Science.gov

Sample records for koritsuka bunseki tool

  1. Percussion tool

    DOEpatents

    Reed, Teddy R.

    2006-11-28

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  2. FORTRAN tools

    NASA Technical Reports Server (NTRS)

    Presser, L.

    1978-01-01

    An integrated set of FORTRAN tools that are commercially available is described. The basic purpose of various tools is summarized and their economic impact highlighted. The areas addressed by these tools include: code auditing, error detection, program portability, program instrumentation, documentation, clerical aids, and quality assurance.

  3. GRIPPING TOOL

    DOEpatents

    Sandrock, R.J.

    1961-12-12

    A self-actuated gripping tool is described for transferring fuel elements and the like into reactors and other inaccessible locations. The tool will grasp or release the load only when properly positioned for this purpose. In addition, the load cannot be released except when unsupported by the tool, so that jarring or contact will not bring about accidental release of the load. The gripping members or jaws of the device are cam-actuated by an axially slidable shaft which has two lockable positions. A spring urges the shaft into one position and a solenoid is provided to overcome the spring and move it into the other position. The weight of the tool operates a sleeve to lock the shaft in its existing position. Only when the cable supporting the tool is slack is the device capable of being actuated either to grasp or release its load. (AEC)

  4. Omics Tools

    SciTech Connect

    Schaumberg, Andrew

    2012-12-21

    The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not contain Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args

  5. Omics Tools

    2012-12-21

    The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not containmore » Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args« less

  6. Management Tools

    NASA Technical Reports Server (NTRS)

    1987-01-01

    Manugistics, Inc. (formerly AVYX, Inc.) has introduced a new programming language for IBM and IBM compatible computers called TREES-pls. It is a resource management tool originating from the space shuttle, that can be used in such applications as scheduling, resource allocation project control, information management, and artificial intelligence. Manugistics, Inc. was looking for a flexible tool that can be applied to many problems with minimal adaptation. Among the non-government markets are aerospace, other manufacturing, transportation, health care, food and beverage and professional services.

  7. Downhole tool

    SciTech Connect

    Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

    2007-03-20

    A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

  8. Cordless Tool

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Apollo-era technology spurred the development of cordless products that we take for granted everyday. In the 1960s, NASA asked Black Decker to develop a special drill that would be powerful enough to cut through hard layers of the lunar surface and be lightweight, compact, and operate under its own power source, allowing Apollo astronauts to collect lunar samples further away from the Lunar Experiment Module. In response, Black Decker developed a computer program that analyzed and optimized drill motor operations. From their analysis, engineers were able to design a motor that was powerful yet required minimal battery power to operate. Since those first days of cordless products, Black Decker has continued to refine this technology and they now sell their rechargeable products worldwide (i.e. the Dustbuster, cordless tools for home and industrial use, and medical tools.)

  9. Tool Gear: Infrastructure for Parallel Tools

    SciTech Connect

    May, J; Gyllenhaal, J

    2003-04-17

    Tool Gear is a software infrastructure for developing performance analysis and other tools. Unlike existing integrated toolkits, which focus on providing a suite of capabilities, Tool Gear is designed to help tool developers create new tools quickly. It combines dynamic instrumentation capabilities with an efficient database and a sophisticated and extensible graphical user interface. This paper describes the design of Tool Gear and presents examples of tools that have been built with it.

  10. Preset pivotal tool holder

    DOEpatents

    Asmanes, Charles

    1979-01-01

    A tool fixture is provided for precise pre-alignment of a radiused edge cutting tool in a tool holder relative to a fixed reference pivot point established on said holder about which the tool holder may be selectively pivoted relative to the fixture base member to change the contact point of the tool cutting edge with a workpiece while maintaining the precise same tool cutting radius relative to the reference pivot point.

  11. Improved tool grinding machine

    DOEpatents

    Dial, C.E. Sr.

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thicknesses may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  12. LensTools: Weak Lensing computing tools

    NASA Astrophysics Data System (ADS)

    Petri, A.

    2016-02-01

    LensTools implements a wide range of routines frequently used in Weak Gravitational Lensing, including tools for image analysis, statistical processing and numerical theory predictions. The package offers many useful features, including complete flexibility and easy customization of input/output formats; efficient measurements of power spectrum, PDF, Minkowski functionals and peak counts of convergence maps; survey masks; artificial noise generation engines; easy to compute parameter statistical inferences; ray tracing simulations; and many others. It requires standard numpy and scipy, and depending on tools used, may require Astropy (ascl:1304.002), emcee (ascl:1303.002), matplotlib, and mpi4py.

  13. Hand tools: A compilation

    NASA Technical Reports Server (NTRS)

    1972-01-01

    A selection of new hand tools, modifications of existing tools, and techniques developed in the course of NASA research and development projects are presented. The items are presented in two sections: tools for cable and connector applications, and tools for welding applications. Safety is emphasized, together with ease of operation and use in restricted areas or hazardous environments. The discussions are directed primarily toward the technician engaged in assembly or maintenance of mechanical or electrical equipment.

  14. OOTW COST TOOLS

    SciTech Connect

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  15. Tools for Achieving TQE.

    ERIC Educational Resources Information Center

    Latta, Raymond F.; Downey, Carolyn J.

    This book presents a wide array of sophisticated problem-solving tools and shows how to use them in a humanizing way that involves all stakeholders in the process. Chapter 1 develops the rationale for educational stakeholders to consider quality tools. Chapter 2 highlights three quality group-process tools--brainstorming, the nominal group…

  16. Fluid sampling tool

    DOEpatents

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    2000-01-01

    A fluid-sampling tool for obtaining a fluid sample from a container. When used in combination with a rotatable drill, the tool bores a hole into a container wall, withdraws a fluid sample from the container, and seals the borehole. The tool collects fluid sample without exposing the operator or the environment to the fluid or to wall shavings from the container.

  17. Software engineering tools.

    PubMed

    Wear, L L; Pinkert, J R

    1994-01-01

    We have looked at general descriptions and illustrations of several software development tools, such as tools for prototyping, developing DFDs, testing, and maintenance. Many others are available, and new ones are being developed. However, you have at least seen some examples of powerful CASE tools for systems development.

  18. Hole-Aligning Tool

    NASA Technical Reports Server (NTRS)

    Collins, Frank A.; Saude, Frank; Sep, Martin J.

    1996-01-01

    Tool designed for use in aligning holes in plates or other structural members to be joined by bolt through holes. Holes aligned without exerting forces perpendicular to planes of holes. Tool features screw-driven-wedge design similar to (but simpler than) that of some automotive exhaust-pipe-expanding tools.

  19. MOD Tool (Microwave Optics Design Tool)

    NASA Technical Reports Server (NTRS)

    Katz, Daniel S.; Borgioli, Andrea; Cwik, Tom; Fu, Chuigang; Imbriale, William A.; Jamnejad, Vahraz; Springer, Paul L.

    1999-01-01

    The Jet Propulsion Laboratory (JPL) is currently designing and building a number of instruments that operate in the microwave and millimeter-wave bands. These include MIRO (Microwave Instrument for the Rosetta Orbiter), MLS (Microwave Limb Sounder), and IMAS (Integrated Multispectral Atmospheric Sounder). These instruments must be designed and built to meet key design criteria (e.g., beamwidth, gain, pointing) obtained from the scientific goals for the instrument. These criteria are frequently functions of the operating environment (both thermal and mechanical). To design and build instruments which meet these criteria, it is essential to be able to model the instrument in its environments. Currently, a number of modeling tools exist. Commonly used tools at JPL include: FEMAP (meshing), NASTRAN (structural modeling), TRASYS and SINDA (thermal modeling), MACOS/IMOS (optical modeling), and POPO (physical optics modeling). Each of these tools is used by an analyst, who models the instrument in one discipline. The analyst then provides the results of this modeling to another analyst, who continues the overall modeling in another discipline. There is a large reengineering task in place at JPL to automate and speed-up the structural and thermal modeling disciplines, which does not include MOD Tool. The focus of MOD Tool (and of this paper) is in the fields unique to microwave and millimeter-wave instrument design. These include initial design and analysis of the instrument without thermal or structural loads, the automation of the transfer of this design to a high-end CAD tool, and the analysis of the structurally deformed instrument (due to structural and/or thermal loads). MOD Tool is a distributed tool, with a database of design information residing on a server, physical optics analysis being performed on a variety of supercomputer platforms, and a graphical user interface (GUI) residing on the user's desktop computer. The MOD Tool client is being developed using Tcl

  20. Orbiter door closure tools

    NASA Technical Reports Server (NTRS)

    Acres, W. R.

    1980-01-01

    Safe reentry of the shuttle orbiter requires that the payload bay doors be closed and securely latched. Since a malfunction in the door drive or bulkhead latch systems could make safe reentry impossible, the requirement to provide tools to manually close and secure the doors was implemented. The tools would disconnect a disabled door or latch closure system and close and secure the doors if the normal system failed. The tools required to perform these tasks have evolved into a set that consists of a tubing cutter, a winch, a latching tool, and a bolt extractor. The design, fabrication, and performance tests of each tool are described.

  1. Robotic tool change mechanism

    NASA Technical Reports Server (NTRS)

    Voellmer, George M. (Inventor)

    1991-01-01

    An assembly of three major components is disclosed which included a wrist interface plate which is secured to the wrist joint of a robotic arm, a tool interface plate which is secured to each tool intended for use by the robotic arm, and a tool holster for each tool attached to the interface plate. The wrist interface plate and a selected tool interface plate are mutually connectable together through an opening or recess in the upper face of the interface plate by means of a notched tongue protruding from the front face of the wrist interface plate which engages a pair of spring-biased rotatable notched wheels located within the body of the tool interface plate. The tool holster captures and locks onto the tool interface plate by means of a pair of actuation claws including a locking tab and an unlocking wedge which operate respective actuation bosses on each of the notched wheels in response to a forward and backward motion of the tool interface plate as a result of motion of the robotic arm to either park the tool or use the tool.

  2. Tool setting device

    DOEpatents

    Brown, Raymond J.

    1977-01-01

    The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

  3. Memory logging tools

    SciTech Connect

    Lysne, P. )

    1993-01-01

    A suite of memory logging tools is being developed for slim-hole, high-temperature applications. The first tool will measure pressure and temperature, and it is especially designed to be a low-cost, but very precise, device. This tool will be smart in the sense that it can make [open quotes]decisions[close quotes] downhole. A second tool will measure the gamma-ray emissions from formation material, and it will be an indicator of lithology. A fluid sampling tool will complement the spectral gamma tool in that is will further constrain the lithology by identifying dissolved formation materials. Plans are being made to integrate the tool responses into formation parameters of interest through cooperative efforts between geothermal operators and scientific drilling programs.

  4. Enterprise integration: A tool`s perspective

    SciTech Connect

    Polito, J.; Jones, A.; Grant, H.

    1993-06-01

    The advent of sophisticated automation equipment and computer hardware and software is changing the way manufacturing is carried out. To compete in the global marketplace, manufacturing companies must integrate these new technologies into their factories. In addition, they must integrate the planning, control, and data management methodologies needed to make effective use of these technologies. This paper provides an overview of recent approaches to achieving this enterprise integration. It then describes, using simulation as a particular example, a new tool`s perspective of enterprise integration.

  5. Machine tool locator

    DOEpatents

    Hanlon, John A.; Gill, Timothy J.

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  6. Lunar hand tools

    NASA Technical Reports Server (NTRS)

    Bentz, Karl F.; Coleman, Robert D.; Dubnik, Kathy; Marshall, William S.; Mcentee, Amy; Na, Sae H.; Patton, Scott G.; West, Michael C.

    1987-01-01

    Tools useful for operations and maintenance tasks on the lunar surface were determined and designed. Primary constraints are the lunar environment, the astronaut's space suit and the strength limits of the astronaut on the moon. A multipurpose rotary motion tool and a collapsible tool carrier were designed. For the rotary tool, a brushless motor and controls were specified, a material for the housing was chosen, bearings and lubrication were recommended and a planetary reduction gear attachment was designed. The tool carrier was designed primarily for ease of access to the tools and fasteners. A material was selected and structural analysis was performed on the carrier. Recommendations were made about the limitations of human performance and about possible attachments to the torque driver.

  7. OEXP Analysis Tools Workshop

    NASA Technical Reports Server (NTRS)

    Garrett, L. Bernard; Wright, Robert L.; Badi, Deborah; Findlay, John T.

    1988-01-01

    This publication summarizes the software needs and available analysis tools presented at the OEXP Analysis Tools Workshop held at the NASA Langley Research Center, Hampton, Virginia on June 21 to 22, 1988. The objective of the workshop was to identify available spacecraft system (and subsystem) analysis and engineering design tools, and mission planning and analysis software that could be used for various NASA Office of Exploration (code Z) studies, specifically lunar and Mars missions.

  8. Authoring tool evaluation

    SciTech Connect

    Wilson, A.L.; Klenk, K.S.; Coday, A.C.; McGee, J.P.; Rivenburgh, R.R.; Gonzales, D.M.; Mniszewski, S.M.

    1994-09-15

    This paper discusses and evaluates a number of authoring tools currently on the market. The tools evaluated are Visix Galaxy, NeuronData Open Interface Elements, Sybase Gain Momentum, XVT Power++, Aimtech IconAuthor, Liant C++/Views, and Inmark Technology zApp. Also discussed is the LIST project and how this evaluation is being used to fit an authoring tool to the project.

  9. Double diameter boring tool

    DOEpatents

    Ashbaugh, Fred N.; Murry, Kenneth R.

    1988-12-27

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  10. Demand Response Dispatch Tool

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for bothmore » reliability and economic conditions.« less

  11. Chimera Grid Tools

    NASA Technical Reports Server (NTRS)

    Chan, William M.; Rogers, Stuart E.; Nash, Steven M.; Buning, Pieter G.; Meakin, Robert

    2005-01-01

    Chimera Grid Tools (CGT) is a software package for performing computational fluid dynamics (CFD) analysis utilizing the Chimera-overset-grid method. For modeling flows with viscosity about geometrically complex bodies in relative motion, the Chimera-overset-grid method is among the most computationally cost-effective methods for obtaining accurate aerodynamic results. CGT contains a large collection of tools for generating overset grids, preparing inputs for computer programs that solve equations of flow on the grids, and post-processing of flow-solution data. The tools in CGT include grid editing tools, surface-grid-generation tools, volume-grid-generation tools, utility scripts, configuration scripts, and tools for post-processing (including generation of animated images of flows and calculating forces and moments exerted on affected bodies). One of the tools, denoted OVERGRID, is a graphical user interface (GUI) that serves to visualize the grids and flow solutions and provides central access to many other tools. The GUI facilitates the generation of grids for a new flow-field configuration. Scripts that follow the grid generation process can then be constructed to mostly automate grid generation for similar configurations. CGT is designed for use in conjunction with a computer-aided-design program that provides the geometry description of the bodies, and a flow-solver program.

  12. Air Sparging Decision Tool

    1996-06-10

    The Air Sparging Decision Tool is a computer decision aid to help environmental managers and field practitioners in evaluating the applicability of air sparging to a wide range of sites and for refining the operation of air sparging systems. The program provides tools for the practitioner to develop the conceptual design for an air sparging system suitable for the identified site. The Tool provides a model of the decision making process, not a detailed designmore » of air sparging systems. The Tool will quickly and cost effectively assist the practitioner in screening for applicability of the technology at a proposed site.« less

  13. Demand Response Analysis Tool

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be usedmore » by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.« less

  14. Tool use as adaptation

    PubMed Central

    Biro, Dora; Haslam, Michael; Rutz, Christian

    2013-01-01

    Tool use is a vital component of the human behavioural repertoire. The benefits of tool use have often been assumed to be self-evident: by extending control over our environment, we have increased energetic returns and buffered ourselves from potentially harmful influences. In recent decades, however, the study of tool use in both humans and non-human animals has expanded the way we think about the role of tools in the natural world. This Theme Issue is aimed at bringing together this developing body of knowledge, gathered across multiple species and from multiple research perspectives, to chart the wider evolutionary context of this phylogenetically rare behaviour. PMID:24101619

  15. Manifold tool guide

    DOEpatents

    Djordjevic, A.

    1982-07-08

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  16. Manifold tool guide

    DOEpatents

    Djordjevic, A.

    1983-12-27

    A tool guide is described that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into the cross pipe for cleaning, inspection, etc. 3 figs.

  17. Manifold tool guide

    DOEpatents

    Djordjevic, Aleksandar

    1983-12-27

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  18. ATAMM analysis tool

    NASA Technical Reports Server (NTRS)

    Jones, Robert; Stoughton, John; Mielke, Roland

    1991-01-01

    Diagnostics software for analyzing Algorithm to Architecture Mapping Model (ATAMM) based concurrent processing systems is presented. ATAMM is capable of modeling the execution of large grain algorithms on distributed data flow architectures. The tool graphically displays algorithm activities and processor activities for evaluation of the behavior and performance of an ATAMM based system. The tool's measurement capabilities indicate computing speed, throughput, concurrency, resource utilization, and overhead. Evaluations are performed on a simulated system using the software tool. The tool is used to estimate theoretical lower bound performance. Analysis results are shown to be comparable to the predictions.

  19. Double diameter boring tool

    DOEpatents

    Ashbaugh, F.A.; Murry, K.R.

    1986-02-10

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  20. Tube flare inspection tool

    NASA Technical Reports Server (NTRS)

    Meunier, G. E.

    1980-01-01

    Flare angle and symmetry of tube ends can be checked by simple tool that consists of two stainless steel pins bonded to rubber plug. Primary function of tool is to inspect tubes before they are installed, thereby eliminating expense and inconvenience of repairing leaks caused by imperfect flares. Measuring hole tapers, countersink angles, and bearing race angles are other possible uses. Tool is used with optical comparator. Axis of tool is alined with centerline of tube. Shadow of seated pins on comparator screen allows operator to verify flare angle is within tolerance.

  1. Tool use as adaptation.

    PubMed

    Biro, Dora; Haslam, Michael; Rutz, Christian

    2013-11-19

    Tool use is a vital component of the human behavioural repertoire. The benefits of tool use have often been assumed to be self-evident: by extending control over our environment, we have increased energetic returns and buffered ourselves from potentially harmful influences. In recent decades, however, the study of tool use in both humans and non-human animals has expanded the way we think about the role of tools in the natural world. This Theme Issue is aimed at bringing together this developing body of knowledge, gathered across multiple species and from multiple research perspectives, to chart the wider evolutionary context of this phylogenetically rare behaviour.

  2. Benchmarking Tool Kit.

    ERIC Educational Resources Information Center

    Canadian Health Libraries Association.

    Nine Canadian health libraries participated in a pilot test of the Benchmarking Tool Kit between January and April, 1998. Although the Tool Kit was designed specifically for health libraries, the content and approach are useful to other types of libraries as well. Used to its full potential, benchmarking can provide a common measuring stick to…

  3. Tool Storage Problem Solved!

    ERIC Educational Resources Information Center

    Klenke, Andrew M.; Dell, Tim W.

    2007-01-01

    Graduates of the automotive technology program at Pittsburg State University (PSU) generally enter the workforce in some type of automotive management role. As a result, the program does not require students to purchase their own tools, and it does not have room for all 280 majors to roll around a personal tool chest. Each instructor must maintain…

  4. Fluid sampling tool

    DOEpatents

    Johnston, Roger G.; Garcia, Anthony R. E.; Martinez, Ronald K.

    2001-09-25

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  5. OOTW Force Design Tools

    SciTech Connect

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  6. Diamond Smoothing Tools

    NASA Technical Reports Server (NTRS)

    Voronov, Oleg

    2007-01-01

    Diamond smoothing tools have been proposed for use in conjunction with diamond cutting tools that are used in many finish-machining operations. Diamond machining (including finishing) is often used, for example, in fabrication of precise metal mirrors. A diamond smoothing tool according to the proposal would have a smooth spherical surface. For a given finish machining operation, the smoothing tool would be mounted next to the cutting tool. The smoothing tool would slide on the machined surface left behind by the cutting tool, plastically deforming the surface material and thereby reducing the roughness of the surface, closing microcracks and otherwise generally reducing or eliminating microscopic surface and subsurface defects, and increasing the microhardness of the surface layer. It has been estimated that if smoothing tools of this type were used in conjunction with cutting tools on sufficiently precise lathes, it would be possible to reduce the roughness of machined surfaces to as little as 3 nm. A tool according to the proposal would consist of a smoothing insert in a metal holder. The smoothing insert would be made from a diamond/metal functionally graded composite rod preform, which, in turn, would be made by sintering together a bulk single-crystal or polycrystalline diamond, a diamond powder, and a metallic alloy at high pressure. To form the spherical smoothing tip, the diamond end of the preform would be subjected to flat grinding, conical grinding, spherical grinding using diamond wheels, and finally spherical polishing and/or buffing using diamond powders. If the diamond were a single crystal, then it would be crystallographically oriented, relative to the machining motion, to minimize its wear and maximize its hardness. Spherically polished diamonds could also be useful for purposes other than smoothing in finish machining: They would likely also be suitable for use as heat-resistant, wear-resistant, unlubricated sliding-fit bearing inserts.

  7. Eclipse Parallel Tools Platform

    2005-02-18

    Designing and developing parallel programs is an inherently complex task. Developers must choose from the many parallel architectures and programming paradigms that are available, and face a plethora of tools that are required to execute, debug, and analyze parallel programs i these environments. Few, if any, of these tools provide any degree of integration, or indeed any commonality in their user interfaces at all. This further complicates the parallel developer's task, hampering software engineering practices,more » and ultimately reducing productivity. One consequence of this complexity is that best practice in parallel application development has not advanced to the same degree as more traditional programming methodologies. The result is that there is currently no open-source, industry-strength platform that provides a highly integrated environment specifically designed for parallel application development. Eclipse is a universal tool-hosting platform that is designed to providing a robust, full-featured, commercial-quality, industry platform for the development of highly integrated tools. It provides a wide range of core services for tool integration that allow tool producers to concentrate on their tool technology rather than on platform specific issues. The Eclipse Integrated Development Environment is an open-source project that is supported by over 70 organizations, including IBM, Intel and HP. The Eclipse Parallel Tools Platform (PTP) plug-in extends the Eclipse framwork by providing support for a rich set of parallel programming languages and paradigms, and a core infrastructure for the integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration, support for a small number of parallel architectures

  8. AN Fitting Reconditioning Tool

    NASA Technical Reports Server (NTRS)

    Lopez, Jason

    2011-01-01

    A tool was developed to repair or replace AN fittings on the shuttle external tank (ET). (The AN thread is a type of fitting used to connect flexible hoses and rigid metal tubing that carry fluid. It is a U.S. military-derived specification agreed upon by the Army and Navy, hence AN.) The tool is used on a drill and is guided by a pilot shaft that follows the inside bore. The cutting edge of the tool is a standard-size replaceable insert. In the typical Post Launch Maintenance/Repair process for the AN fittings, the six fittings are removed from the ET's GUCP (ground umbilical carrier plate) for reconditioning. The fittings are inspected for damage to the sealing surface per standard operations maintenance instructions. When damage is found on the sealing surface, the condition is documented. A new AN reconditioning tool is set up to cut and remove the surface damage. It is then inspected to verify the fitting still meets drawing requirements. The tool features a cone-shaped interior at 36.5 , and may be adjusted at a precise angle with go-no-go gauges to insure that the cutting edge could be adjusted as it wore down. One tool, one setting block, and one go-no-go gauge were fabricated. At the time of this reporting, the tool has reconditioned/returned to spec 36 AN fittings with 100-percent success of no leakage. This tool provides a quick solution to repair a leaky AN fitting. The tool could easily be modified with different-sized pilot shafts to different-sized fittings.

  9. Tool Gear: Infrastructure for Building Parallel Programming Tools

    SciTech Connect

    May, J M; Gyllenhaal, J

    2002-12-09

    Tool Gear is a software infrastructure for developing performance analysis and other tools. Unlike existing integrated toolkits, which focus on providing a suite of capabilities, Tool Gear is designed to help tool developers create new tools quickly. It combines dynamic instrumentation capabilities with an efficient database and a sophisticated and extensible graphical user interface. This paper describes the design of Tool Gear and presents examples of tools that have been built with it.

  10. Interactive knowledge acquisition tools

    NASA Technical Reports Server (NTRS)

    Dudziak, Martin J.; Feinstein, Jerald L.

    1987-01-01

    The problems of designing practical tools to aid the knowledge engineer and general applications used in performing knowledge acquisition tasks are discussed. A particular approach was developed for the class of knowledge acquisition problem characterized by situations where acquisition and transformation of domain expertise are often bottlenecks in systems development. An explanation is given on how the tool and underlying software engineering principles can be extended to provide a flexible set of tools that allow the application specialist to build highly customized knowledge-based applications.

  11. Graphitic packing removal tool

    SciTech Connect

    Meyers, K.E.; Kolsun, G.J.

    1996-12-31

    Graphitic packing removal tools are described for removal of the seal rings in one piece from valves and pumps. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

  12. Machine Tool Software

    NASA Technical Reports Server (NTRS)

    1988-01-01

    A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

  13. Graphitic packing removal tool

    DOEpatents

    Meyers, K.E.; Kolsun, G.J.

    1997-11-11

    Graphitic packing removal tools for removal of the seal rings in one piece are disclosed. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal. 5 figs.

  14. Graphitic packing removal tool

    DOEpatents

    Meyers, Kurt Edward; Kolsun, George J.

    1997-01-01

    Graphitic packing removal tools for removal of the seal rings in one piece. he packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

  15. Regulatory sequence analysis tools.

    PubMed

    van Helden, Jacques

    2003-07-01

    The web resource Regulatory Sequence Analysis Tools (RSAT) (http://rsat.ulb.ac.be/rsat) offers a collection of software tools dedicated to the prediction of regulatory sites in non-coding DNA sequences. These tools include sequence retrieval, pattern discovery, pattern matching, genome-scale pattern matching, feature-map drawing, random sequence generation and other utilities. Alternative formats are supported for the representation of regulatory motifs (strings or position-specific scoring matrices) and several algorithms are proposed for pattern discovery. RSAT currently holds >100 fully sequenced genomes and these data are regularly updated from GenBank.

  16. Machine tools get smarter

    SciTech Connect

    Valenti, M.

    1995-11-01

    This article describes how, using software, sensors, and controllers, a new generation of intelligent machine tools are optimizing grinding, milling, and molding processes. A paradox of manufacturing parts is that the faster the parts are made, the less accurate they are--and vice versa. However, a combination of software, sensors, controllers, and mechanical innovations are being used to create a new generation of intelligent machine tools capable of optimizing their own grinding, milling, and molding processes. These brainy tools are allowing manufacturers to machine more-complex, higher-quality parts in shorter cycle times. The technology also lowers scrap rates and reduces or eliminates the need for polishing inadequately finished parts.

  17. PV Hourly Simulation Tool

    SciTech Connect

    Dean, Jesse; Metzger, Ian

    2010-12-31

    This software requires inputs of simple general building characteristics and usage information to calculate the energy and cost benefits of solar PV. This tool conducts and complex hourly simulation of solar PV based primarily on the area available on the rooftop. It uses a simplified efficiency calculation method and real panel characteristics. It includes a detailed rate structure to account for time-of-use rates, on-peak and off-peak pricing, and multiple rate seasons. This tool includes the option for advanced system design inputs if they are known. This tool calculates energy savings, demand reduction, cost savings, incentives and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  18. Smart tool holder

    DOEpatents

    Day, Robert Dean; Foreman, Larry R.; Hatch, Douglas J.; Meadows, Mark S.

    1998-01-01

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

  19. Sequence History Update Tool

    NASA Technical Reports Server (NTRS)

    Khanampompan, Teerapat; Gladden, Roy; Fisher, Forest; DelGuercio, Chris

    2008-01-01

    The Sequence History Update Tool performs Web-based sequence statistics archiving for Mars Reconnaissance Orbiter (MRO). Using a single UNIX command, the software takes advantage of sequencing conventions to automatically extract the needed statistics from multiple files. This information is then used to populate a PHP database, which is then seamlessly formatted into a dynamic Web page. This tool replaces a previous tedious and error-prone process of manually editing HTML code to construct a Web-based table. Because the tool manages all of the statistics gathering and file delivery to and from multiple data sources spread across multiple servers, there is also a considerable time and effort savings. With the use of The Sequence History Update Tool what previously took minutes is now done in less than 30 seconds, and now provides a more accurate archival record of the sequence commanding for MRO.

  20. Personal Wellness Tools

    MedlinePlus

    ... Agitation Kit for Medical Staff Publications for Your Office Mental Health Research Learn About Research Find Research Studies Peer Support Research WeSearchTogether Personal Wellness Tools The Merriam-Webster dictionary gives several definitions for ...

  1. Oracle Management Tool Suite

    SciTech Connect

    Rivenes, Any

    2007-06-01

    The Oracle Management Tool Suite is used to automatically manage Oracle based systems. This includes startup and shutdown of databases and application servers as well as backup, space management, workload management and log file management.

  2. Laser Prepared Cutting Tools

    NASA Astrophysics Data System (ADS)

    Konrad, Wegener; Claus, Dold; Marcel, Henerichs; Christian, Walter

    Laser pulses with a pulsewidth of a few picoseconds have recently received a lot of attention, solving the problem of manufacturing tools for new materials of superior mechanical properties. Processing thermally sensitive material, such as diamond and CBN structures, can be done without major material deterioration effects. The breakthrough of this new technology becomes possible, if the accuracy and life time requirements of those tools are met. The paper shows in three applications the potential of laser manufacturing of cutting tools. Manufacturing of cutting edges for CFRP cutting needs sharp and stable cutting edges, which are prepared in PCD tools by laser sources in the picosecond pulsewidth regime. Profiling of hybrid bond grinding wheels yields geometric flexibility, which is impossible by mechanical treatment so far. Touch dressing of grinding wheels substantially reduces cutting forces.

  3. Friction stir welding tool

    DOEpatents

    Tolle; Charles R. , Clark; Denis E. , Barnes; Timothy A.

    2008-04-15

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  4. Selecting Appropriate Computing Tools.

    ERIC Educational Resources Information Center

    Tetlow, William L.

    1990-01-01

    Selecting computer tools requires analyzing information requirements and audiences, assessing existing institutional research and computing capacities, creating or improving a planning database, using computer experts, determining software needs, obtaining sufficient resources for independent operations, acquiring quality, and insisting on…

  5. Two Egyptian Construction Tools.

    ERIC Educational Resources Information Center

    Lamb, John F., Jr.

    1993-01-01

    Describes the geometric concepts involved in two construction tools used in ancient Egypt. A level is used to make a construction horizontal, and the plumb level is used to make a construction vertical. (MDH)

  6. PV Hourly Simulation Tool

    2010-12-31

    This software requires inputs of simple general building characteristics and usage information to calculate the energy and cost benefits of solar PV. This tool conducts and complex hourly simulation of solar PV based primarily on the area available on the rooftop. It uses a simplified efficiency calculation method and real panel characteristics. It includes a detailed rate structure to account for time-of-use rates, on-peak and off-peak pricing, and multiple rate seasons. This tool includes themore » option for advanced system design inputs if they are known. This tool calculates energy savings, demand reduction, cost savings, incentives and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.« less

  7. Glass tube splitting tool

    NASA Technical Reports Server (NTRS)

    Klein, J. A.; Murray, C. D.; Stein, J. A.

    1971-01-01

    Tool accurately splits glass tubing so cuts are aligned 180 deg apart and reassembled tube forms low pressure, gastight enclosure. Device should interest industries using cylindrical closed glass containers.

  8. Immediate tool incorporation processes determine human motor planning with tools.

    PubMed

    Ganesh, G; Yoshioka, T; Osu, R; Ikegami, T

    2014-01-01

    Human dexterity with tools is believed to stem from our ability to incorporate and use tools as parts of our body. However tool incorporation, evident as extensions in our body representation and peri-personal space, has been observed predominantly after extended tool exposures and does not explain our immediate motor behaviours when we change tools. Here we utilize two novel experiments to elucidate the presence of additional immediate tool incorporation effects that determine motor planning with tools. Interestingly, tools were observed to immediately induce a trial-by-trial, tool length dependent shortening of the perceived limb lengths, opposite to observations of elongations after extended tool use. Our results thus exhibit that tools induce a dual effect on our body representation; an immediate shortening that critically affects motor planning with a new tool, and the slow elongation, probably a consequence of skill related changes in sensory-motor mappings with the repeated use of the tool. PMID:25077612

  9. Smart surgical tool

    NASA Astrophysics Data System (ADS)

    Huang, Huan; Yang, Lih-Mei; Bai, Shuang; Liu, Jian

    2015-02-01

    A laser-induced breakdown spectroscopy (LIBS) guided smart surgical tool using a femtosecond fiber laser is developed. This system provides real-time material identification by processing and analyzing the peak intensity and ratio of atomic emissions of LIBS signals. Algorithms to identify emissions of different tissues and metals are developed and implemented into the real-time control system. This system provides a powerful smart surgical tool for precise robotic microsurgery applications with real-time feedback and control.

  10. Tools used for hand deburring

    SciTech Connect

    Gillespie, L.K.

    1981-03-01

    This guide is designed to help in quick identification of those tools most commonly used to deburr hand size or smaller parts. Photographs and textual descriptions are used to provide rapid yet detailed information. The data presented include the Bendix Kansas City Division coded tool number, tool description, tool crib in which the tool can be found, the maximum and minimum inventory requirements, the cost of each tool, and the number of the illustration that shows the tool.

  11. Tool Gear Documentation

    SciTech Connect

    May, J; Gyllenhaal, J

    2002-04-03

    Tool Gear is designed to allow tool developers to insert instrumentation code into target programs using the DPCL library. This code can gather data and send it back to the Client for display or analysis. Tools can use the Tool Gear client without using the DPCL Collector. Any collector using the right protocols can send data to the Client for display and analysis. However, this document will focus on how to gather data with the DPCL Collector. There are three parts to the task of using Tool Gear to gather data through DPCL: (1) Write the instrumentation code that will be loaded and run in the target program. The code should be in the form of one or more functions, which can pass data structures back to the Client by way of DPCL. The collections of functions is compiled into a library, as described in this report. (2) Write the code that tells the DPCL Collector about the instrumentation and how to forward data back to the Client. (3) Extend the client to accept data from the Collector and display it in a useful way. The rest of this report describes how to carry out each of these steps.

  12. Astronomer's Proposal Tool

    NASA Technical Reports Server (NTRS)

    Krueger, Tony

    2005-01-01

    Astronomer's Proposal Tool (APT) is a computer program that assists astronomers in preparing their Phase 1 and Phase 2 Hubble Space Telescope science programs. APT is a successor to the Remote Proposal Submission System 2 (RPS2) program, which has been rendered obsolete by more recent advances in computer software and hardware. APT exploits advances associated with widespread use of the Internet, multiplatform visual development software tools, and overall increases in the power of desktop computer hardware, all in such a way as to make the preparation and submission of proposals more intuitive and make observatory operations less cumbersome. APT provides documentation and help that are friendly, up to date, and easily accessible to users of varying levels of expertise, while defining an extensible framework that is responsive to changes in both technology and observatory operations. APT consists of two major components: (1) a set of software tools that are intuitive, visual, and responsive and (2) an integrated software environment that unifies all the tools and makes them interoperable. The APT tools include the Visual Target Tuner, Proposal Editor, Exposure Planner, Bright Object Checker, and Visit Planner.

  13. Image tools for UNIX

    NASA Technical Reports Server (NTRS)

    Banks, David C.

    1994-01-01

    This talk features two simple and useful tools for digital image processing in the UNIX environment. They are xv and pbmplus. The xv image viewer which runs under the X window system reads images in a number of different file formats and writes them out in different formats. The view area supports a pop-up control panel. The 'algorithms' menu lets you blur an image. The xv control panel also activates the color editor which displays the image's color map (if one exists). The xv image viewer is available through the internet. The pbmplus package is a set of tools designed to perform image processing from within a UNIX shell. The acronym 'pbm' stands for portable bit map. Like xv, the pbm plus tool can convert images from and to many different file formats. The source code and manual pages for pbmplus are also available through the internet. This software is in the public domain.

  14. Core-Cutoff Tool

    NASA Technical Reports Server (NTRS)

    Gheen, Darrell

    2007-01-01

    A tool makes a cut perpendicular to the cylindrical axis of a core hole at a predetermined depth to free the core at that depth. The tool does not damage the surrounding material from which the core was cut, and it operates within the core-hole kerf. Coring usually begins with use of a hole saw or a hollow cylindrical abrasive cutting tool to make an annular hole that leaves the core (sometimes called the plug ) in place. In this approach to coring as practiced heretofore, the core is removed forcibly in a manner chosen to shear the core, preferably at or near the greatest depth of the core hole. Unfortunately, such forcible removal often damages both the core and the surrounding material (see Figure 1). In an alternative prior approach, especially applicable to toxic or fragile material, a core is formed and freed by means of milling operations that generate much material waste. In contrast, the present tool eliminates the damage associated with the hole-saw approach and reduces the extent of milling operations (and, hence, reduces the waste) associated with the milling approach. The present tool (see Figure 2) includes an inner sleeve and an outer sleeve and resembles the hollow cylindrical tool used to cut the core hole. The sleeves are thin enough that this tool fits within the kerf of the core hole. The inner sleeve is attached to a shaft that, in turn, can be attached to a drill motor or handle for turning the tool. This tool also includes a cutting wire attached to the distal ends of both sleeves. The cutting wire is long enough that with sufficient relative rotation of the inner and outer sleeves, the wire can cut all the way to the center of the core. The tool is inserted in the kerf until its distal end is seated at the full depth. The inner sleeve is then turned. During turning, frictional drag on the outer core pulls the cutting wire into contact with the core. The cutting force of the wire against the core increases with the tension in the wire and

  15. Cataract Surgery Tool

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The NASA-McGannon cataract surgery tool is a tiny cutter-pump which liquefies and pumps the cataract lens material from the eye. Inserted through a small incision in the cornea, the tool can be used on the hardest cataract lens. The cutter is driven by a turbine which operates at about 200,000 revolutions per minute. Incorporated in the mechanism are two passages for saline solutions, one to maintain constant pressure within the eye, the other for removal of the fragmented lens material and fluids. Three years of effort have produced a design, now being clinically evaluated, with excellent potential for improved cataract surgery. The use of this tool is expected to reduce the patient's hospital stay and recovery period significantly.

  16. RSP Tooling Technology

    SciTech Connect

    2001-11-20

    RSP Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica (Figure 1). This is followed by spray forming a thick deposit of a tooling alloy on the pattern to capture the desired shape, surface texture, and detail. The resultant metal block is cooled to room temperature and separated from the pattern. The deposit's exterior walls are machined square, allowing it to be used as an insert in a standard mold base. The overall turnaround time for tooling is about 3 to 5 days, starting with a master. Molds and dies produced in this way have been used in high volume production runs in plastic injection molding and die casting. A Cooperative Research and Development Agreement (CRADA) between the Idaho National Engineering and Environmental Laboratory (INEEL) and Grupo Vitro has been established to evaluate the feasibility of using RSP Tooling technology for producing molds and dies of interest to Vitro. This report summarizes results from Phase I of this agreement, and describes work scope and budget for Phase I1 activities. The main objective in Phase I was to demonstrate the feasibility of applying the Rapid Solidification Process (RSP) Tooling method to produce molds for the manufacture of glass and other components of interest to Vitro. This objective was successfully achieved.

  17. Swift Science Analysis Tools

    NASA Astrophysics Data System (ADS)

    Marshall, F. E.; Swift Team Team

    2003-05-01

    Swift is an autonomous, multiwavelength observatory selected by NASA to study gamma-ray bursts (GRBs) and their afterglows. Its Burst Alert Telescope (BAT) is a large coded mask instrument that will image GRBs in the 15 to 150 keV band. The X-ray Telescope (XRT) focuses X-rays in the 0.2 to 10 keV band onto CCDs, and the co-aligned Ultra-Violet/Optical Telescope (UVOT) has filters and grisms for low-resolution spectroscopy. The Swift team is developing mission-specific tools for processing the telemetry into FITS files and for calibrating and selecting the data for further analysis with such mission-independent tools as XIMAGE and XSPEC. The FTOOLS-based suite of tools will be released to the community before launch with additional updates after launch. Documentation for the tools and standard receipes for their use will be available on the Swift Science Center (SSC) Web site (http://swiftsc.gsfc.nasa.gov), and the SSC will provide user assistance with an e-mail help desk. After the verification phase of the mission, all data will be available to the community as soon as it is processed in the Swift Data Center (SDC). Once all the data for an observation is available, the data will be transferred to the HEASARC and data centers in England and Italy. The data can then be searched and accessed using standard tools such as Browse. Before this transfer the quick-look data will be available on an ftp site at the SDC. The SSC will also provide documentation and simulation tools in support of the Swift Guest Investigator program.

  18. Drum lid removal tool

    DOEpatents

    Pella, Bernard M.; Smith, Philip D.

    2010-08-24

    A tool for removing the lid of a metal drum wherein the lid is clamped over the drum rim without protruding edges, the tool having an elongated handle with a blade carried by an angularly positioned holder affixed to the midsection of the handle, the blade being of selected width to slice between lid lip and the drum rim and, when the blade is so positioned, upward motion of the blade handle will cause the blade to pry the lip from the rim and allow the lid to be removed.

  19. The GNEMRE Dendro Tool.

    SciTech Connect

    Merchant, Bion John

    2007-10-01

    The GNEMRE Dendro Tool provides a previously unrealized analysis capability in the field of nuclear explosion monitoring. Dendro Tool allows analysts to quickly and easily determine the similarity between seismic events using the waveform time-series for each of the events to compute cross-correlation values. Events can then be categorized into clusters of similar events. This analysis technique can be used to characterize historical archives of seismic events in order to determine many of the unique sources that are present. In addition, the source of any new events can be quickly identified simply by comparing the new event to the historical set.

  20. PCard Data Analysis Tool

    SciTech Connect

    Hilts, Jim

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes, Email status (date sent, response), audit resolution.

  1. CFD Multiphysics Tool

    NASA Technical Reports Server (NTRS)

    Perrell, Eric R.

    2005-01-01

    The recent bold initiatives to expand the human presence in space require innovative approaches to the design of propulsion systems whose underlying technology is not yet mature. The space propulsion community has identified a number of candidate concepts. A short list includes solar sails, high-energy-density chemical propellants, electric and electromagnetic accelerators, solar-thermal and nuclear-thermal expanders. For each of these, the underlying physics are relatively well understood. One could easily cite authoritative texts, addressing both the governing equations, and practical solution methods for, e.g. electromagnetic fields, heat transfer, radiation, thermophysics, structural dynamics, particulate kinematics, nuclear energy, power conversion, and fluid dynamics. One could also easily cite scholarly works in which complete equation sets for any one of these physical processes have been accurately solved relative to complex engineered systems. The Advanced Concepts and Analysis Office (ACAO), Space Transportation Directorate, NASA Marshall Space Flight Center, has recently released the first alpha version of a set of computer utilities for performing the applicable physical analyses relative to candidate deep-space propulsion systems such as those listed above. PARSEC, Preliminary Analysis of Revolutionary in-Space Engineering Concepts, enables rapid iterative calculations using several physics tools developed in-house. A complete cycle of the entire tool set takes about twenty minutes. PARSEC is a level-zero/level-one design tool. For PARSEC s proof-of-concept, and preliminary design decision-making, assumptions that significantly simplify the governing equation sets are necessary. To proceed to level-two, one wishes to retain modeling of the underlying physics as close as practical to known applicable first principles. This report describes results of collaboration between ACAO, and Embry-Riddle Aeronautical University (ERAU), to begin building a set of

  2. CMS tracker visualization tools

    NASA Astrophysics Data System (ADS)

    Mennea, M. S.; Osborne, I.; Regano, A.; Zito, G.

    2005-08-01

    This document will review the design considerations, implementations and performance of the CMS Tracker Visualization tools. In view of the great complexity of this sub-detector (more than 50 millions channels organized in 16540 modules each one of these being a complete detector), the standard CMS visualization tools (IGUANA and IGUANACMS) that provide basic 3D capabilities and integration within CMS framework, respectively, have been complemented with additional 2D graphics objects. Based on the experience acquired using this software to debug and understand both hardware and software during the construction phase, we propose possible future improvements to cope with online monitoring and event analysis during data taking.

  3. PCard Data Analysis Tool

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes,more » Email status (date sent, response), audit resolution.« less

  4. Nitrogen Trading Tool (NTT)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Natural Resources Conservation Service (NRCS) recently developed a prototype web-based nitrogen trading tool to facilitate water quality credit trading. The development team has worked closely with the Agriculture Research Service Soil Plant Nutrient Research Unit (ARS-SPNR) and the Environmenta...

  5. Workplace Counseling Tools.

    ERIC Educational Resources Information Center

    Kirk, James J.; Woody, Connie; Burns, Naomi; Howard, Sherrie; Rice, Misty

    This publication describes counseling approaches supervisors and human resource professionals can use to help marginal employees become better adjusted and more productive in the workplace. Three case studies are also provided for training purposes. The counseling tools are as follows: (1) Adlerian counseling, involving the belief that humans'…

  6. Poetry-Teaching Tools.

    ERIC Educational Resources Information Center

    Murray, John J.

    1965-01-01

    Three game approaches to the teaching of poetry, designed to make the student actively involved with poems are described as "teaching tools." The semantico-dictionary or word-cross game involves programing techniques, logic, and lexicography in poetic analysis. The punched-out poem game involves filling in the blanks of a poem in which all the…

  7. Clean Cities Tools

    SciTech Connect

    2014-12-19

    The U.S. Department of Energy's Clean Cities offers a large collection of Web-based tools on the Alternative Fuels Data Center. These calculators, interactive maps, and data searches can assist fleets, fuels providers, and other transportation decision makers in their efforts to reduce petroleum use.

  8. Sight Application Analysis Tool

    SciTech Connect

    Bronevetsky, G.

    2014-09-17

    The scale and complexity of scientific applications makes it very difficult to optimize, debug and extend them to support new capabilities. We have developed a tool that supports developers’ efforts to understand the logical flow of their applications and interactions between application components and hardware in a way that scales with application complexity and parallelism.

  9. Chizu Task Mapping Tool

    SciTech Connect

    2014-07-01

    Chizu is a tool for Mapping MPI processes or tasks to physical processors or nodes for optimizing communication performance. It takes the communication graph of a High Performance Computing (HPC) application and the interconnection topology of a supercomputer as input. It outputs a new MPI rand to processor mapping, which can be used when launching the HPC application.

  10. Smart tool holder

    DOEpatents

    Day, R.D.; Foreman, L.R.; Hatch, D.J.; Meadows, M.S.

    1998-09-08

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut. 3 figs.

  11. Next Generation CTAS Tools

    NASA Technical Reports Server (NTRS)

    Erzberger, Heinz

    2000-01-01

    The FAA's Free Flight Phase 1 Office is in the process of deploying the current generation of CTAS tools, which are the Traffic Management Advisor (TMA) and the passive Final Approach Spacing Tool (pFAST), at selected centers and airports. Research at NASA is now focussed on extending the CTAS software and computer human interfaces to provide more advanced capabilities. The Multi-center TMA (McTMA) is designed to operate at airports where arrival flows originate from two or more centers whose boundaries are in close proximity to the TRACON boundary. McTMA will also include techniques for routing arrival flows away from congested airspace and around airspace reserved for arrivals into other hub airports. NASA is working with FAA and MITRE to build a prototype McTMA for the Philadelphia airport. The active Final Approach Spacing Tool (aFAST) provides speed and heading advisories to help controllers achieve accurate spacing between aircraft on final approach. These advisories will be integrated with those in the existing pFAST to provide a set of comprehensive advisories for controlling arrival traffic from the TRACON boundary to touchdown at complex, high-capacity airports. A research prototype of aFAST, designed for the Dallas-Fort Worth is in an advanced stage of development. The Expedite Departure Path (EDP) and Direct-To tools are designed to help controllers guide departing aircraft out of the TRACON airspace and to climb to cruise altitude along the most efficient routes.

  12. MULTIPLE SHAFT TOOL HEAD

    DOEpatents

    Colbert, H.P.

    1962-10-23

    An improved tool head arrangement is designed for the automatic expanding of a plurality of ferruled tubes simultaneously. A plurality of output shafts of a multiple spindle drill head are driven in unison by a hydraulic motor. A plurality of tube expanders are respectively coupled to the shafts through individual power train arrangements. The axial or thrust force required for the rolling operation is provided by a double acting hydraulic cylinder having a hollow through shaft with the shaft cooperating with an internally rotatable splined shaft slidably coupled to a coupling rigidly attached to the respectlve output shaft of the drill head, thereby transmitting rotary motion and axial thrust simultaneously to the tube expander. A hydraulic power unit supplies power to each of the double acting cylinders through respective two-position, four-way valves, under control of respective solenoids for each of the cylinders. The solenoids are in turn selectively controlled by a tool selection control unit which in turn is controlled by signals received from a programmed, coded tape from a tape reader. The number of expanders that are extended in a rolling operation, which may be up to 42 expanders, is determined by a predetermined program of operations depending upon the arrangement of the ferruled tubes to be expanded in the tube bundle. The tape reader also supplies dimensional information to a machine tool servo control unit for imparting selected, horizontal and/or vertical movement to the tool head assembly. (AEC)

  13. Reverb Search Tool

    Atmospheric Science Data Center

    2016-10-05

    Description:  Search and order ASDC and Earth science data from various NASA and affiliated centers. Search and order options: project, parameter, data set, geographic region and ... Reverb will soon be retired. Please query the Earthdata Search Tool for your desired products. Details:  ...

  14. Tools of the Trade

    ERIC Educational Resources Information Center

    Arnold, Kathy

    2012-01-01

    This article outlines the author's efforts to build her knowledge of students' understandings of mathematics whilst catering for different abilities within a Year 1 classroom, using the freely available "Assessment for Common Misunderstandings tools." "The Assessment for Common Misunderstandings" materials have been "designed to assist teachers…

  15. Frequency Response Tool

    SciTech Connect

    Etingov, Pavel; Chassin, PNNL David; Zhang, PNNL Yu; PNNL,

    2014-03-13

    According to the North American Electric Reliability Corporation (NERC) definition: “Frequency response is a measure of an Interconnection’s ability to stabilize frequency immediately following the sudden loss of generation or load, and is a critical component of the reliable operation of the Bulk-Power System, particularly during disturbances and recoveries. Failure to maintain frequency can disrupt the operation of equipment and initiate disconnection of power plant equipment to prevent it from being damaged, which could lead to wide-spread blackouts.” Frequency Response Tool automates the power system frequency response analysis process. The tool performs initial estimation of the system frequency parameters (initial frequency, minimum frequency, settling point). User can visually inspect and adjust these parameters. The tool also calculates the frequency response performance metrics of the system, archives the historic events and baselines the system performance. Frequency response performance characteristics of the system are calculated using phasor measurement unit (PMU) information. Methodology of the frequency response performance assessment implemented in the tool complies with the NERC Frequency response standard.

  16. Tools of the Trade

    ERIC Educational Resources Information Center

    Porterfield, Kitty; Carnes, Meg

    2010-01-01

    People have known principals who are intellectual giants on issues of instruction and who have a great love of children but who stumble in leadership roles because they either do not or cannot communicate what they know. Good communication skills are among the most important tools a leader carries in his or her toolbox. Not only does good…

  17. Tools in HRD. Symposium.

    ERIC Educational Resources Information Center

    2002

    This document contains three papers from a symposium on tools in human resource development (HRD). "Game Theory Methodology in HRD" (Thomas J. Chermack, Richard A. Swanson) explores the utility of game theory in helping the HRD profession address the complexity of integrating multiple theories for disciplinary understanding and fulfilling its…

  18. Resource Assessment and Tools

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Various resource assessment strategies and tools are needed to ensure bioenergy feedstock materials are produced, harvested, and transported in a sustainable manner. This presentation highlights research accomplishments by the USDA-ARS Renewable Energy Assessment Project (REAP) team along with our u...

  19. Photutils: Photometry tools

    NASA Astrophysics Data System (ADS)

    Bradley, Larry; Sipocz, Brigitta; Robitaille, Thomas; Tollerud, Erik; Deil, Christoph; Vinícius, Zè; Barbary, Kyle; Günther, Hans Moritz; Bostroem, Azalee; Droettboom, Michael; Bray, Erik; Bratholm, Lars Andersen; Pickering, T. E.; Craig, Matt; Pascual, Sergio; Greco, Johnny; Donath, Axel; Kerzendorf, Wolfgang; Littlefair, Stuart; Barentsen, Geert; D'Eugenio, Francesco; Weaver, Benjamin Alan

    2016-09-01

    Photutils provides tools for detecting and performing photometry of astronomical sources. It can estimate the background and background rms in astronomical images, detect sources in astronomical images, estimate morphological parameters of those sources (e.g., centroid and shape parameters), and perform aperture and PSF photometry. Written in Python, it is an affiliated package of Astropy (ascl:1304.002).

  20. Measurement and Research Tools.

    ERIC Educational Resources Information Center

    1997

    This document contains four papers from a symposium on measurement and research tools for human resource development (HRD). "The 'Best Fit' Training: Measure Employee Learning Style Strengths" (Daniel L. Parry) discusses a study of the physiological aspect of sensory intake known as modality, more specifically, modality as measured by the…

  1. Tools for Authentication

    SciTech Connect

    White, G

    2008-07-09

    Many recent Non-proliferation and Arms Control software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool must be based on a complete language compiler infrastructure, that is, one that can parse and digest the full language through its standard grammar. ROSE is precisely such a compiler infrastructure developed within DOE. ROSE is a robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. This year, it has been extended to support the automated analysis of binaries. We continue to extend ROSE to address a number of security-specific requirements and apply it to software authentication for Non-proliferation and Arms Control projects. We will give an update on the status of our work.

  2. Hopper File Management Tool

    SciTech Connect

    Long, J W; O'Neill, N J; Smith, N G; Springmeyer, R R; Remmele, S; Richards, D A; Southon, J

    2004-11-15

    Hopper is a powerful interactive tool that allows users to transfer and manipulate files and directories by means of a graphical user interface. Users can connect to and manage resources using the major file transfer protocols. Implemented in Java, Hopper can be run almost anywhere: from an individual's desktop machine to large production machines. In a high-performance computing environment, managing files can become a difficult and time-consuming task that distracts from scientific work. Users must deal with multiple file transfer protocols, transferring enormous amounts of files between computer platforms, repeated authentication, organizing massive amounts of data, and other detailed but necessary tasks. This is often accomplished with a set of several different tools, each with its own interface and idiosyncrasies. Our goal is to develop tools for a more automated approach to file management that substantially improves users' ability to transfer, organize, search, and operate on collections of files. This paper describes the Hopper tool for advanced file management, including the software architecture, the functionality, and the user interface.

  3. New Tools for Design

    ERIC Educational Resources Information Center

    Halliburton, Cal; Roza, Victoria

    2006-01-01

    Technology educators are constantly in search of new tools and methods to enhance the education of their students. This article is an excerpt from a longer article published in "The Technology Teacher" that introduced the technology education community to a research- and knowledge-based methodology for design--invention and innovation. This…

  4. Electrically powered hand tool

    DOEpatents

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  5. Frequency Response Tool

    2014-03-13

    According to the North American Electric Reliability Corporation (NERC) definition: “Frequency response is a measure of an Interconnection’s ability to stabilize frequency immediately following the sudden loss of generation or load, and is a critical component of the reliable operation of the Bulk-Power System, particularly during disturbances and recoveries. Failure to maintain frequency can disrupt the operation of equipment and initiate disconnection of power plant equipment to prevent it from being damaged, which could leadmore » to wide-spread blackouts.” Frequency Response Tool automates the power system frequency response analysis process. The tool performs initial estimation of the system frequency parameters (initial frequency, minimum frequency, settling point). User can visually inspect and adjust these parameters. The tool also calculates the frequency response performance metrics of the system, archives the historic events and baselines the system performance. Frequency response performance characteristics of the system are calculated using phasor measurement unit (PMU) information. Methodology of the frequency response performance assessment implemented in the tool complies with the NERC Frequency response standard.« less

  6. Healthy Homes Tools

    ERIC Educational Resources Information Center

    Peek, Gina; Lyon, Melinda; Russ, Randall

    2012-01-01

    Extension is focusing on healthy homes programming. Extension educators are not qualified to diagnose consumers' medical problems as they relate to housing. We cannot give medical advice. Instead, we can help educate consumers about home conditions that may affect their well-being. Extension educators need appropriate healthy homes tools to…

  7. The science writing tool

    NASA Astrophysics Data System (ADS)

    Schuhart, Arthur L.

    This is a two-part dissertation. The primary part is the text of a science-based composition rhetoric and reader called The Science Writing Tool. This textbook has seven chapters dealing with topics in Science Rhetoric. Each chapter includes a variety of examples of science writing, discussion questions, writing assignments, and instructional resources. The purpose of this text is to introduce lower-division college science majors to the role that rhetoric and communication plays in the conduct of Science, and how these skills contribute to a successful career in Science. The text is designed as a "tool kit," for use by an instructor constructing a science-based composition course or a writing-intensive Science course. The second part of this part of this dissertation reports on student reactions to draft portions of The Science Writing Tool text. In this report, students of English Composition II at Northern Virginia Community College-Annandale were surveyed about their attitudes toward course materials and topics included. The findings were used to revise and expand The Science Writing Tool.

  8. Extended Testability Analysis Tool

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin; Maul, William A.; Fulton, Christopher

    2012-01-01

    The Extended Testability Analysis (ETA) Tool is a software application that supports fault management (FM) by performing testability analyses on the fault propagation model of a given system. Fault management includes the prevention of faults through robust design margins and quality assurance methods, or the mitigation of system failures. Fault management requires an understanding of the system design and operation, potential failure mechanisms within the system, and the propagation of those potential failures through the system. The purpose of the ETA Tool software is to process the testability analysis results from a commercial software program called TEAMS Designer in order to provide a detailed set of diagnostic assessment reports. The ETA Tool is a command-line process with several user-selectable report output options. The ETA Tool also extends the COTS testability analysis and enables variation studies with sensor sensitivity impacts on system diagnostics and component isolation using a single testability output. The ETA Tool can also provide extended analyses from a single set of testability output files. The following analysis reports are available to the user: (1) the Detectability Report provides a breakdown of how each tested failure mode was detected, (2) the Test Utilization Report identifies all the failure modes that each test detects, (3) the Failure Mode Isolation Report demonstrates the system s ability to discriminate between failure modes, (4) the Component Isolation Report demonstrates the system s ability to discriminate between failure modes relative to the components containing the failure modes, (5) the Sensor Sensor Sensitivity Analysis Report shows the diagnostic impact due to loss of sensor information, and (6) the Effect Mapping Report identifies failure modes that result in specified system-level effects.

  9. Risk Management Implementation Tool

    NASA Technical Reports Server (NTRS)

    Wright, Shayla L.

    2004-01-01

    Continuous Risk Management (CM) is a software engineering practice with processes, methods, and tools for managing risk in a project. It provides a controlled environment for practical decision making, in order to assess continually what could go wrong, determine which risk are important to deal with, implement strategies to deal with those risk and assure the measure effectiveness of the implemented strategies. Continuous Risk Management provides many training workshops and courses to teach the staff how to implement risk management to their various experiments and projects. The steps of the CRM process are identification, analysis, planning, tracking, and control. These steps and the various methods and tools that go along with them, identification, and dealing with risk is clear-cut. The office that I worked in was the Risk Management Office (RMO). The RMO at NASA works hard to uphold NASA s mission of exploration and advancement of scientific knowledge and technology by defining and reducing program risk. The RMO is one of the divisions that fall under the Safety and Assurance Directorate (SAAD). I worked under Cynthia Calhoun, Flight Software Systems Engineer. My task was to develop a help screen for the Continuous Risk Management Implementation Tool (RMIT). The Risk Management Implementation Tool will be used by many NASA managers to identify, analyze, track, control, and communicate risks in their programs and projects. The RMIT will provide a means for NASA to continuously assess risks. The goals and purposes for this tool is to provide a simple means to manage risks, be used by program and project managers throughout NASA for managing risk, and to take an aggressive approach to advertise and advocate the use of RMIT at each NASA center.

  10. Web Tools: The Second Generation

    ERIC Educational Resources Information Center

    Pascopella, Angela

    2008-01-01

    Web 2.0 tools and technologies, or second generation tools, help districts to save time and money, and eliminate the need to transfer or move files back and forth across computers. Many Web 2.0 tools help students think critically and solve problems, which falls under the 21st-century skills. The second-generation tools are growing in popularity…

  11. Tool use by aquatic animals

    PubMed Central

    Mann, Janet; Patterson, Eric M.

    2013-01-01

    Tool-use research has focused primarily on land-based animals, with less consideration given to aquatic animals and the environmental challenges and conditions they face. Here, we review aquatic tool use and examine the contributing ecological, physiological, cognitive and social factors. Tool use among aquatic animals is rare but taxonomically diverse, occurring in fish, cephalopods, mammals, crabs, urchins and possibly gastropods. While additional research is required, the scarcity of tool use can likely be attributable to the characteristics of aquatic habitats, which are generally not conducive to tool use. Nonetheless, studying tool use by aquatic animals provides insights into the conditions that promote and inhibit tool-use behaviour across biomes. Like land-based tool users, aquatic animals tend to find tools on the substrate and use tools during foraging. However, unlike on land, tool users in water often use other animals (and their products) and water itself as a tool. Among sea otters and dolphins, the two aquatic tool users studied in greatest detail, some individuals specialize in tool use, which is vertically socially transmitted possibly because of their long dependency periods. In all, the contrasts between aquatic- and land-based tool users enlighten our understanding of the adaptive value of tool-use behaviour. PMID:24101631

  12. Retaining-Ring Installation Tool

    NASA Technical Reports Server (NTRS)

    Christian, S.

    1983-01-01

    New tool eliminates damage to ring through improper tool use. Tool installs spiral-wound retaining rings quickly, reliably, and safely. Tool inserts rings in splined or irregularly shaped bores, bores at bottom of deep ring and slides it along bore until it nests in groove. Pistons are moved by variety of linkages.

  13. A System Analysis Tool

    SciTech Connect

    CAMPBELL,PHILIP L.; ESPINOZA,JUAN

    2000-06-01

    In this paper we describe a tool for analyzing systems. The analysis is based on program slicing. It answers the following question for the software: if the value of a particular variable changes, what other variable values also change, and what is the path in between? program slicing was developed based on intra-procedure control and data flow. It has been expanded commercially to inter-procedure flow. However, we extend slicing to collections of programs and non-program entities, which we term multi-domain systems. The value of our tool is that an analyst can model the entirety of a system, not just the software, and we believe that this makes for a significant increase in power. We are building a prototype system.

  14. Stack Trace Analysis Tool

    SciTech Connect

    2013-02-19

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallell application. STAT uses the MRNet tree based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to from a single call prefix tree. The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence slasses. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.

  15. Stack Trace Analysis Tool

    2013-02-19

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallell application. STAT uses the MRNet tree based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to from a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence slasses. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  16. Stack Trace Analysis Tool

    2008-01-16

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallel application. STAT uses the MRNet free based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to form a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence classes. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  17. Tool for Movable Ceiling

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The Bendix Corp., with the help of NASA's Kennedy Space Center, developed a tool to equalize tensions in the 150 cables of the ceiling. This inexpensive tool used in concert halls was developed first for elevator and crane cables used to lift heavy space vehicles. University of Akron's performing arts hall has been developed to shrink and expand to accommodate audiences as large as 3,000 and as small as 900. Once the hall has been sound tuned, various positions of this ingenious ceiling and related acoustic curtains may be called into play immediately by pushing buttons on a control console programmed previously. With the touch of a finger before an event, a technician may condition the hall for chamber music, symphony, or theater.

  18. EDCATS: An Evaluation Tool

    NASA Technical Reports Server (NTRS)

    Heard, Pamala D.

    1998-01-01

    The purpose of this research is to explore the development of Marshall Space Flight Center Unique Programs. These academic tools provide the Education Program Office with important information from the Education Computer Aided Tracking System (EDCATS). This system is equipped to provide on-line data entry, evaluation, analysis, and report generation, with full archiving for all phases of the evaluation process. Another purpose is to develop reports and data that is tailored to Marshall Space Flight Center Unique Programs. It also attempts to acquire knowledge on how, why, and where information is derived. As a result, a user will be better prepared to decide which available tool is the most feasible for their reports.

  19. Fluid blade disablement tool

    SciTech Connect

    Jakaboski, Juan-Carlos; Hughs, Chance G.; Todd, Steven N.

    2012-01-10

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  20. Algal functional annotation tool

    SciTech Connect

    Lopez, D.; Casero, D.; Cokus, S. J.; Merchant, S. S.; Pellegrini, M.

    2012-07-01

    The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG pathway maps and batch gene identifier conversion.

  1. Load Model Data Tool

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to bemore » provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.« less

  2. Load Model Data Tool

    SciTech Connect

    David Chassin, Pavel Etingov

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to be provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.

  3. Automated Standard Hazard Tool

    NASA Technical Reports Server (NTRS)

    Stebler, Shane

    2014-01-01

    The current system used to generate standard hazard reports is considered cumbersome and iterative. This study defines a structure for this system's process in a clear, algorithmic way so that standard hazard reports and basic hazard analysis may be completed using a centralized, web-based computer application. To accomplish this task, a test server is used to host a prototype of the tool during development. The prototype is configured to easily integrate into NASA's current server systems with minimal alteration. Additionally, the tool is easily updated and provides NASA with a system that may grow to accommodate future requirements and possibly, different applications. Results of this project's success are outlined in positive, subjective reviews complete by payload providers and NASA Safety and Mission Assurance personnel. Ideally, this prototype will increase interest in the concept of standard hazard automation and lead to the full-scale production of a user-ready application.

  4. Avionics System Architecture Tool

    NASA Technical Reports Server (NTRS)

    Chau, Savio; Hall, Ronald; Traylor, marcus; Whitfield, Adrian

    2005-01-01

    Avionics System Architecture Tool (ASAT) is a computer program intended for use during the avionics-system-architecture- design phase of the process of designing a spacecraft for a specific mission. ASAT enables simulation of the dynamics of the command-and-data-handling functions of the spacecraft avionics in the scenarios in which the spacecraft is expected to operate. ASAT is built upon I-Logix Statemate MAGNUM, providing a complement of dynamic system modeling tools, including a graphical user interface (GUI), modeling checking capabilities, and a simulation engine. ASAT augments this with a library of predefined avionics components and additional software to support building and analyzing avionics hardware architectures using these components.

  5. Log-Tool

    2012-05-21

    Log files are typically semi- or un-structured. To be useable for visualization and machine learning, they need to be parsed into a standard, structured format. Log-tool is a tool for facilitating the parsing, structuring, and routing of log files (e.g. intrusion detection long, web server logs, system logs). It consists of three main components: (1) Input – it will input data from files, standard input, and syslog, (2) Parser – it will parse the logmore » file based on regular expressions into structured data (JSNO format), (3) Output – it will output structured data into commonly used formats, including Redis (a database), standard output, and syslog.« less

  6. Pneumatic soil removal tool

    DOEpatents

    Neuhaus, J.E.

    1992-10-13

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

  7. Pneumatic soil removal tool

    DOEpatents

    Neuhaus, John E.

    1992-01-01

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

  8. Stack Trace Analysis Tool

    SciTech Connect

    2008-01-16

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallel application. STAT uses the MRNet free based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to form a single call prefix tree. The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence classes. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.

  9. Building energy analysis tool

    DOEpatents

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  10. Remote vehicle survey tool

    SciTech Connect

    Armstrong, G.A.; Burks, B.L.; Kress, R.L.; Wagner, D.G.; Ward, C.R.

    1993-05-01

    The Remote Vehicle Survey Tool (RVS7) is a color graphical display tool for viewing remotely acquired scientific data. The RVST displays the data in the form of a color two-dimensional world model map. The world model map allows movement of the remote vehicle to be tracked by the operator and the data from sensors to be graphically depicted in the interface. Linear and logarithmic meters, dual channel oscilloscopes, and directional compasses are used to display sensor information. The RVST is user-configurable by the use of ASCII text files. The operator can configure the RVST to work with any remote data acquisition system and teleoperated or autonomous vehicle. The modular design of the RVST and its ability to be quickly configured for varying system requirements make the RVST ideal for remote scientific data display in all environmental restoration and waste management programs.

  11. Remote vehicle survey tool

    SciTech Connect

    Armstrong, G.A.; Burks, B.L.; Kress, R.L. ); Wagner, D.G.; Ward, C.R. )

    1993-01-01

    The Remote Vehicle Survey Tool (RVS7) is a color graphical display tool for viewing remotely acquired scientific data. The RVST displays the data in the form of a color two-dimensional world model map. The world model map allows movement of the remote vehicle to be tracked by the operator and the data from sensors to be graphically depicted in the interface. Linear and logarithmic meters, dual channel oscilloscopes, and directional compasses are used to display sensor information. The RVST is user-configurable by the use of ASCII text files. The operator can configure the RVST to work with any remote data acquisition system and teleoperated or autonomous vehicle. The modular design of the RVST and its ability to be quickly configured for varying system requirements make the RVST ideal for remote scientific data display in all environmental restoration and waste management programs.

  12. FASTBUS simulation tools

    SciTech Connect

    Dean, T.D. ); Haney, M.J. )

    1992-08-01

    In this paper a generalized model of a FASTBUS master is presented. The model is used with simulation tools to aid in the specification, design, and production of FASTBUS slave modules. The model provides a mechanism to interact with the electrical schematics and software models to predict performance. The model is written in the IEEE std 1076-1987 hardware description language VHDL. A model of the ATC logic is also presented. VHDL was chosen to provide portability to various platforms and simulation tools. The models, in conjunction with most commercially available simulators, will perform all of the transactions specified in IEEE std 960-1989. The models may be used to study the behavior of electrical schematics and other software models and detect violations of the FASTBUS protocol. For example, a hardware design of a slave module could be studied, protocol violations detected and corrected before committing money to prototype development.

  13. REMOTE RETRIEVING TOOL

    DOEpatents

    Fromm, L.W. Jr.

    1958-08-19

    A retrieving tool is described to securely grasp an object for emplacement in, or withdrawal from, an elongated tube. The object is grasped by hooks actuated by a wedge and cann mechanism. The mechanism on the end of a long rodlike structure is controlled by levers or bars at the access end of the tube. This device is particularly useful for positioning fuel elements within a reactor core.

  14. Java Vertexing Tools

    SciTech Connect

    Strube, Jan; Graf, Norman; /SLAC

    2006-03-03

    This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

  15. Tools for the trade

    NASA Technical Reports Server (NTRS)

    Gillman, Wallace M.

    1990-01-01

    A brief review is given of daily operations in the airline business, with emphasis on the decisions made by pilots and the information used to make those decisions. Various wind shears are discussed as they affect daily operations. The discussion of tools focuses on airborne reactive and predictive systems. The escape maneuver used to fly out of a severe windshear is from a pilot's point of view.

  16. Channel nut tool

    DOEpatents

    Olson, Marvin

    2016-01-12

    A method, system, and apparatus for installing channel nuts includes a shank, a handle formed on a first end of a shank, and an end piece with a threaded shaft configured to receive a channel nut formed on the second end of the shaft. The tool can be used to insert or remove a channel nut in a channel framing system and then removed from the channel nut.

  17. Graphical Contingency Analysis Tool

    SciTech Connect

    2010-03-02

    GCA is a visual analytic tool for power grid contingency analysis to provide more decision support for power grid operations. GCA allows power grid operators to quickly gain situational awareness of power grid by converting large amounts of operational data to graphic domain with a color contoured map; identify system trend and foresee and discern emergencies by performing trending analysis; identify the relationships between system configurations and affected assets by conducting clustering analysis; and identify the best action by interactively evaluate candidate actions.

  18. Program Management Tool

    NASA Technical Reports Server (NTRS)

    Gawadiak, Yuri; Wong, Alan; Maluf, David; Bell, David; Gurram, Mohana; Tran, Khai Peter; Hsu, Jennifer; Yagi, Kenji; Patel, Hemil

    2007-01-01

    The Program Management Tool (PMT) is a comprehensive, Web-enabled business intelligence software tool for assisting program and project managers within NASA enterprises in gathering, comprehending, and disseminating information on the progress of their programs and projects. The PMT provides planning and management support for implementing NASA programmatic and project management processes and requirements. It provides an online environment for program and line management to develop, communicate, and manage their programs, projects, and tasks in a comprehensive tool suite. The information managed by use of the PMT can include monthly reports as well as data on goals, deliverables, milestones, business processes, personnel, task plans, monthly reports, and budgetary allocations. The PMT provides an intuitive and enhanced Web interface to automate the tedious process of gathering and sharing monthly progress reports, task plans, financial data, and other information on project resources based on technical, schedule, budget, and management criteria and merits. The PMT is consistent with the latest Web standards and software practices, including the use of Extensible Markup Language (XML) for exchanging data and the WebDAV (Web Distributed Authoring and Versioning) protocol for collaborative management of documents. The PMT provides graphical displays of resource allocations in the form of bar and pie charts using Microsoft Excel Visual Basic for Application (VBA) libraries. The PMT has an extensible architecture that enables integration of PMT with other strategic-information software systems, including, for example, the Erasmus reporting system, now part of the NASA Integrated Enterprise Management Program (IEMP) tool suite, at NASA Marshall Space Flight Center (MSFC). The PMT data architecture provides automated and extensive software interfaces and reports to various strategic information systems to eliminate duplicative human entries and minimize data integrity

  19. Friction Stir Weld Tools

    NASA Technical Reports Server (NTRS)

    Carter, Robert W. (Inventor); Payton, Lewis N. (Inventor)

    2007-01-01

    A friction stir weld tool sleeve is supported by an underlying support pin. The pin material is preferably selected for toughness and fracture characteristics. The pin sleeve preferably has a geometry which employs the use of an interrupted thread, a plurality of flutes and/or eccentric path to provide greater flow through. Paddles have been found to assist in imparting friction and directing plastic metal during the welding process.

  20. Friction stir weld tools

    NASA Technical Reports Server (NTRS)

    Carter, Robert W. (Inventor); Payton, Lewis N. (Inventor)

    2007-01-01

    A friction stir weld tool sleeve is supported by an underlying support pin. The pin material is preferably selected for toughness and fracture characteristics. The pin sleeve preferably has a geometry which employs the use of an interrupted thread, a plurality of flutes and/or eccentric path to provide greater flow through. Paddles have been found to assist in imparting friction and directing plastic metal during the welding process.

  1. Sierra Nevada Tools

    2004-01-01

    SNTools is a general framework for managing, through the use of policies, development tools used to create software. To date, most implementations written under the framework focus on managing revision control, building and testing. The Sierra implementation of the SNTools is used in the development and installation of the SIERRA Framework and its applications, SNTools is used as a method of managing or codifying software quality engineering practices.

  2. Environmental Compliance Assistance Tool

    1999-04-16

    ENVIROCAT is a database/knowledge base software system designed to assist in environment, safety and health (ES&H) regulatory compliance assessments of manufacturing processes. Materials and processes are mapped to ES&H regulations. The regulations database identifies materials'' quantities and limits of compliance. Materials are identified per descriptive name or CAS number. ENVIROCAT has an interactive user/tool capability such that a question and answer session on materials and processes is custom tailored to a particular manufacturing site.

  3. Sasquatch Footprint Tool

    NASA Technical Reports Server (NTRS)

    Bledsoe, Kristin

    2013-01-01

    The Crew Exploration Vehicle Parachute Assembly System (CPAS) is the parachute system for NASA s Orion spacecraft. The test program consists of numerous drop tests, wherein a test article rigged with parachutes is extracted or released from an aircraft. During such tests, range safety is paramount, as is the recoverability of the parachutes and test article. It is crucial to establish an aircraft release point that will ensure that the article and all items released from it will land in safe locations. A new footprint predictor tool, called Sasquatch, was created in MATLAB. This tool takes in a simulated trajectory for the test article, information about all released objects, and atmospheric wind data (simulated or actual) to calculate the trajectories of the released objects. Dispersions are applied to the landing locations of those objects, taking into account the variability of winds, aircraft release point, and object descent rate. Sasquatch establishes a payload release point (e.g., where the payload will be extracted from the carrier aircraft) that will ensure that the payload and all objects released from it will land in a specified cleared area. The landing locations (the final points in the trajectories) are plotted on a map of the test range. Sasquatch was originally designed for CPAS drop tests and includes extensive information about both the CPAS hardware and the primary test range used for CPAS testing. However, it can easily be adapted for more complex CPAS drop tests, other NASA projects, and commercial partners. CPAS has developed the Sasquatch footprint tool to ensure range safety during parachute drop tests. Sasquatch is well correlated to test data and continues to ensure the safety of test personnel as well as the safe recovery of all equipment. The tool will continue to be modified based on new test data, improving predictions and providing added capability to meet the requirements of more complex testing.

  4. Automatically-Programed Machine Tools

    NASA Technical Reports Server (NTRS)

    Purves, L.; Clerman, N.

    1985-01-01

    Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.

  5. Grid reliability management tools

    SciTech Connect

    Eto, J.; Martinez, C.; Dyer, J.; Budhraja, V.

    2000-10-01

    To summarize, Consortium for Electric Reliability Technology Solutions (CERTS) is engaged in a multi-year program of public interest R&D to develop and prototype software tools that will enhance system reliability during the transition to competitive markets. The core philosophy embedded in the design of these tools is the recognition that in the future reliability will be provided through market operations, not the decisions of central planners. Embracing this philosophy calls for tools that: (1) Recognize that the game has moved from modeling machine and engineering analysis to simulating markets to understand the impacts on reliability (and vice versa); (2) Provide real-time data and support information transparency toward enhancing the ability of operators and market participants to quickly grasp, analyze, and act effectively on information; (3) Allow operators, in particular, to measure, monitor, assess, and predict both system performance as well as the performance of market participants; and (4) Allow rapid incorporation of the latest sensing, data communication, computing, visualization, and algorithmic techniques and technologies.

  6. Damage assessment tool

    SciTech Connect

    Bailey, E.I.; Read, S.R.

    1993-01-01

    Once a leak in a subsea pipeline has been located, there are several methods available to deal with it. These range in cost and difficulty from relaying the line to installing a repair clamp over the leak. Installing the clamp is the quickest and least expensive method if the reliability of this fix is sufficient. However, there are no methods available today that provide for the investigation of the condition of the pipe below depths where divers operate. The objective of this project was to develop the requirements and possible configurations of a tool (system) which has the capability to inspect a limited region of a pipeline. This tool will provide detailed information regarding the pipeline geometry distortions and will define the limits and orientation of a crack in the pipe, or define the leaking defect. The tool will be deployed by a remotely operated vehicle (ROV). Several types of technology are available to choose from. These include magnetic particle inspection, eddy current inspection, ultrasonic inspection, photogrammetry, videogrammetry, ring gauging, and contact dimensional acquisition. The final instrument system will probably utilize two or more of these systems for proving up the condition of the pipe.

  7. GIDEP Batching Tool

    NASA Technical Reports Server (NTRS)

    Fong, Danny; Odell,Dorice; Barry, Peter; Abrahamian, Tomik

    2008-01-01

    This software provides internal, automated search mechanics of GIDEP (Government- Industry Data Exchange Program) Alert data imported from the GIDEP government Web site. The batching tool allows the import of a single parts list in tab-delimited text format into the local JPL GIDEP database. Delimiters from every part number are removed. The original part numbers with delimiters are compared, as well as the newly generated list without the delimiters. The two lists run against the GIDEP imports, and output any matches. This feature only works with Netscape 2.0 or greater, or Internet Explorer 4.0 or greater. The user selects the browser button to choose a text file to import. When the submit button is pressed, this script will import alerts from the text file into the local JPL GIDEP database. This batch tool provides complete in-house control over exported material and data for automated batch match abilities. The batching tool has the ability to match capabilities of the parts list to tables, and yields results that aid further research and analysis. This provides more control over GIDEP information for metrics and reports information not provided by the government site. This software yields results quickly and gives more control over external data from the government site in order to generate other reports not available from the external source. There is enough space to store years of data. The program relates to risk identification and management with regard to projects and GIDEP alert information encompassing flight parts for space exploration.

  8. Frequency Response Analysis Tool

    SciTech Connect

    Etingov, Pavel V.; Kosterev, Dmitry; Dai, T.

    2014-12-31

    Frequency response has received a lot of attention in recent years at the national level, which culminated in the development and approval of North American Electricity Reliability Corporation (NERC) BAL-003-1 Frequency Response and Frequency Bias Setting Reliability Standard. This report is prepared to describe the details of the work conducted by Pacific Northwest National Laboratory (PNNL) in collaboration with the Bonneville Power Administration and Western Electricity Coordinating Council (WECC) Joint Synchronized Information Subcommittee (JSIS) to develop a frequency response analysis tool (FRAT). The document provides the details on the methodology and main features of the FRAT. The tool manages the database of under-frequency events and calculates the frequency response baseline. Frequency response calculations are consistent with frequency response measure (FRM) in NERC BAL-003-1 for an interconnection and balancing authority. The FRAT can use both phasor measurement unit (PMU) data, where available, and supervisory control and data acquisition (SCADA) data. The tool is also capable of automatically generating NERC Frequency Response Survey (FRS) forms required by BAL-003-1 Standard.

  9. Fluid sampling tool

    DOEpatents

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    1999-05-25

    A fluid sampling tool for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall.

  10. Fluid sampling tool

    DOEpatents

    Garcia, A.R.; Johnston, R.G.; Martinez, R.K.

    1999-05-25

    A fluid sampling tool is described for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall. 6 figs.

  11. Algal functional annotation tool

    SciTech Connect

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations to interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG

  12. Algal functional annotation tool

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations tomore » interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on

  13. 12. Relationship of est tool shed, west tool shed, residence, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Relationship of est tool shed, west tool shed, residence, claim house, and chicken house to each other and immediate surroundings, looking southeast - George Spangerberger Farmstead, 2012 West Illinois Avenue, South Hutchinson, Reno County, KS

  14. APT: Aperture Photometry Tool

    NASA Astrophysics Data System (ADS)

    Laher, Russ

    2012-08-01

    Aperture Photometry Tool (APT) is software for astronomers and students interested in manually exploring the photometric qualities of astronomical images. It has a graphical user interface (GUI) which allows the image data associated with aperture photometry calculations for point and extended sources to be visualized and, therefore, more effectively analyzed. Mouse-clicking on a source in the displayed image draws a circular or elliptical aperture and sky annulus around the source and computes the source intensity and its uncertainty, along with several commonly used measures of the local sky background and its variability. The results are displayed and can be optionally saved to an aperture-photometry-table file and plotted on graphs in various ways using functions available in the software. APT is geared toward processing sources in a small number of images and is not suitable for bulk processing a large number of images, unlike other aperture photometry packages (e.g., SExtractor). However, APT does have a convenient source-list tool that enables calculations for a large number of detections in a given image. The source-list tool can be run either in automatic mode to generate an aperture photometry table quickly or in manual mode to permit inspection and adjustment of the calculation for each individual detection. APT displays a variety of useful graphs, including image histogram, and aperture slices, source scatter plot, sky scatter plot, sky histogram, radial profile, curve of growth, and aperture-photometry-table scatter plots and histograms. APT has functions for customizing calculations, including outlier rejection, pixel “picking” and “zapping,” and a selection of source and sky models. The radial-profile-interpolation source model, accessed via the radial-profile-plot panel, allows recovery of source intensity from pixels with missing data and can be especially beneficial in crowded fields.

  15. Water Powered Tools

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Space Spin-Offs, Inc. under a contract with Lewis Research Center and Marshall Space Flight Center produced a new water-powered saw that cuts through concrete and steel plate reducing danger of explosion or electric shock in rescue and other operations. In prototype unit efficient water-powered turbine drives an 8 inch diameter grinding disk at 6,600 rpm. Exhaust water cools disk and workpiece quenching any sparks produced by cutting head. At maximum power, tool easily cuts through quarter inch steel plate. Adapter heads for chain saws, impact wrenches, heavy duty drills, and power hack saws can be fitted.

  16. Cyber Security Evaluation Tool

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization’s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied tomore » enhance cybersecurity controls.« less

  17. Jupiter Environment Tool

    NASA Technical Reports Server (NTRS)

    Sturm, Erick J.; Monahue, Kenneth M.; Biehl, James P.; Kokorowski, Michael; Ngalande, Cedrick,; Boedeker, Jordan

    2012-01-01

    The Jupiter Environment Tool (JET) is a custom UI plug-in for STK that provides an interface to Jupiter environment models for visualization and analysis. Users can visualize the different magnetic field models of Jupiter through various rendering methods, which are fully integrated within STK s 3D Window. This allows users to take snapshots and make animations of their scenarios with magnetic field visualizations. Analytical data can be accessed in the form of custom vectors. Given these custom vectors, users have access to magnetic field data in custom reports, graphs, access constraints, coverage analysis, and anywhere else vectors are used within STK.

  18. Contamination Analysis Tools

    NASA Technical Reports Server (NTRS)

    Brieda, Lubos

    2015-01-01

    This talk presents 3 different tools developed recently for contamination analysis:HTML QCM analyzer: runs in a web browser, and allows for data analysis of QCM log filesJava RGA extractor: can load in multiple SRS.ana files and extract pressure vs. time dataC++ Contamination Simulation code: 3D particle tracing code for modeling transport of dust particulates and molecules. Uses residence time to determine if molecules stick. Particulates can be sampled from IEST-STD-1246 and be accelerated by aerodynamic forces.

  19. Outyear Budgeting Tool

    SciTech Connect

    Carlos Castillo, Jerel Nelson

    2010-12-31

    OBTool performs the following: • Consistent method and tool to develop/estimate fiscal year (FY) 2010 and outyear budget/estimates • Maintain configuration control on resource rates and changes to outyear budget estimates, while allowing for accessibility, accountability, and tracking shared access between program managers, facility managers (FMs), project managers (PMs), cost account managers (CAMs), and project controls engineers (PCEs) • Consistency in budget estimating methodology, including scope, requirements, basis of estimates, resources, activities, escalation, and presentation of documentation in tasks and execution plans and reports • Ability to sync (i.e. export) and import data into Primavera and Cobra to the lifecycle baseline file

  20. Graphical Contingency Analysis Tool

    2010-03-02

    GCA is a visual analytic tool for power grid contingency analysis to provide more decision support for power grid operations. GCA allows power grid operators to quickly gain situational awareness of power grid by converting large amounts of operational data to graphic domain with a color contoured map; identify system trend and foresee and discern emergencies by performing trending analysis; identify the relationships between system configurations and affected assets by conducting clustering analysis; and identifymore » the best action by interactively evaluate candidate actions.« less

  1. Groove refinishing tool

    DOEpatents

    Kellogg, Harvey J.; Holm, Robert O.

    1983-01-01

    A groove refinishing tool which utilizes a finishing wheel which is controlled by an air grinder motor. The air grinder motor is mounted on a main body section which is pivotally attached to a shoe element. The shoe element contains guide pins which guide the shoe element on the groove to be refinished. Application of pressure on the main body element compresses a weight counterbalance spring to extend the finishing wheel through the shoe element to refinish the groove surface. A window is provided for viewing the refinishing operation. Milling operations can also be performed by replacing the finishing wheel with a milling wheel.

  2. Cyber Security Evaluation Tool

    SciTech Connect

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization’s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied to enhance cybersecurity controls.

  3. 17. NBS TOOL ROOM. MISCELLANEOUS TOOLS USED DURING EXTRA VEHICULAR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. NBS TOOL ROOM. MISCELLANEOUS TOOLS USED DURING EXTRA VEHICULAR ACTIVITY (EVA) MISSIONS AND NBS TRAINING. FROM LEFT TO RIGHT THE TOOLS ARE: SHUTTLE TRANSPORTATION SYSTEM (STS) PORTABLE FOOT RESTRAINT (PFR), ESSEX WRENCH, SOCKET WRENCH, SAFETY TETHER REEL (LEFT REAR), MINI WORKSTATION (CENTER REAR), TETHERS (FRONT CENTER), HUBBLE SPACE TELESCOPE (HST) POWER TOOL (FRONT RIGHT), HUBBLE SPACE TELESCOPE & PORTABLE FOOT RESTRAINT (REAR RIGHT). - Marshall Space Flight Center, Neutral Buoyancy Simulator Facility, Rideout Road, Huntsville, Madison County, AL

  4. Embodied Rules in Tool Use: A Tool-Switching Study

    ERIC Educational Resources Information Center

    Beisert, Miriam; Massen, Cristina; Prinz, Wolfgang

    2010-01-01

    In tool use, a transformation rule defines the relation between an operating movement and its distal effect. This rule is determined by the tool structure and requires no explicit definition. The present study investigates how humans represent and apply compatible and incompatible transformation rules in tool use. In Experiment 1, participants had…

  5. Geometric reasoning about assembly tools

    SciTech Connect

    Wilson, R.H.

    1997-01-01

    Planning for assembly requires reasoning about various tools used by humans, robots, or other automation to manipulate, attach, and test parts and subassemblies. This paper presents a general framework to represent and reason about geometric accessibility issues for a wide variety of such assembly tools. Central to the framework is a use volume encoding a minimum space that must be free in an assembly state to apply a given tool, and placement constraints on where that volume must be placed relative to the parts on which the tool acts. Determining whether a tool can be applied in a given assembly state is then reduced to an instance of the FINDPLACE problem. In addition, the author presents more efficient methods to integrate the framework into assembly planning. For tools that are applied either before or after their target parts are mated, one method pre-processes a single tool application for all possible states of assembly of a product in polynomial time, reducing all later state-tool queries to evaluations of a simple expression. For tools applied after their target parts are mated, a complementary method guarantees polynomial-time assembly planning. The author presents a wide variety of tools that can be described adequately using the approach, and surveys tool catalogs to determine coverage of standard tools. Finally, the author describes an implementation of the approach in an assembly planning system and experiments with a library of over one hundred manual and robotic tools and several complex assemblies.

  6. Butt Joint Tool Commissioning

    SciTech Connect

    Martovetsky, N N

    2007-12-06

    ITER Central Solenoid uses butt joints for connecting the pancakes in the CS module. The principles of the butt joining of the CICC were developed by the JAPT during CSMC project. The difference between the CSMC butt joint and the CS butt joint is that the CS butt joint is an in-line joint, while the CSMC is a double joint through a hairpin jumper. The CS butt joint has to carry the hoop load. The straight length of the joint is only 320 mm, and the vacuum chamber around the joint has to have a split in the clamp shell. These requirements are challenging. Fig.1 presents a CSMC joint, and Fig.2 shows a CS butt joint. The butt joint procedure was verified and demonstrated. The tool is capable of achieving all specified parameters. The vacuum in the end was a little higher than the target, which is not critical and readily correctable. We consider, tentatively that the procedure is established. Unexpectedly, we discover significant temperature nonuniformity in the joint cross section, which is not formally a violation of the specs, but is a point of concern. All testing parameters are recorded for QA purposes. We plan to modify the butt joining tool to improve its convenience of operation and provide all features necessary for production of butt joints by qualified personnel.

  7. Treatment Deployment Evaluation Tool

    SciTech Connect

    Rynearson, Michael Ardel; Plum, Martin Michael

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE -owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that the treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  8. Treatment Deployment Evaluation Tool

    SciTech Connect

    M. A. Rynearson; M. M. Plum

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE-owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that a treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  9. FASTBUS simulation tools

    SciTech Connect

    Dean, T.D. ); Haney, M.J. )

    1991-10-01

    A generalized model of a FASTBUS master is presented. The model is used with simulation tools to aid in the specification, design, and production of FASTBUS slave modules. The model provides a mechanism to interact with the electrical schematics and software models to predict performance. The model is written in the IEEE std 1076-1987 hardware description language VHDL. A model of the ATC logic is also presented. VHDL was chosen to provide portability to various platforms and simulation tools. The models, in conjunction with most commercially available simulators, will perform all of the transactions specified in IEEE std 960-1989. The models may be used to study the behavior of electrical schematics and other software models and detect violations of the FASTBUS protocol. For example, a hardware design of a slave module could be studied, protocol violations detected and corrected before committing money to prototype development. The master model accepts a stream of high level commands from an ASCII file to initiate FASTBUS transactions. The high level command language is based on the FASTBUS standard routines listed in IEEE std 1177-1989. Using this standard-based command language to direct the model of the master, hardware engineers can simulate FASTBUS transactions in the language used by physicists and programmers to operate FASTBUS systems. 15 refs., 6 figs.

  10. Guided earth boring tool

    SciTech Connect

    Mc Donald, W.J.; Pittard, G.T.; Maurer, W.C.; Wasson, M.R.; Herben, W.C.

    1987-09-22

    A controllable tool for drilling holes in the earth is described comprising a hollow elongated rigid supporting drill pipe having a forward end for entering the earth, means supporting the drill pipe for earth boring or piercing movement, including means for moving the drill pipe longitudinally for penetrating the earth, the drill pipe moving means being constructed to permit addition and removal of supporting drill pipe during earth penetrating operation, a boring mole supported on the forward end of the hollow low drill pipe comprising a cylindrical housing supported on and open to the forward end of the drill pipe, a first means on the front end for applying a boring force to the soil comprising an anvil having a striking surface inside the housing and a boring surface outside the housing, a second means comprising a reciprocally movable hammer positioned in the housing to apply a percussive force to the anvil striking surface for transmitting a percussive force to the boring force applying means, and means permitting introduction of air pressure supplied through the hollow pipe into the housing for operating the hammer and for discharging spent air from the housing to the hole being bored, and the tool being operable to penetrate the earth upon longitudinal movement of the drill rod by the longitudinal rod moving means and operation of the mole by reciprocal movement of the hammer.

  11. Phenological Parameters Estimation Tool

    NASA Technical Reports Server (NTRS)

    McKellip, Rodney D.; Ross, Kenton W.; Spruce, Joseph P.; Smoot, James C.; Ryan, Robert E.; Gasser, Gerald E.; Prados, Donald L.; Vaughan, Ronald D.

    2010-01-01

    The Phenological Parameters Estimation Tool (PPET) is a set of algorithms implemented in MATLAB that estimates key vegetative phenological parameters. For a given year, the PPET software package takes in temporally processed vegetation index data (3D spatio-temporal arrays) generated by the time series product tool (TSPT) and outputs spatial grids (2D arrays) of vegetation phenological parameters. As a precursor to PPET, the TSPT uses quality information for each pixel of each date to remove bad or suspect data, and then interpolates and digitally fills data voids in the time series to produce a continuous, smoothed vegetation index product. During processing, the TSPT displays NDVI (Normalized Difference Vegetation Index) time series plots and images from the temporally processed pixels. Both the TSPT and PPET currently use moderate resolution imaging spectroradiometer (MODIS) satellite multispectral data as a default, but each software package is modifiable and could be used with any high-temporal-rate remote sensing data collection system that is capable of producing vegetation indices. Raw MODIS data from the Aqua and Terra satellites is processed using the TSPT to generate a filtered time series data product. The PPET then uses the TSPT output to generate phenological parameters for desired locations. PPET output data tiles are mosaicked into a Conterminous United States (CONUS) data layer using ERDAS IMAGINE, or equivalent software package. Mosaics of the vegetation phenology data products are then reprojected to the desired map projection using ERDAS IMAGINE

  12. Manufactured Homes Tool

    2005-03-09

    The MH Tool software is designed to evaluate existing and new manufactured homes for structural adequacy in high winds. Users define design elements of a manufactured home and then select the hazard(s) for analysis. MH Tool then calculates and reports structural analysis results for the specified design and hazard Method of Solution: Design engineers input information (geometries, materials, etc.) describing the structure of a manufactured home, from which the software automatically creates a mathematical model.more » Windows, doors, and interior walls can be added to the initial design. HUD Code loads (wind, snow loads, interior live loads, etc.) are automatically applied. A finite element analysis is automatically performed using a third party solver to find forces and stresses throughout the structure. The designer may then employ components of strength (and cost) most appropriate for the loads that must be carried at each location, and then re-run the analysis for verification. If forces and stresses are still within tolerable limits (such as the HUD requirements), construction costs would be reduced without sacrificing quality.« less

  13. Knowing about tools: neural correlates of tool familiarity and experience.

    PubMed

    Vingerhoets, Guy

    2008-04-15

    The observation of tools is known to elicit a distributed cortical network that reflects close-knit relations of semantic, action-related, and perceptual knowledge. The neural correlates underlying the critical knowledge of skilled tool use, however, remain to be elucidated. In this study, functional magnetic resonance imaging in 14 volunteers compares neural activation during the observation of familiar tools versus equally graspable unfamiliar tools of which the observers have little, if any, functional knowledge. In a second paradigm, the level of tool-experience is investigated by comparing the neural effects of observing frequently versus infrequently used familiar tools. Both familiar and unfamiliar tools activate the classic neural network associated with tool representations. Direct comparison of the activation patterns during the observation of familiar and unfamiliar tools in a priori determined regions of interest (p<0.05, corrected) reveals activation in the temporal (left lateral posterior middle temporal gyrus) and parietal cortices (left supramarginal gyrus, left inferior parietal lobule, and left precuneus). It is hypothesized that the parietal activity underlies tool-use knowledge, with supramarginal gyrus storing information about limb and hand positions, and precuneus storing visuospatial information about hand-tool interactions. As no frontal activation survived this contrast, it appears that premotor activity is unrelated to experience based motor knowledge of tool use/function, but rather, is elicited by any graspable tool. Confrontation with unfamiliar or infrequently used tools reveals an increase in inferior temporal and medial and lateral occipital activation, predominantly in the left hemisphere, suggesting that these regions reflect visual feature processing for tool identification.

  14. Understanding the Tools You Use.

    ERIC Educational Resources Information Center

    Furtaw, Clay; Dose, Claus D.

    1993-01-01

    "Power Tools--Design and Application" (Furtaw) looks at differences between professional and ordinary consumer tools. "Low Budget Laser Printing Solutions" (Dose) gives graphic arts instructors tips on purchasing equipment for high quality output. (SK)

  15. New Tool to Predict Glaucoma

    MedlinePlus

    ... News About Us Donate In This Section A New Tool to Predict Glaucoma email Send this article ... determine if a patient has glaucoma. Recently, a new tool has become available to eye care specialists ...

  16. A Scalable Tools Communication Infrastructure

    SciTech Connect

    Buntinas, Darius; Bosilca, George; Graham, Richard L; Vallee, Geoffroy R; Watson, Gregory R.

    2008-01-01

    The Scalable Tools Communication Infrastructure (STCI) is an open source collaborative effort intended to provide high-performance, scalable, resilient, and portable communications and process control services for a wide variety of user and system tools. STCI is aimed specifically at tools for ultrascale computing and uses a component architecture to simplify tailoring the infrastructure to a wide range of scenarios. This paper describes STCI's design philosophy, the various components that will be used to provide an STCI implementation for a range of ultrascale platforms, and a range of tool types. These include tools supporting parallel run-time environments, such as MPI, parallel application correctness tools and performance analysis tools, as well as system monitoring and management tools.

  17. Wafer handling and placement tool

    DOEpatents

    Witherspoon, Linda L.

    1988-01-05

    A spring arm tool is provided for clamp engaging and supporting wafers while the tool is hand held. The tool includes a pair of relatively swingable jaw element supporting support arms and the jaw elements are notched to enjoy multiple point contact with a wafer peripheral portion. Also, one disclosed form of the tool includes remotely operable workpiece ejecting structure carried by the jaw elements thereof.

  18. Aperture Photometry Tool

    NASA Astrophysics Data System (ADS)

    Laher, Russ R.; Gorjian, Varoujan; Rebull, Luisa M.; Masci, Frank J.; Fowler, John W.; Helou, George; Kulkarni, Shrinivas R.; Law, Nicholas M.

    2012-07-01

    Aperture Photometry Tool (APT) is software for astronomers and students interested in manually exploring the photometric qualities of astronomical images. It is a graphical user interface (GUI) designed to allow the image data associated with aperture photometry calculations for point and extended sources to be visualized and, therefore, more effectively analyzed. The finely tuned layout of the GUI, along with judicious use of color-coding and alerting, is intended to give maximal user utility and convenience. Simply mouse-clicking on a source in the displayed image will instantly draw a circular or elliptical aperture and sky annulus around the source and will compute the source intensity and its uncertainty, along with several commonly used measures of the local sky background and its variability. The results are displayed and can be optionally saved to an aperture-photometry-table file and plotted on graphs in various ways using functions available in the software. APT is geared toward processing sources in a small number of images and is not suitable for bulk processing a large number of images, unlike other aperture photometry packages (e.g., SExtractor). However, APT does have a convenient source-list tool that enables calculations for a large number of detections in a given image. The source-list tool can be run either in automatic mode to generate an aperture photometry table quickly or in manual mode to permit inspection and adjustment of the calculation for each individual detection. APT displays a variety of useful graphs with just the push of a button, including image histogram, x and y aperture slices, source scatter plot, sky scatter plot, sky histogram, radial profile, curve of growth, and aperture-photometry-table scatter plots and histograms. APT has many functions for customizing the calculations, including outlier rejection, pixel "picking" and "zapping," and a selection of source and sky models. The radial-profile-interpolation source model

  19. Screw/stud removal tool

    NASA Technical Reports Server (NTRS)

    Daniels, K.; Herrick, D. E.; Rothermel, L.

    1980-01-01

    Tool removes stubborn panheaded screws or studs where conventional tools would be either too weak or inconvenient to use. Screws with damaged heads or slots can also be removed this way. Tool can be worked with one hand and easily fits limited-access and blind areas. It can be made in various sizes to fit different screwheads.

  20. Semantic Tools in Information Retrieval.

    ERIC Educational Resources Information Center

    Rubinoff, Morris; Stone, Don C.

    This report discusses the problem of the meansings of words used in information retrieval systems, and shows how semantic tools can aid in the communication which takes place between indexers and searchers via index terms. After treating the differing use of semantic tools in different types of systems, two tools (classification tables and…

  1. Online Algebraic Tools for Teaching

    ERIC Educational Resources Information Center

    Kurz, Terri L.

    2011-01-01

    Many free online tools exist to complement algebraic instruction at the middle school level. This article presents findings that analyzed the features of algebraic tools to support learning. The findings can help teachers select appropriate tools to facilitate specific topics. (Contains 1 table and 4 figures.)

  2. Time Ordered Astrophysics Scalable Tools

    SciTech Connect

    Kisner, Theodore; Collier, Aaron

    2011-12-14

    This software package provides tools for astrophysical experiments which record data in the form of individual time streams from discrete detectors. TOAST provides tools from meta-data manipulation and job set up, I/O operation, telescope pointing reconstruction, and map-making. It also provides tools for constructing simulated observations.

  3. Bio Risk Assessment Tool

    SciTech Connect

    Pohl, Phillip

    2004-07-22

    The Biosecurity Risk Assessment Tool (BRAT) is a new type of computer application for the screening-level assessment of risk to dairy operations. BRAT for Dairies is designed to be intuitive and easy to use. Users enter basic data-property address, feed management, employee population, and so on - into the interface. Using these data and rules found in an expert system. BRAT for Dairies consults appropriate sections of its database. The expert system determines the risk implications of the basic data, e.g. diseases are closely tied to pen location with respect to the outside world, When the analysis is complete, BRAT for Dairies evaluates and allocates the risk for each hazard, ranks the risks, and displays the results graphically.

  4. Outyear Budgeting Tool

    2010-12-31

    OBTool performs the following: • Consistent method and tool to develop/estimate fiscal year (FY) 2010 and outyear budget/estimates • Maintain configuration control on resource rates and changes to outyear budget estimates, while allowing for accessibility, accountability, and tracking shared access between program managers, facility managers (FMs), project managers (PMs), cost account managers (CAMs), and project controls engineers (PCEs) • Consistency in budget estimating methodology, including scope, requirements, basis of estimates, resources, activities, escalation, and presentationmore » of documentation in tasks and execution plans and reports • Ability to sync (i.e. export) and import data into Primavera and Cobra to the lifecycle baseline file« less

  5. Transmission Planning Analysis Tool

    SciTech Connect

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identify weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.

  6. Document Flowdown Tool

    SciTech Connect

    2010-12-31

    DFTool performs the following: • A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. • Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. • Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. • Ability to be accessed by all personnel (particularly document owners). • Shows both document flow-up and flow-down. • Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). • Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level

  7. Climate Data Analysis Tools

    2009-12-01

    Climate Data Analysis Tools (CDAT) is a software infrastructure that uses an object-oriented scripting language to link together separate software subsystems and packages thus forming an integrated environment for solving model diagnosis problems, The power of the system comes from Python and its ability to seamlissly interconnect software. Python provides a general purpose and full-featured scripting language with a variety of user interfaces including command-line interaction, stand-alone scripts (applications) and fraphical user interfaces (GUI). Themore » CDAT subsystems, implemented as modules, provide access to and management of gridded data (Climate Data Management Systems or CDMS); large-array numerical operations (Numerical Python); and visualization (Visualization and Control System or VCS).« less

  8. Kate's Model Verification Tools

    NASA Technical Reports Server (NTRS)

    Morgan, Steve

    1991-01-01

    Kennedy Space Center's Knowledge-based Autonomous Test Engineer (KATE) is capable of monitoring electromechanical systems, diagnosing their errors, and even repairing them when they crash. A survey of KATE's developer/modelers revealed that they were already using a sophisticated set of productivity enhancing tools. They did request five more, however, and those make up the body of the information presented here: (1) a transfer function code fitter; (2) a FORTRAN-Lisp translator; (3) three existing structural consistency checkers to aid in syntax checking their modeled device frames; (4) an automated procedure for calibrating knowledge base admittances to protect KATE's hardware mockups from inadvertent hand valve twiddling; and (5) three alternatives for the 'pseudo object', a programming patch that currently apprises KATE's modeling devices of their operational environments.

  9. Rig Diagnostic Tools

    NASA Technical Reports Server (NTRS)

    Soileau, Kerry M.; Baicy, John W.

    2008-01-01

    Rig Diagnostic Tools is a suite of applications designed to allow an operator to monitor the status and health of complex networked systems using a unique interface between Java applications and UNIX scripts. The suite consists of Java applications, C scripts, Vx- Works applications, UNIX utilities, C programs, and configuration files. The UNIX scripts retrieve data from the system and write them to a certain set of files. The Java side monitors these files and presents the data in user-friendly formats for operators to use in making troubleshooting decisions. This design allows for rapid prototyping and expansion of higher-level displays without affecting the basic data-gathering applications. The suite is designed to be extensible, with the ability to add new system components in building block fashion without affecting existing system applications. This allows for monitoring of complex systems for which unplanned shutdown time comes at a prohibitive cost.

  10. Parallelism in System Tools

    SciTech Connect

    Matney, Sr., Kenneth D; Shipman, Galen M

    2010-01-01

    The Cray XT, when employed in conjunction with the Lustre filesystem, has provided the ability to generate huge amounts of data in the form of many files. Typically, this is accommodated by satisfying the requests of large numbers of Lustre clients in parallel. In contrast, a single service node (Lustre client) cannot adequately service such datasets. This means that the use of traditional UNIX tools like cp, tar, et alli (with have no parallel capability) can result in substantial impact to user productivity. For example, to copy a 10 TB dataset from the service node using cp would take about 24 hours, under more or less ideal conditions. During production operation, this could easily extend to 36 hours. In this paper, we introduce the Lustre User Toolkit for Cray XT, developed at the Oak Ridge Leadership Computing Facility (OLCF). We will show that Linux commands, implementing highly parallel I/O algorithms, provide orders of magnitude greater performance, greatly reducing impact to productivity.

  11. Flight Operations Analysis Tool

    NASA Technical Reports Server (NTRS)

    Easter, Robert; Herrell, Linda; Pomphrey, Richard; Chase, James; Wertz Chen, Julie; Smith, Jeffrey; Carter, Rebecca

    2006-01-01

    Flight Operations Analysis Tool (FLOAT) is a computer program that partly automates the process of assessing the benefits of planning spacecraft missions to incorporate various combinations of launch vehicles and payloads. Designed primarily for use by an experienced systems engineer, FLOAT makes it possible to perform a preliminary analysis of trade-offs and costs of a proposed mission in days, whereas previously, such an analysis typically lasted months. FLOAT surveys a variety of prior missions by querying data from authoritative NASA sources pertaining to 20 to 30 mission and interface parameters that define space missions. FLOAT provides automated, flexible means for comparing the parameters to determine compatibility or the lack thereof among payloads, spacecraft, and launch vehicles, and for displaying the results of such comparisons. Sparseness, typical of the data available for analysis, does not confound this software. FLOAT effects an iterative process that identifies modifications of parameters that could render compatible an otherwise incompatible mission set.

  12. Transmission Planning Analysis Tool

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identifymore » weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.« less

  13. Tools for Understanding Identity

    SciTech Connect

    Creese, Sadie; Gibson-Robinson, Thomas; Goldsmith, Michael; Hodges, Duncan; Kim, Dee DH; Love, Oriana J.; Nurse, Jason R.; Pike, William A.; Scholtz, Jean

    2013-12-28

    Identity attribution and enrichment is critical to many aspects of law-enforcement and intelligence gathering; this identity typically spans a number of domains in the natural-world such as biographic information (factual information – e.g. names, addresses), biometric information (e.g. fingerprints) and psychological information. In addition to these natural-world projections of identity, identity elements are projected in the cyber-world. Conversely, undesirable elements may use similar techniques to target individuals for spear-phishing attacks (or worse), and potential targets or their organizations may want to determine how to minimize the attack surface exposed. Our research has been exploring the construction of a mathematical model for identity that supports such holistic identities. The model captures the ways in which an identity is constructed through a combination of data elements (e.g. a username on a forum, an address, a telephone number). Some of these elements may allow new characteristics to be inferred, hence enriching the holistic view of the identity. An example use-case would be the inference of real names from usernames, the ‘path’ created by inferring new elements of identity is highlighted in the ‘critical information’ panel. Individual attribution exercises can be understood as paths through a number of elements. Intuitively the entire realizable ‘capability’ can be modeled as a directed graph, where the elements are nodes and the inferences are represented by links connecting one or more antecedents with a conclusion. The model can be operationalized with two levels of tool support described in this paper, the first is a working prototype, the second is expected to reach prototype by July 2013: Understanding the Model The tool allows a user to easily determine, given a particular set of inferences and attributes, which elements or inferences are of most value to an investigator (or an attacker). The tool is also able to take

  14. Bio Risk Assessment Tool

    2004-07-22

    The Biosecurity Risk Assessment Tool (BRAT) is a new type of computer application for the screening-level assessment of risk to dairy operations. BRAT for Dairies is designed to be intuitive and easy to use. Users enter basic data-property address, feed management, employee population, and so on - into the interface. Using these data and rules found in an expert system. BRAT for Dairies consults appropriate sections of its database. The expert system determines the riskmore » implications of the basic data, e.g. diseases are closely tied to pen location with respect to the outside world, When the analysis is complete, BRAT for Dairies evaluates and allocates the risk for each hazard, ranks the risks, and displays the results graphically.« less

  15. Climate Data Analysis Tools

    SciTech Connect

    2009-12-01

    Climate Data Analysis Tools (CDAT) is a software infrastructure that uses an object-oriented scripting language to link together separate software subsystems and packages thus forming an integrated environment for solving model diagnosis problems, The power of the system comes from Python and its ability to seamlissly interconnect software. Python provides a general purpose and full-featured scripting language with a variety of user interfaces including command-line interaction, stand-alone scripts (applications) and fraphical user interfaces (GUI). The CDAT subsystems, implemented as modules, provide access to and management of gridded data (Climate Data Management Systems or CDMS); large-array numerical operations (Numerical Python); and visualization (Visualization and Control System or VCS).

  16. Arctic region mapping tool

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    2012-08-01

    An interactive online mapping tool is now available to assist with scientific, environmental, and emergency response needs in the Arctic region, the National Oceanic and Atmospheric Administration (NOAA) announced on 31 July. The Environmental Response Management Application (ERMA®) already has been used in other regions, including in the Gulf of Mexico, as part of the response to the Deepwater Horizon oil spill in 2010. The tool—which is a product of the combined work of NOAA, the U.S. Department of the Interior's Bureau of Safety and Environmental Enforcement (BSEE), the University of New Hampshire, and others—offers near-real time oceanographic observations, weather data, environmental and commercial information, and other data.

  17. Document Flowdown Tool

    2010-12-31

    DFTool performs the following: • A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. • Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. • Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. • Ability to be accessed by all personnel (particularly document owners). •more » Shows both document flow-up and flow-down. • Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). • Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level« less

  18. Downhole tool adapted for telemetry

    DOEpatents

    Hall, David R.; Fox, Joe

    2010-12-14

    A cycleable downhole tool such as a Jar, a hydraulic hammer, and a shock absorber adapted for telemetry. This invention applies to other tools where the active components of the tool are displaced when the tool is rotationally or translationally cycled. The invention consists of inductive or contact transmission rings that are connected by an extensible conductor. The extensible conductor permits the transmission of the signal before, after, and during the cycling of the tool. The signal may be continuous or intermittent during cycling. The invention also applies to downhole tools that do not cycle, but in operation are under such stress that an extensible conductor is beneficial. The extensible conductor may also consist of an extensible portion and a fixed portion. The extensible conductor also features clamps that maintain the conductor under stresses greater than that seen by the tool, and seals that are capable of protecting against downhole pressure and contamination.

  19. Neutron multiplicity analysis tool

    SciTech Connect

    Stewart, Scott L

    2010-01-01

    I describe the capabilities of the EXCOM (EXcel based COincidence and Multiplicity) calculation tool which is used to analyze experimental data or simulated neutron multiplicity data. The input to the program is the count-rate data (including the multiplicity distribution) for a measurement, the isotopic composition of the sample and relevant dates. The program carries out deadtime correction and background subtraction and then performs a number of analyses. These are: passive calibration curve, known alpha and multiplicity analysis. The latter is done with both the point model and with the weighted point model. In the current application EXCOM carries out the rapid analysis of Monte Carlo calculated quantities and allows the user to determine the magnitude of sample perturbations that lead to systematic errors. Neutron multiplicity counting is an assay method used in the analysis of plutonium for safeguards applications. It is widely used in nuclear material accountancy by international (IAEA) and national inspectors. The method uses the measurement of the correlations in a pulse train to extract information on the spontaneous fission rate in the presence of neutrons from ({alpha},n) reactions and induced fission. The measurement is relatively simple to perform and gives results very quickly ({le} 1 hour). By contrast, destructive analysis techniques are extremely costly and time consuming (several days). By improving the achievable accuracy of neutron multiplicity counting, a nondestructive analysis technique, it could be possible to reduce the use of destructive analysis measurements required in safeguards applications. The accuracy of a neutron multiplicity measurement can be affected by a number of variables such as density, isotopic composition, chemical composition and moisture in the material. In order to determine the magnitude of these effects on the measured plutonium mass a calculational tool, EXCOM, has been produced using VBA within Excel. This

  20. Hurricane Data Analysis Tool

    NASA Technical Reports Server (NTRS)

    Liu, Zhong; Ostrenga, Dana; Leptoukh, Gregory

    2011-01-01

    In order to facilitate Earth science data access, the NASA Goddard Earth Sciences Data Information Services Center (GES DISC) has developed a web prototype, the Hurricane Data Analysis Tool (HDAT; URL: http://disc.gsfc.nasa.gov/HDAT), to allow users to conduct online visualization and analysis of several remote sensing and model datasets for educational activities and studies of tropical cyclones and other weather phenomena. With a web browser and few mouse clicks, users can have a full access to terabytes of data and generate 2-D or time-series plots and animation without downloading any software and data. HDAT includes data from the NASA Tropical Rainfall Measuring Mission (TRMM), the NASA Quick Scatterometer(QuikSCAT) and NECP Reanalysis, and the NCEP/CPC half-hourly, 4-km Global (60 N - 60 S) IR Dataset. The GES DISC archives TRMM data. The daily global rainfall product derived from the 3-hourly multi-satellite precipitation product (3B42 V6) is available in HDAT. The TRMM Microwave Imager (TMI) sea surface temperature from the Remote Sensing Systems is in HDAT as well. The NASA QuikSCAT ocean surface wind and the NCEP Reanalysis provide ocean surface and atmospheric conditions, respectively. The global merged IR product, also known as, the NCEP/CPC half-hourly, 4-km Global (60 N -60 S) IR Dataset, is one of TRMM ancillary datasets. They are globally-merged pixel-resolution IR brightness temperature data (equivalent blackbody temperatures), merged from all available geostationary satellites (GOES-8/10, METEOSAT-7/5 & GMS). The GES DISC has collected over 10 years of the data beginning from February of 2000. This high temporal resolution (every 30 minutes) dataset not only provides additional background information to TRMM and other satellite missions, but also allows observing a wide range of meteorological phenomena from space, such as, hurricanes, typhoons, tropical cyclones, mesoscale convection system, etc. Basic functions include selection of area of

  1. CSAM Metrology Software Tool

    NASA Technical Reports Server (NTRS)

    Vu, Duc; Sandor, Michael; Agarwal, Shri

    2005-01-01

    CSAM Metrology Software Tool (CMeST) is a computer program for analysis of false-color CSAM images of plastic-encapsulated microcircuits. (CSAM signifies C-mode scanning acoustic microscopy.) The colors in the images indicate areas of delamination within the plastic packages. Heretofore, the images have been interpreted by human examiners. Hence, interpretations have not been entirely consistent and objective. CMeST processes the color information in image-data files to detect areas of delamination without incurring inconsistencies of subjective judgement. CMeST can be used to create a database of baseline images of packages acquired at given times for comparison with images of the same packages acquired at later times. Any area within an image can be selected for analysis, which can include examination of different delamination types by location. CMeST can also be used to perform statistical analyses of image data. Results of analyses are available in a spreadsheet format for further processing. The results can be exported to any data-base-processing software.

  2. Compressor map prediction tool

    NASA Astrophysics Data System (ADS)

    Ravi, Arjun; Sznajder, Lukasz; Bennett, Ian

    2015-08-01

    Shell Global Solutions uses an in-house developed system for remote condition monitoring of centrifugal compressors. It requires field process data collected during operation to calculate and assess the machine's performance. Performance is assessed by comparing live results of polytropic head and efficiency versus design compressor curves provided by the Manufacturer. Typically, these design curves are given for specific suction conditions. The further these conditions on site deviate from those prescribed at design, the less accurate the health assessment of the compressor becomes. To address this specified problem, a compressor map prediction tool is proposed. The original performance curves of polytropic head against volumetric flow for varying rotational speeds are used as an input to define a range of Mach numbers within which the non-dimensional invariant performance curve of head and volume flow coefficient is generated. The new performance curves of polytropic head vs. flow for desired set of inlet conditions are then back calculated using the invariant non-dimensional curve. Within the range of Mach numbers calculated from design data, the proposed methodology can predict polytropic head curves at a new set of inlet conditions within an estimated 3% accuracy. The presented methodology does not require knowledge of detailed impeller geometry such as throat areas, blade number, blade angles, thicknesses nor other aspects of the aerodynamic design - diffusion levels, flow angles, etc. The only required mechanical design feature is the first impeller tip diameter. Described method makes centrifugal compressor surveillance activities more accurate, enabling precise problem isolation affecting machine's performance.

  3. PD and CL Tool

    2007-03-01

    This software is a tool used to quickly solve for probability of success and confidence calculations for binomial data. This is the equation that allows the calculation of confidence level based on the target probability of success, the number of trials in a test and the number of misses (failed trials) allowed in a test plan. This equation is difficult to use and for plans other than when the number of misses allowed is zeromore » the equation cannot be solved algebraically for the number of trials required. The equation then has to be solved numerically for the number or required trials by repeatedly guessing numbers of trials and solving the equation until the confidence level is met or exceeded. This process is tiresome when done manually but the equation is easily programmed into a computer. Tables of these results can be found in statistical texts and on the internet. This software program allows the user to quickly solve the equation by plugging in the known values and solving the equation.« less

  4. Tool and Fixture Design

    SciTech Connect

    Graham, Mark W.

    2015-07-28

    In a manufacturing process, a need is identified and a product is created to fill this need. While design and engineering of the final product is important, the tools and fixtures that aid in the creation of the final product are just as important, if not more so. Power supplies assembled at the TA-55 PF-5 have been designed by an excellent engineering team. The task in PF-5 now is to ensure that all steps of the assembly and manufacturing process can be completed safely, reliably, and in a quality repeatable manner. One of these process steps involves soldering fine wires to an electrical connector. During the process development phase, the method of soldering included placing the power supply in a vice in order to manipulate it into a position conducive to soldering. This method is unacceptable from a reliability, repeatability, and ergonomic standpoint. To combat these issues, a fixture was designed to replace the current method. To do so, a twelve step engineering design process was used to create the fixture that would provide a solution to a multitude of problems, and increase the safety and efficiency of production.

  5. Grid Visualization Tool

    NASA Technical Reports Server (NTRS)

    Chouinard, Caroline; Fisher, Forest; Estlin, Tara; Gaines, Daniel; Schaffer, Steven

    2005-01-01

    The Grid Visualization Tool (GVT) is a computer program for displaying the path of a mobile robotic explorer (rover) on a terrain map. The GVT reads a map-data file in either portable graymap (PGM) or portable pixmap (PPM) format, representing a gray-scale or color map image, respectively. The GVT also accepts input from path-planning and activity-planning software. From these inputs, the GVT generates a map overlaid with one or more rover path(s), waypoints, locations of targets to be explored, and/or target-status information (indicating success or failure in exploring each target). The display can also indicate different types of paths or path segments, such as the path actually traveled versus a planned path or the path traveled to the present position versus planned future movement along a path. The program provides for updating of the display in real time to facilitate visualization of progress. The size of the display and the map scale can be changed as desired by the user. The GVT was written in the C++ language using the Open Graphics Library (OpenGL) software. It has been compiled for both Sun Solaris and Linux operating systems.

  6. PD and CL Tool

    SciTech Connect

    Steele, David; Bouchier, Frank

    2007-03-01

    This software is a tool used to quickly solve for probability of success and confidence calculations for binomial data. This is the equation that allows the calculation of confidence level based on the target probability of success, the number of trials in a test and the number of misses (failed trials) allowed in a test plan. This equation is difficult to use and for plans other than when the number of misses allowed is zero the equation cannot be solved algebraically for the number of trials required. The equation then has to be solved numerically for the number or required trials by repeatedly guessing numbers of trials and solving the equation until the confidence level is met or exceeded. This process is tiresome when done manually but the equation is easily programmed into a computer. Tables of these results can be found in statistical texts and on the internet. This software program allows the user to quickly solve the equation by plugging in the known values and solving the equation.

  7. Java Radar Analysis Tool

    NASA Technical Reports Server (NTRS)

    Zaczek, Mariusz P.

    2005-01-01

    Java Radar Analysis Tool (JRAT) is a computer program for analyzing two-dimensional (2D) scatter plots derived from radar returns showing pieces of the disintegrating Space Shuttle Columbia. JRAT can also be applied to similar plots representing radar returns showing aviation accidents, and to scatter plots in general. The 2D scatter plots include overhead map views and side altitude views. The superposition of points in these views makes searching difficult. JRAT enables three-dimensional (3D) viewing: by use of a mouse and keyboard, the user can rotate to any desired viewing angle. The 3D view can include overlaid trajectories and search footprints to enhance situational awareness in searching for pieces. JRAT also enables playback: time-tagged radar-return data can be displayed in time order and an animated 3D model can be moved through the scene to show the locations of the Columbia (or other vehicle) at the times of the corresponding radar events. The combination of overlays and playback enables the user to correlate a radar return with a position of the vehicle to determine whether the return is valid. JRAT can optionally filter single radar returns, enabling the user to selectively hide or highlight a desired radar return.

  8. Draper Station Analysis Tool

    NASA Technical Reports Server (NTRS)

    Bedrossian, Nazareth; Jang, Jiann-Woei; McCants, Edward; Omohundro, Zachary; Ring, Tom; Templeton, Jeremy; Zoss, Jeremy; Wallace, Jonathan; Ziegler, Philip

    2011-01-01

    Draper Station Analysis Tool (DSAT) is a computer program, built on commercially available software, for simulating and analyzing complex dynamic systems. Heretofore used in designing and verifying guidance, navigation, and control systems of the International Space Station, DSAT has a modular architecture that lends itself to modification for application to spacecraft or terrestrial systems. DSAT consists of user-interface, data-structures, simulation-generation, analysis, plotting, documentation, and help components. DSAT automates the construction of simulations and the process of analysis. DSAT provides a graphical user interface (GUI), plus a Web-enabled interface, similar to the GUI, that enables a remotely located user to gain access to the full capabilities of DSAT via the Internet and Webbrowser software. Data structures are used to define the GUI, the Web-enabled interface, simulations, and analyses. Three data structures define the type of analysis to be performed: closed-loop simulation, frequency response, and/or stability margins. DSAT can be executed on almost any workstation, desktop, or laptop computer. DSAT provides better than an order of magnitude improvement in cost, schedule, and risk assessment for simulation based design and verification of complex dynamic systems.

  9. Range Process Simulation Tool

    NASA Technical Reports Server (NTRS)

    Phillips, Dave; Haas, William; Barth, Tim; Benjamin, Perakath; Graul, Michael; Bagatourova, Olga

    2005-01-01

    Range Process Simulation Tool (RPST) is a computer program that assists managers in rapidly predicting and quantitatively assessing the operational effects of proposed technological additions to, and/or upgrades of, complex facilities and engineering systems such as the Eastern Test Range. Originally designed for application to space transportation systems, RPST is also suitable for assessing effects of proposed changes in industrial facilities and large organizations. RPST follows a model-based approach that includes finite-capacity schedule analysis and discrete-event process simulation. A component-based, scalable, open architecture makes RPST easily and rapidly tailorable for diverse applications. Specific RPST functions include: (1) definition of analysis objectives and performance metrics; (2) selection of process templates from a processtemplate library; (3) configuration of process models for detailed simulation and schedule analysis; (4) design of operations- analysis experiments; (5) schedule and simulation-based process analysis; and (6) optimization of performance by use of genetic algorithms and simulated annealing. The main benefits afforded by RPST are provision of information that can be used to reduce costs of operation and maintenance, and the capability for affordable, accurate, and reliable prediction and exploration of the consequences of many alternative proposed decisions.

  10. Archiving tools for EOS

    NASA Astrophysics Data System (ADS)

    Sindrilaru, Elvin-Alin; Peters, Andreas-Joachim; Duellmann, Dirk

    2015-12-01

    Archiving data to tape is a critical operation for any storage system, especially for the EOS system at CERN which holds production data for all major LHC experiments. Each collaboration has an allocated quota it can use at any given time therefore, a mechanism for archiving "stale" data is needed so that storage space is reclaimed for online analysis operations. The archiving tool that we propose for EOS aims to provide a robust client interface for moving data between EOS and CASTOR (tape backed storage system) while enforcing best practices when it comes to data integrity and verification. All data transfers are done using a third-party copy mechanism which ensures point-to- point communication between the source and destination, thus providing maximum aggregate throughput. Using ZMQ message-passing paradigm and a process-based approach enabled us to achieve optimal utilisation of the resources and a stateless architecture which can easily be tuned during operation. The modular design and the implementation done in a high-level language like Python, has enabled us to easily extended the code base to address new demands like offering full and incremental backup capabilities.

  11. Dataflow Design Tool: User's Manual

    NASA Technical Reports Server (NTRS)

    Jones, Robert L., III

    1996-01-01

    The Dataflow Design Tool is a software tool for selecting a multiprocessor scheduling solution for a class of computational problems. The problems of interest are those that can be described with a dataflow graph and are intended to be executed repetitively on a set of identical processors. Typical applications include signal processing and control law problems. The software tool implements graph-search algorithms and analysis techniques based on the dataflow paradigm. Dataflow analyses provided by the software are introduced and shown to effectively determine performance bounds, scheduling constraints, and resource requirements. The software tool provides performance optimization through the inclusion of artificial precedence constraints among the schedulable tasks. The user interface and tool capabilities are described. Examples are provided to demonstrate the analysis, scheduling, and optimization functions facilitated by the tool.

  12. Demand Response Quick Assessment Tool

    2008-12-01

    DRQAT (Demand Response Quick Assessment Tool) is the tool for assessing demand response saving potentials for large commercial buildings. This tool is based on EnergyPlus simulations of prototypical buildings and HVAC equipment. The opportunities for demand reduction and cost savings with building demand responsive controls vary tremendously with building type and location. The assessment tools will predict the energy and demand savings, the economic savings, and the thermal comfor impact for various demand responsive strategies.more » Users of the tools will be asked to enter the basic building information such as types, square footage, building envelope, orientation, utility schedule, etc. The assessment tools will then use the prototypical simulation models to calculate the energy and demand reduction potential under certain demand responsive strategies, such as precooling, zonal temperature set up, and chilled water loop and air loop set points adjustment.« less

  13. New tools for learning.

    PubMed

    Dickinson, D

    1999-01-01

    In the last twenty-five years more has been learned about the human brain than in the past history of mankind. Through the use of new technologies such as PET and CAT scans and functional MRI's, it is now possible to see and learn much about the human brain while it is in the process of thinking. The research of neuroscientists, such as Marian Diamond, has demonstrated that the brain changes physiologically as a result of learning and experience--for better or worse--and that plasticity can continue throughout the lifespan. It appears that there are particular kinds of environments that are most conducive to the development of good mental equipment. They are positive, nurturing, stimulating, and encourage action and interaction. Many of the most effective schools and training programs have created such high-challenge low-threat environments. It is also very clear that intelligence is not a static structure, but an open, dynamic system that can continue to develop throughout life. This understanding is being utilized not only in school systems but in the workplace, where training programs show that even at the adult level people are able to develop their intelligence more fully. Corporations such as Motorola have implemented programs in which they are training their employees, managers, and executives to think, problem-solve and create more effectively using strategies developed by such educational innovators as Reuven Feurstein, J.P. Guilford, and Edward de Bono. A most recent development is in the new kinds of technology that make it possible for people to take responsibility for their own learning as they access and process information through the internet, communicate with experts anywhere in the world, and use software that facilitate higher order thinking and problem-solving. Computers are in no way replacing teachers, but rather these new tools allow them to spend more time being facilitators, mentors, and guides. As a result, teachers and students are able

  14. New tools for learning.

    PubMed

    Dickinson, D

    1999-01-01

    In the last twenty-five years more has been learned about the human brain than in the past history of mankind. Through the use of new technologies such as PET and CAT scans and functional MRI's, it is now possible to see and learn much about the human brain while it is in the process of thinking. The research of neuroscientists, such as Marian Diamond, has demonstrated that the brain changes physiologically as a result of learning and experience--for better or worse--and that plasticity can continue throughout the lifespan. It appears that there are particular kinds of environments that are most conducive to the development of good mental equipment. They are positive, nurturing, stimulating, and encourage action and interaction. Many of the most effective schools and training programs have created such high-challenge low-threat environments. It is also very clear that intelligence is not a static structure, but an open, dynamic system that can continue to develop throughout life. This understanding is being utilized not only in school systems but in the workplace, where training programs show that even at the adult level people are able to develop their intelligence more fully. Corporations such as Motorola have implemented programs in which they are training their employees, managers, and executives to think, problem-solve and create more effectively using strategies developed by such educational innovators as Reuven Feurstein, J.P. Guilford, and Edward de Bono. A most recent development is in the new kinds of technology that make it possible for people to take responsibility for their own learning as they access and process information through the internet, communicate with experts anywhere in the world, and use software that facilitate higher order thinking and problem-solving. Computers are in no way replacing teachers, but rather these new tools allow them to spend more time being facilitators, mentors, and guides. As a result, teachers and students are able

  15. Solar Indices Forecasting Tool

    NASA Astrophysics Data System (ADS)

    Henney, Carl John; Shurkin, Kathleen; Arge, Charles; Hill, Frank

    2016-05-01

    Progress to forecast key space weather parameters using SIFT (Solar Indices Forecasting Tool) with the ADAPT (Air Force Data Assimilative Photospheric flux Transport) model is highlighted in this presentation. Using a magnetic flux transport model, ADAPT, we estimate the solar near-side field distribution that is used as input into empirical models for predicting F10.7(solar 10.7 cm, 2.8 GHz, radio flux), the Mg II core-to-wing ratio, and selected bands of solar far ultraviolet (FUV) and extreme ultraviolet (EUV) irradiance. Input to the ADAPT model includes the inferred photospheric magnetic field from the NISP ground-based instruments, GONG & VSM. Besides a status update regarding ADAPT and SIFT models, we will summarize the findings that: 1) the sum of the absolute value of strong magnetic fields, associated with sunspots, is shown to correlate well with the observed daily F10.7 variability (Henney et al. 2012); and 2) the sum of the absolute value of weak magnetic fields, associated with plage regions, is shown to correlate well with EUV and FUV irradiance variability (Henney et al. 2015). This work utilizes data produced collaboratively between Air Force Research Laboratory (AFRL) and the National Solar Observatory (NSO). The ADAPT model development is supported by AFRL. The input data utilized by ADAPT is obtained by NISP (NSO Integrated Synoptic Program). NSO is operated by the Association of Universities for Research in Astronomy (AURA), Inc., under a cooperative agreement with the National Science Foundation (NSF). The 10.7 cm solar radio flux data service, utilized by the ADAPT/SIFT F10.7 forecasting model, is operated by the National Research Council of Canada and National Resources Canada, with the support of the Canadian Space Agency.

  16. Tools for Healthy Tribes

    PubMed Central

    Fleischhacker, Sheila; Byrd, Randi R.; Ramachandran, Gowri; Vu, Maihan; Ries, Amy; Bell, Ronny A.; Evenson, Kelly R.

    2012-01-01

    There is growing recognition that policymakers can promote access to healthy, affordable foods within neighborhoods, schools, childcare centers, and workplaces. Despite the disproportionate risk of obesity and type 2 diabetes among American Indian children and adults, comparatively little attention has been focused on the opportunities tribal policymakers have to implement policies or resolutions to promote access to healthy, affordable foods. This paper presents an approach for integrating formative research into an action-oriented strategy of developing and disseminating tribally led environmental and policy strategies to promote access to and consumption of healthy, affordable foods. This paper explains how the American Indian Healthy Eating Project evolved through five phases and discusses each phase’s essential steps involved, outcomes derived, and lessons learned. Using community-based participatory research and informed by the Social Cognitve Theory and ecologic frameworks, the American Indian Healthy Eating Project was started in fall 2008 and has evolved through five phases: (1) starting the conversation; (2) conducting multidisciplinary formative research; (3) strengthening partnerships and tailoring policy options; (4) disseminating community-generated ideas; and (5) accelerating action while fostering sustainability. Collectively, these phases helped develop and disseminate Tools for Healthy Tribes—a toolkit used to raise awareness among participating tribal policymakers of their opportunities to improve access to healthy, affordable foods. Formal and informal strategies can engage tribal leaders in the development of culturally appropriate and tribe-specific sustainable strategies to improve such access, as well as empower tribal leaders to leverage their authority toward raising a healthier generation of American Indian children. PMID:22898161

  17. Jettison Engineering Trajectory Tool

    NASA Technical Reports Server (NTRS)

    Zaczek, Mariusz; Walter, Patrick; Pascucci, Joseph; Armstrong, Phyllis; Hallbick, Patricia; Morgan, Randal; Cooney, James

    2013-01-01

    The Jettison Engineering Trajectory Tool (JETT) performs the jettison analysis function for any orbiting asset. It provides a method to compute the relative trajectories between an orbiting asset and any jettisoned item (intentional or unintentional) or sublimating particles generated by fluid dumps to assess whether an object is safe to jettison, or if there is a risk with an item that was inadvertently lost overboard. The main concern is the interaction and possible recontact of the jettisoned object with an asset. This supports the analysis that jettisoned items will safely clear the vehicle, ensuring no collisions. The software will reduce the jettison analysis task from one that could take days to complete to one that can be completed in hours, with an analysis that is more comprehensive than the previous method. It provides the ability to define the jettison operation relative to International Space Station (ISS) structure, and provides 2D and 3D plotting capability to allow an analyst to perform a subjective clearance assessment with ISS structures. The developers followed the SMP to create the code and all supporting documentation. The code makes extensive use of the object-oriented format of Java and, in addition, the Model-View-Controller architecture was used in the organization of the code, allowing each piece to be independent of updates to the other pieces. The model category is for maintaining data entered by the user and generated by the analysis. The view category provides capabilities for data entry and displaying all or a portion of the analysis data in tabular, 2D, and 3D representation. The controller category allows for handling events that affect the model or view(s). The JETT utilizes orbital mechanics with complex algorithms. Since JETT is written in JAVA, it is essentially platform-independent.

  18. Computers as tools

    SciTech Connect

    Eriksson, I.V.

    1994-12-31

    The following message was recently posted on a bulletin board and clearly shows the relevance of the conference theme: {open_quotes}The computer and digital networks seem poised to change whole regions of human activity -- how we record knowledge, communicate, learn, work, understand ourselves and the world. What`s the best framework for understanding this digitalization, or virtualization, of seemingly everything? ... Clearly, symbolic tools like the alphabet, book, and mechanical clock have changed some of our most fundamental notions -- self, identity, mind, nature, time, space. Can we say what the computer, a purely symbolic {open_quotes}machine,{close_quotes} is doing to our thinking in these areas? Or is it too early to say, given how much more powerful and less expensive the technology seems destinated to become in the next few decades?{close_quotes} (Verity, 1994) Computers certainly affect our lives and way of thinking but what have computers to do with ethics? A narrow approach would be that on the one hand people can and do abuse computer systems and on the other hand people can be abused by them. Weli known examples of the former are computer comes such as the theft of money, services and information. The latter can be exemplified by violation of privacy, health hazards and computer monitoring. Broadening the concept from computers to information systems (ISs) and information technology (IT) gives a wider perspective. Computers are just the hardware part of information systems which also include software, people and data. Information technology is the concept preferred today. It extends to communication, which is an essential part of information processing. Now let us repeat the question: What has IT to do with ethics? Verity mentioned changes in {open_quotes}how we record knowledge, communicate, learn, work, understand ourselves and the world{close_quotes}.

  19. Alignment Tool For Welding Sensor

    NASA Technical Reports Server (NTRS)

    Gilbert, Jeffrey L.; Steffins, Alfred P.

    1992-01-01

    Alignment tool enables accurate positioning of optoelectronic sensor measuring weld penetration. Designed for use on tungsten/inert-gas welding apparatus, used to adjust position of sensor so photodiode puts out maximum signal. Tangs of slotted cap bent slightly inward to provide spring force holding cap snugly on sensor mount. Tool installed and removed without aid of other tools. Length of pointer adjusted with set-screws. Used with variety of gas cup and electrode lengths.

  20. Slide system for machine tools

    DOEpatents

    Douglass, Spivey S.; Green, Walter L.

    1982-01-01

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  1. Slide system for machine tools

    DOEpatents

    Douglass, S.S.; Green, W.L.

    1980-06-12

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  2. Molecular tools for chemical biotechnology

    PubMed Central

    Galanie, Stephanie; Siddiqui, Michael S.; Smolke, Christina D.

    2013-01-01

    Biotechnological production of high value chemical products increasingly involves engineering in vivo multi-enzyme pathways and host metabolism. Recent approaches to these engineering objectives have made use of molecular tools to advance de novo pathway identification, tunable enzyme expression, and rapid pathway construction. Molecular tools also enable optimization of single enzymes and entire genomes through diversity generation and screening, whole cell analytics, and synthetic metabolic control networks. In this review, we focus on advanced molecular tools and their applications to engineered pathways in host organisms, highlighting the degree to which each tool is generalizable. PMID:23528237

  3. Forming Tool Use Representations: A Neurophysiological Investigation into Tool Exposure

    ERIC Educational Resources Information Center

    Mizelle, John Christopher; Tang, Teresa; Pirouz, Nikta; Wheaton, Lewis A.

    2011-01-01

    Prior work has identified a common left parietofrontal network for storage of tool-related information for various tasks. How these representations become established within this network on the basis of different modes of exposure is unclear. Here, healthy subjects engaged in physical practice (direct exposure) with familiar and unfamiliar tools.…

  4. Data Management Tools

    SciTech Connect

    Ridley, M; Stoker, C

    2001-02-12

    What is data management (DM) and why is it important? As described in the ''Handbook of Data Management'' (Thuraisingham, 1998), data management is the process of understanding the data needs of an organization and making the data available to support the operations of the organization. The ultimate goal of data management is to provide the seamless access and fusion of massive amounts of data, information, and knowledge in a heterogeneous and real-time environment, and to support the functions and decision making processes of an organization. The important questions that need to be asked for proper data management are: who is going to be using the data, what types of data need to be stored, and how will this data be accessed? With these questions answered, the data management system (DMS) can then be created, or an existing system can be modified to meet the needs of the organization. The real importance of a data management system is to provide the end user with a consistent data set of known quality. The elements of a good data management system should include a system that: is modeled to how the data is collected and processed, is very well documented, has specifically defined data elements, and has supporting data documentation. Supporting documentation includes items like quality control (QC) data that is carried with the analytical data, and meta data (information about the data). Supporting documentation can be anything that is useful to the project and that needs to be accessed with the data. Data sets get better the more they are used. As errors and inconsistencies are identified and corrected, the data set improves. A good DMS will achieve this because its design promotes use, and the ultimate value of data is in its use rather than its storage. The development and use of Internet access tools, and existing environmental data management systems, can help reduce the effort and cost associated with setting up a DMS. This presentation will discuss the

  5. Benchmarking short sequence mapping tools

    PubMed Central

    2013-01-01

    Background The development of next-generation sequencing instruments has led to the generation of millions of short sequences in a single run. The process of aligning these reads to a reference genome is time consuming and demands the development of fast and accurate alignment tools. However, the current proposed tools make different compromises between the accuracy and the speed of mapping. Moreover, many important aspects are overlooked while comparing the performance of a newly developed tool to the state of the art. Therefore, there is a need for an objective evaluation method that covers all the aspects. In this work, we introduce a benchmarking suite to extensively analyze sequencing tools with respect to various aspects and provide an objective comparison. Results We applied our benchmarking tests on 9 well known mapping tools, namely, Bowtie, Bowtie2, BWA, SOAP2, MAQ, RMAP, GSNAP, Novoalign, and mrsFAST (mrFAST) using synthetic data and real RNA-Seq data. MAQ and RMAP are based on building hash tables for the reads, whereas the remaining tools are based on indexing the reference genome. The benchmarking tests reveal the strengths and weaknesses of each tool. The results show that no single tool outperforms all others in all metrics. However, Bowtie maintained the best throughput for most of the tests while BWA performed better for longer read lengths. The benchmarking tests are not restricted to the mentioned tools and can be further applied to others. Conclusion The mapping process is still a hard problem that is affected by many factors. In this work, we provided a benchmarking suite that reveals and evaluates the different factors affecting the mapping process. Still, there is no tool that outperforms all of the others in all the tests. Therefore, the end user should clearly specify his needs in order to choose the tool that provides the best results. PMID:23758764

  6. Battery switch for downhole tools

    DOEpatents

    Boling, Brian E.

    2010-02-23

    An electrical circuit for a downhole tool may include a battery, a load electrically connected to the battery, and at least one switch electrically connected in series with the battery and to the load. The at least one switch may be configured to close when a tool temperature exceeds a selected temperature.

  7. High Performance Tools And Technologies

    SciTech Connect

    Collette, M R; Corey, I R; Johnson, J R

    2005-01-24

    This goal of this project was to evaluate the capability and limits of current scientific simulation development tools and technologies with specific focus on their suitability for use with the next generation of scientific parallel applications and High Performance Computing (HPC) platforms. The opinions expressed in this document are those of the authors, and reflect the authors' current understanding and functionality of the many tools investigated. As a deliverable for this effort, we are presenting this report describing our findings along with an associated spreadsheet outlining current capabilities and characteristics of leading and emerging tools in the high performance computing arena. This first chapter summarizes our findings (which are detailed in the other chapters) and presents our conclusions, remarks, and anticipations for the future. In the second chapter, we detail how various teams in our local high performance community utilize HPC tools and technologies, and mention some common concerns they have about them. In the third chapter, we review the platforms currently or potentially available to utilize these tools and technologies on to help in software development. Subsequent chapters attempt to provide an exhaustive overview of the available parallel software development tools and technologies, including their strong and weak points and future concerns. We categorize them as debuggers, memory checkers, performance analysis tools, communication libraries, data visualization programs, and other parallel development aides. The last chapter contains our closing information. Included with this paper at the end is a table of the discussed development tools and their operational environment.

  8. Measuring Light with Useful Tools

    ERIC Educational Resources Information Center

    Peek, Gina; Hebert, Paulette; Frazier, Robert Scott; Knag, Mihyun

    2013-01-01

    Lighting, a necessary part of our home and work environment, is often considered as an afterthought. This article describes tools that Extension educators (Agriculture, Family and Consumer Sciences, and 4-H) can use to measure light levels. 4-H youth may also participate. These tools include light meters and Illuminating Engineering Society (IES)…

  9. Diagnostic Tools for Learning Organizations.

    ERIC Educational Resources Information Center

    Moilanen, Raili

    2001-01-01

    The Learning Organization Diamond Tool was designed for holistic analysis of 10 learning organization elements at the individual and organizational levels. A test in 25 Finnish organizations established validity. Comparison with existing tools showed that differences derive from their different purposes. (Contains 33 references.) (SK)

  10. CERES Search and Subset Tool

    Atmospheric Science Data Center

    2016-06-24

    article title:  CERES Search and Subset Tool View larger image The ASDC CERES Search and Subset Web Application provides a single, easy to use web interface ... of the archived granules or netCDF. Access at CERES Search and Subset Tool   The ASDC CERES Search and ...

  11. Vehicle assisted harpoon breaching tool

    SciTech Connect

    Pacheco, James E.; Highland, Steven E.

    2011-02-15

    A harpoon breaching tool that allows security officers, SWAT teams, police, firemen, soldiers, or others to forcibly breach metal doors or walls very quickly (in a few seconds), without explosives. The harpoon breaching tool can be mounted to a vehicle's standard receiver hitch.

  12. Rib forming tool for tubing

    DOEpatents

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  13. Tools for Ensuring Program Integrity.

    ERIC Educational Resources Information Center

    Office of Student Financial Assistance (ED), Washington, DC.

    This training document for financial assistance professionals discusses ensuring program integrity in student financial aid and describes some tools for ensuring internal and external program integrity. The training focuses on these tools and resources: (1) the Federal Student Aid (FSA) Schools Portal; (2) the Information for Financial Aid…

  14. Assessment Tools for Adult Education.

    ERIC Educational Resources Information Center

    Shefrin, Carol; Shafer, Dehra; Forlizzi, Lori

    The Assessment Tools for Adult Education project was designed to provide training and support to staff of the Pennsylvania Bureau of Adult Basic and Literacy Education (ABLE) funded programs to help them use assessment tools and procedures to document the learning gains of the adult students they serve. The following candidate assessment…

  15. The Virtual Intercultural Team Tool

    ERIC Educational Resources Information Center

    Rus, Calin

    2010-01-01

    This article describes the Virtual Intercultural Team Tool (VITT) and discusses its processes and benefits. VIIT is a virtual platform designed with the aim of assisting European project teams to improve intercultural communication and build on their cultural diversity for effective implementation of their projects. It is a process-focused tool,…

  16. RSAT: regulatory sequence analysis tools.

    PubMed

    Thomas-Chollier, Morgane; Sand, Olivier; Turatsinze, Jean-Valéry; Janky, Rekin's; Defrance, Matthieu; Vervisch, Eric; Brohée, Sylvain; van Helden, Jacques

    2008-07-01

    The regulatory sequence analysis tools (RSAT, http://rsat.ulb.ac.be/rsat/) is a software suite that integrates a wide collection of modular tools for the detection of cis-regulatory elements in genome sequences. The suite includes programs for sequence retrieval, pattern discovery, phylogenetic footprint detection, pattern matching, genome scanning and feature map drawing. Random controls can be performed with random gene selections or by generating random sequences according to a variety of background models (Bernoulli, Markov). Beyond the original word-based pattern-discovery tools (oligo-analysis and dyad-analysis), we recently added a battery of tools for matrix-based detection of cis-acting elements, with some original features (adaptive background models, Markov-chain estimation of P-values) that do not exist in other matrix-based scanning tools. The web server offers an intuitive interface, where each program can be accessed either separately or connected to the other tools. In addition, the tools are now available as web services, enabling their integration in programmatic workflows. Genomes are regularly updated from various genome repositories (NCBI and EnsEMBL) and 682 organisms are currently supported. Since 1998, the tools have been used by several hundreds of researchers from all over the world. Several predictions made with RSAT were validated experimentally and published.

  17. Multi-purpose tool mitten

    NASA Technical Reports Server (NTRS)

    Wilcomb, E. F.

    1969-01-01

    Tool mitten provides a low reaction torque source of power for wrench, screwdriver, or drill activities. The technique employed prevents the attachments from drifting away from the operator. While the tools are specifically designed for space environments, they can be used on steel scaffolding, in high building maintenance, or underwater environments.

  18. Logistics Process Analysis ToolProcess Analysis Tool

    SciTech Connect

    2008-03-31

    LPAT is the resulting integrated system between ANL-developed Enhanced Logistics Intra Theater Support Tool (ELIST) sponsored by SDDC-TEA and the Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the process Anlysis Tool (PAT) which evolved into a stand=-along tool for detailed process analysis at a location. Combined with ELIST, an inter-installation logistics component was added to enable users to define large logistical agent-based models without having to program. PAT is the evolution of an ANL-developed software system called Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the Process Analysis Tool(PAT) which evolved into a stand-alone tool for detailed process analysis at a location (sponsored by the SDDC-TEA).

  19. Well tool lock mandrel and handling tools therefor

    SciTech Connect

    Higgins, B.D.

    1988-05-24

    A lock mandrel and running tool assembly for setting and locking a well tool in a landing nipple along a well bore is described comprising: a lock mandrel having a body provided with at least one side window; a support shoulder on the body for supporting the mandrel in a no-go landing nipple; a radially movable locking dog in the side window; a longitudinally movable expander sleeve in the body movable within the dog for expanding and locking the dog outwardly and releasing the dog for inward movement, the expander sleeve having an internal annular recess for engagement by a handling tool to move the sleeve upwardly and downwardly and an external annular latch boss along an upper end portion thereof; and a latch ring in the body around the expander sleeve above the locking dog for engagement with the latch boss on the sleeve when the sleeve is at an upper locking position to releasably hold the sleeve in the upper position. The running tool includes a head assembly for connection with an operating tool string; an upper retainer dog assembly supported from the head assembly for releasably coupling the running tool with the body of the lock mandrel; a lower locking lug assembly supported from the head assembly for releasably coupling the running tool with the expander sleeve of the lock mandrel to move the expander sleeve between locking and release positions.

  20. Logistics Process Analysis ToolProcess Analysis Tool

    2008-03-31

    LPAT is the resulting integrated system between ANL-developed Enhanced Logistics Intra Theater Support Tool (ELIST) sponsored by SDDC-TEA and the Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the process Anlysis Tool (PAT) which evolved into a stand=-along tool for detailed process analysis at a location. Combined with ELIST, an inter-installation logistics component wasmore » added to enable users to define large logistical agent-based models without having to program. PAT is the evolution of an ANL-developed software system called Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the Process Analysis Tool(PAT) which evolved into a stand-alone tool for detailed process analysis at a location (sponsored by the SDDC-TEA).« less

  1. Design tool for symbolic substitution

    NASA Astrophysics Data System (ADS)

    Parthasarathi, Ranjani; Jhunjhunwala, Ashok

    1996-11-01

    A design tool that aids in designing, evaluating, and comparing various implementations of optical symbolic substitution is presented. A hierarchical, modular approach to design similar to that used in digital electronics is supported to facilitate the design of large complex systems. This tool is composed of a schematic capture unit, a simulator unit, and an evaluation unit. Starting with the definition of certain basic or integrated optical elements performing well-defined functions, a schematic capture unit helps to design specific functions. The simulator tool helps to verify the design and the evaluation tool determines its complexity. The usefulness of this design tool is demonstrated with an example design of a simple four- function arithmetic logic unit.

  2. Need a Special Tool? Make It Yourself!

    ERIC Educational Resources Information Center

    Mordini, Robert D.

    2007-01-01

    People seem to have created a tool for every purpose. If a person searches diligently, he can usually find the tool he needs. However, several things may affect this process such as time, cost of the tool, and limited tool sources. The solution to all these is to make the tool yourself. People have made tools for many thousands of years, and with…

  3. CD-SEM tool stability and tool-to-tool matching management using image sharpness monitor

    NASA Astrophysics Data System (ADS)

    Abe, Hideaki; Ishibashi, Yasuhiko; Yamazaki, Yuichiro; Kono, Akemi; Maeda, Tatsuya; Miura, Akihiro; Koshihara, Shunsuke; Hibino, Daisuke

    2009-03-01

    As device feature size reduction continues, requirements for Critical Dimension (CD) metrology tools are becoming stricter. For sub-32 nm node, it is important to establish a CD-SEM tool management system with higher sensitivity for tool fluctuation and short Turn around Time (TAT). We have developed a new image sharpness monitoring method, PG monitor. The key feature of this monitoring method is the quantification of tool-induced image sharpness deterioration. The image sharpness index is calculated by a convolution method of image sharpness deterioration function caused by SEM optics feature. The sensitivity of this methodology was tested by the alteration of the beam diameter using astigmatism. PG monitor result can be related to the beam diameter variation that causes CD variation through image sharpness. PG monitor can detect the slight image sharpness change that cannot be noticed by engineer's visual check. Furthermore, PG monitor was applied to tool matching and long-term stability monitoring for multiple tools. As a result, PG monitor was found to have sufficient sensitivity to CD variation in tool matching and long-term stability assessment. The investigation showed that PG monitor can detect CD variation equivalent to ~ 0.1 nm. The CD-SEM tool management system using PG monitor is effective for CD metrology in production.

  4. Electrical contact tool set station

    DOEpatents

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  5. MWD tools improve drilling performance

    SciTech Connect

    Moore, S.D.

    1986-02-01

    Downhole measurement while drilling technology is changing the way many wells are drilled. The capability to understand what is occurring at the drill bit as it actually happens is improving drilling performance, safety, and ultimately cost effectiveness. MWD evolved because of the need to acquire real-time data at the well site. The technology was not developed by vendors as simply an ''add-on'' tool - something an operator didn't realize he needed. MWD, with state-of-the-art, rugged, electronic downhole tools, is the closest thing the petroleum industry has to aerospace engineering. The constraints placed on MWD tools are greater than any other downhole tool-including wireline electric logs - because they are in the hole for long durations, operating under severe hole conditions. MWD tools were first used to monitor directional drilling operations on a real-time basis, More recently vendors have developed formation capabilities for MWD. Tools capable of measuring other drilling parameters such as weight on bit and downhole torque and pressure are also available. MWD technology continues to advance rapidly as the second and third generation of tools and equipment are introduced. Improvements are coming in many areas, but the biggest change will be in the development of new surface equipment to analyze retrieved data. For several years, MWD has been providing a reliable and accurate stream of real-time data from downhole. New software packages for surface equipment will allow the data to be analyzed in new ways to improve drilling efficiencies.

  6. Sheet Bending using Soft Tools

    NASA Astrophysics Data System (ADS)

    Sinke, J.

    2011-05-01

    Sheet bending is usually performed by air bending and V-die bending processes. Both processes apply rigid tools. These solid tools facilitate the generation of software for the numerical control of those processes. When the lower rigid die is replaced with a soft or rubber tool, the numerical control becomes much more difficult, since the soft tool deforms too. Compared to other bending processes the rubber backed bending process has some distinct advantages, like large radius-to-thickness ratios, applicability to materials with topcoats, well defined radii, and the feasibility of forming details (ridges, beads). These advantages may give the process exclusive benefits over conventional bending processes, not only for industries related to mechanical engineering and sheet metal forming, but also for other disciplines like Architecture and Industrial Design The largest disadvantage is that also the soft (rubber) tool deforms. Although the tool deformation is elastic and recovers after each process cycle, the applied force during bending is related to the deformation of the metal sheet and the deformation of the rubber. The deformation of the rubber interacts with the process but also with sheet parameters. This makes the numerical control of the process much more complicated. This paper presents a model for the bending of sheet materials using a rubber lower die. This model can be implemented in software in order to control the bending process numerically. The model itself is based on numerical and experimental research. In this research a number of variables related to the tooling and the material have been evaluated. The numerical part of the research was used to investigate the influence of the features of the soft lower tool, like the hardness and dimensions, and the influence of the sheet thickness, which also interacts with the soft tool deformation. The experimental research was focused on the relation between the machine control parameters and the most

  7. Management Tools in Engineering Education.

    ERIC Educational Resources Information Center

    Fehr, M.

    1999-01-01

    Describes a teaching model that applies management tools such as delegation, total quality management, time management, teamwork, and Deming rules. Promotes the advantages of efficiency, reporting, independent scheduling, and quality. (SK)

  8. Environmental Tools and Radiological Assessment

    EPA Science Inventory

    This presentation details two tools (SADA and FRAMES) available for use in environmental assessments of chemicals that can also be used for radiological assessments of the environment. Spatial Analysis and Decision Assistance (SADA) is a Windows freeware program that incorporate...

  9. Tool for reading psychrometric charts

    NASA Technical Reports Server (NTRS)

    De Angelo, F. T.

    1969-01-01

    Three-legged, clear plastic tool is designed so that the angles of each leg correspond with the angles of psychometric chart construction for each of the three required scales. The appropriate edges are tapered to the chart surface.

  10. Tool for Taking Clay Impressions

    NASA Technical Reports Server (NTRS)

    Duncan, R. S.

    1984-01-01

    Clay impression of small parts taken with tool consisting of hollow tube closed at one end. Slots at other end admit part short distance into tube. Impression used to make silicone rubber mold for examination.

  11. FSSC Science Tools: Pulsar Analysis

    NASA Technical Reports Server (NTRS)

    Thompson, Dave

    2010-01-01

    This slide presentation reviews the typical pulsar analysis, giving tips for screening of the data, the use of time series analysis, and utility tools. Specific information about analyzing Vela data is reviewed.

  12. Computational Tools for Metabolic Engineering

    PubMed Central

    Copeland, Wilbert B.; Bartley, Bryan A.; Chandran, Deepak; Galdzicki, Michal; Kim, Kyung H.; Sleight, Sean C.; Maranas, Costas D.; Sauro, Herbert M.

    2012-01-01

    A great variety of software applications are now employed in the metabolic engineering field. These applications have been created to support a wide range of experimental and analysis techniques. Computational tools are utilized throughout the metabolic engineering workflow to extract and interpret relevant information from large data sets, to present complex models in a more manageable form, and to propose efficient network design strategies. In this review, we present a number of tools that can assist in modifying and understanding cellular metabolic networks. The review covers seven areas of relevance to metabolic engineers. These include metabolic reconstruction efforts, network visualization, nucleic acid and protein engineering, metabolic flux analysis, pathway prospecting, post-structural network analysis and culture optimization. The list of available tools is extensive and we can only highlight a small, representative portion of the tools from each area. PMID:22629572

  13. Toxicity Estimation Software Tool (TEST)

    EPA Science Inventory

    The Toxicity Estimation Software Tool (TEST) was developed to allow users to easily estimate the toxicity of chemicals using Quantitative Structure Activity Relationships (QSARs) methodologies. QSARs are mathematical models used to predict measures of toxicity from the physical c...

  14. Turbine Aerodynamics Design Tool Development

    NASA Technical Reports Server (NTRS)

    Huber, Frank W.; Turner, James E. (Technical Monitor)

    2001-01-01

    This paper presents the Marshal Space Flight Center Fluids Workshop on Turbine Aerodynamic design tool development. The topics include: (1) Meanline Design/Off-design Analysis; and (2) Airfoil Contour Generation and Analysis. This paper is in viewgraph form.

  15. INTEGRATION OF POLLUTION PREVENTION TOOLS

    EPA Science Inventory

    A prototype computer-based decision support system was designed to provide small businesses with an integrated pollution prevention methodology. Preliminary research involved compilation of an inventory of existing pollution prevention tools (i.e., methodologies, software, etc.),...

  16. Videos & Tools: MedlinePlus

    MedlinePlus

    ... of this page: https://medlineplus.gov/videosandcooltools.html Videos & Tools To use the sharing features on this page, please enable JavaScript. Watch health videos on topics such as anatomy, body systems, and ...

  17. Molecular tools used in agriculture

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A summary of molecular tools used for research in agriculture were presented. Examples of DNA sequencing, library preparation, use of fingerprinting for pathogens and plant crops, high throughput sequencing, whole-genome amplification, reporter genes, and other methods....

  18. MHK Research, Tools, and Methods

    SciTech Connect

    Jepsen, Richard

    2011-11-02

    Presentation from the 2011 Water Peer Review in which principal investigator discusses improved testing, analysis, and design tools needed to more accurately model operational conditions, to optimize design parameters, and predict technology viability.

  19. Quality tools in science education

    NASA Astrophysics Data System (ADS)

    Blanton, Patricia

    2002-03-01

    At a recent Science Teachers' State Convention, I attended a session called "Quality Tools in Science Education" and was introduced to an approach to classroom management and student involvement modeled after an industry practice called TQM (total quality management).

  20. Design intent tool: User guide

    SciTech Connect

    Mills, Evan; Abell, Daniel; Bell, Geoffrey; Faludi, Jeremy; Greenberg, Steve; Hitchcock, Rob; Piette, Mary Ann; Sartor, Dalei; Stum, Karl

    2002-08-23

    This database tool provides a structured approach to recording design decisions that impact a facility's design intent in areas such as energy efficiency.Owners and de signers alike can plan, monitor and verify that a facility's design intent is being met during each stage of the design process. Additionally, the Tool gives commissioning agents, facility operators and future owners and renovators an understanding of how the building and its subsystems are intended to operate, and thus track and benchmark performance.

  1. Space Station robotics planning tools

    NASA Technical Reports Server (NTRS)

    Testa, Bridget Mintz

    1992-01-01

    The concepts are described for the set of advanced Space Station Freedom (SSF) robotics planning tools for use in the Space Station Control Center (SSCC). It is also shown how planning for SSF robotics operations is an international process, and baseline concepts are indicated for that process. Current SRMS methods provide the backdrop for this SSF theater of multiple robots, long operating time-space, advanced tools, and international cooperation.

  2. Seal for fluid forming tools

    DOEpatents

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  3. Supercooled liquid water Estimation Tool

    2012-05-04

    The Cloud Supercooled liquid water Estimation Tool (SEET) is a user driven Graphical User Interface (GUI) that estimates cloud supercooled liquid water (SLW) content in terms of vertical column and total mass from Moderate resolution Imaging Supercooled liquid water Estimation Tool Spectroradiometer (MODIS) spatially derived cloud products and realistic vertical cloud parameterizations that are user defined. It also contains functions for post-processing of the resulting data in tabular and graphical form.

  4. Modern Tools for Modern Software

    SciTech Connect

    Kumfert, G; Epperly, T

    2001-10-31

    This is a proposal for a new software configure/build tool for building, maintaining, deploying, and installing software. At its completion, this new tool will replace current standard tool suites such as ''autoconf'', ''automake'', ''libtool'', and the de facto standard build tool, ''make''. This ambitious project is born out of the realization that as scientific software has grown in size and complexity over the years, the difficulty of configuring and building software has increased as well. For high performance scientific software, additional complexities often arises from the need for portability to multiple platforms (including many one-of-a-kind platforms), multilanguage implementations, use of third party libraries, and a need to adapt algorithms to the specific features of the hardware. Development of scientific software is being hampered by the quality of configuration and build tools commonly available. Inordinate amounts of time and expertise are required to develop and maintain the configure and build system for a moderately complex project. Better build and configure tools will increase developer productivity. This proposal is a first step in a process of shoring up the foundation upon which DOE software is created and used.

  5. Tool calibration system for micromachining system

    DOEpatents

    Miller, Donald M.

    1979-03-06

    A tool calibration system including a tool calibration fixture and a tool height and offset calibration insert for calibrating the position of a tool bit in a micromachining tool system. The tool calibration fixture comprises a yokelike structure having a triangular head, a cavity in the triangular head, and a port which communicates a side of the triangular head with the cavity. Yoke arms integral with the triangular head extend along each side of a tool bar and a tool head of the micromachining tool system. The yoke arms are secured to the tool bar to place the cavity around a tool bit which may be mounted to the end of the tool head. Three linear variable differential transformer's (LVDT) are adjustably mounted in the triangular head along an X axis, a Y axis, and a Z axis. The calibration insert comprises a main base which can be mounted in the tool head of the micromachining tool system in place of a tool holder and a reference projection extending from a front surface of the main base. Reference surfaces of the calibration insert and a reference surface on a tool bar standard length are used to set the three LVDT's of the calibration fixture to the tool reference position. These positions are transferred permanently to a mastering station. The tool calibration fixture is then used to transfer the tool reference position of the mastering station to the tool bit.

  6. GridTool: A surface modeling and grid generation tool

    NASA Technical Reports Server (NTRS)

    Samareh-Abolhassani, Jamshid

    1995-01-01

    GridTool is designed around the concept that the surface grids are generated on a set of bi-linear patches. This type of grid generation is quite easy to implement, and it avoids the problems associated with complex CAD surface representations and associated surface parameterizations. However, the resulting surface grids are close to but not on the original CAD surfaces. This problem can be alleviated by projecting the resulting surface grids onto the original CAD surfaces. GridTool is designed primary for unstructured grid generation systems. Currently, GridTool supports VGRID and FELISA systems, and it can be easily extended to support other unstructured grid generation systems. The data in GridTool is stored parametrically so that once the problem is set up, one can modify the surfaces and the entire set of points, curves and patches will be updated automatically. This is very useful in a multidisciplinary design and optimization process. GridTool is written entirely in ANSI 'C', the interface is based on the FORMS library, and the graphics is based on the GL library. The code has been tested successfully on IRIS workstations running IRIX4.0 and above. The memory is allocated dynamically, therefore, memory size will depend on the complexity of geometry/grid. GridTool data structure is based on a link-list structure which allows the required memory to expand and contract dynamically according to the user's data size and action. Data structure contains several types of objects such as points, curves, patches, sources and surfaces. At any given time, there is always an active object which is drawn in magenta, or in their highlighted colors as defined by the resource file which will be discussed later.

  7. Pre-Columbian monkey tools.

    PubMed

    Haslam, Michael; Luncz, Lydia V; Staff, Richard A; Bradshaw, Fiona; Ottoni, Eduardo B; Falótico, Tiago

    2016-07-11

    Stone tools reveal worldwide innovations in human behaviour over the past three million years [1]. However, the only archaeological report of pre-modern non-human animal tool use comes from three Western chimpanzee (Pan troglodytes verus) sites in Côte d'Ivoire, aged between 4.3 and 1.3 thousand years ago (kya) [2]. This anthropocentrism limits our comparative insight into the emergence and development of technology, weakening our evolutionary models [3]. Here, we apply archaeological techniques to a distinctive stone tool assemblage created by a non-human animal in the New World, the Brazilian bearded capuchin monkey (Sapajus libidinosus). Wild capuchins at Serra da Capivara National Park (SCNP) use stones to pound open defended food, including locally indigenous cashew nuts [4], and we demonstrate that this activity dates back at least 600 to 700 years. Capuchin stone hammers and anvils are therefore the oldest non-human tools known outside of Africa, opening up to scientific scrutiny questions on the origins and spread of tool use in New World monkeys, and the mechanisms - social, ecological and cognitive - that support primate technological evolution. PMID:27404235

  8. Visiting Vehicle Ground Trajectory Tool

    NASA Technical Reports Server (NTRS)

    Hamm, Dustin

    2013-01-01

    The International Space Station (ISS) Visiting Vehicle Group needed a targeting tool for vehicles that rendezvous with the ISS. The Visiting Vehicle Ground Trajectory targeting tool provides the ability to perform both realtime and planning operations for the Visiting Vehicle Group. This tool provides a highly reconfigurable base, which allows the Visiting Vehicle Group to perform their work. The application is composed of a telemetry processing function, a relative motion function, a targeting function, a vector view, and 2D/3D world map type graphics. The software tool provides the ability to plan a rendezvous trajectory for vehicles that visit the ISS. It models these relative trajectories using planned and realtime data from the vehicle. The tool monitors ongoing rendezvous trajectory relative motion, and ensures visiting vehicles stay within agreed corridors. The software provides the ability to update or re-plan a rendezvous to support contingency operations. Adding new parameters and incorporating them into the system was previously not available on-the-fly. If an unanticipated capability wasn't discovered until the vehicle was flying, there was no way to update things.

  9. Testing simple deceptive honeypot tools

    NASA Astrophysics Data System (ADS)

    Yahyaoui, Aymen; Rowe, Neil C.

    2015-05-01

    Deception can be a useful defensive technique against cyber-attacks; it has the advantage of unexpectedness to attackers and offers a variety of tactics. Honeypots are a good tool for deception. They act as decoy computers to confuse attackers and exhaust their time and resources. This work tested the effectiveness of two free honeypot tools in real networks by varying their location and virtualization, and the effects of adding more deception to them. We tested a Web honeypot tool, Glastopf and an SSH honeypot tool Kippo. We deployed the Web honeypot in both a residential network and our organization's network and as both real and virtual machines; the organization honeypot attracted more attackers starting in the third week. Results also showed that the virtual honeypots received attacks from more unique IP addresses. They also showed that adding deception to the Web honeypot, in the form of additional linked Web pages and interactive features, generated more interest by attackers. For the purpose of comparison, we used examined log files of a legitimate Web-site www.cmand.org. The traffic distributions for the Web honeypot and the legitimate Web site showed similarities (with much malicious traffic from Brazil), but the SSH honeypot was different (with much malicious traffic from China). Contrary to previous experiments where traffic to static honeypots decreased quickly, our honeypots received increasing traffic over a period of three months. It appears that both honeypot tools are useful for providing intelligence about cyber-attack methods, and that additional deception is helpful.

  10. Pre-Columbian monkey tools.

    PubMed

    Haslam, Michael; Luncz, Lydia V; Staff, Richard A; Bradshaw, Fiona; Ottoni, Eduardo B; Falótico, Tiago

    2016-07-11

    Stone tools reveal worldwide innovations in human behaviour over the past three million years [1]. However, the only archaeological report of pre-modern non-human animal tool use comes from three Western chimpanzee (Pan troglodytes verus) sites in Côte d'Ivoire, aged between 4.3 and 1.3 thousand years ago (kya) [2]. This anthropocentrism limits our comparative insight into the emergence and development of technology, weakening our evolutionary models [3]. Here, we apply archaeological techniques to a distinctive stone tool assemblage created by a non-human animal in the New World, the Brazilian bearded capuchin monkey (Sapajus libidinosus). Wild capuchins at Serra da Capivara National Park (SCNP) use stones to pound open defended food, including locally indigenous cashew nuts [4], and we demonstrate that this activity dates back at least 600 to 700 years. Capuchin stone hammers and anvils are therefore the oldest non-human tools known outside of Africa, opening up to scientific scrutiny questions on the origins and spread of tool use in New World monkeys, and the mechanisms - social, ecological and cognitive - that support primate technological evolution.

  11. Cognitive ergonomics of operational tools

    NASA Astrophysics Data System (ADS)

    Lüdeke, A.

    2012-10-01

    Control systems have become increasingly more powerful over the past decades. The availability of high data throughput and sophisticated graphical interactions has opened a variety of new possibilities. But has this helped to provide intuitive, easy to use applications to simplify the operation of modern large scale accelerator facilities? We will discuss what makes an application useful to operation and what is necessary to make a tool easy to use. We will show that even the implementation of a small number of simple application design rules can help to create ergonomic operational tools. The author is convinced that such tools do indeed help to achieve higher beam availability and better beam performance at accelerator facilities.

  12. Tubing and cable cutting tool

    NASA Technical Reports Server (NTRS)

    Mcsmith, D. D.; Richardson, J. I. (Inventor)

    1984-01-01

    A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

  13. Individualized Behavioral Health Monitoring Tool

    NASA Technical Reports Server (NTRS)

    Mollicone, Daniel

    2015-01-01

    Behavioral health risks during long-duration space exploration missions are among the most difficult to predict, detect, and mitigate. Given the anticipated extended duration of future missions and their isolated, extreme, and confined environments, there is the possibility that behavior conditions and mental disorders will develop among astronaut crew. Pulsar Informatics, Inc., has developed a health monitoring tool that provides a means to detect and address behavioral disorders and mental conditions at an early stage. The tool integrates all available behavioral measures collected during a mission to identify possible health indicator warning signs within the context of quantitatively tracked mission stressors. It is unobtrusive and requires minimal crew time and effort to train and utilize. The monitoring tool can be deployed in space analog environments for validation testing and ultimate deployment in long-duration space exploration missions.

  14. Combination drilling and skiving tool

    DOEpatents

    Stone, William J.

    1989-01-01

    A combination drilling and skiving tool including a longitudinally extending hollow skiving sleeve slidably and concentrically mounted on a right-handed twist drill. Dogs or pawls provided on the internal periphery of the skiving sleeve engage with the helical grooves of the drill. During a clockwise rotation of the tool, the drill moves downwardly and the sleeve translates upwardly, so that the drill performs a drilling operation on a workpiece. On the other hand, the drill moves upwardly and the sleeve translates downwardly, when the tool is rotated in a counter-clockwise direction, and the sleeve performs a skiving operation. The drilling and skiving operations are separate, independent and exclusive of each other.

  15. CS2SAT Desktop Tool

    2006-03-15

    The Idaho National Laboratory (INL) has developed a Control System Cyber Security Self-Assessment Tool (CS2SAT) desktop tool that provides a repeatable and systematic approach for control system users to assess the cyber security posture of their control system networks. The tool assists users in identifying the cyber security parameters of their systems and then offers security objectives, in the form of requirements, for improving the security of their specific network. Each requirement is linked tomore » a series of associated recommendations for compliance dependent upon the desired level of security protection. Each requirement is supported by links to the original standards document and recommendations are supported by links to whitepapers and other help documents. Package also includes two back-end supporting codes: CS2SAT Requirements Matrix and Control System Security Information System.« less

  16. Foundational Tools for Petascale Computing

    SciTech Connect

    Miller, Barton

    2014-05-19

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, “High-Performance Energy Applications and Systems”, SC0004061/FG02-10ER25972, UW PRJ36WV.

  17. Transformative tools for tackling tuberculosis.

    PubMed

    Gardiner, Jennifer L; Karp, Christopher L

    2015-10-19

    The world is in need of more effective approaches to controlling tuberculosis. The development of improved control strategies has been hampered by deficiencies in the tools available for detecting Mycobacterium tuberculosis and defining the dynamic consequences of the interaction of M. tuberculosis with its human host. Key needs include a highly sensitive, specific nonsputum diagnostic; biomarkers predictive of responses to therapy; correlates of risk for disease development; and host response-independent markers of M. tuberculosis infection. Tools able to sensitively detect and quantify total body M. tuberculosis burden might well be transformative across many needed use cases. Here, we review the current state of the field, paying particular attention to needed changes in experimental paradigms that would facilitate the discovery, validation, and development of such tools.

  18. Transformative tools for tackling tuberculosis

    PubMed Central

    2015-01-01

    The world is in need of more effective approaches to controlling tuberculosis. The development of improved control strategies has been hampered by deficiencies in the tools available for detecting Mycobacterium tuberculosis and defining the dynamic consequences of the interaction of M. tuberculosis with its human host. Key needs include a highly sensitive, specific nonsputum diagnostic; biomarkers predictive of responses to therapy; correlates of risk for disease development; and host response–independent markers of M. tuberculosis infection. Tools able to sensitively detect and quantify total body M. tuberculosis burden might well be transformative across many needed use cases. Here, we review the current state of the field, paying particular attention to needed changes in experimental paradigms that would facilitate the discovery, validation, and development of such tools. PMID:26458772

  19. The Project Manager's Tool Kit

    NASA Technical Reports Server (NTRS)

    Cameron, W. Scott

    2003-01-01

    Project managers are rarely described as being funny. Moreover, a good sense of humor rarely seems to be one of the deciding factors in choosing someone to be a project manager, or something that pops up as a major discussion point at an annual performance review. Perhaps this is because people think you aren't serious about your work if you laugh. I disagree with this assessment, but that's not really my point. As I talk to people either pursuing a career in project management, or broadening their assignment to include project management, I encourage them to consider what tools they need to be successful. I suggest that they consider any strength they have to be part of their Project Management (PM) Tool Kit, and being funny could be one of the tools they need.

  20. Tools for measuring surface cleanliness

    DOEpatents

    Schroder, Mark Stewart; Woodmansee, Donald Ernest; Beadie, Douglas Frank

    2002-01-01

    A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

  1. Analytic tools for information warfare

    SciTech Connect

    Vandewart, R.L.; Craft, R.L.

    1996-05-01

    Information warfare and system surety (tradeoffs between system functionality, security, safety, reliability, cost, usability) have many mechanisms in common. Sandia`s experience has shown that an information system must be assessed from a {ital system} perspective in order to adequately identify and mitigate the risks present in the system. While some tools are available to help in this work, the process is largely manual. An integrated, extensible set of assessment tools would help the surety analyst. This paper describes one approach to surety assessment used at Sandia, identifies the difficulties in this process, and proposes a set of features desirable in an automated environment to support this process.

  2. Tools Automate Spacecraft Testing, Operation

    NASA Technical Reports Server (NTRS)

    2010-01-01

    "NASA began the Small Explorer (SMEX) program to develop spacecraft to advance astrophysics and space physics. As one of the entities supporting software development at Goddard Space Flight Center, the Hammers Company Inc. (tHC Inc.), of Greenbelt, Maryland, developed the Integrated Test and Operations System to support SMEX. Later, the company received additional Small Business Innovation Research (SBIR) funding from Goddard for a tool to facilitate the development of flight software called VirtualSat. NASA uses the tools to support 15 satellites, and the aerospace industry is using them to develop science instruments, spacecraft computer systems, and navigation and control software."

  3. A survey of parallel programming tools

    NASA Technical Reports Server (NTRS)

    Cheng, Doreen Y.

    1991-01-01

    This survey examines 39 parallel programming tools. Focus is placed on those tool capabilites needed for parallel scientific programming rather than for general computer science. The tools are classified with current and future needs of Numerical Aerodynamic Simulator (NAS) in mind: existing and anticipated NAS supercomputers and workstations; operating systems; programming languages; and applications. They are divided into four categories: suggested acquisitions, tools already brought in; tools worth tracking; and tools eliminated from further consideration at this time.

  4. Tool For Making Curved Holes

    NASA Technical Reports Server (NTRS)

    Allard, Robert; Calve, Andrew; Pastreck, Edwin; Padden, Edward

    1992-01-01

    Tool for use in electrical-discharge machining (EDM) guides EDM electrode in making curved holes. Guide rod fits in slot in arm, which moves through arc. Motion drives electrode into workpiece along desired curved path. Electrode burns into workpiece while arm rotates on spindle. Discharge cuts hole of same radius of curvature.

  5. Character Toys as Psychological Tools

    ERIC Educational Resources Information Center

    Smirnova, Elena O.

    2011-01-01

    The main characteristic of children's play is its mental aspect--the fact that it is based on thoughts and feelings and not on objective reality. During imaginary play, children go beyond the limits of reality, and toys are tools that help them to do this. Children need character toys--toys that play the role of companion or partner--in the early…

  6. Global Precipitation Mission Visualization Tool

    NASA Technical Reports Server (NTRS)

    Schwaller, Mathew

    2011-01-01

    The Global Precipitation Mission (GPM) software provides graphic visualization tools that enable easy comparison of ground- and space-based radar observations. It was initially designed to compare ground radar reflectivity from operational, ground-based, S- and C-band meteorological radars with comparable measurements from the Tropical Rainfall Measuring Mission (TRMM) satellite's precipitation radar instrument. This design is also applicable to other groundbased and space-based radars, and allows both ground- and space-based radar data to be compared for validation purposes. The tool creates an operational system that routinely performs several steps. It ingests satellite radar data (precipitation radar data from TRMM) and groundbased meteorological radar data from a number of sources. Principally, the ground radar data comes from national networks of weather radars (see figure). The data ingested by the visualization tool must conform to the data formats used in GPM Validation Network Geometry-matched data product generation. The software also performs match-ups of the radar volume data for the ground- and space-based data, as well as statistical and graphical analysis (including two-dimensional graphical displays) on the match-up data. The visualization tool software is written in IDL, and can be operated either in the IDL development environment or as a stand-alone executable function.

  7. Special Issue on Authoring Tools.

    ERIC Educational Resources Information Center

    Avner, Allen

    1984-01-01

    This theme issue provides brief descriptions or reviews of specific authoring tools including the Digital, TenCORE, EASE, Courseware (Apple), and PLATO authoring systems. Articles on conceptual or practical issues emerging from extensive experience in specific settings or based on use of specific authoring systems are also presented. (MBR)

  8. COUPLER FOR TOOL AND CABLE

    DOEpatents

    Cawley, W.E.; Frantz, C.E.

    1962-02-27

    A two-part device is designed for pulling a splitting tool through a fuel tube. The device can be readily disconnected by unthreading the parts by means of a movable head carrying a transverse key which fits into a slot in the threaded part attached to the cable. (AEC)

  9. Multimedia Tools for Teaching Economics.

    ERIC Educational Resources Information Center

    Pereira-Ford, Clara V.

    1998-01-01

    Describes one professor's experience in researching the use of multimedia tools for teaching principles of economics. Provides a list of resources consulted, including universities and colleges, books, software, laserdiscs and VHS tapes, Web sites, and journal sources. Found the students generally to be receptive to the introduction of new tools…

  10. Water Quality Analysis Tool (WQAT)

    EPA Science Inventory

    The purpose of the Water Quality Analysis Tool (WQAT) software is to provide a means for analyzing and producing useful remotely sensed data products for an entire estuary, a particular point or area of interest (AOI or POI) in estuaries, or water bodies of interest where pre-pro...

  11. Usenet as a Reference Tool.

    ERIC Educational Resources Information Center

    Klassen, Tim W.

    1995-01-01

    Describes Usenet, an Internet service that provides access to computerized discussion groups, and examines how it can be used as a reference tool. Topics include subject groups, appropriate questions, exhausting local resources before posting, explaining Usenet to patrons, sending the question, and evaluating the answer. (AEF)

  12. MOPITT Search and Subset Tool

    Atmospheric Science Data Center

    2016-06-24

    article title:  MOPITT Search and Subset Tool View larger image A new and improved version of the ASDC MOPITT Search and Subset Web Application has been released. New features include: Versions 5 and 6 are now available for search and subsetting Subset output files for Version 6 data is now ...

  13. Tales, Tasks, Tools, and Talk

    ERIC Educational Resources Information Center

    McKeny, Timothy S.; Foley, Gregory D.

    2012-01-01

    The importance of a literacy-based approach to content learning, especially within elementary school grades, is not a new idea. During the past quarter-century, the use of children's literature as an effective teaching tool has gained popularity across all content areas (Thiessen 2004). The definition of literacy has expanded not only to include…

  14. International Literacy Day Tool Kit.

    ERIC Educational Resources Information Center

    2002

    This tool kit suggests various International Literacy Day activities to raise awareness of the issues of adult literacy and language learning, to connect local literacy programs with national programs, and to help achieve the National Literacy Summit goal by 2010. The kit is intended for individuals, programs, and organizations that want to call…

  15. Tools To Support Electronic Lectures.

    ERIC Educational Resources Information Center

    Barker, Philip

    1997-01-01

    Outlines the nature of electronic performance support and ways it can be used to enhance conventional lecturing. Describes the generic processes and related tools involved in creating and using electronic lectures. Concludes with a short case study of a prototype system recently created to investigate staff and student attitudes toward this…

  16. Payload Operations Support Team Tools

    NASA Technical Reports Server (NTRS)

    Askew, Bill; Barry, Matthew; Burrows, Gary; Casey, Mike; Charles, Joe; Downing, Nicholas; Jain, Monika; Leopold, Rebecca; Luty, Roger; McDill, David; Mermelstein, Scott; Morsics, Jon; Osborne, Richard; Owens, Cindy; Price, Thomas; Quaddumi, Ayman; Thompson, Jim; Walter, Patrick; Vail, Melanie; Campbell, Richard; Kelly, Mark

    2007-01-01

    Payload Operations Support Team Tools is a software system that assists in (1) development and testing of software for payloads to be flown aboard the space shuttles and (2) training of payload customers, flight controllers, and flight crews in payload operations

  17. Tools for Improving Principals' Work

    ERIC Educational Resources Information Center

    Shen, Jianping, Ed.

    2012-01-01

    The vital role of principalship in improving schools in general and enhancing student achievement in particular has been well documented. Given its importance, there is a need for tools to improve principalship, particularly ones emphasizing those dimensions associated with student achievement. Given the accountability movement, with its…

  18. Strategy Notebook; Tools For Change.

    ERIC Educational Resources Information Center

    McEver, Catherine

    A detailed analysis of 76 major heuristic strategies or processes is provided in this supplementary text to the course, Tools for Change. Each strategy is conceptualized as a pair of active verbs which represent alternative, although not necessarily opposite, approaches to problem-solving. Some examples are: a) commit-defer; b) record-recall; c)…

  19. Robotics as an Educational Tool.

    ERIC Educational Resources Information Center

    Miglino, Orazio; Lund, Henrik Hautop; Cardaci, Maurizio

    1999-01-01

    Explores a new educational application of Piaget's theories of cognitive development: the use, as a teaching tool, of physical robots conceived as artificial organisms. Reviews educational projects using real robots. Shows that the use of intelligent systems to enlarge the view of biological reality could become an integral part of curricula in…

  20. Employability Skills Assessment Tool Development

    ERIC Educational Resources Information Center

    Rasul, Mohamad Sattar; Rauf, Rose Amnah Abd; Mansor, Azlin Norhaini; Puvanasvaran, A. P.

    2012-01-01

    Research nationally and internationally found that technical graduates are lacking in employability skills. As employability skills are crucial in outcome-based education, the main goal of this research is to develop an Employability Skill Assessment Tool to help students and lecturers produce competent graduates in employability skills needed by…

  1. Language and Tools for Networkers

    ERIC Educational Resources Information Center

    Wielinga, Eelke; Vrolijk, Maarten

    2009-01-01

    The network society has a major impact on knowledge systems, and in agricultural and rural development. It has changed relationships between actors such as farmers, extension workers, researchers, policy-makers, businessmen and consumers. These changes require different language, concepts and tools compared to the time that it was thought that…

  2. Motor Origins of Tool Use

    ERIC Educational Resources Information Center

    Kahrs, Bjorn A.; Jung, Wendy P.; Lockman, Jeffrey J.

    2013-01-01

    The current study examines the developmental trajectory of banging movements and its implications for tool use development. Twenty (6- to 15-month-old) infants wore reflective markers while banging a handled cube; movements were recorded at 240 Hz. Results indicated that through the second half-year, banging movements undergo developmental changes…

  3. Developing ICALL Tools Using GATE

    ERIC Educational Resources Information Center

    Wood, Peter

    2008-01-01

    This article discusses the use of the General Architecture for Text Engineering (GATE) as a tool for the development of ICALL and NLP applications. It outlines a paradigm shift in software development, which is mainly influenced by projects such as the Free Software Foundation. It looks at standards that have been proposed to facilitate the…

  4. Multimedia: Multi-Learning Tool.

    ERIC Educational Resources Information Center

    Farmer, Lesley S. J.

    1995-01-01

    Examines facets using multimedia to enhance learning. Highlights include product linkage and customization; flexibility for lesson plans; hypermedia authoring tools; student presentations; expense; incompatible and confusing systems; high memory demands; hardware standards for Windows and Macintosh programs; and CD-ROM products. (AEF)

  5. Testing Tools for Glyphosate Resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    There are multiple tools available for testing for glyphosate resistance. Whole plant screens, whether in the field or greenhouse, should be used as an initial method to determine if a biotype is glyphosate resistant. Screening for resistance using seedling assays such as in Petri plates, sand cul...

  6. Diplomacy: Tools of the Trade.

    ERIC Educational Resources Information Center

    Soley, Mary E.; Johnson, Jacquelyn S.; Miller, Barbara

    1998-01-01

    Presents a lesson plan that introduces the concept of diplomacy and provides students with opportunities to examine the ways in which United States interests are communicated to other governments. Outlines various diplomatic tools (summits, treaties, military action, sanctions) and asks students to identify and analyze relevant current events.…

  7. The FOT tool kit concept

    NASA Technical Reports Server (NTRS)

    Fatig, Michael

    1993-01-01

    Flight operations and the preparation for it has become increasingly complex as mission complexities increase. Further, the mission model dictates that a significant increase in flight operations activities is upon us. Finally, there is a need for process improvement and economy in the operations arena. It is therefore time that we recognize flight operations as a complex process requiring a defined, structured, and life cycle approach vitally linked to space segment, ground segment, and science operations processes. With this recognition, an FOT Tool Kit consisting of six major components designed to provide tools to guide flight operations activities throughout the mission life cycle was developed. The major components of the FOT Tool Kit and the concepts behind the flight operations life cycle process as developed at NASA's GSFC for GSFC-based missions are addressed. The Tool Kit is therefore intended to increase productivity, quality, cost, and schedule performance of the flight operations tasks through the use of documented, structured methodologies; knowledge of past lessons learned and upcoming new technology; and through reuse and sharing of key products and special application programs made possible through the development of standardized key products and special program directories.

  8. VCAT: Visual Crosswalk Analysis Tool

    SciTech Connect

    Cleland, Timothy J.; Forslund, David W.; Cleland, Catherine A.

    2012-08-31

    VCAT is a knowledge modeling and analysis tool. It was synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions. Specifically, it creates visual analytic perspectives that capture intended organization structures, then overlays the serendipitous relationships that point to potential synergies within an organization or across multiple organizations.

  9. Machine Tool Operation, Course Description.

    ERIC Educational Resources Information Center

    Denny, Walter E.; Anderson, Floyd L.

    Prepared by an instructor and curriculum specialists, this course of study was designed to meet the individual needs of the dropout and/or hard-core unemployed youth by providing them skill training, related information, and supportive services knowledge in machine tool operation. The achievement level of each student is determined at entry, and…

  10. Redefining RA: The Ideal Tool

    ERIC Educational Resources Information Center

    Wyatt, Neal

    2009-01-01

    Libraries are not so unlike market giants Netflix, Amazon, and Pandora. Despite their significantly different business models and missions, they share an interest in facilitating the search for information, including what to read, view, and listen to next. Librarians, too, want their patrons to be able to use their tools to make connections among…

  11. New Technologies and Communications Tools

    ERIC Educational Resources Information Center

    Bouse, Jim

    2016-01-01

    Relationships are key to the success of everything higher education hopes to accomplish, from recruiting the next class to retaining them, guiding them to graduation, creating successful alumni, and fostering satisfied donors. Creation of those relationships can be engaged and facilitated by the technology, communications tools, and ideas…

  12. Isoperms: An Environmental Management Tool.

    ERIC Educational Resources Information Center

    Sebera, Donald K.

    A quantitative tool, the isoperm method, is described; it quantifies the effect of environmental factors of temperature (T) and percent relative humidity (%RH) on the anticipated useful life expectancy of paper-based collections. The isoperm method provides answers to questions of the expected lifetime of the collection under various temperature…

  13. Children's Scale Errors with Tools

    ERIC Educational Resources Information Center

    Casler, Krista; Eshleman, Angelica; Greene, Kimberly; Terziyan, Treysi

    2011-01-01

    Children sometimes make "scale errors," attempting to interact with tiny object replicas as though they were full size. Here, we demonstrate that instrumental tools provide special insight into the origins of scale errors and, moreover, into the broader nature of children's purpose-guided reasoning and behavior with objects. In Study 1, 1.5- to…

  14. Dynamic Hurricane Data Analysis Tool

    NASA Technical Reports Server (NTRS)

    Knosp, Brian W.; Li, Peggy; Vu, Quoc A.

    2009-01-01

    A dynamic hurricane data analysis tool allows users of the JPL Tropical Cyclone Information System (TCIS) to analyze data over a Web medium. The TCIS software is described in the previous article, Tropical Cyclone Information System (TCIS) (NPO-45748). This tool interfaces with the TCIS database to pull in data from several different atmospheric and oceanic data sets, both observed by instruments. Users can use this information to generate histograms, maps, and profile plots for specific storms. The tool also displays statistical values for the user-selected parameter for the mean, standard deviation, median, minimum, and maximum values. There is little wait time, allowing for fast data plots over date and spatial ranges. Users may also zoom-in for a closer look at a particular spatial range. This is version 1 of the software. Researchers will use the data and tools on the TCIS to understand hurricane processes, improve hurricane forecast models and identify what types of measurements the next generation of instruments will need to collect.

  15. Evaluation as a Learning Tool

    ERIC Educational Resources Information Center

    Feinstein, Osvaldo Nestor

    2012-01-01

    Evaluation of programs or projects is often perceived as a threat. This is to a great extent related to the anticipated use of evaluation for accountability, which is often prioritized at the expense of using evaluation as a learning tool. Frequently it is argued that there is a trade-off between these two evaluation functions. An alternative…

  16. Hypermedia as a Cognitive Tool.

    ERIC Educational Resources Information Center

    Pohl, Margit

    This paper reports on a study that observed students creating structured hypertext documents, and how they try to convey structural information, in order to formulate tentative guidelines/principles for the design of concept mapping tools or hypertext systems with an emphasis on the representation of structural knowledge, and to formulated…

  17. Shot Planning and Analysis Tools

    SciTech Connect

    Casey, A; Beeler, R; Conder, A; Fallejo, R; Flegel, M; Hutton, M; Jancaitis, K; Lakamsani, V; Potter, D; Reisdorf, S; Tappero, J; Whitman, P; Carr, W; Liao, Z

    2011-07-25

    Shot planning and analysis tools (SPLAT) integrate components necessary to help achieve a high over-all operational efficiency of the National Ignition Facility (NIF) by combining near and long-term shot planning, final optics demand and supply loops, target diagnostics planning, and target fabrication requirements. Currently, the SPLAT project is comprised of two primary tool suites for shot planning and optics demand. The shot planning component provides a web-based interface to selecting and building a sequence of proposed shots for the NIF. These shot sequences, or 'lanes' as they are referred to by shot planners, provide for planning both near-term shots in the Facility and long-term 'campaigns' in the months and years to come. The shot planning capabilities integrate with the Configuration Management Tool (CMT) for experiment details and the NIF calendar for availability. Future enhancements will additionally integrate with target diagnostics planning and target fabrication requirements tools. The optics demand component is built upon predictive modelling of maintenance requirements on the final optics as a result of the proposed shots assembled during shot planning. The predictive models integrate energetics from a Laser Performance Operations Model (LPOM), the status of the deployed optics as provided by the online Final Optics Inspection system, and physics-based mathematical 'rules' that predict optic flaw growth and new flaw initiations. These models are then run on an analytical cluster comprised of forty-eight Linux-based compute nodes. Results from the predictive models are used to produce decision-support reports in the areas of optics inspection planning, optics maintenance exchanges, and optics beam blocker placement advisories. Over time, the SPLAT project will evolve to provide a variety of decision-support and operation optimization tools.

  18. Challenges of NDE Simulation Tool Challenges of NDE Simulation Tool

    NASA Technical Reports Server (NTRS)

    Leckey, Cara A. C.; Juarez, Peter D.; Seebo, Jeffrey P.; Frank, Ashley L.

    2015-01-01

    Realistic nondestructive evaluation (NDE) simulation tools enable inspection optimization and predictions of inspectability for new aerospace materials and designs. NDE simulation tools may someday aid in the design and certification of advanced aerospace components; potentially shortening the time from material development to implementation by industry and government. Furthermore, modeling and simulation are expected to play a significant future role in validating the capabilities and limitations of guided wave based structural health monitoring (SHM) systems. The current state-of-the-art in ultrasonic NDE/SHM simulation cannot rapidly simulate damage detection techniques for large scale, complex geometry composite components/vehicles with realistic damage types. This paper discusses some of the challenges of model development and validation for composites, such as the level of realism and scale of simulation needed for NASA' applications. Ongoing model development work is described along with examples of model validation studies. The paper will also discuss examples of the use of simulation tools at NASA to develop new damage characterization methods, and associated challenges of validating those methods.

  19. Promising Practices in Instruction of Discovery Tools

    ERIC Educational Resources Information Center

    Buck, Stefanie; Steffy, Christina

    2013-01-01

    Libraries are continually changing to meet the needs of users; this includes implementing discovery tools, also referred to as web-scale discovery tools, to make searching library resources easier. Because these tools are so new, it is difficult to establish definitive best practices for teaching these tools; however, promising practices are…

  20. Making Tools Isn't Child's Play

    ERIC Educational Resources Information Center

    Beck, Sarah R.; Apperly, Ian A.; Chappell, Jackie; Guthrie, Carlie; Cutting, Nicola

    2011-01-01

    Tool making evidences intelligent, flexible thinking. In Experiment 1, we confirmed that 4- to 7-year-olds chose a hook tool to retrieve a bucket from a tube. In Experiment 2, 3- to 5-year-olds consistently failed to innovate a simple hook tool. Eight-year-olds performed at mature levels. In contrast, making a tool following demonstration was easy…

  1. A Tool for Managing Software Architecture Knowledge

    SciTech Connect

    Babar, Muhammad A.; Gorton, Ian

    2007-08-01

    This paper describes a tool for managing architectural knowledge and rationale. The tool has been developed to support a framework for capturing and using architectural knowledge to improve the architecture process. This paper describes the main architectural components and features of the tool. The paper also provides examples of using the tool for supporting wellknown architecture design and analysis methods.

  2. 29 CFR 1926.301 - Hand tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Hand tools. 1926.301 Section 1926.301 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Tools-Hand and Power § 1926.301 Hand tools. (a) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including adjustable, pipe,...

  3. 29 CFR 1926.301 - Hand tools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Hand tools. 1926.301 Section 1926.301 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Tools-Hand and Power § 1926.301 Hand tools. (a) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including adjustable, pipe,...

  4. 29 CFR 1926.301 - Hand tools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Hand tools. 1926.301 Section 1926.301 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Tools-Hand and Power § 1926.301 Hand tools. (a) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including adjustable, pipe,...

  5. 29 CFR 1926.301 - Hand tools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Hand tools. 1926.301 Section 1926.301 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Tools-Hand and Power § 1926.301 Hand tools. (a) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including adjustable, pipe,...

  6. Hand and power tools: A compilation

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Some hand and power tools were described. Section One describes several tools and shop techniques that may be useful in the home or commercial shop. Section Two contains descriptions of tools that are particularly applicable to industrial work, and in Section Three a number of metal working tools are presented.

  7. Machinery, equipment and tools: A compilation

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A selection of new hand tools, modifications of existing tools, and techniques developed in the course of NASA research and development project is presented. The items are presented in two sections: Power Hand Tools and Accessories, and Manual Hand Tools and Accessories.

  8. A taxonomy of automatic differentiation tools

    SciTech Connect

    Juedes, D.W. . Dept. of Computer Science)

    1991-01-01

    Many of the current automatic differentiation (AD) tools have similar characteristics. Unfortunately, the similarities between these various AD tools often cannot be easily ascertained by reading the corresponding documentation. To clarify this situation, a taxonomy of AD tools is presented. The taxonomy places AD tools into the Elemental, Extensional, Integral, Operational, and Symbolic classes. This taxonomy is used to classify twenty-nine AD tools. Each tool is examined individually with respect to the mode of differentiation used and the degree of derivatives computed. A list detailing the availability of the surveyed AD tools is provided in the Appendix. 54 refs., 3 figs., 1 tab.

  9. Calculating petal tools by using genetic algorithms.

    PubMed

    González-García, Jorge; Cordero-Dávila, Alberto; Leal-Cabrera, Irce; Robledo-Sánchez, Carlos Ignacio; Santiago-Alvarado, Agustin

    2006-08-20

    To pass from a spherical surface to a conic one, it is possible to use a petal tool or a small solid tool that is placed at different time intervals at several radial zones of the glass. Genetic algorithms are applied to calculate the angular sizes of the incomplete annular tools that make up the petal tools. We also present the desired wear results carried out with the petal tool that was designed on the basis of the dwell times of complete annular tools. These dwell times are calculated by using base functions that are generated with annular tools and by applying the genetic algorithms.

  10. Tools for Embedded Computing Systems Software

    NASA Technical Reports Server (NTRS)

    1978-01-01

    A workshop was held to assess the state of tools for embedded systems software and to determine directions for tool development. A synopsis of the talk and the key figures of each workshop presentation, together with chairmen summaries, are presented. The presentations covered four major areas: (1) tools and the software environment (development and testing); (2) tools and software requirements, design, and specification; (3) tools and language processors; and (4) tools and verification and validation (analysis and testing). The utility and contribution of existing tools and research results for the development and testing of embedded computing systems software are described and assessed.

  11. Wear mechanism of diamond coated cutting tools

    SciTech Connect

    Leyendecker, T.; Lemmer, O.; Esser, S.

    1995-12-31

    Since Diamond Coatings were introduced into the market in 1989, five years experience in industrial applications of diamond coated cutting tools enables to present an overview of tool life and wear behavior of diamond coated cutting tools due to different cutting conditions and workpiece-materials. Machining reinforced plastics, presintered ceramic compacts, aluminum alloys, metal-matrix composites and graphite, different wear behavior occurs at the cutting edges of diamond coated tools. Having a good adhesion fatigue and chemical wear of Diamond coatings determines life time of the tools. By a profound pretreatment procedure CVD Diamond coated tools can compete with conventional PCD-tools.

  12. Continuous Coordination Tools and their Evaluation

    NASA Astrophysics Data System (ADS)

    Sarma, Anita; Al-Ani, Ban; Trainer, Erik; Silva Filho, Roberto S.; da Silva, Isabella A.; Redmiles, David; van der Hoek, André

    This chapter discusses a set of co-ordination tools (the Continuous Co-ordination (CC) tool suite that includes Ariadne, Workspace Activity Viewer (WAV), Lighthouse, Palantír, and YANCEES) and details of our evaluation framework for these tools. Specifically, we discuss how we assessed the usefulness and the usability of these tools within the context of a predefined evaluation framework called DESMETDESMET . For example, for visualization tools we evaluated the suitability of the level of abstraction and the mode of displaying information of each tool. Whereas for an infrastructure tool we evaluate the effort required to implement co-ordination tools based on the given tool. We conclude with pointers on factors to consider when evaluating co-ordination tools in general.

  13. Automatic tools for system testing

    NASA Technical Reports Server (NTRS)

    Peccia, N. M.

    1993-01-01

    As spacecraft control and other space-related ground systems become increasingly complex, the effort required in testing and validation also increases. Implementation of a spacecraft control system normally involves a number of incremental deliveries. In addition kernel or general purpose software may also be involved, which must itself be considered in the integration and testing program. Tools can be used to assist this testing. These can reduce the effort required or alternatively they can ensure that for a given level of effort, a better job is done. Great benefit could be derived by automating certain types of testing (interactive software) which up to now has been performed manually at a terminal. This paper reports on an on-going study. The study examines means of automating spacecraft control system testing, evaluates relevant commercial tools and aims to prototype basic automatic testing functions.

  14. Hydraulically actuated well shifting tool

    SciTech Connect

    Roth, B.A.

    1992-10-20

    This patent describes a hydraulically actuated shifting tool for actuating a sliding member in a well tool. It comprises: a housing having a hydraulic fluid bore therein; shifting dog means positioned on the housing for movement away and toward the housing; locking dog means positioned on the housing for movement away and toward the body; shifting dog hydraulic actuating means in fluid communication with the bore for causing engagement of the shifting dogs with the sliding member; locking dog hydraulic actuating means in communication with the bore for causing engagement of the locking dogs with the locking means; and hydraulic shifting means in communication with the bore for causing relative movement between the shifting dog means and the locking dog means for shifting the sliding sleeve.

  15. Intrusion detection sensor testing tools

    SciTech Connect

    Hayward, D.R.

    1994-08-01

    Intrusion detection sensors must be frequently tested to verify that they are operational, and they must be periodically tested to verify that they are functioning at required performance levels. Concerns involving this testing can include: The significant amount of manpower required, inconsistent results due to variability in methods and personnel, exposure of personnel to hazardous environments, and difficulty in obtaining access to the areas containing some of the intrusion sensors. To address these concerns, the Department of Energy directed Sandia National Labs. to develop intrusion detection sensor testing tools. Over the past two years Sandia has developed several sensor testing tool prototypes. This paper describes the evolution of an exterior intrusion detection sensor tester and automatic data logger, and also describes various interior intrusion detection sensor test fixtures that can be remotely activated to simulate an intruder.

  16. Google Tools in the Classroom

    NASA Astrophysics Data System (ADS)

    Albee, E. M.; Koons, P. O.; Schauffler, M.; Zhu, Y.; Segee, B. E.

    2009-12-01

    The Maine Learning Technology Initiative provides every seventh and eighth grade student in the state with MacBook laptop computers. Limitless education possibilities exist with the inclusion of Google Tools and laptops as learning tools in our modern classrooms. Google Applications allow students to create documents, spreadsheets, charts, graphs, forms, and presentations and easily allows the sharing of information with their fellow classmates and teachers. These applications invite the use of inquiry and critical thinking skills, collaboration among peers, and subject integration to teach students crucial concepts. The benefits for teachers extend into the realm of using Google sites to easily create a teacher website and blog to upload classroom information and create a communication connection for parents and students as well as collaborations between the teachers and University researchers and educators. Google Applications further enhances the possibilities for learning, sharing a wealth of information, and enhancing communication inside and outside of the classroom.

  17. Simplified, inverse, ejector design tool

    NASA Technical Reports Server (NTRS)

    Dechant, Lawrence J.

    1993-01-01

    A simple lumped parameter based inverse design tool has been developed which provides flow path geometry and entrainment estimates subject to operational, acoustic, and design constraints. These constraints are manifested through specification of primary mass flow rate or ejector thrust, fully-mixed exit velocity, and static pressure matching. Fundamentally, integral forms of the conservation equations coupled with the specified design constraints are combined to yield an easily invertible linear system in terms of the flow path cross-sectional areas. Entrainment is computed by back substitution. Initial comparison with experimental and analogous one-dimensional methods show good agreement. Thus, this simple inverse design code provides an analytically based, preliminary design tool with direct application to High Speed Civil Transport (HSCT) design studies.

  18. Decision Support Methods and Tools

    NASA Technical Reports Server (NTRS)

    Green, Lawrence L.; Alexandrov, Natalia M.; Brown, Sherilyn A.; Cerro, Jeffrey A.; Gumbert, Clyde r.; Sorokach, Michael R.; Burg, Cecile M.

    2006-01-01

    This paper is one of a set of papers, developed simultaneously and presented within a single conference session, that are intended to highlight systems analysis and design capabilities within the Systems Analysis and Concepts Directorate (SACD) of the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). This paper focuses on the specific capabilities of uncertainty/risk analysis, quantification, propagation, decomposition, and management, robust/reliability design methods, and extensions of these capabilities into decision analysis methods within SACD. These disciplines are discussed together herein under the name of Decision Support Methods and Tools. Several examples are discussed which highlight the application of these methods within current or recent aerospace research at the NASA LaRC. Where applicable, commercially available, or government developed software tools are also discussed

  19. Tracking tool for frailty: ABCDEF.

    PubMed

    Amalou, Laetitia; Roca, Frédéric; François, Florent; Druesne, Laurent; Langlois, Romuald; Pesqué, Thierry; Chassagne, Philippe

    2016-09-01

    The aging population leads to psychological, medical and social reflection for optimal care of the elderly, especially characterized by a frailty state. The frailty is the cause of morbi-mortality require screening to anticipate these complications. The objective was to evaluate the statistical performance and feasibility of the tool "ABCDEF" to screen frailty defined by Fried's criteria. A prospective multicenter study including 300 ambulatory elderly consultants was conducted. ABCDEF appears feasible without major prior training or special equipment by any doctor or caregiver during an assessment in 98% of consultants. His sensitivity to detect frailty, is of 75% and specificity of 64%. The frailty tracking threshold is 3 criteria (6). Its negative predictive value is interesting because it eliminates the hypothesis of frailty in 91% of cases. This tracking tool requires, when abnormal, further geriatric assessment. It provides a standardized and normative approach to describe frailty whose frequency is high in people older than 80 and whose consequences are major.

  20. Terascale Simulation Tools and Technologies

    SciTech Connect

    Li, Xiaolin

    2007-03-09

    We report the development of front tracking method as a simulation tool and technology for the computation on several important SciDAC and SciDAC associated applications. The progress includes the extraction of an independent software library from the front tracking code, conservative front tracking, applications of front tracking to the simulation of fusion pellet injection in a magnetically confined plasma, the study of a fuel injection jet, and the study of fluid chaotic mixing, among other problems.

  1. Program Development Tools and Infrastructures

    SciTech Connect

    Schulz, M

    2012-03-12

    Exascale class machines will exhibit a new level of complexity: they will feature an unprecedented number of cores and threads, will most likely be heterogeneous and deeply hierarchical, and offer a range of new hardware techniques (such as speculative threading, transactional memory, programmable prefetching, and programmable accelerators), which all have to be utilized for an application to realize the full potential of the machine. Additionally, users will be faced with less memory per core, fixed total power budgets, and sharply reduced MTBFs. At the same time, it is expected that the complexity of applications will rise sharply for exascale systems, both to implement new science possible at exascale and to exploit the new hardware features necessary to achieve exascale performance. This is particularly true for many of the NNSA codes, which are large and often highly complex integrated simulation codes that push the limits of everything in the system including language features. To overcome these limitations and to enable users to reach exascale performance, users will expect a new generation of tools that address the bottlenecks of exascale machines, that work seamlessly with the (set of) programming models on the target machines, that scale with the machine, that provide automatic analysis capabilities, and that are flexible and modular enough to overcome the complexities and changing demands of the exascale architectures. Further, any tool must be robust enough to handle the complexity of large integrated codes while keeping the user's learning curve low. With the ASC program, in particular the CSSE (Computational Systems and Software Engineering) and CCE (Common Compute Environment) projects, we are working towards a new generation of tools that fulfill these requirements and that provide our users as well as the larger HPC community with the necessary tools, techniques, and methodologies required to make exascale performance a reality.

  2. The COMESEP SEP forecast tool

    NASA Astrophysics Data System (ADS)

    Dierckxsens, Mark; Tziotziou, Kostas; Dalla, Silvia; Patsou, Ioanna; Marsh, Mike; Crosby, Norma; Malandraki, Olga; Lygeros, Nik

    2014-05-01

    The FP7 COMESEP (COronal Mass Ejections and Solar Energetic Particles: forecasting the space weather impact) project developed tools for forecasting geomagnetic storms and solar energetic particle (SEP) radiation storms. Here we present the SEP forecast tool which provides a prediction of the probability for an SEP event to occur near Earth following the real-time observation of an X-ray flare, and estimates the most likely impact if such an event would occur. The tool has been operational on the COMESEP alert system (http://www.comesep.eu/alert) since November 2013. Alerts are provided for proton storms with E>10 MeV and E>60 MeV in the form of a risk level, combining the probability and expected impact. The predictions are based on a statistical analysis of SEP events and their parent solar activity during Solar Cycle 23. The input parameters are the flare intensity and longitude location, as well as the CME speed and width, if an observed CME can be associated with the flare. This information is also received through the COMESEP system. Alerts are based on the available information when triggered and are subsequently updated if more information becomes available. The forecast for the probability, the impact and risk level are evaluated on events from solar cycles 22 and 24. The effect of including flare location and CME parameters is also studied. The performance of the SEP forecast tool within the COMESEP alert system will be described. This work has received funding from the European Commission FP7 Project COMESEP (263252)

  3. TACT: The Action Computation Tool

    NASA Astrophysics Data System (ADS)

    Sanders, Jason L.; Binney, James

    2015-12-01

    The Action Computation Tool (TACT) tests methods for estimating actions, angles and frequencies of orbits in both axisymmetric and triaxial potentials, including general spherical potentials, analytic potentials (Isochrone and Harmonic oscillator), axisymmetric Stackel fudge, average generating function from orbit (AvGF), and others. It is written in C++; code is provided to compile the routines into a Python library. TM (ascl:1512.014) and LAPACK are required to access some features.

  4. [Robotic surgery: toy or tool?].

    PubMed

    Vallancien, Guy; Cathelineau, Xavier; Rozet, François; Barret, Eric

    2005-05-01

    Telemanipulation has been developed for industrial purposes since the 1970s. More recently, telemanipulated arms entered the operating room. This paper briefly describes the history of surgical robotics and discusses the advantages and disadvantages for both patients and surgeons. The authors advocate the development of robotic surgery, as it facilitates the training of young surgeons and can be useful during certain phases of an operation. Thus, robotic surgery is more a promising tool than a simple toy.

  5. Retractor Tool for Brain Surgery

    NASA Technical Reports Server (NTRS)

    Helms, R.; Hayes, T.

    1982-01-01

    Proposed brain-surgery tool has an octogonal fixture for positioning latex tube over incision. Eight stainless-steel wires embedded in latex extend to hold positioning fixture. Another eight are also embedded in the latex. Concentric sleeves are successively inserted into expandable latex tube. The first sleeve is placed over a solid rod. Last sleeve is a stainless-steel tube 1 inch in diameter. It is overcoated with Teflon (or equivalent) material.

  6. Time and Resource Estimation Tool

    2004-06-08

    RESTORE is a computer software tool that allows one to model a complex set of steps required to accomplish a goal (e.g., repair a ruptured natural gas pipeline and restore service to customers). However, the time necessary to complete step may be uncertain and may be affected by conditions, such as the weather, the time of day, the day of the week. Therefore, "nature" can influence which steps are taken and the time needed tomore » complete each step. In addition, the tool allows one to model the costs for each step, which also may be uncertain. RESTORE allows the user to estimate the time and cost, both of which may be uncertain, to achieve an intermediate stage of completion, as well as overall completion. The software also makes it possible to model parallel, competing groups of activities (i.e., parallel paths) so that progreSs at a ‘merge point’ can proceed before other competing activities are completed. For example, RESTORE permits one to model a workaround and a simultaneous complete repair to determine a probability distribution for the earliest time service can be restored to a critical customer. The tool identifies the ‘most active path’ through the network of tasks, which is extremely important information for assessing the most effective way to speed-up or slow-down progress. Unlike other project planning and risk analysis tools, RESTORE provides an intuitive, graphical, and object-oriented environment for structuring a model and setting its parameters.« less

  7. Numerical tools for atomistic simulations.

    SciTech Connect

    Fang, H.; Gullett, Philip Michael; Slepoy, Alexander; Horstemeyer, Mark F.; Baskes, Michael I.; Wagner, Gregory John; Li, Mo

    2004-01-01

    The final report for a Laboratory Directed Research and Development project entitled 'Parallel Atomistic Computing for Failure Analysis of Micromachines' is presented. In this project, atomistic algorithms for parallel computers were developed to assist in quantification of microstructure-property relations related to weapon micro-components. With these and other serial computing tools, we are performing atomistic simulations of various sizes, geometries, materials, and boundary conditions. These tools provide the capability to handle the different size-scale effects required to predict failure. Nonlocal continuum models have been proposed to address this problem; however, they are phenomenological in nature and are difficult to validate for micro-scale components. Our goal is to separately quantify damage nucleation, growth, and coalescence mechanisms to provide a basis for macro-scale continuum models that will be used for micromachine design. Because micro-component experiments are difficult, a systematic computational study that employs Monte Carlo methods, molecular statics, and molecular dynamics (EAM and MEAM) simulations to compute continuum quantities will provide mechanism-property relations associated with the following parameters: specimen size, number of grains, crystal orientation, strain rates, temperature, defect nearest neighbor distance, void/crack size, chemical state, and stress state. This study will quantify sizescale effects from nanometers to microns in terms of damage progression and thus potentially allow for optimized micro-machine designs that are more reliable and have higher fidelity in terms of strength. In order to accomplish this task, several atomistic methods needed to be developed and evaluated to cover the range of defects, strain rates, temperatures, and sizes that a material may see in micro-machines. Therefore we are providing a complete set of tools for large scale atomistic simulations that include pre-processing of

  8. The LLNL MPI_Tool Suite

    2013-10-25

    MPI_T is an interface for tools introduced in the 3.0 version of MPI. The interface provides mechanisms for tools to access and set performance and control variables that are exposed by an MPI implementation. We have developed an MPI_T tool suite to provide a first set of tools exploiting the new interface and to get tool writers started on the path to more sophisticated support.

  9. Power Tool Would Require Little Bracing Torque

    NASA Technical Reports Server (NTRS)

    Canniff, Joseph H.

    1995-01-01

    Proposed rotary power tool exerts required torque on workpiece, but little or no bracing torque applied to tool to keep it from turning in opposite direction. Instead, working torque neutralized by nearly equal and opposite torque generated within tool. Used easily underwater, on slippery surfaces, or in other environments in which external bracing of tool against rotation difficult or impossible. Minimizes armbreaking forces resulting from tool binding.

  10. Failure environment analysis tool applications

    NASA Technical Reports Server (NTRS)

    Pack, Ginger L.; Wadsworth, David B.

    1994-01-01

    Understanding risks and avoiding failure are daily concerns for the women and men of NASA. Although NASA's mission propels us to push the limits of technology, and though the risks are considerable, the NASA community has instilled within it, the determination to preserve the integrity of the systems upon which our mission and, our employees lives and well-being depend. One of the ways this is being done is by expanding and improving the tools used to perform risk assessment. The Failure Environment Analysis Tool (FEAT) was developed to help engineers and analysts more thoroughly and reliably conduct risk assessment and failure analysis. FEAT accomplishes this by providing answers to questions regarding what might have caused a particular failure; or, conversely, what effect the occurrence of a failure might have on an entire system. Additionally, FEAT can determine what common causes could have resulted in other combinations of failures. FEAT will even help determine the vulnerability of a system to failures, in light of reduced capability. FEAT also is useful in training personnel who must develop an understanding of particular systems. FEAT facilitates training on system behavior, by providing an automated environment in which to conduct 'what-if' evaluation. These types of analyses make FEAT a valuable tool for engineers and operations personnel in the design, analysis, and operation of NASA space systems.

  11. Failure environment analysis tool applications

    NASA Technical Reports Server (NTRS)

    Pack, Ginger L.; Wadsworth, David B.

    1993-01-01

    Understanding risks and avoiding failure are daily concerns for the women and men of NASA. Although NASA's mission propels us to push the limits of technology, and though the risks are considerable, the NASA community has instilled within, the determination to preserve the integrity of the systems upon which our mission and, our employees lives and well-being depend. One of the ways this is being done is by expanding and improving the tools used to perform risk assessment. The Failure Environment Analysis Tool (FEAT) was developed to help engineers and analysts more thoroughly and reliably conduct risk assessment and failure analysis. FEAT accomplishes this by providing answers to questions regarding what might have caused a particular failure; or, conversely, what effect the occurrence of a failure might have on an entire system. Additionally, FEAT can determine what common causes could have resulted in other combinations of failures. FEAT will even help determine the vulnerability of a system to failures, in light of reduced capability. FEAT also is useful in training personnel who must develop an understanding of particular systems. FEAT facilitates training on system behavior, by providing an automated environment in which to conduct 'what-if' evaluation. These types of analyses make FEAT a valuable tool for engineers and operations personnel in the design, analysis, and operation of NASA space systems.

  12. Software engineering methodologies and tools

    NASA Technical Reports Server (NTRS)

    Wilcox, Lawrence M.

    1993-01-01

    Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

  13. Distributed Wind Policy Comparison Tool

    SciTech Connect

    2011-12-01

    Power through Policy: 'Best Practices' for Cost-Effective Distributed Wind is a U.S. Department of Energy (DOE)-funded project to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool (Policy Tool) is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The Policy Tool can be used to evaluate the ways that a variety of federal and state policies and incentives impact the economics of distributed wind (and subsequently its expected market growth). It also allows policymakers to determine the impact of policy options, addressing market challenges identified in the U.S. DOE’s '20% Wind Energy by 2030' report and helping to meet COE targets.

  14. The SCRAM tool-kit

    NASA Astrophysics Data System (ADS)

    Tamir, David; Flanigan, Lee A.; Weeks, Jack L.; Siewert, Thomas A.; Kimbrough, Andrew G.; McClure, Sidney R.

    1994-01-01

    This paper proposes a new series of on-orbit capabilities to support the near-term Hubble Space Telescope, Extended Duration Orbiter, Long Duration Orbiter, Space Station Freedom, other orbital platforms, and even the future manned Lunar/Mars missions. These proposed capabilities form a toolkit termed Space Construction, Repair, and Maintenance (SCRAM). SCRAM addresses both intra-Vehicular Activity (IVA) and Extra-Vehicular Activity (EVA) needs. SCRAM provides a variety of tools which enable welding, brazing, cutting, coating, heating, and cleaning, as well as corresponding nondestructive examination. Near-term IVA-SCRAM applications include repair and modification to fluid lines, structure, and laboratory equipment inside a shirt-sleeve environment (i.e. inside Spacelab or Space Station). Near-term EVA-SCRAM applications include construction of fluid lines and structural members, repair of punctures by orbital debris, refurbishment of surfaces eroded by contaminants. The SCRAM tool-kit also promises future EVA applications involving mass production tasks automated by robotics and artificial intelligence, for construction of large truss, aerobrake, and nuclear reactor shadow shields structures. The leading candidate tool processes for SCRAM, currently undergoing research and development, include Electron Beam, Gas Tungsten Arc, Plasma Arc, and Laser Beam. A series of strategic space flight experiments would make SCRAM available to help conquer the space frontier.

  15. Grid Stiffened Structure Analysis Tool

    NASA Technical Reports Server (NTRS)

    1999-01-01

    The Grid Stiffened Analysis Tool contract is contract performed by Boeing under NASA purchase order H30249D. The contract calls for a "best effort" study comprised of two tasks: (1) Create documentation for a composite grid-stiffened structure analysis tool, in the form of a Microsoft EXCEL spread sheet, that was developed by originally at Stanford University and later further developed by the Air Force, and (2) Write a program that functions as a NASTRAN pre-processor to generate an FEM code for grid-stiffened structure. In performing this contract, Task 1 was given higher priority because it enables NASA to make efficient use of a unique tool they already have; Task 2 was proposed by Boeing because it also would be beneficial to the analysis of composite grid-stiffened structures, specifically in generating models for preliminary design studies. The contract is now complete, this package includes copies of the user's documentation for Task 1 and a CD ROM & diskette with an electronic copy of the user's documentation and an updated version of the "GRID 99" spreadsheet.

  16. Computational tools for protein modeling.

    PubMed

    Xu, D; Xu, Y; Uberbacher, E C

    2000-07-01

    Protein modeling is playing a more and more important role in protein and peptide sciences due to improvements in modeling methods, advances in computer technology, and the huge amount of biological data becoming available. Modeling tools can often predict the structure and shed some light on the function and its underlying mechanism. They can also provide insight to design experiments and suggest possible leads for drug design. This review attempts to provide a comprehensive introduction to major computer programs, especially on-line servers, for protein modeling. The review covers the following aspects: (1) protein sequence comparison, including sequence alignment/search, sequence-based protein family classification, domain parsing, and phylogenetic classification; (2) sequence annotation, including annotation/prediction of hydrophobic profiles, transmembrane regions, active sites, signaling sites, and secondary structures; (3) protein structure analysis, including visualization, geometry analysis, structure comparison/classification, dynamics, and electrostatics; (4) three-dimensional structure prediction, including homology modeling, fold recognition using threading, ab initio prediction, and docking. We will address what a user can expect from the computer tools in terms of their strengths and limitations. We will also discuss the major challenges and the future trends in the field. A collection of the links of tools can be found at http://compbio.ornl.gov/structure/resource/.

  17. New diagnostic tools in schistosomiasis.

    PubMed

    Utzinger, J; Becker, S L; van Lieshout, L; van Dam, G J; Knopp, S

    2015-06-01

    Schistosomiasis is a water-based parasitic disease that affects over 250 million people. Control efforts have long been in vain, which is one reason why schistosomiasis is considered a neglected tropical disease. However, since the new millennium, interventions against schistosomiasis are escalating. The initial impetus stems from a 2001 World Health Assembly resolution, urging member states to scale-up deworming of school-aged children with the anthelminthic drug praziquantel. Because praziquantel is safe, efficacious and inexpensive when delivered through the school platform, diagnosis before drug intervention was deemed unnecessary and not cost-effective. Hence, there was little interest in research and development of novel diagnostic tools. With the recent publication of the World Health Organization (WHO) Roadmap to overcome the impact of neglected tropical diseases in 2020, we have entered a new era. Elimination of schistosomiasis has become the buzzword and this has important ramifications for diagnostic tools. Indeed, measuring progress towards the WHO Roadmap and whether local elimination has been achieved requires highly accurate diagnostic assays. Here, we introduce target product profiles for diagnostic tools that are required for different stages of a schistosomiasis control programme. We provide an update of the latest developments in schistosomiasis diagnosis, including microscopic techniques, rapid diagnostic tests for antigen detection, polymerase chain reaction (PCR) assays and proxy markers for morbidity assessments. Particular emphasis is placed on challenges and solutions for new technologies to enter clinical practice.

  18. Revolutions in Neuroscience: Tool Development.

    PubMed

    Bickle, John

    2016-01-01

    Thomas Kuhn's famous model of the components and dynamics of scientific revolutions is still dominant to this day across science, philosophy, and history. The guiding philosophical theme of this article is that, concerning actual revolutions in neuroscience over the past 60 years, Kuhn's account is wrong. There have been revolutions, and new ones are brewing, but they do not turn on competing paradigms, anomalies, or the like. Instead, they turn exclusively on the development of new experimental tools. I adopt a metascientific approach and examine in detail the development of two recent neuroscience revolutions: the impact of engineered genetically mutated mammals in the search for causal mechanisms of "higher" cognitive functions; and the more recent impact of optogenetics and designer receptors exclusively activated by designer drugs (DREADDs). The two key metascientific concepts, I derive from these case studies are a revolutionary new tool's motivating problem, and its initial and second-phase hook experiments. These concepts hardly exhaust a detailed metascience of tool development experiments in neuroscience, but they get that project off to a useful start and distinguish the subsequent account of neuroscience revolutions clearly from Kuhn's famous model. I close with a brief remark about the general importance of molecular biology for a current philosophical understanding of science, as comparable to the place physics occupied when Kuhn formulated his famous theory of scientific revolutions. PMID:27013992

  19. Advanced cryogenics for cutting tools. Final report

    SciTech Connect

    Lazarus, L.J.

    1996-10-01

    The purpose of the investigation was to determine if cryogenic treatment improved the life and cost effectiveness of perishable cutting tools over other treatments or coatings. Test results showed that in five of seven of the perishable cutting tools tested there was no improvement in tool life. The other two tools showed a small gain in tool life, but not as much as when switching manufacturers of the cutting tool. The following conclusions were drawn from this study: (1) titanium nitride coatings are more effective than cryogenic treatment in increasing the life of perishable cutting tools made from all cutting tool materials, (2) cryogenic treatment may increase tool life if the cutting tool is improperly heat treated during its origination, and (3) cryogenic treatment was only effective on those tools made from less sophisticated high speed tool steels. As a part of a recent detailed investigation, four cutting tool manufacturers and two cutting tool laboratories were queried and none could supply any data to substantiate cryogenic treatment of perishable cutting tools.

  20. Software Tools Streamline Project Management

    NASA Technical Reports Server (NTRS)

    2009-01-01

    Three innovative software inventions from Ames Research Center (NETMARK, Program Management Tool, and Query-Based Document Management) are finding their way into NASA missions as well as industry applications. The first, NETMARK, is a program that enables integrated searching of data stored in a variety of databases and documents, meaning that users no longer have to look in several places for related information. NETMARK allows users to search and query information across all of these sources in one step. This cross-cutting capability in information analysis has exponentially reduced the amount of time needed to mine data from days or weeks to mere seconds. NETMARK has been used widely throughout NASA, enabling this automatic integration of information across many documents and databases. NASA projects that use NETMARK include the internal reporting system and project performance dashboard, Erasmus, NASA s enterprise management tool, which enhances organizational collaboration and information sharing through document routing and review; the Integrated Financial Management Program; International Space Station Knowledge Management; Mishap and Anomaly Information Reporting System; and management of the Mars Exploration Rovers. Approximately $1 billion worth of NASA s projects are currently managed using Program Management Tool (PMT), which is based on NETMARK. PMT is a comprehensive, Web-enabled application tool used to assist program and project managers within NASA enterprises in monitoring, disseminating, and tracking the progress of program and project milestones and other relevant resources. The PMT consists of an integrated knowledge repository built upon advanced enterprise-wide database integration techniques and the latest Web-enabled technologies. The current system is in a pilot operational mode allowing users to automatically manage, track, define, update, and view customizable milestone objectives and goals. The third software invention, Query

  1. Integrated Wind Power Planning Tool

    NASA Astrophysics Data System (ADS)

    Rosgaard, Martin; Giebel, Gregor; Skov Nielsen, Torben; Hahmann, Andrea; Sørensen, Poul; Madsen, Henrik

    2013-04-01

    This poster presents the current state of the public service obligation (PSO) funded project PSO 10464, with the title "Integrated Wind Power Planning Tool". The goal is to integrate a mesoscale numerical weather prediction (NWP) model with purely statistical tools in order to assess wind power fluctuations, with focus on long term power system planning for future wind farms as well as short term forecasting for existing wind farms. Currently, wind power fluctuation models are either purely statistical or integrated with NWP models of limited resolution. Using the state-of-the-art mesoscale NWP model Weather Research & Forecasting model (WRF) the forecast error is sought quantified in dependence of the time scale involved. This task constitutes a preparative study for later implementation of features accounting for NWP forecast errors in the DTU Wind Energy maintained Corwind code - a long term wind power planning tool. Within the framework of PSO 10464 research related to operational short term wind power prediction will be carried out, including a comparison of forecast quality at different mesoscale NWP model resolutions and development of a statistical wind power prediction tool taking input from WRF. The short term prediction part of the project is carried out in collaboration with ENFOR A/S; a Danish company that specialises in forecasting and optimisation for the energy sector. The integrated prediction model will allow for the description of the expected variability in wind power production in the coming hours to days, accounting for its spatio-temporal dependencies, and depending on the prevailing weather conditions defined by the WRF output. The output from the integrated short term prediction tool constitutes scenario forecasts for the coming period, which can then be fed into any type of system model or decision making problem to be solved. The high resolution of the WRF results loaded into the integrated prediction model will ensure a high accuracy

  2. Integrated Wind Power Planning Tool

    NASA Astrophysics Data System (ADS)

    Rosgaard, M. H.; Giebel, G.; Nielsen, T. S.; Hahmann, A.; Sørensen, P.; Madsen, H.

    2012-04-01

    This poster presents the current state of the public service obligation (PSO) funded project PSO 10464, with the working title "Integrated Wind Power Planning Tool". The project commenced October 1, 2011, and the goal is to integrate a numerical weather prediction (NWP) model with purely statistical tools in order to assess wind power fluctuations, with focus on long term power system planning for future wind farms as well as short term forecasting for existing wind farms. Currently, wind power fluctuation models are either purely statistical or integrated with NWP models of limited resolution. With regard to the latter, one such simulation tool has been developed at the Wind Energy Division, Risø DTU, intended for long term power system planning. As part of the PSO project the inferior NWP model used at present will be replaced by the state-of-the-art Weather Research & Forecasting (WRF) model. Furthermore, the integrated simulation tool will be improved so it can handle simultaneously 10-50 times more turbines than the present ~ 300, as well as additional atmospheric parameters will be included in the model. The WRF data will also be input for a statistical short term prediction model to be developed in collaboration with ENFOR A/S; a danish company that specialises in forecasting and optimisation for the energy sector. This integrated prediction model will allow for the description of the expected variability in wind power production in the coming hours to days, accounting for its spatio-temporal dependencies, and depending on the prevailing weather conditions defined by the WRF output. The output from the integrated prediction tool constitute scenario forecasts for the coming period, which can then be fed into any type of system model or decision making problem to be solved. The high resolution of the WRF results loaded into the integrated prediction model will ensure a high accuracy data basis is available for use in the decision making process of the Danish

  3. System analysis: Developing tools for the future

    SciTech Connect

    De Jong, K.; clever, J.; Draper, J.V.; Davies, B.; Lonks, A.

    1996-02-01

    This report introduces and evaluates system analysis tools that were developed, or are under development, for the Robotics Technology Development Program (RTDP). Additionally, it discusses system analysis work completed using these tools aimed at completing a system analysis of the retrieval of waste from underground storage tanks on the Hanford Reservation near Richland, Washington. The tools developed and evaluated include a mixture of commercially available tools adapted to RTDP requirements, and some tools developed in house. The tools that are included in this report include: a Process Diagramming Tool, a Cost Modeling Tool, an Amortization Modeling Tool, a graphical simulation linked to the Cost Modeling Tool, a decision assistance tool, and a system thinking tool. Additionally, the importance of performance testing to the RTDP and the results of such testing executed is discussed. Further, the results of the Tank Waste Retrieval (TWR) System Diagram, the TWR Operations Cost Model, and the TWR Amortization Model are presented, and the implication of the results are discussed. Finally, the RTDP system analysis tools are assessed and some recommendations are made regarding continuing development of the tools and process.

  4. Data Mining and Optimization Tools for Developing Engine Parameters Tools

    NASA Technical Reports Server (NTRS)

    Dhawan, Atam P.

    1998-01-01

    This project was awarded for understanding the problem and developing a plan for Data Mining tools for use in designing and implementing an Engine Condition Monitoring System. Tricia Erhardt and I studied the problem domain for developing an Engine Condition Monitoring system using the sparse and non-standardized datasets to be available through a consortium at NASA Lewis Research Center. We visited NASA three times to discuss additional issues related to dataset which was not made available to us. We discussed and developed a general framework of data mining and optimization tools to extract useful information from sparse and non-standard datasets. These discussions lead to the training of Tricia Erhardt to develop Genetic Algorithm based search programs which were written in C++ and used to demonstrate the capability of GA algorithm in searching an optimal solution in noisy, datasets. From the study and discussion with NASA LeRC personnel, we then prepared a proposal, which is being submitted to NASA for future work for the development of data mining algorithms for engine conditional monitoring. The proposed set of algorithm uses wavelet processing for creating multi-resolution pyramid of tile data for GA based multi-resolution optimal search.

  5. Basic Hand Tools for Bricklaying and Cement Masonry [and] Basic Hand Tools of the Carpenter.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    Intended for student use, this unit discusses and illustrates the tools used in brick and masonry and carpentry. Contents of the brick and masonry section include informative materials on bricklaying tools (brick trowels, joint tools, levels, squares, line and accessories, rules, hammers and chisels, tool kits) and cement masonry tools (tampers,…

  6. EVALUATING ENVIRONMENTAL DECISION SUPPORT TOOLS.

    SciTech Connect

    SULLIVAN, T.

    2004-10-01

    Effective contaminated land management requires a number of decisions addressing a suite of technical, economic, and social concerns. These concerns include human health risks, ecological risks, economic costs, technical feasibility of proposed remedial actions, and the value society places on clean-up and re-use of formerly contaminated lands. Decision making, in the face of uncertainty and multiple and often conflicting objectives, is a vital and challenging role in environmental management that affects a significant economic activity. Although each environmental remediation problem is unique and requires a site-specific analysis, many of the key decisions are similar in structure. This has led many to attempt to develop standard approaches. As part of the standardization process, attempts have been made to codify specialist expertise into decision support tools. This activity is intended to facilitate reproducible and transparent decision making. The process of codifying procedures has also been found to be a useful activity for establishing and rationalizing management processes. This study will have two primary objectives. The first is to develop taxonomy for Decision Support Tools (DST) to provide a framework for understanding the different tools and what they are designed to address in the context of environmental remediation problems. The taxonomy will have a series of subject areas for the DST. From these subjects, a few key areas will be selected for further study and software in these areas will be identified. The second objective, will be to review the existing DST in the selected areas and develop a screening matrix for each software product.

  7. Tool for Crimping Flexible Circuit Leads

    NASA Technical Reports Server (NTRS)

    Hulse, Aaron; Diftler, Myron A.

    2009-01-01

    A hand tool has been developed for crimping leads in flexible tails that are parts of some electronic circuits -- especially some sensor circuits. The tool is used to cut the tails to desired lengths and attach solder tabs to the leads. For tailoring small numbers of circuits for special applications, this hand tool is a less expensive alternative to a commercially available automated crimping tool. The crimping tool consists of an off-the-shelf hand crimping tool plus a specialized crimping insert designed specifically for the intended application.

  8. HDF-EOS Dump Tools

    NASA Astrophysics Data System (ADS)

    Prasad, U.; Rahabi, A.

    2001-05-01

    The following utilities developed for HDF-EOS format data dump are of special use for Earth science data for NASA's Earth Observation System (EOS). This poster demonstrates their use and application. The first four tools take HDF-EOS data files as input. HDF-EOS Metadata Dumper - metadmp Metadata dumper extracts metadata from EOS data granules. It operates by simply copying blocks of metadata from the file to the standard output. It does not process the metadata in any way. Since all metadata in EOS granules is encoded in the Object Description Language (ODL), the output of metadmp will be in the form of complete ODL statements. EOS data granules may contain up to three different sets of metadata (Core, Archive, and Structural Metadata). HDF-EOS Contents Dumper - heosls Heosls dumper displays the contents of HDF-EOS files. This utility provides detailed information on the POINT, SWATH, and GRID data sets. in the files. For example: it will list, the Geo-location fields, Data fields and objects. HDF-EOS ASCII Dumper - asciidmp The ASCII dump utility extracts fields from EOS data granules into plain ASCII text. The output from asciidmp should be easily human readable. With minor editing, asciidmp's output can be made ingestible by any application with ASCII import capabilities. HDF-EOS Binary Dumper - bindmp The binary dumper utility dumps HDF-EOS objects in binary format. This is useful for feeding the output of it into existing program, which does not understand HDF, for example: custom software and COTS products. HDF-EOS User Friendly Metadata - UFM The UFM utility tool is useful for viewing ECS metadata. UFM takes an EOSDIS ODL metadata file and produces an HTML report of the metadata for display using a web browser. HDF-EOS METCHECK - METCHECK METCHECK can be invoked from either Unix or Dos environment with a set of command line options that a user might use to direct the tool inputs and output . METCHECK validates the inventory metadata in (.met file) using The

  9. Alignment Tool For Inertia Welding

    NASA Technical Reports Server (NTRS)

    Snyder, Gary L.

    1991-01-01

    Compact, easy-to-use tool aligns drive bar of inertia welder over hole in stub. Ensures drive bar concentric to hole within 0.002 in. (0.051 mm.). Holds two batteries and light bulb. Electrical circuit completed, providing current to bulb when pin in contact with post. When pin centered in post hole, it does not touch post, and lamp turns off. Built for use in making repair welds on liquid-oxygen-injector posts in Space Shuttle main engine. Version having suitably modified dimensions used to facilitate alignment in other forests of post.

  10. New tools in pulmonary rehabilitation.

    PubMed

    Wijkstra, P J; Wempe, J B

    2011-12-01

    In patients with more severe chronic obstructive pulmonary disease (COPD), the benefits of rehabilitation might not be clear and, therefore, new treatment options have been developed to increase the benefits of rehabilitation. This review provides an overview of new approaches being developed as an addition to exercise training. In turn, the benefits of adding ventilatory support, oxygen, anabolics or neuromuscular stimulation to a rehabilitation programme will be discussed. While positive benefits for a number of these approaches have been found, many questions remain unsolved. Therefore, at present, we cannot recommend these new tools as part of the routine management of patients with COPD who start a rehabilitation programme. PMID:21828026

  11. The Xygra gun simulation tool.

    SciTech Connect

    Garasi, Christopher Joseph; Lamppa, Derek C.; Aubuchon, Matthew S.; Shirley, David Noyes; Robinson, Allen Conrad; Russo, Thomas V.

    2008-12-01

    Inductive electromagnetic launchers, or coilguns, use discrete solenoidal coils to accelerate a coaxial conductive armature. To date, Sandia has been using an internally developed code, SLINGSHOT, as a point-mass lumped circuit element simulation tool for modeling coilgun behavior for design and verification purposes. This code has shortcomings in terms of accurately modeling gun performance under stressful electromagnetic propulsion environments. To correct for these limitations, it was decided to attempt to closely couple two Sandia simulation codes, Xyce and ALEGRA, to develop a more rigorous simulation capability for demanding launch applications. This report summarizes the modifications made to each respective code and the path forward to completing interfacing between them.

  12. New direction in CAD tools

    NASA Technical Reports Server (NTRS)

    Peterson, S.

    1990-01-01

    Chip and software development communities are concerned with the runaway pace of chip development and the monumental problems which can quickly accumulate and overwhelm those charged with the task of IC development. This 'weight' must be transferred from the shoulders of the human developers to the software tools which assimilate and control the defining data of the development process. This paper details many of the problems which are being resolved by reviewing the obstacles and resultant advancements which the industry has made. Specifically, it will describe many of the things which are being done in one company to provide this much-needed relief.

  13. Apes produce tools for future use.

    PubMed

    Bräuer, Juliane; Call, Josep

    2015-03-01

    There is now growing evidence that some animal species are able to plan for the future. For example great apes save and exchange tools for future use. Here we raise the question whether chimpanzees, orangutans, and bonobos would produce tools for future use. Subjects only had access to a baited apparatus for a limited duration and therefore should use the time preceding this access to create the appropriate tools in order to get the rewards. The apes were tested in three conditions depending on the need for pre-prepared tools. Either eight tools, one tool or no tools were needed to retrieve the reward. The apes prepared tools in advance for future use and they produced them mainly in conditions when they were really needed. The fact that apes were able to solve this new task indicates that their planning skills are flexible. However, for the condition in which eight tools were needed, apes produced less than two tools per trial in advance. However, they used their chance to produce additional tools in the tool use phase-thus often obtaining most of the reward from the apparatus. Increased pressure to prepare more tools in advance did not have an effect on their performance.

  14. Apes produce tools for future use.

    PubMed

    Bräuer, Juliane; Call, Josep

    2015-03-01

    There is now growing evidence that some animal species are able to plan for the future. For example great apes save and exchange tools for future use. Here we raise the question whether chimpanzees, orangutans, and bonobos would produce tools for future use. Subjects only had access to a baited apparatus for a limited duration and therefore should use the time preceding this access to create the appropriate tools in order to get the rewards. The apes were tested in three conditions depending on the need for pre-prepared tools. Either eight tools, one tool or no tools were needed to retrieve the reward. The apes prepared tools in advance for future use and they produced them mainly in conditions when they were really needed. The fact that apes were able to solve this new task indicates that their planning skills are flexible. However, for the condition in which eight tools were needed, apes produced less than two tools per trial in advance. However, they used their chance to produce additional tools in the tool use phase-thus often obtaining most of the reward from the apparatus. Increased pressure to prepare more tools in advance did not have an effect on their performance. PMID:25236323

  15. Programming Tools: Status, Evaluation, and Comparison

    NASA Technical Reports Server (NTRS)

    Cheng, Doreen Y.; Cooper, D. M. (Technical Monitor)

    1994-01-01

    In this tutorial I will first describe the characteristics of scientific applications and their developers, and describe the computing environment in a typical high-performance computing center. I will define the user requirements for tools that support application portability and present the difficulties to satisfy them. These form the basis of the evaluation and comparison of the tools. I will then describe the tools available in the market and the tools available in the public domain. Specifically, I will describe the tools for converting sequential programs, tools for developing portable new programs, tools for debugging and performance tuning, tools for partitioning and mapping, and tools for managing network of resources. I will introduce the main goals and approaches of the tools, and show main features of a few tools in each category. Meanwhile, I will compare tool usability for real-world application development and compare their different technological approaches. Finally, I will indicate the future directions of the tools in each category.

  16. Tools for Anopheles gambiae Transgenesis.

    PubMed

    Volohonsky, Gloria; Terenzi, Olivier; Soichot, Julien; Naujoks, Daniel A; Nolan, Tony; Windbichler, Nikolai; Kapps, Delphine; Smidler, Andrea L; Vittu, Anaïs; Costa, Giulia; Steinert, Stefanie; Levashina, Elena A; Blandin, Stéphanie A; Marois, Eric

    2015-06-01

    Transgenesis is an essential tool to investigate gene function and to introduce desired characters in laboratory organisms. Setting-up transgenesis in non-model organisms is challenging due to the diversity of biological life traits and due to knowledge gaps in genomic information. Some procedures will be broadly applicable to many organisms, and others have to be specifically developed for the target species. Transgenesis in disease vector mosquitoes has existed since the 2000s but has remained limited by the delicate biology of these insects. Here, we report a compilation of the transgenesis tools that we have designed for the malaria vector Anopheles gambiae, including new docking strains, convenient transgenesis plasmids, a puromycin resistance selection marker, mosquitoes expressing cre recombinase, and various reporter lines defining the activity of cloned promoters. This toolbox contributed to rendering transgenesis routine in this species and is now enabling the development of increasingly refined genetic manipulations such as targeted mutagenesis. Some of the reagents and procedures reported here are easily transferable to other nonmodel species, including other disease vector or agricultural pest insects.

  17. Plasmids as Tools for Containment.

    PubMed

    García, José L; Díaz, Eduardo

    2014-10-01

    Active containment systems are a major tool for reducing the uncertainty associated with the introduction of monocultures, genetically engineered or not, into target habitats for a large number of biotechnological applications (e.g., bioremediation, bioleaching, biopesticides, biofuels, biotransformations, live vaccines, etc.). While biological containment reduces the survival of the introduced organism outside the target habitat and/or upon completion of the projected task, gene containment strategies reduce the lateral spread of the key genetic determinants to indigenous microorganisms. In fundamental research, suicide circuits become relevant tools to address the role of gene transfer, mainly plasmid transfer, in evolution and how this transfer contributes to genome plasticity and to the rapid adaptation of microbial communities to environmental changes. Many lethal functions and regulatory circuits have been used and combined to design efficient containment systems. As many new genomes are being sequenced, novel lethal genes and regulatory elements are available, e.g., new toxin-antitoxin modules, and they could be used to increase further the current containment efficiencies and to expand containment to other organisms. Although the current containment systems can increase the predictability of genetically modified organisms in the environment, containment will never be absolute, due to the existence of mutations that lead to the appearance of surviving subpopulations. In this sense, orthogonal systems (xenobiology) appear to be the solution for setting a functional genetic firewall that will allow absolute containment of recombinant organisms. PMID:26104372

  18. Observatory Bibliographies as Research Tools

    NASA Astrophysics Data System (ADS)

    Rots, Arnold H.; Winkelman, S. L.

    2013-01-01

    Traditionally, observatory bibliographies were maintained to provide insight in how successful a observatory is as measured by its prominence in the (refereed) literature. When we set up the bibliographic database for the Chandra X-ray Observatory (http://cxc.harvard.edu/cgi-gen/cda/bibliography) as part of the Chandra Data Archive ((http://cxc.harvard.edu/cda/), very early in the mission, our objective was to make it primarily a useful tool for our user community. To achieve this we are: (1) casting a very wide net in collecting Chandra-related publications; (2) including for each literature reference in the database a wealth of metadata that is useful for the users; and (3) providing specific links between the articles and the datasets in the archive that they use. As a result our users are able to browse the literature and the data archive simultaneously. As an added bonus, the rich metadata content and data links have also allowed us to assemble more meaningful statistics about the scientific efficacy of the observatory. In all this we collaborate closely with the Astrophysics Data System (ADS). Among the plans for future enhancement are the inclusion of press releases and the Chandra image gallery, linking with ADS semantic searching tools, full-text metadata mining, and linking with other observatories' bibliographies. This work is supported by NASA contract NAS8-03060 (CXC) and depends critically on the services provided by the ADS.

  19. Evaluation of distributed computing tools

    SciTech Connect

    Stanberry, L.

    1992-10-28

    The original goal stated in the collaboration agreement from LCC`s perspective was ``to show that networking tools available in UNICOS perform well enough to meet the requirements of LCC customers.`` This translated into evaluating how easy it was to port ELROS over CRI`s ISO 2.0, which itself is a port of ISODE to the Cray. In addition we tested the interoperability of ELROS and ISO 2.0 programs running on the Cray, and communicating with each other, and with servers or clients running on other machines. To achieve these goals from LCC`s side, we ported ELROS to the Cray, and also obtained and installed a copy of the ISO 2.0 distribution from CRI. CRI`s goal for the collaboration was to evaluate the usability of ELROS. In particular, we were interested in their potential feedback on the use of ELROS in implementing ISO protocols--whether ELROS would be easter to use and perform better than other tools that form part of the standard ISODE system. To help achieve these goals for CRI, we provided them with a distribution tar file containing the ELROS system, once we had completed our port of ELROS to the Cray.

  20. Evaluation of distributed computing tools

    SciTech Connect

    Stanberry, L.

    1992-10-28

    The original goal stated in the collaboration agreement from LCC's perspective was to show that networking tools available in UNICOS perform well enough to meet the requirements of LCC customers.'' This translated into evaluating how easy it was to port ELROS over CRI's ISO 2.0, which itself is a port of ISODE to the Cray. In addition we tested the interoperability of ELROS and ISO 2.0 programs running on the Cray, and communicating with each other, and with servers or clients running on other machines. To achieve these goals from LCC's side, we ported ELROS to the Cray, and also obtained and installed a copy of the ISO 2.0 distribution from CRI. CRI's goal for the collaboration was to evaluate the usability of ELROS. In particular, we were interested in their potential feedback on the use of ELROS in implementing ISO protocols--whether ELROS would be easter to use and perform better than other tools that form part of the standard ISODE system. To help achieve these goals for CRI, we provided them with a distribution tar file containing the ELROS system, once we had completed our port of ELROS to the Cray.

  1. Revolutions in Neuroscience: Tool Development

    PubMed Central

    Bickle, John

    2016-01-01

    Thomas Kuhn’s famous model of the components and dynamics of scientific revolutions is still dominant to this day across science, philosophy, and history. The guiding philosophical theme of this article is that, concerning actual revolutions in neuroscience over the past 60 years, Kuhn’s account is wrong. There have been revolutions, and new ones are brewing, but they do not turn on competing paradigms, anomalies, or the like. Instead, they turn exclusively on the development of new experimental tools. I adopt a metascientific approach and examine in detail the development of two recent neuroscience revolutions: the impact of engineered genetically mutated mammals in the search for causal mechanisms of “higher” cognitive functions; and the more recent impact of optogenetics and designer receptors exclusively activated by designer drugs (DREADDs). The two key metascientific concepts, I derive from these case studies are a revolutionary new tool’s motivating problem, and its initial and second-phase hook experiments. These concepts hardly exhaust a detailed metascience of tool development experiments in neuroscience, but they get that project off to a useful start and distinguish the subsequent account of neuroscience revolutions clearly from Kuhn’s famous model. I close with a brief remark about the general importance of molecular biology for a current philosophical understanding of science, as comparable to the place physics occupied when Kuhn formulated his famous theory of scientific revolutions. PMID:27013992

  2. Common Bolted Joint Analysis Tool

    NASA Technical Reports Server (NTRS)

    Imtiaz, Kauser

    2011-01-01

    Common Bolted Joint Analysis Tool (comBAT) is an Excel/VB-based bolted joint analysis/optimization program that lays out a systematic foundation for an inexperienced or seasoned analyst to determine fastener size, material, and assembly torque for a given design. Analysts are able to perform numerous what-if scenarios within minutes to arrive at an optimal solution. The program evaluates input design parameters, performs joint assembly checks, and steps through numerous calculations to arrive at several key margins of safety for each member in a joint. It also checks for joint gapping, provides fatigue calculations, and generates joint diagrams for a visual reference. Optimum fastener size and material, as well as correct torque, can then be provided. Analysis methodology, equations, and guidelines are provided throughout the solution sequence so that this program does not become a "black box:" for the analyst. There are built-in databases that reduce the legwork required by the analyst. Each step is clearly identified and results are provided in number format, as well as color-coded spelled-out words to draw user attention. The three key features of the software are robust technical content, innovative and user friendly I/O, and a large database. The program addresses every aspect of bolted joint analysis and proves to be an instructional tool at the same time. It saves analysis time, has intelligent messaging features, and catches operator errors in real time.

  3. Data Mining and Optimization Tools for Developing Engine Parameters Tools

    NASA Technical Reports Server (NTRS)

    Dhawan, Atam P.

    1998-01-01

    This project was awarded for understanding the problem and developing a plan for Data Mining tools for use in designing and implementing an Engine Condition Monitoring System. From the total budget of $5,000, Tricia and I studied the problem domain for developing ail Engine Condition Monitoring system using the sparse and non-standardized datasets to be available through a consortium at NASA Lewis Research Center. We visited NASA three times to discuss additional issues related to dataset which was not made available to us. We discussed and developed a general framework of data mining and optimization tools to extract useful information from sparse and non-standard datasets. These discussions lead to the training of Tricia Erhardt to develop Genetic Algorithm based search programs which were written in C++ and used to demonstrate the capability of GA algorithm in searching an optimal solution in noisy datasets. From the study and discussion with NASA LERC personnel, we then prepared a proposal, which is being submitted to NASA for future work for the development of data mining algorithms for engine conditional monitoring. The proposed set of algorithm uses wavelet processing for creating multi-resolution pyramid of the data for GA based multi-resolution optimal search. Wavelet processing is proposed to create a coarse resolution representation of data providing two advantages in GA based search: 1. We will have less data to begin with to make search sub-spaces. 2. It will have robustness against the noise because at every level of wavelet based decomposition, we will be decomposing the signal into low pass and high pass filters.

  4. Built Environment Analysis Tool: April 2013

    SciTech Connect

    Porter, C.

    2013-05-01

    This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

  5. Terminal Area Conflict Detection and Resolution Tool

    NASA Technical Reports Server (NTRS)

    Verma, Savita Arora

    2011-01-01

    This poster will describe analysis of a conflict detection and resolution tool for the terminal area called T-TSAFE. With altitude clearance information, the tool can reduce false alerts to as low as 2 per hour.

  6. Like People, Power Tools Need Checkups

    MedlinePlus

    ... medlineplus.gov/news/fullstory_161392.html Like People, Power Tools Need Checkups Electrical cords should be free ... activities move indoors, it's time to store gardening power tools safely for the winter. It's also time ...

  7. Tools to Boost Steam System Efficiency

    SciTech Connect

    2005-05-01

    The Steam System Scoping Tool quickly evaluates your entire steam system operation and spots the areas that are the best opportunities for improvement. The tool suggests a range of ways to save steam energy and boost productivity.

  8. Standards for evaluating expert system tools

    NASA Technical Reports Server (NTRS)

    Beach, Sharon S.; Gevarter, William

    1991-01-01

    A brief survey of the literature and proposal for a standard methodology for evaluating expert system building tools are discribed. Criteria for expert systems environmental factors and expert systems tool features are also discussed.

  9. Learning-Oriented Instructional Development Tools.

    ERIC Educational Resources Information Center

    Merrill, M. David

    1997-01-01

    Discusses design requirements, and advantages and disadvantages of the following learner-centered instructional development tools: information containers; authoring systems; templates, models, or widgets; learning-oriented instructional development tools; and adaptive learning-oriented systems. (AEF)

  10. WWW Search Tools in Reference Services.

    ERIC Educational Resources Information Center

    Kimmel, Stacey

    1997-01-01

    Provides an introduction to World Wide Web search tools for reference services. Discusses characteristics of search services and types of tools available, including search engines/robot-generated databases, directories, metasearch engines, and review/rating sites. (AEF)

  11. Comparison of select reference management tools.

    PubMed

    Zhang, Yingting

    2012-01-01

    Bibliographic management tools have been widely used by researchers to store, organize, and manage their references for research papers, theses, dissertations, journal articles, and other publications. There are a number of reference management tools available. In order for users to decide which tool is best for their needs, it is important to know each tool's strengths and weaknesses. This article compares four reference management tools, one of which is licensed by University of Medicine and Dentistry of New Jersey libraries and the other three are open source and freely available. They were chosen based on their functionality, ease of use, availability to library users, and popularity. These four tools are EndNote/EndNote Web, Zotero, Connotea, and Mendeley Desktop/Mendeley Web. Each tool is analyzed in terms of the following features: accessing, collecting, organizing, collaborating, and citing/formatting. A comparison table is included to summarize the key features of these tools.

  12. Quarkonia as a multi-purpose tool

    SciTech Connect

    Vogt, R

    2010-12-21

    Quarkonia can be a very useful tool for understanding the medium in which they are produced and pass through. However, their usefulness as a tool depends on how well certain aspects of their behavior in cold matter are understood.

  13. Comparison of select reference management tools.

    PubMed

    Zhang, Yingting

    2012-01-01

    Bibliographic management tools have been widely used by researchers to store, organize, and manage their references for research papers, theses, dissertations, journal articles, and other publications. There are a number of reference management tools available. In order for users to decide which tool is best for their needs, it is important to know each tool's strengths and weaknesses. This article compares four reference management tools, one of which is licensed by University of Medicine and Dentistry of New Jersey libraries and the other three are open source and freely available. They were chosen based on their functionality, ease of use, availability to library users, and popularity. These four tools are EndNote/EndNote Web, Zotero, Connotea, and Mendeley Desktop/Mendeley Web. Each tool is analyzed in terms of the following features: accessing, collecting, organizing, collaborating, and citing/formatting. A comparison table is included to summarize the key features of these tools. PMID:22289095

  14. Model Rocketry: University-Level Educational Tool

    ERIC Educational Resources Information Center

    Barrowman, James S.

    1974-01-01

    Describes how model rocketry can be a useful educational tool at the university level as a practical application of theoretical aerodynamic concepts and as a tool for students in experimental research. (BR)

  15. Bioinformatics Visualisation Tools: An Unbalanced Picture.

    PubMed

    Broască, Laura; Ancuşa, Versavia; Ciocârlie, Horia

    2016-01-01

    Visualization tools represent a key element in triggering human creativity while being supported with the analysis power of the machine. This paper analyzes free network visualization tools for bioinformatics, frames them in domain specific requirements and compares them. PMID:27577488

  16. 29 CFR 1917.51 - Hand tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) MARINE TERMINALS Cargo Handling Gear and Equipment § 1917.51 Hand tools. (a) Hand tools used by employees... the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the...

  17. 29 CFR 1917.51 - Hand tools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) MARINE TERMINALS Cargo Handling Gear and Equipment § 1917.51 Hand tools. (a) Hand tools used by employees... the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the...

  18. 29 CFR 1917.51 - Hand tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) MARINE TERMINALS Cargo Handling Gear and Equipment § 1917.51 Hand tools. (a) Hand tools used by employees... the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the...

  19. 29 CFR 1917.51 - Hand tools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) MARINE TERMINALS Cargo Handling Gear and Equipment § 1917.51 Hand tools. (a) Hand tools used by employees... the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the...

  20. 29 CFR 1917.51 - Hand tools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) MARINE TERMINALS Cargo Handling Gear and Equipment § 1917.51 Hand tools. (a) Hand tools used by employees... the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the...

  1. Survey of visualization and analysis tools

    NASA Technical Reports Server (NTRS)

    Meyer, P. J.

    1994-01-01

    A large number of commercially available visualization and analysis tools are available to the researcher. Some of the strengths and limitations of some of these tools, from the viewpoint of the earth sciences discipline, are discussed. Visualization and analysis tools fall into one of two categories: those that are designed to a specific purpose and are non-extensive and those that are generic visual programming tools that are extensible. Most of the extensible packages examined incorporate a data flow paradigm.

  2. Environmental Remediation Data Management Tools

    SciTech Connect

    Wierowski, J. V.; Henry, L. G.; Dooley, D. A.

    2002-02-26

    Computer software tools for data management can improve site characterization, planning and execution of remediation projects. This paper discusses the use of two such products that have primarily been used within the nuclear power industry to enhance the capabilities of radiation protection department operations. Advances in digital imaging, web application development and programming technologies have made development of these tools possible. The Interactive Visual Tour System (IVTS) allows the user to easily create and maintain a comprehensive catalog containing digital pictures of the remediation site. Pictures can be cataloged in groups (termed ''tours'') that can be organized either chronologically or spatially. Spatial organization enables the user to ''walk around'' the site and view desired areas or components instantly. Each photo is linked to a map (floor plan, topographical map, elevation drawing, etc.) with graphics displaying the location on the map and any available tour/component links. Chronological organization enables the user to view the physical results of the remediation efforts over time. Local and remote management teams can view these pictures at any time and from any location. The Visual Survey Data System (VSDS) allows users to record survey and sample data directly on photos and/or maps of areas and/or components. As survey information is collected for each area, survey data trends can be reviewed for any repetitively measured location or component. All data is stored in a Quality Assurance (Q/A) records database with reference to its physical sampling point on the site as well as other information to support the final closeout report for the site. The ease of use of these web-based products has allowed nuclear power plant clients to plan outage work from their desktop and realize significant savings with respect to dose and cost. These same tools are invaluable for remediation and decommissioning planning of any scale and for recording

  3. 29 CFR 1926.301 - Hand tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Hand tools. 1926.301 Section 1926.301 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Tools-Hand and Power § 1926.301 Hand tools. (a)...

  4. Tools For Installing Keys On A Stud

    NASA Technical Reports Server (NTRS)

    Goodoak, Robert D.

    1995-01-01

    Two tools designed to be used together to drive long locking keys axially to install them on stud. Tools are: supporter holding keys in correct relative alignment and driver having multiple prongs, each of which fits into one of holes in supporter. Tools prevent bending and breaking of keys during installation, and make possible to install all keys simultaneously, in one motion.

  5. Tool Enlarges Hard-to-Reach Holes

    NASA Technical Reports Server (NTRS)

    Geddes, J. P.

    1984-01-01

    Tool centers itself and cuts precise depth. Tool consists of crosscut carbide bur; sleeve that serves as depth stop and pilot; length of flexible, strong piano wire; and standard drive socket. Parts brazed together. Piano wire transmits torque and axial force to cutting tool.

  6. Multilocus Sequence Typing Tool for Cyclospora cayetanensis

    PubMed Central

    Guo, Yaqiong; Roellig, Dawn M.; Li, Na; Tang, Kevin; Frace, Michael; Ortega, Ynes; Arrowood, Michael J.; Qvarnstrom, Yvonne; Wang, Lin; Moss, Delynn M.; Zhang, Longxian; Xiao, Lihua

    2016-01-01

    Because the lack of typing tools for Cyclospora cayetanensis has hampered outbreak investigations, we sequenced its genome and developed a genotyping tool. We observed 2 to 10 geographically segregated sequence types at each of 5 selected loci. This new tool could be useful for case linkage and infection/contamination source tracking. PMID:27433881

  7. 33 CFR 101.510 - Assessment tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... may include: (a) DHS/TSA's vulnerability self-assessment tool located at http://www.tsa.gov/risk; and... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Assessment tools. 101.510 Section... MARITIME SECURITY: GENERAL Other Provisions § 101.510 Assessment tools. Ports, vessels, and...

  8. 33 CFR 101.510 - Assessment tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... may include: (a) DHS/TSA's vulnerability self-assessment tool located at http://www.tsa.gov/risk; and... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Assessment tools. 101.510 Section... MARITIME SECURITY: GENERAL Other Provisions § 101.510 Assessment tools. Ports, vessels, and...

  9. Ketso: A New Tool for Extension Professionals

    ERIC Educational Resources Information Center

    Bates, James S.

    2016-01-01

    Extension professionals employ many techniques and tools to obtain feedback, input, information, and data from stakeholders, research participants, and program learners. An information-gathering tool called Ketso is described in this article. This tool and its associated techniques can be used in all phases of program development, implementation,…

  10. Health Indicators: A Tool for Program Review

    ERIC Educational Resources Information Center

    Abou-Sayf, Frank K.

    2006-01-01

    A visual tool used to evaluate instructional program performance has been designed by the University of Hawaii Community College system. The tool combines features from traffic lights, blood-chemistry test reports, and industry production control charts, and is labeled the Program Health-Indicator Chart. The tool was designed to minimize the labor…

  11. Employing Cognitive Tools within Interactive Multimedia Applications.

    ERIC Educational Resources Information Center

    Hedberg, John; And Others

    This paper describes research into the use of cognitive tools in the classroom using "Exploring the Nardoo", an information landscape designed to support student investigation. Simulations and support tools which allow multimedia reporting are embedded in the package and are supported by several metacognitive tools for the writing process. The…

  12. Journaling: An Underutilized School Counseling Tool

    ERIC Educational Resources Information Center

    Zyromski, Brett

    2007-01-01

    The effectiveness of journaling as a therapeutic and teaching tool is well documented. However, specific examples of school counselors utilizing journaling as a therapeutic tool are sparse. Existing school counseling literature was reviewed and journaling as an educational and therapeutic tool was explored and related to the school counseling…

  13. Tooling for electrochemical deburring. Topical report

    SciTech Connect

    Moore, W.M.

    1981-08-01

    Observations on the design and construction of electrochemical deburring tools are reported. Specific areas discussed include tooling limitations, process limitations, characteristics of the electrode, insulation of critical areas, and basic concepts for preventing tooling problems. The observations are based on an analysis of over 40 applications on precision miniature mechanism components.

  14. 29 CFR 1915.133 - Hand tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Hand tools. 1915.133 Section 1915.133 Labor Regulations...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Tools and Related Equipment § 1915.133 Hand...) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including crescent,...

  15. 29 CFR 1915.133 - Hand tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Hand tools. 1915.133 Section 1915.133 Labor Regulations...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Tools and Related Equipment § 1915.133 Hand...) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including crescent,...

  16. 29 CFR 1915.133 - Hand tools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Hand tools. 1915.133 Section 1915.133 Labor Regulations...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Tools and Related Equipment § 1915.133 Hand...) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including crescent,...

  17. 29 CFR 1915.133 - Hand tools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Hand tools. 1915.133 Section 1915.133 Labor Regulations...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Tools and Related Equipment § 1915.133 Hand...) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including crescent,...

  18. 29 CFR 1915.133 - Hand tools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Hand tools. 1915.133 Section 1915.133 Labor Regulations...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Tools and Related Equipment § 1915.133 Hand...) Employers shall not issue or permit the use of unsafe hand tools. (b) Wrenches, including crescent,...

  19. A New Tool for Industry

    NASA Astrophysics Data System (ADS)

    1981-01-01

    Ultrasonic P2L2 bolt monitor is a new industrial tool, developed at Langley Research Laboratory, which is lightweight, portable, extremely accurate because it is not subject to friction error, and it is cost-competitive with the least expensive of other types of accurate strain monitors. P2L2 is an acronym for Pulse Phase Locked Loop. The ultrasound system which measures the stress that occurs when a bolt becomes elongated in the process of tightening, transmits sound waves to the bolt being fastened and receives a return signal indicating changes in bolt stress. Results are translated into a digital reading of the actual stress on the bolt. Device monitors the bolt tensioning process on mine roof bolts that provide increased safety within the mine. Also has utility in industrial applications.

  20. Tools to assess tissue quality.

    PubMed

    Neumeister, Veronique M

    2014-03-01

    Biospecimen science has recognized the importance of tissue quality for accurate molecular and biomarker analysis and efforts are made to standardize tissue procurement, processing and storage conditions of tissue samples. At the same time the field has emphasized the lack of standardization of processes between different laboratories, the variability inherent in the analytical phase and the lack of control over the pre-analytical phase of tissue processing. The problem extends back into tissue samples in biorepositories, which are often decades old and where documentation about tissue processing might not be available. This review highlights pre-analytical variations in tissue handling, processing, fixation and storage and emphasizes the effects of these variables on nucleic acids and proteins in harvested tissue. Finally current tools for quality control regarding molecular or biomarker analysis are summarized and discussed.

  1. Tools for Asteroid Regolith Operations

    NASA Technical Reports Server (NTRS)

    Mueller, Robert P.; Calle, Carlos I.; Mantovani, James G.

    2013-01-01

    This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment.The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 56 and could be rapidly implemented in time for an ARM mission in this decade.

  2. Oncotator: cancer variant annotation tool.

    PubMed

    Ramos, Alex H; Lichtenstein, Lee; Gupta, Manaswi; Lawrence, Michael S; Pugh, Trevor J; Saksena, Gordon; Meyerson, Matthew; Getz, Gad

    2015-04-01

    Oncotator is a tool for annotating genomic point mutations and short nucleotide insertions/deletions (indels) with variant- and gene-centric information relevant to cancer researchers. This information is drawn from 14 different publicly available resources that have been pooled and indexed, and we provide an extensible framework to add additional data sources. Annotations linked to variants range from basic information, such as gene names and functional classification (e.g. missense), to cancer-specific data from resources such as the Catalogue of Somatic Mutations in Cancer (COSMIC), the Cancer Gene Census, and The Cancer Genome Atlas (TCGA). For local use, Oncotator is freely available as a python module hosted on Github (https://github.com/broadinstitute/oncotator). Furthermore, Oncotator is also available as a web service and web application at http://www.broadinstitute.org/oncotator/.

  3. General Mission Analysis Tool (GMAT)

    NASA Technical Reports Server (NTRS)

    Hughes, Steven P.

    2007-01-01

    The General Mission Analysis Tool (GMAT) is a space trajectory optimization and mission analysis system developed by NASA and private industry in the spirit of the NASA Mission. GMAT contains new technology and is a testbed for future technology development. The goal of the GMAT project is to develop new space trajectory optimization and mission design technology by working inclusively with ordinary people, universities, businesses, and other government organizations, and to share that technology in an open and unhindered way. GMAT is a free and open source software system licensed under the NASA Open Source Agreement: free for anyone to use in development of new mission concepts or to improve current missions, freely available in source code form for enhancement or further technology development.

  4. Fault Injection Techniques and Tools

    NASA Technical Reports Server (NTRS)

    Hsueh, Mei-Chen; Tsai, Timothy K.; Iyer, Ravishankar K.

    1997-01-01

    Dependability evaluation involves the study of failures and errors. The destructive nature of a crash and long error latency make it difficult to identify the causes of failures in the operational environment. It is particularly hard to recreate a failure scenario for a large, complex system. To identify and understand potential failures, we use an experiment-based approach for studying the dependability of a system. Such an approach is applied not only during the conception and design phases, but also during the prototype and operational phases. To take an experiment-based approach, we must first understand a system's architecture, structure, and behavior. Specifically, we need to know its tolerance for faults and failures, including its built-in detection and recovery mechanisms, and we need specific instruments and tools to inject faults, create failures or errors, and monitor their effects.

  5. General Mission Analysis Tool (GMAT)

    NASA Technical Reports Server (NTRS)

    Hughes, Steven P. (Compiler)

    2016-01-01

    This is a software tutorial and presentation demonstrating the application of the General Mission Analysis Tool (GMAT) to the critical design phase of NASA missions. The demonstration discusses GMAT basics, then presents a detailed example of GMAT application to the Transiting Exoplanet Survey Satellite (TESS) mission. Other examples include OSIRIS-Rex. This talk is a combination of existing presentations; a GMAT basics and overview, and technical presentations from the TESS and OSIRIS-REx projects on their application of GMAT to critical mission design. The GMAT basics slides are taken from the open source training material. The OSIRIS-REx slides are from a previous conference presentation. The TESS slides are a streamlined version of the CDR package provided by the project with SBU and ITAR data removed by the TESS project.

  6. A Tool for Medical Research

    NASA Technical Reports Server (NTRS)

    1992-01-01

    California Measurements, Inc.'s PC-2 Aerosol Particle Analyzer, developed by William Chiang, a former Jet Propulsion Laboratory (JPL) engineer, was used in a study to measure the size of particles in the medical environment. Chiang has a NASA license for the JPL crystal oscillator technology and originally built the instrument for atmospheric research. In the operating room, it enabled researchers from the University of California to obtain multiple sets of data repeatedly and accurately. The study concluded that significant amounts of aerosols are generated during surgery when power tools are employed, and most of these are in the respirable size. Almost all contain blood and are small enough to pass through surgical masks. Research on the presence of blood aerosols during oral surgery had similar results. Further studies are planned to determine the possibility of HIV transmission during surgery, and the PC-2H will be used to quantify blood aerosols.

  7. Mojo Application Monitoring Tool Suite

    2009-12-11

    Mojo is a software tool suite that can be used to monitor the progress of compute jobs on Linux Clusters and other high-performance computing platforms.Mojo is designed to allow system administrators to monitor the health and progress of computing jobs, and to allow users to view the progress and status of their own jobs. The facilities provided include the ability to notify users of job “hangs”, and to take an automated action (e.g killing themore » job) when something goes wrong. These operations can lead to a more efficient use of scarce resources.« less

  8. Spinoff from a Moon Tool

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Portable self-contained drill capable of extracting core samples as much as 10 feet below the surface was needed for the astronauts. Black & Decker used a specially developed computer program to optimize the design of the drill's motor and insure minimal power consumption. Refinement of the original technology led to the development of a cordless miniature vacuum cleaner called the Dustbuster. It has no hose, no cord, is 14 inches long, and also comes with a storage bracket that also serves as a recharger; plugs into a home outlet that charges the nickel cadmium batteries when not in use. Other home use cordless instruments include drills, shrub trimmers and grass shears. Company also manufactures a number of cordless tools used in the sheet metal automobile and construction industries, and a line of cordless orthopedic instruments.

  9. Air traffic management evaluation tool

    NASA Technical Reports Server (NTRS)

    Sridhar, Banavar (Inventor); Sheth, Kapil S. (Inventor); Chatterji, Gano Broto (Inventor); Bilimoria, Karl D. (Inventor); Grabbe, Shon (Inventor); Schipper, John F. (Inventor)

    2010-01-01

    Method and system for evaluating and implementing air traffic management tools and approaches for managing and avoiding an air traffic incident before the incident occurs. The invention provides flight plan routing and direct routing or wind optimal routing, using great circle navigation and spherical Earth geometry. The invention provides for aircraft dynamics effects, such as wind effects at each altitude, altitude changes, airspeed changes and aircraft turns to provide predictions of aircraft trajectory (and, optionally, aircraft fuel use). A second system provides several aviation applications using the first system. These applications include conflict detection and resolution, miles-in trail or minutes-in-trail aircraft separation, flight arrival management, flight re-routing, weather prediction and analysis and interpolation of weather variables based upon sparse measurements.

  10. Component Modeling Approach Software Tool

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software toolmore » will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code compliance« less

  11. Augmented reality building operations tool

    SciTech Connect

    Brackney, Larry J.

    2014-09-09

    A method (700) for providing an augmented reality operations tool to a mobile client (642) positioned in a building (604). The method (700) includes, with a server (660), receiving (720) from the client (642) an augmented reality request for building system equipment (612) managed by an energy management system (EMS) (620). The method (700) includes transmitting (740) a data request for the equipment (612) to the EMS (620) and receiving (750) building management data (634) for the equipment (612). The method (700) includes generating (760) an overlay (656) with an object created based on the building management data (634), which may be sensor data, diagnostic procedures, or the like. The overlay (656) is configured for concurrent display on a display screen (652) of the client (642) with a real-time image of the building equipment (612). The method (700) includes transmitting (770) the overlay (656) to the client (642).

  12. [New training tools in haemovigilance].

    PubMed

    Péan, D; Brisard, L; Loutrel, O; Lejus, C

    2012-11-01

    The transfusion of blood and blood products is a complex, multi-professional task which is liable to errors from donor to recipient. Simulation is a new training tool in medicine which may result with an improvement for safety and quality of care without any risk for the patient. Different simulators are available: haptic system and low fidelity mannequin for technical skills, software, full scale intermediate to high fidelity mannequin, actors and virtual reality. For haemovigilance training, actors and intermediate to high fidelity mannequins could be used to simulate complex professional situations with identity mistake and crisis management. The environment of full scale simulation is expensive and need technical and pedagogic skills. PMID:23039962

  13. Blogging as a Research Tool

    NASA Astrophysics Data System (ADS)

    Sweetser, Douglas

    2011-11-01

    I work on variations of the Maxwell Lagrange density using quaternions and hypercomplex products of covariant 4-derivatives and 4-potentials. The hope is to unify gravity with the symmetries found in the standard model. It is difficult for someone outside academia to get constructive criticism. I have chosen to blog once a week at Science20.com since March, 2011. Over thirty blogs have been generated, most getting more than a thousand views (high mark is 5k for ``Why Quantum Mechanics is Wierd''). The tools used for web and video blogging will be reviewed. A discussion of my efforts to represent electroweak symmetry with quaternions convinced me I was in error. Instead, my hope is to exploit the observation that U(1) is formally a subgroup of SU(2). A battle over gauge symmetry may be reviewed.

  14. Mojo Application Monitoring Tool Suite

    SciTech Connect

    Ballance, Robert

    2009-12-11

    Mojo is a software tool suite that can be used to monitor the progress of compute jobs on Linux Clusters and other high-performance computing platforms.Mojo is designed to allow system administrators to monitor the health and progress of computing jobs, and to allow users to view the progress and status of their own jobs. The facilities provided include the ability to notify users of job “hangs”, and to take an automated action (e.g killing the job) when something goes wrong. These operations can lead to a more efficient use of scarce resources.

  15. Upgrade Summer Severe Weather Tool

    NASA Technical Reports Server (NTRS)

    Watson, Leela

    2011-01-01

    The goal of this task was to upgrade to the existing severe weather database by adding observations from the 2010 warm season, update the verification dataset with results from the 2010 warm season, use statistical logistic regression analysis on the database and develop a new forecast tool. The AMU analyzed 7 stability parameters that showed the possibility of providing guidance in forecasting severe weather, calculated verification statistics for the Total Threat Score (TTS), and calculated warm season verification statistics for the 2010 season. The AMU also performed statistical logistic regression analysis on the 22-year severe weather database. The results indicated that the logistic regression equation did not show an increase in skill over the previously developed TTS. The equation showed less accuracy than TTS at predicting severe weather, little ability to distinguish between severe and non-severe weather days, and worse standard categorical accuracy measures and skill scores over TTS.

  16. Early childhood caries screening tools

    PubMed Central

    Yoon, Richard K.; Smaldone, Arlene M.; Edelstein, Burton L.

    2013-01-01

    Background Early childhood caries (ECC) is prevalent and consequential. Risk assessment tools have been proposed that can be used to identify children who require intensive interventions. In this study, the authors compare four approaches for identifying children needing early and intensive intervention to prevent or minimize caries experience for their accuracy and clinical usefulness. Methods The authors screened 229 predominantly low-income Hispanic children younger than 3 years with ECC and 242 without ECC by using the American Academy of Pediatric Dentistry’s Caries-risk Assessment Tool (CAT) and the optional screening measure of culturing Streptococcus mutans. The authors compared four approaches (CAT, CAT minus socioeconomic status, CAT minus socioeconomic status plus mutans streptococci [MS] and MS alone) for accuracy and clinical usefulness. Results The results of the CAT demonstrated high sensitivity (100.0 percent) and negative predictive value (NPV) (100.0 percent) but low specificity (2.9 percent) and positive predictive value (PPV) (49.4 percent). The MS culture alone had the highest combination of accuracy and clinical usefulness (sensitivity, 86.5 percent; specificity, 93.4 percent; PPV, 92.5 percent; NPV, 87.9 percent). When we removed the socioeconomic status element, the CAT’s performance improved. Conclusions Salivary culture of MS alone in a population of young, low-income Hispanic children outperformed the CAT and variations on the CAT for test accuracy (sensitivity and specificity) and clinical usefulness (predictive values). Clinical Implications Screening for ECC by using salivary MS cultures and variations on the CAT are promising approaches for identifying children who need early and intensive intervention to prevent or minimize caries experience. PMID:22751977

  17. Flow Analysis Tool White Paper

    NASA Technical Reports Server (NTRS)

    Boscia, Nichole K.

    2012-01-01

    Faster networks are continually being built to accommodate larger data transfers. While it is intuitive to think that implementing faster networks will result in higher throughput rates, this is often not the case. There are many elements involved in data transfer, many of which are beyond the scope of the network itself. Although networks may get bigger and support faster technologies, the presence of other legacy components, such as older application software or kernel parameters, can often cause bottlenecks. Engineers must be able to identify when data flows are reaching a bottleneck that is not imposed by the network and then troubleshoot it using the tools available to them. The current best practice is to collect as much information as possible on the network traffic flows so that analysis is quick and easy. Unfortunately, no single method of collecting this information can sufficiently capture the whole endto- end picture. This becomes even more of a hurdle when large, multi-user systems are involved. In order to capture all the necessary information, multiple data sources are required. This paper presents a method for developing a flow analysis tool to effectively collect network flow data from multiple sources and provide that information to engineers in a clear, concise way for analysis. The purpose of this method is to collect enough information to quickly (and automatically) identify poorly performing flows along with the cause of the problem. The method involves the development of a set of database tables that can be populated with flow data from multiple sources, along with an easyto- use, web-based front-end interface to help network engineers access, organize, analyze, and manage all the information.

  18. LG tools for asymmetric wargaming

    NASA Astrophysics Data System (ADS)

    Stilman, Boris; Yakhnis, Alex; Yakhnis, Vladimir

    2002-07-01

    Asymmetric operations represent conflict where one of the sides would apply military power to influence the political and civil environment, to facilitate diplomacy, and to interrupt specified illegal activities. This is a special type of conflict where the participants do not initiate full-scale war. Instead, the sides may be engaged in a limited open conflict or one or several sides may covertly engage another side using unconventional or less conventional methods of engagement. They may include peace operations, combating terrorism, counterdrug operations, arms control, support of insurgencies or counterinsurgencies, show of force. An asymmetric conflict can be represented as several concurrent interlinked games of various kinds: military, transportation, economic, political, etc. Thus, various actions of peace violators, terrorists, drug traffickers, etc., can be expressed via moves in different interlinked games. LG tools allow us to fully capture the specificity of asymmetric conflicts employing the major LG concept of hypergame. Hypergame allows modeling concurrent interlinked processes taking place in geographically remote locations at different levels of resolution and time scale. For example, it allows us to model an antiterrorist operation taking place simultaneously in a number of countries around the globe and involving wide range of entities from individuals to combat units to governments. Additionally, LG allows us to model all sides of the conflict at their level of sophistication. Intelligent stakeholders are represented by means of LG generated intelligent strategies. TO generate those strategies, in addition to its own mathematical intelligence, the LG algorithm may incorporate the intelligence of the top-level experts in the respective problem domains. LG models the individual differences between intelligent stakeholders. The LG tools make it possible to incorporate most of the known traits of a stakeholder, i.e., real personalities involved in

  19. TOOL ASSEMBLY WITH BI-DIRECTIONAL BEARING

    DOEpatents

    Longhurst, G.E.

    1961-07-11

    A two-direction motion bearing which is incorporated in a refueling nuclear fuel element trsnsfer tool assembly is described. A plurality of bi- directional bearing assembliesare fixed equi-distantly about the circumference of the transfer tool assembly to provide the tool assembly with a bearing surface- for both axial and rotational motion. Each bi-directional bearing assembly contains a plurality of circumferentially bulged rollers mounted in a unique arrangement which will provide a bearing surface for rotational movement of the tool assembly within a bore. The bi-direc tional bearing assembly itself is capable of rational motion and thus provides for longitudinal movement of the tool assembly.

  20. Method for machining steel with diamond tools

    DOEpatents

    Casstevens, John M.

    1986-01-01

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  1. Method for machining steel with diamond tools

    DOEpatents

    Casstevens, J.M.

    1984-01-01

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  2. Advances of implementing NC machine tools discussed

    NASA Astrophysics Data System (ADS)

    Kukuyev, Y. P.; Trukhan, Y. V.

    1984-11-01

    Numerical control machine tools which are one of the principal resources of reequipment, mechanization and automation of small series and series production in machine building were examined. The continually increasing volume of NC machine tools which are produced and introduced is economically significant for introduction of these machine tools to operation and organization of their effective use. Organizational and technical measures were directed at solving these problems. To insure the fastest introduction of NC machine tools into operation and their technical maintenance, a number of setting up organizations was organized. Setting up services are also provided by the plants manufacturing the NC machine tools, and appropriate subdivisions are created for this purpose.

  3. AUTOSIM: An automated repetitive software testing tool

    NASA Technical Reports Server (NTRS)

    Dunham, J. R.; Mcbride, S. E.

    1985-01-01

    AUTOSIM is a software tool which automates the repetitive run testing of software. This tool executes programming tasks previously performed by a programmer with one year of programming experience. Use of the AUTOSIM tool requires a knowledge base containing information about known faults, code fixes, and the fault diagnosis-correction process. AUTOSIM can be considered as an expert system which replaces a low level of programming expertise. Reference information about the design and implementation of the AUTOSIM software test tool provides flowcharts to assist in maintaining the software code and a description of how to use the tool.

  4. HIP-assisted CTE mismatch tooling

    SciTech Connect

    Zick, D.H.

    1996-12-31

    A novel tooling technique is described which allows diffusion bonding of components with excellent dimensional control. The technique makes use of the difference in coefficients of thermal expansion (CTE) between the tooling and the bonded components. Unlike traditional CTE mismatch tooling, the new technique allows low tensile strength, low cost materials such as graphite or ceramics to be used as the major tooling structure. Hot isostatic pressing (HIP) is employed to clamp together the tooling through a surrounding metallic capsule. An example will be presented of how the technique was used to bond numerous patterned stainless steel plates into a block containing intricate interconnected passages.

  5. Tool use disorders after left brain damage

    PubMed Central

    Baumard, Josselin; Osiurak, François; Lesourd, Mathieu; Le Gall, Didier

    2014-01-01

    In this paper we review studies that investigated tool use disorders in left-brain damaged (LBD) patients over the last 30 years. Four tasks are classically used in the field of apraxia: Pantomime of tool use, single tool use, real tool use and mechanical problem solving. Our aim was to address two issues, namely, (1) the role of mechanical knowledge in real tool use and (2) the cognitive mechanisms underlying pantomime of tool use, a task widely employed by clinicians and researchers. To do so, we extracted data from 36 papers and computed the difference between healthy subjects and LBD patients. On the whole, pantomime of tool use is the most difficult task and real tool use is the easiest one. Moreover, associations seem to appear between pantomime of tool use, real tool use and mechanical problem solving. These results suggest that the loss of mechanical knowledge is critical in LBD patients, even if all of those tasks (and particularly pantomime of tool use) might put differential demands on semantic memory and working memory. PMID:24904487

  6. Software engineering environment tool set integration

    NASA Technical Reports Server (NTRS)

    Selfridge, William P.

    1986-01-01

    Space Transportation System Division (STSD) Engineering has a program to promote excellence within the engineering function. This program resulted in a capital funded facility based on a VAX cluster called the Rockwell Operational Engineering System (ROSES). The second phase of a three phase plan to establish an integrated software engineering environment for ROSES is examined. It discusses briefly phase one which establishes the basic capability for a modern software development environment to include a tool set, training and standards. Phase two is a tool set integration. The tool set is primarily off-the-shelf tools acquired through vendors or government agencies (public domain). These tools were placed into categories of software development. These categories are: requirements, design, and construction support; verification and validation support; and software management support. The integration of the tool set is being performed through concept prototyping and development of tools specifically designed to support the life cycle and provide transition from one phase to the next.

  7. The neural basis of human tool use.

    PubMed

    Orban, Guy A; Caruana, Fausto

    2014-01-01

    In this review, we propose that the neural basis for the spontaneous, diversified human tool use is an area devoted to the execution and observation of tool actions, located in the left anterior supramarginal gyrus (aSMG). The aSMG activation elicited by observing tool use is typical of human subjects, as macaques show no similar activation, even after an extensive training to use tools. The execution of tool actions, as well as their observation, requires the convergence upon aSMG of inputs from different parts of the dorsal and ventral visual streams. Non-semantic features of the target object may be provided by the posterior parietal cortex (PPC) for tool-object interaction, paralleling the well-known PPC input to anterior intraparietal (AIP) for hand-object interaction. Semantic information regarding tool identity, and knowledge of the typical manner of handling the tool, could be provided by inferior and middle regions of the temporal lobe. Somatosensory feedback and technical reasoning, as well as motor and intentional constraints also play roles during the planning of tool actions and consequently their signals likewise converge upon aSMG. We further propose that aSMG may have arisen though duplication of monkey AIP and invasion of the duplicate area by afferents from PPC providing distinct signals depending on the kinematics of the manipulative action. This duplication may have occurred when Homo Habilis or Homo Erectus emerged, generating the Oldowan or Acheulean Industrial complexes respectively. Hence tool use may have emerged during hominid evolution between bipedalism and language. We conclude that humans have two parietal systems involved in tool behavior: a biological circuit for grasping objects, including tools, and an artifactual system devoted specifically to tool use. Only the latter allows humans to understand the causal relationship between tool use and obtaining the goal, and is likely to be the basis of all technological developments. PMID

  8. The neural basis of human tool use

    PubMed Central

    Orban, Guy A.; Caruana, Fausto

    2014-01-01

    In this review, we propose that the neural basis for the spontaneous, diversified human tool use is an area devoted to the execution and observation of tool actions, located in the left anterior supramarginal gyrus (aSMG). The aSMG activation elicited by observing tool use is typical of human subjects, as macaques show no similar activation, even after an extensive training to use tools. The execution of tool actions, as well as their observation, requires the convergence upon aSMG of inputs from different parts of the dorsal and ventral visual streams. Non-semantic features of the target object may be provided by the posterior parietal cortex (PPC) for tool-object interaction, paralleling the well-known PPC input to anterior intraparietal (AIP) for hand-object interaction. Semantic information regarding tool identity, and knowledge of the typical manner of handling the tool, could be provided by inferior and middle regions of the temporal lobe. Somatosensory feedback and technical reasoning, as well as motor and intentional constraints also play roles during the planning of tool actions and consequently their signals likewise converge upon aSMG. We further propose that aSMG may have arisen though duplication of monkey AIP and invasion of the duplicate area by afferents from PPC providing distinct signals depending on the kinematics of the manipulative action. This duplication may have occurred when Homo Habilis or Homo Erectus emerged, generating the Oldowan or Acheulean Industrial complexes respectively. Hence tool use may have emerged during hominid evolution between bipedalism and language. We conclude that humans have two parietal systems involved in tool behavior: a biological circuit for grasping objects, including tools, and an artifactual system devoted specifically to tool use. Only the latter allows humans to understand the causal relationship between tool use and obtaining the goal, and is likely to be the basis of all technological developments. PMID

  9. The neural basis of human tool use.

    PubMed

    Orban, Guy A; Caruana, Fausto

    2014-01-01

    In this review, we propose that the neural basis for the spontaneous, diversified human tool use is an area devoted to the execution and observation of tool actions, located in the left anterior supramarginal gyrus (aSMG). The aSMG activation elicited by observing tool use is typical of human subjects, as macaques show no similar activation, even after an extensive training to use tools. The execution of tool actions, as well as their observation, requires the convergence upon aSMG of inputs from different parts of the dorsal and ventral visual streams. Non-semantic features of the target object may be provided by the posterior parietal cortex (PPC) for tool-object interaction, paralleling the well-known PPC input to anterior intraparietal (AIP) for hand-object interaction. Semantic information regarding tool identity, and knowledge of the typical manner of handling the tool, could be provided by inferior and middle regions of the temporal lobe. Somatosensory feedback and technical reasoning, as well as motor and intentional constraints also play roles during the planning of tool actions and consequently their signals likewise converge upon aSMG. We further propose that aSMG may have arisen though duplication of monkey AIP and invasion of the duplicate area by afferents from PPC providing distinct signals depending on the kinematics of the manipulative action. This duplication may have occurred when Homo Habilis or Homo Erectus emerged, generating the Oldowan or Acheulean Industrial complexes respectively. Hence tool use may have emerged during hominid evolution between bipedalism and language. We conclude that humans have two parietal systems involved in tool behavior: a biological circuit for grasping objects, including tools, and an artifactual system devoted specifically to tool use. Only the latter allows humans to understand the causal relationship between tool use and obtaining the goal, and is likely to be the basis of all technological developments.

  10. Process for selecting engineering tools : applied to selecting a SysML tool.

    SciTech Connect

    De Spain, Mark J.; Post, Debra S.; Taylor, Jeffrey L.; De Jong, Kent

    2011-02-01

    Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

  11. Choosing and Using Tools: Prior Experience and Task Difficulty Influence Preschoolers' Tool-Use Strategies

    ERIC Educational Resources Information Center

    Gardiner, Amy K.; Bjorklund, David F.; Greif, Marissa L.; Gray, Sarah K.

    2012-01-01

    Children's acquisition of tool use abilities is an important part of development but is not yet well understood. This study compares two modes of tool-use learning, observation and individual haptic experience. Two- and 3-year-olds had haptic experience with tools, observed tool use by others, had both haptic and observational experience, or no…

  12. ADVANCED POWER SYSTEMS ANALYSIS TOOLS

    SciTech Connect

    Robert R. Jensen; Steven A. Benson; Jason D. Laumb

    2001-08-31

    The use of Energy and Environmental Research Center (EERC) modeling tools and improved analytical methods has provided key information in optimizing advanced power system design and operating conditions for efficiency, producing minimal air pollutant emissions and utilizing a wide range of fossil fuel properties. This project was divided into four tasks: the demonstration of the ash transformation model, upgrading spreadsheet tools, enhancements to analytical capabilities using the scanning electron microscopy (SEM), and improvements to the slag viscosity model. The ash transformation model, Atran, was used to predict the size and composition of ash particles, which has a major impact on the fate of the combustion system. To optimize Atran key factors such as mineral fragmentation and coalescence, the heterogeneous and homogeneous interaction of the organically associated elements must be considered as they are applied to the operating conditions. The resulting model's ash composition compares favorably to measured results. Enhancements to existing EERC spreadsheet application included upgrading interactive spreadsheets to calculate the thermodynamic properties for fuels, reactants, products, and steam with Newton Raphson algorithms to perform calculations on mass, energy, and elemental balances, isentropic expansion of steam, and gasifier equilibrium conditions. Derivative calculations can be performed to estimate fuel heating values, adiabatic flame temperatures, emission factors, comparative fuel costs, and per-unit carbon taxes from fuel analyses. Using state-of-the-art computer-controlled scanning electron microscopes and associated microanalysis systems, a method to determine viscosity using the incorporation of grey-scale binning acquired by the SEM image was developed. The image analysis capabilities of a backscattered electron image can be subdivided into various grey-scale ranges that can be analyzed separately. Since the grey scale's intensity is

  13. Towards Model Driven Tool Interoperability: Bridging Eclipse and Microsoft Modeling Tools

    NASA Astrophysics Data System (ADS)

    Brunelière, Hugo; Cabot, Jordi; Clasen, Cauê; Jouault, Frédéric; Bézivin, Jean

    Successful application of model-driven engineering approaches requires interchanging a lot of relevant data among the tool ecosystem employed by an engineering team (e.g., requirements elicitation tools, several kinds of modeling tools, reverse engineering tools, development platforms and so on). Unfortunately, this is not a trivial task. Poor tool interoperability makes data interchange a challenge even among tools with a similar scope. This paper presents a model-based solution to overcome such interoperability issues. With our approach, the internal schema/s (i.e., metamodel/s) of each tool are explicited and used as basis for solving syntactic and semantic differences between the tools. Once the corresponding metamodels are aligned, model-to-model transformations are (semi)automatically derived and executed to perform the actual data interchange. We illustrate our approach by bridging the Eclipse and Microsoft (DSL Tools and SQL Server Modeling) modeling tools.

  14. Modeling Tool Advances Rotorcraft Design

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Continuum Dynamics Inc. (CDI), founded in 1979, specializes in advanced engineering services, including fluid dynamic modeling and analysis for aeronautics research. The company has completed a number of SBIR research projects with NASA, including early rotorcraft work done through Langley Research Center, but more recently, out of Ames Research Center. NASA Small Business Innovation Research (SBIR) grants on helicopter wake modeling resulted in the Comprehensive Hierarchical Aeromechanics Rotorcraft Model (CHARM), a tool for studying helicopter and tiltrotor unsteady free wake modeling, including distributed and integrated loads, and performance prediction. Application of the software code in a blade redesign program for Carson Helicopters, of Perkasie, Pennsylvania, increased the payload and cruise speeds of its S-61 helicopter. Follow-on development resulted in a $24 million revenue increase for Sikorsky Aircraft Corporation, of Stratford, Connecticut, as part of the company's rotor design efforts. Now under continuous development for more than 25 years, CHARM models the complete aerodynamics and dynamics of rotorcraft in general flight conditions. CHARM has been used to model a broad spectrum of rotorcraft attributes, including performance, blade loading, blade-vortex interaction noise, air flow fields, and hub loads. The highly accurate software is currently in use by all major rotorcraft manufacturers, NASA, the U.S. Army, and the U.S. Navy.

  15. Risk Assessment/Management Tool

    2010-12-31

    RAMTool performs the following: • A tool to perform facility and programmatic risk assessments, produce risk registers, develop risk management plans (RMPs), link risks to improvement/risk-reduction projects, and actively manage risks • Ability to conduct risk assessments. Ease of determination of probability and consequence based on industry standard risk matrices. Complies with site risk management performance document. Provides multiple outputs/report for required risk forms. Conduct quick risk data analysis. • Performs/calculates a facility risk factormore » (RF) and a programmatic RF. Supports project and initiative prioritization and funding in order to make solid decisions on risk reduction. Assigns responsibility and accountability at a risk owner (RO) level. Monitors and tracks progress toward completing mitigation strategies. Ability to import massive amounts of data at the push of a button. Integrates development of a Risk Management Plan (RMP) Built for ease-of-use – design, built, and used by technical/management personnel. Can be customized (functions and/or reports) for further analysis« less

  16. Geodesics: a Tool in Manufacturing

    NASA Astrophysics Data System (ADS)

    Zantout, Rached Nabil

    In manufacturing nowadays, many applications await the development of computationally efficient, on-line, robotic systems that are able to mimic human capabilities. Robotic systems that are able to recognize or differentiate between a small number of objects have been developed over the past few years. The tools of choice for enabling a robot to recognize an object are almost always vision and touch. In this dissertation we re-introduce the concept of geodesics as useful curves to recognize a surface. We start by defining a geodesic and listing some of its properties. Then we introduce a new method to calculate geodesics using only digitized points on a surface. Geodesics are then proven to be useful in manufacturing by applying them to two areas. Geodesics are used to recognize the type and parameters of a surface based on its digitized points. Moreover, geodesics are used to calculate the material properties of a surface undergoing deformation. Many other applications are possible areas where geodesics can prove useful. We conclude this dissertation by talking about such applications and suggesting possible ways where geodesics can be used to improve those applications.

  17. Behavior Prediction Tools Strengthen Nanoelectronics

    NASA Technical Reports Server (NTRS)

    2013-01-01

    Several years ago, NASA started making plans to send robots to explore the deep, dark craters on the Moon. As part of these plans, NASA needed modeling tools to help engineer unique electronics to withstand extremely cold temperatures. According to Jonathan Pellish, a flight systems test engineer at Goddard Space Flight Center, "An instrument sitting in a shadowed crater on one of the Moon s poles would hover around 43 K", that is, 43 kelvin, equivalent to -382 F. Such frigid temperatures are one of the main factors that make the extreme space environments encountered on the Moon and elsewhere so extreme. Radiation is another main concern. "Radiation is always present in the space environment," says Pellish. "Small to moderate solar energetic particle events happen regularly and extreme events happen less than a handful of times throughout the 7 active years of the 11-year solar cycle." Radiation can corrupt data, propagate to other systems, require component power cycling, and cause a host of other harmful effects. In order to explore places like the Moon, Jupiter, Saturn, Venus, and Mars, NASA must use electronic communication devices like transmitters and receivers and data collection devices like infrared cameras that can resist the effects of extreme temperature and radiation; otherwise, the electronics would not be reliable for the duration of the mission.

  18. High performance electromagnetic simulation tools

    NASA Astrophysics Data System (ADS)

    Gedney, Stephen D.; Whites, Keith W.

    1994-10-01

    Army Research Office Grant #DAAH04-93-G-0453 has supported the purchase of 24 additional compute nodes that were installed in the Intel iPsC/860 hypercube at the Univesity Of Kentucky (UK), rendering a 32-node multiprocessor. This facility has allowed the investigators to explore and extend the boundaries of electromagnetic simulation for important areas of defense concerns including microwave monolithic integrated circuit (MMIC) design/analysis and electromagnetic materials research and development. The iPSC/860 has also provided an ideal platform for MMIC circuit simulations. A number of parallel methods based on direct time-domain solutions of Maxwell's equations have been developed on the iPSC/860, including a parallel finite-difference time-domain (FDTD) algorithm, and a parallel planar generalized Yee-algorithm (PGY). The iPSC/860 has also provided an ideal platform on which to develop a 'virtual laboratory' to numerically analyze, scientifically study and develop new types of materials with beneficial electromagnetic properties. These materials simulations are capable of assembling hundreds of microscopic inclusions from which an electromagnetic full-wave solution will be obtained in toto. This powerful simulation tool has enabled research of the full-wave analysis of complex multicomponent MMIC devices and the electromagnetic properties of many types of materials to be performed numerically rather than strictly in the laboratory.

  19. SSRL Emergency Response Shore Tool

    NASA Technical Reports Server (NTRS)

    Mah, Robert W.; Papasin, Richard; McIntosh, Dawn M.; Denham, Douglas; Jorgensen, Charles; Betts, Bradley J.; Del Mundo, Rommel

    2006-01-01

    The SSRL Emergency Response Shore Tool (wherein SSRL signifies Smart Systems Research Laboratory ) is a computer program within a system of communication and mobile-computing software and hardware being developed to increase the situational awareness of first responders at building collapses. This program is intended for use mainly in planning and constructing shores to stabilize partially collapsed structures. The program consists of client and server components, runs in the Windows operating system on commercial off-the-shelf portable computers, and can utilize such additional hardware as digital cameras and Global Positioning System devices. A first responder can enter directly, into a portable computer running this program, the dimensions of a required shore. The shore dimensions, plus an optional digital photograph of the shore site, can then be uploaded via a wireless network to a server. Once on the server, the shore report is time-stamped and made available on similarly equipped portable computers carried by other first responders, including shore wood cutters and an incident commander. The staff in a command center can use the shore reports and photographs to monitor progress and to consult with structural engineers to assess whether a building is in imminent danger of further collapse.

  20. Psychological tools for knowledge acquisition

    NASA Technical Reports Server (NTRS)

    Rueter, Henry H.; Olson, Judith Reitman

    1988-01-01

    Knowledge acquisition is said to be the biggest bottleneck in the development of expert systems. The problem is getting the knowledge out of the expert's head and into a computer. In cognitive psychology, characterizing metal structures and why experts are good at what they do is an important research area. Is there some way that the tools that psychologists have developed to uncover mental structure can be used to benefit knowledge engineers? We think that the way to find out is to browse through the psychologist's toolbox to see what there is in it that might be of use to knowledge engineers. Expert system developers have relied on two standard methods for extracting knowledge from the expert: (1) the knowledge engineer engages in an intense bout of interviews with the expert or experts, or (2) the knowledge engineer becomes an expert himself, relying on introspection to uncover the basis of his own expertise. Unfortunately, these techniques have the difficulty that often the expert himself isn't consciously aware of the basis of his expertise. If the expert himself isn't conscious of how he solves problems, introspection is useless. Cognitive psychology has faced similar problems for many years and has developed exploratory methods that can be used to discover cognitive structure from simple data.

  1. SETI as an educational tool

    NASA Astrophysics Data System (ADS)

    Vaile, R. A.

    SETI offers an extraordinary catalyst in our search for a better education. While the glamour of movie images increased the general public awareness of the term "SETI", we are challenged to improve the level of public understanding of the fundamental scientific and technological issues involved in SETI. It is also critical to keep in mind the reality of human existence. No country seems entirely at peace, whether one considers cultural, trade, military, or heritage issues; no country seems content with the breadth and standards of education for following generations. However, SETI requires generations to participate across cultures, and this long-term human involvement must be sustained through both education and communication across many disciplines and different cultures. For both these major roles, SETI appears to offer a tantalising range and depth, both in educational tools, and in superb tests of communication skills. This paper considers the educational influence of roles evoked by SETI issues. We will briefly consider the range in expertise needed in SETI, the means of improving the public SETI awareness, and mechanisms through which such education may explore the consequences of any SETI result (whether judged as successful or not). Examples of the use of SETI in formal secondary and University education are briefly reviewed.

  2. CATO: The Clone Alignment Tool.

    PubMed

    Henstock, Peter V; LaPan, Peter

    2016-01-01

    High-throughput cloning efforts produce large numbers of sequences that need to be aligned, edited, compared with reference sequences, and organized as files and selected clones. Different pieces of software are typically required to perform each of these tasks. We have designed a single piece of software, CATO, the Clone Alignment Tool, that allows a user to align, evaluate, edit, and select clone sequences based on comparisons to reference sequences. The input and output are designed to be compatible with standard data formats, and thus suitable for integration into a clone processing pipeline. CATO provides both sequence alignment and visualizations to facilitate the analysis of cloning experiments. The alignment algorithm matches each of the relevant candidate sequences against each reference sequence. The visualization portion displays three levels of matching: 1) a top-level summary of the top candidate sequences aligned to each reference sequence, 2) a focused alignment view with the nucleotides of matched sequences displayed against one reference sequence, and 3) a pair-wise alignment of a single reference and candidate sequence pair. Users can select the minimum matching criteria for valid clones, edit or swap reference sequences, and export the results to a summary file as part of the high-throughput cloning workflow.

  3. Tool for Ranking Research Options

    NASA Technical Reports Server (NTRS)

    Ortiz, James N.; Scott, Kelly; Smith, Harold

    2005-01-01

    Tool for Research Enhancement Decision Support (TREDS) is a computer program developed to assist managers in ranking options for research aboard the International Space Station (ISS). It could likely also be adapted to perform similar decision-support functions in industrial and academic settings. TREDS provides a ranking of the options, based on a quantifiable assessment of all the relevant programmatic decision factors of benefit, cost, and risk. The computation of the benefit for each option is based on a figure of merit (FOM) for ISS research capacity that incorporates both quantitative and qualitative inputs. Qualitative inputs are gathered and partly quantified by use of the time-tested analytical hierarchical process and used to set weighting factors in the FOM corresponding to priorities determined by the cognizant decision maker(s). Then by use of algorithms developed specifically for this application, TREDS adjusts the projected benefit for each option on the basis of levels of technical implementation, cost, and schedule risk. Based partly on Excel spreadsheets, TREDS provides screens for entering cost, benefit, and risk information. Drop-down boxes are provided for entry of qualitative information. TREDS produces graphical output in multiple formats that can be tailored by users.

  4. Risk Assessment/Management Tool

    SciTech Connect

    Carlos Castillo, Jerel Nelson

    2010-12-31

    RAMTool performs the following: • A tool to perform facility and programmatic risk assessments, produce risk registers, develop risk management plans (RMPs), link risks to improvement/risk-reduction projects, and actively manage risks • Ability to conduct risk assessments. Ease of determination of probability and consequence based on industry standard risk matrices. Complies with site risk management performance document. Provides multiple outputs/report for required risk forms. Conduct quick risk data analysis. • Performs/calculates a facility risk factor (RF) and a programmatic RF. Supports project and initiative prioritization and funding in order to make solid decisions on risk reduction. Assigns responsibility and accountability at a risk owner (RO) level. Monitors and tracks progress toward completing mitigation strategies. Ability to import massive amounts of data at the push of a button. Integrates development of a Risk Management Plan (RMP) Built for ease-of-use – design, built, and used by technical/management personnel. Can be customized (functions and/or reports) for further analysis

  5. CATO: The Clone Alignment Tool.

    PubMed

    Henstock, Peter V; LaPan, Peter

    2016-01-01

    High-throughput cloning efforts produce large numbers of sequences that need to be aligned, edited, compared with reference sequences, and organized as files and selected clones. Different pieces of software are typically required to perform each of these tasks. We have designed a single piece of software, CATO, the Clone Alignment Tool, that allows a user to align, evaluate, edit, and select clone sequences based on comparisons to reference sequences. The input and output are designed to be compatible with standard data formats, and thus suitable for integration into a clone processing pipeline. CATO provides both sequence alignment and visualizations to facilitate the analysis of cloning experiments. The alignment algorithm matches each of the relevant candidate sequences against each reference sequence. The visualization portion displays three levels of matching: 1) a top-level summary of the top candidate sequences aligned to each reference sequence, 2) a focused alignment view with the nucleotides of matched sequences displayed against one reference sequence, and 3) a pair-wise alignment of a single reference and candidate sequence pair. Users can select the minimum matching criteria for valid clones, edit or swap reference sequences, and export the results to a summary file as part of the high-throughput cloning workflow. PMID:27459605

  6. CATO: The Clone Alignment Tool

    PubMed Central

    Henstock, Peter V.; LaPan, Peter

    2016-01-01

    High-throughput cloning efforts produce large numbers of sequences that need to be aligned, edited, compared with reference sequences, and organized as files and selected clones. Different pieces of software are typically required to perform each of these tasks. We have designed a single piece of software, CATO, the Clone Alignment Tool, that allows a user to align, evaluate, edit, and select clone sequences based on comparisons to reference sequences. The input and output are designed to be compatible with standard data formats, and thus suitable for integration into a clone processing pipeline. CATO provides both sequence alignment and visualizations to facilitate the analysis of cloning experiments. The alignment algorithm matches each of the relevant candidate sequences against each reference sequence. The visualization portion displays three levels of matching: 1) a top-level summary of the top candidate sequences aligned to each reference sequence, 2) a focused alignment view with the nucleotides of matched sequences displayed against one reference sequence, and 3) a pair-wise alignment of a single reference and candidate sequence pair. Users can select the minimum matching criteria for valid clones, edit or swap reference sequences, and export the results to a summary file as part of the high-throughput cloning workflow. PMID:27459605

  7. Tools for distributed application management

    NASA Technical Reports Server (NTRS)

    Marzullo, Keith; Wood, Mark; Cooper, Robert; Birman, Kenneth P.

    1990-01-01

    Distributed application management consists of monitoring and controlling an application as it executes in a distributed environment. It encompasses such activities as configuration, initialization, performance monitoring, resource scheduling, and failure response. The Meta system is described: a collection of tools for constructing distributed application management software. Meta provides the mechanism, while the programmer specifies the policy for application management. The policy is manifested as a control program which is a soft real time reactive program. The underlying application is instrumented with a variety of built-in and user defined sensors and actuators. These define the interface between the control program and the application. The control program also has access to a database describing the structure of the application and the characteristics of its environment. Some of the more difficult problems for application management occur when pre-existing, nondistributed programs are integrated into a distributed application for which they may not have been intended. Meta allows management functions to be retrofitted to such programs with a minimum of effort.

  8. Tools for distributed application management

    NASA Technical Reports Server (NTRS)

    Marzullo, Keith; Cooper, Robert; Wood, Mark; Birman, Kenneth P.

    1990-01-01

    Distributed application management consists of monitoring and controlling an application as it executes in a distributed environment. It encompasses such activities as configuration, initialization, performance monitoring, resource scheduling, and failure response. The Meta system (a collection of tools for constructing distributed application management software) is described. Meta provides the mechanism, while the programmer specifies the policy for application management. The policy is manifested as a control program which is a soft real-time reactive program. The underlying application is instrumented with a variety of built-in and user-defined sensors and actuators. These define the interface between the control program and the application. The control program also has access to a database describing the structure of the application and the characteristics of its environment. Some of the more difficult problems for application management occur when preexisting, nondistributed programs are integrated into a distributed application for which they may not have been intended. Meta allows management functions to be retrofitted to such programs with a minimum of effort.

  9. Electrical hand tools and techniques: A compilation. [utilization of space technology for tools and adapters

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Space technology utilization for developing tools, adapters, and fixtures and procedures for assembling, installing, and servicing electrical components and equipment are discussed. Some of the items considered are: (1) pivotal screwdriver, (2) termination locator tool for shielded cables, (3) solder application tools, (4) insulation and shield removing tool, and (5) torque wrench adapter for cable connector engaging ring. Diagrams of the various tools and devices are provided.

  10. Precision pressure/temperature logging tool

    SciTech Connect

    Henfling, J.A.; Normann, R.A.

    1998-01-01

    Past memory logging tools have provided excellent pressure/temperature data when used in a geothermal environment, and they are easier to maintain and deploy than tools requiring an electric wireline connection to the surface. However, they are deficient since the tool operator is unaware of downhole conditions that could require changes in the logging program. Tools that make ``decisions`` based on preprogrammed scenarios can partially overcome this difficulty, and a suite of such memory tools has been developed at Sandia National Laboratories. The first tool, which forms the basis for future instruments, measures pressure and temperature. Design considerations include a minimization of cost while insuring quality data, size compatibility with diamond-cored holes, operation in holes to 425 C (800 F), transportability by ordinary passenger air service, and ease of operation. This report documents the development and construction of the pressure/temperature tool. It includes: (1) description of the major components; (2) calibration; (3) typical logging scenario; (4) tool data examples; and (5) conclusions. The mechanical and electrical drawings, along with the tool`s software, will be furnished upon request.

  11. Collaboration and Command Tools for Crises Management

    NASA Astrophysics Data System (ADS)

    Saarelainen, Tapio; Jormakka, Jorma

    Present collaboration tools are not suitable for the command process. The Collaboration tools, in the use of military entities, lack the elements for command and control and scheduling of resources. Available collaboration tools concentrate on uncontrolled distribution of information. They represent Situational Awareness (SA) tools for the cooperating entities, not the required solution for traceable and sophisticated Command and Control tools (C2-tools) applicable for the Crises Management Environment (CME) and Military Environment (ME). This paper presents tools for crises management, which enables the use of effective C2-tools, functioning along with the Resource Manager (RM) and scheduler. Given tasks need to be traceable afterwards for various purposes. On the base of collected data from the events, actions and reliability of different collaborating entities, a trustworth database of the characteristics of each entity can be formulated and utilized afterwards as a base knowledge on the collaborating entity. Collected data remains in the information repository and the collected data is used for identification purposes of an entity. C2-tools in ME and CME are systems of systems based on trusted entities, which will execute the commanded tasks reliably and in a given time. Reporting tools are out of the scope of this paper.

  12. Slimhole frac pack tools overcome erosion problems

    SciTech Connect

    Stout, G.; Matte, T.; Rogers, B.

    1997-04-01

    The application of frac pack technology for stimulation and sand control in the Gulf of Mexico`s unconsolidated formations has steadily increased during the past several years. In addition, re-entry drilling has been one of the fastest growing development techniques used by operators for optimizing reservoir productivity. As such, smaller casing sizes are becoming more common in oil and gas producing wells. Gravel pack tools were being used for frac packing in 7-in. casing sizes and larger, but no tools were available to frac pack in the smaller 5-in. and 5{1/2}-in. casing. The erosion problems operators were experiencing in 7-in. gravel pack tools heightened concerns about fracturing through 5-in. tools with even smaller flow areas. Flow cutting in the 7-in. tools was so severe that it caused fluid communication between the gravel pack ports and the return flow holes in the crossover tool. This allowed fluid and proppant to return to the annulus above the packer, which could cause possible early screen-out and sticking of the crossover tool. The flow cutting could also reduce the tool`s pressure and tensile ratings. Any one of these problems could jeopardize the success of the frac pack operation. Therefore, an erosion resistant crossover tool for slimhole casing was developed to address these problems and optimize frac pack success.

  13. Rover Wheel-Actuated Tool Interface

    NASA Technical Reports Server (NTRS)

    Matthews, Janet; Ahmad, Norman; Wilcox, Brian

    2007-01-01

    A report describes an interface for utilizing some of the mobility features of a mobile robot for general-purpose manipulation of tools and other objects. The robot in question, now undergoing conceptual development for use on the Moon, is the All-Terrain Hex-Limbed Extra-Terrestrial Explorer (ATHLETE) rover, which is designed to roll over gentle terrain or walk over rough or steep terrain. Each leg of the robot is a six-degree-of-freedom general purpose manipulator tipped by a wheel with a motor drive. The tool interface includes a square cross-section peg, equivalent to a conventional socket-wrench drive, that rotates with the wheel. The tool interface also includes a clamp that holds a tool on the peg, and a pair of fold-out cameras that provides close-up stereoscopic images of the tool and its vicinity. The field of view of the imagers is actuated by the clamp mechanism and is specific to each tool. The motor drive can power any of a variety of tools, including rotating tools for helical fasteners, drills, and such clamping tools as pliers. With the addition of a flexible coupling, it could also power another tool or remote manipulator at a short distance. The socket drive can provide very high torque and power because it is driven by the wheel motor.

  14. Template for Systems Engineering Tools Trade Study

    NASA Technical Reports Server (NTRS)

    Bailey, Michelle D.

    2005-01-01

    A discussion of Systems Engineering tools brings out numerous preferences and reactions regarding tools of choice as well as the functions those tools are to perform. A recent study of Systems Engineering Tools for a new Program illustrated the need for a generic template for use by new Programs or Projects to determine the toolset appropriate for their use. This paper will provide the guidelines new initiatives can follow and tailor to their specific needs, to enable them to make their choice of tools in an efficient and informed manner. Clearly, those who perform purely technical functions will need different tools than those who perform purely systems engineering functions. And, everyone has tools they are comfortable with. That degree of comfort is frequently the deciding factor in tools choice rather than an objective study of all criteria and weighting factors. This paper strives to produce a comprehensive list of criteria for selection with suggestions for weighting factors based on a number of assumptions regarding the given Program or Project. In addition, any given Program will begin with assumptions for its toolset based on Program size, tool cost, user base and technical needs. In providing a template for tool selection, this paper will guide the reader through assumptions based on Program need; decision criteria; potential weighting factors; the need for a compilation of available tools; the importance of tool demonstrations; and finally a down selection of tools. While specific vendors cannot be mentioned in this work, it is expected that this template could serve other Programs in the formulation phase by alleviating the trade study process of some of its subjectivity.

  15. Rotary fast tool servo system and methods

    DOEpatents

    Montesanti, Richard C.; Trumper, David L.

    2007-10-02

    A high bandwidth rotary fast tool servo provides tool motion in a direction nominally parallel to the surface-normal of a workpiece at the point of contact between the cutting tool and workpiece. Three or more flexure blades having all ends fixed are used to form an axis of rotation for a swing arm that carries a cutting tool at a set radius from the axis of rotation. An actuator rotates a swing arm assembly such that a cutting tool is moved in and away from the lathe-mounted, rotating workpiece in a rapid and controlled manner in order to machine the workpiece. A pair of position sensors provides rotation and position information for a swing arm to a control system. A control system commands and coordinates motion of the fast tool servo with the motion of a spindle, rotating table, cross-feed slide, and in-feed slide of a precision lathe.

  16. Tool Gear Version 2.3

    SciTech Connect

    2011-12-05

    Tool Gear Version 2 is an expanded collection of programs and software libraries that form the infrastructure on which software tools may be built. The software tools help application developers understand the performance of the programs or help them find programming errors. Tool Gear includes components for gathering data from target programs, either through direct instrumentations or by parsing the output of third-party tools, transmitting the data to a databse, organizing and storing the data, presenting it through a variety of graphical interfaces. Tool Gear is designed to be an extensible system, so users can manage a variety of data and create new ways to present it. Too Gear is sesigned to work with both sequential and parallel programs on multiple computer platforms

  17. Tool Gear Version 2.3

    2011-12-05

    Tool Gear Version 2 is an expanded collection of programs and software libraries that form the infrastructure on which software tools may be built. The software tools help application developers understand the performance of the programs or help them find programming errors. Tool Gear includes components for gathering data from target programs, either through direct instrumentations or by parsing the output of third-party tools, transmitting the data to a databse, organizing and storing the data,more » presenting it through a variety of graphical interfaces. Tool Gear is designed to be an extensible system, so users can manage a variety of data and create new ways to present it. Too Gear is sesigned to work with both sequential and parallel programs on multiple computer platforms« less

  18. Fermilab Software Tools Program: Fermitools

    SciTech Connect

    Pordes, R.

    1995-10-01

    The Fermilab Software Tools Program (Fermitools) was established in 1994 as an intiative under which Fermilab provides software it has developed to outside collaborators. During the year and a half since its start ten software products have been packaged and made available on the official Fermilab anonymous ftp site, and backup support and information services have been made available for them. During the past decade, institutions outside the Fermilab physics experiment user community have in general only been able to obtain and use Fermilab developed software on an adhoc or informal basis. With the Fermitools program the Fermilab Computing Division has instituted an umbrella under which software that is regarded by its internal user community as useful and of high quality can be provided to users outside of High Energy Physics experiments. The main thrust of the Fermitools program is stimulating collaborative use and further development of the software. Having established minimal umbrella beaurocracy makes collaborative development and support easier. The published caveat given to people who take the software includes the statement ``Provision of the software implies no commitment of support by Fermilab. The Fermilab Computing Division is open to discussing other levels of support for use of the software with responsible and committed users and collaborator``. There have been no negative comments in response to this and the policy has not given rise to any questions or complaints. In this paper we present the goals and strategy of the program and introduce some of the software made available through it. We discuss our experiences to date and mention the perceived benefits of the Program.

  19. Passive Energy Building Design Tool

    1994-11-01

    SOLAR5 is a computer aided design tool to help architects design better, more energy efficient buildings. It is intended for use at the beginning of the design process. To get started, only four pieces of information are necessary to compute the energy needed: the square footage, the number of stories, the kind of building (such as school, home, hotel, or any one of 20 types), and its location (the program stores the temperature ranges formore » fourty major cities). Additional information may be given later to fine tune the design. An expert system using heuristics from a wide range of sources, automatically creates a passive solar baseline building from the four facts specified for that project. By modifying and adapting prior designs the user can create and work upon as many as nine schemes simultaneously. SOLAR5 can analyze the buildings thermal performance for each hour of each month and plot its total heat gain or loss as a three-dimensional surface. After reading the plot, the user can immediately redesign the building and rerun the analysis. Separate heat gain/loss surfaces can be plotted for each of the different parts of the building or schemes that add together to make up the total, including walls, roof, windows, skylights, floor, slab on grade, people, lights, equipment, and infiltration. Two different schemes can be instantly compared by asking for a three-dimensional plot showing only the difference in their performances. The objective of SOLAR5 is to allow the designer to make changes easily and quickly with detailed instantaneous pictorial feedback of the implications of the change.« less

  20. Climate Data Analysis Tools - (CDAT)

    NASA Astrophysics Data System (ADS)

    Doutriaux, C.; Jennifer, A.; Drach, R.; Dubois, P.; Williams, D.

    2003-12-01

    Climate Data Analysis Tools (CDAT) is a software infrastructure that uses an object-oriented scripting language to link together separate software subsystems and packages thus forming an integrated environment for solving model diagnosis problems. The power of the system comes from Python and its ability to seamlessly interconnect software. Python provides a general purpose and full-featured scripting language with a variety of user interfaces including command-line interaction, stand-alone scripts (applications) and graphical user interfaces (GUI). The CDAT subsystems, implemented as modules, provide access to and management of gridded data (Climate Data Management System or CDMS); large-array numerical operations (Numerical Python); and visualization (Visualization and Control System or VCS). One of the most difficult challenges facing climate researchers today is the cataloging and analysis of massive amounts of multi-dimensional global atmospheric and oceanic model data. To reduce the labor intensive and time-consuming process of data management, retrieval, and analysis, PCMDI and other DOE sites have come together to develop intelligent filing system and data management software for the linking of storage devices located throughout the United States and the international climate research community. This effort, headed by PCMDI, NCAR, and ANL will allow users anywhere to remotely access this distributed multi-petabyte archive and perform analysis. PCMDI's CDAT is an innovative system that supports exploration and visualization of climate scientific datasets. As an "open system", the software sub-systems (i.e., modules) are independent and freely available to the global climate community. CDAT is easily extended to include new modules and as a result of its flexibility, PCMDI has integrated other popular software components, such as: the popular Live Access Server (LAS) and the Distributed Oceanographic Data System (DODS). Together with ANL's Globus middleware

  1. Acoustic fault injection tool (AFIT)

    NASA Astrophysics Data System (ADS)

    Schoess, Jeffrey N.

    1999-05-01

    On September 18, 1997, Honeywell Technology Center (HTC) successfully completed a three-week flight test of its rotor acoustic monitoring system (RAMS) at Patuxent River Flight Test Center. This flight test was the culmination of an ambitious 38-month proof-of-concept effort directed at demonstrating the feasibility of detecting crack propagation in helicopter rotor components. The program was funded as part of the U.S. Navy's Air Vehicle Diagnostic Systems (AVDS) program. Reductions in Navy maintenance budgets and available personnel have dictated the need to transition from time-based to 'condition-based' maintenance. Achieving this will require new enabling diagnostic technologies. The application of acoustic emission for the early detection of helicopter rotor head dynamic component faults has proven the feasibility of the technology. The flight-test results demonstrated that stress-wave acoustic emission technology can detect signals equivalent to small fatigue cracks in rotor head components and can do so across the rotating articulated rotor head joints and in the presence of other background acoustic noise generated during flight operation. During the RAMS flight test, 12 test flights were flown from which 25 Gbyte of digital acoustic data and about 15 hours of analog flight data recorder (FDR) data were collected from the eight on-rotor acoustic sensors. The focus of this paper is to describe the CH-46 flight-test configuration and present design details about a new innovative machinery diagnostic technology called acoustic fault injection. This technology involves the injection of acoustic sound into machinery to assess health and characterize operational status. The paper will also address the development of the Acoustic Fault Injection Tool (AFIT), which was successfully demonstrated during the CH-46 flight tests.

  2. Air traffic management evaluation tool

    NASA Technical Reports Server (NTRS)

    Sridhar, Banavar (Inventor); Sheth, Kapil S. (Inventor); Chatterji, Gano Broto (Inventor); Bilimoria, Karl D. (Inventor); Grabbe, Shon (Inventor); Schipper, John F. (Inventor)

    2012-01-01

    Methods for evaluating and implementing air traffic management tools and approaches for managing and avoiding an air traffic incident before the incident occurs. A first system receives parameters for flight plan configurations (e.g., initial fuel carried, flight route, flight route segments followed, flight altitude for a given flight route segment, aircraft velocity for each flight route segment, flight route ascent rate, flight route descent route, flight departure site, flight departure time, flight arrival time, flight destination site and/or alternate flight destination site), flight plan schedule, expected weather along each flight route segment, aircraft specifics, airspace (altitude) bounds for each flight route segment, navigational aids available. The invention provides flight plan routing and direct routing or wind optimal routing, using great circle navigation and spherical Earth geometry. The invention provides for aircraft dynamics effects, such as wind effects at each altitude, altitude changes, airspeed changes and aircraft turns to provide predictions of aircraft trajectory (and, optionally, aircraft fuel use). A second system provides several aviation applications using the first system. Several classes of potential incidents are analyzed and averted, by appropriate change en route of one or more parameters in the flight plan configuration, as provided by a conflict detection and resolution module and/or traffic flow management modules. These applications include conflict detection and resolution, miles-in trail or minutes-in-trail aircraft separation, flight arrival management, flight re-routing, weather prediction and analysis and interpolation of weather variables based upon sparse measurements. The invention combines these features to provide an aircraft monitoring system and an aircraft user system that interact and negotiate changes with each other.

  3. General model for boring tool optimization

    NASA Astrophysics Data System (ADS)

    Moraru, G. M.; rbes, M. V. Ze; Popescu, L. G.

    2016-08-01

    Optimizing a tool (and therefore those for boring) consist in improving its performance through maximizing the objective functions chosen by the designer and/or by user. In order to define and to implement the proposed objective functions, contribute numerous features and performance required by tool users. Incorporation of new features makes the cutting tool to be competitive in the market and to meet user requirements.

  4. EERE's State & Local Energy Data Tool

    SciTech Connect

    Shambarger, Erick; DeCesaro, Jennifer

    2014-06-23

    EERE's State and Local Energy Data (SLED) Tool provides basic energy market information that can help state and local governments plan and implement clean energy projects, including electricity generation; fuel sources and costs; applicable policies, regulations, and financial incentives; and renewable energy resource potential. Watch this video to learn more about the tool and hear testimonials from real users about the benefits of using this tool.

  5. EERE's State & Local Energy Data Tool

    ScienceCinema

    Shambarger, Erick; DeCesaro, Jennifer

    2016-07-12

    EERE's State and Local Energy Data (SLED) Tool provides basic energy market information that can help state and local governments plan and implement clean energy projects, including electricity generation; fuel sources and costs; applicable policies, regulations, and financial incentives; and renewable energy resource potential. Watch this video to learn more about the tool and hear testimonials from real users about the benefits of using this tool.

  6. Machine tools and fixtures: A compilation

    NASA Technical Reports Server (NTRS)

    1971-01-01

    As part of NASA's Technology Utilizations Program, a compilation was made of technological developments regarding machine tools, jigs, and fixtures that have been produced, modified, or adapted to meet requirements of the aerospace program. The compilation is divided into three sections that include: (1) a variety of machine tool applications that offer easier and more efficient production techniques; (2) methods, techniques, and hardware that aid in the setup, alignment, and control of machines and machine tools to further quality assurance in finished products: and (3) jigs, fixtures, and adapters that are ancillary to basic machine tools and aid in realizing their greatest potential.

  7. MFL tool hardware for pipeline inspection

    SciTech Connect

    Tandon, K.K.

    1997-02-01

    The intelligent pig based on the magnetic flux leakage (MFL) is frequently used for inline inspection of gas and liquid transportation pipelines. The tool is capable of reliably detecting and characterizing several commonly occurring pipeline defects including metal loss due to corrosion and gouges, dents, and buckles, which tend to threaten the structural integrity of the pipeline. The defect detection and characterization capabilities of the tool are directly dependent upon the type of critical hardware components and systems selected for the tool assembly. This article discusses the key components of an advanced or high resolution MFL tool.

  8. Ootw Tool Requirements in Relation to JWARS

    SciTech Connect

    Hartley III, D.S.; Packard, S.L.

    1998-01-01

    This document reports the results of the CMke of the Secretary of Defense/Program Analysis & Evaluation (OSD/PA&E) sponsored project to identify how Operations Other Than War (OOTW) tool requirements relate to the Joint Warfare Simulation (JWARS) and, more generally, to joint analytical modeling and simulation (M&S) requirements. It includes recommendations about which OOTW tools (and functionality within tools) should be included in JWARS, which should be managed as joint analytical modeling and simulation (M&S) tools, and which should be left for independent development.

  9. Non-commutative tools for topological insulators

    NASA Astrophysics Data System (ADS)

    Prodan, Emil

    2010-06-01

    This paper reviews several analytic tools for the field of topological insulators, developed with the aid of non-commutative calculus and geometry. The set of tools includes bulk topological invariants defined directly in the thermodynamic limit and in the presence of disorder, whose robustness is shown to have nontrivial physical consequences for the bulk states. The set of tools also includes a general relation between the current of an observable and its edge index, a relation that can be used to investigate the robustness of the edge states against disorder. The paper focuses on the motivations behind creating such tools and on how to use them.

  10. Precision replenishable grinding tool and manufacturing process

    DOEpatents

    Makowiecki, D.M.; Kerns, J.A.; Blaedel, K.L.; Colella, N.J.; Davis, P.J.; Juntz, R.S.

    1998-06-09

    A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool are disclosed. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools. 11 figs.

  11. Precision replenishable grinding tool and manufacturing process

    DOEpatents

    Makowiecki, Daniel M.; Kerns, John A.; Blaedel, Kenneth L.; Colella, Nicholas J.; Davis, Pete J.; Juntz, Robert S.

    1998-01-01

    A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools.

  12. Analysis Tools for CFD Multigrid Solvers

    NASA Technical Reports Server (NTRS)

    Mineck, Raymond E.; Thomas, James L.; Diskin, Boris

    2004-01-01

    Analysis tools are needed to guide the development and evaluate the performance of multigrid solvers for the fluid flow equations. Classical analysis tools, such as local mode analysis, often fail to accurately predict performance. Two-grid analysis tools, herein referred to as Idealized Coarse Grid and Idealized Relaxation iterations, have been developed and evaluated within a pilot multigrid solver. These new tools are applicable to general systems of equations and/or discretizations and point to problem areas within an existing multigrid solver. Idealized Relaxation and Idealized Coarse Grid are applied in developing textbook-efficient multigrid solvers for incompressible stagnation flow problems.

  13. Precision non-contact polishing tool

    DOEpatents

    Taylor, John S.

    1997-01-01

    A non-contact polishing tool that combines two orthogonal slurry flow geometries to provide flexibility in altering the shape of the removal footprint. By varying the relative contributions of the two flow geometries, the footprint shape can be varied between the characteristic shapes corresponding to the two independent flow regimes. In addition, the tool can include a pressure activated means by which the shape of the brim of the tool can be varied. The tool can be utilized in various applications, such as x-ray optical surfaces, x-ray lithography, lenses, etc., where stringent shape and finish tolerances are required.

  14. Precision non-contact polishing tool

    DOEpatents

    Taylor, J.S.

    1997-01-07

    A non-contact polishing tool is disclosed that combines two orthogonal slurry flow geometries to provide flexibility in altering the shape of the removal footprint. By varying the relative contributions of the two flow geometries, the footprint shape can be varied between the characteristic shapes corresponding to the two independent flow regimes. In addition, the tool can include a pressure activated means by which the shape of the brim of the tool can be varied. The tool can be utilized in various applications, such as x-ray optical surfaces, x-ray lithography, lenses, etc., where stringent shape and finish tolerances are required. 5 figs.

  15. Wear Test Of A Preselected Diamond Tool

    NASA Astrophysics Data System (ADS)

    Hurt, H. H.; Showman, G. A.

    1987-02-01

    An investigation was conducted to develop a set of criteria that would allow the typical user to preselect a diamond-turning tool for the most critical optical finishing operations. A wide variety of tools used in this study had their edge quality evaluated by Nomarski and scanning electron microscopy methods, and the diamond crystal orientation and quality were determined by Laue x-ray methods. One of the tools was subjected to a long-term machining test to evaluate the tool wear process and to correlate the wear observed with changes in the scattering properties of the surface.

  16. A Study on the Tool Sharing Policy in FMS with Tool Center

    NASA Astrophysics Data System (ADS)

    Zhang, Xiaoming; Fujii, Susumu; Kaihara, Toshiya

    In this paper we examine the issue of tool management in a Flexible Manufacturing System (FMS). A tool center storing all tools for jobs is introduced and all tools can be shared by the machining centers through tool change between the machining centers and the tool center. Two tool-change methods, “Augmented Magazine Method (AMM)” and “Magazine Carrier Method (MCM)”, are proposed and evaluated using the methods for the allocation of tools and jobs proposed in this study. A job in this study is defined as a sequence of processing operations and is thus processed by a single machining center. We propose a two-stage method to integrate tool planning and the allocation of tools and jobs. The method in the second stage for the allocation of tools and jobs is proposed on the basis of an auction method including a dispatching rule. For the tool planning with AMM at the first stage, we propose a greedy search method to decide the total number of tools. By simulation, we investigate the characteristics and effectiveness of the proposed two-stage method and the tool-change methods together with the effectiveness of several dispatching rules.

  17. Microfluidic Tools for Protein Crystallography

    NASA Astrophysics Data System (ADS)

    Abdallah, Bahige G.

    . Additionally, a passive mixer was created to generate unique solution concentrations within isolated nanowells to crystallize phycocyanin and lysozyme. Crystal imaging with brightfield microscopy, UV fluorescence, and SONICC coupled with numerical modeling allowed quantification of crystal growth conditions for efficient phase diagram development. The developed microfluidic tools demonstrated the capability of improving samples for protein crystallography, offering a foundation for continued development of platforms to aid protein structure determination.

  18. User Centered Clinical Decision Support Tools

    PubMed Central

    Sofianou, A.; Kannry, J.; Mann, D.M.; McGinn, T.G.

    2014-01-01

    Summary Background Dissemination and adoption of clinical decision support (CDS) tools is a major initiative of the Affordable Care Act’s Meaningful Use program. Adoption of CDS tools is multipronged with personal, organizational, and clinical settings factoring into the successful utilization rates. Specifically, the diffusion of innovation theory implies that ‘early adopters’ are more inclined to use CDS tools and younger physicians tend to be ranked in this category. Objective This study examined the differences in adoption of CDS tools across providers’ training level. Participants From November 2010 to 2011, 168 residents and attendings from an academic medical institution were enrolled into a randomized controlled trial. Intervention The intervention arm had access to the CDS tool through the electronic health record (EHR) system during strep and pneumonia patient visits. Main Measures The EHR system recorded details on how intervention arm interacted with the CDS tool including acceptance of the initial CDS alert, completion of risk-score calculators and the signing of medication order sets. Using the EHR data, the study performed bivariate tests and general estimating equation (GEE) modeling to examine the differences in adoption of the CDS tool across residents and attendings. Key Results The completion rates of the CDS calculator and medication order sets were higher amongst first year residents compared to all other training levels. Attendings were the less likely to accept the initial step of the CDS tool (29.3%) or complete the medication order sets (22.4%) that guided their prescription decisions, resulting in attendings ordering more antibiotics (37.1%) during an CDS encounter compared to residents. Conclusion There is variation in adoption of CDS tools across training levels. Attendings tended to accept the tool less but ordered more medications. CDS tools should be tailored to clinicians’ training levels. PMID:25589914

  19. Long-stroke fast tool servo and a tool setting method for freeform optics fabrication

    NASA Astrophysics Data System (ADS)

    Liu, Qiang; Zhou, Xiaoqin; Liu, Zhiwei; Lin, Chao; Ma, Long

    2014-09-01

    Diamond turning assisted by fast tool servo is of high efficiency for the fabrication of freeform optics. This paper describes a long-stroke fast tool servo to obtain a large-amplitude tool motion. It has the advantage of low cost and higher stiffness and natural frequency than other flexure-based long-stroke fast tool servo systems. The fast tool servo is actuated by a voice coil motor and guided by a flexure-hinge structure. Open-loop and close-loop control tests are conducted on the testing platform. While fast tool servo system is an additional motion axis for a diamond turning machine, a tool center adjustment method is described to confirm tool center position in the machine tool coordinate system when the fast tool servo system is fixed on the diamond turning machine. Last, a sinusoidal surface is machined and the results demonstrate that the tool adjustment method is efficient and precise for a flexure-based fast tool servo system, and the fast tool servo system works well on the fabrication of freeform optics.

  20. Ceramic-bonded abrasive grinding tools

    DOEpatents

    Holcombe, C.E. Jr.; Gorin, A.H.; Seals, R.D.

    1994-11-22

    Abrasive grains such as boron carbide, silicon carbide, alumina, diamond, cubic boron nitride, and mullite are combined with a cement primarily comprised of zinc oxide and a reactive liquid setting agent and solidified into abrasive grinding tools. Such grinding tools are particularly suitable for grinding and polishing stone, such as marble and granite.