Two thumbs and one index: A comparison of manual coordination in touch-typing and mobile-typing.

PubMed

Cerni, Tania; Longcamp, Marieke; Job, Remo

2016-06-01

It has been extensively demonstrated that in touch-typing, manual alternation is performed faster than manual repetition (see i.e. Rumelhart & Norman, 1982), due to parallel activation of successive keystrokes. In this experiment, we tested whether the manual coordination patterns typical of touch-typing can be observed in mobile-typing. We recruited skilled touch-typists and divided them into two groups depending on their typing habits on the mobile device. The "one-hand" group typed with one index finger on the mobile, and therefore produced words exclusively through manual repetition. The "two-hands" group used two thumbs, and therefore produced words through a combination of mobile-typing repetitions and alternations. The two groups were tested in a typing to dictation task with both a standard keyboard and a mobile keyboard. Results showed that manual alternation and manual repetition patterns are similar in touch-typing and in mobile-typing. For the "two-hands" group, the mean interkeystroke intervals (IKIs) for touch-typing decreased as manual alterations in words increased in both touch- and mobile-typing. The "one-hand" group showed an opposite pattern in mobile-typing. Bigram frequency was correlated with IKIs per bigrams in both tasks and groups, but the correlation for the "one-hand" group in mobile-typing was different. Our results suggest that manual coordination processes are the same in touch-typing and in mobile-typing despite different effectors, provided that both hands are used to type. Copyright © 2016 Elsevier B.V. All rights reserved.

MFCVs (Manual Flow Control Valves) in the Lab

NASA Image and Video Library

2009-07-07

ISS020-E-017705 (7 July 2009) --- NASA astronaut Michael Barratt, Expedition 20 flight engineer, works at a rotated rack in the Destiny laboratory of the International Space Station during in-flight maintenance (IFM) to adjust the periodic flow rate of manual flow control valves for coolant loops.

MFCVs (Manual Flow Control Valves) in the Lab

NASA Image and Video Library

2009-07-07

ISS020-E-017710 (7 July 2009) --- NASA astronaut Michael Barratt, Expedition 20 flight engineer, works at a rotated rack in the Destiny laboratory of the International Space Station during in-flight maintenance (IFM) to adjust the periodic flow rate of manual flow control valves for coolant loops.

The College of Charleston's 400-Student Observational Lab Program

NASA Astrophysics Data System (ADS)

True, C. M.

2006-06-01

For over thirty years the College of Charleston has been teaching a year-long introductory astronomy course incorporating a mandatory 3 hour lab. Despite our location in a very light polluted, coastal, high humidity, and often cloudy metropolitan area we have emphasized observational activities as much as possible. To accommodate our population of between 300-400 students per semester, we have 28 8-inch Celestron Telescopes and 25 GPS capable 8-inch Meade LX-200 telescopes. Finally, we have a 16 DFM adjacent to our rooftop observing decks. For indoor activities we have access to 42 computers running a variety of astronomy education software. Some of the computer activities are based on the Starry Night software (Backyard and Pro), the CLEA software from Gettysburg College, and Spectrum Explorer from Boston University. Additionally, we have labs involving cratering, eclipses and phases, coordinate systems with celestial globes, the inverse square law, spectroscopy and spectral classification, as well as others. In this presentation we will discuss the difficulties in managing a program of this size. We have approximately 14 lab sections a week. The lab manager's task involves coordinating 8-10 lab instructors and the same number of undergraduate teaching assistants as well as trying to maintain a coherent experience between the labs and lecture sections. Our lab manuals are produced locally with yearly updates. Samples from the manuals will be available. This program has been developed by a large number of College of Charleston astronomy faculty, including Don Drost, Bob Dukes, Chris Fragile, Tim Giblin, Jon Hakkila, Bill Kubinec, Lee Lindner, Jim Neff, Laura Penny, Al Rainis, Terry Richardson, and D. J. Williams, as well as adjunct and visiting faculty Bill Baird, Kevin Bourque, Ethan Denault, Kwayera Davis, Francie Halter, and Alan Johnson. Part of this work has been funded by NSF DUE grants to the College of Charleston.

Auto-tuning for NMR probe using LabVIEW

NASA Astrophysics Data System (ADS)

Quen, Carmen; Pham, Stephanie; Bernal, Oscar

2014-03-01

Typical manual NMR-tuning method is not suitable for broadband spectra spanning several megahertz linewidths. Among the main problems encountered during manual tuning are pulse-power reproducibility, baselines, and transmission line reflections, to name a few. We present a design of an auto-tuning system using graphic programming language, LabVIEW, to minimize these problems. The program uses a simplified model of the NMR probe conditions near perfect tuning to mimic the tuning process and predict the position of the capacitor shafts needed to achieve the desirable impedance. The tuning capacitors of the probe are controlled by stepper motors through a LabVIEW/computer interface. Our program calculates the effective capacitance needed to tune the probe and provides controlling parameters to advance the motors in the right direction. The impedance reading of a network analyzer can be used to correct the model parameters in real time for feedback control.

Berkeley Lab Scientist Named MacArthur "Genius" Fellow for Audio

Science.gov Websites

Preservation Research | Berkeley Lab Berkeley Lab A-Z Index Directory Submit Web People Navigation Berkeley Lab Search Submit Web People Close About the Lab Leadership/Organization Calendar News to digitally recover a 128-year-old recording of Alexander Graham Bell's voice, enabling people to

Variable Lifting Index for Manual-Lifting Risk Assessment: A Preliminary Validation Study.

PubMed

Battevi, Natale; Pandolfi, Monica; Cortinovis, Ivan

2016-08-01

The aim of this study was to evaluate the efficacy of the new Variable Lifting Index (VLI) method, theoretically based on the Revised National Institute for Occupational Safety and Health [NIOSH] Lifting Equation (RNLE), in predicting the risk of acute low-back pain (LBP) in the past 12 months. A new risk variable termed the VLI for assessing variable manual lifting has been developed, but there has been no epidemiological study that evaluates the relationship between the VLI and LBP. A sample of 3,402 study participants from 16 companies in different industrial sectors was analyzed. Of the participants, 2,374 were in the risk exposure group involving manual materials handling (MMH), and 1,028 were in the control group without MMH. The VLI was calculated for each participant in the exposure group using a systematic approach. LBP information was collected by occupational physicians at the study sites. The risk of acute LBP was estimated by calculating the odds ratio (OR) between levels of the risk exposure and the control group using a logistic regression analysis. Both crude and adjusted ORs for body mass index, gender, and age were analyzed. Both crude and adjusted ORs showed a dose-response relationship. As the levels of VLI increased, the risk of LBP increased. This risk relationship existed when VLI was greater than 1. The VLI method can be used to assess the risk of acute LBP, although further studies are needed to confirm the outcome and to define better VLI categories. © 2016, Human Factors and Ergonomics Society.

Favorite Labs from Outstanding Teachers. Monograph VII.

ERIC Educational Resources Information Center

Sheldon, Daniel S., Ed.; Penick, John E., Ed.

This monograph is the first attempt to collect and share some of the teaching techniques, activities, and ideas of former recipients of the Outstanding Biology Teacher Award. The lessons are organized into topical themes to facilitate their incorporation into standard curriculum. The manual is divided into two main sections, "Labs" and "Ideas."…

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Berkeley Lab Berkeley Lab A-Z Index Phone Book Jobs Search DOE Search MSD Go MSD - Materials Investigators Ager, Joel W » Alivisatos, A Paul » Altman, Ehud » Analytis, James » Anderson, Christopher  , Naomi » Gullikson, Eric M » Harris, Stephen J » Hasan, M. Zahid » Hellman, Frances » Helms, Brett A

Three Pedagogical Approaches to Introductory Physics Labs and Their Effects on Student Learning Outcomes

ERIC Educational Resources Information Center

Chambers, Timothy

2014-01-01

This dissertation presents the results of an experiment that measured the learning outcomes associated with three different pedagogical approaches to introductory physics labs. These three pedagogical approaches presented students with the same apparatus and covered the same physics content, but used different lab manuals to guide students through…

California Nitrogen Index

USDA-ARS?s Scientific Manuscript database

The California N Index User Manual is designed to help you become accustomed to the software environment in which the N Index runs. This manual will use an example scenario to demonstrate how to use the N Index to assess nitrogen losses. The objective of this theoretical example is to guide you towa...

Auto-tuning system for NMR probe with LabView

NASA Astrophysics Data System (ADS)

Quen, Carmen; Mateo, Olivia; Bernal, Oscar

2013-03-01

Typical manual NMR-tuning method is not suitable for broadband spectra spanning several megahertz linewidths. Among the main problems encountered during manual tuning are pulse-power reproducibility, baselines, and transmission line reflections, to name a few. We present a design of an auto-tuning system using graphic programming language, LabVIEW, to minimize these problems. The program is designed to analyze the detected power signal of an antenna near the NMR probe and use this analysis to automatically tune the sample coil to match the impedance of the spectrometer (50 Ω). The tuning capacitors of the probe are controlled by a stepper motor through a LabVIEW/computer interface. Our program calculates the area of the power signal as an indicator to control the motor so disconnecting the coil to tune it through a network analyzer is unnecessary. Work supported by NSF-DMR 1105380

Microsoft Licenses Berkeley Lab's Home Energy Saver Code for Its Energy

Science.gov Websites

-based tool for calculating energy use in residential buildings. About one million people visit the Home Management Software | Berkeley Lab Berkeley Lab A-Z Index Directory Submit Web People Navigation Berkeley Lab Search Submit Web People Close About the Lab Leadership/Organization Calendar News

Free manual of cadaver dissection modifiable by other anatomists.

PubMed

Chung, Beom Sun; Chung, Min Suk

2015-06-01

Even in the rapidly changing field of cadaver dissection, published guide books still play an important role in the anatomy lab. However, commercial manuals with lengthy volumes and inflexible copyrights have several limitations which can be complemented by open-source manuals. Recently, the authors have manufactured and distributed a free electronic dissection manual (anatomy.co.kr), where descriptions are written concisely and images are drawn schematically. Moreover, simplified signs are employed to represent the cadaver viewing angles and manner of dissection. Based on the original files of this manual, other anatomists can revise and utilize the descriptions and figures. We expect many updated versions of our manual to be shared between students all over the world.

LabVIEW Interface for PCI-SpaceWire Interface Card

NASA Technical Reports Server (NTRS)

Lux, James; Loya, Frank; Bachmann, Alex

2005-01-01

This software provides a LabView interface to the NT drivers for the PCISpaceWire card, which is a peripheral component interface (PCI) bus interface that conforms to the IEEE-1355/ SpaceWire standard. As SpaceWire grows in popularity, the ability to use SpaceWire links within LabVIEW will be important to electronic ground support equipment vendors. In addition, there is a need for a high-level LabVIEW interface to the low-level device- driver software supplied with the card. The LabVIEW virtual instrument (VI) provides graphical interfaces to support all (1) SpaceWire link functions, including message handling and routing; (2) monitoring as a passive tap using specialized hardware; and (3) low-level access to satellite mission-control subsystem functions. The software is supplied in a zip file that contains LabVIEW VI files, which provide various functions of the PCI-SpaceWire card, as well as higher-link-level functions. The VIs are suitably named according to the matching function names in the driver manual. A number of test programs also are provided to exercise various functions.

Lab Streaming Layer Enabled Myo Data Collection Software User Manual

DTIC Science & Technology

2017-06-07

time - series data over a local network. LSL handles the networking, time -synchronization, (near-) real- time access as well as, optionally, the... series data collection (e.g., brain activity, heart activity, muscle activity) using the LSL application programming interface (API). Time -synchronized...saved to a single extensible data format (XDF) file. Once the time - series data are collected in a Lab Recorder XDF file, users will be able to query

Miami University Information Manual.

ERIC Educational Resources Information Center

Miami Univ., Oxford, OH.

The 1975 information manual is designed to provide current data on policies, procedures, services, facilities, organization and governance of Miami University and, through the extensive index, quick access to this information. The manual is complementary to the university catalog and directory. Information relating to students is in the Student…

Advanced LabVIEW Labs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Eric D.

1999-06-17

In the world of computer-based data acquisition and control, the graphical interface program LabVIEW from National Instruments is so ubiquitous that in many ways it has almost become the laboratory standard. To date, there have been approximately fifteen books concerning LabVIEW, but Professor Essick's treatise takes on a completely different tack than all of the previous discussions. In the more standard treatments of the ways and wherefores of LabVIEW such as LabVIEW Graphical Programming: Practical Applications in Instrumentation and Control by Gary W. Johnson (McGraw Hill, NY 1997), the emphasis has been instructing the reader how to program LabVIEW tomore » create a Virtual Instrument (VI) on the computer for interfacing to a particular instruments. LabVIEW is written in G a graphical programming language developed by National Instruments. In the past the emphasis has been on training the experimenter to learn G . Without going into details here, G incorporates the usual loops, arithmetic expressions, etc., found in many programming languages, but in an icon (graphical) environment. The net result being that LabVIEW contains all of the standard methods needed for interfacing to instruments, data acquisition, data analysis, graphics, and also methodology to incorporate programs written in other languages into LabVIEW. Historically, according to Professor Essick, he developed a series of experiments for an upper division laboratory course for computer-based instrumentation. His observation was that while many students had the necessary background in computer programming languages, there were students who had virtually no concept about writing a computer program let alone a computer- based interfacing program. Thus the beginnings of a concept for not only teaching computer- based instrumentation techniques, but aiso a method for the beginner to experience writing a com- puter program. Professor Essick saw LabVIEW as the perfect environment in which to teach

Advanced LabVIEW Labs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Eric D.

1999-06-17

In the world of computer-based data acquisition and control, the graphical interface program LabVIEW from National Instruments is so ubiquitous that in many ways it has almost become the laboratory standard. To date, there have been approximately fifteen books concerning LabVIEW, but Professor Essick's treatise takes on a completely different tack than all of the previous discussions. In the more standard treatments of the ways and wherefores of LabVIEW such as LabVIEW Graphical Programming: Practical Applications in Instrumentation and Control by Gary W. Johnson (McGraw Hill, NY 1997), the emphasis has been instructing the reader how to program LabVIEW tomore » create a Virtual Instrument (VI) on the computer for interfacing to a particular instruments. LabVIEW is written in "G" a graphical programming language developed by National Instruments. In the past the emphasis has been on training the experimenter to learn "G". Without going into details here, "G" incorporates the usual loops, arithmetic expressions, etc., found in many programming languages, but in an icon (graphical) environment. The net result being that LabVIEW contains all of the standard methods needed for interfacing to instruments, data acquisition, data analysis, graphics, and also methodology to incorporate programs written in other languages into LabVIEW. Historically, according to Professor Essick, he developed a series of experiments for an upper division laboratory course for computer-based instrumentation. His observation was that while many students had the necessary background in computer programming languages, there were students who had virtually no concept about writing a computer program let alone a computer- based interfacing program. Thus the beginnings of a concept for not only teaching computer- based instrumentation techniques, but aiso a method for the beginner to experience writing a com- puter program. Professor Essick saw LabVIEW as the "perfect environment in which to

Long-term screening for sleep apnoea in paced patients: preliminary assessment of a novel patient management flowchart by using automatic pacemaker indexes and sleep lab polygraphy.

PubMed

Aimé, Ezio; Rovida, Marina; Contardi, Danilo; Ricci, Cristian; Gaeta, Maddalena; Innocenti, Ester; Cabral Tantchou-Tchoumi, Jacques

2014-10-01

The primary aim of this pilot study was to prospectively assess a flowchart to screen and diagnose paced patients (pts) affected by sleep apnoeas, by crosschecking indexes derived from pacemakers (minute ventilation sensor on-board) with Sleep-Lab Polygraphy (PG) outcomes. Secondarily, "smoothed" long-term pacemaker indexes (all the information between two consecutive follow-up visits) have been retrospectively compared vs. standard short-term pacemaker indexes (last 24h) at each follow-up (FU) visit, to test their correlation and diagnostic concordance. Data from long-term FU of 61 paced pts were collected. At each visit, the standard short-term apnoea+hypopnoea (PM_AHI) index was retrieved from the pacemaker memory. Patients showing PM_AHI ≥ 30 at least once during FU were proposed to undergo a PG for diagnostic confirmation. Smoothed pacemaker (PM_SAHI) indexes were calculated by averaging the overall number of apnoeas/hypopnoeas over the period between two FU visits, and retrospectively compared with standard PM_AHI. Data were available from 609 consecutive visits (overall 4.64 ± 1.78 years FU). PM_AHI indexes were positive during FU in 40/61 pts (65.6%); 26/40 pts (65%) accepted to undergo a PG recording; Sleep-Lab confirmed positivity in 22/26 pts (84.6% positive predictive value for PM_AHI). A strong correlation (r=0.73) and a high level of concordance were found between smoothed and standard indexes (multivariate analysis, Cohen's-k and Z-score tests). Pacemaker-derived indexes may help in screening paced pts potentially affected by sleep apnoeas. Long-term "smoothed" apnoea indexes could improve the accuracy of pacemaker screening capability, even though this hypothesis must be prospectively confirmed by larger studies. Copyright © 2014 Australian and New Zealand Society of Cardiac and Thoracic Surgeons (ANZSCTS) and the Cardiac Society of Australia and New Zealand (CSANZ). Published by Elsevier B.V. All rights reserved.

Utah traffic lab driving simulator : user manual and flex lanes scenario development.

DOT National Transportation Integrated Search

2012-06-01

This report describes the University of Utah Traffic Lab (UTL) driving simulator, and a scenario development for Flex Lanes driving simulation. The first part describes the driving simulator in details. At the time of installation, the UTL driving si...

Utah Traffic Lab Driving Simulator : User Manual and Flex Lanes Scenario Development

DOT National Transportation Integrated Search

2012-06-01

This report describes the University of Utah Traffic Lab (UTL) driving simulator, and a scenario development for Flex Lanes driving simulation. The first part describes the driving simulator in details. At the time of installation, the UTL driving si...

Lab Reports: A Concise Guide for Non-Native English Speakers

ERIC Educational Resources Information Center

Soundranayagam, Luxshmi

2014-01-01

College students in the non-English-speaking world have to overcome formidable barriers in reading and writing when their medium of instruction is English. One particular problem faced by science majors is the writing of lab reports, a demanding task that might not be effectively supported by the standard guides and manuals available. This paper…

Leader Effectiveness Index Manual.

ERIC Educational Resources Information Center

Moss, Jerome, Jr.; And Others

The "Leader Effectiveness Index (LEI) is a multirater instrument designed to assess the effectiveness of leadership performance of vocational educators. It consists of seven items. The first six items are statements of six broad tasks (or responsibilities) of a leader in vocational education: (1) inspires shared vision and establishes…

Reflections on Three Corporate Research Labs: Bell Labs, HP Labs, Agilent Labs

NASA Astrophysics Data System (ADS)

Hollenhorst, James

2008-03-01

This will be a personal reflection on corporate life and physics-based research in three industrial research labs over three decades, Bell Labs during the 1980's, HP Labs during the 1990's, and Agilent Labs during the 2000's. These were times of great change in all three companies. I'll point out some of the similarities and differences in corporate cultures and how this impacted the research and development activities. Along the way I'll mention some of the great products that resulted from physics-based R&D.

The LabTube - a novel microfluidic platform for assay automation in laboratory centrifuges.

PubMed

Kloke, A; Fiebach, A R; Zhang, S; Drechsel, L; Niekrawietz, S; Hoehl, M M; Kneusel, R; Panthel, K; Steigert, J; von Stetten, F; Zengerle, R; Paust, N

2014-05-07

Assay automation is the key for successful transformation of modern biotechnology into routine workflows. Yet, it requires considerable investment in processing devices and auxiliary infrastructure, which is not cost-efficient for laboratories with low or medium sample throughput or point-of-care testing. To close this gap, we present the LabTube platform, which is based on assay specific disposable cartridges for processing in laboratory centrifuges. LabTube cartridges comprise interfaces for sample loading and downstream applications and fluidic unit operations for release of prestored reagents, mixing, and solid phase extraction. Process control is achieved by a centrifugally-actuated ballpen mechanism. To demonstrate the workflow and functionality of the LabTube platform, we show two LabTube automated sample preparation assays from laboratory routines: DNA extractions from whole blood and purification of His-tagged proteins. Equal DNA and protein yields were observed compared to manual reference runs, while LabTube automation could significantly reduce the hands-on-time to one minute per extraction.

Equivalences between refractive index and equilibrium water content of conventional and silicone hydrogel soft contact lenses from automated and manual refractometry.

PubMed

González-Méijome, José M; López-Alemany, Antonio; Lira, Madalena; Almeida, José B; Oliveira, M Elisabete C D Real; Parafita, Manuel A

2007-01-01

The purpose of the present study was to develop mathematical relationships that allow obtaining equilibrium water content and refractive index of conventional and silicone hydrogel soft contact lenses from refractive index measures obtained with automated refractometry or equilibrium water content measures derived from manual refractometry, respectively. Twelve HEMA-based hydrogels of different hydration and four siloxane-based polymers were assayed. A manual refractometer and a digital refractometer were used. Polynomial models obtained from the sucrose curves of equilibrium water content against refractive index and vice-versa were used either considering the whole range of sucrose concentrations (16-100% equilibrium water content) or a range confined to the equilibrium water content of current soft contact lenses (approximately 20-80% equilibrium water content). Values of equilibrium water content measured with the Atago N-2E and those derived from the refractive index measurement with CLR 12-70 by the applications of sucrose-based models displayed a strong linear correlation (r2 = 0.978). The same correlations were obtained when the models are applied to obtain refractive index values from the Atago N-2E and compared with those (values) given by the CLR 12-70 (r2 = 0.978). No significantly different results are obtained between models derived from the whole range of the sucrose solution or the model limited to the normal range of soft contact lens hydration. Present results will have implications for future experimental and clinical research regarding normal hydration and dehydration experiments with hydrogel polymers, and particularly in the field of contact lenses. 2006 Wiley Periodicals, Inc.

Indexing. ERIC Processing Manual, Section VII.

ERIC Educational Resources Information Center

Houston, Jim, Ed.

Rules and guidelines are provided for subject indexing in the ERIC system. The principle of "subject access" is discussed with particular reference to "coordinate indexing," which involves designating subject content by unit terms (or tags) that may be put together or "coordinated" for subsequent retrieval. The nature…

New Features in ADS Labs

NASA Astrophysics Data System (ADS)

Accomazzi, Alberto; Kurtz, M. J.; Henneken, E. A.; Grant, C. S.; Thompson, D.; Di Milia, G.; Luker, J.; Murray, S. S.

2013-01-01

The NASA Astrophysics Data System (ADS) has been working hard on updating its services and interfaces to better support our community's research needs. ADS Labs is a new interface built on the old tried-and-true ADS Abstract Databases, so all of ADS's content is available through it. In this presentation we highlight the new features that have been developed in ADS Labs over the last year: new recommendations, metrics, a citation tool and enhanced fulltext search. ADS Labs has long been providing article-level recommendations based on keyword similarity, co-readership and co-citation analysis of its corpus. We have now introduced personal recommendations, which provide a list of articles to be considered based on a individual user's readership history. A new metrics interface provides a summary of the basic impact indicators for a list of records. These include the total and normalized number of papers, citations, reads, and downloads. Also included are some of the popular indices such as the h, g and i10 index. The citation helper tool allows one to submit a set of records and obtain a list of top 10 papers which cite and/or are cited by papers in the original list (but which are not in it). The process closely resembles the network approach of establishing "friends of friends" via an analysis of the citation network. The full-text search service now covers more than 2.5 million documents, including all the major astronomy journals, as well as physics journals published by Springer, Elsevier, the American Physical Society, the American Geophysical Union, and all of the arXiv eprints. The full-text search interface interface allows users and librarians to dig deep and find words or phrases in the body of the indexed articles. ADS Labs is available at http://adslabs.org

Graduate teaching assistants' perceptions of teaching competencies required for work in undergraduate science labs

NASA Astrophysics Data System (ADS)

Deacon, Christopher; Hajek, Allyson; Schulz, Henry

2017-11-01

Many post-secondary institutions provide training and resources to help GTAs fulfil their teaching roles. However, few programmes focus specifically on the teaching competencies required by GTAs who work with undergraduate students in laboratory settings where learning tends to be more active and inquiry based than in classroom settings. From a review of 8 GTA manuals, we identified 20 competencies and then surveyed faculty and lab coordinators (FIS) and GTAs from a Faculty of Science at a comprehensive Canadian university to identify which of those competencies are required of GTAs who work in undergraduate science labs. GTAs and FIS did not significantly differ in the competencies they view as required for GTAs to work effectively in undergraduate labs. But, when comparing the responses of GTAs and FIS to TA manuals, 'Clearly and effectively communicates ideas and information with students' was the only competency for which there was agreement on the level of requirement. We also examined GTAs' self-efficacy for each of the identified competencies and found no overall relationship between self-efficacy and demographic characteristics, including experience and training. Our results can be used to inform the design of training programmes specifically for GTAs who work in undergraduate science labs, for example, programmes should provide strategies for GTAs to obtain feedback which they can use to enhance their teaching skills. The goal of this study is to improve undergraduate lab instruction in faculties of science and to enhance the teaching experience of GTAs by better preparing them for their role.

Laser Communications and Fiber Optics Lab Manual. High-Technology Training Module.

ERIC Educational Resources Information Center

Biddick, Robert

This laboratory training manual on laser communications and fiber optics may be used in a general technology-communications course for ninth graders. Upon completion of this exercise, students achieve the following goals: match concepts with laser communication system parts; explain advantages of fiber optic cable over conventional copper wire;…

Macintosh/LabVIEW based control and data acquisition system for a single photon counting fluorometer

NASA Astrophysics Data System (ADS)

Stryjewski, Wieslaw J.

1991-08-01

A flexible software system has been developed for controlling fluorescence decay measurements using the virtual instrument approach offered by LabVIEW. The time-correlated single photon counting instrument operates under computer control in both manual and automatic mode. Implementation time was short and the equipment is now easier to use, reducing the training time required for new investigators. It is not difficult to customize the front panel or adapt the program to a different instrument. We found LabVIEW much more convenient to use for this application than traditional, textual computer languages.

Solar Simulation Laboratory Description and Manual.

DTIC Science & Technology

1985-06-01

2000 was sent back to Cyborg Corp. three times over a five month period for repairs. The solar lab is presently using a loaner from Cyborg Corp. The IBM...PC/XT is connected to the ISAAC 2000 by a RS232 connection. All programs were written in advanced basic ("BASICA"). BASICA was used because Cyborg ...2067 CH/P Temperature.Control Bath TechnicalManual, November. 1980. A 30. Cyborg Corporation, Version 1.2, IS..AC.....Co..mpiut.er.liz e.d Data

MetaMapping the nursing procedure manual.

PubMed

Peace, Jane; Brennan, Patricia Flatley

2006-01-01

Nursing procedure manuals are an important resource for practice, but ensuring that the correct procedure can be located when needed is an ongoing challenge. This poster presents an approach used to automatically index nursing procedures with standardized nursing terminology. Although indexing yielded a low number of mappings, examination of successfully mapped terms, incorrect mappings, and unmapped terms reveals important information about the reasons automated indexing fails.

Three pedagogical approaches to introductory physics labs and their effects on student learning outcomes

NASA Astrophysics Data System (ADS)

Chambers, Timothy

This dissertation presents the results of an experiment that measured the learning outcomes associated with three different pedagogical approaches to introductory physics labs. These three pedagogical approaches presented students with the same apparatus and covered the same physics content, but used different lab manuals to guide students through distinct cognitive processes in conducting their laboratory investigations. We administered post-tests containing multiple-choice conceptual questions and free-response quantitative problems one week after students completed these laboratory investigations. In addition, we collected data from the laboratory practical exam taken by students at the end of the semester. Using these data sets, we compared the learning outcomes for the three curricula in three dimensions of ability: conceptual understanding, quantitative problem-solving skill, and laboratory skills. Our three pedagogical approaches are as follows. Guided labs lead students through their investigations via a combination of Socratic-style questioning and direct instruction, while students record their data and answers to written questions in the manual during the experiment. Traditional labs provide detailed written instructions, which students follow to complete the lab objectives. Open labs provide students with a set of apparatus and a question to be answered, and leave students to devise and execute an experiment to answer the question. In general, we find that students performing Guided labs perform better on some conceptual assessment items, and that students performing Open labs perform significantly better on experimental tasks. Combining a classical test theory analysis of post-test results with in-lab classroom observations allows us to identify individual components of the laboratory manuals and investigations that are likely to have influenced the observed differences in learning outcomes associated with the different pedagogical approaches. Due to

Love the Lab, Hate the Lab Report?

ERIC Educational Resources Information Center

Bjorn, Genevive

2018-01-01

In the author's large, urban high school, enrollment in a laboratory science is mandatory. While the student participation rate for lab activities is over 98%, the turn-in rate for traditional lab reports averages just 35% to 85%. Those students who don't produce a lab report miss a critical opportunity to improve their skills in scientific…

VIEWCACHE: An incremental pointer-base access method for distributed databases. Part 1: The universal index system design document. Part 2: The universal index system low-level design document. Part 3: User's guide. Part 4: Reference manual. Part 5: UIMS test suite

NASA Technical Reports Server (NTRS)

Kelley, Steve; Roussopoulos, Nick; Sellis, Timos

1992-01-01

The goal of the Universal Index System (UIS), is to provide an easy-to-use and reliable interface to many different kinds of database systems. The impetus for this system was to simplify database index management for users, thus encouraging the use of indexes. As the idea grew into an actual system design, the concept of increasing database performance by facilitating the use of time-saving techniques at the user level became a theme for the project. This Final Report describes the Design, the Implementation of UIS, and its Language Interfaces. It also includes the User's Guide and the Reference Manual.

Semantic SenseLab: implementing the vision of the Semantic Web in neuroscience

PubMed Central

Samwald, Matthias; Chen, Huajun; Ruttenberg, Alan; Lim, Ernest; Marenco, Luis; Miller, Perry; Shepherd, Gordon; Cheung, Kei-Hoi

2011-01-01

Summary Objective Integrative neuroscience research needs a scalable informatics framework that enables semantic integration of diverse types of neuroscience data. This paper describes the use of the Web Ontology Language (OWL) and other Semantic Web technologies for the representation and integration of molecular-level data provided by several of SenseLab suite of neuroscience databases. Methods Based on the original database structure, we semi-automatically translated the databases into OWL ontologies with manual addition of semantic enrichment. The SenseLab ontologies are extensively linked to other biomedical Semantic Web resources, including the Subcellular Anatomy Ontology, Brain Architecture Management System, the Gene Ontology, BIRNLex and UniProt. The SenseLab ontologies have also been mapped to the Basic Formal Ontology and Relation Ontology, which helps ease interoperability with many other existing and future biomedical ontologies for the Semantic Web. In addition, approaches to representing contradictory research statements are described. The SenseLab ontologies are designed for use on the Semantic Web that enables their integration into a growing collection of biomedical information resources. Conclusion We demonstrate that our approach can yield significant potential benefits and that the Semantic Web is rapidly becoming mature enough to realize its anticipated promises. The ontologies are available online at http://neuroweb.med.yale.edu/senselab/ PMID:20006477

Semantic SenseLab: Implementing the vision of the Semantic Web in neuroscience.

PubMed

Samwald, Matthias; Chen, Huajun; Ruttenberg, Alan; Lim, Ernest; Marenco, Luis; Miller, Perry; Shepherd, Gordon; Cheung, Kei-Hoi

2010-01-01

Integrative neuroscience research needs a scalable informatics framework that enables semantic integration of diverse types of neuroscience data. This paper describes the use of the Web Ontology Language (OWL) and other Semantic Web technologies for the representation and integration of molecular-level data provided by several of SenseLab suite of neuroscience databases. Based on the original database structure, we semi-automatically translated the databases into OWL ontologies with manual addition of semantic enrichment. The SenseLab ontologies are extensively linked to other biomedical Semantic Web resources, including the Subcellular Anatomy Ontology, Brain Architecture Management System, the Gene Ontology, BIRNLex and UniProt. The SenseLab ontologies have also been mapped to the Basic Formal Ontology and Relation Ontology, which helps ease interoperability with many other existing and future biomedical ontologies for the Semantic Web. In addition, approaches to representing contradictory research statements are described. The SenseLab ontologies are designed for use on the Semantic Web that enables their integration into a growing collection of biomedical information resources. We demonstrate that our approach can yield significant potential benefits and that the Semantic Web is rapidly becoming mature enough to realize its anticipated promises. The ontologies are available online at http://neuroweb.med.yale.edu/senselab/. 2009 Elsevier B.V. All rights reserved.

SLIMS--a user-friendly sample operations and inventory management system for genotyping labs.

PubMed

Van Rossum, Thea; Tripp, Ben; Daley, Denise

2010-07-15

We present the Sample-based Laboratory Information Management System (SLIMS), a powerful and user-friendly open source web application that provides all members of a laboratory with an interface to view, edit and create sample information. SLIMS aims to simplify common laboratory tasks with tools such as a user-friendly shopping cart for subjects, samples and containers that easily generates reports, shareable lists and plate designs for genotyping. Further key features include customizable data views, database change-logging and dynamically filled pre-formatted reports. Along with being feature-rich, SLIMS' power comes from being able to handle longitudinal data from multiple time-points and biological sources. This type of data is increasingly common from studies searching for susceptibility genes for common complex diseases that collect thousands of samples generating millions of genotypes and overwhelming amounts of data. LIMSs provide an efficient way to deal with this data while increasing accessibility and reducing laboratory errors; however, professional LIMS are often too costly to be practical. SLIMS gives labs a feasible alternative that is easily accessible, user-centrically designed and feature-rich. To facilitate system customization, and utilization for other groups, manuals have been written for users and developers. Documentation, source code and manuals are available at http://genapha.icapture.ubc.ca/SLIMS/index.jsp. SLIMS was developed using Java 1.6.0, JSPs, Hibernate 3.3.1.GA, DB2 and mySQL, Apache Tomcat 6.0.18, NetBeans IDE 6.5, Jasper Reports 3.5.1 and JasperSoft's iReport 3.5.1.

Towards a Computable Data Corpus of Temporal Correlations between Drug Administration and Lab Value Changes

PubMed Central

Newe, Axel; Wimmer, Stefan; Neubert, Antje; Becker, Linda; Prokosch, Hans-Ulrich; Ganslandt, Thomas

2015-01-01

Background The analysis of electronic health records for an automated detection of adverse drug reactions is an approach to solve the problems that arise from traditional methods like spontaneous reporting or manual chart review. Algorithms addressing this task should be modeled on the criteria for a standardized case causality assessment defined by the World Health Organization. One of these criteria is the temporal relationship between drug intake and the occurrence of a reaction or a laboratory test abnormality. Appropriate data that would allow for developing or validating related algorithms is not publicly available, though. Methods In order to provide such data, retrospective routine data of drug administrations and temporally corresponding laboratory observations from a university clinic were extracted, transformed and evaluated by experts in terms of a reasonable time relationship between drug administration and lab value alteration. Result The result is a data corpus of 400 episodes of normalized laboratory parameter values in temporal context with drug administrations. Each episode has been manually classified whether it contains data that might indicate a temporal correlation between the drug administration and the change of the lab value course, whether such a change is not observable or whether a decision between those two options is not possible due to the data. In addition, each episode has been assigned a concordance value which indicates how difficult it is to assess. This is the first open data corpus of a computable ground truth of temporal correlations between drug administration and lab value alterations. Discussion The main purpose of this data corpus is the provision of data for further research and the provision of a ground truth which allows for comparing the outcome of other assessments of this data with the outcome of assessments made by human experts. It can serve as a contribution towards systematic, computerized ADR detection in

Physical-level synthesis for digital lab-on-a-chip considering variation, contamination, and defect.

PubMed

Liao, Chen; Hu, Shiyan

2014-03-01

Microfluidic lab-on-a-chips have been widely utilized in biochemical analysis and human health studies due to high detection accuracy, high timing efficiency, and low cost. The increasing design complexity of lab-on-a-chips necessitates the computer-aided design (CAD) methodology in contrast to the classical manual design methodology. A key part in lab-on-a-chip CAD is physical-level synthesis. It includes the lab-on-a-chip placement and routing, where placement is to determine the physical location and the starting time of each operation and routing is to transport each droplet from the source to the destination. In the lab-on-a-chip design, variation, contamination, and defect need to be considered. This work designs a physical-level synthesis flow which simultaneously considers variation, contamination, and defect of the lab-on-a-chip design. It proposes a maze routing based, variation, contamination, and defect aware droplet routing technique, which is seamlessly integrated into an existing placement technique. The proposed technique improves the placement solution for routing and achieves the placement and routing co-optimization to handle variation, contamination, and defect. The simulation results demonstrate that our technique does not use any defective/contaminated grids, while the technique without considering contamination and defect uses 17.0% of the defective/contaminated grids on average. In addition, our routing variation aware technique significantly improves the average routing yield by 51.2% with only 3.5% increase in completion time compared to a routing variation unaware technique.

Quality indexing with computer-aided lexicography

NASA Technical Reports Server (NTRS)

Buchan, Ronald L.

1992-01-01

Indexing with computers is a far cry from indexing with the first indexing tool, the manual card sorter. With the aid of computer-aided lexicography, both indexing and indexing tools can provide standardization, consistency, and accuracy, resulting in greater quality control than ever before. A brief survey of computer activity in indexing is presented with detailed illustrations from NASA activity. Applications from techniques mentioned, such as Retrospective Indexing (RI), can be made to many indexing systems. In addition to improving the quality of indexing with computers, the improved efficiency with which certain tasks can be done is demonstrated.

ERIC Indexing Handbook (Clearinghouse Indexing Practices). ERIC Processing Manual, Appendix C.

ERIC Educational Resources Information Center

Barnett, Lynn, Ed.; Houston, Jim, Ed.

Subject indexing in ERIC is performed by subject specialists across 16 geographically dispersed ERIC Clearinghouses, each responsible for a different niche or aspect of educational information. This phenomenon, combined with the broadness of the education field and variability of terminology therein, has led to the development at the…

Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 14. Appendix I: Communicating with Deaf and Hearing Impaired Patients. Appendix II: Medical Terminology. Appendix III: EMS Organizations. Appendix IV: Legislation (Ohio). Glossary of Terms. Index. Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

This training manual for emergency medical technicians, one of 14 modules that comprise the Emergency Victim Care textbook, contains appendixes, a glossary, and an index. The first appendix is an article on communicating with deaf and hearing-impaired patients. Appendix 2, the largest section in this manual, is an introduction to medical…

Methods for semi-automated indexing for high precision information retrieval

NASA Technical Reports Server (NTRS)

Berrios, Daniel C.; Cucina, Russell J.; Fagan, Lawrence M.

2002-01-01

OBJECTIVE: To evaluate a new system, ISAID (Internet-based Semi-automated Indexing of Documents), and to generate textbook indexes that are more detailed and more useful to readers. DESIGN: Pilot evaluation: simple, nonrandomized trial comparing ISAID with manual indexing methods. Methods evaluation: randomized, cross-over trial comparing three versions of ISAID and usability survey. PARTICIPANTS: Pilot evaluation: two physicians. Methods evaluation: twelve physicians, each of whom used three different versions of the system for a total of 36 indexing sessions. MEASUREMENTS: Total index term tuples generated per document per minute (TPM), with and without adjustment for concordance with other subjects; inter-indexer consistency; ratings of the usability of the ISAID indexing system. RESULTS: Compared with manual methods, ISAID decreased indexing times greatly. Using three versions of ISAID, inter-indexer consistency ranged from 15% to 65% with a mean of 41%, 31%, and 40% for each of three documents. Subjects using the full version of ISAID were faster (average TPM: 5.6) and had higher rates of concordant index generation. There were substantial learning effects, despite our use of a training/run-in phase. Subjects using the full version of ISAID were much faster by the third indexing session (average TPM: 9.1). There was a statistically significant increase in three-subject concordant indexing rate using the full version of ISAID during the second indexing session (p < 0.05). SUMMARY: Users of the ISAID indexing system create complex, precise, and accurate indexing for full-text documents much faster than users of manual methods. Furthermore, the natural language processing methods that ISAID uses to suggest indexes contributes substantially to increased indexing speed and accuracy.

Methods for semi-automated indexing for high precision information retrieval.

PubMed

Berrios, Daniel C; Cucina, Russell J; Fagan, Lawrence M

2002-01-01

To evaluate a new system, ISAID (Internet-based Semi-automated Indexing of Documents), and to generate textbook indexes that are more detailed and more useful to readers. Pilot evaluation: simple, nonrandomized trial comparing ISAID with manual indexing methods. Methods evaluation: randomized, cross-over trial comparing three versions of ISAID and usability survey. Pilot evaluation: two physicians. Methods evaluation: twelve physicians, each of whom used three different versions of the system for a total of 36 indexing sessions. Total index term tuples generated per document per minute (TPM), with and without adjustment for concordance with other subjects; inter-indexer consistency; ratings of the usability of the ISAID indexing system. Compared with manual methods, ISAID decreased indexing times greatly. Using three versions of ISAID, inter-indexer consistency ranged from 15% to 65% with a mean of 41%, 31%, and 40% for each of three documents. Subjects using the full version of ISAID were faster (average TPM: 5.6) and had higher rates of concordant index generation. There were substantial learning effects, despite our use of a training/run-in phase. Subjects using the full version of ISAID were much faster by the third indexing session (average TPM: 9.1). There was a statistically significant increase in three-subject concordant indexing rate using the full version of ISAID during the second indexing session (p < 0.05). Users of the ISAID indexing system create complex, precise, and accurate indexing for full-text documents much faster than users of manual methods. Furthermore, the natural language processing methods that ISAID uses to suggest indexes contributes substantially to increased indexing speed and accuracy.

Methods for Semi-automated Indexing for High Precision Information Retrieval

PubMed Central

Berrios, Daniel C.; Cucina, Russell J.; Fagan, Lawrence M.

2002-01-01

Objective. To evaluate a new system, ISAID (Internet-based Semi-automated Indexing of Documents), and to generate textbook indexes that are more detailed and more useful to readers. Design. Pilot evaluation: simple, nonrandomized trial comparing ISAID with manual indexing methods. Methods evaluation: randomized, cross-over trial comparing three versions of ISAID and usability survey. Participants. Pilot evaluation: two physicians. Methods evaluation: twelve physicians, each of whom used three different versions of the system for a total of 36 indexing sessions. Measurements. Total index term tuples generated per document per minute (TPM), with and without adjustment for concordance with other subjects; inter-indexer consistency; ratings of the usability of the ISAID indexing system. Results. Compared with manual methods, ISAID decreased indexing times greatly. Using three versions of ISAID, inter-indexer consistency ranged from 15% to 65% with a mean of 41%, 31%, and 40% for each of three documents. Subjects using the full version of ISAID were faster (average TPM: 5.6) and had higher rates of concordant index generation. There were substantial learning effects, despite our use of a training/run-in phase. Subjects using the full version of ISAID were much faster by the third indexing session (average TPM: 9.1). There was a statistically significant increase in three-subject concordant indexing rate using the full version of ISAID during the second indexing session (p < 0.05). Summary. Users of the ISAID indexing system create complex, precise, and accurate indexing for full-text documents much faster than users of manual methods. Furthermore, the natural language processing methods that ISAID uses to suggest indexes contributes substantially to increased indexing speed and accuracy. PMID:12386114

e-Learning - Physics Labs

NASA Astrophysics Data System (ADS)

Mohottala, Hashini

2014-03-01

The general student population enrolled in any college level class is highly diverse. An increasing number of ``nontraditional'' students return to college and most of these students follow distance learning degree programs while engaging in their other commitments, work and family. However, those students tend to avoid taking science courses with labs, mostly because of the incapability of remotely completing the lab components in such courses. In order to address this issue, we have come across a method where introductory level physics labs can be taught remotely. In this process a lab kit with the critical lab components that can be easily accessible are conveniently packed into a box and distributed among students at the beginning of the semester. Once the students are given the apparatus they perform the experiments at home and gather data All communications with reference to the lab was done through an interactive user-friendly webpage - Wikispaces (WikiS). Students who create pages on WikiS can submit their lab write-ups, embed videos of the experiments they perform, post pictures and direct questions to the lab instructor. The students who are enrolled in the same lab can interact with each other through WikiS to discuss labs and even get assistance.

Aircrew Survival Equipmentman 3 & 2; Naval Training Command Rate Training Manual.

ERIC Educational Resources Information Center

Naval Training Command, Pensacola, FL.

The training manual is one of a series prepared for enlisted personnel of the Regular Navy and the Naval Reserve who are training for performance proficiency and studying for advancement in the Aircrew Survival Equipmentman (PR) rating. The illustrated and indexed manual focuses on the personnel parachute and other related survival equipment.…

18 CFR 401.105 - Indexes of certain records.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Indexes of certain... ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Public Access to Records and Information § 401.105 Indexes of certain records. (a) Indexes shall be maintained, and revised at least quarterly, for the...

LPT. Shield test facility (TAN645 and 646). Calibration lab shield ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LPT. Shield test facility (TAN-645 and -646). Calibration lab shield door. Ralph M. Parsons 1229-17 ANP/GE-6-645-MS-1. April 1957. Approved by INEEL Classification Office for public release. INEEL index code no. 037-0645-40-693-107369 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

The AASM scoring manual: a critical appraisal.

PubMed

Grigg-Damberger, Madeleine M

2009-11-01

Summarize recently published studies and critiques evaluating the effects of the American Academy of Sleep Medicine (AASM) Sleep Scoring Manual. Only a few retrospective studies have been published evaluating the new AASM Scoring Manual. These have shown that when scoring polysomnograms (PSGs) using the AASM rules compared to previous standards and guidelines: increased amount and percentage of sleep time in Non-Rapid Eye Movement Sleep (NREM) 1 (N1) and N3 sleep, and decreased NREM 2 (N2) sleep; improved interscorer reliability when scoring sleep stages in adults; large differences in apnea-hypopnea indexes (AHIs) using different hypopnea scoring definitions; and PSGs scored using the 'recommended' hypopnea definition in the new manual identified no significant sleep disordered breathing in 40% of lean individuals with symptomatic OSA (AHI ≥5/h by 1999 'Chicago' criteria) and a favorable response to treatment. Two years have passed since the AASM Scoring Manual was published, garnering less criticism than was feared by those who developed it. The improvement in interscorer reliability using the Manual is heartening since this goal shaped many of the choices made. The alternative hypopnea rule should be endorsed as a recommended option. The AASM Scoring Manual provides a foundation upon which we all can build rules and methods that quantify the complexity of sleep and its disorders. Multicenter validation and refinement of the Manual is encouraged.

Intelligent indexing: a semi-automated, trainable system for field labeling

NASA Astrophysics Data System (ADS)

Clawson, Robert; Barrett, William

2015-01-01

We present Intelligent Indexing: a general, scalable, collaborative approach to indexing and transcription of non-machinereadable documents that exploits visual consensus and group labeling while harnessing human recognition and domain expertise. In our system, indexers work directly on the page, and with minimal context switching can navigate the page, enter labels, and interact with the recognition engine. Interaction with the recognition engine occurs through preview windows that allow the indexer to quickly verify and correct recommendations. This interaction is far superior to conventional, tedious, inefficient post-correction and editing. Intelligent Indexing is a trainable system that improves over time and can provide benefit even without prior knowledge. A user study was performed to compare Intelligent Indexing to a basic, manual indexing system. Volunteers report that using Intelligent Indexing is less mentally fatiguing and more enjoyable than the manual indexing system. Their results also show that it reduces significantly (30.2%) the time required to index census records, while maintaining comparable accuracy. (a video demonstration is available at http://youtube.com/gqdVzEPnBEw)

A Comparative Study on Real Lab and Simulation Lab in Communication Engineering from Students' Perspectives

ERIC Educational Resources Information Center

Balakrishnan, B.; Woods, P. C.

2013-01-01

Over the years, rapid development in computer technology has engendered simulation-based laboratory (lab) in addition to the traditional hands-on (physical) lab. Many higher education institutions adopt simulation lab, replacing some existing physical lab experiments. The creation of new systems for conducting engineering lab activities has raised…

Kinematic Labs with Mobile Devices

NASA Astrophysics Data System (ADS)

Kinser, Jason M.

2015-07-01

This book provides 13 labs spanning the common topics in the first semester of university-level physics. Each lab is designed to use only the student's smartphone, laptop and items easily found in big-box stores or a hobby shop. Each lab contains theory, set-up instructions and basic analysis techniques. All of these labs can be performed outside of the traditional university lab setting and initial costs averaging less than 8 per student, per lab.

MethLAB

PubMed Central

Kilaru, Varun; Barfield, Richard T; Schroeder, James W; Smith, Alicia K

2012-01-01

Recent evidence suggests that DNA methylation changes may underlie numerous complex traits and diseases. The advent of commercial, array-based methods to interrogate DNA methylation has led to a profusion of epigenetic studies in the literature. Array-based methods, such as the popular Illumina GoldenGate and Infinium platforms, estimate the proportion of DNA methylated at single-base resolution for thousands of CpG sites across the genome. These arrays generate enormous amounts of data, but few software resources exist for efficient and flexible analysis of these data. We developed a software package called MethLAB (http://genetics.emory.edu/conneely/MethLAB) using R, an open source statistical language that can be edited to suit the needs of the user. MethLAB features a graphical user interface (GUI) with a menu-driven format designed to efficiently read in and manipulate array-based methylation data in a user-friendly manner. MethLAB tests for association between methylation and relevant phenotypes by fitting a separate linear model for each CpG site. These models can incorporate both continuous and categorical phenotypes and covariates, as well as fixed or random batch or chip effects. MethLAB accounts for multiple testing by controlling the false discovery rate (FDR) at a user-specified level. Standard output includes a spreadsheet-ready text file and an array of publication-quality figures. Considering the growing interest in and availability of DNA methylation data, there is a great need for user-friendly open source analytical tools. With MethLAB, we present a timely resource that will allow users with no programming experience to implement flexible and powerful analyses of DNA methylation data. PMID:22430798

Teachers' Perspectives on Online Virtual Labs vs. Hands-On Labs in High School Science

NASA Astrophysics Data System (ADS)

Bohr, Teresa M.

This study of online science teachers' opinions addressed the use of virtual labs in online courses. A growing number of schools use virtual labs that must meet mandated laboratory standards to ensure they provide learning experiences comparable to hands-on labs, which are an integral part of science curricula. The purpose of this qualitative case study was to examine teachers' perceptions of the quality and effectiveness of high school virtual labs. The theoretical foundation was constructivism, as labs provide student-centered activities for problem solving, inquiry, and exploration of phenomena. The research questions focused on experienced teachers' perceptions of the quality of virtual vs. hands-on labs. Data were collected through survey questions derived from the lab objectives of The Next Generation Science Standards . Eighteen teachers rated the degree of importance of each objective and also rated how they felt virtual labs met these objectives; these ratings were reported using descriptive statistics. Responses to open-ended questions were few and served to illustrate the numerical results. Many teachers stated that virtual labs are valuable supplements but could not completely replace hands-on experiences. Studies on the quality and effectiveness of high school virtual labs are limited despite widespread use. Comprehensive studies will ensure that online students have equal access to quality labs. School districts need to define lab requirements, and colleges need to specify the lab experience they require. This study has potential to inspire positive social change by assisting science educators, including those in the local school district, in evaluating and selecting courseware designed to promote higher order thinking skills, real-world problem solving, and development of strong inquiry skills, thereby improving science instruction for all high school students.

Comparing the effects of manual therapy versus electrophysical agents in the management of knee osteoarthritis.

PubMed

Ali, Syed Shahzad; Ahmed, Syed Imran; Khan, Muhammad; Soomro, Rabail Rani

2014-07-01

To evaluate the effectiveness of Manual Therapy in comparison to Electrophysical agents in Knee Osteoarthritis. Total 50 patients with knee osteoarthritis were recruited from OPD of orthopedics civil hospital and Institute Of Physical Medicine & Rehabilitation, Dow University of Health Sciences Karachi. All those patients who fulfilled inclusion criteria were selected on voluntary basis. Selected patients were equally divided and randomly assigned into two groups with age and gender matching. The Manual therapy group received program of Maitland joint mobilization whereas Electrophysical Agent group received a program of TENS and cold pack. Both group received a program of exercise therapy as well. Patients received 3 treatment sessions per week for 4 successive weeks. Clinical assessment was performed using WOMAC index at baseline and on 12th treatment session. Both study groups showed clinically and statistically considerable improvements in WOMAC index. However, Related 2 sample t-test showed better clinical results in Manual Therapy group (p = 0.000) than Electrophysical Agents group (p = 0.008). The mean improvement in total WOMAC index was relatively higher in Manual Therapy group (22.36 ± 13.91) than Electrophysical Agent group (9.72 ± 6.10). This study concluded that manual therapy is clinically more effective in decreasing pain, stiffness and improving physical function in knee osteoarthritis.

Autonomic changes induced by provocative motion in rats bred for high (HAB) and low (LAB) anxiety-related behavior: Paradoxical responses in LAB animals.

PubMed

Carnevali, Luca; Andrews, Paul L; Neumann, Inga D; Nalivaiko, Eugene; Sgoifo, Andrea

2016-12-01

In humans, associations between anxiety and nausea (including motion-induced) are reported but the underlying mechanisms are not known. Hypothermia is proposed to be an index of nausea in rats. Utilising hypothermia and heart rate as outcome measures we investigated the response to provocative motion in rats selectively bred for high (HAB) and low (LAB) anxiety-related behaviors and in non-selected (NAB) rats to further elucidate the potential relationship between hypothermia and nausea-like state. Core temperature and electrocardiogram were monitored in each group (n=10 per group) using telemetry, with or without circular motion (40min; 0.75Hz) and vehicle or diazepam (2mg/kg, i.p.) pre-treatment. Heart rate and time- and frequency-domain parameters of heart rate variability were derived from the electrocardiogram. There was no baseline difference in core temperature between the three groups (mean 38.0±0.1°C), but HAB animals had a significantly lower resting heart rate (330±7bpm) compared to LAB (402±5bpm) and NAB (401±9bpm). Animals in all groups exhibited hypothermia during motion (HAB: 36.3±0.1°C; NAB: 36.4±0.1°C; LAB: 34.9±0.2°C) with the magnitude (area under the curve, AUC) of the response during 40-min motion being greater in LAB compared to NAB and HAB rats, and this was also the case for the motion-induced bradycardia. Diazepam had minimal effects on baseline temperature and heart rate in all groups, but significantly reduced the hypothermia response (AUC) to motion in all groups by ~30%. Breeding for extremes in anxiety-related behavior unexpectedly selects animals with low trait anxiety that have enhanced bradycardia and hypothermic responses to motion; consequently, this animal model appears to be not suitable for exploring relationships between anxiety and autonomic correlates of nausea. Thermal and cardiovascular responses to motion were little different between HAB and NAB rats indicating that either hypothermia is not an index of a

Optofluidic two-dimensional grating volume refractive index sensor.

PubMed

Sarkar, Anirban; Shivakiran Bhaktha, B N; Khastgir, Sugata Pratik

2016-09-10

We present an optofluidic reservoir with a two-dimensional grating for a lab-on-a-chip volume refractive index sensor. The observed diffraction pattern from the device resembles the analytically obtained fringe pattern. The change in the diffraction pattern has been monitored in the far-field for fluids with different refractive indices. Reliable measurements of refractive index variations, with an accuracy of 6×10^-3 refractive index units, for different fluids establishes the optofluidic device as a potential on-chip tool for monitoring dynamic refractive index changes.

TangoLab-2 Card Troubleshooting

NASA Image and Video Library

2017-10-17

iss053e105442 (Oct. 17, 2017) --- Flight Engineer Mark Vande Hei swaps out a payload card from the TangoLab-1 facility and places into the TangoLab-2 facility. TangoLab provides a standardized platform and open architecture for experimental modules called CubeLabs. CubeLab modules may be developed for use in 3-dimensional tissue and cell cultures.

A comparative study on real lab and simulation lab in communication engineering from students' perspectives

NASA Astrophysics Data System (ADS)

Balakrishnan, B.; Woods, P. C.

2013-05-01

Over the years, rapid development in computer technology has engendered simulation-based laboratory (lab) in addition to the traditional hands-on (physical) lab. Many higher education institutions adopt simulation lab, replacing some existing physical lab experiments. The creation of new systems for conducting engineering lab activities has raised concerns among educators on the merits and shortcomings of both physical and simulation labs; at the same time, many arguments have been raised on the differences of both labs. Investigating the effectiveness of both labs is complicated, as there are multiple factors that should be considered. In view of this challenge, a study on students' perspectives on their experience related to key aspects on engineering laboratory exercise was conducted. In this study, the Visual Auditory Read and Kinetic model was utilised to measure the students' cognitive styles. The investigation was done through a survey among participants from Multimedia University, Malaysia. The findings revealed that there are significant differences for most of the aspects in physical and simulation labs.

A Constructivist Cloud Lab.

ERIC Educational Resources Information Center

Emery, Dave

1996-01-01

Describes a lab involving a cloud formation activity that uses the constructivist learning model to get students more involved in creating the lab. Enables students to develop a greater understanding of the concepts involved and more interest in the lab's outcomes. (JRH)

Virtual Reality Lab Assistant

NASA Technical Reports Server (NTRS)

Saha, Hrishikesh; Palmer, Timothy A.

1996-01-01

Virtual Reality Lab Assistant (VRLA) demonstration model is aligned for engineering and material science experiments to be performed by undergraduate and graduate students in the course as a pre-lab simulation experience. This will help students to get a preview of how to use the lab equipment and run experiments without using the lab hardware/software equipment. The quality of the time available for laboratory experiments can be significantly improved through the use of virtual reality technology.

Effectiveness of sequential automatic-manual home respiratory polygraphy scoring.

PubMed

Masa, Juan F; Corral, Jaime; Pereira, Ricardo; Duran-Cantolla, Joaquin; Cabello, Marta; Hernández-Blasco, Luis; Monasterio, Carmen; Alonso-Fernandez, Alberto; Chiner, Eusebi; Vázquez-Polo, Francisco-José; Montserrat, Jose M

2013-04-01

Automatic home respiratory polygraphy (HRP) scoring functions can potentially confirm the diagnosis of sleep apnoea-hypopnoea syndrome (SAHS) (obviating technician scoring) in a substantial number of patients. The result would have important management and cost implications. The aim of this study was to determine the diagnostic cost-effectiveness of a sequential HRP scoring protocol (automatic and then manual for residual cases) compared with manual HRP scoring, and with in-hospital polysomnography. We included suspected SAHS patients in a multicentre study and assigned them to home and hospital protocols at random. We constructed receiver operating characteristic (ROC) curves for manual and automatic scoring. Diagnostic agreement for several cut-off points was explored and costs for two equally effective alternatives were calculated. Of 366 randomised patients, 348 completed the protocol. Manual scoring produced better ROC curves than automatic scoring. There was no sensitive automatic or subsequent manual HRP apnoea-hypopnoea index (AHI) cut-off point. The specific cut-off points for automatic and subsequent manual HRP scorings (AHI >25 and >20, respectively) had a specificity of 93% for automatic and 94% for manual scorings. The costs of manual protocol were 9% higher than sequential HRP protocol; these were 69% and 64%, respectively, of the cost of the polysomnography. A sequential HRP scoring protocol is a cost-effective alternative to polysomnography, although with limited cost savings compared to HRP manual scoring.

LabSkills

ERIC Educational Resources Information Center

O'Brien, Nick

2010-01-01

This article describes LabSkills, a revolutionary teaching tool to improve practical science in schools. LabSkills offers the chance to help improve the exposure that the average Key Stage 5 (age 16-19) student has to practical work. This is a huge area for development being highlighted by universities who are seeing a worryingly growing trend in…

ILLIAC 4 systems characteristics and programming manual

NASA Technical Reports Server (NTRS)

1973-01-01

The latest edition is presented of the Systems Characteristics and Programming Manual of the ILLIAC 4 array and parallel disc memory system. The major aspects of the array described include: the array systems characteristics, programming characteristics, definition and flow charts, and timing. A glossary of terms, and an instruction index are included.

7 CFR 900.502 - Indexes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Indexes. 900.502 Section 900.502 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Information Availability of Program Information, Staff Manuals and Instructions, and Related Material § 900...

Sustainable dual-use labs: neurovascular interventional capabilities within the cath lab.

PubMed

Lang, Stacey

2012-01-01

The inclusion of neurovascular interventional capabilities within the cath lab setting can be key to optimal utilization of resources, increased staff efficiency, and streamlined operations. When considering an expansion, look beyond the patient population traditionally associated with cardiac cath labs and consider the integration of programs outside cardiac alone--to create a true dual-use lab space. With proper planning, quality dual purpose equipment, appropriately trained staff, capable physicians, and strong leadership, an organization willing to embrace the challenge can build a truly extraordinary service.

18 CFR 401.105 - Indexes of certain records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Indexes of certain records. 401.105 Section 401.105 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Public Access to Records and Information § 401.105 Indexes...

Lab at Home: Hardware Kits for a Digital Design Lab

ERIC Educational Resources Information Center

Oliver, J. P.; Haim, F.

2009-01-01

An innovative laboratory methodology for an introductory digital design course is presented. Instead of having traditional lab experiences, where students have to come to school classrooms, a "lab at home" concept is proposed. Students perform real experiments in their own homes, using hardware kits specially developed for this purpose. They…

A comparison of the efficacy of powered and manual toothbrushes in controlling plaque and gingivitis: a clinical study

PubMed Central

Jain, Yashika

2013-01-01

Background Plaque is intimately related to the production and progress of dental caries and inflammatory gingival and periodontal diseases. Good plaque control facilitates the return to health for patients with gingival and periodontal diseases. Daily use of a toothbrush and other oral hygiene aids is the most dependable way to achieve oral health benefits for all patients. Methods A randomized clinical trial was conducted to compare the efficacy of a powered toothbrush with a manual toothbrush in controlling plaque and gingivitis over a 6-week period. The sample consisted of 60 dental students of both sexes, with ages ranging from 18 to 28 years. The samples were stratified and randomly divided into two groups of 30 by a second examiner using the coin toss method; one group used a manual toothbrush and the other group used a powered toothbrush. Each participant’s gingival index, plaque index and oral hygiene index were assessed on the seventh, 14th, and 45th days on the basis of the assigned toothbrush. Collected data were analyzed and different subgroups were compared using Student’s t-test. Results A paired t-test revealed a highly significant reduction in the gingival, plaque, and oral hygiene index scores of the manual and powered groups at the first, second, and sixth weeks (P-value < 0.0001). An unpaired t-test revealed a significant reduction between the plaque index scores of the manual and powered groups at the second week (P-value < 0.05). Another unpaired t-test revealed a highly significant reduction between the plaque index scores of the manual and powered groups at the sixth week (P-value < 0.0001). Conclusion The subject group using the powered toothbrush demonstrated clinical and statistical improvement in overall plaque scores. Powered toothbrushes offer an individual the ability to brush the teeth in a way that is optimal in terms of removing plaque and improving gingival health, conferring good brushing technique on all who use them

The Design of Integrated Information System for High Voltage Metering Lab

NASA Astrophysics Data System (ADS)

Ma, Yan; Yang, Yi; Xu, Guangke; Gu, Chao; Zou, Lida; Yang, Feng

2018-01-01

With the development of smart grid, intelligent and informatization management of high-voltage metering lab become increasingly urgent. In the paper we design an integrated information system, which automates the whole transactions from accepting instruments, make experiments, generating report, report signature to instrument claims. Through creating database for all the calibrated instruments, using two-dimensional code, integrating report templates in advance, establishing bookmarks and online transmission of electronical signatures, our manual procedures reduce largely. These techniques simplify the complex process of account management and report transmission. After more than a year of operation, our work efficiency improves about forty percent averagely, and its accuracy rate and data reliability are much higher as well.

Research on Modeling Technology of Virtual Robot Based on LabVIEW

NASA Astrophysics Data System (ADS)

Wang, Z.; Huo, J. L.; Y Sun, L.; Y Hao, X.

2017-12-01

Because of the dangerous working environment, the underwater operation robot for nuclear power station needs manual teleoperation. In the process of operation, it is necessary to guide the position and orientation of the robot in real time. In this paper, the geometric modeling of the virtual robot and the working environment is accomplished by using SolidWorks software, and the accurate modeling and assembly of the robot are realized. Using LabVIEW software to read the model, and established the manipulator forward kinematics and inverse kinematics model, and realized the hierarchical modeling of virtual robot and computer graphics modeling. Experimental results show that the method studied in this paper can be successfully applied to robot control system.

LCOGT Imaging Lab

NASA Astrophysics Data System (ADS)

Tufts, Joseph R.; Lobdill, Rich; Haldeman, Benjamin J.; Haynes, Rachel; Hawkins, Eric; Burleson, Ben; Jahng, David

2008-07-01

The Las Cumbres Observatory Global Telescope Network (LCOGT) is an ambitious project to build and operate, within 5 years, a worldwide robotic network of 50 0.4, 1, and 2 m telescopes sharing identical instrumentation and optimized for precision photometry of time-varying sources. The telescopes, instrumentation, and software are all developed in house with two 2 m telescopes already installed. The LCOGT Imaging Lab is responsible for assembly and characterization of the network's cameras and instrumentation. In addition to a fully equipped CNC machine shop, two electronics labs, and a future optics lab, the Imaging Lab is designed from the ground up to be a superb environment for bare detectors, precision filters, and assembled instruments. At the heart of the lab is an ISO class 5 cleanroom with full ionization. Surrounding this, the class 7 main lab houses equipment for detector characterization including QE and CTE, and equipment for measuring transmission and reflection of optics. Although the first science cameras installed, two TEC cooled e2v 42-40 deep depletion based units and two CryoTiger cooled Fairchild Imaging CCD486-BI based units, are from outside manufacturers, their 18 position filter wheels and the remainder of the network's science cameras, controllers, and instrumentation will be built in house. Currently being designed, the first generation LCOGT cameras for the network's 1 m telescopes use existing CCD486-BI devices and an in-house controller. Additionally, the controller uses digital signal processing to optimize readout noise vs. speed, and all instrumentation uses embedded microprocessors for communication over ethernet.

A MANUAL OF JAPANESE WRITING, BOOK 3.

ERIC Educational Resources Information Center

CHAPLIN, HAMAKO ITO; MARTIN, SAMUEL E.

INTENDED FOR USE WITH BOOKS 1 AND 2 OF THIS MANUAL, THIS VOLUME LISTS AND INDEXES THE 881 JAPANESE "EDUCATION CHARACTERS" PRESENTED IN THE TEXT LESSONS. THE CHARACTERS (KANJI) ARE LISTED IN ORDER AS THEY APPEAR IN THE LESSONS AND EACH CHARACTER IS GIVEN SEVERAL NUMBERS--THE NUMBER USED BY THE EDUCATION MINISTRY IN ITS GRADED LIST FOR…

The clinical applicability of an automated plethysmographic determination of the ankle-brachial index after vascular surgery.

PubMed

van der Slegt, Jasper; Verbogt, Nathalie Pa; Mulder, Paul Gh; Steunenberg, Stijn L; Steunenberg, Bastiaan E; van der Laan, Lijckle

2016-10-01

An automated ankle-brachial index device could lead to potential time savings and more accuracy in ankle-brachial index-determination after vascular surgery. This prospective cross-sectional study compared postprocedural ankle-brachial indices measured by a manual method with ankle-brachial indices of an automated plethysmographic method. Forty-two patients were included. No significant difference in time performing a measurement was observed (1.1 min, 95% CI: -0.2 to +2.4; P = 0.095). Mean ankle-brachial index with the automated method was 0.105 higher (95% CI: 0.017 to 0.193; P = 0.020) than with the manual method, with limits of agreement of -0.376 and +0.587. Total variance amounted to 0.0759 and the correlation between both methods was 0.60. Reliability expressed as maximum absolute difference (95% level) between duplicate ankle-brachial index-measurements under identical conditions was 0.350 (manual) and 0.152 (automated), although not significant (p = 0.053). Finally, the automated method had 34% points higher failure rate than the manual method. In conclusion based on this study, the automated ankle-brachial index-method seems not to be clinically applicable for measuring ankle-brachial index postoperatively in patients with vascular disease. © The Author(s) 2016.

Inexpensive DAQ based physics labs

NASA Astrophysics Data System (ADS)

Lewis, Benjamin; Clark, Shane

2015-11-01

Quality Data Acquisition (DAQ) based physics labs can be designed using microcontrollers and very low cost sensors with minimal lab equipment. A prototype device with several sensors and documentation for a number of DAQ-based labs is showcased. The device connects to a computer through Bluetooth and uses a simple interface to control the DAQ and display real time graphs, storing the data in .txt and .xls formats. A full device including a larger number of sensors combined with software interface and detailed documentation would provide a high quality physics lab education for minimal cost, for instance in high schools lacking lab equipment or students taking online classes. An entire semester’s lab course could be conducted using a single device with a manufacturing cost of under $20.

MatLab Script and Functional Programming

NASA Technical Reports Server (NTRS)

Shaykhian, Gholam Ali

2007-01-01

MatLab Script and Functional Programming: MatLab is one of the most widely used very high level programming languages for scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. The MatLab seminar covers the functional and script programming aspect of MatLab language. Specific expectations are: a) Recognize MatLab commands, script and function. b) Create, and run a MatLab function. c) Read, recognize, and describe MatLab syntax. d) Recognize decisions, loops and matrix operators. e) Evaluate scope among multiple files, and multiple functions within a file. f) Declare, define and use scalar variables, vectors and matrices.

7 CFR 1520.3 - Indexes/Record systems.

Code of Federal Regulations, 2011 CFR

2011-01-01

... systems. FAS regulations, manuals, and notices; attache reports; general publications; and statements of policy and procedures for various FAS programs. Copies of the FAS index may be obtained free of charge by...

7 CFR 1520.3 - Indexes/Record systems.

Code of Federal Regulations, 2010 CFR

2010-01-01

... systems. FAS regulations, manuals, and notices; attache reports; general publications; and statements of policy and procedures for various FAS programs. Copies of the FAS index may be obtained free of charge by...

7 CFR 1520.3 - Indexes/Record systems.

Code of Federal Regulations, 2014 CFR

2014-01-01

... systems. FAS regulations, manuals, and notices; attache reports; general publications; and statements of policy and procedures for various FAS programs. Copies of the FAS index may be obtained free of charge by...

7 CFR 1520.3 - Indexes/Record systems.

Code of Federal Regulations, 2013 CFR

2013-01-01

... systems. FAS regulations, manuals, and notices; attache reports; general publications; and statements of policy and procedures for various FAS programs. Copies of the FAS index may be obtained free of charge by...

7 CFR 1520.3 - Indexes/Record systems.

Code of Federal Regulations, 2012 CFR

2012-01-01

... systems. FAS regulations, manuals, and notices; attache reports; general publications; and statements of policy and procedures for various FAS programs. Copies of the FAS index may be obtained free of charge by...

Prediction of quantitative intrathoracic fluid volume to diagnose pulmonary oedema using LabVIEW.

PubMed

Urooj, Shabana; Khan, M; Ansari, A Q; Lay-Ekuakille, Aimé; Salhan, Ashok K

2012-01-01

Pulmonary oedema is a life-threatening disease that requires special attention in the area of research and clinical diagnosis. Computer-based techniques are rarely used to quantify the intrathoracic fluid volume (IFV) for diagnostic purposes. This paper discusses a software program developed to detect and diagnose pulmonary oedema using LabVIEW. The software runs on anthropometric dimensions and physiological parameters, mainly transthoracic electrical impedance (TEI). This technique is accurate and faster than existing manual techniques. The LabVIEW software was used to compute the parameters required to quantify IFV. An equation relating per cent control and IFV was obtained. The results of predicted TEI and measured TEI were compared with previously reported data to validate the developed program. It was found that the predicted values of TEI obtained from the computer-based technique were much closer to the measured values of TEI. Six new subjects were enrolled to measure and predict transthoracic impedance and hence to quantify IFV. A similar difference was also observed in the measured and predicted values of TEI for the new subjects.

Experiences with lab-centric instruction

NASA Astrophysics Data System (ADS)

Titterton, Nathaniel; Lewis, Colleen M.; Clancy, Michael J.

2010-06-01

Lab-centric instruction emphasizes supervised, hands-on activities by substituting lab for lecture time. It combines a multitude of pedagogical techniques into the format of an extended, structured closed lab. We discuss the range of benefits for students, including increased staff interaction, frequent and varied self-assessments, integrated collaborative activities, and a systematic sequence of activities that gradually increases in difficulty. Instructors also benefit from a deeper window into student progress and understanding. We follow with discussion of our experiences in courses at U.C. Berkeley, and using data from some of these investigate the effects of lab-centric instruction on student learning, procrastination, and course pacing. We observe that the lab-centric format helped students on exams but hurt them on extended programming assignments, counter to our hypothesis. Additionally, we see no difference in self-ratings of procrastination and limited differences in ratings of course pace. We do find evidence that the students who choose to attend lab-centric courses are different in several important ways from students who choose to attend the same course in a non-lab-centric format.

EarthLabs: A National Model for Earth Science Lab Courses

NASA Astrophysics Data System (ADS)

McDaris, J. R.; Dahlman, L.; Barstow, D.

2008-12-01

As a response to the need for more rigorous, inquiry-based high school Earth science courses, a coalition of scientists, educators, and five states have created EarthLabs, a set of pilot modules that can serve as a national model for lab-based science courses. The content of EarthLabs chapters focuses on Earth system science and environmental literacy and conforms to the National Science Education Standards as well as the states' curriculum frameworks. The effort is funded by NOAA's Environmental Literacy program. The pilot modules present activities on Corals, Drought, Fisheries, and Hurricanes. The Fisheries and Hurricanes units were reviewed and field-tested by educators in Texas and Arizona. The feedback from this evaluation led to revisions of these units and guided development of the Corals and Drought chapters. Each module consists of activities that use online data sets, satellite imagery, web-based readings, and hands-on laboratory experiments. The project comprises two separate websites, one for the instructor and one for students. The instructor's site contains the pedagogical underpinnings for each lab including teaching materials, assessment strategies, and the alignment of activities with state and national science standards. The student site provides access to all materials that students need to complete the activities or, in the case of the hands-on labs, where they access additional information to help extend their learning. There are also formative and summative questions embedded in the student webpages to help scaffold learning through the activities.

Improving the Quality of Lab Reports by Using Them as Lab Instructions

NASA Astrophysics Data System (ADS)

Haagen-Schuetzenhoefer, Claudia

2012-10-01

Lab exercises are quite popular in teaching science. Teachers have numerous goals in mind when teaching science laboratories. Nevertheless, empirical research draws a heterogeneous picture of the benefits of lab work. Research has shown that it does not necessarily contribute to the enhancement of practical abilities or content knowledge. Lab activities are frequently based on recipe-like, step-by-step instructions ("cookbook style"), which do not motivate students to engage cognitively. Consequently, students put the emphasis on "task completion" or "manipulating equipment."2

Lab Report Blues

ERIC Educational Resources Information Center

Diaz, Andrew

2004-01-01

For middle school students, writing a formal lab report can be challenging. For middle level teachers, reading students lab reports can be overwhelming. After grading report after report with incomplete procedures, incorrect graphs, and missing conclusions, the author's frustration level was at an all-time high. Ready to try anything, he thought,…

Reforming Cookbook Labs

ERIC Educational Resources Information Center

Peters, Erin

2005-01-01

Deconstructing cookbook labs to require the students to be more thoughtful could break down perceived teacher barriers to inquiry learning. Simple steps that remove or disrupt the direct transfer of step-by-step procedures in cookbook labs make students think more critically about their process. Through trials in the author's middle school…

Asphalt Raking. Instructor Manual. Trainee Manual.

ERIC Educational Resources Information Center

Laborers-AGC Education and Training Fund, Pomfret Center, CT.

This packet consists of the instructor and trainee manuals for an asphalt raking course. The instructor manual contains a course schedule for 4 days of instruction, content outline, and instructor outline. The trainee manual is divided into five sections: safety, asphalt basics, placing methods, repair and patching, and clean-up and maintenance.…

Stirling engine design manual, 2nd edition

NASA Technical Reports Server (NTRS)

Martini, W. R.

1983-01-01

This manual is intended to serve as an introduction to Stirling cycle heat engines, as a key to the available literature on Stirling engines and to identify nonproprietary Stirling engine design methodologies. Two different fully described Stirling engines are discussed. Engine design methods are categorized as first order, second order, and third order with increased order number indicating increased complexity. FORTRAN programs are listed for both an isothermal second order design program and an adiabatic second order design program. Third order methods are explained and enumerated. In this second edition of the manual the references are updated. A revised personal and corporate author index is given and an expanded directory lists over 80 individuals and companies active in Stirling engines.

Automatic indexing of scanned documents: a layout-based approach

NASA Astrophysics Data System (ADS)

Esser, Daniel; Schuster, Daniel; Muthmann, Klemens; Berger, Michael; Schill, Alexander

2012-01-01

Archiving official written documents such as invoices, reminders and account statements in business and private area gets more and more important. Creating appropriate index entries for document archives like sender's name, creation date or document number is a tedious manual work. We present a novel approach to handle automatic indexing of documents based on generic positional extraction of index terms. For this purpose we apply the knowledge of document templates stored in a common full text search index to find index positions that were successfully extracted in the past.

Status of chemistry lab safety in Nepal.

PubMed

Kandel, Krishna Prasad; Neupane, Bhanu Bhakta; Giri, Basant

2017-01-01

Chemistry labs can become a dangerous environment for students as the lab exercises involve hazardous chemicals, glassware, and equipment. Approximately one hundred thousand students take chemistry laboratory classes annually in Nepal. We conducted a survey on chemical lab safety issues across Nepal. In this paper, we assess the safety policy and equipment, protocols and procedures followed, and waste disposal in chemistry teaching labs. Significant population of the respondents believed that there is no monitoring of the lab safety in their lab (p<0.001). Even though many labs do not allow food and beverages inside lab and have first aid kits, they lack some basic safety equipment. There is no institutional mechanism to dispose lab waste and chemical waste is disposed haphazardly. Majority of the respondents believed that the safety training should be a part of educational training (p = 0.001) and they would benefit from short course and/or workshop on lab safety (p<0.001).

Status of chemistry lab safety in Nepal

PubMed Central

Kandel, Krishna Prasad; Neupane, Bhanu Bhakta

2017-01-01

Chemistry labs can become a dangerous environment for students as the lab exercises involve hazardous chemicals, glassware, and equipment. Approximately one hundred thousand students take chemistry laboratory classes annually in Nepal. We conducted a survey on chemical lab safety issues across Nepal. In this paper, we assess the safety policy and equipment, protocols and procedures followed, and waste disposal in chemistry teaching labs. Significant population of the respondents believed that there is no monitoring of the lab safety in their lab (p<0.001). Even though many labs do not allow food and beverages inside lab and have first aid kits, they lack some basic safety equipment. There is no institutional mechanism to dispose lab waste and chemical waste is disposed haphazardly. Majority of the respondents believed that the safety training should be a part of educational training (p = 0.001) and they would benefit from short course and/or workshop on lab safety (p<0.001). PMID:28644869

SenseLab

PubMed Central

Crasto, Chiquito J.; Marenco, Luis N.; Liu, Nian; Morse, Thomas M.; Cheung, Kei-Hoi; Lai, Peter C.; Bahl, Gautam; Masiar, Peter; Lam, Hugo Y.K.; Lim, Ernest; Chen, Huajin; Nadkarni, Prakash; Migliore, Michele; Miller, Perry L.; Shepherd, Gordon M.

2009-01-01

This article presents the latest developments in neuroscience information dissemination through the SenseLab suite of databases: NeuronDB, CellPropDB, ORDB, OdorDB, OdorMapDB, ModelDB and BrainPharm. These databases include information related to: (i) neuronal membrane properties and neuronal models, and (ii) genetics, genomics, proteomics and imaging studies of the olfactory system. We describe here: the new features for each database, the evolution of SenseLab’s unifying database architecture and instances of SenseLab database interoperation with other neuroscience online resources. PMID:17510162

Integrating Robotic Observatories into Astronomy Labs

NASA Astrophysics Data System (ADS)

Ruch, Gerald T.

2015-01-01

The University of St. Thomas (UST) and a consortium of five local schools is using the UST Robotic Observatory, housing a 17' telescope, to develop labs and image processing tools that allow easy integration of observational labs into existing introductory astronomy curriculum. Our lab design removes the burden of equipment ownership by sharing access to a common resource and removes the burden of data processing by automating processing tasks that are not relevant to the learning objectives.Each laboratory exercise takes place over two lab periods. During period one, students design and submit observation requests via the lab website. Between periods, the telescope automatically acquires the data and our image processing pipeline produces data ready for student analysis. During period two, the students retrieve their data from the website and perform the analysis. The first lab, 'Weighing Jupiter,' was successfully implemented at UST and several of our partner schools. We are currently developing a second lab to measure the age of and distance to a globular cluster.

Hepatoprotective effect of manual acupuncture at acupoint GB34 against CCl4-induced chronic liver damage in rats

PubMed Central

Yim, Yun-Kyoung; Lee, Hyun; Hong, Kwon-Eui; Kim, Young-Il; Lee, Byung-Ryul; Kim, Tae-Han; Yi, Ji-Young

2006-01-01

AIM: To investigate the hepatoprotective effect of manual acupuncture at Yanglingquan (GB34) on CCl4-induced chronic liver damage in rats. METHODS: Rats were injected intraperitoneally with CCl4 (1 mL/kg) and treated with manual acupuncture using reinforcing manipulation techniques at left GB34 (Yanglingquan) 3 times a week for 10 wk. A non-acupoint in left gluteal area was selected as a sham point. To estimate the hepatoprotective effect of manual acupuncture at GB34, measurement of liver index, biochemical assays including serum ALT, AST, ALP and total cholesterol, histological analysis and blood cell counts were conducted. RESULTS: Manual acupuncture at GB34 reduced the liver index, serum ALT, AST, ALP and total cholesterol levels as compared with the control group and the sham acupuncture group. It also increased and normalized the populations of WBC and lymphocytes. CONCLUSION: Manual acupuncture with reinforcing manipulation techniques at left GB34 reduces liver toxicity, protects liver function and liver tissue, and normalizes immune activity in CCl4-intoxicated rats. PMID:16610030

Improving the Quality of Lab Reports by Using Them as Lab Instructions

ERIC Educational Resources Information Center

Haagen-Schuetzenhoefer, Claudia

2012-01-01

Lab exercises are quite popular in teaching science. Teachers have numerous goals in mind when teaching science laboratories. Nevertheless, empirical research draws a heterogeneous picture of the benefits of lab work. Research has shown that it does not necessarily contribute to the enhancement of practical abilities or content knowledge. Lab…

Computational Labs Using VPython Complement Conventional Labs in Online and Regular Physics Classes

NASA Astrophysics Data System (ADS)

Bachlechner, Martina E.

2009-03-01

Fairmont State University has developed online physics classes for the high-school teaching certificate based on the text book Matter and Interaction by Chabay and Sherwood. This lead to using computational VPython labs also in the traditional class room setting to complement conventional labs. The computational modeling process has proven to provide an excellent basis for the subsequent conventional lab and allows for a concrete experience of the difference between behavior according to a model and realistic behavior. Observations in the regular class room setting feed back into the development of the online classes.

Association between heart rate variability and manual pulse rate.

PubMed

Hart, John

2013-09-01

One model for neurological assessment in chiropractic pertains to autonomic variability, tested commonly with heart rate variability (HRV). Since HRV may not be convenient to use on all patient visits, more user-friendly methods may help fill-in the gaps. Accordingly, this study tests the association between manual pulse rate and heart rate variability. The manual rates were also compared to the heart rate derived from HRV. Forty-eight chiropractic students were examined with heart rate variability (SDNN and mean heart rate) and two manual radial pulse rate measurements. Inclusion criteria consisted of participants being chiropractic students. Exclusion criteria for 46 of the participants consisted of a body mass index being greater than 30, age greater than 35, and history of: a) dizziness upon standing, b) treatment of psychiatric disorders, and c) diabetes. No exclusion criteria were applied to the remaining two participants who were also convenience sample volunteers. Linear associations between the manual pulse rate methods and the two heart rate variability measures (SDNN and mean heart) were tested with Pearson's correlation and simple linear regression. Moderate strength inverse (expected) correlations were observed between both manual pulse rate methods and SDNN (r = -0.640, 95% CI -0.781, -0.435; r = -0.632, 95% CI -0.776, -0.425). Strong direct (expected) relationships were observed between the manual pulse rate methods and heart rate derived from HRV technology (r = 0.934, 95% CI 0.885, 0.962; r = 0.941, 95% CI 0.897, 0.966). Manual pulse rates may be a useful option for assessing autonomic variability. Furthermore, this study showed a strong relationship between manual pulse rates and heart rate derived from HRV technology.

Spaceport Processing System Development Lab

NASA Technical Reports Server (NTRS)

Dorsey, Michael

2013-01-01

The Spaceport Processing System Development Lab (SPSDL), developed and maintained by the Systems Hardware and Engineering Branch (NE-C4), is a development lab with its own private/restricted networks. A private/restricted network is a network with restricted or no communication with other networks. This allows users from different groups to work on their own projects in their own configured environment without interfering with others utilizing their resources in the lab. The different networks being used in the lab have no way to talk with each other due to the way they are configured, so how a user configures his software, operating system, or the equipment doesn't interfere or carry over on any of the other networks in the lab. The SPSDL is available for any project in KSC that is in need of a lab environment. My job in the SPSDL was to assist in maintaining the lab to make sure it's accessible for users. This includes, but is not limited to, making sure the computers in the lab are properly running and patched with updated hardware/software. In addition to this, I also was to assist users who had issues in utilizing the resources in the lab, which may include helping to configure a restricted network for their own environment. All of this was to ensure workers were able to use the SPSDL to work on their projects without difficulty which would in turn, benefit the work done throughout KSC. When I wasn't working in the SPSDL, I would instead help other coworkers with smaller tasks which included, but wasn't limited to, the proper disposal, moving of, or search for essential equipment. I also, during the free time I had, used NASA's resources to increase my knowledge and skills in a variety of subjects related to my major as a computer engineer, particularly in UNIX, Networking, and Embedded Systems.

Management of Chronic Lateral Epicondylitis With Manual Therapy and Local Cryostimulation: A Pilot Study.

PubMed

Richer, Nadia; Marchand, Andrée-Anne; Descarreaux, Martin

2017-12-01

The purpose of this pilot study was to evaluate the feasibility and efficacy of adding cryostimulation to manual therapy in patients with chronic lateral epicondylitis. The control group (n = 19) was treated with manual therapy consisting of soft-tissue therapy and radial head mobilizations. The experimental group (n = 18) received cryostimulation in addition to manual therapy care similar to that for the control group. Both protocols consisted of 8 treatments over a 4-week period. Outcome measures included pain intensity (visual analog scale), pain-free grip strength (handheld dynamometer), and functional index (Patient-Rated Tennis Elbow Evaluation questionnaire). Assessments were performed at baseline, postintervention, and 3-month follow-up. Adherence and dropout rates were also considered. Both groups exhibited significant improvements in pain intensity and functional index at postintervention assessments, which were maintained at follow-up. All participants attended the prescribed number of treatments, but 27% were lost at follow-up. Minor adverse events were reported after cryostimulation in 4 cases. This study indicated that it is feasible to complete a clinical trial evaluating the efficacy of adding cryostimulation to manual therapy in patients with chronic lateral epicondylitis. On the basis of these preliminary data, the combination of cryostimulation and manual therapy care did not provide any additional benefits in both the short term and the long term. Manual myofascial point treatment and mobilization techniques yielded positive outcomes in chronic lateral epicondylitis. Further studies should focus on the sole therapeutic effect of cryostimulation in both patients with acute and those with chronic conditions.

Plant Biotech Lab Manual.

ERIC Educational Resources Information Center

Tant, Carl

This book provides laboratory experiments to enhance any food science/botany curriculum. Chapter 1, "Introduction," presents a survey of the techniques used in plant biotechnology laboratory procedures. Chapter 2, "Micronutrition," discusses media and nutritional requirements for tissue culture studies. Chapter 3, "Sterile Seeds," focuses on the…

Automatic inference of indexing rules for MEDLINE.

PubMed

Névéol, Aurélie; Shooshan, Sonya E; Claveau, Vincent

2008-11-19

Indexing is a crucial step in any information retrieval system. In MEDLINE, a widely used database of the biomedical literature, the indexing process involves the selection of Medical Subject Headings in order to describe the subject matter of articles. The need for automatic tools to assist MEDLINE indexers in this task is growing with the increasing number of publications being added to MEDLINE. In this paper, we describe the use and the customization of Inductive Logic Programming (ILP) to infer indexing rules that may be used to produce automatic indexing recommendations for MEDLINE indexers. Our results show that this original ILP-based approach outperforms manual rules when they exist. In addition, the use of ILP rules also improves the overall performance of the Medical Text Indexer (MTI), a system producing automatic indexing recommendations for MEDLINE. We expect the sets of ILP rules obtained in this experiment to be integrated into MTI.

The functional manual therapy intervention in infants with nonsynostotic plagiocephaly: a pilot study.

PubMed

Billi, Mariangela; Greco, Angelo; Colonneli, Paola; Volpi, Giordana; Valente, Donatella; Galeoto, Giovanni

2017-10-25

To document the evolution of cranial asymmetries in infants with signs of nonsynostotic occipital plagiocephaly (NSOP) who were undergo to many functional manual therapy treatments (in addition to the standard positioning recommendations) as well as to determine the feasibility of this methodology to conduct an outcome research investigating the impact of this intervention for infants with NSOP. Pilot clinical standardization project using pre-post design in which 10 infants participated. Nine infants presented an initial Oblique Diameter Difference Index (ODDI) over 104%, three an initial Ear Deviation Index (EDI) over 4%, and three a Cranial Proportional Index (CPI) over 90%. Infants received three functional manual therapy treatments for week during the first month of intervention and two ones for week during the second month. Plagiocephalometric measurememts were administered at the first assessment pre-intervention (T0), after 30 days (+/-5) (T1) and at a third time after 60 days (+/5) of treatment (T2). 9/10 participants showed a significant decrease in ODDI under 104% between T0 and T2 assessments. 5/10 infants showed an EDI under 4%, and 3/10 showed a value about 0%. 3/10 maintained their CPI over 90% with a considerable decrease. These clinical findings support the hypothesis that functional manual therapy treatments contribute to the improvement of cranial asymmetries in infants younger than 6.5 months old presenting with NSOP.

Parenting Stress Index: Manual, Administration Booklet, [and] Research Update.

ERIC Educational Resources Information Center

Abidin, Richard R.

The Parenting Stress Index (PSI) is a clinical and research self-report instrument (101 items) designed as a screening and diagnostic assessment technique to identify parent and child systems which are under stress, and in which deviant development of the child is likely to take place, or where dysfunctional parenting is likely to occur. The PSI…

GeneLab: Open Science For Exploration

NASA Technical Reports Server (NTRS)

Galazka, Jonathan

2018-01-01

The NASA GeneLab project capitalizes on multi-omic technologies to maximize the return on spaceflight experiments. The GeneLab project houses spaceflight and spaceflight-relevant multi-omics data in a publicly accessible data commons, and collaborates with NASA-funded principal investigators to maximize the omics data from spaceflight and spaceflight-relevant experiments. I will discuss the current status of GeneLab and give specific examples of how the GeneLab data system has been used to gain insight into how biology responds to spaceflight conditions.

A Museum Learning Lab

ERIC Educational Resources Information Center

Vandiver, Kathleen M.; Bijur, Jon Markowitz; Epstein, Ari W.; Rosenthal, Beryl; Stidsen, Don

2008-01-01

The "Learning Lab: The Cell" exhibit was developed by the Massachusetts Institute of Technology (MIT) Museum and the MIT Center for Environmental Health Sciences (CEHS). Specially designed for middle and high school students, the Learning Lab provides museum visitors of all ages with fascinating insights into how our living cells work. The…

Simulated Distribution Nitrification: Nitrification Index Evaluation and Viable AOB

EPA Science Inventory

Lab-scale reactors evaluated the impact of increasing temporal influent monochloramine (NH2Cl) concentrations (0.0 to 3.2 mg Cl2 L-1) and chlorine to nitrogen mass ratios (0:1 to 3.2:1) on nitrification, allowing evaluation of the recently proposed nitrification index (NI) for ch...

Lab-on a-Chip

NASA Technical Reports Server (NTRS)

2003-01-01

Helen Cole, the project manager for the Lab-on-a-Chip Applications Development program, and Lisa Monaco, the project scientist for the program, insert a lab on a chip into the Caliper 42 which is specialized equipment that controls processes on commercial chips to support development of lab-on-a-chip applications. The system has special microscopes and imaging systems, so scientists can process and study different types of fluid, chemical, and medical tests conducted on chips. For example, researchers have examined fluorescent bacteria as it flows through the chips' fluid channels or microfluidic capillaries. Researchers at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama, have been studying how the lab-on-a-chip technology can be used for microbial detection, water quality monitoring, and detecting biosignatures of past or present life on Mars. The Marshall Center team is also collaborating with scientists at other NASA centers and at universities to develop custom chip designs for not only space applications, but for many Earth applications, such as for detecting deadly microbes in heating and air systems. (NASA/MSFC/D.Stoffer)

Automatic inference of indexing rules for MEDLINE

PubMed Central

Névéol, Aurélie; Shooshan, Sonya E; Claveau, Vincent

2008-01-01

Background: Indexing is a crucial step in any information retrieval system. In MEDLINE, a widely used database of the biomedical literature, the indexing process involves the selection of Medical Subject Headings in order to describe the subject matter of articles. The need for automatic tools to assist MEDLINE indexers in this task is growing with the increasing number of publications being added to MEDLINE. Methods: In this paper, we describe the use and the customization of Inductive Logic Programming (ILP) to infer indexing rules that may be used to produce automatic indexing recommendations for MEDLINE indexers. Results: Our results show that this original ILP-based approach outperforms manual rules when they exist. In addition, the use of ILP rules also improves the overall performance of the Medical Text Indexer (MTI), a system producing automatic indexing recommendations for MEDLINE. Conclusion: We expect the sets of ILP rules obtained in this experiment to be integrated into MTI. PMID:19025687

ERLN Lab Compendium Fact Sheet

EPA Pesticide Factsheets

The Compendium is an online database of environmental testing laboratories nationwide. It enables labs to create profiles of their capabilities, so emergency responders can quickly identify a lab that will meet their support needs.

Physics Labs with Flavor

ERIC Educational Resources Information Center

Agrest, Mikhail M.

2009-01-01

This paper describes my attempts to look deeper into the so-called "shoot for your grade" labs, started in the '90s, when I began applying my teaching experience in Russia to introductory physics labs at the College of Charleston and other higher education institutions in South Carolina. The term "shoot for your grade" became popular among…

Making Real Virtual Labs

ERIC Educational Resources Information Center

Keller, Harry E.; Keller, Edward E.

2005-01-01

Francis Bacon began defining scientific methodology in the early 17th century, and secondary school science classes began to implement science labs in the mid-19th century. By the early 20th century, leading educators were suggesting that science labs be used to develop scientific thinking habits in young students, and at the beginning of the 21st…

NOT Another Lab Report

ERIC Educational Resources Information Center

Ende, Fred

2012-01-01

Ask students to name the aspects of science class they enjoy most, and working on labs will undoubtedly be mentioned. What often won't be included, however, is writing lab reports. For many students, the process of exploration and data collection is paramount, while the explanation and analysis of findings often takes a backseat. After all, if…

Are Virtual Labs as Effective as Hands-on Labs for Undergraduate Physics? A Comparative Study at Two Major Universities

ERIC Educational Resources Information Center

Darrah, Marjorie; Humbert, Roxann; Finstein, Jeanne; Simon, Marllin; Hopkins, John

2014-01-01

Most physics professors would agree that the lab experiences students have in introductory physics are central to the learning of the concepts in the course. It is also true that these physics labs require time and money for upkeep, not to mention the hours spent setting up and taking down labs. Virtual physics lab experiences can provide an…

Constructing a community-level amenity index

Treesearch

Joanna Paulson Ganning; Courtney G. Flint

2010-01-01

The study of amenity-driven regional change has proliferated in recent years, especially in the American West. While methods of quantifying amenity levels have progressed, they usually rely on traditional and inflexible methods of creating indices. This research note describes a method of manual indexing that allows a flexible and replicable way of assessing amenity...

Quartermaster 3 & 2. Rate Training Manual and Nonresident Career Course.

ERIC Educational Resources Information Center

Naval Education and Training Command, Pensacola, FL.

One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this self-study package provides subject matter that relates directly to the occupational qualifications of the Quartermaster rating. Contents include a 16-chapter text followed by a glossary, subject index, and the associated nonresident career…

The Development of MSFC Usability Lab

NASA Technical Reports Server (NTRS)

Cheng, Yiwei; Richardson, Sally

2010-01-01

This conference poster reviews the development of the usability lab at Marshall Space Flight Center. The purpose of the lab was to integrate a fully functioning usability laboratory to provide a resource for future human factor assessments. and to implement preliminary usability testing on a MSFC website to validate the functionality of the lab.

MeSH indexing based on automatically generated summaries.

PubMed

Jimeno-Yepes, Antonio J; Plaza, Laura; Mork, James G; Aronson, Alan R; Díaz, Alberto

2013-06-26

MEDLINE citations are manually indexed at the U.S. National Library of Medicine (NLM) using as reference the Medical Subject Headings (MeSH) controlled vocabulary. For this task, the human indexers read the full text of the article. Due to the growth of MEDLINE, the NLM Indexing Initiative explores indexing methodologies that can support the task of the indexers. Medical Text Indexer (MTI) is a tool developed by the NLM Indexing Initiative to provide MeSH indexing recommendations to indexers. Currently, the input to MTI is MEDLINE citations, title and abstract only. Previous work has shown that using full text as input to MTI increases recall, but decreases precision sharply. We propose using summaries generated automatically from the full text for the input to MTI to use in the task of suggesting MeSH headings to indexers. Summaries distill the most salient information from the full text, which might increase the coverage of automatic indexing approaches based on MEDLINE. We hypothesize that if the results were good enough, manual indexers could possibly use automatic summaries instead of the full texts, along with the recommendations of MTI, to speed up the process while maintaining high quality of indexing results. We have generated summaries of different lengths using two different summarizers, and evaluated the MTI indexing on the summaries using different algorithms: MTI, individual MTI components, and machine learning. The results are compared to those of full text articles and MEDLINE citations. Our results show that automatically generated summaries achieve similar recall but higher precision compared to full text articles. Compared to MEDLINE citations, summaries achieve higher recall but lower precision. Our results show that automatic summaries produce better indexing than full text articles. Summaries produce similar recall to full text but much better precision, which seems to indicate that automatic summaries can efficiently capture the most

MeSH indexing based on automatically generated summaries

PubMed Central

2013-01-01

Background MEDLINE citations are manually indexed at the U.S. National Library of Medicine (NLM) using as reference the Medical Subject Headings (MeSH) controlled vocabulary. For this task, the human indexers read the full text of the article. Due to the growth of MEDLINE, the NLM Indexing Initiative explores indexing methodologies that can support the task of the indexers. Medical Text Indexer (MTI) is a tool developed by the NLM Indexing Initiative to provide MeSH indexing recommendations to indexers. Currently, the input to MTI is MEDLINE citations, title and abstract only. Previous work has shown that using full text as input to MTI increases recall, but decreases precision sharply. We propose using summaries generated automatically from the full text for the input to MTI to use in the task of suggesting MeSH headings to indexers. Summaries distill the most salient information from the full text, which might increase the coverage of automatic indexing approaches based on MEDLINE. We hypothesize that if the results were good enough, manual indexers could possibly use automatic summaries instead of the full texts, along with the recommendations of MTI, to speed up the process while maintaining high quality of indexing results. Results We have generated summaries of different lengths using two different summarizers, and evaluated the MTI indexing on the summaries using different algorithms: MTI, individual MTI components, and machine learning. The results are compared to those of full text articles and MEDLINE citations. Our results show that automatically generated summaries achieve similar recall but higher precision compared to full text articles. Compared to MEDLINE citations, summaries achieve higher recall but lower precision. Conclusions Our results show that automatic summaries produce better indexing than full text articles. Summaries produce similar recall to full text but much better precision, which seems to indicate that automatic summaries can

EarthLabs Modules: Engaging Students In Extended, Rigorous Investigations Of The Ocean, Climate and Weather

NASA Astrophysics Data System (ADS)

Manley, J.; Chegwidden, D.; Mote, A. S.; Ledley, T. S.; Lynds, S. E.; Haddad, N.; Ellins, K.

2016-02-01

EarthLabs, envisioned as a national model for high school Earth or Environmental Science lab courses, is adaptable for both undergraduate middle school students. The collection includes ten online modules that combine to feature a global view of our planet as a dynamic, interconnected system, by engaging learners in extended investigations. EarthLabs support state and national guidelines, including the NGSS, for science content. Four modules directly guide students to discover vital aspects of the oceans while five other modules incorporate ocean sciences in order to complete an understanding of Earth's climate system. Students gain a broad perspective on the key role oceans play in fishing industry, droughts, coral reefs, hurricanes, the carbon cycle, as well as life on land and in the seas to drive our changing climate by interacting with scientific research data, manipulating satellite imagery, numerical data, computer visualizations, experiments, and video tutorials. Students explore Earth system processes and build quantitative skills that enable them to objectively evaluate scientific findings for themselves as they move through ordered sequences that guide the learning. As a robust collection, EarthLabs modules engage students in extended, rigorous investigations allowing a deeper understanding of the ocean, climate and weather. This presentation provides an overview of the ten curriculum modules that comprise the EarthLabs collection developed by TERC and found at http://serc.carleton.edu/earthlabs/index.html. Evaluation data on the effectiveness and use in secondary education classrooms will be summarized.

Manual physical therapy and perturbation exercises in knee osteoarthritis.

PubMed

Rhon, Daniel; Deyle, Gail; Gill, Norman; Rendeiro, Daniel

2013-11-01

Knee osteoarthritis (OA) causes disability among the elderly and is often associated with impaired balance and proprioception. Perturbation exercises may help improve these impairments. Although manual physical therapy is generally a well-tolerated treatment for knee OA, perturbation exercises have not been evaluated when used with a manual physical therapy approach. The purpose of this study was to observe tolerance to perturbation exercises and the effect of a manual physical therapy approach with perturbation exercises on patients with knee OA. This was a prospective observational cohort study of 15 patients with knee OA. The Western Ontario and McMaster Universities Arthritis Index (WOMAC), global rating of change (GROC), and 72-hour post-treatment tolerance were primary outcome measures. Patients received perturbation balance exercises along with a manual physical therapy approach, twice weekly for 4 weeks. Follow-up evaluation was done at 1, 3, and 6 months after beginning the program. Mean total WOMAC score significantly improved (P = 0.001) after the 4-week program (total WOMAC: initial, 105; 4 weeks, 56; 3 months, 54; 6 months, 57). Mean improvements were similar to previously published trials of manual physical therapy without perturbation exercises. The GROC score showed a minimal clinically important difference (MCID)≥+3 in 13 patients (87%) at 4 weeks, 12 patients (80%) at 3 months, and 9 patients (60%) at 6 months. No patients reported exacerbation of symptoms within 72 hours following each treatment session. A manual physical therapy approach that also included perturbation exercises was well tolerated and resulted in improved outcome scores in patients with knee OA.

Labs That Are a Blast.

ERIC Educational Resources Information Center

Hendrix, Laura

1996-01-01

Presents activities that use a simple homemade apparatus called "the cannon" to demonstrate Newton's Third Law. Reviews the chemistry concepts behind the ignition of the cannon and presents the Momentum Lab and the Projectile Motion Lab. (JRH)

Matched Index of Refraction Flow Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcllroy, Hugh

What's 27 feet long, 10 feet tall and full of mineral oil (3000 gallons' worth)? If you said INL's Matched Index of Refraction facility, give yourself a gold star. Scientists use computers to model the inner workings of nuclear reactors, and MIR helps validate those models. INL's Hugh McIlroy explains in this video. You can learn more about INL energy research at the lab's facebook site http://www.facebook.com/idahonationallaboratory.

Matched Index of Refraction Flow Facility

ScienceCinema

Mcllroy, Hugh

2018-01-08

What's 27 feet long, 10 feet tall and full of mineral oil (3000 gallons' worth)? If you said INL's Matched Index of Refraction facility, give yourself a gold star. Scientists use computers to model the inner workings of nuclear reactors, and MIR helps validate those models. INL's Hugh McIlroy explains in this video. You can learn more about INL energy research at the lab's facebook site http://www.facebook.com/idahonationallaboratory.

RoboLab and virtual environments

NASA Technical Reports Server (NTRS)

Giarratano, Joseph C.

1994-01-01

A useful adjunct to the manned space station would be a self-contained free-flying laboratory (RoboLab). This laboratory would have a robot operated under telepresence from the space station or ground. Long duration experiments aboard RoboLab could be performed by astronauts or scientists using telepresence to operate equipment and perform experiments. Operating the lab by telepresence would eliminate the need for life support such as food, water and air. The robot would be capable of motion in three dimensions, have binocular vision TV cameras, and two arms with manipulators to simulate hands. The robot would move along a two-dimensional grid and have a rotating, telescoping periscope section for extension in the third dimension. The remote operator would wear a virtual reality type headset to allow the superposition of computer displays over the real-time video of the lab. The operators would wear exoskeleton type arms to facilitate the movement of objects and equipment operation. The combination of video displays, motion, and the exoskeleton arms would provide a high degree of telepresence, especially for novice users such as scientists doing short-term experiments. The RoboLab could be resupplied and samples removed on other space shuttle flights. A self-contained RoboLab module would be designed to fit within the cargo bay of the space shuttle. Different modules could be designed for specific applications, i.e., crystal-growing, medicine, life sciences, chemistry, etc. This paper describes a RoboLab simulation using virtual reality (VR). VR provides an ideal simulation of telepresence before the actual robot and laboratory modules are constructed. The easy simulation of different telepresence designs will produce a highly optimum design before construction rather than the more expensive and time consuming hardware changes afterwards.

Seqcrawler: biological data indexing and browsing platform.

PubMed

Sallou, Olivier; Bretaudeau, Anthony; Roult, Aurelien

2012-07-24

Seqcrawler takes its roots in software like SRS or Lucegene. It provides an indexing platform to ease the search of data and meta-data in biological banks and it can scale to face the current flow of data. While many biological bank search tools are available on the Internet, mainly provided by large organizations to search their data, there is a lack of free and open source solutions to browse one's own set of data with a flexible query system and able to scale from a single computer to a cloud system. A personal index platform will help labs and bioinformaticians to search their meta-data but also to build a larger information system with custom subsets of data. The software is scalable from a single computer to a cloud-based infrastructure. It has been successfully tested in a private cloud with 3 index shards (pieces of index) hosting ~400 millions of sequence information (whole GenBank, UniProt, PDB and others) for a total size of 600 GB in a fault tolerant architecture (high-availability). It has also been successfully integrated with software to add extra meta-data from blast results to enhance users' result analysis. Seqcrawler provides a complete open source search and store solution for labs or platforms needing to manage large amount of data/meta-data with a flexible and customizable web interface. All components (search engine, visualization and data storage), though independent, share a common and coherent data system that can be queried with a simple HTTP interface. The solution scales easily and can also provide a high availability infrastructure.

Virtual Labs and Virtual Worlds

NASA Astrophysics Data System (ADS)

Boehler, Ted

2006-12-01

Virtual Labs and Virtual Worlds Coastline Community College has under development several virtual lab simulations and activities that range from biology, to language labs, to virtual discussion environments. Imagine a virtual world that students enter online, by logging onto their computer from home or anywhere they have web access. Upon entering this world they select a personalized identity represented by a digitized character (avatar) that can freely move about, interact with the environment, and communicate with other characters. In these virtual worlds, buildings, gathering places, conference rooms, labs, science rooms, and a variety of other “real world” elements are evident. When characters move about and encounter other people (players) they may freely communicate. They can examine things, manipulate objects, read signs, watch video clips, hear sounds, and jump to other locations. Goals of critical thinking, social interaction, peer collaboration, group support, and enhanced learning can be achieved in surprising new ways with this innovative approach to peer-to-peer communication in a virtual discussion world. In this presentation, short demos will be given of several online learning environments including a virtual biology lab, a marine science module, a Spanish lab, and a virtual discussion world. Coastline College has been a leader in the development of distance learning and media-based education for nearly 30 years and currently offers courses through PDA, Internet, DVD, CD-ROM, TV, and Videoconferencing technologies. Its distance learning program serves over 20,000 students every year. sponsor Jerry Meisner

Three-dimensional femtosecond laser processing for lab-on-a-chip applications

NASA Astrophysics Data System (ADS)

Sima, Felix; Sugioka, Koji; Vázquez, Rebeca Martínez; Osellame, Roberto; Kelemen, Lóránd; Ormos, Pal

2018-02-01

The extremely high peak intensity associated with ultrashort pulse width of femtosecond laser allows us to induce nonlinear interaction such as multiphoton absorption and tunneling ionization with materials that are transparent to the laser wavelength. More importantly, focusing the femtosecond laser beam inside the transparent materials confines the nonlinear interaction only within the focal volume, enabling three-dimensional (3D) micro- and nanofabrication. This 3D capability offers three different schemes, which involve undeformative, subtractive, and additive processing. The undeformative processing preforms internal refractive index modification to construct optical microcomponents including optical waveguides. Subtractive processing can realize the direct fabrication of 3D microfluidics, micromechanics, microelectronics, and photonic microcomponents in glass. Additive processing represented by two-photon polymerization enables the fabrication of 3D polymer micro- and nanostructures for photonic and microfluidic devices. These different schemes can be integrated to realize more functional microdevices including lab-on-a-chip devices, which are miniaturized laboratories that can perform reaction, detection, analysis, separation, and synthesis of biochemical materials with high efficiency, high speed, high sensitivity, low reagent consumption, and low waste production. This review paper describes the principles and applications of femtosecond laser 3D micro- and nanofabrication for lab-on-a-chip applications. A hybrid technique that promises to enhance functionality of lab-on-a-chip devices is also introduced.

Diet manuals to practice manuals: the evolution of nutrition care.

PubMed

Chima, Cinda S

2007-02-01

Although the role of nutrition as a therapy for the sick has been recognized for centuries, the science of nutrition is a relatively young discipline. The first modern attempt to document and standardize appropriate nutrition care was the diet manual. The evolution from "diet manual" to "practice manual" is less a change in purpose than an expansion of scope. This paper reviews the history of diet manuals in the United States, focusing on the evolution of nutrition therapy and the transformation of diet manuals into practice manuals for nutrition care providers. Included is a practice-oriented summary of 7 diet manuals published by Cleveland Metropolitan General Hospital in Cleveland from 1939 to 1984, when the hospital began using nationally distributed practice manuals. These manuals exemplify changes in the practice of medicine and in the role of nutrition providers on the healthcare team. A review of the evolution of clinical decision-making as documented in diet and practice manuals reflects increasing rigor in referencing scientific evidence. Nutrition therapies that seem quaint to us now reflect the traditional origins of many medical practices that persist today. Knowledge of this history should motivate us to critically evaluate the research base that supports all aspects of nutrition therapy, develop protocols to assess practices that remain unexamined, and embrace the discipline of evidence-based practice.

Manual versus sonic-powered toothbrushing for plaque reduction in patients with dental implants: an explanatory randomised controlled trial.

PubMed

Swierkot, Katrin; Brusius, Manuel; Leismann, Diana; Nonnenmacher, Claudia; Nüsing, Rolf; Lubbe, Dirk; Schade-Brittinger, Carmen; Mengel, Reiner

2013-01-01

The aim of the present study was to investigate plaque levels following sonic-powered and manual toothbrushing in subjects with dental implants. This study included 36 male and 47 female partially edentulous patients (age range 45-78 years, mean age 59.8 years) that were randomly assigned to one of two treatment groups: the sonic toothbrush group (n = 42; Philips Sonicare FlexCare® toothbrush) or the manual toothbrush group (n = 41; Oral-B P40®). Clinical, microbiological and immunological examinations were performed blinded at baseline and after 3, 6, 9 and 12 months. Microbiological analyses were performed by real-time polymerase chain reaction. Immunological analyses (prostaglandin E2) were performed by chromatography-electrospray spectrometry. The plaque index difference between baseline and 12 months at implants showed no significant difference between sonic or manual toothbrushing in a two-sided Mann-Whitney test (W = 773.5, P = 0.426, 95% CI -0.64 to 0.20). At the end of the study, there were no significant changes in plaque index, bleeding on probing, gingival index, pocket probing depth, gingival recession, clinical attachment level or the microbiological and immunological outcomes at implants or teeth in either group. This study uncovered no significant difference between sonic and manual toothbrushing for plaque reduction at implants and teeth. Both toothbrushes maintain healthy peri-implant soft tissue.

GeneLab

NASA Technical Reports Server (NTRS)

Berrios, Daniel C.; Thompson, Terri G.

2015-01-01

NASA GeneLab is expected to capture and distribute omics data and experimental and process conditions most relevant to research community in their statistical and theoretical analysis of NASAs omics data.

NASA directives master list and index

NASA Technical Reports Server (NTRS)

1993-01-01

This Handbook sets forth in two parts the following information for the guidance of users of the NASA Management Directives System. Part A is a master list of management directives in force as of March 31, 1993. Chapter 1 contains introductory informative material on how to use this Handbook. Chapter 2 is a complete master list of Agencywide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office or installation to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA Handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA management directives published in the Code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 7. Part B is the index to NASA management directives in force as of March 31, 1993. This part contains an in-depth alphabetical index to all NASA management directives other than Handbooks. NHB's 1610.6, 'NASA Personnel Security Handbook,' 1620.3, 'NASA Physical Security Handbook,' 1640.4, 'NASA Information Security Program,' 1900.1, 'Standards of Conduct for NASA Employees,' 5103.6, 'Source Evaluation Board Handbook,' and 7400.1, 'Budget Administration Manual,' are indexed in-depth. All other NHB's are indexed by titles only.

Awakening interest in the natural sciences - BASF's Kids' Labs.

PubMed

Lang, Cinthia

2012-01-01

At BASF's Ludwigshafen headquarters, kids and young adults in grades 1-13 can learn about chemistry in the Kids' Labs. Different programs exist for different levels of knowledge. In the two 'Hands-on Lab H(2)O & Co.' Kids' Labs, students from grades 1-6 explore the secrets of chemistry. BASF Kids' Labs have now been set up in over 30 countries. In Switzerland alone, almost 2,000 students have taken part in the 'Water Loves Chemistry' Kids' Lab since it was started in 2011. In Alsace, 600 students have participated to date. In the Teens' Lab 'Xplore Middle School', middle school students explore five different programs with the themes 'substance labyrinth', 'nutrition', 'coffee, caffeine & co.', 'cosmetics' and 'energy'. Biotechnological methods are the focus of the Teens' Lab 'Xplore Biotech' for students taking basic and advanced biology courses. In the 'Xplore High School' Teens' Lab, chemistry teachers present their own experimental lab instruction for students in basic and advanced chemistry courses. The Virtual Lab has been expanding the offerings of the BASF Kids' Labs since 2011. The online lab was developed by the company for the International Year Of Chemistry and gives kids and young adults the opportunity to do interactive experiments outside of the lab.

SRB-3D Solid Rocket Booster performance prediction program. Volume 3: Programmer's manual

NASA Technical Reports Server (NTRS)

Winkler, J. C.

1976-01-01

The programmer's manual for the Modified Solid Rocket Booster Performance Prediction Program (SRB-3D) describes the major control routines of SRB-3D, followed by a super index listing of the program and a cross-reference of the program variables.

Curricular Adaptations in Introductory Physics Labs

NASA Astrophysics Data System (ADS)

Dreyfus, Benjamin W.; Ewell, Mary; Moore, Kimberly

2017-01-01

When curricular materials are disseminated to new sites, there can be a tension between fidelity to the original intent of the developers and adaptation to local needs. In this case study we look at a lab activity that was initially developed for an introductory physics for the life sciences (IPLS) course at the University of Maryland, then implemented at George Mason University with significant adaptations. The goals of the two implementations were overlapping, but also differed in ways that are reflected in the two versions of the lab. We compare student lab report data from the two sites to examine the impacts of the adaptation on how students engaged with the lab.

Lab architecture

NASA Astrophysics Data System (ADS)

Crease, Robert P.

2008-04-01

There are few more dramatic illustrations of the vicissitudes of laboratory architecturethan the contrast between Building 20 at the Massachusetts Institute of Technology (MIT) and its replacement, the Ray and Maria Stata Center. Building 20 was built hurriedly in 1943 as temporary housing for MIT's famous Rad Lab, the site of wartime radar research, and it remained a productive laboratory space for over half a century. A decade ago it was demolished to make way for the Stata Center, an architecturally striking building designed by Frank Gehry to house MIT's computer science and artificial intelligence labs (above). But in 2004 - just two years after the Stata Center officially opened - the building was criticized for being unsuitable for research and became the subject of still ongoing lawsuits alleging design and construction failures.

Comparison of Inoculation with the InoqulA and WASP Automated Systems with Manual Inoculation

PubMed Central

Croxatto, Antony; Dijkstra, Klaas; Prod'hom, Guy

2015-01-01

The quality of sample inoculation is critical for achieving an optimal yield of discrete colonies in both monomicrobial and polymicrobial samples to perform identification and antibiotic susceptibility testing. Consequently, we compared the performance between the InoqulA (BD Kiestra), the WASP (Copan), and manual inoculation methods. Defined mono- and polymicrobial samples of 4 bacterial species and cloudy urine specimens were inoculated on chromogenic agar by the InoqulA, the WASP, and manual methods. Images taken with ImagA (BD Kiestra) were analyzed with the VisionLab version 3.43 image analysis software to assess the quality of growth and to prevent subjective interpretation of the data. A 3- to 10-fold higher yield of discrete colonies was observed following automated inoculation with both the InoqulA and WASP systems than that with manual inoculation. The difference in performance between automated and manual inoculation was mainly observed at concentrations of >106 bacteria/ml. Inoculation with the InoqulA system allowed us to obtain significantly more discrete colonies than the WASP system at concentrations of >107 bacteria/ml. However, the level of difference observed was bacterial species dependent. Discrete colonies of bacteria present in 100- to 1,000-fold lower concentrations than the most concentrated populations in defined polymicrobial samples were not reproducibly recovered, even with the automated systems. The analysis of cloudy urine specimens showed that InoqulA inoculation provided a statistically significantly higher number of discrete colonies than that with WASP and manual inoculation. Consequently, the automated InoqulA inoculation greatly decreased the requirement for bacterial subculture and thus resulted in a significant reduction in the time to results, laboratory workload, and laboratory costs. PMID:25972424

Arc Habitat Suitability Index computer software

Treesearch

Thomas M. Juntti; Mark A. Rumble

2006-01-01

This user manual describes the Arc Habitat Suitability Index (ArcHSI), which is a geographical information system (GIS) model that estimates the ability of an area to meet the food and cover requirements of an animal species. The components and parameters of the model occur in tables and can be easily edited or otherwise modified. ArcHSI runs on personal computers with...

Generalized Nanosatellite Avionics Testbed Lab

NASA Technical Reports Server (NTRS)

Frost, Chad R.; Sorgenfrei, Matthew C.; Nehrenz, Matt

2015-01-01

The Generalized Nanosatellite Avionics Testbed (G-NAT) lab at NASA Ames Research Center provides a flexible, easily accessible platform for developing hardware and software for advanced small spacecraft. A collaboration between the Mission Design Division and the Intelligent Systems Division, the objective of the lab is to provide testing data and general test protocols for advanced sensors, actuators, and processors for CubeSat-class spacecraft. By developing test schemes for advanced components outside of the standard mission lifecycle, the lab is able to help reduce the risk carried by advanced nanosatellite or CubeSat missions. Such missions are often allocated very little time for testing, and too often the test facilities must be custom-built for the needs of the mission at hand. The G-NAT lab helps to eliminate these problems by providing an existing suite of testbeds that combines easily accessible, commercial-offthe- shelf (COTS) processors with a collection of existing sensors and actuators.

Worldwide Lineages of Clinical Pneumococci in a Japanese Teaching Hospital Identified by DiversiLab System.

PubMed

Kashiwaya, Kiyoshi; Saga, Tomoo; Ishii, Yoshikazu; Sakata, Ryuji; Iwata, Morihiro; Yoshizawa, Sadako; Chang, Bin; Ohnishi, Makoto; Tateda, Kazuhiro

2016-06-01

Pneumococcal Molecular Epidemiology Network (PMEN) clones are representatives of worldwide-spreading pathogens. DiversiLab system, a repetitive PCR system, has been proposed as a less labor-and time-intensive genotyping platform alternative to conventional methods. However, the utility and analysis parameters of DiversiLab for identifying worldwide lineages was not established. To evaluate and optimize the performance of DiversiLab for identifying worldwide pneumococcal lineages, we examined 245 consecutive isolates of clinical Streptococcus pneumoniae from all age-group patients at a teaching hospital in Japan. The capsular swelling reaction of all isolates yielded 24 different serotypes. Intensive visual observation (VO) of DiversiLab band pattern difference divided all isolates into 73 clusters. Multilocus sequence typing (MLST) of representative 73 isolates from each VO cluster yielded 51 different STs. Among them, PMEN-related lineages accounted for 63% (46/73). Although the serotype of PMEN-related isolates was identical to that of the original PMEN clone in 70% (32/46), CC156-related PMEN lineages, namely Greece(6B)-22 and Colombia(23F)-26, harbored various capsular types discordant to the original PMEN clones. Regarding automated analysis, genotyping by extended Jaccard (XJ) with a 75% similarity index cutoff (SIC) showed the highest correlation with serotyping (adjusted Rand's coefficient, 0.528). Elevating the SIC for XJ to 85% increased the discriminatory power sufficient for distinguishing two major PMEN-related isolates of Taiwan(19F)-14 and Netherlands(3)-31. These results demonstrated a potential utility of DiversiLab for identifying worldwide lineage of pneumococcus. An optimized parameters of automated analysis should be useful especially for comparison for reference strains by "identification" function of DiversiLab. Copyright © 2016 Japanese Society of Chemotherapy and The Japanese Association for Infectious Diseases. Published by Elsevier Ltd

Planning a Computer Lab: Considerations To Ensure Success.

ERIC Educational Resources Information Center

IALL Journal of Language Learning Technologies, 1994

1994-01-01

Presents points to consider when organizing a computer laboratory. These include the lab's overall objectives and how best to meet them; what type of students will use the lab; where the lab will be located; and what software and hardware can best meet the lab's overall objectives, population, and location requirements. Other factors include time,…

TQM in a Computer Lab.

ERIC Educational Resources Information Center

Swanson, Dewey A.; Phillips, Julie A.

At the Purdue University School of Technology (PST) at Columbus, Indiana, the Total Quality Management (TQM) philosophy was used in the computer laboratories to better meet student needs. A customer satisfaction survey was conducted to gather data on lab facilities, lab assistants, and hardware/software; other sections of the survey included…

State of laboratory manual instruction in California community college introductory (non-majors) biology laboratory instruction

NASA Astrophysics Data System (ADS)

Priest, Michelle

College students must complete a life science course prior to graduation for a bachelor's degree. Generally, the course has lecture and laboratory components. It is in the laboratory where there are exceptional opportunities for exploration, challenge and application of the material learned. Optimally, this would utilize the best of inquiry based approaches. Most community colleges are using a home-grown or self written laboratory manual for the direction of work in the laboratory period. Little was known about the motivation, development and adaptation of use. It was also not known about the future of the laboratory manuals in light of the recent learning reform in California Community Colleges, Student Learning Outcomes. Extensive interviews were conducted with laboratory manual authors to determine the motivation, process of development, who was involved and learning framework used in the creation of the manuals. It was further asked of manual authors their ideas about the future of the manual, the development of staff and faculty and finally, the role Student Learning Outcomes would play in the manual. Science faculty currently teaching the non-majors biology laboratories for at least two semesters were surveyed on-line about actual practice of the manual, assessment, manual flexibility, faculty training and incorporation of Student Learning Outcomes. Finally, an evaluation of the laboratory manual was done using an established Laboratory Task Analysis Instrument. Laboratory manuals were evaluated on a variety of categories to determine the level of inquiry instruction done by students in the laboratory section. The results were that the development of homegrown laboratory manuals was done by community colleges in the Los Angeles and Orange Counties in an effort to minimize the cost of the manual to the students, to utilize all the exercises in a particular lab and to effectively utilize the materials already owned by the department. Further, schools wanted to

EPICS Channel Access Server for LabVIEW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhukov, Alexander P.

It can be challenging to interface National Instruments LabVIEW (http://www.ni.com/labview/) with EPICS (http://www.aps.anl.gov/epics/). Such interface is required when an instrument control program was developed in LabVIEW but it also has to be part of global control system. This is frequently useful in big accelerator facilities. The Channel Access Server is written in LabVIEW, so it works on any hardware/software platform where LabVIEW is available. It provides full server functionality, so any EPICS client can communicate with it.

ANIE: A mathematical algorithm for automated indexing of planar deformation features in quartz grains

NASA Astrophysics Data System (ADS)

Huber, Matthew S.; Ferriãre, Ludovic; Losiak, Anna; Koeberl, Christian

2011-09-01

Abstract- Planar deformation features (PDFs) in quartz, one of the most commonly used diagnostic indicators of shock metamorphism, are planes of amorphous material that follow crystallographic orientations, and can thus be distinguished from non-shock-induced fractures in quartz. The process of indexing data for PDFs from universal-stage measurements has traditionally been performed using a manual graphical method, a time-consuming process in which errors can easily be introduced. A mathematical method and computer algorithm, which we call the Automated Numerical Index Executor (ANIE) program for indexing PDFs, was produced, and is presented here. The ANIE program is more accurate and faster than the manual graphical determination of Miller-Bravais indices, as it allows control of the exact error used in the calculation and removal of human error from the process.

Aerographer's Mate 3 & 2. Rate Training Manual and Nonresident Career Course.

ERIC Educational Resources Information Center

Naval Education and Training Command, Pensacola, FL.

One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this self-study package provides subject matter that relates directly to the occupational qualifications of the Aerographer's Mate rating. Contents include a 17-chapter text, a 15-item appendix followed by a subject index and the associated…

A digital frequency stabilization system of external cavity diode laser based on LabVIEW FPGA

NASA Astrophysics Data System (ADS)

Liu, Zhuohuan; Hu, Zhaohui; Qi, Lu; Wang, Tao

2015-10-01

Frequency stabilization for external cavity diode laser has played an important role in physics research. Many laser frequency locking solutions have been proposed by researchers. Traditionally, the locking process was accomplished by analog system, which has fast feedback control response speed. However, analog system is susceptible to the effects of environment. In order to improve the automation level and reliability of the frequency stabilization system, we take a grating-feedback external cavity diode laser as the laser source and set up a digital frequency stabilization system based on National Instrument's FPGA (NI FPGA). The system consists of a saturated absorption frequency stabilization of beam path, a differential photoelectric detector, a NI FPGA board and a host computer. Many functions, such as piezoelectric transducer (PZT) sweeping, atomic saturation absorption signal acquisition, signal peak identification, error signal obtaining and laser PZT voltage feedback controlling, are totally completed by LabVIEW FPGA program. Compared with the analog system, the system built by the logic gate circuits, performs stable and reliable. User interface programmed by LabVIEW is friendly. Besides, benefited from the characteristics of reconfiguration, the LabVIEW program is good at transplanting in other NI FPGA boards. Most of all, the system periodically checks the error signal. Once the abnormal error signal is detected, FPGA will restart frequency stabilization process without manual control. Through detecting the fluctuation of error signal of the atomic saturation absorption spectrum line in the frequency locking state, we can infer that the laser frequency stability can reach 1MHz.

Future{at}Labs.Prosperity Game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, D.F.; Boyack, K.W.; Berman, M.

Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games, Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education, and research. These issues can be examined from a variety of perspectives ranging from global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Future{at}Labs.Prosperity Game{trademark} conducted under the sponsorship of the Industry Advisory Boards of the national labs, themore » national labs, Lockheed Martin Corporation, and the University of California. Players were drawn from all stakeholders involved including government, industry, labs, and academia. The primary objectives of this game were to: (1) explore ways to optimize the role of the multidisciplinary labs in serving national missions and needs; (2) explore ways to increase collaboration and partnerships among government, laboratories, universities, and industry; and (3) create a network of partnership champions to promote findings and policy options. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning the future of the labs.« less

Design of inquiry-oriented science labs: impacts on students' attitudes

NASA Astrophysics Data System (ADS)

Baseya, J. M.; Francis, C. D.

2011-11-01

Background: Changes in lab style can lead to differences in learning. Two inquiry-oriented lab styles are guided inquiry (GI) and problem-based (PB). Students' attitudes towards lab are important to consider when choosing between GI and PB styles during curriculum design. Purpose: We examined the degree to which lab experiences are explained by a GI or a PB lab style vs. students' attitudes towards specific aspects of the experience, reflected by perceived excitement (exc), difficulty (dif), time efficiency (eff) and association between lab and lecture material (help). Sample: Approximately 1000 students attending first-semester, college biology lab for science majors at the University of Colorado at Boulder, USA, participated in the study. Design and method: In 2007, two labs were run as GI and one as PB. Formats were switched in 2008. Attitudes were assessed with a post-semester survey. Results: Only the four attitude variables (not lab style) had a strong relationship with overall lab rating which was most strongly related to exc, followed by dif and help/eff. Dif and eff had the greatest influence on attitudes for or against GI vs. PB labs, and help and exc had little influence on a GI vs. a PB lab. Also, when dif was low, students' attitudes were not significantly different between PB and GI labs, but when dif was high, students' significantly rated GI labs higher than PB labs. Conclusions: Students' attitudes towards lab are more dependent on specific aspects of the experience than on lab style. Changes in GI vs. PB lab styles primarily influence dif and eff rather than exc and help. Dif may be an important factor to consider when implementing a lab in the PB vs. the GI format. It might be good to go with a GI when dif is high and a PB when dif is low.

Science Lab: A Peer Approach.

ERIC Educational Resources Information Center

Ronca, Courtney C.

The two goals of this program were to increase the number of classroom teachers using the lab and to increase the amount of time that the science lab was used. The solution strategy chosen was a combination of peer tutoring, orientation presentations, small group discovery experiments and activities, and individual science experiment stations. The…

A Manual Segmentation Tool for Three-Dimensional Neuron Datasets.

PubMed

Magliaro, Chiara; Callara, Alejandro L; Vanello, Nicola; Ahluwalia, Arti

2017-01-01

To date, automated or semi-automated software and algorithms for segmentation of neurons from three-dimensional imaging datasets have had limited success. The gold standard for neural segmentation is considered to be the manual isolation performed by an expert. To facilitate the manual isolation of complex objects from image stacks, such as neurons in their native arrangement within the brain, a new Manual Segmentation Tool (ManSegTool) has been developed. ManSegTool allows user to load an image stack, scroll down the images and to manually draw the structures of interest stack-by-stack. Users can eliminate unwanted regions or split structures (i.e., branches from different neurons that are too close each other, but, to the experienced eye, clearly belong to a unique cell), to view the object in 3D and save the results obtained. The tool can be used for testing the performance of a single-neuron segmentation algorithm or to extract complex objects, where the available automated methods still fail. Here we describe the software's main features and then show an example of how ManSegTool can be used to segment neuron images acquired using a confocal microscope. In particular, expert neuroscientists were asked to segment different neurons from which morphometric variables were subsequently extracted as a benchmark for precision. In addition, a literature-defined index for evaluating the goodness of segmentation was used as a benchmark for accuracy. Neocortical layer axons from a DIADEM challenge dataset were also segmented with ManSegTool and compared with the manual "gold-standard" generated for the competition.

Reference Manual for the Instructional Use of Microcomputers. Volume I (Release II).

ERIC Educational Resources Information Center

Forman, Denyse; And Others

This manual is intended to provide educators with information and guidelines for locating, selecting, and purchasing commercially available courseware for the Apple II microcomputer. A courseware index is provided which lists programs in broad subject areas and grade levels. Information given for each program includes its DOS, language, cost,…

[The risk of manual handling loads in the hotel sector].

PubMed

Muraca, G; Martino, L Barbaro; Abbate, A; De Pasquale, D; Barbuzza, O; Brecciaroli, R

2007-01-01

The aim of our study is to evaluate the manual handling risk and the incidence of muscle-skeletal pathologies in the hotel compartment. Our study is conducted on 264 workers of the hotel compartment. The sample is divided on the base of the working turn in the following groups: porter (both to the plans and in the kitchen); waiters to the plans; services (gardeners and workers). The duties have been valued according to the method NIOSH. The presence of muscle-skeletal pathologies has been verified on the base to the accused symptomology, and on the presence of clinical objectivity and to the reports of checks. The data has been compared to a control group. The application of the NIOSH method has showed for each working profile an elevated synthetic index, > 3, and for porter the index is 5. The clinical data has shown an elevated incidence of pathologies of the spine, especially lumbar spine, with a high prevalence in the group of male porters. In conclusion we believe that the manual handling represents a particularly remarkable risk for the workers in the hotel compartment.

Virtual Instrument for Determining Rate Constant of Second-Order Reaction by pX Based on LabVIEW 8.0

PubMed Central

Meng, Hu; Li, Jiang-Yuan; Tang, Yong-Huai

2009-01-01

The virtual instrument system based on LabVIEW 8.0 for ion analyzer which can measure and analyze ion concentrations in solution is developed and comprises homemade conditioning circuit, data acquiring board, and computer. It can calibrate slope, temperature, and positioning automatically. When applied to determine the reaction rate constant by pX, it achieved live acquiring, real-time displaying, automatical processing of testing data, generating the report of results; and other functions. This method simplifies the experimental operation greatly, avoids complicated procedures of manual processing data and personal error, and improves veracity and repeatability of the experiment results. PMID:19730752

Virtual Instrument for Determining Rate Constant of Second-Order Reaction by pX Based on LabVIEW 8.0.

PubMed

Meng, Hu; Li, Jiang-Yuan; Tang, Yong-Huai

2009-01-01

The virtual instrument system based on LabVIEW 8.0 for ion analyzer which can measure and analyze ion concentrations in solution is developed and comprises homemade conditioning circuit, data acquiring board, and computer. It can calibrate slope, temperature, and positioning automatically. When applied to determine the reaction rate constant by pX, it achieved live acquiring, real-time displaying, automatical processing of testing data, generating the report of results; and other functions. This method simplifies the experimental operation greatly, avoids complicated procedures of manual processing data and personal error, and improves veracity and repeatability of the experiment results.

H-Index of Astrophysicists at Raman Research Institute: Performance of Different Calculators

NASA Astrophysics Data System (ADS)

Meera, B. M.; Manjunath, M.

2012-08-01

H-index, a single number proposed by J. E. Hirsch in 2005 has gained popularity as an index number to measure the research performance of individuals, institutions, universities, etc. There are many calculators to derive the h-in dex number, such as Google Scholar, Web of Science, Scopus, etc. However, h-index can be calculated manually, provided we have access to a complete list of publications of a scientist and the number of citations received by them. It is observed that h-index for a given scientist at a ny given point of time differs from one calculator to the other. Here is an attempt to calculate the H-index of scientists of the Astronomy and Astrophysics Group at Raman Research Institute using Google Scholar Free calculator, Web of Science Paid calculator and The SAO/NASA As trophysics Data System manual calculation and comparison of the results. Application of this h- index phenomenon to the research output of RRI scientists in a group is done while keeping in mi nd Hirsch's systematic in vestigation to predict the position of a scientist using h-index in physics. It is believed that the higher the academic age of a scientist, the higher will be the h-index. An attempt is made to find whether this assumption is true with respect to the sample studied by including the superannuated scientists from Astronomy and Astrophysics Group at Raman Research Institute under the purview of this study.

LANGUAGE LABS--AN UPDATED REPORT.

ERIC Educational Resources Information Center

1963

REPORTS FROM SEVERAL SCHOOL DISTRICTS ON THE USE OF AND PLANNING OF LANGUAGE LABORATORIES ARE PRESENTED. LABORATORIES SHOULD BE ARRANGED FOR FLEXIBLE USE. THE AVERAGE HIGH SCHOOL STUDENT CAN USE A LAB PROFITABLY FOR 20 TO 25 MINUTES. THERE ARE THREE DIFFERENT TYPES OF LANGUAGE LABORATORIES THAT ARE DESCRIBED. THE SATELLITE LAB IS DIVIDED BY A…

Academic Pipeline and Futures Lab

DTIC Science & Technology

2016-02-01

AFRL-RY-WP-TR-2015-0186 ACADEMIC PIPELINE AND FUTURES LAB Brian D. Rigling Wright State University FEBRUARY 2016...DD-MM-YY) 2. REPORT TYPE 3. DATES COVERED (From - To) February 2016 Final 12 June 2009 – 30 September 2015 4. TITLE AND SUBTITLE ACADEMIC ...6 3 WSU ACADEMIC PIPELINE AND LAYERED SENSING FUTURES LAB (prepared by K

Methicillin-resistant Staphylococcus aureus: an overview for manual therapists().

PubMed

Green, Bart N; Johnson, Claire D; Egan, Jonathon Todd; Rosenthal, Michael; Griffith, Erin A; Evans, Marion Willard

2012-03-01

Methicillin-resistant Staphylococcus aureus (MRSA) is associated with difficult-to-treat infections and high levels of morbidity. Manual practitioners work in environments where MRSA is a common acquired infection. The purpose of this review is to provide a practical overview of MRSA as it applies to the manual therapy professions (eg, physical and occupational therapy, athletic training, chiropractic, osteopathy, massage, sports medicine) and to discuss how to identify and prevent MRSA infections in manual therapy work environments. PubMed and CINAHL were searched from the beginning of their respective indexing years through June 2011 using the search terms MRSA, methicillin-resistant Staphylococcus aureus, and Staphylococcus aureus. Texts and authoritative Web sites were also reviewed. Pertinent articles from the authors' libraries were included if they were not already identified in the literature search. Articles were included if they were applicable to ambulatory health care environments in which manual therapists work or if the content of the article related to the clinical management of MRSA. Following information extraction, 95 citations were included in this review, to include 76 peer-reviewed journal articles, 16 government Web sites, and 3 textbooks. Information was organized into 10 clinically relevant categories for presentation. Information was organized into the following clinically relevant categories: microbiology, development of MRSA, risk factors for infection, clinical presentation, diagnostic tests, screening tests, reporting, treatment, prevention for patients and athletes, and prevention for health care workers. Methicillin-resistant S aureus is a health risk in the community and to patients and athletes treated by manual therapists. Manual practitioners can play an essential role in recognizing MRSA infections and helping to control its transmission in the health care environment and the community. Essential methods for protecting patients

Towards a Manifesto for Living Lab Co-creation

NASA Astrophysics Data System (ADS)

Følstad, Asbjørn; Brandtzæg, Petter Bae; Gulliksen, Jan; Börjeson, Mikael; Näkki, Pirjo

There is a growing interest in Living Labs for innovation and development in the field of information and communication technology. In particular there seem to be a tendency that current Living Labs aim to involve users for co-creative purposes. However, the current literature on Living Lab co-creation is severely limited. Therefore an Interact workshop is arranged as a first step towards a manifesto for Living Lab co-creation.

Evaluation of a French medical multi-terminology indexer for the manual annotation of natural language medical reports of healthcare-associated infections.

PubMed

Sakji, Saoussen; Gicquel, Quentin; Pereira, Suzanne; Kergourlay, Ivan; Proux, Denys; Darmoni, Stéfan; Metzger, Marie-Hélène

2010-01-01

Surveillance of healthcare-associated infections is essential to prevention. A new collaborative project, namely ALADIN, was launched in January 2009 and aims to develop an automated detection tool based on natural language processing of medical documents. The objective of this study was to evaluate the annotation of natural language medical reports of healthcare-associated infections. A software MS Access application (NosIndex) has been developed to interface ECMT XML answer and manual annotation work. ECMT performances were evaluated by an infection control practitioner (ICP). Precision was evaluated for the 2 modules and recall only for the default module. Exclusion rate was defined as ratio between medical terms not found by ECMT and total number of terms evaluated. The medical discharge summaries were randomly selected in 4 medical wards. From the 247 medical terms evaluated, ECMT proposed 428 and 3,721 codes, respectively for the default and expansion modules. The precision was higher with the default module (P1=0.62) than with the expansion (P2=0.47). Performances of ECMT as support tool for the medical annotation were satisfactory.

2002 Construction manual

DOT National Transportation Integrated Search

2002-01-01

The Illinois Department of Transportation's Highway Construction Manual has been updated from its previous version. All previous editions of this manual are now obsolete and changes in content have been marked. The Construction Manual provides inform...

Caltrans : construction manual

DOT National Transportation Integrated Search

2009-08-01

Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

Berkeley Lab 2nd Grader Outreach

ScienceCinema

Scoggins, Jackie; Louie, Virginia

2017-12-11

The Berkeley Lab IT Department sponsored a community outreach program aimed at teaching young children about computers and networks. Second graders from LeConte Elementary School joined Lab IT Staff for a day of in-depth exercises and fun.

Labs: 1987.

ERIC Educational Resources Information Center

Igelsrud, Don, Ed.

1988-01-01

This article presents a variety of topics discussed in this column and at a biology teachers' workshop concerning the quality and value of lab techniques used for teaching high school biology. Topics included are Drosophila salivary glands, sea urchins, innovations, dyes and networking. (CW)

Berkeley Lab - Materials Sciences Division

Science.gov Websites

-486-6999 Urgent Radiation Protection Group Assistance Non-Life Threatening Event 24/7 Lab Phone: x7277 : 911 (no extentions required now) Non-Emergency Reporting (Fire and Police) Non-Life Threatening Event Spill Non-Life Threatening Event 24/7 Lab Phone: x6999 Cell Phone: 510-486-6999 Off Site Locations: 510

Report from the banding lab

USGS Publications Warehouse

Tautin, J.

1995-01-01

Mr. Tautin reported on the seemingly everchanging structure of biological science units within the Interior Department. Current Congressional proposals would either change the name of the Bird Banding Lab's parent agency or make it part of the Geological Survey. The current Congress has not looked favorably on science budgets within the Interior Department, and the Banding Lab's budget is being squeezed ever tighter.

“Retention Projection” Enables Reliable Use of Shared Gas Chromatographic Retention Data Across Labs, Instruments, and Methods

PubMed Central

Barnes, Brian B.; Wilson, Michael B.; Carr, Peter W.; Vitha, Mark F.; Broeckling, Corey D.; Heuberger, Adam L.; Prenni, Jessica; Janis, Gregory C.; Corcoran, Henry; Snow, Nicholas H.; Chopra, Shilpi; Dhandapani, Ramkumar; Tawfall, Amanda; Sumner, Lloyd W.; Boswell, Paul G.

2014-01-01

Gas chromatography-mass spectrometry (GC-MS) is a primary tool used to identify compounds in complex samples. Both mass spectra and GC retention times are matched to those of standards, but it is often impractical to have standards on hand for every compound of interest, so we must rely on shared databases of MS data and GC retention information. Unfortunately, retention databases (e.g. linear retention index libraries) are experimentally restrictive, notoriously unreliable, and strongly instrument dependent, relegating GC retention information to a minor, often negligible role in compound identification despite its potential power. A new methodology called “retention projection” has great potential to overcome the limitations of shared chromatographic databases. In this work, we tested the reliability of the methodology in five independent laboratories. We found that even when each lab ran nominally the same method, the methodology was 3-fold more accurate than retention indexing because it properly accounted for unintentional differences between the GC-MS systems. When the labs used different methods of their own choosing, retention projections were 4- to 165-fold more accurate. More importantly, the distribution of error in the retention projections was predictable across different methods and labs, thus enabling automatic calculation of retention time tolerance windows. Tolerance windows at 99% confidence were generally narrower than those widely used even when physical standards are on hand to measure their retention. With its high accuracy and reliability, the new retention projection methodology makes GC retention a reliable, precise tool for compound identification, even when standards are not available to the user. PMID:24205931

Computer-based Astronomy Labs for Non-science Majors

NASA Astrophysics Data System (ADS)

Smith, A. B. E.; Murray, S. D.; Ward, R. A.

1998-12-01

We describe and demonstrate two laboratory exercises, Kepler's Third Law and Stellar Structure, which are being developed for use in an astronomy laboratory class aimed at non-science majors. The labs run with Microsoft's Excel 98 (Macintosh) or Excel 97 (Windows). They can be run in a classroom setting or in an independent learning environment. The intent of the labs is twofold; first and foremost, students learn the subject matter through a series of informational frames. Next, students enhance their understanding by applying their knowledge in lab procedures, while also gaining familiarity with the use and power of a widely-used software package and scientific tool. No mathematical knowledge beyond basic algebra is required to complete the labs or to understand the computations in the spreadsheets, although the students are exposed to the concepts of numerical integration. The labs are contained in Excel workbook files. In the files are multiple spreadsheets, which contain either a frame with information on how to run the lab, material on the subject, or one or more procedures. Excel's VBA macro language is used to automate the labs. The macros are accessed through button interfaces positioned on the spreadsheets. This is done intentionally so that students can focus on learning the subject matter and the basic spreadsheet features without having to learn advanced Excel features all at once. Students open the file and progress through the informational frames to the procedures. After each procedure, student comments and data are automatically recorded in a preformatted Lab Report spreadsheet. Once all procedures have been completed, the student is prompted for a filename in which to save their Lab Report. The lab reports can then be printed or emailed to the instructor. The files will have full worksheet and workbook protection, and will have a "redo" feature at the end of the lab for students who want to repeat a procedure.

Program for creating an operating system generation cross reference index (SGINDEX)

NASA Technical Reports Server (NTRS)

Barth, C. W.

1972-01-01

Computer program to collect key data from Stage Two input of OS/360 system and to prepare formatted listing of index entries collected is discussed. Program eliminates manual paging through system output by providing comprehensive cross reference.

Simulated Exercise Physiology Laboratories.

ERIC Educational Resources Information Center

Morrow, James R., Jr.; Pivarnik, James M.

This book consists of a lab manual and computer disks for either Apple or IBM hardware. The lab manual serves as "tour guide" for the learner going through the various lab experiences. The manual contains definitions, proper terminology, and other basic information about physiological principles. It is organized so a step-by-step procedure may be…

Manual therapy for unsettled, distressed and excessively crying infants: a systematic review and meta-analyses

PubMed Central

Carnes, Dawn; Plunkett, Austin; Ellwood, Julie; Miles, Clare

2018-01-01

Objective To conduct a systematic review and meta-analyses to assess the effect of manual therapy interventions for healthy but unsettled, distressed and excessively crying infants and to provide information to help clinicians and parents inform decisions about care. Methods We reviewed published peer-reviewed primary research articles in the last 26 years from nine databases (Medline Ovid, Embase, Web of Science, Physiotherapy Evidence Database, Osteopathic Medicine Digital Repository, Cochrane (all databases), Index of Chiropractic Literature, Open Access Theses and Dissertations and Cumulative Index to Nursing and Allied Health Literature). Our inclusion criteria were: manual therapy (by regulated or registered professionals) of unsettled, distressed and excessively crying infants who were otherwise healthy and treated in a primary care setting. Outcomes of interest were: crying, feeding, sleep, parent–child relations, parent experience/satisfaction and parent-reported global change. Results Nineteen studies were selected for full review: seven randomised controlled trials, seven case series, three cohort studies, one service evaluation study and one qualitative study. We found moderate strength evidence for the effectiveness of manual therapy on: reduction in crying time (favourable: −1.27 hours per day (95% CI −2.19 to –0.36)), sleep (inconclusive), parent–child relations (inconclusive) and global improvement (no effect). The risk of reported adverse events was low: seven non-serious events per 1000 infants exposed to manual therapy (n=1308) and 110 per 1000 in those not exposed. Conclusions Some small benefits were found, but whether these are meaningful to parents remains unclear as does the mechanisms of action. Manual therapy appears relatively safe. PROSPERO registration number CRD42016037353. PMID:29371279

Model-based strategy for cell culture seed train layout verified at lab scale.

PubMed

Kern, Simon; Platas-Barradas, Oscar; Pörtner, Ralf; Frahm, Björn

2016-08-01

Cell culture seed trains-the generation of a sufficient viable cell number for the inoculation of the production scale bioreactor, starting from incubator scale-are time- and cost-intensive. Accordingly, a seed train offers potential for optimization regarding its layout and the corresponding proceedings. A tool has been developed to determine the optimal points in time for cell passaging from one scale into the next and it has been applied to two different cell lines at lab scale, AGE1.HN AAT and CHO-K1. For evaluation, experimental seed train realization has been evaluated in comparison to its layout. In case of the AGE1.HN AAT cell line, the results have also been compared to the formerly manually designed seed train. The tool provides the same seed train layout based on the data of only two batches.

Evaluation of oral microbiology lab curriculum reform.

PubMed

Nie, Min; Gao, Zhen Y; Wu, Xin Y; Jiang, Chen X; Du, Jia H

2015-12-07

According to the updated concept of oral microbiology, the School of Stomatology, Wuhan University, has carried out oral microbiology teaching reforms during the last 5 years. There was no lab curriculum before 2009 except for a theory course of oral microbiology. The school has implemented an innovative curriculum with oral medicine characteristics to strengthen understanding of knowledge, cultivate students' scientific interest and develop their potential, to cultivate the comprehensive ability of students. This study was designed to evaluate the oral microbiology lab curriculum by analyzing student performance and perceptions regarding the curriculum from 2009 to 2013. The lab curriculum adopted modalities for cooperative learning. Students collected dental plaque from each other and isolated the cariogenic bacteria with selective medium plates. Then they purified the enrichment culture medium and identified the cariogenic strains by Gram stain and biochemical tests. Both quantitative and qualitative data for 5 years were analysed in this study. Part One of the current study assessed student performance in the lab from 2009 to 2013. Part Two used qualitative means to assess students' perceptions by an open questionnaire. The 271 study students' grades on oral microbiology improved during the lab curriculum: "A" grades rose from 60.5 to 81.2 %, and "C" grades fell from 28.4 to 6.3 %. All students considered the lab curriculum to be interesting and helpful. Quantitative and qualitative data converge to suggest that the lab curriculum has strengthened students' grasp of important microbiology-related theory, cultivated their scientific interest, and developed their potential and comprehensive abilities. Our student performance and perception data support the continued use of the innovative teaching system. As an extension and complement of the theory course, the oral microbiology lab curriculum appears to improve the quality of oral medicine education and help to

Innovation - A view from the Lab

USDA-ARS?s Scientific Manuscript database

The USDA Ag Lab in Peoria helps bridge the gap between agricultural producers and commercial manufacturers. In 2015, the Ag Lab, officially known as the Agricultural Research Service (ARS) National Center for Agricultural Utilization Research (NCAUR), is celebrating 75 years of research in Peoria. T...

LABS Foundational Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, Jerry

2012-01-01

They are the inventors of our generation dedicated to exceptional science, advancing the technologies of tomorrow. CO-LABS honors the outstanding achievements of researchers and their impact on the world.

CSTEM User Manual

NASA Technical Reports Server (NTRS)

Hartle, M.; McKnight, R. L.

2000-01-01

This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

Technology Reinvestment Project Manufacturing Education and Training. Volume 1

NASA Technical Reports Server (NTRS)

Schroer, Bernard J.; Bond, Arthur J.

1997-01-01

The manufacturing education program is a joint program between the University of Alabama in Huntsville's (UAH) College of Engineering and Alabama A&M University's (AAMLJ) School of Engineering and Technology. The objective of the program is to provide more hands-on experiences to undergraduate engineering and engineering technology students. The scope of work consisted of. Year 1, Task 1: Review courses at Alabama Industrial Development Training (AIDT); Task 2: Review courses at UAH and AAMU; Task 3: Develop new lab manuals; Task 4: Field test manuals; Task 5: Prepare annual report. Year 2, Task 1: Incorporate feedback into lab manuals; Task 2 : Introduce lab manuals into classes; Task 3: Field test manuals; Task 4: Prepare annual report. Year 3, Task 1: Incorporate feedback into lab manuals; Task 2: Introduce lab manuals into remaining classes; Task 3: Conduct evaluation with assistance of industry; Task 4: Prepare final report. This report only summarizes the activities of the University of Alabama in Huntsville. The activities of Alabama A&M University are contained in a separate report.

Economic evaluation of manual therapy for musculoskeletal diseases: a protocol for a systematic review and narrative synthesis of evidence.

PubMed

Kim, Chang-Gon; Mun, Su-Jeong; Kim, Ka-Na; Shin, Byung-Cheul; Kim, Nam-Kwen; Lee, Dong-Hyo; Lee, Jung-Han

2016-05-13

Manual therapy is the non-surgical conservative management of musculoskeletal disorders using the practitioner's hands on the patient's body for diagnosing and treating disease. The aim of this study is to systematically review trial-based economic evaluations of manual therapy relative to other interventions used for the management of musculoskeletal diseases. Randomised clinical trials (RCTs) on the economic evaluation of manual therapy for musculoskeletal diseases will be included in the review. The following databases will be searched from their inception: Medline, Embase, Cochrane Central Register of Controlled Trials (CENTRAL), Cumulative Index to Nursing and Allied Health Literature (CINAHL), Econlit, Mantis, Index to Chiropractic Literature, Science Citation Index, Social Science Citation Index, Allied and Complementary Medicine Database (AMED), Cochrane Database of Systematic Reviews (CDSR), National Health Service Database of Abstracts of Reviews of Effects (NHS DARE), National Health Service Health Technology Assessment Database (NHS HTA), National Health Service Economic Evaluation Database (NHS EED), CENTRAL, five Korean medical databases (Oriental Medicine Advanced Searching Integrated System (OASIS), Research Information Service System (RISS), DBPIA, Korean Traditional Knowledge Portal (KTKP) and KoreaMed) and three Chinese databases (China National Knowledge Infrastructure (CNKI), VIP and Wanfang). The evidence for the cost-effectiveness, cost-utility and cost-benefit of manual therapy for musculoskeletal diseases will be assessed as the primary outcome. Health-related quality of life and adverse effects will be assessed as secondary outcomes. We will critically appraise the included studies using the Cochrane risk of bias tool and the Drummond checklist. Results will be summarised using Slavin's qualitative best-evidence synthesis approach. The results of the study will be disseminated via a peer-reviewed journal and/or conference presentations

Instruct coders' manual

NASA Technical Reports Server (NTRS)

Friend, J.

1971-01-01

A manual designed both as an instructional manual for beginning coders and as a reference manual for the coding language INSTRUCT, is presented. The manual includes the major programs necessary to implement the teaching system and lists the limitation of current implementation. A detailed description is given of how to code a lesson, what buttons to push, and what utility programs to use. Suggestions for debugging coded lessons and the error messages that may be received during assembly or while running the lesson are given.

Dosimetric benefits of automation in the treatment of lower thoracic esophageal cancer: Is manual planning still an alternative option?

PubMed

Li, Xiadong; Wang, Lu; Wang, Jiahao; Han, Xu; Xia, Bing; Wu, Shixiu; Hu, Weigang

2017-01-01

This study aimed to design automated volumetric-modulated arc therapy (VMAT) plans in Pinnacle auto-planning and compare it with manual plans for patients with lower thoracic esophageal cancer (EC). Thirty patients with lower thoracic EC were randomly selected for replanning VMAT plans using auto-planning in Pinnacle treatment planning system (TPS) version 9.10. Historical plans of these patients were then compared. Dose-volume histogram (DVH) statistics, dose uniformity, and dose homogeneity were analyzed to evaluate treatment plans. Auto-planning was superior in terms of conformity index (CI) and homogeneity index (HI) for planning target volume (PTV), significantly improving 8.2% (p = 0.013) and 25% (p = 0.007) compared with manual planning, respectively, and decreasing dose of heart and liver irradiated by 20 to 40 Gy and 5 to 30 Gy, respectively (p < 0.05). Meanwhile, auto-planning further reduced the maximum dose (D max ) of spinal cord by 6.9 Gy compared with manual planning (p = 0.000). Additionally, manual planning showed the significantly lower low-dose volume (V 5 ) for the lung (p = 0.005). For auto-planning, the V 5 of the lung was significantly associated with the relative volume index (the volume ratio of PTV to the lung), and the correlation coefficient (R) and p-value were 0.994 and 0.000. Pinnacle auto-planning achieved superior target conformity and homogeneity and similar target coverage compared with historical manual planning. Most of organs at risk (OARs) sparing was significantly improved by auto-planning except for the V 5 of the lung, and the low dose distribution was highly associated with PTV volume and lung volume in auto-planning. Copyright © 2017 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Experimental assessment of oral hygiene achieved by children wearing rapid palatal expanders, comparing manual and electric toothbrushes.

PubMed

Mazzoleni, S; Bonaldo, G; Pontarolo, E; Zuccon, A; De Francesco, M; Stellini, E

2014-08-01

The aim was to compare the efficacy of the electric versus the manual toothbrush in terms of the oral hygiene achieved by patients wearing rapid palatal expanders (RPEs). Forty patients were randomly divided into two groups; one equipped with a manual toothbrush (Group A), the other with an electric toothbrush (Group B). Each child's plaque index (PI) and gingival index (GI) were calculated at banded molar level at times T0 (before banding), T1 (a month later), T2 (3 months later) and T3 (when the expander was removed). At each appointment, the PI and GI were recorded and the patient was remotivated. The level of oral hygiene achieved by the group using an electric toothbrush produced a greater improvement in the two indexes than in the group using the manual toothbrush that showed no statistically significant improvement (PI T0-T3: P = 0.309; GI T0-T3: P = 0.141). Both indexes dropped considerably in both groups from T0 to T2, but more so in the group B. From T2 to T3, although the electric toothbrush continued to be substantially more effective, Group B showed a statistically significant deterioration in the oral hygiene (PI +20%; GI +33%). Other assessments conducted on particular areas of the tooth showed improvements in the PI (-33%) for the vestibular region, and for the GI (-57%) in the palatal region among the patients in Group B, while there were no significant changes in these indexes in Group A. Our findings show that the electric toothbrush is statistically more efficient in performing an adequate level of oral hygiene in children wearing RPE. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Experiential Learning of Digital Communication Using LabVIEW

ERIC Educational Resources Information Center

Zhan, Wei; Porter, Jay R.; Morgan, Joseph A.

2014-01-01

This paper discusses the design and implementation of laboratories and course projects using LabVIEW in an instrumentation course. The pedagogical challenge is to enhance students' learning of digital communication using LabVIEW. LabVIEW was extensively used in the laboratory sessions, which better prepared students for the course projects. Two…

Aviation Electrician's Mate 1 & C. Rate Training Manual and Nonresident Career Course.

ERIC Educational Resources Information Center

Naval Education and Training Command, Pensacola, FL.

One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve who are studying for advancement in the Aviation Electrician's Mate (AE) rating, this text is based upon the Navy's professional occupational standards for AEI and AEC. Contents include a 10-chapter text followed by a subject index and the associated…

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program line the railings of an observation deck overlooking the Granular Mechanics and Regolith Operations Lab at NASA’s Kennedy Space Center in Florida. The spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program try out some of the machinery inside the Prototype Lab at NASA’s Kennedy Space Center. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Mike Lane demonstrates a 3D scanner inside the NASA Kennedy Space Center Prototype Lab for students in the My Brother’s Keeper program. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Harold (Russ) McAmis demonstrates machinery inside NASA Kennedy Space Center’s Prototype Lab for students in the My Brother’s Keeper program. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Jose Nunez of NASA Kennedy Space Center’s Exploration Research and Technology Programs talks to students in the My Brother’s Keeper program outside the Florida spaceport’s Swamp Works Lab. Kennedy is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

Baseball Physics: A New Mechanics Lab

NASA Astrophysics Data System (ADS)

Wagoner, Kasey; Flanagan, Daniel

2018-05-01

The game of baseball provides an interesting laboratory for experimenting with mechanical phenomena (there are many good examples in The Physics Teacher, available on Professor Alan Nathan's website, and discussed in Physics of Baseball & Softball). We have developed a lab, for an introductory-level physics course, that investigates many of these phenomena. The lab uses inexpensive, readily available equipment such as wooden baseball bats, baseballs, and actual Major League Baseball data. By the end of the lab, students have revisited many concepts they learned earlier in the semester and come away with an understanding of how to put seemingly disparate ideas together to analyze a fun sport.

Teaching Chemistry Lab Safety through Comics

NASA Astrophysics Data System (ADS)

di Raddo, Pasquale

2006-04-01

As a means for raising students' interest in aspects pertaining to chemistry lab safety, this article presents a novel approach to teaching this important subject. Comic book lab scenes that involve fictional characters familiar to many students are presented and discussed as to the safety concerns represented in those images. These are discussed in a safety prelab session. For the sake of comparison, students are then shown images taken from current chemistry journals of safety-conscious contemporary chemists at work in their labs. Finally the need to adhere to copyright regulations for the use of the images is discussed so as to increase students' awareness of academic honesty and copyright issues.

Pavlovian Conditioning of Larval Drosophila: An Illustrated, Multilingual, Hands-On Manual for Odor-Taste Associative Learning in Maggots

PubMed Central

Michels, Birgit; Saumweber, Timo; Biernacki, Roland; Thum, Jeanette; Glasgow, Rupert D. V.; Schleyer, Michael; Chen, Yi-chun; Eschbach, Claire; Stocker, Reinhard F.; Toshima, Naoko; Tanimura, Teiichi; Louis, Matthieu; Arias-Gil, Gonzalo; Marescotti, Manuela; Benfenati, Fabio; Gerber, Bertram

2017-01-01

Larval Drosophila offer a study case for behavioral neurogenetics that is simple enough to be experimentally tractable, yet complex enough to be worth the effort. We provide a detailed, hands-on manual for Pavlovian odor-reward learning in these animals. Given the versatility of Drosophila for genetic analyses, combined with the evolutionarily shared genetic heritage with humans, the paradigm has utility not only in behavioral neurogenetics and experimental psychology, but for translational biomedicine as well. Together with the upcoming total synaptic connectome of the Drosophila nervous system and the possibilities of single-cell-specific transgene expression, it offers enticing opportunities for research. Indeed, the paradigm has already been adopted by a number of labs and is robust enough to be used for teaching in classroom settings. This has given rise to a demand for a detailed, hands-on manual directed at newcomers and/or at laboratory novices, and this is what we here provide. The paradigm and the present manual have a unique set of features: The paradigm is cheap, easy, and robust; The manual is detailed enough for newcomers or laboratory novices; It briefly covers the essential scientific context; It includes sheets for scoring, data analysis, and display; It is multilingual: in addition to an English version we provide German, French, Japanese, Spanish and Italian language versions as well. The present manual can thus foster science education at an earlier age and enable research by a broader community than has been the case to date. PMID:28469564

Hydrogel Beads: The New Slime Lab?

ERIC Educational Resources Information Center

Brockway, Debra; Libera, Matthew; Welner, Heidi

2011-01-01

Creating slime fascinates students. Unfortunately, though intrigue is at its peak, the educational aspect of this activity is often minimal. This article describes a chemistry lab that closely relates to the slime lab and allows high school students to explore the concepts of chemical bonding, properties, and replacement reactions. It involves the…

Interactive, Online, Adsorption Lab to Support Discovery of the Scientific Process

NASA Astrophysics Data System (ADS)

Carroll, K. C.; Ulery, A. L.; Chamberlin, B.; Dettmer, A.

2014-12-01

Science students require more than methods practice in lab activities; they must gain an understanding of the application of the scientific process through lab work. Large classes, time constraints, and funding may limit student access to science labs, denying students access to the types of experiential learning needed to motivate and develop new scientists. Interactive, discovery-based computer simulations and virtual labs provide an alternative, low-risk opportunity for learners to engage in lab processes and activities. Students can conduct experiments, collect data, draw conclusions, and even abort a session. We have developed an online virtual lab, through which students can interactively develop as scientists as they learn about scientific concepts, lab equipment, and proper lab techniques. Our first lab topic is adsorption of chemicals to soil, but the methodology is transferrable to other topics. In addition to learning the specific procedures involved in each lab, the online activities will prompt exploration and practice in key scientific and mathematical concepts, such as unit conversion, significant digits, assessing risks, evaluating bias, and assessing quantity and quality of data. These labs are not designed to replace traditional lab instruction, but to supplement instruction on challenging or particularly time-consuming concepts. To complement classroom instruction, students can engage in a lab experience outside the lab and over a shorter time period than often required with real-world adsorption studies. More importantly, students can reflect, discuss, review, and even fail at their lab experience as part of the process to see why natural processes and scientific approaches work the way they do. Our Media Productions team has completed a series of online digital labs available at virtuallabs.nmsu.edu and scienceofsoil.com, and these virtual labs are being integrated into coursework to evaluate changes in student learning.

Bituminous Mixtures Lab

DOT National Transportation Integrated Search

2002-07-25

The Bituminous Mixtures Laboratory (BML) specializes in the research of asphalt pavement mixtures. This lab supports FHWA's efforts to develop, evaluate and improve materials, mixture design technology and performance-based tests for asphalt paving m...

Structures manual

DOT National Transportation Integrated Search

2001-01-01

This manual was written as a guide for use by design personnel in the Vermont Agency of Transportation Structures Section. This manual covers the design responsibilities of the Section. It does not cover other functions that are a part of the Structu...

Ciencias 2. Manual do Professor (Science Teacher's Manual).

ERIC Educational Resources Information Center

Raposo, Lucilia

This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

Seeing an Old Lab in a New Light: Transforming a Traditional Optics Lab into Full Guided Inquiry

ERIC Educational Resources Information Center

Maley, Tim; Stoll, Will; Demir, Kadir

2013-01-01

This paper describes the authors' experiences transforming a "cookbook" lab into an inquiry-based investigation and the powerful effect the inquiry-oriented lab had on our students' understanding of lenses. We found the inquiry-oriented approach led to richer interactions between students as well as a deeper conceptual…

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program watch as Jose Nunez of NASA Kennedy Space Center’s Exploration Research and Technology Programs demonstrates some of the hardware in the Electrostatic and Surface Physics Lab at the Florida spaceport. Kennedy is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program listen as Jose Nunez of NASA Kennedy Space Center’s Exploration Research and Technology Programs explains some of the hardware in the Electrostatic and Surface Physics Lab at the Florida spaceport. Kennedy is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

GeoLab: A Geological Workstation for Future Missions

NASA Technical Reports Server (NTRS)

Evans, Cynthia; Calaway, Michael; Bell, Mary Sue; Li, Zheng; Tong, Shuo; Zhong, Ye; Dahiwala, Ravi

2014-01-01

The GeoLab glovebox was, until November 2012, fully integrated into NASA's Deep Space Habitat (DSH) Analog Testbed. The conceptual design for GeoLab came from several sources, including current research instruments (Microgravity Science Glovebox) used on the International Space Station, existing Astromaterials Curation Laboratory hardware and clean room procedures, and mission scenarios developed for earlier programs. GeoLab allowed NASA scientists to test science operations related to contained sample examination during simulated exploration missions. The team demonstrated science operations that enhance theThe GeoLab glovebox was, until November 2012, fully integrated into NASA's Deep Space Habitat (DSH) Analog Testbed. The conceptual design for GeoLab came from several sources, including current research instruments (Microgravity Science Glovebox) used on the International Space Station, existing Astromaterials Curation Laboratory hardware and clean room procedures, and mission scenarios developed for earlier programs. GeoLab allowed NASA scientists to test science operations related to contained sample examination during simulated exploration missions. The team demonstrated science operations that enhance the early scientific returns from future missions and ensure that the best samples are selected for Earth return. The facility was also designed to foster the development of instrument technology. Since 2009, when GeoLab design and construction began, the GeoLab team [a group of scientists from the Astromaterials Acquisition and Curation Office within the Astromaterials Research and Exploration Science (ARES) Directorate at JSC] has progressively developed and reconfigured the GeoLab hardware and software interfaces and developed test objectives, which were to 1) determine requirements and strategies for sample handling and prioritization for geological operations on other planetary surfaces, 2) assess the scientific contribution of selective in-situ sample

E&V (Evaluation and Validation) Reference Manual, Version 1.0.

DTIC Science & Technology

1988-07-01

references featured in the Reference Manual. G-05097a GENERAL REFERENCE INFORMATION EXTRACTED , FROM * INDEXES AND CROSS REFERENCES CHAPTER 4...at E&V techniques through many different paths, and provides a means to extract useful information along the way. /^c^^s; /r^ ^yr*•**•»» * L...electronically (preferred) to szymansk@ajpo.sei.cmu.edu or by regular mail to Mr. Raymond Szymanski . AFWAUAAAF, Wright Patterson AFB, OH 45433-6543. ES-2

Manual therapy for unsettled, distressed and excessively crying infants: a systematic review and meta-analyses.

PubMed

Carnes, Dawn; Plunkett, Austin; Ellwood, Julie; Miles, Clare

2018-01-24

To conduct a systematic review and meta-analyses to assess the effect of manual therapy interventions for healthy but unsettled, distressed and excessively crying infants and to provide information to help clinicians and parents inform decisions about care. We reviewed published peer-reviewed primary research articles in the last 26 years from nine databases (Medline Ovid, Embase, Web of Science, Physiotherapy Evidence Database, Osteopathic Medicine Digital Repository , Cochrane (all databases), Index of Chiropractic Literature, Open Access Theses and Dissertations and Cumulative Index to Nursing and Allied Health Literature). Our inclusion criteria were: manual therapy (by regulated or registered professionals) of unsettled, distressed and excessively crying infants who were otherwise healthy and treated in a primary care setting. Outcomes of interest were: crying, feeding, sleep, parent-child relations, parent experience/satisfaction and parent-reported global change. Nineteen studies were selected for full review: seven randomised controlled trials, seven case series, three cohort studies, one service evaluation study and one qualitative study.We found moderate strength evidence for the effectiveness of manual therapy on: reduction in crying time (favourable: -1.27 hours per day (95% CI -2.19 to -0.36)), sleep (inconclusive), parent-child relations (inconclusive) and global improvement (no effect). The risk of reported adverse events was low: seven non-serious events per 1000 infants exposed to manual therapy (n=1308) and 110 per 1000 in those not exposed. Some small benefits were found, but whether these are meaningful to parents remains unclear as does the mechanisms of action. Manual therapy appears relatively safe. CRD42016037353. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Supercharging Lessons with a Virtual Lab

ERIC Educational Resources Information Center

Stewart, Jefferson; Vincent, Daniel

2013-01-01

The authors describes their experiences incorporating the virtual lab into a simple circuit lesson during an energy unit in a sixth-grade class. The lesson included a hands-on group experiment using wire, batteries, and light bulbs to make a circuit and an online simulation, using a virtual lab. Class discussions, student inquiries, and the study…

Magnetic Viscous Drag for Friction Labs

ERIC Educational Resources Information Center

Gaffney, Chris; Catching, Adam

2016-01-01

The typical friction lab performed in introductory mechanics courses is usually not the favorite of either the student or the instructor. The measurements are not all that easy to make, and reproducibility is usually a troublesome issue. This paper describes the augmentation of such a friction lab with a study of the viscous drag on a magnet…

Comparison of Effectiveness of Manual Orthodontic, Powered and Sonic Toothbrushes on Oral Hygiene of Fixed Orthodontic Patients.

PubMed

Sharma, Ruchi; Trehan, Mridula; Sharma, Sunil; Jharwal, Vikas; Rathore, Nidhi

2015-01-01

Maintenance of good oral hygiene is important for patients undergoing fixed orthodontic treatment. The aim of this study was to evaluate the effectiveness of a manual orthodontic toothbrush, powered toothbrush with oscillating head and sonic toothbrush in controlling plaque, gingivitis and interdental bleeding in patients undergoing fixed orthodontic treatment, and to compare their relative efficacy. Sixty subjects, who were to receive orthodontic treatment with both upper and lower fixed appliances, were randomly divided into three study groups, with 20 patients in each group. Groups I to III were given manual orthodontic, powered and sonic toothbrushes, respectively. Plaque index (PI), gingival index (GI) and interdental bleeding index were scored to assess the level of plaque accumulation, gingival health and interdental bleeding at baseline; 4 and 8 weeks recall visits after fixed appliance bonding. Paired t-tests and one-way analysis of variance (ANOVA) tests were used for intragroup and intergroup comparisons. The level of statistical significance was set at p < 0.05. This study showed that a significant reduction in all the three indices scores was found from baseline to 4 and 8 weeks in group III. On intergroup comparison, no statistically significant differences were detected between the three groups for any of the parameters assessed. On intragroup comparison, sonic brushes performed superiorly in reducing gingivitis, plaque and interdental bleeding as compared to the manual orthodontic and powered brushes. On intergroup comparison, the relative comparative effectiveness was found to be similar for all the three brushes. How to cite this article: Sharma R, Trehan M, Sharma S, Jharwal V, Rathore N. Comparison of Effectiveness of Manual Orthodontic, Powered and Sonic Toothbrushes on Oral Hygiene of Fixed Orthodontic Patients. Int J Clin Pediatr Dent 2015;8(3):181-189.

Comparison of Effectiveness of Manual Orthodontic, Powered and Sonic Toothbrushes on Oral Hygiene of Fixed Orthodontic Patients

PubMed Central

Trehan, Mridula; Sharma, Sunil; Jharwal, Vikas; Rathore, Nidhi

2015-01-01

ABSTRACT Introduction: Maintenance of good oral hygiene is important for patients undergoing fixed orthodontic treatment. Aim: The aim of this study was to evaluate the effectiveness of a manual orthodontic toothbrush, powered toothbrush with oscillating head and sonic toothbrush in controlling plaque, gingivitis and interdental bleeding in patients undergoing fixed orthodontic treatment, and to compare their relative efficacy. Materials and methods: Sixty subjects, who were to receive orthodontic treatment with both upper and lower fixed appliances, were randomly divided into three study groups, with 20 patients in each group. Groups I to III were given manual orthodontic, powered and sonic toothbrushes, respectively. Plaque index (PI), gingival index (GI) and interdental bleeding index were scored to assess the level of plaque accumulation, gingival health and interdental bleeding at baseline; 4 and 8 weeks recall visits after fixed appliance bonding. Paired t-tests and one-way analysis of variance (ANOVA) tests were used for intragroup and intergroup comparisons. The level of statistical significance was set at p < 0.05. Results: This study showed that a significant reduction in all the three indices scores was found from baseline to 4 and 8 weeks in group III. On intergroup comparison, no statistically significant differences were detected between the three groups for any of the parameters assessed. Conclusion: On intragroup comparison, sonic brushes performed superiorly in reducing gingivitis, plaque and interdental bleeding as compared to the manual orthodontic and powered brushes. On intergroup comparison, the relative comparative effectiveness was found to be similar for all the three brushes. How to cite this article: Sharma R, Trehan M, Sharma S, Jharwal V, Rathore N. Comparison of Effectiveness of Manual Orthodontic, Powered and Sonic Toothbrushes on Oral Hygiene of Fixed Orthodontic Patients. Int J Clin Pediatr Dent 2015;8(3):181-189. PMID:26628852

Effect of Combined Manual Acupuncture and Massage on Body Weight and Body Mass Index Reduction in Obese and Overweight Women: A Randomized, Short-term Clinical Trial.

PubMed

He, Junfeng; Zhang, Xing; Qu, Yating; Huang, Huiyong; Liu, Xia; Du, Jia; Guo, Shengtong

2015-04-01

Obesity is one of the leading health risk factors worldwide and is associated with several other risk factors and health problems. Acupuncture is utilized to treat a variety of health problems, one of which is obesity. Fifty-six obese women with body mass index (BMI) ≥25 kg/m(2) were recruited for this trial and were randomly divided into two groups, one with combined manual acupuncture and massage therapy (MAMT), and the other with only manual acupuncture therapy (MAT). In addition, 40 overweight women with BMI 23-25 kg/m(2) were randomly divided into two groups, one with MAMT and the other with MAT. Therapy was carried out once per day for 21 days, and the body weights and the BMIs were recorded every day. The results showed that both MAMT and MAT could reduce body weight and BMI significantly, compared with the pretreatment values, for all the participants (p < 0.001); however, the differences in body weight and BMI reductions between pre- and posttreatment for the MAMT and the MAT groups were not statistically significant. The optimal periods for reductions in both body weight and in BMI were the first 4 days. Accounting for the economic strategy (time and money) in alternative therapy, MAT alone may present a reasonable option in the treatment of overweight and obesity in adults. Copyright © 2015. Published by Elsevier B.V.

Flexible HVAC System for Lab or Classroom.

ERIC Educational Resources Information Center

Friedan, Jonathan

2001-01-01

Discusses an effort to design a heating, ventilation, and air conditioning system flexible enough to accommodate an easy conversion of classrooms to laboratories and dry labs to wet labs. The design's energy efficiency and operations and maintenance are examined. (GR)

Assessing Usage and Maximizing Finance Lab Impact: A Case Exploration

ERIC Educational Resources Information Center

Noguera, Magdy; Budden, Michael Craig; Silva, Alberto

2011-01-01

This paper reports the results of a survey conducted to assess students' usage and perceptions of a finance lab. Finance labs differ from simple computer labs as they typically contain data boards, streaming market quotes, terminals and software that allow for real-time financial analyses. Despite the fact that such labs represent significant and…

Design of Inquiry-Oriented Science Labs: Impacts on Students' Attitudes

ERIC Educational Resources Information Center

Baseya, J. M.; Francis, C. D.

2011-01-01

Background: Changes in lab style can lead to differences in learning. Two inquiry-oriented lab styles are guided inquiry (GI) and problem-based (PB). Students' attitudes towards lab are important to consider when choosing between GI and PB styles during curriculum design. Purpose: We examined the degree to which lab experiences are explained by a…

Terminology Manual.

ERIC Educational Resources Information Center

Felber, Helmut

A product of the International Information Center for Terminology (Infoterm), this manual is designed to serve as a reference tool for practitioners active in terminology work and documentation. The manual explores the basic ideas of the Vienna School of Terminology and explains developments in the area of applied computer aided terminography…

Designing virtual science labs for the Islamic Academy of Delaware

NASA Astrophysics Data System (ADS)

AlZahrani, Nada Saeed

Science education is a basic part of the curriculum in modern day classrooms. Instructional approaches to science education can take many forms but hands-on application of theory via science laboratory activities for the learner is common. Not all schools have the resources to provide the laboratory environment necessary for hands-on application of science theory. Some settings rely on technology to provide a virtual laboratory experience instead. The Islamic Academy of Delaware (IAD), a typical community-based organization, was formed to support and meet the essential needs of the Muslim community of Delaware. IAD provides science education as part of the overall curriculum, but cannot provide laboratory activities as part of the science program. Virtual science labs may be a successful model for students at IAD. This study was conducted to investigate the potential of implementing virtual science labs at IAD and to develop an implementation plan for integrating the virtual labs. The literature has shown us that the lab experience is a valuable part of the science curriculum (NBPTS, 2013, Wolf, 2010, National Research Council, 1997 & 2012). The National Research Council (2012) stressed the inclusion of laboratory investigations in the science curriculum. The literature also supports the use of virtual labs as an effective substitute for classroom labs (Babateen, 2011; National Science Teachers Association, 2008). Pyatt and Simms (2011) found evidence that virtual labs were as good, if not better than physical lab experiences in some respects. Although not identical in experience to a live lab, the virtual lab has been shown to provide the student with an effective laboratory experience in situations where the live lab is not possible. The results of the IAD teacher interviews indicate that the teachers are well-prepared for, and supportive of, the implementation of virtual labs to improve the science education curriculum. The investigator believes that with the

Risk assessment of manual material handling activities (case study: PT BRS Standard Industry)

NASA Astrophysics Data System (ADS)

Deviani; Triyanti, V.

2017-12-01

The process of moving material manually has the potential for injury to workers. The risk of injury will increase if we do not pay attention to the working conditions. The purpose of this study is to assess and analyze the injury risk level in manual handling material activity, as well as to improve the condition. The observed manual material handling activities is pole lifting and goods loading. These activities were analyzed using Job Strain Index method, Rapid Entire Body Assessment, and Chaffin’s 2D Planar Static Model. The results show that most workers who perform almost all activities have a high level of risk level with the score of JSI and REBA exceeds 9 points. For some activities, the estimated compression forces in the lumbar area also exceed the standard limits of 3400 N. Concerning this condition, several suggestions for improvement were made, improving the composition of packing, improving body posture, and making guideline posters.

Transforming the advanced lab: Part I - Learning goals

NASA Astrophysics Data System (ADS)

Zwickl, Benjamin; Finkelstein, Noah; Lewandowski, H. J.

2012-02-01

Within the physics education research community relatively little attention has been given to laboratory courses, especially at the upper-division undergraduate level. As part of transforming our senior-level Optics and Modern Physics Lab at the University of Colorado Boulder we are developing learning goals, revising curricula, and creating assessments. In this paper, we report on the establishment of our learning goals and a surrounding framework that have emerged from discussions with a wide variety of faculty, from a review of the literature on labs, and from identifying the goals of existing lab courses. Our goals go beyond those of specific physics content and apparatus, allowing instructors to personalize them to their contexts. We report on four broad themes and associated learning goals: Modeling (math-physics-data connection, statistical error analysis, systematic error, modeling of engineered "black boxes"), Design (of experiments, apparatus, programs, troubleshooting), Communication, and Technical Lab Skills (computer-aided data analysis, LabVIEW, test and measurement equipment).

Student Plagiarism and Faculty Responsibility in Undergraduate Engineering Labs

ERIC Educational Resources Information Center

Parameswaran, Ashvin; Devi, Poornima

2006-01-01

In undergraduate engineering labs, lab reports are routinely copied. By ignoring this form of plagiarism, teaching assistants and lab technicians neglect their role responsibility. By designing courses that facilitate it, however inadvertently, professors neglect their causal responsibility. Using the case of one university, we show via interviews…

Development and integration of a LabVIEW-based modular architecture for automated execution of electrochemical catalyst testing.

PubMed

Topalov, Angel A; Katsounaros, Ioannis; Meier, Josef C; Klemm, Sebastian O; Mayrhofer, Karl J J

2011-11-01

This paper describes a system for performing electrochemical catalyst testing where all hardware components are controlled simultaneously using a single LabVIEW-based software application. The software that we developed can be operated in both manual mode for exploratory investigations and automatic mode for routine measurements, by using predefined execution procedures. The latter enables the execution of high-throughput or combinatorial investigations, which decrease substantially the time and cost for catalyst testing. The software was constructed using a modular architecture which simplifies the modification or extension of the system, depending on future needs. The system was tested by performing stability tests of commercial fuel cell electrocatalysts, and the advantages of the developed system are discussed. © 2011 American Institute of Physics

Pennsylvania Blue Shield Job Linked Skills Program. Teacher's Manual [and] Technical Manual.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Inst. for the Study of Adult Literacy.

Two closely related publications from the same project, a Teacher's Manual" and a "Technical Manual", are combined here. These manuals are intended to accompany a work force literacy course designed to meet the basic skills needs of midliterate adults employed or preparing for employment in the health insurance industry.…

Aviation Support Equipment Technician M 3 & 2. Rate Training Manual and Nonresident Career Course.

ERIC Educational Resources Information Center

Naval Education and Training Command, Pensacola, FL.

One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this self-study unit relates directly to the occupational qualifications of the Aviation Support Equipment Technician M rating. Contents include a 15-chapter text followed by a subject index, qualifications for advancement, and the associated…

Oculomotor and Manual Indexes of Incidental and Intentional Spatial Sequence Learning during Middle Childhood and Adolescence

ERIC Educational Resources Information Center

Karatekin, Canan; Marcus, David J.; White, Tonya

2007-01-01

The goal of this study was to examine incidental and intentional spatial sequence learning during middle childhood and adolescence. We tested four age groups (8-10 years, 11-13 years, 14-17 years, and young adults [18+ years]) on a serial reaction time task and used manual and oculomotor measures to examine incidental sequence learning.…

Nutrient Control Design Manual

EPA Science Inventory

The purpose of this EPA design manual is to provide updated, state‐of‐the‐technology design guidance on nitrogen and phosphorus control at municipal Wastewater Treatment Plants (WWTPs). Similar to previous EPA manuals, this manual contains extensive information on the principles ...

Using lab notebooks to examine students' engagement in modeling in an upper-division electronics lab course

NASA Astrophysics Data System (ADS)

Stanley, Jacob T.; Su, Weifeng; Lewandowski, H. J.

2017-12-01

We demonstrate how students' use of modeling can be examined and assessed using student notebooks collected from an upper-division electronics lab course. The use of models is a ubiquitous practice in undergraduate physics education, but the process of constructing, testing, and refining these models is much less common. We focus our attention on a lab course that has been transformed to engage students in this modeling process during lab activities. The design of the lab activities was guided by a framework that captures the different components of model-based reasoning, called the Modeling Framework for Experimental Physics. We demonstrate how this framework can be used to assess students' written work and to identify how students' model-based reasoning differed from activity to activity. Broadly speaking, we were able to identify the different steps of students' model-based reasoning and assess the completeness of their reasoning. Varying degrees of scaffolding present across the activities had an impact on how thoroughly students would engage in the full modeling process, with more scaffolded activities resulting in more thorough engagement with the process. Finally, we identified that the step in the process with which students had the most difficulty was the comparison between their interpreted data and their model prediction. Students did not use sufficiently sophisticated criteria in evaluating such comparisons, which had the effect of halting the modeling process. This may indicate that in order to engage students further in using model-based reasoning during lab activities, the instructor needs to provide further scaffolding for how students make these types of experimental comparisons. This is an important design consideration for other such courses attempting to incorporate modeling as a learning goal.

Hazard House Workbook: A Workbook about Household Chemicals. Leader's Manual. Members Manual.

ERIC Educational Resources Information Center

California State Dept. of Toxic Substance Control, Sacramento.

The two books, the leader's manual and the members' manual address one environmental problem people come into contact with on a daily basis: potentially hazardous household products. The purpose of the books is to educate community groups about hazardous materials. The member's manual shares information about hazardous items and provides facts to…

RiskLab - a joint Teaching Lab on Hazard and Risk Management

NASA Astrophysics Data System (ADS)

Baruffini, Mi.; Baruffini, Mo.; Thuering, M.

2009-04-01

and analyzed, and a second part, composed by practical activities, where students can learn specific statistical methods and test and use technical software. Special importance is given to seminars held by experts or members of Civil Protection and risk management institutes. Excursions are often organized to directly see and study practical case studies (Eg. The city of Locarno and the lake Maggiore inundations). The course is organized following a "classical" structure (it's mainly held in a class or in an informatics lab), but students can also benefit from a special web portal, powered by "e.coursers" , the official USI/SUPSI Learning Management System , where they can find issues and documents about natural hazards and risk management. The main pedagogical value is that students can attend a course which is entirely devoted to dealing with natural and man-made hazards and risk, allowing them to resume geological, space planning and economic issues and to face real case studies in a challenging and holistic environment. The final aim of the course is to provide students an useful and integrated "toolbox", essential to cope with and to resolve the overwhelming problems due to vulnerability and danger increase of the present-day society. The course has by now reached the third academic year and the initial results are encouraging: beyond the knowledge and expertise acquired, the graduate students, that are now for the most part working in engineering studies or private companies, have shown to have acquired a mentality devoted to understanding and managing risk. REFERENCES PLANAT HTTP://WWW.CENAT.CH/INDEX.PHP?USERHASH=79598753&L=D&NAVID=154 ECOURSES HTTP://CORSI.ELEARNINGLAB.ORG/ NAHRIS HTTP://WWW.NAHRIS.CH/

Camp Health Aide Manual = Manual para trabajadores de salud.

ERIC Educational Resources Information Center

Robinson, June Grube; And Others

This bilingual manual serves as a textbook for migrant Camp Health Aides. Camp Health Aides are members of migrant labor camps enlisted to provide information about health and social services to migrant workers and their families. The manual is divided into 12 tabbed sections representing lessons. Teaching notes printed on contrasting paper…

California State University, Northridge: Hybrid Lab Courses

ERIC Educational Resources Information Center

EDUCAUSE, 2014

2014-01-01

California State University, Northridge's Hybrid Lab course model targets high failure rate, multisection, gateway courses in which prerequisite knowledge is a key to success. The Hybrid Lab course model components incorporate interventions and practices that have proven successful at CSUN and other campuses in supporting students, particularly…

The Portable Usability Testing Lab: A Flexible Research Tool.

ERIC Educational Resources Information Center

Hale, Michael E.; And Others

A group of faculty at the University of Georgia obtained funding for a research and development facility called the Learning and Performance Support Laboratory (LPSL). One of the LPSL's primary needs was obtaining a portable usability lab for software testing, so the facility obtained the "Luggage Lab 2000." The lab is transportable to…

Modifying Cookbook Labs.

ERIC Educational Resources Information Center

Clark, Robert, L.; Clough, Michael P.; Berg, Craig A.

2000-01-01

Modifies an extended lab activity from a cookbook approach for determining the percent mass of water in copper sulfate pentahydrate crystals to one which incorporates students' prior knowledge, engenders active mental struggling with prior knowledge and new experiences, and encourages metacognition. (Contains 12 references.) (ASK)

Digital image analysis of Ki67 proliferation index in breast cancer using virtual dual staining on whole tissue sections: clinical validation and inter-platform agreement.

PubMed

Koopman, Timco; Buikema, Henk J; Hollema, Harry; de Bock, Geertruida H; van der Vegt, Bert

2018-05-01

The Ki67 proliferation index is a prognostic and predictive marker in breast cancer. Manual scoring is prone to inter- and intra-observer variability. The aims of this study were to clinically validate digital image analysis (DIA) of Ki67 using virtual dual staining (VDS) on whole tissue sections and to assess inter-platform agreement between two independent DIA platforms. Serial whole tissue sections of 154 consecutive invasive breast carcinomas were stained for Ki67 and cytokeratin 8/18 with immunohistochemistry in a clinical setting. Ki67 proliferation index was determined using two independent DIA platforms, implementing VDS to identify tumor tissue. Manual Ki67 score was determined using a standardized manual counting protocol. Inter-observer agreement between manual and DIA scores and inter-platform agreement between both DIA platforms were determined and calculated using Spearman's correlation coefficients. Correlations and agreement were assessed with scatterplots and Bland-Altman plots. Spearman's correlation coefficients were 0.94 (p < 0.001) for inter-observer agreement between manual counting and platform A, 0.93 (p < 0.001) between manual counting and platform B, and 0.96 (p < 0.001) for inter-platform agreement. Scatterplots and Bland-Altman plots revealed no skewness within specific data ranges. In the few cases with ≥ 10% difference between manual counting and DIA, results by both platforms were similar. DIA using VDS is an accurate method to determine the Ki67 proliferation index in breast cancer, as an alternative to manual scoring of whole sections in clinical practice. Inter-platform agreement between two different DIA platforms was excellent, suggesting vendor-independent clinical implementability.

[The assessment of exposure to and the activity of the manual lifting of patients in wards: methods, procedures, the exposure index (MAPO) and classification criteria. Movimientazione e Assistenza Pazienti Ospedalizzati (Lifting and Assistance to Hospitalized Patients)].

PubMed

Menoni, O; Ricci, M G; Panciera, D; Occhipinti, E

1999-01-01

Since a method for quantifying exposure to patient handling in hospital wards is lacking, the authors describe and propose a model for identifying the main risk factors in this type of occupational exposure: presence of disabled patients, staff engaged on manual handling of patients, structure of the working environment, equipment and aids for moving patients, training of workers according to the specific risk. For each factor a procedure for identification and assessment is proposed that is easily applicable in practice. The authors also propose a formula for the calculation of a condensed exposure index (MAPO Index), which brings together the various factors. The exposure index, which requires further, detailed study and validation, makes it possible, in practice, to plan the preventive and health measures according to a specific order of priority, thus complying with the requirements of Chapter V of Law 626/94. From a practical point of view, in the present state of knowledge, it can be stated that for MAPO Index values between 0 and 1.5, risk is deemed negligible, average for values between 1.51 and 5, and high for values exceeding 5.

Efficacy of plaque removal and learning effect of a powered and a manual toothbrush.

PubMed

Lazarescu, D; Boccaneala, S; Illiescu, A; De Boever, J A

2003-08-01

Subjects with high plaque and gingivitis scores can profit most from the introduction of new manual or powered tooth brushes. To improve their hygiene, not only the technical characteristics of new brushes but also the learning effect in efficient handling are of importance. : The present study compared the efficacy in plaque removal of an electric and a manual toothbrush in a general population and analysed the learning effect in efficient handling. Eighty healthy subjects, unfamiliar with electric brushes, were divided into two groups: group 1 used the Philips/Jordan HP 735 powered brush and group 2 used a manual brush, Oral-B40+. Plaque index (PI) and gingival bleeding index (GBI) were assessed at baseline and at weeks 3, 6, 12 and 18. After each evaluation, patients abstained from oral hygiene for 24 h. The next day a 3-min supervised brushing was performed. Before and after this brushing, PI was assessed for the estimation of the individual learning effect. The study was single blinded. Over the 18-week period, PI reduced gradually and statistically significantly (p<0.001) in group 1 from 2.9 (+/-0.38) to 1.5 (+/-0.24) and in group 2 from 2.9 (+/-0.34) to 2.2 (+/-0.23). From week 3 onwards, the difference between groups was statistically significant (p<0.001). The bleeding index decreased in group 1 from 28% (+/-17%) to 7% (+/-5%) (p<0.001) and in group 2 from 30% (+/-12%) to 12% (+/-6%) (p<0.001). The difference between groups was statistically significant (p<0.001) from week 6 onwards. The learning effect, expressed as the percentage of plaque reduction after 3 min of supervised brushing, was 33% for group 1 and 26% for group 2 at week 0. This percentage increased at week 18 to 64% in group 1 and 44% in group 2 (difference between groups statistically significant: p<0.001). The powered brush was significantly more efficient in removing plaque and improving gingival health than the manual brush in the group of subjects unfamiliar with electric brushes. There

QUALIS OF TECHNICAL PRODUCTION: METRIC DEVELOPMENT FOR MANUALS.

PubMed

Pacheco, Adhemar Monteiro; Mendes, Carlos José Lazzarini

2015-01-01

There are few authors focused on the study of preparing manuals criteria, often criticized for methodological rigor of the information. However, it is interesting to understand what is going wrong; to understand prognosis in self-handling; in prevention of complications; in identifying better services and information; in encouraging the pursuit of excellence in the healthcare. In its preparation should be valued the basic requirements of a manual, which are: 1) wrote in simple words, being concise, efficient, clear with index or table of contents; 2) using the existing institutional rules; 3) being flexible; and 4) having ongoing process of review, update and distribution. In the process of evaluation of Medicine III manuals may have the following stratification: M4 - 100 points: when there is ISBN registration and disclosure in other languages; M3 - 75 points: registration with the ISBN only in our country; M2 - 50 points: registered in regional libraries; M1 - 25 points: manual use for inter-departmental or intra-institutional groups; M0 - 0 point: use of manual in intra-departmental teaching. In conclusion, it is known that the use of manuals is focused to the ones who do not know the subject; however, it is also an important tool that can minimize errors, avoid professional misconduct, optimize resources, and at the end allowing assessment of the subject at hand. Poucos são os autores que se debruçam no estudo dos critérios de elaboração de manuais, sendo muitas vezes criticados pelo rigor metodológico das informações. Contudo, eles são interessantes no entender o que é errado, compreender prognóstico, na autoassistência, na prevenção de complicações, para identificar melhores serviços e informações, motivando a busca pela excelência no atendimento assistencial. Em sua elaboração devem ser valorizados os requisitos básicos de um manual, que são: 1) conter redação simples, concisa, eficiente e clara, contendo índice ou sumário; 2

Quality Manual

NASA Astrophysics Data System (ADS)

Koch, Michael

The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

Radiological findings for hip dysplasia at skeletal maturity. Validation of digital and manual measurement techniques.

PubMed

Engesæter, Ingvild Øvstebø; Laborie, Lene Bjerke; Lehmann, Trude Gundersen; Sera, Francesco; Fevang, Jonas; Pedersen, Douglas; Morcuende, José; Lie, Stein Atle; Engesæter, Lars Birger; Rosendahl, Karen

2012-07-01

To report on intra-observer, inter-observer, and inter-method reliability and agreement for radiological measurements used in the diagnosis of hip dysplasia at skeletal maturity, as obtained by a manual and a digital measurement technique. Pelvic radiographs from 95 participants (56 females) in a follow-up hip study of 18- to 19-year-old patients were included. Eleven radiological measurements relevant for hip dysplasia (Sharp's, Wiberg's, and Ogata's angles; acetabular roof angle of Tönnis; articulo-trochanteric distance; acetabular depth-width ratio; femoral head extrusion index; maximum teardrop width; and the joint space width in three different locations) were validated. Three observers measured the radiographs using both a digital measurement program and manually in AgfaWeb1000. Inter-method and inter- and intra-observer agreement were analyzed using the mean differences between the readings/readers, establishing the 95% limits of agreement. We also calculated the minimum detectable change and the intra-class correlation coefficient. Large variations among different radiological measurements were demonstrated. However, the variation was not related to the use of either the manual or digital measurement technique. For measurements with greater absolute values (Sharp's angle, femoral head extrusion index, and acetabular depth-width ratio) the inter- and intra-observer and inter-method agreements were better as compared to measurements with lower absolute values (acetabular roof angle, teardrop and joint space width). The inter- and intra-observer variation differs notably across different radiological measurements relevant for hip dysplasia at skeletal maturity, a fact that should be taken into account in clinical practice. The agreement between the manual and digital methods is good.

Traditional Labs + New Questions = Improved Student Performance.

ERIC Educational Resources Information Center

Rezba, Richard J.; And Others

1992-01-01

Presents three typical lab activities involving the breathing rate of fish, the behavior of electromagnets, and tests for water hardness to demonstrate how labs can be modified to teach process skills. Discusses how basic concepts about experimentation are developed and ways of generating and improving science experiments. Includes a laboratory…

Covered bridge manual

DOT National Transportation Integrated Search

2005-04-01

This manual provides guidance to those involved with all aspects of the work, from initial inspection and evaluation, through the engineering of rehabilitation, to construction issues. Broadly speaking, this manual covers general terminology and hist...

A Well-Maintained Lab Is a Safer Lab. Safety Spotlight

ERIC Educational Resources Information Center

Walls, William H.; Strimel, Greg J.

2018-01-01

Administration and funding can cause Engineering/Technology Education (ETE) programs to thrive or die. To administrators, the production/prototyping equipment and laboratory setting are often viewed as the features that set ETE apart from other school subjects. A lab is a unique gift as well as a responsibility. If an administrator can see that…

MatLab Programming for Engineers Having No Formal Programming Knowledge

NASA Technical Reports Server (NTRS)

Shaykhian, Linda H.; Shaykhian, Gholam Ali

2007-01-01

MatLab is one of the most widely used very high level programming languages for Scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. Also, stated are the current limitations of the MatLab, which possibly can be taken care of by Mathworks Inc. in a future version to make MatLab more versatile.

eComLab: remote laboratory platform

NASA Astrophysics Data System (ADS)

Pontual, Murillo; Melkonyan, Arsen; Gampe, Andreas; Huang, Grant; Akopian, David

2011-06-01

Hands-on experiments with electronic devices have been recognized as an important element in the field of engineering to help students get familiar with theoretical concepts and practical tasks. The continuing increase the student number, costly laboratory equipment, and laboratory maintenance slow down the physical lab efficiency. As information technology continues to evolve, the Internet has become a common media in modern education. Internetbased remote laboratory can solve a lot of restrictions, providing hands-on training as they can be flexible in time and the same equipment can be shared between different students. This article describes an on-going remote hands-on experimental radio modulation, network and mobile applications lab project "eComLab". Its main component is a remote laboratory infrastructure and server management system featuring various online media familiar with modern students, such as chat rooms and video streaming.

Commerce Lab - A program of commercial flight opportunities

NASA Technical Reports Server (NTRS)

Robertson, J.; Atkins, H. L.; Williams, J. R.

1985-01-01

Commerce Lab is conceived as an adjunct to the National Space Transportation System (NSTS) by providing a focal point for commercial missions which could utilize existing NSTS carrier and resource capabilities for on-orbit experimentation in the microgravity sciences. In this context, the Commerce Lab program provides mission planning for private sector involvement in the space program, in general, and the commercial exploitation of the microgravity environment for materials processing research and development. It is expected that Commerce Lab will provide a logical transition between currently planned NSTS missions and future microgravity science and commercial R&D missions centered around the Space Station. The present study identifies candidate Commerce Lab flight experiments and their development status and projects a mission traffic model that can be used in commercial mission planning.

SHARP User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Y. Q.; Shemon, E. R.; Thomas, J. W.

SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculationmore » with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.« less

Workplace Safety Manual

DOT National Transportation Integrated Search

2002-04-10

N.C. Department of Transportation's workplace safety manual for online viewing. : The government of North Carolina feels that all employees are responsible for safety : on the job. This manual describes and sets out the operation of safety program : ...

Frederick National Lab Collaboration Success Stories | FNLCR Staging

Cancer.gov

IBBR and Frederick National Lab Collaborate to Study Vaccine-Boosting Compounds The Frederick National Lab and the University of Maryland’s Institute for Bioscience and Biotechnology Research (IBBR) will work under a formal collaboration to eval

Reducing unnecessary lab testing in the ICU with artificial intelligence.

PubMed

Cismondi, F; Celi, L A; Fialho, A S; Vieira, S M; Reti, S R; Sousa, J M C; Finkelstein, S N

2013-05-01

To reduce unnecessary lab testing by predicting when a proposed future lab test is likely to contribute information gain and thereby influence clinical management in patients with gastrointestinal bleeding. Recent studies have demonstrated that frequent laboratory testing does not necessarily relate to better outcomes. Data preprocessing, feature selection, and classification were performed and an artificial intelligence tool, fuzzy modeling, was used to identify lab tests that do not contribute an information gain. There were 11 input variables in total. Ten of these were derived from bedside monitor trends heart rate, oxygen saturation, respiratory rate, temperature, blood pressure, and urine collections, as well as infusion products and transfusions. The final input variable was a previous value from one of the eight lab tests being predicted: calcium, PTT, hematocrit, fibrinogen, lactate, platelets, INR and hemoglobin. The outcome for each test was a binary framework defining whether a test result contributed information gain or not. Predictive modeling was applied to recognize unnecessary lab tests in a real world ICU database extract comprising 746 patients with gastrointestinal bleeding. Classification accuracy of necessary and unnecessary lab tests of greater than 80% was achieved for all eight lab tests. Sensitivity and specificity were satisfactory for all the outcomes. An average reduction of 50% of the lab tests was obtained. This is an improvement from previously reported similar studies with average performance 37% by [1-3]. Reducing frequent lab testing and the potential clinical and financial implications are an important issue in intensive care. In this work we present an artificial intelligence method to predict the benefit of proposed future laboratory tests. Using ICU data from 746 patients with gastrointestinal bleeding, and eleven measurements, we demonstrate high accuracy in predicting the likely information to be gained from proposed future

Reducing unnecessary lab testing in the ICU with artificial intelligence

PubMed Central

Cismondi, F.; Celi, L.A.; Fialho, A.S.; Vieira, S.M.; Reti, S.R.; Sousa, J.M.C.; Finkelstein, S.N.

2017-01-01

Objectives To reduce unnecessary lab testing by predicting when a proposed future lab test is likely to contribute information gain and thereby influence clinical management in patients with gastrointestinal bleeding. Recent studies have demonstrated that frequent laboratory testing does not necessarily relate to better outcomes. Design Data preprocessing, feature selection, and classification were performed and an artificial intelligence tool, fuzzy modeling, was used to identify lab tests that do not contribute an information gain. There were 11 input variables in total. Ten of these were derived from bedside monitor trends heart rate, oxygen saturation, respiratory rate, temperature, blood pressure, and urine collections, as well as infusion products and transfusions. The final input variable was a previous value from one of the eight lab tests being predicted: calcium, PTT, hematocrit, fibrinogen, lactate, platelets, INR and hemoglobin. The outcome for each test was a binary framework defining whether a test result contributed information gain or not. Patients Predictive modeling was applied to recognize unnecessary lab tests in a real world ICU database extract comprising 746 patients with gastrointestinal bleeding. Main results Classification accuracy of necessary and unnecessary lab tests of greater than 80% was achieved for all eight lab tests. Sensitivity and specificity were satisfactory for all the outcomes. An average reduction of 50% of the lab tests was obtained. This is an improvement from previously reported similar studies with average performance 37% by [1–3]. Conclusions Reducing frequent lab testing and the potential clinical and financial implications are an important issue in intensive care. In this work we present an artificial intelligence method to predict the benefit of proposed future laboratory tests. Using ICU data from 746 patients with gastrointestinal bleeding, and eleven measurements, we demonstrate high accuracy in predicting the

Latest results from FROST at Jefferson Lab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ritchie, Barry G.

2014-06-01

The spectrum of broad and overlapping nucleon excitations can be greatly clarified by use of a polarized photon beam incident on a polarized target in meson photoproduction experiments. At Jefferson Lab, a program of such measurements has made use of the Jefferson Lab FROzen Spin Target (FROST). An overview of preliminary results are presented.

Evaluation of manual and automatic manually triggered ventilation performance and ergonomics using a simulation model.

PubMed

Marjanovic, Nicolas; Le Floch, Soizig; Jaffrelot, Morgan; L'Her, Erwan

2014-05-01

In the absence of endotracheal intubation, the manual bag-valve-mask (BVM) is the most frequently used ventilation technique during resuscitation. The efficiency of other devices has been poorly studied. The bench-test study described here was designed to evaluate the effectiveness of an automatic, manually triggered system, and to compare it with manual BVM ventilation. A respiratory system bench model was assembled using a lung simulator connected to a manikin to simulate a patient with unprotected airways. Fifty health-care providers from different professional groups (emergency physicians, residents, advanced paramedics, nurses, and paramedics; n = 10 per group) evaluated manual BVM ventilation, and compared it with an automatic manually triggered device (EasyCPR). Three pathological situations were simulated (restrictive, obstructive, normal). Standard ventilation parameters were recorded; the ergonomics of the system were assessed by the health-care professionals using a standard numerical scale once the recordings were completed. The tidal volume fell within the standard range (400-600 mL) for 25.6% of breaths (0.6-45 breaths) using manual BVM ventilation, and for 28.6% of breaths (0.3-80 breaths) using the automatic manually triggered device (EasyCPR) (P < .0002). Peak inspiratory airway pressure was lower using the automatic manually triggered device (EasyCPR) (10.6 ± 5 vs 15.9 ± 10 cm H2O, P < .001). The ventilation rate fell consistently within the guidelines, in the case of the automatic manually triggered device (EasyCPR) only (10.3 ± 2 vs 17.6 ± 6, P < .001). Significant pulmonary overdistention was observed when using the manual BVM device during the normal and obstructive sequences. The nurses and paramedics considered the ergonomics of the automatic manually triggered device (EasyCPR) to be better than those of the manual device. The use of an automatic manually triggered device may improve ventilation efficiency and decrease the risk of

The Mysterious Death: An HPLC Lab Experiment. An Undergraduate Forensic Lab

ERIC Educational Resources Information Center

Beussman, Douglas J.

2007-01-01

A high-performance liquid chromatography (HPLC) laboratory experiment based on the separation of four prescription drugs (disopyramide, lidocaine, procainamide, and quinidine) is presented. The experiment is set within the forensic science context of the discovery of a patient's mysterious death where a drug overdose is suspected. Each lab group…

Sodium Blood Test: MedlinePlus Lab Test Information

MedlinePlus

... Lab Tests Online [Internet]. American Association for Clinical Chemistry; c2001–2017. Cirrhosis; [updated 2017 Jan 8; cited ... Lab Tests Online [Internet]. American Association for Clinical Chemistry; c2001–2017. Electrolytes: Common Questions [updated 2015 Dec ...

Integrating Multiple On-line Knowledge Bases for Disease-Lab Test Relation Extraction.

PubMed

Zhang, Yaoyun; Soysal, Ergin; Moon, Sungrim; Wang, Jingqi; Tao, Cui; Xu, Hua

2015-01-01

A computable knowledge base containing relations between diseases and lab tests would be a great resource for many biomedical informatics applications. This paper describes our initial step towards establishing a comprehensive knowledge base of disease and lab tests relations utilizing three public on-line resources. LabTestsOnline, MedlinePlus and Wikipedia are integrated to create a freely available, computable disease-lab test knowledgebase. Disease and lab test concepts are identified using MetaMap and relations between diseases and lab tests are determined based on source-specific rules. Experimental results demonstrate a high precision for relation extraction, with Wikipedia achieving the highest precision of 87%. Combining the three sources reached a recall of 51.40%, when compared with a subset of disease-lab test relations extracted from a reference book. Moreover, we found additional disease-lab test relations from on-line resources, indicating they are complementary to existing reference books for building a comprehensive disease and lab test relation knowledge base.

LIVING LAB: User-Driven Innovation for Sustainability

ERIC Educational Resources Information Center

Liedtke, Christa; Welfens, Maria Jolanta; Rohn, Holger; Nordmann, Julia

2012-01-01

Purpose: The purpose of this paper is to summarize and discuss the results from the LIVING LAB design study, a project within the 7th Framework Programme of the European Union. The aim of this project was to develop the conceptual design of the LIVING LAB Research Infrastructure that will be used to research human interaction with, and stimulate…

NASA GeneLab Concept of Operations

NASA Technical Reports Server (NTRS)

Thompson, Terri; Gibbs, Kristina; Rask, Jon; Coughlan, Joseph; Smith, Jeffrey

2014-01-01

NASA's GeneLab aims to greatly increase the number of scientists that are using data from space biology investigations on board ISS, emphasizing a systems biology approach to the science. When completed, GeneLab will provide the integrated software and hardware infrastructure, analytical tools and reference datasets for an assortment of model organisms. GeneLab will also provide an environment for scientists to collaborate thereby increasing the possibility for data to be reused for future experimentation. To maximize the value of data from life science experiments performed in space and to make the most advantageous use of the remaining ISS research window, GeneLab will apply an open access approach to conducting spaceflight experiments by generating, and sharing the datasets derived from these biological studies in space.Onboard the ISS, a wide variety of model organisms will be studied and returned to Earth for analysis. Laboratories on the ground will analyze these samples and provide genomic, transcriptomic, metabolomic and proteomic data. Upon receipt, NASA will conduct data quality control tasks and format raw data returned from the omics centers into standardized, annotated information sets that can be readily searched and linked to spaceflight metadata. Once prepared, the biological datasets, as well as any analysis completed, will be made public through the GeneLab Space Bioinformatics System webb as edportal. These efforts will support a collaborative research environment for spaceflight studies that will closely resemble environments created by the Department of Energy (DOE), National Center for Biotechnology Information (NCBI), and other institutions in additional areas of study, such as cancer and environmental biology. The results will allow for comparative analyses that will help scientists around the world take a major leap forward in understanding the effect of microgravity, radiation, and other aspects of the space environment on model organisms

Chemical-assisted femtosecond laser writing of lab-in-fibers.

PubMed

Haque, Moez; Lee, Kenneth K C; Ho, Stephen; Fernandes, Luís A; Herman, Peter R

2014-10-07

The lab-on-chip (LOC) platform has presented a powerful opportunity to improve functionalization, parallelization, and miniaturization on planar or multilevel geometries that has not been possible with fiber optic technology. A migration of such LOC devices into the optical fiber platform would therefore open the revolutionary prospect of creating novel lab-in-fiber (LIF) systems on the basis of an efficient optical transport highway for multifunctional sensing. For the LIF, the core optical waveguide inherently offers a facile means to interconnect numerous types of sensing elements along the optical fiber, presenting a radical opportunity for optimizing the packaging and densification of diverse components in convenient geometries beyond that available with conventional LOCs. In this paper, three-dimensional patterning inside the optical fiber by femtosecond laser writing, together with selective chemical etching, is presented as a powerful tool to form refractive index structures such as optical waveguides and gratings as well as to open buried microfluidic channels and optical resonators inside the flexible and robust glass fiber. In this approach, optically smooth surfaces (~12 nm rms) are introduced for the first time inside the fiber cladding that precisely conform to planar nanograting structures when formed by aberration-free focusing with an oil-immersion lens across the cylindrical fiber wall. This process has enabled optofluidic components to be precisely embedded within the fiber to be probed by either the single-mode fiber core waveguide or the laser-formed optical circuits. We establish cladding waveguides, X-couplers, fiber Bragg gratings, microholes, mirrors, optofluidic resonators, and microfluidic reservoirs that define the building blocks for facile interconnection of inline core-waveguide devices with cladding optofluidics. With these components, more advanced, integrated, and multiplexed fiber microsystems are presented demonstrating

The experiment editor: supporting inquiry-based learning with virtual labs

NASA Astrophysics Data System (ADS)

Galan, D.; Heradio, R.; de la Torre, L.; Dormido, S.; Esquembre, F.

2017-05-01

Inquiry-based learning is a pedagogical approach where students are motivated to pose their own questions when facing problems or scenarios. In physics learning, students are turned into scientists who carry out experiments, collect and analyze data, formulate and evaluate hypotheses, and so on. Lab experimentation is essential for inquiry-based learning, yet there is a drawback with traditional hands-on labs in the high costs associated with equipment, space, and maintenance staff. Virtual laboratories are helpful to reduce these costs. This paper enriches the virtual lab ecosystem by providing an integrated environment to automate experimentation tasks. In particular, our environment supports: (i) scripting and running experiments on virtual labs, and (ii) collecting and analyzing data from the experiments. The current implementation of our environment supports virtual labs created with the authoring tool Easy Java/Javascript Simulations. Since there are public repositories with hundreds of freely available labs created with this tool, the potential applicability to our environment is considerable.

Electron Microscopy Lab

Science.gov Websites

Facilities Science Pillars Research Library Science Briefs Science News Science Highlights Lab Organizations Science Programs Applied Energy Programs Civilian Nuclear Energy Programs Laboratory Directed Research Science Seaborg Institute Fellows Conferences Research Opportunities Center for Integrated

A Closer Look at Visual Manuals.

ERIC Educational Resources Information Center

van der Meij, Hans

1996-01-01

Examines the visual manual genre, discussing main forms and functions of step-by-step and guided tour manuals in detail. Examines whether a visual manual helps computer users realize tasks faster and more accurately than a non-visual manual. Finds no effects on accuracy, but speedier task execution by 35% for visual manuals. Concludes there is no…

Product Manuals: A Consumer Perspective.

ERIC Educational Resources Information Center

Showers, Linda S.; And Others

1993-01-01

Qualitative analysis of insights from consumer focus groups on product manual usage reveals consumer perceptions and preferences regarding manual and safety message format. Results can be used to improve manual design and content. (JOW)

A Case Study of a High School Fab Lab

NASA Astrophysics Data System (ADS)

Lacy, Jennifer E.

This dissertation examines making and design-based STEM education in a formal makerspace. It focuses on how the design and implementation of a Fab Lab learning environment and curriculum affect how instructors and students see themselves engaging in science, and how the Fab Lab relates to the social sorting practices that already take place at North High School. While there is research examining design-based STEM education in informal and formal learning environments, we know little about how K-12 teachers define STEM in making activities when no university or museum partnership exists. This study sought to help fill this gap in the research literature. This case study of a formal makerspace followed instructors and students in one introductory Fab Lab course for one semester. Additional observations of an introductory woodworking course helped build the case and set it into the school context, and provided supplementary material to better understand the similarities and differences between the Fab Lab course and a more traditional design-based learning course. Using evidence from observational field notes, participant interviews, course materials, and student work, I found that the North Fab Lab relies on artifacts and rhetoric symbolic of science and STEM to set itself apart from other design-based courses at North High School. Secondly, the North Fab Lab instructors and students were unable to explain how what they were doing in the Fab Lab was science, and instead relied on vague and unsupported claims related to interdisciplinary STEM practices and dated descriptions of science. Lastly, the design and implementation of the Fab Lab learning environment and curriculum and its separation from North High School's low tech, design-based courses effectively reinforced social sorting practices and cultural assumptions about student work and intelligence.

Efficacy of complete decongestive therapy and manual lymphatic drainage on treatment-related lymphedema in breast cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koul, Rashmi; Dufan, Tarek; Russell, Catherine

2007-03-01

Objective: To evaluate the results of combined decongestive therapy and manual lymphatic drainage in patients with breast cancer-related lymphedema. Methods and Materials: The data from 250 patients were reviewed. The pre- and posttreatment volumetric measurements were compared, and the correlation with age, body mass index, and type of surgery, chemotherapy, and radiotherapy was determined. The Spearman correlation coefficients and Wilcoxon two-sample test were used for statistical analysis. Results: Of the 250 patients, 138 were included in the final analysis. The mean age at presentation was 54.3 years. Patients were stratified on the basis of the treatment modality used for breastmore » cancer management. Lymphedema was managed with combined decongestive therapy in 55%, manual lymphatic drainage alone in 32%, and the home program in 13%. The mean pretreatment volume of the affected and normal arms was 2929 and 2531 mL. At the end of 1 year, the posttreatment volume of the affected arm was 2741 mL. The absolute volume of the affected arm was reduced by a mean of 188 mL (p < 0.0001). The type of surgery (p = 0.0142), age (p = 0.0354), and body mass index (p < 0.0001) were related to the severity of lymphedema. Conclusion: Combined decongestive therapy and manual lymphatic drainage with exercises were associated with a significant reduction in the lymphedema volume.« less

Jefferson Lab Virtual Tour

ScienceCinema

None

2018-01-16

Take a virtual tour of the campus of Thomas Jefferson National Accelerator Facility. You can see inside our two accelerators, three experimental areas, accelerator component fabrication and testing areas, high-performance computing areas and laser labs.

The History of Science and Technology at Bell Labs

NASA Astrophysics Data System (ADS)

Bishop, David

2008-03-01

Over the last 80 years, Bell Labs has been one of the most scientifically and technologically productive research labs in the world. Inventions such as the transistor, laser, cell phone, solar cell, negative feedback amplifier, communications satellite and many others were made there. Scientific breakthroughs such as discovery of the Big Bang, the wave nature of the electron, electron localization and the fractional quantum hall effect were also made there making Bell Labs almost unique in terms of large impacts in both science and technology. In my talk, I will discuss the history of the lab, talk about the present and give some suggestions for how I see it evolving into the future.

Towards a Flexible Language Lab for Community Colleges.

ERIC Educational Resources Information Center

Conway, Diana

1992-01-01

Suggestions are offered for ways to modify a typical community college language laboratory to serve diverse student needs. The discussion is based on experiences of Anchorage Community College, which modeled its lab on a learning resources center rather than a traditional lab. (LB)

Introducing ADS Labs

NASA Astrophysics Data System (ADS)

Accomazzi, Alberto; Henneken, E.; Grant, C. S.; Kurtz, M. J.; Di Milia, G.; Luker, J.; Thompson, D. M.; Bohlen, E.; Murray, S. S.

2011-05-01

ADS Labs is a platform that ADS is introducing in order to test and receive feedback from the community on new technologies and prototype services. Currently, ADS Labs features a new interface for abstract searches, faceted filtering of results, visualization of co-authorship networks, article-level recommendations, and a full-text search service. The streamlined abstract search interface provides a simple, one-box search with options for ranking results based on a paper relevancy, freshness, number of citations, and downloads. In addition, it provides advanced rankings based on collaborative filtering techniques. The faceted filtering interface allows users to narrow search results based on a particular property or set of properties ("facets"), allowing users to manage large lists and explore the relationship between them. For any set or sub-set of records, the co-authorship network can be visualized in an interactive way, offering a view of the distribution of contributors and their inter-relationships. This provides an immediate way to detect groups and collaborations involved in a particular research field. For a majority of papers in Astronomy, our new interface will provide a list of related articles of potential interest. The recommendations are based on a number of factors, including text similarity, citations, and co-readership information. The new full-text search interface allows users to find all instances of particular words or phrases in the body of the articles in our full-text archive. This includes all of the scanned literature in ADS as well as a select portion of the current astronomical literature, including ApJ, ApJS, AJ, MNRAS, PASP, A&A, and soon additional content from Springer journals. Fulltext search results include a list of the matching papers as well as a list of "snippets" of text highlighting the context in which the search terms were found. ADS Labs is available at http://adslabs.org

Time Trials--An AP Physics Challenge Lab

ERIC Educational Resources Information Center

Jones, David

2009-01-01

I have come to the conclusion that for high school physics classroom and laboratory experiences, simpler is better! In this paper I describe a very simple and effective lab experience that my AP students have thoroughly enjoyed year after year. I call this lab exercise "Time Trials." The experiment is simple in design and it is a lot of fun for…

Elemental Chem Lab

ERIC Educational Resources Information Center

Franco Mariscal, Antonio Joaquin

2008-01-01

This educative material uses the symbols of 45 elements to spell the names of 32 types of laboratory equipment usually found in chemical labs. This teaching material has been divided into three puzzles according to the type of the laboratory equipment: (i) glassware as reaction vessels or containers; (ii) glassware for measuring, addition or…

Lab with Dad

ERIC Educational Resources Information Center

Havers, Brenda; Delmotte, Karen

2012-01-01

Family science nights are fantastic, but planning one can be overwhelming, especially when one considers the already overloaded schedule of a classroom teacher. To overcome this challenge, the authors--colleagues with a mutual love of science--developed a much simpler annual event called "Lab With Dad." The purpose was for one target age group of…

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program get an inside look at NASA Kennedy Space Center’s iconic Vehicle Assembly Building from the transfer aisle. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

Nurse Assistant in Acute, Home Health and Long-Term Care Settings. Instructor Manual [and] Student Manual.

ERIC Educational Resources Information Center

Winberg, Pat

This document consists of an instructor's manual and student manual for a nurse assistant curriculum. The instructor's manual provides answers to activity sheets and unit evaluations along with individual unit overviews. Suggested teaching strategies and audiovisual supplements are included for each lesson. The student manual contains eight units:…

Refractive index dispersion sensing using an array of photonic crystal resonant reflectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hermannsson, Pétur G.; Vannahme, Christoph; Smith, Cameron L. C.

2015-08-10

Refractive index sensing plays a key role in various environmental and biological sensing applications. Here, a method is presented for measuring the absolute refractive index dispersion of liquids using an array of photonic crystal resonant reflectors of varying periods. It is shown that by covering the array with a sample liquid and measuring the resonance wavelength associated with transverse electric polarized quasi guided modes as a function of period, the refractive index dispersion of the liquid can be accurately obtained using an analytical expression. This method is compact, can perform measurements at arbitrary number of wavelengths, and requires only amore » minute sample volume. The ability to sense a material's dispersion profile offers an added dimension of information that may be of benefit to optofluidic lab-on-a-chip applications.« less

Radiological control manual. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kloepping, R.

1996-05-01

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPPmore » and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.« less

Constructing the Components of a Lab Report Using Peer Review

ERIC Educational Resources Information Center

Berry, David E.; Fawkes, Kelli L.

2010-01-01

A protocol that emphasizes lab report writing using a piecemeal approach coupled with peer review is described. As the lab course progresses, the focus of the report writing changes sequentially through the abstract and introduction, the discussion, and the procedure. Two styles of lab programs are presented. One style rotates the students through…

Can Graduate Teaching Assistants Teach Inquiry-Based Geology Labs Effectively?

ERIC Educational Resources Information Center

Ryker, Katherine; McConnell, David

2014-01-01

This study examines the implementation of teaching strategies by graduate teaching assistants (GTAs) in inquiry-based introductory geology labs at a large research university. We assess the degree of inquiry present in each Physical Geology lab and compare and contrast the instructional practices of new and experienced GTAs teaching these labs. We…

Open web system of Virtual labs for nuclear and applied physics

NASA Astrophysics Data System (ADS)

Saldikov, I. S.; Afanasyev, V. V.; Petrov, V. I.; Ternovykh, M. Yu

2017-01-01

An example of virtual lab work on unique experimental equipment is presented. The virtual lab work is software based on a model of real equipment. Virtual labs can be used for educational process in nuclear safety and analysis field. As an example it includes the virtual lab called “Experimental determination of the material parameter depending on the pitch of a uranium-water lattice”. This paper included general description of this lab. A description of a database on the support of laboratory work on unique experimental equipment which is included this work, its concept development are also presented.

A randomized 3-month clinical comparison of a power toothbrush to a manual toothbrush in the reduction of gingivitis.

PubMed

Li, Zhen; He, Tao; Li, Chun; Sun, Lily; Chang, Jinlan; He, Yanyan; Zhao, Jizhi; Ji, Ning

2016-08-01

To compare the anti-gingivitis effect of a power toothbrush relative to a manual toothbrush control. This was a 3-month, randomized and controlled, single-center, parallel group, examiner-blinded clinical study. 123 Chinese adults in good general health and with at least 15 gingival bleeding sites, as measured by the Gingival Bleeding Index, were enrolled into the study. At baseline, pre-treatment gingivitis levels were assessed using the Mazza Bleeding Index. Subjects were then randomly assigned to receive either an oscillating-rotating power toothbrush [Oral-B Professional Care 7000 (D17u/EB17)] or a flat-trim manual toothbrush with tapered filaments (Lion Dentor Systema). Subjects brushed at home twice-daily with their assigned toothbrush and a marketed sodium fluoride dentifrice (Crest Cavity Protection dentifrice), and were reevaluated at Months 1, 2, and 3. 113 evaluable subjects completed the study. Both groups showed significant reductions in gingivitis from baseline for all time points measured (P< 0.001). At Months 1, 2 and 3, the power toothbrush demonstrated significantly greater gingivitis reductions of 7.11%, 9.20% and 8.47%, respectively, than the manual toothbrush (P< 0.01), and significantly fewer bleeding sites (17.3%, 23.9% and 24.3%, respectively, P< 0.05). No adverse events were reported or observed for either brush during the study. The power brush provided statistically significantly greater reductions in gingivitis compared with a manual toothbrush at Months 1, 2 and 3.

Intensive care unit depth of sleep: proof of concept of a simple electroencephalography index in the non-sedated

PubMed Central

2014-01-01

Introduction Intensive care unit (ICU) patients are known to experience severely disturbed sleep, with possible detrimental effects on short- and long- term outcomes. Investigation into the exact causes and effects of disturbed sleep has been hampered by cumbersome and time consuming methods of measuring and staging sleep. We introduce a novel method for ICU depth of sleep analysis, the ICU depth of sleep index (IDOS index), using single channel electroencephalography (EEG) and apply it to outpatient recordings. A proof of concept is shown in non-sedated ICU patients. Methods Polysomnographic (PSG) recordings of five ICU patients and 15 healthy outpatients were analyzed using the IDOS index, based on the ratio between gamma and delta band power. Manual selection of thresholds was used to classify data as either wake, sleep or slow wave sleep (SWS). This classification was compared to visual sleep scoring by Rechtschaffen & Kales criteria in normal outpatient recordings and ICU recordings to illustrate face validity of the IDOS index. Results When reduced to two or three classes, the scoring of sleep by IDOS index and manual scoring show high agreement for normal sleep recordings. The obtained overall agreements, as quantified by the kappa coefficient, were 0.84 for sleep/wake classification and 0.82 for classification into three classes (wake, non-SWS and SWS). Sensitivity and specificity were highest for the wake state (93% and 93%, respectively) and lowest for SWS (82% and 76%, respectively). For ICU recordings, agreement was similar to agreement between visual scorers previously reported in literature. Conclusions Besides the most satisfying visual resemblance with manually scored normal PSG recordings, the established face-validity of the IDOS index as an estimator of depth of sleep was excellent. This technique enables real-time, automated, single channel visualization of depth of sleep, facilitating the monitoring of sleep in the ICU. PMID:24716479

Inside Linden Lab

ERIC Educational Resources Information Center

Atkinson, Tom

2008-01-01

In this article, the author provides an overview of Second Life[trademark], or simply SL, which was developed at Linden Lab, a San Francisco-based corporation. SL is an online society within a threee-dimensional virtual world entirely built and owned by its residents, where they can explore, build, socialize and participate in their own economy.…

Powered versus manual toothbrushing for oral health.

PubMed

Yaacob, Munirah; Worthington, Helen V; Deacon, Scott A; Deery, Chris; Walmsley, A Damien; Robinson, Peter G; Glenny, Anne-Marie

2014-06-17

.50 (95% confidence interval (CI) -0.70 to -0.31); 40 trials, n = 2871) and long term (SMD -0.47 (95% CI -0.82 to -0.11; 14 trials, n = 978). These results correspond to an 11% reduction in plaque for the Quigley Hein index (Turesky) in the short term and 21% reduction long term. Both meta-analyses showed high levels of heterogeneity (I(2) = 83% and 86% respectively) that was not explained by the different powered toothbrush type subgroups.With regard to gingivitis, there is moderate quality evidence that powered toothbrushes again provide a statistically significant benefit when compared with manual toothbrushes both in the short term (SMD -0.43 (95% CI -0.60 to -0.25); 44 trials, n = 3345) and long term (SMD -0.21 (95% CI -0.31 to -0.12); 16 trials, n = 1645). This corresponds to a 6% and 11% reduction in gingivitis for the Löe and Silness index respectively. Both meta-analyses showed high levels of heterogeneity (I(2) = 82% and 51% respectively) that was not explained by the different powered toothbrush type subgroups.The number of trials for each type of powered toothbrush varied: side to side (10 trials), counter oscillation (five trials), rotation oscillation (27 trials), circular (two trials), ultrasonic (seven trials), ionic (four trials) and unknown (five trials). The greatest body of evidence was for rotation oscillation brushes which demonstrated a statistically significant reduction in plaque and gingivitis at both time points. Powered toothbrushes reduce plaque and gingivitis more than manual toothbrushing in the short and long term. The clinical importance of these findings remains unclear. Observation of methodological guidelines and greater standardisation of design would benefit both future trials and meta-analyses.Cost, reliability and side effects were inconsistently reported. Any reported side effects were localised and only temporary.

Introductory labs; what they don't, should, and can teach (and why)

NASA Astrophysics Data System (ADS)

Wieman, Carl

2016-03-01

Introductory physics labs are widely used and expensive. They have a wide variety of potential learning goals, but these are seldom specified and less often measured if they are achieved. We cover three different research projects on introductory labs: 1) We have done cognitive task analyses of both experimental research in physics and instructional labs. The striking differences explain much of the unhappiness expressed by students with labs: 2) We have measured the effectiveness of two introductory physics lab courses specifically intended to teach the physics content covered in standard introductory courses on mechanics and E & M. As measured by course exams, the benefit is 0 +/-2% for both. 3) We show how it is possible to use lab courses to teach students to correctly evaluate physical models with uncertain data. Such quantitative critical thinking is an important skill that is not learned in typical lab courses, but is well learned by our modified lab instruction.

In-Home Respite Care Program Development. Background. Coordinator's Manual. Training Manual.

ERIC Educational Resources Information Center

Parham, J. D.; And Others

This volume consists of a background discussion, coordinator's manual, and training manual dealing with developing programs for the in-home respite care (IHRC) of the developmentally disabled. Addressed in the background information unit are the nature of developmental disabilities; program variables, planning, and funding; and practical…

Sign language indexation within the MPEG-7 framework

NASA Astrophysics Data System (ADS)

Zaharia, Titus; Preda, Marius; Preteux, Francoise J.

1999-06-01

In this paper, we address the issue of sign language indexation/recognition. The existing tools, like on-like Web dictionaries or other educational-oriented applications, are making exclusive use of textural annotations. However, keyword indexing schemes have strong limitations due to the ambiguity of the natural language and to the huge effort needed to manually annotate a large amount of data. In order to overcome these drawbacks, we tackle sign language indexation issue within the MPEG-7 framework and propose an approach based on linguistic properties and characteristics of sing language. The method developed introduces the concept of over time stable hand configuration instanciated on natural or synthetic prototypes. The prototypes are indexed by means of a shape descriptor which is defined as a translation, rotation and scale invariant Hough transform. A very compact representation is available by considering the Fourier transform of the Hough coefficients. Such an approach has been applied to two data sets consisting of 'Letters' and 'Words' respectively. The accuracy and robustness of the result are discussed and a compete sign language description schema is proposed.

Comparative evaluation of probing depth and clinical attachment level using a manual probe and Florida probe.

PubMed

Kour, Amandeep; Kumar, Ashish; Puri, Komal; Khatri, Manish; Bansal, Mansi; Gupta, Geeti

2016-01-01

To compare and evaluate the intra- and inter-examiner efficacy and reproducibility of the first-generation manual (Williams) probe and the third-generation Florida probe in terms of measuring pocket probing depth (PD) and clinical attachment level (CAL). Forty subjects/4000 sites were included in this comparative, cross-sectional study. Group- and site-wise categorizations were done. Based on gingival index, PD, and CAL, patients were divided into four groups, i.e., periodontally healthy, gingivitis, mild to moderate periodontitis, and severe periodontitis. Further, based on these parameters, a total of 4000 sites, with 1000 sites in each category randomly selected from these 40 patients, were taken. Full mouth PD and CAL measurements were recorded with two probes, by Examiner 1 and on Ramfjord teeth by Examiner 2. Full mouth and Ramfjord teeth group- and site-wise PD obtained with the manual probe by both the examiners were statistically significantly deeper than that obtained with the Florida probe. The full mouth and Ramfjord teeth mean CAL measurement by Florida probe was higher as compared to manual probe in mild to moderate periodontitis group and sites, whereas in severe periodontitis group and sites, manual probe recorded higher CAL as compared to Florida probe. Mean PD and CAL measurements were deeper with the manual probe as compared to the Florida probe in all the groups and sites, except for the mild-moderate periodontitis group and sites where the CAL measurements with the manual probe were less than the Florida probe. Manual probe was more reproducible and showed less interexaminer variability as compared to the Florida probe.

Behind the Scenes at Berkeley Lab - The Mechanical Fabrication Facility

ScienceCinema

Wells, Russell; Chavez, Pete; Davis, Curtis; Bentley, Brian

2018-04-16

Part of the Behind the Scenes series at Berkeley Lab, this video highlights the lab's mechanical fabrication facility and its exceptional ability to produce unique tools essential to the lab's scientific mission. Through a combination of skilled craftsmanship and precision equipment, machinists and engineers work with scientists to create exactly what's needed - whether it's measured in microns or meters.

14 CFR 121.135 - Manual contents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Manual contents. 121.135 Section 121.135 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Manual Requirements § 121.135 Manual contents. (a) Each manual...

Practical Clinical Training in Skills Labs: Theory and Practice

PubMed Central

Bugaj, T. J.; Nikendei, C.

2016-01-01

Today, skills laboratories or “skills labs”, i.e. specific practical skill training facilities, are a firmly established part of medical education offering the possibility of training clinical procedures in a safe and fault-forging environment prior to real life application at bedside or in the operating room. Skills lab training follows a structured teaching concept, takes place under supervision and in consideration of methodological-didactic concepts, ideally creating an atmosphere that allows the repeated, anxiety- and risk-free practice of targeted skills. In this selective literature review, the first section is devoted to (I) the development and dissemination of the skills lab concept. There follows (II) an outline of the underlying idea and (III) an analysis of key efficacy factors. Thereafter, (IV) the training method’s effectiveness and transference are illuminated, before (V) the use of student tutors, in the sense of peer-assisted-learning, in skills labs is discussed separately. Finally, (VI) the efficiency of the skills lab concept is analyzed, followed by an outlook on future developments and trends in the field of skills lab training. PMID:27579363

EarthLabs - Investigating Hurricanes: Earth's Meteorological Monsters

NASA Astrophysics Data System (ADS)

McDaris, J. R.; Dahlman, L.; Barstow, D.

2007-12-01

Earth science is one of the most important tools that the global community needs to address the pressing environmental, social, and economic issues of our time. While, at times considered a second-rate science at the high school level, it is currently undergoing a major revolution in the depth of content and pedagogical vitality. As part of this revolution, labs in Earth science courses need to shift their focus from cookbook-like activities with known outcomes to open-ended investigations that challenge students to think, explore and apply their learning. We need to establish a new model for Earth science as a rigorous lab science in policy, perception, and reality. As a concerted response to this need, five states, a coalition of scientists and educators, and an experienced curriculum team are creating a national model for a lab-based high school Earth science course named EarthLabs. This lab course will comply with the National Science Education Standards as well as the states' curriculum frameworks. The content will focus on Earth system science and environmental literacy. The lab experiences will feature a combination of field work, classroom experiments, and computer access to data and visualizations, and demonstrate the rigor and depth of a true lab course. The effort is being funded by NOAA's Environmental Literacy program. One of the prototype units of the course is Investigating Hurricanes. Hurricanes are phenomena which have tremendous impact on humanity and the resources we use. They are also the result of complex interacting Earth systems, making them perfect objects for rigorous investigation of many concepts commonly covered in Earth science courses, such as meteorology, climate, and global wind circulation. Students are able to use the same data sets, analysis tools, and research techniques that scientists employ in their research, yielding truly authentic learning opportunities. This month-long integrated unit uses hurricanes as the story line by

[Manual trigger point therapy of shoulder pain : Randomized controlled study of effectiveness].

PubMed

Sohns, S; Schnieder, K; Licht, G; von Piekartz, H

2016-12-01

Although chronic shoulder pain is highly prevalent and myofascial trigger points (mTrP) are thought to be found in the majority of patients with shoulder complaints, the influence on the pain mechanism remains unclear. There are only very few controlled clinical studies on the effects of manual trigger point compression therapy. This randomized controlled trial (RCT) compared the short-term effects of manual trigger point compression therapy (n = 6) with manual sham therapy (n = 6) in patients with unilateral shoulder pain due to myofascial syndrome (MFS). The measurement data were collected before and after two sessions of therapy. Pressure pain thresholds (PPT) of mTrP and symmetrically located points on the asymptomatic side were measured together with neutral points in order to detect a potential unilateral or generalized hyperalgesia. Additionally, the pain was assessed on a visual analog scale (VAS) at rest and during movement and the neck disability index (NDI) and disabilities of the arm, shoulder and hand (DASH) questionnaires were also completed and evaluated. Both treatment modalities led to a significant improvement; however, the manual trigger point compression therapy was significantly more effective in comparison to sham therapy, as measured by different parameters. The significant improvement of PPT values in the interventional group even at sites that were not directly treated, indicates central mechanisms in pain threshold modulation induced by manual compression therapy. The weaker but still measurable effects of sham therapy might be explained by the sham modality being a hands on technique or by sufficient stimulation of the trigger point region during the diagnostics and PPT measurements.

Stream piracy in the Black Hills: A geomorphology lab exercise

USGS Publications Warehouse

Zaprowski, B.J.; Evenson, E.B.; Epstein, J.B.

2002-01-01

The Black Hills of South Dakota exhibits many fine examples of stream piracy that are very suitable for teaching geomorphology lab exercises. This lab goes beyond standard topographic map interpretation by using geologic maps, well logs, gravel provenance and other types of data to teach students about stream piracy. Using a step-by-step method in which the lab exercises ramp up in difficulty, students hone their skills in deductive reasoning and data assimilation. The first exercises deal with the identification of stream piracy at a variety of spatial scales and the lab culminates with an exercise on landscape evolution and drainage rearrangement.

Creative Science Teaching Labs: New Dimensions in CPD

ERIC Educational Resources Information Center

Chappell, Kerry; Craft, Anna

2009-01-01

This paper offers analysis and evaluation of "Creative Science Teaching (CST) Labs III", a unique and immersive approach to science teachers' continuing professional development (CPD) designed and run by a London-based organisation, Performing Arts Labs (PAL), involving specialists from the arts, science and technology as integral. Articulating…

Online Writing Labs as Sites for Community Engagement

ERIC Educational Resources Information Center

Wells, Jaclyn Michelle

2010-01-01

This dissertation investigates the Community Writing and Education Station (CWEST), a community engagement project that partners a community adult basic literacy program with a university writing lab. The author argues that the community and university partners, the Lafayette Adult Resource Academy (LARA) and the Purdue Writing Lab, offer positive…

Berkeley Lab's Saul Perlmutter wins Nobel Prize in Physics | Berkeley Lab

Science.gov Websites

astrophysics, dark energy, physics Connect twitter instagram LinkedIn facebook youtube This form needs Berkeley Lab's Saul Perlmutter wins Nobel Prize in Physics News Release Paul Preuss 510-486-6249 * October professor of physics at the University of California at Berkeley, has won the 2011 Nobel Prize in Physics

THERM 5 / WINDOW 5 NFRC simulation manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, Robin; Kohler, Christian; Arasteh, Dariush

This document, the ''THERM 5/WINDOW 5 NFRC Simulation Manual', discusses how to use the THERM and WINDOW programs to model products for NFRC certified simulations and assumes that the user is already familiar with those programs. In order to learn how to use these programs, it is necessary to become familiar with the material in both the ''THERM User's Manual'' and the ''WINDOW User's Manual''. In general, this manual references the User's Manuals rather than repeating the information. If there is a conflict between either of the User Manual and this ''THERM 5/''WINDOW 5 NFRC Simulation Manual'', the ''THERM 5/WINDOWmore » 5 NFRC Simulation Manual'' takes precedence. In addition, if this manual is in conflict with any NFRC standards, the standards take precedence. For example, if samples in this manual do not follow the current taping and testing NFRC standards, the standards not the samples in this manual, take precedence.« less

Automatic generation of the index of productive syntax for child language transcripts.

PubMed

Hassanali, Khairun-nisa; Liu, Yang; Iglesias, Aquiles; Solorio, Thamar; Dollaghan, Christine

2014-03-01

The index of productive syntax (IPSyn; Scarborough (Applied Psycholinguistics 11:1-22, 1990) is a measure of syntactic development in child language that has been used in research and clinical settings to investigate the grammatical development of various groups of children. However, IPSyn is mostly calculated manually, which is an extremely laborious process. In this article, we describe the AC-IPSyn system, which automatically calculates the IPSyn score for child language transcripts using natural language processing techniques. Our results show that the AC-IPSyn system performs at levels comparable to scores computed manually. The AC-IPSyn system can be downloaded from www.hlt.utdallas.edu/~nisa/ipsyn.html .

ERLN Technical Support for Labs

EPA Pesticide Factsheets

The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

GeneLab: A Systems Biology Platform for Spaceflight Omics Data

NASA Technical Reports Server (NTRS)

Reinsch, Sigrid S.; Lai, San-Huei; Chen, Rick; Thompson, Terri; Berrios, Daniel; Fogle, Homer; Marcu, Oana; Timucin, Linda; Chakravarty, Kaushik; Coughlan, Joseph

2015-01-01

NASA's mission includes expanding our understanding of biological systems to improve life on Earth and to enable long-duration human exploration of space. Resources to support large numbers of spaceflight investigations are limited. NASA's GeneLab project is maximizing the science output from these experiments by: (1) developing a unique public bioinformatics database that includes space bioscience relevant "omics" data (genomics, transcriptomics, proteomics, and metabolomics) and experimental metadata; (2) partnering with NASA-funded flight experiments through bio-sample sharing or sample augmentation to expedite omics data input to the GeneLab database; and (3) developing community-driven reference flight experiments. The first database, GeneLab Data System Version 1.0, went online in April 2015. V1.0 contains numerous flight datasets and has search and download capabilities. Version 2.0 will be released in 2016 and will link to analytic tools. In 2015 Genelab partnered with two Biological Research in Canisters experiments (BBRIC-19 and BRIC-20) which examine responses of Arabidopsis thaliana to spaceflight. GeneLab also partnered with Rodent Research-1 (RR1), the maiden flight to test the newly developed rodent habitat. GeneLab developed protocols for maxiumum yield of RNA, DNA and protein from precious RR-1 tissues harvested and preserved during the SpaceX-4 mission, as well as from tissues from mice that were frozen intact during spaceflight and later dissected. GeneLab is establishing partnerships with at least three planned flights for 2016. Organism-specific nationwide Science Definition Teams (SDTs) will define future GeneLab dedicated missions and ensure the broader scientific impact of the GeneLab missions. GeneLab ensures prompt release and open access to all high-throughput omics data from spaceflight and ground-based simulations of microgravity and radiation. Overall, GeneLab will facilitate the generation and query of parallel multi-omics data, and

Letters Home as an Alternative to Lab Reports

ERIC Educational Resources Information Center

Lane, W. Brian

2014-01-01

The traditional lab report is known to create several pedagogical shortcomings in the introductory physics course, particularly with regard to promoting student engagement and encouraging quality writing. This paper discusses the use of a "letter home" written to a non-physicist as an alternative to lab reports that creates a more…

The national labs and their future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crease, R.P.

National laboratories of the USA, born with the atomic age and raised to prominence by the need for scientific superiority during the long Cold War, are facing the most critical challenge: how best to support the nation's current need to improve its international competitiveness through superior technology The charge that the national laboratories are [open quotes]Cold War relics[close quotes] that have outlived their usefulness is based on a misunderstanding of their mission, says Robert P. Crease, historian for Brookhaven National laboratory. Three of the labs-Los Alamos, Sandia, and Lawrence Livermore- are weapons laboratories and their missions must change. Oak Ridge,more » Argonne, and Brookhaven laboratories are multipurpose: basic research facilities with a continuing role in the world of science The national laboratory system traces its origins to the Manhattan Project. Over the next half-century, America's national labs grew into part of the most effective scientific establishment in the world, a much-copied model for management of large-scale scientific programs. In the early years, each lab defined a niche in the complex world of reactors, accelerators, and high-energy proton and electron physics. In the 1970s, several labs worked on basic energy sciences to help solve a national energy crisis. Today, the labs are pressured to do more applied research-research to transfer to the private sector and will have to respond by devising more effective ways of coordinating basic and applied research. But, Crease warns, [open quotes]It also will be essential that any commitment to applied research not take place at the cost of reducing the wellspring of basic research from which so much applied research flows. [open quotes]Making a solid and persuasive case for the independent value of basic research, and for their own role in that enterprise, may be the most important task facing the laboratories in their next half-century,[close quotes].« less

Industrial labor relations manual

NASA Technical Reports Server (NTRS)

1992-01-01

The NASA Industrial Labor Relations Manual provides internal guidelines and procedures to assist NASA Field Installations in dealing with contractor labor management disputes, Service Contract Act variance hearings, and to provide access of Labor Union Representatives to NASA for the purpose of maintaining schedules and goals in connection with vital NASA programs. This manual will be revised by page changes as revisions become necessary. Initial distribution of this manual has been made to NASA Headquarters and Field Installations.

Biosafety Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, Bruce W.

2010-05-18

Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may causemore » disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.« less

49 CFR 383.131 - Test manuals.

Code of Federal Regulations, 2014 CFR

2014-10-01

... knowledge and skills test examiners. To be pre-approved by FMCSA, the examiner information manual must be... 49 Transportation 5 2014-10-01 2014-10-01 false Test manuals. 383.131 Section 383.131... STANDARDS; REQUIREMENTS AND PENALTIES Tests § 383.131 Test manuals. (a) Driver information manual. (1) A...

49 CFR 383.131 - Test manuals.

Code of Federal Regulations, 2011 CFR

2011-10-01

... knowledge and skills test examiners. To be pre-approved by FMCSA, the examiner information manual must be... 49 Transportation 5 2011-10-01 2011-10-01 false Test manuals. 383.131 Section 383.131... STANDARDS; REQUIREMENTS AND PENALTIES Tests § 383.131 Test manuals. (a) Driver information manual. (1) A...

49 CFR 383.131 - Test manuals.

Code of Federal Regulations, 2013 CFR

2013-10-01

... knowledge and skills test examiners. To be pre-approved by FMCSA, the examiner information manual must be... 49 Transportation 5 2013-10-01 2013-10-01 false Test manuals. 383.131 Section 383.131... STANDARDS; REQUIREMENTS AND PENALTIES Tests § 383.131 Test manuals. (a) Driver information manual. (1) A...

Rust Contamination from Water Leaks in the Cosmic Dust Lab and Lunar and Meteorite Thin Sections Labs at Johnson Space Center

NASA Technical Reports Server (NTRS)

Kent, J. J.; Berger, E. L.; Fries, M. D.; Bastien, R.; McCubbin, F. M.; Pace, L.; Righter, K.; Sutter, B.; Zeigler, R. A.; Zolensky, M.

2017-01-01

On the early morning of September 15th, 2016, on the first floor of Building 31 at NASA-Johnson Space Center, the hose from a water chiller ruptured and began spraying water onto the floor. The water had been circulating though old metal pipes, and the leaked water contained rust-colored particulates. The water flooded much of the western wing of the building's ground floor before the leak was stopped, and it left behind a residue of rust across the floor, most notably in the Apollo and Meteorite Thin Section Labs and Sample Preparation Lab. No samples were damaged in the event, and the affected facilities are in the process of remediation. At the beginning of 2016, a separate leak occurred in the Cosmic Dust Lab, located in the same building. In that lab, a water leak occurred at the bottom of the sink used to clean the lab's tools and containers with ultra-pure water. Over years of use, the ultra-pure water eroded the metal sink piping and leaked water onto the inside of the lab's flow bench. This water also left behind a film of rusty material. The material was cleaned up and the metal piping was replaced with PVC pipe and sealed with Teflon plumber's tape. Samples of the rust detritus were collected from both incidents. These samples were imaged and analyzed to determine their chemical and mineralogical compositions. The purpose of these analyses is to document the nature of the detritus for future reference in the unlikely event that these materials occur as contaminants in the Cosmic Dust samples or Apollo or Meteorite thin sections.

Transition from manual to automatic rutting measurements : effect on pavement serviceability index values.

DOT National Transportation Integrated Search

2010-06-01

The Pavement Serviceability Index (pSn is used by New Mexico Department of Transportation : (NMDOT) to express the serviceability level of a pavement section at the network level. The PSI : is calculated with distress ratings (including rutting) and ...

Ergonomics and human factors in endoscopic surgery: a comparison of manual vs telerobotic simulation systems.

PubMed

Lee, E C; Rafiq, A; Merrell, R; Ackerman, R; Dennerlein, J T

2005-08-01

Minimally invasive surgical techniques expose surgeons to a variety of occupational hazards that may promote musculoskeletal disorders. Telerobotic systems for minimally invasive surgery may help to reduce these stressors. The objective of this study was to compare manual and telerobotic endoscopic surgery in terms of postural and mental stress. Thirteen participants with no experience as primary surgeons in endoscopic surgery performed a set of simulated surgical tasks using two different techniques--a telerobotic master--slave system and a manual endoscopic surgery system. The tasks consisted of passing a soft spherical object through a series of parallel rings, suturing along a line 5-cm long, running a 32-in ribbon, and cannulation. The Job Strain Index (JSI) and Rapid Upper Limb Assessment (RULA) were used to quantify upper extremity exposure to postural and force risk factors. Task duration was quantified in seconds. A questionnaire provided measures of the participants' intuitiveness and mental stress. The JSI and RULA scores for all four tasks were significantly lower for the telerobotic technique than for the manual one. Task duration was significantly longer for telerobotic than for manual tasks. Participants reported that the telerobotic technique was as intuitive as, and no more stressful than, the manual technique. Given identical tasks, the time to completion is longer using the telerobotic technique than its manual counterpart. For the given simulated tasks in the laboratory setting, the better scores for the upper extremity postural analysis indicate that telerobotic surgery provides a more comfortable environment for the surgeon without any additional mental stress.

Tennessee environmental procedures manual

DOT National Transportation Integrated Search

2007-04-16

The Tennessee Environmental Procedures Manual (TEPM or manual) provides guidance for the preparation of environmental analysis and documentation for federally funded and state-funded transportation projects. /Abstract from report, p. I-1/

Development and psychometrics of the five item daily index in a psychiatric sample.

PubMed

Dyer, Kale; Hooke, Geoff; Page, Andrew C

2014-01-01

Effective treatment of affective disorders requires the ability to reliably monitor patient progress and outcome. The current study aimed to establish the Daily Index-5 (DI-5) as a psychometrically sound and clinically valid measure of treatment response in psychiatric care for use as a companion measure with the WHO Wellbeing Index (WHO-5; Bech et al., 1996. Psychother. Psychosom. 65, 183-190.). Eight hundred and ninety four consecutive inpatients and day-patients at a psychiatric facility completed the DI-5, WHO-5, SF-36 (Ware et al., 1993. SF-36 Health Survey: Manual and Interpretation Guide. The Health Institute, New England Medical Centre, Boston, MA.) and DASS-21 (Lovibond and Lovibond, 1995b. Manual for the Depression Anxiety Stress Scales. Psychology Foundation, Sydney, Australia.; Ware et al., 1993. SF-36 Health Survey: Manual and Interpretation Guide. The Health Institute, New England Medical Centre, Boston, MA.) routinely during treatment. The DI-5 was shown to be a measure with high reliability and validity. In addition criteria for clinically significant recovery are presented with an example implementation of a Clinical Significance Monitoring system. Finally, the latent structure of the DI-5 is established as a uni-dimensional index of affective disorder. The results may be generalized to samples with primary diagnoses of depressive and/or anxiety disorders though assessment of the DI-5 as a measure of treatment response is warranted in patients with other primary diagnoses. The current study indicates that the DI-5 is a quick to administer and interpret, reliable and valid measure for assessing patient outcome that is appropriate for use in monitoring patient change. © 2013 Published by Elsevier B.V.

Macromolecules Inquiry: Transformation of a Standard Biochemistry Lab

ERIC Educational Resources Information Center

Unsworth, Elizabeth

2014-01-01

Identification of macromolecules in food is a standard introductory high school biology lab. The intent of this article is to describe the conversion of this standard cookbook lab into an inquiry investigation. Instead of verifying the macromolecules found in food, students use their knowledge of the macromolecules in food to determine the…

Personal Adult Learning Lab (Pall). Implications for Practice.

ERIC Educational Resources Information Center

Klippel, Judith A.; And Others

The Personal Adult Learning Lab was establsiehd at the Georgia Center for Continuing Education (GCCE) at the University of Georgia to serve self-directed adult learners and conduct research on self-directed learning. The lab allows adult learners to design, conduct, and evaluate their personal learning experiences while proceeding at their own…

ACT Plan: Technical Manual. 2013/2014

ERIC Educational Resources Information Center

ACT, Inc., 2013

2013-01-01

This manual contains information about the American College Test (ACT) Plan® program. The principal focus of this manual is to document the Plan program's technical adequacy in light of its intended purposes. This manual supersedes the 2011 edition. The content of this manual responds to requirements of the testing industry as established in the…

The Living Labs: Innovation in Real-Life Settings

ERIC Educational Resources Information Center

Hawk, Nathan; Bartle, Gamin; Romine, Martha

2012-01-01

The living lab (LL) is an open innovation ecosystem serving to provide opportunities for local stakeholders to practice research and to experiment with meaningful improvements for cities and other organizations. Living labs aim at involving the user as a cocreator. In this article the relationship between the LLs and a variety of stakeholders is…

Glucose in Urine Test: MedlinePlus Lab Test Information

MedlinePlus

... Lab Tests Online [Internet]. American Association for Clinical Chemistry; c2001–2017. Diabetes [updated 2017 Jan 15; cited ... Lab Tests Online [Internet]. American Association for Clinical Chemistry; c2001–2017. Glucose Tests: Common Questions [updated 2017 ...

Performance of an Automated Versus a Manual Whole-Body Magnetic Resonance Imaging Workflow.

PubMed

Stocker, Daniel; Finkenstaedt, Tim; Kuehn, Bernd; Nanz, Daniel; Klarhoefer, Markus; Guggenberger, Roman; Andreisek, Gustav; Kiefer, Berthold; Reiner, Caecilia S

2018-04-24

The aim of this study was to evaluate the performance of an automated workflow for whole-body magnetic resonance imaging (WB-MRI), which reduces user interaction compared with the manual WB-MRI workflow. This prospective study was approved by the local ethics committee. Twenty patients underwent WB-MRI for myopathy evaluation on a 3 T MRI scanner. Ten patients (7 women; age, 52 ± 13 years; body weight, 69.9 ± 13.3 kg; height, 173 ± 9.3 cm; body mass index, 23.2 ± 3.0) were examined with a prototypical automated WB-MRI workflow, which automatically segments the whole body, and 10 patients (6 women; age, 35.9 ± 12.4 years; body weight, 72 ± 21 kg; height, 169.2 ± 10.4 cm; body mass index, 24.9 ± 5.6) with a manual scan. Overall image quality (IQ; 5-point scale: 5, excellent; 1, poor) and coverage of the study volume were assessed by 2 readers for each sequence (coronal T2-weighted turbo inversion recovery magnitude [TIRM] and axial contrast-enhanced T1-weighted [ce-T1w] gradient dual-echo sequence). Interreader agreement was evaluated with intraclass correlation coefficients. Examination time, number of user interactions, and MR technicians' acceptance rating (1, highest; 10, lowest) was compared between both groups. Total examination time was significantly shorter for automated WB-MRI workflow versus manual WB-MRI workflow (30.0 ± 4.2 vs 41.5 ± 3.4 minutes, P < 0.0001) with significantly shorter planning time (2.5 ± 0.8 vs 14.0 ± 7.0 minutes, P < 0.0001). Planning took 8% of the total examination time with automated versus 34% with manual WB-MRI workflow (P < 0.0001). The number of user interactions with automated WB-MRI workflow was significantly lower compared with manual WB-MRI workflow (10.2 ± 4.4 vs 48.2 ± 17.2, P < 0.0001). Planning efforts were rated significantly lower by the MR technicians for the automated WB-MRI workflow than for the manual WB-MRI workflow (2.20 ± 0.92 vs 4.80 ± 2.39, respectively; P = 0.005). Overall IQ was similar

Practices & Procedures of Mason Tending I & II. Instructor Manual. Trainee Manual.

ERIC Educational Resources Information Center

Laborers-AGC Education and Training Fund, Pomfret Center, CT.

This packet consists of the instructor and trainee manuals for two courses: practices and procedures of mason tending I and II. The instructor manual for mason tending I contains a schedule for a 40-hour, 5-day course and instructor outline. The outline provides a step-by-step description of the instructor's activities and includes answer sheets…

Stereotactic radiosurgery for trigeminal neuralgia utilizing the BrainLAB Novalis system.

PubMed

Zahra, Hadi; Teh, Bin S; Paulino, Arnold C; Yoshor, Daniel; Trask, Todd; Baskin, David; Butler, E Brian

2009-12-01

Stereotactic radiosurgery (SRS) is one of the least invasive treatments for trigeminal neuralgia (TN). To date, most reports have been about Cobalt-based treatments (i.e., Gamma Knife) with limited data on image-guided stereotactic linear accelerator treatments. We describe our initial experience of using BrainLAB Novalis stereotactic system for the radiosurgical treatment of TN. A total of 20 patients were treated between July 2004 and February 2007. Each SRS procedure was performed using the BrainLAB Novalis System. Thin cuts MRI images of 1.5 mm thickness were acquired and fused with the simulation CT of each patient. Majority of the patients received a maximum dose of 90 Gy. The median brainstem dose to 1.0 cc and 0.1 cc was 2.3 Gy and 13.5 Gy, respectively. In addition, specially acquired three-dimensional fast imaging sequence employing steady-state acquisition (FIESTA) MRI was utilized to improve target delineation of the trigeminal proximal nerve root entry zone. Barrow Neurological Index (BNI) pain scale for TN was used for assessing treatment outcome. At a median follow-up time of 14.2 months, 19 patients (95%) reported at least some improvement in pain. Eight (40%) patients were completely pain-free and stopped all medications (BNI Grade I) while another 2 (10%) patients also stopped medications but reported occasional pain (BNI Grade II). Another 2 (10%) patients reported no pain and 7 (35%) patients only occasional pain while continuing medications, BNI Grade IIIA and IIIB, respectively. Median time to pain control was 8.5 days (range: 1-70 days). No patient reported severe pain, worsening pain or any pain not controlled on their previously taken medication. Intermittent or persistent facial numbness following treatments occurred in 35% of patients. No other complications were reported. Stereotactic radiosurgery using the BrainLAB Novalis system is a safe and effective treatment for TN. This information is important as more centers are obtaining image

DESIGN MANUAL: PHOSPHORUS REMOVAL

EPA Science Inventory

This manual summarizes process design information for the best developed methods for removing phosphorus from wastewater. his manual discusses several proven phosphorus removal methods, including phosphorus removal obtainable through biological activity as well as chemical precip...

Meta-tips for lab-on-fiber optrodes

NASA Astrophysics Data System (ADS)

Principe, M.; Consales, M.; Micco, A.; Crescitelli, A.; Castaldi, G.; Esposito, E.; La Ferrara, V.; Cutolo, A.; Galdi, V.; Cusano, A.

2016-05-01

We realize the first optical-fiber "meta-tip" that integrates a metasurface on the tip of an optical fiber. In our proposed configuration a Babinet-inverted plasmonic metasurface is fabricated by patterning (via focused-ion-beam) an array of rectangular aperture nanoantennas in a thin gold film. Via spatial modulation of the nanoantennas size, we properly tune their resonances so as to impress abrupt arbitrary phase variations in the transmitted field wavefront. As a proof-of-principle, we fabricate and characterize several prototypes implementing in the near-infrared the beam-steering with various angles. We also explore the limit case where surface waves are excited, and its capability to work as refractive index sensors. Notably, its sensitivity overwhelms that of the corresponding gradient-free plasmonic array, thus paving the way to the use of metasurfaces for label-free chemical and biological sensing. Our experimental results, in fairly good agreement with numerical predictions, demonstrate the practical feasibility of the meta-tip concept, and set the stage for the integration of metasurfaces, and their exceptional capabilities to manipulate light, in fiber-optics technological platforms, within the emerging "lab-on-fiber" paradigm.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Emergency Diversity and Inclusion Committee Members Lab Contacts Resources & Operations Acknowledging ; Finance Templates Travel One-Stop Personnel Resources Committees In Case of Emergency Looking for MSD0010

What Is LAB and Why Was It Renormed?

ERIC Educational Resources Information Center

Abbott, Muriel

A report on the Language Assessment Battery (LAB) explains, in question-and-answer form, the causes and results of some changes made in the test norms. The LAB is a test of communicative language competence, written in English and Spanish versions and used for student placement in the New York City Public Schools. The report describes the test…

Solar University-National Lab Ultra-Effective Program | Photovoltaic

Science.gov Websites

Lab Ultra-Effective Program Solar University-National lab Ultra-effective Program (SUN UP) was created scientists arise out of long-standing collaborations. SUN UP was created to facilitate these interactions of a young man working in a laboratory setting with equipment. The goal of SUN UP is to increase the

FOREWORD: Jefferson Lab: A Long Decade of Physics

NASA Astrophysics Data System (ADS)

Montgomery, Hugh

2011-04-01

Jefferson Lab Jefferson Lab was created in 1984 and started operating in about 1996. 2011 is an appropriate time to try to take a look at the results that have appeared, what has been learned, and what has been exciting for our scientific community. Rather than attempt to construct a coherent view with a single author or at least a small number, we have, instead, invited small groups of people who have been intimately involved in the work itself to make contributions. These people are accelerator experts, experimentalists and theorists, staff and users. We have, in the main, sought reviews of the actual sub-fields. The primary exception is the first paper, which sets the scene as it was, in one person's view, at the beginning of Jefferson Lab. In reviewing the material as it appeared, I was impressed by the breadth of the material. Major advances are documented from form factors to structure functions, from spectroscopy to physics beyond the standard model of nuclear and particle physics. Recognition of the part played by spin, the helicities of the beams, the polarizations of the targets, and the polarizations of final state particles, is inescapable. Access to the weak interaction amplitudes through measurements of the parity violating asymmetries has led to quantification of the strange content of the nucleon and the neutron radius of lead, and to measurements of the electroweak mixing angle. Lattice QCD calculations flourished and are setting the platform for understanding of the spectroscopy of baryons and mesons. But the star of the game was the accelerator. Its performance enabled the physics and also the use of the technology to generate a powerful free electron laser. These important pieces of Jefferson Lab physics are given their place. As the third Director of Jefferson Lab, and on behalf of the other physicists and others presently associated with the lab, I would like to express my admiration and gratitude for the efforts of the directors, chief

StagLab: Post-Processing and Visualisation in Geodynamics

NASA Astrophysics Data System (ADS)

Crameri, Fabio

2017-04-01

Despite being simplifications of nature, today's Geodynamic numerical models can, often do, and sometimes have to become very complex. Additionally, a steadily-increasing amount of raw model data results from more elaborate numerical codes and the still continuously-increasing computational power available for their execution. The current need for efficient post-processing and sensible visualisation is thus apparent. StagLab (www.fabiocrameri.ch/software) provides such much-needed strongly-automated post-processing in combination with state-of-the-art visualisation. Written in MatLab, StagLab is simple, flexible, efficient and reliable. It produces figures and movies that are both fully-reproducible and publication-ready. StagLab's post-processing capabilities include numerous diagnostics for plate tectonics and mantle dynamics. Featured are accurate plate-boundary identification, slab-polarity recognition, plate-bending derivation, mantle-plume detection, and surface-topography component splitting. These and many other diagnostics are derived conveniently from only a few parameter fields thanks to powerful image processing tools and other capable algorithms. Additionally, StagLab aims to prevent scientific visualisation pitfalls that are, unfortunately, still too common in the Geodynamics community. Misinterpretation of raw data and exclusion of colourblind people introduced with the continuous use of the rainbow (a.k.a. jet) colour scheme is just one, but a dramatic example (e.g., Rogowitz and Treinish, 1998; Light and Bartlein, 2004; Borland and Ii, 2007). StagLab is currently optimised for binary StagYY output (e.g., Tackley 2008), but is adjustable for the potential use with other Geodynamic codes. Additionally, StagLab's post-processing routines are open-source. REFERENCES Borland, D., and R. M. T. Ii (2007), Rainbow color map (still) considered harmful, IEEE Computer Graphics and Applications, 27(2), 14-17. Light, A., and P. J. Bartlein (2004), The end of

A clinicomicrobiological study to evaluate the efficacy of manual and powered toothbrushes among autistic patients

PubMed Central

Vajawat, Mayuri; Deepika, P. C.; Kumar, Vijay; Rajeshwari, P.

2015-01-01

Aim: To compare the efficacy of powered toothbrushes in improving gingival health and reducing salivary red complex counts as compared to manual toothbrushes, among autistic individuals. Materials and Methods: Forty autistics was selected. Test group received powered toothbrushes, and control group received manual toothbrushes. Plaque index and gingival index were recorded. Unstimulated saliva was collected for analysis of red complex organisms using polymerase chain reaction. Results: A statistically significant reduction in the plaque scores was seen over a period of 12 weeks in both the groups (P < 0.001 for tests and P = 0.002 for controls). This reduction was statistically more significant in the test group (P = 0.024). A statistically significant reduction in the gingival scores was seen over a period of 12 weeks in both the groups (P < 0.001 for tests and P = 0.001 for controls). This reduction was statistically more significant in the test group (P = 0.042). No statistically significant reduction in the detection rate of red complex organisms were seen at 4 weeks in both the groups. Conclusion: Powered toothbrushes result in a significant overall improvement in gingival health when constant reinforcement of oral hygiene instructions is given. PMID:26681855

Texas highway operations manual

DOT National Transportation Integrated Search

1992-08-01

This document was developed for the Texas Department of Transportation to serve as a Department manual : addressing highway operations. The information in the manual covers a wide range of operational issues related tc : the planning, design, constru...

Asphalt pavement inspector's manual

DOT National Transportation Integrated Search

2002-07-01

The information currently available on asphalt paving would fill a small library. Furthermore, DOT&PF's Alaska Construction Manual describes procedures for the Department's staff to use on all aspects of construction projects. This manual draws on th...

Best practices procurement manual

DOT National Transportation Integrated Search

2002-08-01

This Manual provides recipients of Federal Transit Administration (FTA) funds suggestions on conducting third party procurements to assist them in meeting the standards of FTA Circular 4220.1D (the Circular). The Manual consists of suggested procedur...

Introduction to Hydraulics. Student's Manual.

ERIC Educational Resources Information Center

Texas Univ., Austin. Extension Instruction and Materials Center.

This manual on hydraulics is one of a series of individualized instructional materials for students. The manual is self-paced, but is designed to be used under the supervision of an instructor. The manual contains 10 assignments, each with all the information needed, a list of objectives that should be met, and exercise questions that can help in…

3D refractive index measurements of special optical fibers

NASA Astrophysics Data System (ADS)

Yan, Cheng; Huang, Su-Juan; Miao, Zhuang; Chang, Zheng; Zeng, Jun-Zhang; Wang, Ting-Yun

2016-09-01

A digital holographic microscopic chromatography-based approach with considerably improved accuracy, simplified configuration and performance stability is proposed to measure three dimensional refractive index of special optical fibers. Based on the approach, a measurement system is established incorporating a modified Mach-Zehnder interferometer and lab-developed supporting software for data processing. In the system, a phase projection distribution of an optical fiber is utilized to obtain an optimal digital hologram recorded by a CCD, and then an angular spectrum theory-based algorithm is adopted to extract the phase distribution information of an object wave. The rotation of the optic fiber enables the experimental measurements of multi-angle phase information. Based on the filtered back projection algorithm, a 3D refraction index of the optical fiber is thus obtained at high accuracy. To evaluate the proposed approach, both PANDA fibers and special elliptical optical fiber are considered in the system. The results measured in PANDA fibers agree well with those measured using S14 Refractive Index Profiler, which is, however, not suitable for measuring the property of a special elliptical fiber.

Outreach Science Education: Evidence-Based Studies in a Gene Technology Lab

ERIC Educational Resources Information Center

Scharfenberg, Franz-Josef; Bogner, Franz X.

2014-01-01

Nowadays, outreach labs are important informal learning environments in science education. After summarizing research to goals outreach labs focus on, we describe our evidence-based gene technology lab as a model of a research-driven outreach program. Evaluation-based optimizations of hands-on teaching based on cognitive load theory (additional…

Undergraduate Student Construction and Interpretation of Graphs in Physics Lab Activities

ERIC Educational Resources Information Center

Nixon, Ryan S.; Godfrey, T. J.; Mayhew, Nicholas T.; Wiegert, Craig C.

2016-01-01

Lab activities are an important element of an undergraduate physics course. In these lab activities, students construct and interpret graphs in order to connect the procedures of the lab with an understanding of the related physics concepts. This study investigated undergraduate students' construction and interpretation of graphs with best-fit…

Virtual Labs in proteomics: new E-learning tools.

PubMed

Ray, Sandipan; Koshy, Nicole Rachel; Reddy, Panga Jaipal; Srivastava, Sanjeeva

2012-05-17

Web-based educational resources have gained enormous popularity recently and are increasingly becoming a part of modern educational systems. Virtual Labs are E-learning platforms where learners can gain the experience of practical experimentation without any direct physical involvement on real bench work. They use computerized simulations, models, videos, animations and other instructional technologies to create interactive content. Proteomics being one of the most rapidly growing fields of the biological sciences is now an important part of college and university curriculums. Consequently, many E-learning programs have started incorporating the theoretical and practical aspects of different proteomic techniques as an element of their course work in the form of Video Lectures and Virtual Labs. To this end, recently we have developed a Virtual Proteomics Lab at the Indian Institute of Technology Bombay, which demonstrates different proteomics techniques, including basic and advanced gel and MS-based protein separation and identification techniques, bioinformatics tools and molecular docking methods, and their applications in different biological samples. This Tutorial will discuss the prominent Virtual Labs featuring proteomics content, including the Virtual Proteomics Lab of IIT-Bombay, and E-resources available for proteomics study that are striving to make proteomic techniques and concepts available and accessible to the student and research community. This Tutorial is part of the International Proteomics Tutorial Programme (IPTP 14). Details can be found at: http://www.proteomicstutorials.org/. Copyright © 2012 Elsevier B.V. All rights reserved.

Automated method to compute Evans index for diagnosis of idiopathic normal pressure hydrocephalus on brain CT images

NASA Astrophysics Data System (ADS)

Takahashi, Noriyuki; Kinoshita, Toshibumi; Ohmura, Tomomi; Matsuyama, Eri; Toyoshima, Hideto

2017-03-01

The early diagnosis of idiopathic normal pressure hydrocephalus (iNPH) considered as a treatable dementia is important. The iNPH causes enlargement of lateral ventricles (LVs). The degree of the enlargement of the LVs on CT or MR images is evaluated by using a diagnostic imaging criterion, Evans index. Evans index is defined as the ratio of the maximal width of frontal horns (FH) of the LVs to the maximal width of the inner skull (IS). Evans index is the most commonly used parameter for the evaluation of ventricular enlargement. However, manual measurement of Evans index is a time-consuming process. In this study, we present an automated method to compute Evans index on brain CT images. The algorithm of the method consisted of five major steps: standardization of CT data to an atlas, extraction of FH and IS regions, the search for the outmost points of bilateral FH regions, determination of the maximal widths of both the FH and the IS, and calculation of Evans index. The standardization to the atlas was performed by using linear affine transformation and non-linear wrapping techniques. The FH regions were segmented by using a three dimensional region growing technique. This scheme was applied to CT scans from 44 subjects, including 13 iNPH patients. The average difference in Evans index between the proposed method and manual measurement was 0.01 (1.6%), and the correlation coefficient of these data for the Evans index was 0.98. Therefore, this computerized method may have the potential to accurately compute Evans index for the diagnosis of iNPH on CT images.

Nutrient Control Design Manual

EPA Science Inventory

The Nutrient Control Design Manual will present an extensive state-of-the-technology review of the engineering design and operation of nitrogen and phosphorous control technologies and techniques applied at municipal wastewater treatment plants (WWTPs). This manual will present ...

WIM data analyst's manual

DOT National Transportation Integrated Search

2010-06-01

This manual provides information and recommended procedures to be utilized by an agencys Weigh-in-Motion (WIM) Office Data Analyst to perform validation and quality control (QC) checks of WIM traffic data. This manual focuses on data generated by ...

Serial Dilution Simulation Lab

ERIC Educational Resources Information Center

Keler, Cynthia; Balutis, Tabitha; Bergen, Kim; Laudenslager, Bryanna; Rubino, Deanna

2010-01-01

Serial dilution is often a difficult concept for students to understand. In this short dry lab exercise, students perform serial dilutions using seed beads. This exercise helps students gain skill at performing dilutions without using reagents, bacterial cultures, or viral cultures, while being able to visualize the process.

Problem Solvers: MathLab's Design Brings Professional Learning into the Classroom

ERIC Educational Resources Information Center

Morales, Sara; Sainz, Terri

2017-01-01

Imagine teachers, administrators, and university mathematicians and staff learning together in a lab setting where students are excited about attending a week-long summer math event because they are at the forefront of the experience. Piloted in three New Mexico classrooms during summer 2014, MathLab expanded into 17 lab settings over six…

LabLessons: Effects of Electronic Prelabs on Student Engagement and Performance

ERIC Educational Resources Information Center

Gryczka, Patrick; Klementowicz, Edward; Sharrock, Chappel; Maxfield, MacRae; Montclare, Jin Kim

2016-01-01

Lab instructors, for both high school and undergraduate college level courses, face issues of constricted time within the lab period and limited student engagement with prelab materials. To address these issues, an online prelab delivery system named LabLessons is developed and tested out in a high school chemistry classroom. The system…

Comparison of the methods for measuring the Ki-67 labeling index in adrenocortical carcinoma: manual versus digital image analysis.

PubMed

Yamazaki, Yuto; Nakamura, Yasuhiro; Shibahara, Yukiko; Konosu-Fukaya, Sachiko; Sato, Naomi; Kubota-Nakayama, Fumie; Oki, Yutaka; Baba, Satoshi; Midorikawa, Sanae; Morimoto, Ryo; Satoh, Fumitoshi; Sasano, Hironobu

2016-07-01

Adrenocortical carcinoma (ACC) is a rare, highly malignant neoplasm harboring marked histologic heterogeneity. The Ki-67 labeling index (LI) is one of the most effective diagnostic and prognostic markers in ACC. However, its assessment has by no means been standardized. Therefore, in this study, we analyzed the Ki-67 LI in 18 ACC cases both by seven pathologists using microscopes (MA; manual analysis) and with digital image analysis (DIA) and also compared the Ki-67 LI obtained by selecting "hot spots" and formulating the "average" reading of the whole tumor specimen. In addition, we performed statistical analysis of the association between Ki-67 LI and the clinical and pathologic features of individual cases. The DIA was significantly correlated with MA in hot spots but not in the average fields. The Ki-67 LI in hot spots was significantly and consistently higher than that in average areas by both MA and DIA, indicating intratumoral heterogeneity. The Ki-67 LI was significantly correlated with the Weiss criteria (eosinophilic cytoplasm, nuclear atypia, atypical mitoses, and sinusoidal invasion) by any mode of evaluation. The clinical outcome was significantly better in the patients with a Ki-67 < 10% than in those with a Ki-67 > 10% by MA in hot spots. The Ki-67 LI in hot spots measured by MA best reflected the clinical and pathologic features of ACC. Employment of DIA to obtain the Ki-67 LI in ACC requires further improvement, including correction of its overestimation of the value by counting non-tumorous cells and nuclear segmentation in areas of high cell density. Copyright © 2016 Elsevier Inc. All rights reserved.

Qualification Lab Testing on M1 Abrams Engine Oil Filters

DTIC Science & Technology

2016-11-01

UNCLASSIFIED QUALIFICATION LAB TESTING ON M1 ABRAMS ENGINE OIL FILTERS FINAL REPORT TFLRF No. 483 by Kristi K. Rutta U.S...the originator. UNCLASSIFIED QUALIFICATION LAB TESTING ON M1 ABRAMS ENGINE OIL FILTERS FINAL REPORT TFLRF No. 483 by Kristi K...TITLE AND SUBTITLE Qualification Lab Testing on M1 Abrams Engine Oil Filter 5a. CONTRACT NUMBER W56HZV-15-C-0030 5b. GRANT NUMBER 5c. PROGRAM

Video streaming technologies using ActiveX and LabVIEW

NASA Astrophysics Data System (ADS)

Panoiu, M.; Rat, C. L.; Panoiu, C.

2015-06-01

The goal of this paper is to present the possibilities of remote image processing through data exchange between two programming technologies: LabVIEW and ActiveX. ActiveX refers to the process of controlling one program from another via ActiveX component; where one program acts as the client and the other as the server. LabVIEW can be either client or server. Both programs (client and server) exist independent of each other but are able to share information. The client communicates with the ActiveX objects that the server opens to allow the sharing of information [7]. In the case of video streaming [1] [2], most ActiveX controls can only display the data, being incapable of transforming it into a data type that LabVIEW can process. This becomes problematic when the system is used for remote image processing. The LabVIEW environment itself provides little if any possibilities for video streaming, and the methods it does offer are usually not high performance, but it possesses high performance toolkits and modules specialized in image processing, making it ideal for processing the captured data. Therefore, we chose to use existing software, specialized in video streaming along with LabVIEW and to capture the data provided by them, for further use, within LabVIEW. The software we studied (the ActiveX controls of a series of media players that utilize streaming technology) provide high quality data and a very small transmission delay, ensuring the reliability of the results of the image processing.

ARS-Media for excel instruction manual

USDA-ARS?s Scientific Manuscript database

ARS-Media for Excel Instruction Manual is the instruction manual that explains how to use the Excel spreadsheet ARS-Media for Excel application. ARS-Media for Excel Instruction Manual is provided as a pdf file....

An Evaluation of Two Hands-On Lab Styles for Plant Biodiversity in Undergraduate Biology

ERIC Educational Resources Information Center

Basey, John M.; Maines, Anastasia P.; Francis, Clinton D.; Melbourne, Brett

2014-01-01

We compared learning cycle and expository formats for teaching about plant biodiversity in an inquiry-oriented university biology lab class (n = 465). Both formats had preparatory lab activities, a hands-on lab, and a postlab with reflection and argumentation. Learning was assessed with a lab report, a practical quiz in lab, and a multiple-choice…

A "Canned" Computer Lab

ERIC Educational Resources Information Center

Dowling, John, Jr.

1972-01-01

Discusses the use of a set of computer programs (FORTRAN IV) in an introductory mechanics course for science majors. One laboratory activity is described for determining the coefficient of restitution of a glider on an air track. A student evaluation for the lab is included in the appendix. (Author/TS)

Validity of Selected Lab and Field Tests of Physical Working Capacity.

ERIC Educational Resources Information Center

Burke, Edmund J.

The validity of selected lab and field tests of physical working capacity was investigated. Forty-four male college students were administered a series of lab and field tests of physical working capacity. Lab tests include a test of maximum oxygen uptake, the PWC 170 test, the Harvard Step Test, the Progressive Pulse Ratio Test, Margaria Test of…

Organizational Effectiveness Case Development Manual

DTIC Science & Technology

1980-10-01

Target audience Legal issues UAmographic information Sanctions Write-up format L eaching case Pay-off s The manual is a guide for developing...most efficient and effective way. The manual is divided into three main sections: (1) on the issues of client system sanction, confidentiality, and...CASE DEVELOPMENT MANUAL James Bedoian, Larry E. Greiner, Charles P. Schaefer, Warren H. Schmidt, Stanley R. Weingart System Development Corporation

Electronics lab instructors' approaches to troubleshooting instruction

NASA Astrophysics Data System (ADS)

Dounas-Frazer, Dimitri R.; Lewandowski, H. J.

2017-06-01

In this exploratory qualitative study, we describe instructors' self-reported practices for teaching and assessing students' ability to troubleshoot in electronics lab courses. We collected audio data from interviews with 20 electronics instructors from 18 institutions that varied by size, selectivity, and other factors. In addition to describing participants' instructional practices, we characterize their perceptions about the role of troubleshooting in electronics, the importance of the ability to troubleshoot more generally, and what it means for students to be competent troubleshooters. One major finding of this work is that, while almost all instructors in our study said that troubleshooting is an important learning outcome for students in electronics lab courses, only half of instructors said they directly assessed students' ability to troubleshoot. Based on our findings, we argue that there is a need for research-based instructional materials that attend to both cognitive and noncognitive aspects of troubleshooting proficiency. We also identify several areas for future investigation related to troubleshooting instruction in electronics lab courses.

Networking Labs in the Online Environment: Indicators for Success

ERIC Educational Resources Information Center

Lahoud, Hilmi A.; Krichen, Jack P.

2010-01-01

Several techniques have been used to provide hands-on educational experiences to online learners, including remote labs, simulation software, and virtual labs, which offer a more structured environment, including simulations and scheduled asynchronous access to physical resources. This exploratory study investigated how these methods can be used…

Vista and Pemex in LAB deal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, G.D.L.

1993-01-20

Vista Chemical (Houston) and Petroleos Mexicanos (Pemex; Mexico City) have firmed up their long-negotiated plans for Pemex to supply feedstock for a linear alkylbenzene (LAB) plant that Vista will build in Mexico (CW, Sept. 16, 1992 p. 8). Specifically, the two companies have signed an agreement of understanding to pursue negotiations and finalize agreements. The plant would cost $250 million, produce 260 million-330 million lbs/year of LAB, and create about 200 permanent jobs. Final agreements, including a site selection, are expected to be completed by midyear. Vista expects startup in 1996, and is considering forming aj oint venture with amore » Mexican partner.« less

The Influence of Tablet PCs on Students' Use of Multiple Representations in Lab Reports

NASA Astrophysics Data System (ADS)

Guelman, Clarisa Bercovich; De Leone, Charles; Price, Edward

2009-11-01

This study examined how different tools influenced students' use of representations in the Physics laboratory. In one section of a lab course, every student had a Tablet PC that served as a digital-ink based lab notebook. Students could seamlessly create hand-drawn graphics and equations, and write lab reports on the same computer used for data acquisition, simulation, and analysis. In another lab section, students used traditional printed lab guides, kept paper notebooks, and then wrote lab reports on regular laptops. Analysis of the lab reports showed differences between the sections' use of multiple representations, including an increased use of diagrams and equations by the Tablet users.

Interfacing LabVIEW With Instrumentation for Electronic Failure Analysis and Beyond

NASA Technical Reports Server (NTRS)

Buchanan, Randy K.; Bryan, Coleman; Ludwig, Larry

1996-01-01

The Laboratory Virtual Instrumentation Engineering Workstation (LabVIEW) software is designed such that equipment and processes related to control systems can be operationally lined and controlled by the use of a computer. Various processes within the failure analysis laboratories of NASA's Kennedy Space Center (KSC) demonstrate the need for modernization and, in some cases, automation, using LabVIEW. An examination of procedures and practices with the Failure Analaysis Laboratory resulted in the conclusion that some device was necessary to elevate the potential users of LabVIEW to an operational level in minimum time. This paper outlines the process involved in creating a tutorial application to enable personnel to apply LabVIEW to their specific projects. Suggestions for furthering the extent to which LabVIEW is used are provided in the areas of data acquisition and process control.

State of the Lab 2012

ScienceCinema

King, Alex

2018-05-07

Ames Laboratory Director Alex King delivers the annual State of the Lab address on Thursday, May 17, 2012, the 65th Anniversary of the founding of The Ames Laboratory. This video contains highlights from the address.

State of the Lab 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, Alex

2012-01-01

Ames Laboratory Director Alex King delivers the annual State of the Lab address on Thursday, May 17, 2012, the 65th Anniversary of the founding of The Ames Laboratory. This video contains highlights from the address.

Writing Better Lab Reports

ERIC Educational Resources Information Center

Porter, Rhiannon; Guarienti, Kristy; Brydon, Barbara; Robb, Jeanine; Royston, Ann; Painter, Heidi; Sutherland, Alex; Passmore, Cynthia; Smith, Martin H.

2010-01-01

As science teachers at a suburban California high school, the authors were concerned about the lab report conclusions written by their upper-level chemistry, biology, and ecology students--which were consistently of poor quality. Their work lacked inferences derived from data and support for their concluding statements. Working as part of a…

Science Labs: Beyond Isolationism

ERIC Educational Resources Information Center

Cavanagh, Sean

2007-01-01

A national study released in 2005 concluded that most high school students are not exposed to high quality science labs because of these reasons: (a) poor school facilities and organizations; (b) weak teacher preparation; (c) poor design; (d) cluttered state standards; (e) little representation on state tests; and (f) scarce evidence of what…

WetLab-2: Wet Lab RNA SmartCycler Providing PCR Capability on ISS

NASA Technical Reports Server (NTRS)

Parra, Macarena; Schonfeld, Julie

2015-01-01

The WetLab-2 system will provide sample preparation and qRT-PCR analysis on-board the ISS, a capability to enable using the ISS as a real laboratory. The system will be validated on SpX-7, and is planned for its first PI use on SpX-9.

Evaluation of French and English MeSH Indexing Systems with a Parallel Corpus

PubMed Central

Névéol, Aurélie; Mork, James G.; Aronson, Alan R.; Darmoni, Stefan J.

2005-01-01

Objective This paper presents the evaluation of two MeSH® indexing systems for French and English on a parallel corpus. Material and methods We describe two automatic MeSH indexing systems - MTI for English, and MAIF for French. The French version of the evaluation resources has been manually indexed with MeSH keyword/qualifier pairs. This professional indexing is used as our gold standard in the evaluation of both systems on keyword retrieval. Results The English system (MTI) obtains significantly better precision and recall (78% precision and 21% recall at rank 1, vs. 37%. precision and 6% recall for MAIF ). Moreover, the performance of both systems can be optimised by the breakage function used by the French system (MAIF), which selects an adaptive number of descriptors for each resource indexed. Conclusion MTI achieves better performance. However, both systems have features that can benefit each other. PMID:16779103

Characterization of Lactic Acid Bacteria (LAB) isolated from Indonesian shrimp paste (terasi)

NASA Astrophysics Data System (ADS)

Amalia, U.; Sumardianto; Agustini, T. W.

2018-02-01

Shrimp paste was one of fermented products, popular as a taste enhancer in many dishes. The processing of shrimp paste was natural fermentation, depends on shrimp it self and the presence of salt. The salt inhibits the growth of undesirable microorganism and allows the salt-tolerant lactic acid bacteria (LAB) to ferment the protein source to lactic acids. The objectives of this study were to characterize LAB isolated from Indonesian shrimp paste or "Terasi" with different times of fermentation (30, 60 and 90 days). Vitech analysis showed that there were four strains of the microorganism referred to as lactic acid bacteria (named: LABS1, LABS2, LABS3 and LABS4) with 95% sequence similarity. On the basis of biochemical, four isolates represented Lactobacillus, which the name Lactobacillus plantarum is proposed. L.plantarum was play role in resulting secondary metabolites, which gave umami flavor in shrimp paste.

Strategic Design of an Interactive Video Learning Lab (IVL).

ERIC Educational Resources Information Center

Switzer, Ralph V., Jr.; Switzer, Jamie S.

1993-01-01

Describes a study that researched elements necessary for the design of an interactive video learning (IVL) lab for business courses. Highlights include a review of pertinent literature; guidelines for the use of an IVL lab; IVL systems integration; system specifications; hardware costs; and system software. (five references) (LRW)

Learning Resources Evaluations Manual.

ERIC Educational Resources Information Center

Nunes, Evelyn H., Ed.

This manual contains evaluations of 196 instructional products listed in Virginia's Adult Basic Education Curricula Resource Catalog. It is intended as a convenient reference manual for making informed decisions concerning materials for adult learners in adult basic education, English-as-a-Second-Language instruction, and general educational…

GERTS GQ User's Manual.

ERIC Educational Resources Information Center

Akiba, Y.; And Others

This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

Manual for Refugee Sponsorship.

ERIC Educational Resources Information Center

Brewer, Kathleen; Taran, Patrick A.

This manual provides guidelines for religious congregations interested in setting up programs to sponsor refugees. The manual describes the psychological implications of the refugee experience and discusses initial steps in organizing for sponsorship. Detailed information is provided for sponsors regarding: finances and mobilization of resources;…

Innovative Use of a Classroom Response System During Physics Lab

NASA Astrophysics Data System (ADS)

Walgren, Jay

2011-01-01

More and more physics instructors are making use of personal/classroom response systems or "clickers." The use of clickers to engage students with multiple-choice questions during lecture and available instructor resources for clickers have been well documented in this journal.1-4 Newer-generation clickers, which I refer to as classroom response systems (CRS), have evolved to accept numeric answers (such as 9.81) instead of just single "multiple-choice" entries (Fig. 1). This advancement is available from most major clicker companies and allows for a greater variety of engaging questions during lecture. In addition, these new "numeric ready" clickers are marketed to be used for student assessments. During a test or quiz, students' answers are entered into their clicker instead of on paper or Scantron® and immediately absorbed by wireless connection into a computer for grading and analysis. I recognize the usefulness and benefit these new-generation CRSs provide for many instructors. However, I do not use my CRS in either of the aforementioned activities. Instead, I use it in an unconventional way. I use the CRS to electronically capture students' lab data as they are performing a physics lab (Fig. 2). I set up the clickers as if I were going to use them for a test, but instead of entering answers to a test, my students enter lab data as they collect it. In this paper I discuss my use of a classroom response system during physics laboratory and three benefits that result: 1) Students are encouraged to "take ownership of" and "have integrity with" their physics lab data. 2) Students' measuring and unit conversion deficiencies are identified immediately during the lab. 3) The process of grading students' labs is simplified because the results of each student's lab calculations can be pre-calculated for the instructor using a spreadsheet. My use of clickers during lab can be implemented with most clicker systems available to instructors today. The CRS I use is the e

First results on GlioLab/GlioSat Precursors Missions

NASA Astrophysics Data System (ADS)

Cappelletti, Chantal; Notarangelo, Angelo; Demoss, Darrin; Carella, Massimo

2012-07-01

Since 2009 GAUSS group is involved in a joint collaboration with Morehead State University (MSU) Space Science Center and IRCCS Casa Sollievo della Sofferenza (CSS) research labs with the aim to design a biomedical project in order to investigate if the combined effects of microgravity conditions and ionizing radiation increase or decrease the survival rate of cancer cells. The biological sample consists of Glioblastoma cancer cell line ANGM-CSS. Glioblastoma is a kind of cancer that can be treated after surgery only by radiotherapy using ionizing radiation. This treatment, anyway, results in a very low survival rate. This project uses different university space platforms: a CubeLab, named GlioLab, on board the International Space Station and the university microsatellite UniSat-5 designed by GAUSS. In addition a GlioLab/GlioSat precursor experiment has already flown two times with the Space Shuttle during the missions STS-134 and STS-135. The phase 0 or the precursor of GlioLab uses a COTS system, named Liquid Mixing Apparatus (LMA), to board the biological samples inside the Space Shuttle for thirty day . The LMA allows to board liquids inside a vial but is not equipped with environment control system. After landing the samples were investigated by researchers at CSS in Italy and at MSU in Kentucky. This paper deals with the experimental set up and the results obtained during the STS-134 and STS-135 missions and with the new evidences on the behavior of this kind of cancer. In particular the results obtained on the DNA analysis give a confirmation of the original idea of GLioLab/Gliosat project justifying the development of the two systems.

Mechanical versus manual chest compressions for cardiac arrest.

PubMed

Brooks, Steven C; Hassan, Nizar; Bigham, Blair L; Morrison, Laurie J

2014-02-27

This is the first update of the Cochrane review on mechanical chest compression devices published in 2011 (Brooks 2011). Mechanical chest compression devices have been proposed to improve the effectiveness of cardiopulmonary resuscitation (CPR). To assess the effectiveness of mechanical chest compressions versus standard manual chest compressions with respect to neurologically intact survival in patients who suffer cardiac arrest. We searched the Cochrane Central Register of Controlled Studies (CENTRAL; 2013, Issue 12), MEDLINE Ovid (1946 to 2013 January Week 1), EMBASE (1980 to 2013 January Week 2), Science Citation abstracts (1960 to 18 November 2009), Science Citation Index-Expanded (SCI-EXPANDED) (1970 to 11 January 2013) on Thomson Reuters Web of Science, biotechnology and bioengineering abstracts (1982 to 18 November 2009), conference proceedings Citation Index-Science (CPCI-S) (1990 to 11 January 2013) and clinicaltrials.gov (2 August 2013). We applied no language restrictions. Experts in the field of mechanical chest compression devices and manufacturers were contacted. We included randomised controlled trials (RCTs), cluster RCTs and quasi-randomised studies comparing mechanical chest compressions versus manual chest compressions during CPR for patients with atraumatic cardiac arrest. Two review authors abstracted data independently; disagreement between review authors was resolved by consensus and by a third review author if consensus could not be reached. The methodologies of selected studies were evaluated by a single author for risk of bias. The primary outcome was survival to hospital discharge with good neurological outcome. We planned to use RevMan 5 (Version 5.2. The Nordic Cochrane Centre) and the DerSimonian & Laird method (random-effects model) to provide a pooled estimate for risk ratio (RR) with 95% confidence intervals (95% CIs), if data allowed. Two new studies were included in this update. Six trials in total, including data from 1166

EUSO@TurLab: An experimental replica of ISS orbits

NASA Astrophysics Data System (ADS)

Bertaina, M.; Bowaire, A.; Cambursano, S.; Caruso, R.; Contino, G.; Cotto, G.; Crivello, F.; Forza, R.; Guardone, N.; Manfrin, M.; Mignone, M.; Mulas, R.; Suino, G.; Tibaldi, P. S.

2015-03-01

The EUSO@TurLab project is an on-going activity aimed to reproduce atmospheric and luminous conditions that JEM-EUSO will encounter on its orbits around the Earth. The use of the TurLab facility, part of the Department of Physics of the University of Torino, allows the simulation of different surface conditions in a very dark and rotating environment in order to test the response of JEM-EUSO's sensors and sensitivity. The experimental setup currently in operation has been used to check the potential of the TurLab facility for the above purposes, and the acquired data will be used to test the concept of JEM-EUSO's trigger system.

An update on Lab Rover: A hospital material transporter

NASA Technical Reports Server (NTRS)

Mattaboni, Paul

1994-01-01

The development of a hospital material transporter, 'Lab Rover', is described. Conventional material transport now utilizes people power, push carts, pneumatic tubes and tracked vehicles. Hospitals are faced with enormous pressure to reduce operating costs. Cyberotics, Inc. developed an Autonomous Intelligent Vehicle (AIV). This battery operated service robot was designed specifically for health care institutions. Applications for the AIV include distribution of clinical lab samples, pharmacy drugs, administrative records, x-ray distribution, meal tray delivery, and certain emergency room applications. The first AIV was installed at Lahey Clinic in Burlington, Mass. Lab Rover was beta tested for one year and has been 'on line' for an additional 2 years.

Hooked on Inquiry: History Labs in the Methods Course

ERIC Educational Resources Information Center

Wood, Linda Sargent

2012-01-01

Methods courses provide a rich opportunity to unpack what it means to "learn history by doing history." To help explain what "doing history" means, the author has created history labs to walk teacher candidates through the historical process. Each lab poses a historical problem, requires analysis of primary and secondary…

LabPatch, an acquisition and analysis program for patch-clamp electrophysiology.

PubMed

Robinson, T; Thomsen, L; Huizinga, J D

2000-05-01

An acquisition and analysis program, "LabPatch," has been developed for use in patch-clamp research. LabPatch controls any patch-clamp amplifier, acquires and records data, runs voltage protocols, plots and analyzes data, and connects to spreadsheet and database programs. Controls within LabPatch are grouped by function on one screen, much like an oscilloscope front panel. The software is mouse driven, so that the user need only point and click. Finally, the ability to copy data to other programs running in Windows 95/98, and the ability to keep track of experiments using a database, make LabPatch extremely versatile. The system requirements include Windows 95/98, at least a 100-MHz processor and 16 MB RAM, a data acquisition card, digital-to-analog converter, and a patch-clamp amplifier. LabPatch is available free of charge at http://www.fhs.mcmaster.ca/huizinga/.

14 CFR 121.141 - Airplane flight manual.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Airplane flight manual. 121.141 Section 121... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Manual Requirements § 121.141 Airplane flight manual. (a) Each certificate holder shall keep a current approved airplane flight manual for each type of...

14 CFR 121.141 - Airplane flight manual.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Airplane flight manual. 121.141 Section 121... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Manual Requirements § 121.141 Airplane flight manual. (a) Each certificate holder shall keep a current approved airplane flight manual for each type of...

14 CFR 121.141 - Airplane flight manual.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Airplane flight manual. 121.141 Section 121... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Manual Requirements § 121.141 Airplane flight manual. (a) Each certificate holder shall keep a current approved airplane flight manual for each type of...

14 CFR 121.141 - Airplane flight manual.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Airplane flight manual. 121.141 Section 121... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Manual Requirements § 121.141 Airplane flight manual. (a) Each certificate holder shall keep a current approved airplane flight manual for each type of...

14 CFR 121.141 - Airplane flight manual.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Airplane flight manual. 121.141 Section 121... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Manual Requirements § 121.141 Airplane flight manual. (a) Each certificate holder shall keep a current approved airplane flight manual for each type of...

Dental Charting. Student's Manual.

ERIC Educational Resources Information Center

Weaver, Trudy Karlene; Apfel, Maura

This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: dental anatomical terminology; tooth numbering systems;…

[The normalized smoothness index and parametric population RDH index of losartan in patients with newly diagnosed hypertension and metabolic syndrome].

PubMed

Rihácek, I; Frána, P; Schwarz, D; Plachý, M; Soucek, M

2010-09-01

Ambulatory blood pressure monitoring provides an opportunity to evaluate 24-hour efficacy of once daily preparations. To evaluate 24-hour efficacy of losartan in patients with newly diagnosed hypertension and metabolic syndrome using the parametric population RDH index and normalized smoothness index. Twenty seven patients with newly diagnosed hypertension and with metabolic syndrome, sufficiently responding to blood pressure therapy with losartan, assessed using sphygmomanometer. 18 men, 9 women, mean age of 48 years, body mass index of 32.6 kg.m(-2), before and after 1 year of therapy with losartan in the mean dose of 69 mg once a day. Blood pressure measured with sphygmomanometer and 24-hour ambulatory monitoring (SpaceLabs 90207) according to the European Society of Hypertension criteria. Hypertension was defined as sphygmomanometer-measured blood pressure values of more than or equal to 130 and/or 85 mm Hg. Fulfilment of at least 3 criteria of metabolic syndrome according to the definition by The Adult Treatment Panel III. The population normalized smoothness index of losartan (+/- standard error of the mean) was 1.10 +/- 0.13 for systolic pressure, 0.81 +/- 0.11 for diastolic pressure and 1.00 +/- 0.14 for mean arterial blood pressure. The parametric population RDH index of 24, 24, 0 for systolic pressure and 24, 24, 0 for diastolic pressure. Losartan at a mean dose of 69 mg once daily showed an adequate 24-hour efficacy in patients with newly diagnosed hypertension and metabolic syndrome responding to treatment when blood pressure was measured using sphygmomanometer and the effect expressed as the parametric population RDH index for systolic as well as diastolic pressure and when evaluating normalized smoothness index based on systolic blood pressure value and mean arterial pressure.

Conducting On-orbit Gene Expression Analysis on ISS: WetLab-2

NASA Technical Reports Server (NTRS)

Parra, Macarena; Almeida, Eduardo; Boone, Travis; Jung, Jimmy; Lera, Matthew P.; Ricco, Antonio; Souza, Kenneth; Wu, Diana; Richey, C. Scott

2013-01-01

WetLab-2 will enable expanded genomic research on orbit by developing tools that support in situ sample collection, processing, and analysis on ISS. This capability will reduce the time-to-results for investigators and define new pathways for discovery on the ISS National Lab. The primary objective is to develop a research platform on ISS that will facilitate real-time quantitative gene expression analysis of biological samples collected on orbit. WetLab-2 will be capable of processing multiple sample types ranging from microbial cultures to animal tissues dissected on orbit. WetLab-2 will significantly expand the analytical capabilities onboard ISS and enhance science return from ISS.

A detailed dosimetric comparison between manual and inverse plans in HDR intracavitary/interstitial cervical cancer brachytherapy.

PubMed

Trnková, Petra; Baltas, Dimos; Karabis, Andreas; Stock, Markus; Dimopoulos, Johannes; Georg, Dietmar; Pötter, Richard; Kirisits, Christian

2010-12-01

The purpose of this study was to compare two inverse planning algorithms for cervical cancer brachytherapy and a conventional manual treatment planning according to the MUW (Medical University of Vienna) protocol. For 20 patients, manually optimized, and, inversely optimized treatment plans with Hybrid Inverse treatment Planning and Optimization (HIPO) and with Inverse Planning Simulated Annealing (IPSA) were created. Dosimetric parameters, absolute volumes of normal tissue receiving reference doses, absolute loading times of tandem, ring and interstitial needles, Paddick and COIN conformity indices were evaluated. HIPO was able to achieve a similar dose distribution to manual planning with the restriction of high dose regions. It reduced the loading time of needles and the overall treatment time. The values of both conformity indices were the lowest. IPSA was able to achieve acceptable dosimetric results. However, it overloaded the needles. This resulted in high dose regions located in the normal tissue. The Paddick index for the volume of two times prescribed dose was outstandingly low. HIPO can produce clinically acceptable treatment plans with the elimination of high dose regions in normal tissue. Compared to IPSA, it is an inverse optimization method which takes into account current clinical experience gained from manual treatment planning.

A detailed dosimetric comparison between manual and inverse plans in HDR intracavitary/interstitial cervical cancer brachytherapy

PubMed Central

Baltas, Dimos; Karabis, Andreas; Stock, Markus; Dimopoulos, Johannes; Georg, Dietmar; Pötter, Richard; Kirisits, Christian

2011-01-01

Purpose The purpose of this study was to compare two inverse planning algorithms for cervical cancer brachytherapy and a conventional manual treatment planning according to the MUW (Medical University of Vienna) protocol. Material and methods For 20 patients, manually optimized, and, inversely optimized treatment plans with Hybrid Inverse treatment Planning and Optimization (HIPO) and with Inverse Planning Simulated Annealing (IPSA) were created. Dosimetric parameters, absolute volumes of normal tissue receiving reference doses, absolute loading times of tandem, ring and interstitial needles, Paddick and COIN conformity indices were evaluated. Results HIPO was able to achieve a similar dose distribution to manual planning with the restriction of high dose regions. It reduced the loading time of needles and the overall treatment time. The values of both conformity indices were the lowest. IPSA was able to achieve acceptable dosimetric results. However, it overloaded the needles. This resulted in high dose regions located in the normal tissue. The Paddick index for the volume of two times prescribed dose was outstandingly low. Conclusions HIPO can produce clinically acceptable treatment plans with the elimination of high dose regions in normal tissue. Compared to IPSA, it is an inverse optimization method which takes into account current clinical experience gained from manual treatment planning. PMID:27853479

Tracker-assisted versus manual ablation zone centration in laser in situ keratomileusis for myopia and astigmatism.

PubMed

Pineros, Oscar E

2002-01-01

Eye tracker systems have been developed concomitantly with small scanning beams to theoretically reduce ablation zone decentration and for accurate registration of all the laser pulses on the cornea. The purpose of the study was to compare the tracker-assisted with the manual centration method. Twenty-five patients (48 eyes) with myopia and/or astigmatism had laser in situ keratomileusis (LASIK) between August 1998 and February 1999 with the Technolas 117C laser. Twenty patients (38 eyes, 80%) were available for follow-up at 3 months after surgery. Eyes were assigned randomly to one of two ablation zone centration methods: Group 1: Tracker-assisted (20 eyes), Group 2: Manual (18 eyes). Mean distance between the ablation zone center and the pupillary center in the tracker-assisted centration group was 0.55 +/- 0.30 mm (range, 0.10 to 1.4 mm), and in the manual centration group, 0.43 +/- 0.23 mm (range, 0.10 to 1.0 mm) (P = .177). There was no statistically significant difference in postoperative contrast sensitivity, glare, and Topographical Corneal Surface Regularity Index (SRI) between the two groups. We obtained good results with both centration methods. We did not find superiority of the tracker-assisted over manual regarding ablation zone centration, vision quality, or regularity of the ablation.

MeSH Now: automatic MeSH indexing at PubMed scale via learning to rank.

PubMed

Mao, Yuqing; Lu, Zhiyong

2017-04-17

MeSH indexing is the task of assigning relevant MeSH terms based on a manual reading of scholarly publications by human indexers. The task is highly important for improving literature retrieval and many other scientific investigations in biomedical research. Unfortunately, given its manual nature, the process of MeSH indexing is both time-consuming (new articles are not immediately indexed until 2 or 3 months later) and costly (approximately ten dollars per article). In response, automatic indexing by computers has been previously proposed and attempted but remains challenging. In order to advance the state of the art in automatic MeSH indexing, a community-wide shared task called BioASQ was recently organized. We propose MeSH Now, an integrated approach that first uses multiple strategies to generate a combined list of candidate MeSH terms for a target article. Through a novel learning-to-rank framework, MeSH Now then ranks the list of candidate terms based on their relevance to the target article. Finally, MeSH Now selects the highest-ranked MeSH terms via a post-processing module. We assessed MeSH Now on two separate benchmarking datasets using traditional precision, recall and F 1 -score metrics. In both evaluations, MeSH Now consistently achieved over 0.60 in F-score, ranging from 0.610 to 0.612. Furthermore, additional experiments show that MeSH Now can be optimized by parallel computing in order to process MEDLINE documents on a large scale. We conclude that MeSH Now is a robust approach with state-of-the-art performance for automatic MeSH indexing and that MeSH Now is capable of processing PubMed scale documents within a reasonable time frame. http://www.ncbi.nlm.nih.gov/CBBresearch/Lu/Demo/MeSHNow/ .

LabVIEW-based control software for para-hydrogen induced polarization instrumentation.

PubMed

Agraz, Jose; Grunfeld, Alexander; Li, Debiao; Cunningham, Karl; Willey, Cindy; Pozos, Robert; Wagner, Shawn

2014-04-01

The elucidation of cell metabolic mechanisms is the modern underpinning of the diagnosis, treatment, and in some cases the prevention of disease. Para-Hydrogen induced polarization (PHIP) enhances magnetic resonance imaging (MRI) signals over 10,000 fold, allowing for the MRI of cell metabolic mechanisms. This signal enhancement is the result of hyperpolarizing endogenous substances used as contrast agents during imaging. PHIP instrumentation hyperpolarizes Carbon-13 ((13)C) based substances using a process requiring control of a number of factors: chemical reaction timing, gas flow, monitoring of a static magnetic field (Bo), radio frequency (RF) irradiation timing, reaction temperature, and gas pressures. Current PHIP instruments manually control the hyperpolarization process resulting in the lack of the precise control of factors listed above, resulting in non-reproducible results. We discuss the design and implementation of a LabVIEW based computer program that automatically and precisely controls the delivery and manipulation of gases and samples, monitoring gas pressures, environmental temperature, and RF sample irradiation. We show that the automated control over the hyperpolarization process results in the hyperpolarization of hydroxyethylpropionate. The implementation of this software provides the fast prototyping of PHIP instrumentation for the evaluation of a myriad of (13)C based endogenous contrast agents used in molecular imaging.

14 CFR 125.75 - Airplane flight manual.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Airplane flight manual. 125.75 Section 125... Airplane flight manual. (a) Each certificate holder shall keep a current approved Airplane Flight Manual or... approved Airplane Flight Manual or the approved equivalent aboard each airplane it operates. A certificate...

14 CFR 125.75 - Airplane flight manual.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Airplane flight manual. 125.75 Section 125... Airplane flight manual. (a) Each certificate holder shall keep a current approved Airplane Flight Manual or... approved Airplane Flight Manual or the approved equivalent aboard each airplane it operates. A certificate...

14 CFR 125.75 - Airplane flight manual.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Airplane flight manual. 125.75 Section 125... Airplane flight manual. (a) Each certificate holder shall keep a current approved Airplane Flight Manual or... approved Airplane Flight Manual or the approved equivalent aboard each airplane it operates. A certificate...

The NASTRAN theoretical manual (level 16.0)

NASA Technical Reports Server (NTRS)

1976-01-01

The manual is a commentary on the NASTRAN computer program, introducing the program to all interested persons. The manual's most important function is to present the developments of the analytical and numerical procedures that underlie the program. This manual is one of the four manuals which document the NASTRAN computer program.

16 CFR 1211.14 - Instruction manual.

Code of Federal Regulations, 2010 CFR

2010-01-01

... instruction manual shall give complete instructions for the installation, operation, and user maintenance of... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Instruction manual. 1211.14 Section 1211.14... STANDARD FOR AUTOMATIC RESIDENTIAL GARAGE DOOR OPERATORS The Standard § 1211.14 Instruction manual. (a...

Materials inventory management manual

NASA Technical Reports Server (NTRS)

1992-01-01

This NASA Materials Inventory Management Manual (NHB 4100.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958 (42 USC 2473). It sets forth policy, performance standards, and procedures governing the acquisition, management and use of materials. This Manual is effective upon receipt.

School District Energy Manual.

ERIC Educational Resources Information Center

Association of School Business Officials International, Reston, VA.

This manual serves as an energy conservation reference and management guide for school districts. The School District Energy Program (SDEP) is designed to provide information and/or assistance to school administrators planning to implement a comprehensive energy management program. The manual consists of 15 parts. Part 1 describes the SDEP; Parts…

A Computer Lab that Students Use but Never See

ERIC Educational Resources Information Center

Young, Jeffrey R.

2008-01-01

North Carolina State University may never build another computer lab. Instead the university has installed racks of equipment in windowless rooms where students and professors never go. This article describes a project called the Virtual Computing Lab. Users enter it remotely from their own computers in dormitory rooms or libraries. They get all…

Pantheon 1.0, a manually verified dataset of globally famous biographies.

PubMed

Yu, Amy Zhao; Ronen, Shahar; Hu, Kevin; Lu, Tiffany; Hidalgo, César A

2016-01-05

We present the Pantheon 1.0 dataset: a manually verified dataset of individuals that have transcended linguistic, temporal, and geographic boundaries. The Pantheon 1.0 dataset includes the 11,341 biographies present in more than 25 languages in Wikipedia and is enriched with: (i) manually verified demographic information (place and date of birth, gender) (ii) a taxonomy of occupations classifying each biography at three levels of aggregation and (iii) two measures of global popularity including the number of languages in which a biography is present in Wikipedia (L), and the Historical Popularity Index (HPI) a metric that combines information on L, time since birth, and page-views (2008-2013). We compare the Pantheon 1.0 dataset to data from the 2003 book, Human Accomplishments, and also to external measures of accomplishment in individual games and sports: Tennis, Swimming, Car Racing, and Chess. In all of these cases we find that measures of popularity (L and HPI) correlate highly with individual accomplishment, suggesting that measures of global popularity proxy the historical impact of individuals.

Pantheon 1.0, a manually verified dataset of globally famous biographies

PubMed Central

Yu, Amy Zhao; Ronen, Shahar; Hu, Kevin; Lu, Tiffany; Hidalgo, César A.

2016-01-01

We present the Pantheon 1.0 dataset: a manually verified dataset of individuals that have transcended linguistic, temporal, and geographic boundaries. The Pantheon 1.0 dataset includes the 11,341 biographies present in more than 25 languages in Wikipedia and is enriched with: (i) manually verified demographic information (place and date of birth, gender) (ii) a taxonomy of occupations classifying each biography at three levels of aggregation and (iii) two measures of global popularity including the number of languages in which a biography is present in Wikipedia (L), and the Historical Popularity Index (HPI) a metric that combines information on L, time since birth, and page-views (2008–2013). We compare the Pantheon 1.0 dataset to data from the 2003 book, Human Accomplishments, and also to external measures of accomplishment in individual games and sports: Tennis, Swimming, Car Racing, and Chess. In all of these cases we find that measures of popularity (L and HPI) correlate highly with individual accomplishment, suggesting that measures of global popularity proxy the historical impact of individuals. PMID:26731133

The community FabLab platform: applications and implications in biomedical engineering.

PubMed

Stephenson, Makeda K; Dow, Douglas E

2014-01-01

Skill development in science, technology, engineering and math (STEM) education present one of the most formidable challenges of modern society. The Community FabLab platform presents a viable solution. Each FabLab contains a suite of modern computer numerical control (CNC) equipment, electronics and computing hardware and design, programming, computer aided design (CAD) and computer aided machining (CAM) software. FabLabs are community and educational resources and open to the public. Development of STEM based workforce skills such as digital fabrication and advanced manufacturing can be enhanced using this platform. Particularly notable is the potential of the FabLab platform in STEM education. The active learning environment engages and supports a diversity of learners, while the iterative learning that is supported by the FabLab rapid prototyping platform facilitates depth of understanding, creativity, innovation and mastery. The product and project based learning that occurs in FabLabs develops in the student a personal sense of accomplishment, self-awareness, command of the material and technology. This helps build the interest and confidence necessary to excel in STEM and throughout life. Finally the introduction and use of relevant technologies at every stage of the education process ensures technical familiarity and a broad knowledge base needed for work in STEM based fields. Biomedical engineering education strives to cultivate broad technical adeptness, creativity, interdisciplinary thought, and an ability to form deep conceptual understanding of complex systems. The FabLab platform is well designed to enhance biomedical engineering education.

46 CFR 160.176-21 - User manuals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false User manuals. 160.176-21 Section 160.176-21 Shipping...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-21 User manuals. (a) The manufacturer must develop a user's manual for each model of inflatable lifejacket. The content of the manual...

A Simple, Successful Capacitor Lab

ERIC Educational Resources Information Center

Ennis, William

2011-01-01

Capacitors are a fundamental component of modern electronics. They appear in myriad devices and in an enormous range of sizes. Although our students are taught the function and analysis of capacitors, few have the opportunity to use them in our labs.

Swanson in the US Lab

NASA Image and Video Library

2014-04-18

ISS039-E-013158 (18 April 2014) --- In the U.S. lab Destiny on the Earth-orbiting International Space Station, Expedition 39 Flight Engineer Steve Swanson of NASA works on WRS condensate pumping, using the high flow water transfer pump.

Introduction to Social Psychology: Administrative Manual [And] Student Manual [And] Unit Study Guide.

ERIC Educational Resources Information Center

Rankin, Robert E.

This learning package is a three-semester-hour, independent-study course in social psychology designed for postsecondary, external degree students. Keyed to the commercially published textbook "Social Psychology: Explorations in Understanding" (Del Mar, CA: CRM, 1974), the package consists of an administrator manual, a student manual, and a…

21 CFR 882.4840 - Manual rongeur.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Manual rongeur. 882.4840 Section 882.4840 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4840 Manual rongeur. (a) Identification. A manual...

21 CFR 882.4840 - Manual rongeur.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Manual rongeur. 882.4840 Section 882.4840 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4840 Manual rongeur. (a) Identification. A manual...

Technical Manual: 2002 Series GED Tests

ERIC Educational Resources Information Center

Ezzelle, Carol; Setzer, J. Carl

2009-01-01

This manual was written to provide technical information regarding the 2002 Series GED (General Educational Development) Tests. Throughout this manual, documentation is provided regarding the development of the GED Tests, data collection activities, as well as reliability and validity evidence. The purpose of this manual is to provide evidence…

Near Space Lab-Rat Experimentation using Stratospheric Balloon

NASA Astrophysics Data System (ADS)

Buduru, Suneel Kumar; Reddy Vizapur, Anmi; Rao Tanneeru, Venkateswara; Trivedi, Dharmesh; Devarajan, Anand; Pandit Manikrao Kulkarni, MR..; Ojha, Devendra; Korra, Sakram; Neerudu, Nagendra; Seng, Lim; Godi, Stalin Peter

2016-07-01

First ever balloon borne lab-rat experiment up to near space stratospheric altitude levels carried out at TIFR Balloon Facility, Hydeabad using zero pressure balloons for the purpose of validating the life support system. A series of two balloon experiments conducted under joint collaboration with IN.Genius, Singapore in the year 2015. In these experiments, three lab-rats sent to stratosphere in a pressurized capsule designed to reach an altitude of 30 km by keeping constant pressure, temperature and maintained at a precise rate of oxygen supply inside the capsule. The first experiment conducted on 1 ^{st} February, 2015 with a total suspended weight of 225 kg. During the balloon ascent stage at 18 km altitude, sensors inside the capsule reported drastic drop in internal pressure while oxygen and temperatures maintained at correct levels resulted in premature fligt termination at 20.1 km. All the three lab-rats recovered without life due to the collapse of their lungs caused by the depressurization inside the capsule. The second experiment conducted on 14th March, 2015 using a newly developed capsule with rectification of depressurization fault by using improved sealing gaskets and hermitically sealed connectors for sending lab-rats again to stratosphere comprising a total suspended load of 122.3 kg. The balloon flight was terminated after reaching 29.5 km in 110 minutes and succesfully recovered all the three lab-rats alive. This paper focuses on lessons learnt of the development of the life support system as an integral pressurized vessel, flight control instrumentation, flight simulation tests using thermo-vaccum chamber with pre-flight operations.

Thermal spray manual for machinery components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Travis, R.; Ginther, C.; Herbstritt, M.

1995-12-31

The Thermal Spray Manual For Machinery Components is a National Shipbuilding Research (SP-7) Project. This Manual is being developed by Puget Sound Naval Shipyard with the help of other government thermal spray facilities and SP-7 panel members. The purpose of the manual is to provide marine repair facilities with a ``how to do`` document that will be ``user friendly`` and known to be technically sound through production experience. The manual`s intent is to give marine repair facilities the ability to maximize the thermal spray process as a repair method for machinery components and to give these facilities guidelines on howmore » to become qualified to receive certification that they meet the requirements of Military Standard 1687A.« less

Integration of MSFC Usability Lab with Usability Testing

NASA Technical Reports Server (NTRS)

Cheng, Yiwei; Richardson, Sally

2010-01-01

As part of the Stage Analysis Branch, human factors engineering plays an important role in relating humans to the systems of hardware and structure designs of the new launch vehicle. While many branches are involved in the technical aspects of creating a launch vehicle, human factors connects humans to the scientific systems with the goal of improving operational performance and safety while reducing operational error and damage to the hardware. Human factors engineers use physical and computerized models to visualize possible areas for improvements to ensure human accessibility to components requiring maintenance and that the necessary maintenance activities can be accomplished with minimal risks to human and hardware. Many methods of testing are used to fulfill this goal, such as physical mockups, computerized visualization, and usability testing. In this analysis, a usability test is conducted to test how usable a website is to users who are and are not familiar with it. The testing is performed using participants and Morae software to record and analyze the results. This analysis will be a preliminary test of the usability lab in preparation for use in new spacecraft programs, NASA Enterprise, or other NASA websites. The usability lab project is divided into two parts: integration of the usability lab and a preliminary test of the usability lab.

Are Drivers' Manuals Right for Reluctant Readers?

ERIC Educational Resources Information Center

Stahl, Norman A.; And Others

Readability formulas were applied to the drivers' manuals of each of the 50 United States and Puerto Rico to determine whether the manuals were appropriate materials for motivating reluctant or low achieving adolescent readers. Four 100-word samples were chosen from each manual, according to four themes common to each manual and of particular…

46 CFR 160.077-29 - PFD Manuals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... limitation must have a user's manual that— (i) Explains in detail the proper care, maintenance, stowage, and... 46 Shipping 6 2010-10-01 2010-10-01 false PFD Manuals. 160.077-29 Section 160.077-29 Shipping... Manuals. (a) Approval. The text of each manual required by this section is reviewed with the application...

Developing Guided Inquiry-Based Student Lab Worksheet for Laboratory Knowledge Course

NASA Astrophysics Data System (ADS)

Rahmi, Y. L.; Novriyanti, E.; Ardi, A.; Rifandi, R.

2018-04-01

The course of laboratory knowledge is an introductory course for biology students to follow various lectures practicing in the biology laboratory. Learning activities of laboratory knowledge course at this time in the Biology Department, Universitas Negeri Padang has not been completed by supporting learning media such as student lab worksheet. Guided inquiry learning model is one of the learning models that can be integrated into laboratory activity. The study aimed to produce student lab worksheet based on guided inquiry for laboratory knowledge course and to determine the validity of lab worksheet. The research was conducted using research and developmet (R&D) model. The instruments used in data collection in this research were questionnaire for student needed analysis and questionnaire to measure the student lab worksheet validity. The data obtained was quantitative from several validators. The validators consist of three lecturers. The percentage of a student lab worksheet validity was 94.18 which can be categorized was very good.

Attack of the Killer Fungus: A Hypothesis-Driven Lab Module †

PubMed Central

Sato, Brian K.

2013-01-01

Discovery-driven experiments in undergraduate laboratory courses have been shown to increase student learning and critical thinking abilities. To this end, a lab module involving worm capture by a nematophagous fungus was developed. The goals of this module are to enhance scientific understanding of the regulation of worm capture by soil-dwelling fungi and for students to attain a set of established learning goals, including the ability to develop a testable hypothesis and search for primary literature for data analysis, among others. Students in a ten-week majors lab course completed the lab module and generated novel data as well as data that agrees with the published literature. In addition, learning gains were achieved as seen through a pre-module and post-module test, student self-assessment, class exam, and lab report. Overall, this lab module enables students to become active participants in the scientific method while contributing to the understanding of an ecologically relevant model organism. PMID:24358387

School Fire Safety Manual.

ERIC Educational Resources Information Center

Arkansas State Dept. of Education, Little Rock. General Education Div.

This manual provides the background information necessary for the planning of school fire safety programs by local school officials, particularly in Arkansas. The manual first discusses the need for such programs and cites the Arkansas state law regarding them. Policies established by the Arkansas State Board of Education to implement the legal…

Citizenship Rights Training Manual.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Human Services, Oklahoma City. Developmental Disabilities Services Div.

The goal of this training manual is to encourage citizenship training for individuals with developmental disabilities when such training is indicated. It is intended to be used by interdisciplinary teams and trainers throughout the service delivery system. The manual begins by outlining a philosophy of service delivery, listing some of the basic…

Technical Manual. The ACT®

ERIC Educational Resources Information Center

ACT, Inc., 2014

2014-01-01

This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

Education. Louisiana MSRTS Manual. Bulletin 1712.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Bureau of Migrant Education.

Written for Migrant Student Records Transfer System (MSRTS) specialists, this manual provides information to help them generate, translate, interpret, use, and update a migrant child's educational record. The manual serves as a reference to be used in conjunction with the National MSRTS User's Manual and as initial orientation and subsequent guide…

Developing the Rehabilitation Facility Personnel Manual.

ERIC Educational Resources Information Center

Gilbertson, Alan D.

This guide is intended to provide rehabilitation facilities with assistance in developing or improving their facility personnel manual, along with examples of what some rehabilitation facilities are including within their personnel manuals. The introduction to the guide discusses how a facility can begin the formulation of its personnel manual.…

Advanced teaching labs in physics - celebrating progress; challenges ahead

NASA Astrophysics Data System (ADS)

Peterson, Richard

A few examples of optical physics experiments may help us first reflect on significant progress on how advanced lab initiatives may now be more effectively developed, discussed, and disseminated - as opposed to only 10 or 15 years back. Many cooperative developments of the last decade are having profound impacts on advanced lab workers and students. Central to these changes are the programs of the Advanced Laboratory Physics Association (ALPhA) (Immersions, BFY conferences), AAPT (advlab-l server, ComPADRE, apparatus competitions, summer workshops/sessions), APS (Reichert Award, FEd activities and sessions), and the Jonathan F. Reichert Foundation (ALPhA support and institution matched equipment grants for Immersion participants). Broad NSF support has helped undergird several of these initiatives. Two of the most significant challenges before this new advanced lab community are (a) to somehow enhance funding opportunities for teaching equipment and apparatus in an era of minimal NSF equipment support, and (b) to help develop a more complementary relationship between research-based advanced lab pedagogies and the development of fresh physics experiments that help enable the mentoring and experimental challenge of our students.

Changes in co-contraction during stair descent after manual therapy protocol in knee osteoarthritis: A pilot, single-blind, randomized study.

PubMed

Cruz-Montecinos, Carlos; Flores-Cartes, Rodrigo; Montt-Rodriguez, Agustín; Pozo, Esteban; Besoaín-Saldaña, Alvaro; Horment-Lara, Giselle

2016-10-01

Manual therapy has shown clinical results in patients with knee osteoarthritis. However, the biomechanical aspects during functional tasks have not been explored in depth. Through surface electromyography, the medial and lateral co-contractions of the knee were measured while descending stairs, prior and posterior to applying a manual therapy protocol in the knee, with emphasis on techniques of joint mobilization and soft-tissue management. Sixteen females with slight or moderate knee osteoarthritis were recruited (eight experimental, eight control). It was observed that the lateral co-contraction index of the experimental group, posterior to intervention, increased by 11.7% (p = 0.014). The application of a manual therapy protocol with emphasis on techniques of joint mobilization and soft-tissue management modified lateral co-contraction, which would have a protective effect on the joint. Copyright © 2016 Elsevier Ltd. All rights reserved.

Implementation of Siemens USS protocol into LabVIEW.

PubMed

Hosek, P; Diblik, M

2011-10-01

This article gives basic overview of the USS protocol as a communication interface to drive Siemens frequency inverters. It presents our implementation of this protocol into LabVIEW, as there was permanent demand from the community of the users to have native LabVIEW implementation of the USS protocol. It also states encountered problems and their solutions. Copyright © 2011 Society for Laboratory Automation and Screening. Published by Elsevier Inc. All rights reserved.

Commerce Lab: Mission analysis and payload integration study

NASA Technical Reports Server (NTRS)

1984-01-01

The needs of an aggressive commercial microgravity program are identified, space missions are defined, and infrastructural issues are identified and analyzed. A commercial laboratory, commerce lab, is conceived to be one or more an array of carriers which would fly aboard the space shuttle and accommodate microgravity science experiment payloads. Commerce lab is seen as a logical transition between currently planned space shuttle missions and future microgravity missions centered around the space station.

Video indexing based on image and sound

NASA Astrophysics Data System (ADS)

Faudemay, Pascal; Montacie, Claude; Caraty, Marie-Jose

1997-10-01

Video indexing is a major challenge for both scientific and economic reasons. Information extraction can sometimes be easier from sound channel than from image channel. We first present a multi-channel and multi-modal query interface, to query sound, image and script through 'pull' and 'push' queries. We then summarize the segmentation phase, which needs information from the image channel. Detection of critical segments is proposed. It should speed-up both automatic and manual indexing. We then present an overview of the information extraction phase. Information can be extracted from the sound channel, through speaker recognition, vocal dictation with unconstrained vocabularies, and script alignment with speech. We present experiment results for these various techniques. Speaker recognition methods were tested on the TIMIT and NTIMIT database. Vocal dictation as experimented on newspaper sentences spoken by several speakers. Script alignment was tested on part of a carton movie, 'Ivanhoe'. For good quality sound segments, error rates are low enough for use in indexing applications. Major issues are the processing of sound segments with noise or music, and performance improvement through the use of appropriate, low-cost architectures or networks of workstations.

Lab-on-a-Disc Platform for Automated Chemical Cell Lysis.

PubMed

Seo, Moo-Jung; Yoo, Jae-Chern

2018-02-26

Chemical cell lysis is an interesting topic in the research to Lab-on-a-Disc (LOD) platforms on account of its perfect compatibility with the centrifugal spin column format. However, standard procedures followed in chemical cell lysis require sophisticated non-contact temperature control as well as the use of pressure resistant valves. These requirements pose a significant challenge thereby making the automation of chemical cell lysis on an LOD extremely difficult to achieve. In this study, an LOD capable of performing fully automated chemical cell lysis is proposed, where a combination of chemical and thermal methods has been used. It comprises a sample inlet, phase change material sheet (PCMS)-based temperature sensor, heating chamber, and pressure resistant valves. The PCMS melts and solidifies at a certain temperature and thus is capable of indicating whether the heating chamber has reached a specific temperature. Compared to conventional cell lysis systems, the proposed system offers advantages of reduced manual labor and a compact structure that can be readily integrated onto an LOD. Experiments using Salmonella typhimurium strains were conducted to confirm the performance of the proposed cell lysis system. The experimental results demonstrate that the proposed system has great potential in realizing chemical cell lysis on an LOD whilst achieving higher throughput in terms of purity and yield of DNA thereby providing a good alternative to conventional cell lysis systems.

Study on property and stability mechanism of LAB-AEO-4 system

NASA Astrophysics Data System (ADS)

Song, Kaifei; Ge, Jijiang; Wang, Yang; Zhang, Guicai; Jiang, Ping

2017-04-01

The behaviors of binary blending systems of fatty alcohol polyoxyethylene ether (AEO-4) blended with the laurel amide betaine (LAB) was investigated at 80°C,the results indicated that the optimal ratio of the mixed system of LAB-AEO-4 was 5:2. The stability mechanism of LAB-AEO-4 system was analyzed from three aspects of dynamic surface tension,gas permeation rate and surface rheology.The results showed that the tension of mixed system was easier to achieve balance,the constant of gas permeation rate of the mixed system decreased by about 7% and the elastic modulus and dilational modulus increased by about 2 times compared with the single LAB system.

Automatic Indexing for Content Analysis of Whale Recordings and XML Representation

NASA Astrophysics Data System (ADS)

Bénard, Frédéric; Glotin, Hervé

2010-12-01

This paper focuses on the robust indexing of sperm whale hydrophone recordings based on a set of features extracted from a real-time passive underwater acoustic tracking algorithm for multiple whales using four hydrophones. Acoustic localization permits the study of whale behavior in deep water without interfering with the environment. Given the position coordinates, we are able to generate different features such as the speed, energy of the clicks, Inter-Click-Interval (ICI), and so on. These features allow to construct different markers which allow us to index and structure the audio files. Thus, the behavior study is facilitated by choosing and accessing the corresponding index in the audio file. The complete indexing algorithm is processed on real data from the NUWC (Naval Undersea Warfare Center of the US Navy) and the AUTEC (Atlantic Undersea Test & Evaluation Center-Bahamas). Our model is validated by similar results from the US Navy (NUWC) and SOEST (School of Ocean and Earth Science and Technology) Hawaii university labs in a single whale case. Finally, as an illustration, we index a single whale sound file using the extracted whale's features provided by the tracking, and we present an example of an XML script structuring it.

The NASA Langley Isolator Dynamics Research Lab

NASA Technical Reports Server (NTRS)

Middleton, Troy F.; Balla, Robert J.; Baurle, Robert A.; Humphreys, William M.; Wilson, Lloyd G.

2010-01-01

The Isolator Dynamics Research Lab (IDRL) is under construction at the NASA Langley Research Center in Hampton, Virginia. A unique test apparatus is being fabricated to support both wall and in-stream measurements for investigating the internal flow of a dual-mode scramjet isolator model. The test section is 24 inches long with a 1-inch by 2-inch cross sectional area and is supplied with unheated, dry air through a Mach 2.5 converging-diverging nozzle. The test section is being fabricated with two sets (glass and metallic) of interchangeable sidewalls to support flow visualization and laser-based measurement techniques as well as static pressure, wall temperature, and high frequency pressure measurements. During 2010, a CFD code validation experiment will be conducted in the lab in support of NASA s Fundamental Aerodynamics Program. This paper describes the mechanical design of the Isolator Dynamics Research Lab test apparatus and presents a summary of the measurement techniques planned for investigating the internal flow field of a scramjet isolator model.

Comparison of the manual, semiautomatic, and automatic selection and leveling of hot spots in whole slide images for Ki-67 quantification in meningiomas.

PubMed

Swiderska, Zaneta; Korzynska, Anna; Markiewicz, Tomasz; Lorent, Malgorzata; Zak, Jakub; Wesolowska, Anna; Roszkowiak, Lukasz; Slodkowska, Janina; Grala, Bartlomiej

2015-01-01

Background. This paper presents the study concerning hot-spot selection in the assessment of whole slide images of tissue sections collected from meningioma patients. The samples were immunohistochemically stained to determine the Ki-67/MIB-1 proliferation index used for prognosis and treatment planning. Objective. The observer performance was examined by comparing results of the proposed method of automatic hot-spot selection in whole slide images, results of traditional scoring under a microscope, and results of a pathologist's manual hot-spot selection. Methods. The results of scoring the Ki-67 index using optical scoring under a microscope, software for Ki-67 index quantification based on hot spots selected by two pathologists (resp., once and three times), and the same software but on hot spots selected by proposed automatic methods were compared using Kendall's tau-b statistics. Results. Results show intra- and interobserver agreement. The agreement between Ki-67 scoring with manual and automatic hot-spot selection is high, while agreement between Ki-67 index scoring results in whole slide images and traditional microscopic examination is lower. Conclusions. The agreement observed for the three scoring methods shows that automation of area selection is an effective tool in supporting physicians and in increasing the reliability of Ki-67 scoring in meningioma.

Comparison of the Manual, Semiautomatic, and Automatic Selection and Leveling of Hot Spots in Whole Slide Images for Ki-67 Quantification in Meningiomas

PubMed Central

Swiderska, Zaneta; Korzynska, Anna; Markiewicz, Tomasz; Lorent, Malgorzata; Zak, Jakub; Wesolowska, Anna; Roszkowiak, Lukasz; Slodkowska, Janina; Grala, Bartlomiej

2015-01-01

Background. This paper presents the study concerning hot-spot selection in the assessment of whole slide images of tissue sections collected from meningioma patients. The samples were immunohistochemically stained to determine the Ki-67/MIB-1 proliferation index used for prognosis and treatment planning. Objective. The observer performance was examined by comparing results of the proposed method of automatic hot-spot selection in whole slide images, results of traditional scoring under a microscope, and results of a pathologist's manual hot-spot selection. Methods. The results of scoring the Ki-67 index using optical scoring under a microscope, software for Ki-67 index quantification based on hot spots selected by two pathologists (resp., once and three times), and the same software but on hot spots selected by proposed automatic methods were compared using Kendall's tau-b statistics. Results. Results show intra- and interobserver agreement. The agreement between Ki-67 scoring with manual and automatic hot-spot selection is high, while agreement between Ki-67 index scoring results in whole slide images and traditional microscopic examination is lower. Conclusions. The agreement observed for the three scoring methods shows that automation of area selection is an effective tool in supporting physicians and in increasing the reliability of Ki-67 scoring in meningioma. PMID:26240787

Indoor Air Quality Manual.

ERIC Educational Resources Information Center

Baldwin Union Free School District, NY.

This manual identifies ways to improve a school's indoor air quality (IAQ) and discusses practical actions that can be carried out by school staff in managing air quality. The manual includes discussions of the many sources contributing to school indoor air pollution and the preventive planning for each including renovation and repair work,…

Marketing Research. Instructor's Manual.

ERIC Educational Resources Information Center

Small Business Administration, Washington, DC.

Prepared for the Administrative Management Course Program, this instructor's manual was developed to serve small-business management needs. The sections of the manual are as follows: (1) Lesson Plan--an outline of material covered, which may be used as a teaching guide, presented in two columns: the presentation, and a step-by-step indication of…

Basic Emergency Medical Technician Skills Manual.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This manual was developed to help students preparing to become emergency medical technicians (EMTs) learn standardized basic skills in the field. The manual itemizes the steps and performance criteria of each required skill and uses an accompanying videotape series (not included) to enhance the educational experience. The five units of the manual,…

25 CFR 175.5 - Operations manual.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Provisions § 175.5 Operations manual. (a) The Area Director shall establish an operations manual for the... Director shall amend the operations manual as needed. (b) The public shall be notified by the Area Director... shall be published in local newspaper(s) of general circulation, posted at the utility office(s), and...

Regulations and Procedures Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, Lydia J.

The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnelmore » policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.« less

Regulations and Procedures Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, Lydia

The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertainingmore » to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.« less

Large-scale laboratory testing of bedload-monitoring technologies: overview of the StreamLab06 Experiments

USGS Publications Warehouse

Marr, Jeffrey D.G.; Gray, John R.; Davis, Broderick E.; Ellis, Chris; Johnson, Sara; Gray, John R.; Laronne, Jonathan B.; Marr, Jeffrey D.G.

2010-01-01

A 3-month-long, large-scale flume experiment involving research and testing of selected conventional and surrogate bedload-monitoring technologies was conducted in the Main Channel at the St. Anthony Falls Laboratory under the auspices of the National Center for Earth-surface Dynamics. These experiments, dubbed StreamLab06, involved 25 researchers and volunteers from academia, government, and the private sector. The research channel was equipped with a sediment-recirculation system and a sediment-flux monitoring system that allowed continuous measurement of sediment flux in the flume and provided a data set by which samplers were evaluated. Selected bedload-measurement technologies were tested under a range of flow and sediment-transport conditions. The experiment was conducted in two phases. The bed material in phase I was well-sorted siliceous sand (0.6-1.8 mm median diameter). A gravel mixture (1-32 mm median diameter) composed the bed material in phase II. Four conventional bedload samplers – a standard Helley-Smith, Elwha, BLH-84, and Toutle River II (TR-2) sampler – were manually deployed as part of both experiment phases. Bedload traps were deployed in study Phase II. Two surrogate bedload samplers – stationarymounted down-looking 600 kHz and 1200 kHz acoustic Doppler current profilers – were deployed in experiment phase II. This paper presents an overview of the experiment including the specific data-collection technologies used and the ambient hydraulic, sediment-transport and environmental conditions measured as part of the experiment. All data collected as part of the StreamLab06 experiments are, or will be available to the research community.

Estimation of an accuracy index of a diagnostic biomarker when the reference biomarker is continuous and measured with error.

PubMed

Wu, Mixia; Zhang, Dianchen; Liu, Aiyi

2016-01-01

New biomarkers continue to be developed for the purpose of diagnosis, and their diagnostic performances are typically compared with an existing reference biomarker used for the same purpose. Considerable amounts of research have focused on receiver operating characteristic curves analysis when the reference biomarker is dichotomous. In the situation where the reference biomarker is measured on a continuous scale and dichotomization is not practically appealing, an index was proposed in the literature to measure the accuracy of a continuous biomarker, which is essentially a linear function of the popular Kendall's tau. We consider the issue of estimating such an accuracy index when the continuous reference biomarker is measured with errors. We first investigate the impact of measurement errors on the accuracy index, and then propose methods to correct for the bias due to measurement errors. Simulation results show the effectiveness of the proposed estimator in reducing biases. The methods are exemplified with hemoglobin A1c measurements obtained from both the central lab and a local lab to evaluate the accuracy of the mean data obtained from the metered blood glucose monitoring against the centrally measured hemoglobin A1c from a behavioral intervention study for families of youth with type 1 diabetes.

Low Budget Biology 3: A Collection of Low Cost Labs and Activities.

ERIC Educational Resources Information Center

Wartski, Bert; Wartski, Lynn Marie

This document contains biology labs, demonstrations, and activities that use low budget materials. The goal is to get students involved in the learning process by experiencing biology. Each lab has a teacher preparation section which outlines the purpose of the lab, some basic information, a list of materials , and how to prepare the different…

14 CFR 21.308 - Quality manual.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Quality manual. 21.308 Section 21.308... PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and Appliances § 21.308 Quality manual. Each applicant for or holder of a PMA must provide a manual describing its quality system to the...

Learning Experience on Transformer Using HOT Lab for Pre-service Physics Teacher’s

NASA Astrophysics Data System (ADS)

Malik, A.; Setiawan, A.; Suhandi, A.; Permanasari, A.

2017-09-01

This study aimed at investigating pre-service teacher’s critical thinking skills improvement through Higher Order Thinking (HOT) Lab on transformer learning. This research used mix method with the embedded experimental model. Research subjects are 60 students of Physics Education in UIN Sunan Gunung Djati Bandung. The results showed that based on the results of the analysis of practical reports and observation sheet shows students in the experimental group was better in carrying out the practicum and can solve the real problem while the control group was going on the opposite. The critical thinking skills of students applying the HOT Lab were higher than the verification lab. Critical thinking skills could increase due to HOT Lab based problems solving that can develop higher order thinking skills through laboratory activities. Therefore, it was concluded that the application of HOT Lab was more effective than verification lab on improving students’ thinking skills on transformer topic learning. Finally, HOT Lab can be implemented in other subject learning and could be used to improve another higher order thinking skills.

Lab-on-a-Chip Pathogen Sensors for Food Safety

PubMed Central

Yoon, Jeong-Yeol; Kim, Bumsang

2012-01-01

There have been a number of cases of foodborne illness among humans that are caused by pathogens such as Escherichia coli O157:H7, Salmonella typhimurium, etc. The current practices to detect such pathogenic agents are cell culturing, immunoassays, or polymerase chain reactions (PCRs). These methods are essentially laboratory-based methods that are not at all real-time and thus unavailable for early-monitoring of such pathogens. They are also very difficult to implement in the field. Lab-on-a-chip biosensors, however, have a strong potential to be used in the field since they can be miniaturized and automated; they are also potentially fast and very sensitive. These lab-on-a-chip biosensors can detect pathogens in farms, packaging/processing facilities, delivery/distribution systems, and at the consumer level. There are still several issues to be resolved before applying these lab-on-a-chip sensors to field applications, including the pre-treatment of a sample, proper storage of reagents, full integration into a battery-powered system, and demonstration of very high sensitivity, which are addressed in this review article. Several different types of lab-on-a-chip biosensors, including immunoassay- and PCR-based, have been developed and tested for detecting foodborne pathogens. Their assay performance, including detection limit and assay time, are also summarized. Finally, the use of optical fibers or optical waveguide is discussed as a means to improve the portability and sensitivity of lab-on-a-chip pathogen sensors. PMID:23112625

Variable Lifting Index (VLI)

PubMed Central

Waters, Thomas; Occhipinti, Enrico; Colombini, Daniela; Alvarez-Casado, Enrique; Fox, Robert

2015-01-01

Objective: We seek to develop a new approach for analyzing the physical demands of highly variable lifting tasks through an adaptation of the Revised NIOSH (National Institute for Occupational Safety and Health) Lifting Equation (RNLE) into a Variable Lifting Index (VLI). Background: There are many jobs that contain individual lifts that vary from lift to lift due to the task requirements. The NIOSH Lifting Equation is not suitable in its present form to analyze variable lifting tasks. Method: In extending the prior work on the VLI, two procedures are presented to allow users to analyze variable lifting tasks. One approach involves the sampling of lifting tasks performed by a worker over a shift and the calculation of the Frequency Independent Lift Index (FILI) for each sampled lift and the aggregation of the FILI values into six categories. The Composite Lift Index (CLI) equation is used with lifting index (LI) category frequency data to calculate the VLI. The second approach employs a detailed systematic collection of lifting task data from production and/or organizational sources. The data are organized into simplified task parameter categories and further aggregated into six FILI categories, which also use the CLI equation to calculate the VLI. Results: The two procedures will allow practitioners to systematically employ the VLI method to a variety of work situations where highly variable lifting tasks are performed. Conclusions: The scientific basis for the VLI procedure is similar to that for the CLI originally presented by NIOSH; however, the VLI method remains to be validated. Application: The VLI method allows an analyst to assess highly variable manual lifting jobs in which the task characteristics vary from lift to lift during a shift. PMID:26646300

Allergen screening bioassays: recent developments in lab-on-a-chip and lab-on-a-disc systems.

PubMed

Ho, Ho-pui; Lau, Pui-man; Kwok, Ho-chin; Wu, Shu-yuen; Gao, Minghui; Cheung, Anthony Ka-lun; Chen, Qiulan; Wang, Guanghui; Kwan, Yiu-wa; Wong, Chun-kwok; Kong, Siu-kai

2014-01-01

Allergies occur when a person's immune system mounts an abnormal response with or without IgE to a normally harmless substance called an allergen. The standard skin-prick test introduces suspected allergens into the skin with lancets in order to trigger allergic reactions. This test is annoying and sometimes life threatening. New tools such as lab-on-a-chip and lab-on-a-disc, which rely on microfabrication, are designed for allergy testing. These systems provide benefits such as short analysis times, enhanced sensitivity, simplified procedures, minimal consumption of sample and reagents and low cost. This article gives a summary of these systems. In particular, a cell-based assay detecting both the IgE- and non-IgE-type triggers through the study of degranulation in a centrifugal microfluidic system is highlighted.

A Big Bang Lab

ERIC Educational Resources Information Center

Scheider, Walter

2005-01-01

The February 2005 issue of The Science Teacher (TST) reminded everyone that by learning how scientists study stars, students gain an understanding of how science measures things that can not be set up in lab, either because they are too big, too far away, or happened in a very distant past. The authors of "How Far are the Stars?" show how the…

Research and Teaching. Effects of a Research-Based Ecology Lab Course: A Study of Nonvolunteer Achievement, Self-Confidence, and Perception of Lab Course Purpose

ERIC Educational Resources Information Center

Kloser, Matthew J.; Brownell, Sara E.; Shavelson, Richard J.; Fukami, Tadashi

2013-01-01

Undergraduate biology lab courses have long been criticized for engaging students in "cookbook" experiences in which students follow a given protocol to collect data that help answer a predetermined question. Recent reform documents in biology education have suggested that students should engage in lab courses that provide more authentic…

Reconceptualising manual therapy skills in contemporary practice.

PubMed

Rabey, Martin; Hall, Toby; Hebron, Clair; Palsson, Thorvaldur Skuli; Christensen, Steffan Wittrup; Moloney, Niamh

2017-06-01

With conflicting evidence regarding the effectiveness of manual therapy calls have arisen within some quarters of the physiotherapy profession challenging the continued use of manual skills for assessment and treatment. A reconceptualisation of the importance of manual examination findings is put forward, based upon a contemporary understanding of pain science, rather than considering these skills only in terms of how they should "guide" manual therapy interventions. The place for manual examination findings within complex, multidimensional presentations is considered using vignettes describing the presentations of five people with low back pain. As part of multidimensional, individualised management, the balance of evidence relating to the effectiveness, mechanisms of action and rationale for manual skills is discussed. It is concluded that if manual examination and therapeutic skills are used in a manner consistent with a contemporary understanding of pain science, multidimensional patient profiles and a person-centred approach, their selective and judicious use still has an important role. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pain, fatigue, function and participation among long-term manual wheelchair users partnered with a mobility service dog.

PubMed

Vincent, Claude; Gagnon, Dany H; Dumont, Frédéric

2017-11-20

To assess the effects of a mobility service dog (MSD) on pain, fatigue, wheelchair-related functional tasks, participation and satisfaction among manual wheelchair users over a nine-month period. A longitudinal study with repeated assessment times before and three, six and nine months after intervention was achieved. Intervention consisted in partnering each participant with a MSD. The setting is a well-established provincial service dog training school and participants homes. A convenience sample of 24 long-term manual wheelchair users with a spinal cord injury was involved. Outcome measures were: Wheelchair User's Shoulder Pain Index (WUSPI), Rate of Perceived Exertion (RPE), vitality scale from the SF-36, grip strength, Wheelchair Skills Test (WST), Canadian Occupational Performance Measure (COPM), Reintegration to Normal Living Index (RNLI), Life Space Assessment, Psychosocial Impact of Assistive Devices Scale (PIADS) and Quebec User Evaluation of Satisfaction with assistive Technology (QUEST 2.0). Shoulder and wrist pain as well as fatigue decreased significantly over time with the use of a MSD as evidenced by scores from WUSPI, RPE and SF-36 (feeling less worn out). Manual wheelchair propulsion skills (steep slopes, soft surfaces and thresholds) improved significantly over time as confirmed by the WST. Participation increased significantly over time as revealed by the COPM (for five occupations) and the RNLI (for five items). Satisfaction with the MSD was high over time (QUEST: nine items) and with a high positive psychosocial impact (PIADS: 10 items). MSD represents a valuable mobility assistive technology option for manual wheelchair users. IMPLICATIONS FOR REHABILITATION   For manual wheelchair users partenered with mobility service dog  • Shoulder pain and fatigue significantly decreased and continued to decrease between the third and sixth month and the ninth month.   • Performance with propelling the wheelchair up steep slopes

Logistics in the Computer Lab.

ERIC Educational Resources Information Center

Cowles, Jim

1989-01-01

Discusses ways to provide good computer laboratory facilities for elementary and secondary schools. Topics discussed include establishing the computer lab and selecting hardware; types of software; physical layout of the room; printers; networking possibilities; considerations relating to the physical environment; and scheduling methods. (LRW)

State of the Lab Address

ScienceCinema

King, Alex

2018-05-07

In his third-annual State of the Lab address, Ames Laboratory Director Alex King called the past year one of "quiet but strong progress" and called for Ames Laboratory to continue to build on its strengths while responding to changing expectations for energy research.

State of the Lab Address

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, Alex

2010-01-01

In his third-annual State of the Lab address, Ames Laboratory Director Alex King called the past year one of "quiet but strong progress" and called for Ames Laboratory to continue to build on its strengths while responding to changing expectations for energy research.

A Lab for All Reasons.

ERIC Educational Resources Information Center

Cronin-Jones, Linda L.

1990-01-01

Described is a demonstration science laboratory at the University of Florida. Discussed is laboratory design, including instructional space, lab stations, sink areas, safety areas, and a storage and distribution area. The impact of this type of design is cited. Diagrams and photographs are included. (CW)

Efficacy of two different toothbrush heads on a sonic power toothbrush compared to a manual toothbrush on established gingivitis and plaque.

PubMed

Nathoo, Salim; Mateo, Luis R; Chaknis, Patricia; Kemp, James H; Gatzemeyer, John; Morrison, Boyce M; Panagakos, Fotinos

2014-01-01

To evaluate the efficacy of a power toothbrush with distinct multi-directional cleaning action using two different heads (Colgate ProClinical C200 toothbrush with either a triple clean head or a sensitive head) as compared to a manual flat-trim toothbrush (Oral B Indicator toothbrush) on supragingival plaque and established gingivitis. This examiner-blind, randomized, controlled, three-treatment, parallel-group clinical research study assessed plaque removal via the comparison of pre- to post-brushing after a single use and again after four weeks of use, using the Rustogi Modified Navy Plaque Index. This study also assessed gingivitis at four weeks using the Löe-Silness Gingival Index. Qualifying adult male and female subjects from the central New Jersey, USA area reported to the study site after refraining from any oral hygiene procedures for 24 hours, and from eating, drinking, and smoking for four hours. Following an examination for plaque and gingivitis, they were randomized into three balanced groups. Subjects were instructed to brush their teeth for two minutes under supervision with their assigned toothbrush and a commercially available toothpaste (Colgate Cavity Protection toothpaste), after which they were again evaluated for plaque. Subjects were dismissed from the study site with the toothpaste and their assigned toothbrush to use at home twice daily for the next four weeks. They reported to the study site after four weeks of product use, at which time they were evaluated for plaque and gingivitis. One hundred twenty (120) enrolled subjects complied with the protocol and completed the clinical study. The results of the study indicated that all three test products provided statistically significant reductions in pre-brushing to post-brushing plaque scores for whole mouth and interproximal sites after a single use. For gingival margin plaque sites, only the Colgate ProClinical C200 toothbrush, with either the triple clean head or the sensitive head

Human Engineering Modeling and Performance Lab Study Project

NASA Technical Reports Server (NTRS)

Oliva-Buisson, Yvette J.

2014-01-01

The HEMAP (Human Engineering Modeling and Performance) Lab is a joint effort between the Industrial and Human Engineering group and the KAVE (Kennedy Advanced Visualiations Environment) group. The lab consists of sixteen camera system that is used to capture human motions and operational tasks, through te use of a Velcro suit equipped with sensors, and then simulate these tasks in an ergonomic software package know as Jac, The Jack software is able to identify the potential risk hazards.

Validation of Agricultural Mechanics Curriculum Manual.

ERIC Educational Resources Information Center

Hatcher, Elizabeth; And Others

This study was concerned with the validation of the Oklahoma Curriculum and Instructional Materials Center's agricultural mechanics curriculum manual and the development of a model whereby future manuals can be validated. Five units in the manual were randomly selected from a list of units to be taught during the second semester of the 1977-78…

Promoting Metacognition in Introductory Calculus-based Physics Labs

NASA Astrophysics Data System (ADS)

Grennell, Drew; Boudreaux, Andrew

2010-10-01

In the Western Washington University physics department, a project is underway to develop research-based laboratory curriculum for the introductory calculus-based course. Instructional goals not only include supporting students' conceptual understanding and reasoning ability, but also providing students with opportunities to engage in metacognition. For the latter, our approach has been to scaffold reflective thinking with guided questions. Specific instructional strategies include analysis of alternate reasoning presented in fictitious dialogues and comparison of students' initial ideas with their lab group's final, consensus understanding. Assessment of student metacognition includes pre- and post- course data from selected questions on the CLASS survey, analysis of written lab worksheets, and student opinion surveys. CLASS results are similar to a traditional physics course and analysis of lab sheets show that students struggle to engage in a metacognitive process. Future directions include video studies, as well as use of additional written assessments adapted from educational psychology.

Accuracy of digital American Board of Orthodontics Discrepancy Index measurements.

PubMed

Dragstrem, Kristina; Galang-Boquiren, Maria Therese S; Obrez, Ales; Costa Viana, Maria Grace; Grubb, John E; Kusnoto, Budi

2015-07-01

A digital analysis that is shown to be accurate will ease the demonstration of initial case complexity. To date, no literature exists on the accuracy of the digital American Board of Orthodontics Discrepancy Index (DI) calculations when applied to pretreatment digital models. Plaster models were obtained from 45 previous patients with varying degrees of malocclusion. Total DI scores and the target disorders were computed manually with a periodontal probe on the original plaster casts (gold standard) and digitally using Ortho Insight 3D (Motion View Software, Hixson, Tenn) and OrthoCAD (Cadent, Carlstadt, NJ). Intrarater and interrater reliabilities were assessed for 15 subjects using the Spearman rho correlation test. Accuracies of the DI scores and target disorders were assessed for all 45 subjects using Wilcoxon signed ranks tests. Intrarater and interrater reliabilities were high for total DI scores and most target disorders (r > 0.8). No significant difference was found between total DI score when measured with OrthoCAD compared with manual calculations. The total DI scores calculated by Ortho Insight 3D were found to be significantly greater than those by manual calculation by 2.71 points. The findings indicate that a DI calculated by Ortho Insight 3D may lead the clinician to overestimate case complexity. OrthoCAD's DI module was demonstrated to be a clinically acceptable alternative to manual calculation of the total scores. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Comparison between simulations and lab results on the ASSIST test-bench

NASA Astrophysics Data System (ADS)

Le Louarn, Miska; Madec, Pierre-Yves; Kolb, Johann; Paufique, Jerome; Oberti, Sylvain; La Penna, Paolo; Arsenault, Robin

2016-07-01

We present the latest comparison results between laboratory tests carried out on the ASSIST test bench and Octopus end-to end simulations. We simulated, as closely to the lab conditions as possible, the different AOF modes (Maintenance and commissioning mode (SCAO), GRAAL (GLAO in the near IR), Galacsi Wide Field mode (GLAO in the visible) and Galacsi narrow field mode (LTAO in the visible)). We then compared the simulation results to the ones obtained on the lab bench. Several aspects were investigated, like number of corrected modes, turbulence wind speeds, LGS photon flux etc. The agreement between simulations and lab is remarkably good for all investigated parameters, giving great confidence in both simulation tool and performance of the AO system in the lab.

AIS training manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, C.F.; Barancik, J.I.

1989-05-01

This Training Manual was developed by the Injury Prevention and Analysis Group (IPAG) as part of a training program in AIS 85 and AIS-EM (Epidemiological Modifications) coding. The IPAG Program is designed primarily to train medical record and other health professionals from diverse backgrounds and experience levels in the use of AIS 85 and AIS 85-EM. The Manual is designed to be used as a reference text after completion of the Program and includes copies of visual projection materials used during the training sessions.

Equipment Management Manual

NASA Technical Reports Server (NTRS)

1992-01-01

The NASA Equipment Management Manual (NHB 4200.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958, as amended (42 USC 2473), and sets forth policy, uniform performance standards, and procedural guidance to NASA personnel for the acquisition, management, and use of NASA-owned equipment. This revision is effective upon receipt. This is a controlled manual, issued in loose-leaf form, and revised through page changes. Additional copies for internal use may be obtained through normal distribution.

Generator Inspection Report: Bio - Lab, Inc.

EPA Pesticide Factsheets

Contains report from Georgia Department of Natural Resources of July 21, 1999 inspection of the Bio - Lab Incorporated Plant 4 in Conyers, Rockdale County, Georgia, reporting that no violations were observed.

[Manual therapy in general practice].

PubMed

Березуцкий, Владимир И

2016-01-01

The article is devoted to manual therapy practice for diagnostics and treatment of vertebrogenic pain syndrome in general practice. Analytical roundup of sources proves medical advantage of implementation of manual therapy basic methods by general practice specialists.

Missouri Highway Safety Manual Recalibration

DOT National Transportation Integrated Search

2018-05-01

The Highway Safety Manual (HSM) is a national manual for analyzing the highway safety of various facilities, including rural roads, urban arterials, freeways, and intersections. The HSM was first published in 2010, and a 2014 supplement addressed fre...

The Design of NetSecLab: A Small Competition-Based Network Security Lab

ERIC Educational Resources Information Center

Lee, C. P.; Uluagac, A. S.; Fairbanks, K. D.; Copeland, J. A.

2011-01-01

This paper describes a competition-style of exercise to teach system and network security and to reinforce themes taught in class. The exercise, called NetSecLab, is conducted on a closed network with student-formed teams, each with their own Linux system to defend and from which to launch attacks. Students are expected to learn how to: 1) install…

Attracting STEM talent: do STEM students prefer traditional or work/life-interaction labs?

PubMed

DeFraine, William C; Williams, Wendy M; Ceci, Stephen J

2014-01-01

The demand for employees trained in science, technology, engineering, and mathematics (STEM) fields continues to increase, yet the number of Millennial students pursuing STEM is not keeping pace. We evaluated whether this shortfall is associated with Millennials' preference for flexibility and work/life-interaction in their careers-a preference that may be inconsistent with the traditional idea of a science career endorsed by many lab directors. Two contrasting approaches to running STEM labs and training students were explored, and we created a lab recruitment video depicting each. The work-focused video emphasized the traditional notions of a science lab, characterized by long work hours and a focus on individual achievement and conducting research above all else. In contrast, the work/life-interaction-focused video emphasized a more progressive view - lack of demarcation between work and non-work lives, flexible hours, and group achievement. In Study 1, 40 professors rated the videos, and the results confirmed that the two lab types reflected meaningful real-world differences in training approaches. In Study 2, we recruited 53 current and prospective graduate students in STEM fields who displayed high math-identification and a commitment to science careers. In a between-subjects design, they watched one of the two lab-recruitment videos, and then reported their anticipated sense of belonging to and desire to participate in the lab depicted in the video. Very large effects were observed on both primary measures: Participants who watched the work/life-interaction-focused video reported a greater sense of belonging to (d = 1.49) and desire to participate in (d = 1.33) the lab, relative to participants who watched the work-focused video. These results suggest Millennials possess a strong desire for work/life-interaction, which runs counter to the traditional lab-training model endorsed by many lab directors. We discuss implications of these findings for STEM

Christmas Tree Pest Manual

Treesearch

Department of Entomology Michigan State University

1998-01-01

This manual can help you identify and control damaging Christmas tree pests in the North Central region of the United States. Most of the information also applies to the northeastern states and to the southern portions of the Canadian Provinces that border these states. You do not have to be a pest specialist to use this information; we wrote the manual in everyday...

Boating Safety Training Manual.

ERIC Educational Resources Information Center

Coast Guard, Washington, DC.

The training manual serves as the text for the Coast Guard's boating safety 32-hour course and for the D-8 Qualification Code Recertification Course. The manual is designed for self-study or for use with an instructor-led course. Each chapter concludes with a quiz to be used as a review of chaper content. Opening chapters review the use of the…

The NASTRAN User's Manual (Level 15)

NASA Technical Reports Server (NTRS)

Mccormick, C. W. (Editor)

1972-01-01

The User's manual for the NASA Structural Analysis (NASTRAN) program is presented. The manual contains all information needed to solve problems with NASTRAN. The volume is instructional and encyclopedic. The manual includes instruction in structural modeling techniques, instruction in input preparation, and information to assist the interpretation of the output. Descriptions of all input data cards, restart procedures, and diagnostic messages are developed.

Course Manual for X-Ray Measurements.