Notification: Preliminary Research on EPA's Design for the Environment Product Labeling Program OIG
Project #OPE-FY14-4012, November 06, 2013. The Office of Inspector General (OIG) is starting preliminary research on the U.S. Environmental Protection Agency’s (EPA’s) Design for the Environment (DfE) Product Labeling Program.
76 FR 75809 - Prior Label Approval System: Generic Label Approval
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-05
... tracking and reporting systems; and (4) design and implement a survey of the effects of the limited generic... and poultry product inspection programs designed to assure consumers that meat and poultry products... mandatory features are designed to ensure that meat and poultry products are accurately and truthfully...
Design of Standards and Labeling programs in Chile: Techno-Economic Analysis for Refrigerators
DOE Office of Scientific and Technical Information (OSTI.GOV)
Letschert, Virginie E.; McNeil, Michael A.; Pavon, Mariana
2013-05-01
Lawrence Berkeley National Laboratory is a global leader in the study of energy efficiency and its effective implementation through government policy. The Energy Analysis and Environmental Impacts Department of LBNL’s Environmental Energy Technologies Division provides technical assistance to help federal, stat e and local government agencies in the United States, and throughout the world, develop long-term strategies, policy, and programs to encourage energy efficiency in all sectors and industries. In the past, LBNL has assisted staff of various countries government agencies and their con tractors in providing methodologies to analyze cost-effectiveness of regulations and asses s overall national impacts ofmore » efficiency programs. The paper presents the work done in collaboration with the Ministry of Energy (MoE) in Chile and the Collaborative Labeling Appliance Standards Programs (CLASP) on designing a Minimum Energy Performance Standards (MEPS) and ext ending the current labeling program for refrigerators.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wiel, Stephen; McMahon, James E.
2005-04-28
Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and several other organizations identified on the cover of this guidebook recognize the need to support policy makers in their efforts tomore » implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This second edition of the guidebook was prepared over the course of the past year, four years after the preparation of the first edition, with a significant contribution from the authors and reviewers mentioned previously. Their diligent participation helps maintain this book as the international guidance tool it has become. The lead authors would like to thank the members of the Communications Office of the Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory for their support in the development, production, and distribution of the guidebook. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsor to distribute copies of this book worldwide, at no charge, for the general public benefit. The guidebook is also available on the web at www.clasponline.org and may be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.« less
Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting
DOE Office of Scientific and Technical Information (OSTI.GOV)
McMahon, James E.; Wiel, Stephen
2001-02-16
Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and the United Nations Foundation (UNF) recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labelingmore » programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This guidebook was prepared over the course of the past year with significant contribution from the authors and reviewers mentioned previously. Their diligent participation has made this the international guidance tool it was intended to be. The lead authors would also like to thank the following individuals for their support in the development, production, and distribution of the guidebook: Marcy Beck, Elisa Derby, Diana Dhunke, Ted Gartner, and Julie Osborn of Lawrence Berkeley National Laboratory as well as Anthony Ma of Bevilacqua-Knight, Inc. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards-setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsors to distribute copies of this book worldwide at no charge for the general public benefit. The guidebook is also available on the web at www.CLASPonline.org and can be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.« less
Validation of a poison prevention program.
Braden, B T
1979-01-01
The effectiveness of an empirically designed poison warning label and an educational program for three and four year old children was assessed in four groups of 39 such children, with one group serving as a control. The educational program appeared to improve intellectual (verbal) awareness of poisons, the label to improve visual discrimination, and the combination of the two to have the greatest overall impact. Images p943-a PMID:474851
Health Indicators: A Tool for Program Review
ERIC Educational Resources Information Center
Abou-Sayf, Frank K.
2006-01-01
A visual tool used to evaluate instructional program performance has been designed by the University of Hawaii Community College system. The tool combines features from traffic lights, blood-chemistry test reports, and industry production control charts, and is labeled the Program Health-Indicator Chart. The tool was designed to minimize the labor…
Safer Choice Partner of the Year Awards Application Form
EPA's Design for the Environment program developed the Safer Product Labeling Program Partner of the Year Award program to recognize DfE stakeholders that have furthered the safer chemistry goals of the program
Pilot Evaluation of an In-Store Nutrition Label Education Program.
Dukeshire, Steven; Nicks, Emily; Ferguson, Jennifer
2014-12-01
To describe and provide recommendations for the implementation of an evaluation for an already existing, in-store Nutrition Label Education Program (NLEP). We describe the development and implementation of an evaluation consisting of a pre- and postsurvey and one month follow-up. The evaluation was designed to assess satisfaction with the NLEP as well as changes in participant nutrition label knowledge, confidence in using nutrition labels, and actual changes in nutrition label use. Nineteen participants took part in the pilot evaluation. The evaluation was successful in demonstrating high levels of satisfaction with the NLEP as well as positive changes in participant confidence and some increased knowledge in using nutrition labels. However, only 3 people participated in the follow-up, limiting the ability to assess behaviour change. Ideally, NLEPs should include ongoing evaluation that extends beyond just assessing participant satisfaction. Recommendations are provided for conducting such evaluations, including the importance of incorporating the evaluation into the program itself, using existing questionnaires when possible, and employing pre- and postsurveys as well as follow-up interviews to assess change.
40 CFR 172.25 - Administration of State programs.
Code of Federal Regulations, 2010 CFR
2010-07-01
... sufficient information, including a confidential statement of formula for any new product, to enable the... and this subpart. (c) Labeling. (1) New products shall bear labeling satisfying the requirements of... distributed with the product. (2) The designated State agency may permit an EPA or State registered pesticide...
Economic-Analysis Program for a Communication System
NASA Technical Reports Server (NTRS)
Chamberlain, R. G.
1986-01-01
Prices and profits of alternative designs compared. Objective of Land Mobile Satellite Service Finance Report (LMSS) program is to provide means for comparing alternative designs of LMSS systems. Program is Multiplan worksheet program. Labels used in worksheet chosen for satellite-based cellular communication service, but analysis not restricted to such cases. LMSS written for interactive execution with Multiplan (version 1.2) and implemented on IBM PC series computer operating under DOS (version 2.11).
Understanding the Promise: A Typology of State and Local College Promise Programs
ERIC Educational Resources Information Center
Perna, Laura W.; Leigh, Elaine W.
2018-01-01
Over the past decade, but especially in the past few years, programs with a "promise" label have been advanced at the local, state, and federal levels. To advance understanding of the design, implementation, and impact of the many different versions of emerging programs, policymakers, practitioners, and researchers need an organizing…
Archiving Spectral Libraries in the Planetary Data System
NASA Astrophysics Data System (ADS)
Slavney, S.; Guinness, E. A.; Scholes, D.; Zastrow, A.
2017-12-01
Spectral libraries are becoming popular candidates for archiving in PDS. With the increase in the number of individual investigators funded by programs such as NASA's PDART, the PDS Geosciences Node is receiving many requests for support from proposers wishing to archive various forms of laboratory spectra. To accommodate the need for a standardized approach to archiving spectra, the Geosciences Node has designed the PDS Spectral Library Data Dictionary, which contains PDS4 classes and attributes specifically for labeling spectral data, including a classification scheme for samples. The Reflectance Experiment Laboratory (RELAB) at Brown University, which has long been a provider of spectroscopy equipment and services to the science community, has provided expert input into the design of the dictionary. Together the Geosciences Node and RELAB are preparing the whole of the RELAB Spectral Library, consisting of many thousands of spectra collected over the years, to be archived in PDS. An online interface for searching, displaying, and downloading selected spectra is planned, using the Spectral Library metadata recorded in the PDS labels. The data dictionary and online interface will be extended to include spectral libraries submitted by other data providers. The Spectral Library Data Dictionary is now available from PDS at https://pds.nasa.gov/pds4/schema/released/. It can be used in PDS4 labels for reflectance spectra as well as for Raman, XRF, XRD, LIBS, and other types of spectra. Ancillary data such as images, chemistry, and abundance data are also supported. To help generate PDS4-compliant labels for spectra, the Geosciences Node provides a label generation program called MakeLabels (http://pds-geosciences.wustl.edu/tools/makelabels.html) which creates labels from a template, and which can be used for any kind of PDS4 label. For information, contact the Geosciences Node at geosci@wunder.wustl.edu.
Screen Miniatures as Icons for Backward Navigation in Content-Based Software.
ERIC Educational Resources Information Center
Boling, Elizabeth; Ma, Guoping; Tao, Chia-Wen; Askun, Cengiz; Green, Tim; Frick, Theodore; Schaumburg, Heike
Users of content-based software programs, including hypertexts and instructional multimedia, rely on the navigation functions provided by the designers of those program. Typical navigation schemes use abstract symbols (arrows) to label basic navigational functions like moving forward or backward through screen displays. In a previous study, the…
Data Availability in Appliance Standards and Labeling Program Development and Evaluation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Romankiewicz, John; Khanna, Nina; Vine, Edward
2013-05-01
In this report, we describe the necessary data inputs for both standards development and program evaluation and perform an initial assessment of the availability and uncertainty of those data inputs in China. For standards development, we find that China and its standards and labeling program administrators currently has access to the basic market and technical data needed for conducting market and technology assessment and technological and economic analyses. Some data, such as shipments data, is readily available from the China Energy Label product registration database while the availability of other data, including average unit energy consumption, prices and design options,more » needs improvement. Unlike some other countries such as the United States, most of the necessary data for conducting standards development analyses are not publicly available or compiled in a consolidated data source. In addition, improved data on design and efficiency options as well as cost data (e.g., manufacturing costs, mark-ups, production and product use-phase costs) – key inputs to several technoeconomic analyses – are particularly in need given China’s unconsolidated manufacturing industry. For program evaluation, we find that while China can conduct simple savings evaluations on its incentive programs with the data it currently has available from the Ministry of Finance – the program administrator, the savings estimates produced by such an evaluation will carry high uncertainty. As such, China could benefit from an increase in surveying and metering in the next one to three years to decrease the uncertainty surrounding key data points such as unit energy savings and free ridership.« less
Image labeling. The need for a better look.
Hunter, T
1994-10-01
The important message in this editorial is for radiologists to critically examine how well images are labeled in their own department. If it is not satisfactory, then institute corrective measures. These can range from sophisticated computer programs for printing flashcards to merely sending the chief technologist all those films one comes across with unreadable labels. The quality of the image labeling should also be a consideration when purchasing CT, MRI, ultrasound, computed radiography and digital angiography equipment. The fact that you consider this important should be communicated to equipment manufacturers in the hope that they will pay more attention to it and offer more flexibility for each department to design its own labels. In any event, I feel consistently bad film labeling results in sloppy radiology with possible patient harm and unpleasant legal consequences for the radiologist.
Adoption and Design of Emerging Dietary Policies to Improve Cardiometabolic Health in the US.
Huang, Yue; Pomeranz, Jennifer; Wilde, Parke; Capewell, Simon; Gaziano, Tom; O'Flaherty, Martin; Kersh, Rogan; Whitsel, Laurie; Mozaffarian, Dariush; Micha, Renata
2018-04-14
Suboptimal diet is a leading cause of cardiometabolic disease and economic burdens. Evidence-based dietary policies within 5 domains-food prices, reformulation, marketing, labeling, and government food assistance programs-appear promising at improving cardiometabolic health. Yet, the extent of new dietary policy adoption in the US and key elements crucial to define in designing such policies are not well established. We created an inventory of recent US dietary policy cases aiming to improve cardiometabolic health and assessed the extent of their proposal and adoption at federal, state, local, and tribal levels; and categorized and characterized the key elements in their policy design. Recent federal dietary policies adopted to improve cardiometabolic health include reformulation (trans-fat elimination), marketing (mass-media campaigns to increase fruits and vegetables), labeling (Nutrition Facts Panel updates, menu calorie labeling), and food assistance programs (financial incentives for fruits and vegetables in the Supplemental Nutrition Assistance Program (SNAP) and Women, Infant and Children (WIC) program). Federal voluntary guidelines have been proposed for sodium reformulation and food marketing to children. Recent state proposals included sugar-sweetened beverage (SSB) taxes, marketing restrictions, and SNAP restrictions, but few were enacted. Local efforts varied significantly, with certain localities consistently leading in the proposal or adoption of relevant policies. Across all jurisdictions, most commonly selected dietary targets included fruits and vegetables, SSBs, trans-fat, added sugar, sodium, and calories; other healthy (e.g., nuts) or unhealthy (e.g., processed meats) factors were largely not addressed. Key policy elements to define in designing these policies included those common across domains (e.g., level of government, target population, dietary target, dietary definition, implementation mechanism), and domain-specific (e.g., media channels for food marketing domain) or policy-specific (e.g., earmarking for taxes) elements. Characteristics of certain elements were similarly defined (e.g., fruit and vegetable definition, warning language used in SSB warning labels), while others varied across cases within a policy (e.g., tax base for SSB taxes). Several key elements were not always sufficiently characterized in government documents, and dietary target selections and definitions did not consistently align with the evidence-base. These findings highlight recent action on dietary policies to improve cardiometabolic health in the US; and key elements necessary to design such policies.
38 CFR 41.520 - Major program determination.
Code of Federal Regulations, 2011 CFR
2011-07-01
... auditor shall identify the larger Federal programs, which shall be labeled Type A programs. Type A... programs not labeled Type A under paragraph (b)(1) of this section shall be labeled Type B programs. (3... programs as Type A programs. When a Federal program providing loans significantly affects the number or...
Introduction to Programming in Logo Using LogoWriter. Revised Edition.
ERIC Educational Resources Information Center
Yoder, Sharon Burrowes
This book is designed to teach LogoWriter, a programming language. Each of the 41 small chapters focuses on a particular LogoWriter word or idea, and provides examples for practice and experimentation. Topics included are: (1) getting started with LogoWriter; (2) using repeat and label; (3) using color and random, shapes and stamp, fill and shade;…
Rooting out institutional corruption to manage inappropriate off-label drug use.
Rodwin, Marc A
2013-01-01
Prescribing drugs for uses that the FDA has not approved - off-label drug use - can sometimes be justified but is typically not supported by substantial evidence of effectiveness. At the root of inappropriate off-label drug use lie perverse incentives for pharmaceutical firms and flawed oversight of prescribing physicians. Typical reform proposals such as increased sanctions for manufacturers might reduce the incidence of unjustified off-label use, but they do not remove the source of the problem. Public policy should address the cause and control the practice. To manage inappropriate off-label drug use, off-label prescriptions must be tracked in order to monitor the risks and benefits and the manufacturers' conduct. Even more important, reimbursement rules should be changed so that manufacturers cannot profit from off-label sales. When off-label sales pass a critical threshold, manufacturers should also be required to pay for independent testing of the safety and effectiveness of off-label drug uses and for the FDA to review the evidence. Manufacturers should also finance, under FDA supervision, programs designed to warn physicians and the public about the risks of off-label drug use. © 2013 American Society of Law, Medicine & Ethics, Inc.
7 CFR 3052.520 - Major program determination.
Code of Federal Regulations, 2011 CFR
2011-01-01
... shall be labeled Type A programs. Type A programs are defined as Federal programs with Federal awards... Federal awards expended exceed $10 billion. (2) Federal programs not labeled Type A under paragraph (b)(1) of this section shall be labeled Type B programs. (3) The inclusion of large loan and loan guarantees...
Comparison of programs for preventing drug-nutrient interactions in hospitalized patients.
Gauthier, I; Malone, M; Lesar, T S; Aronovitch, S
1997-02-15
Three programs with different levels of pharmacist intervention designed to prevent drug-nutrient interactions (DNIs) were studied. Six drugs were selected for the study on the basis of their potential for involvement in significant DNIs and the hospital's drug-use profile. During a two-week control phase, the existing pharmacy system, in which no patient-specific information on DNIs is provided, was assessed. During the next four weeks, patients were randomly assigned to intervention 1, placement of a brightly colored label in the medication drawer and on the cover of the nursing medication card flip-chart, or to intervention 2, placement of the labels plus a five-minute structured patient-counseling session. Occurrence of DNIs and nurses' and patients' knowledge of DNIs were assessed. A DNI was defined as potentially altered drug absorption due to inappropriate timing or administration of a drug in relation to food. The occurrence of DNIs decreased significantly under the label system (from 24% to 19%) and under the combined label-counseling system (to 16%). However, the frequency of DNIs did not differ significantly between the two intervention groups. Patients' and nurses' knowledge of DNIs improved as a result of the interventions. The frequency of DNIs decreased when labels were used to alert nurses to proper medication timing.
Svenson, Gavin J.
2014-01-01
Abstract The collection of Mantodea of the National Museum of Natural History, Smithsonian Institution, includes 26 holotypes, 7 allotypes, 4 lectotypes, 23 paratypes, and 1 paralectotype. Four type specimens were designated as lectotypes within this work. Highly accurate measurement data, high resolution images of specimens and labels, verbatim label data, georeferenced coordinates, original and newly assigned database codes, and bibliographic data are presented for all primary types. Label data for all paratype specimens in the collection are provide in tabular form. The location of the USNM collection has been moved to the Cleveland Museum of Natural History as a loan under the Off-site Enhancement Program. PMID:25152673
Adaptable Constrained Genetic Programming: Extensions and Applications
NASA Technical Reports Server (NTRS)
Janikow, Cezary Z.
2005-01-01
An evolutionary algorithm applies evolution-based principles to problem solving. To solve a problem, the user defines the space of potential solutions, the representation space. Sample solutions are encoded in a chromosome-like structure. The algorithm maintains a population of such samples, which undergo simulated evolution by means of mutation, crossover, and survival of the fittest principles. Genetic Programming (GP) uses tree-like chromosomes, providing very rich representation suitable for many problems of interest. GP has been successfully applied to a number of practical problems such as learning Boolean functions and designing hardware circuits. To apply GP to a problem, the user needs to define the actual representation space, by defining the atomic functions and terminals labeling the actual trees. The sufficiency principle requires that the label set be sufficient to build the desired solution trees. The closure principle allows the labels to mix in any arity-consistent manner. To satisfy both principles, the user is often forced to provide a large label set, with ad hoc interpretations or penalties to deal with undesired local contexts. This unfortunately enlarges the actual representation space, and thus usually slows down the search. In the past few years, three different methodologies have been proposed to allow the user to alleviate the closure principle by providing means to define, and to process, constraints on mixing the labels in the trees. Last summer we proposed a new methodology to further alleviate the problem by discovering local heuristics for building quality solution trees. A pilot system was implemented last summer and tested throughout the year. This summer we have implemented a new revision, and produced a User's Manual so that the pilot system can be made available to other practitioners and researchers. We have also designed, and partly implemented, a larger system capable of dealing with much more powerful heuristics.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-24
... container labels and carton labeling design, is the second in a series of three planned guidance documents...] Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling Design To... entitled ``Safety Considerations for Container Labels and Carton Labeling Design to Minimize Medication...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fridley, David; Zheng, Nina; Zhou, Nan
Since the late 1970s, energy labeling programs and mandatory energy performance standards have been used in many different countries to improve the efficiency levels of major residential and commercial equipment. As more countries and regions launch programs covering a greater range of products that are traded worldwide, greater attention has been given to harmonizing the specific efficiency criteria in these programs and the test methods for measurements. For example, an international compact fluorescent light (CFL) harmonization initiative was launched in 2006 to focus on collaboration between Australia, China, Europe and North America. Given the long history of standards and labelingmore » programs, most major energy-consuming residential appliances and commercial equipment are already covered under minimum energy performance standards (MEPS) and/or energy labels. For these products, such as clothes washers and CFLs, harmonization may still be possible when national MEPS or labeling thresholds are revised. Greater opportunity for harmonization exists in newer energy-consuming products that are not commonly regulated but are under consideration for new standards and labeling programs. This may include commercial products such as water dispensers and vending machines, which are only covered by MEPS or energy labels in a few countries or regions. As China continues to expand its appliance standards and labeling programs and revise existing standards and labels, it is important to learn from recent international experiences with efficiency criteria and test procedures for the same products. Specifically, various types of standards and labeling programs already exist in North America, Europe and throughout Asia for products in China's 2010 standards and labeling programs, namely clothes washers, water dispensers, vending machines and CFLs. This report thus examines similarities and critical differences in energy efficiency values, test procedure specifications and other technical performance requirements in existing international programs in order to shed light on where Chinese programs currently stands and considerations for their 2010 programs.« less
7 CFR 1485.16 - Reimbursement rules.
Code of Federal Regulations, 2010 CFR
2010-01-01
... design and production of packaging, labeling or origin identification, to be used during the activity... exceeds locally prevailing levels which the MAP participant shall document by a salary survey or other...) Market research; (17) Evaluations, if not required by CCC to ensure compliance with program requirements...
7 CFR 1485.16 - Reimbursement rules.
Code of Federal Regulations, 2011 CFR
2011-01-01
... design and production of packaging, labeling or origin identification, to be used during the activity... exceeds locally prevailing levels which the MAP participant shall document by a salary survey or other...) Market research; (17) Evaluations, if not required by CCC to ensure compliance with program requirements...
9 CFR 317.1 - Labels required; supervision by Program employee.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Labels required; supervision by... Labels required; supervision by Program employee. (a) When, in an official establishment, any inspected... supervision of a Program employee. ...
9 CFR 317.1 - Labels required; supervision by Program employee.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Labels required; supervision by... Labels required; supervision by Program employee. (a) When, in an official establishment, any inspected... supervision of a Program employee. ...
PROGRAMMED CELL DEATH IN EXTRAOCULAR MUSCLE TENDON/SCLERA PRECURSORS
Abstract
Purpose: This study was designed to examine the occurrence of natural cell death in the periocular mesenchyme of mouse embryos.
Methods: Vital staining with LysoTracker Red and Nile blue sulphate as well as terminal nick end labeling (TUNEL) were utiliz...
Efficient Thread Labeling for Monitoring Programs with Nested Parallelism
NASA Astrophysics Data System (ADS)
Ha, Ok-Kyoon; Kim, Sun-Sook; Jun, Yong-Kee
It is difficult and cumbersome to detect data races occurred in an execution of parallel programs. Any on-the-fly race detection techniques using Lamport's happened-before relation needs a thread labeling scheme for generating unique identifiers which maintain logical concurrency information for the parallel threads. NR labeling is an efficient thread labeling scheme for the fork-join program model with nested parallelism, because its efficiency depends only on the nesting depth for every fork and join operation. This paper presents an improved NR labeling, called e-NR labeling, in which every thread generates its label by inheriting the pointer to its ancestor list from the parent threads or by updating the pointer in a constant amount of time and space. This labeling is more efficient than the NR labeling, because its efficiency does not depend on the nesting depth for every fork and join operation. Some experiments were performed with OpenMP programs having nesting depths of three or four and maximum parallelisms varying from 10,000 to 1,000,000. The results show that e-NR is 5 times faster than NR labeling and 4.3 times faster than OS labeling in the average time for creating and maintaining the thread labels. In average space required for labeling, it is 3.5 times smaller than NR labeling and 3 times smaller than OS labeling.
Improving designer productivity
NASA Technical Reports Server (NTRS)
Hill, Gary C.
1992-01-01
Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting those challenges.
USDA-ARS?s Scientific Manuscript database
Farming opportunities for veterans are a natural fit and capitalize on skills that made them successful in the military. The project is specifically designed to develop comprehensive training and technical assistance programs and enhance market profitability for military veteran farmers. The project...
ProbeDesigner: for the design of probesets for branched DNA (bDNA) signal amplification assays.
Bushnell, S; Budde, J; Catino, T; Cole, J; Derti, A; Kelso, R; Collins, M L; Molino, G; Sheridan, P; Monahan, J; Urdea, M
1999-05-01
The sensitivity and specificity of branched DNA (bDNA) assays are derived in part through the judicious design of the capture and label extender probes. To minimize non-specific hybridization (NSH) events, which elevate assay background, candidate probes must be computer screened for complementarity with generic sequences present in the assay. We present a software application which allows for rapid and flexible design of bDNA probesets for novel targets. It includes an algorithm for estimating the magnitude of NSH contribution to background, a mechanism for removing probes with elevated contributions, a methodology for the simultaneous design of probesets for multiple targets, and a graphical user interface which guides the user through the design steps. The program is available as a commercial package through the Pharmaceutical Drug Discovery program at Chiron Diagnostics.
Proceedings of the 66th National Conference on Weights and Measures, 1981
NASA Astrophysics Data System (ADS)
Wollin, H. F.; Barbrow, L. E.; Heffernan, A. P.
1981-12-01
Major issues discussed included measurement science education, enforcement uniformly, national type approval, inch pound and metric labeling provisions, new design and performance requirements for weighing and measuring technology, metric conversion of retail gasoline dispensers, weights and measures program evaluation studies of model State laws and regulations and their adoption by citation or other means by State and local jurisdictions, and report of States conducting grain moisture meter testing programs.
Optimal design of isotope labeling experiments.
Yang, Hong; Mandy, Dominic E; Libourel, Igor G L
2014-01-01
Stable isotope labeling experiments (ILE) constitute a powerful methodology for estimating metabolic fluxes. An optimal label design for such an experiment is necessary to maximize the precision with which fluxes can be determined. But often, precision gained in the determination of one flux comes at the expense of the precision of other fluxes, and an appropriate label design therefore foremost depends on the question the investigator wants to address. One could liken ILE to shadows that metabolism casts on products. Optimal label design is the placement of the lamp; creating clear shadows for some parts of metabolism and obscuring others.An optimal isotope label design is influenced by: (1) the network structure; (2) the true flux values; (3) the available label measurements; and, (4) commercially available substrates. The first two aspects are dictated by nature and constrain any optimal design. The second two aspects are suitable design parameters. To create an optimal label design, an explicit optimization criterion needs to be formulated. This usually is a property of the flux covariance matrix, which can be augmented by weighting label substrate cost. An optimal design is found by using such a criterion as an objective function for an optimizer. This chapter uses a simple elementary metabolite units (EMU) representation of the TCA cycle to illustrate the process of experimental design of isotope labeled substrates.
Kraken: ultrafast metagenomic sequence classification using exact alignments
2014-01-01
Kraken is an ultrafast and highly accurate program for assigning taxonomic labels to metagenomic DNA sequences. Previous programs designed for this task have been relatively slow and computationally expensive, forcing researchers to use faster abundance estimation programs, which only classify small subsets of metagenomic data. Using exact alignment of k-mers, Kraken achieves classification accuracy comparable to the fastest BLAST program. In its fastest mode, Kraken classifies 100 base pair reads at a rate of over 4.1 million reads per minute, 909 times faster than Megablast and 11 times faster than the abundance estimation program MetaPhlAn. Kraken is available at http://ccb.jhu.edu/software/kraken/. PMID:24580807
Improving designer productivity. [artificial intelligence
NASA Technical Reports Server (NTRS)
Hill, Gary C.
1992-01-01
Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting these challenges.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-25
... proposed color scheme and general design so that the two agencies' labels could work together as a... Programs AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: In two recent actions... Damage d. Addressing Non-English Speakers e. Portable Fuel Containers f. Color, Size, Shape, Font, and...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-18
... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [Doc. No. AMS-FV-11-0015] Child Nutrition... Nutrition Labeling Program. DATES: Comments on this document must be received by July 18, 2011 to be assured... INFORMATION: Title: Child Nutrition Labeling Program. OMB Number: 0581-0261 . Expiration Date of Approval: 3...
The WaterSense Professional Certification Program Labeling System specifies the requirements a professional certifying organization must meet to have the professional certification program labeled under one of the WaterSense program specifications.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Larson, S.M.
This report is divided into six sections, each section dealing with a separate aspect of the program. The six sections are entitled (1) In Vivo Measurement of Amino Acid Transport and Protein Synthesis, (2) Angiogenesis in Human Gliomas: Correlations with Blood Flow and Transport of C-11 AIB, (3) Use of F-18 Fluoropyrimidines for Design and Evaluation of Regional and Systemic Chemotherapeutic Strategies in Human Adenocarcinomas of the Gastrointestinal Tract, (4) Enzymatic Synthesis of Metabolites Labeled with N-13 or C-11, (5) Synthesis of Amino Acids Labeled with C-11, and (6) Instrumentation: Cyclotron and Imaging Systems.
Antúnez, Lucía; Vidal, Leticia; Sapolinski, Alejandra; Giménez, Ana; Maiche, Alejandro; Ares, Gastón
2013-08-01
The aim of this work was to evaluate consumer visual processing of food labels when evaluating the salt content of pan bread labels and to study the influence of label design and nutritional labelling format on consumer attention. A total of 16 pan bread labels, designed according to a full factorial design, were presented to 52 participants, who were asked to decide whether the sodium content of each label was medium or low, while their eye movements were recorded using an eye tracker. Results showed that most participants looked at nutrition labels and the traffic light system to conclude on the salt content of the labels. However, the average percentage of participants who looked at the actual sodium content was much lower. Nutrition information format affected participants' processing of nutrition information. Among other effects, the inclusion of the traffic light system increased participants' attention towards some kind of nutrition information and facilitated its processing, but not its understanding.
Consumer perceptions of specific design characteristics for front-of-package nutrition labels.
Acton, R B; Vanderlee, L; Roberto, C A; Hammond, D
2018-04-01
An increasing number of countries are developing front-of-package (FOP) labels; however, there is limited evidence examining the impact of specific design characteristics for these labels. The current study investigated consumer perceptions of several FOP label design characteristics, including potential differences among sociodemographic sub-groups. Two hundred and thirty-four participants aged 16 years or older completed nine label rating tasks on a laptop at a local shopping mall in Canada. The rating tasks asked participants to rate five primary design characteristics (border, background presence, background colour, 'caution' symbol and government attribution) on their noticeability, readability, believability and likelihood of changing their beverage choice. FOP labels with a border, solid background and contrasting colours increased noticeability. A solid background increased readability, while a contrasting background colour reduced it. Both a 'caution' symbol and a government attribution increased the believability of the labels and the perceived likelihood of influencing beverage choice. The effect of the design characteristics was generally similar across sociodemographic groups, with modest differences in five of the nine outcomes. Label design characteristics, such as the use of a border, colour and symbols can enhance the salience of FOP nutrition labels and may increase the likelihood that FOP labels are used by consumers.
76 FR 3789 - Voluntary Labeling Program for Biobased Products
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-20
... manufacturer or vendor has provided relevant information on the product for the USDA BioPreferred Program Web... labeling component of the BioPreferred Program. The final rule also applies to other entities (e.g., trade... Procurement Program (one part of the BioPreferred\\SM\\ Program) is available on the Internet at http://www...
Arrúa, Alejandra; Curutchet, María Rosa; Rey, Natalia; Barreto, Patricia; Golovchenko, Nadya; Sellanes, Andrea; Velazco, Guillermo; Winokur, Medy; Giménez, Ana; Ares, Gastón
2017-09-01
Research on the relative influence of package features on children's perception of food products is still necessary to aid policy design and development. The aim of the present work was to evaluate the relative influence of two front-of-pack (FOP) nutrition labelling schemes, the traffic light system and Chilean warning system, and label design on children's choice of two popular snack foods in Uruguay, wafer cookies and orange juice. A total of 442 children in grades 4 to 6 from 12 primary schools in Montevideo (Uruguay) participated in the study. They were asked to complete a choice-conjoint task with wafer cookies and orange juice labels, varying in label design and the inclusion of FOP nutrition information. Half of the children completed the task with labels featuring the traffic-light system (n = 217) and the other half with labels featuring the Chilean warning system (n = 225). Children's choices of wafer cookies and juice labels was significantly influenced by both label design and FOP nutritional labels. The relative impact of FOP nutritional labelling on children's choices was higher for the warning system compared to the traffic-light system. Results from the present work stress the need to regulate the design of packages and the inclusion of nutrient claims, and provide preliminary evidence of the potential of warnings to discourage children's choice of unhealthful products. Copyright © 2017 Elsevier Ltd. All rights reserved.
7 CFR Appendix C to Part 220 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 4 2011-01-01 2011-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 220 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM Pt. 220, App. C...
7 CFR Appendix C to Part 210 - Child Nutrition Labeling Program
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 4 2011-01-01 2011-01-01 false Child Nutrition Labeling Program C Appendix C to Part 210 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Pt. 210, App. C Appendix C...
7 CFR Appendix C to Part 220 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2014 CFR
2014-01-01
... 7 Agriculture 4 2014-01-01 2014-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 220 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM Pt. 220, App. C...
7 CFR Appendix C to Part 225 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2012 CFR
2012-01-01
... 7 Agriculture 4 2012-01-01 2012-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 225 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM Pt. 225, App. C...
7 CFR Appendix C to Part 220 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2012 CFR
2012-01-01
... 7 Agriculture 4 2012-01-01 2012-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 220 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM Pt. 220, App. C...
7 CFR Appendix C to Part 210 - Child Nutrition Labeling Program
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 4 2013-01-01 2013-01-01 false Child Nutrition Labeling Program C Appendix C to Part 210 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Pt. 210, App. C Appendix C...
7 CFR Appendix C to Part 225 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 4 2013-01-01 2013-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 225 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM Pt. 225, App. C...
7 CFR Appendix C to Part 210 - Child Nutrition Labeling Program
Code of Federal Regulations, 2014 CFR
2014-01-01
... 7 Agriculture 4 2014-01-01 2014-01-01 false Child Nutrition Labeling Program C Appendix C to Part 210 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Pt. 210, App. C Appendix C...
7 CFR Appendix C to Part 225 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 4 2011-01-01 2011-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 225 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM Pt. 225, App. C...
7 CFR Appendix C to Part 210 - Child Nutrition Labeling Program
Code of Federal Regulations, 2012 CFR
2012-01-01
... 7 Agriculture 4 2012-01-01 2012-01-01 false Child Nutrition Labeling Program C Appendix C to Part 210 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Pt. 210, App. C Appendix C...
7 CFR Appendix C to Part 220 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 4 2013-01-01 2013-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 220 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM Pt. 220, App. C...
7 CFR Appendix C to Part 225 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2014 CFR
2014-01-01
... 7 Agriculture 4 2014-01-01 2014-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 225 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM Pt. 225, App. C...
The Child Nutrition Labeling Program: An Overview.
ERIC Educational Resources Information Center
Wade, Cheryl; And Others
This manual establishes policies and procedures for the Child Nutrition (CN) Labeling Program, a voluntary federal program run by the United States Department of Agriculture. The program is responsible for reviewing a product formulation to determine the contribution a single serving of that product makes toward the child nutrition meal pattern…
What's in a Label? Careers in Integrated Early Childhood Programs.
ERIC Educational Resources Information Center
Gorelick, Molly C.
The paper, given by the director of a project to train teachers for early childhood education programs which integrate handicapped and normal children, focuses on the effects of labeling on teacher-child interaction. The author recounts her own experience with teaching handicapped children and the historical tendency to label and segregate various…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wiel, Stephen; Egan, Christine; della Cava, Mirka
2006-09-01
Governments around the world have increasingly beenimplementing energy efficiency standards and labeling programs for thepast 30 years. There has been an especially rapid growth in the numberand extent of these programs over the past 15 years. By the end of 2005,62 countries had adopted 1818 separate standards or labels covering 82products. The impact has been dramatic. This paper describes: (1) thebenefits that can be obtained through this policy, (2) which countriesare implementing standards and labels and for which products, (3) theimpacts such programs have been having in some countries, and (4) recentprogress through regional cooperation and alignment.
A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment
DOE Office of Scientific and Technical Information (OSTI.GOV)
de la Rue du Can, Stephane; Phadke, Amol; Leventis, Greg
Incentive programs are an essential policy tool to move the market toward energy-efficient products. They offer a favorable complement to mandatory standards and labeling policies by accelerating the market penetration of energy-efficient products above equipment standard requirements and by preparing the market for increased future mandatory requirements. They sway purchase decisions and in some cases production decisions and retail stocking decisions toward energy-efficient products. Incentive programs are structured according to their regulatory environment, the way they are financed, by how the incentive is targeted, and by who administers them. This report categorizes the main elements of incentive programs, using casemore » studies from the Major Economies Forum to illustrate their characteristics. To inform future policy and program design, it seeks to recognize design advantages and disadvantages through a qualitative overview of the variety of programs in use around the globe. Examples range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-Points that reward customers for buying efficient appliances under a government recovery program (Japan). We found that evaluations have demonstrated that financial incentives programs have greater impact when they target highly efficient technologies that have a small market share. We also found that the benefits and drawbacks of different program design aspects depend on the market barriers addressed, the target equipment, and the local market context and that no program design surpasses the others. The key to successful program design and implementation is a thorough understanding of the market and effective identification of the most important local factors hindering the penetration of energy-efficient technologies.« less
7 CFR Appendix C to Part 226 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2012 CFR
2012-01-01
... 7 Agriculture 4 2012-01-01 2012-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 226 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM Pt. 226, App...
7 CFR Appendix C to Part 226 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 4 2013-01-01 2013-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 226 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM Pt. 226, App...
7 CFR Appendix C to Part 226 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 4 2011-01-01 2011-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 226 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM Pt. 226, App...
7 CFR Appendix C to Part 226 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2014 CFR
2014-01-01
... 7 Agriculture 4 2014-01-01 2014-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to Part 226 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM Pt. 226, App...
Haji, Faizal A; Hoppe, Daniel J; Morin, Marie-Paule; Giannoulakis, Konstantine; Koh, Jansen; Rojas, David; Cheung, Jeffrey J H
2014-05-01
Rapid technological advances and concern for patient safety have increased the focus on simulation as a pedagogical tool for educating health care providers. To date, simulation research scholarship has focused on two areas; evaluating instructional designs of simulation programs, and the integration of simulation into a broader educational context. However, these two categories of research currently exist under a single label-Simulation-Based Medical Education. In this paper we argue that introducing a more refined nomenclature within which to frame simulation research is necessary for researchers, to appropriately design research studies and describe their findings, and for end-point users (such as program directors and educators), to more appropriately understand and utilize this evidence.
Label-free functional nucleic acid sensors for detecting target agents
Lu, Yi; Xiang, Yu
2015-01-13
A general methodology to design label-free fluorescent functional nucleic acid sensors using a vacant site approach and an abasic site approach is described. In one example, a method for designing label-free fluorescent functional nucleic acid sensors (e.g., those that include a DNAzyme, aptamer or aptazyme) that have a tunable dynamic range through the introduction of an abasic site (e.g., dSpacer) or a vacant site into the functional nucleic acids. Also provided is a general method for designing label-free fluorescent aptamer sensors based on the regulation of malachite green (MG) fluorescence. A general method for designing label-free fluorescent catalytic and molecular beacons (CAMBs) is also provided. The methods demonstrated here can be used to design many other label-free fluorescent sensors to detect a wide range of analytes. Sensors and methods of using the disclosed sensors are also provided.
Code of Federal Regulations, 2011 CFR
2011-10-01
... this section is to aid potential purchasers in the selection of new passenger motor vehicles by providing them with safety rating information developed by NHTSA in its New Car Assessment Program (NCAP... and rating program. (c) Definitions. (1) Monroney label means the label placed on new automobiles with...
Drug knowledge expressed as computable semantic triples.
Elkin, Peter L; Carter, John S; Nabar, Manasi; Tuttle, Mark; Lincoln, Michael; Brown, Steven H
2011-01-01
The majority of questions that arise in the practice of medicine relate to drug information. Additionally, adverse reactions account for as many as 98,000 deaths per year in the United States. Adverse drug reactions account for a significant portion of those errors. Many authors believe that clinical decision support associated with computerized physician order entry has the potential to decrease this adverse drug event rate. This decision support requires knowledge to drive the process. One important and rich source of drug knowledge is the DailyMed product labels. In this project we used computationally extracted SNOMED CT™ codified data associated with each section of each product label as input to a rules engine that created computable assertional knowledge in the form of semantic triples. These are expressed in the form of "Drug" HasIndication "SNOMED CT™". The information density of drug labels is deep, broad and quite substantial. By providing a computable form of this information content from drug labels we make these important axioms (facts) more accessible to computer programs designed to support improved care.
Referral decisions of teachers and school psychologists for twice-exceptional students
NASA Astrophysics Data System (ADS)
Hoffman, Jennifer Marie
The accurate and timely referral and identification of twice-exceptional students remains a challenge. In a statewide study, the referral decisions for both special education and gifted programming evaluations made by four participant groups (i.e., general education teachers, special education teachers, gifted education teachers, and school psychologists) were compared. Participants were randomly assigned to read one of three identically described students in a vignette that differed only in the presence of a diagnostic label--- autism spectrum disorder (ASD), specific learning disability (SLD), or no diagnostic label. In all, special education teachers made the most special education referrals, while gifted education teachers made the most gifted programming referrals, both regardless of the diagnostic label present. The students with diagnostic labels were recommended for special education referrals significantly more than for gifted programming, while this difference was not evident in the no diagnostic label condition. Moreover, the student with the ASD label was the most likely to be referred for evaluations for both special education and gifted programming out of all three vignette conditions. Overall findings indicated the importance of considering the referral source as well as how the presence of a diagnostic label might influence educational referral decisions, particularly in how this might influence overall multidisciplinary team decisions for these unique learners.
Effect of different children's menu labeling designs on family purchases.
Holmes, Ashley S; Serrano, Elena L; Machin, Jane E; Duetsch, Thomas; Davis, George C
2013-03-01
The majority of labeling studies at restaurants have focused on adults, not children, and utilized cross-sectional data with one menu labeling design, typically calorie information. The aim of this longitudinal study was to examine the effect of three different menu labeling designs for children's meals on total calories and fat selected by families. Each menu was implemented for 2months. Patrons' purchases were tracked from a control menu (with no nutrition information) through all three theoretically-based designs: calorie and fat information; followed by symbols denoting healthier choices; then nutrition bargain price. All menus were created specifically for the study. They featured six combination meals (pre-determined entrees and side items) and a la carte items (entrees and side items that could be ordered separately). Only combination meals contained labeling. Fixed effects models were estimated to detect changes in sales for each menu labeling design compared to the control. Overall, menu labeling did not result in a positive net effect on total calories or fat purchased by families, but resulted in significant shifts in purchases of combination and a la carte meals and healthy and unhealthy options. The most significant impact was seen for nutrition bargain price labeling, the last design. Copyright © 2012 Elsevier Ltd. All rights reserved.
Dieckmann, Peter; Clemmensen, Marianne Hald; Sørensen, Trine Kart; Kunstek, Pina; Hellebek, Annemarie
2016-12-01
Medicine label design plays an important role in improving patient safety. This study aimed at identifying facilitators and barriers in a medicine label system to prevent medication errors in clinical use by health care professionals. The study design is qualitative and exploratory, with a convenience sample of 10 nurses and 10 physicians from different acute care specialties working in hospitals in the Capital Region of Denmark. In 2 patient simulation scenarios and a sorting task, the participants selected the medicines from a range of ampules, vials, and infusion bags. After each scenario and in the end of the study, the participants were interviewed. Notes were validated with the participants, and content was analyzed. The label design benefited from the standardized construction of the labels, the clear layout and font, and some warning signs. The complexity of the system and some inconsistencies (different meaning of colors) posed challenges, when considered with the actual application context, in which there is little time to get familiar with the design features. For optimizing medicine labels and obtaining the full benefit of label design features on patient safety, it is necessary to consider the context in which they are used.
40 CFR 88.305-94 - Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles. 88.305-94 Section 88.305-94 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CLEAN-FUEL VEHICLES Clean-Fuel Fleet Program § 88.305-94 Clean-fuel fleet vehicle labeling...
40 CFR 88.305-94 - Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles. 88.305-94 Section 88.305-94 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CLEAN-FUEL VEHICLES Clean-Fuel Fleet Program § 88.305-94 Clean-fuel fleet vehicle labeling...
40 CFR 88.305-94 - Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles. 88.305-94 Section 88.305-94 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CLEAN-FUEL VEHICLES Clean-Fuel Fleet Program § 88.305-94 Clean-fuel fleet vehicle labeling...
40 CFR 88.305-94 - Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Clean-fuel fleet vehicle labeling requirements for heavy-duty vehicles. 88.305-94 Section 88.305-94 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CLEAN-FUEL VEHICLES Clean-Fuel Fleet Program § 88.305-94 Clean-fuel fleet vehicle labeling...
Less label, more free: approaches in label-free quantitative mass spectrometry.
Neilson, Karlie A; Ali, Naveid A; Muralidharan, Sridevi; Mirzaei, Mehdi; Mariani, Michael; Assadourian, Gariné; Lee, Albert; van Sluyter, Steven C; Haynes, Paul A
2011-02-01
In this review we examine techniques, software, and statistical analyses used in label-free quantitative proteomics studies for area under the curve and spectral counting approaches. Recent advances in the field are discussed in an order that reflects a logical workflow design. Examples of studies that follow this design are presented to highlight the requirement for statistical assessment and further experiments to validate results from label-free quantitation. Limitations of label-free approaches are considered, label-free approaches are compared with labelling techniques, and forward-looking applications for label-free quantitative data are presented. We conclude that label-free quantitative proteomics is a reliable, versatile, and cost-effective alternative to labelled quantitation. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
UNiquant, a program for quantitative proteomics analysis using stable isotope labeling.
Huang, Xin; Tolmachev, Aleksey V; Shen, Yulei; Liu, Miao; Huang, Lin; Zhang, Zhixin; Anderson, Gordon A; Smith, Richard D; Chan, Wing C; Hinrichs, Steven H; Fu, Kai; Ding, Shi-Jian
2011-03-04
Stable isotope labeling (SIL) methods coupled with nanoscale liquid chromatography and high resolution tandem mass spectrometry are increasingly useful for elucidation of the proteome-wide differences between multiple biological samples. Development of more effective programs for the sensitive identification of peptide pairs and accurate measurement of the relative peptide/protein abundance are essential for quantitative proteomic analysis. We developed and evaluated the performance of a new program, termed UNiquant, for analyzing quantitative proteomics data using stable isotope labeling. UNiquant was compared with two other programs, MaxQuant and Mascot Distiller, using SILAC-labeled complex proteome mixtures having either known or unknown heavy/light ratios. For the SILAC-labeled Jeko-1 cell proteome digests with known heavy/light ratios (H/L = 1:1, 1:5, and 1:10), UNiquant quantified a similar number of peptide pairs as MaxQuant for the H/L = 1:1 and 1:5 mixtures. In addition, UNiquant quantified significantly more peptides than MaxQuant and Mascot Distiller in the H/L = 1:10 mixtures. UNiquant accurately measured relative peptide/protein abundance without the need for postmeasurement normalization of peptide ratios, which is required by the other programs.
UNiquant, a Program for Quantitative Proteomics Analysis Using Stable Isotope Labeling
Huang, Xin; Tolmachev, Aleksey V.; Shen, Yulei; Liu, Miao; Huang, Lin; Zhang, Zhixin; Anderson, Gordon A.; Smith, Richard D.; Chan, Wing C.; Hinrichs, Steven H.; Fu, Kai; Ding, Shi-Jian
2011-01-01
Stable isotope labeling (SIL) methods coupled with nanoscale liquid chromatography and high resolution tandem mass spectrometry are increasingly useful for elucidation of the proteome-wide differences between multiple biological samples. Development of more effective programs for the sensitive identification of peptide pairs and accurate measurement of the relative peptide/protein abundance are essential for quantitative proteomic analysis. We developed and evaluated the performance of a new program, termed UNiquant, for analyzing quantitative proteomics data using stable isotope labeling. UNiquant was compared with two other programs, MaxQuant and Mascot Distiller, using SILAC-labeled complex proteome mixtures having either known or unknown heavy/light ratios. For the SILAC-labeled Jeko-1 cell proteome digests with known heavy/light ratios (H/L = 1:1, 1:5, and 1:10), UNiquant quantified a similar number of peptide pairs as MaxQuant for the H/L = 1:1 and 1:5 mixtures. In addition, UNiquant quantified significantly more peptides than MaxQuant and Mascot Distiller in the H/L = 1:10 mixtures. UNiquant accurately measured relative peptide/protein abundance without the need for post-measurement normalization of peptide ratios, which is required by the other programs. PMID:21158445
Matching by linear programming and successive convexification.
Jiang, Hao; Drew, Mark S; Li, Ze-Nian
2007-06-01
We present a novel convex programming scheme to solve matching problems, focusing on the challenging problem of matching in a large search range and with cluttered background. Matching is formulated as metric labeling with L1 regularization terms, for which we propose a novel linear programming relaxation method and an efficient successive convexification implementation. The unique feature of the proposed relaxation scheme is that a much smaller set of basis labels is used to represent the original label space. This greatly reduces the size of the searching space. A successive convexification scheme solves the labeling problem in a coarse to fine manner. Importantly, the original cost function is reconvexified at each stage, in the new focus region only, and the focus region is updated so as to refine the searching result. This makes the method well-suited for large label set matching. Experiments demonstrate successful applications of the proposed matching scheme in object detection, motion estimation, and tracking.
Restaurant menu labeling: impact of nutrition information on entree sales and patron attitudes.
Albright, C L; Flora, J A; Fortmann, S P
1990-01-01
This study examined changes in sales of low fat/low cholesterol foods targeted in a restaurant menu labeling program. Sales of labeled items were tracked before and after the program was introduced, and a subsample of patrons were surveyed for information on visibility and comprehension of the menu labels. Two of the four restaurants had significant increases in the sales of targeted foods following labeling. Comparisons between patrons dining in restaurants which had an increase in sales (I--increase restaurants) to those dining in restaurants which had no overall shift in sales (NI--no increase restaurants) revealed no differences in patron awareness or comprehension of the menu labels. There were age and gender differences between I and NI restaurants, with I restaurants having proportionally more males, and a younger clientele. Taste was the primary reason given by patrons for their entree choice, regardless of whether or not it was labeled. In all four restaurants women and older patrons were more aware of the program and more responsive to its recommendations. These findings suggest that environmental strategies may be an effective method of encouraging dietary changes in the general population, but patron characteristics such as age and gender may influence receptivity to this type of intervention. Future studies aimed at developing effective point of purchase education programs should evaluate these patron characteristics and include more powerful behavior change strategies.
40 CFR 211.104 - Label content.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Label content. 211.104 Section 211.104 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.104 Label content. The following data and information must be on the label of all products for which...
40 CFR 211.104 - Label content.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Label content. 211.104 Section 211.104 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.104 Label content. The following data and information must be on the label of all products for which...
40 CFR 211.104 - Label content.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Label content. 211.104 Section 211.104 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.104 Label content. The following data and information must be on the label of all products for which...
40 CFR 211.104 - Label content.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Label content. 211.104 Section 211.104 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.104 Label content. The following data and information must be on the label of all products for which...
40 CFR 211.104 - Label content.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Label content. 211.104 Section 211.104 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.104 Label content. The following data and information must be on the label of all products for which...
Simplified programming and control of automated radiosynthesizers through unit operations.
Claggett, Shane B; Quinn, Kevin M; Lazari, Mark; Moore, Melissa D; van Dam, R Michael
2013-07-15
Many automated radiosynthesizers for producing positron emission tomography (PET) probes provide a means for the operator to create custom synthesis programs. The programming interfaces are typically designed with the engineer rather than the radiochemist in mind, requiring lengthy programs to be created from sequences of low-level, non-intuitive hardware operations. In some cases, the user is even responsible for adding steps to update the graphical representation of the system. In light of these unnecessarily complex approaches, we have created software to perform radiochemistry on the ELIXYS radiosynthesizer with the goal of being intuitive and easy to use. Radiochemists were consulted, and a wide range of radiosyntheses were analyzed to determine a comprehensive set of basic chemistry unit operations. Based around these operations, we created a software control system with a client-server architecture. In an attempt to maximize flexibility, the client software was designed to run on a variety of portable multi-touch devices. The software was used to create programs for the synthesis of several 18F-labeled probes on the ELIXYS radiosynthesizer, with [18F]FDG detailed here. To gauge the user-friendliness of the software, program lengths were compared to those from other systems. A small sample group with no prior radiosynthesizer experience was tasked with creating and running a simple protocol. The software was successfully used to synthesize several 18F-labeled PET probes, including [18F]FDG, with synthesis times and yields comparable to literature reports. The resulting programs were significantly shorter and easier to debug than programs from other systems. The sample group of naive users created and ran a simple protocol within a couple of hours, revealing a very short learning curve. The client-server architecture provided reliability, enabling continuity of the synthesis run even if the computer running the client software failed. The architecture enabled a single user to control the hardware while others observed the run in progress or created programs for other probes. We developed a novel unit operation-based software interface to control automated radiosynthesizers that reduced the program length and complexity and also exhibited a short learning curve. The client-server architecture provided robustness and flexibility.
Simplified programming and control of automated radiosynthesizers through unit operations
2013-01-01
Background Many automated radiosynthesizers for producing positron emission tomography (PET) probes provide a means for the operator to create custom synthesis programs. The programming interfaces are typically designed with the engineer rather than the radiochemist in mind, requiring lengthy programs to be created from sequences of low-level, non-intuitive hardware operations. In some cases, the user is even responsible for adding steps to update the graphical representation of the system. In light of these unnecessarily complex approaches, we have created software to perform radiochemistry on the ELIXYS radiosynthesizer with the goal of being intuitive and easy to use. Methods Radiochemists were consulted, and a wide range of radiosyntheses were analyzed to determine a comprehensive set of basic chemistry unit operations. Based around these operations, we created a software control system with a client–server architecture. In an attempt to maximize flexibility, the client software was designed to run on a variety of portable multi-touch devices. The software was used to create programs for the synthesis of several 18F-labeled probes on the ELIXYS radiosynthesizer, with [18F]FDG detailed here. To gauge the user-friendliness of the software, program lengths were compared to those from other systems. A small sample group with no prior radiosynthesizer experience was tasked with creating and running a simple protocol. Results The software was successfully used to synthesize several 18F-labeled PET probes, including [18F]FDG, with synthesis times and yields comparable to literature reports. The resulting programs were significantly shorter and easier to debug than programs from other systems. The sample group of naive users created and ran a simple protocol within a couple of hours, revealing a very short learning curve. The client–server architecture provided reliability, enabling continuity of the synthesis run even if the computer running the client software failed. The architecture enabled a single user to control the hardware while others observed the run in progress or created programs for other probes. Conclusions We developed a novel unit operation-based software interface to control automated radiosynthesizers that reduced the program length and complexity and also exhibited a short learning curve. The client–server architecture provided robustness and flexibility. PMID:23855995
Communicating with whom? The effectiveness of appliance energy labels in the U.S. and Thailand
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pont, P. du
The proliferation of household appliances is a global energy problem, and this comparative study of appliance energy labeling in the US and Thailand offers opportunities to learn from the implementation of programs in countries with different income levels and cultural and political climates. In the US, the author conducted participant observation in an appliance store and interviewed 16 policymakers, 14 salespeople, and 100 consumers. In Thailand, he interviewed 11 policymakers, 53 salespeople, and 62 consumers, and carried out a national survey of 971 consumers. This study is the first time that energy labels have been examined primarily as a problemmore » of consumer cognition in context--that is, how consumers read, interpret, and think about energy labels in the retail environment. After just three years of implementation, the Thai appliance labeling program is having a significantly greater impact on the consumer appliance market than is the 20-year-old US program. While Thai salespeople report that more than 60% of consumers ask about or look at the label, the corresponding number for the US is just 20%. Energy efficiency was reported among the top-three purchase priorities by 28% of Thai appliance consumers, compared to just 11% of US consumers. In his in-store tests of label cognition, the US EnergyGuide label fared poorly, and the Thai appliance label was more effective at helping consumers to identify efficient models. Yet both labels suffer from the problem of too much detailed product information, which hinders label comprehension.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-12
..., layout, use of color, use of graphics, and costs associated with designing labels. Panel 1 will address... from the general public about the design of drug and therapeutic biologic container labels, carton... packaging designs. Among these measures, FDA agreed that by the end of FY 2010, after public consultation...
15 CFR 9.5 - Participation of manufacturers.
Code of Federal Regulations, 2010 CFR
2010-01-01
... LABELING PROGRAM FOR HOUSEHOLD APPLIANCES AND EQUIPMENT TO EFFECT ENERGY CONSERVATION § 9.5 Participation... Department of Commerce Labels and Energy Conservation Mark in advertising provided that the entire Label...
Alcohol Warning Label Awareness and Attention: A Multi-method Study.
Pham, Cuong; Rundle-Thiele, Sharyn; Parkinson, Joy; Li, Shanshi
2018-01-01
Evaluation of alcohol warning labels requires careful consideration ensuring that research captures more than awareness given that labels may not be prominent enough to attract attention. This study investigates attention of current in market alcohol warning labels and examines whether attention can be enhanced through theoretically informed design. Attention scores obtained through self-report methods are compared to objective measures (eye-tracking). A multi-method experimental design was used delivering four conditions, namely control, colour, size and colour and size. The first study (n = 559) involved a self-report survey to measure attention. The second study (n = 87) utilized eye-tracking to measure fixation count and duration and time to first fixation. Analysis of Variance (ANOVA) was utilized. Eye-tracking identified that 60% of participants looked at the current in market alcohol warning label while 81% looked at the optimized design (larger and red). In line with observed attention self-reported attention increased for the optimized design. The current study casts doubt on dominant practices (largely self-report), which have been used to evaluate alcohol warning labels. Awareness cannot be used to assess warning label effectiveness in isolation in cases where attention does not occur 100% of the time. Mixed methods permit objective data collection methodologies to be triangulated with surveys to assess warning label effectiveness. Attention should be incorporated as a measure in warning label effectiveness evaluations. Colour and size changes to the existing Australian warning labels aided by theoretically informed design increased attention. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.
Labeling of Pesticide Products under the National Organic Program
This notice describes how registrants can obtain EPA approval of label language indicating that all ingredients in a pesticide product and all uses of that pesticide meet the criteria defined in the USDA National Organic Program Rule.
40 CFR 205.55-4 - Labeling-compliance.
Code of Federal Regulations, 2011 CFR
2011-07-01
... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205.55-4 Labeling... contrasts with the background of the label: (i) The label heading: Vehicle Noise Emission Control...) The statement: This Vehicle Conforms to U.S. EPA Regulations for Noise Emission Applicable to Medium...
40 CFR 211.211 - Compliance with labeling requirement.
Code of Federal Regulations, 2010 CFR
2010-07-01
... ABATEMENT PROGRAMS PRODUCT NOISE LABELING Hearing Protective Devices § 211.211 Compliance with labeling requirement. (a) All hearing protective devices manufactured after the effective date of this regulation, and... comply with the Labeled Values of mean attenuation. (b) A manufacturer must take into account both...
10 CFR 431.30 - Applicability of labeling requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 3 2010-01-01 2010-01-01 false Applicability of labeling requirements. 431.30 Section 431.30 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Electric Motors Labeling § 431.30 Applicability of labeling requirements. The...
Label Design Affects Medication Safety in an Operating Room Crisis: A Controlled Simulation Study.
Estock, Jamie L; Murray, Andrew W; Mizah, Margaret T; Mangione, Michael P; Goode, Joseph S; Eibling, David E
2018-06-01
Several factors contribute to medication errors in clinical practice settings, including the design of medication labels. The objective of this study was to quantify the impact of label design on medication safety in a realistic, high-stress clinical situation. Ninety-six anesthesia trainee participants were randomly assigned to either the redesigned or the current label condition. Participants were blinded to the study's focus on medication label design and their assigned label condition. Each participant was the sole anesthesia provider in a simulated operating room scenario involving an unexpected vascular injury. The surgeon asked the participant to administer hetastarch to the simulated patient because of hemodynamic instability. The fluid drawer of the anesthesia cart contained three 500-ml intravenous bags of hetastarch and one 500-ml intravenous bag of lidocaine. We hypothesized that redesigned labels would help participants correctly select hetastarch from the cart. If the participants incorrectly selected lidocaine from the cart, we hypothesized that the redesigned labels would help participants detect the lidocaine before administration. The percentage of participants who correctly selected hetastarch from the cart was significantly higher for the redesigned labels than the current labels (63% versus 40%; odds ratio, 2.61 [95% confidence interval, 1.1-6.1]; P = 0.03). Of the participants who incorrectly selected lidocaine from the cart, the percentage who detected the lidocaine before administration did not differ by label condition. The redesigned labels helped participants correctly select hetastarch from the cart, thus preventing some potentially catastrophic medication errors from reaching the simulated patient.
User's guide: Programs for processing altimeter data over inland seas
NASA Technical Reports Server (NTRS)
Au, A. Y.; Brown, R. D.; Welker, J. E.
1989-01-01
The programs described were developed to process GEODYN-formatted satellite altimeter data, and to apply the processed results to predict geoid undulations and gravity anomalies of inland sea areas. These programs are written in standard FORTRAN 77 and are designed to run on the NSESCC IBM 3081(MVS) computer. Because of the experimental nature of these programs they are tailored to the geographical area analyzed. The attached program listings are customized for processing the altimeter data over the Black Sea. Users interested in the Caspian Sea data are expected to modify each program, although the required modifications are generally minor. Program control parameters are defined in the programs via PARAMETER statements and/or DATA statements. Other auxiliary parameters, such as labels, are hard-wired into the programs. Large data files are read in or written out through different input or output units. The program listings of these programs are accompanied by sample IBM job control language (JCL) images. Familiarity with IBM JCL and the TEMPLATE graphic package is assumed.
13C metabolic flux analysis: optimal design of isotopic labeling experiments.
Antoniewicz, Maciek R
2013-12-01
Measuring fluxes by 13C metabolic flux analysis (13C-MFA) has become a key activity in chemical and pharmaceutical biotechnology. Optimal design of isotopic labeling experiments is of central importance to 13C-MFA as it determines the precision with which fluxes can be estimated. Traditional methods for selecting isotopic tracers and labeling measurements did not fully utilize the power of 13C-MFA. Recently, new approaches were developed for optimal design of isotopic labeling experiments based on parallel labeling experiments and algorithms for rational selection of tracers. In addition, advanced isotopic labeling measurements were developed based on tandem mass spectrometry. Combined, these approaches can dramatically improve the quality of 13C-MFA results with important applications in metabolic engineering and biotechnology. Copyright © 2013 Elsevier Ltd. All rights reserved.
Pawtucket Heart Health Program Point-of-Purchase Nutrition Education Program in Supermarkets.
ERIC Educational Resources Information Center
Hunt, Mary K.; And Others
1990-01-01
Evaluates a point-of-purchase nutrition education program in Pawtucket (Rhode Island). Uses consumer interviews to evaluate the effect of awareness of shelf labels on purchase behavior. Reports increases in shoppers' ability to identify correct shelf labels and in the number of shoppers who were encouraged to buy the identified foods. (FMW)
9 CFR 317.309 - Nutrition label content.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Nutrition label content. 317.309... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS Nutrition Labeling § 317.309 Nutrition... program qualify for nutrition claims. (3) The declaration of nutrient and food component content shall be...
9 CFR 317.309 - Nutrition label content.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Nutrition label content. 317.309... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS Nutrition Labeling § 317.309 Nutrition... only through a weight-control program qualify for nutrition claims. (3) The declaration of nutrient and...
9 CFR 317.309 - Nutrition label content.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Nutrition label content. 317.309... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS Nutrition Labeling § 317.309 Nutrition... only through a weight-control program qualify for nutrition claims. (3) The declaration of nutrient and...
9 CFR 317.309 - Nutrition label content.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Nutrition label content. 317.309... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS Nutrition Labeling § 317.309 Nutrition... program qualify for nutrition claims. (3) The declaration of nutrient and food component content shall be...
Gentry, Gregory
2009-01-01
Your company has spent months designing a compliance program and training your sales representatives. They know never to mention the off-label uses of your product. If they are asked about the off-label uses by the physician they are detailing, they know to forward those inquiries to the scientific liaisons at headquarters. But, could your company still be in legal jeopardy simply because it knows that the product is being used for an off-label purpose? This article attempts to track the Food and Drug Administration's (FDA's) shifting interpretation of its "intended use" regulations, from focusing entirely on the statements of the manufacturers to focusing on the knowledge of the industry, indeed, of the consumers of products, in determining the true intended use of a product. It will look at several recent attempts by FDA to use that new interpretation of the regulations to expand its power: to regulate tobacco and to require pediatric indications for any new drug. Finally, it will look at several recent examples of how this new interpretation has manifested in actions by FDA and the Department of Justice (DOJ).
Hunter, T B
1994-02-01
Every diagnostic image should be properly labeled. To improve the labeling of radiographs in the Department of Radiology at the University Medical Center, Tucson, Arizona, a special computer program was written to control the printing of the department's film flashcards. This program captures patient data from the hospital's radiology information system and uses it to create a film flashcard that contains the patient's name, hospital number, date of birth, age, the time the patient checked into the radiology department, and the date of the examination. The resulting film labels are legible and aesthetically pleasing. Having the patient's age and date of birth on the labels is a useful quality assurance measure to make certain the proper study has been performed on the correct patient. All diagnostic imaging departments should institute measures to assure their film labeling is as legible and informative as possible.
Rapid tooling for functional prototyping of metal mold processes. CRADA final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zacharia, T.; Ludtka, G.M.; Bjerke, M.A.
1997-12-01
The overall scope of this endeavor was to develop an integrated computer system, running on a network of heterogeneous computers, that would allow the rapid development of tool designs, and then use process models to determine whether the initial tooling would have characteristics which produce the prototype parts. The major thrust of this program for ORNL was the definition of the requirements for the development of the integrated die design system with the functional purpose to link part design, tool design, and component fabrication through a seamless software environment. The principal product would be a system control program that wouldmore » coordinate the various application programs and implement the data transfer so that any networked workstation would be useable. The overall system control architecture was to be required to easily facilitate any changes, upgrades, or replacements of the model from either the manufacturing end or the design criteria standpoint. The initial design of such a program is described in the section labeled ``Control Program Design``. A critical aspect of this research was the design of the system flow chart showing the exact system components and the data to be transferred. All of the major system components would have been configured to ensure data file compatibility and transferability across the Internet. The intent was to use commercially available packages to model the various manufacturing processes for creating the die and die inserts in addition to modeling the processes for which these parts were to be used. In order to meet all of these requirements, investigative research was conducted to determine the system flow features and software components within the various organizations contributing to this project. This research is summarized.« less
Saghatchian, Mahasti; Thonon, Frédérique; Boomsma, Femke; Hummel, Henk; Koot, Bert; Harrison, Chris; Rajan, Abinaya; de Valeriola, Dominique; Otter, Renée; Laranja Pontes, José; Lombardo, Claudio; McGrath, Eoin; Ringborg, Ulrik; Tursz, Thomas; van Harten, Wim
2014-09-01
In order to improve the quality of care in Cancer Centers (CC) and designate Comprehensive Cancer Centers (CCCs), the Organization for European Cancer Institutes (OECI) launched an Accreditation and Designation (A&D) program. The program facilitates the collection of defined data and the assessment of cancer center quality. This study analyzes the results of the first 10 European centers that entered the program. The assessment included 927 items divided across qualitative and quantitative questionnaires. Data collected during self-assessment and peer-review from the 10 first participating centers were combined in a database for comparative analysis using simple statistics. Quantitative and qualitative results were validated by auditors during the peer review visits. Volumes of various functions and activities dedicated to care, research, and education varied widely among centers. There were no significant differences in resources for radiology, radiotherapy, pathologic diagnostic, and surgery. Differences were observed in the use of clinical pathways but not for the practices of holding multidisciplinary team meetings and conforming to guidelines. Regarding human resources, main differences were in the composition and number of supportive care and research staff. All 10 centers applied as CCCs; five obtained the label, and five were designated as CCs. The OECI A&D program allows comparisons between centers with regard to management, research, care, education, and designation as CCs or CCCs. Through the peer review system, recommendations for improvements are given. Assessing the added value of the program, as well as research and patient treatment outcomes, is the next step. Copyright © 2014 by American Society of Clinical Oncology.
7 CFR 205.303 - Packaged products labeled “100 percent organic” or “organic.”
Code of Federal Regulations, 2010 CFR
2010-01-01
..., verifying organic certification of the operations producing such ingredients, and: Provided further, That... (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market Information § 205.303 Packaged products labeled “100 percent organic” or “organic.” (a) Agricultural products...
40 CFR 168.65 - Pesticide export label and labeling requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... toxic pesticides. If the pesticide, device or active ingredient is highly toxic to humans, the skull and... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Pesticide export label and labeling...) PESTICIDE PROGRAMS STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS Export Policy and Procedures for...
40 CFR 168.65 - Pesticide export label and labeling requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... toxic pesticides. If the pesticide, device or active ingredient is highly toxic to humans, the skull and... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Pesticide export label and labeling...) PESTICIDE PROGRAMS STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS Export Policy and Procedures for...
40 CFR 168.65 - Pesticide export label and labeling requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... toxic pesticides. If the pesticide, device or active ingredient is highly toxic to humans, the skull and... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Pesticide export label and labeling...) PESTICIDE PROGRAMS STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS Export Policy and Procedures for...
This PR notice clarifies EPA's intentions regarding the Pesticide Label Improvement Program for Farmworker Safety (PR Notice 83-2) and Pesticide Storage and Disposal Instructions (PR Notice 83-3) issued on March 26, 1983.
76 FR 74723 - New Car Assessment Program (NCAP); Safety Labeling
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-01
... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 575 [Docket No. NHTSA 2010-0025] RIN 2127-AK51 New Car Assessment Program (NCAP); Safety Labeling AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT). ACTION...
40 CFR 82.122 - Certification, recordkeeping, and notice requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... following address: Labeling Program Manager, Stratospheric Protection Division, Office of Atmospheric... (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone... following information: (i) The exact location of documents verifying calendar year 1990 usage and the 95...
40 CFR 82.122 - Certification, recordkeeping, and notice requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... following address: Labeling Program Manager, Stratospheric Protection Division, Office of Atmospheric... (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone... following information: (i) The exact location of documents verifying calendar year 1990 usage and the 95...
40 CFR 82.122 - Certification, recordkeeping, and notice requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... following address: Labeling Program Manager, Stratospheric Protection Division, Office of Atmospheric... (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone... following information: (i) The exact location of documents verifying calendar year 1990 usage and the 95...
Automated extraction of knowledge for model-based diagnostics
NASA Technical Reports Server (NTRS)
Gonzalez, Avelino J.; Myler, Harley R.; Towhidnejad, Massood; Mckenzie, Frederic D.; Kladke, Robin R.
1990-01-01
The concept of accessing computer aided design (CAD) design databases and extracting a process model automatically is investigated as a possible source for the generation of knowledge bases for model-based reasoning systems. The resulting system, referred to as automated knowledge generation (AKG), uses an object-oriented programming structure and constraint techniques as well as internal database of component descriptions to generate a frame-based structure that describes the model. The procedure has been designed to be general enough to be easily coupled to CAD systems that feature a database capable of providing label and connectivity data from the drawn system. The AKG system is capable of defining knowledge bases in formats required by various model-based reasoning tools.
Sansgiry, S S; Cady, P S
1997-01-01
Currently, marketed over-the-counter (OTC) medication labels were simulated and tested in a controlled environment to understand consumer evaluation of OTC label information. Two factors, consumers' age (younger and older adults) and label designs (picture-only, verbal-only, congruent picture-verbal, and noncongruent picture-verbal) were controlled and tested to evaluate consumer information processing. The effects exerted by the independent variables, namely, comprehension of label information (understanding) and product evaluations (satisfaction, certainty, and perceived confusion) were evaluated on the dependent variable purchase intention. Intention measured as purchase recommendation was significantly related to product evaluations and affected by the factor label design. Participants' level of perceived confusion was more important than actual understanding of information on OTC medication labels. A Label Evaluation Process Model was developed which could be used for future testing of OTC medication labels.
PRN 2003-1: Labeling of Pesticide Products under the National Organic Program
This notice describes how registrants can obtain EPA approval of label language indicating that all ingredients (active and inert) in a pesticide product and all uses of that pesticide meet the criteria defined in the USDA's National Organic Program Rule.
Data Programming: Creating Large Training Sets, Quickly.
Ratner, Alexander; De Sa, Christopher; Wu, Sen; Selsam, Daniel; Ré, Christopher
2016-12-01
Large labeled training sets are the critical building blocks of supervised learning methods and are key enablers of deep learning techniques. For some applications, creating labeled training sets is the most time-consuming and expensive part of applying machine learning. We therefore propose a paradigm for the programmatic creation of training sets called data programming in which users express weak supervision strategies or domain heuristics as labeling functions , which are programs that label subsets of the data, but that are noisy and may conflict. We show that by explicitly representing this training set labeling process as a generative model, we can "denoise" the generated training set, and establish theoretically that we can recover the parameters of these generative models in a handful of settings. We then show how to modify a discriminative loss function to make it noise-aware, and demonstrate our method over a range of discriminative models including logistic regression and LSTMs. Experimentally, on the 2014 TAC-KBP Slot Filling challenge, we show that data programming would have led to a new winning score, and also show that applying data programming to an LSTM model leads to a TAC-KBP score almost 6 F1 points over a state-of-the-art LSTM baseline (and into second place in the competition). Additionally, in initial user studies we observed that data programming may be an easier way for non-experts to create machine learning models when training data is limited or unavailable.
Data Programming: Creating Large Training Sets, Quickly
Ratner, Alexander; De Sa, Christopher; Wu, Sen; Selsam, Daniel; Ré, Christopher
2018-01-01
Large labeled training sets are the critical building blocks of supervised learning methods and are key enablers of deep learning techniques. For some applications, creating labeled training sets is the most time-consuming and expensive part of applying machine learning. We therefore propose a paradigm for the programmatic creation of training sets called data programming in which users express weak supervision strategies or domain heuristics as labeling functions, which are programs that label subsets of the data, but that are noisy and may conflict. We show that by explicitly representing this training set labeling process as a generative model, we can “denoise” the generated training set, and establish theoretically that we can recover the parameters of these generative models in a handful of settings. We then show how to modify a discriminative loss function to make it noise-aware, and demonstrate our method over a range of discriminative models including logistic regression and LSTMs. Experimentally, on the 2014 TAC-KBP Slot Filling challenge, we show that data programming would have led to a new winning score, and also show that applying data programming to an LSTM model leads to a TAC-KBP score almost 6 F1 points over a state-of-the-art LSTM baseline (and into second place in the competition). Additionally, in initial user studies we observed that data programming may be an easier way for non-experts to create machine learning models when training data is limited or unavailable. PMID:29872252
16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.
Code of Federal Regulations, 2010 CFR
2010-01-01
..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...
16 CFR § 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.
Code of Federal Regulations, 2013 CFR
2013-01-01
..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...
16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.
Code of Federal Regulations, 2012 CFR
2012-01-01
..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...
16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.
Code of Federal Regulations, 2011 CFR
2011-01-01
..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...
16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.
Code of Federal Regulations, 2014 CFR
2014-01-01
..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...
Feasibility of an appliance energy testing and labeling program for Sri Lanka
DOE Office of Scientific and Technical Information (OSTI.GOV)
Biermayer, Peter; Busch, John; Hakim, Sajid
2000-04-01
A feasibility study evaluated the costs and benefits of establishing a program for testing, labeling and setting minimum efficiency standards for appliances and lighting in Sri Lanka. The feasibility study included: refrigerators, air-conditioners, flourescent lighting (ballasts & CFls), ceiling fans, motors, and televisions.
NASA Technical Reports Server (NTRS)
Bechtel, R. D.; Mateos, M. A.; Lincoln, K. A.
1988-01-01
Briefly described are the essential features of a computer program designed to interface a personal computer with the fast, digital data acquisition system of a time-of-flight mass spectrometer. The instrumentation was developed to provide a time-resolved analysis of individual vapor pulses produced by the incidence of a pulsed laser beam on an ablative material. The high repetition rate spectrometer coupled to a fast transient recorder captures complete mass spectra every 20 to 35 microsecs, thereby providing the time resolution needed for the study of this sort of transient event. The program enables the computer to record the large amount of data generated by the system in short time intervals, and it provides the operator the immediate option of presenting the spectral data in several different formats. Furthermore, the system does this with a high degree of automation, including the tasks of mass labeling the spectra and logging pertinent instrumental parameters.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou, Nan
2008-03-01
China first adopted minimum energy performance standards (MEPS) in 1989. Today, there are standards for a wide range of domestic, commercial and selected industrial equipment. In 1999, China launched a voluntary endorsement label, which has grown to cover over 40 products including water-saving products (See Figure 1). Further, in 2005, China started a mandatory energy information label (also referred to as the 'Energy Label'). Today, the Energy Label is applied to four products including: air conditioners; household refrigerators; clothes washers; and unitary air conditioners (See Figure 2). MEPS and the voluntary endorsement labeling specifications have been updated and revised inmore » order to reflect technology improvements to those products in the market. These programs have had an important impact in reducing energy consumption of appliances in China. Indeed, China has built up a strong infrastructure to develop and implement product standards. Historically, however, the government's primary focus has been on the technical requirements for efficiency performance. Less attention has been paid to monitoring and enforcement with a minimal commitment of resources and little expansion of administrative capacity in this area. Thus, market compliance with both mandatory standards and labeling programs has been questionable and actual energy savings may have been undermined as a result. The establishment of a regularized monitoring system for tracking compliance with the mandatory standard and energy information label in China is a major area for program improvement. Over the years, the Collaborative Labeling and Appliance Standards Program (CLASP) has partnered with several Chinese institutions to promote energy-efficient products in China. CLASP, together with its implementing partner Lawrence Berkeley National Laboratory (LBNL), has assisted China in developing and updating the above-mentioned standards and labeling programs. Because of the increasing need for the development of a monitoring system to track compliance with standards and labeling, CLASP, with support from Japan's Ministry of Economy, Trade and Industry (METI), has expanded its ongoing collaboration with the China National Institute of Standards (CNIS) to include enforcement and monitoring. CNIS has already begun working on the issue of compliance. CNIS has conducted modest sample testing in 2006 for refrigerators, freezers and room air-conditioners, and repeated the same task in 2007 with a similar sample size for three products (refrigerators, freezers, air-conditioners and clothes washers). And, CNIS, with technical support from LBNL, has analyzed the data collected through testing. At the same time, parallel effort has also been paid to look at the potential impact of the label to 2020. In conjunction with CNIS, CLASP technical experts reviewed the standards development timeline of the four products currently subject to the mandatory energy information label. CLASP, with the support of METI/IEEJ, collaborated with CNIS to develop the efficiency grades, providing: technical input to the process; comment and advice on particular technical issues; as well as evaluation of the results. In addition, in order to effectively evaluate the impact of the label on China's market, CLASP further provided assistance to CNIS to collect data on both the efficiency distribution and product volume distribution of refrigerators on the market. This short report summarizes the status of Standards and Labeling program, current enforcement and monitoring mechanism in China, and states the importance of international collaborations.« less
Bridging child welfare and juvenile justice: preventing unnecessary detention of foster children.
Ross, Timothy; Conger, Dylan; Armstrong, Molly
2002-01-01
Gaps in service coordination between child welfare and other child-serving agencies are well documented. This article examines the gap between the child welfare and juvenile justice systems and discusses a program, Project Confirm, designed to reduce the problems associated with this gap. Project Confirm aims to improve cooperation between juvenile justice and child welfare agencies to prevent the unnecessary detention of arrested foster children in secure facilities. The program's design is outlined, and implementation statistics and government partner perceptions of the program in its first year of operations are provided. The article also identifies future challenges to implementation and discusses the broader implications of the program. In making this appeal for coordination and collaboration among public agencies, I'm not talking about pro forma integration efforts-I'm not talking about memoranda of understanding or top-level reorganizations that have autonomous agencies vaguely reporting to a single box labeled "human services." Rather, I'm talking about the much more challenging objective of achieving real working partnerships at the front line. (Nelson, 1998, p. 6)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou, Nan; Zheng, Nina; Fridley, David
2012-02-28
Appliance energy efficiency standards and labeling (S&L) programs have been important policy tools for regulating the efficiency of energy-using products for over 40 years and continue to expand in terms of geographic and product coverage. The most common S&L programs include mandatory minimum energy performance standards (MEPS) that seek to push the market for efficient products, and energy information and endorsement labels that seek to pull the market. This study seeks to review and compare some of the earliest and most well-developed S&L programs in three countries and one region: the U.S. MEPS and ENERGY STAR, Australia MEPS and Energymore » Label, European Union MEPS and Ecodesign requirements and Energy Label and Japanese Top Runner programs. For each program, key elements of S&L programs are evaluated and comparative analyses across the programs undertaken to identify best practice examples of individual elements as well as cross-cutting factors for success and lessons learned in international S&L program development and implementation. The international review and comparative analysis identified several overarching themes and highlighted some common factors behind successful program elements. First, standard-setting and programmatic implementation can benefit significantly from a legal framework that stipulates a specific timeline or schedule for standard-setting and revision, product coverage and legal sanctions for non-compliance. Second, the different MEPS programs revealed similarities in targeting efficiency gains that are technically feasible and economically justified as the principle for choosing a standard level, in many cases at a level that no product on the current market could reach. Third, detailed survey data such as the U.S. Residential Energy Consumption Survey (RECS) and rigorous analyses provide a strong foundation for standard-setting while incorporating the participation of different groups of stakeholders further strengthen the process. Fourth, sufficient program resources for program implementation and evaluation are critical to the effectiveness of standards and labeling programs and cost-sharing between national and local governments can help ensure adequate resources and uniform implementation. Lastly, check-testing and punitive measures are important forms of enforcement while the cancellation of registration or product sales-based fines have also proven effective in reducing non-compliance. The international comparative analysis also revealed the differing degree to which the level of government decentralization has influenced S&L programs and while no single country has best practices in all elements of standards and labeling development and implementation, national examples of best practices for specific elements do exist. For example, the U.S. has exemplified the use of rigorous analyses for standard-setting and robust data source with the RECS database while Japan's Top Runner standard-setting principle has motivated manufacturers to exceed targets. In terms of standards implementation and enforcement, Australia has demonstrated success with enforcement given its long history of check-testing and enforcement initiatives while mandatory information-sharing between EU jurisdictions on compliance results is another important enforcement mechanism. These examples show that it is important to evaluate not only the drivers of different paths of standards and labeling development, but also the country-specific context for best practice examples in order to understand how and why certain elements of specific S&L programs have been effective.« less
Using Distance Education to Teach the New Food Label to Extension Educators.
ERIC Educational Resources Information Center
Struempler, Barbara; And Others
1997-01-01
Satellite training about the new national food labeling system was provided to 97 Alabama extension agents and 67 program assistants. The program, which consisted of a 30-minute video and 25-minute question/answer call-in, proved an effective means of distance education. (SK)
15 CFR 16.2 - Description and goal of program.
Code of Federal Regulations, 2011 CFR
2011-01-01
... performance characteristics in CPILP labels if, by doing so, product comparison at the point of sale is... Voluntary Consumer Product Information Labeling Program makes available to consumers, at the point of sale, information on consumer product performance in an understandable and useful form so as to facilitate accurate...
21 CFR 130.11 - Label designations of ingredients for standardized foods.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Label designations of ingredients for standardized foods. 130.11 Section 130.11 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD STANDARDS: GENERAL General Provisions § 130.11 Label...
21 CFR 130.11 - Label designations of ingredients for standardized foods.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Label designations of ingredients for standardized foods. 130.11 Section 130.11 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD STANDARDS: GENERAL General Provisions § 130.11 Label...
PRN 83-3: Label Improvement Program - Storage and Disposal Label Statements
This Notice is to inform all registrants that the label of all pesticide products must include updated storage and disposal statements. No application for amended registration is required if you use the exact wording contained in this Notice.
Automatic prevention of label overlap
DOT National Transportation Integrated Search
1976-03-01
The project comprised a number of simulation exercises : designed to evaluate methods of either preventing or : resolving the problems likely to be caused by label overlap on : Labelled Plan Displays (LPD). The automatic prevention of : label overlap...
A Simple Picaxe Microcontroller Pulse Source for Juxtacellular Neuronal Labelling.
Verberne, Anthony J M
2016-10-19
Juxtacellular neuronal labelling is a method which allows neurophysiologists to fill physiologically-identified neurons with small positively-charged marker molecules. Labelled neurons are identified by histochemical processing of brain sections along with immunohistochemical identification of neuropeptides, neurotransmitters, neurotransmitter transporters or biosynthetic enzymes. A microcontroller-based pulser circuit and associated BASIC software script is described for incorporation into the design of a commercially-available intracellular electrometer for use in juxtacellular neuronal labelling. Printed circuit board construction has been used for reliability and reproducibility. The current design obviates the need for a separate digital pulse source and simplifies the juxtacellular neuronal labelling procedure.
Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India
DOE Office of Scientific and Technical Information (OSTI.GOV)
Abhyankar, Nikit; Shah, Nihar; Phadke, Amol
Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALAmore » light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.« less
N-Sulfonyl-β-lactam hapten as an effective labeling reagent for aldolase mAb.
Inokuma, Tsubasa; Fuller, Roberta P; Barbas, Carlos F
2015-04-15
Utilization of chemically programmed antibodies (cpAbs) is regarded to be one of the most efficient methods for the development of therapeutic systems. cpAbs can extend the half-life of programming reagents, activate immune systems via the Fc region of antibodies and achieve universal vaccination by attaching varieties of small, programmed molecules. In the current study, we aimed to develop a novel labeling reagent for the preparation of cpAbs and found that N-sulfonyl-β-lactams (NSBLs) were optimal. NSBL can be synthesized from readily available 4-(bromomethyl)benzenesulfonyl chloride via few simple manipulations and can label the aldolase monoclonal antibody (mAb) 84G3, which could not be labeled effectively by the conventional labeling reagent, N-acyl-β-lactam (NABL). We also demonstrated that the conjugate, which consists of mAb 84G3 and an NSBL bearing a biotin moiety, maintained strong binding activity to streptavidin. In addition, the stability assay of NSBL revealed that NSBLs can tolerate aqueous media without significant decomposition over 24h. Copyright © 2015 Elsevier Ltd. All rights reserved.
Nanney, Marilyn S; Glatt, Carissa
2012-01-01
Objective The aim of the present study was to explore the implementation of nutrition recommendations made in the 2010 Institute of Medicine (IOM) report, Child and Adult Care Food Program: Aligning Dietary Guidance for All, in school-based after-school snack programmes. Design A descriptive study. Setting One large suburban school district in Minneapolis, Minnesota, USA. Subjects None. Results Major challenges to implementation included limited access to product labelling and specifications inconsistent with the IOM’s Child and Adult Care Food Program (CACFP) recommendations, limited access to healthier foods due to current school district buying consortium agreement, and increased costs of wholegrain and lower-sodium foods and pre-packaged fruits and vegetables. Conclusions Opportunities for government and industry policy development and partnerships to support schools in their efforts to promote healthy after-school food environments remain. Several federal, state and industry leadership opportunities are proposed: provide product labelling that makes identifying snacks which comply with the 2010 IOM CACFP recommended standards easy; encourage compliance with recommendations by providing incentives to programmes; prioritize the implementation of paperwork and technology that simplifies enrolment and accountability systems; and provide support for food safety training and/or certification for non-food service personnel. PMID:22050891
40 CFR 85.1411 - Labeling requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Labeling requirements. 85.1411 Section 85.1411 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Urban Bus Rebuild Requirements § 85.1411 Labeling...
Anglin, Deidre M; Greenspoon, Michelle I; Lighty, Quenesha; Corcoran, Cheryl M; Yang, Lawrence H
2014-08-01
The public health benefits of utilizing an 'at-risk for psychosis' designation are tempered by concerns about stigma. It is therefore of interest to examine whether symptoms associated with this designation might spontaneously induce labels associated with a psychotic disorder, other non-psychotic disorders or non-psychiatric labels. This pilot study explored the labels associated with characteristics of 'high risk for psychosis' and the corresponding stigma level. A vignette describing an identical character, followed by a series of questions about stigmatizing attitudes towards the vignette character, was administered in the present investigation. The results indicated that even though most young people (59%) did not spontaneously label the vignette character with psychotic-like diagnostic labels, the single most frequent label provided was 'paranoid/a'. When such labelling, that is, strongly tied to psychosis, occurred, respondents exhibited stronger stigmatizing attributions of fear compared to those indicating non-psychiatric labels (e.g. 'weird'). These results suggest that the majority of respondents did not endorse diagnostic labels spontaneously, thus signaling that stigma in the majority of cases would not naturalistically be elicited. However, a segment of respondents evidenced stigma simply from behavioural changes manifested by individuals exhibiting signs of psychosis, independent of diagnosis. Implications for reducing any stigma associated with an 'at-risk for psychosis' designation are discussed. © 2013 Wiley Publishing Asia Pty Ltd.
40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual
Code of Federal Regulations, 2014 CFR
2014-07-01
... various label types that may apply. 2.2 Certified Wood Heaters The design and content of certified wood... three variables listed above. Figures 1 and 2 illustrate the variations in label design. Figure 1 is a... general layout, the type font and type size illustrated in Figures 1 and 2. 2.2.1 Identification and...
40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual
Code of Federal Regulations, 2012 CFR
2012-07-01
... various label types that may apply. 2.2 Certified Wood Heaters The design and content of certified wood... three variables listed above. Figures 1 and 2 illustrate the variations in label design. Figure 1 is a... general layout, the type font and type size illustrated in Figures 1 and 2. 2.2.1Identification and...
40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual
Code of Federal Regulations, 2013 CFR
2013-07-01
... various label types that may apply. 2.2 Certified Wood Heaters The design and content of certified wood... three variables listed above. Figures 1 and 2 illustrate the variations in label design. Figure 1 is a... general layout, the type font and type size illustrated in Figures 1 and 2. 2.2.1Identification and...
Bix, Laura; Seo, Do Chan; Ladoni, Moslem; Brunk, Eric; Becker, Mark W
2016-01-01
Effective standardization of medical device labels requires objective study of varied designs. Insufficient empirical evidence exists regarding how practitioners utilize and view labeling. Measure the effect of graphic elements (boxing information, grouping information, symbol use and color-coding) to optimize a label for comparison with those typical of commercial medical devices. Participants viewed 54 trials on a computer screen. Trials were comprised of two labels that were identical with regard to graphics, but differed in one aspect of information (e.g., one had latex, the other did not). Participants were instructed to select the label along a given criteria (e.g., latex containing) as quickly as possible. Dependent variables were binary (correct selection) and continuous (time to correct selection). Eighty-nine healthcare professionals were recruited at Association of Surgical Technologists (AST) conferences, and using a targeted e-mail of AST members. Symbol presence, color coding and grouping critical pieces of information all significantly improved selection rates and sped time to correct selection (α = 0.05). Conversely, when critical information was graphically boxed, probability of correct selection and time to selection were impaired (α = 0.05). Subsequently, responses from trials containing optimal treatments (color coded, critical information grouped with symbols) were compared to two labels created based on a review of those commercially available. Optimal labels yielded a significant positive benefit regarding the probability of correct choice ((P<0.0001) LSM; UCL, LCL: 97.3%; 98.4%, 95.5%)), as compared to the two labels we created based on commercial designs (92.0%; 94.7%, 87.9% and 89.8%; 93.0%, 85.3%) and time to selection. Our study provides data regarding design factors, namely: color coding, symbol use and grouping of critical information that can be used to significantly enhance the performance of medical device labels.
Berlin, Robert J
2009-09-01
I examined the relationship between the Food and Drug Administration's (FDA's) use of special regulatory designations and the frequency with which labels of oncology drugs are revised to explore how the FDA's designation of products relates to product development and refinement. One hundred oncology drugs, designated by the FDA as accelerated approval, priority review, orphan drug, or traditional review, were identified from publicly available information. Drug information for each product was evaluated to assess the rate at which manufacturers revised product labeling. Rates were compared between specially categorized products and traditional review products (e.g., orphan vs nonorphan drugs) to produce revision rate ratios for each special category. Labeling for accelerated approval and priority review products are revised significantly more frequently than are labels for traditional products. Accelerated approval products are approved based on surrogate endpoints; this approval process anticipates subsequent labeling refinement. Priority review products, however, are approved through a process that is ostensibly as rigorous as traditional review. Their higher than expected label revision rate may suggest deficiencies in the FDA's current priority review evaluation processes.
15 CFR 16.6 - Establishment of fees and charges.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Establishment of fees and charges. 16... VOLUNTARY CONSUMER PRODUCT INFORMATION LABELING PROGRAM § 16.6 Establishment of fees and charges. (a) The... program, shall establish fees and charges for use of the Department of Commerce Label and Mark on each...
NASA Astrophysics Data System (ADS)
Soong, J.; Stewart, C.; Reuss, D.; Pinney, C.; Cotrufo, F. M.
2010-12-01
The use of stable isotope enriched plant material can provide an unobstructed method of studying ecosystem nutrient dynamics between plants, soil, and atmosphere. However, the production of uniformly labeled perennial plant material is challenging due to plant physiological constraints and the mechanics of building and operating an isotope labeling system. In this study we present the design of a novel dual 13C and 15N continuous isotope labeling chamber located at Colorado State University. The chamber is equipped with automatic controls for CO2 concentration, temperature, and humidity, and has successfully been used to grow and label the tallgrass perennial Andropogon gerardii in pots from rhizomes. Three different nitrogen fertilization levels were applied to assess how substrate availability may alter growth and overall performance in the system. The efficiency of the 13C and 15N labeling chamber, its design and overall performance, as well as a full C, N, 13C, and 15N budget of the aboveground biomass, belowground biomass, and soil will be presented. Solid samples were analyzed on an EA-IRMS, while air samples from the chamber were analyzed using a precon-GC-IRMS system. The dual stable isotope labeled A. gerardii produced from this chamber will be used in a decomposition experiment to quantify the relative contribution of aboveground litter derived C to soil respiration, dissolved organic carbon, and various soil organic matter pools. Based on the results of our A. gerardii 13C and 15N labeling experiment we believe that this chamber design can be used to successfully produce dual stable isotope labeled plants for a wide variety of terrestrial nutrient flux experiments.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., or association that designs, manufactures, assembles, or controls the assembly of an electrical... attachment of an approval plate so indicating. Approval plate means a metal plate, the design of which meets... approved (permissible) equipment. Certification label means a plate, label, or marking, the design of which...
Code of Federal Regulations, 2013 CFR
2013-07-01
..., or association that designs, manufactures, assembles, or controls the assembly of an electrical... attachment of an approval plate so indicating. Approval plate means a metal plate, the design of which meets... approved (permissible) equipment. Certification label means a plate, label, or marking, the design of which...
Code of Federal Regulations, 2011 CFR
2011-07-01
..., or association that designs, manufactures, assembles, or controls the assembly of an electrical... attachment of an approval plate so indicating. Approval plate means a metal plate, the design of which meets... approved (permissible) equipment. Certification label means a plate, label, or marking, the design of which...
Code of Federal Regulations, 2012 CFR
2012-07-01
..., or association that designs, manufactures, assembles, or controls the assembly of an electrical... attachment of an approval plate so indicating. Approval plate means a metal plate, the design of which meets... approved (permissible) equipment. Certification label means a plate, label, or marking, the design of which...
75 FR 51058 - Web-Distributed Labeling User Acceptance Pilot
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-18
... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2010-0632; FRL-8840-1] Web-Distributed Labeling User... Pesticide Programs (OPP) is exploring a new initiative called ``web-distributed labeling'' (web-distributed... Internet. Through this Federal Register Notice, OPP is announcing its intention to conduct a web...
9 CFR 381.409 - Nutrition label content.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Nutrition label content. 381.409... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.409 Nutrition... that are available only through a weight-control program qualify for nutrition claims. (3) The...
9 CFR 381.409 - Nutrition label content.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Nutrition label content. 381.409... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.409 Nutrition... that are available only through a weight-control program qualify for nutrition claims. (3) The...
A Simple Picaxe Microcontroller Pulse Source for Juxtacellular Neuronal Labelling †
Verberne, Anthony J. M.
2016-01-01
Juxtacellular neuronal labelling is a method which allows neurophysiologists to fill physiologically-identified neurons with small positively-charged marker molecules. Labelled neurons are identified by histochemical processing of brain sections along with immunohistochemical identification of neuropeptides, neurotransmitters, neurotransmitter transporters or biosynthetic enzymes. A microcontroller-based pulser circuit and associated BASIC software script is described for incorporation into the design of a commercially-available intracellular electrometer for use in juxtacellular neuronal labelling. Printed circuit board construction has been used for reliability and reproducibility. The current design obviates the need for a separate digital pulse source and simplifies the juxtacellular neuronal labelling procedure. PMID:28952589
THE EFFECT OF SELECTED SPATIAL DESIGN FACTORS IN EDUCATIONAL DISPLAYS ON LEARNING AND RETENTION.
ERIC Educational Resources Information Center
ROCKETT, AGNES M.; SAUL, EZRA V.
CRITERIA WERE DEVELOPED FOR THE DESIGN OF LABELS IN VERBAL-PICTORIAL EDUCATIONAL DISPLAYS. THE INFLUENCE OF SPATIAL DISTRIBUTION OF LABELS ON EASE OF LEARNING AND DEGREE OF RETENTION WAS INVESTIGATED. THIRTY ANATOMICAL PARTS OF THE HUMAN DIGESTIVE TRACT WERE LABELED ON 10 CHARTS SHOWING THE SAME DIAGRAM OF THE HUMAN BODY, BUT WITH DIFFERENT…
Influence of Label Design on Children's Perception of 2 Snack Foods.
Arrúa, Alejandra; Vidal, Leticia; Antúnez, Lucía; Machín, Leandro; Martínez, Joseline; Curutchet, María Rosa; Giménez, Ana; Ares, Gastón
2017-03-01
To evaluate the influence of label design on children's perception of 2 popular snack foods across 3 income levels. Labels of 2 snack products (yogurt and sponge cake) were designed using a fractional factorial design with 3 2-level variables: cartoon character, nutrition claims, and front-of-package nutritional information. A total of 221 children (aged 9-13 years) from Montevideo, Uruguay, with different income levels, participated in the study. Children's attitude toward and liking of 2 food products. Low-income children showed a more positive attitude toward the products than did middle- and high-income children. The inclusion of a cartoon character in sponge cake labels significantly affected hedonic expectations regardless of income. Middle- and high-income children tended to use the term funny more frequently and the term boring less frequently to describe labels that included the cartoon character, compared with those that did not. Results showed that the inclusion of cartoon characters on food labels is associated with fun. Low-income children seem more susceptible to the marketing strategies of food companies than do middle- and high-income children. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.
40 CFR 82.110 - Form of label bearing warning statement.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Form of label bearing warning statement. 82.110 Section 82.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone-Depleting...
40 CFR 82.112 - Removal of label bearing warning statement.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Removal of label bearing warning statement. 82.112 Section 82.112 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone-Depleting...
9 CFR 381.409 - Nutrition label content.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Nutrition label content. 381.409... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.409 Nutrition... program qualify for nutrition claims. (3) The declaration of nutrient and food component content shall be...
9 CFR 381.409 - Nutrition label content.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Nutrition label content. 381.409... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.409 Nutrition... program qualify for nutrition claims. (3) The declaration of nutrient and food component content shall be...
40 CFR 205.55-5 - Labeling-exterior. [Reserved
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Labeling-exterior. [Reserved] 205.55-5 Section 205.55-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205.55-5 Labeling...
77 FR 75400 - Labeling Requirements for Commercial and Industrial Equipment
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-20
.... EERE-2012-BT-NOA-0037] RIN 1904-AC84 Labeling Requirements for Commercial and Industrial Equipment... standards for certain commercial and industrial equipment, and requires the Department of Energy (DOE) to administer an energy conservation program for the equipment, including the development of labeling...
Code of Federal Regulations, 2010 CFR
2010-04-01
... under the HUD building product standards and certification program for carpet. 200.945 Section 200.945... requirements under the HUD building product standards and certification program for carpet. (a) Applicable.... (b) Labeling. Under the procedures set forth in § 200.935(d)(6) concerning labeling of a product, the...
Lassen, A D; Beck, A; Leedo, E; Andersen, E W; Christensen, T; Mejborn, H; Thorsen, A V; Tetens, I
2014-04-01
Healthier meal selections at restaurants and canteens are often limited and not actively promoted. In this Danish study the effectiveness of a healthy labelling certification program in improving dietary intake and influencing edible plate waste was evaluated in a quasi-experimental study design. Employees from an intervention worksite canteen and a matched control canteen were included in the study at baseline (February 2012), after completing the certification process (end-point) and six month from end-point (follow-up) (total n=270). In order to estimate nutrient composition of the consumed lunch meals and plate waste a validated digital photographic method was used combining estimation of food intake with food nutrient composition data. Food satisfaction was rated by participants using a questionnaire. Several significant positive nutritional effects were observed at the intervention canteen including a mean decrease in energy density in the consumed meals from 561kJ/100g at baseline to 368 and 407kJ/100g at end-point and follow-up, respectively (P<0.001). No significant changes were seen with regard to food satisfaction and plate waste. In the control canteen no positive nutritional effects were observed. The results of the study highlight the potential of using healthy labelling certification programs as a possible driver for increasing both the availability and awareness of healthy meal choices, thereby improving dietary intake when eating out. Copyright © 2013 Elsevier Ltd. All rights reserved.
Biederman, Joseph; Petty, Carter R; Woodworth, K Yvonne; Lomedico, Alexandra; O'Connor, Katherine B; Wozniak, Janet; Faraone, Stephen V
2012-03-01
To examine the informativeness of open-label trials toward predicting results in subsequent randomized, placebo-controlled clinical trials of psychopharmacologic treatments for pediatric bipolar disorder. We searched journal articles through PubMed at the National Library of Medicine using bipolar disorder, mania, pharmacotherapy, treatment and clinical trial as keywords. This search was supplemented with scientific presentations at national and international scientific meetings and submitted manuscripts from our group. Selection criteria included (1) enrollment of children diagnosed with DSM-IV bipolar disorder; (2) prospective assessment of at least 3 weeks; (3) monotherapy of a pharmacologic treatment for bipolar disorder; (4) use of a randomized placebo-controlled design or an open-label design for the same therapeutic compound; and (5) repeated use of the Young Mania Rating Scale (YMRS) as an outcome. The following information and data were extracted from 14 studies: study design, name of medication, class of medication, dose of medication, sample size, age, sex, trial length, and YMRS mean and standard deviation baseline and follow-up scores. For both study designs, the pooled effect size was statistically significant (open-label studies, z = 8.88, P < .001; randomized placebo-controlled studies, z = 13.75, P < .001), indicating a reduction in the YMRS from baseline to endpoint in both study designs. In a meta-analysis regression, study design was not a significant predictor of mean change in the YMRS. We found similarities in the treatment effects between open-label and randomized placebo-controlled studies in youth with bipolar disorder indicating that open-label studies are useful predictors of the potential safety and efficacy of a given compound in the treatment of pediatric bipolar disorder. © Copyright 2012 Physicians Postgraduate Press, Inc.
Audit Report on "The Department's Management of the ENERGY STAR Program"
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
2009-10-01
The American Recovery and Reinvestment Act (Recovery Act) authorized about $300 million in consumer rebate incentives for purchases of products rated under the 'ENERGY STAR' Program. ENERGY STAR, a voluntary labeling program established in 1992, provides consumers with energy efficiency data for a range of products so that they can make informed purchase judgments. The overall goal of the program is to encourage consumers to choose energy efficient products, advancing the nationwide goal of reducing energy consumption. The U.S. Environmental Protection Agency (EPA) managed the ENERGY STAR Program on a stand-alone basis until 1996 when it joined forces with themore » Department of Energy (Department). A Memorandum of Cooperation expanded the ENERGY STAR product categories, giving the Department responsibility for overseeing eight product categories such as windows, dishwashers, clothes washers, and refrigerators, while EPA retained responsibility for electronic product categories and heating, ventilating, and cooling equipment. Each agency is responsible for setting product efficiency specifications for those items under its control and for ensuring the proper use of the ENERGY STAR label in the marketplace. In August 2007, the EPA Office of Inspector General issued an audit report identifying significant control weaknesses in EPA's management of ENERGY STAR. The Department, concerned by the findings at EPA and eager to improve its own program, developed an approach to verify adherence to product specifications, ensure proper use of the ENERGY STAR label in the marketplace, and improve the establishment of product specifications. As evidenced by the commitment of $300 million in Recovery Act funds, the ENERGY STAR Program plays an important role in the U.S. efforts to reduce energy consumption. We initiated this audit to determine whether the Department had implemented the actions it announced in 2007 to strengthen the Program. The Department had not implemented planned improvements in the ENERGY STAR Program. Our audit revealed that officials had not: (1) Developed a formal quality assurance program to help ensure that product specifications were adhered to; (2) Effectively monitored the use of the ENERGY STAR label to ensure that only qualifying products were labeled as compliant; and (3) Formalized procedures for establishing and revising product specifications and for documenting decisions regarding those specifications. In our judgment, the delay in the Department's planned improvements in its management of the ENERGY STAR Program could reduce consumer confidence in the integrity of the ENERGY STAR label. Such loss of credibility could reduce energy savings, increase consumer risk, and diminish the value of the recent infusion of $300 million for ENERGY STAR rebates under the Recovery Act.« less
40 CFR 80.35 - Labeling of retail gasoline pumps; oxygenated gasoline.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Labeling of retail gasoline pumps; oxygenated gasoline. 80.35 Section 80.35 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Oxygenated Gasoline § 80.35 Labeling...
40 CFR 80.35 - Labeling of retail gasoline pumps; oxygenated gasoline.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Labeling of retail gasoline pumps; oxygenated gasoline. 80.35 Section 80.35 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Oxygenated Gasoline § 80.35 Labeling...
40 CFR 80.35 - Labeling of retail gasoline pumps; oxygenated gasoline.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Labeling of retail gasoline pumps; oxygenated gasoline. 80.35 Section 80.35 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Oxygenated Gasoline § 80.35 Labeling...
40 CFR 80.35 - Labeling of retail gasoline pumps; oxygenated gasoline.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Labeling of retail gasoline pumps; oxygenated gasoline. 80.35 Section 80.35 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Oxygenated Gasoline § 80.35 Labeling...
40 CFR 80.35 - Labeling of retail gasoline pumps; oxygenated gasoline.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Labeling of retail gasoline pumps; oxygenated gasoline. 80.35 Section 80.35 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Oxygenated Gasoline § 80.35 Labeling...
40 CFR 168.66 - Labeling of pesticide products and devices intended solely for export.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Labeling of pesticide products and... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS Export Policy and Procedures for Exporting Pesticides § 168.66 Labeling of pesticide products and devices...
40 CFR 168.66 - Labeling of pesticide products and devices intended solely for export.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Labeling of pesticide products and... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS STATEMENTS OF ENFORCEMENT POLICIES AND INTERPRETATIONS Export Policy and Procedures for Exporting Pesticides § 168.66 Labeling of pesticide products and devices...
40 CFR 156.156 - Residue removal instructions for refillable containers.
Code of Federal Regulations, 2011 CFR
2011-07-01
... adequate to protect human health and the environment. (2) Subject to meeting the standard in paragraph (b... (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.156 Residue removal instructions for refillable containers. The label of each pesticide product packaged in a...
40 CFR 156.156 - Residue removal instructions for refillable containers.
Code of Federal Regulations, 2014 CFR
2014-07-01
... adequate to protect human health and the environment. (2) Subject to meeting the standard in paragraph (b... (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.156 Residue removal instructions for refillable containers. The label of each pesticide product packaged in a...
40 CFR 156.156 - Residue removal instructions for refillable containers.
Code of Federal Regulations, 2013 CFR
2013-07-01
... adequate to protect human health and the environment. (2) Subject to meeting the standard in paragraph (b... (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.156 Residue removal instructions for refillable containers. The label of each pesticide product packaged in a...
40 CFR 156.156 - Residue removal instructions for refillable containers.
Code of Federal Regulations, 2012 CFR
2012-07-01
... adequate to protect human health and the environment. (2) Subject to meeting the standard in paragraph (b... (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.156 Residue removal instructions for refillable containers. The label of each pesticide product packaged in a...
40 CFR 156.156 - Residue removal instructions for refillable containers.
Code of Federal Regulations, 2010 CFR
2010-07-01
... adequate to protect human health and the environment. (2) Subject to meeting the standard in paragraph (b... (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.156 Residue removal instructions for refillable containers. The label of each pesticide product packaged in a...
40 CFR 85.530 - Vehicle/engine labels and packaging labels.
Code of Federal Regulations, 2013 CFR
2013-07-01
... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Exemption of Clean Alternative Fuel... from the tampering prohibition: (1) You must make a supplemental emission control information label for..., consistent with the requirements of this subpart. You may do this by identifying the OEM test group/engine...
40 CFR 85.530 - Vehicle/engine labels and packaging labels.
Code of Federal Regulations, 2011 CFR
2011-07-01
... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Exemption of Clean Alternative Fuel... from the tampering prohibition: (1) You must make a supplemental emission control information label for..., consistent with the requirements of this subpart. You may do this by identifying the OEM test group/engine...
Calendar Year 2007 Program Benefits for U.S. EPA Energy Star Labeled Products: Expanded Methodology
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sanchez, Marla; Homan, Gregory; Lai, Judy
2009-09-24
This report provides a top-level summary of national savings achieved by the Energy Star voluntary product labeling program. To best quantify and analyze savings for all products, we developed a bottom-up product-based model. Each Energy Star product type is characterized by product-specific inputs that result in a product savings estimate. Our results show that through 2007, U.S. EPA Energy Star labeled products saved 5.5 Quads of primary energy and avoided 100 MtC of emissions. Although Energy Star-labeled products encompass over forty product types, only five of those product types accounted for 65percent of all Energy Star carbon reductions achieved tomore » date, including (listed in order of savings magnitude)monitors, printers, residential light fixtures, televisions, and furnaces. The forecast shows that U.S. EPA?s program is expected to save 12.2 Quads of primary energy and avoid 215 MtC of emissions over the period of 2008?2015.« less
Electronic nicotine delivery systems: is there a need for regulation?
Trtchounian, Anna; Talbot, Prue
2011-01-01
Electronic nicotine delivery systems (ENDS) purport to deliver nicotine to the lungs of smokers. Five brands of ENDS were evaluated for design features, accuracy and clarity of labelling and quality of instruction manuals and associated print material supplied with products or on manufacturers' websites. ENDS were purchased from online vendors and analysed for various parameters. While the basic design of ENDS was similar across brands, specific design features varied significantly. Fluid contained in cartridge reservoirs readily leaked out of most brands, and it was difficult to assemble or disassemble ENDS without touching nicotine-containing fluid. Two brands had designs that helped lessen this problem. Labelling of cartridges was very poor; labelling of some cartridge wrappers was better than labelling of cartridges. In general, packs of replacement cartridges were better labelled than the wrappers or cartridges, but most packs lacked cartridge content and warning information, and sometimes packs had confusing information. Used cartridges contained fluid, and disposal of nicotine-containing cartridges was not adequately addressed on websites or in manuals. Orders were sometimes filled incorrectly, and safety features did not always function properly. Print and internet material often contained information or made claims for which there is currently no scientific support. Design flaws, lack of adequate labelling and concerns about quality control and health issues indicate that regulators should consider removing ENDS from the market until their safety can be adequately evaluated.
Modeling And Simulation Of Bar Code Scanners Using Computer Aided Design Software
NASA Astrophysics Data System (ADS)
Hellekson, Ron; Campbell, Scott
1988-06-01
Many optical systems have demanding requirements to package the system in a small 3 dimensional space. The use of computer graphic tools can be a tremendous aid to the designer in analyzing the optical problems created by smaller and less costly systems. The Spectra Physics grocery store bar code scanner employs an especially complex 3 dimensional scan pattern to read bar code labels. By using a specially written program which interfaces with a computer aided design system, we have simulated many of the functions of this complex optical system. In this paper we will illustrate how a recent version of the scanner has been designed. We will discuss the use of computer graphics in the design process including interactive tweaking of the scan pattern, analysis of collected light, analysis of the scan pattern density, and analysis of the manufacturing tolerances used to build the scanner.
Design for the Environment Products (Raw Data)
This dataset contains a list of products that carry the Design for the Environment (DfE) label. This mark enables consumers to quickly identify and choose products that can help protect the environment and are safer for families. When you see the DfE logo on a product it means that the DfE scientific review team has screened each ingredient for potential human health and environmental effects and that-based on currently available information, EPA predictive models, and expert judgment-the product contains only those ingredients that pose the least concern among chemicals in their class. Product manufacturers who become DfE partners, and earn the right to display the DfE logo on recognized products, have invested heavily in research, development and reformulation to ensure that their ingredients and finished product line up on the green end of the health and environmental spectrum while maintaining or improving product performance. EPA's Design for the Environment Program (DfE) has allowed use of their logo on over 2500 products. These products are formulated from the safest possible ingredients and have reduced the use of chemicals of concern by hundreds of millions of pounds. A Spanish version of this dataset is available for download at http://www.epa.gov/dfe/pubs/products/list_of_labeled_products.html
21 CFR 211.130 - Packaging and labeling operations.
Code of Federal Regulations, 2010 CFR
2010-04-01
... (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Packaging and Labeling Control § 211.130 Packaging and labeling operations. There shall be written procedures designed to... manufacture and control of the batch. (d) Examination of packaging and labeling materials for suitability and...
Homes built to meet EPA's specification can earn the WaterSense label. EPA criteria include WaterSense labeled plumbing fixtures, efficient hot water delivery systems, water-smart landscape design, and other features.
Thomas, Emily E; Pandey, Naresh; Knudsen, Sarah; Ball, Zachary T; Silberg, Jonathan J
2017-08-18
Transcriptional control can be used to program cells to label proteins with noncanonical amino acids by regulating the expression of orthogonal aminoacyl tRNA synthetases (aaRSs). However, we cannot yet program cells to control labeling in response to aaRS and ligand binding. To identify aaRSs whose activities can be regulated by interactions with ligands, we used a combinatorial approach to discover fragmented variants of Escherichia coli methionyl tRNA synthetase (MetRS) that require fusion to associating proteins for maximal activity. We found that these split proteins could be leveraged to create ligand-dependent MetRS using two approaches. When a pair of MetRS fragments was fused to FKBP12 and the FKBP-rapamycin binding domain (FRB) of mTOR and mutations were introduced that direct substrate specificity toward azidonorleucine (Anl), Anl metabolic labeling was significantly enhanced in growth medium containing rapamycin, which stabilizes the FKBP12-FRB complex. In addition, fusion of MetRS fragments to the termini of the ligand-binding domain of the estrogen receptor yielded proteins whose Anl metabolic labeling was significantly enhanced when 4-hydroxytamoxifen (4-HT) was added to the growth medium. These findings suggest that split MetRS can be fused to a range of ligand-binding proteins to create aaRSs whose metabolic labeling activities depend upon post-translational interactions with ligands.
9 CFR 381.125 - Special handling label requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... consumers, hotels, restaurants, or similar institutions and shall appear on the label. The information shall... such conspicuousness (as compared with other words, statements, designs or devices in the labeling) as...
An innovative pre-targeting strategy for tumor cell specific imaging and therapy
NASA Astrophysics Data System (ADS)
Qin, Si-Yong; Peng, Meng-Yun; Rong, Lei; Jia, Hui-Zhen; Chen, Si; Cheng, Si-Xue; Feng, Jun; Zhang, Xian-Zheng
2015-08-01
A programmed pre-targeting system for tumor cell imaging and targeting therapy was established based on the ``biotin-avidin'' interaction. In this programmed functional system, transferrin-biotin can be actively captured by tumor cells with the overexpression of transferrin receptors, thus achieving the pre-targeting modality. Depending upon avidin-biotin recognition, the attachment of multivalent FITC-avidin to biotinylated tumor cells not only offered the rapid fluorescence labelling, but also endowed the pre-targeted cells with targeting sites for the specifically designed biotinylated peptide nano-drug. Owing to the successful pre-targeting, tumorous HepG2 and HeLa cells were effectively distinguished from the normal 3T3 cells via fluorescence imaging. In addition, the self-assembled peptide nano-drug resulted in enhanced cell apoptosis in the observed HepG2 cells. The tumor cell specific pre-targeting strategy is applicable for a variety of different imaging and therapeutic agents for tumor treatments.A programmed pre-targeting system for tumor cell imaging and targeting therapy was established based on the ``biotin-avidin'' interaction. In this programmed functional system, transferrin-biotin can be actively captured by tumor cells with the overexpression of transferrin receptors, thus achieving the pre-targeting modality. Depending upon avidin-biotin recognition, the attachment of multivalent FITC-avidin to biotinylated tumor cells not only offered the rapid fluorescence labelling, but also endowed the pre-targeted cells with targeting sites for the specifically designed biotinylated peptide nano-drug. Owing to the successful pre-targeting, tumorous HepG2 and HeLa cells were effectively distinguished from the normal 3T3 cells via fluorescence imaging. In addition, the self-assembled peptide nano-drug resulted in enhanced cell apoptosis in the observed HepG2 cells. The tumor cell specific pre-targeting strategy is applicable for a variety of different imaging and therapeutic agents for tumor treatments. Electronic supplementary information (ESI) available: Experimental details, peptide structures, molecular weights, and additional data. See DOI: 10.1039/c5nr03862f
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-03
...] Guidance for Industry on Label Comprehension Studies for Nonprescription Drug Products; Availability AGENCY... announcing the availability of a guidance for industry entitled ``Label Comprehension Studies for Nonprescription Drug Products.'' The guidance provides recommendations on the design of label comprehension...
Developing a Graphical User Interface for the ALSS Crop Planning Tool
NASA Technical Reports Server (NTRS)
Koehlert, Erik
1997-01-01
The goal of my project was to create a graphical user interface for a prototype crop scheduler. The crop scheduler was developed by Dr. Jorge Leon and Laura Whitaker for the ALSS (Advanced Life Support System) program. The addition of a system-independent graphical user interface to the crop planning tool will make the application more accessible to a wider range of users and enhance its value as an analysis, design, and planning tool. My presentation will demonstrate the form and functionality of this interface. This graphical user interface allows users to edit system parameters stored in the file system. Data on the interaction of the crew, crops, and waste processing system with the available system resources is organized and labeled. Program output, which is stored in the file system, is also presented to the user in performance-time plots and organized charts. The menu system is designed to guide the user through analysis and decision making tasks, providing some help if necessary. The Java programming language was used to develop this interface in hopes of providing portability and remote operation.
7 CFR 205.310 - Agricultural products produced on an exempt or excluded operation.
Code of Federal Regulations, 2010 CFR
2010-01-01
... (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and...
40 CFR 152.166 - Labeling of restricted use products.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) PESTICIDE PROGRAMS PESTICIDE REGISTRATION AND CLASSIFICATION PROCEDURES Classification of Pesticides § 152... formulation into other pesticide products) is not subject to the labeling requirements of this subpart. ...
40 CFR 152.166 - Labeling of restricted use products.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) PESTICIDE PROGRAMS PESTICIDE REGISTRATION AND CLASSIFICATION PROCEDURES Classification of Pesticides § 152... formulation into other pesticide products) is not subject to the labeling requirements of this subpart. ...
40 CFR 152.166 - Labeling of restricted use products.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) PESTICIDE PROGRAMS PESTICIDE REGISTRATION AND CLASSIFICATION PROCEDURES Classification of Pesticides § 152... formulation into other pesticide products) is not subject to the labeling requirements of this subpart. ...
40 CFR 152.166 - Labeling of restricted use products.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) PESTICIDE PROGRAMS PESTICIDE REGISTRATION AND CLASSIFICATION PROCEDURES Classification of Pesticides § 152... formulation into other pesticide products) is not subject to the labeling requirements of this subpart. ...
40 CFR 152.166 - Labeling of restricted use products.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) PESTICIDE PROGRAMS PESTICIDE REGISTRATION AND CLASSIFICATION PROCEDURES Classification of Pesticides § 152... formulation into other pesticide products) is not subject to the labeling requirements of this subpart. ...
Nomura, A; Yamazaki, Y; Tsuji, T; Kawasaki, Y; Tanaka, S
1996-09-15
For all biological particles such as cells or cellular organelles, there are three-dimensional coordinates representing the centroid or center of gravity. These coordinates and other numerical parameters such as volume, fluorescence intensity, surface area, and shape are referred to in this paper as geometric properties, which may provide critical information for the clarification of in situ mechanisms of molecular and cellular functions in living organisms. We have established a method for the elucidation of these properties, designated the three-dimensional labeling program (3DLP). Algorithms of 3DLP are so simple that this method can be carried out through the use of software combinations in image analysis on a personal computer. To evaluate 3DLP, it was applied to a 32-cell-stage sea urchin embryo, double stained with FITC for cellular protein of blastomeres and propidium iodide for nuclear DNA. A stack of optical serial section images was obtained by confocal laser scanning microscopy. The method was found effective for determining geometric properties and should prove applicable to the study of many different kinds of biological particles in three-dimensional space.
NASA Astrophysics Data System (ADS)
Salehi, Mohammad; Schneider, Lilli; Ströbel, Philipp; Marx, Alexander; Packeisen, Jens; Schlücker, Sebastian
2014-01-01
SERS microscopy is a novel staining technique in immunohistochemistry, which is based on antibodies labeled with functionalized noble metal colloids called SERS labels or nanotags for optical detection. Conventional covalent bioconjugation of these SERS labels cannot prevent blocking of the antigen recognition sites of the antibody. We present a rational chemical design for SERS label-antibody conjugates which addresses this issue. Highly sensitive, silica-coated gold nanoparticle clusters as SERS labels are non-covalently conjugated to primary antibodies by using the chimeric protein A/G, which selectively recognizes the Fc part of antibodies and therefore prevents blocking of the antigen recognition sites. In proof-of-concept two-color imaging experiments for the co-localization of p63 and PSA on non-neoplastic prostate tissue FFPE specimens, we demonstrate the specificity and signal brightness of these rationally designed primary antibody-protein A/G-gold nanocluster conjugates.SERS microscopy is a novel staining technique in immunohistochemistry, which is based on antibodies labeled with functionalized noble metal colloids called SERS labels or nanotags for optical detection. Conventional covalent bioconjugation of these SERS labels cannot prevent blocking of the antigen recognition sites of the antibody. We present a rational chemical design for SERS label-antibody conjugates which addresses this issue. Highly sensitive, silica-coated gold nanoparticle clusters as SERS labels are non-covalently conjugated to primary antibodies by using the chimeric protein A/G, which selectively recognizes the Fc part of antibodies and therefore prevents blocking of the antigen recognition sites. In proof-of-concept two-color imaging experiments for the co-localization of p63 and PSA on non-neoplastic prostate tissue FFPE specimens, we demonstrate the specificity and signal brightness of these rationally designed primary antibody-protein A/G-gold nanocluster conjugates. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr05890e
46 CFR 160.037-5 - Labeling and marking.
Code of Federal Regulations, 2011 CFR
2011-10-01
...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-5 Labeling and marking. (a) Labeling. Each hand orange smoke distress signal shall bear a label securely affixed thereto...: (Company brand or style designation) Hand Orange Smoke Distress Signal For daytime use—50 seconds burning...
46 CFR 160.037-5 - Labeling and marking.
Code of Federal Regulations, 2013 CFR
2013-10-01
...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-5 Labeling and marking. (a) Labeling. Each hand orange smoke distress signal shall bear a label securely affixed thereto...: (Company brand or style designation) Hand Orange Smoke Distress Signal For daytime use—50 seconds burning...
46 CFR 160.037-5 - Labeling and marking.
Code of Federal Regulations, 2012 CFR
2012-10-01
...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-5 Labeling and marking. (a) Labeling. Each hand orange smoke distress signal shall bear a label securely affixed thereto...: (Company brand or style designation) Hand Orange Smoke Distress Signal For daytime use—50 seconds burning...
46 CFR 160.037-5 - Labeling and marking.
Code of Federal Regulations, 2014 CFR
2014-10-01
...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-5 Labeling and marking. (a) Labeling. Each hand orange smoke distress signal shall bear a label securely affixed thereto...: (Company brand or style designation) Hand Orange Smoke Distress Signal For daytime use—50 seconds burning...
49 CFR 569.9 - Labeling of regroovable tires.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 6 2010-10-01 2010-10-01 false Labeling of regroovable tires. 569.9 Section 569.9... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGROOVED TIRES § 569.9 Labeling of regroovable tires. (a) Regroovable tires. After August 30, 1969, each tire designed and constructed for regrooving shall be labeled...
21 CFR 1271.250 - Labeling controls.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Labeling controls. 1271.250 Section 1271.250 Food..., AND CELLULAR AND TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.250 Labeling controls. (a) General. You must establish and maintain procedures to control the labeling of HCT/Ps. You must design...
21 CFR 1271.250 - Labeling controls.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Labeling controls. 1271.250 Section 1271.250 Food..., AND CELLULAR AND TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.250 Labeling controls. (a) General. You must establish and maintain procedures to control the labeling of HCT/Ps. You must design...
21 CFR 1271.250 - Labeling controls.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Labeling controls. 1271.250 Section 1271.250 Food..., AND CELLULAR AND TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.250 Labeling controls. (a) General. You must establish and maintain procedures to control the labeling of HCT/Ps. You must design...
21 CFR 1271.250 - Labeling controls.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Labeling controls. 1271.250 Section 1271.250 Food..., AND CELLULAR AND TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.250 Labeling controls. (a) General. You must establish and maintain procedures to control the labeling of HCT/Ps. You must design...
21 CFR 1271.250 - Labeling controls.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Labeling controls. 1271.250 Section 1271.250 Food..., AND CELLULAR AND TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.250 Labeling controls. (a) General. You must establish and maintain procedures to control the labeling of HCT/Ps. You must design...
Determinants of Nutrition Label Use among College Students
ERIC Educational Resources Information Center
Rasberry, Catherine N.; Chaney, Beth H.; Housman, Jeff M.; Misra, Ranjita; Miller, Paula J.
2007-01-01
The purpose of this research was to assess the frequency of nutrition label use among college students and its relationship to nutrition and label knowledge, attitudes, and beliefs regarding diet-disease relationships, and to determine factors predictive of frequent or infrequent label use. This study utilized a cross-sectional design. Volunteer…
Characteristics of Child Sexual Abuse in the United States Air Force.
1986-08-01
68 CHILD ABUSE IN MILITARY AND CIVILIAN COMMUNITIES ............................. 72 SUMMARY AND DISCUSSION OF IMPLICATIONS OF THE LITERATURE...AND CHILD SEXUAL ABUSE IN THE AIR FORCE ............... 86 LABELING THEORY ........................... 87 CHILD ABUSE AND THE LABELING PERSPECTIVE...and, case status) of the reports of child sexual abuse made to the Family Advocacy Program (the Air Force’s program for dealing with child abuse --this
The synthesis of a tritium, carbon-14, and stable isotope-labeled cathepsin C inhibitors.
Allen, Paul; Bragg, Ryan A; Caffrey, Moya; Ericsson, Cecilia; Hickey, Michael J; Kingston, Lee P; Elmore, Charles S
2017-02-01
As part of a medicinal chemistry program aimed at developing a highly potent and selective cathepsin C inhibitor, tritium, carbon-14, and stable isotope-labeled materials were required. The synthesis of tritium-labeled methanesulfonate 5 was achieved via catalytic tritiolysis of a chloro precursor, albeit at a low radiochemical purity of 67%. Tritium-labeled AZD5248 was prepared via a 3-stage synthesis, utilizing amide-directed hydrogen isotope exchange. Carbon-14 and stable isotope-labeled AZD5248 were successfully prepared through modifications of the medicinal chemistry synthetic route, enabling the use of available labeled intermediates. Copyright © 2016 John Wiley & Sons, Ltd.
Ryan, Michael P; Costello-White, Reagan N
2017-01-01
We demonstrate an expanded procedure for assessing drug-label comprehension. Innovations include a pretest of drug preconceptions, verbal ability and label attentiveness measures, a label-scanning task, a free-recall test, category-clustering measures, and preconception-change scores. In total, 55 female and 39 male undergraduates read a facsimile Drug Facts Label for aspirin, a Cohesive-Prose Label, or a Scrambled-Prose Label. The Drug Facts Label outperformed the Scrambled-Prose Label, but not the Cohesive-Prose Label, in scanning effectiveness. The Drug Facts Label was no better than the Cohesive-Prose Label or the Scrambled-Prose Label in promoting attentiveness, recall and organization of drug facts, or misconception refutation. Discussion focuses on the need for refutational labels based on a sequence-of-events text schema. PMID:29379613
Song, Youngjun; Takahashi, Tsukasa; Kim, Sejung; Heaney, Yvonne C; Warner, John; Chen, Shaochen; Heller, Michael J
2017-01-11
We demonstrate a DNA double-write process that uses UV to pattern a uniquely designed DNA write material, which produces two distinct binding identities for hybridizing two different complementary DNA sequences. The process requires no modification to the DNA by chemical reagents and allows programmed DNA self-assembly and further UV patterning in the UV exposed and nonexposed areas. Multilayered DNA patterning with hybridization of fluorescently labeled complementary DNA sequences, biotin probe/fluorescent streptavidin complexes, and DNA patterns with 500 nm line widths were all demonstrated.
USDA-ARS?s Scientific Manuscript database
Front-of-pack labeling systems may provide additional guidance to that already available to facilitate the identification of foods that improve diet quality. We examined the association between choosing foods that meet criteria of an established front-of-pack labeling system with food-group and nutr...
Resnick, Marc L; Sanchez, Julian
2004-01-01
As companies increase the quantity of information they provide through their Web sites, it is critical that content is structured with an appropriate architecture. However, resource constraints often limit the ability of companies to apply all Web design principles completely. This study quantifies the effects of two major information architecture principles in a controlled study that isolates the incremental effects of organizational scheme and labeling on user performance and satisfaction. Sixty participants with a wide range of Internet and on-line shopping experience were recruited to complete a series of shopping tasks on a prototype retail shopping Web site. User-centered labels provided a significant benefit in performance and satisfaction over labels obtained through company-centered methods. User-centered organization did not result in improved performance except when the label quality was poor. Significant interactions suggest specific guidelines for allocating resources in Web site design. Applications of this research include the design of Web sites for any commercial application, particularly E-commerce.
Labeling and Rating Systems: Greater Access or Censorship?
ERIC Educational Resources Information Center
Martin, Ann M.
2015-01-01
This article asks the question: How well versed are school librarians on issues related to labeling and rating systems? As school librarians continue to design and implement resource location schemes to assist patrons, they must recognize the difference between using labels to create interest in books or implementing labeling and rating systems…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zheng, Nina; Zhou, Nan; Fridley, David
2012-03-01
This report presents a technical review of international minimum energy performance standards (MEPS), voluntary and mandatory energy efficiency labels and test procedures for five products being considered for new or revised MEPS in China: copy machines, external power supply, LED displays, residential gas cooktops and flat-screen televisions. For each product, an overview of the scope of existing international standards and labeling programs, energy values and energy performance metrics and description and detailed summary table of criteria and procedures in major test standards are presented.
Graham, Dan J.; Jeffery, Robert W.
2012-01-01
Background Nutrition Facts labels can keep consumers better informed about their diets' nutritional composition, however, consumers currently do not understand these labels well or use them often. Thus, modifying existing labels may benefit public health. Objective The present study tracked the visual attention of individuals making simulated food-purchasing decisions to assess Nutrition Facts label viewing. Primary research questions were how self-reported viewing of Nutrition Facts labels and their components relates to measured viewing and whether locations of labels and specific label components relate to viewing. Design The study involved a simulated grocery shopping exercise conducted on a computer equipped with an eye-tracking camera. A post-task survey assessed self-reported nutrition information viewing, health behaviors, and demographics. Subjects/setting Individuals 18 years old and older and capable of reading English words on a computer (n=203) completed the 1-hour protocol at the University of Minnesota during Spring 2010. Statistical analyses Primary analyses included χ2, analysis of variance, and t tests comparing self-reported and measured viewing of label components in different presentation configurations. Results Self-reported viewing of Nutrition Facts label components was higher than objectively measured viewing. Label components at the top of the label were viewed more than those at the bottom, and labels positioned in the center of the screen were viewed more than those located on the sides. Conclusions Nutrition Facts label position within a viewing area and position of specific components on a label relate to viewing. Eye tracking is a valuable technology for evaluating consumers' attention to nutrition information, informing nutrition labeling policy (eg, front-of-pack labels), and designing labels that best support healthy dietary decisions. PMID:22027053
Human factors and the FDA's goals: improved medical device design.
Burlington, D B
1996-01-01
The Food and Drug Administration's new human factors design requirements for medical devices were previewed by the director of the FDA's Center for Devices and Radiological Health (CDRH) at AAMI/FDA's Human Factors in Medical Devices Conference held in September 1995. Director Bruce Burlington, MD, said the FDA plans to take a closer look at how new medical devices are designed to ensure proper attention has been paid to human error prevention. As a medical practitioner who has witnessed use-related deaths and injuries, Burlington stressed the importance of the medical community's reporting use errors as they occur and manufacturers' creating easy-to-use labeling and packaging. He also called for simplicity and quality of design in medical products, and asked for a consolidated effort of all professionals involved in human factors issues to help implement and further the FDA's new human factors program. An edited version of his presentation appears here.
9 CFR 317.1 - Labels required; supervision by Program employee.
Code of Federal Regulations, 2010 CFR
2010-01-01
..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION... to bear such a label. (1) Wrappings of dressed carcasses and primal parts in an unprocessed state...
40 CFR 205.55-4 - Labeling-compliance.
Code of Federal Regulations, 2010 CFR
2010-07-01
... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205.55-4 Labeling... and Heavy Trucks. The following acts or the causing thereof by any person are prohibited by the Noise...
PRN 84-5: Label Improvement Program for Fumigants
This notice required registrants of fumigant products to revise the labeling of products registered under FIFRA section 3 or 24(c) to include additional precautionary statements and other statements described in the notice.
NASA Astrophysics Data System (ADS)
Neakrase, Lynn; Hornung, Danae; Sweebe, Kathrine; Huber, Lyle; Chanover, Nancy J.; Stevenson, Zena; Berdis, Jodi; Johnson, Joni J.; Beebe, Reta F.
2017-10-01
The Research and Analysis programs within NASA’s Planetary Science Division now require archiving of resultant data with the Planetary Data System (PDS) or an equivalent archive. The PDS Atmospheres Node is developing an online environment for assisting data providers with this task. The Educational Labeling System for Atmospheres (ELSA) is being designed with Django/Python coding to provide an easier environment for facilitating not only communication with the PDS node, but also streamlining the process of learning, developing, submitting, and reviewing archive bundles under the new PDS4 archiving standard. Under the PDS4 standard, data are archived in bundles, collections, and basic products that form an organizational hierarchy of interconnected labels that describe the data and relationships between the data and its documentation. PDS4 labels are implemented using Extensible Markup Language (XML), which is an international standard for managing metadata. Potential data providers entering the ELSA environment can learn more about PDS4, plan and develop label templates, and build their archive bundles. ELSA provides an interface to tailor label templates aiding in the creation of required internal Logical Identifiers (URN - Uniform Resource Names) and Context References (missions, instruments, targets, facilities, etc.). The underlying structure of ELSA uses Django/Python code that make maintaining and updating the interface easy to do for our undergraduate/graduate students. The ELSA environment will soon provide an interface for using the tailored templates in a pipeline to produce entire collections of labeled products, essentially building the user’s archive bundle. Once the pieces of the archive bundle are assembled, ELSA provides options for queuing the completed bundle for peer review. The peer review process has also been streamlined for online access and tracking to help make the archiving process with PDS as transparent as possible. We discuss the current status of ELSA and provide examples of its implementation.
TreeRipper web application: towards a fully automated optical tree recognition software.
Hughes, Joseph
2011-05-20
Relationships between species, genes and genomes have been printed as trees for over a century. Whilst this may have been the best format for exchanging and sharing phylogenetic hypotheses during the 20th century, the worldwide web now provides faster and automated ways of transferring and sharing phylogenetic knowledge. However, novel software is needed to defrost these published phylogenies for the 21st century. TreeRipper is a simple website for the fully-automated recognition of multifurcating phylogenetic trees (http://linnaeus.zoology.gla.ac.uk/~jhughes/treeripper/). The program accepts a range of input image formats (PNG, JPG/JPEG or GIF). The underlying command line c++ program follows a number of cleaning steps to detect lines, remove node labels, patch-up broken lines and corners and detect line edges. The edge contour is then determined to detect the branch length, tip label positions and the topology of the tree. Optical Character Recognition (OCR) is used to convert the tip labels into text with the freely available tesseract-ocr software. 32% of images meeting the prerequisites for TreeRipper were successfully recognised, the largest tree had 115 leaves. Despite the diversity of ways phylogenies have been illustrated making the design of a fully automated tree recognition software difficult, TreeRipper is a step towards automating the digitization of past phylogenies. We also provide a dataset of 100 tree images and associated tree files for training and/or benchmarking future software. TreeRipper is an open source project licensed under the GNU General Public Licence v3.
Sargeant, J M; O'Connor, A M; Cullen, J N; Makielski, K M; Jones-Bitton, A
2017-07-01
Study design labels are used to identify relevant literature to address specific clinical and research questions and to aid in evaluating the evidentiary value of research. Evidence from the human healthcare literature indicates that the label "case series" may be used inconsistently and inappropriately. Our primary objective was to determine the proportion of studies in the canine and feline veterinary literature labeled as case series that actually corresponded to descriptive cohort studies, population-based cohort studies, or other study designs. Our secondary objective was to identify the proportion of case series in which potentially inappropriate inferential statements were made. Descriptive evaluation of published literature. One-hundred published studies (from 19 journals) labeled as case series. Studies were identified by a structured literature search, with random selection of 100 studies from the relevant citations. Two reviewers independently characterized each study, with disagreements resolved by consensus. Of the 100 studies, 16 were case series. The remaining studies were descriptive cohort studies (35), population-based cohort studies (36), or other observational or experimental study designs (13). Almost half (48.8%) of the case series or descriptive cohort studies, with no control group and no formal statistical analysis, included inferential statements about the efficacy of treatment or statistical significance of potential risk factors. Authors, peer-reviewers, and editors should carefully consider the design elements of a study to accurately identify and label the study design. Doing so will facilitate an understanding of the evidentiary value of the results. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.
Code of Federal Regulations, 2010 CFR
2010-01-01
...) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market...
Food Label Use and Food Label Skills among Immigrants from the Former Soviet Union
ERIC Educational Resources Information Center
Lubman, Nadia; Doak, Colleen; Jasti, Sunitha
2012-01-01
Objective: To assess food label use and skills and to identify their correlates among immigrants from the former Soviet Union (FSU). Design/Setting/Participants: Cross-sectional survey of a convenience sample of 200 FSU immigrants residing in New York City. Variables Measured: Food label use and skills; acculturation; and socioeconomic and…
7 CFR 205.670 - Inspection and testing of agricultural product to be sold or labeled “organic.”
Code of Federal Regulations, 2012 CFR
2012-01-01
...), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM... agricultural product to be sold or labeled “organic.” (a) All agricultural products that are to be sold, labeled, or represented as “100 percent organic,” “organic,” or “made with organic (specified ingredients...
Bourbeau, Jean; Casan, Pere; Tognella, Silvia; Haidl, Peter; Texereau, Joëlle B; Kessler, Romain
2016-01-01
Most hospitalizations and costs related to COPD are due to exacerbations and insufficient disease management. The COPD patient Management European Trial (COMET) is investigating a home-based multicomponent COPD self-management program designed to reduce exacerbations and hospital admissions. Multicenter parallel randomized controlled, open-label superiority trial. Thirty-three hospitals in four European countries. A total of 345 patients with Global initiative for chronic Obstructive Lung Disease III/IV COPD. The program includes extensive patient coaching by health care professionals to improve self-management (eg, develop skills to better manage their disease), an e-health platform for reporting frequent health status updates, rapid intervention when necessary, and oxygen therapy monitoring. Comparator is the usual management as per the center's routine practice. Yearly number of hospital days for acute care, exacerbation number, quality of life, deaths, and costs.
21 CFR 211.42 - Design and construction features.
Code of Federal Regulations, 2014 CFR
2014-04-01
... product containers, closures, labeling, in-process materials, or drug products, and to prevent contamination. The flow of components, drug product containers, closures, labeling, in-process materials, and... withholding from use of components, drug product containers, closures, and labeling, pending the appropriate...
21 CFR 211.42 - Design and construction features.
Code of Federal Regulations, 2012 CFR
2012-04-01
... product containers, closures, labeling, in-process materials, or drug products, and to prevent contamination. The flow of components, drug product containers, closures, labeling, in-process materials, and... withholding from use of components, drug product containers, closures, and labeling, pending the appropriate...
21 CFR 211.42 - Design and construction features.
Code of Federal Regulations, 2013 CFR
2013-04-01
... product containers, closures, labeling, in-process materials, or drug products, and to prevent contamination. The flow of components, drug product containers, closures, labeling, in-process materials, and... withholding from use of components, drug product containers, closures, and labeling, pending the appropriate...
21 CFR 211.42 - Design and construction features.
Code of Federal Regulations, 2011 CFR
2011-04-01
... product containers, closures, labeling, in-process materials, or drug products, and to prevent contamination. The flow of components, drug product containers, closures, labeling, in-process materials, and... withholding from use of components, drug product containers, closures, and labeling, pending the appropriate...
Sánchez Cuervo, Marina; Muñoz García, María; Gómez de Salazar López de Silanes, María Esther; Bermejo Vicedo, Teresa
2015-03-01
to describe the features of a computer program for management of drugs in special situations (off-label and compassionate use) in a Department of Hospital Pharmacy (PD). To describe the methodology followed for its implementation in the Medical Services. To evaluate their use after 2 years of practice. the design was carried out by pharmacists of the PD. The stages of the process were: selection of a software development company, establishment of a working group, selection of a development platform, design of an interactive Viewer, definition of functionality and data processing, creation of databases, connection, installation and configuration, application testing and improvements development. A directed sequential strategy was used for implementation in the Medical Services. The program's utility and experience of use were evaluated after 2 years. a multidisciplinary working group was formed and developed Pk_Usos®. The program works in web environment with a common viewer for all users enabling real time checking of the request files' status and that adapts to the management of medications in special situations procedure. Pk_Usos® was introduced first in the Oncology Department, with 15 oncologists as users of the program. 343 patients had 384 treatment requests managed, of which 363 are authorized throughout two years. PK_Usos® is the first software designed for the management of drugs in special situations in the PD. It is a dynamic and efficient tool for all professionals involved in the process by optimization of times. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.
Techno-Economic Analysis of Indian Draft Standard Levels for RoomAir Conditioners
DOE Office of Scientific and Technical Information (OSTI.GOV)
McNeil, Michael A.; Iyer, Maithili
The Indian Bureau of Energy Efficiency (BEE) finalized its first set of efficiency standards and labels for room air conditioners in July of 2006. These regulations followed soon after the publication of levels for frost-free refrigerators in the same year. As in the case of refrigerators, the air conditioner program introduces Minimum Efficiency Performance Standards (MEPS) and comparative labels simultaneously, with levels for one to five stars. Also like the refrigerator program, BEE defined several successive program phases of increasing stringency. In support of BEE's refrigerator program, Lawrence Berkeley National Laboratory (LBNL) produced an analysis of national impacts of standardsmore » in collaboration with the Collaborative Labeling and Standards Program (CLASP). That analysis drew on LBNL's experience with standards programs in the United States, as well as many other countries. Subsequently, as part of the process for setting optimal levels for air conditioner regulations, CLASP commissioned LBNL to provide support to BEE in the form of a techno-economic evaluation of air conditioner efficiency technologies. This report describes the methodology and results of this techno-economic evaluation. The analysis consists of three components: (1) Cost effectiveness to consumers of efficiency technologies relative to current baseline. (2) Impacts on the current market from efficiency regulations. (3) National energy and financial impacts. The analysis relied on detailed and up-to-date technical data made available by BEE and industry representatives. Technical parameters were used in conjunction with knowledge about air conditioner use patterns in the residential and commercial sectors, and prevailing marginal electricity prices, in order to give an estimate of per-unit financial impacts. In addition, the overall impact of the program was evaluated by combining unit savings with market forecasts in order to yield national impacts. LBNL presented preliminary results of these analyses in May 2006, at a meeting of BEEs Technical Committee for Air Conditioners. This meeting was attended by a wide array of stakeholder, including industry representatives, engineers and consumer advocates. Comments made by stakeholders at this meeting are incorporated into the final analysis presented in this report. The current analysis begins with the Rating Plan drafted by BEE in 2006, along with an evaluation of the market baseline according to test data submitted by manufacturers. MEPS, label rating levels, and baseline efficiencies are presented in Section 2. First, we compare Indian MEPS with current standards in other countries, and assess their relative stringency. Baseline efficiencies are then used to estimate the fraction of models likely to remain on the market at each phase of the program, and the impact on market-weighted efficiency levels. Section 3 deals with cost-effectiveness of higher efficiency design options. The cost-benefit analysis is grounded in technical parameters provided by industry representatives in India. This data allows for an assessment of financial costs and benefits to consumers as a result of the standards and labeling program. A Life-Cycle Cost (LCC) calculation is used to evaluate the impacts of the program at the unit level, thus providing some insight into the appropriateness of the levels chosen, and additional opportunities for further ratcheting. In addition to LCC, we also calculate payback periods, cost of conserved energy (CCE), and return on investment (ROI). Finally, Section 4 covers national impacts. This is an extension of unit level estimates in the two previous sections. Extrapolation to the national level depends on a forecast of air conditioner purchases (shipments), which we describe here. Following the cost-benefit analysis, we construct several efficiency scenarios including the BEE plan, but also considering further potential for efficiency improvement. These are combined with shipments through a stock accounting model in order to forecast air conditioner energy consumption in each scenario, and associated electricity savings and carbon emission mitigation. Finally, financial costs and savings are scaled to the national level to evaluate net fiscal benefits.« less
Non-Animal Testing Approach to EPA Labeling for Eye Irritation
This document is an update to EPA’s 2013 published alternative testing approach (using in vitro/ex vivo assays) for determination of eye irritation potential in the pesticide program under EPA's classification and labeling system.
Feasibility of voluntary menu labeling among locally owned restaurants.
Britt, John W; Frandsen, Kirsten; Leng, Kirsten; Evans, Diane; Pulos, Elizabeth
2011-01-01
In 2007, Tacoma-Pierce County Health Department launched a restaurant menu labeling project called SmartMenu. The objective was to recruit locally owned restaurants to voluntarily post basic nutrition information on their menus or menu boards. Participating restaurants submitted recipes to an independent contractor for nutritional analysis and agreed to post calorie, fat, carbohydrate, and sodium values on new menus within 90 days of receiving results. Vigorous recruitment efforts by the Health Department between June 2007 and September 2008 included free advertising, consultation with a Registered Dietitian, and free nutritional analysis. By the end of 2008, a total of 24 restaurants participated in the program. Significant barriers to participation included infrequent use of standardized recipes, perceived business risk of labeling, and low perceived customer demand for nutrition information. Key program elements, recruitment strategies, and costs are discussed. Results have important implications for future efforts to increase the adoption of menu labeling by locally owned and operated restaurants.
Miranda-Ackerman, Marco A; Azzaro-Pantel, Catherine
2017-12-15
New consumer awareness is shifting industry towards more sustainable practices, creating a virtuous cycle between producers and consumers enabled by eco-labelling. Eco-labelling informs consumers of specific characteristics of products and has been used to market greener products. Eco-labelling in the food industry has yet been mostly focused on promoting organic farming, limiting the scope to the agricultural stage of the supply chain, while carbon labelling informs on the carbon footprint throughout the life cycle of the product. These labelling strategies help value products in the eyes of the consumer. Because of this, decision makers are motivated to adopt more sustainable models. In the food industry, this has led to important environmental impact improvements at the agricultural stage, while most other stages in the Food Supply Chain (FSC) have continued to be designed inefficiently. The objective of this work is to define a framework showing how carbon labelling can be integrated into the design process of the FSC. For this purpose, the concept of Green Supply Chain Network Design (GSCND) focusing on the strategic decision making for location and allocation of resources and production capacity is developed considering operational, financial and environmental (CO 2 emissions) issues along key stages in the product life cycle. A multi-objective optimization strategy implemented by use of a genetic algorithm is applied to a case study on orange juice production. The results show that the consideration of CO 2 emission minimization as an objective function during the GSCND process together with techno-economic criteria produces improved FSC environmental performance compared to both organic and conventional orange juice production. Typical results thus highlight the importance that carbon emissions optimization and labelling may have to improve FSC beyond organic labelling. Finally, CO 2 emission-oriented labelling could be an important tool to improve the effects eco-labelling has on food product environmental impact going forward. Copyright © 2017 Elsevier Ltd. All rights reserved.
International Comparison of Product Certification and Verification Methods for Appliances
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou, Nan; Romankiewicz, John; Fridley, David
2012-06-01
Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates andmore » energy savings potential.« less
Copp, Tessa; McCaffery, Kirsten; Azizi, Lamiae; Doust, Jenny; Mol, Ben W J; Jansen, Jesse
2017-04-01
Does the disease label 'polycystic ovary syndrome' (PCOS) have an impact on desire for medical testing and psychosocial outcomes? When given the disease label PCOS in a hypothetical scenario, participants had higher intention to have an ultrasound, perceived the condition to be more severe and had lower self-esteem than those not given the disease label. Widening diagnostic criteria and improved imaging sensitivity have increased the number of reproductive-aged women diagnosed with PCOS from 4% to 8% to up to 21%. The uncertain clinical benefit of knowing this diagnosis needs to be weighed against the potential for poor psychological outcomes in women labelled with PCOS. This experimental online study randomised 181 young women to receive one of four hypothetical scenarios of a doctor's visit in a 2 (PCOS disease label versus no disease label) x 2 (information about unreliability of ultrasounds in clarifying diagnosis versus no information) design. Participants were university students (mean age: 19.4). After presenting the scenario, intention to have an ultrasound, negative affect, self-esteem, perceived severity of condition, credibility of the doctor and interest in a second opinion were measured. Participants were then presented with a second scenario, where the possibility of PCOS overdiagnosis was mentioned. Change in intention and perceived severity were then measured. Participants given the PCOS label had significantly higher intention to have an ultrasound (mean = 6.62 versus mean = 5.76, P = 0.033, 95% CI(difference) = 0.069-1.599), perceived the condition to be more severe (17.17 versus 15.82, P = 0.019, 95% CI(difference) = 0.229-2.479) and had lower self-esteem (25.86 versus 27.56, P = 0.031, 95% CI(difference) = -3.187 to -0.157). After receiving overdiagnosis information, both intention and perceived severity decreased, regardless of condition (both P < 0.001). This study used hypothetical scenarios; it is likely that for women facing a real diagnosis of PCOS, outcomes would be more affected than in the current study. The hypothetical design, however, allowed the symptoms and risks of PCOS to be held constant across conditions, the impact on intention and psychosocial outcomes directly attributable to the effect of the disease label. These findings demonstrate the potential negative consequences of PCOS labelling. It is crucial we consider the impact of the label before diagnosing more women with PCOS when clinical benefit of this diagnosis is uncertain. This paper was written with support from a NHMRC grant awarded to the Screening and Test Evaluation Program. J.J. is supported by an NHMRC Early Career Fellowship. K.M. is supported by an NHMRC Career Development Fellowship. The authors declare that no competing interests exist. ACTRN12617000111370. 20/01/2017. 01/06/2015. © The Author 2017. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com
Compliance and Verification of Standards and Labelling Programs in China: Lessons Learned
DOE Office of Scientific and Technical Information (OSTI.GOV)
Saheb, Yamina; Zhou, Nan; Fridley, David
2010-06-11
After implementing several energy efficiency standards and labels (30 products covered by MEPS, 50 products covered by voluntary labels and 19 products by mandatory labels), the China National Institute of Standardization (CNIS) is now implementing verification and compliance mechanism to ensure that the energy information of labeled products comply with the requirements of their labels. CNIS is doing so by organizing check testing on a random basis for room air-conditioners, refrigerators, motors, heaters, computer displays, ovens, and self -ballasted lamps. The purpose of the check testing is to understand the implementation of the Chinese labeling scheme and help local authoritiesmore » establishing effective compliance mechanisms. In addition, to ensure robustness and consistency of testing results, CNIS has coordinated a round robin testing for room air conditioners. Eight laboratories (Chinese (6), Australian (1) and Japanese (1)) have been involved in the round robin testing and tests were performed on four sets of samples selected from manufacturer?s production line. This paper describes the methodology used in undertaking both check and round robin testing, provides analysis of testing results and reports on the findings. The analysis of both check and round robin testing demonstrated the benefits of a regularized verification and monitoring system for both laboratories and products such as (i) identifying the possible deviations between laboratories to correct them, (ii) improving the quality of testing facilities, (iii) ensuring the accuracy and reliability of energy label information in order to strength the social credibility of the labeling program and the enforcement mechanism in place.« less
Compliance and Verification of Standards and Labeling Programs in China: Lessons Learned
DOE Office of Scientific and Technical Information (OSTI.GOV)
Saheb, Yamina; Zhou, Nan; Fridley, David
2010-08-01
After implementing several energy efficiency standards and labels (30 products covered by MEPS, 50 products covered by voluntary labels and 19 products by mandatory labels), the China National Institute of Standardization (CNIS) is now implementing verification and compliance mechanism to ensure that the energy information of labeled products comply with the requirements of their labels. CNIS is doing so by organizing check testing on a random basis for room air-conditioners, refrigerators, motors, heaters, computer displays, ovens, and self -ballasted lamps. The purpose of the check testing is to understand the implementation of the Chinese labeling scheme and help local authoritiesmore » establishing effective compliance mechanisms. In addition, to ensure robustness and consistency of testing results, CNIS has coordinated a round robin testing for room air conditioners. Eight laboratories (Chinese (6), Australian (1) and Japanese (1)) have been involved in the round robin testing and tests were performed on four sets of samples selected from manufacturer's production line. This paper describes the methodology used in undertaking both check and round robin testing, provides analysis of testing results and reports on the findings. The analysis of both check and round robin testing demonstrated the benefits of a regularized verification and monitoring system for both laboratories and products such as (i) identifying the possible deviations between laboratories to correct them, (ii) improving the quality of testing facilities, (iii) ensuring the accuracy and reliability of energy label information in order to strength the social credibility of the labeling program and the enforcement mechanism in place.« less
Peer-Reviewed Publication of Clinical Trials Completed for Pediatric Exclusivity
Benjamin, Daniel Kelly; Smith, Philip Brian; Murphy, M. Dianne; Roberts, Rosemary; Mathis, Lisa; Avant, Debbie; Califf, Robert M; Li, Jennifer S.
2009-01-01
Context Much of pediatric drug use is “off-label” because appropriate pediatric studies have not been conducted and the drugs have not been labeled by the US Food and Drug Administration (FDA) for use in children. In 1997, Congress authorized FDA to grant extensions of marketing rights known as “pediatric exclusivity” if FDA-requested pediatric trials were conducted. As a result, there have been over 100 product labeling changes. The publication status of studies completed for pediatric exclusivity has not been evaluated. Objective To quantify the dissemination of results of studies conducted for pediatric exclusivity into the peer-review literature. Design Cohort study of all trials conducted for Pediatric Exclusivity, the subsequent labeling changes, and the publication of those studies in peer-reviewed journals. We categorized each study in the exclusivity application as ”successful” or “unsuccessful” based on FDA approval of the indication sought by the sponsor. We categorized any labeling changes resulting from the studies as ”positive” or “negative” for the drug under study. We then evaluated aspects of the studies and product label changes that were associated with subsequent publication in peer-reviewed medical journals. Main Outcome Measures Publication of the trial data in peer-reviewed journals. Results Between 1998 and 2004, 253 studies were submitted to FDA for pediatric exclusivity: 50% evaluated efficacy, 20% were multi-dose pharmacokinetic, 13% were single-dose pharmacokinetic, and 17% were safety studies. Labeling changes were positive for 127/253 (50%) of studies; only 112/253 (44%) were published. Efficacy studies and those with a favorable labeling change were more likely to be published. Of 100 studies resulting in important labeling changes, only 33 were published. Conclusions The pediatric exclusivity program has been successful in encouraging drug studies in children. However, the dissemination of these results in the peer-reviewed literature is limited. The results of these trials and future studies conducted for pediatric exclusivity should be published in peer-reviewed journals. Mechanisms to more widely disperse this information warrant further evaluation. PMID:16968851
Calorie Labeling, Fast Food Purchasing and Restaurant Visits
Elbel, Brian; Mijanovich, Tod; Dixon, Beth; Abrams, Courtney; Weitzman, Beth; Kersh, Rogan; Auchincloss, Amy H.; Ogedegbe, Gbenga
2013-01-01
Objective Obesity is a pressing public health problem without proven population-wide solutions. Researchers sought to determine whether a city-mandated policy requiring calorie labeling at fast food restaurants was associated with consumer awareness of labels, calories purchased and fast food restaurant visits. Design and Methods Difference-in-differences design, with data collected from consumers outside fast food restaurants and via a random digit dial telephone survey, before (December 2009) and after (June 2010) labeling in Philadelphia (which implemented mandatory labeling) and Baltimore (matched comparison city). Measures included: self-reported use of calorie information, calories purchased determined via fast food receipts, and self-reported weekly fast-food visits. Results The consumer sample was predominantly Black (71%), and high school educated (62%). Post-labeling, 38% of Philadelphia consumers noticed the calorie labels for a 33 percentage point (p<.001) increase relative to Baltimore. Calories purchased and number of fast food visits did not change in either city over time. Conclusions While some consumer reports noticing and using calorie information, no population level changes were noted in calories purchased or fast food visits. Other controlled studies are needed to examine the longer term impact of labeling as it becomes national law. PMID:24136905
Identification and validation of nebulized aerosol devices for sputum induction
Davidson, Warren J; Dennis, John; The, Stephanie; Litoski, Belinda; Pieron, Cora; Leigh, Richard
2014-01-01
Induced sputum cell count measurement has proven reliability for evaluating airway inflammation in patients with asthma and other airway diseases. Although the use of nebulizer devices for sputum induction is commonplace, they are generally labelled as single-patient devices by the manufacturer and, therefore, cannot be used for multiple patients in large clinical sputum induction programs due to infect ion-control requirements. Accordingly, this study investigated the aerosol characteristics of alternative devices that could be used in such programs. BACKGROUND: Induced sputum cell counts are a noninvasive and reliable method for evaluating the presence, type and degree of airway inflammation in patients with asthma. Currently, standard nebulizer devices used for sputum induction in multiple patients are labelled as single-patient devices by the manufacturer, which conflicts with infection prevention and control requirements. As such, these devices cannot feasibly be used in a clinical sputum induction program. Therefore, there is a need to identify alternative nebulizer devices that are either disposable or labelled for multi-patient use. OBJECTIVE: To apply validated rigorous, scientific testing methods to identify and validate commercially available nebulizer devices appropriate for use in a clinical sputum induction program. METHODS: Measurement of nebulized aerosol output and size for the selected nebulizer designs followed robust International Organization for Standardization methods. Sputum induction using two of these nebulizers was successfully performed on 10 healthy adult subjects. The cytotechnologist performing sputum cell counts was blinded to the type of nebulizer used. RESULTS: The studied nebulizers had variable aerosol outputs. The AeroNeb Solo (Aerogen, Ireland), Omron NE-U17 (Omron, Japan) and EASYneb II (Flaem Nuova, Italy) systems were found to have similar measurements of aerosol size. There was no significant difference in induced sputum cell results between the AeroNeb Solo and EASYneb II devices. DISCUSSION: There is a need for rigorous, scientific evaluation of nebulizer devices for clinical applications, including sputum induction, for measurement of cell counts. CONCLUSION: The present study was the most comprehensive analysis of different nebulizer devices for sputum induction to measure cell counts, and provides a framework for appropriate evaluation of nebulizer devices for induced sputum testing. PMID:24288700
A Design of a Surgical Site Verification System.
Shen, Biyu; He, Yan; Chen, Haoyang
2017-01-01
Patient security is a significant issue in medical research and clinical practice at present. The Surgical Verification System (Patent Number: ZL 201420079273.5) is designed to recognize and check surgical sites of patients so as to ensure operation security and decrease the risk for practitioners. Composition: (1) Operating Room Server, (2) Label Reader, (3) E-Label, (4) Surgical Site Display, (5) Ward Client, (6) Label Rader-Writer, and (7) Acousto-Optic Alarm. If the Surgical identification, the surgical site, and so on are incorrect, a flashing label control will appear when the alarm rings. You can specify a sound to play for the alarm, a picture to draw, and a message to send. It is a user-friendly system.
40 CFR 156.10 - Labeling requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Prominence and legibility. (i) All words, statements, graphic representations, designs or other information..., statements, designs, or graphic matter on the labeling) and expressed in such terms as to render it likely to... phrase as “when used as directed”; and (x) Non-numerical and/or comparative statements on the safety of...
40 CFR 156.10 - Labeling requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) Prominence and legibility. (i) All words, statements, graphic representations, designs or other information..., statements, designs, or graphic matter on the labeling) and expressed in such terms as to render it likely to... phrase as “when used as directed”; and (x) Non-numerical and/or comparative statements on the safety of...
40 CFR 156.10 - Labeling requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) Prominence and legibility. (i) All words, statements, graphic representations, designs or other information..., statements, designs, or graphic matter on the labeling) and expressed in such terms as to render it likely to... phrase as “when used as directed”; and (x) Non-numerical and/or comparative statements on the safety of...
40 CFR 156.10 - Labeling requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) Prominence and legibility. (i) All words, statements, graphic representations, designs or other information..., statements, designs, or graphic matter on the labeling) and expressed in such terms as to render it likely to... phrase as “when used as directed”; and (x) Non-numerical and/or comparative statements on the safety of...
40 CFR 156.10 - Labeling requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) Prominence and legibility. (i) All words, statements, graphic representations, designs or other information..., statements, designs, or graphic matter on the labeling) and expressed in such terms as to render it likely to... phrase as “when used as directed”; and (x) Non-numerical and/or comparative statements on the safety of...
Gorski Findling, Mary T; Werth, Paul M; Musicus, Aviva A; Bragg, Marie A; Graham, Dan J; Elbel, Brian; Roberto, Christina A
2018-01-01
In 2011, a National Academy of Medicine report recommended that packaged food in the U.S. display a uniform front-of-package nutrition label, using a system such as a 0-3 star ranking. Few studies have directly compared this to other labels to determine which best informs consumers and encourages healthier purchases. In 2013, we randomized adult participants (N=1247) in an Internet-based survey to one of six conditions: no label control; single traffic light; multiple traffic light; Facts Up Front; NuVal; or 0-3 star ranking. We compared groups on purchase intentions and accuracy of participants' interpretation of food labels. There were no differences in the nutritional quality of hypothetical shopping baskets across conditions (p=0.845). All labels improved consumers' abilities to judge the nutritional quality of foods relative to no label, but the best designs varied by outcomes. NuVal and multiple traffic light labels led to the greatest accuracy identifying the healthier of two products (p<0.001), while the multiple traffic light also led to the most accurate estimates of saturated fat, sugar, and sodium (p<0.001). The single traffic light outperformed other labels when participants compared nutrient levels between similar products (p<0.03). Single/multiple traffic light and Facts Up Front labels led to the most accurate calories per serving estimations (p<0.001). Although front-of-package labels helped participants more accurately assess products' nutrition information relative to no label, no conditions shifted adults' purchase intentions. Results did not point to a clearly superior label design, but they suggest that a 3-star label might not be best for educating consumers. Copyright © 2017 Elsevier Inc. All rights reserved.
PRN 87-1: Label Improvement Program for Pesticides Applied through Irrigation Systems (Chemigation)
This Notice requires registrants of pesticide products registered under FIFRA and applied through irrigation systems to revise the labeling for such products to include additional use directions and other statements described in this Notice.
Code of Federal Regulations, 2012 CFR
2012-01-01
... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) COUNTRY OF ORIGIN LABELING FOR FISH AND SHELLFISH General Provisions Country of Origin Notification § 60.300 Labeling. (a) Country of origin declarations and method of production (wild and/or farm-raised) designations can either...
Code of Federal Regulations, 2014 CFR
2014-01-01
... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) COUNTRY OF ORIGIN LABELING FOR FISH AND SHELLFISH General Provisions Country of Origin Notification § 60.300 Labeling. (a) Country of origin declarations and method of production (wild and/or farm-raised) designations can either...
Code of Federal Regulations, 2013 CFR
2013-01-01
... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) COUNTRY OF ORIGIN LABELING FOR FISH AND SHELLFISH General Provisions Country of Origin Notification § 60.300 Labeling. (a) Country of origin declarations and method of production (wild and/or farm-raised) designations can either...
Code of Federal Regulations, 2011 CFR
2011-01-01
... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) COUNTRY OF ORIGIN LABELING FOR FISH AND SHELLFISH General Provisions Country of Origin Notification § 60.300 Labeling. (a) Country of origin declarations and method of production (wild and/or farm-raised) designations can either...
Accessorizing Building Science – A Web Platform to Support Multiple Market Transformation Programs
DOE Office of Scientific and Technical Information (OSTI.GOV)
Madison, Michael C.; Antonopoulos, Chrissi A.; Dowson, Scott T.
As demand for improved energy efficiency in homes increases, builders need information on the latest findings in building science, rapidly ramping-up energy codes, and technical requirements for labeling programs. The Building America Solution Center is a Department of Energy (DOE) website containing hundreds of expert guides designed to help residential builders install efficiency measures in new and existing homes. Builders can package measures with other media for customized content. Website content provides technical support to market transformation programs such as ENERGY STAR and has been cloned and adapted to provide content for the Better Buildings Residential Program. The Solution Centermore » uses the Drupal open source content management platform to combine a variety of media in an interactive manner to make information easily accessible. Developers designed a unique taxonomy to organize and manage content. That taxonomy was translated into web-based modules that allow users to rapidly traverse structured content with related topics, and media. We will present information on the current design of the Solution Center and the underlying technology used to manage the content. The paper will explore development of features, such as “Field Kits” that allow users to bundle and save content for quick access, along with the ability to export PDF versions of content. Finally, we will discuss development of an Android based mobile application, and a visualization tool for interacting with Building Science Publications that allows the user to dynamically search the entire Building America Library.« less
Marino, Christopher J; Mahan, Robert R
2005-01-01
The nutrition label format currently used by consumers to make dietary-related decisions presents significant information-processing demands for integration-based decisions; however, those demands were not considered as primary factors when the format was adopted. Labels designed in accordance with known principles of cognitive psychology might enhance the kind of decision making that food labeling was intended to facilitate. Three experiments were designed on the basis of the proximity compatibility principle (PCP) to investigate the relationship between nutrition label format and decision making; the experiments involved two types of integration decisions and one type of filtering decision. Based on the PCP, decision performance was measured to test the overall hypothesis that matched task-display tandems would result in better decision performance than would mismatched tandems. In each experiment, a statistically significant increase in mean decision performance was found when the display design was cognitively matched to the demands of the task. Combined, the results from all three experiments support the general hypothesis that task-display matching is a design principle that may enhance the utility of nutrition labeling in nutrition-related decision making. Actual or potential applications of this research include developing robust display solutions that aid in less effortful assimilation of nutrition-related information for consumers.
Jin, Wen; Jiang, Hai; Liu, Yimin; Klampfl, Erica
2017-01-01
Discrete choice experiments have been widely applied to elicit behavioral preferences in the literature. In many of these experiments, the alternatives are named alternatives, meaning that they are naturally associated with specific names. For example, in a mode choice study, the alternatives can be associated with names such as car, taxi, bus, and subway. A fundamental issue that arises in stated choice experiments is whether to treat the alternatives' names as labels (that is, labeled treatment), or as attributes (that is, unlabeled treatment) in the design as well as the presentation phases of the choice sets. In this research, we investigate the impact of labeled versus unlabeled treatments of alternatives' names on the outcome of stated choice experiments, a question that has not been thoroughly investigated in the literature. Using results from a mode choice study, we find that the labeled or the unlabeled treatment of alternatives' names in either the design or the presentation phase of the choice experiment does not statistically affect the estimates of the coefficient parameters. We then proceed to measure the influence toward the willingness-to-pay (WTP) estimates. By using a random-effects model to relate the conditional WTP estimates to the socioeconomic characteristics of the individuals and the labeled versus unlabeled treatments of alternatives' names, we find that: a) Given the treatment of alternatives' names in the presentation phase, the treatment of alternatives' names in the design phase does not statistically affect the estimates of the WTP measures; and b) Given the treatment of alternatives' names in the design phase, the labeled treatment of alternatives' names in the presentation phase causes the corresponding WTP estimates to be slightly higher.
Jin, Wen; Jiang, Hai; Liu, Yimin; Klampfl, Erica
2017-01-01
Discrete choice experiments have been widely applied to elicit behavioral preferences in the literature. In many of these experiments, the alternatives are named alternatives, meaning that they are naturally associated with specific names. For example, in a mode choice study, the alternatives can be associated with names such as car, taxi, bus, and subway. A fundamental issue that arises in stated choice experiments is whether to treat the alternatives’ names as labels (that is, labeled treatment), or as attributes (that is, unlabeled treatment) in the design as well as the presentation phases of the choice sets. In this research, we investigate the impact of labeled versus unlabeled treatments of alternatives’ names on the outcome of stated choice experiments, a question that has not been thoroughly investigated in the literature. Using results from a mode choice study, we find that the labeled or the unlabeled treatment of alternatives’ names in either the design or the presentation phase of the choice experiment does not statistically affect the estimates of the coefficient parameters. We then proceed to measure the influence toward the willingness-to-pay (WTP) estimates. By using a random-effects model to relate the conditional WTP estimates to the socioeconomic characteristics of the individuals and the labeled versus unlabeled treatments of alternatives’ names, we find that: a) Given the treatment of alternatives’ names in the presentation phase, the treatment of alternatives’ names in the design phase does not statistically affect the estimates of the WTP measures; and b) Given the treatment of alternatives’ names in the design phase, the labeled treatment of alternatives’ names in the presentation phase causes the corresponding WTP estimates to be slightly higher. PMID:28806764
Sadygov, Rovshan G.; Zhao, Yingxin; Haidacher, Sigmund J.; Starkey, Jonathan M.; Tilton, Ronald G.; Denner, Larry
2010-01-01
We describe a method for ratio estimations in 18O-water labeling experiments acquired from low resolution isotopically resolved data. The method is implemented in a software package specifically designed for use in experiments making use of zoom-scan mode data acquisition. Zoom-scan mode data allows commonly used ion trap mass spectrometers to attain isotopic resolution, which make them amenable to use in labeling schemes such as 18O-water labeling, but algorithms and software developed for high resolution instruments may not be appropriate for the lower resolution data acquired in zoom-scan mode. The use of power spectrum analysis is proposed as a general approach which may be uniquely suited to these data types. The software implementation uses power spectrum to remove high-frequency noise, and band-filter contributions from co-eluting species of differing charge states. From the elemental composition of a peptide sequence we generate theoretical isotope envelopes of heavy-light peptide pairs in five different ratios; these theoretical envelopes are correlated with the filtered experimental zoom scans. To automate peptide quantification in high-throughput experiments, we have implemented our approach in a computer program, MassXplorer. We demonstrate the application of MassXplorer to two model mixtures of known proteins, and to a complex mixture of mouse kidney cortical extract. Comparison with another algorithm for ratio estimations demonstrates the increased precision and automation of MassXplorer. PMID:20568695
Surface plasmon resonance label-free monitoring of antibody antigen interactions in real time
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kausaite, A.; van Dijk, M.; Castrop, J.
2007-01-01
Detection of biologically active compounds is one of the most important topics in molecular biology and biochemistry. One of the most promising detection methods is based on the application of surface plasmon resonance for label-free detection of biologically active compounds. This method allows one to monitor binding events in real time without labeling. The system can therefore be used to determine both affinity and rate constants for interactions between various types of molecules. Here, we describe the application of a surface plasmon resonance biosensor for label-free investigation of the interaction between an immobilized antigen bovine serum albumin (BSA) and antibodymore » rabbit anti-cow albumin IgG1 (anti-BSA). The formation of a self-assembled monolayer (SAM) over a gold surface is introduced into this laboratory training protocol as an effective immobilization method, which is very promising in biosensing systems based on detection of affinity interactions. In the next step, covalent attachment via artificially formed amide bonds is applied for the immobilization of proteins on the formed SAM surface. These experiments provide suitable experience for postgraduate students to help them understand immobilization of biologically active materials via SAMs, fundamentals of surface plasmon resonance biosensor applications, and determination of non-covalent biomolecular interactions. The experiment is designed for master and/or Ph.D. students. In some particular cases, this protocol might be adoptable for bachelor students that already have completed an extended biochemistry program that included a background in immunology.« less
Salud Tiene Sabor: a model for healthier restaurants in a Latino community.
Nevarez, Carmen R; Lafleur, Mariah S; Schwarte, Liz U; Rodin, Beth; de Silva, Pri; Samuels, Sarah E
2013-03-01
The prevalence of overweight and obesity in children has risen nationally in recent decades, and is exceptionally high in low-income communities of color such as South Los Angeles CA. Independently owned restaurants participating in the Salud Tiene Sabor program at ethnic foods marketplace Mercado La Paloma in South Los Angeles are responding to the childhood obesity crisis by posting calories for menu items and providing nutrition information to patrons. To evaluate whether menu labeling and nutrition information at point of purchase have an influence on availability of healthy food options, patron awareness of calorie information, and restaurant owners' support of the program. A case-study design using mixed methods included restaurant owner and stakeholder interviews, patron surveys, and environmental assessments. Data were collected using originally designed tools, and analyzed in 2009-2011. Healthy eating options were available at the Mercado La Paloma; restaurant owners and the larger community supported the Salud Tiene Sabor program; 33% of patrons reported calorie information-influenced purchase decisions. Owners of independent restaurants have an important role in improving access to healthy foods in low-income, Latino communities. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.
Glenn, Andrea L
2018-04-16
A growing body of evidence suggests that biological factors such as genes, hormone levels, brain structure, and brain functioning influence the development and trajectory of conduct problems in youth. In addition, biological factors affect how individuals respond to the environment, including how individuals respond to programs designed to prevent or treat conduct problems. Programs designed to reduce behavior problems in youth would have the greatest impact if they were targeted toward youth who need it the most (e.g., who are mostly likely to demonstrate persistent behavior problems) as well as youth who may benefit the most from the program. Biological information may improve our ability to make decisions about which type or level of intervention is best for a particular child, thus maximizing overall effectiveness, but it also raises a number of ethical concerns. These include the idea that we may be providing fewer services to some youth based on biological factors, and that information about biological risk could potentially lead to discrimination or labeling. In this article, I discuss the risks and benefits of using biological information to individualize interventions for youth with conduct problems. Copyright © 2018 Elsevier Ltd. All rights reserved.
Huan, Tao; Li, Liang
2015-07-21
Generating precise and accurate quantitative information on metabolomic changes in comparative samples is important for metabolomics research where technical variations in the metabolomic data should be minimized in order to reveal biological changes. We report a method and software program, IsoMS-Quant, for extracting quantitative information from a metabolomic data set generated by chemical isotope labeling (CIL) liquid chromatography mass spectrometry (LC-MS). Unlike previous work of relying on mass spectral peak ratio of the highest intensity peak pair to measure relative quantity difference of a differentially labeled metabolite, this new program reconstructs the chromatographic peaks of the light- and heavy-labeled metabolite pair and then calculates the ratio of their peak areas to represent the relative concentration difference in two comparative samples. Using chromatographic peaks to perform relative quantification is shown to be more precise and accurate. IsoMS-Quant is integrated with IsoMS for picking peak pairs and Zero-fill for retrieving missing peak pairs in the initial peak pairs table generated by IsoMS to form a complete tool for processing CIL LC-MS data. This program can be freely downloaded from the www.MyCompoundID.org web site for noncommercial use.
Health warning labels for alcoholic beverages in Canada.
Smart, R G
1990-01-01
This paper reviews the background and rationale for health warning labels for alcoholic beverages. They have been recently approved for the United States. Mexico and Colombia already have such labels. However, Canadian health officials seem reluctant to require them unless the alcohol industry agrees. Arguments against labels (i.e. that they detract from other efforts, are misguided or ineffective) are not convincing. Evidence from research on health warnings on cigarettes and prescription and non-prescription drugs shows that labels can be effective if well designed. Special problems in having bilingual labels may exist but could be overcome. Canada should have health warning labels on alcoholic beverages as soon as possible.
33 CFR 150.628 - How must the operator label, tag, and mark a container of hazardous material?
Code of Federal Regulations, 2010 CFR
2010-07-01
... Workplace Safety and Health Hazard Communication Program § 150.628 How must the operator label, tag, and..., reactive and other special condition hazard warnings. The only exception is for portable containers that...
7 CFR 205.302 - Calculating the percentage of organically produced ingredients.
Code of Federal Regulations, 2011 CFR
2011-01-01
... the finished product. (2) Dividing the fluid volume of all organic ingredients (excluding water and...) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Phelps, Michael E.
2009-09-01
Radiotracer techniques are used in environmental sciences, geology, biology and medicine. Radiotracers with Positron Emission Tomography (PET) provided biological examinations of ~3 million patients 2008. Despite the success of positron labeled tracers in many sciences, there is limited access in an affordable and convenient manner to develop and use new tracers. Integrated microfluidic chips are a new technology well matched to the concentrations of tracers. Our goal is to develop microfluidic chips and new synthesis approaches to enable wide dissemination of diverse types of tracers at low cost, and to produce new generations of radiochemists for which there are manymore » unfilled jobs. The program objectives are to: 1. Develop an integrated microfluidic platform technology for synthesizing and 18F-labeling diverse arrays of different classes of molecules. 2. Incorporate microfluidic chips into small PC controlled devices (“Synthesizer”) with a platform interfaced to PC for electronic and fluid input/out control. 3. Establish a de-centralized model with Synthesizers for discovering and producing molecular imaging probes, only requiring delivery of inexpensive [18F]fluoride ion from commercial PET radiopharmacies vs the centralized approach of cyclotron facilities synthesizing and shipping a few different types of 18F-probes. 4. Develop a position sensitive avalanche photo diode (PSAPD) camera for beta particles embedded in a microfluidic chip for imaging and measuring transport and biochemical reaction rates to valid new 18F-labeled probes in an array of cell cultures. These objectives are met within a research and educational program integrating radio-chemistry, synthetic chemistry, biochemistry, engineering and biology in the Crump Institute for Molecular Imaging. The Radiochemistry Training Program exposes PhD and post doctoral students to molecular imaging in vitro in cells and microorganisms in microfluidic chips and in vivo with PET, from new technologies for radiochemistry (macro to micro levels), biochemistry and biology to imaging principles, tracer kinetics, pharmacokinetics and biochemical assays. New generations of radiochemists will be immersed in the biochemistry and biology for which their labeled probes are being developed for assays of these processes. In this program engineers and radio-chemists integrate the principles of microfluidics and radiolabeling along with proper system design and chemistry rule sets to yield Synthesizers enabling biological and pharmaceutical scientists to develop diverse arrays of probes to pursue their interests. This progression would allow also radiochemists to focus on the further evolution of rapid, high yield synthetic reactions with new enabling technologies, rather than everyday production of radiotracers that should be done by technologists. The invention of integrated circuits in electronics established a platform technology that allowed an evolution of ideas and applications far beyond what could have been imagined at the beginning. Rather than provide a technology for the solution to a single problem, it is hoped that microfluidic radiochemistry will be an enabling platform technology for others to solve many problems. As part of this objective, another program goal is to commercialize the technologies that come from this work so that they can be provided to others who wish to use it.« less
United States Food and Drug Administration Product Label Changes
Sung, Julie C.; Stein-Gold, Linda; Goldenberg, Gary
2017-01-01
Once a drug has been approved by the United States Food and Drug Administration and is on the market, the Food and Drug Administration communicates new safety information through product label changes. Most of these label changes occur after a spontaneous report to either the drug manufacturing companies or the Food and Drug Administration MedWatch program. As a result, 400 to 500 label changes occur every year. Actinic keratosis treatments exemplify the commonality of label changes throughout the postmarket course of a drug. Diclofenac gel, 5-fluorouracil cream, imiquimod, and ingenol mebutate are examples of actinic keratosis treatments that have all undergone at least one label revision. With the current system of spontaneous reports leading to numerous label changes, each occurrence does not necessarily signify a radical change in the safety of a drug. PMID:28367259
United States Food and Drug Administration Product Label Changes
Sung, Julie C.; Stein-Gold, Linda; Goldenberg, Gary
2016-01-01
Once a drug has been approved by the United States Food and Drug Administration and is on the market, the Food and Drug Administration communicates new safety information through product label changes. Most of these label changes occur after a spontaneous report to either the drug manufacturing companies or the Food and Drug Administration MedWatch program. As a result, 400 to 500 label changes occur every year. Actinic keratosis treatments exemplify the commonality of label changes throughout the postmarket course of a drug. Diclofenac gel, 5-fluorouracil cream, imiquimod, and ingenol mebutate are examples of actinic keratosis treatments that have all undergone at least one label revision. With the current system of spontaneous reports leading to numerous label changes, each occurrence does not necessarily signify a radical change in the safety of a drug. PMID:26962391
United States Food and Drug Administration Product Label Changes.
Kircik, Leon; Sung, Julie C; Stein-Gold, Linda; Goldenberg, Gary
2017-02-01
Once a drug has been approved by the United States Food and Drug Administration and is on the market, the Food and Drug Administration communicates new safety information through product label changes. Most of these label changes occur after a spontaneous report to either the drug manufacturing companies or the Food and Drug Administration MedWatch program. As a result, 400 to 500 label changes occur every year. Actinic keratosis treatments exemplify the commonality of label changes throughout the postmarket course of a drug. Diclofenac gel, 5-fluorouracil cream, imiquimod, and ingenol mebutate are examples of actinic keratosis treatments that have all undergone at least one label revision. With the current system of spontaneous reports leading to numerous label changes, each occurrence does not necessarily signify a radical change in the safety of a drug.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-11
... article which consumes, or is designed to consume energy and which, to any significant extent, is...) and has discretion to require comparative information on the label. V. FTC's Advance Notice of... appear on a newly designed EnergyGuide label affixed to the product itself. Finally, the proposed...
Hashimoto, Shinichi; Ogihara, Hiroyuki; Suenaga, Masato; Fujita, Yusuke; Terai, Shuji; Hamamoto, Yoshihiko; Sakaida, Isao
2017-08-01
Visibility in capsule endoscopic images is presently evaluated through intermittent analysis of frames selected by a physician. It is thus subjective and not quantitative. A method to automatically quantify the visibility on capsule endoscopic images has not been reported. Generally, when designing automated image recognition programs, physicians must provide a training image; this process is called supervised learning. We aimed to develop a novel automated self-learning quantification system to identify visible areas on capsule endoscopic images. The technique was developed using 200 capsule endoscopic images retrospectively selected from each of three patients. The rate of detection of visible areas on capsule endoscopic images between a supervised learning program, using training images labeled by a physician, and our novel automated self-learning program, using unlabeled training images without intervention by a physician, was compared. The rate of detection of visible areas was equivalent for the supervised learning program and for our automatic self-learning program. The visible areas automatically identified by self-learning program correlated to the areas identified by an experienced physician. We developed a novel self-learning automated program to identify visible areas in capsule endoscopic images.
The effectiveness of nutrition education and labeling in Dutch supermarkets.
Steenhuis, Ingrid; van Assema, Patricia; van Breukelen, Gerard; Glanz, Karen
2004-01-01
Nutrition education and labeling may help consumers to eat less fat. The purpose of this study is to assess the effect of nutrition education with and without shelf labeling on reduced fat intake in Dutch supermarkets. The design consisted of a randomized, pretest-posttest, experimental control group design. In total, 2203 clients of 13 supermarkets were included in the sample. Total fat intake of clients and behavioral determinants of eating less fat were measured by a questionnaire. A mixed-effect regression model was used for the analysis. No significant effects were found for the educational intervention, alone or with the labeling, on total fat intake and the psychosocial determinants of eating less fat. Nutrition education and labeling of low-fat food products in supermarkets did not prove to be effective strategies. The fact that the supermarket is a highly competitive environment may have accounted for this lack of effect.
Mays, Darren; Villanti, Andrea; Niaura, Raymond S; Lindblom, Eric N; Strasser, Andrew A
2017-12-13
This study was a 3 (Brand: Blu, MarkTen, Vuse) by 3 (Warning Size: 20%, 30%, or 50% of advertisement surface) by 2 (Warning Background: White, Red) experimental investigation of the effects of electronic cigarette (e-cigarette) warning label design features. Young adults aged 18-30 years (n = 544) were recruited online, completed demographic and tobacco use history measures, and randomized to view e-cigarette advertisements with warning labels that varied by the experimental conditions. Participants completed a task assessing self-reported visual attention to advertisements with a-priori regions of interest defined around warning labels. Warning message recall and perceived addictiveness of e-cigarettes were assessed post-exposure. Approximately half of participants reported attending to warning labels and reported attention was greater for warnings on red versus white backgrounds. Recall of the warning message content was also greater among those reporting attention to the warning label. Overall, those who viewed warnings on red backgrounds reported lower perceived addictiveness than those who viewed warnings on white backgrounds, and e-cigarette users reported lower perceived addictiveness than non-users. Among e-cigarette users, viewing warnings on white backgrounds produced perceptions more similar to non-users. Greater recall was significantly correlated with greater perceived addictiveness. This study provides some of the first evidence that e-cigarette warning label design features including size and coloring affect self-reported attention and content recall.
Explaining Verification Conditions
NASA Technical Reports Server (NTRS)
Deney, Ewen; Fischer, Bernd
2006-01-01
The Hoare approach to program verification relies on the construction and discharge of verification conditions (VCs) but offers no support to trace, analyze, and understand the VCs themselves. We describe a systematic extension of the Hoare rules by labels so that the calculus itself can be used to build up explanations of the VCs. The labels are maintained through the different processing steps and rendered as natural language explanations. The explanations can easily be customized and can capture different aspects of the VCs; here, we focus on their structure and purpose. The approach is fully declarative and the generated explanations are based only on an analysis of the labels rather than directly on the logical meaning of the underlying VCs or their proofs. Keywords: program verification, Hoare calculus, traceability.
Yang, Lawrence H; Singla, Daisy R
2011-11-01
Indigenous interpretations of mental illness might negatively impact treatment adherence. However, psychiatric "labeling" potentially leads to stigma among Chinese groups, thus encouraging the use of indigenous idioms. We examined how relatives' use of indigenous labeling varied with the consumers' experience of illness and whether indigenous labeling protected relatives from internalized and experienced forms of stigma. Forty-nine relatives of Chinese-immigrant consumers with psychosis were sampled. Although consumers had progressed to the middle stages of psychosis, 39% of relatives used indigenous idioms to label psychosis. Indigenous labeling decreased when illness duration increased and when visual hallucinations were present. Indigenous labeling further predicted lower internalized stigma among relatives. Relatives who used indigenous labeling also reported fewer indirect stigma experiences, although not after controlling for illness severity. The frequency of direct discrimination among relatives did not differ by labeling. These forms of felt stigma might be embedded into relatives' psychoeducation programs to mitigate adverse consequences of psychiatric labeling.
ERIC Educational Resources Information Center
Shurpik, Anton J.; Beim, Howard J.
1982-01-01
Discusses characteristics of materials and labels used by the Department of Transportation, including label design and color: red (flammable and spontaneously combustible), white/yellow (radioactives), orange (explosives), white (poisons), yellow (oxidizers), green (non-flammable gas), black/white (corrosive), blue (dangerous when wet). Includes…
21 CFR 111.20 - What design and construction requirements apply to your physical plant?
Code of Federal Regulations, 2012 CFR
2012-04-01
... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Physical Plant and Grounds... use in the manufacture, packaging, labeling, or holding of dietary supplements must: (a) Be suitable... dietary supplements during manufacturing, packaging, labeling, or holding; (c) Permit the use of proper...
21 CFR 111.20 - What design and construction requirements apply to your physical plant?
Code of Federal Regulations, 2014 CFR
2014-04-01
... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Physical Plant and Grounds... use in the manufacture, packaging, labeling, or holding of dietary supplements must: (a) Be suitable... dietary supplements during manufacturing, packaging, labeling, or holding; (c) Permit the use of proper...
Focus on Food Labeling. An FDA Consumer Special Report.
ERIC Educational Resources Information Center
Food and Drug Administration (DHHS/PHS), Washington, DC.
This special issue is designed for those who want to know all they can about the new federal requirements for nutrition information on food labels. Nine articles are included. "Good Reading for Good Eating" (Paula Kurtzweil) addresses mandatory nutrition labeling, the nutrition panel, nutrient content and health claims, and ingredient…
NASA Technical Reports Server (NTRS)
Palmer, W. F.; Magness, E. R. (Principal Investigator)
1981-01-01
The reformatted spring small grains labeling procedure is designed to be used for assigning crop identification labels to a predetermined and selected number of dots. The development and description of this procedure is presented.
21 CFR 201.313 - Estradiol labeling.
Code of Federal Regulations, 2014 CFR
2014-04-01
... Pharmacopeia under the designation “Alpha Estradiol.” The substance should no longer be referred to in drug labeling as “Alpha Estradiol.” The Food and Drug Administration would not object to label references to the... referred to the presence of “Estradiol (formerly known as Alpha Estradiol).” ...
21 CFR 201.313 - Estradiol labeling.
Code of Federal Regulations, 2012 CFR
2012-04-01
... Pharmacopeia under the designation “Alpha Estradiol.” The substance should no longer be referred to in drug labeling as “Alpha Estradiol.” The Food and Drug Administration would not object to label references to the... referred to the presence of “Estradiol (formerly known as Alpha Estradiol).” ...
21 CFR 201.313 - Estradiol labeling.
Code of Federal Regulations, 2013 CFR
2013-04-01
... Pharmacopeia under the designation “Alpha Estradiol.” The substance should no longer be referred to in drug labeling as “Alpha Estradiol.” The Food and Drug Administration would not object to label references to the... referred to the presence of “Estradiol (formerly known as Alpha Estradiol).” ...
21 CFR 201.313 - Estradiol labeling.
Code of Federal Regulations, 2011 CFR
2011-04-01
... Pharmacopeia under the designation “Alpha Estradiol.” The substance should no longer be referred to in drug labeling as “Alpha Estradiol.” The Food and Drug Administration would not object to label references to the... referred to the presence of “Estradiol (formerly known as Alpha Estradiol).” ...
21 CFR 201.313 - Estradiol labeling.
Code of Federal Regulations, 2010 CFR
2010-04-01
... Pharmacopeia under the designation “Alpha Estradiol.” The substance should no longer be referred to in drug labeling as “Alpha Estradiol.” The Food and Drug Administration would not object to label references to the... referred to the presence of “Estradiol (formerly known as Alpha Estradiol).” ...
40 CFR 156.159 - Compliance date.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Compliance date. 156.159 Section 156.159 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.159 Compliance date. Any pesticide product...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Labeling. 85.505 Section 85.505 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Exemption of Aftermarket Conversions From Tampering Prohibition § 85.505...
Mizukami, Shin; Hori, Yuichiro; Kikuchi, Kazuya
2014-01-21
The use of genetic engineering techniques allows researchers to combine functional proteins with fluorescent proteins (FPs) to produce fusion proteins that can be visualized in living cells, tissues, and animals. However, several limitations of FPs, such as slow maturation kinetics or issues with photostability under laser illumination, have led researchers to examine new technologies beyond FP-based imaging. Recently, new protein-labeling technologies using protein/peptide tags and tag-specific probes have attracted increasing attention. Although several protein-labeling systems are com mercially available, researchers continue to work on addressing some of the limitations of this technology. To reduce the level of background fluorescence from unlabeled probes, researchers have pursued fluorogenic labeling, in which the labeling probes do not fluoresce until the target proteins are labeled. In this Account, we review two different fluorogenic protein-labeling systems that we have recently developed. First we give a brief history of protein labeling technologies and describe the challenges involved in protein labeling. In the second section, we discuss a fluorogenic labeling system based on a noncatalytic mutant of β-lactamase, which forms specific covalent bonds with β-lactam antibiotics such as ampicillin or cephalosporin. Based on fluorescence (or Förster) resonance energy transfer and other physicochemical principles, we have developed several types of fluorogenic labeling probes. To extend the utility of this labeling system, we took advantage of a hydrophobic β-lactam prodrug structure to achieve intracellular protein labeling. We also describe a small protein tag, photoactive yellow protein (PYP)-tag, and its probes. By utilizing a quenching mechanism based on close intramolecular contact, we incorporated a turn-on switch into the probes for fluorogenic protein labeling. One of these probes allowed us to rapidly image a protein while avoiding washout. In the future, we expect that protein-labeling systems with finely designed probes will lead to novel methodologies that allow researchers to image biomolecules and to perturb protein functions.
Development of land based radar polarimeter processor system
NASA Technical Reports Server (NTRS)
Kronke, C. W.; Blanchard, A. J.
1983-01-01
The processing subsystem of a land based radar polarimeter was designed and constructed. This subsystem is labeled the remote data acquisition and distribution system (RDADS). The radar polarimeter, an experimental remote sensor, incorporates the RDADS to control all operations of the sensor. The RDADS uses industrial standard components including an 8-bit microprocessor based single board computer, analog input/output boards, a dynamic random access memory board, and power supplis. A high-speed digital electronics board was specially designed and constructed to control range-gating for the radar. A complete system of software programs was developed to operate the RDADS. The software uses a powerful real time, multi-tasking, executive package as an operating system. The hardware and software used in the RDADS are detailed. Future system improvements are recommended.
Gamalo-Siebers, Margaret; Savic, Jasmina; Basu, Cynthia; Zhao, Xin; Gopalakrishnan, Mathangi; Gao, Aijun; Song, Guochen; Baygani, Simin; Thompson, Laura; Xia, H Amy; Price, Karen; Tiwari, Ram; Carlin, Bradley P
2017-07-01
Children represent a large underserved population of "therapeutic orphans," as an estimated 80% of children are treated off-label. However, pediatric drug development often faces substantial challenges, including economic, logistical, technical, and ethical barriers, among others. Among many efforts trying to remove these barriers, increased recent attention has been paid to extrapolation; that is, the leveraging of available data from adults or older age groups to draw conclusions for the pediatric population. The Bayesian statistical paradigm is natural in this setting, as it permits the combining (or "borrowing") of information across disparate sources, such as the adult and pediatric data. In this paper, authored by the pediatric subteam of the Drug Information Association Bayesian Scientific Working Group and Adaptive Design Working Group, we develop, illustrate, and provide suggestions on Bayesian statistical methods that could be used to design improved pediatric development programs that use all available information in the most efficient manner. A variety of relevant Bayesian approaches are described, several of which are illustrated through 2 case studies: extrapolating adult efficacy data to expand the labeling for Remicade to include pediatric ulcerative colitis and extrapolating adult exposure-response information for antiepileptic drugs to pediatrics. Copyright © 2017 John Wiley & Sons, Ltd.
38 CFR 41.520 - Major program determination.
Code of Federal Regulations, 2010 CFR
2010-07-01
... (CONTINUED) AUDITS OF STATES, LOCAL GOVERNMENTS, AND NON-PROFIT ORGANIZATIONS Auditors § 41.520 Major program determination. (a) General. The auditor shall use a risk-based approach to determine which Federal programs are... auditor shall identify the larger Federal programs, which shall be labeled Type A programs. Type A...
29 CFR 99.520 - Major program determination.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Auditors § 99.520 Major program determination. (a) General. The auditor shall use a risk-based approach to... followed. (b) Step 1. (1) The auditor shall identify the larger Federal programs, which shall be labeled... size of Type A programs, the auditor shall consider this Federal program as a Type A program and...
Code of Federal Regulations, 2011 CFR
2011-07-01
... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable containers...
Code of Federal Regulations, 2014 CFR
2014-07-01
... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable containers...
Code of Federal Regulations, 2013 CFR
2013-07-01
... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable containers...
Code of Federal Regulations, 2012 CFR
2012-07-01
... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable containers...
... Department of Health & Human Services Health Topics The Science Grants and Training News and Events About NHLBI Home » Health Information for the Public » Educational Campaigns & Programs » We Can! » Eat Right » Use the Nutrition Facts Label Ways to Enhance Children's Activity & Nutrition About ...
The Effective Use of Labels in Strategic Communication
2015-06-12
Images and symbols can achieve huge impact in communicating narratives, themes, and messages” (Farwell 2012, 79). These images and the associated......Effective Use of Labels in Strategic Communication 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) MAJ
10 CFR 431.31 - Labeling requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 3 2010-01-01 2010-01-01 false Labeling requirements. 431.31 Section 431.31 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL... be marked clearly with the following information: (i) The motor's nominal full load efficiency (as of...
Code of Federal Regulations, 2011 CFR
2011-04-01
... OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF MALT BEVERAGES Labeling Requirements for Malt... volume shall bear the class designation “malt beverage,” or “cereal beverage,” or “near beer.” If the designation “near beer” is used, both words must appear in the same size and style of type, in the same color...
Code of Federal Regulations, 2014 CFR
2014-04-01
... OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF MALT BEVERAGES Labeling Requirements for Malt... volume shall bear the class designation “malt beverage,” or “cereal beverage,” or “near beer.” If the designation “near beer” is used, both words must appear in the same size and style of type, in the same color...
Code of Federal Regulations, 2010 CFR
2010-04-01
... OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF MALT BEVERAGES Labeling Requirements for Malt... volume shall bear the class designation “malt beverage,” or “cereal beverage,” or “near beer.” If the designation “near beer” is used, both words must appear in the same size and style of type, in the same color...
Code of Federal Regulations, 2013 CFR
2013-04-01
... OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF MALT BEVERAGES Labeling Requirements for Malt... volume shall bear the class designation “malt beverage,” or “cereal beverage,” or “near beer.” If the designation “near beer” is used, both words must appear in the same size and style of type, in the same color...
Code of Federal Regulations, 2012 CFR
2012-04-01
... OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF MALT BEVERAGES Labeling Requirements for Malt... volume shall bear the class designation “malt beverage,” or “cereal beverage,” or “near beer.” If the designation “near beer” is used, both words must appear in the same size and style of type, in the same color...
7 CFR Appendix C to Part 225 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2010 CFR
2010-01-01
... calculated using the Food Buying Guide for Child Nutrition Programs (Program Aid Number 1331). 5. In the... Marine Fisheries Service of the USDC, Food and Drug Administration, or the Department of Justice for...
7 CFR Appendix C to Part 226 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2010 CFR
2010-01-01
... calculated using the Food Buying Guide for Child Nutrition Programs (Program Aid Number 1331). 5. In the... Marine Fisheries Services of the USDC, Food and Drug Administration, or the Department of Justice for...
7 CFR Appendix C to Part 210 - Child Nutrition Labeling Program
Code of Federal Regulations, 2010 CFR
2010-01-01
... calculated using the Food Buying Guide for Child Nutrition Programs (Program AID Number 1331). 5. In the... Drug Administration, or the Department of Justice for action against the company. Any or all of the...
Label-Free Aptasensors for the Detection of Mycotoxins
Rhouati, Amina; Catanante, Gaelle; Nunes, Gilvanda; Hayat, Akhtar; Marty, Jean-Louis
2016-01-01
Various methodologies have been reported in the literature for the qualitative and quantitative monitoring of mycotoxins in food and feed samples. Based on their enhanced specificity, selectivity and versatility, bio-affinity assays have inspired many researchers to develop sensors by exploring bio-recognition phenomena. However, a significant problem in the fabrication of these devices is that most of the biomolecules do not generate an easily measurable signal upon binding to the target analytes, and signal-generating labels are required to perform the measurements. In this context, aptamers have been emerged as a potential and attractive bio-recognition element to design label-free aptasensors for various target analytes. Contrary to other bioreceptor-based approaches, the aptamer-based assays rely on antigen binding-induced conformational changes or oligomerization states rather than binding-assisted changes in adsorbed mass or charge. This review will focus on current designs in label-free conformational switchable design strategies, with a particular focus on applications in the detection of mycotoxins. PMID:27999353
Consumer Understanding and Use of Food and Nutrition Labeling in Turkey
ERIC Educational Resources Information Center
Besler, Halit Tanju; Buyuktuncer, Zehra; Uyar, Muhemmed Fatih
2012-01-01
Objectives: To determine patterns of food and nutrition labels use by Turkish consumers, and examine constraints on the use of this information. Design: Cross-sectional survey. Setting: Twenty-six regions of Turkey. Participants: Consumers (n = 1,536), aged 12-56 years. Variables measured: Level of interest in food and nutrition labels, the…
Nutrition Marketing on Food Labels
ERIC Educational Resources Information Center
Colby, Sarah E.; Johnson, LuAnn; Scheett, Angela; Hoverson, Bonita
2010-01-01
Objective: This research sought to determine how often nutrition marketing is used on labels of foods that are high in saturated fat, sodium, and/or sugar. Design and Setting: All items packaged with food labels (N = 56,900) in all 6 grocery stores in Grand Forks, ND were surveyed. Main Outcome Measure(s): Marketing strategy, nutrient label…
A free-air system for long-term stable carbon isotope labeling of adult forest trees
Stable carbon (C) isotopes, in particular employed in labeling experiments, are an ideal tool to broaden our understanding of C dynamics in trees and forest ecosystems. Here, we present a free-air exposure system, named isoFACE, designed for long-term stable C isotope labeling in...
Determinants of Food Label Use among Supermarket Shoppers: A Singaporean Perspective
ERIC Educational Resources Information Center
Vijaykumar, Santosh; Lwin, May O.; Chao, Jiang; Au, Cyndy
2013-01-01
Objective: Examining factors influencing food label use among Singapore's supermarket shoppers using the Theory of Planned Behavior. Design: A point-of-purchase survey among general shoppers in 2 supermarkets. Setting: Singapore, a country whose population is exposed to a wide range of food labeling formats because of the import-dependent nature…
50 CFR 23.71 - How can I trade internationally in sturgeon caviar?
Code of Federal Regulations, 2014 CFR
2014-10-01
...-export sturgeon caviar only if labels are affixed to containers prior to export or re-export in... container. In the United States, the design of the label will be determined by the labeler in accordance with the requirements of this section. (ii) Primary container means any container (tin, jar, pail or...
Human factors in labeling and training for home healthcare technology.
Patterson, Patricia A
2010-01-01
In this article, Patricia A. Patterson, a contributor to the recently-released standard ANSI/AAMI HE75:2009 Human factors engineering-Design of medical devices, highlights information from the standard important to developing labeling and training for homecare devices. She also describes one approach to developing labeling and training materials.
7 CFR 205.302 - Calculating the percentage of organically produced ingredients.
Code of Federal Regulations, 2010 CFR
2010-01-01
...) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market... percent organic,” “organic,” or “made with organic (specified ingredients or food group(s)),” or that...
7 CFR Appendix C to Part 220 - Child Nutrition (CN) Labeling Program
Code of Federal Regulations, 2010 CFR
2010-01-01
... using the Food Buying Guide for Child Nutrition Programs (Program Aid Number 1331). 5. In the event a... and AMS of the USDA, National Marine Fisheries Services of the USDC, Food and Drug Administration, or...
Biofuels, Biolubricants and the BioPreferred(SM) Program
USDA-ARS?s Scientific Manuscript database
The BioPreferred(SM) Program is a U.S. government initiative intended to encourage the development and widespread use of biofuels, biolubricants, and other biobased products in the U.S. The program consists of the preferred procurement and the voluntary labeling programs. Companies wishing to have t...
Vallance, Kate; Romanovska, Inna; Stockwell, Tim; Hammond, David; Rosella, Laura; Hobin, Erin
2018-01-01
This study aimed to refine content and design of an enhanced alcohol label to provide information that best supports informed drinking and to gauge consumer acceptability of enhanced alcohol labels among a subset of consumers. Five focus groups (n = 45) were conducted with stakeholders and the general public (age 19+) across one jurisdiction in northern Canada. Interviews were transcribed and analyzed using NVivo software. The majority of participants showed strong support for enhanced alcohol labels with an emphasis on the consumers' right to know about the health risks related to alcohol. Participants preferred larger labels that included standard drink (SD) information, national low-risk drinking guidelines presented as a chart with pictograms, cancer health messaging and a pregnancy warning. Supporting introduction of the labels with a web resource and an educational campaign was also recommended. Displaying enhanced labels on alcohol containers that include SD information, low-risk drinking guidelines and other health messaging in an accessible format may be an effective way to better inform drinkers about their consumption and increase awareness of alcohol-related health risks. Introduction of enhanced labels shows potential for consumer support. Focus group findings indicate strong support for enhanced alcohol labels displaying SD information, national drinking guidelines, health messaging and a pregnancy warning. Introduction of enhanced alcohol labels in tandem with an educational campaign may be an effective way to better inform Canadian drinkers and shows potential for consumer support. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.
Morales-González, María Fernanda; Galiano Gálvez, María Alejandra
2017-09-08
Our institution implemented the use of pre-designed labeling of intravenous drugs and fluids, administration routes and infusion pumps of to prevent medication errors. To evaluate the effectiveness of predesigned labeling in reducing medication errors in the preparation and administration stages of prescribed medication in patients hospitalized with invasive lines, and to characterize medication errors. This is a pre/post intervention study. Pre-intervention group: invasively administered dose from July 1st to December 31st, 2014, using traditional labeling (adhesive paper handwritten note). Post-intervention group: dose administered from January 1st to June 30th, 2015, using predesigned labeling (labeling with preset data-adhesive labels, color- grouped by drugs, labels with colors for invasive lines). Outcome: medication errors in hospitalized patients, as measured with notification form and record electronics. Tabulation/analysis Stata-10, with descriptive statistics, hypotheses testing, estimating risk with 95% confidence. In the pre-intervention group, 5,819 doses of drugs were administered invasively in 634 patients. Error rate of 1.4 x 1,000 administrations. The post-intervention group of 1088 doses comprised 8,585 patients with similar routes of administration. The error rate was 0.3 x 1,000 (p = 0.034). Patients receiving medication through an invasive route who did not use predesigned labeling had 4.6 times more risk of medication error than those who had used predesigned labels (95% CI: 1.25 to 25.4). The adult critically ill patient unit had the highest proportion of medication errors. The most frequent error was wrong dose administration. 41.2% produced harm to the patient. The use of predesigned labeling in invasive lines reduces errors in medication in the last two phases: preparation and administration.
RAPTOR-scan: Identifying and Tracking Objects Through Thousands of Sky Images
DOE Office of Scientific and Technical Information (OSTI.GOV)
Davidoff, Sherri; Wozniak, Przemyslaw
2004-09-28
The RAPTOR-scan system mines data for optical transients associated with gamma-ray bursts and is used to create a catalog for the RAPTOR telescope system. RAPTOR-scan can detect and track individual astronomical objects across data sets containing millions of observed points.Accurately identifying a real object over many optical images (clustering the individual appearances) is necessary in order to analyze object light curves. To achieve this, RAPTOR telescope observations are sent in real time to a database. Each morning, a program based on the DBSCAN algorithm clusters the observations and labels each one with an object identifier. Once clustering is complete, themore » analysis program may be used to query the database and produce light curves, maps of the sky field, or other informative displays.Although RAPTOR-scan was designed for the RAPTOR optical telescope system, it is a general tool designed to identify objects in a collection of astronomical data and facilitate quick data analysis. RAPTOR-scan will be released as free software under the GNU General Public License.« less
Smith, D I; Lockwood, J A
2003-04-01
The possibility of horizontal transmission of diflubenzuron and fipronil was assessed in rangeland grasshoppers. Laboratory studies of Melanoplus sanguinipes demonstrated that fipronil was horizontally transferred at lethal levels (p < 0.05) via cannibalism through four passages when the initial dose applied to a food source was 250 times the label rate for rangeland grasshopper and locust control (label rate is 4 g AI/ha). Mortality was 100% on the first three passages through cannibalism. At 25 and 1 times the label rate, fipronil was lethal (p < 0.05) only on the first cannibalistic passage. Diflubenzuron generated significant (p < 0.05) mortality via horizontal transmission through two passages when the initial dose applied to a food source was 2,000 times the label rate for rangeland grasshopper control (label rate is 8.71 g AI/ha). There was 100% mortality in the first passage via cannibalism. At 250 and 25 times the label rate, diflubenzuron was lethal only on the first cannibalistic passage. Field applications of these two acridicides followed by collection of cadavers (Amphitornus coloradus and Ageneotettix deorum) that were fed to M. sanguinipes in the laboratory revealed that fipronil (25 times the label rate) generated significant (p < 0.05) mortality through two passages and diflubenzuron (label rate) caused no mortality via necrophagy. Tenebrionid beetles fed grasshopper cadavers collected from the field application of fipronil yielded 45% mortality, compared with 25% mortality in the controls. These findings suggest that horizontal and trophic transfer probably play a nominal ecotoxicological role in rangeland grasshopper control programs with diflubenzuron, but the transfer of fipronil to grasshoppers, scavengers, and natural enemies via necrophagy may increase both the efficacy of control programs and their environmental affects.
Labelling effects and adolescent responses to peers with depression: an experimental investigation.
Dolphin, Louise; Hennessy, Eilis
2017-06-24
The impact of illness labels on the stigma experiences of individuals with mental health problems is a matter of ongoing debate. Some argue that labels have a negative influence on judgments and should be avoided in favour of information emphasising the existence of a continuum of mental health/illness. Others believe that behavioral symptoms are more powerful influencers of stigma than labels. The phenomenon has received little attention in adolescent research, despite the critical importance of the peer group at this developmental stage. This study employs a novel experimental design to examine the impact of the depression label and continuum information on adolescents' responses to peers with depression. Participants were 156 adolescents, 76 male, 80 female (M = 16.25 years; SD = .361), assigned to one of three conditions (Control, Label, Continuum). Participants respond to four audio-visual vignette characters (two clinically depressed) on three occasions. Outcome measures included judgment of the mental health of the vignette characters and emotional responses to them. Neither the provision of a depression label or continuum information influenced perceptions of the mental health of the characters in the audio-visual vignettes or participants' emotional responses to them. The findings have implications for the design of interventions to combat depression stigma with adolescents. Interventions should not necessarily target perceptions of psychiatric labels, but rather perceptions of symptomatic behaviour.
Code of Federal Regulations, 2010 CFR
2010-10-01
... safety relief valves, liquid level gaging devices and pressure gages shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of noncorrosive material may be attached to...
Code of Federal Regulations, 2013 CFR
2013-10-01
... safety relief valves, liquid level gaging devices and pressure gages shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of noncorrosive material may be attached to...
Code of Federal Regulations, 2014 CFR
2014-10-01
... safety relief valves, liquid level gaging devices and pressure gages shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of noncorrosive material may be attached to...
Code of Federal Regulations, 2012 CFR
2012-10-01
... safety relief valves, liquid level gaging devices and pressure gages shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of noncorrosive material may be attached to...
Code of Federal Regulations, 2011 CFR
2011-10-01
... safety relief valves, liquid level gaging devices and pressure gages shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of noncorrosive material may be attached to...
Gillet, Philippe; Maltha, Jessica; Hermans, Veerle; Ravinetto, Raffaella; Bruggeman, Cathrien; Jacobs, Jan
2011-02-13
The present study assessed malaria RDT kits for adequate and correct packaging, design and labelling of boxes and components. Information inserts were studied for readability and accuracy of information. Criteria for packaging, design, labelling and information were compiled from Directive 98/79 of the European Community (EC), relevant World Health Organization (WHO) documents and studies on end-users' performance of RDTs. Typography and readability level (Flesch-Kincaid grade level) were assessed. Forty-two RDT kits from 22 manufacturers were assessed, 35 of which had evidence of good manufacturing practice according to available information (i.e. CE-label affixed or inclusion in the WHO list of ISO13485:2003 certified manufacturers). Shortcomings in devices were (i) insufficient place for writing sample identification (n=40) and (ii) ambiguous labelling of the reading window (n=6). Buffer vial labels were lacking essential information (n=24) or were of poor quality (n=16). Information inserts had elevated readability levels (median Flesch Kincaid grade 8.9, range 7.1-12.9) and user-unfriendly typography (median font size 8, range 5-10). Inadequacies included (i) no referral to biosafety (n=18), (ii) critical differences between depicted and real devices (n=8), (iii) figures with unrealistic colours (n=4), (iv) incomplete information about RDT line interpretations (n=31) and no data on test characteristics (n=8). Other problems included (i) kit names that referred to Plasmodium vivax although targeting a pan-species Plasmodium antigen (n=4), (ii) not stating the identity of the pan-species antigen (n=2) and (iii) slight but numerous differences in names displayed on boxes, device packages and information inserts. Three CE labelled RDT kits produced outside the EC had no authorized representative affixed and the shape and relative dimensions of the CE symbol affixed did not comply with the Directive 98/79/EC. Overall, RDTs with evidence of GMP scored better compared to those without but inadequacies were observed in both groups. Overall, malaria RDTs showed shortcomings in quality of construction, design and labelling of boxes, device packages, devices and buffers. Information inserts were difficult to read and lacked relevant information.
16 CFR 502.100 - “Cents-off” representations.
Code of Federal Regulations, 2011 CFR
2011-01-01
... of the “cents-off” representation imprinted on the commodity package or label. (3) Each “cents-off” representation imprinted on the package or label is limited to a phrase which reflects that the price marked by..., designated as the “regular price”, clearly and conspicuously on the package or label of the commodity or on a...
Long-Term Effects of Labeling a Rape Experience
ERIC Educational Resources Information Center
McMullin, Darcy; White, Jacquelyn W.
2006-01-01
Research has found that approximately half of women who report an experience that meets the legal definition of rape do not label it rape. It has been assumed that labeling the experience as rape is necessary and beneficial for recovery; however, conflicting findings have been reported. In the present study, a longitudinal design was utilized to…
Food and Drug Labeling and the Adult Reader.
ERIC Educational Resources Information Center
McKenna, Michael C.; Aker, Richard
1978-01-01
Full disclosure of ingredients on food, drugs, and cosmetic labels is really non-disclosure where the chemical formulation has no common name or where one generic name covers a variety of formations. The Food and Drug Administration offers suggestions for adult education programs in consumer awareness, understanding compound nomenclature, and…
33 CFR 274.7 - Authorization of pesticide use.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Authorization of pesticide use... of pesticide use. (a) Programs approved in § 274.6(b) must be those as described on the pesticide label. Pesticide uses which are different from the registered use, require amendment of the label...
33 CFR 274.7 - Authorization of pesticide use.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Authorization of pesticide use... of pesticide use. (a) Programs approved in § 274.6(b) must be those as described on the pesticide label. Pesticide uses which are different from the registered use, require amendment of the label...
33 CFR 274.7 - Authorization of pesticide use.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Authorization of pesticide use... of pesticide use. (a) Programs approved in § 274.6(b) must be those as described on the pesticide label. Pesticide uses which are different from the registered use, require amendment of the label...
33 CFR 274.7 - Authorization of pesticide use.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Authorization of pesticide use... of pesticide use. (a) Programs approved in § 274.6(b) must be those as described on the pesticide label. Pesticide uses which are different from the registered use, require amendment of the label...
Kansas State University Libraries' OCR Labeling Project.
ERIC Educational Resources Information Center
Thierer, Joyce; Bower, Merry
This publication describes the planning and implementation of an optical character recognition (OCR) labeling project, the first stage of Kansas State University (KSU) Libraries' program of conversion from a manual to an automated circulation system. It is noted that a telephone survey of libraries with automated circulation systems and…
Child Nutrition Labeling for Meat and Poultry Products.
ERIC Educational Resources Information Center
Wade, Cheryl; And Others
Prepared for food manufacturers, this publication contains instructions for calculating the contribution that a meat or poultry product makes toward the meal pattern requirements of child nutrition programs. It also contains instructions on how to apply for and obtain the approval for a label containing a child nutrition statement. These…
ERIC Educational Resources Information Center
Lichtenstein, Stephen; Michaelides, Nike
1993-01-01
These 4 case studies examine the last years of high school and postschool experiences of 4 21-year-olds labeled mentally retarded. Issues discussed include school compliance with legislation concerning Individualized Education Programs, influence of parental involvement, adult services, and necessary employment supports. (JDD)
15 CFR 16.5 - Development of performance information labeling specifications.
Code of Federal Regulations, 2010 CFR
2010-01-01
... parties and set out in full in the Specification; (3) A prototype label and directions for displaying the..., a notice either: (1) Giving the complete text of a final Specification, including conditions of use, and stating that any prospective participant in the program desiring voluntarily to use the Department...
The Validation of a Food Label Literacy Questionnaire for Elementary School Children
ERIC Educational Resources Information Center
Reynolds, Jesse S.; Treu, Judith A.; Njike, Valentine; Walker, Jennifer; Smith, Erica; Katz, Catherine S.; Katz, David L.
2012-01-01
Objective: To determine the reliability and validity of a 10-item questionnaire, the Food Label Literacy for Applied Nutrition Knowledge questionnaire. Methods: Participants were elementary school children exposed to a 90-minute school-based nutrition program. Reliability was assessed via Cronbach alpha and intraclass correlation coefficient…
An Interactive User Interface for Drug Labeling to Improve Readability and Decision-Making
Abedtash, Hamed; Duke, Jon D.
2015-01-01
FDA-approved prescribing information (also known as product labeling or labels) contain critical safety information for health care professionals. Drug labels have often been criticized, however, for being overly complex, difficult to read, and rife with overwarning, leading to high cognitive load. In this project, we aimed to improve the usability of drug labels by increasing the ‘signal-to-noise ratio’ and providing meaningful information to care providers based on patient-specific comorbidities and concomitant medications. In the current paper, we describe the design process and resulting web application, known as myDrugLabel. Using the Structured Product Label documents as a base, we describe the process of label personalization, readability improvements, and integration of diverse evidence sources, including the medical literature from PubMed, pharmacovigilance reports from FDA adverse event reporting system (FAERS), and social media signals directly into the label. PMID:26958158
An Interactive User Interface for Drug Labeling to Improve Readability and Decision-Making.
Abedtash, Hamed; Duke, Jon D
FDA-approved prescribing information (also known as product labeling or labels) contain critical safety information for health care professionals. Drug labels have often been criticized, however, for being overly complex, difficult to read, and rife with overwarning, leading to high cognitive load. In this project, we aimed to improve the usability of drug labels by increasing the 'signal-to-noise ratio' and providing meaningful information to care providers based on patient-specific comorbidities and concomitant medications. In the current paper, we describe the design process and resulting web application, known as myDrugLabel. Using the Structured Product Label documents as a base, we describe the process of label personalization, readability improvements, and integration of diverse evidence sources, including the medical literature from PubMed, pharmacovigilance reports from FDA adverse event reporting system (FAERS), and social media signals directly into the label.
Yu, Dan; Dong, Zhiqiang; Gustafson, William Clay; Ruiz-González, Rubén; Signor, Luca; Marzocca, Fanny; Borel, Franck; Klassen, Matthew P; Makhijani, Kalpana; Royant, Antoine; Jan, Yuh-Nung; Weiss, William A; Guo, Su; Shu, Xiaokun
2016-02-01
Fluorescent proteins (FPs) are powerful tools for cell and molecular biology. Here based on structural analysis, a blue-shifted mutant of a recently engineered monomeric infrared fluorescent protein (mIFP) has been rationally designed. This variant, named iBlueberry, bears a single mutation that shifts both excitation and emission spectra by approximately 40 nm. Furthermore, iBlueberry is four times more photostable than mIFP, rendering it more advantageous for imaging protein dynamics. By tagging iBlueberry to centrin, it has been demonstrated that the fusion protein labels the centrosome in the developing zebrafish embryo. Together with GFP-labeled nucleus and tdTomato-labeled plasma membrane, time-lapse imaging to visualize the dynamics of centrosomes in radial glia neural progenitors in the intact zebrafish brain has been demonstrated. It is further shown that iBlueberry can be used together with mIFP in two-color protein labeling in living cells and in two-color tumor labeling in mice. © 2015 The Protein Society.
Mead, Erin L; Cohen, Joanna E; Kennedy, Caitlin E; Gallo, Joseph; Latkin, Carl A
2015-02-07
Use of communication theories in the development of pictorial health warning labels (graphic warning labels) for cigarette packaging might enhance labels' impact on motivation to quit, but research has been limited, particularly among low socioeconomic status (SES) populations in the U.S. This qualitative study explored perceptions of theory-based graphic warning labels and their role in motivation to quit among low-income smokers. A cross-sectional qualitative study was conducted with 25 low-income adult smokers in Baltimore, Maryland, who were purposively sampled from a community-based source population. Semi-structured, in-depth interviews were conducted from January to February 2014. Participants were asked about the motivational impact of 12 labels falling into four content categories: negative depictions of the health effects of smoking to smokers and others, and positive depictions of the benefits of quitting to smokers and others. Data were coded using a combined inductive/deductive approach and analyzed thematically through framework analysis. Labels depicting negative health effects to smokers were identified as most motivational, followed by labels depicting negative health effects to others. Reasons included perceived severity of and susceptibility to the effects, negative emotional reactions (such as fear), and concern for children. Labels about the benefits of quitting were described as motivational because of their hopefulness, characters as role models, and desire to improve family health. Reasons why labels were described as not motivational included lack of impact on perceived severity/susceptibility, low credibility, and fatalistic attitudes regarding the inevitability of disease. Labels designed to increase risk perceptions from smoking might be significant sources of motivation for low SES smokers. Findings suggest innovative theory-driven approaches for the design of labels, such as using former smokers as role models, contrasting healthy and unhealthy characters, and socially-oriented labels, might motivate low SES smokers to quit.
2013-01-01
Background This study used focus groups to pilot and evaluate a new nutrition label format and refine the label design. Physical activity equivalent labels present calorie information in terms of the amount of physical activity that would be required to expend the calories in a specified food item. Methods Three focus groups with a total of twenty participants discussed food choices and nutrition labeling. They provided information on comprehension, usability and acceptability of the label. A systematic coding process was used to apply descriptive codes to the data and to identify emerging themes and attitudes. Results Participants in all three groups were able to comprehend the label format. Discussion about label format focused on issues including gender of the depicted figure, physical fitness of the figure, preference for walking or running labels, and preference for information in miles or minutes. Feedback from earlier focus groups was used to refine the labels in an iterative process. Conclusions In contrast to calorie labels, participants shown physical activity labels asked and answered, “How does this label apply to me?” This shift toward personalized understanding may indicate that physical activity labels offer an advantage over currently available nutrition labels. PMID:23742678
Mashburn, Andrew J; Downer, Jason T; Rivers, Susan E; Brackett, Marc A; Martinez, Andres
2014-04-01
Social and emotional learning programs are designed to improve the quality of social interactions in schools and classrooms in order to positively affect students' social, emotional, and academic development. The statistical power of group randomized trials to detect effects of social and emotional learning programs and other preventive interventions on setting-level outcomes is influenced by the reliability of the outcome measure. In this paper, we apply generalizability theory to an observational measure of the quality of classroom interactions that is an outcome in a study of the efficacy of a social and emotional learning program called The Recognizing, Understanding, Labeling, Expressing, and Regulating emotions Approach. We estimate multiple sources of error variance in the setting-level outcome and identify observation procedures to use in the efficacy study that most efficiently reduce these sources of error. We then discuss the implications of using different observation procedures on both the statistical power and the monetary costs of conducting the efficacy study.
Muñoz, P; García-Olcina, R; Habib, C; Chen, L R; Leijtens, X J M; de Vries, T; Robbins, D; Capmany, J
2011-07-04
In this paper the design, fabrication and experimental characterization of an spectral amplitude coded (SAC) optical label swapper monolithically integrated on Indium Phosphide (InP) is presented. The device has a footprint of 4.8x1.5 mm2 and is able to perform label swapping operations required in SAC at a speed of 155 Mbps. The device was manufactured in InP using a multiple purpose generic integration scheme. Compared to previous SAC label swapper demonstrations, using discrete component assembly, this label swapper chip operates two order of magnitudes faster.
NASA Technical Reports Server (NTRS)
1988-01-01
American Bar Codes, Inc. developed special bar code labels for inventory control of space shuttle parts and other space system components. ABC labels are made in a company-developed anodizing aluminum process and consecutively marketed with bar code symbology and human readable numbers. They offer extreme abrasion resistance and indefinite resistance to ultraviolet radiation, capable of withstanding 700 degree temperatures without deterioration and up to 1400 degrees with special designs. They offer high resistance to salt spray, cleaning fluids and mild acids. ABC is now producing these bar code labels commercially or industrial customers who also need labels to resist harsh environments.
Comparing errors in ED computer-assisted vs conventional pediatric drug dosing and administration.
Yamamoto, Loren; Kanemori, Joan
2010-06-01
Compared to fixed-dose single-vial drug administration in adults, pediatric drug dosing and administration requires a series of calculations, all of which are potentially error prone. The purpose of this study is to compare error rates and task completion times for common pediatric medication scenarios using computer program assistance vs conventional methods. Two versions of a 4-part paper-based test were developed. Each part consisted of a set of medication administration and/or dosing tasks. Emergency department and pediatric intensive care unit nurse volunteers completed these tasks using both methods (sequence assigned to start with a conventional or a computer-assisted approach). Completion times, errors, and the reason for the error were recorded. Thirty-eight nurses completed the study. Summing the completion of all 4 parts, the mean conventional total time was 1243 seconds vs the mean computer program total time of 879 seconds (P < .001). The conventional manual method had a mean of 1.8 errors vs the computer program with a mean of 0.7 errors (P < .001). Of the 97 total errors, 36 were due to misreading the drug concentration on the label, 34 were due to calculation errors, and 8 were due to misplaced decimals. Of the 36 label interpretation errors, 18 (50%) occurred with digoxin or insulin. Computerized assistance reduced errors and the time required for drug administration calculations. A pattern of errors emerged, noting that reading/interpreting certain drug labels were more error prone. Optimizing the layout of drug labels could reduce the error rate for error-prone labels. Copyright (c) 2010 Elsevier Inc. All rights reserved.
46 CFR 38.05-5 - Markings-TB/ALL.
Code of Federal Regulations, 2014 CFR
2014-10-01
..., except safety relief valves, liquid level gaging devices, and pressure gages, shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of corrosion-resistant material may be...
46 CFR 38.05-5 - Markings-TB/ALL.
Code of Federal Regulations, 2010 CFR
2010-10-01
..., except safety relief valves, liquid level gaging devices, and pressure gages, shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of corrosion-resistant material may be...
46 CFR 38.05-5 - Markings-TB/ALL.
Code of Federal Regulations, 2013 CFR
2013-10-01
..., except safety relief valves, liquid level gaging devices, and pressure gages, shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of corrosion-resistant material may be...
46 CFR 38.05-5 - Markings-TB/ALL.
Code of Federal Regulations, 2012 CFR
2012-10-01
..., except safety relief valves, liquid level gaging devices, and pressure gages, shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of corrosion-resistant material may be...
46 CFR 38.05-5 - Markings-TB/ALL.
Code of Federal Regulations, 2011 CFR
2011-10-01
..., except safety relief valves, liquid level gaging devices, and pressure gages, shall be labeled to designate whether they terminate in the vapor or liquid space. Labels of corrosion-resistant material may be...
Charlop, M H
1983-01-01
This investigation, consisting of two experiments, was designed to assess the effects of autistic immediate echolalia on acquisition and generalization of receptive labeling tasks. Experiment 1 addressed whether autistic children could use their echolalia to facilitate acquisition. The results indicated that incorporating echolalia (echo of the requested object's label) into the task before manual response (handing the requested object to the experimenter) facilitated receptive labeling. Experiment 2 was designed to determine the effects of incorporating echolalia into task response on acquisition and subsequent generalization. These results indicated that echolalia facilitated generalization for echolalic autistic children but not for functionally mute autistic children. The results of the experiments are discussed in terms of stimulus control. Additionally, it is proposed that perhaps in certain cases, echolalia should not be eliminated, but used to advantage in receptive responding. PMID:6833164
Charlop, M H
1983-01-01
This investigation, consisting of two experiments, was designed to assess the effects of autistic immediate echolalia on acquisition and generalization of receptive labeling tasks. Experiment 1 addressed whether autistic children could use their echolalia to facilitate acquisition. The results indicated that incorporating echolalia (echo of the requested object's label) into the task before manual response (handing the requested object to the experimenter) facilitated receptive labeling. Experiment 2 was designed to determine the effects of incorporating echolalia into task response on acquisition and subsequent generalization. These results indicated that echolalia facilitated generalization for echolalic autistic children but not for functionally mute autistic children. The results of the experiments are discussed in terms of stimulus control. Additionally, it is proposed that perhaps in certain cases, echolalia should not be eliminated, but used to advantage in receptive responding.
2011-01-01
Background Labeling whole Arabidopsis (Arabidopsis thaliana) plants to high enrichment with 13C for proteomics and metabolomics applications would facilitate experimental approaches not possible by conventional methods. Such a system would use the plant's native capacity for carbon fixation to ubiquitously incorporate 13C from 13CO2 gas. Because of the high cost of 13CO2 it is critical that the design conserve the labeled gas. Results A fully enclosed automated plant growth enclosure has been designed and assembled where the system simultaneously monitors humidity, temperature, pressure and 13CO2 concentration with continuous adjustment of humidity, pressure and 13CO2 levels controlled by a computer running LabView software. The enclosure is mounted on a movable cart for mobility among growth environments. Arabidopsis was grown in the enclosure for up to 8 weeks and obtained on average >95 atom% enrichment for small metabolites, such as amino acids and >91 atom% for large metabolites, including proteins and peptides. Conclusion The capability of this labeling system for isotope dilution experiments was demonstrated by evaluation of amino acid turnover using GC-MS as well as protein turnover using LC-MS/MS. Because this 'open source' Arabidopsis 13C-labeling growth environment was built using readily available materials and software, it can be adapted easily to accommodate many different experimental designs. PMID:21310072
Stress corrosion in titanium alloys and other metallic materials
NASA Technical Reports Server (NTRS)
Harkins, C. G. (Editor); Brotzen, F. R.; Hightower, J. W.; Mclellan, R. B.; Roberts, J. M.; Rudee, M. L.; Leith, I. R.; Basu, P. K.; Salama, K.; Parris, D. P.
1971-01-01
Multiple physical and chemical techniques including mass spectroscopy, atomic absorption spectroscopy, gas chromatography, electron microscopy, optical microscopy, electronic spectroscopy for chemical analysis (ESCA), infrared spectroscopy, nuclear magnetic resonance (NMR), X-ray analysis, conductivity, and isotopic labeling were used in investigating the atomic interactions between organic environments and titanium and titanium oxide surfaces. Key anhydrous environments studied included alcohols, which contain hydrogen; carbon tetrachloride, which does not contain hydrogen; and mixtures of alcohols and halocarbons. Effects of dissolved salts in alcohols were also studied. This program emphasized experiments designed to delineate the conditions necessary rather than sufficient for initiation processes and for propagation processes in Ti SCC.
Program Manipulates Plots For Effective Display
NASA Technical Reports Server (NTRS)
Bauer, F.; Downing, J.
1990-01-01
Windowed Observation of Relative Motion (WORM) computer program primarily intended for generation of simple X-Y plots from data created by other programs. Enables user to label, zoom, and change scales of various plots. Three-dimensional contour and line plots provided. Written in PASCAL.
Optimized molecular design of ADAPT-based HER2-imaging probes labelled with 111In and 68Ga.
Lindbo, Sarah; Garousi, Javad; Mitran, Bogdan; Vorobyeva, Anzhelika; Oroujeni, Maryam; Orlova, Anna; Hober, Sophia; Tolmachev, Vladimir
2018-06-04
Radionuclide molecular imaging is a promising tool for visualization of cancer associated molecular abnormalities in vivo and stratification of patients for specific therapies. ADAPT is a new type of small engineered proteins based on the scaffold of an albumin binding domain of protein G. ADAPTs have been utilized to select and develop high affinity binders to different proteinaceous targets. ADAPT6 binds to human epidermal growth factor 2 (HER2) with low nanomolar affinity and can be used for its in vivo visualization. Molecular design of 111 In-labeled anti-HER2 ADAPT has been optimized in several earlier studies. In this study, we made a direct comparison of two of the most promising variants, having either a DEAVDANS or a (HE) 3 DANS sequence at the N-terminus, conjugated with a maleimido derivative of DOTA to a GSSC amino acids sequence at the C-terminus. The variants (designated DOTA-C 59 - DEAVDANS-ADAPT6-GSSC and DOTA-C 61 -(HE) 3 DANS-ADAPT6-GSSC) were stably labeled with 111 In for SPECT and 68 Ga for PET. Biodistribution of labeled ADAPT variants was evaluated in nude mice bearing human tumor xenografts with different levels of HER2 expression. Both variants enabled clear discrimination between tumors with high and low levels of HER2 expression. 111 In-labeled ADAPT6 derivatives provided higher tumor-to-organ ratios compared to 68 Ga-labeled counterparts. The best performing variant was DOTA-C 61 -(HE) 3 DANS-ADAPT6-GSSC, providing tumor-to-blood ratios of 208±36 and 109±17 at 3 h for 111 In and 68 Ga labels, respectively.
ERIC Educational Resources Information Center
Jasti, Sunitha; Kovacs, Szilvia
2010-01-01
Objectives: To examine the correlates of trans fat knowledge and trans fat label use; to examine the influence of trans fat knowledge, trans fat label use, and dietary attitudes on intake of high trans fat food. Design: Cross-sectional survey. Setting: An urban commuter college. Subjects: Two hundred twenty-two college students. Variables…
[Visualization and Functional Regulation of Live Cell Proteins Based on Labeling Probe Design].
Mizukami, Shin; Kikuchi, Kazuya
2016-01-01
There are several approaches to understanding the physiological roles of biomolecules: (1) by observing the localization or activities of biomolecules (based on microscopic imaging experiments with fluorescent proteins or fluorescent probes) and (2) by investigating the cellular response via activation or suppression of functions of the target molecule (by using inhibitors, antagonists, siRNAs, etc.). In this context, protein-labeling technology serves as a powerful tool that can be used in various experiments, such as for fluorescence imaging of target proteins. Recently, we developed a protein-labeling technology that uses a mutant β-lactamase (a bacterial hydrolase) as the tag protein. In this protein-labeling technology, also referred to as the BL-tag technology, various β-lactam compounds were used as specific ligands that were covalently labeled to the tag. One major advantage of this labeling technology is that various functions can be carried out by suitably designing both the functional moieties such as the fluorophore and the β-lactam ligand structure. In this review, we briefly introduce the BL-tag technology and describe our future outlook for this technology, such as in fluorescence imaging of biomolecules and functional regulation of cellular proteins in living cells.
Comparison of Building Energy Modeling Programs: Building Loads
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhu, Dandan; Hong, Tianzhen; Yan, Da
This technical report presented the methodologies, processes, and results of comparing three Building Energy Modeling Programs (BEMPs) for load calculations: EnergyPlus, DeST and DOE-2.1E. This joint effort, between Lawrence Berkeley National Laboratory, USA and Tsinghua University, China, was part of research projects under the US-China Clean Energy Research Center on Building Energy Efficiency (CERC-BEE). Energy Foundation, an industrial partner of CERC-BEE, was the co-sponsor of this study work. It is widely known that large discrepancies in simulation results can exist between different BEMPs. The result is a lack of confidence in building simulation amongst many users and stakeholders. In themore » fields of building energy code development and energy labeling programs where building simulation plays a key role, there are also confusing and misleading claims that some BEMPs are better than others. In order to address these problems, it is essential to identify and understand differences between widely-used BEMPs, and the impact of these differences on load simulation results, by detailed comparisons of these BEMPs from source code to results. The primary goal of this work was to research methods and processes that would allow a thorough scientific comparison of the BEMPs. The secondary goal was to provide a list of strengths and weaknesses for each BEMP, based on in-depth understandings of their modeling capabilities, mathematical algorithms, advantages and limitations. This is to guide the use of BEMPs in the design and retrofit of buildings, especially to support China’s building energy standard development and energy labeling program. The research findings could also serve as a good reference to improve the modeling capabilities and applications of the three BEMPs. The methodologies, processes, and analyses employed in the comparison work could also be used to compare other programs. The load calculation method of each program was analyzed and compared to identify the differences in solution algorithms, modeling assumptions and simplifications. Identifying inputs of each program and their default values or algorithms for load simulation was a critical step. These tend to be overlooked by users, but can lead to large discrepancies in simulation results. As weather data was an important input, weather file formats and weather variables used by each program were summarized. Some common mistakes in the weather data conversion process were discussed. ASHRAE Standard 140-2007 tests were carried out to test the fundamental modeling capabilities of the load calculations of the three BEMPs, where inputs for each test case were strictly defined and specified. The tests indicated that the cooling and heating load results of the three BEMPs fell mostly within the range of spread of results from other programs. Based on ASHRAE 140-2007 test results, the finer differences between DeST and EnergyPlus were further analyzed by designing and conducting additional tests. Potential key influencing factors (such as internal gains, air infiltration, convection coefficients of windows and opaque surfaces) were added one at a time to a simple base case with an analytical solution, to compare their relative impacts on load calculation results. Finally, special tests were designed and conducted aiming to ascertain the potential limitations of each program to perform accurate load calculations. The heat balance module was tested for both single and double zone cases. Furthermore, cooling and heating load calculations were compared between the three programs by varying the heat transfer between adjacent zones, the occupancy of the building, and the air-conditioning schedule.« less
Integrated research training program of excellence in radiochemistry
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lapi, Suzanne
2015-09-18
The overall goal of this “Integrated Research Training Program of Excellence in Radiochemistry” is to provide a rich and deep research experience in state-of-the-art radiochemistry and in the fundamentals of radioisotopic labeling and tracer methodology to develop researchers who are capable of meeting the challenges of designing and preparing radiotracers of broad applicability for monitoring and imaging diverse biological systems and environmental processes. This program was based in the Departments of Radiology and Radiation Oncology at Washington University Medical School and the Department of Chemistry at the University of Illinois at Urbana Champaign, and it was initially directed by Professormore » Michael J. Welch as Principal Investigator. After his passing in 2012, the program was led by Professor Suzanne E. Lapi. Programmatic content and participant progress was overseen by an Internal Advisory Committee of senior investigators consisting of the PIs, Professor Mach from the Department of Radiology at Washington University and Professor John A. Katzenellenbogen of the Department of Chemistry at the University of Illinois. A small External Advisory Committee to give overall program guidance was also constituted of experts in radiolabeled compounds and in their applications in environmental and plant science.« less
Cabrera, Manuel; Machín, Leandro; Arrúa, Alejandra; Antúnez, Lucía; Curutchet, María Rosa; Giménez, Ana; Ares, Gastón
2017-12-01
Warnings are a new directive front-of-pack (FOP) nutrition labelling scheme that highlights products with high content of key nutrients. The design of warnings influences their ability to catch consumers' attention and to clearly communicate their intended meaning, which are key determinants of their effectiveness. The aim of the present work was to evaluate the influence of design features of warnings as a FOP nutrition labelling scheme on perceived healthfulness and attentional capture. Five studies with a total of 496 people were carried out. In the first study, the association of colour and perceived healthfulness was evaluated in an online survey in which participants had to rate their perceived healthfulness of eight colours. In the second study, the influence of colour, shape and textual information on perceived healthfulness was evaluated using choice-conjoint analysis. The third study focused on implicit associations between two design features (shape and colour) on perceived healthfulness. The fourth and fifth studies used visual search to evaluate the influence of colour, size and position of the warnings on attentional capture. Perceived healthfulness was significantly influenced by shape, colour and textual information. Colour was the variable with the largest contribution to perceived healthfulness. Colour, size and position of the warnings on the labels affected attentional capture. Results from the experiments provide recommendations for the design of warnings to identify products with unfavourable nutrient profile.
This Notice requires registrants of certain pesticide products claimed to control commensal rodents and registered under FIFRA to revise the labeling of such products to bear certain statements concerning tamper-resistant bait stations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Maintenance instructions, warranties, emission labeling and fuel economy requirements. 85.1510 Section 85.1510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Importation of Motor Vehicles and...
Coping with the Stigma of Mental Illness: Empirically-Grounded Hypotheses from Computer Simulations
ERIC Educational Resources Information Center
Kroska, Amy; Har, Sarah K.
2011-01-01
This research demonstrates how affect control theory and its computer program, "Interact", can be used to develop empirically-grounded hypotheses regarding the connection between cultural labels and behaviors. Our demonstration focuses on propositions in the modified labeling theory of mental illness. According to the MLT, negative societal…
7 CFR 205.300 - Use of the term, “organic.”
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 3 2013-01-01 2013-01-01 false Use of the term, âorganic.â 205.300 Section 205.300 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market Information § 205.300 Use of the term...
Code of Federal Regulations, 2011 CFR
2011-01-01
... PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market Information § 205.311 USDA Seal. (a) The... (2) On a white or transparent background with black outer circle and black “USDA” on a white or transparent upper half of the circle with a contrasting white or transparent “organic” on the black lower half...
Code of Federal Regulations, 2010 CFR
2010-01-01
... PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market Information § 205.311 USDA Seal. (a) The... (2) On a white or transparent background with black outer circle and black “USDA” on a white or transparent upper half of the circle with a contrasting white or transparent “organic” on the black lower half...
Code of Federal Regulations, 2012 CFR
2012-01-01
... PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market Information § 205.311 USDA Seal. (a) The... (2) On a white or transparent background with black outer circle and black “USDA” on a white or transparent upper half of the circle with a contrasting white or transparent “organic” on the black lower half...
Code of Federal Regulations, 2014 CFR
2014-01-01
... PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market Information § 205.311 USDA Seal. (a) The... (2) On a white or transparent background with black outer circle and black “USDA” on a white or transparent upper half of the circle with a contrasting white or transparent “organic” on the black lower half...
Code of Federal Regulations, 2013 CFR
2013-01-01
... PROVISIONS NATIONAL ORGANIC PROGRAM Labels, Labeling, and Market Information § 205.311 USDA Seal. (a) The... (2) On a white or transparent background with black outer circle and black “USDA” on a white or transparent upper half of the circle with a contrasting white or transparent “organic” on the black lower half...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-10
... Received on Labeling and Grass-Fed Products Many commenters suggested that there is a place for both grass... labeling system: ``Organic--Grass Fed/Grain Finished,'' ``Organic--Grass Fed/Finished on Pasture with Supplemental Grain Feeding,'' ``Organic--100% Grass Fed/Grass Finished.'' Their recommendation suggested that...
IsoDesign: a software for optimizing the design of 13C-metabolic flux analysis experiments.
Millard, Pierre; Sokol, Serguei; Letisse, Fabien; Portais, Jean-Charles
2014-01-01
The growing demand for (13) C-metabolic flux analysis ((13) C-MFA) in the field of metabolic engineering and systems biology is driving the need to rationalize expensive and time-consuming (13) C-labeling experiments. Experimental design is a key step in improving both the number of fluxes that can be calculated from a set of isotopic data and the precision of flux values. We present IsoDesign, a software that enables these parameters to be maximized by optimizing the isotopic composition of the label input. It can be applied to (13) C-MFA investigations using a broad panel of analytical tools (MS, MS/MS, (1) H NMR, (13) C NMR, etc.) individually or in combination. It includes a visualization module to intuitively select the optimal label input depending on the biological question to be addressed. Applications of IsoDesign are described, with an example of the entire (13) C-MFA workflow from the experimental design to the flux map including important practical considerations. IsoDesign makes the experimental design of (13) C-MFA experiments more accessible to a wider biological community. IsoDesign is distributed under an open source license at http://metasys.insa-toulouse.fr/software/isodes/ © 2013 Wiley Periodicals, Inc.
Tangprasertchai, Narin S; Zhang, Xiaojun; Ding, Yuan; Tham, Kenneth; Rohs, Remo; Haworth, Ian S; Qin, Peter Z
2015-01-01
The technique of site-directed spin labeling (SDSL) provides unique information on biomolecules by monitoring the behavior of a stable radical tag (i.e., spin label) using electron paramagnetic resonance (EPR) spectroscopy. In this chapter, we describe an approach in which SDSL is integrated with computational modeling to map conformations of nucleic acids. This approach builds upon a SDSL tool kit previously developed and validated, which includes three components: (i) a nucleotide-independent nitroxide probe, designated as R5, which can be efficiently attached at defined sites within arbitrary nucleic acid sequences; (ii) inter-R5 distances in the nanometer range, measured via pulsed EPR; and (iii) an efficient program, called NASNOX, that computes inter-R5 distances on given nucleic acid structures. Following a general framework of data mining, our approach uses multiple sets of measured inter-R5 distances to retrieve "correct" all-atom models from a large ensemble of models. The pool of models can be generated independently without relying on the inter-R5 distances, thus allowing a large degree of flexibility in integrating the SDSL-measured distances with a modeling approach best suited for the specific system under investigation. As such, the integrative experimental/computational approach described here represents a hybrid method for determining all-atom models based on experimentally-derived distance measurements. © 2015 Elsevier Inc. All rights reserved.
Tangprasertchai, Narin S.; Zhang, Xiaojun; Ding, Yuan; Tham, Kenneth; Rohs, Remo; Haworth, Ian S.; Qin, Peter Z.
2015-01-01
The technique of site-directed spin labeling (SDSL) provides unique information on biomolecules by monitoring the behavior of a stable radical tag (i.e., spin label) using electron paramagnetic resonance (EPR) spectroscopy. In this chapter, we describe an approach in which SDSL is integrated with computational modeling to map conformations of nucleic acids. This approach builds upon a SDSL tool kit previously developed and validated, which includes three components: (i) a nucleotide-independent nitroxide probe, designated as R5, which can be efficiently attached at defined sites within arbitrary nucleic acid sequences; (ii) inter-R5 distances in the nanometer range, measured via pulsed EPR; and (iii) an efficient program, called NASNOX, that computes inter-R5 distances on given nucleic acid structures. Following a general framework of data mining, our approach uses multiple sets of measured inter-R5 distances to retrieve “correct” all-atom models from a large ensemble of models. The pool of models can be generated independently without relying on the inter-R5 distances, thus allowing a large degree of flexibility in integrating the SDSL-measured distances with a modeling approach best suited for the specific system under investigation. As such, the integrative experimental/computational approach described here represents a hybrid method for determining all-atom models based on experimentally-derived distance measurements. PMID:26477260
The Multiple Abilities Paradigm: Integrated General and Special Education Teacher Preparation.
ERIC Educational Resources Information Center
Ellis, Edwin S.; And Others
1995-01-01
The Multiple Abilities Program (MAP) at the University of Alabama is a five-semester, competency-based preservice program preparing teachers to teach all students regardless of settings or disability labels. This article outlines the program rationale, organizational framework, and the program feature in which undergraduates spend over 50 percent…
Examination of the evidence for off-label use of gabapentin.
Mack, Alicia
2003-01-01
(1) Describe the relevance of off-label use of gabapentin to managed care pharmacy; (2) summarize recent FDA warnings and media reports related to off-label gabapentin use; (3) review medical information pertaining to the off-label use of gabapentin; (4) outline alternatives to off-label use of gabapentin in an evidence-based fashion, where literature exists to support such alternatives; and (5) encourage key clinicians and decision makers in managed care pharmacy to develop and support programs that restrict the use of gabapentin to specific evidence-based situations. Gabapentin is approved by the U.S. Food and Drug Administration (FDA) for adjunctive therapy in treatment of partial seizures and postherpetic neuralgia. Various off-label (unapproved) uses have been reported, and the use of gabapentin for off-label purposes has reportedly exceeded use for FDAapproved indications. Pharmaceutical marketing practices and physician dissatisfaction with currently available pharmacological treatment options may be key factors that contribute to this prescribing trend. Recently, the media has focused on these issues, noting that many cases of reported safety and effectiveness of gabapentin for off-label use may have been fabricated. A thorough review of the medical and pharmacy literature related to off-label use of gabapentin was performed, and a summary of the literature for the following conditions is presented: bipolar disorder, peripheral neuropathy, diabetic neuropathy, complex regional pain syndrome, attention deficit disorder, restless legs syndrome, trigeminal neuralgia, periodic limb movement disorder of sleep, migraine headaches, and alcohol withdrawal syndrome. A common theme in the medical literature for gabapentin is the prevalence of open-label studies and a lack of randomized controlled clinical trials for all but a small number of indications. In the majority of circumstances where it has reported potential for.off-label. use, gabapentin is not the optimal treatment. The off-label use of gabapentin for indications not approved by the FDA should be reserved for cases where there is solid research support (e.g., diabetic neuropathy and prophylaxis of frequent migraine headaches). Managed care pharmacists should develop programs to restrict the use of gabapentin to these specific evidence-based situations, and key decision makers in managed care practice should feel confident in supporting these use restrictions for gabapentin.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shah, N. K.; Park, W. Y.; Gerke, B.
Improving the energy efficiency of room air conditioners (RACs) while transitioning to low global-warming-potential (GWP) refrigerants will be a critical step toward reducing the energy, peak load, and emissions impacts of RACs while keeping costs low. Previous research quantified the benefits of leapfrogging to high efficiency in tandem with the transition to low-GWP refrigerants for RACs (Shah et al., 2015) and identified opportunities for initial action to coordinate energy efficiency with refrigerant transition in economies constituting about 65% of the global RAC market (Shah et al., 2017). This report describes further research performed to identify the best-performing (i.e., most efficientmore » and low-GWP-refrigerant using) RACs on the market, to support an understanding of the best available technology (BAT). Understanding BAT can help support market-transformation programs for high-efficiency and low-GWP equipment such as minimum energy performance standards (MEPS), labeling, procurement, and incentive programs. We studied RACs available in six economies—China, Europe, India, Japan, South Korea, and the United States—that together account for about 70% of global RAC demand, as well as other emerging economies. The following are our key findings: • Highly efficient RACs using low-GWP refrigerants, e.g., HFC-32 (R-32) and HC-290 (R-290), are commercially available today at prices comparable to similar RACs using high-GWP HCFC-22 (R-22) or HFC-410A (R-410A). • High efficiency is typically a feature of high-end products. However, highly efficient, cost-competitive (less than 1,000 or 1,500 U.S. dollars in retail price, depending on size) RACs are available. • Where R-22 is being phased out, high GWP R-410A still dominates RAC sales in most mature markets except Japan, where R-32 dominates. • In all of the economies studied except Japan, only a few models are energy efficient and use low-GWP refrigerants. For example, in Europe, India, and Indonesia, the highest-efficiency RAC models employ the low-GWP refrigerants R-32 or R-290. • RACs are available in most regions and worldwide that surpass the highest efficiency levels recognized by labeling programs. • Fixed-speed RACs using high-GWP and ozone-depleting R-22 refrigerant still dominate the market in many emerging economies. There is significant scope to improve RAC efficiency and transition to low-GWP refrigerants using commercially available technology and to design market-transformation programs for high-efficiency, low-GWP equipment including standards, labeling, procurement, and incentive programs.« less
Leveraging geotagged Twitter data to examine neighborhood happiness, diet, and physical activity
Nguyen, Quynh C; Kath, Suraj; Meng, Hsien-Wen; Li, Dapeng; Smith, Ken Robert; VanDerslice, James A.; Wen, Ming; Li, Feifei
2016-01-01
Objectives Using publicly available, geotagged Twitter data, we created neighborhood indicators for happiness, food and physical activity for three large counties: Salt Lake, San Francisco and New York. Methods We utilize 2.8 million tweets collected between February-August 2015 in our analysis. Geo-coordinates of where tweets were sent allow us to spatially join them to 2010 census tract locations. We implemented quality control checks and tested associations between Twitter-derived variables and sociodemographic characteristics. Results For a random subset of tweets, manually labeled tweets and algorithm labeled tweets had excellent levels of agreement: 73% for happiness; 83% for food, and 85% for physical activity. Happy tweets, healthy food references, and physical activity references were less frequent in census tracts with greater economic disadvantage and higher proportions of racial/ethnic minorities and youths. Conclusions Social media can be leveraged to provide greater understanding of the well-being and health behaviors of communities—information that has been previously difficult and expensive to obtain consistently across geographies. More open access neighborhood data can enable better design of programs and policies addressing social determinants of health. PMID:28533568
An innovative pre-targeting strategy for tumor cell specific imaging and therapy.
Qin, Si-Yong; Peng, Meng-Yun; Rong, Lei; Jia, Hui-Zhen; Chen, Si; Cheng, Si-Xue; Feng, Jun; Zhang, Xian-Zheng
2015-09-21
A programmed pre-targeting system for tumor cell imaging and targeting therapy was established based on the "biotin-avidin" interaction. In this programmed functional system, transferrin-biotin can be actively captured by tumor cells with the overexpression of transferrin receptors, thus achieving the pre-targeting modality. Depending upon avidin-biotin recognition, the attachment of multivalent FITC-avidin to biotinylated tumor cells not only offered the rapid fluorescence labelling, but also endowed the pre-targeted cells with targeting sites for the specifically designed biotinylated peptide nano-drug. Owing to the successful pre-targeting, tumorous HepG2 and HeLa cells were effectively distinguished from the normal 3T3 cells via fluorescence imaging. In addition, the self-assembled peptide nano-drug resulted in enhanced cell apoptosis in the observed HepG2 cells. The tumor cell specific pre-targeting strategy is applicable for a variety of different imaging and therapeutic agents for tumor treatments.
Design and Performance of GMR Sensors for the Detection of Magnetic Microbeads in Biosensors
2003-03-19
characterize the magnetic properties of the NiFe microbeads and chemically functionalize them for use in assays. 2.3. Sensor signal...have been developed as labels for biosensing. Magnetic labels have several potential advantages over other labels. The magnetic properties of the...temperature. Although Dynal M-280 microbeads are extremely monodispersed in size and have excellent biocompatible surface properties , their magnetic
Readability of product ingredient labels can be improved by simple means: an experimental study.
Yazar, Kerem; Seimyr, Gustaf Ö; Novak, Jiri A; White, Ian R; Lidén, Carola
2014-10-01
Ingredient labels on products used by consumers and workers every day, such as food, cosmetics, and detergents, can be difficult to read and understand. To assess whether typographical design and ordering of ingredients can improve the readability of product ingredient labels. The study subjects (n = 16) had to search for two target ingredients in 30 cosmetic product labels and three alternative formats of each. Outcome measures were completion time (reading speed), recognition rate, eye movements, task load and subjective rating when the reading of ingredient labels was assessed by video recording, an eye tracking device, and questionnaires. The completion time was significantly lower (p < 0.001) when subjects were reading all alternative formats than when they were reading the original. The recognition rate was generally high, and improved slightly with the alternative formats. The eye movement measures confirmed that the alternative formats were easier to read than the original product labels. Mental and physical demand and effort were significantly lower (p < 0.036) and experience rating was higher (p < 0.042) for the alternative formats. There were also differences between the alternative formats. Simple adjustments in the design of product ingredient labels would significantly improve their readability, benefiting the many allergic individuals and others in their daily struggle to avoid harmful or unwanted exposure. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Dardis, Christina M; Kraft, Kathryn M; Gidycz, Christine A
2017-08-01
Approximately 60% of legally defined rape victims do not label their experiences as "rape," most of whom label the experience as "a serious miscommunication." However, little research has examined why women choose this label. Labeling rape as a miscommunication could be problematic if chosen due to stereotypical conceptions that one's experience is not "real" rape. The present study used a mixed-methodological approach to understand why women might refer to rape as a "miscommunication," and how their reasons for labeling might differ from those who label their experiences and those who are nonlabeled (i.e., unequivocally state that they were "not victimized"). Participants included 123 undergraduate women who experienced rape. Participants responded to how they labeled rape and answered questions regarding assault characteristics, disclosure, reporting, and self- and perpetrator blame. Chi-square analyses assessed labeling group differences. Responses to an open-ended question about factors contributing to their labeling decision were content analyzed. Whereas miscommunication-labeled and nonlabeled victims reported similar assault characteristics in the quantitative analyses, qualitative content analyses revealed varying reasons for labeling rape as miscommunication, not victimization, and rape. Over three quarters of miscommunication-labeled victims reported that one or more of the following factors influenced their labeling: victim and perpetrator substance use, sexual activity prior to the rape, and perceptions that one did not express nonconsent strongly enough and that the perpetrator "did not realize" their lack of desire. Whereas miscommunication-labeled and nonlabeled victims reported similar assault characteristics, the extent to which those assault characteristics affected their labeling differed. Those who labeled their experiences as miscommunication gave reasons for their label that centered on factors which reflect inconsistencies between their experiences and "stereotypical rape." Misperceptions of rape can be addressed via prevention programming and clinical work.
A study on the consumer's perception of front-of-pack nutrition labeling
Kim, Woo Kyoung
2009-01-01
The goal of this research is to investigate the present situation for front of pack labeling in Korea and the perception of consumers for the new system of labeling, front of pack labeling, based on the consumer survey. We investigated the number of processed foods with front of pack labeling in one retailer in Youngin-si. And we also surveyed 1,019 participants nationwide whose ages were from 20 to 49; the knowledge of nutrition labeling, the knowledge of 'front of pack labeling', and the opinion about the labeling system. The data were analyzed using SAS statistics program. The results were as follows: 13.4% of processed foods had front of pack labeling, and 16.8% of the consumers always checked the nutrition labeling, while 32.7% of the consumers seldom checked it. In addition, 44.3% of the consumers think that 'front of pack labeling' is necessary, and 58.3% of the consumers think it is important to show the percentage of daily value as a way of 'front of pack labeling'. However, 32% of the consumer think the possibility of 'front of pack labeling' is slim. Meanwhile, 58.3% of the consumers think that it is important to have the color difference according to contents. The number of favorite nutrients in the front of pack was four or five. It seems that the recognition of current nutrition labeling has the influence on the willingness of using the future 'front of pack labeling'. Along with our study, the policy for 'front of pack labeling' has to be updated and improved constantly since 'front of pack labeling' helps consumer understand nutrition facts. PMID:20098583
A paper-based Colorimetric Indicator Label using Natural Dye for Monitoring Shrimp Spoilage
NASA Astrophysics Data System (ADS)
Listyarini, A.; Sholihah, W.; Imawan, C.
2018-05-01
Shrimp is a type of perishable food. This study developed a simple indicator label using colorimetric method for monitoring shrimp freshness. This indicator label was made from natural dye extract of Ruellia simplex flowers which immobilized on cellulose paper by dip coating method. The indicator labels were used for examining freshness of shrimp. In this experiment, shrimp were stored in sealed bottles that have been labeled using the indicator and stored at 13 °C, 25 °C, and 40 °C for a certain range of time. Color changes of the indicator labels were observed using digital photography after shrimp storage for 0 h, 2 h, 17 h and 24 h. The color changes that occur were quantified and analyzed using the ImageJ program. The color of the indicator label when detecting the fresh shrimp was pink and after the shrimp spoilage began, the color of the label changed to purple and then became yellow when the shrimp is badly spoilage. The color change rates of label indicator increases as the shrimp storage temperature increased. These results indicate that this label indicator can be used as an indicator of the freshness of shrimps and it is not toxic and safe for food.
Strauss, Christian; Endimiani, Andrea; Perreten, Vincent
2015-01-01
A rapid and simple DNA labeling system has been developed for disposable microarrays and has been validated for the detection of 117 antibiotic resistance genes abundant in Gram-positive bacteria. The DNA was fragmented and amplified using phi-29 polymerase and random primers with linkers. Labeling and further amplification were then performed by classic PCR amplification using biotinylated primers specific for the linkers. The microarray developed by Perreten et al. (Perreten, V., Vorlet-Fawer, L., Slickers, P., Ehricht, R., Kuhnert, P., Frey, J., 2005. Microarray-based detection of 90 antibiotic resistance genes of gram-positive bacteria. J.Clin.Microbiol. 43, 2291-2302.) was improved by additional oligonucleotides. A total of 244 oligonucleotides (26 to 37 nucleotide length and with similar melting temperatures) were spotted on the microarray, including genes conferring resistance to clinically important antibiotic classes like β-lactams, macrolides, aminoglycosides, glycopeptides and tetracyclines. Each antibiotic resistance gene is represented by at least 2 oligonucleotides designed from consensus sequences of gene families. The specificity of the oligonucleotides and the quality of the amplification and labeling were verified by analysis of a collection of 65 strains belonging to 24 species. Association between genotype and phenotype was verified for 6 antibiotics using 77 Staphylococcus strains belonging to different species and revealed 95% test specificity and a 93% predictive value of a positive test. The DNA labeling and amplification is independent of the species and of the target genes and could be used for different types of microarrays. This system has also the advantage to detect several genes within one bacterium at once, like in Staphylococcus aureus strain BM3318, in which up to 15 genes were detected. This new microarray-based detection system offers a large potential for applications in clinical diagnostic, basic research, food safety and surveillance programs for antimicrobial resistance. Copyright © 2014 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Li, Qiang; Huang, Guoliang; Gan, Wupeng; Chen, Shengyi
2009-08-01
Biomolecular interactions can be detected by many established technologies such as fluorescence imaging, surface plasmon resonance (SPR)[1-4], interferometry and radioactive labeling of the analyte. In this study, we have designed and constructed a label-free, real-time sensing platform and its operating imaging instrument that detects interactions using optical phase differences from the accumulation of biological material on solid substrates. This system allows us to monitor biomolecular interactions in real time and quantify concentration changes during micro-mixing processes by measuring the changes of the optical path length (OPD). This simple interferometric technology monitors the optical phase difference resulting from accumulated biomolecular mass. A label-free protein chip that forms a 4×4 probe array was designed and fabricated using a commercial microarray robot spotter on solid substrates. Two positive control probe lines of BSA (Bovine Serum Albumin) and two experimental human IgG and goat IgG was used. The binding of multiple protein targets was performed and continuously detected by using this label-free and real-time sensing platform.
ERIC Educational Resources Information Center
Science Software Quarterly, 1984
1984-01-01
Provides extensive reviews of computer software, examining documentation, ease of use, performance, error handling, special features, and system requirements. Includes statistics, problem-solving (TK Solver), label printing, database management, experimental psychology, Encyclopedia Britannica biology, and DNA-sequencing programs. A program for…
SIMulation of Medication Error induced by Clinical Trial drug labeling: the SIMME-CT study.
Dollinger, Cecile; Schwiertz, Vérane; Sarfati, Laura; Gourc-Berthod, Chloé; Guédat, Marie-Gabrielle; Alloux, Céline; Vantard, Nicolas; Gauthier, Noémie; He, Sophie; Kiouris, Elena; Caffin, Anne-Gaelle; Bernard, Delphine; Ranchon, Florence; Rioufol, Catherine
2016-06-01
To assess the impact of investigational drug labels on the risk of medication error in drug dispensing. A simulation-based learning program focusing on investigational drug dispensing was conducted. The study was undertaken in an Investigational Drugs Dispensing Unit of a University Hospital of Lyon, France. Sixty-three pharmacy workers (pharmacists, residents, technicians or students) were enrolled. Ten risk factors were selected concerning label information or the risk of confusion with another clinical trial. Each risk factor was scored independently out of 5: the higher the score, the greater the risk of error. From 400 labels analyzed, two groups were selected for the dispensing simulation: 27 labels with high risk (score ≥3) and 27 with low risk (score ≤2). Each question in the learning program was displayed as a simulated clinical trial prescription. Medication error was defined as at least one erroneous answer (i.e. error in drug dispensing). For each question, response times were collected. High-risk investigational drug labels correlated with medication error and slower response time. Error rates were significantly 5.5-fold higher for high-risk series. Error frequency was not significantly affected by occupational category or experience in clinical trials. SIMME-CT is the first simulation-based learning tool to focus on investigational drug labels as a risk factor for medication error. SIMME-CT was also used as a training tool for staff involved in clinical research, to develop medication error risk awareness and to validate competence in continuing medical education. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.
Wojcicki, Janet M; Heyman, Melvin B
2013-07-01
Use of nutritional labels in choosing food is associated with healthier eating habits including lower fat intake. Current public health efforts are focusing on the revamping of nutritional labels to make them easier to read and use for the consumer. The study aims to assess the frequency of use of nutritional labels and awareness of the United States Department of Agriculture (USDA) nutritional programmes by low-income women including those participating in the Special Supplemental Nutrition Program for Women, Infants and Children (WIC) as surveyed in the National Health and Nutrition Examination Survey 2005-2006. Many low-income women do not regularly use the nutrition facts panel information on the food label and less than half had heard of the USDA Dietary Guidelines for Americans (38.9%). In multivariate logistic regression, we found that WIC participation was associated with reduced use of the nutrition facts panel in choosing food products [odds ratio (OR) 0.45, 95% confidence interval (CI) 0.22-0.91], the health claims information (OR 0.54, 95% CI 0.32-0.28) and the information on carbohydrates when deciding to buy a product (OR 0.44, 95% CI 0.20-0.97) in comparison with WIC eligible non-participants. Any intervention to improve use of nutritional labels and knowledge of the USDA's nutritional programmes needs to target low-income women, including WIC participants. Future studies should evaluate possible reasons for the low use of nutrition labels among WIC participants in comparison with eligible non-participants. © 2011 John Wiley & Sons Ltd.
Magnetic field design for selecting and aligning immunomagnetic labeled cells.
Tibbe, Arjan G J; de Grooth, Bart G; Greve, Jan; Dolan, Gerald J; Rao, Chandra; Terstappen, Leon W M M
2002-03-01
Recently we introduced the CellTracks cell analysis system, in which samples are prepared based on a combination of immunomagnetic selection, separation, and alignment of cells along ferromagnetic lines. Here we describe the underlying magnetic principles and considerations made in the magnetic field design to achieve the best possible cell selection and alignment of magnetically labeled cells. Materials and Methods Computer simulations, in combination with experimental data, were used to optimize the design of the magnets and Ni lines to obtain the optimal magnetic configuration. A homogeneous cell distribution on the upper surface of the sample chamber was obtained with a magnet where the pole faces were tilted towards each other. The spatial distribution of magnetically aligned objects in between the Ni lines was dependent on the ratio of the diameter of the aligned object and the line spacing, which was tested with magnetically and fluorescently labeled 6 microm polystyrene beads. The best result was obtained when the line spacing was equal to or smaller than the diameter of the aligned object. The magnetic gradient of the designed permanent magnet extracts magnetically labeled cells from any cell suspension to a desired plane, providing a homogeneous cell distribution. In addition, it magnetizes ferro-magnetic Ni lines in this plane whose additional local gradient adds to the gradient of the permanent magnet. The resultant gradient aligns the magnetically labeled cells first brought to this plane. This combination makes it possible, in a single step, to extract and align cells on a surface from any cell suspension. Copyright 2002 Wiley-Liss, Inc.
NASA Astrophysics Data System (ADS)
Finn, R.; Plascjak, P.; Sheh, Y.; Yamashita, Y.; Yoshida, H.; Adams, R.; Simpson, N.; Larson, S.
1987-04-01
The Cyclotron staff at the National Institutes of Health is involved in a comprehensive radionuclide preparation program which culminates with the formulation of numerous requested short-lived radiopharmaceutical agents for clinical evaluation. The existence of two cyclotrons and the requests for cyclotron-produced radionuclides, principally short-lived positron-emitting ones, necessitates an efficient and cost-effective program. The clinical need for 15O labelled water exemplifies the modification and effective coupling of two supplied gas target systems without detriment to either individual product. 15O labeled oxygen, produced from the 14N(d,n) 15O nuclear reaction, is combined with the target gas for 11C labelled cyanide production through standard fittings to achieve the chemical oxidation. The system allows an "on-line" product of extremely high yield and excellent radionuclidic purity. The operational characteristics of the redesigned commercial cyclotron targetry system and the radiochemical considerations are presented.
Validation of laboratory-scale recycling test method of paper PSA label products
Carl Houtman; Karen Scallon; Richard Oldack
2008-01-01
Starting with test methods and a specification developed by the U.S. Postal Service (USPS) Environmentally Benign Pressure Sensitive Adhesive Postage Stamp Program, a laboratory-scale test method and a specification were developed and validated for pressure-sensitive adhesive labels, By comparing results from this new test method and pilot-scale tests, which have been...
ERIC Educational Resources Information Center
Sitlington, Patricia L.; And Others
This study investigated the adult adjustment of a statewide random sample of 737 Iowa individuals with learning disabilities, 59 individuals labeled behaviorally disordered, and 142 individuals labeled mentally disabled, all graduates of special education resource teaching programs. Results are reported in terms of: (1) general status information,…
2011-01-01
Background The present study assessed malaria RDT kits for adequate and correct packaging, design and labelling of boxes and components. Information inserts were studied for readability and accuracy of information. Methods Criteria for packaging, design, labelling and information were compiled from Directive 98/79 of the European Community (EC), relevant World Health Organization (WHO) documents and studies on end-users' performance of RDTs. Typography and readability level (Flesch-Kincaid grade level) were assessed. Results Forty-two RDT kits from 22 manufacturers were assessed, 35 of which had evidence of good manufacturing practice according to available information (i.e. CE-label affixed or inclusion in the WHO list of ISO13485:2003 certified manufacturers). Shortcomings in devices were (i) insufficient place for writing sample identification (n = 40) and (ii) ambiguous labelling of the reading window (n = 6). Buffer vial labels were lacking essential information (n = 24) or were of poor quality (n = 16). Information inserts had elevated readability levels (median Flesch Kincaid grade 8.9, range 7.1 - 12.9) and user-unfriendly typography (median font size 8, range 5 - 10). Inadequacies included (i) no referral to biosafety (n = 18), (ii) critical differences between depicted and real devices (n = 8), (iii) figures with unrealistic colours (n = 4), (iv) incomplete information about RDT line interpretations (n = 31) and no data on test characteristics (n = 8). Other problems included (i) kit names that referred to Plasmodium vivax although targeting a pan-species Plasmodium antigen (n = 4), (ii) not stating the identity of the pan-species antigen (n = 2) and (iii) slight but numerous differences in names displayed on boxes, device packages and information inserts. Three CE labelled RDT kits produced outside the EC had no authorized representative affixed and the shape and relative dimensions of the CE symbol affixed did not comply with the Directive 98/79/EC. Overall, RDTs with evidence of GMP scored better compared to those without but inadequacies were observed in both groups. Conclusion Overall, malaria RDTs showed shortcomings in quality of construction, design and labelling of boxes, device packages, devices and buffers. Information inserts were difficult to read and lacked relevant information. PMID:21314992
Diagnostic labels of NANDA-I in a southern region of Spain
González-Rodríguez, Rafael; Martelo-Baro, María de los Ángeles; Bas-Sarmiento, Pilar
2017-01-01
ABSTRACT Objective: to determine the incidence of NANDA-I diagnostic labels (North American Nursing Diagnosis Association-International) and to establish the distribution of cases of assistance and the associated labels, according to sociodemographic variables (age and sex). Method: descriptive, cross-sectional epidemiological study of labels of NANDA-I, under ecological design. The distribution of labels was analyzed according to sex and age; the corresponding frequencies were calculated and for each label the incidence were calculated rates with aggregate data from the attended cases. Results: the total number of cases of care under study was 9,928 (41.65% men and 58.35% women). The identified labels were 16,456 (7,084 men and 9,372 women); average of 1.7 labels per case of care; Out of 216 labels proposed by NANDA-I, in its 2012-14 classification, 152 were used, representing 70.4%. The labels with the highest incidence rates per thousand inhabitants were: Anxiety, Willingness to Improve Knowledge and Risk of Infection. Conclusions: the study allowed detecting, through NANDA-I, the answers to the health problems of greater incidence in the users attended. PMID:28614433
Instructional Variability in Bilingual Education Programs: Time of Year, Raters, and Content
ERIC Educational Resources Information Center
Branum-Martin, Lee; Mehta, Paras D.; Carlson, Coleen D.; Francis, David J.; Foorman, Barbara R.
2012-01-01
There are many types of programs for Spanish speaking students in the US, with varying methods and goals. Some preliminary work suggests that bilingual classrooms may differ widely in instruction, even under the same program labels. However, there are few studies which have compared the extent to which various bilingual program models differ in…
Association of Perception of Front-of-Pack Labels with Dietary, Lifestyle and Health Characteristics
Méjean, Caroline; Macouillard, Pauline; Péneau, Sandrine; Lassale, Camille; Hercberg, Serge; Castetbon, Katia
2014-01-01
Objective To identify patterns of perception of front-of-pack (FOP) nutrition labels and determine dietary, lifestyle and health profiles related to such patterns. Design Cross-sectional. Participants/Setting 28,952 French adults participating in the web-based Nutrinet-Santé cohort. Outcome measures Perception was measured using indicators of understanding and acceptability for three simple FOP labels (“green tick”, the logo of the French Nutrition and Health Program and “simple traffic lights” (STL)), and two detailed FOP formats (“multiple traffic lights” (MTL) and “color range” logo (CR)), placed on ready-to-eat soup packages. Dietary intake data were collected using three web-based 24 h records. Statistical analyses Associations of perception patterns with individual characteristics, including diet, lifestyle and health status, were examined using analysis of covariance and logistic regression, adjusted for socio-demographic and economic factors. Results No clear trend emerged concerning differences in dietary intake between perception groups. Low physical activity and obesity were more frequent in the ‘favorable to STL’ group (respectively, 20.7% and 10.7%). The ‘favorable to MTL’ group included the highest percentage of individuals who declared type 2 diabetes (2.2%). Persons with hypertension were proportionally more numerous in the ‘favorable to MTL’ and the ‘favorable to CR logo’ groups (respectively, 9.5% and 9.3%). Conclusions After adjustment for socio-demographic and economic factors, no FOP label stood out as being more suitable than another for reaching populations with poor diet. However, both STL and MTL may be most appropriate for increasing awareness of healthy eating among groups at higher risk of nutrition-related chronic diseases. PMID:24621617
A Communication Program for Enhancing Interaction in Families with a Hearing-Impaired Child.
ERIC Educational Resources Information Center
Schoenwald-Oberbeck, Beth
1984-01-01
A communication program for four families with a hearing-impaired child integrated positive communicative dimensions with issues related to this population. Findings indicate that the program had beneficial effects including improved awareness skills, the ability to label feelings and skills, increased perceptions of family cohesiveness, and…
Validation of a Poison Prevention Program.
ERIC Educational Resources Information Center
Gill, Noel C.; Braden, Barbara T.
Two way analyses of variance and cross-group descriptive comparisons assessed the effectiveness of the Siop Poison Prevention Program, which included an educational program and the use of warning labels, on improving verbal and visual discrimination of poisonous and nonpoisonous products for preschool children. The study sample consisted of 156…
Novel cyanine dyes with vinylsulfone group for labeling biomolecules.
Park, Jin Woo; Kim, YoungSoo; Lee, Kee-Jung; Kim, Dong Jin
2012-03-21
Novel vinylsulfone cyanine dyes (em. 550-850 nm) were designed and synthesized for fluorescent labeling of biomolecules via 1,2-addition reaction in aqueous conditions. Due to the virtue of chemical structures of both fluorophore and reactive group, these dyes could be significantly stable and reactive in various aqueous/organic conditions. A wide variety of pH, temperature, buffer concentration, and protein were tested for the optimal labeling condition.
Decal Process Document and Catalog
NASA Technical Reports Server (NTRS)
1999-01-01
The Decal Process Document and Catalog, JSC 27260 is the standard flight decal catalog, complete with illustrations and part numbers. As hardware developers identify labels that have common applicability across end items, these labels can be evaluated for "standard decal classification" and entered into the decal catalog for general use. The hardware developer must have a label design that meets current, applicable labeling requirements, and submit to the Decal Design and Production Facility (DDPF) as a standard label candidate. Upon approval, the label will be added to the decal catalog. The Decal Process Document and Catalog provides a selection of decals from which the NASA and NASA contractor customers can easily order. The decals shown in the catalog have been previously produced and have released engineering/fabrication drawings on file in the (DDPF). A released drawing is required before a decal can be produced or placed into the catalog. Some decals included in the catalog have a common applicability and are used in various NASA vehicles/habitats. It is the intent of the DDPF to maintain this catalog as a "living document" to which decals/placards can be added as they are repeatedly used. The advantage of identifYing flight decals in this catalog is that a released drawing is already in place, and the products will be flight certified.
Manifold Regularized Experimental Design for Active Learning.
Zhang, Lining; Shum, Hubert P H; Shao, Ling
2016-12-02
Various machine learning and data mining tasks in classification require abundant data samples to be labeled for training. Conventional active learning methods aim at labeling the most informative samples for alleviating the labor of the user. Many previous studies in active learning select one sample after another in a greedy manner. However, this is not very effective because the classification models has to be retrained for each newly labeled sample. Moreover, many popular active learning approaches utilize the most uncertain samples by leveraging the classification hyperplane of the classifier, which is not appropriate since the classification hyperplane is inaccurate when the training data are small-sized. The problem of insufficient training data in real-world systems limits the potential applications of these approaches. This paper presents a novel method of active learning called manifold regularized experimental design (MRED), which can label multiple informative samples at one time for training. In addition, MRED gives an explicit geometric explanation for the selected samples to be labeled by the user. Different from existing active learning methods, our method avoids the intrinsic problems caused by insufficiently labeled samples in real-world applications. Various experiments on synthetic datasets, the Yale face database and the Corel image database have been carried out to show how MRED outperforms existing methods.
Han, Ji Won; Son, Kyung Lak; Byun, Hye Jin; Ko, Ji Won; Kim, Kayoung; Hong, Jong Woo; Kim, Tae Hyun; Kim, Ki Woong
2017-06-06
Spaced retrieval training (SRT) is a nonpharmacological intervention for mild cognitive impairment (MCI) and dementia that trains the learning and retention of target information by recalling it over increasingly long intervals. We recently developed the Ubiquitous Spaced Retrieval-based Memory Advancement and Rehabilitation Training (USMART) program as a convenient, self-administered tablet-based SRT program. We also demonstrated the utility of USMART for improving memory in individuals with MCI through an open-label uncontrolled trial. This study had an open-label, single-blind, randomized, controlled, two-period crossover design. Fifty patients with MCI were randomized into USMART-usual care and usual care-USMART treatment sequences. USMART was completed or usual care was provided biweekly over a 4-week treatment period with a 2-week washout period between treatment periods. Primary outcome measures included the Word List Memory Test, Word List Recall Test (WLRT), and Word List Recognition Test. Outcomes were measured at baseline, week 5, and week 11 by raters who were blinded to intervention type. An intention-to-treat analysis and linear mixed modeling were used. Of 50 randomized participants, 41 completed the study (18% dropout rate). The USMART group had larger improvements in WLRT score (effect size = 0.49, p = 0.031) than the usual care group. There were no significant differences in other primary or secondary measures between the USMART and usual care groups. Moreover, no USMART-related adverse events were reported. The 4-week USMART modestly improved information retrieval in older people with MCI, and was well accepted with minimal technical support. ClinicalTrials.gov NCT01688128 . Registered 12 September 2012.
Basso, Frédéric; Bouillé, Julien; Le Goff, Kévin; Robert-Demontrond, Philippe; Oullier, Olivier
2016-01-01
Food imitating products are chemical consumer items used frequently in the household for cleaning and personal hygiene (e.g., bleach, soap, and shampoo), which resemble food products. Their containers replicate elements of food package design such as possessing a shape close in style to drinking product containers or bearing labels that depict colorful fruits. In marketing, these incongruent forms are designed to increase the appeal of functional products, leading to chemical consumer product embellishment. However, due to the resulting visual ambiguity, food imitating products may expose consumers to the risk of being poisoned from ingestion. Thus, from a public health perspective, food imitating products are considered dangerous chemical products that should not be sold, and may merit being recalled for the safety of consumers. To help policymakers address the hazardous presence of food imitating products, the purpose of this article is to identify the specific design features that generate most ambiguity for the consumer, and therefore increase the likelihood of confusion with foodstuffs. Among the visual elements of food packaging, the two most important features (shape and label) are manipulated in a series of three lab studies combining six Implicit Association Tests (IATs) and two explicit measures on products' drinkability and safety. IATs were administered to assess consumers' implicit association of liquid products with tastiness in a within-subject design in which the participants (N = 122) were presented with two kinds of food imitating products with a drink shape or drink label compared with drinks (experiential products with congruent form) and classic chemical products (hygiene products) (functional products with congruent form). Results show that chemical consumer products with incongruent drink shapes (but not drink labels) as an element of food package design are both implicitly associated with tastiness and explicitly judged as safe and drinkable. These results require confirmation in other studies involving different shapes and labels. Notwithstanding, due to the misleading effect of this ambiguity, public health authorities are thus well advised to focus their market surveillance on chemical products emulating a food or drink shape. PMID:27065919
Willman, Britta; Grankvist, Kjell; Bölenius, Karin
2018-05-11
When performed erroneously, the venous blood specimen collection (VBSC) practice steps patient identification, test request management and test tube labeling are at high risk to jeopardize patient safety. VBSC educational programs with the intention to minimize risk of harm to patients are therefore needed. In this study, we evaluate the efficiency of a large-scale online e-learning program on personnel's adherence to VBSC practices and their experience of the e-learning program. An interprofessional team transformed an implemented traditional VBSC education program to an online e-learning program developed to stimulate reflection with focus on the high-risk practice steps. We used questionnaires to evaluate the effect of the e-learning program on personnel's self-reported adherence to VBSC practices compared to questionnaire surveys before and after introduction of the traditional education program. We used content analysis to evaluate the participants free text experience of the VBSC e-learning program. Adherence to the VBSC guideline high-risk practice steps generally increased following the implementation of a traditional educational program followed by an e-learning program. We however found a negative trend over years regarding participation rates and the practice to always send/sign the request form following the introduction of an electronic request system. The participants were in general content with the VBSC e-learning program. Properly designed e-learning programs on VBSC practices supersedes traditional educational programs in usefulness and functionality. Inclusion of questionnaires in the e-learning program is necessary for follow-up of VBSC participant's practices and educational program efficiency.
76 FR 6319 - Designation of Biobased Items for Federal Procurement
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-04
... to have retroactive effect, and does not involve administrative appeals. D. Executive Order 13132... at: http://www.biopreferred.gov . * * * (b) Advertising, labeling and marketing claims. Manufacturers and vendors are reminded that their advertising, labeling, and other marketing claims, including...
Bhansali, Archita H; Sangani, Darshan S; Mhatre, Shivani K; Sansgiry, Sujit S
2018-01-01
To compare three over-the-counter (OTC) Drug Facts panel versions for information processing optimization among college students. University of Houston students (N = 210) participated in a cross-sectional survey from January to May 2010. A current FDA label was compared to two experimental labels developed using the theory of CHREST to test information processing by re-positioning the warning information within the Drug Facts panel. Congruency was defined as placing like information together. Information processing was evaluated using the OTC medication Label Evaluation Process Model (LEPM): label comprehension, ease-of-use, attitude toward the product, product evaluation, and purchase intention. Experimental label with chunked congruent information (uses-directions-other information-warnings) was rated significantly higher than the current FDA label and had the best average scores among the LEPM information processing variables. If replications uphold these findings, the FDA label design might be revised to improve information processing.
Assessing Attentional Prioritization of Front-of-Pack Nutrition Labels using Change Detection
Becker, Mark W.; Sundar, Raghav Prashant; Bello, Nora; Alzahabi, Reem; Weatherspoon, Lorraine; Bix, Laura
2015-01-01
We used a change detection method to evaluate attentional prioritization of nutrition information that appears in the traditional “Nutrition Facts Panel” and in front-of-pack nutrition labels. Results provide compelling evidence that front-of-pack labels attract attention more readily than the Nutrition Facts Panel, even when participants are not specifically tasked with searching for nutrition information. Further, color-coding the relative nutritional value of key nutrients within the front-of-pack label resulted in increased attentional prioritization of nutrition information, but coding using facial icons did not significantly increase attention to the label. Finally, the general pattern of attentional prioritization across front-of-pack designs was consistent across a diverse sample of participants. Our results indicate that color-coded, front-of-pack nutrition labels increase attention to the nutrition information of packaged food, a finding that has implications for current policy discussions regarding labeling change. PMID:26851468
Control of microtubule trajectory within an electric field by altering surface charge density
Isozaki, Naoto; Ando, Suguru; Nakahara, Tasuku; Shintaku, Hirofumi; Kotera, Hidetoshi; Meyhöfer, Edgar; Yokokawa, Ryuji
2015-01-01
One of challenges for using microtubules (MTs) driven by kinesin motors in microfluidic environments is to control their direction of movement. Although applying physical biases to rectify MTs is prevalent, it has not been established as a design methodology in conjunction with microfluidic devices. In the future, the methodology is expected to achieve functional motor-driven nanosystems. Here, we propose a method to guide kinesin-propelled MTs in multiple directions under an electric field by designing a charged surface of MT minus ends labeled with dsDNA via a streptavidin-biotin interaction. MTs labeled with 20-bp or 50-bp dsDNA molecules showed significantly different trajectories according to the DNA length, which were in good agreement with values predicted from electrophoretic mobilities measured for their minus ends. Since the effective charge of labeled DNA molecules was equal to that of freely dispersed DNA molecules in a buffer solution, MT trajectory could be estimated by selecting labeling molecules with known charges. Moreover, the estimated trajectory enables to define geometrical sizes of a microfluidic device. This rational molecular design and prediction methodology allows MTs to be guided in multiple directions, demonstrating the feasibility of using molecular sorters driven by motor proteins. PMID:25567007
Control of microtubule trajectory within an electric field by altering surface charge density.
Isozaki, Naoto; Ando, Suguru; Nakahara, Tasuku; Shintaku, Hirofumi; Kotera, Hidetoshi; Meyhöfer, Edgar; Yokokawa, Ryuji
2015-01-08
One of challenges for using microtubules (MTs) driven by kinesin motors in microfluidic environments is to control their direction of movement. Although applying physical biases to rectify MTs is prevalent, it has not been established as a design methodology in conjunction with microfluidic devices. In the future, the methodology is expected to achieve functional motor-driven nanosystems. Here, we propose a method to guide kinesin-propelled MTs in multiple directions under an electric field by designing a charged surface of MT minus ends labeled with dsDNA via a streptavidin-biotin interaction. MTs labeled with 20-bp or 50-bp dsDNA molecules showed significantly different trajectories according to the DNA length, which were in good agreement with values predicted from electrophoretic mobilities measured for their minus ends. Since the effective charge of labeled DNA molecules was equal to that of freely dispersed DNA molecules in a buffer solution, MT trajectory could be estimated by selecting labeling molecules with known charges. Moreover, the estimated trajectory enables to define geometrical sizes of a microfluidic device. This rational molecular design and prediction methodology allows MTs to be guided in multiple directions, demonstrating the feasibility of using molecular sorters driven by motor proteins.
Multi-objective experimental design for (13)C-based metabolic flux analysis.
Bouvin, Jeroen; Cajot, Simon; D'Huys, Pieter-Jan; Ampofo-Asiama, Jerry; Anné, Jozef; Van Impe, Jan; Geeraerd, Annemie; Bernaerts, Kristel
2015-10-01
(13)C-based metabolic flux analysis is an excellent technique to resolve fluxes in the central carbon metabolism but costs can be significant when using specialized tracers. This work presents a framework for cost-effective design of (13)C-tracer experiments, illustrated on two different networks. Linear and non-linear optimal input mixtures are computed for networks for Streptomyces lividans and a carcinoma cell line. If only glucose tracers are considered as labeled substrate for a carcinoma cell line or S. lividans, the best parameter estimation accuracy is obtained by mixtures containing high amounts of 1,2-(13)C2 glucose combined with uniformly labeled glucose. Experimental designs are evaluated based on a linear (D-criterion) and non-linear approach (S-criterion). Both approaches generate almost the same input mixture, however, the linear approach is favored due to its low computational effort. The high amount of 1,2-(13)C2 glucose in the optimal designs coincides with a high experimental cost, which is further enhanced when labeling is introduced in glutamine and aspartate tracers. Multi-objective optimization gives the possibility to assess experimental quality and cost at the same time and can reveal excellent compromise experiments. For example, the combination of 100% 1,2-(13)C2 glucose with 100% position one labeled glutamine and the combination of 100% 1,2-(13)C2 glucose with 100% uniformly labeled glutamine perform equally well for the carcinoma cell line, but the first mixture offers a decrease in cost of $ 120 per ml-scale cell culture experiment. We demonstrated the validity of a multi-objective linear approach to perform optimal experimental designs for the non-linear problem of (13)C-metabolic flux analysis. Tools and a workflow are provided to perform multi-objective design. The effortless calculation of the D-criterion can be exploited to perform high-throughput screening of possible (13)C-tracers, while the illustrated benefit of multi-objective design should stimulate its application within the field of (13)C-based metabolic flux analysis. Copyright © 2015 Elsevier Inc. All rights reserved.
Mead, Erin L; Cohen, Joanna E; Kennedy, Caitlin E; Gallo, Joseph; Latkin, Carl A
2016-01-01
Health communication theories indicate that messages depicting efficacy and threat might promote behavior change by enhancing individuals' efficacy beliefs and risk perceptions, but this has received little attention in graphic warning label research. We explored low socioeconomic status (SES) smokers' perceptions of theory-based graphic warning labels to inform the development of labels to promote smoking cessation. Twelve graphic warning labels were developed with self-efficacy and response efficacy messages paired with messages portraying high, low, or no threat from smoking. Self-efficacy messages were designed to promote confidence in ability to quit, while response efficacy messages were designed to promote confidence in the ability of the Quitline to aid cessation. From January - February 2014, we conducted in-depth interviews with 25 low SES adult men and women smokers in Baltimore, Maryland, U.S. Participants discussed the labels' role in their self-efficacy beliefs, response efficacy beliefs about the Quitline, and risk perceptions (including perceived severity of and susceptibility to disease). Data were analyzed through framework analysis, a type of thematic analysis. Efficacy messages in which participants vicariously experienced the characters' quit successes were reported as most influential to self-efficacy beliefs. Labels portraying a high threat were reported as most influential to participants' perceived severity of and susceptibility to smoking risks. Self-efficacy messages alone and paired with high threat were seen as most influential on self-efficacy beliefs. Labels portraying the threat from smoking were most motivational for calling the Quitline, followed by labels showing healthy role models who had successfully quit using the Quitline. Role model-based efficacy messages might enhance the effectiveness of labels by making smokers' self-efficacy beliefs about quitting most salient and enhancing the perceived efficacy of the Quitline. Threatening messages play an important role in enhancing risk perceptions, but findings suggest that efficacy messages are also important in the impact of labels on beliefs and motivation. Our findings could aid in the development of labels to address smoking disparities among low SES populations in the U.S.
REFGEN and TREENAMER: Automated Sequence Data Handling for Phylogenetic Analysis in the Genomic Era
Leonard, Guy; Stevens, Jamie R.; Richards, Thomas A.
2009-01-01
The phylogenetic analysis of nucleotide sequences and increasingly that of amino acid sequences is used to address a number of biological questions. Access to extensive datasets, including numerous genome projects, means that standard phylogenetic analyses can include many hundreds of sequences. Unfortunately, most phylogenetic analysis programs do not tolerate the sequence naming conventions of genome databases. Managing large numbers of sequences and standardizing sequence labels for use in phylogenetic analysis programs can be a time consuming and laborious task. Here we report the availability of an online resource for the management of gene sequences recovered from public access genome databases such as GenBank. These web utilities include the facility for renaming every sequence in a FASTA alignment file, with each sequence label derived from a user-defined combination of the species name and/or database accession number. This facility enables the user to keep track of the branching order of the sequences/taxa during multiple tree calculations and re-optimisations. Post phylogenetic analysis, these webpages can then be used to rename every label in the subsequent tree files (with a user-defined combination of species name and/or database accession number). Together these programs drastically reduce the time required for managing sequence alignments and labelling phylogenetic figures. Additional features of our platform include the automatic removal of identical accession numbers (recorded in the report file) and generation of species and accession number lists for use in supplementary materials or figure legends. PMID:19812722
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Labeling and Recordkeeping Requirements for New Stationary Emergency Engines 5 Table 5 to Subpart IIII of Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance fo...
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Labeling and Recordkeeping Requirements for New Stationary Emergency Engines 5 Table 5 to Subpart IIII of Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance fo...
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Labeling and Recordkeeping Requirements for New Stationary Emergency Engines 5 Table 5 to Subpart IIII of Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance fo...
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Labeling and Recordkeeping Requirements for New Stationary Emergency Engines 5 Table 5 to Subpart IIII of Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance fo...
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Labeling and Recordkeeping Requirements for New Stationary Emergency Engines 5 Table 5 to Subpart IIII of Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance fo...
75 FR 10740 - New Car Assessment Program (NCAP); Safety Labeling
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-09
... separated from each other by a dark line that is a minimum of 3 points in width. Also as is currently required, the entire safety rating label would be required to be surrounded by a solid dark line that is a... dark background. \\4\\ The full study report is available at http://www.regulations.gov in Docket No...
LED Lighting Facts® Program Supports Accuracy in SSL Product Information
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
Fact sheet that provides a summary of LED Lighting Facts, a program to assure that LED lighting is accurately represented in the marketplace, illustrated by the LED Lighting Facts label to disclose product performance data.
Mixtures Equation Pilot Program to Reduce Animal Testing
EPA is announcing the start of a pilot program to evaluate the usefulness and acceptability of a mathematical tool (the GHS Mixtures Equation), which is used in the Globally Harmonized System of Classification and Labeling of Chemicals (GHS).
76 FR 6366 - Designation of Biobased Items for Federal Procurement
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-04
... not involve administrative appeals. D. Executive Order 13132: Federalism This proposed rule does not....biopreferred.gov . * * * (b) Advertising, labeling and marketing claims. Manufacturers and vendors are reminded that their advertising, labeling, and other marketing claims, including claims regarding health and...
Structure of the knowledge base for an expert labeling system
NASA Technical Reports Server (NTRS)
Rajaram, N. S.
1981-01-01
One of the principal objectives of the NASA AgRISTARS program is the inventory of global crop resources using remotely sensed data gathered by Land Satellites (LANDSAT). A central problem in any such crop inventory procedure is the interpretation of LANDSAT images and identification of parts of each image which are covered by a particular crop of interest. This task of labeling is largely a manual one done by trained human analysts and consequently presents obstacles to the development of totally automated crop inventory systems. However, development in knowledge engineering as well as widespread availability of inexpensive hardware and software for artificial intelligence work offers possibilities for developing expert systems for labeling of crops. Such a knowledge based approach to labeling is presented.
Impact of Health Labels on Flavor Perception and Emotional Profiling: A Consumer Study on Cheese
Schouteten, Joachim J.; De Steur, Hans; De Pelsmaeker, Sara; Lagast, Sofie; De Bourdeaudhuij, Ilse; Gellynck, Xavier
2015-01-01
The global increase of cardiovascular diseases is linked to the shift towards unbalanced diets with increasing salt and fat intake. This has led to a growing consumers’ interest in more balanced food products, which explains the growing number of health-related claims on food products (e.g., “low in salt” or “light”). Based on a within-subjects design, consumers (n = 129) evaluated the same cheese product with different labels. Participants rated liking, saltiness and fat flavor intensity before and after consuming four labeled cheeses. Even though the cheese products were identical, inclusion of health labels influenced consumer perceptions. Cheese with a “light” label had a lower overall expected and perceived liking compared to regular cheese. Although cheese with a “salt reduced” label had a lower expected liking compared to regular cheese, no lower liking was found when consumers actually consumed the labeled cheese. All labels also influenced the perceived intensities of the attributes related to these labels, e.g., for example salt intensity for reduced salt label. While emotional profiles of the labeled cheeses differed before tasting, little differences were found when actual tasting these cheeses. In conclusion, this study shows that health-related labels might influence the perceived flavor and emotional profiles of cheese products. PMID:26690211
NASA Technical Reports Server (NTRS)
Peters, C.; Kampe, F. (Principal Investigator)
1980-01-01
The mathematical description and implementation of the statistical estimation procedure known as the Houston integrated spatial/spectral estimator (HISSE) is discussed. HISSE is based on a normal mixture model and is designed to take advantage of spectral and spatial information of LANDSAT data pixels, utilizing the initial classification and clustering information provided by the AMOEBA algorithm. The HISSE calculates parametric estimates of class proportions which reduce the error inherent in estimates derived from typical classify and count procedures common to nonparametric clustering algorithms. It also singles out spatial groupings of pixels which are most suitable for labeling classes. These calculations are designed to aid the analyst/interpreter in labeling patches with a crop class label. Finally, HISSE's initial performance on an actual LANDSAT agricultural ground truth data set is reported.
To label or not to label: applications of quantitative proteomics in neuroscience research.
Filiou, Michaela D; Martins-de-Souza, Daniel; Guest, Paul C; Bahn, Sabine; Turck, Christoph W
2012-02-01
Proteomics has provided researchers with a sophisticated toolbox of labeling-based and label-free quantitative methods. These are now being applied in neuroscience research where they have already contributed to the elucidation of fundamental mechanisms and the discovery of candidate biomarkers. In this review, we evaluate and compare labeling-based and label-free quantitative proteomic techniques for applications in neuroscience research. We discuss the considerations required for the analysis of brain and central nervous system specimens, the experimental design of quantitative proteomic workflows as well as the feasibility, advantages, and disadvantages of the available techniques for neuroscience-oriented questions. Furthermore, we assess the use of labeled standards as internal controls for comparative studies in humans and review applications of labeling-based and label-free mass spectrometry approaches in relevant model organisms and human subjects. Providing a comprehensive guide of feasible and meaningful quantitative proteomic methodologies for neuroscience research is crucial not only for overcoming current limitations but also for gaining useful insights into brain function and translating proteomics from bench to bedside. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
GEO Label Web Services for Dynamic and Effective Communication of Geospatial Metadata Quality
NASA Astrophysics Data System (ADS)
Lush, Victoria; Nüst, Daniel; Bastin, Lucy; Masó, Joan; Lumsden, Jo
2014-05-01
We present demonstrations of the GEO label Web services and their integration into a prototype extension of the GEOSS portal (http://scgeoviqua.sapienzaconsulting.com/web/guest/geo_home), the GMU portal (http://gis.csiss.gmu.edu/GADMFS/) and a GeoNetwork catalog application (http://uncertdata.aston.ac.uk:8080/geonetwork/srv/eng/main.home). The GEO label is designed to communicate, and facilitate interrogation of, geospatial quality information with a view to supporting efficient and effective dataset selection on the basis of quality, trustworthiness and fitness for use. The GEO label which we propose was developed and evaluated according to a user-centred design (UCD) approach in order to maximise the likelihood of user acceptance once deployed. The resulting label is dynamically generated from producer metadata in ISO or FDGC format, and incorporates user feedback on dataset usage, ratings and discovered issues, in order to supply a highly informative summary of metadata completeness and quality. The label was easily incorporated into a community portal as part of the GEO Architecture Implementation Programme (AIP-6) and has been successfully integrated into a prototype extension of the GEOSS portal, as well as the popular metadata catalog and editor, GeoNetwork. The design of the GEO label was based on 4 user studies conducted to: (1) elicit initial user requirements; (2) investigate initial user views on the concept of a GEO label and its potential role; (3) evaluate prototype label visualizations; and (4) evaluate and validate physical GEO label prototypes. The results of these studies indicated that users and producers support the concept of a label with drill-down interrogation facility, combining eight geospatial data informational aspects, namely: producer profile, producer comments, lineage information, standards compliance, quality information, user feedback, expert reviews, and citations information. These are delivered as eight facets of a wheel-like label, which are coloured according to metadata availability and are clickable to allow a user to engage with the original metadata and explore specific aspects in more detail. To support this graphical representation and allow for wider deployment architectures we have implemented two Web services, a PHP and a Java implementation, that generate GEO label representations by combining producer metadata (from standard catalogues or other published locations) with structured user feedback. Both services accept encoded URLs of publicly available metadata documents or metadata XML files as HTTP POST and GET requests and apply XPath and XSLT mappings to transform producer and feedback XML documents into clickable SVG GEO label representations. The label and services are underpinned by two XML-based quality models. The first is a producer model that extends ISO 19115 and 19157 to allow fuller citation of reference data, presentation of pixel- and dataset- level statistical quality information, and encoding of 'traceability' information on the lineage of an actual quality assessment. The second is a user quality model (realised as a feedback server and client) which allows reporting and query of ratings, usage reports, citations, comments and other domain knowledge. Both services are Open Source and are available on GitHub at https://github.com/lushv/geolabel-service and https://github.com/52North/GEO-label-java. The functionality of these services can be tested using our GEO label generation demos, available online at http://www.geolabel.net/demo.html and http://geoviqua.dev.52north.org/glbservice/index.jsf.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fowler, J.S.; Wolf, A.P.
1982-09-01
Carbon 11, Fluorine 18, and Nitrogen 13-labeled radiotracers are reviewed from the standpoint of synthetic organic chemistry while keeping in perspective the necessity of integrating the organic chemistry with the design and ultimate application of the radiotracer. The reactions used, the principles used to adapt these reactions to labeling with short-lived radionuclides, and the concepts of chemical reactivity form the framework upon which synthetic strategies for short-lived radiotracers are developed. Potentially new routes are suggested which may be applied to problems in labeling organic molecules. (ACR)
Speaking Across the Curriculum: Threat, Opportunity, or Both?
ERIC Educational Resources Information Center
Palmerton, Patricia R.
"Speaking Across the Curriculum" (SAC) has become a catch-all label for a variety of programs aimed at teaching oral communication skills to a large body of students in settings other than the typical public speaking class. Such programs offer both threats and opportunities to the speech field. In many programs, faculty in other…
Regulatory considerations of occupational tuberculosis control.
McDiarmid, M A; Gillen, N A; Hathon, L
1994-01-01
The authors argue that the classic hierarchy of industrial hygiene controls may be successfully used to control TB. Various elements of hygiene control programs reviewed here include TB exposure control programs, identification and isolation of patients, respiratory isolation, local source capture ventilation, laboratory procedures, employee surveillance programs, reporting of occupational illnesses, labeling requirements, and respiratory protection.
Toward enhanced learning of science: An educational scheme for informal science institutions
NASA Astrophysics Data System (ADS)
Suzuki, Midori
Current educational operation for informal science institutions tend to be based on the staff's experience and intuition rather than on educational theories or research findings. This status study sought research evidence for an educational scheme to give informal science institutions. Evidence for this scheme came from surveys to determine specific circumstances of educational operations and visitor behaviors. The Provus discrepancy model, seeking gaps between the actual and desired states, guided this investigation of how informal science education institution staff view the nature and status of educational operations. Another investigation sought visitors' views of the effectiveness of the main idea for exhibit understanding (n=68 for each group of with the main idea and without the main idea), effective labels (n=68), expectations toward on-site lessons(n=22 and 65 for student groups, and n=2 for teachers), and possibilities for assessments of museum operations. Institutional data were collected via a web portal, with a separate site created for administrators (n=41), exhibit developers (n=21), and program planners (n=35). The survey asked about actual and desired states in terms of goals and roles of staff, contents of exhibits and programs, assessment, and professional development. The four visitor surveys were administered individually at the North Carolina Museum of Natural Sciences. The institutional survey found that most institutions focus on attitudinal reinforcement rather than visitor learning, do not overtly value research or long-term assessment, and value partnerships with K-12 schools more than other groups. It is also clarified that the staff do not have a clear vision of the nature or function of an operations manuals. Large gaps were found between the actual and desired states in terms of assessment (administrators, exhibit developers, and program planners), professional development (exhibit developers and program planners), and partnerships (program planners), indicating that their current visions and attempts are not consistent and may need improvement. The survey of effective labels did not find a preference for any one particular type of label, and although visitors prefer concise labels, they perceive "being concise" in a variety of ways. Student visitor expectations toward on-site lessons closely matched that of their teachers, which is for science learning beyond the classroom. Assessment of daily operation indicated that a tailored design for long-term assessments could overcome perceived drawbacks of feasibility (for the staff to interpret the results and for the visitors to fill in the survey) and measurement of visitor learning. No statistically significant difference was found between respondents who were provided the main exhibit ideas those who were not. Four notions were generated from these five surveys: (1) Assessment instruments must include evaluation of visitor learning as well as their state of mind of them; (2) Staff professional development sessions must include acquisition of assessment skills and general knowledge in science and science education; (3) K-12 partnerships can be an initial step in bridging between institutions and their visitors; and (4) An operations manual could help direct an informal science institutions to more effective educational operations. The importance of a fair and systematic assessment system would help achieve all these notions.
Glocker, Ben; Paragios, Nikos; Komodakis, Nikos; Tziritas, Georgios; Navab, Nassir
2007-01-01
In this paper we propose a novel non-rigid volume registration based on discrete labeling and linear programming. The proposed framework reformulates registration as a minimal path extraction in a weighted graph. The space of solutions is represented using a set of a labels which are assigned to predefined displacements. The graph topology corresponds to a superimposed regular grid onto the volume. Links between neighborhood control points introduce smoothness, while links between the graph nodes and the labels (end-nodes) measure the cost induced to the objective function through the selection of a particular deformation for a given control point once projected to the entire volume domain, Higher order polynomials are used to express the volume deformation from the ones of the control points. Efficient linear programming that can guarantee the optimal solution up to (a user-defined) bound is considered to recover the optimal registration parameters. Therefore, the method is gradient free, can encode various similarity metrics (simple changes on the graph construction), can guarantee a globally sub-optimal solution and is computational tractable. Experimental validation using simulated data with known deformation, as well as manually segmented data demonstrate the extreme potentials of our approach.
An evaluation of the directed flow graph methodology
NASA Technical Reports Server (NTRS)
Snyder, W. E.; Rajala, S. A.
1984-01-01
The applicability of the Directed Graph Methodology (DGM) to the design and analysis of special purpose image and signal processing hardware was evaluated. A special purpose image processing system was designed and described using DGM. The design, suitable for very large scale integration (VLSI) implements a region labeling technique. Two computer chips were designed, both using metal-nitride-oxide-silicon (MNOS) technology, as well as a functional system utilizing those chips to perform real time region labeling. The system is described in terms of DGM primitives. As it is currently implemented, DGM is inappropriate for describing synchronous, tightly coupled, special purpose systems. The nature of the DGM formalism lends itself more readily to modeling networks of general purpose processors.
NMR of enzymatically synthesized uniformly 13C15N-labeled DNA oligonucleotides.
Zimmer, D P; Crothers, D M
1995-01-01
A procedure for the enzymatic synthesis of uniformly 13C15N-labeled DNA oligonucleotides in milligram quantities for NMR studies is described. Deoxynucleotides obtained from microorganisms grown on 13C and 15N nutrient sources are enzymatically phosphorylated to dNTPs, and the dNTPs are incorporated into oligonucleotides using a 3'-5' exonuclease-deficient mutant of Klenow fragment of DNA polymerase I and an oligonucleotide template primer designed for efficient separation of labeled product DNA from unlabeled template. The labeling strategy has been used to uniformly label one or the other oligonucleotide strand in the DNA duplex dGGCAAAACGG.dCCGTTTTGCC in order to facilitate assignment and structure determination by NMR. Application of 15N and 13C heteronuclear NMR experiments to isotopically labeled DNA is presented. Images Fig. 2 Fig. 3 Fig. 4 PMID:7724521
First order capsules comparative arrangements
NASA Technical Reports Server (NTRS)
1963-01-01
Pen and ink views of comparative arragements of several capsules including the existing 'Big Joe' design, the compromise 'Big Joe' design, and the 'Little Joe'. All capsule designs are labeled and include dimensions.
Roberto, C A; Khandpur, N
2014-07-01
Accurate and easy-to-understand nutrition labeling is a worthy public health goal that should be considered an important strategy among many to address obesity and poor diet. Updating the Nutrition Facts Panel on packaged foods, developing a uniform front-of-package labeling system and providing consumers with nutrition information on restaurant menus offer important opportunities to educate people about food's nutritional content, increase awareness of reasonable portion sizes and motivate consumers to make healthier choices. The aims of this paper were to identify and discuss: (1) current concerns with nutrition label communication strategies; (2) opportunities to improve the communication of nutrition information via food labels, with a specific focus on serving size information; and (3) important future areas of research on nutrition labeling as a tool to improve diet. We suggest that research on nutrition labeling should focus on ways to improve food labels' ability to capture consumer attention, reduce label complexity and convey numeric nutrition information in simpler and more meaningful ways, such as through interpretive food labels, the addition of simple text, reduced use of percentages and easy-to-understand presentation of serving size information.
Synthesis and biological studies of positron-emitting radiopharmaceuticals
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dischino, D.D.
The development and clinical evaluation of two-positron emitting radiopharmaceuticals designed to image myelin in humans is reported. Carbon-11-labeled benzyl methyl ether was synthesized by the reaction of carbon-11-labeled methanol and benzyl chloride in dimethyl sulfoxide containing powdered potassium hydroxide in a radiochemical yield of 43% and a synthesis and purification time of 40 minutes. Carbon-11-labeled diphenylmethanol was synthesized by the reaction of carbon-11-labeled carbon dioxide and phenyllithium followed by the reduction of the carbon-11-labeled intermediate to diphenylmethanol via lithium aluminum hydride in a radiochemical yield of 71% and a synthesis and purification time of 38 minutes. Carbon-11-labeled benzyl methyl ethermore » and diphenylmethanol were each evaluated as myelin imaging agents in three patients with multiple sclerosis via positron-emission tomography. In two out of three patients studied with carbon-11-labeled benzyl methyl ether, the distribution of activity in the brain was not consistent with local lipid content. A new synthesis of carbon-11-labeled-DL-phenylalanine labeled in the benzylic position and the synthesis of fluorine-18-labeled 1-(2-nitro-1-imidazolyl)-3-fluoro-2-propanol, a potential in vivo marker of hypoxic tissue, are reported.« less
The Effects of Food Labelling on Postexercise Energy Intake in Sedentary Women.
Lafrenière, Jacynthe; McNeil, Jessica; Provencher, Véronique; Doucet, Éric
2017-01-01
Food labelling has been previously reported to influence energy intake (EI). Whether food labels influence postexercise EI remains to be determined. We assessed how food labelling and exercise (Ex) interact to influence food perception and postexercise EI. In this randomized crossover design, 14 inactive women participated in 4 experimental conditions: Ex (300 kcal at 70% of VO 2peak ) and lunch labelled as low in fat (LF), Ex and lunch labelled as high in fat (HF), Rest and LF, and Rest and HF. The lunch was composed of a plate of pasta, yogurt, and oatmeal cookies, which had the same nutritional composition across the 4 experimental conditions. EI at lunch and for the 48-hour period covering the testing day and the following day was assessed. Furthermore, perceived healthiness of the meal and appetite ratings were evaluated. There were no effects of exercise and food labelling on EI. However, meals labelled as LF were perceived as heathier, and this label was associated with higher prospective food consumption. Initial beliefs about food items had a stronger effect on healthiness perception than the different food labels and explain the positive correlation with the amount of food consumed ( ρ = 0.34, P < 0.001).
Psychological effectiveness of carbon labelling
NASA Astrophysics Data System (ADS)
Beattie, Geoffrey
2012-04-01
Despite the decision by supermarket-giant Tesco to delay its plan to add carbon-footprint information onto all of its 70,000 products, carbon labelling, if carefully designed, could yet change consumer behaviour. However, it requires a new type of thinking about consumers and much additional work.
Qu, Conghui; Schuetz, Johanna M.; Min, Jeong Eun; Leach, Stephen; Daley, Denise; Spinelli, John J.; Brooks-Wilson, Angela; Graham, Jinko
2011-01-01
We describe a statistical approach to predict gender-labeling errors in candidate-gene association studies, when Y-chromosome markers have not been included in the genotyping set. The approach adds value to methods that consider only the heterozygosity of X-chromosome SNPs, by incorporating available information about the intensity of X-chromosome SNPs in candidate genes relative to autosomal SNPs from the same individual. To our knowledge, no published methods formalize a framework in which heterozygosity and relative intensity are simultaneously taken into account. Our method offers the advantage that, in the genotyping set, no additional space is required beyond that already assigned to X-chromosome SNPs in the candidate genes. We also show how the predictions can be used in a two-phase sampling design to estimate the gender-labeling error rates for an entire study, at a fraction of the cost of a conventional design. PMID:22303327
Automated microbial metabolism laboratory. [Viking 75 entry vehicle and Mars
NASA Technical Reports Server (NTRS)
1974-01-01
The labeled release concept was advanced to accommodate a post- Viking mission designed to extend the search, to confirm the presence of, and to characterize any Martian life found, and to obtain preliminary information on control of the life detected. The advanced labeled release concept utilizes four test chambers, each of which contains either an active or heat sterilized sample of the Martian soil. A variety of C-14 labeled organic substrates can be added sequentially to each soil sample and the resulting evolved radioactive gas monitored. The concept can also test effects of various inhibitors and environmental parameters on the experimental response. The current Viking '75 labeled release hardware is readily adaptable to the advanced labeled release concept.
Brown, J Lynne; Ping, Yanchao
2003-02-01
To determine whether perceived benefit alters personal risk perception associated with eating genetically engineered soybeans, consumer desire for labeling, preferred phrase on a label symbol, and desired information in an educational brochure. Comparison of responses of two consumer groups who completed one of two survey versions. One hundred fifty supermarket shoppers, age 21 years and older, for each survey or n=300 total. Focus groups and a pilot test were used to develop the final survey in which consumers read a description of a genetically engineered soybean with either no obvious consumer benefit or an obvious consumer benefit and then completed a set of attitude questions and evaluated a voluntary label design and educational brochure content. Main outcome measures were mean opinion scores of personal risk and desire for labeling and ranking of desired label phrase and brochure topics. Chi;(2) and t Tests were used. Consumers reading about the soybean with obvious consumer benefit were significantly more comfortable eating these than those reading about the soybean with no obvious consumer benefit (2.9+/-1.1 vs 3.4+/-1.0, respectively; P=.001). However, the groups did not differ in desire for labeling of foods made with these soybeans or preferred brochure content. They did differ significantly in preferred phrase on the symbol (P=.05). Dietitians can use descriptions of genetic engineering applications such as those in this study to help consumers assess these applications. Dietitians can play a critical role in explaining labeling terms and designing educational materials when the FDA finalizes voluntary labeling regulations for genetically engineered foods.
Messori, A; Fadda, V; Trippoli, S
2011-04-01
National healthcare systems as well as local institutions generally reimburse numerous off-label uses of anticancer drugs, but an explicit framework for managing these payments is still lacking. As in the case of on-label uses, an optimal management of off-label uses should be aimed at a direct proportionality between cost and clinical benefit. Within this framework, assessing the incremental cost/effectiveness ratio becomes mandatory, and measuring the magnitude of the clinical benefit (e.g. gain in overall survival or progression-free survival) is essential.This paper discusses how the standard principles of cost-effectiveness and value-for-money can be applied to manage the reimbursement of off-label treatments in oncology. It also describes a detailed operational scheme to appropriately implement this aim. Two separate approaches are considered: a) a trial-based approach, which is designed for situations where enough information is available from clinical studies about the expected effectiveness of the off-label treatment; b) an individualized payment-by-results approach, which is designed for situations in which adequate information on effectiveness is lacking; this latter approach requires that each patient receiving off-label treatment is followed-up to determine individual outcomes and tailor the extent of payment to individual results.Some examples of application of both approaches are presented in detail, which have been extracted from a list of 184 off-label indications approved in 2010 by the Region of tuscany in italy. these examples support the feasibility of the two methods proposed.In conclusion, the scheme described in this paper represents an operational solution to an unsettled problem in the area of oncology drugs. © E.S.I.F.T. srl - Firenze
Acton, Rachel B; Vanderlee, Lana; White, Christine; Hammond, David
2016-10-20
Several countries have proposed changes to calorie labelling on nutrition facts tables (NFTs) on pre-packaged foods. As most research to date has examined general use of NFTs, there is a lack of evidence to guide specific design changes to calorie information on labels. This study examined the efficacy of various calorie labelling formats on recall, comprehension, and consumer preferences for calorie information. Experiments were conducted as part of an online survey with a national sample of 2,008 Canadians aged 16-24. In Task 1, participants were shown one of six labelling formats (e.g., %DV, Traffic Light) with calories in either small or large font, and asked to recall the amount of calories. Task 2 examined comprehension of calories in the context of recommended daily intake (RDI), using the same NFT as in Task 1. Task 3 identified participants' preferences for labelling formats. NFTs with calories in large font enhanced calorie recall (p < 0.001). When small font was displayed, the Traffic Light format performed best at improving recall (p < 0.01). With large font, the highest recall was in the Current, RDI and Traffic Light formats (all p < 0.05). Comprehension of servings per RDI was highest in the Infographic format, with no difference by font size (p < 0.001). Respondents preferred the large font calorie condition and the Infographic format (p < 0.001). Enhancements in visibility and design can improve the efficacy of calorie labelling on pre-packaged foods. The findings have direct implication for proposed changes to calorie labelling on NFTs in Canada and the United States.
Bleich, Sara N.; Economos, Christina D.; Spiker, Marie L.; Vercammen, Kelsey; VanEpps, Eric M.; Block, Jason P.; Elbel, Brian; Story, Mary; Roberto, Christina A.
2017-01-01
Background Evidence on the effects of restaurant calorie labeling on consumer and restaurant behavior is mixed. This paper examined: 1) consumer responses to calorie information alone or compared to modified calorie information, and 2) changes in restaurant offerings following or in advance of menu labeling implementation. Methods We searched PubMed, Web of Science, Policy File and PAIS International to identify restaurant calorie labeling studies through October 1, 2016, that measured calories ordered, consumed, or available for purchase on restaurant menus. We also searched reference lists of calorie labeling articles. Results Fifty-three studies were included: 18 in real-world restaurants, 9 in cafeterias, and 21 in laboratory or simulation settings. Five examined restaurant offerings. Conclusion Due to a lack of well-powered studies with strong designs, the degree to which menu labeling encourages lower calorie purchases and whether that translates to a healthier population is unclear. Although there is limited evidence that menu labeling affects calories purchased at fast-food restaurants, some evidence demonstrates that it lowers calories purchased at certain types of restaurants and in cafeteria settings. The limited data on modified calorie labels find that such labels can encourage lower-calorie purchases, but may not differ in effects relative to calorie labels alone. PMID:29045080
Bleich, Sara N; Economos, Christina D; Spiker, Marie L; Vercammen, Kelsey A; VanEpps, Eric M; Block, Jason P; Elbel, Brian; Story, Mary; Roberto, Christina A
2017-12-01
Evidence on the effects of restaurant calorie labeling on consumer and restaurant behavior is mixed. This paper examined: (1) consumer responses to calorie information alone or compared to modified calorie information and (2) changes in restaurant offerings following or in advance of menu labeling implementation. Searches were conducted in PubMed, Web of Science, Policy File, and PAIS International to identify restaurant calorie labeling studies through October 1, 2016, that measured calories ordered, consumed, or available for purchase on restaurant menus. The reference lists of calorie labeling articles were also searched. Fifty-three studies were included: 18 in real-world restaurants, 9 in cafeterias, and 21 in laboratory or simulation settings. Five examined restaurant offerings. Because of a lack of well-powered studies with strong designs, the degree to which menu labeling encourages lower-calorie purchases and whether that translates to a healthier population are unclear. Although there is limited evidence that menu labeling affects calories purchased at fast-food restaurants, some evidence demonstrates that it lowers calories purchased at certain types of restaurants and in cafeteria settings. The limited data on modified calorie labels find that such labels can encourage lower-calorie purchases but may not differ in effects relative to calorie labels alone. © 2017 The Obesity Society.
ERIC Educational Resources Information Center
Seaman, Michael
2012-01-01
Anti-bullying is much more than pointing fingers and labeling perpetrators. Teens who are labeled as bullies are unlikely to simply change their ways just because they have been accused of bullying. Preventing bullying also goes beyond hanging rules on a classroom wall. The real goal should be to undermine bullying by fostering compassion in…
Five Faces of Cognition: Theoretical Influences on Approaches to Learning Disabilities.
ERIC Educational Resources Information Center
Hresko, Wayne P.; Reid, D. Kim
1988-01-01
The article points out that the label "cognitive" has been used to designate five substantially different approaches to learning disabilities: information processing, metacognition, genetic epistemology, cognitive behavior modification, and the specific-abilities model. Despite the similar label, the instructional interventions of these approaches…
NASA Technical Reports Server (NTRS)
Donner, Kimberly A.; Holden, Kritina L.; Manahan, Meera K.
1991-01-01
Investigated are five designs of software-based ON/OFF indicators in a hypothetical Space Station Power System monitoring task. The hardware equivalent of the indicators used in the present study is the traditional indicator light that illuminates an ON label or an OFF label. Coding methods used to represent the active state were reverse video, color, frame, check, or reverse video with check. Display background color was also varied. Subjects made judgments concerning the state of indicators that resulted in very low error rates and high percentages of agreement across indicator designs. Response time measures for each of the five indicator designs did not differ significantly, although subjects reported that color was the best communicator. The impact of these results on indicator design is discussed.
Report: EPA’s Voluntary WaterSense Program Demonstrated Success
Report #17-P-0352, August 1, 2017. The EPA estimated that consumers saved over 1.5 trillion gallons of water through use of WaterSense-labeled products. Consumers saved an estimated $1,100 for every federal dollar spent on the program.
Deciphering the V-Chip: An Examination of the Television Industry's Program Rating Judgments.
ERIC Educational Resources Information Center
Kunkel, Dale; Farinola, Wendy Jo Maynard; Farrar, Kirstie; Donnerstein, Edward; Biely, Erica; Zwarun, Lara
2002-01-01
Investigates the validity of the television industry's labeling of sensitive program content following the advent of the V-chip television ratings system. Examines programs for the nature and extent of portrayals of violence, sexual behavior and dialogue, and adult language. Suggests there are substantial limitations in the ability of the V-chip…
Thomson, Lisa M; Vandenberg, Brian; Fitzgerald, John L
2012-03-01
To identify general and specific features of health information warning labels on alcohol beverage containers that could potentially inform the development and implementation of a new labelling regime in Australia. Mixed methods, including a cross-sectional population survey and a qualitative study of knowledge, attitudes and behaviours regarding alcohol beverage labelling. The population survey used computer-assisted telephone interviews of 1500 persons in Victoria, Australia to gauge the level of support for health information and warning labels. The qualitative study used six focus groups to test the suitability of 12 prototype labels that were placed in situ on a variety of alcohol beverage containers. The telephone survey found 80% to 90% support for a range of information that could potentially be mandated by government authorities for inclusion on labels (nutritional information, alcohol content, health warning, images). Focus group testing of the prototype label designs found that labels should be integrated with other alcohol-related health messages, such as government social advertising campaigns, and specific labels should be matched appropriately to specific consumer groups and beverage types. There are high levels of public support for health information and warning labels on alcohol beverages. This study contributes much needed empirical guidance for developing alcohol beverage labelling strategies in an Australian context. © 2011 Australasian Professional Society on Alcohol and other Drugs.
Schilling, Birgit; Rardin, Matthew J; MacLean, Brendan X; Zawadzka, Anna M; Frewen, Barbara E; Cusack, Michael P; Sorensen, Dylan J; Bereman, Michael S; Jing, Enxuan; Wu, Christine C; Verdin, Eric; Kahn, C Ronald; Maccoss, Michael J; Gibson, Bradford W
2012-05-01
Despite advances in metabolic and postmetabolic labeling methods for quantitative proteomics, there remains a need for improved label-free approaches. This need is particularly pressing for workflows that incorporate affinity enrichment at the peptide level, where isobaric chemical labels such as isobaric tags for relative and absolute quantitation and tandem mass tags may prove problematic or where stable isotope labeling with amino acids in cell culture labeling cannot be readily applied. Skyline is a freely available, open source software tool for quantitative data processing and proteomic analysis. We expanded the capabilities of Skyline to process ion intensity chromatograms of peptide analytes from full scan mass spectral data (MS1) acquired during HPLC MS/MS proteomic experiments. Moreover, unlike existing programs, Skyline MS1 filtering can be used with mass spectrometers from four major vendors, which allows results to be compared directly across laboratories. The new quantitative and graphical tools now available in Skyline specifically support interrogation of multiple acquisitions for MS1 filtering, including visual inspection of peak picking and both automated and manual integration, key features often lacking in existing software. In addition, Skyline MS1 filtering displays retention time indicators from underlying MS/MS data contained within the spectral library to ensure proper peak selection. The modular structure of Skyline also provides well defined, customizable data reports and thus allows users to directly connect to existing statistical programs for post hoc data analysis. To demonstrate the utility of the MS1 filtering approach, we have carried out experiments on several MS platforms and have specifically examined the performance of this method to quantify two important post-translational modifications: acetylation and phosphorylation, in peptide-centric affinity workflows of increasing complexity using mouse and human models.
Schilling, Birgit; Rardin, Matthew J.; MacLean, Brendan X.; Zawadzka, Anna M.; Frewen, Barbara E.; Cusack, Michael P.; Sorensen, Dylan J.; Bereman, Michael S.; Jing, Enxuan; Wu, Christine C.; Verdin, Eric; Kahn, C. Ronald; MacCoss, Michael J.; Gibson, Bradford W.
2012-01-01
Despite advances in metabolic and postmetabolic labeling methods for quantitative proteomics, there remains a need for improved label-free approaches. This need is particularly pressing for workflows that incorporate affinity enrichment at the peptide level, where isobaric chemical labels such as isobaric tags for relative and absolute quantitation and tandem mass tags may prove problematic or where stable isotope labeling with amino acids in cell culture labeling cannot be readily applied. Skyline is a freely available, open source software tool for quantitative data processing and proteomic analysis. We expanded the capabilities of Skyline to process ion intensity chromatograms of peptide analytes from full scan mass spectral data (MS1) acquired during HPLC MS/MS proteomic experiments. Moreover, unlike existing programs, Skyline MS1 filtering can be used with mass spectrometers from four major vendors, which allows results to be compared directly across laboratories. The new quantitative and graphical tools now available in Skyline specifically support interrogation of multiple acquisitions for MS1 filtering, including visual inspection of peak picking and both automated and manual integration, key features often lacking in existing software. In addition, Skyline MS1 filtering displays retention time indicators from underlying MS/MS data contained within the spectral library to ensure proper peak selection. The modular structure of Skyline also provides well defined, customizable data reports and thus allows users to directly connect to existing statistical programs for post hoc data analysis. To demonstrate the utility of the MS1 filtering approach, we have carried out experiments on several MS platforms and have specifically examined the performance of this method to quantify two important post-translational modifications: acetylation and phosphorylation, in peptide-centric affinity workflows of increasing complexity using mouse and human models. PMID:22454539
Ciprofloxacin Use in Hospitalized Children: Approved or Off-label?
Faghihi, Toktam; Tekmehdash, Leila Yavari; Radfar, Mania; Gholami, Kheirollah
2017-01-01
Fluoroquinolones are not routinely used as the first-line antimicrobial therapy in pediatrics. The American Academy of Pediatrics (AAP) and the United States Food and Drug Administration (FDA) approved fluoroquinolones on certain indications in children. The aim of this study was to evaluate to what extent and how ciprofloxacin is used on approved indication or as off-label. Besides, dose adequacy and treatment duration were assessed. In a 10-month observational study, all children receiving systemic ciprofloxacin were assessed. We classified ciprofloxacin prescription to an AAP/FDA or off-label indication. The off-label prescriptions were further categorized to justified and unjustified therapy subgroups. The AAP/FDA category and the justified subgroup constituted the appropriate prescriptions. During the study period, 32 patients were prescribed ciprofloxacin. In general, 37% (12) of prescriptions determined to be appropriate. Of the appropriate prescriptions, 7 were AAP/FDA-approved indications. Children with Crohn's disease with abdominal abscess and children with infectious bloody diarrhea constituted the off-label; justified therapy subgroup. Unjustified prescriptions mainly occurred in the presence of a suitable alternative antibiotic for ciprofloxacin. Mean ± SD of ciprofloxacin dose (mg/kg/day) and duration (days) were 21.25 ± 6.35 and 13.56 ± 8.48, respectively. Of the appropriate prescriptions, 41% were underdosed. Underdosing was more encountered in patients with cystic fibrosis. Duration of treatment of the appropriate prescriptions was determined to be appropriate. The majority of children were receiving ciprofloxacin off-label and in an inappropriate manner. This issue emphasizes that antimicrobial stewardship program on ciprofloxacin use in pediatric hospitals should be implemented. Further studies evaluating clinical and microbiological outcomes of these programs in children are needed.
Han, Kyu-Tae; Kim, Seung Ju; Kim, Dong Jun; Kim, Sun Jung
2018-05-29
In 1995, nutrition labeling became mandatory in South Korea. These regulations help consumers make reasonable choices when purchasing food based on nutritional value by providing the nutritional properties of processed foods. We investigated the association between perceptions about nutrition labeling and insulin resistance (IR) in people with no diagnosis of diabetes mellitus (DM). This study used data from the sixth Korea National Health and Nutrition Examination Survey (KNHANES VI-3 in 2015, n=2931). We used multiple regression analysis to investigate the relationship between perceptions about nutrition labeling and the homeostatic model assessment for insulin resistance (HOMA-IR). 75.2% of participants were aware of nutrition labeling and 24.8% of participants checked nutrition labeling and actively used the information. "Actively checked and used the nutrition labeling" was inversely associated with HOMA-IR scores (check nutrition facts and make labeling-dependent purchase decisions: β=-0.108, p=0.0164). These associations were more significant in people who were obese or paid more attention to their health. High levels of perceptions about nutrition labeling and active use of such information could have positive effects on reducing IR and preventing DM. Therefore, it is necessary to improve public perception for effective implementation of healthcare programs. Copyright © 2018 Primary Care Diabetes Europe. Published by Elsevier Ltd. All rights reserved.
Callé, N; Plainfossé, C; Georget, P; Sénémeaud, C; Rasonglès, P
2011-12-01
The supply of blood cell products requires from the National French Blood Institute (Établissement Français du Sang - EFS) to rely upon regular blood donors. Contact with donors, tailored to individuals as much as possible, helps them to donate on a regular basis. Within the context of a research program conducted with the Psychology Department of the Université de Caen Basse-Normandie, persuasive theoretical models from social psychology have been tested. These models allow adapting messages according to the motivation of donors. The content is centred on the previous donation, differently labelled according to two types of labelling: functional labelling and social labelling. Functional labelling points out the efficiency of what "has been done" (the previous blood donation), whereas social labelling emphasizes the social value of the individual. Different types of mailing invitations have been sent to 1917 donors from the Normandy database, invited to three different blood collections. Every experimental letter worked better than the standard EFS letter (which was used as the "control" letter) in terms of effective blood donation after reception of the letter. Some of the letters are more efficient in motivating donors than other ones. The letters labelling the previous blood donation as functional (efficiency of the donation) appeared more efficient than those with social label (social value) in whichever motivation induced. Copyright © 2011 Elsevier Masson SAS. All rights reserved.
An Overview of Advanced SILAC-Labeling Strategies for Quantitative Proteomics.
Terzi, F; Cambridge, S
2017-01-01
Comparative, quantitative mass spectrometry of proteins provides great insight to protein abundance and function, but some molecular characteristics related to protein dynamics are not so easily obtained. Because the metabolic incorporation of stable amino acid isotopes allows the extraction of distinct temporal and spatial aspects of protein dynamics, the SILAC methodology is uniquely suited to be adapted for advanced labeling strategies. New SILAC strategies have emerged that allow deeper foraging into the complexity of cellular proteomes. Here, we review a few advanced SILAC-labeling strategies that have been published during last the years. Among them, different subsaturating-labeling as well as dual-labeling schemes are most prominent for a range of analyses including those of neuronal proteomes, secretion, or cell-cell-induced stimulations. These recent developments suggest that much more information can be gained from proteomic analyses if the labeling strategies are specifically tailored toward the experimental design. © 2017 Elsevier Inc. All rights reserved.
The origin of mesoderm in phoronids
NASA Technical Reports Server (NTRS)
Freeman, Gary; Martindale, Mark Q.
2002-01-01
Descriptive studies of phoronid development have concluded that the mesoderm of these animals originates from the endoderm during gastrulation. This interpretation has been tested by labeling one blastomere of 4- through 16-cell embryos and examining the position and germ layers occupied by the labeled clones of cells in the larva. No 2 injections gave rise to identical clones of cells, suggesting that the cleavage program does not generate cells of unique identity and that cell fates are established at later developmental time points. In many cases, a relatively large sector composed of ectodermal cells was labeled. When these labeled cells were adjacent to the mouth or anus of the larva, muscle and mesenchyme cells originated from the labeled clones. Under these circumstances, nerve cells also originated from these labeled sectors. These labeling studies also showed that endodermal cells can give rise to mesodermal and neural cells. These results suggest that nerve and muscle cells are induced to form at ectodermal-endodermal boundaries from both germ layers. These marking experiments also confirmed the observation that nerve cells originate both from the apical organ and the trunk region and show for the first time that the intestine originates by ingression of posterior ectoderm.
A rapid and fluorogenic TMP-AcBOPDIPY probe for covalent labeling of proteins in live cells.
Liu, Wei; Li, Fu; Chen, Xi; Hou, Jian; Yi, Long; Wu, Yao-Wen
2014-03-26
Protein labeling is enormously useful for characterizing protein function in cells and organisms. Chemical tagging methods have emerged as a new generation protein labeling strategy in live cells. Here we have developed a novel and versatile TMP-AcBOPDIPY probe for selective and turn-on labeling of proteins in live cells. A small monomeric tag, E. coli dihydrofolate reductase (eDHFR), was rationally designed to introduce a cysteine in the vicinity of the ligand binding site. Trimethoprim (TMP) that specifically binds to eDHFR was linked to the BOPDIPY fluorophore containing a mildly thiol-reactive acrylamide group. TMP-AcBOPDIPY rapidly labeled engineered eDHFR tags via a reaction termed affinity conjugation (a half-life of ca. 2 min), which is one of the top fast chemical probes for protein labeling. The probe displays 2-fold fluorescence enhancement upon labeling of proteins. We showed that the probe specifically labeled intracellular proteins in live cells without and with washing out the dye. We demonstrated its utility in visualizing intracellular processes by fluorescence-lifetime imaging microscopy (FLIM) measurements.
Ebneter, Daria S; Latner, Janet D; Nigg, Claudio R
2013-09-01
The present study examined whether low-fat labeling and caloric information affect food intake, calorie estimates, taste preference, and health perceptions. Participants included 175 female undergraduate students who were randomly assigned to one of four experimental conditions. A 2×2 between subjects factorial design was used in which the fat content label and caloric information of chocolate candy was manipulated. The differences in food intake across conditions did not reach statistical significance. However, participants significantly underestimated the calorie content of low-fat-labeled candy. Participants also rated low-fat-labeled candy as significantly better tasting when they had caloric information available. Participants endorsed more positive health attributions for low-fat-labeled candy than for regular-labeled candy, independent of caloric information. The inclusion of eating attitudes and behaviors as covariates did not alter the results. The study findings may be related to the "health halo" associated with low-fat foods and add to the research base by examining the interaction between low-fat and calorie labeling. Copyright © 2013 Elsevier Ltd. All rights reserved.
Consumers' perception of organic product characteristics. A review.
Schleenbecker, Rosa; Hamm, Ulrich
2013-12-01
Consumer interest in organic products is growing alongside a diversification of the supply. In order to serve consumers actual needs and wants regarding organic products, those involved in the market need to be informed about consumers' perception of organic products. Therefore, the state of research as regards consumers' perception of organic product characteristics, including basic and additional characteristics, product labelling, product innovations and the range of products on the market is displayed in this contribution. A comprehensive literature analysis was performed uncovering not only the state of the art in the field including employed methodology, but also research needs. Most studies are published on consumers' perception of organic products' design and labelling. A trend towards the so called 'organic-plus' positioning can be perceived, with many consumers expecting an extensive orientation towards sustainability. The diversity of product labels features prominently in related studies. The demand for reliable information, as well as the low degree of awareness of many labels amongst consumers becomes clear in these studies. To date, few results are available on consumers' perception of packaging and design of organic products, and even fewer for consumers' perception of range design. Both consumers' perception of organic product innovation and valued added services are untouched so far. Copyright © 2013 Elsevier Ltd. All rights reserved.
16 CFR 305.12 - Labeling for central air conditioners, heat pumps, and furnaces.
Code of Federal Regulations, 2010 CFR
2010-01-01
... pumps, and furnaces. (a) Layout. All energy labels for central air conditioners, heat pumps, and... the end of this part illustrating the basic layout. All positioning, spacing, type sizes, and line... calculated for heating Region IV for the standardized design heating requirement nearest the capacity...
16 CFR 305.12 - Labeling for central air conditioners, heat pumps, and furnaces.
Code of Federal Regulations, 2011 CFR
2011-01-01
... pumps, and furnaces. (a) Layout. All energy labels for central air conditioners, heat pumps, and... the end of this part illustrating the basic layout. All positioning, spacing, type sizes, and line... calculated for heating Region IV for the standardized design heating requirement nearest the capacity...
16 CFR 305.12 - Labeling for central air conditioners, heat pumps, and furnaces.
Code of Federal Regulations, 2013 CFR
2013-01-01
... pumps, and furnaces. (a) Layout. All energy labels for central air conditioners, heat pumps, and... end of this part illustrating the basic layout. All positioning, spacing, type sizes, and line widths... calculated for heating Region IV for the standardized design heating requirement nearest the capacity...
16 CFR 305.12 - Labeling for central air conditioners, heat pumps, and furnaces.
Code of Federal Regulations, 2012 CFR
2012-01-01
... pumps, and furnaces. (a) Layout. All energy labels for central air conditioners, heat pumps, and... the end of this part illustrating the basic layout. All positioning, spacing, type sizes, and line... calculated for heating Region IV for the standardized design heating requirement nearest the capacity...
Mathematical Methods of Communication Signal Design
1990-09-30
Labelling of Annals of Discrete Math ., 1989-90. iv. T. Etzion, S.W. Golomb, and H. Taylor, "Polygonal Path Constructions for Tuscan-k Squares...the Special Issue on Graph Labellings of A,.nals of Discrete Math ., 1989-1990. vi. T. Etzion, "An Algorithm for Realization of Permutations in a
46 CFR 161.013-13 - Manufacturer certification and labeling.
Code of Federal Regulations, 2011 CFR
2011-10-01
...) Manufacturer's name; (2) Replacement battery type; (3) Lamp size; and (4) The following words— “Night Visual... Only.” (c) If an electric light is designed for use with dry cell batteries the label must advise the consumer on the battery replacement schedule which under normal conditions would maintain performance...
46 CFR 161.013-13 - Manufacturer certification and labeling.
Code of Federal Regulations, 2014 CFR
2014-10-01
...) Manufacturer's name; (2) Replacement battery type; (3) Lamp size; and (4) The following words— “Night Visual... Only.” (c) If an electric light is designed for use with dry cell batteries the label must advise the consumer on the battery replacement schedule which under normal conditions would maintain performance...
46 CFR 161.013-13 - Manufacturer certification and labeling.
Code of Federal Regulations, 2010 CFR
2010-10-01
...) Manufacturer's name; (2) Replacement battery type; (3) Lamp size; and (4) The following words— “Night Visual... Only.” (c) If an electric light is designed for use with dry cell batteries the label must advise the consumer on the battery replacement schedule which under normal conditions would maintain performance...
46 CFR 161.013-13 - Manufacturer certification and labeling.
Code of Federal Regulations, 2012 CFR
2012-10-01
...) Manufacturer's name; (2) Replacement battery type; (3) Lamp size; and (4) The following words— “Night Visual... Only.” (c) If an electric light is designed for use with dry cell batteries the label must advise the consumer on the battery replacement schedule which under normal conditions would maintain performance...
46 CFR 161.013-13 - Manufacturer certification and labeling.
Code of Federal Regulations, 2013 CFR
2013-10-01
...) Manufacturer's name; (2) Replacement battery type; (3) Lamp size; and (4) The following words— “Night Visual... Only.” (c) If an electric light is designed for use with dry cell batteries the label must advise the consumer on the battery replacement schedule which under normal conditions would maintain performance...
Roseman, Mary G; Joung, Hyun-Woo; Littlejohn, Emily I
2018-05-01
Front-of-package (FOP) labels are increasing in popularity on retail products. Reductive FOP labels provide nutrient-specific information, whereas evaluative FOP labels summarize nutrient information through icons. Better understanding of consumer behavior regarding FOP labels is beneficial to increasing consumer use of nutrition labeling when making grocery purchasing decisions. We aimed to determine FOP label format effectiveness in aiding consumers at assessing nutrient density of food products. In addition, we sought to determine relationships between FOP label use and attitude toward healthy eating, diet self-assessment, self-reported health and nutrition knowledge, and label and shopping behaviors. A between-subjects experimental design was employed. Participants were randomly assigned to one of four label conditions: Facts Up Front, Facts Up Front Extended, a binary symbol, and no-label control. One hundred sixty-one US primary grocery shoppers, aged 18 to 69 years. Participants were randomly invited to the online study. Participants in one of four label condition groups viewed three product categories (cereal, dairy, and snacks) with corresponding questions. Adults' nutrition assessment of food products based on different FOP label formats, along with label use and attitude toward healthy eating, diet self-assessment, self-reported health and nutrition knowledge, and label and shopping behaviors. Data analyses included descriptive statistics, χ 2 tests, and logistical regression. Significant outcomes were set to α=.05. Participants selected the more nutrient-dense product in the snack food category when it contained an FOP label. Subjective health and nutrition knowledge and frequency of selecting food for healthful reasons were associated with FOP label use (P<0.01 and P<0.05, respectively). Both Facts Up Front (reductive) and binary (evaluative) FOP labels appear effective for nutrition assessment of snack products compared with no label. Specific attitude and behavior factors were associated with label use. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.
Probes labelled with energy transfer coupled dyes
Mathies, R.A.; Glazer, A.; Ju, J.
1997-11-18
Compositions are provided comprising sets of fluorescent labels carrying pairs of donor and acceptor dye molecules, designed for efficient excitation of the donors at a single wavelength and emission from the acceptor in each of the pairs at different wavelengths. The different molecules having different donor-acceptor pairs can be modified to have substantially the same mobility under separation conditions, by varying the distance between the donor and acceptor in a given pair. Particularly, the fluorescent compositions find use as labels in sequencing nucleic acids. 7 figs.
Lai, Ying-Chih; Hsu, Fang-Chi; Chen, Jian-Yu; He, Jr-Hau; Chang, Ting-Chang; Hsieh, Ya-Ping; Lin, Tai-Yuan; Yang, Ying-Jay; Chen, Yang-Fang
2013-05-21
A newly designed transferable and flexible label-like organic memory based on a graphene electrode behaves like a sticker, and can be readily placed on desired substrates or devices for diversified purposes. The memory label reveals excellent performance despite its physical presentation. This may greatly extend the memory applications in various advanced electronics and provide a simple scheme to integrate with other electronics. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Fluorescent labels and their use in separations
Mathies, Richard A.; Glazer, Alexander; Ju, Jingyue
1997-01-01
Compositions are provided comprising sets of fluorescent labels carrying pairs of donor and acceptor dye molecules, designed for efficient excitation of the donors at a single wavelength and emission from the acceptor in each of the pairs at different wavelengths. The different molecules having different donor-acceptor pairs can be modified to have substantially the same mobility under separation conditions, by varying the distance between the donor and acceptor in a given pair. Particularly, the fluorescent compositions find use as labels in sequencing nucleic acids.
Probes labelled with energy transfer coupled dyes
Mathies, Richard A.; Glazer, Alexander; Ju, Jingyue
1997-01-01
Compositions are provided comprising sets of fluorescent labels carrying pairs of donor and acceptor dye molecules, designed for efficient excitation of the donors at a single wavelength and emission from the acceptor in each of the pairs at different wavelengths. The different molecules having different donor-acceptor pairs can be modified to have substantially the same mobility under separation conditions, by varying the distance between the donor and acceptor in a given pair. Particularly, the fluorescent compositions find use as labels in sequencing nucleic acids.
Targeting adolescent risk-taking behaviors: the contributions of egocentrism and sensation-seeking.
Greene, K; Krcmar, M; Walters, L H; Rubin, D L; Jerold; Hale, L
2000-08-01
Tremendous resources are spent each year developing programs and messages targeting adolescent risk behavior. Adolescents are often reasonably well educated about methods for health promotion such as preventing HIV infection, yet they fail to act accordingly. One widely used individual difference variable, sensation-seeking, has been incorporated in health message design to some extent, but it fails to take development into account. Research on adolescent egocentrism suggests adolescents experience personal fable which can lead to an exaggerated sense of invulnerability. The present study sampled adolescents and college students to examine relative contributions of egocentrism and sensation-seeking to risk-taking behavior. Results indicate a latent factor labeled risk-seeking (primarily indicated by disinhibition and risk-taking personality, and to a lesser degree by invulnerability, experience-seeking, boredom susceptibility, and thrill and adventure-seeking) indeed predicted a latent factor labeled delinquent behavior (primarily indicated by alcohol consumption and delinquency, and to a lesser degree by drug use, drinking and driving, and risky driving). Other results indicate consistently high personal fable combined with high sensation-seeking explained most risk-taking behavior. Implications and directions for future research are discussed. Copyright 2000 The Association for Professionals in Services for Adolescents.
COMPASS: a suite of pre- and post-search proteomics software tools for OMSSA
Wenger, Craig D.; Phanstiel, Douglas H.; Lee, M. Violet; Bailey, Derek J.; Coon, Joshua J.
2011-01-01
Here we present the Coon OMSSA Proteomic Analysis Software Suite (COMPASS): a free and open-source software pipeline for high-throughput analysis of proteomics data, designed around the Open Mass Spectrometry Search Algorithm. We detail a synergistic set of tools for protein database generation, spectral reduction, peptide false discovery rate analysis, peptide quantitation via isobaric labeling, protein parsimony and protein false discovery rate analysis, and protein quantitation. We strive for maximum ease of use, utilizing graphical user interfaces and working with data files in the original instrument vendor format. Results are stored in plain text comma-separated values files, which are easy to view and manipulate with a text editor or spreadsheet program. We illustrate the operation and efficacy of COMPASS through the use of two LC–MS/MS datasets. The first is a dataset of a highly annotated mixture of standard proteins and manually validated contaminants that exhibits the identification workflow. The second is a dataset of yeast peptides, labeled with isobaric stable isotope tags and mixed in known ratios, to demonstrate the quantitative workflow. For these two datasets, COMPASS performs equivalently or better than the current de facto standard, the Trans-Proteomic Pipeline. PMID:21298793
International Experience in Standards and Labeling Programs for Rice Cookers
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou, Nan; Zheng, Nina
China has had an active program on energy efficiency standards for household appliances since the mid-1990s. Rice cooker is among the first to be subject to such mandatory regulation, since it is one of the most prevalent electric appliances in Chinese households. Since first introduced in 1989, the minimum energy efficiency standard for rice cookers has not been revised. Therefore, the potential for energy saving is considerable. Initial analysis from CNIS indicates that potential carbon savings is likely to reach 7.6 million tons of CO2 by the 10th year of the standard implementation. Since September 2007, CNIS has been workingmore » with various groups to develop the new standard for rice cookers. With The Energy Foundation's support, LBNL has assisted CNIS in the revision of the minimum energy efficiency standard for rice cookers that is expected to be effective in 2009. Specifically, work has been in the following areas: assistance in developing consumer survey on usage pattern of rice cookers, review of international standards, review of international test procedures, comparison of the international standards and test procedures, and assessment of technical options of reducing energy use. This report particularly summarizes the findings of reviewing international standards and technical options of reducing energy consumption. The report consists of an overview of rice cooker standards and labeling programs and testing procedures in Hong Kong, South Korea, Japan and Thailand, and Japan's case study in developing energy efficiency rice cooker technologies and rice cooker efficiency programs. The results from the analysis can be summarized as the follows: Hong Kong has a Voluntary Energy Efficiency Labeling scheme for electric rice cookers initiated in 2001, with revision implemented in 2007; South Korea has both MEPS and Mandatory Energy Efficiency Label targeting the same category of rice cookers as Hong Kong; Thailand's voluntary endorsement labeling program is similar to Hong Kong in program design but has 5 efficiency grades; Japan's program is distinct in its adoption of the 'Top Runner' approach, in which, the future efficiency standards is set based on the efficiency levels of the most efficient product in the current domestic market. Although the standards are voluntary, penalties can still be evoked if the average efficiency target is not met. Both Hong Kong and South Korea's tests involve pouring water into the inner pot equal to 80% of its rated volume; however, white rice is used as a load for its tests in Hong Kong whereas no rice is used for tests in South Korea. In Japan's case, water level specified by the manufactures is used and milled rice is used as a load only partially in the tests. Moreover, Japan does not conduct heat efficiency test but its energy consumption measurements tests are much more complex, with 4 different tests are conducted to determine the annual average energy consumption. Hong Kong and Thailand both set Minimum Allowable Heat Efficiency for different rated wattages. The energy efficiency requirements are identical except that the minimum heat efficiency in Thailand is 1 percentage point higher for all rated power categories. In South Korea, MEPS and label's energy efficiency grades are determined by the rice cooker's Rated Energy Efficiency for induction, non-induction, pressure, nonpressure rice cookers. Japan's target standard values are set for electromagnetic induction heating products and non-electromagnetic induction heating products by different size of rice cookers. Specific formulas are used by type and size depending on the mass of water evaporation of the rice cookers. Japan has been the leading country in technology development of various types of rice cookers, and developed concrete energy efficiency standards for rice cookers. However, as consumers in Japan emphasize the deliciousness of cooked rice over other factors, many types of models were developed to improve the taste of cooked rice. Nonetheless, the efficiency of electromagnetic induction heating (IH) rice cookers in warm mode has improved approximately 12 percent from 1993 to 2004 due to the 'low temperature warming method' developed by manufacturers. The Energy Conservation Center of Japan (IEEJ) releases energy saving products database on the web regularly, on which the energy saving performance of each product is listed and ranked. Energy saving in rice cookers mostly rest with insulation of the pot. Technology developed to improve the energy efficiency of the rice cookers includes providing vacuum layers on both side of the pot, using copper-plated materials, and double stainless layer lid that can be heated and steam can run in between the two layers to speed the heating process.« less
Assessment of the Impacts of Standards and Labeling Programs inMexico (four products).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sanchez, Itha; Pulido, Henry; McNeil, Michael A.
2007-06-12
This study analyzes impacts from energy efficiency standards and labeling in Mexico from 1994 through 2005 for four major products: household refrigerators, room air conditioners, three-phase (squirrel cage) induction motors, and clothes washers. It is a retrospective analysis, seeking to assess verified impacts on product efficiency in the Mexican market in the first ten years after standards were implemented. Such an analysis allows the Mexican government to compare actual to originally forecast program benefits. In addition, it provides an extremely valuable benchmark for other countries considering standards, and to the energy policy community as a whole. The methodology for evaluationmore » begins with historical test data taken for a large number of models of each product type between 1994 and 2005. The pre-standard efficiency of models in 1994 is taken as a baseline throughout the analysis. Model efficiency data were provided by an independent certification laboratory (ANCE), which tested products as part of the certification and enforcement mechanism defined by the standards program. Using this data, together with economic and market data provided by both government and private sector sources, the analysis considers several types of national level program impacts. These include: Energy savings; Environmental (emissions) impacts, and Net financial impacts to consumers, manufacturers and utilities. Energy savings impacts are calculated using the same methodology as the original projections, allowing a comparison. Other impacts are calculated using a robust and sophisticated methodology developed by the Instituto de Investigaciones Electricas (IIE) and Lawrence Berkeley National Laboratory (LBNL), in a collaboration supported by the Collaborative Labeling and Standards Program (CLASP).« less
Shiyanbola, Olayinka O; Smith, Paul D; Huang, Yen-Ming; Mansukhani, Sonal Ghura
2017-02-01
Background Recommendations call for the inclusion of both patient and provider input in the redesign of prescription labels. Pharmacist opinions on prescription warning labels are important because they are the health providers who would eventually distribute and explain the revised labels during medication counseling. They may be the first health provider to notice a patient's misunderstanding on how to safely use their prescription medications. Objectives To explore the perspectives of patients and pharmacists on five newly designed PWLs, and examine if there were similarities and differences between patients' and pharmacists' perspectives. Setting Private room in Wisconsin. Methods A descriptive study using semi-structured 60-min face-to-face individual interviews with patients and pharmacists explored patients and pharmacists' feedback on five newly designed PWLs. Patients who were 18 years and older, spoke English, and took a prescription medication and pharmacists who filled prescriptions in an ambulatory setting participated in the study. The patient and pharmacist perspectives on the words (content), picture and color (cosmetic appearance), and placement of warning instructions on the pill bottle (convenience) was based on a label redesign framework. Qualitative content analysis was done. Main outcome measure Patient and pharmacist perspectives on the newly designed PWLs. Results Twenty-one patients and eight pharmacists practicing in an academic medical center outpatient setting (n = 5) or retail pharmacy (n = 3) participated. All patients and pharmacists wanted the PWLs positioned on the front of the pill bottle but not the side of the bottle or warning instructions embedded into the main prescription label. Other similarities included participants preferring: (1) pictures closely depicting the instructions and (2) the use of yellow highlighting on the PWL to draw attention to it. There were differences in patient and pharmacist perspectives regarding the addition of 'Warning' to the instruction on the PWL with the patient preference to include the word 'Warning'. Pharmacists thought some PWL pictures had racial stereotypes, but this feedback was never mentioned by patients. Conclusions Patients and pharmacists had different preferences for PWL design changes to improve understandability. Pharmacist preferences did not always correspond with patient preferences. However, patients and pharmacists generally agreed on the preferred location of the PWL on the pill bottle and the use of color for drawing patients' attention.
Dawood, Omar T; Hassali, Mohamed A; Saleem, Fahad; Ibrahim, Inas R
2018-04-01
This study was undertaken to assess the people's self-reported reading of medicine labels and its associated factors and to assess the sources of information about medicines among general public. A cross-sectional study was carried out among general public in the State of Penang, Malaysia. A total of 888 participants were conveniently selected and completed the survey. A self-administered questionnaire was used to obtain the data from all the participants. Most of the participants (74.2%) reported that they have adequate information about medicines provided on their medicine labels. In addition, 86.9% of them reported that they read their medicine's label for the directions of usage and 84.3% for the dosage instruction. However, 42.1% of the participants do not read their medicine's label for the active ingredients, and 33% of them do not read their medicine's label for the safety information. In addition, 36.5% of the respondents did not read the label of medicine for the symptoms which can be used for. However, females, Malay respondents, and higher education level (college/university) were more likely to self-reported the reading medicine's label. Females were more likely to read the labels of medicines compared with males (OR = 1.6, 95% CI 1.20-2.13, P = .001). The reading of medicine labels was predicted by females, Malay respondents, and higher educated people. Health educational programs are needed to clarify label's information that can help in concept of patient safety.
Comparison of international food allergen labeling regulations.
Gendel, Steven M
2012-07-01
Food allergy is a significant public health issue worldwide. Regulatory risk management strategies for allergic consumers have focused on providing information about the presence of food allergens through label declarations. A number of countries and regulatory bodies have recognized the importance of providing this information by enacting laws, regulations or standards for food allergen labeling of "priority allergens". However, different governments and organizations have taken different approaches to identifying these "priority allergens" and to designing labeling declaration regulatory frameworks. The increasing volume of the international food trade suggests that there would be value in supporting sensitive consumers by harmonizing (to the extent possible) these regulatory frameworks. As a first step toward this goal, an inventory of allergen labeling regulations was assembled and analyzed to identify commonalities, differences, and future needs. Published by Elsevier Inc.