Green buildings need good ergonomics.

PubMed

Hedge, A; Dorsey, J A

2013-01-01

A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

Ergonomics for enhancing detection of machine abnormalities.

PubMed

Illankoon, Prasanna; Abeysekera, John; Singh, Sarbjeet

2016-10-17

Detecting abnormal machine conditions is of great importance in an autonomous maintenance environment. Ergonomic aspects can be invaluable when detection of machine abnormalities using human senses is examined. This research outlines the ergonomic issues involved in detecting machine abnormalities and suggests how ergonomics would improve such detections. Cognitive Task Analysis was performed in a plant in Sri Lanka where Total Productive Maintenance is being implemented to identify sensory types that would be used to detect machine abnormalities and relevant Ergonomic characteristics. As the outcome of this research, a methodology comprising of an Ergonomic Gap Analysis Matrix for machine abnormality detection is presented.

Ergonomics in radiology.

PubMed

Goyal, N; Jain, N; Rachapalli, V

2009-02-01

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations.

Design and ergonomics. Methods for integrating ergonomics at hand tool design stage.

PubMed

Marsot, Jacques; Claudon, Laurent

2004-01-01

As a marked increase in the number of musculoskeletal disorders was noted in many industrialized countries and more specifically in companies that require the use of hand tools, the French National Research and Safety Institute (INRS) launched in 1999 a research project on the topic of integrating ergonomics into hand tool design, and more particularly to a design of a boning knife. After a brief recall of the difficulties of integrating ergonomics at the design stage, the present paper shows how 3 design methodological tools--Functional Analysis, Quality Function Deployment and TRIZ--have been applied to the design of a boning knife. Implementation of these tools enabled us to demonstrate the extent to which they are capable of responding to the difficulties of integrating ergonomics into product design.

Vibration reduction of pneumatic percussive rivet tools: mechanical and ergonomic re-design approaches.

PubMed

Cherng, John G; Eksioglu, Mahmut; Kizilaslan, Kemal

2009-03-01

This paper presents a systematic design approach, which is the result of years of research effort, to ergonomic re-design of rivet tools, i.e. rivet hammers and bucking bars. The investigation was carried out using both ergonomic approach and mechanical analysis of the rivet tools dynamic behavior. The optimal mechanical design parameters of the re-designed rivet tools were determined by Taguchi method. Two ergonomically re-designed rivet tools with vibration damping/isolation mechanisms were tested against two conventional rivet tools in both laboratory and field tests. Vibration characteristics of both types of tools were measured by laboratory tests using a custom-made test fixture. The subjective field evaluations of the tools were performed by six experienced riveters at an aircraft repair shop. Results indicate that the isolation spring and polymer damper are very effective in reducing the overall level of vibration under both unweighted and weighted acceleration conditions. The mass of the dolly head and the housing played a significant role in the vibration absorption of the bucking bars. Another important result was that the duct iron has better vibration reducing capability compared to steel and aluminum for bucking bars. Mathematical simulation results were also consistent with the experimental results. Overall conclusion obtained from the study was that by applying the design principles of ergonomics and by adding vibration damping/isolation mechanisms to the rivet tools, the vibration level can significantly be reduced and the tools become safer and user friendly. The details of the experience learned, design modifications, test methods, mathematical models and the results are included in the paper.

The Impact of Ergonomically Designed Workstations on Shoulder EMG Activity during Carpet Weaving

PubMed Central

Motamedzade, Majid; Afshari, Davood; Soltanian, Alireza

2014-01-01

Background: The present study aimed to evaluate the biomechanical exposure to the trapezius muscle activity in female weavers for a prolonged period in the workstation A (suggested by previous studies) and workstation B (proposed by the present study). Methods: Electromyography data were collected from nine females during four hours for each ergonomically designed workstation at the Ergonomics Laboratory, Hamadan, Iran. The design criteria for ergonomically designed workstations were: 1) weaving height (20 and 3 cm above elbow height for workstations A and B, respectively), and 2) seat type (10° and 0° forwardsloping seat for workstations A and B, respectively). Results: The amplitude probability distribution function (APDF) analysis showed that the left and right upper trapezius muscle activity was almost similar at each workstation. Trapezius muscle activity in the workstation A was signifi­cantly greater than workstations B (P<0.001). Conclusion: In general, use of workstation B leads to significantly reduced muscle activity levels in the upper trapezius as compared to workstation A in weavers. Despite the positive impact of workstation B in reducing trapezius muscle activity, it seems that constrained postures of the upper arm during weaving may be associated with musculoskeletal symptoms. PMID:25650180

The Impact of Ergonomically Designed Workstations on Shoulder EMG Activity during Carpet Weaving.

PubMed

Motamedzade, Majid; Afshari, Davood; Soltanian, Alireza

2014-01-01

The present study aimed to evaluate the biomechanical exposure to the trapezius muscle activity in female weavers for a prolonged period in the workstation A (suggested by previous studies) and workstation B (proposed by the present study). Electromyography data were collected from nine females during four hours for each ergonomically designed workstation at the Ergonomics Laboratory, Hamadan, Iran. The design criteria for ergonomically designed workstations were: 1) weaving height (20 and 3 cm above elbow height for workstations A and B, respectively), and 2) seat type (10° and 0° forwardsloping seat for workstations A and B, respectively). The amplitude probability distribution function (APDF) analysis showed that the left and right upper trapezius muscle activity was almost similar at each workstation. Trapezius muscle activity in the workstation A was signifi-cantly greater than workstations B (P<0.001). In general, use of workstation B leads to significantly reduced muscle activity levels in the upper trapezius as compared to workstation A in weavers. Despite the positive impact of workstation B in reducing trapezius muscle activity, it seems that constrained postures of the upper arm during weaving may be associated with musculoskeletal symptoms.

Ergonomics policy in Indonesia.

PubMed

Sutarjo, Untung S

2007-12-01

Workers' conditions in accordance with their place of work are different from one area to another, especially in this reformation era where there are immense alterations in politics shown from the centralized government shifting to decentralization and district autonomy. Ergonomics problems in Indonesia are reviewed. In home industries, workers have to adjust themselves to their jobs, and ergonomic improvement may face significant impediments especially in small-scale industries. It is necessary to create or identify the most plausible model to be implemented in accordance with the conditions of districts, including low awareness about the relation between ergonomics and workers' productivity in producing goods and services and working processes scattered often at their own houses. As conditions conducive to ergonomics programs, district-level willingness to improve and increase the wealth of their society, recognition by businesses about the impacts of ergonomics on productivity and reduction of medical treatment costs may be mentioned. Labor unions support ergonomic improvements at production processes, and professionals and academicians are ready to assist, whereas national banks and foreign investment may encourage new technologies including ergonomics aspects. It is important to strengthen ergonomic improvement efforts in Indonesia through establishing district ergonomics improvement networks and ergonomics peer leaders with the support of continual training starting from the training of core leaders at the province level and extending to peer leaders at district level. This training should be made as simple as possible in order to facilitate innovations toward changes. Finally assistance is needed by the mentor teams in order to periodically monitor the improvements undertaken.

Applying research to practice: generalist and specialist (visual ergonomics) consultancy.

PubMed

Long, Jennifer; Long, Airdrie

2012-01-01

Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants--generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.

The charge of ergonomics--a model according to the influence of ergonomic workplace design for economical and efficient indicators of the automotive industry.

PubMed

Neubert, Nicole; Bruder, Ralph; Toledo, Begoña

2012-01-01

The importance of ergonomic workplace design has been rising incredibly. The knowledge of the interaction with a view to many indicators (e.g. operators' health, quality, productivity etc.) in the automotive assembly shop pushed into another thinking of ergonomics and an increasing awareness of economic possibilities relating to benefits and cost savings aligned with ergonomics. The paper discusses exemplary the various indicators and factors which could be influenced by ergonomic workplace design. These factors are linked each other and support the statement of ergonomic efficiency. Thus, the aim of this paper is to present a model which describes that investments in ergonomic work placement acts with preventive measurements, minimization of losses (refinishing operations, compensation money etc.) and extensive economies on the whole company.

Ergonomics in the operating room: protecting the surgeon.

PubMed

Rosenblatt, Peter L; McKinney, Jessica; Adams, Sonia R

2013-01-01

To review elements of an ergonomic operating room environment and describe common ergonomic errors in surgeon posture during laparoscopic and robotic surgery. Descriptive video based on clinical experience and a review of the literature (Canadian Task Force classification III). Community teaching hospital affiliated with a major teaching hospital. Gynecologic surgeons. Demonstration of surgical ergonomic principles and common errors in surgical ergonomics by a physical therapist and surgeon. The physical nature of surgery necessitates awareness of ergonomic principles. The literature has identified ergonomic awareness to be grossly lacking among practicing surgeons, and video has not been documented as a teaching tool for this population. Taking this into account, we created a video that demonstrates proper positioning of monitors and equipment, and incorrect and correct ergonomic positions during surgery. Also presented are 3 common ergonomic errors in surgeon posture: forward head position, improper shoulder elevation, and pelvic girdle asymmetry. Postural reset and motion strategies are demonstrated to help the surgeon learn techniques to counterbalance the sustained and awkward positions common during surgery that lead to muscle fatigue, pain, and degenerative changes. Correct ergonomics is a learned and practiced behavior. We believe that video is a useful way to facilitate improvement in ergonomic behaviors. We suggest that consideration of operating room setup, proper posture, and practice of postural resets are necessary components for a longer, healthier, and pain-free surgical career. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Green ergonomics: definition and scope.

PubMed

Thatcher, Andrew

2013-01-01

This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

Ergonomics in Dentistry

PubMed Central

Bhat, Manohar; Mohammed, Tahir; Bansal, Nikita; Gupta, Gaurav

2014-01-01

ABSTRACT Ergonomics is much broader than preventing work‑related musculoskeletal disorders. The successful application of ergo‑ nomics assures high productivity, avoidance of illnesses and injuries, and increased satisfaction among workers. Unsuc‑ cessful application, on the other hand, can lead to work‑related musculoskeletal disorders (MSDs). This article sets forth broad important background information on ergonomics so that the dental practitioner can have a general awareness of ergonomic risk factors as well as some basis for understanding the ongo‑ ing dialogue about ergonomics, its diagnosis, treatment, and regulation. This article provides alternatives to be considered by the practitioner in light of the practitioner's own circumstances, experiences and goals. A practitioner wishing to improve his or her work environment, for whatever reason, may wish to follow an incremental approach to such efforts, as is briefy discussed here. How to cite this article: Gupta A, Bhat M, Mohammed T, Bansal N, Gupta G. Ergonomics in Dentistry. Int J Clin Pediatr Dent 2014;7(1):30-34. PMID:25206234

Ergonomics in dentistry.

PubMed

Gupta, Anshul; Bhat, Manohar; Mohammed, Tahir; Bansal, Nikita; Gupta, Gaurav

2014-01-01

Ergonomics is much broader than preventing work‑related musculoskeletal disorders. The successful application of ergo‑ nomics assures high productivity, avoidance of illnesses and injuries, and increased satisfaction among workers. Unsuc‑ cessful application, on the other hand, can lead to work‑related musculoskeletal disorders (MSDs). This article sets forth broad important background information on ergonomics so that the dental practitioner can have a general awareness of ergonomic risk factors as well as some basis for understanding the ongo‑ ing dialogue about ergonomics, its diagnosis, treatment, and regulation. This article provides alternatives to be considered by the practitioner in light of the practitioner's own circumstances, experiences and goals. A practitioner wishing to improve his or her work environment, for whatever reason, may wish to follow an incremental approach to such efforts, as is briefy discussed here. How to cite this article: Gupta A, Bhat M, Mohammed T, Bansal N, Gupta G. Ergonomics in Dentistry. Int J Clin Pediatr Dent 2014;7(1):30-34.

Developing hands-on ergonomics lessons for youth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C; Alexandre, M; Jacobs, K

2006-02-22

By the time students are ready to enter the workforce they have been exposed to up to 20 years of ergonomics risk factors. As technology evolves, it provides more opportunities for intensive repetitive motion and with computers, cell phones, personal digital assistants (PDAs), and electronic games. The average student engages in fewer active physical activities, sit stationary in mismatched furniture in schools for hours and carry heavy backpacks. While long-term effects remain to be identified, increasingly ergonomists and others concerned with musculoskeletal health and wellness, see a need for early ergonomics education. This interactive session provides a hands-on approach tomore » introducing ergonomics to students. Although different approaches may effectively introduce ergonomics at even early stages of development, this program was designed for youth at the middle to high school age. Attendees will participate in four activities designed to introduce ergonomics at an experiential level. The modules focus on grip strength, effective breathing, optimizing your chair, and backpack safety. The workshop will include presentation and worksheets designed for use by teachers with minimal ergonomics training. Feedback from the participants will be sought for further refining the usability and safety of the training package.« less

Occupational ergonomics in space

NASA Technical Reports Server (NTRS)

Stramler, J.

1992-01-01

Ergonomics is often defined simply as the study of work. Related or synonymous terms include human factors, human engineering, engineering psychology, and others. Occupational ergonomics is a term that has been proposed to describe the study of the working environment, including the physical consequences resulting from having an improperly designed workplace. The routine space working environment presents some problems not found in the typical Earthbound workplace. These include radiation, intravehicular contamination/pollution, temperature extremes, impact with other objects, limited psychosocial relationships, sensory deprivation, and reduced gravity. These are important workplace considerations, and may affect astronauts either directly at work or at some point during their life as a result of their work under these conditions. Some of the major issues associated with each of these hazards are presented.

The ergonomic process of an automotive company in Brazil: a study case.

PubMed

Bustos, Carolina; Fischer, Daniela; Ballardin, Lucimara; Nielsen, Rudolf

2012-01-01

The goal of this paper is to present the ergonomic process of an automotive company, whose focus is on the adaptation of the work conditions to the psychophysiological characteristics of its employees. The planning and the development of the ergonomic actions took place in three distinctive stages: ergonomic analysis of the work post (stage 1), ergonomic adaptations (stage 2) and Ergonomic Committee (stage 3). The activities started in June 2006 and have lasted to the current date, keeping a permanent improving process. The procedure adopted was based on the ergonomic analysis methodology proposed by Wisner (1994:1997) and the stages of the Ergonomic Analysis of Work presented in the 17 NR Regulatory Manual (MET, 2002). The paper's approach focused on the voluntary participation of workers from different areas and different hierarchical levels of the organization throughout all the stages of the process. The methodological procedures included descriptive research techniques, exploratory and qualitative research criteria, background and guidelines available in literature and legislation, as well as company information. Among the main results it can be mentioned the satisfaction of the employees regarding the appropriate work conditions, cultural and organizational changes and the creation of an Ergonomic Committee in the company.

'The perfect is the enemy of the good' - ergonomics research and practice. Institute of Ergonomics and Human Factors Annual Lecture 2010.

PubMed

Buckle, Peter

2011-01-01

The relationship between research and practice in ergonomics and human factors has rarely been addressed in the literature. This presents specific problems for researchers when seeking to relate their work to the research community. Equally, practitioners are often frustrated by the lack of appropriate research to meet their needs. This paper seeks to identify current drivers for ergonomics research along with an analysis of how these are changing. Specifically, the use of bibliometric data to assess research output and its impact on a multi-disciplinary subject such as ergonomics is examined. Areas where action may be required to stimulate better research and improved practice are proposed. These include a greater role for the practitioner in completing the circle of knowledge and improving the evidence base for practice with, in particular, practitioners becoming more active in determining research priorities. It is concluded that combined effort is needed by researcher and practitioner communities to enable and promote a more effective understanding of the true impact of ergonomics across industry and society. STATEMENT OF RELEVANCE: The relationship between ergonomics research and practice is examined. Research 'drivers' are identified, including the influence of bibliometric data. Implications for researchers and practitioners are discussed. The role of practitioners in completing the circle of knowledge and improving the ergonomics evidence base is stressed, as is the need to promote the impact of ergonomics across society.

International Ergonomics Association Activities and Constituent Societies

DTIC Science & Technology

1988-05-01

science, home economics, psychology and social science. The research papers presented at the annual meeting reflect this broad range of interests...of health of the Polish population, general problems of social and human development, as well as ergonomic issues in architecture, design, and the...Ergonomics Society C. N. Ong Department of Social Medicine and Public Health National University of Singapore Lower Kent Ridge Road Singapore 0511

Occupational ergonomics and injury prevention.

PubMed

Stobbe, T J

1996-01-01

Ergonomics is the study of people at work. The current focus is on the prevention of work-induced musculoskeletal injuries through the application of sound ergonomic principles. This chapter has briefly outlined ergonomics and its history, has described low back pain and upper extremity cumulative trauma disorders from an ergonomic perspective, and has discussed control and prevention approaches for a few scenarios. Ergonomic principles are based on a combination of science and engineering and a thorough understanding of human capabilities and limitations. When these principles are applied to the design of a job, task, process, or procedure, the incidence and severity of musculoskeletal injuries decrease. In many cases productivity and morale also improve. Workers are spared suffering, and employers are spared costs. It is hoped that this discussion will encourage more health, safety, and business professionals to learn about and apply ergonomics in their workplaces for the improvement of the worker, product, and business. Finally, many additional epidemiologic studies on the individual and joint effects of the CTD risk factors are needed. The knowledge gained from these studies will promote the more effective application of ergonomic principles to reduce worker suffering, improve products, and reduce costs.

A review and exploration of sociotechnical ergonomics.

PubMed

Dirkse van Schalkwyk, Riaan; Steenkamp, Rigard J

2017-09-01

A holistic review of ergonomic history shows that science remains important for general occupational health and safety (OSH), the broad society, culture, politics and the design of everyday things. Science provides an unconventional and multifaceted viewpoint exploring ergonomics from a social, corporate and OSH perspective. Ergonomic solutions from this mindset may redefine the science, and it will change with companies that change within this socially hyper-connected world. Authentic corporate social responsibility will counter 'misleadership' by not approaching ergonomics with an afterthought. The review concludes that ergonomics will be stronger with social respect and ergonomic thinking based on the optimisation of anthropometric data, digital human models, computer-aided tools, self-empowerment, job enrichment, work enlargement, physiology, industrial psychology, cybernetic ergonomics, operations design, ergonomic-friendly process technologies, ergonomic empowerment, behaviour-based safety, outcome-based employee wellness and fatigue risk management solutions, to mention a few.

Trapezius muscle activity in using ordinary and ergonomically designed dentistry chairs.

PubMed

Haddad, O; Sanjari, M A; Amirfazli, A; Narimani, R; Parnianpour, M

2012-04-01

Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Normalized EMG data showed significant reduction (p<0.05) in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

New procedures of ergonomics design in a large oil company.

PubMed

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Action in Ergonomics

ERIC Educational Resources Information Center

Training Officer, 1975

1975-01-01

A discussion with James Crowley of British Steel Corporation on the changing face of ergonomics in practice today and yesterday examines the influence of experimental psychology on the method of study and data collection. The broadening scope of ergonomics from only safety concerns to cost effectiveness and the computer are analyzed. (Author/JB)

Ergonomics, education and children: a personal view.

PubMed

Woodcock, A

2007-10-01

Educational ergonomics - the teaching of ergonomics and the design of environments where ergonomics teaching and learning might occur - has received little attention from ergonomists. This paper first describes the roots of the author's interest and research in educational ergonomics; second it provides a personal view of the opportunities and challenges posed by the two streams of educational ergonomics; and lastly it considers the implications of teaching ergonomics to children in terms of their personal development, the design of schools and the impact such initiatives might have on wider societal problems.

Implantation of an ergonomics administration system in a company: report of an occupational therapist specialist in ergonomics.

PubMed

Moraes, Berla; Andrade, Valéria Sousa

2012-01-01

This article aims to describe step-by-step the implementation of an ergonomics administration system in a company from March 2009 till March 2011 by an occupational therapist specialist in ergonomics based on the OSHAS 18001 guidelines and the Regulatory Norms 17 manual. The process began with the definition of five requisites with bases on the manual of application of the Regulatory Norms 17: survey; materials individual transportation and discharge; workplace furniture; workplace equipments; work environment and organization of the work to be managed with bases on the OSHAS 18001 guidelines. The following steps were established: sensitization of the company high administration, elaboration and institution of an ergonomics politics, development of ergonomics committees, ergonomics analysis of the work with recommendation of ergonomic improvements, implantation of improvements and evaluation or the results. This research experiment suggests the importance not only of a guiding axle but also of a professional qualification and participation of the company on the implementation of an ergonomics management system.

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

1998-01-01

Defines ergonomics and discusses design and environmental considerations. Suggests work-space requirements for: tables, chairs, monitor height, ambient noise and light, electricity, and environmental hazards. Includes sources for additional information related to ergonomic design. (AEF)

Corporate initiatives in ergonomics--an introduction.

PubMed

Hägg, Göran M

2003-01-01

Examples in the literature of corporate initiatives in ergonomics are reviewed. Different types of programmes are identified with ambitions ranging from time-limited interventions to continuous processes. Common elements are health surveillance, workstation design and choice of tools, product design, quality aspects, participative aspects and education, training and information. The implementation of ergonomics programmes varies substantially depending on the type of company, and company policies and organisation. Some of the most developed ergonomics programmes originate from the automobile industry. Other businesses with many established programmes are the electronics industry, the food industry and the office environment. A participative approach, as well as ergonomics expertise, are crucial ingredients for a successful programme. The scientific evaluation of ergonomics programmes, especially in economical terms, is in too many cases insufficient or missing. Furthermore, links to company core values such as quality improvement are often lacking. Programmes in ergonomics are still often seen as solely a matter of health and safety. Only a few companies have reached the state where ergonomics constitutes an integrated part of the overall strategy of the enterprise.

Nature: a new paradigm for well-being and ergonomics.

PubMed

Richardson, Miles; Maspero, Marta; Golightly, David; Sheffield, David; Staples, Vicki; Lumber, Ryan

2017-02-01

Nature is presented as a new paradigm for ergonomics. As a discipline concerned with well-being, the importance of natural environments for wellness should be part of ergonomics knowledge and practice. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being. Further, an emerging body of research has found relationships between well-being and a connection to nature, a concept that reveals the integrative character of human experience which can inform wider practice and epistemology in ergonomics. Practitioners are encouraged to bring nature into the workplace, so that ergonomics keeps pace with the move to nature-based solutions, but also as a necessity in the current ecological and social context. Practitioner Summary: Nature-based solutions are coming to the fore to address societal challenges such as well-being. As ergonomics is concerned with well-being, there is a need for a paradigm shift in the discipline. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being.

Designing for sustainability: ergonomics--carpe diem.

PubMed

Martin, K; Legg, S; Brown, C

2013-01-01

Sustainability is a global issue that has worldwide attention but the role of ergonomics in designing for sustainability is poorly understood and seldom considered. An analysis of the literature on ergonomics, design and sustainability was conducted via a search of electronic databases: Scopus, Business Source Complete, Google Scholar, Emerald Publishing, Academic Search Premiere, Web of Science, Discover and Ergonomics Abstracts, for the years 1995-2012. A total of 1934 articles fulfilled the search criteria, but content analysis of the abstracts indicated that only 14 refereed articles addressed the main search criteria. Of those seven were in ergonomics journals and seven were in other journals (and were not written by ergonomists). It is concluded that the contribution of ergonomics to sustainability and sustainable design has been limited, even though the goals of sustainability and ergonomics are congruent. Ergonomists have not been at the forefront of research contributing to sustainability - and it is time for them to 'seize the day' - 'carpe diem'. This literature review shows that ergonomics contribution to sustainability is limited but since there is congruence between the disciplines it calls for ergonomists to become more involved and to seize the day - carpe diem.

The Physical Demands and Ergonomics of Working with Young Children.

ERIC Educational Resources Information Center

Gratz, Rene R.; Claffey, Anne; King, Phyllis; Scheuer, Gina

2002-01-01

Examines the physical demands and ergonomic concerns within child care settings. Discusses problem areas and ergonomic recommendations for room design and staff training. Presents important implications for writing job descriptions, determining essential job functions, orienting and training staff, and committing to improving the child care work…

Application of a mathematical model for ergonomics in lean manufacturing.

PubMed

Botti, Lucia; Mora, Cristina; Regattieri, Alberto

2017-10-01

The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

Physical ergonomics in veterinary dentistry.

PubMed

DeForge, Donald H

2002-12-01

Ergonomics is the application of a body of knowledge addressing the interactions between man and the total working environment, such as atmosphere, heat, light and sound, as well as all tools and equipment of the workplace. Work related musculoskeletal injuries, caused by poor posture, have been discussed in human dentistry for several years. Veterinary dentistry, as a relatively new specialty within veterinary medicine, should address the ergonomics of poor posture without further delay to prevent work-related injuries. The generalist, as well as the specialist and their technicians, are subject to various neck and back disorders if proper ergonomic recommendations are not followed. This review article highlights basic ergonomic design principles for illumination and posture in veterinary dentistry.

OSHA sets final ergonomics rule.

PubMed

Tabone, S

2001-02-01

After years of advocating for an ergonomic regulation through the Occupational Safety and Health Administration (OSHA), at last on November 14, 2000, the final standards were issued. The OSHA Ergonomic Standards are designed to prevent musculoskeletal injury by matching workplace conditions to job demands. This rule will provide long awaited relief to nurses in direct care who have worked for years without benefit, in most cases, of technology that could have prevented ergonomic injury.

A new ergonomically improved lathe.

PubMed

Harten, G A; Derks, P M

1975-09-01

Following frequent complaints of lower back pain by lathe operators, a working group from the Philips Ergonomics Department have produced a model of an ergonomically improved lathe which ensures a healthy posture for the lathe operator at work. The same healthy posture can be adopted whether the operator is sitting or standing. The operator also has a good view of his work. At least two manufacturers have undertaken to develop this ergonomic lathe.

ERGONOMICS ABSTRACTS 48347-48982.

ERIC Educational Resources Information Center

Ministry of Technology, London (England). Warren Spring Lab.

IN THIS COLLECTION OF ERGONOMICS ABSTRACTS AND ANNOTATIONS THE FOLLOWING AREAS OF CONCERN ARE REPRESENTED--GENERAL REFERENCES, METHODS, FACILITIES, AND EQUIPMENT RELATING TO ERGONOMICS, SYSTEMS OF MAN AND MACHINES, VISUAL, AUDITORY, AND OTHER SENSORY INPUTS AND PROCESSES (INCLUDING SPEECH AND INTELLIGIBILITY), INPUT CHANNELS, BODY MEASUREMENTS,…

Ergonomics: Injury Protection You Can Afford.

ERIC Educational Resources Information Center

Sturgeon, Julie

1998-01-01

Examines the physical health risks attributed to poor furniture and equipment ergonomics and looks at ways to help assure that furniture and equipment purchases and practices are ergonomically sound. Cautions to be wary wary of marketing hype that a company's furniture is ergonomically set, and acquire adjustable furniture and encourage students…

Achieving LEED credit for ergonomics: Laying the foundation.

PubMed

Lynch, Mallory

2014-01-01

Despite guidance from the United States Green Building Council (USGBC) on the requirements for earning a Leadership in Energy and Environmental Design (LEED) ergonomics credit in the Innovation in Design and Innovation in Operations category, few projects have received the credit. The University of California, Berkeley ergonomics program, Ergonomics@Work, has aligned the ergonomics strategy to those of the USGBC and LEED to achieve the ergonomics credit in several new buildings. This article describes the steps needed to obtain the credit and highlights the opportunities it creates to partner with the project team to promote ergonomics. As a profession it is up to ergonomists to create the road map that incorporates ergonomics into the green building design.

Overview of ergonomics built environment.

PubMed

Costa, Ana Paula Lima; Campos, Fábio; Villarouco, Vilma

2012-01-01

This article provides an overview of academic research in the scientific discipline of ergonomics in the context of the built environment, from data collected from journals, conferences and research groups whose focus is the theme of the Ergonomics of Built Environment. Starting from the context of the Ergonomics of Built Environment, it identifies the broadcast media who publish work in this area and its scientific production, seeking to recover from the first published papers to the production of the most recent scientific journals and conferences to be launched 2010. From this mapping, we identified the major outstanding and open issues in these studies, outlining the state of the art Ergonomics Built Environment, in order to inform those interested and intend to develop scientific research in this field.

The Need to Reevaluate Nonresponding Ergonomic Patients

NASA Technical Reports Server (NTRS)

Scarpa, Philip J.; Field, Steven A.

1999-01-01

The Kennedy Space Center (KSC) Environmental Health (EH) contractor performs ergonomic evaluations under its Ergonomic Program. Any KSC employee may request one or the reviewing physician may request one for a patient during a visit to an onsite medical facility. As part of the ergonomic evaluation, recommendations are given to the patient to help reduce any ergonomic problems they experience. The recommendations, if implemented, are successful in the majority of KSC patients; however, a group of patients do not seem to improve. Those who don't improve may be identified by reevaluations, which are performed to implement maximum resolution of ergonomic problems.

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

PubMed

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

Ergonomics: A Commonsense Activity That Can Save Schools Money.

ERIC Educational Resources Information Center

Fleer, Paul; Gauthier-Green, Erin

2002-01-01

Describes the use of ergonomics to reduce work-related musculoskeletal disorders such as back pain, tendonitis, and carpal tunnel syndrome. Describes ergonomics and how to identify ergonomic problems, conduct a job hazard analysis, and develop solutions. Also lists common ergonomic errors in schools. Provides an ergonomic checklist for employees…

Ergonomic material-handling device

DOEpatents

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Ergonomics in industrially developing countries: a literature review.

PubMed

Huck-Soo, Loo; Richardson, Stanley

2012-12-01

The two final decades of the 20th century saw a significant increase in ergonomics activity (and resulting publications) in industrially developing countries (IDCs). However, a few ergonomics papers from Singapore, for example, were published in 1969 and 1970. This paper reviews developments in ergonomics in industrially developing countries from 1969 relying heavily on published papers although their quality varies considerably. Some criticism of these papers is offered. Most were concerned with the use of work tools, workstation operations, material handling and working environments especially in tropical climates. The similar problems encountered in a variety of countries are discussed, and the importance of low-cost solutions stressed. This study presents an overview of er gonomics research in IDCs. It concentrates on ASEAN countries whilst recognising the valuable work done in other areas.

A model of ergonomics intervention in industry: case study in Japan.

PubMed

Chavalitsakulchai, P; Ohkubo, T; Shahnavaz, H

1994-06-01

This paper presents the results of an ergonomics survey in four different Japanese work places. The survey consisted of two parts. In the first part, the physical and psycho-social problems of the female workers were investigated. Questionnaire techniques were used to assess musculoskeletal disorders in various parts of the body and of psycho-social stress at work as well as in the daily life situation. Furthermore, work posture analysis, task analysis, simple clinical tests and flexibility tests were conducted. In the second part, the ergonomics intervention practices in different types of Japanese work places were examined. Three different questionnaires were developed and used to collect information from representatives of employees, management and responsible governmental agents of the Department of Industrial Safety and Health, Ministry of Labor, with regard to ergonomic interventions at work places. Management, employees, and government representatives expressed desire for cooperation and participation for arrangement of the ergonomics intervention program. A model for appropriate ergonomics intervention in industry is developed with regard to physical and psycho-social problems at work. Factors influencing worker participation and the establishment of a dynamic system of ergonomics intervention at work places are discussed. Practical ways for improving the working conditions of female workers are: (i) cooperation between managers, workers, and government officers is regarded as vital for the ergonomics intervention program, (ii) worker participation, (iii) appropriate training course with regard to ergonomics education, and (iv) managerial support.

Development of ergonomics audits for bagging, haul truck and maintenance and repair operations in mining.

PubMed

Dempsey, Patrick G; Pollard, Jonisha; Porter, William L; Mayton, Alan; Heberger, John R; Gallagher, Sean; Reardon, Leanna; Drury, Colin G

2017-12-01

The development and testing of ergonomics and safety audits for small and bulk bag filling, haul truck and maintenance and repair operations in coal preparation and mineral processing plants found at surface mine sites is described. The content for the audits was derived from diverse sources of information on ergonomics and safety deficiencies including: analysis of injury, illness and fatality data and reports; task analysis; empirical laboratory studies of particular tasks; field studies and observations at mine sites; and maintenance records. These diverse sources of information were utilised to establish construct validity of the modular audits that were developed for use by mine safety personnel. User and interrater reliability testing was carried out prior to finalising the audits. The audits can be implemented using downloadable paper versions or with a free mobile NIOSH-developed Android application called ErgoMine. Practitioner Summary: The methodology used to develop ergonomics audits for three types of mining operations is described. Various sources of audit content are compared and contrasted to serve as a guide for developing ergonomics audits for other occupational contexts.

Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

PubMed

Woo, E H C; White, P; Lai, C W K

2016-03-01

This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

An effective model for ergonomic optimization applied to a new automotive assembly line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-08

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assemblymore » line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.« less

An effective model for ergonomic optimization applied to a new automotive assembly line

NASA Astrophysics Data System (ADS)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

PubMed

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

An ergonomic garment design for elderly Turkish men.

PubMed

Civitci, S Sule

2004-05-01

This paper presents an ergonomic garment design for elderly Turkish men. The purpose of this study was to determine elderly men's demands, needs and problems in regard to clothing and to design an ergonomic garment in the light of this knowledge. The sample consisted of 120 elderly men living in Ankara, the capital city of Turkey, and its province. A questionnaire was prepared and given to these people in order to determine their clothing demands and needs. It was established that most of our subjects need functional garments. An ergonomic garment has been designed using the obtained data. It was found that the design of clothing for the elderly requires attention to bodily changes from aging in order to facilitate and raise the quality of life. Specific suggestions are made to elderly people and to the ready-to-wear sector.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

NASA Astrophysics Data System (ADS)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

Ergonomics in the computer workstation.

PubMed

Karoney, M J; Mburu, S K; Ndegwa, D W; Nyaichowa, A G; Odera, E B

2010-09-01

Awareness of effects of long term use of computer and application of ergonomics in the computer workstation is important for preventing musculoskeletal disorders, eyestrain and psychosocial effects. To determine the awareness of physical and psychological effects of prolonged computer usage and application of ergonomicsin the workstation. One hundred and eighty one people were interviewed from tertiary educational institutions, telecommunications and media houses within Nairobi, Kenya. Descriptive cross sectional study. Majority (89.8%) of the respondents felt that prolonged computer use had an adverse effect on their health, with only 12.4% having received formal training on the same. Assessment of their workstations revealed the most applied ergonomic measure as feet placement on the floor: 100% (181) followed by correct monitor placement with 94.4% (171) fulfilling the requirements. The least applied ergonomic measures were non reflecting wall paint: 5% (9) and adjustable desk 9.9% (18). There is awareness among computer users on the effects of prolonged computer use but there is limited application of ergonomic measures.

Ergonomics issues in national identity card for homeland security.

PubMed

Yeow, Paul H P; Yuen, Y Y; Loo, W H

2013-09-01

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens' Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[Vision of the future of ergonomics in dentistry].

PubMed

Hokwerda, O

2008-08-01

With respect to ergonomics in dentistry, more people are becoming aware of occupational hazards and paying more attention to the prevention of hazards. Dutch law on health and safety at work requires dentists to protect the health and safety of their employees and educational institutions to protect the health and safety of their students. In the meantime a summary has appeared of the ergonomic standards required for the working methods of dentists and for the development of future equipment. Further development of dental ergonomics must take place on the basis of a coherent vision of the future. In this regard it must be clear exactly what ergonomics is and what developments have already taken place. Aspects of particular interest are the prevention of occupational diseases, legal responsibility for protecting the health and safety of employees and students, education in dental ergonomics for dental and oral hygiene students, the academic development and research of dental ergonomics, using organizational models in daily dental practice, and the development of ergonomics at the European level.

The stage of change approach for implementing ergonomics advice - Translating research into practice.

PubMed

Rothmore, Paul; Aylward, Paul; Oakman, Jodi; Tappin, David; Gray, Jodi; Karnon, Jonathan

2017-03-01

The Stage of Change (SOC) approach has been proposed as a method to improve the implementation of ergonomics advice. However, despite evidence for its efficacy there is little evidence to suggest it has been adopted by ergonomics consultants. This paper investigates barriers and facilitators to the implementation, monitoring and effectiveness of ergonomics advice and the adoption of the SOC approach in a series of focus groups and a subsequent survey of members of the Human Factors Societies of Australia and New Zealand. A proposed SOC assessment tool developed for use by ergonomics practitioners is presented. Findings from this study suggest the limited application of a SOC based approach to work-related musculoskeletal injury prevention by ergonomics practitioners is due to the absence of a suitable tool in the ergonomists' repertoire, the need for training in this approach, and their limited access to relevant research findings. The final translation of the SOC assessment tool into professional ergonomics practice will require accessible demonstration of its real-world usability to practitioners and the training of ergonomics practitioners in its application. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Ergonomic movement in dentistry].

PubMed

Bos-Huizer, J J A; Bolderman, F W

2014-02-01

'Ergonomic movement in dentistry' is a recently developed ergonomic programme for dental healthcare professionals which is intended to prevent work-related complaints and assist in recovering from them. The programme is recommended by disability insurers in cases of specific physical complaints, limitations or disability, as a consequence of which a dental healthcare professional is unable to carry out his or her work. In a four-day training programme, in one's own workplace, skills are taught in the areas of work organization, work attitude and movement. These skills are directly applied in the treatment ofpatients and, if necessary, further improved. In this way, one advances step by step to an ergonomic way of working. Evaluations have shown that the programme is advantageous for the attitude toward work, the workplace and the work organization as well as the reduction of disability.

Translating concepts of complexity to the field of ergonomics.

PubMed

Walker, Guy H; Stanton, Neville A; Salmon, Paul M; Jenkins, Daniel P; Rafferty, Laura

2010-10-01

Since 1958 more than 80 journal papers from the mainstream ergonomics literature have used either the words 'complex' or 'complexity' in their titles. Of those, more than 90% have been published in only the past 20 years. This observation communicates something interesting about the way in which contemporary ergonomics problems are being understood. The study of complexity itself derives from non-linear mathematics but many of its core concepts have found analogies in numerous non-mathematical domains. Set against this cross-disciplinary background, the current paper aims to provide a similar initial mapping to the field of ergonomics. In it, the ergonomics problem space, complexity metrics and powerful concepts such as emergence raise complexity to the status of an important contingency factor in achieving a match between ergonomics problems and ergonomics methods. The concept of relative predictive efficiency is used to illustrate how this match could be achieved in practice. What is clear overall is that a major source of, and solution to, complexity are the humans in systems. Understanding complexity on its own terms offers the potential to leverage disproportionate effects from ergonomics interventions and to tighten up the often loose usage of the term in the titles of ergonomics papers. STATEMENT OF RELEVANCE: This paper reviews and discusses concepts from the study of complexity and maps them to ergonomics problems and methods. It concludes that humans are a major source of and solution to complexity in systems and that complexity is a powerful contingency factor, which should be considered to ensure that ergonomics approaches match the true nature of ergonomics problems.

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery

PubMed Central

2017-01-01

Objective To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. Methods The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). Results There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ2 test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (p<0.05). Gynecologists who felt highly confident about managing ergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (p<0.05). In minimizing their symptoms, surgeons changed ergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (p<0.05). The most common robotic system components to be improved for better ergonomics were microphone/speaker, pedal design, and finger clutch. Conclusion More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. PMID:28657231

Ergonomics and regulatory politics: the Washington State case.

PubMed

Silverstein, Michael

2007-05-01

Every year in the State of Washington more than 50,000 workers experience a work related musculoskeletal disorder (WMSD), making up more than 30% of all worker compensation cases. In 2000, the Washington State Department of Labor and Industries (L&I) adopted a workplace ergonomics rule requiring employers to reduce worker exposure to hazards that cause or contribute to WMSDs. In 2003, the ergonomics rule was repealed by a margin of 53.5-46.5 in a statewide voter initiative. The official rulemaking record of approximately 100,000 pages, along with supplementary published and unpublished material, was reviewed. The relationship between scientific deliberation and the public policy process in adopting and repealing the ergonomics rule was assessed and described. The deliberative features of the regulatory, judicial, legislative, and ballot processes were compared. The ergonomics rule was successful in the regulatory and legal arenas where the process was most transparent and open to public involvement, differing views could be presented fully, and decision makers were expected to explain their decisions in light of the record. The rule fared most poorly in the legislature and at the ballot box when these features were lost and where considered deliberation was replaced by unconstrained political conflict. Additional checks and balances are needed.

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery.

PubMed

Lee, Mija Ruth; Lee, Gyusung Isaiah

2017-09-01

To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ² test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (p<0.05). Gynecologists who felt highly confident about managing ergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (p<0.05). In minimizing their symptoms, surgeons changed ergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (p<0.05). The most common robotic system components to be improved for better ergonomics were microphone/speaker, pedal design, and finger clutch. More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. Copyright © 2017. Asian Society of Gynecologic Oncology, Korean Society

Do we need sustainability as a new approach in human factors and ergonomics?

PubMed

Zink, Klaus J; Fischer, Klaus

2013-01-01

The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.

Indonesia ergonomics roadmap: where we are going?

PubMed

Wignjosoebroto, Sritomo

2007-12-01

There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least

Ergonomics and design: traffic sign and street name sign.

PubMed

Moroni, Janaina Luisa da Silva; Aymone, José Luís Farinatti

2012-01-01

This work proposes a design methodology using ergonomics and anthropometry concepts applied to traffic sign and street name sign projects. Initially, a literature revision on cognitive ergonomics and anthropometry is performed. Several authors and their design methodologies are analyzed and the aspects to be considered in projects of traffic and street name signs are selected and other specific aspects are proposed for the design methodology. A case study of the signs of "Street of Antiques" in Porto Alegre city is presented. To do that, interviews with the population are made to evaluate the current situation of signs. After that, a new sign proposal with virtual prototyping is done using the developed methodology. The results obtained with new interviews about the proposal show the user satisfaction and the importance of cognitive ergonomics to development of this type of urban furniture.

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

PubMed

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Applying ergonomics to systems: some documented "lessons learned".

PubMed

Hendrick, Hal W

2008-07-01

Based on evidence accumulated during the author's 45 years of professional experience, the author presents 23 important "lessons learned" regarding applying ergonomics to systems. Documented results from reported cases or other evidence are presented to validate each of these practical learning points.

Ergonomic design for dental offices.

PubMed

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

Users/consumers differences regarding ergonomics and design theory and practice.

PubMed

Dejean, Pierre-Henri; Wagstaff, Peter

2012-01-01

This paper presents the concept of direct and indirect users, a key issue to cooperation between ergonomists, designers and managers involved in a sustainable approach to design. What issues for Ergonomics and Design are launched by this concept? User/consumer differences should be approached taking into account Ergonomics and Design theory and practice. What dialogue and tools could help the ergonomist/designer/manager to respond to all the requirements of the future clients of the product?

Introducing Ergonomics in Two US Elementary Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C L; Tien, D

2003-06-25

The increasing presence of computers and other forms of information and communications technology (ICT) in schools has raised concerns in the United States (US) and elsewhere. Children are using computers more than any other age group in the US. It is not known whether early intensive use of ICT predisposes children to future injury. Ergonomics is not included in state curriculum standards or requirements but can be supported by some of the existing standards. Some who believe that children are better off being educated early about ergonomics are taking action to bring ergonomics into elementary and secondary schools. This papermore » describes the process used to introduce ergonomics into two elementary schools in two different states by initiators with two different roles.« less

Mass of materials: the impact of designers on construction ergonomics.

PubMed

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

Strategies and arguments of ergonomic design for sustainability.

PubMed

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

The PhOCoe Model--ergonomic pattern mapping in participatory design processes.

PubMed

Silva e Santos, Marcello

2012-01-01

The discipline and practice of human factors and ergonomics is quite rich in terms of the availability of analysis, development and evaluation tools and methods for its various processes. However, we lack effective instruments to either map or regulate comprehensively and effectively, cognitive and organizational related impacts, especially the environmental ones. Moreover, when ergonomic transformations through design - such as a new workstation design or even an entire new facility - is at play, ergonomics professionals tend to stay at bay, relying solely on design professionals and engineers. There is vast empirical evidence showing that participation of ergonomists as project facilitators, may contribute to an effective professional synergy amongst the various stakeholders in a multidisciplinary venue. When that happens, everyone wins - users and designers alike -because eventual conflicts, raised up in the midst of options selection, are dissipated in exchange for more convergent design alternatives. This paper presents a method for participatory design, in which users are encouraged to actively participate in the whole design process by sharing their real work activities with the design team. The negotiated results inferred from the ergonomic action and translated into a new design, are then compiled into a "Ergonomic Pattern Manual". This handbook of ergonomics-oriented design guidelines contains essential guidelines to be consulted in recurrent design project situations in which similar patterns might be used. The main drive is simple: nobody knows better than workers themselves what an adequate workplace design solution (equipment, workstation, office layout) should be.

State of Science: ergonomics and global issues.

PubMed

Thatcher, Andrew; Waterson, Patrick; Todd, Andrew; Moray, Neville

2018-02-01

In his 1993 IEA keynote address, Neville Moray urged the ergonomics discipline to face up to the global problems facing humanity and consider how ergonomics might help find some of the solutions. In this State of Science article we critically evaluate what the ergonomics discipline has achieved in the last two and a half decades to help create a secure future for humanity. Moray's challenges for ergonomics included deriving a value structure that moves us beyond a Westernised view of worker-organisation-technology fit, taking a multidisciplinary approach which engages with other social and biological sciences, considering the gross cross-cultural factors that determine how different societies function, paying more attention to mindful consumption, and embracing the complexity of our interconnected world. This article takes a socio-historical approach by considering the factors that influence what has been achieved since Moray's keynote address. We conclude with our own set of predictions for the future and priorities for addressing the challenges that we are likely to face. Practitioner Summary: We critically reflect on what has been achieved by the ergonomics profession in addressing the global challenges raised by Moray's 1993 keynote address to the International Ergonomics Association. Apart from healthcare, the response has largely been weak and disorganised. We make suggestions for priority research and practice that is required to facilitate a sustainable future for humanity.

Ergonomic positioning or equipment for treating carpal tunnel syndrome.

PubMed

O'Connor, Denise; Page, Matthew J; Marshall, Shawn C; Massy-Westropp, Nicola

2012-01-18

Non-surgical treatment, including ergonomic positioning or equipment, are sometimes offered to people experiencing mild to moderate symptoms from carpal tunnel syndrome (CTS). The effectiveness and duration of benefit from ergonomic positioning or equipment interventions for treating CTS are unknown. To assess the effects of ergonomic positioning or equipment compared with no treatment, a placebo or another non-surgical intervention in people with CTS. We searched the Cochrane Neuromuscular Disease Group Specialized Register (14 June 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (2011, Issue 2, in The Cochrane Library), MEDLINE (1966 to June 2011), EMBASE (1980 to June 2011), CINAHL Plus (1937 to June 2011), and AMED (1985 to June 2011). We also reviewed the reference lists of randomised or quasi-randomised trials identified from the electronic search. Randomised or quasi-randomised controlled trials comparing ergonomic positioning or equipment with no treatment, placebo or another non-surgical intervention in people with CTS. Two review authors independently selected trials for inclusion, extracted data and assessed risk of bias of included studies. We calculated risk ratios (RR) and mean differences (MD) with 95% confidence intervals (CI) for the primary and secondary outcomes. We pooled results of clinically and statistically homogeneous trials, where possible, to provide estimates of the effect of ergonomic positioning or equipment. We included two trials (105 participants) comparing ergonomic versus placebo keyboards. Neither trial assessed the primary outcome (short-term overall improvement) or adverse effects of interventions. In one small trial (25 participants) an ergonomic keyboard significantly reduced pain after 12 weeks (MD -2.40; 95% CI -4.45 to -0.35) but not six weeks (MD -0.20; 95% CI -1.51 to 1.11). In this same study, there was no difference between ergonomic and standard keyboards in hand function at six or 12 weeks or palm

Ergonomic Microscope: Need of the Hour

PubMed Central

Mhaske, Shubhangi Ashok; Ahmad, Malik Ajaz; Yuwanati, Monal B.; Prabhu, Shweta; Pardhe, Nilesh

2015-01-01

Background Prolonged use of conventional microscope develops musculo-skeletal injuries like chronic pain syndrome, including shoulder, neck, back aches & fatigue. Since the problems go unnoticed, the injuries can lead to some serious permanent damages. This further leads to a compromise in the health and welfare of the person and the institute. Hence, an understanding about the ergonomics is the need of the hour in this postmodern era. Inspite of few studies and surveys about ergonomics, there is still a steep rise in the musculoskeletal disorders. Aim of the Study The aim of our study was to gauge the general awareness of pathologists, microbiologists and oral pathologists towards ergonomics in their profession. Materials and Methods A cross-sectional survey based study was de­signed, which included a questionnaire. The questionnaire included multiple choice questions with four alternatives. Professionals (pathologists, microbiologists and oral pathologists) were included in the survey. Teaching faculty (Professors, Associate Professors and Lecturers) and Post graduate students formed the study group. Results and Observations The response to the questionnaire was 100%. Less than 50% of oral pathologists were aware of the importance of ergonomics in their profession. The most common site affected was neck and back. One of the drastic observations was that, Oral Pathologists suffered from a combination of problems affecting neck, back, eyes, headache, shoulders, arms and wrists. Conclusion Increase in our understanding regarding ergonomic­ally designed microscopes can increase our efficiency and in turn improve our general well-being. With improvements in ergonomics, professionals would be able to modify and optimize their working conditions. Certain guidelines need to be followed by the profes­sionals to reduce chances of musculoskeletal disorders. PMID:26155565

Crossing levels in systems ergonomics: a framework to support 'mesoergonomic' inquiry.

PubMed

Karsh, Ben-Tzion; Waterson, Patrick; Holden, Richard J

2014-01-01

In this paper we elaborate and articulate the need for what has been termed 'mesoergonomics'. In particular, we argue that the concept has the potential to bridge the gap between, and integrate, established work within the domains of micro- and macroergonomics. Mesoergonomics is defined as an open systems approach to human factors and ergonomics (HFE) theory and research whereby the relationship between variables in at least two different system levels or echelons is studied, and where the dependent variables are human factors and ergonomic constructs. We present a framework which can be used to structure a set of questions for future work and prompt further empirical and conceptual inquiry. The framework consists of four steps: (1) establishing the purpose of the mesoergonomic investigation; (2) selecting human factors and ergonomics variables; (3) selecting a specific type of mesoergonomic investigation; and (4) establishing relationships between system levels. In addition, we describe two case studies which illustrate the workings of the framework and the value of adopting a mesoergonomic perspective within HFE. The paper concludes with a set of issues which could form part of a future agenda for research within systems ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics action research I: shifting from hypothesis testing to experiential learning.

PubMed

Neumann, W P; Dixon, S M; Ekman, M

2012-01-01

This paper presents the case for the need for 'Action Research' (AR) approaches to gain understanding of how ergonomics considerations can best be integrated into the design of new work systems. The AR researchers work collaboratively with other stakeholders to solve a real-world problem: gaining insight into the problem and factors influencing solution building from an embedded position in the development process. This experience is interpreted in terms of available theory and can support further theory development. This non-experimental approach can help provide practical new approaches for integrating ergonomics considerations into real work system design processes. The AR approach suffers from a lack of acceptance by conventionally trained scientists. This paper aims to help overcome this weakness by developing the underlying theory and rationale for using AR approaches in ergonomics research. We propose further development of hybrid approaches which incorporate other evaluation techniques to extend the knowledge gains from AR projects. Researchers should engage directly with organisations in ergonomics projects so that they can better understand the challenges and needs of practitioners who are trying to apply available scientific knowledge in their own unique context. Such 'Action Research' could help develop theory and approaches useful to improve mobilisation and application of ergonomics knowledge in organisations.

ARBAN-A new method for analysis of ergonomic effort.

PubMed

Holzmann, P

1982-06-01

ARBAN is a method for the ergonomic analysis of work, including work situations which involve widely differing body postures and loads. The idea of the method is thal all phases of the analysis process that imply specific knowledge on ergonomics are teken over by filming equipment and a computer routine. All tasks that must be carried out by the investigator in the process of analysis are so designed that they appear as evident by the use of systematic common sense. The ARBAN analysis method contains four steps: 1. Recording of the workplace situation on video or film. 2. Coding the posture and load situation at a number of closely spaced 'frozen' situations. 3. Computerisation. 4. Evaluation of the results. The computer calculates figures for the total ergonomic stress on the whole body as well as on different parts of the body separately. They are presented as 'Ergonomic stress/ time curves', where the heavy load situations occur as peaks of the curve. The work cycle may also be divided into different tasks, where the stress and duration patterns can be compared. The integral of the curves are calculated for single-figure comparison of different tasks as well as different work situations.

Ergonomic task analysis of ultrasound-guided femoral nerve block: a pilot study.

PubMed

Ajmal, Muhammad; Power, Susan; Smith, Tim; Shorten, George D

2011-02-01

To apply ergonomic task analysis to the performance of ultrasound-guided (US-guided) femoral nerve block (FNB) in an acute hospital setting. Pilot prospective observational study. Orthopedic operating room of a regional trauma hospital. 15 anesthesiologists of various levels of experience in US-guided FNB (estimated minimum experience < 10 procedures; maximum about 50 procedures, and from basic trainees to consultants); and 15 patients (5 men and 10 women), aged 77 ± 15 (mean ± SD yrs) years. MEASUREMENTS/OBSERVATIONS: A data capture "tool", which was modified from one previously developed for ergonomic study of spinal anesthesia, was studied. Patient, operator, and heterogeneous environmental factors related to ergonomic performance of US-guided FNB were identified. The observation period started immediately before commencement of positioning the patient and ended on completion of perineural injection. Data were acquired using direct observations, photography, and application of a questionnaire. The quality of ergonomic performance was generally suboptimal and varied greatly among operators. Eight (experience < 10 procedures) of 15 operators excessively rotated their head, neck, and/or back to visualize the image on the ultrasound machine. Eight operators (experience < 10 procedures) performed the procedure with excessive thoracolumbar flexion. Performance of US-guided FNB presents ergonomic challenges and was suboptimal during most of the procedures observed. Formal training in US-guided peripheral nerve blockade should include reference to ergonomic factors. Copyright © 2011 Elsevier Inc. All rights reserved.

Dento-ergonomics: the key to energy-saving performance.

PubMed

Pollack, R

1996-04-01

The application of ergonomics to dentistry, or dento-ergonomics, can increase efficiency and prevent injury. Among the factors that need to be considered are the height and reach of staff members, the equipment being used and the distribution of tasks. By implementing the theories of ergonomics, dental care providers can prolong their interest and commitment to dentistry by making difficult or even painful tasks less stressful.

A brief essay on ergonomics in graphic design.

PubMed

Mendonça, André N F; van der Linden, Júlio C S; Fonseca, Tania M G

2012-01-01

Through Brazilian publication revision on the relations amongst Ergonomics and Design, we observed the tendency towards an approach focusing on product design. However, it is our duty to question which would be the influences of ergonomics in the graphic design. As a methodology, we considered the identification that the practices derived from ergonomics as epistemic system found in the main bibliography related to graphic design.

Ergonomics in the electronic library.

PubMed Central

Thibodeau, P L; Melamut, S J

1995-01-01

New technologies are changing the face of information services and how those services are delivered. Libraries spend a great deal of time planning the hardware and software implementations of electronic information services, but the human factors are often overlooked. Computers and electronic tools have changed the nature of many librarians' daily work, creating new problems, including stress, fatigue, and cumulative trauma disorders. Ergonomic issues need to be considered when designing or redesigning facilities for electronic resources and services. Libraries can prevent some of the common problems that appear in the digital workplace by paying attention to basic ergonomic issues when designing workstations and work areas. Proper monitor placement, lighting, workstation setup, and seating prevent many of the common occupational problems associated with computers. Staff training will further reduce the likelihood of ergonomic problems in the electronic workplace. PMID:7581189

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial.

PubMed

Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

2014-04-17

More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance strategies. When these strategies are

30 years of ergonomics at 3M: a case study.

PubMed

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

Avoid Workplace Injury through Ergonomics | Poster

Cancer.gov

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases

Dental Hygiene Students' Self-Assessment of Ergonomics Utilizing Photography.

PubMed

Partido, Brian B

2017-10-01

Due to postural demands, dental professionals are at high risk for developing work-related musculoskeletal disorders (WMSDs). Dental clinicians' lack of ergonomic awareness may impede the clinical application of recommendations to improve their posture. The aim of this study was to determine whether feedback involving photography and self-assessment would improve dental hygiene students' ergonomic scores and accuracy of their ergonomic self-assessments. The study involved a randomized control design and used a convenience sample of all 32 junior-year dental hygiene students enrolled in the autumn 2016 term in The Ohio State University baccalaureate dental hygiene program. Sixteen students were randomly assigned to each of two groups (control and training). At weeks one and four, all participants were photographed and completed ergonomic self-evaluations using the Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks two and three, participants in the training group were photographed again and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were given ergonomic scores by three raters. Students' self-assessments in the control group and faculty evaluations of the training group showed significant improvement in scores over time (F(1,60)=4.25, p<0.05). In addition, the accuracy of self-assessment significantly improved for students in the training group (F(1,30)=8.29, p<0.01). In this study, dental hygiene students' self-assessments using photographs resulted in improvements in their ergonomic scores and increased accuracy of their ergonomic self-assessments. Any improvement in ergonomic score or awareness can help reduce the risks for WMSDs, especially among dental clinicians.

Ergonomics program management in Tucuruí Hydropower Plant using TPM methodology.

PubMed

Santos, R M; Sassi, A C; Sá, B M; Miguez, S A; Pardauil, A A

2012-01-01

This paper aims to present the benefits achieved in the ergonomics process management with the use of the TPM methodology (Total Productive Maintenance) in Tucuruí Hydropower Plant. The methodology is aligned with the corporate guidelines, moreover with the Strategic Planning of the company, it is represented in the TPM Pillars including the Health Pillar in which is inserted the ergonomics process. The results of the ergonomic actions demonstrated a 12% reduction over the absenteeism rate due to musculoskeletal disorders, solving 77,0% of ergonomic non-conformities, what favored the rise of the Organizational Climate in 44,8%, impacting on the overall performance of the company. Awards confirmed the success of the work by the achievement of the Award for TPM Excellence in 2001, Award for Excellence in Consistent TPM Commitment in 2009 and more recently the Special Award for TPM Achievement, 2010. The determination of the high rank administration and workers, allied with the involvement/dynamism of Pillars, has assured the success of this management practice in Tucuruí Hydropower Plant.

The ergonomics of learning: educational design and learning performance.

PubMed

Smith, T J

2007-10-01

The application of ergonomics/human factors (E/HF) principles and practices, and the implementation of ergonomics programmes, have achieved proven success in improving performance, productivity, competitiveness, and safety and health in most occupational sectors. However, the benefits that the application of E/HF science might bring to promoting student learning have yet to be widely recognized. This paper deals with the fundamental purpose of education - student learning - and with the question of how the ergonomic design of the learning environment influences learning performance. The underlying premise, embodied in the quote below, is that student learning performance to a substantial degree is context specific - influenced and specialized in relation to specific design factors in the learning environment. The basic scientific question confronting learning ergonomics is which design characteristics in the learning environment have the greatest influence on variability in learning performance. Practically, the basic challenge is to apply this scientific understanding to ergonomic interventions directed at design improvements of learning environments to benefit learning. This paper expands upon these themes by addressing the origins and scope of learning ergonomics, differing perspectives on the nature of learning, evidence for context specificity in learning and conclusions and research implications regarding an ergonomics perspective on learning.

Novel ergonomic postural assessment method (NERPA) using product-process computer aided engineering for ergonomic workplace design.

PubMed

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method's usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method.

Developing measures for information ergonomics in knowledge work.

PubMed

Franssila, Heljä; Okkonen, Jussi; Savolainen, Reijo

2016-03-01

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis. Practitioner Summary: The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.

Corporate ergonomics programme at Ford Motor Company.

PubMed

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

Validation of ergonomic instructions in robot-assisted surgery simulator training.

PubMed

Van't Hullenaar, C D P; Mertens, A C; Ruurda, J P; Broeders, I A M J

2018-05-01

Training in robot-assisted surgery focusses mainly on technical skills and instrument use. Training in optimal ergonomics during robotic surgery is often lacking, while improved ergonomics can be one of the key advantages of robot-assisted surgery. Therefore, the aim of this study was to assess whether a brief explanation on ergonomics of the console can improve body posture and performance. A comparative study was performed with 26 surgical interns and residents using the da Vinci skills simulator (Intuitive Surgical, Sunnyvale, CA). The intervention group received a compact instruction on ergonomic settings and coaching on clutch usage, while the control group received standard instructions for usage of the system. Participants performed two sets of five exercises. Analysis was performed on ergonomic score (RULA) and performance scores provided by the simulator. Mental and physical load scores (NASA-TLX and LED score) were also registered. The intervention group performed better in the clutch-oriented exercises, displaying less unnecessary movement and smaller deviation from the neutral position of the hands. The intervention group also scored significantly better on the RULA ergonomic score in both the exercises. No differences in overall performance scores and subjective scores were detected. The benefits of a brief instruction on ergonomics for novices are clear in this study. A single session of coaching and instruction leads to better ergonomic scores. The control group showed often inadequate ergonomic scores. No significant differences were found regarding physical discomfort, mental task load and overall performance scores.

From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

PubMed

Moraes, A S P; Arezes, P M; Vasconcelos, R

2012-01-01

The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

Ergonomics and sustainability: towards an embrace of complexity and emergence.

PubMed

Dekker, Sidney W A; Hancock, Peter A; Wilkin, Peter

2013-01-01

Technology offers a promising route to a sustainable future, and ergonomics can serve a vital role. The argument of this article is that the lasting success of sustainability initiatives in ergonomics hinges on an examination of ergonomics' own epistemology and ethics. The epistemology of ergonomics is fundamentally empiricist and positivist. This places practical constraints on its ability to address important issues such as sustainability, emergence and complexity. The implicit ethical position of ergonomics is one of neutrality, and its positivist epistemology generally puts value-laden questions outside the parameters of what it sees as scientific practice. We argue, by contrast, that a discipline that deals with both technology and human beings cannot avoid engaging with questions of complexity and emergence and seeking innovative ways of addressing these issues. Ergonomics has largely modelled its research on a reductive science, studying parts and problems to fix. In sustainability efforts, this can lead to mere local adaptations with a negative effect on global sustainability. Ergonomics must consider quality of life globally, appreciating complexity and emergent effects of local relationships.

Green ergonomics: challenges and opportunities.

PubMed

Hanson, Margaret A

2013-01-01

Addressing the causes and consequences of environmental degradation presents significant challenges for humankind. This paper considers what ergonomics/human factors (E/HF) professionals can contribute to understanding and tackling some of the issues that arise through the movement towards a more environmentally sustainable economy. These issues are considered in relation to work in green industries (specifically, sustainable energy production, recycling and organic food production), and there is a need to ensure that these jobs are safe and healthy; the design of products and systems that are 'environmentally friendly' to facilitate their acceptability and use and how E/HF professionals can contribute to understanding and promoting behavioural change relating to environmental choices. The activities of some international organisations in this area are identified and the potential for E/HF involvement is considered. The implications for the E/HF profession are discussed. This paper considers how ergonomics/human factors professionals can contribute to the movement towards more sustainable and 'environmentally friendly' design and work. Potential challenges and opportunities are discussed in relation to jobs in green industries, products and systems and behaviour change.

Ergonomics in the office environment

NASA Technical Reports Server (NTRS)

Courtney, Theodore K.

1993-01-01

Perhaps the four most popular 'ergonomic' office culprits are: (1) the computer or visual display terminal (VDT); (2) the office chair; (3) the workstation; and (4) other automated equipment such as the facsimile machine, photocopier, etc. Among the ergonomics issues in the office environment are visual fatigue, musculoskeletal disorders, and radiation/electromagnetic (VLF,ELF) field exposure from VDT's. We address each of these in turn and then review some regulatory considerations regarding such stressors in the office and general industrial environment.

Office ergonomics: deficiencies in computer workstation design.

PubMed

Shikdar, Ashraf A; Al-Kindi, Mahmoud A

2007-01-01

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.

Ergonomic workplace evaluation of an Asian garment-factory.

PubMed

Sarder, B; Imrhan, Sheik N; Mandahawi, Nabeel

2006-12-01

A large number of establishments in the garment industries of the world are situated in the southeastern part of Asia where labor is plentiful and cheap. Recent reports and observational studies suggest that employees in this industry often work under difficult conditions that are unacceptable in industrialized countries. This paper reports the results of an ergonomic study in an export garment manufacturing plant in South East Asia to evaluate the working conditions of the plant from an ergonomics/human factors perspective and to suggest possible solutions to management for implementation. The investigation was done by a questionnaire survey and by observations and measurements in the workplace. The results indicated that the plant conditions were stressful, involving long work hours with poor safety and labor relations, and that work equipment and the physical workplace design were acceptable ergonomic practices. A low-cost solution, presented to management by the investigators, was implemented and, over a period of six months, seemed to be the dominant reason for significant improvements in throughput (14.6%), reduction in absenteeism (65%), job satisfaction (40%), decrease in employee turnover (75%), and reduction in health complaints (50%).

Finding ergonomic solutions--participatory approaches.

PubMed

Hignett, Sue; Wilson, John R; Morris, Wendy

2005-05-01

This paper gives an overview of the theory of participatory ergonomics interventions and summary examples from a range of industries, including health care, military, manufacturing, production and processing, services, construction and transport. The definition of participatory approaches includes interventions at macro (organizational, systems) levels as well as micro (individual), where workers are given the opportunity and power to use their knowledge to address ergonomic problems relating to their own working activities. Examples are given where a cost-effective benefit has been measured using musculoskeletal sickness absence and compensation costs. Other examples, using different outcome measures, also showed improvements, for example, an increase in productivity, improved communication between staff and management, reduction in risk factors, the development of new processes and new designs for work environments and activities. Three cases are described from Canada and Japan where the participatory project was led by occupational health teams, suggesting that occupational health practitioners can have an important role to play in participatory ergonomics projects.

Participatory ergonomics intervention in an industrially developing country--a case study.

PubMed

Helali, Faramarz; Lönnroth, Emma-Christin; Shahnavaz, Houshang

2008-01-01

In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.

Self-assessment of ergonomics amongst dental students utilising photography: RCT.

PubMed

Partido, B B; Wright, B M

2018-03-02

Dental professionals are at high risk of musculoskeletal disorders (MSDs) due to static working positions for extended periods of time. Musculoskeletal pain has been identified as early as during their entry-level dental education. The purpose of this study was to determine whether feedback involving photography and self-assessment would improve ergonomic scores and the accuracy of ergonomic self-assessments amongst dental students. The study involved a randomised control design of 135 dental students. At weeks 1 and 4, participants were photographed, and at weeks 1 through 4, participants completed ergonomic self-evaluations, using a Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks 2 and 3, participants in the training group were photographed and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were evaluated for ergonomic scores by two raters. A mixed-design ANOVA of ergonomic scores revealed that ergonomic scores improved for all students who received the ergonomics training (F(1,254)=17.41, P < .001). In addition, a mixed-design ANOVA of kappa coefficient values between student and rater scores revealed that the accuracy of self-assessments improved for all students who received the ergonomics training (F(1,127)=6.33, P < .05). The use of photographs and self-assessment provides dental and dental hygiene educators with a pragmatic method to improve self-assessment skills, increase student awareness of any postural deviations from ideal and improve musculoskeletal health. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The dentist's operating posture - ergonomic aspects.

PubMed

Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

2014-06-15

The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist's physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture.

Ergonomics in mining: the Chilean experience.

PubMed

Apud, Elías

2012-12-01

The objective of this article is to analyze the current state of knowledge regarding ergonomics in Chilean mining. Information has been gathered during the past 15 years from studies of Chilean miners. This article is based on a compilation of information of 700 workplaces where physical, mental, environmental, and organizational loads were evaluated with a systemic approach. The results of the Chilean experience reveal that it is important to overcome the concept of "static" ergonomics focused on workplaces that may be valid for offices and machine operation but not for a significant number of miners who will be moving around workstations located in systems of different complexity. The consequence of these complex and dynamic work situations is that more than 50% of absenteeism for health reasons is attributed to musculoskeletal disorders, and there are no standard recommendations that universally apply. The results showed that these problems can be tackled by implementing participatory programs. The main conclusion of the Chilean experience is that there is a need to continue advancing from diagnostic studies to participatory interventions. At the same time, it is imperative that all new investments in plants, small or large, include considerations of relevant ergonomic concepts from the early planning stages. It is also important to increase ergonomic training within companies, including not only the managers who make major decisions but also the workers who are directly affected by the lack of ergonomics. It is expected that this description of the Chilean experience may be useful for other countries where mining is also a source of income and employment.

Remote online ergonomic assessment in the office environment as compared to face-to-face ergonomic assessment.

PubMed

Eyal, Levy; Ribak, Joseph; Badihi, Yehuda

2012-01-01

remote online ergonomic assessment in the office environment as compared to face-to-face ergonomic assessment and examination of the applicability of remote online ergonomic assessment to office workers. 40 employees from a large Israeli hi-tech company were ergonomically assessed per the University of California computer usage checklist, according to the two assessment types (face-to-face and remote). An additional Ergonomist "assessor 2" examined the credibility of the process. Research hypothesis 1 was verified: 21 out of 22 questions (95.45%) from the checklist indicated compatibility between "assessor 1" to the "Gold Standard" at an 80% level. Research hypothesis 2: examining the credibility between the assessors with regard to remote assessment. This hypothesis was partially verified, the correlation between the assessors was measured at 0.54. Research hypothesis 3: examining the extent of deviation of natural posture between distal body parts assessment (distant from the center of the body) and proximal body parts (close to the center of the body). This hypothesis was clearly verified. It has been proven that there is statistical significance between the results. The current research has proved that there is an additional method to assess musculoskeletal disorders risk factors remotely online at office environment.

Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review.

PubMed

Hermawati, Setia; Lawson, Glyn; Sutarto, Auditya Purwandini

2014-01-01

In industrially developing countries (IDC), small and medium enterprises (SMEs) account for the highest proprotion of employment. Unfortunately, the working conditions in SMEs are often very poor and expose employees to a potentially wide range of health and safety risks. This paper presents a comprehensive review of 161 articles related to ergonomics application in SMEs, using Indonesia as a case study. The aim of this paper is to investigate the extent of ergonomics application and identify areas that can be improved to promote effective ergonomics for SMEs in IDC. The most urgent issue found is the need for adopting participatory approach in contrast to the commonly implemented top-down approach. Some good practices in ergonomics application were also revealed from the review, e.g. a multidisciplinary approach, unsophisticated and low-cost solutions, and recognising the importance of productivity. The review also found that more work is still required to achieve appropriate cross-cultural adaptation of ergonomics application.

Elementary Ergonomics

ERIC Educational Resources Information Center

Grayson, Jennifer

2009-01-01

What's the number 1 threat to young students using computers today? According to Dan Odell, Microsoft's in-house ergonomist, when he asked parents this very question, "the things they were most concerned about were online predators and people taking advantage of their kids. Ergonomics was fairly far down the list." Unfortunately, that…

Ergonomic office design and aging: a quasi-experimental field study of employee reactions to an ergonomics intervention program.

PubMed

May, Douglas R; Reed, Kendra; Schwoerer, Catherine E; Potter, Paul

2004-04-01

A naturally occurring quasi-experimental longitudinal field study of 87 municipal employees using pretest and posttest measures investigated the effects of an office workstation ergonomics intervention program on employees' perceptions of their workstation characteristics, levels of persistent pain, eyestrain, and workstation satisfaction. The study examined whether reactions differed between younger and older employees. Results revealed that workstation improvements were associated with enhanced perceptions of the workstation's ergonomic qualities, less upper back pain, and greater workstation satisfaction. Among those experiencing an improvement, the perceptions of workstation ergonomic qualities increased more for younger than older employees, supporting the "impressionable years" framework in the psychological literature on aging. Implications for human resources managers are discussed.

World War II and other historical influences on the formation of the Ergonomics Research Society.

PubMed

Waterson, Patrick

2011-12-01

Little has been written about wartime ergonomics and the role this played in prompting the need for a society dedicated to ergonomics within the UK, namely the formation of the Ergonomics Research Society (ERS) in early 1950. This article aims to fill this gap in our understanding of the history of ergonomics in the UK and provide further details of the types of research undertaken by wartime research groups and committees such as the Institute of Aviation Medicine, Medical Research Council Applied Psychology Unit and the Flying Personnel Research Committee. In addition, the role of societal developments such as wartime links with the USA, the post-war drive to increase productivity and collaboration with industry and the recommendations of government committees in stimulating the work of the ERS are described in detail. This article also offers some reflection on present-day ergonomics in the UK and how this contrasts with the past. STATEMENT OF RELEVANCE: This article will provide practitioners with a historical perspective on the development of ergonomics from its roots in the Second World War. These developments shed light on current trends and challenges within the discipline as a whole.

Fitting methods to paradigms: are ergonomics methods fit for systems thinking?

PubMed

Salmon, Paul M; Walker, Guy H; M Read, Gemma J; Goode, Natassia; Stanton, Neville A

2017-02-01

The issues being tackled within ergonomics problem spaces are shifting. Although existing paradigms appear relevant for modern day systems, it is worth questioning whether our methods are. This paper asks whether the complexities of systems thinking, a currently ubiquitous ergonomics paradigm, are outpacing the capabilities of our methodological toolkit. This is achieved through examining the contemporary ergonomics problem space and the extent to which ergonomics methods can meet the challenges posed. Specifically, five key areas within the ergonomics paradigm of systems thinking are focused on: normal performance as a cause of accidents, accident prediction, system migration, systems concepts and ergonomics in design. The methods available for pursuing each line of inquiry are discussed, along with their ability to respond to key requirements. In doing so, a series of new methodological requirements and capabilities are identified. It is argued that further methodological development is required to provide researchers and practitioners with appropriate tools to explore both contemporary and future problems. Practitioner Summary: Ergonomics methods are the cornerstone of our discipline. This paper examines whether our current methodological toolkit is fit for purpose given the changing nature of ergonomics problems. The findings provide key research and practice requirements for methodological development.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial

PubMed Central

2014-01-01

Background More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. Methods/Design The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. Discussion The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance

Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

PubMed Central

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

Develop and Manufacture an Ergonomically Sound Glovebox Glove Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawton, Cindy M.

Ergonomic injury and radiation exposure are two safety concerns for the Plutonium Facility at Los Alamos National Laboratory (LANL). This facility employs the largest number of gloveboxes (GB) at LANL with approximately 6000 gloves installed. The current GB glove design dates back to the 1960’s and is not based on true hand anatomy, revealing several issues: short fingers, inappropriate length from the wrist to finger webbing, nonexistent joint angles and incorrect thumb placement. These design flaws are directly related to elbow (lateral epicondylitis) and thumb (DeQuervain’s tenosynovitis) injuries. The current design also contributes to increased wear on the glove, causingmore » unplanned glove openings (failures) which places workers at risk of exposure. An improved glovebox glove design has three significant benefits: 1) it will reduce the risk of injury, 2) it will improve comfort and productivity, and 3) it will reduce the risk of a glovebox failures. The combination of these three benefits has estimated savings of several million dollars. The new glove design incorporated the varied physical attributes of workers ranging from the 5 th percentile female to the 95th percentile male. Anthropometric hand dimensions along with current GB worker dimensions were used to develop the most comprehensive design specifications for the new glove. Collaboration with orthopedic hand surgeons also provided major contributtions to the design. The new glovebox glove was developed and manufactured incorporating over forty dimensions producing the most comprehensive ergonomically sound design. The new design received a LANL patent (patent attorney docket No: LANS 36USD1 “Protective Glove”, one of 20 highest patents awarded by the Richard P. Feynman Center for Innovation. The glove dimensions were inputed into a solid works model which was used to produce molds. The molds were then shipped to a glove manufacturer for production of the new glovebox gloves. The new

Ten years of experience from interactive ergonomics projects.

PubMed

Eklund, J; Karltun, J

2012-01-01

This paper highlights experiences from ergonomics projects, applying an interactive research approach. The aim of this paper is to summarise experiences from seven interactive ergonomics projects with the aim to improve ergonomics and organizational performance jointly. Results from these seven projects were analysed with a model for assessing sustainable change, including the factors active ownership, professional management, competent project leadership, and involved participants. All factors were found giving support to impact and sustainability of the change projects. However, the role of the researcher is difficult and demanding.

Ergonomic aspects of a virtual environment.

PubMed

Ahasan, M R; Väyrynen, S

1999-01-01

A virtual environment is an interactive graphic system mediated through computer technology that allows a certain level of reality or a sense of presence to access virtual information. To create reality in a virtual environment, ergonomics issues are explored in this paper, aiming to develop the design of presentation formats with related information, that is possible to attain and to maintain user-friendly application.

Development of an ergonomics device for maintenance of hydraulic generators of Tucuruí hydropower plant.

PubMed

Batista, I C; Gomes, G J C; Teles, C S; Oliveira, P F; Santos, R M; Sassi, A C; Sá, B; V, B; Pardauil, A A

2012-01-01

This paper aims to present an ergonomic device to assist in the maintenance of the units of Tucuruí Hydropower Plant. The development of this ergonomic device made possible to reduce maintenance time, reduce losses caused by billing, improve performance and reduce the physical strain for labors during the execution of services.

The struturing of an Ergonomics Program as a Center of Occupational Health Component in a public health institution.

PubMed

Lugão, Suzana S M; Ricart, Simone L S I; Pinheiro, Renata M S; Gonçalves, Waldney M

2012-01-01

This article presents the description and discussion of a pilot project in an ergonomic action developed in a public health institution. This project involves the implantation of an Ergonomics Program (PROERGO) in a department of this institution, guided by a methodology structured on six stages, referenced in the literature by ergonomics authors. The methodology includes the training of workers and the formation of facilitators and multipliers of the ergonomics actions, aiming to the implementation of a cyclical process of actions and the consolidation of an ergonomics culture in the organization. Starting from the results of this experiment we intend to replicate this program model in other departments of the institution and to propose the methodology applied as a strategy of intervention to Occupational Health area.

Quality assurance and ergonomics in the mammography department.

PubMed

Reynolds, April

2014-01-01

Quality assurance (QA) in mammography is a system of checks that helps ensure the proper functioning of imaging equipment and processes. Ergonomics is a scientific approach to arranging the work environment to reduce the risk of work-related injuries while increasing staff productivity and job satisfaction. This article reviews both QA and ergonomics in mammography and explains how they work together to create a safe and healthy environment for radiologic technologists and their patients. QA and quality control requirements in mammography are discussed, along with ergonomic best practices in the mammography setting.

Toward a transdisciplinary approach of ergonomic design for sustainability.

PubMed

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

Removal of simulated biofilm: a preclinical ergonomic comparison of instruments and operators.

PubMed

Graetz, Christian; Plaumann, Anna; Rauschenbach, Sebastian; Bielfeldt, Jule; Dörfer, Christof E; Schwendicke, Falk

2016-07-01

Periodontal scaling might cause musculoskeletal disorders, and scaling instruments might not only have different effectiveness and efficiency but also differ in their ergonomic properties. The present study assessed ergonomic working patterns of experienced (EO) and less experienced operators (LO) when using hand and powered devices for periodontal scaling and root planning. In an experimental study using periodontally affected manikins, sonic (AIR), ultrasonic (TIG) and hand instruments (GRA) were used by 11 operators (7 EO/4 LO) during simulated supportive periodontal therapy. Using an electronic motion monitoring system, we objectively assessed the working frequency and positioning of hand, neck and head. Operators' subjective evaluation of the instruments was recorded using a questionnaire. Hand instruments were used with the lowest frequency (2.57 ± 1.08 s(-1)) but greatest wrist deviation (59.57 ± 53.94°). EO used instruments more specifically than LO, and generally worked more ergonomically, with less inclination of head and neck in both the frontal and sagittal planes, especially when using hand instruments. All groups found hand instruments more tiring and difficult to use than powered instruments. Regardless of operators' experience, powered instruments were used more ergonomically and were subjectively preferred compared to hand instruments. The use of hand instruments has potential ergonomic disadvantages. However, with increasing experience, operators are able to recognise and mitigate possible risks.

A trend analysis of ergonomic research themes in Taiwan.

PubMed

Lin, Chih-Long

2015-01-01

This paper examines the development of ergonomics in Taiwan by analysing 1404 scientific articles published by 113 permanent members of the Ergonomics Society of Taiwan (EST). Each article was classified by key words and abstract content. Each article was also coded by period of publication (1971-1992 (first period), 1993-1997 (second period), 1998-2002 (third period), 2003-2007 (fourth period), and 2008-2012 (fifth period), and against 13 topic categories. The results show that rate of publication has increased by approximately 100 articles every five years since 1993.The most popular topic was ergonomics assessment and analysis techniques in the first period, force exertion-related research in the second period, product design and evaluation in the third period, occupational safety and health in the fourth period and human-computer interface in the fifth period. Each of these is highly relevant to current contemporary issues around the world. Finally, potential areas for future ergonomics research in Taiwan are discussed. This study investigates the trends in academic papers published by members of the EST. Over time, topics have shifted from ergonomics evaluation methods to occupational safety and health, and human–computer interaction. The findings should be considered as important references for planning the future of ergonomics in Taiwan.

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

ERIC Educational Resources Information Center

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

Enhanced ergonomics approaches for product design: a user experience ecosystem perspective and case studies.

PubMed

Xu, Wei

2014-01-01

This paper first discusses the major inefficiencies faced in current human factors and ergonomics (HFE) approaches: (1) delivering an optimal end-to-end user experience (UX) to users of a solution across its solution lifecycle stages; (2) strategically influencing the product business and technology capability roadmaps from a UX perspective and (3) proactively identifying new market opportunities and influencing the platform architecture capabilities on which the UX of end products relies. In response to these challenges, three case studies are presented to demonstrate how enhanced ergonomics design approaches have effectively addressed the challenges faced in current HFE approaches. Then, the enhanced ergonomics design approaches are conceptualised by a user-experience ecosystem (UXE) framework, from a UX ecosystem perspective. Finally, evidence supporting the UXE, the advantage and the formalised process for executing UXE and methodological considerations are discussed. Practitioner Summary: This paper presents enhanced ergonomics approaches to product design via three case studies to effectively address current HFE challenges by leveraging a systematic end-to-end UX approach, UX roadmaps and emerging UX associated with prioritised user needs and usages. Thus, HFE professionals can be more strategic, creative and influential.

Big data and ergonomics methods: A new paradigm for tackling strategic transport safety risks.

PubMed

Walker, Guy; Strathie, Ailsa

2016-03-01

Big data collected from On-Train Data Recorders (OTDR) has the potential to address the most important strategic risks currently faced by rail operators and authorities worldwide. These risk issues are increasingly orientated around human performance and have proven resistant to existing approaches. This paper presents a number of proof of concept demonstrations to show that long standing ergonomics methods can be driven from big data, and succeed in providing insight into human performance in a novel way. Over 300 ergonomics methods were reviewed and a smaller sub-set selected for proof-of-concept development using real on-train recorder data. From this are derived nine candidate Human Factors Leading Indicators which map on to all of the psychological precursors of the identified risks. This approach has the potential to make use of a significantly underused source of data, and enable rail industry stakeholders to intervene sooner to address human performance issues that, via the methods presented in this paper, are clearly manifest in on-train data recordings. The intersection of psychological knowledge, ergonomics methods and big data creates an important new framework for driving new insights. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic evaluation of workload by milk production - a bibliometric analysis.

PubMed

de Oliveira, Claudilaine Caldas; Pereira Moro, Antônio Renato; Ulbricht, Leandra; Belinelli, Marjorie; de Souza, Gilberto F M; Gabriel, Michele; Zattar, Izabel Cristina

2017-09-21

The purpose of this study was to select in a structured manner the relevant articles with scientific recognition, and simultaneously identify the characteristics of these publications that may scientifically enrich the theme in a portfolio of papers. The theme involves ergonomics in milk production as a criterion for evaluating and improving organizational performance in the milking sector. The study used ProKnow-C as a theoretical instrument for intervention. The main results show: i) a bibliographic portfolio of 18 items aligned with the view adopted by researchers which served as a theoretical framework for this research; ii) The article entitled "Wrist positions and movements as possible risk factors during machine milking", by Marianne Stål, Gert-Åke Hansson and Ulrich Moritz in 1999 and published in the Journal of Applied Ergonomics presented the highest scientific recognition, iii) the authors highlighted in the bibliographic portfolio or in its references researching the subject are Gert-Åke Hansson, Marianne Stål and Stefan Pinzke, and iv) the International Journal of Industrial Ergonomics shows the highest number of scientific articles in the bibliographic portfolio. The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

Ergonomics analyses of five joineries located in Florianópolis-SC, using the LEST Method.

PubMed

Vergara, Lizandra Lupi Garcia; Garcia, Carolina Schwinden; Miranda, Felipe Vergara

2012-01-01

Considering the goal of Ergonomic Work Analysis to establish, from the point of view of workers, safe, healthy, comfortable and efficient environments, this study propose to analyze the work situation of machine operators at five joineries from Florianópolis-SC. For this, it was applied the LEST Method to evaluate the task made by the operators, considering the physical, cognitive and organizational work environment. As results, it was identified the main ergonomics problems of these workstations, presenting an ergonomic diagnosis and their implications on health and safety of workers. As result, it was concluded that the main ergonomics problems at joineries are related with noise, with constant load of weight and with the postures taken. Besides these problems, others were diagnosed, for example, the pressure for workers to comply strictly the task stipulated and also the poor training and capacity of workers.

Successful integration of ergonomics into continuous improvement initiatives.

PubMed

Monroe, Kimberly; Fick, Faye; Joshi, Madina

2012-01-01

Process improvement initiatives are receiving renewed attention by large corporations as they attempt to reduce manufacturing costs and stay competitive in the global marketplace. These initiatives include 5S, Six Sigma, and Lean. These programs often take up a large amount of available time and budget resources. More often than not, existing ergonomics processes are considered separate initiatives by upper management and struggle to gain a seat at the table. To effectively maintain their programs, ergonomics program managers need to overcome those obstacles and demonstrate how ergonomics initiatives are a natural fit with continuous improvement philosophies.

Ergonomic intervention for employed persons with rheumatic conditions.

PubMed

Allaire, Saralynn J; Backman, Catherine L; Alheresh, Rawan; Baker, Nancy A

2013-01-01

Prior articles in this series on employment and arthritis have documented the major impact arthritis and other rheumatic conditions have on employment. As expected, physically demanding job tasks, including hand use, are substantial risk factors for work limitation. Computer use has been increasing. People with arthritis may choose occupations involving extensive computer use to avoid occupations with other physical demands. But studies show many people with arthritis conditions have difficulty using computers.Ergonomic assessment and implementation helps relieve the physical and other demands of jobs. The Ergonomic Assessment Tool for Arthritis (EATA) is specifically for people with arthritis conditions. Since the EATA can be conducted off worksite, it is feasible to use with workers not wishing to disclose their condition to their employer. Available research supports the effectiveness of ergonomic intervention as a viable method to reduce work limitation for persons with arthritis. Some workers will need additional vocational intervention to remain employed long term. However, ergonomic intervention is a useful first step, as it promotes awareness of arthritis effects on work activities. Assisting workers with arthritis or other rheumatic conditions to use ergonomics to enhance their ability to work well should be an important aspect of managing these conditions.

[Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

PubMed

Guo, M J; Liu, J J; Yao, H Y

2016-08-10

Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

Evolutionary adaptations: theoretical and practical implications for visual ergonomics.

PubMed

Fostervold, Knut Inge; Watten, Reidulf G; Volden, Frode

2014-01-01

The literature discussing visual ergonomics often mention that human vision is adapted to light emitted by the sun. However, theoretical and practical implications of this viewpoint is seldom discussed or taken into account. The paper discusses some of the main theoretical implications of an evolutionary approach to visual ergonomics. Based on interactional theory and ideas from ecological psychology an evolutionary stress model is proposed as a theoretical framework for future research in ergonomics and human factors. The model stresses the importance of developing work environments that fits with our evolutionary adaptations. In accordance with evolutionary psychology, the environment of evolutionary adaptedness (EEA) and evolutionarily-novel environments (EN) are used as key concepts. Using work with visual display units (VDU) as an example, the paper discusses how this knowledge can be utilized in an ergonomic analysis of risk factors in the work environment. The paper emphasises the importance of incorporating evolutionary theory in the field of ergonomics. Further, the paper encourages scientific practices that further our understanding of any phenomena beyond the borders of traditional proximal explanations.

Knobology in use: an experimental evaluation of ergonomics recommendations.

PubMed

Overgård, Kjell Ivar; Fostervold, Knut Inge; Bjelland, Hans Vanhauwaert; Hoff, Thomas

2007-05-01

The scientific basis for ergonomics recommendations for controls has usually not been related to active goal-directed use. The present experiment tests how different knob sizes and torques affect operator performance. The task employed is to control a pointer by the use of a control knob, and is as such an experimentally defined goal-directed task relevant to machine systems in general. Duration of use, error associated with use (overshooting of the goal area) and movement reproduction were used as performance measures. Significant differences between knob sizes were found for movement reproduction. High torques led to less overshooting as opposed to low torques. The results from duration of use showed a tendency that the differences between knob sizes were reduced from the first iteration to the second iteration. The present results indicate that the ergonomically recommended ranges of knob sizes might differently affect operator performance.

Assessing ergonomic risks of software: Development of the SEAT.

PubMed

Peres, S Camille; Mehta, Ranjana K; Ritchey, Paul

2017-03-01

Software utilizing interaction designs that require extensive dragging or clicking of icons may increase users' risks for upper extremity cumulative trauma disorders. The purpose of this research is to develop a Self-report Ergonomic Assessment Tool (SEAT) for assessing the risks of software interaction designs and facilitate mitigation of those risks. A 28-item self-report measure was developed by combining and modifying items from existing industrial ergonomic tools. Data were collected from 166 participants after they completed four different tasks that varied by method of input (touch or keyboard and mouse) and type of task (selecting or typing). Principal component analysis found distinct factors associated with stress (i.e., demands) and strain (i.e., response). Repeated measures analyses of variance showed that participants could discriminate the different strain induced by the input methods and tasks. However, participants' ability to discriminate between the stressors associated with that strain was mixed. Further validation of the SEAT is necessary but these results indicate that the SEAT may be a viable method of assessing ergonomics risks presented by software design. Copyright © 2016 Elsevier Ltd. All rights reserved.

The FITS model office ergonomics program: a model for best practice.

PubMed

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

Ergonomic considerations in school environments - the need for widening the scope.

PubMed

Jayaratne, Kapila

2012-01-01

Behaviour patterns specific to children pose them at greater risk of environmental hazards than adults. Ergonomics is the science of matching human interaction with the proximate environment. Conventionally ergonomic principles were applied on adult work places to ensure safety of the working environment. With emerging scientific evidence, school environments are being a focus to apply ergonomic principles. Children spend more time within schools during critical developmental stages of their life. Everybody feels that the schools are safe places, but they are not. A multitude of ergonomic hazards have been identified in school settings. Widespread mismatches between anthropometry and school furniture, heavy schoolbag carriage and unhealthy bag behaviour are significant. Negative effects range from general tiredness, musculoskeletal pains, spinal deviations, shoulder level shifts, injuries and psychological disturbances. There are fragmented efforts to widen ergonomic concepts to health care professionals and other stakeholders of child health. Addressing ergonomic issues will ensure that children, the future productive generation contributing to economic growth and development of a country, are provided with opportunities in a healthy environment. This paper emphasizes the need for a concerted effort on widening the scope of ergonomics to cater for the evolving demand.

Workplace ergonomics in lean production environments: A literature review.

PubMed

Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

2015-01-01

Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

A case study on implementing lean ergonomic manufacturing systems (LEMS) in an automobile industry

NASA Astrophysics Data System (ADS)

Srinivasa Rao, P.; Niraj, Malay

2016-09-01

Lean manufacturing is a business strategy developed in Japan. In the present scenario, the global market is developing new techniques for getting more and more production rate with a good quality under low cost. In this context, human factors have to be given importance to their working conditions. The study demonstrates the adoption of ergonomic conditions in lean manufacturing for the improvement of organizational performance of the industry. The aim of ergonomics is to adapt the new techniques to their work in efficient and safe ways in order to optimize the human health conditions and increasing the production rate. By conducting survey on various disciplines and showed how the production rate and human ergonomic conditions is affected.

Colour, vision and ergonomics.

PubMed

Pinheiro, Cristina; da Silva, Fernando Moreira

2012-01-01

This paper is based on a research project - Visual Communication and Inclusive Design-Colour, Legibility and Aged Vision, developed at the Faculty of Architecture of Lisbon. The research has the aim of determining specific design principles to be applied to visual communication design (printed) objects, in order to be easily read and perceived by all. This study target group was composed by a selection of socially active individuals, between 55 and 80 years, and we used cultural events posters as objects of study and observation. The main objective is to overlap the study of areas such as colour, vision, older people's colour vision, ergonomics, chromatic contrasts, typography and legibility. In the end we will produce a manual with guidelines and information to apply scientific knowledge into the communication design projectual practice. Within the normal aging process, visual functions gradually decline; the quality of vision worsens, colour vision and contrast sensitivity are also affected. As people's needs change along with age, design should help people and communities, and improve life quality in the present. Applying principles of visually accessible design and ergonomics, the printed design objects, (or interior spaces, urban environments, products, signage and all kinds of visually information) will be effective, easier on everyone's eyes not only for visually impaired people but also for all of us as we age.

Implementation of ergonomics in a service unit: challenges and advances.

PubMed

Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

2012-01-01

This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

Economic evaluation of a participatory ergonomics intervention in a textile plant.

PubMed

Tompa, Emile; Dolinschi, Roman; Natale, Julianne

2013-05-01

In this study we report on the economic evaluation of a participatory ergonomics process undertaken at a clothing manufacturer in Southwestern Ontario, Canada that employs approximately 300 workers. We undertake a cost-benefit analysis from the company perspective. Intervention costs amounted to $65,787 and intervention benefits $360,614 (2011 Canadian dollars). The net present value was $294,827, suggesting that the intervention was worth undertaking based on the costs and consequences over the measurement period spanning more than four years. Based on these costs and benefits, the benefit-to-cost ratio is 5.5. Overall, the findings from this study suggest that participatory ergonomics interventions can be cost beneficial from the company perspective. Even though the changes were typically low-cost and low-tech interventions implemented by the plant mechanics and maintenance personnel, benefits were realized on both the health and financial fronts. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Reducing musculoskeletal discomfort: effects of an office ergonomics workplace and training intervention.

PubMed

Robertson, Michelle M; O'Neill, Michael J

2003-01-01

Effects of an office ergonomics workplace and training intervention on workers' knowledge and self-reported musculoskeletal pain and discomfort were investigated. An instructional systems design process was used to develop an office ergonomics training program and the evaluation tools used to measure the effectiveness of the training program on workers' office ergonomics knowledge and skills. It was hypothesized that the training and workplace intervention would allow the worker to more effectively use their workplace through increased office ergonomics knowledge and skills. Following the intervention, there was a significant increase in workers' office ergonomics knowledge and awareness. Self-reported work-related musculoskeletal disorders significantly decreased for the group who had a workplace change and received ergonomic training relative to a workplace change-only group and a no intervention control group.

Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery.

PubMed

Sancibrian, Ramon; Gutierrez-Diez, María C; Torre-Ferrero, Carlos; Benito-Gonzalez, Maria A; Redondo-Figuero, Carlos; Manuel-Palazuelos, Jose C

2014-05-01

Laparoscopic surgery techniques have been demonstrated to provide massive benefits to patients. However, surgeons are subjected to hardworking conditions because of the poor ergonomic design of the instruments. In this article, a new ergonomic handle design is presented. This handle is designed using ergonomic principles, trying to provide both more intuitive manipulation of the instrument and a shape that reduces the high-pressure zones in the contact with the surgeon's hand. The ergonomic characteristics of the new handle were evaluated using objective and subjective studies. The experimental evaluation was performed using 28 volunteers by means of the comparison of the new handle with the ring-handle (RH) concept in an instrument available on the market. The volunteers' muscle activation and motions of the hand, wrist, and arm were studied while they performed different tasks. The data measured in the experiment include electromyography and goniometry values. The results obtained from the subjective analysis reveal that most volunteers (64%) preferred the new prototype to the RH, reporting less pain and less difficulty to complete the tasks. The results from the objective study reveal that the hyperflexion of the wrist required for the manipulation of the instrument is strongly reduced. The new ergonomic handle not only provides important ergonomic advantages but also improves the efficiency when completing the tasks. Compared with RH instruments, the new prototype reduced the high-pressure areas and the extreme motions of the wrist. Copyright © 2014 Elsevier Inc. All rights reserved.

Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

PubMed

Smith, Michael J; Bayehi, Antoinette Derjani

2003-01-15

This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

Ergonomic deficits in robotic gynecologic oncology surgery: a need for intervention.

PubMed

Craven, Renatta; Franasiak, Jason; Mosaly, Prithima; Gehrig, Paola A

2013-01-01

To evaluate surgeon strain using validated ergonomic assessment tools. Observational study (Canadian Task Force classification III). Academic medical center. Robotic surgeons performing gynecologic oncology surgical procedures. Videotape footage of surgeons performing robotic gynecologic oncology procedures was obtained. A human factors engineer experienced with health care ergonomics analyzed the video recordings and performed ergonomic evaluations of the surgeons. An initial evaluation was conducted using the Rapid Upper Limb Assessment (RULA) survey, an ergonomic assessment and prioritization method for determining posture, force, and frequency concerns with focus on the upper limbs. A more detailed analysis followed using the Strain Index (SI) method, which uses multiplicative interactions to identify jobs that are potentially hazardous. Seventeen hours of video recordings were analyzed, and descriptive data based on RULA/SI analysis were collected. Ergonomic evaluation of surgeon activity resulted in a mean RULA score of 6.46 (maximum possible RULA score, 7), indicating a need for further investigation. The mean SI grand score was 24.34. SI scores >10 suggest a potential for hazard to the operator. Thus, the current use of the surgical robot is potentially dangerous with regards to ergonomic positioning and should be modified. At a high-volume robotics center, there are ergonomics deficits that are hazardous to gynecologic surgeons and suggest the need for modification and intervention. A training strategy must be developed to address these ergonomic issues and knowledge deficiencies. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

The ergonomics/human factors approach to health sciences libraries.

PubMed Central

Bube, J L

1985-01-01

A review of the literature reveals scant information on the application of ergonomics to health sciences libraries. Ergonomics research has identified and validated many genuine health hazards in business offices and industrial settings. While appearing innocuous, the library environment is affected by these hazards. As sophisticated technology and machinery are introduced into libraries, the human factors must be considered. This paper examines the hazards of the library environment as identified through ergonomics research and makes recommendations for alleviating or eliminating these dangers. PMID:3161572

Ergonomics research methods

NASA Technical Reports Server (NTRS)

Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

1973-01-01

Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

Avoid Workplace Injury through Ergonomics | Poster

Cancer.gov

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases productivity, and decreases the number and severity of work-related musculoskeletal disorders (MSDs). MSDs affect the muscles, nerves, and tendons, and are a leading cause of lost workdays due to injury or illness.

Ergonomics Climate Assessment: A measure of operational performance and employee well-being.

PubMed

Hoffmeister, Krista; Gibbons, Alyssa; Schwatka, Natalie; Rosecrance, John

2015-09-01

Ergonomics interventions have the potential to improve operational performance and employee well-being. We introduce a framework for ergonomics climate, the extent to which an organization emphasizes and supports the design and modification of work to maximize both performance and well-being outcomes. We assessed ergonomics climate at a large manufacturing facility twice during a two-year period. When the organization used ergonomics to promote performance and well-being equally, and at a high level, employees reported less work-related pain. A larger discrepancy between measures of operational performance and employee well-being was associated with increased reports of work-related pain. The direction of this discrepancy was not significantly related to work-related pain, such that it didn't matter which facet was valued more. The Ergonomics Climate Assessment can provide companies with a baseline assessment of the overall value placed on ergonomics and help prioritize areas for improving operational performance and employee well-being. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Participatory ergonomics among female cashiers from a department store.

PubMed

Cristancho, María Yanire León

2012-01-01

The objective of this paper was to control ergonomic risks among female cashiers working in a department store belonging to the retail market. This study was conducted between May and November 2010. Participatory ergonomics was applied through knowing and understanding how the company works, establishing the work team (Ergo group), training the team in ergonomics-related topics, and making decisions and interventions. The sample was composed of 71 participants--mostly female cashiers--, and all of them have a musculoskeletal compromise, declaring pain or discomfort mainly in the neck, lower back, right wrist and shoulders. Among others, following problems were found: postural overload, repetitive work, manual load handling, mental fatigue, environmental discomfort, variable work schedules, extended working days, and absence of breaks. In the intervention, the main implemented changes were the redesign of workstation, complete change of chairs and keyboards, and the implementation of a rotation system, as well breaks for compensatory exercises. After that, an evident improvement of found problems was observed, therefore it can be concluded that participatory ergonomics is an attractive methodology, appropriate and efficient for solving and controlling ergonomic risks and problems.

Optimization of healthcare supply chain in context of macro-ergonomics factors by a unique mathematical programming approach.

PubMed

Azadeh, A; Motevali Haghighi, S; Gaeini, Z; Shabanpour, N

2016-07-01

This study presents an integrated approach for analyzing the impact of macro-ergonomics factors in healthcare supply chain (HCSC) by data envelopment analysis (DEA). The case of this study is the supply chain (SC) of a real hospital. Thus, healthcare standards and macro-ergonomics factors are considered to be modeled by the mathematical programming approach. Over 28 subsidiary SC divisions with parallel missions and objectives are evaluated by analyzing inputs and outputs through DEA. Each division in this HCSC is considered as decision making unit (DMU). This approach can analyze the impact of macro-ergonomics factors on supply chain management (SCM) in healthcare sector. Also, this method ranks the relevant performance efficiencies of each HCSC. In this study by using proposed method, the most effective macro-ergonomics factor on HCSC is identified as "teamwork" issue. Also, this study would help managers to identify the areas of weaknesses in their SCM system and set improvement target plan for the related SCM system in healthcare industry. To the best of our knowledge, this is the first study for macro-ergonomics optimization of HCSC. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

A study on the ergonomic assessment in the workplace

NASA Astrophysics Data System (ADS)

Tee, Kian Sek; Low, Eugene; Saim, Hashim; Zakaria, Wan Nurshazwani Wan; Khialdin, Safinaz Binti Mohd; Isa, Hazlita; Awad, M. I.; Soon, Chin Fhong

2017-09-01

Ergonomics has gained attention and take into consideration by the workers in the different fields of works recently. It has given a huge impact on the workers comfort which directly affects the work efficiency and productivity. The workers have claimed to suffer from the painful postures and injuries in their workplace. Musculoskeletal disorders (MSDs) is the most common problem frequently reported by the workers. This problem occurs due to the lack of knowledge and alertness from the workers to the ergonomic in their surroundings. This paper intends to review the approaches and instruments used by the previous works of the researchers in the evaluation of the ergonomics. The two main assessment methods often used for ergonomic evaluation are Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). Popular devices are Inertial Measurement Units (IMU) and Microsoft Kinect.

Integrating ergonomics into engineering design: the role of objects.

PubMed

Hall-Andersen, Lene Bjerg; Broberg, Ole

2014-05-01

The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between different knowledge domains, while the aim of an intermediary object is to circulate knowledge and thus produce a distant effect. Adjustable layout drawings served as boundary objects and had a positive impact on the dialog between an ergonomist and designers. An ergonomic guideline document was identified as an intermediary object. However, when the ergonomic guidelines were circulated in the design process, only some of the guidelines were transferred to the design of the sterile processing plant. Based on these findings, recommendations for working with objects in design processes are included. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

PubMed

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

Process and implementation of participatory ergonomic interventions: a systematic review.

PubMed

van Eerd, Dwayne; Cole, Donald; Irvin, Emma; Mahood, Quenby; Keown, Kiera; Theberge, Nancy; Village, Judy; St Vincent, Marie; Cullen, Kim

2010-10-01

Participatory ergonomic (PE) interventions may vary in implementation. A systematic review was done to determine the evidence regarding context, barriers and facilitators to the implementation of participatory ergonomic interventions in workplaces. In total, 17 electronic databases were searched. Data on PE process and implementation were extracted from documents meeting content and quality criteria and synthesised. The search yielded 2151 references. Of these, 190 documents were relevant and 52 met content and quality criteria. Different ergonomic teams were described in the documents as were the type, duration and content of ergonomic training. PE interventions tended to focus on physical and work process changes and report positive impacts. Resources, programme support, ergonomic training, organisational training and communication were the most often noted facilitators or barriers. Successful PE interventions require the right people to be involved, appropriate ergonomic training and clear responsibilities. Addressing key facilitators and barriers such as programme support, resources, and communication is paramount. STATEMENT OF RELEVANCE: A recent systematic review has suggested that PE has some effect on reducing symptoms, lost days of work and claims. Systematic reviews of effectiveness provide practitioners with the desire to implement but do not provide clear information about how. This article reviews the literature on process and implementation of PE.

An assessment system for rating scientific journals in the field of ergonomics and human factors.

PubMed

Dul, Jan; Karwowski, Waldemar

2004-05-01

A method for selecting and rating scientific and professional journals representing the discipline of ergonomics and human factors is proposed. The method is based upon the journal list, impact factors and citations provided by the Institute of Scientific Information (ISI), and the journal list published in the Ergonomics Abstracts. Three groups of journals were distinguished. The 'ergonomics journals' focus exclusively on ergonomics and human factors. The 'related journals' focus on other disciplines than ergonomics and human factors, but regularly publish ergonomics/human factors papers. The 'basic journals' focus on other technical, medical or social sciences than ergonomics, but are important for the development of ergonomics/human factors. Journal quality was rated using a maximum of four categories: top quality (A-level), high quality (B-level), good quality (C-level)) and professional (P-level). The above methods were applied to develop the Ergonomics Journal List 2004. A total of 25 'ergonomics journals', 58 'related journals' and 142 'basic journals' were classified.

Evaluating the ergonomics of a student learning environment.

PubMed

Rudolf, Michelle; Griffiths, Yolanda

2009-01-01

Ergonomics is a key consideration of a student-learning environment. This paper examines aspects of ergonomics and application to the design of tables in three classrooms at a Midwestern university. Custom tables with power outlets and Internet access via Ethernet data ports were planned for classrooms in 2000 to facilitate a laptop program. However, table height, specifically thigh clearance from the seat to the bottom of the work surface, was not fully considered. The ergonomic analysis of the classrooms by an occupational therapy student led to the implementation of positive changes to the tables. The enhancement of the learning environment influences student comfort and productivity and can offset the cost of renovating the tables.

[Nursing work and ergonomics].

PubMed

Marziale, M H; Robazzi, M L

2000-12-01

This text articulates empirical evidence resulting from scientific work with the intention of providing a reflection about the application of ergonomics as a methodological instrument to support improvement of the labor conditions of nursing personnel in hospitals.

Corporate ergonomics programme at BCM Airdrie. Boots Contract Manufacturing.

PubMed

Smyth, Joanne

2003-01-01

The production processes at the BCM Airdrie site range from manual loading tasks in the manufacturing areas to high frequency packaging assembly tasks on the production lines. Both are jobs that are known to carry risk to musculoskeletal health, so an ergonomist was appointed to design and co-ordinate an ergonomics programme for the site to control these risks. This paper details the programme that has evolved to proactively manage musculoskeletal risks in the design of both new and existing equipment and processes. The ergonomics procedures described primarily involve the engineers from all areas of the factory, and the process for ergonomics involvement with engineering design projects is described. Shop-floor personnel involvement is considered to be an essential part of the programme and 'Ergonomics Champions' are being trained on the packing lines to monitor the risks that are sometimes introduced with the different designs of product packaging.

Comparative ergonomic assessment of manual wheelchairs by paraplegic users.

PubMed

Gil-Agudo, Angel; Solís-Mozos, Marta; del-Ama, Antonio J; Crespo-Ruiz, Beatriz; de la Peña-González, Ana Isabel; Pérez-Nombela, Soraya

2013-07-01

The aim of the present study was to describe and test the reliability of a comprehensive product-centered approach to assessing functional performance and wheelchair user perceptions on device ergonomics and satisfaction of performance. A pilot study was implemented using this approach to evaluate differences among four manual wheelchairs. Six wheelchair users with complete spinal cord injury (SCI) at the thoracic level and with no previous upper limbs impairment were recruited for this study. After finishing circuit tasks, subjects were asked to complete a questionnaire about ergonomic wheelchair characteristics (manoeuvrability, stability, comfort and ease of propulsion) and satisfaction about task performance. On the other hand, objective data were recorded during user performance as the time required to complete each test, kinetic wheelchair propulsion data obtained with two SMARTWheels® and physiological parameters (heart rate and physiological index). Kuschall Champion® and Otto Bock Voyage® wheelchairs were ranked best for most ergonomic aspects specially in manoeuvrability (p < 0.05). Less time was required to execute most of the circuit tasks in both wheelchair models (p < 0.05). This approach proposed highlight the importance of looking both kinds of information, user perception and user functional performance when evaluating a wheelchair or comparing across devices.

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels.

PubMed

Pires, Paulo Roberto de Oliveira Bassil; Rezende, Fagner Fagundes

2012-01-01

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.

A case study detailing key considerations for implementing a telehealth approach to office ergonomics.

PubMed

Ritchie, Catherine L W; Miller, Linda L; Antle, David M

2017-01-01

Telehealth approaches to delivering ergonomics assessment hold great potential to improve service delivery in rural and remote settings. This case study describes a telehealth-based ergonomics service delivery process, and compares in-person and telehealth-based ergonomics approaches at an Alberta-based non-profit advocacy group. This project demonstrates that telehealth approaches to ergonomics do not lead to significantly different scoring outcomes for assessment of ergonomics issues, when compared to in-person assessments. This project also outlines the importance of live real-time video conferencing to improving communication, attaining key assessment information, and demonstrating ergonomic adjustments. However, some key considerations of bandwidth and hardware capabilities need to be taken into account. Key communication strategies are outlined to improve rapport, maintain employee confidentiality, and reduce client anxiety around telehealth ergonomics assessments. This project provides further support for telehealth approaches to office ergonomics, and outlines some key implementation strategies and barriers that should be considered.

Effectiveness of computer ergonomics interventions for an engineering company: a program evaluation.

PubMed

Goodman, Glenn; Landis, James; George, Christina; McGuire, Sheila; Shorter, Crystal; Sieminski, Michelle; Wilson, Tamika

2005-01-01

Ergonomic principles at the computer workstation may reduce the occurrence of work related injuries commonly associated with intensive computer use. A program implemented in 2001 by an occupational therapist and a physical therapist utilized these preventative measures with education about ergonomics, individualized evaluations of computer workstations, and recommendations for ergonomic and environmental changes. This study examined program outcomes and perceived effectiveness based on review of documents, interviews, and surveys of the employees and the plant manager. The program was deemed successful as shown by 59% of all therapist recommendations and 74% of ergonomic recommendations being implemented by the company, with an 85% satisfaction rate for the ergonomic interventions and an overall employee satisfaction rate of 70%. Eighty-one percent of the physical problems reported by employees were resolved to their satisfaction one year later. Successful implementation of ergonomics programs depend upon effective communication and education of the consumers, and the support, cooperation and collaboration of management and employees.

Optimizing the physical ergonomics indices for the use of partial pressure suits.

PubMed

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

SME Worker Affective (SWA) index based on environmental ergonomics

NASA Astrophysics Data System (ADS)

Ushada, M.; Kusuma Aji, G.; Okayama, T.; Khidir, M.

2018-04-01

Small-Medium sized (SME) is a focal type of Indonesian industry which contributes to national emerging economies. Indonesian goverment has developed employee social security system (BPJS Ketenagakerjaan) to support worker quality of life. However, there were limited research which could assist BPJS Ketenagakerjaan in evaluating worker quality of life. Worker quality of life could be categorized as the highest worker needs or affective states. SME Worker Affective (SWA) index is being concerned as a basic tool to make balance between worker performance and quality of life in workstation of SMEs. The research objectives are: 1) To optimize the environmental ergonomics in SMEs; 2) To quantify SME Worker Affective (SWA) index based on optimized environmental ergonomics. The research advantage is to support Indonesian goverment in monitoring SMEs good practices to its worker quality of life. Simulated annealing optimized the heart rate and environmental ergonomics parameters. SWA index was determined based on comparison between optimized heart rate and environmental ergonomics parameters. SWA index were quantified for 380 data of worker. The evaluation indicated 51.3% worker in affective and 48.7% in non-affective condition. Research results indicated that stakeholders of SMEs should put more attention on environmental ergonomics and worker affective.

Ergonomics and sustainability in the design of everyday use products.

PubMed

Tosi, Francesca

2012-01-01

The relationship between Ergonomics and Design is a key element in the sustainability project, as well as in many other areas of experimental design. In the Design for Sustainability field, Ergonomics is a strategic factor for design culture innovation, providing designers with the necessary knowledge and skills regarding human characteristics and capabilities, as well as user needs and desires during use and interaction with products in work activities and everyday life. Ergonomics is also a strategic innovative factor in design development and manufacturing processes. In fact, ergonomics provides a methodological approach in user-product interaction evaluation processes through the use of participatory design and survey methods, user trials, direct observation, savings and resource conservation, etc.On the other hand, design offers solutions able to interpret user needs and expectations, at the same time suggesting new behaviors and lifestyles.In Design for Sustainability, the ergonomic and user-centered approach contributes greatly to lifestyles and innovative use of products--making it possible to understand and interpret real people needs and expectations in their everyday actions and behavior.New consumption patterns, new awareness of lifestyles, energy source consumption, purchasing methods and consumption style etc. can be supported by design innovation, responding to expressed and unexpressed user needs. With this in mind, the ergonomic approach represents the starting point for design choices and at the same time, a tool for assessing their appropriateness and effectiveness.

Construction and application of an indicator system to assess the ergonomic performance of large and medium-sized construction companies.

PubMed

Bezerra, Isabela Xavier Barbalho; de Carvalho, Ricardo José Matos

2012-01-01

This article proposes a system of indicators to evaluate the performance of companies in ergonomics for buildings. The system was developed based primarily on studies related to the performance evaluation of the construction industry and on Brazilian standards of ergonomics and work safety and had also the contribution of national and international indicators related to ergonomics, work safety, quality, sustainability, quality of work life and to organizational behavior. The indicators were named, classified and their components were assigned to compose the theoretical model SIDECE--System of Performance Indicators in Ergonomics for Building Construction (as for the Portuguese acronym), serving the major goals of ergonomics: health, safety and workers' satisfaction and production efficiency. The SIDECE is being validated along with the building construction companies in the city of Natal, Brazil, whose practical results, deriving from the application of instruments to collect field data, are under process, to be presented on the occasion of the 18th World Congress on Ergonomics. It is intended that the SIDECE be used by building construction companies as a support tool for excellence management.

Ergonomics and workplace design: application of Ergo-UAS System in Fiat Group Automobiles.

PubMed

Vitello, M; Galante, L G; Capoccia, M; Caragnano, G

2012-01-01

Since 2008 Fiat Group Automobiles has introduced Ergo-UAS system for the balancing of production lines and to detect ergonomic issues. Ergo-UAS system integrates 2 specific methods: MTM-UAS for time measurement and EAWS as ergonomic method to evaluate biomechanical effort for each workstation. Fiat is using a software system to manage time evaluation and ergo characterization of production cycle (UAS) to perform line balancing and obtain allowance factor in all Italian car manufacturing plant. For new car models, starting from New Panda, FGA is applying Ergo-UAS for workplace design since the earliest phase of product development. This means that workplace design is based on information about new product, new layout, new work organization and is performed by a multidisciplinary team (Work Place Integration Team), focusing on several aspects of product and process: safety, quality and productivity. This allows to find and solve ergonomic threats before the start of production, by means of a strict cooperation between product development, engineering and design, manufacturing. Three examples of workstation design are presented in which application of Ergo-UAS was determinant to find out initial excessive levels of biomechanical load and helped the process designer to improve the workstations and define limits of acceptability. Technical activities (on product or on process), or organizational changes, that have been implemented in order to solve the problems are presented. A comparison between "before" and "new" ergonomic scores necessary to bring workstations in acceptable conditions were made.

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review

PubMed Central

Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

and at the end of the working day, while 61.5% of the original articles emphasized the use of modern and ergonomic instruments. Discussion This review showed that static postures are strongly responsible in the etiology of musculoskeletal disorders. The awkward postures more frequently identified among dental professionals are: extreme forward-head and neck flexion; trunk inclination and rotation towards one side; lifting one or both shoulders; increased curvature of the thoracic vertebral column; incorrect positioning of the lower limbs with thigh-leg angle of less than 90°. It is really important to use of a modern workstation with appropriate ergonomic supports. Among the preventive ergonomic measures, literature has widely recognized the role of physical activity and of a neutral and balanced posture. The present review has some limits: a large part of the selected studies did not have a high methodological quality score and an inadequate statistical analysis. PMID:29362689

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review.

PubMed

De Sio, Simone; Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

, while 61.5% of the original articles emphasized the use of modern and ergonomic instruments. This review showed that static postures are strongly responsible in the etiology of musculoskeletal disorders. The awkward postures more frequently identified among dental professionals are: extreme forward-head and neck flexion; trunk inclination and rotation towards one side; lifting one or both shoulders; increased curvature of the thoracic vertebral column; incorrect positioning of the lower limbs with thigh-leg angle of less than 90°. It is really important to use of a modern workstation with appropriate ergonomic supports. Among the preventive ergonomic measures, literature has widely recognized the role of physical activity and of a neutral and balanced posture. The present review has some limits: a large part of the selected studies did not have a high methodological quality score and an inadequate statistical analysis.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk.

PubMed

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Among 123 jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented.

Ergonomic Based Design and Survey of Elementary School Furniture

ERIC Educational Resources Information Center

Maheshwar; Jawalkar, Chandrashekhar S.

2014-01-01

This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

Ergonomics for Online Searching.

ERIC Educational Resources Information Center

Wright, Carol; Friend, Linda

1992-01-01

Describes factors to be considered in the design of ergonomically correct workstations for online searchers. Topics discussed include visual factors, including lighting; acoustical factors; radiation and visual display terminals (VDTs); screen image characteristics; static electricity; hardware and equipment; workstation configuration; chairs;…

'1966 and all that': Trends and developments in UK ergonomics during the 1960s.

PubMed

Waterson, Patrick; Eason, Ken

2009-11-01

The 1960s represents a key decade in the expansion of ergonomics within the UK. This paper reviews trends and developments that emerged out of the 1960s and compares these with ergonomics research and practice today. The focus in particular is on the expansion of ergonomics as a discipline within industry, as well as more specific topics, such as the emergence of areas of interest, for example, computers and technology, automation and systems ergonomics and consumer ergonomics. The account is illustrated with a detailed timeline of developments, a set of industrial case studies and the contents of important publications during the decade. A key aim of the paper is to provide the opportunity to reflect on the past and the implications this may have for future directions for ergonomics within the UK. The paper provides practitioners with an insight into the development of ergonomics in the UK during one of the most important decades of its history. This is especially relevant given the fact that in 2009 the Ergonomics Society celebrates its 60th anniversary.

The dentist’s operating posture – ergonomic aspects

PubMed Central

Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

2014-01-01

Abstract The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist’s physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture. PMID:25184007

Integrating ergonomics into production system development--the Volvo Powertrain case.

PubMed

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

Development of an ergonomics guideline for the furniture manufacturing industry.

PubMed

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

New ergonomic and functional design of digital conferencing rooms in a clinical environment

NASA Astrophysics Data System (ADS)

Ratib, Osman M.; Amato, Carlos L.; McGill, D. Ric; Liu, Brent J.; Balbona, Joseph A.; McCoy, J. Michael

2003-05-01

Clinical conferences and multidisciplinary medical rounds play a major role in patient management and decision-making relying on presentation of variety of documents: films, charts, videotapes, graphs etc. These conferences and clinical rounds are often carried out in conferencing rooms or department libraries that are usually not suitable for presentation of the data in electronic format. In most instances digital projection equipment is added to existing rooms without proper consideration to functional, ergonomic, acoustical, spatial and environmental requirements. Also, in large academic institutions, the conference rooms serve multiple purposes including as classrooms for teaching and education of students and for administrative meetings among managers and staff. In the migration toward a fully digital hospital we elected to analyze the functional requirements and optimize the ergonomic design of conferencing rooms that can accommodate clinical rounds, multidisciplinary reviews, seminars, formal lectures and department meetings. 3D computer simulation was used for better evaluation and analysis of spatial and ergonomic parameters and for gathering opinions and input from users on different design options. A critical component of the design is the understanding of the different workflow and requirements of different types of conferences and presentations that can be carried out in these conference rooms.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk

PubMed Central

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

Objectives This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Methods Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Results Among 123jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Conclusion Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented. PMID:24142048

Evaluation of a participatory ergonomic intervention process in kitchen work.

PubMed

Pehkonen, Irmeli; Takala, Esa-Pekka; Ketola, Ritva; Viikari-Juntura, Eira; Leino-Arjas, Päivi; Hopsu, Leila; Virtanen, Tuija; Haukka, Eija; Holtari-Leino, Merja; Nykyri, Elina; Riihimäki, Hilkka

2009-01-01

We evaluated a participatory ergonomic intervention process applied in 59 municipal kitchens. In groups of three to five kitchens, the workers participated in eight workshops, and generated and evaluated solutions to optimize musculoskeletal load in their work. An ergonomist initiated and supported the process. By the end, 402 changes were implemented. Evaluative data were collected using research diaries, questionnaires, and focus group interviews. The intervention model proved feasible and the participatory approach was mostly experienced as motivating. The workers' knowledge and awareness of ergonomics increased, which improved their ability to tackle ergonomic problems by themselves. The changes in ergonomics were perceived to decrease physical load and improve musculoskeletal health. As hindering factors for implementation, lack of time and motivation, and insufficient financial resources were mentioned. In addition, the workers expressed a wish for more support from the management, technical staff, and ergonomists.

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

This paper describes ergonomics and the need to adapt worksites and technologies for individuals with physical or sensory disabilities. It provides suggestions for how to design an appropriate setup, design considerations, environmental considerations, chairs, monitor height, ambient noise, light, and electricity. Recommendations include: (1)…

Design and Evaluation of Ergonomic Interventions for the Prevention of Musculoskeletal Disorders in India

PubMed Central

2014-01-01

Background Improper workstation, work procedures and tools are found to be the risk factors for the development of musculoskeletal disorders among the informal sector workers of the developing countries. Low cost ergonomic interventions can effectively improve such adverse conditions. Case presentation In the present article some studies related to design interventions in different informal and agricultural sectors were discussed and their efficacies were analyzed. It was observed that with the help of appropriate interventions musculoskeletal disorders were reduced, adverse physiological conditions were improved when awkward postures were corrected and ultimately the organisational productivity was increased. Conclusion Proper implementation of ergonomic interventions can ultimately improve the economy of the nation. PMID:25009740

Ergonomic evaluation of a wheelchair for transfer of disabled passengers at a large airport.

PubMed

Rohmert, W; Löwenthal, I; Rückert, A

1990-01-01

Transferring disabled passengers to the aircraft, both arriving and departing, is one passenger service at a big airport. We use different ergonomic research methods (registration of heart rate, AET job analysis as well as a standardized questionnaire) to evaluate the present wheelchair design. Due to e.g. the high wheelchair backrest, the forces needed to handle the chair and other facts, the current wheelchair causes a strain bottleneck. The results of the AET analysis and the rating of the perceived exertion confirm this finding. A redesigned wheelchair based on ergonomic principles, which reduces stress on the employees and offers more comfort to disabled passengers, is presented.

Building a framework for ergonomic research on laparoscopic instrument handles.

PubMed

Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

2016-06-01

Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Preventing Workplace Injuries and Illnesses through Ergonomics. Listening to Our Pain.

ERIC Educational Resources Information Center

Rosskam, Ellen; Baichoo, Pavan

1997-01-01

Ergonomics focuses on the prevention of injuries through proper design of equipment, workstations, and products. The adoption of an ergonomic philosophy in the workplace has demonstrable benefits. (JOW)

Work-related musculoskeletal complaints: some ergonomics challenges upon the start of a new century.

PubMed

Westgaard, R H

2000-12-01

Three themes likely to be important within health-related ergonomics in the coming years are discussed. The first two themes concern methods for risk analysis of low-level biomechanical and psychosocial exposures. The third theme is approaches to successful implementation of ergonomics interventions. Evidence on the assessment of low-level biomechanical and psychosocial exposures by instrumented measurements is discussed. It is concluded that, despite recent advances in our understanding of exposure-effect associations under these exposure conditions, we must at present rely on more subjective methods, employed in a collaboration between expert and worker. This approach to risk analysis identifies in most cases critical exposures in a work situation. The focus should then be on the successful implementation of measures against those exposures, as identification alone does not solve problems. The aim of improved health for the workers further requires that the full complement of risk factors be considered, including work, leisure time and person-based risk factors. Finally, the need to put ergonomics intervention initiatives in an organisational context is emphasised, and examples of approaches used by Norwegian companies are presented.

Cognition-based development and evaluation of ergonomic user interfaces for medical image processing and archiving systems.

PubMed

Demiris, A M; Meinzer, H P

1997-01-01

Whether or not a computerized system enhances the conditions of work in the application domain, very much demands on the user interface. Graphical user interfaces seem to attract the interest of the users but mostly ignore some basic rules of visual information processing thus leading to systems which are difficult to use, lowering productivity and increasing working stress (cognitive and work load). In this work we present some fundamental ergonomic considerations and their application to the medical image processing and archiving domain. We introduce the extensions to an existing concept needed to control and guide the development of GUIs with respect to domain specific ergonomics. The suggested concept, called Model-View-Controller Constraints (MVCC), can be used to programmatically implement ergonomic constraints, and thus has some advantages over written style guides. We conclude with the presentation of existing norms and methods to evaluate user interfaces.

Ergonomics as a missing part of sustainability.

PubMed

Pavlovic-Veselinovic, Sonja

2014-01-01

In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

Swedish Sonographers' perceptions of ergonomic problems at work and their suggestions for improvement.

PubMed

Gemark Simonsen, Jenny; Gard, Gunvor

2016-09-15

Sonographers' perceptions of ergonomic and work-related pain problems at work have so far mostly been researched in quantitative studies by questionnaires. There is a need of experience-based research to deepen the knowledge about how sonographers perceive ergonomic problems at work. Therefore, the aim of this qualitative study was to describe sonographers' perceptions of ergonomic problems at work, and their suggestions for improvement strategies. Twenty-two female sonographers were individually interviewed regarding different aspects of their physical working environment. Content analysis was applied. The sonographers perceived different ergonomic problems in their working environment, but to offer patient comfort and to obtain the best possible images were often prioritized over working posture. Echocardiography was considered demanding as the examination is performed with little variation in posture. Ergonomic improvements included reducing the manual handling of the transducer, optimizing the adjustability of equipment, and taking the patient's physique and health into account. As some examinations were perceived to be more ergonomically demanding, variation between examinations was suggested, however, this requires broader skills. Sonography, especially echocardiography is ergonomically demanding but the improvement strategies suggested were perceived useful and applicable.

Ergonomics and Literacy: More in Common Than You Think.

ERIC Educational Resources Information Center

Worden, Elizabeth

Ergonomics, or human factors, is the study of the relationship between people as functioning physical beings and the world in which they exist and this includes the textual material that they read. The presentation of textual material can be considered from two points of view: (1) the qualities of the text as impacted by the author; and (2) the…

Postural Assessment of Students Evaluating the Need of Ergonomic Seat and Magnification in Dentistry.

PubMed

Dable, Rajani A; Wasnik, Pradnya B; Yeshwante, Babita J; Musani, Smita I; Patil, Ashishkumar K; Nagmode, Sunilkumar N

2014-12-01

Dental students using conventional chairs need immediate change in their posture. Implementing an ergonomic posture is necessary as they are at high risk for developing musculoskeletal disorders. This study recommends the use of an ergonomic seat and magnification system to enhance the visibility and the posture of an operator. The aim of this study is to make a foray into the hazards caused by inappropriate posture of dental students while working. It also aims at creating a cognizance about the related health implications among the dental fraternity at large, and to understand the significance of adopting an ergonomic posture since the beginning of the professional course. In the present study, postures have been assessed by using rapid upper limb assessment (RULA). This method uses diagrams of body postures and three scoring tables to evaluate ones exposure to risk factors. Ninety students from II BDS (preclinical students in the second year of dental school) were assessed in three groups using three different seats with and without magnification system. The results recorded significantly higher RULA scores for the conventional seats without using the magnification system compared to the SSC (Salli Saddle Chair-an ergonomic seat) with the use of magnification system. A poor ergonomic posture can make the dental students get habituated to the wrong working style which might lead to MSDs (Musculoskeletal diseases). It is advisable to acclimatize to good habits at the inception of the course, to prevent MSDs later in life.

Ergonomics Contribution in Maintainability

NASA Astrophysics Data System (ADS)

Teymourian, Kiumars; Seneviratne, Dammika; Galar, Diego

2017-09-01

The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

An ergonomics approach model to prevention of occupational musculoskeletal injuries.

PubMed

Koltan, Altan

2009-01-01

The objective of this study was to prevent occupational musculoskeletal injuries. Our workers stacked boxes of ceramics weighing 10-27 kg, making low back pain common in our enterprise. In all the stacking stations, recommended weight limits (RWL) were separately calculated using the revised National Institute for Occupational Health lifting equation. Since the boxes weighed significantly more than the RWL, we developed a new ergonomic design that completely changed the stacking process. The load put on the workers' waist vertebrae in the new and the old stacking methods was compared to evaluate the success of the new ergonomic design, using Newton's third law of motion. Thanks to the new ergonomic design, the load on the workers' vertebrae decreased by 80%. Due to its simple technology and its very low cost compared to robots, the new ergonomic design can be commonly used in enterprises with repeated and constraining stacking.

Facilitators & Barriers to the Adoption of Ergonomic Solutions in Construction

PubMed Central

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Barnidge, Ellen; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Rates of musculoskeletal disorders in construction remain high. Few studies have described barriers and facilitators to the use of available ergonomic solutions. This paper describes these barriers and facilitators and their relationship to the level of adoption. Methods Three analysts rated 16 proposed ergonomic solutions from a participatory ergonomics study and assessed the level of adoption, six adoption characteristics, and identified the category of adoption from a theoretical model. Results Twelve solutions were always or intermittently used and were rated positively for characteristics of relative advantage, compatibility with existing work processes, and trialability. Locus of control (worker vs. contractor) was not related to adoption. Simple solutions faced fewer barriers to adoption than those rated as complex. Conclusions Specific adoption characteristics can help predict the use of new ergonomic solutions in construction. Adoption of complex solutions must involve multiple stakeholders, more time, and shifts in culture or work systems. PMID:28195660

Health Care Ergonomics: Contributions of Thomas Waters.

PubMed

Poole Wilson, Tiffany; Davis, Kermit G

2016-08-01

The aim of this study was to assess the contributions of Thomas Waters's work in the field of health care ergonomics and beyond. Waters's research of safe patient handling with a focus on reducing musculoskeletal disorders (MSDs) in health care workers contributed to current studies and prevention strategies. He worked with several groups to share his research and assist in developing safe patient handling guidelines and curriculum for nursing students and health care workers. The citations of articles that were published by Waters in health care ergonomics were evaluated for quality and themes of conclusions. Quality was assessed using the Mixed Methods Appraisal Tool and centrality to original research rating. Themes were documented by the type of population the citing articles were investigating. In total, 266 articles that referenced the top seven cited articles were evaluated. More than 95% of them were rated either medium or high quality. The important themes of these citing articles were as follows: (a) Safe patient handling is effective in reducing MSDs in health care workers. (b) Shift work has negative impact on nurses. (c) There is no safe way to manually lift a patient. (d) Nurse curriculums should contain safe patient handling. The research of Waters has contributed significantly to the health care ergonomics and beyond. His work, in combination with other pioneers in the field, has generated multiple initiatives, such as a standard safe patient-handling curriculum and safe patient-handling programs. © 2016, Human Factors and Ergonomics Society.

Knowledge, attitude, and practice towards ergonomics among undergraduates of Faculty of Dentistry, Tanta University, Egypt.

PubMed

El-Sallamy, Rania M; Atlam, Salwa A; Kabbash, Ibrahim; El-Fatah, Sanaa Abd; El-Flaky, Asmaa

2017-02-23

Ergonomics is the scientific study of people and their working environment. Dentistry is a profession that generally produces various musculoskeletal disorders. If ergonomic principles are applied in the field of dentistry, it helps to prevent occupational ergonomic health hazards and provides more comfort to the dentist and patient. To assess knowledge, attitudes, and practice of ergonomics during routine dental procedures among undergraduates of Faculty of Dentistry, Tanta University, cross-sectional study was conducted among dental students of Tanta University during the year 2015-2016 using a predesigned selfadministered questionnaire. Knowledge, attitude, and practice were assessed by 16, 5, and 6 questions, respectively. The study included 479 dental students, of them, 291 (60.8%) were females, 359 (74.9%) were from urban areas, and 359 students (74.9%) were 22 years old and below. Only one quarter of the students had good knowledge whereas nearly half of the students (48.9%) had fair knowledge concerning ergonomics. Out of the participants, 84.8% had positive attitudes and 95.4% had poor practice of ergonomics. Only 48.9% of the studied students had fair knowledge regarding ergonomics; also 5% only of students practice it. But about 84.8% of students have a positive attitude towards studying ergonomics. Dental students need to ensure involving ergonomics in the routine dental practice. This may be achieved via addition of ergonomics in their curriculum.

Ergonomic applications to dental practice.

PubMed

Gupta, Shipra

2011-01-01

The term "work-related musculoskeletal disorders (WMSDs)," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.

Evaluation and control of ergonomics actions in federal public service: the case of FIOCRUZ-RJ.

PubMed

Ricarta, Simone L Santa Isabel; Vidala, Mario Cesar Rodriguez; Bonfattia, Renato José

2012-01-01

This article presents information about the development of the dissertation. Deals with the production of ergonomic diagnosis in the environments and work processes of an important center of research and development in Public Health, FIOCRUZ. Critically evaluates the performance of a team promoting and facilitating the process of implementing ergonomic changes suggested. Through analysis of documents and statements by some managers and representatives of Human Resources was possible to identify the factors that facilitate and hinder the implementation process, linking them to the organization of the institution and conduct of the agents involved. Finally, it makes a reflection on practice, results and developments involved in the processes of change initiated by the ergonomic actions, proposing its replication along with other institutes of the Civilian Personnel of Federal Public Administration.

Integrating ergonomics in design processes: a case study within an engineering consultancy firm.

PubMed

Sørensen, Lene Bjerg; Broberg, Ole

2012-01-01

This paper reports on a case study within an engineering consultancy firm, where engineering designers and ergonomists were working together on the design of a new hospital sterile processing plant. The objective of the paper is to gain a better understanding of the premises for integrating ergonomics into engineering design processes and how different factors either promote or limit the integration. Based on a grounded theory approach a model illustrating these factors is developed and different hypotheses about how these factors either promote and/or limit the integration of ergonomics into design processes is presented along with the model.

A Comprehensive Approach for the Ergonomic Evaluation of 13 Emergency and Transport Ventilators.

PubMed

Marjanovic, Nicolas; L'Her, Erwan

2016-05-01

Mechanical ventilation is an important part of emergency medicine and is frequently used for transportation. Human errors during ventilator settings are frequent and may be associated with high morbidity/mortality. The aim of the study was to provide a complete ergonomic evaluation of emergency and transport ventilators, taking into account objective and subjective human-machine interface assessments and individual mental work load. We performed a prospective bench ergonomic evaluation of 13 emergency and transport ventilators, using standardized conditions and a global methodological approach. The study was performed in an evaluation laboratory dedicated to respiratory care, and 12 emergency physicians unfamiliar with the tested devices were included in the evaluation. The ventilators were classified into 3 categories (simple, sophisticated, and ICU-like). Objective chronometric evaluations were conducted considering 9 tasks, and subjective evaluations were performed (ease of use, willingness to use, and user-friendliness of monitoring) using Likert scales. Mental work load evaluation was performed using the NASA Task Load Index scale. Overall task failure rate represented 4% of all attempts. Setting modifications, ventilation mode changes, and powering down durations were different between simple and other emergency and transport ventilator categories (P < .005). There was no difference between ventilator categories for the ease of use and user-friendliness of the monitoring. In contrast, the willingness to use was lower for simple devices, compared with sophisticated and ICU-like emergency and transport ventilators (2.9 ± 1.4 vs 3.9 ± 1.2, P = .002 and 4.3 ± 1, P < .001). No differences were observed between devices regarding the mental work load, except for several specific devices in the sophisticated category. A comprehensive ergonomic evaluation provides valuable information while investigating operational friendliness in emergency and transport

Ergonomics as a tool to improve the sustainability of the workforce.

PubMed

Meyer, Felipe; Eweje, Gabriel; Tappin, David

2017-01-01

The sustainability of the workforce is threatened due to working conditions. One of the reasons for this is an imbalance between the working conditions and the capacity of the workers. The objective of the paper, based on a literature review, is to explore the relationship between two main concepts, beginning with sustainability, and finished with ergonomics. Based on that relationship, determine if ergonomics could be helpful to improve the sustainability of the workforce. Literature review was based on two keywords: sustainability and ergonomics. The focus was on create a theoretical path between these two concepts. The literature review draws on 100 journal articles, books, conference proceedings, thesis and reports. The results of the literature review highlights that an ergonomics approach is helpful and appropriate to determine the mismatch between people capacity and system demand. In that sense, the literature review reveals that both disciplines, ergonomics and sustainability, share the same principles and that the mix of both has significant potential. However, the literature also shows a lack of empirical information that proves that potential. The review first posits that sustainability principles could be helpful to improve the working conditions, and second, that an ergonomics approach provides information related with working conditions, organizations' problems and the needs of workers that would be helpful to create a sustainability workforce.

Evidence-based ergonomics: a model and conceptual structure proposal.

PubMed

Silveira, Dierci Marcio

2012-01-01

In Human Factors and Ergonomics Science (HFES), it is difficult to identify what is the best approach to tackle the workplace and systems design problems which needs to be solved, and it has been also advocated as transdisciplinary and multidisciplinary the issue of "How to solve the human factors and ergonomics problems that are identified?". The proposition on this study is to combine the theoretical approach for Sustainability Science, the Taxonomy of the Human Factors and Ergonomics (HFE) discipline and the framework for Evidence-Based Medicine in an attempt to be applied in Human Factors and Ergonomics. Applications of ontologies are known in the field of medical research and computer science. By scrutinizing the key requirements for the HFES structuring of knowledge, it was designed a reference model, First, it was identified the important requirements for HFES Concept structuring, as regarded by Meister. Second, it was developed an evidence-based ergonomics framework as a reference model composed of six levels based on these requirements. Third, it was devised a mapping tool using linguistic resources to translate human work, systems environment and the complexities inherent to their hierarchical relationships to support future development at Level 2 of the reference model and for meeting the two major challenges for HFES, namely, identifying what problems should be addressed in HFE as an Autonomous Science itself and proposing solutions by integrating concepts and methods applied in HFES for those problems.

An online learning course in Ergonomics.

PubMed

Weiss, Patrice L Tamar; Schreuer, Naomi; Jermias-Cohen, Tali; Josman, Naomi

2004-01-01

For the past two years, the Department of Occupational Therapy at the University of Haifa has offered an online course to third year occupational therapists on the topic of Ergonomics for Health Care Professionals. The development and implementation of this course was funded by the Israeli Ministry of Education. Unique teaching materials, developed and uploaded to the University's server via "High Learn", included interactive and self-directed documents containing graphics, animations, and video clips. Extensive use was made of the discussion forum and survey tools, and students submitted all assignments online. For the final topic, an expert in ergonomics from Boston University delivered a lecture via two-way videoconferencing. The course site included comprehensive library listings in which all bibliographic materials were made available online. Students accessed course materials at the University in a computer classroom and at home via modem. In an accompanying research study, the frequency of student usage of the various online tools was tracked and extensive data were collected via questionnaires documenting students' demographic background, preferred learning style, prior usage of technology, satisfaction with the course and academic achievement. This paper focuses on the results of the research study that examined how the students responded to and coped with teaching material presented and accessed in this format.

Evaluation of an ergonomics intervention among Nicaraguan coffee harvesting workers.

PubMed

Bao, Stephen; Silverstein, Barbara; Stewart, Kate

2013-01-01

This study evaluated an ergonomics intervention among Nicaraguan coffee harvesting workers, using electromyography and questionnaire survey techniques. Nicaraguan researchers were involved in the study so that they could gain hands-on experience with ergonomics research and applications, and eventually be the specialists conducting ergonomics interventions in Nicaraguan workplaces. Coffee harvesting activities were studied individually and physical hazards were identified accordingly. The results showed decreased muscle loading on the erector spinae muscle and improved comfort reporting in the back region compared to the commonly used baskets. This fulfils the design objective of a newly developed bag that was used in the intervention to reduce physical workload on the coffee harvesting workers. Workers' opinion survey results showed some issues related to the size of the new bag and the lumbar-shoulder belt mechanism. This information can be used in the modification of the bag in the next design. Key players in the process have been identified. Stimulating ergonomics activities in developing countries is suggested by many experts. This study provided an example from coffee workers in Nicaragua. Commonly used job evaluation procedures and physical load quantification methods were used. Ergonomics researchers and practitioners in developing countries may do similar projects on their own in the future.

ERGONOMICS ABSTRACTS 48983-49619.

ERIC Educational Resources Information Center

Ministry of Technology, London (England). Warren Spring Lab.

THE LITERATURE OF ERGONOMICS, OR BIOTECHNOLOGY, IS CLASSIFIED INTO 15 AREAS--METHODS, SYSTEMS OF MEN AND MACHINES, VISUAL AND AUDITORY AND OTHER INPUTS AND PROCESSES, INPUT CHANNELS, BODY MEASUREMENTS, DESIGN OF CONTROLS AND INTEGRATION WITH DISPLAYS, LAYOUT OF PANELS AND CONSOLES, DESIGN OF WORK SPACE, CLOTHING AND PERSONAL EQUIPMENT, SPECIAL…

Space Sciences Laboratory Publications and Presentations

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

1998-01-01

This document lists the significant publications and presentations of the Space Sciences Laboratory during the period January 1 - December 31, 1997. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by page number) listing preprints issued by the Laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature.

Ergonomics and quality management--humans in interaction with technology, work environment, and organization.

PubMed

Eklund, J A

1999-01-01

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate important ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elaborate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, inappropriate design of technology, and an unsuitable organization are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain support from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.

Designing an Ergonomically Correct CNC Workstation on a Shoe String Budget.

ERIC Educational Resources Information Center

Lightner, Stan

2001-01-01

Describes research to design and construct ergonomically correct work stations for Computer Numerical Control machine tools. By designing ergonomically correct work stations, industrial technology teachers help protect students from repetitive motion injuries. (Contains 12 references.) (JOW)

Expert assessment of physical ergonomics at video-display unit workstations: repeatability, validity and responsiveness to changes.

PubMed

Ketola, Ritva; Toivonen, Risto; Luukkonen, Ritva; Takala, Esa-Pekka; Viikari-Juntura, Eira

2004-08-01

Inter-observer repeatability, validity and responsiveness to change were determined for an expert assessment method for video-display unit (VDU) workstation ergonomics. The aim was to determine to what extent the expert assessment of ergonomics is related to the technical measurements, tidiness and space, work chair ergonomics and responds to changes in these characteristics. Technical measurements and video-recordings before and 2 months after an ergonomic intervention were made for 109 VDU office workstations. Two experts in ergonomics analysed and rated the ergonomics of the workstations. A researcher analysed tidiness and available space. A physiotherapist classified the work chairs used according to their ergonomic properties. The intra-class correlation coefficient between the workstation ergonomic ratings of the two experts was 0.74 at the baseline and 0.81 at the follow-up. Workstation tidiness and space, and work chair ergonomics, had a strong effect on the assessments of both experts. For both experts a change in the locations of the mouse, the screen and the keyboard and values of tidiness and space and work chair ergonomics during the intervention showed a significant association with the ratings. The assessment method studied can be utilized by an expert in a repeatable manner both in cross-sectional and in longitudinal settings.

Ergonomics in dentistry: experiences of the practice by dental students.

PubMed

Garcia, P P N S; Gottardello, A C A; Wajngarten, D; Presoto, C D; Campos, J A D B

2017-08-01

The aim of this study was to qualitatively evaluate the experiences of students enrolled in the last year of dentistry school with ergonomic practice. This is a qualitative, observational and cross-sectional study, with a non-probabilistic sample design. The sample comprised students enrolled in the last year of dentistry in Araraquara-UNESP (n = 29). The data were collected by means of open semi-structured and individual interviews, captured by a digital voice recorder. The students were interviewed in their own university at a time that was previously scheduled, and care was taken to provide a private and welcoming environment to carry out the interviews. A script containing questions related to practices in ergonomics was prepared at the university. Data analysis was carried out using the qualitative-quantitative Collective Subject Discourse technique with the aid of Qualiquantisoft ® software program. It was found that more than half of the students (58.6%) believe that adopting an ergonomic posture is important to prevent future problems, pain and occupational diseases, and 62.1% of the students confirm having difficulties in adopting ergonomic postures due to the types of treatment required and the regions of the mouth being treated. The main reasons stated for the fact that their colleagues do not adopt ergonomic postures are lack of attention, practice and forgetfulness (44.8%) and difficulty in visualising the operatory field or the procedure performed (27.6%). It is possible to conclude that the students interviewed know ergonomic principles and their importance in occupational health. However, they found it difficult to put these principles into practice. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The discipline of ergonomics in Cuba within the occupational health framework: background and trends.

PubMed

Torres, Yaniel; Rodríguez, Yordán; Viña, Silvio

2013-01-01

The concept of ergonomics was introduced in Cuba at the beginning of the 1970s. More than 40 years later, the prevailing approach to workers' health is still generally reactive rather than proactive, despite the commitment of the government to the subject. A factor influencing this issue is, generally, lack of recognition of the benefits of establishing ergonomic principles within most occupational activities. Recent progress to move occupational health practice toward a more preventive approach has been conducted, frequently with international support. The introduction of a set of Cuban standards proposing the necessity of ergonomic evaluations is an example of this progress. The main challenge for Cuban ergonomists is to transfer knowledge to occupational health practitioners in order to be in concordance with basic standards and regulations regarding ergonomics. The article offers a short description of the history of ergonomics and an overview of ergonomics practice in Cuba.

Ergonomic evaluation of ten single-channel pipettes.

PubMed

Lichty, Monica G; Janowitz, Ira L; Rempel, David M

2011-01-01

Repetitive pipetting is a task that is associated with work-related musculoskeletal disorders of the hand and arm. The purpose of this study was to evaluate the usability and ergonomic performance of commercially available pipettes as determined by user ratings and objective measurements. Participants were laboratory technicians and scientists at the Lawrence Berkeley National Laboratory with experience performing pipetting tasks. Twenty-one experienced pipette users completed a standardized pipetting task with 5 manual and 5 electronic pipettes. After using each pipette, the user rated it for attributes of comfort and usability. Although no single pipette was rated significantly better than all of the others for every attribute tested, some significant differences were found between pipettes. The Rainin Pipet-Lite received the highest overall quality score among manual pipettes, while the Thermo Scientific Finnpipette Novus was the top-ranked electronic pipette. Features correlated with greater hand and arm comfort were lower tip ejection force, lower blowout force, and pipette balance in the hand. The findings, when considered with participant comments, provide insights into desirable pipette features and emphasize the value of user testing and the importance of the interactions between task, workplace layout, and pipette design. © 2011 - IOS Press and the authors. All rights reserved

Ergonomic workplace assessment in orthotic and prosthetic workshops.

PubMed

Salmani Nodooshan, H; Koohi Booshehri, S; Daneshmandi, H; Choobineh, A R

2016-10-17

In Iranian orthotic and prosthetic workshops, the majority of activities are carried out by manpower and the tasks are labor-intensive. In these workshops, ergonomic aspects of working conditions are seldom considered. This study was conducted in orthotic and prosthetic workshops with the objectives of determination of prevalence rate of MSDs among employees and assessment of ergonomics working conditions. In this cross-sectional study, all employees (n = 42; 29 males and 13 females) in 11 active orthotic and prosthetic production centers of Shiraz city participated. Data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and observational technique by an ergonomics checklist for assessment of working conditions. The means (SD) of age and job tenure (years) in the study individuals were 37.26 (10.21) and 12.8 (9.39), respectively. The most prevalent MSD symptoms in the past 12 months were reported in the lower back (42.9%), shoulders (40.5%) and knees (40.5%). Working conditions assessment showed that the main ergonomic problems in the workshops studied originated from awkward working posture, improper workstation design, poorly designed hand tools and incorrect manual material handling. Any interventional program for working conditions improvement should, therefore, focus on these areas.

Participatory ergonomics for psychological factors evaluation in work system design.

PubMed

Wang, Lingyan; Lau, Henry Y K

2012-01-01

It is a well recognized understanding that workers whose voice needs to be heard should be actively encouraged as full participants and involved in the early design stages of new ergonomic work system which encompass the development and implementation of new tools, workplaces, technologies or organizations. This paper presents a novel participatory strategy to evaluate three key psychological factors which are respectively mental fatigue, spiritual stress, and emotional satisfaction in work system design based on a modified version of Participatory Ergonomics (PE). In specific, it integrates a PE technique with a formulation view by combining the parallel development of PE strategies, frameworks and functions throughout the coverage of the entire work system design process, so as to bridge the gap between qualitative and quantitative analysis of psychological factors which can cause adverse or advantageous effects on worker's physiological and behavioral performance.

The amount of ergonomics and user involvement in 151 design processes.

PubMed

Kok, Barbara N E; Slegers, Karin; Vink, Peter

2012-01-01

Ergonomics, usability and user-centered design are terms that are well known among designers. Yet, products often seem to fail to meet the users' needs, resulting in a gap between expected and experienced usability. To understand the possible causes of this gap the actions taken by the designer during the design process are studied in this paper. This can show whether and how certain actions influence the user-friendliness of the design products. The aim of this research was to understand whether ergonomic principles and methods are included in the design process, whether users are involved in this process and whether the experience of the designer (in ergonomics/user involvement) has an effect on the end product usability. In this study the design processes of 151 tangible products of students in design were analyzed. It showed that in 75% of the cases some ergonomic principles were applied. User involvement was performed in only 1/3 of the design cases. Hardly any correlation was found between the designers' experience in ergonomic principles and the way they applied it and no correlations were found between the designers' experience in user involvement and the users' involvement in the design process.

Connections between voice ergonomic risk factors and voice symptoms, voice handicap, and respiratory tract diseases.

PubMed

Rantala, Leena M; Hakala, Suvi J; Holmqvist, Sofia; Sala, Eeva

2012-11-01

The aim of the study was to investigate the connections between voice ergonomic risk factors found in classrooms and voice-related problems in teachers. Voice ergonomic assessment was performed in 39 classrooms in 14 elementary schools by means of a Voice Ergonomic Assessment in Work Environment--Handbook and Checklist. The voice ergonomic risk factors assessed included working culture, noise, indoor air quality, working posture, stress, and access to a sound amplifier. Teachers from the above-mentioned classrooms reported their voice symptoms, respiratory tract diseases, and completed a Voice Handicap Index (VHI). The more voice ergonomic risk factors found in the classroom the higher were the teachers' total scores on voice symptoms and VHI. Stress was the factor that correlated most strongly with voice symptoms. Poor indoor air quality increased the occurrence of laryngitis. Voice ergonomics were poor in the classrooms studied and voice ergonomic risk factors affected the voice. It is important to convey information on voice ergonomics to education administrators and those responsible for school planning and taking care of school buildings. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Ergonomic analysis of work activity for the purpose of developing training programs: the contribution of ergonomics to vocational didactics.

PubMed

Ouellet, Sylvie

2012-01-01

Questions related to job skills and the teaching situations that best promote skill development are investigated by specialists in various fields, notably among them, ergonomists. This paper presents the findings of an ergonomic intervention study whose aim was to develop a meat-deboning training program by taking into account both the training content to be constructed and the working conditions that might facilitate or hinder skill development. One-on-one interviews and group discussions, on-the-job and videotape playback observations, as well as self-confrontation interviews were carried out. Activity analysis revealed major variability in work methods. The reasoning behind the experienced workers' actions and the experiential job knowledge they had developed were brought to light and served to develop the training content. The determining factors in the choice of work methods were identified, allowing adjustments to be made to the working conditions that might hinder skill development. The ergonomic process that implied taking working conditions into account in our study may make a significant contribution to vocational didactics, which is based on the cognitive analysis of work for the purpose of improving the effectiveness of job-skills training.

Cognitive-ergonomics and instructional aspects of e-learning courses.

PubMed

Rodrigues, Martha; Castello Branco, Iana; Shimioshi, José; Rodrigues, Evaldo; Monteiro, Simone; Quirino, Marcelo

2012-01-01

This paper presents an analysis of cognitive-ergonomic aspects of e-learning courses, offered by an organism from Brazilian Public Administration. The Cognitive Ergonomic studies conductive and cognitive aspects concerning to the relation between human, physics elements and social elements of the work space. From that usability aspects were evaluated by these points: i) visualization; ii) text comprehension lecture; iii) memory; iv) interface; v) instructional design; and vi) attention and learning. That survey is characterized as having been applied using the following techniques: (1) bibliographic survey, (2) field survey and (3) analysis of the documents. It was chosen the semi-structured questionnaire as the main method of data collection. About the interacting with artifacts, the interface of the courses is classified as direct engagement, because it allows the user to get the feeling that acts directly on the objects. Although the courses are well-structured they have flaws that will be discussed below. Even with these problems, the courses have a good degree of usability.

Space Sciences Laboratory Publications and Presentations

NASA Technical Reports Server (NTRS)

Moorehead, T. W. (Compiler)

1995-01-01

This document lists the significant publications and presentations of the Space Sciences Laboratory during the period Jan. 1 - Dec. 31, 1994. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an appendix (arranged by report number) listing preprints issued by the laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in referenced professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publications in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. The organizational code of the cognizant SSL branch or office is given at the end of each entry.

Space Science Laboratory Publications and Presentations

NASA Technical Reports Server (NTRS)

Moorehead, T. W. (Compiler)

1993-01-01

This document lists the significant publications and presentations of the Space Science Laboratory during the period January 1 - December 31, 1992. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by report number) listing preprints issued by the Laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publications in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. The organizational code of the cognizant SSL branch or office is given at the end of each entry.

Initial experience using a robotic-driven laparoscopic needle holder with ergonomic handle: assessment of surgeons' task performance and ergonomics.

PubMed

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M

2017-12-01

The objective of this study is to assess the surgeons' performance and ergonomics during the use of a robotic-driven needle holder in laparoscopic suturing tasks. Six right-handed laparoscopic surgeons with different levels of experience took part in this study. Participants performed a set of three different intracorporeal suturing tasks organized in ten trials during a period of five weeks. Surgeons used both conventional (Conv) and robotic (Rob) laparoscopic needle holders. Precision using the surgical needle, quality of the intracorporeal suturing performance, execution time and leakage pressure for the urethrovesical anastomosis, as well as the ergonomics of the surgeon's hand posture, were analyzed during the first, fifth and last trials. No statistically significant differences in precision and quality of suturing performance were obtained between both groups of instruments. Surgeons required more time using the robotic instrument than using the conventional needle holder to perform the urethrovesical anastomosis, but execution time was significantly reduced after training ([Formula: see text] 0.05). There were no differences in leakage pressure for the anastomoses carried out by both instruments. After training, novice surgeons significantly improved the ergonomics of the wrist ([Formula: see text] 0.05) and index finger (Conv: 36.381[Formula: see text], Rob: 30.389[Formula: see text]; p = 0.024) when using the robotic instrument compared to the conventional needle holder. Results have shown that, although both instruments offer similar technical performance, the robotic-driven instrument results in better ergonomics for the surgeon's hand posture compared to the use of a conventional laparoscopic needle holder in intracorporeal suturing.

Mobile work: Ergonomics in a rapidly changing work environment.

PubMed

Honan, Meg

2015-01-01

Places of work have been completely transformed by innovations in mobile work tools and ever-present access to internet data. This article characterizes use patterns and provides preliminary considerations for productive and comfortable use of common mobile devices. Two surveys described trends in mobile work. In the first, ergonomics professionals who oversee programs reported common mobile devices, their users and what data is accessed. The second, an end user survey, explored common activities performed on mobile devices, duration of use and locations where mobile work is common. The survey results provide a baseline data point for the status of mobile work in early 2014. Research indicates that additional risks have been introduced to the neck, thumbs and hands when using mobile devices. Possible trends regarding device use and work locations emerge. Intervention studies provide some direction for the practitioner. Practical strategies are outlined to reduce exposure intensity and duration. Contemporary mobile work presents tremendous change and opportunity for ergonomists and researchers to keep pace with fitting the changing models of work to the person. Continued research is needed on current mobile device use patterns to better understand ergonomic risk exposure in this rapidly changing realm.

Optimal ergonomics for laparoscopic surgery in minimally invasive surgery suites: a review and guidelines.

PubMed

van Det, M J; Meijerink, W J H J; Hoff, C; Totté, E R; Pierie, J P E N

2009-06-01

With minimally invasive surgery (MIS), a man-machine environment was brought into the operating room, which created mental and physical challenges for the operating team. The science of ergonomics analyzes these challenges and formulates guidelines for creating a work environment that is safe and comfortable for its operators while effectiveness and efficiency of the process are maintained. This review aimed to formulate the ergonomic challenges related to monitor positioning in MIS. Background and guidelines are formulated for optimal ergonomic monitor positioning within the possibilities of the modern MIS suite, using multiple monitors suspended from the ceiling. All evidence-based experimental ergonomic studies conducted in the fields of laparoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches and selected for quality and applicability. Data from ergonomic studies were evaluated in terms of effectiveness and efficiency as well as comfort and safety aspects. Recommendations for individual monitor positioning are formulated to create a personal balance between these two ergonomic aspects. Misalignment in the eye-hand-target axis because of limited freedom in monitor positioning is recognized as an important ergonomic drawback during MIS. Realignment of the eye-hand-target axis improves personal values of comfort and safety as well as procedural values of effectiveness and efficiency. Monitor position is an important ergonomic factor during MIS. In the horizontal plain, the monitor should be straight in front of each person and aligned with the forearm-instrument motor axis to avoid axial rotation of the spine. In the sagittal plain, the monitor should be positioned lower than eye level to avoid neck extension.

DHM and serious games: a case-study oil and gas laboratories.

PubMed

Santos, V; Zamberlan, M; Streit, P; Oliveira, J; Guimarães, C; Pastura, F; Cid, G

2012-01-01

The aim in this paper is to present a research on the application of serious games for the design of laboratories in the oil and gas industries. The focus is in human virtual representation acquired from 3D scanning, human interaction, workspace layout and equipment designed considering ergonomics standards. The laboratory studies were simulated in Unity3D platform, which allows the users to control the DHM1 on the dynamic virtual scenario, in order to simulate work activities. This methodology can change the design process by improving the level of interaction between final users, managers and human factor teams. That helps to better visualize future work settings and improve the level of participation between all stakeholders.

[Multifactorial ergonomic evaluation of the hospital nursing activity in assisting not self-sufficient patients].

PubMed

Capodaglio, E M; Capodaglio, P; Bazzini, G

1999-01-01

8 Institutes of Health Care and Research of Northern-Central Italy participated in the study, which consisted of on-site investigations, interviews with the chief-nurse, and monitoring of physiological and subjective variables. We studied the most critical phases in the laboratory, by means of video-graphical systems for biomechanical and postural analysis. The outlined profile shows a demanding activity, yielding important risk factors relative to musculoskeletal lesions. The preventive attitude (education, training) must be implemented by ergonomic interventions, aimed to minimize the risk related to manual handling.

[Ergonomics and productivity: an example applied to a manufacturing industry].

PubMed

Battevi, Natale; Vitelli, Nora

2013-01-01

The survival of manufacturing in the western world also depends on the ability to increase productivity. To achieve this goal, it is necessary to recover the efficiency of all workers suffering from upper limb biomechanical overload disease. Ergonomic methods can be a valuable tool in solving this apparent conflict: operatives'productivity and health. After carrying out an ergonomic education and training programme for all company employees and risk assessment for upper limb biomechanical overload through the OCRA checklist method, a programme of improvements on a production line was planned and tested, mainly based on international and European standards. Within approximately 2 years, thanks to changes in workplace layout and organization, a significant reduction of 22.7% in risk level was achieved and, at the same time, a 16% increase in productivity. An ergonomic approach based on global, interdisciplinary and participatory principles in the case considered showed that it is possible to match increased productivity with decreased risk. In this specific case application of ergonomic principles during product design was rather poor, which is typical of companies working for third party customers.

Understanding knowledge transfer in an ergonomics intervention at a poultry processing plant.

PubMed

Antle, David M; MacKinnon, Scott N; Molgaard, John; Vézina, Nicole; Parent, Robert; Bornstein, Stephen; Leclerc, Louise

2011-01-01

This case study reviews the knowledge transfer (KT) process of implementing a knife sharpening and steeling program into a poultry processing plant via a participatory ergonomics intervention. This ergonomics intervention required stakeholder participation at the company level to move a 'train-the-trainer' program, developed in Québec, Canada, into action on the plant's deboning line. Communications and exchanges with key stakeholders, as well as changes in steeling and production behaviours were recorded. The intervention was assumed to be at least partially successful because positive changes in work operations occurred. Ergonomic-related changes such as those documented have been cited in the academic literature as beneficial to worker health. However, several components cited in literature that are associated with a successful participatory ergonomics intervention were not attained during the project. A Dynamic Knowledge Transfer Model was used to identify KT issues that impacted on the success of train-the-trainer program. A debriefing analysis reveals that a failure to consider key participatory ergonomics factors necessary for success were related to capacity deficits in the knowledge dissemination strategy.

The application of participatory ergonomics in a healthcare setting in Hong Kong.

PubMed

Lee, Edwin W C; Fok, Joan P C; Lam, Augustine T; Law, Rainbow K Y; Szeto, Grace P Y; Li, Philip P K

2014-01-01

Work-related musculoskeletal disorders (WRMDs) are recognized as a major source of significant pain and disability in the healthcare sector. However, they are preventable if appropriate surveillance and intervention programs are implemented. The purpose of this paper is to describe the holistic ergonomic approach that was used to address the multifactorial problems encountered by healthcare workers in their daily work. Using participatory ergonomics, healthcare workers in this study teamed up with management and staff with expertise in ergonomic analysis, design, and implementation of remedies. Selected participatory ergonomic intervention programs targeted at an organizational level are elaborated. Interventions included pre-work stretching, workplace surveillance at a psychiatric department, on-site ergonomic teaching for community nurses, and display screen equipment consultancy. Changes in workplace design, equipment re-arrangement, awareness of proper posture, and adoption of good work practices all play important roles in reducing musculoskeletal disorders among healthcare workers. Prompt occupational medicine and rehabilitation services were also provided to complement the work disability prevention process. The impact of the various intervention programs on staff health, costs and productivity of the organization are simultaneously discussed.

Connections between voice ergonomic risk factors in classrooms and teachers' voice production.

PubMed

Rantala, Leena M; Hakala, Suvi; Holmqvist, Sofia; Sala, Eeva

2012-01-01

The aim of the study was to investigate if voice ergonomic risk factors in classrooms correlated with acoustic parameters of teachers' voice production. The voice ergonomic risk factors in the fields of working culture, working postures and indoor air quality were assessed in 40 classrooms using the Voice Ergonomic Assessment in Work Environment - Handbook and Checklist. Teachers (32 females, 8 males) from the above-mentioned classrooms recorded text readings before and after a working day. Fundamental frequency, sound pressure level (SPL) and the slope of the spectrum (alpha ratio) were analyzed. The higher the number of the risk factors in the classrooms, the higher SPL the teachers used and the more strained the males' voices (increased alpha ratio) were. The SPL was already higher before the working day in the teachers with higher risk than in those with lower risk. In the working environment with many voice ergonomic risk factors, speakers increase voice loudness and use more strained voice quality (males). A practical implication of the results is that voice ergonomic assessments are needed in schools. Copyright © 2013 S. Karger AG, Basel.

Ergonomic Considerations for the Human Environment: Color Treatment, Lighting, and Furniture Selection.

ERIC Educational Resources Information Center

Robertson, Michelle M.

1992-01-01

Discusses ergonomic design considerations for library media centers. Specific design variables, including temperature and humidity, noise, illumination, color, and windows are discussed; and computer workstation design requirements are presented that address furniture and keyboard design, monitor and display features, software issues, and…

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

PubMed

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[Ergonomics in planning and reconstruction].

PubMed

Baglioni, A; Capolongo, S

2002-01-01

The state of well being of people is not represented only by any illness, but also by the satisfaction of all environmental components around him. For this reason, the hospitals demand new and more project attentions and in particular they demand specific attentions for all the environmental qualities (light, colours, indoor air qualities, and temperature), the equipment, the furniture and the privacy. This new attention to the requirements of people, during the phase of planning, needs the ergonomic studies. This kind of discipline, in fact, has got the objective of good relationships between men and context where they live. The study of ergonomic qualities needs different competence of multiple areas of acquaintance, that collaborate to analyse the requirements of sanitary structure, and in particular they analyse needs of different categories of people that work or stay in this place (the patients, visitors and sanitary staff). Moreover ergonomic studies concurs to analyse the various factors of complexity, of the buildings, that are very important for the project of hospital. From the scientific literature, we say that some physical environmental characteristics (light, colour, noise,) can influence the psychological conditions of people, and in particular they can generate three different categories of reactions: behavioural, neuropsychological, neuroendocrinal. For this reason the study of all the environmental factors, simple and composed, is a primary necessity in the hospital planning. In this way we can guarantee to the patient, a better sanitary service and a better comfort, and we can guarantee to all sanitary staff adequate conditions of security and functionality.

Evaluating a digital ship design tool prototype: Designers' perceptions of novel ergonomics software.

PubMed

Mallam, Steven C; Lundh, Monica; MacKinnon, Scott N

2017-03-01

Computer-aided solutions are essential for naval architects to manage and optimize technical complexities when developing a ship's design. Although there are an array of software solutions aimed to optimize the human element in design, practical ergonomics methodologies and technological solutions have struggled to gain widespread application in ship design processes. This paper explores how a new ergonomics technology is perceived by naval architecture students using a mixed-methods framework. Thirteen Naval Architecture and Ocean Engineering Masters students participated in the study. Overall, results found participants perceived the software and its embedded ergonomics tools to benefit their design work, increasing their empathy and ability to understand the work environment and work demands end-users face. However, participant's questioned if ergonomics could be practically and efficiently implemented under real-world project constraints. This revealed underlying social biases and a fundamental lack of understanding in engineering postgraduate students regarding applied ergonomics in naval architecture. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ergonomics, quality and continuous improvement--conceptual and empirical relationships in an industrial context.

PubMed

Eklund, J

1997-10-01

This paper reviews the literature comparing the fields of ergonomics and quality, mainly in an industrial context, including mutual influences, similarities and differences. Relationships between ergonomics and the factors: work conditions, product design, ISO 9000, continuous improvements and TQM are reviewed in relation to the consequence, application, and process domains. The definitions of ergonomics and quality overlap substantially. Quality deficiencies, human errors and ergonomics problems often have the same cause, which in many cases can be traced to the design of work, workplace and environment e.g. noise, light, postures, loads, pace and work content. In addition, the possibility of performing to a high standard at work is an important prerequisite for satisfaction and well-being. Contradictions between the two fields have been identified in the view of concepts such as standardization, reduction of variability and copying of best practice, requiring further research. The field of quality would gain by incorporating ergonomics knowledge, especially in the areas of work design and human capability, since these factors are decisive for human performance and also therefore the performance of the systems involved. The field of ergonomics, on the other hand, would benefit from developing a stronger emphasis on methodologies and structures for improvement processes, including a clearer link with leadership and company strategies. Just as important is a further development of practicable participative ergonomics methods and tools for use at workplaces by the workers themselves, in order to integrate the top-down and the bottom-up processes and achieve better impact. Using participative processes for problem-solving and continuous improvement, focusing ergonomics and quality jointly has a great potential for improving working conditions and quality results simultaneously, and satisfying most of the interested parties.

Ergonomics technology

NASA Technical Reports Server (NTRS)

Jones, W. L.

1977-01-01

Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

PubMed Central

Boschman, Julitta S.; Frings-Dresen, Monique H.W.; van der Molen, Henk F.

2015-01-01

Background The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. Methods A questionnaire was sent at baseline and 2 years later to 1,130 construction workers. We established (1) the proportion of workers reporting an increase in their use of ergonomic measures, (2) the proportion of workers reporting a decrease in MSDs, (3) the relative risk for an increase in the use of ergonomic measures and a decrease in MSDs, and (4) workers' knowledge and opinions about the use of ergonomic measures. Results At follow-up, response rate was 63% (713/1,130). The proportion of workers using ergonomic measures for vertical transport increased (34%, 144/419, p < 0.01); for measures regarding horizontal transport and the positioning of materials, no change was reported. The proportion of workers reporting shoulder complaints decreased (28%, 176/638, p = 0.02). A relationship between the use of ergonomic measures and MSDs was not found; 83% (581/704) of the workers indicated having sufficient knowledge about ergonomic measures. Lightening the physical load was reported to be the main reason for using them. Conclusion Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures. PMID:26106507

Warfighter Integrated Physical Ergonomics Tool Development: Needs Analysis and State of the Art Review

DTIC Science & Technology

2011-03-01

Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 14 e) Forces: Griffon seat design assessments include questions of vibration...the suitability of alternative designs . Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 5 e) Performance Measures...configurations to assess Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 8 design and acquisition decisions, and more

Inculcating the ergonomic culture in developing countries: national healthy schoolbag initiative in Sri Lanka.

PubMed

Jayaratne, Kapila

2012-12-01

The aim of this article is to describe a survey on ergonomic factors of classroom environments of school children, their influence on health, and use of research outcomes to launch a healthy schoolbag initiative. Ergonomics have not yet well penetrated relevant fields in industrially developing countries, such as Sri Lanka. One of the crucial parameters of the school environment is ergonomics. Available evidence suggests ergonomic mismatches in classroom settings. Good practice examples in child ergonomic interventions are few in resource-poor contexts. A school-based cross-sectional study was conducted in a district in Sri Lanka with a sample of 1,607 children in Grades 6 to 8 with the use of a stratified multistage cluster sampling method. Many children did experience discomfort related to substandard seating arrangements in the classroom. A significant proportion had to turn their necks to see the blackboard. For many children, seating locations were not changed. There were widespread incompatibilities of classroom furniture with anthropometric dimensions of children. A majority of children perceived discomfort contributed by mismatched classroom furniture. Carriage of school materials was not healthy. Deficiencies were noted in weight, model, ergonomic features, and carrying behavior of bags. Children experienced several negative effects, in part attributable to mismatched ergonomic factors. The schoolbag was considered a priority issue. Findings were disseminated to stakeholders and to media. Solutions were contemplated on bag weight reduction, healthy schoolbag introduction, and behavior change in a collaborative initiative with the Education Ministry. Political, administrative, and business stakeholders were successfully engaged to inculcate an ergonomic culture in an industrially developing country.

Ergonomic analysis of primary and assistant surgical roles.

PubMed

Zihni, Ahmed M; Cavallo, Jaime A; Ray, Shuddhadeb; Ohu, Ikechukwu; Cho, Sohyung; Awad, Michael M

2016-06-15

Laparoscopic surgery is associated with a high degree of ergonomic stress. However, the stress associated with surgical assisting is not known. In this study, we compare the ergonomic stress associated with primary and assistant surgical roles during laparoscopic surgery. We hypothesize that higher ergonomic stress will be detected in the primary operating surgeon when compared with the surgical assistant. One right-hand dominant attending surgeon performed 698 min of laparoscopic surgery over 13 procedures (222 min primary and 476 min assisting), whereas electromyography data were collected from bilateral biceps, triceps, deltoids, and trapezius muscles. Data were analyzed in 1-min segments. Average muscle activation as quantified by maximal voluntary contraction (%MVC) was calculated for each muscle group during primary surgery and assisting. We compared mean %MVC values with unpaired t-tests. Activation of right (R) biceps and triceps muscle groups is significantly elevated while operating when compared with assisting (R biceps primary: 5.47 ± 0.21 %MVC, assistant: 3.93 ± 0.11, P < 0.001; R triceps primary: 6.53 ± 0.33 %MVC, assistant: 5.48 ± 0.18, P = 0.002). Mean activation of the left trapezius muscle group is elevated during assisting (primary: 4.33 ± 0.26 %MVC, assistant: 5.70 ± 0.40, P = 0.024). No significance difference was noted in the other muscle groups (R deltoid, R trapezius, left [L] biceps, L triceps, and L deltoid). We used surface electromyography to quantify ergonomic differences between operating and assisting. Surgical assisting was associated with similar and occasionally higher levels of muscle activation compared with primary operating. These findings suggest that surgical assistants face significant ergonomic stress, just as operating surgeons do. Steps must be taken to recognize and mitigate this stress in both operating surgeons and assistants. Copyright © 2016 Elsevier Inc. All rights reserved.

Musculoskeletal symptoms amongst clinical radiologists and the implications of reporting environment ergonomics--a multicentre questionnaire study.

PubMed

Rodrigues, Jonathan C L; Morgan, Steven; Augustine, Katharine; Clague, Gavin; Pearce, Tim; Pollentine, Adrian; Wallis, Adam; Wilson, David; McCoubrie, Paul

2014-04-01

This multicentre study aimed to assess compliance of the reporting environment with best ergonomic practice and to determine the prevalence of musculoskeletal symptoms related to working as a radiologist. All 148 radiology trainees and consultants in 10 hospitals across the region were invited to complete a musculoskeletal symptoms and reporting ergonomics questionnaire. Best ergonomic reporting practice was defined, following literature review, as being able to alter the following: monitor, desk, chair and armrest height, chair back support, ambient light, and temperature. The frequency that these facilities were available and how often they were used was determined. One hundred and twenty-three out of 148 (83%) radiologists responded, and 38% reported radiology-associated occupational injury. Lower back discomfort was the commonest radiology associated musculoskeletal symptom (41%). Only 13% of those with occupational injury sought the advice of occupational health. No reporting environments conformed completely to best ergonomic practice. Where certain facilities were available, less than a third of radiologists made personal ergonomic adjustments prior to starting a reporting session. Radiologists who had good self-assessed knowledge of best ergonomic practice had significantly less back discomfort than those with poor self-assessed knowledge (P < 0.005). We demonstrated high prevalence of musculoskeletal symptoms amongst radiologists. Poor compliance of the reporting environment with best ergonomic practice, in combination with our other findings of a low level of ergonomic awareness, low rates of making ergonomic adjustments and seeking appropriate help, may be implicated. We hope this study raises awareness of this issue and helps prevent long-term occupational injury amongst radiologists from poor ergonomic practice.

Analysis of the implementation of ergonomic design at the new units of an oil refinery.

PubMed

Passero, Carolina Reich Marcon; Ogasawara, Erika Lye; Baú, Lucy Mara Silva; Buso, Sandro Artur; Bianchi, Marcos Cesar

2012-01-01

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.

Evidence-based ergonomics education: Promoting risk factor awareness among office computer workers.

PubMed

Mani, Karthik; Provident, Ingrid; Eckel, Emily

2016-01-01

Work-related musculoskeletal disorders (WMSDs) related to computer work have become a serious public health concern. Literature revealed a positive association between computer use and WMSDs. The purpose of this evidence-based pilot project was to provide a series of evidence-based educational sessions on ergonomics to office computer workers to enhance the awareness of risk factors of WMSDs. Seventeen office computer workers who work for the National Board of Certification in Occupational Therapy volunteered for this project. Each participant completed a baseline and post-intervention ergonomics questionnaire and attended six educational sessions. The Rapid Office Strain Assessment and an ergonomics questionnaire were used for data collection. The post-intervention data revealed that 89% of participants were able to identify a greater number of risk factors and answer more questions correctly in knowledge tests of the ergonomics questionnaire. Pre- and post-intervention comparisons showed changes in work posture and behaviors (taking rest breaks, participating in exercise, adjusting workstation) of participants. The findings have implications for injury prevention in office settings and suggest that ergonomics education may yield positive knowledge and behavioral changes among computer workers.

Surgeons' physical discomfort and symptoms during robotic surgery: a comprehensive ergonomic survey study.

PubMed

Lee, G I; Lee, M R; Green, I; Allaf, M; Marohn, M R

2017-04-01

It is commonly believed that robotic surgery systems provide surgeons with an ergonomically sound work environment; however, the actual experience of surgeons practicing robotic surgery (RS) has not been thoroughly researched. In this ergonomics survey study, we investigated surgeons' physical symptom reports and their association with factors including demographics, specialties, and robotic systems. Four hundred and thirty-two surgeons regularly practicing RS completed this comprehensive survey comprising 20 questions in four categories: demographics, systems, ergonomics, and physical symptoms. Chi-square and multinomial logistic regression analyses were used for statistical analysis. Two hundred and thirty-six surgeons (56.1 %) reported physical symptoms or discomfort. Among those symptoms, neck stiffness, finger, and eye fatigues were the most common. With the newest robot, eye symptom rate was considerably reduced, while neck and finger symptoms did not improve significantly. A high rate of lower back stiffness was correlated with higher annual robotic case volume, and eye symptoms were more common with longer years practicing robotic surgery (p < 0.05). The symptom report rate from urology surgeons was significantly higher than other specialties (p < 0.05). Noticeably, surgeons with higher confidence and helpfulness levels with their ergonomic settings reported lower symptom report rates. Symptoms were not correlated with age and gender. Although RS provides relatively better ergonomics, this study demonstrates that 56.1 % of regularly practicing robotic surgeons still experience related physical symptoms or discomfort. In addition to system improvement, surgeon education in optimizing the ergonomic settings may be necessary to maximize the ergonomic benefits in RS.

Integration of time as a factor in ergonomic simulation.

PubMed

Walther, Mario; Muñoz, Begoña Toledo

2012-01-01

The paper describes the application of a simulation based ergonomic evaluation. Within a pilot project, the algorithms of the screening method of the European Assembly Worksheet were transferred into an existing digital human model. Movement data was recorded with an especially developed hybrid Motion Capturing system. A prototype of the system was built and is currently being tested at the Volkswagen Group. First results showed the feasibility of the simulation based ergonomic evaluation with Motion Capturing.

AORN ergonomic tool 2: positioning and repositioning the supine patient on the OR bed.

PubMed

Waters, Thomas; Short, Manon; Lloyd, John; Baptiste, Andrea; Butler, Lorraine; Petersen, Carol; Nelson, Audrey

2011-04-01

Positioning or repositioning a patient on the OR bed in preparation for a surgical procedure presents a high risk for musculoskeletal disorders, such as low-back and shoulder injuries, for perioperative personnel. Safe patient handling requires knowledge of current ergonomic safety concepts, scientific evidence, and equipment and devices to ensure that neither the patient nor the caregiver is at risk for injury. AORN Ergonomic Tool 2: Positioning and Repositioning the Supine Patient on the OR Bed provides guidelines that enable perioperative personnel to determine safe methods for positioning and repositioning a patient in the semi-Fowler, lateral, or lithotomy position in preparation for surgery. Published by Elsevier Inc.

Ergonomics and musculoskeletal disorder: as an occupational hazard in dentistry.

PubMed

Gopinadh, Anne; Devi, Kolli Naga Neelima; Chiramana, Sandeep; Manne, Prakash; Sampath, Anche; Babu, Muvva Suresh

2013-03-01

Musculoskeletal disorders (MSDs) are commonly experienced in dentistry. The objective of this study is to determine the prevalence of ergonomics and MSDs among dental professionals. A cross-sectional survey was conducted among 170 dentists of different specialties. The questionnaire gathered information regarding demographic details, MSDs, work duration, working status, awareness of ergonomics, etc. Data was analyzed using SPSS version 15.0. Student's t-test and analysis of variance (ANOVA) test was used for comparison in mean scores. Stepwise multiple linear regression analysis was used to assess the independent variables that significantly influenced the variance in the dependent variable (pain). It was found that 73.9% of the participants reported musculoskeletal pain and most common painful sites were neck and back. More than half of the participants, i.e. 232 (59.3%) were aware of correct ergonomic posture regarding dental. Almost percentage of pain increased significantly with increase in age and working time. Among all specialties, prosthodontics were found to have more prevalence of MSDs. The appearance of musculoskeletal symptoms among dental professionals was quite common. It suggested that ergonomics should be covered in the educational system to reduce risks to dental practitioners.

Ergonomic evaluation of a wheelchair transportation securement system.

PubMed

Ahmed, Madiha; Campbell-Kyureghyan, Naira; Frost, Karen; Bertocci, Gina

2012-01-01

The Americans with Disabilities Act (ADA) specifies guidelines covering the securement system and environment for wheeled mobility device (WhMD) passengers on the public bus system in the United States, referred to as the wheelchair tiedown and occupant restraint system (WTORS). The misuse or disuse of the WTORS system can be a source of injury for WhMD passengers riding the buses. The purpose of this study was to quantify the risks posed to the bus driver while performing the WTORS procedure using traditional ergonomic analysis methods. Four bus drivers completed the WTORS procedure for a representative passenger seated in three different WhMDs: manual wheelchair (MWC), scooter (SCTR), and power wheelchair (PWC). Potential work-related risks were identified using the four most applicable ergonomic assessment tools: PLIBEL, RULA, REBA, and iLMM. Task evaluation results revealed high levels of risk to be present to drivers during the WTORS procedure. The securement station space design and equipment layout were identified as contributing factors forcing drivers to adopt awkward postures while performing the WTORS task. These risk factors are known contributors to injury and the drivers could opt to improperly secure the passengers to avoid that risk.

Practical ways to facilitate ergonomics improvements in occupational health practice.

PubMed

Kogi, Kazutaka

2012-12-01

Recent advances in participatory programs for improving workplace conditions are discussed to examine practical ways to facilitate ergonomics improvements. Participatory training programs are gaining importance, particularly in promoting occupational health and safety in small-scale workplaces. These programs have led to many improvements that can reduce work-related risks in varied situations. Recent experiences in participatory action-oriented training programs in small workplaces and agriculture are reviewed.The emphasis of the review is on training steps, types of improvements achieved, and the use of action tools by trainers and training participants. Immediate improvements in multiple technical areas are targeted, including materials handling,workstation design, physical environment, welfare facilities, and work organization. In facilitating ergonomics improvements in each local situation, it is important to focus on (a) building on local good practices; (b) applying practical, simple improvements that apply the basic principles of ergonomics; and (c) developing action-oriented toolkits for direct use by workers and managers. This facilitation process is effective when locally designed action toolkits are used by trainers, including local good examples, action checklists, and illustrated how-to guides. Intervention studies demonstrate the effectiveness of participatory steps that use these toolkits in promoting good practices and reducing work-related risks. In facilitating ergonomics improvements in small-scale workplaces, it is important to focus on practical, low-cost improvements that build on local good practices. The use of action-oriented toolkits reflecting basic ergonomics principles is helpful.The promotion of the intercountry networking of positive experiences in participatory training is suggested.

Ergonomics and dentistry.

PubMed

Murphy, D C

1997-01-01

Since 1992 the Occupational Safety and Health Administration (OSHA) has been preparing Federal legislation concerned with ergonomic hazards in at-risk workplaces. Although multifactorial in nature, there is sufficient evidence in the scientific literature to document an association between the practice of dentistry and a variety of musculoskeletal disorders. There are preventive strategies already known and available to us. Should dentistry be considered an at-risk profession and be required to comply with the forthcoming standard, or is self-monitoring sufficient?

Ergonomic nursing workstation design to prevent cumulative trauma disorders.

PubMed

McHugh, M L; Schaller, P

1997-01-01

The introduction of computerized nursing information systems offers health care institutions an opportunity to take a new look at safety issues related to nursing workstation design. Industrial studies have investigated the injuries sustained by clerical workers who spend long periods of time at their computers. Cumulative trauma disorders (CTDs) are the most common injuries associated with computerized workstation use. They account for nearly 90,000 injuries each year in the United States. Typical CTDs include back pain, strain of the neck, shoulders and eyes, and carpal tunnel syndrome. As the information handling work of nurses is increasingly computerized, the incidence of computer-related injury is expected to increase. Injury rates can be reduced by ergonomic workstation design. An assessment of potential risks associated with the equipment installed should be done as part of workstation design. Risk identification is a prerequisite for avoiding injuries by designing workstations that protect human health. The ergonomic principles learned and tested on office workers are addressed and extrapolated to nursing workstation design. Specific suggestions for design of sitting and standing workstations are presented.

Corporate ergonomics programme at automobiles Peugeot-Sochaux.

PubMed

Moreau, M

2003-01-01

An ergonomic assessment tool for design procedures, exclusive to Peugeot-Citroën, called ECM, was developed and applied at the design stage by method technicians in the 1990s. It generates data, which are followed up by the project leader of a new model and ergonomists until two years before each launch. During this time, vehicle design is subject to modification, to adapt to ergonomic demands. Simplified methods (DACORS and METEO) were also developed to assess workstations on the shop floor in trim and final plants. Assessments were used to grade the workstations into four profiles linked to physical and static requirements. Production technicians are responsible for the application of these local methods on the shop floor. The management of these centres aimed to reduce the risks of musculoskeletal disorders by reduced heavy profiles of these stations. New cases of musculoskeletal disorders, surveyed by the company doctor among workers on the assembly lines had decreased since 1996. In 1999, the incidence increased again, despite the pursuit of ergonomic methods. This increase in musculoskeletal disorders was above all linked to a major reorganisation of work conditions, including a reduction in the cycle time on the assembly line, and to a move into a new workshop.

The Minimally Invasive Manipulator: an ergonomic and economic non-robotic alternative for endoscopy?

PubMed

Bosma, Jesse; Aarts, Sanne; Jaspers, Joris

2015-02-01

Since the da Vinci robotic system was introduced, it has been reported to have ergonomic advantages over conventional laparoscopy (COV). High investments associated with this system challenged us to design a more economical, mechanical alternative for improvement of laparoscopic ergonomics: the Minimally Invasive Manipulator (MIM). An earlier reported MIM prototype was investigated. Its shortcomings were input for the establishment of design criteria for a new prototype. A new prototype was developed, aiming at improved intuitiveness and ergonomics. The handle and instrument tip were redesigned and the parallelogram mechanism was converted from linear moving parts to mainly rotating parts. The new prototype was tested by a panel of experts and novices during an indicative ergonomic experiment. A major advantage of the MIM seems to be the possibility to perform laparoscopic surgery in a sitting position, in line with the working axis, instead of standing at the side of the patient. At an estimated cost level of 10% of the da Vinci system, the MIM can be an economical alternative for the enhancement of laparoscopy ergonomics. However, further development for clinical feasibility is necessary.

An investigation of low ergonomics risk awareness, among staffs at early product development phase in Malaysia automotive industries

NASA Astrophysics Data System (ADS)

Aziz, Fazilah Abdul; Razali, Noraini; Najmiyah Jaafar, Nur

2016-02-01

Currently there are many automotive companies still unable to effectively prevent consequences of poor ergonomics in their manufacturing processes. This study purpose is to determine the surrounding factors that influence low ergonomics risk awareness among staffs at early product development phase in Malaysia automotive industry. In this study there are four variables, low ergonomic risk awareness, inappropriate method and tools, tight development schedule and lack of management support. The survey data were gathered from 245 respondents of local automotive companies in Malaysia. The data was analysed through multiple regression and moderated regression using the IBM SPSS software. Study results revealed that low ergonomic risk awareness has influenced by inappropriate method and tool, and tight development schedule. There were positive linear relationships between low ergonomic risk awareness and inappropriate method and tools, and tight development schedule. The more inappropriate method and tools applied; the lower their ergonomic risk awareness. The more tight development schedule is the lower ergonomic risk awareness. The relationship between low ergonomic risk awareness and inappropriate method and tools depends on staff's age, and education level. Furthermore the relationship between low ergonomic risk awareness and tight development schedule depends on staff's working experience and number of project involvement. The main contribution of this paper was identified the number of factors of low ergonomics risk awareness and offers better understanding on ergonomics among researchers and automotive manufacturer's employees during product development process.

Determinants of business sustainability: an ergonomics perspective.

PubMed

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human

The implementation of ergonomics advice and the stage of change approach.

PubMed

Rothmore, Paul; Aylward, Paul; Karnon, Jonathan

2015-11-01

This paper investigates the implementation of injury prevention advice tailored according to the Stage of Change (SOC) approach. The managers of 25 workgroups, drawn from medium to large companies across a wide range of occupational sectors were allocated to receive either standard ergonomics advice or ergonomics advice tailored according to the workgroup SOC. Twelve months after the advice was provided, semi-structured interviews were conducted with each manager. In a multivariate model, managers who had received tailored advice were found to have implemented significantly more of the recommended changes (IRR = 1.68, 95% CI 1.07-2.63) and more "additional" changes (IRR = 1.90, 95% CI 1.12-3.20). Qualitative analysis identified that the key barriers and facilitators to the implementation of changes were largely related to worker resistance to change and the attitudes of senior managers towards health and safety. The findings from this study suggest that the implementation of ergonomics recommendations may be improved by the tailoring of advice according to SOC principles. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Sustainable Ergonomic Program - Basic Condition for Implementation of Corporate Social Responsibility

NASA Astrophysics Data System (ADS)

Marková, Petra; Beňo, Rastislav; Hatiar, Karol

2012-12-01

Gradually increasing pressure on companies to start to behave socially responsible is a response to social, environmental and economic requirements. The society faces a period of changes that have occurred since the beginning of the crisis and revealing weaknesses in the economy. We become witnesses of rapid changes and challenges posed by globalization, lack of resources, demographic structure and innovation. Objective necessity becomes a corporate social responsibility (CSR) already at the companies’ level, which is supported by the approach of the EU institutions and the Slovak Republic. One of the possible appliance through which we can contribute to the sustainability of CSR are sustainable ergonomic programs. When we want to talk about sustainable ergonomic program is important to focus on three key areas. The first area is the Impact of technic and technology to employees at work, the second area is the Importance and impact of socially responsible HR in ergonomics and last area is the Creation of the work environment in relation to environmental sustainability. Ergonomic programs sustainability requires to apply appropriate methods for evaluation of their cost benefit and health effect.

Nonlinear dynamical systems for theory and research in ergonomics.

PubMed

Guastello, Stephen J

2017-02-01

Nonlinear dynamical systems (NDS) theory offers new constructs, methods and explanations for phenomena that have in turn produced new paradigms of thinking within several disciplines of the behavioural sciences. This article explores the recent developments of NDS as a paradigm in ergonomics. The exposition includes its basic axioms, the primary constructs from elementary dynamics and so-called complexity theory, an overview of its methods, and growing areas of application within ergonomics. The applications considered here include: psychophysics, iconic displays, control theory, cognitive workload and fatigue, occupational accidents, resilience of systems, team coordination and synchronisation in systems. Although these applications make use of different subsets of NDS constructs, several of them share the general principles of the complex adaptive system. Practitioner Summary: Nonlinear dynamical systems theory reframes problems in ergonomics that involve complex systems as they change over time. The leading applications to date include psychophysics, control theory, cognitive workload and fatigue, biomechanics, occupational accidents, resilience of systems, team coordination and synchronisation of system components.

New virtual laboratories presenting advanced motion control concepts

NASA Astrophysics Data System (ADS)

Goubej, Martin; Krejčí, Alois; Reitinger, Jan

2015-11-01

The paper deals with development of software framework for rapid generation of remote virtual laboratories. Client-server architecture is chosen in order to employ real-time simulation core which is running on a dedicated server. Ordinary web browser is used as a final renderer to achieve hardware independent solution which can be run on different target platforms including laptops, tablets or mobile phones. The provided toolchain allows automatic generation of the virtual laboratory source code from the configuration file created in the open- source Inkscape graphic editor. Three virtual laboratories presenting advanced motion control algorithms have been developed showing the applicability of the proposed approach.

Work-Related Injuries of Radiologists and Possible Ergonomic Solutions: Recommendations From the ACR Commission on Human Resources.

PubMed

Sze, Gordon; Bluth, Edward I; Bender, Claire E; Parikh, Jay R

2017-10-01

Increasingly, radiologists' workplaces revolve around PACS and digital imaging. Use of these technologies can lead to repetitive strain injuries, many of which can be exacerbated by specific features of a radiology practice environment. Ergonomic approaches, such as proper reading room structure, lighting, temperature, noise, and equipment setup, can help decrease the frequency and severity of repetitive strain injuries and improve radiologist productivity. However, ergonomic approaches are complex, include all aspects of the radiology practice environment, and are best implemented along with proper training of the practicing radiologists. The ergonomic approaches considered most important by members of the ACR Commission on Human Resources are presented in this report, and this information may serve as an aid in departmental planning. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Ergonomics and design: its principles applied in the industry.

PubMed

Tavares, Ademario Santos; Silva, Francisco Nilson da

2012-01-01

Industrial Design encompasses both product development and optimization of production process. In this sense, Ergonomics plays a fundamental role, because its principles, methods and techniques can help operators to carry out their tasks most successfully. A case study carried out in an industry shows that the interaction among Design, Production Engineering and Materials Engineering departments may improve some aspects concerned security, comfort, efficiency and performance. In this process, Ergonomics had shown to be of essential importance to strategic decision making to the improvement of production section.

An ergonomic intervention to reduce musculoskeletal discomfort among semiconductor assembly workers.

PubMed

Aghilinejad, Mashallah; Azar, Neda Soleimanvandy; Ghasemi, Mohammad Sadegh; Dehghan, Naser; Mokamelkhah, Elahe Kabir

2016-06-14

Work-related musculoskeletal disorders (MSDs) and ergonomics-related injuries are the single largest category of workplace injuries and are responsible for almost 30% of all worker's compensation costs. Awkward working posture refers to positions of the body that deviate significantly from the neutral position while job tasks are being performed and it is the primary ergonomic risk factor for developing musculoskeletal discomfort. This study was conducted among assembly workers of a semiconductor in Tehran province with the objective of implementing an interventional ergonomic program to minimize musculoskeletal discomfort. This study that was conducted on 105 male assembly workers of a semiconductor industry based on a census method. The standardized Nordic Musculoskeletal Questionnaire (NMQ) was used to determine the prevalence of MSDs. Corlett and Bishop's body part discomfort scale (BPD) was applied to evaluate body discomfort before and after the intervention (using a magnifying loupes to improve visibility of the parts). The results of NMQ showed the highest rate of MSDs were in neck, shoulder, upper arm and lower back regions (more than 75%). After ergonomic intervention, significant decrements of discomfort was observed in neck, shoulder, upper arm, elbows, lower arm, lower back and whole body discomfort (p < 0.05). It can be concluded that using magnifying loupes reduced discomfort in different body regions and the whole body. A conclusion of this research is that ergonomic interventions can decrease MSDs of at risk body regions in the long term.

Part 1: Participatory Ergonomics Approach to Waste Container Handling Utilizing a Multidisciplinary Team

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zalk, D.M.; Tittiranonda, P.; Burastero, S.

2000-02-07

This multidisciplinary team approach to waste container handling, developed within the Grassroots Ergonomics process, presents participatory ergonomic interpretations of quantitative and qualitative aspects of this process resulting in a peer developed training. The lower back, shoulders, and wrists were identified as frequently injured areas, so these working postures were a primary focus for the creation of the workers' training. Handling procedures were analyzed by the team to identify common cycles involving one 5 gallon (60 pounds), two 5 gallons (60 and 54 pounds), 30 gallon (216 pounds), and 55 gallon (482 pounds) containers: lowering from transporting to/from transport vehicles, loading/unloadingmore » on transport vehicles, and loading onto pallet. Eleven experienced waste container handlers participated in this field analysis. Ergonomic exposure assessment tools measuring these field activities included posture analysis, posture targeting, Lumbar Motion Monitor{trademark} (LMM), and surface electromyography (sEMG) for the erector spinae, infraspinatus, and upper trapezius muscles. Posture analysis indicates that waste container handlers maintained non-neutral lower back postures (flexion, lateral bending, and rotation) for a mean of 51.7% of the time across all activities. The right wrist was in non-neutral postures (radial, ulnar, extension, and flexion) a mean of 30.5% of the time and the left wrist 31.4%. Non-neutral shoulder postures (elevation) were the least common, occurring 17.6% and 14.0% of the time in the right and left shoulders respectively. For training applications, each cycle had its own synchronized posture analysis and posture target diagram. Visual interpretations relating to the peak force modifications of the posture target diagrams proved to be invaluable for the workers' understanding of LMM and sEMG results (refer to Part II). Results were reviewed by the team's field technicians and their interpretations were developed into

Computer users' ergonomics and quality of life - evidence from a developing country.

PubMed

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan

2018-06-01

This study is aimed at investigating the quality of workplace ergonomics at various Pakistani organizations and quality of life of computer users working in these organizations. Two hundred and thirty-five computer users (only those employees who have to do most of their job tasks on computer or laptop, and at their office) responded by filling the questionnaire covering questions on workplace ergonomics and quality of life. Findings of the study revealed the ergonomics at those organizations was poor and unfavourable. The quality of life (both physical and mental health of the employees) of respondents was poor for employees who had unfavourable ergonomic environment. The findings thus highlight an important issue prevalent at Pakistani work settings.

Ergonomic Guidelines for Designing Effective and Healthy Learning Environments for Interactive Technologies.

ERIC Educational Resources Information Center

Weisberg, Michael

Many of the findings from ergonomics research on visual display workstations are relevant to the design of interactive learning stations. This 1993 paper briefly reviews ergonomics research on visual display workstations; specifically, (1) potential health hazards from electromagnetic radiation; (2) musculoskeletal disorders; (3)vision complaints;…

A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

PubMed

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

Ergonomic risk factors associated with clinical dentistry.

PubMed

Rucker, Lance M; Sunell, Susanne

2002-02-01

Ergonomics has formed an integral aspect of dental education at the University of British Columbia since the early 1980s. However, studies continued to indicate that dentists are at risk for developing musculoskeletal problems. This provided the impetus for a study of the risk factors associated with these problems. The data analyzed from 421 survey respondents in British Columbia indicate that indeed dentists are experiencing musculoskeletal pain and discomfort. However, the data also suggest that dentists can recognize and identify their own postures, practicing positions, and the equipment usage patterns that are associated with increased risks of experiencing musculoskeletal pain and discomfort. Such recognition is the first critical step to avoiding or neutralizing ergonomic habits and work environment layouts that might otherwise unnecessarily shorten professional clinical careers.

Casting an ergonomic eye on university libraries.

PubMed

Ferrer, Nicole; Villarouco, Vilma

2012-01-01

Research in the field of Ergonomics of the Built Environment has been developed with a view to consolidating studies in this area, the objective of which is to provide evidence that the joint participation of users and designers on drawing up projects is important. In this context, the theme of this study is to investigate the interactions between users and the environment in a university library. To do so, well-established techniques from Ergonomics, Architecture and Environmental Psychology were used to make a functional and behavioral evaluation to identify the level of user satisfaction in six libraries in the various study centers of the Federal University of Pernambuco in Recife, northeast Brazil, so as to identify the strengths and also weaknesses in these spatial structures.

Ergonomic assessment for the task of repairing computers in a manufacturing company: A case study.

PubMed

Maldonado-Macías, Aidé; Realyvásquez, Arturo; Hernández, Juan Luis; García-Alcaraz, Jorge

2015-01-01

Manufacturing industry workers who repair computers may be exposed to ergonomic risk factors. This project analyzes the tasks involved in the computer repair process to (1) find the risk level for musculoskeletal disorders (MSDs) and (2) propose ergonomic interventions to address any ergonomic issues. Work procedures and main body postures were video recorded and analyzed using task analysis, the Rapid Entire Body Assessment (REBA) postural method, and biomechanical analysis. High risk for MSDs was found on every subtask using REBA. Although biomechanical analysis found an acceptable mass center displacement during tasks, a hazardous level of compression on the lower back during computer's transportation was detected. This assessment found ergonomic risks mainly in the trunk, arm/forearm, and legs; the neck and hand/wrist were also compromised. Opportunities for ergonomic analyses and interventions in the design and execution of computer repair tasks are discussed.

Development of a Pamphlet Targeting Computer Workstation Ergonomics

NASA Technical Reports Server (NTRS)

Faraci, Jennifer S.

1997-01-01

With the increased use of computers throughout Goddard Space Flight Center, the Industrial Hygiene Office (IHO) has observed a growing trend in the number of health complaints attributed to poor computer workstation setup. A majority of the complaints has centered around musculoskeletal symptoms, including numbness, pain, and tingling in the upper extremities, shoulders, and neck. Eye strain and headaches have also been reported. In some cases, these symptoms can lead to chronic conditions such as repetitive strain injuries (RSI's). In an effort to prevent or minimize the frequency of these symptoms among the GSFC population, the IHO conducts individual ergonomic workstation evaluations and ergonomics training classes upon request. Because of the extensive number of computer workstations at GSFC, and the limited amount of manpower which the Industrial Hygiene staff could reasonably allocate to conduct workstation evaluations and employee training, a pamphlet was developed with a two-fold purpose: (1) to educate the GSFC population about the importance of ergonomically-correct computer workstation setup and the potential effects of a poorly configured workstation; and (2) to enable employees to perform a general assessment of their own workstations and make any necessary modifications for proper setup.

Technology meets ergonomics in the dental clinic: new toys for old games?

PubMed

Rucker, L M

2000-01-01

Although there have been considerable advances in dental equipment, the introduction of such technology has often been piecemeal and "rushed to market." As a result there has been insufficient attention paid to ergonomic considerations and a systematic approach to, and theory of, dental ergonomics have not yet emerged.

City transport of the future - the high speed pedestrian conveyor. Part 1: ergonomic considerations of accelerators, decelerators and transfer sections.

PubMed

Browning, A C

1974-12-01

In this article, an uncommon form of passenger transport is considered, the moving pavement or pedestrian conveyor running at speeds of up to 16 km/h. There are very little relevant ergonomic data for such devices and some specific laboratory experiments have been carried out using 1000 subjects to represent the general public. It is concluded that whilst high speed pedestrian conveyors are quite feasible, stations along them are likely to be large. The most attractive type is a set of parallel surfaces moving at different speeds and with handholds provided in the form of poles. This type could be extremely convenient for certain locations but will probably have to be restricted in its use to fairly fit adults carrying little luggage, and would find applications in situations where a large number of people need to travel in the same direction. Part 2, Ergonomic considerations of complete conveyor systems, will follow.

Ergonomics assessment of composite ballistic inserts for bullet- and fragment-proof vests.

PubMed

Majchrzycka, Katarzyna; Brochocka, Agnieszka; Luczak, Anna; Lężak, Krzysztof

2013-01-01

Personal protective equipment worn by uniformed services (e.g., the police and the military) must ensure protection against bodily injuries. However, a high degree of protection is always associated with significant discomfort. This article presents the results of an assessment of the ergonomics parameters of new special purpose products, ballistic inserts with improved ballistic resistance, and an assessment of the impact of the burden related to their use on the psychomotor performance of the subjects. An obstacle course and subjective ergonomics assessment questionnaires were used in tests. Thermal discomfort was also assessed. Psychological testing included tests enabling an assessment of the subjects' cognitive and psychomotor performance, and a subjective assessment of mental load. The tests did not show any decrease in the comfort of use of the new inserts with improved ballistic resistance compared to the inserts currently used.

Geometric dimension model of virtual astronaut body for ergonomic analysis of man-machine space system

NASA Astrophysics Data System (ADS)

Qianxiang, Zhou

2012-07-01

It is very important to clarify the geometric characteristic of human body segment and constitute analysis model for ergonomic design and the application of ergonomic virtual human. The typical anthropometric data of 1122 Chinese men aged 20-35 years were collected using three-dimensional laser scanner for human body. According to the correlation between different parameters, curve fitting were made between seven trunk parameters and ten body parameters with the SPSS 16.0 software. It can be concluded that hip circumference and shoulder breadth are the most important parameters in the models and the two parameters have high correlation with the others parameters of human body. By comparison with the conventional regressive curves, the present regression equation with the seven trunk parameters is more accurate to forecast the geometric dimensions of head, neck, height and the four limbs with high precision. Therefore, it is greatly valuable for ergonomic design and analysis of man-machine system.This result will be very useful to astronaut body model analysis and application.

The effect of a knowledge-based ergonomic intervention amongst administrators at Aga Khan University Hospital, Nairobi.

PubMed

Wanyonyi, Nancy; Frantz, Jose; Saidi, Hassan

2015-01-01

Low back pain (LBP) and neck pain are part of the common work-related musculoskeletal disorders with a large impact on the affected person. Despite having a multifactorial aetiology, ergonomic factors play a major role thus necessitating workers' education. To determine the prevalence of ergonomic-related LBP and neck pain, and describe the effect of a knowledge-based ergonomic intervention amongst administrators in Aga Khan University Hospital, Nairobi. This study applied a mixed method design utilizing a survey and two focus group discussions (FGD). A self-administered questionnaire was distributed to 208 participants through systematic sampling. A one hour knowledge-based ergonomic session founded on the survey results was thereafter administered to interested participants, followed by two FGDs a month later with purposive selection of eight participants to explore their experience of the ergonomic intervention. Quantitative data was captured and analyzed using SPSS by means of descriptive and inferential statistics, whereas thematic content analysis was used for qualitative data. Most participants were knowledgeable about ergonomic-related LBP and neck pain with a twelve month prevalence of 75.5% and 67.8% respectively. Continual ergonomic education is necessary for adherence to health-related behaviours that will preventwork-related LBP and neck pain.

Global drivers, sustainable manufacturing and systems ergonomics.

PubMed

Siemieniuch, C E; Sinclair, M A; Henshaw, M J deC

2015-11-01

This paper briefly explores the expected impact of the 'Global Drivers' (such as population demographics, food security; energy security; community security and safety), and the role of sustainability engineering in mitigating the potential effects of these Global Drivers. The message of the paper is that sustainability requires a significant input from Ergonomics/Human Factors, but the profession needs some expansion in its thinking in order to make this contribution. Creating a future sustainable world in which people experience an acceptable way of life will not happen without a large input from manufacturing industry into all the Global Drivers, both in delivering products that meet sustainability criteria (such as durability, reliability, minimised material requirement and low energy consumption), and in developing sustainable processes to deliver products for sustainability (such as minimum waste, minimum emissions and low energy consumption). Appropriate changes are already being implemented in manufacturing industry, including new business models, new jobs and new skills. Considerable high-level planning around the world is in progress and is bringing about these changes; for example, there is the US 'Advanced Manufacturing National Program' (AMNP)', the German 'Industrie 4.0' plan, the French plan 'la nouvelle France industrielle' and the UK Foresight publications on the 'Future of Manufacturing'. All of these activities recognise the central part that humans will continue to play in the new manufacturing paradigms; however, they do not discuss many of the issues that systems ergonomics professionals acknowledge. This paper discusses a number of these issues, highlighting the need for some new thinking and knowledge capture by systems ergonomics professionals. Among these are ethical issues, job content and skills issues. Towards the end, there is a summary of knowledge extensions considered necessary in order that systems ergonomists can be fully

Ergonomics intervention on an alternative design of a spinal board.

PubMed

Zadry, Hilma Raimona; Susanti, Lusi; Rahmayanti, Dina

2017-09-01

A spinal board is the evacuation tool of first aid to help the injured spinal cord. The existing spinal board has several weaknesses, both in terms of user comfort and the effectiveness and efficiency of the evacuation process. This study designs an ergonomic spinal board using the quality function deployment approach. A preliminary survey was conducted through direct observation and interviews with volunteers from the Indonesian Red Cross. Data gathered were translated into a questionnaire and answered by 47 participants in West Sumatra. The results indicate that the selection of materials, the application of strap systems as well as the addition of features are very important in designing an ergonomic spinal board. The data were used in designing an ergonomic spinal board. The use of anthropometric data ensures that this product can accommodate safety and comfort when immobilized, as well as the flexibility and speed of the rescue evacuation process.

Ergonomics, automation and logistics: practical and effective combination of working methods, a case study of a baking company.

PubMed

Quintana, Leonardo; Arias, Claudia; Cordoba, Jorge; Moroy, Magda; Pulido, Jean; Ramirez, Angela

2012-01-01

The aim of this study was to combine three different analytical methods from three different disciplines to diagnose the ergonomic conditions, manufacturing and supply chain operation of a baking company. The study explores a summary of comprehensive working methods that combines the ergonomics, automation and logistics study methods in the diagnosis of working conditions and productivity. The participatory approach of this type of study that involves the feelings and first-hand knowledge of workers of the operation are determining factors in defining points of action and ergonomic interventions, as well as defining opportunities in the automation of manufacturing and logistics, to cope with the needs of the company. The study identified an ergonomic situation (high prevalence of wrist-hand pain), and the combination of interdisciplinary techniques applied allowed to improve this condition in the company. This type of study allows a primary basis of the opportunities presented by the combination of specialized methods of different disciplines, for the definition of comprehensive action plans for the company. Additionally, it outlines opportunities for improvement and recommendations to mitigate the burden associated with occupational diseases and as an end result improve the quality of life and productivity of workers.

Ergonomic analysis of construction worker's body postures using wearable mobile sensors.

PubMed

Nath, Nipun D; Akhavian, Reza; Behzadan, Amir H

2017-07-01

Construction jobs are more labor-intensive compared to other industries. As such, construction workers are often required to exceed their natural physical capability to cope with the increasing complexity and challenges in this industry. Over long periods of time, this sustained physical labor causes bodily injuries to the workers which in turn, conveys huge losses to the industry in terms of money, time, and productivity. Various safety and health organizations have established rules and regulations that limit the amount and intensity of workers' physical movements to mitigate work-related bodily injuries. A precursor to enforcing and implementing such regulations and improving the ergonomics conditions on the jobsite is to identify physical risks associated with a particular task. Manually assessing a field activity to identify the ergonomic risks is not trivial and often requires extra effort which may render it to be challenging if not impossible. In this paper, a low-cost ubiquitous approach is presented and validated which deploys built-in smartphone sensors to unobtrusively monitor workers' bodily postures and autonomously identify potential work-related ergonomic risks. Results indicates that measurements of trunk and shoulder flexions of a worker by smartphone sensory data are very close to corresponding measurements by observation. The proposed method is applicable for workers in various occupations who are exposed to WMSDs due to awkward postures. Examples include, but are not limited to industry laborers, carpenters, welders, farmers, health assistants, teachers, and office workers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sources and Nature of Secondary School Teachers' Education in Computer-Related Ergonomics

ERIC Educational Resources Information Center

Dockrell, Sara; Fallon, Enda; Kelly, Martina; Galvin, Rose

2009-01-01

Teachers' knowledge of computer-related ergonomics in education will have an effect on the learning process and the work practices of their students. However little is known about teacher education in this area. The study aimed to investigate the sources and nature of secondary school teachers' education about computer-related ergonomics. It also…

[Ergonomic analysis of the handle of manual instruments for dental hygiene].

PubMed

Migliario, Mario; Franchignoni, Marco; Soldati, Libero; Melle, Andrea; Carcieri, Paola; Ferriero, Giorgio

2012-01-01

Work-related musculoskeletal disorders of upper limbs are very common among dental hygienists. To minimize the risk of their occurrence, it is essential that attention be paid to proper ergonomics in the workplace, including the selection of instrumentation. At present there are no specific guidelines but only some indications for the selection of the different hand tools. The main purpose of this study was to make a comparative analysis of different types of handles of hand tools used for root planing (Gracey curettes). Nine dental hygienists were interviewed with a questionnaire aimed to assess three different types of curette handle. The results showed that lightness, being of solid steel, having a cylindrical non-uniform shape with full enlarged cross-section, and being silicon coated with non-slip ends are the preferred characteristics for a curette handle. These considerations may assist both manufacturers in designing new hand instruments and clinicians in selecting the most ergonomic ones to buy.

A User Assessment of Workspaces in Selected Music Education Computer Laboratories.

ERIC Educational Resources Information Center

Badolato, Michael Jeremy

A study of 120 students selected from the user populations of four music education computer laboratories was conducted to determine the applicability of current ergonomic and environmental design guidelines in satisfying the needs of users of educational computing workspaces. Eleven categories of workspace factors were organized into a…

Exposure level of ergonomic risk factors in hotel industries

NASA Astrophysics Data System (ADS)

Nasrull Abdol Rahman, Mohd; Syahir Muhamad Jaffar, Mohd; Fahrul Hassan, Mohd; Zamani Ngali, Mohd; Pauline, Ong

2017-08-01

Ergonomic Risk Factors (ERFs) which contribute to Musculoskeletal Disorders (MSDs) among room attendants were considered as a problem or trouble since these ERFs would affect their work performance for hotel industries. The purpose of this study was to examine the exposure level of ERFs among room attendants in hotel industries. 65 of respondents were obtained from selected hotels in Peninsular Malaysia. Data were collected by direct observation via Workplace Ergonomic Risk Assessment (WERA) and Quick Exposure Checklist (QEC). There were 36 males and 29 females room attendants involved throughout the research. Most of room attendants experienced high exposure level for back, leg, forceful and vibration based on the exposure level evaluation through WERA while QEC results showed that all room attendants were found to have moderate exposure level for risk factors including back for movement use, shoulders/arms, wrists/hands and neck. All the results obtained showed that the related ERFs for MSDs were associated and essential ergonomic interventions are needed in order to eliminate risk of exposures to MSDs among room attendants in hotel industries.

Ergonomic initiatives at Inmetro: measuring occupational health and safety.

PubMed

Drucker, L; Amaral, M; Carvalheira, C

2012-01-01

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

Quantum ergonomics: shifting the paradigm of the systems agenda.

PubMed

Walker, Guy H; Salmon, Paul M; Bedinger, Melissa; Stanton, Neville A

2017-02-01

A paradigm is an accepted world view. If we do not continually question our paradigm then wider trends and movements will overtake the discipline leaving it ill adapted to future challenges. This Special Issue is an opportunity to keep systems thinking at the forefront of ergonomics theory and practice. Systems thinking prompts us to ask whether ergonomics, as a discipline, has been too timid? Too preoccupied with the resolution of immediate problems with industrial-age methods when, approaching fast, are developments which could render these operating assumptions an irrelevance. Practical case studies are presented to show how abstract systems problems can be tackled head-on to deliver highly innovative and cost-effective insights. The strategic direction of the discipline foregrounds high-quality systems problems. These are something the discipline is well able to respond to provided that the appropriate operating paradigms are selected. Practitioner Summary: High-quality systems problems are the future of the discipline. How do we convert obtuse sounding systems concepts into practical interventions? In this paper, the essence of systems thinking is distilled and practical case studies used to demonstrate the benefits of this new paradigm.

Ergonomics and safety in secondary wood processing

Treesearch

Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih

2002-01-01

The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.

Ergonomic problems encountered by the surgical team during video endoscopic surgery.

PubMed

Kaya, Oskay I; Moran, Munevver; Ozkardes, Alper B; Taskin, Emre Y; Seker, Gaye E; Ozmen, Mahir M

2008-02-01

The aim of this study is to analyze the problems related to the ergonomic conditions faced by video endoscopic surgical teams during video endoscopic surgery by means of a questionnaire. A questionnaire was distributed to 100 medical personnel, from 8 different disciplines, who performed video endoscopic surgeries. Participants were asked to answer 13 questions related to physical, perceptive, and cognitive problems. Eighty-two questionnaires were returned. Although there were differences among the disciplines, participants assessment of various problems ranged from 32% to 72% owing to poor ergonomic conditions. As the problems encountered by the staff during video endoscopic surgery and the poor ergonomic conditions of the operating room affect the productivity of the surgical team and the safety and efficiency of the surgery, redesigning of the instruments and the operating room is required.

[Evaluation of ergonomic load of clinical nursing procedures].

PubMed

Yan, P; Zhang, L; Li, F Y; Yang, Y; Wang, Y N; Huang, A M; Dai, Y L; Yao, H

2017-08-20

Objective: To evaluate the ergonomic load of clinical nursing procedures and to provide evidence for the prevention and management of work-related musculoskeletal disorders (WMSDs) in nurses. Methods: Based on the nursing unit characteristics and the common departments involving patient-turning procedures, 552 nurses were selected from 6 clinical departments from July to September, 2016. The ergonomic load of four types of patient-turning procedures, i.e., turning the patient's body, changing the bed linen of in-bed patients, moving patients, and chest physiotherapy, was evaluated by the on-site inspectors and self-evaluated by the operators using the Quick Exposure Check. The exposure value, exposure level, and exposure rate of WMSDs were assessed based on the procedure-related physical loads on the back, shoulders/arms, wrists/hands and neck, as well as the loads from work rhythm and work pressure. Results: All surveyed subjects were females who were aged mostly between 26-30 years (49.46%) , with a mean age of 29.66±5.28 years. These nurses were mainly from the Department of Infection (28.99%) and Spine Surgery (21.56%) . There were significant differences in the back, shoulders/arms, neck, work rhythm, and work pressure scores between different nursing procedures ( F =16.613, 5.884, 3.431, 3.222, and 5.085, respectively; P <0.05) . Patient-turning nursing procedures resulted in high to intermediate physical load in nurses. Procedures with high to low level of WMSDs exposure were patient turning (72.69%) , bed linen changing (67.15%) , patient transfer (65.82%) , and chest physiotherapy (58.34%) . In particular, patient turning was considered as very high-risk procedure, whereas others were considered as high-risk procedures. Conclusion: Patient-turning nursing procedures result in high ergonomic load in the operators. Therefore, more focus should be placed on the ergonomics of the caretakers and nurses.

Introduction to ergonomics for healthcare workers.

PubMed

Waters, Thomas R

2010-01-01

Healthcare workers who handle and move patients as part of their jobs suffer a disproportionately high number of work-related musculoskeletal disorders (MSDs). The majority of reported work-related MSDs are back pain cases that result in significant numbers of lost work days. It is likely that these lost workdays have a substantial impact on the quality and cost of health care. Patient care ergonomics can reduce the risk of work-related MSDs by helping safety experts design the work so it can be safely performed by most workers. This article provides a general overview of ergonomics--what it is, how it can be used to help design safe work, and why all healthcare workers and administrators should know and understand how excessive work demands can lead to increased risk of work-related MSDs. The article will also explain technological solutions that can be implemented to reduce the risk of work-related MSDs for healthcare workers.

An ergonomic evaluation of manual Cleco plier designs: effects of rubber grip, spring recoil, and worksurface angle.

PubMed

You, Heecheon; Kumar, Anil; Young, Ronda; Veluswamy, Prabaharan; Malzahn, Don E

2005-09-01

The present study evaluated two design modifications (rubber grip and torsion spring) to the conventional manual Cleco pliers by electromyography (EMG), hand discomfort, and design satisfaction. This study also surveyed workers' satisfaction with selected design features of the pliers for ergonomic improvement. A two-way (plier design x worksurface angle) within-subject (nested within gender and hand size) design was employed. Eleven workers simulated the plier task in an adjustable workstation for different plier designs and worksurface angles (0 degrees , 60 degrees , and 90 degrees ). Lower EMG values were obtained for the pliers with rubber grip and at 60 degrees of worksurface angle. EMG values varied significantly between the participants, but showed low correlations (Spearman's rank correlation = -0.27 approximately -0.58) with their work experience with the pliers. The hand discomfort and design satisfaction evaluations identified that the grip span (max = 14.0 cm) and grip force requirement (peak = 220.5 N) of the current pliers need ergonomic modification. The present study shows the needs of both the ergonomic design of a hand tool and the training of a proper work method to control work-related musculoskeletal disorders at the workplace.

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

PubMed

Andersen, Simone Nyholm; Broberg, Ole

2015-11-01

Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

An Assessment of Student Computer Ergonomic Knowledge.

ERIC Educational Resources Information Center

Alexander, Melody W.

1997-01-01

Business students (n=254) were assessed on their knowledge of computers, health and safety, radiation, workstations, and ergonomic techniques. Overall knowledge was low in all categories. In particular, they had not learned computer-use techniques. (SK)

Workstation Analysis, Ergonomic Style: Don't Despair, Teaching Ergonomic Workstation Analysis Isn't That Tough; but You Need a Plan.

ERIC Educational Resources Information Center

Merrell, Wayne L.; Zeimet, Denis E.

1994-01-01

Lists 15 principles for working safely with equipment. Describes phases of an ergonomic hazards program to identify and prevent problems and causes of cumulative trauma disorders in the workplace. (SK)

Ergonomics and Health Care

DTIC Science & Technology

1994-01-01

consumer ergonomic principles in individual patient treat- products; participating in activities of daily living ment and education, but they have not...psychosocial impacts of illness. Although mists are well aware of the need for implementa- the focus of health care professionals is on patient tion of...h t, a rt icle p rot videe a brief h i ctory’ ol the field of ers,’onomfnicc and explorete the interrelationship beta ee health (tare andi ergjonomic

Cultural ergonomics in interactional and experiential design: conceptual framework and case study of the Taiwanese twin cup.

PubMed

Lin, Chih-Long; Chen, Si-Jing; Hsiao, Wen-Hsin; Lin, Rungtai

2016-01-01

Cultural ergonomics is an approach that considers interaction- and experience-based variations among cultures. Designers need to develop a better understanding of cultural ergonomics not just to participate in cultural contexts but also to develop interactive experiences for users. Cultural ergonomics extends our understanding of cultural meaning and our ability to utilize such understanding for design and evaluate everyday products. This study aims to combine cultural ergonomics and interactive design to explore human-culture interaction in user experiences. The linnak is a typical Taiwanese aboriginal cultural object. This study examined the cultural meaning and operational interface of the linnak, as well as the scenarios in which it is used in interaction and user experiences. The results produced a cultural ergonomics interface for examining the manner in which designers communicate across cultures as well as the interweaving of design and culture in the design process. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Kaizen and ergonomics: the perfect marriage.

PubMed

Rodriguez, Martin Antonio; Lopez, Luis Fernando

2012-01-01

This paper is an approach of how Kaizen (Continuous Improvement) and Ergonomics could be implemented in the field of work. The Toyota's Team Members are the owners of this job, applying tools and techniques to improve work conditions using the Kaizen Philosophy in a QCC Activity (Quality Control Circle).

Human Sensibility Ergonomics Approach to Vehicle Simulator Based on Dynamics

NASA Astrophysics Data System (ADS)

Son, Kwon; Choi, Kyung-Hyun; Yoon, Ji-Sup

Simulators have been used to evaluate drivers' reactions to various transportation products. Most research, however, has concentrated on their technical performance. This paper considers driver's motion perception on a vehicle simulator through the analysis of human sensibility ergonomics. A sensibility ergonomic method is proposed in order to improve the reliability of vehicle simulators. A simulator in a passenger vehicle consists of three main modules such as vehicle dynamics, virtual environment, and motion representation modules. To evaluate drivers' feedback, human perceptions are categorized into a set verbal expressions collected and investigated to find the most appropriate ones for translation and angular accelerations of the simulator. The cut-off frequency of the washout filter in the representation module is selected as one sensibility factor. Sensibility experiments were carried out to find a correlation between the expressions and the cut-off frequency of the filter. This study suggests a methodology to obtain an ergonomic database that can be applied to the sensibility evaluation of dynamic simulators.

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

A hand-ergonomics training kit: development and evaluation of a package to support improved awareness and critical thinking.

PubMed

Garmer, Karin; Sperling, Lena; Forsberg, Anette

2002-01-01

A need for a hand-ergonomics training kit has been identified to increase critical thinking concerning choice of hand tools. This study deals with the design, use and evaluation of a hand-ergonomics training kit for use in ergonomics training programmes. The effects on awareness of hand ergonomics among training course participants have been evaluated by means of a questionnaire and interviews at a car production plant in Sweden. The evaluation was carried out about one and a half years after training with the hand-ergonomics training kit. The training kit consists of a guide to practical exercises, equipment for measuring hand size and strength, examples of hand tools for use in practical exercises, equipment for testing and evaluating the hand tools and checklists and judgement forms for qualitative evaluation. In addition, the kit contains relevant scientifically based reference reports on hand ergonomics. The evaluation showed that the practical exercises with the hand-ergonomic training kit had, to a remarkable extent, increased individuals' awareness of anthropometric differences and of the importance of ergonomically well-designed hand tools. After the practical exercises with the training kit, communication within the plant when choosing hand tools seems to be based on objective criteria to a higher degree, however, the results indicate that this communication could be further improved.

Effective Office Ergonomics Awareness: Experiences from Global Corporates.

PubMed

Madhwani, Kishore P; Nag, P K

2017-01-01

Use of laptops and hand-held devices increase the risk of musculoskeletal disorders (MSDs). More time spent on this activity adopting faulty postures, higher the risk of developing such injuries. This study addresses training on office ergonomics with emphasis on sustainable behavior change among employees to work in safe postures, as this is a top priority in the corporate environment, today. To explore training intervention methods that ensure wider coverage of awareness on office ergonomics, thereby promoting safer working and suggesting sustainable programs for behavior change and job enrichment. A cross-sectional study was conducted (2012 - 2017), encompassing corporate office employees of multinational corporations selected from India, Dubai (U.A.E), Nairobi (East Africa), Durban (South Africa), South East Asian countries (Philippines, Vietnam, Indonesia, Singapore, Malaysia, Thailand and Sri Lanka).Participant employees ( n = 3503) were divided into two groups to study the effect of interventions'; i.e., (a) deep training: 40 minute lecture by the investigator with a power point presentation ( n = 1765) using a mock workstation and (b) quick training: live demonstrations of 10 minutes ( n = 1738) using a live workstation. While deep training enhanced awareness in 95.51% and quick training in 96.59% globally, the latterwas much appreciated and educated maximum employees. From statistical analysis, quick training was found superior in providing comprehensive training and influencing behavior modification in India, but all over the world it was found highly superior in knowledge enlargement, skills enrichment in addition to providing comprehensive training ( P < 0.05). In countries, located to West of India, it significantly influenced behavior modification. As because few employees attend deep training lectures, the quick 10-minute program is highly promising as it is practical, replicable, yields increased awareness with wider employee coverage in a much

The effectiveness of physical and organisational ergonomic interventions on low back pain and neck pain: a systematic review.

PubMed

Driessen, Maurice T; Proper, Karin I; van Tulder, Maurits W; Anema, Johannes R; Bongers, Paulien M; van der Beek, Allard J

2010-04-01

Ergonomic interventions (physical and organisational) are used to prevent or reduce low back pain (LBP) and neck pain among workers. We conducted a systematic review of randomised controlled trials (RCTs) on the effectiveness of ergonomic interventions. A total of 10 RCTs met the inclusion criteria. There was low to moderate quality evidence that physical and organisational ergonomic interventions were not more effective than no ergonomic intervention on short and long term LBP and neck pain incidence/prevalence, and short and long term LBP intensity. There was low quality evidence that a physical ergonomic intervention was significantly more effective for reducing neck pain intensity in the short term (ie, curved or flat seat pan chair) and the long term (ie, arm board) than no ergonomic intervention. The limited number of RCTs included make it difficult to answer our broad research question and the results should be interpreted with care. This review, however, provides a solid overview of the high quality epidemiological evidence on the (usually lack of) effectiveness of ergonomic interventions on LBP and neck pain.

Ergonomics perspective for identifying and reducing internal operative flow disruption for laparoscopic urological surgery.

PubMed

Al-Hakim, Latif; Xiao, Jiaquan; Sengupta, Shomik

2017-12-01

The aim of this study is to examine operative flow disruption that occurs inside the surgical field, (internal operative flow disruption (OFD)), during urological laparoscopies, and to relate those events to external ergonomics environment in terms of monitor location, level of instruments' handles, and location of surgical team members. According to the our best knowledge, this is the first study of its kind. A combination of real and video-aided observational study was conducted in the operating rooms at hospitals in Australia and China. Brain storming sessions were first conducted to identify the main internal OFD events, and the observable reasons, potential external, and latent ergonomic factors were listed. A prospective observational study was then conducted. The observer's records and the related video records of internal surgical fields were analysed. Procedures were categorised into groups based on similarity in ergonomics environment. The mapping process revealed 39 types of internal OFD events resulted from six reasons. A total of 24 procedures were selected and arranged into two groups, each with twelve procedures. Group A was carried out under satisfactory ergonomics environment, while Group B was conducted under unsatisfactory ergonomics environment. A total of 1178 OFD events were detected delaying the total observed operative times (2966 min) by 220 min (7.43%). Average OFD/h in group A was less than 15, while in group B about 29 OFD/h. There are two main latent ergonomics factors affecting the surgeon's performance; non-physiological posture and long-period static posture. The delays and number of internal OFD were nearly doubled where procedures were conducted under unsatisfactory external ergonomics environment. Some events such as stopping operation and irrelevant conversations during long procedures may have a positive influence on the surgeon's performance.

Ergonomics in gynecologists' daily practice: A nationwide survey in The Netherlands.

PubMed

Alleblas, Chantal C J; Formanoy, Margriet A G; Könemann, Reinier; Radder, Celine M; Huirne, Judith A; Nieboer, Theodoor E

2016-01-01

Gynecologists are exposed to multiple risk factors for developing physical complaints. To enhance the workplace ergonomics in gynecological practice, a more detailed insight about job content and associated demands is necessary to subsequently decrease the exposure to risk factors. The aim of this study was to investigate the prevalence of physical complaints and the presence of ergonomic constraints in Dutch gynecological practice. A questionnaire was distributed among the 1200 members of the Dutch Society of Obstetrics and Gynecology. It consisted of 52 Dutch questions derived from the validated Dutch Musculoskeletal Questionnaire. A total of 227 respondents completed the questionnaire (response rate 18.9%). Overall, 99.5% of the respondents rated their health status as reasonable or good. However, the twelve-month prevalence of physical complaints in one or more body part was 89.4%. Sustained adverse body postures were particularly reported for performing abdominal, and endoscopic surgery, and for assisting in vaginal surgery. Limited workspace, instruments, and patient size were reported by more than 60% of the respondents as constraints for adopting a neutral body posture during vaginal, endoscopic and abdominal surgery respectively. The results emphasize the necessity of enhancing ergonomics in gynecological practice. Better ergonomic circumstances will most likely benefit both the health of the gynecologists as well as the quality of surgical care.

Ergonomic factors and production target evaluation in eucalyptus timber harvesting operations in mountainous terrains.

PubMed

de Souza, Amaury Paulo; Minette, Luciano José; Sanches, André Luis Petean; da Silva, Emília Pio; Rodrigues, Valéria Antônia Justino; de Oliveira, Luciana Aparecida

2012-01-01

There are several forest operations involved in Eucalyptus timber harvesting. This study was carried out during brush-cutting; tree felling, bucking, delimbing, piling and manual extraction operations, with the following objectives: a) analyzing, ergonomically, two systems of brush-cutting: one manual and the other semi-mechanized, using two different machines; b) ergonomically evaluating three different brands of pruner machines used in delimbing felled trees. c) determining the feasible target of productivity as a function of ergonomic factors relevant to establish the time of resting pauses for workers in manual and semi-mechanized timber harvesting systems in mountainous terrain. Brush-cutting, either manual or semimechanized, is an activity carried out prior to timber harvesting. It is usually a hard work, with low productivity when compared with mechanized systems. Pruner machines have been used by forest companies, due to the great possibilities to improve productivity, quality and the health of workers. Ergonomics is a discipline that promotes the adequacy of work to the physical and mental characteristics of human beings, seeking to design production systems and products considering relevant aspects, including social, organizational and environmental factors. Companies should consider the ergonomic factor in the determination of daily worker production targets.

Identification of ergonomics interventions used to reduce musculoskeletal loading for building installation tasks.

PubMed

Albers, Jim; Estill, Cherie; MacDonald, Leslie

2005-07-01

Skilled workers in the mechanical and electrical installation (M/EI) building and construction trades experience high rates of disabling work-related musculoskeletal disorders (WMSDs). The M/EI trades involve installing piping; heating, ventilation and air conditioning (HVAC), and electrical systems in residential, commercial, and industrial buildings. In the absence of an ergonomics standard in the United States, some building and construction contractors, including M/EI sector contractors, have implemented various ergonomics interventions on their worksites on a voluntary basis. However, no data were available to determine the type of voluntary control measures being implemented, the task-specific hazards for which control measures needed to be developed or refined, and perceived barriers to improving hazard control. As part of a larger effort to obtain this data, the National Institute for Occupational Safety and Health (NIOSH) organized a stakeholder meeting to gather information regarding ergonomics interventions or "best practices" by M/EI contractors and tradespeople. The attendees included 39 industry representatives, 17 construction ergonomics researchers from government and academia, and four ergonomics consultants with experience in the construction industry. Participants spent more than 50% of time meeting in small trade-specific breakout sessions. According to the participants, tasks common to the three trades included (1) drill holes and shoot fasteners; (2) place and install systems, and (3) lift and carry materials and equipment. Engineering interventions described in the stakeholder meeting included tools, equipment, and engineered building materials; administrative controls largely consisted of training and education programs and modifications of work and management practice. Most participants believed that there were significant limits to the impact individual contractors and tradespeople could have in leading ergonomics improvement in the

Study on functional relationships between ergonomics indexes of manual performance

NASA Astrophysics Data System (ADS)

Hu, Hui-Min; Ding, Li; Chen, Shou-Ping; Yang, Chun-Xin; Yuan, Xiu-Gan

This paper investigates functional relationships between some of the key ergonomics indexes in manual performance, and attempts to condense the ergonomics appraisal indexes system and thus evaluate hand performance wearing EVA (extravehicular activity) glove, design and improve EVA glove's performance. Four types of ergonomics indexes were studied, i.e., dexterity, tactile sensibility (TS), strength and fatigue. Two test items of insert sticks into a holes-board (ISIHB) and nuts-bolts assembly task (NBAT) were used to measure dexterity, while shape discrimination (SD) was employed for TS, and grip force (GF) for strength and fatigue. The variables measured in this investigation included accomplishing time (AT) of ISIHB and NBAT, correct rate (CR) of SD, maximal grip force (MGF), instant grip force (IGF) and endurance time of grip force (ETGF). Experiments were conducted on 31 undergraduates (eight female and 23 male) with two experiment conditions of bare-hand group and gloved hand group. Results demonstrated that dexterity and TS performance of gloved hand group declined significantly compared with those of bare-hand group (p<0.001). There were not significant differences in strength and fatigue between two conditions (p>0.05). Four effective functional relationships were developed between four pairs of ergonomics indexes in bare-hand group. In gloved hand group, in addition to above-mentioned four pairs of relationships, another formula was found, which was y^=0.02061+0.01233x ( p<0.01, dexterity and TS).

The state of ergonomics for mobile computing technology.

PubMed

Dennerlein, Jack T

2015-01-01

Because mobile computing technologies, such as notebook computers, smart mobile phones, and tablet computers afford users many different configurations through their intended mobility, there is concern about their effects on musculoskeletal pain and a need for usage recommendations. Therefore the main goal of this paper to determine which best practices surrounding the use of mobile computing devices can be gleaned from current field and laboratory studies of mobile computing devices. An expert review was completed. Field studies have documented various user configurations, which often include non-neutral postures, that users adopt when using mobile technology, along with some evidence suggesting that longer duration of use is associated with more discomfort. It is therefore prudent for users to take advantage of their mobility and not get stuck in any given posture for too long. The use of accessories such as appropriate cases or riser stands, as well as external keyboards and pointing devices, can also improve postures and comfort. Overall, the state of ergonomics for mobile technology is a work in progress and there are more research questions to be addressed.

Ergonomics for Children and Educational Environments - Around the World

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C L; Tien, D

2003-06-25

This paper briefly reviews activities and research related to children and educational environments. The increasing prevalence and role of information and communications technology in the lives of children as well as the incidence of back pain and heavy loads children carry in back packs are raising concerns around the world. Out of this concern an International Ergonomics Association Technical Committee has been formed. A survey was sent to Ergonomics for Children and Educational Environments membership and those who have communicated through the committee. The results are compiled to describe a cross-section of international efforts to address the health and themore » future of children.« less

Colossal Tooling Design: 3D Simulation for Ergonomic Analysis

NASA Technical Reports Server (NTRS)

Hunter, Steve L.; Dischinger, Charles; Thomas, Robert E.; Babai, Majid

2003-01-01

The application of high-level 3D simulation software to the design phase of colossal mandrel tooling for composite aerospace fuel tanks was accomplished to discover and resolve safety and human engineering problems. The analyses were conducted to determine safety, ergonomic and human engineering aspects of the disassembly process of the fuel tank composite shell mandrel. Three-dimensional graphics high-level software, incorporating various ergonomic analysis algorithms, was utilized to determine if the process was within safety and health boundaries for the workers carrying out these tasks. In addition, the graphical software was extremely helpful in the identification of material handling equipment and devices for the mandrel tooling assembly/disassembly process.

Ergonomic design in the operating room: information technologies

NASA Astrophysics Data System (ADS)

Morita, Mark M.; Ratib, Osman

2005-04-01

The ergonomic design in the Surgical OR of information technology systems has been and continues to be a large problem. Numerous disparate information systems with unique hardware and display configurations create an environment similar to the chaotic environments of air traffic control. Patient information systems tend to show all available statistics making it difficult to isolate the key, relevant vitals for the patient. Interactions in this sterile environment are still being done with the traditional keyboard and mouse designed for cubicle office workflows. This presentation will address the shortcomings of the current design paradigm in the Surgical OR that relate to Information Technology systems. It will offer a perspective that addresses the ergonomic deficiencies and predicts how future technological innovations will integrate into this vision. Part of this vision includes a Surgical OR PACS prototype, developed by GE Healthcare Technologies, that addresses ergonomic challenges of PACS in the OR that include lack of portability, sterile field integrity, and UI targeted for diagnostic radiologists. GWindows (gesture control) developed by Microsoft Research and Voice command will allow for the surgeons to navigate and review diagnostic imagery without using the conventional keyboard and mouse that disrupt the integrity of the sterile field. This prototype also demonstrates how a wireless, battery powered, self contained mobile PACS workstation can be optimally positioned for a surgeon to reference images during an intervention as opposed to the current pre-operative review. Lessons learned from the creation of the Surgical OR PACS Prototype have demonstrated that PACS alone is not the end all solution in the OR. Integration of other disparate information systems and presentation of this information in simple, easy to navigate information packets will enable smoother interactions for the surgeons and other healthcare professionals in the OR. More intuitive

Digital vibration threshold testing and ergonomic stressors in automobile manufacturing workers: a cross-sectional assessment.

PubMed

Gold, J E; Punnett, L; Cherniack, M; Wegman, D H

2005-01-01

Upper extremity musculoskeletal disorders (UEMSDs) comprise a large proportion of work-related illnesses in the USA. Physical risk factors including manual force and segmental vibration have been associated with UEMSDs. Reduced sensitivity to vibration in the fingertips (a function of nerve integrity) has been found in those exposed to segmental vibration, to hand force, and in office workers. The objective of this study was to determine whether an association exists between digital vibration thresholds (VTs) and exposure to ergonomic stressors in automobile manufacturing. Interviews and physical examinations were conducted in a cross-sectional survey of workers (n = 1174). In multivariable robust regression modelling, associations with workers' estimates of ergonomic stressors stratified on tool use were determined. VTs were separately associated with hand force, vibration as felt through the floor (whole body vibration), and with an index of multiple exposures in both tool users and non-tool users. Additional associations with contact stress and awkward upper extremity postures were found in tool users. Segmental vibration was not associated with VTs. Further epidemiologic and laboratory studies are needed to confirm the associations found. The association with self-reported whole body vibration exposure suggests a possible sympathetic nervous system effect, which remains to be explored.

Reducing work-related Musculoskeletal Disorders (MSDs) through design: Views of ergonomics and design practitioners.

PubMed

Punchihewa, Himan K G; Gyi, Diane E

2015-01-01

Work-related Musculoskeletal Disorders (MSDs) affect the well-being of workers. Unfortunately, user requirements for design to reduce workplace risk factors for MSDs are not always effectively communicated to designers creating a mismatch between the user requirements and what is ultimately produced. To understand the views of practitioners of design and ergonomics regarding tools for participatory design and features they would like to see in such tools. An online questionnaire survey was conducted with a cohort of practitioners of ergonomics and design (n = 32). In-depth interviews were then conducted with a subset of these practitioners (n = 8). To facilitate discussion, a prototype integrated design tool was developed and demonstrated to practitioners using a verbalized walkthrough approach. According to the results of the questionnaire survey, the majority (70%) believed an integrated approach to participatory design would help reduce work-related MSDs and suggested ways to achieve this, for example, through sharing design information. The interviews showed the majority (n = 7) valued being provided with guidance on design activities and ways to manage and present information. It is believed that an integrated approach to design in order to help reduce work-related MSDs is highly important and a provision to evaluate design solutions would be desirable for practitioners of design and ergonomics.

Visual ergonomics and computer work--is it all about computer glasses?

PubMed

Jonsson, Christina

2012-01-01

The Swedish Provisions on Work with Display Screen Equipment and the EU Directive on the minimum safety and health requirements for work with display screen equipment cover several important visual ergonomics aspects. But a review of cases and questions to the Swedish Work Environment Authority clearly shows that most attention is given to the demands for eyesight tests and special computer glasses. Other important visual ergonomics factors are at risk of being neglected. Today computers are used everywhere, both at work and at home. Computers can be laptops, PDA's, tablet computers, smart phones, etc. The demands on eyesight tests and computer glasses still apply but the visual demands and the visual ergonomics conditions are quite different compared to the use of a stationary computer. Based on this review, we raise the question if the demand on the employer to provide the employees with computer glasses is outdated.

[Ergonomic risk assessment: aspects applicable in the light of current standards].

PubMed

Baracco, A; Perrelli, F; Romano, C

2010-01-01

The Italian decree law 81/2008 mentions the application of ergonomic principles as a basic tool for the prevention. In this regulation we can not find the definition either of Ergonomics nor of the competences required for its correct application. The Authors consider that occupational physicians have a suitable competence and knowledge on the matter, thanks to their highly specialized training. Actually, the ergonomic doctrine shows up in the daily practice of occupational physicians, who regularly base their activity on the evaluation of the binomial "worker-task": in the management of fitness to work judgements they try to combine operating conditions with worker's psychophysical state, not confining themselves to a simple expression ofa medico-legal certificate. However, the legislative references to specific regulations raise difficulties to occupational physicians in dealing with aspects such as gender, age, reference values and methodological choices. The Authors debate these difficulties in the application of rules.

The impact of ergonomic work environment exposures on the risk of disability pension: Prospective results from DWECS/DREAM.

PubMed

Labriola, Merete; Feveile, Helene; Christensen, Karl B; Strøyer, Jesper; Lund, Thomas

2009-11-01

The objectives were to identify the impact of ergonomic work environment exposures on the risk of disability pension. A representative sample of 8475 employees of the total working population in Denmark were interviewed regarding work environment exposures and followed in a national register with data on granted disability pension. For women, approximately 34% of the disability pension cases were attributable to ergonomic work environment exposures. For men, 21% of the disability pension cases were attributable to ergonomic work environment. Ergonomic work environment, especially physically demanding work, working with hands lifted and repetitive work, are areas of intervention at the workplace that can facilitate and prolong labour market participation. The study provides estimates for the association between ergonomic exposures at work and administrative, cost-related measures of work disability in a large population-based longitudinal cohort study over 14 years. Approximately 21% for men and 34% for women of the disability pension cases were attributable to ergonomic work environment exposures.

Space Science Laboratory publications and presentations, 1 January - 31 December 1991

NASA Technical Reports Server (NTRS)

Moorehead, Tauna W.

1992-01-01

Listed here are significant publications and presentations of the Space Science Laboratory during the period January 1 to December 31, 1991. Entries are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included is an appendix listing preprints issued by the laboratory during this reporting period.

The ergonomics of women in surgery.

PubMed

Sutton, Erica; Irvin, Myra; Zeigler, Craig; Lee, Gyusung; Park, Adrian

2014-04-01

Among surgeons who regularly perform minimally invasive surgery, as many as 87 % report injuries or symptoms related to job performance. Operating room and instrument design have traditionally favored surgeons who are taller and who possess hands that are, in general, large and strong. We hypothesize that women may be experiencing more ergonomic difficulties than men for whom the operating room and surgical instruments, although uniformly perilous, more traditionally have accommodated. A 23-item web-based survey was offered via email to 2,000 laparoscopic surgeons and fellows currently practicing. The survey addressed four categories: demographics, physical symptoms, ergonomics, and environment/equipment. Key questions allowed us to identify which body part experienced which symptoms. There was a 15.7 % overall response rate. Among respondents, 17 % (54/314) were female. Women were significantly younger, shorter, had smaller glove size, and fewer years in practice than men surveyed (all p values < 0.0001). Of women reporting, 86.5 %—comparable to men—attribute physical discomfort to laparoscopic operating. Female surgeons are more likely to receive treatment for their hands, which includes the wrist, thumb, and fingers (odds ratio 3.5, p = 0.028). When men and women of the same glove size were compared, women with a larger glove size (7–8.5) reported more cases of treatment for their hands than men of the same glove size. (21 vs. 3 %, p = 0.016). Women who wore a size 5.5–6.5 surgical glove reported significantly more cases of discomfort in their shoulder area (neck, shoulder, upper back) than men who wore the same size surgical glove (77 vs. 27 %, p = 0.004). Women surgeons are experiencing more discomfort and treatment in their hands than male surgeons. Redesign of laparoscopic instrument handles and improvements to table height comprise the most promising solutions to these ergonomic challenges.

Implementation of an ergonomics program for the welding department inside a car assembly company.

PubMed

Francisco, Caceres; Edwin, Troya

2012-01-01

The premise for this project is to implement an ergonomics program for the welding department of a car assembly company, considering that this area represents the highest occupational risk in relation to musculoskeletal injuries. The project also allows the demonstration of the different implementation processes of an ergonomics program; it also permits the determination of individual risks faced by workers of the welding department, and finally gives a chance of improving common injuries using the sentinel system. The main challenge is to reduce musculoskeletal injuries and absenteeism among welders through actions implemented by the ergonomics program.

The explanatory power of Schema Theory: theoretical foundations and future applications in Ergonomics.

PubMed

Plant, Katherine L; Stanton, Neville A

2013-01-01

Schema Theory is intuitively appealing although it has not always received positive press; critics of the approach argue that the concept is too ambiguous and vague and there are inherent difficulties associated with measuring schemata. As such, the term schema can be met with scepticism and wariness. The purpose of this paper is to address the criticisms that have been levelled at Schema Theory by demonstrating how Schema Theory has been utilised in Ergonomics research, particularly in the key areas of situation awareness, naturalistic decision making and error. The future of Schema Theory is also discussed in light of its potential roles as a unifying theory in Ergonomics and in contributing to our understanding of distributed cognition. We conclude that Schema Theory has made a positive contribution to Ergonomics and with continued refinement of methods to infer and represent schemata it is likely that this trend will continue. This paper reviews the contribution that Schema Theory has made to Ergonomics research. The criticisms of the theory are addressed using examples from the areas of situation awareness, decision making and error.

The effects of ergonomics training on the knowledge, attitudes, and practices of teleworkers.

PubMed

Harrington, Susan S; Walker, Bonnie L

2004-01-01

The rapid growth of teleworking has raised several social and legal issues regarding an employer's responsibility for the safety of an employee's home office. In this paper, researchers discuss the need for safety training for teleworkers and the effectiveness of a home office ergonomics training program. Study participants (N = 50) were randomly assigned into a treatment or control group. The treatment group completed the ergonomics training and a pre- and posttest. The control group completed the pre- and posttests without training. The study demonstrated the need for teleworker ergonomics training. More than 85% of participants had not received teleworker training before, and 44% had experienced pain or discomfort while teleworking. Participants who completed the training significantly improved their scores on knowledge, attitude, and practices subtests. In a follow-up survey, participants indicated that they had made ergonomic changes to their offices based on the training. Several participants indicated that the pain or discomfort that they had been experiencing was eliminated or reduced as a result of the training.

Ergonomic Chairs

NASA Technical Reports Server (NTRS)

1997-01-01

Findings published in the NASA Anthropometric Source Book by Johnson Space Center helped BodyBilt, Inc. to fashion controlled comfort chairs that lessen the harmful effects of gravity on seated workers. Crew members living aboard NASA's Skylab noted that in space the human posture differs from the normal posture caused by the tug of one gravity. There has been an alarming increase in back pain and muscle fatigue in workers, along with a dramatic escalation in repetitive stress injuries. BodyBilt's ergonomically-correct line of office chairs are targeted for the average worker that sits for prolonged periods, be it in the classroom or boardroom. Their roster of national clients lists such organizations as IBM, Microsoft, Texas Instruments, Hewlett-Packard, Eastman-Kodak, Boeing, Motorola, and Walt Disney Studios.

Design and implementation of ergonomic performance measurement system at a steel plant in India.

PubMed

Ray, Pradip Kumar; Tewari, V K

2012-01-01

Management of Tata Steel, the largest steel making company of India in the private sector, felt the need to develop a framework to determine the levels of ergonomic performance at its different workplaces. The objectives of the study are manifold: to identify and characterize the ergonomic variables for a given worksystem with regard to work efficiency, operator safety, and working conditions, to design a comprehensive Ergonomic Performance Indicator (EPI) for quantitative determination of the ergonomic status and maturity of a given worksystem. The study team of IIT Kharagpur consists of three faculty members and the management of Tata Steel formed a team of eleven members for implementation of EPI model. In order to design and develop the EPI model with total participation and understanding of the concerned personnel of Tata Steel, a three-phase action plan for the project was prepared. The project consists of three phases: preparation and data collection, detailed structuring and validation of EPI model. Identification of ergonomic performance factors, development of interaction matrix, design of assessment tool, and testing and validation of assessment tool (EPI) in varied situations are the major steps in these phases. The case study discusses in detail the EPI model and its applications.

The potential of computer software that supports the diagnosis of workplace ergonomics in shaping health awareness

NASA Astrophysics Data System (ADS)

Lubkowska, Wioletta

2017-11-01

The growing prevalence of health problems among computer workstation workers has become one of the biggest threats to the overall health of our population. That is why many modern scientists are looking for ways and methods to prevent and reverse these negative trends. The purpose of this article is to present the potential for practical use of computer programs to design an ergonomic workplace and postural loads. These programs help configure the computer workstation correctly and adopt the correct body position during work, which reduces the risk of health problems. Creating visually attractive programs helps encourage and inspire those who work with a computer to introduce ergonomic solutions and reject the sedentary lifestyle.

Industrial workstation design: a systematic ergonomics approach.

PubMed

Das, B; Sengupta, A K

1996-06-01

For the design of an industrial workstation, ergonomics guidelines are presented in a systematic manner. The guidelines provide a conceptual basis for a good workstation design. In a real world design situation, the implementation of the recommendations or guidelines needs the matching of the population anthropometry with the various components of the workstation. Adequate posture, work height, normal and maximum working areas, lateral clearance and visual requirement are determined for the intended user population. The procedure for determining the workstation dimensions and layout has been explained. The importance of building a mock-up of the designed workstation and its evaluation with representative subjects is emphasized. A case problem (supermarket checkstand workstation) is discussed to illustrate the workstation design procedure.

Ergonomics in the psychiatric ward towards workers or patients?

PubMed

Silvana, Salerno; Laura, Forcella; Ursula, Di Fabio; Irene, Figà Talamanca; Paolo, Boscolo

2012-01-01

Patient's aggressive behavior is one of the major problem in the psychiatric ward. Here we present the preliminary results of a psychiatric ward case-study, of a public hospital in the Chieti province, in order to plan ergonomic improvement. We applied the Method of Organizational Congruencies in the psychiatric ward in order to study the relationship between organized hospital work and nurses wellbeing in a 24 hour shifts. We observed 58 main phases in the three work shifts. The technical actions are mainly those of any hospital wards (shift briefing, preparing and administering drugs, recording data on clinical charts, etc.). We found important differences mainly due to the nurses overcontrol activities on the patients behavior (preventing suicides or self destructive behavior), the occurrence of restraint procedure towards patients, the pollution due to patient's cigarette smoke. The fear of patient's self destructive behavior or other aggressive behaviour are the main cognitive and social aspects of this hospital ward. Nurses working in this psychiatric ward have to accept: locked doors, poor and polluted environment, restraint procedure with high risk of aggression and no availability of mental health care programs. A new interdisciplinary concept for ergonomics in psychiatry setting may represent a challenge for both nurses and patients and the community.

Work in corporate sustainability policies: the contribution of ergonomics.

PubMed

Bolis, I; Brunoro, C M; Sznelwar, L I

2014-01-01

By introducing policies for sustainability and social responsibility, companies declare their interest in caring for all stakeholders, including workers. To analyze how and which themes related to work practices and to workers are approached in the discourse of corporations are considered sustainable and socially responsible. Based on ergonomic principles, more elements are brought into this discussion, viewed from a strategic perspective for the development of corporations and society. Data collected from 20 corporations considered more sustainable according to an assessment made by the Corporate Knights organization. Multiple-case study, based on the analysis of secondary sources content (websites and reports). Analysis of websites and reports by their content, and their classification according to the aspects present in the thematic of work practices and of human rights elaborated by standard ISO 26000. Corporations show that the worker is one of the stakeholders to be considered in their sustainability and social responsibility policies. However, it's not possible using this method to obtain effective evidences related to actual programs performed by companies in order to demonstrate the real importance of workers in sustainable polices. The discipline of ergonomics could be active in improving the implementation of corporate social responsibility policies, especially by emphasizing the social dimension of these policies.

Quantifying tasks, ergonomic exposures and injury rates among school custodial workers.

PubMed

Village, J; Koehoorn, M; Hossain, S; Ostry, A

2009-06-01

A job exposure matrix of ergonomics risk factors was constructed for school custodial workers in one large school district in the province of British Columbia using 100 h of 1-min fixed-interval observations, participatory worker consensus on task durations and existing employment and school characteristic data. Significant differences in ergonomics risk factors were found by tasks and occupations. Cleaning and moving furniture, handling garbage, cleaning washrooms and cleaning floors were associated with the most physical risks and the exposure was often higher during the summer vs. the school year. Injury rates over a 4-year period showed the custodian injury rate was four times higher than the overall injury rate across all occupations in the school district. Injury rates were significantly higher in the school year compared with summer (12.2 vs. 7.0 per 100 full-time equivalents per year, p < 0.05). Custodial workers represent a considerable proportion of the labour force and have high injury rates, yet ergonomic studies are disproportionately few. Previous studies that quantified risk factors in custodial workers tended to focus on a few tasks or specific risk factors. This study, using participatory ergonomics and observational methods, systematically quantifies the broad range of musculoskeletal risk factors across multiple tasks performed by custodial workers in schools, adding considerably to the methodological literature.

Ergonomics of disposable handles for minimally invasive surgery.

PubMed

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

Office ergonomics programs. A case study of North American corporations.

PubMed

Moore, J S

1997-12-01

Subject matter experts from 13 North American corporations provided detailed descriptions of the historical development and the current components and operations of their office ergonomics programs. Results were summarized across corporations and presented for the following programmatic topics: backgrounds of key people, initial awareness and preliminary needs assessment, program development, program implementation, program monitoring and evaluation, program components, education and training, workstation and job analysis, early identification of cases, case management, and alternate office environments. The subject matter experts also provided comments about the strengths of their programs, their advice to others, and lessons they learned. These observations suggested the need for an office ergonomics program, and possibly other occupational health programs, to fit into a corporation's culture and capitalize on its infrastructure. Most corporations used multidisciplinary task forces or teams to develop their programs. Communication, which included training, awareness, advertising, and feedback, was also an important issue. Flexibility and simplicity were important attributes of these programs. It is hoped that this descriptive information will be helpful to some occupational health managers interested in or concerned about managerial perspectives and skills related to the development and implementation of programs within their own corporations.

A multimedia case based approach to the study of office ergonomics.

PubMed

August-Dalfen, Sharon; Snider, Laurie

2003-01-01

Multimedia technology has the capacity to provide students with an interactive approach to problem based learning and to bridge the gap between theoretical knowledge and clinical practice. The present paper describes the design and development of the program ErgoROM, a CD which presents a case study to assist occupational therapy students in their studies of office ergonomics. A pilot study showed that overall, 91% of respondents rated the ErgoROM as either "Excellent" or "Very Good". Additionally they reported that ErgoROM had a positive impact on active learning and critical thinking.

Ergonomics contribution to chemical risks prevention: An ergotoxicological investigation of the effectiveness of coverall against plant pest risk in viticulture.

PubMed

Garrigou, Alain; Baldi, Isabelle; Le Frious, Patricia; Anselm, Rémy; Vallier, Martine

2011-01-01

The purpose of this article is to present the contribution of a trans-disciplinary approach focused on ergonomics and chemical risk control. We shall more precisely discuss how such an approach carried out in the field of agricultural work has made it possible to highlight serious shortcomings in the effectiveness of the coveralls that are supposed to protect vineyard workers from pesticides. The study results, as well as the whistle-blow that followed have questioned the control and prevention measures used until then. The aforementioned trans-disciplinary approach gathers knowledge and methods from epidemiology, industrial hygiene, occupational health and safety and ergonomics. Ergonomics were central in the development of the approach as it connected task and activity analysis with contamination measurements. Lastly, the first results that were obtained have been confirmed and reused by the AFSSET (Agence Française de Sécurité Sanitaire Environnement et Travail, the French governmental agency in charge of environmental health and occupational health and safety issues) regarding the agricultural sector but also for all other situations in which workers use coveralls as protection against chemical risks. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Scanning through the pain: ergonomic considerations for performing echocardiography of animals.

PubMed

Macdonald, Kristin; Scott, Patrick

2013-03-01

Work-related musculoskeletal disorders (MSD) are a common problem among sonographers, with prevalence in human sonographers of 80-90%. However, this problem appears to be largely neglected in the veterinary literature. Awareness of MSDs, ergonomic redesign, workplace management, and physical self-care are components to reducing the risk of developing MSDs. Work-place redesign and alterations in work flow management are discussed, and a template for a more ergonomically favorable echocardiogram table is provided. Copyright © 2013 Elsevier B.V. All rights reserved.

AORN Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings.

PubMed

Hughes, Nancy L; Nelson, Audrey; Matz, Mary W; Lloyd, John

2011-06-01

Prolonged standing during surgical procedures poses a high risk of causing musculoskeletal disorders, including back, leg, and foot pain, which can be chronic or acute in nature. Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings provides recommendations for relieving the strain of prolonged standing, including the use of antifatigue mats, supportive footwear, and sit/stand stools, that are based on well-accepted ergonomic safety concepts, current research, and access to new and emerging technology. Published by Elsevier Inc.

Processes, barriers and facilitators to implementation of a participatory ergonomics program among eldercare workers.

PubMed

Rasmussen, Charlotte Diana Nørregaard; Lindberg, Naja Klærke; Ravn, Marie Højbjerg; Jørgensen, Marie Birk; Søgaard, Karen; Holtermann, Andreas

2017-01-01

This study aimed to investigate the processes of a participatory ergonomics program among 594 eldercare workers with emphasis on identified risk factors for low back pain and solutions, and reveal barriers and facilitators for implementation. Sixty-nine per cent of the identified risk factors were physical ergonomic, 24% were organisational and 7% were psychosocial risk factors. Most solutions were organisational (55%), followed by physical (43%) and psychosocial solutions (2%). Internal factors (e.g. team or management) constituted 47% of the barriers and 75% of the facilitators. External factors (e.g. time, financial resources, collaboration with resident or relatives) constituted 53% of the barriers and 25% of the facilitators. This study revealed the processes and implementation of a participatory ergonomics program among eldercare workers. The findings can be transferred to workers, workplaces, health and safety professionals, and researchers to improve future participatory ergonomics programs. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Reduction of work-related musculoskeletal risk factors following ergonomics education of sewing machine operators.

PubMed

Bulduk, Sıdıka; Bulduk, Emre Özgür; Süren, Tufan

2017-09-01

Work-related musculoskeletal disorders (WMSDs) are a major hazard for sewing machine operators. Ergonomics education is recommended for reducing musculoskeletal disorders at workstations. This study aimed to evaluate the effect of an ergonomics education in reducing the exposure to risk factors for WMSDs among sewing machine operators. In this study of 278 workers, their exposure to the risk of WMSDs was assessed using the quick exposure check scale prior to them attending an ergonomics education programme and then again 3 months after the programme. The scores for risk exposure before the education programme were moderate for back (static) and back (dynamic), high for shoulder/arm and very high for wrist/hand and neck. The results obtained 3 months later were low for back (static) and shoulder/arm, and moderate for back (dynamic), wrist/hand and neck. Based on our results, ergonomics education can reduce the exposure to risk factors for WMSDs in the workplace.

Ergonomic evaluation of 3D plane positioning using a mouse and a haptic device.

PubMed

Paul, Laurent; Cartiaux, Olivier; Docquier, Pierre-Louis; Banse, Xavier

2009-12-01

Preoperative planning and intraoperative assistance are needed to improve accuracy in tumour surgery. To be accepted, these processes must be efficient. An experiment was conducted to compare a mouse and a haptic device, with and without force feedback, to perform plan positioning in a 3D space. Ergonomics and performance factors were investigated during the experiment. Positioning strategies were observed. The task completion time, number of 3D orientations and failure rate were analysed. A questionnaire on ergonomics was filled out by each participant. The haptic device showed a significantly lower failure rate and was quicker and more ergonomic than the mouse. The force feedback was not beneficial to the accomplishment of the task. The haptic device is intuitive, ergonomic and more efficient than the mouse for positioning a 3D plane into a 3D space. Useful observations regarding positioning strategies will improve the integration of haptic devices into medical applications. Copyright (c) 2009 John Wiley & Sons, Ltd.

Applying systems ergonomics methods in sport: A systematic review.

PubMed

Hulme, Adam; Thompson, Jason; Plant, Katherine L; Read, Gemma J M; Mclean, Scott; Clacy, Amanda; Salmon, Paul M

2018-04-16

As sports systems become increasingly more complex, competitive, and technology-centric, there is a greater need for systems ergonomics methods to consider the performance, health, and safety of athletes in context with the wider settings in which they operate. Therefore, the purpose of this systematic review was to identify and critically evaluate studies which have applied a systems ergonomics research approach in the context of sports performance and injury management. Five databases (PubMed, Scopus, ScienceDirect, Web of Science, and SPORTDiscus) were searched for the dates 01 January 1990 to 01 August 2017, inclusive, for original peer-reviewed journal articles and conference papers. Reported analyses were underpinned by a recognised systems ergonomics method, and study aims were related to the optimisation of sports performance (e.g. communication, playing style, technique, tactics, or equipment), and/or the management of sports injury (i.e. identification, prevention, or treatment). A total of seven articles were identified. Two articles were focussed on understanding and optimising sports performance, whereas five examined sports injury management. The methods used were the Event Analysis of Systemic Teamwork, Cognitive Work Analysis (the Work Domain Analysis Abstraction Hierarchy), Rasmussen's Risk Management Framework, and the Systems Theoretic Accident Model and Processes method. The individual sport application was distance running, whereas the team sports contexts examined were cycling, football, Australian Football League, and rugby union. The included systems ergonomics applications were highly flexible, covering both amateur and elite sports contexts. The studies were rated as valuable, providing descriptions of injury controls and causation, the factors influencing injury management, the allocation of responsibilities for injury prevention, as well as the factors and their interactions underpinning sports performance. Implications and future

Redesigning the work system of rubber industries based on total ergonomics and ergo-micmac integration

NASA Astrophysics Data System (ADS)

Setiawan, H.

2018-01-01

The factory capacity achievement and the bottleneck reduction of production process at wet-blanket workstations are influenced by the balance of life quality rates and worker’s productivity, along with the worker’s ability and limitations, tasks, organization and work environment. The life quality of workers is indicated by: the reduction of workload, and fatigue. Meanwhile, work productivity is measured by increasing production results per work shift. The optimization of the quality of life and productivity of workers is achieved by redesigning the system and workstations based on ergonomics integrating Total Ergonomics with Ergo-MicMac (Micro Ergonomics and Macro Ergonomics), which includes redesigning wet-blanket folding worktable, regulating the system pattern of working in pairs, giving official break time, giving extra nutritious intakes such as sweet tea and snack Pempek, giving personal protective equipments, and redesigning physical working environments.This study was an experimental study, with treatment by subject design involving 30 workers sampled at a workstation condition before and after Ergonomics based redesign. The findings and conclusions of the study were derived from the reduction of the workload by 16.06%, fatigue by 18.84% and the increase of production results per work shift by 20.29%.

The modulation of upper extremity musculoskeletal disorders for a knowledge worker with chiropractic care and applied ergonomics: a case study

PubMed Central

Sherrod, Charles W.; Casey, George; Dubro, Robert E.; Johnson, Dale F.

2013-01-01

Objective This report describes the case management of musculoskeletal disorders for an employee in a college work environment using both chiropractic care and applied ergonomics. Clinical Findings A 54-year-old male office worker presented with decreased motor function in both wrists; intermittent moderate-to-severe headaches; and pain or discomfort in the neck, both shoulders, left hand and wrist, and lumbosacral region resulting from injuries sustained during recreational soccer and from excessive forces and awkward postures when interacting with his home and office computer workstations. Intervention and Results Ergonomic training, surveillance, retrofitted equipment with new furniture, and an emphasis on adopting healthy work-style behaviors were applied in combination with regular chiropractic care. Baseline ergonomic job task analysis identified risk factors and delineated appropriate control measures to improve the subject's interface with his office workstation. Serial reevaluations at 3-month, 1-year, and 2-year periods recorded changes to the participant's pain, discomfort, and work-style behaviors. At end of study and relative to baseline, pain scale improved from 4/10 to 2/10; general disability improved from 4 to 0; and hand grip strength (pounds) increased from 20 to 105 (left) and 45 to 100 (right). Healthy work habits and postures adopted in the 3-month to 1-year period regressed to baseline exposures for 3 of 6 risk priorities identified in the ergonomic job task analysis. Conclusion The patient responded positively to the intervention of chiropractic care and applied ergonomics. PMID:23997724

Ergonomic Enhancement for Older Readers with Low Vision

ERIC Educational Resources Information Center

Watson, Gale R.; Ramsey, Vincent; De l'Aune, William; Elk, Arona

2004-01-01

This study found that the provision of ergonomic workstations for 12 older persons with age-related macular degeneration who used low vision devices significantly increased the participants' reading speed and decreased their discomfort when reading.

Importance and effects of altered workplace ergonomics in modern radiology suites.

PubMed

Harisinghani, Mukesh G; Blake, Michael A; Saksena, Mansi; Hahn, Peter F; Gervais, Debra; Zalis, Michael; da Silva Dias Fernandes, Leonor; Mueller, Peter R

2004-01-01

The transition from a film-based to a filmless soft-copy picture archiving and communication system (PACS)-based environment has resulted in improved work flow as well as increased productivity, diagnostic accuracy, and job satisfaction. Adapting to this filmless environment in an efficient manner requires seamless integration of various components such as PACS workstations, the Internet and hospital intranet, speech recognition software, paperless electronic hospital medical records, e-mail, office software, and telecommunications. However, the importance of optimizing workplace ergonomics has received little attention. Factors such as the position of the work chair, workstation table, keyboard, mouse, and monitors, along with monitor refresh rates and ambient room lighting, have become secondary considerations. Paying close attention to the basics of workplace ergonomics can go a long way in increasing productivity and reducing fatigue, thus allowing full realization of the potential benefits of a PACS. Optimization of workplace ergonomics should be considered in the basic design of any modern radiology suite. Copyright RSNA, 2004

School children's use of computers and teachers' education in computer ergonomics.

PubMed

Dockrell, S; Fallon, E; Kelly, M; Masterson, B; Shields, N

2007-10-01

A national survey to investigate the education of teachers in computer-related ergonomics was carried out by postal questionnaire. The use of computers by primary school children (age 4-12 years) was also investigated. Data were collected from a random sample of 25% (n = 830) of primary schools in the Republic of Ireland. Questionnaires (n = 1863) were returned from 416 schools giving a response rate of 50.1%. Almost all schools (99.7%) had computers for children's use. The computers were most often (69.8%) used in the classroom. The majority (56.3%) of children worked in pairs. Most teachers (89.6%) had received computer training, but few (17.6%) had received ergonomics information during the training. Respondents were not satisfied with their current knowledge of ergonomics. Over 90% stated that they would like to receive further information by printed format or during a training course, rather than by computer (web or CD-ROM).

Teaching ergonomics to nursing facility managers using computer-based instruction.

PubMed

Harrington, Susan S; Walker, Bonnie L

2006-01-01

This study offers evidence that computer-based training is an effective tool for teaching nursing facility managers about ergonomics and increasing their awareness of potential problems. Study participants (N = 45) were randomly assigned into a treatment or control group. The treatment group completed the ergonomics training and a pre- and posttest. The control group completed the pre- and posttests without training. Treatment group participants improved significantly from 67% on the pretest to 91% on the posttest, a gain of 24%. Differences between mean scores for the control group were not significant for the total score or for any of the subtests.

Physical and psychosocial stress exposures in US dental schools: the need for expanded ergonomics training.

PubMed

Thornton, Linda J; Stuart-Buttle, Carol; Wyszynski, Theresa C; Wilson, Earlena R

2004-03-01

Dental students train in an environment similar to dentists in private practice. The literature reveals that physical and psychosocial stressors in dental schools are associated with adverse health outcomes. While dental educators have provided resources to address psychosocial factors and ergonomics training at the didactic level, the reinforcement of biomechanics at the clinic level has been overlooked. In this article the authors introduce a descriptive analysis of an ergonomics awareness program that expands the ergonomic training by including an assessment of the physical work performed by dental students in the clinic environment.

Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers.

PubMed

Vandergrift, Jonathan L; Gold, Judith E; Hanlon, Alexandra; Punnett, Laura

2012-01-01

To examine the association between ergonomic physical and psychosocial exposures and the risk of prevalent and incident low back pain (LBP) in a longitudinal cohort of automobile manufacturing workers. Ergonomic exposure intensity and LBP presence were determined through questionnaires at baseline (n=1181) and to workers in the same job 1 year later (n=505). Models were constructed using log-binomial regression with special attention to interactions between ergonomic exposures. Awkward back posture (prevalence ratio (PR) 1.12, 95% CI 1.07 to 1.17), hand force (PR 1.06, 95% CI 1.02 to 1.10), physical effort (PR 1.10, 95% CI 1.04 to 1.16) and whole body vibration (PR 1.04, 95% CI 1.01 to 1.08) were each associated cross-sectionally with LBP. Awkward back posture (RR 1.13, 95% CI 0.98 to 1.31) and hand force (RR 1.07, 95% CI 0.93 to 1.22) also predicted incident LBP, although estimates were statistically less precise. Neither job control, psychological demands, nor job strain was independently related to risk of incident LBP. Among participants reporting high physical ergonomic exposures and moderate to high job control, increasing job demands was associated with a reduced LBP risk (RR 0.72, 95% CI 0.52 to 1.00). Among participants reporting high physical exposures and low job control, psychological demands was associated with an increased LBP risk (RR 1.30, 95% CI 1.02 to 1.66). Psychosocial workplace interventions for LBP should prioritise jobs in which there are high physical ergonomic exposures. Future studies of LBP should examine the interactions between physical ergonomic risk factors.

Ergonomics evaluation of a government office building.

PubMed

Pentikis, John; Lopez, Mary S; Thomas, Robert E

2002-01-01

An ergonomics team from the US Army Center for Health Promotion and Preventive medicine evaluated 465 video display terminal (VDT) workstations in a Government office building over an 18-day period. Each workstation evaluation involved an assessment of the worker, the chair, the desk, the keyboard, the pointing device, the monitor, and the office environmental conditions. The team also collected worker pain and injury information. The problems seen during the evaluation were characteristic of most office environments where VDT workstation furniture was purchased before the advent of mouse-driven software. The majority of furniture evaluated was not designed to meet the demands of intensive mouse use for prolonged periods of time. Much of the workstation furniture was not adjustable, chairs lacked adequate back support, and workers assumed non-neutral postures. As a result, more than 35% of the workers evaluated complained of on-the-job pain. New office furniture that is adjustable, adequate desk space and storage space were among the solutions recommended by the ergonomics team.

Does drywall installers' innovative idea reduce the ergonomic exposures of ceiling installation: A field case study.

PubMed

Dasgupta, Priyadarshini Sengupta; Punnett, Laura; Moir, Susan; Kuhn, Sarah; Buchholz, Bryan

2016-07-01

The study was conducted to assess an intervention suggested by the workers to reduce the physical or ergonomic exposures of the drywall installation task. The drywall installers were asked to brainstorm on innovative ideas that could reduce their ergonomic exposures during the drywall installation work. The workers proposed the idea of using a 'deadman' (narrow panel piece) to hold the panels to the ceiling while installing them. The researcher collected quantitative exposure data (PATH, 3DSSPP) at the baseline and intervention phases and compared the phases to find out any change in the exposure while using the 'deadman'. Results showed that ergonomic exposures (such as overhead arm and awkward trunk postures and heavy load handling) were reduced at the intervention phase while using the 'deadman' with an electrically operated lift. The concept of the 'deadman', which was shown to help reduce musculoskeletal exposures during ceiling installation, can be used to fabricate a permanent ergonomic tool to support the ceiling drywall panel. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Identification of factors that affect the adoption of an ergonomic intervention among Emergency Medical Service workers.

PubMed

Weiler, Monica R; Lavender, Steven A; Crawford, J Mac; Reichelt, Paul A; Conrad, Karen M; Browne, Michael W

2012-01-01

This study explored factors contributing to intervention adoption decisions among Emergency Medical Service (EMS) workers. Emergency Medical Service workers (n = 190), from six different organisations, participated in a two-month longitudinal study following the introduction of a patient transfer-board (also known as slide-board) designed to ease lateral transfers of patients to and from ambulance cots. Surveys administered at baseline, after one month and after two months sampled factors potentially influencing the EMS providers' decision process. 'Ergonomics Advantage' and 'Patient Advantage' entered into a stepwise regression model predicting 'intention to use' at the end of month one (R (2 )= 0.78). After the second month, the stepwise regression indicated only two factors were predictive of intention to use: 'Ergonomics Advantage,' and 'Endorsed by Champions' (R (2 )= 0.58). Actual use was predicted by: 'Ergonomics Advantage' and 'Previous Tool Experience.' These results relate to key concepts identified in the diffusion of innovation literature and have the potential to further ergonomics intervention adoption efforts. Practitioner Summary. This study explored factors that potentially facilitate the adoption of voluntarily used ergonomics interventions. EMS workers were provided with foldable transfer-boards (slideboards) designed to reduce the physical demands when laterally transferring patients. Factors predictive of adoption measures included perceived ergonomics advantage, the endorsement by champions, and prior tool experience.

A study of trade-specific occupational ergonomics considerations in the U.S. construction industry.

PubMed

Choi, Sang D

2012-01-01

The aim of this survey study was to identify trade-specific ergonomic issues, and discuss practical solutions to reduce work-related musculoskeletal disorders (WMSDs) and injuries in the construction industry. Thirty-two construction firms in the Midwestern United States completed the final survey questionnaire. Twelve different construction skilled trades participated included: general contractor, road, heavy and highway, concrete, electrical, carpentry, landscaping, plumbing, roofing, steel erection, street lighting/traffic signal, and utility construction. Total workforce of the participating companies numbered 11,118 employees. More than 90% of the participants in the survey had a written safety program; however, the majority of the firms did not have a trade-specific ergonomic intervention. The survey revealed that construction constructors perceived safety (worker well-being) as a high priority in their company. This study suggested that construction skilled-trade jobs the construction worker to employ trade-specific hand tools and working body positions that may contribute to different types of WMSD risks, body parts injured, and injury sources. Possible practical construction trade-specific ergonomic solutions might be considered includinge: selection of ergonomic hand tools, reduction of weight of construction materials, and promotion of wellness exercises. This paper may imply that need for more trade-specific ergonomics program elements to help alleviate the work-related musculoskeletal problems in the construction field.

Ergonomics in thoracoscopic surgery: results of a survey among thoracic surgeons†

PubMed Central

Welcker, Katrin; Kesieme, Emeka B.; Internullo, Eveline; Kranenburg van Koppen, Laura J.C.

2012-01-01

OBJECTIVES The frequent and prolonged use of thoracoscopic equipment raises ergonomic risks which may cause physical distress. We aimed to determine the relationship between ergonomic problems encountered in thoracoscopic surgery and physical distress among thoracic surgeons. METHODS An online questionnaire which investigated personal factors, product factors, interaction factors and physical discomfort was sent to all members of the European Society of Thoracic Surgeons (ESTS). RESULTS Of the respondents, 2.4% indicated that a one arm's length should be the optimal distance between the surgeon and the monitor. Only 2.4% indicated that the monitor should be positioned below the eye level of the surgeon. Most of the respondents agreed, partially to fully, that they experienced neck discomfort because of inappropriate monitor height, bad monitor position and bad table height. Most respondents experienced numb fingers and shoulder discomfort due to instrument manipulation. Most of the respondents (77.1%) experienced muscle fatigue to some extent due to a static posture during thoracoscopic surgery. The majority of respondents (81.9, 76.3 and 83.2% respectively) indicated that they had varying degrees of discomfort mainly in the neck, shoulder and back. Some 94.4% of respondents were unaware of any guidelines concerning table height, monitor and instrument placement for endoscopic surgery. CONCLUSIONS Most thoracic surgeons in Europe are unaware of ergonomic guidelines and do not practise them, hence they suffer varying degrees of physical discomfort arising from ergonomic issues. PMID:22586071

Reducing musculoskeletal disorders among computer operators: comparison between ergonomics interventions at the workplace.

PubMed

Levanon, Yafa; Gefen, Amit; Lerman, Yehuda; Givon, Uri; Ratzon, Navah Z

2012-01-01

Typing is associated with musculoskeletal disorders (MSDs) caused by multiple risk factors. This control study aimed to evaluate the efficacy of a workplace intervention for reducing MSDs among computer workers. Sixty-six subjects with and without MSD were assigned consecutively to one of three groups: ergonomics intervention (work site and body posture adjustments, muscle activity training and exercises) accompanied with biofeedback training, the same ergonomics intervention without biofeedback and a control group. Evaluation of MSDs, body posture, psychosocial status, upper extremity (UE) kinematics and muscle surface electromyography were carried out before and after the intervention in the workplace and the motion lab. Our main hypothesis that significant differences in the reduction of MSDs will exist between subjects in the study groups and controls was confirmed (χ(2) = 13.3; p = 0.001). Significant changes were found in UE kinematics and posture as well. Both ergonomics interventions effectively reduced MSD and improved body posture. This study aimed to test the efficacy of an individual workplace intervention programme among computer workers by evaluating musculoskeletal disorders (MSDs), body posture, upper extremity kinematics, muscle activity and psychosocial factors were tested. The proposed ergonomics interventions effectively reduced MSDs and improved body posture.

Economic Ergonomic Approach to Design an Optimal Manpower and Mechanization in Rice Production

NASA Astrophysics Data System (ADS)

Muanah; Syuaib, M. F.; Liyantono

2018-05-01

Productivity of manpower could be improved by considering the economic and ergonomic aspect. The ergonomic aspect (human factor) is required to design an optimal manpower, while in the economic aspect, the well being of manpower could be evaluated from the amount of received income based on their work capability. This research was conducted on February 2016 to January 2017 in Gapoktan Silih Asih rice field Cigombong, Bogor. This study aims to analyze the income of manpower based on current conditions, increasement of working hours and mechanization addition. The results showed that manpower income based on the current condition and ergonomic consideration was Rp 1,174,030/person.month, by increasing the working hours with ergonomic consideration the obtained income was Rp 1,766,204/person.month. the revenues were based on the existing work system even though the increasement of working hours have not provided optimal income due to low productivity. Therefore the results of analysis with the addition of selective mechanization, showed self-ownership machinery was more profitable the obtained income have more than the Bogor minimum wage standard of Rp 2,969,325/person.month.

Human Factors and Ergonomics for the Dental Profession.

PubMed

Ross, Al

2016-09-01

This paper proposes that the science of Human Factors and Ergonomics (HFE) is suitable for wide application in dental education, training and practice to improve safety, quality and efficiency. Three areas of interest are highlighted. First it is proposed that individual and team Non-Technical Skills (NTS), such as communication, leadership and stress management can improve error rates and efficiency of procedures. Secondly, in a physically and technically challenging environment, staff can benefit from ergonomic principles which examine design in supporting safe work. Finally, examination of organizational human factors can help anticipate stressors and plan for flexible responses to multiple, variable demands, and fluctuating resources. Clinical relevance: HFE is an evidence-based approach to reducing error rates and procedural complications, and avoiding problems associated with stress and fatigue. Improved teamwork and organizational planning and efficiency can impact directly on patient outcomes.

Utilization of wheel dop based on ergonomic aspects

NASA Astrophysics Data System (ADS)

Widiasih, Wiwin; Murnawan, Hery; Setiawan, Danny

2017-06-01

Time is an important thing in life. People need a tool or equipment to measure time which is divided into two types, namely clock and watch. Everyone needs those kinds of tool. It becomes an opportunity for manufacturer to build a business. However, establishing a business by depending on the demand is not enough, it is necessary to take a consideration of making innovation. Innovation is a difficult thing to find out, but it is not impossible to do it. By creating an innovative product, it can be a strategy to win the competitive market. This study aimed to create an innovative product based on the ergonomic aspects, which was by utilizing wheel dop. This methodology consisted of pre-study, planning and product development, and product analysis. This product utilized wheel dop and was made based on the ergonomic aspects.

[A preliminary mapping methodology for occupational hazards and biomechanical risk evaluation: presentation of a simple, computerized tool kit for ergonomic hazards identification and risk assessment].

PubMed

Colombini, Daniela; Occhipinti, E; Di Leone, G

2011-01-01

During the last Congress of the International Ergonomics Association (IEA), Beijing, August 2009, an international group was founded with the task of developing a "toolkit for MSD prevention" under the IEA and in collaboration with the World Health Organization. The possible users of toolkits are: members of health and safety committees; health and safety representatives; line supervisors; foremen; workers; government representatives; health workers providing basic occupational health services; occupational health and safety specialists. According to the ISO standard 11228 series and the new Draft CD ISO 12259-2009: Application document guides for the potential user, our group developed a preliminary "mapping" methodology of occupational hazards in the craft industry, supported by software (Excel). The proposed methodology, using specific key enters and quick assessment criteria, allows a simple ergonomics hazards identification and risk estimation to be made. It is thus possible to decide for which occupational hazards a more exhaustive risk assessment will be necessary and which occupational consultant should be involved (occupational physician, safety engineer, industrial hygienist, etc.).

Visual ergonomics in the workplace.

PubMed

Anshel, Jeffrey R

2007-10-01

This article provides information about visual function and its role in workplace productivity. By understanding the connection among comfort, health, and productivity and knowing the many options for effective ergonomic workplace lighting, the occupational health nurse can be sensitive to potential visual stress that can affect all areas of performance. Computer vision syndrome-the eye and vision problems associated with near work experienced during or related to computer use-is defined and solutions to it are discussed.

Application of participatory ergonomics to the redesign of the family-centred rounds process.

PubMed

Xie, Anping; Carayon, Pascale; Cox, Elizabeth D; Cartmill, Randi; Li, Yaqiong; Wetterneck, Tosha B; Kelly, Michelle M

2015-01-01

Participatory ergonomics (PE) can promote the application of human factors and ergonomics (HFE) principles to healthcare system redesign. This study applied a PE approach to redesigning the family-centred rounds (FCR) process to improve family engagement. Various FCR stakeholders (e.g. patients and families, physicians, nurses, hospital management) were involved in different stages of the PE process. HFE principles were integrated in both the content (e.g. shared mental model, usability, workload consideration, systems approach) and process (e.g. top management commitment, stakeholder participation, communication and feedback, learning and training, project management) of FCR redesign. We describe activities of the PE process (e.g. formation and meetings of the redesign team, data collection activities, intervention development, intervention implementation) and present data on PE process evaluation. To demonstrate the value of PE-based FCR redesign, future research should document its impact on FCR process measures (e.g. family engagement, round efficiency) and patient outcome measures (e.g. patient satisfaction).

Application of participatory ergonomics to the redesign of the family-centered rounds process

PubMed Central

Xie, Anping; Carayon, Pascale; Cox, Elizabeth D.; Cartmill, Randi; Li, Yaqiong; Wetterneck, Tosha B.; Kelly, Michelle M.

2015-01-01

Participatory ergonomics (PE) can promote the application of human factors and ergonomics (HFE) principles to healthcare system redesign. This study applied a PE approach to redesigning the family-centered rounds (FCR) process to improve family engagement. Various FCR stakeholders (e.g., patients and families, physicians, nurses, hospital management) were involved in different stages of the PE process. HFE principles were integrated in both the content (e.g., shared mental model, usability, workload consideration, systems approach) and process (e.g., top management commitment, stakeholder participation, communication and feedback, learning and training, project management) of FCR redesign. We describe activities of the PE process (e.g., formation and meetings of the redesign team, data collection activities, intervention development, intervention implementation) and present data on PE process evaluation. To demonstrate the value of PE-based FCR redesign, future research should document its impact on FCR process measures (e.g., family engagement, round efficiency) and patient outcome measures (e.g., patient satisfaction). PMID:25777042

Web-based office ergonomics intervention on work-related complaints: a field study.

PubMed

Meinert, Marina; König, Mirjam; Jaschinski, Wolfgang

2013-01-01

The aim of this study was a proof of concept to examine the effects of a Web-based office ergonomics intervention on subjects' individual workplace adjustments. An intervention study was conducted with 24 office workers lasting 6 weeks with three consecutive phases (before, 1 and 5 weeks after the intervention). Employees used a purpose-made website for adjusting their computer workplaces without any personal support of ergonomics experts. Workplace measurements were taken directly on site and by analysing photos taken of the employee. Self-reported complaints were assessed by filling in a questionnaire. It was found that 96% of the employees changed their workplaces on their own and retained them mostly unchanged after the intervention. Furthermore, self-reported musculoskeletal complaints and headache symptoms decreased significantly after the intervention. These findings suggest an improvement of workplace conditions so that cost-effective ergonomic Web-based interventions appear promising in further research and application.

Numerical Ergonomics Analysis in Operation Environment of CNC Machine

NASA Astrophysics Data System (ADS)

Wong, S. F.; Yang, Z. X.

2010-05-01

The performance of operator will be affected by different operation environments [1]. Moreover, poor operation environment may cause health problems of the operator [2]. Physical and psychological considerations are two main factors that will affect the performance of operator under different conditions of operation environment. In this paper, applying scientific and systematic methods find out the pivot elements in the field of physical and psychological factors. There are five main factors including light, temperature, noise, air flow and space that are analyzed. A numerical ergonomics model has been built up regarding the analysis results which can support to advance the design of operation environment. Moreover, the output of numerical ergonomic model can provide the safe, comfortable, more productive conditions for the operator.

Ergonomic analysis jobs in recovered factories.

PubMed

Cuenca, Gabriela; Zotta, Gastón

2012-01-01

With the advent of the deep economic crisis in Argentina on 2001, the recovery of companies through to the creation of the Cooperatives Working Self-Management or Factories Recovered by its workers was constituted as one of the ways in which the salaried disobeyed the increasing unemployment. When the companies turn into recovered factories they tend to leave of side practices that have been seen like imposed by the previous organization and not understanding them as a primary condition for the execution of his tasks. Safety and ergonomics are two disciplines that are no longer considered relevant to the daily work. Therefore this investigation aims to revalue, undergo semantic to give back to a place in every organization analyzed. This research developed a self-diagnostic tool for working conditions, and the environment, present in the recovered factories.

Conceptual design of semi-automatic wheelbarrow to overcome ergonomics problems among palm oil plantation workers

NASA Astrophysics Data System (ADS)

Nawik, N. S. M.; Deros, B. M.; Rahman, M. N. A.; Sukadarin, E. H.; Nordin, N.; Tamrin, S. B. M.; Bakar, S. A.; Norzan, M. L.

2015-12-01

An ergonomics problem is one of the main issues faced by palm oil plantation workers especially during harvesting and collecting of fresh fruit bunches (FFB). Intensive manual handling and labor activities involved have been associated with high prevalence of musculoskeletal disorders (MSDs) among palm oil plantation workers. New and safe technology on machines and equipment in palm oil plantation are very important in order to help workers reduce risks and injuries while working. The aim of this research is to improve the design of a wheelbarrow, which is suitable for workers and a small size oil palm plantation. The wheelbarrow design was drawn using CATIA ergonomic features. The characteristic of ergonomics assessment is performed by comparing the existing design of wheelbarrow. Conceptual design was developed based on the problems that have been reported by workers. From the analysis of the problem, finally have resulting concept design the ergonomic quality of semi-automatic wheelbarrow with safe and suitable used for palm oil plantation workers.

Initiating an ergonomic analysis. A process for jobs with highly variable tasks.

PubMed

Conrad, K M; Lavender, S A; Reichelt, P A; Meyer, F T

2000-09-01

Occupational health nurses play a vital role in addressing ergonomic problems in the workplace. Describing and documenting exposure to ergonomic risk factors is a relatively straightforward process in jobs in which the work is repetitive. In other types of work, the analysis becomes much more challenging because tasks may be repeated infrequently, or at irregular time intervals, or under different environmental and temporal conditions, thereby making it difficult to observe a "representative" sample of the work performed. This article describes a process used to identify highly variable job tasks for ergonomic analyses. The identification of tasks for ergonomic analysis was a two step process involving interviews and a survey of firefighters and paramedics from a consortium of 14 suburban fire departments. The interviews were used to generate a list of frequently performed, physically strenuous job tasks and to capture clear descriptions of those tasks and associated roles. The goals of the survey were to confirm the interview findings across the entire target population and to quantify the frequency and degree of strenuousness of each task. In turn, the quantitative results from the survey were used to prioritize job tasks for simulation. Although this process was used to study firefighters and paramedics, the approach is likely to be suitable for many other types of occupations in which the tasks are highly variable in content and irregular in frequency.

Effectiveness of a participatory ergonomics intervention in improving communication and psychosocial exposures.

PubMed

Laing, A C; Cole, D C; Theberge, N; Wells, R P; Kerr, M S; Frazer, M B

2007-07-01

A participatory ergonomics programme was implemented in an automotive parts manufacturing factory in which an ergonomics change team was formed, composed of members from management, the organized labour union and the research team. It was hypothesized that the participatory nature of this change process would result in enhanced worker perceptions of workplace communication dynamics, decision latitude and influence, which in conjunction with anticipated mechanical exposure reductions would lead to reduced worker pain severity. Utilizing a sister plant in the corporation as a referent group, a quasi-experimental design was employed with a longitudinal, repeat questionnaire approach to document pre-post intervention changes. Nine participatory activities (psychosocial interventions) were implemented as part of the process. Communication dynamics regarding ergonomics were significantly enhanced at the intervention plant compared to the referent plant. However, there were no significantly different changes in worker perceptions of decision latitude or influence between the two plants, nor did pain severity change. Possible explanations for these results include limited intervention intensity, context and co-intervention differences between the two plants, high plant turnover reducing the statistical power of the study and lack of sensitivity and specificity in the psychosocial measures used. Further research should include the development of psychosocial tools more specific to participatory ergonomic interventions and the assessment of the extent of change in psychosocial factors that might be associated with improvements in pain.

The contributions of human factors and ergonomics to a sustainable minerals industry.

PubMed

Horberry, Tim; Burgess-Limerick, Robin; Fuller, Ruth

2013-01-01

This article describes examples of the application of human factors research and development work to a sustainable minerals industry. It begins by outlining human-related aspects of the minerals industry and the key human factors work previously undertaken in this domain. The focus then switches to sustainability in the minerals industry. Sustainability principles are introduced and illustrations provided of how human factors research and development work fits within such a framework. Three case studies of human factors in the minerals industry research are presented and the sustainability implications in each case study are highlighted. Finally, future trends related to human factors work in a sustainable minerals industry are addressed, in particular the opportunities and possible adverse consequences that increasing deployment of mining automation might bring. Minerals industries are a major global activity with significant sustainability implications. Aspects of sustainability in mining are examined using three case studies. These illustrate the contribution of human factors/ergonomics in reducing risks; developing emergency response management systems; and the value of participatory ergonomics in improving the design of mining equipment.

Learning without Pain: Ergonomics Prevents Injuries. Revised

ERIC Educational Resources Information Center

Healthy Schools Network, Inc., 2012

2012-01-01

"Ergonomics" is a body of knowledge about human abilities and limitations and how these abilities and limitations should be applied to the design of equipment, machinery, and other devices to ensure safe, comfortable and effective use. Most homes and schools today are equipped with computers for student use. Backpacks have become the…

Evaluating the Ergonomics of Flexible Ureteroscopy.

PubMed

Ludwig, Wesley W; Lee, Gyusung; Ziemba, Justin B; Ko, Joan S; Matlaga, Brian R

2017-10-01

To date, the ergonomics of flexible ureteroscopy (URS) have not been well described. We performed a study to assess the biomechanical stresses on urologists performing URS and to investigate the effect of ureteroscope type on these parameters. Electromyography (EMG) was used to quantify the activation level of muscle groups involved in URS. Surface EMG electrodes (Delsys, Boston, MA) were placed on the right and left thenar, flexor carpi ulnaris (FCU), extensor carpi ulnaris (ECU), biceps, triceps, and deltoid. Three endoscopes were studied: single-use digital (Boston Scientific LithoVue), reusable digital (Karl Storz Flex-X c ), and reusable fiber-optic (Karl Storz Flex-X 2 ). Each ureteroscope was used to perform a set sequence of navigation and procedural tasks in a training model. EMG data were processed and normalized to compare the maximum voluntary contractions between muscle groups. Cumulative muscular workload (CMW) and average muscular work per second (AWS) were used for comparative analysis. For navigational tasks, CMW and AWS were greatest for the ECU, followed in descending order by right and left thenar, FCU, biceps, deltoid, and triceps. For procedural tasks, CMW and AWS were greatest for the right thenar, followed in descending order by the left thenar, ECU, FCU, triceps, biceps, and deltoid. During navigational tasks, both LithoVue and Flex-X c had lower CMWs for every muscle group than Flex-X 2 (p < 0.05). LithoVue and Flex-X c had similar AWS and both were lower than Flex-X 2 for the right thenar, ECU, biceps, and deltoid activation (p < 0.05). During procedural tasks, both LithoVue and Flex-X c had lower CMWs and AWS for right and left thenar, ECU, and biceps than Flex-X 2 (p < 0.05). This study provides the first description of EMG-measured ergonomics of URS. Both the single-use and reusable digital ureteroscopes have similar profiles, and both have significantly better ergonomic metrics than the reusable fiber-optic ureteroscope.

Computer ergonomics: the medical practice guide to developing good computer habits.

PubMed

Hills, Laura

2011-01-01

Medical practice employees are likely to use computers for at least some of their work. Some sit several hours each day at computer workstations. Therefore, it is important that members of your medical practice team develop good computer work habits and that they know how to align equipment, furniture, and their bodies to prevent strain, stress, and computer-related injuries. This article delves into the field of computer ergonomics-the design of computer workstations and work habits to reduce user fatigue, discomfort, and injury. It describes practical strategies medical practice employees can use to improve their computer work habits. Specifically, this article describes the proper use of the computer workstation chair, the ideal placement of the computer monitor and keyboard, and the best lighting for computer work areas and tasks. Moreover, this article includes computer ergonomic guidelines especially for bifocal and progressive lens wearers and offers 10 tips for proper mousing. Ergonomically correct posture, movements, positioning, and equipment are all described in detail to enable the frequent computer user in your medical practice to remain healthy, pain-free, and productive.

Ergonomics in industrialized dairy operations.

PubMed

Douphrate, David I; Nonnenmann, Matthew W; Rosecrance, John C

2009-01-01

This paper presents a summary of a panel presentation by agriculture health and safety scientists on ergonomics of industrialized dairy parlor operations in the United States. Dairy industry trends in the United States were discussed in the panel presentation, which took place during the New Paths: Health and Safety in Western Agriculture conference, November 11-13, 2008. Dairy production is steadily moving to large-herd operations because of associated economies of scale and other economic and social conditions. Large-herd operations utilize a parlor milking system, as compared to a stanchion system used primarily in smaller operations. Each milking system presents different risks for worker injury. Low back, knee, and shoulder musculoskeletal symptoms were most frequently reported among workers in smaller dairy operations. Another study analyzing workers' compensation (WC) data from large-herd milking operations found nearly 50% of livestock-handling injury claims involved parlor milking activities. Nearly 27% of injuries were to the wrist, hand, and fingers, nearly 13% to the head or face, and 11% to the chest. Results indicated the vulnerability of these body parts to injury due to the worker-livestock interface during milking. More focused research should investigate milking practices and parlor designs as they relate to worker safety and health. Additional dairy-related injury research is vital given the trend towards large industrial milking operations.

"Alarm-corrected" ergonomic armrest use could improve learning curves of novices on robotic simulator.

PubMed

Yang, Kun; Perez, Manuela; Hossu, Gabriela; Hubert, Nicolas; Perrenot, Cyril; Hubert, Jacques

2017-01-01

In robotic surgery, the professional ergonomic habit of using an armrest reduces operator fatigue and increases the precision of motion. We designed and validated a pressure surveillance system (PSS) based on force sensors to investigate armrest use. The objective was to evaluate whether adding an alarm to the PSS system could shorten ergonomic training and improve performance. Twenty robot and simulator-naïve participants were recruited and randomized in two groups (A and B). The PSS was installed on a robotic simulator, the dV-Trainer, to detect contact with the armrest. The Group A members completed three tasks on the dV-Trainer without the alarm, making 15 attempts at each task. The Group B members practiced the first two tasks with the alarm and then completed the final tasks without the alarm. The simulator provided an overall score reflecting the trainees' performance. We used the new concept of an "armrest load" score to describe the ergonomic habit of using the armrest. Group B had a significantly higher performance score (p < 0.001) and armrest load score (p < 0.001) than Group A from the fifth attempt of the first task to the end of the experiment. Based on the conditioned reflex effect, the alarm associated with the PSS rectified ergonomic errors and accelerated professional ergonomic habit acquisition. The combination of the PSS and alarm is effective in significantly shortening the learning curve in the robotic training process.

Nutra-ergonomics: influence of nutrition on physical employment standards and the health of workers.

PubMed

Shearer, Jane; Graham, Terry E; Skinner, Tina L

2016-06-01

The importance of ergonomics across several scientific domains, including biomechanics, psychology, sociology, and physiology, have been extensively explored. However, the role of other factors that may influence the health and productivity of workers, such as nutrition, is generally overlooked. Nutra-ergonomics describes the interface between workers, their work environment, and performance in relation to their nutritional status. It considers nutrition to be an integral part of a safe and productive workplace that encompasses physical and mental health as well as the long-term wellbeing of workers. This review explores the knowledge, awareness, and common practices of nutrition, hydration, stimulants, and fortified product use employed prior to physical employment standards testing and within the workplace. The influence of these nutra-ergonomic strategies on physical employment standards, worker safety, and performance will be examined. Further, the roles, responsibilities, and implications for the applicant, worker, and the employer will be discussed within the context of nutra-ergonomics, with reference to the provision and sustainability of an environment conducive to optimize worker health and wellbeing. Beyond physical employment standards, workplace productivity, and performance, the influence of extended or chronic desynchronization (irregular or shift work) in the work schedule on metabolism and long-term health, including risk of developing chronic and complex diseases, is discussed. Finally, practical nutra-ergonomic strategies and recommendations for the applicant, worker, and employer alike will be provided to enhance the short- and long-term safety, performance, health, and wellbeing of workers.

A novel approach to supporting relationship-centered care through electronic health record ergonomic training in preclerkship medical education.

PubMed

Silverman, Howard; Ho, Yun-Xian; Kaib, Susan; Ellis, Wendy Danto; Moffitt, Marícela P; Chen, Qingxia; Nian, Hui; Gadd, Cynthia S

2014-09-01

How can physicians incorporate the electronic health record (EHR) into clinical practice in a relationship-enhancing fashion ("EHR ergonomics")? Three convenience samples of 40 second-year medical students with varying levels of EHR ergonomic training were compared in the 2012 spring semester. All participants first received basic EHR training and completed a presurvey. Two study groups were then instructed to use the EHR during the standardized patient (SP) encounter in each of four regularly scheduled Doctoring (clinical skills) course sessions. One group received additional ergonomic training in each session. Ergonomic assessment data were collected from students, faculty, and SPs in each session. A postsurvey was administered to all students, and data were compared across all three groups to assess the impact of EHR use and ergonomic training. There was a significant positive effect of EHR ergonomics skills training on students' relationship-centered EHR use (P<.005). Students who received training reported that they were able to use the EHR to engage with patients more effectively, better articulate the benefits of using the EHR, better address patient concerns, more appropriately position the EHR device, and more effectively integrate the EHR into patient encounters. Additionally, students' self-assessments were strongly corroborated by SP and faculty assessments. A minimum of three ergonomic training sessions were needed to see an overall improvement in EHR use. In addition to replication of these results, further effectiveness studies of this educational intervention need to be carried out in GME, practice, and other environments.

State of science: human factors and ergonomics in healthcare.

PubMed

Hignett, Sue; Carayon, Pascale; Buckle, Peter; Catchpole, Ken

2013-01-01

The past decade has seen an increase in the application of human factors and ergonomics (HFE) techniques to healthcare delivery in a broad range of contexts (domains, locations and environments). This paper provides a state of science commentary using four examples of HFE in healthcare to review and discuss analytical and implementation challenges and to identify future issues for HFE. The examples include two domain areas (occupational ergonomics and surgical safety) to illustrate a traditional application of HFE and the area that has probably received the most research attention. The other two examples show how systems and design have been addressed in healthcare with theoretical approaches for organisational and socio-technical systems and design for patient safety. Future opportunities are identified to develop and embed HFE systems thinking in healthcare including new theoretical models and long-term collaborative partnerships. HFE can contribute to systems and design initiatives for both patients and clinicians to improve everyday performance and safety, and help to reduce and control spiralling healthcare costs. There has been an increase in the application of HFE techniques to healthcare delivery in the past 10 years. This paper provides a state of science commentary using four illustrative examples (occupational ergonomics, design for patient safety, surgical safety and organisational and socio-technical systems) to review and discuss analytical and implementation challenges and identify future issues for HFE.

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers

PubMed Central

ZARE, Mohsen; MALINGE-OUDENOT, Agnes; HÖGLUND, Robert; BIAU, Sophie; ROQUELAURE, Yves

2015-01-01

The aims of this study were 1) to assess the ergonomic physical risk factors from practitioner’s viewpoint in a truck assembly plant with an in-house observational method and the NIOSH lifting equation, and 2) to compare the results of both methods and their differences. The in-house ergonomic observational method for truck assembly i.e. the SCANIA Ergonomics Standard (SES) and the NIOSH lifting equation were applied to evaluate physical risk factors and lifting of loads by operators. Both risk assessment approaches revealed various levels of risk, ranging from low to high. Two workstations were identified by the SES method as high risk. The NIOSH lifting index (LI) was greater than two for four lifting tasks. The results of the SES method disagreed with the NIOSH lifting equation for lifting tasks. Moreover, meaningful variations in ergonomic risk patterns were found for various truck models at each workstation. These results provide a better understanding of the physical ergonomic exposure from practitioner’s point of view in the automotive assembly plant. PMID:26423331

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers.

PubMed

Zare, Mohsen; Malinge-Oudenot, Agnes; Höglund, Robert; Biau, Sophie; Roquelaure, Yves

2016-01-01

The aims of this study were 1) to assess the ergonomic physical risk factors from practitioner's viewpoint in a truck assembly plant with an in-house observational method and the NIOSH lifting equation, and 2) to compare the results of both methods and their differences. The in-house ergonomic observational method for truck assembly i.e. the SCANIA Ergonomics Standard (SES) and the NIOSH lifting equation were applied to evaluate physical risk factors and lifting of loads by operators. Both risk assessment approaches revealed various levels of risk, ranging from low to high. Two workstations were identified by the SES method as high risk. The NIOSH lifting index (LI) was greater than two for four lifting tasks. The results of the SES method disagreed with the NIOSH lifting equation for lifting tasks. Moreover, meaningful variations in ergonomic risk patterns were found for various truck models at each workstation. These results provide a better understanding of the physical ergonomic exposure from practitioner's point of view in the automotive assembly plant.

Ergonomics: CTD management evaluation tool.

PubMed

Ostendorf, J S; Rogers, B; Bertsche, P K

2000-01-01

Cumulative trauma disorder (CTD) occurrences peaked in number in 1994 and although decreasing in 1995, still accounted for 62% of all illness cases reported. A CTD Management Evaluation Tool was developed to assist Occupational Safety and Health Compliance Officers (CSHOs) in program evaluation and documentation of the occupational health management component and the need for an ergonomics program. Occupational and environmental health nurses may use the tool not only to reduce and prevent CTD occurrences, but also as a benchmark for program evaluation.

Neck, back, and shoulder pains and ergonomic factors among dental students.

PubMed

Aghahi, Raha Habib; Darabi, Rezvan; Hashemipour, Maryam Alsadat

2018-01-01

Dynamic and static activities in dentistry cause musculoskeletal disorders, but dental students do not have sufficient awareness about the effects of ergonomic factors on their health. The aim of this study was to investigate ergonomic factors that cause pain muscle in dental students in Kerman Medical University, Iran. This cross-sectional analysis study was carried out on dental students of the 3 rd , 4 th , 5 th , and 6 th year, in clinical practice in the School of Dentistry, Kerman University of Medical Sciences. A convenient sample of 199 students who met the inclusion criteria was selected and those willing to participate signed an informed consent form. Data were collected by means of a structured questionnaire for ergonomic factors and the presence of pain. The variables evaluated were pain, affected zones, gender, postures, and work environment. The present research work reveals that over 69% of the dental students complained of pain in at least one part of their body. Most individuals suffered from hand and elbow (23%) and head (19%) pain. The clinical areas where more pain was found were endodontics and pedodontics. Furthermore, it was found that a high percentage of students usually worked with their legs slightly separated, with the sole of the feet resting on the stool when working. The presence of muscular pain was higher in males in this study. Furthermore, there was a statistically significant relationship with the final Rapid Entire Body Assessment score in different body parts and the participants' demographic data (sex, age, weight, height, sports, and smoking). The results of this study showed that the students' sitting positions and working environments need to be improved and it seems more training is necessary in this field.

Neck, back, and shoulder pains and ergonomic factors among dental students

PubMed Central

Aghahi, Raha Habib; Darabi, Rezvan; Hashemipour, Maryam Alsadat

2018-01-01

BACKGROUND: Dynamic and static activities in dentistry cause musculoskeletal disorders, but dental students do not have sufficient awareness about the effects of ergonomic factors on their health. The aim of this study was to investigate ergonomic factors that cause pain muscle in dental students in Kerman Medical University, Iran. METHODS: This cross-sectional analysis study was carried out on dental students of the 3rd, 4th, 5th, and 6th year, in clinical practice in the School of Dentistry, Kerman University of Medical Sciences. A convenient sample of 199 students who met the inclusion criteria was selected and those willing to participate signed an informed consent form. Data were collected by means of a structured questionnaire for ergonomic factors and the presence of pain. The variables evaluated were pain, affected zones, gender, postures, and work environment. RESULTS: The present research work reveals that over 69% of the dental students complained of pain in at least one part of their body. Most individuals suffered from hand and elbow (23%) and head (19%) pain. The clinical areas where more pain was found were endodontics and pedodontics. Furthermore, it was found that a high percentage of students usually worked with their legs slightly separated, with the sole of the feet resting on the stool when working. The presence of muscular pain was higher in males in this study. Furthermore, there was a statistically significant relationship with the final Rapid Entire Body Assessment score in different body parts and the participants’ demographic data (sex, age, weight, height, sports, and smoking). CONCLUSIONS: The results of this study showed that the students’ sitting positions and working environments need to be improved and it seems more training is necessary in this field. PMID:29619391

Productivity, or quality of work as the decisive factor in marketing ergonomics? Design considerations for a new ergonomic welding-table.

PubMed

van der Veen, F; Regensburg, R E

1990-04-01

Quality tools should be designed from the starting point of adjusting tasks and equipment to human possibilities and limitations. Companies should consider an investment in ergonomic equipment as a profitable addition to indispensable productive machinery. As an example to support this statement, the authors describe the health risks of welders and the possible solutions. As the result of investigations a list of requirements was drafted for a product that would have less of the disadvantages of the products mentioned. The designed product, the 'ergonomic welding-table', aims to be a quality tool for welders working at small and medium-sized tasks. The product consists of a cabin (2.35 m wide) with a built-in ventilator for very efficient welding-fume extraction (90%-95%). Welders can set their preferred working height at any time. Another advantage is the option of performing the welding task while standing or sitting. The results of user-evaluation among welders and purchasers indicates considerable satisfaction.

Work-related musculoskeletal disorders and ergonomic risk factors in special education teachers and teacher's aides.

PubMed

Cheng, Hsin-Yi Kathy; Wong, Man-Ting; Yu, Yu-Chung; Ju, Yan-Ying

2016-02-10

Work-related musculoskeletal disorders (WMSDs) have become increasingly common among health-related professionals. Special education personnel who serve students with disabilities often experience physical strains; however, WMSDs have been overlooked in this population. The objectives of this study were to investigate the work-related ergonomics-associated factors in this population and to evaluate their correlation with the WMSDs prevalence. A questionnaire with three domains, namely demographics, prevalence of work-related musculoskeletal disorders, and ergonomic factors, designed by our research team was delivered to educators who work in special education schools. Approximately 86 % of the 388 special education school teachers and teacher's aides in this study experienced musculoskeletal disorders. The lower back, shoulder, and wrist were the three most affected regions. A logistic regression analysis revealed that the participants' background factors, namely >5.5 years of experience (odds ratio [OR] = 4.090, 95 % CI: 1.350-12.390), students with multiple disorders (OR = 2.412, 95 % CI: 1.100-5.287), and other work-related ergonomic factors (assistance in diaper changing and others duties), were strongly associated with the prevalence of WMSD. Nap habit (OR = 0.442, 95 % CI: 0.230-0.851) and having teaching partners in the same class (OR = 0.486, 95 % CI: 0.250-0.945) resulted in low possibility of acquiring WMSDs. The use of supportive devices was associated with a low WMSD prevalence. The present study revealed an association between WMSDs and specific job features among teachers and teacher's aides in special education schools. Future efforts should emphasize examining safe student-handling ergonomics, formulating policies regarding student-teacher ratio, incorporating mandatory break times at the workplaces, and promoting personal health for preventing work-related injuries.

User-centered design and evaluation of a next generation fixed-split ergonomic keyboard.

PubMed

McLoone, Hugh E; Jacobson, Melissa; Hegg, Chau; Johnson, Peter W

2010-01-01

Research has shown that fixed-split, ergonomic keyboards lessen the pain and functional status in symptomatic individuals as well as reduce the likelihood of developing musculoskeletal disorders in asymptomatic typists over extended use. The goal of this study was to evaluate design features to determine whether the current fixed-split ergonomic keyboard design could be improved. Thirty-nine, adult-aged, fixed-split ergonomic keyboard users were recruited to participate in one of three studies. First utilizing non-functional models and later a functional prototype, three studies evaluated keyboard design features including: 1) keyboard lateral inclination, 2) wrist rest height, 3) keyboard slope, and 4) curved "gull-wing" key layouts. The findings indicated that keyboard lateral inclination could be increased from 8° to 14°; wrist rest height could be increased up to 10 mm from current setting; positive, flat, and negative slope settings were equally preferred and facilitated greater postural variation; and participants preferred a new gull-wing key layout. The design changes reduced forearm pronation and wrist extension while not adversely affecting typing performance. This research demonstrated how iterative-evaluative, user-centered research methods can be utilized to improve a product's design such as a fixed-split ergonomic keyboard.

Ergonomic Work Station Design to Improve Workload Quality and Productivity of the Craffsmen

NASA Astrophysics Data System (ADS)

Widana, IK; Wayan Sumetri, Ni; Ketut Sutapa, I.

2018-01-01

This study is a research on ergonomics field, especially for ergonomics work station. This research begins with direct observation on the work process of carving craft. In addition to the aspect of occupational health, the stages of the process are also subject matter in the effort to solve the research problem. In accordance with the master plan of research of Bali State Polytechnic, problem solving will be focused on human aspect and utilization of appropriate technology, so that will get the work process ENASEP (effective, convenient, safe, healthy, efficient and productive) Technical easy to work, economical, ergonomic, energy saving, environmentally friendly and in accordance with the trend of the era. The method to be used in this research is experimental with the same subject design. Involves 9 samples who perform activities on conditions before and after treatment. Data on environmental conditions were analyzed by Mann-Whitney test. Data on work productivity and workload were tested with two pair sample t-test at a significance level of 5%. The results showed that by utilizing ergonomic work stations, occupational health indicators such as workload showed better signs, indicated by decreased the workload. In addition to occupational health, productivity indicators also increased significantly.

Complexity, signal detection, and the application of ergonomics: reflections on a healthcare case study.

PubMed

Dekker, Sidney

2012-05-01

Complexity is a defining characteristic of healthcare, and ergonomic interventions in clinical practice need to take into account aspects vital for the success or failure of new technology. The introduction of new monitoring technology, for example, creates many ripple effects through clinical relationships and agents' cross-adaptations. This paper uses the signal detection paradigm to account for a case in which multiple clinical decision makers, across power hierarchies and gender gaps, manipulate each others' sensitivities to evidence and decision criteria. These are possible to analyze and predict with an applied ergonomics that is sensitive to the social complexities of the workplace, including power, gender, hierarchy and fuzzy system boundaries. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

PubMed

Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

2016-04-27

Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of

Student laboratory presentations as a learning tool in anatomy education.

PubMed

Chollet, Madeleine B; Teaford, Mark F; Garofalo, Evan M; DeLeon, Valerie B

2009-01-01

Previous studies have shown that anatomy students who complete oral laboratory presentations believe they understand the material better and retain it longer than they otherwise would if they only took examinations on the material; however, we have found no studies that empirically test such outcomes. The purpose of this study was to assess the effectiveness of oral presentations through comparisons with other methods of assessment, most notably, examination performance. Specifically, we tested whether students (n = 256) performed better on examination questions on topics covered by their oral presentations than on other topics. Each student completed two graded, 12-minute laboratory presentations on two different assigned topics during the course and took three examinations, each of which covered a third of the course material. Examination questions were characterized by type (memorization, pathway, analytical, spatial). A two-way repeated measures analysis of variance revealed that students performed better on topics covered by their presentations than on topics not covered by their presentations (P < 0.005), regardless of presentation grade (P > 0.05) and question type (P > 0.05). These results demonstrate empirically that oral presentations are an effective learning tool.

A survey of anthropometry and physical accommodation in ergonomics curricula.

PubMed

Garneau, Christopher J; Parkinson, Matthew B

2016-01-01

The size and shape of users are an important consideration for many products and environments. Designers and engineers in many disciplines must often accommodate these attributes to meet objectives such as fit and safety. When practitioners have academic training in addressing these issues, it is typically through courses in Human Factors/Ergonomics (HF/E). This paper investigates education related to physical accommodation and offers suggestions for improvement. A survey was conducted wherein 21 instructors at 18 universities in the United States provided syllabi for 29 courses, which were analysed to determine topics related to anthropometry and resources used for the courses. The results show that within the U.S., anthropometry is covered in the majority of courses discussing physical ergonomics, but important related concepts were often omitted (e.g., digital human modelling, multivariate accommodation and variability across global populations). Curricula could be improved by incorporating more accurate anthropometry, multivariate problems and interactive online tools. This paper describes a study investigating collegiate ergonomics courses within the U.S. in the area of physical accommodation. Course schedules and texts were studied for their treatment of several topics related to accommodating the spatial requirements (anthropometry) of users. Recommendations are made for improving course curricula.

The Effects of Training, Feedback, and Participant Involvement in Behavioral Safety Observations on Office Ergonomic Behavior

ERIC Educational Resources Information Center

Sasson, Joseph R.; Austin, John

2005-01-01

Eleven computer terminal operators participated in an experiment that assessed effects of several interventions aimed at increasing safe ergonomic performance. All participants received ergonomics training and performance feedback while six of them collected observations of safe behavior among the remaining five participants. Effects of…

Integrating ergonomics knowledge into business-driven design projects: The shaping of resource constraints in engineering consultancy.

PubMed

Hall-Andersen, Lene Bjerg; Neumann, Patrick; Broberg, Ole

2016-10-17

The integration of ergonomics knowledge into engineering projects leads to both healthier and more efficient workplaces. There is a lack of knowledge about integrating ergonomic knowledge into the design practice in engineering consultancies. This study explores how organizational resources can pose constraints for the integration of ergonomics knowledge into engineering design projects in a business-driven setting, and how ergonomists cope with these resource constraints. An exploratory case study in an engineering consultancy was conducted. A total of 27 participants were interviewed. Data were collected applying semi-structured interviews, observations, and documentary studies. Interviews were transcribed, coded, and categorized into themes. From the analysis five overall themes emerged as major constituents of resource constraints: 1) maximizing project revenue, 2) payment for ergonomics services, 3) value of ergonomic services, 4) role of the client, and 5) coping strategies to overcome resource constraints. We hypothesize that resource constraints were shaped due to sub-optimization of costs in design projects. The economical contribution of ergonomics measures was not evaluated in the entire life cycle of a designed workplace. Coping strategies included teaming up with engineering designers in the sales process or creating an alliance with ergonomists in the client organization.

Evaluation of three ergonomic measures on productivity, physical work demands, and workload in gypsum bricklayers.

PubMed

van der Molen, Henk F; Kuijer, P Paul F M; Formanoy, Margriet; Bron, Lennart; Hoozemans, Marco J M; Visser, Bart; Frings-Dresen, Monique H W

2010-06-01

This study evaluated the effects of a combination of three ergonomic measures designed to reduce the risk of low back complaints among gypsum bricklayers. The measures focused on optimizing working height and reducing carrying distances. A within-subjects (N = 10) controlled field study was used to compare the effects of working with the ergonomic measures with those of working with conventional working methods at the worksite during the course of a full working day. Productivity, work demands, and workload were assessed. No effects were found on productivity, total work time, duration of tasks, duration of carrying, or energetic or biomechanical workload. However, the duration and frequency of working between knee and hip height during a working day increased by 25% and 15%, respectively, due to the ergonomic measures. During the finishing task, the duration and frequency of working below knee level decreased significantly by 4 min and 71 times, respectively. The limited impact of the ergonomic measures argues for additional measures to reduce the risk of low back complaints. 2010 Wiley-Liss, Inc.

Anthropometric change: implications for office ergonomics.

PubMed

Gordon, Claire C; Bradtmiller, Bruce

2012-01-01

Well-designed office workspaces require good anthropometric data in order to accommodate variability in the worker population. The recent obesity epidemic carries with it a number of anthropometric changes that have significant impact on design. We examine anthropometric change among US civilians over the last 50 years, and then examine that change in a subset of the US population--the US military--as military data sets often have more ergonomic dimensions than civilian ones. The civilian mean stature increased throughout the period 1962 to 2006 for both males and females. However, the rate of increase in mean weight was considerably faster. As a result, the male obesity rate changed from 10.7% in 1962 to 31.3% in 2006. The female change for the same period was 15.8% to 33.2%. In the Army, the proportion of obesity increased from 3.6% to 20.9%, in males. In the absence of national US ergonomic data, we demonstrate one approach to tracking civilian change in these dimensions, applying military height/weight regression equations to the civilian population estimates. This approach is useful for population monitoring but is not suitable for establishing new design limits, as regression estimates likely underestimate the change at the ends of the distribution.

Comparative assessment of physical and cognitive ergonomics associated with robotic and traditional laparoscopic surgeries.

PubMed

Lee, Gyusung I; Lee, Mija R; Clanton, Tameka; Clanton, Tamera; Sutton, Erica; Park, Adrian E; Marohn, Michael R

2014-02-01

We conducted this study to investigate how physical and cognitive ergonomic workloads would differ between robotic and laparoscopic surgeries and whether any ergonomic differences would be related to surgeons' robotic surgery skill level. Our hypothesis is that the unique features in robotic surgery will demonstrate skill-related results both in substantially less physical and cognitive workload and uncompromised task performance. Thirteen MIS surgeons were recruited for this institutional review board-approved study and divided into three groups based on their robotic surgery experiences: laparoscopy experts with no robotic experience, novices with no or little robotic experience, and robotic experts. Each participant performed six surgical training tasks using traditional laparoscopy and robotic surgery. Physical workload was assessed by using surface electromyography from eight muscles (biceps, triceps, deltoid, trapezius, flexor carpi ulnaris, extensor digitorum, thenar compartment, and erector spinae). Mental workload assessment was conducted using the NASA-TLX. The cumulative muscular workload (CMW) from the biceps and the flexor carpi ulnaris with robotic surgery was significantly lower than with laparoscopy (p < 0.05). Interestingly, the CMW from the trapezius was significantly higher with robotic surgery than with laparoscopy (p < 0.05), but this difference was only observed in laparoscopic experts (LEs) and robotic surgery novices. NASA-TLX analysis showed that both robotic surgery novices and experts expressed lower global workloads with robotic surgery than with laparoscopy, whereas LEs showed higher global workload with robotic surgery (p > 0.05). Robotic surgery experts and novices had significantly higher performance scores with robotic surgery than with laparoscopy (p < 0.05). This study demonstrated that the physical and cognitive ergonomics with robotic surgery were significantly less challenging. Additionally, several ergonomic components

An ergonomic study on the biomechanical consequences in children, generated by the use of computers at school.

PubMed

Paraizo, Claudia; de Moraes, Anamaria

2012-01-01

This research deals with the influence of the computer use in schools related to the children posture, in an ergonomic point of view. The research tries to identify probable causes for the children early postural constraints, relating it to the sedentary behavior and the lack of an ergonomic project in schools. The survey involved 186 children, between 8 and 12 years old, students of a private school in Rio de Janeiro-Brasil. An historical and theoretical school furniture research was conducted as well as a survey with the students and teachers, computer postural evaluation, ergonomic evaluation (RULA method), and observations in the computer classroom. The research dealt with the student's perception with respect to the furniture utilized by him in the classroom during the use of the computer, his body complaint, the time he spent working on the school computer and the possibility of the existence of sedentariness. Also deals with the teachers' perception and knowledge regarding ergonomics with reference to schoolroom furniture and its Regulatory Norms (RN). The purpose of the research work is to highlight the importance of this knowledge, having in view the possibility of the teachers' collaboration in the ergonomic adaptation of the classroom environment and in their conscientious opinion during the purchasing of this furniture. A questionnaire was utilized and its results showed some discontent on the part of the teachers with relation to the schoolroom furniture as well as the teachers' scant knowledge of Ergonomics.We conclude with a survey that despite the children had constraints in postural assessments and school furniture needs a major ergonomic action, the time that children use the computer at school is small compared with the time of use at home and therefore insufficient to be the main cause of quantified commitments, thus the study of computer use at home as a development and continuity of this research.

Work organization and ergonomics.

PubMed

Carayon, P; Smith, M J

2000-12-01

This paper examines the impact of sociotechnical and business trends on work organization and ergonomics. This analysis is performed with the use of Balance Theory (Smith and Carayon-Sainfort, Int. J. Ind. Ergon. 1989, 4, 67-79). The impact on work organization and the work system of the following sociotechnical and business trends is discussed: re-structuring and re-organizing of companies, new forms of work organization, workforce diversity, and information and communication technology. An expansion of Balance Theory, from the design of work systems to the design of organizations, is discussed. Finally, the issue of change is examined. Several elements and methods are discussed for the design of change processes.

[Inter-rater agreement on self-reported exposure to ergonomic risk factors for the upper extremities among mechanic assemblers in an automotive industry].

PubMed

d'Errico, Angelo; Fontana, Dario; Merogno, Angela

2016-01-01

to assess reproducibility of self-reported exposure to ergonomic hazards for the upper limbs, measured through a questionnaire based on a diffused checklist for the assessment of ergonomic risk (OCRA) in a sample of mechanical assemblers of an automotive industry. cross-sectional study; reproducibility was assessed as interrater agreement of a composite index of ergonomic risk, estimated through the intraclass correlation coefficient (ICC). 58 mechanical assemblers, working in 29 twin areas, characterised by same work stations and tasks. composite index of ergonomic risk for the upper limbs. reproducibility of the ergonomic index was high in the overall sample (ICC: 0.81) and it was higher for the twin areas employing same-gender workers (ICC: 0.96), compared to those with workers of the opposite gender (ICC: 0.66). these results indicate that a questionnaire measuring with a great detail the exposure to the main ergonomic risk factors for the upper limbs, as the one based on the OCRA checklist used for this study, would allow to obtain a highly reproducible ergonomic index. If its validity against the corresponding observational checklist will be found elevated by future studies, this questionnaire may represent a useful tool for a preliminary assessment of workers' exposure to ergonomic hazards for the upper limbs.

Qualitative ergonomics/human factors research in health care: Current state and future directions.

PubMed

Valdez, Rupa Sheth; McGuire, Kerry Margaret; Rivera, A Joy

2017-07-01

The objective of this systematic review was to understand the current state of Ergonomics/Human Factors (E/HF) qualitative research in health care and to draw implications for future efforts. This systematic review identified 98 qualitative research papers published between January 2005 and August 2015 in the seven journals endorsed by the International Ergonomics Association with an impact factor over 1.0. The majority of the studies were conducted in hospitals and outpatient clinics, were focused on the work of formal health care professionals, and were classified as cognitive or organizational ergonomics. Interviews, focus groups, and observations were the most prevalent forms of data collection. Triangulation and data archiving were the dominant approaches to ensuring rigor. Few studies employed a formal approach to qualitative inquiry. Significant opportunities remain to enhance the use of qualitative research to advance systems thinking within health care. Copyright © 2017 Elsevier Ltd. All rights reserved.

Transforming a hospital safety and ergonomics program: a four year journey of change.

PubMed

Missar, Vicki J; Metcalfe, Don; Gilmore, Gail

2012-01-01

The conception of "Patient Safety" being the number one priority at Hospitals can reduce the emphasis on overall employee safety and health. This review examines a hospital's need to improve 24/7 active (i.e., not reactive) coverage, regulatory compliance, as well as the frequency and severity of employee injury losses. It also discusses a journey to integrate and improve safety and ergonomics to achieve these goals. Three approaches used by the ergonomist to create the transformation included: 1) adoption of the safety and ergonomic hazard identification; 2) safe patient handling; and 3) implementation of a 5S program. The results of the four (4) year effort at the not for profit, 637 bed, full service, acute-care hospital has shown a steady decline in frequency, reduced waste, and improved housekeeping. Ergonomists can have a key role in transforming Hospital Safety and Ergonomic Programs.

Development of a method to assess compliance with ergonomic posture in dental students

PubMed Central

Garcia, Patrícia Petromilli Nordi Sasso; Wajngarten, Danielle; Campos, Juliana Alvares Duarte Bonini

2018-01-01

CONTEXT: The ergonomic posture protocol is extremely important for the maintenance of occupational health in dentistry. The lack of compliance with this protocol results in a high risk of developing musculoskeletal disorders. AIMS: This study developed a direct observation method for the evaluation of dental student compliance with ergonomic posture protocol. SUBJECTS AND METHODS: The method is named compliance assessment of dental ergonomic posture requirements (CADEP). During the development of the method, 14 items were elaborated considering the theory of dental ergonomics. Each item should be classified as appropriate, partially appropriate, or inappropriate. After evaluation, all item values should be added, and the final score expressed as the percent of compliance with correct postures, with a score range of 0%–100%. STATISTICAL ANALYSIS USED: The reliability of CADEP was assessed through intra- and interobserver reproducibility. For the CADEP application, 73 senior year students from the undergraduate course in dentistry were evaluated. The intra- and interexaminer concordance was estimated using the intraclass correlation coefficient (ρ). A descriptive statistical analysis was performed. RESULTS: The reproducibility of evaluator 1 (ρ =0.90; confidence interval [CI] 95%: 0.83–0.94), evaluator 2 (ρ = 0.83; CI 95%: 0.70–0.90), the interexaminer in the first evaluation (ρ = 0.81; CI 95%:0.67–0.89), and in the second one (ρ = 0.76; CI 95%: 0.59–0.87) was classified as good. In the analysis of the compliance, it was verified that moderate compliance was the most prevalent among the evaluated students (65.6%, CI 95%: 60.3%–70.7%). CONCLUSIONS: CADEP was valid and reliable for the assessment of dentistry students’ compliance regarding ergonomic posture requirements. PMID:29693025

Towards a sustainable world through human factors and ergonomics: it is all about values.

PubMed

Lange-Morales, Karen; Thatcher, Andrew; García-Acosta, Gabriel

2014-01-01

In this paper, we analyse two approaches that attempt to address how a human factors and ergonomics (HFE) perspective can contribute to the sustainability of the human race. We outline the principles, purposes and fields of application of ergoecology and green ergonomics, and thereafter deal with their context of emergence, and the overlaps in purpose, and principles. Shared values are deduced and related to socio-technical principles for systems' design. Social responsibility and environmental/ecospheric responsibility are the leading threads of ergoecology and green ergonomics, giving rise to the values of: respect for human rights, respect for the Earth, respect for ethical decision-making, appreciation of complexity, respect for transparency and openness, and respect for diversity. We discuss the consequences of considering these values in HFE theory and practice.

Advancing Ergonomic Expertise in Occupational Therapists: Using an Online Course to Facilitate Knowledge Acquisition and Application of Ergonomics in Daily Practice

ERIC Educational Resources Information Center

Finch, Denise E.

2012-01-01

Health promotion, prevention of disease and disability, and enhancing participation in meaningful life activities are areas that occupational therapists (OT) can contribute to at the individual, organizational and population levels (AOTA, 2008; Scaffa, Van Slyke & Brownson, 2008). OTs that are skilled in ergonomic assessment and evidence-based…

Effect of office ergonomics intervention on reducing musculoskeletal symptoms.

PubMed

Amick, Benjamin C; Robertson, Michelle M; DeRango, Kelly; Bazzani, Lianna; Moore, Anne; Rooney, Ted; Harrist, Ron

2003-12-15

Office workers invited and agreeing to participate were assigned to one of three study groups: a group receiving a highly adjustable chair with office ergonomics training, a training-only group, and a control group receiving the training at the end of the study. To examine the effect of office ergonomics intervention in reducing musculoskeletal symptom growth over the workday and, secondarily, pain levels throughout the day. Data collection occurred 2 months and 1 month before the intervention and 2, 6, and 12 months postintervention. During each round, a short daily symptom survey was completed at the beginning, middle, and end of the workday for 5 days during a workweek to measure total bodily pain growth over the workday. Multilevel statistical models were used to test hypotheses. The chair-with-training intervention lowered symptom growth over the workday (P = 0.012) after 12 months of follow-up. No evidence suggested that training alone lowered symptom growth over the workday (P = 0.461); however, average pain levels in both intervention groups were reduced over the workday. Workers who received a highly adjustable chair and office ergonomics training had reduced symptom growth over the workday. The lack of a training-only group effect supports implementing training in conjunction with highly adjustable office furniture and equipment to reduce symptom growth. The ability to reduce symptom growth has implications for understanding how to prevent musculoskeletal injuries in knowledge workers.

Analysis of comfort and ergonomics for clinical work environments.

PubMed

Shafti, Ali; Lazpita, Beatriz Urbistondo; Elhage, Oussama; Wurdemann, Helge A; Althoefer, Kaspar

2016-08-01

Work related musculoskeletal disorders (WMSD) are a serious risk to workers' health in any work environment, and especially in clinical work places. These disorders are typically the result of prolonged exposure to non-ergonomic postures and the resulting discomfort in the workplace. Thus a continuous assessment of comfort and ergonomics is necessary. There are different techniques available to make such assessments, such as self-reports on perceived discomfort and observational scoring models based on the posture's relevant joint angles. These methods are popular in medical and industrial environments alike. However, there are uncertainties with regards to objectivity of these methods and whether they provide a full picture. This paper reports on a study about these methods and how they correlate with the activity of muscles involved in the task at hand. A wearable 4-channel electromyography (EMG) and joint angle estimation device with wireless transmission was made specifically for this study to allow continuous, long-term and real-time measurements and recording of activities. N=10 participants took part in an experiment involving a buzz-wire test at 3 different levels, with their muscle activity (EMG), joint angle scores (Rapid Upper Limb Assessment - RULA), self-reports of perceived discomfort (Borg scale) and performance score on the buzz-wire being recorded and compared. Results show that the Borg scale is not responsive to smaller changes in discomfort whereas RULA and EMG can be used to detect more detailed changes in discomfort, effort and ergonomics.

Task parameters affecting ergonomic demands and productivity of HVAC duct installation.

PubMed

Mitropoulos, Panagiotis; Hussain, Sanaa; Guarascio-Howard, Linda; Memarian, Babak

2014-01-01

Mechanical installation workers experience work-related musculoskeletal disorders (WMSDs) at high rates. (1) Quantify the ergonomic demands during HVAC installation, (2) identify the tasks and task parameters that generated extreme ergonomic demands, and (3) propose improvements to reduce the WMSDs among mechanical workers. The study focused on installation of rectangular ductwork components using ladders, and analyzed five operations by two mechanical contractors. Using continuous time observational assessment, the videotaped operations were analyzed along two dimensions: (1) the production tasks and durations, and (2) the ergonomic demands for four body regions (neck, arms/shoulders, back, and knees). The analysis identified tasks with low portion of productive time and high portion of extreme postures, and task parameters that generated extreme postures. Duct alignment was the task with the highest portion of extreme postures. The position of the ladder (angle and distance from the duct) was a task parameter that strongly influenced the extreme postures for back, neck and shoulders. Other contributing factors included the difficulty to reach the hand tools when working on the ladder, the congestion of components in the ceiling, and the space between the duct and the ceiling. The identified tasks and factors provide directions for improvement.

Supporting the design of office layout meeting ergonomics requirements.

PubMed

Margaritis, Spyros; Marmaras, Nicolas

2007-11-01

This paper proposes a method and an information technology tool aiming to support the ergonomics layout design of individual workstations in a given space (building). The proposed method shares common ideas with previous generic methods for office layout. However, it goes a step forward and focuses on the cognitive tasks which have to be carried out by the designer or the design team trying to alleviate them. This is achieved in two ways: (i) by decomposing the layout design problem to six main stages, during which only a limited number of variables and requirements are considered and (ii) by converting the ergonomics requirements to functional design guidelines. The information technology tool (ErgoOffice 0.1) automates certain phases of the layout design process, and supports the design team either by its editing and graphical facilities or by providing adequate memory support.

AORN ergonomic tool 7: pushing, pulling, and moving equipment on wheels.

PubMed

Waters, Thomas; Lloyd, John D; Hernandez, Edward; Nelson, Audrey

2011-09-01

Pushing and pulling equipment in and around the OR can place high shear force demands on perioperative team members' shoulder and back muscles and joints. These high forces may lead to work-related musculoskeletal disorders. AORN Ergonomic Tool 7: Pushing, Pulling, and Moving Equipment on Wheels can help perioperative team members assess the risk of pushing and pulling tasks in the perioperative setting. The tool provides evidence-based suggestions about when assistive devices should be used for these tasks and is based on current ergonomic safety concepts, scientific evidence, and knowledge of effective technology and procedures, including equipment and devices for safe patient handling. Published by Elsevier Inc.

The use of graphs in the ergonomic evaluation of tall pilots' sitting posture.

PubMed

de Ree, J J

1989-10-01

A survey has shown that the average height of KLM pilots has increased by 18 mm (0.7 in) per decade in the last 20 years. Around 6% are taller than 1905 mm (75.0 in), the upper limit of pilot height for flight deck design. With the use of graphs of the flight deck, we established that the main problem of tall pilots is insufficient legroom. Of all KLM/NLM aircraft types, the Boeing 747-200/300 and the Douglas DC-9 are most uncomfortable for pilots taller than 1960 mm (77.2 in). In the Airbus A310, pilots of 2000 mm (78.7 in) have insufficient legroom. The other aircraft types do not present difficulties for pilots up to 2030 mm (79.9 in). Ergonomic adaptations on the flight decks of the Boeing 747-200/300 and the Airbus A310 are necessary to alleviate the problems of tall pilots. Future aircraft types should be designed to accommodate tall pilots. If ergonomic adaptation of the flight deck is impossible, anthropometric limits for pilot selection have to be employed.

Ergonomics, safety, and resilience in the helicopter offshore transportation system of Campos Basin.

PubMed

Gomes, José Orlando; Huber, Gilbert J; Borges, Marcos R S; de Carvalho, Paulo Victor R

2015-01-01

Air transportation of personnel to offshore oil platforms is one of the major hazards of this kind of endeavor. Pilot performance is a key factor in the safety of the transportation system. This study seeks to identify the ergonomic factors present in pilots' activities that may in some way compromise or enhance their performance, the constraints and affordances which they are subject to; and where possible to link these to their associated risk factors. Methodology adopted in this project studies work in its context. It is a merging of Activity Analysis (Guerin et al. 2001) of European tradition with Cognitive Task Analysis (CTA - www.ctaresource.com) articulated with the recent approaches to cognitive systems engineering developed by Professors David Woods and Erik Hollnagel. Fifty-five hours of field interviews provided the input for analysis. Sixteen ergonomic constraints were identified, some cognitive, some physical, all considered relevant by the research subjects and expert advisers. Although the safety record of the personnel transportation system studied is considered acceptable, there is low hanging fruit to be picked which can help improve the system's safety.

A question of our marketing or our preconceptions: commentary on the paper 'a strategy for human factors/ergonomics: developing the discipline and profession'.

PubMed

Nathanael, Dimitris; Marmaras, Nicolas

2012-01-01

The present paper is a commentary on the recently published IEA strategy for human factors/ergonomics (Dul, J., et al. (2012), A strategy for human factors/ergonomics: developing the discipline and profession. Ergonomics, 55(4), 377-395). Two main issues that demand attention are: (i) the way others understand our profession and discipline, and (ii) the way we understand our profession and added value to industry. First, it is advocated that the discussion on the future of human factors/ergonomics (HFE) should be focused more on the quality of the delivered value of HFE and less on its visibility and marketing. Second, the three fundamental characteristics of HFE, as proposed in the report, are discussed and the consequences of this proposal are further developed. Arguments are put forward on the endemic epistemological vagueness within the discipline and on the optimistic definition of its aim. Finally, a proposal is made at the epistemological level, which challenges some established convictions of the discipline. It is advocated that such an epistemological evolution may be necessary if HFE is to make progress towards contributing to system performance. The paper is a commentary on the IEA strategy for human factors/ergonomics. Issues discussed are, the way others understand our profession and the way we understand our profession and added value to industry. Some of the established convictions of the discipline are challenged and proposals are made to overcome these.

Effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders among computer workers: a randomized controlled trial.

PubMed

Esmaeilzadeh, Sina; Ozcan, Emel; Capan, Nalan

2014-01-01

The aim of the study was to determine effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders (WUEMSDs) among computer workers. Four hundred computer workers answered a questionnaire on work-related upper extremity musculoskeletal symptoms (WUEMSS). Ninety-four subjects with WUEMSS using computers at least 3 h a day participated in a prospective, randomized controlled 6-month intervention. Body posture and workstation layouts were assessed by the Ergonomic Questionnaire. We used the Visual Analogue Scale to assess the intensity of WUEMSS. The Upper Extremity Function Scale was used to evaluate functional limitations at the neck and upper extremities. Health-related quality of life was assessed with the Short Form-36. After baseline assessment, those in the intervention group participated in a multicomponent ergonomic intervention program including a comprehensive ergonomic training consisting of two interactive sessions, an ergonomic training brochure, and workplace visits with workstation adjustments. Follow-up assessment was conducted after 6 months. In the intervention group, body posture (p < 0.001) and workstation layout (p = 0.002) improved over 6 months; furthermore, intensity (p < 0.001), duration (p < 0.001), and frequency (p = 0.009) of WUEMSS decreased significantly in the intervention group compared with the control group. Additionally, the functional status (p = 0.001), and physical (p < 0.001), and mental (p = 0.035) health-related quality of life improved significantly compared with the controls. There was no improvement of work day loss due to WUEMSS (p > 0.05). Ergonomic intervention programs may be effective in reducing ergonomic risk factors among computer workers and consequently in the secondary prevention of WUEMSDs.

A Scott bench with ergonomic thorax stabilisation pad improves body posture during preacher arm curl exercise.

PubMed

Biscarini, Andrea; Benvenuti, Paolo; Busti, Daniele; Zanuso, Silvano

2016-05-01

We assessed whether the use of an ergonomic thorax stabilisation pad, during the preacher arm curl exercise, could significantly reduce the excessive shoulder protraction and thoracic kyphosis induced by the standard flat pad built into the existing preacher arm curl equipment. A 3D motion capture system and inclinometers were used to measure shoulder protraction and thoracic kyphosis in 15 subjects performing preacher arm curl with a plate-loaded machine provided with the standard flat pad. The same measures were repeated after replacing the flat pad with a new ergonomic pad, specifically designed to accommodate the thorax profile and improve body posture. Pad replacement significantly (p < 0.001) reduced shoulder protraction (from [Formula: see text] to [Formula: see text]) and thoracic kyphosis (from [Formula: see text] to [Formula: see text]), enabling postural and functional improvements within the entire spine, shoulder girdle and rib cage. The ergonomic pad may potentially allow a more effective training, prevent musculoskeletal discomfort and reduce the risk of injury. Practitioner summary: We have designed an ergonomic thorax stabilisation pad for the preacher arm curl exercise. The new ergonomic pad improves the poor posture conditions induced by the standard flat pad and may potentially allow a more effective training, prevent musculoskeletal discomfort, improve the breathing function and reduce the risk of injury.

The proactive approach--is it worthwhile? A prospective controlled ergonomic intervention study in office workers.

PubMed

Laestadius, Jasminka Goldoni; Ye, Jian; Cai, Xiaodong; Ross, Sandra; Dimberg, Lennart; Klekner, Meg

2009-10-01

Does proactive ergonomics program enhance office worker health and productivity? The investigation was conducted in connection with the move of 1500 office staff to a building with improved ergonomics. It was focused on associations between workstation features, working postures, musculoskeletal pain symptoms, and eye strain before and 18 months after implementation of a proactive ergonomic program. The outcomes were compared between the intervention and a similar reference group. Associations between improvement of postures and less musculoskeletal pain and eye strain were confirmed. A cross association between several features and postures and improved symptoms was noted, along with improved productivity. The study suggests that a proactive program adhering to the OSHA recommendations needs to include an individual workstation assessment to be effective in reducing symptoms and increasing productivity.

Participatory ergonomic intervention for prevention of low back pain: assembly line redesign case.

PubMed

Bernardes, João Marcos; Wanderck, Claudia; Moro, Antônio Renato Pereira

2012-01-01

This paper gives an overview of a participatory ergonomic intervention aimed at reducing low back pain cases in the dispatch department of a catalogue and e-commerce retail company. Based on the findings of the ergonomic analysis and design committee, the company's own employees redesigned the assembly line's layout. As a result of these changes two job tasks that involved manual material handling of boxes, identified by the revised NIOSH equation as posing an increased risk for lifting-related low back pain, were totally eliminated, and the employees responsible for moving boxes from the end of the assembly line to pallets on the ground were given more control over their jobs, and these jobs were also enriched with a new, less heavy task. These results demonstrate that participatory ergonomic interventions are a viable and effective strategy to reduce the exposure to work-related physical and psychosocial risk factors for low back pain.

The ergonomic relevance of anthropometrical proportions. Part I: body length measures.

PubMed

Küchmeister, Gerd; Behrenbruch, Kay; Ursula, Pieper; Leyk, Dieter

2009-06-01

Anthropometrical findings about proportions of the human body have a long tradition; most of them, however, are rather theoretical. To improve this situation a pragmatic and applicable definition of proportions, normal as well as deviating, is needed. The purpose of this paper is to set up three proportion types for body length measures: leggy-normal-stocky, and their rate in the population of adults in an industrial society (Germany). Based on queries of an actual anthropometrical database metrical limits for these three types are suggested regarding their influence on the most important body length measures in standing and sitting positions. The number of cases with normal proportions is about 60%, leggy and stocky types both reaching up to 20%. The metrical limits are proposed in order to account for differences between those proportion types which are relevant for ergonomics. When solving complex multidimensional design tasks (e.g. workplaces, vehicle interior design, personal equipment) users of anthropometrical data who do not have the opportunity to work with multivariate databases need supplementary information about the proportions of the human body. For this reason such supplementary information concerning proportions is being given here by physiological anthropologists. The application of the findings presented is exemplified in scenarios of ergonomic relevance.

A randomized controlled trial of the effect of participatory ergonomic low back pain training on workplace improvement

PubMed Central

Kajiki, Shigeyuki; Izumi, Hiroyuki; Hayashida, Kenshi; Kusumoto, Akira; Nagata, Tomohisa; Mori, Koji

2017-01-01

Objectives: This study aimed to determine the effects of participatory workplace improvement (PWI) -based provision of ergonomic training and ergonomic action checklists (ACLs) to on-site managers on workplace improvement activities for low back pain (LBP). Methods: A randomized controlled trial (RCT) was conducted at a manufacturing company in Japan. Teams entered in the study were randomly assigned to a control and an intervention group. A total of three interventional training sessions on methods of ergonomics were provided to on-site managers in the intervention group, with 1-month intervals between sessions. Ergonomic ACLs were provided at the same time. After completion of the training sessions, each team then provided a report of improvements each month for the next 10 months. Two people in charge of safety and health chose two major objectives of the implemented activities from the five categories. The reported number of improvements was analyzed using a Poisson regression model. Results: In the intervention group, although the incident rate ratio (IRR) of PWIs in countermeasures for the LBP category was significantly elevated after the training sessions, the IRR of improvements decreased over time during the 10-month follow-up period. No significant difference was observed in the IRR of total PWIs in either the control or intervention group. Conclusions: PWI-based provision of ergonomic training sessions and ergonomics ACLs to on-site managers was shown to be effective for workplace improvement activities targeted at LBP. However, because the effects decrease over time, efforts should be made to maintain the effects through regular interventions. PMID:28320978

A randomized controlled trial of the effect of participatory ergonomic low back pain training on workplace improvement.

PubMed

Kajiki, Shigeyuki; Izumi, Hiroyuki; Hayashida, Kenshi; Kusumoto, Akira; Nagata, Tomohisa; Mori, Koji

2017-05-25

This study aimed to determine the effects of participatory workplace improvement (PWI) -based provision of ergonomic training and ergonomic action checklists (ACLs) to on-site managers on workplace improvement activities for low back pain (LBP). A randomized controlled trial (RCT) was conducted at a manufacturing company in Japan. Teams entered in the study were randomly assigned to a control and an intervention group. A total of three interventional training sessions on methods of ergonomics were provided to on-site managers in the intervention group, with 1-month intervals between sessions. Ergonomic ACLs were provided at the same time. After completion of the training sessions, each team then provided a report of improvements each month for the next 10 months. Two people in charge of safety and health chose two major objectives of the implemented activities from the five categories. The reported number of improvements was analyzed using a Poisson regression model. In the intervention group, although the incident rate ratio (IRR) of PWIs in countermeasures for the LBP category was significantly elevated after the training sessions, the IRR of improvements decreased over time during the 10-month follow-up period. No significant difference was observed in the IRR of total PWIs in either the control or intervention group. PWI-based provision of ergonomic training sessions and ergonomics ACLs to on-site managers was shown to be effective for workplace improvement activities targeted at LBP. However, because the effects decrease over time, efforts should be made to maintain the effects through regular interventions.

A systematic review of workplace ergonomic interventions with economic analyses.

PubMed

Tompa, Emile; Dolinschi, Roman; de Oliveira, Claire; Amick, Benjamin C; Irvin, Emma

2010-06-01

This article reports on a systematic review of workplace ergonomic interventions with economic evaluations. The review sought to answer the question: "what is the credible evidence that incremental investment in ergonomic interventions is worth undertaking?" Past efforts to synthesize evidence from this literature have focused on effectiveness, whereas this study synthesizes evidence on the cost-effectiveness/financial merits of such interventions. Through a structured journal database search, 35 intervention studies were identified in nine industrial sectors. A qualitative synthesis approach, known as best evidence synthesis, was used rather than a quantitative approach because of the diversity of study designs and statistical analyses found across studies. Evidence on the financial merits of interventions was synthesized by industrial sector. In the manufacturing and warehousing sector strong evidence was found in support of the financial merits of ergonomic interventions from a firm perspective. In the administrative support and health care sectors moderate evidence was found, in the transportation sector limited evidence, and in remaining sectors insufficient evidence. Most intervention studies focus on effectiveness. Few consider their financial merits. Amongst the few that do, several had exemplary economic analyses, although more than half of the studies had low quality economic analyses. This may be due to the low priority given to economic analysis in this literature. Often only a small part of the overall evaluation of many studies focused on evaluating their cost-effectiveness.

Which causes more ergonomic stress: Laparoscopic or open surgery?

PubMed

Wang, Robert; Liang, Zhe; Zihni, Ahmed M; Ray, Shuddhadeb; Awad, Michael M

2017-08-01

There is increasing awareness of potential ergonomic challenges experienced by the laparoscopic surgeon. The purpose of this study is to quantify and compare the ergonomic stress experienced by a surgeon while performing open versus laparoscopic portions of a procedure. We hypothesize that a surgeon will experience greater ergonomic stress when performing laparoscopic surgery. We designed a study to measure upper-body muscle activation during the laparoscopic and open portions of sigmoid colectomies in a single surgeon. A sample of five cases was recorded over a two-month time span. Each case contained significant portions of laparoscopic and open surgery. We obtained whole-case electromyography (EMG) tracings from bilateral biceps, triceps, deltoid, and trapezius muscles. After normalization to a maximum voltage of contraction (%MVC), these EMG tracings were used to calculate average muscle activation during the open and laparoscopic segments of each procedure. Paired Student's t test was used to compare the average muscle activation between the two groups (*p < 0.05 considered statistically significant). Significant reductions in mean muscle activation in laparoscopic compared to open procedures were noted for the left triceps (4.07 ± 0.44% open vs. 2.65 ± 0.54% lap, 35% reduction), left deltoid (2.43 ± 0.45% open vs. 1.32 ± 0.16% lap, 46% reduction), left trapezius (9.93 ± 0.1.95% open vs. 4.61 ± 0.67% lap, 54% reduction), right triceps (2.94 ± 0.62% open vs. 1.85 ± 0.28% lap, 37% reduction), and right trapezius (10.20 ± 2.12% open vs. 4.69 ± 1.18% lap, 54% reduction). Contrary to our hypothesis, the laparoscopic approach provided ergonomic benefit in several upper-body muscle groups compared to the open approach. This may be due to the greater reach of laparoscopic instruments and camera in the lower abdomen/pelvis. Patient body habitus may also have less of an effect in the laparoscopic compared to open approach. Future studies

An ergonomic evaluation comparing desktop, notebook, and subnotebook computers.

PubMed

Szeto, Grace P; Lee, Raymond

2002-04-01

To evaluate and compare the postures and movements of the cervical and upper thoracic spine, the typing performance, and workstation ergonomic factors when using a desktop, notebook, and subnotebook computers. Repeated-measures design. A motion analysis laboratory with an electromagnetic tracking device. A convenience sample of 21 university students between ages 20 and 24 years with no history of neck or shoulder discomfort. Each subject performed a standardized typing task by using each of the 3 computers. Measurements during the typing task were taken at set intervals. Cervical and thoracic spines adopted a more flexed posture in using the smaller-sized computers. There were significantly greater neck movements in using desktop computers when compared with the notebook and subnotebook computers. The viewing distances adopted by the subjects decreased as the computer size decreased. Typing performance and subjective rating of difficulty in using the keyboards were also significantly different among the 3 types of computers. Computer users need to consider the posture of the spine and potential risk of developing musculoskeletal discomfort in choosing computers. Copyright 2002 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation

The influence of ergonomic factors and perceptual-motor abilities on handwriting performance.

PubMed

Tseng, M H; Cermak, S A

1993-10-01

Difficulty with handwriting is one of the most frequent reasons that children in the public schools are referred to occupational therapy. Current research on the influence of ergonomic factors, such as pencil grip and pressure, and perceptual-motor factors traditionally believed to affect handwriting, is reviewed. Factors such as visual perception show little relationship to handwriting, whereas tactile-kinesthetic, visual-motor, and motor planning appear to be more closely related to handwriting. By better understanding the ergonomic and perceptual-motor factors that contribute to and influence handwriting, therapists will be better able to design rationally based intervention programs.

Orchard evaluation of ergonomically modified apple bucket.

PubMed

Earle-Richardson, Giulia; Jenkins, Paul L; Strogatz, David; Bell, Erin M; Sorensen, Julie A; May, John J

2006-01-01

While preliminary laboratory tests indicate that a hip belt reduces the load on the back, neck and shoulders associated with musculoskeletal strain, an orchard trial is needed to more realistically assess both effectiveness and acceptability. to evaluate the hip belt's effectiveness in three areas: worker acceptance, worker productivity, and one-day muscle fatigue of the back and shoulder. Ninety-six New York apple harvest workers were randomly assigned to use the intervention hip belt or placebo belt for one week. In a second week all workers switched conditions. Subjects were interviewed at the end of each week to ascertain intervention acceptance. Employer records were reviewed to determine bushels picked per day. Subjects also underwent muscle fatigue testing at the beginning and again at the end of one workday during each week. Ninety-one percent of the subjects favored the intervention hip belt. Use of the intervention did not appreciably slow picking speed (bushels per hour) as compared to placebo (8.8 bu/ hr vs. 8.89 bu/hr). Both were significantly faster than the regular equipment condition (8.13 bu/hr). No significant differences in one-day muscle fatigue were found with intervention use. The belt was acceptable to the workers and did not hinder productivity. However, the anticipated ergonomic benefits were not demonstrable using one-day strength testing.

Occupational health hazards in the interventional laboratory: time for a safer environment.

PubMed

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Haines, David; Norbash, Alexander; Mauro, Matthew A; Goldstein, James A

2009-07-01

This document is a consensus statement by the major American societies of physicians who work in the interventional laboratory environment. It reviews available data on the prevalence of occupational health risks and summarizes ongoing epidemiologic studies designed to further elucidate these risks. Its purpose is to affirm that the interventional laboratory poses workplace hazards that must be acknowledged, better understood, and mitigated to the greatest extent possible. Vigorous efforts are advocated to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward minimizing operator radiation exposure, eliminating the need for personal protective apparel, and ending the orthopedic and ergonomic consequences of the interventional laboratory work environment.

Occupational health hazards in the interventional laboratory: time for a safer environment.

PubMed

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Haines, David; Norbash, Alexander; Mauro, Matthew A; Goldstein, James A

2009-02-15

This document is a consensus statement by the major American societies of physicians who work in the interventional laboratory environment. It reviews available data on the prevalence of occupational health risks and summarizes ongoing epidemiologic studies designed to further elucidate these risks. Its purpose is to affirm that the interventional laboratory poses workplace hazards that must be acknowledged, better understood, and mitigated to the greatest extent possible. Vigorous efforts are advocated to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward minimizing operator radiation exposure, eliminating the need for personal protective apparel, and ending the orthopedic and ergonomic consequences of the interventional laboratory work environment. Copyright SIR, 2009

Occupational health hazards in the interventional laboratory: time for a safer environment.

PubMed

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Haines, David; Norbash, Alexander; Mauro, Matthew A; Goldstein, James A

2009-02-01

This document is a consensus statement by the major American societies of physicians who work in the interventional laboratory environment. It reviews available data on the prevalence of occupational health risks and summarizes ongoing epidemiologic studies designed to further elucidate these risks. Its purpose is to affirm that the interventional laboratory poses workplace hazards that must be acknowledged, better understood, and mitigated to the greatest extent possible. Vigorous efforts are advocated to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward minimizing operator radiation exposure, eliminating the need for personal protective apparel, and ending the orthopedic and ergonomic consequences of the interventional laboratory work environment.

Perceived competence in computer use as a moderator of musculoskeletal strain in VDU work: an ergonomics intervention case.

PubMed

Tuomivaara, S; Ketola, R; Huuhtanen, P; Toivonen, R

2008-02-01

Musculoskeletal strain and other symptoms are common in visual display unit (VDU) work. Psychosocial factors are closely related to the outcome and experience of musculoskeletal strain. The user-computer relationship from the viewpoint of the quality of perceived competence in computer use was assessed as a psychosocial stress indicator. It was assumed that the perceived competence in computer use moderates the experience of musculoskeletal strain and the success of the ergonomics intervention. The participants (n = 124, female 58%, male 42%) worked with VDU for more than 4 h per week. They took part in an ergonomics intervention and were allocated into three groups: intensive; education; and reference group. Musculoskeletal strain, the level of ergonomics of the workstation assessed by the experts in ergonomics and amount of VDU work were estimated at the baseline and at the 10-month follow-up. Age, gender and the perceived competence in computer use were assessed at the baseline. The perceived competence in computer use predicted strain in the upper and the lower part of the body at the follow-up. The interaction effect shows that the intensive ergonomics intervention procedure was the most effective among participants with high perceived competence. The interpretation of the results was that an anxiety-provoking and stressful user-computer relationship prevented the participants from being motivated and from learning in the ergonomics intervention. In the intervention it is important to increase the computer competence along with the improvements of physical workstation and work organization.

The need for ergonomics considerations for the design and development of agricultural machinery in Thailand.

PubMed

Mamansari, D U; Salokhe, V M

1995-06-01

Agriculture plays an important role in developing countries which are mainly located in tropical regions. Agriculture is an industry with tremendous opportunities for the application of ergonomics principles. Working conditions are extremely difficult due to severe environmental conditions, long working hours, strenuous work and the use of mobile equipment. The ignorance of the majority of ergonomics principles in the design of agricultural equipment make the conditions more difficult. Thailand is one of the important suppliers of agricultural products in the world. Mechanization has expanded tremendously during the last 10 years and the number of agricultural machinery has rapidly increased. This paper looks at ergonomics principles which must be considered in the design and development of agricultural machines and equipment used in Thailand. It was identified that the common farming system in Thailand is rice-based cultivation, mostly in swampy conditions with heavy clay soil. It was also found that the most energy-consuming task in agriculture was primary cultivation. The most widely used machine is a power tiller which is suitable for the farm sizes available and can be operated easily. Most of the power tillers and other equipment were found to be locally made, with less than 5% imported. Unfortunately, there was no standardization in power tiller manufacturing which led to increasing farmers' strain. There is still a need to collect more ergonomics data of Thai farmers such as anthropometry, strength and physical work capacity for the design and development of agricultural machines and equipment used in Thailand. Different ergonomic consideration for the design and development of agricultural machinery have been suggested.

Easy Ergonomics: A Guide to Selecting Non-Powered Hand Tools

MedlinePlus

... identifying the presence or absence of basic ergonomic design features (Dababneh et al.*). The right tool will ... Cal/OSHA). Both agencies recognize the importance of design and selection of hand tools in strategies to ...

Office ergonomics training and a sit-stand workstation: effects on musculoskeletal and visual symptoms and performance of office workers.

PubMed

Robertson, Michelle M; Ciriello, Vincent M; Garabet, Angela M

2013-01-01

Work Related Musculoskeletal Disorders (WMSDs) among office workers with intensive computer use is widespread and the prevalence of symptoms is growing. This randomized controlled trial investigated the effects of an office ergonomics training combined with a sit-stand workstation on musculoskeletal and visual discomfort, behaviors and performance. Participants performed a lab-based customer service job for 8 h per day, over 15 days and were assigned to: Ergonomics Trained (n = 11) or Minimally Trained (n = 11). The training consisted of: a 1.5-h interactive instruction, a sit/stand practice period, and ergonomic reminders. Ergonomics Trained participants experienced minimal musculoskeletal and visual discomfort across the 15 days, varied their postures, with significantly higher performance compared to the Minimally Trained group who had a significantly higher number of symptoms, suggesting that training plays a critical role. The ability to mitigate symptoms, change behaviors and enhance performance through training combined with a sit-stand workstation has implications for preventing discomforts in office workers. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Flexible workspace design and ergonomics training: impacts on the psychosocial work environment, musculoskeletal health, and work effectiveness among knowledge workers.

PubMed

Robertson, Michelle M; Huang, Yueng-Hsiang; O'Neill, Michael J; Schleifer, Lawrence M

2008-07-01

A macroergonomics intervention consisting of flexible workspace design and ergonomics training was conducted to examine the effects on psychosocial work environment, musculoskeletal health, and work effectiveness in a computer-based office setting. Knowledge workers were assigned to one of four conditions: flexible workspace (n=121), ergonomics training (n=92), flexible workspace+ergonomics training (n=31), and a no-intervention control (n=45). Outcome measures were collected 2 months prior to the intervention and 3 and 6 months post-intervention. Overall, the study results indicated positive, significant effects on the outcome variables for the two intervention groups compared to the control group, including work-related musculoskeletal discomfort, job control, environmental satisfaction, sense of community, ergonomic climate, communication and collaboration, and business process efficiency (time and costs). However, attrition of workers in the ergonomics training condition precluded an evaluation of the effects of this intervention. This study suggests that a macroergonomics intervention is effective among knowledge workers in office settings.

How could you use the ergonomics 'knowhow' transfer management to enhance human working for sustainable improvements in industrially developing countries?

PubMed

Helali, Faramarz

2012-01-01

This paper describes the different strategic understanding from getting ergonomics intervention programmes' conversations to 'Tip', including minimizing strategies; tipping point strategies; and maximizing strategies from building ergonomics intervention techniques. Those have indicated to different recognitions: 1) when amplification of the 'problem' is necessary; 2) when amplification of the 'tipping point' is necessary, and 3) when amplification of the 'success' is necessary. The practical applications and implications of the ergonomics intervention techniques are drawn from the findings of framing positive questions: 1) what is successful ergonomics intervention technique right now (Appreciative)? 2) What do we need to change for a better future (Imagine)? 3) How do we do this (Design)? 4) Who takes action and with what consequences (Act)? This requires re-framing of the ergonomics intervention techniques in an appreciative way, because of, the future action needs to be inspired by those things that participants feel are worth valuing, worth celebrating and sustaining.

Ergonomic practices within patient care units are associated with musculoskeletal pain and limitations

PubMed Central

Dennerlein, Jack T.; Hopcia, Karen; Sembajwe, Grace; Kenwood, Christopher; Stoddard, Anne M.; Tveito, T. Helene; Hashimoto, Dean M.; Sorensen, Glorian

2013-01-01

Background With the high prevalence of musculoskeletal disorders (MSDs) for patient care unit workers, prevention efforts through ergonomic practices within units may be related to symptoms associated with typical work-related MSDs. Methods We completed a cross-sectional survey of patient care workers (n=1572) in two large academic hospitals in order to evaluate relationships between self-reported musculoskeletal pain, work interference due to this pain, and limitations during activities of daily living (functional limitations) and with ergonomic practices and other organizational policy and practices metrics within the unit. Bivariate and multiple logistic regression analyses tested the significance of these associations. Results Prevalence of self-reported musculoskeletal symptoms in the past 3-months was 74% with 53% reporting pain in the low back. 32.8% reported that this pain interfered with their work duties and 17.7% reported functional limitations in the prior week. Decreased ergonomic practices were significantly associated with reporting pain in four body areas (low back, neck/shoulder, arms, and lower extremity) in the previous 3-months, interference with work caused by this pain, symptom severity and limitations in completing activities of daily living in the past week. Except for low back pain and work interference, these associations remained significant when psychosocial covariates such as psychological demands were included in multiple logistic regressions, Conclusions Ergonomic practices appear to be associated with many of the musculoskeletal symptoms denoting their importance for prevention efforts in acute health care settings. PMID:22113975

Face, content, and construct validity of a novel portable ergonomic simulator for basic laparoscopic skills.

PubMed

Xiao, Dongjuan; Jakimowicz, Jack J; Albayrak, Armagan; Buzink, Sonja N; Botden, Sanne M B I; Goossens, Richard H M

2014-01-01

Laparoscopic skills can be improved effectively through laparoscopic simulation. The purpose of this study was to verify the face and content validity of a new portable Ergonomic Laparoscopic Skills simulator (Ergo-Lap simulator) and assess the construct validity of the Ergo-Lap simulator in 4 basic skills tasks. Four tasks were evaluated: 2 different translocation exercises (a basic bimanual exercise and a challenging single-handed exercise), an exercise involving tissue manipulation under tension, and a needle-handling exercise. Task performance was analyzed according to speed and accuracy. The participants rated the usability and didactic value of each task and the Ergo-Lap simulator along a 5-point Likert scale. Institutional academic medical center with its affiliated general surgery residency. Forty-six participants were allotted into 2 groups: a Novice group (n = 26, <10 clinical laparoscopic procedures) and an Experienced group (n = 20, >50 clinical laparoscopic procedures). The Experienced group completed all tasks in less time than the Novice group did (p < 0.001, Mann-Whitney U test). The Experienced group also completed tasks 1, 2, and 4 with fewer errors than the Novice group did (p < 0.05). Of the Novice participants, 96% considered that the present Ergo-Lap simulator could encourage more frequent practice of laparoscopic skills. In addition, 92% would like to purchase this simulator. All of the experienced participants confirmed that the Ergo-Lap simulator was easy to use and useful for practicing basic laparoscopic skills in an ergonomic manner. Most (95%) of these respondents would recommend this simulator to other surgical trainees. This Ergo-Lap simulator with multiple tasks was rated as a useful training tool that can distinguish between various levels of laparoscopic expertise. The Ergo-Lap simulator is also an inexpensive alternative, which surgical trainees could use to update their skills in the skills laboratory, at home, or in the office

The influence of ergonomic devices on mechanical load during patient handling activities in nursing homes.

PubMed

Koppelaar, Elin; Knibbe, Hanneke J J; Miedema, Harald S; Burdorf, Alex

2012-07-01

Mechanical load during patient handling activities is an important risk factor for low back pain among nursing personnel. The aims of this study were to describe required and actual use of ergonomic devices during patient handling activities and to assess the influence of these ergonomic devices on mechanical load during patient handling activities. For each patient, based on national guidelines, it was recorded which specific ergonomic devices were required during distinct patient handling activities, defined by transferring a patient, providing personal care, repositioning patients in the bed, and putting on and taking off anti-embolism stockings. During real-time observations over ~60 h among 186 nurses on 735 separate patient handling activities in 17 nursing homes, it was established whether ergonomic devices were actually used. Mechanical load was assessed through observations of frequency and duration of a flexed or rotated trunk >30° and frequency of pushing, pulling, lifting or carrying requiring forces <100 N, between 100 and 230 N, and >230 N from start to end of each separate patient handling activity. The number of patients and nurses per ward and the ratio of nurses per patient were used as ward characteristics with potential influence on mechanical load. A mixed-effect model for repeated measurements was used to determine the influence of ergonomic devices and ward characteristics on mechanical load. Use of ergonomic devices was required according to national guidelines in 520 of 735 (71%) separate patient handling activities, and actual use was observed in 357 of 520 (69%) patient handling activities. A favourable ratio of nurses per patient was associated with a decreased duration of time spent in awkward back postures during handling anti-embolism stocking (43%), patient transfers (33%), and personal care of patients (24%) and also frequency of manually lifting patients (33%). Use of lifting devices was associated with a lower frequency of forces

Ergonomics in the development and implementation of organisational strategy for sustainability.

PubMed

Ryan, Brendan; Wilson, John R

2013-01-01

This is the first phase of an ergonomics study of sustainability in a rail organisation, particularly environmental sustainability. The main emphasis has been on the use of a qualitative approach to carry out in-depth consultation with those in influential and policy setting roles in the organisation, collecting and analysing perceptions on sustainability policy and related business processes. The study identified factors affecting implementation of policy on sustainability and these have been developed to produce a list of requirements for implementing the policy. The findings are valuable in understanding the range of attitudes, aspirations and perceived constraints, from the perspective of those in senior roles in the company, and development of a sustainability strategy for a rail infrastructure owner. There is need for wider consultation, both within the organisation and externally, to validate and refine the understanding of barriers to the implementation of the policy. The role of ergonomics in supporting the work on sustainability is discussed. The study collects in-depth views from senior managers on the challenges of implementing a policy on sustainability in a rail organisation. Outputs include a list of factors affecting implementation of policy and requirements for better implementation of policy in this area. Potential contributions of ergonomics to sustainability in organisational contexts are discussed.

Surveying the comfort perception of the ergonomic design of bluetooth earphones.

PubMed

Chiu, Hsiao-Ping; Chiang, Hsin-Yu; Liu, Chien-Hsiou; Wang, Ming-Hsu; Chiou, Wen-Ko

2014-01-01

Bluetooth earphones can facilitate communications among workers engaged in manual (e.g., professional driver)or visual tasks (e.g., security guard). If workers remove their Bluetooth earphones due to poor fit, then communication effectiveness will decline, especially during manual or visual tasks. (1) To identify which design properties of Bluetooth earphones can contribute to user comfort, and (2) to identify if person characteristics (i.e., gender and ear shapes in this study) are related to differences in comfort perception during earphone use. 198 participants were recruited for this study.Individuals used four models of Bluetooth earphones in randomized order while performing computer tasks and then completed questionnaires on comfort perception specifically designed for this study. The 2 × 3 × 4 mixed design analysis of variance (ANOVA) was conducted to investigate the effects of gender, ear shape, and model condition. The results indicated that there were significant differences in model on comfort perception. For earplugs, the shape of the earphone and the elasticity of material are important ergonomic concerns to improve the comfort perception. In addition, the adjustable tail length is an important ergonomic design property for the ear-hook. The information gained in this study should be useful in improving the ergonomic fitness of Bluetooth earphones.

The Medical Interaction Laboratory--Multidiscipline Approach for Presentation of Principles of Physiology and Pharmacology.

ERIC Educational Resources Information Center

Oliver, Jack W.; Sims, Michael H.

1979-01-01

An interdisciplinary physiology and pharmacology course presented by the Medical Interaction Laboratory at the University of Tennessee College of Veterinary Medicine provides interaction among faculty, conserves faculty time and animal expense, and presents a coordinated laboratory experience. (BH)

Ergonomics and sustainability--challenges from global supply chains.

PubMed

Hasle, Peter; Jensen, Per Langaa

2012-01-01

The development of globalised supply chains is a major challenge for sustainability. For several years, there has been discussion within the profession whether and how ergonomics and human factors can play a role. Based on our research, we have identified five major challenges from global supply chains especially related to the social aspects of sustainability: (1) criteria for social sustainability, (2) the role of key performance indicators in the management of supply chains, (3) the constant changes in supply chains, (4) the challenge in establishing participation, and (5) the development of agency and regulatory mechanisms. There are obviously no clear and simple solutions to these challenges. One possible avenue for progress might lie in acquiring a greater understanding of the challenges from global supply chains and developing a strategy which combines social and long-term business sustainability. Starting from such a basis, the next step would be to find ways for the ergonomics and human factors community to create international collaboration which can impact specific global supply chains.

From an urologist view: are we safe with endoscopic surgery? Overview of ergonomic problems encountered by the urologist during video endoscopic surgery.

PubMed

Sataa, Sallami; Benzarti, Aida; Ben Jemaa, Abdelmajid

2012-12-01

The importance of minimally invasive surgery in urology has constantly increased in the last 20 years. Endoscopic resection of prostate and bladder tumors is actually a gold standard with many advantages for patients. To analyze the problems related to the ergonomic conditions faced by urologist during video endoscopic surgery by review of the recent literature. All evidence-based experimental ergonomic studies conducted in the fields of urology endoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches. Data from ergonomic studies were evaluated in terms of efficiency as well as comfort and safety aspects. Constraint postures for urologists are described and ergonomic requirements for optimal positions are discussed. The ergonomics of urological endoscopic surgery place urologists at risk for potential injury. The amount of neck flexion or extension, the amount of shoulder girdle adduction or abduction used, and stability of the upper extremities during surgery; which are maintained in a prolonged static posture; are the main risk factors. All these constraints may lead to muscle and joint fatigue, pain, and eventual musculoskeletal injury. Moreover, these issues may impact surgical accuracy. Urologist posture, operating period, training are important ergonomic factor during video surgery to prevent musculoskeletal disorders.

Wrong postural hygiene and ergonomics in dental students of the University of Valencia (Spain) (part I).

PubMed

Cervera-Espert, J; Pascual-Moscardó, A; Camps-Alemany, I

2018-02-01

Failure to adopt a correct working posture can lead to occupational diseases. Evaluate knowledge in relation to ergonomics about BHOP concept and its application to routine clinical practice amongst undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain). A study based on interviews of undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain) was carried out. The information from a total of 336 interviews was used for the statistical analysis, differentiating according to gender and academic year: knowledge of ergonomics, pain prevalence and antecedents, assessment of the possible necessity for improved training in ergonomics, and evaluation of postural hygiene. Only 28.6% of the students were found to sit correctly in the dentist chair. Furthermore, in the opinion of the students, very few subjects during the career afforded adequate teaching in relation to ergonomics and working posture. The analysis of postural hygiene showed great variability. There were no significant differences in posture between males and females, although some incorrect postures appeared to be associated with the academic year (P<.05). However, no significant improvements in postural hygiene were noted on progressing from one academic year to the next. The students in our study were not familiar with the principles of ergonomics and did not sit correctly in the dentist chair. Improved training in this field is required in dental school. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Contributions of participatory ergonomics to the improvement of safety culture in an industrial context.

PubMed

Lallemand, Carine

2012-01-01

This paper presents the results of an ergonomic intervention conducted within a blast furnace plant. As part of its risk prevention program, the company decided to set up an action plan, in a participatory manner, by setting up working groups to solve health & safety issues. This field mission involved 230 employees, 80 of whom participated actively by being incorporated into working groups. After four months of intervention, a questionnaire survey has been conducted among employees to study the effects of participation on the safety climate. The results seem promising and show that the benefits of participation are numerous: a more positive safety climate associated to safer attitudes and behaviors. However, rather than just participation, it seems to be the employee involvement in the working groups and the satisfaction they derive from their participation that guarantee these positive results. Hence, participatory ergonomics seems to be an effective way to decrease the number of unsafe behaviors at work, provided that the type of participation has been previously well defined and organized according to the specific context of each organization.

Ergonomic risk factor identification for sewing machine operators through supervised occupational therapy fieldwork in Bangladesh: A case study.

PubMed

Habib, Md Monjurul

2015-01-01

Many sewing machine operators are working with high risk factors for musculoskeletal health in the garments industries in Bangladesh. To identify the physical risk factors among sewing machine operators in a Bangladeshi garments factory. Sewing machine operators (327, 83% female), were evaluated. The mean age of the participants was 25.25 years. Six ergonomic risk factors were determined using the Musculoskeletal Disorders risk assessment. Data collection included measurements of sewing machine table and chair heights; this data was combined with information from informal interviews. Significant ergonomic risk factors found included the combination of awkward postures of the neck and back, repetitive hand and arm movements, poor ergonomic workstations and prolonged working hours without adequate breaks; these risk factors resulted in musculoskeletal complaints, sick leave, and switching jobs. One aspect of improving worker health in garment factories includes addressing musculoskeletal risk factors through ergonomic interventions.

Ergonomics and design for sustainability in healthcare: ambient assisted living and the social-environmental impact of patients lifestyle.

PubMed

Andreoni, Giuseppe; Arslan, Pelin; Costa, Fiammetta; Muschiato, Sabrina; Romero, Maximiliano

2012-01-01

This work presents considerations on Ergonomics and Design for Sustainability in the healthcare field based on research experiences of the Technology and Design for Healthcare (TeDH) research group of INDACO (Industrial design, communication, arts and fashion) department of Politecnico di Milano. In order to develop a multidisciplinary approach to design able to answer to specific user needs such as elderly in an environmental sustainable way (1) this paper shows the results we achieved concerning ergonomics and environmental impact in product development (2), the extension of this approach to interior and home design and the advantage of the application of Information Communication Technologies (ICT). ICT can help people with special needs to make their everyday life easier and more safe, at the same time, ICT can make social-environmental impact of everyday behavior evident and can be applied to manage sustainability. The specific theme is thus to integrate ergonomics and sustainability competences in the development of Ambient Assisted Living through a Product- Service System approach. The concept of product service system has the potential to improve product performances and services, establish new relations and networks with different actors in order to satisfy user needs and apply a systems approach considering environmental, social and economic factors in the users' environment.

A Novel Approach to Supporting Relationship-Centered Care Through Electronic Health Record Ergonomic Training in Preclerkship Medical Education

PubMed Central

Silverman, Howard; Ho, Yun-Xian; Kaib, Susan; Ellis, Wendy Danto; Moffitt, Marícela P.; Chen, Qingxia; Nian, Hui; Gadd, Cynthia S.

2014-01-01

Problem How can physicians incorporate the electronic health record (EHR) into clinical practice in a relationship-enhancing fashion (“EHR ergonomics”)? Approach Three convenience samples of 40 second-year medical students with varying levels of EHR ergonomic training were compared in the 2012 spring semester. All participants first received basic EHR training and completed a pre-survey. Two study groups were then instructed to use the EHR during the standardized patient (SP) encounter in each of four regularly scheduled Doctoring (clinical skills) course sessions. One group received additional ergonomic training in each session. Ergonomic assessment data were collected from students, faculty, and SPs in each session. A post-survey was administered to all students, and data were compared across all three groups to assess the impact of EHR use and ergonomic training. Outcomes There was a significant positive effect of EHR ergonomics skills training on students’ relationship-centered EHR use (P < .005). Students who received training reported that they were able to use the EHR to engage with patients more effectively, better articulate the benefits of using the EHR, better address patient concerns, more appropriately position the EHR device, and more effectively integrate the EHR into patient encounters. Additionally, students’ self-assessments were strongly corroborated by SP and faculty assessments. A minimum of three ergonomic training sessions was needed to see an overall improvement in EHR use. Next Steps In addition to replication of these results, further effectiveness studies of this educational intervention need to be carried out in GME, practice, and other environments. PMID:24826851

Evaluation of Work-related Psychosocial and Ergonomics Factors in Relation to Low Back Discomfort in Emergency Unit Nurses

PubMed Central

Habibi, Ehsanollah; Pourabdian, Siamak; Atabaki, Azadeh Kianpour; Hoseini, Mohsen

2012-01-01

Background and Aim: High prevalence of low back pain is one of the most common problems among nurses. The aim of this study was to evaluate the relation of the intensity of low back discomfort to two low back pain contributor factors (Ergonomics risk factors and psychosocial factors). Methods: This cross-sectional survey was conducted on 120 emergency unit nurses in Esfahan. Job content, ergonomics hazards and nordic questionnaire were used in that order for daily assessment of Psychosocial and Ergonomics factors and the intensity of low back discomfort. Nurses were questioned during a 5-week period, at the end of each shift work. The final results were analyzed with SPSS software18/PASW by using Spearman, Mann-Whitney and Kolmogorov-Smirnove test. Results: There was a significant relationship between work demand, job content, social support and intensity of low back discomfort (P value <0.05). But, there was not any link between intensity of low back discomfort and job control. Also, there was significant relationship between intensity of low back discomfort and ergonomics risk factors. Conclusion: This study showed an indirect relationship between the intensity of low back discomfort and social support. This study also confirmed a direct relationship between the intensity of low back discomfort and work demand, job content, ergonomics factors (Awkward Postures (rotating and bending), manual patient handling and repetitiveness, standing continuously more than 30 min). So, to decrease work related low back discomfort, psychosocial factors should be attended in addition to ergonomics factors. PMID:22973487

Preliminary study of ergonomic behavior during simulated ultrasound-guided regional anesthesia using a head-mounted display.

PubMed

Udani, Ankeet D; Harrison, T Kyle; Howard, Steven K; Kim, T Edward; Brock-Utne, John G; Gaba, David M; Mariano, Edward R

2012-08-01

A head-mounted display provides continuous real-time imaging within the practitioner's visual field. We evaluated the feasibility of using head-mounted display technology to improve ergonomics in ultrasound-guided regional anesthesia in a simulated environment. Two anesthesiologists performed an equal number of ultrasound-guided popliteal-sciatic nerve blocks using the head-mounted display on a porcine hindquarter, and an independent observer assessed each practitioner's ergonomics (eg, head turning, arching, eye movements, and needle manipulation) and the overall block quality based on the injectate spread around the target nerve for each procedure. Both practitioners performed their procedures without directly viewing the ultrasound monitor, and neither practitioner showed poor ergonomic behavior. Head-mounted display technology may offer potential advantages during ultrasound-guided regional anesthesia.

Stereoscopic displays for virtual reality in the car manufacturing industry: application to design review and ergonomic studies

NASA Astrophysics Data System (ADS)

Moreau, Guillaume; Fuchs, Philippe

2002-05-01

In the car manufacturing industry the trend is to drastically reduce the time-to-market by increasing the use of the Digital Mock-up instead of physical prototypes. Design review and ergonomic studies are specific tasks because they involve qualitative or even subjective judgements. In this paper, we present IMAVE (IMmersion Adapted to a VEhicle) designed for immersive styling review, gaps visualization and simple ergonomic studies. We show that stereoscopic displays are necessary and must fulfill several constraints due to the proximity and size of the car dashboard. The duration fo the work sessions forces us to eliminate all vertical parallax, and 1:1 scale is obviously required for a valid immersion. Two demonstrators were realized allowing us to have a large set of testers (over 100). More than 80% of the testers saw an immediate use of the IMAVE system. We discuss the good and bad marks awarded to the system. Future work include being able to use several rear-projected stereo screens for doors and central console visualization, but without the parallax presently visible in some CAVE-like environments.

The application of an industry level participatory ergonomics approach in developing MSD interventions.

PubMed

Tappin, D C; Vitalis, A; Bentley, T A

2016-01-01

Participatory ergonomics projects are traditionally applied within one organisation. In this study, a participative approach was applied across the New Zealand meat processing industry, involving multiple organisations and geographical regions. The purpose was to develop interventions to reduce musculoskeletal disorder (MSD) risk. This paper considers the value of an industry level participatory ergonomics approach in achieving this. The main rationale for a participative approach included the need for industry credibility, and to generate MSD interventions that address industry level MSD risk factors. An industry key stakeholder group became the primary vehicle for formal participation. The study resulted in an intervention plan that included the wider work system and industry practices. These interventions were championed across the industry by the key stakeholder group and have extended beyond the life of the study. While this approach helped to meet the study aim, the existence of an industry-supported key stakeholder group and a mandate for the initiative are important prerequisites for success. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics content in the physical education teacher's guide in Rwanda.

PubMed

Nellutla, Manobhiram; Patel, Hetal; Kabanda, Aline; Nuhu, Assuman

2012-01-01

An important aspect that affects the effectiveness of ergonomic programs is that inefficient mechanical functioning start at an early age and that back pain and posture problems are already evident in children. Children, from a very early age, as well as adults spend an ever increasing amount of their time in front of computer and television screens. The cumulative effect of this sedentary lifestyle leads to improper posture, as well as inefficient and harmful movement patterns and loss of basic physical skills. Physical Education course should deal not only with sports and physical activities, but also with broader aspects of life-skills and physical functionality. It should offer a solution to the modern technology-based society. Keeping this in perspective, Ergonomics content was introduced in Physical Education Teacher's Guide in Rwandan schools with an aim in preventing musculoskeletal disorder in children.

The demands and benefits of ergonomics in Sri Lankan apparel industry: A case study at MAS holdings.

PubMed

Abeysekera, John; Illankoon, Prasanna

2016-10-17

Apparel exports bring in sizeable foreign income to Sri Lanka. To protect and promote this industry is a paramount need. This can be carried out by applying Human Factors/Ergonomics (HFE) which has proved to control negative effects at work places. This paper reports a case study which describes the demands and benefits of HFE in MAS Holdings which owns a large share of the apparel industry in Sri Lanka. The study consisted of walk through observation survey, a questionnaire survey and ergonomic work place analysis followed by a training programme to selected employees in three companies. Positive responses to questionnaires revealed good ergonomic practices in the work places surveyed. Ergonomically unfit chairs and potential hazards e.g. exposure to noise and hot environment were detected. It is seen that MAS have introduced strategies originated by Toyota Production System viz. 5S, Kaizen, six sigma etc., which are in fact ergonomic methods. A progressive project MAS boast of viz. 'MAS Operating System' (MOS) empowers training and development to employees. MAS Holdings has adequately realized the benefits of applying HFE as evident by the number of awards received. Relevant companies were advised to take appropriate corrective measures to control the potential hazards.

Ergonomics Risk Assessment among support staff in Universiti Malaysia Pahang

NASA Astrophysics Data System (ADS)

Jusoh, Faisal; Nafis Osman Zahid, Muhammed

2018-03-01

Awareness of ergonomic risk assessment among workers are getting intense in many industries nowadays. It is essential since most of the workers spend 7 to 8 hours of their time in the workplaces. Previous study shown that spending too much time with static posture in sitting at workplace leads to the problem of Musculoskeletal Disorders (MSDs). The implications are not only harmful to human body but also effect the productivity. Currently, there are no scientific study conducted to assess the conditions of workers in Universiti Malaysia Pahang (UMP). Therefore, the problem of MSDs could not be justified clearly and the top management did not acknowledge this issue. This study aims to present current scenario of ergonomic risk level at UMP by using structured model. It focuses on operational staff from faculties and Human Resources Department (HRD). Initially, three types of assessments are executed based on general working condition, Cornell Muscokeletal Discomfort Questionnaire (CMDQ) and Rapid Office Strain Assessment (ROSA). Based on the findings, 90% of the respondents felt discomfort at workplace but prefer to rectify the issues by themselves. Almost 50% of them evaluated themselves in level 4-5 of discomfort level. The CMDQ result shown the discomfort area at faculties and HRD. The workplace at faculties and HRD had been assessed through ROSA and the overall result shown the risk level is medium level respectively. Therefore, further investigation is requires and improvement of workplace need to be proposed to establish good working condition.

[Research progresses on ergonomics assessment and measurement methods for push-pull behavior].

PubMed

Zhao, Yan; Li, Dongxu; Guo, Shengpeng

2011-10-01

Pushing and pulling (P&P) is a common operating mode of operator's physical works, and plays an important role in evaluation of human behavior health and operation performance. At present, there are many research methods of P&P, and this article is a state-of-art review of the classification of P&P research methods, the various impact factors in P&P program, technical details of internal/external P&P force measurement and evaluation, the limitation of current research methods and the future developments in the ergonomics field.

Ergonomics support for local initiative in improving safety and health at work: International Labour Organization experiences in industrially developing countries.

PubMed

Kawakami, T; Kogi, K

2005-04-15

Ergonomics has played essential roles in the technical cooperation activities of the International Labour Organization (ILO) in occupational safety and health in industrially developing countries. Ergonomics support focusing on practical day-to-day needs at the grass-root workplace has strengthened the local initiative in improving safety and health. Practical action-tools such as ergonomics checklists, local good example photos and group discussions have assisted workers and employers in identifying feasible solutions using locally available resources. Direct participation of workers and employers has been promoted in ergonomics training aimed at immediate solutions. ILO Guidelines on Occupational Safety and Health Management Systems have played increasingly important roles in the systematic planning of local improvement actions. Policy-level programmes to develop network support mechanisms to the grass-root workplace were essential for following up and sustaining local achievements. Practical ergonomics support tools, such as action checklists and low-cost improvement guides, should be developed and widely applied so as to reach grass-root levels and help local people create safer and healthier workplaces.

C.A.D. and ergonomic workstations conception

NASA Astrophysics Data System (ADS)

Keravel, Francine

1986-07-01

Computer Aided Design is able to perform workstation's conception. An ergonomic data could be complete this view and warrant a coherent fiability conception. Complexe form representation machines, anthropometric data and environment factors are allowed to perceive the limit points between humain and new technology situation. Work ability users, safety, confort and human efficiency could be also included. Such a programm with expert system integration will give a complete listing appreciation about workstation's conception.

Effect of ergonomics training on agreement between expert and nonexpert ratings of the potential for musculoskeletal harm in manufacturing tasks.

PubMed

Fethke, Nathan B; Merlino, Linda; Gerr, Fred

2013-12-01

To evaluate the effect of ergonomics training on non-ergonomists' ability to recognize and characterize the potential for musculoskeletal harm in manufacturing tasks. Ergonomics training was delivered to members of a participatory ergonomics team in a manufacturing facility. Before and after training, participatory ergonomics team members and the research team rated the potential for musculoskeletal harm for each of 30 tasks. Measures of agreement included Pearson, concordance, and intraclass correlation coefficients. Measures of agreement generally improved after training. The greatest agreement was observed for ratings of the potential for musculoskeletal harm to the low back. The greatest improvement in agreement was observed for ratings of the potential for musculoskeletal harm to the neck/shoulder. The training seemed to improve non-experts' ability to identify the potential for musculoskeletal harm.

Ergonomics: safe patient handling and mobility.

PubMed

Hallmark, Beth; Mechan, Patricia; Shores, Lynne

2015-03-01

This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care. Copyright © 2015 Elsevier Inc. All rights reserved.

Limited economic evaluation to assess the effectiveness of a university-wide office ergonomics program.

PubMed

Bidassie, Balmatee; McGlothlin, James D; Goh, Alina; Feyen, Robert G; Barany, James W

2010-05-01

The objective of this research was to evaluate the effectiveness and provide a limited economic evaluation of an office ergonomics program at a major university from 1995 to 2007. The relationship between office-related recordable injuries, reported lost time, severity of these injuries, and the Workers' Compensation (WC) paid was analyzed and the corresponding incident cost was calculated. Two major datasets analyzed were OSHA 200/300 logs (1991-2007) and WC claims paid (1999-2007). Since the beginning of the office ergonomics program in 1995 and through 2007 (13-year period), the number of office cumulative trauma disorder (CTD) cases decreased by 53%. Since the official start (in 1999) of a 50-50 cost share agreement for office equipment purchases between the university's Safety and Health Department (SHD) and the university departments evaluated, it was observed that the incident rate decreased by 63%, Total Days Away/restrict or Transfer (DART) rate decreased by 41%, Lost Time Case (LTC) rate decreased by 71% and office-related carpal tunnel syndrome decreased by almost 50%. The long-term goal of this research is to demonstrate the self-sustainability of an office ergonomics program by showing that equipment costs are eventually offset by a decrease in WC claims paid and lost time from office-related injuries and illnesses. While limited, this research helps in cost-justifying the implementation of future office ergonomics programs for large organizations. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Ergonomic work analysis: A case study of bus drivers in the private collective transportation sector.

PubMed

Araújo, Adolfo Vicente; Arcanjo, Gemima Santos; Fernandes, Haroldo; Arcanjo, Georgia Santos

2018-05-03

The collective transportation system is essential to reduce the number of automobiles in the roads. Concerns exist related to quality, comfort and safety of bus driver's workstations. The objective of this study was to improve the driver's workstation in the private collective transportation sector by analyzing ergonomic practices using the Ergonomic Work Analysis (EWA). The EWA was chosen because it seeks to evaluate the labor condition as it relates to the psychophysiological conditions of workers, it complies with regulatory standard 17 (NR17). To identify driver concerns, interviews and questionnaires were administered. The workstation and worker routines were observed. The analysis revealed that the largest number of complaints related to noise, display light and location of the passenger identifier device. Drivers reported discomfort in the knees and lower back. Recommendations were made to improve the workstation and change the routine to minimize the discomfort and ergonomic risk factors.

Determination of an Ergonomically Sound Glovebox Glove Port Center Line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christman, Marissa St; Land, Whitney Morgan

2016-11-30

Determine an ergonomic glovebox glove port center line location which will be used for standardization in new designs, thus allowing for predictable human work performance, reduced worker exposure to radiation and musculoskeletal injury risks, and improved worker comfort, efficiency, health, and safety.

Soft Electronics Enabled Ergonomic Human-Computer Interaction for Swallowing Training

NASA Astrophysics Data System (ADS)

Lee, Yongkuk; Nicholls, Benjamin; Sup Lee, Dong; Chen, Yanfei; Chun, Youngjae; Siang Ang, Chee; Yeo, Woon-Hong

2017-04-01

We introduce a skin-friendly electronic system that enables human-computer interaction (HCI) for swallowing training in dysphagia rehabilitation. For an ergonomic HCI, we utilize a soft, highly compliant (“skin-like”) electrode, which addresses critical issues of an existing rigid and planar electrode combined with a problematic conductive electrolyte and adhesive pad. The skin-like electrode offers a highly conformal, user-comfortable interaction with the skin for long-term wearable, high-fidelity recording of swallowing electromyograms on the chin. Mechanics modeling and experimental quantification captures the ultra-elastic mechanical characteristics of an open mesh microstructured sensor, conjugated with an elastomeric membrane. Systematic in vivo studies investigate the functionality of the soft electronics for HCI-enabled swallowing training, which includes the application of a biofeedback system to detect swallowing behavior. The collection of results demonstrates clinical feasibility of the ergonomic electronics in HCI-driven rehabilitation for patients with swallowing disorders.

Ergonomic study and static analysis for new design of electric scooter

NASA Astrophysics Data System (ADS)

Fadzly, M. K.; Munirah, Anis; Shayfull, Z.; Saad, Mohd Sazli

2017-09-01

The purposes of this project are to design and diversify the function of a battery powered scooter frame which is more practical for the human factor in ergonomic and optimum design. The new design is based on ideas which are studied from existing scooter frame, United States Patent design and European States International Patent design. The final idea of concept design for scooter frame is based on concept chosen from the best characteristics and it is divided into three main difference ideas and the matrix evaluation method is applied. Analysis that applies to frame design, arm, rim and drive train component is based on Cosmos Express program. As a conclusion, the design that is produce are able to carry the maximum also has more practical features in ergonomic view.

A study of ergonomics factors in washbasin design.

PubMed

Aksoy, O; Ertürk, Z; Oztürk, K; Saltik, H; Ward, J S

1977-06-01

A 4-week UNESCO-sponsored mission to the Department of Architecture, Karadeniz Technical University in Eastern Turkey, gave an opportunity to apply ergonomics techniques to some aspects of that country's domestic washbasin design. The study was intended to provide experience in questionnaire design and administration, in the application of psycho-physical methods, and to highlight the importance of determining user characteristics and preferences with regard to the built environment. A field study elicited information on dimensions and positioning of existing wash-basins and ancillary equipment and the opinions of users as to the suitability of these features in relation to the activities performed. A laboratory study, using an adjustable rig permitting variation in the heights of basin, taps and mirror/shelf, followed. The data obtained on preferred heights of these items led to the conclusions that basin height should be increased to between 95 and 100 cm to satisfy the majority of users; tap height above the basin should be reduced to about 11 cm; the shelf and lower edge of a mirror sited above the basin should be 136 cm above the floor; and a clear space of 110 cm should be available between the front of the basin and a wall or other obstruction. Suggestions on other design aspects of the bathroom, resulting from the study, are discussed.

Evaluation of the effect of a laparoscopic robotized needle holder on ergonomics and skills.

PubMed

Bensignor, Thierry; Morel, Guillaume; Reversat, David; Fuks, David; Gayet, Brice

2016-02-01

Laparoscopy generates technical and ergonomics difficulties due to limited degrees of freedom (DOF) of forceps. To reduce this limitation, a new 5-mm robotized needle holder with two intracorporeal DOF, Jaimy(®), has been developed. The aim of this study was to evaluate its effects on ergonomics and skills. Fourteen surgeons including eight senior and six residents were crossover randomized and stratified based on experience. Three suturing tasks were performed with both Jaimy(®) and a classic needle holder (NH): task 1: Peg-Board; task 2: hexagonal suture; task 3: frontal suture. Postural ergonomics of the dominant arm were evaluated with an ergonomics score (RULA score) thanks to motion capture, and muscular ergonomics with electromyography of six muscular groups (flexor and extensor carpis, biceps, triceps, deltoid, trapeze). Performance outcomes are a quantitative and qualitative score, and skills outcomes are the measurement of the number of movements and the path length travelled by the instrument. The RULA score showed a statistically improved posture with Jaimy(®) (p < 0.001). The cumulative muscular workload (CMW) of four muscles was not different. However, the CMW was in favor of the NH for the flexor carpi ulnaris (p < 0.001) and the triceps (p = 0.027). The number of movements was not different (p = 0.39) although the path length was shorter with Jaimy(®) (p = 0.012). The score for task 1 was in favor of the NH (p = 0.006) with a higher quantity score. Task 2 score was not different (p = 0.086): The quality part of the score was in favor of Jaimy(®) (p = 0.009) and the quantity part was higher with the NH (p = 0.04). The score for task 3 was higher with Jaimy(®) (p = 0.001). This study suggests that the use of a robotized needle holder improves both posture and the quality of laparoscopic sutures.

The effect of ergonomic laparoscopic tool handle design on performance and efficiency.

PubMed

Tung, Kryztopher D; Shorti, Rami M; Downey, Earl C; Bloswick, Donald S; Merryweather, Andrew S

2015-09-01

Many factors can affect a surgeon's performance in the operating room; these may include surgeon comfort, ergonomics of tool handle design, and fatigue. A laparoscopic tool handle designed with ergonomic considerations (pistol grip) was tested against a current market tool with a traditional pinch grip handle. The goal of this study is to quantify the impact ergonomic design considerations which have on surgeon performance. We hypothesized that there will be measurable differences between the efficiency while performing FLS surgical trainer tasks when using both tool handle designs in three categories: time to completion, technical skill, and subjective user ratings. The pistol grip incorporates an ergonomic interface intended to reduce contact stress points on the hand and fingers, promote a more neutral operating wrist posture, and reduce hand tremor and fatigue. The traditional pinch grip is a laparoscopic tool developed by Stryker Inc. widely used during minimal invasive surgery. Twenty-three (13 M, 10 F) participants with no existing upper extremity musculoskeletal disorders or experience performing laparoscopic procedures were selected to perform in this study. During a training session prior to testing, participants performed practice trials in a SAGES FLS trainer with both tools. During data collection, participants performed three evaluation tasks using both handle designs (order was randomized, and each trial completed three times). The tasks consisted of FLS peg transfer, cutting, and suturing tasks. Feedback from test participants indicated that they significantly preferred the ergonomic pistol grip in every category (p < 0.05); most notably, participants experienced greater degrees of discomfort in their hands after using the pinch grip tool. Furthermore, participants completed cutting and peg transfer tasks in a shorter time duration (p < 0.05) with the pistol grip than with the pinch grip design; there was no significant difference between completion

Insights into ergonomics among dental professionals of a dental institute and private practitioners in hubli-dharwad twin cities, India.

PubMed

Kalghatgi, Shrivardhan; Prasad, Kakarla Veera Venkata; Chhabra, Kumar Gaurav; Deolia, Shravani; Chhabra, Chaya

2014-12-01

To assess the knowledge, attitude, and practice of ergonomics among dental professionals of Hubli-Dharwad twin cities, India. Investigator-developed, self-administered, closed-ended questionnaire assessing knowledge, attitude, and practices regarding ergonomics during dental practice was filled in by undergraduates, house surgeons, postgraduates, and faculty members of dental institutions and private practitioners from Hubli-Dharwad twin cities. Data were collected from a total of 250 participants, 50 belonging to each academic group. Overall mean knowledge, attitude, and practice scores were 52%, 75%, and 55%, respectively. Significant correlation was found for age with attitude (χ(2) = 10.734, p = 0.030) and behavior (χ(2) = 12.984, p = 0.011). Marital status was significantly associated with all the three domains; knowledge (χ(2) = 29.369, p = 0.000), attitude (χ(2) = 29.023, p = 0.000), and practices (χ(2) = 13.648, p = 0.009). Participants had considerable awareness and behavior toward ergonomics in dental practice. The high attitude score indicates stronger acceptance of ergonomics principles and guidelines during routine dental procedures. The current study highlights the situation of ergonomics in dental practice in the form of knowledge, attitude, and practices.

An Evaluation of Student Perceptions of Screen Presentations in Computer-based Laboratory Simulations.

ERIC Educational Resources Information Center

Edward, Norrie S.

1997-01-01

Evaluates the importance of realism in the screen presentation of the plant in computer-based laboratory simulations for part-time engineering students. Concludes that simulations are less effective than actual laboratories but that realism minimizes the disadvantages. The schematic approach was preferred for ease of use. (AIM)

A framework for performing workplace hazard and risk analysis: a participative ergonomics approach.

PubMed

Morag, Ido; Luria, Gil

2013-01-01

Despite the unanimity among researchers about the centrality of workplace analysis based on participatory ergonomics (PE) as a basis for preventive interventions, there is still little agreement about the necessary of a theoretical framework for providing practical guidance. In an effort to develop a conceptual PE framework, the authors, focusing on 20 studies, found five primary dimensions for characterising an analytical structure: (1) extent of workforce involvement; (2) analysis duration; (3) diversity of reporter role types; (4) scope of analysis and (5) supportive information system for analysis management. An ergonomics analysis carried out in a chemical manufacturing plant serves as a case study for evaluating the proposed framework. The study simultaneously demonstrates the five dimensions and evaluates their feasibility. The study showed that managerial leadership was fundamental to the successful implementation of the analysis; that all job holders should participate in analysing their own workplace and simplified reporting methods contributed to a desirable outcome. This paper seeks to clarify the scope of workplace ergonomics analysis by offering a theoretical and structured framework for providing practical advice and guidance. Essential to successfully implementing the analytical framework are managerial involvement, participation of all job holders and simplified reporting methods.