Sample records for laboratory procedures manual

  1. Microbial ecology laboratory procedures manual NASA/MSFC

    NASA Technical Reports Server (NTRS)

    Huff, Timothy L.

    1990-01-01

    An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.

  2. Laboratory procedures manual for the firefly luciferase assay for adenosine triphosphate (ATP)

    NASA Technical Reports Server (NTRS)

    Chappelle, E. W.; Picciolo, G. L.; Curtis, C. A.; Knust, E. A.; Nibley, D. A.; Vance, R. B.

    1975-01-01

    A manual on the procedures and instruments developed for the adenosine triphosphate (ATP) luciferase assay is presented. Data cover, laboratory maintenance, maintenance of bacterial cultures, bacteria measurement, reagents, luciferase procedures, and determination of microbal susceptibility to antibiotics.

  3. Regulations and Procedures Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Young, Lydia

    The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertainingmore » to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.« less

  4. Regulations and Procedures Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Young, Lydia J.

    The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnelmore » policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.« less

  5. MICROBIAL LABORATORY GUIDANCE MANUAL FOR THE ...

    EPA Pesticide Factsheets

    The Long-Term 2 Enhanced Surface Water Treatment Rule Laboratory Instruction Manual will be a compilation of all information needed by laboratories and field personnel to collect, analyze, and report the microbiological data required under the rule. The manual will provide laboratories with a single source of information that currently is available from various sources including the latest versions of Methods 1622 and 1623, including all approved, equivalent modifications; the procedures for E.coli methods approved for use under the LT2ESWTR; lists of vendor sources; data recording forms; data reporting requirements; information on the Laboratory Quality Assurance Evaluation Program for the Analysis of Cryptosporidium in Water; and sample collection procedures. Although most of this information is available elsewhere, a single, comprehensive compendium containing this information is needed to aid utilities and laboratories performing the sampling and analysis activities required under the LT2 rule. This manual will serve as an instruction manual for laboratories to use when collecting data for Crypto, E. coli and turbidity.

  6. The procedures manual of the Environmental Measurements Laboratory. Volume 1, 28. edition

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chieco, N.A.

    1997-02-01

    This manual covers procedures and technology currently in use at the Environmental Measurements Laboratory. An attempt is made to be sure that all work carried out will be of the highest quality. Attention is focused on the following areas: quality assurance; sampling; radiation measurements; analytical chemistry; radionuclide data; special facilities; and specifications.

  7. Chemistry laboratory safety manual available

    NASA Technical Reports Server (NTRS)

    Elsbrock, R. G.

    1968-01-01

    Chemistry laboratory safety manual outlines safe practices for handling hazardous chemicals and chemistry laboratory equipment. Included are discussions of chemical hazards relating to fire, health, explosion, safety equipment and procedures for certain laboratory techniques and manipulations involving glassware, vacuum equipment, acids, bases, and volatile solvents.

  8. Creep Laboratory manual

    NASA Astrophysics Data System (ADS)

    Osgerby, S.; Loveday, M. S.

    1992-06-01

    A manual for the NPL Creep Laboratory, a collective name given to two testing laboratories, the Uniaxial Creep Laboratory and the Advanced High Temperature Mechanical Testing Laboratory, is presented. The first laboratory is devoted to uniaxial creep testing and houses approximately 50 high sensitivity creep machines including 10 constant stress cam lever machines. The second laboratory houses a low cycle fatigue testing machine of 100 kN capacity driven by a servo-electric actuator, five machines for uniaxial tensile creep testing of engineering ceramics at temperatures up to 1600C, and an electronic creep machine. Details of the operational procedures for carrying out uniaxial creep testing are given. Calibration procedures to be followed in order to comply with the specifications laid down by British standards, and to provide traceability back to the primary standards are described.

  9. Procedures For Microbial-Ecology Laboratory

    NASA Technical Reports Server (NTRS)

    Huff, Timothy L.

    1993-01-01

    Microbial Ecology Laboratory Procedures Manual provides concise and well-defined instructions on routine technical procedures to be followed in microbiological laboratory to ensure safety, analytical control, and validity of results.

  10. XML syntax for clinical laboratory procedure manuals.

    PubMed

    Saadawi, Gilan; Harrison, James H

    2003-01-01

    We have developed a document type description (DTD) in Extensable Markup Language (XML) for clinical laboratory procedures. Our XML syntax can adequately structure a variety of procedure types across different laboratories and is compatible with current procedure standards. The combination of this format with an XML content management system and appropriate style sheets will allow efficient procedure maintenance, distributed access, customized display and effective searching across a large body of test information.

  11. Medical Service Clinical Laboratory Procedures--Bacteriology.

    ERIC Educational Resources Information Center

    Department of the Army, Washington, DC.

    This manual presents laboratory procedures for the differentiation and identification of disease agents from clinical materials. Included are procedures for the collection of specimens, preparation of culture media, pure culture methods, cultivation of the microorganisms in natural and simulated natural environments, and procedures in…

  12. Water Quality & Pollutant Source Monitoring: Field and Laboratory Procedures. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This training manual presents material on techniques and instrumentation used to develop data in field monitoring programs and related laboratory operations concerned with water quality and pollution monitoring. Topics include: collection and handling of samples; bacteriological, biological, and chemical field and laboratory methods; field…

  13. Effluent-Monitoring Procedures: Basic Laboratory Skills. Student Reference Manual.

    ERIC Educational Resources Information Center

    Engel, William T.; And Others

    This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. This Student Reference Manual provides a review of basic mathematics as it applies to the chemical laboratory. The…

  14. 78 FR 22536 - Procedural Manual for the Election Assistance Commission's Voting System Test Laboratories...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-16

    ... System Test Laboratories Program Manual, Version 2.0 AGENCY: United States Election Assistance Commission (EAC). ACTION: Notice; publication of Voting System Test Laboratories Program Manual, Version 2.0, for 60 day public comment period on EAC Web site. SUMMARY: The U.S. Election Assistance Commission (EAC...

  15. Manual of analytical methods for the Environmental Health Laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gray, C. E.

    1975-06-01

    This manual was compiled from techniques used In the Environmental Health Laboratory of Sandia Laboratories at Albuquerque. New Mexico, and is a revision of an earlier publication (SC-M-07-3044) edited by Lial W. Brewer. The procedures arc similar to those used in other laboratories devoted to Environmental Health practices. Some of the methods are standard and others are modified to suit our needs; others were developed at Sandia. The author has attempted to present all methods in a simple and concise manner, but in sufficient detail to make them readily usable. It is not inferred that the methods are universal formore » any type of sample, but they have been found very reliable for the types of samples mentioned. The author will welcome inquiry for clarification of any part of this manual. It is the desire of the author that this manual will be of use and service to others. New and revised procedures will be issued as supplements to this document.« less

  16. Effluent Monitoring Procedures: Nutrients. Student Reference Manual.

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Washington, DC. Office of Water Programs.

    This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…

  17. Consumer-Oriented Laboratory Activities: A Manual for Secondary Science Students.

    ERIC Educational Resources Information Center

    Anderson, Jacqueline; McDuffie, Thomas E., Jr.

    This document provides a laboratory manual for use by secondary level students in performing consumer-oriented laboratory experiments. Each experiment includes an introductory question outlining the purpose of the investigation, a detailed discussion, detailed procedures, questions to be answered upon completing the experiment, and information for…

  18. Intranets: virtual procedure manuals for the pathology lab.

    PubMed

    Ruby, S G; Krempel, G

    1998-08-01

    A novel system exists for replacing standard written operation manuals using a computerized PC-based peer-to-peer network. The system design is based on commonly available hardware and software and utilizes existing equipment to minimize implementation expense. The system is relatively easy to implement and maintain, involves minimal training, and should quickly become a financial asset. In addition, such a system can improve access to laboratory procedure manuals so that resources can be better used on a daily basis.

  19. H. W. Laboratory manual: 100 Area section

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1950-07-01

    The purpose of this manual is to present a Hazard Breakdown of all jobs normally encountered in the laboratory work of the three sections comprising the Analytic Section, Metallurgy and Control Division of the Technical Department. A Hazard Breakdown is a careful analysis of any job in which the source of possible dangers is clearly indicated for each particular step. The analysis is prepared by individuals who are thoroughly familiar with the specific job or procedure. It is felt that if the hazards herein outlined are recognized by the Laboratory personnel and the suggested safety cautions followed, the chance formore » injury will be minimized and the worker will become generally more safety conscious. The manual, which is prefaced by the general safety rules applying to all the laboratories, is divided into three main sections, one for each of the three sections into which the Laboratories Division is divided. These sections are as follows: Section 1 -- 200 Area Control; Section 2 -- 100 Area Control; Section 3 -- 300 Area Control, Essential Materials, and Methods Improvement.« less

  20. Effluent Monitoring Procedures: Metals Analyses. Student Reference Manual.

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Washington, DC. Office of Water Programs.

    This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…

  1. Tennessee environmental procedures manual

    DOT National Transportation Integrated Search

    2007-04-16

    The Tennessee Environmental Procedures Manual (TEPM or manual) provides guidance for the preparation of environmental analysis and documentation for federally funded and state-funded transportation projects. /Abstract from report, p. I-1/

  2. Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-03-01

    This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

  3. Procedures of Exercise Physiology Laboratories

    NASA Technical Reports Server (NTRS)

    Bishop, Phillip A.; Fortney, Suzanne; Greenisen, Michael; Siconolfi, Steven F.; Bamman, Marcas M.; Moore, Alan D., Jr.; Squires, William

    1998-01-01

    This manual describes the laboratory methods used to collect flight crew physiological performance data at the Johnson Space Center. The Exercise Countermeasures Project Laboratory is a standard physiology laboratory; only the application to the study of human physiological adaptations to spaceflight is unique. In the absence of any other recently published laboratory manual, this manual should be a useful document staffs and students of other laboratories.

  4. Laboratory Animal Care Training Manual for Instructors and Students.

    ERIC Educational Resources Information Center

    California Univ., San Francisco. Animal Care Facility.

    This manual presents item-by-item, step-by-step procedures for the student being trained as a technician in laboratory animal care. Statements are preceeded by a box for the student to check when he has read each statement. The first 16 lessons cover: orientation; identifying, handling, and determining the sex of rodents and rabbits, cats and…

  5. Enucleation Procedure Manual.

    ERIC Educational Resources Information Center

    Davis, Kevin; Poston, George

    This manual provides information on the enucleation procedure (removal of the eyes for organ banks). An introductory section focuses on the anatomy of the eye and defines each of the parts. Diagrams of the eye are provided. A list of enucleation materials follows. Other sections present outlines of (1) a sterile procedure; (2) preparation for eye…

  6. How to Write Effective Procedure Manuals.

    ERIC Educational Resources Information Center

    Wold, Geoffrey H.

    1987-01-01

    Describes six key guidelines for developing usable procedure manuals, including defining the audience; designing a standard format; preparing an outline; using a clear, concise writing style; testing the procedures; and "finalizing" the product with indices, glossaries, appendices, and section tabs. Well-written manuals can increase…

  7. The computational structural mechanics testbed procedures manual

    NASA Technical Reports Server (NTRS)

    Stewart, Caroline B. (Compiler)

    1991-01-01

    The purpose of this manual is to document the standard high level command language procedures of the Computational Structural Mechanics (CSM) Testbed software system. A description of each procedure including its function, commands, data interface, and use is presented. This manual is designed to assist users in defining and using command procedures to perform structural analysis in the CSM Testbed User's Manual and the CSM Testbed Data Library Description.

  8. State of laboratory manual instruction in California community college introductory (non-majors) biology laboratory instruction

    NASA Astrophysics Data System (ADS)

    Priest, Michelle

    College students must complete a life science course prior to graduation for a bachelor's degree. Generally, the course has lecture and laboratory components. It is in the laboratory where there are exceptional opportunities for exploration, challenge and application of the material learned. Optimally, this would utilize the best of inquiry based approaches. Most community colleges are using a home-grown or self written laboratory manual for the direction of work in the laboratory period. Little was known about the motivation, development and adaptation of use. It was also not known about the future of the laboratory manuals in light of the recent learning reform in California Community Colleges, Student Learning Outcomes. Extensive interviews were conducted with laboratory manual authors to determine the motivation, process of development, who was involved and learning framework used in the creation of the manuals. It was further asked of manual authors their ideas about the future of the manual, the development of staff and faculty and finally, the role Student Learning Outcomes would play in the manual. Science faculty currently teaching the non-majors biology laboratories for at least two semesters were surveyed on-line about actual practice of the manual, assessment, manual flexibility, faculty training and incorporation of Student Learning Outcomes. Finally, an evaluation of the laboratory manual was done using an established Laboratory Task Analysis Instrument. Laboratory manuals were evaluated on a variety of categories to determine the level of inquiry instruction done by students in the laboratory section. The results were that the development of homegrown laboratory manuals was done by community colleges in the Los Angeles and Orange Counties in an effort to minimize the cost of the manual to the students, to utilize all the exercises in a particular lab and to effectively utilize the materials already owned by the department. Further, schools wanted to

  9. Biology Laboratory Safety Manual.

    ERIC Educational Resources Information Center

    Case, Christine L.

    The Centers for Disease Control (CDC) recommends that schools prepare or adapt a biosafety manual, and that instructors develop a list of safety procedures applicable to their own lab and distribute it to each student. In this way, safety issues will be brought to each student's attention. This document is an example of such a manual. It contains…

  10. SRC-I demonstration plant analytical laboratory methods manual. Final technical report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.

    1983-03-01

    This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

  11. A Laboratory Manual for Stepwise Cerebral White Matter Fiber Dissection.

    PubMed

    Koutsarnakis, Christos; Liakos, Faidon; Kalyvas, Aristotelis V; Sakas, Damianos E; Stranjalis, George

    2015-08-01

    White matter fiber dissection is an important method in acquiring a thorough neuroanatomic knowledge for surgical practice. Previous studies have definitely improved our understanding of intrinsic brain anatomy and emphasized on the significance of this technique in modern neurosurgery. However, current literature lacks a complete and concentrated laboratory guide about the entire dissection procedure. Hence, our primary objective is to introduce a detailed laboratory manual for cerebral white matter dissection by highlighting consecutive dissection steps, and to stress important technical comments facilitating this complex procedure. Twenty adult, formalin-fixed cerebral hemispheres were included in the study. Ten specimens were dissected in the lateromedial and 10 in the mediolateral direction, respectively, using the fiber dissection technique and the microscope. Eleven and 8 consecutive and distinctive dissection steps are recommended for the lateromedial and mediolateral dissection procedures, respectively. Photographs highlighting various anatomic landmarks accompany every step. Technical recommendations, facilitating the dissection process, are also indicated. The fiber dissection technique, although complex and time consuming, offers a three-dimensional knowledge of intrinsic brain anatomy and architecture, thus improving both the quality of microneurosurgery and the patient's standard of care. The present anatomic study provides a thorough dissection manual to those who study brain anatomy using this technique. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Self-Monitoring Procedures: Basic Parameters for Municipal Effluents. Student Reference Manual.

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Washington, DC. Office of Water Programs.

    This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…

  13. Identifying and Dealing with Hazardous Materials and Procedures in the General Chemistry Laboratory.

    ERIC Educational Resources Information Center

    Katz, David A.

    1982-01-01

    A survey of freshman chemistry laboratory manuals identified 15 questionable laboratory procedures, including the use of potentially hazardous chemicals. Alternatives are suggested for each hazard discussed (such as using a substitute solvent for benzene). (SK)

  14. Manual Laboratorio de Microbiologia. Documento de trabajo Programa de Educacion en Ocupaciones de Salud (Microbiology Laboratory Manual. Curriculum Document. Program of Education in Health Occupations).

    ERIC Educational Resources Information Center

    Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

    This laboratory manual on microbiology begins with an introduction relating the study of microorganisms to health occupations education and stressing the importance of teaching critical thinking. The introduction is followed by general instructions for the use of the manual and an illustration of hand washing procedures. The 13 laboratory…

  15. Kinesiology Workbook and Laboratory Manual.

    ERIC Educational Resources Information Center

    Harris, Ruth W.

    This manual is written for students in anatomy, kinesiology, or introductory biomechanics courses. The book is divided into two sections, a kinesiology workbook and a laboratory manual. The two sections parallel each other in content and format. Each is divided into three corresponding sections: (1) Anatomical bases for movement description; (2)…

  16. Analysis of on-line clinical laboratory manuals and practical recommendations.

    PubMed

    Beckwith, Bruce; Schwartz, Robert; Pantanowitz, Liron

    2004-04-01

    On-line clinical laboratory manuals are a valuable resource for medical professionals. To our knowledge, no recommendations currently exist for their content or design. To analyze publicly accessible on-line clinical laboratory manuals and to propose guidelines for their content. We conducted an Internet search for clinical laboratory manuals written in English with individual test listings. Four individual test listings in each manual were evaluated for 16 data elements, including sample requirements, test methodology, units of measure, reference range, and critical values. Web sites were also evaluated for supplementary information and search functions. We identified 48 on-line laboratory manuals, including 24 academic or community hospital laboratories and 24 commercial or reference laboratories. All manuals had search engines and/or test indices. No single manual contained all 16 data elements evaluated. An average of 8.9 (56%) elements were present (range, 4-14). Basic sample requirements (specimen and volume needed) were the elements most commonly present (98% of manuals). The frequency of the remaining data elements varied from 10% to 90%. On-line clinical laboratory manuals originate from both hospital and commercial laboratories. While most manuals were user-friendly and contained adequate specimen-collection information, other important elements, such as reference ranges, were frequently absent. To ensure that clinical laboratory manuals are of maximal utility, we propose the following 13 data elements be included in individual test listings: test name, synonyms, test description, test methodology, sample requirements, volume requirements, collection guidelines, transport guidelines, units of measure, reference range, critical values, test availability, and date of latest revision.

  17. Laboratory Manual, Electrical Engineering 25.

    ERIC Educational Resources Information Center

    Syracuse Univ., NY. Dept. of Electrical Engineering.

    Developed as part of a series of materials in the electrical engineering sequence developed under contract with the United States Office of Education, this laboratory manual provides nine laboratory projects suitable for a second course in electrical engineering. Dealing with resonant circuits, electrostatic fields, magnetic devices, and…

  18. Aquatic Microbiology Laboratory Manual.

    ERIC Educational Resources Information Center

    Cooper, Robert C.; And Others

    This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…

  19. Laboratory Waste Disposal Manual. Revised Edition.

    ERIC Educational Resources Information Center

    Stephenson, F. G., Ed.

    This manual is designed to provide laboratory personnel with information about chemical hazards and ways of disposing of chemical wastes with minimum contamination of the environment. The manual contains a reference chart section which has alphabetical listings of some 1200 chemical substances with information on the health, fire and reactivity…

  20. Motor Development: Manual of Alternative Procedures.

    ERIC Educational Resources Information Center

    McCormack, James E.

    The manual of alternative procedures for teaching handicapped children focuses on programming, planning, and implementing training in the gross motor (posture, limb control, locomotion) and fine motor (facial, digital) skills. The manual consists of the following sections: specific teaching tactics commonly used in motor training stiuations…

  1. Water Chemistry Laboratory Manual.

    ERIC Educational Resources Information Center

    Jenkins, David; And Others

    This manual of laboratory experiments in water chemistry serves a dual function of illustrating fundamental chemical principles of dilute aqueous systems and of providing the student with some familiarity with the chemical measurements commonly used in water and wastewater analysis. Experiments are grouped in categories on the basis of similar…

  2. 46 CFR 130.480 - Test procedure and operations manual.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Test procedure and operations manual. 130.480 Section... VESSEL CONTROL, AND MISCELLANEOUS EQUIPMENT AND SYSTEMS Automation of Unattended Machinery Spaces § 130.480 Test procedure and operations manual. (a) A procedure for tests to be conducted on automated...

  3. Construction inspection manual of procedures

    DOT National Transportation Integrated Search

    2009-01-01

    This manual provides highway construction personnel with relevant, practical information in order to perform accurate inspections and provide relevant construction procedural information for the various roadway and structures items of work. It is the...

  4. Practices & Procedures of Mason Tending I & II. Instructor Manual. Trainee Manual.

    ERIC Educational Resources Information Center

    Laborers-AGC Education and Training Fund, Pomfret Center, CT.

    This packet consists of the instructor and trainee manuals for two courses: practices and procedures of mason tending I and II. The instructor manual for mason tending I contains a schedule for a 40-hour, 5-day course and instructor outline. The outline provides a step-by-step description of the instructor's activities and includes answer sheets…

  5. MetaMapping the nursing procedure manual.

    PubMed

    Peace, Jane; Brennan, Patricia Flatley

    2006-01-01

    Nursing procedure manuals are an important resource for practice, but ensuring that the correct procedure can be located when needed is an ongoing challenge. This poster presents an approach used to automatically index nursing procedures with standardized nursing terminology. Although indexing yielded a low number of mappings, examination of successfully mapped terms, incorrect mappings, and unmapped terms reveals important information about the reasons automated indexing fails.

  6. Surface Environmental Surveillance Procedures Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  7. Multi-Agency Radiological Laboratory Analytical Protocols Manual (MARLAP)

    EPA Pesticide Factsheets

    The Multi-Agency Radiological Laboratory Analytical Protocols Manual (MARLAP) provides guidance for the planning, implementation and assessment phases of projects that require laboratory analysis of radionuclides.

  8. An exploratory investigation of the translation of Pacific Northwest Laboratory`s print manuals system to an on-line manuals system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Heubach, J.G.; Hunt, S.T.; Pond, L.R.

    1992-06-01

    Information management technology has proliferated in the past decade in response to the information explosion. As documentation accumulates, the need to access information residing in manuals, handbooks and regulations conveniently, accurately, and quickly has increased. However, studies show that only fractions of the available information is read (Martin, 1978). Consequently, one of the biggest challenges in linking information and electronic management of information is to use the power of communication technology to meet the information needs of the audience. Pacific Northwest Laboratories` (PNL) investigation of translating its print manual system to an on-line system fits this challenge precisely. PNL`s manualsmore » contain a tremendous amount of information for which manual holders are responsible. To perform their tasks in compliance with policy and procedure guidelines, users need to access information accurately, conveniently, and quickly. In order to select and use information management tools wisely, answers must be sought to a few basic questions. Communication experts cite four key questions: What do users want? What do users need? What characteristics of an on-line information system affect its usefulness? Who are the users whose wants and needs are to be met? Once these questions are answered, attention can be focused on finding the best match between user requirements and technology characteristics and weighing the costs and benefits of proposed options.« less

  9. The procedures manual of the Environmental Measurements Laboratory. Volume 2, 28. edition

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chieco, N.A.

    1997-02-01

    This report contains environmental sampling and analytical chemistry procedures that are performed by the Environmental Measurements Laboratory. The purpose of environmental sampling and analysis is to obtain data that describe a particular site at a specific point in time from which an evaluation can be made as a basis for possible action.

  10. Pollution Microbiology, A Laboratory Manual.

    ERIC Educational Resources Information Center

    Finstein, Melvin S.

    This manual is designed for use in the laboratory phase of courses dealing with microbial aspects of pollution. It attempts to cover the subject area broadly in four major categories: (1) microorganisms in clean and polluted waters, (2) carbonaceous pollutants, (3) nitrogen, phosphorus, iron, and sulfur as pollutants, and (4) sanitary…

  11. Stationary Engineering Laboratory Manual--2.

    ERIC Educational Resources Information Center

    Steingress, Frederick M.; Frost, Harold J.

    The Stationary Engineering Laboratory Manual 2 was designed for vocational/technical high school students who have received instruction in the basics of stationary engineering. It was developed for students who will be operating a live plant and who will be responsible for supplying steam for heating, cooking, and baking. Each lesson in the manual…

  12. Value Engineering. Technical Manual. School Facilities Development Procedures Manual.

    ERIC Educational Resources Information Center

    Washington Office of the State Superintendent of Public Instruction, Olympia.

    Value Engineering (VE) is a cost-optimizing technique used to analyze design quality and cost-effectiveness. The application of VE procedures to the design and construction of school facilities has been adopted by the state of Washington. This technical manual provides guidance in developing the scope and applicability of VE to school projects; in…

  13. Manual of Basic Techniques for a Health Laboratory.

    ERIC Educational Resources Information Center

    World Health Organization, Geneva (Switzerland).

    Described are basic laboratory methods for diagnosing and investigating diseases of importance to developing countries. Intended primarily for the training of technicians who will work in peripheral laboratories, the manual is designed so that student laboratory assistants can be taught to use it with minimal supervision from a teacher. The…

  14. NASA Lewis Propulsion Systems Laboratory Customer Guide Manual

    NASA Technical Reports Server (NTRS)

    Soeder, Ronald H.

    1994-01-01

    This manual describes the Propulsion Systems Laboratory (PSL) at NASA Lewis Research Center. The PSL complex supports two large engine test cells (PSL-3 and PSL-4) that are capable of providing flight simulation to altitudes of 70,000 ft. Facility variables at the engine or test-article inlet, such as pressure, temperature, and Mach number (up to 3.0 for PSL-3 and up to 6.0 planned for PSL-4), are discussed. Support systems such as the heated and cooled combustion air systems; the altitude exhaust system; the hydraulic system; the nitrogen, oxygen, and hydrogen systems; hydrogen burners; rotating screen assemblies; the engine exhaust gas-sampling system; the infrared imaging system; and single- and multiple-axis thrust stands are addressed. Facility safety procedures are also stated.

  15. Understanding and Using the New Guided-Inquiry AP Chemistry Laboratory Manual

    ERIC Educational Resources Information Center

    Cacciatore, Kristen L.

    2014-01-01

    To support teaching and learning in the advanced placement (AP) chemistry laboratory, the College Board published a laboratory manual, "AP Chemistry Guided-Inquiry Experiments: Applying the Science Practices," in 2013 as part of the redesigned course. This article provides a discussion of the rationale for the existence of the manual as…

  16. Child Guidance for Child Caregivers: Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    Designed to enhance student knowledge of and skills in child guidance in group care settings, this manual provides 50 laboratory experiences for five units. Units cover foundations and assumptions (2 laboratory experiences), developmental factors (8), indirect guidance (14), direct guidance (14), and strategies (12). Each unit includes performance…

  17. Definition of an XML markup language for clinical laboratory procedures and comparison with generic XML markup.

    PubMed

    Saadawi, Gilan M; Harrison, James H

    2006-10-01

    Clinical laboratory procedure manuals are typically maintained as word processor files and are inefficient to store and search, require substantial effort for review and updating, and integrate poorly with other laboratory information. Electronic document management systems could improve procedure management and utility. As a first step toward building such systems, we have developed a prototype electronic format for laboratory procedures using Extensible Markup Language (XML). Representative laboratory procedures were analyzed to identify document structure and data elements. This information was used to create a markup vocabulary, CLP-ML, expressed as an XML Document Type Definition (DTD). To determine whether this markup provided advantages over generic markup, we compared procedures structured with CLP-ML or with the vocabulary of the Health Level Seven, Inc. (HL7) Clinical Document Architecture (CDA) narrative block. CLP-ML includes 124 XML tags and supports a variety of procedure types across different laboratory sections. When compared with a general-purpose markup vocabulary (CDA narrative block), CLP-ML documents were easier to edit and read, less complex structurally, and simpler to traverse for searching and retrieval. In combination with appropriate software, CLP-ML is designed to support electronic authoring, reviewing, distributing, and searching of clinical laboratory procedures from a central repository, decreasing procedure maintenance effort and increasing the utility of procedure information. A standard electronic procedure format could also allow laboratories and vendors to share procedures and procedure layouts, minimizing duplicative word processor editing. Our results suggest that laboratory-specific markup such as CLP-ML will provide greater benefit for such systems than generic markup.

  18. Characterizing the Experimental Procedure in Science Laboratories: A preliminary step towards students experimental design

    NASA Astrophysics Data System (ADS)

    Girault, Isabelle; d'Ham, Cedric; Ney, Muriel; Sanchez, Eric; Wajeman, Claire

    2012-04-01

    Many studies have stressed students' lack of understanding of experiments in laboratories. Some researchers suggest that if students design all or parts of entire experiment, as part of an inquiry-based approach, it would overcome certain difficulties. It requires that a procedure be written for experimental design. The aim of this paper is to describe the characteristics of a procedure in science laboratories, in an educational context. As a starting point, this paper proposes a model in the form of a hierarchical task diagram that gives the general structure of any procedure. This model allows both the analysis of existing procedures and the design of a new inquiry-based approach. The obtained characteristics are further organized into criteria that can help both teachers and students assess a procedure during and after its writing. These results are obtained through two different sets of data. First, the characteristics of procedures are established by analysing laboratory manuals. This allows the organization and type of information in procedures to be defined. This analysis reveals that students are seldom asked to write a full procedure, but sometimes have to specify tasks within a procedure. Secondly, iterative interviews are undertaken with teachers. This leads to the list of criteria to evaluate the procedure.

  19. THE MAN MADE WORLD, LABORATORY MANUAL.

    ERIC Educational Resources Information Center

    Commission on Engineering Education, Washington, DC.

    THIS LABORATORY MANUAL, THE COMPANION VOLUME TO THE STUDENT'S TEXT FOR THE "MAN MADE WORLD" HIGH SCHOOL COURSE, CONTAINS 31 EXPERIMENTS DEALING WITH THE THEORY, CIRCUITRY, AND OPERATION OF COMPUTERS, AND RELATED TECHNOLOGY. THE COURSE WAS WRITTEN BY SCIENTISTS, ENGINEERS, AND EDUCATORS, AND IS INTENDED AS A PART OF THE CULTURAL CURRICULUM FOR ALL…

  20. Environmental Engineering Unit Operations and Unit Processes Laboratory Manual.

    ERIC Educational Resources Information Center

    O'Connor, John T., Ed.

    This manual was prepared for the purpose of stimulating the development of effective unit operations and unit processes laboratory courses in environmental engineering. Laboratory activities emphasizing physical operations, biological, and chemical processes are designed for various educational and equipment levels. An introductory section reviews…

  1. IERL-RTP PROCEDURES MANUAL: LEVEL 1 ENVIRONMENTAL ASSESSMENT BIOLOGICAL TESTS

    EPA Science Inventory

    The manual gives revised procedures for Level 1 environmental assessment biological tests, and supersedes the first edition, EPA-600/7-77-043 (NTIS No. PB 268484), published in April 1977. The revised biological procedures complement the Level 1 chemical and physical procedures p...

  2. Training Procedure Manual for the Mentally Retarded.

    ERIC Educational Resources Information Center

    Dustin, Josephine; And Others

    Presented is a training procedure manual for institutionalized moderately, severely, and profoundly retarded persons. Teaching activities are suggested for the following skill areas: motor development and awareness (including sensory stimulation, mat skills, and music and basic rhythm); toileting; eating skills (such as straw sipping and table…

  3. Image 100 procedures manual development: Applications system library definition and Image 100 software definition

    NASA Technical Reports Server (NTRS)

    Guseman, L. F., Jr.; Decell, H. P., Jr.

    1975-01-01

    An outline for an Image 100 procedures manual for Earth Resources Program image analysis was developed which sets forth guidelines that provide a basis for the preparation and updating of an Image 100 Procedures Manual. The scope of the outline was limited to definition of general features of a procedures manual together with special features of an interactive system. Computer programs were identified which should be implemented as part of an applications oriented library for the system.

  4. A Procedure Manual for the Health Assistant Curriculum: Final Report.

    ERIC Educational Resources Information Center

    Pennsylvania State Univ., University Park.

    A secondary education health assistant curriculum procedure manual for six occupational areas is presented. The six areas, the number of procedures described for each area, and an example procedure follow: nursing assistant, forty-six (assist patient to and from a wheelchair); home health assistant, six (baby holds); medical/dental offices…

  5. A Content Analysis of General Chemistry Laboratory Manuals for Evidence of Higher-Order Cognitive Tasks

    NASA Astrophysics Data System (ADS)

    Domin, Daniel S.

    1999-01-01

    The science laboratory instructional environment is ideal for fostering the development of problem-solving, manipulative, and higher-order thinking skills: the skills needed by today's learner to compete in an ever increasing technology-based society. This paper reports the results of a content analysis of ten general chemistry laboratory manuals. Three experiments from each manual were examined for evidence of higher-order cognitive activities. Analysis was based upon the six major cognitive categories of Bloom's Taxonomy of Educational Objectives: knowledge, comprehension, application, analysis, synthesis, and evaluation. The results of this study show that the overwhelming majority of general chemistry laboratory manuals provide tasks that require the use of only the lower-order cognitive skills: knowledge, comprehension, and application. Two of the laboratory manuals were disparate in having activities that utilized higher-order cognition. I describe the instructional strategies used within these manuals to foster higher-order cognitive development.

  6. A Manual for a Laboratory Information Management System (LIMS) For Light Stable Isotopes - Version 7.0

    DTIC Science & Technology

    1998-01-01

    A MANUAL FOR A LABORATORY INFORMATION MANAGEMENT SYSTEM (LIMS) FOR LIGHT STABLE ISOTOPES— VERSION 7.0 U.S. GEOLOGICAL SURVEY Open-File Report 98-284...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 A MANUAL FOR A LABORATORY INFORMATION MANAGEMENT SYSTEM (LIMS) FOR LIGHT STABLE...Europa Scientific ..................................................120 1 A MANUAL FOR A LABORATORY INFORMATION MANAGEMENT SYSTEM (LIMS) FOR LIGHT STABLE

  7. Flexible pavement overlay design procedures. Volume 2: User manual

    NASA Astrophysics Data System (ADS)

    Majidzadeh, K.; Ilves, G. J.

    1981-08-01

    This user manual outlines a procedure for the design of asphaltic concrete overlays on existing asphaltic concrete pavement surfaces. It is intended as a guide to the user on the type and form of information required as input to the procedure and contains all elements necessary for the user to prepare designs for flexible pavement overlays.

  8. Starch gel electrophoresis of conifer seeds: a laboratory manual

    Treesearch

    M. Thompson Conkle; Paul D. Hodgskiss; Lucy B. Nunnally; Serena C. Hunter

    1982-01-01

    This manual describes fast, low-cost biochemical procedures for separating enzymes representing numerous genes of forest trees. During electrophoresis the mixture of enzymes from a megagametophyte or embryo of a germinated seed separates in a gel. Specific stains applied to gel slices locate each enzyme. These procedures expand on those developed for crops research....

  9. The Case for Laboratory Developed Procedures

    PubMed Central

    Sabatini, Linda M.; Tsongalis, Gregory J.; Caliendo, Angela M.; Olsen, Randall J.; Ashwood, Edward R.; Bale, Sherri; Benirschke, Robert; Carlow, Dean; Funke, Birgit H.; Grody, Wayne W.; Hayden, Randall T.; Hegde, Madhuri; Lyon, Elaine; Pessin, Melissa; Press, Richard D.; Thomson, Richard B.

    2017-01-01

    An explosion of knowledge and technology is revolutionizing medicine and patient care. Novel testing must be brought to the clinic with safety and accuracy, but also in a timely and cost-effective manner, so that patients can benefit and laboratories can offer testing consistent with current guidelines. Under the oversight provided by the Clinical Laboratory Improvement Amendments, laboratories have been able to develop and optimize laboratory procedures for use in-house. Quality improvement programs, interlaboratory comparisons, and the ability of laboratories to adjust assays as needed to improve results, utilize new sample types, or incorporate new mutations, information, or technologies are positive aspects of Clinical Laboratory Improvement Amendments oversight of laboratory-developed procedures. Laboratories have a long history of successful service to patients operating under Clinical Laboratory Improvement Amendments. A series of detailed clinical examples illustrating the quality and positive impact of laboratory-developed procedures on patient care is provided. These examples also demonstrate how Clinical Laboratory Improvement Amendments oversight ensures accurate, reliable, and reproducible testing in clinical laboratories. PMID:28815200

  10. An exploratory investigation of the translation of Pacific Northwest Laboratory's print manuals system to an on-line manuals system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Heubach, J.G.; Hunt, S.T.; Pond, L.R.

    1992-06-01

    Information management technology has proliferated in the past decade in response to the information explosion. As documentation accumulates, the need to access information residing in manuals, handbooks and regulations conveniently, accurately, and quickly has increased. However, studies show that only fractions of the available information is read (Martin, 1978). Consequently, one of the biggest challenges in linking information and electronic management of information is to use the power of communication technology to meet the information needs of the audience. Pacific Northwest Laboratories' (PNL) investigation of translating its print manual system to an on-line system fits this challenge precisely. PNL's manualsmore » contain a tremendous amount of information for which manual holders are responsible. To perform their tasks in compliance with policy and procedure guidelines, users need to access information accurately, conveniently, and quickly. In order to select and use information management tools wisely, answers must be sought to a few basic questions. Communication experts cite four key questions: What do users want What do users need What characteristics of an on-line information system affect its usefulness Who are the users whose wants and needs are to be met Once these questions are answered, attention can be focused on finding the best match between user requirements and technology characteristics and weighing the costs and benefits of proposed options.« less

  11. Fleet logistics system : data administration plans and procedures manual

    DOT National Transportation Integrated Search

    1996-01-23

    This manual provides data administration (DA) procedures for developers and maintainers of Coast Guard fleet logistics information systems. Fleet logistics includes a community of supply, logistics, maintenance, and shipboard functions. The informati...

  12. Development and evaluation of an interactive electronic laboratory manual for cooperative learning of medical histology.

    PubMed

    Khalil, Mohammed K; Kirkley, Debbie L; Kibble, Jonathan D

    2013-01-01

    This article describes the development of an interactive computer-based laboratory manual, created to facilitate the teaching and learning of medical histology. The overarching goal of developing the manual is to facilitate self-directed group interactivities that actively engage students during laboratory sessions. The design of the manual includes guided instruction for students to navigate virtual slides, exercises for students to monitor learning, and cases to provide clinical relevance. At the end of the laboratory activities, student groups can generate a laboratory report that may be used to provide formative feedback. The instructional value of the manual was evaluated by a questionnaire containing both closed-ended and open-ended items. Closed-ended items using a five-point Likert-scale assessed the format and navigation, instructional contents, group process, and learning process. Open-ended items assessed student's perception on the effectiveness of the manual in facilitating their learning. After implementation for two consecutive years, student evaluation of the manual was highly positive and indicated that it facilitated their learning by reinforcing and clarifying classroom sessions, improved their understanding, facilitated active and cooperative learning, and supported self-monitoring of their learning. Copyright © 2013 American Association of Anatomists.

  13. Bio-Oil Analysis Laboratory Procedures | Bioenergy | NREL

    Science.gov Websites

    Bio-Oil Analysis Laboratory Procedures Bio-Oil Analysis Laboratory Procedures NREL develops standard procedures have been validated and allow for reliable bio-oil analysis. Procedures Determination different hydroxyl groups (-OH) in pyrolysis bio-oil: aliphatic-OH, phenolic-OH, and carboxylic-OH. Download

  14. Battery Test Manual For Electric Vehicles, Revision 3

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Christophersen, Jon P.

    2015-06-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Electric Vehicles (EV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for EVs. However, it does share some methods described in the previously published battery test manual for plug-in hybrid electric vehicles. Due to the complexity of some of themore » procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Chul Bae of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less

  15. Development and Evaluation of an Interactive Electronic Laboratory Manual for Cooperative Learning of Medical Histology

    ERIC Educational Resources Information Center

    Khalil, Mohammed K.; Kirkley, Debbie L.; Kibble, Jonathan D.

    2013-01-01

    This article describes the development of an interactive computer-based laboratory manual, created to facilitate the teaching and learning of medical histology. The overarching goal of developing the manual is to facilitate self-directed group interactivities that actively engage students during laboratory sessions. The design of the manual…

  16. Conversion of school nurse policy and procedure manual to electronic format.

    PubMed

    Randall, Joellyn; Knee, Rachel; Galemore, Cynthia

    2006-10-01

    Policy and procedure manuals are essential to establishing standards of practice and ensuring quality of care to students and families. The Olathe District Schools (Kansas) Technology Department created the Virtual File Cabinet to provide online access to employee policies, school board policies, forms, and other documents. A task force of school nurses was formed to convert the nursing department's policies, procedures, protocols, and forms from hard copy to electronic format and make them available on the district's Virtual File Cabinet. Having the policy and procedure manuals in electronic format allows for quick access and ease in updating information, thereby guaranteeing the school nurses have access to the most current information. Cost savings were realized by reducing the amount of paper and staff time needed to copy, collate, and assemble materials.

  17. 76 FR 68328 - Commercial Driver's License Information System State Procedures Manual, Release 5.2.0

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-04

    ... mandating CDLIS and discusses types of CDLIS users. This Manual also includes descriptions, excerpted from... Manual, Release 5.2.0 AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Final...) Commercial Driver's License Information System (CDLIS) State Procedures Manual (the Manual) (Release 5.2.0...

  18. Laboratory Manual (For Concrete Instruction Course); Instructor's Guide, Pilot Program Edition.

    ERIC Educational Resources Information Center

    Portland Cement Association, Cleveland, OH.

    This laboratory manual, prepared for a 2-year program in junior colleges and technical institutes, is designed to accompany the instructional materials to train persons for employment as technicians in the cement and concrete industries. Included are 16 laboratory assignments for each of the following: (1) Principles of Concrete, (2) Concrete in…

  19. Medical Laboratory Services. Student's Manual. Cluster Core for Health Occupations Education.

    ERIC Educational Resources Information Center

    Williams, Catherine

    This student's manual on medical laboratory services is one of a series of self-contained, individualized materials for students enrolled in training within the allied health field. It includes competencies that are associated with the performance of skills common to several occupations in the medical laboratory. The material is intended for use…

  20. A Manual of Simplified Laboratory Methods for Operators of Wastewater Treatment Facilities.

    ERIC Educational Resources Information Center

    Westerhold, Arnold F., Ed.; Bennett, Ernest C., Ed.

    This manual is designed to provide the small wastewater treatment plant operator, as well as the new or inexperienced operator, with simplified methods for laboratory analysis of water and wastewater. It is emphasized that this manual is not a replacement for standard methods but a guide for plants with insufficient equipment to perform analyses…

  1. A Laboratory Approach to Economic Education: A Manual for High School Teachers.

    ERIC Educational Resources Information Center

    Prehn, Edward C., Ed.; Dawson, George G., Ed.

    This manual is intended to help high school teachers use a laboratory field trip approach to economic education. The information in the manual is based on experiences which were part of the Akron, Ohio, Public School pilot program in economics that combined classroom instruction with in-depth exposure to community resources. Part 1 of the manual…

  2. Library Collections Development and Maintenance Policies and Procedures Manual.

    ERIC Educational Resources Information Center

    Tubesing, Richard

    This manual for the College of the Southwest (New Mexico) library delineates collection development policies and procedures for library and teaching faculty. The first section deals with collection development and maintenance responsibilities: knowledge of the collection; knowledge of college and course needs; library materials budget allocations;…

  3. Linking Project Procedure Manual for Using Dumb-Barcode Linking on GEAC.

    ERIC Educational Resources Information Center

    Condron, Lyn

    This procedure manual is designed to assist cataloging staff members at a university library through the 10-step process of barcoding and linking books classified by the Library of Congress system to the library's GEAC online computer system. A brief introduction provides background information on the project. The procedures involved in each…

  4. Simulating Laboratory Procedures.

    ERIC Educational Resources Information Center

    Baker, J. E.; And Others

    1986-01-01

    Describes the use of computer assisted instruction in a medical microbiology course. Presents examples of how computer assisted instruction can present case histories in which the laboratory procedures are simulated. Discusses an authoring system used to prepare computer simulations and provides one example of a case history dealing with fractured…

  5. 75 FR 3756 - The National Environmental Policy Act Procedures Manual

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-22

    ... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission The National Environmental Policy Act Procedures Manual AGENCY: National Indian Gaming Commission. ACTION: Notice of reopening of comment period... Gaming Commission, 1441 L Street, NW., Suite 9100, Washington, DC 20005; (2) by hand delivery to...

  6. 75 FR 13139 - The National Environmental Policy Act Procedures Manual

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... NATIONAL INDIAN GAMING COMMISSION The National Environmental Policy Act Procedures Manual AGENCY: The National Indian Gaming Commission. ACTION: Notice of reopening of comment period. SUMMARY: This... Indian Gaming Commission, 1441 L Street, NW., Suite 9100, Washington, DC 20005; (2) by hand delivery to...

  7. Developing a Procedures Manual for Using the Innovacq 100 System Effectively and Efficiently.

    ERIC Educational Resources Information Center

    Cubberley, Carol

    The installation of an automated acquisitions system, the Innovacq 100, demanded a review and revision of procedures in the Acquisitions Department of the University of Central Florida Library. This practicum report describes the process involved in developing the new procedures. Prior to installation, the old departmental procedures manual and…

  8. Load research manual. Volume 1. Load research procedures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussedmore » in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.« less

  9. 42 CFR 493.1355 - Condition: Laboratories performing PPM procedures; laboratory director.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Laboratories performing PPM procedures; laboratory director. 493.1355 Section 493.1355 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS...

  10. 42 CFR 493.1355 - Condition: Laboratories performing PPM procedures; laboratory director.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Condition: Laboratories performing PPM procedures; laboratory director. 493.1355 Section 493.1355 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS...

  11. A gender analysis of secondary school physics textbooks and laboratory manuals

    NASA Astrophysics Data System (ADS)

    Kostas, Nancy Ann

    Secondary school physics textbooks and laboratory manuals were evaluated for gender balance. The textbooks and manuals evaluated were all current editions available at the time of the study with copyrights of 1988 to 1992. Illustrations, drawings and photographs were judged gender balanced based on the number of men and women, boys and girls shown in both active and passive roles. Illustrations, drawings and photographs were also evaluated by the number of male and female scientists identified by name. The curricular content of the textbooks was analyzed for gender balance by three criteria: the number of named male and female scientists whose accomplishments were described in the text; the number of careers assigned to men and women; and the number of verbal analogies assigned to girls interests, boys interests or neutral interests. The laboratory activities in the manuals were categorized as demonstrations, experiments and observations. Three of each of these types of activities from each manual were analyzed for skills and motivating factors important to girls as identified by Potter and Rosser (1992). Data were analyzed by use of descriptive statistics of frequencies, means and chi-square goodness of fit. The.05 level of significance was applied to all analyses based upon an expected frequency of 50 - 50 percentage of men and women and a 4.5 percent for women scientists to 95.5 percent for men scientists. The findings were as follows. None of the textbooks had a balance of men/women, boys/girls in the illustrations, drawings and photographs. The Hewitt (Scott-Foresman, 1989) textbook was the only textbook with no significant difference. Using the expected frequency for male and female scientists, two textbooks were gender balanced for illustrations, drawings and photographs while all textbooks were gender balanced for described accomplishments of scientists. The Hewitt (Scott Foresman, 1989) textbook had the only gender balanced representation of careers

  12. Special Education Services: A Manual of Policies, Procedures and Guidelines

    ERIC Educational Resources Information Center

    British Columbia Ministry of Education, 2013

    2013-01-01

    This resource conveys policies, procedures, and guidelines that support the delivery of special education services in British Columbia's (Canada) public schools. It was originally published in 1995 (ED414703), following an extensive provincial Special Education Review (1993-94). The purpose of this manual is to provide a single point of reference…

  13. Guide for Developing and Evaluating an SFAR 36 Engineering Procedures Manual

    DOT National Transportation Integrated Search

    1997-05-22

    This advisory circular (AC) sets forth an acceptable means, but not the only : means, for developing and evaluating a 14 Code of Federal Regulations (14CFR) : Special Federal Aviaton Regulation (SFAR)36 engineering procedures manual. As : such, the t...

  14. Developing Flowcharted Procedures Manuals for School District Administration within the ISO 9000 Context.

    ERIC Educational Resources Information Center

    Schoch, Robert

    2002-01-01

    Describes how the School District of Lancaster, Pennsylvania, implemented a districtwide quality-management system based on the Geneva-based International Standards Organization 9001, a major component of which is the documentation of procedures. Includes sections on implementation, procedure manuals, quality management, uniformity, formatting,…

  15. 24 CFR 3280.3 - Manufactured home procedural and enforcement regulations and consumer manual requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Manufactured home procedural and enforcement regulations and consumer manual requirements. 3280.3 Section 3280.3 Housing and Urban Development... consumer manual requirements. A manufacturer must comply with the requirements of this part 3280, part 3282...

  16. 49 CFR 192.605 - Procedural manual for operations, maintenance, and emergencies.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... operations and maintenance activities are conducted. (b) Maintenance and normal operations. The manual... personnel to determine the effectiveness, and adequacy of the procedures used in normal operation and... or flow rate outside normal operating limits; (iii) Loss of communications; (iv) Operation of any...

  17. General Science, Ninth Grade: Theme III and Theme IV. Student Laboratory Manual. Experimental.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

    This document is the student laboratory manual that was designed to accompany some of the experimental activities found in the teacher's guide to this general science course for ninth graders. It contains laboratory worksheets for lessons on such topics as: (1) soil; (2) hazardous waste; (3) wildlife refuges; (4) the water cycle; (5) water…

  18. Emergencies and Problems: A Procedures Manual for Trinity University Library.

    ERIC Educational Resources Information Center

    Pettit, Katherine D.

    The first of six sections in this manual outlines a series of steps to be followed when an emergency or problem occurs. These procedures are divided into four categories: (1) behavioral emergencies, i.e., bomb threats, building takeover, problem patrons, or thefts; (2) building emergencies, i.e., elevator failure, fire, flooding of building/water…

  19. Sandia National Laboratories, California Environmental Management System program manual.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Larsen, Barbara L.

    2012-03-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 436.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a setmore » of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site first received ISO 14001 certification in September 2006 and recertification in 2009. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy and Water Resource Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has

  20. 49 CFR 192.605 - Procedural manual for operations, maintenance, and emergencies.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... maintenance activities and for emergency response. For transmission lines, the manual must also include... and effective manner. (5) Starting up and shutting down any part of the pipeline in a manner designed... control room management procedures required by § 192.631. (c) Abnormal operation. For transmission lines...

  1. Flagging threshold optimization for manual blood smear review in primary care laboratory.

    PubMed

    Bihl, Pierre-Adrien

    2018-04-01

    Manual blood smear review is required when an anomaly detected by the automated hematologic analyzer triggers a flag. Our will through this study is to optimize these flagging thresholds for manual slide review in order to limit workload, while insuring clinical care through no extra false-negative. Flagging causes of 4,373 samples were investigated by manual slide review, after having been run on ADVIA 2120i. A set of 6 user-adjustments is proposed. By implementing all recommendations that we made, false-positive rate falls from 81.8% to 58.6%, while PPV increases from 18.2% to 23.7%. Hence, use of such optimized thresholds enables us to maximize efficiency without altering clinical care, but each laboratory should establish its own criteria to take into consideration local distinctive features.

  2. Conversion of School Nurse Policy and Procedure Manual to Electronic Format

    ERIC Educational Resources Information Center

    Randall, Joellyn; Knee, Rachel; Galemore, Cynthia

    2006-01-01

    Policy and procedure manuals are essential to establishing standards of practice and ensuring quality of care to students and families. The Olathe District Schools (Kansas) Technology Department created the Virtual File Cabinet to provide online access to employee policies, school board policies, forms, and other documents. A task force of school…

  3. CSPD Technical Manual: Procedures for Comprehensive Assessment of Educational Personnel Supply/Demand. 1990 Edition.

    ERIC Educational Resources Information Center

    Lauritzen, Paul; Friedman, Stephen

    This manual presents procedures for collecting data to project personnel needs in the field of special education, addressing in part the Comprehensive System of Personnel Development requirements of Public Law 94-142. Implementation of the procedures identifies: areas of education that show need for additional teachers as well as areas of surplus;…

  4. Evaluation of Revised Manual Compaction Rammers and Laboratory Compaction Procedures.

    DTIC Science & Technology

    1983-09-01

    in soil preparation procedure.* The soils being tested in this investigation were classified as MH and were known to contain halloysite clay mineral...soils containing halloysite on the results of compaction tests (Frost 1967, Brand and Hongsnoi 1969). It has also been shown that air-drying and then

  5. 77 FR 41172 - Trademark Board Manual of Procedure, Third Edition, Revision 1

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-12

    ... DEPARTMENT OF COMMERCE Patent and Trademark Office [Docket No. PTO-T-2012-0028] Trademark Board Manual of Procedure, Third Edition, Revision 1 AGENCY: United States Patent and Trademark Office... not have the force and effect of law. Its guidelines have been developed as a matter of internal...

  6. Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 1. Biosafety Level 4 Suit Laboratory Suite Entry and Exit Procedures

    PubMed Central

    Janosko, Krisztina; Holbrook, Michael R.; Adams, Ricky; Barr, Jason; Bollinger, Laura; Newton, Je T'aime; Ntiforo, Corrie; Coe, Linda; Wada, Jiro; Pusl, Daniela; Jahrling, Peter B.; Kuhn, Jens H.; Lackemeyer, Matthew G.

    2016-01-01

    Biosafety level 4 (BSL-4) suit laboratories are specifically designed to study high-consequence pathogens for which neither infection prophylaxes nor treatment options exist. The hallmarks of these laboratories are: custom-designed airtight doors, dedicated supply and exhaust airflow systems, a negative-pressure environment, and mandatory use of positive-pressure (“space”) suits. The risk for laboratory specialists working with highly pathogenic agents is minimized through rigorous training and adherence to stringent safety protocols and standard operating procedures. Researchers perform the majority of their work in BSL-2 laboratories and switch to BSL-4 suit laboratories when work with a high-consequence pathogen is required. Collaborators and scientists considering BSL-4 projects should be aware of the challenges associated with BSL-4 research both in terms of experimental technical limitations in BSL-4 laboratory space and the increased duration of such experiments. Tasks such as entering and exiting the BSL-4 suit laboratories are considerably more complex and time-consuming compared to BSL-2 and BSL-3 laboratories. The focus of this particular article is to address basic biosafety concerns and describe the entrance and exit procedures for the BSL-4 laboratory at the NIH/NIAID Integrated Research Facility at Fort Detrick. Such procedures include checking external systems that support the BSL-4 laboratory, and inspecting and donning positive-pressure suits, entering the laboratory, moving through air pressure-resistant doors, and connecting to air-supply hoses. We will also discuss moving within and exiting the BSL-4 suit laboratories, including using the chemical shower and removing and storing positive-pressure suits. PMID:27768063

  7. Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 1. Biosafety Level 4 Suit Laboratory Suite Entry and Exit Procedures.

    PubMed

    Janosko, Krisztina; Holbrook, Michael R; Adams, Ricky; Barr, Jason; Bollinger, Laura; Newton, Je T'aime; Ntiforo, Corrie; Coe, Linda; Wada, Jiro; Pusl, Daniela; Jahrling, Peter B; Kuhn, Jens H; Lackemeyer, Matthew G

    2016-10-03

    Biosafety level 4 (BSL-4) suit laboratories are specifically designed to study high-consequence pathogens for which neither infection prophylaxes nor treatment options exist. The hallmarks of these laboratories are: custom-designed airtight doors, dedicated supply and exhaust airflow systems, a negative-pressure environment, and mandatory use of positive-pressure ("space") suits. The risk for laboratory specialists working with highly pathogenic agents is minimized through rigorous training and adherence to stringent safety protocols and standard operating procedures. Researchers perform the majority of their work in BSL-2 laboratories and switch to BSL-4 suit laboratories when work with a high-consequence pathogen is required. Collaborators and scientists considering BSL-4 projects should be aware of the challenges associated with BSL-4 research both in terms of experimental technical limitations in BSL-4 laboratory space and the increased duration of such experiments. Tasks such as entering and exiting the BSL-4 suit laboratories are considerably more complex and time-consuming compared to BSL-2 and BSL-3 laboratories. The focus of this particular article is to address basic biosafety concerns and describe the entrance and exit procedures for the BSL-4 laboratory at the NIH/NIAID Integrated Research Facility at Fort Detrick. Such procedures include checking external systems that support the BSL-4 laboratory, and inspecting and donning positive-pressure suits, entering the laboratory, moving through air pressure-resistant doors, and connecting to air-supply hoses. We will also discuss moving within and exiting the BSL-4 suit laboratories, including using the chemical shower and removing and storing positive-pressure suits.

  8. Placement Assistance Services: Procedures Manual. S.P.A.C.E. Student Placement and Counseling Effort.

    ERIC Educational Resources Information Center

    Irvin, Donald E.; Galey, Stephen B.

    This manual represents an attempt to develop a model and procedures for implementing career planning and placement assistance services in Minnesota high schools. The procedures described were developed for and tested in four participating high schools of different sizes, administrative structures, and geographic locations. Divided into seven…

  9. Medical Office Laboratory Procedures: Course Proposal. Revised.

    ERIC Educational Resources Information Center

    Baker, Eleanor

    A proposal is presented for a Community College of Philadelphia course, entitled "Medical Office Laboratory Procedures," which provides a laboratory introduction to microscopic and chemical analysis of blood and urine as performed in the physician's office. Following a standard cover form, a statement of the purpose of the course discusses course…

  10. Fluorometric procedures for dye tracing

    USGS Publications Warehouse

    Wilson, James F.; Cobb, Ernest D.; Kilpatrick, F.A.

    1986-01-01

    This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

  11. Fluorometric procedures for dye tracing

    USGS Publications Warehouse

    Wilson, James F.

    1968-01-01

    This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

  12. Teaching Manual Signs to Adults with Mental Retardation Using Matching-to-Sample Procedures and Stimulus Equivalence

    ERIC Educational Resources Information Center

    Elias, N. C.; Goyos, C.; Saunders, M.; Saunders, R.

    2008-01-01

    The objective of this study was to teach manual signs through an automated matching-to-sample procedure and to test for the emergence of new conditional relations and imitative behaviors. Seven adults with mild to severe mental retardation participated. Four were also hearing impaired. Relations between manual signs (set A) and pictures (set B)…

  13. Manual wheeled mobility--current and future developments from the human engineering research laboratories.

    PubMed

    Cooper, Rory A; Koontz, Alicia M; Ding, Dan; Kelleher, Annmarie; Rice, Ian; Cooper, Rosemarie

    2010-01-01

    Medical rehabilitation and assistive technology are immersed in a world transitioning to a basis in evidence-based practice. Fortunately, there is a growing body of knowledge related to manual wheelchair mobility to form a basis for clinical decision making. The results from research studies are useful for designing better wheelchairs, fitting and training people appropriately, contributing to evidence-based-medicine and guiding future research. This review describes some of the work related to manual wheelchairs that has and is being conducted within the University of Pittsburgh and the Human Engineering Research Laboratories of the United States Department of Veterans Affairs, and its application.

  14. U.S. Department of Energy Vehicle Technologies Program: Battery Test Manual For Plug-In Hybrid Electric Vehicles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Christophersen, Jon P.

    2014-09-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of somemore » of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Renata M. Arsenault of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less

  15. Manual versus automated γ-H2AX foci analysis across five European laboratories: can this assay be used for rapid biodosimetry in a large scale radiation accident?

    PubMed

    Rothkamm, Kai; Barnard, Stephen; Ainsbury, Elizabeth A; Al-Hafidh, Jenna; Barquinero, Joan-Francesc; Lindholm, Carita; Moquet, Jayne; Perälä, Marjo; Roch-Lefèvre, Sandrine; Scherthan, Harry; Thierens, Hubert; Vral, Anne; Vandersickel, Veerle

    2013-08-30

    The identification of severely exposed individuals and reassurance of the 'worried well' are of prime importance for initial triage following a large scale radiation accident. We aim to develop the γ-H2AX foci assay into a rapid biomarker tool for use in accidents. Here, five laboratories established a standard operating procedure and analysed 100 ex vivo γ-irradiated, 4 or 24h incubated and overnight-shipped lymphocyte samples from four donors to generate γ-H2AX reference data, using manual and/or automated foci scoring strategies. In addition to acute, homogeneous exposures to 0, 1, 2 and 4Gy, acute simulated partial body (4Gy to 50% of cells) and protracted exposures (4Gy over 24h) were analysed. Data from all laboratories could be satisfactorily fitted with linear dose response functions. Average yields observed at 4h post exposure were 2-4 times higher than at 24h and varied considerably between laboratories. Automated scoring caused larger uncertainties than manual scoring and was unable to identify partial exposures, which were detectable in manually scored samples due to their overdispersed foci distributions. Protracted exposures were detectable but doses could not be accurately estimated with the γ-H2AX assay. We conclude that the γ-H2AX assay may be useful for rapid triage following a recent acute radiation exposure. The potentially higher speed and convenience of automated relative to manual foci scoring needs to be balanced against its compromised accuracy and inability to detect partial body exposures. Regular re-calibration or inclusion of reference samples may be necessary to ensure consistent results between laboratories or over long time periods. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

  16. Electric Utility Rate Design Study: reference manual and procedures for implementing PURPA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    State regulatory commissions will be assisted by using this manual in carrying out their responsibilities under the National Energy Act, specifically under the Public Utilities Regulatory Policies Act (PURPA). The research and materials of the Rate Design Study are basically applicable to Title I of PURPA, and the Manual covers only that part of the Act. The Rate Design Study covers a wide scope of research and professional opinions and are a major reference source for data, information, and divergent views on practically every aspect of electric utility rate design. The introductory part calls attention to particularly important aspects ofmore » responsibilities, authority, and procedures. The second part outlines the specific responsibilities placed by Title I of PURPA on the State commissions. Part 3 discusses some of the procedural and substantive requirements and options of PURPA with particular emphasis on their relation to the Rate Design Study, State law, and State regulatory policies. Part 4 is an independent analysis that includes cross-indexed references to the more than 60 reports prepared by the Rate Design Study and also to other pertinent sources of information and data. Part 5 summarizes a survey conducted in January 1979 of State commission actions related to the matters contained in Title I of PURPA. Part 6 presents the text of the law. Part 7 is the request from NARUC that prompted the preparation of the Manual. (MCW)« less

  17. 14 CFR 21.441 - Procedure manual.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... manual. (a) No DAS may exercise any authority under this subpart unless it submits, and obtains approval... limitations or Aircraft Flight Manuals, and sign supplemental type certificates. (b) No DAS may continue to perform any DAS function affected by any change in facilities or staff necessary to continue to meet the...

  18. Fluorometric procedures for dye tracing

    USGS Publications Warehouse

    Wilson, James E.; Cobb, Ernest D.; Kilpatrick, Frederick A.

    1984-01-01

    This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The outstanding characteristics of dye tracing are: (1) the low detection and measurement limits, and (2) the simplicity and accuracy of measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a general guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section is included on aerial photography because of its possible use to supplement ground-level fluorometry.

  19. Book Review: Microbial fish disease manual by J. A. Plumb, and P. R. Bowser

    USGS Publications Warehouse

    Anderson, D.P.

    1985-01-01

    The authors are faculty members of aquaculture departments in major universities, and as such have compiled a manual for use in teaching laboratory diagnostic procedures for field and research pathologists.

  20. Aeropropulsion facilities configuration control: Procedures manual

    NASA Technical Reports Server (NTRS)

    Lavelle, James J.

    1990-01-01

    Lewis Research Center senior management directed that the aeropropulsion facilities be put under configuration control. A Configuration Management (CM) program was established by the Facilities Management Branch of the Aeropropulsion Facilities and Experiments Division. Under the CM program, a support service contractor was engaged to staff and implement the program. The Aeronautics Directorate has over 30 facilities at Lewis of various sizes and complexities. Under the program, a Facility Baseline List (FBL) was established for each facility, listing which systems and their documents were to be placed under configuration control. A Change Control System (CCS) was established requiring that any proposed changes to FBL systems or their documents were to be processed as per the CCS. Limited access control of the FBL master drawings was implemented and an audit system established to ensure all facility changes are properly processed. This procedures manual sets forth the policy and responsibilities to ensure all key documents constituting a facilities configuration are kept current, modified as needed, and verified to reflect any proposed change. This is the essence of the CM program.

  1. Load research manual. Volume 2. Fundamentals of implementing load research procedures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussedmore » in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.« less

  2. Interlibrary Loan, the Key to Resource Sharing: A Manual of Procedures and Protocols.

    ERIC Educational Resources Information Center

    Alaska State Dept. of Education, Juneau. Div. of State Libraries.

    Intended for use by librarians in Alaska, this manual provides general guidelines for the maximum utilization of library resources through interlibrary loan service. The first of four major sections describes the Alaska Library Network (ALN), which provides protocols and procedures to libraries for resource sharing; points out that new protocols…

  3. Breath-hold device for laboratory rodents undergoing imaging procedures.

    PubMed

    Rivera, Belinda; Bushman, Mark J; Beaver, Richard G; Cody, Dianna D; Price, Roger E

    2006-07-01

    The increased use in noninvasive imaging of laboratory rodents has prompted innovative techniques in animal handling. Lung imaging of rodents can be a difficult task because of tissue motion caused by breathing, which affects image quality. The use of a prototype flat-panel computed tomography unit allows the acquisition of images in as little as 2, 4, or 8 s. This short acquisition time has allowed us to improve the image quality of this instrument by performing a breath-hold during image acquisition. We designed an inexpensive and safe method for performing a constant-pressure breath-hold in intubated rodents. Initially a prototypic manual 3-way valve system, consisting of a 3-way valve, an air pressure regulator, and a manometer, was used to manually toggle between the ventilator and the constant-pressure breath-hold equipment. The success of the manual 3-way valve system prompted the design of an electronically actuated valve system. In the electronic system, the manual 3-way valve was replaced with a custom designed 3-way valve operated by an electrical solenoid. The electrical solenoid is triggered by using a hand-held push button or a foot pedal that is several feet away from the gantry of the scanner. This system has provided improved image quality and is safe for the animals, easy to use, and reliable.

  4. Manual of Procedures for Evaluation Visits under Standards for Accreditation, 1972. Revised 1977.

    ERIC Educational Resources Information Center

    American Library Association, Chicago, IL. Committee on Accreditation.

    This fully revised manual of procedures for evaluation visits presents guidelines for site visits to library schools seeking accreditation for their programs of study. Visits to such schools provide the Committee on Accreditation with data to assist in reaching a judgment whether to grant accredited status. The area of responsibility for the…

  5. Tribal Library Procedures Manual. TRAILS (Training and Assistance for Indian Library Services), September 10, 1985-January 10, 1987.

    ERIC Educational Resources Information Center

    Patterson, Lotsee

    This manual resulted from a 2-year project to improve, develop, and expand public library and information services to American Indians and Alaska Natives. Designed to serve as a guide for tribal and community librarians who may lack professional training, the manual offers descriptions of library services, procedures, and management issues. An…

  6. Load research manual. Volume 2: Fundamentals of implementing load research procedures

    NASA Astrophysics Data System (ADS)

    1980-11-01

    This manual will assist electric utilities and state regulatory authorities in investigating customer electricity demand as part of cost-of-service studies, rate design, marketing research, system design, load forecasting, rate reform analysis, and load management research. Load research procedures are described in detail. Research programs at three utilities are compared: Carolina Power and Light Company, Long Island Lighting Company, and Southern California Edison Company. A load research bibliography and glossaries of load research and statistical terms are also included.

  7. 47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

  8. 47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

  9. 47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The Federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

  10. 47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The Federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

  11. 47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

  12. Caltrans : construction manual

    DOT National Transportation Integrated Search

    2009-08-01

    Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

  13. Teaching Manual Signs to Adults With Mental Retardation Using Matching-to-Sample Procedures and Stimulus Equivalence

    PubMed Central

    Elias, Nassim Chamel; Goyos, Celso; Saunders, Muriel; Saunders, Richard

    2008-01-01

    The objective of this study was to teach manual signs through an automated matching-to-sample procedure and to test for the emergence of new conditional relations and imitative behaviors. Seven adults with mild to severe mental retardation participated. Four were also hearing impaired. Relations between manual signs (set A) and pictures (set B) were initially taught, followed by the training of corresponding printed words (set C) and pictures (set B). Further presentations of conditional discriminations tested for the emergence of AC, followed by tests for the emergence of imitative signing behavior (D) in the presence of either pictures (B) or printed words (C). Each stimulus set was comprised of 9 elements. The stimuli were still pictures, printed words, and dynamic presentations of manual signs. A pretest was conducted to determine which signs the participants could make pre-experimentally. Teaching was arranged in a multiple baseline design across 3 groups of 3 words each. The purpose of the present study was to determine whether participants would emit manual signs in expressive signs tests as a result of observation (video modeling) during match-to-sample training in the absence of explicit training. Five of the 7 subjects passed tests of emergence and emitted at least 50% of the signs. Two were hearing impaired with signing experience, and 3 were not hearing impaired and had no signing experience. Thus, observation of video recorded manual signs in a matching-to-sample training procedure was effective at establishing some signs by adults with mental retardation. PMID:22477400

  14. Laboratory productivity and the rate of manual peripheral blood smear review: a College of American Pathologists Q-Probes study of 95,141 complete blood count determinations performed in 263 institutions.

    PubMed

    Novis, David A; Walsh, Molly; Wilkinson, David; St Louis, Mary; Ben-Ezra, Jonathon

    2006-05-01

    Automated laboratory hematology analyzers are capable of performing differential counts on peripheral blood smears with greater precision and more accurate detection of distributional and morphologic abnormalities than those performed by manual examinations of blood smears. Manual determinations of blood morphology and leukocyte differential counts are time-consuming, expensive, and may not always be necessary. The frequency with which hematology laboratory workers perform manual screens despite the availability of labor-saving features of automated analyzers is unknown. To determine the normative rates with which manual peripheral blood smears were performed in clinical laboratories, to examine laboratory practices associated with higher or lower manual review rates, and to measure the effects of manual smear review on the efficiency of generating complete blood count (CBC) determinations. From each of 3 traditional shifts per day, participants were asked to select serially, 10 automated CBC specimens, and to indicate whether manual scans and/or reviews with complete differential counts were performed on blood smears prepared from those specimens. Sampling continued until a total of 60 peripheral smears were reviewed manually. For each specimen on which a manual review was performed, participants indicated the patient's age, hemoglobin value, white blood cell count, platelet count, and the primary reason why the manual review was performed. Participants also submitted data concerning their institutions' demographic profiles and their laboratories' staffing, work volume, and practices regarding CBC determinations. The rates of manual reviews and estimations of efficiency in performing CBC determinations were obtained from the data. A total of 263 hospitals and independent laboratories, predominantly located in the United States, participating in the College of American Pathologists Q-Probes Program. There were 95,141 CBC determinations examined in this study

  15. Information Resources; A Searcher's Manual. MOREL Regional Information System for Educators.

    ERIC Educational Resources Information Center

    Grimes, George; Doyle, James

    This document is one of a series describing the background, functions, and utilization of the Regional Information System (RIS) developed by the Michigan-Ohio Regional Educational Laboratory (MOREL). The purpose of this manual is to detail a procedure for performing a productive search of information resources which can satisfy the informational…

  16. Activities for Preschoolers--A Laboratory Manual for Use by Child-Care Teacher-Aide Students.

    ERIC Educational Resources Information Center

    Constantine, Jean

    This laboratory manual for use by child care and teacher aide students is arranged by topic according to the months and holidays of the school year. Suggested activities, songs, fingerplays, and poems are included for each topic, along with a list of related resource books. Many of the activities and songs include a number in parentheses following…

  17. TA-55 change control manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Blum, T.W.; Selvage, R.D.; Courtney, K.H.

    This manual is the guide for initiating change at the Plutonium Facility, which handles the processing of plutonium as well as research on plutonium metallurgy. It describes the change and work control processes employed at TA-55 to ensure that all proposed changes are properly identified, reviewed, approved, implemented, tested, and documented so that operations are maintained within the approved safety envelope. All Laboratory groups, their contractors, and subcontractors doing work at TA-55 follow requirements set forth herein. This manual applies to all new and modified processes and experiments inside the TA-55 Plutonium Facility; general plant project (GPP) and line itemmore » funded construction projects at TA-55; temporary and permanent changes that directly or indirectly affect structures, systems, or components (SSCs) as described in the safety analysis, including Facility Control System (FCS) software; and major modifications to procedures. This manual does not apply to maintenance performed on process equipment or facility SSCs or the replacement of SSCs or equipment with documented approved equivalents.« less

  18. The standardization of urine particle counting in medical laboratories--a Polish experience with the EQA programme.

    PubMed

    Cwiklińska, Agnieszka; Kąkol, Judyta; Kuchta, Agnieszka; Kortas-Stempak, Barbara; Pacanis, Anastasis; Rogulski, Jerzy; Wróblewska, Małgorzata

    2012-02-01

    Given the common problems with the standardization of urine particle counting methods and the great variability in the results obtained by Polish laboratories under international Labquality External Quality Assessment (EQA), we initiated educational recovery activities. Detailed instructions on how to perform the standardized examination were sent to EQA participants, as was a questionnaire forms which enabled information to be gathered in respect to the procedures being applied. Laboratory results were grouped according to the method declared on the EQA 'Result' form or according to a manual examination procedure established on the basis of the questionnaire. The between-laboratory CVs for leukocyte and erythrocyte counts were calculated for each group and compared using the Mann-Whitney test. Significantly lower between-laboratory CVs (p = 0.03) were achieved for leukocyte counting among the laboratories that analysed control specimens in accordance with standardized procedures as compared with those which used non-standardized procedures. We also observed a visible lower variability for erythrocyte counting. Unfortunately despite our activities, only a few of the Polish laboratories applied the standardized examination procedures, and only 29% of the results could have been considered to be standardized (16% - manual methods, 13% - automated systems). The standardization of urine particle counting methods continues to be a significant problem in medical laboratories and requires further recovery activities which can be conducted using the EQA scheme.

  19. Effluent Monitoring Procedures: Basic Laboratory Skills. Staff Guide for Conducting the Course.

    ERIC Educational Resources Information Center

    Engel, William T.; And Others

    This manual is designed for use by instructors who will have to teach others the basic laboratory skills needed to perform National Pollution Discharge Elimination System (NPDES) Analyses. It includes topics related to the presentation of training courses in which the NPDES analyses would be taught. These topics include: examples of course…

  20. Sandia National Laboratories environmental fluid dynamics code. Marine Hydrokinetic Module User's Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    James, Scott Carlton; Roberts, Jesse D.

    2014-03-01

    This document describes the marine hydrokinetic (MHK) input file and subroutines for the Sandia National Laboratories Environmental Fluid Dynamics Code (SNL-EFDC), which is a combined hydrodynamic, sediment transport, and water quality model based on the Environmental Fluid Dynamics Code (EFDC) developed by John Hamrick [1], formerly sponsored by the U.S. Environmental Protection Agency, and now maintained by Tetra Tech, Inc. SNL-EFDC has been previously enhanced with the incorporation of the SEDZLJ sediment dynamics model developed by Ziegler, Lick, and Jones [2-4]. SNL-EFDC has also been upgraded to more accurately simulate algae growth with specific application to optimizing biomass in anmore » open-channel raceway for biofuels production [5]. A detailed description of the input file containing data describing the MHK device/array is provided, along with a description of the MHK FORTRAN routine. Both a theoretical description of the MHK dynamics as incorporated into SNL-EFDC and an explanation of the source code are provided. This user manual is meant to be used in conjunction with the original EFDC [6] and sediment dynamics SNL-EFDC manuals [7]. Through this document, the authors provide information for users who wish to model the effects of an MHK device (or array of devices) on a flow system with EFDC and who also seek a clear understanding of the source code, which is available from staff in the Water Power Technologies Department at Sandia National Laboratories, Albuquerque, New Mexico.« less

  1. Field and laboratory procedures used in a soil chronosequence study

    USGS Publications Warehouse

    Singer, Michael J.; Janitzky, Peter

    1986-01-01

    In 1978, the late Denis Marchand initiated a research project entitled "Soil Correlation and Dating at the U.S. Geological Survey" to determine the usefulness of soils in solving geologic problems. Marchand proposed to establish soil chronosequences that could be dated independently of soil development by using radiometric and other numeric dating methods. In addition, by comparing dated chronosequences in different environments, rates of soil development could be studied and compared among varying climates and mineralogical conditions. The project was fundamental in documenting the value of soils in studies of mapping, correlating, and dating late Cenozoic deposits and in studying soil genesis. All published reports by members of the project are included in the bibliography.The project demanded that methods be adapted or developed to ensure comparability over a wide variation in soil types. Emphasis was placed on obtaining professional expertise and on establishing consistent techniques, especially for the field, laboratory, and data-compilation methods. Since 1978, twelve chronosequences have been sampled and analyzed by members of this project, and methods have been established and used consistently for analysis of the samples.The goals of this report are to:Document the methods used for the study on soil chronosequences,Present the results of tests that were run for precision, accuracy, and effectiveness, andDiscuss our modifications to standard procedures.Many of the methods presented herein are standard and have been reported elsewhere. However, we assume less prior analytical knowledge in our descriptions; thus, the manual should be easy to follow for the inexperienced analyst. Each chapter presents one or more references of the basic principle, an equipment and reagents list, and the detailed procedure. In some chapters this is followed by additional remarks or example calculations.The flow diagram in figure 1 outlines the step-by-step procedures used to

  2. A serological procedure for identifying strains of Germmeniella abietina.

    Treesearch

    Darroll D. Skilling; Mariann Kienzler

    1983-01-01

    This manual gives detailed laboratory serology procedures necessary to determine the identity of isolates of Gremmeniela abientina by the gel double diffusion method. The process is described from the arrival of the field sample to the reading of the precipitin bands on the diffusion plates.

  3. Exposure of Laboratory Workers to Francisella tularensis despite a Bioterrorism Procedure

    PubMed Central

    Shapiro, Daniel S.; Schwartz, Donald R.

    2002-01-01

    A rapidly fatal case of pulmonary tularemia in a 43-year-old man who was transferred to a tertiary care facility is presented. The microbiology laboratory and autopsy services were not notified of the clinical suspicion of tularemia by the service caring for the patient. Despite having a laboratory bioterrorism procedure in place and adhering to established laboratory protocol, 12 microbiology laboratory employees were exposed to Francisella tularensis and the identification of the organism was delayed due to lack of notification of the laboratory of the clinical suspicion of tularemia. A total of 11 microbiology employees and two persons involved in performing the patient's autopsy received prophylactic doxycycline due to concerns of transmission. None of them developed signs or symptoms of tularemia. One microbiology laboratory employee was pregnant and declined prophylactic antibiotics. As a result of this event, the microbiology laboratory has incorporated flow charts directly into the bench procedures for several highly infectious agents that may be agents of bioterrorism. This should permit more rapid recognition of an isolate for referral to a Level B laboratory for definitive identification and should improve laboratory safety. PMID:12037110

  4. Field Operations and Enforcement Manual for Air Pollution Control. Volume III: Inspection Procedures for Specific Industries.

    ERIC Educational Resources Information Center

    Weisburd, Melvin I.

    The Field Operations and Enforcement Manual for Air Pollution Control, Volume III, explains in detail the following: inspection procedures for specific sources, kraft pulp mills, animal rendering, steel mill furnaces, coking operations, petroleum refineries, chemical plants, non-ferrous smelting and refining, foundries, cement plants, aluminum…

  5. Laboratory Procedures in Thermal Expansion and Viscosity of Liquids

    ERIC Educational Resources Information Center

    Dawson, Paul Dow

    1974-01-01

    Describes the laboratory procedures for the measurement of thermal expansion and viscosity of liquids. These experiments require inexpensive equipment and are suitable for secondary school physical science classes. (JR)

  6. Validity of diagnoses, procedures, and laboratory data in Japanese administrative data.

    PubMed

    Yamana, Hayato; Moriwaki, Mutsuko; Horiguchi, Hiromasa; Kodan, Mariko; Fushimi, Kiyohide; Yasunaga, Hideo

    2017-10-01

    Validation of recorded data is a prerequisite for studies that utilize administrative databases. The present study evaluated the validity of diagnoses and procedure records in the Japanese Diagnosis Procedure Combination (DPC) data, along with laboratory test results in the newly-introduced Standardized Structured Medical Record Information Exchange (SS-MIX) data. Between November 2015 and February 2016, we conducted chart reviews of 315 patients hospitalized between April 2014 and March 2015 in four middle-sized acute-care hospitals in Shizuoka, Kochi, Fukuoka, and Saga Prefectures and used them as reference standards. The sensitivity and specificity of DPC data in identifying 16 diseases and 10 common procedures were identified. The accuracy of SS-MIX data for 13 laboratory test results was also examined. The specificity of diagnoses in the DPC data exceeded 96%, while the sensitivity was below 50% for seven diseases and variable across diseases. When limited to primary diagnoses, the sensitivity and specificity were 78.9% and 93.2%, respectively. The sensitivity of procedure records exceeded 90% for six procedures, and the specificity exceeded 90% for nine procedures. Agreement between the SS-MIX data and the chart reviews was above 95% for all 13 items. The validity of diagnoses and procedure records in the DPC data and laboratory results in the SS-MIX data was high in general, supporting their use in future studies. Copyright © 2017 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

  7. Procedures manual for the ORNL Radiological Survey Activities (RASA) Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Myrick, T.E.; Berven, B.A.; Cottrell, W.D.

    The portion of the radiological survey program performed by ORNL is the subject of this Procedures Manual. The RASA group of the Health and Safety Research Division (HASRD) at ORNL is responsible for the planning, conducting, and reporting of the results of radiological surveys at specified sites and associated vicinity properties. The results of these surveys are used by DOE in determining the need for and extent of remedial actions. Upon completion of the necessary remedial actions, the ORNL-RASA group or other OOS contractor may be called upon to verify the effectiveness of the remedial action. Information from these postremedialmore » action surveys is included as part of the data base used by DOE in certifying a site for unrestricted use.« less

  8. A roadmap to defining the clinical reportable ranges of chemistry analytes: Increasing automation efficiency and decreasing manual dilutions.

    PubMed

    Lo, Sheng-Ying; Baird, Geoffrey S; Greene, Dina N

    2015-12-07

    Proper utilization of resources is an important operational objective for clinical laboratories. To reduce unnecessary manual interventions on automated instruments, we conducted a workflow analysis that optimized dilution parameters and reporting of abnormally high chemistry results for the Beckman AU series of chemistry analyzers while maintaining clinically acceptable reportable ranges. Workflow analysis for the Beckman AU680/5812 and DxC800 chemistry analyzers was performed using historical data. Clinical reportable ranges for 53 chemistry analytes were evaluated. Optimized dilution parameters and upper limit of reportable ranges for the AU680/5812 instruments were derived and validated to meet these reportable ranges. The number of specimens that required manual dilutions before and after optimization was determined for both the AU680/5812 and DxC800, with the DxC800 serving as the reference instrument. Retrospective data analysis revealed that 7700 specimens required manual dilutions on the DxC over a 2-y period. Using our optimized AU-specific dilution and reporting parameters, the data-driven simulation analysis showed a 61% reduction in manual dilutions. For the specimens that required manual dilutions on the AU680/5812, we developed standardized dilution procedures to further streamline workflow. We provide a data-driven, practical outline for clinical laboratories to efficiently optimize their use of automated chemistry analyzers. The outcomes can be used to assist laboratories wishing to improve their existing procedures or to facilitate transitioning into a new line of instrumentation, regardless of the instrument model or manufacturer. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Analytical methods manual for the Mineral Resource Surveys Program, U.S. Geological Survey

    USGS Publications Warehouse

    Arbogast, Belinda F.

    1996-01-01

    The analytical methods validated by the Mineral Resource Surveys Program, Geologic Division, is the subject of this manual. This edition replaces the methods portion of Open-File Report 90-668 published in 1990. Newer methods may be used which have been approved by the quality assurance (QA) project and are on file with the QA coordinator.This manual is intended primarily for use by laboratory scientists; this manual can also assist laboratory users to evaluate the data they receive. The analytical methods are written in a step by step approach so that they may be used as a training tool and provide detailed documentation of the procedures for quality assurance. A "Catalog of Services" is available for customer (submitter) use with brief listings of:the element(s)/species determined,method of determination,reference to cite,contact person,summary of the technique,and analyte concentration range.For a copy please contact the Branch office at (303) 236-1800 or fax (303) 236-3200.

  10. A Paperless Lab Manual - Lessons Learned

    NASA Astrophysics Data System (ADS)

    Hatten, Daniel L.; Hatten, Maggie W.

    1999-10-01

    Every freshman entering Rose-Hulman Institute of Technology is equipped with a laptop computer and a software package that allow classroom and laboratory instructors the freedom to make computer-based assignments, publish course materials in electronic form, etc. All introductory physics laboratories and many of our classrooms are networked, and students routinely take their laptop computers to class/lab. The introductory physics laboratory manual was converted to HTML in the summer of 1997 and was made available to students over the Internet vice printing a paper manual during the 1998-99 school year. The aim was to reduce paper costs and allow timely updates of the laboratory experiments. A poll conducted at the end of the school year showed a generally positive student response to the online laboratory manual, with some reservations.

  11. Reliability of a Manual Procedure for Marking the EZ Endpoint Location in Patients with Retinitis Pigmentosa

    PubMed Central

    Ramachandran, Rithambara; Cai, Cindy X.; Lee, Dongwon; Epstein, Benjamin C.; Locke, Kirsten G.; Birch, David G.; Hood, Donald C.

    2016-01-01

    Purpose We developed and evaluated a training procedure for marking the endpoints of the ellipsoid zone (EZ), also known as the inner segment/outer segment (IS/OS) border, on frequency domain optical coherence tomography (fdOCT) scans from patients with retinitis pigmentosa (RP). Methods A manual for marking EZ endpoints was developed and used to train 2 inexperienced graders. After training, an experienced grader and the 2 trained graders marked the endpoints on fdOCT horizontal line scans through the macula from 45 patients with RP. They marked the endpoints on these same scans again 1 month later. Results Intragrader agreement was excellent. The intraclass correlation coefficient (ICC) was 0.99, the average difference of endpoint locations (19.6 μm) was close to 0 μm, and the 95% limits were between −284 and 323 μm, approximately ±1.1°. Intergrader agreement also was excellent. The ICC values were 0.98 (time 1) and 0.97 (time 2), the average difference among graders was close to zero, and the 95% limits of these differences was less than 350 μm, approximately 1.2°, for both test times. Conclusions While automated algorithms are becoming increasingly accurate, EZ endpoints still have to be verified manually and corrected when necessary. With training, the inter- and intragrader agreement of manually marked endpoints is excellent. Translational Relevance For clinical studies, the EZ endpoints can be marked by hand if a training procedure, including a manual, is used. The endpoint confidence intervals, well under ±2.0°, are considerably smaller than the 6° spacing for the typically used static visual field. PMID:27226930

  12. Effective teaching of manual skills to physiotherapy students: a randomised clinical trial.

    PubMed

    Rossettini, Giacomo; Rondoni, Angie; Palese, Alvisa; Cecchetto, Simone; Vicentini, Marco; Bettale, Fernanda; Furri, Laura; Testa, Marco

    2017-08-01

    To date, despite the relevance of manual skills laboratories in physiotherapy education, evidence on the effectiveness of different teaching methods is limited. Peyton's four-step and the 'See one, do one' approaches were compared for their effectiveness in teaching manual skills. A cluster randomised controlled trial was performed among final-year, right-handed physiotherapy students, without prior experience in manual therapy or skills laboratories. The manual technique of C1-C2 passive right rotation was taught by different experienced physiotherapist using Peyton's four-step approach (intervention group) and the 'See one, do one' approach (control group). Participants, teachers and assessors were blinded to the aims of the study. Primary outcomes were quality of performance at the end of the skills laboratories, and after 1 week and 1 month. Secondary outcomes were time required to teach, time required to perform the procedure and student satisfaction. A total of 39 students were included in the study (21 in the intervention group and 18 in the control group). Their main characteristics were homogeneous at baseline. The intervention group showed better quality of performance in the short, medium and long terms (F 1,111  = 35.91, p < 0.001). Both groups demonstrated decreased quality of performance over time (F 2,111  = 12.91, p < 0.001). The intervention group reported significantly greater mean ± standard deviation satisfaction (4.31 ± 1.23) than the control group (4.03 ± 1.31) (p < 0.001). Although there was no significant difference between the two methods in the time required for teaching, the time required by the intervention group to perform the procedure was significantly lower immediately after the skills laboratories and over time (p < 0.001). Peyton's four-step approach is more effective than the 'See one, do one' approach in skills laboratories aimed at developing physiotherapy student competence in C1-C2 passive mobilisation

  13. 46 CFR 153.490 - Cargo Record Book and Approved Procedures and Arrangements Manual: Categories A, B, C, and D.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Cargo Record Book and Approved Procedures and... Cargo Record Book and Approved Procedures and Arrangements Manual: Categories A, B, C, and D. (a) Unless... carry NLS cargo, a ship must have— (1) If U.S., a Cargo Record Book published by the Coast Guard (OMB...

  14. 46 CFR 153.490 - Cargo Record Book and Approved Procedures and Arrangements Manual: Categories A, B, C, and D.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Cargo Record Book and Approved Procedures and... Cargo Record Book and Approved Procedures and Arrangements Manual: Categories A, B, C, and D. (a) Unless... carry NLS cargo, a ship must have— (1) If U.S., a Cargo Record Book published by the Coast Guard (OMB...

  15. Quality Manual

    NASA Astrophysics Data System (ADS)

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  16. Semen analysis: a new manual and its application to the understanding of semen and its pathology

    PubMed Central

    Jequier, Anne M.

    2010-01-01

    This article reviews the latest edition of the World Health Organization's manual on semen analysis, a comprehensive instructional guide. The methodology used in the assessment of the usual variables in semen analysis is described, as are many of the less common, but very valuable, sperm function tests. Seminal fluid preparation techniques for procedures such as in vitro fertilization and intrauterine insemination are also outlined in the manual. In addition, it details many useful techniques for the assessment of seminal fluid. It will be a very useful manual for any laboratory that carries out analyses of seminal fluid. PMID:20111075

  17. Semen analysis: a new manual and its application to the understanding of semen and its pathology.

    PubMed

    Jequier, Anne M

    2010-01-01

    This article reviews the latest edition of the World Health Organization's manual on semen analysis, a comprehensive instructional guide. The methodology used in the assessment of the usual variables in semen analysis is described, as are many of the less common, but very valuable, sperm function tests. Seminal fluid preparation techniques for procedures such as in vitro fertilization and intrauterine insemination are also outlined in the manual. In addition, it details many useful techniques for the assessment of seminal fluid. It will be a very useful manual for any laboratory that carries out analyses of seminal fluid.

  18. Preliminary Staff Manual for the Gloucester Couny College Library.

    ERIC Educational Resources Information Center

    Salisbury, Julie Davitt

    This manual is a summary of the policies and procedures now in effect in the Gloucester County College Library. The first 41 pages deal with such items as: (1) importance of preparing a manual, (2) types of manuals, (3) procedures for compiling a staff manual, (4) requirements of a staff manual, (5) uses of the staff manual, (6) history of the…

  19. Usefulness and Limitation of Manual Aspiration Immediately After Pneumothorax Complicating Interventional Radiological Procedures with the Transthoracic Approach

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yamagami, Takuji, E-mail: yamagami@koto.kpu-m.ac.jp; Kato, Takeharu; Hirota, Tatsuya

    2006-12-15

    The goal of this study was to evaluate the efficacy of simple aspiration of air from the pleural space to prevent increased pneumothorax and avoid chest tube placement in cases of pneumothorax following interventional radiological procedures performed under computed tomography fluoroscopic guidance with the transthoracic percutaneous approach. While still on the scanner table, 102 cases underwent percutaneous manual aspiration of a moderate or large pneumothorax that had developed during mediastinal, lung, and transthoracic liver biopsies and ablations of lung and hepatic tumors (independent of symptoms). Air was aspirated from the pleural space by an 18- or 20-gauge intravenous catheter attachedmore » to a three-way stopcock and 20- or 50-mL syringe. We evaluated the management of each such case during and after manual aspiration. In 87 of the 102 patients (85.3%), the pneumothorax had resolved completely on follow-up chest radiographs without chest tube placement, but chest tube placement was required in 15 patients. Requirement of chest tube insertion significantly increased in parallel with the increased volume of aspirated air. When receiver-operating characteristic curves were applied retrospectively, the optimal cutoff level of aspirated air on which to base a decision to abandon manual aspiration alone and resort to chest tube placement was 670 mL. Percutaneous manual aspiration of the pneumothorax performed immediately after the procedure might prevent progressive pneumothorax and eliminate the need for chest tube placement. However, when the amount of aspirated air is large (such as more than 670 mL), chest tube placement should be considered.« less

  20. Users manual for the US baseline corn and soybean segment classification procedure

    NASA Technical Reports Server (NTRS)

    Horvath, R.; Colwell, R. (Principal Investigator); Hay, C.; Metzler, M.; Mykolenko, O.; Odenweller, J.; Rice, D.

    1981-01-01

    A user's manual for the classification component of the FY-81 U.S. Corn and Soybean Pilot Experiment in the Foreign Commodity Production Forecasting Project of AgRISTARS is presented. This experiment is one of several major experiments in AgRISTARS designed to measure and advance the remote sensing technologies for cropland inventory. The classification procedure discussed is designed to produce segment proportion estimates for corn and soybeans in the U.S. Corn Belt (Iowa, Indiana, and Illinois) using LANDSAT data. The estimates are produced by an integrated Analyst/Machine procedure. The Analyst selects acquisitions, participates in stratification, and assigns crop labels to selected samples. In concert with the Analyst, the machine digitally preprocesses LANDSAT data to remove external effects, stratifies the data into field like units and into spectrally similar groups, statistically samples the data for Analyst labeling, and combines the labeled samples into a final estimate.

  1. 42 CFR 493.1361 - Condition: Laboratories performing PPM procedures; testing personnel.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Laboratories performing PPM procedures; testing personnel. 493.1361 Section 493.1361 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS...

  2. 42 CFR 493.1361 - Condition: Laboratories performing PPM procedures; testing personnel.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Condition: Laboratories performing PPM procedures; testing personnel. 493.1361 Section 493.1361 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS...

  3. User's manual for a 0.3-m TCT wall interference assessment/correction procedure: 8- by 24-inch airfoil test section

    NASA Technical Reports Server (NTRS)

    Gumbert, C. R.

    1985-01-01

    A transonic Wall-Interference Assessment/Correction (WIAC) procedure has been developed and verified for the 8- by 24-inch airfoil test section of the Langley 0.3-m Transonic Cryogenic Tunnel. This report is a user's manual for the correction procedure. It includes a listing of the computer procedure file as well as input for and results from a step-by-step sample case.

  4. Predictive design procedures, VESYS users manual : an interim design method for flexible pavements using the VESYS structural subsystem

    DOT National Transportation Integrated Search

    1978-01-01

    This manual has been written to provide the pavement manager and design engineer with a ready reference of procedures to predict the structural responses and hence the integrity of flexible pavements. A pavement section of known geometry is chosen, a...

  5. Welding Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment as welders. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi volume begins with the MASTER…

  6. The Assessment Supplement: A Faculty-Designed Addition to NCC's Manual, "Concepts & Procedures for Academic Assessment." First Edition.

    ERIC Educational Resources Information Center

    Nassau Community Coll., Garden City, NY.

    This document is the first in a series of annual, faculty-designed supplements to Nassau Community College's (NCC's) (New York) manual, "Concepts & Procedures for Academic Assessment." The supplements are intended to provide faculty a forum through which they can communicate assessment designs and the impacts of those designs on…

  7. Sandia SWiFT Wind Turbine Manual.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    White, Jonathan; LeBlanc, Bruce Philip; Berg, Jonathan Charles

    The Scaled Wind Farm Technology (SWiFT) facility, operated by Sandia National Laboratories for the U.S. Department of Energy's Wind and Water Power Program, is a wind energy research site with multiple wind turbines scaled for the experimental study of wake dynamics, advanced rotor development, turbine control, and advanced sensing for production-scale wind farms. The SWiFT site currently includes three variable-speed, pitch-regulated, three-bladed wind turbines. The six volumes of this manual provide a detailed description of the SWiFT wind turbines, including their operation and user interfaces, electrical and mechanical systems, assembly and commissioning procedures, and safety systems. Further dissemination only asmore » authorized to U.S. Government agencies and their contractors; other requests shall be approved by the originating facility or higher DOE programmatic authority. 111 UNCLASSIFIED UNLIMITED RELEASE Sandia SWiFT Wind Turbine Manual (SAND2016-0746 ) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Site Supervisor Dave Mitchell (6121) Date Note: Document revision logs are found after the title page of each volume of this manual. iv« less

  8. A manual for a laboratory information management system (LIMS) for light stable isotopes

    USGS Publications Warehouse

    Coplen, Tyler B.

    1997-01-01

    The reliability and accuracy of isotopic data can be improved by utilizing database software to (i) store information about samples, (ii) store the results of mass spectrometric isotope-ratio analyses of samples, (iii) calculate analytical results using standardized algorithms stored in a database, (iv) normalize stable isotopic data to international scales using isotopic reference materials, and (v) generate multi-sheet paper templates for convenient sample loading of automated mass-spectrometer sample preparation manifolds. Such a database program is presented herein. Major benefits of this system include (i) an increase in laboratory efficiency, (ii) reduction in the use of paper, (iii) reduction in workload due to the elimination or reduction of retyping of data by laboratory personnel, and (iv) decreased errors in data reported to sample submitters. Such a database provides a complete record of when and how often laboratory reference materials have been analyzed and provides a record of what correction factors have been used through time. It provides an audit trail for stable isotope laboratories. Since the original publication of the manual for LIMS for Light Stable Isotopes, the isotopes 3 H, 3 He, and 14 C, and the chlorofluorocarbons (CFCs), CFC-11, CFC-12, and CFC-113, have been added to this program.

  9. A manual for a Laboratory Information Management System (LIMS) for light stable isotopes

    USGS Publications Warehouse

    Coplen, Tyler B.

    1998-01-01

    The reliability and accuracy of isotopic data can be improved by utilizing database software to (i) store information about samples, (ii) store the results of mass spectrometric isotope-ratio analyses of samples, (iii) calculate analytical results using standardized algorithms stored in a database, (iv) normalize stable isotopic data to international scales using isotopic reference materials, and (v) generate multi-sheet paper templates for convenient sample loading of automated mass-spectrometer sample preparation manifolds. Such a database program is presented herein. Major benefits of this system include (i) an increase in laboratory efficiency, (ii) reduction in the use of paper, (iii) reduction in workload due to the elimination or reduction of retyping of data by laboratory personnel, and (iv) decreased errors in data reported to sample submitters. Such a database provides a complete record of when and how often laboratory reference materials have been analyzed and provides a record of what correction factors have been used through time. It provides an audit trail for stable isotope laboratories. Since the original publication of the manual for LIMS for Light Stable Isotopes, the isotopes 3 H, 3 He, and 14 C, and the chlorofluorocarbons (CFCs), CFC-11, CFC-12, and CFC-113, have been added to this program.

  10. Partial Red Blood Cell Exchange in Children and Young Patients with Sickle Cell Disease: Manual Versus Automated Procedure.

    PubMed

    Escobar, Carlos; Moniz, Marta; Nunes, Pedro; Abadesso, Clara; Ferreira, Teresa; Barra, António; Lichtner, Anabela; Loureiro, Helena; Dias, Alexandra; Almeida, Helena

    2017-10-31

    The benefits of manual versus automated red blood cell exchange have rarely been documented and studies in young sickle cell disease patients are scarce. We aim to describe and compare our experience in these two procedures. Young patients (≤ 21 years old) who underwent manual- or automated-red blood cell exchange for prevention or treatment of sickle cell disease complications were included. Clinical, technical and hematological data were prospectively recorded and analyzed. Ninety-four red blood cell exchange sessions were performed over a period of 68 months, including 57 manual and 37 automated, 63 for chronic complications prevention, 30 for acute complications and one in the pre-operative setting. Mean decrease in sickle hemoglobin levels was higher in automated-red blood cell exchange (p < 0.001) and permitted a higher sickle hemoglobin level decrease per volume removed (p < 0.001), while hemoglobin and hematocrit remained stable. Ferritin levels on chronic patients decreased 54%. Most frequent concern was catheter outflow obstruction on manual-red blood cell exchange and access alarm on automated-red blood cell exchange. No major complication or alloimunization was recorded. Automated-red blood cell exchange decreased sickle hemoglobin levels more efficiently than manual procedure in the setting of acute and chronic complications of sickle cell disease, with minor technical concerns mainly due to vascular access. The threshold of sickle hemoglobin should be individualized for clinical and hematological goals. In our cohort of young patients, the need for an acceptable venous access was a limiting factor, but iron-overload was avoided. Automated red blood cell exchange is safe and well tolerated. It permits a higher sickle hemoglobin removal efficacy, better volume status control and iron-overload avoidance.

  11. Implementing self sustained quality control procedures in a clinical laboratory.

    PubMed

    Khatri, Roshan; K C, Sanjay; Shrestha, Prabodh; Sinha, J N

    2013-01-01

    Quality control is an essential component in every clinical laboratory which maintains the excellence of laboratory standards, supplementing to proper disease diagnosis, patient care and resulting in overall strengthening of health care system. Numerous quality control schemes are available, with combinations of procedures, most of which are tedious, time consuming and can be "too technical" whereas commercially available quality control materials can be expensive especially for laboratories in developing nations like Nepal. Here, we present a procedure performed at our centre with self prepared control serum and use of simple statistical tools for quality assurance. The pooled serum was prepared as per guidelines for preparation of stabilized liquid quality control serum from human sera. Internal Quality Assessment was performed on this sample, on a daily basis which included measurement of 12 routine biochemical parameters. The results were plotted on Levey-Jennings charts and analysed with quality control rules, for a period of one month. The mean levels of biochemical analytes in self prepared control serum were within normal physiological range. This serum was evaluated every day along with patients' samples. The results obtained were plotted on control charts and analysed using common quality control rules to identify possible systematic and random errors. Immediate mitigation measures were taken and the dispatch of erroneous reports was avoided. In this study we try to highlight on a simple internal quality control procedure which can be performed by laboratories, with minimum technology, expenditure, and expertise and improve reliability and validity of the test reports.

  12. Asphalt pavement inspector's manual

    DOT National Transportation Integrated Search

    2002-07-01

    The information currently available on asphalt paving would fill a small library. Furthermore, DOT&PF's Alaska Construction Manual describes procedures for the Department's staff to use on all aspects of construction projects. This manual draws on th...

  13. Best practices procurement manual

    DOT National Transportation Integrated Search

    2002-08-01

    This Manual provides recipients of Federal Transit Administration (FTA) funds suggestions on conducting third party procurements to assist them in meeting the standards of FTA Circular 4220.1D (the Circular). The Manual consists of suggested procedur...

  14. Project Developmental Continuity: Field Procedures Manual.

    ERIC Educational Resources Information Center

    Morris, Mary

    This operations manual for field staff (site monitors, site coordinators, and testers) involved in the observation and testing of children is part of a series of documents on the evaluation of Project Developmental Continuity (PDC), a Head Start demonstration program aimed at providing educational and developmental continuity between children's…

  15. Industrial Maintenance Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 1-year vocational training program to prepare students for entry-level employment as industrial maintenance technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi…

  16. WIM data analyst's manual

    DOT National Transportation Integrated Search

    2010-06-01

    This manual provides information and recommended procedures to be utilized by an agencys Weigh-in-Motion (WIM) Office Data Analyst to perform validation and quality control (QC) checks of WIM traffic data. This manual focuses on data generated by ...

  17. Laser Machining Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 1-year vocational training program to prepare students for entry-level employment as laser machining technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi volume…

  18. Manufacturing Technology Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment as manufacturing technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi volume begins…

  19. Dental Charting. Student's Manual.

    ERIC Educational Resources Information Center

    Weaver, Trudy Karlene; Apfel, Maura

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: dental anatomical terminology; tooth numbering systems;…

  20. Federal Logistics Information System (FLIS) Procedures Manual. Volume 5: Data Bank Interrogations/Search.

    DTIC Science & Technology

    1995-04-01

    NO. 5 DoD 4100.39-M D oD 4100.39-MN Volume 5 DLSC- VPH 1 January 1997 "N FEDERAL LOGISTICS INFORMATION SYSTEM (FLIS) PROCEDURES MANUAL I. Volume 5. DoD...LOGISTICS SERVICES CENTER 74 WASHINGTON AVE N BATTLE CREEK MI 49017-3084 CH 4 CHANGE NO. 4 DoD 4100.39-M DoD 4100.39-M Volume 5 DLSC- VPH 1 July 1996 "FEDERAL...CENTER Volume 5 74 WASHINGTON AVE N BATTLE CREEK, MI 49017-3084 DLSC- VPH 1 April 1995 FOREWORD This is one of the volumes (see backside of cover for

  1. Mold Making Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of a course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment as mold makers. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi volume begins with the…

  2. [Quality Management System in Pathological Laboratory].

    PubMed

    Koyatsu, Junichi; Ueda, Yoshihiko

    2015-07-01

    Even compared to other clinical laboratories, the pathological laboratory conducts troublesome work, and many of the work processes are also manual. Therefore, the introduction of the systematic management of administration is necessary. It will be a shortcut to use existing standards such as ISO 15189 for this purpose. There is no standard specialized for the pathological laboratory, but it is considered to be important to a pathological laboratory in particular. 1. Safety nianagement of the personnel and environmental conditions. Comply with laws and regulations concerning the handling of hazardous materials. 2. Pre-examination processes. The laboratory shall have documented procedures for the proper collection and handling of primary samples. Developed and documented criteria for acceptance or rejection of samples are applied. 3. Examination processes. Selection, verification, and validation of the examination procedures. Devise a system that can constantly monitor the traceability of the sample. 4. Post-examination processes. Storage, retention, and disposal of clinical samples. 5. Release of results. When examination results fall within established alert or critical intervals, immediately notify the physicians. The important point is to recognize the needs of the client and be aware that pathological diagnoses are always "the final diagnoses".

  3. An Efficient Procedure for Removal and Inactivation of Alpha-Synuclein Assemblies from Laboratory Materials.

    PubMed

    Bousset, Luc; Brundin, Patrik; Böckmann, Anja; Meier, Beat; Melki, Ronald

    2016-01-01

    Preformed α-synuclein fibrils seed the aggregation of soluble α-synuclein in cultured cells and in vivo. This, and other findings, has kindled the idea that α-synuclein fibrils possess prion-like properties. As α-synuclein fibrils should not be considered as innocuous, there is a need for decontamination and inactivation procedures for laboratory benches and non-disposable laboratory material. We assessed the effectiveness of different procedures designed to disassemble α-synuclein fibrils and reduce their infectivity. We examined different commercially available detergents to remove α-synuclein assemblies adsorbed on materials that are not disposable and that are most found in laboratories (e.g. plastic, glass, aluminum or stainless steel surfaces). We show that methods designed to decrease PrP prion infectivity neither effectively remove α-synuclein assemblies adsorbed to different materials commonly used in the laboratory nor disassemble the fibrillar form of the protein with efficiency. In contrast, both commercial detergents and SDS detached α-synuclein assemblies from contaminated surfaces and disassembled the fibrils. We describe three cleaning procedures that effectively remove and disassemble α-synuclein seeds. The methods rely on the use of detergents that are compatible with most non-disposable tools in a laboratory. The procedures are easy to implement and significantly decrease any potential risks associated to handling α-synuclein assemblies.

  4. Facilities Policies and Procedures Manual. South Carolina Commission on Higher Education. Division of Finance, Facilities, and Statistical Services.

    ERIC Educational Resources Information Center

    South Carolina Commission on Higher Education, Columbia.

    This manual outlines the policies and procedures related to the submission and review of facilities projects at South Carolina's public colleges and universities. It provides an overview of the South Carolina Commission on Higher Education's role and responsibilities and its general policy regarding permanent improvements to facilities. The report…

  5. Data collection procedures for the Software Engineering Laboratory (SEL) database

    NASA Technical Reports Server (NTRS)

    Heller, Gerard; Valett, Jon; Wild, Mary

    1992-01-01

    This document is a guidebook to collecting software engineering data on software development and maintenance efforts, as practiced in the Software Engineering Laboratory (SEL). It supersedes the document entitled Data Collection Procedures for the Rehosted SEL Database, number SEL-87-008 in the SEL series, which was published in October 1987. It presents procedures to be followed on software development and maintenance projects in the Flight Dynamics Division (FDD) of Goddard Space Flight Center (GSFC) for collecting data in support of SEL software engineering research activities. These procedures include detailed instructions for the completion and submission of SEL data collection forms.

  6. Dental Laboratory Technology.

    ERIC Educational Resources Information Center

    Department of the Air Force, Washington, DC.

    The Air Force dental laboratory technology manual is designed as a basic training text as well as a reference source for dental laboratory technicians, a specialty occupation concerned with the design, fabrication, and repair of dental prostheses. Numerous instructive diagrams and photographs are included throughout the manual. The comprehensive…

  7. Safety Policy and Procedure Manual (Electronic Version)

    DOT National Transportation Integrated Search

    1997-08-18

    The state Secretary of Transportation has set a goal of zero accidents for the : North Carolina Department of Transportation (NCDOT). To guide the NCDOT towards : that goal, this safety manual sets for philosophy, goals, cardinal rules : (grounds for...

  8. Miami University Information Manual.

    ERIC Educational Resources Information Center

    Miami Univ., Oxford, OH.

    The 1975 information manual is designed to provide current data on policies, procedures, services, facilities, organization and governance of Miami University and, through the extensive index, quick access to this information. The manual is complementary to the university catalog and directory. Information relating to students is in the Student…

  9. The American University Hotline: Manual for Trainers.

    ERIC Educational Resources Information Center

    Krieger, Howard; And Others

    The philosophy, rationale, and specific training procedures of the American University Hotline are detailed in this trainer's manual. The manual provides a step-by-step discussion of training procedures implemented in a student-operated university hotline telephone service. The training package, widely disseminated over the past six years, has…

  10. An Efficient Procedure for Removal and Inactivation of Alpha-Synuclein Assemblies from Laboratory Materials

    PubMed Central

    Bousset, Luc; Brundin, Patrik; Böckmann, Anja; Meier, Beat; Melki, Ronald

    2015-01-01

    Background: Preformed α-synuclein fibrils seed the aggregation of soluble α-synuclein in cultured cells and in vivo. This, and other findings, has kindled the idea that α-synuclein fibrils possess prion-like properties. Objective: As α-synuclein fibrils should not be considered as innocuous, there is a need for decontamination and inactivation procedures for laboratory benches and non-disposable laboratory material. Methods: We assessed the effectiveness of different procedures designed to disassemble α-synuclein fibrils and reduce their infectivity. We examined different commercially available detergents to remove α-synuclein assemblies adsorbed on materials that are not disposable and that are most found in laboratories (e.g. plastic, glass, aluminum or stainless steel surfaces). Results: We show that methods designed to decrease PrP prion infectivity neither effectively remove α-synuclein assemblies adsorbed to different materials commonly used in the laboratory nor disassemble the fibrillar form of the protein with efficiency. In contrast, both commercial detergents and SDS detached α-synuclein assemblies from contaminated surfaces and disassembled the fibrils. Conclusions: We describe three cleaning procedures that effectively remove and disassemble α-synuclein seeds. The methods rely on the use of detergents that are compatible with most non-disposable tools in a laboratory. The procedures are easy to implement and significantly decrease any potential risks associated to handling α-synuclein assemblies. PMID:26639448

  11. PUB-3000 | BERKELEY LAB HEALTH AND SAFETY MANUAL

    Science.gov Websites

    ES&H MANUAL (PUB-3000) Berkeley Lab Table of Contents Guide to Using the ES&H Manual Responsible Authors Log of ES&H Manual Changes Requesting a Change to the ES&H Manual Search the ES &H Manual Questions & Comments Lawrence Berkeley National Laboratory University of California

  12. Automated Equipment Repair Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 1-year vocational training program to prepare students for entry-level employment as automated equipment repair technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi…

  13. The NASTRAN theoretical manual (level 16.0)

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The manual is a commentary on the NASTRAN computer program, introducing the program to all interested persons. The manual's most important function is to present the developments of the analytical and numerical procedures that underlie the program. This manual is one of the four manuals which document the NASTRAN computer program.

  14. 76 FR 17367 - National Voluntary Laboratory Accreditation Program; Operating Procedures

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-29

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology 15 CFR Part 285 [Docket No: 110125063-1062-02] RIN 0693-AB61 National Voluntary Laboratory Accreditation Program; Operating Procedures AGENCY: National Institute of Standards and Technology (NIST), Commerce. ACTION: Notice of proposed...

  15. Materials inventory management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This NASA Materials Inventory Management Manual (NHB 4100.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958 (42 USC 2473). It sets forth policy, performance standards, and procedures governing the acquisition, management and use of materials. This Manual is effective upon receipt.

  16. Aircraft operations management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  17. TADS Needs Assessment Procedures Manual, Summer 1980.

    ERIC Educational Resources Information Center

    Black, Talbot; And Others

    The TADS (Technical Assistance Development System) Needs Assessment Manual is designed to guide the comprehensive review of Handicapped Children's Early Education Program (HCEEP) demonstration projects in identifying technical assistance needs. An introduction reviews the TADS technical assistance model which includes program planning, needs…

  18. Industrial labor relations manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA Industrial Labor Relations Manual provides internal guidelines and procedures to assist NASA Field Installations in dealing with contractor labor management disputes, Service Contract Act variance hearings, and to provide access of Labor Union Representatives to NASA for the purpose of maintaining schedules and goals in connection with vital NASA programs. This manual will be revised by page changes as revisions become necessary. Initial distribution of this manual has been made to NASA Headquarters and Field Installations.

  19. Dental Chairside Technique. Student's Manual.

    ERIC Educational Resources Information Center

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  20. Alaska Administrative Manual

    Science.gov Websites

    Search the Division of Finance site DOF State of Alaska Finance Home Content Area Accounting Charge Cards Administrative Manual Table of Contents Contains State of Alaska accounting/payroll policies and information clarifying accounting and payroll procedures. Policies are carried out through standard statewide procedures

  1. Custodial Methods and Procedures Manual. Third Edition.

    ERIC Educational Resources Information Center

    Johnson, Donald R.

    This manual discusses school facility cleaning and maintenance from the expanded perspective of work management, physical assets management, and resource management. Work management encompasses the organization of work and personnel, scheduling of daily or routine duties and tasks, and handling of demand work. Physical asset management includes…

  2. St. Louis Regional Library Network Manuals: Delivery System Manual, INFO-PASS Manual, Interlibrary Loan Protocol, Procedures and Policies Manual.

    ERIC Educational Resources Information Center

    Saint Louis Regional Library Network, MO.

    Included in this set of manuals are: (1) guidelines for document delivery to member libraries within the St. Louis Regional Library Network (SLRLN) in which eligible materials are described, addressing and packing are outlined, routing and deliveries are discussed, and a list of delivery system participants is provided; (2) a descriptive guide to…

  3. 14 CFR 21.308 - Quality manual.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Quality manual. 21.308 Section 21.308... PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and Appliances § 21.308 Quality manual. Each applicant for or holder of a PMA must provide a manual describing its quality system to the...

  4. Advanced CNC and CAM Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and student laboratory manual for a 1-year vocational training program to prepare students for entry-level positions as advanced computer numerical control (CNC) and computer-assisted manufacturing (CAM) technicians.. The program was developed through a modification of the DACUM…

  5. Clinical laboratory urine analysis: comparison of the UriSed automated microscopic analyzer and the manual microscopy.

    PubMed

    Ma, Junlong; Wang, Chengbin; Yue, Jiaxin; Li, Mianyang; Zhang, Hongrui; Ma, Xiaojing; Li, Xincui; Xue, Dandan; Qing, Xiaoyan; Wang, Shengjiang; Xiang, Daijun; Cong, Yulong

    2013-01-01

    Several automated urine sediment analyzers have been introduced to clinical laboratories. Automated microscopic pattern recognition is a new technique for urine particle analysis. We evaluated the analytical and diagnostic performance of the UriSed automated microscopic analyzer and compared with manual microscopy for urine sediment analysis. Precision, linearity, carry-over, and method comparison were carried out. A total of 600 urine samples sent for urinalysis were assessed using the UriSed automated microscopic analyzer and manual microscopy. Within-run and between-run precision of the UriSed for red blood cells (RBC) and white blood cells (WBC) were acceptable at all levels (CV < 20%). Within-run and between-run imprecision of the UriSed testing for cast, squamous epithelial cells (EPI), and bacteria (BAC) were good at middle level and high level (CV < 20%). The linearity analysis revealed substantial agreement between the measured value and the theoretical value of the UriSed for RBC, WBC, cast, EPI, and BAC (r > 0.95). There was no carry-over. RBC, WBC, and squamous epithelial cells with sensitivities and specificities were more than 80% in this study. There is substantial agreement between the UriSed automated microscopic analyzer and the manual microscopy methods. The UriSed provides for a rapid turnaround time.

  6. Manual for the Comparative Politics Laboratory: Conditions for Effective Democracy.

    ERIC Educational Resources Information Center

    Fogelman, Edwin; Zingale, Nancy

    This manual introduces undergraduate students in political science to major types of data and methods for cross-national quantitative analysis. The manual's topic, Conditions for Effective Democracy, was chosen because it incorporates several different kinds of data and illustrates various methodological problems. The data are cross-sectional…

  7. Innovative strategy for effective critical laboratory result management: end-to-end process using automation and manual call centre.

    PubMed

    Ti, Lian Kah; Ang, Sophia Bee Leng; Saw, Sharon; Sethi, Sunil Kumar; Yip, James W L

    2012-08-01

    Timely reporting and acknowledgement are crucial steps in critical laboratory results (CLR) management. The authors previously showed that an automated pathway incorporating short messaging system (SMS) texts, auto-escalation, and manual telephone back-up improved the rate and speed of physician acknowledgement compared with manual telephone calling alone. This study investigated if it also improved the rate and speed of physician intervention to CLR and whether utilising the manual back-up affected intervention rates. Data from seven audits between November 2007 and January 2011 were analysed. These audits were carried out to assess the robustness of CLR reporting process in the authors' institution. Comparisons were made in the rate and speed of acknowledgement and intervention between the audits performed before and after automation. Using the automation audits, the authors compared intervention data between communication with SMS only and when manual intervention was required. 1680 CLR were reported during the audit periods. Automation improved the rate (100% vs 84.2%; p<0.001) and speed (median 12 min vs 23 min; p<0.001) of CLR acknowledgement. It also improved the rate (93.7% vs 84.0%, p<0.001) and speed (median 21 min vs 109 min; p<0.001) of CLR intervention. From the automation audits, the use of SMS only did not improve physician intervention rates. The automated communication pathway improved physician intervention rate and time in tandem with improved acknowledgement rate and time when compared with manual telephone calling. The use of manual intervention to augment automation did not adversely affect physician intervention rate, implying that an end-to-end pathway was more important than automation alone.

  8. Missouri Secondary Science Safety Manual.

    ERIC Educational Resources Information Center

    Lemons, Judith L.

    The purpose of this safety manual is to provide a resource to help manage and minimize potential risks in science classrooms where students spend up to 60% of instructional time engaged in hands-on activities. This manual contains information on standards, legal aspects, and responsibilities for science safety; general laboratory safety for…

  9. A laboratory procedure for measuring and georeferencing soil colour

    NASA Astrophysics Data System (ADS)

    Marques-Mateu, A.; Balaguer-Puig, M.; Moreno-Ramon, H.; Ibanez-Asensio, S.

    2015-04-01

    Remote sensing and geospatial applications very often require ground truth data to assess outcomes from spatial analyses or environmental models. Those data sets, however, may be difficult to collect in proper format or may even be unavailable. In the particular case of soil colour the collection of reliable ground data can be cumbersome due to measuring methods, colour communication issues, and other practical factors which lead to a lack of standard procedure for soil colour measurement and georeferencing. In this paper we present a laboratory procedure that provides colour coordinates of georeferenced soil samples which become useful in later processing stages of soil mapping and classification from digital images. The procedure requires a laboratory setup consisting of a light booth and a trichromatic colorimeter, together with a computer program that performs colour measurement, storage, and colour space transformation tasks. Measurement tasks are automated by means of specific data logging routines which allow storing recorded colour data in a spatial format. A key feature of the system is the ability of transforming between physically-based colour spaces and the Munsell system which is still the standard in soil science. The working scheme pursues the automation of routine tasks whenever possible and the avoidance of input mistakes by means of a convenient layout of the user interface. The program can readily manage colour and coordinate data sets which eventually allow creating spatial data sets. All the tasks regarding data joining between colorimeter measurements and samples locations are executed by the software in the background, allowing users to concentrate on samples processing. As a result, we obtained a robust and fully functional computer-based procedure which has proven a very useful tool for sample classification or cataloging purposes as well as for integrating soil colour data with other remote sensed and spatial data sets.

  10. Low Temperature Power Coating (LTPC) Phase 2 Laboratory Test Plan and Procedures for PACAF (Rev D)

    DTIC Science & Technology

    2018-03-20

    Δa*, LTPC Phase II Laboratory Test Plan and Procedures Rev D (CDRL A004) BATTELLE | 20 March 2018 | 6 Δb* and ΔE will be calculated post ...BATTELLE | CONTRACT NUMBER: FA8532-17-C-0008 (CDRL A004) LTPC Phase II Laboratory Test Plan and Procedures (Rev D) Prepared by... Test Plan and Procedures Rev D (CDRL A004) BATTELLE | 20 March 2018 | i List of Acronyms AGE Aircraft Ground Equipment ASTM American

  11. FIELD CHECK MANUAL FOR LANGUAGE LABORATORIES, A SERIES OF TESTS WHICH A NON-TECHNICAL PERSON CAN CONDUCT TO VERIFY SPECIFICATIONS.

    ERIC Educational Resources Information Center

    GRITTNER, FRANK; PAVLAT, RUSSELL

    IN ORDER TO ASSIST NON-TECHNICAL PEOPLE IN SCHOOLS TO CONDUCT A FIELD CHECK OF LANGUAGE LABORATORY EQUIPMENT BEFORE THEY MAKE FINAL PAYMENTS, THIS MANUAL OFFERS CRITERIA, TESTS, AND METHODS OF SCORING THE QUALITY OF THE EQUIPMENT. CHECKLISTS ARE PROVIDED FOR EVALUATING CONSOLE FUNCTIONS, TAPE RECORDERS, AMPLIFIERS, SOUND QUALITY (INCLUDING…

  12. Study of Visual and Auditory Presentation in Dental Lecture and Laboratory Instruction. Final Report.

    ERIC Educational Resources Information Center

    Allen, William H.; And Others

    This study compared the relative effectiveness of an automated teaching machine with instructor presented instruction in graduate dental teaching. The objectives were to: (1) determine the effects of 3 laboratory instructional procedures used in combination with 2 lectures on the acquisition of manual operative skills, the learning of information…

  13. Single-session manualized ego state therapy (EST) for combat stress injury, PTSD, and ASD, Part 2: the procedure.

    PubMed

    Barabasz, Arreed F; Barabasz, Marianne; Watkins, John G

    2012-01-01

    An abbreviated description of our single-session 5- to 6-hour procedure is provided. In contrast to trauma reframing approaches, such as cognitive processing therapy (CPT) or traditional psychoanalytic interventions, our manualized procedure rapidly demystifies subconscious processes, making them accessible and understandable by the patient. The therapist's supportive ego strength is integrated into the intense repeated emotional and physiological releases of the traumatized ego states. The abreactive component of this 5-phase procedure exhausts the bound-up psychological and physiological reactions but also serves to quickly overcome the trauma and to restructure the personality. The patient becomes empowered to release the trauma memories and to emerge with the ability to be adaptive, assertive, giving, strong, and able to express anger appropriately yet be caring with family/friends.

  14. Microscale Organic Laboratory: IV. A Simple and Rapid Procedure for Carrying Out Wittig Reactions.

    ERIC Educational Resources Information Center

    Pike, R. M.; And Others

    1986-01-01

    Describes two examples where synthetic salt-base mixtures are used in a microscale organic laboratory program as a simple and quick procedure for carrying out Wittig reactions. Both experimental procedures are outlined and discussed. (TW)

  15. Solar Simulation Laboratory Description and Manual.

    DTIC Science & Technology

    1985-06-01

    2000 was sent back to Cyborg Corp. three times over a five month period for repairs. The solar lab is presently using a loaner from Cyborg Corp. The IBM...PC/XT is connected to the ISAAC 2000 by a RS232 connection. All programs were written in advanced basic ("BASICA"). BASICA was used because Cyborg ...2067 CH/P Temperature.Control Bath TechnicalManual, November. 1980. A 30. Cyborg Corporation, Version 1.2, IS..AC.....Co..mpiut.er.liz e.d Data

  16. Tool & Die and EDM Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment as tool and die makers. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi volume begins with…

  17. The NASTRAN User's Manual (Level 15)

    NASA Technical Reports Server (NTRS)

    Mccormick, C. W. (Editor)

    1972-01-01

    The User's manual for the NASA Structural Analysis (NASTRAN) program is presented. The manual contains all information needed to solve problems with NASTRAN. The volume is instructional and encyclopedic. The manual includes instruction in structural modeling techniques, instruction in input preparation, and information to assist the interpretation of the output. Descriptions of all input data cards, restart procedures, and diagnostic messages are developed.

  18. Characteristic values of the lumbar load of manual patient handling for the application in workers' compensation procedures.

    PubMed

    Jordan, Claus; Luttmann, Alwin; Theilmeier, Andreas; Kuhn, Stefan; Wortmann, Norbert; Jäger, Matthias

    2011-05-26

    The human spine is often exposed to mechanical load in vocational activities especially in combination with lifting, carrying and positioning of heavy objects. This also applies in particular to nursing activities with manual patient handling. In the present study a detailed investigation on the load of the lumbar spine during manual patient handling was performed. For a total of 13 presumably endangering activities with transferring a patient, the body movements performed by healthcare workers were recorded and the exerted action forces were determined with regard to magnitude, direction and lateral distribution in the time course with a "measuring bed", a "measuring chair" and a "measuring floor". By the application of biomechanical model calculations the load on the lowest intervertebral disc of the lumbar spine (L5-S1) was determined considering the posture and action force data for every manual patient handling. The results of the investigations reveal the occurrence of high lumbar load during manual patient handling activities, especially in those cases, where awkward postures of the healthcare worker are combined with high action forces caused by the patient's mass. These findings were compared to suitable issues of corresponding investigations provided in the literature. Furthermore measurement-based characteristic values of lumbar load were derived for the use in statement procedures concerning the disease no. 2108 of the German list of occupational diseases. To protect healthcare workers from mechanical overload and the risk of developing a disc-related disease, prevention measures should be compiled. Such measures could include the application of "back-fairer" nursing techniques and the use of "technical" and" small aids" to reduce the lumbar load during manual patient handling. Further studies, concerning these aspects, are necessary.

  19. Inorganic Analyses in Water Quality Control Programs. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This document is a lecture/laboratory manual dealing with the analysis of selected inorganic pollutants. The manual is an instructional aid for classroom presentations to those with little or no experience in the field, but having one year (or equivalent) of college level inorganic chemistry and having basic laboratory skills. Topics include:…

  20. Dysfunctional Workers, Functional Texts: The Transformation of Work in Institutional Procedure Manuals.

    ERIC Educational Resources Information Center

    Sullivan, Francis J.

    1997-01-01

    Examines how conflicts between management and workers over division of labor are enacted in two manuals--the official manual operationalizing Internal Revenue Service (IRS) regulations and a "translation" of the official manual--governing tax examiners' work in an IRS Service Center. Finds that systemic differences between the manuals…

  1. Operating manual for the Bulk Shielding Reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1983-04-01

    The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxillary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supercedes all previous operating manuals for the BSR.

  2. Operating manual for the Bulk Shielding Reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1987-03-01

    The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxiliary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supersedes all previous operating manuals for the BSR.

  3. Radiological control manual. Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPPmore » and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.« less

  4. Dental Assisting Laboratory Manual.

    ERIC Educational Resources Information Center

    Thiel, Sandra J.

    Compiled to introduce the dental assisting student to various techniques used in the dental office and to present theoretical information essential for the student's professional development, this laboratory guide consists of three units of instruction. The first unit is an introduction to dental assisting and contains five topics of study. The…

  5. Battery Test Manual For Plug-In Hybrid Electric Vehicles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jeffrey R. Belt

    2010-09-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less

  6. Battery Test Manual For Plug-In Hybrid Electric Vehicles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jeffrey R. Belt

    2010-12-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less

  7. Particle Size Distribution of Serratia marcescens Aerosols Created During Common Laboratory Procedures and Simulated Laboratory Accidents

    PubMed Central

    Kenny, Michael T.; Sabel, Fred L.

    1968-01-01

    Andersen air samplers were used to determine the particle size distribution of Serratia marcescens aerosols created during several common laboratory procedures and simulated laboratory accidents. Over 1,600 viable particles per cubic foot of air sampled were aerosolized during blending operations. More than 98% of these particles were less than 5 μ in size. In contrast, 80% of the viable particles aerosolized by handling lyophilized cultures were larger than 5 μ. Harvesting infected eggs, sonic treatment, centrifugation, mixing cultures, and dropping infectious material produced aerosols composed primarily of particles in the 1.0- to 7.5-μ size range. Images Fig. 1 PMID:4877498

  8. Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 2. General Practices.

    PubMed

    Mazur, Steven; Holbrook, Michael R; Burdette, Tracey; Joselyn, Nicole; Barr, Jason; Pusl, Daniela; Bollinger, Laura; Coe, Linda; Jahrling, Peter B; Lackemeyer, Matthew G; Wada, Jiro; Kuhn, Jens H; Janosko, Krisztina

    2016-10-03

    Work in a biosafety level 4 (BSL-4) containment laboratory requires time and great attention to detail. The same work that is done in a BSL-2 laboratory with non-high-consequence pathogens will take significantly longer in a BSL-4 setting. This increased time requirement is due to a multitude of factors that are aimed at protecting the researcher from laboratory-acquired infections, the work environment from potential contamination and the local community from possible release of high-consequence pathogens. Inside the laboratory, movement is restricted due to air hoses attached to the mandatory full-body safety suits. In addition, disinfection of every item that is removed from Class II biosafety cabinets (BSCs) is required. Laboratory specialists must be trained in the practices of the BSL-4 laboratory and must show high proficiency in the skills they are performing. The focus of this article is to outline proper procedures and techniques to ensure laboratory biosafety and experimental accuracy using a standard viral plaque assay as an example procedure. In particular, proper techniques to work safely in a BSL-4 environment when performing an experiment will be visually emphasized. These techniques include: setting up a Class II BSC for experiments, proper cleaning of the Class II BSC when finished working, waste management and safe disposal of waste generated inside a BSL-4 laboratory, and the removal of inactivated samples from inside a BSL-4 laboratory to the BSL-2 laboratory.

  9. Procedures and Policies Manual

    ERIC Educational Resources Information Center

    Davis, Jane M.

    2006-01-01

    This document was developed by the Middle Tennessee State University James E. Walker Library Collection Management Department to provide policies and procedural guidelines for the cataloging and processing of bibliographic materials. This document includes policies for cataloging monographs, serials, government documents, machine-readable data…

  10. WIPP waste characterization program sampling and analysis guidance manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-01-01

    The Waste Isolation Pilot Plant (WIPP) Waste Characterization Program Sampling and Analysis Guidance Manual (Guidance Manual) provides a unified source of information on the sampling and analytical techniques that enable Department of Energy (DOE) facilities to comply with the requirements established in the current revision of the Quality Assurance Program Plan (QAPP) for the WIPP Experimental-Waste Characterization Program (the Program). This Guidance Manual includes all of the sampling and testing methodologies accepted by the WIPP Project Office (DOE/WPO) for use in implementing the Program requirements specified in the QAPP. This includes methods for characterizing representative samples of transuranic (TRU) wastesmore » at DOE generator sites with respect to the gas generation controlling variables defined in the WIPP bin-scale and alcove test plans, as well as waste container headspace gas sampling and analytical procedures to support waste characterization requirements under the WIPP test program and the Resource Conservation and Recovery Act (RCRA). The procedures in this Guidance Manual are comprehensive and detailed and are designed to provide the necessary guidance for the preparation of site specific procedures. The use of these procedures is intended to provide the necessary sensitivity, specificity, precision, and comparability of analyses and test results. The solutions to achieving specific program objectives will depend upon facility constraints, compliance with DOE Orders and DOE facilities' operating contractor requirements, and the knowledge and experience of the TRU waste handlers and analysts. With some analytical methods, such as gas chromatography/mass spectrometry, the Guidance Manual procedures may be used directly. With other methods, such as nondestructive/destructive characterization, the Guidance Manual provides guidance rather than a step-by-step procedure.« less

  11. Analysis of multiple activity manual materials handling tasks using A Guide to Manual Materials Handling.

    PubMed

    Mital, A

    1999-01-01

    Manual handling of materials continues to be a hazardous activity, leading to a very significant number of severe overexertion injuries. Designing jobs that are within the physical capabilities of workers is one approach ergonomists have adopted to redress this problem. As a result, several job design procedures have been developed over the years. However, these procedures are limited to designing or evaluating only pure lifting jobs or only the lifting aspect of a materials handling job. This paper describes a general procedure that may be used to design or analyse materials handling jobs that involve several different kinds of activities (e.g. lifting, lowering, carrying, pushing, etc). The job design/analysis procedure utilizes an elemental approach (breaking the job into elements) and relies on databases provided in A Guide to Manual Materials Handling to compute associated risk factors. The use of the procedure is demonstrated with the help of two case studies.

  12. Snowpack ground-truth manual

    NASA Technical Reports Server (NTRS)

    Jones, E. B.

    1983-01-01

    As remote sensing increasingly becomes more of an operational tool in the field of snow management and snow hydrology, there is need for some degree of standardization of ""snowpack ground truth'' techniques. This manual provides a first step in standardizing these procedures and was prepared to meet the needs of remote sensing researchers in planning missions requiring ground truth as well as those providing the ground truth. Focus is on ground truth for remote sensors primarily operating in the microwave portion of the electromagnetic spectrum; nevertheless, the manual should be of value to other types of sensor programs. This first edition of ground truth procedures must be updated as new or modified techniques are developed.

  13. Case Resolution Manual

    EPA Pesticide Factsheets

    This Case Resolution Manual (CRM) is intended to provide procedural guidance to ECRCO case managers to ensure EPA’s prompt, effective, and efficient resolution of civil rights cases consistent with science and the civil rights laws.

  14. Computer-Aided Drafting and Design Series. Educational Resources for the Machine Tool Industry, Course Syllabi, [and] Instructor's Handbook. Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment in computer-aided drafting and design in the machine tool industry. The program was developed through a modification of the DACUM (Developing a Curriculum)…

  15. Flexible pavement rehabilitation manual. Rev., June 2001

    DOT National Transportation Integrated Search

    2001-06-01

    This manual delineates the basic design strategies of the 1979 "Asphalt Concrete Overlay Design Manual" plus the many changes in procedures, and incorporates the use of new strategies and materials presently being used by Caltrans. Environmental conc...

  16. 49 CFR 195.402 - Procedural manual for operations, maintenance, and emergencies.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... necessary to insure that the manual is effective. This manual shall be prepared before initial operations of... reporting accidents under subpart B of this part in a timely and effective manner. (3) Operating... fire, police, and other appropriate public officials to learn the responsibility and resources of each...

  17. Equipment Management Manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA Equipment Management Manual (NHB 4200.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958, as amended (42 USC 2473), and sets forth policy, uniform performance standards, and procedural guidance to NASA personnel for the acquisition, management, and use of NASA-owned equipment. This revision is effective upon receipt. This is a controlled manual, issued in loose-leaf form, and revised through page changes. Additional copies for internal use may be obtained through normal distribution.

  18. Diffusion Activities in College Laboratory Manuals

    ERIC Educational Resources Information Center

    Tweedy, Maryanne E.; Hoese, William J.

    2005-01-01

    Many have called for reform of the science curriculum to incorporate the process of inquiry: this has been shown to improve student understanding of biological concepts. Laboratory activities provide excellent opportunities to incorporate inquiry in to the curriculum. This study used a modified version of the Laboratory Task Analysis Instrument…

  19. Manual for Recognizing Sex Bias in Instructional Materials and Administrative Procedures.

    ERIC Educational Resources Information Center

    Smith, Laveta Johnson, Ed.

    This manual was prepared for school administrators and staff in Illinois school districts. Following a statement of the rationale for preparing the manual, a section on discriminatory legislation discusses Title IX of the Education Amendments of 1972 and Public Law 19-597 of Illinois. The next section discusses sex role stereotyping in classroom…

  20. The Saturday School: An Installation Manual.

    ERIC Educational Resources Information Center

    Parrish, Valinda E.; Wilson, Winston T.

    This manual describes the mechanics and major features of a Saturday school project for 40 Negro preschool children implemented by the South Central Region Educational Laboratory in the 1968-69 school year in Caddo Parish, Louisiana. The manual has two goals: (1) to inform the reader about how the project was successfully implemented, and (2) to…

  1. Biosafety Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may causemore » disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.« less

  2. California School Accounting Manual. 1980 Edition.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento.

    The first California school accounting manual for use by the school districts and officers of the county superintendents of schools was published in 1939. Since then many revisions have taken place. The accounting procedures outlined in this publication have been approved as the official manual for California public school accounting. The…

  3. Toms River Drivers Manual 1984-1985.

    ERIC Educational Resources Information Center

    Thomas, Patricia

    The procedures in this manual are designed to establish stability and continuity within the student transportation department of the Toms River Regional Schools in New Jersey. The manual is divided into three sections. Section 1 provides driver and aide specific information. It includes directives related to time clock, spare buses, and…

  4. Illinois Community College Board Uniform Accounting Procedures Manual.

    ERIC Educational Resources Information Center

    Illinois Community Coll. Board, Springfield.

    This manual was designed to provide chief finance officers and other administrators with a summary of laws and policies that relate to Illinois public community colleges and to provide a uniform system for accounting, budgeting, auditing, and reporting in the state's community colleges. After chapter I describes the fiscal philosophies and…

  5. Manpower Information Manual. A Manual for Local Planning.

    ERIC Educational Resources Information Center

    Allred, Marcus D.; Myers, Christine F.

    The step-by-step procedures contained in this manual are intended to develop a simple information system that can be used to collect and process the best possible factual data on the manpower needs of the community served by an educational institution, so that long-range planning of vocational curriculum and guidance can be based on what the jobs…

  6. 42 CFR 401.112 - Availability of administrative staff manuals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 2 2014-10-01 2014-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...

  7. 42 CFR 401.112 - Availability of administrative staff manuals.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 2 2013-10-01 2013-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...

  8. 42 CFR 401.112 - Availability of administrative staff manuals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 2 2011-10-01 2011-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...

  9. 42 CFR 401.112 - Availability of administrative staff manuals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...

  10. 42 CFR 401.112 - Availability of administrative staff manuals.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 2 2012-10-01 2012-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...

  11. Japanese Society for Laboratory Hematology flow cytometric reference method of determining the differential leukocyte count: external quality assurance using fresh blood samples.

    PubMed

    Kawai, Y; Nagai, Y; Ogawa, E; Kondo, H

    2017-04-01

    To provide target values for the manufacturers' survey of the Japanese Society for Laboratory Hematology (JSLH), accurate standard data from healthy volunteers were needed for the five-part differential leukocyte count. To obtain such data, JSLH required an antibody panel that achieved high specificity (particularly for mononuclear cells) using simple gating procedures. We developed a flow cytometric method for determining the differential leukocyte count (JSLH-Diff) and validated it by comparison with the flow cytometric differential leukocyte count of the International Council for Standardization in Haematology (ICSH-Diff) and the manual differential count obtained by microscopy (Manual-Diff). First, the reference laboratory performed an imprecision study of JSLH-Diff and ICSH-Diff, as well as performing comparison among JSLH-Diff, Manual-Diff, and ICSH-Diff. Then two reference laboratories and seven participating laboratories performed imprecision and accuracy studies of JSLH-Diff, Manual-Diff, and ICSH-Diff. Simultaneously, six manufacturers' laboratories provided their own representative values by using automated hematology analyzers. The precision of both JSLH-Diff and ICSH-Diff methods was adequate. Comparison by the reference laboratory showed that all correlation coefficients, slopes and intercepts obtained by the JSLH-Diff, ICSH-Diff, and Manual-Diff methods conformed to the criteria. When the imprecision and accuracy of JSLH-Diff were assessed at seven laboratories, the CV% for lymphocytes, neutrophils, monocytes, eosinophils, and basophils was 0.5~0.9%, 0.3~0.7%, 1.7~2.6%, 3.0~7.9%, and 3.8~10.4%, respectively. More than 99% of CD45 positive leukocytes were identified as normal leukocytes by JSLH-Diff. When JSLH-Diff method were validated by comparison with Manual-Diff and ICSH-Diff, JSLH-Diff showed good performance as a reference method. © 2016 John Wiley & Sons Ltd.

  12. Health Services Manual. Hicksville Public Schools.

    ERIC Educational Resources Information Center

    1987

    This procedure manual describes the uniform procedures used by the Hicksville, New York School District's Health Services Program. Its objectives are to establish a uniform set of health services guidelines and procedures, to update all health forms, to maintain an awareness of the current changes in health laws that govern school districts, and…

  13. Medical practice, procedure manuals and the standardisation of hospital death.

    PubMed

    Hadders, Hans

    2009-03-01

    This paper examines how death is managed in a larger regional hospital within the Norwegian health-care. The central focus of my paper concerns variations in how healthcare personnel enact death and handle the dead patient. Over several decades, modern standardised hospital death has come under critique in the western world. Such critique has resulted in changes in the standardisation of hospital deaths within Norwegian health-care. In the wake of the hospice movement and with greater focus on palliative care, doors have gradually been opened and relatives of the deceased are now more often invited to participate. I explore how the medical practice around death along with the procedure manual of post-mortem care at Trondheim University Hospital has changed. I argue that in the late-modern context, standardisation of hospital death is a multidimensional affair, embedded in a far more comprehensive framework than the depersonalized medico-legal. In the late-modern Norwegian hospital, interdisciplinary negotiation and co-operation has allowed a number of different agendas to co-exist, without any ensuing loss of the medical power holder's authority to broker death. I follow Mol's notion of praxiographic orientation of the actor-network approach while exploring this medical practice.

  14. NHEXAS PHASE I REGION 5 STUDY--STANDARD OPERATING PROCEDURE FOR PROPER USE AND MAINTENANCE OF LABORATORY NOTEBOOKS (NHX/SOP-120-001)

    EPA Science Inventory

    This procedure describes in detail the rules and regulations governing the proper use and maintenance of laboratory notebooks. The purpose of laboratory notebooks was to provide a permanent legal record of experimental procedures and results. Thus, the laboratory notebook served ...

  15. 14 CFR 23.1585 - Operating procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Operating procedures. 23.1585 Section 23.1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Information Airplane Flight Manual and Approved Manual Material § 23.1585 Operating procedures. (a) For all...

  16. Administrative Procedures for Small Institutions. Second Edition.

    ERIC Educational Resources Information Center

    Mathews, Keith W., Ed.

    This guide offers sample administrative procedures and policies that can be used by small colleges and universities to prepare or revise administrative procedures manuals. The sample procedures and policies offered here have been compiled from a review of many manuals from many different institutions, and vary from the general to the specific.…

  17. [Manual-medical differential diagnosis of low back pain including osteopathic procedures].

    PubMed

    Buchmann, J; Arens, U; Harke, G; Smolenski, U C; Kayser, R

    2012-06-01

    The differential diagnostic evaluation of painful functional disorders of the lumbosacral and lumbopelvic region, i. e. the so-called “low back pain” is very extensive, but is often reduced to the question of chronicity. The manual medical diagnosis can make a valuable contribution in such cases for determination of structural and functional pathology. Early application of manual medical therapies seems to be effective for peracute complaints. The mobilization of restrictions of the pelvic visceral attachments should be included. In the following review manual medical syndromes are presented that summarize the findings from the musculoskeletal and visceral system. This is intended to facilitate the primary differential diagnostic evaluation, as well as treatment planning. The combination with osteopathic methods is very profitable. A necessary specialist differential diagnosis remains essential.

  18. Manual sorting to eliminate aflatoxin from peanuts.

    PubMed

    Galvez, F C F; Francisco, M L D L; Villarino, B J; Lustre, A O; Resurreccion, A V A

    2003-10-01

    A manual sorting procedure was developed to eliminate aflatoxin contamination from peanuts. The efficiency of the sorting process in eliminating aflatoxin-contaminated kernels from lots of raw peanuts was verified. The blanching of 20 kg of peanuts at 140 degrees C for 25 min in preheated roasters facilitated the manual sorting of aflatoxin-contaminated kernels after deskinning. The manual sorting of raw materials with initially high aflatoxin contents (300 ppb) resulted in aflatoxin-free peanuts (i.e., peanuts in which no aflatoxin was detected). Verification procedures showed that the sorted sound peanuts contained no aflatoxin or contained low levels (<15 ppb) of aflatoxin. The results obtained confirmed that the sorting process was effective in separating contaminated peanuts whether or nor contamination was extensive. At the commercial level, when roasters were not preheated, the dry blanching of 50 kg of peanuts for 45 to 55 min facilitated the proper deskinning and subsequent manual sorting of aflatoxin-contaminated peanut kernels from sound kernels.

  19. 14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft not type certificated with an Airplane or Rotorcraft Flight Manual and...

  20. 14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft not type certificated with an Airplane or Rotorcraft Flight Manual and...

  1. 14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft not type certificated with an Airplane or Rotorcraft Flight Manual and...

  2. Data collection system. Volume 1, Overview and operators manual; Volume 2, Maintenance manual; Appendices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Caudell, R.B.; Bauder, M.E.; Boyer, W.B.

    1993-09-01

    Sandia National Laboratories (SNL) Instrumentation Development Department was tasked by the Defense Nuclear Agency (DNA) to record data on Tektronix RTD720 Digitizers on the HUNTERS TROPHY field test conducted at the Nevada Test Site (NTS) on September 18, 1992. This report contains a overview and description of the computer hardware and software that was used to acquire, reduce, and display the data. The document is divided into two volumes: an overview and operators manual (Volume 1) and a maintenance manual (Volume 2).

  3. Downtime procedures for the 21st century: using a fully integrated health record for uninterrupted electronic reporting of laboratory results during laboratory information system downtimes.

    PubMed

    Oral, Bulent; Cullen, Regina M; Diaz, Danny L; Hod, Eldad A; Kratz, Alexander

    2015-01-01

    Downtimes of the laboratory information system (LIS) or its interface to the electronic medical record (EMR) disrupt the reporting of laboratory results. Traditionally, laboratories have relied on paper-based or phone-based reporting methods during these events. We developed a novel downtime procedure that combines advance placement of orders by clinicians for planned downtimes, the printing of laboratory results from instruments, and scanning of the instrument printouts into our EMR. The new procedure allows the analysis of samples from planned phlebotomies with no delays, even during LIS downtimes. It also enables the electronic reporting of all clinically urgent results during downtimes, including intensive care and emergency department samples, thereby largely avoiding paper- and phone-based communication of laboratory results. With the capabilities of EMRs and LISs rapidly evolving, information technology (IT) teams, laboratories, and clinicians need to collaborate closely, review their systems' capabilities, and design innovative ways to apply all available IT functions to optimize patient care during downtimes. Copyright© by the American Society for Clinical Pathology.

  4. Caltrans : highway design manual

    DOT National Transportation Integrated Search

    2008-07-01

    The Highway Design Manual establishes uniform policies and procedures to carry out the highway design functions of the California Department of Transportation (Caltrans). The policies established herein are for the information and guidance of the off...

  5. Hunter Education: Instructor Manual. Shooting Skills Series.

    ERIC Educational Resources Information Center

    Diebold, Louis, Comp.; And Others

    Composed of three books (a procedures guide, the basic student manual, and lesson plans), the instructor's manual provides information to set up and conduct a Hunter Education Certification Course. Course topics include: an introduction, firearms and ammunition, hunting tradition and ethics, the hunter and conservation, safe firearms handling,…

  6. 46 CFR 159.007-3 - Production inspections and tests: Independent laboratory's procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Production inspections and tests: Independent laboratory's procedures. 159.007-3 Section 159.007-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL APPROVAL OF EQUIPMENT AND MATERIALS Production Inspection and Tests of...

  7. 46 CFR 159.007-3 - Production inspections and tests: Independent laboratory's procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Production inspections and tests: Independent laboratory's procedures. 159.007-3 Section 159.007-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL APPROVAL OF EQUIPMENT AND MATERIALS Production Inspection and Tests of...

  8. 42 CFR 414.506 - Procedures for public consultation for payment for a new clinical diagnostic laboratory test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... a new clinical diagnostic laboratory test. 414.506 Section 414.506 Public Health CENTERS FOR... FOR PART B MEDICAL AND OTHER HEALTH SERVICES Payment for New Clinical Diagnostic Laboratory Tests § 414.506 Procedures for public consultation for payment for a new clinical diagnostic laboratory test...

  9. 42 CFR 414.506 - Procedures for public consultation for payment for a new clinical diagnostic laboratory test.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... a new clinical diagnostic laboratory test. 414.506 Section 414.506 Public Health CENTERS FOR... FOR PART B MEDICAL AND OTHER HEALTH SERVICES Payment for New Clinical Diagnostic Laboratory Tests § 414.506 Procedures for public consultation for payment for a new clinical diagnostic laboratory test...

  10. 14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft that was not type certificated with an Airplane or Rotorcraft Flight Manual...

  11. Quartermaster 1 and C, Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Personnel Program Support Activity, Washington, DC.

    The technical subject matter of the Quartermaster rating is presented in this training manual written to prepare men of the Navy and Naval Reserve for advancement examinations. The manual includes eleven chapters. Discussed are commonly used methods and procedures of operating magnetic compasses and gyrocompasses, determining a ship's position,…

  12. A Procedure for Structural Weight Estimation of Single Stage to Orbit Launch Vehicles (Interim User's Manual)

    NASA Technical Reports Server (NTRS)

    Martinovic, Zoran N.; Cerro, Jeffrey A.

    2002-01-01

    This is an interim user's manual for current procedures used in the Vehicle Analysis Branch at NASA Langley Research Center, Hampton, Virginia, for launch vehicle structural subsystem weight estimation based on finite element modeling and structural analysis. The process is intended to complement traditional methods of conceptual and early preliminary structural design such as the application of empirical weight estimation or application of classical engineering design equations and criteria on one dimensional "line" models. Functions of two commercially available software codes are coupled together. Vehicle modeling and analysis are done using SDRC/I-DEAS, and structural sizing is performed with the Collier Research Corp. HyperSizer program.

  13. Simulated Exercise Physiology Laboratories.

    ERIC Educational Resources Information Center

    Morrow, James R., Jr.; Pivarnik, James M.

    This book consists of a lab manual and computer disks for either Apple or IBM hardware. The lab manual serves as "tour guide" for the learner going through the various lab experiences. The manual contains definitions, proper terminology, and other basic information about physiological principles. It is organized so a step-by-step procedure may be…

  14. Aircraft noise prediction program user's manual

    NASA Technical Reports Server (NTRS)

    Gillian, R. E.

    1982-01-01

    The Aircraft Noise Prediction Program (ANOPP) predicts aircraft noise with the best methods available. This manual is designed to give the user an understanding of the capabilities of ANOPP and to show how to formulate problems and obtain solutions by using these capabilities. Sections within the manual document basic ANOPP concepts, ANOPP usage, ANOPP functional modules, ANOPP control statement procedure library, and ANOPP permanent data base. appendixes to the manual include information on preparing job decks for the operating systems in use, error diagnostics and recovery techniques, and a glossary of ANOPP terms.

  15. Procedure for contact electrical resistance measurements as developed for use at Sandia National Laboratories

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Finch, J.L.

    1994-06-01

    Military Specifications call out general procedures and guidelines for conducting contact resistance measurements on chemical conversion coated panels. This paper deals with a test procedure developed at Sandia National Laboratories used to conduct contact electrical resistance on non-chromated conversion coated test panels. MIL-C-81706 {open_quotes}Chemical Conversion Materials For Coating Aluminum and Aluminum Alloys{close_quotes} was the reference specification used for guidance.

  16. Medical Service Clinical Laboratory Procedures--Parasitology.

    ERIC Educational Resources Information Center

    Department of the Army, Washington, DC.

    This manual presents techniques for the collection and examination of specimens in the diagnosis of parasitic disease and in field surveys conducted to determine the extent of parasitic infections in human and animal populations. It discusses areas in which parasites are most likely to be found and the relationships of parasites, vectors, and…

  17. Skylab Saturn 1B flight manual

    NASA Technical Reports Server (NTRS)

    1972-01-01

    A Saturn 1B Flight Manual provides launch vehicle systems descriptions and predicted performance data for the Skylab missions. Vehicle SL-2 (SA-206) is the baseline for this manual; but, as a result of the great similarity, the material is representative of SL-3 and SL-4 launch vehicles, also. The Flight Manual is not a control document but is intended primarily as an aid to astronauts who are training for Skylab missions. In order to provide a comprehensive reference for that purpose, the manual also contains descriptions of the ground support interfaces, prelaunch operations, and emergency procedures. Mission variables and constraints are summarized, and mission control monitoring and data flow during launch preparation and flight are discussed.

  18. MANUAL OF PROCEDURES AND CRITERIA FOR CAMPUS DEVELOPMENT AND CAPITAL OUTLAY PLANNING.

    ERIC Educational Resources Information Center

    HELDMAN, HERBERT; MASON, THOMAS R.

    THE PURPOSE OF THIS MANUAL IS TO PROVIDE A BASIS FOR SYSTEMATICALLY PROGRAMMING THE REQUIREMENTS FOR PHYSICAL PLANT AND LAND TO ACCOMMODATE THE NEEDS OF AN INSTITUTION UNDER A SPECIFIED SET OF CIRCUMSTANCES. THE MANUAL IS ORGANIZED INTO SIX BROAD ELEMENTS--(1) ACTIVITY LEVELS OF ENROLLMENT, INSTRUCTIONAL WORKLOADS AND STAFF REQUIREMENTS, (2)…

  19. Livestock Nutrition and Feeding. Student Manual. Second Edition.

    ERIC Educational Resources Information Center

    Ridenour, Harlan E.

    This manual is designed to help agricultural education students and teachers to apply scientific facts and principles to problem-solving procedures in determining nutritious and economical livestock feeding programs. The manual provides applied scientific activities in biological science and chemistry, mathematics, and communication skills. It…

  20. Book Repair Manual.

    ERIC Educational Resources Information Center

    Milevski, Robert J.

    1995-01-01

    This book repair manual developed for the Illinois Cooperative Conservation Program includes book structure and book problems, book repair procedures for 4 specific problems, a description of adhesive bindings, a glossary, an annotated list of 11 additional readings, book repair supplies and suppliers, and specifications for book repair kits. (LRW)

  1. The comparison of automated urine analyzers with manual microscopic examination for urinalysis automated urine analyzers and manual urinalysis.

    PubMed

    İnce, Fatma Demet; Ellidağ, Hamit Yaşar; Koseoğlu, Mehmet; Şimşek, Neşe; Yalçın, Hülya; Zengin, Mustafa Osman

    2016-08-01

    Urinalysis is one of the most commonly performed tests in the clinical laboratory. However, manual microscopic sediment examination is labor-intensive, time-consuming, and lacks standardization in high-volume laboratories. In this study, the concordance of analyses between manual microscopic examination and two different automatic urine sediment analyzers has been evaluated. 209 urine samples were analyzed by the Iris iQ200 ELITE (İris Diagnostics, USA), Dirui FUS-200 (DIRUI Industrial Co., China) automatic urine sediment analyzers and by manual microscopic examination. The degree of concordance (Kappa coefficient) and the rates within the same grading were evaluated. For erythrocytes, leukocytes, epithelial cells, bacteria, crystals and yeasts, the degree of concordance between the two instruments was better than the degree of concordance between the manual microscopic method and the individual devices. There was no concordance between all methods for casts. The results from the automated analyzers for erythrocytes, leukocytes and epithelial cells were similar to the result of microscopic examination. However, in order to avoid any error or uncertainty, some images (particularly: dysmorphic cells, bacteria, yeasts, casts and crystals) have to be analyzed by manual microscopic examination by trained staff. Therefore, the software programs which are used in automatic urine sediment analysers need further development to recognize urinary shaped elements more accurately. Automated systems are important in terms of time saving and standardization.

  2. Interlibrary Loan Communications Subsystem: Users Manual.

    ERIC Educational Resources Information Center

    OCLC Online Computer Library Center, Inc., Dublin, OH.

    The OCLC Interlibrary Loan (ILL) Communications Subsystem provides participating libraries with on-line control of ILL transactions. This user manual includes a glossary of terms related to the procedures in using the system. Sections describe computer entry, searching, loan request form, loan response form, ILL procedures, the special message…

  3. Development of FWD procedures manual.

    DOT National Transportation Integrated Search

    2010-04-01

    In this project, the state-of-practice in FWD testing and analysis procedures were examined : by looking at the standard protocols of a number of other highway agencies. The specific : needs of NJDOT were also examined and a protocol was developed th...

  4. Colorado Outward Bound School River Rafters' Manual.

    ERIC Educational Resources Information Center

    Leachman, Mark

    Instructional sequences, safety rules, duties of crew members, and procedures for Colorado Outward Bound School river rafting trips are summarized in this manual. Designed to acquaint instructors with the duties expected of them on the trips, the information in the manual is presented in outline form and is intended for those with prior river…

  5. Long Term Resource Monitoring Program procedures: fish monitoring

    USGS Publications Warehouse

    Ratcliff, Eric N.; Glittinger, Eric J.; O'Hara, T. Matt; Ickes, Brian S.

    2014-01-01

    This manual constitutes the second revision of the U.S. Army Corps of Engineers’ Upper Mississippi River Restoration-Environmental Management Program (UMRR-EMP) Long Term Resource Monitoring Program (LTRMP) element Fish Procedures Manual. The original (1988) manual merged and expanded on ideas and recommendations related to Upper Mississippi River fish sampling presented in several early documents. The first revision to the manual was made in 1995 reflecting important protocol changes, such as the adoption of a stratified random sampling design. The 1995 procedures manual has been an important document through the years and has been cited in many reports and scientific manuscripts. The resulting data collected by the LTRMP fish component represent the largest dataset on fish within the Upper Mississippi River System (UMRS) with more than 44,000 collections of approximately 5.7 million fish. The goal of this revision of the procedures manual is to document changes in LTRMP fish sampling procedures since 1995. Refinements to sampling methods become necessary as monitoring programs mature. Possible refinements are identified through field experiences (e.g., sampling techniques and safety protocols), data analysis (e.g., planned and studied gear efficiencies and reallocations of effort), and technological advances (e.g., electronic data entry). Other changes may be required because of financial necessity (i.e., unplanned effort reductions). This version of the LTRMP fish monitoring manual describes the most current (2014) procedures of the LTRMP fish component.

  6. Effect of raw materials and hardening process on hardness of manually forged knife

    NASA Astrophysics Data System (ADS)

    Balkhaya, Suwarno

    2017-06-01

    Knives are normally made by forging process either using a machine or traditional method by means of hammering process. This present work was conducted to study the effects of steel raw materials and hardening process on the hardness of manually forged knives. The knife samples were made by traditional hammering (forging) process done by local blacksmith. Afterward, the samples were heat treated with two different hardening procedures, the first was based on the blacksmith procedure and the second was systematically done at the laboratory. The forging was done in the temperature ranged between 900-950°C, while the final temperature ranged between 650-675°C. The results showed that knives made of spring steel and heat treated in simulated condition at the laboratory obtained higher level of hardness, i.e. 62 HRC. In general, knives heat treated by local blacksmith had lower level of hardness that those obtained from simulated condition. Therefore, we concluded that the traditional knife quality in term of hardness can be improved by optimizing the heat treatment schedule.

  7. XYFREZ.4 User’s Manual.

    DTIC Science & Technology

    1987-12-01

    F T FILE I MEuSpecial Report 87-26 December 1987 US Army Corps of Engineers Cold Regions Research & Engineering Laboratory XYFREZ.4 User’s manual...Freeze/thaw User’s manual 19. ABSTRACT (Continue on reverse if necessary and identify by block number) - -- Using the program XYFREZ, version 4, one...may simulate two-dimensional conduction of heat, with or without phase change. The mathematical method employed uses finite elements in space and

  8. The "hospital central laboratory": automation, integration and clinical usefulness.

    PubMed

    Zaninotto, Martina; Plebani, Mario

    2010-07-01

    Recent technological developments in laboratory medicine have led to a major challenge, maintaining a close connection between the search of efficiency through automation and consolidation and the assurance of effectiveness. The adoption of systems that automate most of the manual tasks characterizing routine activities has significantly improved the quality of laboratory performance; total laboratory automation being the paradigm of the idea that "human-less" robotic laboratories may allow for better operation and insuring less human errors. Furthermore, even if ongoing technological developments have considerably improved the productivity of clinical laboratories as well as reducing the turnaround time of the entire process, the value of qualified personnel remains a significant issue. Recent evidence confirms that automation allows clinical laboratories to improve analytical performances only if trained staff operate in accordance with well-defined standard operative procedures, thus assuring continuous monitoring of the analytical quality. In addition, laboratory automation may improve the appropriateness of test requests through the use of algorithms and reflex testing. This should allow the adoption of clinical and biochemical guidelines. In conclusion, in laboratory medicine, technology represents a tool for improving clinical effectiveness and patient outcomes, but it has to be managed by qualified laboratory professionals.

  9. 14 CFR 91.1023 - Program operating manual requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... manager must prepare and keep current a program operating manual setting forth procedures and policies acceptable to the Administrator. The program manager's management, flight, ground, and maintenance personnel... personnel. (b) Each program manager must maintain at least one copy of the manual at its principal base of...

  10. Petrographic methods of examining hardened concrete : a petrographic manual.

    DOT National Transportation Integrated Search

    1997-11-01

    This manual was undertaken to record for all persons wishing to do concrete : petrography the petrographic procedures that have been found useful at the : Virginia Transportation Research Council. The manual is made up of an : introduction and chapte...

  11. National Economic Development Procedures Manual - Urban Flood Damage. Volume 2: Primer for Surveying Flood Damage for Residential Structures and Contents

    DTIC Science & Technology

    1991-10-01

    procedures and techniques to measure flood damage and to further implement the Principles and Guidelines of the U.S. Water Resources Council. This manual... guidelines for using the OMB approved questionnaires are provided in Engineer Regulation 1105-2-100. The compendium provides the analyst with a helpful...question content, the analyst must also comply with OMB guidelines concerning implementation of the Privacy Act of 1974 (P.L. 93-579). This Act requires

  12. SNL Abuse Testing Manual.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Orendorff, Christopher; Lamb, Joshua; Steele, Leigh Anna Marie

    This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the FreedomCAR Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND2005-3123).

  13. Verification of examination procedures in clinical laboratory for imprecision, trueness and diagnostic accuracy according to ISO 15189:2012: a pragmatic approach.

    PubMed

    Antonelli, Giorgia; Padoan, Andrea; Aita, Ada; Sciacovelli, Laura; Plebani, Mario

    2017-08-28

    Background The International Standard ISO 15189 is recognized as a valuable guide in ensuring high quality clinical laboratory services and promoting the harmonization of accreditation programmes in laboratory medicine. Examination procedures must be verified in order to guarantee that their performance characteristics are congruent with the intended scope of the test. The aim of the present study was to propose a practice model for implementing procedures employed for the verification of validated examination procedures already used for at least 2 years in our laboratory, in agreement with the ISO 15189 requirement at the Section 5.5.1.2. Methods In order to identify the operative procedure to be used, approved documents were identified, together with the definition of performance characteristics to be evaluated for the different methods; the examination procedures used in laboratory were analyzed and checked for performance specifications reported by manufacturers. Then, operative flow charts were identified to compare the laboratory performance characteristics with those declared by manufacturers. Results The choice of performance characteristics for verification was based on approved documents used as guidance, and the specific purpose tests undertaken, a consideration being made of: imprecision and trueness for quantitative methods; diagnostic accuracy for qualitative methods; imprecision together with diagnostic accuracy for semi-quantitative methods. Conclusions The described approach, balancing technological possibilities, risks and costs and assuring the compliance of the fundamental component of result accuracy, appears promising as an easily applicable and flexible procedure helping laboratories to comply with the ISO 15189 requirements.

  14. WisDOT geotechnical manual development.

    DOT National Transportation Integrated Search

    2015-02-01

    The Wisconsin Department of Transportation currently has a Soils Manual and a Geotechnical Bulletin that provides some guidance : to Regional staff and consulting engineering firms on departmental policy and procedures. However, these two publication...

  15. Simplified Procedures for Eutrophication Assessment and Prediction: User Manual

    DTIC Science & Technology

    1996-09-01

    1975), for use in the Lake Erie Wastewater Management Study and is described by Verhoff, Yaksich, and Melfi (1980) and Westerdahl et al. (1981). This...manual," Technical Re- port E-81-9, U.S. Army Engineer Waterways Experiment Station, Vicksburg, MS. Westerdahl , H. E., Ford, W. B., Harris, J., and

  16. Battery Calendar Life Estimator Manual Modeling and Simulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jon P. Christophersen; Ira Bloom; Ed Thomas

    2012-10-01

    The Battery Life Estimator (BLE) Manual has been prepared to assist developers in their efforts to estimate the calendar life of advanced batteries for automotive applications. Testing requirements and procedures are defined by the various manuals previously published under the United States Advanced Battery Consortium (USABC). The purpose of this manual is to describe and standardize a method for estimating calendar life based on statistical models and degradation data acquired from typical USABC battery testing.

  17. Battery Life Estimator Manual Linear Modeling and Simulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jon P. Christophersen; Ira Bloom; Ed Thomas

    2009-08-01

    The Battery Life Estimator (BLE) Manual has been prepared to assist developers in their efforts to estimate the calendar life of advanced batteries for automotive applications. Testing requirements and procedures are defined by the various manuals previously published under the United States Advanced Battery Consortium (USABC). The purpose of this manual is to describe and standardize a method for estimating calendar life based on statistical models and degradation data acquired from typical USABC battery testing.

  18. Short Haul Civil Tiltrotor Study in MIDAS: Auto versus Manual Nacelle Procedures for Commanded Go-Around

    NASA Technical Reports Server (NTRS)

    Atencio, Adolph, Jr.; Banda, Carolyn

    1998-01-01

    Tiltrotor aircraft combine the speed and range of a turboprop performance with the ability to take off and land in a vertical mode like a helicopter. These aircraft will transport passengers from city center to city center and from satellite airports to major hub airports to make connections to long range travel. The Short Haul Civil Tiltrotor (SH(CT)) being studied by NASA is a concept 40 passenger civil tiltrotor (CTR) transport. The Man-machine Integration Design and Analysis System (MIDAS) was used to evaluate human performance in terms of crew procedures and pilot workload for a simulated 40 passenger Civil Tiltrotor Transport on a steep approach to a vertiport. The scenario for the simulation was a normal approach to the vertiport that is interrupted by a commanded go-around at the landing decision point. The simulation contrasted an automated discrete nacelle mode control with a fully manual nacelle control mode for the go-around. The MIDAS simulation showed that the pilot task loading during approach and for the commanded go-around is high and that pilot workload is near capacity throughout. The go-around in manual nacelle mode was most demanding, resulting in additional time requirements to complete necessary tasks.

  19. 9 CFR 147.30 - Laboratory procedure recommended for the polymerase chain reaction (PCR) test for Mycoplasma...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the polymerase chain reaction (PCR) test for Mycoplasma gallisepticum and M. synoviae. 147.30 Section... Examination Procedures § 147.30 Laboratory procedure recommended for the polymerase chain reaction (PCR) test... should consist of the following sequences: ER12JA07.005 (c) Polymerase chain reaction. (1) Treat each...

  20. 9 CFR 147.30 - Laboratory procedure recommended for the polymerase chain reaction (PCR) test for Mycoplasma...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the polymerase chain reaction (PCR) test for Mycoplasma gallisepticum and M. synoviae. 147.30 Section... Examination Procedures § 147.30 Laboratory procedure recommended for the polymerase chain reaction (PCR) test... should consist of the following sequences: ER12JA07.005 (c) Polymerase chain reaction. (1) Treat each...

  1. Sewer Maintenance Manual.

    ERIC Educational Resources Information Center

    Ontario Ministry of the Environment, Toronto.

    Outlined are practices and procedures that should be followed in order to protect and fully realize the benefits of sewer systems and also to maximize service and minimize inconveniences to the public. Written in practical terms, the manual is designed to be of immediate use to municipal employees and others involved in sewer maintenance…

  2. Making Basic Math Skills Work for You in Marketing. Student Manual and Laboratory Guide.

    ERIC Educational Resources Information Center

    Klewer, Edwin D.

    This student manual and workbook is the second part of a mathematics series for use with high school students. The manual is to be used to apply the mathematics skills that students have learned in a first part called "Developing Basic Math Skills for Marketing." The manual presents conceptual instruction in mathematics in a competency based…

  3. Dental Aide. Student Manual [and] Instructor Key. Revised.

    ERIC Educational Resources Information Center

    Heckman, Karen; Noirfalise, Pat

    The first component of this three-part package is a student manual designed to be used independently in secondary health occupations programs or on-the-job training programs for dental assistants. The manual contains seven units that cover the following topics: introduction to dentistry; basic office procedures; infection control and occupational…

  4. The biomechanical demands of manual scaling on the shoulders & neck of dental hygienists.

    PubMed

    La Delfa, Nicholas J; Grondin, Diane E; Cox, Jocelyn; Potvin, Jim R; Howarth, Samuel J

    2017-01-01

    The purpose of this study was to evaluate the postural and muscular demands placed on the shoulders and neck of dental hygienists when performing a simulated manual scaling task. Nineteen healthy female dental hygienists performed 30-min of simulated manual scaling on a manikin head in a laboratory setting. Surface electromyography was used to monitor muscle activity from several neck and shoulder muscles, and neck and arm elevation kinematics were evaluated using motion capture. The simulated scaling task resulted in a large range of neck and arm elevation angles and excessive low-level muscular demands in the neck extensor and scapular stabilising muscles. The physical demands varied depending on the working position of the hygienists relative to the manikin head. These findings are valuable in guiding future ergonomics interventions aimed at reducing the physical exposures of dental hygiene work. Practitioner Summary: Given that this study evaluates the physical demands of manual scaling, a procedure that is fundamental to dental hygiene work, the findings are valuable to identify ergonomics interventions to reduce the prevalence of work-related injuries, disability and the potential for early retirement among this occupational group.

  5. Marine Information Centre Development: An Introductory Manual. Manuals and Guides 23.

    ERIC Educational Resources Information Center

    Varley, Allan

    The purpose of this introductory manual is briefly to explain and put into context the elements involved in marine information center development and operation. Its goal is to provide an overview and create an awareness of the range of the inter-connected procedures, activities, and products that make up an information service. The introductory…

  6. 24 CFR 3282.207 - Manufactured home consumer manual requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...

  7. 24 CFR 3282.207 - Manufactured home consumer manual requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...

  8. 24 CFR 3282.207 - Manufactured home consumer manual requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...

  9. 24 CFR 3282.207 - Manufactured home consumer manual requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...

  10. Evaluation Manual for CIP Courses: Objectives and Implementation Procedures.

    ERIC Educational Resources Information Center

    Siri, Carmen

    This manual has been designed to guide courses on potato production sponsored by the International Potato Center (CIP) in Lima (Peru). It describes the CIP Course Evaluation System that is presently used and provides guidelines on how to use feedback more effectively for improving training. CIP evaluations are largely formative. The CIP focuses on…

  11. Disaster Preparedness Manual.

    ERIC Educational Resources Information Center

    Michael, Douglas O.

    Prepared for use by the staff of a community college library, this manual describes the natural, building, and human hazards which can result in disaster in a library and outlines a set of disaster prevention measures and salvage procedures. A list of salvage priorities, floor plans for all three levels of Bourke Memorial Library, and staff duties…

  12. Template for updating regulations in QA manuals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    White, M.G.; Banerjee, B.

    1992-01-01

    Recently, the U.S. Department of Energy (DOE) issued new quality assurance (QA) orders to reflect current policies for conduct and operation of DOE-authorized programs and facilities. Establishing traceability to new QA criteria and requirements from former multidraft orders, QA manuals, and guidance documentation for DOE-funded work can be confusing. Identified critical considerations still must be addressed. Most of the newly stated QA criteria can be cross referenced, where applicable, to former QA plans and manuals. Where additional criteria occur, new procedures may be required, together with revisions in QA plans and manuals.

  13. Student Attendance Accounting Manual.

    ERIC Educational Resources Information Center

    Freitas, Joseph M.

    In response to state legislation authorizing procedures for changes in academic calendars and measurement of student workload in California community colleges, this manual from the Chancellor's Office provides guidelines for student attendance accounting. Chapter 1 explains general items such as the academic calendar, admissions policies, student…

  14. Manual LANDSAT data analysis for crop type identification

    NASA Technical Reports Server (NTRS)

    Hay, C. M. (Principal Investigator)

    1979-01-01

    The process of manual identification of crop type by human analysts and problems associated in LACIE that were associated with manual crop identification measurement procedures are described. Research undertaken in cooperation with LACIE operations by the supporting research community to effect solutions to, or obtain greater understanding of the problems is discussed.

  15. Laboratory quality management system: road to accreditation and beyond.

    PubMed

    Wadhwa, V; Rai, S; Thukral, T; Chopra, M

    2012-01-01

    This review attempts to clarify the concepts of Laboratory Quality Management System (Lab QMS) for a medical testing and diagnostic laboratory in a holistic way and hopes to expand the horizon beyond quality control (QC) and quality assurance. It provides an insight on accreditation bodies and highlights a glimpse of existing laboratory practices but essentially it takes the reader through the journey of accreditation and during the course of reading and understanding this document, prepares the laboratory for the same. Some of the areas which have not been highlighted previously include: requirement for accreditation consultants, laboratory infrastructure and scope, applying for accreditation, document preparation. This section is well supported with practical illustrations and necessary tables and exhaustive details like preparation of a standard operating procedure and a quality manual. Concept of training and privileging of staff has been clarified and a few of the QC exercises have been dealt with in a novel way. Finally, a practical advice for facing an actual third party assessment and caution needed to prevent post-assessment pitfalls has been dealt with.

  16. 14 CFR 27.1585 - Operating procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...

  17. 14 CFR 27.1585 - Operating procedures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...

  18. 14 CFR 27.1585 - Operating procedures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...

  19. 14 CFR 27.1585 - Operating procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...

  20. Sanitary Engineering Unit Operations and Unit Processes Laboratory Manual.

    ERIC Educational Resources Information Center

    American Association of Professors in Sanitary Engineering.

    This manual contains a compilation of experiments in Physical Operations, Biological and Chemical Processes for various education and equipment levels. The experiments are designed to be flexible so that they can be adapted to fit the needs of a particular program. The main emphasis is on hands-on student experiences to promote understanding.…

  1. Assessment of Alternative Interfaces for Manual Commanding of Spacecraft Systems: Compatibility with Flexible Allocation Policies

    NASA Technical Reports Server (NTRS)

    Billman, Dorrit Owen; Schreckenghost, Debra; Miri, Pardis

    2014-01-01

    Astronauts will be responsible for executing a much larger body of procedures as human exploration moves further from Earth and Mission Control. Efficient, reliable methods for executing these procedures, including manual, automated, and mixed execution will be important. Our interface integrates step-by-step instruction with the means for execution. The research reported here compared manual execution using the new system to a system analogous to the manual-only system currently in use on the International Space Station, to assess whether user performance in manual operations would be as good or better with the new than with the legacy system. The system used also allows flexible automated execution. The system and our data lay the foundation for integrating automated execution into the flow of procedures designed for humans. In our formative study, we found speed and accuracy of manual procedure execution was better using the new, integrated interface over the legacy design.

  2. Laboratory procedure for estimating residue dynamics of xenobiotic contaminants in a freshwater food chain

    USGS Publications Warehouse

    Johnson, B. Thomas

    1980-01-01

    A laboratory method of measuring the accumulation, transfer, elimination, and degradation of xenobiotic contaminants is described for organisms in a freshwater food chain (microorganisms, filter-feeder, and fish). A flow-through diluter-system, 14C-labeled contaminants, gas and thin-layer chromatography, autoradiography, and liquid scintillation spectrometry are used in making residue determinations. Accumulation factors and various index values are developed for measuring and estimating potential accumulation of xenobiotic contaminants by aquatic organisms. The laboratory procedure is economical, simple, reproducible, and ecologically relevant.

  3. SHARP User Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, Y. Q.; Shemon, E. R.; Thomas, J. W.

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculationmore » with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.« less

  4. Inorganic Analyses in Water Quality Control Programs. Training Manual.

    ERIC Educational Resources Information Center

    Kroner, Audrey; And Others

    This lecture/laboratory manual for a five-day course deals with the analysis of selected inorganic pollutants. The manual is an instructional aid for classroom presentations to those with little or no experience in the field, but having one year (or equivalent) of college level inorganic chemistry, one semester of college level quantitative…

  5. Evaluation of Manual Spelling, Observational and Incidental Learning Using Computer-Based Instruction with a Tablet PC, Large Screen Projection, and a Forward Chaining Procedure

    ERIC Educational Resources Information Center

    Purrazzella, Kimberly; Mechling, Linda C.

    2013-01-01

    The study employed a multiple probe design to investigate the effects of computer-based instruction (CBI) and a forward chaining procedure to teach manual spelling of words to three young adults with moderate intellectual disability in a small group arrangement. The computer-based program included a tablet PC whereby students wrote words directly…

  6. FIREDOC users manual, 3rd edition

    NASA Astrophysics Data System (ADS)

    Jason, Nora H.

    1993-12-01

    FIREDOC is the on-line bibliographic database which reflects the holdings (published reports, journal articles, conference proceedings, books, and audiovisual items) of the Fire Research Information Services (FRIS) at the Building and Fire Research Laboratory (BFRL), National Institute of Standards and Technology (NIST). This manual provides step-by-step procedures for entering and exiting the database via telecommunication lines, as well as a number of techniques for searching the database and processing the results of the searches. This Third Edition is necessitated by the change to a UNIX platform. The new computer allows for faster response time if searching via a modem and, in addition, offers internet accessibility. FIREDOC may be used with personal computers, using DOS or Windows, or with Macintosh computers and workstations. A new section on how to access Internet is included, and one on how to obtain the references of interest to you. Appendix F: Quick Guide to Getting Started will be useful to both modem and Internet users.

  7. General Drafting. Technical Manual.

    ERIC Educational Resources Information Center

    Department of the Army, Washington, DC.

    The manual provides instructional guidance and reference material in the principles and procedures of general drafting and constitutes the primary study text for personnel in drafting as a military occupational specialty. Included is information on drafting equipment and its use; line weights, conventions and formats; lettering; engineering charts…

  8. Mathematics: Essential to Marketing. Student's Manual and Teacher's Guide.

    ERIC Educational Resources Information Center

    Helton, Betty G.; Griffin, Jennie

    This document contains both a student's manual and a teacher's guide for high school mathematics essential to marketing. The student's manual contains 34 assignments within the following 11 units: (1) arithmetic fundamentals; (2) application of arithmetic fundamentals; (3) cashiering; (4) inventory procedures; (5) invoices; (6) computing employee…

  9. Washington Manual: A New Tool for Local School Accounting

    ERIC Educational Resources Information Center

    Federal Aid Planner, 1972

    1972-01-01

    An advance glimpse of the revised financial accounting methods for school districts recommended in a new manual from the U. S. Office of Education. The manual is designed to help school districts modernize their financial accounting procedures and their entire range of fiscal management practices. (Author/DN)

  10. Laboratory Analytical Procedures | Bioenergy | NREL

    Science.gov Websites

    analytical procedures (LAPs) to provide validated methods for biofuels and pyrolysis bio-oils research . Biomass Compositional Analysis These lab procedures provide tested and accepted methods for performing

  11. 9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...

  12. 9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...

  13. 9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...

  14. An Application of a Procedures Manual for Assessing the Socioeconomic Impact of the Construction and Operation of Coal Utilization Facilities in the Old West Region.

    ERIC Educational Resources Information Center

    Old West Regional Commission, Billings, MT.

    To evaluate and test the effectiveness of the "Procedures Manual for Assisting the Socioeconomic Impact of the Construction and Operation of Coal Utilization Facilities in the Old West Region," an impact study of a proposed electric generating station on the Laramie River near Wheatland, Wyoming, identifies difficulties encountered in…

  15. Manual physical therapy: we speak gibberish.

    PubMed

    Flynn, Timothy W; Childs, John D; Bell, Stephania; Magel, Jake S; Rowe, Robert H; Plock, Haideh

    2008-03-01

    In December of 2006, the American Academy of Orthopaedic Manual Physical Therapists (AAOMPT) convened a task force to create a framework for standardizing manual physical therapy procedures. The impetus came from many years of frustration with our ability to precisely communicate to each other, as well as to stakeholders outside our profession. To this end, a contribution titled "A Model for Standardizing Manipulation Terminology In Physical Therapy Practice" is published in this issue of the Journal.

  16. Step-by-Step Visual Manuals: Design and Development

    ERIC Educational Resources Information Center

    Urata, Toshiyuki

    2004-01-01

    The types of handouts and manuals that are used in technology training vary. Some describe procedures in a narrative way without graphics; some employ step-by-step instructions with screen captures. According to Thirlway (1994), a training manual should be like a tutor that permits a student to learn at his own pace and gives him confidence for…

  17. Health Project Management. A Manual of Procedures for Formulating and Implementing Health Projects.

    ERIC Educational Resources Information Center

    Bainbridge, J.; Sapirie, S.

    The manual presents 16 main steps for health project management, from project formulation through termination. The manual defines a health project as a temporary intensive effort to set up and put into operation a new or revised service that will result in the reduction of specific health or health-related problems. (Typical examples include the…

  18. Retrospective Conversion Manual: University Library Recon Project.

    ERIC Educational Resources Information Center

    Ramage, Pat

    This manual provides a brief description of the procedures employed by the University of South Alabama in converting their library records from print to computerized cataloging. A description of the procedure is followed by detailed instructions and examples. Rules for NOTIS-LCCN Conversion Records, OCLC--Telex Transfer, and Conversion of…

  19. Keypunching Manual. Third Edition.

    ERIC Educational Resources Information Center

    Oldsen, Carl F.; Spagnuolo, Lenore

    Presented in the manual are keypunching procedures with associated representative forms and keypunching cards for bibliographies and five basic types of abstracts which are used with the Control Data 3600 computer by the Michigan State University Materials Center for Handicapped Children and Youth (IMC HCY). Emphasis is given to keypunching all…

  20. Discretionary Grants Administration Manual.

    ERIC Educational Resources Information Center

    Office of Human Development Services (DHHS), Washington, DC.

    This manual sets forth applicable administrative policies and procedures to recipients of discretionary project grants or cooperative agreements awarded by program offices in the Office of Human Development Services (HDS). It is intended to serve as a basic reference for project directors and business officers of recipient organizations who are…

  1. IMAT graphics manual

    NASA Technical Reports Server (NTRS)

    Stockwell, Alan E.; Cooper, Paul A.

    1991-01-01

    The Integrated Multidisciplinary Analysis Tool (IMAT) consists of a menu driven executive system coupled with a relational database which links commercial structures, structural dynamics and control codes. The IMAT graphics system, a key element of the software, provides a common interface for storing, retrieving, and displaying graphical information. The IMAT Graphics Manual shows users of commercial analysis codes (MATRIXx, MSC/NASTRAN and I-DEAS) how to use the IMAT graphics system to obtain high quality graphical output using familiar plotting procedures. The manual explains the key features of the IMAT graphics system, illustrates their use with simple step-by-step examples, and provides a reference for users who wish to take advantage of the flexibility of the software to customize their own applications.

  2. Training Manuals and Technical Publications.

    ERIC Educational Resources Information Center

    Army Test and Evaluation Command, Aberdeen Proving Ground, MD.

    The objective of the Materiel Test Procedure is to describe methods for determining the need for adequacy of comprehensiveness, and clarity of training manuals and technical publications (or other pertinent types of literature) relating to the ammunition or ammunition components being tested. (Author)

  3. Alaska IPASS database preparation manual.

    Treesearch

    P. McHugh; D. Olson; C. Schallau

    1989-01-01

    Describes the data, their sources, and the calibration procedures used in compiling a database for the Alaska IPASS (interactive policy analysis simulation system) model. Although this manual is for Alaska, it provides generic instructions for analysts preparing databases for other geographical areas.

  4. Patient identification errors: the detective in the laboratory.

    PubMed

    Salinas, Maria; López-Garrigós, Maite; Lillo, Rosa; Gutiérrez, Mercedes; Lugo, Javier; Leiva-Salinas, Carlos

    2013-11-01

    The eradication of errors regarding patients' identification is one of the main goals for safety improvement. As clinical laboratory intervenes in 70% of clinical decisions, laboratory safety is crucial in patient safety. We studied the number of Laboratory Information System (LIS) demographic data errors registered in our laboratory during one year. The laboratory attends a variety of inpatients and outpatients. The demographic data of outpatients is registered in the LIS, when they present to the laboratory front desk. The requests from the primary care centers (PCC) are made electronically by the general practitioner. A manual step is always done at the PCC to conciliate the patient identification number in the electronic request with the one in the LIS. Manual registration is done through hospital information system demographic data capture when patient's medical record number is registered in LIS. Laboratory report is always sent out electronically to the patient's electronic medical record. Daily, every demographic data in LIS is manually compared to the request form to detect potential errors. Fewer errors were committed when electronic order was used. There was great error variability between PCC when using the electronic order. LIS demographic data manual registration errors depended on patient origin and test requesting method. Even when using the electronic approach, errors were detected. There was a great variability between PCC even when using this electronic modality; this suggests that the number of errors is still dependent on the personnel in charge of the technology. © 2013.

  5. The Tree Worker's Manual.

    ERIC Educational Resources Information Center

    Smithyman, S. J.

    This manual is designed to prepare students for entry-level positions as tree care professionals. Addressed in the individual chapters of the guide are the following topics: the tree service industry; clothing, eqiupment, and tools; tree workers; basic tree anatomy; techniques of pruning; procedures for climbing and working in the tree; aerial…

  6. NASA Radio Frequency Spectrum Management Manual

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The Radio Frequency (RF) Spectrum Management Manual sets forth procedures and guidelines for the management requirements for controlling the use of radio frequencies by the National Aeronautics and Space Administration. It is applicable to NASA Headquarters and field installations. NASA Management Instruction 1102.3 assigns the authority for management of radio frequencies for the National Aeronautics and Space Administration to the Associate Administrator for Space Operations, NASA Headquarters. This manual is issued in loose-leaf form and will be revised by page changes.

  7. NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR LABORATORY ASSISTANT TRAINING PLAN--GENERAL (UA-T-6.0)

    EPA Science Inventory

    The purpose of this SOP is to describe the training sequence of incoming student laboratory assistants. The procedure is designed to provide them with an overview of the project in terms of project goals, structure, and laboratory needs. This overview familiarizes the student l...

  8. 32 CFR 634.35 - Chemical testing policies and procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...

  9. 32 CFR 634.35 - Chemical testing policies and procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 4 2011-07-01 2011-07-01 false Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...

  10. 32 CFR 634.35 - Chemical testing policies and procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 4 2012-07-01 2011-07-01 true Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...

  11. 32 CFR 634.35 - Chemical testing policies and procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 4 2014-07-01 2013-07-01 true Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...

  12. 32 CFR 634.35 - Chemical testing policies and procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 4 2013-07-01 2013-07-01 false Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...

  13. 9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction... lp gene. (c) MGLP ReTi. Primers and probe should be utilized in a 25 µl reaction containing 12.5 µl...

  14. 9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction... lp gene. (c) MGLP ReTi. Primers and probe should be utilized in a 25 µl reaction containing 12.5 µl...

  15. Process Design Manual for Land Treatment of Municipal Wastewater.

    ERIC Educational Resources Information Center

    Crites, R.; And Others

    This manual presents a procedure for the design of land treatment systems. Slow rate, rapid infiltration, and overland flow processes for the treatment of municipal wastewaters are given emphasis. The basic unit operations and unit processes are discussed in detail, and the design concepts and criteria are presented. The manual includes design…

  16. 14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. Link to an..., 2010. (a) With each airplane or rotorcraft that was not type certificated with an Airplane or...

  17. Determination of quaternary ammonium compounds by potentiometric titration with an ionic surfactant electrode: single-laboratory validation.

    PubMed

    Price, Randi; Wan, Ping

    2010-01-01

    A potentiometric titration for determining the quaternary ammonium compounds (QAC) commonly found in antimicrobial products was validated by a single laboratory. Traditionally, QACs were determined by using a biphasic (chloroform and water) manual titration procedure. Because of safety considerations regarding chloroform, as well as the subjectivity of color indicator-based manual titration determinations, an automatic potentiometric titration procedure was tested with quaternary nitrogen product formulations. By using the Metrohm Titrando system coupled with an ionic surfactant electrode and an Ag/AgCl reference electrode, titrations were performed with various QAC-containing formulation products/matrixes; a standard sodium lauryl sulfate solution was used as the titrant. Results for the products tested are sufficiently reproducible and accurate for the purpose of regulatory product enforcement. The robustness of the method was measured by varying pH levels, as well as by comparing buffered versus unbuffered titration systems. A quantitation range of 1-1000 ppm quaternary nitrogen was established. Eight commercially available antimicrobial products covering a variety of matrixes were assayed; the results obtained were comparable to those obtained by the manual titration method. Recoveries of 94 to 104% were obtained for spiked samples.

  18. Solar Heating Systems: Student Manual.

    ERIC Educational Resources Information Center

    Green, Joanne; And Others

    This Student Manual for a Solar Heating System curriculum contains 22 units of instructional materials for students to use in a course or courses on solar heating systems (see note). For each unit (task), objectives, assignment sheets, laboratory assignments, information sheets, checkpoints (tests), and job sheets are provided. Materials are set…

  19. Reverberation Chamber Uniformity Validation and Radiated Susceptibility Test Procedures for the NASA High Intensity Radiated Fields Laboratory

    NASA Technical Reports Server (NTRS)

    Koppen, Sandra V.; Nguyen, Truong X.; Mielnik, John J.

    2010-01-01

    The NASA Langley Research Center's High Intensity Radiated Fields Laboratory has developed a capability based on the RTCA/DO-160F Section 20 guidelines for radiated electromagnetic susceptibility testing in reverberation chambers. Phase 1 of the test procedure utilizes mode-tuned stirrer techniques and E-field probe measurements to validate chamber uniformity, determines chamber loading effects, and defines a radiated susceptibility test process. The test procedure is segmented into numbered operations that are largely software controlled. This document is intended as a laboratory test reference and includes diagrams of test setups, equipment lists, as well as test results and analysis. Phase 2 of development is discussed.

  20. New Mexico Statewide Assessment Program (NMSAP) Procedures Manual, 2007-2008

    ERIC Educational Resources Information Center

    New Mexico Public Education Department, 2007

    2007-01-01

    This manual has been prepared for all New Mexico Statewide Assessment Program (NMSAP) assessment administrators, teachers, school specialists, and principals. It includes information about the following topics: PED contacts, New Mexico Standards Based Assessments (SBA), Grades 3-8 and 11; New Mexico High School Competency Examination (NMHSCE);…

  1. Innovative and Alternative Technology Assessment Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  2. Vocational Education Readiness Test Manual.

    ERIC Educational Resources Information Center

    Thomas, Edward L.; And Others

    This manual provides vocational instructors in public schools with standardized procedures in the form of a Vocational Education Readiness Test (VERT) for assessing the vocational potential of educable mentally handicapped (EMR) secondary school students. The various stages of VERT's development are traced: (1) visits with vocational trade…

  3. Cooperative Education. Instructor Coordinator's Manual.

    ERIC Educational Resources Information Center

    Farrow, Shirley

    Designed to provide an introduction to North Lake College's (NLC's) Cooperative Education Program, this manual contains information for the instructor/coordinator regarding the Dallas County Community College District's co-op policies and NLC's operational procedures and forms. First, section 1 defines cooperative education, states NLC's…

  4. Comparison of Battery-Powered and Manual Bone Biopsy Systems for Core Needle Biopsy of Sclerotic Bone Lesions.

    PubMed

    Cohen, Micah G; McMahon, Colm J; Kung, Justin W; Wu, Jim S

    2016-05-01

    The purpose of this study was to compare manual and battery-powered bone biopsy systems for diagnostic yield and procedural factors during core needle biopsy of sclerotic bone lesions. A total of 155 consecutive CT-guided core needle biopsies of sclerotic bone lesions were performed at one institution from January 2006 to November 2014. Before March 2012, lesions were biopsied with manual bone drill systems. After March 2012, most biopsies were performed with a battery-powered system and either noncoaxial or coaxial biopsy needles. Diagnostic yield, crush artifact, CT procedure time, procedure radiation dose, conscious sedation dose, and complications were compared between the manual and battery-powered core needle biopsy systems by Fisher exact test and t test. One-way ANOVA was used for subgroup analysis of the two battery-powered systems for procedure time and radiation dose. The diagnostic yield for all sclerotic lesions was 60.0% (93/155) and was significantly higher with the battery-powered system (73.0% [27/37]) than with the manual systems (55.9% [66/118]) (p = 0.047). There was no significant difference between the two systems in terms of crush artifact, procedure time, radiation dose, conscious sedation administered, or complications. In subgroup analysis, the coaxial battery-powered biopsies had shorter procedure times (p = 0.01) and lower radiation doses (p = 0.002) than the coaxial manual systems, but the noncoaxial battery-powered biopsies had longer average procedure times and higher radiation doses than the coaxial manual systems. In biopsy of sclerotic bone lesions, use of a battery-powered bone drill system improves diagnostic yield over use of a manual system.

  5. PNNL Hoisting and Rigging Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Haynie, Todd O.; Fullmer, Michael W.

    2008-12-29

    This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

  6. Vocational Education Safety Instruction Manual.

    ERIC Educational Resources Information Center

    Cropley, Russell, Ed.; Doherty, Susan Sloan, Ed.

    This manual describes four program areas in vocational education safety instruction: (1) introduction to a safety program; (2) resources to ensure laboratory safety; (3) safety program implementation; and (4) safety rules and safety tests. The safety rules and tests included in section four are for the most common tools and machines used in…

  7. 18 CFR 401.23 - Procedure.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 2 2014-04-01 2014-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...

  8. 18 CFR 401.23 - Procedure.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...

  9. 18 CFR 401.23 - Procedure.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 18 Conservation of Power and Water Resources 2 2012-04-01 2012-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...

  10. 18 CFR 401.23 - Procedure.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 18 Conservation of Power and Water Resources 2 2013-04-01 2012-04-01 true Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...

  11. 18 CFR 401.23 - Procedure.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...

  12. Facilities Data System Manual.

    ERIC Educational Resources Information Center

    Acridge, Charles W.; Ford, Tim M.

    The purposes of this manual are to set forth the scope and procedures for the maintenance and operation of the University of California facilities Data System (FDX) and to serve as a reference document for users of the system. FDX is an information system providing planning and management data about the existing physical plant. That is, it…

  13. Special Education Services: A Manual of Policies, Procedures and Guidelines.

    ERIC Educational Resources Information Center

    British Columbia Dept. of Education, Victoria.

    This document is intended to guide special education policy in British Columbia (Canada) and stresses the basic elements of Individual Education Plans, school-based teams, district-wide planning, and resource sharing. After an introduction on how to use the guide (including a glossary of terms), the manual is divided into eight sections that…

  14. Information Manual: Procedures, Planning Concepts, Subsystems. ABS Publication No. 3.

    ERIC Educational Resources Information Center

    California Univ., Berkeley.

    This report, the third in a series which presents the results of a systems analysis of the problem of providing science and engineering buildings at the university level, is a technical manual for using the Academic Building Systems (ABS) approach in programing, designing, and constructing such facilities. The document presents (1) planning…

  15. Physical Science Laboratory Manual, Experimental Version.

    ERIC Educational Resources Information Center

    Cooperative General Science Project, Atlanta, GA.

    Provided are physical science laboratory experiments which have been developed and used as a part of an experimental one year undergraduate course in general science for non-science majors. The experiments cover a limited number of topics representative of the scientific enterprise. Some of the topics are pressure and buoyancy, heat, motion,…

  16. Safety in the Chemical Laboratory: Procedures for Laboratory Destruction of Chemicals.

    ERIC Educational Resources Information Center

    McKusick, Blaine C.

    1984-01-01

    Discusses a National Research Council report which summarizes what laboratories need to know about Environmental Protection Agency and Department of Transportation regulations that apply to laboratory waste. The report provides guidelines for establishing and operating waste management systems for laboratories and gives specific advice on waste…

  17. 49 CFR 193.2903 - Security procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures must...

  18. 49 CFR 193.2903 - Security procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures must...

  19. 49 CFR 193.2903 - Security procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures must...

  20. Applied Physics Laboratory, An Experimental Program for Aerospace Education, 12th Year.

    ERIC Educational Resources Information Center

    Abramson, David A.

    This physics laboratory manual is the result of curriculum development begun at Aviation High School (New York City) in 1967. It represents a semester of advanced laboratory work for those students who have completed the usual course in physics. The 91 laboratory experiments included in the manual have been developed and modified through use for…

  1. An operation manual for a time-series, storm-activated suspended sediment sampler deployed in the coastal ocean: function, maintenance, and testing procedures

    USGS Publications Warehouse

    Rendigs, Richard R.; Bothner, Michael H.

    2004-01-01

    This manual describes the operation and testing procedures for two models of a multi-port suspended sediment sampler that are moored in the coastal ocean and that collect samples on a programmable time schedule that can be interrupted to collect during a storm. The ability to sense and collect samples before, during, and after the height of a storm is a unique feature of these instruments because it provides samples during conditions when it is difficult or impossible to sample from a surface ship. The sensors used to trigger storm sampling are a transmissometer or a pressure sensor. The purpose of such samples is to assess composition and concentration of sediment resuspended from the seafloor during storms and subsequently transported within the coastal system. Both light transmission and the standard deviation of pressure from surface waves correlate with the passage of major storms. The instruments successfully identified the onset of storms and collected samples before, during, and after the storm maximum as programmed. The accuracy of determining suspended matter concentrations collected by the sediment sampler has not been fully evaluated. Preliminary laboratory tests using a suspension of muddy sediment collected in a near-bottom sediment trap yielded excellent results. However in laboratory tests with different sediment types, the suspended matter concentrations determined with these samplers became less accurate with increasing average grain size. Future calibration work is necessary and should be conducted in a facility that ideally has a water depth of at least 30 feet to prevent cavitation of the pump that draws sea water through the filters. The test facility should also have the capability for adding suspended matter of known composition and concentration to a fixed volume of seawater that is well mixed.

  2. Nursing Procedures. NAVMED P-5066.

    ERIC Educational Resources Information Center

    Bureau of Medicine and Surgery (Navy), Washington, DC.

    The revised manual of nursing procedures covers fundamental nursing care, admission and discharge of the patient, assisting with therapeutic measures, pre- and postoperative care, diagnostic tests and procedures, and isolation technique. Each of the over 300 topics includes the purpose, equipment, and procedure to be used and, where relevant, such…

  3. The PTA TV Trainer's Manual.

    ERIC Educational Resources Information Center

    National PTA, Chicago, IL.

    This updated version of a 1977 manual provides information about the television industry, communications regulations, and citizen recourse to improper broadcasting procedures for use in training Parent Teacher Association (PTA) volunteers to work for effective change within the television industry. The first section discusses the operations of the…

  4. Stationary Engineering Science Manual--3.

    ERIC Educational Resources Information Center

    Steingress, Frederick M.; And Others

    This manual provides in-depth coverage of topics related to boiler operations. The assignments contain an objective, descriptive information, reference sources, procedures, and assignments. Sixteen units are provided and address topics such as: (1) steam engineering concepts; (2) boiler fittings; (3) feed-water, steam, and combustion accessories;…

  5. Monograph Acquisitions Unit Staff Manual.

    ERIC Educational Resources Information Center

    Johnson, Steve; And Others

    This staff manual provides a thorough description of the functions, procedures, and files of the monograph acquisitions department at South Carolina's Clemson University Library. It is noted that the department is responsible for both firm order and standing order purchases. Following introductory material, the principal processes of searching,…

  6. 78 FR 5281 - Revisions to Procedural Rules To Clarify Practices and Procedures Applicable in Permit Appeals...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-25

    ... Practice Manual. Revising the regulation to reflect current practice will provide clarity to practitioners... date of publication in the Federal Register. The sixty days between the date of publication and the... standing orders, and the Board's Practice Manual. The amendments to the rule clarify review procedures for...

  7. Reporting Manual for Florida Community Colleges.

    ERIC Educational Resources Information Center

    Florida State Board of Community Colleges, Tallahassee.

    Uniform procedures, terminology, definitions, forms, and instructions are presented to aid individual Florida community colleges in completing state reporting requirements. Following introductory information concerning the Community College Management Information System (CCMIS) the manual explains the purpose and characteristics of the Community…

  8. Measuring moisture content in living chaparral: a field user's manual

    Treesearch

    Clive M. Countryman; William A. Dean

    1979-01-01

    This manual standardizes procedures for determining the moisture content of living chaparral for use in a proposed statewide system of monitoring living fuel moisture. The manual includes a comprehensive examination of fuel moisture variations in California chaparral, and describes techniques for sampling these variations. Equipment needed to sample and determine...

  9. Guatemala's ministry of health rapid response team manuals.

    PubMed

    Hernandez, Luis; Hanson, Kimberly M; Martel, Lise D

    2014-01-01

    The function of public health rapid response teams (RRTs) is to quickly identify, investigate, and control an outbreak before it can spread. The Central America Regional Office in Guatemala provided assistance to the Guatemalan Ministry of Health and Social Assistance (MSPAS) to develop RRT manuals at the district and regional levels. The manuals are divided into 4 sections: background, activity lists, standard operating procedures, and annexes. The manuals outline Guatemala's RRT members' responsibilities and will be tested in the near future through tabletop exercises. The development of the manuals is a concrete and significant step toward the attainment of Guatemala's IHR goals and should be integrated into a larger emergency management system to promote "a world safe and secure from global health threats posed by infectious diseases."

  10. Programmed Instruction Manual for a New Solar and Energy Conservation Laboratory. Final Evaluation Report.

    ERIC Educational Resources Information Center

    State Univ. of New York, Farmingdale. Agricultural and Technical Coll.

    A programmed instruction course was developed, consisting of fifteen experiments encompassing eleven separate pieces of equipment operational in a solar and energy conservation lab. The programmed instruction manual for the lab was evaluated and revised during a workshop. This evaluation indicated that both the lab and manual are valuable tools…

  11. Organic Analyses in Water Quality Control Programs. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This document is a lecture/laboratory manual dealing with the analysis of selected organic pollutants. It is intended for use by those having little or no experience in the field, but having one year (or equivalent) of college organic chemistry, and having basic laboratory skills (volumetric glassware, titration, analytical and trip balances).…

  12. Review of recommendations for the management of dental trauma presented in first-aid textbooks and manuals.

    PubMed

    Emerich, Katarzyna; Gazda, Ewa

    2010-06-01

    To be able to help at the site of the oro-facial injury, the majority of persons would turn to medical books and first-aid books to extend their knowledge. Proper information in first-aid textbooks and manuals should be the best way to present necessary procedures on how to act at the site of injury. The objective of this review is to report the quality of the knowledge presented in first-aid books and manuals. We carried out a review of first-aid international textbooks and manuals available in Medical University Libraries in Poland. The inclusion criteria were all manuals on first-aid that were written for medical staff and lay persons, and were published between 1969 and 2007. All texts were screened for dental trauma treatment recommendations. Our literature review has shown that among 45 first-aid textbooks and manuals only 19 mention procedures for use in case of dental trauma. Of those texts, only 13 detail the storage media for an avulsed tooth until replantation. Current, evidence-based, recommendations concerning first-aid procedures after dental trauma should be incorporated in forthcoming editions of first-aid textbooks and manuals. The guidance on procedures contained in reviewed texts is misleading.

  13. Biomedical Science, Unit III: The Circulatory System in Health and Science. The Heart and Blood Vessels; Blood and Its Properties; The Urinary Tract. Laboratory Manual. Revised Version, 1976.

    ERIC Educational Resources Information Center

    Biomedical Interdisciplinary Curriculum Project, Berkeley, CA.

    This laboratory manual presents activities for a unit of science within the Biomedical Interdisciplinary Curriculum Project (BICP), a two-year interdisciplinary precollege curriculum aimed at preparing high school students for entry into college and vocational programs leading to a career in the health field. These twenty-five laboratory…

  14. Library Binding Manual. Revised Edition.

    ERIC Educational Resources Information Center

    Lakhanpal, S. K.

    This procedural manual is designed to be used in bindery sections in public, university and special libraries. It briefly discusses these general matters: administrative control; selection of a binder; when and what to bind; conventional binding; routines; missing issues; schedule for shipments; temporary binding; rare books, maps and newspapers;…

  15. Surgical manual of the Korean Gynecologic Oncology Group: ovarian, tubal, and peritoneal cancers.

    PubMed

    Jeon, Seob; Lee, Sung Jong; Lim, Myong Cheol; Song, Taejong; Bae, Jaeman; Kim, Kidong; Lee, Jung Yun; Kim, Sang Wun; Chang, Suk Joon; Lee, Jong Min

    2017-01-01

    The Surgery Treatment Modality Committee of the Korean Gynecologic Oncology Group has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we describe surgical procedure for ovarian, fallopian tubal, and peritoneal cancers.

  16. Surgical manual of the Korean Gynecologic Oncology Group: ovarian, tubal, and peritoneal cancers

    PubMed Central

    2017-01-01

    The Surgery Treatment Modality Committee of the Korean Gynecologic Oncology Group has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we describe surgical procedure for ovarian, fallopian tubal, and peritoneal cancers. PMID:27670260

  17. Practical Physics Labs: A Resource Manual.

    ERIC Educational Resources Information Center

    Goodwin, Peter

    This resource manual focuses on physics labs that relate to the world around us and utilize simple equipment and situations. Forty-five laboratories are included that relate to thermodynamics, electricity, magnetism, dynamics, optics, wave transmission, centripetal force, and atomic physics. Each lab has three sections. The first section…

  18. MAVARIC - a comparison of automation-assisted and manual cervical screening: a randomised controlled trial.

    PubMed

    Kitchener, H C; Blanks, R; Cubie, H; Desai, M; Dunn, G; Legood, R; Gray, A; Sadique, Z; Moss, S

    2011-01-01

    The principal objective was to compare automation-assisted reading of cervical cytology with manual reading using the histological end point of cervical intraepithelial neoplasia grade II (CIN2) or worse (CIN2+). Secondary objectives included (i) an assessment of the slide ranking facility of the Becton Dickinson (BD) FocalPoint™ Slide Profiler (Becton Dickinson, Franklin Lakes, NJ, USA), especially 'No Further Review', (ii) a comparison of the two approved automated systems, the ThinPrep® Imaging System (Hologic, Bedford, MA, USA) and the BD FocalPoint Guided Screener Imaging System, and (iii) automated versus manual in terms of productivity and cost-effectiveness. A 1 : 2 randomised allocation of slides to either manual reading or automation-assisted paired with manual reading. Cytoscreeners were blinded to whether samples would be read only manually or manually paired with automated. Slide reading procedures followed real-life laboratory protocol to produce a final result and, for paired readings, the worse result determined the management. Costs per event were estimated and combined with productivity to produce a cost per slide, per woman and per CIN2+ and cervical intraepithelial neoplasia grade III (CIN3) or worse (CIN3+) lesion detected. Cost-effectiveness was estimated using cost per CIN2+ detected. Lifetime cost-effectiveness in terms of life-years and quality-adjusted life-years was estimated using a mathematical model. Liquid-based cytology samples were obtained in primary care, and a small number of abnormal samples were obtained from local colposcopy clinics, from different women, in order to enrich the proportion of abnormals. All of the samples were read in a single large service laboratory. Liquid residues used for human papillomavirus (HPV) triage were tested (with Hybrid Capture 2, Qiagen, Crawley, UK) in a specialist virology laboratory in Edinburgh, UK. Histopathology was read by a specialist gynaecological pathology team blinded to HPV

  19. The WHO/PEPFAR collaboration to prepare an operations manual for HIV prevention, care, and treatment at primary health centers in high-prevalence, resource-constrained settings: defining laboratory services.

    PubMed

    Spira, Thomas; Lindegren, Mary Lou; Ferris, Robert; Habiyambere, Vincent; Ellerbrock, Tedd

    2009-06-01

    The expansion of HIV/AIDS care and treatment in resource-constrained countries, especially in sub-Saharan Africa, has generally developed in a top-down manner. Further expansion will involve primary health centers where human and other resources are limited. This article describes the World Health Organization/President's Emergency Plan for AIDS Relief collaboration formed to help scale up HIV services in primary health centers in high-prevalence, resource-constrained settings. It reviews the contents of the Operations Manual developed, with emphasis on the Laboratory Services chapter, which discusses essential laboratory services, both at the center and the district hospital level, laboratory safety, laboratory testing, specimen transport, how to set up a laboratory, human resources, equipment maintenance, training materials, and references. The chapter provides specific information on essential tests and generic job aids for them. It also includes annexes containing a list of laboratory supplies for the health center and sample forms.

  20. California School Accounting Manual. 1984 Edition.

    ERIC Educational Resources Information Center

    Lundin, Janet, Ed.

    California's official school accounting procedures, amended in 1984 to clarify definitions and improve program cost accounting, are presented. Following an introduction that discusses general characteristics of school accounting, the manual explains the following areas of accounting practice: (1) financial reporting; (2) income; (3) expenditures;…

  1. Children's Health Services Manual. Revised Edition.

    ERIC Educational Resources Information Center

    South Carolina State Dept. of Health and Environmental Control, Columbia.

    This manual for South Carolina's child health personnel covers program planning, evaluation, monitoring, and administration, and provides standards, procedures, policies, and regulations concerning health services for children in the state. An initial section on children's health services covers eligibility; the Women, Infants and Children…

  2. Medical Service Clinical Laboratory Procedure--Hematology.

    ERIC Educational Resources Information Center

    Department of the Army, Washington, DC.

    Presented are laboratory studies focusing on blood cells and the complete scheme of blood coagulation. Formed is the basis for the following types of laboratory operations: (1) distinguishing the morphology of normal and abnormal blood cells; (2) measuring the concentrations or number of blood cells; (3) measuring concentration and detecting…

  3. Marine and Environmental Studies Field Manual.

    ERIC Educational Resources Information Center

    Cranston School Dept., RI.

    This laboratory manual was developed for a field-oriented high school oceanology program. The organization of the units includes a selection of supplementary activities to allow students to explore ocean studies in more depth. Included are 19 units. The units include biological oceanography, physical oceanography, and some social science topics. A…

  4. Manual for Courts-Martial United States. 2002 Edition

    DTIC Science & Technology

    2002-01-01

    are enlistment papers, physical exam- ination papers, outline-figure and fingerprint cards, forensic laboratory reports, chain of custody docu- ments...physical examination papers, outline figure and fin- gerprint cards, forensic laboratory reports, chain of custody documents, morning reports and...Para. 142 e of the 1969 Manual, “Polygraph tests and drug- induced or hypnosis -induced interviews,” has been deleted as a result of the adoption of

  5. Manual for Courts-Martial United States 1998 Edition.

    DTIC Science & Technology

    1998-01-01

    exam- ination papers, outline-figure and fingerprint cards, forensic laboratory reports, chain of custody docu- ments, morning reports and other...examination papers, outline figure and fin- gerprint cards, forensic laboratory reports, chain of custody documents, morning reports and other per...the 1969 Manual, "Polygraph tests and drug- induced or hypnosis -induced interviews," has been deleted as a result of the adoption of Rule 702. Para

  6. Parent Child Center Program Management Information System. User's Manual.

    ERIC Educational Resources Information Center

    Warner, Donna D.; And Others

    This manual describes procedures for collecting, recording, and reporting in a uniform, timely manner critical information necessary to the making of key management decisions for parent child centers as well as for the parent child center program. The first section describes recommended data collection and recordkeeping procedures for such…

  7. 49 CFR 195.402 - Procedural manual for operations, maintenance, and emergencies.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... effective. This manual shall be prepared before initial operations of a pipeline system commence, and... in a timely and effective manner. (3) Operating, maintaining, and repairing the pipeline system in... public officials to learn the responsibility and resources of each government organization that may...

  8. References & Resources for Secretaries and Clerical Personnel, 1980. Manual 4200-1.

    ERIC Educational Resources Information Center

    Van Gelder, Naneene, Ed.

    Developed as a resource guide for all secretaries and clerical personnel employed in the San Diego Community College District (SDCCD), this manual provides information on matters ranging from district procedures and office operations to English usage and professional growth. The manual's 21 chapters cover: (1) district history, philosophy, and…

  9. 49 CFR 193.2503 - Operating procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2013-10-01 2013-10-01 false Operating procedures. 193.2503 Section 193.2503...

  10. 49 CFR 193.2503 - Operating procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2011-10-01 2011-10-01 false Operating procedures. 193.2503 Section 193.2503...

  11. 49 CFR 193.2503 - Operating procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2014-10-01 2014-10-01 false Operating procedures. 193.2503 Section 193.2503...

  12. 49 CFR 193.2503 - Operating procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2012-10-01 2012-10-01 false Operating procedures. 193.2503 Section 193.2503...

  13. Patron Relations: A Survival Manual.

    ERIC Educational Resources Information Center

    Turner, Bonnie L., Comp.; Downs, Rondi, Comp.

    Recognizing the responsibility of library staff members of maintain a pleasant environment for the public in the library, this manual discusses the library user's and library employee's rights under the law and how to protect them. It is arranged alphabetically by the type of problem or emergency that may be encountered. The procedure for handling…

  14. Laboratory, Field, and Analytical Procedures for Using ...

    EPA Pesticide Factsheets

    Regardless of the remedial technology invoked to address contaminated sediments in the environment, there is a critical need to have tools for assessing the effectiveness of the remedy. In the past, these tools have included chemical and biomonitoring of the water column and sediments, toxicity testing and bioaccumulation studies performed on site sediments, and application of partitioning, transport and fate modeling. All of these tools served as lines of evidence for making informed environmental management decisions at contaminated sediment sites. In the last ten years, a new tool for assessing remedial effectiveness has gained a great deal of attention. Passive sampling offers a tool capable of measuring the freely dissolved concentration (Cfree) of legacy contaminants in water and sediments. In addition to assessing the effectiveness of the remedy, passive sampling can be applied for a variety of other contaminated sediments site purposes involved with performing the preliminary assessment and site inspection, conducting the remedial investigation and feasibility study, preparing the remedial design, and assessing the potential for contaminant bioaccumulation. While there is a distinct need for using passive sampling at contaminated sediments sites and several previous documents and research articles have discussed various aspects of passive sampling, there has not been definitive guidance on the laboratory, field and analytical procedures for using pas

  15. 42 CFR 493.1251 - Standard: Procedure manual.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived Testing Analytic... intervals (normal values). (11) Imminently life-threatening test results, or panic or alert values. (12... reporting patient results including, when appropriate, the protocol for reporting imminently life...

  16. 42 CFR 493.1251 - Standard: Procedure manual.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived Testing Analytic... intervals (normal values). (11) Imminently life-threatening test results, or panic or alert values. (12... reporting patient results including, when appropriate, the protocol for reporting imminently life...

  17. 42 CFR 493.1251 - Standard: Procedure manual.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived Testing Analytic... intervals (normal values). (11) Imminently life-threatening test results, or panic or alert values. (12... reporting patient results including, when appropriate, the protocol for reporting imminently life...

  18. Battery Test Manual For 12 Volt Start/Stop Hybrid Electric Vehicles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Belt, Jeffrey R.

    This manual was prepared by and for the United Stated Advanced Battery Consortium (USABC) Electrochemical Energy Storage Team. It is based on the targets established for 12 Volt Start/Stop energy storage development and is similar (with some important changes) to an earlier manual for the former FreedomCAR program. The specific procedures were developed primarily to characterize the performance of energy storage devices relative to the USABC requirements. However, it is anticipated that these procedures will have some utility for characterizing 12 Volt Start/Stop hybrid energy storage device behavior in general.

  19. Technical Manual for Batteries, Navy Lithium Safety Program Responsibilities and Procedures

    DTIC Science & Technology

    2004-08-19

    lithium ion batteries and all equipment powered by lithium electrochemical power source(s) through all phases of the life of such systems. The purpose of this manual is to establish safety guidelines for the selection, design, testing, evaluation, use, packaging, storage, transportation and disposal of lithium

  20. The Impartial Hearing Officer: A Procedural Safeguards Training Manual for Utah.

    ERIC Educational Resources Information Center

    Utah State Univ., Salt Lake City. Intermountain Plains Regional Resource Center.

    The manual for due process hearing officers in Utah provides information on prehearing activities, hearing activities, decision making processes, and final reporting on hearings regarding conflicts or disagreements between the parents and the school district concerning the most appropriate educational program for the handicapped child. An…

  1. Microscopic Analysis of Activated Sludge. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This training manual presents material on the use of a compound microscope to analyze microscope communities, present in wastewater treatment processes, for operational control. Course topics include: sampling techniques, sample handling, laboratory analysis, identification of organisms, data interpretation, and use of the compound microscope.…

  2. Photovoltaic: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

    ERIC Educational Resources Information Center

    Auer, Herbert J.

    This instructional manual contains 11 learning activity packets for use in a workshop on photovoltaic converters. The lessons cover the following topics: introduction; solar radiation--input for photovoltaic converters; photovoltaic cells; solar electric generator systems; characteristics of silicon cells; photovoltaic module source resistance;…

  3. A manual carotid compression technique to overcome difficult filter protection device retrieval during carotid artery stenting.

    PubMed

    Nii, Kouhei; Nakai, Kanji; Tsutsumi, Masanori; Aikawa, Hiroshi; Iko, Minoru; Sakamoto, Kimiya; Mitsutake, Takafumi; Eto, Ayumu; Hanada, Hayatsura; Kazekawa, Kiyoshi

    2015-01-01

    We investigated the incidence of embolic protection device retrieval difficulties at carotid artery stenting (CAS) with a closed-cell stent and demonstrated the usefulness of a manual carotid compression assist technique. Between July 2010 and October 2013, we performed 156 CAS procedures using self-expandable closed-cell stents. All procedures were performed with the aid of a filter design embolic protection device. We used FilterWire EZ in 118 procedures and SpiderFX in 38 procedures. The embolic protection device was usually retrieved by the accessory retrieval sheath after CAS. We applied a manual carotid compression technique when it was difficult to navigate the retrieval sheath through the deployed stent. We compared clinical outcomes in patients where simple retrieval was possible with patients where the manual carotid compression assisted technique was used for retrieval. Among the 156 CAS procedures, we encountered 12 (7.7%) where embolic protection device retrieval was hampered at the proximal stent terminus. Our manual carotid compression technique overcame this difficulty without eliciting neurologic events, artery dissection, or stent deformity. In patients undergoing closed-cell stent placement, embolic protection device retrieval difficulties may be encountered at the proximal stent terminus. Manual carotid compression assisted retrieval is an easy, readily available solution to overcome these difficulties. Copyright © 2015 National Stroke Association. Published by Elsevier Inc. All rights reserved.

  4. Monitoring and Evaluation of Literacy and Continuing Education Programmes. Practitioners' Manual.

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

    This manual, which is intended for practitioners involved in the Asia and the Pacific Programme of Education for All, explains the basic concepts and procedures involved in monitoring and evaluating literacy and continuing education programs. The following are among the topics discussed in the manual's eight chapters: (1) understanding monitoring…

  5. Marine safety manual, volume 5 : investigations and enforcement

    DOT National Transportation Integrated Search

    2008-04-01

    This Manual established policies and procedures for the activities associated with the investigation of marine casualties, investigation into recreational boating deaths, detecting violations of criminal and other statutes for law enforcement purpose...

  6. Supervision Manual: Social Studies Program.

    ERIC Educational Resources Information Center

    Szabo, Lester John

    This manual is designed to help school personnel implement a social studies program in grades K-12 in New York State. It provides the State mandates for social studies, recommends the scope and sequence of the social studies program, and suggests a procedure for implementing social studies revisions at the local level. How to form a local social…

  7. Operation and maintenance manual for a preprototype Sabatier carbon dioxide reduction subsystem

    NASA Technical Reports Server (NTRS)

    Kleiner, G. N.

    1981-01-01

    The manual delineates the procedures, precautions and necessary sequences of steps required to prepare the package for test, provide troubleshooting information and perform required maintenance by the operating crew. The manual is divided into five sections: Installation, Checkout, Operation, Failure Detection/Isolation and Maintenance.

  8. Measuring pedestrian volumes and conflicts. Volume III, Measuring pedestrian volumes : a users manual

    DOT National Transportation Integrated Search

    1988-03-01

    Users of the manual are expected to be in divisions responsible for pedestrian safety in cities, counties, and other jurisdictions. The users manual outlines a step-by-step procedure to measure pedestrian volumes using small count intervals. Appendix...

  9. Hanford Internal Dosimetry Program Manual, PNL-MA-552

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Carbaugh, Eugene H.; Bihl, Donald E.; Maclellan, Jay A.

    2009-09-24

    This manual is a guide to the services provided by the Hanford Internal Dosimetry Program (IDP), which is operated by the Pacific Northwest National Laboratory.( ) for the U.S. Department of Energy Richland Operations Office, Office of River Protection and their Hanford Site contractors. The manual describes the roles of and relationships between the IDP and the radiation protection programs of the Hanford Site contractors. Recommendations and guidance are also provided for consideration in implementing bioassay monitoring and internal dosimetry elements of radiation protection programs.

  10. Advanced figure sensor operations and maintenance manual

    NASA Technical Reports Server (NTRS)

    Robertson, H. J.

    1972-01-01

    This manual contains procedures for installing, operating, and maintaining the optical figure sensor and its associated electronic controls. The optical figure sensor, a system of integrated components, comprises: (1) a phase measuring modified interferometer employing a single frequency 6328 A laser, and a Vidissector; (2) a two-axis automatic thermal compensation control mount; (3) a five degree of freedom manual adjustment stand; and (4) a control console. This instrument provides real time output data of optical figure errors for spherical mirrors, and is also capable of measuring aspherical mirrors if a null corrector is added.

  11. Dropout Count Procedural Handbook.

    ERIC Educational Resources Information Center

    Nevada State Dept. of Education, Carson City. Planning, Research and Evaluation Branch.

    This manual outlines the procedure for counting dropouts from the Nevada schools. The State Department of Education instituted a new dropout counting procedure to its student accounting system in January 1988 as part of its response to recommendations of a task force on at-risk youth. The count is taken from each secondary school and includes…

  12. 29 CFR 1926.1080 - Safe practices manual.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Diving General Operations Procedures § 1926.1080 Safe practices manual. Note: The requirements applicable to construction work under this section are...

  13. 9 CFR 147.17 - Laboratory procedure recommended for the bacteriological examination of cull chicks and poults...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...

  14. 9 CFR 147.17 - Laboratory procedure recommended for the bacteriological examination of cull chicks and poults...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...

  15. 9 CFR 147.17 - Laboratory procedure recommended for the bacteriological examination of cull chicks and poults...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...

  16. 9 CFR 147.17 - Laboratory procedure recommended for the bacteriological examination of cull chicks and poults...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...

  17. 9 CFR 147.17 - Laboratory procedure recommended for the bacteriological examination of cull chicks and poults...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...

  18. Oregon School Bond Manual. Fifth Edition.

    ERIC Educational Resources Information Center

    Oregon State Dept. of Education, Salem.

    To help school districts comply with Oregon's school bond laws, this manual provides guidelines for school district attorneys and personnel in the issuance and sale of school bonds. The document describes the proper time sequence of the bonding procedure, including elections, school board authorizations, necessary certificates, bond registration…

  19. OECHC Program Review Guide. A Manual of Standard Operating Procedures. Revised.

    ERIC Educational Resources Information Center

    New York State Education Dept. Albany. Office for the Education of Children with Handicapping Conditions.

    The program review guide provides a framework and a source of reference for the monitoring staff of the New York State Education Department's Office for Education of Children with Handicapping Conditions. The manual simultaneously provides a means for school districts, the Boards of Cooperative Educational Services, and other agencies to monitor…

  20. Manual vs. computer-assisted sperm analysis: can CASA replace manual assessment of human semen in clinical practice?

    PubMed

    Talarczyk-Desole, Joanna; Berger, Anna; Taszarek-Hauke, Grażyna; Hauke, Jan; Pawelczyk, Leszek; Jedrzejczak, Piotr

    2017-01-01

    The aim of the study was to check the quality of computer-assisted sperm analysis (CASA) system in comparison to the reference manual method as well as standardization of the computer-assisted semen assessment. The study was conducted between January and June 2015 at the Andrology Laboratory of the Division of Infertility and Reproductive Endocrinology, Poznań University of Medical Sciences, Poland. The study group consisted of 230 men who gave sperm samples for the first time in our center as part of an infertility investigation. The samples underwent manual and computer-assisted assessment of concentration, motility and morphology. A total of 184 samples were examined twice: manually, according to the 2010 WHO recommendations, and with CASA, using the program set-tings provided by the manufacturer. Additionally, 46 samples underwent two manual analyses and two computer-assisted analyses. The p-value of p < 0.05 was considered as statistically significant. Statistically significant differences were found between all of the investigated sperm parameters, except for non-progressive motility, measured with CASA and manually. In the group of patients where all analyses with each method were performed twice on the same sample we found no significant differences between both assessments of the same probe, neither in the samples analyzed manually nor with CASA, although standard deviation was higher in the CASA group. Our results suggest that computer-assisted sperm analysis requires further improvement for a wider application in clinical practice.

  1. Procedures Manual: A Guide to Uniform Grant and Contract Management Standards and The Common Rule for Uniform Administrative Requirements for Grants and Cooperative Agreements to State and Local Governments.

    ERIC Educational Resources Information Center

    Conable, Sharon R.

    This manual has been compiled to provide consistent grant application and administrative procedures for state agencies which award grants or contracts to local governments. It provides a conceptual framework of information concerning the reporting, financial, contractual, and auditing requirements for recipients of Texas State Library grants…

  2. Installation of Computerized Procedure System and Advanced Alarm System in the Human Systems Simulation Laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Le Blanc, Katya Lee; Spielman, Zachary Alexander; Rice, Brandon Charles

    2016-04-01

    This report describes the installation of two advanced control room technologies, an advanced alarm system and a computerized procedure system, into the Human Systems Simulation Laboratory (HSSL). Installation of these technologies enables future phases of this research by providing a platform to systematically evaluate the effect of these technologies on operator and plant performance.

  3. Developing Basic Math Skills for Marketing. Student Manual and Laboratory Guide.

    ERIC Educational Resources Information Center

    Klewer, Edwin D.

    Field tested with students in grades 10-12, this manual is designed to teach students in marketing courses basic mathematical concepts. The instructional booklet contains seven student assignments covering the following topics: why basic mathematics is so important, whole numbers, fractions, decimals, percentages, weights and measures, and dollars…

  4. PHABSIM for Windows User's Manual and Exercises

    USGS Publications Warehouse

    Waddle, Terry

    2001-01-01

    This document is a combined self-study textbook and reference manual. The material is presented in the general order of a PHABSIM study placed within the context of an IFIM application. The document may also be used as reading material for a lecture-based course. This manual provides documentation of the various PHABSIM programs so every option of each program is treated.This text is not a guidebook for organization and implementation of a PHABSIM study. Use of PHABSIM should take place in the context of an IFIM application. See Bovee et al. (1998) for guidance in designing and performing a PHABSIM study as part of a larger IFIM application.The document concludes with a set of 12 laboratory exercises. Users are strongly encouraged to work through the laboratory exercises prior to applying the software to a study. Working through the exercises will enhance familiarity with the programs and answer many questions that may arise during a PHABSIM analysis.

  5. Comparison of remote magnetic navigation ablation and manual ablation of idiopathic ventricular arrhythmia after failed manual ablation.

    PubMed

    Kawamura, Mitsuharu; Scheinman, Melvin M; Tseng, Zian H; Lee, Byron K; Marcus, Gregory M; Badhwar, Nitish

    2017-01-01

    Catheter ablation for idiopathic ventricular arrhythmia (VA) is effective and safe, but efficacy is frequently limited due to an epicardial origin and difficult anatomy. The remote magnetic navigation (RMN) catheter has a flexible catheter design allowing access to difficult anatomy. We describe the efficacy of the RMN for ablation of idiopathic VA after failed manual ablation. Among 235 patients with idiopathic VA referred for catheter ablation, we identified 51 patients who were referred for repeat ablation after a failed manual ablation. We analyzed the clinical characteristics, including the successful ablation site and findings at electrophysiology study, in repeat procedures conducted using RMN as compared with manual ablation. Among these patients, 22 (43 %) underwent repeat ablation with the RMN and 29 (57 %) underwent repeat ablation with a manual ablation. Overall, successful ablation rate was significantly higher using RMN as compared with manual ablation (91 vs. 69 %, P = 0.02). Fluoroscopy time in the RMN was 17 ± 12 min as compared with 43 ± 18 min in the manual ablation (P = 0.009). Successful ablation rate in the posterior right ventricular outflow tract (RVOT) plus posterior-tricuspid annulus was higher with RMN as compared with manual ablation (92 vs. 50 %, P = 0.03). Neither groups exhibited any major complications. The RMN is more effective in selected patients with recurrent idiopathic VA after failed manual ablation and is associated with less fluoroscopy time. The RMN catheters have a flexible design enabling them to access otherwise difficult anatomy including the posterior tricuspid annulus and posterior RVOT.

  6. Nonanalytic Laboratory Automation: A Quarter Century of Progress.

    PubMed

    Hawker, Charles D

    2017-06-01

    Clinical laboratory automation has blossomed since the 1989 AACC meeting, at which Dr. Masahide Sasaki first showed a western audience what his laboratory had implemented. Many diagnostics and other vendors are now offering a variety of automated options for laboratories of all sizes. Replacing manual processing and handling procedures with automation was embraced by the laboratory community because of the obvious benefits of labor savings and improvement in turnaround time and quality. Automation was also embraced by the diagnostics vendors who saw automation as a means of incorporating the analyzers purchased by their customers into larger systems in which the benefits of automation were integrated to the analyzers.This report reviews the options that are available to laboratory customers. These options include so called task-targeted automation-modules that range from single function devices that automate single tasks (e.g., decapping or aliquoting) to multifunction workstations that incorporate several of the functions of a laboratory sample processing department. The options also include total laboratory automation systems that use conveyors to link sample processing functions to analyzers and often include postanalytical features such as refrigerated storage and sample retrieval.Most importantly, this report reviews a recommended process for evaluating the need for new automation and for identifying the specific requirements of a laboratory and developing solutions that can meet those requirements. The report also discusses some of the practical considerations facing a laboratory in a new implementation and reviews the concept of machine vision to replace human inspections. © 2017 American Association for Clinical Chemistry.

  7. A Self-Paced Physical Geology Laboratory.

    ERIC Educational Resources Information Center

    Watson, Donald W.

    1983-01-01

    Describes a self-paced geology course utilizing a diversity of instructional techniques, including maps, models, samples, audio-visual materials, and a locally developed laboratory manual. Mechanical features are laboratory exercises, followed by unit quizzes; quizzes are repeated until the desired level of competence is attained. (Author/JN)

  8. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR BATCHING OF LABORATORY DATA (UA-C-7.0)

    EPA Science Inventory

    The purpose of this SOP is to describe the steps involved in batching the physical laboratory data forms generated by the Arizona Border Study and slated for data entry. It applies to all physical laboratory data forms entered for this study. This procedure was followed to ensu...

  9. Higher Education Finance Manual. Technical Report No. 53. Field Review Edition.

    ERIC Educational Resources Information Center

    Collier, Douglas J.

    The primary goal of the Higher Education Finance Manual project is to assist in higher education decisionmaking as it relates to the need for and the use of financial information. The objectives of this manual are to: (1) provide uniform definitions and procedures for displaying and reporting those financial data used most often in higher…

  10. Guide for preparing active solar heating systems operation and maintenance manuals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-01-01

    This book presents a systematic and standardized approach to the preparation of operation and maintenance manuals for active solar heating systems. Provides an industry consensus of the best operating and maintenance procedures for large commercial-scale solar service water and space heating systems. A sample O M manual is included. 3-ring binder included.

  11. Robotics: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

    ERIC Educational Resources Information Center

    Auer, Herbert J.

    This instructional manual contains 20 learning activity packets for use in a workshop on robotics. The lessons cover the following topics: safety considerations in robotics; introduction to technology-level and coordinate-systems categories; the teach pendant (a hand-held computer, usually attached to the robot controller, with which the operator…

  12. Extended Development Procedure EDeP Advanced Reference Manual.

    DTIC Science & Technology

    1982-11-01

    approach or combination of approaches. * The necessary mtials might include job aides on peer tutoring procedures, flashcards , lesson materials, etc. * The...should be suitable for one-to-one use. * A special form of a particular medium may be necessary, such as flashcards instead of printed text materials...to read, or holding a flashcard with a math problem on it indicates that the learner should solve the problem. Coaching: - A procedure can be devised

  13. Public Affairs Manual. Revised 1976 Edition.

    ERIC Educational Resources Information Center

    American Alliance for Health, Physical Education, and Recreation, Washington, DC.

    This public affairs manual is designed for health, physical education, and recreation personnel. It begins with a position statement by the American Alliance for Health, Physical Education, and Recreation (AAHPER). In section two, resources and procedures for crises action at the local and state level are discussed. Several organizational models…

  14. Industrial Electronics II for ICT. Student's Manual.

    ERIC Educational Resources Information Center

    Snider, Bob

    This student manual contains the following six units for classroom and laboratory experiences in high school industrial electronics: (1) introduction and review of DC and AC circuits; (2) semiconductors; (3) integrated circuits; (4) digital basics; (5) complex digital circuits; and (6) computer circuits. The units include unit objectives, specific…

  15. Shared Programs between Adjacent School Districts in Bordering States: A Planning Manual.

    ERIC Educational Resources Information Center

    Bruss, Lyle R.; Bryan, Dennis L.

    Specifically organized for the use of school districts that are located adjacent to each other but across state lines, this manual provides guidelines and procedures for determining the feasibility of sharing services across those state boundaries. The activities specified in the manual utilize school district information that is readily…

  16. Assessing Inquiry in Physical Geology Laboratory Manuals

    ERIC Educational Resources Information Center

    Ryker, Katherine D.; McConnell, David A.

    2017-01-01

    Many agencies, organizations, and researchers have called for the incorporation of inquiry-based learning in college classrooms. Providing inquiry-based activities in laboratory courses is one way to promote reformed, student-centered teaching in introductory geoscience courses. However, the literature on inquiry has relatively few geoscience…

  17. The recording of student performance in the microbiology laboratory as a training, tutorial, and motivational tool.

    PubMed

    Lipson, Steven M; Gair, Marina

    2011-01-01

    The laboratory component of a microbiology course consists of exercises which mandate a level of proficiency and manual dexterity equal to and often beyond that recognized among other biology courses. Bacterial growth, maintenance, identification (e.g., Gram stain, biochemical tests, genomics), as well as the continuous need to maintain laboratory safety and sterile technique, are only a few skills/responsibilities critical to the discipline of microbiology. Performance of the Gram stain remains one of the most basic and pivotal skills that must be mastered in the microbiology laboratory. However, a number of students continually have difficulty executing the Gram stain and preparative procedures associated with the test. In order to address this issue, we incorporated real-time digital recording as a supplemental teaching aid in the microbiology laboratory. Our use of the digital movie camera in the teaching setting served to enhance interest, motivate students, and in general, improve student performance.

  18. A Manual Control Test for the Detection and Deterrence of Impaired Drivers

    NASA Technical Reports Server (NTRS)

    Stein, A. C.; Allen, R. W.; Jex, H. R.

    1984-01-01

    A brief manual control test and a decision strategy were developed, laboratory tested, and field validated which provide a means for detecting human operator impairment from alcohol or other drugs. The test requires the operator to stabilize progressively unstable controlled element dynamics. Control theory and experimental data verify that the human operator's control ability on this task is constrained by basic cybernetic characteristics, and that task performance is reliably affected by impairment effects on these characteristics. Assessment of human operator control ability is determined by a statistically based decision strategy. The operator is allowed several chances to exceed a preset pass criterion. Procedures are described for setting the pass criterion based on individual ability and a desired unimpaired failure rate. These procedures were field tested with apparatus installed in automobiles that were designed to discourage drunk drivers from operating their vehicles. This test program demonstrated that the control task and detection strategy could be applied in a practical setting to screen human operators for impairment in their basic cybernetic skills.

  19. The Weatherization Assistant User's Manual (Version 8.9)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gettings, Michael B.; Malhotra, Mini; Ternes, Mark P.

    The Weatherization Assistant is a Windows-based energy audit software tool that was developed by Oak Ridge National Laboratory (ORNL) to help states and their local weatherization agencies implement the U.S. Department of Energy (DOE) Weatherization Assistance Program. The Weatherization Assistant is an umbrella program for two individual energy audits or measure selection programs: the National Energy Audit Tool (NEAT) for site-built single-family homes and the Manufactured Home Energy Audit (MHEA) for mobile homes. The Weatherization Assistant User's Manual documents the operation of the user interface for Version 8.9 of the software. This includes how to install and setup the software,more » navigate through the program, and initiate an energy audit. All of the user interface forms associated with the software and the data fields on these forms are described in detail. The manual is intended to be a training manual for new users of the Weatherization Assistant and as a reference manual for experienced users.« less

  20. Sampling large landscapes with small-scale stratification-User's Manual

    USGS Publications Warehouse

    Bart, Jonathan

    2011-01-01

    This manual explains procedures for partitioning a large landscape into plots, assigning the plots to strata, and selecting plots in each stratum to be surveyed. These steps are referred to as the "sampling large landscapes (SLL) process." We assume that users of the manual have a moderate knowledge of ArcGIS and Microsoft ® Excel. The manual is written for a single user but in many cases, some steps will be carried out by a biologist designing the survey and some steps will be carried out by a quantitative assistant. Thus, the manual essentially may be passed back and forth between these users. The SLL process primarily has been used to survey birds, and we refer to birds as subjects of the counts. The process, however, could be used to count any objects. ®

  1. Guatemala’s Ministry of Health Rapid Response Team Manuals

    PubMed Central

    Hernandez, Luis; Hanson, Kimberly M.; Martel, Lise D.

    2017-01-01

    The function of public health rapid response teams (RRTs) is to quickly identify, investigate, and control an outbreak before it can spread. The Central America Regional Office in Guatemala provided assistance to the Guatemalan Ministry of Health and Social Assistance (MSPAS) to develop RRT manuals at the district and regional levels. The manuals are divided into 4 sections: background, activity lists, standard operating procedures, and annexes. The manuals outline Guatemala’s RRT members’ responsibilities and will be tested in the near future through tabletop exercises. The development of the manuals is a concrete and significant step toward the attainment of Guatemala’s IHR goals and should be integrated into a larger emergency management system to promote “a world safe and secure from global health threats posed by infectious diseases.” PMID:25254918

  2. FDA Bacteriological Analytical Manual, Chapter 10, 2003: Listeria monocytogenes

    EPA Pesticide Factsheets

    FDA Bacteriological Analytical Manual, Chapter 10 describes procedures for analysis of food samples and may be adapted for assessment of solid, particulate, aerosol, liquid and water samples containing Listeria monocytogenes.

  3. Surgical manual of the Korean Gynecologic Oncology Group: classification of hysterectomy and lymphadenectomy

    PubMed Central

    Choi, Chel Hun; Chun, Yi Kyeong

    2017-01-01

    The Surgery Treatment Modality Committee of the Korean Gynecologic Oncologic Group (KGOG) has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we focused on radical hysterectomy and lymphadenectomy, and we developed a KGOG classification for those conditions. PMID:27670259

  4. Surgical manual of the Korean Gynecologic Oncology Group: classification of hysterectomy and lymphadenectomy.

    PubMed

    Lee, Maria; Choi, Chel Hun; Chun, Yi Kyeong; Kim, Yun Hwan; Lee, Kwang Beom; Lee, Shin Wha; Shim, Seung Hyuk; Song, Yong Jung; Roh, Ju Won; Chang, Suk Joon; Lee, Jong Min

    2017-01-01

    The Surgery Treatment Modality Committee of the Korean Gynecologic Oncologic Group (KGOG) has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we focused on radical hysterectomy and lymphadenectomy, and we developed a KGOG classification for those conditions.

  5. Stabilization Pond Operation and Maintenance Manual.

    ERIC Educational Resources Information Center

    Sexauer, Willard N.; Karn, Roger V.

    This manual provides the waste stabilization pond operator with the basics necessary for the treatment of wastewater in stabilization ponds. The material is organized as a comprehensive guide that follows the normal operation and maintenance procedures from the time the wastewater enters the left station until it leaves the pond. A comprehensive…

  6. Analytical methods of the U.S. Geological Survey's New York District Water-Analysis Laboratory

    USGS Publications Warehouse

    Lawrence, Gregory B.; Lincoln, Tricia A.; Horan-Ross, Debra A.; Olson, Mark L.; Waldron, Laura A.

    1995-01-01

    The New York District of the U.S. Geological Survey (USGS) in Troy, N.Y., operates a water-analysis laboratory for USGS watershed-research projects in the Northeast that require analyses of precipitation and of dilute surface water and soil water for major ions; it also provides analyses of certain chemical constituents in soils and soil gas samples.This report presents the methods for chemical analyses of water samples, soil-water samples, and soil-gas samples collected in wateshed-research projects. The introduction describes the general materials and technicques for each method and explains the USGS quality-assurance program and data-management procedures; it also explains the use of cross reference to the three most commonly used methods manuals for analysis of dilute waters. The body of the report describes the analytical procedures for (1) solution analysis, (2) soil analysis, and (3) soil-gas analysis. The methods are presented in alphabetical order by constituent. The method for each constituent is preceded by (1) reference codes for pertinent sections of the three manuals mentioned above, (2) a list of the method's applications, and (3) a summary of the procedure. The methods section for each constitutent contains the following categories: instrumentation and equipment, sample preservation and storage, reagents and standards, analytical procedures, quality control, maintenance, interferences, safety considerations, and references. Sufficient information is presented for each method to allow the resulting data to be appropriately used in environmental investigations.

  7. Ground Software Maintenance Facility (GSMF) user's manual

    NASA Technical Reports Server (NTRS)

    Aquila, V.; Derrig, D.; Griffith, G.

    1986-01-01

    Instructions for the Ground Software Maintenance Facility (GSMF) system user is provided to operate the GSMF in all modes. The GSMF provides the resources for the Automatic Test Equipment (ATE) computer program maintenance (GCOS and GOAL). Applicable reference documents are listed. An operational overview and descriptions of the modes in terms of operator interface, options, equipment, material utilization, and operational procedures are contained. Test restart procedures are described. The GSMF documentation tree is presented including the user manual.

  8. COMET-AR User's Manual: COmputational MEchanics Testbed with Adaptive Refinement

    NASA Technical Reports Server (NTRS)

    Moas, E. (Editor)

    1997-01-01

    The COMET-AR User's Manual provides a reference manual for the Computational Structural Mechanics Testbed with Adaptive Refinement (COMET-AR), a software system developed jointly by Lockheed Palo Alto Research Laboratory and NASA Langley Research Center under contract NAS1-18444. The COMET-AR system is an extended version of an earlier finite element based structural analysis system called COMET, also developed by Lockheed and NASA. The primary extensions are the adaptive mesh refinement capabilities and a new "object-like" database interface that makes COMET-AR easier to extend further. This User's Manual provides a detailed description of the user interface to COMET-AR from the viewpoint of a structural analyst.

  9. Establishment of National Laboratory Standards in Public and Private Hospital Laboratories

    PubMed Central

    ANJARANI, Soghra; SAFADEL, Nooshafarin; DAHIM, Parisa; AMINI, Rana; MAHDAVI, Saeed; MIRAB SAMIEE, Siamak

    2013-01-01

    In September 2007 national standard manual was finalized and officially announced as the minimal quality requirements for all medical laboratories in the country. Apart from auditing laboratories, Reference Health Laboratory has performed benchmarking auditing of medical laboratory network (surveys) in provinces. 12th benchmarks performed in Tehran and Alborz provinces, Iran in 2010 in three stages. We tried to compare different processes, their quality and accordance with national standard measures between public and private hospital laboratories. The assessment tool was a standardized checklist consists of 164 questions. Analyzing process show although in most cases implementing the standard requirements are more prominent in private laboratories, there is still a long way to complete fulfillment of requirements, and it takes a lot of effort. Differences between laboratories in public and private sectors especially in laboratory personnel and management process are significant. Probably lack of motivation, plays a key role in obtaining less desirable results in laboratories in public sectors. PMID:23514840

  10. Teaching Biology to Visually Handicapped Students. Resource Manual.

    ERIC Educational Resources Information Center

    Ricker, Kenneth S.

    This resource manual presents numerous techniques for adapting science activities to the visually handicapped student, applicable to introductory biology courses in which microscopes are used extensively in the laboratory. Chapters include information on the following: alternative microscopic viewing techniques, physical models, tactile diagrams,…

  11. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR LABORATORY ASSISTANT TRAINING PLAN--GENERAL (UA-T-6.0)

    EPA Science Inventory

    The purpose of this SOP is to describe the training sequence of incoming student laboratory assistants. The procedure is designed to provide them with an overview of the project in terms of project goals, structure, and laboratory needs. This overview familiarizes the student l...

  12. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of inorganic and organic constituents in water and fluvial sediments

    USGS Publications Warehouse

    Fishman, M. J.

    1993-01-01

    Methods to be used to analyze samples of water, suspended sediment and bottom material for their content of inorganic and organic constituents are presented. Technology continually changes, and so this laboratory manual includes new and revised methods for determining the concentration of dissolved constituents in water, whole water recoverable constituents in water-suspended sediment samples, and recoverable concentration of constit- uents in bottom material. For each method, the general topics covered are the application, the principle of the method, interferences, the apparatus and reagents required, a detailed description of the analytical procedure, reporting results, units and significant figures, and analytical precision data. Included in this manual are 30 methods.

  13. Conservative treatment of torn medial meniscus via mechanical force, manually assisted short lever chiropractic adjusting procedures.

    PubMed

    Polkinghorn, B S

    1994-09-01

    To present the first reported case of successful chiropractic intervention in treatment of a torn medial meniscus of the knee, the meniscal tear being documented by magnetic resonance imaging (MRI). A 54-yr-old woman complaining of right knee pain of several months' duration with accompanying marked functional impairment was diagnosed as having a tear in the posterior horn of the ipsilateral medial meniscus, verified by MRI studies of the same. Independent consultation with three medical specialists resulted in the unanimous decision that surgical intervention for the purpose of meniscectomy provided the only therapeutic approach indicated for the problem. However, the patient was reticent to undergo said surgical procedure and chose, instead, to utilize chiropractic care and conservative management in an effort to resolve her condition without having to resort to surgery. The patient received chiropractic treatment to the knee via mechanical force, manually assisted short lever chiropractic adjusting procedures (MFMA) utilizing an Activator Adjusting Instrument. Auxiliary treatment included the use of homeopathic therapy as an adjunct to chiropractic care. Said treatment resulted in a complete resolution of the patient's disability, the patient recovering full function of the knee joint and achieving an asymptomatic status without having to submit to surgical intervention and its possible adverse sequelae. Conservative management of meniscal tears via chiropractic treatment may provide a therapeutically effective and financially cost containing alternative to routine meniscectomy in certain cases involving torn medial menisci of the knee.

  14. Plant Biotech Lab Manual.

    ERIC Educational Resources Information Center

    Tant, Carl

    This book provides laboratory experiments to enhance any food science/botany curriculum. Chapter 1, "Introduction," presents a survey of the techniques used in plant biotechnology laboratory procedures. Chapter 2, "Micronutrition," discusses media and nutritional requirements for tissue culture studies. Chapter 3, "Sterile Seeds," focuses on the…

  15. 33 CFR 203.51 - Levee owner's manual.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...

  16. 33 CFR 203.51 - Levee owner's manual.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...

  17. 33 CFR 203.51 - Levee owner's manual.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...

  18. 33 CFR 203.51 - Levee owner's manual.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...

  19. 33 CFR 203.51 - Levee owner's manual.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...

  20. Analytical Methods for Trace Metals. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This training manual presents material on the theoretical concepts involved in the methods listed in the Federal Register as approved for determination of trace metals. Emphasis is on laboratory operations. This course is intended for chemists and technicians with little or no experience in analytical methods for trace metals. Students should have…

  1. 18 CFR 401.84 - Hearing procedure.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Hearing procedure. 401.84 Section 401.84 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Administrative and Other Hearings § 401.84 Hearing...

  2. 49 CFR 383.131 - Test procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... provide standardized scoring sheets for the skills tests, as well as standardized driving instructions for... 49 Transportation 5 2010-10-01 2010-10-01 false Test procedures. 383.131 Section 383.131... STANDARDS; REQUIREMENTS AND PENALTIES Tests § 383.131 Test procedures. (a) Driver information manuals...

  3. Pre-analytical issues in the haemostasis laboratory: guidance for the clinical laboratories.

    PubMed

    Magnette, A; Chatelain, M; Chatelain, B; Ten Cate, H; Mullier, F

    2016-01-01

    Ensuring quality has become a daily requirement in laboratories. In haemostasis, even more than in other disciplines of biology, quality is determined by a pre-analytical step that encompasses all procedures, starting with the formulation of the medical question, and includes patient preparation, sample collection, handling, transportation, processing, and storage until time of analysis. This step, based on a variety of manual activities, is the most vulnerable part of the total testing process and is a major component of the reliability and validity of results in haemostasis and constitutes the most important source of erroneous or un-interpretable results. Pre-analytical errors may occur throughout the testing process and arise from unsuitable, inappropriate or wrongly handled procedures. Problems may arise during the collection of blood specimens such as misidentification of the sample, use of inadequate devices or needles, incorrect order of draw, prolonged tourniquet placing, unsuccessful attempts to locate the vein, incorrect use of additive tubes, collection of unsuitable samples for quality or quantity, inappropriate mixing of a sample, etc. Some factors can alter the result of a sample constituent after collection during transportation, preparation and storage. Laboratory errors can often have serious adverse consequences. Lack of standardized procedures for sample collection accounts for most of the errors encountered within the total testing process. They can also have clinical consequences as well as a significant impact on patient care, especially those related to specialized tests as these are often considered as "diagnostic". Controlling pre-analytical variables is critical since this has a direct influence on the quality of results and on their clinical reliability. The accurate standardization of the pre-analytical phase is of pivotal importance for achieving reliable results of coagulation tests and should reduce the side effects of the influence

  4. Identification of potential neuromotor mechanisms of manual therapy in patients with musculoskeletal disablement: rationale and description of a clinical trial.

    PubMed

    Fisher, Beth E; Davenport, Todd E; Kulig, Kornelia; Wu, Allan D

    2009-05-21

    Many health care practitioners use a variety of hands-on treatments to improve symptoms and disablement in patients with musculoskeletal pathology.Research to date indirectly suggests a potentially broad effect of manual therapy on the neuromotor processing of functional behavior within the supraspinal central nervous system (CNS) in a manner that may be independent of modification at the level of local spinal circuits. However, the effect of treatment speed, as well as the specific mechanism and locus of CNS changes, remain unclear. We developed a placebo-controlled, randomized study to test the hypothesis that manual therapy procedures directed to the talocrural joint in individuals with post-acute ankle sprain induce a change in corticospinal excitability that is relevant to improve the performance of lower extremity functional behavior. This study is designed to identify potential neuromotor changes associated with manual therapy procedures directed to the appendicular skeleton, compare the relative effect of treatment speed on potential neuromotor effects of manual therapy procedures, and determine the behavioral relevance of potential neuromotor effects of manual therapy procedures. http://www.clinicaltrials.gov identifier NCT00847769.

  5. [Establishment of a microbiology laboratory open 365 days a year and its impact].

    PubMed

    Komori, Toshiaki; Fujita, Naohisa; Hirose, Yuri; Kimura, Takeshi; Kyotani, Noriko; Kurahashi, Satoko; Yamada, Yukiji; Ushiyama, Masaji; Yasumoto, Towa; Yuasa, Soh-Ichi

    2009-12-01

    The microbiology laboratory of our university hospital aims to provide accurate and rapid microbiological results and useful information for healthcare workers involved in both the treatment of infectious diseases and infection control. For this purpose, we have been running a microbiology laboratory open 365 days a year since 2005. Before starting this laboratory, we formulated both a precise procedural manual and educational program to increase the number of microbiological technologists from 4 to 8 persons and improve their skills. Moreover, we reviewed the reporting system. As a result, we could report positive blood cultures up to 1.4 days earlier than previously possible, and significantly improved the prognosis of MRSA bacteremia patients by the early treatment of anti-MRSA antimicrobials within 48 hours after positive blood culture. In addition, the rate of MRSA/Staphylococcus aureus decreased to 35.8%. It is essential for the treatment of infectious diseases and infection control to accept only appropriate specimens and report the results rapidly and accurately.

  6. Intradiscal Pressure Changes during Manual Cervical Distraction: A Cadaveric Study

    PubMed Central

    Gudavalli, M. R.; Potluri, T.; Carandang, G.; Havey, R. M.; Voronov, L. I.; Cox, J. M.; Rowell, R. M.; Kruse, R. A.; Joachim, G. C.; Patwardhan, A. G.; Henderson, C. N. R.; Goertz, C.

    2013-01-01

    The objective of this study was to measure intradiscal pressure (IDP) changes in the lower cervical spine during a manual cervical distraction (MCD) procedure. Incisions were made anteriorly, and pressure transducers were inserted into each nucleus at lower cervical discs. Four skilled doctors of chiropractic (DCs) performed MCD procedure on nine specimens in prone position with contacts at C5 or at C6 vertebrae with the headpiece in different positions. IDP changes, traction forces, and manually applied posterior-to-anterior forces were analyzed using descriptive statistics. IDP decreases were observed during MCD procedure at all lower cervical levels C4-C5, C5-C6, and C6-C7. The mean IDP decreases were as high as 168.7 KPa. Mean traction forces were as high as 119.2 N. Posterior-to-anterior forces applied during manual traction were as high as 82.6 N. Intraclinician reliability for IDP decrease was high for all four DCs. While two DCs had high intraclinician reliability for applied traction force, the other two DCs demonstrated only moderate reliability. IDP decreases were greatest during moving flexion and traction. They were progressevely less pronouced with neutral traction, fixed flexion and traction, and generalized traction. PMID:24023587

  7. Biomedical Science, Unit IV: The Nervous System in Health and Medicine. The Nervous System; Disorders of the Brain and Nervous System; Application of Computer Science to Diagnosis; Drugs and Pharmacology; The Human Senses; Electricity. Laboratory Manual. Revised Version, 1976.

    ERIC Educational Resources Information Center

    Biomedical Interdisciplinary Curriculum Project, Berkeley, CA.

    Designed to accompany the student text on the nervous system, this manual presents laboratory activities dealing with concepts presented in the text. Thirty-seven activities are described. Four supplementary activities dealing with concepts in electricity are also included. Laboratory activities are divided into several parts, each part covering a…

  8. Automation of laboratory testing for infectious diseases using the polymerase chain reaction-- our past, our present, our future.

    PubMed

    Jungkind, D

    2001-01-01

    While it is an extremely powerful and versatile assay method, polymerase chain reaction (PCR) can be a labor-intensive process. Since the advent of commercial test kits from Roche and the semi-automated microwell Amplicor system, PCR has become an increasingly useful and widespread clinical tool. However, more widespread acceptance of molecular testing will depend upon automation that allows molecular assays to enter the routine clinical laboratory. The forces driving the need for automated PCR are the requirements for diagnosis and treatment of chronic viral diseases, economic pressures to develop more automated and less expensive test procedures similar to those in the clinical chemistry laboratories, and a shortage in many areas of qualified laboratory personnel trained in the types of manual procedures used in past decades. The automated Roche COBAS AMPLICOR system has automated the amplification and detection process. Specimen preparation remains the most labor-intensive part of the PCR testing process, accounting for the majority of the hands-on-time in most of the assays. A new automated specimen preparation system, the COBAS AmpliPrep, was evaluated. The system automatically releases the target nucleic acid, captures the target with specific oligonucleotide probes, which become attached to magnetic beads via a biotin-streptavidin binding reaction. Once attached to the beads, the target is purified and concentrated automatically. Results of 298 qualitative and 57 quantitative samples representing a wide range of virus concentrations analyzed after the COBAS AmpliPrep and manual specimen preparation methods, showed that there was no significant difference in qualitative or quantitative hepatitis C virus (HCV) assay performance, respectively. The AmpliPrep instrument decreased the time required to prepare serum or plasma samples for HCV PCR to under 1 min per sample. This was a decrease of 76% compared to the manual specimen preparation method. Systems that

  9. How to maintain blood supply during computer network breakdown: a manual backup system.

    PubMed

    Zeiler, T; Slonka, J; Bürgi, H R; Kretschmer, V

    2000-12-01

    Electronic data management systems using computer network systems and client/server architecture are increasingly used in laboratories and transfusion services. Severe problems arise if there is no network access to the database server and critical functions are not available. We describe a manual backup system (MBS) developed to maintain the delivery of blood products to patients in a hospital transfusion service in case of a computer network breakdown. All data are kept on a central SQL database connected to peripheral workstations in a local area network (LAN). Request entry from wards is performed via machine-readable request forms containing self-adhesive specimen labels with barcodes for test tubes. Data entry occurs on-line by bidirectional automated systems or off-line manually. One of the workstations in the laboratory contains a second SQL database which is frequently and incrementally updated. This workstation is run as a stand-alone, read-only database if the central SQL database is not available. In case of a network breakdown, the time-graded MBS is launched. Patient data, requesting ward and ordered tests/requests, are photocopied through a template from the request forms on special MBS worksheets serving as laboratory journal for manual processing and result report (a copy is left in the laboratory). As soon as the network is running again the data from the off-line period are entered into the primary SQL server. The MBS was successfully used at several occasions. The documentation of a 90-min breakdown period is presented in detail. Additional work resulted from the copy work and the belated manual data entry after restoration of the system. There was no delay in issue of blood products or result reporting. The backup system described has been proven to be simple, quick and safe to maintain urgent blood supply and distribution of laboratory results in case of unexpected network breakdown.

  10. Automatized set-up procedure for transcranial magnetic stimulation protocols.

    PubMed

    Harquel, S; Diard, J; Raffin, E; Passera, B; Dall'Igna, G; Marendaz, C; David, O; Chauvin, A

    2017-06-01

    Transcranial Magnetic Stimulation (TMS) established itself as a powerful technique for probing and treating the human brain. Major technological evolutions, such as neuronavigation and robotized systems, have continuously increased the spatial reliability and reproducibility of TMS, by minimizing the influence of human and experimental factors. However, there is still a lack of efficient set-up procedure, which prevents the automation of TMS protocols. For example, the set-up procedure for defining the stimulation intensity specific to each subject is classically done manually by experienced practitioners, by assessing the motor cortical excitability level over the motor hotspot (HS) of a targeted muscle. This is time-consuming and introduces experimental variability. Therefore, we developed a probabilistic Bayesian model (AutoHS) that automatically identifies the HS position. Using virtual and real experiments, we compared the efficacy of the manual and automated procedures. AutoHS appeared to be more reproducible, faster, and at least as reliable as classical manual procedures. By combining AutoHS with robotized TMS and automated motor threshold estimation methods, our approach constitutes the first fully automated set-up procedure for TMS protocols. The use of this procedure decreases inter-experimenter variability while facilitating the handling of TMS protocols used for research and clinical routine. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Occupational and Physical Therapy Services, School Based Programs: An Organizational Manual, 1982-83.

    ERIC Educational Resources Information Center

    McKee, Marlene, Comp.; And Others

    A 1982-83 manual on school-based occupational therapy and physical therapy (OT/PT) services in Texas is presented. Contents include: guidelines, evaluation forms, student and therapists' documentation forms, and policy/procedures manuals for a suburban independent school district and a rural independent school district. Part I provides the…

  12. Reflectance Experiment Laboratory (RELAB) Description and User's Manual

    NASA Technical Reports Server (NTRS)

    Pieters, Carle M.; Hiroi, Takahiro; Pratt, Steve F.; Patterson, Bill

    2004-01-01

    Spectroscopic data acquired in the laboratory provide the interpretive foundation upon which compositional information about unexplored or unsampled planetary surfaces is derived from remotely obtained reflectance spectra. The RELAB is supported by NASA as a multi-user spectroscopy facility, and laboratory time can be made available at no charge to investigators who are in funded NASA programs. RELAB has two operational spectrometers available to NASA scientists: 1) a near- ultraviolet, visible, and near-infrared bidirectional spectrometer and 2) a near- and mid- infrared FT-IR spectrometer. The overall purpose of the design and operation of the RELAB bidirectional spectrometer is to obtain high precision, high spectral resolution, bidirectional reflectance spectra of earth and planetary materials. One of the key elements of its design is the ability to measure samples using viewing geometries specified by the user. This allows investigators to simulate, under laboratory conditions, reflectance spectra obtained remotely (i.e., with spaceborne, telescopic, and airborne systems) as well as to investigate geometry dependent reflectance properties of geologic materials. The Nicolet 740 FT-IR spectrometer currently operates in reflectance mode from 0.9 to 25 Fm. Use and scheduling of the RELAB is monitored by a 4-member advisory committee. NASA investigators should direct inquiries to the Science Manager or RELAB Operator.

  13. Opticalman 3 and 2, Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Personnel Program Support Activity, Washington, DC.

    Theories and practical skills for use in optical shops are presented in this rate training manual, prepared for regular navy and naval reserve personnel. Light theories are analyzed in connection with mirrors, prisms, lenses, and basic optical systems. Following fundamentals of mechanical design and construction, maintenance procedures are studied…

  14. PROCESS DESIGN MANUAL: LAND TREATMENT OF MUNICIPAL WASTEWATER

    EPA Science Inventory

    The manual presents a rational procedure for the design of land treatment systems. Slow rate, rapid infiltration, and overland flow processes for the treatment of municipal wastewaters are discussed in detail, and the design concepts and criteria are presented. A two-phased plann...

  15. User's manual for a material transport code on the Octopus Computer Network

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Naymik, T.G.; Mendez, G.D.

    1978-09-15

    A code to simulate material transport through porous media was developed at Oak Ridge National Laboratory. This code has been modified and adapted for use at Lawrence Livermore Laboratory. This manual, in conjunction with report ORNL-4928, explains the input, output, and execution of the code on the Octopus Computer Network.

  16. Training Manual on Food Irradiation Technology and Techniques.

    ERIC Educational Resources Information Center

    United Nations Food and Agriculture Organization, Rome (Italy).

    This training manual consists of two parts. The first covers general information and outlines various applications of food irradiation technology. The second section details laboratory exercises used to demonstrate the principles of radiation processing and the effects of radiation treatment on certain types of food. The chapters outline…

  17. MFCVs (Manual Flow Control Valves) in the Lab

    NASA Image and Video Library

    2009-07-07

    ISS020-E-017705 (7 July 2009) --- NASA astronaut Michael Barratt, Expedition 20 flight engineer, works at a rotated rack in the Destiny laboratory of the International Space Station during in-flight maintenance (IFM) to adjust the periodic flow rate of manual flow control valves for coolant loops.

  18. MFCVs (Manual Flow Control Valves) in the Lab

    NASA Image and Video Library

    2009-07-07

    ISS020-E-017710 (7 July 2009) --- NASA astronaut Michael Barratt, Expedition 20 flight engineer, works at a rotated rack in the Destiny laboratory of the International Space Station during in-flight maintenance (IFM) to adjust the periodic flow rate of manual flow control valves for coolant loops.

  19. Laboratory Activities for Life Span Motor Development.

    ERIC Educational Resources Information Center

    Haywood, Kathleen M.

    This manual describes motor development laboratory activities to help future physical education teachers observe, assess, measure, and test students' motor skills. A total of 20 laboratory activities are described under five sections geared toward: (1) physical growth and maturation; (2) assessing early motor development; (3) assessing basic motor…

  20. International Labour Standards. A Workers' Education Manual.

    ERIC Educational Resources Information Center

    International Labour Office, Geneva (Switzerland).

    Concerned with the standard-setting work of the International Labor Organization (ILO), this manual is chiefly intended to provide guidance for worker's education instructors and trade union officials. It contains nine chapters: (1) the ILO origins and history are traced and the structure is explained; (2 & 3) procedures for the origination…