Sample records for large diameter refinery

  1. Oil refinery dusts: morphological and size analysis by TEM.

    PubMed

    Sielicki, Przemysław; Janik, Helena; Guzman, Agnieszka; Broniszewski, Mieczysław; Namieśnik, Jacek

    2011-03-01

    The objectives of this work were to develop a means of sampling atmospheric dusts on the premises of an oil refinery for electron microscopic study to carry out preliminary morphological analyses and to compare these dusts with those collected at sites beyond the refinery limits. Carbon and collodion membranes were used as a support for collection of dust particles straight on transmission electron microscopy (TEM) grids. Micrographs of the dust particles were taken at magnifications from ×4,000 to ×80,000 with a Tesla BS500 transmission electron microscope. Four parameters were defined on the basis of the micrographs: surface area, Feret diameter, circumference, and shape coefficient. The micrographs and literature data were used to classify the atmospheric dusts into six groups: particles with an irregular shape and rounded edges; particles with an irregular shape and sharp edges; soot and its aggregates; spherical particles; singly occurring, ultrafine dust particles; and particles not allocated to any of the previous five groups. The types of dusts found in all the samples were similar, although differences did exist between the various morphological parameters. Dust particles with the largest Feret diameter were present in sample 3 (mean, 0.739 μm)-these were collected near the refinery's effluent treatment plant. The particles with the smallest diameter were found in the sample that had been intended to be a reference sample for the remaining results (mean, 0.326 μm). The dust particles collected in the refinery had larger mean Feret diameters, even 100% larger, than those collected beyond it. Particles with diameters from 0.1 to 0.2 μm made up the most numerous group in all the samples collected in the refinery.

  2. 76 FR 39852 - Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Over 41/2

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... by refineries, petrochemical plants, and chemical plants, as well as in power generation plants and... it sell any subject merchandise to any trading company with the knowledge that the trading company... during the POR. In its response, JFE explained in detail how its claim of no knowledge is supported by...

  3. Smoking habits of oil refinery employees.

    PubMed Central

    Van Peenen, P F; Blanchard, A G; Wolkonsky, P M

    1984-01-01

    Smoking habits of White male employees of a large oil company were analyzed. There were only slight differences in smoking habits between refinery and nonrefinery employees. Salaried employees, both at refineries and elsewhere, smoked much less than hourly employees. PMID:6507698

  4. 40 CFR 80.555 - What provisions are available to a large refiner that acquires a small refiner or one or more of...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... large refiner that acquires a small refiner or one or more of its refineries? 80.555 Section 80.555... that acquires a small refiner or one or more of its refineries? (a) In the case of a refiner without approved small refiner status who acquires a refinery from a refiner with approved status as a motor...

  5. A Long-Term United States’ Energy Policy Without Venezuelan Oil

    DTIC Science & Technology

    2009-04-01

    a large majority of petrochemical plants and refineries are located. 65 The U.S. 13 refinery capacity is expected to increase from 16.9 mbd in...increased oil production. The majority of U.S. oil refineries that normally received Venezuelan oil were supplanted with Mexican Maya, Brazil, and West...The effect on the U.S. would be especially felt since its oil refineries would experience higher transportation costs by importing oil from countries

  6. Chemical composition of individual aerosol particles from working areas in a nickel refinery.

    PubMed

    Höflich, B L; Wentzel, M; Ortner, H M; Weinbruch, S; Skogstad, A; Hetland, S; Thomassen, Y; Chaschin, V P; Nieboer, E

    2000-06-01

    Individual aerosol particles (n = 1170) collected at work stations in a nickel refinery were analyzed by wavelength-dispersive electron-probe microanalysis. By placing arbitrary restrictions on the contents of sulfur and silicon, the particles could be divided into four main groups. Scanning electron images indicated that most of the particles examined were relatively small (< or = 2 microm, equivalent projected area diameter), and that their morphology suggested formation from a melt. There was an absence of well-defined phases and simple stoichiometries, indicating that exposures to pure substances such as nickel subsulfide or specific oxides appeared not to occur. Although the elemental composition of particles varied greatly, a rough association was evident with the known elemental content of the refinery intermediates. The implications of the findings for aerosol speciation measurements, toxicological studies and interpretation of adverse health effects are explored.

  7. Conflicting energy and environmental policies: The portsmouth oil refinery

    NASA Astrophysics Data System (ADS)

    Choi, Yearn Hong

    1984-03-01

    This case study presents the series of decision-making processes surrounding a current environmental issue—the Portsmouth oil refinery in Virginia. Crude oil must be refined before it can be used as fuel. Additionally, some oil must be desulfurized for use other than as gasoline. In 1977, the nation imported about one million barrels of oil a day. Although the US Department of Energy has emphasized the critical need for greater east coast refinery capability, the east coast is to supply only 25% of its refined oil needs. In the same year, the east coast met its demands for petroleum products from three sources: (a) refinery production, 22.7%, (b) product imports, 28.0%, and (c) products from the Gulf Coast, 49.3%.1 The energy program after the Arab oil embargo has an objective of encouraging the construction of oil refineries and petrochemical plants in the United States rather than abroad. The tariff is higher on imports of refined oil products than of crude oil, and new refineries are allowed to import a large proportion of their requirements tarifffree. The US federal government does not directly regulate the locations for oil refineries or methods of desulfurization. The oil import program, however, does influence decisions concerning location of desulfurization facilities and refineries, and air and water pollution standards affect methods of refining, besides making desulfurization necessary.

  8. A mesostructured Y zeolite as a superior FCC catalyst--lab to refinery.

    PubMed

    García-Martínez, Javier; Li, Kunhao; Krishnaiah, Gautham

    2012-12-18

    A mesostructured Y zeolite was prepared by a surfactant-templated process at the commercial scale and tested in a refinery, showing superior hydrothermal stability and catalytic cracking selectivity, which demonstrates, for the first time, the promising future of mesoporous zeolites in large scale industrial applications.

  9. Characterization of fast-pyrolysis bio-oil distillation residues and their potential applications

    USDA-ARS?s Scientific Manuscript database

    A typical petroleum refinery makes use of the vacuum gas oil by cracking the large molecular weight compounds into light fuel hydrocarbons. For various types of fast pyrolysis bio-oil, successful analogous methods for processing heavy fractions could expedite integration into a petroleum refinery fo...

  10. [Evaluation of the demographic situation in a town with oil refinery and chemical industries].

    PubMed

    Ovsiannikova, L B

    2001-01-01

    In recent years the problem of population health has been acquiring the character of a growing threat to national safety. This is grounded first of all on observation of changes in medical demographic indices, especially in ecologically disadvantaged regions among which are the Republic of Bashcortostan and its capital Ufa with large oil refinery and petrochemical enterprises. High population density and numerous oil refineries combined with the unfavorable meteoconditions are the factors of heavy pollution of the area with global and local ecotoxicants. Observations showed that the demographic situation had been turning tougher in urban, especially residential districts in the vicinity of refineries and petrochemical enterprises. Objective data were obtained indicative of aggravation of medical and genetic indices due to the chronically harmful environment, and socio-economic setback.

  11. A comparative assessment of resource efficiency in petroleum refining

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study weremore » incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.« less

  12. A Comparative Assessment of Resource Efficiency in Petroleum Refining

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Han, Jeongwoo; Forman, G; Elgowainy, Amgad

    2015-10-01

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study weremore » incorporated in Argonne National Laboratory's GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio. (c) 2015 Argonne National Laboratory. Published by Elsevier Ltd.« less

  13. A comparative assessment of resource efficiency in petroleum refining

    DOE PAGES

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad; ...

    2015-03-25

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study weremore » incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.« less

  14. Well-to-Wheels Greenhouse Gas Emission Analysis of High-Octane Fuels with Ethanol Blending: Phase II Analysis with Refinery Investment Options

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Han, Jeongwoo; Wang, Michael; Elgowainy, Amgad

    Higher-octane gasoline can enable increases in an internal combustion engine’s energy efficiency and a vehicle’s fuel economy by allowing an increase in the engine compression ratio and/or by enabling downspeeding and downsizing. Producing high-octane fuel (HOF) with the current level of ethanol blending (E10) could increase the energy and greenhouse gas (GHG) emissions intensity of the fuel product from refinery operations. Alternatively, increasing the ethanol blending level in final gasoline products could be a promising solution to HOF production because of the high octane rating and potentially low blended Reid vapor pressure (RVP) of ethanol at 25% and higher ofmore » the ethanol blending level by volume. In our previous HOF well-to-wheels (WTW) report (the so-called phase I report of the HOF WTW analysis), we conducted WTW analysis of HOF with different ethanol blending levels (i.e., E10, E25, and E40) and a range of vehicle efficiency gains with detailed petroleum refinery linear programming (LP) modeling by Jacobs Consultancy and showed that the overall WTW GHG emission changes associated with HOFVs were dominated by the positive impact associated with vehicle efficiency gains and ethanol blending levels, while the refining operations to produce gasoline blendstock for oxygenate blending (BOB) for various HOF blend levels had a much smaller impact on WTW GHG emissions (Han et al. 2015). The scope of the previous phase I study, however, was limited to evaluating PADDs 2 and 3 operation changes with various HOF market share scenarios and ethanol blending levels. Also, the study used three typical configuration models of refineries (cracking, light coking, and heavy coking) in each PADD, which may not be representative of the aggregate response of all refineries in each PADD to various ethanol blending levels and HOF market scenarios. Lastly, the phase I study assumed no new refinery expansion in the existing refineries, which limited E10 HOF production to the volume achievable by the cracking refinery configuration. To be able to satisfy large market demands of E10 HOF, that study arbitrarily relaxed the RVP requirements by replacing reformulated gasoline (RFG) RVP requirement of 7 psi in summer with conventional gasoline (CG) RVP requirement of 9 psi in summer. To examine the response by all refineries in major refinery regions, this phase II of the HOF WTW analysis employed regionally aggregated refinery models for the following six regions: PADDs 1, 2, 3, 4, and 5 excluding California (CA) and CA separately. Using aggregate refinery models, this phase II study examined the impacts of ethanol blending and HOF market shares on the refinery operations in these six regions. Also, this study included refinery expansion to produce a pre-determined HOF volume with 10% ethanol blending. In particular, this study examined several refinery expansion options using refinery configuration models to investigate a practical refinery response to the increase in E10 HOF market demand.« less

  15. Assessment and control design for steam vent noise in an oil refinery.

    PubMed

    Monazzam, Mohammad Reza; Golmohammadi, Rostam; Nourollahi, Maryam; Momen Bellah Fard, Samaneh

    2011-06-13

    Noise is one of the most important harmful agents in work environment. Noise pollution in oil refinery industries is related to workers' health. This study aimed to determine the overall noise pollution of an oil refinery operation and its frequency analysis to determine the control plan for a vent noise in these industries. This experimental study performed in control unit of Tehran Oil Refinery in 2008. To determine the noise distributions, environmental noise measurements were carried out by lattice method according to basic information and technical process. The sound pressure level and frequency distribution was measured for each study sources subject separately was performed individually. According to the vent's specification, the measured steam noise characteristics reviewed and compared to the theoretical results of steam noise estimation. Eventually, a double expansion muffler was designed. Data analysis and graphical design were carried out using Excel software. The results of environmental noise measurements indicated that the level of sound pressure was above the national permitted level (85 dB (A)). The Mean level of sound pressure of the studied steam jet was 90.3 dB (L). The results of noise frequency analysis for the steam vents showed that the dominant frequency was 4000 Hz. To obtain 17 dB noise reductions, a double chamber aluminum muffler with 500 mm length and 200 mm diameter consisting pipe drilled was designed. The characteristics of steam vent noise were separated from other sources, a double expansion muffler was designed using a new method based on the level of steam noise, and principle sound frequency, a double expansion muffler was designed.

  16. [Polycyclic aromatic hidrocarbons deposition in the Milazzo-Valle del Mela (Sicily Region, Southern Italy) high-risk area following an oil refinery fire].

    PubMed

    Grechi, Daniele; Biggeri, Annibale

    2016-01-01

    On September 2014, a fire began within an oil refinery involving a storage tank containing several hundreds of thousands cubic meters of virgin naphtha. Mayors of neighbouring municipalities asked the Epidemiology and Prevention Society "Giulio A. Maccacaro" to carry out an environmental survey in order to evaluate what was the nature and how dangerous was suspended dust deposited by the fumes. In the following days, after fire had been extinguished we conducted a sample survey on the presence of polycyclic aromatic hydrocarbons (PAH) and metals in particulate deposited on the soil on a radius of five kilometres from the refinery and we engaged the exposed population. The Milazzo-Valle del Mela (Sicily Region, Southern Italy) high-risk area includes several industrial plants; among them, an oil refinery and a fuel powered energy plant. As reference area we selected the Sarroch municipality (Sardinia Region, Southern Italy), in the coast of the Tyrrhenian Sea, which is geographically comparable, where a large oil refinery is located and where an environmental campaign with measurement of PAH and metals in particulate matter was ongoing. Qualitatively, metal composition of particulate matter resulted similar in the Sarroch and Milazzo samples. Instead, a large excess of PAH was documented in the Milazzo samples as compared to the Sarroch ones. In conclusion, the results of the analysis of the samples of particulate matter deposited in the Milazzo area in the days immediately following the oil refinery fire showed a high quantity of PAH, carcinogenic substances which pose major hazard to population health. The greater fall-out was registered in the proximity of the burnt storage tank and the West neighbourhood, and at lesser extent in the Southern neighbourhood. As a consequence, there was a population exposure to carcinogenic substances which could have reached the food chain.

  17. Sustainable Separations of C4‐Hydrocarbons by Using Microporous Materials

    PubMed Central

    Gehre, Mascha; Guo, Zhiyong; Rothenberg, Gadi

    2017-01-01

    Abstract Petrochemical refineries must separate hydrocarbon mixtures on a large scale for the production of fuels and chemicals. Typically, these hydrocarbons are separated by distillation, which is extremely energy intensive. This high energy cost can be mitigated by developing materials that can enable efficient adsorptive separation. In this critical review, the principles of adsorptive separation are outlined, and then the case for C4 separations by using zeolites and metal–organic frameworks (MOFs) is examined. By analyzing both experimental and theoretical studies, the challenges and opportunities in C4 separation are outlined, with a focus on the separation mechanisms and structure–selectivity correlations. Zeolites are commonly used as adsorbents and, in some cases, can separate C4 mixtures well. The pore sizes of eight‐membered‐ring zeolites, for example, are in the order of the kinetic diameters of C4 isomers. Although zeolites have the advantage of a rigid and highly stable structure, this is often difficult to functionalize. MOFs are attractive candidates for hydrocarbon separation because their pores can be tailored to optimize the adsorbate–adsorbent interactions. MOF‐5 and ZIF‐7 show promising results in separating all C4 isomers, but breakthrough experiments under industrial conditions are needed to confirm these results. Moreover, the flexibility of the MOF structures could hamper their application under industrial conditions. Adsorptive separation is a promising viable alternative and it is likely to play an increasingly important role in tomorrow's refineries. PMID:28621064

  18. Sustainable Separations of C4 -Hydrocarbons by Using Microporous Materials.

    PubMed

    Gehre, Mascha; Guo, Zhiyong; Rothenberg, Gadi; Tanase, Stefania

    2017-10-23

    Petrochemical refineries must separate hydrocarbon mixtures on a large scale for the production of fuels and chemicals. Typically, these hydrocarbons are separated by distillation, which is extremely energy intensive. This high energy cost can be mitigated by developing materials that can enable efficient adsorptive separation. In this critical review, the principles of adsorptive separation are outlined, and then the case for C 4 separations by using zeolites and metal-organic frameworks (MOFs) is examined. By analyzing both experimental and theoretical studies, the challenges and opportunities in C 4 separation are outlined, with a focus on the separation mechanisms and structure-selectivity correlations. Zeolites are commonly used as adsorbents and, in some cases, can separate C 4 mixtures well. The pore sizes of eight-membered-ring zeolites, for example, are in the order of the kinetic diameters of C 4 isomers. Although zeolites have the advantage of a rigid and highly stable structure, this is often difficult to functionalize. MOFs are attractive candidates for hydrocarbon separation because their pores can be tailored to optimize the adsorbate-adsorbent interactions. MOF-5 and ZIF-7 show promising results in separating all C 4 isomers, but breakthrough experiments under industrial conditions are needed to confirm these results. Moreover, the flexibility of the MOF structures could hamper their application under industrial conditions. Adsorptive separation is a promising viable alternative and it is likely to play an increasingly important role in tomorrow's refineries. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Soils as a Record of Anthropogenic Metal Inputs: From Susquehanna Shale Hills Critical Zone Observatory to Marietta, Ohio

    NASA Astrophysics Data System (ADS)

    Carter, M.; Herndon, E.; Brantley, S. L.

    2012-12-01

    Atmospheric deposition of metals emitted by anthropogenic activities has been a significant source of metal loading into soils in the United States for more than 200 years. Based on research at the Susquehanna Shale Hills CZO, we began investigating Mn inputs to soils in the northeastern U.S.A. from widespread atmospheric Mn emissions from steel manufacturers and coal-burning power plants. Total Mn inputs to Shale Hills soils at ridgetops are calculated to be 42 mg Mn/cm2. In order to more directly evaluate the link between Mn emissions and Mn enrichment in soils, we are now investigating soils around a ferromanganese refinery in Marietta, Ohio that is currently the largest emission source of manganese (Mn) into the atmosphere in the U.S.A. Particulate emissions during production are up to 31-34% percent manganese oxide (MnO) by weight. These particles range in diameter from 0.05 to 0.4 μm, making them both highly mobile and respirable. In order to assess the role of soils in Marietta as sinks for atmospherically-derived Mn, a series of soil cores have been collected from a range of distances (0.5 - 35 km) from the refinery. Mn is enriched at the soil surface up to 8 times above parent material composition sampled at 1 m depth near the source and decreases as a function of distance. Total mass of Mn added to soils per unit land area integrated over the soil depth core was calculated to be 50 mg Mn/cm2¬¬ near the refinery. In contrast, 10 mg Mn/cm2 was lost from the soil profile at a distance of 35 km from the facility. Enrichment of chromium (Cr) up to 3 times was also found in surface soils near the refinery, consistent with the production of ferrochromium at the Marietta plant. Further trace element analyses are being used to fingerprint atmospheric inputs from the refinery into the soil. Models of Mn addition to soils are also being developed and compared to known rates of emission.

  20. Microbial communities in the functional areas of a biofilm reactor with anaerobic-aerobic process for oily wastewater treatment.

    PubMed

    Li, Jianhua; Sun, Shanshan; Yan, Ping; Fang, Li; Yu, Yang; Xiang, Yangdong; Wang, Di; Gong, Yejing; Gong, Yanjun; Zhang, Zhongzhi

    2017-08-01

    Microbial communities in the functional areas of biofilm reactors with large height-diameter ratio using the anaerobic-aerobic (A/O) reflux process was investigated to treat heavy oil refinery wastewater without pretreatment. In the process, chemical oxygen demand (COD) and total nitrogen (TN) removal reached 93.2% and 82.8%, and the anaerobic biofilm reactor was responsible for 95% and 99%, respectively. Areas for hydrolysis acidification and acetic acid production, methane production, and COD recovery were obvious in the anaerobic reactor. Among all areas, area for hydrolysis acidification and acetic acid production was the key factor to improve COD removal efficiency. High throughput sequencing of 16S rDNA gene showed that the native community was mainly composed of functional groups for hydrocarbon degradation, syntrophic bacteria union body, methanogenesis, nitrification, denitrification, and sulfate reduction. The deviations between predicted values and actual COD and TN removal were less than 5% in the optimal prediction model. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. VOCs emission rate estimate for complicated industrial area source using an inverse-dispersion calculation method: A case study on a petroleum refinery in Northern China.

    PubMed

    Wei, Wei; Lv, Zhaofeng; Yang, Gan; Cheng, Shuiyuan; Li, Yue; Wang, Litao

    2016-11-01

    This study aimed to apply an inverse-dispersion calculation method (IDM) to estimate the emission rate of volatile organic compounds (VOCs) for the complicated industrial area sources, through a case study on a petroleum refinery in Northern China. The IDM was composed of on-site monitoring of ambient VOCs concentrations and meteorological parameters around the source, calculation of the relationship coefficient γ between the source's emission rate and the ambient VOCs concentration by the ISC3 model, and estimation of the actual VOCs emission rate from the source. Targeting the studied refinery, 10 tests and 8 tests were respectively conducted in March and in June of 2014. The monitoring showed large differences in VOCs concentrations between background and downwind receptors, reaching 59.7 ppbv in March and 248.6 ppbv in June, on average. The VOCs increases at receptors mainly consisted of ethane (3.1%-22.6%), propane (3.8%-11.3%), isobutane (8.5%-10.2%), n-butane (9.9%-13.2%), isopentane (6.1%-12.9%), n-pentane (5.1%-9.7%), propylene (6.1-11.1%) and 1-butylene (1.6%-5.4%). The chemical composition of the VOCs increases in this field monitoring was similar to that of VOCs emissions from China's refineries reported, which revealed that the ambient VOCs increases were predominantly contributed by this refinery. So, we used the ISC3 model to create the relationship coefficient γ for each receptor of each test. In result, the monthly VOCs emissions from this refinery were calculated to be 183.5 ± 89.0 ton in March and 538.3 ± 281.0 ton in June. The estimate in June was greatly higher than in March, chiefly because the higher environmental temperature in summer produced more VOCs emissions from evaporation and fugitive process of the refinery. Finally, the VOCs emission factors (g VOCs/kg crude oil refined) of 0.73 ± 0.34 (in March) and 2.15 ± 1.12 (in June) were deduced for this refinery, being in the same order with previous direct-measurement results (1.08-2.65 g VOCs/kg crude oil refined). An inverse-dispersion calculation method was applied to estimate VOCs emission rate for a petroleum refinery, being 183.5 ton/month (March) and 538.3 ton/month (June). Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Refinery Capacity Report

    EIA Publications

    2017-01-01

    Data series include fuel, electricity, and steam purchased for consumption at the refinery; refinery receipts of crude oil by method of transportation; and current and projected atmospheric crude oil distillation, downstream charge, and production capacities. Respondents are operators of all operating and idle petroleum refineries (including new refineries under construction) and refineries shut down during the previous year, located in the 50 states, the District of Columbia, Puerto Rico, the Virgin Islands, Guam, and other U.S. possessions. The Refinery Capacity Report does not contain working and shell storage capacity data. This data is now being collected twice a year as of March 31 and September 30 on the Form EIA-810, "Monthly Refinery Report", and is now released as a separate report Working and Net Available Shell Storage Capacity.

  3. Health Risk Assessment for Exposure to Benzene in Petroleum Refinery Environments

    PubMed Central

    Edokpolo, Benjamin; Yu, Qiming Jimmy; Connell, Des

    2015-01-01

    The health risk resulting from benzene exposure in petroleum refineries was calculated using data from the scientific literature from various countries throughout the world. The exposure data was collated into four scenarios from petroleum refinery environments and plotted as cumulative probability distributions (CPD) plots. Health risk was evaluated for each scenario using the Hazard Quotient (HQ) at 50% (CEXP50) and 95% (CEXP95) exposure levels. Benzene levels were estimated to pose a significant risk with HQ50 > 1 and HQ95 > 1 for workers exposed to benzene as base estimates for petroleum refinery workers (Scenario 1), petroleum refinery workers evaluated with personal samplers in Bulgarian refineries (Scenario 2B) and evaluated using air inside petroleum refineries in Bulgarian refineries (Scenario 3B). HQ50 < 1 were calculated for petroleum refinery workers with personal samplers in Italian refineries (Scenario 2A), air inside petroleum refineries (Scenario 3A) and air outside petroleum refineries (Scenario 4) in India and Taiwan indicating little possible adverse health effects. Also, HQ95 was < 1 for Scenario 4 however potential risk was evaluated for Scenarios 2A and 3A with HQ95 > 1. The excess Cancer risk (CR) for lifetime exposure to benzene for all the scenarios was evaluated using the Slope Factor and Overall Risk Probability (ORP) methods. The result suggests a potential cancer risk for exposure to benzene in all the scenarios. However, there is a higher cancer risk at 95% (CEXP95) for petroleum refinery workers (2B) with a CR of 48,000 per 106 and exposure to benzene in air inside petroleum refineries (3B) with a CR of 28,000 per 106. PMID:25588154

  4. 40 CFR 80.94 - Requirements for gasoline produced at foreign refineries.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Requirements for gasoline produced at... for gasoline produced at foreign refineries. (a) Definitions. (1) A foreign refinery is a refinery... definition of refiner under § 80.2(i) for foreign refinery. (3) FRGAS means gasoline produced at a foreign...

  5. 40 CFR 80.94 - Requirements for gasoline produced at foreign refineries.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Requirements for gasoline produced at... for gasoline produced at foreign refineries. (a) Definitions. (1) A foreign refinery is a refinery... definition of refiner under § 80.2(i) for foreign refinery. (3) FRGAS means gasoline produced at a foreign...

  6. 40 CFR 80.94 - Requirements for gasoline produced at foreign refineries.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Requirements for gasoline produced at... for gasoline produced at foreign refineries. (a) Definitions. (1) A foreign refinery is a refinery... definition of refiner under § 80.2(i) for foreign refinery. (3) FRGAS means gasoline produced at a foreign...

  7. Atmospheric deposition of mercury in Atlantic Forest and ecological risk to soil fauna

    NASA Astrophysics Data System (ADS)

    Cristhy Buch, Andressa; Cabral Teixeira, Daniel; Fernandes Correia, Maria Elizabeth; Vieira Silva-Filho, Emmanoel

    2014-05-01

    The increasing levels of mercury (Hg) found in the atmosphere nowadays has a great contribution from anthropogenic sources and has been a great concern in the past two decades in industrialized countries. Brazil is the seventh country with the highest rate of mercury in the atmosphere. Certainly, the petroleum refineries have significant contribution, seen that 100 million m3 of crude oil are annually processed. These refineries contribute with low generation of solid waste; however, a large fraction of Hg can be emitted to the atmosphere. There are sixteen refineries in Brazil, three of them located in the state of Rio de Janeiro. The Hg is a toxic and hazardous trace element, naturally found in the earth crust. The major input of Hg to ecosystems is through atmospheric deposition (wet and dry), being transported in the atmosphere over large distances. The forest biomes are of great importance in the atmosphere/soil cycling of elemental Hg through foliar uptake and subsequent transfer to the soil through litterfall, which play an important role as Hg sink. The Atlantic Forest of Brazil is the greater contributor of fauna and flora biodiversity in the world and, according to recent studies, this biome has the highest concentrations of mercury in litter in the world, as well as in China, at Subtropical Forest. Ecotoxicological assessments can predict the potential ecological risk of Hg toxicity in the soil can lead to impact the soil fauna and indirectly other trophic levels of the food chain within one or more ecosystems. This study aims to determine mercury levels that represent risks to diversity and functioning of soil fauna in tropical forest soils. The study is conducted in two forest areas inserted into conservation units of Rio de Janeiro state. One area is located next to an important petroleum refinery in activity since fifty-two years ago, whereas the other one is located next to other refinery under construction (beginning activities in 2015), which will be the largest refinery of Brazil and, consequently, with less anthropogenic influences for the moment. Ecological risk assessments are conducted together with ecotoxicological tests in natural and artificial tropical soils, using exotic and native species of the soil fauna, naturally present in the area of study, in order to determine the risk of mercury in soil and litter in tropical forest. Previous results confirm higher concentrations of mercury in litter and soil of the forest area closest to the operating refinery. The presence of Hg seems to select the size of the organisms as well as the abundance and diversity of the soil fauna that remain in tropical forest.

  8. Use of refinery computer model to predict fuel production

    NASA Technical Reports Server (NTRS)

    Flores, F. J.

    1979-01-01

    Several factors (crudes, refinery operation and specifications) that affect yields and properties of broad specification jet fuel were parameterized using the refinery simulation model which can simulate different types of refineries were used to make the calculations. Results obtained from the program are used to correlate yield as a function of final boiling point, hydrogen content and freezing point for jet fuels produced in two refinery configurations, each one processing a different crude mix. Refinery performances are also compared in terms of energy consumption.

  9. 2. NORTHEAST CORNER OF LARD REFINERY (CONNECTING BUILDING ON THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. NORTHEAST CORNER OF LARD REFINERY (CONNECTING BUILDING ON THE RIGHT) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Lard Refinery, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

  10. Environmental nickel exposure from oil refinery emissions: a case study in Ecuador.

    PubMed

    Harari, Raúl; Harari, Florencia; Forastiere, Francesco

    2016-01-01

    Nickel is a strong skin and respiratory sensitizer and a recognized carcinogen. Oil refineries are important sources of atmospheric emissions of toxic pollutants, including nickel. Populations residing close to oil refineries are at potential risk. The aim of this study was to evaluate the exposure to nickel in a population living close to the largest oil refinery in Ecuador, located in the city of Esmeraldas. We recruited 47 workers from the oil refinery as well as 195 students from 4 different schools close to the plant and 94 students from another school 25 km far from the industry. Urinary nickel concentrations were used to assess the exposure to nickel. Students from the school next to the oil refinery showed the highest urinary nickel concentrations while workers from the refinery showed the lowest concentrations. Median nickel concentrations were > 2µg/L in all study groups. The populations living close to the oil refineries are potentially exposed to nickel from atmospheric emissions. Further studies investigating nickel-related health effects in the population residing close to the refinery of Esmeralda are needed.

  11. 3. FOURTH FLOOR OF LARD REFINERY (NOTICE ORIGINAL WOODEN BEAMS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. FOURTH FLOOR OF LARD REFINERY (NOTICE ORIGINAL WOODEN BEAMS AND UNDATED LARD PRESS AND VATS ON RIGHT SIDE) - Wilson's Oil House, Lard Refinery, & Edible Fats Factory, Lard Refinery, 2801 Southwest Fifteenth Street, Oklahoma City, Oklahoma County, OK

  12. Updated estimation of energy efficiencies of U.S. petroleum refineries.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Palou-Rivera, I.; Wang, M. Q.

    2010-12-08

    Evaluation of life-cycle (or well-to-wheels, WTW) energy and emission impacts of vehicle/fuel systems requires energy use (or energy efficiencies) of energy processing or conversion activities. In most such studies, petroleum fuels are included. Thus, determination of energy efficiencies of petroleum refineries becomes a necessary step for life-cycle analyses of vehicle/fuel systems. Petroleum refinery energy efficiencies can then be used to determine the total amount of process energy use for refinery operation. Furthermore, since refineries produce multiple products, allocation of energy use and emissions associated with petroleum refineries to various petroleum products is needed for WTW analysis of individual fuels suchmore » as gasoline and diesel. In particular, GREET, the life-cycle model developed at Argonne National Laboratory with DOE sponsorship, compares energy use and emissions of various transportation fuels including gasoline and diesel. Energy use in petroleum refineries is key components of well-to-pump (WTP) energy use and emissions of gasoline and diesel. In GREET, petroleum refinery overall energy efficiencies are used to determine petroleum product specific energy efficiencies. Argonne has developed petroleum refining efficiencies from LP simulations of petroleum refineries and EIA survey data of petroleum refineries up to 2006 (see Wang, 2008). This memo documents Argonne's most recent update of petroleum refining efficiencies.« less

  13. Market survey on products from the Tema Oil Refinery carried out as part of the feasibility study on the Tema Oil Refinery expansion project. Export trade information

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-10-01

    The Tema Oil Refinery (TOR), which was commissioned in 1963, is a simple hydroskimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years some of the equipment in the refinery has deteriorated or become obsolete necessitating major rehabilitation. A feasibility study is investigating the modernization and expansion of the refinery to meet projected market demands until the year 2005. The report presents the results of a market survey done on products from TOR.

  14. 40 CFR 80.1141 - Small refinery exemption.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Renewable Fuel Standard § 80.1141 Small refinery exemption...)), is exempt from the renewable fuel standards of § 80.1105 and the requirements that apply to obligated... refinery application. The application must contain all of the elements required for small refinery...

  15. Numerical Simulation of an Industrial Cumulus Affected by Heat, Moisture, and CCN Released from an Oil Refinery.

    NASA Astrophysics Data System (ADS)

    Guan, S.; Reuter, G. W.

    1996-08-01

    Large oil refineries emit heat, vapor, and cloud condensation nuclei (CCN), all of which can affect the formation of cloud and precipitation. This study quantities the relative contributions of the three factors on cloud development in calm wind conditions using an axisymmetric cloud model. The factor separation technique is applied to isolate the net contributions of waste heat, vapor, and CCN on the rainfall of a cumulus developing in the industrial plume. The mutual-interactive contributions of two or three of the factors are also computed.The simulations for midlatitude and tropical conditions indicate that the sensible heat provides the major stimulus for cloud development and rain formation. The pure contribution of the industrial CCN is to enhance the condensation, causing an increase in the mass of total cloud water. The simulation results indicate that mutual interactions between waste heat and industrial CCN are large for both cases considered.

  16. 40 CFR 80.1280 - How are refinery benzene baselines calculated?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false How are refinery benzene baselines... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1280 How are refinery benzene baselines calculated? (a) A refinery's benzene...

  17. 40 CFR 80.1280 - How are refinery benzene baselines calculated?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false How are refinery benzene baselines... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1280 How are refinery benzene baselines calculated? (a) A refinery's benzene...

  18. 40 CFR 80.1280 - How are refinery benzene baselines calculated?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How are refinery benzene baselines... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1280 How are refinery benzene baselines calculated? (a) A refinery's benzene...

  19. 40 CFR 80.1280 - How are refinery benzene baselines calculated?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false How are refinery benzene baselines... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1280 How are refinery benzene baselines calculated? (a) A refinery's benzene...

  20. 40 CFR 80.1280 - How are refinery benzene baselines calculated?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false How are refinery benzene baselines... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Averaging, Banking and Trading (abt) Program § 80.1280 How are refinery benzene baselines calculated? (a) A refinery's benzene...

  1. 78 FR 76788 - Standards of Performance for Petroleum Refineries for Which Construction, Reconstruction, or...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-19

    ...-AS03 Standards of Performance for Petroleum Refineries for Which Construction, Reconstruction, or... Petroleum Refineries for Which Construction, Reconstruction, or Modification Commenced After May 14, 2007... the standards of performance for petroleum refineries at 40 CFR part 60, subpart Ja. We are proposing...

  2. 75 FR 27641 - Safety Zone; Marathon Oil Refinery Construction, Rouge River, Detroit, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-18

    ...-AA00 Safety Zone; Marathon Oil Refinery Construction, Rouge River, Detroit, MI AGENCY: Coast Guard, DHS... River during the Marathon Oil Refinery Construction project. This temporary safety zone is necessary to... personnel during the setup and offloading of equipment in conjunction with the Marathon Oil Refinery...

  3. 40 CFR 80.295 - How is a refinery sulfur baseline determined?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How is a refinery sulfur baseline... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Abt Program-Baseline Determination § 80.295 How is a refinery sulfur baseline determined? (a) A refinery's gasoline sulfur baseline...

  4. 40 CFR 80.295 - How is a refinery sulfur baseline determined?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false How is a refinery sulfur baseline... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Abt Program-Baseline Determination § 80.295 How is a refinery sulfur baseline determined? (a) A refinery's gasoline sulfur baseline...

  5. 40 CFR 80.295 - How is a refinery sulfur baseline determined?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false How is a refinery sulfur baseline... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Abt Program-Baseline Determination § 80.295 How is a refinery sulfur baseline determined? (a) A refinery's gasoline sulfur baseline...

  6. 40 CFR 80.295 - How is a refinery sulfur baseline determined?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false How is a refinery sulfur baseline... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Abt Program-Baseline Determination § 80.295 How is a refinery sulfur baseline determined? (a) A refinery's gasoline sulfur baseline...

  7. 40 CFR 80.295 - How is a refinery sulfur baseline determined?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false How is a refinery sulfur baseline... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Abt Program-Baseline Determination § 80.295 How is a refinery sulfur baseline determined? (a) A refinery's gasoline sulfur baseline...

  8. The Effects of Soil Type and Chemical Treatment on Nickel Speciation in Refinery Enriched Soils: A Multi-Technique Investigation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McNear, Jr.,D.; Chaney, R.; Sparks, D.

    2007-01-01

    Aerial deposition of Ni from a refinery in Port Colborne, Ontario, Canada has resulted in the enrichment of 29 km{sup 2} of land with Ni concentrations exceeding the Canadian Ministry of the Environment's remedial action level of 200 mg kg{sup -1}. Several studies on these soils have shown that making the soils calcareous was effective at reducing chemically extractable Ni, as well as alleviating Ni phytotoxicity symptoms in vegetable crops grown in the vicinity of the refinery. Conversely, dolomitic limestone additions resulted in increased uptake of Ni in the Ni hyperaccumulator Alyssum murale 'Kotodesh', a plant whose use was proposedmore » as a remediation strategy for this area. In this paper we use multiple techniques to directly assess the role soil type and lime treatments play in altering the speciation of Ni in the Welland loam and Quarry muck soils around the refinery and relate these findings to Ni mobility and bioavailability. Stirred-flow dissolution experiments using pH 4 HNO{sub 3} showed that Ni release from the limed Quarry muck and Welland loam soils was reduced ({approx}0.10%) relative to the unlimed soils ({approx}2.0%). Electron microprobe analysis (EMPA) identified approximately spherical NiO and Ni metal particles, which are associated with no other metals, and range from 5 to 50 {mu}m in diameter. Synchrotron micro-X-ray absorption fine structure and X-ray fluorescence spectroscopies showed that Ni and Al layered double hydroxide (Ni-Al LDH) phases were present in both the limed and unlimed mineral soils, with a tendency towards more stable (e.g., aged-LDH and phyllosilicate) Ni species in the limed soil, possibly aided by the solubilization of Si with increasing pH. In the muck soils, Ni-organic complexes (namely fulvic acid) dominated the speciation in both limed and unlimed soils. The results reported herein show that both soil type and treatment have a pronounced effect on the speciation of Ni in the soils surrounding the Port Colborne refinery. We provide the first evidence that Ni-Al LDH phases can form in anthropogenically enriched mineral field soils at circumneutral pH, and can lead to a reduction in Ni mobility. In the organic soils Ni is strongly complexed by soil organic matter; a property enhanced with liming. Interestingly, increased accumulation of Ni by A. murale grown in the limed muck and loam soils indicates that the plant may be capable of removing Ni from those fractions typically considered unavailable to most plants.« less

  9. The effects of soil type and chemical treatment on nickel speciation in refinery enriched soils: A multi-technique investigation

    NASA Astrophysics Data System (ADS)

    McNear, David H.; Chaney, Rufus L.; Sparks, Donald L.

    2007-05-01

    Aerial deposition of Ni from a refinery in Port Colborne, Ontario, Canada has resulted in the enrichment of 29 km 2 of land with Ni concentrations exceeding the Canadian Ministry of the Environment's remedial action level of 200 mg kg -1. Several studies on these soils have shown that making the soils calcareous was effective at reducing chemically extractable Ni, as well as alleviating Ni phytotoxicity symptoms in vegetable crops grown in the vicinity of the refinery. Conversely, dolomitic limestone additions resulted in increased uptake of Ni in the Ni hyperaccumulator Alyssum murale 'Kotodesh', a plant whose use was proposed as a remediation strategy for this area. In this paper we use multiple techniques to directly assess the role soil type and lime treatments play in altering the speciation of Ni in the Welland loam and Quarry muck soils around the refinery and relate these findings to Ni mobility and bioavailability. Stirred-flow dissolution experiments using pH 4 HNO 3 showed that Ni release from the limed Quarry muck and Welland loam soils was reduced (˜0.10%) relative to the unlimed soils (˜2.0%). Electron microprobe analysis (EMPA) identified approximately spherical NiO and Ni metal particles, which are associated with no other metals, and range from 5 to 50 μm in diameter. Synchrotron micro-X-ray absorption fine structure and X-ray fluorescence spectroscopies showed that Ni and Al layered double hydroxide (Ni-Al LDH) phases were present in both the limed and unlimed mineral soils, with a tendency towards more stable (e.g., aged-LDH and phyllosilicate) Ni species in the limed soil, possibly aided by the solubilization of Si with increasing pH. In the muck soils, Ni-organic complexes (namely fulvic acid) dominated the speciation in both limed and unlimed soils. The results reported herein show that both soil type and treatment have a pronounced effect on the speciation of Ni in the soils surrounding the Port Colborne refinery. We provide the first evidence that Ni-Al LDH phases can form in anthropogenically enriched mineral field soils at circumneutral pH, and can lead to a reduction in Ni mobility. In the organic soils Ni is strongly complexed by soil organic matter; a property enhanced with liming. Interestingly, increased accumulation of Ni by A. murale grown in the limed muck and loam soils indicates that the plant may be capable of removing Ni from those fractions typically considered unavailable to most plants.

  10. 77 FR 47429 - Agency Information Collection Activities; Petroleum Refineries in Foreign Trade Sub-zones

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-08

    ... Activities; Petroleum Refineries in Foreign Trade Sub-zones AGENCY: U.S. Customs and Border Protection (CBP... requirement concerning the Petroleum Refineries in Foreign Trade Sub-zones. This request for comment is being...: Title: Petroleum Refineries in Foreign Trade Sub-zones. OMB Number: 1651-0063. Form Number: None...

  11. Feasibility study on the modernization and expansion of the Tema Oil Refinery. Executive Summary. Export trade information

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-04-01

    The Tema Oil Refinery (TOR), which was commissioned in 1963, is a simple hydro-skimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years some of the equipment in the refinery has deteriorated or become obsolete necessitating major rehabilitation. A study of the refinery expansion project takes into consideration earlier studies and, equally important, recognizes the extensive work done by TOR in rehabilitating the refinery. The program, carried out in phases because of funding limitations, has addressed the critical repairs and replacements in the process unitsmore » and utilities necessary to prolong the life of the refinery and assure reliability and safe operation. It undertook the task of investigating the feasibility of modernizing and expanding the refinery at Tema, Ghana to meet projected market demands until the year 2005. A process planning study was conducted to select the optimal process and utility configuration which would result in economic benefits to Ghana.« less

  12. Community reappraisal of the perceived health effects of a petroleum refinery.

    PubMed

    Luginaah, Isaac N; Taylor, S Martin; Elliott, Susan J; Eyles, John D

    2002-07-01

    This paper presents results from a study of the community health impacts of a petroleum refinery in Oakville, Ontario in Canada. The research is informed by the environmental stress and coping literatures and the focus is on community reappraisal of the refinery's impacts before and after the implementation of a substantive odour reduction initiative on the part of the refinery operators. Community health surveys were conducted in 1992 (n = 391) and 1997 (n = 427) to examine changes in odour perception and annoyance and self-reported health status attributable to the odour reduction plan. The findings reported here suggest an on-going process of cognitive reappraisal, whereby negative perceptions and concerns decreased between 1992 and 1997. Irrespective of this positive reappraisal of the refinery efforts, those living close to the refinery continue to report negative health impacts. A strong mediating effect of odours on the refinery exposure-symptom reporting relationship was confirmed by our results. While the relationship between odour perception and symptom reporting indicates the importance of odour perception and annoyance as the principal mechanism mediating ill-health reporting, the plausibility of other causal pathways is recognized. Residents' sensitivity to the negative effects of the refinery on their health and the health of their children suggests a psychosocial reaction to the environmental stress associated with perceived and actual refinery emissions.

  13. Potential air emission impacts of cellulosic ethanol production at seven demonstration refineries in the United States.

    PubMed

    Jones, Donna Lee

    2010-09-01

    This paper reports on the estimated potential air emissions, as found in air permits and supporting documentation, for seven of the first group of precommercial or "demonstration" cellulosic ethanol refineries (7CEDF) currently operating or planning to operate in the United States in the near future. These seven refineries are designed to produce from 330,000 to 100 million gal of ethanol per year. The overall average estimated air emission rates for criteria, hazardous, and greenhouse gas pollutants at the 7CEDF are shown here in terms of tons per year and pounds per gallon of ethanol produced. Water use rates estimated for the cellulosic ethanol refineries are also noted. The air emissions are then compared with similar estimates from a U.S. cellulosic ethanol pilot plant, a commercial Canadian cellulosic ethanol refinery, four commercial U.S. corn ethanol refineries, and U.S. petroleum refineries producing gasoline. The U.S. Environmental Protection Agency (EPA) air pollution rules that may apply to cellulosic ethanol refineries are also discussed. Using the lowest estimated emission rates from these cellulosic ethanol demonstration facilities to project air emissions, EPA's major source thresholds for criteria and hazardous air pollutants might not be exceeded by cellulosic ethanol refineries that produce as high as 25 million gal per year of ethanol (95 ML). Emissions are expected to decrease at cellulosic ethanol refineries as the process matures and becomes more commercially viable.

  14. Multi objective multi refinery optimization with environmental and catastrophic failure effects objectives

    NASA Astrophysics Data System (ADS)

    Khogeer, Ahmed Sirag

    2005-11-01

    Petroleum refining is a capital-intensive business. With stringent environmental regulations on the processing industry and declining refining margins, political instability, increased risk of war and terrorist attacks in which refineries and fuel transportation grids may be targeted, higher pressures are exerted on refiners to optimize performance and find the best combination of feed and processes to produce salable products that meet stricter product specifications, while at the same time meeting refinery supply commitments and of course making profit. This is done through multi objective optimization. For corporate refining companies and at the national level, Intea-Refinery and Inter-Refinery optimization is the second step in optimizing the operation of the whole refining chain as a single system. Most refinery-wide optimization methods do not cover multiple objectives such as minimizing environmental impact, avoiding catastrophic failures, or enhancing product spec upgrade effects. This work starts by carrying out a refinery-wide, single objective optimization, and then moves to multi objective-single refinery optimization. The last step is multi objective-multi refinery optimization, the objectives of which are analysis of the effects of economic, environmental, product spec, strategic, and catastrophic failure. Simulation runs were carried out using both MATLAB and ASPEN PIMS utilizing nonlinear techniques to solve the optimization problem. The results addressed the need to debottleneck some refineries or transportation media in order to meet the demand for essential products under partial or total failure scenarios. They also addressed how importing some high spec products can help recover some of the losses and what is needed in order to accomplish this. In addition, the results showed nonlinear relations among local and global objectives for some refineries. The results demonstrate that refineries can have a local multi objective optimum that does not follow the same trends as either global or local single objective optimums. Catastrophic failure effects on refinery operations and on local objectives are more significant than environmental objective effects, and changes in the capacity or the local objectives follow a discrete behavioral pattern, in contrast to environmental objective cases in which the effects are smoother. (Abstract shortened by UMI.)

  15. DoD Mobility Fuels Guidelines Short-Term Issues,

    DTIC Science & Technology

    1979-06-01

    built domestic plants . However, if no sub- stantial increase in domestic refinery capacity is forthcoming, this will encourage construction of new...from refinery investment. Under the Clean Air Act, refiners feel considerable uncertainty regarding fuel additives and refinery emissions . This has...II- 7 Market Structure ......... .................... II- 7 Refinery Capacity ........ .................... I- 9 Proposed Conversion to JP-8

  16. 40 CFR 80.596 - How is a refinery motor vehicle diesel fuel volume baseline calculated?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... vehicle diesel fuel produced during the most recent calendar year the refinery was in operation after... the U.S. during the most recent calendar year the refinery was in operation after being reactivated... most recent calendar year the refinery was in operation after being reactivated pursuant to § 80.595(c...

  17. 40 CFR 80.596 - How is a refinery motor vehicle diesel fuel volume baseline calculated?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... vehicle diesel fuel produced during the most recent calendar year the refinery was in operation after... the U.S. during the most recent calendar year the refinery was in operation after being reactivated... most recent calendar year the refinery was in operation after being reactivated pursuant to § 80.595(c...

  18. 40 CFR 80.596 - How is a refinery motor vehicle diesel fuel volume baseline calculated?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... vehicle diesel fuel produced during the most recent calendar year the refinery was in operation after... the U.S. during the most recent calendar year the refinery was in operation after being reactivated... most recent calendar year the refinery was in operation after being reactivated pursuant to § 80.595(c...

  19. Integrated systems optimization model for biofuel development: The influence of environmental constraints

    NASA Astrophysics Data System (ADS)

    Housh, M.; Ng, T.; Cai, X.

    2012-12-01

    The environmental impact is one of the major concerns of biofuel development. While many other studies have examined the impact of biofuel expansion on stream flow and water quality, this study examines the problem from the other side - will and how a biofuel production target be affected by given environmental constraints. For this purpose, an integrated model comprises of different sub-systems of biofuel refineries, transportation, agriculture, water resources and crops/ethanol market has been developed. The sub-systems are integrated into one large-scale model to guide the optimal development plan considering the interdependency between the subsystems. The optimal development plan includes biofuel refineries location and capacity, refinery operation, land allocation between biofuel and food crops, and the corresponding stream flow and nitrate load in the watershed. The watershed is modeled as a network flow, in which the nodes represent sub-watersheds and the arcs are defined as the linkage between the sub-watersheds. The runoff contribution of each sub-watershed is determined based on the land cover and the water uses in that sub-watershed. Thus, decisions of other sub-systems such as the land allocation in the land use sub-system and the water use in the refinery sub-system define the sources and the sinks of the network. Environmental policies will be addressed in the integrated model by imposing stream flow and nitrate load constraints. These constraints can be specified by location and time in the watershed to reflect the spatial and temporal variation of the regulations. Preliminary results show that imposing monthly water flow constraints and yearly nitrate load constraints will change the biofuel development plan dramatically. Sensitivity analysis is performed to examine how the environmental constraints and their spatial and the temporal distribution influence the overall biofuel development plan and the performance of each of the sub-systems. Additional scenarios are analyzed to show the synergies of crop pattern choice (first versus second generation of biofuel crops), refinery technology adaptation (particularly on water use), refinery plant distribution, and economic incentives in terms of balanced environmental protection and bioenergy development objectives.

  20. Water requirements of the petroleum refining industry

    USGS Publications Warehouse

    Otts, Louis Ethelbert

    1964-01-01

    About 3,500 million gallons of water was withdrawn daily in 1955 for use by petroleum refineries in the United States. This was about 3 percent of the estimated daily withdrawal of industrial water in the United States in 1955. An average of 468 gallons of water was required to refine a barrel of crude oil, and the median was 95 gallons of water per barrel of crude charge; withdrawals ranged from 6.5 to 3,240 gallons per barrel. Ninety-one percent of the water requirements of the petroleum refineries surveyed was for cooling. One-third of the refineries reused their cooling water from 10 to more than 50 times. Only 17 refineries used once-through cooling systems. Refineries with recirculating cooling systems circulated about twice as much cooling water but needed about 25 times less makeup; however, they consumed about 24 times more water per barrel of charge than refineries using once-through cooling systems. The average noncracking refinery used about 375 gallons of water per barrel of crude, which is less than the 471-gallon average of refineries with cracking facilities. Refineries are composed of various processing units, and the water requirements of such units varied ; median makeup needs ranged from about 125 gallons per barrel for polymerization and alkylation units to 15.5 gallons per barrel for distillation units. Refinery-owned sources of water supplied 95 percent of the makeup-water requirements. Surface-water sources provided 86 percent of the makeup-water demand. Less than 1 percent of the makeup water was obtained from reprocessed municipal sewage.

  1. Mining machinery/equipment/parts/services. Oil and gas field equipment/machinery/parts/supplies (Ecuador). Refinery equipment, parts, and accessories, March 1991. Export trade information

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-03-01

    The petroleum sector in Ecuador brings in about 65 percent of the country's revenue. Three of the refineries are located in the coastal region. The other two, plus the Liquified Petroleum Gas Plant (LPG), are located in the Oriente region (Amazon jungle). The refineries operate at about 85% of their installation capacity. The Petroindustrial and Petropeninsula investment plan for 1991 comtemplates the expansion of the Esmeraldas refinery to 110,000 barrels a day, and the up-grading of the Shushufindi and Libertad refineries located near the city of Guayaquil. The United States is by far the largest supplier of refinery equipment, partsmore » and accessories, controlling about 90% of the total market.« less

  2. Feasibility study on the modernization and expansion of the Tema Oil Refinery: Appendix 1, Part A. REFOP reports. Export trade information (Draft)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-04-01

    The Tema Oil Refinery, which was commissioned in 1963, is a simple hydroskimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years, some of the equipment in the refinery has deteriorated or become obsolete, necessitating major rehabilitation. A feasibility study is investigating the modernization and expansion of the refinery to meet projected market demands until the year 2005. This report is appendix I, part A to the feasibility study.

  3. Feasibility study on the modernization and expansion of the Tema Oil Refinery: Appendix 1, Part B. REFOP reports (Final report). Export trade information

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-04-01

    The Tema Oil Refinery, which was commissioned in 1963, is a simple hydroskimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years, some of the equipment in the refinery has deteriorated or become obsolete, necessitating major rehabilitation. A feasibility study is investigating the modernization and expansion of the refinery to meet projected market demands until the year 2005. This report is appendix I, part B to the feasibility study.

  4. Refinery evaluation of optical imaging to locate fugitive emissions.

    PubMed

    Robinson, Donald R; Luke-Boone, Ronke; Aggarwal, Vineet; Harris, Buzz; Anderson, Eric; Ranum, David; Kulp, Thomas J; Armstrong, Karla; Sommers, Ricky; McRae, Thomas G; Ritter, Karin; Siegell, Jeffrey H; Van Pelt, Doug; Smylie, Mike

    2007-07-01

    Fugitive emissions account for approximately 50% of total hydrocarbon emissions from process plants. Federal and state regulations aiming at controlling these emissions require refineries and petrochemical plants in the United States to implement a Leak Detection and Repair Program (LDAR). The current regulatory work practice, U.S. Environment Protection Agency Method 21, requires designated components to be monitored individually at regular intervals. The annual costs of these LDAR programs in a typical refinery can exceed US$1,000,000. Previous studies have shown that a majority of controllable fugitive emissions come from a very small fraction of components. The Smart LDAR program aims to find cost-effective methods to monitor and reduce emissions from these large leakers. Optical gas imaging has been identified as one such technology that can help achieve this objective. This paper discusses a refinery evaluation of an instrument based on backscatter absorption gas imaging technology. This portable camera allows an operator to scan components more quickly and image gas leaks in real time. During the evaluation, the instrument was able to identify leaking components that were the source of 97% of the total mass emissions from leaks detected. More than 27,000 components were monitored. This was achieved in far less time than it would have taken using Method 21. In addition, the instrument was able to find leaks from components that are not required to be monitored by the current LDAR regulations. The technology principles and the parameters that affect instrument performance are also discussed in the paper.

  5. Tracing source pollution in soils using cadmium and lead isotopes.

    PubMed

    Cloquet, C; Carignan, J; Libourel, G; Sterckeman, T; Perdrix, E

    2006-04-15

    Tracing the source of heavy metals in the environment is of key importance for our understanding of their pollution and natural cycles in the surface Earth reservoirs. Up to now, most exclusively Pb isotopes were used to effectively trace metal pollution sources in the environment. Here we report systematic variations of Cd isotope ratios measured in polluted topsoils surrounding a Pb-Zn refinery plant in northern France. Fractionated Cd was measured in soil samples surrounding the refinery, and this fractionation can be attributed to the refining processes. Despite the Cd isotopic ratios being precisely measured, the obtained uncertainties are still large compared to the total isotopic variation. Nevertheless, for the first time, Cd isotopically fractionated by industrial processes may be traced in the environment. On the same samples, Pb isotope systematics suggested that materials actually used by the refinery were not the major source of Pb in soils, probably because refined ore origins changed over the 100 years of operation. On the other hand, Cd isotopes and concentrations measured in topsoils allowed identification of three main origins (industrial dust and slag and agriculture), assuming that all Cd ores are not fractionated, as suggested by terrestrial rocks so far analyzed, and calculation of their relative contributions for each sampling point. Understanding that this refinery context was an ideal situation for such a study, our results lead to the possibility of tracing sources of anthropogenic Cd and better constrain mixing processes, fluxes, transport, and phasing out of industrial input in nature.

  6. Slides for Petroleum Refinery Fenceline Monitoring Data

    EPA Pesticide Factsheets

    These webinars provided an overview of EPA’s 2015 rule to reduce air emissions from petroleum refineries and solicit input on how to display the information collected from fenceline monitors at refineries.

  7. Combined analysis of job and task benzene air exposures among workers at four US refinery operations

    PubMed Central

    Shin, Jennifer (Mi); Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

    2016-01-01

    Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers’ exposures to benzene over the past 30 years. PMID:26862134

  8. Combined analysis of job and task benzene air exposures among workers at four US refinery operations.

    PubMed

    Burns, Amanda; Shin, Jennifer Mi; Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

    2017-03-01

    Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers' exposures to benzene over the past 30 years.

  9. 75 FR 14545 - Revisions to the California State Implementation Plan

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-26

    ... producing devices by covering hot wells and collecting vapors for recycle to refinery gas or incineration... refinery process unit turnaround by collecting vapors for recycle to refinery gas, incineration, or flaring...

  10. Feasibility study report for the Imperial Valley Ethanol Refinery: a 14. 9-million-gallon-per-year ethanol synfuel refinery utilizing geothermal energy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1981-03-01

    The construction and operation of a 14,980,000 gallon per year fuel ethanol from grain refinery in the Imperial Valley of California is proposed. The Imperial Valley Ethanol Refinery (refinery) will use hot geothermal fluid from geothermal resources at the East Mesa area as the source of process energy. In order to evaluate the economic viability of the proposed Project, exhaustive engineering, cost analysis, and financial studies have been undertaken. This report presents the results of feasibility studies undertaken in geothermal resource, engineering, marketing financing, management, environment, and permits and approvals. The conclusion of these studies is that the Project ismore » economically viable. US Alcohol Fuels is proceeding with its plans to construct and operate the Refinery.« less

  11. Alumina Refinery Wastewater Management: When Zero Discharge Just Isn't Feasible….

    NASA Astrophysics Data System (ADS)

    Martin, Lucy; Howard, Steven

    Management and treatment of liquid effluents are determinant considerations in the design of alumina refineries. Rainfall, evaporation rate, proximity to the coast, process design and layout, ore mineralogy, the local environment, and potential impact on contiguous communities are all integral to the development of an appropriate refinery water management strategy. The goal is to achieve zero discharge of liquid effluent to the environment. However this is not always the most feasible solution under the extreme rainfall conditions in tropical and subtropical locations. This paper will explore the following issues for both inland and coastal refineries: • Methods to reduce and control refinery discharges

  12. Potential Impacts of Reductions in Refinery Activity on Northeast Petroleum Product Markets

    EIA Publications

    2012-01-01

    Potential Impacts of Reductions in Refinery Activity on Northeast Petroleum Product Markets is an update to a previous Energy Information Administration (EIA) report, Reductions in Northeast Refining Activity: Potential Implications for Petroleum Product Markets, released in December 2011. This update analyzes possible market responses and impacts in the event Sunoco's Philadelphia refinery closes this summer, in addition to the recently idled refineries on the East Coast and in the U.S. Virgin Islands.

  13. Can lung cancer risk among nickel refinery workers be explained by occupational exposures other than nickel?

    PubMed

    Grimsrud, Tom K; Berge, Steinar R; Haldorsen, Tor; Andersen, Aage

    2005-03-01

    Exposures in nickel refineries represent complex chemical mixtures, but only the effect of nickel has been evaluated quantitatively in epidemiologic studies of nickel workers. For a Norwegian refinery, time- and department-specific exposure estimates were developed for arsenic, sulfuric acid mists, and cobalt in air on the basis of personal measurements and chemical data on raw materials and process intermediates. Exposure to asbestos, as well as employment in high-risk occupations outside the refinery, were assessed. We conducted a case-control study nested in a cohort of refinery workers, with 213 cases (diagnosed 1952-1995) and 525 age-matched controls. We analyzed lung cancer risk, adjusted for smoking, by cumulative exposure and duration of work. There was a substantial association between cumulative exposure to water-soluble nickel and lung cancer risk. Weaker effects were suggested for exposure to arsenic at the refinery and for occupational exposures outside the refinery for 15 years or more. No detectable excess risk was found for refinery exposure to asbestos or sulfuric acid mists, and no dose-related increase in risk was seen from cobalt. Exposure to water-soluble nickel remained the most likely explanation for the excess lung cancer risk in the cohort. Other occupational exposures did not confound the strong dose-related effect of nickel to any appreciable degree.

  14. Danube refinery operates under complex air regulations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Aalund, L.R.

    1994-05-30

    A good example of a major refinery coping with German environmental regulations is the Erdoel-Raffinerie Neustadt GmbH Co. (ERN) refinery near the town of Neustadt a.d. Donau, or Neustadt on the Danube, in lower Bavaria. The 7 million tons/year (144,000 b/d) complex refinery deals regularly with nearly 30 different crude oils, arriving via the Italian port of Trieste and the Trans Alpine Line from the Middle East, North and West Africa, Venezuela, and the North Sea. Table 1 is a listing of these crudes and some of their characteristics that are important in the refinery's environmental program. ERN is inmore » a relatively isolated pastoral setting of fields and forests about 1[1/2] miles south of the Danube. Hops which go into the world famous Bavarian beers are a major crop in the region and the refinery is only 2 miles from a spa popular since the Romans occupied the Danube valley. German physicians still send patients there to relax, drink the waters, and breathe the country air for a variety of ailments. In short, ERN is in a high-profile setting that demands maximum attention be paid to environmental matters. The paper first describes the various German regulations that affect refineries, then discusses the monitoring and waste processing operations being performed by the ERN refinery.« less

  15. Lead poisoning in precious metals refinery assayers: a failure to notify workers at high risk.

    PubMed

    Kern, D G

    1994-05-01

    Lead poisoning in a precious metals refinery fire assayer and a routine OSHA inspection prompted an investigation of the index facility, a survey of the industry, and efforts to notify assayers of this previously unrecognized hazard. Air and blood samples were obtained at the index facility. Management personnel from all fire assay laboratories in Rhode Island and southern Massachusetts were interviewed. The industry's trade association, OSHA, NIOSH, trade unions, and the media were asked to assist in a nationwide notification effort. Assayers at the index facility had excessive exposures to lead due to an age-old, lead-based assaying method that remains the industry gold standard. Blood lead levels of the three assayers (mean 61.3 micrograms/dl, range 48-86 micrograms/dl) were considerably higher than those of 16 other refinery workers (mean 27.4 micrograms/dl, range 13-49 micrograms/dl). The industry survey revealed inadequate knowledge of both the lead hazard and the applicability of the OSHA lead standard. Notification efforts failed in large part due to economic obstacles. The notification of workers at high risk of lead exposure and the eradication of occupational lead poisoning will require greater attention to economic forces.

  16. Large scale and long term application of bioslurping: the case of a Greek petroleum refinery site.

    PubMed

    Gidarakos, E; Aivalioti, M

    2007-11-19

    This paper presents the course and the remediation results of a 4-year application of bioslurping technology on the subsurface of a Greek petroleum refinery, which is still under full operation and has important and complicated subsurface contamination problems, mainly due to the presence of light non-aqueous phase liquids (LNAPL). About 55 wells are connected to the central bioslurping unit, while a mobile bioslurping unit is also used whenever and wherever is necessary. Moreover, there are about 120 additional wells for the monitoring of the subsurface of the facilities that cover a total area of 1,000,000 m(2). An integrated monitoring program has also been developed and applied on the site, including frequent LNAPL layer depth and thickness measurements, conduction of bail-down and recovery tests, sampling and chemical analysis of the free oil phase, etc., so as to evaluate the remediation technique's efficiency and ensure a prompt tracing of any new potential leak. Despite the occurrence of new leaks within the last 4 years and the observed entrapment of LNAPL in the vadoze zone, bioslurping has managed to greatly restrict the original plume within certain and relatively small parts of the refinery facilities.

  17. Theoretical and Experimental Investigation of Opinion Dynamics in Small Social Networks

    DTIC Science & Technology

    2016-07-01

    Sciences, Social Informatics and Telecommunications Engineering 2013 96 M. Gabbay described. Section 4 illustrates the application of the methodology...group of cyber terrorists has already gained access to multiple computers. The attack will attempt to disrupt and destroy a large oil refinery; at

  18. Photochemical ozone formation from petroleum refinery emissions

    NASA Astrophysics Data System (ADS)

    Sexton, Ken; Westberg, Hal

    Atmospheric emissions from the Marathon oil refinery at Robinson, Illinois were investigated during June and July 1977. Surface and aerial measurements were used to provide an integrated, three dimensional monitoring network. Concentrations of ozone, oxides of nitrogen, sulfur dioxide, methane, carbon dioxide, individual non-methane hydrocarbons and halocarbons were recorded on a routine basis. In addition, meteorological parameters such as wind speed, wind direction, solar radiation and mixing height were also measured. The field monitoring study focused on three major areas: (1) characterization of gaseous components within the refinery effluent, especially nonmethane hydrocarbons and nitrogen oxides; (2) natural sunlight bag irradiation experiments to examine ozone forming potential of refinery emissions and (3) aerial measurements of changes in plume chemistry during the first six to eight hours of transport. Results indicate levels of hydrocarbons and nitrogen oxides were elevated downwind of the refinery. Concentrations within the effluent exceeded background values by as much as 300- and 10-fold, respectively. Irradiations of captured refinery emissions suggest excess photochemical ozone can be produced in the first 6 h, with amounts varying according to NMHC/NO x, ratios and initial NMHC concentrations. Real-time measurements on board the aircraft documented instances of ozone buildup in the refinery plume as it drifted downwind.

  19. Refinery spreadsheet highlights microcomputer process applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tucker, M.A.

    1984-01-23

    Microcomputer applications in the process areas at Chevron U.S.A. refineries and at the Chevron Research Co. illustrate how the microcomputer has changed the way we do our jobs. This article will describe major uses of the microcomputer as a personal work tool in Chevron process areas. It will also describe how and why many of Chevron's microcomputer applications were developed and their characteristics. One of our earliest microcomputer applications, developed in late 1981, was an electronic spreadsheet program using a small desktop microcomputer. It was designed to help a refinery planner prepare monthly plans for a small portion of onemore » of our major refineries. This particular microcomputer had a tiny 4-in. screen, and the reports were several strips of print-out from the microcomputer's 3-in.-wide internal printer taped together. In spite of these archaic computing conditions, it was a successful application. It automated what had been very tedious and time-consuming calculations with a pencil, a calculator, and a great deal of erasing. It eliminated filling out large ''horseblanket'' reports. The electronic spreadsheet was also flexible; the planner could easily change the worksheet to match new operating constraints, new process conditions, and new feeds and products. Fortunately, within just a few months, this application graduated to a similar electronic spreadsheet program on a new, more powerful microcomputer. It had a bigger display screen and a letter-size printer. The same application is still in use today, although it has been greatly enhanced and altered to match extensive plant modifications. And there are plans to expand it again onto yet another, more powerful microcomputer.« less

  20. 40 CFR 80.140 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... post-refinery component in order to create detergent-additized gasoline or detergent-additized post..., a truck or individual storage tank) at which detergent is blended with gasoline or post-refinery... post-refinery component blended with gasoline, in order to control deposit formation. Carrier oil means...

  1. Mild Biomass Liquefaction Process for Economic Production of Stabilized Refinery-Ready Bio-oil

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gangwal, Santosh; Meng, Jiajia; McCabe, Kevin

    Southern Research (SR) in cooperation with U.S. Department of Energy (DOE), Bioenergy Technology Office (BETO), investigated a biomass liquefaction process for economic production of stabilized refinery-ready bio-oil. The project was awarded by DOE under a Funding Opportunity Announcement (DE-FOA-0000686) for Bio-oil Stabilization and Commoditization that intended to evaluate the feasibility of using bio-oil as a potential feedstock in an existing petroleum refinery. SR investigated Topic Area 1 of the FOA at Technology Readiness Level 2-3 to develop thermochemical liquefaction technologies for producing a bio-oil feedstock from high-impact biomass that can be utilized within a petroleum refinery. Bio-oil obtained from fastmore » pyrolysis of biomass is a green intermediate that can be further upgraded into a biofuel for blending in a petroleum refinery using a hydro-deoxygenation (HDO) route. Co-processing pyrolysis bio-oil in a petroleum refinery is an attractive approach to leverage the refinery’s existing capital. However, the petroleum industry is reluctant to accept pyrolysis bio-oil because of a lack of a standard definition for an acceptable bio-oil feedstock in existing refinery processes. Also per BETO’s multiyear program plan, fast pyrolysis-based bio-fuel is presently not cost competitive with petroleum-based transportation fuels. SR aims to develop and demonstrate a cost-effective low-severity thermal liquefaction and hydrodeoxygenation (HDO) process to convert woody biomass to stabilized bio-oils that can be directly blended with hydrotreater input streams in a petroleum refinery for production of gasoline and/or diesel range hydrocarbons. The specific project objectives are to demonstrate the processes at laboratory scale, characterize the bio-oil product and develop a plan in partnership with a refinery company to move the technology towards commercialization.« less

  2. 40 CFR 73.90 - Allowance allocations for small diesel refineries.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Allowance allocations for small diesel... PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Small Diesel Refineries § 73.90 Allowance allocations for small diesel refineries. (a) Initial certification of eligibility. The certifying official of a...

  3. 40 CFR 73.90 - Allowance allocations for small diesel refineries.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Allowance allocations for small diesel... PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Small Diesel Refineries § 73.90 Allowance allocations for small diesel refineries. (a) Initial certification of eligibility. The certifying official of a...

  4. 77 FR 63320 - Agency Information Collection Activities: Petroleum Refineries in Foreign Trade Sub-zones

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-16

    ... Activities: Petroleum Refineries in Foreign Trade Sub-zones AGENCY: U.S. Customs and Border Protection... Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act: Petroleum Refineries... CBP is soliciting comments concerning the following information collection: Title: Petroleum...

  5. 75 FR 12168 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Control of Nitrogen...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-15

    ... Boilers and Process Heaters at Petroleum Refineries AGENCY: Environmental Protection Agency (EPA). ACTION... from Industrial Boilers and Process Heaters at Petroleum Refineries to Delaware's Regulation No. 1142... Nitrogen Oxide Emissions from Industrial Boilers and Process Heaters at Petroleum Refineries. The...

  6. Hazardous Waste Cleanup: Sunoco Incorporated - R&M Eagle Point Refinery in Westville, New Jersey

    EPA Pesticide Factsheets

    Sunoco, Inc. - R&M Eagle Point Refinery is located on Route 295 & 130 in Westville, West Deptford Township, New Jersey. The site is a 1,000-acre oil refinery on the Delaware River, 550 acres of which is an active production area.

  7. 40 CFR 80.1238 - How is a refinery's or importer's average benzene concentration determined?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... average benzene concentration determined? 80.1238 Section 80.1238 Protection of Environment ENVIRONMENTAL... Benzene Gasoline Benzene Requirements § 80.1238 How is a refinery's or importer's average benzene concentration determined? (a) The average benzene concentration of gasoline produced at a refinery or imported...

  8. 40 CFR 80.1238 - How is a refinery's or importer's average benzene concentration determined?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... average benzene concentration determined? 80.1238 Section 80.1238 Protection of Environment ENVIRONMENTAL... Benzene Gasoline Benzene Requirements § 80.1238 How is a refinery's or importer's average benzene concentration determined? (a) The average benzene concentration of gasoline produced at a refinery or imported...

  9. 40 CFR 80.1238 - How is a refinery's or importer's average benzene concentration determined?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... average benzene concentration determined? 80.1238 Section 80.1238 Protection of Environment ENVIRONMENTAL... Benzene Gasoline Benzene Requirements § 80.1238 How is a refinery's or importer's average benzene concentration determined? (a) The average benzene concentration of gasoline produced at a refinery or imported...

  10. 40 CFR 80.1238 - How is a refinery's or importer's average benzene concentration determined?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... average benzene concentration determined? 80.1238 Section 80.1238 Protection of Environment ENVIRONMENTAL... Benzene Gasoline Benzene Requirements § 80.1238 How is a refinery's or importer's average benzene concentration determined? (a) The average benzene concentration of gasoline produced at a refinery or imported...

  11. 40 CFR 80.1238 - How is a refinery's or importer's average benzene concentration determined?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... average benzene concentration determined? 80.1238 Section 80.1238 Protection of Environment ENVIRONMENTAL... Benzene Gasoline Benzene Requirements § 80.1238 How is a refinery's or importer's average benzene concentration determined? (a) The average benzene concentration of gasoline produced at a refinery or imported...

  12. 76 FR 80934 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-27

    ... Activities; Submission to OMB for Review and Approval; Comment Request; NSPS for Petroleum Refineries... electronic docket, go to http://www.regulations.gov . Title: NSPS for Petroleum Refineries (Renewal). ICR... Source Performance Standards (NSPS) for Petroleum Refineries, the affected entities are subject to the...

  13. 77 FR 10507 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-22

    ... Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Petroleum Refineries... electronic docket, go to www.regulations.gov . Title: NESHAP for Petroleum Refineries (Renewal). ICR Numbers.... Abstract: The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Petroleum Refineries...

  14. 40 CFR 80.1441 - Small refinery exemption.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Renewable Fuel Standard § 80.1441 Small refinery exemption... § 80.1465(a)), is exempt from January 1, 2010 through December 31, 2010 from the renewable fuel... effective upon approval, by EPA, of a small refinery application. The application must contain all of the...

  15. Health risk assessments for alumina refineries.

    PubMed

    Donoghue, A Michael; Coffey, Patrick S

    2014-05-01

    To describe contemporary air dispersion modeling and health risk assessment methodologies applied to alumina refineries and to summarize recent results. Air dispersion models using emission source and meteorological data have been used to assess ground-level concentrations (GLCs) of refinery emissions. Short-term (1-hour and 24-hour average) GLCs and annual average GLCs have been used to assess acute health, chronic health, and incremental carcinogenic risks. The acute hazard index can exceed 1 close to refineries, but it is typically less than 1 at neighboring residential locations. The chronic hazard index is typically substantially less than 1. The incremental carcinogenic risk is typically less than 10(-6). The risks of acute health effects are adequately controlled, and the risks of chronic health effects and incremental carcinogenic risks are negligible around referenced alumina refineries.

  16. Constraining the ship contribution to the aerosol of the central Mediterranean

    NASA Astrophysics Data System (ADS)

    Becagli, Silvia; Anello, Fabrizio; Bommarito, Carlo; Cassola, Federico; Calzolai, Giulia; Di Iorio, Tatiana; di Sarra, Alcide; Gómez-Amo, José-Luis; Lucarelli, Franco; Marconi, Miriam; Meloni, Daniela; Monteleone, Francesco; Nava, Silvia; Pace, Giandomenico; Severi, Mirko; Massimiliano Sferlazzo, Damiano; Traversi, Rita; Udisti, Roberto

    2017-02-01

    Particulate matter with aerodynamic diameters lower than 10 µm, (PM10) aerosol samples were collected during summer 2013 within the framework of the Chemistry and Aerosol Mediterranean Experiment (ChArMEx) at two sites located north (Capo Granitola) and south (Lampedusa Island), respectively, of the main Mediterranean shipping route in the Straight of Sicily. The PM10 samples were collected with 12 h time resolutions at both sites. Selected metals, main anions, cations and elemental and organic carbon were determined. The evolution of soluble V and Ni concentrations (typical markers of heavy fuel oil combustion) was related to meteorology and ship traffic intensity in the Straight of Sicily, using a high-resolution regional model for calculation of back trajectories. Elevated concentration of V and Ni at Capo Granitola and Lampedusa are found to correspond with air masses from the Straight of Sicily and coincidences between trajectories and positions of large ships; the vertical structure of the planetary boundary layer also appears to play a role, with high V values associated with strong inversions and a stable boundary layer. The V concentration was generally lower at Lampedusa than at Capo Granitola V, where it reached a peak value of 40 ng m-3. Concentrations of rare earth elements (REEs), La and Ce in particular, were used to identify possible contributions from refineries, whose emissions are also characterized by elevated V and Ni amounts; refinery emissions are expected to display high La / Ce and La / V ratios due to the use of La in the fluid catalytic converter systems. In general, low La / Ce and La / V ratios were observed in the PM samples. The combination of the analyses based on chemical markers, air mass trajectories and ship routes allows us to unambiguously identify the large role of the ship source in the Straight of Sicily. Based on the sampled aerosols, ratios of the main aerosol species arising from ship emission with respect to V were estimated with the aim of deriving a lower limit for the total ship contribution to PM10. The estimated minimum ship emission contributions to PM10 were 2.0 µg m-3 at Lampedusa and 3.0 µg m-3 at Capo Granitola, corresponding with 11 and 8.6 % of PM10, respectively.

  17. A Comprehensive Study on Chlorella pyrenoidosa for Phenol Degradation and its Potential Applicability as Biodiesel Feedstock and Animal Feed.

    PubMed

    Das, Bhaskar; Mandal, Tapas K; Patra, Sanjukta

    2015-07-01

    The present work evaluates the phenol degradative performance of microalgae Chlorella pyrenoidosa. High-performance liquid chromatography (HPLC) analysis showed that C. pyrenoidosa degrades phenol completely up to 200 mg/l. It could also metabolize phenol in refinery wastewater. Biokinetic parameters obtained are the following: growth kinetics, μ max (media) > μ max (refinery wastewater), K s(media) < K s(refinery wastewater), K I(media) > K I(refinery wastewater); degradation kinetics, q max (media) > q max (refinery wastewater), K s(media) < K s(refinery wastewater), K I(media) > K I(refinery wastewater). The microalgae could cometabolize the alkane components present in refinery wastewater. Fourier transform infrared (FTIR) fingerprinting of biomass indicates intercellular phenol uptake and breakdown into its intermediates. Phenol was metabolized as an organic carbon source leading to higher specific growth rate of biomass. Phenol degradation pathway was elucidated using HPLC, liquid chromatography-mass spectrometry (LC-MS) and ultraviolet-visible (UV-visible) spectrophotometry. It involved both ortho- and meta-pathway with prominence of ortho-pathway. SEM analysis shows that cell membrane gets wrinkled on phenol exposure. Phenol degradation was growth and photodependent. Infrared analysis shows increased intracellular accumulation of neutral lipids opening possibility for utilization of spent biomass as biodiesel feedstock. The biomass after lipid extraction could be used as protein supplement in animal feed owing to enhanced protein content. The phenol remediation ability coupled with potential applicability of the spent biomass as biofuel feedstock and animal feed makes it a potential candidate for an environmentally sustainable process.

  18. Revegetation strategies for bauxite refinery residue: a case study of Alcan Gove in Northern Territory, Australia.

    PubMed

    Wehr, J Bernhard; Fulton, Ian; Menzies, Neal W

    2006-03-01

    Alumina extraction from bauxite ore with strong alkali produces waste bauxite refinery residue consisting of residue sand and red mud. The amount and composition of refinery residue depend on the purity of the bauxite ore and extraction conditions, and differs between refineries. The refinery residue is usually stored in engineered disposal areas that eventually have to be revegetated. This is challenging because of the alkaline and sodic nature of the residue. At Alcan Gove's bauxite refinery in Gove, Northern Territory, Australia, research into revegetation of bauxite residue has been conducted since the mid-1970s. In this review, we discuss approaches taken by Alcan Gove to achieve revegetation outcomes (soil capping of refinery residue) on wet-slurry disposal areas. Problems encountered in the past include poor drainage and water logging during the wet season, and salt scalding and capillary rise during the dry season. The amount of available water in the soil capping is the most important determinant of vegetation survival in the seasonally dry climate. Vegetation cover was found to prevent deterioration of the soil cover by minimising capillary rise of alkalinity from the refinery residue. The sodicity and alkalinity of the residue in old impoundments has diminished slightly over the 25 years since it was deposited. However, development of a blocky structure in red mud, presumably due to desiccation, allows root penetration, thereby supplying additional water to salt and alkali-tolerant plant species. This has led to the establishment of an ecosystem that approaches a native woodland.

  19. 77 FR 44685 - ConocoPhillips Company, Trainer Refinery, Including On-Site Leased Workers From Shrack, Young...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-30

    ..., Trainer Refinery, Including On-Site Leased Workers From Shrack, Young, and Associates, Inc., and Project... applicable to workers and former workers of ConocoPhillips Company, Trainer Refinery, Trainer, Pennsylvania..., and heavy oil. The subject worker group includes on-site leased workers from Shrack, Young, and...

  20. 40 CFR 80.210 - What sulfur standards apply to gasoline downstream from refineries and importers?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... gasoline downstream from refineries and importers? 80.210 Section 80.210 Protection of Environment... Gasoline Sulfur Gasoline Sulfur Standards § 80.210 What sulfur standards apply to gasoline downstream from refineries and importers? The sulfur standard for gasoline at any point in the gasoline distribution system...

  1. 40 CFR 80.210 - What sulfur standards apply to gasoline downstream from refineries and importers?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... gasoline downstream from refineries and importers? 80.210 Section 80.210 Protection of Environment... Gasoline Sulfur Gasoline Sulfur Standards § 80.210 What sulfur standards apply to gasoline downstream from refineries and importers? The sulfur standard for gasoline at any point in the gasoline distribution system...

  2. 40 CFR 80.210 - What sulfur standards apply to gasoline downstream from refineries and importers?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... gasoline downstream from refineries and importers? 80.210 Section 80.210 Protection of Environment... Gasoline Sulfur Gasoline Sulfur Standards § 80.210 What sulfur standards apply to gasoline downstream from refineries and importers? The sulfur standard for gasoline at any point in the gasoline distribution system...

  3. 40 CFR 80.210 - What sulfur standards apply to gasoline downstream from refineries and importers?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... gasoline downstream from refineries and importers? 80.210 Section 80.210 Protection of Environment... Gasoline Sulfur Gasoline Sulfur Standards § 80.210 What sulfur standards apply to gasoline downstream from refineries and importers? The sulfur standard for gasoline at any point in the gasoline distribution system...

  4. 40 CFR 80.210 - What sulfur standards apply to gasoline downstream from refineries and importers?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... gasoline downstream from refineries and importers? 80.210 Section 80.210 Protection of Environment... Gasoline Sulfur Gasoline Sulfur Standards § 80.210 What sulfur standards apply to gasoline downstream from refineries and importers? The sulfur standard for gasoline at any point in the gasoline distribution system...

  5. 40 CFR 80.156 - Liability for violations of the interim detergent program controls and prohibitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... base gasoline component, the detergent component, or the detergent-additized post-refinery component of... component of any post-refinery component or gasoline in the storage tank containing gasoline found to be in... evidence, that the gasoline or detergent carrier caused the violation. (2) Post-refinery component non...

  6. 76 FR 64943 - Proposed Cercla Administrative Cost Recovery Settlement; ACM Smelter and Refinery Site, Located...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-19

    ... Settlement; ACM Smelter and Refinery Site, Located in Cascade County, MT AGENCY: Environmental Protection... projected future response costs concerning the ACM Smelter and Refinery NPL Site (Site), Operable Unit 1..., Helena, MT 59626. Mr. Sturn can be reached at (406) 457-5027. Comments should reference the ACM Smelter...

  7. Cost and Performance Report for LNAPL Recovery: Multi-Phase Extraction and Dual-Pump Recovery of LNAPL at the BP Former Amoco Refinery, Sugar Creek, MO

    EPA Pesticide Factsheets

    This case study was prepared to summarize the recovery of light non-aqueous phase liquid (LNAPL) at two locations at the BP Products of North America, Inc. Former Amoco Refinery (former refinery) in Sugar Creek, Missouri.

  8. 76 FR 80358 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-23

    ... Activities; Submission to OMB for Review and Approval; Comment Request; NSPS for Petroleum Refineries... information about the electronic docket, go to www.regulations.gov . Title: NSPS for Petroleum Refineries... Petroleum Refineries were promulgated on March 8, 1974, and amended on October 2, 1990. These regulations...

  9. 40 CFR 80.94 - Requirements for gasoline produced at foreign refineries.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... was not imported into the United States. (f) Load port independent sampling, testing and refinery... FRGAS to the United States; and (v) Determine the date and time the vessel departs the port serving the... departure of the vessel from the port serving the foreign refinery; (ii) Prepare a volume-weighted vessel...

  10. 40 CFR 80.94 - Requirements for gasoline produced at foreign refineries.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... was not imported into the United States. (f) Load port independent sampling, testing and refinery... FRGAS to the United States; and (v) Determine the date and time the vessel departs the port serving the... departure of the vessel from the port serving the foreign refinery; (ii) Prepare a volume-weighted vessel...

  11. 40 CFR 60.693-2 - Alternative standards for oil-water separators.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... for VOC Emissions From Petroleum Refinery Wastewater Systems § 60.693-2 Alternative standards for oil... installation of the floating roof and introduction of refinery wastewater and once every 5 years thereafter. (B... refinery wastewater and once every year thereafter. (iv) The owner or operator shall make necessary repairs...

  12. 40 CFR 60.693-2 - Alternative standards for oil-water separators.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... for VOC Emissions From Petroleum Refinery Wastewater Systems § 60.693-2 Alternative standards for oil... installation of the floating roof and introduction of refinery wastewater and once every 5 years thereafter. (B... refinery wastewater and once every year thereafter. (iv) The owner or operator shall make necessary repairs...

  13. 40 CFR 60.693-2 - Alternative standards for oil-water separators.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... for VOC Emissions From Petroleum Refinery Wastewater Systems § 60.693-2 Alternative standards for oil... installation of the floating roof and introduction of refinery wastewater and once every 5 years thereafter. (B... refinery wastewater and once every year thereafter. (iv) The owner or operator shall make necessary repairs...

  14. 40 CFR 60.693-2 - Alternative standards for oil-water separators.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... for VOC Emissions From Petroleum Refinery Wastewater Systems § 60.693-2 Alternative standards for oil... installation of the floating roof and introduction of refinery wastewater and once every 5 years thereafter. (B... refinery wastewater and once every year thereafter. (iv) The owner or operator shall make necessary repairs...

  15. Identification of the odour and chemical composition of alumina refinery air emissions.

    PubMed

    Coffey, P S; Ioppolo-Armanios, M

    2004-01-01

    Alcoa World Alumina Australia has undertaken comprehensive air emissions monitoring aimed at characterising and quantifying the complete range of emissions to the atmosphere from Bayer refining of alumina at its Western Australian refineries. To the best of our knowledge, this project represents the most complete air emissions inventory of a Bayer refinery conducted in the worldwide alumina industry. It adds considerably to knowledge of air emission factors available for use in emissions estimation required under national pollutant release and transfer registers (NPRTs), such as the Toxic Releases Inventory, USA, and the National Pollutant Inventory, Australia. It also allows the preliminary identification of the key chemical components responsible for characteristic alumina refinery odours and the contribution of these components to the quality, or hedonic tone, of the odours. The strength and acceptability of refinery odours to employees and neighbours appears to be dependent upon where and in what proportion the odorous gases have been emitted from the refineries. This paper presents the results of the programme and develops a basis for classifying the odour properties of the key emission sources in the alumina-refining process.

  16. Health Risk Assessments for Alumina Refineries

    PubMed Central

    Coffey, Patrick S.

    2014-01-01

    Objective: To describe contemporary air dispersion modeling and health risk assessment methodologies applied to alumina refineries and to summarize recent results. Methods: Air dispersion models using emission source and meteorological data have been used to assess ground-level concentrations (GLCs) of refinery emissions. Short-term (1-hour and 24-hour average) GLCs and annual average GLCs have been used to assess acute health, chronic health, and incremental carcinogenic risks. Results: The acute hazard index can exceed 1 close to refineries, but it is typically less than 1 at neighboring residential locations. The chronic hazard index is typically substantially less than 1. The incremental carcinogenic risk is typically less than 10−6. Conclusions: The risks of acute health effects are adequately controlled, and the risks of chronic health effects and incremental carcinogenic risks are negligible around referenced alumina refineries. PMID:24806721

  17. Spatial variation in mortality risk for haematological malignancies near a petrochemical refinery: a population-based case-control study

    PubMed Central

    Di Salvo, Francesca; Meneghini, Elisabetta; Vieira, Veronica; Baili, Paolo; Mariottini, Mauro; Baldini, Marco; Micheli, Andrea; Sant, Milena

    2015-01-01

    Introduction The study investigated the geographic variation of mortality risk for hematological malignancies (HMs) in order to identify potential high-risk areas near an Italian petrochemical refinery. Material and methods A population-based case-control study was conducted and residential histories for 171 cases and 338 sex- and age-matched controls were collected. Confounding factors were obtained from interviews with consenting relatives for 109 HM deaths and 267 controls. To produce risk mortality maps, two different approaches were applied. We mapped (1) adptive kernel density relative risk estimation (KDE) for case-control studies which estimates a spatial relative risk function using the ratio between cases and controls’ densities, and (2) estimated odds ratios for case-control study data using generalized additive models (GAMs) to smooth the effect of location, a proxy for exposure, while adjusting for confounding variables. Results No high-risk areas for HM mortality were identified among all subjects (men and women combined), by applying both approaches. Using the adaptive KDE approach, we found a significant increase in death risk only among women in a large area 2–6 km southeast of the refinery and the application of GAMs also identified a similarly-located significant high-risk area among women only (global p-value<0.025). Potential confounding risk factors we considered in the GAM did not alter the results. Conclusion Both approaches identified a high-risk area close to the refinery among women only. Those spatial methods are useful tools for public policy management to determine priority areas for intervention. Our findings suggest several directions for further research in order to identify other potential environmental exposures that may be assessed in forthcoming studies based on detailed exposure modeling. PMID:26073202

  18. Feasibility study for hydrocarbon complex in southern seaboard. Petroleum Authority of Thailand

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This study, conducted by Fluor Daniel, was funded by the U.S. Trade and Development Agency, on behalf of the Petroleum Authority of Thailand. The primary objective of the study was to investigate the economic viability of the related facilities and determine how each could help to industrialize and build up the Southern Seaboard area of Thailand. The focus of the report is in three areas including; Crude Oil Transportation System, Refinery, and Petrochemical Complex. Another objective of the study was to offer an alternative for large crude carrier traffic by proposing the completion of a crude oil pipeline. The reportmore » is divided into the following sections: (1) Executive Summary; (2) Introduction; (3) Crude Oil Transportation System; (4) Refinery Project; (5) Petrochemical Complex; (6) Key Issues & Considerations; (7) Financial Evaluations; (8) Summary & Conclusions.« less

  19. Successful performance of a refinery with Eureka unit

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hirotani, Y.; Takeuchi, T.; Miyabuchi, Y.

    1981-03-01

    Since starting in February, 1976, 3,400,000 Kl of vacuum residue (13,000,000 Kl of crude oil equivalent) has been successfully processed in the Eureka unit of Fuji Oil refinery complex and more than 2,500,000 Kl of cracked oil and 1,000,000 tons of pitch have been produced. The operation rate has been 94 to 98% except for the annual shutdown period for inspection. The cracked oil is easily desulfurized to make naphta, diesel oil and a large amount of gas oil (low sulfur fuel oil, 0.1 wt % sulfur). As for the desulfurization of cracked oil, the increase in H/sub 2/ consumptionmore » and the decline of catalyst life are observed. However, the operation conditions do not differ much from those for straight run fractions. Processing both hydrotreated and untreated cracked heavy oil (CHO) with FCC unit has proved to be possible. In case of untreated CHO, however, it causes a slight increase in make up catalyst and coke yield. It is demonstrated that heavy crude oils, such as Bachaquero, can effectively be processed in this system. No additional pollution problems have occurred by introducing an Eureka unit to the refinery, although it is located in the district where the most stringent environmental regulations are urged.« less

  20. Bioremediation by composting of heavy oil refinery sludge in semiarid conditions.

    PubMed

    Marín, José A; Moreno, José L; Hernández, Teresa; García, Carlos

    2006-06-01

    The present work attempts to ascertain the efficacy of low cost technology (in our case, composting) as a bioremediation technique for reducing the hydrocarbon content of oil refinery sludge with a large total hydrocarbon content (250-300 g kg(-1)), in semiarid conditions. The oil sludge was produced in a refinery sited in SE Spain The composting system designed, which involved open air piles turned periodically over a period of 3 months, proved to be inexpensive and reliable. The influence on hydrocarbon biodegradation of adding a bulking agent (wood shavings) and inoculation of the composting piles with pig slurry (a liquid organic fertiliser which adds nutrients and microbial biomass to the pile) was also studied. The most difficult part during the composting process was maintaining a suitable level of humidity in the piles. The most effective treatment was the one in which the bulking agent was added, where the initial hydrocarbon content was reduced by 60% in 3 months, compared with the 32% reduction achieved without the bulking agent. The introduction of the organic fertiliser did not significantly improve the degree of hydrocarbon degradation (56% hydrocarbon degraded). The composting process undoubtedly led to the biodegradation of toxic compounds, as was demonstrated by ecotoxicity tests using luminescent bacteria and tests on plants in Petri dishes.

  1. A case-control study to investigate the association between exposure to benzene and deaths from leukaemia in oil refinery workers.

    PubMed

    Rushton, L; Alderson, M R

    1981-01-01

    All deaths with a mention of leukaemia on the death certificate, in men employed over a period of 25 years of 8 oil refineries in the U.K. were identified. The potential benzene exposure of these cases was compared with that of two sets of controls selected from the total refinery population. One set of controls was matched for refinery and year of birth, the other set was matched for refinery, year of birth nd length of service. No information was available on measurement of benzene in the work environment but a job history was obtained from refinery personnel records for all cases and controls. This was used to allocate each man to a benzene exposure level of "low", "medium", or "high". There was no overall excess of deaths from leukaemia when compared with the expectation from national rates. There was also no excess of cytological types of leukaemia which have been shown to be particularly associated with benzene exposure. However, the risk for those men with medium or high exposure relative to the risk for those with low benzene exposure approached a significance (P=0.05) when length of service was taken into account. If there were an increased risk of leukaemia due to benzene exposure, it could have only been one that affected a very small proportion of men within the refinery workforce.

  2. The Implementation and Maintenance of a Behavioral Safety Process in a Petroleum Refinery

    ERIC Educational Resources Information Center

    Myers, Wanda V.; McSween, Terry E.; Medina, Rixio E.; Rost, Kristen; Alvero, Alicia M.

    2010-01-01

    A values-centered and team-based behavioral safety process was implemented in a petroleum oil refinery. Employee teams defined the refinery's safety values and related practices, which were used to guide the process design and implementation. The process included (a) a safety assessment; (b) the clarification of safety-related values and related…

  3. 40 CFR 80.1339 - Who is not eligible for the provisions for small refiners?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... eligible for the hardship provisions for small refiners: (a) A refiner with one or more refineries built... employees or crude capacity is due to operational changes at the refinery or a company sale or... refinery processing units. (e)(1) A small refiner approved under § 80.1340 that subsequently ceases...

  4. 33 CFR 165.T09-0333 - Safety zone; Marathon Oil Refinery construction, Rouge River, Detroit, MI.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety zone; Marathon Oil Refinery construction, Rouge River, Detroit, MI. 165.T09-0333 Section 165.T09-0333 Navigation and Navigable... Coast Guard District § 165.T09-0333 Safety zone; Marathon Oil Refinery construction, Rouge River...

  5. 40 CFR 80.1240 - How is a refinery's or importer's compliance with the gasoline benzene requirements of this...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... compliance with the gasoline benzene requirements of this subpart determined? 80.1240 Section 80.1240... FUELS AND FUEL ADDITIVES Gasoline Benzene Gasoline Benzene Requirements § 80.1240 How is a refinery's or importer's compliance with the gasoline benzene requirements of this subpart determined? (a) A refinery's...

  6. 40 CFR 80.596 - How is a refinery motor vehicle diesel fuel volume baseline calculated?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false How is a refinery motor vehicle diesel... Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Recordkeeping and Reporting Requirements § 80.596 How is a refinery motor vehicle diesel fuel volume baseline calculated? (a) For purposes...

  7. 40 CFR 80.596 - How is a refinery motor vehicle diesel fuel volume baseline calculated?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How is a refinery motor vehicle diesel... Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Recordkeeping and Reporting Requirements § 80.596 How is a refinery motor vehicle diesel fuel volume baseline calculated? (a) For purposes...

  8. EISA Section 526: Impacts on DESC Supply

    DTIC Science & Technology

    2009-03-01

    molecules, pro- ducing a slate of liquids and solids, including petrochemical products, which then are transported to markets. Refineries are...sands crude are estimated to have life-cycle emissions exceeding those from conventional oil and under some interpretations of section 526, might be...Supplying Refineries , 2003–2006.............................................. 3-2 Figure 3-2. U.S. Operating Refineries by PADD, 2006

  9. Mechanism of removal of undesirable residual amylase, insoluble starch, and select colorants from refinery streams by powdered activated carbons

    USDA-ARS?s Scientific Manuscript database

    There is a need in the world-wide sugar industry to find a practical and economical solution to remove or inactivate residual alpha-amylases that are high temperature stable from factory or refinery streams. A survey of refineries that used amylase and had activated carbon systems for decolorization...

  10. 40 CFR 80.1240 - How is a refinery's or importer's compliance with the gasoline benzene requirements of this...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... compliance with the gasoline benzene requirements of this subpart determined? 80.1240 Section 80.1240... FUELS AND FUEL ADDITIVES Gasoline Benzene Gasoline Benzene Requirements § 80.1240 How is a refinery's or importer's compliance with the gasoline benzene requirements of this subpart determined? (a) A refinery's...

  11. 40 CFR 80.1240 - How is a refinery's or importer's compliance with the gasoline benzene requirements of this...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... compliance with the gasoline benzene requirements of this subpart determined? 80.1240 Section 80.1240... FUELS AND FUEL ADDITIVES Gasoline Benzene Gasoline Benzene Requirements § 80.1240 How is a refinery's or importer's compliance with the gasoline benzene requirements of this subpart determined? (a) A refinery's...

  12. 40 CFR 80.1240 - How is a refinery's or importer's compliance with the gasoline benzene requirements of this...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... compliance with the gasoline benzene requirements of this subpart determined? 80.1240 Section 80.1240... FUELS AND FUEL ADDITIVES Gasoline Benzene Gasoline Benzene Requirements § 80.1240 How is a refinery's or importer's compliance with the gasoline benzene requirements of this subpart determined? (a) A refinery's...

  13. 40 CFR 80.1240 - How is a refinery's or importer's compliance with the gasoline benzene requirements of this...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... compliance with the gasoline benzene requirements of this subpart determined? 80.1240 Section 80.1240... FUELS AND FUEL ADDITIVES Gasoline Benzene Gasoline Benzene Requirements § 80.1240 How is a refinery's or importer's compliance with the gasoline benzene requirements of this subpart determined? (a) A refinery's...

  14. 40 CFR 80.285 - Who may generate credits under the ABT program?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... who produce gasoline from crude oil, and are: (i) Refiners who establish a sulfur baseline under § 80.295 for a refinery; (ii) Foreign refiners for refineries with an approved baseline under § 80.94, or refineries with baselines established in accordance with § 80.290(d); or (iii) Small refiners for any...

  15. 40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

  16. 40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

  17. 40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

  18. 40 CFR 80.205 - How is the annual refinery or importer average and corporate pool average sulfur level determined?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... average and corporate pool average sulfur level determined? 80.205 Section 80.205 Protection of... ADDITIVES Gasoline Sulfur Gasoline Sulfur Standards § 80.205 How is the annual refinery or importer average and corporate pool average sulfur level determined? (a) The annual refinery or importer average and...

  19. 40 CFR 80.855 - What is the compliance baseline for refineries or importers with insufficient data?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false What is the compliance baseline for refineries or importers with insufficient data? 80.855 Section 80.855 Protection of Environment ENVIRONMENTAL... infeasible, on a cost and/or technological basis, for the refinery to comply with the compliance baseline...

  20. 40 CFR 80.855 - What is the compliance baseline for refineries or importers with insufficient data?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false What is the compliance baseline for refineries or importers with insufficient data? 80.855 Section 80.855 Protection of Environment ENVIRONMENTAL... infeasible, on a cost and/or technological basis, for the refinery to comply with the compliance baseline...

  1. 40 CFR 80.855 - What is the compliance baseline for refineries or importers with insufficient data?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false What is the compliance baseline for refineries or importers with insufficient data? 80.855 Section 80.855 Protection of Environment ENVIRONMENTAL... infeasible, on a cost and/or technological basis, for the refinery to comply with the compliance baseline...

  2. 40 CFR 80.855 - What is the compliance baseline for refineries or importers with insufficient data?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false What is the compliance baseline for refineries or importers with insufficient data? 80.855 Section 80.855 Protection of Environment ENVIRONMENTAL... infeasible, on a cost and/or technological basis, for the refinery to comply with the compliance baseline...

  3. 40 CFR 80.855 - What is the compliance baseline for refineries or importers with insufficient data?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false What is the compliance baseline for refineries or importers with insufficient data? 80.855 Section 80.855 Protection of Environment ENVIRONMENTAL... infeasible, on a cost and/or technological basis, for the refinery to comply with the compliance baseline...

  4. Urinary excretion of platinum from South African precious metals refinery workers.

    PubMed

    Linde, Stephanus J L; Franken, Anja; du Plessis, Johannes L

    2018-03-30

    Urinary platinum (Pt) excretion is a reliable biomarker for occupational Pt exposure and has been previously reported for precious metals refinery workers in Europe but not for South Africa, the world's largest producer of Pt. This study aimed to quantify the urinary Pt excretion of South African precious metals refinery workers. Spot urine samples were collected from 40 workers (directly and indirectly exposed to Pt) at two South African precious metals refineries on three consecutive mornings prior to their shifts. Urine samples were analysed for Pt using inductively coupled plasma-mass spectrometry and were corrected for creatinine content. The urinary Pt excretion of workers did not differ significantly between sampling days. Urinary Pt excretions ranged from <0.1 to 3.0 µg Pt/g creatinine with a geometric mean of 0.21 µg Pt/g creatinine (95% CI 0.17 to 0.26 µg Pt/g creatinine). The work area (P=0.0006; η 2 =0.567) and the number of years workers were employed at the refineries (P=0.003; η 2 =0.261) influenced their urinary Pt excretion according to effect size analyses. Directly exposed workers had significantly higher urinary Pt excretion compared with indirectly exposed workers (P=0.007). The urinary Pt excretion of South African precious metals refinery workers reported in this study is comparable with that of seven other studies conducted in precious metals refineries and automotive catalyst plants in Europe. The Pt body burden of workers is predominantly determined by their work area, years of employment in the refineries and whether they are directly or indirectly exposed to Pt. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  5. Control of occupational exposure to phenol in industrial wastewater treatment plant of a petroleum refinery in Alexandria, Egypt: An intervention application case study.

    PubMed

    Zaki, Gehan R; El-Marakby, Fadia A; Ramadan, Alaa El-Din K; Issa, Ahmed I; Nofal, Faten H

    2016-11-01

    Phenol exposure is one of the hazards in the industrial wastewater treatment basin of any refinery. It additively interacts with hydrogen sulfide emitted from the wastewater basin. Consequently, its concentration should be greatly lower than its threshold limit value. The present study aimed at controlling occupational exposure to phenol in the work environment of wastewater treatment plant in a refinery by reducing phenolic compounds in the industrial wastewater basin. This study was conducted on both laboratory and refinery scales. The first was completed by dividing each wastewater sample from the outlets of different refinery units into three portions; the first was analyzed for phenolic compounds. The second and third were for laboratory scale charcoal and bacterial treatments. The two methods were compared regarding their simplicities, design, and removal efficiencies. Accordingly, bacterial treatment by continuous flow of sewage water containing Pseudomonas Aeruginosa was used for refinery scale treatment. Laboratory scale treatment of phenolic compounds revealed higher removal efficiency of charcoal [100.0(0.0) %] than of bacteria [99.9(0.013) %]. The refinery scale bacterial treatment was [99.8(0.013) %] efficient. Consequently, level of phenol in the work environment after refinery-scale treatment [0.069(0.802) mg/m(3)] was much lower than that before [5.700(26.050) mg/m(3)], with removal efficiency of [99.125(2.335) %]. From the present study, we can conclude that bacterial treatment of phenolic compounds in industrial wastewater of the wastewater treatment plant using continuous flow of sewage water containing Pseudomonas Aeruginosa reduces the workers' exposure to phenol.

  6. More evidence of unpublished industry studies of lead smelter/refinery workers.

    PubMed

    Sullivan, Marianne

    2015-01-01

    Lead smelter/refinery workers in the US have had significant exposure to lead and are an important occupational group to study to understand the health effects of chronic lead exposure in adults. Recent research found evidence that studies of lead smelter/refinery workers have been conducted but not published. This paper presents further evidence for this contention. To present further evidence of industry conducted, unpublished epidemiologic studies of lead smelter/refinery workers and health outcomes. Historical research relying on primary sources such as internal industry documents and published studies. ASARCO smelter/refinery workers were studied in the early 1980s and found to have increased risk of lung cancer and stroke in one study, but not in another. Because occupational lead exposure is an on-going concern for US and overseas workers, all epidemiologic studies should be made available to evaluate and update occupational health and safety standards.

  7. More evidence of unpublished industry studies of lead smelter/refinery workers

    PubMed Central

    2015-01-01

    Background Lead smelter/refinery workers in the US have had significant exposure to lead and are an important occupational group to study to understand the health effects of chronic lead exposure in adults. Recent research found evidence that studies of lead smelter/refinery workers have been conducted but not published. This paper presents further evidence for this contention. Objectives To present further evidence of industry conducted, unpublished epidemiologic studies of lead smelter/refinery workers and health outcomes. Methods Historical research relying on primary sources such as internal industry documents and published studies. Results ASARCO smelter/refinery workers were studied in the early 1980s and found to have increased risk of lung cancer and stroke in one study, but not in another. Conclusions Because occupational lead exposure is an on-going concern for US and overseas workers, all epidemiologic studies should be made available to evaluate and update occupational health and safety standards. PMID:26070220

  8. 40 CFR 421.326 - Pretreatment standards for new sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... uranium processed in the refinery Chromium (total) 27.14 11.00 Copper 93.88 44.74 Nickel 40.34 27.14... uranium processed in the refinery Chromium (total) 1.689 0.685 Copper 5.844 2.785 Nickel 2.511 1.689... per million pounds) of uranium processed in the refinery Chromium (total) 2.357 0.955 Copper 8.152 3...

  9. 40 CFR 421.326 - Pretreatment standards for new sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... uranium processed in the refinery Chromium (total) 27.14 11.00 Copper 93.88 44.74 Nickel 40.34 27.14... uranium processed in the refinery Chromium (total) 1.689 0.685 Copper 5.844 2.785 Nickel 2.511 1.689... per million pounds) of uranium processed in the refinery Chromium (total) 2.357 0.955 Copper 8.152 3...

  10. 33 CFR 165.770 - Security Zone: HOVENSA Refinery, St. Croix, U.S. Virgin Islands.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., St. Croix, U.S. Virgin Islands. 165.770 Section 165.770 Navigation and Navigable Waters COAST GUARD... § 165.770 Security Zone: HOVENSA Refinery, St. Croix, U.S. Virgin Islands. (a) Regulated area. The Coast Guard is establishing a security zone in and around the HOVENSA Refinery on the south coast of St. Croix...

  11. 33 CFR 165.766 - Security Zone: HOVENSA Refinery, St. Croix, U.S. Virgin Islands.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., St. Croix, U.S. Virgin Islands. 165.766 Section 165.766 Navigation and Navigable Waters COAST GUARD... § 165.766 Security Zone: HOVENSA Refinery, St. Croix, U.S. Virgin Islands. (a) Regulated area. The Coast Guard is establishing a security zone in and around the HOVENSA Refinery on the south coast of St. Croix...

  12. Recovering selenium from copper refinery slimes

    NASA Astrophysics Data System (ADS)

    Hyvärinen, Olli; Lindroos, Leo; Yllö, Erkki

    1989-07-01

    The selenium contained within copper refinery slimes may be recovered advantageously by roasting at about 600°C. While roasting in air is inefficient, roasting in a sulfating atmosphere enables practically complete selenium recovery. Based on laboratory tests, a new selenium recovery process was adopted at Outokumpu Copper Refinery. In this process, sulfation is achieved by feeding sulfur dioxide and oxygen into the roasting furnace.

  13. Lymphohaematopoietic malignancy around all industrial complexes that include major oil refineries in Great Britain.

    PubMed

    Wilkinson, P; Thakrar, B; Walls, P; Landon, M; Falconer, S; Grundy, C; Elliott, P

    1999-09-01

    To examine the incidence of lymphohaematopoietic malignancy around industrial complexes that include major oil refineries in Great Britain after recent public and scientific concern of possible carcinogenic hazards of emissions from the petrochemical industry. Small area study of the incidence of lymphohaematopoietic malignancies, 1974-91, within 7.5 km of all 11 oil refineries (grouped into seven sites) in Great Britain that were operational by the early 1970s and processed more than two million tonnes of crude oil in 1993. Combined analysis of data from all seven sites showed no significant (p < 0.05) increase in risk of these malignancies within 2 km or 7.5 km. Hodgkin's lymphoma, but no other malignancy, showed evidence (p = 0.02) of a decline in risk with distance from refineries, but there was an apparent deficit of cases of multiple myeloma near the refineries (p = 0.04). There was no evidence of association between residence near oil refineries and leukaemias, or non-Hodgkin's lymphoma. A weak positive association was found between risk of Hodgkin's disease and proximity to major petrochemical industry, and a negative association with multiple myeloma, which may be chance findings within the context of multiple statistical testing.

  14. Source Characterization of Volatile Organic Compounds Affecting the Air Quality in a Coastal Urban Area of South Texas

    PubMed Central

    Sanchez, Marciano; Karnae, Saritha; John, Kuruvilla

    2008-01-01

    Selected Volatile Organic Compounds (VOC) emitted from various anthropogenic sources including industries and motor vehicles act as primary precursors of ozone, while some VOC are classified as air toxic compounds. Significantly large VOC emission sources impact the air quality in Corpus Christi, Texas. This urban area is located in a semi-arid region of South Texas and is home to several large petrochemical refineries and industrial facilities along a busy ship-channel. The Texas Commission on Environmental Quality has setup two continuous ambient monitoring stations (CAMS 633 and 634) along the ship channel to monitor VOC concentrations in the urban atmosphere. The hourly concentrations of 46 VOC compounds were acquired from TCEQ for a comprehensive source apportionment study. The primary objective of this study was to identify and quantify the sources affecting the ambient air quality within this urban airshed. Principal Component Analysis/Absolute Principal Component Scores (PCA/APCS) was applied to the dataset. PCA identified five possible sources accounting for 69% of the total variance affecting the VOC levels measured at CAMS 633 and six possible sources affecting CAMS 634 accounting for 75% of the total variance. APCS identified natural gas emissions to be the major source contributor at CAMS 633 and it accounted for 70% of the measured VOC concentrations. The other major sources identified at CAMS 633 included flare emissions (12%), fugitive gasoline emissions (9%), refinery operations (7%), and vehicle exhaust (2%). At CAMS 634, natural gas sources were identified as the major source category contributing to 31% of the observed VOC. The other sources affecting this site included: refinery operations (24%), flare emissions (22%), secondary industrial processes (12%), fugitive gasoline emissions (8%) and vehicle exhaust (3%). PMID:19139530

  15. Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Goldberg, Marshall

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on modelmore » add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.« less

  16. Lead Transport into Bayou Trepagnier Wetlands in Louisiana, USA

    Treesearch

    Margaret S. Devall; Leonard B. Thien; Erik Ellgaard; George Flowers

    2006-01-01

    Establishment of a petroleum refinery in 1916 near the headwaters of Bayou Trepagnier with subsequent dredging of the bayou resulted in spoil banks containing high levels of Pb. A large swamp abuts the eastern bank of the bayou. Cores were taken from 15 baldcypress [Taxodium distichum (L.) Richard] trees growing in the swamp along a 610-m transect (...

  17. Current situation of oil refinery in Bulgaria

    NASA Astrophysics Data System (ADS)

    Vershkova, Elena; Petkova, Petinka; Grinkevich, Anastasia

    2016-09-01

    This article deals with the classification approach for oil refineries in international practices. Criteria of refinery estimation group, including its financial status estimation, have been investigated. The analysis object is “Lukoil Neftochim Bourgas” AD (LNCHB) activity. This company is a leading enterprise in Bulgaria. The analysis of LNCHB operating: energy intensity index; index of operating costs and return on investment index have been performed.

  18. Need total sulfur content? Use chemiluminescence

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kubala, S.W.; Campbell, D.N.; DiSanzo, F.P.

    Regulations issued by the United States Environmental Protection Agency require petroleum refineries to reduce or control the amount of total sulfur present in their refined products. These legislative requirements have led many refineries to search for online instrumentation that can produce accurate and repeatable total sulfur measurements within allowed levels. Several analytical methods currently exist to measure total sulfur content. They include X-ray fluorescence (XRF), microcoulometry, lead acetate tape, and pyrofluorescence techniques. Sulfur-specific chemiluminescence detection (SSCD) has recently received much attention due to its linearity, selectivity, sensitivity, and equimolar response. However, its use has been largely confined to the areamore » of gas chromatography. This article focuses on the special design considerations and analytical utility of an SSCD system developed to determine total sulfur content in gasoline. The system exhibits excellent linearity and selectivity, the ability to detect low minimum levels, and an equimolar response to various sulfur compounds. 2 figs., 2 tabs.« less

  19. Beyond Texas City: the state of process safety in the unionized U.S. oil refining industry.

    PubMed

    McQuiston, Thomas H; Lippin, Tobi Mae; Bradley-Bull, Kristin; Anderson, Joseph; Beach, Josie; Beevers, Gary; Frederick, Randy J; Frederick, James; Greene, Tammy; Hoffman, Thomas; Lefton, James; Nibarger, Kim; Renner, Paul; Ricks, Brian; Seymour, Thomas; Taylor, Ren; Wright, Mike

    2009-01-01

    The March 2005 British Petroleum (BP) Texas City Refinery disaster provided a stimulus to examine the state of process safety in the U.S. refining industry. Participatory action researchers conducted a nation-wide mail-back survey of United Steelworkers local unions and collected data from 51 unionized refineries. The study examined the prevalence of highly hazardous conditions key to the Texas City disaster, refinery actions to address those conditions, emergency preparedness and response, process safety systems, and worker training. Findings indicate that the key highly hazardous conditions were pervasive and often resulted in incidents or near-misses. Respondents reported worker training was insufficient and less than a third characterized their refineries as very prepared to respond safely to a hazardous materials emergency. The authors conclude that the potential for future disasters plagues the refining industry. In response, they call for effective proactive OSHA regulation and outline ten urgent and critical actions to improve refinery process safety.

  20. [Subjective evaluation of the effect of meteorological factors on the psychophysical status of workers of a large industrial plant].

    PubMed

    Kocur, J; Gruszczyński, W

    1983-01-01

    The authors have conducted an epidemiological inquiry in a randomly selected group of 171 workers of a large refining and petrochemical plant. The investigation demonstrated a high meteorotropic sensitivity varying with the employment length, higher in women and those treated for various psychic and somatic disturbances. High meteorotropic sensitivity of refinery plant workers made the authors raise the hypothesis of the effect of chemical working environment pollution upon the physiological functions of the organism.

  1. Post Oil America and a Renewable Energy Policy Leads to the Abrogation of the Middle East to China

    DTIC Science & Technology

    2009-04-01

    three issues. First is the fear that a terrorist incident on an oil rig or large refinery could disrupt the oil supply. The second is the concern...nuclear plants , wind farms, hydroelectric dams, and large solar arrays. Second, the economic vitality of the global community depends on the major...condensate, but excluding natural gas plant liquids).18 Multiply that amount by the average price of crude in 2006 of $66.4319 per barrel and the oil

  2. 40 CFR 80.1344 - What provisions are available to a non-small refiner that acquires one or more of a small refiner...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-small refiner that acquires one or more of a small refiner's refineries? 80.1344 Section 80.1344... available to a non-small refiner that acquires one or more of a small refiner's refineries? (a) In the case of a refiner that is not an approved small refiner under § 80.1340 and that acquires a refinery from...

  3. Retrospective Geospatial Modeling of PM10 Exposures from Open Burning at Joint Base Balad, Iraq

    DTIC Science & Technology

    2011-03-01

    calculation was performed to determine individual dose to school children in a defined school district area, to emissions from a petrochemical refinery , in...domestic exposure, and occupational exposure. In a final example, resource constraints and unknown emissions from a refinery prevented direct...of a Petrochemical Refinery : a Cross- sectional Study. Environmental Health , 8 (45). 194 Wilcox, J., Entezam, B., Molenaar, B., & Shreeve, T

  4. Mortality among workers in a nickel refinery and alloy manufacturing plant in West Virginia.

    PubMed

    Enterline, P E; Marsh, G M

    1982-06-01

    Workers from a nickel refinery at Huntington, W. Va., which received a nickel matte from smelters in Ontario, Canada, during 1922-47 were studied for excesses in sinonasal and lung cancers. Other workers who were in a nickel alloy production plant operated in conjunction with the refinery but who did not work in the refinery were also studied. Evidence is presented on the existence of a nasal cancer hazard and possibly a lung cancer hazard among workers employed in the nickel refinery. Two of these workers developed a sinonasal cancer. Evidence of a respiratory cancer hazard in other parts of the plant before or after 1947 is weak, and the observed results could be due to chance variations from the mortality experience of the standard reference populations. Among nonrefinery workers hired while the nickel refinery was in operation, 2 employees had a probable sinonasal cancer. The first employee worked in a high-temperature conversion process where nickel carbonate was decomposed to nickel oxide, and the second employee is believed to have done maintenance work in the plant where this process was used. For both cohorts combined there were slight overall excesses in lung, stomach, and prostate cancers with some evidence of a dose-response relationship for these cancers.

  5. Potential for reducing air pollution from oil refineries.

    PubMed

    Karbassi, A R; Abbasspour, M; Sekhavatjou, M S; Ziviyar, F; Saeedi, M

    2008-10-01

    Islamic Republic of Iran has to invest 95 billion US$ for her new oil refineries to the year 2045. At present, the emission factors for CO(2), NO( x ) and SO(2) are 3.5, 4.2 and 119 times higher than British refineries, respectively. In order to have a sustainable development in Iranian oil refineries, the government has to set emission factors of European Community as her goal. At present CO(2) per Gross Domestic Production (GDP) in the country is about 2.7 kg CO(2) as 1995's USD value that should be reduced to 1.25 kg CO(2)/GDP in the year 2015. Total capital investment for such reduction is estimated at 346 million USD which is equal to 23 USD/ton of CO(2). It is evident that mitigation of funds set by Clean Development Mechanism (3 to 7 USD/tons of CO(2)) is well below the actual capital investment needs. Present survey shows that energy efficiency promotion potential in all nine Iranian oil refineries is about 165,677 MWh/year through utilization of more efficient pumps and compressors. Better management of boilers in all nine refineries will lead to a saving of 273 million m(3) of natural gas per year.

  6. Linking performance benchmarking of refinery process chemicals to refinery key performance indicators

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cook, J.M.; Nieman, L.D.

    In 1977 Solomon Associates, Inc. issued its first study of refining in the US entitled, Comparative Performance Analysis for Fuel Product Refineries, most commonly referred to as the Solomon Study, or the Fuels Study. In late 1993, both the Water and Waste Water Management, and Petroleum Divisions of Nalco Chemical Company came to the same conclusion; that they must have a better understanding of the Solomon Study process, and have some input to this system of measurement. The authors first approached Solomon Associates with the idea that a specific study should be done of specialty chemicals used in the refinery.more » They felt that this would result in two studies, one for water treatment applications, and one for process. The water treatment study came first, and was completed in 1993 with the United States Petroleum Refineries Water Treatment Performance Analysis for Operating Year 1993. The process study, entitled United States Petroleum Refinery Process Treatment Performance Analysis for Operating Years 1994--95 will be issued in the 2nd quarter of this year by Nalco/Exxon Energy Chemicals, L.P, which includes the combined resources of the former Petroleum Division of Nalco Chemical Company (including the petroleum related portions of most of its overseas companies), and the petroleum related specialty chemical operations of Exxon Chemical on a global basis. What follows is a recap of the process study focus, some examples of output, and comment on both the linkage to key refinery operating indicators, as well as the perception of the effect of such measurement on the supplier relationship of the future.« less

  7. Fuel quality processing study, volume 1

    NASA Astrophysics Data System (ADS)

    Ohara, J. B.; Bela, A.; Jentz, N. E.; Syverson, H. T.; Klumpe, H. W.; Kessler, R. E.; Kotzot, H. T.; Loran, B. L.

    1981-04-01

    A fuel quality processing study to provide a data base for an intelligent tradeoff between advanced turbine technology and liquid fuel quality, and also, to guide the development of specifications of future synthetic fuels anticipated for use in the time period 1985 to 2000 is given. Four technical performance tests are discussed: on-site pretreating, existing refineries to upgrade fuels, new refineries to upgrade fuels, and data evaluation. The base case refinery is a modern Midwest refinery processing 200,000 BPD of a 60/40 domestic/import petroleum crude mix. The synthetic crudes used for upgrading to marketable products and turbine fuel are shale oil and coal liquids. Of these syncrudes, 50,000 BPD are processed in the existing petroleum refinery, requiring additional process units and reducing petroleum feed, and in a new refinery designed for processing each syncrude to produce gasoline, distillate fuels, resid fuels, and turbine fuel, JPGs and coke. An extensive collection of synfuel properties and upgrading data was prepared for the application of a linear program model to investigate the most economical production slate meeting petroleum product specifications and turbine fuels of various quality grades. Technical and economic projections were developed for 36 scenarios, based on 4 different crude feeds to either modified existing or new refineries operated in 2 different modes to produce 7 differing grades of turbine fuels. A required product selling price of turbine fuel for each processing route was calculated. Procedures and projected economics were developed for on-site treatment of turbine fuel to meet limitations of impurities and emission of pollutants.

  8. Fuel quality processing study, volume 1

    NASA Technical Reports Server (NTRS)

    Ohara, J. B.; Bela, A.; Jentz, N. E.; Syverson, H. T.; Klumpe, H. W.; Kessler, R. E.; Kotzot, H. T.; Loran, B. L.

    1981-01-01

    A fuel quality processing study to provide a data base for an intelligent tradeoff between advanced turbine technology and liquid fuel quality, and also, to guide the development of specifications of future synthetic fuels anticipated for use in the time period 1985 to 2000 is given. Four technical performance tests are discussed: on-site pretreating, existing refineries to upgrade fuels, new refineries to upgrade fuels, and data evaluation. The base case refinery is a modern Midwest refinery processing 200,000 BPD of a 60/40 domestic/import petroleum crude mix. The synthetic crudes used for upgrading to marketable products and turbine fuel are shale oil and coal liquids. Of these syncrudes, 50,000 BPD are processed in the existing petroleum refinery, requiring additional process units and reducing petroleum feed, and in a new refinery designed for processing each syncrude to produce gasoline, distillate fuels, resid fuels, and turbine fuel, JPGs and coke. An extensive collection of synfuel properties and upgrading data was prepared for the application of a linear program model to investigate the most economical production slate meeting petroleum product specifications and turbine fuels of various quality grades. Technical and economic projections were developed for 36 scenarios, based on 4 different crude feeds to either modified existing or new refineries operated in 2 different modes to produce 7 differing grades of turbine fuels. A required product selling price of turbine fuel for each processing route was calculated. Procedures and projected economics were developed for on-site treatment of turbine fuel to meet limitations of impurities and emission of pollutants.

  9. Oil refinery hazardous effluents minimization by membrane filtration: An on-site pilot plant study.

    PubMed

    Santos, Bruno; Crespo, João G; Santos, Maria António; Velizarov, Svetlozar

    2016-10-01

    Experiments for treating two different types of hazardous oil refinery effluents were performed in order to avoid/minimize their adverse impacts on the environment. First, refinery wastewater was subjected to ultrafiltration using a ceramic membrane, treatment, which did not provide an adequate reduction of the polar oil and grease content below the maximal contaminant level allowed. Therefore the option of reducing the polar oil and grease contamination at its main emission source point in the refinery - the spent caustic originating from the refinery kerosene caustic washing unit - using an alkaline-resistant nanofiltration polymeric membrane treatment was tested. It was found that at a constant operating pressure and temperature, 99.9% of the oil and grease and 97.7% of the COD content were rejected at this emission point. Moreover, no noticeable membrane fouling or permeate flux decrease were registered until a spent caustic volume concentration factor of 3. These results allow for a reuse of the purified permeate in the refinery operations, instead of a fresh caustic solution, which besides the improved safety and environmentally related benefits, can result in significant savings of 1.5 M€ per year at the current prices for the biggest Portuguese oil refinery. The capital investment needed for nanofiltration treatment of the spent caustic is estimated to be less than 10% of that associated with the conventional wet air oxidation treatment of the spent caustic that is greater than 9 M€. The payback period was estimated to be 1.1 years. The operating costs for the two treatment options are similar, but the reuse of the nanofiltration spent caustic concentrate for refinery pH control applications can further reduce the operating expenditures. Overall, the pilot plant results obtained and the process economics evaluation data indicate a safer, environmentally friendly and highly competitive solution offered by the proposed nanofiltration treatment, thus representing a promising alternative to the use of conventional spent caustic treatment units. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Energy efficiency and greenhouse gas emission intensity of petroleum products at U.S. refineries.

    PubMed

    Elgowainy, Amgad; Han, Jeongwoo; Cai, Hao; Wang, Michael; Forman, Grant S; DiVita, Vincent B

    2014-07-01

    This paper describes the development of (1) a formula correlating the variation in overall refinery energy efficiency with crude quality, refinery complexity, and product slate; and (2) a methodology for calculating energy and greenhouse gas (GHG) emission intensities and processing fuel shares of major U.S. refinery products. Overall refinery energy efficiency is the ratio of the energy present in all product streams divided by the energy in all input streams. Using linear programming (LP) modeling of the various refinery processing units, we analyzed 43 refineries that process 70% of total crude input to U.S. refineries and cover the largest four Petroleum Administration for Defense District (PADD) regions (I, II, III, V). Based on the allocation of process energy among products at the process unit level, the weighted-average product-specific energy efficiencies (and ranges) are estimated to be 88.6% (86.2%-91.2%) for gasoline, 90.9% (84.8%-94.5%) for diesel, 95.3% (93.0%-97.5%) for jet fuel, 94.5% (91.6%-96.2%) for residual fuel oil (RFO), and 90.8% (88.0%-94.3%) for liquefied petroleum gas (LPG). The corresponding weighted-average, production GHG emission intensities (and ranges) (in grams of carbon dioxide-equivalent (CO2e) per megajoule (MJ)) are estimated to be 7.8 (6.2-9.8) for gasoline, 4.9 (2.7-9.9) for diesel, 2.3 (0.9-4.4) for jet fuel, 3.4 (1.5-6.9) for RFO, and 6.6 (4.3-9.2) for LPG. The findings of this study are key components of the life-cycle assessment of GHG emissions associated with various petroleum fuels; such assessment is the centerpiece of legislation developed and promulgated by government agencies in the United States and abroad to reduce GHG emissions and abate global warming.

  11. ENVIRONMENTAL IMPACT ASSESSMENT OF BIO-ETHANOL MADE FROM RICE STRAW CONSIDERING LAND OCCUPATION EFFECTS ON ECOSYSTEM

    NASA Astrophysics Data System (ADS)

    Motoshita, Masaharu; Yang, Cuifen; Genchi, Yutaka; Tahara, Kiyotaka; Inaba, Atsushi

    Most of rice straw produced as a byproduct is not or low utilized in Japan. However, it may be available for the production of bio-ethanol without threatening food supply because of its characteristics as one of the lignocellulosic materials. Though it has already been revealed in previous studies that bio-ethanol made from rice straw can contribute to reducing energy consumption and repressing greenhouse gas emissions, effects on ecosystem due to land occupation for rice straw production and ethanol refinery plant have not been evaluated. Thus, environmental impacts of bio-ethanol made from rice straw including effects on ecosystem caused by land occupation were evaluated in this study. Some differences among three representative assessment methods could be found in results of the effect on ecosystem due to land occupation for rice straw production and ethanol refinery plant. However, it is common among all assessment methods that the effect on ecosystem caused by land occupation dominates large part of total environmental impact of ethanol made from rice straw (72-83% of total impact). Bio-ethanol made from rice straw showed larger environmental impact compared to that of gasoline due to land occupation. The improvement of the operating rate and the productivity of ethanol refinery plants is especially necessary for repressing the environm ental impacts related to bio-ethanol production made from rice straw.

  12. Around Marshall

    NASA Image and Video Library

    2000-09-09

    NASA's Michoud Assembly Facility, located in eastern New Orleans, Louisiana, is an 832 acre site that is a government-owned, contractor-operated component of the George C. Marshall Space Flight Center (MSFC). The facility was acquired by NASA in 1961 at the recommendation of Dr. Wernher von Braun and his rocket team in Huntsville Alabama. The cavernous plant served as the assembly facility for the Saturn launch vehicles and most recently the external tank (ET) used for the Space Shuttle Program. The facility features one of the world's biggest manufacturing plants with 43 acres under one roof and a port with deep-water access for the transportation of large space structures. When completed, space hardware is towed on a barge across the Gulf of Mexico, around Florida and up to Kennedy Space Center. The original tract of land was part of a 34,500 acre French Royal land grant to local merchant, Gilbert Antoine de St. Maxent in 1763. Later, the land was acquired by French transplant Antoine Michoud, the son of Napoleon's Administrator of Domains, who moved to the city in 1827. Michoud operated a sugar cane plantation and refinery on the site until his death in 1863. His heirs continued operating the refinery and kept the original St. Maxent estate intact into the 20th century. Two brick smokestacks from the original refinery still stand before the Michoud facility today.

  13. Around Marshall

    NASA Image and Video Library

    2000-09-09

    NASA's Michoud Assembly Facility, located in eastern New Orleans, Louisiana, is an 832 acre site that is a government-owned, contractor-operated component of the George C. Marshall Space Flight Center (MSFC). The facility was acquired by NASA in 1961 at the recommendation of Dr. Wernher von Braun and his rocket team in Huntsville Alabama. The cavernous plant served as the assembly facility for the Saturn launch vehicles and most recently the external tank (ET) used for the Space Shuttle Program. The facility features one of the world's biggest manufacturing plants with 43 acres under one roof and a port with deep-water access for the transportation of large space structures. When completed, space hardware is towed on a barge across the Gulf of Mexico, around Florida and up to Kennedy Space Center. The original tract of land was part of a 34,500 acre French Royal land grant to local merchant, Gilbert Antoine de St. Maxent in 1763. Later, the land was acquired by French transplant Antoine Michoud, the son of Napoleon's Administrator of Domains, who moved to the city in 1827. Michoud operated a sugar cane plantation and refinery on the site until his death in 1863. His heirs continued operating the refinery and kept the original St. Maxent estate intact into the 20th century. Visible on the right, is one of two brick smokestacks from the original refinery that still stand before the Michoud facility today.

  14. The Michoud Assembly Facility (MAF)

    NASA Technical Reports Server (NTRS)

    2000-01-01

    NASA's Michoud Assembly Facility, located in eastern New Orleans, Louisiana, is an 832 acre site that is a government-owned, contractor-operated component of the George C. Marshall Space Flight Center (MSFC). The facility was acquired by NASA in 1961 at the recommendation of Dr. Wernher von Braun and his rocket team in Huntsville Alabama. The cavernous plant served as the assembly facility for the Saturn launch vehicles and most recently the external tank (ET) used for the Space Shuttle Program. The facility features one of the world's biggest manufacturing plants with 43 acres under one roof and a port with deep-water access for the transportation of large space structures. When completed, space hardware is towed on a barge across the Gulf of Mexico, around Florida and up to Kennedy Space Center. The original tract of land was part of a 34,500 acre French Royal land grant to local merchant, Gilbert Antoine de St. Maxent in 1763. Later, the land was acquired by French transplant Antoine Michoud, the son of Napoleon's Administrator of Domains, who moved to the city in 1827. Michoud operated a sugar cane plantation and refinery on the site until his death in 1863. His heirs continued operating the refinery and kept the original St. Maxent estate intact into the 20th century. Visible on the right, is one of two brick smokestacks from the original refinery that still stand before the Michoud facility today.

  15. The Michoud Assembly Facility (MAF)

    NASA Technical Reports Server (NTRS)

    2000-01-01

    NASA's Michoud Assembly Facility, located in eastern New Orleans, Louisiana, is an 832 acre site that is a government-owned, contractor-operated component of the George C. Marshall Space Flight Center (MSFC). The facility was acquired by NASA in 1961 at the recommendation of Dr. Wernher von Braun and his rocket team in Huntsville Alabama. The cavernous plant served as the assembly facility for the Saturn launch vehicles and most recently the external tank (ET) used for the Space Shuttle Program. The facility features one of the world's biggest manufacturing plants with 43 acres under one roof and a port with deep-water access for the transportation of large space structures. When completed, space hardware is towed on a barge across the Gulf of Mexico, around Florida and up to Kennedy Space Center. The original tract of land was part of a 34,500 acre French Royal land grant to local merchant, Gilbert Antoine de St. Maxent in 1763. Later, the land was acquired by French transplant Antoine Michoud, the son of Napoleon's Administrator of Domains, who moved to the city in 1827. Michoud operated a sugar cane plantation and refinery on the site until his death in 1863. His heirs continued operating the refinery and kept the original St. Maxent estate intact into the 20th century. Two brick smokestacks from the original refinery still stand before the Michoud facility today.

  16. Iran Sanctions

    DTIC Science & Technology

    2014-05-07

    funds the sale to Iran of Indian wheat, pharmaceuticals, rice, sugar , soybeans, auto parts, and other products. Still, there is a large trade...the Persian Gulf coast Sinopec up to $6 billion if new refinery is built Oct. 2009 South Pars Gas Field—Phases 6-8, Gas Sweetening Plant...petrochemical products from Iran. - Niksima Food and Beverage JLT for receiving payments on behalf of Jam Petrochemical Iran Sanctions Congressional

  17. 40 CFR 421.322 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... refinery Chromium 32.270 13.200 Copper 139.300 73.340 Nickel 140.800 93.140 Fluoride 2,567.000 1,459.000... processed in the refinery Chromium (total) 2.009 0.822 Copper 8.675 4.566 Nickel 8.767 5.799 Fluoride 159... pounds) of uranium processed in the refinery Chromium (total) 2.802 1.146 Copper 12.100 6.369 Nickel 12...

  18. 40 CFR 421.322 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... refinery Chromium 32.270 13.200 Copper 139.300 73.340 Nickel 140.800 93.140 Fluoride 2,567.000 1,459.000... processed in the refinery Chromium (total) 2.009 0.822 Copper 8.675 4.566 Nickel 8.767 5.799 Fluoride 159... pounds) of uranium processed in the refinery Chromium (total) 2.802 1.146 Copper 12.100 6.369 Nickel 12...

  19. Geographic Concentration of Oil Infrastructure: Issues and Options

    DTIC Science & Technology

    2007-03-24

    their homes and plants , and destroy ports and refineries , thereby shattering the U.S. economy. The scope, scale, frequency and location of terrorist...for the above reasons. The corridor along the Mississippi River between Baton Rouge and New Orleans is home to six major refineries . These... refineries process more than 1.7 million barrels of oil per day to produce 775 thousand barrels of motor gasoline and 440 million barrels of distillate fuel

  20. Correcting systematic bias and instrument measurement drift with mzRefinery

    DOE PAGES

    Gibbons, Bryson C.; Chambers, Matthew C.; Monroe, Matthew E.; ...

    2015-08-04

    Systematic bias in mass measurement adversely affects data quality and negates the advantages of high precision instruments. We introduce the mzRefinery tool into the ProteoWizard package for calibration of mass spectrometry data files. Using confident peptide spectrum matches, three different calibration methods are explored and the optimal transform function is chosen. After calibration, systematic bias is removed and the mass measurement errors are centered at zero ppm. Because it is part of the ProteoWizard package, mzRefinery can read and write a wide variety of file formats. In conclusion, we report on availability; the mzRefinery tool is part of msConvert, availablemore » with the ProteoWizard open source package at http://proteowizard.sourceforge.net/« less

  1. Personal exposure to benzene and 1,3-butadiene during petroleum refinery turnarounds and work in the oil harbour.

    PubMed

    Akerstrom, M; Almerud, P; Andersson, E M; Strandberg, B; Sallsten, G

    2016-11-01

    Petroleum refinery workers' exposure to the carcinogens benzene and 1,3-butadiene has decreased during normal operations. However, certain occupational groups or events at the refineries still involve a risk of higher exposures. The aim of this study was to examine the personal exposure to benzene and 1,3-butadiene at refinery turnarounds and during work in the oil harbour. Personal exposure measurements of benzene and 1,3-butadiene were taken during work shifts, with a priori assumed higher benzene exposure, using PerkinElmer diffusive samplers filled with Carbopack X. Mean exposure levels were calculated, and repeated exposure measurements, when available, were assessed using mixed effect models. Group and individual compliance with the Swedish occupational exposure limit (OEL) was tested for the different exposure groups. Mean benzene exposure levels for refinery workers during the three measured turnarounds were 150, 610 and 960 µg/m 3 , and mean exposures for oil harbour workers and sewage tanker drivers were 310 and 360 µg/m 3 , respectively. Higher exposures were associated with handling benzene-rich products. Most occupational groups did not comply with the Swedish OEL for benzene nor did the individuals within the groups. The exposure to 1,3-butadiene was very low, between <1 and 3 % of the Swedish OEL. Work within the petroleum refinery industry, with potential exposure to open product streams containing higher fractions of benzene, pose a risk of personal benzene exposures exceeding the OEL. Refinery workers performing these work tasks frequently, such as contractors, sewage tanker drivers and oil harbour workers, need to be identified and protected.

  2. A Study on the Preparation of Regular Multiple Micro-Electrolysis Filler and the Application in Pretreatment of Oil Refinery Wastewater

    PubMed Central

    Yang, Ruihong; ZHU, Jianzhong; Li, Yingliu; Zhang, Hui

    2016-01-01

    Through a variety of material screening experiments, Al was selected as the added metal and constituted a multiple micro-electrolysis system of Fe/C/Al. The metal proportion of alloy-structured filler was also analyzed with the best Fe/C/Al ratio of 3:1:1. The regular Fe/C/Al multiple micro-electrolysis fillers were prepared using a high-temperature anaerobic roasting method. The optimum conditions for oil refinery wastewater treated by Fe/C/Al multiple micro-electrolysis were determined to be an initial pH value of 3, reaction time of 80 min, and 0.05 mol/L Na2SO4 additive concentration. The reaction mechanism of the treatment of oil refinery wastewater by Fe/C/Al micro-electrolysis was investigated. The process of the treatment of oil refinery wastewater with multiple micro-electrolysis conforms to the third-order reaction kinetics. The gas chromatography–mass spectrometry (GC–MS) used to analyze the organic compounds of the oil refinery wastewater before and after treatment and the Ultraviolet–visible spectroscopy (UV–VIS) absorption spectrum analyzed the degradation process of organic compounds in oil refinery wastewater. The treatment effect of Fe/C/Al multiple micro-electrolysis was examined in the continuous experiment under the optimum conditions, which showed high organic compound removal and stable treatment efficiency. PMID:27136574

  3. A Study on the Preparation of Regular Multiple Micro-Electrolysis Filler and the Application in Pretreatment of Oil Refinery Wastewater.

    PubMed

    Yang, Ruihong; Zhu, Jianzhong; Li, Yingliu; Zhang, Hui

    2016-04-29

    Through a variety of material screening experiments, Al was selected as the added metal and constituted a multiple micro-electrolysis system of Fe/C/Al. The metal proportion of alloy-structured filler was also analyzed with the best Fe/C/Al ratio of 3:1:1. The regular Fe/C/Al multiple micro-electrolysis fillers were prepared using a high-temperature anaerobic roasting method. The optimum conditions for oil refinery wastewater treated by Fe/C/Al multiple micro-electrolysis were determined to be an initial pH value of 3, reaction time of 80 min, and 0.05 mol/L Na₂SO₄ additive concentration. The reaction mechanism of the treatment of oil refinery wastewater by Fe/C/Al micro-electrolysis was investigated. The process of the treatment of oil refinery wastewater with multiple micro-electrolysis conforms to the third-order reaction kinetics. The gas chromatography-mass spectrometry (GC-MS) used to analyze the organic compounds of the oil refinery wastewater before and after treatment and the Ultraviolet-visible spectroscopy (UV-VIS) absorption spectrum analyzed the degradation process of organic compounds in oil refinery wastewater. The treatment effect of Fe/C/Al multiple micro-electrolysis was examined in the continuous experiment under the optimum conditions, which showed high organic compound removal and stable treatment efficiency.

  4. HP-GPC characterization of asphalt and modified asphalts from gulf countries and their relation to performance based properties

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wahhab, H.I.A.; Ali, M.F.; Asi, I.M.

    Asphalt producing refineries in the Gulf countries include Ras Tanura and Riyadh (Saudi Arabia), Al-Ahmadi (Kuwait), and BAPCO (Bahrain). Riyadh and Ras Tanura refineries are located in the central and eastern Saudi Arabia respectively. Arabian light crude oil is used to produce 2000 to 3000 tons of asphalt per day using vacuum distillation, air blowing and grade blending techniques to produce 60/70 penetration grade asphalts in each of these two Saudi refineries. All of the asphalt cement used in Saudi Arabia, Qatar and parts of the United Arab Emirates is supplied by Riyadh and Ras Tanura refineries. Al-Ahmadi refinery suppliesmore » all of the asphalt cement needed for construction in the state of Kuwait. Ratwi-Burgan crude off mix is used to produce 750 to 1000 tons of asphalt per day using vacuum distillation and air blowing processes. This study was initiated to evaluate different locally available polymers in order to identify potential polymers to modify asphalts to satisfy the performance requirements in the Gulf countries environmental conditions.« less

  5. Life cycle assessment of gasoline production and use in Chile.

    PubMed

    Morales, Marjorie; Gonzalez-García, Sara; Aroca, Germán; Moreira, María Teresa

    2015-02-01

    Gasoline is the second most consumed fuel in Chile, accounting for 34% of the total fuel consumption in transportation related activities in 2012. Chilean refineries process more than 97% of the total gasoline commercialized in the national market. When it comes to evaluating the environmental profile of a Chilean process or product, the analysis should consider the characteristics of the Chilean scenario for fuel production and use. Therefore, the identification of the environmental impacts of gasoline production turns to be very relevant for the determination of the associated environmental impacts. For this purpose, Life Cycle Assessment has been selected as a useful methodology to assess the ecological burdens derived from fuel-based systems. In this case study, five subsystems were considered under a "well-to-wheel" analysis: crude oil extraction, gasoline importation, refinery, gasoline storage and distribution/use. The distance of 1 km driven by a middle size passenger car was chosen as functional unit. Moreover, volume, economic and energy-based allocations were also considered in a further sensitivity analysis. According to the results, the main hotspots were the refining activities as well as the tailpipe emissions from car use. When detailing by impact category, climate change was mainly affected by the combustion emissions derived from the gasoline use and refining activities. Refinery was also remarkable in toxicity related categories due to heavy metals emissions. In ozone layer and mineral depletion, transport activities played an important role. Refinery was also predominant in photochemical oxidation and water depletion. In terms of terrestrial acidification and marine eutrophication, the combustion emissions from gasoline use accounted for large contributions. This study provides real inventory data for the Chilean case study and the environmental results give insight into their influence of the assessment of products and processes in the country. Moreover, they could be compared with production and distribution schemes in other regions. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Motiva Enterprises LLC Refinery Settlement

    EPA Pesticide Factsheets

    Settlement summary for nine refineries owned by Motiva, Equilon, and the Deer Park Refining Limited Partnership (Shell Deer Park) to assure compliance with major provisions of the Clean Air Act (CAA).

  7. GHGRP Refineries Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Refineries industry.

  8. Risk-informed selection of a highway trajectory in the neighborhood of an oil-refinery.

    PubMed

    Papazoglou, I A; Nivolianitou, Z; Aneziris, O; Christou, M D; Bonanos, G

    1999-06-11

    A methodology for characterizing alternative trajectories of a new highway in the neighborhood of an oil-refinery with respect to the risk to public health is presented. The approach is based on a quantitative assessment of the risk that the storage facilities of flammable materials of the refinery pose to the users of the highway. Physical phenomena with a potential for detrimental consequences to public health such as BLEVE (Boiling Liquid Expanding Vapor Explosion), Unconfined Vapor Cloud Explosion, flash fire and pool fire are considered. Methodological and procedural steps for assessing the individual risk around the tank farm of the oil-refinery are presented. Based on the individual risk, group risk for each alternative highway trajectory is determined. Copyright 1999 Elsevier Science B.V.

  9. Archive of GHGRP Refineries Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Refineries industry.

  10. Respiratory symptoms and lung function in alumina refinery employees.

    PubMed

    Musk, A W; de Klerk, N H; Beach, J R; Fritschi, L; Sim, M R; Benke, G; Abramson, M; McNeil, J J

    2000-04-01

    Employees in alumina refineries are known to be exposed to a number of potential respiratory irritants, particularly caustic mist and bauxite and alumina dusts. To examine the prevalence of work related respiratory symptoms and lung function in alumina refinery employees and relate these to their jobs. 2964 current employees of three alumina refineries in Western Australia were invited to participate in a cross sectional study, and 89% responded. Subjects were given a questionnaire on respiratory symptoms, smoking, and occupations with additional questions on temporal relations between respiratory symptoms and work. Forced expiratory volume in 1 second (FEV(1)) and forced vital capacity (FVC) were measured with a rolling seal spirometer. Atopy was assessed with prick skin tests for common allergens. Associations between work and symptoms were assessed with Cox's regression to estimate prevalence ratios, and between work and lung function with linear regression. Work related wheeze, chest tightness, shortness of breath, and rhinitis were reported by 5.0%, 3.5%, 2.5%, and 9.5% of participants respectively. After adjustment for age, smoking, and atopy, most groups of production employees reported a greater prevalence of work related symptoms than did office employees. After adjustment for age, smoking, height, and atopy, subjects reporting work related wheeze, chest tightness, and shortness of breath had significantly lower mean levels of FEV(1) (186, 162, and 272 ml respectively) than subjects without these symptoms. Prevalence of most work related symptoms was higher at refinery 2 than at the other two refineries, but subjects at this refinery had an adjusted mean FEV(1) >60 ml higher than the others. Significant differences in FVC and FEV(1)/FVC ratio, but not FEV(1), were found between different process groups. There were significant differences in work related symptoms and lung function between process groups and refineries, but these were mostly not consistent. Undefined selection factors and underlying population differences may account for some of these findings but workplace exposures may also contribute. The differences identified between groups were unlikely to be clinically of note.

  11. Respiratory symptoms and lung function in alumina refinery employees

    PubMed Central

    Musk, A; de Klerk, N. H; Beach, J.; Fritschi, L.; Sim, M.; Benke, G.; Abramson, M.; McNeil, J.

    2000-01-01

    OBJECTIVES—Employees in alumina refineries are known to be exposed to a number of potential respiratory irritants, particularly caustic mist and bauxite and alumina dusts. To examine the prevalence of work related respiratory symptoms and lung function in alumina refinery employees and relate these to their jobs.
METHODS—2964 current employees of three alumina refineries in Western Australia were invited to participate in a cross sectional study, and 89% responded. Subjects were given a questionnaire on respiratory symptoms, smoking, and occupations with additional questions on temporal relations between respiratory symptoms and work. Forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) were measured with a rolling seal spirometer. Atopy was assessed with prick skin tests for common allergens. Associations between work and symptoms were assessed with Cox's regression to estimate prevalence ratios, and between work and lung function with linear regression.
RESULTS—Work related wheeze, chest tightness, shortness of breath, and rhinitis were reported by 5.0%, 3.5%, 2.5%, and 9.5% of participants respectively. After adjustment for age, smoking, and atopy, most groups of production employees reported a greater prevalence of work related symptoms than did office employees. After adjustment for age, smoking, height, and atopy, subjects reporting work related wheeze, chest tightness, and shortness of breath had significantly lower mean levels of FEV1 (186, 162, and 272 ml respectively) than subjects without these symptoms. Prevalence of most work related symptoms was higher at refinery 2 than at the other two refineries, but subjects at this refinery had an adjusted mean FEV1 >60 ml higher than the others. Significant differences in FVC and FEV1/FVC ratio, but not FEV1, were found between different process groups.
CONCLUSIONS—There were significant differences in work related symptoms and lung function between process groups and refineries, but these were mostly not consistent. Undefined selection factors and underlying population differences may account for some of these findings but workplace exposures may also contribute. The differences identified between groups were unlikely to be clinically of note.


Keywords: aluminium; alumina; bauxite; caustic mist; occupational epidemiology PMID:10810116

  12. Refinery Upgrading of Hydropyrolysis Oil From Biomass

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Roberts, Michael; Marker, Terry; Ortiz-Toral, Pedro

    Cellulosic and woody biomass can be converted to bio-oils containing less than 10% oxygen by a hydropyrolysis process. Hydropyrolysis is the first step in Gas Technology Institute’s (GTI) integrated Hydropyrolysis and Hydroconversion IH2®. These intermediate bio-oils can then be converted to drop-in hydrocarbon fuels using existing refinery hydrotreating equipment to make hydrocarbon blending components, which are fully compatible with existing fuels. Alternatively, cellulosic or woody biomass can directly be converted into drop-in hydrocarbon fuels containing less than 0.4% oxygen using the IH2 process located adjacent to a refinery or ethanol production facility. Many US oil refineries are actually located nearmore » biomass resources and are a logical location for a biomass to transportation fuel conversion process. The goal of this project was to work directly with an oil refinery partner, to determine the most attractive route and location for conversion of biorenewables to drop in fuels in their refinery and ethanol production network. Valero Energy Company, through its subsidiaries, has 12 US oil refineries and 11 ethanol production facilities, making them an ideal partner for this analysis. Valero is also part of a 50- 50 joint venture with Darling Ingredients called Diamond Green Diesel. Diamond Green Diesel’s production capacity is approximately 11,000 barrels per day of renewable diesel. The plant is located adjacent to Valero’s St Charles, Louisiana Refinery and converts recycled animal fats, used cooking oil, and waste corn oil into renewable diesel. This is the largest renewable diesel plant in the U.S. and has successfully operated for over 2 years For this project, 25 liters of hydropyrolysis oil from wood and 25 liters of hydropyrolysis oils from corn stover were produced. The hydropyrolysis oil produced had 4-10% oxygen. Metallurgical testing of hydropyrolysis liquids was completed by Oak Ridge National Laboratories (Oak Ridge) and showed the hydropyrolysis oils had low acidity and caused almost no corrosion in comparison to pyrolysis oils, which had high acidity and caused significant levels of corrosion.« less

  13. 76 FR 32355 - Notice of Funds Availability (NOFA) Inviting Applications for the Biorefinery Assistance Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-06

    ..., Energy Branch, Attention: BioRefinery Assistance Program, 1400 Independence Avenue, SW., STOP 3225... to USDA's Rural Development National Office: Energy Branch, Attention: BioRefinery Assistance Program...

  14. 40 CFR 60.692-2 - Standards: Individual drain systems.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Emissions From Petroleum Refinery Wastewater Systems § 60.692-2 Standards: Individual drain systems. (a)(1... section. (e) Refinery wastewater routed through new process drains and a new first common downstream...

  15. 40 CFR 60.692-2 - Standards: Individual drain systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Emissions From Petroleum Refinery Wastewater Systems § 60.692-2 Standards: Individual drain systems. (a)(1... section. (e) Refinery wastewater routed through new process drains and a new first common downstream...

  16. 40 CFR 60.692-2 - Standards: Individual drain systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Emissions From Petroleum Refinery Wastewater Systems § 60.692-2 Standards: Individual drain systems. (a)(1... section. (e) Refinery wastewater routed through new process drains and a new first common downstream...

  17. 40 CFR 60.692-2 - Standards: Individual drain systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Emissions From Petroleum Refinery Wastewater Systems § 60.692-2 Standards: Individual drain systems. (a)(1... section. (e) Refinery wastewater routed through new process drains and a new first common downstream...

  18. 40 CFR 60.692-2 - Standards: Individual drain systems.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Emissions From Petroleum Refinery Wastewater Systems § 60.692-2 Standards: Individual drain systems. (a)(1... section. (e) Refinery wastewater routed through new process drains and a new first common downstream...

  19. How to justify small-refinery info/control system modernization

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Haskins, D.E.

    1993-05-01

    Information and control systems modernization can be justified by successful implementation of advanced process control (APC) in nearly all refineries, even the small ones. However, the small refineries require special solutions to meet the challenges of limited resources in both finance and manpower. Based on a number of case studies, a typical small refinery as it operates today is described. A sample information and control system modernization plan is described and the typical cost and benefits show how the project cost can be justified. Business objectives of an HPI plant are to satisfy customers by providing specific products, to satisfymore » the owners by maximizing profits and to satisfy the public by being safe and environmentally correct. Managers have always tried to meet these objectives with functions for the total plant.« less

  20. Refinery suppliers face tough times

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rotman, D.; Walsh, K.

    1997-03-12

    Despite a handful of bright spots in hydroprocessing and petrochemical sectors, economic woes plague much of the refinery and petrochemical catalysts business, as suppliers are feeling the impact of mature markets and refiners` ongoing cost cutting. Industry experts say the doldrums could spur further restructuring in the catalyst business, with suppliers scrambling for market share and jockeying for position in growing sectors. Expect further consolidation over the next several years, says Pierre Bonnifay, president of IFP Enterprises (New York). {open_quotes}There are still too many players for the mature [refinery catalyst] markets.{close_quotes} Others agree. {open_quotes}Only about seven [or] eight major suppliersmore » will survive,{close_quotes} says Robert Allsmiller, v.p./refinery and petrochemical catalysts at United Catalysts Inc. (UCI; Louisville, KY). {open_quotes}Who they [will be] is still up in the air.{close_quotes}« less

  1. Extreme selenium and tellurium contamination in soils--an eighty year-old industrial legacy surrounding a Ni refinery in the Swansea Valley.

    PubMed

    Perkins, William T

    2011-12-15

    Elevated levels of selenium (maximum 200 mg/kg) and tellurium (maximum 11 mg/kg) are reported in topsoils (<5 cm) from around a long-established nickel refinery at Clydach in the Lower Swansea Valley, UK. Se and Te are correlated with each other and when these data are plotted as contour diagrams they show a concentric pattern centred on the refinery site. The origin of the Se and Te contamination is investigated. A review of the changes in the refinery practices at the site is presented and used to link the soil contamination to industrial pollution which took place over 80 years ago. The most recent air quality data available cannot rule out some Se contamination up to 2003. Copyright © 2011 Elsevier B.V. All rights reserved.

  2. Twentieth-century decline of large-diameter trees in Yosemite National Park, California, USA

    USGS Publications Warehouse

    Lutz, J.A.; van Wagtendonk, J.W.; Franklin, J.F.

    2009-01-01

    Studies of forest change in western North America often focus on increased densities of small-diameter trees rather than on changes in the large tree component. Large trees generally have lower rates of mortality than small trees and are more resilient to climate change, but these assumptions have rarely been examined in long-term studies. We combined data from 655 historical (1932-1936) and 210 modern (1988-1999) vegetation plots to examine changes in density of large-diameter trees in Yosemite National Park (3027 km2). We tested the assumption of stability for large-diameter trees, as both individual species and communities of large-diameter trees. Between the 1930s and 1990s, large-diameter tree density in Yosemite declined 24%. Although the decrease was apparent in all forest types, declines were greatest in subalpine and upper montane forests (57.0% of park area), and least in lower montane forests (15.3% of park area). Large-diameter tree densities of 11 species declined while only 3 species increased. Four general patterns emerged: (1) Pinus albicaulis, Quercus chrysolepis, and Quercus kelloggii had increases in density of large-diameter trees occur throughout their ranges; (2) Pinus jeffreyi, Pinus lambertiana, and Pinus ponderosa, had disproportionately larger decreases in large-diameter tree densities in lower-elevation portions of their ranges; (3) Abies concolor and Pinus contorta, had approximately uniform decreases in large-diameter trees throughout their elevational ranges; and (4) Abies magnifica, Calocedrus decurrens, Juniperus occidentalis, Pinus monticola, Pseudotsuga menziesii, and Tsuga mertensiana displayed little or no change in large-diameter tree densities. In Pinus ponderosa-Calocedrus decurrens forests, modern large-diameter tree densities were equivalent whether or not plots had burned since 1936. However, in unburned plots, the large-diameter trees were predominantly A. concolor, C. decurrens, and Q. chrysolepis, whereas P. ponderosa dominated the large-diameter component of burned plots. Densities of large-diameter P. ponderosa were 8.1 trees ha-1 in plots that had experienced fire, but only 0.5 trees ha-1 in plots that remained unburned. ?? 2009 Elsevier B.V. All rights reserved.

  3. Robust optimization on sustainable biodiesel supply chain produced from waste cooking oil under price uncertainty.

    PubMed

    Zhang, Yong; Jiang, Yunjian

    2017-02-01

    Waste cooking oil (WCO)-for-biodiesel conversion is regarded as the "waste-to-wealthy" industry. This paper addresses the design of a WCO-for-biodiesel supply chain at both strategic and tactical levels. The supply chain of this problem is studied, which is based on a typical mode of the waste collection (from restaurants' kitchen) and conversion in the cities. The supply chain comprises three stakeholders: WCO supplier, integrated bio-refinery and demand zone. Three key problems should be addressed for the optimal design of the supply chain: (1) the number, sizes and locations of bio-refinery; (2) the sites and amount of WCO collected; (3) the transportation plans of WCO and biodiesel. A robust mixed integer linear model with muti-objective (economic, environmental and social objectives) is proposed for these problems. Finally, a large-scale practical case study is adopted based on Suzhou, a city in the east of China, to verify the proposed models. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. SATORI: a system for ontology-guided visual exploration of biomedical data repositories.

    PubMed

    Lekschas, Fritz; Gehlenborg, Nils

    2018-04-01

    The ever-increasing number of biomedical datasets provides tremendous opportunities for re-use but current data repositories provide limited means of exploration apart from text-based search. Ontological metadata annotations provide context by semantically relating datasets. Visualizing this rich network of relationships can improve the explorability of large data repositories and help researchers find datasets of interest. We developed SATORI-an integrative search and visual exploration interface for the exploration of biomedical data repositories. The design is informed by a requirements analysis through a series of semi-structured interviews. We evaluated the implementation of SATORI in a field study on a real-world data collection. SATORI enables researchers to seamlessly search, browse and semantically query data repositories via two visualizations that are highly interconnected with a powerful search interface. SATORI is an open-source web application, which is freely available at http://satori.refinery-platform.org and integrated into the Refinery Platform. nils@hms.harvard.edu. Supplementary data are available at Bioinformatics online.

  5. An integrated experiment for identification of best decision styles and teamworks with respect to HSE and ergonomics program: The case of a large oil refinery.

    PubMed

    Azadeh, A; Mokhtari, Z; Sharahi, Z Jiryaei; Zarrin, M

    2015-12-01

    Decision making failure is a predominant human error in emergency situations. To demonstrate the subject model, operators of an oil refinery were asked to answer a health, safety and environment HSE-decision styles (DS) questionnaire. In order to achieve this purpose, qualitative indicators in HSE and ergonomics domain have been collected. Decision styles, related to the questions, have been selected based on Driver taxonomy of human decision making approach. Teamwork efficiency has been assessed based on different decision style combinations. The efficiency has been ranked based on HSE performance. Results revealed that efficient decision styles resulted from data envelopment analysis (DEA) optimization model is consistent with the plant's dominant styles. Therefore, improvement in system performance could be achieved using the best operator for critical posts or in team arrangements. This is the first study that identifies the best decision styles with respect to HSE and ergonomics factors. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. [Liver enzyme abnormalities among oil refinery workers].

    PubMed

    Carvalho, Fernando Martins; Silvany Neto, Annibal Muniz; Mendes, João Luiz Barberino; Cotrim, Helma Pinchemel; Nascimento, Ana Lísia Cunha; Lima Júnior, Alberto Soares; Cunha, Tatiana Oliveira Bernardo da

    2006-02-01

    Occupational exposure typical of an oil refinery may alter liver function among the workers. Thus, the objective of the study was to identify risk factors for liver enzyme abnormalities among oil refinery workers. The workers at an oil refinery in Northeastern Brazil underwent routine annual medical examination from 1982 to 1998. This case-control study investigated all the 150 cases of individuals with simultaneous gamma-glutamyltransferase and alanine aminotransferase abnormalities of at least 10% above reference levels. As controls, 150 workers without any liver enzyme or bilirubin abnormalities since starting to work there were selected. Odds ratios and the respective 95% confidence intervals were calculated from logistic regression models. In all the production sectors, the risk of liver enzyme abnormalities was significantly higher than in the administrative sector (OR=5.7; 95% CI: 1.7-18.4), even when the effects of alcohol, obesity and medical history of hepatitis were controlled for. During the period from 1992 to 1994, 88 out of the 89 cases occurred among workers from the various production sectors. Occupational exposure plays an important role in causing liver enzyme abnormalities among oil refinery workers. This is in addition to the specifically biological and/or behavioral risk factors such as obesity and alcohol consumption.

  7. Carbon flow analysis and Carbon emission reduction of FCC in Chinese oil refineries

    NASA Astrophysics Data System (ADS)

    Jia, Fengrui; Wei, Na; Ma, Danzhu; Liu, Guangxin; Wu, Ming; Yue, Qiang

    2017-08-01

    The major problem of the energy production in oil refineries is the high emission of CO2 in China. The fluid catalytic cracking unit (FCC) is the key source of carbon emission in the oil refineries. According to the statistical data, the carbon emission of FCC unit accounts for more than 31% for the typical oil refineries. The carbon flow of FCC in the typical Chinese oil refineries were evaluated and analysed, which aimed at the solution of CO2 emission reduction. The method of substances flow analysis (SFA) and the mathematical programming were used to evaluate the carbon metabolism and optimize the carbon emission. The results indicated that the combustion emission of the reaction-regeneration subsystem (RRS) was the major source of FCC. The quantity of CO2 emission of RSS was more than 90%. The combustion efficiency and the amount of residual oil affected the carbon emission of RRS most according to the optimized analysis of carbon emission reduction. Moreover, the fractionation subsystem (TFS) had the highest environmental efficiency and the absorption-stabilization subsystem (ASS) had the highest resource efficiency (approximately to 1) of carbon.

  8. Tesoro Los Angeles Refinery Integration and Compliance Project

    EPA Pesticide Factsheets

    EPA Region 9 has two announcements pertaining to the Los Angeles Refinery Integration and Compliance project (LARIC project): permit revisions meet all CAA requirements and federal PSD permitting provisions do not apply to this project.

  9. 76 FR 39899 - Notice of Lodging of Consent Decree Under the Clean Air Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... emissions of nitrogen oxides, sulfur dioxide, volatile organic compounds, and benzene. Among other things... refinery's benzene monitoring program is enhanced, and the refinery's leak-detection-and-repair (LDAR...

  10. Renewable Fuel Solutions for Petroleum Refineries

    DOT National Transportation Integrated Search

    1995-03-01

    This National Renewable Energy Laboratory (NREL) factsheet, one in a series, : BioFacts: Fueling a Stronger Economy, explains how biomass research is helping : to produce new ways to condition synthesis gas (syngas) produced from refinery : byproduct...

  11. Development of a plume-in-grid model for industrial point and volume sources: application to power plant and refinery sources in the Paris region

    NASA Astrophysics Data System (ADS)

    Kim, Y.; Seigneur, C.; Duclaux, O.

    2014-04-01

    Plume-in-grid (PinG) models incorporating a host Eulerian model and a subgrid-scale model (usually a Gaussian plume or puff model) have been used for the simulations of stack emissions (e.g., fossil fuel-fired power plants and cement plants) for gaseous and particulate species such as nitrogen oxides (NOx), sulfur dioxide (SO2), particulate matter (PM) and mercury (Hg). Here, we describe the extension of a PinG model to study the impact of an oil refinery where volatile organic compound (VOC) emissions can be important. The model is based on a reactive PinG model for ozone (O3), which incorporates a three-dimensional (3-D) Eulerian model and a Gaussian puff model. The model is extended to treat PM, with treatments of aerosol chemistry, particle size distribution, and the formation of secondary aerosols, which are consistent in both the 3-D Eulerian host model and the Gaussian puff model. Furthermore, the PinG model is extended to include the treatment of volume sources to simulate fugitive VOC emissions. The new PinG model is evaluated over Greater Paris during July 2009. Model performance is satisfactory for O3, PM2.5 and most PM2.5 components. Two industrial sources, a coal-fired power plant and an oil refinery, are simulated with the PinG model. The characteristics of the sources (stack height and diameter, exhaust temperature and velocity) govern the surface concentrations of primary pollutants (NOx, SO2 and VOC). O3 concentrations are impacted differently near the power plant than near the refinery, because of the presence of VOC emissions at the latter. The formation of sulfate is influenced by both the dispersion of SO2 and the oxidant concentration; however, the former tends to dominate in the simulations presented here. The impact of PinG modeling on the formation of secondary organic aerosol (SOA) is small and results mostly from the effect of different oxidant concentrations on biogenic SOA formation. The investigation of the criteria for injecting plumes into the host model (fixed travel time and/or puff size) shows that a size-based criterion is recommended to treat the formation of secondary aerosols (sulfate, nitrate, and ammonium), in particular, farther downwind of the sources (beyond about 15 km). The impacts of PinG modeling are less significant in a simulation with a coarse grid size (10 km) than with a fine grid size (2 km), because the concentrations of the species emitted from the PinG sources are relatively less important compared to background concentrations when injected into the host model with a coarser grid size.

  12. Development of a plume-in-grid model for industrial point and volume sources: application to power plant and refinery sources in the Paris region

    NASA Astrophysics Data System (ADS)

    Kim, Y.; Seigneur, C.; Duclaux, O.

    2013-11-01

    Plume-in-grid (PinG) models incorporating a host Eulerian model and a subgrid-scale model (usually a Gaussian plume or puff model) have been used for the simulations of stack emissions (e.g., fossil fuel-fired power plants and cement plants) for gaseous and particulate species such as nitrogen oxides (NOx), sulfur dioxide (SO2), particulate matter (PM) and mercury (Hg). Here, we describe the extension of a PinG model to study the impact of an oil refinery where volatile organic compound (VOC) emissions can be important. The model is based on a reactive PinG model for ozone (O3), which incorporates a three-dimensional (3-D) Eulerian model and a Gaussian puff model. The model is extended to treat PM, with treatments of aerosol chemistry, particle size distribution, and the formation of secondary aerosols, which are consistent in both the 3-D Eulerian host model and the Gaussian puff model. Furthermore, the PinG model is extended to include the treatment of volume sources to simulate fugitive VOC emissions. The new PinG model is evaluated over Greater Paris during July 2009. Model performance is satisfactory for O3, PM2.5 and most PM2.5 components. Two industrial sources, a coal-fired power plant and an oil refinery, are simulated with the PinG model. The characteristics of the sources (stack height and diameter, exhaust temperature and velocity) govern the surface concentrations of primary pollutants (NOx, SO2 and VOC). O3 concentrations are impacted differently near the power plant than near the refinery, because of the presence of VOC emissions at the latter. The formation of sulfate is influenced by both the dispersion of SO2 and the oxidant concentration; however, the former tends to dominate in the simulations presented here. The impact of PinG modeling on the formation of secondary organic aerosols (SOA) is small and results mostly from the effect of different oxidant concentrations on biogenic SOA formation. The investigation of the criteria for injecting plumes into the host model (fixed travel time and/or puff size) shows that a size-based criterion is recommended to treat the formation of secondary aerosols (sulfate, nitrate, and ammonium), in particular, farther downwind of the sources (from about 15 km). The impacts of the PinG modeling are less significant in a simulation with a coarse grid size (10 km) than with a fine grid size (2 km), because the concentrations of the species emitted from the PinG sources are relatively less important compared to background concentrations when injected into the host model.

  13. Measuring, managing and maximizing refinery performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bascur, O.A.; Kennedy, J.P.

    1996-01-01

    Implementing continuous quality improvement is a confluence of total quality management, people empowerment, performance indicators and information engineering. Supporting information technologies allow a refiner to narrow the gap between management objectives and the process control level. Dynamic performance monitoring benefits come from production cost savings, improved communications and enhanced decision making. A refinery workgroup information flow model helps automate continuous improvement of processes, performance and the organization. The paper discusses the rethinking of refinery operations, dynamic performance monitoring, continuous process improvement, the knowledge coordinator and repository manager, an integrated plant operations workflow, and successful implementation.

  14. Offshore Installations and Their Relevance to the Coast Guard through the Next Twenty-Five Years. Volume III. Appendices.

    DTIC Science & Technology

    1980-11-01

    facility common to all facilities as well as a separate municipal waste treatment plant . The crude refinery and petrochemicals plant produces high...offshore: refinery L M H I power plant I L L M I industrial complex I L L L I II Extensive use of sub-sea production systems I M H I up to 5,000 ft. I... petrochemicals factory or a refinery acting as the core around which an in- dustrial complex is built. The type of core industry selected would depend

  15. Characteristics of volatile organic compounds (VOCs) emitted from a petroleum refinery in Beijing, China

    NASA Astrophysics Data System (ADS)

    Wei, Wei; Cheng, Shuiyuan; Li, Guohao; Wang, Gang; Wang, Haiyan

    2014-06-01

    This study made a field VOCs (volatile organic compounds) measurement for a petroleum refinery in Beijing by determining 56 PAMS VOCs, which are demanded for photochemical assessment in US, and obtained the characteristics of VOCs emitted from the whole refinery and from its inner main devices. During the monitoring period, this refinery brought about an average increase of 61 ppbv in the ambient TVOCs (sum of the PAMS VOCs) at the refinery surrounding area, while the background of TVOCs there was only 10-30 ppbv. In chemical profile, the VOCs emitted from the whole refinery was characteristic by isobutane (8.7%), n-butane (7.9%), isopentane (6.3%), n-pentane (4.9%%), n-hexane (7.6%), C6 branched alkanes (6.0%), propene (12.7%), 1-butene (4.1%), benzene (7.8%), and toluene (5.9%). On the other hand, the measurement for the inner 5 devices, catalytic cracking units (CCU2 and CCU3), catalytic reforming unit (CRU), tank farm (TF), and wastewater treatment(WT), revealed the higher level of VOCs pollutions (about several hundred ppbv of TVOCs), and the individual differences in VOCs chemical profiles. Based on the measured speciated VOCs data at the surrounding downwind area, PMF receptor model was applied to identify the VOCs sources in the refinery. Then, coupling with the VOCs chemical profiles measured at the device areas, we concluded that CCU1/3 contributes to 25.9% of the TVOCs at the surrounding downwind area by volume, followed by CCU2 (24.7%), CRU (18.9%), TF (18.3%) and WT (12.0%), which was accordant with the research of US EPA (2008). Finally, ozone formation potentials of the 5 devices were also calculated by MIR technique, which showed that catalytic cracking units, accounting for about 55.6% to photochemical ozone formation, should be given the consideration of VOCs control firstly.

  16. Energy: Selected Facts and Numbers

    DTIC Science & Technology

    2008-08-08

    air quality by reducing emissions led utilities to convert a number of coal-fired powerplants to burn oil, and many new plants were designed to burn...years were recently submitted, but no new plants are currently under construction or on order. Construction of major hydroelectric projects has also...5.1 and 5.13a-d. Percentages calculated by CRS. Industrial consumption of petroleum, which includes such large consumers as refineries and

  17. 40 CFR 63.1560 - What is the purpose of this subpart?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Standards for Hazardous Air Pollutants for Petroleum Refineries: Catalytic Cracking Units, Catalytic... from petroleum refineries. This subpart also establishes requirements to demonstrate initial and continuous compliance with the emission limitations and work practice standards. ...

  18. Petroleum Refineries New Source Performance Standards (NSPS) Direct Final Amendments Fact Sheet

    EPA Pesticide Factsheets

    This page contains a December 2013 fact sheet with information regarding the direct final rule for the NSPS for Petroleum Refineries. This document provides a summary of the information for this NSPS.

  19. World Energy Projection System Plus Model Documentation: Refinery Module

    EIA Publications

    2016-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Refinery Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  20. Removal of hydrocarbon from refinery tank bottom sludge employing microbial culture.

    PubMed

    Saikia, Rashmi Rekha; Deka, Suresh

    2013-12-01

    Accumulation of oily sludge is becoming a serious environmental threat, and there has not been much work reported for the removal of hydrocarbon from refinery tank bottom sludge. Effort has been made in this study to investigate the removal of hydrocarbon from refinery sludge by isolated biosurfactant-producing Pseudomonas aeruginosa RS29 strain and explore the biosurfactant for its composition and stability. Laboratory investigation was carried out with this strain to observe its efficacy of removing hydrocarbon from refinery sludge employing whole bacterial culture and culture supernatant to various concentrations of sand-sludge mixture. Removal of hydrocarbon was recorded after 20 days. Analysis of the produced biosurfactant was carried out to get the idea about its stability and composition. The strain could remove up to 85 ± 3 and 55 ± 4.5 % of hydrocarbon from refinery sludge when whole bacterial culture and culture supernatant were used, respectively. Maximum surface tension reduction (26.3 mN m(-1)) was achieved with the strain in just 24 h of time. Emulsification index (E24) was recorded as 100 and 80 % with crude oil and n-hexadecane, respectively. The biosurfactant was confirmed as rhamnolipid containing C8 and C10 fatty acid components and having more mono-rhamnolipid congeners than the di-rhamnolipid ones. The biosurfactant was stable up to 121 °C, pH 2-10, and up to a salinity value of 2-10 % w/v. To our knowledge, this is the first report showing the potentiality of a native strain from the northeast region of India for the efficient removal of hydrocarbon from refinery sludge.

  1. Use of plants to monitor contamination of air by SO2 in and around refinery.

    PubMed

    Abdul-Wahab, Sabah A; Yaghi, Basma

    2004-01-01

    The generation of SO2 from a refinery may affect the surrounding environment. Moreover, SO2 and its by-products are phytotoxic as berg. This study aims to investigate plant responses to SO2. The work has been designed with emphasis on using the plants directly in monitoring the contamination of the atmospheric air by SO2. An assessment was made of the impacts of long-term SO2 emissions from an oil refinery on plants located in nearby areas that are likely to be exposed to emission fallout. Three different plant species (Prosopis cineraria. Azadirachta indica, and Phoenix dactilifera) common to the environment of the Arabian Gulf were selected at different distances and directions from the refinery. The analysis of the sulphate contents of these plants were used as bioindicators for monitoring SO2 concentration levels in and around the refinery. The results of this study showed that the three different plant species responsed differently to SO2 in terms of their sulphate contents. Generally, all three species were found to be sensitive to SO2 exposure. Furthermore, the concentration of sulphate was found to be much higher closer to the refinery. On the basis of this study, it can be stated that even though SO2 levels were lower than the permissible limit values, the sulphate contents accumulated in the plants were likely to cause plant injury especially in the vicinity of the source. This suggests that the present environmental guidelines for SO2 may not protect sensitive plant species.

  2. Feasibility of flare gas reformation to practical energy in Farashband gas refinery: no gas flaring.

    PubMed

    Rahimpour, Mohammad Reaza; Jokar, Seyyed Mohammad

    2012-03-30

    A suggested method for controlling the level of hazardous materials in the atmosphere is prevention of combustion in flare. In this work, three methods are proposed to recover flare gas instead of conventional gas-burning in flare at the Farashband gas refinery. These methods aim to minimize environmental and economical disadvantages of burning flare gas. The proposed methods are: (1) gas to liquid (GTL) production, (2) electricity generation with a gas turbine and, (3) compression and injection into the refinery pipelines. To find the most suitable method, the refinery units that send gas to the flare as well as the required equipment for the three aforementioned methods are simulated. These simulations determine the amount of flare gas, the number of GTL barrels, the power generated by the gas turbine and the required compression horsepower. The results of simulation show that 563 barrels/day of valuable GTL products is produced by the first method. The second method provides 25 MW electricity and the third method provides a compressed natural gas with 129 bar pressure for injection to the refinery pipelines. In addition, the economics of flare gas recovery methods are studied and compared. The results show that for the 4.176MMSCFD of gas flared from the Farashband gas refinery, the electricity production gives the highest rate of return (ROR), the lowest payback period, the highest annual profit and mild capital investment. Therefore, the electricity production is the superior method economically. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Report: EPA Needs to Improve Tracking of National Petroleum Refinery Compliance Program Progress and Impacts

    EPA Pesticide Factsheets

    Report #2004-P-00021, June 22, 2004. EPA and the U.S. Department of Justice have developed and implemented an integrated refinery compliance strategy that addresses the most important noncompliance problems.

  4. Nickel refinery dust

    Integrated Risk Information System (IRIS)

    Nickel refinery dust ; no CASRN Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Effect

  5. Shell Martinez Refinery, Martinez, CA: Consent Agreement and Final Order

    EPA Pesticide Factsheets

    Final executed Consent Agreement and Final Order (CA/FO) negotiated between EPA Region 9, and Shell Oil Products US relating to violations discovered during routine compliance evaluation inspections at the Shell Martinez Refinery in Martinez, California.

  6. NPDES Permit for Chemtrade Refinery Services in Wyoming

    EPA Pesticide Factsheets

    Under NPDES permit WY-0034207, Chemtrade Refinery Services, Inc. is authorized to discharge from its wastewater treatment facility located in Fremont County,Wyoming, to an unnamed drainage way that flows into the Little Wind River near St. Stephens, Wyo.

  7. Information to be Submitted with 2016 Renewable Fuel Standard (RFS) Small Refinery Hardship Exemption Requests

    EPA Pesticide Factsheets

    This December 6, 2016 letter from EPA provides information about the petition submission process for small refineries seeking exemptions from their 2016 RFS obligations, including financial and other information necessary for evaluation.

  8. 76 FR 72675 - Grant of Authority for Subzone Status, Valero Refining Company-California, (Oil Refinery...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-25

    ... by-products (examiner's report, Appendix ``C''); --products for export; --and, products eligible for...: 1. Foreign status (19 CFR 146.41, 146.42) products consumed as fuel for the refinery shall be...

  9. Zn isotope study of atmospheric emissions and dry depositions within a 5 km radius of a Pb-Zn refinery

    NASA Astrophysics Data System (ADS)

    Mattielli, Nadine; Petit, Jérôme C. J.; Deboudt, Karine; Flament, Pascal; Perdrix, Esperanza; Taillez, Aurélien; Rimetz-Planchon, Juliette; Weis, Dominique

    The present paper examines the use of zinc isotopes as tracers of atmospheric sources and focuses on the potential fractionation of Zn isotopes through anthropogenic processes. In order to do so, Zn isotopic ratios are measured in enriched ores and airborne particles associated with pyrometallurgical activities of one of the major Pb-Zn refineries in France. Supporting the isotopic investigation, this paper also compares morphological and chemical characteristics of Zn particles collected on dry deposition plates ("environmental samples") placed within a 5 km radius of the smelter, with those of Zn particles collected inside the plant ("process samples"), i.e. dust collected from the main exhaust system of the plant. To ensure a constant isotopic "supply", the refinery processed a specific set of ores during the sampling campaigns, as agreed with the executive staff of the plant. Enriched ores and dust produced by the successive Zn extraction steps show strong isotope fractionation (from -0.66 to +0.22‰) mainly related to evaporation processes within the blast furnaces. Dust from the main chimney displays a δ 66Zn value of -0.67‰. Application of the Rayleigh equation to evaluate the fractionation factor associated with the Zn vapor produced after a free evaporation gives a range of αore/vapor from 1.0004 to 1.0008. The dry deposits, collected on plates downwind of the refinery, display δ 66Zn variations of up to +0.7‰. However, it is to be noted that between 190 and 1250 m from the main chimney of the refinery, the dry deposits show a high level of large (>10 μm) Zn, S, Fe and O bearing aggregates characterized by positive δ 66Zn values (+0.02 to +0.19‰). These airborne particles probably derive from the re-suspension of slag heaps and local emissions from the working-units. In contrast, from 1720 to 4560 m, the dry deposits are comprised of small (PM10) particles, including spherical Zn-bearing aggregates, showing negative δ 66Zn values (-0.52 to -0.02‰). Our results suggest that the source of the distal dry fallouts is the main chimney plume, whose light Zn isotopic signature they preserve. Based on Zn isotopic analysis in combination with morphological and chemical characteristics of airborne particles, the present study suggests the traceability of smelter dusts by Zn isotopes.

  10. Aspen Modeling of the Bayer Process

    NASA Astrophysics Data System (ADS)

    Langa, J. M.; Russell, T. G.; O'Neill, G. A.; Gacka, P.; Shah, V. B.; Stephenson, J. L.; Snyder, J. G.

    The ASPEN simulator was used to model Alcoa's Pt. Comfort Bayer refinery. All areas of the refinery including the lakes and powerhouse were modeled. Each area model was designed to be run stand alone or integrated with others for a full plant model.

  11. Synthetic Minor NSR Permit: Chemtrade Refinery Services, Inc. Riverton, Wyoming Facility

    EPA Pesticide Factsheets

    This page contains the response to public comments and final synthetic minor NSR permit for the Chemtrade Refinery Services, Inc. Riverton, Wyoming Facility, operated by Chemtrade Logistics and located on the Wind River Indian Reservation in Fremont County

  12. Alternative Fuels Data Center: Vermont Transportation Data for Alternative

    Science.gov Websites

    Plants 5 Generating Capacity (nameplate, MW) 675 Oil Refineries 0 Oil Refinery Capacity (bbl/day) 0 Recycled Cooking Oil Powers Biodiesel Vehicles in Vermont Recycled Cooking Oil Powers Biodiesel Vehicles in

  13. Rapid Response R&D for the Propulsion Directorate. Delivery Order 0019: Advanced Alternative Energy Technologies, Subtask: Life Cycle Greenhouse Gas Analysis of Advanced Jet Propulsion Fuels: Fischer-Tropsch Based SPK-1 Case Study

    DTIC Science & Technology

    2011-09-01

    carry finished jet fuel from the CBTL facility. The pipeline connects the CBTL facility to a petroleum refinery located in Wood River, Illinois...Under Option 1, all the blended jet fuel is transported via pipeline from the refinery in Wood River to Chicago’s O’Hare airport. Under Option 2...shipping F-T jet fuel to a refinery in Wood River, Illinois (near St. Louis, Missouri) for blending and final transport of the blended jet fuel to

  14. Minimising reversion, using seawater and magnesium chloride, caused by the dissolution of tricalcium aluminate hexahydrate.

    PubMed

    Palmer, Sara J; Frost, Ray L; Smith, Matthew K

    2011-01-15

    The increase in pH and aluminium concentration after the neutralisation of bauxite refinery residues is commonly known as reversion. This investigation reports the extent of reversion in synthetic supernatant liquor and possible methods to reduce reversion. This work is based on bauxite refinery residues produced from alumina refineries, where reversion is a real life situation in neutralised refinery residues. Tricalcium aluminate hexahydrate, a common phase in bauxite refinery residues, has been found to cause reversion. It has been established that reductions in both pH and aluminium from the seawater neutralisation process are due to the formation of 'Bayer' hydrotalcite Mg(7)Al(2)(OH)(18)(CO(3)(2-),SO(4)(2-))·xH(2)O. This is the primary mechanism involved in the removal of aluminium from solution. Increasing the volume of seawater used for the neutralisation process minimises the extent of reversion for both synthetic supernatant liquor and red mud slurry. The addition of MgCl(2)·6H(2)O also showed a reduction in reversion and confirmed that the decrease in aluminium and hydroxyl ions is due to the formation of Bayer hydrotalcite and not simply a dilution effect. Copyright © 2010 Elsevier Inc. All rights reserved.

  15. Monitoring coastal pollution associated with the largest oil refinery complex of Venezuela

    PubMed Central

    Bone, David; Bastidas, Carolina; Ramos, Ruth

    2016-01-01

    This study evaluated pollution levels in water and sediments of Península de Paraguaná and related these levels with benthic macrofauna along a coastal area where the largest Venezuelan oil refineries have operated over the past 60 years. For this, the concentration of heavy metals, of hydrocarbon compounds and the community structure of the macrobenthos were examined at 20 sites distributed along 40 km of coastline for six consecutive years, which included windy and calm seasons. The spatial variability of organic and inorganic compounds showed considerably high coastal pollution along the study area, across both years and seasons. The southern sites, closest to the refineries, had consistently higher concentrations of heavy metals and organic compounds in water and sediments when compared to those in the north. The benthic community was dominated by polychaetes at all sites, seasons and years, and their abundance and distribution were significantly correlated with physical and chemical characteristics of the sediments. Sites close to the oil refineries were consistently dominated by families known to tolerate xenobiotics, such as Capitellidae and Spionidae. The results from this study highlight the importance of continuing long-term environmental monitoring programs to assess the impact of effluent discharge and spill events from the oil refineries that operate in the western coast of Paraguaná, Venezuela. PMID:27375970

  16. Monitoring coastal pollution associated with the largest oil refinery complex of Venezuela.

    PubMed

    Croquer, Aldo; Bone, David; Bastidas, Carolina; Ramos, Ruth; García, Elia

    2016-01-01

    This study evaluated pollution levels in water and sediments of Península de Paraguaná and related these levels with benthic macrofauna along a coastal area where the largest Venezuelan oil refineries have operated over the past 60 years. For this, the concentration of heavy metals, of hydrocarbon compounds and the community structure of the macrobenthos were examined at 20 sites distributed along 40 km of coastline for six consecutive years, which included windy and calm seasons. The spatial variability of organic and inorganic compounds showed considerably high coastal pollution along the study area, across both years and seasons. The southern sites, closest to the refineries, had consistently higher concentrations of heavy metals and organic compounds in water and sediments when compared to those in the north. The benthic community was dominated by polychaetes at all sites, seasons and years, and their abundance and distribution were significantly correlated with physical and chemical characteristics of the sediments. Sites close to the oil refineries were consistently dominated by families known to tolerate xenobiotics, such as Capitellidae and Spionidae. The results from this study highlight the importance of continuing long-term environmental monitoring programs to assess the impact of effluent discharge and spill events from the oil refineries that operate in the western coast of Paraguaná, Venezuela.

  17. 76 FR 9608 - Certain Welded Large Diameter Line Pipe From Mexico

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-18

    ... Large Diameter Line Pipe From Mexico AGENCY: United States International Trade Commission. ACTION... duty order on certain welded large diameter line pipe from Mexico. For further information concerning... welded large diameter line pipe from Mexico would not be likely to lead to continuation or recurrence of...

  18. 40 CFR 419.37 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ammonia set forth in § 419.36 (a) and (b). (b) The following standard is applied to the cooling tower... refinery flow to the POTW; and (3) by the ratio of the cooling tower discharge flow to the total refinery...

  19. NPDES Permit for Thunder Butte Petroleum Services Inc. Refinery in North Dakota

    EPA Pesticide Factsheets

    Under NPDES permit ND-003098, the Thunder Butte Petroleum Services Inc. refinery is authorized to discharge from its wastewater treatment facilities near Makoti in Ward County, North Dakota, to wetlands tributary to the East Fork of Shell Creek.

  20. Petroleum Refineries (Catalytic Cracking, Catalytic Reforming and Sulfur Recovery Units): National Emission Standards for Hazardous Air Pollutants (NESHAP)

    EPA Pesticide Factsheets

    learn more about the NESHAP for catalytic cracking and reforming units, as well as sulfur recovery units in petroleum refineries by reading the rule history, rule summary, background information documents, and compliance information

  1. 40 CFR 80.141 - Interim detergent gasoline program.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) “Carburetor Cleanliness Test Procedure, State-of-the-Art Summary, Report: 1973-1981”, Coordinating Research... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold... who manufacture, supply, or transfer detergent additives or detergent-additized post-refinery...

  2. Energy: Selected Facts and Numbers

    DTIC Science & Technology

    2006-11-29

    emissions led utilities to convert a number of coal-fired powerplants to burn oil, and many new plants were designed to burn oil or natural gas. Utilities...Tables 5.13a-d. Industrial consumption of petroleum, which includes such large consumers as refineries and petrochemical industries, has remained about...1960s because it resulted in lower emissions of air pollutants, and consumption continued in the 1970s despite the price surge because natural gas was

  3. Test plan, the Czechowice Oil Refinery bioremediation demonstration of a process waste lagoon. Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Altman, D.J.; Hazen, T.C.; Tien, A.J.

    1997-05-10

    The overall objective of the bioremediation project is to provide a cost effective bioremediation demonstration of petroleum contaminated soil at the Czechowice Oil Refinery. Additional objectives include training of personnel, and transfer of this technology by example to Poland, and the Risk Abatement Center for Central and Eastern Europe (RACE). The goal of the remediation is to reduce the risk of PAH compounds in soil and provide a green zone (grassy area) adjacent to the site boundary. Initial project discussions with the Czechowice Oil Refinery resulted in helping the refinery find an immediate cost effective solution for the dense organicmore » sludge in the lagoons. They found that when mixed with other waste materials, the sludge could be sold as a fuel source to local cement kilns. Thus the waste was incinerated and provided a revenue stream for the refinery to cleanup the lagoon. This allowed the bioremediation project to focus on remediation of contaminated soil that unusable as fuel, less recalcitrant and easier to handle and remediate. The assessment identified 19 compounds at the refinery that represented significant risk and would require remediation. These compounds consisted of metals, PAH`s, and BTEX. The contaminated soil to be remediated in the bioremediation demonstration contains only PAH (BTEX and metals are not significantly above background concentrations). The final biopile design consists of (1) dewatering and clearing lagoon A to clean clay, (2) adding a 20 cm layer of dolomite with pipes for drainage, leachate collection, air injection, and pH adjustment, (3) adding a 1.1 m layer of contaminated soil mixed with wood chips to improve permeability, and (4) completing the surface with 20 cm of top soil planted with grass.« less

  4. Estimating Impacts of Diesel Fuel Reformulation with Vector-based Blending

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hadder, G.R.

    2003-01-23

    The Oak Ridge National Laboratory Refinery Yield Model has been used to study the refining cost, investment, and operating impacts of specifications for reformulated diesel fuel (RFD) produced in refineries of the U.S. Midwest in summer of year 2010. The study evaluates different diesel fuel reformulation investment pathways. The study also determines whether there are refinery economic benefits for producing an emissions reduction RFD (with flexibility for individual property values) compared to a vehicle performance RFD (with inflexible recipe values for individual properties). Results show that refining costs are lower with early notice of requirements for RFD. While advanced desulfurizationmore » technologies (with low hydrogen consumption and little effect on cetane quality and aromatics content) reduce the cost of ultra low sulfur diesel fuel, these technologies contribute to the increased costs of a delayed notice investment pathway compared to an early notice investment pathway for diesel fuel reformulation. With challenging RFD specifications, there is little refining benefit from producing emissions reduction RFD compared to vehicle performance RFD. As specifications become tighter, processing becomes more difficult, blendstock choices become more limited, and refinery benefits vanish for emissions reduction relative to vehicle performance specifications. Conversely, the emissions reduction specifications show increasing refinery benefits over vehicle performance specifications as specifications are relaxed, and alternative processing routes and blendstocks become available. In sensitivity cases, the refinery model is also used to examine the impact of RFD specifications on the economics of using Canadian synthetic crude oil. There is a sizeable increase in synthetic crude demand as ultra low sulfur diesel fuel displaces low sulfur diesel fuel, but this demand increase would be reversed by requirements for diesel fuel reformulation.« less

  5. Treatment of petroleum refinery wastewater containing heavily polluting substances in an aerobic submerged fixed-bed reactor.

    PubMed

    Vendramel, S; Bassin, J P; Dezotti, M; Sant'Anna, G L

    2015-01-01

    Petroleum refineries produce large amount of wastewaters, which often contain a wide range of different compounds. Some of these constituents may be recalcitrant and therefore difficult to be treated biologically. This study evaluated the capability of an aerobic submerged fixed-bed reactor (ASFBR) containing a corrugated PVC support material for biofilm attachment to treat a complex and high-strength organic wastewater coming from a petroleum refinery. The reactor operation was divided into five experimental runs which lasted more than 250 days. During the reactor operation, the applied volumetric organic load was varied within the range of 0.5-2.4 kgCOD.m(-3).d(-1). Despite the inherent fluctuations on the characteristics of the complex wastewater and the slight decrease in the reactor performance when the influent organic load was increased, the ASFBR showed good stability and allowed to reach chemical oxygen demand, dissolved organic carbon and total suspended solids removals up to 91%, 90% and 92%, respectively. Appreciable ammonium removal was obtained (around 90%). Some challenging aspects of reactor operation such as biofilm quantification and important biofilm constituents (e.g. polysaccharides (PS) and proteins (PT)) were also addressed in this work. Average PS/volatile attached solids (VAS) and PT/VAS ratios were around 6% and 50%, respectively. The support material promoted biofilm attachment without appreciable loss of solids and allowed long-term operation without clogging. Microscopic observations of the microbial community revealed great diversity of higher organisms, such as protozoa and rotifers, suggesting that toxic compounds found in the wastewater were possibly removed in the biofilm.

  6. Monitoring of Emissions From a Refinery Tank Farm Using a Combination of Optical Remote Sensing Techniques

    NASA Astrophysics Data System (ADS)

    Polidori, A.; Tisopulos, L.; Pikelnaya, O.; Mellqvist, J.; Samuelsson, J.; Marianne, E.; Robinson, R. A.; Innocenti, F.; Finlayson, A.; Hashmonay, R.

    2016-12-01

    Despite great advances in reducing air pollution, the South Coast Air Basin (SCAB) still faces challenges to attain federal health standards for air quality. Refineries are large sources of ozone precursors and, hence contribute to the air quality problems of the region. Additionally, petrochemical facilities are also sources of other hazardous air pollutants (HAP) that adversely affect human health, for example aromatic hydrocarbons. In order to assure safe operation, decrease air pollution and minimize population exposure to HAP the South Coast Air Quality Management District (SCAQMD) has a number of regulations for petrochemical facilities. However, significant uncertainties still exist in emission estimates and traditional monitoring techniques often do not allow for real-time emission monitoring. In the fall of 2015 the SCAQMD, Fluxsense Inc., the National Physical Laboratory (NPL), and Atmosfir Optics Ltd. conducted a measurement study to characterize and quantify gaseous emissions from the tank farm of one of the largest oil refineries in the SCAB. Fluxsense used a vehicle equipped with Solar Occultation Flux (SOF), Differential Optical Absorption Spectroscopy (DOAS), and Extractive Fourier Transform Infrared (FTIR) spectroscopy instruments. Concurrently, NPL operated their Differential Absorption Lidar (DIAL) system. Both research groups quantified emissions from the entire tank farm and identified fugitive emission sources within the farm. At the same time, Atmosfir operated an Open Path FTIR (OP-FTIR) spectrometer along the fenceline of the tank farm. During this presentation we will discuss the results of the emission measurements from the tank farm of the petrochemical facility. Emission rates resulting from measurements by different ORS methods will be compared and discussed in detail.

  7. Bioremediation of trace organic compounds found in precious metals refineries' wastewaters: a review of potential options.

    PubMed

    Barbosa, V L; Tandlich, R; Burgess, J E

    2007-07-01

    Platinum group metal (PGM) refining processes produce large quantities of wastewater, which is contaminated with the compounds that make up the solvents/extractants mixtures used in the process. These compounds often include solvesso, beta-hydroxyxime, amines, amides and methyl isobutyl ketone. A process to clean up PGM refinery wastewaters so that they could be re-used in the refining process would greatly contribute to continual water storage problems and to cost reduction for the industry. Based on the concept that organic compounds that are produced biologically can be destroyed biologically, the use of biological processes for the treatment of organic compounds in other types of waste stream has been favoured in recent years, owing to their low cost and environmental acceptability. This review examines the available biotechnologies and their effectiveness for treating compounds likely to be contained in precious metal extraction process wastewaters. The processes examined include: biofilters, fluidized bed reactors, trickle-bed bioreactors, bioscrubbers, two-phase partitioning bioreactors, membrane bioreactors and activated sludge. Although all processes examined showed adequate to excellent removal of organic compounds from various gaseous and fewer liquid waste streams, there was a variation in their effectiveness. Variations in performance of laboratory-scale biological processes are probably due to the inherent change in the microbial population composition due to selection pressure, environmental conditions and the time allowed for adaptation to the organic compounds. However, if these factors are disregarded, it can be established that activated sludge and membrane bioreactors are the most promising processes for use in the treatment of PGM refinery wastewaters.

  8. Bio-Refineries Bioprocess Technologies for Waste-Water Treatment, Energy and Product Valorization

    NASA Astrophysics Data System (ADS)

    Keith Cowan, A.

    2010-04-01

    Increasing pressure is being exerted on communities and nations to source energy from forms other than fossil fuels. Also, potable water is becoming a scarce resource in many parts of the world, and there remains a large divide in the demand and utilization of plant products derived from genetically modified organisms (GMOs) and non-GMOs. The most extensive user and manager of terrestrial ecosystems is agriculture which is also the de facto steward of natural resources. As stated by Miller (2008) no other industry or institution comes close to the comparative advantage held for this vital responsibility while simultaneously providing food, fiber, and other biology-based products, including energy. Since modern commercial agriculture is transitioning from the production of bulk commodities to the provision of standardized products and specific-attribute raw materials for differentiated markets, we can argue that processes such as mass cultivation of microalgae and the concept of bio-refineries be seen as part of a `new' agronomy. EBRU is currently exploring the integration of bioprocess technologies using microalgae as biocatalysts to achieve waste-water treatment, water polishing and endocrine disruptor (EDC) removal, sustainable energy production, and exploitation of the resultant biomass in agriculture as foliar fertilizer and seed coatings, and for commercial extraction of bulk commodities such as bio-oils and lecithin. This presentation will address efforts to establish a fully operational solar-driven microalgae bio-refinery for use not only in waste remediation but to transform waste and biomass to energy, fuels, and other useful materials (valorisation), with particular focus on environmental quality and sustainability goals.

  9. Around Marshall

    NASA Image and Video Library

    1963-09-09

    NASA's Michoud Assembly Facility, located in eastern New Orleans, Louisiana, is an 832 acre site that is a government-owned, contractor-operated component of the George C. Marshall Space Flight Center (MSFC). The facility was acquired by NASA in 1961 at the recommendation of Dr. Wernher von Braun and his rocket team in Huntsville Alabama. The cavernous plant served as the assembly facility for the Saturn launch vehicles and most recently the external tank (ET) used for the Space Shuttle Program. The facility features one of the world's biggest manufacturing plants with 43 acres under one roof and a port with deep-water access for the transportation of large space structures. When completed, space hardware is towed on a barge across the Gulf of Mexico, around Florida and up to Kennedy Space Center. The original tract of land was part of a 34,500 acre French Royal land grant to local merchant, Gilbert Antoine de St. Maxent in 1763. Later, the land was acquired by French transplant Antoine Michoud, the son of Napoleon's Administrator of Domains, who moved to the city in 1827. Michoud operated a sugar cane plantation and refinery on the site until his death in 1863. His heirs continued operating the refinery and kept the original St. Maxent estate intact into the 20th century. Two brick smokestacks from the original refinery still stand before the Michoud facility today as seen in the lower half of this photograph taken in the 1960's, while the upper half reflects the area during the time of the sugar cane plantation workers.

  10. Historical Photograph of the Michoud Assembly Facility (MAF)

    NASA Technical Reports Server (NTRS)

    1963-01-01

    NASA's Michoud Assembly Facility, located in eastern New Orleans, Louisiana, is an 832 acre site that is a government-owned, contractor-operated component of the George C. Marshall Space Flight Center (MSFC). The facility was acquired by NASA in 1961 at the recommendation of Dr. Wernher von Braun and his rocket team in Huntsville Alabama. The cavernous plant served as the assembly facility for the Saturn launch vehicles and most recently the external tank (ET) used for the Space Shuttle Program. The facility features one of the world's biggest manufacturing plants with 43 acres under one roof and a port with deep-water access for the transportation of large space structures. When completed, space hardware is towed on a barge across the Gulf of Mexico, around Florida and up to Kennedy Space Center. The original tract of land was part of a 34,500 acre French Royal land grant to local merchant, Gilbert Antoine de St. Maxent in 1763. Later, the land was acquired by French transplant Antoine Michoud, the son of Napoleon's Administrator of Domains, who moved to the city in 1827. Michoud operated a sugar cane plantation and refinery on the site until his death in 1863. His heirs continued operating the refinery and kept the original St. Maxent estate intact into the 20th century. Two brick smokestacks from the original refinery still stand before the Michoud facility today as seen in the lower half of this photograph taken in the 1960's, while the upper half reflects the area during the time of the sugar cane plantation workers.

  11. 40 CFR 60.691 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... collection point for stormwater runoff received directly from refinery surfaces and for refinery wastewater... chamber in a stationary manner and which does not move with fluctuations in wastewater levels. Floating... separator. Junction box means a manhole or access point to a wastewater sewer system line. No detectable...

  12. 40 CFR 60.100 - Applicability, designation of affected facility, and reconstruction.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... petroleum refineries: fluid catalytic cracking unit catalyst regenerators, fuel gas combustion devices, and... petroleum refinery. (b) Any fluid catalytic cracking unit catalyst regenerator or fuel gas combustion device... regenerator under paragraph (b) of this section which commences construction, reconstruction, or modification...

  13. 40 CFR 60.100 - Applicability, designation of affected facility, and reconstruction.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... petroleum refineries: fluid catalytic cracking unit catalyst regenerators, fuel gas combustion devices, and... petroleum refinery. (b) Any fluid catalytic cracking unit catalyst regenerator or fuel gas combustion device... regenerator under paragraph (b) of this section which commences construction, reconstruction, or modification...

  14. Cancer incidence among copper smelting and nickel refining workers in Finland.

    PubMed

    Pavela, Markku; Uitti, Jukka; Pukkala, Eero

    2017-01-01

    Among workers employed at a nickel refinery in Harjavalta, Finland an increased risk of lung and sinus cancer has been demonstrated in two previous studies. The current study adds 16 more years of follow-up to these studies. A total of 1,115 persons exposed to nickel and 194 non-exposed workers in the Harjavalta nickel smelter and refinery were followed up for cancer from 1967 to 2011 through the Finnish Cancer Registry. The total number of cancer cases in men was 251 (Standardized incidence ratio (SIR) 1.05) and in women 12 (SIR 1.22). In the most nickel-exposed work site (refinery), there were 14 lung cancers (SIR 2.01) and 3 sinonasal cancers (SIR 26.7, 95%). It is likely that exposure to nickel compounds is the main reason for elevated nasal cancer risk among the nickel refinery employees and may also contribute to the excess risk of lung cancer. Am. J. Ind. Med. 60:87-95, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  15. Troubleshooting crude vacuum tower overhead ejector systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lines, J.R.; Frens, L.L.

    1995-03-01

    Routinely surveying tower overhead vacuum systems can improve performance and product quality. These vacuum systems normally provide reliable and consistent operation. However, process conditions, supplied utilities, corrosion, erosion and fouling all have an impact on ejector system performance. Refinery vacuum distillation towers use ejector systems to maintain tower top pressure and remove overhead gases. However, as with virtually all refinery equipment, performance may be affected by a number of variables. These variables may act independently or concurrently. It is important to understand basic operating principles of vacuum systems and how performance is affected by: utilities, corrosion and erosion, fouling, andmore » process conditions. Reputable vacuum-system suppliers have service engineers that will come to a refinery to survey the system and troubleshoot performance or offer suggestions for improvement. A skilled vacuum-system engineer may be needed to diagnose and remedy system problems. The affect of these variables on performance is discussed. A case history is described of a vacuum system on a crude tower in a South American refinery.« less

  16. Mines and mineral processing facilities in the vicinity of the March 11, 2011, earthquake in northern Honshu, Japan

    USGS Publications Warehouse

    Menzie, W. David; Baker, Michael S.; Bleiwas, Donald I.; Kuo, Chin

    2011-01-01

    U.S. Geological Survey data indicate that the area affected by the March 11, 2011, magnitude 9.0 earthquake and associated tsunami is home to nine cement plants, eight iodine plants, four iron and steel plants, four limestone mines, three copper refineries, two gold refineries, two lead refineries, two zinc refineries, one titanium dioxide plant, and one titanium sponge processing facility. These facilities have the capacity to produce the following percentages of the world's nonfuel mineral production: 25 percent of iodine, 10 percent of titanium sponge (metal), 3 percent of refined zinc, 2.5 percent of refined copper, and 1.4 percent of steel. In addition, the nine cement plants contribute about one-third of Japan's cement annual production. The iodine is a byproduct from production of natural gas at the Miniami Kanto gas field, east of Tokyo in Chiba Prefecture. Japan is the world's second leading (after Chile) producer of iodine, which is processed in seven nearby facilities.

  17. [Factors of work environment and employment of workers in production of fuels and solvents at the oil refinery].

    PubMed

    Chebotarev, P A; Kharlashova, N V

    2012-01-01

    Factors of the industrial environment and labor activity of workers of manufacture propellants and solvents at the oil refining enterprise. Working conditions of workers at all installations of manufacture No 1 JSC "Naftan" of Novopolotsk of Byelorussia (production of fuels and solvents). Hygienic evaluation of working conditions of persons working in the production of fuels and solvents at the oil refinery. Sanitary description of the production with hygienic analysis of project design and technological documentation, qualitative and quantitative characteristics of conventional methods in the work environment and working process of employees in the workplace for the main modes of operation of the equipment. The working environment of refineries is influenced by a number of simultaneously acting factors, which have different material nature and characteristics of the action on the human body, the workers in production of fuels and solvents at the refinery, are exposed to a variety of hazardous and dangerous factors of production, a chemical factor is prevalent, of course.

  18. Analyzing Perceptions of Wellbeing in Relation to Refinería Esmeraldas, The Largest Oil Refinery in Ecuador

    NASA Astrophysics Data System (ADS)

    Toledo, K. S.; Valdivia, G.

    2016-12-01

    Refinería Esmeraldas, the largest oil refinery in Ecuador, has a great influence on the wellbeing of the mainly Afro-Ecuadorean neighborhoods that surround it. Understanding the extent of the refinery's influence on the local community is important as it contributes to a more effective planning for the predicted risks of environmental suffering associated with it, some of which may extend for generations to come. The problem of increased environmental burdens in low income communities of color, such as exposure to environmental pollutants, is often linked to improper regulation. Solutions are often framed in terms of stricter government policies, but equally important and more difficult to quantify factors, such as how pollution manifests in everyday life, also need to be addressed. This study uses primarily qualitative data, composed of structured interviews; spatial data; and audiovisual data, all of which was processed using analytic softwares such as Atlas.ti, Tableau, and ArcGIS, to map the experience of pollution and wellbeing in the city of Esmeraldas. The data was collected using a structured sample design, followed by snowball sampling in neighborhoods within the city. The findings indicate that the impacts of the refinery are not always direct, but rather affect various aspects of the life of Esmeraldeños. Several major wellbeing themes include Personal Trajectories, (Dis)able Bodies, and Urban Needs. These themes provide a more holistic understanding of life with pollution and help understand how people see themselves in relation to the refinery and how it affects their wellbeing. Grounded theory, which adopts an inductive approach, was used to analyze the everyday dimensions of the experience of pollution. The findings suggest that there are varying experiences of wellbeing in relation the refinery and that these have health, environmental, social, and physiological roots, which indicate possible connections between epigenetic manifestations and the historical presence of the refinery. This finding suggests the need for socioenvironmental models that bridge the gap in how we study the relation between environmental dimensions with the bodies of those living within it, suggesting that it is necessary to better understand how biological and physical environments influence one another.

  19. Energy markets : refinery outages can have varying gasoline price impacts, but gaps in federal data limit understanding of impacts.

    DOT National Transportation Integrated Search

    2009-07-01

    In 2008, GAO reported that, with : the exception of the period : following Hurricanes Katrina and : Rita, refinery outages in the United : States did not show discernible : trends in reduced production : capacity, frequency, and location : from 2002 ...

  20. REMOTE SENSING DAMAGE ASSESSMENT OF CHEMICAL PLANTS AND REFINERIES FOLLOWING HURRICANES KATRINA AND RITA

    EPA Science Inventory

    The massive destruction brought by Hurricanes Katrina and Rita also impacted the many chemical plants and refineries in the region. The achievement of this rapid analysis capability highlights the advancement of this technology for air quality assessment and monitoring. Case st...

  1. 77 FR 29362 - Conocophillips Company, Trainer Refinery, Trainer, PA; Notice of Affirmative Determination...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-17

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-81,066] Conocophillips Company, Trainer Refinery, Trainer, PA; Notice of Affirmative Determination Regarding Application for... conclude that the claim is of sufficient weight to justify reconsideration of the U.S. Department of Labor...

  2. 76 FR 9013 - Agency Information Collection Activities; Proposed Collection; Comment Request; Detergent Gasoline

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-16

    ... Activities; Proposed Collection; Comment Request; Detergent Gasoline AGENCY: Environmental Protection Agency... this action are those who (1) Manufacture gasoline, post-refinery component, or detergent additives, (2) blend detergent additives into gasoline or post-refinery component, or (3) transport or receive a...

  3. 40 CFR 80.1667 - Attest engagement requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... subject to national standards and Small Refiner and Small Volume Refinery Status. (1) If the refiner... a written representation from the company representative stating the refinery produces gasoline from crude oil. (2) Obtain the annual average sulfur level from paragraph (b)(3) of this section. (3) Compute...

  4. Final Petroleum Refinery Sector Risk and Technology Review and New Source Performance Standards (NSPS) Fact Sheets

    EPA Pesticide Factsheets

    This page contains 3 September 2015 fact sheets with information regarding the final residual risk and technology review for the petroleum refinery source categories. The fact sheets provide an overview, a summary of changes, effects for the community.

  5. 40 CFR 60.100 - Applicability, designation of affected facility, and reconstruction.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... petroleum refineries: fluid catalytic cracking unit catalyst regenerators, fuel gas combustion devices, and... petroleum refinery. (b) Any fluid catalytic cracking unit catalyst regenerator or fuel gas combustion device...) and (d) of this section. (c) Any fluid catalytic cracking unit catalyst regenerator under paragraph (b...

  6. 40 CFR 60.100 - Applicability, designation of affected facility, and reconstruction.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... petroleum refineries: fluid catalytic cracking unit catalyst regenerators, fuel gas combustion devices, and... petroleum refinery. (b) Any fluid catalytic cracking unit catalyst regenerator or fuel gas combustion device...) and (d) of this section. (c) Any fluid catalytic cracking unit catalyst regenerator under paragraph (b...

  7. 40 CFR 60.100 - Applicability, designation of affected facility, and reconstruction.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... petroleum refineries: fluid catalytic cracking unit catalyst regenerators, fuel gas combustion devices, and... petroleum refinery. (b) Any fluid catalytic cracking unit catalyst regenerator or fuel gas combustion device...) and (d) of this section. (c) Any fluid catalytic cracking unit catalyst regenerator under paragraph (b...

  8. Treatment and disposal of refinery sludges: Indian scenario.

    PubMed

    Bhattacharyya, J K; Shekdar, A V

    2003-06-01

    Crude oil is a major source of energy and feedstock for petrochemicals. Oily sludge, bio-sludge and chemical sludge are the major sludges generated from the processes and effluent treatment plants of the refineries engaged in crude oil refining operations. Refineries in India generate about 28,220 tons of sludge per annum. Various types of pollutants like phenols, heavy metals, etc. are present in the sludges and they are treated as hazardous waste. Oily sludge, which is generated in much higher amount compared to other sludges, contains phenol (90-100 mg/kg), nickel (17-25 mg/kg), chromium (27-80 mg/kg), zinc (7-80 mg/kg), manganese (19-24 mg/kg), cadmium (0.8-2 mg/kg), copper (32-120 mg/kg) and lead (0.001-0.12 mg/ kg). Uncontrolled disposal practices of sludges in India cause degradation of environmental and depreciation of aesthetic quality. Environmental impact due to improper sludge management has also been identified. Salient features of various treatment and disposal practices have been discussed. Findings of a case study undertaken by the authors for Numaligarh Refinery in India have been presented. Various system alternatives have been identified for waste management in Numaligarh Refinery. A ranking exercise has been carried out to evaluate the alternatives and select the appropriate one. A detailed design of the selected waste management system has been presented.

  9. Analysis of snow-cap pollution for air quality assessment in the vicinity of an oil refinery.

    PubMed

    Krastinyte, Viktorija; Baltrenaite, Edita; Lietuvninkas, Arvydas

    2013-01-01

    Snow-cap can be used as a simple and effective indicator of industrial air pollution. In this study snow-cap samples were collected from 11 sites located in the vicinity of an oil refinery in Mazeikiai, a region in the north-west of Lithuania, in the winter of 2011. Analysis of snowmelt water and snow-dust was used to determine anthropogenic pollutants such as: sulphates and chlorides, nitrites, nitrates, ammonium nitrogen, total carbon, total nitrogen; heavy metals: lead (Pb), copper (Cu), chromium (Cr), cadmium (Cd). Concentrations of heavy metals in snow-dust were detected thousands of times higher than those in the snowmelt water. In this study, analysis of heavy metal concentration was conducted considering different distances and the wind direction within the impact zone of the oil refinery. The sequence of heavy metals according to their mean concentrations in the snow-dust samples was the following: Pb > Cr > Cu > Cd. Heavy metals highly correlated among each other. The load of snow-dust was evaluated to determine the pollution level in the study area. The highest daily load of snow-dust was 45.81 +/- 12.35 mg/m2 in the north-western direction from the oil refinery. According to classification of the daily load of snow-dust a lower than medium-risk level of pollution was determined in the vicinity of the oil refinery.

  10. Polycyclic aromatic hydrocarbons, aliphatic hydrocarbons, trace elements and monooxygenase activity in birds nesting on the North Platte River, Casper, Wyoming, USA

    USGS Publications Warehouse

    Custer, T.W.; Custer, Christine M.; Dickerson, K.; Allen, K.; Melancon, M.J.; Schmidt, L.J.

    2001-01-01

    Tree swallow (Tachycineta bicolor) and house wren (Troglodytes aedon) eggs and chicks were collected near a refinery site on the North Platte River, Casper, Wyoming, USA and at a reference site 10 km upstream. Total polycylic aromatic hydrocarbon (PAH) concentrations in swallow and wren chicks were higher at the refinery site than at the reference site. Polycylic aromatic hydrocarbon concentrations in sediment and chick dietary samples were consistent with these findings. The general lack of methylated PAHs in sediment, diet, and bird carcasses suggested that the PAHs were derived from combustion and not from petroleum. The predominance of odd numbered aliphatic hydrocarbons and the low ratios (≤ 0.25) of pristane: n-C17 and phytane: n-C18 in chick and diet samples also suggested that swallow and wren chicks were not being chronically exposed to petroleum. Mean ethoxyresorufin-O-dealkylase and benzyloxyresorufin-O-dealkylase activities in tree swallow livers averaged nine times higher at the refinery site than at the reference site and were probably induced by exposure to PAHs. Trace element concentrations in eggs and livers of swallows and wrens were similar or greater at the reference site than at the refinery site. Selenium, strontium, and boron concentrations were elevated in eggs and livers of swallows and wrens at both the refinery and reference sites.

  11. Hazardous waste management and weight-based indicators--the case of Haifa Metropolis.

    PubMed

    Elimelech, E; Ayalon, O; Flicstein, B

    2011-01-30

    The quantity control of hazardous waste in Israel relies primarily on the Environmental Services Company (ESC) reports. With limited management tools, the Ministry of Environmental Protection (MoEP) has no applicable methodology to confirm or monitor the actual amounts of hazardous waste produced by various industrial sectors. The main goal of this research was to develop a method for estimating the amounts of hazardous waste produced by various sectors. In order to achieve this goal, sector-specific indicators were tested on three hazardous waste producing sectors in the Haifa Metropolis: petroleum refineries, dry cleaners, and public hospitals. The findings reveal poor practice of hazardous waste management in the dry cleaning sector and in the public hospitals sector. Large discrepancies were found in the dry cleaning sector, between the quantities of hazardous waste reported and the corresponding indicator estimates. Furthermore, a lack of documentation on hospitals' pharmaceutical and chemical waste production volume was observed. Only in the case of petroleum refineries, the reported amount was consistent with the estimate. Copyright © 2010 Elsevier B.V. All rights reserved.

  12. Use of activated carbon to remove undesirable residual amylase from refinery streams

    USDA-ARS?s Scientific Manuscript database

    In recent years, there has been increased world-wide concern over residual (carry-over)activity of mostly high temperature (HT) and very high temperature (VHT) stable amylases in white, refined sugars from refineries to various food and end-user industries. HT and VHT stable amylases were developed ...

  13. 76 FR 52556 - Election To Expense Certain Refineries

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-23

    ... the manufacture, construction, or production of self-constructed property must begin before January 1... is entered into prior to the manufacture, construction, or production of the property for use by the... refinery be designed to serve the primary purpose of processing liquid fuel from crude oil or qualified...

  14. Interdisciplinary study of atmospheric processes and constituents of the mid-Atlantic coastal region. Attachment 3: Data set for Craney Island oil refinery installation experiment. [air pollution monitoring

    NASA Technical Reports Server (NTRS)

    Kindle, E. C.; Bandy, A.; Copeland, G.; Blais, R.; Levy, G.; Sonenshine, D.; Adams, D.; Maier, G.

    1975-01-01

    Data tables and maps are presented which include background information and experimental data on the Craney Island oil refinery installation experiment. The experiment was to investigate air pollution effects.

  15. Development of a factory/refinery method to measure total, soluble, and insoluble starch in sugar products

    USDA-ARS?s Scientific Manuscript database

    An easy, rapid, and inexpensive method was developed to measure total, soluble, and insoluble starch in products at the factory and refinery, using microwave-assisted neutralization chemistry. The method was optimized using the previously developed USDA Starch Research method as a reference. Optimal...

  16. 75 FR 31711 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Control of Nitrogen...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-04

    ... Boilers and Process Heaters at Petroleum Refineries AGENCY: Environmental Protection Agency (EPA). ACTION... controlling nitrogen oxide (NOx) emissions from industrial boilers. This action is being taken under the Clean...--Control of Nitrogen Oxide Emissions from Industrial Boilers and Process Heaters at Petroleum Refineries in...

  17. 77 FR 3211 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Amendments to the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-23

    ... Emissions From Industrial Boilers and Process Heaters at Petroleum Refineries AGENCY: Environmental... that establishes controls for nitrogen oxides (NO X ) emissions from industrial boilers and process... carbon monoxide (CO) boiler at the Delaware City Refinery and providing for a facility-wide NOx emission...

  18. PORTABLE IMAGING DEVICES FOR INDUSTRIAL LEAK DETECTION AT PETROLEUM REFINERIES AND CHEMICAL PLANTS

    EPA Science Inventory

    Undiscovered gas leaks, or fugitive emissions, in chemical plants and refinery operations can impact regional air quality as well as being a public health problem. Surveying a facility for potential gas leaks can be a daunting task. Industrial Leak Detection and Repair (LDAR) pro...

  19. ESTE: Verification of Portable Optical and Thermal Imaging Devices for Leak Detection at Petroleum Refineries and Chemical Plants

    EPA Science Inventory

    This is an ESTE project summary brief. EPA’s Environmental Technology Verification Program (ETV) is verifying the performance of portable optical and thermal imaging devices for leak detection at petroleum refineries and chemical plans. Industrial facilities, such as chemical p...

  20. 77 FR 28489 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Amendments to the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-15

    ... Emissions From Industrial Boilers and Process Heaters at Petroleum Refineries AGENCY: Environmental... controls for nitrogen oxides (NO X ) emissions from industrial boilers and process heaters at petroleum... industrial boilers and process heaters at petroleum refineries. The formal SIP revision was submitted by...

  1. Development of a research method to measure insoluble and soluble starch in sugarcane factory and refinery products

    USDA-ARS?s Scientific Manuscript database

    A rapid, quantitative research method using microwave-assisted probe ultrasonication was developed to facilitate the determination of total insoluble, and soluble starch in various sugar factory and refinery products. Several variables that affect starch solubilization were evaluated: 1) conductiv...

  2. 76 FR 7189 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... Refinery Wastewater Systems (Renewal) AGENCY: Environmental Protection Agency (EPA). ACTION: Notice... Wastewater Systems (Renewal) ICR Numbers: EPA ICR Number 1136.10, OMB Control Number 2060-0172. ICR Status... (NSPS) for Volatile Organic Compound (VOC) Emissions from Petroleum Refinery Wastewater Systems were...

  3. Refinery Outages: Description and Potential Impact on Petroleum Product Prices

    EIA Publications

    2007-01-01

    This report responds to a July 13, 2006 request from Chairman Jeff Bingaman of the Senate Committee on Energy and Natural Resources requested that the Energy Information Administration conduct a study of the impact that refinery shutdowns have had on the price of oil and gasoline.

  4. Battle of the starches: Insoluble versus soluble at the refinery

    USDA-ARS?s Scientific Manuscript database

    A study using the USDA starch research method has been conducted to evaluate the effects of total, insoluble, and soluble starch on raw sugar filterability and viscosity in international carbonatation refineries. Raw sugar qualities, i.e., pol, color, % invert, ash, and dextran, were also studied in...

  5. Gastrointestinal parasites in an isolated Norwegian population of wild red deer (Cervus elaphus)

    USDA-ARS?s Scientific Manuscript database

    Thirteen red deer, culled from the isolated population at the Mongstad Oil Refinery, were investigated for gastrointestinal helminths. These animals, enclosed by the refinery fence, do not have contact with other ruminants and have a high population density considering the available browsing area (1...

  6. Final Environmental Impact Statement for Oil Refinery, Georgetown, South Carolina. Volume 1.

    DTIC Science & Technology

    1984-09-01

    o, Ceeld furthler ’nPact. deonoC Illy viable. Minor reduc, effects new considered minor . degradation at Savanna but mould probibly met all OMQS...significantly due to - considered minor ; large spills other developments. Minor u ’ anlikely. but potentially very adverse impact at Savannah. damaging...7o signifi cnt o siqnifIcant Impact. Minor adverse GRct at Unending n c&Wdltins. coud further - inpact. Savannah. reduce effects of weste discharge p

  7. Data on evolutionary relationships between hearing reduction with history of disease and injuries among workers in Abadan Petroleum Refinery, Iran.

    PubMed

    Mohammadi, Mohammad Javad; Ghazlavi, Ebtesam; Gamizji, Samira Rashidi; Sharifi, Hajar; Gamizji, Fereshteh Rashidi; Zahedi, Atefeh; Geravandi, Sahar; Tahery, Noorollah; Yari, Ahmad Reza; Momtazan, Mahboobeh

    2018-02-01

    The present work examined data obtained during the analysis of Hearing Reduction (HR) of Abadan Petroleum Refinery (Abadan PR) workers of Iran with a history of disease and injuries. To this end, all workers in the refinery were chosen. In this research, the effects of history of disease and injury including trauma, electric shock, meningitis-typhoid disease and genetic illness as well as contact with lead, mercury, CO 2 and alcohol consumption were evaluated (Lie, et al., 2016) [1]. After the completion of the questionnaires by workers, the coded data were fed into EXCELL. Statistical analysis of data was carried out, using SPSS 16.

  8. Refinery buyers and sellers hunt cash

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gill, D.

    1995-07-01

    There`s a high-risk premium in the petroleum refining business today. The ability to transfer assets is viewed with a high degree of skepticism, and capital is not freely available. There are willing buyers and sellers for refinery assets today, but it is tough to qualify for a loan. Private financing also was responsible for a refinery deal that closed recently - the sale of Kerr-McGee`s 100,000-b/d unit in Corpus Christi, Texas. After nearly 3 years on the market, this unit was finally bought by a deep-pocketed private firm, Koch Industries of Wichita, Kan. The purchase price has not been disclosed,more » but it was probably not rich.« less

  9. Role of RIS/APC for manufacturing RFG/LSD. [Refinery Information Systems/Advanced Process Control, ReFormulated Gasoline/Low Sulfur Diesels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Latour, P.R.

    Revolutionary changes in quality specifications (number, complexity, uncertainty, economic sensitivity) for reformulated gasolines (RFG) and low-sulfur diesels (LSD) are being addressed by powerful, new, computer-integrated manufacturing technology for Refinery Information Systems and Advanced Process Control (RIS/APC). This paper shows how the five active RIS/APC functions: performance measurement, optimization, scheduling, control and integration are used to manufacture new, clean fuels competitively. With current industry spending for this field averaging 2 to 3 cents/bbl crude, many refineries can capture 50 to 100 cents/bbl if the technology is properly employed and sustained throughout refining operations, organizations, and businesses.

  10. Evaluation of the Liberian Petroleum Refining Company operations: crude oil refining vs product importation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Samuels, G.; Barron, W.F.; Barnes, R.W.

    1985-02-01

    This report is one of a series of project papers providing background information for an assessment of energy options for Liberia, West Africa. It presents information on a controversial recommendation of the energy assessment - that the only refinery in the country be closed and refined products be imported for a savings of approximately $20 million per year. The report reviews refinery operations, discusses a number of related issues, and presents a detailed analysis of the economics of the refinery operations as of 1982. This analysis corroborates the initial estimate of savings to be gained from importing all refined products.more » 1 reference, 24 tables.« less

  11. Peroxidase-catalyzed removal of phenols from a petroleum refinery wastewater.

    PubMed

    Wagner, M; Nicell, J A

    2001-01-01

    The phenol content of a petroleum refinery wastewater was reduced below the discharge limit following treatment with horseradish peroxidase and H2O2. Approximately 58% of COD, 78% of BOD5, and 95% of toxicity were removed along with the phenols. As a result of treatment, phenols were transformed into less biodegradable compounds which could be removed by subsequent coagulation and precipitation. Optimization of the peroxide concentration led to 20% enzyme savings. The use of PEG and chitosan as protective additives resulted in 4 and 25-fold reductions in enzyme requirements, respectively. Phenol removal did not appear to be adversely affected by the presence of other hydrocarbons that are frequently present in refinery wastewaters.

  12. Ecological Importance of Large-Diameter Trees in a Temperate Mixed-Conifer Forest

    PubMed Central

    Lutz, James A.; Larson, Andrew J.; Swanson, Mark E.; Freund, James A.

    2012-01-01

    Large-diameter trees dominate the structure, dynamics and function of many temperate and tropical forests. Although both scaling theory and competition theory make predictions about the relative composition and spatial patterns of large-diameter trees compared to smaller diameter trees, these predictions are rarely tested. We established a 25.6 ha permanent plot within which we tagged and mapped all trees ≥1 cm dbh, all snags ≥10 cm dbh, and all shrub patches ≥2 m2. We sampled downed woody debris, litter, and duff with line intercept transects. Aboveground live biomass of the 23 woody species was 507.9 Mg/ha, of which 503.8 Mg/ha was trees (SD = 114.3 Mg/ha) and 4.1 Mg/ha was shrubs. Aboveground live and dead biomass was 652.0 Mg/ha. Large-diameter trees comprised 1.4% of individuals but 49.4% of biomass, with biomass dominated by Abies concolor and Pinus lambertiana (93.0% of tree biomass). The large-diameter component dominated the biomass of snags (59.5%) and contributed significantly to that of woody debris (36.6%). Traditional scaling theory was not a good model for either the relationship between tree radii and tree abundance or tree biomass. Spatial patterning of large-diameter trees of the three most abundant species differed from that of small-diameter conspecifics. For A. concolor and P. lambertiana, as well as all trees pooled, large-diameter and small-diameter trees were spatially segregated through inter-tree distances <10 m. Competition alone was insufficient to explain the spatial patterns of large-diameter trees and spatial relationships between large-diameter and small-diameter trees. Long-term observations may reveal regulation of forest biomass and spatial structure by fire, wind, pathogens, and insects in Sierra Nevada mixed-conifer forests. Sustaining ecosystem functions such as carbon storage or provision of specialist species habitat will likely require different management strategies when the functions are performed primarily by a few large trees as opposed to many smaller trees. PMID:22567132

  13. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rigali, Mark J.; Pye, Steven; Hardin, Ernest

    This study considers the feasibility of large diameter deep boreholes for waste disposal. The conceptual approach considers examples of deep large diameter boreholes that have been successfully drilled, and also other deep borehole designs proposed in the literature. The objective for large diameter boreholes would be disposal of waste packages with diameters of 22 to 29 inches, which could enable disposal of waste forms such as existing vitrified high level waste. A large-diameter deep borehole design option would also be amenable to other waste forms including calcine waste, treated Na-bonded and Na-bearing waste, and Cs and Sr capsules.

  14. Source identification of ambient PM 2.5 during summer inhalation exposure studies in Detroit, MI

    NASA Astrophysics Data System (ADS)

    Morishita, Masako; Keeler, Gerald J.; Wagner, James G.; Harkema, Jack R.

    Particulate air pollution is associated with cardiopulmonary morbidity and mortality in heavily populated urban centers of the United States. Because ambient fine particulate matter (aerodynamic diameter ⩽2.5 μm; PM 2.5) is a complex mixture resulting from multiple sources and variable atmospheric conditions, it is difficult to identify specific components of PM 2.5 that are responsible for adverse health effects. During four consecutive summers from 2000 to 2003 we characterized the ambient gaseous and PM 2.5 air quality in an urban southwest Detroit community where childhood asthma hospitalization rates are more than twice the statewide average. Both integrated and continuous PM measurements together with gaseous air pollution measurements were performed using a mobile air research facility, AirCARE1, in which concurrent toxicological studies were being conducted. Chemical and physical characterizations of PM 2.5 as well as receptor modeling using positive matrix factorization (PMF) were completed. Results from PMF indicated that six major sources contributed to the observed ambient PM 2.5 mass during the summer months. Primary sources included (1) coal combustion/secondary sulfate aerosol, (2) motor vehicle/urban road dust, (3) municipal waste incinerators, (4) oil combustion/refineries, (5) sewage sludge incinerators, and (6) iron/steel manufacturing. Although the contribution of the coal/secondary sulfate aerosol source was greater than other factors, increased levels of urban PM 2.5 from local combustion sources were also observed. In addition to characterization of ambient PM 2.5 and their sources in southwest Detroit, this paper discusses possible associations of ambient PM 2.5 from local combustion sources, specifically incinerator and refinery emissions and the observed adverse health effects during the inhalation exposure campaigns.

  15. Pathways of inhalation exposure to manganese in children living near a ferromanganese refinery: A structural equation modeling approach

    EPA Science Inventory

    Manganese (Mn) is both essential element and neurotoxicant. Exposure to Mn can occur from various sources and routes. Structural equation modeling was used to examine routes of exposure to Mn among children residing near a ferromanganese refinery in Marietta, Ohio. An inhalation ...

  16. Potential Air Emission Impacts of Cellulosic Ethanol Production at Seven Demonstration Refineries in the United States

    EPA Science Inventory

    This paper reports on the estimated potential air emissions as found in air permits and supporting documentation for seven of the first group of pre-commercial or Ademonstration@ U.S. cellulosic ethanol refineries currently operating or planning to operate in the near future. Th...

  17. 40 CFR 80.133 - Agreed-upon procedures for refiners and importers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... oxygenate type and volume, and oxygen volume required to be hand blended with the RBOB, in accordance with... each refinery. (3) Obtain a written representation from a company representative that the report copies... inventory reconciliation analysis for the refinery or importer for the reporting period by product type (i.e...

  18. 40 CFR 63.640 - Applicability and designation of affected source.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... plant vents; and (5) Emission points routed to a fuel gas system, as defined in § 63.641 of this subpart. No testing, monitoring, recordkeeping, or reporting is required for refinery fuel gas systems or emission points routed to refinery fuel gas systems. (e) The owner or operator of a storage vessel...

  19. 40 CFR 60.101 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... crude oil removed from the earth and the oils derived from tar sands, shale, and coal. (c) Process gas means any gas generated by a petroleum refinery process unit, except fuel gas and process upset gas as defined in this section. (d) Fuel gas means any gas which is generated at a petroleum refinery and which...

  20. 40 CFR 60.101 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... crude oil removed from the earth and the oils derived from tar sands, shale, and coal. (c) Process gas means any gas generated by a petroleum refinery process unit, except fuel gas and process upset gas as defined in this section. (d) Fuel gas means any gas which is generated at a petroleum refinery and which...

  1. 40 CFR 63.640 - Applicability and designation of affected source.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... plant vents; and (5) Emission points routed to a fuel gas system, as defined in § 63.641 of this subpart. No testing, monitoring, recordkeeping, or reporting is required for refinery fuel gas systems or emission points routed to refinery fuel gas systems. (e) The owner or operator of a storage vessel...

  2. 40 CFR 63.640 - Applicability and designation of affected source.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... reformer catalyst regeneration vents, and sulfur plant vents; and (5) Emission points routed to a fuel gas... required for refinery fuel gas systems or emission points routed to refinery fuel gas systems. (e) The... petroleum refining process unit that is subject to this subpart; (3) Units processing natural gas liquids...

  3. 40 CFR 60.101 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... crude oil removed from the earth and the oils derived from tar sands, shale, and coal. (c) Process gas means any gas generated by a petroleum refinery process unit, except fuel gas and process upset gas as defined in this section. (d) Fuel gas means any gas which is generated at a petroleum refinery and which...

  4. 40 CFR 63.640 - Applicability and designation of affected source.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... reformer catalyst regeneration vents, and sulfur plant vents; and (5) Emission points routed to a fuel gas... required for refinery fuel gas systems or emission points routed to refinery fuel gas systems. (e) The... petroleum refining process unit that is subject to this subpart; (3) Units processing natural gas liquids...

  5. 40 CFR 60.101 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... crude oil removed from the earth and the oils derived from tar sands, shale, and coal. (c) Process gas means any gas generated by a petroleum refinery process unit, except fuel gas and process upset gas as defined in this section. (d) Fuel gas means any gas which is generated at a petroleum refinery and which...

  6. 40 CFR 63.9881 - Am I subject to this subpart?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) National Emissions Standards for Hazardous Air Pollutants for Primary Magnesium Refining What This Subpart... primary magnesium refinery that is (or is part of) a major source of hazardous air pollutant (HAP) emissions. Your primary magnesium refinery is a major source of HAP if it emits or has the potential to emit...

  7. 40 CFR 63.9881 - Am I subject to this subpart?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) National Emissions Standards for Hazardous Air Pollutants for Primary Magnesium Refining What This Subpart... primary magnesium refinery that is (or is part of) a major source of hazardous air pollutant (HAP) emissions. Your primary magnesium refinery is a major source of HAP if it emits or has the potential to emit...

  8. 40 CFR 63.9881 - Am I subject to this subpart?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) National Emissions Standards for Hazardous Air Pollutants for Primary Magnesium Refining What This Subpart... primary magnesium refinery that is (or is part of) a major source of hazardous air pollutant (HAP) emissions. Your primary magnesium refinery is a major source of HAP if it emits or has the potential to emit...

  9. 40 CFR 63.9881 - Am I subject to this subpart?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) National Emissions Standards for Hazardous Air Pollutants for Primary Magnesium Refining What This Subpart... primary magnesium refinery that is (or is part of) a major source of hazardous air pollutant (HAP) emissions. Your primary magnesium refinery is a major source of HAP if it emits or has the potential to emit...

  10. 40 CFR 63.9881 - Am I subject to this subpart?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) National Emissions Standards for Hazardous Air Pollutants for Primary Magnesium Refining What This Subpart... primary magnesium refinery that is (or is part of) a major source of hazardous air pollutant (HAP) emissions. Your primary magnesium refinery is a major source of HAP if it emits or has the potential to emit...

  11. 40 CFR 80.270 - Can a refiner seek temporary relief from the requirements of this subpart?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... following information: (i) Detailed description of efforts to obtain capital for refinery investments; (ii) Bond rating of entity that owns the refinery; and (iii) Estimated capital investment needed to comply... necessary for construction, a description of plans to obtain necessary capital, and a detailed estimate of...

  12. 76 FR 42052 - National Emission Standards for Hazardous Air Pollutants From Petroleum Refineries

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-18

    ... under CAA sections 112(d)(2) and (3) for heat exchange systems, which the EPA had not addressed in the... rule addressed residual risk for all Refinery MACT 1 sources, including heat exchange systems. Third... continue to make improvements in emissions reductions, and the heat exchange system standards will reduce...

  13. New and Revised Emissions Factors for Flares and New Emissions Factors for Certain Refinery Process Units and Determination for No Changes to VOC Emissions Factors for Tanks and Wastewater Treatment Systems

    EPA Pesticide Factsheets

    New and Revised Emission Factors for Flares and New Emission Factors for Certain Refinery Process Units and Determination for No Changes to VOC Emission Factors for Tanks and Wastewater Treatment Systems

  14. Test Report for DCU D603 Vent at the ExxonMobil Baytown Refinery Performed July 14 through July 17, 2011

    EPA Pesticide Factsheets

    ExxonMobil owns and operates a petroleum refinery in Baytown, Texas that is subject to the U.S. Clean Air Act (CAA) Sections 111 and 112. This report presents the results of the test program conducted July 14 through 17, 2011.

  15. 40 CFR 80.305 - How are credits generated during the time period 2000 through 2003?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Abt... averaging period. Va = Total volume of gasoline produced during the averaging period at the refinery (or for a foreign refinery, the total volume of gasoline produced during the averaging period at the...

  16. 40 CFR 80.305 - How are credits generated during the time period 2000 through 2003?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Abt... averaging period. Va = Total volume of gasoline produced during the averaging period at the refinery (or for a foreign refinery, the total volume of gasoline produced during the averaging period at the...

  17. 26 CFR 1.179C-1 - Election to expense certain refineries.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... facility, crude or product terminal, or blending facility; or (B) The refinery property is built solely to... waiver received by the taxpayer under that Act. (7) Construction of property—(i) In general. Qualified... construction of the property was in effect before June 14, 2005, and if— (A) The construction of the property...

  18. 26 CFR 1.179C-1T - Election to expense certain refineries (temporary).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...; or (B) The refinery property is built solely to comply with consent decrees or projects mandated by... under that Act. (7) Construction of property—(i) In general. Qualified property will meet the..., 2005, and before January 1, 2012; and (B) No written binding contract for the construction of the...

  19. 77 FR 66869 - Notice of Lodging of Proposed Third Modification to Consent Decree Under the Clean Air Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-07

    ... entitled United States, et al. v. Marathon Ashland Petroleum LLC, Civil Action No. 01-40119 (PVG). Under the original 2001 consent decree, Marathon Ashland Petroleum LLC (``Marathon'') agreed to implement... particulate matter from refinery process units at seven refineries then owned and operated by Marathon...

  20. 40 CFR 98.396 - Data reporting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... product or natural gas liquid listed in Table MM-1 of this subpart that enters the refinery to be further...) [Reserved] (6) For each petroleum product and natural gas liquid (ex refinery gate) listed in Table MM-1 of this subpart, report the annual quantity in metric tons or barrels. For natural gas liquids, quantity...

  1. 40 CFR 80.1622 - Approval for small refiner and small volume refinery status.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... appropriate data to correct the record when the company submits its application. (ii) Foreign small refiners... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Approval for small refiner and small... Approval for small refiner and small volume refinery status. (a) Applications for small refiner or small...

  2. Health hazard evaluation report HETA 82-387-1392, Exxon Corporation, Baton Rouge, Louisiana

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ratcliffe, J.M.; Rosenberg, M.J.; Fox, S.H.

    1983-12-01

    In response to a request from an authorized representative of employees at the Exxon Corporation, Baton Rouge, Louisiana, an investigation was begun into a possible reproductive health hazard at the refinery waste water treatment facility. The refinery processed crude petroleum into a variety of products, processing about 500,000 barrels of crude oil each day. The men had noted what seemed to be an excessive number of spontaneous abortions occurring among their wives. A cross sectional evaluation of sperm concentration and sperm morphology was conducted in wastewater treatment facility workers and two control groups (those who worked in other portions ofmore » the refinery and administrative personnel who did not work in the refinery itself). Of the 68 men employed in the wastewater treatment facility during the 6 month period before this study, six were not eligible for the study. Semen samples were provided by 42 of the 62 eligible men, and by 73 control subjects. After data adjustment for abstinence period, the mean sperm concentration of the unexposed group did not differ significantly from that of the 42 exposed men.« less

  3. How to renovate a 50-year-old wastewater treating plant: Part 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hunter, M.L.

    1996-01-01

    How does an existing refinery cost-effectively renovate wastewater/stormwater treating systems to meet today`s environmental regulations and standards? Faced with solving this problem, Amoco`s Whiting Refinery developed a project team consisting of plant and operations engineers, corporate project and design engineers, contractors and vendors to map out a strategy to re-engineer the existing wastewater treating plant (WWTP) and auxiliary functions. This case history shows how an old refinery limited by existing equipment, building space, operation`s availability requirements and costs divided the project into several design phases. The design team used a proactive approach with empowerment responsibilities to solve construction, equipment usagemore » and regulatory problems throughout the project`s lifetime. Focusing on front-end planning and customer service (the refinery), team members applied value-based engineering designs to keep costs down, implemented safe work practices during construction, used HAZOP reviews to scrutinize proposed designs for operating and maintenance procedures, etc. The result has been the renovation of a 50-year-old WWTP completed under budget, ontime and in compliance with federal mandates.« less

  4. Advanced purification of petroleum refinery wastewater by catalytic vacuum distillation.

    PubMed

    Yan, Long; Ma, Hongzhu; Wang, Bo; Mao, Wei; Chen, Yashao

    2010-06-15

    In our work, a new process, catalytic vacuum distillation (CVD) was utilized for purification of petroleum refinery wastewater that was characteristic of high chemical oxygen demand (COD) and salinity. Moreover, various common promoters, like FeCl(3), kaolin, H(2)SO(4) and NaOH were investigated to improve the purification efficiency of CVD. Here, the purification efficiency was estimated by COD testing, electrolytic conductivity, UV-vis spectrum, gas chromatography-mass spectrometry (GC-MS) and pH value. The results showed that NaOH promoted CVD displayed higher efficiency in purification of refinery wastewater than other systems, where the pellucid effluents with low salinity and high COD removal efficiency (99%) were obtained after treatment, and the corresponding pH values of effluents varied from 7 to 9. Furthermore, environment estimation was also tested and the results showed that the effluent had no influence on plant growth. Thus, based on satisfied removal efficiency of COD and salinity achieved simultaneously, NaOH promoted CVD process is an effective approach to purify petroleum refinery wastewater. Copyright 2010 Elsevier B.V. All rights reserved.

  5. An epidemiological study of petroleum refinery employees.

    PubMed Central

    Wong, O; Morgan, R W; Bailey, W J; Swencicki, R E; Claxton, K; Kheifets, L

    1986-01-01

    A cohort study of 14179 current and former Chevron USA employees at the Richmond and El Segundo, California, refineries was conducted. The cohort consisted of everyone working at either refinery for a minimum of one year. The observed mortality of the cohort, by cause, was compared with the expected based on the United States mortality rates, standardised for age, race, sex, and calendar time. Analyses by refinery, job category, hire date, duration of employment, and latency were performed. For the entire cohort, mortality from all causes was 72.4% of that expected, a deficit that was statistically significant. In addition, a significantly lower mortality was found for all forms of cancer combined, digestive cancer, lung cancer, heart disease, non-malignant respiratory disease, diseases of the digestive system, and accidents. Only lymphopoietic cancer showed a pattern of increased risk suggestive of a possible relation to an occupational exposure. The excess appears confined to cancer of lymphatic tissue (not leukaemias) at Richmond, and only among those hired before 1948. A follow up case analysis of the deaths from lymphatic cancer failed to identify a common exposure pattern. Images PMID:3947563

  6. An investigation of the matrix sensitivity of refinery gas analysis using gas chromatography with flame ionisation detection.

    PubMed

    Ferracci, Valerio; Brown, Andrew S; Harris, Peter M; Brown, Richard J C

    2015-02-27

    The response of a flame ionisation detector (FID) on a gas chromatograph to methane, ethane, propane, i-butane and n-butane in a series of multi-component refinery gas standards was investigated to assess the matrix sensitivity of the instrument. High-accuracy synthetic gas standards, traceable to the International System of Units, were used to minimise uncertainties. The instrument response exhibited a small dependence on the component amount fraction: this behaviour, consistent with that of another FID, was thoroughly characterised over a wide range of component amount fractions and was shown to introduce a negligible bias in the analysis of refinery gas samples, provided a suitable reference standard is employed. No significant effects of the molar volume, density and viscosity of the gas mixtures on the instrument response were observed, indicating that the FID is suitable for the analysis of refinery gas mixtures over a wide range of component amount fractions provided that appropriate drift-correction procedures are employed. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Treatment of Refinery Waste Water Using Environmental Friendly Adsorbent

    NASA Astrophysics Data System (ADS)

    Devi, M. Geetha; Al-Moshrafi, Samira Mohammed Khamis; Al Hudaifi, Alaa; Al Aisari, Buthaina Hamood

    2017-12-01

    This research evaluates the effectiveness of activated carbon prepared from walnut shell in the removal of pollutants from refinery waste water by adsorption technique. A series of batch experiments were carried out by varying the effluent solution pH, stirring time, stirring speed and adsorbent dosage in the reduction of pollutants from refinery effluent. Characterization of the adsorbent was performed using Scanning Electron Microscopy (SEM), Brunauer Emmett and Teller (BET) isotherm and Fourier Transform Infrared (FTIR) Spectroscopy. The best quality activated carbon was obtained with a particle size of 0.75 µm, activation temperature of 800 °C and activation time 24 h. The maximum BET surface area obtained was 165.2653 m2/g. The experimental results demonstrates that the highest percentage reduction in COD was 79%, using 0.6 g walnut shell powder at an optimum stirring speed of 100 rpm, at pH 6 and 120 min of contact time. The outcome of the result shows that walnut shell carbon is a potentially useful adsorbent for the removal of pollutants from refinery waste water.

  8. Long-term follow-up mortality study of petroleum refinery and chemical plant employees.

    PubMed

    Tsai, S P; Gilstrap, E L; Cowles, S R; Snyder, P J; Ross, C E

    1996-01-01

    A previous report presented the 1948-1983 mortality patterns of the Shell Deer Park Manufacturing Complex employees who were employed for at least 3 months from 1948 through 1972. The present study updates the earlier investigation by extending the vital status follow-up through 1989 and by expanding the cohort to include employees hired after 1972. As in the previous study, the overall mortality and cancer mortality for both refinery and chemical employees were quite favorable compared to residents in the local population. Among refinery workers, cancers for which a suspicion of work-relatedness was raised in the previous study, i.e. leukemia and cancers of the central nervous system and biliary passage/liver, no supportive evidence was found in this update. For both refinery and chemical plant employees, the mortality rate due to cancers of all lymphopoietic tissue increased with increasing duration of employment; this finding was also noted by the original study. This was also evident for lymphoreticulosarcoma in refinery employees and for leukemia in chemical plant employees. However, elevations of cancers of all lymphatic and hematopoietic tissue are primarily confined to employees who started work at the complex before 1946. By contrast, deaths from cancer of all lymphatic and hematopoietic tissue for employees hired after 1945 were 22% lower than the comparison population. Seven deaths with mesothelioma mentioned on the death certificates were identified, with 3.2 deaths expected, resulting in a statistically nonsignificant SMR of 219.

  9. Determination of diethanolamine or N-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters.

    PubMed

    Bord, N; Crétier, G; Rocca, J-L; Bailly, C; Souchez, J-P

    2004-09-01

    Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.

  10. 77 FR 30260 - Welded Large Diameter Line Pipe From Japan: Notice of Rescission of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-22

    ... Administration [A-588-857] Welded Large Diameter Line Pipe From Japan: Notice of Rescission of Antidumping Duty... Japan. The review covers five producers/exporters of welded large diameter line pipe from Japan, which... diameter line pipe from Japan for the period December 1, 2010, through November 30, 2011. See Antidumping...

  11. Risk of Asthmatic Episodes in Children Exposed to Sulfur Dioxide Stack Emissions from a Refinery Point Source in Montreal, Canada

    PubMed Central

    Smargiassi, Audrey; Kosatsky, Tom; Hicks, John; Plante, Céline; Armstrong, Ben; Villeneuve, Paul J.; Goudreau, Sophie

    2009-01-01

    Background Little is known about the respiratory effects of short-term exposures to petroleum refinery emissions in young children. This study is an extension of an ecologic study that found an increased rate of hospitalizations for respiratory conditions among children living near petroleum refineries in Montreal (Canada). Methods We used a time-stratified case–crossover design to assess the risk of asthma episodes in relation to short-term variations in sulfur dioxide levels among children 2–4 years of age living within 0.5–7.5 km of the refinery stacks. Health data used to measure asthma episodes included emergency department (ED) visits and hospital admissions from 1996 to 2004. We estimated daily levels of SO2 at the residence of children using a) two fixed-site SO2 monitors located near the refineries and b) the AERMOD (American Meteorological Society/Environmental Protection Agency Regulatory Model) atmospheric dispersion model. We used conditional logistic regression to estimate odds ratios associated with an increase in the interquartile range of daily SO2 mean and peak exposures (31.2 ppb for AERMOD peaks). We adjusted for temperature, relative humidity, and regional/urban background air pollutant levels. Results The risks of asthma ED visits and hospitalizations were more pronounced for same-day (lag 0) SO2 peak levels than for mean levels on the same day, or for other lags: the adjusted odds ratios estimated for same-day SO2 peak levels from AERMOD were 1.10 [95% confidence interval (CI), 1.00–1.22] and 1.42 (95% CI, 1.10–1.82), over the interquartile range, for ED visits and hospital admissions, respectively. Conclusions Short-term episodes of increased SO2 exposures from refinery stack emissions were associated with a higher number of asthma episodes in nearby children. PMID:19440507

  12. Meteorologically estimated exposure but not distance predicts asthma symptoms in schoolchildren in the environs of a petrochemical refinery: a cross-sectional study

    PubMed Central

    2009-01-01

    Background Community concern about asthma prompted an epidemiological study of children living near a petrochemical refinery in Cape Town, South Africa. Because of resource constraints and the complexity of refinery emissions, neither direct environmental measurements nor modelling of airborne pollutants was possible. Instead a meteorologically derived exposure metric was calculated with the refinery as the putative point source. The study aimed to determine whether (1) asthma symptom prevalences were elevated compared to comparable areas in Cape Town and (2) whether there was an association between asthma symptom prevalences and the derived exposure metric. Methods A cross-sectional study was carried out of all consenting school children aged 11 to 14 years attending schools in a defined area, utilizing the International Study of Asthma and Allergy in Childhood (ISAAC) written and video questionnaires. Information was collected on potential confounders, e.g. parental history of atopic disease, active and passive smoking by the participant, birth order, number of children in the home and distance from a major road. The exposure metric combined residential distance of each child from the refinery with a wind vector in the form of wind speed, wind direction and proportion of the year blown. Results A total of 2,361 children from 17 schools met the criteria for inclusion. In multivariate analysis, meteorologically estimated exposure (MEE), but not simple distance from the refinery, was positively associated with having to take an inhaler to school [odds ratio per interquartile range (OR) 1.22, 95% confidence interval (CI) 1.06-1.40], and with a number of video elicited asthma symptoms, including recent waking with wheezing (OR 1.33, 95% CI 1.06-1.66) and frequent wheezing at rest (OR 1.27, 95% CI 1.05 - 1.54). Symptom prevalences were higher than in other areas of the city, with frequent waking with wheezing being in great excess (OR 8.92, 95% CI 4.79-16.63). Conclusion The results support the hypothesis of an increased prevalence of asthma symptoms among children in the area as a result of refinery emissions and provide a substantive basis for community concern. The methodology also provides a low cost means of testing hypotheses about point source pollutant effects on surrounding populations of children. PMID:19781087

  13. Ending America’s Energy Insecurity: How Electric Vehicles Can Drive the Solution to Energy Independence

    DTIC Science & Technology

    2011-12-01

    road oil, aviation gasoline, kerosene, lubricants, naphtha-type jet fuel, pentanes plus, petrochemical feedstocks, special naphthas, still gas... refinery gas), waxes, miscellaneous products, and crude oil burned as fuel. Figure 2. Uses of Oil (EIA, 2010a, p. 148) There is no significant body of...1. Large-Scale Efforts in the 1990s There have been efforts in the past to bring about the adoption of EVs or other zero- emissions vehicles. There

  14. 78 FR 12784 - Welded Large Diameter Line Pipe From Japan; Scheduling of a Full Five-Year Review Concerning the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-25

    ... Diameter Line Pipe From Japan; Scheduling of a Full Five-Year Review Concerning the Antidumping Duty Order on Welded Large Diameter Line Pipe From Japan AGENCY: United States International Trade Commission... revocation of the antidumping duty order on welded large diameter line pipe from Japan would be likely to...

  15. 40 CFR 80.1235 - What gasoline is subject to the benzene requirements of this subpart?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... blendstock or finished gasoline to produce gasoline. (2) Oxygenate added to PCG downstream of the refinery... downstream of the refinery or importer that produced or imported PCG adds oxygenate to such product, it shall... credit generation under this subpart. (3) Butane added to finished gasoline, RBOB, CBOB downstream of the...

  16. 76 FR 50214 - Mandan, Hidatsa and Arikara (MHA) Nation's Refinery, Notice of Availability of the Record of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-12

    ..., gasoline and propane. The NPDES permit will be for surface water discharges associated with the operation.... Since the FEIS was issued, the MHA Nation decided to change the refinery feedstock from synthetic crude oil to the Bakken formation crude. As a result of the feedstock change, EPA evaluated the potential...

  17. Motor System Upgrades Smooth the Way to Savings of $700,000 at Chevron Refinery

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1999-01-01

    By upgrading its motor systems at its Richmond, California refinery, Chevron was able to realize cost savings of more than $700,000 per year, in addition to reduced energy consumption of approximately 1 million kilowatts per month and improved equipment reliability and process control. This fact sheet tells how they did it.

  18. 40 CFR 80.1030 - What are the requirements for gasoline produced at foreign refineries having individual refiner...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false What are the requirements for gasoline... FUELS AND FUEL ADDITIVES Gasoline Toxics Provisions for Foreign Refiners with Individual Toxics Baselines § 80.1030 What are the requirements for gasoline produced at foreign refineries having individual...

  19. 40 CFR 80.1030 - What are the requirements for gasoline produced at foreign refineries having individual refiner...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false What are the requirements for gasoline... FUELS AND FUEL ADDITIVES Gasoline Toxics Provisions for Foreign Refiners with Individual Toxics Baselines § 80.1030 What are the requirements for gasoline produced at foreign refineries having individual...

  20. 40 CFR 80.1030 - What are the requirements for gasoline produced at foreign refineries having individual refiner...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false What are the requirements for gasoline... FUELS AND FUEL ADDITIVES Gasoline Toxics Provisions for Foreign Refiners with Individual Toxics Baselines § 80.1030 What are the requirements for gasoline produced at foreign refineries having individual...

  1. Short-Term Energy Outlook Model Documentation: Petroleum Products Supply Module

    EIA Publications

    2013-01-01

    The Petroleum Products Supply Module of the Short-Term Energy Outlook (STEO) model provides forecasts of petroleum refinery inputs (crude oil, unfinished oils, pentanes plus, liquefied petroleum gas, motor gasoline blending components, and aviation gasoline blending components) and refinery outputs (motor gasoline, jet fuel, distillate fuel, residual fuel, liquefied petroleum gas, and other petroleum products).

  2. 77 FR 5865 - In the Matter of Blue Earth Refineries, Inc.; Order of Suspension of Trading

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of Blue Earth Refineries, Inc.; Order of Suspension of Trading February 2, 2012. It appears to the Securities and Exchange Commission that there is a lack of current and accurate information concerning the securities of Blue Earth...

  3. Seasonal Variations on Sugarcane Trash Quantity and Quality that Directly Concern Refiners

    USDA-ARS?s Scientific Manuscript database

    In sugar manufacture, there is a trend in the United States and world-wide to produce very high purity (VHP) and very low color (VLC) raw sugars for vertical integration from the field to the refinery. New refineries in Louisiana (LA) are expected to be operational in the next few years. One of the...

  4. Application of passive sorbent tube and canister samplers for volatile organic compounds at refinery fenceline locations in Whiting, Indiana

    EPA Science Inventory

    Select volatile organic compounds (VOCs) in ambient air were measured at four fenceline sites at a petroleum refinery in Whiting, Indiana, USA using modified EPA Method 325 A/B with passive tubes and EPA Compendium Method TO-15 with canister samplers. One-week, time-integrated s...

  5. Alternative Fuels Data Center: Rhode Island Transportation Data for

    Science.gov Websites

    (million cubic feet) 94,453 Conventional Power Plants 10 Generating Capacity (nameplate, MW) 1,991 Oil Refineries 0 Oil Refinery Capacity (bbl/day) 0 Renewable Power Plants 2 Renewable Power Plant Capacity More Rhode Island Videos on YouTube Video thumbnail for Cooking Oil Powers Biodiesel Vehicles in Rhode

  6. 76 FR 9743 - Approval for Expanded Manufacturing Authority, Foreign-Trade Subzone 116A, Motiva Enterprises...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-22

    ....99.45 which are used in the production of: --petrochemical feedstocks and refinery by-products (examiner's report, Appendix ``C''); --products for export; --and, products eligible for entry under HTSUS.... Foreign status (19 CFR 146.41, 146.42) products consumed as fuel for the refinery shall be subject to the...

  7. Refiners Switch to RFG Complex Model

    EIA Publications

    1998-01-01

    On January 1, 1998, domestic and foreign refineries and importers must stop using the "simple" model and begin using the "complex" model to calculate emissions of volatile organic compounds (VOC), toxic air pollutants (TAP), and nitrogen oxides (NOx) from motor gasoline. The primary differences between application of the two models is that some refineries may have to meet stricter standards for the sulfur and olefin content of the reformulated gasoline (RFG) they produce and all refineries will now be held accountable for NOx emissions. Requirements for calculating emissions from conventional gasoline under the anti-dumping rule similarly change for exhaust TAP and NOx. However, the change to the complex model is not expected to result in an increase in the price premium for RFG or constrain supplies.

  8. Lymphohematopoietic Cancer Mortality and Morbidity of Workers in a Refinery/Petrochemical Complex in Korea

    PubMed Central

    Kim, Tae-Woo; Yoon, Yong-Hoon; Shin, Kyung-Seok; Yoo, Seung-Won

    2011-01-01

    Objectives The purpose of this retrospective cohort study was to investigate the relationship between exposure of Korean workers to petrochemicals in the refinery/petrochemical industry and lymphohematopoietic cancers. Methods The cohort consisted of 8,866 male workers who had worked from the 1960s to 2007 at one refinery and six petrochemical companies located in a refinery/petrochemical complex in Korea that produce benzene or use benzene as a raw material. Standardized mortality ratios (SMRs) and standardized incidence ratios (SIRs) were calculated for 1992-2007 and 1997-2005 based on the death rate and cancer incidence rate of the Korean male population according to job title (production, maintenance, laboratory, and office workers). Results The overall mortality and most cause-specific mortalities were lower among these workers than those of the general Korean population. Increased SMRs were observed for leukemia (4/1.45; SMR 2.77, 95% CI: 0.75-7.09) and lymphohematopoietic cancers (5/2.51; SMR 2, 95% CI: 0.65-4.66) in production workers, and increased SIRs were also observed in leukemia (3/1.34; SIR 2.24, 95% CI: 0.46-6.54) and lymphohematopoietic cancers (5/3.39; SIR 1.47, 95% CI: 0.48-3.44) in production workers, but the results were not statistically significant. Conclusion The results showed a potential relationship between leukemia and lymphohematopoietic cancers and exposure to benzene in refinery/petrochemical complex workers. This study yielded limited results due to a short observational period; therefore, a follow-up study must be performed to elucidate the relationship between petrochemical exposure and cancer rates. PMID:22953184

  9. Lymphohematopoietic cancer mortality and morbidity of workers in a refinery/petrochemical complex in Korea.

    PubMed

    Koh, Dong-Hee; Kim, Tae-Woo; Yoon, Yong-Hoon; Shin, Kyung-Seok; Yoo, Seung-Won

    2011-03-01

    The purpose of this retrospective cohort study was to investigate the relationship between exposure of Korean workers to petrochemicals in the refinery/petrochemical industry and lymphohematopoietic cancers. The cohort consisted of 8,866 male workers who had worked from the 1960s to 2007 at one refinery and six petrochemical companies located in a refinery/petrochemical complex in Korea that produce benzene or use benzene as a raw material. Standardized mortality ratios (SMRs) and standardized incidence ratios (SIRs) were calculated for 1992-2007 and 1997-2005 based on the death rate and cancer incidence rate of the Korean male population according to job title (production, maintenance, laboratory, and office workers). The overall mortality and most cause-specific mortalities were lower among these workers than those of the general Korean population. Increased SMRs were observed for leukemia (4/1.45; SMR 2.77, 95% CI: 0.75-7.09) and lymphohematopoietic cancers (5/2.51; SMR 2, 95% CI: 0.65-4.66) in production workers, and increased SIRs were also observed in leukemia (3/1.34; SIR 2.24, 95% CI: 0.46-6.54) and lymphohematopoietic cancers (5/3.39; SIR 1.47, 95% CI: 0.48-3.44) in production workers, but the results were not statistically significant. The results showed a potential relationship between leukemia and lymphohematopoietic cancers and exposure to benzene in refinery/petrochemical complex workers. This study yielded limited results due to a short observational period; therefore, a follow-up study must be performed to elucidate the relationship between petrochemical exposure and cancer rates.

  10. Occupational exposure to benzene at the ExxonMobil refinery in Baytown, TX (1978-2006).

    PubMed

    Gaffney, Shannon H; Panko, Julie M; Unice, Ken M; Burns, Amanda M; Kreider, Marisa L; Gelatt, Richard H; Booher, Lindsay E; Paustenbach, Dennis J

    2011-01-01

    Although occupational benzene exposure of refinery workers has been studied for decades, no extensive analysis of historical industrial hygiene data has been performed focusing on airborne concentrations at specific refineries and tasks. This study characterizes benzene exposures at the ExxonMobil Baytown, TX, refinery from 1978 to 2006 to understand the variability in workers' exposures over time and during different job tasks. Exposures were grouped by operational status, job title, and tasks. More than 9000 industrial hygiene air samples were evaluated; approximately 4000 non-task (> 3 h) and 1000 task-related (< 3 h) personal samples were considered. Each sample was assigned to one of 27 job titles, 29 work areas, and 16 task bins (when applicable). Process technicians were sampled most frequently, resulting in the following mean benzene concentrations by area: hydrofiner (n=245, mean=1.3 p.p.m.), oil movements (n=286, mean=0.23 p.p.m.), reformer (n=575, mean=0.10 p.p.m.), tank farm (n=9, mean=0.65 p.p.m.), waste treatment (n=446, mean=0.13 p.p.m.), and other areas (n=460, mean=0.062 p.p.m.). The most frequently sampled task was sample collection (n=218, mean=0.40 p.p.m.). Job title and area did not significantly impact task-related exposures. Airborne concentrations were significantly lower after 1990 than before 1990. Results of this task-focused study may be useful when analyzing benzene exposures at other refineries.

  11. Using lanthanoid elements as tracers for anthropogenic contamination of atmospheric aerosols

    NASA Astrophysics Data System (ADS)

    Moreno, T.; Querol, X.; Alastuey, A.; Gibbons, W.

    2009-04-01

    Lanthanoid elements are present in atmospheric particulate matter both within natural mineral particles and as anthropogenic aerosols emitted from industrial and traffic pollution sources. Whereas the total lanthanoid (ΣLoid) content of atmospheric PM is controlled primarily by the amount of coarse crustal mineral material present, ratios between different lanthanoid elements (e.g. La/Ce and La/Sm) can be influenced by industrial processes such as the use of La-enriched fluid catalytic converters (FCC) in oil refineries, the combustion of refinery La-contaminated oils in power stations, or the abrasive loss of Ce-bearing PM from road vehicle catalytic converters. Use of lanthanoid ratios as tracers are especially useful in allowing the identification of specific La anomalies (La>Ce) when FCC refinery emissions are prominent. Increasing contamination of urban/industrial atmospheric PM samples away from crustal compositions may be tracked using a LaCeSm triangular plot, but this does not differentiate between FCC refinery and oil combustion emissions. Comparing lanthanoid and V concentrations does aid such differentiation, although given the likelihood of multiple PM sources in industrial locations, we recommend use of a LaCeV plot rather than simply La/V ratios. Lanthanoid geochemistry can be applied in this way to demonstrate for example how atmospheric PM in many urban areas is polluted more by V-bearing fuel oil combustion (e.g. Mexico City), whereas other cities are more influenced by different aerosol sources such as oil refineries (e.g. Houston) or coal burning (e.g. Beijing). This work was funded by the Spanish Ministry of Science and Innovation (GRACCIE-SCD2007-00067).

  12. Microbial community succession in alkaline, saline bauxite residue: a cross-refinery study

    NASA Astrophysics Data System (ADS)

    Santini, T.; Malcolm, L. I.; Tyson, G. W.; Warren, L. A.

    2015-12-01

    Bauxite residue, a byproduct of the Bayer process for alumina refining, is an alkaline, saline tailings material that is generally considered to be inhospitable to microbial life. In situ remediation strategies promote soil formation in bauxite residue by enhancing leaching of saline, alkaline pore water, and through incorporation of amendments to boost organic matter content, decrease pH, and improve physical structure. The amelioration of chemical and physical conditions in bauxite residue is assumed to support diversification of microbial communities from narrow, poorly functioning microbial communities towards diverse, well-functioning communities. This study aimed to characterise microbial communities in fresh and remediated bauxite residues from refineries worldwide, to identify (a) whether initial microbial communities differed between refineries; (b) major environmental controls on microbial community composition; and (c) whether remediation successfully shifts the composition of microbial communities in bauxite residue towards those found in reference (desired endpoint) soils. Samples were collected from 16 refineries and characterised using 16S amplicon sequencing to examine microbial community composition and structure, in conjunction with physicochemical analyses. Initial microbial community composition was similar across refineries but partitioned into two major groups. Microbial community composition changes slowly over time and indicates that alkalinity and salinity inhibit diversification. Microbially-based strategies for in situ remediation should consider the initial microbial community composition and whether the pre-treatment of chemical properties would optimise subsequent bioremediation outcomes. During in situ remediation, microbial communities become more diverse and develop wider functional capacity, indicating progression towards communities more commonly observed in natural grassland and forest soils.

  13. 19 CFR Appendix to Part 146 - Guidelines for Determining Producibility and Relative Values for Oil Refinery Zones

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Producibility Showing Manufacturing Periods From Admission t o Removal Within a Calender Month. Volume losses and gains accounted for by weight. Day 1 Receipt into the refinery subzone during a 30-day month: 50... 50,000 pounds of aviation gasoline. The period of manufacture for the aviation gasoline is Day 1 to...

  14. 19 CFR Appendix to Part 146 - Guidelines for Determining Producibility and Relative Values for Oil Refinery Zones

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Producibility Showing Manufacturing Periods From Admission t o Removal Within a Calender Month. Volume losses and gains accounted for by weight. Day 1 Receipt into the refinery subzone during a 30-day month: 50... 50,000 pounds of aviation gasoline. The period of manufacture for the aviation gasoline is Day 1 to...

  15. 19 CFR Appendix to Part 146 - Guidelines for Determining Producibility and Relative Values for Oil Refinery Zones

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Producibility Showing Manufacturing Periods From Admission to Removal Within a Calendar Month. Volume losses and gains accounted for by weight. Day 1 Receipt into the refinery subzone during a 30-day month: 50,000... pounds of aviation gasoline. The period of manufacture for the aviation gasoline is Day 1 to Day 10. The...

  16. 40 CFR 421.324 - Standards of performance for new sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .../kg (pounds per million pounds) of uranium processed in the refinery Chromium (total) 27.14 11.00... average mg/kg (pounds per million pounds) of uranium processed in the refinery Chromium (total) 1.689 0... Chromium (total) 2.357 0.955 Copper 8.152 3.885 Nickel 3.503 2.357 Fluoride 222.900 126.700 Total suspended...

  17. 40 CFR 421.324 - Standards of performance for new sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .../kg (pounds per million pounds) of uranium processed in the refinery Chromium (total) 27.14 11.00... average mg/kg (pounds per million pounds) of uranium processed in the refinery Chromium (total) 1.689 0... Chromium (total) 2.357 0.955 Copper 8.152 3.885 Nickel 3.503 2.357 Fluoride 222.900 126.700 Total suspended...

  18. 40 CFR 80.1363 - What are the additional requirements under this subpart for gasoline produced at foreign refineries?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false What are the additional requirements... January 1, 2004 through December 31, 2005, and any work papers related to refinery baseline establishment... this subpart, including conduct that violates the False Statements Accountability Act of 1996 (18 U.S.C...

  19. 40 CFR 80.1363 - What are the additional requirements under this subpart for gasoline produced at foreign refineries?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false What are the additional requirements... January 1, 2004 through December 31, 2005, and any work papers related to refinery baseline establishment... this subpart, including conduct that violates the False Statements Accountability Act of 1996 (18 U.S.C...

  20. 40 CFR 80.1363 - What are the additional requirements under this subpart for gasoline produced at foreign refineries?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false What are the additional requirements... January 1, 2004 through December 31, 2005, and any work papers related to refinery baseline establishment... this subpart, including conduct that violates the False Statements Accountability Act of 1996 (18 U.S.C...

  1. 40 CFR 80.1363 - What are the additional requirements under this subpart for gasoline produced at foreign refineries?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false What are the additional requirements... January 1, 2004 through December 31, 2005, and any work papers related to refinery baseline establishment... this subpart, including conduct that violates the False Statements Accountability Act of 1996 (18 U.S.C...

  2. 40 CFR 80.1363 - What are the additional requirements under this subpart for gasoline produced at foreign refineries?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false What are the additional requirements... January 1, 2004 through December 31, 2005, and any work papers related to refinery baseline establishment... this subpart, including conduct that violates the False Statements Accountability Act of 1996 (18 U.S.C...

  3. 40 CFR 80.1335 - Can a refiner seek relief from the requirements of this subpart?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... efforts to obtain capital for refinery investments; (H) Bond rating of entity that owns the refinery; and (I) Estimated capital investment needed to comply with the requirements of this subpart. (iii) For a... capital, and a detailed estimate of when the requirements of § 80.1230(a) or (b), as applicable, will be...

  4. 40 CFR 80.524 - What sulfur content standard applies to motor vehicle diesel fuel downstream of the refinery or...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... to motor vehicle diesel fuel downstream of the refinery or importer? 80.524 Section 80.524 Protection... FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80.524 What sulfur content standard...

  5. 40 CFR 80.524 - What sulfur content standard applies to motor vehicle diesel fuel downstream of the refinery or...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to motor vehicle diesel fuel downstream of the refinery or importer? 80.524 Section 80.524 Protection... FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80.524 What sulfur content standard...

  6. 40 CFR 80.1030 - What are the requirements for gasoline produced at foreign refineries having individual refiner...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... engagement for each foreign refinery under § 80.1035: (1) The inventory reconciliation analysis under § 80... subject of the attest engagement, and whether the Certified Toxics-FRGAS was mixed with any Non-Certified... may be by EPA employees or contractors to EPA. (iv) Any documents requested that are related to...

  7. 40 CFR 80.1030 - What are the requirements for gasoline produced at foreign refineries having individual refiner...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... engagement for each foreign refinery under § 80.1035: (1) The inventory reconciliation analysis under § 80... subject of the attest engagement, and whether the Certified Toxics-FRGAS was mixed with any Non-Certified... may be by EPA employees or contractors to EPA. (iv) Any documents requested that are related to...

  8. Refinery siting workbook: appendices C to O

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    Applicable laws and permits available for the selection and building of petroleum refineries are enclosed. A glossary of pertinent terms is also included. References related to the National Environmental Policy Act, the Clean Air Act, the Federal Water Pollution Control Act, Resource Conservation and Recovery Act, Toxic Substance Control Act, and Wetlands and Coastal Zone are included. Permit information is also presented. (DC)

  9. 40 CFR 63.7545 - What notifications must I submit and when?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... materials within the meaning of § 241.3, and justification for the selection of fuel(s) burned during the... designed to burn natural gas, refinery gas, or other gas 1 fuels that is subject to this subpart, and you intend to use a fuel other than natural gas, refinery gas, or other gas 1 fuel to fire the affected unit...

  10. Seasonal variations on sugarcane trash quantity and quality that directly concern factory processors and refiners

    USDA-ARS?s Scientific Manuscript database

    In sugar manufacture, there is a trend in the United States and worldwide to produce very high purity (VHP) and very low color (VLC) raw sugars for vertical integration from the field to the refinery. New refineries in Louisiana (LA) are expected to be operational in the next few years. One of thes...

  11. Model for refining operations

    NASA Technical Reports Server (NTRS)

    Dunbar, D. N.; Tunnah, B. G.

    1979-01-01

    Program predicts production volumes of petroleum refinery products, with particular emphasis on aircraft-turbine fuel blends and their key properties. It calculates capital and operating costs for refinery and its margin of profitability. Program also includes provisions for processing of synthetic crude oils from oil shale and coal liquefaction processes and contains highly-detailed blending computations for alternative jet-fuel blends of varying endpoint specifications.

  12. 75 FR 60632 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste; Direct Final Rule

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-01

    ... action is EPA approving? B. Why is EPA approving this delisting? C. How will Beaumont Refinery manage the wastes, if it is delisted? D. When would the delisting exclusion be finalized? E. How would this action... petition? D. What were the results of Beaumont Refinery's analysis? E. How did EPA evaluate the risk of...

  13. Ultrasonic oil recovery and salt removal from refinery tank bottom sludge.

    PubMed

    Hu, Guangji; Li, Jianbing; Thring, Ronald W; Arocena, Joselito

    2014-01-01

    The oil recovery and salt removal effects of ultrasonic irradiation on oil refinery tank bottom sludge were investigated, together with those of direct heating. Ultrasonic power, treatment duration, sludge-to-water ratio, and initial sludge-water slurry temperature were examined for their impacts on sludge treatment. It was found that the increased initial slurry temperature could enhance the ultrasonic irradiation performance, especially at lower ultrasonic power level (i.e., 21 W), but the application of higher-power ultrasound could rapidly increase the bulk temperature of slurry. Ultrasonic irradiation had a better oil recovery and salt removal performance than direct heating treatment. More than 60% of PHCs in the sludge was recovered at an ultrasonic power of 75 W, a treatment duration of 6 min, an initial slurry temperature of 25°C, and a sludge-to-water ratio of 1:4, while salt content in the recovered oil was reduced to <5 mg L(-1), thereby satisfying the salt requirement in refinery feedstock oil. In general, ultrasonic irradiation could be an effective method in terms of oil recovery and salt removal from refinery oily sludge, but the separated wastewater still contains relatively high concentrations of PHCs and salt which requires proper treatment.

  14. Determinants of blood lead levels in an adult population from a mining area in Brazil

    NASA Astrophysics Data System (ADS)

    Bastos Paoliello, M. M.; Mello de Capitani, E.; Gonçalves da Cunha, F.; Carvalho, M. De Fatima; Matsuo, T.; Sakuma, A.; Ribeiro Figueiredo, B.

    2003-05-01

    During the last fifty year the Ribeira river valley, Brazil, had been under the influence of the full activity of a huge lead refinery and mining along the riverside. The plant completely stopped all kind of industrial activities at the end of 1995, and part of the worker population and their families still remain living nearby in smal communities. The objective of the present study was to assess the deterninants of blood lead levels (BLL) in these nining areas, where residual environmental contamination from the past industrial activity still remains. Blood samples of 350 adults aged 15 to 70, residing in areas around the mine and the refinery were collected. A questionnaire was given in order to gather information on food habits, current and former residential places occupationnal activities, among other variables. Blood lead concentrations were analysed by graphite furnace atomic absorption spectrometry using Zeeman background correction. Logistic regression analysis was conducted to examine the independent contribution of selected variables in predicting BLL in those subjects. The following variables showed significant association with high BLL: residential area close to the lead refinery, former dwelling at the refinery village, male gender, smoking habits, and consume of fruits from home back yard.

  15. Electricity generation and wastewater treatment of oil refinery in microbial fuel cells using Pseudomonas putida.

    PubMed

    Majumder, Dip; Maity, Jyoti Prakash; Tseng, Min-Jen; Nimje, Vanita Roshan; Chen, Hau-Ren; Chen, Chien-Cheng; Chang, Young-Fo; Yang, Tsui-Chu; Chen, Chen-Yen

    2014-09-22

    Microbial fuel cells (MFCs) represent a novel platform for treating wastewater and at the same time generating electricity. Using Pseudomonas putida (BCRC 1059), a wild-type bacterium, we demonstrated that the refinery wastewater could be treated and also generate electric current in an air-cathode chamber over four-batch cycles for 63 cumulative days. Our study indicated that the oil refinery wastewater containing 2213 mg/L (ppm) chemical oxygen demand (COD) could be used as a substrate for electricity generation in the reactor of the MFC. A maximum voltage of 355 mV was obtained with the highest power density of 0.005 mW/cm² in the third cycle with a maximum current density of 0.015 mA/cm² in regard to the external resistor of 1000 Ω. A maximum coulombic efficiency of 6 × 10⁻²% was obtained in the fourth cycle. The removal efficiency of the COD reached 30% as a function of time. Electron transfer mechanism was studied using cyclic voltammetry, which indicated the presence of a soluble electron shuttle in the reactor. Our study demonstrated that oil refinery wastewater could be used as a substrate for electricity generation.

  16. Platinum salt sensitivity in refinery workers: incidence and effects of smoking and exposure.

    PubMed Central

    Calverley, A E; Rees, D; Dowdeswell, R J; Linnett, P J; Kielkowski, D

    1995-01-01

    OBJECTIVE--To measure the incidence of platinum salt sensitivity (PSS) in refinery workers and examine the influence of cigarette smoking and exposure to platinum salts on sensitisation. DESIGN--A prospective cohort study with examination of workers at quarterly intervals for 18 months, and again at 24 months. SETTING--A South African primary platinum refinery. SUBJECTS--78 new recruits, selected by the refinery's usual procedure, without apparent atopy and in good respiratory health. RESULTS--After 24 months 32 (41%) subjects had been diagnosed PSS and were subsequently medically separated. Twenty two (28%) cases were confirmed by positive skin prick test to platinum salts, 10 (13%) cases were symptomatic but skin prick negative. Incidence of cases per 100 person-months was 1.9 skin prick positive and 0.8 negative. Risk of sensitisation was about eight times greater for smokers than non-smokers, and six times greater for high exposure than low exposure. CONCLUSION--Smoking and intensity of exposure were definitely associated with development of PSS. Positive responses to platinum salt skin prick test had a 100% positive predictive value for symptoms and signs of PSS if exposure continued. PMID:7489056

  17. Who lives near coke plants and oil refineries An exploration of the environmental inequity hypothesis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Graham, J.D.; Beaulieu, N.D.; Sussman, D.

    1999-04-01

    Facility-specific information on pollution was obtained for 36 coke plants and 46 oil refineries in the US and matched with information on populations surrounding these 82 facilities. These data were analyzed to determine whether environmental inequities were present, whether they were more economic or racial in nature, and whether the racial composition of nearby communities has changed significantly since plants began operations. The Census tracts near coke plants have a disproportionate share of poor and nonwhite residents. Multivariate analyses suggest that existing inequities are primarily economic in nature. The findings for oil refineries are not strongly supportive of the environmentalmore » inequity hypothesis. Rank ordering of facilities by race, poverty, and pollution produces limited (although not consistent) evidence that the more risky facilities tend to be operating in communities with above-median proportions of nonwhite residents (near coke plants) and Hispanic residents (near oil refineries). Over time, the radical makeup of many communities near facilities has changed significantly, particularly in the case of coke plants sited in the early 1900s. Further risk-oriented studies of multiple manufacturing facilities in various industrial sectors of the economy are recommended.« less

  18. Electricity Generation and Wastewater Treatment of Oil Refinery in Microbial Fuel Cells Using Pseudomonas putida

    PubMed Central

    Majumder, Dip; Maity, Jyoti Prakash; Tseng, Min-Jen; Nimje, Vanita Roshan; Chen, Hau-Ren; Chen, Chien-Cheng; Chang, Young-Fo; Yang, Tsui-Chu; Chen, Chen-Yen

    2014-01-01

    Microbial fuel cells (MFCs) represent a novel platform for treating wastewater and at the same time generating electricity. Using Pseudomonas putida (BCRC 1059), a wild-type bacterium, we demonstrated that the refinery wastewater could be treated and also generate electric current in an air-cathode chamber over four-batch cycles for 63 cumulative days. Our study indicated that the oil refinery wastewater containing 2213 mg/L (ppm) chemical oxygen demand (COD) could be used as a substrate for electricity generation in the reactor of the MFC. A maximum voltage of 355 mV was obtained with the highest power density of 0.005 mW/cm2 in the third cycle with a maximum current density of 0.015 mA/cm2 in regard to the external resistor of 1000 Ω. A maximum coulombic efficiency of 6 × 10−2% was obtained in the fourth cycle. The removal efficiency of the COD reached 30% as a function of time. Electron transfer mechanism was studied using cyclic voltammetry, which indicated the presence of a soluble electron shuttle in the reactor. Our study demonstrated that oil refinery wastewater could be used as a substrate for electricity generation. PMID:25247576

  19. Responses of buried corrugated metal pipes to earthquakes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Davis, C.A.; Bardet, J.P.

    2000-01-01

    This study describes the results of field investigations and analyses carried out on 61 corrugated metal pipes (CMP) that were shaken by the 1994 Northridge earthquake. These CMPs, which include 29 small-diameter (below 107 cm) CMPs and 32 large-diameter (above 107 cm) CMPs, are located within a 10 km{sup 2} area encompassing the Van Normal Complex in the Northern San Fernando Valley, in Los Angeles, California. During the Northridge earthquake, ground movements were extensively recorded within the study area. Twenty-eight of the small-diameter CMPs performed well while the 32 large-diameter CMPs underwent performances ranging from no damage to complete collapse.more » The main cause of damage to the large-diameter CMPs was found to be the large ground strains. Based on this unprecedented data set, the factors controlling the seismic performance of the 32 large-diameter CMPs were identified and framed into a pseudostatic analysis method for evaluating the response of large diameter flexible underground pipes subjected to ground strain. The proposed analysis, which is applicable to transient and permanent strains, is capable of describing the observed performance of large-diameter CMPs during the 1994 Northridge earthquake. It indicates that peak ground velocity is a more reliable parameter for analyzing pipe damage than is peak ground acceleration. Results of this field investigation and analysis are useful for the seismic design and strengthening of flexible buried conduits.« less

  20. Statoil-Himont outlines Antwerp operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-05-04

    Norway's Den morske Stats Oljeselskap AS, the North Sea's largest oil producer, and Himont Inc., the world's largest producer of polypropylene, believe their joint venture complex near Antwerp has changed the traditional structure of the petrochemical industry. At a briefing and press conference, executives from the two companies and their new joint venture, North Sea Petrochemicals, covered their venture and its first 2 months of operation and presented their outlook for the polypropylene market. Statoil stressed its intent to expand petrochemical operations in Europe. The company supplies the complex with all the propane feed and refinery grade propylene its uses.more » The propane comes from Statoil's offshore production, the imported refinery grade propylene from Statoil's Mongstad, Norway, refinery. This paper describes the propylene production process used in Antwerp.« less

  1. Petroleum refinery operational planning using robust optimization

    NASA Astrophysics Data System (ADS)

    Leiras, A.; Hamacher, S.; Elkamel, A.

    2010-12-01

    In this article, the robust optimization methodology is applied to deal with uncertainties in the prices of saleable products, operating costs, product demand, and product yield in the context of refinery operational planning. A numerical study demonstrates the effectiveness of the proposed robust approach. The benefits of incorporating uncertainty in the different model parameters were evaluated in terms of the cost of ignoring uncertainty in the problem. The calculations suggest that this benefit is equivalent to 7.47% of the deterministic solution value, which indicates that the robust model may offer advantages to those involved with refinery operational planning. In addition, the probability bounds of constraint violation are calculated to help the decision-maker adopt a more appropriate parameter to control robustness and judge the tradeoff between conservatism and total profit.

  2. High pressure fiber optic sensor system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guida, Renato; Xia, Hua; Lee, Boon K

    2013-11-26

    The present application provides a fiber optic sensor system. The fiber optic sensor system may include a small diameter bellows, a large diameter bellows, and a fiber optic pressure sensor attached to the small diameter bellows. Contraction of the large diameter bellows under an applied pressure may cause the small diameter bellows to expand such that the fiber optic pressure sensor may measure the applied pressure.

  3. Inventory-based sensitivity analysis of the Large Tree Diameter Growth Submodel of the Southern Variant of the FVS

    Treesearch

    Giorgio Vacchiano; John D. Shaw; R. Justin DeRose; James N. Long

    2008-01-01

    Diameter increment is an important variable in modeling tree growth. Most facets of predicted tree development are dependent in part on diameter or diameter increment, the most commonly measured stand variable. The behavior of the Forest Vegetation Simulator (FVS) largely relies on the performance of the diameter increment model and the subsequent use of predicted dbh...

  4. Superfund record of decision amendment (EPA Region 5): Arrowhead Refinery Company, Hermantown, MN, February 9, 1994

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This decision document amends the selected remedial action for the Arrowhead Refinery Superfund Site (Arrowhead). This AROD does not make `fundamental changes` to the groundwater remedy selected in the ROD. Therefore, this AROD does not constitute an amendment of the groundwater remedy. However, this AROD does document minor differences in the groundwater remedy which the Agency intends to implement.

  5. Evaluation of adsorbent and ion exchange resins for removal of organic matter from petroleum refinery wastewaters aiming to increase water reuse.

    PubMed

    de Abreu Domingos, Rodrigo; da Fonseca, Fabiana Valéria

    2018-05-15

    The oil refinery industry seeks solutions to reduce its water uptake and consumption by encouraging the reuse of internal streams and wastewater from treatment systems. After conventional treatment the petroleum refinery wastewater still contains a considerable quantity of recalcitrant organics and the adsorption on activated carbon is currently used in Brazilian refineries, although it is still expensive due to the difficulty of its regeneration. This study evaluated the use of adsorbent and ion exchange resins for the removal of organic matter from refinery wastewater after conventional treatment in order to verify its feasibility, applying successive resin regenerations and comparing the results with those obtained for activated carbon process. Adsorption isotherms experiments were used to evaluate commercial resins, and the most efficient was subjected to column experiments, where absorbance (ABS) and total organic carbon (TOC) removal were measured. The adsorption isotherm of the best resin showed an adsorptive capacity that was 55% lower than that of activated carbon. On the other hand, the column experiments indicated good removal efficiency, and the amount of TOC in the treated wastewater was as good as has been reported in the literature for activated carbon. The regeneration efficiency of the retained organics ranged from 57 to 94%, while regenerant consumption ranged from 12 to 79% above the amount recommended by the resin supplier for the removal of organic material from natural sources, showing the great resistance of these recalcitrant compounds to desorption. Finally, an estimate of the service life of the resin using intermediate regeneration conditions found it to be seven times higher than that of activated carbon when the latter is not regenerated. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Airborne concentrations of metals and total dust during solid catalyst loading and unloading operations at a petroleum refinery.

    PubMed

    Lewis, Ryan C; Gaffney, Shannon H; Le, Matthew H; Unice, Ken M; Paustenbach, Dennis J

    2012-09-01

    Workers handle catalysts extensively at petroleum refineries throughout the world each year; however, little information is available regarding the airborne concentrations and plausible exposures during this type of work. In this paper, we evaluated the airborne concentrations of 15 metals and total dust generated during solid catalyst loading and unloading operations at one of the largest petroleum refineries in the world using historical industrial hygiene samples collected between 1989 and 2006. The total dust and metals, which included aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, molybdenum, nickel, platinum, silicon, silver, vanadium, and zinc, were evaluated in relation to the handling of four different types of solid catalysts associated with three major types of catalytic processes. Consideration was given to the known components of the solid catalysts and any metals that were likely deposited onto them during use. A total of 180 analytical results were included in this analysis, representing 13 personal and 54 area samples. Of the long-term personal samples, airborne concentrations of metals ranged from <0.001 to 2.9mg/m(3), and, in all but one case, resulted in concentrations below the current U.S. Occupational Safety and Health Administration's Permissible Exposure Limits and the American Conference of Governmental Industrial Hygienists' Threshold Limit Values. The arithmetic mean total dust concentration resulting from long-term personal samples was 0.31mg/m(3). The data presented here are the most complete set of its kind in the open literature, and are useful for understanding the potential exposures during solid catalyst handling activities at this petroleum refinery and perhaps other modern refineries during the timeframe examined. Copyright © 2011 Elsevier GmbH. All rights reserved.

  7. Classification of diesel pool refinery streams through near infrared spectroscopy and support vector machines using C-SVC and ν-SVC.

    PubMed

    Alves, Julio Cesar L; Henriques, Claudete B; Poppi, Ronei J

    2014-01-03

    The use of near infrared (NIR) spectroscopy combined with chemometric methods have been widely used in petroleum and petrochemical industry and provides suitable methods for process control and quality control. The algorithm support vector machines (SVM) has demonstrated to be a powerful chemometric tool for development of classification models due to its ability to nonlinear modeling and with high generalization capability and these characteristics can be especially important for treating near infrared (NIR) spectroscopy data of complex mixtures such as petroleum refinery streams. In this work, a study on the performance of the support vector machines algorithm for classification was carried out, using C-SVC and ν-SVC, applied to near infrared (NIR) spectroscopy data of different types of streams that make up the diesel pool in a petroleum refinery: light gas oil, heavy gas oil, hydrotreated diesel, kerosene, heavy naphtha and external diesel. In addition to these six streams, the diesel final blend produced in the refinery was added to complete the data set. C-SVC and ν-SVC classification models with 2, 4, 6 and 7 classes were developed for comparison between its results and also for comparison with the soft independent modeling of class analogy (SIMCA) models results. It is demonstrated the superior performance of SVC models especially using ν-SVC for development of classification models for 6 and 7 classes leading to an improvement of sensitivity on validation sample sets of 24% and 15%, respectively, when compared to SIMCA models, providing better identification of chemical compositions of different diesel pool refinery streams. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. Kidney cancer and hydrocarbon exposures among petroleum refinery workers.

    PubMed

    Poole, C; Dreyer, N A; Satterfield, M H; Levin, L; Rothman, K J

    1993-12-01

    To evaluate the hypothesis of increased kidney cancer risk after exposure to hydrocarbons, especially those present in gasoline, we conducted a case-control study in a cohort of approximately 100,000 male refinery workers from five petroleum companies. A review of 18,323 death certificates identified 102 kidney cancer cases, to each of whom four controls were matched by refinery location and decade of birth. Work histories, containing an average of 15.7 job assignments per subject, were found for 98% of the cases and 94% of the controls. To each job, industrial hygienists assigned semiquantitative ratings for the intensity and frequency of exposures to three hydrocarbon categories: nonaromatic liquid gasoline distillates, aromatic hydrocarbons, and the more volatile hydrocarbons. Ratings of "present" or "absent" were assigned for seven additional exposures: higher boiling hydrocarbons, polynuclear aromatic hydrocarbons, asbestos, chlorinated solvents, ionizing radiation, and lead. Each exposure had either no association or a weak association with kidney cancer. For the hydrocarbon category of principal a priori interest, the nonaromatic liquid gasoline distillates, the estimated relative risk (RR) for any exposure above refinery background was 1.0 (95% confidence interval [CI] 0.5-1.9). Analyses of cumulative exposures and of exposures in varying time periods before kidney cancer occurrence also produced null or near-null results. In an analysis of the longest job held by each subject (average duration 9.2 years or 40% of the refinery work history), three groups appeared to be at increased risk: laborers (RR = 1.9, 95% CI 1.0-3.9); workers in receipt, storage, and movements (RR = 2.5, 95% CI 0.9-6.6); and unit cleaners (RR = 2.3, 95% CI 0.5-9.9).

  9. Risk assessment of occupational exposure to benzene using numerical simulation in a complex geometry of a reforming unit of petroleum refinery.

    PubMed

    Bayatian, Majid; Ashrafi, Khosro; Azari, Mansour Rezazadeh; Jafari, Mohammad Javad; Mehrabi, Yadollah

    2018-04-01

    There has been an increasing concern about the continuous and the sudden release of volatile organic pollutants from petroleum refineries and occupational and environmental exposures. Benzene is one of the most prevalent volatile compounds, and it has been addressed by many authors for its potential toxicity in occupational and environmental settings. Due to the complexities of sampling and analysis of benzene in routine and accidental situations, a reliable estimation of the benzene concentration in the outdoor setting of refinery using a computational fluid dynamics (CFD) could be instrumental for risk assessment of occupational exposure. In the present work, a computational fluid dynamic model was applied for exposure risk assessment with consideration of benzene being released continuously from a reforming unit of a refinery. For simulation of benzene dispersion, GAMBIT, FLUENT, and CFD post software are used as preprocessing, processing, and post-processing, respectively. Computational fluid dynamic validation was carried out by comparing the computed data with the experimental measurements. Eventually, chronic daily intake and lifetime cancer risk for routine operations through the two seasons of a year are estimated through the simulation model. Root mean square errors are 0.19 and 0.17 for wind speed and concentration, respectively. Lifetime risk assessments of workers are 0.4-3.8 and 0.0096-0.25 per 1000 workers in stable and unstable atmospheric conditions, respectively. Exposure risk is unacceptable for the head of shift work, chief engineer, and general workers in 141 days (38.77%) in a year. The results of this study show that computational fluid dynamics is a useful tool for modeling of benzene exposure in a complex geometry and can be used to estimate lifetime risks of occupation groups in a refinery setting.

  10. Optimal Renewable Energy Integration into Refinery with CO2 Emissions Consideration: An Economic Feasibility Study

    NASA Astrophysics Data System (ADS)

    Alnifro, M.; Taqvi, S. T.; Ahmad, M. S.; Bensaida, K.; Elkamel, A.

    2017-08-01

    With increasing global energy demand and declining energy return on energy invested (EROEI) of crude oil, global energy consumption by the O&G industry has increased drastically over the past few years. In addition, this energy increase has led to an increase GHG emissions, resulting in adverse environmental effects. On the other hand, electricity generation through renewable resources have become relatively cost competitive to fossil based energy sources in a much ‘cleaner’ way. In this study, renewable energy is integrated optimally into a refinery considering costs and CO2 emissions. Using Aspen HYSYS, a refinery in the Middle East was simulated to estimate the energy demand by different processing units. An LP problem was formulated based on existing solar energy systems and wind potential in the region. The multi-objective function, minimizing cost as well as CO2 emissions, was solved using GAMS to determine optimal energy distribution from each energy source to units within the refinery. Additionally, an economic feasibility study was carried out to determine the viability of renewable energy technology project implementation to overcome energy requirement of the refinery. Electricity generation through all renewable energy sources considered (i.e. solar PV, solar CSP and wind) were found feasible based on their low levelized cost of electricity (LCOE). The payback period for a Solar CSP project, with an annual capacity of about 411 GWh and a lifetime of 30 years, was found to be 10 years. In contrast, the payback period for Solar PV and Wind were calculated to be 7 and 6 years, respectively. This opens up possibilities for integrating renewables into the refining sector as well as optimizing multiple energy carrier systems within the crude oil industry

  11. Exposure of children to lead and cadmium from a mining area of Brazil.

    PubMed

    Paoliello, Monica Maria Bastos; De Capitani, Eduardo Mello; da Cunha, Fernanda Gonçalves; Matsuo, Tiemi; Carvalho, Maria de Fátima; Sakuma, Alice; Figueiredo, Bernardino Ribeiro

    2002-02-01

    During the past 50 years the Ribeira river valley, in the southern part of the state of São Paulo, Brazil, had been under the influence of the full activity of a huge lead refinery and mine working by the side of the river. The plant completely stopped all kinds of industrial activities at the end of 1995, and part of the worker population and their families still remain living nearby in small communities. The objective of the study was to assess the exposure of children to lead and cadmium in these areas, where residual environmental contamination from the past industrial activity still exists. Blood samples of 295 children aged 7 to 14 years, residing in rural and urban areas around the mine and the refinery, were collected. A questionnaire was given to gather information on food habits, leisure activities, father's past employment, current and former residential places, and other variables. Blood lead and cadmium concentrations were analyzed by graphite furnace atomic absorption spectrometry using Zeeman background correction. Cadmium values obtained in this population were mostly below established quantification limits (0.5 microg/dl). The median of blood lead level (BLL) obtained in children living close to the lead refinery was 11.25 microg/dl, and the median in other mining regions far from the refinery was 4.4 microg/dl. Logistic regression analysis was conducted to examine the independent contribution of selected variables in predicting BLL in these children. The following variables showed significant association with high BLL: residential area close to the lead refinery [odds ratio (OR)=10.38 (95% confidence interval (Cl)=4.86-23.25)], former father's occupational lead exposure [OR=4.07 (95% Cl=1.82-9.24)], and male gender [OR=2.60 (95% Cl=1.24-5.62)].

  12. 75 FR 38989 - Welded Large Diameter Line Pipe From Japan: Notice of Rescission of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    ... Pipe From Japan: Notice of Rescission of Antidumping Duty Administrative Review AGENCY: Import... antidumping duty order on welded large diameter line pipe from Japan. The review covers 4 producers/exporters of welded large diameter line pipe from Japan, which are, JFE Steel Corporation, Nippon Steel...

  13. Purification of 1.9-nm-diameter semiconducting single-wall carbon nanotubes by temperature-controlled gel-column chromatography and its application to thin-film transistor devices

    NASA Astrophysics Data System (ADS)

    Thendie, Boanerges; Omachi, Haruka; Hirotani, Jun; Ohno, Yutaka; Miyata, Yasumitsu; Shinohara, Hisanori

    2017-06-01

    Large-diameter semiconductor single-wall carbon nanotubes (s-SWCNTs) have superior mobility and conductivity to small-diameter s-SWCNTs. However, the purification of s-SWCNTs with diameters larger than 1.6 nm by gel filtration has been difficult owing to the low selectivity of the conventional purification method in these large-diameter regions. We report a combination of temperature-controlled gel filtration and the gradient elution technique that we developed to enrich a high-purity s-SWCNT with a diameter as large as 1.9 nm. The thin-film transistor (TFT) device using the 1.9-nm-diameter SWCNT shows an average channel mobility of 23.7 cm2 V-1 s-1, which is much higher than those of conventional SWCNT-TFTs with smaller-diameters of 1.5 and 1.4 nm.

  14. Genotoxic evaluation of an industrial effluent from an oil refinery using plant and animal bioassays.

    PubMed

    Rodrigues, Fernando Postalli; Angeli, José Pedro Friedmann; Mantovani, Mário Sérgio; Guedes, Carmen Luisa Barbosa; Jordão, Berenice Quinzani

    2010-01-01

    Polycyclic aromatic hydrocarbons (PAHs) are genotoxic chemicals commonly found in effluents from oil refineries. Bioassays using plants and cells cultures can be employed for assessing environmental safety and potential genotoxicity. In this study, the genotoxic potential of an oil refinery effluent was analyzed by means of micronucleus (MN) testing of Alium cepa, which revealed no effect after 24 h of treatment. On the other hand, primary lesions in the DNA of rat (Rattus norvegicus) hepatoma cells (HTC) were observed through comet assaying after only 2 h of exposure. On considering the capacity to detect DNA damage of a different nature and of these cells to metabolize xenobiotics, we suggest the association of the two bioassays with these cell types, plant (Allium cepa) and mammal (HTC) cells, for more accurately assessing genotoxicity in environmental samples.

  15. Pemex to acquire interest in Shell Texas refinery

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-08-31

    This paper reports that Petroleos Mexicanos and Shell Oil Co. have signed a memorandum of understanding to form a joint refining venture involving Shell's 225,000 b/d Deer Park, Tex., refinery. Under the agreement, Mexico's state owned oil company is to purchase a 50% interest in the refinery, and Shell is to sell Pemex unleaded gasoline on a long term basis. Under the venture, Shell and Pemex plan to add undisclosed conversion and upgrading units tailored to process heavy Mexican crude. The revamp will allow Pemex to place more than 100,000 b/d of Mayan heavy crude on the U.S. market. Mayanmore » accounts for 70% of Mexico's crude oil exports. In turn, Shell will sell Pemex as much as 45,000 b/d of unleaded gasoline to help meet Mexico's rapidly growing demand.« less

  16. A preliminary cost analysis of the biotreatment of refinery spent-sulfidic caustic.

    PubMed

    Sublette, K L

    1997-01-01

    Caustics are used in petroleum refining to remove hydrogen sulfide from various hydrocarbon streams. Spent-sulfidic caustics from three refineries have been successfully biotreated on the bench and pilot scale, resulting in neutralization and removal of active Sulfides. Sulfides were completely oxidized to sulfate by Thiobacillus denitrificans strain F. Microbial oxidation of sulfide produced acid, which at least partially neutralized the caustic. A commercial-scale treatment system has been designed that features a bioreactor with a suspended culture of flocculated T. denitrificans, a settler and acid and nutrient storage and delivery systems. A cost analysis has been performed for nine cases representing a range of spent caustic sulfide and hydroxide concentrations at a base treatment rate of 10 gpm. This analysis shows that refinery spent-sulfidic caustic can be biotreated for 4-8.3 cent/gal.

  17. All fiber passively Q-switched laser

    DOEpatents

    Soh, Daniel B. S.; Bisson, Scott E

    2015-05-12

    Embodiments relate to an all fiber passively Q-switched laser. The laser includes a large core doped gain fiber having a first end. The large core doped gain fiber has a first core diameter. The laser includes a doped single mode fiber (saturable absorber) having a second core diameter that is smaller than the first core diameter. The laser includes a mode transformer positioned between a second end of the large core doped gain fiber and a first end of the single mode fiber. The mode transformer has a core diameter that transitions from the first core diameter to the second core diameter and filters out light modes not supported by the doped single mode fiber. The laser includes a laser cavity formed between a first reflector positioned adjacent the large core doped gain fiber and a second reflector positioned adjacent the doped single mode fiber.

  18. Selective control of small versus large diameter axons using infrared laser light (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Lothet, Emilie H.; Shaw, Kendrick M.; Horn, Charles C.; Lu, Hui; Wang, Yves T.; Jansen, E. Duco; Chiel, Hillel J.; Jenkins, Michael W.

    2016-03-01

    Sensory information is conveyed to the central nervous system via small diameter unmyelinated fibers. In general, smaller diameter axons have slower conduction velocities. Selective control of such fibers could create new clinical treatments for chronic pain, nausea in response to chemo-therapeutic agents, or hypertension. Electrical stimulation can control axonal activity, but induced axonal current is proportional to cross-sectional area, so that large diameter fibers are affected first. Physiologically, however, synaptic inputs generally affect small diameter fibers before large diameter fibers (the size principle). A more physiological modality that first affected small diameter fibers could have fewer side effects (e.g., not recruiting motor axons). A novel mathematical analysis of the cable equation demonstrates that the minimum length along the axon for inducing block scales with the square root of axon diameter. This implies that the minimum length along an axon for inhibition will scale as the square root of axon diameter, so that lower radiant exposures of infrared light will selectively affect small diameter, slower conducting fibers before those of large diameter. This prediction was tested in identified neurons from the marine mollusk Aplysia californica. Radiant exposure to block a neuron with a slower conduction velocity (B43) was consistently lower than that needed to block a faster conduction velocity neuron (B3). Furthermore, in the vagus nerve of the musk shrew, lower radiant exposure blocked slow conducting fibers before blocking faster conducting fibers. Infrared light can selectively control smaller diameter fibers, suggesting many novel clinical treatments.

  19. Iran Sanctions

    DTIC Science & Technology

    2010-02-02

    status. BP has told CRS in e-mail conversation in late 2009 that it is not selling gasoline to Iran. Petroleos de Venezuela reportedly reached a...might ignore a U.S. law, and possibly even a U.N. resolutions along these lines. Iran and Venezuela ( Petroleos de Venezuela S.A.) signed a gasoline...September 2009) Petroleos de Venezuela S.A.; 10% stake in venture $760 million Abadan refinery upgrade and expansion; building a new refinery

  20. Ace in the Hole: Fischer-Tropsch Fuels and National Security

    DTIC Science & Technology

    2010-05-24

    German might.”9 As the Allies’ strategic bombing campaign destroyed German refineries and choked imports from Rumanian refineries , Germany relied more...hydrocarbon structure.53 The 16 synthetic fuel contains no impurities, providing a superior aviation fuel with no sulfur emissions or particulates, and... emissions , Congress effectively killed CTL fuel development in the United States with an amendment to the Energy Independence and Security Act so that

  1. Interdisciplinary study of atmospheric processes and constituents of the mid-Atlantic coastal region. Attachment 4: Data set for background investigation of atmospheric constituents for Nansemond River site. [a proposed oil refinery site

    NASA Technical Reports Server (NTRS)

    Kindle, E. C.; Bandy, E. C.; Copeland, G.; Blais, R.; Levy, G.; Sonenshine, D.; Adams, D.; Maier, G.

    1975-01-01

    Background data was provided for the assessment of the environmental impact of a proposed oil refinery location. Climatic background, particulate data, digitized portrayal of site molecular and meteorological data, graphical portrayal of molecular data, hourly meteorological data, and streamflow charts and radiosonde data are given

  2. Refinery Outages

    EIA Publications

    2017-01-01

    EIA's latest analysis of planned refinery outages during the first half of 2017 finds that such outages are not expected to cause a shortfall in the supply of petroleum products including gasoline, jet fuel, and distillate fuel, relative to expected demand, either nationally or within any U.S. region. This result occurs notwithstanding the current high level of U.S. gasoline demand, which in 2016 was as high as or higher than in any past year.

  3. AAFE large deployable antenna development program: Executive summary

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The large deployable antenna development program sponsored by the Advanced Applications Flight Experiments of the Langley Research Center is summarized. Projected user requirements for large diameter deployable reflector antennas were reviewed. Trade-off studies for the selection of a design concept for 10-meter diameter reflectors were made. A hoop/column concept was selected as the baseline concept. Parametric data are presented for 15-meter, 30-meter, and 100-meter diameters. A 1.82-meter diameter engineering model which demonstrated the feasiblity of the concept is described.

  4. California crude-pipeline plans detailed

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ronco, M.J.

    1986-06-09

    California and the U.S. West have recently become a center for crude-oil pipeline activity. That activity includes existing and proposed lines, offshore and onshore terminals, and some unusual permitting and construction requirements. Operation of existing pipelines is influenced by the varying gravities of crudes in the area. California has three distinct producing areas from which pipelines deliver crude to refineries or marines terminals: 1. The inland Los Angeles basin and coast from Orange County to Ventura County. 2. The San Joaquin Valley in central California which is between the coastal mountains and the Sierras. 3. That portion of the Outermore » Continental Shelf (OCS) located primarily in federal waters off Santa Barbara and San Luis Obispo counties on the central coast. The Los Angeles coastal and inland basin crude-oil pipeline system consists of gathering lines to move crude from the many wells throughout Ventura, Orange, and Los Angeles counties to operating refineries in the greater Los Angeles area. Major refineries include ARCO at Carson, Chevron at El Segundo, Mobil at Torrance, and Shell, Texaco, and Unical at Wilmington. The many different crude-oil pipelines serving these refineries from Ventura County and Orange County and from the many sites around Los Angeles County are too numerous to list.« less

  5. Refining and blending of aviation turbine fuels.

    PubMed

    White, R D

    1999-02-01

    Aviation turbine fuels (jet fuels) are similar to other petroleum products that have a boiling range of approximately 300F to 550F. Kerosene and No.1 grades of fuel oil, diesel fuel, and gas turbine oil share many similar physical and chemical properties with jet fuel. The similarity among these products should allow toxicology data on one material to be extrapolated to the others. Refineries in the USA manufacture jet fuel to meet industry standard specifications. Civilian aircraft primarily use Jet A or Jet A-1 fuel as defined by ASTM D 1655. Military aircraft use JP-5 or JP-8 fuel as defined by MIL-T-5624R or MIL-T-83133D respectively. The freezing point and flash point are the principle differences between the finished fuels. Common refinery processes that produce jet fuel include distillation, caustic treatment, hydrotreating, and hydrocracking. Each of these refining processes may be the final step to produce jet fuel. Sometimes blending of two or more of these refinery process streams are needed to produce jet fuel that meets the desired specifications. Chemical additives allowed for use in jet fuel are also defined in the product specifications. In many cases, the customer rather than the refinery will put additives into the fuel to meet their specific storage or flight condition requirements.

  6. Review on innovative techniques in oil sludge bioremediation

    NASA Astrophysics Data System (ADS)

    Mahdi, Abdullah M. El; Aziz, Hamidi Abdul; Eqab, Eqab Sanoosi

    2017-10-01

    Petroleum hydrocarbon waste is produced in worldwide refineries in significant amount. In Libya, approximately 10,000 tons of oil sludge is generated in oil refineries (hydrocarbon waste mixtures) annually. Insufficient treatment of those wastes can threaten the human health and safety as well as our environment. One of the major challenges faced by petroleum refineries is the safe disposal of oil sludge generated during the cleaning and refining process stages of crude storage facilities. This paper reviews the hydrocarbon sludge characteristics and conventional methods for remediation of oil hydrocarbon from sludge. This study intensively focuses on earlier literature to describe the recently selected innovation technology in oily hydrocarbon sludge bioremediation process. Conventional characterization parameters or measurable factors can be gathered in chemical, physical, and biological parameters: (1) Chemical parameters are consequently necessary in the case of utilization of topsoil environment when they become relevant to the presence of nutrients and toxic compounds; (2) Physical parameters provide general data on sludge process and hand ability; (3) Biological parameters provide data on microbial activity and organic matter presence, which will be used to evaluate the safety of the facilities. The objective of this research is to promote the bioremediating oil sludge feasibility from Marsa El Hariga Terminal and Refinery (Tobruk).

  7. 76 FR 7815 - Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Over 41/2

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-11

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-850] Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Over 4\\1/2\\ Inches) From Japan: Extension of... administrative review of the antidumping duty order on certain large diameter carbon and alloy seamless standard...

  8. Controlled growth of well-aligned carbon nanotubes with large diameters

    NASA Astrophysics Data System (ADS)

    Wang, Xianbao; Liu, Yunqi; Zhu, Daoben

    2001-06-01

    Well-aligned carbon nanotubes (CNTs) with large diameters (25-200 nm) were synthesized by pyrolysis of iron(II) phthalocyanine. The outer diameter up to 218.5 nm and the length of the well-aligned CNTs can be systematically controlled by varying the growth time. A tube-in-tube nano-structure with large and small diameters of 176 and 16.7 nm, respectively, was found. The grain sizes of the iron catalyst play an important role in controlling the CNT diameters. These results are of great importance to design new aligned CNT-based electron field emitters in the potential application of panel displays.

  9. Apparatus for measuring surface particulate contamination

    DOEpatents

    Woodmansee, Donald E.

    2002-01-01

    An apparatus for measuring surface particulate contamination includes a tool for collecting a contamination sample from a target surface, a mask having an opening of known area formed therein for defining the target surface, and a flexible connector connecting the tool to the mask. The tool includes a body portion having a large diameter section defining a surface and a small diameter section extending from the large diameter section. A particulate collector is removably mounted on the surface of the large diameter section for collecting the contaminants. The tool further includes a spindle extending from the small diameter section and a spool slidingly mounted on the spindle. A spring is disposed between the small diameter section and the spool for biasing the spool away from the small diameter section. An indicator is provided on the spindle so as to be revealed when the spool is pressed downward to compress the spring.

  10. 40 CFR 421.323 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Chromium (total) 27.14 11.00 Copper 93.88 44.74 Nickel 40.34 27.14 Fluoride 2,567.00 1,459.00 (b) Slag... in the refinery Chromium (total) 1.689 0.685 Copper 5.844 2.785 Nickel 2.511 1.689 Fluoride 159.800... per million pounds) of uranium processed in the refinery Chromium (total) 2.357 0.955 Copper 8.152 3...

  11. 40 CFR 421.323 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Chromium (total) 27.14 11.00 Copper 93.88 44.74 Nickel 40.34 27.14 Fluoride 2,567.00 1,459.00 (b) Slag... in the refinery Chromium (total) 1.689 0.685 Copper 5.844 2.785 Nickel 2.511 1.689 Fluoride 159.800... per million pounds) of uranium processed in the refinery Chromium (total) 2.357 0.955 Copper 8.152 3...

  12. Refining and end use study of coal liquids II - linear programming analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lowe, C.; Tam, S.

    1995-12-31

    A DOE-funded study is underway to determine the optimum refinery processing schemes for producing transportation fuels that will meet CAAA regulations from direct and indirect coal liquids. The study consists of three major parts: pilot plant testing of critical upgrading processes, linear programming analysis of different processing schemes, and engine emission testing of final products. Currently, fractions of a direct coal liquid produced form bituminous coal are being tested in sequence of pilot plant upgrading processes. This work is discussed in a separate paper. The linear programming model, which is the subject of this paper, has been completed for themore » petroleum refinery and is being modified to handle coal liquids based on the pilot plant test results. Preliminary coal liquid evaluation studies indicate that, if a refinery expansion scenario is adopted, then the marginal value of the coal liquid (over the base petroleum crude) is $3-4/bbl.« less

  13. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sudman, D.L.

    For 17 years, the sensor-based IBM 1800 computer successfully fulfilled Sun's requirements for data acquisition and process control at its petroleum refinery in Toledo, Ohio. However, faltering reliability due to deterioration, coupled with IBM's announced withdrawal of contractual hardware maintenance, prompted Sun to approach IBM regarding potential solutions to the problem of economically maintaining the IBM 1800 as a viable system in the Toledo Refinery. In concert, IBM and Sun identified several options, but an IBM proposal which held the most promise for long term success was the direct replacement of the IBM 1800 processor and software systems with anmore » IBM 4300 running IBM's licensed program product ''Advanced Control System,'' i.e., ACS. Sun chose this solution. The intent of this paper is to chronicle the highlights of the project which successfully revitalized the process computer facilities in Sun's Toledo Refinery in only 10 months, under financial constraints, and using limited human resources.« less

  14. Health hazard evaluation report HETA 83-248-1515, Arco Philadelphia refinery, Philadelphia, Pennsylvania

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lewis, F.A.; Parrish, G.

    1984-10-01

    A bulk sample of fractionator residue was analyzed for polynuclear aromatic (PNA) compounds at the catalytic cracking unit of ARCO Philadelphia Refinery (SIC-2911), Philadelphia, Pennsylvania in May, 1983. The study was requested by the Atlantic Independent Union to determine if skin rashes and skin irritation occurring among refinery workers were caused by PNA in the fractionators. The authors conclude that a health hazard from exposure to chemicals at the cracking unit may exist. No specific chemical agent can be identified. Dust from the catalyst and oily residues that could contaminate workers shoes and clothing may have contributed to some ofmore » the dermatitis cases. Recommendations include laundering workers coveralls by dry cleaning to insure the removal of oily residues, providing workers with oil resistant or oil proof work boots, and repairing the ventilator in the sample preparation room adjacent to the block house.« less

  15. Diameter Control and Photoluminescence of ZnO Nanorods from Trialkylamines

    DOE PAGES

    Andelman, Tamar; Gong, Yinyan; Neumark, Gertrude; ...

    2007-01-01

    A novel solution method to control the diameter of ZnO nanorods is reported. Small diameter (2-3 nm) nanorods were synthesized from trihexylamine, and large diameter (50–80 nm) nanorods were synthesized by increasing the alkyl chain length to tridodecylamine. The defect (green) emission of the photoluminescence (PL) spectra of the nanorods varies with diameter, and can thus be controlled by the diameter control. The small ZnO nanorods have strong green emission, while the large diameter nanorods exhibit a remarkably suppressed green band. We show that this observation supports surface oxygen vacancies as the defect that gives rise to the green emission.

  16. Large tree diameter distribution modelling using sparse airborne laser scanning data in a subtropical forest in Nepal

    NASA Astrophysics Data System (ADS)

    Rana, Parvez; Vauhkonen, Jari; Junttila, Virpi; Hou, Zhengyang; Gautam, Basanta; Cawkwell, Fiona; Tokola, Timo

    2017-12-01

    Large-diameter trees (taking DBH > 30 cm to define large trees) dominate the dynamics, function and structure of a forest ecosystem. The aim here was to employ sparse airborne laser scanning (ALS) data with a mean point density of 0.8 m-2 and the non-parametric k-most similar neighbour (k-MSN) to predict tree diameter at breast height (DBH) distributions in a subtropical forest in southern Nepal. The specific objectives were: (1) to evaluate the accuracy of the large-tree fraction of the diameter distribution; and (2) to assess the effect of the number of training areas (sample size, n) on the accuracy of the predicted tree diameter distribution. Comparison of the predicted distributions with empirical ones indicated that the large tree diameter distribution can be derived in a mixed species forest with a RMSE% of 66% and a bias% of -1.33%. It was also feasible to downsize the sample size without losing the interpretability capacity of the model. For large-diameter trees, even a reduction of half of the training plots (n = 250), giving a marginal increase in the RMSE% (1.12-1.97%) was reported compared with the original training plots (n = 500). To be consistent with these outcomes, the sample areas should capture the entire range of spatial and feature variability in order to reduce the occurrence of error.

  17. The Importance of Large-Diameter Trees to Forest Structural Heterogeneity

    PubMed Central

    Lutz, James A.; Larson, Andrew J.; Freund, James A.; Swanson, Mark E.; Bible, Kenneth J.

    2013-01-01

    Large-diameter trees dominate the structure, dynamics and function of many temperate and tropical forests. However, their attendant contributions to forest heterogeneity are rarely addressed. We established the Wind River Forest Dynamics Plot, a 25.6 ha permanent plot within which we tagged and mapped all 30,973 woody stems ≥1 cm dbh, all 1,966 snags ≥10 cm dbh, and all shrub patches ≥2 m2. Basal area of the 26 woody species was 62.18 m2/ha, of which 61.60 m2/ha was trees and 0.58 m2/ha was tall shrubs. Large-diameter trees (≥100 cm dbh) comprised 1.5% of stems, 31.8% of basal area, and 17.6% of the heterogeneity of basal area, with basal area dominated by Tsuga heterophylla and Pseudotsuga menziesii. Small-diameter subpopulations of Pseudotsuga menziesii, Tsuga heterophylla and Thuja plicata, as well as all tree species combined, exhibited significant aggregation relative to the null model of complete spatial randomness (CSR) up to 9 m (P≤0.001). Patterns of large-diameter trees were either not different from CSR (Tsuga heterophylla), or exhibited slight aggregation (Pseudotsuga menziesii and Thuja plicata). Significant spatial repulsion between large-diameter and small-diameter Tsuga heterophylla suggests that large-diameter Tsuga heterophylla function as organizers of tree demography over decadal timescales through competitive interactions. Comparison among two forest dynamics plots suggests that forest structural diversity responds to intermediate-scale environmental heterogeneity and disturbances, similar to hypotheses about patterns of species richness, and richness- ecosystem function. Large mapped plots with detailed within-plot environmental spatial covariates will be required to test these hypotheses. PMID:24376579

  18. The importance of large-diameter trees to forest structural heterogeneity.

    PubMed

    Lutz, James A; Larson, Andrew J; Freund, James A; Swanson, Mark E; Bible, Kenneth J

    2013-01-01

    Large-diameter trees dominate the structure, dynamics and function of many temperate and tropical forests. However, their attendant contributions to forest heterogeneity are rarely addressed. We established the Wind River Forest Dynamics Plot, a 25.6 ha permanent plot within which we tagged and mapped all 30,973 woody stems ≥ 1 cm dbh, all 1,966 snags ≥ 10 cm dbh, and all shrub patches ≥ 2 m(2). Basal area of the 26 woody species was 62.18 m(2)/ha, of which 61.60 m(2)/ha was trees and 0.58 m(2)/ha was tall shrubs. Large-diameter trees (≥ 100 cm dbh) comprised 1.5% of stems, 31.8% of basal area, and 17.6% of the heterogeneity of basal area, with basal area dominated by Tsuga heterophylla and Pseudotsuga menziesii. Small-diameter subpopulations of Pseudotsuga menziesii, Tsuga heterophylla and Thuja plicata, as well as all tree species combined, exhibited significant aggregation relative to the null model of complete spatial randomness (CSR) up to 9 m (P ≤ 0.001). Patterns of large-diameter trees were either not different from CSR (Tsuga heterophylla), or exhibited slight aggregation (Pseudotsuga menziesii and Thuja plicata). Significant spatial repulsion between large-diameter and small-diameter Tsuga heterophylla suggests that large-diameter Tsuga heterophylla function as organizers of tree demography over decadal timescales through competitive interactions. Comparison among two forest dynamics plots suggests that forest structural diversity responds to intermediate-scale environmental heterogeneity and disturbances, similar to hypotheses about patterns of species richness, and richness- ecosystem function. Large mapped plots with detailed within-plot environmental spatial covariates will be required to test these hypotheses.

  19. Isotachophoresis system having larger-diameter channels flowing into channels with reduced diameter and with selectable counter-flow

    DOEpatents

    Mariella, Jr., Raymond P.

    2018-03-06

    An isotachophoresis system for separating a sample containing particles into discrete packets including a flow channel, the flow channel having a large diameter section and a small diameter section; a negative electrode operably connected to the flow channel; a positive electrode operably connected to the flow channel; a leading carrier fluid in the flow channel; a trailing carrier fluid in the flow channel; and a control for separating the particles in the sample into discrete packets using the leading carrier fluid, the trailing carrier fluid, the large diameter section, and the small diameter section.

  20. Upgrade of Long-chain Hydrocarbons by Low Pressure Oxygen Plasmas

    NASA Astrophysics Data System (ADS)

    Patiño, Pedro; Méndez, Bernardo; Gambús, Gloria

    1998-10-01

    Huge known heavy oil deposits in many countries remain largely untapped. The API gravity of crude oils has been decreasing by about 0.17% per year, this meaning that there will be an urgent need for economically viable new technologies to upgrade the heavy oil for the refineries. The same applies to the residues of several refineries processes. This work will present the results of the application of a plasma process to upgrade long-chain hydrocarbons, namely, tridecane, tetradecane, and squalane (shark oil). They are high boiling point alkanes, the latter being a C_30H_62 with six methyl groups attached to various carbon positions on the chain. An oxygen plasma, created by a high voltage glow discharge, reached the low vapor pressure surface of each liquid hydrocarbon. This (2 mL) was cooled down to temperatures close to its freezing point in a glass reactor. Applied power was 24 W for times of reaction between 30 and 60 minutes and oxygen pressures from 0.1 to 0.4 mbar. Products were analyzed by IR and NMR spectroscopies. The ^1H and ^13C NMR spectra showed that the most important products were secondary alcohols and the corresponding ketones, for tridecane and tetradecane. For squalane, tertiary alcohols were first. Total conversions are tipically 90 to 100%

  1. Constraints on JP-900 Jet Fuel Production Concepts

    DTIC Science & Technology

    2007-01-01

    most of this research effort has focused on a coal-tar blending process. Penn State currently plans to build a one-barrel- per-day pilot plant and...which a mixture of solid coal and a refinery intermediate, decant oil, is used to pro- duce a combination of liquid fuels and coke. The findings and...petroleum refinery intermedi- ate (specifically, light cycle oil). More recently, attention has been directed toward a co-coking process, in which a

  2. Genome Sequences of Two Naphthalene-Degrading Strains of Pseudomonas balearica, Isolated from Polluted Marine Sediment and from an Oil Refinery Site.

    PubMed

    Salvà-Serra, Francisco; Jakobsson, Hedvig E; Busquets, Antonio; Gomila, Margarita; Jaén-Luchoro, Daniel; Seguí, Carolina; Aliaga-Lozano, Francisco; García-Valdés, Elena; Lalucat, Jorge; Moore, Edward R B; Bennasar-Figueras, Antoni

    2017-04-06

    The genome sequences of Pseudomonas balearica strains LS401 (CCUG 66666) and st101 (CCUG 66667) have been determined. The strains were isolated as naphthalene degraders from polluted marine sediment and from a sample from an oil refinery site, respectively. These genomes provide essential data about the biodegradation capabilities and the ecological implications of P. balearica . Copyright © 2017 Salvà-Serra et al.

  3. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Caroline Clifford; Andre Boehman; Chunshan Song

    2008-03-31

    The final report summarizes the accomplishments toward project goals during length of the project. The goal of this project was to integrate coal into a refinery in order to produce coal-based jet fuel, with the major goal to examine the products other than jet fuel. These products are in the gasoline, diesel and fuel oil range and result from coal-based jet fuel production from an Air Force funded program. The main goal of Task 1 was the production of coal-based jet fuel and other products that would need to be utilized in other fuels or for non-fuel sources, using knownmore » refining technology. The gasoline, diesel fuel, and fuel oil were tested in other aspects of the project. Light cycle oil (LCO) and refined chemical oil (RCO) were blended, hydrotreated to removed sulfur, and hydrogenated, then fractionated in the original production of jet fuel. Two main approaches, taken during the project period, varied where the fractionation took place, in order to preserve the life of catalysts used, which includes (1) fractionation of the hydrotreated blend to remove sulfur and nitrogen, followed by a hydrogenation step of the lighter fraction, and (2) fractionation of the LCO and RCO before any hydrotreatment. Task 2 involved assessment of the impact of refinery integration of JP-900 production on gasoline and diesel fuel. Fuel properties, ignition characteristics and engine combustion of model fuels and fuel samples from pilot-scale production runs were characterized. The model fuels used to represent the coal-based fuel streams were blended into full-boiling range fuels to simulate the mixing of fuel streams within the refinery to create potential 'finished' fuels. The representative compounds of the coal-based gasoline were cyclohexane and methyl cyclohexane, and for the coal-base diesel fuel they were fluorine and phenanthrene. Both the octane number (ON) of the coal-based gasoline and the cetane number (CN) of the coal-based diesel were low, relative to commercial fuels ({approx}60 ON for coal-based gasoline and {approx}20 CN for coal-based diesel fuel). Therefore, the allowable range of blending levels was studied where the blend would achieve acceptable performance. However, in both cases of the coal-based fuels, their ignition characteristics may make them ideal fuels for advanced combustion strategies where lower ON and CN are desirable. Task 3 was designed to develop new approaches for producing ultra clean fuels and value-added chemicals from refinery streams involving coal as a part of the feedstock. It consisted of the following three parts: (1) desulfurization and denitrogenation which involves both new adsorption approach for selective removal of nitrogen and sulfur and new catalysts for more effective hydrotreating and the combination of adsorption denitrogenation with hydrodesulfurization; (2) saturation of two-ring aromatics that included new design of sulfur resistant noble-metal catalysts for hydrogenation of naphthalene and tetralin in middle distillate fuels, and (3) value-added chemicals from naphthalene and biphenyl, which aimed at developing value-added organic chemicals from refinery streams such as 2,6-dimethylnaphthalene and 4,4{prime}-dimethylbiphenyl as precursors to advanced polymer materials. Major advances were achieved in this project in designing the catalysts and sorbent materials, and in developing fundamental understanding. The objective of Task 4 was to evaluate the effect of introducing coal into an existing petroleum refinery on the fuel oil product, specifically trace element emissions. Activities performed to accomplish this objective included analyzing two petroleum-based commercial heavy fuel oils (i.e., No. 6 fuel oils) as baseline fuels and three co-processed fuel oils, characterizing the atomization performance of a No. 6 fuel oil, measuring the combustion performance and emissions of the five fuels, specifically major, minor, and trace elements when fired in a watertube boiler designed for natural gas/fuel oil, and determining the boiler performance when firing the five fuels. Two different co-processed fuel oils were tested: one that had been partially hydrotreated, and the other a product of fractionation before hydrotreating. Task 5 focused on examining refining methods that would utilize coal and produce thermally stable jet fuel, included delayed coking and solvent extraction. Delayed coking was done on blends of decant oil and coal, with the goal to produce a premium carbon product and liquid fuels. Coking was done on bench scale and large laboratory scale cokers. Two coals were examined for co-coking, using Pittsburgh seam coal and Marfork coal product. Reactions in the large, laboratory scaled coker were reproducible in yields of products and in quality of products. While the co-coke produced from both coals was of sponge coke quality, minerals left in the coke made it unacceptable for use as anode or graphite grade filler.« less

  4. Metal leaching from refinery waste hydroprocessing catalyst.

    PubMed

    Marafi, Meena; Rana, Mohan S

    2018-05-18

    The present study aims to develop an eco-friendly methodology for the recovery of nickel (Ni), molybdenum (Mo), and vanadium (V) from the refinery waste spent hydroprocessing catalyst. The proposed process has two stages: the first stage is to separate alumina, while the second stage involves the separation of metal compounds. The effectiveness of leaching agents, such as NH 4 OH, (NH 4 ) 2 CO 3 , and (NH 4 ) 2 S 2 O 8 , for the extraction of Mo, V, Ni, and Al from the refinery spent catalyst has been reported as a function of reagent concentration (0.5 to 2.0 molar), leaching time (1 to 6 h), and temperature (35 to 60°C). The optimal leaching conditions were achieved to obtain the maximum recovery of Mo, Ni, and V metals. The effect of the mixture of multi-ammonium salts on the metal extraction was also studied, which showed an adverse effect for Ni and V, while marginal improvement was observed for Mo leaching. The ammonium salts can form soluble metal complexes, in which stability or solubility depends on the nature of ammonium salt and the reaction conditions. The extracted metals and support can be reused to synthesize a fresh hydroprocessing catalyst. The process will reduce the refinery waste and recover the expensive metals. Therefore, the process is not only important from an environmental point of view but also vital from an economic perspective.

  5. Pilot scale thin film plate reactors for the photocatalytic treatment of sugar refinery wastewater.

    PubMed

    Saran, S; Kamalraj, G; Arunkumar, P; Devipriya, S P

    2016-09-01

    Pilot scale thin film plate reactors (TFPR) were fabricated to study the solar photocatalytic treatment of wastewater obtained from the secondary treatment plant of a sugar refinery. Silver-impregnated titanium dioxide (TiO2) was prepared by a facile chemical reduction method, characterized, and immobilized onto the surface of ceramic tiles used in the pilot scale reactors. On 8 h of solar irradiation, percentage reduction of chemical oxygen demand (COD) of the wastewater by Ag/TiO2, pure TiO2, and control (without catalyst) TFPR was about 95, 86, and 22 % respectively. The effects of operational parameters such as, flow rate, pH, and addition of hydrogen peroxide (H2O2) were optimized as they influence the rate of COD reduction. Under 3 h of solar irradiation, 99 % COD reduction was observed at an optimum flow rate of 15 L h(-1), initial pH of 2, and addition of 5 mM of H2O2. The results show that Ag/TiO2 TFPR could be effectively used for the tertiary treatment of sugar refinery effluent using sunlight as the energy source. The treated water could be reused for industrial purposes, thus reducing the water footprint of the industry. Graphical Abstract Sugar refinery effluent treatment by solar photocatalytic TFPR.

  6. Incidence of Myelodysplastic Syndrome in UK Petroleum Distribution and Oil Refinery Workers, 1995–2011

    PubMed Central

    Sorahan, Tom; Mohammed, Nuredin

    2016-01-01

    The incidence of myelodysplastic syndrome (MDS) experienced by cohorts of 16,467 petroleum distribution workers and 28,554 oil refinery workers has been investigated. Study subjects were all those male employees first employed at one of 476 UK petroleum distribution centres or eight UK oil refineries in the period 1946–1974; all subjects had a minimum of twelve months employment with some employment after 1st January, 1951. Observed numbers (Obs) of MDS cases were compared with expectations based on national incidence rates for the period 1995–2011. The overall standardised registration ratio (SRR) was 73 (Obs = 17) in petroleum distribution workers for the age-range 15–84 years, and 77 (Obs = 21) for the age-range 15–99 years. The overall SRR was 81 (Obs = 29) in oil refinery workers for the age-range 15–84 years, and 83 (Obs = 36) for the age-range 15–99 years. More detailed analyses were carried out in terms of year of registration, period from hire, decade of hire, and duration of employment. The overall SRR findings did not provide clear evidence for the presence of an occupational cancer hazard, and provide no support for the hypothesis that low-level benzene exposure has an important effect on the risks of MDS. PMID:27164123

  7. Updated epidemiological study of workers at two California petroleum refineries, 1950–95

    PubMed Central

    Satin, K; Bailey, W; Newton, K; Ross, A; Wong, O

    2002-01-01

    Objectives: To further assess the potential role of occupational exposures on mortality, a second update of a cohort study of workers at two petroleum refineries in California was undertaken. Methods: Mortality analyses were based on standardised mortality ratios (SMRs) and 95% confidence intervals (95% CIs) using the general population of California as a reference. Additional analyses of lymphatic and haematopoietic cancer deaths and diseases related to asbestos were undertaken. Results: The update consisted of 18 512 employees, who contributed 456 425 person-years of observation between 1950 and 1995. Both overall mortality and total cancer mortality were significantly lower than expected, as were several site specific cancers and non-malignant diseases. In particular, no significant increases were reported for leukaemia cell types or non-Hodgkin's lymphoma. Mortality excess from multiple myeloma was marginally significant. The excess was confined to employees enrolled before 1949. Furthermore, there was no significant upward trend based on duration of employment, which argues against a causal interpretation relative to employment or exposures at the refineries. No increase was found for diseases related to asbestos: pulmonary fibrosis; lung cancer; or malignant mesothelioma. There was no significant increase in mortality from any other cancers or non-malignant diseases. Conclusion: This second update provides additional reassurance that employment at these two refineries is not associated with increased risk of mortality. PMID:11934952

  8. Potential and optimization of two-phase anaerobic digestion of oil refinery waste activated sludge and microbial community study

    PubMed Central

    Wang, Qinghong; Liang, Ying; Zhao, Peng; Li, Qing X.; Guo, Shaohui; Chen, Chunmao

    2016-01-01

    Oil refinery waste activated sludge produced from oil wastewater biological treatment is a major industrial sludge. Two-phase anaerobic digestion of oil refinery waste activated sludge was studied for the first time. Thermal pretreatment under 170 °C is effective on sludge solubilization. At the optimum hydrolytic-acidogenic condition which was pH of 6.5, temperature of 55 °C and HRT of 2 days, 2754 mg/L volatile fatty acids (VFAs) were produced and acetic acid and butyric acid were the key components. Comparative studies of single-phase and two-phase anaerobic digestion in terms of organic removal, biogas production and methane concentration were conducted. The cumulative methane production and soluble COD (SCOD) removal efficiency in the two-phase system were 228 mL/g COD added and 77.8%, respectively, which were 1.6 and 2.1 times higher than those in single-phase anaerobic digestion. Such improved performance is attributed to intensification of dominant microbial population in separated reactors. Caloramator, Ureibacillus, Dechloromonas, Petrobacter, and T78 played important roles in hydrolytic-acidification and oil-organics degradation. Syntrophic bacteria in the family Porphyromonadaceae and the genus Anaerobranca provide acetate for methanogen. The results demonstrated the potential and operating condition of two-phase anaerobic digestion in treatment of oil refinery waste activated sludge. PMID:27905538

  9. Potential and optimization of two-phase anaerobic digestion of oil refinery waste activated sludge and microbial community study

    NASA Astrophysics Data System (ADS)

    Wang, Qinghong; Liang, Ying; Zhao, Peng; Li, Qing X.; Guo, Shaohui; Chen, Chunmao

    2016-12-01

    Oil refinery waste activated sludge produced from oil wastewater biological treatment is a major industrial sludge. Two-phase anaerobic digestion of oil refinery waste activated sludge was studied for the first time. Thermal pretreatment under 170 °C is effective on sludge solubilization. At the optimum hydrolytic-acidogenic condition which was pH of 6.5, temperature of 55 °C and HRT of 2 days, 2754 mg/L volatile fatty acids (VFAs) were produced and acetic acid and butyric acid were the key components. Comparative studies of single-phase and two-phase anaerobic digestion in terms of organic removal, biogas production and methane concentration were conducted. The cumulative methane production and soluble COD (SCOD) removal efficiency in the two-phase system were 228 mL/g COD added and 77.8%, respectively, which were 1.6 and 2.1 times higher than those in single-phase anaerobic digestion. Such improved performance is attributed to intensification of dominant microbial population in separated reactors. Caloramator, Ureibacillus, Dechloromonas, Petrobacter, and T78 played important roles in hydrolytic-acidification and oil-organics degradation. Syntrophic bacteria in the family Porphyromonadaceae and the genus Anaerobranca provide acetate for methanogen. The results demonstrated the potential and operating condition of two-phase anaerobic digestion in treatment of oil refinery waste activated sludge.

  10. TPH-contaminated Mexican refinery soil: health risk assessment and the first year of changes.

    PubMed

    Iturbe, Rosario; Flores, Rosa M; Flores, Carlos R; Torres, Luis G

    2004-02-01

    The soil of a coastal Mexican refinery is quite contaminated, especially by hydrocarbons, with detected concentrations up to 130000 mg kg(-1) as TPHs (total petroleum hydrocarbons). The main sources of contamination are pipelines, valves, and old storage tanks, besides the land disposal of untreated hydrocarbon sediments derived from the cleaning of storage tanks. A health risk assessment (HRA) was carried out in order to measure the risk hazard indexes and clean-up standards for the refinery soil. HRA suggested the following actions to be taken: benzene concentrations must be reduced in eight of the 16 studied refinery zones to 0.0074-0.0078 mg kg(-1). Also, vanadium concentration must be reduced in two zones up to a concentration of 100 mg kg(-1). In only one of all of the studied zones, benzo(a)pyrene concentration must be reduced to 0.1 mg kg(-1). After 1 yr, TPHs showed a diminution of about 52%. Even though TPHs concentrations were variable, during 1999 the average concentrations were as much as 15.5 times the goal concentration. For year 2000, TPHs concentrations were only 7.4-fold the proposed value. For the 1999-2000 period, PAHs (polycyclic aromatic hydrocarbons) concentrations decreased by 82%. Some PAHs with 2, 3, 4, and 5 aromatic rings were removed up to 100% values.

  11. Smoking and occupational allergy in workers in a platinum refinery.

    PubMed Central

    Venables, K. M.; Dally, M. B.; Nunn, A. J.; Stevens, J. F.; Stephens, R.; Farrer, N.; Hunter, J. V.; Stewart, M.; Hughes, E. G.; Newman Taylor, A. J.

    1989-01-01

    OBJECTIVE--To test the hypothesis that smoking increases the risk of sensitisation by occupational allergens. DESIGN--Historical prospective cohort study. SETTING--Platinum refinery. SUBJECTS--91 Workers (86 men) who started work between 1 January 1973 and 31 December 1974 and whose smoking habit and atopic state (on skin prick testing with common allergens) had been noted at joining. MAIN OUTCOME MEASURES--Results of skin prick tests with platinum salts carried out routinely every three to six months and records of any respiratory symptoms noted by the refinery's occupational health service. Follow up was until 1980 or until leaving refinery work, whichever was earlier. RESULTS--57 Workers smoked and 29 were atopic; 22 developed a positive result on skin testing with platinum salts and 49 developed symptoms, including all 22 whose skin test result was positive. Smoking was the only significant predictor of a positive result on skin testing with platinum salts and its effect was greater than that of atopy; the estimated relative risks (95% confidence interval) when both were included in the regression model were: smokers versus non-smokers 5.05 (1.68 to 15.2) and atopic versus non-atopic 2.29 (0.88 to 5.99). Number of cigarettes smoked per day was the only significant predictor of respiratory symptoms. CONCLUSION--Smokers are at increased risk of sensitisation by platinum salts. PMID:2508944

  12. Steam explosion and its combinatorial pretreatment refining technology of plant biomass to bio-based products.

    PubMed

    Chen, Hong-Zhang; Liu, Zhi-Hua

    2015-06-01

    Pretreatment is a key unit operation affecting the refinery efficiency of plant biomass. However, the poor efficiency of pretreatment and the lack of basic theory are the main challenges to the industrial implementation of the plant biomass refinery. The purpose of this work is to review steam explosion and its combinatorial pretreatment as a means of overcoming the intrinsic characteristics of plant biomass, including recalcitrance, heterogeneity, multi-composition, and diversity. The main advantages of the selective use of steam explosion and other combinatorial pretreatments across the diversity of raw materials are introduced. Combinatorial pretreatment integrated with other unit operations is proposed as a means to exploit the high-efficiency production of bio-based products from plant biomass. Finally, several pilot- and demonstration-scale operations of the plant biomass refinery are described. Based on the principle of selective function and structure fractionation, and multi-level and directional composition conversion, an integrated process with the combinatorial pretreatments of steam explosion and other pretreatments as the core should be feasible and conform to the plant biomass refinery concept. Combinatorial pretreatments of steam explosion and other pretreatments should be further exploited based on the type and intrinsic characteristics of the plant biomass used, the bio-based products to be made, and the complementarity of the processes. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Remotely Operated Vehicle ROV/AUV Reliability Study. Phase 2.

    DTIC Science & Technology

    1989-09-01

    produce workable configurations for large diameter cyl nders strong enough to survive high compression forces. 11 1.4.5.1.1 Composites Although FWE...Since the main cylinder in manned submersibles is typically large diameter , and the interior is only partially filled with equipment, these systems...ceramics involve control of tolerances when manufacturing large diameter cylinders, although ongoing R&D may provide solutions to this. The major

  14. St. Croix, U.S. Virgin Islands, Caribbean Sea

    NASA Image and Video Library

    1993-01-19

    STS054-74-049 (13-19 Jan. 1993) --- St. Croix is the largest, and most industrial of the U.S. Virgin Islands. This photograph captures St. Croix's features in great detail. The large industrial complex in the middle of the southern shore is the world's largest petroleum refinery. The main city, Christiansted, can be seen across the island on the north shore. The reefs around the eastern end of St. Croix are preserved as a submarine national park -- Buck Island Reef National Park -- around the small island off the north shore of the eastern end of St. Croix.

  15. Polycyclic aromatic hydrocarbons, brachial artery distensibility and blood pressure among children residing near an oil refinery

    PubMed Central

    Trasande, Leonardo; Urbina, Elaine M.; Khoder, Mamdouh; Alghamdi, Mansour; Shabaj, Ibrahim; Alam, Mohammed S.; Harrison, Roy M.; Shamy, Magdy

    2017-01-01

    Background Polycyclic aromatic hydrocarbons (PAH) are produced by the burning and processing of fuel oils, and have been associated with oxidant stress, insulin resistance and hypertension in adults. Few studies have examined whether adolescents are susceptible to cardiovascular effects of PAHs. Objective To study associations of PAH exposure with blood pressure (BP) and brachial artery distensibility (BAD), an early marker of arterial wall stiffness, in young boys attending three schools in Jeddah, Saudi Arabia in varying proximity to an oil refinery. Methods Air samples collected from the three schools were analyzed for PAHs. PAH metabolites (total hydroxyphenanthrenes and 1-hydroxypyrene) were measured in urine samples from 184 adolescent males, in whom anthropometrics, heart rate, pulse pressure, brachial artery distensibility and blood pressure were measured. Descriptive, bivariate and multivariable analyses were performed to assess relationships of school location and urinary PAH metabolites with cardiovascular measures. Results Total suspended matter was significantly higher (444 ± 143 µg/m3) at the school near the refinery compared to a school located near a ring road (395 ± 65 µg/m3) and a school located away from vehicle traffic (232 ± 137 µg/m3), as were PAHs. Systolic (0.47 SD units, p = 0.006) and diastolic (0.53 SD units, p < 0.001) BP Z-scores were highest at the school near the refinery, with a 4.36-fold increase in prehypertension (p = 0.001), controlling for confounders. No differences in pulse pressure, BAD and heart rate were noted in relationship to school location. Urinary total hydroxyphenanthrenes and 1-hydroxypyrene were not associated with cardiovascular outcomes. Conclusions Proximity to an oil refinery in Saudi Arabia is associated with prehypertension and increases in PAH and particulate matter exposures. Further study including insulin resistance measurements, better control for confounding, and longitudinal measurement is indicated. PMID:25460629

  16. Polycyclic aromatic hydrocarbons, brachial artery distensibility and blood pressure among children residing near an oil refinery.

    PubMed

    Trasande, Leonardo; Urbina, Elaine M; Khoder, Mamdouh; Alghamdi, Mansour; Shabaj, Ibrahim; Alam, Mohammed S; Harrison, Roy M; Shamy, Magdy

    2015-01-01

    Polycyclic aromatic hydrocarbons (PAH) are produced by the burning and processing of fuel oils, and have been associated with oxidant stress, insulin resistance and hypertension in adults. Few studies have examined whether adolescents are susceptible to cardiovascular effects of PAHs. To study associations of PAH exposure with blood pressure (BP) and brachial artery distensibility (BAD), an early marker of arterial wall stiffness, in young boys attending three schools in Jeddah, Saudi Arabia in varying proximity to an oil refinery. Air samples collected from the three schools were analyzed for PAHs. PAH metabolites (total hydroxyphenanthrenes and 1-hydroxypyrene) were measured in urine samples from 184 adolescent males, in whom anthropometrics, heart rate, pulse pressure, brachial artery distensibility and blood pressure were measured. Descriptive, bivariate and multivariable analyses were performed to assess relationships of school location and urinary PAH metabolites with cardiovascular measures. Total suspended matter was significantly higher (444 ± 143 μg/m(3)) at the school near the refinery compared to a school located near a ring road (395 ± 65 μg/m(3)) and a school located away from vehicle traffic (232 ± 137 μg/m(3)), as were PAHs. Systolic (0.47 S D units, p = 0.006) and diastolic (0.53 SD units, p < 0.001) BP Z-scores were highest at the school near the refinery, with a 4.36-fold increase in prehypertension (p = 0.001), controlling for confounders. No differences in pulse pressure, BAD and heart rate were noted in relationship to school location. Urinary total hydroxyphenanthrenes and 1-hydroxypyrene were not associated with cardiovascular outcomes. Proximity to an oil refinery in Saudi Arabia is associated with prehypertension and increases in PAH and particulate matter exposures. Further study including insulin resistance measurements, better control for confounding, and longitudinal measurement is indicated. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Active and uncontrolled asthma among children exposed to air stack emissions of sulphur dioxide from petroleum refineries in Montreal, Quebec: A cross-sectional study

    PubMed Central

    Deger, Leylâ; Plante, Céline; Jacques, Louis; Goudreau, Sophie; Perron, Stéphane; Hicks, John; Kosatsky, Tom; Smargiassi, Audrey

    2012-01-01

    BACKGROUND: Little attention has been devoted to the effects on children’s respiratory health of exposure to sulphur dioxide (SO2) in ambient air from local industrial emissions. Most studies on the effects of SO2 have assessed its impact as part of the regional ambient air pollutant mix. OBJECTIVE: To examine the association between exposure to stack emissions of SO2 from petroleum refineries located in Montreal’s (Quebec) east-end industrial complex and the prevalence of active asthma and poor asthma control among children living nearby. METHODS: The present cross-sectional study used data from a respiratory health survey of Montreal children six months to 12 years of age conducted in 2006. Of 7964 eligible households that completed the survey, 842 children between six months and 12 years of age lived in an area impacted by refinery emissions. Ambient SO2 exposure levels were estimated using dispersion modelling. Log-binomial regression models were used to estimate crude and adjusted prevalence ratios (PRs) and 95% CIs for the association between yearly school and residential SO2 exposure estimates and asthma outcomes. Adjustments were made for child’s age, sex, parental history of atopy and tobacco smoke exposure at home. RESULTS: The adjusted PR for the association between active asthma and SO2 levels was 1.14 (95% CI 0.94 to 1.39) per interquartile range increase in modelled annual SO2. The effect on poor asthma control was greater (PR=1.39 per interquartile range increase in modelled SO2 [95% CI 1.00 to 1.94]). CONCLUSIONS: Results of the present study suggest a relationship between exposure to refinery stack emissions of SO2 and the prevalence of active and poor asthma control in children who live and attend school in proximity to refineries. PMID:22536578

  18. Fate and effect of naphthenic acids on oil refinery activated sludge wastewater treatment systems.

    PubMed

    Misiti, Teresa; Tezel, Ulas; Pavlostathis, Spyros G

    2013-01-01

    Naphthenic acids (NAs) are a complex group of alkyl-substituted acyclic, monocyclic and polycyclic carboxylic acids present in oil sands process waters, crude oil, refinery wastewater and petroleum products. Crude oil, desalter brine, influent, activated sludge mixed liquor and effluent refinery samples were received from six United States refineries. The total acid number (TAN) of the six crudes tested ranged from 0.12 to 1.5 mg KOH/g crude oil and correlated to the total NA concentration in the crudes. The total NA concentration in the desalter brine, influent, activated sludge mixed liquor and effluent samples ranged from 4.2 to 40.4, 4.5 to 16.6, 9.6 to 140.3 and 2.8 to 11.6 mg NA/L, respectively. The NAs in all wastewater streams accounted for less than 16% of the total COD, indicating that many other organic compounds are present and that NAs are a minor component in refinery wastewaters. Susceptibility tests showed that none of the activated sludge heterotrophic microcosms was completely inhibited by NAs up to 400 mg/L. Growth inhibition ranging from 10 to 59% was observed in all microcosms at and above 100 mg NA/L. NAs chronically-sorbed to activated sludge mixed liquor biomass and powdered activated carbon (PAC) were recalcitrant and persistent. More than 80% of the total NAs remained in the solid phase at the end of the 10-day desorption period (five successive desorption steps). Throughout a 90-day incubation period, the total NA concentration decreased by 33 and 51% in PAC-free and PAC-containing mixed liquor microcosms, respectively. The lower molecular weight fraction of NAs was preferentially degraded in both mixed liquors. The persistence of the residual, higher molecular weight NAs is likely a combination of molecular recalcitrance and decreased bioavailability when chronically-sorbed to the biomass and/or PAC. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. ARC-1980-A80-7034

    NASA Image and Video Library

    1980-11-12

    Range : 660,000 kilometers (400,000 miles) Time : 5:05 am PST This Voyager 1 picture of Mimas shows a large impact structure at 110 degrees W Long., located on that face of the moon which leads Mimas in its orbit. The feature, about 130 kilometers in diameter (80 miles), is more than 1/4 the diameter of the entire moon. This is a particularly interesting feature in view of its large diameter compared with the size of the satellite, and may have the largest crater diameter/satillite diameter ratio in the solar system. The crater has a raised rim and central peak, typical of large impact structures on terrestrial planets. Additional smaller craters, 15-45 kilometers in diameter, can be seen scattered across the surface, particularly alon the terminator. Mimas is one of the smaller Saturnian satellites with a low density implying its chief component is ice.

  20. A Review of the Pollution Abatement Programs Relating to the Petroleum Refinery Industry in the Great Lakes Basin

    DTIC Science & Technology

    1982-11-01

    of spent acids and caustics . The oil content of disposed wastes is 6,200 metric tons per year or approximately .01% of the average crude refinery rate...ALKYLATION "The major discharge from sulfuric acid alkylation are the spent caustics from the neutralization of hydrocarbon streams leaving the sulfuric... spent caustic waste stream. Any leaks or spills that involve loss of fluorides constitute a serious and difficult pollution problem. Formation of

  1. The Vietnam Petroleum Industry: Positioned for Growth but Ripe for Regional Complications

    DTIC Science & Technology

    2013-10-30

    monopolistic character of PVN means the Vietnamese government is a major part of all aspects of the industry. Secondly, faced with increasing demand for...2013, JSTOR. 17 “U.S. EIA, “Vietnam” 20 18 Trong Vu and Simon Hall, “Oil Market Changes as Vietnam Build Another Refinery,” The Wall...Vietnam to Push Ahead with Offshore Exploration.” 23 Ibid. 24 Ibid. 25 Vu and Hall, “Oil Market Changes as Vietnam Build Another Refinery

  2. Alternative fuels

    NASA Technical Reports Server (NTRS)

    Grobman, J. S.; Butze, H. F.; Friedman, R.; Antoine, A. C.; Reynolds, T. W.

    1977-01-01

    Potential problems related to the use of alternative aviation turbine fuels are discussed and both ongoing and required research into these fuels is described. This discussion is limited to aviation turbine fuels composed of liquid hydrocarbons. The advantages and disadvantages of the various solutions to the problems are summarized. The first solution is to continue to develop the necessary technology at the refinery to produce specification jet fuels regardless of the crude source. The second solution is to minimize energy consumption at the refinery and keep fuel costs down by relaxing specifications.

  3. PHYSICAL PROPERTIES OF LARGE AND SMALL GRANULES IN SOLAR QUIET REGIONS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu Daren; Xie Zongxia; Hu Qinghua

    The normal mode observations of seven quiet regions obtained by the Hinode spacecraft are analyzed to study the physical properties of granules. An artificial intelligence technique is introduced to automatically find the spatial distribution of granules in feature spaces. In this work, we investigate the dependence of granular continuum intensity, mean Doppler velocity, and magnetic fields on granular diameter. We recognized 71,538 granules by an automatic segmentation technique and then extracted five properties: diameter, continuum intensity, Doppler velocity, and longitudinal and transverse magnetic flux density to describe the granules. To automatically explore the intrinsic structures of the granules in themore » five-dimensional parameter space, the X-means clustering algorithm and one-rule classifier are introduced to define the rules for classifying the granules. It is found that diameter is a dominating parameter in classifying the granules and two families of granules are derived: small granules with diameters smaller than 1.''44, and large granules with diameters larger than 1.''44. Based on statistical analysis of the detected granules, the following results are derived: (1) the averages of diameter, continuum intensity, and Doppler velocity in the upward direction of large granules are larger than those of small granules; (2) the averages of absolute longitudinal, transverse, and unsigned flux density of large granules are smaller than those of small granules; (3) for small granules, the average of continuum intensity increases with their diameters, while the averages of Doppler velocity, transverse, absolute longitudinal, and unsigned magnetic flux density decrease with their diameters. However, the mean properties of large granules are stable; (4) the intensity distributions of all granules and small granules do not satisfy Gaussian distribution, while that of large granules almost agrees with normal distribution with a peak at 1.04 I{sub 0}.« less

  4. 78 FR 60897 - Certain Welded Large Diameter Line Pipe From Japan

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-02

    ... Diameter Line Pipe From Japan Determination On the basis of the record \\1\\ developed in the subject five... order on certain welded large diameter line pipe from Japan would likely to lead to continuation or... Line Pipe from Japan: Investigation No. 731-TA-919 (Second Review). By order of the Commission. Issued...

  5. Biodegradation of oil refinery wastes under OPA and CERCLA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gamblin, W.W.; Banipal, B.S.; Myers, J.M.

    1995-12-31

    Land treatment of oil refinery wastes has been used as a disposal method for decades. More recently, numerous laboratory studies have been performed attempting to quantify degradation rates of more toxic polycyclic aromatic hydrocarbon compounds (PAHs). This paper discusses the results of the fullscale aerobic biodegradation operations using land treatment at the Macmillan Ring-Free Oil refining facility. The tiered feasibility approach of evaluating biodegradation as a treatment method to achieve site-specific cleanup criteria, including pilot biodegradation operations, is discussed in an earlier paper. Analytical results of biodegradation indicate that degradation rates observed in the laboratory can be met and exceededmore » under field conditions and that site-specific cleanup criteria can be attained within a proposed project time. Also prevented are degradation rates and half-lives for PAHs for which cleanup criteria have been established. PAH degradation rates and half-life values are determined and compared with the laboratory degradation rates and half-life values which used similar oil refinery wastes by other in investigators (API 1987).« less

  6. Sickness absence in a Singapore refinery, 1981-1992.

    PubMed

    Lai, C S

    1994-09-01

    Sickness absence among the unionised staff of the largest petroleum refinery in Singapore was followed up from 1981 to 1992. The changes seen throughout these 12 years were related to national, organisational and personal factors. Initially because of increasing competitiveness in the industry, and later because of a national recession, manpower in the refinery was progressively reduced from 1981 to 1986. This however was not the main cause of the reduction in sickness absence rates from 8.4 working days in 1981 to 5.8 days in 1983. Organisational changes to medical leave entitlements and improved means of supervision of absence were responsible for the early fall in absence rates. Personal factors, such as the increasing age of the population, did not affect the amount of short-term absences, while shift work was associated with higher absences. From 1986 absence rates rose again, eventually to almost 1981 levels by 1992, a reflection of the tendency for sickness absence to increase with time, unless active measures are undertaken for its control.

  7. Assessment of cytotoxic and genotoxic potential of refinery waste effluent using plant, animal and bacterial systems.

    PubMed

    Gupta, Amit Kumar; Ahmad, Masood

    2012-01-30

    The work described here presents the toxic effect of Mathura refinery wastewater (MRWW) in plant (Allium cepa), bacterial (E. coli K12) and human (blood) system. The samples were collected from adjoining area of Mathura refinery, Dist. Mathura, U.P. (India). Chromosomal aberration test and micronucleus assay in (A. cepa) system, E. coli K12 survival assay as well as hemolysis assay in human blood were employed to assess the toxicity of MRWW. MRWW exposure resulted in the formation of micronuclei and bridges in chromosomes of A. cepa cells. A significant decline occurred in survival of DNA repair defective mutants of E. coli K12 exposed to MRWW. On incubation with MRWW, calf thymus DNA-EtBr fluorescence intensity decreased and percent hemolysis of human blood cells increased. An induction in the MDA levels of MRWW treated A. cepa roots indicated lipid peroxidation also. Collectively, the results demonstrate a significant genotoxic and cytotoxic potential of MRWW. Copyright © 2011 Elsevier B.V. All rights reserved.

  8. Cancer incidence among Finnish oil refinery workers, 1971-1994.

    PubMed

    Pukkala, E

    1998-08-01

    Cancer incidence between 1971 and 1994 was studied in a cohort of 7,512 men and 1,942 women who had been employed for at least 3 months in a Finnish enterprise that was primarily active in oil refining. The expected numbers of cancer cases were based on the national incidence rates. The standardized incidence ratios (SIR) for overall cancer after 5 years at work was decreased by 12% because of a significant deficit from cancer of the lung in oil refineries (SIR, 0.3; 95% confidence interval [95% CI], 0.1-0.6). There was a significant excess of kidney cancer in males, which was highest among men with at least 5 years of employment in oil refineries (SIR 2.8; 95% CI, 1.6-4.7). Male blue-collar workers had a twofold risk of non-Hodgkin's lymphoma and non-melanocytic skin cancer. Occupational exposure to gasoline may be associated with increased risk of cancer of the kidney.

  9. Application of stabilization/solidification technology on oil refinery sludge contaminated by heavy metals.

    PubMed

    Karamalidis, Athanasios K; Voudrias, Evangelos A

    2004-01-01

    The oily sludge produced by petroleum refineries is classified as a solid hazardous waste, according to European regulations. The objective of this work was to investigate whether stabilization/solidification can be used as a management method for the oily sludge. The sludge samples used originated from a petroleum-storing tank and a centrifuge unit of two Greek refineries. The experiments were designed to study the leachability of the heavy metals Pb, Cr, Cd, Ni, and Cu, which are contained in the sludge, using the Toxicity Characteristic Leaching Procedure (TCLP). Despite the fact that the metals were immobilized in a cement-based environment in the presence of organic load, leaching tests have shown a low metal leachability, less than 5%. Acid Neutralizing Capacity (ANC) tests were employed in order to estimate the acid resistance of the stabilized/solidified waste. In addition to ANC, a sequential TCLP test was employed in order to understand how the pH affects the leachability of Ni from the stabilized/solidified specimen.

  10. [Occupational accidents in an oil refinery in Brazil].

    PubMed

    Souza, Carlos Augusto Vaz de; Freitas, Carlos Machado de

    2002-10-01

    Work in oil refineries involves the risk of minor to major accidents. National data show the impact of accidents on this industry. A study was carried out to describe accident profile and evaluate the adequacy of accident reporting system. Data on all accidents reported in an oil refinery in the state of Rio de Janeiro for the year 1997 were organized and analyzed. The study population consisted of 153 injury cases, 83 hired and 69 contracted workers. The variables were: type of accident, operation mode and position of the worker injured. Among hired workers, minor accidents predominated (54.2%) and they occurred during regular operation activities (62.9%). Among contracted workers, there also predominated minor accidents (75.5%) in a higher percentage, but they occurred mainly during maintenance activities (96.8%). The study results showed that there is a predominance of accidents in lower hierarchy workers, and these accidents occur mainly during maintenance activities. There is a need to improve the company's accident reporting system and accident investigation procedures.

  11. Health status of copper refinery workers with specific reference to selenium exposure

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Holness, D.L.; Taraschuk, I.G.; Nethercott, J.R.

    1989-09-01

    Copper refinery workers exposed to selenium were studied before, during, and after a shutdown period. Urine selenium levels were 83 {plus minus} 30 mumol/mol creatinine and 69 {plus minus} 27 mumol/mol creatinine when measured on two occasions during exposure compared with 56 {plus minus} 17 mumol/mol creatinine when the workers had been free of exposure for 10 wk during a shutdown. The refinery workers reported more nose and eye irritation, indigestion, stomach pain, and fatigue than controls. Garlic-like breath odor was reported to be personally and socially offensive by many of the workers. Reporting of symptoms, pulmonary function indices, andmore » laboratory test results did not change with exposure except for hemoglobin level, which rose during the shutdown. Hemoglobin levels were found to be inversely correlated with the urine selenium level, and there was a positive correlation noted for the interactive effect of urine selenium and urine arsenic levels on hemoglobin.49 references.« less

  12. 77 FR 56421 - Standards of Performance for Petroleum Refineries; Standards of Performance for Petroleum...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ...On June 24, 2008, the EPA promulgated amendments to the Standards of Performance for Petroleum Refineries and new standards of performance for petroleum refinery process units constructed, reconstructed or modified after May 14, 2007. The EPA subsequently received three petitions for reconsideration of these final rules. On September 26, 2008, the EPA granted reconsideration and issued a stay for the issues raised in the petitions regarding process heaters and flares. On December 22, 2008, the EPA addressed those specific issues by proposing amendments to certain provisions for process heaters and flares and extending the stay of these provisions until further notice. The EPA also proposed technical corrections to the rules for issues that were raised in the petitions for reconsideration. In this action, the EPA is finalizing those amendments and technical corrections and is lifting the stay of all the provisions granted on September 26, 2008 and extended until further notice on December 22, 2008.

  13. Carriage Rate and Effects of Vaccination after Outbreaks of Serogroup C Meningococcal Disease, Brazil, 2010

    PubMed Central

    Carvalhanas, Telma Regina Marques Pinto; Paula de Lemos, Ana; Gorla, Maria Cecilia Outeiro; Salgado, Maristela; Fukasawa, Lucila O.; Gonçalves, Maria Gisele; Higa, Fabio; Brandileone, Maria Cristina Cunto; Sacchi, Claudio Tavares; Ribeiro, Ana Freitas; Sato, Helena Keico; Bricks, Lucia Ferro; Cassio de Moraes, José

    2014-01-01

    During 2010, outbreaks of serogroup C meningococcal (MenC) disease occurred in 2 oil refineries in São Paulo State, Brazil, leading to mass vaccination of employees at 1 refinery with a meningococcal polysaccharide A/C vaccine. A cross-sectional study was conducted to assess the prevalence of meningococci carriage among workers at both refineries and to investigate the effect of vaccination on and the risk factors for pharyngeal carriage of meningococci. Among the vaccinated and nonvaccinated workers, rates of overall meningococci carriage (21.4% and 21.6%, respectively) and of MenC carriage (6.3% and 4.9%, respectively) were similar. However, a MenC strain belonging to the sequence type103 complex predominated and was responsible for the increased incidence of meningococcal disease in Brazil. A low education level was associated with higher risk of meningococci carriage. Polysaccharide vaccination did not affect carriage or interrupt transmission of the epidemic strain. These findings will help inform future vaccination strategies. PMID:24751156

  14. Bio-refinery approach for spent coffee grounds valorization.

    PubMed

    Mata, Teresa M; Martins, António A; Caetano, Nídia S

    2018-01-01

    Although normally seen as a problem, current policies and strategic plans concur that if adequately managed, waste can be a source of the most interesting and valuable products, among which metals, oils and fats, lignin, cellulose and hemicelluloses, tannins, antioxidants, caffeine, polyphenols, pigments, flavonoids, through recycling, compound recovery or energy valorization, following the waste hierarchy. Besides contributing to more sustainable and circular economies, those products also have high commercial value when compared to the ones obtained by currently used waste treatment methods. In this paper, it is shown how the bio-refinery framework can be used to obtain high value products from organic waste. With spent coffee grounds as a case study, a sequential process is used to obtain first the most valuable, and then other products, allowing proper valorization of residues and increased sustainability of the whole process. Challenges facing full development and implementation of waste based bio-refineries are highlighted. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Toward zero waste to landfill: an effective method for recycling zeolite waste from refinery industry

    NASA Astrophysics Data System (ADS)

    Homchuen, K.; Anuwattana, R.; Limphitakphong, N.; Chavalparit, O.

    2017-07-01

    One-third of landfill waste of refinery plant in Thailand was spent chloride zeolite, which wastes a huge of land, cost and time for handling. Toward zero waste to landfill, this study was aimed at determining an effective method for recycling zeolite waste by comparing the chemical process with the electrochemical process. To investigate the optimum conditions of both processes, concentration of chemical solution and reaction time were carried out for the former, while the latter varied in term of current density, initial pH of water, and reaction time. The results stated that regenerating zeolite waste from refinery industry in Thailand should be done through the chemical process with alkaline solution because it provided the best chloride adsorption efficiency with cost the least. A successful recycling will be beneficial not only in reducing the amount of landfill waste but also in reducing material and disposal costs and consumption of natural resources as well.

  16. Treatment of oily wastewater of a gas refinery by electrocoagulation using aluminum electrodes.

    PubMed

    Saeedi, Mohesn; Khalvati-Fahlyani, Amin

    2011-03-01

    Oily wastewaters are the most important discharges of gas refineries from an environmental point-of-view. In the present study, treatment of gas refinery oily wastewater by electrocoagulation using aluminum electrodes was investigated. The effects of electrode distance, initial pH, sodium sulfate (Na2SO4) as a supporting electrolyte, polyaluminum chloride dosage as a coagulant aid, and current density on the efficiency of chemical oxygen demand (COD) removal were examined. The results revealed that the COD removal rate increases by applying more current density and polyaluminum chloride and, to a lesser extent, Na2SO4 dosage. The results also showed that 97% COD can be removed at optimum operational conditions. Specific electrical energy consumption could be reduced from 19.48 kWh (kg COD removal)(-1) to 11.057 kWh (kg COD removal)(-1) using Na2SO4 as a supporting electrolyte. Gas chromatographic analysis of raw and treated wastewater also revealed that most normal hydrocarbons (nearly 99%) were removed during the electrocoagulation process.

  17. Enrichment and characterization of hydrocarbon-degrading bacteria from petroleum refinery waste as potent bioaugmentation agent for in situ bioremediation.

    PubMed

    Sarkar, Poulomi; Roy, Ajoy; Pal, Siddhartha; Mohapatra, Balaram; Kazy, Sufia K; Maiti, Mrinal K; Sar, Pinaki

    2017-10-01

    Intrinsic biodegradation potential of bacteria from petroleum refinery waste was investigated through isolation of cultivable strains and their characterization. Pseudomonas and Bacillus spp. populated the normal cultivable taxa while prolonged enrichment with hydrocarbons and crude oil yielded hydrocarbonoclastic bacteria of genera Burkholderia, Enterobacter, Kocuria, Pandoraea, etc. Strains isolated through enrichment showed assemblages of superior metabolic properties: utilization of aliphatic (C6-C22) and polyaromatic compounds, anaerobic growth with multiple terminal electron acceptors and higher biosurfactant production. Biodegradation of dodecane was studied thoroughly by GC-MS along with detection of gene encoding alkane hydroxylase (alkB). Microcosms bioaugmented with Enterobacter, Pandoraea and Burkholderia strains showed efficient biodegradation (98% TPH removal) well fitted in first order kinetic model with low rate constants and decreased half-life. This study proves that catabolically efficient bacteria resides naturally in complex petroleum refinery wastes and those can be useful for bioaugmentation based bioremediation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Verification of the FBR fuel bundle-duct interaction analysis code BAMBOO by the out-of-pile bundle compression test with large diameter pins

    NASA Astrophysics Data System (ADS)

    Uwaba, Tomoyuki; Ito, Masahiro; Nemoto, Junichi; Ichikawa, Shoichi; Katsuyama, Kozo

    2014-09-01

    The BAMBOO computer code was verified by results for the out-of-pile bundle compression test with large diameter pin bundle deformation under the bundle-duct interaction (BDI) condition. The pin diameters of the examined test bundles were 8.5 mm and 10.4 mm, which are targeted as preliminary fuel pin diameters for the upgraded core of the prototype fast breeder reactor (FBR) and for demonstration and commercial FBRs studied in the FaCT project. In the bundle compression test, bundle cross-sectional views were obtained from X-ray computer tomography (CT) images and local parameters of bundle deformation such as pin-to-duct and pin-to-pin clearances were measured by CT image analyses. In the verification, calculation results of bundle deformation obtained by the BAMBOO code analyses were compared with the experimental results from the CT image analyses. The comparison showed that the BAMBOO code reasonably predicts deformation of large diameter pin bundles under the BDI condition by assuming that pin bowing and cladding oval distortion are the major deformation mechanisms, the same as in the case of small diameter pin bundles. In addition, the BAMBOO analysis results confirmed that cladding oval distortion effectively suppresses BDI in large diameter pin bundles as well as in small diameter pin bundles.

  19. Cancer incidence of workers in the Swedish petroleum industry.

    PubMed Central

    Järvholm, B; Mellblom, B; Norrman, R; Nilsson, R; Nordlinder, R

    1997-01-01

    OBJECTIVES: To estimate the risk of cancer due to occupational exposure to petroleum products in the Swedish transport and refinery industries. METHODS: In a retrospective cohort study the cancer incidence in 4128 men and 191 women, who had worked for at least one year in the petroleum industry, was compared with the incidence in the general population. The job titles and employment times for each person were found in personal files in the industries. The men had on average worked in jobs exposed to petroleum for 11.6 years at the end of the observation period. The cases of cancer were identified by record linkage with the Swedish cancer register. RESULTS: In total there were 146 cases of cancer v 157.6 expected (standardised mortality ratio (SMR) 0.93 90% confidence interval (90% CI) 0.80 to 1.1). Operators at refineries had an increased risk of leukaemia (6 cases v 1.7 expected, 90% CI of relative risk (RR) 1.5 to 7.0). Five of the six cases had started to work at the refineries in the 1950s or later. No other significantly increased risk of cancer was found. Distribution workers had a decreased incidence of lung cancer (no cases, 90% CI of RR 0 to 0.4). CONCLUSIONS: Operators at Swedish refineries had an increased risk of leukaemia. A possible cause is exposure to benzene. There was no increased risk of leukaemia in distribution workers. Distribution workers had a decreased risk of lung cancer. PMID:9423584

  20. Selenium biogeochemistry in the San Francisco Bay estuary: changes in water column behavior

    NASA Astrophysics Data System (ADS)

    Cutter, Gregory A.; Cutter, Lynda S.

    2004-11-01

    The cycling of dissolved selenium was examined in the North San Francisco Bay estuary using 5 surface water transects from the Pacific Ocean (Golden Gate) to the Sacramento and San Joaquin Rivers, monthly river sampling, and three collections of oil refinery effluents during 1997-2000. By combining these data with earlier results from the mid-1980s, a nearly 16-year record of riverine fluxes, estuarine processes, and anthropogenic inputs was obtained. The Sacramento River concentrations and speciation have remained unchanged over the period, and while the speciation of selenium in the San Joaquin is similar, its dissolved selenium concentrations have decreased by almost one half. More significantly, the concentration of selenium from oil refinery discharges to the mid-estuary has decreased 66% and its speciation changed from one dominated by selenite (66%) to one that is only 14% selenite. This change in refinery effluents occurred while our study was underway, with the result being a pronounced decrease in selenite concentrations (82%), and hence total dissolved selenium, in the mid-estuary. A companion study found that sediment/water exchange is a minor flux to the estuary, and hence selenium inputs from the Sacramento River, as well as refineries during low flow (summer, fall) periods exert major controls on the dissolved selenium behavior in this estuary. Nevertheless, in situ processes associated with organic matter cycling (photosynthesis and respiration) still modify the distributions and internal transformations of dissolved selenium, notably organic selenide.

  1. Economic impacts of bio-refinery and resource cascading systems: an applied general equilibrium analysis for Poland.

    PubMed

    Ignaciuk, Adriana M; Sanders, Johan

    2007-12-01

    Due to more stringent energy and climate policies, it is expected that many traditional chemicals will be replaced by their biomass-based substitutes, bio-chemicals. These innovations, however, can influence land allocation since the demand for land dedicated to specific crops might increase. Moreover, it can have an influence on traditional agricultural production. In this paper, we use an applied general equilibrium framework, in which we include two different bio-refinery processes and incorporate so-called cascading mechanisms. The bio-refinery processes use grass, as one of the major inputs, to produce bio-nylon and propane-diol (1,3PDO) to substitute currently produced fossil fuel-based nylon and ethane-diol. We examine the impact of specific climate policies on the bioelectricity share in total electricity production, land allocation, and production quantities and prices of selected commodities. The novel technologies become competitive, with an increased stringency of climate policies. This switch, however, does not induce a higher share of bioelectricity. The cascade does stimulate the production of bioelectricity, but it induces more of a shift in inputs in the bioelectricity sector (from biomass to the cascaded bio-nylon and 1, 3PDO) than an increase in production level of bioelectricity. We conclude that dedicated biomass crops will remain the main option for bioelectricity production: the contribution of the biomass systems remains limited. Moreover, the bioelectricity sector looses a competition for land for biomass production with bio-refineries.

  2. Adsorption of SOx and NOx in activated viscose fibers.

    PubMed

    Plens, Ana Carolina O; Monaro, Daniel L G; Coutinho, Aparecido R

    2015-01-01

    SOx and NOx are emissions resulting from combustion processes and are the main agents that contribute to the formation of acid rain, which causes harm to humans and the environment. Several techniques for removing these pollutants are applied in i.e. oil refineries, thermoelectric that use petroleum oils and vehicular pollution. Among these, highlight the adsorption of contaminants by the usage of activated carbon fibers and activated carbon, which are characterized by high surface area and uniform distribution of pores, providing appropriate conditions for application in processes of removing environmental contaminants. In the present work, activated viscose fibers (AVF) were prepared and applied in adsorption experiments of NO and SO2. The materials produced showed high values of surface area, with a predominance of micro pores with diameters in the range of 1.0 nm. The AVF had satisfactory performance in the removal of contaminants and are compatible with other synthetic fibers. Thus, the formation of active sites of carbon provides contaminants adsorption, demonstrating that carbon fibers cloth can be applied for the removal of pollutants.

  3. Large eccentric laser angioplasty catheter

    NASA Astrophysics Data System (ADS)

    Taylor, Kevin D.; Reiser, Christopher

    1997-05-01

    In response to recent demand for increased debulking of large diameter coronary vascular segments, a large eccentric catheter for excimer laser coronary angioplasty has been developed. The outer tip diameter is 2.0 mm and incorporates approximately 300 fibers of 50 micron diameter in a monorail- type percutaneous catheter. The basic function of the device is to ablate a coronary atherosclerotic lesion with 308 nm excimer laser pulses, while passing the tip of the catheter through the lesion. By employing multiple passes through the lesion, rotating the catheter 90 degrees after each pass, we expect to create luminal diameters close to 3 mm with this device. Design characteristics, in-vitro testing, and initial clinical experience is presented.

  4. Computer model for refinery operations with emphasis on jet fuel production. Volume 1: Program description

    NASA Technical Reports Server (NTRS)

    Dunbar, D. N.; Tunnah, B. G.

    1978-01-01

    A FORTRAN computer program is described for predicting the flow streams and material, energy, and economic balances of a typical petroleum refinery, with particular emphasis on production of aviation turbine fuel of varying end point and hydrogen content specifications. The program has provision for shale oil and coal oil in addition to petroleum crudes. A case study feature permits dependent cases to be run for parametric or optimization studies by input of only the variables which are changed from the base case.

  5. Computer model for refinery operations with emphasis on jet fuel production. Volume 3: Detailed systems and programming documentation

    NASA Technical Reports Server (NTRS)

    Dunbar, D. N.; Tunnah, B. G.

    1978-01-01

    The FORTRAN computing program predicts flow streams and material, energy, and economic balances of a typical petroleum refinery, with particular emphasis on production of aviation turbine fuels of varying end point and hydrogen content specifications. The program has a provision for shale oil and coal oil in addition to petroleum crudes. A case study feature permits dependent cases to be run for parametric or optimization studies by input of only the variables which are changed from the base case.

  6. Test plan: the Czechowice Oil Refinery bioremediation demonstration of a process waste lagoon

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Altman, D.J.; Lombard, K.H.; Hazen, T.C.

    1997-03-31

    The remediation strategies that will be applied at the Czechowice Oil Refinery waste lagoon in Czechowice, Poland are designed, managed, and implemented under the direction of the Westinghouse Savannah River Company (WSRC) for the United States Department of Energy (DOE). WSRC will be assisted in the demonstration by The Institute for Ecology of Industrial Areas (IETU). This collaboration between IETU and DOE will provide the basis for international technology transfer of new and innovative remediation technologies that can be applied in Poland and the Eastern European Region as well.

  7. The Design of Pressure Safety Systems in the Alumina Industry

    NASA Astrophysics Data System (ADS)

    Haneman, Brady

    The alumina refinery presents the designer with multiple challenges. For a given process flowsheet, the mechanical equipment installed must be routinely inspected and maintained. Piping systems must also be inspected routinely for signs of erosion and/or corrosion. Rapid deposits of chemical species such as lime, silica, and alumina on equipment and piping need special consideration in the mechanical design of the facilities, such that fluid flows are not unduly interrupted. Above and beyond all else, the process plant must be a safe place of work for refinery personnel.

  8. Status and trends of bottomland hardwood forests in the mid-Atlantic Region

    Treesearch

    Anita Rose; Steve Meadows

    2016-01-01

    Bottomland hardwood forests cover approximately 2.9 million acres of the Coastal Plain and Piedmont region of Virginia and North Carolina. As of 2014, 59 percent of bottomland hardwood forests were in the large-diameter stand-size class. Between 2002 and 2014, area of large-diameter sized stands increased, while that of medium- and small-diameter stands decreased,...

  9. Determination of heavy polycyclic aromatic hydrocarbons by non-aqueous reversed phase liquid chromatography: Application and limitation in refining streams.

    PubMed

    Panda, Saroj K; Muller, Hendrik; Al-Qunaysi, Thunayyan A; Koseoglu, Omer R

    2018-01-19

    The heavy polycyclic aromatic hydrocarbons (HPAHs) cause detrimental effects to hydrocracker operations by deactivating the catalysts and depositing in the downstream of the reactor/ exchangers. Therefore, it is essential to continuously monitor the accumulation of HPAHs in a hydrocracker unit. To accurately measure the concentration of HPAHs, the development of a fast and reliable analytical method is inevitable. In this work, an analytical method based on non-aqueous reversed phase chromatography in combination with high resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was developed. As a first step, five different types of stationary phases were evaluated for the separation of HPAHs in non-aqueous mode and the best suited phase was further used for the fractionation of HPAHs in a fractionator bottom sample obtained from a refinery hydrocracker unit. The eight major fractions or peaks obtained from the separation were further characterized by UV spectroscopy and FT-ICR MS and the compounds in the fractions were tentatively confirmed as benzoperylene, coronene, methylcoronene, naphthenocoronene, benzocoronene, dibenzoperylene, naphthocoronene and ovalene. The developed liquid chromatography method can be easily adapted in a refinery laboratory for the quantitation of HPAHs in hydrocracking products. The method was further tested to check the interference of sulfur aromatics and/or large alkylated aromatic hydrocarbons on the determination of HPAHs in hydrocracking products. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. High Revision Rate for Large-head Metal-on-metal THA at a Mean of 7.1 Years: A Registry Study.

    PubMed

    Seppänen, Matti; Laaksonen, Inari; Pulkkinen, Pekka; Eskelinen, Antti; Puhto, Ari-Pekka; Kettunen, Jukka; Leskinen, Jarkko; Manninen, Mikko; Mäkelä, Keijo

    2018-06-01

    Large-diameter head metal-on-metal (MoM) THA has largely been abandoned as a result of higher than anticipated revision rates. However, the majority of these implants are still in situ. Although earlier reports from the Finnish Arthroplasty Register noted similar short-term survivorship between large-diameter head MoM THA and conventional cemented THA, longer term survivorship of this population is unclear. Although reported revision rates for this implant group have been high, the majority of these implants have not been revised and followup is important to improve long-term management. The purposes of this study were (1) to compare the 10-year competing risk survivorship of large-diameter head MoM THA with the survivorship of conventional THA in the Finnish Arthroplasty Register; (2) to report the large-diameter head MoM THA survival at the manufacturer/brand level; and (3) to identify the most common reasons for revision of large-diameter head MoM THA in the Finnish Arthroplasty Register. The six most commonly used large-diameter head (≥ 38 mm) MoM THA devices in Finland between years 2004 and 2013 were selected (n = 10,959 implants). The completeness of the Finnish Registry is > 95% in primary THA and patients are censored from the date of death or at the point of emigration; followup continued until the end of 2015. The conventional THA control group consisted of the two most frequently used devices (Vision/Bimetric and ABG II/ABG II) with metal-on-polyethylene or ceramic-on-ceramic bearing surfaces implanted between 2002 and 2013 (n = 5177). The study group was formed by selecting all pairs of large-diameter head MoM and reference THA protheses within the same age group ( < 49, 50-54, 55-59, 60-64, 65-69, 70-74, and 75+ years), sex, diagnosis (osteoarthritis, other), and hospital yearly operation count (< 100 operations yearly, ≥ 100 operations yearly); 5166 matched pairs were identified. Revision for any reason was considered as the failure endpoint of followup. Implant survival (the proportion not revised) was calculated from corresponding cumulative incidence function adjusted for patient death as a competing event for revision. Large-diameter head MoM implant group revision hazard ratios with 95% confidence intervals were estimated with age group, sex, diagnosis, and hospital yearly operation count as confounding factors in a Cox regression model. Ten-year survivorship free from all-cause revision was lower for THAs that used a large-diameter femoral head than it was for the control group of conventional THA (83% [95% confidence interval {CI}, 82%-84%] versus 92% [95% CI, 91%-93%]). At the implant level, every large-diameter head MoM THA had a higher risk for revision compared with the conventional THA control group from the fourth postoperative year onward. The highest survival of MoM THA was 88% (95% CI, 86%-90%) for the ReCap/Bimetric and the lowest survival was 46% (95% CI, 41%-51%) for the recalled ASR with either the Summit® or Corail® stem. The most common revision reason in the MoM THA group was adverse reaction to metal debris, whereas dislocation was predominant in the conventional THA control group. The revision rate for all large-diameter head MoM THAs in this timeframe in the Finnish Arthroplasty Register is unacceptably high and in our view supports the decision to abandon their use. In agreement with the directives of other national organizations, we recommend regular followup of all patients with large-diameter head MoM THA. Based on our results, strict guidelines for followup should be maintained over the lifetime of the implant to assess patient symptoms and recommend revision when indicated. Level III, therapeutic study.

  11. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Morrow, William R.; Marano, John; Sathaye, Jayant

    2013-02-01

    Adoption of efficient process technologies is an important approach to reducing CO 2 emissions, in particular those associated with combustion. In many cases, implementing energy efficiency measures is among the most cost-effective approaches that any refiner can take, improving productivity while reducing emissions. Therefore, careful analysis of the options and costs associated with efficiency measures is required to establish sound carbon policies addressing global climate change, and is the primary focus of LBNL’s current petroleum refining sector analysis for the U.S. Environmental Protection Agency. The analysis is aimed at identifying energy efficiency-related measures and developing energy abatement supply curves andmore » CO 2 emissions reduction potential for the U.S. refining industry. A refinery model has been developed for this purpose that is a notional aggregation of the U.S. petroleum refining sector. It consists of twelve processing units and account s for the additional energy requirements from steam generation, hydrogen production and water utilities required by each of the twelve processing units. The model is carbon and energy balanced such that crud e oil inputs and major refinery sector outputs (fuels) are benchmarked to 2010 data. Estimates of the current penetration for the identified energy efficiency measures benchmark the energy requirements to those reported in U.S. DOE 2010 data. The remaining energy efficiency potential for each of the measures is estimated and compared to U.S. DOE fuel prices resulting in estimates of cost- effective energy efficiency opportunities for each of the twelve major processes. A combined cost of conserved energy supply curve is also presented along with the CO 2 emissions abatement opportunities that exist in the U.S. petroleum refinery sector. Roughly 1,200 PJ per year of primary fuels savings and close to 500 GWh per y ear of electricity savings are potentially cost-effective given U.S. DOE fuel price forecasts. This represents roughly 70 million metric tonnes of CO 2 emission reductions assuming 2010 emissions factor for grid electricity. Energy efficiency measures resulting in an additional 400 PJ per year of primary fuels savings and close to 1,700 GWh per year of electricity savings, and an associated 24 million metric tonnes of CO 2 emission reductions are not cost-effective given the same assumption with respect to fuel prices and electricity emissions factors. Compared to the modeled energy requirements for the U.S. petroleum refining sector, the cost effective potential represents a 40% reduction in fuel consumption and a 2% reduction in electricity consumption. The non-cost-effective potential represents an additional 13% reduction in fuel consumption and an additional 7% reduction in electricity consumption. The relative energy reduction potentials are mu ch higher for fuel consumption than electricity consumption largely in part because fuel is the primary energy consumption type in the refineries. Moreover, many cost effective fuel savings measures would increase electricity consumption. The model also has the potential to be used to examine the costs and benefits of the other CO 2 mitigation options, such as combined heat and power (CHP), carbon capture, and the potential introduction of biomass feedstocks. However, these options are not addressed in this report as this report is focused on developing the modeling methodology and assessing fuels savings measures. These opportunities to further reduce refinery sector CO 2 emissions and are recommended for further research and analysis.« less

  12. Use of a specially designed partially covered self-expandable metal stent (PSEMS) with a 40-mm diameter for the treatment of upper gastrointestinal suture or staple line leaks in 11 cases.

    PubMed

    Fischer, Andreas; Bausch, Dirk; Richter-Schrag, Hans-Juergen

    2013-02-01

    The use of self-expandable stents to treat postoperative leaks and fistula in the upper gastrointestinal (GI) tract is an established treatment for leaks of the upper GI tract. However, lumen-to-stent size discrepancies (i.e., after sleeve gastrectomy or esophageal resection) may lead to insufficient sealing of the leaks requiring further surgical intervention. This is mainly due to the relatively small diameter (≤30 mm) of commonly used commercial stents. To overcome this problem, we developed a novel partially covered stent with a shaft diameter of 36 mm and a flare diameter of 40 mm. From September 2008 to September 2010, 11 consecutive patients with postoperative leaks were treated with the novel large diameter stent (gastrectomy, n = 5; sleeve gastrectomy, n = 2; fundoplication after esophageal perforation, n = 2; Roux-en-Y gastric bypass, n = 1; esophageal resection, n = 1). Treatment with commercially available stents (shaft/flare: 23/28 mm and 24/30 mm) had been unsuccessful in three patients before treatment with the large diameter stent. Due to dislocation, the large diameter stent was anchored in four patients (2× intraoperatively with transmural sutures, 2× endoscopically with transnasally externalized threads). Treatment was successful in 11 of 11 patients. Stent placement and removal was easy and safe. The median residence time of the stent was 24 (range, 18-41) days. Stent dislocation occurred in four cases (36 %). It was treated by anchoring the stent. Mean follow-up was 25 (range, 14-40) months. No severe complication occurred during or after intervention and no patient was dysphagic. Using the novel large diameter, partially covered stent to seal leaks in the upper GI tract is safe and effective. The large diameter of the stent does not seem to injure the wall of the upper GI tract. However, stent dislocation sometimes requires anchoring of the stent with sutures or transnasally externalized threads.

  13. Seismic Scenario in the Acambay Graben and Possible Affectations in the Miguel Hidalgo Refinery

    NASA Astrophysics Data System (ADS)

    Valderrama Membrillo, S.; Aguirre, J.

    2015-12-01

    In this paper we presented synthetic acceleration records in the Miguel Hidalgo refinery, Hidalgo due to a seismic scenario originated in the graben Acambay, such as occurred in 1912 (70 km distance to it). This earthquake had a magnitude of 6.9 and caused extensive damage, according to reports caused 164 deaths and numerous houses collapsing. To simulate the event of M = 6.9 we used the empirical Greeńs function method proposed by Irikura (1986). Due to the low seismic activity we have not any small earthquake record or an "element earthquake" so that we generated a synthetic seismogram of M = 4.1 to be used as empirical Greeńs function. The seismogram was constructed in two parts. For low frequencies we constructed from cross-correlations of seismic noise, while for high frequencies we made a stochastic simulation. Subsequently, we applied a "matched filter" to join the two frequency bands of synthetic earthquake. For the construction of seismic scenario the method of Irikura (1986) was used. We consider a square fault of 47.75 km long, a radial rupture propagation, rupture velocity of 3.06 m/s, and with the following focal mechanism: strike of 280°, dip of 66 ° and rake of -138 °. With these parameters we obtained the synthetic seismograms. Since there was not any observed earthquake to validate the model, the 1912 event was simulated and then from relationships of intensity (obtained Wald et al.,2005; Sandoval et al., 2013; and Arias, 1969), we estimated the Modified Mercalli Intensity (MMI) for the refinery. We compare our result with isoseismal map obtained by Suter et al. (1996) for the earthquake of 1912. In agreement with Suter, our results shown a MMI V-VI for the Miguel Hidalgo refinery. With this qualitative validation we search the seismic scenario with the higher accelerations and from this synthetic seismogram, we obtained parameters that are of interest in engineering to estimate the possible affectations to the Miguel Hidalgo refinery, such as: PGA, PGV, response spectra, dominant period of significant duration event, and estimated MMI.

  14. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Caroline E. Burgess Clifford; Andre Boehman; Chunshan Song

    2006-05-17

    This report summarizes the accomplishments toward project goals during the first six months of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. Characterization of the gasolinemore » fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Combustion and characterization of fuel oil indicates that the fuel is somewhere in between a No. 4 and a No. 6 fuel oil. Emission testing indicates the fuel burns similarly to these two fuels, but trace metals for the coal-based material are different than petroleum-based fuel oils. Co-coking studies using cleaned coal are highly reproducible in the pilot-scale delayed coker. Evaluation of the coke by Alcoa, Inc. indicated that while the coke produced is of very good quality, the metals content of the carbon is still high in iron and silica. Coke is being evaluated for other possible uses. Methods to reduce metal content are being evaluated.« less

  15. Evidencing lead deposition at the urban scale using "short-lived" isotopic signatures of the source term (Pb-Zn refinery)

    NASA Astrophysics Data System (ADS)

    Franssens, Matthias; Flament, Pascal; Deboudt, Karine; Weis, Dominique; Perdrix, Espéranza

    2004-09-01

    To demonstrate the ability of the lead isotope signature technique to evidence the spatial extent of an industrial Pb deposition plume at a local scale, dry deposition of lead in the urban environment of a Pb-Zn refinery was investigated, as a study case, using transient ("short-lived") isotopic signatures of the industrial source. Sampling campaigns were achieved in representative weather conditions, on an 8-h basis. Dry deposition rates measured downwind from refinery emissions (≈102-103 μg Pb m-2 h-1), cross-sectionally in a 3-5 km radius area around the plant, represent 10-100 times the urban background dry fallout, measured upwind, as well as fallout measured near other potential sources of anthropogenic Pb. The Pb-Zn refinery isotopic signature (approx. 1.100<206Pb/207Pb<1.135) is made identifiable, using the same set of Pb and Zn ores for 2 days before sampling and during field experiments, by agreement with the executive staff of the plant. This source signature is less radiogenic than signatures of urban background Pb aerosols (1.155<206Pb/207Pb<1.165) and minor sources of Pb aerosols (1.147<206Pb/207Pb<1.165). By a simple binary mixing model calculation, we established the extension of the industrial Pb deposition plume. Fifty to eighty percents of total lead settled by the dry deposition mode, 3-4 km away from the refinery, still have an industrial origin. That represents from 40 to 80 μg Pb m-2 h-1, in an area where the blood lead level exceeds 100 μg Pb l-1 for 30% of men and 12% of women living there. We demonstrate here that stable Pb isotope analysis is able to evidence the Pb dry deposition plume in stabilised aerodynamic conditions, using a short-lived source term, suggesting that this methodology is able to furnish valuable data to validate industrial Pb aerosols dispersion models, at the urban scale.

  16. Fresnel Lens Characterization for Potential Use in an Unpiloted Atmospheric Vehicle DIAL Receiver System

    NASA Technical Reports Server (NTRS)

    Fastig, Shlomo; Deoung, Russell J.

    1998-01-01

    Acrylic plastic Fresnel lenses are very light and can have large diameters. Such lenses could be used in lidar telescope receivers if the focal spot is not too large or distorted. This research effort characterizes the focal spot diameter produced by a Fresnel lens with a diameter of 30.5 cm (12 in.). It was found that the focal spot diameter varied from 1.2 mm at 750 nm to 1.6 mm at 910 nm. The focal spot was irregular and not easily described by a Gaussian profile.

  17. Brown rot in inner heartwood: why large logs support characteristics saproxylic beetle assemblages of conservation concern

    Treesearch

    Marie Yee; Simon J. Grove; Alastair M.M. Richardson; Caroline L. Mohammed

    2006-01-01

    It is not clear why large diameter logs generally host saproxylic beetle assemblages that are different from those of small diameter logs. In a study in Tasmanian wet eucalypt forest, two size-classes of Eucalyptus obliqua logs (>100cm and 30-60cm diameter) were destructively sampled to assess their beetle fauna and the associations of this fauna...

  18. Measuring Diameters Of Large Vessels

    NASA Technical Reports Server (NTRS)

    Currie, James R.; Kissel, Ralph R.; Oliver, Charles E.; Smith, Earnest C.; Redmon, John W., Sr.; Wallace, Charles C.; Swanson, Charles P.

    1990-01-01

    Computerized apparatus produces accurate results quickly. Apparatus measures diameter of tank or other large cylindrical vessel, without prior knowledge of exact location of cylindrical axis. Produces plot of inner circumference, estimate of true center of vessel, data on radius, diameter of best-fit circle, and negative and positive deviations of radius from circle at closely spaced points on circumference. Eliminates need for time-consuming and error-prone manual measurements.

  19. Gene expression profiles in peripheral blood mononuclear cells of Chinese nickel refinery workers with high exposures to nickel and control subjects

    PubMed Central

    Arita, Adriana; Muñoz, Alexandra; Chervona, Yana; Niu, Jingping; Qu, Qingshan; Zhao, Najuan; Ruan, Ye; Kiok, Kathrin; Kluz, Thomas; Sun, Hong; Clancy, Hailey A.; Shamy, Magdy; Costa, Max

    2012-01-01

    Background Occupational exposure to nickel (Ni) is associated with an increased risk of lung and nasal cancers. Ni compounds exhibit weak mutagenic activity, alter the cell’s epigenetic homeostasis, and activate signaling pathways. However, changes in gene expression associated with Ni exposure have only been investigated in vitro. This study was conducted in a Chinese population to determine whether occupational exposure to Ni was associated with differential gene expression profiles in the peripheral blood mononuclear cells (PBMCs) of Ni-refinery workers when compared to referents. Methods Eight Ni-refinery workers and ten referents were selected. PBMC RNA was extracted and gene expression profiling was performed using Affymetrix exon arrays. Differentially expressed genes between both groups were identified in a global analysis. Results There were a total of 2756 differentially expressed genes (DEG) in the Ni-refinery workers relative to the control subjects (FDR adjusted p<0.05) with 770 up-regulated genes and 1986 down-regulated genes. DNA repair and epigenetic genes were significantly overrepresented (p< 0.0002) among the DEG. Of 31 DNA repair genes, 29 were repressed in the high exposure group and two were overexpressed. Of the 16 epigenetic genes 12 were repressed in the high exposure group and 4 were overexpressed. Conclusions The results of this study indicate that occupational exposure to Ni is associated with alterations in gene expression profiles in PBMCs of subjects. Impact Gene expression may be useful in identifying patterns of deregulation that precede clinical identification of Ni-induced cancers. PMID:23195993

  20. Element composition of insoluble fraction of aerosols in snow in the vicinity of oil chemistry refinery (Pavlodar City, Kazakhstan) and petrochemical plant (Tomsk City, Russia)

    NASA Astrophysics Data System (ADS)

    Talovskaya, Anna V.; Filimonenko, Ekaterina A.; Yazikov, Egor G.; Shakhova, Tatyana S.; Parygina, Irina A.

    2015-11-01

    Tomsk petrochemical plant (Russia) and Pavlodar oil chemistry refinery (Kazakhstan) are the sources of air contamination in Tomsk and Pavlodar respectively. Therefore, it is very important to study the level of air contamination with particulate matter as well as ultimate composition of these particles. Disposable solid particles fall out to the snow cover, so snow is an accumulator of the particles. The article deals with the study results of dust load and concentrations of Br, Sb, La, Ce, Sm and Nd in insoluble fraction of aerosols in snow in the vicinity of Pavlodar oil chemistry refinery and Tomsk petrochemical plant. The instrumental neutron activation analysis was used for the ultimate composition detection. Results were shown that the dust load in the vicinity of Tomsk petrochemical plant is higher than in Pavlodar. We have detected high concentrations of La, Br and Sm in insoluble fraction of aerosols in snow in the vicinity of Pavlodar refinery and high concentrations of Sb and Ce in Tomsk. Moreover, we have detected high Br concentration in insoluble fraction of aerosols in snow of the vicinity of both plants. Gas burning on the flares of these enterprises is likely a potential source of Br. La to light lanthanoids ratio have shown La is of anthropogenic origin. In addition, enrichment factor estimation reflects an anthropogenic origin of La, Sm, Br, Ce and Sb as well. These elements might be emitted from different production facilities of the plants.

  1. OMI air-quality monitoring over the Middle East

    NASA Astrophysics Data System (ADS)

    Barkley, Michael P.; González Abad, Gonzalo; Kurosu, Thomas P.; Spurr, Robert; Torbatian, Sara; Lerot, Christophe

    2017-04-01

    Using Ozone Monitoring Instrument (OMI) trace gas vertical column observations of nitrogen dioxide (NO2), formaldehyde (HCHO), sulfur dioxide (SO2), and glyoxal (CHOCHO), we have conducted a robust and detailed time series analysis to assess changes in local air quality for over 1000 locations (focussing on urban, oil refinery, oil port, and power plant targets) over the Middle East for 2005-2014. Apart from NO2, which is highest over urban locations, average tropospheric column levels of these trace gases are highest over oil ports and refineries. The highest average pollution levels over urban settlements are typically in Bahrain, Kuwait, Qatar, and the United Arab Emirates. We detect 278 statistically significant and real linear NO2 trends in total. Over urban areas NO2 increased by up to 12 % yr-1, with only two locations showing a decreasing trend. Over oil refineries, oil ports, and power plants, NO2 increased by about 2-9 % yr-1. For HCHO, 70 significant and real trends were detected, with HCHO increasing by 2-7 % yr-1 over urban settlements and power plants and by about 2-4 % yr-1 over refineries and oil ports. Very few SO2 trends were detected, which varied in direction and magnitude (23 increasing and 9 decreasing). Apart from two locations where CHOCHO is decreasing, we find that glyoxal tropospheric column levels are not changing over the Middle East. Hence, for many locations in the Middle East, OMI observes a degradation in air quality over 2005-2014. This study therefore demonstrates the capability of OMI to generate long-term air-quality monitoring at local scales over this region.

  2. The guava tree as bioindicator during the process of fuel replacement of an oil refinery.

    PubMed

    Silva, Simone F; Meirelles, Sérgio T; Moraes, Regina M

    2013-05-01

    This study was performed to verify whether the exchange of the fuel used in the boilers of a crude oil refinery located in Cubatão (SE Brazil) would result in alterations on gas exchange, growth and leaf injuries in saplings of Psidium guajava 'Paluma'. The purpose of the refinery was to reduce the SO2 emission, but using natural gas as fuel could increase the concentrations of O3 precursors in the atmosphere. Thus a biomonitoring was performed with a native species sensitive to O3. The plants were exposed in five areas (CM1, CM5, CEPEMA, Centro, and RP) at different distances to the refinery, both before and after the fuel exchange. We performed six exposures under environmental conditions, with length of ca. 90 days each. With the utilization of natural gas, the saplings presented reductions in carbon assimilation rate under saturating light conditions (Asat, μmolCO2m(-2)s(-1)) and the stomatal conductance (gs, molH2Om(-2)s(-1)), and increase in height, number of leaves, and dry mass of leaves and shoots. There were also reductions in root dry mass and in the root/shoot ratio. The saplings also presented O3-induced leaf injuries. The responses of P. guajava 'Paluma' were altered after the fuel exchange as a result of a new combination of pollutants in the atmosphere. The fuel exchange has not resulted in environmental benefit to the surrounding forest; it has only altered the contamination profile of the region. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. Respiratory, allergy and eye problems in bagasse-exposed sugar cane workers in Costa Rica.

    PubMed

    Gascon, Mireia; Kromhout, Hans; Heederik, Dick; Eduard, Wijnand; van Wendel de Joode, Berna

    2012-05-01

    To evaluate bagasse (sugar cane fibres) and microbiological exposure among sugar cane refinery workers in Costa Rica and its relationships with respiratory, allergy and eye problems. Ventilatory lung function and total serum IgE were measured in 104 sugar cane workers in five departments at one refinery before the harvesting season, and repeated for 77 of the workers at the end of the season. Information on the prevalence of respiratory and other symptoms was collected with a standardised questionnaire. During the harvesting season, inhalable dust, endotoxin and mould levels were measured among 74 randomly selected sugar cane workers across departments. During the harvesting season, dust levels were relatively high in some departments, while endotoxin and mould levels were around background levels. Workers' ventilatory lung function differed between departments before, but not during the harvesting season or between seasons. During the harvesting season, the prevalence of wheeze and eye problems almost doubled in workers exposed to bagasse and other types of dust, whereas shortness of breath and rhinitis increased only in bagasse-exposed workers. Reporting wheeze and shortness of breath was positively associated with the number of years working at the refinery, suggesting a long-term health effect. In this refinery, the differences in workers' ventilatory lung function before the harvesting season are unlikely to be explained by bagasse exposure. However, the increase in reported symptoms (wheeze, shortness of breath, eye problems and rhinitis) over the season is likely due to irritation by dust, in particular bagasse, rather than microbiological agents.

  4. RBAC Driven Least Privilege Architecture For Control Systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hull, Julie; Markham, Mark

    The concept of role based access control (RBAC) within the IT environment has been studied by researchers and was supported by NIST (circa 1992). This earlier work highlighted the benefits of RBAC which include reduced administrative workload and policies which are easier to analyze and apply. The goals of this research were to expand the application of RBAC in the following ways. Apply RBAC to the control systems environment: The typical RBAC model within the IT environment is used to control a user’s access to files. Within the control system environment files are replaced with measurement (e.g., temperature) and controlmore » (e.g. valve) points organized as a hierarchy of control assets (e.g. a boiler, compressor, refinery unit). Control points have parameters (e.g., high alarm limit, set point, etc.) associated with them. The RBAC model is extended to support access to points and their parameters based upon roles while at the same time allowing permissions for the points to be defined at the asset level or point level directly. In addition, centralized policy administration with distributed access enforcement mechanisms was developed to support the distributed architecture of distributed control systems and SCADA; Extend the RBAC model to include access control for software and devices: The established RBAC approach is to assign users to roles. This work extends that notion by first breaking the control system down into three layers 1) users, 2) software and 3) devices. An RBAC model is then created for each of these three layers. The result is that RBAC can be used to define machine-to-machine policy enforced via the IP security (IPsec) protocol. This highlights the potential to use RBAC for machine-to-machine connectivity within the internet of things; and Enable dynamic policy based upon the operating mode of the system: The IT environment is generally static with respect to policy. However, large cyber physical systems such as industrial controls have various operating modes (start-up, normal operation, emergency, shut-down and maintenance are typical). The policy enforcement architecture must be able to support changes in access permissions as the mode of the control system changes. For example an operator’s role may not allow the operator to shut down a pump during “normal operation” but that same operator role may be given permission to shut down the pump if the refinery transitions to “emergency” mode. The effectiveness of the approach was validated by applying it to the Experion Process Knowledge System. This is a large commercial industrial control system often used to control oil refineries and other assets within the oil and gas sector. As a by-product, other industries using Experion (Pharmaceuticals, Specialty Chemicals, etc.) also benefit from increased security. Policies representative of those that would be used within an oil refinery were created and validated against the RBAC model as implemented in the underlying SQL database. The administration of policy is simplified which in turn makes it practical for security administrators to specify policies which enforce least privilege. The result is a qualitative reduction in risk. The benefits of the enhanced RBAC model are clear and as a result. Honeywell is incorporating portions of the RBAC research into the 2014 release of Experion.« less

  5. Analysis of energy use and CO2 emissions in the U.S. refining sector, with projections for 2025.

    PubMed

    Hirshfeld, David S; Kolb, Jeffrey A

    2012-04-03

    This analysis uses linear programming modeling of the U.S. refining sector to estimate total annual energy consumption and CO(2) emissions in 2025, for four projected U.S. crude oil slates. The baseline is similar to the current U.S. crude slate; the other three contain larger proportions of higher density, higher sulfur crudes than the current or any previous U.S. crude slates. The latter cases reflect aggressive assumptions regarding the volumes of Canadian crudes in the U.S. crude slate in 2025. The analysis projects U.S. refinery energy use 3.7%-6.3% (≈ 0.13-0.22 quads/year) higher and refinery CO(2) emissions 5.4%-9.3% (≈ 0.014-0.024 gigatons/year) higher in the study cases than in the baseline. Refining heavier crude slates would require significant investments in new refinery processing capability, especially coking and hydrotreating units. These findings differ substantially from a recent estimate asserting that processing heavy oil or bitumen blends could increase industry CO(2) emissions by 1.6-3.7 gigatons/year.

  6. Diesel production from Fischer-Tropsch: the past, the present, and new concepts

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dieter Leckel

    2009-05-15

    Fischer-Tropsch synthesis is technically classified into two categories, the high-temperature Fischer-Tropsch (HTFT) and the low-temperature Fischer-Tropsch (LTFT) processes. The criterion for this classification is the operating temperature of the synthesis, which ranges between 310-340{sup o}C for the HTFT process and 210-260{sup o}C for the LTFT process. A Fischer-Tropsch facility can be divided into roughly three sections, synthesis gas (syngas) generation, FT synthesis, and refining of the synthetic crude (syncrude). Fischer-Tropsch refineries differ regarding the product upgrading, and both transportation fuels and chemicals can be produced. Regarding the FT refinery history, the configuration of each refinery also reflects the requirements ofmore » the fuel specification at that time. This paper gives a condensed overview of how Fischer-Tropsch facilities changed during the last 70 years and focuses in particular on the diesel fuel produced. Some conceptual flow schemes are additionally presented with emphasis on the combined upgrading of the high boiling part of the FT product spectrum with liquids derived from coal pyrolysis. 52 refs., 14 figs., 12 tabs.« less

  7. Application of Ozone MBBR Process in Refinery Wastewater Treatment

    NASA Astrophysics Data System (ADS)

    Lin, Wang

    2018-01-01

    Moving Bed Biofilm Reactor (MBBR) is a kind of sewage treatment technology based on fluidized bed. At the same time, it can also be regarded as an efficient new reactor between active sludge method and the biological membrane method. The application of ozone MBBR process in refinery wastewater treatment is mainly studied. The key point is to design the ozone +MBBR combined process based on MBBR process. The ozone +MBBR process is used to analyze the treatment of concentrated water COD discharged from the refinery wastewater treatment plant. The experimental results show that the average removal rate of COD is 46.0%~67.3% in the treatment of reverse osmosis concentrated water by ozone MBBR process, and the effluent can meet the relevant standard requirements. Compared with the traditional process, the ozone MBBR process is more flexible. The investment of this process is mainly ozone generator, blower and so on. The prices of these items are relatively inexpensive, and these costs can be offset by the excess investment in traditional activated sludge processes. At the same time, ozone MBBR process has obvious advantages in water quality, stability and other aspects.

  8. Influence of operating conditions on the air gasification of dry refinery sludge in updraft gasifier

    NASA Astrophysics Data System (ADS)

    Ahmed, R.; Sinnathambi, C. M.

    2013-06-01

    In the present work, details of the equilibrium modeling of dry refinery sludge (DRS) are presented using ASPEN PLUS Simulator in updraft gasifier. Due to lack of available information in the open journal on refinery sludge gasification using updraft gasifier, an evaluate for its optimum conditions on gasification is presented in this paper. For this purpose a Taguchi Orthogonal array design, statistical software is applied to find optimum conditions for DRS gasification. The goal is to identify the most significant process variable in DRS gasification conditions. The process variables include; oxidation zone temperature, equivalent ratio, operating pressure will be simulated and examined. Attention was focused on the effect of optimum operating conditions on the gas composition of H2 and CO (desirable) and CO2 (undesirable) in terms of mass fraction. From our results and finding it can be concluded that the syngas (H2 & CO) yield in term of mass fraction favors high oxidation zone temperature and at atmospheric pressure while CO2 acid gas favor at a high level of equivalent ratio as well as air flow rate favoring towards complete combustion.

  9. Chronic beryllium disease in a precious metal refinery. Clinical epidemiologic and immunologic evidence for continuing risk from exposure to low level beryllium fumes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cullen, M.R.; Kominsky, J.R.; Rossman, M.D.

    1987-01-01

    Five workers at a precious metal refinery developed granulomatous lung disease between 1972 and 1985. The original diagnosis was sarcoidosis, but 4 of the workers were subsequently proved to have hypersensitivity to beryllium by in vitro proliferative responses of lymphocytes obtained by bronchoalveolar lavage. Review of medical records of coworkers and extensive industrial hygiene surveillance of the plant demonstrated that 4 cases occurred in the furnace area where air concentrations of beryllium fume were consistently below the permissible exposure limit of 2 micrograms/M3. A single case has been recognized from parts of the refinery where exposures to cold beryllium dustmore » often exceeded the standard by as much as 20-fold. These data demonstrate that chronic beryllium disease still occurs and confirm the importance of specific immunologic testing in patients suspected of having sarcoidosis but with potential exposure to beryllium. The data raise concern about the adequacy of modern industrial controls, especially in the setting of exposure to highly respirable beryllium fumes.« less

  10. Removal of sulfur compounds from petroleum refinery wastewater through adsorption on modified activated carbon.

    PubMed

    Ben Hariz, Ichrak; Al Ayni, Foued; Monser, Lotfi

    2014-01-01

    The adsorption of sulfur compounds from petroleum refinery wastewater on a chemically modified activated carbon (MAC) was investigated. The modification technique (nitric acid, hydrogen peroxide and thermal modification) enhanced the removal capacity of carbon and therefore decreases cost-effective removal of sulfide from refinery wastewater. Adsorption equilibrium and kinetics data were determined for sulfur removal from real refinery wastewater. The data were evaluated according to several adsorption isotherm and kinetics models. The Freundlich isotherm fitted well with the equilibrium data of sulfur on different adsorbents, whereas the kinetics data were best fitted by the pseudo-second-order model. Insights of sulfide removal mechanisms indicated that the sorption was controlled through the intraparticle diffusion mechanism with a significant contribution of film diffusion. The MAC adsorbent was found to have an effective removal capacity of approximately 2.5 times that of non-modified carbon. Using different MAC, sulfides were eliminated with a removal capacity of 52 mg g(-1). Therefore, MAC can be utilized as an effective and less expensive adsorbent for the reduction of sulfur in refinery wastewater.

  11. Nuclear reactor heat transport system component low friction support system

    DOEpatents

    Wade, Elman E.

    1980-01-01

    A support column for a heavy component of a liquid metal fast breeder reactor heat transport system which will deflect when the pipes leading coolant to and from the heavy component expand or contract due to temperature changes includes a vertically disposed pipe, the pipe being connected to the heavy component by two longitudinally spaced cycloidal dovetail joints wherein the distal end of each of the dovetails constitutes a part of the surface of a large diameter cylinder and the centerlines of these large diameter cylinders intersect at right angles and the pipe being supported through two longitudinally spaced cycloidal dovetail joints wherein the distal end of each of the dovetails constitutes a part of the surface of a large diameter cylinder and the centerlines of these large diameter cylinders intersect at right angles, each of the cylindrical surfaces bearing on a flat and horizontal surface.

  12. Cutting Diameter Influences Early Survival and Growth of Several Populus Clones

    Treesearch

    Donald Dickmann; Howard Phipps; Daniel Netzer

    1980-01-01

    The effects of cutting diameter on early survival and growth of several Populus clones were studied in field tests in Wisconsin and Michigan. Generally, large diameter cuttings survived and grew better than small diameter cuttings. Response differences among clones were evident.

  13. Well-to-wheels analysis of fast pyrolysis pathways with the GREET model.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Han, J.; Elgowainy, A.; Palou-Rivera, I.

    The pyrolysis of biomass can help produce liquid transportation fuels with properties similar to those of petroleum gasoline and diesel fuel. Argonne National Laboratory conducted a life-cycle (i.e., well-to-wheels [WTW]) analysis of various pyrolysis pathways by expanding and employing the Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. The WTW energy use and greenhouse gas (GHG) emissions from the pyrolysis pathways were compared with those from the baseline petroleum gasoline and diesel pathways. Various pyrolysis pathway scenarios with a wide variety of possible hydrogen sources, liquid fuel yields, and co-product application and treatment methods were considered. Atmore » one extreme, when hydrogen is produced from natural gas and when bio-char is used for process energy needs, the pyrolysis-based liquid fuel yield is high (32% of the dry mass of biomass input). The reductions in WTW fossil energy use and GHG emissions relative to those that occur when baseline petroleum fuels are used, however, is modest, at 50% and 51%, respectively, on a per unit of fuel energy basis. At the other extreme, when hydrogen is produced internally via reforming of pyrolysis oil and when bio-char is sequestered in soil applications, the pyrolysis-based liquid fuel yield is low (15% of the dry mass of biomass input), but the reductions in WTW fossil energy use and GHG emissions are large, at 79% and 96%, respectively, relative to those that occur when baseline petroleum fuels are used. The petroleum energy use in all scenarios was restricted to biomass collection and transportation activities, which resulted in a reduction in WTW petroleum energy use of 92-95% relative to that found when baseline petroleum fuels are used. Internal hydrogen production (i.e., via reforming of pyrolysis oil) significantly reduces fossil fuel use and GHG emissions because the hydrogen from fuel gas or pyrolysis oil (renewable sources) displaces that from fossil fuel natural gas and the amount of fossil natural gas used for hydrogen production is reduced; however, internal hydrogen production also reduces the potential petroleum energy savings (per unit of biomass input basis) because the fuel yield declines dramatically. Typically, a process that has a greater liquid fuel yield results in larger petroleum savings per unit of biomass input but a smaller reduction in life-cycle GHG emissions. Sequestration of the large amount of bio-char co-product (e.g., in soil applications) provides a significant carbon dioxide credit, while electricity generation from bio-char combustion provides a large energy credit. The WTW energy and GHG emissions benefits observed when a pyrolysis oil refinery was integrated with a pyrolysis reactor were small when compared with those that occur when pyrolysis oil is distributed to a distant refinery, since the activities associated with transporting the oil between the pyrolysis reactors and refineries have a smaller energy and emissions footprint than do other activities in the pyrolysis pathway.« less

  14. Determination of the priority indexes for the oil refinery wastewater treatment process

    NASA Astrophysics Data System (ADS)

    Chesnokova, M. G.; Myshlyavtsev, A. V.; Kriga, A. S.; Shaporenko, A. P.; Markelov, V. V.

    2017-08-01

    The wastewater biological treatment intensity and effectiveness are influenced by many factors: temperature, pH, presence and concentration of toxic substances, the biomass concentration et al. Regulation of them allows controlling the biological treatment process. Using the Bayesian theorem the link between changes was determined and the wastewater indexes normative limits exceeding influence for activated sludge characteristics alteration probability was evaluated. The estimation of total, or aposterioric, priority index presence probability, which characterizes the wastewater treatment level, is an important way to use the Bayesian theorem in activated sludge swelling prediction at the oil refinery biological treatment unit.

  15. Survey points to practices that reduce refinery maintenance spending

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ricketts, R.

    During the past decade, Solomon Associates Inc., Dallas, has conducted several comparative analyses of maintenance costs in the refining industry. These investigations have brought to light maintenance practices and reliability improvement activities that are responsible for the wide range of maintenance costs recorded by refineries. Some of the practices are of an organizational nature and thus are of interest to managers reviewing their operations. The paper discusses maintenance costs; profitability; cost trends; equipment availability; funds application; two basic organizational approached to maintenance (repair-focused organization and reliability-focused organization); low-cost practices; and organizational style.

  16. Computer model for refinery operations with emphasis on jet fuel production. Volume 2: Data and technical bases

    NASA Technical Reports Server (NTRS)

    Dunbar, D. N.; Tunnah, B. G.

    1978-01-01

    The FORTRAN computing program predicts the flow streams and material, energy, and economic balances of a typical petroleum refinery, with particular emphasis on production of aviation turbine fuel of varying end point and hydrogen content specifications. The program has provision for shale oil and coal oil in addition to petroleum crudes. A case study feature permits dependent cases to be run for parametric or optimization studies by input of only the variables which are changed from the base case. The report has sufficient detail for the information of most readers.

  17. Feasibility study on the modernization and expansion of the Tema Oil Refinery: Final report. Export trade information

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1992-04-01

    The study was undertaken in order to serve the Ministry of Energy of Ghana under the terms of the contract with respect to deliverables, cost and schedule. The objectives of the study were: to evaluate the ability of the proposed refinery configuration to meet the demands for petroleum products through the year 2005; to demonstrate sound economics in order to attract financing from leading international agencies such as the World Bank, African Development Bank and Export-Import Bank; and to serve as a basis for meaningful future work by the Ministry.

  18. Jamaica plans petchem JV with Israel

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-11-22

    Israel`s Dankner group is negotiating with the Jamaican government for conversion of the Pertojam refinery into a petrochemical complex. The plan represents a revival of a year-old proposal by the Jamaican opposition leader Edward Seaga. It calls for a $120-million upgrade of the refinery, including a catalytic cracker and a $150-million chlor-alkali facility to produce 550,000 m.t./year of chlorine that would in turn be used to produce 300,000 m.t./year of polvinyl chloride. Jamaica is a major importer of caustic soda, consuming about 330,000 m.t./year in its bauxite industry.

  19. Biostimulation of Indigenous Microbial Community for Bioremediation of Petroleum Refinery Sludge

    PubMed Central

    Sarkar, Jayeeta; Kazy, Sufia K.; Gupta, Abhishek; Dutta, Avishek; Mohapatra, Balaram; Roy, Ajoy; Bera, Paramita; Mitra, Adinpunya; Sar, Pinaki

    2016-01-01

    Nutrient deficiency severely impairs the catabolic activity of indigenous microorganisms in hydrocarbon rich environments (HREs) and limits the rate of intrinsic bioremediation. The present study aimed to characterize the microbial community in refinery waste and evaluate the scope for biostimulation based in situ bioremediation. Samples recovered from the wastewater lagoon of Guwahati refinery revealed a hydrocarbon enriched [high total petroleum hydrocarbon (TPH)], oxygen-, moisture-limited, reducing environment. Intrinsic biodegradation ability of the indigenous microorganisms was enhanced significantly (>80% reduction in TPH by 90 days) with nitrate amendment. Preferred utilization of both higher- (>C30) and middle- chain (C20-30) length hydrocarbons were evident from GC-MS analysis. Denaturing gradient gel electrophoresis and community level physiological profiling analyses indicated distinct shift in community’s composition and metabolic abilities following nitrogen (N) amendment. High throughput deep sequencing of 16S rRNA gene showed that the native community was mainly composed of hydrocarbon degrading, syntrophic, methanogenic, nitrate/iron/sulfur reducing facultative anaerobic bacteria and archaebacteria, affiliated to γ- and δ-Proteobacteria and Euryarchaeota respectively. Genes for aerobic and anaerobic alkane metabolism (alkB and bssA), methanogenesis (mcrA), denitrification (nirS and narG) and N2 fixation (nifH) were detected. Concomitant to hydrocarbon degradation, lowering of dissolve O2 and increase in oxidation-reduction potential (ORP) marked with an enrichment of N2 fixing, nitrate reducing aerobic/facultative anaerobic members [e.g., Azovibrio, Pseudoxanthomonas and Comamonadaceae members] was evident in N amended microcosm. This study highlighted that indigenous community of refinery sludge was intrinsically diverse, yet appreciable rate of in situ bioremediation could be achieved by supplying adequate N sources. PMID:27708623

  20. Strategies for sustainable woodland on contaminated soils.

    PubMed

    Dickinson, N M

    2000-07-01

    Extensive in situ reclamation treatment technologies are appropriate for a large proportion of contaminated land in place of total removal or complete containment of soil. In this paper, initial results are presented of site descriptions, tree survival and metal uptake patterns from two field planting trials on a highly industrially contaminated site adjacent to a metal refinery and on old sanitary landfill sites. Survival rate was high in both trials but factors besides heavy metals were particularly significant. Uptake patterns of metals into foliage and woody tissues were variable, with substantial uptake in some species and clones supporting the findings of earlier pot experiments. It is argued that there is sufficient evidence to consider the use of trees in reclamation as part of a realistic, integrated, low-cost, ecologically-sound and sustainable reclamation strategy for contaminated land. This is an opportunity to bring a large number of brownfield sites into productive use, which otherwise would be prohibitively expensive to restore.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top