NASA Astrophysics Data System (ADS)
Bieda, Bogusław; Grzesik, Katarzyna
2017-11-01
The study proposes an stochastic approach based on Monte Carlo (MC) simulation for life cycle assessment (LCA) method limited to life cycle inventory (LCI) study for rare earth elements (REEs) recovery from the secondary materials processes production applied to the New Krankberg Mine in Sweden. The MC method is recognizes as an important tool in science and can be considered the most effective quantification approach for uncertainties. The use of stochastic approach helps to characterize the uncertainties better than deterministic method. Uncertainty of data can be expressed through a definition of probability distribution of that data (e.g. through standard deviation or variance). The data used in this study are obtained from: (i) site-specific measured or calculated data, (ii) values based on literature, (iii) the ecoinvent process "rare earth concentrate, 70% REO, from bastnäsite, at beneficiation". Environmental emissions (e.g, particulates, uranium-238, thorium-232), energy and REE (La, Ce, Nd, Pr, Sm, Dy, Eu, Tb, Y, Sc, Yb, Lu, Tm, Y, Gd) have been inventoried. The study is based on a reference case for the year 2016. The combination of MC analysis with sensitivity analysis is the best solution for quantified the uncertainty in the LCI/LCA. The reliability of LCA results may be uncertain, to a certain degree, but this uncertainty can be noticed with the help of MC method.
NASA Astrophysics Data System (ADS)
Dong, Bing; Ren, De-Qing; Zhang, Xi
2011-08-01
An adaptive optics (AO) system based on a stochastic parallel gradient descent (SPGD) algorithm is proposed to reduce the speckle noises in the optical system of a stellar coronagraph in order to further improve the contrast. The principle of the SPGD algorithm is described briefly and a metric suitable for point source imaging optimization is given. The feasibility and good performance of the SPGD algorithm is demonstrated by an experimental system featured with a 140-actuator deformable mirror and a Hartmann-Shark wavefront sensor. Then the SPGD based AO is applied to a liquid crystal array (LCA) based coronagraph to improve the contrast. The LCA can modulate the incoming light to generate a pupil apodization mask of any pattern. A circular stepped pattern is used in our preliminary experiment and the image contrast shows improvement from 10-3 to 10-4.5 at an angular distance of 2λ/D after being corrected by SPGD based AO.
The 2d-LCA as an alternative to x-wires
NASA Astrophysics Data System (ADS)
Puczylowski, Jaroslaw; Hölling, Michael; Peinke, Joachim
2015-11-01
The 2d-Laser Cantilever Anemometer (2d-LCA) is an innovative sensor for two-dimensional velocity measurements in fluids. It uses a micostructured cantilever made of silicon and SU-8 as a sensing element and is capable of performing mesurements with extremly high temporal resolutions up to 150kHz. The size of the cantilever defines its spatial resolution, which is in the order of 150 μm only. Another big feature is a large angular range of 180° in total. The 2d-LCA has been developed as an alternative measurement method to x-wires with the motivation to create a sensor that can operate in areas where the use of hot-wire anemometry is difficult. These areas include measurements in liquids and in near-wall or particle-laden flows. Unlike hot-wires, the resolution power of the 2d-LCA does not decrease with increasing flow velocity, making it particularly suitable for measurements in high speed flows. Comparative measurements with the 2d-LCA and hot-wires have been carried out in order to assess the performance of the new anemometer. The data of both measurement techniques were analyzed using the same stochastic methods including a spectral analysis as well as an inspection of increment statistics and structure functions. Furthermore, key parameters, such as mean values of both velocity components, angles of attack and the characteristic length scales were determined from both data sets. The analysis reveals a great agreement between both anemometers and thus confirms the new approach.
2d-LCA - an alternative to x-wires
NASA Astrophysics Data System (ADS)
Puczylowski, Jaroslaw; Hölling, Michael; Peinke, Joachim
2014-11-01
The 2d-Laser Cantilever Anemometer (2d-LCA) is an innovative sensor for two-dimensional velocity measurements in fluids. It uses a micostructured cantilever made of silicon and SU-8 as a sensing element and is capable of performing mesurements with extremly high temporal resolutions up to 150 kHz. The size of the cantilever defines its spatial resolution, which is in the order of 150 μm only. Another big feature is a large angular range of 180° in total. The 2d-LCA has been developed as an alternative measurement method to x-wires with the motivation to create a sensor that can operate in areas where the use of hot-wire anemometry is difficult. These areas include measurements in liquids and in near-wall or particle-laden flows. Unlike hot-wires, the resolution power of the 2d-LCA does not decrease with increasing flow velocity, making it particularly suitable for measurements in high speed flows. Comparative measurements with the 2d-LCA and hot-wires have been carried out in order to assess the performance of the new anemometer. The data of both measurement techniques were analyzed using the same stochastic methods including a spectral analysis as well as an inspection of increment statistics and structure functions. Furthermore, key parameters, such as mean values of both velocity components, angles of attack and the characteristic length scales were determined from both data sets. The analysis reveals a great agreement between both anemometers and thus confirms the new approach.
Bieda, Bogusław
2014-05-15
The purpose of the paper is to present the results of application of stochastic approach based on Monte Carlo (MC) simulation for life cycle inventory (LCI) data of Mittal Steel Poland (MSP) complex in Kraków, Poland. In order to assess the uncertainty, the software CrystalBall® (CB), which is associated with Microsoft® Excel spreadsheet model, is used. The framework of the study was originally carried out for 2005. The total production of steel, coke, pig iron, sinter, slabs from continuous steel casting (CSC), sheets from hot rolling mill (HRM) and blast furnace gas, collected in 2005 from MSP was analyzed and used for MC simulation of the LCI model. In order to describe random nature of all main products used in this study, normal distribution has been applied. The results of the simulation (10,000 trials) performed with the use of CB consist of frequency charts and statistical reports. The results of this study can be used as the first step in performing a full LCA analysis in the steel industry. Further, it is concluded that the stochastic approach is a powerful method for quantifying parameter uncertainty in LCA/LCI studies and it can be applied to any steel industry. The results obtained from this study can help practitioners and decision-makers in the steel production management. Copyright © 2013 Elsevier B.V. All rights reserved.
Developing Anticipatory Life Cycle Assessment Tools to Support Responsible Innovation
NASA Astrophysics Data System (ADS)
Wender, Benjamin
Several prominent research strategy organizations recommend applying life cycle assessment (LCA) early in the development of emerging technologies. For example, the US Environmental Protection Agency, the National Research Council, the Department of Energy, and the National Nanotechnology Initiative identify the potential for LCA to inform research and development (R&D) of photovoltaics and products containing engineered nanomaterials (ENMs). In this capacity, application of LCA to emerging technologies may contribute to the growing movement for responsible research and innovation (RRI). However, existing LCA practices are largely retrospective and ill-suited to support the objectives of RRI. For example, barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. This dissertation focuses on development of anticipatory LCA tools that incorporate elements of technology forecasting, provide robust explorations of uncertainty, and engage diverse innovation actors in overcoming retrospective approaches to environmental assessment and improvement of emerging technologies. Chapter one contextualizes current LCA practices within the growing literature articulating RRI and identifies the optimal place in the stage gate innovation model to apply LCA. Chapter one concludes with a call to develop anticipatory LCA---building on the theory of anticipatory governance---as a series of methodological improvements that seek to align LCA practices with the objectives of RRI. Chapter two provides a framework for anticipatory LCA, identifies where research from multiple disciplines informs LCA practice, and builds off the recommendations presented in the preceding chapter. Chapter two focuses on crystalline and thin film photovoltaics (PV) to illustrate the novel framework, in part because PV is an environmentally motivated technology undergoing extensive R&D efforts and rapid increases in scale of deployment. The chapter concludes with a series of research recommendations that seek to direct PV research agenda towards pathways with the greatest potential for environmental improvement. Similar to PV, engineered nanomaterials (ENMs) are an emerging technology with numerous potential applications, are the subject of active R&D efforts, and are characterized by high uncertainty regarding potential environmental implications. Chapter three introduces a Monte Carlo impact assessment tool based on the toxicity impact assessment model USEtox and demonstrates stochastic characterization factor (CF) development to prioritize risk research with the greatest potential to improve certainty in CFs. The case study explores a hypothetical decision in which personal care product developers are interested in replacing the conventional antioxidant niacinamide with the novel ENM C 60, but face high data uncertainty, are unsure regarding potential ecotoxicity impacts associated with this substitution, and do not know what future risk-relevant experiments to invest in that most efficiently improve certainty in the comparison. Results suggest experiments that elucidate C60 partitioning to suspended solids should be prioritized over parameters with little influence on results. This dissertation demonstrates a novel anticipatory approach to exploration of uncertainty in environmental models that can create new, actionable knowledge with potential to guide future research and development decisions.
Jamali, Jamshid; Ayatollahi, Seyyed Mohammad Taghi
2015-01-01
Background: Nurses constitute the most providers of health care systems. Their mental health can affect the quality of services and patients’ satisfaction. General Health Questionnaire (GHQ-12) is a general screening tool used to detect mental disorders. Scoring method and determining thresholds for this questionnaire are debatable and the cut-off points can vary from sample to sample. This study was conducted to estimate the prevalence of mental disorders among Iranian nurses using GHQ-12 and also compare Latent Class Analysis (LCA) and K-means clustering with traditional scoring method. Methodology: A cross-sectional study was carried out in Fars and Bushehr provinces of southern Iran in 2014. Participants were 771 Iranian nurses, who filled out the GHQ-12 questionnaire. Traditional scoring method, LCA and K-means were used to estimate the prevalence of mental disorder among Iranian nurses. Cohen’s kappa statistic was applied to assess the agreement between the LCA and K-means with traditional scoring method of GHQ-12. Results: The nurses with mental disorder by scoring method, LCA and K-mean were 36.3% (n=280), 32.2% (n=248), and 26.5% (n=204), respectively. LCA and logistic regression revealed that the prevalence of mental disorder in females was significantly higher than males. Conclusion: Mental disorder in nurses was in a medium level compared to other people living in Iran. There was a little difference between prevalence of mental disorder estimated by scoring method, K-means and LCA. According to the advantages of LCA than K-means and different results in scoring method, we suggest LCA for classification of Iranian nurses according to their mental health outcomes using GHQ-12 questionnaire PMID:26622202
Jamali, Jamshid; Ayatollahi, Seyyed Mohammad Taghi
2015-10-01
Nurses constitute the most providers of health care systems. Their mental health can affect the quality of services and patients' satisfaction. General Health Questionnaire (GHQ-12) is a general screening tool used to detect mental disorders. Scoring method and determining thresholds for this questionnaire are debatable and the cut-off points can vary from sample to sample. This study was conducted to estimate the prevalence of mental disorders among Iranian nurses using GHQ-12 and also compare Latent Class Analysis (LCA) and K-means clustering with traditional scoring method. A cross-sectional study was carried out in Fars and Bushehr provinces of southern Iran in 2014. Participants were 771 Iranian nurses, who filled out the GHQ-12 questionnaire. Traditional scoring method, LCA and K-means were used to estimate the prevalence of mental disorder among Iranian nurses. Cohen's kappa statistic was applied to assess the agreement between the LCA and K-means with traditional scoring method of GHQ-12. The nurses with mental disorder by scoring method, LCA and K-mean were 36.3% (n=280), 32.2% (n=248), and 26.5% (n=204), respectively. LCA and logistic regression revealed that the prevalence of mental disorder in females was significantly higher than males. Mental disorder in nurses was in a medium level compared to other people living in Iran. There was a little difference between prevalence of mental disorder estimated by scoring method, K-means and LCA. According to the advantages of LCA than K-means and different results in scoring method, we suggest LCA for classification of Iranian nurses according to their mental health outcomes using GHQ-12 questionnaire.
NASA Astrophysics Data System (ADS)
Fernandez Bou, A. S.; Carrasquillo Quintana, O.; Dierick, D.; Harmon, T. C.; Johnson, S.; Schwendenmann, L.; Zelikova, T. J.
2016-12-01
The goal of this work is to advance our understanding of soil carbon cycling in highly productive neotropical wet forests. More specifically, we are investigating the influence of leaf cutter ants (LCA) on soil CO2 gas dynamics in primary and secondary forest soils at La Selva Biological Station, Costa Rica. LCA are the dominant herbivore in tropical Americas, responsible for as much as 50% of the total herbivory. Their presence is increasing and their range is expanding because of forest fragmentation and other human impacts. We installed gas sampling wells in LCA (Atta cephalotes) nest and control sites (non-nests in the same soil and forest settings). The experimental design encompassed land cover (primary and secondary forest) and soil type (residual and alluvial). We collected gas samples monthly over an 18-month period. Several of the LCA nests were abandoned during this period. Nevertheless, we continued to sample these sites for LCA legacy effects. In several of the sites, we also installed sensors to continuously monitor soil moisture content, temperature, and CO2 levels. Within the 18-month period we conducted a 2-month field campaign to collect soil and nest vent CO2 efflux data from 3 of the nest-control pairs. Integrating the various data sets, we observed that for most of the sites nest and control soils behaved similarly during the tropical dry season. However, during the wet season gas well CO2 concentrations increased in the control sites while levels in the nests remained at dry season levels. This outcome suggests that ants modify soil gas transport properties (e.g., tortuosity). In situ time series and efflux sampling campaign data corroborated these findings. Abandoned nest CO2 levels were similar to those of the active nests, supporting the notion of a legacy effect from LCA manipulations. For this work, the period of abandonment was relatively short (several months to 1 year maximum), which appears to be insufficient for estimating the duration effect. Overall, these results demonstrate that LCA exert a significant effect on carbon cycling in rain forest soils.
Latent Class Subtyping of Attention-Deficit/Hyperactivity Disorder and Comorbid Conditions
ERIC Educational Resources Information Center
Acosta, Maria T.; Castellanos, F. Xavier; Bolton, Kelly L.; Balog, Joan Z.; Eagen, Patricia; Nee, Linda; Jones, Janet; Palacio, Luis; Sarampote, Christopher; Russell, Heather F.; Berg, Kate; Arcos-Burgos, Mauricio; Muenke, Maximilian
2008-01-01
The study attempts to carry out latent class analysis (LCA) in a sample of 1010 individuals, some with Attention-Deficit/Hyperactivity disorder (ADHD) and others normal. Results indicate that LCA can feasibly allow the combination of externalizing and internalizing symptoms for future tests regarding specific genetic risk factors.
Optimal sparse approximation with integrate and fire neurons.
Shapero, Samuel; Zhu, Mengchen; Hasler, Jennifer; Rozell, Christopher
2014-08-01
Sparse approximation is a hypothesized coding strategy where a population of sensory neurons (e.g. V1) encodes a stimulus using as few active neurons as possible. We present the Spiking LCA (locally competitive algorithm), a rate encoded Spiking Neural Network (SNN) of integrate and fire neurons that calculate sparse approximations. The Spiking LCA is designed to be equivalent to the nonspiking LCA, an analog dynamical system that converges on a ℓ(1)-norm sparse approximations exponentially. We show that the firing rate of the Spiking LCA converges on the same solution as the analog LCA, with an error inversely proportional to the sampling time. We simulate in NEURON a network of 128 neuron pairs that encode 8 × 8 pixel image patches, demonstrating that the network converges to nearly optimal encodings within 20 ms of biological time. We also show that when using more biophysically realistic parameters in the neurons, the gain function encourages additional ℓ(0)-norm sparsity in the encoding, relative both to ideal neurons and digital solvers.
Huang, Junhui; Xue, Qi; Wang, Zhao; Gao, Jianmin
2016-09-03
While color-coding methods have improved the measuring efficiency of a structured light three-dimensional (3D) measurement system, they decreased the measuring accuracy significantly due to lateral chromatic aberration (LCA). In this study, the LCA in a structured light measurement system is analyzed, and a method is proposed to compensate the error caused by the LCA. Firstly, based on the projective transformation, a 3D error map of LCA is constructed in the projector images by using a flat board and comparing the image coordinates of red, green and blue circles with the coordinates of white circles at preselected sample points within the measurement volume. The 3D map consists of the errors, which are the equivalent errors caused by LCA of the camera and projector. Then in measurements, error values of LCA are calculated and compensated to correct the projector image coordinates through the 3D error map and a tri-linear interpolation method. Eventually, 3D coordinates with higher accuracy are re-calculated according to the compensated image coordinates. The effectiveness of the proposed method is verified in the following experiments.
Huang, Junhui; Xue, Qi; Wang, Zhao; Gao, Jianmin
2016-01-01
While color-coding methods have improved the measuring efficiency of a structured light three-dimensional (3D) measurement system, they decreased the measuring accuracy significantly due to lateral chromatic aberration (LCA). In this study, the LCA in a structured light measurement system is analyzed, and a method is proposed to compensate the error caused by the LCA. Firstly, based on the projective transformation, a 3D error map of LCA is constructed in the projector images by using a flat board and comparing the image coordinates of red, green and blue circles with the coordinates of white circles at preselected sample points within the measurement volume. The 3D map consists of the errors, which are the equivalent errors caused by LCA of the camera and projector. Then in measurements, error values of LCA are calculated and compensated to correct the projector image coordinates through the 3D error map and a tri-linear interpolation method. Eventually, 3D coordinates with higher accuracy are re-calculated according to the compensated image coordinates. The effectiveness of the proposed method is verified in the following experiments. PMID:27598174
Jokinen, Jukka; Snellman, Marja; Palmu, Arto A; Saukkoriipi, Annika; Verlant, Vincent; Pascal, Thierry; Devaster, Jeanne-Marie; Hausdorff, William P; Kilpi, Terhi M
2018-06-01
Clinical assessments of vaccines to prevent pneumococcal community-acquired pneumonia (CAP) require sensitive and specific case definitions, but there is no gold standard diagnostic test. To develop a new case definition suitable for vaccine efficacy studies, we applied latent class analysis (LCA) to the results from 7 diagnostic tests for pneumococcal etiology on clinical specimens from 323 elderly persons with radiologically confirmed pneumonia enrolled in the Finnish Community-Acquired Pneumonia Epidemiology study during 2005-2007. Compared with the conventional use of LCA, which is mainly to determine sensitivities and specificities of different tests, we instead used LCA as an appropriate instrument to predict the probability of pneumococcal etiology for each CAP case based on individual test profiles, and we used the predictions to minimize the sample size that would be needed for a vaccine efficacy trial. When compared with the conventional laboratory criteria of encapsulated pneumococci in culture, in blood culture or high-quality sputum culture, or urine antigen positivity, our optimized case definition for pneumococcal CAP resulted in a trial sample size that was almost 20,000 subjects smaller. We believe that the novel application of LCA detailed here to determine a case definition for pneumococcal CAP could also be similarly applied to other diseases without a gold standard.
Hydrocarbon Degradation Pathways used by Coastal Sediment Microbial Communities exposed to Crude Oil
NASA Astrophysics Data System (ADS)
Spaulding-Astudillo, F.; Sharrar, A.; Orcutt, B.
2016-02-01
The site-specific microbial community response to crude oil exposure in marine environments is not well described. Moreover, the abundance of genes implicated in long-chain alkane (LCA) and polycyclic aromatic hydrocarbon (PAH) degradation are not well understood. Coastal sediments from the Beaufort Sea, Gulf of Alaska, and Portland Harbor were treated with crude oil and incubated aerobically. Deep-sea sediments from the Gulf of Mexico were treated with the same crude oil and anaerobically incubated in situ for five months before recovery. Cycloclasticus, a known hydrocarbon-degrader, was abundant in all oiled, aerobic samples regardless of temperature, demonstrating a generalist oil-response strategy. Other hydrocarbon degrading bacteria showed differential response to either site or temperature. Primers for alkB, assA, bssA, and ncr, catabolic gene markers for aerobic LCA degradation, anaerobic LCA degradation, anaerobic LCA & PAH degradation, and anaerobic PAH degradation, respectively, were found in literature and tested on DNA extracts in a QPCR-based assay. Gene abundance was site and condition variable.
Development of lightweight ceramic ablators and arc-jet test results
NASA Technical Reports Server (NTRS)
Tran, Huy K.
1994-01-01
Lightweight ceramic ablators (LCA's) were recently developed at Ames to investigate the use of low density fibrous substrates and organic resins as high temperature, high strength ablative heat shields. Unlike the traditional ablators, LCA's use porous ceramic/carbon fiber matrices as substrates for structural support, and polymeric resins as fillers. Several substrates and resins were selected for the initial studies, and the best performing candidates were further characterized. Three arcjet tests were conducted to determine the LCA's thermal performance and ablation characteristics in a high enthalpy, hypersonic flow environment. Mass loss and recession measurements were obtained for each sample at post test, and the recession rates were determined from high speed motion films. Surface temperatures were also obtained from optical pyrometers.
Stone, Edwin M.; Cideciyan, Artur V.; Aleman, Tomas S.; Scheetz, Todd E.; Sumaroka, Alexander; Ehlinger, Mary A.; Schwartz, Sharon B.; Fishman, Gerald A.; Traboulsi, Elias I.; Lam, Byron L.; Fulton, Anne B.; Mullins, Robert F.; Sheffield, Val C.; Jacobson, Samuel G.
2014-01-01
Objective To investigate whether mutations in NPHP5 can cause Leber congenital amaurosis (LCA) without early-onset renal disease. Methods DNA samples from 276 individuals with non-syndromic LCA were screened for variations in the NPHP5 gene. Each had been previously screened for mutations in 8 known LCA genes without identifying a disease-causing genotype. Results Nine of the 276 LCA probands (3.2%) harbored 2 plausible disease-causing mutations (7 different alleles) in NPHP5. Four of these have been previously reported in patients with Senior-Loken syndrome (F141del, R461X, H506del, and R489X) and 3 are novel (A111del, E346X, and R455X). All 9 patients had severe visual loss from early childhood but none had overt renal disease in the first decade of life. Two patients were diagnosed with nephronophthisis in the second decade. Retinal imaging studies showed retained photoreceptor nuclei and retinal pigment epithelium integrity mainly in the cone-rich central retina, a phenotype with strong similarities to that of NPHP6 disease. Conclusions Mutations in NPHP5 can cause LCA without early-onset renal disease. Abnormalities observed in the photoreceptor outer segments (a cilial structure) may explain the severe visual loss in NPHP5-associated LCA. Clinical Relevance The persistence of central photoreceptor nuclei despite severe visual loss in NPHP5 disease is encouraging for future therapeutic interventions. PMID:21220633
Morin, Ruth T; Axelrod, Bradley N
Latent Class Analysis (LCA) was used to classify a heterogeneous sample of neuropsychology data. In particular, we used measures of performance validity, symptom validity, cognition, and emotional functioning to assess and describe latent groups of functioning in these areas. A data-set of 680 neuropsychological evaluation protocols was analyzed using a LCA. Data were collected from evaluations performed for clinical purposes at an urban medical center. A four-class model emerged as the best fitting model of latent classes. The resulting classes were distinct based on measures of performance validity and symptom validity. Class A performed poorly on both performance and symptom validity measures. Class B had intact performance validity and heightened symptom reporting. The remaining two Classes performed adequately on both performance and symptom validity measures, differing only in cognitive and emotional functioning. In general, performance invalidity was associated with worse cognitive performance, while symptom invalidity was associated with elevated emotional distress. LCA appears useful in identifying groups within a heterogeneous sample with distinct performance patterns. Further, the orthogonal nature of performance and symptom validities is supported.
Catalytic Properties of Botulinum Neurotoxins Subtypes A3 and A4
Henkel, James S.; Jacobson, Mark; Tepp, William; Pier, Christina; Johnson, Eric A.; Barbieri, Joseph T.
2009-01-01
Botulinum toxins (BoNT) are zinc proteases (serotypes A-G) which cause flaccid paralysis through the cleavage of SNARE proteins within motor neurons. BoNT/A was originally organized into two subtypes: BoNT/A1 and BoNT/A2, which are ~ 95 % homologous and possess similar catalytic activities. Subsequently, two additional subtypes were identified; BoNT/A3 (Loch Maree), and BoNT/A4 (657Ba), which have 81 and 88% homology with BoNT/A1, respectively. Alignment studies predicted that BoNT/A3 and BoNT/A4 were sufficiently different to BoNT/A1 to affect SNAP25 binding and cleavage. Recombinant Light Chain (LC) of BoNT/A3 (LC/A3) and BoNT/A4 (LC/A4) were subjected to biochemical analysis. LC/A3 cleaved SNAP25 at 50% the rate of LC/A1, but cleaved SNAPtide® at a faster rate than LC/A1, while LC/A4 cleaved SNAP25 and SNAPtide® at slower rates than LC/A1. LC/A3 and LC/A4 had similar Kms for SNAP25 relative to LC/A1, while the kcat for LC/A4 was 10- fold slower than LC/A1, suggesting a defect in substrate cleavage. Neither LC/A3 nor LC/A4 possessed autocatalytic activity, a property of LC/A1 and LC/A2. Thus, the four subtypes of BoNT/A bind SNAP25 with similar affinity but have different catalytic capacities for SNAP25 cleavage, SNAPtide® cleavage, and autocatalysis. The catalytic properties identified among the subtypes of LC/A may influence strategies for the development of small molecule- or peptide- inhibitors as therapies against botulism. PMID:19256469
Guidance on Data Quality Assessment for Life Cycle Inventory ...
Data quality within Life Cycle Assessment (LCA) is a significant issue for the future support and development of LCA as a decision support tool and its wider adoption within industry. In response to current data quality standards such as the ISO 14000 series, various entities within the LCA community have developed different methodologies to address and communicate the data quality of Life Cycle Inventory (LCI) data. Despite advances in this field, the LCA community is still plagued by the lack of reproducible data quality results and documentation. To address these issues, US EPA has created this guidance in order to further support reproducible life cycle inventory data quality results and to inform users of the proper application of the US EPA supported data quality system. The work for this report was begun in December 2014 and completed as of April 2016.The updated data quality system includes a novel approach to the pedigree matrix by addressing data quality at the flow and the process level. Flow level indicators address source reliability, temporal correlation, geographic correlation, technological correlation and data sampling methods. The process level indicators address the level of review the unit process has undergone and its completeness. This guidance is designed to be updatable as part of the LCA Research Center’s continuing commitment to data quality advancements. Life cycle assessment is increasingly being used as a tool to identify areas of
Garnett, Bernice Raveche; Masyn, Katherine E; Austin, S Bryn; Miller, Matthew; Williams, David R; Viswanath, Kasisomayajula
2014-08-01
Discrimination is commonly experienced among adolescents. However, little is known about the intersection of multiple attributes of discrimination and bullying. We used a latent class analysis (LCA) to illustrate the intersections of discrimination attributes and bullying, and to assess the associations of LCA membership to depressive symptoms, deliberate self harm and suicidal ideation among a sample of ethnically diverse adolescents. The data come from the 2006 Boston Youth Survey where students were asked whether they had experienced discrimination based on four attributes: race/ethnicity, immigration status, perceived sexual orientation and weight. They were also asked whether they had been bullied or assaulted for these attributes. A total of 965 (78%) students contributed to the LCA analytic sample (45% Non-Hispanic Black, 29% Hispanic, 58% Female). The LCA revealed that a 4-class solution had adequate relative and absolute fit. The 4-classes were characterized as: low discrimination (51%); racial discrimination (33%); sexual orientation discrimination (7%); racial and weight discrimination with high bullying (intersectional class) (7%). In multivariate models, compared to the low discrimination class, individuals in the sexual orientation discrimination class and the intersectional class had higher odds of engaging in deliberate self-harm. Students in the intersectional class also had higher odds of suicidal ideation. All three discrimination latent classes had significantly higher depressive symptoms compared to the low discrimination class. Multiple attributes of discrimination and bullying co-occur among adolescents. Research should consider the co-occurrence of bullying and discrimination.
Whiteside, Lauren K.; Ranney, Megan L.; Chermack, Stephen T.; Zimmerman, Marc A.; Cunningham, Rebecca M.; Walton, Maureen A.
2013-01-01
Objective: The purpose of this study was to identify overlap and violence types between peer and dating aggression and victimization using latent class analysis (LCA) among a sample of aggressive adolescents with a history of alcohol use and to identify risk and protective factors associated with each violence class. Method: From September 2006 to September 2009, a systematic sample of patients (14–18 years old) seeking care in an urban emergency department were approached. Adolescents reporting any past-year alcohol use and aggression completed a survey using validated measures including types of violence (severe and moderate aggression, severe and moderate victimization with both peers and dating partners). Using LCA, violence classes were identified; correlates of membership in each LCA class were determined. Results: Among this sample (n = 694), LCA identified three classes described as (a) peer aggression (PA) (52.2%), (b) peer aggression + peer victimization (PAPV) (18.6%), and (c) multiple domains of violence (MDV) (29.3%). Compared with those in the PA class, those in the PAPV class were more likely to be male, report injury in a fight, and have delinquent peers. Compared with the PA class, those in the MDV class were more likely to be female, African American, report injury in a fight, carry a weapon, experience negative consequences from alcohol use, and have delinquent peers and more family conflict. Compared with the PAPV class, those in the MDV class were likely to be female, African American, receive public assistance, carry a weapon, experience negative consequences from alcohol use, and use marijuana. Conclusions: There is extensive overlap of victimization and aggression in both peer and dating relationships. Also, those with high rates of violence across relationships have increased alcohol misuse and marijuana use. Thus, violence-prevention efforts should consider addressing concomitant substance use. PMID:23200158
Corton, Marta; Avila-Fernandez, Almudena; Vallespín, Elena; López-Molina, María Isabel; Almoguera, Berta; Martín-Garrido, Esther; Tatu, Sorina D; Khan, M Imran; Blanco-Kelly, Fiona; Riveiro-Alvarez, Rosa; Brión, María; García-Sandoval, Blanca; Cremers, Frans P M; Carracedo, Angel; Ayuso, Carmen
2014-01-01
We aimed to identify novel genetic defects in the LCA5 gene underlying Leber congenital amaurosis (LCA) in the Spanish population and to describe the associated phenotype. Case series. A cohort of 217 unrelated Spanish families affected by autosomal recessive or isolated retinal dystrophy, that is, 79 families with LCA and 138 families with early-onset retinitis pigmentosa (EORP). A total of 100 healthy, unrelated Spanish individuals were screened as controls. High-resolution homozygosity mapping was performed in 44 patients with LCA using genome-wide single nucleotide polymorphism (SNP) microarrays. Direct sequencing of the LCA5 gene was performed in 5 patients who showed homozygous regions at chromosome 6 and in 173 unrelated individuals with LCA or EORP. The ophthalmic history of 8 patients carrying LCA5 mutations was reviewed and additional examinations were performed, including electroretinography (ERG), optical coherence tomography (OCT), and fundus photography. Single nucleotide polymorphism genotyping, identity-by-descent (IBD) regions, LCA5 mutations, best-corrected visual acuity, visual field assessments, fundus appearance, ERG, and OCT findings. Four novel and 2 previously reported LCA5 mutations have been identified in 6 unrelated families with LCA by homozygosity mapping or Sanger sequencing. Thus, LCA5 mutations have a frequency of 7.6% in the Spanish population. However, no LCA5 mutations were found in 138 patients with EORP. Although most of the identified LCA5 mutations led to a truncated protein, a likely pathogenic missense variant was identified for the first time as a cause of LCA, segregating in 2 families. We also have characterized a novel splicing site mutation at the RNA level, demonstrating that the mutant LCA5 transcript was absent in a patient. All patients carrying LCA5 mutations presented nystagmus, night blindness, and progressive loss of visual acuity and visual field leading to blindness toward the third decade of life. Fundoscopy showed fundus features of pigmentary retinopathy with atrophic macular lesions. This work reveals a higher frequency of LCA5 mutations in a Spanish LCA cohort than in other populations. This study established gene-specific frequencies and the underlying phenotype of LCA5 mutations in the Spanish population. Copyright © 2014 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.
Hiloidhari, Moonmoon; Baruah, D C; Singh, Anoop; Kataki, Sampriti; Medhi, Kristina; Kumari, Shilpi; Ramachandra, T V; Jenkins, B M; Thakur, Indu Shekhar
2017-10-01
Sustainability of a bioenergy project depends on precise assessment of biomass resource, planning of cost-effective logistics and evaluation of possible environmental implications. In this context, this paper reviews the role and applications of geo-spatial tool such as Geographical Information System (GIS) for precise agro-residue resource assessment, biomass logistic and power plant design. Further, application of Life Cycle Assessment (LCA) in understanding the potential impact of agro-residue bioenergy generation on different ecosystem services has also been reviewed and limitations associated with LCA variability and uncertainty were discussed. Usefulness of integration of GIS into LCA (i.e. spatial LCA) to overcome the limitations of conventional LCA and to produce a holistic evaluation of the environmental benefits and concerns of bioenergy is also reviewed. Application of GIS, LCA and spatial LCA can help alleviate the challenges faced by ambitious bioenergy projects by addressing both economics and environmental goals. Copyright © 2017 Elsevier Ltd. All rights reserved.
Goodwin, L; Gazard, B; Aschan, L; MacCrimmon, S; Hotopf, M; Hatch, S L
2017-04-09
Inequalities in mental health are well documented using individual social statuses such as socioeconomic status (SES), ethnicity and migration status. However, few studies have taken an intersectional approach to investigate inequalities in mental health using latent class analysis (LCA). This study will examine the association between multiple indicator classes of social identity with common mental disorder (CMD). Data on CMD symptoms were assessed in a diverse inner London sample of 1052 participants in the second wave of the South East London Community Health study. LCA was used to define classes of social identity using multiple indicators of SES, ethnicity and migration status. Adjusted associations between CMD and both individual indicators and multiple indicators of social identity are presented. LCA identified six groups that were differentiated by varying levels of privilege and disadvantage based on multiple SES indicators. This intersectional approach highlighted nuanced differences in odds of CMD, with the economically inactive group with multiple levels of disadvantage most likely to have a CMD. Adding ethnicity and migration status further differentiated between groups. The migrant, economically inactive and White British, economically inactive classes both had increased odds of CMD. This is the first study to examine the intersections of SES, ethnicity and migration status with CMD using LCA. Results showed that both the migrant, economically inactive and the White British, economically inactive classes had a similarly high prevalence of CMD. Findings suggest that LCA is a useful methodology for investigating health inequalities by intersectional identities.
Optical pendulum generator based on photomechanical liquid-crystalline actuators.
Tang, Rong; Liu, Ziyi; Xu, Dandan; Liu, Jian; Yu, Li; Yu, Haifeng
2015-04-29
For converting light energy into electricity, an optical pendulum generator was designed by combining photomechanical movement of liquid-crystalline actuator (LCA) with Faraday's law of electromagnetic induction. Bilayer cantilever actuators were first fabricated with LDPE and LCA. Their photomechanical movement drove the attached copper coils to cut magnetic line of force generating electricity. The output electricity was proportional to the changing rate of the magnetic flux, which was greatly influenced by light intensity, film thickness, and sample size. Continuous electrical output was also achieved. This simple strategy may expand applications of photoactive materials in the capture and storage of light energy.
LCA – Unique and Controversial Case Studies
This session will focus on case studies and applications that have a unique or controversial aspect. Some of the most recent topics that seem to have significant interest include: LCA-based product declarations, LCA-based standards, LCA-based labels, alternative energy, agricul...
Transportation Life Cycle Assessment (LCA) Synthesis, Phase II
DOT National Transportation Integrated Search
2018-04-24
The Transportation Life Cycle Assessment (LCA) Synthesis includes an LCA Learning Module Series, case studies, and analytics on the use of the modules. The module series is a set of narrated slideshows on topics related to environmental LCA. Phase I ...
Garnett, Bernice R; Masyn, Katherine E; Austin, S Bryn; Williams, David R; Viswanath, Kasisomayajula
2015-02-01
We used a latent class analysis (LCA) to characterize coping styles of urban youth and examined if coping styles moderated the association between experiencing discrimination and bullying and depressive symptoms. The data come from the 2006 Boston Youth Survey, where students were asked to select 2 behaviors they do most often when they are upset, from a list of 15 options. A total of 927 (75%) students contributed to the LCA analytic sample (44% non-Hispanic Blacks, 29% Hispanics, and 58% girls). Relative and absolute fit indices determined the number of classes. An interaction term between types of discrimination and bullying experienced and coping style tested for moderation. The LCA revealed that a 3-class solution had the best fit (Lo-Mendell-Rubin likelihood ratio test, 4-class vs 3-class, p-value .12). The largest coping style class was characterized by high endorsement of distractive coping strategies (59%), the second class was characterized by using supportive coping strategies (27%), and the third class was characterized by using avoidance coping strategies (12%). We found a significant interaction between discrimination and coping style for depressive symptoms. The relationship between experiencing discrimination and depression varied based on coping style and the type of discrimination and bullying experienced. © 2015, American School Health Association.
Mizanur, Rahman M; Frasca, Verna; Swaminathan, Subramanyam; Bavari, Sina; Webb, Robert; Smith, Leonard A; Ahmed, S Ashraf
2013-08-16
Botulinum neurotoxins are the most toxic of all compounds. The toxicity is related to a poor zinc endopeptidase activity located in a 50-kDa domain known as light chain (Lc) of the toxin. The C-terminal tail of Lc is not visible in any of the currently available x-ray structures, and it has no known function but undergoes autocatalytic truncations during purification and storage. By synthesizing C-terminal peptides of various lengths, in this study, we have shown that these peptides competitively inhibit the normal catalytic activity of Lc of serotype A (LcA) and have defined the length of the mature LcA to consist of the first 444 residues. Two catalytically inactive mutants also inhibited LcA activity. Our results suggested that the C terminus of LcA might interact at or near its own active site. By using synthetic C-terminal peptides from LcB, LcC1, LcD, LcE, and LcF and their respective substrate peptides, we have shown that the inhibition of activity is specific only for LcA. Although a potent inhibitor with a Ki of 4.5 μm, the largest of our LcA C-terminal peptides stimulated LcA activity when added at near-stoichiometric concentration to three versions of LcA differing in their C-terminal lengths. The result suggested a product removal role of the LcA C terminus. This suggestion is supported by a weak but specific interaction determined by isothermal titration calorimetry between an LcA C-terminal peptide and N-terminal product from a peptide substrate of LcA. Our results also underscore the importance of using a mature LcA as an inhibitor screening target.
Morin, Alexandre J S; Arens, A Katrin; Tracey, Danielle; Parker, Philip D; Ciarrochi, Joseph; Craven, Rhonda G; Maïano, Christophe
2017-11-01
This study examines the development of self-esteem in a sample of 138 Australian adolescents (90 males; 48 females) with cognitive abilities in the lowest 15% (L-CA) and a matched sample of 556 Australian adolescents (312 males; 244 females) with average to high levels of cognitive abilities (A/H-CA). These participants were measured annually (Grade 7 to 12). The findings showed that adolescents with L-CA and A/H-CA experience similar high and stable self-esteem trajectories that present similar relations with key predictors (sex, school usefulness and dislike, parenting, and peer integration). Both groups revealed substantial gender differences showing higher levels of self-esteem for adolescent males remaining relatively stable over time, compared to lower levels among adolescent females which decreased until midadolescence before increasing back.
Nakajima, Masashi; Hiraoka, Takahiro; Yamamoto, Toshiya; Takagi, Seiu; Hirohara, Yoko; Oshika, Tetsuro; Mihashi, Toshifumi
2016-01-01
Several researchers have studied the longitudinal chromatic aberration (LCA) of eyes implanted with an intraocular lens (IOL). We investigated the LCA of eyes implanted with yellow-colored IOLs from three different manufacturers: Alcon Inc., HOYA Corp., and AMO Inc. The number of subjects was 11, 16, and 16, respectively. The LCA of eyes implanted with SN60WF and SN60AT (Alcon Inc.), and with XY-1 (HOYA Corp.), was the same as that of phakic eyes. The LCA of eyes with ZCB00V (AMO Inc.) was smaller than that of phakic eyes. The LCA of eyes implanted with Alcon's and HOYA's IOLs, but not the LCA of eyes implanted with AMO's IOLs, was positively correlated with the powers of the IOLs. We also performed simulations to verify the impacts of LCA on visual performance for 4-mm pupil diameter; the simulations were a polychromatic modulation transfer function (MTF) and a visual Strehl ratio computed on the basis of an optical transfer function (VSOTF). We concluded that the differences between the LCA of different manufacturers do not affect visual performances when some extent of higher-order aberration (HOA) exists. The smaller HOA of AMO IOLs may enhance visual performance.
NREL: U.S. Life Cycle Inventory Database - Related Links
) information, LCA tools, research institutes utilizing LCA, labeling initiatives and organizations , international LCA initiatives, LCA online forums. Life Cycle Inventory Data Ecoinvent: Swiss Centre for Life Institute for Environmental Research and Education): The American Center for Life Cycle Assessment SETAC
Workshop on LCA: Methodology, Current Development, and Application in Standards - LCA Methodology
As ASTM standards are being developed including Life Cycle Assessment within the Standards it is imperative that practitioners in the field learn more about what LCA is, and how to conduct it. This presentation will include an overview of the LCA process and will concentrate on ...
Are all risks equal? Early experiences of poverty-related risk and children's functioning.
Roy, Amanda L; Raver, C Cybele
2014-06-01
Using cumulative risk and latent class analysis (LCA) models, we examined how exposure to deep poverty (income-to-needs ratio <0.50) and 4 poverty-related risks (i.e., single-parent household, residential crowding, caregiver depression, and multiple life stressors) in preschool is related to children's future difficulty in school in a longitudinal sample of 602 Head Start-enrolled, low-income families. Results from the LCA revealed 4 risk profiles: low risk, deep poverty and single, single and stressed, and deep poverty and crowded household. Tests of measurement invariance across racial/ethnic groups established that, although patterns of risk are similar across groups (i.e., risks covary in the same way), the prevalence of risk profiles differs. African American families were overrepresented in the "deep poverty and single" profile while Latino and White families were overrepresented in the "deep poverty and crowded" profile. Finally, children's third grade functioning in 3 domains (i.e., academic performance, behavior problems, and self-regulatory skills) was predicted using a cumulative risk index and LCA-identified risk profiles. Both approaches demonstrated that children who experienced higher levels of risk in preschool had worse school performance than children with low levels of risk. However, LCA also revealed that children who experienced "single and stressed" family settings had more behavior problems than low-risk children while children who experienced "deep poverty and crowded" family settings had worse academic performance. The results indicate that all risks are not equal for children's development and highlight the utility of LCA for tailoring intervention efforts to best meet the needs of target populations. PsycINFO Database Record (c) 2014 APA, all rights reserved
Are All Risks Equal? Early Experiences of Poverty-Related Risk and Children’s Functioning
Roy, Amanda L.; Raver, C. Cybele
2014-01-01
Using cumulative risk and latent class analysis (LCA) models, this research examines how exposure to deep poverty (income-to-needs ratio <.50) and four poverty-related risks (single-parent household, residential crowding, caregiver depression, and multiple life stressors) in preschool is related to children’s future difficulty in school in a longitudinal sample of 602 Head-Start enrolled, low-income families. Results from the LCA revealed four risk profiles: low risk, deep poverty and single, single and stressed, and deep poverty and crowded household. Tests of measurement invariance across racial/ethnic groups established that although patterns of risk are similar across groups (i.e. risks co-vary in the same way), the prevalence of risk profiles differ. African American families were over-represented in the ‘deep poverty and single’ profile while Latino and White families were over-represented in the ‘deep poverty and crowded’ profile. Finally, children’s third grade functioning in three domains (academic performance, behavior problems, self-regulatory skills) was predicted using a cumulative risk index and LCA identified risk profiles. Both approaches demonstrated that children who experienced higher levels of risk in preschool had worse school performance than children with low levels of risk. However, the LCA also revealed that children who experienced ‘single and stressed’ family settings had more behavior problems than low risk children while children who experienced ‘deep poverty and crowded’ family settings had worse academic performance. The results indicate that all risks are not equal for children’s development and highlight the utility of LCA for tailoring intervention efforts to best meet the needs of target populations. PMID:24749652
On 24 September 2003, life cycle assessment (LCA) practitioners and decision makers gathered at the InLCA/LCM Conference in Seattle, Washington, USA (see http://www.lcacenter.org/InLCA-LCM03/index.html) to discuss the role of LCA in management, product design, process development...
Yadav, Pooja; Samadder, S R
2017-04-01
This study reviewed the municipal solid waste (MSW) composition, the management practices, and the use of life cycle assessment (LCA) tool for MSW management (MSWM) options in the various income group countries. LCA studies require inventory data, which is difficult to procure for any country including higher income group countries, and this issue gets compounded in low-income and lower middle-income group countries, which limits the implementation of LCA. This paper compared the use of LCA for MSWM between high-income and low-income group countries and also highlights the gap in using LCA for MSWM. A very limited number of LCA studies on MSWM were found for low-income group countries in comparison to high-income group countries. The study also provided a critical discussion on the challenges in applications of LCA in MSWM for better solid waste management in low-income and lower middle-income group countries. The study will help in taking up LCA studies in low-income countries to improve the overall MSWM efficiency.
Nakajima, Masashi; Hiraoka, Takahiro; Yamamoto, Toshiya; Takagi, Seiu; Hirohara, Yoko; Oshika, Tetsuro
2016-01-01
Several researchers have studied the longitudinal chromatic aberration (LCA) of eyes implanted with an intraocular lens (IOL). We investigated the LCA of eyes implanted with yellow-colored IOLs from three different manufacturers: Alcon Inc., HOYA Corp., and AMO Inc. The number of subjects was 11, 16, and 16, respectively. The LCA of eyes implanted with SN60WF and SN60AT (Alcon Inc.), and with XY-1 (HOYA Corp.), was the same as that of phakic eyes. The LCA of eyes with ZCB00V (AMO Inc.) was smaller than that of phakic eyes. The LCA of eyes implanted with Alcon’s and HOYA’s IOLs, but not the LCA of eyes implanted with AMO’s IOLs, was positively correlated with the powers of the IOLs. We also performed simulations to verify the impacts of LCA on visual performance for 4-mm pupil diameter; the simulations were a polychromatic modulation transfer function (MTF) and a visual Strehl ratio computed on the basis of an optical transfer function (VSOTF). We concluded that the differences between the LCA of different manufacturers do not affect visual performances when some extent of higher-order aberration (HOA) exists. The smaller HOA of AMO IOLs may enhance visual performance. PMID:27258141
Considering time in LCA: dynamic LCA and its application to global warming impact assessments.
Levasseur, Annie; Lesage, Pascal; Margni, Manuele; Deschênes, Louise; Samson, Réjean
2010-04-15
The lack of temporal information is an important limitation of life cycle assessment (LCA). A dynamic LCA approach is proposed to improve the accuracy of LCA by addressing the inconsistency of temporal assessment. This approach consists of first computing a dynamic life cycle inventory (LCI), considering the temporal profile of emissions. Then, time-dependent characterization factors are calculated to assess the dynamic LCI in real-time impact scores for any given time horizon. Although generally applicable to any impact category, this approach is developed here for global warming, based on the radiative forcing concept. This case study demonstrates that the use of global warming potentials for a given time horizon to characterize greenhouse gas emissions leads to an inconsistency between the time frame chosen for the analysis and the time period covered by the LCA results. Dynamic LCA is applied to the US EPA LCA on renewable fuels, which compares the life cycle greenhouse gas emissions of different biofuels with fossil fuels including land-use change emissions. The comparison of the results obtained with both traditional and dynamic LCA approaches shows that the difference can be important enough to change the conclusions on whether or not a biofuel meets some given global warming reduction targets.
Superhydrogels of nanotubes capable of capturing heavy-metal ions.
Song, Shasha; Wang, Haiqiao; Song, Aixin; Hao, Jingcheng
2014-01-01
Self-assembly regulated by hydrogen bonds was successfully achieved in the system of lithocholic acid (LCA) mixed with three organic amines, ethanolamine (EA), diethanolamine (DEA), and triethanolamine (TEA), in aqueous solutions. The mixtures of DEA/LCA exhibit supergelation capability and the hydrogels consist of plenty of network nanotubes with uniform diameters of about 60 nm determined by cryogenic TEM. Interestingly, the sample with the same concentration in a system of EA and LCA is a birefringent solution, in which spherical vesicles and can be transformed into nanotubes as the amount of LCA increases. The formation of hydrogels could be driven by the delicate balance of diverse noncovalent interactions, including electrostatic interactions, hydrophobic interactions, steric effects, van der Waals forces, and mainly hydrogen bonds. The mechanism of self-assembly from spherical bilayer vesicles into nanotubes was proposed. The dried hydrogels with nanotubes were explored to exhibit the excellent capability for capturing heavy-metal ions, for example, Cu(2+), Co(2+), Ni(2+), Pb(2+), and Hg(2+). The superhydrogels of nanotubes from the self-assembly of low-molecular-weight gelators mainly regulated by hydrogen bonds used for the removal of heavy-metal ions is simple, green, and high efficiency, and provide a strategic approach to removing heavy-metal ions from industrial sewage. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
A Systematic Evaluation of ADHD and Comorbid Psychopathology in a Population-Based Twin Sample
ERIC Educational Resources Information Center
Volk, Heather E.; Neuman, Rosalind J.; Todd, Richard D.
2005-01-01
Objective: Clinical and population samples demonstrate that attention-deficit/hyperactivity disorder (ADHD) occurs with other disorders. Comorbid disorder clustering within ADHD subtypes is not well studied. Method: Latent class analysis (LCA) examined the co-occurrence of DSM-IV ADHD, oppositional defiant disorder (ODD), conduct disorder (CD),…
Stochastic Stability of Sampled Data Systems with a Jump Linear Controller
NASA Technical Reports Server (NTRS)
Gonzalez, Oscar R.; Herencia-Zapana, Heber; Gray, W. Steven
2004-01-01
In this paper an equivalence between the stochastic stability of a sampled-data system and its associated discrete-time representation is established. The sampled-data system consists of a deterministic, linear, time-invariant, continuous-time plant and a stochastic, linear, time-invariant, discrete-time, jump linear controller. The jump linear controller models computer systems and communication networks that are subject to stochastic upsets or disruptions. This sampled-data model has been used in the analysis and design of fault-tolerant systems and computer-control systems with random communication delays without taking into account the inter-sample response. This paper shows that the known equivalence between the stability of a deterministic sampled-data system and the associated discrete-time representation holds even in a stochastic framework.
Chang, Bo
2016-01-01
Leber's congenital amaurosis (LCA) is an inherited retinal degenerative disease characterized by severe loss of vision in the first year of life. In addition to early vision loss, a variety of other eye-related abnormalities including roving eye movements, deep-set eyes, and sensitivity to bright light also occur with this disease. Many animal models of LCA are available and the study them has led to a better understanding of the pathology of the disease, and has led to the development of therapeutic strategies aimed at curing or slowing down LCA. Mouse models, with their well-developed genetics and similarity to human physiology and anatomy, serve as powerful tools with which to investigate the etiology of human LCA. Such mice provide reproducible, experimental systems for elucidating pathways of normal development, function, designing strategies and testing compounds for translational research and gene-based therapies aimed at delaying the diseases progression. In this chapter, I describe tools used in the discovery and evaluation of mouse models of LCA including a Phoenix Image-Guided Optical Coherence Tomography (OCT) and a Diagnosys Espion Visual Electrophysiology System. Three mouse models are described, the rd3 mouse model for LCA12 and LCA1, the rd12 mouse model for LCA2, and the rd16 mouse model for LCA10.
The original goal of the Streamlined LCA workgroup was to define and document a process for a shortened form of LCA. At the time, because of the large amount of data needed to do a cradle-to-grave evaluation, it was believed that in addition to such a "full" LCA approach there w...
Practical LCA for short shelf life products
NASA Astrophysics Data System (ADS)
Laurin, Lise; Goedkoop, Mark; Norris, Greg
2005-11-01
Manufacturers in many of today's industries are faced with product shelf life counted in months. Traditionally, this has made it very difficult to make a life cycle assessment (LCA) of a product, since the product would be obsolete by the time the LCA was completed. A new concept in LCA that allows specialists in things other than LCA to rapidly create both a model and generate "what-if" scenarios will allow even manufacturers of short shelf life products take advantage of the benefits of LCA. These industry-specific "wizards" are built around a manufacturing process and can be rapidly updated or customized to a particular manufacturer or process type. Results can be used internally for decision-making and can also enable manufacturers submit information for environmentally preferable purchasing, eco-labels, etc.
Ungvari, Gabor S; Goggins, William; Leung, Siu-Kau; Lee, Edwin; Gerevich, Jozsef
2009-02-01
No reports have yet been published on catatonia using latent class analysis (LCA). This study applied LCA to a large, diagnostically homogenous sample of patients with chronic schizophrenia who also presented with catatonic symptoms. A random sample of 225 Chinese inpatients with DSM-IV schizophrenia was selected from the long-stay wards of a psychiatric hospital. Their psychopathology, extrapyramidal motor status and level of functioning were evaluated with standardized rating scales. Catatonia was rated using a modified version of the Bush-Francis Catatonia Rating Scale. LCA was then applied to the 178 patients who presented with at least one catatonic sign. In LCA a four-class solution was found to fit best the statistical model. Classes 1, 2, 3 and 4 constituted 18%, 39.4%, 20.1% and 22.5% of the whole catatonic sample, respectively. Class 1 included patients with symptoms of 'automatic' phenomena (automatic obedience, Mitgehen, waxy flexibility). Class 2 comprised patients with 'repetitive/echo' phenomena (perseveration, stereotypy, verbigeration, mannerisms and grimacing). Class 3 contained patients with symptoms of 'withdrawal' (immobility, mutism, posturing, staring and withdrawal). Class 4 consisted of 'agitated/resistive' patients, who displayed symptoms of excitement, impulsivity, negativism and combativeness. The symptom composition of these 4 classes was nearly identical with that of the four factors identified by factor analysis in the same cohort of subjects in an earlier study. In multivariate regression analysis, the 'withdrawn' class was associated with higher scores on the Scale of Assessment of Negative Symptoms and lower and higher scores for negative and positive items respectively on the Nurses' Observation Scale for Inpatient Evaluation's (NOSIE). The 'automatic' class was associated with lower values on the Simpson-Angus Extrapyramidal Side Effects Scale, and the 'repetitive/echo' class with higher scores on the NOSIE positive items. These results provide preliminary support for the notion that chronic schizophrenia patients with catatonic features can be classified into 4 distinct syndromal groups on the basis of their motor symptoms. Identifying distinct catatonic syndromes would help to find their biological substrates and to develop specific therapeutic measures.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Larrey-Lassalle, Pyrène, E-mail: pyrene.larrey-lassalle@irstea.fr; LGEI, Ecole des mines d'Alès, 6 avenue de Clavières, 30319 Alès Cedex; Catel, Laureline
Life Cycle Assessment (LCA) has been identified in the literature as a promising tool to increase the performance of environmental assessments at different steps in the Environmental Impact Assessment (EIA) procedure. However, few publications have proposed a methodology for an extensive integration, and none have compared the results with existing EIA conclusions without LCA. This paper proposes a comprehensive operational methodology for implementing an LCA within an EIA. Based on a literature review, we identified four EIA steps that could theoretically benefit from LCA implementation, i.e., (a) the environmental comparison of alternatives, (b) the identification of key impacts, (c) themore » impact assessment, and (d) the impact of mitigation measures. For each of these steps, an LCA was implemented with specific goal and scope definitions that resulted in a specific set of indicators. This approach has been implemented in two contrasting Wastewater Treatment Plant (WWTP) projects and compared to existing EIA studies. The results showed that the two procedures, i.e., EIAs with or without inputs from LCA, led to different conclusions. The environmental assessments of alternatives and mitigation measures were not carried out in the original studies and showed that other less polluting technologies could have been chosen. Regarding the scoping step, the selected environmental concerns were essentially different. Global impacts such as climate change or natural resource depletion were not taken into account in the original EIA studies. Impacts other than those occurring on the project site (off-site impacts) were not assessed, either. All these impacts can be significant compared to those initially considered. On the other hand, unlike current LCA applications, EIAs usually address natural and technological risks and neighbourhood disturbances such as noises or odours, which are very important for the public acceptability of projects. Regarding the impact assessment, even if the conclusions of the EIAs with or without LCA were partially common for local on-site impacts, LCA gives crucial additional information on global and off-site impacts and highlights the processes responsible for them. Finally, for all EIA steps investigated, interest in LCA was demonstrated for both WWTP case studies. The feasibility in terms of skills, time and cost of such implementation has also been assessed. - Highlights: • An innovative methodology for a first-stage implementation of LCA in EIA is proposed. • Its applicability is demonstrated on two Wastewater Treatment Plant case studies. • The conclusions for the four EIA steps investigated differ with or without LCA. • LCA provides valuable additional information on 1) global and 2) off-site impacts. • LCA identifies pollution transfers towards a life cycle perspective.« less
LCA in space - current status and future development
NASA Astrophysics Data System (ADS)
Ko, Nathanael; Betten, Thomas; Schestak, Isabel; Gantner, Johannes
2018-06-01
This paper represents the first stage of extending the scope of LCA to space and is intended as a discussion starter. Based on the assumption, that the future and outlast of humanity lies within the exploration and colonisation of space, the LCA methodology as of today, is discussed with regards to its capabilities to cover the impact of human activities in space. Based on this assessment, ideas whether and how LCA can be extended are outlined. Initially, an understanding of additional environmental impacts which occur in space compared to Earth is built up by the means of literature research. The state of the art of space regulations and availability of LCAs in space and for astronautics is clarified as well. Further literature research was conducted on the LCA subtopic of regionalization. Based on this and assumptions regarding future space travel, the suitability of LCA as an assessment method is validated. Afterwards, different potential development phases of LCA towards its applicability in space are defined. For activities in space, the regarded environmental impacts have to be expanded (e.g. space debris, extra-terrestrial life toxicity, etc.). Space regulations, if in place, cover only impacts of space activities on Earth so far. LCAs for space activities are not widespread yet. One reason for this is that the state of the art LCA methodology has not been expanded and existing regionalisation approaches are not easily transferable to space. Critical issues are faced in all phases of an LCA and include widening of boundaries, definition of space regions, finding suitable reference units and ethical problems. As a result, four LCA development phases are suggested: Earth-bound, solar system-bound, transition phase and intergalactic. Each phase involves different activities and goals, which result in different system boundaries and impact categories and widen the scope of LCA subsequently. It is a long way for humanity to populate space and so, it is for enabling LCA to assess these activities. The methodology of LCA is flexible and capable to make this adaptation. This paper can be seen as a starting point of a discussion opening up many questions. Some of these questions can only be answered in the future with more certainty about the development of space colonialization.
Comparative life cycle assessments: The case of paper and digital media
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bull, Justin G., E-mail: jgbull@gmail.com; Kozak, Robert A., E-mail: rob.kozak@ubc.ca
The consumption of the written word is changing, as media transitions from paper products to digital alternatives. We reviewed the life cycle assessment (LCA) research literature that compared the environmental footprint of digital and paper media. To validate the role of context in influencing LCA results, we assessed LCAs that did not compare paper and print, but focused on a product or component that is part of the Information and Communication Technology (ICT) sector. Using a framework that identifies problems in LCA conduct, we assessed whether the comparative LCAs were accurate expressions of the environmental footprints of paper and print.more » We hypothesized that the differences between the product systems that produce paper and digital media weaken LCA's ability to compare environmental footprints. We also hypothesized that the characteristics of ICT as an industrial sector weaken LCA as an environmental assessment methodology. We found that existing comparative LCAs offered problematic comparisons of paper and digital media for two reasons — the stark material differences between ICT products and paper products, and the unique characteristics of the ICT sector. We suggested that the context of the ICT sector, best captured by the concept of “Moore's Law”, will continuously impede the ability of the LCA methodology to measure ICT products. -- Highlights: • We review the LCA research that compares paper and digital media. • We contrast the comparative LCAs with LCAs that examine only digital products. • Stark differences between paper and digital media weakens LCA findings. • Digital products in general challenge the LCA method's reliability. • Continuous innovation and global nature of digital products impedes LCA methodology.« less
To provide global guidance on the establishment and maintenance of LCA databases, as the basis for improved dataset exchangeability and interlinkages of databases worldwide. Increase the credibility of existing LCA data, the generation of more data and their overall accessibilit...
Binding of bile acids by pastry products containing bioactive substances during in vitro digestion.
Dziedzic, Krzysztof; Górecka, Danuta; Szwengiel, Artur; Smoczyńska, Paulina; Czaczyk, Katarzyna; Komolka, Patrycja
2015-03-01
The modern day consumer tends to choose products with health enhancing properties, enriched in bioactive substances. One such bioactive food component is dietary fibre, which shows a number of physiological properties including the binding of bile acids. Dietary fibre should be contained in everyday, easily accessible food products. Therefore, the aim of this study was to determine sorption capacities of primary bile acid (cholic acid - CA) and secondary bile acids (deoxycholic - DCA and lithocholic acids - LCA) by muffins (BM) and cookies (BC) with bioactive substances and control muffins (CM) and cookies (CC) in two sections of the in vitro gastrointestinal tract. Variations in gut flora were also analysed in the process of in vitro digestion of pastry products in a bioreactor. Enzymes: pepsin, pancreatin and bile salts: cholic acid, deoxycholic acid and lithocholic acid were added to the culture. Faecal bacteria, isolated from human large intestine, were added in the section of large intestine. The influence of dietary fibre content in cookies and concentration of bile acids in two stages of digestion were analysed. Generally, pastry goods with bioactive substances were characterized by a higher content of total fibre compared with the control samples. These products also differ in the profile of dietary fibre fractions. Principal Component Analysis (PCA) showed that the bile acid profile after two stages of digestion depends on the quality and quantity of fibre. The bile acid profile after digestion of BM and BC forms one cluster, and with the CM and CC forms a separate cluster. High concentration of H (hemicellulose) is positively correlated with LCA (low binding effect) and negatively correlated with CA and DCA contents. The relative content of bile acids in the second stage of digestion was in some cases above the content in the control sample, particularly LCA. This means that the bacteria introduced in the 2nd stage of digestion synthesize the LCA.
Duijkers, Lonneke; van den Born, L Ingeborgh; Neidhardt, John; Bax, Nathalie M; Pierrache, Laurence H M; Klevering, B Jeroen; Collin, Rob W J; Garanto, Alejandro
2018-03-07
Leber congenital amaurosis (LCA) is a rare inherited retinal disorder affecting approximately 1:50,000 people worldwide. So far, mutations in 25 genes have been associated with LCA, with CEP290 (encoding the Centrosomal protein of 290 kDa) being the most frequently mutated gene. The most recurrent LCA-causing CEP290 mutation, c.2991+1655A>G, causes the insertion of a pseudoexon into a variable proportion of CEP290 transcripts. We previously demonstrated that antisense oligonucleotides (AONs) have a high therapeutic potential for patients homozygously harbouring this mutation, although to date, it is unclear whether rescuing one single allele is enough to restore CEP290 function. Here, we assessed the AON efficacy at RNA, protein and cellular levels in samples that are compound heterozygous for this mutation, together with a protein-truncating mutation in CEP290 . We demonstrate that AONs can efficiently restore splicing and increase protein levels. However, due to a high variability in ciliation among the patient-derived cell lines, the efficacy of the AONs was more difficult to assess at the cellular level. This observation points towards the importance of the severity of the second allele and possibly other genetic variants present in each individual. Overall, AONs seem to be a promising tool to treat CEP290 -associated LCA, not only in homozygous but also in compound heterozygous carriers of the c.2991+1655A>G variant.
Illustrating anticipatory life cycle assessment for emerging photovoltaic technologies.
Wender, Ben A; Foley, Rider W; Prado-Lopez, Valentina; Ravikumar, Dwarakanath; Eisenberg, Daniel A; Hottle, Troy A; Sadowski, Jathan; Flanagan, William P; Fisher, Angela; Laurin, Lise; Bates, Matthew E; Linkov, Igor; Seager, Thomas P; Fraser, Matthew P; Guston, David H
2014-09-16
Current research policy and strategy documents recommend applying life cycle assessment (LCA) early in research and development (R&D) to guide emerging technologies toward decreased environmental burden. However, existing LCA practices are ill-suited to support these recommendations. Barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. Overcoming these challenges requires methodological advances that help identify environmental opportunities prior to large R&D investments. Such an anticipatory approach to LCA requires synthesis of social, environmental, and technical knowledge beyond the capabilities of current practices. This paper introduces a novel framework for anticipatory LCA that incorporates technology forecasting, risk research, social engagement, and comparative impact assessment, then applies this framework to photovoltaic (PV) technologies. These examples illustrate the potential for anticipatory LCA to prioritize research questions and help guide environmentally responsible innovation of emerging technologies.
Xu, Yan; Xiao, Xueshan; Li, Shiqiang; Jia, Xiaoyun; Xin, Wei; Wang, Panfeng; Sun, Wenmin; Huang, Li; Guo, Xiangming; Zhang, Qingjiong
2016-08-01
Leber congenital amaurosis (LCA) is the most severe form of inherited retinal dystrophy. We have previously performed a mutational analysis of the known LCA-associated genes in probands with LCA by both Sanger and whole exome sequencing. In this study, whole exome sequencing was carried out on 66 new probabds with LCA. In conjunction with these data, the present study provides a comprehensive analysis of the spectrum and frequency of all known genes associated with retinal dystrophy in a total of 159 Chinese probands with LCA. The known genes responsible for all forms hereditary retinal dystrophy were included based on information from RetNet. The candidate variants were filtered by bioinformatics analysis and confirmed by Sanger sequencing. Potentially causative mutations were further validated in available family members. Overall, a total of 118 putative pathogenic mutations from 23 genes were identified in 56.6% (90/159) of probands. These mutations were harbored in 13 LCA-associated genes and in ten genes related to other forms of retinal dystrophy. The most frequently mutated gene in probands with LCA was GUCY2D (10.7%, 17/159). A series of mutational analyses suggests that all known genes associated with retinal dystrophy account for 56.6% of Chinese patients with LCA. A comprehensive molecular genetic analysis of Chinese patients with LCA provides an overview of the spectrum and frequency of ethno-specific mutations of all known genes, as well as indications about other unknown genes in the remaining probands who lacked identified mutations. Copyright © 2016 Elsevier Ltd. All rights reserved.
NON-TRADITIONAL TOOLS FOR LCA AND SUSTAINABILITY
LCA practice focuses on impacts resulting from the release of chemicals into the environment, but consideration of "non-chemical impacts" is as important for LCA, particularly as it relates to sustainability. Methodologies and philosophies exist for addressing non-chemical impact...
Mondal, S.; Pattanaik, A. K.; Verma, A. K.
2017-01-01
Little is known about biological significance of effects of dietary Boron (B) and Calcium (Ca) interaction on health and production of farm animals. This is a preliminary investigation to evaluate the effects of B supplementation in lambs fed diets with (normal) or without adequate (low) levels of Ca. Twenty-four crossbred ram lambs were randomly distributed into four groups with six animals each in a 2x2 factorial design namely, normal-Ca diet (NCa) and low-Ca diet (LCa) fed without or with 40 ppm B (NCaB-40 and LCaB-40). The lambs were fed paddy straw and hybrid napier hay-based total mixed ration (60 roughage: 40 concentrate) during 180 days experimental period. Compared to control, the LCa diet lowered (P<0.01) average daily gain of lambs, but B-supplementation (LCaB-40) of the same nullified the effect. The lowered (P<0.05) total antioxidant activity and humoral immune response in lambs fed LCa diet were restored (P>0.05) to become at par with the control (NCa) upon supplementation of B (LCaB-40). The mRNA expression of SOD1 was lowered (P<0.05) due to LCa diet feeding which too was normalized on B-supplementation to become at par (P>0.05) with the control (NCa). Further, B-supplementation restored lowered (P<0.05) SOD1 gene expression on LCa diet, but enhanced (P<0.05) that in NCaB-40 group, when compared to the control (NCa) diet fed animals. However, these variations were not reflected in the SOD activity in the erythrocytes. The cell-mediated immune response was higher (P<0.05) in lambs fed LCa and LCaB-40 groups and there was no significant interaction between the levels of either Ca or B in diets with the period of immune response measurement. B- supplementation of LCa diet ameliorated tissue degenerative changes in liver and kidney. It was concluded that feeding LCa diet to lambs resulted in reduced growth rate, total antioxidant activity, humoral immune response along with degenerative changes in liver and kidney tissues, but B-supplementation of such diet restored most of these changes and ameliorated histopathological alterations. PMID:29141035
ERIC Educational Resources Information Center
Morin, Alexandre J. S.; Arens, A. Katrin; Tracey, Danielle; Parker, Philip D.; Ciarrochi, Joseph; Craven, Rhonda G.; Maïano, Christophe
2017-01-01
This study examines the development of self-esteem in a sample of 138 Australian adolescents (90 males; 48 females) with cognitive abilities in the lowest 15% (L-CA) and a matched sample of 556 Australian adolescents (312 males; 244 females) with average to high levels of cognitive abilities (A/H-CA). These participants were measured annually…
Effect of sample volume on metastable zone width and induction time
NASA Astrophysics Data System (ADS)
Kubota, Noriaki
2012-04-01
The metastable zone width (MSZW) and the induction time, measured for a large sample (say>0.1 L) are reproducible and deterministic, while, for a small sample (say<1 mL), these values are irreproducible and stochastic. Such behaviors of MSZW and induction time were theoretically discussed both with stochastic and deterministic models. Equations for the distribution of stochastic MSZW and induction time were derived. The average values of stochastic MSZW and induction time both decreased with an increase in sample volume, while, the deterministic MSZW and induction time remained unchanged. Such different behaviors with variation in sample volume were explained in terms of detection sensitivity of crystallization events. The average values of MSZW and induction time in the stochastic model were compared with the deterministic MSZW and induction time, respectively. Literature data reported for paracetamol aqueous solution were explained theoretically with the presented models.
Life cycle implications of urban green infrastructure.
Spatari, Sabrina; Yu, Ziwen; Montalto, Franco A
2011-01-01
Low Impact Development (LID) is part of a new paradigm in urban water management that aims to decentralize water storage and movement functions within urban watersheds. LID strategies can restore ecosystem functions and reduce runoff loadings to municipal water pollution control facilities (WPCF). This research examines the avoided energy and greenhouse gas (GHG) emissions of select LID strategies using life cycle assessment (LCA) and a stochastic urban watershed model. We estimate annual energy savings and avoided GHG emissions of 7.3 GJ and 0.4 metric tons, respectively, for a LID strategy implemented in a neighborhood in New York City. Annual savings are small compared to the energy and GHG intensity of the LID materials, resulting in slow environmental payback times. This preliminary analysis suggests that if implemented throughout an urban watershed, LID strategies may have important energy cost savings to WPCF, and can make progress towards reducing their carbon footprint. Copyright © 2011 Elsevier Ltd. All rights reserved.
Nielsen, Anne Molgaard; Kent, Peter; Hestbaek, Lise; Vach, Werner; Kongsted, Alice
2017-02-01
Heterogeneity in patients with low back pain (LBP) is well recognised and different approaches to subgrouping have been proposed. Latent Class Analysis (LCA) is a statistical technique that is increasingly being used to identify subgroups based on patient characteristics. However, as LBP is a complex multi-domain condition, the optimal approach when using LCA is unknown. Therefore, this paper describes the exploration of two approaches to LCA that may help improve the identification of clinically relevant and interpretable LBP subgroups. From 928 LBP patients consulting a chiropractor, baseline data were used as input to the statistical subgrouping. In a single-stage LCA, all variables were modelled simultaneously to identify patient subgroups. In a two-stage LCA, we used the latent class membership from our previously published LCA within each of six domains of health (activity, contextual factors, pain, participation, physical impairment and psychology) (first stage) as the variables entered into the second stage of the two-stage LCA to identify patient subgroups. The description of the results of the single-stage and two-stage LCA was based on a combination of statistical performance measures, qualitative evaluation of clinical interpretability (face validity) and a subgroup membership comparison. For the single-stage LCA, a model solution with seven patient subgroups was preferred, and for the two-stage LCA, a nine patient subgroup model. Both approaches identified similar, but not identical, patient subgroups characterised by (i) mild intermittent LBP, (ii) recent severe LBP and activity limitations, (iii) very recent severe LBP with both activity and participation limitations, (iv) work-related LBP, (v) LBP and several negative consequences and (vi) LBP with nerve root involvement. Both approaches identified clinically interpretable patient subgroups. The potential importance of these subgroups needs to be investigated by exploring whether they can be identified in other cohorts and by examining their possible association with patient outcomes. This may inform the selection of a preferred LCA approach.
Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives
DOE Office of Scientific and Technical Information (OSTI.GOV)
Laurent, Alexis, E-mail: alau@dtu.dk; Bakas, Ioannis; Clavreul, Julie
Highlights: • We perform a critical review of 222 LCA studies of solid waste management systems. • Studies mainly concentrated in Europe with little application in developing countries. • Assessments of relevant waste types apart from household waste have been overlooked. • Local specificities of systems prevent a meaningful generalisation of the LCA results. • LCA should support recommendations representative of the local conditions. - Abstract: The continuously increasing solid waste generation worldwide calls for management strategies that integrate concerns for environmental sustainability. By quantifying environmental impacts of systems, life cycle assessment (LCA) is a tool, which can contribute tomore » answer that call. But how, where and to which extent has it been applied to solid waste management systems (SWMSs) until now, and which lessons can be learnt from the findings of these LCA applications? To address these questions, we performed a critical review of 222 published LCA studies of SWMS. We first analysed the geographic distribution and found that the published studies have primarily been concentrated in Europe with little application in developing countries. In terms of technological coverage, they have largely overlooked application of LCA to waste prevention activities and to relevant waste types apart from household waste, e.g. construction and demolition waste. Waste management practitioners are thus encouraged to abridge these gaps in future applications of LCA. In addition to this contextual analysis, we also evaluated the findings of selected studies of good quality and found that there is little agreement in the conclusions among them. The strong dependence of each SWMS on local conditions, such as waste composition or energy system, prevents a meaningful generalisation of the LCA results as we find it in the waste hierarchy. We therefore recommend stakeholders in solid waste management to regard LCA as a tool, which, by its ability of capturing the local specific conditions in the modelling of environmental impacts and benefits of a SWMS, allows identifying critical problems and proposing improvement options adapted to the local specificities.« less
LIFE CYCLE ASSESSMENT: PRINCIPLES AND PRACTICE
The following document provides an introductory overview of Life Cycle Assessment (LCA) and describes the general uses and major components of LCA. This document is an update and merger of two previous EPA documents on LCA ("Life Cycle Assessment: Inventory Guidelines and Princip...
CASE STUDIES EXAMINING LCA STREAMLINING TECHNIQUES
Pressure is mounting for more streamlined Life Cycle Assessment (LCA) methods that allow for evaluations that are quick and simple, but accurate. As part of an overall research effort to develop and demonstrate streamlined LCA, the U.S. Environmental Protection Agency has funded ...
NASA Astrophysics Data System (ADS)
Toney, Jaime L.; Theroux, Susanna; Andersen, Robert A.; Coleman, Annette; Amaral-Zettler, Linda; Huang, Yongsong
2012-02-01
Long chain alkenones (LCAs) are potential biomarkers for quantitative paleotemperature reconstructions from lacustrine environments. However, progress in this area has been hindered, because the conditions necessary for the growth of haptophytes responsible for alkenone distributions in lake sediments: the predominance of C 37:4 LCA are not known. Here we report the first enrichment culturing of a novel haptophyte phylotype (Hap-A) from Lake George, ND that produces predominantly C 37:4-LCA. Hap-A was enriched from its resting phase collected from deep sediments rather than from water column samples. In contrast, enrichments from near surface water yielded a different haptophyte phylotype (Hap-B), closely related to Chrysotila lamellosa and Pseudoisochrysis paradoxa, which does not display C 37:4-LCA predominance (similar enrichments have been reported previously). The LCA profile in sediments resembles that of enrichments containing Hap-A, suggesting that Hap-A is the dominant alkenone producer of the sedimentary LCAs. In enrichments, increased lighting appeared to be crucial for triggering alkenone production. Both U37K and U38K indices show a promising, positive relationship with temperature for Hap-A in enrichments, but the offset from the environmental calibration suggests that other factors (e.g., the growth stage or nutrients) may influence the absolute U37K value. Based on 18S rRNA gene analyses, several lakes from the Northern Great Plains, as well as Pyramid Lake, NV and Tso Ur, Tibetan Plateau, China contain the same two haptophyte phylotypes. Analysis of surface sediment from the Great Plains lakes show the Hap-A-type LCA distribution, whereas Pyramid and Tso Ur show the Hap-B type distribution. Waters of the Great Plain lakes are dominated by sulfate ions, whereas those Pyramid and Tso Ur are dominated by carbonate ions, suggesting that the sulfate to carbonate ratio may be a determining factor for the dominance of the Hap-A and Hap-B phylotypes in natural settings.
Occurence of internet addiction in a general population sample: a latent class analysis.
Rumpf, Hans-Jürgen; Vermulst, Ad A; Bischof, Anja; Kastirke, Nadin; Gürtler, Diana; Bischof, Gallus; Meerkerk, Gert-Jan; John, Ulrich; Meyer, Christian
2014-01-01
Prevalence studies of Internet addiction in the general population are rare. In addition, a lack of approved criteria hampers estimation of its occurrence. This study conducted a latent class analysis (LCA) in a large general population sample to estimate prevalence. A telephone survey was conducted based on a random digit dialling procedure including landline telephone (n=14,022) and cell phone numbers (n=1,001) in participants aged 14-64. The Compulsive Internet Use Scale (CIUS) served as the basis for a LCA used to look for subgroups representing participants with Internet addiction or at-risk use. CIUS was given to participants reporting to use the Internet for private purposes at least 1 h on a typical weekday or at least 1 h on a day at the weekend (n=8,130). A 6-class model showed best model fit and included two groups likely to represent Internet addiction and at-risk Internet use. Both groups showed less social participation and the Internet addiction group less general trust in other people. Proportions of probable Internet addiction were 1.0% (CI 0.9-1.2) among the entire sample, 2.4% (CI 1.9-3.1) in the age group 14-24, and 4.0% (CI 2.7-5.7) in the age group 14-16. No difference in estimated proportions between males and females was found. Unemployment (OR 3.13; CI 1.74-5.65) and migration background (OR 3.04; CI 2.12-4.36) were related to Internet addiction. This LCA-based study differentiated groups likely to have Internet addiction and at-risk use in the general population and provides characteristics to further define this rather new disorder. © 2013 S. Karger AG, Basel.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Allegrini, E., E-mail: elia@env.dtu.dk; Butera, S.; Kosson, D.S.
Highlights: • Relevance of metal leaching in waste management system LCAs was assessed. • Toxic impacts from leaching could not be disregarded. • Uncertainty of toxicity, due to background activities, determines LCA outcomes. • Parameters such as pH and L/S affect LCA results. • Data modelling consistency and coverage within an LCA are crucial. - Abstract: Residues from industrial processes and waste management systems (WMSs) have been increasingly reutilised, leading to landfilling rate reductions and the optimisation of mineral resource utilisation in society. Life cycle assessment (LCA) is a holistic methodology allowing for the analysis of systems and products andmore » can be applied to waste management systems to identify environmental benefits and critical aspects thereof. From an LCA perspective, residue utilisation provides benefits such as avoiding the production and depletion of primary materials, but it can lead to environmental burdens, due to the potential leaching of toxic substances. In waste LCA studies where residue utilisation is included, leaching has generally been neglected. In this study, municipal solid waste incineration bottom ash (MSWI BA) was used as a case study into three LCA scenarios having different system boundaries. The importance of data quality and parameter selection in the overall LCA results was evaluated, and an innovative method to assess metal transport into the environment was applied, in order to determine emissions to the soil and water compartments for use in an LCA. It was found that toxic impacts as a result of leaching were dominant in systems including only MSWI BA utilisation, while leaching appeared negligible in larger scenarios including the entire waste system. However, leaching could not be disregarded a priori, due to large uncertainties characterising other activities in the scenario (e.g. electricity production). Based on the analysis of relevant parameters relative to leaching, and on general results of the study, recommendations are provided regarding the use of leaching data in LCA studies.« less
Csiszar, Susan A; Meyer, David E; Dionisio, Kathie L; Egeghy, Peter; Isaacs, Kristin K; Price, Paul S; Scanlon, Kelly A; Tan, Yu-Mei; Thomas, Kent; Vallero, Daniel; Bare, Jane C
2016-11-01
Life Cycle Assessment (LCA) is a decision-making tool that accounts for multiple impacts across the life cycle of a product or service. This paper presents a conceptual framework to integrate human health impact assessment with risk screening approaches to extend LCA to include near-field chemical sources (e.g., those originating from consumer products and building materials) that have traditionally been excluded from LCA. A new generation of rapid human exposure modeling and high-throughput toxicity testing is transforming chemical risk prioritization and provides an opportunity for integration of screening-level risk assessment (RA) with LCA. The combined LCA and RA approach considers environmental impacts of products alongside risks to human health, which is consistent with regulatory frameworks addressing RA within a sustainability mindset. A case study is presented to juxtapose LCA and risk screening approaches for a chemical used in a consumer product. The case study demonstrates how these new risk screening tools can be used to inform toxicity impact estimates in LCA and highlights needs for future research. The framework provides a basis for developing tools and methods to support decision making on the use of chemicals in products.
Curran, Michael; de Souza, Danielle Maia; Antón, Assumpció; Teixeira, Ricardo F M; Michelsen, Ottar; Vidal-Legaz, Beatriz; Sala, Serenella; Milà i Canals, Llorenç
2016-03-15
The modeling of land use impacts on biodiversity is considered a priority in life cycle assessment (LCA). Many diverging approaches have been proposed in an expanding literature on the topic. The UNEP/SETAC Life Cycle Initiative is engaged in building consensus on a shared modeling framework to highlight best-practice and guide model application by practitioners. In this paper, we evaluated the performance of 31 models from both the LCA and the ecology/conservation literature (20 from LCA, 11 from non-LCA fields) according to a set of criteria reflecting (i) model completeness, (ii) biodiversity representation, (iii) impact pathway coverage, (iv) scientific quality, and (v) stakeholder acceptance. We show that LCA models tend to perform worse than those from ecology and conservation (although not significantly), implying room for improvement. We identify seven best-practice recommendations that can be implemented immediately to improve LCA models based on existing approaches in the literature. We further propose building a "consensus model" through weighted averaging of existing information, to complement future development. While our research focuses on conceptual model design, further quantitative comparison of promising models in shared case studies is an essential prerequisite for future informed model choice.
Dantlgraber, Michael; Wetzel, Eunike; Schützenberger, Petra; Stieger, Stefan; Reips, Ulf-Dietrich
2016-09-01
In psychological research, there is a growing interest in using latent class analysis (LCA) for the investigation of quantitative constructs. The aim of this study is to illustrate how LCA can be applied to gain insights on a construct and to select items during test development. We show the added benefits of LCA beyond factor-analytic methods, namely being able (1) to describe groups of participants that differ in their response patterns, (2) to determine appropriate cutoff values, (3) to evaluate items, and (4) to evaluate the relative importance of correlated factors. As an example, we investigated the construct of Facebook addiction using the Facebook Addiction Test (F-AT), an adapted version of the Internet Addiction Test (I-AT). Applying LCA facilitates the development of new tests and short forms of established tests. We present a short form of the F-AT based on the LCA results and validate the LCA approach and the short F-AT with several external criteria, such as chatting, reading newsfeeds, and posting status updates. Finally, we discuss the benefits of LCA for evaluating quantitative constructs in psychological research.
Evaluation of Life Cycle Assessment (LCA) for Roadway Drainage Systems.
Byrne, Diana M; Grabowski, Marta K; Benitez, Amy C B; Schmidt, Arthur R; Guest, Jeremy S
2017-08-15
Roadway drainage design has traditionally focused on cost-effectively managing water quantity; however, runoff carries pollutants, posing risks to the local environment and public health. Additionally, construction and maintenance incur costs and contribute to global environmental impacts. While life cycle assessment (LCA) can potentially capture local and global environmental impacts of roadway drainage and other stormwater systems, LCA methodology must be evaluated because stormwater systems differ from wastewater and drinking water systems to which LCA is more frequently applied. To this end, this research developed a comprehensive model linking roadway drainage design parameters to LCA and life cycle costing (LCC) under uncertainty. This framework was applied to 10 highway drainage projects to evaluate LCA methodological choices by characterizing environmental and economic impacts of drainage projects and individual components (basin, bioswale, culvert, grass swale, storm sewer, and pipe underdrain). The relative impacts of drainage components varied based on functional unit choice. LCA inventory cutoff criteria evaluation showed the potential for cost-based criteria, which performed better than mass-based criteria. Finally, the local aquatic benefits of grass swales and bioswales offset global environmental impacts for four impact categories, highlighting the need to explicitly consider local impacts (i.e., direct emissions) when evaluating drainage technologies.
Communicating about LCA can be challenging. The most effective communication format and the appropriate level of detail depend on the audience and the goal of communication. Who are the audiences, and what is communicated to each audience? When the results of the LCA are to be co...
Life cycle assessment in market, research, and policy: Harmonization beyond standardization.
Zamagni, Alessandra; Cutaia, Laura
2015-07-01
This article introduces the special series "LCA in Market Research and Policy: Harmonization beyond standardization," which was generated from the 19th SETAC Life Cycle Assessment (LCA) Case Study Symposium held November 2013, in Rome, Italy. This collection of invited articles reflects the purpose of symposium and focuses on how LCA can support the decision-making process at all levels (i.e., in industry and policy contexts) and how LCA results can be efficiently communicated and used to support market strategies. © 2015 SETAC.
Medulloblastoma: histopathologic and molecular markers of anaplasia and biologic behavior.
Min, Hye Sook; Lee, You Jeong; Park, Kyeongmee; Cho, Byung-Kyu; Park, Sung-Hye
2006-07-01
Large cell/anaplastic (LC/A) medulloblastoma (MB) is a recently recognized variant of medulloblastoma known to be associated with an advanced stage and a poor prognosis. Although Eberhart et al. suggested histopathologic grading of medulloblastoma in 2002, no consensus has been reached in terms of determining the criteria of an LC/A variant, and its biological behavior continues to be the subject of debate. We retrospectively analyzed 74 cases (range 0.25-15 years) of MB clinicopathologically using the criteria established by Eberhart et al. The LC/A variant was identified in 16 cases (22% of MB cases), five of which showed a poor outcome. Most LC/A variant cases revealed synaptophysin immunoexpression (75%), but no epidermal growth factor receptor (EGFR) expression. Expression of synaptophysin, NeuN, GFAP, p53, c-erbB2, and EGFR did not differ in LC/A and non-LC/A variants. Seven of the 74 cases of medulloblastoma showed erbB2 amplification by FISH, four of which were LC/A variants. N-myc amplification was observed in only one LC/A variant, but no c-myc amplification was found. In patients younger than 10 years, the LC/A variant showed a significantly poorer outcome than the non-LC/A variant (P = 0.02), while no difference was found in older patients. Multivariate analysis revealed only metastasis on MRI and p53 expression, but not anaplasia as unfavorable prognostic factors. Our study suggests that prognostic implications of anaplasia in medulloblastoma are uncertain, and that the reproducibility of the histopathologic criteria of the LC/A variant should be reassessed before they can be applied in practical use.
Symptom Cluster Research With Biomarkers and Genetics Using Latent Class Analysis.
Conley, Samantha
2017-12-01
The purpose of this article is to provide an overview of latent class analysis (LCA) and examples from symptom cluster research that includes biomarkers and genetics. A review of LCA with genetics and biomarkers was conducted using Medline, Embase, PubMed, and Google Scholar. LCA is a robust latent variable model used to cluster categorical data and allows for the determination of empirically determined symptom clusters. Researchers should consider using LCA to link empirically determined symptom clusters to biomarkers and genetics to better understand the underlying etiology of symptom clusters. The full potential of LCA in symptom cluster research has not yet been realized because it has been used in limited populations, and researchers have explored limited biologic pathways.
Autonomous learning in gesture recognition by using lobe component analysis
NASA Astrophysics Data System (ADS)
Lu, Jian; Weng, Juyang
2007-02-01
Gesture recognition is a new human-machine interface method implemented by pattern recognition(PR).In order to assure robot safety when gesture is used in robot control, it is required to implement the interface reliably and accurately. Similar with other PR applications, 1) feature selection (or model establishment) and 2) training from samples, affect the performance of gesture recognition largely. For 1), a simple model with 6 feature points at shoulders, elbows, and hands, is established. The gestures to be recognized are restricted to still arm gestures, and the movement of arms is not considered. These restrictions are to reduce the misrecognition, but are not so unreasonable. For 2), a new biological network method, called lobe component analysis(LCA), is used in unsupervised learning. Lobe components, corresponding to high-concentrations in probability of the neuronal input, are orientation selective cells follow Hebbian rule and lateral inhibition. Due to the advantage of LCA method for balanced learning between global and local features, large amount of samples can be used in learning efficiently.
Metabolism of lithocholic and chenodeoxycholic acids in the squirrel monkey
DOE Office of Scientific and Technical Information (OSTI.GOV)
Suzuki, H.; Hamada, M.; Kato, F.
1985-09-01
Metabolism of lithocholic acid (LCA) and chenodeoxycholic acid (CDCA) was studied in the squirrel monkey to clarify the mechanism of the lack of toxicity of CDCA in this animal. Radioactive LCA was administered to squirrel monkeys with biliary fistula. Most radioactivity was excreted in the bile in the form of unsulfated lithocholyltaurine. The squirrel monkey thus differs from humans and chimpanzees, which efficiently sulfate LCA, and is similar to the rhesus monkey and baboon in that LCA is poorly sulfated. When labeled CDCA was orally administered to squirrel monkeys, less than 20% of the dosed radioactivity was recovered as LCAmore » and its further metabolites in feces over 3 days, indicating that bacterial metabolism of CDCA into LCA is strikingly less than in other animals and in humans. It therefore appears that LCA, known as a hepatotoxic secondary bile acid, is not accumulated in the squirrel monkey, not because of its rapid turnover through sulfation, but because of the low order of its production.« less
Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services
Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen
2017-01-01
International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions. PMID:28429710
Life cycle assessment needs predictive spatial modelling for biodiversity and ecosystem services
NASA Astrophysics Data System (ADS)
Chaplin-Kramer, Rebecca; Sim, Sarah; Hamel, Perrine; Bryant, Benjamin; Noe, Ryan; Mueller, Carina; Rigarlsford, Giles; Kulak, Michal; Kowal, Virginia; Sharp, Richard; Clavreul, Julie; Price, Edward; Polasky, Stephen; Ruckelshaus, Mary; Daily, Gretchen
2017-04-01
International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions.
Evidence of a chimpanzee-sized ancestor of humans but a gibbon-sized ancestor of apes.
Grabowski, Mark; Jungers, William L
2017-10-12
Body mass directly affects how an animal relates to its environment and has a wide range of biological implications. However, little is known about the mass of the last common ancestor (LCA) of humans and chimpanzees, hominids (great apes and humans), or hominoids (all apes and humans), which is needed to evaluate numerous paleobiological hypotheses at and prior to the root of our lineage. Here we use phylogenetic comparative methods and data from primates including humans, fossil hominins, and a wide sample of fossil primates including Miocene apes from Africa, Europe, and Asia to test alternative hypotheses of body mass evolution. Our results suggest, contrary to previous suggestions, that the LCA of all hominoids lived in an environment that favored a gibbon-like size, but a series of selective regime shifts, possibly due to resource availability, led to a decrease and then increase in body mass in early hominins from a chimpanzee-sized LCA.The pattern of body size evolution in hominids can provide insight into historical human ecology. Here, Grabowski and Jungers use comparative phylogenetic analysis to reconstruct the likely size of the ancestor of humans and chimpanzees and the evolutionary history of selection on body size in primates.
Life Cycle Assessment for Proton Conducting Ceramics Synthesized by the Sol-Gel Process.
Lee, Soo-Sun; Hong, Tae-Whan
2014-09-16
In this report, the environmental aspects of producing proton conducting ceramics are investigated by means of the environmental Life Cycle Assessment (LCA) method. The proton conducting ceramics BaZr 0.8 Y 0.2 O 3-δ (BZY), BaCe 0.9 Y 0.1 O 2.95 (BCY10), and Sr(Ce 0.9 Zr 0.1 ) 0.95 Yb 0.05 O 3-δ (SCZY) were prepared by the sol-gel process. Their material requirements and environmental emissions were inventoried, and their energy requirements were determined, based on actual production data. This latter point makes the present LCA especially worthy of attention as a preliminary indication of future environmental impact. The analysis was performed according to the recommendations of ISO norms 14040 and obtained using the Gabi 6 software. The performance of the analyzed samples was also compared with each other. The LCA results for these proton conducting ceramics production processes indicated that the marine aquatic ecotoxicity potential (MAETP) made up the largest part, followed by fresh-water aquatic ecotoxicity potential (FAETP) and Human Toxicity Potential (HTP). The largest contribution was from energy consumption during annealing and calcinations steps.
Coppieters, Frauke; Todeschini, Anne Laure; Fujimaki, Takuro; Baert, Annelot; De Bruyne, Marieke; Van Cauwenbergh, Caroline; Verdin, Hannah; Bauwens, Miriam; Ongenaert, Maté; Kondo, Mineo; Meire, Françoise; Murakami, Akira; Veitia, Reiner A; Leroy, Bart P; De Baere, Elfride
2015-12-01
Leber congenital amaurosis (LCA) is a severe autosomal-recessive retinal dystrophy leading to congenital blindness. A recently identified LCA gene is NMNAT1, located in the LCA9 locus. Although most mutations in blindness genes are coding variations, there is accumulating evidence for hidden noncoding defects or structural variations (SVs). The starting point of this study was an LCA9-associated consanguineous family in which no coding mutations were found in the LCA9 region. Exploring the untranslated regions of NMNAT1 revealed a novel homozygous 5'UTR variant, c.-70A>T. Moreover, an adjacent 5'UTR variant, c.-69C>T, was identified in a second consanguineous family displaying a similar phenotype. Both 5'UTR variants resulted in decreased NMNAT1 mRNA abundance in patients' lymphocytes, and caused decreased luciferase activity in human retinal pigment epithelial RPE-1 cells. Second, we unraveled pseudohomozygosity of a coding NMNAT1 mutation in two unrelated LCA patients by the identification of two distinct heterozygous partial NMNAT1 deletions. Molecular characterization of the breakpoint junctions revealed a complex Alu-rich genomic architecture. Our study uncovered hidden genetic variation in NMNAT1-associated LCA and emphasized a shift from coding to noncoding regulatory mutations and repeat-mediated SVs in the molecular pathogenesis of heterogeneous recessive disorders such as hereditary blindness. © 2015 The Authors. **Human Mutation published by Wiley Periodicals, Inc.
Towards a general framework for including noise impacts in LCA.
Cucurachi, Stefano; Heijungs, Reinout; Ohlau, Katrin
Several damages have been associated with the exposure of human beings to noise. These include auditory effects, i.e., hearing impairment, but also non-auditory physiological ones such as hypertension and ischemic heart disease, or psychological ones such as annoyance, depression, sleep disturbance, limited performance of cognitive tasks or inadequate cognitive development. Noise can also interfere with intended activities, both in daytime and nighttime. ISO 14'040 also indicated the necessity of introducing noise, together with other less developed impact categories, in a complete LCA study, possibly changing the results of many LCA studies already available. The attempts available in the literature focused on the integration of transportation noise in LCA. Although being considered the most frequent source of intrusive impact, transportation noise is not the only type of noise that can have a malign impact on public health. Several other sources of noise such as industrial or occupational need to be taken into account to have a complete consideration of noise into LCA. Major life cycle inventories (LCI) typically do not contain data on noise emissions yet and characterisation factors are not yet clearly defined. The aim of the present paper is to briefly review what is already available in the field and propose a new framework for the consideration of human health impacts of any type of noise that could be of interest in the LCA practice, providing indications for the introduction of noise in LCI and analysing what data is already available and, in the form of a research agenda, what other resources would be needed to reach a complete coverage of the problem. The literature production related to the impacts of noise on human health has been analysed, with considerations of impacts caused by transportation noise as well as occupational and industrial noise. The analysis of the specialist medical literature allowed for a better understanding of how to deal with the epidemiological findings from an LCA perspective and identify areas still missing dose-response relations. A short review of the state-of-science in the field of noise and LCA is presented with an expansion to other contributions in the field subsequent to the comprehensive work by Althaus et al. (2009a; 2009b). Focusing on the analogy between toxicological analysis of pollutants and noise impact evaluation, an alternative approach is suggested, which is oriented to the consideration of any type of noise in LCA and not solely of transportation noise. A multi-step framework is presented as a method for the inclusion of noise impacts on human health in LCA. A theoretical structural framework for the inclusion of noise impacts in LCA is provided as a basis for future modelling expansions in the field. Rather than evaluating traffic/transportation noise, the method focuses on the consideration of the noise level and its impact on human health, regardless of the source producing the noise in an analogous manner as considered in the fields of toxicology and common noise evaluation practices combined. The resulting framework will constitute the basis for the development of a more detailed mathematical model for the inclusion of noise in LCA. The toxicological background and the experience of the analysis of the release of chemicals in LCA seem to provide sufficient ground for the inclusion of noise in LCA: taken into account the physical differences and the uniqueness of noise as an impact, the procedure applied to the release of chemicals during a product life cycle is key for a valuable inclusion of noise in the LCA logic. It is fundamental for the development of research in the field of LCA and noise to consider any type of noise. Further studies are needed to contribute to the inclusion of noise sources and noise impacts in LCA. In this paper, a structure is proposed that will be expanded and adapted in the future and which forms the basic framework for the successive modelling phase.
The Opportunities and Pitfalls of Applying Life Cycle Thinking to Nanoproducts and Nanomaterials
Life Cycle Assessment (LCA) is a well-established methodology for evaluating the environmental impact of products, materials, and processes. LCA experts worldwide agree that existing LCA tools are capable of supporting the development of decisions on the use of nanomaterials and ...
Life Cycle Comparison of Waste-to-Energy to Sanitary Landfill
Life cycle assessment (LCA) can be used to evaluate the environmental footprint of products, processes, and services. An LCA allows decision makers to compare products and processes through systematic evaluation of supply chains. Also known as a “cradle-to-grave” approach, LCA ev...
Sexual dysfunction in an Internet sample of U.S. men who have sex with men.
Hirshfield, Sabina; Chiasson, Mary Ann; Wagmiller, Robert L; Remien, Robert H; Humberstone, Mike; Scheinmann, Roberta; Grov, Christian
2010-09-01
Relatively little is known about sexual dysfunction (SD) in men who have sex with men (MSM). In order to better understand SD symptoms in MSM, we assessed self-reported SD symptoms, individually and by latent class analysis (LCA). In 2004-2005 an Internet sample of U.S. MSM was recruited from gay-oriented sexual networking, chat and news websites. The analytic sample comprised 7,001 men aged 18 or older who reported lifetime male sex partners and oral or anal sex with a male partner in their most recent encounter within the past year. Seven questions on SD symptoms that occurred during the past 12 months inquired about low sexual desire, erection problems, inability to achieve an orgasm, performance anxiety, premature ejaculation, pain during sex, and sex not being pleasurable. Self-reported symptoms of SD were high. Overall, 79% of men reported one or more SD symptoms in the past year, with low sexual desire, erection problems, and performance anxiety being the most prevalent. Four distinct underlying patterns of sexual functioning were identified by LCA: no/low SD, erection problems/performance anxiety, low desire/pleasure, and high SD/sexual pain. High SD/sexual pain was distinguished from the other patterns by club drug use and use of prescription and non-prescription erectile dysfunction medication before sex in the past year. Additionally, men associated with the high SD/sexual pain group were younger, single, more likely to have poor mental and physical health, and more likely to have been diagnosed with a sexually transmitted infection in the past year compared to men in the no/low SD group. LCA enabled us to identify underlying patterns of sexual functioning among this sample of MSM recruited online. Future research should investigate these distinct subgroups with SD symptoms in order to develop tailored treatments and counseling for SD. © 2009 International Society for Sexual Medicine.
The vertebral formula of the last common ancestor of African apes and humans.
McCollum, Melanie A; Rosenman, Burt A; Suwa, Gen; Meindl, Richard S; Lovejoy, C Owen
2010-03-15
The modal number of lumbar vertebrae in modern humans is five. It varies between three and four in extant African apes (mean=3.5). Because both chimpanzees (Pan troglodytes) and gorillas (Gorilla gorilla) possess the same distributions of thoracic, lumbar, and sacral vertebrae, it has been assumed from parsimony that the last common ancestor (LCA) of African apes and humans possessed a similarly short lower back. This "short-backed LCA" scenario has recently been viewed favorably in an analysis of the intra- and interspecific variation in axial formulas observed among African apes and humans (Pilbeam, 2004. J Exp Zool 302B:241-267). However, the number of bonobo (Pan paniscus) specimens in that study was small (N=17). Here we reconsider vertebral type and number in the LCA in light of an expanded P. paniscus sample as well as evidence provided by the human fossil record. The precaudal (pre-coccygeal) axial column of bonobos differs from those of chimpanzees and gorillas in displaying one additional vertebra as well as significantly different combinations of sacral, lumbar, and thoracic vertebrae. These findings, along with the six-segmented lumbar column of early Australopithecus and early Homo, suggest that the LCA possessed a long axial column and long lumbar spine and that reduction in the lumbar column occurred independently in humans and in each ape clade, and continued after separation of the two species of Pan as well. Such an explanation is strongly congruent with additional details of lumbar column reduction and lower back stabilization in African apes.
Aebi, Marcel; Linhart, Susanne; Thun-Hohenstein, Leonhard; Bessler, Cornelia; Steinhausen, Hans-Christoph; Plattner, Belinda
2015-07-01
The objective of the present study was to analyse patterns of emotional, physical and sexual maltreatment in detained male juvenile offenders using latent class analysis (LCA). The association of maltreatment related LCA profiles with psychopathology and criminal behaviors was also studied. LCA based on the items of the Child Trauma Questionnaire (CTQ) assessing childhood emotional, physical, and sexual abuse was performed in a sample of 260 male adolescent offenders (mean age = 16.5 years, SD = 1.29 years). Chi square tests and general linear models were performed to assess the associations of CTQ profiles with categorical interview-based psychiatric disorders, dimensional Youth Self-Report problem scales, and officially registered offenses. LCA suggested a three class solution: (1) a no/mild trauma (NM; 76 %) (2) emotional and physical trauma (EP; 18 %) and (3) emotional, physical, and sexual trauma (EPS; 8 %). The classes EP and EPS were related to a variety of psychiatric disorders and self-reported mental health problems. Furthermore, EPS showed higher presence of a subsequent re-incarceration compared to NM. A majority of sexually abused juveniles also experienced emotional and physical abuse reflecting gravely disturbed family systems. Multiple abuse in childhood was associated with a broad variety of disorders including externalizing disorders and repeated criminal offending. Such findings indicate that trauma assessment is also relevant in externalizing youth. A comprehensive treatment approach for detained boys with multiple abuse experiences is required targeting both mental health needs and the reduction of criminal behaviors.
FUNDAMENTALS OF LIFE CYCLE ASSESSMENT AND OFF-THE-SHELF SOFTWARE DEMONSTRATION
As the name implies, Life Cycle Assesssment (LCA) evaluates the entire life cycle of a product, process, activity, or service, not just simple economics at the time of delivery. This course on LCA covers the following issues:
Basic principles of LCA for use in producing, des...
Liao, Wenjie; van der Werf, Hayo M G; Salmon-Monviola, Jordy
2015-09-15
One of the major challenges in environmental life cycle assessment (LCA) of crop production is the nonlinearity between nitrogen (N) fertilizer inputs and on-site N emissions resulting from complex biogeochemical processes. A few studies have addressed this nonlinearity by combining process-based N simulation models with LCA, but none accounted for nitrate (NO3(-)) flows across fields. In this study, we present a new method, TNT2-LCA, that couples the topography-based simulation of nitrogen transfer and transformation (TNT2) model with LCA, and compare the new method with a current LCA method based on a French life cycle inventory database. Application of the two methods to a case study of crop production in a catchment in France showed that, compared to the current method, TNT2-LCA allows delineation of more appropriate temporal limits when developing data for on-site N emissions associated with specific crops in this catchment. It also improves estimates of NO3(-) emissions by better consideration of agricultural practices, soil-climatic conditions, and spatial interactions of NO3(-) flows across fields, and by providing predicted crop yield. The new method presented in this study provides improved LCA of crop production at the catchment scale.
Conceptual Framework To Extend Life Cycle Assessment ...
Life Cycle Assessment (LCA) is a decision-making tool that accounts for multiple impacts across the life cycle of a product or service. This paper presents a conceptual framework to integrate human health impact assessment with risk screening approaches to extend LCA to include near-field chemical sources (e.g., those originating from consumer products and building materials) that have traditionally been excluded from LCA. A new generation of rapid human exposure modeling and high-throughput toxicity testing is transforming chemical risk prioritization and provides an opportunity for integration of screening-level risk assessment (RA) with LCA. The combined LCA and RA approach considers environmental impacts of products alongside risks to human health, which is consistent with regulatory frameworks addressing RA within a sustainability mindset. A case study is presented to juxtapose LCA and risk screening approaches for a chemical used in a consumer product. The case study demonstrates how these new risk screening tools can be used to inform toxicity impact estimates in LCA and highlights needs for future research. The framework provides a basis for developing tools and methods to support decision making on the use of chemicals in products. This paper presents a conceptual framework for including near-field exposures into Life Cycle Assessment using advanced human exposure modeling and high-throughput tools
Prospective time-resolved LCA of fully electric supercap vehicles in Germany.
Zimmermann, Benedikt M; Dura, Hanna; Baumann, Manuel J; Weil, Marcel R
2015-07-01
The ongoing transition of the German electricity supply toward a higher share of renewable and sustainable energy sources, called Energiewende in German, has led to dynamic changes in the environmental impact of electricity over the last few years. Prominent scenario studies predict that comparable dynamics will continue in the coming decades, which will further improve the environmental performance of Germany's electricity supply. Life cycle assessment (LCA) is the methodology commonly used to evaluate environmental performance. Previous LCA studies on electric vehicles have shown that the electricity supply for the vehicles' operation is responsible for the major part of their environmental impact. The core question of this study is how the prospective dynamic development of the German electricity mix will affect the impact of electric vehicles operated in Germany and how LCA can be adapted to analyze this impact in a more robust manner. The previously suggested approach of time-resolved LCA, which is located between static and dynamic LCA, is used in this study and compared with several static approaches. Furthermore, the uncertainty issue associated with scenario studies is addressed in general and in relation to time-resolved LCA. Two scenario studies relevant to policy making have been selected, but a moderate number of modifications have been necessary to adapt the data to the requirements of a life cycle inventory. A potential, fully electric vehicle powered by a supercapacitor energy storage system is used as a generic example. The results show that substantial improvements in the environmental repercussions of the electricity supply and, consequentially, of electric vehicles will be achieved between 2020 and 2031 on the basis of the energy mixes predicted in both studies. This study concludes that although scenarios might not be able to predict the future, they should nonetheless be used as data sources in prospective LCA studies, because in many cases historic data appears to be unsuitable for providing realistic information on the future. The time-resolved LCA approach improves the assessment's robustness substantially, especially when nonlinear developments are foreseen in the future scenarios. This allows for a reduction of bias in LCA-based decision making. However, a deeper integration of time-resolved data in the life cycle inventory and the implementation of a more suitable software framework are desirable. The study describes how life cycle assessment's (LCA) robustness can be improved by respecting prospective fluctuations, like the transition of the German electricity mix, in the modeling of the life cycle inventory. It presents a feasible and rather simple process to add time-resolved data to LCA. The study selects 2 different future scenarios from important German studies and processes their data systematically to make them compatible with the requirements of a life cycle inventory. The use of external scenarios as basis for future-oriented LCA is reflected critically. A case study on electric mobility is presented and used to compare historic, prospective static, and prospective time-resolved electricity mix modeling approaches. The case study emphasizes the benefits of time-resolved LCA in direct comparison with the currently used approaches. © 2015 SETAC.
NASA Astrophysics Data System (ADS)
Gopal, Anand Raja
Lifecycle Assessment (LCA) is undergoing a period of rapid change as it strives to become more policy-relevant. Attributional LCA, the traditional LCA category, is beginning to be seen as particularly ill-equipped to assess the consequences of a policy. This has given birth to a new category of LCA known as Consequential LCA that is designed for use in LCA-based policies but is still largely unknown, even to LCA experts, and suffers from a lack of well developed methods. As a result, many LCA-based policies, like the California Low Carbon Fuel Standard (LCFS), use poor LCA methods that are both scientifically suspect and unable to model many biofuels, especially ones manufactured from byproduct feedstocks. Biofuels made from byproduct feedstocks, primarily molasses ethanol from Asia and the Caribbean, can contribute significantly to LCFS' carbon intensity targets in the near-term at low costs, a desperate need for the policy ever since US corn ethanol was rated as having a worse global warming impact than gasoline. In this dissertation, I develop the first fully consequential lifecycle assessment of a byproduct-based biofuel using a partial equilibrium foundation. I find that the lifecycle carbon content of Indian molasses ethanol is just 5 gCO2/MJ using this method, making it one of the cleanest first generation biofuels in the LCFS. I also show that Indian molasses ethanol remains one of the cleanest first-generation biofuels even when using the flawed methodology ratified for the LCFS, with a lifecycle carbon content of 24 gCO2/MJ. My fully consequential LCA model also shows that India's Ethanol Blending program, which currently subsidizes blending of molasses ethanol and gasoline for domestic consumption, can meet its objective of supporting domestic agriculture more cost-effectively by helping producers export their molasses ethanol to fuel markets that value carbon. However, this objective will be achieved at a significant cost to the poor who will face a 39% increase in the price of sorghum because of the policy.
Influence of calcium and phosphorus feeding on markers of bone metabolism in transition cows.
Moreira, V R; Zeringue, L K; Williams, C C; Leonardi, C; McCormick, M E
2009-10-01
A study was carried out to verify the effect of Ca and P levels on production, digestibility, and serum bone metabolism biomarkers in dairy cows. Fifty-two nonlactating multiparous cows (>or=3 lactations) were confined in a free-stall barn approximately 20 d before calving. A standard close-up diet was fed to cows once daily until d 2 postpartum. Cows were randomly assigned to 1 of 4 dietary treatments arranged in a 2 x 2 factorial approach averaging 0.64% Ca for high Ca (HCa), 0.46% Ca for low Ca (LCa), 0.47% P for high P (HP), and 0.38% P for low P (LP) on a dry matter basis. Experimental diets were fed twice daily from 3 d in milk (DIM) until 31 DIM. Intake and milk yield were recorded daily. Milk samples were collected on d 28, 29, and 30 postpartum for components analyses. Blood samples were drawn 10 d before expected calving, at calving, and at 15 and 30 DIM for serum analyses of osteocalcin, a biomarker of bone accretion, and pyridinoline, a biomarker of bone resorption. Total fecal collection was conducted when cows in a block averaged 20 DIM. Intake and production traits were not significantly affected by any of the dietary treatments. Cows averaged nearly 21 kg/d dry matter intake and 44 kg/d milk yield from 6 to 31 DIM. There were no significant differences across treatments in body weight or body condition score loss. Phosphorus intake, P fecal output, P digestibility, and P apparent absorption were affected by dietary P content. Calcium intake was higher with HCa, but Ca fecal output, digestibility, and apparent absorption showed an interaction between dietary Ca and dietary P. Calcium fecal output was 100.6 g/d for cows fed HCaHP, intermediate for cows on the HCaLP diet (89 g/d), and similar among cows fed the 2 LCa diets (70 g/d with LCaHP and 75 with LCaLP). There was no significant effect of Ca or P on osteocalcin measurements. Pyridinoline concentrations were affected by dietary Ca levels and tended to have a significant dietary Ca x dietary P interaction. Phosphorus apparent digestibility occurred independently of dietary Ca levels. Results of this study suggest that more bone was mobilized in cows fed LCa diets, but excess dietary P caused greater and prolonged bone mobilization regardless of dietary Ca content.
Differential Roles for the Thyroarytenoid and Lateral Cricoarytenoid Muscles in Phonation
Chhetri, Dinesh K.; Neubauer, Juergen
2015-01-01
Objective Laryngeal adductor muscle dysfunction is common cause of voice disorders. Reconstitution of adductor muscle function is often the target of therapy, but the effects of these muscles on voice production remain to be fully understood. This study investigated the differential roles of thyroarytenoid (TA) and lateral cricoarytenoid (LCA) muscles on voice production. Study Design Basic science study using an in vivo canine model of phonation. Methods The TA and LCA muscle nerve branches were stimulated to obtain 7 graded levels of muscle activation, from threshold to maximal contraction. The effects of LCA activation alone, TA activation alone, and combined TA and LCA activation on phonation onset parameters were investigated. Phonatory posture, phonation onset type, fundamental frequency (F0), phonation onset pressure, and airflow were evaluated. Results LCA activation closed the posterior glottis but mid-membranous gap remained. TA activation closed the membranous glottis but posterior gap remained. Complete glottal closure was obtained only with combined TA and LCA activation. Phonation onset with LCAs alone was characterized by multiple modes (soft, aperiodic, periodic), while with TAs alone was abrupt and periodic but had significant baseline noise. Combined muscle activation led to elimination of baseline noise with stable abrupt periodic onset of phonation. Combined muscle activation was also necessary for F0 variation. LCA assisted the TA in increasing subglottal pressure while concurrently reducing phonation onset airflow. Conclusion TA is necessary for F0 variation, stable onset phonation, and increased subglottal pressure but needs LCA for optimal effectiveness and to reduce airflow requirements with increased activation. PMID:26198167
Lin, Wei-Lun; Lo, Li-Wei; Chen, Hau-Ruey; Lai, Chun-Ting; Yamada, Shinya; Liu, Shin-Huei; Chou, Yu-Hui; Chen, Shih-Ann; Fu, Yun-Ching; Kuo, Terry B J
2016-12-15
Autonomic imbalance with increased sympathetic and decreased parasympathetic activities is observed in patients after myocardial infarction (MI). We aimed to investigate sleep-related changed in autonomic regulation in left coronary artery (LCA) ligation rats. Wireless transmission of polysomnographic recording was performed in sham and LCA ligation male rats during normal daytime sleep with and without atenolol treatment. Spectral analyses of the electroencephalogram (EEG) and electromyogram (EMG) were evaluated to define active waking (AW), quiet and paradoxical sleeps (QS, PS). Cardiac autonomic activities were measured by analyzing the power spectrum of heart rate variability (HRV). EEG, EMG and HRV were recorded over 6h for consecutive 3days in all groups. In LCA ligation group, there were higher LF and LF/HF ratio on QS phase, but not AW and PS phases, compared to atenolol treated sham and LCA ligation groups, respectively. The HF component was not significantly changed on all groups in both sleep and awake phases. Sleep interruption was more frequent in LCA ligation rats compared to sham, and it was not found in LCA ligation with atenolol treatment group. Increased AW, PS and decreased QS time were noted in LCA ligation group, compared to sham and it was restored to baseline in LCA ligation with atenolol treatment group. Our results demonstrate significant sleep fragmentations with sympathetic hyperactivity during QS stages after MI, and atenolol could restore the autonomic dysfunction and sleep disturbance. The finding explains the cause of sleep-related fetal arrhythmia and sudden cardiac death after MI. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Although important data and methodological challenges facing LCA and emerging materials exist, this LCA captures material and process changes that are important drivers of environmental impacts. LCA methods need to be amended to reflect properties of emerging materials that deter...
Temporal Considerations of Carbon Sequestration in LCA
James Salazar; Richard Bergman
2013-01-01
Accounting for carbon sequestration in LCA illustrates the limitations of a single global warming characterization factor. Typical cradle-to-grave LCA models all emissions from end-of-life processes and then characterizes these flows by IPCC GWP (100-yr) factors. A novel method estimates climate change impact by characterizing annual emissions with the IPCC GHG forcing...
Configurations of Common Childhood Psychosocial Risk Factors
ERIC Educational Resources Information Center
Copeland, William; Shanahan, Lilly; Costello, E. Jane; Angold, Adrian
2009-01-01
Background: Co-occurrence of psychosocial risk factors is commonplace, but little is known about psychiatrically-predictive configurations of psychosocial risk factors. Methods: Latent class analysis (LCA) was applied to 17 putative psychosocial risk factors in a representative population sample of 920 children ages 9 to 17. The resultant class…
Lithocholic bile acid inhibits lipogenesis and induces apoptosis in breast cancer cells.
Luu, Trang H; Bard, Jean-Marie; Carbonnelle, Delphine; Chaillou, Chloé; Huvelin, Jean-Michel; Bobin-Dubigeon, Christine; Nazih, Hassan
2018-02-01
It has amply been documented that mammary tumor cells may exhibit an increased lipogenesis. Biliary acids are currently recognized as signaling molecules in the intestine, in addition to their classical roles in the digestion and absorption of lipids. The aim of our study was to evaluate the impact of lithocholic acid (LCA) on the lipogenesis of breast cancer cells. The putative cytotoxic effects of LCA on these cells were also examined. The effects of LCA on breast cancer-derived MCF-7 and MDA-MB-231 cells were studied using MTT viability assays, Annexin-FITC and Akt phosphorylation assays to evaluate anti-proliferative and pro-apoptotic properties, qRT-PCR and Western blotting assays to assess the expression of the bile acid receptor TGR5 and the estrogen receptor ERα, and genes and proteins involved in apoptosis (Bax, Bcl-2, p53) and lipogenesis (SREBP-1c, FASN, ACACA). Intracellular lipid droplets were visualized using Oil Red O staining. We found that LCA induces TGR5 expression and exhibits anti-proliferative and pro-apoptotic effects in MCF-7 and MDA-MB-231 cells. Also, an increase in pro-apoptotic p53 protein expression and a decrease in anti-apoptotic Bcl-2 protein expression were observed after LCA treatment of MCF-7 cells. In addition, we found that LCA reduced Akt phosphorylation in MCF-7 cells, but not in MDA-MB-231 cells. We also noted that LCA reduced the expression of SREBP-1c, FASN and ACACA in both breast cancer-derived cell lines and that cells treated with LCA contained low numbers of lipid droplets compared to untreated control cells. Finally, a decrease in ERα expression was observed in MCF-7 cells treated with LCA. Our data suggest a potential therapeutic role of lithocholic acid in breast cancer cells through a reversion of lipid metabolism deregulation.
Stochastic Stability of Nonlinear Sampled Data Systems with a Jump Linear Controller
NASA Technical Reports Server (NTRS)
Gonzalez, Oscar R.; Herencia-Zapana, Heber; Gray, W. Steven
2004-01-01
This paper analyzes the stability of a sampled- data system consisting of a deterministic, nonlinear, time- invariant, continuous-time plant and a stochastic, discrete- time, jump linear controller. The jump linear controller mod- els, for example, computer systems and communication net- works that are subject to stochastic upsets or disruptions. This sampled-data model has been used in the analysis and design of fault-tolerant systems and computer-control systems with random communication delays without taking into account the inter-sample response. To analyze stability, appropriate topologies are introduced for the signal spaces of the sampled- data system. With these topologies, the ideal sampling and zero-order-hold operators are shown to be measurable maps. This paper shows that the known equivalence between the stability of a deterministic, linear sampled-data system and its associated discrete-time representation as well as between a nonlinear sampled-data system and a linearized representation holds even in a stochastic framework.
De Luca, Anna Irene; Iofrida, Nathalie; Strano, Alfio; Falcone, Giacomo; Gulisano, Giovanni
2015-07-01
Recently, Social Life Cycle Assessment (S-LCA) has been developed under the methodological framework of Life Cycle Thinking (LCT) to evaluate the social impacts that emerge during the overall life cycle of a product or service. There is not yet a standardized methodology for S-LCA as there is for environmental LCA (eLCA), due to the nature of social impacts that do not depend only on the processes themselves, but also on the behavior and context of actors (manufactures, consumers, local community members, etc.). One of the most critical steps in the application of S-LCA concerns the choice of criteria for selecting affected actors, impact categories, subcategories, and the taxonomic relation among them. Moreover, the importance (in terms of weight) of these impacts may be felt differently by affected actors, confirming the importance of the context within which impacts arise. In this sense, the integration of participatory tools can be useful in making the S-LCA more locally relevant. The aim of the present study is twofold. First, we will outline a methodology that combines S-LCA with two research tools. The first is the focus group, adopted from qualitative research. The second is the Analytic Hierarchy Process (AHP), adopted from operational research, which belongs to the framework of Multicriteria Decision Analysis (MCDA). These have been used to make the S-LCA more locally relevant and to legitimate the criteria used. Second, we will test this methodology by applying it to a specific field, i.e., 3 production areas and 3 different crop systems of citrus growing in the Calabria region in Southern Italy. Citrus growing is one of the most important agricultural sectors at regional level, and it is also well known for issues of social concern, particularly in relation to immigrant workers. The results show a number of differences between cases and could offer useful insights to both local decision makers, such as agricultural entrepreneurs, and to those public decision makers that design and implement territorial planning strategies. Results have allowed the authors to rank the social performance of each case and to reflect on the most critical steps in conducting an S-LCA. The integration of qualitative techniques and a multicriteria in sLCA allows catching local specificities by involving local experts and stakeholders Results highlighted that impact categories mostly contributed to performance differences Public deciders can be supported in deciding which farming practices should be encouraged, which social domains must be paid more attention, and where social problems mostly occur The methodological application allowed the authors also to foresee the feasibility of the integration of LCA and LCC results as inputs in sLCA to conduct a Life Cycle Sustainability Assessment (LCSA). © 2015 SETAC.
Keane, Carol A; Magee, Christopher A; Kelly, Peter J
2016-11-01
Traumatic childhood experiences predict many adverse outcomes in adulthood including Complex-PTSD. Understanding complex trauma within socially disadvantaged populations has important implications for policy development and intervention implementation. This paper examined the nature of complex trauma experienced by disadvantaged individuals using a latent class analysis (LCA) approach. Data were collected through the large-scale Journeys Home Study (N=1682), utilising a representative sample of individuals experiencing low housing stability. Data on adverse childhood experiences, adulthood interpersonal trauma and relevant covariates were collected through interviews at baseline (Wave 1). Latent class analysis (LCA) was conducted to identify distinct classes of childhood trauma history, which included physical assault, neglect, and sexual abuse. Multinomial logistic regression investigated childhood relevant factors associated with class membership such as biological relationship of primary carer at age 14 years and number of times in foster care. Of the total sample (N=1682), 99% reported traumatic adverse childhood experiences. The most common included witnessing of violence, threat/experience of physical abuse, and sexual assault. LCA identified six distinct childhood trauma history classes including high violence and multiple traumas. Significant covariate differences between classes included: gender, biological relationship of primary carer at age 14 years, and time in foster care. Identification of six distinct childhood trauma history profiles suggests there might be unique treatment implications for individuals living in extreme social disadvantage. Further research is required to examine the relationship between these classes of experience, consequent impact on adulthood engagement, and future transitions though homelessness. Copyright © 2016 Elsevier Ltd. All rights reserved.
Photo-switching of a non-ionic azobenzene amphiphile in Langmuir and Langmuir-Blodgett films.
Piosik, Emilia; Kotkowiak, Michał; Korbecka, Izabela; Galewski, Zbigniew; Martyński, Tomasz
2017-08-30
The concept of programmable and reconfigurable soft matter has emerged in science in the last few decades and can be realized by photoisomerization of azobenzene derivatives. This possibility results in great application potential of these compounds in optical storage devices, molecular junctions of electronic devices, command layers of liquid crystal displays or holographic gratings. In this paper, we present the results of a study on the organization and isomerization of the non-ionic and amphiphilic methyl 4-[(E)-2-[4-(nonyloxy)phenyl]diazen-1-yl]benzoate (LCA) in a 2D layer architecture of Langmuir and Langmuir-Blodgett (LB) films supported by spectroscopic studies on LCA chloroform solutions. Our investigation has shown a significantly different molecular organization of LCA depending on the ratio of trans and cis isomers in the monolayers. Taking advantage of a relatively low packing density and aggregation strength in the cis-LCA monolayer, we demonstrated the reversible isomerization in the LB film initially formed of LCA molecules in the cis form, while in the trans-LCA monolayer this effect was not observed. Our approach allows the formation of a switchable monolayer made of the amphiphilic LCA showing liquid crystalline properties without introducing an ionic group into the molecule structure, mixing with another compound or changing the subphase pH to provide free space for the molecules' isomerization.
Xu, Kai; Gao, Kunshan
2012-07-01
Intracellular calcification of coccolithophores generates CO₂ and consumes additional energy for acquisition of calcium and bicarbonate ions; therefore, it may correlate with photoprotective processes by influencing the energetics. To address this hypothesis, a calcifying Emiliania huxleyi strain (CS-369) was grown semi-continuously at reduced (0.1 mM, LCa) and ambient Ca²⁺ concentrations (10 mM, HCa) for 150 d (>200 generations). The HCa-grown cells had higher photosynthetic and calcification rates and higher contents of Chl a and carotenoids compared with the naked (bearing no coccoliths) LCa-grown cells. When exposed to stressfull levels of photosynthetically active radiation (PAR), LCa-grown cells displayed lower photochemical yield and less efficient non-photochemical quenching (NPQ). When the LCa- or HCa-grown cells were inversely shifted to their counterpart medium, LCa to HCa transfer increased photosynthetic carbon fixation (P), calcification rate (C), the C/P ratio, NPQ and pigment contents, whereas those shifted from HCa to LCa exhibited the opposite effects. Increased NPQ, carotenoids and quantum yield were clearly linked with increased or sustained calcification in E. huxleyi. The calcification must have played a role in dissipating excessive energy or as an additional drainage of electrons absorbed by the photosynthetic antennae. This phenomenon was further supported by testing two non-calcifying strains, which showed insignificant changes in photosynthetic carbon fixation and NPQ when transferred to LCa conditions.
Machine learning from computer simulations with applications in rail vehicle dynamics
NASA Astrophysics Data System (ADS)
Taheri, Mehdi; Ahmadian, Mehdi
2016-05-01
The application of stochastic modelling for learning the behaviour of a multibody dynamics (MBD) models is investigated. Post-processing data from a simulation run are used to train the stochastic model that estimates the relationship between model inputs (suspension relative displacement and velocity) and the output (sum of suspension forces). The stochastic model can be used to reduce the computational burden of the MBD model by replacing a computationally expensive subsystem in the model (suspension subsystem). With minor changes, the stochastic modelling technique is able to learn the behaviour of a physical system and integrate its behaviour within MBD models. The technique is highly advantageous for MBD models where real-time simulations are necessary, or with models that have a large number of repeated substructures, e.g. modelling a train with a large number of railcars. The fact that the training data are acquired prior to the development of the stochastic model discards the conventional sampling plan strategies like Latin Hypercube sampling plans where simulations are performed using the inputs dictated by the sampling plan. Since the sampling plan greatly influences the overall accuracy and efficiency of the stochastic predictions, a sampling plan suitable for the process is developed where the most space-filling subset of the acquired data with ? number of sample points that best describes the dynamic behaviour of the system under study is selected as the training data.
The creation, management, and use of data quality information for life cycle assessment.
Edelen, Ashley; Ingwersen, Wesley W
2018-04-01
Despite growing access to data, questions of "best fit" data and the appropriate use of results in supporting decision making still plague the life cycle assessment (LCA) community. This discussion paper addresses revisions to assessing data quality captured in a new US Environmental Protection Agency guidance document as well as additional recommendations on data quality creation, management, and use in LCA databases and studies. Existing data quality systems and approaches in LCA were reviewed and tested. The evaluations resulted in a revision to a commonly used pedigree matrix, for which flow and process level data quality indicators are described, more clarity for scoring criteria, and further guidance on interpretation are given. Increased training for practitioners on data quality application and its limits are recommended. A multi-faceted approach to data quality assessment utilizing the pedigree method alongside uncertainty analysis in result interpretation is recommended. A method of data quality score aggregation is proposed and recommendations for usage of data quality scores in existing data are made to enable improved use of data quality scores in LCA results interpretation. Roles for data generators, data repositories, and data users are described in LCA data quality management. Guidance is provided on using data with data quality scores from other systems alongside data with scores from the new system. The new pedigree matrix and recommended data quality aggregation procedure can now be implemented in openLCA software. Additional ways in which data quality assessment might be improved and expanded are described. Interoperability efforts in LCA data should focus on descriptors to enable user scoring of data quality rather than translation of existing scores. Developing and using data quality indicators for additional dimensions of LCA data, and automation of data quality scoring through metadata extraction and comparison to goal and scope are needed.
Khalagi, Kazem; Mansournia, Mohammad Ali; Rahimi-Movaghar, Afarin; Nourijelyani, Keramat; Amin-Esmaeili, Masoumeh; Hajebi, Ahmad; Sharif, Vandad; Radgoodarzi, Reza; Hefazi, Mitra; Motevalian, Abbas
2016-01-01
Latent class analysis (LCA) is a method of assessing and correcting measurement error in surveys. The local independence assumption in LCA assumes that indicators are independent from each other condition on the latent variable. Violation of this assumption leads to unreliable results. We explored this issue by using LCA to estimate the prevalence of illicit drug use in the Iranian Mental Health Survey. The following three indicators were included in the LCA models: five or more instances of using any illicit drug in the past 12 months (indicator A), any use of any illicit drug in the past 12 months (indicator B), and the self-perceived need of treatment services or having received treatment for a substance use disorder in the past 12 months (indicator C). Gender was also used in all LCA models as a grouping variable. One LCA model using indicators A and B, as well as 10 different LCA models using indicators A, B, and C, were fitted to the data. The three models that had the best fit to the data included the following correlations between indicators: (AC and AB), (AC), and (AC, BC, and AB). The estimated prevalence of illicit drug use based on these three models was 28.9%, 6.2% and 42.2%, respectively. None of these models completely controlled for violation of the local independence assumption. In order to perform unbiased estimations using the LCA approach, the factors violating the local independence assumption (behaviorally correlated error, bivocality, and latent heterogeneity) should be completely taken into account in all models using well-known methods.
NASA Astrophysics Data System (ADS)
Pearson, Emma J.; Juggins, Steve; Farrimond, Paul
2008-08-01
We investigated relationships between sedimentary solvent-extractable long-chain alkenone (LCA) concentration and composition and environmental factors in a suite of endorheic lakes from inland Spain. LCAs were found in 14 of the 54 lakes examined, with concentrations comparable with those from previously published lacustrine settings. The composition of LCAs in our sites, however, contrast from the majority of those previously reported from lake environments; in our study the tri-unsaturated component is the most abundant component at most sites where LCAs are detected, and C 38:3 is the most abundant LCA in the majority of sites. LCA occurrence appears to be restricted to brackish-hypersaline sites and C 37 LCAs are absent above a salinity of ˜40 g L -1 suggesting a salinity control on LCA-producing organisms in these sites. Low concentrations of C 37 LCA components means U37k and U37k temperature indices are generally not applicable. Instead we find good relationships between C 38 components and (in particular mean autumn) temperature and the strongest LCA-temperature relationships are found when using a combination of all C 37 and C 38 compounds. We propose a new alkenone temperature index for lakes with elevated salinity and where the C 38 components dominate the LCA distributions. This is expressed as U3738k=0.0464×MAutAT-0.867 ( r2 = 0.80, n = 13). In this paper, we provide the first account of sedimentary LCA distributions from lakes in inland Spain, extending the range of environments within which these compounds have been found and highlighting their significance as indicators of both salinity and temperature in saline, endorheic lake environments. This has important implications for extending the potential role of LCAs as palaeoclimatic indicators in lacustrine environments.
Diagnostic application of clinical exome sequencing in Leber congenital amaurosis.
Han, Jinu; Rim, John Hoon; Hwang, In Sik; Kim, Jieun; Shin, Saeam; Lee, Seung-Tae; Choi, Jong Rak
2017-01-01
Leber congenital amaurosis (LCA) is a hereditary retinal dystrophy with wide genetic heterogeneity. Next-generation sequencing (NGS) targeting multiple genes can be a good option for the diagnosis of LCA, and we tested a clinical exome panel in patients with LCA. A total of nine unrelated Korean patients with LCA were sequenced using the Illumina TruSight One panel, which targets 4,813 clinically associated genes, followed by confirmation using Sanger sequencing. Patients' clinical information and familial study results were obtained and used for comprehensive interpretation. In all nine patients, we identified pathogenic variations in LCA-associated genes: NMNAT1 (n=3), GUCY2D (n=2), RPGRIP1 (n=2), CRX (n=1), and CEP290 or SPATA7 . Six patients had one or two mutations in accordance with inheritance patterns, all consistent with clinical phenotypes. Two patients had only one pathogenic mutation in recessive genes ( NMNAT1 and RPGRIP1 ), and the clinical features were specific to disorders associated with those genes. Six patients were solved for genetic causes, and it remains unclear for three patients with the clinical exome panel. With subsequent targeted panel sequencing with 113 genes associated with infantile nystagmus syndrome, a likely pathogenic allele in CEP290 was detected in one patient. Interestingly, one pathogenic variant (p.Arg237Cys) in NMNAT1 was present in three patients, and it had a high allele frequency (0.24%) in the general Korean population, suggesting that NMNAT1 could be a major gene responsible for LCA in Koreans. We confirmed that a commercial clinical exome panel can be effectively used in the diagnosis of LCA. Careful interpretation and clinical correlation could promote the successful implementation of clinical exome panels in routine diagnoses of retinal dystrophies, including LCA.
Bovea, M D; Powell, J C
2016-04-01
This paper provides a review of the literature that applies the life cycle assessment (LCA) methodology to the assessment of the environmental performance of the life cycle of construction and demolition waste (CDW) management systems. This article is focused on generating a general mapping of the literature and on identifying the best practices in compliance with LCA framework and proposing directions for future LCA studies in this field. The temporal evolution of the research in this field and the aim of the studies have grown in parallel with the legal framework related to waste and energy efficiency of buildings. Most studies have been published in Europe, followed by USA. Asia and Australia, being at an incipient application stage to the rest of the world. Topics related to "LCA of buildings, including their EoL" and "LCA of general CDW management strategies" are the most frequently analysed, followed by "LCA of EoL of construction elements" and "LCA of natural material vs recycled material". Regarding the strategies, recycling off-site and incineration, both combined with landfill for the rejected fractions, are the most commonly applied. Re-use or recycling on-site is the strategy least applied. The key aspect when LCA is applied to evaluate CDW management systems is the need to normalise which processes to include in the system boundary and the functional unit, the use of inventory data adapted to the context of the case study and the definition of a common set of appropriate impact assessment categories. Also, it is important to obtain results disaggregated by unit processes. This will allow the comparison between case studies. Copyright © 2016 Elsevier Ltd. All rights reserved.
Assessing operating characteristics of CAD algorithms in the absence of a gold standard
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roy Choudhury, Kingshuk; Paik, David S.; Yi, Chin A.
2010-04-15
Purpose: The authors examine potential bias when using a reference reader panel as ''gold standard'' for estimating operating characteristics of CAD algorithms for detecting lesions. As an alternative, the authors propose latent class analysis (LCA), which does not require an external gold standard to evaluate diagnostic accuracy. Methods: A binomial model for multiple reader detections using different diagnostic protocols was constructed, assuming conditional independence of readings given true lesion status. Operating characteristics of all protocols were estimated by maximum likelihood LCA. Reader panel and LCA based estimates were compared using data simulated from the binomial model for a range ofmore » operating characteristics. LCA was applied to 36 thin section thoracic computed tomography data sets from the Lung Image Database Consortium (LIDC): Free search markings of four radiologists were compared to markings from four different CAD assisted radiologists. For real data, bootstrap-based resampling methods, which accommodate dependence in reader detections, are proposed to test of hypotheses of differences between detection protocols. Results: In simulation studies, reader panel based sensitivity estimates had an average relative bias (ARB) of -23% to -27%, significantly higher (p-value <0.0001) than LCA (ARB -2% to -6%). Specificity was well estimated by both reader panel (ARB -0.6% to -0.5%) and LCA (ARB 1.4%-0.5%). Among 1145 lesion candidates LIDC considered, LCA estimated sensitivity of reference readers (55%) was significantly lower (p-value 0.006) than CAD assisted readers' (68%). Average false positives per patient for reference readers (0.95) was not significantly lower (p-value 0.28) than CAD assisted readers' (1.27). Conclusions: Whereas a gold standard based on a consensus of readers may substantially bias sensitivity estimates, LCA may be a significantly more accurate and consistent means for evaluating diagnostic accuracy.« less
Hedergott, A; Volk, A E; Herkenrath, P; Thiele, H; Fricke, J; Altmüller, J; Nürnberg, P; Kubisch, C; Neugebauer, A
2015-12-01
Leber congenital amaurosis (LCA) is a severe retinal dystrophy, typically manifesting in the first year of life. Mutations in more than 18 genes have been reported to date. In recent studies, biallelic mutations in NMNAT1 encoding nicotinamide mononucleotide adenylyltransferase 1 have been found to cause LCA. To broaden the knowledge regarding the phenotype of NMNAT1-associated LCA. Clinical ophthalmologic examinations were performed in two sisters with LCA. Whole exome sequencing was performed in one of the affected girls, with subsequent segregation analysis in the affected sister and unaffected parents. The literature was reviewed for reports of NMNAT1-associated LCA. Exome sequencing revealed the known NMNAT1 mutation c.25G>A (p.Val9Met) in a homozygous state. Segregation analysis showed the same homozygous mutation in the affected younger sister. Both parents were found to be heterozygous carriers of the mutation. The two girls both presented with severe visual impairment, nystagmus, central atrophy of the pigment epithelium, and pigment clumping in the periphery before the age of 6 months. Retinal vessels were attenuated. Both children were hyperopic. In the older sister, differential diagnosis included an inflammatory origin, but electrophysiology in her as well as her sister confirmed a diagnosis of LCA. Pallor of the optic nerve head was not present at birth but developed progressively. We confirmed a diagnosis of NMNAT1-associated LCA in two siblings through identification of the mutation (c.25G>A [p. Val9Met]) in a homozygous state. In infants with non-detectable electroretinogram (ERG), along with severe congenital visual dysfunction or blindness and central pigment epithelium atrophy with pigment clumping resembling scarring due to chorioretinitis, LCA due to NMNAT1 mutations should be considered.
Zhai, Yi; Wang, Yan; Wang, Zhaoqi; Liu, Yongji; Zhang, Lin; He, Yuanqing; Chang, Shengjiang
2014-01-01
An achromatic element eliminating only longitudinal chromatic aberration (LCA) while maintaining transverse chromatic aberration (TCA) is established for the eye model, which involves the angle formed by the visual and optical axis. To investigate the impacts of higher-order aberrations on vision, the actual data of higher-order aberrations of human eyes with three typical levels are introduced into the eye model along visual axis. Moreover, three kinds of individual eye models are established to investigate the impacts of higher-order aberrations, chromatic aberration (LCA+TCA), LCA and TCA on vision under the photopic condition, respectively. Results show that for most human eyes, the impact of chromatic aberration on vision is much stronger than that of higher-order aberrations, and the impact of LCA in chromatic aberration dominates. The impact of TCA is approximately equal to that of normal level higher-order aberrations and it can be ignored when LCA exists.
NASA Astrophysics Data System (ADS)
Kimura, Yukio; Sadamichi, Yucho; Maruyama, Naoki; Kato, Seizo
These days the environmental impact due to vending machines'(VM) diffusion has greatly been discussed. This paper describes the numerical evaluation of the environmental impact by using the LCA (Life Cycle Assessment) scheme and then proposes eco-improvements' strategy toward environmentally conscious products(ECP). A new objective and universal consolidated method for the LCA-evaluation, so-called LCA-NETS(Numerical Eco-load Standardization ) developed by the authors is applied to the present issue. As a result, the environmental loads at the 5years' operation and the material procurement stages are found to dominate others over the life cycle. Further eco-improvement is realized by following the order of the LCA-NETS magnitude; namely, energy saving, materials reducing, parts' re-using, and replacing with low environmental load material. Above all, parts' re-using is specially recommendable for significant reduction of the environmental loads toward ECP.
Yang, Shiying; Yang, Siyu; Kraslawski, Andrzej; Qian, Yu
2013-12-17
Ecologically based life cycle assessment (Eco-LCA) is an appealing approach for the evaluation of resources utilization and environmental impacts of the process industries from an ecological scale. However, the aggregated metrics of Eco-LCA suffer from some drawbacks: the environmental impact metric has limited applicability; the resource utilization metric ignores indirect consumption; the renewability metric fails to address the quantitative distinction of resources availability; the productivity metric seems self-contradictory. In this paper, the existing Eco-LCA metrics are revised and extended for sustainability assessment of the energy and chemical processes. A new Eco-LCA metrics system is proposed, including four independent dimensions: environmental impact, resource utilization, resource availability, and economic effectiveness. An illustrative example of comparing assessment between a gas boiler and a solar boiler process provides insight into the features of the proposed approach.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Groen, E.A., E-mail: Evelyne.Groen@gmail.com; Heijungs, R.; Leiden University, Einsteinweg 2, Leiden 2333 CC
Life cycle assessment (LCA) is an established tool to quantify the environmental impact of a product. A good assessment of uncertainty is important for making well-informed decisions in comparative LCA, as well as for correctly prioritising data collection efforts. Under- or overestimation of output uncertainty (e.g. output variance) will lead to incorrect decisions in such matters. The presence of correlations between input parameters during uncertainty propagation, can increase or decrease the the output variance. However, most LCA studies that include uncertainty analysis, ignore correlations between input parameters during uncertainty propagation, which may lead to incorrect conclusions. Two approaches to include correlationsmore » between input parameters during uncertainty propagation and global sensitivity analysis were studied: an analytical approach and a sampling approach. The use of both approaches is illustrated for an artificial case study of electricity production. Results demonstrate that both approaches yield approximately the same output variance and sensitivity indices for this specific case study. Furthermore, we demonstrate that the analytical approach can be used to quantify the risk of ignoring correlations between input parameters during uncertainty propagation in LCA. We demonstrate that: (1) we can predict if including correlations among input parameters in uncertainty propagation will increase or decrease output variance; (2) we can quantify the risk of ignoring correlations on the output variance and the global sensitivity indices. Moreover, this procedure requires only little data. - Highlights: • Ignoring correlation leads to under- or overestimation of the output variance. • We demonstrated that the risk of ignoring correlation can be quantified. • The procedure proposed is generally applicable in life cycle assessment. • In some cases, ignoring correlation has a minimal effect on decision-making tools.« less
Hypothermic general cold adaptation induced by local cold acclimation.
Savourey, G; Barnavol, B; Caravel, J P; Feuerstein, C; Bittel, J H
1996-01-01
To study relationships between local cold adaptation of the lower limbs and general cold adaptation, eight subjects were submitted both to a cold foot test (CFT, 5 degrees C water immersion, 5 min) and to a whole-body standard cold air test (SCAT, 1 degree C, 2 h, nude at rest) before and after a local cold acclimation (LCA) of the lower limbs effected by repeated cold water immersions. The LCA induced a local cold adaptation confirmed by higher skin temperatures of the lower limbs during CFT and a hypothermic insulative general cold adaptation (decreased rectal temperature and mean skin temperature P < 0.05) without a change either in metabolic heat production or in lower limb skin temperatures during SCAT after LCA. It was concluded that local cold adaptation was related to the habituation process confirmed by decreased plasma concentrations of noradrenaline (NA) during LCA (P < 0.05). However, the hypothermic insulative general cold adaptation was unrelated either to local cold adaptation or to the habituation process, because an increased NA during SCAT after LCA (P < 0.05) was observed but was rather related to a "T3 polar syndrome" occurring during LCA.
Petraglia, Anthony L.; Chengazi, Harris U.; Chung, Mina M.; Silberstein, Howard J.
2012-01-01
Objective: Leber congenital amaurosis (LCA) is a rare, clinically and genetically heterogeneous disorder characterized by severe loss of vision in the first year of life, affecting approximately 3000 people in the United States. Some LCA patients manifest developmental abnormalities of the central nervous system (CNS) and neuroradiological studies have revealed a variety of cerebral anomalies in association with LCA; however, Chiari I malformations (CMI) have never been described. Case Description: We report two sisters who were referred to the pediatric neurosurgery clinic for evaluation of CMI. The elder sister presented with convergence nystagmus from 3 months of age and magnetic resonance imaging (MRI) demonstrated evidence of significant CMI. Her younger sister began developing nystagmus at 4 months of age. Both had symptomatic progression and underwent suboccipital decompression. Both were subsequently diagnosed with LCA. Case specifics and imaging findings are presented. Conclusions: CMI have been found in association with several genetic syndromes, but not with LCA. These patients represent the first reported cases of CMI with LCA and suggest an additional potential CNS anomaly. The unique occurrence in siblings and the association with another inherited disorder are suggestive of a genetic basis for CMI. PMID:22347674
The changing nature of life cycle assessment
McManus, Marcelle C.; Taylor, Caroline M.
2015-01-01
LCA has evolved from its origins in energy analysis in the 1960s and 70s into a wide ranging tool used to determine impacts of products or systems over several environmental and resource issues. The approach has become more prevalent in research, industry and policy. Its use continues to expand as it seeks to encompass impacts as diverse as resource accounting and social well being. Carbon policy for bioenergy has driven many of these changes. Enabling assessment of complex issues over a life cycle basis is beneficial, but the process is sometimes difficult. LCA's use in framing is increasingly complex and more uncertain, and in some cases, irreconcilable. The charged environment surrounding biofuels and bioenergy exacerbates all of these. Reaching its full potential to help guide difficult policy discussions and emerging research involves successfully managing LCA's transition from attributional to consequential and from retrospective to prospective. This paper examines LCA's on-going evolution and its use within bioenergy deployment. The management of methodological growth in the context of the unique challenges associated with bioenergy and biofuels is explored. Changes seen in bioenergy LCA will bleed into other LCA arenas, especially where it is important that a sustainable solution is chosen. PMID:26664146
Challenge clusters facing LCA in environmental decision-making-what we can learn from biofuels.
McManus, Marcelle C; Taylor, Caroline M; Mohr, Alison; Whittaker, Carly; Scown, Corinne D; Borrion, Aiduan Li; Glithero, Neryssa J; Yin, Yao
Bioenergy is increasingly used to help meet greenhouse gas (GHG) and renewable energy targets. However, bioenergy's sustainability has been questioned, resulting in increasing use of life cycle assessment (LCA). Bioenergy systems are global and complex, and market forces can result in significant changes, relevant to LCA and policy. The goal of this paper is to illustrate the complexities associated with LCA, with particular focus on bioenergy and associated policy development, so that its use can more effectively inform policymakers. The review is based on the results from a series of workshops focused on bioenergy life cycle assessment. Expert submissions were compiled and categorized within the first two workshops. Over 100 issues emerged. Accounting for redundancies and close similarities in the list, this reduced to around 60 challenges, many of which are deeply interrelated. Some of these issues were then explored further at a policy-facing workshop in London, UK. The authors applied a rigorous approach to categorize the challenges identified to be at the intersection of biofuels/bioenergy LCA and policy. The credibility of LCA is core to its use in policy. Even LCAs that comply with ISO standards and policy and regulatory instruments leave a great deal of scope for interpretation and flexibility. Within the bioenergy sector, this has led to frustration and at times a lack of obvious direction. This paper identifies the main challenge clusters: overarching issues, application and practice and value and ethical judgments. Many of these are reflective of the transition from application of LCA to assess individual products or systems to the wider approach that is becoming more common. Uncertainty in impact assessment strongly influences planning and compliance due to challenges in assigning accountability, and communicating the inherent complexity and uncertainty within bioenergy is becoming of greater importance. The emergence of LCA in bioenergy governance is particularly significant because other sectors are likely to transition to similar governance models. LCA is being stretched to accommodate complex and broad policy-relevant questions, seeking to incorporate externalities that have major implications for long-term sustainability. As policy increasingly relies on LCA, the strains placed on the methodology are becoming both clearer and impedimentary. The implications for energy policy, and in particular bioenergy, are large.
Challenge clusters facing LCA in environmental decision-making—what we can learn from biofuels
McManus, Marcelle C.; Taylor, Caroline M.; Mohr, Alison; ...
2015-08-07
Purpose: Bioenergy is increasingly used to help meet greenhouse gas (GHG) and renewable energy targets. However, bioenergy’s sustainability has been questioned, resulting in increasing use of life cycle assessment (LCA). Bioenergy systems are global and complex, and market forces can result in significant changes, relevant to LCA and policy. The goal of this paper is to illustrate the complexities associated with LCA, with particular focus on bioenergy and associated policy development, so that its use can more effectively inform policymakers. Methods: The review is based on the results from a series of workshops focused on bioenergy life cycle assessment. Expertmore » submissions were compiled and categorized within the first two workshops. Over 100 issues emerged. Accounting for redundancies and close similarities in the list, this reduced to around 60 challenges, many of which are deeply interrelated. Some of these issues were then explored further at a policy-facing workshop in London, UK. The authors applied a rigorous approach to categorize the challenges identified to be at the intersection of biofuels/bioenergy LCA and policy. Results and discussion: The credibility of LCA is core to its use in policy. Even LCAs that comply with ISO standards and policy and regulatory instruments leave a great deal of scope for interpretation and flexibility. Within the bioenergy sector, this has led to frustration and at times a lack of obvious direction. This paper identifies the main challenge clusters: overarching issues, application and practice and value and ethical judgments. Many of these are reflective of the transition from application of LCA to assess individual products or systems to the wider approach that is becoming more common. Uncertainty in impact assessment strongly influences planning and compliance due to challenges in assigning accountability, and communicating the inherent complexity and uncertainty within bioenergy is becoming of greater importance. Conclusions: The emergence of LCA in bioenergy governance is particularly significant because other sectors are likely to transition to similar governance models. LCA is being stretched to accommodate complex and broad policy-relevant questions, seeking to incorporate externalities that have major implications for long-term sustainability. As policy increasingly relies on LCA, the strains placed on the methodology are becoming both clearer and impedimentary. The implications for energy policy, and in particular bioenergy, are large.« less
ADHD latent class clusters: DSM-IV subtypes and comorbidity
Elia, Josephine; Arcos-Burgos, Mauricio; Bolton, Kelly L.; Ambrosini, Paul J.; Berrettini, Wade; Muenke, Maximilian
2014-01-01
ADHD (Attention Deficit Hyperactivity Disorder) has a complex, heterogeneous phenotype only partially captured by Diagnostic and Statistical Manual of Mental Disorders (DSM-IV) criteria. In this report, latent class analyses (LCA) are used to identify ADHD phenotypes using K-SADS-IVR (Schedule for Affective Disorders & Schizophrenia for School Age Children-IV-Revised) symptoms and symptom severity data from a clinical sample of 500 ADHD subjects, ages 6–18, participating in an ADHD genetic study. Results show that LCA identified six separate ADHD clusters, some corresponding to specific DSM-IV subtypes while others included several subtypes. DSM-IV comorbid anxiety and mood disorders were generally similar across all clusters, and subjects without comorbidity did not aggregate within any one cluster. Age and gender composition also varied. These results support findings from population-based LCA studies. The six clusters provide additional homogenous groups that can be used to define ADHD phenotypes in genetic association studies. The limited age ranges aggregating in the different clusters may prove to be a particular advantage in genetic studies where candidate gene expression may vary during developmental phases. DSM-IV comorbid mood and anxiety disorders also do not appear to increase cluster heterogeneity; however, longitudinal studies that cover period of risk are needed to support this finding. PMID:19900717
Testing Multi-Alternative Decision Models with Non-Stationary Evidence
Tsetsos, Konstantinos; Usher, Marius; McClelland, James L.
2011-01-01
Recent research has investigated the process of integrating perceptual evidence toward a decision, converging on a number of sequential sampling choice models, such as variants of race and diffusion models and the non-linear leaky competing accumulator (LCA) model. Here we study extensions of these models to multi-alternative choice, considering how well they can account for data from a psychophysical experiment in which the evidence supporting each of the alternatives changes dynamically during the trial, in a way that creates temporal correlations. We find that participants exhibit a tendency to choose an alternative whose evidence profile is temporally anti-correlated with (or dissimilar from) that of other alternatives. This advantage of the anti-correlated alternative is well accounted for in the LCA, and provides constraints that challenge several other models of multi-alternative choice. PMID:21603227
Testing multi-alternative decision models with non-stationary evidence.
Tsetsos, Konstantinos; Usher, Marius; McClelland, James L
2011-01-01
Recent research has investigated the process of integrating perceptual evidence toward a decision, converging on a number of sequential sampling choice models, such as variants of race and diffusion models and the non-linear leaky competing accumulator (LCA) model. Here we study extensions of these models to multi-alternative choice, considering how well they can account for data from a psychophysical experiment in which the evidence supporting each of the alternatives changes dynamically during the trial, in a way that creates temporal correlations. We find that participants exhibit a tendency to choose an alternative whose evidence profile is temporally anti-correlated with (or dissimilar from) that of other alternatives. This advantage of the anti-correlated alternative is well accounted for in the LCA, and provides constraints that challenge several other models of multi-alternative choice.
ERIC Educational Resources Information Center
Toupin, Jean; Déry, Michèle; Verlaan, Pierrette; Lemelin, Jean-Pascal; Lecocq, Aurélie; Jagiellowicz, Jadwiga
2016-01-01
Students with conduct problems (CPs) may present heterogeneity in terms of behavioral manifestations and service needs. Previous studies using Latent Class Analysis (LCA) to capture this heterogeneity have been conducted mostly with community samples and have often applied a narrow definition of CP. Considering this context, this study…
1988-11-01
paint chips at the sampling site. 0 Clean water tanks, pumps, mud pans, hoses, including hoses and tanks used to transfer water from source to drill rig...TO’ LCA , Filll I F’APCr,;I~- € C/ " rKL2PIrlA , ATTFNrIGN TO SMOKING. ALCOHOLF MFDrICATIONP AND FXPOSI.RE TO CARCINOGENS.1 ENERAL MEDICAl. HISTORY...A. General: 1. Place samples in core trough for visual inspection. After logging, place selected samples in sample jars or wood core boxes. 2. Seal
NASA Astrophysics Data System (ADS)
Jeanmairet, Guillaume; Sharma, Sandeep; Alavi, Ali
2017-01-01
In this article we report a stochastic evaluation of the recently proposed multireference linearized coupled cluster theory [S. Sharma and A. Alavi, J. Chem. Phys. 143, 102815 (2015)]. In this method, both the zeroth-order and first-order wavefunctions are sampled stochastically by propagating simultaneously two populations of signed walkers. The sampling of the zeroth-order wavefunction follows a set of stochastic processes identical to the one used in the full configuration interaction quantum Monte Carlo (FCIQMC) method. To sample the first-order wavefunction, the usual FCIQMC algorithm is augmented with a source term that spawns walkers in the sampled first-order wavefunction from the zeroth-order wavefunction. The second-order energy is also computed stochastically but requires no additional overhead outside of the added cost of sampling the first-order wavefunction. This fully stochastic method opens up the possibility of simultaneously treating large active spaces to account for static correlation and recovering the dynamical correlation using perturbation theory. The method is used to study a few benchmark systems including the carbon dimer and aromatic molecules. We have computed the singlet-triplet gaps of benzene and m-xylylene. For m-xylylene, which has proved difficult for standard complete active space self consistent field theory with perturbative correction, we find the singlet-triplet gap to be in good agreement with the experimental values.
Efficient Simulation of Tropical Cyclone Pathways with Stochastic Perturbations
NASA Astrophysics Data System (ADS)
Webber, R.; Plotkin, D. A.; Abbot, D. S.; Weare, J.
2017-12-01
Global Climate Models (GCMs) are known to statistically underpredict intense tropical cyclones (TCs) because they fail to capture the rapid intensification and high wind speeds characteristic of the most destructive TCs. Stochastic parametrization schemes have the potential to improve the accuracy of GCMs. However, current analysis of these schemes through direct sampling is limited by the computational expense of simulating a rare weather event at fine spatial gridding. The present work introduces a stochastically perturbed parametrization tendency (SPPT) scheme to increase simulated intensity of TCs. We adapt the Weighted Ensemble algorithm to simulate the distribution of TCs at a fraction of the computational effort required in direct sampling. We illustrate the efficiency of the SPPT scheme by comparing simulations at different spatial resolutions and stochastic parameter regimes. Stochastic parametrization and rare event sampling strategies have great potential to improve TC prediction and aid understanding of tropical cyclogenesis. Since rising sea surface temperatures are postulated to increase the intensity of TCs, these strategies can also improve predictions about climate change-related weather patterns. The rare event sampling strategies used in the current work are not only a novel tool for studying TCs, but they may also be applied to sampling any range of extreme weather events.
Zhang, Q H; Wang, X C; Xiong, J Q; Chen, R; Cao, B
2010-03-01
In order to illuminate the benefit of a wastewater treatment and reuse project, a life cycle assessment (LCA) model was proposed by combining the process-based LCA and the input-output based LCA in one framework and using energy consumption as the sole parameter for quantitative evaluation of the project. The life cycle consumption was evaluated mainly by life cycle inventory (LCI) analysis taking into account the construction phase, operation phase and demolishment phase of the project. For evaluating the life cycle benefit of treated water reuse, attention was paid to the decrease of secondary effluent discharge and water saving. As a result of comprehensive LCA analysis of a case project in Xi'an, China, it was understood that the life cycle benefit gained from treated wastewater reuse much surpassed the life cycle energy consumption. The advantage of wastewater treatment and reuse was well shown by LCA analysis using the proposed model. 2009 Elsevier Ltd. All rights reserved.
Convergence and rate analysis of neural networks for sparse approximation.
Balavoine, Aurèle; Romberg, Justin; Rozell, Christopher J
2012-09-01
We present an analysis of the Locally Competitive Algorithm (LCA), which is a Hopfield-style neural network that efficiently solves sparse approximation problems (e.g., approximating a vector from a dictionary using just a few nonzero coefficients). This class of problems plays a significant role in both theories of neural coding and applications in signal processing. However, the LCA lacks analysis of its convergence properties, and previous results on neural networks for nonsmooth optimization do not apply to the specifics of the LCA architecture. We show that the LCA has desirable convergence properties, such as stability and global convergence to the optimum of the objective function when it is unique. Under some mild conditions, the support of the solution is also proven to be reached in finite time. Furthermore, some restrictions on the problem specifics allow us to characterize the convergence rate of the system by showing that the LCA converges exponentially fast with an analytically bounded convergence rate. We support our analysis with several illustrative simulations.
Neuromuscular control of fundamental frequency and glottal posture at phonation onset
Chhetri, Dinesh K.; Neubauer, Juergen; Berry, David A.
2012-01-01
The laryngeal neuromuscular mechanisms for modulating glottal posture and fundamental frequency are of interest in understanding normal laryngeal physiology and treating vocal pathology. The intrinsic laryngeal muscles in an in vivo canine model were electrically activated in a graded fashion to investigate their effects on onset frequency, phonation onset pressure, vocal fold strain, and glottal distance at the vocal processes. Muscle activation plots for these laryngeal parameters were evaluated for the interaction of following pairs of muscle activation conditions: (1) cricothyroid (CT) versus all laryngeal adductors (TA/LCA/IA), (2) CT versus LCA/IA, (3) CT versus thyroarytenoid (TA) and, (4) TA versus LCA/IA (LCA: lateral cricoarytenoid muscle, IA: interarytenoid). Increases in onset frequency and strain were primarily affected by CT activation. Onset pressure correlated with activation of all adductors in activation condition 1, but primarily with CT activation in conditions 2 and 3. TA and CT were antagonistic for strain. LCA/IA activation primarily closed the cartilaginous glottis while TA activation closed the mid-membranous glottis. PMID:22352513
Life Cycle Assessment for desalination: a review on methodology feasibility and reliability.
Zhou, Jin; Chang, Victor W-C; Fane, Anthony G
2014-09-15
As concerns of natural resource depletion and environmental degradation caused by desalination increase, research studies of the environmental sustainability of desalination are growing in importance. Life Cycle Assessment (LCA) is an ISO standardized method and is widely applied to evaluate the environmental performance of desalination. This study reviews more than 30 desalination LCA studies since 2000s and identifies two major issues in need of improvement. The first is feasibility, covering three elements that support the implementation of the LCA to desalination, including accounting methods, supporting databases, and life cycle impact assessment approaches. The second is reliability, addressing three essential aspects that drive uncertainty in results, including the incompleteness of the system boundary, the unrepresentativeness of the database, and the omission of uncertainty analysis. This work can serve as a preliminary LCA reference for desalination specialists, but will also strengthen LCA as an effective method to evaluate the environment footprint of desalination alternatives. Copyright © 2014 Elsevier Ltd. All rights reserved.
Sharp, Benjamin E; Miller, Shelie A
2016-03-15
Life cycle assessment (LCA) measures cradle-to-grave environmental impacts of a product. To assess impacts of an emerging technology, LCA should be coupled with additional methods that estimate how that technology might be deployed. The extent and manner that an emerging technology diffuses throughout a region shapes the magnitude and type of environmental impacts. Diffusion of innovation is an established field of research that analyzes the adoption of new innovations, and its principles can be used to construct scenario models that enhance LCA of emerging technologies. Integrating diffusion modeling techniques with an LCA of emerging technology can provide estimates for the extent of market penetration, the displacement of existing systems, and the rate of adoption. Two general perspectives of application are macro-level diffusion models that use a function of time to represent adoption, and microlevel diffusion models that simulate adoption through interactions of individuals. Incorporating diffusion of innovation concepts complement existing methods within LCA to inform proactive environmental management of emerging technologies.
Roh, Min K; Gillespie, Dan T; Petzold, Linda R
2010-11-07
The weighted stochastic simulation algorithm (wSSA) was developed by Kuwahara and Mura [J. Chem. Phys. 129, 165101 (2008)] to efficiently estimate the probabilities of rare events in discrete stochastic systems. The wSSA uses importance sampling to enhance the statistical accuracy in the estimation of the probability of the rare event. The original algorithm biases the reaction selection step with a fixed importance sampling parameter. In this paper, we introduce a novel method where the biasing parameter is state-dependent. The new method features improved accuracy, efficiency, and robustness.
NASA Astrophysics Data System (ADS)
Liao, Qinzhuo; Zhang, Dongxiao; Tchelepi, Hamdi
2017-02-01
A new computational method is proposed for efficient uncertainty quantification of multiphase flow in porous media with stochastic permeability. For pressure estimation, it combines the dimension-adaptive stochastic collocation method on Smolyak sparse grids and the Kronrod-Patterson-Hermite nested quadrature formulas. For saturation estimation, an additional stage is developed, in which the pressure and velocity samples are first generated by the sparse grid interpolation and then substituted into the transport equation to solve for the saturation samples, to address the low regularity problem of the saturation. Numerical examples are presented for multiphase flow with stochastic permeability fields to demonstrate accuracy and efficiency of the proposed two-stage adaptive stochastic collocation method on nested sparse grids.
Area of Concern: a new paradigm in life cycle assessment for ...
Purpose: As a class of environmental metrics, footprints have been poorly defined, have shared an unclear relationship to life cycle assessment (LCA), and the variety of approaches to quantification have sometimes resulted in confusing and contradictory messages in the marketplace. In response, a task force operating under the auspices of the UNEP/SETAC Life Cycle Initiative project on environmental life cycle impact assessment (LCIA) has been working to develop generic guidance for developers of footprint metrics. The purpose of this paper is to introduce a universal footprint definition and related terminology as well as to discuss modelling implications.MethodsThe task force has worked from the perspective that footprints should be based on LCA methodology, underpinned by the same data systems and models as used in LCA. However, there are important differences in purpose and orientation relative to LCA impact category indicators. Footprints have a primary orientation toward society and nontechnical stakeholders. They are also typically of narrow scope, having the purpose of reporting only in relation to specific topics. In comparison, LCA has a primary orientation toward stakeholders interested in comprehensive evaluation of overall environmental performance and trade-offs among impact categories. These differences create tension between footprints, the existing LCIA framework based on the area of protection paradigm and the core LCA standards ISO14040/44.Res
Towards life cycle sustainability assessent of cities. A review of background knowledge.
Albertí, Jaume; Balaguera, Alejandra; Brodhag, Christian; Fullana-I-Palmer, Pere
2017-12-31
This article analyses whether existing LCA and sustainability methods can be used in the assessment of a city or an urban region. The approach is performed through the review of current existing LCA-based and sustainability standards and guidelines. A focus is put into those LCA-based standards specially designed for the built environment. Moreover, a review of non-LCA based standards, indices and guides for the assessment of the sustainability of countries, cities or urban regions is done. The purpose is to check if these assessment tools can provide good results in the absence of LCA-based assessments for cities and urban regions. This review demonstrates the lack of consensus in the definition of both, the city and its boundaries, which hinders the development of useful sustainability standards. Furthermore, it is concluded that current sustainability assessment tools miss, at least, one of these aspects: (i) holistic point of view, (ii) focus on various environmental impacts, (iii) a Life Cycle (LC) perspective, and (iv) the possibility to compare the results among different cities or urban regions. From the LCA perspective, the deficiencies found also include the need for a definition of the function, functional unit (FU), and reference flow (RF) of neighbourhoods, cities, and urban regions. Copyright © 2017 Elsevier B.V. All rights reserved.
Shen, Tao; Guan, Liping; Li, Shiqiang; Zhang, Jianguo; Xiao, Xueshan; Jiang, Hui; Yang, Jianhua; Guo, Xiangming; Wang, Jun; Zhang, Qingjiong
2015-03-01
The genetic defects underlying approximately half of all retinitis pigmentosa (RP) cases are unknown. A number of genes responsible for Leber congenital amaurosis (LCA) may also cause RP when they are mutated. Our previous study revealed that variants in the most frequently mutated nine exons accounted for approximately half of the mutations detected in a cohort of patients with LCA. The aim of the present study was to detect mutations in LCA-associated genes in patients with RP using two different strategies. Sanger sequencing was used to screen mutations in the nine exons in 293 patients with RP and exome sequencing was used to detect variants in 12 LCA-associated genes in 157 of the 293 patients with RP and then to validate the variants by Sanger sequencing. Potential pathogenic mutations were identified in four patients with early onset RP, including homozygous CRB1 mutations in two patients, compound heterozygous CRB1 mutations in one patient and compound heterozygous CEP290 mutations in one patient. The present study indicated that mutations in CEP290 may also be associated with RP but not with LCA. With the exception of CEP290, the remaining 11 genes known to be associated with LCA but not with RP are unlikely to be a common cause of RP.
Teske, Kelly A.; Bogart, Jonathan W.; Sanchez, Luis M.; Yu, Olivia B.; Preston, Joshua V.; Cook, James M.; Silvaggi, Nicholas R.; Bikle, Daniel D.; Arnold, Leggy A.
2016-01-01
A systematic study with phase 1 and phase 2 metabolites of cholesterol and vitamin D was conducted to determine whether their biological activity is mediated by the vitamin D receptor (VDR). The investigation necessitated the development of novel synthetic routes for lithocholic acid (LCA) glucuronides (Gluc). Biochemical and cell-based assays were used to demonstrate that hydroxylated LCA analogs were not able to bind VDR. This excludes VDR from mediating their biological and pharmacological activities. Among the synthesized LCA conjugates a novel VDR agonist was identified. LCA Gluc II increased the expression of CYP24A1 in DU145 cancer cells especially in the presence of the endogenous VDR ligand 1,25(OH)2D3. Furthermore, the methyl ester of LCA was identified as novel VDR antagonist. For the first time, we showed that calcitroic acid, the assumed inactive final metabolite of vitamin D, was able to activate VDR-mediated transcription to a higher magnitude than bile acid LCA. Due to a higher metabolic stability in comparison to vitamin D, a very low toxicity, and high concentration in bile and intestine, calcitroic acid is likely to be an important mediator of the protective vitamin D properties against colon cancer. PMID:26774929
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yuan, Chris, E-mail: cyuan@uwm.edu; Wang, Endong; Zhai, Qiang
Temporal homogeneity of inventory data is one of the major problems in life cycle assessment (LCA). Addressing temporal homogeneity of life cycle inventory data is important in reducing the uncertainties and improving the reliability of LCA results. This paper attempts to present a critical review and discussion on the fundamental issues of temporal homogeneity in conventional LCA and propose a theoretical framework for temporal discounting in LCA. Theoretical perspectives for temporal discounting in life cycle inventory analysis are discussed first based on the key elements of a scientific mechanism for temporal discounting. Then generic procedures for performing temporal discounting inmore » LCA is derived and proposed based on the nature of the LCA method and the identified key elements of a scientific temporal discounting method. A five-step framework is proposed and reported in details based on the technical methods and procedures needed to perform a temporal discounting in life cycle inventory analysis. Challenges and possible solutions are also identified and discussed for the technical procedure and scientific accomplishment of each step within the framework. - Highlights: • A critical review for temporal homogeneity problem of life cycle inventory data • A theoretical framework for performing temporal discounting on inventory data • Methods provided to accomplish each step of the temporal discounting framework.« less
Reboussin, Beth A.; Ialongo, Nicholas S.
2011-01-01
Summary Attention deficit hyperactivity disorder (ADHD) is a neurodevelopmental disorder which is most often diagnosed in childhood with symptoms often persisting into adulthood. Elevated rates of substance use disorders have been evidenced among those with ADHD, but recent research focusing on the relationship between subtypes of ADHD and specific drugs is inconsistent. We propose a latent transition model (LTM) to guide our understanding of how drug use progresses, in particular marijuana use, while accounting for the measurement error that is often found in self-reported substance use data. We extend the LTM to include a latent class predictor to represent empirically derived ADHD subtypes that do not rely on meeting specific diagnostic criteria. We begin by fitting two separate latent class analysis (LCA) models by using second-order estimating equations: a longitudinal LCA model to define stages of marijuana use, and a cross-sectional LCA model to define ADHD subtypes. The LTM model parameters describing the probability of transitioning between the LCA-defined stages of marijuana use and the influence of the LCA-defined ADHD subtypes on these transition rates are then estimated by using a set of first-order estimating equations given the LCA parameter estimates. A robust estimate of the LTM parameter variance that accounts for the variation due to the estimation of the two sets of LCA parameters is proposed. Solving three sets of estimating equations enables us to determine the underlying latent class structures independently of the model for the transition rates and simplifying assumptions about the correlation structure at each stage reduces the computational complexity. PMID:21461139
Bagley, Justin C; Johnson, Jerald B
2014-11-01
Lower Central America (LCA) provides a geologically complex and dynamic, richly biodiverse model for studying the recent assembly and diversification of a Neotropical biota. Here, we review the growing literature of LCA phylogeography studies and their contribution to understanding the origins, assembly, and diversification of the LCA biota against the backdrop of regional geologic and climatic history, and previous biogeographical inquiry. Studies to date reveal that phylogeographical signal within taxa of differing distributions reflects a diversity of patterns and processes rivalling the complexities of LCA landscapes themselves. Even so, phylogeography is providing novel insights into regional diversification (e.g. cryptic lineage divergences), and general evolutionary patterns are emerging. Congruent multi-taxon phylogeographic breaks are found across the Nicaraguan depression, Chorotega volcanic front, western and central Panama, and the Darién isthmus, indicating that a potentially shared history of responses to regional-scale (e.g. geological) processes has shaped the genetic diversity of LCA communities. By contrast, other species show unique demographic histories in response to overriding historical events, including no phylogeographic structure at all. These low-structure or incongruent patterns provide some evidence for a role of local, ecological factors (e.g. long-distance dispersal and gene flow in plants and bats) in shaping LCA communities. Temporally, comparative phylogeographical structuring reflects Pliocene-Pleistocene dispersal and vicariance events consistent with the timeline of emergence of the LCA isthmus and its major physiographic features, e.g. cordilleras. We emphasise the need to improve biogeographic inferences in LCA through in-depth comparative phylogeography projects capitalising on the latest statistical phylogeographical methods. While meeting the challenges of reconstructing the biogeographical history of this complex region, phylogeographers should also take up the critical service to society of applying their work to the conservation of its fascinating biodiversity. © 2014 The Authors. Biological Reviews © 2014 Cambridge Philosophical Society.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Laurent, Alexis, E-mail: alau@dtu.dk; Clavreul, Julie; Bernstad, Anna
Highlights: • We perform a critical review of 222 LCA studies of solid waste management systems. • We analyse the past LCA practice against the ISO standard and ILCD Handbook guidance. • Malpractices exist in many methodological aspects with large variations among studies. • Many of these aspects are important for the reliability of the results. • We provide detailed recommendations to practitioners of waste management LCAs. - Abstract: Life cycle assessment (LCA) is increasingly used in waste management to identify strategies that prevent or minimise negative impacts on ecosystems, human health or natural resources. However, the quality of themore » provided support to decision- and policy-makers is strongly dependent on a proper conduct of the LCA. How has LCA been applied until now? Are there any inconsistencies in the past practice? To answer these questions, we draw on a critical review of 222 published LCA studies of solid waste management systems. We analyse the past practice against the ISO standard requirements and the ILCD Handbook guidelines for each major step within the goal definition, scope definition, inventory analysis, impact assessment, and interpretation phases of the methodology. Results show that malpractices exist in several aspects of the LCA with large differences across studies. Examples are a frequent neglect of the goal definition, a frequent lack of transparency and precision in the definition of the scope of the study, e.g. an unclear delimitation of the system boundaries, a truncated impact coverage, difficulties in capturing influential local specificities such as representative waste compositions into the inventory, and a frequent lack of essential sensitivity and uncertainty analyses. Many of these aspects are important for the reliability of the results. For each of them, we therefore provide detailed recommendations to practitioners of waste management LCAs.« less
Debowska, Agata; Boduszek, Daniel
2017-03-01
Research examining child abuse and neglect (CAN) profiles among adult offender populations is lacking. Therefore, the primary aim of the present study was to address this limitation by using latent class analysis (LCA) to identify meaningful classes of individuals who have experienced physical abuse, emotional abuse, sexual abuse, as well as neglect. Another aim was to estimate the association between CAN class membership and external criteria (psychopathy factors, self-esteem, attitudes towards male sexual violence in dating relationships, child sexual abuse myth acceptance, violent offending, and age). Data were collected among a large systematically selected sample of adult male inmates (N=1261). Based on LCA, three unique classes of CAN were distinguished, including a 'low abuse' group (43.4% of the sample), a 'high physical and emotional abuse' group (51.3%), and a 'poly-victimized' group (5.3%). The analysis revealed that the CAN classes were differentially associated with affective responsiveness, cognitive responsiveness, personal self-esteem, prison self-esteem, attitudes towards male sexual violence in dating relationships, and violent offending. Findings highlight the unique nature of CAN constellations among criminal justice involved participants. The significance of the present results is discussed in relation to past and future research. Potential contributions to treatment strategies are also presented. Copyright © 2016 Elsevier Ltd. All rights reserved.
A Latent Class Analysis of Adolescent Gambling: Application of Resilience Theory
ERIC Educational Resources Information Center
Goldstein, Abby L.; Faulkner, Breanne; Cunningham, Rebecca M.; Zimmerman, Marc A.; Chermack, Stephen; Walton, Maureen A.
2013-01-01
The current study examined the application of resilience theory to adolescent gambling using Latent Class Analysis (LCA) to establish subtypes of adolescent gamblers and to explore risk and promotive factors associated with gambling group membership. Participants were a diverse sample of 249 adolescents ages 14 to 18 (30.1 % female, 59.4 % African…
Patterns of Adolescent Bullying Behaviors: Physical, Verbal, Exclusion, Rumor, and Cyber
ERIC Educational Resources Information Center
Wang, Jing; Iannotti, Ronald J.; Luk, Jeremy W.
2012-01-01
Patterns of engagement in cyber bullying and four types of traditional bullying were examined using latent class analysis (LCA). Demographic differences and externalizing problems were evaluated across latent class membership. Data were obtained from the 2005-2006 Health Behavior in School-aged Survey and the analytic sample included 7,508 U.S.…
Using Latent Class Analysis to Identify Academic and Behavioral Risk Status in Elementary Students
ERIC Educational Resources Information Center
King, Kathleen R.; Lembke, Erica S.; Reinke, Wendy M.
2016-01-01
Identifying classes of children on the basis of academic and behavior risk may have important implications for the allocation of intervention resources within Response to Intervention (RTI) and Multi-Tiered System of Support (MTSS) models. Latent class analysis (LCA) was conducted with a sample of 517 third grade students. Fall screening scores in…
Vinas, Maria; Dorronsoro, Carlos; Cortes, Daniel; Pascual, Daniel; Marcos, Susana
2015-01-01
Longitudinal Chromatic Aberration (LCA) influences the optical quality of the eye. However, the reported LCA varies across studies, likely associated to differences in the measurement techniques. We present LCA measured in subjects using wavefront sensing, double-pass retinal images, and psychophysical methods with a custom-developed polychromatic Adaptive Optics system in a wide spectral range (450-950 nm), with control of subjects’ natural aberrations. LCA measured psychophysically was significantly higher than that from reflectometric techniques (1.51 D vs 1.00 D in the 488-700 nm range). Ours results indicate that the presence of natural aberrations is not the cause for the discrepancies across techniques. PMID:25798317
DOE Office of Scientific and Technical Information (OSTI.GOV)
Liao, Qinzhuo, E-mail: liaoqz@pku.edu.cn; Zhang, Dongxiao; Tchelepi, Hamdi
A new computational method is proposed for efficient uncertainty quantification of multiphase flow in porous media with stochastic permeability. For pressure estimation, it combines the dimension-adaptive stochastic collocation method on Smolyak sparse grids and the Kronrod–Patterson–Hermite nested quadrature formulas. For saturation estimation, an additional stage is developed, in which the pressure and velocity samples are first generated by the sparse grid interpolation and then substituted into the transport equation to solve for the saturation samples, to address the low regularity problem of the saturation. Numerical examples are presented for multiphase flow with stochastic permeability fields to demonstrate accuracy and efficiencymore » of the proposed two-stage adaptive stochastic collocation method on nested sparse grids.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
McManus, Marcelle C.; Taylor, Caroline M.; Mohr, Alison
Purpose: Bioenergy is increasingly used to help meet greenhouse gas (GHG) and renewable energy targets. However, bioenergy’s sustainability has been questioned, resulting in increasing use of life cycle assessment (LCA). Bioenergy systems are global and complex, and market forces can result in significant changes, relevant to LCA and policy. The goal of this paper is to illustrate the complexities associated with LCA, with particular focus on bioenergy and associated policy development, so that its use can more effectively inform policymakers. Methods: The review is based on the results from a series of workshops focused on bioenergy life cycle assessment. Expertmore » submissions were compiled and categorized within the first two workshops. Over 100 issues emerged. Accounting for redundancies and close similarities in the list, this reduced to around 60 challenges, many of which are deeply interrelated. Some of these issues were then explored further at a policy-facing workshop in London, UK. The authors applied a rigorous approach to categorize the challenges identified to be at the intersection of biofuels/bioenergy LCA and policy. Results and discussion: The credibility of LCA is core to its use in policy. Even LCAs that comply with ISO standards and policy and regulatory instruments leave a great deal of scope for interpretation and flexibility. Within the bioenergy sector, this has led to frustration and at times a lack of obvious direction. This paper identifies the main challenge clusters: overarching issues, application and practice and value and ethical judgments. Many of these are reflective of the transition from application of LCA to assess individual products or systems to the wider approach that is becoming more common. Uncertainty in impact assessment strongly influences planning and compliance due to challenges in assigning accountability, and communicating the inherent complexity and uncertainty within bioenergy is becoming of greater importance. Conclusions: The emergence of LCA in bioenergy governance is particularly significant because other sectors are likely to transition to similar governance models. LCA is being stretched to accommodate complex and broad policy-relevant questions, seeking to incorporate externalities that have major implications for long-term sustainability. As policy increasingly relies on LCA, the strains placed on the methodology are becoming both clearer and impedimentary. The implications for energy policy, and in particular bioenergy, are large.« less
Stochastic Investigation of Natural Frequency for Functionally Graded Plates
NASA Astrophysics Data System (ADS)
Karsh, P. K.; Mukhopadhyay, T.; Dey, S.
2018-03-01
This paper presents the stochastic natural frequency analysis of functionally graded plates by applying artificial neural network (ANN) approach. Latin hypercube sampling is utilised to train the ANN model. The proposed algorithm for stochastic natural frequency analysis of FGM plates is validated and verified with original finite element method and Monte Carlo simulation (MCS). The combined stochastic variation of input parameters such as, elastic modulus, shear modulus, Poisson ratio, and mass density are considered. Power law is applied to distribute the material properties across the thickness. The present ANN model reduces the sample size and computationally found efficient as compared to conventional Monte Carlo simulation.
Allegrini, E; Butera, S; Kosson, D S; Van Zomeren, A; Van der Sloot, H A; Astrup, T F
2015-04-01
Residues from industrial processes and waste management systems (WMSs) have been increasingly reutilised, leading to landfilling rate reductions and the optimisation of mineral resource utilisation in society. Life cycle assessment (LCA) is a holistic methodology allowing for the analysis of systems and products and can be applied to waste management systems to identify environmental benefits and critical aspects thereof. From an LCA perspective, residue utilisation provides benefits such as avoiding the production and depletion of primary materials, but it can lead to environmental burdens, due to the potential leaching of toxic substances. In waste LCA studies where residue utilisation is included, leaching has generally been neglected. In this study, municipal solid waste incineration bottom ash (MSWI BA) was used as a case study into three LCA scenarios having different system boundaries. The importance of data quality and parameter selection in the overall LCA results was evaluated, and an innovative method to assess metal transport into the environment was applied, in order to determine emissions to the soil and water compartments for use in an LCA. It was found that toxic impacts as a result of leaching were dominant in systems including only MSWI BA utilisation, while leaching appeared negligible in larger scenarios including the entire waste system. However, leaching could not be disregarded a priori, due to large uncertainties characterising other activities in the scenario (e.g. electricity production). Based on the analysis of relevant parameters relative to leaching, and on general results of the study, recommendations are provided regarding the use of leaching data in LCA studies. Copyright © 2014 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Khelifa, S.
2014-12-01
Using wavelet transform and Allan variance, we have analysed the solutions of weekly position residuals of 09 high latitude DORIS stations in STCD (STation Coordinate Difference) format provided from the three Analysis Centres : IGN-JPL (solution ign11wd01), INASAN (solution ina10wd01) and CNES-CLS (solution lca11wd02), in order to compare the spectral characteristics of their residual noise. The temporal correlations between the three solutions, two by two and station by station, for each component (North, East and Vertical) reveal a high correlation in the horizontal components (North and East). For the North component, the correlation average is about 0.88, 0.81 and 0.79 between, respectively, IGN-INA, IGN-LCA and INA-LCA solutions, then for the East component it is about 0.84, 0.82 and 0.76, respectively. However, the correlations for the Vertical component are moderate with an average of 0.64, 0.57 and 0.58 in, respectively, IGN-INA, IGN-LCA and INA-LCA solutions. After removing the trends and seasonal components from the analysed time series, the Allan variance analysis shows that the three solutions are dominated by a white noise in the all three components (North, East and Vertical). The wavelet transform analysis, using the VisuShrink method with soft thresholding, reveals that the noise level in the LCA solution is less important compared to IGN and INA solutions. Indeed, the standard deviation of the noise for the three components is in the range of 5-11, 5-12 and 4-9mm in the IGN, INA, and LCA solutions, respectively.
Norton, Dean; Shamsi, Shahab A.
2009-01-01
The preparation and characterization of a novel lithocholic acid (LCA)-based liquid crystalline (LC) stationary phase (SP) suitable for application in packed-column CEC and CEC coupled to MS is described. The extent of bonding reactions of LCA-SP was assessed using 1H-NMR, 13C-NMR and elemental analysis. This characterization is followed by application of the LCA-SP for separation of β-blockers, phenylethylamines (PEAs), polyaromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Using the optimum mobile phase operating conditions (pH 3.0-4.5, 10 mM ammonium acetate, 85% v/v ACN), a comparison of the chromatographic ability of the aminopropyl silica phase vs. the LCA-bonded phase was conducted. The results showed improved selectivity for all test analytes using the latter phase. For example, the CEC-MS of β-blockers demonstrated that the LCA-bonded phase provides separation of six out of seven β-blockers, whereas the amino silica phase provides four peaks of several co-eluting β-blockers. For the CEC-MS analysis of PEAs, the LCA-bonded phase showed improved resolution and different selectivity as compared to the aminopropyl phase. An evaluation of the retention trends for PEAs on both phases suggested that the PEAs were retained based on varying degree of hydroxyl substitution on the aromatic ring. In addition, the MS characterization shows several PEAs fragment in the electrospray either by loss of an alkyl group and/or by loss of H2O. Finally, the LCA-bonded phase displayed significantly higher separation selectivity for PAHs and PCBs as compared to the amino silica phase. PMID:18425746
DOE Office of Scientific and Technical Information (OSTI.GOV)
Frischknecht, Rolf; Heath, Garvin; Raugei, Marco
Life Cycle Assessment (LCA) is a structured, comprehensive method of quantifying material- and energy-flows and their associated emissions caused in the life cycle of goods and services. The ISO 14040 and 14044 standards provide the framework for LCA. However, this framework leaves the individual practitioner with a range of choices that can affect the results and thus the conclusions of an LCA study. The current IEA guidelines were developed to provide guidance on assuring consistency, balance, and quality to enhance the credibility and reliability of the results from LCAs on photovoltaic (PV) electricity generation systems. The guidelines represent a consensusmore » among the authors - PV LCA experts in North America, Europe, and Asia - for assumptions made on PV performance, decisions on process input and emissions allocation, methods of analysis, and reporting of the results. Guidance is given on PV-specific parameters used as inputs in LCA and on choices and assumptions in life cycle inventory (LCI) data analysis and on implementation of modeling approaches. A consistent approach towards system modeling, the functional unit, the system boundaries, water use modeling and the allocation aspects enhances the credibility of PV electricity LCA studies and enables balanced LCA-based comparisons of different electricity producing technologies. The document discusses metrics like greenhouse gas emissions (GHG), cumulative energy demand (CED), acidification potential (AP), ozone depletion potential (ODP), human toxicity, ecotoxicity and ionizing radiation. Guidance is given for the definition of the energy payback time (EPBT), the nonrenewable energy payback time (NREPBT), and the impact mitigation potentials (IMP). The indicator energy return on investment (EROI) is described in a separate International Energy Agency (IEA) PV Power Systems (PVPS) Task 12 report (Raugei et al. 2015). The guidelines on the reporting and communication of the results serve the need for producing clear, comprehensive and transparent reports.« less
Variations in embodied energy and carbon emission intensities of construction materials
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wan Omar, Wan-Mohd-Sabki; School of Environmental Engineering, Universiti Malaysia Perlis, 02600 Arau, Perlis; Doh, Jeung-Hwan, E-mail: j.doh@griffith.edu.au
2014-11-15
Identification of parameter variation allows us to conduct more detailed life cycle assessment (LCA) of energy and carbon emission material over their lifecycle. Previous research studies have demonstrated that hybrid LCA (HLCA) can generally overcome the problems of incompleteness and accuracy of embodied energy (EE) and carbon (EC) emission assessment. Unfortunately, the current interpretation and quantification procedure has not been extensively and empirically studied in a qualitative manner, especially in hybridising between the process LCA and I-O LCA. To determine this weakness, this study empirically demonstrates the changes in EE and EC intensities caused by variations to key parameters inmore » material production. Using Australia and Malaysia as a case study, the results are compared with previous hybrid models to identify key parameters and issues. The parameters considered in this study are technological changes, energy tariffs, primary energy factors, disaggregation constant, emission factors, and material price fluctuation. It was found that changes in technological efficiency, energy tariffs and material prices caused significant variations in the model. Finally, the comparison of hybrid models revealed that non-energy intensive materials greatly influence the variations due to high indirect energy and carbon emission in upstream boundary of material production, and as such, any decision related to these materials should be considered carefully. - Highlights: • We investigate the EE and EC intensity variation in Australia and Malaysia. • The influences of parameter variations on hybrid LCA model were evaluated. • Key significant contribution to the EE and EC intensity variation were identified. • High indirect EE and EC content caused significant variation in hybrid LCA models. • Non-energy intensive material caused variation between hybrid LCA models.« less
Diogo, Rui; Bello-Hellegouarch, Gaelle; Kohlsdorf, Tiana; Esteve-Altava, Borja; Molnar, Julia L
2016-09-01
Opossums are frequent subjects of developmental studies because marsupials share developmental features not seen in placentals and because Didelphimorpha is the sister-group of other extant Marsupialia. But is the adult marsupial muscular system markedly different from that of placentals or is it, like the skeletal system, very similar? We provide, for the first time, a brief description of all head and limb muscles of Didelphis virginiana based on our dissections and using a unifying nomenclature by integrating the data gathered in our long-term project on the development, homologies, and evolution of the muscles of all major vertebrate taxa. Our data indicate that there were many more muscle synapomorphic changes from the last common ancestor (LCA) of amniotes to the mammalian LCA (63) and from this LCA to the LCA of extant therians (48) than from this latter LCA to the LCA of extant placentals (10 or 11). Importantly, Didelphis is anatomically more plesiomorphic (only 14 changes from LCA of extant therians) than are rats (37 changes) and humans (63 changes), but its musculature is more complex (193 muscles) than that of humans (only 180 muscles). Of the 194 muscles of Didelphis, 172 (89%) are present in rats, meaning that their adult muscle anatomy is indeed very similar. This similarity supports the existence of a common, easy recognizable therian Bauplan, but one that is caused by developmental constraints and by evolutionary change driven by the needs of the embryos/neonates, rather than by a "goal" toward a specific adult plan/"archetype," as the name Bauplan suggests. Anat Rec, 299:1224-1255, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.
Towards a meaningful assessment of marine ecological impacts in life cycle assessment (LCA).
Woods, John S; Veltman, Karin; Huijbregts, Mark A J; Verones, Francesca; Hertwich, Edgar G
2016-01-01
Human demands on marine resources and space are currently unprecedented and concerns are rising over observed declines in marine biodiversity. A quantitative understanding of the impact of industrial activities on the marine environment is thus essential. Life cycle assessment (LCA) is a widely applied method for quantifying the environmental impact of products and processes. LCA was originally developed to assess the impacts of land-based industries on mainly terrestrial and freshwater ecosystems. As such, impact indicators for major drivers of marine biodiversity loss are currently lacking. We review quantitative approaches for cause-effect assessment of seven major drivers of marine biodiversity loss: climate change, ocean acidification, eutrophication-induced hypoxia, seabed damage, overexploitation of biotic resources, invasive species and marine plastic debris. Our review shows that impact indicators can be developed for all identified drivers, albeit at different levels of coverage of cause-effect pathways and variable levels of uncertainty and spatial coverage. Modeling approaches to predict the spatial distribution and intensity of human-driven interventions in the marine environment are relatively well-established and can be employed to develop spatially-explicit LCA fate factors. Modeling approaches to quantify the effects of these interventions on marine biodiversity are less well-developed. We highlight specific research challenges to facilitate a coherent incorporation of marine biodiversity loss in LCA, thereby making LCA a more comprehensive and robust environmental impact assessment tool. Research challenges of particular importance include i) incorporation of the non-linear behavior of global circulation models (GCMs) within an LCA framework and ii) improving spatial differentiation, especially the representation of coastal regions in GCMs and ocean-carbon cycle models. Copyright © 2016 Elsevier Ltd. All rights reserved.
Morales-Cano, Daniel; Moreno, Laura; Barreira, Bianca; Pandolfi, Rachele; Chamorro, Virginia; Jimenez, Rosario; Villamor, Eduardo; Duarte, Juan; Perez-Vizcaino, Francisco; Cogolludo, Angel
2015-04-01
Voltage-gated potassium channels encoded by KCNQ genes (Kv7 channels) are emerging as important regulators of vascular tone. In this study, we analysed the contribution of Kv7 channels to the vasodilation induced by hypoxia and the cyclic AMP pathway in the coronary circulation. We also assessed their regional distribution and possible impairment by diabetes. We examined the effects of Kv7 channel modulators on K+ currents and vascular reactivity in rat left and right coronary arteries (LCAs and RCAs, respectively). Currents from LCA were more sensitive to Kv7 channel inhibitors (XE991, linopirdine) and activators (flupirtine, retigabine) than those from RCA. Accordingly, LCAs were more sensitive than RCAs to the relaxation induced by Kv7 channel enhancers. Likewise, relaxation induced by the adenylyl cyclase activator forskolin and hypoxia, which were mediated through Kv7 channel activation, were greater in LCA than in RCA. KCNQ1 and KCNQ5 expression was markedly higher in LCA than in RCA. After incubation with high glucose (HG, 30 mmol/L), myocytes from LCA, but not from RCA, were more depolarized and showed reduced Kv7 currents. In HG-incubated LCA, the effects of Kv7 channel modulators and forskolin were diminished, and the expression of KCNQ1 and KCNQ5 was reduced. Finally, vascular responses induced by Kv7 channel modulators were impaired in LCA, but not in RCA, from type 1 diabetic rats. Our results reveal that the high expression and function of Kv7 channels in the LCA and their down-regulation by diabetes critically determine the sensitivity to key regulators of coronary tone. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2015. For permissions please email: journals.permissions@oup.com.
Quantifying the Army Supply Chain Water Bootprint
2011-12-01
Guns, through 30mm Other FSCs 4-3 Several factors affect the accuracy of this result : A major drawback of the Eco- LCA model is that each economic...inflated values produced by the Eco- LCA model. In spite of these issues, the resulting Army water bootprint estimate, although coarse, does provide a...for bulk fuel purchases, the Eco- LCA approach results in a water footprint eight times larger than a footprint that uses literature- based water
Air and Space Power Journal. Volume 25, Number 2, Summer 2011
2011-01-01
their entire life cycles. The EIO- LCA results give Air Force leaders a basis for evaluating alternative ways of implementing the ser- vice’s energy...strategy. Background Before presenting and discussing the EIO- LCA results , the article addresses envi- ronmental concerns associated with burning fuel...to the EIO- LCA model results , the GWP for the CBTL fuel was 14 percent less than that for the JP-8 fuel, not considering car- bon capture. In other
Convergence Speed of a Dynamical System for Sparse Recovery
NASA Astrophysics Data System (ADS)
Balavoine, Aurele; Rozell, Christopher J.; Romberg, Justin
2013-09-01
This paper studies the convergence rate of a continuous-time dynamical system for L1-minimization, known as the Locally Competitive Algorithm (LCA). Solving L1-minimization} problems efficiently and rapidly is of great interest to the signal processing community, as these programs have been shown to recover sparse solutions to underdetermined systems of linear equations and come with strong performance guarantees. The LCA under study differs from the typical L1 solver in that it operates in continuous time: instead of being specified by discrete iterations, it evolves according to a system of nonlinear ordinary differential equations. The LCA is constructed from simple components, giving it the potential to be implemented as a large-scale analog circuit. The goal of this paper is to give guarantees on the convergence time of the LCA system. To do so, we analyze how the LCA evolves as it is recovering a sparse signal from underdetermined measurements. We show that under appropriate conditions on the measurement matrix and the problem parameters, the path the LCA follows can be described as a sequence of linear differential equations, each with a small number of active variables. This allows us to relate the convergence time of the system to the restricted isometry constant of the matrix. Interesting parallels to sparse-recovery digital solvers emerge from this study. Our analysis covers both the noisy and noiseless settings and is supported by simulation results.
Kang, Se-Chan; Kim, Hee Jung; Kim, Mi-Hyun
2013-01-01
It has been reported that Astragalus membranaceus, an Asian traditional herb, has an estrogenic effect in vitro. To examine the possible role of A. membranaceus extract with supplemental calcium (Ca) on bone status in calcium-deficient (LCa) ovariectomized (OVX) rats, a total of 48 female rats were divided into six groups: (1) normal control, (2) sham operation with LCa (sham-LCa), (3) OVX with LCa (OVX-LCa), (4) A. membranaceus supplementation with OVX-LCa (OVX-MLCa), (5) Ca supplementation with OVX (OVX-Ca), and (6) A. membranaceus and Ca supplementation with OVX (OVX-MCa). A. membranaceus ethanol extract (500 mg/kg BW) and/or Ca (800 mg/kg BW) were administered orally for 8 weeks along with a Ca-deficient diet. Results revealed that Ca supplementation with or without A. membranaceus extract significantly improved bone mineral density, biomechanical strength, and ash weight of the femur and tibia in OVX rats. High Ca with A. membranaceus combination supplementation significantly increased the ash weight of the femur and tibia and decreased urinary Ca excretion compared with supplementation of Ca alone. Uterine weight was not changed by A. membranaceus administration in OVX rats. These results suggest that A. membranaceus extract combined with supplemental Ca may be more protective against the Ca loss of bone than A. membranaceus or supplementation of Ca alone in calcium-insufficient postmenopausal women.
Sartipi, Majid; Nedjat, Saharnaz; Mansournia, Mohammad Ali; Baigi, Vali; Fotouhi, Akbar
2016-11-01
Some variables like Socioeconomic Status (SES) cannot be directly measured, instead, so-called 'latent variables' are measured indirectly through calculating tangible items. There are different methods for measuring latent variables such as data reduction methods e.g. Principal Components Analysis (PCA) and Latent Class Analysis (LCA). The purpose of our study was to measure assets index- as a representative of SES- through two methods of Non-Linear PCA (NLPCA) and LCA, and to compare them for choosing the most appropriate model. This was a cross sectional study in which 1995 respondents filled the questionnaires about their assets in Tehran. The data were analyzed by SPSS 19 (CATPCA command) and SAS 9.2 (PROC LCA command) to estimate their socioeconomic status. The results were compared based on the Intra-class Correlation Coefficient (ICC). The 6 derived classes from LCA based on BIC, were highly consistent with the 6 classes from CATPCA (Categorical PCA) (ICC = 0.87, 95%CI: 0.86 - 0.88). There is no gold standard to measure SES. Therefore, it is not possible to definitely say that a specific method is better than another one. LCA is a complicated method that presents detailed information about latent variables and required one assumption (local independency), while NLPCA is a simple method, which requires more assumptions. Generally, NLPCA seems to be an acceptable method of analysis because of its simplicity and high agreement with LCA.
Zhai, Pei; Williams, Eric D
2010-10-15
This paper advances the life cycle assessment (LCA) of photovoltaic systems by expanding the boundary of the included processes using hybrid LCA and accounting for the technology-driven dynamics of embodied energy and carbon emissions. Hybrid LCA is an extended method that combines bottom-up process-sum and top-down economic input-output (EIO) methods. In 2007, the embodied energy was 4354 MJ/m(2) and the energy payback time (EPBT) was 2.2 years for a multicrystalline silicon PV system under 1700 kWh/m(2)/yr of solar radiation. These results are higher than those of process-sum LCA by approximately 60%, indicating that processes excluded in process-sum LCA, such as transportation, are significant. Even though PV is a low-carbon technology, the difference between hybrid and process-sum results for 10% penetration of PV in the U.S. electrical grid is 0.13% of total current grid emissions. Extending LCA from the process-sum to hybrid analysis makes a significant difference. Dynamics are characterized through a retrospective analysis and future outlook for PV manufacturing from 2001 to 2011. During this decade, the embodied carbon fell substantially, from 60 g CO(2)/kWh in 2001 to 21 g/kWh in 2011, indicating that technological progress is realizing reductions in embodied environmental impacts as well as lower module price.
Accommodation to wavefront vergence and chromatic aberration.
Wang, Yinan; Kruger, Philip B; Li, James S; Lin, Peter L; Stark, Lawrence R
2011-05-01
Longitudinal chromatic aberration (LCA) provides a cue to accommodation with small pupils. However, large pupils increase monochromatic aberrations, which may obscure chromatic blur. In this study, we examined the effect of pupil size and LCA on accommodation. Accommodation was recorded by infrared optometer while observers (nine normal trichromats) viewed a sinusoidally moving Maltese cross target in a Badal stimulus system. There were two illumination conditions: white (3000 K; 20 cd/m) and monochromatic (550 nm with 10 nm bandwidth; 20 cd/m) and two artificial pupil conditions (3 and 5.7 mm). Separately, static measurements of wavefront aberration were made with the eye accommodating to targets between 0 and 4 D (COAS, Wavefront Sciences). Large individual differences in accommodation to wavefront vergence and to LCA are a hallmark of accommodation. LCA continues to provide a signal at large pupil sizes despite higher levels of monochromatic aberrations. Monochromatic aberrations may defend against chromatic blur at high spatial frequencies, but accommodation responds best to optical vergence and to LCA at 3 c/deg where blur from higher order aberrations is less.
Accommodation to Wavefront Vergence and Chromatic Aberration
Wang, Yinan; Kruger, Philip B.; Li, James S.; Lin, Peter L.; Stark, Lawrence R.
2011-01-01
Purpose Longitudinal chromatic aberration (LCA) provides a cue to accommodation with small pupils. However, large pupils increase monochromatic aberrations, which may obscure chromatic blur. In the present study, we examined the effect of pupil size and LCA on accommodation. Methods Accommodation was recorded by infrared optometer while observers (nine normal trichromats) viewed a sinusoidally moving Maltese cross target in a Badal stimulus system. There were two illumination conditions: white (3000 K; 20 cd/m2) and monochromatic (550 nm with 10 nm bandwidth; 20 cd/m2) and two artificial pupil conditions (3 mm and 5.7 mm). Separately, static measurements of wavefront aberration were made with the eye accommodating to targets between 0 and 4 D (COAS, Wavefront Sciences). Results Large individual differences in accommodation to wavefront vergence and to LCA are a hallmark of accommodation. LCA continues to provide a signal at large pupil sizes despite higher levels of monochromatic aberrations. Conclusions Monochromatic aberrations may defend against chromatic blur at high spatial frequencies, but accommodation responds best to optical vergence and to LCA at 3 c/deg where blur from higher order aberrations is less. PMID:21317666
An active coronagraph using a liquid crystal array for exoplanet imaging: principle and testing
NASA Astrophysics Data System (ADS)
Zhang, Xi; Ren, De-Qing; Zhu, Yong-Tian; Dou, Jiang-Pei
2012-05-01
High-contrast imaging coronagraphs, used for the detection of exoplanets, have always adopted passive coronagraph optical components. It is therefore impossible to actively optimize the coronagraphs to achieve their best performance. To solve this problem, we propose a novel high-contrast imaging coronagraph which combines a liquid crystal array (LCA) for active pupil apodization and a deformable mirror (DM) for phase correction. The LCA we use is an amplitude-only spatial light modulator. The LCA is well calibrated and compensates for its amplitude non-uniformity and nonlinear intensity responsivity. We measured the imaging contrasts of the coronagraph system with the LCA only and without the DM deployed. Imaging contrasts of 10-4 and 10-5 can be reached at an inner working angular distance of 2.5 and 5λ/D, respectively. A simulation shows that the phase errors on the coronagraph pupil limit the contrast performance. The contrast could be further improved if a DM is deployed to correct the phase errors induced by the LCA and coronagraph optics.
The facial skeleton of the chimpanzee-human last common ancestor
Cobb, Samuel N
2008-01-01
This review uses the current morphological evidence to evaluate the facial morphology of the hypothetical last common ancestor (LCA) of the chimpanzee/bonobo (panin) and human (hominin) lineages. Some of the problems involved in reconstructing ancestral morphologies so close to the formation of a lineage are discussed. These include the prevalence of homoplasy and poor phylogenetic resolution due to a lack of defining derived features. Consequently the list of hypothetical features expected in the face of the LCA is very limited beyond its hypothesized similarity to extant Pan. It is not possible to determine with any confidence whether the facial morphology of any of the current candidate LCA taxa (Ardipithecus kadabba, Ardipithecus ramidus, Orrorin tugenensis and Sahelanthropus tchadensis) is representative of the LCA, or a stem hominin, or a stem panin or, in some cases, a hominid predating the emergence of the hominin lineage. The major evolutionary trends in the hominin lineage subsequent to the LCA are discussed in relation to the dental arcade and dentition, subnasal morphology and the size, position and prognathism of the facial skeleton. PMID:18380866
Cederberg, C; Henriksson, M; Berglund, M
2013-06-01
The last decade has seen an increase in environmental systems analysis of livestock production, resulting in a significant number of studies with a holistic approach often based on life-cycle assessment (LCA) methodology. The growing public interest in global warming has added to this development; guidelines for carbon footprint (CF) accounting have been developed, including for greenhouse gas (GHG) accounting of animal products. Here we give an overview of methods for estimating GHG emissions, with emphasis on nitrous oxide, methane and carbon from land use change, presently used in LCA/CF studies of animal products. We discuss where methods and data availability for GHGs and nitrogen (N) compounds most urgently need to be improved in order to produce more accurate environmental assessments of livestock production. We conclude that the top priority is to improve models for N fluxes and emissions from soils and to implement soil carbon change models in LCA/CF studies of animal products. We also point at the need for more farm data and studies measuring emissions from soils, manure and livestock in developing countries.
ERIC Educational Resources Information Center
Reid, Joan A.; Sullivan, Christopher J.
2016-01-01
Using latent class analysis (LCA), this study identified a dyadic taxonomy of delinquent youth categorized by varying types of maternal-youth reporting discrepancies (i.e., youth < maternal, youth > maternal) within a sample of 764 14-year-old high-risk youth. Four distinctive subgroups of youth were identified, two of which reported more…
ERIC Educational Resources Information Center
Peterson, Carol B.; Crow, Scott J.; Swanson, Sonja A.; Crosby, Ross D.; Wonderlich, Stephen A.; Mitchell, James E.; Agras, W. Stewart; Halmi, Katherine A.
2011-01-01
Objective: The purpose of this investigation was to derive an empirical classification of eating disorder symptoms in a heterogeneous eating disorder sample using latent class analysis (LCA) and to examine the longitudinal stability of these latent classes (LCs) and the stability of DSM-IV eating disorder (ED) diagnoses. Method: A total of 429…
NASA Astrophysics Data System (ADS)
Wang, Ting; Plecháč, Petr
2017-12-01
Stochastic reaction networks that exhibit bistable behavior are common in systems biology, materials science, and catalysis. Sampling of stationary distributions is crucial for understanding and characterizing the long-time dynamics of bistable stochastic dynamical systems. However, simulations are often hindered by the insufficient sampling of rare transitions between the two metastable regions. In this paper, we apply the parallel replica method for a continuous time Markov chain in order to improve sampling of the stationary distribution in bistable stochastic reaction networks. The proposed method uses parallel computing to accelerate the sampling of rare transitions. Furthermore, it can be combined with the path-space information bounds for parametric sensitivity analysis. With the proposed methodology, we study three bistable biological networks: the Schlögl model, the genetic switch network, and the enzymatic futile cycle network. We demonstrate the algorithmic speedup achieved in these numerical benchmarks. More significant acceleration is expected when multi-core or graphics processing unit computer architectures and programming tools such as CUDA are employed.
Lin, Wei-Chih; Lin, Yu-Pin; Wang, Yung-Chieh; Chang, Tsun-Kuo; Chiang, Li-Chi
2014-02-21
In this study, a deconvolution procedure was used to create a variogram of oral cancer (OC) rates. Based on the variogram, area-to-point (ATP) Poisson kriging and p-field simulation were used to downscale and simulate, respectively, the OC rate data for Taiwan from the district scale to a 1 km × 1 km grid scale. Local cluster analysis (LCA) of OC mortality rates was then performed to identify OC mortality rate hot spots based on the downscaled and the p-field-simulated OC mortality maps. The relationship between OC mortality and land use was studied by overlapping the maps of the downscaled OC mortality, the LCA results, and the land uses. One thousand simulations were performed to quantify local and spatial uncertainties in the LCA to identify OC mortality hot spots. The scatter plots and Spearman's rank correlation yielded the relationship between OC mortality and concentrations of the seven metals in the 1 km cell grid. The correlation analysis results for the 1 km scale revealed a weak correlation between OC mortality rate and concentrations of the seven studied heavy metals in soil. Accordingly, the heavy metal concentrations in soil are not major determinants of OC mortality rates at the 1 km scale at which soils were sampled. The LCA statistical results for local indicator of spatial association (LISA) revealed that the sites with high probability of high-high (high value surrounded by high values) OC mortality at the 1 km grid scale were clustered in southern, eastern, and mid-western Taiwan. The number of such sites was also significantly higher on agricultural land and in urban regions than on land with other uses. The proposed approach can be used to downscale and evaluate uncertainty in mortality data from a coarse scale to a fine scale at which useful additional information can be obtained for assessing and managing land use and risk.
Arcot Sadagopan, Karthikeyan; Battista, Robert; Keep, Rosanne B; Capasso, Jenina E; Levin, Alex V
2015-06-01
Leber congenital amaurosis (LCA) is most often an autosomal recessive disorder. We report a father and son with autosomal dominant LCA due to a mutation in the CRX gene. DNA screening using an allele specific assay of 90 of the most common LCA-causing variations in the coding sequences of AIPL1, CEP290, CRB1, CRX, GUCY2D, RDH12 and RPE65 was performed on the father. Automated DNA sequencing of his son examining exon 3 of the CRX gene was subsequently performed. Both father and son have a heterozygous single base pair deletion of an adenine at codon 153 in the coding sequence of the CRX gene resulting in a frameshift mutation. Mutations involving the CRX gene may demonstrate an autosomal dominant inheritance pattern for LCA.
Understanding the LCA and ISO water footprint: A response to ...
Water footprinting has emerged as an important approach to assess water use related effects from consumption of goods and services. Assessment methods are proposed by two different communities, the Water Footprint Network (WFN) and the Life Cycle Assessment (LCA) community. The proposed methods are broadly similar and encompass both the computation of water use and its impacts, but differ in communication of a water footprint result. In this paper, we explain the role and goal of LCA and ISO-compatible water footprinting and resolve the six issues raised by Hoekstra (2016) in “A critique on the water-scarcity weighted water footprint in LCA”. By clarifying the concerns, we identify both the overlapping goals in the WFN and LCA water footprint assessments and discrepancies between them. The main differing perspective between the WFN and LCA-based approach seems to relate to the fact that LCA aims to account for environmental impacts, while the WFN aims to account for water productivity of global fresh water as a limited resource. We conclude that there is potential to use synergies in research for the two approaches and highlight the need for proper declaration of the methods applied. This paper advances efforts to understand ways to accurately capture use of water in life cycle analysis in other contexts. As the paper indicates, there is a discussion about whether quantities of water should be weighted by some local stress factor. This paper attempts to brid
Laurent, Alexis; Clavreul, Julie; Bernstad, Anna; Bakas, Ioannis; Niero, Monia; Gentil, Emmanuel; Christensen, Thomas H; Hauschild, Michael Z
2014-03-01
Life cycle assessment (LCA) is increasingly used in waste management to identify strategies that prevent or minimise negative impacts on ecosystems, human health or natural resources. However, the quality of the provided support to decision- and policy-makers is strongly dependent on a proper conduct of the LCA. How has LCA been applied until now? Are there any inconsistencies in the past practice? To answer these questions, we draw on a critical review of 222 published LCA studies of solid waste management systems. We analyse the past practice against the ISO standard requirements and the ILCD Handbook guidelines for each major step within the goal definition, scope definition, inventory analysis, impact assessment, and interpretation phases of the methodology. Results show that malpractices exist in several aspects of the LCA with large differences across studies. Examples are a frequent neglect of the goal definition, a frequent lack of transparency and precision in the definition of the scope of the study, e.g. an unclear delimitation of the system boundaries, a truncated impact coverage, difficulties in capturing influential local specificities such as representative waste compositions into the inventory, and a frequent lack of essential sensitivity and uncertainty analyses. Many of these aspects are important for the reliability of the results. For each of them, we therefore provide detailed recommendations to practitioners of waste management LCAs. Copyright © 2013 Elsevier Ltd. All rights reserved.
Wang, Shi-Yuan; Zhang, Qi; Zhang, Xiang; Zhao, Pei-Quan
2016-01-01
To make a comprehensive analysis of the potential pathogenic genes related with Leber congenital amaurosis (LCA) in Chinese. LCA subjects and their families were retrospectively collected from 2013 to 2015. Firstly, whole-exome sequencing was performed in patients who had underwent gene mutation screening with nothing found, and then homozygous sites was selected, candidate sites were annotated, and pathogenic analysis was conducted using softwares including Sorting Tolerant from Intolerant (SIFT), Polyphen-2, Mutation assessor, Condel, and Functional Analysis through Hidden Markov Models (FATHMM). Furthermore, Gene Ontology function and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analyses of pathogenic genes were performed followed by co-segregation analysis using Fisher exact Test. Sanger sequencing was used to validate single-nucleotide variations (SNVs). Expanded verification was performed in the rest patients. Totally 51 LCA families with 53 patients and 24 family members were recruited. A total of 104 SNVs (66 LCA-related genes and 15 co-segregated genes) were submitted for expand verification. The frequencies of homozygous mutation of KRT12 and CYP1A1 were simultaneously observed in 3 families. Enrichment analysis showed that the potential pathogenic genes were mainly enriched in functions related to cell adhesion, biological adhesion, retinoid metabolic process, and eye development biological adhesion. Additionally, WFS1 and STAU2 had the highest homozygous frequencies. LCA is a highly heterogeneous disease. Mutations in KRT12, CYP1A1, WFS1, and STAU2 may be involved in the development of LCA.
Farji-Brener, Alejandro G; Elizalde, Luciana; Fernández-Marín, Hermógenes; Amador-Vargas, Sabrina
2016-05-25
Adequate waste management is vital for the success of social life, because waste accumulation increases sanitary risks in dense societies. We explored why different leaf-cutting ants (LCA) species locate their waste in internal nest chambers or external piles, including ecological context and accounting for phylogenetic relations. We propose that waste location depends on whether the environmental conditions enhance or reduce the risk of infection. We obtained the geographical range, habitat and refuse location of LCA from published literature, and experimentally determined whether pathogens on ant waste survived to the high soil temperatures typical of xeric habitats. The habitat of the LCA determined waste location after phylogenetic correction: species with external waste piles mainly occur in xeric environments, whereas those with internal waste chambers mainly inhabit more humid habitats. The ancestral reconstruction suggests that dumping waste externally is less derived than digging waste nest chambers. Empirical results showed that high soil surface temperatures reduce pathogen prevalence from LCA waste. We proposed that LCA living in environments unfavourable for pathogens (i.e. xeric habitats) avoid digging costs by dumping the refuse above ground. Conversely, in environments suitable for pathogens, LCA species prevent the spread of diseases by storing waste underground, presumably, a behaviour that contributed to the colonization of humid habitats. These results highlight the adaptation of organisms to the hygienic challenges of social living, and illustrate how sanitary behaviours can result from a combination of evolutionary history and current environmental conditions. © 2016 The Author(s).
Farji-Brener, Alejandro G.; Elizalde, Luciana; Amador-Vargas, Sabrina
2016-01-01
Adequate waste management is vital for the success of social life, because waste accumulation increases sanitary risks in dense societies. We explored why different leaf-cutting ants (LCA) species locate their waste in internal nest chambers or external piles, including ecological context and accounting for phylogenetic relations. We propose that waste location depends on whether the environmental conditions enhance or reduce the risk of infection. We obtained the geographical range, habitat and refuse location of LCA from published literature, and experimentally determined whether pathogens on ant waste survived to the high soil temperatures typical of xeric habitats. The habitat of the LCA determined waste location after phylogenetic correction: species with external waste piles mainly occur in xeric environments, whereas those with internal waste chambers mainly inhabit more humid habitats. The ancestral reconstruction suggests that dumping waste externally is less derived than digging waste nest chambers. Empirical results showed that high soil surface temperatures reduce pathogen prevalence from LCA waste. We proposed that LCA living in environments unfavourable for pathogens (i.e. xeric habitats) avoid digging costs by dumping the refuse above ground. Conversely, in environments suitable for pathogens, LCA species prevent the spread of diseases by storing waste underground, presumably, a behaviour that contributed to the colonization of humid habitats. These results highlight the adaptation of organisms to the hygienic challenges of social living, and illustrate how sanitary behaviours can result from a combination of evolutionary history and current environmental conditions. PMID:27226469
Broadening GHG accounting with LCA: application to a waste management business unit.
Fallaha, Sophie; Martineau, Geneviève; Bécaert, Valérie; Margni, Manuele; Deschênes, Louise; Samson, Réjean; Aoustin, Emmanuelle
2009-11-01
In an effort to obtain the most accurate climate change impact assessment, greenhouse gas (GHG) accounting is evolving to include life-cycle thinking. This study (1) identifies similarities and key differences between GHG accounting and life-cycle assessment (LCA), (2) compares them on a consistent basis through a case study on a waste management business unit. First, GHG accounting is performed. According to the GHG Protocol, annual emissions are categorized into three scopes: direct GHG emissions (scope 1), indirect emissions related to electricity, heat and steam production (scope 2) and other indirect emissions (scope 3). The LCA is then structured into a comparable framework: each LCA process is disaggregated into these three scopes, the annual operating activities are assessed, and the environmental impacts are determined using the IMPACT2002+ method. By comparing these two approaches it is concluded that both LCA and GHG accounting provide similar climate change impact results as the same major GHG contributors are determined for scope 1 emissions. The emissions from scope 2 appear negligible whereas emissions from scope 3 cannot be neglected since they contribute to around 10% of the climate change impact of the waste management business unit. This statement is strengthened by the fact that scope 3 generates 75% of the resource use damage and 30% of the ecosystem quality damage categories. The study also shows that LCA can help in setting up the framework for a annual GHG accounting by determining the major climate change contributors.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bertholon, François; Harant, Olivier; Bourlon, Bertrand
This article introduces a joined Bayesian estimation of gas samples issued from a gas chromatography column (GC) coupled with a NEMS sensor based on Giddings Eyring microscopic molecular stochastic model. The posterior distribution is sampled using a Monte Carlo Markov Chain and Gibbs sampling. Parameters are estimated using the posterior mean. This estimation scheme is finally applied on simulated and real datasets using this molecular stochastic forward model.
Walton, David M; Lefebvre, Andy; Reynolds, Darcy
2015-06-01
Illness representations pertain to the ways in which an individual constructs and understands the experience of a health condition. The Brief Illness Perceptions Questionnaire (BIPQ) comprises 9 items intended to capture the key components of the Illness Representations Model. The purpose of this paper was to explore the utility of the BIPQ for evaluating and classifying uncomplicated mechanical neck pain in the rehabilitation setting. A convenience sample of 198 subjects presenting to physiotherapy for neck pain problems were used in this study. In the first step, 183 subjects completed the BIPQ and a series of related cognitive measures. Latent class analysis (LCA) was used to explore the number of identifiable classes amongst the sample based on BIPQ response patterns. A regression equation was created to facilitate classification. In the second step, an independent sample of 15 subjects were classified using the equation established in step 1, and they were followed over a 3 month period. The LCA revealed 3 classes of subjects with optimal fit statistics: mildly affected, moderately affected, and severely affected. Inter-group comparisons of the secondary cognitive measures supported these labels. Classification accuracy of a regression equation was high (94.5%). Applying the equation to the independent longitudinal sample revealed that it functioned equally well and that the classes may have prognostic value. The BIPQ may be a useful clinical tool for classification of neck pain. Copyright © 2014 Elsevier Ltd. All rights reserved.
Hansen, Maj; Műllerová, Jana; Elklit, Ask; Armour, Cherie
2016-08-01
For over a century, the occurrence of dissociative symptoms in connection to traumatic exposure has been acknowledged in the scientific literature. Recently, the importance of dissociation has also been recognized in the long-term traumatic response within the DSM-5 nomenclature. Several studies have confirmed the existence of the dissociative posttraumatic stress disorder (PTSD) subtype. However, there is a lack of studies investigating latent profiles of PTSD solely in victims with PTSD. This study investigates the possible presence of PTSD subtypes using latent class analysis (LCA) across two distinct trauma samples meeting caseness for DSM-5 PTSD based on self-reports (N = 787). Moreover, we assessed if a number of risk factors resulted in an increased probability of membership in a dissociative compared with a non-dissociative PTSD class. The results of LCA revealed a two-class solution with two highly symptomatic classes: a dissociative class and a non-dissociative class across both samples. Increased emotion-focused coping increased the probability of individuals being grouped into the dissociative class across both samples. Social support reduced the probability of individuals being grouped into the dissociative class but only in the victims of motor vehicle accidents (MVAs) suffering from whiplash. The results are discussed in light of their clinical implications and suggest that the dissociative subtype can be identified in victims of incest and victims of MVA suffering from whiplash meeting caseness for DSM-5 PTSD.
A thematic review of life cycle assessment (LCA) applied to pig production
DOE Office of Scientific and Technical Information (OSTI.GOV)
McAuliffe, Graham A., E-mail: g.a.mcauliffe@umail.ucc.ie; School of Biological, Earth and Environmental Sciences, University College Cork, Distillery Fields, North Mall, Cork; Chapman, Deborah V.
Commercial livestock production is known to have significant impacts on the environment. Pig production is a complex system which involves the production of animal feed, transportation, animal rearing and waste management. One tool for assessing the environmental performance of such complex systems is life cycle assessment (LCA). LCA has been applied to pig production considerably to date. This paper provides a chronological review of state-of-the-art pig production LCAs under three themes: feed production; entire-system livestock rearing; and waste management. The study considers how LCA applications have addressed technological improvements in animal husbandry, and highlights methodological limitations, particularly related to cross-studymore » comparisons. Recent research demonstrates crude protein reduction in feed and anaerobic treatment of pig excreta resulting in bioenergy production are the key targets for environmental performance improvements related to pig production. - Highlights: • An extensive review of LCA applied to pig production is provided chronologically over the past decade. • Individual studies have been categorised into feed, whole-system pig production and waste management themes. • We consider how LCAs have addressed state-of-the-art pig husbandry. • We offer a discussion on key findings, limitations and future research.« less
NASA Astrophysics Data System (ADS)
Shonnard, David R.; Klemetsrud, Bethany; Sacramento-Rivero, Julio; Navarro-Pineda, Freddy; Hilbert, Jorge; Handler, Robert; Suppen, Nydia; Donovan, Richard P.
2015-12-01
Life-cycle assessment (LCA) has been applied to many biofuel and bioenergy systems to determine potential environmental impacts, but the conclusions have varied. Different methodologies and processes for conducting LCA of biofuels make the results difficult to compare, in-turn making it difficult to make the best possible and informed decision. Of particular importance are the wide variability in country-specific conditions, modeling assumptions, data quality, chosen impact categories and indicators, scale of production, system boundaries, and co-product allocation. This study has a double purpose: conducting a critical evaluation comparing environmental LCA of biofuels from several conversion pathways and in several countries in the Pan American region using both qualitative and quantitative analyses, and making recommendations for harmonization with respect to biofuel LCA study features, such as study assumptions, inventory data, impact indicators, and reporting practices. The environmental management implications are discussed within the context of different national and international regulatory environments using a case study. The results from this study highlight LCA methodology choices that cause high variability in results and limit comparability among different studies, even among the same biofuel pathway, and recommendations are provided for improvement.
Assessment of Effectiveness and Limitations of Habitat Suitability Models for Wetland Restoration
Draugelis-Dale, Rassa O.
2008-01-01
Habitat suitability index (HSI) models developed for wildlife in the Louisiana Coastal Area Comprehensive Ecosystem Restoration Plan (LCA study) have been assessed for parameter and overall model quality. The success of the suitability models from the South Florida Water Management District for The Everglades restoration project and from the Spatially Explicit Species Index Models (SESI) of the Across Trophic Level System Simulation (ATLSS) Program of Florida warranted investigation with possible application of modeling theory to the current LCA study. General HSI models developed by the U.S. Fish and Wildlife Service were also investigated. This report presents examinations of theoretical formulae and comparisons of the models, performed by using diverse hypothetical settings of hydrological/biological ecosystems to highlight weaknesses as well as strengths among the models, limited to the American alligator and selected wading bird species (great blue heron, great egret, and white ibis). Recommendations were made for the LCA study based on these assessments. An enhanced HSI model for the LCA study is proposed for the American alligator, and a new HSI model for wading birds is introduced for the LCA study. Performance comparisons of the proposed models with the other suitability models are made by using the aforementioned hypothetical settings.
Shonnard, David R; Klemetsrud, Bethany; Sacramento-Rivero, Julio; Navarro-Pineda, Freddy; Hilbert, Jorge; Handler, Robert; Suppen, Nydia; Donovan, Richard P
2015-12-01
Life-cycle assessment (LCA) has been applied to many biofuel and bioenergy systems to determine potential environmental impacts, but the conclusions have varied. Different methodologies and processes for conducting LCA of biofuels make the results difficult to compare, in-turn making it difficult to make the best possible and informed decision. Of particular importance are the wide variability in country-specific conditions, modeling assumptions, data quality, chosen impact categories and indicators, scale of production, system boundaries, and co-product allocation. This study has a double purpose: conducting a critical evaluation comparing environmental LCA of biofuels from several conversion pathways and in several countries in the Pan American region using both qualitative and quantitative analyses, and making recommendations for harmonization with respect to biofuel LCA study features, such as study assumptions, inventory data, impact indicators, and reporting practices. The environmental management implications are discussed within the context of different national and international regulatory environments using a case study. The results from this study highlight LCA methodology choices that cause high variability in results and limit comparability among different studies, even among the same biofuel pathway, and recommendations are provided for improvement.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Heath, G.; Burkhardt, J.; Turchi, C.
2012-10-01
Life cycle assessment (LCA) is recognized as a useful analytical approach for quantifying environmental impacts of renewable energy technologies, including concentrating solar power (CSP). An LCA accounts for impacts from all stages in the development, operation, and decommissioning of a CSP plant, including such upstream stages as the extraction of raw materials used in system components, manufacturing of those components, and construction of the plant. The National Renewable Energy Laboratory is conducting a series of LCA studies for various CSP technologies. This paper contributes to a thorough LCA of a 100 MWnet molten salt power tower CSP plant by estimatingmore » the environmental impacts resulting from the manufacture of heliostats. Three life cycle metrics are evaluated: greenhouse gas emissions, water consumption, and cumulative energy demand. The heliostat under consideration (the 148 m2 Advanced Thermal Systems heliostat) emits 5,300 kg CO2eq, consumes 274 m3 of water, and requires 159,000 MJeq during its manufacture. Future work will incorporate the results from this study into the LCA model used to estimate the life cycle impacts of the entire 100 MWnet power tower CSP plant.« less
Geometric quadratic stochastic operator on countable infinite set
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ganikhodjaev, Nasir; Hamzah, Nur Zatul Akmar
2015-02-03
In this paper we construct the family of Geometric quadratic stochastic operators defined on the countable sample space of nonnegative integers and investigate their trajectory behavior. Such operators can be reinterpreted in terms of of evolutionary operator of free population. We show that Geometric quadratic stochastic operators are regular transformations.
A Stochastic Diffusion Process for the Dirichlet Distribution
Bakosi, J.; Ristorcelli, J. R.
2013-03-01
The method of potential solutions of Fokker-Planck equations is used to develop a transport equation for the joint probability ofNcoupled stochastic variables with the Dirichlet distribution as its asymptotic solution. To ensure a bounded sample space, a coupled nonlinear diffusion process is required: the Wiener processes in the equivalent system of stochastic differential equations are multiplicative with coefficients dependent on all the stochastic variables. Individual samples of a discrete ensemble, obtained from the stochastic process, satisfy a unit-sum constraint at all times. The process may be used to represent realizations of a fluctuating ensemble ofNvariables subject to a conservation principle.more » Similar to the multivariate Wright-Fisher process, whose invariant is also Dirichlet, the univariate case yields a process whose invariant is the beta distribution. As a test of the results, Monte Carlo simulations are used to evolve numerical ensembles toward the invariant Dirichlet distribution.« less
Nakajima, Masashi; Hiraoka, Takahiro; Hirohara, Yoko; Oshika, Tetsuro; Mihashi, Toshifumi
2015-01-01
Several researchers studied the longitudinal chromatic aberration (LCA) of the human eye and observed that it does not change due to age. We measured the LCA of 45 subjects’ normal right eyes at three distinct wavelengths (561, 690, and 840 nm) using a Hartmann–Shack wavefront aberrometer (HSWA) while consecutively switching between three light sources for wavefront sensing. We confirmed that the LCA of the human eye does not change due to age between 22 and 57 years. PMID:26203391
ERIC Educational Resources Information Center
Garnett, Bernice R.; Masyn, Katherine E.; Austin, S. Bryn; Williams, David R.; Viswanath, Kasisomayajula
2015-01-01
Background: We used a latent class analysis (LCA) to characterize coping styles of urban youth and examined if coping styles moderated the association between experiencing discrimination and bullying and depressive symptoms. Methods: The data come from the 2006 Boston Youth Survey, where students were asked to select 2 behaviors they do most often…
Haire, Shannon E; Aleman, Tomas S; Cideciyan, Artur V; Sokal, Izabel; Palczewski, Krzysztof; Jacobson, Samuel G; Semple-Rowland, Susan L
2006-01-01
Background Leber congenital amaurosis (LCA) is a genetically heterogeneous group of retinal diseases that cause congenital blindness in infants and children. Mutations in the GUCY2D gene that encodes retinal guanylate cyclase–1 (retGC1) were the first to be linked to this disease group (LCA type 1 [LCA1]) and account for 10%–20% of LCA cases. These mutations disrupt synthesis of cGMP in photoreceptor cells, a key second messenger required for function of these cells. The GUCY1*B chicken, which carries a null mutation in the retGC1 gene, is blind at hatching and serves as an animal model for the study of LCA1 pathology and potential treatments in humans. Methods and Findings A lentivirus-based gene transfer vector carrying the GUCY2D gene was developed and injected into early-stage GUCY1*B embryos to determine if photoreceptor function and sight could be restored to these animals. Like human LCA1, the avian disease shows early-onset blindness, but there is a window of opportunity for intervention. In both diseases there is a period of photoreceptor cell dysfunction that precedes retinal degeneration. Of seven treated animals, six exhibited sight as evidenced by robust optokinetic and volitional visual behaviors. Electroretinographic responses, absent in untreated animals, were partially restored in treated animals. Morphological analyses indicated there was slowing of the retinal degeneration. Conclusions Blindness associated with loss of function of retGC1 in the GUCY1*B avian model of LCA1 can be reversed using viral vector-mediated gene transfer. Furthermore, this reversal can be achieved by restoring function to a relatively low percentage of retinal photoreceptors. These results represent a first step toward development of gene therapies for one of the more common forms of childhood blindness. PMID:16700630
Kobayashi, Yumi; Peters, Greg M; Ashbolt, Nicholas J; Heimersson, Sara; Svanström, Magdalena; Khan, Stuart J
2015-08-01
Life cycle assessment (LCA) and quantitative risk assessment (QRA) are commonly used to evaluate potential human health impacts associated with proposed or existing infrastructure and products. Each approach has a distinct objective and, consequently, their conclusions may be inconsistent or contradictory. It is proposed that the integration of elements of QRA and LCA may provide a more holistic approach to health impact assessment. Here we examine the possibility of merging LCA assessed human health impacts with quantitative microbial risk assessment (QMRA) for waterborne pathogen impacts, expressed with the common health metric, disability adjusted life years (DALYs). The example of a recent large-scale water recycling project in Sydney, Australia was used to identify and demonstrate the potential advantages and current limitations of this approach. A comparative analysis of two scenarios - with and without the development of this project - was undertaken for this purpose. LCA and QMRA were carried out independently for the two scenarios to compare human health impacts, as measured by DALYs lost per year. LCA results suggested that construction of the project would lead to an increased number of DALYs lost per year, while estimated disease burden resulting from microbial exposures indicated that it would result in the loss of fewer DALYs per year than the alternative scenario. By merging the results of the LCA and QMRA, we demonstrate the advantages in providing a more comprehensive assessment of human disease burden for the two scenarios, in particular, the importance of considering the results of both LCA and QRA in a comparative assessment of decision alternatives to avoid problem shifting. The application of DALYs as a common measure between the two approaches was found to be useful for this purpose. Copyright © 2015 Elsevier Ltd. All rights reserved.
Blengini, Gian Andrea; Fantoni, Moris; Busto, Mirko; Genon, Giuseppe; Zanetti, Maria Chiara
2012-09-01
The paper summarises the main results obtained from two extensive applications of Life Cycle Assessment (LCA) to the integrated municipal solid waste management systems of Torino and Cuneo Districts in northern Italy. Scenarios with substantial differences in terms of amount of waste, percentage of separate collection and options for the disposal of residual waste are used to discuss the credibility and acceptability of the LCA results, which are adversely affected by the large influence of methodological assumptions and the local socio-economic constraints. The use of site-specific data on full scale waste treatment facilities and the adoption of a participatory approach for the definition of the most sensible LCA assumptions are used to assist local public administrators and stakeholders showing them that LCA can be operational to waste management at local scale. Copyright © 2012 Elsevier Ltd. All rights reserved.
Morero, Betzabet; Rodriguez, María B; Campanella, Enrique A
2015-08-01
This work presents a comparison between an environmental impact assessment (EIA) and a life cycle assessment (LCA) using a case study: upgrading of biogas. The upgrading of biogas is studied using three solvents: water, physical solvent and amine. The EIA follows the requirements of the legislation of Santa Fe Province (Argentina), and the LCA follows ISO 14040. The LCA results showed that water produces a minor impact in most of the considered categories whereas the high impact in the process with amines is the result of its high energy consumptions. The positive results obtained in the EIA (mainly associated with the cultural and socioeconomic components) make the project feasible and all the negative impacts can be mitigated by preventive and remedial measures. From the strengths and weaknesses of each tool, it is inferred that the EIA is a procedure that can complement the LCA. Copyright © 2015 Elsevier Ltd. All rights reserved.
A Multilevel, Hierarchical Sampling Technique for Spatially Correlated Random Fields
Osborn, Sarah; Vassilevski, Panayot S.; Villa, Umberto
2017-10-26
In this paper, we propose an alternative method to generate samples of a spatially correlated random field with applications to large-scale problems for forward propagation of uncertainty. A classical approach for generating these samples is the Karhunen--Loève (KL) decomposition. However, the KL expansion requires solving a dense eigenvalue problem and is therefore computationally infeasible for large-scale problems. Sampling methods based on stochastic partial differential equations provide a highly scalable way to sample Gaussian fields, but the resulting parametrization is mesh dependent. We propose a multilevel decomposition of the stochastic field to allow for scalable, hierarchical sampling based on solving amore » mixed finite element formulation of a stochastic reaction-diffusion equation with a random, white noise source function. Lastly, numerical experiments are presented to demonstrate the scalability of the sampling method as well as numerical results of multilevel Monte Carlo simulations for a subsurface porous media flow application using the proposed sampling method.« less
A Multilevel, Hierarchical Sampling Technique for Spatially Correlated Random Fields
DOE Office of Scientific and Technical Information (OSTI.GOV)
Osborn, Sarah; Vassilevski, Panayot S.; Villa, Umberto
In this paper, we propose an alternative method to generate samples of a spatially correlated random field with applications to large-scale problems for forward propagation of uncertainty. A classical approach for generating these samples is the Karhunen--Loève (KL) decomposition. However, the KL expansion requires solving a dense eigenvalue problem and is therefore computationally infeasible for large-scale problems. Sampling methods based on stochastic partial differential equations provide a highly scalable way to sample Gaussian fields, but the resulting parametrization is mesh dependent. We propose a multilevel decomposition of the stochastic field to allow for scalable, hierarchical sampling based on solving amore » mixed finite element formulation of a stochastic reaction-diffusion equation with a random, white noise source function. Lastly, numerical experiments are presented to demonstrate the scalability of the sampling method as well as numerical results of multilevel Monte Carlo simulations for a subsurface porous media flow application using the proposed sampling method.« less
Lanza, Stephanie T.; Coffman, Donna L.
2013-01-01
Prevention scientists use latent class analysis (LCA) with increasing frequency to characterize complex behavior patterns and profiles of risk. Often, the most important research questions in these studies involve establishing characteristics that predict membership in the latent classes, thus describing the composition of the subgroups and suggesting possible points of intervention. More recently, prevention scientists have begun to adopt modern methods for drawing causal inference from observational data because of the bias that can be introduced by confounders. This same issue of confounding exists in any analysis of observational data, including prediction of latent class membership. This study demonstrates a straightforward approach to causal inference in LCA that builds on propensity score methods. We demonstrate this approach by examining the causal effect of early sex on subsequent delinquency latent classes using data from 1,890 adolescents in 11th and 12th grade from wave I of the National Longitudinal Study of Adolescent Health. Prior to the statistical adjustment for potential confounders, early sex was significantly associated with delinquency latent class membership for both genders (p=0.02). However, the propensity score adjusted analysis indicated no evidence for a causal effect of early sex on delinquency class membership (p=0.76) for either gender. Sample R and SAS code is included in an Appendix in the ESM so that prevention scientists may adopt this approach to causal inference in LCA in their own work. PMID:23839479
Butera, Nicole M; Lanza, Stephanie T; Coffman, Donna L
2014-06-01
Prevention scientists use latent class analysis (LCA) with increasing frequency to characterize complex behavior patterns and profiles of risk. Often, the most important research questions in these studies involve establishing characteristics that predict membership in the latent classes, thus describing the composition of the subgroups and suggesting possible points of intervention. More recently, prevention scientists have begun to adopt modern methods for drawing causal inference from observational data because of the bias that can be introduced by confounders. This same issue of confounding exists in any analysis of observational data, including prediction of latent class membership. This study demonstrates a straightforward approach to causal inference in LCA that builds on propensity score methods. We demonstrate this approach by examining the causal effect of early sex on subsequent delinquency latent classes using data from 1,890 adolescents in 11th and 12th grade from wave I of the National Longitudinal Study of Adolescent Health. Prior to the statistical adjustment for potential confounders, early sex was significantly associated with delinquency latent class membership for both genders (p = 0.02). However, the propensity score adjusted analysis indicated no evidence for a causal effect of early sex on delinquency class membership (p = 0.76) for either gender. Sample R and SAS code is included in an Appendix in the ESM so that prevention scientists may adopt this approach to causal inference in LCA in their own work.
Assessing performance and validating finite element simulations using probabilistic knowledge
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dolin, Ronald M.; Rodriguez, E. A.
Two probabilistic approaches for assessing performance are presented. The first approach assesses probability of failure by simultaneously modeling all likely events. The probability each event causes failure along with the event's likelihood of occurrence contribute to the overall probability of failure. The second assessment method is based on stochastic sampling using an influence diagram. Latin-hypercube sampling is used to stochastically assess events. The overall probability of failure is taken as the maximum probability of failure of all the events. The Likelihood of Occurrence simulation suggests failure does not occur while the Stochastic Sampling approach predicts failure. The Likelihood of Occurrencemore » results are used to validate finite element predictions.« less
Wang, Shi-Yuan; Zhang, Qi; Zhang, Xiang; Zhao, Pei-Quan
2016-01-01
AIM To make a comprehensive analysis of the potential pathogenic genes related with Leber congenital amaurosis (LCA) in Chinese. METHODS LCA subjects and their families were retrospectively collected from 2013 to 2015. Firstly, whole-exome sequencing was performed in patients who had underwent gene mutation screening with nothing found, and then homozygous sites was selected, candidate sites were annotated, and pathogenic analysis was conducted using softwares including Sorting Tolerant from Intolerant (SIFT), Polyphen-2, Mutation assessor, Condel, and Functional Analysis through Hidden Markov Models (FATHMM). Furthermore, Gene Ontology function and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analyses of pathogenic genes were performed followed by co-segregation analysis using Fisher exact Test. Sanger sequencing was used to validate single-nucleotide variations (SNVs). Expanded verification was performed in the rest patients. RESULTS Totally 51 LCA families with 53 patients and 24 family members were recruited. A total of 104 SNVs (66 LCA-related genes and 15 co-segregated genes) were submitted for expand verification. The frequencies of homozygous mutation of KRT12 and CYP1A1 were simultaneously observed in 3 families. Enrichment analysis showed that the potential pathogenic genes were mainly enriched in functions related to cell adhesion, biological adhesion, retinoid metabolic process, and eye development biological adhesion. Additionally, WFS1 and STAU2 had the highest homozygous frequencies. CONCLUSION LCA is a highly heterogeneous disease. Mutations in KRT12, CYP1A1, WFS1, and STAU2 may be involved in the development of LCA. PMID:27672588
Zhang, Guo-Qiang; Xing, Guangming; Cui, Licong
2018-04-01
One of the basic challenges in developing structural methods for systematic audition on the quality of biomedical ontologies is the computational cost usually involved in exhaustive sub-graph analysis. We introduce ANT-LCA, a new algorithm for computing all non-trivial lowest common ancestors (LCA) of each pair of concepts in the hierarchical order induced by an ontology. The computation of LCA is a fundamental step for non-lattice approach for ontology quality assurance. Distinct from existing approaches, ANT-LCA only computes LCAs for non-trivial pairs, those having at least one common ancestor. To skip all trivial pairs that may be of no practical interest, ANT-LCA employs a simple but innovative algorithmic strategy combining topological order and dynamic programming to keep track of non-trivial pairs. We provide correctness proofs and demonstrate a substantial reduction in computational time for two largest biomedical ontologies: SNOMED CT and Gene Ontology (GO). ANT-LCA achieved an average computation time of 30 and 3 sec per version for SNOMED CT and GO, respectively, about 2 orders of magnitude faster than the best known approaches. Our algorithm overcomes a fundamental computational barrier in sub-graph based structural analysis of large ontological systems. It enables the implementation of a new breed of structural auditing methods that not only identifies potential problematic areas, but also automatically suggests changes to fix the issues. Such structural auditing methods can lead to more effective tools supporting ontology quality assurance work. Copyright © 2018 Elsevier Inc. All rights reserved.
Zhao, Xinyue; Yang, Jixian; Ma, Fang
2018-02-01
For wastewater-related issues (WRI), life cycle assessment (LCA) is often used to evaluate environmental impacts and derive optimization strategies. To promote the application of LCA for WRI, it is critical to incorporate local impact of water pollutants. Organic pollution, a main type of water pollution, has not been given much consideration in current LCA systems. This paper investigates the necessity of setting a regionalized impact category to reflect the local impact of organic pollution. A case study is conducted concerning an upgraded wastewater treatment plant (WWTP) in China, which is assumed to meet different sewage control strategies. Chemical oxygen demand (COD) is selected to represent the organic pollution and treated as an individual impact category. CML 2002 is used to quantify the environmental impacts of different strategies. Results show that abnormal LCA results are generated with the traditional eutrophication impact category, and after the introduction of COD, more reasonable LCA results are obtained, making the entire comparison of different control strategies more meaningful and compelling. Moreover, BEES, Ecovalue 08, and Chinese factors are adopted here as different weighting methods. Different weighting results exhibited various trade-offs for the increasingly strict control strategies; the results of BEES and Ecovalue08 underlined the potential environmental burden, but the results of Chinese factors only emphasized the local environmental improvement. It is concluded that setting regionalized impact category for organic pollution can make LCA results more reasonable in wastewater treatment, especially in evaluating Chinese cases because of the serious water pollution caused by large quantities of COD emission.
Stochastic, adaptive sampling of information by microvilli in fly photoreceptors.
Song, Zhuoyi; Postma, Marten; Billings, Stephen A; Coca, Daniel; Hardie, Roger C; Juusola, Mikko
2012-08-07
In fly photoreceptors, light is focused onto a photosensitive waveguide, the rhabdomere, consisting of tens of thousands of microvilli. Each microvillus is capable of generating elementary responses, quantum bumps, in response to single photons using a stochastically operating phototransduction cascade. Whereas much is known about the cascade reactions, less is known about how the concerted action of the microvilli population encodes light changes into neural information and how the ultrastructure and biochemical machinery of photoreceptors of flies and other insects evolved in relation to the information sampling and processing they perform. We generated biophysically realistic fly photoreceptor models, which accurately simulate the encoding of visual information. By comparing stochastic simulations with single cell recordings from Drosophila photoreceptors, we show how adaptive sampling by 30,000 microvilli captures the temporal structure of natural contrast changes. Following each bump, individual microvilli are rendered briefly (~100-200 ms) refractory, thereby reducing quantum efficiency with increasing intensity. The refractory period opposes saturation, dynamically and stochastically adjusting availability of microvilli (bump production rate: sample rate), whereas intracellular calcium and voltage adapt bump amplitude and waveform (sample size). These adapting sampling principles result in robust encoding of natural light changes, which both approximates perceptual contrast constancy and enhances novel events under different light conditions, and predict information processing across a range of species with different visual ecologies. These results clarify why fly photoreceptors are structured the way they are and function as they do, linking sensory information to sensory evolution and revealing benefits of stochasticity for neural information processing. Copyright © 2012 Elsevier Ltd. All rights reserved.
Buesing, Lars; Bill, Johannes; Nessler, Bernhard; Maass, Wolfgang
2011-01-01
The organization of computations in networks of spiking neurons in the brain is still largely unknown, in particular in view of the inherently stochastic features of their firing activity and the experimentally observed trial-to-trial variability of neural systems in the brain. In principle there exists a powerful computational framework for stochastic computations, probabilistic inference by sampling, which can explain a large number of macroscopic experimental data in neuroscience and cognitive science. But it has turned out to be surprisingly difficult to create a link between these abstract models for stochastic computations and more detailed models of the dynamics of networks of spiking neurons. Here we create such a link and show that under some conditions the stochastic firing activity of networks of spiking neurons can be interpreted as probabilistic inference via Markov chain Monte Carlo (MCMC) sampling. Since common methods for MCMC sampling in distributed systems, such as Gibbs sampling, are inconsistent with the dynamics of spiking neurons, we introduce a different approach based on non-reversible Markov chains that is able to reflect inherent temporal processes of spiking neuronal activity through a suitable choice of random variables. We propose a neural network model and show by a rigorous theoretical analysis that its neural activity implements MCMC sampling of a given distribution, both for the case of discrete and continuous time. This provides a step towards closing the gap between abstract functional models of cortical computation and more detailed models of networks of spiking neurons. PMID:22096452
Stochastic, Adaptive Sampling of Information by Microvilli in Fly Photoreceptors
Song, Zhuoyi; Postma, Marten; Billings, Stephen A.; Coca, Daniel; Hardie, Roger C.; Juusola, Mikko
2012-01-01
Summary Background In fly photoreceptors, light is focused onto a photosensitive waveguide, the rhabdomere, consisting of tens of thousands of microvilli. Each microvillus is capable of generating elementary responses, quantum bumps, in response to single photons using a stochastically operating phototransduction cascade. Whereas much is known about the cascade reactions, less is known about how the concerted action of the microvilli population encodes light changes into neural information and how the ultrastructure and biochemical machinery of photoreceptors of flies and other insects evolved in relation to the information sampling and processing they perform. Results We generated biophysically realistic fly photoreceptor models, which accurately simulate the encoding of visual information. By comparing stochastic simulations with single cell recordings from Drosophila photoreceptors, we show how adaptive sampling by 30,000 microvilli captures the temporal structure of natural contrast changes. Following each bump, individual microvilli are rendered briefly (∼100–200 ms) refractory, thereby reducing quantum efficiency with increasing intensity. The refractory period opposes saturation, dynamically and stochastically adjusting availability of microvilli (bump production rate: sample rate), whereas intracellular calcium and voltage adapt bump amplitude and waveform (sample size). These adapting sampling principles result in robust encoding of natural light changes, which both approximates perceptual contrast constancy and enhances novel events under different light conditions, and predict information processing across a range of species with different visual ecologies. Conclusions These results clarify why fly photoreceptors are structured the way they are and function as they do, linking sensory information to sensory evolution and revealing benefits of stochasticity for neural information processing. PMID:22704990
Estimating rare events in biochemical systems using conditional sampling.
Sundar, V S
2017-01-28
The paper focuses on development of variance reduction strategies to estimate rare events in biochemical systems. Obtaining this probability using brute force Monte Carlo simulations in conjunction with the stochastic simulation algorithm (Gillespie's method) is computationally prohibitive. To circumvent this, important sampling tools such as the weighted stochastic simulation algorithm and the doubly weighted stochastic simulation algorithm have been proposed. However, these strategies require an additional step of determining the important region to sample from, which is not straightforward for most of the problems. In this paper, we apply the subset simulation method, developed as a variance reduction tool in the context of structural engineering, to the problem of rare event estimation in biochemical systems. The main idea is that the rare event probability is expressed as a product of more frequent conditional probabilities. These conditional probabilities are estimated with high accuracy using Monte Carlo simulations, specifically the Markov chain Monte Carlo method with the modified Metropolis-Hastings algorithm. Generating sample realizations of the state vector using the stochastic simulation algorithm is viewed as mapping the discrete-state continuous-time random process to the standard normal random variable vector. This viewpoint opens up the possibility of applying more sophisticated and efficient sampling schemes developed elsewhere to problems in stochastic chemical kinetics. The results obtained using the subset simulation method are compared with existing variance reduction strategies for a few benchmark problems, and a satisfactory improvement in computational time is demonstrated.
Barber, Jared; Tanase, Roxana; Yotov, Ivan
2016-06-01
Several Kalman filter algorithms are presented for data assimilation and parameter estimation for a nonlinear diffusion model of epithelial cell migration. These include the ensemble Kalman filter with Monte Carlo sampling and a stochastic collocation (SC) Kalman filter with structured sampling. Further, two types of noise are considered -uncorrelated noise resulting in one stochastic dimension for each element of the spatial grid and correlated noise parameterized by the Karhunen-Loeve (KL) expansion resulting in one stochastic dimension for each KL term. The efficiency and accuracy of the four methods are investigated for two cases with synthetic data with and without noise, as well as data from a laboratory experiment. While it is observed that all algorithms perform reasonably well in matching the target solution and estimating the diffusion coefficient and the growth rate, it is illustrated that the algorithms that employ SC and KL expansion are computationally more efficient, as they require fewer ensemble members for comparable accuracy. In the case of SC methods, this is due to improved approximation in stochastic space compared to Monte Carlo sampling. In the case of KL methods, the parameterization of the noise results in a stochastic space of smaller dimension. The most efficient method is the one combining SC and KL expansion. Copyright © 2016 Elsevier Inc. All rights reserved.
Stochastic Synapses Enable Efficient Brain-Inspired Learning Machines.
Neftci, Emre O; Pedroni, Bruno U; Joshi, Siddharth; Al-Shedivat, Maruan; Cauwenberghs, Gert
2016-01-01
Recent studies have shown that synaptic unreliability is a robust and sufficient mechanism for inducing the stochasticity observed in cortex. Here, we introduce Synaptic Sampling Machines (S2Ms), a class of neural network models that uses synaptic stochasticity as a means to Monte Carlo sampling and unsupervised learning. Similar to the original formulation of Boltzmann machines, these models can be viewed as a stochastic counterpart of Hopfield networks, but where stochasticity is induced by a random mask over the connections. Synaptic stochasticity plays the dual role of an efficient mechanism for sampling, and a regularizer during learning akin to DropConnect. A local synaptic plasticity rule implementing an event-driven form of contrastive divergence enables the learning of generative models in an on-line fashion. S2Ms perform equally well using discrete-timed artificial units (as in Hopfield networks) or continuous-timed leaky integrate and fire neurons. The learned representations are remarkably sparse and robust to reductions in bit precision and synapse pruning: removal of more than 75% of the weakest connections followed by cursory re-learning causes a negligible performance loss on benchmark classification tasks. The spiking neuron-based S2Ms outperform existing spike-based unsupervised learners, while potentially offering substantial advantages in terms of power and complexity, and are thus promising models for on-line learning in brain-inspired hardware.
Stochastic Synapses Enable Efficient Brain-Inspired Learning Machines
Neftci, Emre O.; Pedroni, Bruno U.; Joshi, Siddharth; Al-Shedivat, Maruan; Cauwenberghs, Gert
2016-01-01
Recent studies have shown that synaptic unreliability is a robust and sufficient mechanism for inducing the stochasticity observed in cortex. Here, we introduce Synaptic Sampling Machines (S2Ms), a class of neural network models that uses synaptic stochasticity as a means to Monte Carlo sampling and unsupervised learning. Similar to the original formulation of Boltzmann machines, these models can be viewed as a stochastic counterpart of Hopfield networks, but where stochasticity is induced by a random mask over the connections. Synaptic stochasticity plays the dual role of an efficient mechanism for sampling, and a regularizer during learning akin to DropConnect. A local synaptic plasticity rule implementing an event-driven form of contrastive divergence enables the learning of generative models in an on-line fashion. S2Ms perform equally well using discrete-timed artificial units (as in Hopfield networks) or continuous-timed leaky integrate and fire neurons. The learned representations are remarkably sparse and robust to reductions in bit precision and synapse pruning: removal of more than 75% of the weakest connections followed by cursory re-learning causes a negligible performance loss on benchmark classification tasks. The spiking neuron-based S2Ms outperform existing spike-based unsupervised learners, while potentially offering substantial advantages in terms of power and complexity, and are thus promising models for on-line learning in brain-inspired hardware. PMID:27445650
ANALYZING SHORT CUT METHODS FOR LIFE CYCLE ASSESSMENT INVENTORIES
Work in progress at the U.S. EPA's National Risk Management Research Laboratory is developing methods for quickly, easily, and inexpensively developing Life Cycle Assessment (LCA) inventories. An LCA inventory represents the inputs and outputs from processes, including fuel and ...
Rapid Estimation of Life Cycle Inventory
Many chemical manufacturers and regulators use life cycle assessment (LCA) to manage the sustainability of chemical manufacturing processes. A significant challenge to using LCA, however, is the sheer quantity of data related to energy and material flows that needs to be collecte...
Chromatic aberration, accommodation, and color preference in asthenopia.
Drew, Stefanie A; Borsting, Eric; Stark, Lawrence R; Chase, Chris
2012-07-01
Asthenopia is a common problem associated with near work and reports suggest that colored lenses or overlays may be applied to reduce symptoms. In this study, we examine the relationship between eyestrain, color preferences, and function of the accommodation and vergence system. Specifically, we examine whether symptomatic observers select colors that reduce accommodative demand based on longitudinal chromatic aberration (LCA). Forty-seven undergraduate students participated in this study. Visual discomfort symptoms were assessed using the Conlon survey. A Mark 2 Intuitive Colorimeter was used to obtain optimal colored light preferences. LCA was modeled using the Chromatic Eye and spectral power density data. A comprehensive evaluation of accommodation and vergence was performed following standard procedures. A significant negative correlation (r = -0.51) was found between eyestrain symptoms and the International Commission on Illumination (CIE) v' axis of colors preferences. Additionally, a significant negative correlation (r = -0.31) was found between eyestrain symptoms and LCA accommodation. Two thirds of the participants in the high discomfort group chose colors that decreased accommodative demand. Accommodative amplitude and vergence facility also correlated with LCA, accounting for 25% of the variance. The color preferences of individuals are systematically influenced by the functioning of their accommodation and vergence systems with increased symptomatology resulting in color selections that reduce LCA accommodative stimulus demand.
Jiang, Dong; Hao, Mengmeng; Wang, Qiao; Huang, Yaohuan; Fu, Xinyu
2014-01-01
The main purpose for developing biofuel is to reduce GHG (greenhouse gas) emissions, but the comprehensive environmental impact of such fuels is not clear. Life cycle analysis (LCA), as a complete comprehensive analysis method, has been widely used in bioenergy assessment studies. Great efforts have been directed toward establishing an efficient method for comprehensively estimating the greenhouse gas (GHG) emission reduction potential from the large-scale cultivation of energy plants by combining LCA with ecosystem/biogeochemical process models. LCA presents a general framework for evaluating the energy consumption and GHG emission from energy crop planting, yield acquisition, production, product use, and postprocessing. Meanwhile, ecosystem/biogeochemical process models are adopted to simulate the fluxes and storage of energy, water, carbon, and nitrogen in the soil-plant (energy crops) soil continuum. Although clear progress has been made in recent years, some problems still exist in current studies and should be addressed. This paper reviews the state-of-the-art method for estimating GHG emission reduction through developing energy crops and introduces in detail a new approach for assessing GHG emission reduction by combining LCA with biogeochemical process models. The main achievements of this study along with the problems in current studies are described and discussed. PMID:25045736
The basics of least cost analysis for archaeological applications
DOE Office of Scientific and Technical Information (OSTI.GOV)
White, Devin Alan
Here we report that Least Cost Analysis (LCA) is a geospatially focused quantitative approach that can help archaeologists better understand how people may have moved across a landscape. At its core is the assumption that humans make decisions about movement as fully rational actors with complete knowledge of the landscape, attempting to minimize the cost of that movement as they travel from one location to another. LCA is most often used to construct a small number of hypothetical routes between locations of interest and, when used effectively, can even lead to the creation of entire transportation networks. Desktop GIS softwaremore » packages, both commercial and open source, make running LCA relatively straightforward, but that does not necessarily mean that the output is informative or accurate. The following tutorial is designed to expose the reader to the foundational steps required to complete an LCA workflow, along with the scientific rationale behind each step and how to avoid potential pitfalls that one might run into along the way. Finally, relevant literature is cited throughout the tutorial in order to provide context for the technical methods that underpin available tools, to suggest various ways that LCA can be used to solve archaeological problems, and to show the art of the possible.« less
LCA to choose among alternative design solutions: the case study of a new Italian incineration line.
Scipioni, A; Mazzi, A; Niero, M; Boatto, T
2009-09-01
At international level LCA is being increasingly used to objectively evaluate the performances of different Municipal Solid Waste (MSW) management solutions. One of the more important waste management options concerns MSW incineration. LCA is usually applied to existing incineration plants. In this study LCA methodology was applied to a new Italian incineration line, to facilitate the prediction, during the design phase, of its potential environmental impacts in terms of damage to human health, ecosystem quality and consumption of resources. The aim of the study was to analyse three different design alternatives: an incineration system with dry flue gas cleaning (without- and with-energy recovery) and one with wet flue gas cleaning. The last two technological solutions both incorporating facilities for energy recovery were compared. From the results of the study, the system with energy recovery and dry flue gas cleaning revealed lower environmental impacts in relation to the ecosystem quality. As LCA results are greatly affected by uncertainties of different types, the second part of the work provides for an uncertainty analysis aimed at detecting the extent output data from life cycle analysis are influenced by uncertainty of input data, and employs both qualitative (pedigree matrix) and quantitative methods (Monte Carlo analysis).
The basics of least cost analysis for archaeological applications
White, Devin Alan
2015-11-01
Here we report that Least Cost Analysis (LCA) is a geospatially focused quantitative approach that can help archaeologists better understand how people may have moved across a landscape. At its core is the assumption that humans make decisions about movement as fully rational actors with complete knowledge of the landscape, attempting to minimize the cost of that movement as they travel from one location to another. LCA is most often used to construct a small number of hypothetical routes between locations of interest and, when used effectively, can even lead to the creation of entire transportation networks. Desktop GIS softwaremore » packages, both commercial and open source, make running LCA relatively straightforward, but that does not necessarily mean that the output is informative or accurate. The following tutorial is designed to expose the reader to the foundational steps required to complete an LCA workflow, along with the scientific rationale behind each step and how to avoid potential pitfalls that one might run into along the way. Finally, relevant literature is cited throughout the tutorial in order to provide context for the technical methods that underpin available tools, to suggest various ways that LCA can be used to solve archaeological problems, and to show the art of the possible.« less
Park, Andrea M; Paniello, Randal C
2016-09-01
To investigate the efficacy of a novel adductor muscle-releasing technique designed to decrease the force of vocal fold adduction, as a potential surgical therapy for patients with adductor spasmodic dysphonia (ADSD). Experimental animal study. A canine laryngeal model was used to assess the acute and sustained efficacy of a lateral cricoarytenoid (LCA) muscle release. A total of 34 canine hemilaryngeal preparations were divided among 7 experimental groups. The LCA muscle was separated from its cricoid cartilage origin via an open, anterior, submucosal approach. The laryngeal adductory pressures (LAP) were assessed pre- and post-muscle release via direct recurrent laryngeal nerve stimulation. Measurements were repeated at 1.5, 3, or 6 months postoperatively. Another study evaluated release of the thyroarytenoid (TA) muscle from its thyroid cartilage origin. Releasing the LCA muscle demonstrated a significant decrease in LAP acutely and was maintained at all 3 time points with the aid of a barrier (P < .05). Without the barrier, the LCA muscle reattached to the cricoid. Acute release of the TA muscle did not significantly decrease the LAP. The proposed LCA release procedure may provide patients with a permanent treatment option for ADSD. However, longer-term studies and human trials are needed. © The Author(s) 2016.
Iribarren, Diego; Vázquez-Rowe, Ian; Moreira, María Teresa; Feijoo, Gumersindo
2010-10-15
The combined application of Life Cycle Assessment and Data Envelopment Analysis has been recently proposed to provide a tool for the comprehensive assessment of the environmental and operational performance of multiple similar entities. Among the acknowledged advantages of LCA+DEA methodology, eco-efficiency verification and avoidance of average inventories are usually highlighted. However, given the novelty of LCA+DEA methods, a high number of additional potentials remain unexplored. In this sense, there are some features that are worth detailing given their wide interest to enhance LCA performance. Emphasis is laid on the improved interpretation of LCA results through the complementary use of DEA with respect to: (i) super-efficiency analysis to facilitate the selection of reference performers, (ii) inter- and intra-assessments of multiple data sets within any specific sector with benchmarking and trend analysis purposes, (iii) integration of an economic dimension in order to enrich sustainability assessments, and (iv) window analysis to evaluate environmental impact efficiency over a certain period of time. Furthermore, the capability of LCA+DEA methodology to be generally implemented in a wide range of scenarios is discussed. These further potentials are explained and demonstrated via the presentation of brief case studies based on real data sets. Copyright © 2010 Elsevier B.V. All rights reserved.
Are functional fillers improving environmental behavior of plastics? A review on LCA studies.
Civancik-Uslu, Didem; Ferrer, Laura; Puig, Rita; Fullana-I-Palmer, Pere
2018-06-01
The use of functional fillers can be advantageous in terms of cost reduction and improved properties in plastics. There are many types of fillers used in industry, organic and inorganic, with a wide application area. As a response to the growing concerns about environmental damage that plastics cause, recently fillers have started to be considered as a way to reduce it by decreasing the need for petrochemical resources. Life cycle assessment (LCA) is identified as a proper tool to evaluate potential environmental impacts of products or systems. Therefore, in this study, the literature regarding LCA of plastics with functional fillers was reviewed in order to see if the use of fillers in plastics could be environmentally helpful. It was interesting to find out that environmental impacts of functional fillers in plastics had not been studied too often, especially in the case of inorganic fillers. Therefore, a gap in the literature was identified for the future works. Results of the study showed that, although there were not many and some differences exist among the LCA studies, the use of fillers in plastics industry may help to reduce environmental emissions. In addition, how LCA methodology was applied to these materials was also investigated. Copyright © 2018 Elsevier B.V. All rights reserved.
Ashtari, Manzar; Zhang, Hui; Cook, Philip A.; Cyckowski, Laura L.; Shindler, Kenneth S.; Marshall, Kathleen A.; Aravand, Puya; Vossough, Arastoo; Gee, James C.; Maguire, Albert M.; Baker, Chris I.; Bennett, Jean
2015-01-01
Much of our knowledge of the mechanisms underlying plasticity in the visual cortex in response to visual impairment, vision restoration, and environmental interactions comes from animal studies. We evaluated human brain plasticity in a group of patients with Leber’s congenital amaurosis (LCA), who regained vision through gene therapy. Using non-invasive multimodal neuroimaging methods, we demonstrated that reversing blindness with gene therapy promoted long-term structural plasticity in the visual pathways emanating from the treated retina of LCA patients. The data revealed improvements and normalization along the visual fibers corresponding to the site of retinal injection of the gene therapy vector carrying the therapeutic gene in the treated eye compared to the visual pathway for the untreated eye of LCA patients. After gene therapy, the primary visual pathways (for example, geniculostriate fibers) in the treated retina were similar to those of sighted control subjects, whereas the primary visual pathways of the untreated retina continued to deteriorate. Our results suggest that visual experience, enhanced by gene therapy, may be responsible for the reorganization and maturation of synaptic connectivity in the visual pathways of the treated eye in LCA patients. The interactions between the eye and the brain enabled improved and sustained long-term visual function in patients with LCA after gene therapy. PMID:26180100
A Watershed Scale Life Cycle Assessment Framework for Hydrologic Design
NASA Astrophysics Data System (ADS)
Tavakol-Davani, H.; Tavakol-Davani, PhD, H.; Burian, S. J.
2017-12-01
Sustainable hydrologic design has received attention from researchers with different backgrounds, including hydrologists and sustainability experts, recently. On one hand, hydrologists have been analyzing ways to achieve hydrologic goals through implementation of recent environmentally-friendly approaches, e.g. Green Infrastructure (GI) - without quantifying the life cycle environmental impacts of the infrastructure through the ISO Life Cycle Assessment (LCA) method. On the other hand, sustainability experts have been applying the LCA to study the life cycle impacts of water infrastructure - without considering the important hydrologic aspects through hydrologic and hydraulic (H&H) analysis. In fact, defining proper system elements for a watershed scale urban water sustainability study requires both H&H and LCA specialties, which reveals the necessity of performing an integrated, interdisciplinary study. Therefore, the present study developed a watershed scale coupled H&H-LCA framework to bring the hydrology and sustainability expertise together to contribute moving the current wage definition of sustainable hydrologic design towards onto a globally standard concept. The proposed framework was employed to study GIs for an urban watershed in Toledo, OH. Lastly, uncertainties associated with the proposed method and parameters were analyzed through a robust Monte Carlo simulation using parallel processing. Results indicated the necessity of both hydrologic and LCA components in the design procedure in order to achieve sustainability.
Shao, Pei-Lin; Chiu, Chaw-Chi; Yuen, Chun-Man; Chua, Sarah; Chang, Li-Teh; Sheu, Jiunn-Jye; Sun, Cheuk-Kwan; Wu, Chiung-Jen; Wang, Ching-Jen; Yip, Hon-Kan
2010-01-01
This study investigates the effectiveness of extracorporeal shock wave (ECSW) in ameliorating inflammatory mediator expression and neointimal formation in a rat model of vascular injury. Male Sprague-Dawley rats with left carotid artery (LCA) injury induced by balloon dilatation (BD; group 1) were compared with group 2 [LCA injury plus ECSW-181 (defined as 181 total shocks given in LCA at 0.011 mJ/mm(2)) on day 2 post-LCA injury], and group 3 (normal controls). The rats in each group were further divided into 3 subgroups (n = 6, each) that were sacrificed on postoperative day 3, 7 and 14, respectively. The results demonstrated that, compared to groups 2 and 3, group 1 had significantly increased cellular expression of CD40, interleukin-18, and connexin 43 at each analyzed time point (all p < 0.001). Additionally, LCCA macrophage (CD68) recruitment was substantially increased in group 1 compared to groups 2 and 3 (all p < 0.001). Furthermore, LCA neointimal proliferation and media thickness were markedly higher in group 1 than in groups 2 and 3 on days 7 and 14 post-BD (all p < 0.001). ECSW markedly attenuates inflammatory responses, proliferation of neointima and smooth muscle cells in a rat vascular injury model.
Stochastic and deterministic models for agricultural production networks.
Bai, P; Banks, H T; Dediu, S; Govan, A Y; Last, M; Lloyd, A L; Nguyen, H K; Olufsen, M S; Rempala, G; Slenning, B D
2007-07-01
An approach to modeling the impact of disturbances in an agricultural production network is presented. A stochastic model and its approximate deterministic model for averages over sample paths of the stochastic system are developed. Simulations, sensitivity and generalized sensitivity analyses are given. Finally, it is shown how diseases may be introduced into the network and corresponding simulations are discussed.
Mejlholm, Ole; Bøknæs, Niels; Dalgaard, Paw
2015-02-01
A new stochastic model for the simultaneous growth of Listeria monocytogenes and lactic acid bacteria (LAB) was developed and validated on data from naturally contaminated samples of cold-smoked Greenland halibut (CSGH) and cold-smoked salmon (CSS). During industrial processing these samples were added acetic and/or lactic acids. The stochastic model was developed from an existing deterministic model including the effect of 12 environmental parameters and microbial interaction (O. Mejlholm and P. Dalgaard, Food Microbiology, submitted for publication). Observed maximum population density (MPD) values of L. monocytogenes in naturally contaminated samples of CSGH and CSS were accurately predicted by the stochastic model based on measured variability in product characteristics and storage conditions. Results comparable to those from the stochastic model were obtained, when product characteristics of the least and most preserved sample of CSGH and CSS were used as input for the existing deterministic model. For both modelling approaches, it was shown that lag time and the effect of microbial interaction needs to be included to accurately predict MPD values of L. monocytogenes. Addition of organic acids to CSGH and CSS was confirmed as a suitable mitigation strategy against the risk of growth by L. monocytogenes as both types of products were in compliance with the EU regulation on ready-to-eat foods. Copyright © 2014 Elsevier Ltd. All rights reserved.
Conservative Diffusions: a Constructive Approach to Nelson's Stochastic Mechanics.
NASA Astrophysics Data System (ADS)
Carlen, Eric Anders
In Nelson's stochastic mechanics, quantum phenomena are described in terms of diffusions instead of wave functions; this thesis is a study of that description. We emphasize that we are concerned here with the possibility of describing, as opposed to explaining, quantum phenomena in terms of diffusions. In this direction, the following questions arise: "Do the diffusions of stochastic mechanics--which are formally given by stochastic differential equations with extremely singular coefficients--really exist?" Given that they exist, one can ask, "Do these diffusions have physically reasonable sample path behavior, and can we use information about sample paths to study the behavior of physical systems?" These are the questions we treat in this thesis. In Chapter I we review stochastic mechanics and diffusion theory, using the Guerra-Morato variational principle to establish the connection with the Schroedinger equation. This chapter is largely expository; however, there are some novel features and proofs. In Chapter II we settle the first of the questions raised above. Using PDE methods, we construct the diffusions of stochastic mechanics. Our result is sufficiently general to be of independent mathematical interest. In Chapter III we treat potential scattering in stochastic mechanics and discuss direct probabilistic methods of studying quantum scattering problems. Our results provide a solid "Yes" in answer to the second question raised above.
Kordas, Katarzyna; Ardoino, Graciela; Coffman, Donna L.; Queirolo, Elena I.; Ciccariello, Daniela; Mañay, Nelly; Ettinger, Adrienne S.
2015-01-01
While it is known that toxic metals contribute individually to child cognitive and behavioral deficits, we still know little about the effects of exposure to multiple metals, particularly when exposures are low. We studied the association between children's blood lead and hair arsenic, cadmium, and manganese and their performance on the Bayley Scales of Infant Development III. Ninety-two preschool children (age 13–42 months) from Montevideo, Uruguay, provided a hair sample and 78 had a blood lead level (BLL) measurement. Using latent class analysis (LCA), we identified four groups of exposure based on metal concentrations: (1) low metals, (2) low-to-moderate metals, (3) high lead and cadmium, and (4) high metals. Using the four-group exposure variable as the main predictor, and fitting raw scores on the cognitive, receptive vocabulary, and expressive vocabulary scales as dependent variables, both complete-case and multiple imputation (MI) analyses were conducted. We found no association between multiple-metal exposures and neurodevelopment in covariate-adjusted models. This study demonstrates the use of LCA together with MI to determine patterns of exposure to multiple toxic metals and relate these to child neurodevelopment. However, because the overall study population was small, other studies with larger sample sizes are needed to investigate these associations. PMID:25694786
Liu, Huiying; Lou, Vivian W Q
2017-11-01
Using two waves of panel data from the China Health and Retirement Longitudinal Study, this study prospectively assessed whether four distinct patterns of productive activity engagement would predict depressive symptoms among older adults in urban China two years later. A sample of urban residents aged 60 or above at Wave 1 and who were interviewed in both waves (N = 2398) was used. Latent class analysis (LCA) was conducted to identify distinct patterns of productive activity engagement that occurred within the Wave 1 data. Next, the generalized estimating equations were used to assess whether identified patterns predicted the levels of depressive symptoms measured at Wave 2. Our use of LCA confirmed the existence of four distinct patterns of productive activity engagement among the study sample: Informal Helper/Carer, Working-Caring Engager, Civic Contributor, and Low/Spousal Carer. All of these three patterns exhibited significantly lower levels of depressive symptoms than that of Low/Spousal Carer two years later. Our use of individual-based categorization of productive engagement better captured the reality of older adults performing various productive activities than summative scales of productive activities did and, therefore, provided a more valid clarification of differential well-being outcomes among older adults.
IN LCA INTERNATIONAL CONFERENCE & EXHIBITION ON LIFE-CYCLE ASSESSMENT: TOOLS FOR SUSTAINABILITY
LCA is being developed and applied internationally by corporations, governments, and environmental groups to incorporate environmental concerns into the decision-making process. It is being widely adopted as a means to evaluate commercial systems and develop sustainable solution...
Transportation life cycle assessment (LCA) synthesis : life cycle assessment learning module series.
DOT National Transportation Integrated Search
2015-03-12
The Life Cycle Assessment Learning Module Series is a set of narrated, self-advancing slideshows on : various topics related to environmental life cycle assessment (LCA). This research project produced the first 27 of such modules, which : are freely...
Sourcing Life Cycle Inventory Data
The collection and validation of quality lifecycle inventory (LCI) data can be the most difficult and time-consuming aspect of developing a life cycle assessment (LCA). Large amounts of process and production data are needed to complete the LCI. For many studies, the LCA analyst ...
Incorporating exposure science into life-cycle assessment
Life-cycle assessment (LCA) is used to estimate the potential for environmental damage that may be caused by a product or process, ideally before the product or process begins. LCA includes all of the steps from extracting natural resources through manufacturing through product u...
LIFE CYCLE ASSESSMENT IN THE U.S. EPA
RECENT DEVELOPMENTS SUCH AS THE FEDERAL GOVERNMENT'S GREEN PURCHASING MEASURE ARE STIMULATING NEW INTEREST IN LCA AT THE USEPA. ACTIVITIES UNDERWAY WILL HELP BUYERS MAKE ENVIRONMENTAL PRODUCT CHOICES EASY ACCESS TO LCA DATA, AND PROVIDE A DATABASE/DECISION TOOL FOR MUNICIPAL WAST...
ERIC Educational Resources Information Center
Saldanha, Luis
2016-01-01
This article reports on a classroom teaching experiment that engaged a group of high school students in designing sampling simulations within a computer microworld. The simulation-design activities aimed to foster students' abilities to conceive of contextual situations as stochastic experiments, and to engage them with the logic of hypothesis…
NASA Astrophysics Data System (ADS)
Theissen, Kevin M.; Zinniker, David A.; Moldowan, J. Michael; Dunbar, Robert B.; Rowe, Harold D.
2005-02-01
Our analysis of lipid molecular fossils from a Lake Titicaca (16° S, 69° W) sediment core reveals distinct changes in the ecology of the lake over an ˜25,000-yr period spanning latest Pleistocene to late Holocene time. Previous investigations have shown that over this time period Lake Titicaca was subject to large changes in lake level in response to regional climatic variability. Our results indicate that lake algal populations were greatly affected by the changing physical and chemical conditions in Lake Titicaca. Hydrocarbons are characterized by a combination of odd-numbered, mid- to long-chain (C 21-C 31) normal alkanes and alkenes. During periods when lake level was higher (latest Pleistocene, early Holocene, and late Holocene), the C 21n-alkane, and the C 25 and C 27 alkenes dominate hydrocarbon distributions and indicate contribution from an algal source, potentially the freshwater alga Botryococcus braunii. The C 30 4 α-methyl sterol (dinosterol) increases sharply during the mid-Holocene, suggesting a greatly increased dinoflagellate presence at that time. Long-chain alkenones (LCAs) become significant during the early Holocene and are highly abundant in mid-Holocene samples. There are relatively few published records of LCA detection in lake sediments but their occurrence is geographically widespread (Antarctica, Asia, Europe, North America). Lake Titicaca represents the first South American lake and the first low-latitude lake in which LCAs have been reported. LCA abundance and distribution may be related to the temperature-dependent response of an unidentified algal precursor. Although the LCA unsaturation indices cannot be used to determine absolute Lake Titicaca temperatures, we suspect that the published LCA U37K unsaturation calibrations can be applied to infer relative temperatures for early to mid-Holocene time when LCA concentrations are high. Using these criteria, the U37K unsaturation indices suggest relatively warmer temperatures in the mid-Holocene. In contrast to previous speculation, lipid analysis provides little evidence of a greatly increased presence of aquatic plants during the mid-Holocene. Instead, it appears that a few algal species were dominant in the lake. Based on the dramatic rise in abundances of LCAs and dinosterol during the early to mid-Holocene, we suspect that the algal producers of these compounds rose in response to a combination of physical and chemical changes in the lake. These include temperature, salinity, and alkalinity changes that occurred as lake level dropped sharply during a multi-millennial drought affecting the Central Andean Altiplano.
Life cycle assessment on food waste and its application in China
NASA Astrophysics Data System (ADS)
Gao, Si; Bao, Jingling; Liu, Xiaojie; Stenmarck, Asa
2018-01-01
Food waste causes tremendous problems in terms of environment and economy, twined with big social influence, thus studies on food waste are essential and meanwhile very complicated According to Food and Agriculture Organization of the United Nations (FAO), 1.3 billion ton/year of food are wasted globally, which has a total carbon footprint of 4.4 GtCO2 eq per year with a cost of USD 411 billion. According to statistics, China has roughly 195 million tons food waste per year, which is huge. Life Cycle Assessment (LCA), which is an internationally standardized method by ISO for assessment of product and process, has been applied in food sectors to evaluate the different environmental influence, energy use etc. This paper analyzed some of the LCA application on the different parts of the food supply chain (production, post-harvest handling, the storage and transportation, processing, the retail, and consumption) where food waste is generated and on the food waste disposal stage, looked into what has been studied in the context of China, and gave recommendations for LCA application for Chinese food waste problems: 1) More application of LCA on food waste should be made on the early stage of the food cycle rather than just the kitchen waste; 2) Besides global warming potentials, other environmental influences should be studied more at the same time; 3) Food waste treatment can be studied using LCA broadly considering mixture with other substrates and using different recycling methods; 4) LCA based on a local context with local data/inventory are strongly needed; 5) further more detailed studies to support an elevated food waste management, such as food waste profile can be developed.
Paper waste - recycling, incineration or landfilling? A review of existing life cycle assessments.
Villanueva, A; Wenzel, H
2007-01-01
A review of existing life cycle assessments (LCAs) on paper and cardboard waste has been undertaken. The objectives of the review were threefold. Firstly, to see whether a consistent message comes out of published LCA literature on optimum disposal or recycling solutions for this waste type. Such message has implications for current policy formulation on material recycling and disposal in the EU. Secondly, to identify key methodological issues of paper waste management LCAs, and enlighten the influence of such issues on the conclusions of the LCA studies. Thirdly, in light of the analysis made, to discuss whether it is at all valid to use the LCA methodology in its current development state to guide policy decisions on paper waste. A total of nine LCA studies containing altogether 73 scenarios were selected from a thorough, international literature search. The selected studies are LCAs including comparisons of different management options for waste paper. Despite claims of inconsistency, the LCAs reviewed illustrate the environmental benefits in recycling over incineration or landfill options, for paper and cardboard waste. This broad consensus was found despite differences in geographic location and definitions of the paper recycling/disposal systems studied. A systematic exploration of the LCA studies showed, however, important methodological pitfalls and sources of error, mainly concerning differences in the definition of the system boundaries. Fifteen key assumptions were identified that cover the three paper cycle system areas: raw materials and forestry, paper production, and disposal/recovery. It was found that the outcome of the individual LCA studies largely depended on the choices made in some of these assumptions, most specifically the ones concerning energy use and generation, and forestry.
Cideciyan, Artur V; Jacobson, Samuel G; Beltran, William A; Sumaroka, Alexander; Swider, Malgorzata; Iwabe, Simone; Roman, Alejandro J; Olivares, Melani B; Schwartz, Sharon B; Komáromy, András M; Hauswirth, William W; Aguirre, Gustavo D
2013-02-05
Leber congenital amaurosis (LCA) associated with retinal pigment epithelium-specific protein 65 kDa (RPE65) mutations is a severe hereditary blindness resulting from both dysfunction and degeneration of photoreceptors. Clinical trials with gene augmentation therapy have shown partial reversal of the dysfunction, but the effects on the degeneration are not known. We evaluated the consequences of gene therapy on retinal degeneration in patients with RPE65-LCA and its canine model. In untreated RPE65-LCA patients, there was dysfunction and degeneration of photoreceptors, even at the earliest ages. Examined serially over years, the outer photoreceptor nuclear layer showed progressive thinning. Treated RPE65-LCA showed substantial visual improvement in the short term and no detectable decline from this new level over the long term. However, retinal degeneration continued to progress unabated. In RPE65-mutant dogs, the first one-quarter of their lifespan showed only dysfunction, and there was normal outer photoreceptor nuclear layer thickness retina-wide. Dogs treated during the earlier dysfunction-only stage showed improved visual function and dramatic protection of treated photoreceptors from degeneration when measured 5-11 y later. Dogs treated later during the combined dysfunction and degeneration stage also showed visual function improvement, but photoreceptor loss continued unabated, the same as in human RPE65-LCA. The results suggest that, in RPE65 disease treatment, protection from visual function deterioration cannot be assumed to imply protection from degeneration. The effects of gene augmentation therapy are complex and suggest a need for a combinatorial strategy in RPE65-LCA to not only improve function in the short term but also slow retinal degeneration in the long term.
Life cycle thinking in impact assessment—Current practice and LCA gains
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bidstrup, Morten, E-mail: Bidstrup@plan.aau.dk
It has been advocated that life cycle thinking (LCT) should be applied in impact assessment (IA) to a greater extent, since some development proposals pose a risk of significant impacts throughout the interconnected activities of product systems. Multiple authors have proposed the usage of life cycle assessment (LCA) for such analytical advancement, but little to no research on this tool application has been founded in IA practice so far. The aim of this article is to elaborate further on the gains assigned to application of LCA. The research builds on a review of 85 Danish IA reports, which were analysedmore » for analytical appropriateness and application of LCT. Through a focus on the non-technical summary, the conclusion and the use of specific search words, passages containing LCT were searched for in each IA report. These passages were then analysed with a generic framework. The results reveal that LCT is appropriate for most of the IAs, but that LCA is rarely applied to provide such a perspective. Without LCA, the IAs show mixed performance in regard to LCT. Most IAs do consider the product provision of development proposals, but they rarely relate impacts to this function explicitly. Many IAs do consider downstream impacts, but assessments of upstream, distant impacts are generally absent. It is concluded that multiple analytical gains can be attributed to greater application of LCA in IA practice, though some level of LCT already exists. - Highlights: • Life cycle thinking is appropriate across the types and topics of impact assessment. • Yet, life cycle assessment is rarely used for adding such perspective. • Impact assessment practice does apply some degree of life cycle thinking. • However, application of life cycle assessment could bring analytical gains.« less
The Added Value of Integrating Emergy into LCA
Life Cycle Assessment (LCA) has become a standard procedure to investigate the environmental performance of human-dominated products and processes. It is meant to capture the overall impact of a product or service along its lifetime and supply chain, and it is structured in four ...
LIFE CYCLE DESIGN OF IN-MOLD SURFACING FILM
Since 1990, the NRMRL has been at the forefront in the development of Life Cycle Assessment as a methodology for environmental assessment. In 1994, NRMRL established an LCA Team to organize individual efforts into a comprehensive research program. The LCA Team coordinates work in...
EDITORIAL: THE INTERNATIONAL CONFERENCE ON LIFE CYCLE ASSESSMENT
This is a special issue of Journal of Life Cycle Assessment that includes selected papers from the Internatonal Conference and Exhibition on Life Cycle Assessment (InLCA). In April 2000, the EPA, with co-organizer IERE, held the InLCA conferencethat attracted over 265 attendees (...
EDITORIAL: THE STATUS OF LCA IN THE USA
Life Cycle Assessment (LCA) is alive and well in the USA. Concerns for environmental management, over strict command and control approaches, has led to an increasing presence of the life cycle concept since its initial appearance in the 1970's. In addition, the very reasonablen...
BROAD-BASED ENVIRONMENTAL LIFE CYCLE ASSESSMENT
Pollution prevention through Life Cycle Assessment (LCA) is a departure from evaluating waste management options that look mainly at single issues such as recyclability or reduced toxicity. An LCA is a snapshot in time of inputs and outputs. It can be used as an objective technic...
PRODUCT LIFE-CYCLE ASSESSMENT: INVENTORY GUIDELINES AND PRINCIPLES
The Life Cycle Assessment (LCA) can be used as an objective technical tool to evaluate the environmental consequences of a product, process, or activity holistically, across its entire life cycle. omplete LCA can be viewed as consisting of three complementary components (1) the i...
Communication Apprehension in the Basic Course in Performance of Literature.
ERIC Educational Resources Information Center
Pelias, Mary Hinchcliff; Pelias, Ronald J.
1988-01-01
Examines the narrative accounts of the aesthetic performance experience as related by high communication apprehensives (HCA's) and low communication apprehensives (LCA's). Indicates that while both HCA's and LCA's commonly label themselves as apprehensive about performance, their characterizations of the performance experience differ significantly…
Boszotta, H; Wendrinsky, R; Sauer, G
1988-02-01
The arthroscopic examination of every recent haemarthrosis of the knee, even in cases without clinically obvious instability has increased the number of primary diagnosed ruptures of the LCA in the last years. The most frequent lesion of the LCA was the proximal rupture. The usual methods for the operative treatment of the ruptured LCA require the opening of the knee joint and cause the weakening of hamstrings, with all disadvantages connected with these procedures. Basing on the experiences in arthroscopic surgery of meniscal lesions and the good results of alloplastic augmentation an new method of arthroscopic refixation and augmentation of the torn LCA has been developed. The use of an arthroscopic meniscal stitcher enables anatomically exact reconstruction of the torn ligament through a femoral tunnel. Augmentation by an LAD-band (Kennedy) or Trevira band (Hoechst) allows postoperative functional treatment, avoiding atrophic degeneration of muscles and loss of mobility by immobilisation. Postoperative pain is reduced to a minimum compared to conventional technics. The period of rehabilitation is considerably shortened.
Safety and Efficacy of Gene Transfer for Leber’s Congenital Amaurosis
Maguire, Albert M.; Simonelli, Francesca; Pierce, Eric A.; Pugh, Edward N.; Mingozzi, Federico; Bennicelli, Jeannette; Banfi, Sandro; Marshall, Kathleen A.; Testa, Francesco; Surace, Enrico M.; Rossi, Settimio; Lyubarsky, Arkady; Arruda, Valder R.; Konkle, Barbara; Stone, Edwin; Sun, Junwei; Jacobs, Jonathan; Dell’Osso, Lou; Hertle, Richard; Ma, Jian-xing; Redmond, T. Michael; Zhu, Xiaosong; Hauck, Bernd; Zelenaia, Olga; Shindler, Kenneth S.; Maguire, Maureen G.; Wright, J. Fraser; Volpe, Nicholas J.; McDonnell, Jennifer Wellman; Auricchio, Alberto; High, Katherine A.; Bennett, Jean
2010-01-01
SUMMARY Leber’s congenital amaurosis (LCA) is a group of inherited blinding diseases with onset during childhood. One form of the disease, LCA2, is caused by mutations in the retinal pigment epithelium–specific 65-kDa protein gene (RPE65). We investigated the safety of subretinal delivery of a recombinant adeno-associated virus (AAV) carrying RPE65 complementary DNA (cDNA) (ClinicalTrials.gov number, NCT00516477). Three patients with LCA2 had an acceptable local and systemic adverse-event profile after delivery of AAV2.hRPE65v2. Each patient had a modest improvement in measures of retinal function on subjective tests of visual acuity. In one patient, an asymptomatic macular hole developed, and although the occurrence was considered to be an adverse event, the patient had some return of retinal function. Although the follow-up was very short and normal vision was not achieved, this study provides the basis for further gene therapy studies in patients with LCA. PMID:18441370
An eco-balance of a recycling plant for spent lead-acid batteries.
Salomone, Roberta; Mondello, Fabio; Lanuzza, Francesco; Micali, Giuseppe
2005-02-01
This study applies Life Cycle Assessment (LCA) methodology to present an eco-balance of a recycling plant that treats spent lead-acid batteries. The recycling plant uses pyrometallurgical treatment to obtain lead from spent batteries. The application of LCA methodology (ISO 14040 series) enabled us to assess the potential environmental impacts arising from the recycling plant's operations. Thus, net emissions of greenhouse gases as well as other major environmental consequences were examined and hot spots inside the recycling plant were identified. A sensitivity analysis was also performed on certain variables to evaluate their effect on the LCA study. The LCA of a recycling plant for spent lead-acid batteries presented shows that this methodology allows all of the major environmental consequences associated with lead recycling using the pyrometallurgical process to be examined. The study highlights areas in which environmental improvements are easily achievable by a business, providing a basis for suggestions to minimize the environmental impact of its production phases, improving process and company performance in environmental terms.
BACKWARD ESTIMATION OF STOCHASTIC PROCESSES WITH FAILURE EVENTS AS TIME ORIGINS1
Gary Chan, Kwun Chuen; Wang, Mei-Cheng
2011-01-01
Stochastic processes often exhibit sudden systematic changes in pattern a short time before certain failure events. Examples include increase in medical costs before death and decrease in CD4 counts before AIDS diagnosis. To study such terminal behavior of stochastic processes, a natural and direct way is to align the processes using failure events as time origins. This paper studies backward stochastic processes counting time backward from failure events, and proposes one-sample nonparametric estimation of the mean of backward processes when follow-up is subject to left truncation and right censoring. We will discuss benefits of including prevalent cohort data to enlarge the identifiable region and large sample properties of the proposed estimator with related extensions. A SEER–Medicare linked data set is used to illustrate the proposed methodologies. PMID:21359167
The Three P's: A Tribute to Duane Webster
ERIC Educational Resources Information Center
Band, Jonathan
2009-01-01
Duane Webster's leadership in the area of copyright policy demonstrates three characteristics: perseverance, pragmatism, and partnership. These characteristics are visible in the foundation and operation of the Library Copyright Alliance (LCA). LCA's successful campaign to defeat a legislative initiative in the 110th Congress to increase copyright…
Integrating Emergy into LCA: potential added value and lingering obstacles
Emergy attempts to measure the environmental work required to generate (ecosystem) goods and services that can be used by humans. It is claimed that the use of inventory modelling principles behind the Life Cycle Assessment (LCA) method (European Commission, 2010a) may improve th...
LCACCESS: A U.S. EPA-SPONSORED WEBSITE FOR ENVIRONMENTAL LIFE CYCLE ASSESSMENT INFORMATION
The EPA's Office of Research and Development has initiated a project with the aim of encouraging and supporting the use of life cycle assessments (LCA's) in environmental management. While LCA is being recognized internationally as an appropriate tool for dealing with environmen...
Assessing Resource Intensity and Renewability of Cellulosic Ethanol Technologies using Eco-LCA
Recognizing the contributions of natural resources and the lack of their comprehensive accounting in life cycle assessment (LCA) of cellulosic ethanol, an in-depth analysis of the contribution of natural resources in the life cycle of cellulosic ethanol derived from five differen...
Moderate deviations-based importance sampling for stochastic recursive equations
Dupuis, Paul; Johnson, Dane
2017-11-17
Abstract Subsolutions to the Hamilton–Jacobi–Bellman equation associated with a moderate deviations approximation are used to design importance sampling changes of measure for stochastic recursive equations. Analogous to what has been done for large deviations subsolution-based importance sampling, these schemes are shown to be asymptotically optimal under the moderate deviations scaling. We present various implementations and numerical results to contrast their performance, and also discuss the circumstances under which a moderate deviation scaling might be appropriate.
Moderate deviations-based importance sampling for stochastic recursive equations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dupuis, Paul; Johnson, Dane
Abstract Subsolutions to the Hamilton–Jacobi–Bellman equation associated with a moderate deviations approximation are used to design importance sampling changes of measure for stochastic recursive equations. Analogous to what has been done for large deviations subsolution-based importance sampling, these schemes are shown to be asymptotically optimal under the moderate deviations scaling. We present various implementations and numerical results to contrast their performance, and also discuss the circumstances under which a moderate deviation scaling might be appropriate.
Field to fuel: developing sustainable biorefineries.
Jenkins, Robin; Alles, Carina
2011-06-01
Life-cycle assessment (LCA) can be used as a scientific decision support technique to quantify the environmental implications of various biorefinery process, feedstock, and integration options. The goal of DuPont's integrated corn biorefinery (ICBR) project, a cost-share project with the United States Department of Energy, was to demonstrate the feasibility of a cellulosic ethanol biorefinery concept. DuPont used LCA to guide research and development to the most sustainable cellulosic ethanol biorefinery design in its ICBR project and will continue to apply LCA in support of its ongoing effort with joint venture partners. Cellulosic ethanol is a biofuel which has the potential to provide a sustainable solution to the nation's growing concerns around energy supply and climate change. A successful biorefinery begins with sustainable removal of biomass from the field. Michigan State University (MSU) used LCA to estimate the environmental performance of corn grain, corn stover, and the corn cob portion of the stover, grown under various farming practices for several corn growing locations in the United States Corn Belt. In order to benchmark the future technology options for producing cellulosic ethanol with existing technologies, LCA results for fossil energy consumption and greenhouse gas (GHG) emissions are compared to alternative ethanol processes and conventional gasoline. Preliminary results show that the DuPont ICBR outperforms gasoline and other ethanol technologies in the life-cycle impact categories considered here.
Relationship Between Binocular Summation and Stereoacuity After Strabismus Surgery
KATTAN, Jaffer M.; VELEZ, Federico G.; DEMER, Joseph L.
2016-01-01
Purpose To describe the relationship between binocular summation and stereoacuity after strabismus surgery. Design Prospective Case Series Methods Setting Stein Eye institute, University of California Los Angeles Patient Population Pediatric strabismic patients who underwent strabismus surgery between 2010 and 2015. Observation Procedures Early Treatment Diabetic Retinopathy Study visual acuity, Sloan low-contrast acuity (LCA, 2.5% and 1.25%) and Randot stereoacuity 2 months following surgical correction of strabismus. Main Outcome Measures The relationship between binocular summation, calculated as the difference between the binocular visual acuity score and that of the better eye, and stereoacuity. Results A total of 130 post-operative strabismic patients were studied. The relationship between binocular summation and stereoacuity was studied by Spearman correlation. There were significant correlations between BiS for 2.5% LCA with near and distance stereoacuity (p=0.006 and 0.009). BiS for 1.25% LCA was also significantly correlated with near stereoacuity (p=0.04). Near stereoacuity and BiS for 2.5% and 1.25% LCA were significantly dependent (Pearson Chi Squared, p=0.006 and p=0.026). Patients with stereoacuity demonstrated significantly more BiS in 2.5% LCA of 2.7 (p=0.022) and 3.1 (p=0.014) letters than did those without near or distance stereoacuity, respectively. Conclusions These findings demonstrate that stereopsis and binocular summation are significantly correlated in patients who have undergone surgical correction of strabismus. PMID:26921805
Goldberg, Alexander A; Richard, Vincent R; Kyryakov, Pavlo; Bourque, Simon D; Beach, Adam; Burstein, Michelle T; Glebov, Anastasia; Koupaki, Olivia; Boukh-Viner, Tatiana; Gregg, Christopher; Juneau, Mylène; English, Ann M; Thomas, David Y; Titorenko, Vladimir I
2010-07-01
In chronologically aging yeast, longevity can be extended by administering a caloric restriction (CR) diet or some small molecules. These life-extending interventions target the adaptable target of rapamycin (TOR) and cAMP/protein kinase A (cAMP/PKA) signaling pathways that are under the stringent control of calorie availability. We designed a chemical genetic screen for small molecules that increase the chronological life span of yeast under CR by targeting lipid metabolism and modulating housekeeping longevity pathways that regulate longevity irrespective of the number of available calories. Our screen identifies lithocholic acid (LCA) as one of such molecules. We reveal two mechanisms underlying the life-extending effect of LCA in chronologically aging yeast. One mechanism operates in a calorie availability-independent fashion and involves the LCA-governed modulation of housekeeping longevity assurance pathways that do not overlap with the adaptable TOR and cAMP/PKA pathways. The other mechanism extends yeast longevity under non-CR conditions and consists in LCA-driven unmasking of the previously unknown anti-aging potential of PKA. We provide evidence that LCA modulates housekeeping longevity assurance pathways by suppressing lipid-induced necrosis, attenuating mitochondrial fragmentation, altering oxidation-reduction processes in mitochondria, enhancing resistance to oxidative and thermal stresses, suppressing mitochondria-controlled apoptosis, and enhancing stability of nuclear and mitochondrial DNA.
Collin, Rob WJ; den Hollander, Anneke I; van der Velde-Visser, Saskia D; Bennicelli, Jeannette; Bennett, Jean; Cremers, Frans PM
2012-01-01
Leber congenital amaurosis (LCA) is the most severe form of inherited retinal degeneration, with an onset in the first year of life. The most frequent mutation that causes LCA, present in at least 10% of individuals with LCA from North-American and Northern-European descent, is an intronic mutation in CEP290 that results in the inclusion of an aberrant exon in the CEP290 mRNA. Here, we describe a genetic therapy approach that is based on antisense oligonucleotides (AONs), small RNA molecules that are able to redirect normal splicing of aberrantly processed pre-mRNA. Immortalized lymphoblastoid cells of individuals with LCA homozygously carrying the intronic CEP290 mutation were transfected with several AONs that target the aberrant exon that is incorporated in the mutant CEP290 mRNA. Subsequent RNA isolation and reverse transcription-PCR analysis revealed that a number of AONs were capable of almost fully redirecting normal CEP290 splicing, in a dose-dependent manner. Other AONs however, displayed no effect on CEP290 splicing at all, indicating that the rescue of aberrant CEP290 splicing shows a high degree of sequence specificity. Together, our data show that AON-based therapy is a promising therapeutic approach for CEP290-associated LCA that warrants future research in animal models to develop a cure for this blinding disease. PMID:23343883
Ashtari, Manzar; Zhang, Hui; Cook, Philip A; Cyckowski, Laura L; Shindler, Kenneth S; Marshall, Kathleen A; Aravand, Puya; Vossough, Arastoo; Gee, James C; Maguire, Albert M; Baker, Chris I; Bennett, Jean
2015-07-15
Much of our knowledge of the mechanisms underlying plasticity in the visual cortex in response to visual impairment, vision restoration, and environmental interactions comes from animal studies. We evaluated human brain plasticity in a group of patients with Leber's congenital amaurosis (LCA), who regained vision through gene therapy. Using non-invasive multimodal neuroimaging methods, we demonstrated that reversing blindness with gene therapy promoted long-term structural plasticity in the visual pathways emanating from the treated retina of LCA patients. The data revealed improvements and normalization along the visual fibers corresponding to the site of retinal injection of the gene therapy vector carrying the therapeutic gene in the treated eye compared to the visual pathway for the untreated eye of LCA patients. After gene therapy, the primary visual pathways (for example, geniculostriate fibers) in the treated retina were similar to those of sighted control subjects, whereas the primary visual pathways of the untreated retina continued to deteriorate. Our results suggest that visual experience, enhanced by gene therapy, may be responsible for the reorganization and maturation of synaptic connectivity in the visual pathways of the treated eye in LCA patients. The interactions between the eye and the brain enabled improved and sustained long-term visual function in patients with LCA after gene therapy. Copyright © 2015, American Association for the Advancement of Science.
Ansara, Donna L; Hindin, Michelle J
2010-10-01
There has been an ongoing debate about the extent and nature of gender differences in the experience of intimate partner violence (IPV). Disagreement about the appropriate definition of IPV is central to this debate. This study used latent class analysis (LCA) to map the patterns of physical violence, sexual coercion, psychological abuse and controlling behaviour, and examined whether LCA can better illuminate the gendered nature of this experience than conventional measures of IPV. Data from the 2004 Canadian General Social Survey were analysed, which included 8360 women and 7056 men 15 years of age and over who reported a current or ex-spouse or common-law partner. Results revealed more variation in the patterns of IPV for women than for men. Six classes were found for women, whereas four classes were found for men. Women and men were equally likely to experience less severe acts of physical aggression that were not embedded in a pattern of control. However, only women experienced a severe and chronic pattern of violence and control involving high levels of fear and injury. For women and men, intermediate patterns of violence and control, and patterns describing exclusively non-physical acts of abuse were also found. The results also revealed substantial differences in the IPV subtypes for those reporting about a current versus an ex-partner. These results support the use of LCA in identifying meaningful patterns of IPV and provide a more nuanced understanding of the role of gender than conventional measures. Implications for sampling within IPV research are discussed.
Deleuze, Jory; Nuyens, Filip; Rochat, Lucien; Rothen, Stéphane; Maurage, Pierre; Billieux, Joël
2017-12-01
Background and aims The DSM-5 includes criteria for diagnosing Internet gaming disorder (IGD) that are adapted from substance abuse and widely used in research and clinical contexts, although evidence supporting their validity remains scarce. This study compared online gamers who do or do not endorse IGD criteria regarding self-control-related abilities (impulsivity, inhibitory control, and decision-making), considered the hallmarks of addictive behaviors. Method A double approach was adopted to distinguish pathological from recreational gamers: The first is the classic DSM-5 approach (≥5 criteria required to endorse the IGD diagnosis), and the second consists in using latent class analysis (LCA) for IGD criteria to distinguish gamers' subgroups. We computed comparisons separately for each approach. Ninety-seven volunteer gamers from the community were recruited. Self-reported questionnaires were used to measure demographic- and game-related characteristics, problematic online gaming (with the Problematic Online Gaming Questionnaire), impulsivity (with the UPPS-P Impulsive Behavior Scale), and depression (with the Beck Depression Inventory-II). Experimental tasks were used to measure inhibitory control (Hybrid-Stop Task) and decision-making abilities (Game of Dice Task). Results Thirty-two participants met IGD criteria (33% of the sample), whereas LCA identified two groups of gamers [pathological (35%) and recreational]. Comparisons that used both approaches (DSM-5 and LCA) failed to identify significant differences regarding all constructs except for variables related to actual or problematic gaming behaviors. Discussion The validity of IGD criteria is questioned, mostly with respect to their relevance in distinguishing high engagement from pathological involvement in video games.
Boosting association rule mining in large datasets via Gibbs sampling.
Qian, Guoqi; Rao, Calyampudi Radhakrishna; Sun, Xiaoying; Wu, Yuehua
2016-05-03
Current algorithms for association rule mining from transaction data are mostly deterministic and enumerative. They can be computationally intractable even for mining a dataset containing just a few hundred transaction items, if no action is taken to constrain the search space. In this paper, we develop a Gibbs-sampling-induced stochastic search procedure to randomly sample association rules from the itemset space, and perform rule mining from the reduced transaction dataset generated by the sample. Also a general rule importance measure is proposed to direct the stochastic search so that, as a result of the randomly generated association rules constituting an ergodic Markov chain, the overall most important rules in the itemset space can be uncovered from the reduced dataset with probability 1 in the limit. In the simulation study and a real genomic data example, we show how to boost association rule mining by an integrated use of the stochastic search and the Apriori algorithm.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tuenge, Jason R.; Hollomon, Brad; Dillon, Heather E.
This report covers the third part of a larger U.S. Department of Energy (DOE) project to assess the life-cycle environmental and resource impacts in the manufacturing, transport, use, and disposal of light-emitting diode (LED) lighting products in relation to incumbent lighting technologies. All three reports are available on the DOE website (www.ssl.energy.gov/tech_reports.html). • Part 1: Review of the Life-Cycle Energy Consumption of Incandescent, Compact Fluorescent and LED Lamps; • Part 2: LED Manufacturing and Performance; • Part 3: LED Environmental Testing. Parts 1 and 2 were published in February and June 2012, respectively. The Part 1 report included a summarymore » of the life-cycle assessment (LCA) process and methodology, provided a literature review of more than 25 existing LCA studies of various lamp types, and performed a meta-analysis comparing LED lamps with incandescent and compact fluorescent lamps (CFLs). Drawing from the Part 1 findings, Part 2 performed a more detailed assessment of the LED manufacturing process and used these findings to provide a comparative LCA taking into consideration a wider range of environmental impacts. Both reports concluded that the life-cycle environmental impact of a given lamp is dominated by the energy used during lamp operation—the upstream generation of electricity drives the total environmental footprint of the product. However, a more detailed understanding of end-of-life disposal considerations for LED products has become increasingly important as their installation base has grown. The Part 3 study (reported herein) was undertaken to augment the LCA findings with chemical analysis of a variety of LED, CFL, and incandescent lamps using standard testing procedures. A total of 22 samples, representing 11 different models, were tested to determine whether any of 17 elements were present at levels exceeding California or Federal regulatory thresholds for hazardous waste. Key findings include: • The selected models were generally found to be below thresholds for Federally regulated elements; • All CFLs and LED lamps and most incandescent lamps exceeded California thresholds for Copper; • Most CFL samples exceeded California thresholds for Antimony and Nickel, and half of the LED samples exceeded California thresholds for Zinc; • The greatest contributors were the screw bases, drivers, ballasts, and wires or filaments; • Overall concentrations in LED lamps were comparable to cell phones and other types of electronic devices, and were generally attributable to components other than the internal LED light sources; • Although the life-cycle environmental impact of the LED lamps is favorable when compared to CFLs and incandescent lamps, recycling will likely gain importance as consumer adoption increases. This study was exploratory in nature and was not intended to provide a definitive indication of regulatory compliance for any specific lamp model or technology. Further study would be needed to more broadly characterize the various light source technologies; to more accurately and precisely characterize a specific model; or to determine whether product redesign would be appropriate.« less
Life cycle assessment of Portland cement concrete interstate highway rehabilitation and replacement.
DOT National Transportation Integrated Search
2010-02-01
Life Cycle Assessment (LCA) is a tool that can be used to identify ways to decrease the environmental impact of a product or process and to inform decision makers of the consequences of changes to the product or process. LCA encompasses all aspects o...
A reassessment of life cycle greenhouse gas emissions for soybean biodiesel
USDA-ARS?s Scientific Manuscript database
Since the first comprehensive soybean biodiesel (BD) LCA by the National Renewable Energy Laboratory in 1998, there have been many technological improvements that could change the LCA results. This study updates the GHG emissions for BD using the most current set of agriculture data from the year 20...
Guidance on Data Quality Assessment for Life Cycle Inventory Data
Data quality within Life Cycle Assessment (LCA) is a significant issue for the future support and development of LCA as a decision support tool and its wider adoption within industry. In response to current data quality standards such as the ISO 14000 series, various entities wit...
Building upon previously published life cycle assessment (LCA) methodologies, we conducted an LCA of a commercial rainwater harvesting (RWH) system and compared it to a municipal water supply (MWS) system adapted to Washington, D.C. Eleven life cycle impact assessment (LCIA) indi...
Life Cycle Assessment Software for Product and Process Sustainability Analysis
ERIC Educational Resources Information Center
Vervaeke, Marina
2012-01-01
In recent years, life cycle assessment (LCA), a methodology for assessment of environmental impacts of products and services, has become increasingly important. This methodology is applied by decision makers in industry and policy, product developers, environmental managers, and other non-LCA specialists working on environmental issues in a wide…
US Activities in Making Life Cycle Inventory Data More Available to Users
The demand for LCA studies continues to grow, although, the lack of reliable, transparent Life Cycle Inventory (LCI) data is hampering the wide-spread application of LCA. This paper will present activities related to the development and accessibility of process LCI data in the U...
US Federal LCA Commons Life Cycle Inventory Unit Process Template
The US Federal LCA Commons Life Cycle Inventory Unit Process Template is a multi-sheet Excel template for life cycle inventory data, metadata and other documentation. The template comes as a package that consistent of three parts: (1) the main template itself for life cycle inven...
Product Category Rules Alignment Workshop, October 4, 2011 in Chicago, IL, USA
A workshop on Product Category Rule (PCR) alignment was held as a special session in the LCA XI conference with approximately 120 participants. PCR alignment refers to the process of assuring that PCRs (rules for developing LCA-based claims like EPDs) developed by different parti...
Teaching Green Engineering: The Case of Ethanol Lifecycle Analysis
ERIC Educational Resources Information Center
Vallero, Daniel A.; Braiser, Chris
2008-01-01
Lifecycle assessment (LCA) is a valuable tool in teaching green engineering and has been used to assess biofuels, including ethanol. An undergraduate engineering course at Duke University has integrated LCA with other interactive teaching techniques to enhance awareness and to inform engineering decision making related to societal issues, such as…
NASA Astrophysics Data System (ADS)
Wang, Sheng; Wang, Linshan; Wei, Tengda
2018-04-01
This paper concerns the dynamics of a stochastic predator-prey system with Markovian switching and Lévy noise. First, the existence and uniqueness of global positive solution to the system is proved. Then, by combining stochastic analytical techniques with M-matrix analysis, sufficient conditions of stochastic permanence and extinction are obtained. Furthermore, for the stochastic permanence case, by means of four constants related to the stationary probability distribution of the Markov chain and the parameters of the subsystems, both the superior limit and the inferior limit of the average in time of the sample path of the solution are estimated. Finally, our conclusions are illustrated through an example.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chen, Yi; Jakeman, John; Gittelson, Claude
2015-01-08
In this paper we present a localized polynomial chaos expansion for partial differential equations (PDE) with random inputs. In particular, we focus on time independent linear stochastic problems with high dimensional random inputs, where the traditional polynomial chaos methods, and most of the existing methods, incur prohibitively high simulation cost. Furthermore, the local polynomial chaos method employs a domain decomposition technique to approximate the stochastic solution locally. In each subdomain, a subdomain problem is solved independently and, more importantly, in a much lower dimensional random space. In a postprocesing stage, accurate samples of the original stochastic problems are obtained frommore » the samples of the local solutions by enforcing the correct stochastic structure of the random inputs and the coupling conditions at the interfaces of the subdomains. Overall, the method is able to solve stochastic PDEs in very large dimensions by solving a collection of low dimensional local problems and can be highly efficient. In our paper we present the general mathematical framework of the methodology and use numerical examples to demonstrate the properties of the method.« less
Disentangling the stochastic behavior of complex time series
NASA Astrophysics Data System (ADS)
Anvari, Mehrnaz; Tabar, M. Reza Rahimi; Peinke, Joachim; Lehnertz, Klaus
2016-10-01
Complex systems involving a large number of degrees of freedom, generally exhibit non-stationary dynamics, which can result in either continuous or discontinuous sample paths of the corresponding time series. The latter sample paths may be caused by discontinuous events - or jumps - with some distributed amplitudes, and disentangling effects caused by such jumps from effects caused by normal diffusion processes is a main problem for a detailed understanding of stochastic dynamics of complex systems. Here we introduce a non-parametric method to address this general problem. By means of a stochastic dynamical jump-diffusion modelling, we separate deterministic drift terms from different stochastic behaviors, namely diffusive and jumpy ones, and show that all of the unknown functions and coefficients of this modelling can be derived directly from measured time series. We demonstrate appli- cability of our method to empirical observations by a data-driven inference of the deterministic drift term and of the diffusive and jumpy behavior in brain dynamics from ten epilepsy patients. Particularly these different stochastic behaviors provide extra information that can be regarded valuable for diagnostic purposes.
Koh, Wonryull; Blackwell, Kim T
2011-04-21
Stochastic simulation of reaction-diffusion systems enables the investigation of stochastic events arising from the small numbers and heterogeneous distribution of molecular species in biological cells. Stochastic variations in intracellular microdomains and in diffusional gradients play a significant part in the spatiotemporal activity and behavior of cells. Although an exact stochastic simulation that simulates every individual reaction and diffusion event gives a most accurate trajectory of the system's state over time, it can be too slow for many practical applications. We present an accelerated algorithm for discrete stochastic simulation of reaction-diffusion systems designed to improve the speed of simulation by reducing the number of time-steps required to complete a simulation run. This method is unique in that it employs two strategies that have not been incorporated in existing spatial stochastic simulation algorithms. First, diffusive transfers between neighboring subvolumes are based on concentration gradients. This treatment necessitates sampling of only the net or observed diffusion events from higher to lower concentration gradients rather than sampling all diffusion events regardless of local concentration gradients. Second, we extend the non-negative Poisson tau-leaping method that was originally developed for speeding up nonspatial or homogeneous stochastic simulation algorithms. This method calculates each leap time in a unified step for both reaction and diffusion processes while satisfying the leap condition that the propensities do not change appreciably during the leap and ensuring that leaping does not cause molecular populations to become negative. Numerical results are presented that illustrate the improvement in simulation speed achieved by incorporating these two new strategies.
Environmental Performance of North American Wood Panel Manufacturing
R. Bergman; D. Kaestner; A. Taylor
2015-01-01
Manufacturing building products such as wood panels has environmental impacts, including contributions to climate change. This paper is a compilation of four studies quantifying these impacts using the life-cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...
Life cycle impacts of North American wood panel Manufacturing
Richard Bergman; D. Kaestner; A. M. Taylor
2016-01-01
Manufacturing building products such as wood panels impacts the environment, including contributing to climate change. This study is a compilation of four studies quantifying these impacts using the life cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...
Classes in the Balance: Latent Class Analysis and the Balance Scale Task
ERIC Educational Resources Information Center
Boom, Jan; ter Laak, Jan
2007-01-01
Latent class analysis (LCA) has been successfully applied to tasks measuring higher cognitive functioning, suggesting the existence of distinct strategies used in such tasks. With LCA it became possible to classify post hoc. This important step forward in modeling and analyzing cognitive strategies is relevant to the overlapping waves model for…
Introduction to Latent Class Analysis with Applications
ERIC Educational Resources Information Center
Porcu, Mariano; Giambona, Francesca
2017-01-01
Latent class analysis (LCA) is a statistical method used to group individuals (cases, units) into classes (categories) of an unobserved (latent) variable on the basis of the responses made on a set of nominal, ordinal, or continuous observed variables. In this article, we introduce LCA in order to demonstrate its usefulness to early adolescence…
Developing a Benchmark Tool for Sustainable Consumption: An Iterative Process
ERIC Educational Resources Information Center
Heiskanen, E.; Timonen, P.; Nissinen, A.; Gronroos, J.; Honkanen, A.; Katajajuuri, J. -M.; Kettunen, J.; Kurppa, S.; Makinen, T.; Seppala, J.; Silvenius, F.; Virtanen, Y.; Voutilainen, P.
2007-01-01
This article presents the development process of a consumer-oriented, illustrative benchmarking tool enabling consumers to use the results of environmental life cycle assessment (LCA) to make informed decisions. LCA provides a wealth of information on the environmental impacts of products, but its results are very difficult to present concisely…
Substance use predictors of victimization profiles among homeless youth: a latent class analysis.
Bender, Kimberly; Thompson, Sanna; Ferguson, Kristin; Langenderfer, Lisa
2014-02-01
Although a substantial body of literature demonstrates high prevalence of street victimization among homeless youth, few studies have investigated the existence of victimization classes that differ on the type and frequency of victimization experienced. Nor do we know how substance use patterns relate to victimization classes. Using latent class analysis (LCA), we examined the existence of victimization classes of homeless youth and investigated substance use predictors of class membership utilizing a large purposive sample (N=601) recruited from homeless youth-serving host agencies in three disparate regions of the U.S. Results of the LCA suggest the presence of three distinct victimization profiles - youth fit into a low-victimization class, a witness class, or a high-victimization class. These three victimization classes demonstrated differences in their substance use, including rates of substance abuse/dependence on alcohol and/or drugs. The presence of distinct victimization profiles suggests the need for screening and referral for differential services. Copyright © 2013 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.
Obesity and Cigarette Smoking: Extending the Link to E-cigarette/Vaping Use.
Lanza, H Isabella; Pittman, Patricia; Batshoun, Jennifer
2017-05-01
In recent years, electronic tobacco (e-cigarette/vaping) use among young adults has grown exponentially. Given past research linking obesity and cigarette smoking, assessing whether this relationship extends to electronic tobacco use is warranted. The current study examined weight status as a correlate of substance use patterns reflecting electronic tobacco use. Survey data were collected from a convenience sample of 452 (59% female) undergraduates attending a large, public university during the 2015-2016 academic year. Latent class analysis (LCA) was conducted to identify substance use classes and examine weight status as a covariate of class membership. LCA analyses identified 4 classes: High Substance Use (19%), Risky Alcohol Use (14%), Cigarette/Electronic Tobacco Use (17%), and Low Substance Use (50%). Both obesity status and greater deviation from one's group body mass index (BMI) norm were associated with a higher likelihood of belonging to the Cigarette/Electronic Tobacco Use class. Findings suggest that electronic tobacco use may fit well into previously established relationships between higher weight status and tobacco use. Future research should examine the longitudinal processes and pathways underlying the relationship between weight status and electronic tobacco use.
Banatao, Diosdado R.; Pastine, Stefan J.
2018-01-01
An innovative recycling process for thermoset polymer composites developed by Connora Technologies (Hayward, CA, USA) was studied. The process efficacy has already been tested, and it is currently working at the plant level. The main aspect investigated in the present paper was the environmental impact by means of the Life Cycle Assessment (LCA) method. Because of the need to recycle and recover materials at their end of life, the Connora process creates a great innovation in the market of epoxy composites, as they are notoriously not recyclable. Connora Technologies developed a relatively gentle chemical recycling process that induces the conversion of thermosets into thermoplastics. The LCA demonstrated that low environmental burdens are associated with the process itself and, furthermore, impacts are avoided due to the recovery of the epoxy-composite constituents (fibres and matrix). A carbon fibre (CF) epoxy-composite panel was produced through Vacuum Resin Transfer Moulding (VRTM) and afterwards treated using the Connora recycling process. The LCA results of both the production and the recycling phases are reported. PMID:29495571
Wiedmann, Thomas O; Suh, Sangwon; Feng, Kuishuang; Lenzen, Manfred; Acquaye, Adolf; Scott, Kate; Barrett, John R
2011-07-01
Future energy technologies will be key for a successful reduction of man-made greenhouse gas emissions. With demand for electricity projected to increase significantly in the future, climate policy goals of limiting the effects of global atmospheric warming can only be achieved if power generation processes are profoundly decarbonized. Energy models, however, have ignored the fact that upstream emissions are associated with any energy technology. In this work we explore methodological options for hybrid life cycle assessment (hybrid LCA) to account for the indirect greenhouse gas (GHG) emissions of energy technologies using wind power generation in the UK as a case study. We develop and compare two different approaches using a multiregion input-output modeling framework - Input-Output-based Hybrid LCA and Integrated Hybrid LCA. The latter utilizes the full-sized Ecoinvent process database. We discuss significance and reliability of the results and suggest ways to improve the accuracy of the calculations. The comparison of hybrid LCA methodologies provides valuable insight into the availability and robustness of approaches for informing energy and environmental policy.
Enhanced algorithms for stochastic programming
DOE Office of Scientific and Technical Information (OSTI.GOV)
Krishna, Alamuru S.
1993-09-01
In this dissertation, we present some of the recent advances made in solving two-stage stochastic linear programming problems of large size and complexity. Decomposition and sampling are two fundamental components of techniques to solve stochastic optimization problems. We describe improvements to the current techniques in both these areas. We studied different ways of using importance sampling techniques in the context of Stochastic programming, by varying the choice of approximation functions used in this method. We have concluded that approximating the recourse function by a computationally inexpensive piecewise-linear function is highly efficient. This reduced the problem from finding the mean ofmore » a computationally expensive functions to finding that of a computationally inexpensive function. Then we implemented various variance reduction techniques to estimate the mean of a piecewise-linear function. This method achieved similar variance reductions in orders of magnitude less time than, when we directly applied variance-reduction techniques directly on the given problem. In solving a stochastic linear program, the expected value problem is usually solved before a stochastic solution and also to speed-up the algorithm by making use of the information obtained from the solution of the expected value problem. We have devised a new decomposition scheme to improve the convergence of this algorithm.« less
Śliwińska, Anna; Burchart-Korol, Dorota; Smoliński, Adam
2017-01-01
This paper presents a life cycle assessment (LCA) of greenhouse gas emissions generated through methanol and electricity co-production system based on coal gasification technology. The analysis focuses on polygeneration technologies from which two products are produced, and thus, issues related to an allocation procedure for LCA are addressed in this paper. In the LCA, two methods were used: a 'system expansion' method based on two approaches, the 'avoided burdens approach' and 'direct system enlargement' methods and an 'allocation' method involving proportional partitioning based on physical relationships in a technological process. Cause-effect relationships in the analysed production process were identified, allowing for the identification of allocation factors. The 'system expansion' method involved expanding the analysis to include five additional variants of electricity production technologies in Poland (alternative technologies). This method revealed environmental consequences of implementation for the analysed technologies. It was found that the LCA of polygeneration technologies based on the 'system expansion' method generated a more complete source of information on environmental consequences than the 'allocation' method. The analysis shows that alternative technologies chosen for generating LCA results are crucial. Life cycle assessment was performed for the analysed, reference and variant alternative technologies. Comparative analysis was performed between the analysed technologies of methanol and electricity co-production from coal gasification as well as a reference technology of methanol production from the natural gas reforming process. Copyright © 2016 Elsevier B.V. All rights reserved.
Scott, Ryan P; Cullen, Alison C; Fox-Lent, Cate; Linkov, Igor
2016-10-01
In emergent photovoltaics, nanoscale materials hold promise for optimizing device characteristics; however, the related impacts remain uncertain, resulting in challenges to decisions on strategic investment in technology innovation. We integrate multi-criteria decision analysis (MCDA) and life-cycle assessment (LCA) results (LCA-MCDA) as a method of incorporating values of a hypothetical federal acquisition manager into the assessment of risks and benefits of emerging photovoltaic materials. Specifically, we compare adoption of copper zinc tin sulfide (CZTS) devices with molybdenum back contacts to alternative devices employing graphite or graphene instead of molybdenum. LCA impact results are interpreted alongside benefits of substitution including cost reductions and performance improvements through application of multi-attribute utility theory. To assess the role of uncertainty we apply Monte Carlo simulation and sensitivity analysis. We find that graphene or graphite back contacts outperform molybdenum under most scenarios and assumptions. The use of decision analysis clarifies potential advantages of adopting graphite as a back contact while emphasizing the importance of mitigating conventional impacts of graphene production processes if graphene is used in emerging CZTS devices. Our research further demonstrates that a combination of LCA and MCDA increases the usability of LCA in assessing product sustainability. In particular, this approach identifies the most influential assumptions and data gaps in the analysis and the areas in which either engineering controls or further data collection may be necessary. © 2016 Society for Risk Analysis.
Wang, Xia; Wang, Hui; Sun, Vincent; Tuan, Han-Fang; Keser, Vafa; Wang, Keqing; Ren, Huanan; Lopez, Irma; Zaneveld, Jacques E; Siddiqui, Sorath; Bowles, Stephanie; Khan, Ayesha; Salvo, Jason; Jacobson, Samuel G; Iannaccone, Alessandro; Wang, Feng; Birch, David; Heckenlively, John R; Fishman, Gerald A; Traboulsi, Elias I; Li, Yumei; Wheaton, Dianna; Koenekoop, Robert K; Chen, Rui
2014-01-01
Background Leber congenital amaurosis (LCA) and juvenile retinitis pigmentosa (RP) are inherited retinal diseases that cause early onset severe visual impairment. An accurate molecular diagnosis can refine the clinical diagnosis and allow gene specific treatments. Methods We developed a capture panel that enriches the exonic DNA of 163 known retinal disease genes. Using this panel, we performed targeted next generation sequencing (NGS) for a large cohort of 179 unrelated and prescreened patients with the clinical diagnosis of LCA or juvenile RP. Systematic NGS data analysis, Sanger sequencing validation, and segregation analysis were utilised to identify the pathogenic mutations. Patients were revisited to examine the potential phenotypic ambiguity at the time of initial diagnosis. Results Pathogenic mutations for 72 patients (40%) were identified, including 45 novel mutations. Of these 72 patients, 58 carried mutations in known LCA or juvenile RP genes and exhibited corresponding phenotypes, while 14 carried mutations in retinal disease genes that were not consistent with their initial clinical diagnosis. We revisited patients in the latter case and found that homozygous mutations in PRPH2 can cause LCA/juvenile RP. Guided by the molecular diagnosis, we reclassified the clinical diagnosis in two patients. Conclusions We have identified a novel gene and a large number of novel mutations that are associated with LCA/juvenile RP. Our results highlight the importance of molecular diagnosis as an integral part of clinical diagnosis. PMID:23847139
Refinements in modeling the passive properties of laryngeal soft tissue.
Hunter, Eric J; Titze, Ingo R
2007-07-01
The nonlinear viscoelastic passive properties of three canine intrinsic laryngeal muscles, the lateral cricoarytenoid (LCA), the posterior cricoarytenoid (PCA), and the interarytenoid (IA), were fit to the parameters of a modified Kelvin model. These properties were compared with those of the thyroarytenoid (TA) and cricothyroid (CT) muscles, as well as previously unpublished viscoelastic characteristics of the human vocal ligament. Passive parameters of the modified Kelvin model were summarized for the vocal ligament, mucosa, and all five laryngeal muscles. Results suggest that the LCA, PCA, and IA muscles are functionally different from the TA and CT muscles in their load-bearing capacity. Furthermore, the LCA, PCA, and IA have a much larger stress-strain hysteresis effect than has been previously reported for the TA and CT or the vocal ligament. The variation in this effect suggests that the connective tissue within the TA and CT muscles is somehow similar to the vocal ligament but different from the LCA, PCA, or IA muscles. Further demonstrating the potential significance of grouping tissues in the laryngeal system by functional groups in the laryngeal system was the unique finding that, over their working elongation range, the LCA and PCA were nearly as exponentially stiff as the vocal ligament. This paper was written in conjunction with an online technical report (http://www.ncvs.org/ncvs/library/tech) in which comprehensive muscle data and sensitivity analysis, as well as downloadable data files and computer scripts, are made available.
Kumaran, Neruban; Moore, Anthony T; Weleber, Richard G; Michaelides, Michel
2017-09-01
Leber congenital amaurosis (LCA) and early-onset severe retinal dystrophy (EOSRD) are both genetically and phenotypically heterogeneous, and characterised clinically by severe congenital/early infancy visual loss, nystagmus, amaurotic pupils and markedly reduced/absent full-field electroretinograms. The vast genetic heterogeneity of inherited retinal disease has been established over the last 10 - 20 years, with disease-causing variants identified in 25 genes to date associated with LCA/EOSRD, accounting for 70-80% of cases, with thereby more genes yet to be identified. There is now far greater understanding of the structural and functional associations seen in the various LCA/EOSRD genotypes. Subsequent development/characterisation of LCA/EOSRD animal models has shed light on the underlying pathogenesis and allowed the demonstration of successful rescue with gene replacement therapy and pharmacological intervention in multiple models. These advancements have culminated in more than 12 completed, ongoing and anticipated phase I/II and phase III gene therapy and pharmacological human clinical trials. This review describes the clinical and genetic characteristics of LCA/EOSRD and the differential diagnoses to be considered. We discuss in further detail the diagnostic clinical features, pathophysiology, animal models and human treatment studies and trials, in the more common genetic subtypes and/or those closest to intervention. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
An Integrated Approach to Life Cycle Analysis
NASA Technical Reports Server (NTRS)
Chytka, T. M.; Brown, R. W.; Shih, A. T.; Reeves, J. D.; Dempsey, J. A.
2006-01-01
Life Cycle Analysis (LCA) is the evaluation of the impacts that design decisions have on a system and provides a framework for identifying and evaluating design benefits and burdens associated with the life cycles of space transportation systems from a "cradle-to-grave" approach. Sometimes called life cycle assessment, life cycle approach, or "cradle to grave analysis", it represents a rapidly emerging family of tools and techniques designed to be a decision support methodology and aid in the development of sustainable systems. The implementation of a Life Cycle Analysis can vary and may take many forms; from global system-level uncertainty-centered analysis to the assessment of individualized discriminatory metrics. This paper will focus on a proven LCA methodology developed by the Systems Analysis and Concepts Directorate (SACD) at NASA Langley Research Center to quantify and assess key LCA discriminatory metrics, in particular affordability, reliability, maintainability, and operability. This paper will address issues inherent in Life Cycle Analysis including direct impacts, such as system development cost and crew safety, as well as indirect impacts, which often take the form of coupled metrics (i.e., the cost of system unreliability). Since LCA deals with the analysis of space vehicle system conceptual designs, it is imperative to stress that the goal of LCA is not to arrive at the answer but, rather, to provide important inputs to a broader strategic planning process, allowing the managers to make risk-informed decisions, and increase the likelihood of meeting mission success criteria.
Stochastic Sampling in the IMF of Galactic Open Clusters
NASA Astrophysics Data System (ADS)
Kay, Christina; Hancock, M.; Canalizo, G.; Smith, B. J.; Giroux, M. L.
2010-01-01
We sought observational evidence of the effects of stochastic sampling of the initial mass function by investigating the integrated colors of a sample of Galactic open clusters. In particular we looked for scatter in the integrated (V-K) color as previous research resulted in little scatter in the (U-B) and (B-V) colors. Combining data from WEBDA and 2MASS we determined three different colors for 287 open clusters. Of these clusters, 39 have minimum uncertainties in age and formed a standard set. A plot of the (V-K) color versus age showed much more scatter than the (U-B) versus age. We also divided the sample into two groups based on a lowest luminosity limit which is a function of age and V magnitude. We expected the group of clusters fainter than this limit to show more scatter than the brighter group. Assuming the published ages, we compared the reddening corrected observed colors to those predicted by Starburst99. The presence of stochastic sampling should increase scatter in the distribution of the differences between observed and model colors of the fainter group relative to the brighter group. However, we found that K-S tests cannot rule out that the distribution of color difference for the brighter and fainter sets come from the same parent distribution. This indistinguishabilty may result from uncertainties in the parameters used to define the groups. This result constrains the size of the effects of stochastic sampling of the initial mass function.
Biodiversity impact assessment (BIA+) - methodological framework for screening biodiversity.
Winter, Lisa; Pflugmacher, Stephan; Berger, Markus; Finkbeiner, Matthias
2018-03-01
For the past 20 years, the life cycle assessment (LCA) community has sought to integrate impacts on biodiversity into the LCA framework. However, existing impact assessment methods still fail to do so comprehensively because they quantify only a few impacts related to specific species and regions. This paper proposes a methodological framework that will allow LCA practitioners to assess currently missing impacts on biodiversity on a global scale. Building on existing models that seek to quantify the impacts of human activities on biodiversity, the herein proposed methodological framework consists of 2 components: a habitat factor for 14 major habitat types and the impact on the biodiversity status in those major habitat types. The habitat factor is calculated by means of indicators that characterize each habitat. The biodiversity status depends on parameters from impact categories. The impact functions, relating these different parameters to a given response in the biodiversity status, rely on expert judgments. To ensure the applicability for LCA practitioners, the components of the framework can be regionalized on a country scale for which LCA inventory data is more readily available. The weighting factors for the 14 major habitat types range from 0.63 to 1.82. By means of area weighting of the major habitat types in a country, country-specific weighting factors are calculated. In order to demonstrate the main part of the framework, examples of impact functions are given for the categories "freshwater eutrophication" and "freshwater ecotoxicity" in 1 major habitat type. The results confirm suitability of the methodological framework. The major advantages are the framework's user-friendliness, given that data can be used from LCA databases directly, and the complete inclusion of all levels of biodiversity (genetic, species, and ecosystem). It is applicable for the whole world and a wide range of impact categories. Integr Environ Assess Manag 2018;14:282-297. © 2017 SETAC. © 2017 SETAC.
Protective effect of acetyl-L-carnitine on propofol-induced toxicity in embryonic neural stem cells.
Liu, Fang; Rainosek, Shuo W; Sadovova, Natalya; Fogle, Charles M; Patterson, Tucker A; Hanig, Joseph P; Paule, Merle G; Slikker, William; Wang, Cheng
2014-05-01
Propofol is a widely used general anesthetic. A growing body of data suggests that perinatal exposure to general anesthetics can result in long-term deleterious effects on brain function. In the developing brain there is evidence that general anesthetics can cause cell death, synaptic remodeling, and altered brain cell morphology. Acetyl-L-carnitine (L-Ca), an anti-oxidant dietary supplement, has been reported to prevent neuronal damage from a variety of causes. To evaluate the ability of L-Ca to protect against propofol-induced neuronal toxicity, neural stem cells were isolated from gestational day 14 rat fetuses and on the eighth day in culture were exposed for 24h to propofol at 10, 50, 100, 300 and 600 μM, with or without L-Ca (10 μM). Markers of cellular proliferation, mitochondrial health, cell death/damage and oxidative damage were monitored to determine: (1) the effects of propofol on neural stem cell proliferation; (2) the nature of propofol-induced neurotoxicity; (3) the degree of protection afforded by L-Ca; and (4) to provide information regarding possible mechanisms underlying protection. After propofol exposure at a clinically relevant concentration (50 μM), the number of dividing cells was significantly decreased, oxidative DNA damage was increased and a significant dose-dependent reduction in mitochondrial function/health was observed. No significant effect on lactase dehydrogenase (LDH) release was observed at propofol concentrations up to 100 μM. The oxidative damage at 50 μM propofol was blocked by L-Ca. Thus, clinically relevant concentrations of propofol induce dose-dependent adverse effects on rat embryonic neural stem cells by slowing or stopping cell division/proliferation and causing cellular damage. Elevated levels of 8-oxoguanine suggest enhanced oxidative damage [reactive oxygen species (ROS) generation] and L-Ca effectively blocks at least some of the toxicity of propofol, presumably by scavenging oxidative species and/or reducing their production. Published by Elsevier B.V.
Tecco, Nadia; Baudino, Claudio; Girgenti, Vincenzo; Peano, Cristiana
2016-10-15
In the challenging world of territorial transformations within the agriculture, there is an increasing need for an integrated methodological framework of assessment that is able to reconcile the demand for solutions that are both economically sustainable and contribute to environmental and social improvement. This study aims to assess the introduction of innovation into agro-food systems by combining an environmental life cycle (LCA) assessment and a social life cycle assessment (s-LCA) to support the decision making process of a fruit growers co-op for the adoption of mulching and covering in raspberry farming. LCA and s-LCA have been applied independently under specific consistency requirements, selecting two scenarios to compare the impact with (1) and without (2) the innovation and then combined within a cause-effect chain. The interactions between the environment and socioeconomic components were considered within a nested frameset of business and territorial features. The total emissions from raspberry production in Scenario 1, according to the Global Warming Potential (GWP) Impact Category amounted to 2.2840kg of CO2 eq. In Scenario 2, the impact of production was associated with a GWP of 0.1682kg of CO2 eq. Social repercussions analysis from Scenario 1 compared to Scenario 2 indicate more satisfaction for working conditions and the management of climate risks. The mulching and covering, implemented within a given framework of farm activity, created conditions for the preservation of a model in which raspberry production contributes to landscape protection, the business sustainability of farms and the creation of employment. The combined use of the two methods contributes to the development of a strategy planning due to its ability to deliver, as well as specific analysis at a functional level, a wider framework for assessing the consistency of the impacts related to innovation in raspberry production. Copyright © 2016 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Meyer, Victoria; Saatchi, Sassan; Clark, David B.; Keller, Michael; Vincent, Grégoire; Ferraz, António; Espírito-Santo, Fernando; d'Oliveira, Marcus V. N.; Kaki, Dahlia; Chave, Jérôme
2018-06-01
Large tropical trees store significant amounts of carbon in woody components and their distribution plays an important role in forest carbon stocks and dynamics. Here, we explore the properties of a new lidar-derived index, the large tree canopy area (LCA) defined as the area occupied by canopy above a reference height. We hypothesize that this simple measure of forest structure representing the crown area of large canopy trees could consistently explain the landscape variations in forest volume and aboveground biomass (AGB) across a range of climate and edaphic conditions. To test this hypothesis, we assembled a unique dataset of high-resolution airborne light detection and ranging (lidar) and ground inventory data in nine undisturbed old-growth Neotropical forests, of which four had plots large enough (1 ha) to calibrate our model. We found that the LCA for trees greater than 27 m (˜ 25-30 m) in height and at least 100 m2 crown size in a unit area (1 ha), explains more than 75 % of total forest volume variations, irrespective of the forest biogeographic conditions. When weighted by average wood density of the stand, LCA can be used as an unbiased estimator of AGB across sites (R2 = 0.78, RMSE = 46.02 Mg ha-1, bias = -0.63 Mg ha-1). Unlike other lidar-derived metrics with complex nonlinear relations to biomass, the relationship between LCA and AGB is linear and remains unique across forest types. A comparison with tree inventories across the study sites indicates that LCA correlates best with the crown area (or basal area) of trees with diameter greater than 50 cm. The spatial invariance of the LCA-AGB relationship across the Neotropics suggests a remarkable regularity of forest structure across the landscape and a new technique for systematic monitoring of large trees for their contribution to AGB and changes associated with selective logging, tree mortality and other types of tropical forest disturbance and dynamics.
Wang, Shiyuan; Zhang, Qi; Zhang, Xiang; Wang, Zhaoyang; Zhao, Peiquan
2016-11-01
To study the genotype-phenotype characteristics of Leber congenital amaurosis (LCA) in the Chinese eastern coast Han population. Children with strictly defined LCA with novel mutations of known LCA genes identified by targeted next-generation sequencing (NGS) and a prediction of pathogenicity (in silico) were included in this study (2013-2015). Mutations were confirmed using Sanger sequencing and segregation analysis. The clinical findings were recorded, including visual function, refractive error, fundus changes, and electroretinograms (ERGs). Spectral-domain optical coherence tomography (SD-OCT) examination, fundus fluorescein angiography (FFA), and ultra-wide field scanning laser ophthalmoscopy (UWF SLO) were performed on children when available. A total of 65 patients underwent NGS for mutation screening and 45 patients were identified as carrying known LCA genes. Of these, 36(80 %) children harbored novel mutations, and they were all from the eastern coast of China. A total of 50 novel variants were identified, which covered 15 known LCA genes. GUCY2D (17 %), CEP290 (14 %), NMNAT1 (14 %), AIPL1 (11 %) and RPGRIP1 (11 %) were the five most frequently mutated genes with novel mutations. A total of four (11 %) patients with AIPL1 mutations harbored the same novel mutated allele (c.C241T p.Q81X), which was homozygous in patients 1 and 2. Unusual manifestations were detected in patient 16 who had novel mutations in CRB1 with a dense proliferative membrane adhering to the posterior retina of the right eye with numerous fine glistening crystals spreading over the retina of both eyes. Ten (40 %) of the 25 available patients who underwent SD-OCT showed a normal macular appearance using fundus photography but an abnormal macular structure using OCT imaging, most of whom presented with a thickened fovea with maldevelopment of the inner and outer retinal laminae. There may be a high frequency of AIPL1 novel mutations and a founder mutation of p.Q81X in the Chinese eastern coast Han population. Our findings of specific features in this population broaden the spectrum of novel mutations and the phenotype of LCA with ethnic and regional variations. Fundus multimodality imaging may help guide comprehensive assessments for patients with LCA.
Modular life cycle assessment of municipal solid waste management.
Haupt, M; Kägi, T; Hellweg, S
2018-05-31
Life cycle assessment (LCA) is commonly applied to examine the environmental performance of waste management systems. The system boundaries are, however, often limited to either one tonne of material or to specific waste treatments and are, therefore, lacking a systems perspective. Here, a framework is proposed to assess complete waste management systems based on actual waste flows, assessed with a detailed material flow analysis (MFA) in a modular MFA/LCA approach. The transformation of the MFA into a product-process-matrix facilitates a direct link between MFA and LCA, therefore allowing for the assessment of variations in flows. To allow for an up-to-date and geographically specific assessment, 190 LCA modules were set up based on primary industrial data and the ecoinvent database. The LCA modules show where there have been improvements in different recycling processes over the past years (e.g. for paper recycling) and highlight that, from an environmental perspective, closed-loop recycling is not always preferable to open-loop recycling. In a case study, the Swiss municipal solid waste management system, of which there is already a detailed MFA, was modeled using the new LCA modules and applying the modular MFA/LCA approach. Five different mass flow distribution scenarios for the Swiss municipal solid waste management system were assessed to show the environmental impact of political measures and to test the sensitivity of the results to key parameters. The results of the case study highlight the importance of the dominant fractions in the overall environmental impacts assessment; while the metal fraction has the highest impact on a per kilogram basis, paper, cardboard, glass and mixed municipal solid waste were found to dominate the environmental impacts of the Swiss waste management system due to their mass. The scenarios also highlight the importance of the energy efficiency of municipal solid waste incineration plants and the credits from material substitution as key variables. In countries with advanced waste management systems such as Switzerland, there is limited improvement potential with further increases in recycling rates. In these cases, the focus of political measures should be laid on (i) the utilization of secondary materials in applications where they replace high-impact primary production, and (ii) an increased recovery of energy in waste-to-energy plants. Copyright © 2018. Published by Elsevier Ltd.
Rackauckas, Christopher; Nie, Qing
2017-01-01
Adaptive time-stepping with high-order embedded Runge-Kutta pairs and rejection sampling provides efficient approaches for solving differential equations. While many such methods exist for solving deterministic systems, little progress has been made for stochastic variants. One challenge in developing adaptive methods for stochastic differential equations (SDEs) is the construction of embedded schemes with direct error estimates. We present a new class of embedded stochastic Runge-Kutta (SRK) methods with strong order 1.5 which have a natural embedding of strong order 1.0 methods. This allows for the derivation of an error estimate which requires no additional function evaluations. Next we derive a general method to reject the time steps without losing information about the future Brownian path termed Rejection Sampling with Memory (RSwM). This method utilizes a stack data structure to do rejection sampling, costing only a few floating point calculations. We show numerically that the methods generate statistically-correct and tolerance-controlled solutions. Lastly, we show that this form of adaptivity can be applied to systems of equations, and demonstrate that it solves a stiff biological model 12.28x faster than common fixed timestep algorithms. Our approach only requires the solution to a bridging problem and thus lends itself to natural generalizations beyond SDEs.
Rackauckas, Christopher
2017-01-01
Adaptive time-stepping with high-order embedded Runge-Kutta pairs and rejection sampling provides efficient approaches for solving differential equations. While many such methods exist for solving deterministic systems, little progress has been made for stochastic variants. One challenge in developing adaptive methods for stochastic differential equations (SDEs) is the construction of embedded schemes with direct error estimates. We present a new class of embedded stochastic Runge-Kutta (SRK) methods with strong order 1.5 which have a natural embedding of strong order 1.0 methods. This allows for the derivation of an error estimate which requires no additional function evaluations. Next we derive a general method to reject the time steps without losing information about the future Brownian path termed Rejection Sampling with Memory (RSwM). This method utilizes a stack data structure to do rejection sampling, costing only a few floating point calculations. We show numerically that the methods generate statistically-correct and tolerance-controlled solutions. Lastly, we show that this form of adaptivity can be applied to systems of equations, and demonstrate that it solves a stiff biological model 12.28x faster than common fixed timestep algorithms. Our approach only requires the solution to a bridging problem and thus lends itself to natural generalizations beyond SDEs. PMID:29527134
Meier, Matthias S; Stoessel, Franziska; Jungbluth, Niels; Juraske, Ronnie; Schader, Christian; Stolze, Matthias
2015-02-01
Comprehensive assessment tools are needed that reliably describe environmental impacts of different agricultural systems in order to develop sustainable high yielding agricultural production systems with minimal impacts on the environment. Today, Life Cycle Assessment (LCA) is increasingly used to assess and compare the environmental sustainability of agricultural products from conventional and organic agriculture. However, LCA studies comparing agricultural products from conventional and organic farming systems report a wide variation in the resource efficiency of products from these systems. The studies show that impacts per area farmed land are usually less in organic systems, but related to the quantity produced impacts are often higher. We reviewed 34 comparative LCA studies of organic and conventional agricultural products to analyze whether this result is solely due to the usually lower yields in organic systems or also due to inaccurate modeling within LCA. Comparative LCAs on agricultural products from organic and conventional farming systems often do not adequately differentiate the specific characteristics of the respective farming system in the goal and scope definition and in the inventory analysis. Further, often only a limited number of impact categories are assessed within the impact assessment not allowing for a comprehensive environmental assessment. The most critical points we identified relate to the nitrogen (N) fluxes influencing acidification, eutrophication, and global warming potential, and biodiversity. Usually, N-emissions in LCA inventories of agricultural products are based on model calculations. Modeled N-emissions often do not correspond with the actual amount of N left in the system that may result in potential emissions. Reasons for this may be that N-models are not well adapted to the mode of action of organic fertilizers and that N-emission models often are built on assumptions from conventional agriculture leading to even greater deviances for organic systems between the amount of N calculated by emission models and the actual amount of N available for emissions. Improvements are needed regarding a more precise differentiation between farming systems and regarding the development of N emission models that better represent actual N-fluxes within different systems. We recommend adjusting N- and C-emissions during farmyard manure management and farmyard manure fertilization in plant production to the feed ration provided in the animal production of the respective farming system leading to different N- and C-compositions within the excrement. In the future, more representative background data on organic farming systems (e.g. N content of farmyard manure) should be generated and compiled so as to be available for use within LCA inventories. Finally, we recommend conducting consequential LCA - if possible - when using LCA for policy-making or strategic environmental planning to account for different functions of the analyzed farming systems. Copyright © 2014 Elsevier Ltd. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
D'Elia, M.; Edwards, H. C.; Hu, J.
Previous work has demonstrated that propagating groups of samples, called ensembles, together through forward simulations can dramatically reduce the aggregate cost of sampling-based uncertainty propagation methods [E. Phipps, M. D'Elia, H. C. Edwards, M. Hoemmen, J. Hu, and S. Rajamanickam, SIAM J. Sci. Comput., 39 (2017), pp. C162--C193]. However, critical to the success of this approach when applied to challenging problems of scientific interest is the grouping of samples into ensembles to minimize the total computational work. For example, the total number of linear solver iterations for ensemble systems may be strongly influenced by which samples form the ensemble whenmore » applying iterative linear solvers to parameterized and stochastic linear systems. In this paper we explore sample grouping strategies for local adaptive stochastic collocation methods applied to PDEs with uncertain input data, in particular canonical anisotropic diffusion problems where the diffusion coefficient is modeled by truncated Karhunen--Loève expansions. Finally, we demonstrate that a measure of the total anisotropy of the diffusion coefficient is a good surrogate for the number of linear solver iterations for each sample and therefore provides a simple and effective metric for grouping samples.« less
D'Elia, M.; Edwards, H. C.; Hu, J.; ...
2018-01-18
Previous work has demonstrated that propagating groups of samples, called ensembles, together through forward simulations can dramatically reduce the aggregate cost of sampling-based uncertainty propagation methods [E. Phipps, M. D'Elia, H. C. Edwards, M. Hoemmen, J. Hu, and S. Rajamanickam, SIAM J. Sci. Comput., 39 (2017), pp. C162--C193]. However, critical to the success of this approach when applied to challenging problems of scientific interest is the grouping of samples into ensembles to minimize the total computational work. For example, the total number of linear solver iterations for ensemble systems may be strongly influenced by which samples form the ensemble whenmore » applying iterative linear solvers to parameterized and stochastic linear systems. In this paper we explore sample grouping strategies for local adaptive stochastic collocation methods applied to PDEs with uncertain input data, in particular canonical anisotropic diffusion problems where the diffusion coefficient is modeled by truncated Karhunen--Loève expansions. Finally, we demonstrate that a measure of the total anisotropy of the diffusion coefficient is a good surrogate for the number of linear solver iterations for each sample and therefore provides a simple and effective metric for grouping samples.« less
2010-08-01
a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. a ...SECURITY CLASSIFICATION OF: This study presents a methodology for computing stochastic sensitivities with respect to the design variables, which are the...Random Variables Report Title ABSTRACT This study presents a methodology for computing stochastic sensitivities with respect to the design variables
LCA Study for Pilot Scale Production of Cellulose Nano Crystals (CNC) from Wood Pulp
Hongmei Gu; Richard Reiner; Richard Bergman; Alan Rudie
2015-01-01
Interest in cellulose nanocrystals (CNC)/cellulose nanofibrils (CNF) made from woody biomass has been growing rapidly with close attention from pulp and paper industry, governments, universities, and research institutes. Many new products development with CNCs have been studied intensively. However, little life-cycle analysis (LCA) has been conducted for the...
ERIC Educational Resources Information Center
Henry, Kimberly L.; Muthen, Bengt
2010-01-01
Latent class analysis (LCA) is a statistical method used to identify subtypes of related cases using a set of categorical or continuous observed variables. Traditional LCA assumes that observations are independent. However, multilevel data structures are common in social and behavioral research and alternative strategies are needed. In this…
Water footprinting has emerged as an important approach to assess water use related effects from consumption of goods and services. Assessment methods are proposed by two different communities, the Water Footprint Network (WFN) and the Life Cycle Assessment (LCA) community. The p...
Understand environmental and cost impacts of transitional decentralized MBR systems with sewer mining Assess aerobic MBRs (AeMBR) and anaerobic MBRs (AnMBR) Use LCA and life cycle cost (LCC) analysis to quantify impacts Investigate LCA and LCC performance of MBRs under various re...
Life Cycle Assessment (LCA) is a decision-making tool that accounts for multiple impacts across the life cycle of a product or service. This paper presents a conceptual framework to integrate human health impact assessment with risk screening approaches to extend LCA to include n...
One of the goals of Life-Cycle Assessment (LCA) is to compare the full range of environmental effects assignable to products and services in order to improve processes, support policy and provide a sound “systems-thinking” basis for decision support. How in fact LCA can be incorp...
Park, Mi Jin; Park, Nan Sook; Chiriboga, David A
2018-05-01
This study presents an empirical typology of social activity and its association with the depressive symptoms and self-rated health of community-dwelling older adults (n = 464) in South Korea. Latent class analysis (LCA) was used to classify the types of social activities. Data analyses were conducted using Mplus 7.2 program for LCA and SPSS 22.0 for multiple regression analyses. LCA identified people who fell into one of the four activity groups: Diverse, Community Center/Disengaged, Religion Plus, and Friendship/Leisure. Membership in these four groups predicted differences in depressive symptoms and self-rated health. Results indicate that typologies of social activity could enhance practitioners' understanding of activity patterns and their associations with health and well-being.
Newcomb, Michael E; Ryan, Daniel T; Greene, George J; Garofalo, Robert; Mustanski, Brian
2014-08-01
Young men who have sex with men (YMSM) are substantially more likely to use illicit drugs and other substances compared to their heterosexual peers. Substance use during adolescence has critical implications for long-term physical and mental health, and among YMSM may lead to HIV infection. The goal of the current study was to describe lifetime and past six month prevalence and patterns of substance use across multiple substances in a community sample of racially-diverse YMSM. Participants were 450 YMSM aged 16-20 living in Chicago and surrounding areas who were recruited beginning December, 2009 using a modified form of respondent driven sampling. Analyses were conducted with multivariate logistic regression and latent class analysis (LCA). Prevalence of substance use was high in this sample of majority racial minority YMSM, and only 17.6% reported no substance use during the past six months. Black YMSM had lower prevalence of use of all substances except marijuana compared to White YMSM, while Latino YMSM had lower prevalence of alcohol, marijuana, and club drug use. Bisexual YMSM reported higher prevalence of cigarette smoking, stimulant use, and club drug use compared to gay/mostly gay YMSM but lower numbers of bisexual participants limited the ability to detect statistically significant differences. LCA found that YMSM fell into three general categories of substance users: alcohol and marijuana users, polysubstance users, and low marijuana users. Analyses reveal important group differences in prevalence and patterns of substance use in YMSM that have important implications for intervention. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
A Latent Class Analysis of Heterosexual Young Men’s Masculinities
Masters, N. Tatiana; Beadnell, Blair; Wells, Elizabeth A.; Morrison, Diane M.; Hoppe, Marilyn J.
2015-01-01
Parallel bodies of research have described the diverse and complex ways that men understand and construct their masculine identities (often termed“masculinities”) and, separately, how adherence to traditional notions of masculinity places men at risk for negative sexual and health outcomes. The goal of this analysis was to bring together these two streams of inquiry. Using data from a national, online sample of 555 hetero-sexually active young men, we employed latent class analysis (LCA) to detect patterns of masculine identities based on men’s endorsement of behavioral and attitudinal indicators of“dominant” masculinity, including sexual attitudes and behaviors. LCA identified four conceptually distinct masculine identity profiles. Twogroups, termed the Normative and Normative/Male Activities groups, respectively, constituted 88 % of the sample and were characterized by low levels of adherence to attitudes, sexual scripts, and behaviors consistent with“dominant”masculinity, but differed in their levels of engagement in male-oriented activities (e.g., sports teams). Only eight percent of the sample comprised a masculinity profile consistent with “traditional” ideas about masculinity; this group was labeled Misogynistic because of high levels of sexual assault and violence toward female partners. The remaining four percent constituted a Sex-Focused group, characterized by high numbers of sexual partners, but relatively low endorsement of other indicators of traditional masculinity. Follow-up analyses showed a small number of differences across groups on sexual and substance use health indicators. Findings have implications for sexual and behavioral health interventions and suggest that very few young men embody or endorse rigidly traditional forms of masculinity. PMID:26496914
The categorisation of dysthymic disorder: can its constituents be meaningfully apportioned?
Rhebergen, Didi; Graham, Rebecca; Hadzi-Pavlovic, Dusan; Stek, Max; Friend, Paul; Barrett, Melissa; Parker, Gordon
2012-12-20
Since its introduction in DSM-III, the validity of dysthymia has been debated. Our objective is to further examine the concept of dysthymia in an outpatient sample, and explore whether its constituents can be meaningfully apportioned. 318 patients attending the Black Dog Institute Depression Clinic were assessed by the Mini-International Neuropsychiatric Interview, and completed several self-report measures, in addition to a clinical assessment by an Institute psychiatrist. The characteristics of patients with major depressive disorder (MDD), dysthymic disorder and double depression were examined. Latent Class Analysis (LCA) and Latent Profile Analysis (LPA) were then conducted with the aim of detecting distinct classes based on depressive symptomatology and personality domains, respectively. Finally, clinicians' formulations of the study patients were examined. Depression groups mainly differed on parameters of severity. Although LCA and LPA analyses indicated the presence of distinct classes, these only moderately correlated with the MINI-diagnosed groups. Finally, there was evidence for considerable heterogeneity within clinicians' formulations of dysthymia. Inadequate sample numbers for various measures limited the power of the LPA and our sample was weighted to patients with a more severe depressive condition which may affect the detection of a distinct 'dysthymic' personality profile. Despite employing a variety of techniques, we were unable to obtain a clear homogeneous picture of dysthymia. Rather, there was evidence for a distinct heterogeneity in clinician-derived diagnoses. These findings allude to the questionable discriminant validity of dysthymia and may encourage future research and discussion on this important topic. Copyright © 2012 Elsevier B.V. All rights reserved.
A Latent Class Analysis of Heterosexual Young Men's Masculinities.
Casey, Erin A; Masters, N Tatiana; Beadnell, Blair; Wells, Elizabeth A; Morrison, Diane M; Hoppe, Marilyn J
2016-07-01
Parallel bodies of research have described the diverse and complex ways that men understand and construct their masculine identities (often termed "masculinities") and, separately, how adherence to traditional notions of masculinity places men at risk for negative sexual and health outcomes. The goal of this analysis was to bring together these two streams of inquiry. Using data from a national, online sample of 555 heterosexually active young men, we employed latent class analysis (LCA) to detect patterns of masculine identities based on men's endorsement of behavioral and attitudinal indicators of "dominant" masculinity, including sexual attitudes and behaviors. LCA identified four conceptually distinct masculine identity profiles. Two groups, termed the Normative and Normative/Male Activities groups, respectively, constituted 88 % of the sample and were characterized by low levels of adherence to attitudes, sexual scripts, and behaviors consistent with "dominant" masculinity, but differed in their levels of engagement in male-oriented activities (e.g., sports teams). Only eight percent of the sample comprised a masculinity profile consistent with "traditional" ideas about masculinity; this group was labeled Misogynistic because of high levels of sexual assault and violence toward female partners. The remaining four percent constituted a Sex-Focused group, characterized by high numbers of sexual partners, but relatively low endorsement of other indicators of traditional masculinity. Follow-up analyses showed a small number of differences across groups on sexual and substance use health indicators. Findings have implications for sexual and behavioral health interventions and suggest that very few young men embody or endorse rigidly traditional forms of masculinity.
RES: Regularized Stochastic BFGS Algorithm
NASA Astrophysics Data System (ADS)
Mokhtari, Aryan; Ribeiro, Alejandro
2014-12-01
RES, a regularized stochastic version of the Broyden-Fletcher-Goldfarb-Shanno (BFGS) quasi-Newton method is proposed to solve convex optimization problems with stochastic objectives. The use of stochastic gradient descent algorithms is widespread, but the number of iterations required to approximate optimal arguments can be prohibitive in high dimensional problems. Application of second order methods, on the other hand, is impracticable because computation of objective function Hessian inverses incurs excessive computational cost. BFGS modifies gradient descent by introducing a Hessian approximation matrix computed from finite gradient differences. RES utilizes stochastic gradients in lieu of deterministic gradients for both, the determination of descent directions and the approximation of the objective function's curvature. Since stochastic gradients can be computed at manageable computational cost RES is realizable and retains the convergence rate advantages of its deterministic counterparts. Convergence results show that lower and upper bounds on the Hessian egeinvalues of the sample functions are sufficient to guarantee convergence to optimal arguments. Numerical experiments showcase reductions in convergence time relative to stochastic gradient descent algorithms and non-regularized stochastic versions of BFGS. An application of RES to the implementation of support vector machines is developed.
Optical EVPA rotations in blazars: testing a stochastic variability model with RoboPol data
NASA Astrophysics Data System (ADS)
Kiehlmann, S.; Blinov, D.; Pearson, T. J.; Liodakis, I.
2017-12-01
We identify rotations of the polarization angle in a sample of blazars observed for three seasons with the RoboPol instrument. A simplistic stochastic variability model is tested against this sample of rotation events. The model is capable of producing samples of rotations with parameters similar to the observed ones, but fails to reproduce the polarization fraction at the same time. Even though we can neither accept nor conclusively reject the model, we point out various aspects of the observations that are fully consistent with a random walk process.
Collin, Simon M; Nikolaus, Stephanie; Heron, Jon; Knoop, Hans; White, Peter D; Crawley, Esther
2016-02-01
Studies have provided evidence of heterogeneity within chronic fatigue syndrome (CFS), but few have used data from large cohorts of CFS patients or replication samples. 29 UK secondary-care CFS services recorded the presence/absence of 12 CFS-related symptoms; 8 of these symptoms were recorded by a Dutch tertiary service. Latent Class Analysis (LCA) was used to assign symptom profiles (phenotypes). Regression models were fitted with phenotype as outcome (in relation to age, sex, BMI, duration of illness) and exposure (in relation to comorbidities and patient-reported measures). Data were available for 7041 UK and 1392 Dutch patients. Almost all patients in both cohorts presented with post-exertional malaise, cognitive dysfunction and disturbed/unrefreshing sleep, and these 3 symptoms were excluded from LCA. In UK patients, six phenotypes emerged: 'full' polysymptomatic (median 8, IQR 7-9 symptoms) 32.8%; 'pain-only' (muscle/joint) 20.3%; 'sore throat/painful lymph node' 4.5%; and 'oligosymptomatic' (median 1, IQR 0-2 symptoms) 4.7%. Two 'partial' polysymptomatic phenotypes were similar to the 'full' phenotype, bar absence of dizziness/nausea/palpitations (21.4%) or sore throat/painful lymph nodes (16.3%). Women and patients with longer duration of illness were more likely to be polysymptomatic. Polysymptomatic patients had more severe illness and more comorbidities. LCA restricted to 5 symptoms recorded in both cohorts indicated 3 classes (polysymptomatic, oligosymptomatic, pain-only), which were replicated in Dutch data. Adults with CFS may have one of 6 symptom-based phenotypes associated with sex, duration and severity of illness, and comorbidity. Future research needs to determine whether phenotypes predict treatment outcomes, and require different treatments. Copyright © 2015 Elsevier Inc. All rights reserved.
The Lay Public's Understanding and Perception of Dementia in a Developed Asian Nation
Tan, Wai Jia; Hong, Song-Iee; Luo, Nan; Lo, Tong Jen; Yap, Philip
2012-01-01
Background Early detection of dementia aims to improve treatment outcomes. However, poor perception and understanding of dementia are significant barriers. We aim to investigate the public's perception of dementia and identify variables associated with the different profiles of public perception. Methods A custom-designed questionnaire was used to assess laypersons’ knowledge and perception of dementia during a health fair at a public hospital in Singapore, a developed Asian nation. Out of a sample of 370 subjects, 32 declined to participate (response rate = 91.4%). Latent class analysis (LCA) was used to identify meaningful subgroups of subjects from significant associations with multiple indicators of dementia awareness. Multinomial logistic regression was performed exploring variables associated with each of the subgroups derived from LCA. Results The majority of the study participants were female (66.9%), 65 years or older (71.1%), and ethnic Chinese (88.1%). LCA classified the study participants into 3 subgroups: Class 1 (good knowledge, good attitude), Class 2 (good knowledge, poor attitude), and Class 3 (poor knowledge, poor attitude), in proportions of 14.28, 63.83, and 21.88%, respectively. Compared to other classes, participants with good knowledge and good attitude towards dementia (Class 1) were more likely to know someone with dementia and understand the effects of the disease, be married, live in private housing, receive higher monthly income, and not profess belief in Buddhism, Taoism, or Hinduism. Conclusion Our results show that the public in Singapore may not be ready for screening initiatives and early dementia diagnosis. Education efforts should be targeted at lower socioeconomic groups, singles, and those of certain oriental religions. PMID:23139688
Ennis, Erin J; Foley, Joe P
2016-07-15
A stochastic approach was utilized to estimate the probability of a successful isocratic or gradient separation in conventional chromatography for numbers of sample components, peak capacities, and saturation factors ranging from 2 to 30, 20-300, and 0.017-1, respectively. The stochastic probabilities were obtained under conditions of (i) constant peak width ("gradient" conditions) and (ii) peak width increasing linearly with time ("isocratic/constant N" conditions). The isocratic and gradient probabilities obtained stochastically were compared with the probabilities predicted by Martin et al. [Anal. Chem., 58 (1986) 2200-2207] and Davis and Stoll [J. Chromatogr. A, (2014) 128-142]; for a given number of components and peak capacity the same trend is always observed: probability obtained with the isocratic stochastic approach
NASA Astrophysics Data System (ADS)
Dou, Jiangpei; Ren, Deqing; Zhang, Xi; Zhu, Yongtian; Zhao, Gang; Wu, Zhen; Chen, Rui; Liu, Chengchao; Yang, Feng; Yang, Chao
2014-08-01
Almost all high-contrast imaging coronagraphs proposed until now are based on passive coronagraph optical components. Recently, Ren and Zhu proposed for the first time a coronagraph that integrates a liquid crystal array (LCA) for the active pupil apodizing and a deformable mirror (DM) for the phase corrections. Here, for demonstration purpose, we present the initial test result of a coronagraphic system that is based on two liquid crystal spatial light modulators (SLM). In the system, one SLM is served as active pupil apodizing and amplitude correction to suppress the diffraction light; another SLM is used to correct the speckle noise that is caused by the wave-front distortions. In this way, both amplitude and phase error can be actively and efficiently compensated. In the test, we use the stochastic parallel gradient descent (SPGD) algorithm to control two SLMs, which is based on the point spread function (PSF) sensing and evaluation and optimized for a maximum contrast in the discovery area. Finally, it has demonstrated a contrast of 10-6 at an inner working angular distance of ~6.2 λ/D, which is a promising technique to be used for the direct imaging of young exoplanets on ground-based telescopes.
Importance sampling variance reduction for the Fokker–Planck rarefied gas particle method
DOE Office of Scientific and Technical Information (OSTI.GOV)
Collyer, B.S., E-mail: benjamin.collyer@gmail.com; London Mathematical Laboratory, 14 Buckingham Street, London WC2N 6DF; Connaughton, C.
The Fokker–Planck approximation to the Boltzmann equation, solved numerically by stochastic particle schemes, is used to provide estimates for rarefied gas flows. This paper presents a variance reduction technique for a stochastic particle method that is able to greatly reduce the uncertainty of the estimated flow fields when the characteristic speed of the flow is small in comparison to the thermal velocity of the gas. The method relies on importance sampling, requiring minimal changes to the basic stochastic particle scheme. We test the importance sampling scheme on a homogeneous relaxation, planar Couette flow and a lid-driven-cavity flow, and find thatmore » our method is able to greatly reduce the noise of estimated quantities. Significantly, we find that as the characteristic speed of the flow decreases, the variance of the noisy estimators becomes independent of the characteristic speed.« less
Isolation and Characterization of Precise Dye/Dendrimer Ratios
Dougherty, Casey A.; Furgal, Joseph C.; van Dongen, Mallory A.; Goodson, Theodore; Banaszak Holl, Mark M.; Manono, Janet; DiMaggio, Stassi
2014-01-01
Fluorescent dyes are commonly conjugated to nanomaterials for imaging applications using stochastic synthesis conditions that result in a Poisson distribution of dye/particle ratios and therefore a broad range of photophysical and biodistribution properties. We report the isolation and characterization of generation 5 poly(amidoamine) (G5 PAMAM) dendrimer samples containing 1, 2, 3, and 4 fluorescein (FC) or 6-carboxytetramethylrhodamine succinimidyl ester (TAMRA) dyes per polymer particle. For the fluorescein case, this was achieved by stochastically functionalizing dendrimer with a cyclooctyne `click' ligand, separation into sample containing precisely defined `click' ligand/particle ratios using reverse-phase high performance liquid chromatography (rp-HPLC), followed by reaction with excess azide-functionalized fluorescein dye. For the TAMRA samples, stochastically functionalized dendrimer was directly separated into precise dye/particle ratios using rp-HPLC. These materials were characterized using 1H and 19F NMR, rp-HPLC, UV-Vis and fluorescence spectroscopy, lifetime measurements, and MALDI. PMID:24604830
Characterization and reconstruction of 3D stochastic microstructures via supervised learning.
Bostanabad, R; Chen, W; Apley, D W
2016-12-01
The need for computational characterization and reconstruction of volumetric maps of stochastic microstructures for understanding the role of material structure in the processing-structure-property chain has been highlighted in the literature. Recently, a promising characterization and reconstruction approach has been developed where the essential idea is to convert the digitized microstructure image into an appropriate training dataset to learn the stochastic nature of the morphology by fitting a supervised learning model to the dataset. This compact model can subsequently be used to efficiently reconstruct as many statistically equivalent microstructure samples as desired. The goal of this paper is to build upon the developed approach in three major directions by: (1) extending the approach to characterize 3D stochastic microstructures and efficiently reconstruct 3D samples, (2) improving the performance of the approach by incorporating user-defined predictors into the supervised learning model, and (3) addressing potential computational issues by introducing a reduced model which can perform as effectively as the full model. We test the extended approach on three examples and show that the spatial dependencies, as evaluated via various measures, are well preserved in the reconstructed samples. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.
Tsetsos, Konstantinos; Gao, Juan; McClelland, James L.; Usher, Marius
2012-01-01
When people make decisions, do they give equal weight to evidence arriving at different times? A recent study (Kiani et al., 2008) using brief motion pulses (superimposed on a random moving dot display) reported a primacy effect: pulses presented early in a motion observation period had a stronger impact than pulses presented later. This observation was interpreted as supporting the bounded diffusion (BD) model and ruling out models in which evidence accumulation is subject to leakage or decay of early-arriving information. We use motion pulses and other manipulations of the timing of the perceptual evidence in new experiments and simulations that support the leaky competing accumulator (LCA) model as an alternative to the BD model. While the LCA does include leakage, we show that it can exhibit primacy as a result of competition between alternatives (implemented via mutual inhibition), when the inhibition is strong relative to the leak. Our experiments replicate the primacy effect when participants must be prepared to respond quickly at the end of a motion observation period. With less time pressure, however, the primacy effect is much weaker. For 2 (out of 10) participants, a primacy bias observed in trials where the motion observation period is short becomes weaker or reverses (becoming a recency effect) as the observation period lengthens. Our simulation studies show that primacy is equally consistent with the LCA or with BD. The transition from primacy-to-recency can also be captured by the LCA but not by BD. Individual differences and relations between the LCA and other models are discussed. PMID:22701399
Loubet, Philippe; Roux, Philippe; Loiseau, Eleonore; Bellon-Maurel, Veronique
2014-12-15
Water is a growing concern in cities, and its sustainable management is very complex. Life cycle assessment (LCA) has been increasingly used to assess the environmental impacts of water technologies during the last 20 years. This review aims at compiling all LCA papers related to water technologies, out of which 18 LCA studies deals with whole urban water systems (UWS). A focus is carried out on these 18 case studies which are analyzed according to criteria derived from the four phases of LCA international standards. The results show that whereas the case studies share a common goal, i.e., providing quantitative information to policy makers on the environmental impacts of urban water systems and their forecasting scenarios, they are based on different scopes, resulting in the selection of different functional units and system boundaries. A quantitative comparison of life cycle inventory and life cycle impact assessment data is provided, and the results are discussed. It shows the superiority of information offered by multi-criteria approaches for decision making compared to that derived from mono-criterion. From this review, recommendations on the way to conduct the environmental assessment of urban water systems are given, e.g., the need to provide consistent mass balances in terms of emissions and water flows. Remaining challenges for urban water system LCAs are identified, such as a better consideration of water users and resources and the inclusion of recent LCA developments (territorial approaches and water-related impacts). Copyright © 2014 Elsevier Ltd. All rights reserved.
EFO-LCI: A New Life Cycle Inventory Database of Forestry Operations in Europe
NASA Astrophysics Data System (ADS)
Cardellini, Giuseppe; Valada, Tatiana; Cornillier, Claire; Vial, Estelle; Dragoi, Marian; Goudiaby, Venceslas; Mues, Volker; Lasserre, Bruno; Gruchala, Arkadiusz; Rørstad, Per Kristian; Neumann, Mathias; Svoboda, Miroslav; Sirgmets, Risto; Näsärö, Olli-Pekka; Mohren, Frits; Achten, Wouter M. J.; Vranken, Liesbet; Muys, Bart
2018-06-01
Life cycle assessment (LCA) has become a common methodology to analyze environmental impacts of forestry systems. Although LCA has been widely applied to forestry since the 90s, the LCAs are still often based on generic Life Cycle Inventory (LCI). With the purpose of improving LCA practices in the forestry sector, we developed a European Life Cycle Inventory of Forestry Operations (EFO-LCI) and analyzed the available information to check if within the European forestry sector national differences really exist. We classified the European forests on the basis of "Forest Units" (combinations of tree species and silvicultural practices). For each Forest Unit, we constructed the LCI of their forest management practices on the basis of a questionnaire filled out by national silvicultural experts. We analyzed the data reported to evaluate how they vary over Europe and how they affect LCA results and made freely available the inventory data collected for future use. The study shows important variability in rotation length, type of regeneration, amount and assortments of wood products harvested, and machinery used due to the differences in management practices. The existing variability on these activities sensibly affect LCA results of forestry practices and raw wood production. Although it is practically unfeasible to collect site-specific data for all the LCAs involving forest-based products, the use of less generic LCI data of forestry practice is desirable to improve the reliability of the studies. With the release of EFO-LCI we made a step toward the construction of regionalized LCI for the European forestry sector.
Hanserud, Ola Stedje; Cherubini, Francesco; Øgaard, Anne Falk; Müller, Daniel B; Brattebø, Helge
2018-02-15
Increased nutrient cycling in the agri-food system is a way to achieve a healthier nutrient stewardship and more sustainable food production. In life cycle assessment (LCA) studies, use of recycled fertilizer products is often credited by the substitution method, which subtracts the environmental burdens associated with avoided production of mineral fertilizer from the system under study. The environmental benefits from avoided fertilizer production can make an important contribution to the results, but different calculation principles and often implicit assumptions are used to estimate the amount of avoided mineral fertilizer. This may hinder comparisons between studies. The present study therefore examines how the choice of substitution principles influences LCA results. Three different substitution principles, called one-to-one, maintenance, and adjusted maintenance, are identified, and we test the importance of these in a case study on cattle slurry management. We show that the inventory of avoided mineral fertilizer varies greatly when the different principles are applied, with strong influences on two-thirds of LCA impact categories. With the one-to-one principle, there is a risk of systematically over-estimating the environmental benefits from nutrient cycling. In a sensitivity analysis we show that the difference between the principles is closely related to the application rate and levels of residual nutrients in the soil. We recommend that LCA practitioners first and foremost state and justify the substitution method they use, in order to increase transparency and comparability with other studies. Copyright © 2017 Elsevier B.V. All rights reserved.
On process optimization considering LCA methodology.
Pieragostini, Carla; Mussati, Miguel C; Aguirre, Pío
2012-04-15
The goal of this work is to research the state-of-the-art in process optimization techniques and tools based on LCA, focused in the process engineering field. A collection of methods, approaches, applications, specific software packages, and insights regarding experiences and progress made in applying the LCA methodology coupled to optimization frameworks is provided, and general trends are identified. The "cradle-to-gate" concept to define the system boundaries is the most used approach in practice, instead of the "cradle-to-grave" approach. Normally, the relationship between inventory data and impact category indicators is linearly expressed by the characterization factors; then, synergic effects of the contaminants are neglected. Among the LCIA methods, the eco-indicator 99, which is based on the endpoint category and the panel method, is the most used in practice. A single environmental impact function, resulting from the aggregation of environmental impacts, is formulated as the environmental objective in most analyzed cases. SimaPro is the most used software for LCA applications in literature analyzed. The multi-objective optimization is the most used approach for dealing with this kind of problems, where the ε-constraint method for generating the Pareto set is the most applied technique. However, a renewed interest in formulating a single economic objective function in optimization frameworks can be observed, favored by the development of life cycle cost software and progress made in assessing costs of environmental externalities. Finally, a trend to deal with multi-period scenarios into integrated LCA-optimization frameworks can be distinguished providing more accurate results upon data availability. Copyright © 2011 Elsevier Ltd. All rights reserved.
Lee, Seung-Yup; Lee, Donghwan; Nam, Cho Rong; Kim, Da Yea; Park, Sera; Kwon, Jun-Gun; Kweon, Yong-Sil; Lee, Youngjo; Kim, Dai Jin; Choi, Jung-Seok
2018-05-23
Background and objectives The ubiquitous Internet connections by smartphones weakened the traditional boundaries between computers and mobile phones. We sought to explore whether smartphone-related problems differ from those of computer use according to gender using latent class analysis (LCA). Methods After informed consents, 555 Korean middle-school students completed surveys on gaming, Internet use, and smartphone usage patterns. They also completed various psychosocial instruments. LCA was performed for the whole group and by gender. In addition to ANOVA and χ 2 tests, post-hoc tests were conducted to examine differences among the LCA subgroups. Results In the whole group (n = 555), four subtypes were identified: dual-problem users (49.5%), problematic Internet users (7.7%), problematic smartphone users (32.1%), and "healthy" users (10.6%). Dual-problem users scored highest for addictive behaviors and other psychopathologies. The gender-stratified LCA revealed three subtypes for each gender. With dual-problem and healthy subgroup as common, problematic Internet subgroup was classified in the males, whereas problematic smartphone subgroup was classified in the females in the gender-stratified LCA. Thus, distinct patterns were observed according to gender with higher proportion of dual-problem present in males. While gaming was associated with problematic Internet use in males, aggression and impulsivity demonstrated associations with problematic smartphone use in females. Conclusions An increase in the number of digital media-related problems was associated with worse outcomes in various psychosocial scales. Gaming may play a crucial role in males solely displaying Internet-related problems. The heightened impulsivity and aggression seen in our female problematic smartphone users requires further research.
EFO-LCI: A New Life Cycle Inventory Database of Forestry Operations in Europe.
Cardellini, Giuseppe; Valada, Tatiana; Cornillier, Claire; Vial, Estelle; Dragoi, Marian; Goudiaby, Venceslas; Mues, Volker; Lasserre, Bruno; Gruchala, Arkadiusz; Rørstad, Per Kristian; Neumann, Mathias; Svoboda, Miroslav; Sirgmets, Risto; Näsärö, Olli-Pekka; Mohren, Frits; Achten, Wouter M J; Vranken, Liesbet; Muys, Bart
2018-06-01
Life cycle assessment (LCA) has become a common methodology to analyze environmental impacts of forestry systems. Although LCA has been widely applied to forestry since the 90s, the LCAs are still often based on generic Life Cycle Inventory (LCI). With the purpose of improving LCA practices in the forestry sector, we developed a European Life Cycle Inventory of Forestry Operations (EFO-LCI) and analyzed the available information to check if within the European forestry sector national differences really exist. We classified the European forests on the basis of "Forest Units" (combinations of tree species and silvicultural practices). For each Forest Unit, we constructed the LCI of their forest management practices on the basis of a questionnaire filled out by national silvicultural experts. We analyzed the data reported to evaluate how they vary over Europe and how they affect LCA results and made freely available the inventory data collected for future use. The study shows important variability in rotation length, type of regeneration, amount and assortments of wood products harvested, and machinery used due to the differences in management practices. The existing variability on these activities sensibly affect LCA results of forestry practices and raw wood production. Although it is practically unfeasible to collect site-specific data for all the LCAs involving forest-based products, the use of less generic LCI data of forestry practice is desirable to improve the reliability of the studies. With the release of EFO-LCI we made a step toward the construction of regionalized LCI for the European forestry sector.
Life Cycle Assessment (ISO 14040) implementation in foods of animal and plant origin: review.
Arvanitoyannis, Ioannis S; Kotsanopoulos, Konstantinos V; Veikou, Agapi
2014-01-01
The importance of environmental protection has been recently upgraded due to the continuously increasing environmental pollution load. Life Cycle Assessment (LCA), wellknown as ISO 14040, has been repeatedly shown to be a useful and powerful tool for assessing the environmental performance of industrial processes, both in the European and American continents as well as in many Asian countries (such as Japan and China). To the best of our knowledge, almost no information is provided in relation to LCA implementation in Africa apart from an article related to Egypt. Although food industries are not considered to be among the most heavily polluting ones, for some like olive oil, wine, dairy, and meat processing, their impact on the environment is a heavy burden. The introduction of LCA aimed at identifying both inputs and outputs to find out which are the most detrimental to the environment in terms of water/energy consumption and solid/liquid and gas releases. In this review, a thorough coverage of literature was made in an attempt to compare the implementation of LCA to a variety of products of both plant and animal origin. It was concluded that there is a high number of subsystems suggested for the same product, thereby, occasionally leading to confusion. An idea toward solving the problem is to proceed to some sort of standardization by means of several generic case studies of LCA implementation, similarly to what had happened in the case of Hazard Analysis and Critical Control Points (HACCP) implementation in the United States, Canada, Australia, United Kingdom, and other countries.
Stamovlasis, Dimitrios; Papageorgiou, George; Tsitsipis, Georgios; Tsikalas, Themistoklis; Vaiopoulou, Julie
2018-01-01
This paper illustrates two psychometric methods, latent class analysis (LCA) and taxometric analysis (TA) using empirical data from research probing children's mental representation in science learning. LCA is used to obtain a typology based on observed variables and to further investigate how the encountered classes might be related to external variables, where the effectiveness of classification process and the unbiased estimations of parameters become the main concern. In the step-wise LCA, the class membership is assigned and subsequently its relationship with covariates is established. This leading-edge modeling approach suffers from severe downward-biased estimations. The illustration of LCA is focused on alternative bias correction approaches and demonstrates the effect of modal and proportional class-membership assignment along with BCH and ML correction procedures. The illustration of LCA is presented with three covariates, which are psychometric variables operationalizing formal reasoning, divergent thinking and field dependence-independence, respectively. Moreover, taxometric analysis, a method designed to detect the type of the latent structural model, categorical or dimensional, is introduced, along with the relevant basic concepts and tools. TA was applied complementarily in the same data sets to answer the fundamental hypothesis about children's naïve knowledge on the matters under study and it comprises an additional asset in building theory which is fundamental for educational practices. Taxometric analysis provided results that were ambiguous as far as the type of the latent structure. This finding initiates further discussion and sets a problematization within this framework rethinking fundamental assumptions and epistemological issues. PMID:29713300
Movements and Spatial Use of False Killer Whales in Hawaii: Satellite Tagging Studies in 2009
2011-02-07
with estimated error of between 500 and 1 500 m), as well as LC0 , LCA, LCB, and LCZ locations (with no estimation of accuracy) were only retained...for each individual that passed the Douglas Argos-Filter, by location class (LC) ID # locations after filtering LC3 LC2 LC1 LC0 LCA LCB LCZ
Life-Cycle Inventory Analysis of Laminated Veneer Lumber Production in the United States
Richard D. Bergman
2015-01-01
Documenting the environmental performance of building products is becoming increasingly common. Developing environmental product declarations (EPDs) based on life-cycle assessment (LCA) data is one way to provide scientific documentation. Many U.S. structural wood products have LCA-based âeco-labelsâ using the ISO standard. However, the standard requires underlying...
Life-Cycle Inventory Analysis of I-joist Production in the United States
Richard D. Bergman
2015-01-01
Documenting the environmental performance of building products is becoming increasingly common. Creating environmental product declarations (EPDs) based on life-cycle assessment (LCA) data is one approach to provide scientific documentation of the productsâ environmental performance. Many U.S. structural wood products have LCA-based âeco-labelsâ developed under the ISO...
The WULCA group, active since 2007 on Water Use in LCA, commenced the development of consensus-based indicators in January 2014. This activity is planned to last 2 years and covers human health, ecosystem quality, and a stress-based indicator. This latter encompasses potential de...
LCA applied to elucidate opportunities for biogas from wastewaters in Colombia.
Meneses-Jácome, A; Osorio-Molina, A; Parra-Saldívar, R; Gallego-Suárez, D; Velásquez-Arredondo, H I; Ruiz-Colorado, A A
2015-01-01
Biogas produced in municipal and industrial wastewater treatment facilities (BWWF) is a resource wasted in several socio-economic contexts. BWWF-based projects are compared against energy projects using conventional electricity or natural gas (NG), following strict economic considerations that usually tip the balance in favour of conventional energy supply. This is because the economic gain associated with the environmental benefits of using small biogas sources like BWWF does not overcome the technical and financial effort required in these types of project. This paper shows a broader application of life cycle assessment (LCA) methodology to explore opportunities for positive (or effective) utilization of BWWF in the Colombian context. LCA has been used to evaluate the supply-chain of NG which is the direct competitor of BWWF, in three different Colombian regions, in order to identify those where higher NG environmental impacts offer increased environmental added-value to BWWF use. LCA was also applied to study two BWWF valorization scenarios in the poultry processing industry. It shows how valorization options for BWWF are more realistic and effective when specific-regional loads are applied to the environmental assessment of NG supply-chain and BWWF valorization.
Gómez-Robles, Aida; Bermúdez de Castro, José María; Arsuaga, Juan-Luis; Carbonell, Eudald; Polly, P. David
2013-01-01
A central problem in paleoanthropology is the identity of the last common ancestor of Neanderthals and modern humans ([N-MH]LCA). Recently developed analytical techniques now allow this problem to be addressed using a probabilistic morphological framework. This study provides a quantitative reconstruction of the expected dental morphology of the [N-MH]LCA and an assessment of whether known fossil species are compatible with this ancestral position. We show that no known fossil species is a suitable candidate for being the [N-MH]LCA and that all late Early and Middle Pleistocene taxa from Europe have Neanderthal dental affinities, pointing to the existence of a European clade originated around 1 Ma. These results are incongruent with younger molecular divergence estimates and suggest at least one of the following must be true: (i) European fossils and the [N-MH]LCA selectively retained primitive dental traits; (ii) molecular estimates of the divergence between Neanderthals and modern humans are underestimated; or (iii) phenotypic divergence and speciation between both species were decoupled such that phenotypic differentiation, at least in dental morphology, predated speciation. PMID:24145426
Analytical pricing formulas for hybrid variance swaps with regime-switching
NASA Astrophysics Data System (ADS)
Roslan, Teh Raihana Nazirah; Cao, Jiling; Zhang, Wenjun
2017-11-01
The problem of pricing discretely-sampled variance swaps under stochastic volatility, stochastic interest rate and regime-switching is being considered in this paper. An extension of the Heston stochastic volatility model structure is done by adding the Cox-Ingersoll-Ross (CIR) stochastic interest rate model. In addition, the parameters of the model are permitted to have transitions following a Markov chain process which is continuous and discoverable. This hybrid model can be used to illustrate certain macroeconomic conditions, for example the changing phases of business stages. The outcome of our regime-switching hybrid model is presented in terms of analytical pricing formulas for variance swaps.
Preferential sampling and Bayesian geostatistics: Statistical modeling and examples.
Cecconi, Lorenzo; Grisotto, Laura; Catelan, Dolores; Lagazio, Corrado; Berrocal, Veronica; Biggeri, Annibale
2016-08-01
Preferential sampling refers to any situation in which the spatial process and the sampling locations are not stochastically independent. In this paper, we present two examples of geostatistical analysis in which the usual assumption of stochastic independence between the point process and the measurement process is violated. To account for preferential sampling, we specify a flexible and general Bayesian geostatistical model that includes a shared spatial random component. We apply the proposed model to two different case studies that allow us to highlight three different modeling and inferential aspects of geostatistical modeling under preferential sampling: (1) continuous or finite spatial sampling frame; (2) underlying causal model and relevant covariates; and (3) inferential goals related to mean prediction surface or prediction uncertainty. © The Author(s) 2016.
NASA Technical Reports Server (NTRS)
Morgera, S. D.; Cooper, D. B.
1976-01-01
The experimental observation that a surprisingly small sample size vis-a-vis dimension is needed to achieve good signal-to-interference ratio (SIR) performance with an adaptive predetection filter is explained. The adaptive filter requires estimates as obtained by a recursive stochastic algorithm of the inverse of the filter input data covariance matrix. The SIR performance with sample size is compared for the situations where the covariance matrix estimates are of unstructured (generalized) form and of structured (finite Toeplitz) form; the latter case is consistent with weak stationarity of the input data stochastic process.
Updating of U.S. Wood Product Life-Cycle Assessment Data for Environmental Product Declarations
Richard Bergman; Elaine Oneil; Maureen Puettmann; Ivan Eastin; Indroneil Ganguly
2014-01-01
The marketplace has an increasing desire for credible and transparent product eco-labels based on life-cycle assessment (LCA) data, especially involving international trade. Over the past several years, stakeholders in the U.S. wood products industry have developed many such âeco-labelsâ under the ISO standard of LCA-based environmental product declarations (EPDs). The...
How to Say "No" to a Nonword: A Leaky Competing Accumulator Model of Lexical Decision
ERIC Educational Resources Information Center
Dufau, Stephane; Grainger, Jonathan; Ziegler, Johannes C.
2012-01-01
We describe a leaky competing accumulator (LCA) model of the lexical decision task that can be used as a response/decision module for any computational model of word recognition. The LCA model uses evidence for a word, operationalized as some measure of lexical activity, as input to the "YES" decision node. Input to the "NO" decision node is…
A Life-Cycle Assessment of Biofuels: Tracing Energy and Carbon through a Fuel-Production System
ERIC Educational Resources Information Center
Krauskopf, Sara
2010-01-01
A life-cycle assessment (LCA) is a tool used by engineers to make measurements of net energy, greenhouse gas production, water consumption, and other items of concern. This article describes an activity designed to walk students through the qualitative part of an LCA. It asks them to consider the life-cycle costs of ethanol production, in terms of…
NASA Astrophysics Data System (ADS)
Khelifa, Sofiane
2016-12-01
The purpose of this paper is to compare the noise characteristics in DORIS station positions between the three solutions derived by IGN-JPL (named as IGN), INASAN (named as INA) and CNES-CLS (named as LCA) Analysis Centres for ITRF2014 contribution, and to evaluate the improvements of these reprocessed solutions in terms of noise level with the previous ITRF2008 solutions. To the weekly STCD (STation Coordinate Difference) residual position time series of 23 stations referred to ITRF2008 and expressed in the local frame (North, East and Up), we calculated the Allan variance to identify their noise type, and applied the wavelet transform to assess their annual and semi-annual signals, and their noise level. The results reveal that the three solutions are dominated by white noise in all three components. The noise level is the lowest in the LCA solution; the average noise level in respectively, North, East and Vertical components is around 5.9 mm, 9.3 mm and 6.6 mm for LCA, 9 mm, 11.6 mm and 9 mm for IGN, and 8.7 mm, 11.6 mm and 9.1 mm for INA. The results also show that the tropical (±23.5°) stations are more distorted than mid-latitude and high latitude stations. In terms of noise level, the reprocessed LCA solution (lca14wd40) and its previous solution (lca11wd02) converge to similar results, while the reprocessed IGN (ign14wd15) and INA (ina14wd08) solutions show improvements with respect to their previous solutions (ign11wd01) and (ina12wd01) respectively, especially in the East component. Furthermore, the possible origin of the estimated annual signal was also investigated by comparing it with hydrology and atmospheric loading displacements. The annual Vertical component for the three solutions is more correlated with the GLDAS/Noah hydrology model with an average correlation of about 0.35, and shows a strong correlation of about 0.76 with ECMWF-IB and ECMWF-MOG2D atmospheric models for the station Krasnoyarsk (KRBB) in Siberia.
Scanlon, Kelly A; Gray, George M; Francis, Royce A; Lloyd, Shannon M; LaPuma, Peter
2013-03-06
Life cycle assessment (LCA) is a systems-based method used to determine potential impacts to the environment associated with a product throughout its life cycle. Conclusions from LCA studies can be applied to support decisions regarding product design or public policy, therefore, all relevant inputs (e.g., raw materials, energy) and outputs (e.g., emissions, waste) to the product system should be evaluated to estimate impacts. Currently, work-related impacts are not routinely considered in LCA. The objectives of this paper are: 1) introduce the work environment disability-adjusted life year (WE-DALY), one portion of a characterization factor used to express the magnitude of impacts to human health attributable to work-related exposures to workplace hazards; 2) outline the methods for calculating the WE-DALY; 3) demonstrate the calculation; and 4) highlight strengths and weaknesses of the methodological approach. The concept of the WE-DALY and the methodological approach to its calculation is grounded in the World Health Organization's disability-adjusted life year (DALY). Like the DALY, the WE-DALY equation considers the years of life lost due to premature mortality and the years of life lived with disability outcomes to estimate the total number of years of healthy life lost in a population. The equation requires input in the form of the number of fatal and nonfatal injuries and illnesses that occur in the industries relevant to the product system evaluated in the LCA study, the age of the worker at the time of the fatal or nonfatal injury or illness, the severity of the injury or illness, and the duration of time lived with the outcomes of the injury or illness. The methodological approach for the WE-DALY requires data from various sources, multi-step instructions to determine each variable used in the WE-DALY equation, and assumptions based on professional opinion. Results support the use of the WE-DALY in a characterization factor in LCA. Integrating occupational health into LCA studies will provide opportunities to prevent shifting of impacts between the work environment and the environment external to the workplace and co-optimize human health, to include worker health, and environmental health.
LCA as a Tool to Evaluate Green Infrastructure's Environmental Performance
NASA Astrophysics Data System (ADS)
Catalano De Sousa, M.; Erispaha, A.; Spatari, S.; Montalto, F.
2011-12-01
Decentralized approaches to managing urban stormwater through use of green infrastructure (GI) often lead to system-wide efficiency gains within the urban watershed's energy supply system. These efficiencies lead to direct greenhouse gas (GHG) emissions savings, and also restore some ecosystem functions within the urban landscape. We developed a consequential life cycle assessment (LCA) model to estimate the life cycle energy, global warming potential (GWP), and payback times for each if GI were applied within a select neighborhood in New York City. We applied the SIMAPRO LCA software and the economic input-output LCA (EIO-LCA) tool developed by Carnegie Mellon University. The results showed that for a new intersection installation highlighted in this study a conventional infrastructure construction would emit and use approximately 3 times more for both CO2 and energy than a design using GI. Two GI benefits were analyzed with regards to retrofitting the existing intersection. The first was related to the savings in energy and CO2 at the Waste Water Treatment Plant via runoff reduction accrued from GI use. The second benefit was related to the avoided environmental costs associated with an additional new grey infrastructure installation needed to prevent CSO in case of no GI implementation. The first benefit indicated a high payback time for a GI installation in terms of CO2 and energy demand (80 and 90 years respectively) and suggest a slow energy and carbon recovery time. However, concerning to the second benefit, GI proved to be a sustainable alternative considering the high CO2 releases (429 MTE) and energy demand (5.5 TJ) associated with a grey infrastructure construction.
Kim, Tae Hyoung; Tae, Sung Ho
2016-01-01
This study aims to develop a system for assessing the impact of the substances discharged from concrete production process on six environmental impact categories, i.e., global warming (GWP), acidification (AP), eutrophication (EP), abiotic depletion (ADP), ozone depletion (ODP), and photochemical oxidant creation (POCP), using the life a cycle assessment (LCA) method. To achieve this, this study proposed an LCA method specifically applicable to the Korean concrete industry by adapting the ISO standards to suit the Korean situations. The proposed LCA method involves a system that performs environmental impact assessment on the basis of input information on concrete mix design, transport distance, and energy consumption in a batch plant. The Concrete Lifecycle Assessment System (CLAS) thus developed provides user-friendly support for environmental impact assessment with specialized database for concrete mix materials and energy sources. In the case analysis using the CLAS, among the substances discharged from the production of 24 MPa concrete, those contributing to GWP, AP, EP, ADP, ODP, and POCP were assessed to amount to 309 kg-CO2 eq/m3, 28.7 kg-SO2 eq/m3, 5.21 kg-PO43− eq/m3, 0.000049 kg-CFC11 eq/m3, 34 kg/m3, and 21 kg-Ethylene eq/m3, respectively. Of these six environmental impact categories selected for the LCA in this study, ordinary Portland cement (OPC) was found to contribute most intensely to GWP and POCP, and aggregates, to AP, EP, ODP, and ADP. It was also found that the mix design with increased prop proportion of recycled aggregate was found to contribute to reducing the impact in all other categories. PMID:27827843
González-García, Sara; García Lozano, Raúl; Moreira, M Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo; Murphy, Richard J
2012-06-01
The environmental profile of a set of wood furniture was carried out to define the best design criteria for its eco-design. A baby cot convertible into a bed, a study desk and a bedside table were the objects of study. Two quantitative and qualitative environmental approaches were combined in order to propose improvement alternatives: Life Cycle Assessment (LCA) and Design for Environment (DfE). In the first case Life Cycle Assessment (LCA) was applied to identify the hot spots in the product system. As a next step, LCA information was used in eco-briefing to determine several improvement alternatives. A wood products company located in Catalonia (NE Spain) was assessed in detail, dividing the process into three stages: assembly, finishing and packaging. Ten impact categories were considered in the LCA study: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidant formation. Two processes can be considered the key environmental factors: the production of the wooden boards and electricity, with contributions of 45-68% and 14-33% respectively depending on the impact categories. Subsequently, several improvement alternatives were proposed in the eco-design process (DfE) to achieve reductions in a short-medium period of time in the environmental impact. These eco-design strategies could reduce the environmental profile of the setup by 14%. The correct methodological adaptation of the concept of eco-briefing, as a tool for communication among environmental technicians and designers, the simplification of the analytical tool used and the LCA, could facilitate the environmental analysis of a product. The results obtained provide information that can help the furniture sector to improve their environmental performance. Copyright © 2012 Elsevier B.V. All rights reserved.
Life cycle assessment of TV sets in China: a case study of the impacts of CRT monitors.
Song, Qingbin; Wang, Zhishi; Li, Jinhui; Zeng, Xianlai
2012-10-01
Along with the rapid increase in both production and use of TV sets in China, there is an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of these sets. This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese TV sets. An assessment of the TV set device (focusing on the Cathode Ray Tube (CRT) monitor) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software version 7.2 and expressed with the Eco-indicator' 99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the CML method was used in order to estimate the influence of the choice of the assessment method on the results. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations on the current Chinese situation. The established LCA study shows that the use stage of such devices has the highest environmental impact, followed by the manufacturing stage. In the manufacturing stage, the CRT and the Printed Circuit Board (PCB) are those components contributing the most environmental impacts. During the use phase, the environmental impacts are due entirely to the methods of electricity generation used to run them, since no other aspects were taken into account for this phase. The final processing step-the end-of-life stage-can lead to a clear environmental benefit when the TV sets are processed through the formal dismantling enterprises in China. Copyright © 2012 Elsevier Ltd. All rights reserved.
Sørensen, Sabrina Storgaard; Jensen, Morten Berg; Pedersen, Kjeld Møller; Ehlers, Lars
2018-02-01
To examine the heterogeneity in cost-effectiveness analyses of patient-tailored complex interventions. Latent class analysis (LCA) was performed on data from a randomized controlled trial evaluating a patient-tailored case management strategy for patients suffering from chronic obstructive pulmonary disease (COPD). LCA was conducted on detailed process variables representing service variation in the intervention group. Features of the identified latent classes were compared for consistency with baseline demographic, clinical, and economic characteristics for each class. Classes for the control group, corresponding to the identified latent classes for the intervention group, were identified using multinomial logistic regression. Cost-utility analyses were then conducted at the class level, and uncertainty surrounding the point estimates was assessed by probabilistic sensitivity analysis. The LCA identified three distinct classes: the psychologically care class, the extensive COPD care class, and the limited COPD care class. Patient baseline characteristics were in line with the features identified in the LCA. Evaluation of cost-effectiveness revealed highly disparate results, and case management for only the extensive COPD care class appeared cost-effective with an incremental cost-effectiveness ratio of £26,986 per quality-adjusted life-year gained using the threshold value set by the National Institute of Health and Care Excellence. Findings indicate that researchers evaluating patient-tailored complex interventions need to address both supply-side variation and demand-side heterogeneity to link findings with outcome. The article specifically proposes the use of LCA because it is believed to have the potential to enable more appropriate targeting of complex care strategies. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.
Latent class analysis reveals clinically relevant atopy phenotypes in 2 birth cohorts.
Hose, Alexander J; Depner, Martin; Illi, Sabina; Lau, Susanne; Keil, Thomas; Wahn, Ulrich; Fuchs, Oliver; Pfefferle, Petra Ina; Schmaußer-Hechfellner, Elisabeth; Genuneit, Jon; Lauener, Roger; Karvonen, Anne M; Roduit, Caroline; Dalphin, Jean-Charles; Riedler, Josef; Pekkanen, Juha; von Mutius, Erika; Ege, Markus J
2017-06-01
Phenotypes of childhood-onset asthma are characterized by distinct trajectories and functional features. For atopy, definition of phenotypes during childhood is less clear. We sought to define phenotypes of atopic sensitization over the first 6 years of life using a latent class analysis (LCA) integrating 3 dimensions of atopy: allergen specificity, time course, and levels of specific IgE (sIgE). Phenotypes were defined by means of LCA in 680 children of the Multizentrische Allergiestudie (MAS) and 766 children of the Protection against allergy: Study in Rural Environments (PASTURE) birth cohorts and compared with classical nondisjunctive definitions of seasonal, perennial, and food sensitization with respect to atopic diseases and lung function. Cytokine levels were measured in the PASTURE cohort. The LCA classified predominantly by type and multiplicity of sensitization (food vs inhalant), allergen combinations, and sIgE levels. Latent classes were related to atopic disease manifestations with higher sensitivity and specificity than the classical definitions. LCA detected consistently in both cohorts a distinct group of children with severe atopy characterized by high seasonal sIgE levels and a strong propensity for asthma; hay fever; eczema; and impaired lung function, also in children without an established asthma diagnosis. Severe atopy was associated with an increased IL-5/IFN-γ ratio. A path analysis among sensitized children revealed that among all features of severe atopy, only excessive sIgE production early in life affected asthma risk. LCA revealed a set of benign, symptomatic, and severe atopy phenotypes. The severe phenotype emerged as a latent condition with signs of a dysbalanced immune response. It determined high asthma risk through excessive sIgE production and directly affected impaired lung function. Copyright © 2016 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.
Environmental impact assessment and eco-friendly decision-making in civil structures.
Kim, Sang-Hyo; Choi, Moon-Seock; Mha, Ho-Seong; Joung, Jung-Yeun
2013-09-15
This study develops two useful procedures in performing an environmental-impact assessment. One is the advanced life-cycle assessment (LCA) method, which effectively tracks the flow of materials and considers the recycling and demolition of a civil structure. The other is an eco-friendly decision-making procedure, which may effectively apply when determining the prototype of a civil structure. The advanced LCA method differs from traditional LCA procedure, as it classifies the input material prior to the impact assessment. Classification work is performed to establish independent life-cycle stages for each material. The processes of recycling and demolition are appropriately added to the life-cycle stages. The impact assessment is performed separately for the materials, and results are aggregated at the end of the analysis. The eco-friendly decision-making procedure enables designers to choose an economical, and environmentally friendly, alternative during the planning phase of the construction project. This procedure rationally amalgamates economical value and environmental effects into a single indicator. The life cycle cost (LCC) of a structure can be analysed by using conventional LCC tools, whereas the environmental impact is estimated by LCA. The results from LCC and LCA are then integrated by using either a CO2 conversion method or an analytical hierarchy process (AHP). The CO2 conversion method presents the result as a monetary value, whereas the AHP presents the result as a non-dimensional value. A practical example using a steel box girder bridge and a pre-stressed concrete (PSC) box-girder bridge is also given in order to aid the understanding of the presented procedure. Copyright © 2013 Elsevier Ltd. All rights reserved.
Phillips, Robert; Jeswani, Harish Kumar; Azapagic, Adisa; Apul, Defne
2018-09-15
Current life cycle assessment (LCA) models do not explicitly incorporate the impacts from urban stormwater pollution. To address this issue, a framework to estimate the impacts from urban stormwater pollution over the lifetime of a system has been developed, laying the groundwork for subsequent improvements in life cycle databases and LCA modelling. The proposed framework incorporates urban stormwater event mean concentration (EMC) data into existing LCA impact categories to account for the environmental impacts associated with urban land occupation across the whole life cycle of a system. It consists of five steps: (1) compilation of inventory of urban stormwater pollutants; (2) collection of precipitation data; (3) classification and characterisation within existing midpoint impact categories; (4) collation of inventory data for impermeable urban land occupation; and (5) impact assessment. The framework is generic and can be applied to any system using any LCA impact method. Its application is demonstrated by two illustrative case studies: electricity generation and production of construction materials. The results show that pollutants in urban stormwater have an influence on human toxicity, freshwater and marine ecotoxicity, marine eutrophication, freshwater eutrophication and terrestrial ecotoxicity. Among these, urban stormwater pollution has the highest relative contribution to the eutrophication potentials. The results also suggest that stormwater pollution from urban areas can have a substantial effect on the life cycle impacts of some systems (construction materials), while for some systems the effect is small (e.g. electricity generation). However, it is not possible to determine a priori which systems are affected so that the impacts from stormwater pollution should be considered routinely in future LCA studies. The paper also proposes ways to incorporate stormwater pollution burdens into the life cycle databases. Copyright © 2018 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hoogmartens, Rob, E-mail: rob.hoogmartens@uhasselt.be; Van Passel, Steven, E-mail: steven.vanpassel@uhasselt.be; Van Acker, Karel, E-mail: karel.vanacker@lrd.kuleuven.be
Increasing interest in sustainability has led to the development of sustainability assessment tools such as Life Cycle Analysis (LCA), Life Cycle Costing (LCC) and Cost–Benefit Analysis (CBA). Due to methodological disparity of these three tools, conflicting assessment results generate confusion for many policy and business decisions. In order to interpret and integrate assessment results, the paper provides a framework that clarifies the connections and coherence between the included assessment methodologies. Building on this framework, the paper further focuses on key aspects to adapt any of the methodologies to full sustainability assessments. Aspects dealt with in the review are for examplemore » the reported metrics, the scope, data requirements, discounting, product- or project-related and approaches with respect to scarcity and labor requirements. In addition to these key aspects, the review shows that important connections exist: (i) the three tools can cope with social inequality, (ii) processes such as valuation techniques for LCC and CBA are common, (iii) Environmental Impact Assessment (EIA) is used as input in both LCA and CBA and (iv) LCA can be used in parallel with LCC. Furthermore, the most integrated sustainability approach combines elements of LCA and LCC to achieve the Life Cycle Sustainability Assessment (LCSA). The key aspects and the connections referred to in the review are illustrated with a case study on the treatment of end-of-life automotive glass. - Highlights: • Proliferation of assessment tools creates ambiguity and confusion. • The developed assessment framework clarifies connections between assessment tools. • Broadening LCA, key aspects are metric and data requirements. • Broadening LCC, key aspects are scope, time frame and discounting. • Broadening CBA, focus point, timespan, references, labor and scarcity are key.« less
Life cycle assessment study of a Chinese desktop personal computer.
Duan, Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li, Jinhui
2009-02-15
Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps--i.e. the end of life phase--lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study.
Zhang, Yi; Baral, Anil; Bakshi, Bhavik R
2010-04-01
Despite the essential role of ecosystem goods and services in sustaining all human activities, they are often ignored in engineering decision making, even in methods that are meant to encourage sustainability. For example, conventional Life Cycle Assessment focuses on the impact of emissions and consumption of some resources. While aggregation and interpretation methods are quite advanced for emissions, similar methods for resources have been lagging, and most ignore the role of nature. Such oversight may even result in perverse decisions that encourage reliance on deteriorating ecosystem services. This article presents a step toward including the direct and indirect role of ecosystems in LCA, and a hierarchical scheme to interpret their contribution. The resulting Ecologically Based LCA (Eco-LCA) includes a large number of provisioning, regulating, and supporting ecosystem services as inputs to a life cycle model at the process or economy scale. These resources are represented in diverse physical units and may be compared via their mass, fuel value, industrial cumulative exergy consumption, or ecological cumulative exergy consumption or by normalization with total consumption of each resource or their availability. Such results at a fine scale provide insight about relative resource use and the risk and vulnerability to the loss of specific resources. Aggregate indicators are also defined to obtain indices such as renewability, efficiency, and return on investment. An Eco-LCA model of the 1997 economy is developed and made available via the web (www.resilience.osu.edu/ecolca). An illustrative example comparing paper and plastic cups provides insight into the features of the proposed approach. The need for further work in bridging the gap between knowledge about ecosystem services and their direct and indirect role in supporting human activities is discussed as an important area for future work.
Kim, Tae Hyoung; Tae, Sung Ho
2016-11-02
This study aims to develop a system for assessing the impact of the substances discharged from concrete production process on six environmental impact categories, i.e., global warming (GWP), acidification (AP), eutrophication (EP), abiotic depletion (ADP), ozone depletion (ODP), and photochemical oxidant creation (POCP), using the life a cycle assessment (LCA) method. To achieve this, this study proposed an LCA method specifically applicable to the Korean concrete industry by adapting the ISO standards to suit the Korean situations. The proposed LCA method involves a system that performs environmental impact assessment on the basis of input information on concrete mix design, transport distance, and energy consumption in a batch plant. The Concrete Lifecycle Assessment System (CLAS) thus developed provides user-friendly support for environmental impact assessment with specialized database for concrete mix materials and energy sources. In the case analysis using the CLAS, among the substances discharged from the production of 24 MPa concrete, those contributing to GWP, AP, EP, ADP, ODP, and POCP were assessed to amount to 309 kg-CO₂ eq/m³, 28.7 kg-SO₂ eq/m³, 5.21 kg-PO₄ 3- eq/m³, 0.000049 kg-CFC 11 eq/m³, 34 kg/m³, and 21 kg-Ethylene eq/m³, respectively. Of these six environmental impact categories selected for the LCA in this study, ordinary Portland cement (OPC) was found to contribute most intensely to GWP and POCP, and aggregates, to AP, EP, ODP, and ADP. It was also found that the mix design with increased prop proportion of recycled aggregate was found to contribute to reducing the impact in all other categories.
NASA Astrophysics Data System (ADS)
Naldesi, Luciano; Buttol, Patrizia; Masoni, Paolo; Misceo, Monica; Sára, Balázs
2004-12-01
"eLCA" is a European Commission financed project aimed at realising "On line green tools and services for Small and Medium-sized Enterprises (SMEs)". Knowledge and use of Life Cycle Assessment (LCA) by SMEs are strategic to introduce the Integrated Product Policy (IPP) in Europe, but methodology simplification is needed. LCA requires a large amount of validated general and sector specific data. Since their availability and cost can be insuperable barriers for SMEs, pre-elaborated data/meta-data, use of standards and low cost solutions are required. Within the framework of the eLCA project an LCA software - eVerdEE - based on a simplified methodology and specialised for SMEs has been developed. eVerdEE is a web-based tool with some innovative features. Its main feature is the adaptation of ISO 14040 requirements to offer easy-to-handle functions with solid scientific bases. Complex methodological problems, such as the system boundaries definition, the data quality estimation and documentation, the choice of impact categories, are simplified according to the SMEs" needs. Predefined "Goal and Scope definition" and "Inventory" forms, a user-friendly and well structured procedure are time and cost-effective. The tool is supported by a database containing pre-elaborated environmental indicators of substances and processes for different impact categories. The impact assessment is calculated automatically by using the user"s input and the database values. The results have different levels of interpretation in order to identify the life cycle critical points and the improvement options. The use of a target plot allows the direct comparison of different design alternatives.
A framework for energy use indicators and their reporting in life cycle assessment.
Arvidsson, Rickard; Svanström, Magdalena
2016-07-01
Energy use is a common impact category in life cycle assessment (LCA). Many different energy use indicators are used in LCA studies, accounting for energy use in different ways. Often, however, the choice behind which energy use indicator is applied is poorly described and motivated. To contribute to a more purposeful selection of energy use indicators and to ensure consistent and transparent reporting of energy use in LCA, a general framework for energy use indicator construction and reporting in LCA studies will be presented in this article. The framework differentiates between 1) renewable and nonrenewable energies, 2) primary and secondary energies, and 3) energy intended for energy purposes versus energy intended for material purposes. This framework is described both graphically and mathematically. Furthermore, the framework is illustrated through application to a number of energy use indicators that are frequently used in LCA studies: cumulative energy demand (CED), nonrenewable cumulative energy demand (NRCED), fossil energy use (FEU), primary fossil energy use (PFEU), and secondary energy use (SEU). To illustrate how the application of different energy use indicators may lead to different results, cradle-to-gate energy use of the bionanomaterial cellulose nanofibrils (CNF) is assessed using 5 different indicators and showing a factor of 3 differences between the highest and lowest results. The relevance of different energy use indicators to different actors and contexts will be discussed, and further developments of the framework are then suggested. Integr Environ Assess Manag 2016;12:429-436. © 2015 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC. © 2015 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC.
Industrious leaf cutter ants and their carbon footprints
NASA Astrophysics Data System (ADS)
Swanson, A. C.; Dierick, D.; Trahan, N. A.; Allen, M. F.; Schwendenmann, L.; Harmon, T. C.; Oberbauer, S. F.; Fernandez Bou, A. S.; Zelikova, T. J.
2017-12-01
Leaf cutter ants (LCA) are considered ecosystem engineers in Neotropical forest ecosystems because they alter physical and environmental conditions for other organisms. LCA excavate large underground nests, maintaining intricate tunnels and fungal and waste chambers, and they continuously bring in vast amounts of fresh leaf material. In order to understand their ecosystem-wide impacts, we set out to determine whether their engineering activities fundamentally alter soil structure, soil nutrient pools, and gas fluxes in a wet tropical rainforest in Costa Rica. To directly compare LCA nest to non-nest sites, we utilized embedded sensor arrays with series of soil moisture, CO2, O2, and temperature sensors placed at four soil depths and automated minirhizotrons (AMR) to measure root and hyphal production and turnover. We also collected soils for biogeochemical analyses and measured soil CO2 fluxes and carbon isotope ratios of below-ground CO2 for two years. Our measurements confirmed that LCA alter their soil environment to regulate internal soil CO2 concentrations, moisture, and temperature, increasing O2 concentrations in the process. There were marked differences in soil structure inside nests relative to non-nests and these were associated with increased root and hyphal production and turnover in nests. Soil C, N, P, and their respective degrading enzymes were highly variable among sites and between nests and controls but N and P increased with soil depth and were generally higher in nests than controls. Contrary to our expectations, C mineralization rates were lower in nests but CO2 fluxes were high from nest vents and similar to non-nests elsewhere. At the system scale, LCA appear to fundamentally change the soil environment inside their nests and create spatial heterogeneity in biogeochemical processes and root and hyphal growth, influencing the overall C balance of Neotropical forests.
Life cycle assessment of TV sets in China: A case study of the impacts of CRT monitors
DOE Office of Scientific and Technical Information (OSTI.GOV)
Song Qingbin; Wang Zhishi, E-mail: zswang@umac.mo; Li Jinhui
2012-10-15
Along with the rapid increase in both production and use of TV sets in China, there is an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of these sets. This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese TV sets. An assessment of the TV set device (focusing on the Cathode Ray Tube (CRT) monitor) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software versionmore » 7.2 and expressed with the Eco-indicator' 99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the CML method was used in order to estimate the influence of the choice of the assessment method on the results. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations on the current Chinese situation. The established LCA study shows that the use stage of such devices has the highest environmental impact, followed by the manufacturing stage. In the manufacturing stage, the CRT and the Printed Circuit Board (PCB) are those components contributing the most environmental impacts. During the use phase, the environmental impacts are due entirely to the methods of electricity generation used to run them, since no other aspects were taken into account for this phase. The final processing step-the end-of-life stage-can lead to a clear environmental benefit when the TV sets are processed through the formal dismantling enterprises in China.« less
Sparrevik, Magnus; Saloranta, Tuomo; Cornelissen, Gerard; Eek, Espen; Fet, Annik Magerholm; Breedveld, Gijs D; Linkov, Igor
2011-05-15
Ecological and human risks often drive the selection of remedial alternatives for contaminated sediments. Traditional human and ecological risk assessment (HERA) includes assessing risk for benthic organisms and aquatic fauna associated with exposure to contaminated sediments before and after remediation as well as risk for human exposure but does not consider the environmental footprint associated with implementing remedial alternatives. Assessment of environmental effects over the whole life cycle (i.e., Life Cycle Assessment, LCA) could complement HERA and help in selecting the most appropriate sediment management alternative. Even though LCA has been developed and applied in multiple environmental management cases, applications to contaminated sediments and marine ecosystems are in general less frequent. This paper implements LCA methodology for the case of the polychlorinated dibenzo-p-dioxins and -furans (PCDD/F)-contaminated Grenland fjord in Norway. LCA was applied to investigate the environmental footprint of different active and passive thin-layer capping alternatives as compared to natural recovery. The results showed that capping was preferable to natural recovery when analysis is limited to effects related to the site contamination. Incorporation of impacts related to the use of resources and energy during the implementation of a thin layer cap increase the environmental footprint by over 1 order of magnitude, making capping inferior to the natural recovery alternative. Use of biomass-derived activated carbon, where carbon dioxide is sequestered during the production process, reduces the overall environmental impact to that of natural recovery. The results from this study show that LCA may be a valuable tool for assessing the environmental footprint of sediment remediation projects and for sustainable sediment management.
Light Weight Ceramic Ablators for Mars Follow-on Mission Vehicle Thermal Protection System
NASA Technical Reports Server (NTRS)
Tran, Huy K.; Rasky, Daniel J.; Hsu, Ming-Ta; Turan, Ryan
1994-01-01
New Light Weight Ceramic Ablators (LCA) were produced by using ceramic and carbon fibrous substrates, impregnated with silicone and phenolic resins. The special infiltration techniques (patent pending) were developed to control the amount of organic resins in the highly porous fiber matrices so that the final densities of LCA's range from 0.22 to 0.24 g/cc. This paper presents the thermal and ablative performance of the Silicone Impregnated Reusable Ceramic Ablators (SIRCA) in simulated entry conditions for Mars-Pathfinder in the Ames 60 MW Interaction Heating Facility (I HF). Arc jet test results yielded no evidence of char erosion and mass loss at high stagnation pressures to 0.25 atm. Minimal silica melt was detected on surface char at a stagnation pressure of 0.31 atm. Four ceramic substrates were used in the production of SIRCA's to obtain the effective of boron oxide present in substrate so the thermal performance of SIRCA's. A sample of SIRCA was also exposed to the same heating condition for five cycles and no significant mass loss or recession was observed. Tensile testing established that the SIRCA tensile strength is about a factor of two higher than that of the virgin substrates. Thermogravimetric Analysis (TGA) of the char in nitrogen and air showed no evidence of free carbon in the char. Scanning Electron Microscopy of the post test sample showed that the char surface consists of a fibrous structure that was sealed with a thin layer of silicon oxide melt.
Bayesian Latent Class Analysis Tutorial.
Li, Yuelin; Lord-Bessen, Jennifer; Shiyko, Mariya; Loeb, Rebecca
2018-01-01
This article is a how-to guide on Bayesian computation using Gibbs sampling, demonstrated in the context of Latent Class Analysis (LCA). It is written for students in quantitative psychology or related fields who have a working knowledge of Bayes Theorem and conditional probability and have experience in writing computer programs in the statistical language R . The overall goals are to provide an accessible and self-contained tutorial, along with a practical computation tool. We begin with how Bayesian computation is typically described in academic articles. Technical difficulties are addressed by a hypothetical, worked-out example. We show how Bayesian computation can be broken down into a series of simpler calculations, which can then be assembled together to complete a computationally more complex model. The details are described much more explicitly than what is typically available in elementary introductions to Bayesian modeling so that readers are not overwhelmed by the mathematics. Moreover, the provided computer program shows how Bayesian LCA can be implemented with relative ease. The computer program is then applied in a large, real-world data set and explained line-by-line. We outline the general steps in how to extend these considerations to other methodological applications. We conclude with suggestions for further readings.
Obesity and Cigarette Smoking: Extending the Link to E cigarette/Vaping Use
Lanza, H. Isabella; Pittman, Patricia; Batshoun, Jennifer
2017-01-01
Objectives In recent years, electronic tobacco (e-cigarette/vaping) use among young adults has grown exponentially. Given past research linking obesity and cigarette smoking, assessing whether this relationship extends to electronic tobacco use is warranted. The current study examined weight status as a correlate of substance use patterns reflecting electronic tobacco use. Methods Survey data were collected from a convenience sample of 452 (59% female) undergraduates attending a large, public university during the 2015–2016 academic year. Latent class analysis (LCA) was conducted to identify substance use classes and examine weight status as a covariate of class membership. Results LCA analyses identified 4 classes: High Substance Use (19%), Risky Alcohol Use (14%), Cigarette/Electronic Tobacco Use (17%), and Low Substance Use (50%). Both obesity status and greater deviation from one’s group body mass index (BMI) norm were associated with a higher likelihood of belonging to the Cigarette/Electronic Tobacco Use class. Conclusions Findings suggest that electronic tobacco use may fit well into previously established relationships between higher weight status and tobacco use. Future research should examine the longitudinal processes and pathways underlying the relationship between weight status and electronic tobacco use. PMID:28376978
Application of Life Cycle Assessment (LCA) in Sugar Industries
NASA Astrophysics Data System (ADS)
Astuti, Arieyanti Dwi; Astuti, Rahayu Siwi Dwi; Hadiyanto, Hadiyanto
2018-02-01
Sugar is one of the main commodities that are needed for human life. The demand of sugar is very high with the trend increase from year to year. This condition makes the sugar industry become a leading industry that must be maintained sustainability. The sustainability of the sugar industry is influenced by the use of energy and natural resources and the resulting environmental impacts. Therefore, an effort is needed to analyze the environmental aspects and potential environmental impacts resulting from a product (sugar), by using Life Cycle Assessment (LCA). LCA is a very important tool for the analysis of a process/system from its cradle to grave. This technique is very useful in the estimation of energy usage and environmental load of a product/system. This paper aims to describe the main elements of sugar industries using Life Cycle Assessment.
Optimal Computing Budget Allocation for Particle Swarm Optimization in Stochastic Optimization.
Zhang, Si; Xu, Jie; Lee, Loo Hay; Chew, Ek Peng; Wong, Wai Peng; Chen, Chun-Hung
2017-04-01
Particle Swarm Optimization (PSO) is a popular metaheuristic for deterministic optimization. Originated in the interpretations of the movement of individuals in a bird flock or fish school, PSO introduces the concept of personal best and global best to simulate the pattern of searching for food by flocking and successfully translate the natural phenomena to the optimization of complex functions. Many real-life applications of PSO cope with stochastic problems. To solve a stochastic problem using PSO, a straightforward approach is to equally allocate computational effort among all particles and obtain the same number of samples of fitness values. This is not an efficient use of computational budget and leaves considerable room for improvement. This paper proposes a seamless integration of the concept of optimal computing budget allocation (OCBA) into PSO to improve the computational efficiency of PSO for stochastic optimization problems. We derive an asymptotically optimal allocation rule to intelligently determine the number of samples for all particles such that the PSO algorithm can efficiently select the personal best and global best when there is stochastic estimation noise in fitness values. We also propose an easy-to-implement sequential procedure. Numerical tests show that our new approach can obtain much better results using the same amount of computational effort.
Optimal Computing Budget Allocation for Particle Swarm Optimization in Stochastic Optimization
Zhang, Si; Xu, Jie; Lee, Loo Hay; Chew, Ek Peng; Chen, Chun-Hung
2017-01-01
Particle Swarm Optimization (PSO) is a popular metaheuristic for deterministic optimization. Originated in the interpretations of the movement of individuals in a bird flock or fish school, PSO introduces the concept of personal best and global best to simulate the pattern of searching for food by flocking and successfully translate the natural phenomena to the optimization of complex functions. Many real-life applications of PSO cope with stochastic problems. To solve a stochastic problem using PSO, a straightforward approach is to equally allocate computational effort among all particles and obtain the same number of samples of fitness values. This is not an efficient use of computational budget and leaves considerable room for improvement. This paper proposes a seamless integration of the concept of optimal computing budget allocation (OCBA) into PSO to improve the computational efficiency of PSO for stochastic optimization problems. We derive an asymptotically optimal allocation rule to intelligently determine the number of samples for all particles such that the PSO algorithm can efficiently select the personal best and global best when there is stochastic estimation noise in fitness values. We also propose an easy-to-implement sequential procedure. Numerical tests show that our new approach can obtain much better results using the same amount of computational effort. PMID:29170617
Tonini, Davide; Hamelin, Lorie; Wenzel, Henrik; Astrup, Thomas
2012-12-18
In the endeavor of optimizing the sustainability of bioenergy production in Denmark, this consequential life cycle assessment (LCA) evaluated the environmental impacts associated with the production of heat and electricity from one hectare of Danish arable land cultivated with three perennial crops: ryegrass (Lolium perenne), willow (Salix viminalis) and Miscanthus giganteus. For each, four conversion pathways were assessed against a fossil fuel reference: (I) anaerobic co-digestion with manure, (II) gasification, (III) combustion in small-to-medium scale biomass combined heat and power (CHP) plants and IV) co-firing in large scale coal-fired CHP plants. Soil carbon changes, direct and indirect land use changes as well as uncertainty analysis (sensitivity, MonteCarlo) were included in the LCA. Results showed that global warming was the bottleneck impact, where only two scenarios, namely willow and Miscanthus co-firing, allowed for an improvement as compared with the reference (-82 and -45 t CO₂-eq. ha⁻¹, respectively). The indirect land use changes impact was quantified as 310 ± 170 t CO₂-eq. ha⁻¹, representing a paramount average of 41% of the induced greenhouse gas emissions. The uncertainty analysis confirmed the results robustness and highlighted the indirect land use changes uncertainty as the only uncertainty that can significantly change the outcome of the LCA results.
Regional characterization of freshwater Use in LCA: modeling direct impacts on human health.
Boulay, Anne-Marie; Bulle, Cécile; Bayart, Jean-Baptiste; Deschênes, Louise; Margni, Manuele
2011-10-15
Life cycle assessment (LCA) is a methodology that quantifies potential environmental impacts for comparative purposes in a decision-making context. While potential environmental impacts from pollutant emissions into water are characterized in LCA, impacts from water unavailability are not yet fully quantified. Water use can make the resource unavailable to other users by displacement or quality degradation. A reduction in water availability to human users can potentially affect human health. If financial resources are available, there can be adaptations that may, in turn, shift the environmental burdens to other life cycle stages and impact categories. This paper proposes a model to evaluate these potential impacts in an LCA context. It considers the water that is withdrawn and released, its quality and scarcity in order to evaluate the loss of functionality associated with water uses. Regionalized results are presented for impacts on human health for two modeling approaches regarding affected users, including or not domestic uses, and expressed in disability-adjusted life years (DALY). A consumption and quality based scarcity indicator is also proposed as a midpoint. An illustrative example is presented for the production of corrugated board with different effluents, demonstrating the importance of considering quality, process effluents and the difference between the modeling approaches.
Laratte, Bertrand; Guillaume, Bertrand; Kim, Junbeum; Birregah, Babiga
2014-05-15
This paper aims at presenting a dynamic indicator for life cycle assessment (LCA) measuring cumulative impacts over time of greenhouse gas (GHG) emissions from fertilizers used for wheat cultivation and production. Our approach offers a dynamic indicator of global warming potential (GWP), one of the most used indicator of environmental impacts (e.g. in the Kyoto Protocol). For a case study, the wheat production in France was selected and considered by using data from official sources about fertilizer consumption and production of wheat. We propose to assess GWP environmental impact based on LCA method. The system boundary is limited to the fertilizer production for 1 ton of wheat produced (functional unit) from 1910 to 2010. As applied to wheat production in France, traditional LCA shows a maximum GWP impact of 500 kg CO2-eq for 1 ton of wheat production, whereas the GWP impact of wheat production over time with our approach to dynamic LCA and its cumulative effects increases to 18,000 kg CO2-eq for 1 ton of wheat production. In this paper, only one substance and one impact assessment indicator are presented. However, the methodology can be generalized and improved by using different substances and indicators. Copyright © 2014 Elsevier B.V. All rights reserved.
2012-01-01
To build a life cycle assessment (LCA) database of Japanese products embracing their global supply chains in a manner requiring lower time and labor burdens, this study estimates the intensity of embodied global environmental burden for commodities produced in Japan. The intensity of embodied global environmental burden is a measure of the environmental burden generated globally by unit production of the commodity and can be used as life cycle inventory data in LCA. The calculation employs an input–output LCA method with a global link input–output model that defines a global system boundary grounded in a simplified multiregional input–output framework. As results, the intensities of embodied global environmental burden for 406 Japanese commodities are determined in terms of energy consumption, greenhouse-gas emissions (carbon dioxide, methane, nitrous oxide, perfluorocarbons, hydrofluorocarbons, sulfur hexafluoride, and their summation), and air-pollutant emissions (nitrogen oxide and sulfur oxide). The uncertainties in the intensities of embodied global environmental burden attributable to the simplified structure of the global link input–output model are quantified using Monte Carlo simulation. In addition, by analyzing the structure of the embodied global greenhouse-gas intensities we characterize Japanese commodities in the context of LCA embracing global supply chains. PMID:22881452
Laukkanen, Anne-Maria; Titze, Ingo R.; Hoffman, Henry; Finnegan, Eileen
2015-01-01
Voice training exploits semiocclusives, which increase vocal tract interaction with the source. Modeling results suggest that vocal economy (maximum flow declination rate divided by maximum area declination rate, MADR) is improved by matching the glottal and vocal tract impedances. Changes in MADR may be correlated with thyroarytenoid (TA) muscle activity. Here the effects of impedance matching are studied for laryngeal muscle activity and glottal resistance. One female repeated [pa:p:a] before and immediately after (a) phonation into different-sized tubes and (b) voiced bilabial fricative [β:]. To allow estimation of subglottic pressure from the oral pressure, [p] was inserted also in the repetitions of the semiocclusions. Airflow was registered using a flow mask. EMG was registered from TA, cricothyroid (CT) and lateral cricoarytenoid (LCA) muscles. Phonation was simulated using a 7 × 5 × 5 point-mass model of the vocal folds, allowing inputs of simulated laryngeal muscle activation. The variables were TA, CT and LCA activities. Increased vocal tract impedance caused the subject to raise TA activity compared to CT and LCA activities. Computer simulation showed that higher glottal economy and efficiency (oral radiated power divided by aerodynamic power) were obtained with a higher TA/CT ratio when LCA activity was tuned for ideal adduction. PMID:19011306
Chhetri, Dinesh K.; Neubauer, Juergen; Sofer, Elazar; Berry, David A.
2014-01-01
The interactions of the intrinsic laryngeal muscles (ILMs) in controlling fundamental frequency (F0) and glottal posture remain unclear. In an in vivo canine model, three sets of intrinsic laryngeal muscles—the thyroarytenoid (TA), cricothyroid (CT), and lateral cricoarytenoid plus interarytenoid (LCA/IA) muscle complex—were independently and accurately stimulated in a graded manner using distal laryngeal nerve stimulation. Graded neuromuscular stimulation was used to independently activate these paired intrinsic laryngeal muscles over a range from threshold to maximal activation, to produce 320 distinct laryngeal phonatory postures. At phonation onset these activation conditions were evaluated in terms of their vocal fold strain, glottal width at the vocal processes, fundamental frequency (F0), subglottic pressure, and airflow. F0 ranged from 69 to 772 Hz and clustered into chest-like and falsetto-like groups. CT activation was always required to raise F0, but could also lower F0 at low TA and LCA/IA activation levels. Increasing TA activation first increased then decreased F0 in all CT and LCA/IA activation conditions. Increasing TA activation also facilitated production of high F0 at a lower onset pressure. Independent control of membranous (TA) and cartilaginous (LCA/IA) glottal closure enabled multiple pathways for F0 control via changes in glottal posture. PMID:25235003
Direct and indirect generation of waste in the Spanish paper industry.
Ruiz Peñalver, Soraya María; Rodríguez Molina, Mercedes; Camacho Ballesta, José Antonio
2014-01-01
The paper industry has a relatively high degree of reliance on suppliers when compared to other industries. Exploring the role of the paper industry in terms of consumption of intermediate inputs from other industries may help to understand how the production of paper does not only generate waste by itself but also affects the amount of waste generated by other industries. The product Life Cycle Assessment (LCA) is a useful analytical tool to examine and assess environmental impacts over the entire life cycle of a product "from cradle to grave" but it is costly and time intensive. In contrast, Economic Input Output Life Cycle Assessment Models (IO-LCA) that combine LCA with Input-Output analysis (IO) are more accurate and less expensive, as they employ publicly available data. This paper represents one of the first Spanish studies aimed at estimating the waste generated in the production of paper by applying IO-LCA. One of the major benefits is the derivation of the contribution of direct and indirect suppliers to the paper industry. The results obtained show that there was no direct relationship between the impact on output and the impact on waste generation exerted by the paper industry. The major contributors to waste generation were the mining industry and the forestry industry. Copyright © 2013 Elsevier Ltd. All rights reserved.
Lifecycle analysis for automobiles: Uses and limitations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gaines, L.; Stodolsky, F.
There has been a recent trend toward the use of lifecycle analysis (LCA) as a decision-making tool for the automotive industry. However, the different practitioners` methods and assumptions vary widely, as do the interpretations put on the results. The lack of uniformity has been addressed by such groups as the Society of Environmental Toxicology and Chemistry (SETAC) and the International Organization for Standardization (ISO), but standardization of methodology assures neither meaningful results nor appropriate use of the results. This paper examines the types of analysis that are possible for automobiles, explains possible pitfalls to be avoided, and suggests ways thatmore » LCA can be used as part of a rational decision-making procedure. The key to performing a useful analysis is identification of the factors that will actually be used in making the decision. It makes no sense to analyze system energy use in detail if direct financial cost is to be the decision criterion. Criteria may depend on who is making the decision (consumer, producer, regulator). LCA can be used to track system performance for a variety of criteria, including emissions, energy use, and monetary costs, and these can have spatial and temporal distributions. Because optimization of one parameter is likely to worsen another, identification of trade-offs is an important function of LCA.« less
Detailed Life Cycle Assessment of Bounty Paper Towel ...
Life Cycle Assessment (LCA) is a well-established and informative method of understanding the environmental impacts of consumer products across the entire value chain. However, companies committed to sustainability are interested in more methods that examine their products and activities' impacts. Methods that build on LCA strengths and illuminate other connected but less understood facets, related to social and economic impacts, would provide greater value to decision-makers. This study is a LCA that calculates the potential impacts associated with Bounty® paper towels from two facilities with different production lines, an older one (Albany, Georgia) representing established technology and the other (Box Elder, Utah), a newer state-of-the-art platform. This is unique in that it includes use of Industrial Process Systems Assessment (IPSA), new electricity and pulp data, modeled in open source software, and is the basis for the development of new integrated sustainability metrics (published separately). The new metrics can guide supply chain and manufacturing enhancements, and product design related to environmental protection and resource sustainability. Results of the LCA indicate Box Elder had improvements on environmental impact scores related to air emission indicators, except for particulate matter. Albany had lower water use impacts. After normalization of the results, fossil fuel depletion is the most critical environmental indicator. Pulp production, e
A non-linear dimension reduction methodology for generating data-driven stochastic input models
NASA Astrophysics Data System (ADS)
Ganapathysubramanian, Baskar; Zabaras, Nicholas
2008-06-01
Stochastic analysis of random heterogeneous media (polycrystalline materials, porous media, functionally graded materials) provides information of significance only if realistic input models of the topology and property variations are used. This paper proposes a framework to construct such input stochastic models for the topology and thermal diffusivity variations in heterogeneous media using a data-driven strategy. Given a set of microstructure realizations (input samples) generated from given statistical information about the medium topology, the framework constructs a reduced-order stochastic representation of the thermal diffusivity. This problem of constructing a low-dimensional stochastic representation of property variations is analogous to the problem of manifold learning and parametric fitting of hyper-surfaces encountered in image processing and psychology. Denote by M the set of microstructures that satisfy the given experimental statistics. A non-linear dimension reduction strategy is utilized to map M to a low-dimensional region, A. We first show that M is a compact manifold embedded in a high-dimensional input space Rn. An isometric mapping F from M to a low-dimensional, compact, connected set A⊂Rd(d≪n) is constructed. Given only a finite set of samples of the data, the methodology uses arguments from graph theory and differential geometry to construct the isometric transformation F:M→A. Asymptotic convergence of the representation of M by A is shown. This mapping F serves as an accurate, low-dimensional, data-driven representation of the property variations. The reduced-order model of the material topology and thermal diffusivity variations is subsequently used as an input in the solution of stochastic partial differential equations that describe the evolution of dependant variables. A sparse grid collocation strategy (Smolyak algorithm) is utilized to solve these stochastic equations efficiently. We showcase the methodology by constructing low-dimensional input stochastic models to represent thermal diffusivity in two-phase microstructures. This model is used in analyzing the effect of topological variations of two-phase microstructures on the evolution of temperature in heat conduction processes.
Monte Carlo simulation of induction time and metastable zone width; stochastic or deterministic?
NASA Astrophysics Data System (ADS)
Kubota, Noriaki
2018-03-01
The induction time and metastable zone width (MSZW) measured for small samples (say 1 mL or less) both scatter widely. Thus, these two are observed as stochastic quantities. Whereas, for large samples (say 1000 mL or more), the induction time and MSZW are observed as deterministic quantities. The reason for such experimental differences is investigated with Monte Carlo simulation. In the simulation, the time (under isothermal condition) and supercooling (under polythermal condition) at which a first single crystal is detected are defined as the induction time t and the MSZW ΔT for small samples, respectively. The number of crystals just at the moment of t and ΔT is unity. A first crystal emerges at random due to the intrinsic nature of nucleation, accordingly t and ΔT become stochastic. For large samples, the time and supercooling at which the number density of crystals N/V reaches a detector sensitivity (N/V)det are defined as t and ΔT for isothermal and polythermal conditions, respectively. The points of t and ΔT are those of which a large number of crystals have accumulated. Consequently, t and ΔT become deterministic according to the law of large numbers. Whether t and ΔT may stochastic or deterministic in actual experiments should not be attributed to change in nucleation mechanisms in molecular level. It could be just a problem caused by differences in the experimental definition of t and ΔT.
IMPLICIT DUAL CONTROL BASED ON PARTICLE FILTERING AND FORWARD DYNAMIC PROGRAMMING.
Bayard, David S; Schumitzky, Alan
2010-03-01
This paper develops a sampling-based approach to implicit dual control. Implicit dual control methods synthesize stochastic control policies by systematically approximating the stochastic dynamic programming equations of Bellman, in contrast to explicit dual control methods that artificially induce probing into the control law by modifying the cost function to include a term that rewards learning. The proposed implicit dual control approach is novel in that it combines a particle filter with a policy-iteration method for forward dynamic programming. The integration of the two methods provides a complete sampling-based approach to the problem. Implementation of the approach is simplified by making use of a specific architecture denoted as an H-block. Practical suggestions are given for reducing computational loads within the H-block for real-time applications. As an example, the method is applied to the control of a stochastic pendulum model having unknown mass, length, initial position and velocity, and unknown sign of its dc gain. Simulation results indicate that active controllers based on the described method can systematically improve closed-loop performance with respect to other more common stochastic control approaches.
The phenotypic equilibrium of cancer cells: From average-level stability to path-wise convergence.
Niu, Yuanling; Wang, Yue; Zhou, Da
2015-12-07
The phenotypic equilibrium, i.e. heterogeneous population of cancer cells tending to a fixed equilibrium of phenotypic proportions, has received much attention in cancer biology very recently. In the previous literature, some theoretical models were used to predict the experimental phenomena of the phenotypic equilibrium, which were often explained by different concepts of stabilities of the models. Here we present a stochastic multi-phenotype branching model by integrating conventional cellular hierarchy with phenotypic plasticity mechanisms of cancer cells. Based on our model, it is shown that: (i) our model can serve as a framework to unify the previous models for the phenotypic equilibrium, and then harmonizes the different kinds of average-level stabilities proposed in these models; and (ii) path-wise convergence of our model provides a deeper understanding to the phenotypic equilibrium from stochastic point of view. That is, the emergence of the phenotypic equilibrium is rooted in the stochastic nature of (almost) every sample path, the average-level stability just follows from it by averaging stochastic samples. Copyright © 2015 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Levine, Zachary H.; Pintar, Adam L.
2015-11-01
A simple algorithm for averaging a stochastic sequence of 1D arrays in a moving, expanding window is provided. The samples are grouped in bins which increase exponentially in size so that a constant fraction of the samples is retained at any point in the sequence. The algorithm is shown to have particular relevance for a class of Monte Carlo sampling problems which includes one characteristic of iterative reconstruction in computed tomography. The code is available in the CPC program library in both Fortran 95 and C and is also available in R through CRAN.
Optimal regulation in systems with stochastic time sampling
NASA Technical Reports Server (NTRS)
Montgomery, R. C.; Lee, P. S.
1980-01-01
An optimal control theory that accounts for stochastic variable time sampling in a distributed microprocessor based flight control system is presented. The theory is developed by using a linear process model for the airplane dynamics and the information distribution process is modeled as a variable time increment process where, at the time that information is supplied to the control effectors, the control effectors know the time of the next information update only in a stochastic sense. An optimal control problem is formulated and solved for the control law that minimizes the expected value of a quadratic cost function. The optimal cost obtained with a variable time increment Markov information update process where the control effectors know only the past information update intervals and the Markov transition mechanism is almost identical to that obtained with a known and uniform information update interval.
A stochastic diffusion process for Lochner's generalized Dirichlet distribution
Bakosi, J.; Ristorcelli, J. R.
2013-10-01
The method of potential solutions of Fokker-Planck equations is used to develop a transport equation for the joint probability of N stochastic variables with Lochner’s generalized Dirichlet distribution as its asymptotic solution. Individual samples of a discrete ensemble, obtained from the system of stochastic differential equations, equivalent to the Fokker-Planck equation developed here, satisfy a unit-sum constraint at all times and ensure a bounded sample space, similarly to the process developed in for the Dirichlet distribution. Consequently, the generalized Dirichlet diffusion process may be used to represent realizations of a fluctuating ensemble of N variables subject to a conservation principle.more » Compared to the Dirichlet distribution and process, the additional parameters of the generalized Dirichlet distribution allow a more general class of physical processes to be modeled with a more general covariance matrix.« less
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, technicians remove the cover on the Load Control Assembly-2 (LCA-2) to begin the testing process. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, technicians begin the testing process on the Load Control Assembly-2 (LCA-2) after the cover has been removed. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, the Load Control Assembly-2 (LCA-2) is uncovered for testing. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, the Load Control Assembly-2 (LCA-2) is uncovered for testing. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, the Load Control Assembly-2 (LCA-2) is uncovered for testing. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, technicians begin the testing process on the Load Control Assembly-2 (LCA-2) after the cover has been removed. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, technicians remove the cover on the Load Control Assembly-2 (LCA-2) to begin the testing process. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, technicians begin the testing process on the Load Control Assembly-2 (LCA-2) after the cover has been removed. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
2011-05-03
CAPE CANAVERAL, Fla. -- At the NASA Shuttle Logistics Depot in Cape Canaveral, Florida, technicians carefully remove the Load Control Assembly-2 (LCA-2) from a cart for testing. Located in space shuttle Endeavour's aft avionics bay 5, the LCA-2, which distributes power to nine shuttle systems, is believed to have caused fuel line heaters for Endeavour's auxiliary power unit-1 (APU-1) to fail April 29 during the first launch attempt for the STS-134 mission. The LCA-2 will be replaced and systems will be retested before the launch is rescheduled. STS-134 will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank and additional spare parts for the Dextre robotic helper to the International Space Station. The mission also will be the final spaceflight for Endeavour. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett
Life cycle assessment of bioenergy systems: state of the art and future challenges.
Cherubini, Francesco; Strømman, Anders Hammer
2011-01-01
The use of different input data, functional units, allocation methods, reference systems and other assumptions complicates comparisons of LCA bioenergy studies. In addition, uncertainties and use of specific local factors for indirect effects (like land-use change and N-based soil emissions) may give rise to wide ranges of final results. In order to investigate how these key issues have been addressed so far, this work performs a review of the recent bioenergy LCA literature. The abundance of studies dealing with the different biomass resources, conversion technologies, products and environmental impact categories is summarized and discussed. Afterwards, a qualitative interpretation of the LCA results is depicted, focusing on energy balance, GHG balance and other impact categories. With the exception of a few studies, most LCAs found a significant net reduction in GHG emissions and fossil energy consumption when bioenergy replaces fossil energy. Copyright © 2010 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Park, Jin-Young; Lee, Dong-Eun; Kim, Byung-Soo
2017-10-01
Due to the increasing concern about climate change, efforts to reduce environmental load are continuously being made in construction industry, and LCA (life cycle assessment) is being presented as an effective method to assess environmental load. Since LCA requires information on construction quantity used for environmental load estimation, however, it is not being utilized in the environmental review in the early design phase where it is difficult to obtain such information. In this study, computation system for construction quantity based on standard cross section of road drainage facilities was developed to compute construction quantity required for LCA using only information available in the early design phase to develop and verify the effectiveness of a model that can perform environmental load estimation. The result showed that it is an effective model that can be used in the early design phase as it revealed a 13.39% mean absolute error rate.
Numerical methods for stochastic differential equations
NASA Astrophysics Data System (ADS)
Kloeden, Peter; Platen, Eckhard
1991-06-01
The numerical analysis of stochastic differential equations differs significantly from that of ordinary differential equations due to the peculiarities of stochastic calculus. This book provides an introduction to stochastic calculus and stochastic differential equations, both theory and applications. The main emphasise is placed on the numerical methods needed to solve such equations. It assumes an undergraduate background in mathematical methods typical of engineers and physicists, through many chapters begin with a descriptive summary which may be accessible to others who only require numerical recipes. To help the reader develop an intuitive understanding of the underlying mathematicals and hand-on numerical skills exercises and over 100 PC Exercises (PC-personal computer) are included. The stochastic Taylor expansion provides the key tool for the systematic derivation and investigation of discrete time numerical methods for stochastic differential equations. The book presents many new results on higher order methods for strong sample path approximations and for weak functional approximations, including implicit, predictor-corrector, extrapolation and variance-reduction methods. Besides serving as a basic text on such methods. the book offers the reader ready access to a large number of potential research problems in a field that is just beginning to expand rapidly and is widely applicable.
2013-01-01
Background Life cycle assessment (LCA) is a systems-based method used to determine potential impacts to the environment associated with a product throughout its life cycle. Conclusions from LCA studies can be applied to support decisions regarding product design or public policy, therefore, all relevant inputs (e.g., raw materials, energy) and outputs (e.g., emissions, waste) to the product system should be evaluated to estimate impacts. Currently, work-related impacts are not routinely considered in LCA. The objectives of this paper are: 1) introduce the work environment disability-adjusted life year (WE-DALY), one portion of a characterization factor used to express the magnitude of impacts to human health attributable to work-related exposures to workplace hazards; 2) outline the methods for calculating the WE-DALY; 3) demonstrate the calculation; and 4) highlight strengths and weaknesses of the methodological approach. Methods The concept of the WE-DALY and the methodological approach to its calculation is grounded in the World Health Organization’s disability-adjusted life year (DALY). Like the DALY, the WE-DALY equation considers the years of life lost due to premature mortality and the years of life lived with disability outcomes to estimate the total number of years of healthy life lost in a population. The equation requires input in the form of the number of fatal and nonfatal injuries and illnesses that occur in the industries relevant to the product system evaluated in the LCA study, the age of the worker at the time of the fatal or nonfatal injury or illness, the severity of the injury or illness, and the duration of time lived with the outcomes of the injury or illness. Results The methodological approach for the WE-DALY requires data from various sources, multi-step instructions to determine each variable used in the WE-DALY equation, and assumptions based on professional opinion. Conclusions Results support the use of the WE-DALY in a characterization factor in LCA. Integrating occupational health into LCA studies will provide opportunities to prevent shifting of impacts between the work environment and the environment external to the workplace and co-optimize human health, to include worker health, and environmental health. PMID:23497039
NASA Astrophysics Data System (ADS)
Harmon, T. C.; Fernandez Bou, A. S.; Dierick, D.; Oberbauer, S. F.; Schwendenmann, L.; Swanson, A. C.; Zelikova, T. J.
2016-12-01
This project focuses on the role of leaf cutter ants (LCA) Atta cepholotes in carbon cycling in neotropical wet forests. LCA are abundant in these forests and workers cut and carry vegetation fragments to their nests, where symbiotic fungi break down the plant material and produce the fungal hyphae on which the ants feed. LCA are the dominant herbivores in tropical forest ecosystems, removing 10-50% of vegetation annually. Their nests can achieve large sizes, extending several meters belowground and covering 50 square meters or more of the forest floor. We monitored soil moisture, temperature, and soil CO2 concentrations continuously in nest and control sites at La Selva Biological Station, Costa Rica. Intermittently, we also assessed soil respiration and LCA nest vent fluxes. Observed soil CO2 concentrations varied markedly with soil moisture conditions, ranging from a few thousand to over 60,000 ppm(v). Accordingly, soil CO2 surface efflux varied temporally by an order of magnitude or more (typical range 0.5 to 5 mmol CO2 m-2 s-1) for the same location as a consequence of soil moisture fluctuations. LCA nest vents equivalent CO2 efflux rates (accounting for vent diameter) can be substantially greater than soil surface values, with observed values ranging from about 1 to 50 mmol m-2 s-1 (it is worth noting that correcting for vent diameters yields equivalent CO2 efflux rates greater than 1000 mmol m-2 s-1). Similar to the soil surface efflux, vent efflux varied temporally by factors of 3 or more, suggesting a potential link between the vent productivity and nest activity, moisture content of surrounding soil, and atmospheric conditions (e.g., air temperature, wind). Using a soil model (Hydrus-1D) to account for unsaturated flow, heat transfer, CO2 production and diffusive transport, we captured moisture and temperature dynamics and the order of magnitude of observed CO2 concentration. Modelled surface fluxes also agreed well with observed soil surface CO2 efflux. These results contribute to our understanding of CO2 production and transport in tropical soils, and the role played by the LCA in the soil carbon cycle.
Stochastic Mixing Model with Power Law Decay of Variance
NASA Technical Reports Server (NTRS)
Fedotov, S.; Ihme, M.; Pitsch, H.
2003-01-01
Here we present a simple stochastic mixing model based on the law of large numbers (LLN). The reason why the LLN is involved in our formulation of the mixing problem is that the random conserved scalar c = c(t,x(t)) appears to behave as a sample mean. It converges to the mean value mu, while the variance sigma(sup 2)(sub c) (t) decays approximately as t(exp -1). Since the variance of the scalar decays faster than a sample mean (typically is greater than unity), we will introduce some non-linear modifications into the corresponding pdf-equation. The main idea is to develop a robust model which is independent from restrictive assumptions about the shape of the pdf. The remainder of this paper is organized as follows. In Section 2 we derive the integral equation from a stochastic difference equation describing the evolution of the pdf of a passive scalar in time. The stochastic difference equation introduces an exchange rate gamma(sub n) which we model in a first step as a deterministic function. In a second step, we generalize gamma(sub n) as a stochastic variable taking fluctuations in the inhomogeneous environment into account. In Section 3 we solve the non-linear integral equation numerically and analyze the influence of the different parameters on the decay rate. The paper finishes with a conclusion.
Quasi-Monte Carlo Methods Applied to Tau-Leaping in Stochastic Biological Systems.
Beentjes, Casper H L; Baker, Ruth E
2018-05-25
Quasi-Monte Carlo methods have proven to be effective extensions of traditional Monte Carlo methods in, amongst others, problems of quadrature and the sample path simulation of stochastic differential equations. By replacing the random number input stream in a simulation procedure by a low-discrepancy number input stream, variance reductions of several orders have been observed in financial applications. Analysis of stochastic effects in well-mixed chemical reaction networks often relies on sample path simulation using Monte Carlo methods, even though these methods suffer from typical slow [Formula: see text] convergence rates as a function of the number of sample paths N. This paper investigates the combination of (randomised) quasi-Monte Carlo methods with an efficient sample path simulation procedure, namely [Formula: see text]-leaping. We show that this combination is often more effective than traditional Monte Carlo simulation in terms of the decay of statistical errors. The observed convergence rate behaviour is, however, non-trivial due to the discrete nature of the models of chemical reactions. We explain how this affects the performance of quasi-Monte Carlo methods by looking at a test problem in standard quadrature.
2010-03-01
AFIT/GEM/ENV/10-M01 Abstract Rising global energy demand and natural disasters continuously threaten energy supplies and prices. As a result , the...light bulbs. The study used the Process-Sum and Economic Input-Output Life-cycle Assessment (EIO- LCA ) methods. The results of the study found that... results for this phase of the analysis. Summary This chapter has detailed the methodology used in this study. Using both LCCA and EIO- LCA allowed for
Cellura, Maurizio; Ardente, Fulvio; Longo, Sonia
2012-01-01
In the present study, Life Cycle Assessment (LCA) methodology was applied to evaluate the energy consumption and environmental burdens associated with the production of protected crops in an agricultural district in the Mediterranean region. In this study, LCA was used as a 'support tool', to address local policies for sustainable production and consumption patterns, and to create a 'knowledge base' for environmental assessment of an extended agricultural production area. The proposed approach combines organisation-specific tools, such as Environmental Management Systems and Environmental Product Declarations, with the environmental management of the district. Questionnaires were distributed to producers to determine the life cycle of different protected crops (tomatoes, cherry tomatoes, peppers, melons and zucchinis), and obtain information on greenhouse usage (e.g. tunnel vs. pavilion). Ecoprofiles of products in the district were also estimated, to identify supply chain elements with the highest impact in terms of global energy requirements, greenhouse gas emissions, eutrophication, water consumption and waste production. These results of this study enable selection of the 'best practices' and ecodesign solutions, to reduce the environmental impact of these products. Finally, sensitivity analysis of key LCA issues was performed, to assess the variability associated with different parameters: vegetable production; water usage; fertiliser and pesticide usage; shared greenhouse use; substitution of plastics coverings; and waste recycling. Copyright © 2011 Elsevier Ltd. All rights reserved.
Subjective reactions to cocaine and marijuana are associated with abuse and dependence.
Grant, Julia D; Scherrer, Jeffrey F; Lyons, Michael J; Tsuang, Ming; True, William R; Bucholz, Kathleen K
2005-09-01
Subjective effects of marijuana and cocaine use are associated with amount of drug use and potentially with risk of abuse and dependence. We used Latent Class Analyses (LCA) to examine subjective responses to two categories of drugs and link these to abuse and dependence. In 1992, subjective responses were queried of 2506 marijuana and 661 cocaine lifetime users who were members of the Vietnam Era Twin Registry. LCA was used to identify classes of subjective effects. Multinomial logistic regression models were computed to test for an association between classes and marijuana and cocaine abuse or dependence. The best LCA solution for marijuana identified 6 distinct classes characterized as positive, relaxed, reactive, adverse, low and very reactive. The best LCA solution for cocaine identified 5 distinct classes characterized as positive, alert, adverse, low and very reactive. Marijuana abuse and dependence were significantly associated with each latent class. Cocaine abuse was associated with the reactive class (OR=3.9; 95% CI: 1.6-9.5). Cocaine dependence was associated with reactive (OR=15.3; 95% CI: 7.1-32.6), adverse (OR=9.7; 95% CI: 4.5-21.0) and very reactive (OR=18.7; 95% CI: 5.6-62.6) classes. We found evidence for both qualitative and quantitative subjective effect profiles. Subjective effects, both positive and adverse are associated with lifetime risk for marijuana and cocaine dependence.
Lithocholic acid is an endogenous inhibitor of MDM4 and MDM2
Vogel, Simon M.; Bauer, Matthias R.; Joerger, Andreas C.; Wilcken, Rainer; Brandt, Tobias; Veprintsev, Dmitry B.; Rutherford, Trevor J.; Fersht, Alan R.; Boeckler, Frank M.
2012-01-01
The proteins MDM2 and MDM4 are key negative regulators of the tumor suppressor protein p53, which are frequently upregulated in cancer cells. They inhibit the transactivation activity of p53 by binding separately or in concert to its transactivation domain. MDM2 is also a ubiquitin ligase that leads to the degradation of p53. Accordingly, MDM2 and MDM4 are important targets for drugs to inhibit their binding to p53. We found from in silico screening and confirmed by experiment that lithocholic acid (LCA) binds to the p53 binding sites of both MDM2 and MDM4 with a fivefold preference for MDM4. LCA is an endogenous steroidal bile acid, variously reported to have both carcinogenic and apoptotic activities. The comparison of LCA effects on apoptosis in HCT116 p53+/+ vs. p53-/- cells shows a predominantly p53-mediated induction of caspase-3/7. The dissociation constants are in the μM region, but only modest inhibition of binding of MDM2 and MDM4 is required to negate their upregulation because they have to compete with transcriptional coactivator p300 for binding to p53. Binding was weakened by structural changes in LCA, and so it may be a natural ligand of MDM2 and MDM4, raising the possibility that MDM proteins may be sensors for specific steroids. PMID:23035244
A Protocol for Lifetime Energy and Environmental Impact Assessment of Building Insulation Materials
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shrestha, Som S; Biswas, Kaushik; Desjarlais, Andre Omer
This article describes a proposed protocol that is intended to provide a comprehensive list of factors to be considered in evaluating the direct and indirect environmental impacts of building insulation materials, as well as detailed descriptions of standardized calculation methodologies to determine those impacts. The energy and environmental impacts of insulation materials can generally be divided into two categories: (1) direct impact due to the embodied energy of the insulation materials and other factors, and (2) indirect or environmental impacts avoided as a result of reduced building energy use due to addition of insulation. Standards and product category rules existmore » that provide guidelines about the life cycle assessment (LCA) of materials, including building insulation products. However, critical reviews have suggested that these standards fail to provide complete guidance to LCA studies and suffer from ambiguities regarding the determination of the environmental impacts of building insulation and other products. The focus of the assessment protocol described here is to identify all factors that contribute to the total energy and environmental impacts of different insulation products and, more importantly, provide standardized determination methods that will allow comparison of different insulation material types. Further, the intent is not to replace current LCA standards but to provide a well-defined, easy-to-use comparison method for insulation materials using existing LCA guidelines.« less
Significance of metabolites in bioequivalence: losartan potassium as a case study.
Charoo, Naseem Ahmad; Cristofoletti, Rodrigo; Khatri, Aamer Roshanali; Ali, Areeg Anwer
2014-06-01
Estimation of metabolite data as a supportive evidence of comparable therapeutic outcome is recommended by various guidance documents. However, a consensus on using it solely to establish bioequivalence (BE) is lacking as parent drug is believed to detect pharmacokinetic differences between test and reference formulations better. Four BE studies of losartan potassium reported in the literature are reviewed. In all the four studies, 90% confidence intervals (CIs) of geometric mean ratios of the test and reference formulations for maximum blood drug concentration (Cmax ) of losartan potassium were outside the acceptable range of 80%-125%, whereas, 90% CIs for its active metabolite, losartan carboxylic acid (LCA), were within the acceptance criteria. Although BE with respect to area under the plasma concentration versus time profile curve was demonstrated in all the cases, BE with respect to Cmax could not be established. However, marketing authorization in all the four cases was granted based on scientific evidence that LCA is 10-40 times more potent than losartan, LCA exhibited higher plasma concentration levels than losartan, pharmacodynamic effects correlate with LCA, and losartan shows wide therapeutic index. Further, widened CI limits for losartan were accepted. Losartan presents an opportunity in the diligence of the principles of quality risk management for selecting moiety on which BE decision must be based. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.
Life Cycle Assessment for the Production of Oil Palm Seeds
Muhamad, Halimah; Ai, Tan Yew; Khairuddin, Nik Sasha Khatrina; Amiruddin, Mohd Din; May, Choo Yuen
2014-01-01
The oil palm seed production unit that generates germinated oil palm seeds is the first link in the palm oil supply chain, followed by the nursery to produce seedling, the plantation to produce fresh fruit bunches (FFB), the mill to produce crude palm oil (CPO) and palm kernel, the kernel crushers to produce crude palm kernel oil (CPKO), the refinery to produce refined palm oil (RPO) and finally the palm biodiesel plant to produce palm biodiesel. This assessment aims to investigate the life cycle assessment (LCA) of germinated oil palm seeds and the use of LCA to identify the stage/s in the production of germinated oil palm seeds that could contribute to the environmental load. The method for the life cycle impact assessment (LCIA) is modelled using SimaPro version 7, (System for Integrated environMental Assessment of PROducts), an internationally established tool used by LCA practitioners. This software contains European and US databases on a number of materials in addition to a variety of European- and US-developed impact assessment methodologies. LCA was successfully conducted for five seed production units and it was found that the environmental impact for the production of germinated oil palm was not significant. The characterised results of the LCIA for the production of 1000 germinated oil palm seeds showed that fossil fuel was the major impact category followed by respiratory inorganics and climate change. PMID:27073598
DOE Office of Scientific and Technical Information (OSTI.GOV)
Achenbach, Hermann, E-mail: hermann.achenbach@thuenen.de; Diederichs, Stefan K.; Wenker, Jan L.
As a core product category rule (PCR), EN 15804 defines rules for conducting the life cycle assessment (LCA) of building products in the context of environmental product declarations (EPDs). This European standard is complemented by EN 16485, which provides further guidance for specific aspects for the LCA of wood and wood-based construction products. For all life cycle stages under consideration, the renewable and non-renewable primary energy employed for energy generation or material use is accounted for. Furthermore, the inputs and outputs of secondary materials (SM), renewable secondary fuels (RSF) and non-renewable secondary fuels (NRSF) have to be reported. Especially inmore » the end-of life stage as well as in the production stage, the standards do not exactly rule the accounting method of the primary energy contained in SM, RSF and NRSF. As both standards leave room for interpretation, we wrote this discussion article to introduce this issue to the LCA community and to present our developed accounting specifications. In general, we consider EN 15804 and EN 16485 as helpful tools for the LCA of building products. We hope that our ideas on certain aspects contribute to a better understanding of the standards, possibly leading to further improvement in the course of the standardization process.« less
Huijbregts, Mark A J; Gilijamse, Wim; Ragas, Ad M J; Reijnders, Lucas
2003-06-01
The evaluation of uncertainty is relatively new in environmental life-cycle assessment (LCA). It provides useful information to assess the reliability of LCA-based decisions and to guide future research toward reducing uncertainty. Most uncertainty studies in LCA quantify only one type of uncertainty, i.e., uncertainty due to input data (parameter uncertainty). However, LCA outcomes can also be uncertain due to normative choices (scenario uncertainty) and the mathematical models involved (model uncertainty). The present paper outlines a new methodology that quantifies parameter, scenario, and model uncertainty simultaneously in environmental life-cycle assessment. The procedure is illustrated in a case study that compares two insulation options for a Dutch one-family dwelling. Parameter uncertainty was quantified by means of Monte Carlo simulation. Scenario and model uncertainty were quantified by resampling different decision scenarios and model formulations, respectively. Although scenario and model uncertainty were not quantified comprehensively, the results indicate that both types of uncertainty influence the case study outcomes. This stresses the importance of quantifying parameter, scenario, and model uncertainty simultaneously. The two insulation options studied were found to have significantly different impact scores for global warming, stratospheric ozone depletion, and eutrophication. The thickest insulation option has the lowest impact on global warming and eutrophication, and the highest impact on stratospheric ozone depletion.
Life Cycle Assessment for the Production of Oil Palm Seeds.
Muhamad, Halimah; Ai, Tan Yew; Khairuddin, Nik Sasha Khatrina; Amiruddin, Mohd Din; May, Choo Yuen
2014-12-01
The oil palm seed production unit that generates germinated oil palm seeds is the first link in the palm oil supply chain, followed by the nursery to produce seedling, the plantation to produce fresh fruit bunches (FFB), the mill to produce crude palm oil (CPO) and palm kernel, the kernel crushers to produce crude palm kernel oil (CPKO), the refinery to produce refined palm oil (RPO) and finally the palm biodiesel plant to produce palm biodiesel. This assessment aims to investigate the life cycle assessment (LCA) of germinated oil palm seeds and the use of LCA to identify the stage/s in the production of germinated oil palm seeds that could contribute to the environmental load. The method for the life cycle impact assessment (LCIA) is modelled using SimaPro version 7, (System for Integrated environMental Assessment of PROducts), an internationally established tool used by LCA practitioners. This software contains European and US databases on a number of materials in addition to a variety of European- and US-developed impact assessment methodologies. LCA was successfully conducted for five seed production units and it was found that the environmental impact for the production of germinated oil palm was not significant. The characterised results of the LCIA for the production of 1000 germinated oil palm seeds showed that fossil fuel was the major impact category followed by respiratory inorganics and climate change.
Multiscale study on stochastic reconstructions of shale samples
NASA Astrophysics Data System (ADS)
Lili, J.; Lin, M.; Jiang, W. B.
2016-12-01
Shales are known to have multiscale pore systems, composed of macroscale fractures, micropores, and nanoscale pores within gas or oil-producing organic material. Also, shales are fissile and laminated, and the heterogeneity in horizontal is quite different from that in vertical. Stochastic reconstructions are extremely useful in situations where three-dimensional information is costly and time consuming. Thus the purpose of our paper is to reconstruct stochastically equiprobable 3D models containing information from several scales. In this paper, macroscale and microscale images of shale structure in the Lower Silurian Longmaxi are obtained by X-ray microtomography and nanoscale images are obtained by scanning electron microscopy. Each image is representative for all given scales and phases. Especially, the macroscale is four times coarser than the microscale, which in turn is four times lower in resolution than the nanoscale image. Secondly, the cross correlation-based simulation method (CCSIM) and the three-step sampling method are combined together to generate stochastic reconstructions for each scale. It is important to point out that the boundary points of pore and matrix are selected based on multiple-point connectivity function in the sampling process, and thus the characteristics of the reconstructed image can be controlled indirectly. Thirdly, all images with the same resolution are developed through downscaling and upscaling by interpolation, and then we merge multiscale categorical spatial data into a single 3D image with predefined resolution (the microscale image). 30 realizations using the given images and the proposed method are generated. The result reveals that the proposed method is capable of preserving the multiscale pore structure, both vertically and horizontally, which is necessary for accurate permeability prediction. The variogram curves and pore-size distribution for both original 3D sample and the generated 3D realizations are compared. The result indicates that the agreement between the original 3D sample and the generated stochastic realizations is excellent. This work is supported by "973" Program (2014CB239004), the Key Instrument Developing Project of the CAS (ZDYZ2012-1-08-02) and the National Natural Science Foundation of China (Grant No. 41574129).
Backhouse, Martin E
2002-01-01
A number of approaches to conducting economic evaluations could be adopted. However, some decision makers have a preference for wholly stochastic cost-effectiveness analyses, particularly if the sampled data are derived from randomised controlled trials (RCTs). Formal requirements for cost-effectiveness evidence have heightened concerns in the pharmaceutical industry that development costs and times might be increased if formal requirements increase the number, duration or costs of RCTs. Whether this proves to be the case or not will depend upon the timing, nature and extent of the cost-effectiveness evidence required. To illustrate how different requirements for wholly stochastic cost-effectiveness evidence could have a significant impact on two of the major determinants of new drug development costs and times, namely RCT sample size and study duration. Using data collected prospectively in a clinical evaluation, sample sizes were calculated for a number of hypothetical cost-effectiveness study design scenarios. The results were compared with a baseline clinical trial design. The sample sizes required for the cost-effectiveness study scenarios were mostly larger than those for the baseline clinical trial design. Circumstances can be such that a wholly stochastic cost-effectiveness analysis might not be a practical proposition even though its clinical counterpart is. In such situations, alternative research methodologies would be required. For wholly stochastic cost-effectiveness analyses, the importance of prior specification of the different components of study design is emphasised. However, it is doubtful whether all the information necessary for doing this will typically be available when product registration trials are being designed. Formal requirements for wholly stochastic cost-effectiveness evidence based on the standard frequentist paradigm have the potential to increase the size, duration and number of RCTs significantly and hence the costs and timelines associated with new product development. Moreover, it is possible to envisage situations where such an approach would be impossible to adopt. Clearly, further research is required into the issue of how to appraise the economic consequences of alternative economic evaluation research strategies.
Sun, Steven; Francis, Jesse; Sapsford, Kim E.; Kostov, Yordan; Rasooly, Avraham
2010-01-01
A portable and rapid detection system for the activity analysis of Botulinum Neurotoxins (BoNT) is needed for food safety and bio-security applications. To improve BoNT activity detection, a previously designed portable charge-coupled device (CCD) based detector was modified and equipped with a higher intensity more versatile multi-wavelength spatial light-emitting diode (LED) illumination, a faster CCD detector and the capability to simultaneously detect 30 samples. A FITC/DABCYL Förster Resonance Energy Transfer (FRET)-labeled peptide substrate (SNAP-25), with BoNT-A target cleavage site sequence was used to measure BoNT-A light chain (LcA) activity through the FITC fluorescence increase that occurs upon peptide substrate cleavage. For fluorescence excitation, a multi-wavelength spatial LED illuminator was used and compared to our previous electroluminescent (EL) strips. The LED illuminator was equipped with blue, green, red and white LEDs, covering a spectrum of 450-680 nm (red 610-650 nm, green 492-550 nm, blue 450-495 nm, and white LED 440-680 nm). In terms of light intensity, the blue LED was found to be ~80 fold higher than the previously used blue EL strips. When measuring the activity of LcA the CCD detector limit of detection (LOD) was found to be 0.08 nM LcA for both the blue LED (2 s exposure) and the blue EL (which require ≥60 s exposure) while the limits of quantitation (LOQ) is about 1 nM. The LOD for white LED was higher at 1.4 nM while the white EL was not used for the assay due to a high variable background. Unlike the weaker intensity EL illumination the high intensity LED illumination enabled shorter exposure times and allowed multi-wavelength illumination without the need to physically change the excitation strip, thus making spectrum excitation of multiple fluorophores possible increasing the versatility of the detector platform for a variety of optical detection assays. PMID:20498728
Depressive symptoms among adolescents and older adults in Mexico City.
Sánchez-García, Sergio; García-Peña, Carmen; González-Forteza, Catalina; Jiménez-Tapia, Alberto; Gallo, Joseph J; Wagner, Fernando A
2014-06-01
Determine the structure of depressive symptoms among adolescents and older adults through the person-centered approach of latent class analysis (LCA). The study is based on data from two independent samples collected in Mexico City (2,444 adolescents and 2,223 older adults) which included the revised version of the CES-D. The presence or absence of depressed mood (dysphoria), diminished pleasure (anhedonia), drastic change in weight, sleep problems, thinking and concentration difficulties, excessive or inappropriate guilt, fatigue, psychomotor agitation/retardation, and suicide ideation were used in LCA to determine the structure of depressive symptoms for adolescents and older adults. Adolescents reported higher excessive or inappropriate guilt compared to older adults, while older adults had higher proportions of anhedonia, sleep problems, fatigue, and psychomotor agitation/retardation. Similar proportions were found in other symptoms. The LCA analysis showed the best fit with four latent classes (LC): LC 1, "symptoms suggestive of major depressive episode (MDE)" with prevalence of 5.9 % (n = 144) and 10.3 % (n = 230) among adolescents and older adults, respectively; LC 2, "probable MDE symptoms" 18.2 % (n = 446) and 23.0 % (n = 512); LC 3, "possible MDE" 27.7 % (n = 676) and 21.8 % (n = 485); LC 4, "without significant depressive symptoms" 48.2 % (n = 1,178) and 44.8 % (n = 996). The differences in item thresholds between the two groups (adolescents vs. older adults) were statistically significant (Wald test = 255.684, df = 1, p < 0.001). This study documented important similarities and differences in the structure of depressive symptoms between adolescents and older adults that merit acknowledgment, further study, and consideration of their potential clinical and public health implications.
Gilreath, Tamika D; Leventhal, Adam; Barrington-Trimis, Jessica L; Unger, Jennifer B; Cruz, Tess Boley; Berhane, Kiros; Huh, Jimi; Urman, Robert; Wang, Kejia; Howland, Steve; Pentz, Mary Ann; Chou, Chih Ping; McConnell, Rob
2016-02-01
There is a growing public health concern related to the rapid increase in the use of multiple tobacco products among adolescents. This study examined patterns of adolescent use of cigarettes, e-cigarettes, cigars/cigarillo, hookah/waterpipe, and smokeless/dip/chewing tobacco in a population of southern California adolescents. Data from 2,097 11th- and 12th-grade participants in the Southern California Children's Health Study were collected via self-report in 2014. Study participants were asked about lifetime and current (past 30 days) use of cigarettes, cigars/cigarillos/little cigars, e-cigarettes, hookah/waterpipe, and smokeless/dip/chewing tobacco. Latent class analysis (LCA) was used to identify patterns of tobacco use. Hookah/waterpipe tobacco use had the highest current prevalence (10.7%) followed by e-cigarettes (9.6%). The prevalence of use of smokeless/dip/chewing tobacco was lowest, with 2.2% of adolescents reporting current use. The LCA suggested four distinct classes, comprising nonusers (72.3% of the sample), polytobacco experimenters (13.9%), e-cigarette/hookah users (8.2%), and polytobacco users (5.6%). Multinomial logistic regression based on these four classes found that males had double the odds to be polytobacco users relative to nonusers compared to females (odds ratio, 2.3; 95% confidence interval, 1.26-4.25). By identifying naturally occurring configurations of tobacco product use in teens, these findings may be useful to practitioners and policymakers to identify the need for tobacco control interventions that address specific tobacco products and particular combinations of polytobacco use. LCA can be used to identify segments of the population overrepresented among certain tobacco use classes (e.g., boys) that may benefit most from targeted polyproduct intervention approaches. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.
Lee, Adria D; Cassiday, Pamela K; Pawloski, Lucia C; Tatti, Kathleen M; Martin, Monte D; Briere, Elizabeth C; Tondella, M Lucia; Martin, Stacey W
2018-01-01
The appropriate use of clinically accurate diagnostic tests is essential for the detection of pertussis, a poorly controlled vaccine-preventable disease. The purpose of this study was to estimate the sensitivity and specificity of different diagnostic criteria including culture, multi-target polymerase chain reaction (PCR), anti-pertussis toxin IgG (IgG-PT) serology, and the use of a clinical case definition. An additional objective was to describe the optimal timing of specimen collection for the various tests. Clinical specimens were collected from patients with cough illness at seven locations across the United States between 2007 and 2011. Nasopharyngeal and blood specimens were collected from each patient during the enrollment visit. Patients who had been coughing for ≤ 2 weeks were asked to return in 2-4 weeks for collection of a second, convalescent blood specimen. Sensitivity and specificity of each diagnostic test were estimated using three methods-pertussis culture as the "gold standard," composite reference standard analysis (CRS), and latent class analysis (LCA). Overall, 868 patients were enrolled and 13.6% were B. pertussis positive by at least one diagnostic test. In a sample of 545 participants with non-missing data on all four diagnostic criteria, culture was 64.0% sensitive, PCR was 90.6% sensitive, and both were 100% specific by LCA. CRS and LCA methods increased the sensitivity estimates for convalescent serology and the clinical case definition over the culture-based estimates. Culture and PCR were most sensitive when performed during the first two weeks of cough; serology was optimally sensitive after the second week of cough. Timing of specimen collection in relation to onset of illness should be considered when ordering diagnostic tests for pertussis. Consideration should be given to including IgG-PT serology as a confirmatory test in the Council of State and Territorial Epidemiologists (CSTE) case definition for pertussis.
Weiss, Carine; Schröpfer, Daniel; Merten, Sonja
2016-08-11
Despite the successes of routine national childhood vaccination programmes, measles remains a public health concern. The purpose of this paper is to investigate how patterns of parental attitudes are linked to the decision-making process for or against MMR vaccination. This exploratory study was designed to identify distinct patterns of attitudes towards or against measles vaccination through Latent Class Analysis (LCA) in a sub-sample of mothers living in the canton of Aargau in Switzerland. Parents of young children below 36 months of age were randomly selected through parents' counsellors' registries. Among other questions, respondents were asked to state their agreement in response to 14 belief statements regarding measles vaccination on a 5-point Likert scale. To identify groups of parents showing distinct patterns of attitudes and beliefs regarding measles vaccination, we used Latent Class Analysis (LCA). The LCA showed three classes of parents with different attitudes and believes towards measles vaccination: The biggest group (class 1) are those having positive attitudes towards immunisation, followed by the second biggest group (class 2) which is characterised by having fearful attitudes and by showing uncertainty about immunisation. The third group (class 3) shows distinct patterns of critical attitudes against immunisation. Within this group over 90 % agree or totally agree that immunisation is an artificial intrusion into the natural immune system and therefore want to vaccinate their children only if necessary. We find that parents in the Canton Aargau who hesitate to vaccinate their children against measles, mumps and rubella show distinct opinions and attitudes. Health professionals should be aware of these perceptions to tailor their messages accordingly and positively influence these parents to vaccinate their children. Special attention needs to be given to those parents who are planning to vaccinate their children but are not following the national guidelines.
Stochastic inference with spiking neurons in the high-conductance state
NASA Astrophysics Data System (ADS)
Petrovici, Mihai A.; Bill, Johannes; Bytschok, Ilja; Schemmel, Johannes; Meier, Karlheinz
2016-10-01
The highly variable dynamics of neocortical circuits observed in vivo have been hypothesized to represent a signature of ongoing stochastic inference but stand in apparent contrast to the deterministic response of neurons measured in vitro. Based on a propagation of the membrane autocorrelation across spike bursts, we provide an analytical derivation of the neural activation function that holds for a large parameter space, including the high-conductance state. On this basis, we show how an ensemble of leaky integrate-and-fire neurons with conductance-based synapses embedded in a spiking environment can attain the correct firing statistics for sampling from a well-defined target distribution. For recurrent networks, we examine convergence toward stationarity in computer simulations and demonstrate sample-based Bayesian inference in a mixed graphical model. This points to a new computational role of high-conductance states and establishes a rigorous link between deterministic neuron models and functional stochastic dynamics on the network level.
Stochastic stability properties of jump linear systems
NASA Technical Reports Server (NTRS)
Feng, Xiangbo; Loparo, Kenneth A.; Ji, Yuandong; Chizeck, Howard J.
1992-01-01
Jump linear systems are defined as a family of linear systems with randomly jumping parameters (usually governed by a Markov jump process) and are used to model systems subject to failures or changes in structure. The authors study stochastic stability properties in jump linear systems and the relationship among various moment and sample path stability properties. It is shown that all second moment stability properties are equivalent and are sufficient for almost sure sample path stability, and a testable necessary and sufficient condition for second moment stability is derived. The Lyapunov exponent method for the study of almost sure sample stability is discussed, and a theorem which characterizes the Lyapunov exponents of jump linear systems is presented.
Stochastic coupled cluster theory: Efficient sampling of the coupled cluster expansion
NASA Astrophysics Data System (ADS)
Scott, Charles J. C.; Thom, Alex J. W.
2017-09-01
We consider the sampling of the coupled cluster expansion within stochastic coupled cluster theory. Observing the limitations of previous approaches due to the inherently non-linear behavior of a coupled cluster wavefunction representation, we propose new approaches based on an intuitive, well-defined condition for sampling weights and on sampling the expansion in cluster operators of different excitation levels. We term these modifications even and truncated selections, respectively. Utilising both approaches demonstrates dramatically improved calculation stability as well as reduced computational and memory costs. These modifications are particularly effective at higher truncation levels owing to the large number of terms within the cluster expansion that can be neglected, as demonstrated by the reduction of the number of terms to be sampled when truncating at triple excitations by 77% and hextuple excitations by 98%.
Armour, Cherie; Shorter, Gillian W; Elhai, Jon D; Elklit, Ask; Christoffersen, Mogens N
2014-01-01
Substance use and childhood maltreatment experience are linked, but little is known about the association with polydrug use patterns. Latent class analyses (LCA) were performed on eight illicit drugs in a random population sample of young Danes separated by sex (males: n = 1,555; females: n = 1,425). Logistic regressions explored associations of polydrug use patterns and childhood maltreatment. A three-class solution best described patterns of polydrug use in both the male and female samples. Across all LCA models, Class 1 was characterized by individuals who represented wide-range polydrug users, endorsing many of the drug types (males = 8%; females = 2%). Class 2 was characterized by amphetamine, cannabis, cocaine, and amyl nitrate users (males = 18%; females = 7%). Class 3 was characterized by individuals who endorsed either low-level use of cannabis only or no drug use (males = 74%; females = 91 %). For males, having been a child-protection case was associated with Classes 1 and 2 and for females with Class 2, compared with Class 3. Alcohol problems were associated with Classes 1 and 2 for both sexes. Sexual abuse was associated with Classes 1 and 2 for females but not males, whereas physical abuse was associated with Classes 1 and 2 for males but not females, as compared with Class 3. Separate sex analyses are important; although patterns of polydrug use are broadly similar, females are less frequently polydrug users. In addition, different relationships exist for the sexes, such that polydrug use patterns are associated with sexual abuse in females, whereas such patterns are associated with physical abuse in young males.
Studer, Joseph; Baggio, Stéphanie; Mohler-Kuo, Meichun; Simon, Olivier; Daeppen, Jean-Bernard; Gmel, Gerhard
2016-06-01
The study aimed to identify different patterns of gambling activities (PGAs) and to investigate how PGAs differed in gambling problems, substance use outcomes, personality traits and coping strategies. A representative sample of 4989 young Swiss males completed a questionnaire assessing seven distinct gambling activities, gambling problems, substance use outcomes, personality traits and coping strategies. PGAs were identified using latent class analysis (LCA). Differences between PGAs in gambling and substance use outcomes, personality traits and coping strategies were tested. LCA identified six different PGAs. With regard to gambling and substance use outcomes, the three most problematic PGAs were extensive gamblers, followed by private gamblers, and electronic lottery and casino gamblers, respectively. By contrast, the three least detrimental PGAs were rare or non-gamblers, lottery only gamblers and casino gamblers. With regard to personality traits, compared with rare or non-gamblers, private and casino gamblers reported higher levels of sensation seeking. Electronic lottery and casino gamblers, private gamblers and extensive gamblers had higher levels of aggression-hostility. Extensive and casino gamblers reported higher levels of sociability, whereas casino gamblers reported lower levels of anxiety-neuroticism. Extensive gamblers used more maladaptive and less adaptive coping strategies than other groups. Results suggest that gambling is not a homogeneous activity since different types of gamblers exist according to the PGA they are engaged in. Extensive gamblers, electronic and casino gamblers and private gamblers may have the most problematic PGAs. Personality traits and coping skills may predispose individuals to PGAs associated with more or less negative outcomes.
Masters, N Tatiana; Stappenbeck, Cynthia A; Kaysen, Debra; Kajumulo, Kelly F; Davis, Kelly Cue; George, William H; Norris, Jeanette; Heiman, Julia R
2015-08-01
This study identified subgroups of female sexual assault survivors based on characteristics of their victimization experiences, validated the subgroup structure in a second cohort of women recruited identically to the first, and examined subgroups' differential associations with sexual risk/safety behavior, heavy episodic drinking (HED), psychological distress symptomatology, incarceration, transactional sex, and experiences with controlling and violent partners. The community sample consisted of 667 female survivors of adolescent or adult sexual assault who were 21 to 30 years old (M = 24.78, SD = 2.66). Eligibility criteria included having unprotected sex within the past year, other HIV/STI risk factors, and some experience with HED, but without alcohol problems or dependence. Latent class analyses (LCA) were used to identify subgroups of women with similar victimization experiences. Three groups were identified and validated across 2 cohorts of women using multiple-group LCA: contact or attempted assault (17% of the sample), incapacitated assault (52%), and forceful severe assault (31%). Groups did not differ in their sexual risk/safety behavior. Women in the forceful severe category had higher levels of anxiety, depression, and trauma symptoms; higher proportions of incarceration and transactional sex; and more experiences with controlling and violent partners than did women in the other 2 groups. Women in the forceful severe category also reported a higher frequency of HED than women in the incapacitated category. Different types of assault experiences appear to be differentially associated with negative outcomes. Understanding heterogeneity and subgroups among sexual assault survivors has implications for improving clinical care and contributing to recovery. (c) 2015 APA, all rights reserved).
Masters, N. Tatiana; Stappenbeck, Cynthia A.; Kaysen, Debra; Kajumulo, Kelly F.; Davis, Kelly Cue; George, William H.; Norris, Jeanette; Heiman, Julia R.
2015-01-01
This study identified subgroups of female sexual assault survivors based on characteristics of their victimization experiences, validated the subgroup structure in a second cohort of women recruited identically to the first, and examined subgroups' differential associations with sexual risk/safety behavior, heavy episodic drinking (HED), psychological distress symptomatology, incarceration, transactional sex, and experiences with controlling and violent partners. The community sample consisted of 667 female survivors of adolescent or adult sexual assault who were 21 to 30 years old (M=24.78, SD=2.66). Eligibility criteria included having unprotected sex within the past year, other HIV/STI risk factors, and some experience with HED, but without alcohol problems or dependence. Latent class analyses (LCA) were used to identify subgroups of women with similar victimization experiences. Three groups were identified and validated across two cohorts of women using multiple-group LCA: Contact or Attempted assault (17% of the sample), Incapacitated assault (52%), and Forceful Severe assault (31%). Groups did not differ in their sexual risk/safety behavior. Women in the Forceful Severe category had higher levels of anxiety, depression, and trauma symptoms, higher proportions of incarceration and transactional sex, and more experiences with controlling and violent partners than did women in the other two groups. Women in the Forceful Severe category also reported a higher frequency of HED than women in the Incapacitated category. Different types of assault experiences appear to be differentially associated with negative outcomes. Understanding heterogeneity and subgroups among sexual assault survivors has implications for improving clinical care and contributing to recovery. PMID:26052619
Brea-Rivero, Pilar; Herrera-Usagre, Manuel; Rojas-de-Mora-Figueroa, Ana; Esposito, Thomas
2016-01-01
. The accreditation of professional competence: the analysis of nursing interventions to control anxiety in surgical patients. The preoperative anxiety is a state of discomfort or unpleasant tension resulting from concerns about illness, hospitalization, anesthesia, surgery or the unknown. Nurses play a vital role reducing preoperative anxiety. An accreditation program was developed in Andalusia (Spain) to measure nurses' competences in this and others fields. To analyze the accredited nurses' interventions spectrum to reduce anxiety in surgical patients and to check if their range of interventions depends upon their professional skills accreditation level. Cross-sectional study. From 20016 to 2014, 1.282 interventions performed by 303 operating room nurses accredited through the Professional Skills Accreditation Program of the Andalusian Agency for Health Care Quality (ACSA) were analyzed with the latent class analysis (LCA) and multinomial logistic regression. Two-thirds of the sample was accredited in Advanced level, about 31% in Expert level and 2.6% in Excellent level. Mean age of patients was 58.5±19.8 years. Three professional profiles were obtained from the LCA. Those nurses classified in Class I (22.4% of the sample) were more likely to be women, to can for younger patients, and to be accredited in Expert or Excellent Level and to perform the larger range of interventions, becoming therefore the most complete professional profile. Those nurses who perform a wider range of interventions and specifically two evidence based interventions such Calming Technique and Coping Enhancement are those who have a higher level of accreditation level.
Classes of conduct disorder symptoms and their life course correlates in a US national sample.
Breslau, J; Saito, N; Tancredi, D J; Nock, M; Gilman, S E
2012-05-01
Population data on conduct disorder (CD) symptoms can help determine whether hypothesized subtypes of CD are sufficiently disparate in their familial, psychiatric and life course correlates to distinguish separate diagnostic entities. Latent class analysis (LCA) of CD symptoms occurring before age 15 was conducted in a national sample of adults aged 18-44 years from the National Epidemiological Study of Alcohol and Related Conditions. Associations of latent class membership with parental behavior problems, onset of psychiatric disorders and anti-social behaviors after age 15, adolescent life events (e.g. high school drop-out), and past-year life events (e.g. divorce/separation, bankruptcy) were estimated. LCA identified a no-CD class with low prevalence of all symptoms, three intermediate classes - deceit/theft, rule violations, aggression - and a severe class. The prevalence of CD, according to DSM-IV criteria, was 0% in the no-CD class, between 13.33% and 33.69% in the intermediate classes and 62.20% in the severe class. Latent class membership is associated with all the familial, psychiatric and life course outcomes examined. Among the intermediate classes, risk for subsequent mood/anxiety disorders and anti-social behavior was higher in the deceit/theft and aggressive classes than in the rule violations class. However, risk for adolescent life events is highest in the rule violations class. CD symptoms tend to occur in a partially ordered set of classes in the general population. Prognostically meaningful distinctions can be drawn between classes, but only at low levels of symptoms.
Retinoic acid‐induced glandular differentiation of the oesophagus
Chang, Chih‐Long; Lao‐Sirieix, Pierre; Save, Vicki; De La Cueva Mendez, Guillermo; Laskey, Ron; Fitzgerald, Rebecca C
2007-01-01
Background Retinoic acid (RA) is a powerful differentiation agent. Barrett's oesophagus occurs when duodeno‐gastro‐oesophageal reflux causes squamous epithelium (SE) tissue to become columnar epithelium tissue by an unknown mechanism. The bile acid lithocholic acid (LCA) competes for the retinoid X receptor retinoid binding site. Hence, RA pathways may be implicated in Barrett's oesophagus. Methods RA activity in tissues and cell lines treated with all‐trans retinoic acid (ATRA) with or without LCA was assessed using a reporter. Expression of p21 was determined by real‐time PCR in Barrett's oesophagus cell lines with or without LCA. SE and Barrett's oesophagus biopsy specimens were exposed to 100 μM of ATRA or 20 mM of a RA inhibitor, citral, in organ culture for >72 h. Characteristics of treated specimens, compared with untreated controls, were analysed by immunohistochemical analysis (cytokeratins (CKs), vimentin) and RT‐PCR (CKs). Confocal microscopy assessed temporal changes in co‐localisation of CK8/18 and vimentin. Cell proliferation was assessed by bromo‐deoxyuridine incorporation and immunohistochemical analysis for Ki67 and p21. Results RA biosynthesis was increased in Barrett's oesophagus compared with SE (p<0.001). LCA and ATRA caused a synergistic increase in RA signalling as shown by increased p21 (p<0.01). Morphological and molecular analysis of SE exposed to ATRA showed columnar differentiation independent of proliferation. Metaplasia could be induced from the stromal compartment alone and vimentin expression co‐localised with CK8/18 at 24 h, which separated into CK8/18‐positive glands and vimentin‐positive stroma by 48 h. Citral‐treated Barrett's oesophagus led to phenotypic and immunohistochemical characteristics of SE, which was independent of proliferation. Conclusion RA activity is increased in Barrett's oesophagus and is induced by LCA. Under conditions of altered RA activity and an intact stroma, the oesophageal phenotype can be altered independent of proliferation. PMID:17185354
Assessing biodiversity loss due to land use with Life Cycle Assessment: are we there yet?
Souza, Danielle M; Teixeira, Ricardo F M; Ostermann, Ole P
2015-01-01
Ecosystems are under increasing pressure from human activities, with land use and land-use change at the forefront of the drivers that provoke global and regional biodiversity loss. The first step in addressing the challenge of how to reverse the negative outlook for the coming years starts with measuring environmental loss rates and assigning responsibilities. Pinpointing the global pressures on biodiversity is a task best addressed using holistic models such as Life Cycle Assessment (LCA). LCA is the leading method for calculating cradle-to-grave environmental impacts of products and services; it is actively promoted by many public policies, and integrated as part of environmental information systems within private companies. LCA already deals with the potential biodiversity impacts of land use, but there are significant obstacles to overcome before its models grasp the full reach of the phenomena involved. In this review, we discuss some pressing issues that need to be addressed. LCA mainly introduces biodiversity as an endpoint category modeled as a loss in species richness due to the conversion and use of land over time and space. The functional and population effects on biodiversity are mostly absent due to the emphasis on species accumulation with limited geographic and taxonomical reach. Current land-use modeling activities that use biodiversity indicators tend to oversimplify the real dynamics and complexity of the interactions of species among each other and with their habitats. To identify the main areas for improvement, we systematically reviewed LCA studies on land use that had findings related to global change and conservation ecology. We provide suggestion as to how to address some of the issues raised. Our overall objective was to encourage companies to monitor and take concrete steps to address the impacts of land use on biodiversity on a broader geographical scale and along increasingly globalized supply chains. © 2014 The Authors. Global Change Biology Published by John Wiley & Sons Ltd.
Coronary anatomy in children with bicuspid aortic valves and associated congenital heart disease.
Koenraadt, Wilke M C; Bartelings, Margot M; Bökenkamp, Regina; Gittenberger-de Groot, Adriana C; DeRuiter, Marco C; Schalij, Martin J; Jongbloed, Monique Rm
2018-03-01
In patients with bicuspid aortic valve (BAV), coronary anatomy is variable. High take-off coronary arteries have been described, but data are scarce, especially when associated with complex congenital heart disease (CHD). The purpose of this study was to describe coronary patterns in these patients. In 84 postmortem heart specimens with BAV and associated CHD, position and height of the coronary ostia were studied and related to BAV morphology. High take-off right (RCA) and left coronary arteries (LCA) were observed in 23% and 37% of hearts, respectively, most frequently in hearts with hypoplastic left ventricle (HLV) and outflow tract anomalies. In HLV, high take-off was observed in 18/40 (45%) more frequently of LCA (n=14) than RCA (n=6). In hearts with aortic hypoplasia, 8/13 (62%) had high take-off LCA and 6/13 (46%) high take-off RCA. High take-off was seen 19 times in 22 specimens with perimembranous ventricular septal defect (RCA 8, LCA 11). High take-off was associated with type 1A BAV (raphe between right and left coronary leaflets), more outspoken for the RCA. Separate ostia of left anterior descending coronary artery and left circumflex coronary artery were seen in four hearts (5%), not related to specific BAV morphology. High take-off coronary arteries, especially the LCA, occur more frequently in BAV with associated CHD than reported in normal hearts and isolated BAV. Outflow tract defects and HLV are associated with type 1A BAV and high take-off coronary arteries. Although it is unclear whether these findings in infants with detrimental outcome can be related to surviving adults, clinical awareness of variations in coronary anatomy is warranted. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
CARMANCHAHI, P. D.; FERRARI, C. C.; ALDANA MARCOS, H. J.; AFFANNI, J. M.; SONEZ, C. A.; PAZ, D. A.
2000-01-01
Conventional carbohydrate histochemistry and the binding patterns of 21 lectins were analysed to characterise the glycoconjugate content in the components of the vomeronasal organ of the armadillo Chaetophractus villosus. The mucomicrovillous complex of the sensory epithelium bound most of the lectins studied. No reaction was observed with Con A, PSA, S-Con A and SBA, and the sustentacular cells were stained with UEA-I, DSL, LEL, STL and Con A. The vomeronasal receptor neurons were labelled with S-WGA, WGA, PNA, UEA-I, STL, Con A, S-Con A, ECL and RCA120. The basal cell layer reacted with S-WGA, WGA, LCA, UEA-I, DSL, LEL, STL, Con A, JAC and VVA. The nonsensory epithelium exhibited a differential staining in relation to the different components. The mucociliary complex stained with ECL, DBA, JAC, RCA120, STL, LCA, PHA-E, PHA-L, LEL, BSL-I and VVA. However, SJA and UEA-I stained the mucus complex lining a subpopulation of columnar cells. The cytoplasm and cell membranes of columnar cells was labelled with DBA, DSL and LCA. The apical region of these cells exhibited moderate reactivity with LEL and SJA. None of the lectins bound specifically to secretory granules of the nonsecretory cells. Basal cells of the nonsensory epithelium were labelled with DSL, LEL, LCA, BSL-I and STL. The vomeronasal glands showed a positive reaction with WGA, DSL, LEL, LCA, DBA, PNA, RCA120 and SBA. Subpopulations of acinar cells were observed with ECL, S-WGA, Con A, S-Con A and DBA. PNA and RCA120 stained the cells lining the glandular ducts. In comparison with previous results obtained in the olfactory mucosa of the same group of armadillos, the carbohydrate composition of the vomeronasal organ sensory epithelium differed from the olfactory sensory epithelium. This is probably related to the different nature of molecules involved in the perireceptor processes. PMID:10853958
Fantin, Valentina; Scalbi, Simona; Ottaviano, Giuseppe; Masoni, Paolo
2014-04-01
The purpose of this study is to propose a method for harmonising Life Cycle Assessment (LCA) literature studies on the same product or on different products fulfilling the same function for a reliable and meaningful comparison of their life-cycle environmental impacts. The method is divided in six main steps which aim to rationalize and quicken the efforts needed to carry out the comparison. The steps include: 1) a clear definition of the goal and scope of the review; 2) critical review of the references; 3) identification of significant parameters that have to be harmonised; 4) harmonisation of the parameters; 5) statistical analysis to support the comparison; 6) results and discussion. This approach was then applied to the comparative analysis of the published LCA studies on tap and bottled water production, focussing on Global Warming Potential (GWP) results, with the aim to identify the environmental preferable alternative. A statistical analysis with Wilcoxon's test confirmed that the difference between harmonised GWP values of tap and bottled water was significant. The results obtained from the comparison of the harmonised mean GWP results showed that tap water always has the best environmental performance, even in case of high energy-consuming technologies for drinking water treatments. The strength of the method is that it enables both performing a deep analysis of the LCA literature and obtaining more consistent comparisons across the published LCAs. For these reasons, it can be a valuable tool which provides useful information for both practitioners and decision makers. Finally, its application to the case study allowed both to supply a description of systems variability and to evaluate the importance of several key parameters for tap and bottled water production. The comparative review of LCA studies, with the inclusion of a statistical decision test, can validate and strengthen the final statements of the comparison. Copyright © 2014 Elsevier B.V. All rights reserved.
Bruce, David G; Davis, Wendy A; Dragovic, Milan; Davis, Timothy M E; Starkstein, Sergio E
2016-10-01
The aims were to determine whether anxious depression, defined by latent class analysis (LCA), predicts cardiovascular outcomes in type 2 diabetes and to compare the predictive power of anxious depression with Diagnostic & Statistical Manual Versions IV and 5 (DSM-IV/5) categories of depression and generalized anxiety disorder (GAD). Prospective observational study of 1,337 type 2 participants. Baseline assessment with the 9-item Patient Health Questionnaire and the GAD Scale; LCA-defined groups with minor or major anxious depression based on anxiety and depression symptoms. Cox modeling used to compare the independent impact of: (1) LCA anxious depression, (2) DSM-IV/5 depression, (3) GAD on incident cardiovascular events and deaths after 4 years. LCA minor and major anxious depression was present in 21.9 and 7.8% of participants, respectively, DSM-IV/5 minor and major depression in 6.2 and 6.1%, respectively, and GAD in 4.8%. There were 110 deaths, 31 cardiovascular deaths, and 199 participants had incident cardiovascular events. In adjusted models, minor anxious depression (Hazard ratio (95% confidence intervals): 1.70 (1.15-2.50)) and major anxious depression (1.90 (1.11-3.25)) predicted incident cardiovascular events and major anxious depression also predicted cardiovascular mortality (4.32 (1.35-13.86)). By comparison, incident cardiovascular events were predicted by DSM-IV/5 major depression (2.10 (1.22-3.62)) only and cardiovascular mortality was predicted by both DSM-IV/5 major depression (3.56 (1.03-12.35)) and GAD (5.92 (1.84-19.08)). LCA-defined anxious depression is more common than DSM-IV/5 categories and is a strong predictor of cardiovascular outcomes in type 2 diabetes. These data suggest that this diagnostic scheme has predictive validity and clinical relevance. © 2016 Wiley Periodicals, Inc.
Life cycle assessment of first-generation biofuels using a nitrogen crop model.
Gallejones, P; Pardo, G; Aizpurua, A; del Prado, A
2015-02-01
This paper presents an alternative approach to assess the impacts of biofuel production using a method integrating the simulated values of a new semi-empirical model at the crop production stage within a life cycle assessment (LCA). This new approach enabled us to capture some of the effects that climatic conditions and crop management have on soil nitrous oxide (N₂O) emissions, crop yields and other nitrogen (N) losses. This analysis considered the whole system to produce 1 MJ of biofuel (bioethanol from wheat and biodiesel from rapeseed). Non-renewable energy use, global warming potential (GWP), acidification, eutrophication and land competition are considered as potential environmental impacts. Different co-products were handled by system expansion. The aim of this study was (i) to evaluate the variability due to site-specific conditions of climate and fertiliser management of the LCA of two different products: biodiesel from rapeseed and bioethanol from wheat produced in the Basque Country (Northern Spain), and (ii) to improve the estimations of the LCA impacts due to N losses (N₂O, NO₃, NH₃), normally estimated with unspecific emission factors (EFs), that contribute to the impact categories analysed in the LCA of biofuels at local scale. Using biodiesel and bioethanol derived from rapeseed and wheat instead of conventional diesel and gasoline, respectively, would reduce non-renewable energy dependence (-55%) and GWP (-40%), on average, but would increase eutrophication (42 times more potential). An uncertainty analysis for GWP impact showed that the variability associated with the prediction of the major contributor to global warming potential (soil N₂O) can significantly affect the results from the LCA. Therefore the use of a model to account for local factors will improve the precision of the assessment and reduce the uncertainty associated with the convenience of the use of biofuels. Copyright © 2014 Elsevier B.V. All rights reserved.
Srilekha, Sundaramurthy; Arokiasamy, Tharigopala; Srikrupa, Natarajan N.; Umashankar, Vetrivel; Meenakshi, Swaminathan; Sen, Parveen; Kapur, Suman; Soumittra, Nagasamy
2015-01-01
Leber congenital amaurosis (LCA) and retinitis pigmentosa (RP) are retinal degenerative diseases which cause severe retinal dystrophy affecting the photoreceptors. LCA is predominantly inherited as an autosomal recessive trait and contributes to 5% of all retinal dystrophies; whereas RP is inherited by all the Mendelian pattern of inheritance and both are leading causes of visual impairment in children and young adults. Homozygosity mapping is an efficient strategy for mapping both known and novel disease loci in recessive conditions, especially in a consanguineous mating, exploiting the fact that the regions adjacent to the disease locus will also be homozygous by descent in such inbred children. Here we have studied eleven consanguineous LCA and one autosomal recessive RP (arRP) south Indian families to know the prevalence of mutations in known genes and also to know the involvement of novel loci, if any. Complete ophthalmic examination was done for all the affected individuals including electroretinogram, fundus photograph, fundus autofluorescence, and optical coherence tomography. Homozygosity mapping using Affymetrix 250K HMA GeneChip on eleven LCA families followed by screening of candidate gene(s) in the homozygous block identified mutations in ten families; AIPL1 – 3 families, RPE65- 2 families, GUCY2D, CRB1, RDH12, IQCB1 and SPATA7 in one family each, respectively. Six of the ten (60%) mutations identified are novel. Homozygosity mapping using Affymetrix 10K HMA GeneChip on the arRP family identified a novel nonsense mutation in MERTK. The mutations segregated within the family and was absent in 200 control chromosomes screened. In one of the eleven LCA families, the causative gene/mutation was not identified but many homozygous blocks were noted indicating that a possible novel locus/gene might be involved. The genotype and phenotype features, especially the fundus changes for AIPL1, RPE65, CRB1, RDH12 genes were as reported earlier. PMID:26147992
Srilekha, Sundaramurthy; Arokiasamy, Tharigopala; Srikrupa, Natarajan N; Umashankar, Vetrivel; Meenakshi, Swaminathan; Sen, Parveen; Kapur, Suman; Soumittra, Nagasamy
2015-01-01
Leber congenital amaurosis (LCA) and retinitis pigmentosa (RP) are retinal degenerative diseases which cause severe retinal dystrophy affecting the photoreceptors. LCA is predominantly inherited as an autosomal recessive trait and contributes to 5% of all retinal dystrophies; whereas RP is inherited by all the Mendelian pattern of inheritance and both are leading causes of visual impairment in children and young adults. Homozygosity mapping is an efficient strategy for mapping both known and novel disease loci in recessive conditions, especially in a consanguineous mating, exploiting the fact that the regions adjacent to the disease locus will also be homozygous by descent in such inbred children. Here we have studied eleven consanguineous LCA and one autosomal recessive RP (arRP) south Indian families to know the prevalence of mutations in known genes and also to know the involvement of novel loci, if any. Complete ophthalmic examination was done for all the affected individuals including electroretinogram, fundus photograph, fundus autofluorescence, and optical coherence tomography. Homozygosity mapping using Affymetrix 250K HMA GeneChip on eleven LCA families followed by screening of candidate gene(s) in the homozygous block identified mutations in ten families; AIPL1 - 3 families, RPE65- 2 families, GUCY2D, CRB1, RDH12, IQCB1 and SPATA7 in one family each, respectively. Six of the ten (60%) mutations identified are novel. Homozygosity mapping using Affymetrix 10K HMA GeneChip on the arRP family identified a novel nonsense mutation in MERTK. The mutations segregated within the family and was absent in 200 control chromosomes screened. In one of the eleven LCA families, the causative gene/mutation was not identified but many homozygous blocks were noted indicating that a possible novel locus/gene might be involved. The genotype and phenotype features, especially the fundus changes for AIPL1, RPE65, CRB1, RDH12 genes were as reported earlier.
Assessing biodiversity loss due to land use with Life Cycle Assessment: are we there yet?
Souza, Danielle M; Teixeira, Ricardo FM; Ostermann, Ole P
2015-01-01
Ecosystems are under increasing pressure from human activities, with land use and land-use change at the forefront of the drivers that provoke global and regional biodiversity loss. The first step in addressing the challenge of how to reverse the negative outlook for the coming years starts with measuring environmental loss rates and assigning responsibilities. Pinpointing the global pressures on biodiversity is a task best addressed using holistic models such as Life Cycle Assessment (LCA). LCA is the leading method for calculating cradle-to-grave environmental impacts of products and services; it is actively promoted by many public policies, and integrated as part of environmental information systems within private companies. LCA already deals with the potential biodiversity impacts of land use, but there are significant obstacles to overcome before its models grasp the full reach of the phenomena involved. In this review, we discuss some pressing issues that need to be addressed. LCA mainly introduces biodiversity as an endpoint category modeled as a loss in species richness due to the conversion and use of land over time and space. The functional and population effects on biodiversity are mostly absent due to the emphasis on species accumulation with limited geographic and taxonomical reach. Current land-use modeling activities that use biodiversity indicators tend to oversimplify the real dynamics and complexity of the interactions of species among each other and with their habitats. To identify the main areas for improvement, we systematically reviewed LCA studies on land use that had findings related to global change and conservation ecology. We provide suggestion as to how to address some of the issues raised. Our overall objective was to encourage companies to monitor and take concrete steps to address the impacts of land use on biodiversity on a broader geographical scale and along increasingly globalized supply chains. PMID:25143302
Hemmerling, Thomas M; Michaud, Guillaume; Trager, Guillaume; Donati, François
2004-06-01
Phonomyography (PMG) is a new method for measuring neuromuscular blockade (NMB) at the larynx. In this study, we used PMG to compare NMB at the posterior cricoarytenoid (PCA) and the lateral cricoarytenoid muscle (LCA) in humans. Twelve patients were included in this study. Endotracheal intubation was performed without aid of neuromuscular blocking drugs. One small condenser microphone was inserted beside the vocal cords into the muscular process at the base of the arytenoid cartilage to record acoustic responses of the LCA (vocal cord adduction), and a second microphone was placed behind the larynx to measure NMB of the PCA (vocal cord abduction). Stimulation of the recurrent laryngeal nerve was performed using superficial electrodes placed at the neck (midline between jugular notch and cricoid cartilage) using train-of-four (TOF) stimulation every 12 s. After supramaximal stimulation, mivacurium 0.1 mg/kg was injected and onset, peak effect, and offset of NMB measured and compared using t-test (P < 0.05). The data are presented as mean (SD). Peak effect, onset time, and early recovery to 25% of control twitch height were not significantly different between PCA and LCA at 86% (13) versus 78% (16), 2.3 min (0.45) versus 2.3 min (1.0), and 9.55 min (3.05) versus 8.5 min (4.7), respectively. However, recovery to 75%, 90% of control twitch height, and recovery to a TOF ratio of 0.8 were significantly longer at the PCA than at the LCA at 14 min (4) versus 11 min (5), 17 min (5) versus 11.8 min (5.6), and 17.5 min (5.6) versus 12.3 min (5.5), respectively. The authors conclude that recovery of NMB at the PCA takes longer than at the LCA in humans after mivacurium. After neuromuscular blockade in humans, the recovery of the ability to open the vocal cords takes longer than the ability to close the vocal cords.
Liu, Jinjun; Leng, Yonggang; Lai, Zhihui; Fan, Shengbo
2018-04-25
Mechanical fault diagnosis usually requires not only identification of the fault characteristic frequency, but also detection of its second and/or higher harmonics. However, it is difficult to detect a multi-frequency fault signal through the existing Stochastic Resonance (SR) methods, because the characteristic frequency of the fault signal as well as its second and higher harmonics frequencies tend to be large parameters. To solve the problem, this paper proposes a multi-frequency signal detection method based on Frequency Exchange and Re-scaling Stochastic Resonance (FERSR). In the method, frequency exchange is implemented using filtering technique and Single SideBand (SSB) modulation. This new method can overcome the limitation of "sampling ratio" which is the ratio of the sampling frequency to the frequency of target signal. It also ensures that the multi-frequency target signals can be processed to meet the small-parameter conditions. Simulation results demonstrate that the method shows good performance for detecting a multi-frequency signal with low sampling ratio. Two practical cases are employed to further validate the effectiveness and applicability of this method.
SMERFS: Stochastic Markov Evaluation of Random Fields on the Sphere
NASA Astrophysics Data System (ADS)
Creasey, Peter; Lang, Annika
2018-04-01
SMERFS (Stochastic Markov Evaluation of Random Fields on the Sphere) creates large realizations of random fields on the sphere. It uses a fast algorithm based on Markov properties and fast Fourier Transforms in 1d that generates samples on an n X n grid in O(n2 log n) and efficiently derives the necessary conditional covariance matrices.
NASA Astrophysics Data System (ADS)
Takaishi, Tetsuya
2018-06-01
The realized stochastic volatility model has been introduced to estimate more accurate volatility by using both daily returns and realized volatility. The main advantage of the model is that no special bias-correction factor for the realized volatility is required a priori. Instead, the model introduces a bias-correction parameter responsible for the bias hidden in realized volatility. We empirically investigate the bias-correction parameter for realized volatilities calculated at various sampling frequencies for six stocks on the Tokyo Stock Exchange, and then show that the dynamic behavior of the bias-correction parameter as a function of sampling frequency is qualitatively similar to that of the Hansen-Lunde bias-correction factor although their values are substantially different. Under the stochastic diffusion assumption of the return dynamics, we investigate the accuracy of estimated volatilities by examining the standardized returns. We find that while the moments of the standardized returns from low-frequency realized volatilities are consistent with the expectation from the Gaussian variables, the deviation from the expectation becomes considerably large at high frequencies. This indicates that the realized stochastic volatility model itself cannot completely remove bias at high frequencies.
Rapid microbiology - raising awareness.
Bailie, Jonathan
2016-01-01
A 'high-level overview' of some of the emerging rapid microbiology technologies designed to help healthcare engineering and infection control teams working in hospitals and other healthcare facilities more rapidly identify potentially hazardous levels of waterborne microorganisms in their water systems, enabling them to take prompt remedial action, and a look at the some of the 'pros and cons' of such testing techniques, was given by Nalco technical director, Howard Barnes, the vice-chair of the Legionella Control Association (LCA), at a recent LCA open day. HEJ editor, Jonathan Bailie, reports.
Selected-node stochastic simulation algorithm
NASA Astrophysics Data System (ADS)
Duso, Lorenzo; Zechner, Christoph
2018-04-01
Stochastic simulations of biochemical networks are of vital importance for understanding complex dynamics in cells and tissues. However, existing methods to perform such simulations are associated with computational difficulties and addressing those remains a daunting challenge to the present. Here we introduce the selected-node stochastic simulation algorithm (snSSA), which allows us to exclusively simulate an arbitrary, selected subset of molecular species of a possibly large and complex reaction network. The algorithm is based on an analytical elimination of chemical species, thereby avoiding explicit simulation of the associated chemical events. These species are instead described continuously in terms of statistical moments derived from a stochastic filtering equation, resulting in a substantial speedup when compared to Gillespie's stochastic simulation algorithm (SSA). Moreover, we show that statistics obtained via snSSA profit from a variance reduction, which can significantly lower the number of Monte Carlo samples needed to achieve a certain performance. We demonstrate the algorithm using several biological case studies for which the simulation time could be reduced by orders of magnitude.
NASA Astrophysics Data System (ADS)
Zhang, Wei; Wang, Jun
2018-05-01
A novel nonlinear stochastic interacting price dynamics is proposed and investigated by the bond percolation on Sierpinski gasket fractal-like lattice, aim to make a new approach to reproduce and study the complexity dynamics of real security markets. Fractal-like lattices correspond to finite graphs with vertices and edges, which are similar to fractals, and Sierpinski gasket is a well-known example of fractals. Fractional ordinal array entropy and fractional ordinal array complexity are introduced to analyze the complexity behaviors of financial signals. To deeper comprehend the fluctuation characteristics of the stochastic price evolution, the complexity analysis of random logarithmic returns and volatility are preformed, including power-law distribution, fractional sample entropy and fractional ordinal array complexity. For further verifying the rationality and validity of the developed stochastic price evolution, the actual security market dataset are also studied with the same statistical methods for comparison. The empirical results show that this stochastic price dynamics can reconstruct complexity behaviors of the actual security markets to some extent.
Competing values among criminal justice administrators: The importance of substance abuse treatment.
Henderson, Craig E; Taxman, Faye S
2009-08-01
This study applied latent class analysis (LCA) to examine heterogeneity in criminal justice administrators' attitudes toward the importance of substance abuse treatment relative to other programs and services commonly offered in criminal justice settings. The study used data collected from wardens, probation and/or parole administrators, and other justice administrators as part of the National Criminal Justice Treatment Practices survey (NCJTP), and includes both adult criminal and juvenile justice samples. Results of the LCA suggested that administrators fell into four different latent classes: (1) those who place a high importance on substance abuse treatment relative to other programs and services, (2) those who place equal importance on substance abuse treatment and other programs and services, (3) those who value other programs and services moderately more than substance abuse treatment, and (4) those who value other programs and services much more than substance abuse treatment. Latent class membership was in turn associated with the extent to which evidence-based substance abuse treatment practices were being used in the facilities, the region of the country in which the administrator worked, and attitudes toward rehabilitating drug-using offenders. The findings have implications for future research focused on the impact that administrators' attitudes have on service provision as well as the effectiveness of knowledge dissemination and diffusion models.
Prakash, J A J; Kavitha, M L; Mathai, E
2011-01-01
Scrub typhus is a zoonotic illness endemic in the Asia-Pacific region. Early diagnosis and appropriate management contribute significantly to preventing adverse outcomes including mortality. Serology is widely used for diagnosing scrub typhus. Recent reports suggest that polymerase chain reaction (PCR) could be a rapid and reliable alternative. This study assessed the utility of these tests for scrub typhus diagnosis. Nested PCR to detect the 56 kDa antigen gene of O. tsutsugamushi was performed on blood clots from 87 individuals with clinically suspected scrub typhus. Weil-Felix test and scrub typhus IgM ELISA were performed on serum samples from the same patients. As a gold standard reference test was not available, latent class analysis (LCA) was used to assess the performance of the three tests. The LCA analysis showed the sensitivity of Weil-Felix test, IgM ELISA and PCR to be 59%, 100% and 58% respectively. The specificity of ELISA was only 73%, whereas those of the Weil-Felix test and PCR were 94% and 100% respectively. Nested PCR using blood clots while specific, lacked sensitivity as compared to IgM ELISA. In resource-poor settings Weil-Felix test still remains valuable despite its moderate sensitivity.
Competing Values Among Criminal Justice Administrators: The Importance of Substance Abuse Treatment*
Henderson, Craig E.; Taxman, Faye S.
2009-01-01
This study applied latent class analysis (LCA) to examine heterogeneity in criminal justice administrators’ attitudes toward the importance of substance abuse treatment relative to other programs and services commonly offered in criminal justice settings. The study used data collected from wardens, probation and/or parole administrators, and other justice administrators as part of the National Criminal Justice Treatment Practices survey (NCJTP), and includes both adult criminal and juvenile justice samples. Results of the LCA suggested that administrators fell into four different latent classes: (1) those who place a high importance on substance abuse treatment relative to other programs and services, (2) those who place equal importance on substance abuse treatment and other programs and services, (3) those who value other programs and services moderately more than substance abuse treatment, and (4) those who value other programs and services much more than substance abuse treatment. Latent class membership was in turn associated with the extent to which evidence-based substance abuse treatment practices were being used in the facilities, the region of the country in which the administrator worked, and attitudes toward rehabilitating drug-using offenders. The findings have implications for future research focused on the impact that administrators’ attitudes have on service provision as well as the effectiveness of knowledge dissemination and diffusion models. PMID:19054632
Segura, Anna; Pereda, Noemí; Guilera, Georgina
2018-01-01
This study aims to determine whether three different methodological approaches used to assess poly-victimization that apply the Juvenile Victimization Questionnaire (JVQ; Finkelhor, Hamby, Ormrod, & Turner, 2005) identify the same group of adolescent poly-victims. The sample consisted of 1,105 adolescents (590 males and 515 females), aged 12-17 years old (M = 14.52, SD = 1.76) and recruited from seven secondary schools in Spain. The JVQ was used to assess lifetime and past-year experiences of victimization. Poly-victims were more likely to experience all types of victimization than victims, regardless of the method used. The degree of agreement between the methods for identifying poly-victimization was moderate for both timeframes, with the highest agreements being recorded between the one-above-the-mean number of victimizations and Latent Class Analysis (LCA) for lifetime, and between the top 10% and LCA for past-year victimization. Researchers and clinicians should be aware that the use of different methods to define poly-victimization may mean that different victims are identified. The choice of one method or another may have important implications. In consequence, focusing on how we operationalize poly-victimization should be a priority in the near future.
A non-linear dimension reduction methodology for generating data-driven stochastic input models
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ganapathysubramanian, Baskar; Zabaras, Nicholas
Stochastic analysis of random heterogeneous media (polycrystalline materials, porous media, functionally graded materials) provides information of significance only if realistic input models of the topology and property variations are used. This paper proposes a framework to construct such input stochastic models for the topology and thermal diffusivity variations in heterogeneous media using a data-driven strategy. Given a set of microstructure realizations (input samples) generated from given statistical information about the medium topology, the framework constructs a reduced-order stochastic representation of the thermal diffusivity. This problem of constructing a low-dimensional stochastic representation of property variations is analogous to the problem ofmore » manifold learning and parametric fitting of hyper-surfaces encountered in image processing and psychology. Denote by M the set of microstructures that satisfy the given experimental statistics. A non-linear dimension reduction strategy is utilized to map M to a low-dimensional region, A. We first show that M is a compact manifold embedded in a high-dimensional input space R{sup n}. An isometric mapping F from M to a low-dimensional, compact, connected set A is contained in R{sup d}(d<
Simplex-stochastic collocation method with improved scalability
NASA Astrophysics Data System (ADS)
Edeling, W. N.; Dwight, R. P.; Cinnella, P.
2016-04-01
The Simplex-Stochastic Collocation (SSC) method is a robust tool used to propagate uncertain input distributions through a computer code. However, it becomes prohibitively expensive for problems with dimensions higher than 5. The main purpose of this paper is to identify bottlenecks, and to improve upon this bad scalability. In order to do so, we propose an alternative interpolation stencil technique based upon the Set-Covering problem, and we integrate the SSC method in the High-Dimensional Model-Reduction framework. In addition, we address the issue of ill-conditioned sample matrices, and we present an analytical map to facilitate uniformly-distributed simplex sampling.
Rortvedt, L A; Crenshaw, T D
2012-12-01
Kyphosis is an idiopathic disease characterized by abnormal, outward spinal curvature. A spontaneous outbreak and subsidence of kyphosis over a 4-mo period in the University of Wisconsin Swine Research and Teaching Center herd coincided with an accidental omission of vitamin D(3) in 1 of 2 premixes used in sow diets. This controlled experiment was conducted to determine whether vitamin D deletion from premixes used in sow diets would induce kyphosis in their offspring. Crossbred (Landrace × Large White), multiparous sows (n = 8) were fed corn-soybean meal diets supplemented with either 325 IU vitamin D(3)/kg (+D) or 45 IU vitamin D(3)/kg (-D) diet from breeding through lactation. The vitamin D concentrations duplicated formulations of diets fed during the earlier spontaneous outbreak. At weaning (approximately 4 wk), pigs were fed diets devoid of supplemental vitamin D and formulated to supply either 120% of the Ca and P requirements (HCaP) or 80% of the Ca and P requirements (LCaP) until wk 9. At wk 9, all pigs were fed the HCaP diet until wk 13. No evidence of kyphosis was observed in pigs at weaning. Pigs produced by -D sows and fed LCaP diets exhibited a 17% incidence (4/23 pigs) of kyphosis at wk 9. At wk 13, the incidence of kyphosis had increased to 32% (6/19 pigs). Unexpectedly at wk 13, pigs produced by +D sows and fed LCaP diets exhibited a 26% incidence (5/19 pigs) of kyphosis. None of the pigs fed HCaP diets from wk 4 to 13 displayed kyphosis, regardless of maternal diets. Evidence of kyphosis was detected at a younger age if pigs were produced by sows fed -D diets. Whole body and femur bone mineral content determined with dual energy X-ray absorptiometry were reduced (P < 0.05) in pigs fed LCaP vs. HCaP diets, but pigs produced by -D sows were more severely affected. Femur bending moments were reduced (P < 0.05) at wk 9 and 13 in pigs fed LCaP vs. HCaP diets. At wk 13, pigs produced by -D sows and fed LCaP diets had reduced (P < 0.05) bone mineral density and femur yield bending moment compared with pigs from +D sows fed LCaP diets. In conclusion, the 20 to 30% incidence of kyphosis induced by altering vitamin D, Ca, and P concentrations in maternal and nursery diets mimics the incidence observed in spontaneous outbreaks in afflicted herds. A reproducible vitamin D-induced kyphosis in young pigs offers a suitable model to study skeletal tissue characteristics, fetal skeletal tissue development, and potential treatments for pigs and human patients afflicted by this disease.
Mahmmod, Yasser S; Toft, Nils; Katholm, Jørgen; Grønbæk, Carsten; Klaas, Ilka C
2013-11-01
Danish farmers can order a real-time PCR mastitis diagnostic test on routinely taken cow-level samples from milk recordings. Validation of its performance in comparison to conventional mastitis diagnostics under field conditions is essential for efficient control of intramammary infections (IMI) with Staphylococcus aureus (S. aureus). Therefore, the objective of this study was to estimate the sensitivity (Se) and specificity (Sp) of real-time PCR, bacterial culture (BC) and California mastitis test (CMT) for the diagnosis of the naturally occurring IMI with S. aureus in routinely collected milk samples using latent class analysis (LCA) to avoid the assumption of a perfect reference test. Using systematic random sampling, a total of 609 lactating dairy cows were selected from 6 dairy herds with bulk tank milk PCR cycle threshold (Ct) value ≤39 for S. aureus. At routine milk recordings, automatically obtained cow-level (composite) milk samples were analyzed by PCR and at the same milking, 2436 quarter milk samples were collected aseptically for BC and CMT. Results showed that 140 cows (23%) were positive for S. aureus IMI by BC while 170 cows (28%) were positive by PCR. Estimates of Se and Sp for PCR were higher than test estimates of BC and CMT. SeCMT was higher than SeBC however, SpBC was higher than SpCMT. SePCR was 91%, while SeBC was 53%, and SeCMT was 61%. SpPCR was 99%, while SpBC was 89%, and SpCMT was 65%. In conclusion, PCR has a higher performance than the conventional diagnostic tests (BC and CMT) suggesting its usefulness as a routine test for accurate diagnosis of S. aureus IMI from dairy cows at routine milk recordings. The use of LCA provided estimates of the test characteristics for two currently diagnostic tests (BC, CMT) and a novel technique (real-time PCR) for diagnosing S. aureus IMI under field conditions at routine milk recordings in Denmark. Copyright © 2013 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chen, Rui; Qin, Zhangcai; Han, Jeongwoo
This study conducted the updated simulations to depict a life cycle analysis (LCA) of the biodiesel production from soybeans and other feedstocks in the U.S. It addressed in details the interaction between LCA and induced land use change (ILUC) for biodiesel. Relative to the conventional petroleum diesel, soy biodiesel could achieve 76% reduction in GHG emissions without considering ILUC, or 66-72% reduction in overall GHG emissions when various ILUC cases were considered. Soy biodiesel’s fossil fuel consumption rate was also 80% lower than its petroleum counterpart. Furthermore, this study examined the cause and the implication of each key parameter affectingmore » biodiesel LCA results using a sensitivity analysis, which identified the hot spots for fossil fuel consumption and GHG emissions of biodiesel so that future efforts can be made accordingly. Finally, biodiesel produced from other feedstocks (canola oil and tallow) were also investigated to contrast with soy biodiesel and petroleum diesel« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Osses de Eicker, Margarita, E-mail: Margarita.Osses@empa.c; Hischier, Roland, E-mail: Roland.Hischier@empa.c; Hurni, Hans, E-mail: Hans.Hurni@cde.unibe.c
2010-04-15
Nine non-local databases were evaluated with respect to their suitability for the environmental assessment of industrial activities in Latin America. Three assessment methods were considered, namely Life Cycle Assessment (LCA), Environmental Impact Assessment (EIA) and air emission inventories. The analysis focused on data availability in the databases and the applicability of their international data to Latin American industry. The study showed that the European EMEP/EEA Guidebook and the U.S. EPA AP-42 database are the most suitable ones for air emission inventories, whereas the LCI database Ecoinvent is the most suitable one for LCA and EIA. Due to the data coveragemore » in the databases, air emission inventories are easier to develop than LCA or EIA, which require more comprehensive information. One strategy to overcome the limitations of non-local databases for Latin American industry is the combination of validated data from international databases with newly developed local datasets.« less
Adhitya, Arief; Halim, Iskandar; Srinivasan, Rajagopalan
2011-12-01
As the issue of environmental sustainability is becoming an important business factor, companies are now looking for decision support tools to assess the fuller picture of the environmental impacts associated with their manufacturing operations and supply chain (SC) activities. Lifecycle assessment (LCA) is widely used to measure the environmental consequences assignable to a product. However, it is usually limited to a high-level snapshot of the environmental implications over the product value chain without consideration of the dynamics arising from the multitiered structure and the interactions along the SC. This paper proposes a framework for green supply chain management by integrating a SC dynamic simulation and LCA indicators to evaluate both the economic and environmental impacts of various SC decisions such as inventories, distribution network configuration, and ordering policy. The advantages of this framework are demonstrated through an industrially motivated case study involving diaper production. Three distinct scenarios are evaluated to highlight how the proposed approach enables integrated decision support for green SC design and operation.
Pretel, R; Robles, A; Ruano, M V; Seco, A; Ferrer, J
2013-12-01
The objective of this study was to assess the environmental impact of a submerged anaerobic MBR (SAnMBR) system in the treatment of urban wastewater at different temperatures: ambient temperature (20 and 33°C), and a controlled temperature (33°C). To this end, an overall energy balance (OEB) and life cycle assessment (LCA), both based on real process data, were carried out. Four factors were considered in this study: (1) energy consumption during wastewater treatment; (2) energy recovered from biogas capture; (3) potential recovery of nutrients from the final effluent; and (4) sludge disposal. The OEB and LCA showed SAnMBR to be a promising technology for treating urban wastewater at ambient temperature (OEB=0.19 kW h m(-3)). LCA results reinforce the importance of maximising the recovery of nutrients (environmental impact in eutrophication can be reduced up to 45%) and dissolved methane (positive environmental impact can be obtained) from SAnMBR effluent. Copyright © 2013 Elsevier Ltd. All rights reserved.
Market-driven emissions from recovery of carbon dioxide gas.
Supekar, Sarang D; Skerlos, Steven J
2014-12-16
This article uses a market-based allocation method in a consequential life cycle assessment (LCA) framework to estimate the environmental emissions created by recovering carbon dioxide (CO2). We find that 1 ton of CO2 recovered as a coproduct of chemicals manufacturing leads to additional greenhouse gas emissions of 147-210 kg CO2 eq , while consuming 160-248 kWh of electricity, 254-480 MJ of heat, and 1836-4027 kg of water. The ranges depend on the initial and final purity of the CO2, particularly because higher purity grades require additional processing steps such as distillation, as well as higher temperature and flow rate of regeneration as needed for activated carbon treatment and desiccant beds. Higher purity also reduces process efficiency due to increased yield losses from regeneration gas and distillation reflux. Mass- and revenue-based allocation methods used in attributional LCA estimate that recovering CO2 leads to 19 and 11 times the global warming impact estimated from a market-based allocation used in consequential LCA.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pavlou, A. T.; Betzler, B. R.; Burke, T. P.
Uncertainties in the composition and fabrication of fuel compacts for the Fort St. Vrain (FSV) high temperature gas reactor have been studied by performing eigenvalue sensitivity studies that represent the key uncertainties for the FSV neutronic analysis. The uncertainties for the TRISO fuel kernels were addressed by developing a suite of models for an 'average' FSV fuel compact that models the fuel as (1) a mixture of two different TRISO fuel particles representing fissile and fertile kernels, (2) a mixture of four different TRISO fuel particles representing small and large fissile kernels and small and large fertile kernels and (3)more » a stochastic mixture of the four types of fuel particles where every kernel has its diameter sampled from a continuous probability density function. All of the discrete diameter and continuous diameter fuel models were constrained to have the same fuel loadings and packing fractions. For the non-stochastic discrete diameter cases, the MCNP compact model arranged the TRISO fuel particles on a hexagonal honeycomb lattice. This lattice-based fuel compact was compared to a stochastic compact where the locations (and kernel diameters for the continuous diameter cases) of the fuel particles were randomly sampled. Partial core configurations were modeled by stacking compacts into fuel columns containing graphite. The differences in eigenvalues between the lattice-based and stochastic models were small but the runtime of the lattice-based fuel model was roughly 20 times shorter than with the stochastic-based fuel model. (authors)« less
Stochastic inversion of cross-borehole radar data from metalliferous vein detection
NASA Astrophysics Data System (ADS)
Zeng, Zhaofa; Huai, Nan; Li, Jing; Zhao, Xueyu; Liu, Cai; Hu, Yingsa; Zhang, Ling; Hu, Zuzhi; Yang, Hui
2017-12-01
In the exploration and evaluation of the metalliferous veins with a cross-borehole radar system, traditional linear inversion methods (least squares inversion, LSQR) only get indirect parameters (permittivity, resistivity, or velocity) to estimate the target structure. They cannot accurately reflect the geological parameters of the metalliferous veins’ media properties. In order to get the intrinsic geological parameters and internal distribution, in this paper, we build a metalliferous veins model based on the stochastic effective medium theory, and carry out stochastic inversion and parameter estimation based on the Monte Carlo sampling algorithm. Compared with conventional LSQR, the stochastic inversion can get higher resolution inversion permittivity and velocity of the target body. We can estimate more accurately the distribution characteristics of abnormality and target internal parameters. It provides a new research idea to evaluate the properties of complex target media.
Research in Stochastic Processes
1988-08-31
stationary sequence, Stochastic Proc. Appl. 29, 1988, 155-169 T. Hsing, J. Husler and M.R. Leadbetter, On the exceedance point process for a stationary...Nandagopalan, On exceedance point processes for "regular" sample functions, Proc. Volume, Oberxolfach Conf. on Extreme Value Theory, J. Husler and R. Reiss...exceedance point processes for stationary sequences under mild oscillation restrictions, Apr. 88. Obermotfach Conf. on Extremal Value Theory. Ed. J. HUsler
ERIC Educational Resources Information Center
Hentschel, Maren; Lange-Kuttner, Christiane; Averbeck, Bruno B.
2016-01-01
The study investigated sequence learning from stochastic feedback in boys with Autistic Spectrum Disorder (ASD) and typically developed (TD) boys. We asked boys with ASD from Nigeria and the UK as well as age- and gender-matched controls (also males only) to deduce a sequence of four left and right button presses, LLRR, RRLL, LRLR, RLRL, LRRL and…
2013-01-01
Background Falls among the elderly are a major public health concern. Therefore, the possibility of a modeling technique which could better estimate fall probability is both timely and needed. Using biomedical, pharmacological and demographic variables as predictors, latent class analysis (LCA) is demonstrated as a tool for the prediction of falls among community dwelling elderly. Methods Using a retrospective data-set a two-step LCA modeling approach was employed. First, we looked for the optimal number of latent classes for the seven medical indicators, along with the patients’ prescription medication and three covariates (age, gender, and number of medications). Second, the appropriate latent class structure, with the covariates, were modeled on the distal outcome (fall/no fall). The default estimator was maximum likelihood with robust standard errors. The Pearson chi-square, likelihood ratio chi-square, BIC, Lo-Mendell-Rubin Adjusted Likelihood Ratio test and the bootstrap likelihood ratio test were used for model comparisons. Results A review of the model fit indices with covariates shows that a six-class solution was preferred. The predictive probability for latent classes ranged from 84% to 97%. Entropy, a measure of classification accuracy, was good at 90%. Specific prescription medications were found to strongly influence group membership. Conclusions In conclusion the LCA method was effective at finding relevant subgroups within a heterogenous at-risk population for falling. This study demonstrated that LCA offers researchers a valuable tool to model medical data. PMID:23705639
NASA Astrophysics Data System (ADS)
Yusuf, M. A.; Romli, M.; Suprihatin; Wiloso, E. I.
2018-05-01
Industrial activities use material, energy and water resources and generate greenhouse gas (GHG). Currently, various regulations require industry to measure and quantify the emissions generated from its process activity. LCA is a method that can be used to analyze and report the environmental impact of an activity that uses resources and generates waste by an industrial activity. In this work, LCA is used to determine the environmental impact of a semi-mechanical extraction process of sago industry. The data was collected through the sago industry in Cimahpar, Bogor. The extraction of sago starch consists of stem cutting, rasping, mixing, filtration, starch sedimentation, washing, and drying. The scope of LCA study covers the harvesting of sago stem, transportation to extraction site, and the starch extraction process. With the assumption that the average transportation distance of sago stem to extraction site is 200 km, the GHG emission is estimated to be 325 kg CO2 eq / ton of sundried sago starch. This figure is lower than that reported for maize starch (1120 kg CO2 eq), potato starch (2232 kg CO2 eq) and cassava starch (4310 kg CO2 eq). This is most likely due to the uncounted impact from the use of electrical energy on the extraction process, which is currently being conducted. A follow-up study is also underway to formulate several process improvement scenarios to derive the design of sago starch processing that generates the minimum emissions.
Addressing bystander exposure to agricultural pesticides in life cycle impact assessment.
Ryberg, Morten Walbech; Rosenbaum, Ralph K; Mosqueron, Luc; Fantke, Peter
2018-04-01
Residents living near agricultural fields may be exposed to pesticides drifting from the fields after application to different field crops. To address this currently missing exposure pathway in life cycle assessment (LCA), we developed a modeling framework for quantifying exposure of bystanders to pesticide spray drift from agricultural fields. Our framework consists of three parts addressing: (1) loss of pesticides from an agricultural field via spray drift; (2) environmental fate of pesticide in air outside of the treated field; and (3) exposure of bystanders to pesticides via inhalation. A comparison with measured data in a case study on pesticides applied to potato fields shows that our model gives good predictions of pesticide air concentrations. We compared our bystander exposure estimates with pathways currently included in LCA, namely aggregated inhalation and ingestion exposure mediated via the environment for the general population, and general population exposure via ingestion of pesticide residues in consumed food crops. The results show that exposure of bystanders is limited relative to total population exposure from ingestion of pesticide residues in crops, but that the exposure magnitude of individual bystanders can be substantially larger than the exposure of populations not living in the proximity to agricultural fields. Our framework for assessing bystander exposure to pesticide applications closes a relevant gap in the exposure assessment included in LCA for agricultural pesticides. This inclusion aids decision-making based on LCA as previously restricted knowledge about exposure of bystanders can now be taken into account. Copyright © 2018 Elsevier Ltd. All rights reserved.
Towards a Computational Comparative Neuroprimatology: Framing the language-ready brain.
Arbib, Michael A
2016-03-01
We make the case for developing a Computational Comparative Neuroprimatology to inform the analysis of the function and evolution of the human brain. First, we update the mirror system hypothesis on the evolution of the language-ready brain by (i) modeling action and action recognition and opportunistic scheduling of macaque brains to hypothesize the nature of the last common ancestor of macaque and human (LCA-m); and then we (ii) introduce dynamic brain modeling to show how apes could acquire gesture through ontogenetic ritualization, hypothesizing the nature of evolution from LCA-m to the last common ancestor of chimpanzee and human (LCA-c). We then (iii) hypothesize the role of imitation, pantomime, protosign and protospeech in biological and cultural evolution from LCA-c to Homo sapiens with a language-ready brain. Second, we suggest how cultural evolution in Homo sapiens led from protolanguages to full languages with grammar and compositional semantics. Third, we assess the similarities and differences between the dorsal and ventral streams in audition and vision as the basis for presenting and comparing two models of language processing in the human brain: A model of (i) the auditory dorsal and ventral streams in sentence comprehension; and (ii) the visual dorsal and ventral streams in defining "what language is about" in both production and perception of utterances related to visual scenes provide the basis for (iii) a first step towards a synthesis and a look at challenges for further research. Copyright © 2015 Elsevier B.V. All rights reserved.
Inoue, Yasushi; Katayama, Arata
2011-09-15
A two-scale evaluation concept of remediation technologies for a contaminated site was expanded by introducing life cycle costing (LCC) and economic input-output life cycle assessment (EIO-LCA). The expanded evaluation index, the rescue number for soil (RN(SOIL)) with LCC and EIO-LCA, comprises two scales, such as risk-cost, risk-energy consumption or risk-CO(2) emission of a remediation. The effectiveness of RN(SOIL) with LCC and EIO-LCA was examined in a typical contamination and remediation scenario in which dieldrin contaminated an agricultural field. Remediation was simulated using four technologies: disposal, high temperature thermal desorption, biopile and landfarming. Energy consumption and CO(2) emission were determined from a life cycle inventory analysis using monetary-based intensity based on an input-output table. The values of RN(SOIL) based on risk-cost, risk-energy consumption and risk-CO(2) emission were calculated, and then rankings of the candidates were compiled according to RN(SOIL) values. A comparison between three rankings showed the different ranking orders. The existence of differences in ranking order indicates that the scales would not have reciprocal compatibility for two-scale evaluation and that each scale should be used independently. The RN(SOIL) with LCA will be helpful in selecting a technology, provided an appropriate scale is determined. Copyright © 2011 Elsevier B.V. All rights reserved.
Towards a Computational Comparative Neuroprimatology: Framing the language-ready brain
NASA Astrophysics Data System (ADS)
Arbib, Michael A.
2016-03-01
We make the case for developing a Computational Comparative Neuroprimatology to inform the analysis of the function and evolution of the human brain. First, we update the mirror system hypothesis on the evolution of the language-ready brain by (i) modeling action and action recognition and opportunistic scheduling of macaque brains to hypothesize the nature of the last common ancestor of macaque and human (LCA-m); and then we (ii) introduce dynamic brain modeling to show how apes could acquire gesture through ontogenetic ritualization, hypothesizing the nature of evolution from LCA-m to the last common ancestor of chimpanzee and human (LCA-c). We then (iii) hypothesize the role of imitation, pantomime, protosign and protospeech in biological and cultural evolution from LCA-c to Homo sapiens with a language-ready brain. Second, we suggest how cultural evolution in Homo sapiens led from protolanguages to full languages with grammar and compositional semantics. Third, we assess the similarities and differences between the dorsal and ventral streams in audition and vision as the basis for presenting and comparing two models of language processing in the human brain: A model of (i) the auditory dorsal and ventral streams in sentence comprehension; and (ii) the visual dorsal and ventral streams in defining ;what language is about; in both production and perception of utterances related to visual scenes provide the basis for (iii) a first step towards a synthesis and a look at challenges for further research.
Stefan-van Staden, Raluca-Ioana; Comnea-Stancu, Ionela Raluca; Yanık, Hülya; Göksel, Meltem; Alexandru, Anghel; Durmuş, Mahmut
2017-10-01
Phthalocyanine-BODIPY dye (BODIPY = boron dipyrromethene) was synthesized, fully characterized, and used for molecular recognition of CYFRA 21-1, a lung cancer biomarker, from whole blood samples. Thin films of three magnesium oxides ((MgO) n , where n = 8, 9, or 10)) were deposited on a paper substrate, and they were immersed in a solution of phthalocyanine-BODIPY dye (1.17 × 10 -3 mol/L) for the design of stochastic sensors. Limits of determination of picograms per milliliter magnitude order were recorded for the proposed stochastic sensors. CYFRA 21-1 was reliably identified and determined with recoveries higher than 95% and RSD lower than 1% in whole blood samples.
Degeling, Koen; IJzerman, Maarten J; Koopman, Miriam; Koffijberg, Hendrik
2017-12-15
Parametric distributions based on individual patient data can be used to represent both stochastic and parameter uncertainty. Although general guidance is available on how parameter uncertainty should be accounted for in probabilistic sensitivity analysis, there is no comprehensive guidance on reflecting parameter uncertainty in the (correlated) parameters of distributions used to represent stochastic uncertainty in patient-level models. This study aims to provide this guidance by proposing appropriate methods and illustrating the impact of this uncertainty on modeling outcomes. Two approaches, 1) using non-parametric bootstrapping and 2) using multivariate Normal distributions, were applied in a simulation and case study. The approaches were compared based on point-estimates and distributions of time-to-event and health economic outcomes. To assess sample size impact on the uncertainty in these outcomes, sample size was varied in the simulation study and subgroup analyses were performed for the case-study. Accounting for parameter uncertainty in distributions that reflect stochastic uncertainty substantially increased the uncertainty surrounding health economic outcomes, illustrated by larger confidence ellipses surrounding the cost-effectiveness point-estimates and different cost-effectiveness acceptability curves. Although both approaches performed similar for larger sample sizes (i.e. n = 500), the second approach was more sensitive to extreme values for small sample sizes (i.e. n = 25), yielding infeasible modeling outcomes. Modelers should be aware that parameter uncertainty in distributions used to describe stochastic uncertainty needs to be reflected in probabilistic sensitivity analysis, as it could substantially impact the total amount of uncertainty surrounding health economic outcomes. If feasible, the bootstrap approach is recommended to account for this uncertainty.
Modified Methodology for Projecting Coastal Louisiana Land Changes over the Next 50 Years
Hartley, Steve B.
2009-01-01
The coastal Louisiana landscape is continually undergoing geomorphologic changes (in particular, land loss); however, after the 2005 hurricane season, the changes were intensified because of Hurricanes Katrina and Rita. The amount of land loss caused by the 2005 hurricane season was 42 percent (562 km2) of the total land loss (1,329 km2) that was projected for the next 50 years in the Louisiana Coastal Area (LCA), Louisiana Ecosystem Restoration Study. The purpose of this study is to provide information on potential changes to coastal Louisiana by using a revised LCA study methodology. In the revised methodology, we used classified Landsat TM satellite imagery from 1990, 2001, 2004, and 2006 to calculate the 'background' or ambient land-water change rates but divided the Louisiana coastal area differently on the basis of (1) geographic regions ('subprovinces') and (2) specific homogeneous habitat types. Defining polygons by subprovinces (1, Pontchartrain Basin; 2, Barataria Basin; 3, Vermilion/Terrebonne Basins; and 4, the Chenier Plain area) allows for a specific erosion rate to be applied to that area. Further subdividing the provinces by habitat type allows for specific erosion rates for a particular vegetation type to be applied. Our modified methodology resulted in 24 polygons rather than the 183 that were used in the LCA study; further, actively managed areas and the CWPPRA areas were not masked out and dealt with separately as in the LCA study. This revised methodology assumes that erosion rates for habitat types by subprovince are under the influence of similar environmental conditions (sediment depletion, subsidence, and saltwater intrusion). Background change rate for three time periods (1990-2001, 1990-2004, and 1990-2006) were calculated by taking the difference in water or land among each time period and dividing it by the time interval. This calculation gives an annual change rate for each polygon per time period. Change rates for each time period were then used to compute the projected change in each subprovince and habitat type over 50 years by using the same compound rate functions used in the LCA study. The resulting maps show projected land changes based on the revised methodology and inclusion of damage by Hurricanes Katrina and Rita. Comparison of projected land change values between the LCA study and this study shows that this revised methodology - that is, using a reduced polygon subset (reduced from 183 to 24) based on habitat type and subprovince - can be used as a quick projection of land loss.
Laner, David; Rechberger, Helmut; De Soete, Wouter; De Meester, Steven; Astrup, Thomas F
2015-12-01
Exergy is based on the Second Law of thermodynamics and can be used to express physical and chemical potential and provides a unified measure for resource accounting. In this study, exergy analysis was applied to four residual household waste management scenarios with focus on the achieved resource recovery efficiencies. The calculated exergy efficiencies were used to compare the scenarios and to evaluate the applicability of exergy-based measures for expressing resource quality and for optimizing resource recovery. Exergy efficiencies were determined based on two approaches: (i) exergy flow analysis of the waste treatment system under investigation and (ii) exergetic life cycle assessment (LCA) using the Cumulative Exergy Extraction from the Natural Environment (CEENE) as a method for resource accounting. Scenario efficiencies of around 17-27% were found based on the exergy flow analysis (higher efficiencies were associated with high levels of material recycling), while the scenario efficiencies based on the exergetic LCA lay in a narrow range around 14%. Metal recovery was beneficial in both types of analyses, but had more influence on the overall efficiency in the exergetic LCA approach, as avoided burdens associated with primary metal production were much more important than the exergy content of the recovered metals. On the other hand, plastic recovery was highly beneficial in the exergy flow analysis, but rather insignificant in exergetic LCA. The two approaches thereby offered different quantitative results as well as conclusions regarding material recovery. With respect to resource quality, the main challenge for the exergy flow analysis is the use of exergy content and exergy losses as a proxy for resource quality and resource losses, as exergy content is not per se correlated with the functionality of a material. In addition, the definition of appropriate waste system boundaries is critical for the exergy efficiencies derived from the flow analysis, as it is constrained by limited information available about the composition of flows in the system as well as about secondary production processes and their interaction with primary or traditional production chains. In the exergetic LCA, resource quality could be reflected by the savings achieved by product substitution and the consideration of the waste's upstream burden allowed for an evaluation of the waste's resource potential. For a comprehensive assessment of resource efficiency in waste LCA, the sensitivity of accounting for product substitution should be carefully analyzed and cumulative exergy consumption measures should be complimented by other impact categories. Copyright © 2015 Elsevier Ltd. All rights reserved.
O'Brien, D; Shalloo, L; Patton, J; Buckley, F; Grainger, C; Wallace, M
2012-09-01
Life cycle assessment (LCA) and the Intergovernmental Panel on Climate Change (IPCC) guideline methodology, which are the principal greenhouse gas (GHG) quantification methods, were evaluated in this study using a dairy farm GHG model. The model was applied to estimate GHG emissions from two contrasting dairy systems: a seasonal calving pasture-based dairy farm and a total confinement dairy system. Data used to quantify emissions from these systems originated from a research study carried out over a 1-year period in Ireland. The genetic merit of cows modelled was similar for both systems. Total mixed ration was fed in the Confinement system, whereas grazed grass was mainly fed in the grass-based system. GHG emissions from these systems were quantified per unit of product and area. The results of both methods showed that the dairy system that emitted the lowest GHG emissions per unit area did not necessarily emit the lowest GHG emissions possible for a given level of product. Consequently, a recommendation from this study is that GHG emissions be evaluated per unit of product given the growing affluent human population and increasing demand for dairy products. The IPCC and LCA methods ranked dairy systems' GHG emissions differently. For instance, the IPCC method quantified that the Confinement system reduced GHG emissions per unit of product by 8% compared with the grass-based system, but the LCA approach calculated that the Confinement system increased emissions by 16% when off-farm emissions associated with primary dairy production were included. Thus, GHG emissions should be quantified using approaches that quantify the total GHG emissions associated with the production system, so as to determine whether the dairy system was causing emissions displacement. The IPCC and LCA methods were also used in this study to simulate, through a dairy farm GHG model, what effect management changes within both production systems have on GHG emissions. The findings suggest that single changes have a small mitigating effect on GHG emissions (<5%), except for strategies used to control emissions from manure storage in the Confinement system (14% to 24%). However, when several management strategies were combined, GHG emissions per unit of product could be reduced significantly (15% to 30%). The LCA method was identified as the preferred approach to assess the effect of management changes on GHG emissions, but the analysis indicated that further standardisation of the approach is needed given the sensitivity of the approach to allocation decisions regarding milk and meat.
Investor Outlook: Focus on Upcoming LCA2 Gene Therapy Phase III Results.
Schimmer, Joshua; Breazzano, Steven
2015-09-01
Investor interest in gene therapy has increased substantially over the past few years, and the next major catalyst for the field is likely to be Spark Therapeutics's phase III trial for the treatment of visual impairment caused by RPE65 gene mutations (often referred to as Leber congenital amaurosis type 2, or LCA2, but may include other retinal disorders). Analysis of the approach from the basic genetics, underlying visual mechanisms, clinical data, and commercialization considerations helps frame investor expectations and the potential implications for the broader field.
Stochastic detection of enantiomers.
Kang, Xiao-Feng; Cheley, Stephen; Guan, Xiyun; Bayley, Hagan
2006-08-23
The rapid quantification of the enantiomers of small chiral molecules is very important, notably in pharmacology. Here, we show that the enantiomers of drug molecules can be distinguished by stochastic sensing, a single-molecule detection technique. The sensing element is an engineered alpha-hemolysin protein pore, fitted with a beta-cyclodextrin adapter. By using the approach, the enantiomeric composition of samples of ibuprofen and thalidomide can be determined in less than 1 s.
Ding, Shaojie; Qian, Min; Qian, Hong; Zhang, Xuejuan
2016-12-28
The stochastic Hodgkin-Huxley model is one of the best-known examples of piecewise deterministic Markov processes (PDMPs), in which the electrical potential across a cell membrane, V(t), is coupled with a mesoscopic Markov jump process representing the stochastic opening and closing of ion channels embedded in the membrane. The rates of the channel kinetics, in turn, are voltage-dependent. Due to this interdependence, an accurate and efficient sampling of the time evolution of the hybrid stochastic systems has been challenging. The current exact simulation methods require solving a voltage-dependent hitting time problem for multiple path-dependent intensity functions with random thresholds. This paper proposes a simulation algorithm that approximates an alternative representation of the exact solution by fitting the log-survival function of the inter-jump dwell time, H(t), with a piecewise linear one. The latter uses interpolation points that are chosen according to the time evolution of the H(t), as the numerical solution to the coupled ordinary differential equations of V(t) and H(t). This computational method can be applied to all PDMPs. Pathwise convergence of the approximated sample trajectories to the exact solution is proven, and error estimates are provided. Comparison with a previous algorithm that is based on piecewise constant approximation is also presented.
Representing and computing regular languages on massively parallel networks
DOE Office of Scientific and Technical Information (OSTI.GOV)
Miller, M.I.; O'Sullivan, J.A.; Boysam, B.
1991-01-01
This paper proposes a general method for incorporating rule-based constraints corresponding to regular languages into stochastic inference problems, thereby allowing for a unified representation of stochastic and syntactic pattern constraints. The authors' approach first established the formal connection of rules to Chomsky grammars, and generalizes the original work of Shannon on the encoding of rule-based channel sequences to Markov chains of maximum entropy. This maximum entropy probabilistic view leads to Gibb's representations with potentials which have their number of minima growing at precisely the exponential rate that the language of deterministically constrained sequences grow. These representations are coupled to stochasticmore » diffusion algorithms, which sample the language-constrained sequences by visiting the energy minima according to the underlying Gibbs' probability law. The coupling to stochastic search methods yields the all-important practical result that fully parallel stochastic cellular automata may be derived to generate samples from the rule-based constraint sets. The production rules and neighborhood state structure of the language of sequences directly determines the necessary connection structures of the required parallel computing surface. Representations of this type have been mapped to the DAP-510 massively-parallel processor consisting of 1024 mesh-connected bit-serial processing elements for performing automated segmentation of electron-micrograph images.« less
Pecevski, Dejan; Buesing, Lars; Maass, Wolfgang
2011-01-01
An important open problem of computational neuroscience is the generic organization of computations in networks of neurons in the brain. We show here through rigorous theoretical analysis that inherent stochastic features of spiking neurons, in combination with simple nonlinear computational operations in specific network motifs and dendritic arbors, enable networks of spiking neurons to carry out probabilistic inference through sampling in general graphical models. In particular, it enables them to carry out probabilistic inference in Bayesian networks with converging arrows (“explaining away”) and with undirected loops, that occur in many real-world tasks. Ubiquitous stochastic features of networks of spiking neurons, such as trial-to-trial variability and spontaneous activity, are necessary ingredients of the underlying computational organization. We demonstrate through computer simulations that this approach can be scaled up to neural emulations of probabilistic inference in fairly large graphical models, yielding some of the most complex computations that have been carried out so far in networks of spiking neurons. PMID:22219717
A stochastic hybrid model for pricing forward-start variance swaps
NASA Astrophysics Data System (ADS)
Roslan, Teh Raihana Nazirah
2017-11-01
Recently, market players have been exposed to the astounding increase in the trading volume of variance swaps. In this paper, the forward-start nature of a variance swap is being inspected, where hybridizations of equity and interest rate models are used to evaluate the price of discretely-sampled forward-start variance swaps. The Heston stochastic volatility model is being extended to incorporate the dynamics of the Cox-Ingersoll-Ross (CIR) stochastic interest rate model. This is essential since previous studies on variance swaps were mainly focusing on instantaneous-start variance swaps without considering the interest rate effects. This hybrid model produces an efficient semi-closed form pricing formula through the development of forward characteristic functions. The performance of this formula is investigated via simulations to demonstrate how the formula performs for different sampling times and against the real market scenario. Comparison done with the Monte Carlo simulation which was set as our main reference point reveals that our pricing formula gains almost the same precision in a shorter execution time.
A hierarchical exact accelerated stochastic simulation algorithm
NASA Astrophysics Data System (ADS)
Orendorff, David; Mjolsness, Eric
2012-12-01
A new algorithm, "HiER-leap" (hierarchical exact reaction-leaping), is derived which improves on the computational properties of the ER-leap algorithm for exact accelerated simulation of stochastic chemical kinetics. Unlike ER-leap, HiER-leap utilizes a hierarchical or divide-and-conquer organization of reaction channels into tightly coupled "blocks" and is thereby able to speed up systems with many reaction channels. Like ER-leap, HiER-leap is based on the use of upper and lower bounds on the reaction propensities to define a rejection sampling algorithm with inexpensive early rejection and acceptance steps. But in HiER-leap, large portions of intra-block sampling may be done in parallel. An accept/reject step is used to synchronize across blocks. This method scales well when many reaction channels are present and has desirable asymptotic properties. The algorithm is exact, parallelizable and achieves a significant speedup over the stochastic simulation algorithm and ER-leap on certain problems. This algorithm offers a potentially important step towards efficient in silico modeling of entire organisms.
NASA Astrophysics Data System (ADS)
Raymond, Neil; Iouchtchenko, Dmitri; Roy, Pierre-Nicholas; Nooijen, Marcel
2018-05-01
We introduce a new path integral Monte Carlo method for investigating nonadiabatic systems in thermal equilibrium and demonstrate an approach to reducing stochastic error. We derive a general path integral expression for the partition function in a product basis of continuous nuclear and discrete electronic degrees of freedom without the use of any mapping schemes. We separate our Hamiltonian into a harmonic portion and a coupling portion; the partition function can then be calculated as the product of a Monte Carlo estimator (of the coupling contribution to the partition function) and a normalization factor (that is evaluated analytically). A Gaussian mixture model is used to evaluate the Monte Carlo estimator in a computationally efficient manner. Using two model systems, we demonstrate our approach to reduce the stochastic error associated with the Monte Carlo estimator. We show that the selection of the harmonic oscillators comprising the sampling distribution directly affects the efficiency of the method. Our results demonstrate that our path integral Monte Carlo method's deviation from exact Trotter calculations is dominated by the choice of the sampling distribution. By improving the sampling distribution, we can drastically reduce the stochastic error leading to lower computational cost.
Leng, Yonggang; Fan, Shengbo
2018-01-01
Mechanical fault diagnosis usually requires not only identification of the fault characteristic frequency, but also detection of its second and/or higher harmonics. However, it is difficult to detect a multi-frequency fault signal through the existing Stochastic Resonance (SR) methods, because the characteristic frequency of the fault signal as well as its second and higher harmonics frequencies tend to be large parameters. To solve the problem, this paper proposes a multi-frequency signal detection method based on Frequency Exchange and Re-scaling Stochastic Resonance (FERSR). In the method, frequency exchange is implemented using filtering technique and Single SideBand (SSB) modulation. This new method can overcome the limitation of "sampling ratio" which is the ratio of the sampling frequency to the frequency of target signal. It also ensures that the multi-frequency target signals can be processed to meet the small-parameter conditions. Simulation results demonstrate that the method shows good performance for detecting a multi-frequency signal with low sampling ratio. Two practical cases are employed to further validate the effectiveness and applicability of this method. PMID:29693577
A Two-Step Approach to Uncertainty Quantification of Core Simulators
Yankov, Artem; Collins, Benjamin; Klein, Markus; ...
2012-01-01
For the multiple sources of error introduced into the standard computational regime for simulating reactor cores, rigorous uncertainty analysis methods are available primarily to quantify the effects of cross section uncertainties. Two methods for propagating cross section uncertainties through core simulators are the XSUSA statistical approach and the “two-step” method. The XSUSA approach, which is based on the SUSA code package, is fundamentally a stochastic sampling method. Alternatively, the two-step method utilizes generalized perturbation theory in the first step and stochastic sampling in the second step. The consistency of these two methods in quantifying uncertainties in the multiplication factor andmore » in the core power distribution was examined in the framework of phase I-3 of the OECD Uncertainty Analysis in Modeling benchmark. With the Three Mile Island Unit 1 core as a base model for analysis, the XSUSA and two-step methods were applied with certain limitations, and the results were compared to those produced by other stochastic sampling-based codes. Based on the uncertainty analysis results, conclusions were drawn as to the method that is currently more viable for computing uncertainties in burnup and transient calculations.« less
Calderon, Karynna; Dadisman, Shawn V.; Kindinger, Jack G.; Davis, Jeffrey B.; Flocks, James G.; Wiese, Dana S.
2004-01-01
In August and September of 1993 and January of 1994, the U.S. Geological Survey, under a cooperative agreement with the St. Johns River Water Management District (SJRWMD), conducted geophysical surveys of Kingsley Lake, Orange Lake, and Lowry Lake in northeast Florida. This report serves as an archive of unprocessed digital boomer seismic reflection data, trackline maps, navigation files, GIS information, observer's logbook, Field Activity Collection System (FACS) logs, and formal FGDC metadata. A filtered and gained GIF image of each seismic profile is also provided. Refer to the Acronyms page for expansion of acronyms and abbreviations used in this report. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU). Examples of SU processing scripts and in-house (USGS) software for viewing SEG-Y files (Zihlman, 1992) are also provided. The data archived here were collected under a cooperative agreement with the St. Johns River Water Management District as part of the USGS Lakes and Coastal Aquifers (LCA) Project. For further information about this study, refer to http://coastal.er.usgs.gov/stjohns, Kindinger and others (1994), and Kindinger and others (2000). The USGS Florida Integrated Science Center (FISC) - Coastal and Watershed Studies in St. Petersburg, Florida, assigns a unique identifier to each cruise or field activity. For example, 93LCA01 tells us the data were collected in 1993 for the Lakes and Coastal Aquifers (LCA) Project and the data were collected during the first field activity for that project in that calendar year. For a detailed description of the method used to assign the field activity ID, see http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html. The boomer is an acoustic energy source that consists of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled at the sea surface and when discharged emits a short acoustic pulse, or shot, that propagates through the water and sediment column. The acoustic energy is reflected at density boundaries (such as the seafloor or sediment layers beneath the seafloor), detected by the receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (e.g., 0.5 s) and recorded for specific intervals of time (e.g., 100 ms). In this way, a two-dimensional vertical image of the shallow geologic structure beneath the ship track is produced. Acquisition geometery for 94LCA01 is recorded in the operations logbook. No logbook exists for 93LCA01. Table 1 displays acquisition parameters for both field activities. For more information about the acquisition equipment used, refer to the FACS equipment logs. The unprocessed seismic data are stored in SEG-Y format (Barry and others, 1975). For a detailed description of the data format, refer to the SEG-Y Format page. See the How To Download SEG-Y Data page for more information about these files. Processed profiles can be viewed as GIF images from the Profiles page. Refer to the Software page for details about the processing and examples of the processing scripts. Detailed information about the navigation systems used for each field activity can be found in Table 1 and the FACS equipment logs. To view the trackline maps and navigation files, and for more information about these items, see the Navigation page. The original trace files were recorded in nonstandard ELICS format and later converted to standard SEG-Y format. The original trace files for 94LCA01 lines ORJ127_1, ORJ127_3, and ORJ131_1 were divided into two or more trace files (e.g., ORJ127_1 became ORJ127_1a and ORJ127_1b) because the original total number of traces exceeded the maximum allowed by the processing system. Digital data were not recoverable for 93LCA
NASA Astrophysics Data System (ADS)
Venkatesh, Aranya
Increasing concerns about the environmental impacts of fossil fuels used in the U.S. transportation and electricity sectors have spurred interest in alternate energy sources, such as natural gas and biofuels. Life cycle assessment (LCA) methods can be used to estimate the environmental impacts of incumbent energy sources and potential impact reductions achievable through the use of alternate energy sources. Some recent U.S. climate policies have used the results of LCAs to encourage the use of low carbon fuels to meet future energy demands in the U.S. However, the LCA methods used to estimate potential reductions in environmental impact have some drawbacks. First, the LCAs are predominantly based on deterministic approaches that do not account for any uncertainty inherent in life cycle data and methods. Such methods overstate the accuracy of the point estimate results, which could in turn lead to incorrect and (consequent) expensive decision-making. Second, system boundaries considered by most LCA studies tend to be limited (considered a manifestation of uncertainty in LCA). Although LCAs can estimate the benefits of transitioning to energy systems of lower environmental impact, they may not be able to characterize real world systems perfectly. Improved modeling of energy systems mechanisms can provide more accurate representations of reality and define more likely limits on potential environmental impact reductions. This dissertation quantitatively and qualitatively examines the limitations in LCA studies outlined previously. The first three research chapters address the uncertainty in life cycle greenhouse gas (GHG) emissions associated with petroleum-based fuels, natural gas and coal consumed in the U.S. The uncertainty in life cycle GHG emissions from fossil fuels was found to range between 13 and 18% of their respective mean values. For instance, the 90% confidence interval of the life cycle GHG emissions of average natural gas consumed in the U.S was found to range between -8 to 9% (17%) of the mean value of 66 g CO2e/MJ. Results indicate that uncertainty affects the conclusions of comparative life cycle assessments, especially when differences in average environmental impacts between two competing fuels/products are small. In the final two research chapters of this thesis, system boundary limitations in LCA are addressed. Simplified economic dispatch models for are developed to examine changes in regional power plant dispatch that occur when coal power plants are retired and when natural gas prices drop. These models better reflect reality by estimating the order in which existing power plants are dispatched to meet electricity demand based on short-run marginal costs. Results indicate that the reduction in air emissions are lower than suggested by LCA studies, since they generally do not include the complexity of regional electricity grids, predominantly driven by comparative fuel prices. For instance, comparison, this study estimates 7-15% reductions in emissions with low natural gas prices. Although this is a significant reduction in itself, it is still lower than the benefits reported in traditional life cycle comparisons of coal and natural gas-based power (close to 50%), mainly due to the effects of plant dispatch.
NASA Astrophysics Data System (ADS)
Pacetti, Tommaso; Caporali, Enrica; Federici, Giorgio
2015-04-01
This study analyzes the production of biogas from aerobic digestion of energy crops. The production of biogas is an important case study because its spread, similar to other sources of bioenergy, creates questions about the environmental effects, the competition in the food market as well as the progressive change of land use. In particular is hereby analyzed the nexus between bioenergy production and water, which plays a key role because water resources are often the limiting factor in energy production from energy crops. The environmental performances of biogas production were analyzed through Water Footprint (WF) and Life cycle assessment (LCA): the integration of LCA and WF represents an attempt of taking advantage of their complementary strengths in environmental assessment, trying to give a comprehensive analysis of bioenergy production sustainability. Eighteen scenarios were considered, trying to figure out the performances of different combinations of locations (north, center, south Italy), crops (maize, sorghum, wheat) and treatments (anaerobic digestion with water dilution or manure co-digestion). WF assessment shows that cultivation phase is the most impacting on water resource use along the entire system life cycle. In particular, water requirements for crop growth shows that sorghum is the more water saver crop (in terms of consumptive water use to produce the amount of crop needed to produce 1 GJ of biogas energy content). Moreover WF investigates the kind of water use and shows that wheat, despite being the most intensive water user, exploits more green water than the other crops.WF was evaluated with respect to water stress indicators for the Italian territory, underlining the higher criticalities associated with water use in southern Italy and identifying consumptive blue water use, in this area, as the main hotspot. Therefore biogas production from energy crops in southern Italy is unsustainable from a water management perspective. At a basin scale, WF results obtained for central Italy were compared with local water availability (Merse river basin), pinpointing the time dependence of the sustainability. This analysis highlights that wheat, even if more water intensive than other crops, has a WF that not burdens the driest period as maize and sorghum does, underlying importance of assessing the temporal distribution of water use. Further, WF was combined with LCA. First WF results were used as input for LCA inventory, and then some indicators of the selected impact assessment method were analyzed to obtain additional information mainly on water resource quality. The overall results show that biogas production from energy crops has in general negative impacts (i.e. beneficial environmental performances), due to the savings associated with avoided conventional energy production, for all the indicators except water depletion, fresh water ecotoxicity and marine ecotoxicity. WF and LCA results show the benefit of coupling the two methods. Since WF focuses on the water use and the LCA focus on an extended range of environmental loads, creating synergies between these two approaches can help having a comprehensive assessment and a better insight in the Nexus.
2014-01-01
Background Cognitive function, psychosocial wellbeing and health are important domains of function. Consistencies and inconsistencies in patterns of wellbeing across these domains may be informative about wellbeing in old age and the ways it is manifested amongst individuals. In this study we investigated whether there were groups of individuals with different profiles of scores across these domains. We also aimed to identify characteristics of any evident groups by comparing them on variables that were not used in identifying the groups. Methods The sample was the Lothian Birth Cohort 1936, which included 1091 participants born in 1936. They are a community-dwelling, narrow-age-range sample of 70-year-olds. Most had taken part in the Scottish Mental Survey 1947 at an average age of 11, making available a measure of childhood intelligence. We used latent class analysis (LCA) to explore possible profiles using 9 variables indicating cognitive functioning, psychosocial wellbeing and health status. Demographic, personality, and lifestyle variables – none of which were used in the LCA – were used to characterize the resulting profile groups. Results We accepted a 3-group solution, which we labeled High Wellbeing (65.3%), Low Cognition (20.3%), and Low Bio-Psychosocial (14.5%). Notably, the High Wellbeing group had significantly higher childhood IQ, lower Neuroticism scores, and a lower percentage of current smokers than the other 2 groups. Conclusion The majority of individuals were functioning generally well; however, there was evidence of the presence of groups with different profiles, which may be explained in part in terms of cognitive ability differences. Results suggested that higher life-long intelligence, personality traits associated with less mental distress, and basic health practices such as avoiding smoking are important associates of wellbeing in old age. PMID:24754844
Barton, Yakov A; Miller, Lisa
2015-06-01
We investigate the relationship between personal spirituality and positive psychology traits as potentially presented in multiple profiles, rather than monolithically across a full sample. A sample of 3966 adolescents and emerging adults (aged 18-25, mean = 20.19, SD = 2.08) and 2014 older adults (aged 26-82, mean = 38.41, SD = 11.26) completed a survey assessing daily spiritual experiences (relationship with a Higher Power and sense of a sacred world), forgiveness, gratitude, optimism, grit, and meaning. To assess the relative protective benefits of potential profiles, we also assessed the level of depressive symptoms and frequency of substance use (tobacco, marijuana, alcohol, and heavy alcohol use). Latent class analysis (LCA) was used to examine common subgroupings of study participants across report on personal spirituality and positive psychology scales in each age cohort, with potential difference between latent classes then tested in level of depressive symptoms and degree of substance use. LCA determined a four-class and a three-class best-fitting models for the younger and older cohorts, respectively. Level of personal spirituality and level of positive psychology traits were found to coincide in 83 % of adolescents and emerging adults and in 71 % of older adults, suggesting personal spirituality and positive psychology traits go hand in hand. A minority subgroup of "virtuous humanists" showed high levels of positive psychology traits but low levels of personal spirituality, across both age cohorts. Whereas level of depression was found to be inversely associated with positive psychology traits and personal spirituality, uniquely personal spirituality was protective against degree of substance use across both age cohorts. Overall interpretation of the study findings suggests that personal spirituality may be foundational to positive psychology traits in the majority of people.
Correlative Stochastic Optical Reconstruction Microscopy and Electron Microscopy
Kim, Doory; Deerinck, Thomas J.; Sigal, Yaron M.; Babcock, Hazen P.; Ellisman, Mark H.; Zhuang, Xiaowei
2015-01-01
Correlative fluorescence light microscopy and electron microscopy allows the imaging of spatial distributions of specific biomolecules in the context of cellular ultrastructure. Recent development of super-resolution fluorescence microscopy allows the location of molecules to be determined with nanometer-scale spatial resolution. However, correlative super-resolution fluorescence microscopy and electron microscopy (EM) still remains challenging because the optimal specimen preparation and imaging conditions for super-resolution fluorescence microscopy and EM are often not compatible. Here, we have developed several experiment protocols for correlative stochastic optical reconstruction microscopy (STORM) and EM methods, both for un-embedded samples by applying EM-specific sample preparations after STORM imaging and for embedded and sectioned samples by optimizing the fluorescence under EM fixation, staining and embedding conditions. We demonstrated these methods using a variety of cellular targets. PMID:25874453
Bisinella de Faria, A B; Spérandio, M; Ahmadi, A; Tiruta-Barna, L
2015-11-01
With a view to quantifying the energy and environmental advantages of Urine Source-Separation (USS) combined with different treatment processes, five wastewater treatment plant (WWTP) scenarios were compared to a reference scenario using Dynamic Modelling (DM) and Life Cycle Assessment (LCA), and an integrated DM-LCA framework was thus developed. Dynamic simulations were carried out in BioWin(®) in order to obtain a realistic evaluation of the dynamic behaviour and performance of plants under perturbation. LCA calculations were performed within Umberto(®) using the Ecoinvent database. A Python™ interface was used to integrate and convert simulation data and to introduce them into Umberto(®) to achieve a complete LCA evaluation comprising foreground and background processes. Comparisons between steady-state and dynamic simulations revealed the importance of considering dynamic aspects such as nutrient and flow peaks. The results of the evaluation highlighted the potential of the USS scenario for nutrient recovery whereas the Enhanced Primary Clarification (EPC) scenario gave increased biogas production and also notably decreased aeration consumption, leading to a positive energy balance. Both USS and EPC scenarios also showed increased stability of plant operation, with smaller daily averages of total nitrogen and phosphorus. In this context, USS and EPC results demonstrated that the coupled USS + EPC scenario and its combinations with agricultural spreading of N-rich effluent and nitritation/anaerobic deammonification could present an energy-positive balance with respectively 27% and 33% lower energy requirements and an increase in biogas production of 23%, compared to the reference scenario. The coupled scenarios also presented lesser environmental impacts (reduction of 31% and 39% in total endpoint impacts) along with effluent quality well within the specified limits. The marked environmental performance (reduction of global warming) when nitrogen is used in agriculture shows the importance of future research on sustainable solutions for nitrogen recovery. The contribution analysis of midpoint impacts also showed hotspots that it will be important to optimize further, such as plant infrastructure and direct N2O emissions. Copyright © 2015 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Pfister, S.; Bayer, P.; Koehler, A.; Hellweg, S.
2009-04-01
Life Cycle Assessment (LCA) represents a methodological framework for analyzing the total environmental impact of any product or service of our daily life. After tracking all associated emissions and the consumption of resources, this impact is expressed with respect to a few common impact categories. These are supposed to reflect major societal and environmental priorities. However, despite their central role in environmental processes, to date hydrological as well as hydrogeological aspects are only rarely considered in LCA. Compared with standard impact categories within LCA, water is special. In contrast to other abiotic resources such as crude oil, it can be replenished. Total freshwater resources are immense, but not evenly distributed and often scarce in regions of high demand. Consequently, threads to natural water bodies have immense spatial dependency. Setting up functional relationships in order to derive a generally valid and practicable evaluation is tedious due to the complex, insufficiently understood, and uncertain natural processes involved. LCA that includes the environmental effects of water consumption means global indirect water resource management. It supports goal-directed consumer behaviour that aims to reduce pressure on natural water systems. By developing a hydrologically-based assessment of potential impacts from human interaction with natural water bodies, "greener" products can be prioritised. More sustainable and environmentally friendly water management is the result. The proposed contribution presents an operational assessment method of global surface water consumption for impacts on human health and ecosystem quality within a LCA framework. A major focus is the issue of how such global assessment helps to quantify potential impacts from water-intensive production in developing countries, where the means for proper water management are often limited. We depict a compensation scheme for impacts related to water consumption that allows agriculture-dependent regions to produce and export crops while customers can compensate the related environmental impacts and/or improving the integrated water resource management by paying a premium. This allows for efficient international food production, strengthening sustainability regarding social, environmental and economic issues related to water and trade.
The role of leaf cutter ants on soil organic carbon dynamics in a wet tropical forest
NASA Astrophysics Data System (ADS)
Schwendenmann, L.; Meredyth-Young, M.; Dierick, D.; Allen, M. F.; Harmon, T. C.; Oberbauer, S. F.; Rundel, P.; Trahan, N. A.; Zelikova, T. J.
2016-12-01
Tropical forest ecosystems play an important role in the global carbon (C) cycle. Neotropical forests are significantly influenced by leaf cutter ants (LCA) which are the most important herbivore in these systems. LCA cut fresh leaves and bring large amounts of plant biomass into their nests to grow their fungus gardens. The excavation and continual maintenance of their large nests modifies soil characteristics and biogeochemistry with direct and indirect impacts on soil organic carbon (SOC) dynamics. The aim of this study was to quantify the effects of LCA (Atta cephalotes) on soil C mineralization, carbon degrading enzymes (β-glucosidase and α-glucosidase), and labile soil C (hot water extractable carbon) across a 1 m soil depth profile and comparing between two different soils (residual and alluvial) and forest types (primary and secondary) in a wet tropical rainforest in Costa Rica. We hypothesized that C mineralization rates will be higher inside LCA nests due to continual input of fresh organic matter, as evidenced by higher microbial biomass and carbon degrading enzymes. Similarly, we expected more labile C inside nests. All soil C parameters were highly variable among sites and between nests and controls. Carbon mineralization rates ranged from 0.02 to 0.2 µmol C h-1 g soil-1 during the initial decay phase which lasted approximately 6 days during soil incubation. The highest respiration rates were measured in the top 20 cm of the primary forest residual soil. Contrary to our expectations, C mineralization rates were higher in control soils, where C degrading enzymes were in higher concentrations (around 250 µmol). The labile soil C concentrations were variable across sites (2-25 mg C g soil-1) and higher in the upper soil profiles, but no significant differences were found between controls and nests. Our results indicate greater heterogeneity inside the nests than previously expected. We explain our findings in terms of the removal of leaf and organic matter from the nest surface by LCA, which may have led to a reduction in available carbon substrate for microbial decomposition.
Pennington, David; Crettaz, Pierre; Tauxe, Annick; Rhomberg, Lorenz; Brand, Kevin; Jolliet, Olivier
2002-10-01
In Part 1 of this article we developed an approach for the calculation of cancer effect measures for life cycle assessment (LCA). In this article, we propose and evaluate the method for the screening of noncancer toxicological health effects. This approach draws on the noncancer health risk assessment concept of benchmark dose, while noting important differences with regulatory applications in the objectives of an LCA study. We adopt the centraltendency estimate of the toxicological effect dose inducing a 10% response over background, ED10, to provide a consistent point of departure for default linear low-dose response estimates (betaED10). This explicit estimation of low-dose risks, while necessary in LCA, is in marked contrast to many traditional procedures for noncancer assessments. For pragmatic reasons, mechanistic thresholds and nonlinear low-dose response curves were not implemented in the presented framework. In essence, for the comparative needs of LCA, we propose that one initially screens alternative activities or products on the degree to which the associated chemical emissions erode their margins of exposure, which may or may not be manifested as increases in disease incidence. We illustrate the method here by deriving the betaED10 slope factors from bioassay data for 12 chemicals and outline some of the possibilities for extrapolation from other more readily available measures, such as the no observable adverse effect levels (NOAEL), avoiding uncertainty factors that lead to inconsistent degrees of conservatism from chemical to chemical. These extrapolations facilitated the initial calculation of slope factors for an additional 403 compounds; ranging from 10(-6) to 10(3) (risk per mg/kg-day dose). The potential consequences of the effects are taken into account in a preliminary approach by combining the betaED10 with the severity measure disability adjusted life years (DALY), providing a screening-level estimate of the potential consequences associated with exposures, integrated over time and space, to a given mass of chemical released into the environment for use in LCA.
A straightforward method to compute average stochastic oscillations from data samples.
Júlvez, Jorge
2015-10-19
Many biological systems exhibit sustained stochastic oscillations in their steady state. Assessing these oscillations is usually a challenging task due to the potential variability of the amplitude and frequency of the oscillations over time. As a result of this variability, when several stochastic replications are averaged, the oscillations are flattened and can be overlooked. This can easily lead to the erroneous conclusion that the system reaches a constant steady state. This paper proposes a straightforward method to detect and asses stochastic oscillations. The basis of the method is in the use of polar coordinates for systems with two species, and cylindrical coordinates for systems with more than two species. By slightly modifying these coordinate systems, it is possible to compute the total angular distance run by the system and the average Euclidean distance to a reference point. This allows us to compute confidence intervals, both for the average angular speed and for the distance to a reference point, from a set of replications. The use of polar (or cylindrical) coordinates provides a new perspective of the system dynamics. The mean trajectory that can be obtained by averaging the usual cartesian coordinates of the samples informs about the trajectory of the center of mass of the replications. In contrast to such a mean cartesian trajectory, the mean polar trajectory can be used to compute the average circular motion of those replications, and therefore, can yield evidence about sustained steady state oscillations. Both, the coordinate transformation and the computation of confidence intervals, can be carried out efficiently. This results in an efficient method to evaluate stochastic oscillations.