Science.gov

Sample records for lead renovation repair

  1. 76 FR 27044 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-10

    ... exposures that cause serious lead poisonings, especially in children under age 6, who are particularly... AGENCY Lead-Based Paint Renovation, Repair and Painting, and Pre- Renovation Education Activities in...(c)(3) of TSCA, 15 U.S.C. 2682(c)(3), and a lead-based paint pre-renovation education program...

  2. 75 FR 39524 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-09

    ... pamphlet will help to reduce the exposures that cause serious lead poisonings, especially in children under... AGENCY Lead-Based Paint Renovation, Repair and Painting, and Pre- Renovation Education Activities in... TSCA, 15 U.S.C. 2682(c)(3), and a lead-based paint pre-renovation education program in accordance...

  3. 75 FR 6383 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-09

    ... exposures that cause serious lead poisonings, especially in children under age 6, who are particularly... AGENCY Lead-Based Paint Renovation, Repair and Painting, and Pre- Renovation Education Activities in... accordance with section 402(c)(3) of TSCA, 15 U.S.C. 2682(c)(3), and a lead-based paint...

  4. 75 FR 38959 - Lead; Clearance and Clearance Testing Requirements for the Renovation, Repair, and Painting...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    ... Renovation, Repair, and Painting Program; Reopening of Comment Period AGENCY: Environmental Protection Agency... Painting Program (RRP) rule. This document reopens the comment period for an additional 30 days. DATES... several revisions to the 2008 Lead Renovation, Repair, and Painting Program (RRP) rule. The...

  5. Revised Interim Final Consolidated Enforcement Response and Penalty Policy for the Pre-Renovation Education Rule; Renovation, Repair and Painting Rule; and Lead-Based Paint Activities Rule

    EPA Pesticide Factsheets

    This is the revised version of the Interim Final Consolidated Enforcement Response and Penalty Policy for the Pre-Renovation Education Rule; Renovation, Repair and Painting Rule; and Lead-Based Paint Activities Rule.

  6. 75 FR 13127 - Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... the exposures that cause serious lead poisonings, especially in children under age 6, who are... AGENCY Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied... Action Apply to Me? This action is directed to the public in general, to entities offering Lead...

  7. 75 FR 51808 - Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-23

    ... poisonings, especially in children under age 6, who are particularly susceptible to the hazards of lead... Program are found in R23-24.6-PB-Section 14.0 of the Rhode Island Rules and Regulations For Lead Poisoning...-9] Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child...

  8. Approach for Estimating Exposures and Incremental Health Effects from Lead During Renovation, Repair, and Painting Activities in Public and Commercial Buildings

    EPA Science Inventory

    Approach for Estimating Exposures and Incremental Health Effects from Lead During Renovation, Repair, and Painting Activities in Public and Commercial Buildings” (Technical Approach Document). Also available for public review and comment are two supplementary documents: the detai...

  9. Approach for Estimating Exposures and Incremental Health Effects from Lead Due to Renovation Repair and Painting Activities in Public and Commercial Buildings

    EPA Pesticide Factsheets

    Approach for Estimating Exposures and Incremental Health Effects from Lead Due to Renovation Repair and Painting Activities in Public and Commercial Buildings: links to documents at www.regulations.gov, links to PDFs related to Approach document

  10. 75 FR 24848 - Lead; Renovation, Repair, and Painting Program for Public and Commercial Buildings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-06

    ..., such as the widely used IQ score, and in academic achievement as assessed by various standardized tests... for IQ, suggesting that lead-sensitive neuropsychological processing and learning factors not...-36). With regard to potential implications of lead effects on IQ, the Criteria Document...

  11. 75 FR 25037 - Lead; Clearance and Clearance Testing Requirements for the Renovation, Repair, and Painting Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-06

    ... intelligence test results, such as the widely used IQ score, and in academic achievement as assessed by various... for IQ, suggesting that lead-sensitive neuropsychological processing and learning factors not..., pp. 8-29 to 8- 30). With regard to potential implications of lead effects on IQ, the...

  12. 76 FR 12106 - Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-04

    ... the exposures that cause serious lead poisonings, especially in children under age 6, who are... Kansas Department of Health and Environment (KDHE) to operate a lead poisoning prevention program in... other individuals who request it in order to advance the success of the lead poisoning...

  13. Making the Case for Facility Modernization, Renovation, and Repairs

    ERIC Educational Resources Information Center

    Kwok, Michael

    2009-01-01

    Like homeowners with limited budgets and a long list of repairs, school districts often must make tough choices when it comes to deciding what building systems to modernize, renovate, or repair--or when to build new facilities. With $44 billion now available for states and schools under the American Recovery and Reinvestment Act of 2009, stimulus…

  14. The contribution of housing renovation to children’s blood lead levels: a cohort study

    PubMed Central

    2013-01-01

    Background Routine renovation of older housing is a risk factor for childhood lead poisoning, but the contribution to children’s blood lead levels is poorly defined for children with lower exposure levels. Methods We examined a prospective cohort of 276 children followed from 6 to 24 months of age. We conducted surveys of renovation activities and residential lead hazards and obtained blood lead level (B-Pb) every six months. We analyzed B-Pb in a repeated measures design using a mixed effects linear model. Results Parent reported interior renovation ranged from 11 to 25% of housing units at the four, 6-month periods. In multivariable analysis, children whose housing underwent interior renovation had a 12% higher mean B-Pb by two years of age compared with children whose housing units were not renovated (p < 0.01). The time between renovation and the child blood lead sample was associated with higher B-Pb (p-value for trend <0.01); compared to children in non-renovated housing, children whose housing units underwent renovation in the prior month had a 17% higher mean B-Pb at two years of age, whereas children whose housing renovation occurred in the prior 2–6 months had an 8% higher mean B-Pb. We also found an association between higher paint lead loading, measured using an X-ray fluorescence (XRF) based paint lead index, and child B-Pb (p = 0.02); for every 10 mg/cm2 increase in paint lead loading index there was a 7.5% higher mean childhood B-Pb. Conclusions In an analysis of data collected before the recent changes to Environmental Protection Agency’s Lead, Renovation, Repair and Painting Rule, routine interior housing renovation was associated with a modest increase in children’s B-Pb. These results are important for the provision of clinical advice, for housing and public health professionals, and for policymakers. PMID:23981571

  15. Worker lead exposures during renovation of homes with lead-based paint

    SciTech Connect

    Sussell, A.; Gittleman, J.; Singal, M.

    1998-11-01

    The authors evaluated lead exposures among full-time home renovators and part-time volunteers working primarily in pre-1960 homes with lead-based paint. Potentially hazardous lead exposures were measured during two tasks: exterior dry scraping and wet scraping. Maximum exposures were 120 and 63 {micro}g/m{sup 3}, respectively. Exposures during other tasks, including general repair, weatherization, exterior scraping/painting, window replacement, demolition, and plumbing, were low, as were all 13 full-shift personal exposures. Blood lead levels for full-time workers ranged up to 17.5 {micro}g/dl, with a GM of 5.2 {micro}g/dl; the GM for volunteers was 3.2 {micro}g/dl. All of the paint samples collected from work surfaces had detectable amounts of lead, with 65% of the work surfaces tested having an average lead concentration of >0.5%.

  16. 76 FR 55883 - Department of Defense Program for Construction, Renovation, Repair or Expansion of Public Schools...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-09

    ... the proposed project design decision; A current cost estimate, including the estimated cost for... review by OEA. Eligible project costs may include project administration, architectural/engineering... furnishings, contingency costs, demolition of the facilities being replaced, renovated or repaired, and...

  17. 78 FR 25062 - Program for Construction, Renovation, Repair or Expansion of Public Schools Located on Military...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-29

    ... on Military Installations AGENCY: Office of Economic Adjustment (OEA), Department of Defense (DoD... program to construct, renovate, repair, or expand elementary and ] secondary public schools on military... Schools Located on Military Installations. Announcement Type: Federal Funding Opportunity. Catalog...

  18. Monitoring steel bridge renovation using lead isotopic tracing.

    PubMed

    Salome, Fred; Gulson, Brian; Chiaradia, Massimo; Davis, Jeffrey; Morris, Howard

    2017-05-01

    Monitoring removal of lead (Pb) paint from steel structures usually involves analysis of environmental samples for total lead and determination of blood Pb levels of employees involved in the Pb paint removal. We used high precision Pb isotopic tracing for a bridge undergoing Pb paint removal to determine if Pb in the environmental and blood samples originated from the bridge paint. The paint system on the bridge consisted of an anti-corrosive red Pb primer top-coated with a Micaceous Iron Oxide (MIO) alkyd. Analysis of the red Pb primer gave uniform isotopic ratios indicative of Pb from the geologically-ancient Broken Hill mines in western New South Wales, Australia. Likewise waste abrasive material, as anticipated, had the same isotopic composition as the paint. The isotopic ratios for other samples lay on 2 separate linear arrays on a(207)Pb/(204)Pb versus (206)Pb/(204)Pb diagram, one largely defined by gasoline and the majority of the ambient air data, and the other by data for one sample each of gasoline and ambient air and underwater sediments. Isotopic ratios in background ambient air samples for the project were characteristic of leaded gasoline. Air sampling during paint removal showed a contribution of paint Pb ranging from about 20 to 40%. Isotopic ratios in the blood of 8 employees prior to the commencement of work showed that 6 of these had been previously exposed to the Broken Hill Pb possibly from earlier bridge paint removal projects. One subject appeared to have increased exposure to Pb probably from the paint renovations.

  19. The Lead-Safe Certified Guide to Renovate Right

    MedlinePlus

    ... gun at temperatures greater than 1100°F. There work places will eliminate dust, but some renovation methods make less dust than others. Contractors may choose to use various methods to minimize dust ... Clean up thoroughly. The work area should be cleaned up daily to keep ...

  20. Get the Lead Out (Prevention, Intervention and Renovation).

    ERIC Educational Resources Information Center

    Illinois State Dept. of Public Health, Springfield.

    Three brochures offer guidelines on preventing lead poisoning in children, lowering lead blood levels in children, and safely removing leaded paint from homes. The brochure on prevention of lead poisoning explains sources of lead, how lead affects a child, the importance of screening a child for lead poisoning, and ways to protect a child from…

  1. A case report of lead paint poisoning during renovation of a Victorian farmhouse

    SciTech Connect

    Marino, P.E.; Landrigan, P.J.; Graef, J.; Nussbaum, A.; Bayan, G.; Boch, K.; Boch, S. )

    1990-10-01

    We describe a series of four cases of childhood lead poisoning and two cases of adult lead toxicity in a professional family exposed to lead dust and fume during renovation of a rural farmhouse. Initial blood lead levels in the children ranged from 2.70 to 4.20 microM/L (56 to 87 microns/dl) and all four required chelation therapy. Lead-based paint poisoning, a well recognized entity among young children in poor, urban neighborhoods, is not confined exclusively to such areas.

  2. AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON SOUTH SIDE OF SOUTH WING. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  3. AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON SOUTH SIDE OF SOUTH WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  4. Lead exposure and radiator repair work.

    PubMed

    Lussenhop, D H; Parker, D L; Barklind, A; McJilton, C

    1989-11-01

    In 1986, the ambient air for lead in radiator repair shops in the Minneapolis-St. Paul metropolitan area exceeded the Occupational Safety and Health Administration (OSHA) action level in nine of 12 shops sampled by Minnesota OSHA. We therefore sought to determine the prevalence of lead exposure/toxicity in this industry. Thirty-five radiator shops were identified, 30 were visited, and 53 workers were studied. The mean blood lead level was 1.53 (range 0.24-2.80). Seventeen individuals had blood lead levels greater than or equal to 1.93 mumol/L (40 micrograms/dl). The mean zinc protoporphyrin level (ZPP) was 0.55 mumol/L (range 0.16-1.43). No single worksite or personal characteristic was a strong determinant of either blood lead or ZPP level.

  5. Lead exposure and radiator repair work

    SciTech Connect

    Lussenhop, D.H.; Parker, D.L.; Barklind, A.; McJilton, C. )

    1989-11-01

    In 1986, the ambient air for lead in radiator repair shops in the Minneapolis-St. Paul metropolitan area exceeded the Occupational Safety and Health Administration (OSHA) action level in nine of 12 shops sampled by Minnesota OSHA. We therefore sought to determine the prevalence of lead exposure/toxicity in this industry. Thirty-five radiator shops were identified, 30 were visited, and 53 workers were studied. The mean blood lead level was 1.53 (range 0.24-2.80). Seventeen individuals had blood lead levels greater than or equal to 1.93 mumol/L (40 micrograms/dl). The mean zinc protoporphyrin level (ZPP) was 0.55 mumol/L (range 0.16-1.43). No single worksite or personal characteristic was a strong determinant of either blood lead or ZPP level.

  6. Control of excessive lead exposure in radiator repair workers.

    PubMed

    1991-03-01

    In 1988, 83 automotive repair workers with blood lead levels (BLLs) greater than 25 micrograms/dL were reported to state health departments in the seven states that collaborated with CDC's National Institute for Occupational Safety and Health (NIOSH) in maintaining registries of elevated BLLs in adults. In 18 (22%) of these 83 persons, BLLs were greater than 50 micrograms/dL. Among automotive repair workers for whom a job category was specified, radiator repair work was the principal source of lead exposure. The major sources of exposure for radiator repair workers are lead fumes generated during soldering and lead dust produced during radiator cleaning. This report summarizes current BLL surveillance data for radiator repair workers and describes three control technologies that are effective in reducing lead exposures in radiator repair shops.

  7. Lead-Based Paint and Demolition

    EPA Pesticide Factsheets

    The Lead Renovation, Repair, and Painting Rule does not apply to total demolition of a structure. Learn about EPA recommended lead-safe practices during total demolition activities to prevent and minimize exposure to lead.

  8. Blood lead levels in radiator repair workers in Colorado.

    PubMed

    Dalton, C B; McCammon, J B; Hoffman, R E; Baron, R C

    1997-01-01

    A laboratory-based blood lead surveillance system in Colorado identified radiator repair workers as having the highest blood lead levels of all worker groups reported. A survey of 42 radiator repair shops in ten locales throughout Colorado was undertaken to estimate the prevalence of workers with elevated blood lead levels > 25 micrograms/dL. The survey was designed to test the sensitivity of the surveillance system and to assess working conditions and practices in the radiator repair industry in Colorado. Of 63 workers, 39 (62%) had blood lead levels > 25 micrograms/dL. The sensitivity of the surveillance system for detecting radiator repair workers with elevated blood lead levels was estimated at 11%. None of the radiator repair shops had adequate local exhaust ventilation. Work practice and engineering modifications are needed to reduce lead exposure in this industry.

  9. 76 FR 56136 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-12

    ... and requests for a public hearing may be submitted by mail, electronically, or in person. Please... applicability of this action to a particular entity, consult the technical person listed under FOR FURTHER INFORMATION CONTACT. B. How can I get additional information, including copies of this document or...

  10. Flexible Plug Repair for Shuttle Wing Leading Edge

    NASA Technical Reports Server (NTRS)

    Camarda, Charles J.; Sikora, Joseph; Smith, Russel; Rivers, H.; Scotti, Stephen J.; Fuller, Alan M.; Klacka, Robert; Reinders, Martin; Schwind, Francis; Sullivan, Brian; Lester, Dean

    2012-01-01

    In response to the Columbia Accident Investigation Board report, a plug repair kit has been developed to enable astronauts to repair the space shuttle's wing leading edge (WLE) during orbit. The plug repair kit consists of several 17.78- cm-diameter carbon/silicon carbide (C/SiC) cover plates of various curvatures that can be attached to the refractory carbon-carbon WLE panels using a TZM refractory metal attach mechanism. The attach mechanism is inserted through the damage in the WLE panel and, as it is tightened, the cover plate flexes to conform to the curvature of the WLE panel within 0.050 mm. An astronaut installs the repair during an extravehicular activity (EVA). After installing the plug repair, edge gaps are checked and the perimeter of the repair is sealed using a proprietary material, developed to fill cracks and small holes in the WLE.

  11. Renovate Right: Important Lead Hazard Information for Families, Child Care Providers and Schools

    ERIC Educational Resources Information Center

    US Environmental Protection Agency, 2008

    2008-01-01

    Lead can affect children's brains and developing nervous systems, causing reduced IQ, learning disabilities, and behavioral problems. Lead is also harmful to adults. Lead in dust is the most common way people are exposed to lead. People can also get lead in their bodies from lead in soil or paint chips. Lead dust is often invisible. Lead-based…

  12. 5. RAILROAD TRRACKS LEADING TO PAINT & REPAIR SHOP; PASSENGER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. RAILROAD TRRACKS LEADING TO PAINT & REPAIR SHOP; PASSENGER CAR SHOP TO THE LEFT - Baltimore & Ohio Railroad, Mount Clare Passenger Car Shop, Southwest corner of Pratt & Poppleton Streets, Baltimore, Independent City, MD

  13. ESTE Project Brief: Environmental and Sustainable Technology Evaluations (ESTE): Verification of Qualitative Spot Test Kits for Lead in Paint

    EPA Science Inventory

    On April 22, 2008, EPA issued the final Lead; Renovation, Repair, and Painting (RRP) Program Rule. The rule addresses lead-based paint hazards created by renovation, repair, and painting activities that disturb lead-based paint in target housing and child-occupied facilities. Und...

  14. Interior Renovation.

    ERIC Educational Resources Information Center

    American School & University, 2002

    2002-01-01

    Describes notable interior renovations of educational facilities, including the educational context and design goals. Includes information on architects, suppliers, and cost, as well as photographs. (EV)

  15. 78 FR 27906 - Lead; Renovation, Repair, and Painting Program for Public and Commercial Buildings; Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-13

    ... contractors, drywall and insulation contractors, painting and wall covering contractors, finish carpentry... contractors; finish carpentry contractors; drywall and insulation contractors; siding contractors; tile...

  16. 77 FR 76996 - Lead; Renovation, Repair, and Painting Program for Public and Commercial Buildings; Request for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-31

    ..., drywall and insulation contractors, painting and wall covering contractors, finish carpentry contractors...; finish carpentry contractors; drywall and insulation contractors; siding contractors; tile and...

  17. 76 FR 47917 - Lead; Clearance and Clearance Testing Requirements for the Renovation, Repair, and Painting Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-05

    ... changes to the training program accreditation application process, standards for e-learning in accredited... accreditation application process, standards for e-learning in accredited training programs, minimum enforcement... accreditation application process, standards for e-learning in accredited training programs, minimum...

  18. FY2016 Enforcement Actions for the Lead Renovation, Repair and Painting Rule (RRP)

    EPA Pesticide Factsheets

    The Toxic Substances Control Act (TSCA) New and Existing Chemicals (NEC) Program is exclusively a federal program that provides for review of the risk of chemicals prior to their manufacture and importation to prevent unreasonable risk to human health

  19. Tricuspid-valve repair for pacemaker leads endocarditis.

    PubMed

    Iezzi, Federica; Cini, Roberto; Sordini, Paolo

    2010-12-20

    In non-addicted patients, several states, such as permanent pacemakers, can provide the predisposing factors for tricuspid-valve endocarditis. In this report, we present a case of a 66-year-old man with pacemaker lead infection and tricuspid-native-valve endocarditis, related to Staphylococcus hominis, very rare cause of infective endocarditis that carries a high-mortality risk. Surgery was indicated for the patient due to persistent enlarging vegetation on the tricuspid valve, severe tricuspid regurgitation, septic pulmonary emboli and finally uncompensated respiratory and heart failure. Many ingenious methods have been devised to repair the tricuspid valve in patients with infective endocarditis. Valve replacement, however, is hazardous due to the possibility of prosthetic infection, and we choose to repair the native valve. The patient has now been weel for 3 years.

  20. Lead

    MedlinePlus

    ... Worker, or other abatement discipline Lead in drinking water Lead air pollution Test your child Check and maintain your home Find a Lead-Safe Certified firm Before you renovate Before you buy or rent a home built before 1978 Test your home's drinking water Test for lead in paint, dust or soil ...

  1. Lead poisoning among household members exposed to lead-acid battery repair shops in Kingston, Jamaica.

    PubMed

    Matte, T D; Figueroa, J P; Ostrowski, S; Burr, G; Jackson-Hunt, L; Keenlyside, R A; Baker, E L

    1989-12-01

    To investigate the risk of lead poisoning among household members exposed to 'backyard' battery repair shops (BBRS) in Kingston, Jamaica, environmental and blood lead (PbB) were measured at 24 households (112 individuals) with a BBRS worker or located at a BBRS premises and at 18 neighbourhood control households (74 individuals). Elevated PbB (greater than or equal to 25 micrograms per decilitre [micrograms/dl]) was common among subjects of all ages living at BBRS premises, especially among children less than age 12, 43% of whom had PbB greater than 70 micrograms/dl. Potentially hazardous soil and house dust lead levels were also common at BBRS premises, where 84% of yards had soil lead levels above 500 parts per million (geometric mean 3388 parts per million [ppm] at BBRS premises households with a BBRS worker). Geometric mean blood and environmental lead levels were significantly lower at control households, where less than 10% of subjects in all age groups had elevated PbB (maximum 33 micrograms/dl). Sharing a premises with a BBRS was a stronger determinant of household blood lead and environmental contamination than was the presence of a BBRS worker in a household. Blood lead levels were associated with soil and house dust lead levels in all age groups. We conclude that small battery repair shops, which have also been described in other developing countries, create a high lead poisoning risk for nearby residents.

  2. Mismatch repair balances leading and lagging strand DNA replication fidelity.

    PubMed

    Lujan, Scott A; Williams, Jessica S; Pursell, Zachary F; Abdulovic-Cui, Amy A; Clark, Alan B; Nick McElhinny, Stephanie A; Kunkel, Thomas A

    2012-01-01

    The two DNA strands of the nuclear genome are replicated asymmetrically using three DNA polymerases, α, δ, and ε. Current evidence suggests that DNA polymerase ε (Pol ε) is the primary leading strand replicase, whereas Pols α and δ primarily perform lagging strand replication. The fact that these polymerases differ in fidelity and error specificity is interesting in light of the fact that the stability of the nuclear genome depends in part on the ability of mismatch repair (MMR) to correct different mismatches generated in different contexts during replication. Here we provide the first comparison, to our knowledge, of the efficiency of MMR of leading and lagging strand replication errors. We first use the strand-biased ribonucleotide incorporation propensity of a Pol ε mutator variant to confirm that Pol ε is the primary leading strand replicase in Saccharomyces cerevisiae. We then use polymerase-specific error signatures to show that MMR efficiency in vivo strongly depends on the polymerase, the mismatch composition, and the location of the mismatch. An extreme case of variation by location is a T-T mismatch that is refractory to MMR. This mismatch is flanked by an AT-rich triplet repeat sequence that, when interrupted, restores MMR to > 95% efficiency. Thus this natural DNA sequence suppresses MMR, placing a nearby base pair at high risk of mutation due to leading strand replication infidelity. We find that, overall, MMR most efficiently corrects the most potentially deleterious errors (indels) and then the most common substitution mismatches. In combination with earlier studies, the results suggest that significant differences exist in the generation and repair of Pol α, δ, and ε replication errors, but in a generally complementary manner that results in high-fidelity replication of both DNA strands of the yeast nuclear genome.

  3. Lead exposure in radiator repair workers: a survey of Washington State radiator repair shops and review of occupational lead exposure registry data.

    PubMed

    Whittaker, Stephen G

    2003-07-01

    Radiator repair workers in Washington State have the greatest number of very elevated (> or =60 microg/dL) blood lead levels of any other worker population. The goals of this study were to determine the number of radiator repair workers potentially exposed to lead; estimate the extent of blood lead data underreporting to the Occupational Lead Exposure Registry; describe current safety and health practices in radiator repair shops; and determine appropriate intervention strategies to reduce exposure and increase employer and worker awareness. Lead exposure in Washington State's radiator repair workers was assessed by reviewing Registry data and conducting a statewide survey of radiator repair businesses. This study revealed that a total of 226 workers in Washington State (including owner-operators and all employees) conduct repair activities that could potentially result in excessive exposures to lead. Approximately 26% of radiator repair workers with elevated blood lead levels (> or =25 microg/dL) were determined to report to Washington State's Registry. This study also revealed a lack of awareness of lead's health effects, appropriate industrial hygiene controls, and the requirements of the Lead Standard. Survey respondents requested information on a variety of workplace health and safety issues and waste management; 80% requested a confidential, free-of-charge consultation. Combining data derived from an occupational health surveillance system and a statewide mail survey proved effective at characterizing lead exposures and directing public health intervention in Washington State.

  4. Ventricular perforation by pacemaker lead repaired with two hemostatic devices

    PubMed Central

    Prestipino, Filippo; Nenna, Antonio; Casacalenda, Adele; Chello, Massimo

    2014-01-01

    INTRODUCTION Cardiac perforation is a rare, but potentially serious, complication of pacemaker implantation that may develop days or weeks after implantation. PRESENTATION OF CASE In the current case, 92-year-old man underwent permanent pacemaker implantation, but he presented 3 weeks later with severe symptoms. Computed tomography showed protrusion of the tip of the ventricular electrode through the right ventricle and into the chest wall. During an urgent surgical intervention, the lead was disconnected and extracted. A sealing hemostatic device and an hemostatic patch were applied to repair the ventricle; the procedure was uneventfull. DISCUSSION This case demonstrates how the correct diagnosis of ventricular perforation is crucial, and should be followed immediately by surgical planning. CONCLUSION The hemostatic patch is a valuable alternative to sutures in patients with thin and fragile ventricular wall, unable to undergo stitching. PMID:25460433

  5. Report: Implementation Plan With Cost Sharing Methodology Needed for Region 8 Senior Environmental Employee Work on Lead Risk Reduction

    EPA Pesticide Factsheets

    Report #13-P-0430, September 24, 2013. The two Region 8 program offices that jointly implement the Lead Renovation, Repair and Painting Program do not have methodology or agreement for sharing SEE funding, which has led to confusion.

  6. Shop Talk about Renovations.

    ERIC Educational Resources Information Center

    Fickes, Michael

    1999-01-01

    Discusses key issues in the success of campus renovation projects as viewed by a project manager and an architect. Their observations are presented on economic aspects of renovation, cost control, and project management. (GR)

  7. Lead exposure among automobile radiator repair workers and their children in New York City.

    PubMed

    Nunez, C M; Klitzman, S; Goodman, A

    1993-05-01

    Despite a comprehensive Occupational Safety and Health Administration lead standard, exposure to lead continues in many industries. This paper describes a blood lead screening and education program for automobile radiator repair workers and their families in New York City. Results showed that 67% of automobile radiator repair workers (n = 62) in 89% of the shops tested (n = 24) had blood lead levels in excess of 25 micrograms/dl. The vast majority of workers had never been tested previously, and none had received health and safety training regarding occupational lead exposure. Although none of the workers' children's blood lead levels were in excess of then-current guidelines, several had levels which may be associated with subclinical toxicity and in excess of the revised Centers for Disease Control guidelines of 10 micrograms/dl. This project demonstrates that lead exposure in the automotive radiator repair industry continues to be widespread and that local health departments can assist in hazard identification and remediation.

  8. 75 FR 24802 - Lead; Amendment to the Opt-Out and Recordkeeping Provisions in the Renovation, Repair, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-06

    ...,258 million annualized (7% discount rate). Due to avoided IQ loss in children under age 6 and... to this rule or benefits due to avoided health effects other than IQ loss and cardiovascular effects... attributable to avoided losses in expected earnings due to IQ drop in children under 6, and 90% to...

  9. Repair of Composites: Design Choices Leading to Lower Life-Cycle Cost

    NASA Astrophysics Data System (ADS)

    Kassapoglou, Christos; Rangelov, Konstantin; Rangelov, Svilen

    2016-11-01

    The fabrication cost of composite aircraft structures is revisited and the effect of part size on cost is examined with emphasis on design decisions which affect the ease of (bonded) repair and the total cost of the part and subsequent repairs. The case of moderately loaded stiffened fuselage or wing panels under compression is analysed in detail and the fabrication cost of the panel made as a single piece or as an assembly of smaller identical components or modules is determined. The cost of special purpose repairs for two different damage sizes is compared to removing and replacing damaged modules. Hand layup and automated processing are compared. It is found that for certain repair sizes removing and replacing modules leads to lower overall cost as compared to applying a special purpose repair.

  10. TQAP for Verification of Qualitative Lead Test Kits

    EPA Science Inventory

    There are lead-based paint test kits available to help home owners and contractors identify lead-based paint hazards before any Renovation, Repair, and Painting (RRP) activities take place so that proper health and safety meaures can be enacted. However, many of these test kits ...

  11. Pacific Southwest Lead-Based Paint Tips & Complaints

    EPA Pesticide Factsheets

    Information about submitting a complaint about improper removal or storage of lead-based paint in renovations or repairs, as well as disclosure of lead-based paint in real estate transactions in AZ, CA, NV, HI, and Pacific Island Territories.

  12. Summit Renovations, Inc. Information Sheet

    EPA Pesticide Factsheets

    Summit Renovations, Inc. (the Company) is located in Centennial, Colorado. The settlement involves renovation activities conducted at a property constructed prior to 1978, located in Denver, Colorado.

  13. Facility Focus: Historic Renovations.

    ERIC Educational Resources Information Center

    College Planning & Management, 2002

    2002-01-01

    Describes the renovation of historic buildings at Rice University (conversion of the Chemistry Building into space for the biophysics and bioengineering departments) and at Princeton University (renovation of the Dial Lodge eating club into a building for the Bendheim Center for Finance). Includes photographs. (EV)

  14. A leading edge heating array and a flat surface heating array - operation, maintenance and repair manual

    NASA Technical Reports Server (NTRS)

    1975-01-01

    A general description of the leading edge/flat surface heating array is presented along with its components, assembly instructions, installation instructions, operation procedures, maintenance instructions, repair procedures, schematics, spare parts lists, engineering drawings of the array, and functional acceptance test log sheets. The proper replacement of components, correct torque values, step-by-step maintenance instructions, and pretest checkouts are described.

  15. Analysis and testing of the DIII-D ohmic heating coil lead repair clamp

    SciTech Connect

    Reis, E.E.; Anderson, P.M.; Chin, E.; Robinson, J.I.

    1997-11-01

    DIII-D has been operating for the last year with limited volt-second capabilities due to structural failure of a conductor lead to one of the ohmic heating (OH) solenoids. The conductor failure was due to poor epoxy impregnation of the overwrap of the lead pack, resulting in copper fatigue and a water leak. A number of structural analyses were performed to assist in determining the failure scenario and to evaluate various repair options. A fatigue stress analysis of the leads with a failed epoxy overwrap indicated crack initiation after 1,000 cycles at the maximum operating conditions. The failure occurred in a very inaccessible area which restricted design repair options to concepts which could be implemented remotely. Several design options were considered for repairing the lead so that it can sustain the loads for 7.5 Vs conditions at full toroidal field. A clamp, along with preloaded banding straps and shim bags, provides a system that guarantees that the stress at the crack location is always compressive and prevents further crack growth in the conductor. Due to the limited space available for the repair, it was necessary to design the clamp system to operate at the material yield stress. The primary components of the clamp system were verified by load tests prior to installation. The main body of the clamp contains a load cell and potentiometer for monitoring the load-deflection characteristics of the clamp and conductors during plasma operation. Strain gages provides redundant instrumentation. If required, the preload on the conductors can be increased remotely by a special wrench attached to the clamp assembly.

  16. Tricuspid valve repair for torrential tricuspid regurgitation after permanent pacemaker lead extraction.

    PubMed

    Mehrotra, Deepak; Kejriwal, Nand K

    2011-01-01

    Tricuspid regurgitation secondary to percutaneous lead extraction is uncommon, and it rarely requires surgical intervention. Most tricuspid regurgitation occurs during the implantation of tined leads, which can be entrapped in the tricuspid valve apparatus and may require immediate withdrawal. Severe tricuspid regurgitation as a sequela of extracting chronically implanted leads has rarely been reported. Herein, we report a case of torrential tricuspid regurgitation in a 67-year-old woman after the extraction of a permanent pacemaker lead. The regurgitation was confirmed on transesophageal echocardiography during lead extraction, and the tricuspid valve was successfully repaired with suture bicuspidization of the valve and the support of ring annuloplasty. A short review of the relevant literature follows the case report.

  17. Flexible Metallic Overwrap Concept Developed for On-Orbit Repair of Space Shuttle Orbiter Leading Edges

    NASA Technical Reports Server (NTRS)

    Ritzert, Frank J.; Nesbitt, James A.

    2005-01-01

    The Columbia accident has focused attention on the critical need for on-orbit repair concepts for leading edges in the event that damage is incurred during space shuttle orbiter flight. Damage that is considered as potentially catastrophic for orbiter leading edges ranges from simple cracks to holes as large as 16 in. in diameter. NASA is particularly interested in examining potential solutions for areas of larger damage since such a problem was identified as the cause for the Columbia disaster. One possible idea for the on-orbit repair of the reinforced carbon/carbon (RCC) leading edges is an overwrap concept that would use a metallic sheet flexible enough to conform to the contours of the orbiter and robust enough to protect any problem area from catastrophic failure during reentry. The simplified view of the application of a refractory metal sheet over a mockup of shuttle orbiter panel 9, which experiences the highest temperatures on the shuttle during reentry is shown. The metallic overwrap concept is attractive because of its versatility as well as the ease with which it can be included in an onboard repair kit. Reentry of the orbiter into Earth's atmosphere imposes extreme requirements on repair materials. Temperatures can exceed 1650 C for up to 15 min in the presence of an extremely oxidizing plasma environment. Several other factors are critical, including catalysity, emissivity, and vibrational and aerodynamic loads. Materials chosen for this application will need to be evaluated with respect to high-temperature capability, resistance to oxidation, strength, coefficient of thermal expansion, and thermal conductivity. The temperature profile across panel 9 during reentry as well as a schematic of the overwrap concept itself is shown.

  18. In situ repair of vagus nerve stimulator lead damage: technical note.

    PubMed

    Ralston, Ashley; Ogden, Patti; Kohrman, Michael H; Frim, David M

    2016-12-01

    Vagus nerve stimulators (VNSs) are currently an accepted treatment for intractable epilepsy not amenable to ablative surgery. Battery death and lead damage are the main reasons for reoperation in patients with VNSs. In general, any damage to the lead requires revision surgery to remove the helical electrodes from the vagus nerve and replace the electrode array and wire. The electrodes are typically scarred and difficult to remove from the vagus nerve without injury. The authors describe 6 patients with VNSs who presented with low lead impedance on diagnostic testing, leading to the intraoperative finding of lead insulation disruption, or who were found incidentally at the time of implantable pulse generator battery replacement to have a tear in the outer insulation of the electrode wire. Instead of replacement, the wire insulation was repaired and reinforced in situ, leading to normal impedance testing. All 6 devices remained functional over a follow-up period of up to 87 months, with 2 of the 6 patients having a relatively shorter follow-up of only 12 months. This technique, applicable in a subset of patients with VNSs requiring lead exploration, obviates the need for lead replacement with its attendant risks.

  19. Physics Lab Renovation 101

    ERIC Educational Resources Information Center

    Ramlo, Susan

    2007-01-01

    If you have an older physics laboratory and/or classroom space, you've probably dreamed about how to make the space more adaptable to today's technology and the best teaching and learning practices. Yet, few articles exist in the literature to give us direction for this type of renovation, thus creating the potential of misspending funds that are…

  20. Ready to Renovate

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2008-01-01

    Schools and universities should have a thorough plan that sets priorities for the most pressing facility renovations. With remedial programs, enrichment offerings, recreational activities and extended-year schedules, many school facilities are no longer dormant in the summer months. The increased year-round use of education facilities benefits…

  1. Enhanced cartilage repair in 'healer' mice-New leads in the search for better clinical options for cartilage repair.

    PubMed

    Fitzgerald, Jamie

    2017-02-01

    Adult articular cartilage has a poor capacity to undergo intrinsic repair. Current strategies for the repair of large cartilage defects are generally unsatisfactory because the restored cartilage does not have the same resistance to biomechanical loading as authentic articular cartilage and degrades over time. Recently, an exciting new research direction, focused on intrinsic cartilage regeneration rather than fibrous repair by external means, has emerged. This review explores the new findings in this rapidly moving field as they relate to the clinical goal of restoration of structurally robust, stable and non-fibrous articular cartilage following injury.

  2. Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops

    SciTech Connect

    Sweeney, Lynn C.

    2013-04-01

    An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Work performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M™ 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit

  3. Metallic Concepts for Repair of Reinforced Carbon-Carbon Space Shuttle Leading Edges

    NASA Technical Reports Server (NTRS)

    Ritzert, Frank; Nesbitt, James

    2007-01-01

    The Columbia accident has focused attention on the critical need for on-orbit repair concepts for wing leading edges in the event that potentially catastrophic damage is incurred during Space Shuttle Orbiter flight. The leading edge of the space shuttle wings consists of a series of eleven panels on each side of the orbiter. These panels are fabricated from reinforced carbon-carbon (RCC) which is a light weight composite with attractive strength at very high temperatures. The damage that was responsible for the loss of the Colombia space shuttle was deemed due to formation of a large hole in one these RCC leading edge panels produced by the impact of a large piece of foam. However, even small cracks in the RCC are considered as potentially catastrophic because of the high temperature re-entry environment. After the Columbia accident, NASA has explored various means to perform on-orbit repairs in the event that damage is sustained in future shuttle flights. Although large areas of damage, such as that which doomed Columbia, are not anticipated to re-occur due to various improvements to the shuttle, especially the foam attachment, NASA has also explored various options for both small and large area repair. This paper reports one large area repair concept referred to as the "metallic over-wrap." Environmental conditions during re-entry of the orbiter impose extreme requirements on the RCC leading edges as well as on any repair concepts. These requirements include temperatures up to 3000 F (1650 C) for up to 15 minutes in the presence of an extremely oxidizing plasma environment. Figure 1 shows the temperature profile across one panel (#9) which is subject to the highest temperatures during re-entry. Although the RCC possesses adequate mechanical strength at these temperatures, it lacks oxidation resistance. Oxidation protection is afforded by converting the outer layers of the RCC to SiC by chemical vapor deposition (CVD). At high temperatures in an oxidizing

  4. EPA and the City of Memphis and Shelby County Partner to Address Lead in Homes

    EPA Pesticide Factsheets

    (11/08/2015 - ATLANTA ) -- The U.S. Environmental Protection Agency (EPA) is partnering with the City of Memphis and Shelby County government to unveil a pilot program to address the renovation, repair, and painting of homes painted with lead-based p

  5. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... renovator. (3) Individuals who have successfully completed an accredited lead-based paint inspector or risk... acceptable test kit to determine whether components to be affected by the renovation contain lead-based...

  6. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... renovator. (3) Individuals who have successfully completed an accredited lead-based paint inspector or risk... whether components to be affected by the renovation contain lead-based paint. (7) Must have with them...

  7. SNMIB/Apollo protects leading-strand telomeres against NHEJ-mediated repair

    PubMed Central

    Lam, Yung C; Akhter, Shamima; Gu, Peili; Ye, Jing; Poulet, Anaïs; Giraud-Panis, Marie-Josèphe; Bailey, Susan M; Gilson, Eric; Legerski, Randy J; Chang, Sandy

    2010-01-01

    Progressive telomere attrition or deficiency of the protective shelterin complex elicits a DNA damage response as a result of a cell's inability to distinguish dysfunctional telomeric ends from DNA double-strand breaks. SNMIB/Apollo is a shelterin-associated protein and a member of the SMN1/PSO2 nuclease family that localizes to telomeres through its interaction with TRF2. Here, we generated SNMIB/Apollo knockout mouse embryo fibroblasts (MEFs) to probe the function of SNMIB/Apollo at mammalian telomeres. SNMIB/Apollo null MEFs exhibit an increased incidence of G2 chromatid-type fusions involving telomeres created by leading-strand DNA synthesis, reflective of a failure to protect these telomeres after DNA replication. Mutations within SNMIB/Apollo's conserved nuclease domain failed to suppress this phenotype, suggesting that its nuclease activity is required to protect leading-strand telomeres. SNMIB/Apollo−/−ATM−/− MEFs display robust telomere fusions when Trf2 is depleted, indicating that ATM is dispensable for repair of uncapped telomeres in this setting. Our data implicate the 5′–3′ exonuclease function of SNM1B/Apollo in the generation of 3′ single-stranded overhangs at newly replicated leading-strand telomeres to protect them from engaging the non-homologous end-joining pathway. PMID:20551906

  8. CEBAF Control Room Renovation

    SciTech Connect

    Michael Spata; Thomas Oren

    2005-05-01

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facility's 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week maintenance period with no interruption to beam operations. We present the results of this effort.

  9. CEBAF Control Room Renovation

    SciTech Connect

    Michael Spata; Thomas Oren

    2005-05-01

    The Machine Control Center at Jefferson Lab's Continuous Electron Beam Accelerator Facility was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week period with no interruption to beam operations. We present the results of this effort.

  10. CEBAF Control Room Renovation

    SciTech Connect

    Michael Spata; Anthony Cuffe; Thomas Oren

    2005-03-22

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on work-flow processes and ergonomic attributes. The renovation was performed in two phases during the summer of 2004, with one phase occurring during machine operations and the latter, more extensive phase, occurring during our semi-annual shutdown period. The new facility takes advantage of advances in display technology, analog and video signal management, server technology, ergonomic workspace design, lighting engineering, acoustic ceilings and raised flooring solutions to provide a marked improvement in the overall environment of machine operations.

  11. Twenty-six tons of lead oxide used per year in wooden boat building and repairing in southern Thailand.

    PubMed

    Chongsuvivatwong, Virasakdi; Kaeosanit, Suwapit; Untimanon, Orrapan

    2011-06-01

    In southern Thailand, the wooden boat building and repair industry uses powdered lead oxide (Pb(3)O(4,) or red lead) in the caulking process. This had been shown to be a significant source of contamination in the workplace and the communities. This cross-sectional study was conducted to estimate the amount of lead oxide used in the region and to document the management of hazardous waste product in this industry. All boatyards in southern Thailand registered to the Ministry of Industry were visited with walk-through observation. After consent, questionnaire-based interviews were conducted among workers and boatyard owners who rented out the space for building and repairing the boats. Of the 63 active boatyards identified, approximately 26 tons of lead oxide was used to repair approximately 8,000 boats each year. Due to the casual employment system in this industry, no facility for the protection of workers and the environment from lead contamination exists. The findings indicate the need for further studies on the extent of contamination in the broader area. Intervention programmes are also urgently needed to reduce the release of this hazardous waste into the community.

  12. Endovascular aneurysm repair delivery redesign leads to quality improvement and cost reduction

    PubMed Central

    Warner, Courtney J.; Horvath, Alexander J.; Powell, Richard J.; Columbo, Jesse A.; Walsh, Teri R.; Goodney, Philip P.; Walsh, Daniel B.; Stone, David H.

    2017-01-01

    Objective Endovascular aneurysm repair (EVAR) is now a mainstay of therapy for abdominal aortic aneurysm, although it remains associated with significant expense. We performed a comprehensive analysis of EVAR delivery at an academic medical center to identify targets for quality improvement and cost reduction in light of impending health care reform. Methods All infrarenal EVARs performed from April 2011 to March 2012 were identified (N = 127). Procedures were included if they met standard commercial instructions for use guidelines, used a single manufacturer, and were billed to Medicare diagnosis-related group 238 (n = 49). By use of DMAIC (define, measure, analyze, improve, and control) quality improvement methodology (define, measure, analyze, improve, control), targets for EVAR quality improvement were identified and high-yield changes were implemented. Procedure technical costs were calculated before and after process redesign. Results Perioperative services and clinic visits were identified as targets for quality improvement efforts and cost reduction. Mean technical costs before the intervention were $31,672, with endograft implants accounting for 52%. Pricing redesign in collaboration with hospital purchasing reduced mean EVAR technical costs to $28,607, a 10% reduction in overall cost, with endograft implants now accounting for 46%. Perioperative implementation of instrument tray redesign reduced instrument use by 32% (184 vs 132 instruments), saving $50,000 annually. Unnecessary clinic visits were reduced by 39% (1.6 vs 1.1 clinic visits per patient) through implementation of a preclinic imaging protocol. There was no difference in mean length of stay after the intervention. Conclusions Comprehensive EVAR delivery redesign leads to cost reduction and waste elimination while preserving quality. Future efforts to achieve more competitive and transparent device pricing will make EVAR more cost neutral and enhance its financial sustainability for health care

  13. 40 CFR 745.92 - Fees for the accreditation of renovation and dust sampling technician training and the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Residential Property... Certification Re-certification (every 5 years see 40 CFR 745.89(b)) Firm $300 $300 Combined Renovation and Lead-based Paint Activities Firm Application $550 $550 Combined Renovation and Lead-based Paint...

  14. 40 CFR 745.92 - Fees for the accreditation of renovation and dust sampling technician training and the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Residential Property... Certification Re-certification (every 5 years see 40 CFR 745.89(b)) Firm $300 $300 Combined Renovation and Lead-based Paint Activities Firm Application $550 $550 Combined Renovation and Lead-based Paint...

  15. 40 CFR 745.92 - Fees for the accreditation of renovation and dust sampling technician training and the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Residential Property... Certification Re-certification (every 5 years see 40 CFR 745.89(b)) Firm $300 $300 Combined Renovation and Lead-based Paint Activities Firm Application $550 $550 Combined Renovation and Lead-based Paint...

  16. 40 CFR 745.92 - Fees for the accreditation of renovation and dust sampling technician training and the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Residential Property... Certification Re-certification (every 5 years see 40 CFR 745.89(b)) Firm $300 $300 Combined Renovation and Lead-based Paint Activities Firm Application $550 $550 Combined Renovation and Lead-based Paint...

  17. 40 CFR 745.92 - Fees for the accreditation of renovation and dust sampling technician training and the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Residential Property... Certification Re-certification (every 5 years see 40 CFR 745.89(b)) Firm $300 $300 Combined Renovation and Lead-based Paint Activities Firm Application $550 $550 Combined Renovation and Lead-based Paint...

  18. Frequency of Use Leads to Automaticity of Production: Evidence from Repair in Conversation

    ERIC Educational Resources Information Center

    Kapatsinski, Vsevolod

    2010-01-01

    In spontaneous speech, speakers sometimes replace a word they have just produced or started producing by another word. The present study reports that in these replacement repairs, low-frequency replaced words are more likely to be interrupted prior to completion than high-frequency words, providing support to the hypothesis that the production of…

  19. Addressing Lead-Based Paint Hazards During Renovation, Remodeling, and Rehabilitation in Federally Owned and Assisted Housing. Instructor Manual for Use in HUD-Sponsored Lead-Safe Work Practices Training.

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Washington, DC. Office of Pollution Prevention and Toxics.

    This document is the instructor's manual for a U.S. Department of Housing and Urban Development (HUD) training course that reflects the requirements of HUD's Lead Safe Housing Rule and is designed to provide training contractors with information regarding containment, minimization, and cleanup of lead hazards during activities that disturb…

  20. Abdominal compartment syndrome after endovascular repair for ruptured abdominal aortic aneurysm leads to acute intestinal necrosis

    PubMed Central

    Chen, Xiyang; Zhao, Jichun; Huang, Bin; Yuan, Ding; Yang, Yi; Ma, Yukui

    2016-01-01

    Abstract Introduction: Abdominal compartment syndrome (ACS) after endovascular repair (EVAR) of rupture abdominal aortic aneurysm (rAAA) is a rare emergency situation, which has a high mortality. However, the progression of ACS is rapid and the diagnosis is usually been delayed, which increase the difficulties in treatment and affect the prognosis. We describe a case of a sever complication (acute intestinal necrosis) resulting from ACS after endovascular repair of rAAA. Clinical Finding: An elderly man, 81 years old, complained a sudden lower abdominal and back pain without any predisposing cause. He had a history of hypertension for 20 years without any regular anti-hypertensive therapy. Physical Examination revealed that the blood pressure was 89/54 mmHg, pulse was 120/min, oxygen saturation was 91%. The abdominal ultrasound and the CTA (computed tomography angiography) scan revealed a rAAA. Emergency EVAR under general anesthesia was performed for this patient. Diagnosis: Fourteen hours after endovascular repair, sudden decreased of blood pressure (70/50 mmHg) and oxygen saturation (70%) was observed. ACS or bleeding of retroperitoneal space was diagnosed. Interventions: Abdominal laparotomy was immediately performed. ACS was verified and a severe complication (acute intestinal necrosis) was observed, intestinal resection was performed for this patient. Outcomes: Unfortunately, this patient died after operation because of multi-organ failure in a very short period, which is very rare regarding to this condition. Surgical pathology, diagnosis and management were discussed. Conclusion: ACS was occurred with a severe complication (acute intestinal necrosis) in a very short period, which is very rare regarding to this condition after EVAR, it reminds us the severe result of ACS and more methods to prevent it happened after surgical management. PMID:27893667

  1. How To Renovate for Sustainability.

    ERIC Educational Resources Information Center

    Sturgeon, Julie

    2003-01-01

    Suggests ways to renovate buildings with sustainability in mind, with specific tips in the areas of: (1) lights; energy management; (3) walls and roofs; (4) water; and (5) aesthetics. No one thing will make a building sustainable; it is the aggregate that makes it effective. (SLD)

  2. Renovating To Meet ADA Standards.

    ERIC Educational Resources Information Center

    Huber, Judy; Jones, Garry

    2003-01-01

    Using the examples of Owen D. Young School in Van Hornesville, New York, and the Tonawanda City school district in Buffalo, New York, describes how school planners should take the accessibility standards mandated by the Americans with Disabilities Act (ADA) into account when renovating. (EV)

  3. How to Survive Library Renovation.

    ERIC Educational Resources Information Center

    Lambert, Linda Stern

    1992-01-01

    Describes the renovation of the library at Walnut Hill School for the Arts (Natick, Massachusetts). Topics discussed include initial planning; packing up the collection for storage; dealing with construction delays while maintaining some library service; moving into the new space; student and teacher reactions; and the effects on library use. (LRW)

  4. Environmental and childhood lead contamination in the proximity of boat-repair yards in southern Thailand--I: pattern and factors related to soil and household dust lead levels.

    PubMed

    Maharachpong, Nipa; Geater, Alan; Chongsuvivatwong, Virasakdi

    2006-07-01

    High blood lead levels have recently been documented in schoolchildren living in communities adjacent to boat-repair yards in southern Thailand. In this study, the spatial pattern of lead contamination of soil and household dust in an area surrounding several boat-repair yards is described, and household factors associated with elevated dust lead are identified. A cross-sectional spatial study was conducted in a coastal residential area within a distance of 2 km from three major boat-repair yards situated on the east coast of peninsular Thailand. Household dust specimens were collected from an undisturbed position in the residences of children, aged 4-14 years, sampled randomly from all children living in the study area. Soil specimens were obtained from the interstices of a square grid, 70 x 70 m2, superimposed on the area. Geographic coordinates of residence and soil sampling positions were recorded and semivariograms and kriging used to contour the spatial distribution of lead in dust and soil. Environmental lead levels were also modeled in terms of direction and minimum distance from a boat-repair yard and, for household dust lead content, in terms of household variables, including occupation of household members in boat-repair work, type of house construction, and general cleanliness. Household dust and soil lead content ranged from 10 to 3025 mg/kg and from 1 to 7700 mg/kg, respectively. The distribution of soil lead peaked at the location of the boat-repair yards, but outside the yards the distribution was generally below 400 mg/kg and irregular. About 24% of household dust lead specimens were equal to or above 400 mg/kg, but showed significant decrease with increasing distance from the boat-repair yards, at rates of between 7% and 14% per 100 m. In houses where a family member was a worker in one of the major boatyards and in houses where occasional repair of small boats was undertaken, household dust lead levels were significantly elevated, by 65% (95% CI

  5. Bioaccessibility of lead in airborne particulates from car battery repair work.

    PubMed

    Dartey, Emmanuel; Berlinger, Balazs; Thomassen, Yngvar; Ellingsen, Dag G; Odland, Jon Ø; Nartey, Vincent K; Yeboah, Francis A; Weinbruch, Stephan

    2014-12-01

    The bioaccessibility of Pb in air particulate matter from two car battery repair workshops in Kumasi (Ghana) was measured (64 full shift personal aerosol samples). An artificial lung lining fluid simulant (Hatch solution) was applied for leaching the bioaccessible fraction in half of the samples, the other half was leached with synthetic gastric juice. At both locations, the Pb solubility (median) in gastric juice (89% and 92%) is substantially higher than in Hatch solution (4.9% and 5.6%). The high solubility of Pb in gastric juice may be related to the presence of Pb oxides. The low bioaccessibility of Pb in Hatch solution is in good agreement with previous work on mine tailings, urban aerosol, car exhaust, welding fumes and indoor dust. The high bioaccessibility of Pb in the gastrointestinal tract underpins the importance of improving the personal hygienic behavior at the workplace. It is recommended that air monitoring of Pb should include the extrathoracic aerosol fraction using inhalable aerosol samplers, as particles of this size fraction are most likely transferred to the gastrointestinal tract in addition to the non-lung-soluble particles transported from the lung by mucociliary and phagocytosis clearance.

  6. Chemical form of selenium differentially influences DNA repair pathways following exposure to lead nitrate.

    PubMed

    McKelvey, Shauna M; Horgan, Karina A; Murphy, Richard A

    2015-01-01

    Lead, an environmental toxin is known to induce a broad range of physiological and biochemical dysfunctions in humans through a number of mechanisms including the deactivation of antioxidants thus leading to generation of reactive oxygen species (ROS) and subsequent DNA damage. Selenium on the other hand has been proven to play an important role in the protection of cells from free radical damage and oxidative stress, though its effects are thought to be form and dose dependent. As the liver is the primary organ required for metabolite detoxification, HepG2 cells were chosen to assess the protective effects of various selenium compounds following exposure to the genotoxic agent lead nitrate. Initially DNA damage was quantified using a comet assay, gene expression patterns associated with DNA damage and signalling were also examined using PCR arrays and the biological pathways which were most significantly affected by selenium were identified. Interestingly, the organic type selenium compounds (selenium yeast and selenomethionine) conferred protection against lead induced DNA damage in HepG2 cells; this is evident by reduction in the quantity of DNA present in the comet tail of cells cultured in their presence with lead. This trend also followed through the gene expression changes noted in DNA damage pathways analysed. These results were in contrast with those of inorganic sodium selenite which promoted lead induced DNA damage evident in both the comet assay results and the gene expression analysis. Over all this study provided valuable insights into the effects which various selenium compounds had on the DNA damage and signalling pathway indicating the potential for using organic forms of selenium such as selenium enriched yeast to protect against DNA damaging agents.

  7. Enhanced cartilage repair in ‘healer’ mice—New leads in the search for better clinical options for cartilage repair

    PubMed Central

    Fitzgerald, Jamie

    2016-01-01

    Adult articular cartilage has a poor capacity to undergo intrinsic repair. Current strategies for the repair of large cartilage defects are generally unsatisfactory because the restored cartilage does not have the same resistance to biomechanical loading as authentic articular cartilage and degrades over time. Recently, an exciting new research direction, focused on intrinsic cartilage regeneration rather than fibrous repair by external means, has emerged. This review explores the new findings in this rapidly moving field as they relate to the clinical goal of restoration of structurally robust, stable and non-fibrous articular cartilage following injury. PMID:27130635

  8. Lead exposure in a petroleum refinery during maintenance and repair activities

    SciTech Connect

    Booher, L.E.; Zampello, F.C.

    1994-02-01

    Exposure to inorganic lead (Pb) may result in a petroleum refinery when paints that contain Pb are disturbed. Frequently performed activities that disturb paint include welding, burning, cutting, abrasive blasting, sanding, grinding, and needle gun chipping. The purpose of the study reported in this article was: to determine the Pb content of paint on metal surfaces in a petroleum refinery; to measure air Pb concentrations during abrasive blasting, torch cutting and burning, and power disk sanding/grinding on surfaces coated with Pb paint; and to evaluate the effectiveness of worker exposure controls by monitoring worker blood Pb (PbB) levels. Pb levels on representative metal surfaces were measured, and most painted surfaces were found to contain significant amounts of Pb. Personal air samples collected indicated that abrasive blasting and torch burning/cutting resulted in elevated air Pb levels, while short duration power disk sanding (less than 30 minutes duration) did not result in elevated air Pb levels as compared to the Occupational Safety and Health Administration permissible exposure limit. Despite these elevated air Pb levels, exposure controls including personal protective equipment, housekeeping, showering, work area isolation, and training effectively prevented elevated worker PbB levels. 6 refs., 4 figs., 3 tabs.

  9. Fibrin glue repair leads to enhanced axonal elongation during early peripheral nerve regeneration in an in vivo mouse model.

    PubMed

    Koulaxouzidis, Georgios; Reim, Gernot; Witzel, Christian

    2015-07-01

    Microsurgical suturing is the gold standard of nerve coaptation. Although literature on the usefulness of fibrin glue as an alternative is becoming increasingly available, it remains contradictory. Furthermore, no data exist on how both repair methods might influence the morphological aspects (arborization; branching) of early peripheral nerve regeneration. We used the sciatic nerve transplantation model in thy-1 yellow fluorescent protein mice (YFP; n = 10). Pieces of nerve (1cm) were grafted from YFP-negative mice (n = 10) into those expressing YFP. We performed microsuture coaptations on one side and used fibrin glue for repair on the contralateral side. Seven days after grafting, the regeneration distance, the percentage of regenerating and arborizing axons, the number of branches per axon, the coaptation failure rate, the gap size at the repair site and the time needed for surgical repair were all investigated. Fibrin glue repair resulted in regenerating axons travelling further into the distal nerve. It also increased the percentage of arborizing axons. No coaptation failure was detected. Gap sizes were comparable in both groups. Fibrin glue significantly reduced surgical repair time. The increase in regeneration distance, even after the short period of time, is in line with the results of others that showed faster axonal regeneration after fibrin glue repair. The increase in arborizing axons could be another explanation for better functional and electrophysiological results after fibrin glue repair. Fibrin glue nerve coaptation seems to be a promising alternative to microsuture repair.

  10. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... certified renovator. (3) Individuals who have successfully completed an accredited lead-based paint... are currently certified as lead-based paint inspectors or risk assessors may act as certified...

  11. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... certified renovator. (3) Individuals who have successfully completed an accredited lead-based paint... are currently certified as lead-based paint inspectors or risk assessors may act as certified...

  12. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... certified renovator. (3) Individuals who have successfully completed an accredited lead-based paint... are currently certified as lead-based paint inspectors or risk assessors may act as certified...

  13. Sensible Guide for Healthier School Renovations

    EPA Pesticide Factsheets

    This booklet provides school administrators, facility managers, staff and the school community with an overview of how to avoid key environmental health hazards and ways to minimize children’s exposures as they prepare for and undergo renovations.

  14. Include Passive Solar in Your Renovations.

    ERIC Educational Resources Information Center

    Bender, Gerald F.; Probasco, Jack F.

    1981-01-01

    A checklist covers potential energy saving modifications in a building scheduled for renovation, and includes suggestions for room utilization, landscaping, and building envelope, solar control, and active system modifications. (Author)

  15. Lead

    MedlinePlus

    ... ATSDR Board of Scientific Counselors Lead in the environment: Agency for Toxic Substances and Disease Registry (ATSDR) Federal partner agencies: Department of Housing and Urban Development (HUD) and U.S. Environmental Protection Agency (EPA) Data, ...

  16. Knockdown of {alpha}II spectrin in normal human cells by siRNA leads to chromosomal instability and decreased DNA interstrand cross-link repair

    SciTech Connect

    McMahon, Laura W.; Zhang Pan; Sridharan, Deepa M.; Lefferts, Joel A.; Lambert, Muriel W.

    2009-04-03

    Nonerythroid {alpha}-spectrin ({alpha}IISp) is a structural protein involved in repair of DNA interstrand cross-links and is deficient in cells from patients with Fanconi anemia (FA), which are defective in ability to repair cross-links. In order to further demonstrate the importance of the role that {alpha}IISp plays in normal human cells and in the repair defect in FA, {alpha}IISp was knocked down in normal cells using siRNA. Depletion of {alpha}IISp in normal cells by siRNA resulted in chromosomal instability and cellular hypersensitivity to DNA interstrand cross-linking agents. An increased number of chromosomal aberrations were observed and, following treatment with a DNA interstrand cross-linking agent, mitomycin C, cells showed decreased cell growth and survival and decreased formation of damage-induced {alpha}IISp and XPF nuclear foci. Thus depletion of {alpha}IISp in normal cells leads to a number of defects observed in FA cells, such as chromosome instability and a deficiency in cross-link repair.

  17. Knockdown of αII spectrin in normal human cells by siRNA leads to chromosomal instability and decreased DNA interstrand cross-link repair

    PubMed Central

    McMahon, Laura W.; Zhang, Pan; Sridharan, Deepa M.; Lefferts, Joel A.; Lambert, Muriel W.

    2009-01-01

    Nonerythroid α-spectrin (αIISp) is a structural protein involved in repair of DNA interstrand cross-links and is deficient in cells from patients with Fanconi anemia (FA), which are defective in ability to repair cross-links. In order to further demonstrate the importance of the role that αIISp plays in normal human cells and in the repair defect in FA, αIISp was knocked down in normal cells using siRNA. Depletion of αIISp in normal cells by siRNA resulted in chromosomal instability and cellular hypersensitivity to DNA interstrand cross-linking agents. An increased number of chromosomal aberrations were observed and, following treatment with a DNA interstrand cross-linking agent, mitomycin C, cells showed decreased cell growth and survival and decreased formation of damage induced αIISp and XPF nuclear foci. Thus depletion of αIISp in normal cells leads to a number of defects observed in FA cells, such as chromosome instability and a deficiency in cross-link repair. PMID:19217883

  18. Determining School District Renovation/Remodeling/Repair Needs.

    ERIC Educational Resources Information Center

    MacKenzie, Donald G.; Phillips, Paul

    1991-01-01

    Bond issue funds were earmarked for remodeling 10 schools in a Florida school district. Describes a physical plant survey instrument used to examine each district school building to determine the district needs and the method that prioritizes those needs. (MLF)

  19. DNA damage and decreased DNA repair in peripheral blood mononuclear cells in individuals exposed to arsenic and lead in a mining site.

    PubMed

    Jasso-Pineda, Yolanda; Díaz-Barriga, Fernando; Calderón, Jaqueline; Yáñez, Leticia; Carrizales, Leticia; Pérez-Maldonado, Iván N

    2012-05-01

    The aim of this study was to evaluate DNA damage and the capacity for DNA repair in children exposed to arsenic and lead. During 2006, we studied a total of 85 healthy children (aged 4-11 years) who were residents of Villa de la Paz (community A), Matehuala (community B), and Soledad de Graciano Sanchez (community C) in San Luis Potosi, Mexico. The quantification of arsenic in urine (AsU) and lead in blood (PbB) was performed by atomic absorption spectrophotometry. The alkaline comet assay was used to evaluate DNA damage and DNA repair. The highest levels of AsU and PbB in children were found in community A (44.5 μg/g creatinine for arsenic and 11.4 μg/dL for lead), followed by community B (16.8 μg/g creatinine for arsenic and 7.3 μg/dL for lead) and finally by children living in community C (12.8 μg/g creatinine for arsenic and 5.3 μg/dL for lead). When DNA damage was assessed, children living in community A had the highest DNA damage. Analysis of these same cells 1 h after a challenge with H(2)O(2) 10 μM showed a dramatic increase in DNA damage in the cells of children living in community B and community C, but not in the cells of children living in community A. Moreover, significantly higher levels of DNA damage were observed 3 h after the challenge ended (repair period) in cells from individuals living in community A. Our results show that children exposed to metals might be more susceptible to DNA alterations.

  20. Amalaco LLC, d/b/a MJM Renovation Information Sheet

    EPA Pesticide Factsheets

    Amalaco LLC, d/b/a MJM Renovation (the Company) is located in St. Louis, Missouri. The settlement involves renovation activities conducted at a property constructed prior to 1978, located in St. Louis, Missouri.

  1. Indoor air quality during renovation actions: a case study.

    PubMed

    Abdel Hameed, A A; Yasser, I H; Khoder, I M

    2004-09-01

    A temporary renovation activity releases considerably high concentrations of particulate matter, viable and non-viable, into air. These pollutants are a potential contributor to unacceptable indoor air quality (IAQ). Particulate matter and its constituents lead, sulfate, nitrate, chloride, ammonium and fungi as well as fungal spores in air were evaluated in a building during renovation action. Suspended dust was recorded at a mean value of 6.1 mg m(-3) which exceeded the Egyptian limit values for indoor air (0.15 mg m(-3)) and occupational environments (5 mg m(-3)). The highest particle frequency (23%) of aerodynamic diameter (dae) was 1.7 microm. Particulate sulfate (SO(4)(2-)), nitrate (NO(3)(-)), chloride (Cl(-)), ammonium (NH(4)(+)) and lead components of suspended dust averaged 2960, 28, 1350, 100 and 13.3 microg m(-3), respectively. Viable fungi associated with suspended dust and that in air averaged 1.11 x 10(6) colony forming unit per gram (cfu g(-1)) and 92 colony forming unit per plate per hour (cfu p(-1) h(-1)), respectively. Cladosporium(33%), Aspergillus(25.6%), Alternaria(11.2%) and Penicillium(6.6%) were the most frequent fungal genera in air, whereas Aspergillus(56.8%), Penicillium(10.3%) and Eurotium(10.3%) were the most common fungal genera associated with suspended dust. The detection of Aureobasidium, Epicoccum, Exophiala, Paecilomyces, Scopulariopsis, Ulocladium and Trichoderma is an indication of moisture-damaged building materials. Alternaria, Aureobasidium, Cladosporium, Scopulariopsis and Nigrospora have dae > 5 microm whereas Aspergillus, Penicillium and Verticillium have dae < 5 microm which are suited to penetrate deeply into lungs. Particulate matter from the working area infiltrates the occupied zones if precautionary measures are inadequate. This may cause deterioration of IAQ, discomfort and acute health problems. Renovation should be carefully designed and managed, in order to minimize degradation of the indoor and outdoor air

  2. 19 CFR 10.624 - Goods re-entered after repair or alteration in a Party.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Goods re-entered after repair or alteration in a....624 Goods re-entered after repair or alteration in a Party. (a) General. This section sets forth the..., “repairs or alterations” means restoration, addition, renovation, re-dyeing, cleaning, re-sterilizing,...

  3. The renovation of Madison's Oscar Mayer Theater

    NASA Astrophysics Data System (ADS)

    Myers, Joseph W. A.; Calamia, Paul T.

    2002-05-01

    Originally opened in 1928 as the Capitol Theatre, the Oscar Mayer Theatre in Madison, WI underwent substantial renovation in 1980 to support its current performance program. The theatre is now home to the Madison Symphony and the Madison Opera, and is used for ballet, touring shows, and popular concerts as well. As part of the ongoing Overture Project which will transform the theatre's home, the Madison Civic Center, into the Overture Center, the Oscar Mayer Theatre will be further improved to support its new role. In this paper we will discuss the reasoning behind the upcoming renovation within the context of the Overture Project, we will describe the pending architectural modifications to the theatre, and we will discuss the intended changes in acoustics. Computer modeling results will also be presented for the existing and renovated conditions.

  4. The Effect of School Building Renovation/Construction on School Culture

    ERIC Educational Resources Information Center

    Lesisko, Lee J.; Wright, Robert J.; O'Hern, Brenda

    2010-01-01

    School construction or renovation projects can have a profound affect on students, faculty and administration. The literature revealed that continuous communication is essential for a smooth process. This research identified bureaucratic issues and school climate to be leading factors of concern during construction projects. Analysis of this study…

  5. Bypass of a 5',8-cyclopurine-2'-deoxynucleoside by DNA polymerase β during DNA replication and base excision repair leads to nucleotide misinsertions and DNA strand breaks.

    PubMed

    Jiang, Zhongliang; Xu, Meng; Lai, Yanhao; Laverde, Eduardo E; Terzidis, Michael A; Masi, Annalisa; Chatgilialoglu, Chryssostomos; Liu, Yuan

    2015-09-01

    5',8-Cyclopurine-2'-deoxynucleosides including 5',8-cyclo-dA (cdA) and 5',8-cyclo-dG (cdG) are induced by hydroxyl radicals resulting from oxidative stress such as ionizing radiation. 5',8-cyclopurine-2'-deoxynucleoside lesions are repaired by nucleotide excision repair with low efficiency, thereby leading to their accumulation in the human genome and lesion bypass by DNA polymerases during DNA replication and base excision repair (BER). In this study, for the first time, we discovered that DNA polymerase β (pol β) efficiently bypassed a 5'R-cdA, but inefficiently bypassed a 5'S-cdA during DNA replication and BER. We found that cell extracts from pol β wild-type mouse embryonic fibroblasts exhibited significant DNA synthesis activity in bypassing a cdA lesion located in replication and BER intermediates. However, pol β knock-out cell extracts exhibited little DNA synthesis to bypass the lesion. This indicates that pol β plays an important role in bypassing a cdA lesion during DNA replication and BER. Furthermore, we demonstrated that pol β inserted both a correct and incorrect nucleotide to bypass a cdA at a low concentration. Nucleotide misinsertion was significantly stimulated by a high concentration of pol β, indicating a mutagenic effect induced by pol β lesion bypass synthesis of a 5',8-cyclopurine-2'-deoxynucleoside. Moreover, we found that bypass of a 5'S-cdA by pol β generated an intermediate that failed to be extended by pol β, resulting in accumulation of single-strand DNA breaks. Our study provides the first evidence that pol β plays an important role in bypassing a 5',8-cyclo-dA during DNA replication and repair, as well as new insight into mutagenic effects and genome instability resulting from pol β bypassing of a cdA lesion.

  6. Energy-Efficient Renovation of Educational Buildings

    ERIC Educational Resources Information Center

    Erhorn-Kluttig, Heike; Morck, Ove

    2005-01-01

    Case studies demonstrating energy-efficient renovation of educational buildings collected by the International Energy Agency (IEA) provide information on retrofit technologies, energy-saving approaches and ventilation strategies. Some general findings are presented here along with one case study, Egebjerg School in Denmark, which shows how natural…

  7. First Steps in Planning for Facilities Renovation.

    ERIC Educational Resources Information Center

    Baule, Steven

    1999-01-01

    Discusses how to plan for a new school library media center or renovate an existing facility. Highlights include the importance of a planning team; the role of the architect; brainstorming, including instructional needs, patron services, library administration, and technology infrastructure; site visits to other media centers; and needs…

  8. Remodeling, Renovation, & Conversion of Educational Facilities.

    ERIC Educational Resources Information Center

    Association of Physical Plant Administrators of Universities and Colleges, Washington, DC.

    Based on a series of workshops, this collection of papers provides a framework for thought--emphasizing planning within time, flexibility, and maintenance constraints--as well as a practical guide for actual engineering of remodeling/renovation/conversion projects. Is remodeling always less expensive than new construction? Should high initial…

  9. Renovating Older Schools: Reusing Older Schools Workshop.

    ERIC Educational Resources Information Center

    Mississippi State Univ., Mississippi State. Educational Design Inst.

    A slide presentation examines the decisionmaking process behind whether a community should renovate their older school facilities or abandon them for new facilities. Three factors to be considered in this decision are addressed and involve the school's location, the history of the school, and the relationship of the school to the community and the…

  10. Eight Budget-Stretching Renovation Ideas.

    ERIC Educational Resources Information Center

    Rittner-Heir, Robbin M.

    1997-01-01

    Provides eight tips on how to save money during school district renovation when budgets are tight. Suggestions discussed include the use of volunteers for some basic work, offering summer maintenance positions to existing employees, adding an energy monitoring system, replacing older heating and lighting systems, and renting classroom space during…

  11. The Security Factor in School Renovations.

    ERIC Educational Resources Information Center

    Fickes, Michael

    1998-01-01

    Discusses how one Indiana high school used its renovation as an opportunity to reevaluate the school's security design. Security considerations in the building's external and internal environment include lighting, directional signage, parking, access control technology, and issues regarding the use of closed circuit television. (GR)

  12. Arsenite binding-induced zinc loss from PARP-1 is equivalent to zinc deficiency in reducing PARP-1 activity, leading to inhibition of DNA repair

    SciTech Connect

    Sun, Xi; Zhou, Xixi; Du, Libo; Liu, Wenlan; Liu, Yang; Hudson, Laurie G.; Liu, Ke Jian

    2014-01-15

    Inhibition of DNA repair is a recognized mechanism for arsenic enhancement of ultraviolet radiation-induced DNA damage and carcinogenesis. Poly(ADP-ribose) polymerase-1 (PARP-1), a zinc finger DNA repair protein, has been identified as a sensitive molecular target for arsenic. The zinc finger domains of PARP-1 protein function as a critical structure in DNA recognition and binding. Since cellular poly(ADP-ribosyl)ation capacity has been positively correlated with zinc status in cells, we hypothesize that arsenite binding-induced zinc loss from PARP-1 is equivalent to zinc deficiency in reducing PARP-1 activity, leading to inhibition of DNA repair. To test this hypothesis, we compared the effects of arsenite exposure with zinc deficiency, created by using the membrane-permeable zinc chelator TPEN, on 8-OHdG formation, PARP-1 activity and zinc binding to PARP-1 in HaCat cells. Our results show that arsenite exposure and zinc deficiency had similar effects on PARP-1 protein, whereas supplemental zinc reversed these effects. To investigate the molecular mechanism of zinc loss induced by arsenite, ICP-AES, near UV spectroscopy, fluorescence, and circular dichroism spectroscopy were utilized to examine arsenite binding and occupation of a peptide representing the first zinc finger of PARP-1. We found that arsenite binding as well as zinc loss altered the conformation of zinc finger structure which functionally leads to PARP-1 inhibition. These findings suggest that arsenite binding to PARP-1 protein created similar adverse biological effects as zinc deficiency, which establishes the molecular mechanism for zinc supplementation as a potentially effective treatment to reverse the detrimental outcomes of arsenic exposure. - Highlights: • Arsenite binding is equivalent to zinc deficiency in reducing PARP-1 function. • Zinc reverses arsenic inhibition of PARP-1 activity and enhancement of DNA damage. • Arsenite binding and zinc loss alter the conformation of zinc finger

  13. Meningocele repair

    MedlinePlus

    ... Myelodysplasia repair; Spinal dysraphism repair; Meningomyelocele repair; Neural tube defect repair; Spina bifida repair ... If your child has hydrocephalus, a shunt (plastic tube) will be put in the child's brain to ...

  14. First Light of the Renovated Thacher Observatory

    NASA Astrophysics Data System (ADS)

    O'Neill, Katie; Yin, Yao; Edwards, Nick; Swift, Jonathan

    2017-01-01

    The Thacher Observatory, originally a collaboration between UCLA (P.I. G. Abell), Caltech, Pomona College, and the Thacher School, was built in the early 1960s. The goal of the facility was to serve as a training ground for undergraduate and graduate students in Los Angeles area colleges and also to provide hands-on technical training and experience for Thacher students. It was the birthplace of the Summer Science Program which continues today at other campuses. The observatory has now been fully renovated and modernized with a new, 0.7m telescope and dome that can be controlled remotely and in an automated manner. Science programs involving accurate and precise photometry have been initiated, and we project that we will be presenting the first scientific results of the renovated observatory at this meeting.

  15. Impaired mechanical response of an EDMD mutation leads to motility phenotypes that are repaired by loss of prenylation.

    PubMed

    Zuela, Noam; Zwerger, Monika; Levin, Tal; Medalia, Ohad; Gruenbaum, Yosef

    2016-05-01

    There are roughly 14 distinct heritable autosomal dominant diseases associated with mutations in lamins A/C, including Emery-Dreifuss muscular dystrophy (EDMD). The mechanical model proposes that the lamin mutations change the mechanical properties of muscle nuclei, leading to cell death and tissue deterioration. Here, we developed an experimental protocol that analyzes the effect of disease-linked lamin mutations on the response of nuclei to mechanical strain in living Caenorhabditis elegans We found that the EDMD mutation L535P disrupts the nuclear mechanical response specifically in muscle nuclei. Inhibiting lamin prenylation rescued the mechanical response of the EDMD nuclei, reversed the muscle phenotypes and led to normal motility. The LINC complex and emerin were also required to regulate the mechanical response of C. elegans nuclei. This study provides evidence to support the mechanical model and offers a potential future therapeutic approach towards curing EDMD.

  16. 19 CFR 10.570 - Goods re-entered after repair or alteration in Singapore.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Goods re-entered after repair or alteration in... States-Singapore Free Trade Agreement Goods Returned After Repair Or Alteration § 10.570 Goods re-entered... alterations” means restoration, addition, renovation, re-dyeing, cleaning, re-sterilizing, or other...

  17. 19 CFR 10.827 - Goods re-entered after repair or alteration in Bahrain.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Goods re-entered after repair or alteration in... States-Bahrain Free Trade Agreement Goods Returned After Repair Or Alteration § 10.827 Goods re-entered...” means restoration, addition, renovation, re-dyeing, cleaning, re-sterilizing, or other treatment...

  18. [Control of lead emissions from a battery repair shop in the city of Rio de Janeiro using the air as indicator].

    PubMed

    Quiterio, Simone Lorena; da Silva, Célia Regina Sousa; Arbilla, Graciela; Moreira, Maria de Fátima Ramos; Araújo, Ulisses César; Mattos, Rita de Cássia O da C; Santos, Luiz Sérgio Cardoso

    2003-01-01

    Lead levels in the air surrounding a battery repair shop (BRS) located in the Olaria neighborhood (Rio de Janeiro, Brazil) were monitored from April to July 1999. Most of the samples collected within 25 meters of the BRS exceeded the limit of 1.5 micro g.Pb.m-3 established by the United States Environmental Protection Agency (EPA). These results were published in a previous article (Quiterio et al., 2001). In the current study, installation of a Venture ventilation system and some changes in the operational procedure were proposed. After the modifications in the BRS, a new monitoring campaign was performed (August and September, 2000). Three points were selected for air collection, corresponding to the most critical points found in the previous assessments. The new concentrations ranged from 0.8 to 17.6 micro g.Pb.m-3, showing that lead emissions into the environment had decreased adequately. However, concentration at the chimney exhaust was still higher than EPA limits, and further improvements in the installations and procedures are definitely needed.

  19. Rural Schools Facilities: Additions & Renovations As an Integrated Sequence.

    ERIC Educational Resources Information Center

    Swedberg, Dan

    The community/school relationship is considered vital in helping rural school districts adapt to changing needs through renovation and/or expansion of its school facilities. How these needs are met involves choices that include consolidation with another district, new school construction, or renovation and adding on to an existing school. This…

  20. Lowell Observatory's 24-inch Clark Refractor: Its History and Renovation

    NASA Astrophysics Data System (ADS)

    Schindler, Kevin; Nye, Ralph; Rosenthal, Peter

    2016-01-01

    In 1895, Percival Lowell hired eminent telescope maker Alvan G. Clark to build a 24-inch refractor. Lowell intended the telescope intitally for observing Mars in support of his controversial theories about life on that planet. Clark finished the telescope within a year and at a cost of $20,000. Lowell and his staff of assistants and astronomers began observing through it on July 23, 1896, setting off a long and productive career for the telescope.While Lowell's Mars studies dominated early work with the Clark, V.M. Slipher by the 1910s was using it to observe planetary rotations and atmospheric compositions. He soon revolutionized spectroscopic studies, gathering excruciatingly long spectra - some in excess of 40 hours - of the so-called white nebula and determining startling radial velocities, evidence of an expanding universe. In the 1960s, scientists and artists teamed up on the Clark and created detailed lunar maps in support of the Apollo program.In recent decades, the Clark has played a central role in the education programs at Lowell, with general public audiences, students, and private groups all taking advantage of this unique resource.With this nearly 120 years of contant use, the Clark had been wearing down in recent years. The telescope was becoming more difficult to move, old electrical wiring in the dome was a fire hazard, and many of the telescope's parts needed to be repaired or replaced.In 2013, Lowell Observatory began a fundraising campaign, collecting $291,000 to cover the cost of dome and telescope renovation. Workers removed the entire telescope mount and tube assembly from the dome, examining every part from tube sections to individuals screws. They also stabilized the dome, adding a water vapor barrier and new outer wall while reinforcing the upper dome. The project lasted from January, 2014 through August, 2015. The facility reopened for daytime tours in September, 2015 and evening viewing the following month.

  1. Acoustical components of the Orpheum Theatre renovation

    NASA Astrophysics Data System (ADS)

    Conant, David A.

    2002-05-01

    The before and after acoustically-important listening conditions and measurements are described for a $14.2 million restoration and renovation of this 1,400-seat grand 1929 Movie Palace-at one time the tallest building in Phoenix. Great care was taken to restore all the acoustically good parts of the original design and to subtly modify the acoustically-troublesome parts (including severely focusing dome and sidewalls) so they looked the same but performed properly. A beautiful playhouse was achieved in 1997 with fine, fixed acoustics and conventional audio reinforcement, a surrounding Italian village, plenty of gilt, moving clouds and sunsets overhead. Today, the venue successfully hosts shows from performance art to ballet to jazz. It was not intended (acoustically) to serve classical music but does so on occasion.

  2. Survey of New Jersey schools and day care centers for lead in plumbing solder. Identification of lead solder and prevention of exposure to drinking water contaminated with lead from plumbing solder.

    PubMed

    Berkowitz, M

    1995-10-01

    Levels of lead in drinking water can be high enough to pose a potential health threat to very young children, primarily from the use of lead solder for indoor plumbing. In February 1987, New Jersey banned lead solder for use in the installation or repair of drinking water plumbing systems. However, because lead solder continued to be available for purchase in the state, New Jersey Department of Health staff sought to (i) determine the extent to which schools and day care centers were in compliance with the ban, and (ii) determine the effectiveness of a solder analysis test kit commonly used by plumbing inspectors in the field. Samples of solder were collected from 53 day care centers and 37 schools known to have been constructed or renovated after the ban took effect. Samples from 24% of those facilities constructed or renovated just after the lead ban (1987-1988) tested positive for lead content. However, for those facilities constructed or renovated in later years (1989-1992), there was a decline in the percentage of samples that tested positive for lead content. For this period of time, 13% of the samples tested positive for lead. In total, more than 10% of facilities with new plumbing installed between 1987 and 1992 had solder samples that tested positive for lead. A lead in solder test kit commonly used by inspectors proved to be an effective screening tool for the field. The New Jersey Department of Health recommends continued enforcement of the lead solder ban through inspection and encouragement of behaviors that minimize consumption of potentially lead-contaminated drinking water. In order to assess patterns of water use, staff at the day care centers were asked to complete a questionnaire. Sixty-seven percent of the respondents reported that they "always" use water from the cold tap when preparing drinks or food for the children. In addition, 57% reported that they always first flush the tap before using the water for drinking or food purposes. Posters

  3. Determination of VOCs in the Indoor Air of a New and a Renovated Apartment

    NASA Astrophysics Data System (ADS)

    Meciarova, Ludmila; Vilcekova, Silvia

    2016-06-01

    This study deals with the occurrence of volatile organic compounds (VOCs) in the indoor environment of a new and a renovated apartment. Qualitative determination of VOCs was carried out with a gas chromatograph with surface acoustic wave detector (GC/SAW). Concentrations of total volatile organic compounds (TVOC) were determined by a photoionization detector with UV lamp. Simultaneously, temperature and relative humidity were monitored with a data logger. The aim of this study was to determine of TVOC concentrations, to use of GC/SAW for determination of individual VOCs in indoor air as well as to predict possible sources of VOCs in these apartments. Measurements were performed after each construction work for better resolution of the contributions of individual materials to the levels of VOC. Mean concentrations of TVOC were 624 μg/m3 in the renovated apartment and 1,686 μg/m3 in the new apartment after completion of all works. The results from the renovated apartment showed that the use of new materials can lead to lower levels of organic compounds in indoor air compared to old materials that were less environmentally friendly. Many types of VOCs were found in both apartments. After reviewing the possible sources, it seems that the main sources of these substances were applied coatings and flooring materials.

  4. Photocopy of ground floor plan, ca. 12939. Plans and renovations ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of ground floor plan, ca. 12939. Plans and renovations required for the 1940-1941 addition are overlaid on the original plan - Stamford Post Office, 421 Atlantic Street, Stamford, Fairfield County, CT

  5. Neural Pathway of Renovative and Innovative Products Appreciation

    NASA Astrophysics Data System (ADS)

    Huang, Furong; Chiu, Chiyue; Luo, Jing

    2016-12-01

    According to the level of change an invention makes on existing things and how it overrides people’s mental schemas on established categories, new inventions can be classified into two groups: incremental inventions (i.e., renovations), which make minor improvements on existing designs, and radical inventions (i.e., innovations), which make major developments that enable people to do things they have never been able to do before. Although innovation and renovation are two fundamentally different types of creation that feature new changes ranging from those in product development to those in large scale social changes, and people tend to report higher subjective preferences for incremental inventions compared to radical inventions, the cognitive brain mechanisms underlying the mental representation of these two types of inventions remains unknown. Through the use of innovative and renovative designs as materials, we found that relative to non-creative designs, creative (renovative &innovative) designs enhanced memory or association-related activation in the right parahippocampus. In particular, innovations evoked more activation in the conceptual pathway for representing objects than did renovations, whereas renovations evoked more activation in the motor pathway than innovations. These results suggest that operating experiences may provide advantages for understanding and appreciating creative designs.

  6. Neural Pathway of Renovative and Innovative Products Appreciation.

    PubMed

    Huang, Furong; Chiu, Chiyue; Luo, Jing

    2016-12-12

    According to the level of change an invention makes on existing things and how it overrides people's mental schemas on established categories, new inventions can be classified into two groups: incremental inventions (i.e., renovations), which make minor improvements on existing designs, and radical inventions (i.e., innovations), which make major developments that enable people to do things they have never been able to do before. Although innovation and renovation are two fundamentally different types of creation that feature new changes ranging from those in product development to those in large scale social changes, and people tend to report higher subjective preferences for incremental inventions compared to radical inventions, the cognitive brain mechanisms underlying the mental representation of these two types of inventions remains unknown. Through the use of innovative and renovative designs as materials, we found that relative to non-creative designs, creative (renovative &innovative) designs enhanced memory or association-related activation in the right parahippocampus. In particular, innovations evoked more activation in the conceptual pathway for representing objects than did renovations, whereas renovations evoked more activation in the motor pathway than innovations. These results suggest that operating experiences may provide advantages for understanding and appreciating creative designs.

  7. Neural Pathway of Renovative and Innovative Products Appreciation

    PubMed Central

    Huang, Furong; Chiu, Chiyue; Luo, Jing

    2016-01-01

    According to the level of change an invention makes on existing things and how it overrides people’s mental schemas on established categories, new inventions can be classified into two groups: incremental inventions (i.e., renovations), which make minor improvements on existing designs, and radical inventions (i.e., innovations), which make major developments that enable people to do things they have never been able to do before. Although innovation and renovation are two fundamentally different types of creation that feature new changes ranging from those in product development to those in large scale social changes, and people tend to report higher subjective preferences for incremental inventions compared to radical inventions, the cognitive brain mechanisms underlying the mental representation of these two types of inventions remains unknown. Through the use of innovative and renovative designs as materials, we found that relative to non-creative designs, creative (renovative &innovative) designs enhanced memory or association-related activation in the right parahippocampus. In particular, innovations evoked more activation in the conceptual pathway for representing objects than did renovations, whereas renovations evoked more activation in the motor pathway than innovations. These results suggest that operating experiences may provide advantages for understanding and appreciating creative designs. PMID:27941936

  8. Reconstructing School Renovation: A Study of the Renovation of Johnson-Williams Middle School, Berryville, Virginia. Building Blocks to Better Learning Series, Volume Six.

    ERIC Educational Resources Information Center

    Tuttle, James B., II

    This document provides a case study of the renovation of Johnson-Williams Middle School in Clarke County, Virginia. Chapter 1, "Planning and Designing a School Renovation," describes considerations for measuring the quality of a school renovation project, including its value to users and its imapct on learning. It summarizes the research…

  9. Renovated GOSAT operation beyond the designed lifetime

    NASA Astrophysics Data System (ADS)

    Suto, Hiroshi; Kuze, Akihiko; Shiomi, Kei; Nakajima, Masakatsu

    2016-09-01

    To observe the global column concentration of carbon dioxide (CO2) and methane (CH4) from space, the Greenhouse gases Observing SATellite (GOSAT) was launched on January 23, 2009, and has started the operational observation. Thermal and Near Infrared Sensor for Carbon Observation - Fourier Transform Spectrometer (TANSO-FTS) has been continuously measuring CO2 and CH4 distributions globally, and supporting the global carbon cycle elucidation. It is important to monitor the greenhouse gases in long-term period with same data quality. During 7.5 years operational periods, GOSAT passed the designed lifetime, which is 5 years, and some components report the change of characteristic in-orbit. The pointing mechanism, which has a capability of change a line of scene both of along track and cross track, is equipped on GOSAT. To keep the quality of spectra from TANSO-FTS and try to ambitious observation plan, the pointing mechanism is switched to the backup one in January 2015. In addition, the spectral resolution is degraded due to the bias of ZPD position science 2014. The compensation algorithm is developed and implemented on the operational system and completed the reprocessing for all passed observation data. The pointing mechanism, observation pattern, and processing algorithm were renovated, and GOSAT can provide the long-term and consistent quality spectra.

  10. Does radiation-induced abrogation of skin Langerhans cell functions lead to enhanced incidence of skin tumors in patients with genetic disorders of DNA repair

    SciTech Connect

    Becker, Y.

    1987-01-01

    A hypothesis is presented which states that persons with the genetic disorders xeroderma pigmentosum and ataxia-telangiectasia, manifested by a deficiency of DNA repair, develop cutaneous tumors due to the elimination of reticuloendothelial system cells (Langerhans cells) in the skin, and the subsequent loss of control of epidermal cellular elements. 84 references.

  11. Bethune-Cookman University STEM Research Lab. DOE Renovation Project

    SciTech Connect

    Thompson, Herbert W.

    2012-03-31

    DOE funding was used to renovate 4,500 square feet of aging laboratories and classrooms that support science, engineering, and mathematics disciplines (specifically environmental science, and computer engineering). The expansion of the labs was needed to support robotics and environmental science research, and to better accommodate a wide variety of teaching situations. The renovated space includes a robotics laboratory, two multi-use labs, safe spaces for the storage of instrumentation, modern ventilation equipment, and other “smart” learning venues. The renovated areas feature technologies that are environmentally friendly with reduced energy costs. A campus showcase, the laboratories are a reflection of the University’s commitment to the environment and research as a tool for teaching. As anticipated, the labs facilitate the exploration of emerging technologies that are compatible with local and regional economic plans.

  12. The Renovation and Future Capabilities of the Thacher Observatory

    NASA Astrophysics Data System (ADS)

    O'Neill, Katie; Osuna, Natalie; Edwards, Nick; Klink, Douglas; Swift, Jonathan; Vyhnal, Chris; Meyer, Kurt

    2016-01-01

    The Thacher School is in the process of renovating the campus observatory with a new meter class telescope and full automation capabilities for the purpose of scientific research and education. New equipment on site has provided a preliminary site characterization including seeing and V-band sky brightness measurements. These data, along with commissioning data from the MINERVA project (which uses comparable hardware) are used to estimate the capabilities of the observatory once renovation is complete. Our V-band limiting magnitude is expected to be better than 21.3 for a one minute integration time, and we estimate that milli-magnitude precision photometry will be possible for a V=14.5 point source over approximately 5 min timescales. The quick response, autonomous operation, and multi-band photometric capabilities of the renovated observatory will make it a powerful follow-up science facility for exoplanets, eclipsing binaries, near-Earth objects, stellar variability, and supernovae.

  13. Space planning: a renovation saga involving library users.

    PubMed

    Norton, Hannah F; Butson, Linda C; Tennant, Michele R; Botero, Cecilia E

    2013-01-01

    From 2010 to 2012, librarians at the University of Florida Health Science Center Library (HSCL) used an online survey and focus groups to gather user input on preferences for an ideal library space. User input guided the HSCL's renovation plans and put a clear focus on enhancing technology, improving infrastructure, enabling group collaboration, and creating comfortable spaces. Additional communication with users during renovation was vital in ensuring continued usability of nonconstruction spaces and shared understanding of the construction timeline. While specific user suggestions are particular to the HSCL, overall themes and methods for eliciting input will be useful to other libraries undergoing space planning.

  14. Development of Facilities Master Plan and Laboratory Renovation Project

    SciTech Connect

    Fox, Andrea D

    2011-10-03

    Funding from this grant has allowed Morehouse School of Medicine to complete its first professionally developed, comprehensive campus master plan that is in alignment with the recently completed strategic plan. In addition to master planning activities, funds were used for programming and designing research renovations, and also to supplement other research facility upgrades by providing lighting and equipment. The activities funded by this grant will provide the catalyst for substantial improvement in the School's overall facilities for biomedical education and research, and will also provide much of the information needed to conduct a successful campaign to raise funds for proposed buildings and renovations.

  15. Rapid new methods for paint collection and lead extraction.

    PubMed

    Gutknecht, William F; Harper, Sharon L; Winstead, Wayne; Sorrell, Kristen; Binstock, David A; Salmons, Cynthia A; Haas, Curtis; McCombs, Michelle; Studabaker, William; Wall, Constance V; Moore, Curtis

    2009-01-01

    Chronic exposure of children to lead can result in permanent physiological impairment. In adults, it can cause irritability, poor muscle coordination, and nerve damage to the sense organs and nerves controlling the body. Surfaces coated with lead-containing paints are potential sources of exposure to lead. In April 2008, the U.S. Environmental Protection Agency (EPA) finalized new requirements that would reduce exposure to lead hazards created by renovation, repair, and painting activities, which disturb lead-based paint. On-site, inexpensive identification of lead-based paint is required. Two steps have been taken to meet this challenge. First, this paper presents a new, highly efficient method for paint collection that is based on the use of a modified wood drill bit. Second, this paper presents a novel, one-step approach for quantitatively grinding and extracting lead from paint samples for subsequent lead determination. This latter method is based on the use of a high-revolutions per minute rotor with stator to break up the paint into approximately 50 micron-size particles. Nitric acid (25%, v/v) is used to extract the lead in <3 minutes. Recoveries are consistently >95% for real-world paints, National Institute of Standards and Technology's standard reference materials, and audit samples from the American Industrial Hygiene Association's Environmental Lead Proficiency Analytical Testing Program. This quantitative extraction procedure, when paired with quantitative paint sample collection and lead determination, may enable the development of a lead paint test kit that will meet the specifications of the final EPA rule.

  16. 45 CFR 1309.11 - Cost comparison for purchase, construction and major renovation of facilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... major renovation of facilities. 1309.11 Section 1309.11 Public Welfare Regulations Relating to Public... ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START PROGRAM HEAD START FACILITIES PURCHASE, MAJOR... major renovation of facilities. (a) A grantee proposing to acquire or undertake a major renovation of...

  17. Use of a graft of demineralized bone matrix along with TGF-β1 leads to an early bone repair in dogs.

    PubMed

    Servin-Trujillo, Miguel Angel; Reyes-Esparza, Jorge Alberto; Garrido-Fariña, German; Flores-Gazca, Enrique; Osuna-Martinez, Ulises; Rodriguez-Fragoso, Lourdes

    2011-09-01

    Tibia fractures are common in small animal practice. Over the past decade, improvements to animal internal fracture fixation have been developed. TGF-β1 has been shown to be crucial in the development, induction and repair of bone. In present study, we investigate the effect of local application of a graft demineralized bone matrix (DBM) along with TGF-β1 in a model of open osteotomy induced experimentally in dogs. Tibia fracture was brought about by using an open osteotomy model in young male dogs. Fracture repair was evaluated by a histological and biochemical analysis. Collagen content, proteolytic activity and urokinase-type plasminogen activator (uPA) expression were analyzed at the end of the study. Radiographic analysis, alkaline phosphatase and hematological evaluation were performed weekly. At the fifth week, there was an improvement and restoration of bone architecture in animals treated with a graft containing TGF-β1 (5 ng/ml) compared with the control and graft groups, as was evidenced by the presence of an early formation of wide callus and bone regeneration. In addition, local application of TGF-β1 led to an increase in collagen and proteolytic activity. More immunopositive osteoclast and mesenchymal cells were found in bone tissue from animals treated with TGF-β1 as compared with the control group. No changes in alkaline phosphatase, hematological and clinical parameters were observed. This study shows that the combined use of DBM along with TGF-β1 is able to improve and accelerate the bone repair.

  18. Rhamm−/− fibroblasts are defective in CD44-mediated ERK1,2 motogenic signaling, leading to defective skin wound repair

    PubMed Central

    Tolg, Cornelia; Hamilton, Sara R.; Nakrieko, Kerry-Ann; Kooshesh, Fatemeh; Walton, Paul; McCarthy, James B.; Bissell, Mina J.; Turley, Eva A.

    2006-01-01

    Rhamm (receptor for hyaluronan-mediated motility) is an hyaluronan binding protein with limited expression in normal tissues and high expression in advanced cancers. To understand its physiological functions and identify the molecular mechanisms underlying these functions, we created mice with a genetic deletion of Rhamm. We show that Rhamm−/− fibroblasts fail to resurface scratch wounds >3 mm or invade hyaluronan-supplemented collagen gels in culture. We identify a requirement for Rhamm in the localization of CD44 to the cell surface, formation of CD44–ERK1,2 (extracellular-regulated kinase 1,2) complexes, and activation/subcellular targeting of ERK1,2 to the cell nucleus. We also show that cell surface Rhamm, restricted to the extracellular compartment by linking recombinant protein to beads, and expression of mutant active mitogen-activated kinase kinase 1 (Mek1) are sufficient to rescue aberrant signaling through CD44–ERK1,2 complexes in Rh−/− fibroblasts. ERK1,2 activation and fibroblast migration/differentiation is also defective during repair of Rh−/− excisional skin wounds and results in aberrant granulation tissue in vivo. These results identify Rhamm as an essential regulator of CD44–ERK1,2 fibroblast motogenic signaling required for wound repair. PMID:17158951

  19. AFRL Solid Propellant Laboratory Explosive Siting and Renovation Lessons Learned

    DTIC Science & Technology

    2010-07-01

    Siting and Renovation Lessons Learned Daniel F. Schwartz Air Force Research Laboratory Propulsion Directorate, 10 E. Saturn Blvd. Edwards AFB, CA...rocket propulsion technologies, the Air Force Research Laboratory ( AFRL ) Propulsion Directorate (RZ- West), located at EAFB routinely manufactures, tests...Schwartz Air Force Research Laboratory Propulsion Directorate, Edwards AFB 2010 DDESB Seminar Portland, OR 13-15

  20. Tribal Child Care Facilities: A Guide to Construction and Renovation

    ERIC Educational Resources Information Center

    US Department of Health and Human Services, 2006

    2006-01-01

    The Personal Responsibility and Work Opportunity Reconciliation Act of 1996 allowed Tribes to use Child Care and Development Fund (CCDF) monies for the construction or renovation of child care facilities. As procedures have been implemented over the years, Tribes and Administration for Children and Families (ACF) Regional Offices have identified a…

  1. Tribal Child Care Facilities: A Guide to Construction and Renovation.

    ERIC Educational Resources Information Center

    National Child Care Information Center, Vienna, VA.

    This document provides technical assistance in addressing major areas of the child care facility construction and renovation process, including conducting a child care community needs assessment, identifying a site, financing costs, developing a business plan, conducting an environmental assessment, building and designing a facility, and hiring…

  2. Renovation and Management Effects on Pasture Productivity Under Rotational Grazing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Adapted, perennial grasses with improved yield or persistence are available for pasture renovation, but grazers must consider how productive and persistent the new grass will be compared to their existing grasses under their current management. Our objective was to compare the productivity and pers...

  3. Renovation and Management Effects on Pasture Productivity Under Rotational Grazing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Renovating permanent pasture to replace existing cool-season perennial grasses with improved varieties has potential risk and reward. Improved grasses may increase long-term productivity, but these increases should offset costs associated with replacing an existing stand. We eliminated existing pe...

  4. Renovating To Support the Seven Ways Students Are Smart.

    ERIC Educational Resources Information Center

    Bete, Tim, Ed.

    1997-01-01

    Describes one school's approach to school renovation that supported the seven ways in which students are smart as advocated by Howard Gardner's Multiple Intelligences (MI) theory. It includes a highlighted section on MI that covers its framework, descriptions of each intelligences, and five entry points to the MI framework. (GR)

  5. Common Day Care Safety Renovations: Descriptions, Explanations and Cost Estimates.

    ERIC Educational Resources Information Center

    Spack, Stan

    This booklet explains some of the day care safety features specified by the new Massachusetts State Building Code (January 1, 1975) which must be met before a new day care center can be licensed. The safety features described are those which most often require renovation to meet the building code standards. Best estimates of the costs involved in…

  6. AFRL Solid Propellant Laboratory Explosive Siting and Renovation Lessons Learned

    DTIC Science & Technology

    2010-05-19

    AFRL Solid Propellant Laboratory Explosive Siting and Renovation Lessons Learned Daniel F. Schwartz Air Force Research Laboratory ...9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) Air Force Research Laboratory (AFMC) AFRL /RZS...provide the United States Air Force with advanced rocket propulsion technologies, the Air Force Research

  7. Resource Book for Furniture Renovation, Refinishing and Reupholstering.

    ERIC Educational Resources Information Center

    Barton, Diane; Robinson, Jay

    This resource book for furniture renovation (refinishing and reupholstering) is one of four resource books developed for use in Code 30 or adult vocational programs in the home furnishings service area. Representative, illustrative, and informative materials contained in the resource book are Furniture Woods, Cuts and Matching Veneers, Wood…

  8. Compliance with 504 regulations need not require costly renovation.

    PubMed

    Rees, F W; Gary, J G

    1978-05-16

    By June 3, 1980, all hospitals receiving federal funds must have completed plans to make facilities accessible to the handicapped. In many instances, doing so will require hospitals to renovate existing facilities. However, through careful interpretation of the law and creative planning, hospitals can avoid making expensive, unnecessary building modifications.

  9. Modern offices now occupying the completely renovated "machine shop" area ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Modern offices now occupying the completely renovated "machine shop" area (see drawing copy NV-35-B-5) at the Southeast corner of the building. - Bureau of Mines Metallurgical Research Laboratory, Original Building, Date Street north of U.S. Highway 93, Boulder City, Clark County, NV

  10. Maintaining High-Performance Schools after Construction or Renovation

    ERIC Educational Resources Information Center

    Luepke, Gary; Ronsivalli, Louis J., Jr.

    2009-01-01

    With taxpayers' considerable investment in schools, it is critical for school districts to preserve their community's assets with new construction or renovation and effective facility maintenance programs. "High-performance" school buildings are designed to link the physical environment to positive student achievement while providing such benefits…

  11. 40 CFR 61.145 - Standard for demolition and renovation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... where the asbestos-containing waste material will be deposited. (xiii) A certification that at least one... for Asbestos § 61.145 Standard for demolition and renovation. (a) Applicability. To determine which... presence of asbestos, including Category I and Category II nonfriable ACM. The requirements of...

  12. 45 CFR 1309.5 - Eligibility-Major Renovations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Eligibility-Major Renovations. 1309.5 Section 1309.5 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES,...

  13. 45 CFR 1309.5 - Eligibility-Major Renovations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 4 2013-10-01 2013-10-01 false Eligibility-Major Renovations. 1309.5 Section 1309.5 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES,...

  14. 45 CFR 1309.5 - Eligibility-Major Renovations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 4 2014-10-01 2014-10-01 false Eligibility-Major Renovations. 1309.5 Section 1309.5 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES,...

  15. 45 CFR 1309.5 - Eligibility-Major Renovations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 4 2012-10-01 2012-10-01 false Eligibility-Major Renovations. 1309.5 Section 1309.5 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES,...

  16. 45 CFR 1309.5 - Eligibility-Major Renovations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 4 2011-10-01 2011-10-01 false Eligibility-Major Renovations. 1309.5 Section 1309.5 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES,...

  17. Renovating Interior Office Space: What a Manager Needs To Consider.

    ERIC Educational Resources Information Center

    Babey, Evelyn R.

    When planning an office renovation, a manager should design an office layout that is efficient and should consider the psychological aspects of office design, including sound level, color harmony, and lighting. The manager must also have a good understanding of all phases of the project plan and the timing involved. There are basically five phases…

  18. Renovating Early Childhood Education Pedagogy: A Case Study in Vietnam

    ERIC Educational Resources Information Center

    Thao, Dang Phuong; Boyd, Wendy Anne

    2014-01-01

    Since 2003, the Vietnamese government has prioritised curriculum reform efforts and commitment to improving the quality of the national curriculum. The Vietnamese early childhood education renovation has encountered considerable changes and challenges, particularly in the area of pedagogical approaches. Many early childhood teachers continue to…

  19. Hepatitis B virus pre-S2 mutant large surface protein inhibits DNA double-strand break repair and leads to genome instability in hepatocarcinogenesis.

    PubMed

    Hsieh, Yi-Hsuan; Chang, Yu-Ying; Su, Ih-Jen; Yen, Chia-Jui; Liu, Yi-Ru; Liu, Ren-Jei; Hsieh, Wen-Chuan; Tsai, Hung-Wen; Wang, Lily Hui-Ching; Huang, Wenya

    2015-07-01

    Although hepatitis B virus (HBV) has been established to cause hepatocellular carcinoma (HCC), the exact mechanism remains to be clarified. Type II ground glass hepatocytes (GGHs) harbouring the HBV pre-S2 mutant large surface protein (LHBS) have been recognized as a morphologically distinct hallmark of HCC in the advanced stages of chronic HBV infection. Considering its preneoplastic nature, we hypothesized that type II GGH may exhibit high genomic instability, which is important for the carcinogenic process in chronic HBV carriers. In this study we found that pre-S2 mutant LHBS directly interacted with importin α1, the key factor that recognizes cargos undergoing nuclear transportation mediated by the importin α/β-associated nuclear pore complex (NPC). By interacting with importin α1, which inhibits its function as an NPC factor, pre-S2 mutant LHBS blocked nuclear transport of an essential DNA repair and recombination factor, Nijmegen breakage syndrome 1 (NBS1), upon DNA damage, thereby delaying the formation of nuclear foci at the sites of DNA double-strand breaks (DSBs). Pre-S2 mutant LHBS was also found to block NBS1-mediated homologous recombination repair and induce multi-nucleation of cells. In addition, pre-S2 mutant LHBS transgenic mice showed genomic instability, indicated by increased global gene copy number variations (CNVs), which were significantly higher than those in hepatitis B virus X mice, indicating that pre-S2 mutant LHBS is the major viral oncoprotein inducing genomic instability in HBV-infected hepatocytes. Consistently, the human type II GGHs in HCC patients exhibited increased DNA DSBs representing significant genomic instability. In conclusion, type II GGHs harbouring HBV pre-S2 mutant oncoprotein represent a high-risk marker for the loss of genome integrity in chronic HBV carriers and explain the complex chromosome changes in HCCs. Mouse array CGH raw data: GEO Accession No. GSE61378 (http://www.ncbi

  20. 76 FR 58268 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-20

    ...-Based Paint Activities and Renovation, Repair, and Painting AGENCY: Environmental Protection Agency (EPA... Certification, Accreditation and Standards for Lead- Based Paint Activities and Renovation, Repair, and Painting..., Accreditation and Standards for Lead-Based Paint Activities and Renovation, Repair, and Painting. ICR...

  1. An Award-Winning Approach To Lead Safety.

    ERIC Educational Resources Information Center

    Compton-Lilly, Catherine

    2002-01-01

    Details how a lead safety project funded in the Toyota Tapestry Grant program provided students with the resources to test for and discover lead present in their recently renovated school. Discusses how the lead safety project played out across grade levels within the school. (DDR)

  2. Renovation and Expansion of the Caspary Research Building. Final Report

    SciTech Connect

    Grassia, V. L.

    2004-02-07

    Critical to the Hospital's rebuilding efforts have been its public partners at the federal, state, and local government levels who have made a major financial commitment to renovating the Hospital's research infrastructure. To date, the Hospital for Special Surgery (HSS) has been awarded a total of nearly $8.5 million to create and equip new, state-of-the-art laboratories for scientific investigations. The modernization of the Hospital's research facilities was jump-started in 1998 with a $950,000 seed grant from the National Institutes of Health (NIH) to renovate laboratories for immunology research in the Caspary Research Building. Coupled with a matching $5.5 million commitment from HSS, this infusion of NIH funding laid the groundwork for an overhaul of all of the Hospital's research space.

  3. EPA Begins Effort to Reduce Children's Exposure to Lead Paint in Lewiston/Auburn, Maine Area

    EPA Pesticide Factsheets

    EPA is beginning an effort to improve compliance with laws that protect children from lead paint poisoning by sending certified letters to about 400 home renovation & painting contractors, property mgmt companies & landlords in & around Lewiston/Auburn, ME

  4. EPA Settlements Help Protect Public Against Health Hazards from Lead Exposure

    EPA Pesticide Factsheets

    WASHINGTON -- The U.S. Environmental Protection Agency (EPA) today announced 75 enforcement actions from the past year that require renovation contractors and training providers to protect people from harmful exposure to lead dust and debris, as req

  5. Health Outcomes and Green Renovation of Affordable Housing

    PubMed Central

    Breysse, Jill; Jacobs, David E.; Weber, William; Dixon, Sherry; Kawecki, Carol; Aceti, Susan; Lopez, Jorge

    2011-01-01

    Objective This study sought to determine whether renovating low-income housing using “green” and healthy principles improved resident health and building performance. Methods We investigated resident health and building performance outcomes at baseline and one year after the rehabilitation of low-income housing using Enterprise Green Communities green specifications, which improve ventilation; reduce moisture, mold, pests, and radon; and use sustainable building products and other healthy housing features. We assessed participant health via questionnaire, provided Healthy Homes training to all participants, and measured ventilation, carbon dioxide, and radon. Results Adults reported statistically significant improvements in overall health, asthma, and non-asthma respiratory problems. Adults also reported that their children's overall health improved, with significant improvements in non-asthma respiratory problems. Post-renovation building performance testing indicated that the building envelope was tightened and local exhaust fans performed well. New mechanical ventilation was installed (compared with no ventilation previously), with fresh air being supplied at 70% of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers standard. Radon was <2 picocuries per liter of air following mitigation, and the annual average indoor carbon dioxide level was 982 parts per million. Energy use was reduced by 45% over the one-year post-renovation period. Conclusions We found significant health improvements following low-income housing renovation that complied with green standards. All green building standards should include health requirements. Collaboration of housing, public health, and environmental health professionals through integrated design holds promise for improved health, quality of life, building operation, and energy conservation. PMID:21563714

  6. SAR11 lipid renovation in response to phosphate starvation.

    PubMed

    Carini, Paul; Van Mooy, Benjamin A S; Thrash, J Cameron; White, Angelicque; Zhao, Yanlin; Campbell, Emily O; Fredricks, Helen F; Giovannoni, Stephen J

    2015-06-23

    Phytoplankton inhabiting oligotrophic ocean gyres actively reduce their phosphorus demand by replacing polar membrane phospholipids with those lacking phosphorus. Although the synthesis of nonphosphorus lipids is well documented in some heterotrophic bacterial lineages, phosphorus-free lipid synthesis in oligotrophic marine chemoheterotrophs has not been directly demonstrated, implying they are disadvantaged in phosphate-deplete ecosystems, relative to phytoplankton. Here, we show the SAR11 clade chemoheterotroph Pelagibacter sp. str. HTCC7211 renovates membrane lipids when phosphate starved by replacing a portion of its phospholipids with monoglucosyl- and glucuronosyl-diacylglycerols and by synthesizing new ornithine lipids. Lipid profiles of cells grown with excess phosphate consisted entirely of phospholipids. Conversely, up to 40% of the total lipids were converted to nonphosphorus lipids when cells were starved for phosphate, or when growing on methylphosphonate. Cells sequentially limited by phosphate and methylphosphonate transformed >75% of their lipids to phosphorus-free analogs. During phosphate starvation, a four-gene cluster was significantly up-regulated that likely encodes the enzymes responsible for lipid renovation. These genes were found in Pelagibacterales strains isolated from a phosphate-deficient ocean gyre, but not in other strains from coastal environments, suggesting alternate lipid synthesis is a specific adaptation to phosphate scarcity. Similar gene clusters are found in the genomes of other marine α-proteobacteria, implying lipid renovation is a common strategy used by heterotrophic cells to reduce their requirement for phosphorus in oligotrophic habitats.

  7. Mean-field dynamo action in renovating shearing flows.

    PubMed

    Kolekar, Sanved; Subramanian, Kandaswamy; Sridhar, S

    2012-08-01

    We study mean-field dynamo action in renovating flows with finite and nonzero correlation time (τ) in the presence of shear. Previous results obtained when shear was absent are generalized to the case with shear. The question of whether the mean magnetic field can grow in the presence of shear and nonhelical turbulence, as seen in numerical simulations, is examined. We show in a general manner that, if the motions are strictly nonhelical, then such mean-field dynamo action is not possible. This result is not limited to low (fluid or magnetic) Reynolds numbers nor does it use any closure approximation; it only assumes that the flow renovates itself after each time interval τ. Specifying to a particular form of the renovating flow with helicity, we recover the standard dispersion relation of the α(2)Ω dynamo, in the small τ or large wavelength limit. Thus mean fields grow even in the presence of rapidly growing fluctuations, surprisingly, in a manner predicted by the standard quasilinear closure, even though such a closure is not strictly justified. Our work also suggests the possibility of obtaining mean-field dynamo growth in the presence of helicity fluctuations, although having a coherent helicity will be more efficient.

  8. On the Testing of Renovations Inside Historical Opera Houses

    NASA Astrophysics Data System (ADS)

    Fausti, P.; Prodi, N.

    2002-11-01

    Due to the large number of historical opera houses in Italy, many theatres have been renovated in the past, but still more will undergo major restoration in the near future. Unfortunately in this context, the quality and protection of acoustics is rarely considered as an issue of its own. As a consequence, the renovations are hardly ever accompanied by proper scientific and technical support. In this paper, the acoustical impact of works inside the Teatro Municipale "R.Valli" in Reggio Emilia, including the restoration of the main hall and the construction of a new acoustic shell, will be dealt with. Surveys were held in the theatre before renovation and were repeated with identical procedure and instruments after its completion. By means of a comparative analysis of the architectural project and of acoustical data, the impact of major changes in the theatre can be predicted. It is shown that this approach can help in drafting an operational scheme for safeguarding the acoustics of historical opera houses.

  9. Eardrum repair

    MedlinePlus

    ... Ossicular fixation - surgery Images Eardrum repair - series References Adams ME, El-Kashlan HK. Tympanoplasty and ossiculoplasty. In: ... commercial use must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map FAQs Customer ...

  10. Hydrocele repair

    MedlinePlus

    ... is excellent. However, another hydrocele may form over time, or if there was also a hernia present. Alternative Names Hydrocelectomy Images Hydrocele repair - series References Aiken JJ, Oldham KT. Inguinal hernias. In: ...

  11. DNA excision repair at telomeres.

    PubMed

    Jia, Pingping; Her, Chengtao; Chai, Weihang

    2015-12-01

    DNA damage is caused by either endogenous cellular metabolic processes such as hydrolysis, oxidation, alkylation, and DNA base mismatches, or exogenous sources including ultraviolet (UV) light, ionizing radiation, and chemical agents. Damaged DNA that is not properly repaired can lead to genomic instability, driving tumorigenesis. To protect genomic stability, mammalian cells have evolved highly conserved DNA repair mechanisms to remove and repair DNA lesions. Telomeres are composed of long tandem TTAGGG repeats located at the ends of chromosomes. Maintenance of functional telomeres is critical for preventing genome instability. The telomeric sequence possesses unique features that predispose telomeres to a variety of DNA damage induced by environmental genotoxins. This review briefly describes the relevance of excision repair pathways in telomere maintenance, with the focus on base excision repair (BER), nucleotide excision repair (NER), and mismatch repair (MMR). By summarizing current knowledge on excision repair of telomere damage and outlining many unanswered questions, it is our hope to stimulate further interest in a better understanding of excision repair processes at telomeres and in how these processes contribute to telomere maintenance.

  12. In vitro isolation and cultivation of human chondrocytes for osteoarthritis renovation.

    PubMed

    Xu, Jiaming; Zhang, Changqing

    2014-08-01

    The purpose of this study was to evaluate the repair effects of chondrocytes that were cultured in vitro on osteoarthritis (OA). Chondrocytes were isolated from fetal rabbits and cultured in Biosilon microcarriers. Sixty rabbits were randomly divided into three groups equally (blank group, model group, treatment group). The rabbit knee OA model was established by inducing papain. Rabbits in the treatment group were injected with the chondrocytes that were cultured in vitro. Hematoxylin-eosin (HE) staining and gross morphologic observation were conducted. Expression level of cytokines such as IL-1bβ, IL-6, and TNF-α in cartilage synovial cells was also analyzed by an ELISA assay. The cultured chondrocyte was validated by a positive stain of type II collagen and vimentin by immunofluorescence. Compared to the model group, the articular cartilage of the rabbit knee in the treatment group showed a normal color, smooth surface, and none of malacia and coloboma. HE staining indicated that the articular surface of the treatment group tended to be smooth and flat; the matrix stained tinge and the cartilage destruction and fiber hyperplasia of the synovia were lightened. The expression levels of IL-1bβ, IL-6, and TNF-α also declined in the treatment group. OA symptoms were improved by treating with chondrocytes. In summary, the animal experiment in the present study indicated that chondrocyte injection played an active effect on renovation of OA.

  13. Bonded composite repair of composite structures

    NASA Astrophysics Data System (ADS)

    Mahler, Mary A.

    Repair and maintenance cost drives a large percentage of the lifetime cost of aircraft structures. Understanding repair issues can lead to a structure that significantly lowers the lifetime cost. Advanced composite materials, while offering the potential to increase aircraft capabilities with minimum weight, are more susceptible to repairable damage than conventional aircraft materials. Improved inspection and repair methods are required to ensure structural integrity and aircraft readiness in the existing operational environment. Many of today's innovative composite designs may result in aircraft structures that are unreasonably difficult to repair. As a first step, technical issues associated with bonded composite repair of composite structures were investigated. An extensive literature review identified many areas where real world composite repairs are being used successfully. An electronic database was developed summarizing the publications found during the literature review. The database includes publication, experimental test results and analytical results of advanced composite bonded repairs. The current analysis of repair does not account for the variations that exist in repair. To facilitate the analysis, a finite element interface was developed to provide analysts with a tool that would create complete finite element models of repaired structures efficiently and in a 3-dimensional view. The finite element models created by the developed interface were successfully correlated to test data for accuracy of the results. Parametric studies were performed using the interface to evaluate effects of repair variables. Thermal impact of repair on the repair panel is one area lacking attention in the repair literature. To understand the impact of heat and thermal gradients of the repair, an analytical investigation was performed to evaluate. the parameters affected by heat. For a solid laminate, the temperature at the adhesive bondline was investigated. The primary

  14. Tissue repair

    PubMed Central

    2010-01-01

    As living beings that encounter every kind of traumatic event from paper cut to myocardial infarction, we must possess ways to heal damaged tissues. While some animals are able to regrow complete body parts following injury (such as the earthworm who grows a new head following bisection), humans are sadly incapable of such feats. Our means of recovery following tissue damage consists largely of repair rather than pure regeneration. Thousands of times in our lives, a meticulously scripted but unseen wound healing drama plays, with cells serving as actors, extracellular matrix as the setting and growth factors as the means of communication. This article briefly reviews the cells involved in tissue repair, their signaling and proliferation mechanisms and the function of the extracellular matrix, then presents the actors and script for the three acts of the tissue repair drama. PMID:21220961

  15. Energy-efficient Renovation of a Real Estate in AUSTRIA

    NASA Astrophysics Data System (ADS)

    Korjenic, Azra; Vašková, Anna

    2015-11-01

    An action have cities worldwide, due to urbanization. More than 70 percent of people in Europe live in cities, where 70 percent of the energy consumed. Without adequate measures, a rapidly growing city is at risk in by overloading the infrastructure, threats to water, energy, pollution, logistical bottlenecks and lack of housing. This paper describes an energy-efficient renovation or expansion planning a real estate in Vorarlberg, Austria. The settlement was analysed in more detail here, it involves the city Dornbirn- part Shor. The study investigated how to extend this settlement energy efficient and what feed for factors in the assessment.

  16. Mobile medical clinics offer alternative to renovation and construction.

    PubMed

    Ayres, D

    1997-01-01

    Mobile Health Care Programs have many attributes. Every organization genuinely concerned with client access to their services should consider having one. When the need to service outlying areas arises, a mobile clinic offers more flexibility and is the most economically feasible alternative. Granted, there is no shortage of vacant structures for rent or purchase in rural America. That, of course, is just the start; you also have the expense of renovating the interior to accommodate the patients and staff. And do not forget the four P's: Planners, Permits, Politics and Payola (taxes and fees).

  17. New Construction, Renovation and Remodeling: What School Nurses Have Learned from Planning New Health Office Facilities

    ERIC Educational Resources Information Center

    Cooper, Leslie

    2005-01-01

    Many school nurses across the nation have had the opportunity to be involved with school renovation and new construction projects in their districts. Renovation and new construction projects allow school nurses the opportunity to work with facilities planners, school officials, and architects to design school health office facilities that enhance…

  18. 45 CFR 98.84 - Construction and renovation of child care facilities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... CHILD CARE AND DEVELOPMENT FUND Indian Tribes § 98.84 Construction and renovation of child care... 45 Public Welfare 1 2014-10-01 2014-10-01 false Construction and renovation of child care... child care facilities (including paying the cost of amortizing the principal and paying interest...

  19. Changing Education through Learning Spaces: Impacts of the Portuguese School Buildings' Renovation Programme

    ERIC Educational Resources Information Center

    Veloso, Luísa; Marques, Joana S.; Duarte, Alexandra

    2014-01-01

    In this article we present findings from the evaluation study of a nation-wide school renovation programme in Portugal. The aim is to analyse policy implementation, taking into account school community participation, discussing how the programme requirement to involve users in the renovation was met, examining perceptions of the programme's…

  20. 45 CFR 98.84 - Construction and renovation of child care facilities.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... CHILD CARE AND DEVELOPMENT FUND Indian Tribes § 98.84 Construction and renovation of child care... 45 Public Welfare 1 2012-10-01 2012-10-01 false Construction and renovation of child care... child care facilities (including paying the cost of amortizing the principal and paying interest...

  1. 45 CFR 98.84 - Construction and renovation of child care facilities.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... CHILD CARE AND DEVELOPMENT FUND Indian Tribes § 98.84 Construction and renovation of child care... 45 Public Welfare 1 2013-10-01 2013-10-01 false Construction and renovation of child care... child care facilities (including paying the cost of amortizing the principal and paying interest...

  2. 45 CFR 98.84 - Construction and renovation of child care facilities.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CHILD CARE AND DEVELOPMENT FUND Indian Tribes § 98.84 Construction and renovation of child care... 45 Public Welfare 1 2010-10-01 2010-10-01 false Construction and renovation of child care... child care facilities (including paying the cost of amortizing the principal and paying interest...

  3. 45 CFR 1309.10 - Applications for the purchase, construction and major renovation of facilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... major renovation of facilities. 1309.10 Section 1309.10 Public Welfare Regulations Relating to Public... ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START PROGRAM HEAD START FACILITIES PURCHASE, MAJOR... major renovation of facilities. A grantee which proposes to use grant funds to purchase a facility, or...

  4. Historic Schools: Renovation vs. Replacement & the Role of a Feasibility Study.

    ERIC Educational Resources Information Center

    National Trust for Historic Preservation, Washington, DC.

    Weighing the pros and cons of renovating a historic neighborhood school or building a new one takes preservation "know-how," experience, and creativity. The potential for renovation is routinely dismissed without full consideration of the facts and long-term implications. Central to this decision-making process is the feasibility study,…

  5. The Effects of an Education Program on Home Renovation for Fall Prevention of Korean Older People

    ERIC Educational Resources Information Center

    Jang, Miseon; Lee, Yeunsook

    2015-01-01

    This study aims to verify the effects of an education program on home renovation for fall prevention among older people, more specifically fall efficacy and home renovation intentions. A quasiexperimental study with nonequivalent control and comparative groups was conducted to demonstrate the effects of the education. A total of 51 older people…

  6. Maintaining Acceptable Indoor Air Quality during the Renovation of a School. Technical Bulletin.

    ERIC Educational Resources Information Center

    Jacobs, Bruce W.

    Information that school facility personnel can use concerning the potential impacts of renovation projects on indoor air quality (IAQ), along with details of some effective control strategies, are presented. Various kinds of contaminants may be generated by renovations, including volatile and semivolatile organic compounds, dusts and fibers (e.g.,…

  7. 77 FR 74472 - Application to Export Electric Energy; Energia Renovable S.C., LLC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-14

    ... Application to Export Electric Energy; Energia Renovable S.C., LLC AGENCY: Office of Electricity Delivery and Energy Reliability, DOE. ACTION: Notice of application. SUMMARY: Energia Renovable S.C., LLC (Energia... 402(f) of the Department of Energy Organization Act (42 U.S.C. 7151(b), 7172(f)) and...

  8. Motorcycle Repair.

    ERIC Educational Resources Information Center

    Hein, Jim; Bundy, Mike

    This motorcycle repair curriculum guide contains the following ten areas of study: brake systems, clutches, constant mesh transmissions, final drives, suspension, mechanical starting mechanisms, electrical systems, fuel systems, lubrication systems, and overhead camshafts. Each area consists of one or more units of instruction. Each instructional…

  9. Snowmobile Repair.

    ERIC Educational Resources Information Center

    Helbling, Wayne

    This guide is designed to provide and/or improve instruction for occupational training in the area of snowmobile repair, and includes eight areas. Each area consists of one or more units of instruction, with each instructional unit including some or all of the following basic components: Performance objectives, suggested activities for teacher and…

  10. Outboard Repair.

    ERIC Educational Resources Information Center

    Hardway, Jack

    This consortium-developed instructor's manual for small engine repair (with focus on outboard motors) consists of the following nine instructional units: electrical remote control assembly, mechanical remote control assembly, tilt assemblies, exhaust housing, propeller and trim tabs, cooling system, mechanical gearcase, electrical gearcase, and…

  11. Turbine repair process, repaired coating, and repaired turbine component

    DOEpatents

    Das, Rupak; Delvaux, John McConnell; Garcia-Crespo, Andres Jose

    2015-11-03

    A turbine repair process, a repaired coating, and a repaired turbine component are disclosed. The turbine repair process includes providing a turbine component having a higher-pressure region and a lower-pressure region, introducing particles into the higher-pressure region, and at least partially repairing an opening between the higher-pressure region and the lower-pressure region with at least one of the particles to form a repaired turbine component. The repaired coating includes a silicon material, a ceramic matrix composite material, and a repaired region having the silicon material deposited on and surrounded by the ceramic matrix composite material. The repaired turbine component a ceramic matrix composite layer and a repaired region having silicon material deposited on and surrounded by the ceramic matrix composite material.

  12. Early days of DNA repair: discovery of nucleotide excision repair and homology-dependent recombinational repair.

    PubMed

    Rupp, W Dean

    2013-12-13

    The discovery of nucleotide excision repair in 1964 showed that DNA could be repaired by a mechanism that removed the damaged section of a strand and replaced it accurately by using the remaining intact strand as the template. This result showed that DNA could be actively metabolized in a process that had no precedent. In 1968, experiments describing postreplication repair, a process dependent on homologous recombination, were reported. The authors of these papers were either at Yale University or had prior Yale connections. Here we recount some of the events leading to these discoveries and consider the impact on further research at Yale and elsewhere.

  13. U.S. EPA requires Southern California contractor to warn residents of lead-based paint dangers

    EPA Pesticide Factsheets

    SAN FRANCISCO - The U.S. Environmental Protection Agency recently fined G.D. Friend, Inc. (operating as Everlast Home Energy Solutions) $28,564 for failing to comply with the federal Renovation, Repair and Painting (RRP) Rule while performing renova

  14. Characteristics of Viewers of a Tennessee Agricultural Extension Educational Television Series on Renovating Furniture. A research Summary of a Graduate Study.

    ERIC Educational Resources Information Center

    Dixon, Lois Claudine; And Others

    A study was conducted to investigate certain characteristics of respondents who renovated furniture during a Washington County educational television 19-program series on chair renovation, who had previously renovated furniture, and who planned to renovate a chair following the series, and to compare them with those respondents who had not. Data…

  15. Home Renovation, Family History of Atopy, and Respiratory Symptoms and Asthma Among Children Living in China

    PubMed Central

    Dong, Guang-Hui; Wang, Jing; Trevathan, Edwin; Liu, Miao-Miao; Wang, Da; Ren, Wan-Hui; Chen, Weiqing; Simckes, Maayan; Zelicoff, Alan

    2014-01-01

    Objectives. To investigate the association of indoor air pollution with the respiratory health of children, we evaluated the associations of children’s respiratory symptoms with asthma and recent home renovation. Methods. We conducted a cross-sectional survey in a school recruitment sample of 31 049 children aged 2 to 14 years in 25 districts of 7 cities of northeast China in 2008–2009. The children’s parents completed standardized questionnaires characterizing the children’s histories of respiratory symptoms and illness, recent home renovation information, and other associated risk factors. Results. The effects of home renovation in the past 2 years were significantly associated with cough, phlegm, current wheeze, doctor-diagnosed asthma, and current asthma. The associations we computed when combining the status of home renovation and family history of atopy were higher than were those predicted from the combination of the separate effects. However, the interactions between home renovation and family history of atopy on a multiplicative scale were not statistically significant (P > .05). Conclusions. Home renovation is associated with increases in the prevalence of respiratory symptoms and asthma in children. The effects of different renovation materials on child respiratory health should be studied further. PMID:24228648

  16. Passive solar renovation of an existing commercial greenhouse

    SciTech Connect

    McGinnis, J.W.; Whitehead, N.

    1980-01-01

    The renovation of an existing 1800 square foot commercial greenhouse to incorporate passive solar reliant and energy conserving features is detailed. The Aquatic-Agriculture Institute for Research, a non-profit group, sponsored the project to develop efficient production methods to raise vegetables and fish at the community level. The performance of the remodeled greenhouse will be compared to the performance of the same greenhouse as it was originally designed. The restored greenhouse began operation in September 1979. Accurate fuel and temperature records maintained through-out the past winter, show the cost of back-up heating under operating conditions to be approximately $150.00. Old fuel receipts dating back into the 1940's show an average use of 2000 gallons of heating fuel each winter prior to remodeling. This would indicate a yearly fuel savings of better than 90% through the use of passive solar techniques.

  17. Field turbidity method for the determination of lead in acid extracts of dried paint.

    PubMed

    Studabaker, William B; McCombs, Michelle; Sorrell, Kristen; Salmons, Cynthia; Brown, G Gordon; Binstock, David; Gutknecht, William F; Harper, Sharon L

    2010-07-08

    Lead, which can be found in old paint, soil, and dust, has been clearly shown to have adverse health effects on the neurological systems of both children and adults. As part of an ongoing effort to reduce childhood lead poisoning, the US Environmental Protection Agency promulgated the Lead Renovation, Repair, and Painting Program (RRP) rule requiring that paint in target housing built prior to 1978 be tested for lead before any renovation, repair, or painting activities are initiated. This rule has led to a need for a rapid, relatively easy, and an inexpensive method for measuring lead in paint. This paper presents a new method for measuring lead extracted from paint that is based on turbidimetry. This method is applicable to paint that has been collected from a surface and extracted into 25% (v/v) of nitric acid. An aliquot of the filtered extract is mixed with an aliquot of solid potassium molybdate in 1 M ammonium acetate to form a turbid suspension of lead molybdate. The lead concentration is determined using a portable turbidity meter. This turbidimetric method has a response of approximately 0.9 NTU per microg lead per mL extract, with a range of 1-1000 Nephelometric Turbidity Units (NTUs). Precision at a concentration corresponding to the EPA-mandated decision point of 1 mg of lead per cm(2) is <2%. This method is insensitive to the presence of other metals common to paint, including Ba(2+), Ca(2+), Mg(2+), Fe(3+), Co(2+), Cu(2+), and Cd(2+), at concentrations of 10 mg mL(-1) or to Zn(2+) at 50 mg mL(-1). Analysis of 14 samples from six reference materials with lead concentrations near 1 mg cm(-2) yielded a correlation to inductively coupled plasma-atomic emission spectroscopy (ICP-AES) analysis of 0.97, with an average bias of 2.8%. Twenty-four sets of either 6 or 10 paint samples each were collected from different locations in old houses, a hospital, tobacco factory, and power station. Half of each set was analyzed using rotor/stator-25% (v/v) nitric acid

  18. How To Get What You Want When Working on a Renovation Project.

    ERIC Educational Resources Information Center

    Roark, Steven

    2002-01-01

    Describes how leaders and instructors in the Art Department of Longview Community College in Kansas City, Missouri, found a solution to incorporating a desired renovation feature (a sink in the ceramics and clay studio) within budget constraints. (EV)

  19. Review of fungal outbreaks and infection prevention in healthcare settings during construction and renovation.

    PubMed

    Kanamori, Hajime; Rutala, William A; Sickbert-Bennett, Emily E; Weber, David J

    2015-08-01

    Hospital construction and renovation activities are an ever-constant phenomenon in healthcare facilities, causing dust contamination and possible dispersal of fungal spores. We reviewed fungal outbreaks that occurred during construction and renovation over the last 4 decades as well as current infection prevention strategies and control measures. Fungal outbreaks still occur in healthcare settings, especially among patients with hematological malignancies and those who are immunocompromised. The causative pathogens of these outbreaks were usually Aspergillus species, but Zygomycetes and other fungi were occasionally reported. Aspergillus most commonly caused pulmonary infection. The overall mortality of construction/renovation-associated fungal infection was approximately 50%. The minimal concentration of fungal spores by air sampling for acquisition of fungal infections remains to be determined. Performing infection control risk assessments and implementing the recommended control measures is essential to prevent healthcare-associated fungal outbreaks during construction and renovation.

  20. Treatment of CHP in LEED® for Building Design and Construction: New Construction and Major Renovations

    EPA Pesticide Factsheets

    This factsheet introduces CHP and its benefits to architects and engineers, and summarizes how CHP is treated under the LEED® for Building Design and Construction: New Construction and Major Renovations (LEED BD+C: New Construction) rating system.

  1. 45 CFR 1309.11 - Cost comparison for purchase, construction and major renovation of facilities.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... be supported, whenever possible, by a written statement from a licensed real estate professional in... receive major renovation, made by a professional appraiser, must be included. (c)(1) Grantees proposing...

  2. 45 CFR 1309.10 - Applications for the purchase, construction and major renovation of facilities.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... facility to be acquired, including information on the size and type of structure, the number and a... to acquisition or major renovation of facility and the repayment plans (detailing balloon payments...

  3. Jicarilla Apache Tribe: greenhouse renovation and demonstration project. Final technical report

    SciTech Connect

    Martinez, L. Jr.

    1980-09-30

    This report describes briefly the construction phase, instructional phase, bedding plant phase, and tomato production phase of a passive solar greenhouse renovation and demonstration project. Some data on the performance and heat savings are included.

  4. Brain aneurysm repair

    MedlinePlus

    ... aneurysm repair; Dissecting aneurysm repair; Endovascular aneurysm repair - brain; Subarachnoid hemorrhage - aneurysm ... Your scalp, skull, and the coverings of the brain are opened. A metal clip is placed at ...

  5. Eye muscle repair - discharge

    MedlinePlus

    ... Lazy eye repair - discharge; Strabismus repair - discharge; Extraocular muscle surgery - discharge ... You or your child had eye muscle repair surgery to correct eye muscle ... term for crossed eyes is strabismus. Children most often ...

  6. Lead exposure among lead-acid battery workers in Jamaica.

    PubMed

    Matte, T D; Figueroa, J P; Burr, G; Flesch, J P; Keenlyside, R A; Baker, E L

    1989-01-01

    To assess lead exposure in the Jamaican lead-acid battery industry, we surveyed three battery manufacturers (including 46 production workers) and 10 battery repair shops (including 23 battery repair workers). Engineering controls and respiratory protection were judged to be inadequate at battery manufacturers and battery repair shops. At manufacturers, 38 of 42 air samples for lead exceeded a work-shift time-weighted average concentration of 0.050 mg/m3 (range 0.030-5.3 mg/m3), and nine samples exceeded 0.50 mg/m3. Only one of seven air samples at repair shops exceeded 0.050 mg/m3 (range 0.003-0.066 mg/m3). Repair shop workers, however, had higher blood lead levels than manufacturing workers (65% vs. 28% with blood lead levels above 60 micrograms/dl, respectively). Manufacturing workers had a higher prevalence of safe hygienic practices and a recent interval of minimal production had occurred at one of the battery manufacturers. Workers with blood lead levels above 60 micrograms/dl tended to have higher prevalences of most symptoms of lead toxicity than did workers with lower blood lead levels, but this finding was not consistent or statistically significant. The relationship between zinc protoporphyrin concentrations and increasing blood lead concentrations was consistent with that described among workers in developed countries. The high risk of lead toxicity among Jamaican battery workers is consistent with studies of battery workers in other developing countries.

  7. Aspinall Courthouse: GSA's Historic Preservation and Net-Zero Renovation Case Study

    SciTech Connect

    Chang, R.; Hayter, S.; Hotchkiss, E.; Pless, S.; Sielcken, J.; Smith-Larney, C.

    2014-10-01

    The federal government is mandated with improving efficiency of buildings, incorporating renewable energy, and achieving net-zero energy operations where possible. These challenges led GSA to consider aligning historic preservation renovations with net-zero energy goals. The Wayne N. Aspinall Federal Building and U.S. Courthouse (Aspinall Courthouse), in Grand Junction, Colorado, is an example of a renovation project that aimed to accomplish both historic preservation and net-zero energy goals.

  8. Leveraging Limited Scope for Maximum Benefit in Occupied Renovation of Uninsulated Cold Climate Multifamily Housing

    SciTech Connect

    Neuhauser, K.; Bergey, D.; Osser, R.

    2012-03-01

    This project examines a large-scale renovation project within a 500 unit, 1960's era subsidized urban housing community. This research focuses on the airflow control and window replacement measures implemented as part of the renovations to the low-rise apartment buildings. The window replacement reduced the nominal conductive loss of the apartment enclosure by approximately 15%; air sealing measures reduced measured air leakage by approximately 40% on average.

  9. INTERNAL REPAIR OF PIPELINES

    SciTech Connect

    Robin Gordon; Bill Bruce; Nancy Porter; Mike Sullivan; Chris Neary

    2003-05-01

    The two broad categories of deposited weld metal repair and fiber-reinforced composite repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repairs and for fiber-reinforced composite repair. To date, all of the experimental work pertaining to the evaluation of potential repair methods has focused on fiber-reinforced composite repairs. Hydrostatic testing was also conducted on four pipeline sections with simulated corrosion damage: two with composite liners and two without.

  10. Mismatch repair.

    PubMed

    Fishel, Richard

    2015-10-30

    Highly conserved MutS homologs (MSH) and MutL homologs (MLH/PMS) are the fundamental components of mismatch repair (MMR). After decades of debate, it appears clear that the MSH proteins initiate MMR by recognizing a mismatch and forming multiple extremely stable ATP-bound sliding clamps that diffuse without hydrolysis along the adjacent DNA. The function(s) of MLH/PMS proteins is less clear, although they too bind ATP and are targeted to MMR by MSH sliding clamps. Structural analysis combined with recent real-time single molecule and cellular imaging technologies are providing new and detailed insight into the thermal-driven motions that animate the complete MMR mechanism.

  11. Evaluation of cleaning methods applied in home environments after renovation and remodeling activities.

    PubMed

    Yiin, Lih-Ming; Lu, Shou-En; Sannoh, Sulaiman; Lim, Benjamin S; Rhoads, George G

    2004-10-01

    We conducted a cleaning trial in 40 northern New Jersey homes where home renovation and remodeling (R&R) activities were undertaken. Two cleaning protocols were used in the study: a specific method recommended by the US Department of Housing and Urban Development (HUD), in the 1995 "Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing," using a high-efficiency particulate air (HEPA)-filtered vacuum cleaner and a tri-sodium phosphate solution (TSP); and an alternative method using a household vacuum cleaner and a household detergent. Eligible homes were built before the 1970s with potential lead-based paint and had recent R&R activities without thorough cleaning. The two cleaning protocols were randomly assigned to the participants' homes and followed the HUD-recommended three-step procedure: vacuuming, wet washing, and repeat vacuuming. Wipe sampling was conducted on floor surfaces or windowsills before and after cleaning to evaluate the efficacy. All floor and windowsill data indicated that both methods (TSP/HEPA and non-TSP/non-HEPA) were effective in reducing lead loading on the surfaces (P < 0.001). When cleaning was applied to surfaces with initial lead loading above the clearance standards, the reductions were even greater, above 95% for either cleaning method. The mixed-effect model analysis showed no significant difference between the two methods. Baseline lead loading was found to be associated with lead loading reduction significantly on floors (P < 0.001) and marginally on windowsills (P = 0.077). Such relations were different between the two cleaning methods significantly on floors (P < 0.001) and marginally on windowsills (P = 0.066), with the TSP/HEPA method being favored for higher baseline levels and the non-TSP/non-HEPA method for lower baseline levels. For the 10 homes with lead abatement, almost all post-cleaning lead loadings were below the standards using either cleaning method. Based on our results, we recommend

  12. Renovation of a pear orchard site with sludge compost

    SciTech Connect

    Korcak, R.F.

    1986-01-01

    A lime-stabilized sewage sludge compost was used as a surface amendment to improve the soil and nutritional status of a number of established pear cultivars grown on an acidic, low fertility soil site. Leaf Ca status was significantly increased while trace metals were not elevated and in most cases decreased by sludge compost over the course of the study. Soil chemical properties were modified in a manner similar to liming. Addition of sludge composts, particularly low metal containing materials, appears to represent an acceptable aid in renovating established pear orchards located on poor soil sites. Leaf, fruit flesh or peel Cd were not significantly effected by the compost addition. The compost added twice the recommended level of available N the first year and sub-optimum N the following two years. Leaf N, although significantly increased in the composted versus non-composted controls, was below sufficiency levels by the third year after addition. This indicates that compost cannot fully supply required N from a one time application even over the short term.

  13. Book Repair Manual.

    ERIC Educational Resources Information Center

    Milevski, Robert J.

    1995-01-01

    This book repair manual developed for the Illinois Cooperative Conservation Program includes book structure and book problems, book repair procedures for 4 specific problems, a description of adhesive bindings, a glossary, an annotated list of 11 additional readings, book repair supplies and suppliers, and specifications for book repair kits. (LRW)

  14. Results of arthroscopic meniscal repair

    PubMed Central

    Orlowski, María Belén; Arroquy, Damián; Chahla, Jorge; Guiñazú, Jorge; Bisso, Martín Carboni; Vilaseca, Tomás

    2017-01-01

    Objectives: Currently the arthroscopic treatment of meniscal pathology has become one of the most common procedures in orthopedic practice and although in most cases meniscectomy is done, meniscal sutures are the treatment of choice when a reparable lesion is diagnosed, especially in young patients. It has been reported that the meniscal repair leads to a lower incidence of developing degenerative changes in the long-term when compared with meniscectomy and nonsurgical treatment of meniscal injuries. The aim of this study was to determine the success rate of meniscal repair achieved in our sports medicine practice. Methods: Between 2006 and 2015, 62 meniscal tears in 58 patients with a mean age of 31 years (range 15-58) were repaired. Mean follow-up was 52 months (range 6-120 months). In 16 patients (28%) was associated with arthroscopic ACL reconstruction. The repair techniques used included outside-in sutures, inside-out sutures, all-inside sutures and a combination of techniques. Failure of the repair was defined by the requirement for repeat knee arthroscopy and partial or subtotal meniscectomy. The indication of arthroscopic revision was based on the presence of mechanical symptoms, after the suture. Results: Failure of meniscus repair occurred in four patients (failure rate: 6.45%), one case was associated with ACL reconstruction (failure rate: 6.25%) and 3 had undergone isolated meniscal suture (failure rate: 8%). The average time for the reoperation was 15 months (4-24). We had no intraoperative complications. Conclusion: The reported failure rate of meniscal repair in stable knees varies between 12% and 43%, with reports that demonstrate a clinical success rate of 100%. In this study, we obtained a success rate of 93.5%. These results are slightly higher than those in the literature, which can be attributed to careful selection of patients and the fact that clinical success tends to be better than the assessed arthroscopically. In summary, we consider the

  15. Effects of full-scale beach renovation on fecal indicator levels in shoreline sand and water.

    PubMed

    Hernandez, Rafael J; Hernandez, Yasiel; Jimenez, Nasly H; Piggot, Alan M; Klaus, James S; Feng, Zhixuan; Reniers, Ad; Solo-Gabriele, Helena M

    2014-01-01

    Recolonization of enterococci, at a non-point source beach known to contain high background levels of bacteria, was studied after a full-scale beach renovation project. The renovation involved importation of new exogenous sand, in addition to infrastructure improvements. The study's objectives were to document changes in sand and water quality and to evaluate the relative contribution of different renovation activities towards these changes. These objectives were addressed: by measuring enterococci levels in the sand and fecal indicator bacteria levels (enterococci and fecal coliform) in the water, by documenting sediment characteristics (mineralogy and biofilm levels), and by estimating changes in observable enterococci loads. Analysis of enterococci levels on surface sand and within sediment depth cores were significantly higher prior to beach renovation (6.3-72 CFU/g for each sampling day) when compared to levels during and after beach renovation (0.8-12 CFU/g) (P < 0.01). During the renovation process, sand enterococci levels were frequently below detection limits (<0.1 CFU/g). For water, exceedances in the regulatory thresholds that would trigger a beach advisory decreased by 40% for enterococci and by 90% for fecal coliform. Factors that did not change significantly between pre- and post- renovation included the enterococci loads from animals (approx. 3 × 10(11) CFU per month). Factors that were observed to change between pre- and post- renovation activities included: the composition of the beach sand (64% versus 98% quartz, and a significant decrease in biofilm levels) and loads from direct stormwater inputs (reduction of 3 × 10(11) CFU per month). Overall, this study supports that beach renovation activities contributed to improved sand and water quality resulting in a 50% decrease of observable enterococci loads due to upgrades to the stormwater infrastructure. Of interest was that the change in the sand mineralogy also coincided with changes in biofilm

  16. Effects of Full-Scale Beach Renovation on Fecal Indicator Levels in Shoreline Sand and Water

    PubMed Central

    Hernandez, Rafael J.; Hernandez, Yasiel; Jimenez, Nasly H.; Piggot, Alan M.; Klaus, James S.; Feng, Zhixuan; Reniers, Ad; Solo-Gabriele, Helena M.

    2013-01-01

    Recolonization of enterococci, at a non-point source beach known to contain high background levels of bacteria, was studied after a full-scale beach renovation project. The renovation involved importation of new exogenous sand, in addition to infrastructure improvements. The study's objectives were to document changes in sand and water quality and to evaluate the relative contribution of different renovation activities towards these changes. These objectives were addressed: by measuring enterococci levels in the sand and fecal indicator bacteria levels (enterococci and fecal coliform) in the water, by documenting sediment characteristics (mineralogy and biofilm levels), and by estimating changes in observable enterococci loads. Analysis of enterococci levels on surface sand and within sediment depth cores were significantly higher prior to beach renovation (6.3 to 72 CFU/g for each sampling day) when compared to levels during and after beach renovation (0.8 CFU/g to 12 CFU/g) (p<0.01). During the renovation process, sand enterococci levels were frequently below detection limits (<0.1 CFU/g). For water, exceedances in the regulatory thresholds that would trigger a beach advisory decreased by 40% for enterococci and by 90% for fecal coliform. Factors that did not change significantly between pre- and post- renovation included the enterococci loads from animals (approx. 3 × 1011 CFU per month). Factors that were observed to change between pre- and post- renovation activities included: the composition of the beach sand (64% versus 98% quartz, and a significant decrease in biofilm levels) and loads from direct stormwater inputs (reduction of 3 × 1011 CFU per month). Overall, this study supports that beach renovation activities contributed to improved sand and water quality resulting in a 50% decrease of observable enterococci loads due to upgrades to the stormwater infrastructure. Of interest was that the change in the sand mineralogy also coincided with changes in

  17. Carbon balance of renovated grasslands: input- or output-driven?

    NASA Astrophysics Data System (ADS)

    Choncubhair, Órlaith Ní; Osborne, Bruce; Lanigan, Gary

    2015-04-01

    Temperate grasslands constitute over 30% of the Earth's naturally-occurring biomes and make an important contribution towards the partial mitigation of anthropogenic greenhouse gas emissions by terrestrial ecosystems. In permanent temperate grasslands, biomass production and sward quality can deteriorate over time and periodic renovation activities, involving soil tillage and reseeding, are commonly carried out to halt this decline. Long-term cultivation of agricultural land has been associated with soil aggregate degradation and reduced soil carbon storage. However, the impact of these single tillage disturbances on C cycling in grasslands is less clear. This study evaluated gaseous and dissolved organic carbon (DOC) losses following a single tillage event by subjecting grassland lysimeters with contrasting soil drainage characteristics to simulated conventional inversion or minimum tillage. Field-scale CO2 emissions after conventional tillage were also quantified and empirically modelled over short- and medium-term timeframes to delineate the ecosystem response to environmental variables. Soil moisture was the limiting determinant of ecosystem carbon release following conventional tillage. Freshly-tilled soils were associated with reduced water retention and increased sensitivity to soil moisture, which was particularly pronounced following rewetting events. Significantly elevated but ephemeral CO2 effluxes were detected in the hours following inversion ploughing, however tillage disturbance did not generate significantly enhanced C emission rates in the medium term. Equally, DOC losses were not significantly amplified by conventional tillage compared with conservative minimum tillage and were predominantly controlled by soil drainage across tillage regimes. Our results suggest that a net ecosystem source of 120 to 210 g C m-2 over an approximately two-month period was most likely a consequence of reduced productivity and C input rather than enhanced soil CO2

  18. Rapid road repair vehicle

    DOEpatents

    Mara, Leo M.

    1998-01-01

    Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find an the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was was heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past.

  19. Rapid road repair vehicle

    DOEpatents

    Mara, L.M.

    1998-05-05

    Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find at the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was not heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past. 2 figs.

  20. Repair Development for a Composite Cryotank

    NASA Technical Reports Server (NTRS)

    Cox, Sarah B.; Danley, Susan E.; Caraccio, Anne J.; Cheshire, Brian C.; Sampson, Jeffrey W.; Taylor, Brian J.

    2014-01-01

    The Composite Cryotank Technologies and Demonstration Project is working to advance the technologies for composite cryogenic propellant tanks at diameters suitable for future heavy lift vehicles and other in-space applications. The main goals of the project are to reduce weight and cost. One aspect of this project has focused on damage evaluation and repair development. Test panels have been impacted, repaired, and tested. Several repair methods were used to compare their effectiveness at restoring the integrity of the composite. Panels were evaluated by nondestructive evaluations at several points during the process to assess the damage and repair. The testing performed and the results and conclusions from the nondestructive evaluations and the destructive testing will be discussed. These results will lead to further development of inspection techniques and repair methods.

  1. Oxidatively induced DNA damage and its repair in cancer.

    PubMed

    Dizdaroglu, Miral

    2015-01-01

    Oxidatively induced DNA damage is caused in living organisms by endogenous and exogenous reactive species. DNA lesions resulting from this type of damage are mutagenic and cytotoxic and, if not repaired, can cause genetic instability that may lead to disease processes including carcinogenesis. Living organisms possess DNA repair mechanisms that include a variety of pathways to repair multiple DNA lesions. Mutations and polymorphisms also occur in DNA repair genes adversely affecting DNA repair systems. Cancer tissues overexpress DNA repair proteins and thus develop greater DNA repair capacity than normal tissues. Increased DNA repair in tumors that removes DNA lesions before they become toxic is a major mechanism for development of resistance to therapy, affecting patient survival. Accumulated evidence suggests that DNA repair capacity may be a predictive biomarker for patient response to therapy. Thus, knowledge of DNA protein expressions in normal and cancerous tissues may help predict and guide development of treatments and yield the best therapeutic response. DNA repair proteins constitute targets for inhibitors to overcome the resistance of tumors to therapy. Inhibitors of DNA repair for combination therapy or as single agents for monotherapy may help selectively kill tumors, potentially leading to personalized therapy. Numerous inhibitors have been developed and are being tested in clinical trials. The efficacy of some inhibitors in therapy has been demonstrated in patients. Further development of inhibitors of DNA repair proteins is globally underway to help eradicate cancer.

  2. Aalto University Undergraduate Centre. Protected Alvar Aalto Building Awarded for Accessibility After Renovation.

    PubMed

    Raike, Antti; Ahlava, Antti; Tuomi, Teemu; Skyttä, Pauliina; Verma, Ira

    2016-01-01

    The main building of the former Helsinki University of Technology (TKK) designed by Alvar Aalto is part of the cultural heritage in Finland. The building underwent a major renovation in 2011-2015 and has now become an awarded Undergraduate Centre for the modern interdisciplinary education of Aalto University. This paper presents how the architectural masterpiece from the 1960's was renovated and updated into a modern and accessible university building. Particular attention was paid for entering the building by wheelchairs, prams and pushchairs. The successful renovation was awarded in 2015 by the 'Esteetön Suomi -palkinto' (Accessible Finland Award), given every two years as a mark of recognition to activities or locations implementing the principles of accessibility and Universal Design for all on a broad scale and in a nationally significant way.

  3. Proposal for Determing the Scale of Renovation Needs of Residential Buildings

    NASA Astrophysics Data System (ADS)

    Nowogońska, Beata

    2016-09-01

    The scope of renovation works depends, above all. on the state in which a historical site has been preserved. All actions ought to be preceded by an assessment of the technical condition of the buildings. The article presents a method for determining the scale of needs for renovating existing buildings constructed in traditional technology. The established planning decision criteria, determined by measures of decision criteria and the weights of these criteria comprise output data for establishing a matrix of indicators for the order in which works ought to be carried out. Results of using it on inhabited residential buildings located in Gorzów Wielkopolski have also been presented.

  4. Prototype wash water renovation system integration with government-furnished wash fixture

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The requirements of a significant quantity of proposed life sciences experiments in Shuttle payloads for available wash water to support cleansing operations has provided the incentive to develop a technique for wash water renovation. A prototype wash water waste renovation system which has the capability to process the waste water and return it to a state adequate for reuse in a typical cleansing fixture designed to support life science experiments was investigated. The resulting technology is to support other developments efforts pertaining to water reclamation by serving as a pretreatment step for subsequent reclamation procedures.

  5. Recommendations for renovating an operating theater at an emergency obstetric care facility.

    PubMed

    Abreu, E; Potter, D

    2001-12-01

    The importance of emergency obstetric care (EmOC) in reducing maternal mortality has focused attention on both the skills of the clinicians to provide high quality care and on the health facilities in which the care is provided. Essential elements of EmOC include the capacity to perform cesarean sections for which an operating theater is needed. This article focuses on renovation of existing operating theaters to meet the necessary standards. While building, adding to, or renovating operating theaters can be expensive, this article emphasizes appropriate materials that are likely to be locally available and relatively inexpensive. The importance of proper maintenance is discussed.

  6. Trusses Of Tensegrity Type In A Concept Of Train Station Renovation In Żary

    NASA Astrophysics Data System (ADS)

    Lechocka, Paulina

    2015-09-01

    The first railway station in Żary was built in 1843 in Germany. After the Second World War and years of socialism in Poland the meaning of railway decreased and its technical condition deteriorated. Now the building needs renovation and change of function. Tensegrity structures may be useful in renovation of platforms shelter. They are strut and tie construction, in which there is self-stabilization between compressed and tensioned elements. Conception of new platform shelter is based on exemplary tensegrity module consist of three struts and nine cables (called "Simplex"). Tensegrity would make railway station more modern, but not cover its original elevation.

  7. TPS Inspection and Repair

    NASA Technical Reports Server (NTRS)

    Parazynski, Scott

    2012-01-01

    Dr. Scott Parazynski provided a retrospective on the EVA tools and procedures efforts NASA went through in the aftermath of Columbia for the Shuttle Thermal Protection System (TPS) inspection and repair. He describes his role as the lead astronaut on this effort, and covered all of the Neutral Buoyancy Lab (NBL), KC 135 (reduced gravity aircraft), Precision Air Bearing Floor (PABF), vacuum chamber and 1 G testing that was done in order to develop the tools and techniques that were flown. Parazynski also discusses how the EVA community worked together to resolve a huge safety issue, and how his work in the spacesuit was critical to overcoming a design limitation of the Space Shuttle.

  8. Inguinal hernia repair

    MedlinePlus

    ... This repair can be done with open or laparoscopic surgery. You and your surgeon can discuss which type ... the repair, the cuts are stitched closed. In laparoscopic surgery: The surgeon makes three to five small cuts ...

  9. Laparoscopic Inguinal Hernia Repair

    MedlinePlus

    ... Some hernia repairs are performed using a small telescope known as a laparoscope. If your surgeon has ... in the abdominal wall (muscle) using small incisions, telescopes and a patch (mesh). Laparoscopic repair offers a ...

  10. Collision Repair Campaign

    EPA Pesticide Factsheets

    The Collision Repair Campaign targets meaningful risk reduction in the Collision Repair source category to reduce air toxic emissions in their communities. The Campaign also helps shops to work towards early compliance with the Auto Body Rule.

  11. Technique renovation of the Grad-Shafranov (GS) reconstruction

    NASA Astrophysics Data System (ADS)

    Li, Huijun; Feng, Xueshang

    Grad-Shafranov (GS) reconstruction is now a novel tool in observational study on the flux rope events in solar winds and in magnetospheric plasmas. Meanwhile, mathematic flaws constraint its further application in structure recovery with the spacecraft data. In this talk, we report some new results in an ambition of the technique renovation of the GS reconstructions. (1) A pair of Hilbert transforms is proofed existing there on the boundary of any 2-dimensional potential field, and the essential technique of GS reconstruction is reformulated into the inverse boundary value problems (IBVPs) for Laplace’s equation. (2) The famous problem, i.e. the ill-posedness of the IBVPs, is also solved with the help of the introduced Hilbert transforms: It’s proofed that the specified IBVPs have unique solution, given the known Dirichlet and Neumann conditions on the partial boundary. Even when the known boundary is reduced to only one point, it can be inferred logically that the unique solution still exists there on the remaining boundary. (3) According to linearity of the elliptic operator in GS equation, its solution can be divided into two parts. One is solved from a semi-linear elliptic equation with an homogeneous Dirichlet boundary condition. The other is solved from the IBVP of Laplace’s equation. It is concluded that there exists a unique solution for the so-called elliptic Cauchy problem for the essential technique of GS reconstruction. (4) The new solution approach is also developed with the introduced Hilbert transforms, and an iterated Tikhonov regularization scheme is applied to deal with the ill-posed linear operators appearing in the discretization of the new approach. The special case on the circular boundary is benchmarked with the analytic solutions. Numerical experiments highlight the efficiency and robustness of the proposed method. (5) After a conformal mapping procedure, the new solution approach has also been extended from the circle boundary to any

  12. Inflammation and repair processes in chronic obstructive pulmonary disease.

    PubMed

    Rennard, S I

    1999-11-01

    COPD is characterized by chronic inflammation and injury of both the airways and the parenchymal structures of the lung. These processes are associated with ongoing repair. Whether repair leads to restoration of normal tissue architecture or to altered tissue structure with loss of function depends on complex interrelationships of a variety of interacting mediators. The possibility that repair processes can be modulated by exogenous agents raises the possibility that therapeutic strategies aimed at repair can be effective. Such strategies offer tremendous promise both for slowing the relentlessly progressive natural history which most often characterizes COPD and, possibly, for restoring lung function. Rennard SI. Inflammation and repair processes in chronic obstructive pulmonary disease.

  13. LEADING WITH LEADING INDICATORS

    SciTech Connect

    PREVETTE, S.S.

    2005-01-27

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites.

  14. 45 CFR 1309.11 - Cost comparison for purchase, construction and major renovation of facilities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... facility must submit a detailed estimate of the costs of the proposed activity and compare the costs of the... purchase a facility, without requesting funds for major renovations to the facility, must compare costs of... continue purchase of a facility, the cost of the present facility must be compared to the cost of...

  15. Earthworm populations in septic system filter fields and potential effects on wastewater renovation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Wastewater renovation in septic-system filter fields can be affected by preferential flow through soil macropores. Earthworm burrows may contribute to this concern by penetrating the infiltrative surface of soil-treatment trenches. Additionally, the moist, nutrient-rich environment surrounding tre...

  16. Energia Renovable para Centros de Salud Rurales (Renewable Energy for Rural Health Clinics)

    SciTech Connect

    Jimenez, T.; Olson, K.

    1999-07-28

    Esta es la primera de una serie de guias de aplicaciones que el Programa de Energia de Villas de NREL esta comisionando para acoplar sistemas comerciales renovables con aplicaciones rurales, incluyendo agua, escuelas rurales y micro empresas. La guia esta complementada por las actividades de desarrollo del Programa de Energia de Villas de NREL, proyectos pilotos internacionales y programas de visitas profesionales.

  17. Effects of pasture renovation on hydrology, nutrient runoff, and forage yield

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Proper pasture management is important in promoting optimal forage growth and reducing runoff and nutrient loss. Pasture renovation was performed prior to manure application (poultry litter or swine slurry) on different pasture soils and rainfall simulations were conducted to identify the effects o...

  18. Building a New Library or Renovating an Old: Some Things To Consider.

    ERIC Educational Resources Information Center

    McCabe, Gerard B.

    This article provides suggestions for librarians who are planning for the construction of new library buildings or the renovation or conversion of older buildings. The recommendations are based on practical experience gained by a Director of University Libraries in the planning and construction of Tompkins-McCaw and James Branch Cabell Libraries…

  19. [History of the renovation of the hôtel-Dieu of Bourges].

    PubMed

    Gitton, Philippe

    2006-01-01

    From the 16th to the 20th century "hôtel-Dieu" was the main hospital in the Berry capital. In the 30's the mayor decided to renovate the building but in 1994 the construction of a new hospital--"Centre Hospitalier Jacques-Coeur"--freed the ancient building which became a historical centre for culture et tourism in the region.

  20. 45 CFR 1309.10 - Applications for the purchase, construction and major renovation of facilities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 4 2014-10-01 2014-10-01 false Applications for the purchase, construction and... RENOVATION AND CONSTRUCTION Application Procedures § 1309.10 Applications for the purchase, construction and... grantee's ability to collaborate with other child care, early education programs, social services...

  1. Renovating Alzheimer's: "Constructive" Reflections on the New Clinical and Research Diagnostic Guidelines

    ERIC Educational Resources Information Center

    George, Daniel R.; Qualls, Sara H.; Camp, Cameron J.; Whitehouse, Peter J.

    2013-01-01

    The development of disease concepts for conditions such as Alzheimer's disease (AD) is an ongoing social process that evolves over time. The biomedical paradigm about AD that has informed our culture's understanding of brain aging for the past several decades is currently undergoing a major and timely renovation in the early 21st century. This…

  2. 76 FR 8395 - Issuance of a Presidential Permit Authorizing the Expansion, Renovation, Operation, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-14

    ... Commercial and Pedestrian Border Crossing Called ``Nogales-Mariposa'' in the Vicinity of Nogales, AZ, at the... expand, renovate, operate, and maintain the commercial and pedestrian border crossing called ``Nogales... Executive Order 11423, as amended. FOR FURTHER INFORMATION CONTACT: Stewart Tuttle, U.S.-Mexico...

  3. Digital Renovation of the Geologic Map of the Near Side of the Moon

    NASA Astrophysics Data System (ADS)

    Fortezzo, C. M.; Hare, T. M.

    2011-03-01

    We have digitally renovated the 1971 Wilhelms and MacCauley lunar near side geologic map. The digital version is in simple cylindrical with the geology and contact locations updated based on the Lunar Orbiter mosaic and a preliminary Kaguya DEM.

  4. Construction Know-How: Making the Best Possible Decisions Regarding School Construction and Renovation Projects.

    ERIC Educational Resources Information Center

    Argon, Joe, Ed.; Spoor, Dana L.; Cox, Susan M.; Brown, Andrew; Ray, Jennifer

    1998-01-01

    Presents a series of articles that examine decision making in school construction and renovation projects. Topics include preparing for a construction project, purchasing windows that provide protection at a reasonable cost, choosing the best flooring and carpeting, and dealing with deregulation. An industry roundtable discussion on project…

  5. School Renovation and the Importance of Maintenance. [Interview with Charles Boney, Jr.].

    ERIC Educational Resources Information Center

    Butterfield, Eric

    Charles Boney, Jr., Director of Boney Architects, offers his views on school districts that build schools that have to be replaced too soon, general problems concerning renovation of older buildings, and keeping maintenance costs down. He discusses the types of flooring materials school districts should consider using to lower maintenance costs…

  6. Maryland Public School Standards for Information and Communications Distribution Systems in New Construction and Renovation Projects.

    ERIC Educational Resources Information Center

    Maryland State Dept. of Education, Baltimore.

    Standards established by Maryland public schools for information and communication distribution systems in new construction and renovation projects are detailed. The function of the communications distribution room (CDR) is to house the distribution equipment of the school's communications systems and may contain gateways, tuners, video cassette…

  7. Some Effects of School Building Renovation on Pupil Attitudes and Behavior in Selected Junior High Schools.

    ERIC Educational Resources Information Center

    Cramer, Robert Joseph

    A study of 2,300 junior high school students from three schools determined the effect of a newly renovated school, a new school environment, and an old dilapidated school environment on their attitudes and behavior. Points were assigned to their answers; high scores indicated a positive attitude. Results show attitudes were lowest in the old…

  8. Alternate Project Delivery Methods: New Ways to Build and Renovate School Facilities.

    ERIC Educational Resources Information Center

    Aller, Gary

    2002-01-01

    Describes potential benefits of four alternative project-delivery methods for school construction, renovation, and maintenance: construction manager-at-risk (CMAR), design-build (DB), design-bid-build (DBB), and job-order contracting (JOC). Compares CMAR, DBB, and DB for construction cost, schedule, and quality. (PKP)

  9. Assessment of Flooring Renovations on African Elephant (Loxodonta africana) Behavior and Glucocorticoid Response

    PubMed Central

    Boyle, Sarah A.; Roberts, Beth; Pope, Brittany M.; Blake, Margaret R.; Leavelle, Stephen E.; Marshall, Jennifer J.; Smith, Andrew; Hadicke, Amanda; Falcone, Josephine F.; Knott, Katrina; Kouba, Andrew J.

    2015-01-01

    Captive African (Loxodonta africana) and Asian (Elephas maximus) elephants can experience foot pathologies and arthritis. As a preventative measure against these pathologies and to alleviate the potential discomfort due to concrete substrates, some zoological institutions have renovated elephant housing to increase the amount of natural or shock-absorbent substrates. The objective of this study was to compare behavioral (diurnal and nocturnal) and glucorticoid (e.g., serum cortisol) responses of three female African elephants before, during, and after renovation to their indoor housing floor to assess whether renovations had short-term effects on the elephants’ behavior and stress physiology. Behavioral data were collected using scan-sampling methods, and activity budgets were constructed for each of the three elephants. In addition, the duration of all lying rest activities were recorded. Weekly serum cortisol concentrations were determined with enzyme immunoassay (EIA). Overall, eating was the most prevalent behavior exhibited outdoors during the day, while resting (either in a lying or standing position) were most common during the indoor, nocturnal periods. Although variation existed among the three elephants, all three females spent significantly more time walking and less time eating during the day after the completion of the renovations. The extent to which the three elephants exhibited nocturnal lying rest behavior varied among the elephants, with the oldest elephant exhibiting the least amount (an average of 13.2 ± 2.8% of the nightly behavioral scans) compared to the two younger elephants (an average of 34.5 ± 2.1% and 56.6 ± 2.8% of the nightly behavioral scans). There was a significant increase in lying rest behavior for one elephant and standing rest for a second elephant following renovations. Baseline cortisol concentrations prior to renovations were 3.0 ± 0.4 ng/ml, 4.5 ± 0.5 ng/ml, and 4.9 ± 0.5 ng/ml for the three elephants. Cortisol

  10. Technological renovation of thermal power plants as a long-term check factor of electricity price growth

    NASA Astrophysics Data System (ADS)

    Veselov, F. V.; Novikova, T. V.; Khorshev, A. A.

    2015-12-01

    The paper focuses on economic aspects of the Russian thermal generation sector's renovation in a competitive market environment. Capabilities of the existing competitive electricity and capacity pricing mechanisms, created during the wholesale market reform, to ensure the wide-scale modernization of thermal power plants (TPPs) are estimated. Some additional stimulating measures to focus the investment process on the renovation of the thermal generation sector are formulated, and supplementing and supporting costs are assessed. Finally, the systemic effect of decelerating wholesale electricity prices caused by efficiency improvements at thermal power plants is analyzed depending on the scales of renovation and fuel prices.

  11. Effort Begins to Reduce Childrens Exposure to Lead Paint in Nashua, N.H. Area

    EPA Pesticide Factsheets

    In an effort to improve compliance with laws that protect children from lead paint poisoning, EPA sent letters earlier this month to over 300 home renovation and painting contractors, property management companies and landlords in and around Nashua, N.H...

  12. Shuttle Repair Tools Automate Vehicle Maintenance

    NASA Technical Reports Server (NTRS)

    2013-01-01

    Successfully building, flying, and maintaining the space shuttles was an immensely complex job that required a high level of detailed, precise engineering. After each shuttle landed, it entered a maintenance, repair, and overhaul (MRO) phase. Each system was thoroughly checked and tested, and worn or damaged parts replaced, before the shuttle was rolled out for its next mission. During the MRO period, workers needed to record exactly what needed replacing and why, as well as follow precise guidelines and procedures in making their repairs. That meant traceability, and with it lots of paperwork. In 2007, the number of reports generated during electrical system repairs was getting out of hand-placing among the top three systems in terms of paperwork volume. Repair specialists at Kennedy Space Center were unhappy spending so much time at a desk and so little time actually working on the shuttle. "Engineers weren't spending their time doing technical work," says Joseph Schuh, an electrical engineer at Kennedy. "Instead, they were busy with repetitive, time-consuming processes that, while important in their own right, provided a low return on time invested." The strain of such inefficiency was bad enough that slow electrical repairs jeopardized rollout on several occasions. Knowing there had to be a way to streamline operations, Kennedy asked Martin Belson, a project manager with 30 years experience as an aerospace contractor, to co-lead a team in developing software that would reduce the effort required to document shuttle repairs. The result was System Maintenance Automated Repair Tasks (SMART) software. SMART is a tool for aggregating and applying information on every aspect of repairs, from procedures and instructions to a vehicle s troubleshooting history. Drawing on that data, SMART largely automates the processes of generating repair instructions and post-repair paperwork. In the case of the space shuttle, this meant that SMART had 30 years worth of operations

  13. Maintaining Indoor Environmental Quality (IEQ) during Construction and Renovation

    MedlinePlus

    ... Resources Other Resources Email IEQ Questions Related Topics Asbestos Asthma and Allergies Chemical Safety Construction Safety and ... the air and/or inhaled. Toxic dusts containing asbestos, polychlorinated biphenyls (PCBs) or lead can cause serious ...

  14. Outlet works energy dissipators - best practices for design, construction, problem identification and evaluation, inspection, maintenance, renovation, and repair

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An outlet works is a combination of structures and equipment required for the safe operation and control of water released from a reservoir to serve various purposes like regulating stream flow and water quality; releasing floodwater; and/or providing irrigation, municipal, or industrial water. Out...

  15. The Maintenance Gap: Deferred Repair and Renovation in the Nation's Elementary and Secondary Schools. A Joint Report.

    ERIC Educational Resources Information Center

    Council of the Great City Schools, Washington, DC.

    Data from 100 school systems in 34 states show that public schools are in a state of critical disrepair. The physical deterioration of the schools is the result of a variety of factors--including the rapid increase in energy prices, state tax and expenditure limitation measures, and health and safety requirements--that have reduced spending for…

  16. Military Family Housing Demolition, Construction, Renovation, and Leasing Program

    DTIC Science & Technology

    2003-10-01

    Squadron/Environmental Flight/Compliance section (27 CES/CEVC) for identification of Areas of Concern and for asbestos and lead-based paint will be...under the Proposed or Alternative Actions. Coordination with local utility suppliers for line identification will be required prior to ground...significant impacts. Coordination with 27 CES/CEVC for identification of Areas of Concern and for asbestos and lead-based paint environmental health

  17. Retinal detachment repair

    MedlinePlus

    Scleral buckling; Vitrectomy; Pneumatic retinopexy; Laser retinopexy; Rhegmatogenous retinal detachment repair ... it meets the hole in the retina. Scleral buckling can be done using numbing medicine while you ...

  18. A Comparison of Antenna Measurements in a Near-Field Range and a Newly Renovated Short-Tapered Chamber

    DTIC Science & Technology

    2016-09-01

    ARL-TR-7828 ● SEP 2016 US Army Research Laboratory A Comparison of Antenna Measurements in a Near-Field Range and a Newly...Comparison of Antenna Measurements in a Near-Field Range and a Newly Renovated Short-Tapered Chamber by Theodore K Anthony Sensors and Electron...4. TITLE AND SUBTITLE A Comparison of Antenna Measurements in a Near-Field Range and a Newly Renovated Short-Tapered Chamber 5a. CONTRACT NUMBER

  19. A library for the twenty-first century: the Galter Health Sciences Library's renovation and expansion project.

    PubMed

    Shedlock, J; Ross, F

    1997-04-01

    A renovation and expansion project at the Galter Health Sciences Library of Northwestern University strikes a balance between traditional and future libraries, library ambiance and high technology, old and new. When guided by a vision of future building use, renovation projects can succeed in meeting many institutional goals as a viable alternative to new library buildings. Issues addressed include planning considerations, architectural history, library design, building features, information technology considerations, and ideal library space design when new construction is not possible.

  20. Successfully Demonstrating an Integrated Roofing and BIPV Solution for an Historic Building Renovation at the United States Air Force Academy

    DTIC Science & Technology

    2011-05-01

    Successfully Demonstrating an Integrated Roofing and BIPV Solution for an Historic Building Renovation at the United States Air Force Academy...COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Successfully Demonstrating an Integrated Roofing and BIPV Solution for an Historic...ANSI Std Z39-18 Successfully Demonstrating an Integrated Roofing and BIPV Solution for an Historic Building Renovation at the United States Air Force

  1. Repairs of composite structures

    NASA Astrophysics Data System (ADS)

    Roh, Hee Seok

    Repair on damaged composite panels was conducted. To better understand adhesively bonded repair, the study investigates the effect of design parameters on the joint strength. The design parameters include bondline length, thickness of adherend and type of adhesive. Adhesives considered in this study were tested to measure their tensile material properties. Three types of adhesively bonded joints, single strap, double strap, and single lap joint were considered under changing bondline lengths, thickness of adherend and type of adhesive. Based on lessons learned from bonded joints, a one-sided patch repair method for composite structures was conducted. The composite patch was bonded to the damaged panel by either film adhesive FM-73M or paste adhesive EA-9394 and the residual strengths of the repaired specimens were compared under varying patch sizes. A new repair method using attachments has been suggested to enhance the residual strength. Results obtained through experiments were analyzed using finite element analysis to provide a better repair design and explain the experimental results. It was observed that the residual strength of the repaired specimen was affected by patch length. Method for rapid repairs of damaged composite structures was investigated. The damage was represented by a circular hole in a composite laminated plate. Pre-cured composite patches were bonded with a quick-curing commercial adhesive near (rather than over) the hole. Tensile tests were conducted on specimens repaired with various patch geometries. The test results showed that, among the methods investigated, the best repair method restored over 90% of the original strength of an undamaged panel. The interfacial stresses in the adhesive zone for different patches were calculated in order to understand the efficiencies of the designs of these patch repairs. It was found that the composite patch that yielded the best strength had the lowest interfacial peel stress between the patch and

  2. Mfd as a central partner of transcription coupled repair.

    PubMed

    Monnet, Jordan; Grange, Wilfried; Strick, Terence R; Joly, Nicolas

    2013-01-01

    Transcription-coupled repair (TCR) is one of the key of the nucleotide excision repair (NER) pathways required to preserve genome integrity. Although understanding TCR is still a major challenge, recent single-molecule experiments have brought new insights into the initial steps of TCR leading to new perspectives.

  3. Genotoxicity test of self-renovated ceramics in primary human peripheral lymphocytes.

    PubMed

    Hua, Nan; Zhu, Huifang; Zhuang, Jing; Chen, Liping

    2014-12-01

    Zirconia-based ceramics is widely used in dentistry. Different compositions of ceramics have different features. Our self-renovated ceramics become more machinable without scarifying its dental restoration properties after adjusting ratio of lanthanum phosphate (LaPO4)/yttrium oxide (Y2O3). In order to evaluate its safety, here, we tested its genotoxicity in primary human peripheral lymphocytes. The human lymphocytes cultured on three groups of different ratios of LaPO4/Y2O3 diphase ceramics for 6 days showed little effect of growth inhibition and similar effect of growth trend to the negative control. Furthermore, single-cell gel electrophoresis (comet assay) indicated that there was no significant difference of the value of tail moment between the tested ceramics and negative control, the IPS Empress II (P > 0.05). Our findings implicate that our self-renovated ceramics do not induce DNA damages in human peripheral lymphocytes and support their future clinic application.

  4. Health impact assessment: a case study on renovation of a slaughterhouse.

    PubMed

    Hengpraprom, Sarunya; Sithisarankul, Pornchai

    2012-01-01

    The purpose of this study was to conduct a health impact assessment (HIA) in a community where an old slaughterhouse was to be renovated. The authors conducted a cross-sectional study in March, 2011. Questionnaires were used to collect data and focus group discussions were conducted to solicit the community concerns and recommendations regarding the project. The results reveal positive impacts in 4 aspects of health: physical, mental, social, and spiritual. The current substandard slaughterhouse was perceived negatively by the surrounding community. They were happy the slaughterhouse would be renovated, and some preferred it moved elsewhere. This HIA had 2 positive results: first, we tested our HIA tool in a real situation and found it practical on a small scale; second, the municipality obtained the community's opinions and concerns and the community knew their opinions reached the municipality, so they were more positive about the municipality.

  5. Macrophages in tissue repair, regeneration, and fibrosis

    PubMed Central

    Wynn, Thomas A.; Vannella, Kevin M.

    2016-01-01

    Inflammatory monocytes and resident tissue macrophages are key regulators of tissue repair, regeneration, and fibrosis. Following tissue injury, monocytes and macrophages undergo marked phenotypic and functional changes to play critical roles during the initiation, maintenance, and resolution phases of tissue repair. Disturbances in macrophage function can lead to aberrant repair, with uncontrolled inflammatory mediator and growth factor production, deficient generation of anti-inflammatory macrophages, or failed communication between macrophages and epithelial cells, endothelial cells, fibroblasts, and stem or tissue progenitor cells all contributing to a state of persistent injury, which may lead to the development of pathological fibrosis. In this review, we discuss the mechanisms that instruct macrophages to adopt pro-inflammatory, pro-wound healing, pro-fibrotic, anti-inflammatory, anti-fibrotic, pro-resolving, and tissue regenerating phenotypes following injury, and highlight how some of these mechanisms and macrophage activation states could be exploited therapeutically. PMID:26982353

  6. Snowmobile Repair. Teacher Edition.

    ERIC Educational Resources Information Center

    Hennessy, Stephen S.; Conrad, Rex

    This teacher's guide contains 14 units on snowmobile repair: (1) introduction to snowmobile repair; (2) skis, front suspension, and steering; (3) drive clutch; (4) drive belts; (5) driven clutch; (6) chain drives; (7) jackshafts and axles; (8) rear suspension; (9) tracks; (10) shock absorbers; (11) brakes; (12) engines; (13) ignition and…

  7. Chain Saw Repair.

    ERIC Educational Resources Information Center

    Taylor, Mark; Helbling, Wayne

    This curriculum is designed to supplement the Comprehensive Small Engine Repair guide by covering in detail all aspects of chain saw repair. The publication contains materials for both teacher and student and is written in terms of student performance using measurable objectives. The course includes six units. Each unit contains some or all of the…

  8. Prototype wash water renovation system integration with goverment-furnished wash fixture

    NASA Technical Reports Server (NTRS)

    1983-01-01

    A total renovation concept for removing objectionable materials from spacecraft wash water to make the water reusable was developed. This concept included ferric chloride pretreatment to coagulate suspended solids such as soap and lint, pressure filtration, and carbon adsorption and ion exchange to remove trace dissolved organics and inorganic salts. A breadboard model which was developed to demonstrate the design adequacy of the various system components and the limits on system capacities and efficiencies.

  9. A Renovation Decision-Support Model for Evaluating the Functional Condition of Army Facilities

    DTIC Science & Technology

    1994-04-01

    qualitative factors generally weigh more heavily In ’ investment decisions. While some qualitative benefits . can be quantified in terms of cost...decisions. While some qualitative benefits can be quantified in terms of cost, most (e.g., convenience) do not lend themselves to quantification in any...uncertainty in the calculations. Most of the benefits of facility construction and renovation are functional, and qualitative in nature. Although some

  10. Defense Infrastructure: In-Kind Construction and Renovation Projects Initiated by DOD during Fiscal Year 2013

    DTIC Science & Technology

    2015-09-01

    the receipt of fair- market value. The Act also provided for a listing of facilities constructed or renovated with the use of in-kind payments, and...of in-kind projects reflect the fair- market value of the real-property interest in real-estate transactions. Each of the Services reported similar...Receipt of Fair- Market Value and Follow Similar Procedures for Valuing Domestic In-Kind Payment Projects to Ensure Receipt of Fair- Market Value 13

  11. Environmental Assessment: Lake Yankton Fish Population Renovation Project Yankton County, South Dakota and Cedar County, Nebraska

    DTIC Science & Technology

    2014-08-01

    mussels are known to exist in Lake Yankton. Western Prairie Fringed Orchid (Platanthera praeclara) No Affect. The western prairie fringed orchid is...a species of the North American tallgrass prairie community. Western prairie fringed orchid populations have declined significantly throughout... orchid habitat is known to occur near Lake Yankton. Lake Yankton Fish Population Renovation Project U.S. Army Corps of Engineers August 2014 3-11 Omaha

  12. [Analysis of the design and renovation of mid-sized hospital's local area network].

    PubMed

    Cao, Yang; Li, Min; Guo, Yifeng

    2011-11-01

    To address several hospital network issues, this paper discusses the overall plan, design and renovation of hospital's Local Area Network, making full use of existing network facilities. The techniques, such as Physical Separation of Internal and External Network, HSRP, OSPF, All-Routers Networking Model, etc., create features of extensibility, manageability, high safety, stability and so on to the overall network, and provide a reliable network platform to the function of the information systems.

  13. INTERNAL REPAIR OF PIPELINES

    SciTech Connect

    Bill Bruce; Nancy Porter; George Ritter; Matt Boring; Mark Lozev; Ian Harris; Bill Mohr; Dennis Harwig; Robin Gordon; Chris Neary; Mike Sullivan

    2005-07-20

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without

  14. New potentional of high-speed water jet technology for renovating concrete structures

    NASA Astrophysics Data System (ADS)

    Bodnárová, L.; Sitek, L.; Hela, R.; Foldyna, J.

    2011-06-01

    The paper discusses the background and results of research focused on the action of a high-speed water jet on concrete with different qualities. The sufficient and careful removal of degraded concrete layers is very important for the renovation of concrete structures. High-speed water jet technology is one of the most common methods used for removing degraded concrete layers. Different types of high-speed water jets were tested in the experimental part. The classical technology of a single continuous water jet generated with one nozzle was tested as well as the technology of revolving water jets generated by multiple nozzles (used mainly for the renovation of larger areas). A continuous flat water jet and pulsating flat water jet were tested the first time, because the connection of a water jet with the acoustic generator of a pulsating jet offers new possibilities for the use of a water jet (see [1] and [2]). A water jet with such a modification is capable of efficient action and can even be used for cutting solid concrete with a relatively low consumption of energy. A flat pulsating water jet which can be newly used for renovation seems to be a promising technology.

  15. Lead Poisoning

    MedlinePlus

    ... be exposed to lead by Eating food or drinking water that contains lead. Water pipes in older homes ... herbs or foods that contain lead Breathing air, drinking water, eating food, or swallowing or touching dirt that ...

  16. INTERNAL REPAIR OF PIPELINES

    SciTech Connect

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-12-31

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without

  17. New integrated approach for repairing and redesigning heavy forming tools

    NASA Astrophysics Data System (ADS)

    Bichmann, Stephan, II; Zacher, Michael; Glaser, Ulf; Pfeifer, Tilo

    2003-05-01

    Forging and sheet metal forming tools are subject to strong, partial wear in use. On the one hand wear-protection layers are applied before use, and on the other hand worn tools are repaired by manual build-up welding after use. At present the repair of such tools is carried out in separate work processes with a small degree of automation and a high proportion of manual activity. This leads to long running times and potential sources of error. Our approach to solve these problems is to develop a repair cell which will facilitate automated repairs, beginning with measurement of the worn tool areas through to the repaired, fully operational tool. This paper will describe the overall concept of this repair cell with a special focus on optical metrology. Challenges of integration and demands for different sensor types are presented as well as the specified interfaces between different processing stages during manufacturing.

  18. Renovating Organizational Culture: Influencing Your Unit’s Destiny

    DTIC Science & Technology

    2011-06-01

    priorities and styles contributes to the 17 John P. Kotter, Leading Change (Boston: Harvard Bussiness Press, 1996), 155-156. 18 Ibid., 156. 33...tend to emplace artificial or self-induced limiting factors when conducting planning or problem solving. As long as something is not prohibited, and...Ready-for-Sea (San Diego, Naval Reserve Intelligence Program, U.S. Department of Defense, 1999); U.S. Department of the Navy, Systems Approach to

  19. Mechanical characterization of composite repairs for fiberglass wind turbine blades

    NASA Astrophysics Data System (ADS)

    Chawla, Tanveer Singh

    While in service, wind turbine blades experience various modes of loading. An example is impact loading in the form of hail or bird strikes, which might lead to localized damage or formation of cracks a few plies deep on the blade surface. One of the methods to conduct repairs on wind turbine blades that are damaged while in service is hand lay-up of the repair part after grinding out the damaged portion and some of its surrounding area. The resin used for such repairs usually differs from the parent plate resin in composition and properties such as gel time, viscosity, etc. As a result the properties of the repaired parts are not the same as that of the undamaged blades. Subsequent repetitive loading can be detrimental to weak repairs to such an extent so as to cause delamination at the parent-repair bondline causing the repairs to eventually fall off the blade. Thus the strength and toughness of the repair are of critical importance. Initial part of this work consists of an effort to increase repair strength by identifying an optimum hand layup repair resin for fiberglass wind turbine blades currently being manufactured by a global company. As delamination of the repair from the parent blade is a major concern and unidirectional glass fibers along with a polymer resin are used to manufacture blades under consideration, testing method detailed in ASTM D 5528 (Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites) was followed to determine propagation fracture toughness values of the prospective vinyl ester repair resin candidates. These values were compared to those for a base polyester repair resin used by the company. Experimental procedure and results obtained from the above mentioned testing using double cantilever beam (DCB) specimens are detailed. Three new repair resins were shortlisted through mode I testing. It was also found that variation in the depth of the ground top ply of the parent part

  20. Composition of heavy metals and airborne fibers in the indoor environment of a building during renovation.

    PubMed

    Latif, Mohd Talib; Baharudin, Nor Hafizah; Velayutham, Puvaneswary; Awang, Normah; Hamdan, Harimah; Mohamad, Ruqyyah; Mokhtar, Mazlin B

    2011-10-01

    The renovation of a building will certainly affect the quality of air in the vicinity of where associated activities were undertaken, this includes the quality of air inside the building. Indoor air pollutants such as particulate matter, heavy metals, and fine fibers are likely to be emitted during renovation work. This study was conducted to determine the concentration of heavy metals, asbestos and suspended particulates in the Biology Building, at the Universiti Kebangsaan, Malaysia (UKM). Renovation activities were carried out widely in the laboratories which were located in this building. A low-volume sampler was used to collect suspended particulate matter of a diameter size less than 10 μm (PM₁₀) and an air sampling pump, fitted with a cellulose ester membrane filter, were used for asbestos sampling. Dust was collected using a small brush and scope. The concentration of heavy metals was determined through the use of inductively coupled plasma-mass spectroscopy and the fibers were counted through a phase contrast microscope. The concentrations of PM₁₀ recorded in the building during renovation action (ranging from 166 to 542 μg m⁻³) were higher than the value set by the Department of Safety and Health for respirable dust (150 μg m⁻³). Additionally, they were higher than the value of PM₁₀ recorded in indoor environments from other studies. The composition of heavy metals in PM₁₀ and indoor dust were found to be dominated by Zn and results also showed that the concentration of heavy metals in indoor dust and PM₁₀ in this study was higher than levels recorded in other similar studies. The asbestos concentration was 0.0038 ± 0.0011 fibers/cc. This was lower than the value set by the Malaysian Department of Occupational, Safety and Health (DOSH) regulations of 0.1 fibers/cc, but higher than the background value usually recorded in indoor environments. This study strongly suggests that renovation issues need to be considered seriously

  1. INTERNAL REPAIR OF PIPELINES

    SciTech Connect

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-08-17

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners

  2. The lead industry and lead water pipes "A Modest Campaign".

    PubMed

    Rabin, Richard

    2008-09-01

    Lead pipes for carrying drinking water were well recognized as a cause of lead poisoning by the late 1800s in the United States. By the 1920s, many cities and towns were prohibiting or restricting their use. To combat this trend, the lead industry carried out a prolonged and effective campaign to promote the use of lead pipes. Led by the Lead Industries Association (LIA), representatives were sent to speak with plumbers' organizations, local water authorities, architects, and federal officials. The LIA also published numerous articles and books that extolled the advantages of lead over other materials and gave practical advice on the installation and repair of lead pipes. The LIA's activities over several decades therefore contributed to the present-day public health and economic cost of lead water pipes.

  3. Lead Toxicity

    MedlinePlus

    ... including some imported jewelry. What are the health effects of lead? • More commonly, lower levels of lead in children over time may lead to reduced IQ, slow learning, Attention Deficit Hyperactivity Disorder (ADHD), or behavioral issues. • Lead also affects other ...

  4. Lead poisoning

    SciTech Connect

    Rekus, J.F.

    1992-08-01

    Construction workers who weld, cut or blast structural steel coated with lead-based paint are at significant risk of lead poisoning. Although technology to control these exposures may not have existed when the lead standard was promulgated, it is available today. Employers who do not take steps to protect their employees from lead exposure may be cited and fined severely for their failure.

  5. Rapid road repair vehicle

    DOEpatents

    Mara, Leo M.

    1999-01-01

    Disclosed are improvments to a rapid road repair vehicle comprising an improved cleaning device arrangement, two dispensing arrays for filling defects more rapidly and efficiently, an array of pre-heaters to heat the road way surface in order to help the repair material better bond to the repaired surface, a means for detecting, measuring, and computing the number, location and volume of each of the detected surface imperfection, and a computer means schema for controlling the operation of the plurality of vehicle subsystems. The improved vehicle is, therefore, better able to perform its intended function of filling surface imperfections while moving over those surfaces at near normal traffic speeds.

  6. Glenn Refractory Adhesive for Bonding and Exterior Repair (GRABER) Developed for Repairing Shuttle Damage

    NASA Technical Reports Server (NTRS)

    Singh, Mrityunjay; Shpargel, Tarah P.

    2005-01-01

    Advanced in-space repair technologies for reinforced carbon/carbon composite (RCC) thermal protection system (TPS) structures are critically needed for the space shuttle Return To Flight (RTF) efforts. These technologies are also critical for the repair and refurbishment of thermal protection system structures of future Crew Exploration Vehicles of space exploration programs. The Glenn Refractory Adhesive for Bonding and Exterior Repair (GRABER) material developed at the NASA Glenn Research Center has demonstrated capabilities for repair of small cracks and damage in RCC leading-edge material. The concept consists of preparing an adhesive paste of desired ceramic in a polymer/phenolic resin matrix with appropriate additives, such as surfactants, and then applying the paste into the damaged or cracked area of the RCC composite components with caulking guns. The adhesive paste cures at 100 to 120 C and transforms into a high-temperature ceramic during simulated vehicle reentry testing conditions.

  7. Soil is an important pathway of human lead exposure.

    PubMed Central

    Mielke, H W; Reagan, P L

    1998-01-01

    This review shows the equal or greater importance of leaded gasoline-contaminated dust compared to lead-based paint to the child lead problem, and that soil lead, resulting from leaded gasoline and pulverized lead-based paint, is at least or more important than lead-based paint (intact and not pulverized) as a pathway of human lead exposure. Because lead-based paint is a high-dose source, the biologically relevant dosage is similar to lead in soil. Both lead-based paint and soil lead are associated with severe lead poisoning. Leaded gasoline and lead in food, but not lead-based paint, are strongly associated with population blood lead levels in both young children and adults. Soil lead and house dust, but not lead-based paint, are associated with population blood lead levels in children. Most soil lead and house dust are associated with leaded gasoline. Lead-based paint dust is associated with cases of renovation of either exterior or interior environments in which the paint was pulverized. Based upon the limited data to date, abatement of soil lead is more effective than abatement of lead-based paint in reducing blood lead levels of young children. About equal numbers of children under 7 years of age are exposed to soil lead and lead-based paint. Seasonality studies point to soil lead as the main source of population blood lead levels. Soil lead is a greater risk factor than lead-based paint to children engaged in hand-to-mouth and pica behavior. In summary, soil lead is important for addressing the population of children at risk of lead poisoning. When soil lead is acknowledged by regulators and the public health community as an important pathway of human lead exposure, then more effective opportunities for improving primary lead prevention can become a reality. Images Figure 1 PMID:9539015

  8. Brain aneurysm repair - discharge

    MedlinePlus

    ... gov/pubmed/22556195 . Szeder V, Tateshima S, Duckwiler GR. Intracranial aneurysms and subarachnoid hemorrhage. In: Daroff RB, Jankovic J, ... chap 67. Read More Aneurysm in the brain Brain aneurysm repair Brain surgery Recovering after stroke Seizures Smoking - ...

  9. Pectus excavatum repair

    MedlinePlus

    Gottlieb LJ, Reid RR, Lee JC. Pediatric chest and trunk defects. In: Neligan PC, ed. Plastic Surgery . 3rd ed. Philadelphia, PA: Elsevier; 2013:chap 41. Lumpkins KM, Colombani P, Abdullah F. Repair ...

  10. Diaphragmatic hernia repair - slideshow

    MedlinePlus

    ... presentations/100014.htm Diaphragmatic hernia repair - series—Normal anatomy To use the sharing ... Overview The chest cavity includes the heart and lungs. The abdominal cavity includes the liver, the stomach, ...

  11. Timpani Repair and Maintenance.

    ERIC Educational Resources Information Center

    Combs, F. Michael

    1980-01-01

    Rather than focusing on specific brands of timpani, these guidelines for repair cover mechanical problems of a general nature: pedals, dents, unclear tone, and squeaking. Preventive maintenance is discussed. (Author/SJL)

  12. INTERNAL REPAIR OF PIPELINES

    SciTech Connect

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; Nancy Porter; Mike Sullivan; Chris Neary

    2004-04-12

    The two broad categories of deposited weld metal repair and fiber-reinforced composite liner repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repair and for fiber-reinforced composite liner repair. Evaluation trials have been conducted using a modified fiber-reinforced composite liner provided by RolaTube and pipe sections without liners. All pipe section specimens failed in areas of simulated damage. Pipe sections containing fiber-reinforced composite liners failed at pressures marginally greater than the pipe sections without liners. The next step is to evaluate a liner material with a modulus of elasticity approximately 95% of the modulus of elasticity for steel. Preliminary welding parameters were developed for deposited weld metal repair in preparation of the receipt of Pacific Gas & Electric's internal pipeline welding repair system (that was designed specifically for 559 mm (22 in.) diameter pipe) and the receipt of 559 mm (22 in.) pipe sections from Panhandle Eastern. The next steps are to transfer welding parameters to the PG&E system and to pressure test repaired pipe sections to failure. A survey of pipeline operators was conducted to better understand the needs and performance requirements of the natural gas transmission industry regarding internal repair. Completed surveys contained the following principal conclusions: (1) Use of internal weld repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling (HDD) when a new bore must be created to

  13. Hypospadias repair - discharge

    MedlinePlus

    ... Campbell-Walsh Urology . 10th ed. Philadelphia, PA: Elsevier Saunders; 2011:chap 130. Read More Hypospadias Hypospadias repair Kidney removal Review Date 1/21/2015 Updated by: Scott Miller, MD, Urologist in private practice in Atlanta, ...

  14. Meningocele repair - slideshow

    MedlinePlus

    ... ency/presentations/100128.htm Meningocele repair - series—Normal anatomy To use the sharing features on this page, ... Sinai Medical Center, Los Angeles and Department of Anatomy, University of California, San Francisco, CA. Review provided ...

  15. Achilles tendon repair

    MedlinePlus

    Achilles tendon rupture-surgery; Percutaneous Achilles tendon rupture repair ... To fix your torn Achilles tendon, the surgeon will: Make a cut down the back of your heel Make several small cuts rather than one large cut ...

  16. Bone fracture repair - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100077.htm Bone fracture repair - series—Indications To use the sharing features ... Go to slide 4 out of 4 Overview Fractures of the bones are classified in a number ...

  17. Femur fracture repair - discharge

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000166.htm Femur fracture repair - discharge To use the sharing features on this page, please enable JavaScript. You had a fracture (break) in the femur in your leg. It ...

  18. Pectus excavatum repair - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100035.htm Pectus excavatum repair - series—Normal anatomy To use the sharing ... Go to slide 4 out of 4 Overview Pectus excavatum is a deformity of the front of the ...

  19. Eye muscle repair - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100062.htm Eye muscle repair - series—Normal anatomy To use the sharing ... the eyeball to the eye socket. The external muscles of the eye are found behind the conjunctiva. ...

  20. Ventral hernia repair

    MedlinePlus

    ... Philadelphia. PA: Elsevier Saunders; 2014:539-545. Nagle AP, Soper NJ. Laparoscopic ventral hernia repair. In: Khatri ... Support Get email updates Subscribe to RSS Follow us Disclaimers Copyright Privacy Accessibility Quality Guidelines Viewers & Players ...

  1. Patent urachus repair

    MedlinePlus

    Patent urachal tube repair ... belly. Next, the surgeon will find the urachal tube and remove it. The bladder opening will be ... surgeon uses the tools to remove the urachal tube and close off the bladder and area where ...

  2. Imperforate anus repair - slideshow

    MedlinePlus

    ... presentations/100030.htm Imperforate anus repair - series—Normal anatomy To use the sharing features on this page, ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

  3. Rotator cuff repair - slideshow

    MedlinePlus

    ... presentations/100229.htm Rotator cuff repair - series—Normal anatomy To use the sharing features on this page, ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

  4. Carpal tunnel repair - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100078.htm Carpal tunnel repair - series—Normal anatomy To use the sharing ... in the wrist and the wrist bones (carpal tunnel). Review Date 5/9/2015 Updated by: C. ...

  5. Proximal Hamstring Repair Strength

    PubMed Central

    Harvey, Margaret Ann; Singh, Hardeep; Obopilwe, Elifho; Charette, Ryan; Miller, Suzanne

    2015-01-01

    Background: Proximal hamstring repair for complete ruptures has become a common treatment. There is no consensus in the literature about postoperative rehabilitation protocols following proximal hamstring repair. Some protocols describe bracing to prevent hip flexion or knee extension while others describe no immobilization. There are currently no biomechanical studies evaluating proximal hamstring repairs; nor are there any studies evaluating the effect of different hip flexion angles on these repairs. Hypothesis: As hip flexion increases from 0° to 90°, there will be a greater gap with cyclical loading. Study Design: Controlled laboratory study. Methods: Proximal hamstring insertions were detached from the ischial tuberosity in 24 cadavers and were repaired with 3 single-loaded suture anchors in the hamstring footprint with a Krakow suture technique. Cyclic loading from 10 to 125 N at 1 Hz was then performed for 0°, 45°, and 90° of hip flexion for 1500 cycles. Gap formation, stiffness, yield load, ultimate load, and energy to ultimate load were compared between groups using paired t tests. Results: Cyclic loading demonstrated the least amount of gap formation (P < .05) at 0° of hip flexion (2.39 mm) and most at 90° of hip flexion (4.19 mm). There was no significant difference in ultimate load between hip flexion angles (326, 309, and 338 N at 0°, 45°, and 90°, respectively). The most common mode of failure occurred with knot/suture failure (n = 17). Conclusion: Increasing hip flexion from 0° to 90° increases the displacement across proximal hamstring repairs. Postoperative bracing that limits hip flexion should be considered. Clinical Relevance: Repetitive motion involving hip flexion after a proximal hamstring repair may cause compromise of the repair. PMID:26665049

  6. Lead Poisoning

    MedlinePlus

    ... from lead poisoning in New Hampshire and in Alabama. Lead poisoning has also been associated with juvenile ... for decades—after it first enters the blood stream. (The same process can occur with the onset ...

  7. Lead poisoning

    MedlinePlus

    ... Failure at school Hearing problems Kidney damage Reduced IQ Slowed body growth The symptoms of lead poisoning ... can have a permanent impact on attention and IQ. People with higher lead levels have a greater ...

  8. Chromatin Remodeling, DNA Damage Repair and Aging

    PubMed Central

    Liu, Baohua; Yip, Raymond KH; Zhou, Zhongjun

    2012-01-01

    Cells are constantly exposed to a variety of environmental and endogenous conditions causing DNA damage, which is detected and repaired by conserved DNA repair pathways to maintain genomic integrity. Chromatin remodeling is critical in this process, as the organization of eukaryotic DNA into compact chromatin presents a natural barrier to all DNA-related events. Studies on human premature aging syndromes together with normal aging have suggested that accumulated damages might lead to exhaustion of resources that are required for physiological functions and thus accelerate aging. In this manuscript, combining the present understandings and latest findings, we focus mainly on discussing the role of chromatin remodeling in the repair of DNA double-strand breaks (DSBs) and regulation of aging. PMID:23633913

  9. DNA repair in ischemic acute kidney injury.

    PubMed

    Pressly, Jeffrey D; Park, Frank

    2017-04-01

    Ischemia-reperfusion injury (IRI) is a common cause of acute kidney injury leading to an induction of oxidative stress, cellular dysfunction, and loss of renal function. DNA damage, including oxidative base modifications and physical DNA strand breaks, is a consequence of renal IRI. Like many other organs in the body, a redundant and highly conserved set of endogenous repair pathways have evolved to selectively recognize the various types of cellular DNA damage and combat its negative effects on cell viability. Severe damage to the DNA, however, can trigger cell death and elimination of the injured tubular epithelial cells. In this minireview, we summarize the state of the current field of DNA damage and repair in the kidney and provide some expected and, in some cases, unexpected effects of IRI on DNA damage and repair in the kidney. These findings may be applicable to other forms of acute kidney injury and could provide new opportunities for renal research.

  10. Exosomes and cardiac repair after myocardial infarction.

    PubMed

    Sahoo, Susmita; Losordo, Douglas W

    2014-01-17

    Myocardial infarction is a leading cause of death among all cardiovascular diseases. The analysis of molecular mechanisms by which the ischemic myocardium initiates repair and remodeling indicates that secreted soluble factors are key players in communication to local and distant tissues, such as bone marrow. Recently, actively secreted membrane vesicles, including exosomes, are being recognized as new candidates with important roles in intercellular and tissue-level communication. In this review, we critically examine the emerging role of exosomes in local and distant microcommunication mechanisms after myocardial infarction. A comprehensive understanding of the role of exosomes in cardiac repair after myocardial infarction could bridge a major gap in knowledge of the repair mechanism after myocardial injury.

  11. Integrative repair of the meniscus: lessons from in vitro studies.

    PubMed

    McNulty, Amy L; Guilak, Farshid

    2008-01-01

    Current therapies for meniscal injury seek to preserve and repair damaged tissue since loss of meniscal tissue is associated with degenerative changes in the joint, ultimately leading to osteoarthritis (OA). After a meniscal tear, the difficulty of integrating juxtaposed meniscal surfaces continues to be an obstacle. In order to determine the local factors that are necessary for successful tissue repair, previous studies have developed in vitro model systems that allow both biological and quantitative biomechanical measures of meniscus repair. Many studies have shown the importance of individual factors in meniscus metabolism, but there is a complex interplay among a variety of factors that influence meniscal healing, including inflammatory cytokines, growth factors, mechanical loading, and zonal differences in cell and tissue properties. In particular, the upregulation of inflammatory cytokines following joint injury appears to have significant catabolic influences on meniscal cell metabolic activity that must be overcome in order to promote repair. In the presence of inflammatory cytokines, such as interleukin-1 (IL-1) or tumor necrosis factor alpha (TNF-alpha), intrinsic meniscal repair in vitro is significantly inhibited. While anabolic growth factors, such as transforming growth factor-beta1 (TGF-beta1), enhance meniscal repair, they cannot completely overcome the IL-1-mediated inhibition of repair. The mechanisms by which these mediators influence meniscal repair, and their interactions with other factors in the microenvironment, such as mechanical loading, remain to be determined. Future studies must address these complex interactions during meniscal healing to ultimately enhance meniscal repair.

  12. DNA Repair and Personalized Breast Cancer Therapy

    PubMed Central

    Li, Shu-Xia; Sjolund, Ashley; Harris, Lyndsay; Sweasy, Joann B.

    2010-01-01

    Personalized cancer therapy is likely to be one of the next big advances in our search for a cure for cancer. To be able to treat people in an individualized manner, researchers need to know a great deal about their genetic constitution and the DNA repair status of their tumors. Specific knowledge is required regarding the polymorphisms individuals carry and how these polymorphisms influence responses to therapy. Researchers are actively engaged in biomarker discovery and validation for this purpose. In addition, the design of clinical trials must be reassessed to include new information on biomarkers and drug responses. In this review, we focus on personalized breast cancer therapy. The hypothesis we focus upon in this review is that there is connection between the DNA repair profile of individuals, their breast tumor subtypes, and their responses to cancer therapy. We first briefly review cellular DNA repair pathways that are likely to be impacted by breast cancer therapies. Next, we review the phenotypes of breast tumor subtypes with an emphasis on how a DNA repair deficiency might result in tumorigenesis itself and lead to the chemotherapeutic responses that are observed. Specific examples of breast tumor subtypes and their responses to cancer therapy are given, and we discuss possible DNA repair mechanisms that underlie the responses of tumors to various chemotherapeutic agents. Much is known about breast cancer subtypes and the way each of these subtypes responds to chemotherapy. In addition, we discuss novel design of clinical trials that incorporates rapidly emerging information on biomarkers. PMID:20872853

  13. A BIM-based system for demolition and renovation waste estimation and planning

    SciTech Connect

    Cheng, Jack C.P.; Ma, Lauren Y.H.

    2013-06-15

    Highlights: ► We developed a waste estimation system leveraging the BIM technology. ► The system can calculate waste disposal charging fee and pick-up truck demand. ► We presented an example scenario demonstrating this system. ► Automatic, time-saving and wide applicability are the features of the system. - Abstract: Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C and D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D and R) works and the growing amount of D and R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D and R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results

  14. Renovation And Adaptation Of The Historic Olsztyn Purification House Bet Tahara Into A Public Utility Building

    NASA Astrophysics Data System (ADS)

    Deja, Barbara Maria

    2015-09-01

    The historic Jewish Purification House Bet Tahara was erected in Olsztyn in 1913 on the basis of the debut design of Erich Mendelsohn, a world-famous architect born in Olsztyn. The most valuable element of the building is a self-supporting pyramid vault above a mourning hall. The paper presents the interesting structure of the building, its technical condition before renovation, as well as the scope of work involved in adapting it into a public utility building - MENDELSOHN HOUSE Intercultural Dialogue Centre. The undertaking was executed thanks to the commitment of the building's leaseholder - "Borussia" Cultural Community Association, which raised money for this goal from public funds.

  15. Prevention by Design: Construction and Renovation of Health Care Facilities for Patient Safety and Infection Prevention.

    PubMed

    Olmsted, Russell N

    2016-09-01

    The built environment supports the safe care of patients in health care facilities. Infection preventionists and health care epidemiologists have expertise in prevention and control of health care-associated infections (HAIs) and assist with designing and constructing facilities to prevent HAIs. However, design elements are often missing from initial concepts. In addition, there is a large body of evidence that implicates construction and renovation as being associated with clusters of HAIs, many of which are life threatening for select patient populations. This article summarizes known risks and prevention strategies within a framework for patient safety.

  16. A BIM-based system for demolition and renovation waste estimation and planning.

    PubMed

    Cheng, Jack C P; Ma, Lauren Y H

    2013-06-01

    Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C&D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D&R) works and the growing amount of D&R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D&R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results could provide alerts to contractors ahead of time at project planning stage. This paper also presents an example scenario with a 47-floor residential building in Hong Kong to demonstrate our D&R waste estimation and planning system. As the BIM technology has been increasingly adopted in the architectural, engineering and construction industry

  17. Indoor air quality in green-renovated vs. non-green low-income homes of children living in a temperate region of US (Ohio).

    PubMed

    Coombs, Kanistha C; Chew, Ginger L; Schaffer, Christopher; Ryan, Patrick H; Brokamp, Cole; Grinshpun, Sergey A; Adamkiewicz, Gary; Chillrud, Steve; Hedman, Curtis; Colton, Meryl; Ross, Jamie; Reponen, Tiina

    2016-06-01

    Green eco-friendly housing includes approaches to reduce indoor air pollutant sources and to increase energy efficiency. Although sealing/tightening buildings can save energy and reduce the penetration of outdoor pollutants, an adverse outcome can be increased buildup of pollutants with indoor sources. The objective of this study was to determine the differences in the indoor air quality (IAQ) between green and non-green homes in low-income housing complexes. In one housing complex, apartments were renovated using green principles (n=28). Home visits were conducted immediately after the renovation, and subsequently at 6 months and at 12 months following the renovation. Of these homes, eight homes had pre-renovation home visits; this allowed pre- and post-renovation comparisons within the same homes. Parallel visits were conducted in non-green (control) apartments (n=14) in a nearby low-income housing complex. The IAQ assessments included PM2.5, black carbon, ultrafine particles, sulfur, total volatile organic compounds (VOCs), formaldehyde, and air exchange rate. Data were analyzed using linear mixed-effects models. None of the indoor pollutant concentrations were significantly different between green and non-green homes. However, we found differences when comparing the concentrations before and after renovation. Measured immediately after renovation, indoor black carbon concentrations were significantly lower averaging 682 ng/m(3) in post-renovation vs. 2364 ng/m(3) in pre-renovation home visits (p=0.01). In contrast, formaldehyde concentrations were significantly higher in post-renovated (0.03 ppm) than in pre-renovated homes (0.01 ppm) (p=0.004). Questionnaire data showed that opening of windows occurred less frequently in homes immediately post-renovation compared to pre-renovation; this factor likely affected the levels of indoor black carbon (from outdoor sources) and formaldehyde (from indoor sources) more than the renovation status itself. To reduce IAQ

  18. A library for the twenty-first century: the Galter Health Sciences Library's renovation and expansion project.

    PubMed Central

    Shedlock, J; Ross, F

    1997-01-01

    A renovation and expansion project at the Galter Health Sciences Library of Northwestern University strikes a balance between traditional and future libraries, library ambiance and high technology, old and new. When guided by a vision of future building use, renovation projects can succeed in meeting many institutional goals as a viable alternative to new library buildings. Issues addressed include planning considerations, architectural history, library design, building features, information technology considerations, and ideal library space design when new construction is not possible. Images PMID:9160155

  19. Incisional hernia repair.

    PubMed

    Millikan, Keith W

    2003-10-01

    Incisional ventral hernias are a common problem encountered by surgeons, with over 100,000 repairs being performed annually in the United States. Although many predisposing factors for incisional ventral hernia are patient-related, some factors such as type of primary closure and materials used may reduce the overall incidence of incisional ventral hernia. With the advent of prosthetic meshes being used for incisional ventral hernia repair, the recurrence rate has dropped to approximately 10%. More recently, with the development of prosthetic mesh that is now safe to place intraperitoneally, the recurrence rate has dropped to under 5%. The current controversies that exist for incisional ventral hernia repair are which approach to use (open versus laparoscopic) and what type of fixation (partial- versus full-thickness abdominal muscular/fascial wall) is necessary to stabilize the position of the mesh while tissue ingrowth occurs. During the next decade the answers to these controversies should be available in the surgical literature.

  20. Leading Democratically

    ERIC Educational Resources Information Center

    Brookfield, Stephen

    2010-01-01

    Democracy is the most venerated of American ideas, the one for which wars are fought and people die. So most people would probably agree that leaders should be able to lead well in a democratic society. Yet, genuinely democratic leadership is a relative rarity. Leading democratically means viewing leadership as a function or process, rather than…

  1. Rescheduling with iterative repair

    NASA Technical Reports Server (NTRS)

    Zweben, Monte; Davis, Eugene; Daun, Brian; Deale, Michael

    1992-01-01

    This paper presents a new approach to rescheduling called constraint-based iterative repair. This approach gives our system the ability to satisfy domain constraints, address optimization concerns, minimize perturbation to the original schedule, and produce modified schedules quickly. The system begins with an initial, flawed schedule and then iteratively repairs constraint violations until a conflict-free schedule is produced. In an empirical demonstration, we vary the importance of minimizing perturbation and report how fast the system is able to resolve conflicts in a given time bound. These experiments were performed within the domain of Space Shuttle ground processing.

  2. Rescheduling with iterative repair

    NASA Technical Reports Server (NTRS)

    Zweben, Monte; Davis, Eugene; Daun, Brian; Deale, Michael

    1992-01-01

    This paper presents a new approach to rescheduling called constraint-based iterative repair. This approach gives our system the ability to satisfy domain constraints, address optimization concerns, minimize perturbation to the original schedule, produce modified schedules, quickly, and exhibits 'anytime' behavior. The system begins with an initial, flawed schedule and then iteratively repairs constraint violations until a conflict-free schedule is produced. In an empirical demonstration, we vary the importance of minimizing perturbation and report how fast the system is able to resolve conflicts in a given time bound. We also show the anytime characteristics of the system. These experiments were performed within the domain of Space Shuttle ground processing.

  3. Invasive pulmonary aspergillosis in neutropenic patients and the influence of hospital renovation.

    PubMed

    Pini, Gabriella; Faggi, Elisabetta; Donato, Rosa; Sacco, Cristiana; Fanci, Rosa

    2008-03-01

    To evaluate the effects of airborne Aspergillus contamination during and after the renovation work of a Florentine haematology unit, we conducted (November 2003-January 2005) a strict programme of environmental fungal surveillance. Air samples were taken from patients' rooms, along the corridors inside the wards, along the corridor between wards and outside the building. The concentration of Aspergillus fumigatus was high along the corridor between the two haematology wards (2.98 CFU m(-3)), lower in the non-neutropenic patients' rooms and outside the hospital building (1.53 and 1.42 CFU m(-3), respectively), very low in the neutropenic patients' rooms (0.09 CFU m(-3)). During this period, three proven cases (A. fumigatus), two probable ones and two possible cases of invasive pulmonary aspergillosis were documented in 97 patients with acute leukaemia (7%). The three cases of proven aspergillosis coincided with the period of renovation work and with the period in which we have found the maximum concentration of A. fumigatus along the corridor. These data suggest a possible relationship between environmental fungal contamination and the incidence of invasive aspergillosis, and underline the importance of environmental surveillance.

  4. Health and housing outcomes from green renovation of low-income housing in Washington, DC.

    PubMed

    Jacobs, David E; Breysse, Jill; Dixon, Sherry L; Aceti, Susan; Kawecki, Carol; James, Mark; Wilson, Jay

    2014-03-01

    Green building systems have proliferated recently, but studies are limited of associated health and housing outcomes. The authors measured self-reported resident physical and mental health, allergens, and building conditions at baseline and one-year follow-up in a low-income housing development being renovated in accordance with green healthy housing improvements (Enterprise Green Communities standards and Leadership in Energy & Environmental Design [LEED] gold certification). Self-reported general health in adults significantly improved from 59% to 67% (p = .026), with large statistically significant improvements in water/ dampness problems, cockroaches and rodents, and reduced pesticide use. Median cockroach (Bla g1) and mouse (Mus m1) allergen dust loadings showed large and statistically significant reductions from baseline to three months postintervention and were sustained at one year (both p < .05). Energy and water cost savings were 16% and 54%, respectively. Incorporating Enterprise Green Communities and LEED standards in low-income housing renovation improves health and housing conditions and can help to reduce disparities. All green housing standards should include health-related requirements.

  5. Effect of renovating an office building on occupants' comfort and health.

    PubMed

    Pejtersen, J; Brohus, H; Hyldgaard, C E; Nielsen, J B; Valbjørn, O; Hauschildt, P; Kjaergaard, S K; Wolkoff, P

    2001-03-01

    An intervention study was performed in a mechanically ventilated office building in which there were severe indoor climate complaints among the occupants. In one part of the building a new heating and ventilation strategy was implemented by renovating the HVAC system, and a carpet was replaced with a low-emitting vinyl floor material; the other part of the building was kept unchanged, serving as a control. A comprehensive indoor climate investigation was performed before and after the intervention. Over a 2-week period, the occupants completed a daily questionnaire regarding their comfort and health. Physiological examinations of eyes, nose and lungs were performed on each occupant. Physical, chemical and sensory measurements were performed before and after the intervention. The renewal of the flooring material was performed after a sensory test of alternative solutions in the laboratory. Before the floor material was installed in the office building, a full-scale exposure experiment was performed in the laboratory. The new ventilation strategy and renovation of the HVAC system were selected on the basis of laboratory experiments on a full-scale mock-up of a cellular office. The severity of occupants' environmental perceptions and symptoms was significantly reduced by the intervention.

  6. Undetected Bacillus pseudo-outbreak after renovation work in a teaching hospital.

    PubMed

    Ohsaki, Yoshinobu; Koyano, Shin; Tachibana, Mineji; Shibukawa, Kiyoko; Kuroki, Masako; Yoshida, Itsuro; Ito, Yoshihisa

    2007-06-01

    A 602-bed capacity hospital underwent complete renovation from 1999 to 2004. In April 2005, the Infection Control Team was informed of the occurrence of three consecutive cases of Bacillus cereus bacteremia in a ward for patients with hematologic malignancies. A retrospective analysis of patients with Bacillus isolates was initiated. We found more Bacillus cereus isolates from blood samples in 2004 compare to the preceding years. Swab samples were collected in the particular ward from the surface of a working desk, filter unit of the air-conditioners, entrance of air inlet ducts, exit of the air outlet ducts and three-way valves of the particular ward under the consideration of iatrogenic contamination. Towels and gowns used in the ward were examined. Dens dust was noted in the filter of the air-conditioner and inlets/outlets of the air-ventilation system of the ward. Bacillus cereus was isolated from the dust, and from cleaned towels and gowns. PFGE fingerprinting differed among four patients' sample. We considered the present case as an undetected Bacillus cereus pseudo-outbreak that lasted for about one year after the renovation work of the hospital. We also considered that filters of the HVAC-system and towels and gowns were probable sources of the outbreak.

  7. Signaling Pathways in Cartilage Repair

    PubMed Central

    Mariani, Erminia; Pulsatelli, Lia; Facchini, Andrea

    2014-01-01

    In adult healthy cartilage, chondrocytes are in a quiescent phase characterized by a fine balance between anabolic and catabolic activities. In ageing, degenerative joint diseases and traumatic injuries of cartilage, a loss of homeostatic conditions and an up-regulation of catabolic pathways occur. Since cartilage differentiation and maintenance of homeostasis are finely tuned by a complex network of signaling molecules and biophysical factors, shedding light on these mechanisms appears to be extremely relevant for both the identification of pathogenic key factors, as specific therapeutic targets, and the development of biological approaches for cartilage regeneration. This review will focus on the main signaling pathways that can activate cellular and molecular processes, regulating the functional behavior of cartilage in both physiological and pathological conditions. These networks may be relevant in the crosstalk among joint compartments and increased knowledge in this field may lead to the development of more effective strategies for inducing cartilage repair. PMID:24837833

  8. Electric motor model repair specifications

    SciTech Connect

    1995-08-01

    These model repair specifications list the minimum requirements for repair and overhaul of polyphase AC squireel cage induction motors. All power ranges, voltages, and speeds of squirrel cage motors are covered.

  9. Animal Models for Cartilage Regeneration and Repair

    PubMed Central

    Szczodry, Michal; Bruno, Stephen

    2010-01-01

    Articular cartilage injury and degeneration are leading causes of disability. Animal studies are critically important to developing effective treatments for cartilage injuries. This review focuses on the use of animal models for the study of the repair and regeneration of focal cartilage defects. Animals commonly used in cartilage repair studies include murine, lapine, canine, caprine, porcine, and equine models. There are advantages and disadvantages to each model. Small animal rodent and lapine models are cost effective, easy to house, and useful for pilot and proof-of-concept studies. The availability of transgenic and knockout mice provide opportunities for mechanistic in vivo study. Athymic mice and rats are additionally useful for evaluating the cartilage repair potential of human cells and tissues. Their small joint size, thin cartilage, and greater potential for intrinsic healing than humans, however, limit the translational value of small animal models. Large animal models with thicker articular cartilage permit study of both partial thickness and full thickness chondral repair, as well as osteochondral repair. Joint size and cartilage thickness for canine, caprine, and mini-pig models remain significantly smaller than that of humans. The repair and regeneration of chondral and osteochondral defects of size and volume comparable to that of clinically significant human lesions can be reliably studied primarily in equine models. While larger animals may more closely approximate the human clinical situation, they carry greater logistical, financial, and ethical considerations. A multifactorial analysis of each animal model should be carried out when planning in vivo studies. Ultimately, the scientific goals of the study will be critical in determining the appropriate animal model. PMID:19831641

  10. Plasma membrane wounding and repair in pulmonary diseases.

    PubMed

    Cong, Xiaofei; Hubmayr, Rolf D; Li, Changgong; Zhao, Xiaoli

    2017-03-01

    Various pathophysiological conditions such as surfactant dysfunction, mechanical ventilation, inflammation, pathogen products, environmental exposures, and gastric acid aspiration stress lung cells, and the compromise of plasma membranes occurs as a result. The mechanisms necessary for cells to repair plasma membrane defects have been extensively investigated in the last two decades, and some of these key repair mechanisms are also shown to occur following lung cell injury. Because it was theorized that lung wounding and repair are involved in the pathogenesis of acute respiratory distress syndrome (ARDS) and idiopathic pulmonary fibrosis (IPF), in this review, we summarized the experimental evidence of lung cell injury in these two devastating syndromes and discuss relevant genetic, physical, and biological injury mechanisms, as well as mechanisms used by lung cells for cell survival and membrane repair. Finally, we discuss relevant signaling pathways that may be activated by chronic or repeated lung cell injury as an extension of our cell injury and repair focus in this review. We hope that a holistic view of injurious stimuli relevant for ARDS and IPF could lead to updated experimental models. In addition, parallel discussion of membrane repair mechanisms in lung cells and injury-activated signaling pathways would encourage research to bridge gaps in current knowledge. Indeed, deep understanding of lung cell wounding and repair, and discovery of relevant repair moieties for lung cells, should inspire the development of new therapies that are likely preventive and broadly effective for targeting injurious pulmonary diseases.

  11. Lead poisoning in automobile radiator mechanics.

    PubMed

    Goldman, R H; Baker, E L; Hannan, M; Kamerow, D B

    1987-07-23

    Exposure to lead occurs during automobile radiator repair when soldered joints are heated, but this relatively common hazard has received little public recognition. We therefore studied lead exposure among automobile radiator mechanics in the Boston area. Twenty-seven shops were surveyed, and most were found to be small and poorly ventilated. Seventy-five workers were interviewed and tested for blood lead and free erythrocyte protoporphyrin levels. Fifty-six of the 75 actually repaired radiators, and they had a mean blood lead level of 37.1 micrograms per deciliter (range, 16 to 73). Thirty-nine percent of these mechanics had levels higher than 40 micrograms per deciliter; hematologic, neurologic, and renal effects are known to develop at or above this blood lead level. Multiple regression analysis showed that the number of radiator repair work stations (an index of exposure) was the variable most significantly associated with increased blood lead levels. We conclude that excessive exposure to lead occurs frequently among radiator repair workers and should be prevented by improved ventilation, engineering controls, and the use of respirators (if indicated) while working.

  12. DNA base excision repair nanosystem engineering: model development.

    PubMed

    Sokhansanj, B A

    2005-01-01

    DNA base damage results from a combination of endogenous sources, (normal metabolism, increased metabolism due to obesity, stress from diseases such as arthritis and diabetes, and ischemia) and the environment (ingested toxins, ionizing radiation, etc.). If unrepaired DNA base damage can lead to diminished cell function, and potentially diseases and eventually mutations that lead to cancer. Sophisticated DNA repair mechanisms have evolved in all living cells to preserve the integrity of inherited genetic information and transcriptional control. Understanding a system like DNA repair is greatly enhanced by using engineering methods, in particular modeling interactions and using predictive simulation to analyze the impact of perturbations. We describe the use of such a "nanosystem engineering" approach to analyze the DNA base excision repair pathway in human cells, and use simulation to predict the impact of varying enzyme concentration on DNA repair capacity.

  13. DNA repair mechanisms in cancer development and therapy

    PubMed Central

    Torgovnick, Alessandro; Schumacher, Björn

    2015-01-01

    DNA damage has been long recognized as causal factor for cancer development. When erroneous DNA repair leads to mutations or chromosomal aberrations affecting oncogenes and tumor suppressor genes, cells undergo malignant transformation resulting in cancerous growth. Genetic defects can predispose to cancer: mutations in distinct DNA repair systems elevate the susceptibility to various cancer types. However, DNA damage not only comprises a root cause for cancer development but also continues to provide an important avenue for chemo- and radiotherapy. Since the beginning of cancer therapy, genotoxic agents that trigger DNA damage checkpoints have been applied to halt the growth and trigger the apoptotic demise of cancer cells. We provide an overview about the involvement of DNA repair systems in cancer prevention and the classes of genotoxins that are commonly used for the treatment of cancer. A better understanding of the roles and interactions of the highly complex DNA repair machineries will lead to important improvements in cancer therapy. PMID:25954303

  14. Automotive Body Repair Competencies.

    ERIC Educational Resources Information Center

    D'Armond, Jack; And Others

    Designed to provide a model curriculum and guidelines, this manual presents tasks that were identified by employers, employees, and teachers as important in a postsecondary auto body repair curriculum. The tasks are divided into ten major component areas of instruction: metalworking and fiberglass, painting, frame and suspension, glass and trim,…

  15. Getting Ready To Repair.

    ERIC Educational Resources Information Center

    Stryker, Rick

    2002-01-01

    Successful camp repairs require careful planning. Prioritize projects by program needs first, then by cost. Determine the cause of deterioration and address it. Build goodwill with suppliers by knowing what you want and giving them ample time to prepare estimates. Include labor costs, even for staff labor. A cost-estimate table for a sample…

  16. Single cell wound repair

    PubMed Central

    Abreu-Blanco, Maria Teresa; Verboon, Jeffrey M

    2011-01-01

    Cell wounding is a common event in the life of many cell types, and the capacity of the cell to repair day-to-day wear-and-tear injuries, as well as traumatic ones, is fundamental for maintaining tissue integrity. Cell wounding is most frequent in tissues exposed to high levels of stress. Survival of such plasma membrane disruptions requires rapid resealing to prevent the loss of cytosolic components, to block Ca2+ influx and to avoid cell death. In addition to patching the torn membrane, plasma membrane and cortical cytoskeleton remodeling are required to restore cell function. Although a general understanding of the cell wound repair process is in place, the underlying mechanisms of each step of this response are not yet known. We have developed a model to study single cell wound repair using the early Drosophila embryo. Our system combines genetics and live imaging tools, allowing us to dissect in vivo the dynamics of the single cell wound response. We have shown that cell wound repair in Drosophila requires the coordinated activities of plasma membrane and cytoskeleton components. Furthermore, we identified an unexpected role for E-cadherin as a link between the contractile actomyosin ring and the newly formed plasma membrane plug. PMID:21922041

  17. Aircraft Propeller Hub Repair

    SciTech Connect

    Muth, Thomas R.; Peter, William H.

    2015-02-13

    The team performed a literature review, conducted residual stress measurements, performed failure analysis, and demonstrated a solid state additive manufacturing repair technique on samples removed from a scrapped propeller hub. The team evaluated multiple options for hub repair that included existing metal buildup technologies that the Federal Aviation Administration (FAA) has already embraced, such as cold spray, high velocity oxy-fuel deposition (HVOF), and plasma spray. In addition the team helped Piedmont Propulsion Systems, LLC (PPS) evaluate three potential solutions that could be deployed at different stages in the life cycle of aluminum alloy hubs, in addition to the conventional spray coating method for repair. For new hubs, a machining practice to prevent fretting with the steel drive shaft was recommended. For hubs that were refurbished with some material remaining above the minimal material condition (MMC), a silver interface applied by an electromagnetic pulse additive manufacturing method was recommended. For hubs that were at or below the MMC, a solid state additive manufacturing technique using ultrasonic welding (UW) of thin layers of 7075 aluminum to the hub interface was recommended. A cladding demonstration using the UW technique achieved mechanical bonding of the layers showing promise as a viable repair method.

  18. Hydrocele repair - slideshow

    MedlinePlus

    ... anatomy URL of this page: //medlineplus.gov/ency/presentations/100163.htm Hydrocele repair - series—Normal anatomy To use the sharing features on this page, please enable JavaScript. Go to slide 1 out of 4 Go to slide 2 ...

  19. Eardrum repair - slideshow

    MedlinePlus

    ... anatomy URL of this page: //medlineplus.gov/ency/presentations/100015.htm Eardrum repair - series—Normal anatomy To use the sharing features on this page, please enable JavaScript. Go to slide 1 out of 4 Go to slide 2 ...

  20. Comprehensive Small Engine Repair.

    ERIC Educational Resources Information Center

    Hires, Bill; And Others

    This curriculum guide contains the basic information needed to repair all two- and four-stroke cycle engines. The curriculum covers four areas, each consisting of one or more units of instruction that include performance objectives, suggested activities for teacher and students, information sheets, assignment sheets, job sheets, visual aids,…

  1. Hiatal hernia repair - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100028.htm Hiatal hernia repair - series—Normal anatomy To use the sharing ... A.M. Editorial team. Related MedlinePlus Health Topics Hiatal Hernia A.D.A.M., Inc. is accredited by ...

  2. Basic Book Repair Methods.

    ERIC Educational Resources Information Center

    Schechter, Abraham A.

    This book addresses some common preservation techniques that invariably become necessary in library and archival collections of any size. The procedures are described in chronological sequence, and photographs show the techniques from the viewpoint of the person actually doing the work. The recommended repair methods can be accomplished using…

  3. Intestinal obstruction repair - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100116.htm Intestinal obstruction repair - series—Normal anatomy To use the sharing ... M. Editorial team. Related MedlinePlus Health Topics Adhesions Intestinal Obstruction A.D.A.M., Inc. is accredited by ...

  4. Giant Inguinal Herniae Managed by Primary Repair: A Case Series

    PubMed Central

    Anand, Madhur; Naku, Narang; Hajong, Debobratta; Singh, K Lenish

    2017-01-01

    Giant inguinal hernia are usually found in developing countries due to delay in seeking medical attention. The management of such hernias may sometimes require procedures to increase the intra-peritoneal capacity prior to the repair of the giant hernia. Otherwise patients may develop abdominal compartment syndrome leading to various unwanted complications. Primary repair of giant hernias are possible in some cases without having significant post-operative complications. In this present case series, we have managed a total of four patients of giant inguinal hernia by primary repair without much post-operative complications. PMID:28384934

  5. Lawn and Garden Equipment Repair.

    ERIC Educational Resources Information Center

    Hardway, Jack; And Others

    This publication is designed to supplement the Comprehensive Small Engine Rapair guide by covering in detail all aspects of lawn and garden equipment repair not included in general engine repair or the repair of other small engines. It consists of instructional materials for both teachers and students, written in terms of student performance using…

  6. Mismatch Repair Balances Leading and Lagging Strand DNA Replication Fidelity

    DTIC Science & Technology

    2012-10-11

    the most deleterious mismatches (i.e., indel mismatches). Within classes of similar deleterious potential (base-base mismatches), evolution has...spontaneous mutation rates and the sequencing of URA3 mutants were as previously described [2,13,21], save that MSH2 was deleted from haploid pol2

  7. Planning Barrier Free Libraries. A Guide for Renovation and Construction of Libraries Serving Blind and Physically Handicapped Readers.

    ERIC Educational Resources Information Center

    Moss, Charles A., Jr.

    Guidelines and sample designs for the construction or renovation of libraries providing services to blind and handicapped individuals are introduced by brief discussions of the responsibilities of members of the planning team, planning prerequisites, funding, and architect and site selection. Barrier-free designs are then suggested for the entry…

  8. The Renovation of Higher Education Governance in Vietnam and Its Impact on the Teaching Quality at Universities

    ERIC Educational Resources Information Center

    Pham, Thi Lan Phuong

    2012-01-01

    Significant changes in the policies of higher education in Vietnam have changed the structure and governance of the system since the mid-1990s. The most commonly agreed-upon positive outcome of the governance renovation process is that the formation of a nationwide quality assurance scheme, which is stimulated by accreditation, in the higher…

  9. 76 FR 40912 - Notice of Availability of the Draft Environmental Assessment for the Renovation of the Charles F...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-12

    ..., evaluates, and documents the effects of the GSA renovating the Charles F. Prevedel Building, including the replacement of mechanical systems to meet high performance green building standards, and making needed.... Prevedel Federal Building and Demolition of Federal Buildings 100, 101, and 102 at the Federal...

  10. Making the Most of What You've Got: Renovation of the Office of the Registrar, University of California, Davis.

    ERIC Educational Resources Information Center

    Babey, Evelyn R.

    An account of the renovation of the Office of the Registrar at the University of California, Davis, is presented. The task was to redesign existing space to utilize it more effectively; the ultimate goal was to better serve the university community. Placing units that were functionally interdependent in closer proximity and arranging high volume…

  11. Suture-Only Repair Versus Suture Anchor–Augmented Repair for Achilles Tendon Ruptures With a Short Distal Stump

    PubMed Central

    Boin, Michael A.; Dorweiler, Matthew A.; McMellen, Christopher J.; Gould, Gregory C.; Laughlin, Richard T.

    2017-01-01

    Background: Chronic noninsertional Achilles tendinosis can result in an acute Achilles tendon rupture with a short distal stump. In such tendon ruptures, there is a limited amount of adequate tissue that can hold suture, thus presenting a challenge for surgeons who elect to treat the rupture operatively. Hypothesis: Adding suture anchors to the repair construct may result in biomechanically stronger repairs compared with a suture-only technique. Study Design: Controlled laboratory study. Methods: Nine paired Achilles-calcaneus complexes were harvested from cadavers. An artificial Achilles rupture was created 2 cm proximal to the insertion on the calcaneus. One specimen from each cadaver was assigned to a suture-only or a suture anchor–augmented repair. The contralateral specimen of the same cadaver received the opposing repair. Cyclic testing was then performed at 10 to 100 N for 2000 cycles, and load-to-failure testing was performed at 0.2 mm/s. This was followed by analysis of repair displacement, gapping at repair site, peak load to failure, and failure mode. Results: The suture anchor–augmented repair exhibited a 116% lower displacement compared with the suture-only repair (mean ± SD, 1.54 ± 1.13 vs 3.33 ± 1.47 mm, respectively; P < .03). The suture anchor–augmented repair also exhibited a 45% greater load to failure compared with the suture-only repair (303.50 ± 102.81 vs 209.09 ± 48.12 N, respectively; P < .04). Conclusion: Suture anchor–augmented repairs performed on acute Achilles tendon ruptures with a short distal stump are biomechanically stronger than suture-only repairs. Clinical Relevance: Our results support the use of suture anchor–augmented repairs for a biomechanically stronger construct in Achilles tendon ruptures with a short distal stump. Biomechanically stronger repairs may lead to less tendon repair gapping and failure, increasing the ability to start early active rehabilitation protocols and thus improving patient outcomes

  12. 21 CFR 870.3710 - Pacemaker repair or replacement material.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Section 870.3710 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... adhesive, a sealant, a screw, a crimp, or any other material used to repair a pacemaker lead or to reconnect a pacemaker lead to a pacemaker pulse generator. (b) Classification. Class III (premarket...

  13. Laparoscopic repair of femoral hernia

    PubMed Central

    Yang, Xue-Fei

    2016-01-01

    Laparoscopic repair of inguinal hernia is mini-invasive and has confirmed effects. Femoral hernia could be repaired through the laparoscopic procedures for inguinal hernia. These procedures have clear anatomic view in the operation and preoperatively undiagnosed femoral hernia could be confirmed and treated. Lower recurrence ratio was reported in laparoscopic procedures compared with open procedures for repair of femoral hernia. The technical details of laparoscopic repair of femoral hernia, especially the differences to laparoscopic repair of inguinal hernia are discussed in this article. PMID:27826574

  14. Renovation activities during pregnancy induce a Th2 shift in fetal but not in maternal immune system.

    PubMed

    Herberth, Gunda; Herzog, Thomas; Hinz, Denise; Röder, Stefan; Schilde, Maik; Sack, Ulrich; Diez, Ulrike; Borte, Michael; Lehmann, Irina

    2013-06-01

    The aim of the present study was to investigate to which extent environmental influences like indoor renovation activities affect the immune system of mother and child during the gestation period. Within the LINA (Lifestyle and Environmental Factors and their Influence on Newborn Allergy risk) birth cohort study blood samples of mothers during pregnancy and cord blood samples were analyzed for concentrations of the Th1/Th2 cytokines IL-4, IL-5, IL-13, IFN-γ and IgE. Data on indoor renovation activities (painting, flooring and new furniture) were assessed with questionnaires. Data on cytokine blood concentrations and exposure variables were available for 422 mother/child pairs. Neonates, who were strongly affected by renovation activities (especially floor covering and new furniture) during pregnancy, had significantly higher concentrations of IL-4 and IL-5 in cord blood. Among the single activities, new furniture, particularly flake board, were associated with increased IL-4 levels. Elevated IL-4 levels were also observed in the cord blood of children whose mothers reported wall-to-wall carpeting. Among flooring, polyvinylchloride (PVC) showed the strongest effect with increased IL-5 concentrations. The Th1/Th2 imbalance towards Th2 at birth was related to allergic sensitization in children at the age of one. There were only few and negative associations between renovation activities and Th1/Th2 cytokine concentration in maternal blood. Our study shows that under similar exposure situations the fetal immune system is more susceptible to the influence of environmental factors, in particular renovation products (flake board, wall-to-wall carpets and PVC) compared to the maternal.

  15. Ecotoxicology: Lead

    USGS Publications Warehouse

    Scheuhammer, A.M.; Beyer, W.N.; Schmitt, C.J.; Jorgensen, Sven Erik; Fath, Brian D.

    2008-01-01

    Lead (Pb) is a naturally occurring metallic element; trace concentrations are found in all environmental media and in all living things. However, certain human activities, especially base metal mining and smelting; combustion of leaded gasoline; the use of Pb in hunting, target shooting, and recreational angling; the use of Pb-based paints; and the uncontrolled disposal of Pb-containing products such as old vehicle batteries and electronic devices have resulted in increased environmental levels of Pb, and have created risks for Pb exposure and toxicity in invertebrates, fish, and wildlife in some ecosystems.

  16. Minimally Invasive Spigelian Hernia Repair

    PubMed Central

    Baucom, Catherine; Nguyen, Quan D.; Hidalgo, Marco

    2009-01-01

    Introduction: Spigelian hernia is an uncommon ventral hernia characterized by a defect in the linea semilunaris. Repair of spigelian hernia has traditionally been accomplished via an open transverse incision and primary repair. The purpose of this article is to present 2 case reports of incarcerated spigelian hernia that were successfully repaired laparoscopically using Gortex mesh and to present a review of the literature regarding laparoscopic repair of spigelian hernias. Methods: Retrospective chart review and Medline literature search. Results: Two patients underwent laparoscopic mesh repair of incarcerated spigelian hernias. Both were started on a regular diet on postoperative day 1 and discharged on postoperative days 2 and 3. One patient developed a seroma that resolved without intervention. There was complete resolution of preoperative symptoms at the 12-month follow-up. Conclusion: Minimally invasive repair of spigelian hernias is an alternative to the traditional open surgical technique. Further studies are needed to directly compare the open and the laparoscopic repair. PMID:19660230

  17. 76 FR 4657 - Agency Information Collection Activities; Proposed Collection; Comment Request; TSCA Section 402...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-26

    ... Training and Certification, Accreditation and Standards for Lead-Based Paint Activities and Renovation, Repair, and Painting AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: In... Training and Certification, Accreditation and Standards for Lead-Based Paint Activities and...

  18. Tetraethyl lead

    Integrated Risk Information System (IRIS)

    Tetraethyl lead ; CASRN 78 - 00 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  19. Tenement House "Under The Golden Crown" In Wrocław - Renovation Of The Peculiar Monument

    NASA Astrophysics Data System (ADS)

    Kirschke, Krystyna

    2015-12-01

    Among the many historic buildings in Wroclaw, there is a property address Rynek 29 - Oławska 2, that in 1970 entered in the register of monuments as "a department store, earlier tenement house called "Under the Golden Crown". In the fact it was built in 1961 and it is neither a historical building nor department store. It is, spectacular example of creative retrospective, in the post-war reconstruction of Wroclaw. It has relict of medieval and Renaissance architecture, but the aboveground parts have a skeleton structure of commercial buildings from the early 20th century. In recent years, there is a problem with renovating such buildings. Recognition of these monuments has become a requirement now. Because only in this way in the future, in the course of modernization works, you will be able to avoid bad decisions and unforeseen situations.

  20. Report on renovation of "Shinagawa City Samezu Exercise Park " taking in the idea of Children

    NASA Astrophysics Data System (ADS)

    Ogawa, Susumu; Amma, Yoko

    When constructing and renovating parks in Shinagawa city, we collect various needs from local citizens by briefing, workshop and public comment. However, only adult people usually come to workshop. And there are few expression by children who are main users of parks. Then we made plan of a new park with children who play major roles in their future as part of town development. This plan is shown in Shinagawa city basics design which instituted in April 2008. And during construction of it we held observation tour with children to get more familiar to their parks. After finishing construction, we are going to maintain together with them by planting flowers etc. In this way, we cultivate mind that adults and children conduct town development together by system in which children can continuously take part in each step of making parks.

  1. Renovation of Nmij's 5 MN Hydraulic Amplification Type Force Standard Machine

    NASA Astrophysics Data System (ADS)

    Hayashi, Toshiyuki; Maejima, Hiroshi; Ueda, Kazunaga; Aokitsu, Mitsuharu

    The 5 MN hydraulic amplification type force standard machine was renovated by replacing its hydraulic pressure control system, measuring ram and cylinder. For re-evaluation of uncertainty of force amplification factor, diameters of the main and mearsuring rams and cylinders were re-measured. A programmable logic controller with a personal computer is used to control the weight motion and the valve actuation, to monitor various kinds of sensors output, and to record readings of a force transducer under calibration. Fluctuation of calibration force was suppressed by using a quartz-resonance type pressure gauge, and measurement repeatability was improved to some extent. However, there remains room for improvement to further stabilize the calibration force by modifying the measuring ram.

  2. Thermal Renovation of Buildings with the Use of Straw - European Experience

    NASA Astrophysics Data System (ADS)

    Golański, Michał

    2016-12-01

    The selection of building materials to a huge extent shapes building impact on the environment. In the era of widespread awareness of health problems arising from toxicity of chemical substances, healthy and safe materials of organic origin are even more important. The work discusses examples of the use of straw-bales in thermal retrofitting of buildings located in Austria, Czech Republic and Hungary. The experience of the practical applications of this material in renovations of buildings located in similar climatic conditions indicate that these solutions can be used successfully in Poland. The prevalence of this technology can make a significant contribution to reduction of gaseous emissions, waste, as well as the emission of noise, vibration radiation.

  3. LMHC/TWRS year 2000 equipment project renovation and contingency plan

    SciTech Connect

    ADAMS, M.R.

    1999-05-12

    A program has been completed to assess, renovate and document tank farm field equipment year 2000 compliance. A communication plan has also been prepared (see section 8.0). The objective of the program was to assure that no adverse effects occur in tank farm operations as a result of equipment malfunction due to the advent of year 2000. The purposes of this document are to: describe the process used to assess field equipment; document items found to be compliant; document items found to be non-compliant including options for making the equipment year 2000 functional and/or tolerant; describe location and management of field equipment year 2000 documentation; assess overall vulnerability of TWRS field equipment with regard to year 2000 problems and describe plans to communicate year 2000 equipment review results and corrective actions.

  4. Program of “Okayama Biomedical Engineering Professional” for Local Renovation

    NASA Astrophysics Data System (ADS)

    Hayashi, Kozaburo

    Okayama University of Science, Department of Biomedical Engineering, is promoting a program of “Okayama Biomedical Engineering Professional” for the development and renovation of biomedical industries in Okayama area. This is one of the programs of the national project on “Formation of the Center for the Production of Capable Persons for Local Renovation” , sponsored by the Ministry of Education, Culture, Sports, Science and Technology, Japan, and performed by the Japan Science and Technology Agency. The purpose of the program is to develop and educate specialists for the research, development, production, and marketing of biomedical devices and equipment in local industries in Okayama area. A half a year training for approximately 5 students from industries consists of 12 days of lectures and experiments, which is repeatedly provided for 5 years (approximately 45 students in total) .

  5. Energy Efficiency and Universal Design in Home Renovations - A Comparative Review.

    PubMed

    Kapedani, Ermal; Herssens, Jasmien; Verbeeck, Griet

    2016-01-01

    Policy and societal objectives indicate a large need for housing renovations that both accommodate lifelong living and significantly increase energy efficiency. However, these two areas of research are not yet examined in conjunction and this paper hypothesizes this as a missed opportunity to create better renovation concepts. The paper outlines a comparative review on research in Energy Efficiency and Universal Design in order to find the similarities and differences in both depth and breadth of knowledge. Scientific literature in the two fields reveals a disparate depth of knowledge in areas of theory, research approach, and degree of implementation in society. Universal Design and Energy Efficiency are part of a trajectory of expanding scope towards greater sustainability and, although social urgency has been a driver of the research intensity and approach in both fields, in energy efficiency there is an engineering, problem solving approach while Universal Design has a more sociological, user-focused one. These different approaches are reflected in the way home owners in Energy Efficiency research are viewed as consumers and decision makers whose drivers are studied, while Universal Design treats home owners as informants in the design process and studies their needs. There is an inherent difficulty in directly merging Universal Design and Energy Efficiency at a conceptual level because Energy Efficiency is understood as a set of measures, i.e. a product, while Universal Design is part of a (design) process. The conceptual difference is apparent in their implementation as well. Internationally energy efficiency in housing has been largely imposed through legislation, while legislation directly mandating Universal Design is either non-existent or it has an explicit focus on accessibility. However, Energy Efficiency and Universal Design can be complementary concepts and, even though it is more complex than expected, the combination offers possibilities to advance

  6. Rapid Runway Repair Study.

    DTIC Science & Technology

    This report describes a series of tests to evaluate a system for rapidly repairing airfield pavement using polymer concrete (synthetic polymer plus...aggregate), thermally cured by microwave power. The technique, developed by the Syracuse University Research Corporation (SURC) for highway...maintenance, uses a truck-mounted 50-kilowatt microwave generator to irradiate areas patched with polymer concrete . Test results indicate that the polymer

  7. Mystery of DNA repair: the role of the MRN complex and ATM kinase in DNA damage repair.

    PubMed

    Czornak, Kamila; Chughtai, Sanaullah; Chrzanowska, Krystyna H

    2008-01-01

    Genomes are subject to a number of exogenous or endogenous DNA-damaging agents that cause DNA double-strand breaks (DSBs). These critical DNA lesions can result in cell death or a wide variety of genetic alterations, including deletions, translocations, loss of heterozygosity, chromosome loss, or chromosome fusions, which enhance genome instability and can trigger carcinogenesis. The cells have developed an efficient mechanism to cope with DNA damages by evolving the DNA repair machinery. There are 2 major DSB repair mechanisms: nonhomologous end joining (NHEJ) and homologous recombination (HR). One element of the repair machinery is the MRN complex, consisting of MRE11, RAD50 and NBN (previously described as NBS1), which is involved in DNA replication, DNA repair, and signaling to the cell cycle checkpoints. A number of kinases, like ATM (ataxia-telangiectasia mutated), ATR (ataxia-telangiectasia and Rad-3-related), and DNA PKcs (DNA protein kinase catalytic subunit), phosphorylate various protein targets in order to repair the damage. If the damage cannot be repaired, they direct the cell to apoptosis. The MRN complex as well as repair kinases are also involved in telomere maintenance and genome stability. The dysfunction of particular elements involved in the repair mechanisms leads to genome instability disorders, like ataxia telangiectasia (A-T), A-T-like disorder (ATLD) and Nijmegen breakage syndrome (NBS). The mutated genes responsible for these disorders code for proteins that play key roles in the process of DNA repair. Here we present a detailed review of current knowledge on the MRN complex, kinases engaged in DNA repair, and genome instability disorders.

  8. The multifaceted influence of histone deacetylases on DNA damage signalling and DNA repair

    PubMed Central

    Roos, Wynand Paul; Krumm, Andrea

    2016-01-01

    Histone/protein deacetylases play multiple roles in regulating gene expression and protein activation and stability. Their deregulation during cancer initiation and progression cause resistance to therapy. Here, we review the role of histone deacetylases (HDACs) and the NAD+ dependent sirtuins (SIRTs) in the DNA damage response (DDR). These lysine deacetylases contribute to DNA repair by base excision repair (BER), nucleotide excision repair (NER), mismatch repair (MMR), non-homologous end joining (NHEJ), homologous recombination (HR) and interstrand crosslink (ICL) repair. Furthermore, we discuss possible mechanisms whereby these histone/protein deacetylases facilitate the switch between DNA double-strand break (DSB) repair pathways, how SIRTs play a central role in the crosstalk between DNA repair and cell death pathways due to their dependence on NAD+, and the influence of small molecule HDAC inhibitors (HDACi) on cancer cell resistance to genotoxin based therapies. Throughout the review, we endeavor to identify the specific HDAC targeted by HDACi leading to therapy sensitization. PMID:27738139

  9. Conceptual design report: Nuclear materials storage facility renovation. Part 5, Structural/seismic investigation. Section B, Renovation calculations/supporting data

    SciTech Connect

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections. It is organized into seven parts. This document, Part V, Section B - Structural/Seismic Information provides a description of the seismic and structural analyses performed on the NMSF and their results.

  10. Who Leads China's Leading Universities?

    ERIC Educational Resources Information Center

    Huang, Futao

    2017-01-01

    This study attempts to identify the major characteristics of two different groups of institutional leaders in China's leading universities. The study begins with a review of relevant literature and theory. Then, there is a brief introduction to the selection of party secretaries, deputy secretaries, presidents and vice presidents in leading…

  11. Repair of DNA Double-Strand Breaks in Heterochromatin

    PubMed Central

    Watts, Felicity Z.

    2016-01-01

    DNA double-strand breaks (DSBs) are among the most damaging lesions in DNA, since, if not identified and repaired, they can lead to insertions, deletions or chromosomal rearrangements. DSBs can be in the form of simple or complex breaks, and may be repaired by one of a number of processes, the nature of which depends on the complexity of the break or the position of the break within the chromatin. In eukaryotic cells, nuclear DNA is maintained as either euchromatin (EC) which is loosely packed, or in a denser form, much of which is heterochromatin (HC). Due to the less accessible nature of the DNA in HC as compared to that in EC, repair of damage in HC is not as straightforward as repair in EC. Here we review the literature on how cells deal with DSBs in HC. PMID:27999260

  12. p53 in the DNA damage repair process

    PubMed Central

    Williams, Ashley B.; Schumacher, Björn

    2016-01-01

    The cells in the human body are continuously challenged by a variety of genotoxic attacks. Erroneous repair of the DNA can lead to mutations and chromosomal aberrations that can alter the functions of tumor suppressor genes or oncogenes, thus causing cancer development. As a central tumor suppressor, p53 guards the genome by orchestrating a variety of DNA damage response (DDR) mechanisms. Already early in metazoan evolution, p53 started controlling the apoptotic demise of genomically compromised cells. p53 plays a prominent role as a facilitator of DNA repair by halting the cell cycle to allow time for the repair machineries to restore genome stability. In addition, p53 took on diverse roles to also directly impact the activity of various DNA repair systems. It thus appears as if p53 is multitasking in protecting from cancer development by maintaining genome stability. PMID:27048304

  13. Interplay between DNA repair and inflammation, and the link to cancer

    PubMed Central

    Kidane, Dawit; Chae, Wook Jin; Czochor, Jennifer; Eckert, Kristin A.; Glazer, Peter M.; Bothwell, Alfred L. M.; Sweasy, Joann B.

    2015-01-01

    DNA damage and repair are linked to cancer. DNA damage that is induced endogenously or from exogenous sources has the potential to result in mutations and genomic instability if not properly repaired, eventually leading to cancer. Inflammation is also linked to cancer. Reactive oxygen and nitrogen species (RONs) produced by inflammatory cells at sites of infection can induce DNA damage. RONs can also amplify inflammatory responses, leading to increased DNA damage. Here, we focus on the links between DNA damage, repair, and inflammation, as they relate to cancer. We examine the interplay between chronic inflammation, DNA damage and repair and review recent findings in this rapidly emerging field, including the links between DNA damage and the innate immune system, and the roles of inflammation in altering the microbiome, which subsequently leads to the induction of DNA damage in the colon. Mouse models of defective DNA repair and inflammatory control are extensively reviewed, including treatment of mouse models with pathogens, which leads to DNA damage. The roles of microRNAs in regulating inflammation and DNA repair are discussed. Importantly, DNA repair and inflammation are linked in many important ways, and in some cases balance each other to maintain homeostasis. The failure to repair DNA damage or to control inflammatory responses has the potential to lead to cancer. PMID:24410153

  14. Evaluation of Lead Release in a Simulated Lead-Free Premise Plumbing System Using a Sequential Sampling Approach

    PubMed Central

    Ng, Ding-Quan; Lin, Yi-Pin

    2016-01-01

    In this pilot study, a modified sampling protocol was evaluated for the detection of lead contamination and locating the source of lead release in a simulated premise plumbing system with one-, three- and seven-day stagnation for a total period of 475 days. Copper pipes, stainless steel taps and brass fittings were used to assemble the “lead-free” system. Sequential sampling using 100 mL was used to detect lead contamination while that using 50 mL was used to locate the lead source. Elevated lead levels, far exceeding the World Health Organization (WHO) guideline value of 10 µg·L−1, persisted for as long as five months in the system. “Lead-free” brass fittings were identified as the source of lead contamination. Physical disturbances, such as renovation works, could cause short-term spikes in lead release. Orthophosphate was able to suppress total lead levels below 10 µg·L−1, but caused “blue water” problems. When orthophosphate addition was ceased, total lead levels began to spike within one week, implying that a continuous supply of orthophosphate was required to control total lead levels. Occasional total lead spikes were observed in one-day stagnation samples throughout the course of the experiments. PMID:26927154

  15. Evaluation of Lead Release in a Simulated Lead-Free Premise Plumbing System Using a Sequential Sampling Approach.

    PubMed

    Ng, Ding-Quan; Lin, Yi-Pin

    2016-02-27

    In this pilot study, a modified sampling protocol was evaluated for the detection of lead contamination and locating the source of lead release in a simulated premise plumbing system with one-, three- and seven-day stagnation for a total period of 475 days. Copper pipes, stainless steel taps and brass fittings were used to assemble the "lead-free" system. Sequential sampling using 100 mL was used to detect lead contamination while that using 50 mL was used to locate the lead source. Elevated lead levels, far exceeding the World Health Organization (WHO) guideline value of 10 µg · L(-1), persisted for as long as five months in the system. "Lead-free" brass fittings were identified as the source of lead contamination. Physical disturbances, such as renovation works, could cause short-term spikes in lead release. Orthophosphate was able to suppress total lead levels below 10 µg · L(-1), but caused "blue water" problems. When orthophosphate addition was ceased, total lead levels began to spike within one week, implying that a continuous supply of orthophosphate was required to control total lead levels. Occasional total lead spikes were observed in one-day stagnation samples throughout the course of the experiments.

  16. Measurement of DNA repair deficiency in workers exposed to benzene

    SciTech Connect

    Hallberg, L.M.; Au, W.W.; El Zein, R.; Grossman, L.

    1996-05-01

    We hypothesize that chronic exposure to environmental toxicants can induce genetic damage causing DNA repair deficiencies and leading to the postulated mutator phenotype of carcinogenesis. To test our hypothesis, a host cell reactivation (HCR) assay was used in which pCMVcat plasmids were damaged with UV light (175, 350 J/m{sup 2} UV light), inactivating the chloramphenicol acetyltransferase reporter gene, and then transfected into lymphocytes. Transfected lymphocytes were therefore challenged to repair the damaged plasmids, reactivating the reporter gene. Xeroderma pigmentosum (XP) and Gaucher cell lines were used as positive and negative controls for the HCR assay. The Gaucher cell line repaired normally but XP cell lines demonstrated lower repair activity. Additionally, the repair activity of the XP heterozygous cell line showed intermediate repair compared to the homozygous XP and Gaucher cells. We used HCR to measure the effects of benzene exposure on 12 exposed and 8 nonexposed workers from a local benzene plant. Plasmids 175 J/m{sup 2} and 350 J/m{sup 2} were repaired with a mean frequency of 66% and 58%, respectively, in control workers compared to 71% and 62% in exposed workers. Conversely, more of the exposed workers were grouped into the reduced repair category than controls. These differences in repair capacity between exposed and control workers were, however, not statistically significant. The lack of significant differences between the exposed and control groups may be due to extremely low exposure to benzene (<0.3 ppm), small population size, or a lack of benzene genotoxicity at these concentrations. These results are consistent with a parallel hprt gene mutation assay. 26 refs., 4 figs., 2 tabs.

  17. Emergent properties of neural repair: elemental biology to therapeutic concepts

    PubMed Central

    2016-01-01

    Stroke is the leading cause of adult disability. The past decade has seen advances in basic science research of neural repair in stroke. The brain forms new connections after stroke, which have a causal role in recovery of function. Brain progenitors, including neuronal and glial progenitors, respond to stroke and initiate a partial formation of new neurons and glial cells. The molecular systems that underlie axonal sprouting, neurogenesis, and gliogenesis after stroke have recently been identified. Importantly, tractable drug targets exist within these molecular systems that might stimulate tissue repair. These basic science advances have taken the field to its first scientific milestone; the elemental principles of neural repair in stroke have been identified. The next stages in this field involve understanding how these elemental principles of recovery interact in the dynamic cellular systems of the repairing brain. Emergent principles arise out of the interaction of the fundamental or elemental principles in a system. In neural repair, the elemental principles of brain reorganization after stroke interact to generate higher order and distinct concepts of regenerative brain niches in cellular repair, neuronal networks in synaptic plasticity, and the distinction of molecular systems of neuroregeneration. Many of these emergent principles directly guide the development of new therapies, such as the necessity for spatial and temporal control in neural repair therapy delivery and the overlap of cancer and neural repair mechanisms. This review discusses the emergent principles of neural repair in stroke as they relate to scientific and therapeutic concepts in this field. Ann Neurol 2016;79:895–906 PMID:27043816

  18. The Interaction Between Prenatal Exposure to Home Renovation and Reactive Oxygen Species Genes in Cord Blood IgE Response is Modified by Maternal Atopy

    PubMed Central

    Yu, Jinho; Shin, Youn Ho; Kim, Kyung Won; Suh, Dong In; Yu, Ho-Sung; Kang, Mi-Jin; Lee, Kyung-Shin; Hong, Seo Ah; Choi, Kil Yong; Lee, Eun; Yang, Song-I; Seo, Ju-Hee; Kim, Byoung-Ju; Kim, Hyo-Bin; Lee, So-Yeon; Choi, Suk-Joo; Oh, Soo-Young; Kwon, Ja-Young; Lee, Kyung-Ju; Park, Hee Jin; Lee, Pil Ryang; Won, Hye-Sung

    2016-01-01

    Purpose Although home renovation exposure during childhood has been identified as a risk factor for the development of allergy, there is limited information on the association between prenatal exposure to home renovation and cord blood (CB) IgE response. The aims of this study were to identify the effect of prenatal exposure to home renovation on CB IgE levels, and to investigate whether this exposure interacts with neonatal genes and whether the effect can be modified by maternal atopy. Methods This study included 1,002 mother-neonate pairs from the COhort for Childhood Origin of Asthma and allergic diseases (COCOA). Prenatal environmental factors were collected using a questionnaire. The levels of CB IgE were measured by the ImmunoCAP system, and DNA was extracted from CB. Results Exposure to home renovation during the prenatal period was associated with significantly higher levels of CB IgE only in neonates from atopic mothers, and the effect of renovation exposure on CB IgE levels persisted from 31 months before birth. Furthermore, prenatal exposure to home renovation increased the risk of CB IgE response interacting with polymorphisms of NRF2 and GSTP1 genes only in neonates from atopic mothers. Conclusions Maternal atopy modified the effect of prenatal exposure to home renovation on CB serum IgE response as well as the interaction between the exposure and neonatal genes involved in the oxidative stress pathway. These findings suggest that the genetically susceptible offspring of atopic mothers may be more vulnerable to the effect of prenatal exposure to home renovation on the development of allergy. PMID:26540500

  19. DNA repair: Dynamic defenders against cancer and aging

    SciTech Connect

    Fuss, Jill O.; Cooper, Priscilla K.

    2006-04-01

    You probably weren't thinking about your body's cellular DNA repair systems the last time you sat on the beach in the bright sunshine. Fortunately, however, while you were subjecting your DNA to the harmful effects of ultraviolet light, your cells were busy repairing the damage. The idea that our genetic material could be damaged by the sun was not appreciated in the early days of molecular biology. When Watson and Crick discovered the structure of DNA in 1953 [1], it was assumed that DNA is fundamentally stable since it carries the blueprint of life. However, over 50 years of research have revealed that our DNA is under constant assault by sunlight, oxygen, radiation, various chemicals, and even our own cellular processes. Cleverly, evolution has provided our cells with a diverse set of tools to repair the damage that Mother Nature causes. DNA repair processes restore the normal nucleotide sequence and DNA structure of the genome after damage [2]. These responses are highly varied and exquisitely regulated. DNA repair mechanisms are traditionally characterized by the type of damage repaired. A large variety of chemical modifications can alter normal DNA bases and either lead to mutations or block transcription if not repaired, and three distinct pathways exist to remove base damage. Base excision repair (BER) corrects DNA base alterations that do not distort the overall structure of the DNA helix such as bases damaged by oxidation resulting from normal cellular metabolism. While BER removes single damaged bases, nucleotide excision repair (NER) removes short segments of nucleotides (called oligonucleotides) containing damaged bases. NER responds to any alteration that distorts the DNA helix and is the mechanism responsible for repairing bulky base damage caused by carcinogenic chemicals such as benzo [a]pyrene (found in cigarette smoke and automobile exhaust) as well as covalent linkages between adjacent pyrimidine bases resulting from the ultraviolet (UV

  20. DNA repair in cultured keratinocytes

    SciTech Connect

    Liu, S.C.; Parsons, S.; Hanawalt, P.C.

    1983-07-01

    Most of our understanding of DNA repair mechanisms in human cells has come from the study of these processes in cultured fibroblasts. The unique properties of keratinocytes and their pattern of terminal differentiation led us to a comparative examination of their DNA repair properties. The relative repair capabilities of the basal cells and the differentiated epidermal keratinocytes as well as possible correlations of DNA repair capacity with respect to age of the donor have been examined. In addition, since portions of human skin are chronically exposed to sunlight, the repair response to ultraviolet (UV) irradiation (254 nm) when the cells are conditioned by chronic low-level UV irradiation has been assessed. The comparative studies of DNA repair in keratinocytes from infant and aged donors have revealed no significant age-related differences for repair of UV-induced damage to DNA. Sublethal UV conditioning of cells from infant skin had no appreciable effect on either the repair or normal replication response to higher, challenge doses of UVL. However, such conditioning resulted in attenuated repair in keratinocytes from adult skin after UV doses above 25 J/m2. In addition, a surprising enhancement in replication was seen in conditioned cells from adult following challenge UV doses.

  1. Stimulating endogenous cardiac repair

    PubMed Central

    Finan, Amanda; Richard, Sylvain

    2015-01-01

    The healthy adult heart has a low turnover of cardiac myocytes. The renewal capacity, however, is augmented after cardiac injury. Participants in cardiac regeneration include cardiac myocytes themselves, cardiac progenitor cells, and peripheral stem cells, particularly from the bone marrow compartment. Cardiac progenitor cells and bone marrow stem cells are augmented after cardiac injury, migrate to the myocardium, and support regeneration. Depletion studies of these populations have demonstrated their necessary role in cardiac repair. However, the potential of these cells to completely regenerate the heart is limited. Efforts are now being focused on ways to augment these natural pathways to improve cardiac healing, primarily after ischemic injury but in other cardiac pathologies as well. Cell and gene therapy or pharmacological interventions are proposed mechanisms. Cell therapy has demonstrated modest results and has passed into clinical trials. However, the beneficial effects of cell therapy have primarily been their ability to produce paracrine effects on the cardiac tissue and recruit endogenous stem cell populations as opposed to direct cardiac regeneration. Gene therapy efforts have focused on prolonging or reactivating natural signaling pathways. Positive results have been demonstrated to activate the endogenous stem cell populations and are currently being tested in clinical trials. A potential new avenue may be to refine pharmacological treatments that are currently in place in the clinic. Evidence is mounting that drugs such as statins or beta blockers may alter endogenous stem cell activity. Understanding the effects of these drugs on stem cell repair while keeping in mind their primary function may strike a balance in myocardial healing. To maximize endogenous cardiac regeneration, a combination of these approaches could ameliorate the overall repair process to incorporate the participation of multiple cellular players. PMID:26484341

  2. Renovating Charity Hospital or building a new hospital in post-Katrina New Orleans: economic rationale versus political will.

    PubMed

    Leleu, Hervé; Moises, James; Valdmanis, Vivian Grace

    2013-02-01

    Since September 2005, Charity Hospital of New Orleans has been closed due to Hurricane Katrina. A debate following the closing arose about whether this public hospital should be renovated or a new medical center affiliated with the Louisiana State University should be built. Using academic literature, government statistics, and popular press reports, we describe the economic implications that support the view that Charity Hospital should have been renovated. We also address why this policy was not pursued by demonstrating the influence politics and individual stakeholders (specifically, Louisiana State University) had on the eventual policy pursued. In this commentary we also note the political identity movement away from public-sector provision of services to private-sector interests.

  3. Final Environmental Assessment: Military Family Housing Demolition, Construction, Renovation, and Leasing Program at Holloman AFB, New Mexico

    DTIC Science & Technology

    2006-03-01

    thermic , having a mean annual temperature between 59 degrees Fahrenheit CF) and 72°F; the soil moisture regime is aridic (dry) (SCS 1980). Within...Nonfriable ACBMs, such as floor tiles, are considered to be nonhazardous, except during removal and/ or renovation, and are not subject to...containing ACBM include floor tile, adhesive, window caulk, and roofing material. AFI 32-1052, Facilities Asbestos Management, requires that when

  4. Environmental Assessment for the Renovation of the Former Steam Plant St Clair County Scott Air Force Base, Illinois

    DTIC Science & Technology

    2005-09-01

    measures to prevent erosion during construction would be implemented and could include the installation of staked straw bales , sedimentation basins, and...Final Environmental Assessment for Renovation of the Former Steam Plant 3-3 FINAL combustion services, stationary internal combustion engines...Monoxide Nitrogen Oxides Particulate Matter Sulfur Oxides Volatile Organic Compounds External Combustion Sources 2.24 2.82 0.216 0.017 0.156

  5. A Novel Way Of Repair Of Insulation Breaks During Pacemaker Generator Replacement

    PubMed Central

    Manzoor Ali, Syed; Iqbal, Khurshid; Tramboo, Nisar A; Lone, Aijaz A; Kaul, Suresh; Kaul, Neelam; Hafiz, Imran

    2009-01-01

    Minor abrasions can occur while mobilising old lead during pacemaker generator replacement necesittating placement of additional lead adding to the financial burden and junk in heart. We describe a novel way of repair of old pacemaker lead preventing additional lead placement. PMID:19763196

  6. Moving to Google Cloud: Renovation of Global Borehole Temperature Database for Climate Research

    NASA Astrophysics Data System (ADS)

    Xiong, Y.; Huang, S.

    2013-12-01

    Borehole temperature comprises an independent archive of information on climate change which is complementary to the instrumental and other proxy climate records. With support from the international geothermal community, a global database of borehole temperatures has been constructed for the specific purpose of the study on climate change. Although this database has become an important data source in climate research, there are certain limitations partially because the framework of the existing borehole temperature database was hand-coded some twenty years ago. A database renovation work is now underway to take the advantages of the contemporary online database technologies. The major intended improvements include 1) dynamically linking a borehole site to Google Earth to allow for inspection of site specific geographical information; 2) dynamically linking an original key reference of a given borehole site to Google Scholar to allow for a complete list of related publications; and 3) enabling site selection and data download based on country, coordinate range, and contributor. There appears to be a good match between the enhancement requirements for this database and the functionalities of the newly released Google Fusion Tables application. Google Fusion Tables is a cloud-based service for data management, integration, and visualization. This experimental application can consolidate related online resources such as Google Earth, Google Scholar, and Google Drive for sharing and enriching an online database. It is user friendly, allowing users to apply filters and to further explore the internet for additional information regarding the selected data. The users also have ways to map, to chart, and to calculate on the selected data, and to download just the subset needed. The figure below is a snapshot of the database currently under Google Fusion Tables renovation. We invite contribution and feedback from the geothermal and climate research community to make the

  7. Industrial motor repair in the United States

    SciTech Connect

    Schueler, V.; Leistner, P.; Douglass, J.

    1994-09-01

    This report characterizes the motor repair industry in the United States; summarizes current motor repair and testing practice; and identifies barriers to energy motor repair practice and recommends strategies for overcoming those barriers.

  8. 40 CFR 63.1005 - Leak repair.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... emissions of purged material resulting from immediate repair would be greater than the fugitive emissions likely to result from delay of repair, and (ii) When repair procedures are effected, the purged...

  9. 40 CFR 63.1024 - Leak repair.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... purged material resulting from immediate repair would be greater than the fugitive emissions likely to result from delay of repair, and (ii) When repair procedures are effected, the purged material...

  10. Membrane Repair: Mechanisms and Pathophysiology

    PubMed Central

    Cooper, Sandra T.; McNeil, Paul L.

    2015-01-01

    Eukaryotic cells have been confronted throughout their evolution with potentially lethal plasma membrane injuries, including those caused by osmotic stress, by infection from bacterial toxins and parasites, and by mechanical and ischemic stress. The wounded cell can survive if a rapid repair response is mounted that restores boundary integrity. Calcium has been identified as the key trigger to activate an effective membrane repair response that utilizes exocytosis and endocytosis to repair a membrane tear, or remove a membrane pore. We here review what is known about the cellular and molecular mechanisms of membrane repair, with particular emphasis on the relevance of repair as it relates to disease pathologies. Collective evidence reveals membrane repair employs primitive yet robust molecular machinery, such as vesicle fusion and contractile rings, processes evolutionarily honed for simplicity and success. Yet to be fully understood is whether core membrane repair machinery exists in all cells, or whether evolutionary adaptation has resulted in multiple compensatory repair pathways that specialize in different tissues and cells within our body. PMID:26336031

  11. Instructional Guide for Autobody Repair.

    ERIC Educational Resources Information Center

    Virginia Polytechnic Inst. and State Univ., Blacksburg. Dept. of Education.

    The curriculum guide was developed to serve as a statewide model for Virginia auto body repair programs. The guide is designed to 1,080 hours of instruction in eleven blocks: orientation, introduction, welding and cutting, techniques of shaping metal, body filler and fiberglass repairs, body and frame, removing and replacing damaged parts, basic…

  12. Major Appliance Repair. Teacher Edition.

    ERIC Educational Resources Information Center

    Smreker, Eugene; Calvert, King

    This module is a comprehensive text on basic appliance repair, designed to prepare students for entry-level jobs in this growing field. Ensuring a firm grounding in electrical knowledge, the module contains 13 instructional units that cover the following topics: (1) major appliance repair orientation; (2) safety and first aid; (3) fundamentals of…

  13. Pipe inspection and repair system

    NASA Technical Reports Server (NTRS)

    Schempf, Hagen (Inventor); Mutschler, Edward (Inventor); Chemel, Brian (Inventor); Boehmke, Scott (Inventor); Crowley, William (Inventor)

    2004-01-01

    A multi-module pipe inspection and repair device. The device includes a base module, a camera module, a sensor module, an MFL module, a brush module, a patch set/test module, and a marker module. Each of the modules may be interconnected to construct one of an inspection device, a preparation device, a marking device, and a repair device.

  14. Small Crater Expedient Repair Test.

    DTIC Science & Technology

    1980-08-01

    Crater 4, the timed polymer-concrete repair, failed due to material quality. An estimated 20 of the 464 bags of SilikalO lacked the benzoyl ... peroxide catalyst required for polymerization. As a result of this omission, several areas of the repair failed to harden, causing the unpolymerized mateiial

  15. Rethinking transcription coupled DNA repair.

    PubMed

    Kamarthapu, Venu; Nudler, Evgeny

    2015-04-01

    Nucleotide excision repair (NER) is an evolutionarily conserved, multistep process that can detect a wide variety of DNA lesions. Transcription coupled repair (TCR) is a subpathway of NER that repairs the transcribed DNA strand faster than the rest of the genome. RNA polymerase (RNAP) stalled at DNA lesions mediates the recruitment of NER enzymes to the damage site. In this review we focus on a newly identified bacterial TCR pathway in which the NER enzyme UvrD, in conjunction with NusA, plays a major role in initiating the repair process. We discuss the tradeoff between the new and conventional models of TCR, how and when each pathway operates to repair DNA damage, and the necessity of pervasive transcription in maintaining genome integrity.

  16. Laparoscopic repair of recurrent hernias.

    PubMed

    Felix, E L; Michas, C A; McKnight, R L

    1995-02-01

    The purpose of this study was to evaluate the results of a laparoscopic approach to recurrent inguinal hernia repair which dissected the entire inguinal floor and repaired all potential areas of recurrence without producing tension. Both a transabdominal preperitoneal and a totally extraperitoneal laparoscopic approach were utilized. Ninety recurrent hernias were repaired in 81 patients. The patients had 26 indirect, 36 direct, and 26 pantaloon recurrent hernias of which eight had a femoral component. In all but one patient the primary operations were open anterior repairs. The median follow-up was 14 months, ranging from 1 to 28 months. Patients returned to normal activities in an average of 1 week. The only recurrence observed was in the one patient whose primary repair was laparoscopic. When the entire inguinal floor of the recurrent hernia was redissected and buttressed with mesh, early recurrence was eliminated and recovery was shortened.

  17. Purification of mammalian DNA repair protein XRCC1

    SciTech Connect

    Chen, I.

    1995-11-01

    Malfunctioning DNA repair systems lead to cancer mutations, and cell death. XRCC1 (X-ray Repair Cross Complementing) is a human DNA repair gene that has been found to fully correct the x-ray repair defect in Chinese hamster ovary (CHO) cell mutant EM9. The corresponding protein (XRCC1) encoded by this gene has been linked to a DNA repair pathway known as base excision repair, and affects the activity of DNA ligase III. Previously, an XRCC1 cDNA minigene (consisting of the uninterrupted coding sequence for XRCC1 protein followed by a decahistidine tag) was constructed and cloned into vector pET-16b for the purpose of: (1) overproduction of XRCC1 in both prokaryotic and eukaryotic cells; and (2) to facilitate rapid purification of XRCC1 from these systems. A vector is basically a DNA carrier that allows recombinant protein to be cloned and overexpressed in host cells. In this study, XRCC1 protein was overexpressed in E. coli and purified by immobilized metal affinity chromatography. Currently, the XRCC1 minigene is being inserted into a new vector [pET-26b(+)] in hopes to increase overexpression and improve purification. Once purified XRCC1 can be crystallized for structural studies, or studied in vitro for its biological function.

  18. Revision of testing criteria for air cleaning unit of renovated APR-1000 and APR-1400 NPPS.

    PubMed

    Jeong, Seung-Young

    2011-07-01

    Designing Air Cleaning Units (ACU) of an Engineered Safety Feature and normal atmosphere clean-up system at the renovated APR-1000 and APR-1400 NPP, and fuel cycle facilities in Korea, is required to meet the standards of ASME AG-1 (1997), ASME N509/N510 (1989) and KEPIC-MH (2001) to enhance the removal efficiency of aerosols and particulates from the effluents. The revised ACU testing criteria are allowed to use alternative challenge agents of the dioctyl phthalate and Refrigerant-11 for in situ testing of high efficiency particulate air filters and adsorption banks. The operability testing time of engineered safety feature (ESF) trains was changed from 10 h to 15 min. The activated carbon in adsorption banks should undergo laboratory tests at a temperature of 30 °C and relative humidity 95 %. The removal criteria of methyl iodide should be over 99.5 % for ESF and 99 % for normal systems. This paper provides the background of the changed criteria for designing and testing of the ACU system in nuclear facilities.

  19. Thermal and flow analyses of the Nuclear Materials Storage Facility Renovation Title I 60% design

    SciTech Connect

    Knight, T.D.; Steinke, R.G.; Mueller, C.

    1998-08-01

    The authors are continuing to use the computational fluid dynamics code CFX-4.2 to evaluate the steady-state thermal-hydraulic conditions in the Nuclear Material Storage Facility Renovation Title 1 60% Design. The analyses build on those performed for the 30% design. They have run an additional 9 cases to investigate both the performance of the passive vault and of an individual drywell. These cases investigated the effect of wind on the inlet tower, the importance of resolving boundary layers in the analyses, and modifications to the porous-medium approach used in the earlier analyses to represent better the temperature fields resulting from the detailed modeling of the boundary layers. The difference between maximum temperatures of the bulk air inside the vault for the two approaches is small. They continued the analyses of the wind effects around the inflector fixture, a canopy and cruciform device, on the inlet tower by running a case with the wind blowing diagonally across the inflector. The earlier analyses had investigated a wind that was blowing parallel to one set of vanes on the inflector. Several subcases for these analyses investigated coupling the analysis to the facility analysis and design changes for the inflector.

  20. Renovating the Pyramid of Needs: Contemporary Extensions Built Upon Ancient Foundations

    PubMed Central

    Kenrick, Douglas T.; Griskevicius, Vladas; Neuberg, Steven L.; Schaller, Mark

    2011-01-01

    Maslow’s pyramid of human needs, proposed in 1943, has been one of the most cognitively contagious ideas in the behavioral sciences. Anticipating later evolutionary views of human motivation and cognition, Maslow viewed human motives as based in innate and universal predispositions. We revisit the idea of a motivational hierarchy in light of theoretical developments at the interface of evolutionary biology, anthropology, and psychology. After considering motives at three different levels of analysis, we argue that the basic foundational structure of the pyramid is worth preserving, but that it should be buttressed with a few architectural extensions. By adding a contemporary design feature, connections between fundamental motives and immediate situational threats and opportunities should be highlighted. By incorporating a classical element, these connections can be strengthened by anchoring the hierarchy of human motives more firmly in the bedrock of modern evolutionary theory. We propose a renovated hierarchy of fundamental motives that serves as both an integrative framework and a generative foundation for future empirical research. PMID:21874133

  1. Renovating the Pyramid of Needs: Contemporary Extensions Built Upon Ancient Foundations.

    PubMed

    Kenrick, Douglas T; Griskevicius, Vladas; Neuberg, Steven L; Schaller, Mark

    2010-05-01

    Maslow's pyramid of human needs, proposed in 1943, has been one of the most cognitively contagious ideas in the behavioral sciences. Anticipating later evolutionary views of human motivation and cognition, Maslow viewed human motives as based in innate and universal predispositions. We revisit the idea of a motivational hierarchy in light of theoretical developments at the interface of evolutionary biology, anthropology, and psychology. After considering motives at three different levels of analysis, we argue that the basic foundational structure of the pyramid is worth preserving, but that it should be buttressed with a few architectural extensions. By adding a contemporary design feature, connections between fundamental motives and immediate situational threats and opportunities should be highlighted. By incorporating a classical element, these connections can be strengthened by anchoring the hierarchy of human motives more firmly in the bedrock of modern evolutionary theory. We propose a renovated hierarchy of fundamental motives that serves as both an integrative framework and a generative foundation for future empirical research.

  2. Wound repair in Pocillopora

    USGS Publications Warehouse

    Rodríguez-Villalobos, Jenny Carolina; Work, Thierry M.; Calderon-Aguileraa, Luis Eduardo

    2016-01-01

    Corals routinely lose tissue due to causes ranging from predation to disease. Tissue healing and regeneration are fundamental to the normal functioning of corals, yet we know little about this process. We described the microscopic morphology of wound repair in Pocillopora damicornis. Tissue was removed by airbrushing fragments from three healthy colonies, and these were monitored daily at the gross and microscopic level for 40 days. Grossly, corals healed by Day 30, but repigmentation was not evident at the end of the study (40 d). On histology, from Day 8 onwards, tissues at the lesion site were microscopically indistinguishable from adjacent normal tissues with evidence of zooxanthellae in gastrodermis. Inflammation was not evident. P. damicornis manifested a unique mode of regeneration involving projections of cell-covered mesoglea from the surface body wall that anastomosed to form gastrovascular canals.

  3. Wound repair in Pocillopora.

    PubMed

    Rodríguez-Villalobos, Jenny Carolina; Work, Thierry Martin; Calderon-Aguilera, Luis Eduardo

    2016-09-01

    Corals routinely lose tissue due to causes ranging from predation to disease. Tissue healing and regeneration are fundamental to the normal functioning of corals, yet we know little about this process. We described the microscopic morphology of wound repair in Pocillopora damicornis. Tissue was removed by airbrushing fragments from three healthy colonies, and these were monitored daily at the gross and microscopic level for 40days. Grossly, corals healed by Day 30, but repigmentation was not evident at the end of the study (40d). On histology, from Day 8 onwards, tissues at the lesion site were microscopically indistinguishable from adjacent normal tissues with evidence of zooxanthellae in gastrodermis. Inflammation was not evident. P. damicornis manifested a unique mode of regeneration involving projections of cell-covered mesoglea from the surface body wall that anastomosed to form gastrovascular canals.

  4. Current advances in DNA repair: regulation of enzymes and pathways involved in maintaining genomic stability.

    PubMed

    Neher, Tracy M; Turchi, John J

    2011-06-15

    Novel discoveries in the DNA repair field have lead to continuous and rapid advancement of our understanding of not only DNA repair but also DNA replication and recombination. Research in the field transcends numerous areas of biology, biochemistry, physiology, and medicine, making significant connections across these broad areas of study. From early studies conducted in bacterial systems to current analyses in eukaryotic systems and human disease, the innovative research into the mechanisms of repair machines and the consequences of ineffective DNA repair has impacted a wide scientific community. This Forum contains a select mix of primary research articles in addition to a number of timely reviews covering a subset of DNA repair pathways where recent advances and novel discoveries are improving our understanding of DNA repair, its regulation, and implications to human disease.

  5. Bacterial DNA repair genes and their eukaryotic homologues: 5. The role of recombination in DNA repair and genome stability.

    PubMed

    Nowosielska, Anetta

    2007-01-01

    Recombinational repair is a well conserved DNA repair mechanism present in all living organisms. Repair by homologous recombination is generally accurate as it uses undamaged homologous DNA molecule as a repair template. In Escherichia coli homologous recombination repairs both the double-strand breaks and single-strand gaps in DNA. DNA double-strand breaks (DSB) can be induced upon exposure to exogenous sources such as ionizing radiation or endogenous DNA-damaging agents including reactive oxygen species (ROS) as well as during natural biological processes like conjugation. However, the bulk of double strand breaks are formed during replication fork collapse encountering an unrepaired single strand gap in DNA. Under such circumstances DNA replication on the damaged template can be resumed only if supported by homologous recombination. This functional cooperation of homologous recombination with replication machinery enables successful completion of genome duplication and faithful transmission of genetic material to a daughter cell. In eukaryotes, homologous recombination is also involved in essential biological processes such as preservation of genome integrity, DNA damage checkpoint activation, DNA damage repair, DNA replication, mating type switching, transposition, immune system development and meiosis. When unregulated, recombination can lead to genome instability and carcinogenesis.

  6. How to repair an episiotomy.

    PubMed

    Steen, Mary; Cummins, Bernie

    2016-02-17

    Rationale and key points Skilful repair of an episiotomy is an important aspect of maternal health care. It is essential that midwives and doctors have the knowledge and skills to undertake this procedure in a safe and effective manner. ▶ An episiotomy should be repaired promptly to reduce blood loss and prevent infection. ▶ Repair of an episiotomy is undertaken in three stages: repair of the vaginal mucosa, repair of the muscle layer and repair of the skin layer. ▶ Adequate pain relief should be provided before suturing. Reflective activity Clinical skills articles can help update your practice and ensure it remains evidence based. Apply this article to your practice. Reflect on and write a short account of: 1. Why a rectal examination is recommended before and following repair of an episiotomy. 2. What you would do to improve your suturing skills. 3. The factors that may prevent or delay an episiotomy from healing. Subscribers can upload their reflective accounts at rcni.com/portfolio .

  7. Bone repair and stem cells.

    PubMed

    Ono, Noriaki; Kronenberg, Henry M

    2016-10-01

    Bones are an important component of vertebrates; they grow explosively in early life and maintain their strength throughout life. Bones also possess amazing capabilities to repair-the bone is like new without a scar after complete repair. In recent years, a substantial progress has been made in our understanding on mammalian bone stem cells. Mouse genetic models are powerful tools to understand the cell lineage, giving us better insights into stem cells that regulate bone growth, maintenance and repair. Recent findings about these stem cells raise new questions that require further investigations.

  8. Repair Types, Procedures - Part 2

    DTIC Science & Technology

    2010-05-01

    acceptable only if at least one undamaged flange remains in the existing internal structure. Sandwich repairs using extrusions or formed parts are better...easily be affected by bridging the damage with two L-angle extrusions fastened together through undamaged portions of the existing rod to form a ‘splint...Cell Repairs Rubber fuel bladders with damage less than 3 inches/7.6 cm can be repaired in a manner similar to patching tire inner-tubes using Buna-N

  9. 46 CFR Sec. 19 - Ship Repair Summaries.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Ship Repair Summaries. Sec. 19 Section 19 Shipping... Sec. 19 Ship Repair Summaries. (a) Ship Repair Summaries shall be prepared on Form MA-159 by the... jurisdiction and submitted to the District Ship Repair and Maintenance office involved. The summaries must...

  10. 46 CFR Sec. 19 - Ship Repair Summaries.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Ship Repair Summaries. Sec. 19 Section 19 Shipping... Sec. 19 Ship Repair Summaries. (a) Ship Repair Summaries shall be prepared on Form MA-159 by the... jurisdiction and submitted to the District Ship Repair and Maintenance office involved. The summaries must...

  11. 46 CFR Sec. 19 - Ship Repair Summaries.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Ship Repair Summaries. Sec. 19 Section 19 Shipping... Sec. 19 Ship Repair Summaries. (a) Ship Repair Summaries shall be prepared on Form MA-159 by the... jurisdiction and submitted to the District Ship Repair and Maintenance office involved. The summaries must...

  12. 46 CFR Sec. 19 - Ship Repair Summaries.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Ship Repair Summaries. Sec. 19 Section 19 Shipping... Sec. 19 Ship Repair Summaries. (a) Ship Repair Summaries shall be prepared on Form MA-159 by the... jurisdiction and submitted to the District Ship Repair and Maintenance office involved. The summaries must...

  13. 46 CFR Sec. 19 - Ship Repair Summaries.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Ship Repair Summaries. Sec. 19 Section 19 Shipping... Sec. 19 Ship Repair Summaries. (a) Ship Repair Summaries shall be prepared on Form MA-159 by the... jurisdiction and submitted to the District Ship Repair and Maintenance office involved. The summaries must...

  14. Complex Tricuspid Valve Repair in Patients With Pacer Defibrillator-Related Tricuspid Regurgitation.

    PubMed

    Raman, Jaishankar; Sugeng, Lissa; Lai, David T M; Jeevanandam, Valluvan

    2016-04-01

    Tricuspid valve regurgitation in patients with heart failure or in those undergoing complex cardiac operations is associated with increased morbidity and mortality. We report our results with a technique of repairing the tricuspid valves while retaining the pacer defibrillator lead. Patients had tricuspid valve repairs that included repositioning of the pacer defibrillator lead, approximation of septal and inferior/posterior leaflets in a modified cleft repair, and implantation of a tricuspid annuloplasty ring. This procedure was performed in more than 42 patients with good success.

  15. Aortic aneurysm repair - endovascular- discharge

    MedlinePlus

    ... MRI scan Aortic aneurysm repair - endovascular Aortic angiography Hardening of ... Center-Shreveport, Shreveport, LA. Review provided by VeriMed Healthcare Network. Also reviewed by David Zieve, MD, MHA, Isla ...

  16. Biologic scaffold for CNS repair.

    PubMed

    Meng, Fanwei; Modo, Michel; Badylak, Stephen F

    2014-05-01

    Injury to the CNS typically results in significant morbidity and endogenous repair mechanisms are limited in their ability to restore fully functional CNS tissue. Biologic scaffolds composed of individual purified components have been shown to facilitate functional tissue reconstruction following CNS injury. Extracellular matrix scaffolds derived from mammalian tissues retain a number of bioactive molecules and their ability for CNS repair has recently been recognized. In addition, novel biomaterials for dural mater repairs are of clinical interest as the dura provides barrier function and maintains homeostasis to CNS. The present article describes the application of regenerative medicine principles to the CNS tissues and dural mater repair. While many approaches have been exploring the use of cells and/or therapeutic molecules, the strategies described herein focus upon the use of extracellular matrix scaffolds derived from mammalian tissues that are free of cells and exogenous factors.

  17. Mammalian DNA Repair. Final Report

    SciTech Connect

    2003-01-24

    The Gordon Research Conference (GRC) on Mammalian DNA Repair was held at Harbortown Resort, Ventura Beach, CA. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  18. Nucleotide excision repair in humans.

    PubMed

    Spivak, Graciela

    2015-12-01

    The demonstration of DNA damage excision and repair replication by Setlow, Howard-Flanders, Hanawalt and their colleagues in the early 1960s, constituted the discovery of the ubiquitous pathway of nucleotide excision repair (NER). The serial steps in NER are similar in organisms from unicellular bacteria to complex mammals and plants, and involve recognition of lesions, adducts or structures that disrupt the DNA double helix, removal of a short oligonucleotide containing the offending lesion, synthesis of a repair patch copying the opposite undamaged strand, and ligation, to restore the DNA to its original form. The transcription-coupled repair (TCR) subpathway of NER, discovered nearly two decades later, is dedicated to the removal of lesions from the template DNA strands of actively transcribed genes. In this review I will outline the essential factors and complexes involved in NER in humans, and will comment on additional factors and metabolic processes that affect the efficiency of this important process.

  19. Nucleotide excision repair in humans

    PubMed Central

    Spivak, Graciela

    2015-01-01

    The demonstration of DNA damage excision and repair replication by Setlow, Howard-Flanders, Hanawalt and their colleagues in the early 1960s, constituted the discovery of the ubiquitous pathway of nucleotide excision repair (NER). The serial steps in NER are similar in organisms from unicellular bacteria to complex mammals and plants, and involve recognition of lesions, adducts or structures that disrupt the DNA double helix, removal of a short oligonucleotide containing the offending lesion, synthesis of a repair patch copying the opposite undamaged strand, and ligation, to restore the DNA to its original form. The transcription-coupled repair (TCR) subpathway of NER, discovered nearly two decades later, is dedicated to the removal of lesions from the template DNA strands of actively transcribed genes. In this review I will outline the essential factors and complexes involved in NER in humans, and will comment on additional factors and metabolic processes that affect the efficiency of this important process. PMID:26388429

  20. Precision Instrument and Equipment Repairers.

    ERIC Educational Resources Information Center

    Wyatt, Ian

    2001-01-01

    Explains the job of precision instrument and equipment repairers, who work on cameras, medical equipment, musical instruments, watches and clocks, and industrial measuring devices. Discusses duties, working conditions, employment and earnings, job outlook, and skills and training. (JOW)

  1. Shipboard Analytical Capabilities on the Renovated JOIDES Resolution, IODP Riserless Drilling Vessel

    NASA Astrophysics Data System (ADS)

    Blum, P.; Foster, P.; Houpt, D.; Bennight, C.; Brandt, L.; Cobine, T.; Crawford, W.; Fackler, D.; Fujine, K.; Hastedt, M.; Hornbacher, D.; Mateo, Z.; Moortgat, E.; Vasilyev, M.; Vasilyeva, Y.; Zeliadt, S.; Zhao, J.

    2008-12-01

    The JOIDES Resolution (JR) has conducted 121 scientific drilling expeditions during the Ocean Drilling Program (ODP) and the first phase of the Integrated Ocean Drilling Program (IODP) (1983-2006). The vessel and scientific systems have just completed an NSF-sponsored renovation (2005-2008). Shipboard analytical systems have been upgraded, within funding constraints imposed by market driven vessel conversion cost increases, to include: (1) enhanced shipboard analytical services including instruments and software for sampling and the capture of chemistry, physical properties, and geological data; (2) new data management capabilities built around a laboratory information management system (LIMS), digital asset management system, and web services; (3) operations data services with enhanced access to navigation and rig instrumentation data; and (4) a combination of commercial and home-made user applications for workflow- specific data extractions, generic and customized data reporting, and data visualization within a shipboard production environment. The instrumented data capture systems include a new set of core loggers for rapid and non-destructive acquisition of images and other physical properties data from drill cores. Line-scan imaging and natural gamma ray loggers capture data at unprecedented quality due to new and innovative designs. Many instruments used to characterize chemical compounds of rocks, sediments, and interstitial fluids were upgraded with the latest technology. The shipboard analytical environment features a new and innovative framework (DESCinfo) and application (DESClogik) for capturing descriptive and interpretive data from geological sub-domains such as sedimentology, petrology, paleontology, structural geology, stratigraphy, etc. This system fills a long-standing gap by providing a global database, controlled vocabularies and taxa name lists with version control, a highly configurable spreadsheet environment for data capture, and

  2. Conceptual design report: Nuclear materials storage facility renovation. Part 7, Estimate data

    SciTech Connect

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment III-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VII - Estimate Data, contains the project cost estimate information.

  3. Conceptual design report: Nuclear materials storage facility renovation. Part 3, Supplemental information

    SciTech Connect

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. It is organized into seven parts. Part I - Design Concept describes the selected solution. Part III - Supplemental Information contains calculations for the various disciplines as well as other supporting information and analyses.

  4. WITS-HEX: A renovated code for analysis of PIXE X-ray spectra

    NASA Astrophysics Data System (ADS)

    Lipworth, A. D.; Annegarn, H. J.; Bauman, S.; Molokomme, T.; Walker, A. J.

    1990-04-01

    The code REX [H.C. Kaufmann and K.R. Akselsson, Adv. X-ray Anal. 18 (1975) 353] and its successor, HEX were developed at Florida State University and University of Lund in the early seventies for quantitative reduction of PIXE spectra. HEX modelled many of the physical processes, including target self-absorption. Lack of adequate documentation and several inherent software related problems hampered widespread adoption and further development. HEX was designed using a hierarchical functional design approach, coded in FORTRAN IV. Its element library and request list are tightly constrained. ANSI standard FORTRAN provides few structured constructs, nor does it support dynamic data structures. HEX has a batch mode of interaction which affords minimal (interim) user interactions. To overcome these limitations we have modernised the program to run on IBM PC compatible computers by using object-oriented design techniques, documented in Program Description Language (pseudo-code) and implemented in a modern programming language, Pascal. Turbo Pascal 5.5 provides an integrated program development environment, a high resolution graphics library, an operating system interface and many software development tools to improve programmer productivity. A menu-based highly interactive screen management library is used for the user interface. A demonstration version is available for user evaluation. Further rigorous testing and the development of user acquired spectra interfacing code will be developed before the first release. The renovated code, WITS-HEX, has extracted the intellectual value embodied in HEX. It will be inherently more stable, reliable, versatile, maintainable and easy to use to facilitate future process modifications.

  5. Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

    SciTech Connect

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system.

  6. Conceptual design report: Nuclear materials storage facility renovation. Part 6, Alternatives study

    SciTech Connect

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for material and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment 111-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VI - Alternatives Study, presents a study of the different storage/containment options considered for NMSF.

  7. Aircraft Metal Skin Repair and Honeycomb Structure Repair; Sheet Metal Work 3: 9857.02.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course helps students determine types of repairs, compute repair sizes, and complete the repair through surface protection. Course content includes goals, specific objectives, protection of metals, repairs to metal skin, and honeycomb structure repair. A bibliography and post-test are appended. A prerequisite for this course is mastery of the…

  8. Rehabilitation after Rotator Cuff Repair

    PubMed Central

    Nikolaidou, Ourania; Migkou, Stefania; Karampalis, Christos

    2017-01-01

    Background: Rotator cuff tears are a very common condition that is often incapacitating. Whether non-surgical or surgical, successful management of rotator cuff disease is dependent on appropriate rehabilitation. If conservative management is insufficient, surgical repair is often indicated. Postsurgical outcomes for patients having had rotator cuff repair can be quite good. A successful outcome is much dependent on surgical technique as it is on rehabilitation. Numerous rehabilitation protocols for the management of rotator cuff disease are based primarily on clinical experience and expert opinion. This article describes the different rehabilitation protocols that aim to protect the repair in the immediate postoperative period, minimize postoperative stiffness and muscle atrophy. Methods: A review of currently available literature on rehabilitation after arthroscopic rotator cuff tear repair was performed to illustrate the available evidence behind various postoperative treatment modalities. Results: There were no statistically significant differences between a conservative and an accelerated rehabilitation protocol . Early passive range of motion (ROM) following arthroscopic cuff repair is thought to decrease postoperative stiffness and improve functionality. However, early aggressive rehabilitation may compromise repair integrity. Conclusion: The currently available literature did not identify any significant differences in functional outcomes and relative risks of re-tears between delayed and early motion in patients undergoing arthroscopic rotator cuff repairs. A gentle rehabilitation protocol with limits in range of motion and exercise times after arthroscopic rotator cuff repair would be better for tendon healing without taking any substantial risks. A close communication between the surgeon, the patient and the physical therapy team is important and should continue throughout the whole recovery process.

  9. Shotcrete for Expedient Structural Repair

    DTIC Science & Technology

    1991-12-01

    AD-A260 788 ESL-TR-90-14 SHOTCRETE FOR EXPEDIENT STRUCTURAL REPAIR 4t ’Pit at MARK ANDERSON APPLIED RESEARCH ASSOCIATES, INC. P.O. BOX 40128...SUBTITrrLE S. FUNDING NUMBERS Shotcrete for Expedient Structural Repair 4. AUTHOR(S) F08635-88-C-0067 Anderson, Mark 7. PERFORMING ORGANIZATION NAME(S) AND...AVAILABILITY STATEMENT 12b. DISTRIBUTION CODE Approved for public release. Distribution unlimited. 13. ABSTRACT (Maximum 200 words) Shotcrete , or

  10. Durability of Expedient Repair Materials

    DTIC Science & Technology

    1993-03-01

    by the Flofida Department of Transportation. I&. SUWIUET" TERMS 󈧓. NUMBER OF 1A1ES Expedient Repair Materials 21PAGE Shotcrete Air Force Base...produced by CTS Cemem Company. A dry process shotcrete standard, MicrosilR, and a State of Florida corrosion - resistant concrete system, referred to as...34 durability of the rapid repair materials tested by conventional methods for determining durability. E. CONCLUSIONS The blended Rapid-SetR shotcrete system

  11. Arthroscopic revision of Bankart repair.

    PubMed

    Neri, Brian R; Tuckman, David V; Bravman, Jonathan T; Yim, Duke; Sahajpal, Deenesh T; Rokito, Andrew S

    2007-01-01

    The success of revision surgery for failed Bankart repair is not well known. This purpose of this study was to report the success rates achieved using arthroscopic techniques to revise failed Bankart repairs. Twelve arthroscopic revision Bankart repairs were performed on patients with recurrent unidirectional shoulder instability after open or arthroscopic Bankart repair. Follow-up was available on 11 of the 12 patients at a mean of 34.4 months (range, 25-56 months). The surgical findings, possible modes of failure, shoulder scores (Rowe score, University of California Los Angeles [UCLA], Simple Shoulder Test), and clinical outcome were evaluated. Various modes of failure were recognized during revision arthroscopic Bankart repairs. Good-to-excellent results were obtained in 8 patients (73%) undergoing revision stabilization according to Rowe and UCLA scoring. A subluxation or dislocation event occurred in 3 (27%) of the 11 patients at a mean of 8.7 months (range, 6-12 months) postoperatively. Arthroscopic revision Bankart repairs are technically challenging procedures but can be used to achieve stable, pain-free, functional shoulders with return to prior sport. Owing to limited follow-up and the small number of patients in this study, we were unable to conclude any pattern of failure or selection criteria for this procedure.

  12. Parastomal hernia repair. An update.

    PubMed

    Wara, P

    2011-04-01

    Repair of parastomal hernia remains controversial. Open suture repair of the fascial defect or stoma resiting are both associated with high morbidity and unacceptably high recurrence rates and are no longer recommended for routine use. Mesh repair appears to provide the best results. Following the first anectodal reports there are accumulating evidence that laparoscopic mesh repair is feasible and has a promising potential in the management of parastomal hernia. Two laparoscopic techniques have emerged, the use of a mesh with a slit and a central keyhole and a mesh without a slit, the latter often termed as a modified Sugarbaker. Published series, however, are observational and often with a short length of follow-up. Most series suffer from small sample size and controlled trials are lacking. The limited data, therefore, make it difficult to draw conclusions. At present none of the methods of open or laparoscopic mesh repair has proved superior. In spite of this laparoscopic repair has gained increasing acceptance. A polypropylene based mesh with an anti-adhesive layer covering the visceral side seems to be applicable using the keyhole technique with a slit as well as the modified Sugarbaker technique. A PTFE mesh should preferably be used with the modified Sugarbaker technique. If a PTFE mesh is used with the keyhole technique parastomal hernia is likely to recur.

  13. Removal of Legacy Hardware Leads to Modernization

    NASA Video Gallery

    The Commercial Crew and Cargo Processing Facility at NASA's Kennedy Space Center in Florida is going through major renovations to support the manufacturing of The Boeing Company's CST-100 spacecraf...

  14. DNA repair mechanisms in dividing and non-dividing cells.

    PubMed

    Iyama, Teruaki; Wilson, David M

    2013-08-01

    DNA damage created by endogenous or exogenous genotoxic agents can exist in multiple forms, and if allowed to persist, can promote genome instability and directly lead to various human diseases, particularly cancer, neurological abnormalities, immunodeficiency and premature aging. To avoid such deleterious outcomes, cells have evolved an array of DNA repair pathways, which carry out what is typically a multiple-step process to resolve specific DNA lesions and maintain genome integrity. To fully appreciate the biological contributions of the different DNA repair systems, one must keep in mind the cellular context within which they operate. For example, the human body is composed of non-dividing and dividing cell types, including, in the brain, neurons and glial cells. We describe herein the molecular mechanisms of the different DNA repair pathways, and review their roles in non-dividing and dividing cells, with an eye toward how these pathways may regulate the development of neurological disease.

  15. New insights into the mechanism of DNA mismatch repair

    PubMed Central

    Reyes, Gloria X.; Schmidt, Tobias T.; Kolodner, Richard D.; Hombauer, Hans

    2015-01-01

    The genome of all organisms is constantly being challenged by endogenous and exogenous sources of DNA damage. Errors like base:base mismatches or small insertions and deletions, primarily introduced by DNA polymerases during DNA replication are repaired by an evolutionary conserved DNA mismatch repair (MMR) system. The MMR system, together with the DNA replication machinery, promote repair by an excision and resynthesis mechanism during or after DNA replication, increasing replication fidelity by upto-three orders of magnitude. Consequently, inactivation of MMR genes results in elevated mutation rates that can lead to increased cancer susceptibility in humans. In this review, we summarize our current understanding of MMR with a focus on the different MMR protein complexes, their function and structure. We also discuss how recent findings have provided new insights in the spatio-temporal regulation and mechanism of MMR. PMID:25862369

  16. DNA repair mechanisms in dividing and non-dividing cells

    PubMed Central

    Iyama, Teruaki; Wilson, David M.

    2013-01-01

    DNA damage created by endogenous or exogenous genotoxic agents can exist in multiple forms, and if allowed to persist, can promote genome instability and directly lead to various human diseases, particularly cancer, neurological abnormalities, immunodeficiency and premature aging. To avoid such deleterious outcomes, cells have evolved an array of DNA repair pathways, which carry out what is typically a multiple-step process to resolve specific DNA lesions and maintain genome integrity. To fully appreciate the biological contributions of the different DNA repair systems, one must keep in mind the cellular context within they operate. For example, the human body is composed of non-dividing and dividing cell types, including, in the brain, neurons and glial cells. We describe herein the molecular mechanisms of the different DNA repair pathways, and review their roles in non-dividing and dividing cells, with an eye towards how these pathways may regulate the development of neurological disease. PMID:23684800

  17. Renovating the built environment for dementia care: lessons learned at the Lodge at Broadmead in Victoria, British Columbia.

    PubMed

    Gnaedinger, Nancy; Robinson, Janice; Sudbury, Fiona; Dutchak, Merv

    2007-01-01

    Major renovations were carried out in occupied dementia care units at the Lodge at Broadmead, Victoria, British Columbia. A 32-bed lodge was divided into two, requiring the relocation of three sets of doors. Home-like kitchens and living and dining rooms were built and furnished in each unit. A silent resident call system was installed. Nursing stations were moved off the unit. Murals added atmosphere and camouflaged exit doors. The process, while challenging, was successful due to comprehensive planning, careful phasing, the contractor's daily presence, the education of construction workers about residents, constant communication among key people and cooperation of lodge staff. Preliminary results are positive.

  18. Brain necrosis after fractionated radiation therapy: Is the halftime for repair longer than we thought?

    SciTech Connect

    Bender, Edward T.

    2012-11-15

    Purpose: To derive a radiobiological model that enables the estimation of brain necrosis and spinal cord myelopathy rates for a variety of fractionation schemes, and to compare repair effects between brain and spinal cord. Methods: Sigmoidal dose response relationships for brain radiation necrosis and spinal cord myelopathy are derived from clinical data using nonlinear regression. Three different repair models are considered and the repair halftimes are included as regression parameters. Results: For radiation necrosis, a repair halftime of 38.1 (range 6.9-76) h is found with monoexponential repair, while for spinal cord myelopathy, a repair halftime of 4.1 (range 0-8) h is found. The best-fit alpha beta ratio is 0.96 (range 0.24-1.73)Conclusions: A radiobiological model that includes repair corrections can describe the clinical data for a variety of fraction sizes, fractionation schedules, and total doses. Modeling suggests a relatively long repair halftime for brain necrosis. This study suggests that the repair halftime for late radiation effects in the brain may be longer than is currently thought. If confirmed in future studies, this may lead to a re-evaluation of radiation fractionation schedules for some CNS diseases, particularly for those diseases where fractionated stereotactic radiation therapy is used.

  19. Finding of No Significant Impact: Repair and Renovate Airborne Warning and Control System Maintenance Group Complex, Building 230 Tinker Air Force Base Oklahoma City, Oklahoma

    DTIC Science & Technology

    2012-02-01

    cutting into the concrete slab are addressed in Section 4.3, Hazardous Materials and Wastes , and are not included under Water Resources.) No-Action...into the concrete slab are addressed in Section 4.3, Hazardous Materials and Wastes , and are not covered under Water Resources.) Implementation of...Dioxide. SO2 is emitted primarily from stationary source coal and oil combustion, steel mills, refineries, pulp and paper mills, and nonferrous smelters

  20. Effect of Scapular Dyskinesis on Supraspinatus Repair Healing in a Rat Model

    PubMed Central

    Reuther, Katherine E.; Tucker, Jennica J.; Thomas, Stephen J.; Vafa, Rameen P.; Liu, Stephen S.; Gordon, Joshua A.; Caro, Adam C.; Yannascoli, Sarah M.; Kuntz, Andrew F.; Soslowsky, Louis J.

    2015-01-01

    Background Rotator cuff tears are common conditions that often require surgical repair to improve function and relieve pain. Unfortunately, repair failure remains a common problem following rotator cuff repair surgery. Several factors may contribute to repair failure including age, tear size, and time from injury. However, the mechanical mechanisms resulting in repair failure are not well understood making clinical management difficult. Specifically, altered scapular motion (termed scapular dyskinesis) may be one important and modifiable factor contributing to the risk of repair failure. Therefore, the objective of this study was to determine the effect of scapular dyskinesis on supraspinatus tendon healing following repair. Methods A rat model of scapular dyskinesis was used. 70 adult male Sprague-Dawley rats (400-450 grams) were randomized into two groups: nerve transection of the accessory and long-thoracic nerves (SD) or sham nerve transection (Sham Control). Following this procedure, all rats underwent unilateral detachment and repair of the supraspinatus tendon. All rats were sacrificed at 2, 4, and 8 weeks after surgery. Shoulder function, passive joint mechanics, and tendon properties (mechanical, histological, organizational, and compositional) were evaluated. Results Scapular dyskinesis alters joint function and may lead to compromised supraspinatus tendon properties. Specifically, diminished mechanical properties, altered histology, and decreased tendon organization was observed for some parameters. Conclusion This study identifies scapular dyskinesis as one underlying mechanism leading to compromise of supraspinatus healing following repair. Identifying modifiable factors that lead to compromised tendon healing will help improve clinical outcomes following repair. Level of evidence Basic Science, in-vivo Animal Study. PMID:25745826

  1. Dysferlin-mediated phosphatidylserine sorting engages macrophages in sarcolemma repair

    PubMed Central

    Middel, Volker; Zhou, Lu; Takamiya, Masanari; Beil, Tanja; Shahid, Maryam; Roostalu, Urmas; Grabher, Clemens; Rastegar, Sepand; Reischl, Markus; Nienhaus, Gerd Ulrich; Strähle, Uwe

    2016-01-01

    Failure to repair the sarcolemma leads to muscle cell death, depletion of stem cells and myopathy. Hence, membrane lesions are instantly sealed by a repair patch consisting of lipids and proteins. It has remained elusive how this patch is removed to restore cell membrane integrity. Here we examine sarcolemmal repair in live zebrafish embryos by real-time imaging. Macrophages remove the patch. Phosphatidylserine (PS), an ‘eat-me' signal for macrophages, is rapidly sorted from adjacent sarcolemma to the repair patch in a Dysferlin (Dysf) dependent process in zebrafish and human cells. A previously unrecognized arginine-rich motif in Dysf is crucial for PS accumulation. It carries mutations in patients presenting with limb-girdle muscular dystrophy 2B. This underscores the relevance of this sequence and uncovers a novel pathophysiological mechanism underlying this class of myopathies. Our data show that membrane repair is a multi-tiered process involving immediate, cell-intrinsic mechanisms as well as myofiber/macrophage interactions. PMID:27641898

  2. Exploration Challenges: Transferring Ground Repair Techniques to Space Flight Application

    NASA Technical Reports Server (NTRS)

    McLemore, Carole A.; Kennedy, James P.; Rose, Frederick A.; Evans, Brian W.

    2007-01-01

    Fulfilling NASA's Vision for Space Exploration will demand an extended presence in space at distances from our home planet that exceed our current experience in space logistics and maintenance. The ability to perform repairs in lieu of the customary Orbital Replacement Unit (ORU) process where a faulty part is replaced will be elevated from contingency to routine to sustain operations. The use and cost effectiveness of field repairs for ground based operations in industry and the military have advanced with the development of technology in new materials, new repair techniques and new equipment. The unique environments, accessibility constraints and Extra Vehicular Activity (EVA) issues of space operations will require extensive assessment and evolution of these technologies to provide an equivalent and expected level of assurance to mission success. Challenges include the necessity of changes in design philosophy and policy, extremes in thermal cycling, disruptive forces (such as static charge and wind entrainment) on developed methods for control of materials, dramatically increased volatility of chemicals for cleaning and other compounds due to extremely low pressures, the limits imposed on dexterity and maneuverability by current EVA equipment and practices, and the necessity of unique verification methodology. This paper describes these challenges in and discusses the effects on the established ground techniques for repair. The paper also describes the leading repair methodology candidates and their beneficial attributes for resolving these issues with the evolution of technology.

  3. Comma Sign–Directed Repair of Anterosuperior Rotator Cuff Tears

    PubMed Central

    Dilisio, Matthew F.; Neyton, Lionel

    2014-01-01

    The comma sign was described as an arthroscopic landmark to identify the torn subscapularis stump to mobilize and repair the tendon in anterosuperior rotator cuff tears. It was hypothesized that it is composed of the humeral attachments of the superior glenohumeral and coracohumeral ligaments. This arthroscopic finding has since become accepted orthopaedic nomenclature pathognomonic for subscapularis tears and a key component of subscapularis tear classification. We propose an alternative theory of the pathoanatomy of the comma sign in anterosuperior rotator cuff tears and present the technique of comma sign–directed repairs of combined subscapularis and supraspinatus lesions. After appropriate releases, tendon-to-tendon repair of the distal-superior aspect of the comma sign to the upper border of the remnant subscapularis results in anatomic re-creation of the intra-articular portion of the torn subscapularis with concomitant reduction of the anterior leading edge of the supraspinatus and reconstitution of the rotator cable complex. A tension-free, single-anchor subscapularis repair is then performed to secure the tendon to the lesser tuberosity. After subscapularis repair, the supraspinatus that was previously retracted to the glenoid rim takes the appearance of a crescent-type tear that is easily approximated to its anatomic insertion. PMID:25685676

  4. Mitochondrial DNA repair: a novel therapeutic target for heart failure.

    PubMed

    Marín-García, José

    2016-09-01

    Mitochondria play a crucial role in a variety of cellular processes ranging from energy metabolism, generation of reactive oxygen species (ROS) and Ca(2+) handling to stress responses, cell survival and death. Malfunction of the organelle may contribute to the pathogenesis of neuromuscular, cancer, premature aging and cardiovascular diseases (CVD), including myocardial ischemia, cardiomyopathy and heart failure (HF). Mitochondria contain their own genome organized into DNA-protein complexes, called "mitochondrial nucleoids," along with multiprotein machineries, which promote mitochondrial DNA (mtDNA) replication, transcription and repair. Although the mammalian organelle possesses almost all known nuclear DNA repair pathways, including base excision repair, mismatch repair and recombinational repair, the proximity of mtDNA to the main sites of ROS production and the lack of protective histones may result in increased susceptibility to various types of mtDNA damage. These include accumulation of mtDNA point mutations and/or deletions and decreased mtDNA copy number, which will impair mitochondrial function and finally, may lead to CVD including HF.

  5. Repair integrity monitoring of composite aerostructures using thermographic imaging

    NASA Astrophysics Data System (ADS)

    Grammatikos, S.; Kordatos, E.; Barkoula, N.-M.; Matikas, T.; Paipetis, A.

    2010-04-01

    Bonded repair offers significant advantages over mechanically fastened repair schemes as it eliminates local stress concentrations and seals the interface between the mother structure and the patch. However, it is particularly difficult to assess the efficiency of the bonded repair as well as its performance during service loads. Thermography is a particularly attractive technique for the particular application as it is a non-contact, wide field non destructive method. Phase thermography is also offering the advantage of depth discrimination in layered structures such as in typical patch repairs particularly in the case where composites are used. Lock-in thermography offers the additional advantage of on line monitoring of the loaded structure and subsequently the real time evolution of any progressive debonding which may lead to critical failure of the patched repair. In this study composite systems (CFRP plates) with artificially introduced defects (PTFE) were manufactured. The aforementioned methods were employed in order to assess the efficiency of the thermographic technique. The obtained results were compared with typical C-scans.

  6. Analytic model to predict the strength of tendon repairs.

    PubMed

    Lotz, J C; Hariharan, J S; Diao, E

    1998-07-01

    We developed an analytic model to predict suture load-sharing immediately after flexor tendon repair in the hand. Tendon repair was mathematically modeled as two nonlinear springs in parallel, representing separate core and peripheral sutures that were in series with a third nonlinear spring representing the tendon. To serve as a basis for, and validation of, our analytic model, fresh human flexor digitorum profundus tendons were harvested and mechanically tested either intact or after surgical repair in a variety of ways: core suture alone, superficial peripheral suture alone, deep peripheral suture alone, core suture plus superficial peripheral suture, and core suture plus deep peripheral suture. The stiffness and strength of the composite repairs predicted with use of the analytic model were comparable with those determined experimentally. Furthermore, the model predicted inequities in suture load-sharing, with 64% of the applied load carried by the peripheral suture when it was placed superficially, as compared with 77% when the peripheral suture was placed deep. Our results demonstrate a disparity in load-sharing within composite suture systems, the rectification of which may lead to significant improvement in the repair strength. To this end, we expect that our analytic model will serve as a basis for the design of more efficient, and consequently stronger, suture techniques.

  7. United States Air Force Research on Airfield Pavement Repairs Using Precast Portland Cement Concrete (PCC) Slabs (BRIEFING SLIDES)

    DTIC Science & Technology

    2008-08-28

    AFRL-RX-TY-TP-2008-4582 POSTPRINT UNITED STATES AIR FORCE RESEARCH ON AIRFIELD PAVEMENT REPAIRS USING PRECAST PORTLAND CEMENT CONCRETE ...pavement Portland cement concrete (PCC) slab repairs using precast PCC slab panels. AFRL is leading the technology development by critically reviewing the...technology transfer activities including, but not limited to, training, reports and preparation of ETLs. 2 The use of precast concrete slabs for repair of

  8. The Lead Industry and Lead Water Pipes “A MODEST CAMPAIGN”

    PubMed Central

    Rabin, Richard

    2008-01-01

    Lead pipes for carrying drinking water were well recognized as a cause of lead poisoning by the late 1800s in the United States. By the 1920s, many cities and towns were prohibiting or restricting their use. To combat this trend, the lead industry carried out a prolonged and effective campaign to promote the use of lead pipes. Led by the Lead Industries Association (LIA), representatives were sent to speak with plumbers’ organizations, local water authorities, architects, and federal officials. The LIA also published numerous articles and books that extolled the advantages of lead over other materials and gave practical advice on the installation and repair of lead pipes. The LIA’s activities over several decades therefore contributed to the present-day public health and economic cost of lead water pipes. PMID:18633098

  9. Algorithms for treating redundancy in repairable and non-repairable systems

    SciTech Connect

    Campbell, J.E.; Longsine, D.E.; Atkins, J.

    1993-10-01

    This report presents equations and computational algorithms for analyzing reliability of several forms of redundancy in repairable and non-repairable systems. For repairable systems, active, standby, and R of N redundancy with and without repair are treated. For non-repairable systems, active, standby, and R of N redundancy are addressed. These equations can be used to calculate mean time between failures, mean time to repair, and reliability for complex systems involving redundancy.

  10. Association between maternal exposure to housing renovation and offspring with congenital heart disease: a multi-hospital case–control study

    PubMed Central

    2013-01-01

    Background Congenital heart disease (CHD) is one of the most prevalent birth defects. Housing renovations are a newly recognized source of indoor environmental pollution that is detrimental to health. A growing body of research suggests that maternal occupational exposure to renovation materials may be associated with an increased risk of giving birth to fetuses with CHD. However, the effect of indoor housing renovation exposure on CHD occurrence has not been reported. Methods A multi-hospital case–control study was designed to investigate the association between maternal periconceptional housing renovation exposure and the risk of CHD for offspring. In total, 346 cases and 408 controls were enrolled in this study from four hospitals in China. Exposure information was based on a questionnaire given to women during pregnancy. The association between housing renovation exposure and CHD occurrence was assessed by estimating odds ratios (OR) with logistic regression models adjusted for potential confounders. Results The risk for CHD in offspring was significantly associated with maternal exposure to housing renovations (AOR: 1.89, 95% CI: 1.29-2.77). There were similar risks for cardiac defects with or without extra-cardiac malformation (AOR of 2.65 and 1.76, respectively). Maternal housing renovation exposure may increase the fetus’ risk of suffering from conotruncal defect or anomalous venous return. There were significant risks for cardiac defects if the pregnant woman moved into a new house within one month after decoration at either 3 months before pregnancy (AOR: 2.38, 95% CI: 1.03 to 5.48) or during first trimester (AOR: 4.00, 95% CI: 1.62 to 9.86). Conclusions Maternal exposure to housing renovations may have an increased risk of giving birth to fetuses with some selected types of CHD. This relationship was stronger for women who moved into a newly decorated house. However, considering the limited number of subjects and the problem of multiple exposures

  11. The design of repairable advanced composite structures

    NASA Technical Reports Server (NTRS)

    Hart-Smith, L. J.

    1985-01-01

    This paper addresses the repair of advanced composite structures by mechanical fasteners or by adhesive bonding. It is shown that many of today's composite designs are unreasonably difficult to repair. Conversely, the knowledge to design repairable structures is already available, if only it is applied during the initial design stage. Bolted or riveted repairs require only the avoidance of extremely orthotropic composite fiber patterns; those near the quasi-isotropic layup are the most suitable. Mildly orthotropic fiber patterns are appropriate for structures in which there is a dominant load direction. Thick composite structures are shown to require bolted or riveted repairs while thin structures favor adhesively bonded permanent repairs, although provisions can be easily made for temporary mechanical repairs. The reasons why integrally stiffened cocured composite designs are usually impractical to repair are explained and alternative repairable design concepts are presented.

  12. Repair of UVB-induced DNA damage is reduced in melanoma due to low XPC and global genome repair

    PubMed Central

    Budden, Timothy; Davey, Ryan J.; Vilain, Ricardo E.; Ashton, Katie A.; Braye, Stephen G.; Beveridge, Natalie J.; Bowden, Nikola A.

    2016-01-01

    UVB exposure leads to DNA damage, which when unrepaired induces C>T transitions. These mutations are found throughout the melanoma genome, particularly in non-transcribed regions. The global genome repair (GGR) branch of nucleotide excision repair (NER) is responsible for repairing UV-induced DNA damage across non-transcribed and silent regions of the genome. This study aimed to examine the relationship between UVB and GGR in melanoma. DNA repair capacity and relative expression of NER in melanocytes and melanoma cell lines before and after treatment with UVB was quantified. Transcript expression from 196 melanomas was compared to clinical parameters including solar elastosis and whole transcriptome data collected. Melanoma cell lines showed significantly reduced DNA repair when compared to melanocytes, most significantly in the S phase of the cell cycle. Expression of GGR components XPC, DDB1 and DDB2 was significantly lower in melanoma after UVB. In the melanoma tumours, XPC expression correlated with age of diagnosis and low XPC conferred significantly poorer survival. The same trend was seen in the TCGA melanoma dataset. Reduced GGR in melanoma may contribute to the UV mutation spectrum of the melanoma genome and adds further to the growing evidence of the link between UV, NER and melanoma. PMID:27487145

  13. 40 CFR 798.5500 - Differential growth inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... repair proficient and repair deficient bacteria: âBacterial DNA damage or repair tests.â 798.5500 Section... inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA damage or repair tests.” (a) Purpose. Bacterial DNA damage or repair tests measure DNA damage which is expressed as differential...

  14. 40 CFR 798.5500 - Differential growth inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... repair proficient and repair deficient bacteria: âBacterial DNA damage or repair tests.â 798.5500 Section... inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA damage or repair tests.” (a) Purpose. Bacterial DNA damage or repair tests measure DNA damage which is expressed as differential...

  15. 40 CFR 798.5500 - Differential growth inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... repair proficient and repair deficient bacteria: âBacterial DNA damage or repair tests.â 798.5500 Section... inhibition of repair proficient and repair deficient bacteria: “Bacterial DNA damage or repair tests.” (a) Purpose. Bacterial DNA damage or repair tests measure DNA damage which is expressed as differential...

  16. Essentials of skin laceration repair.

    PubMed

    Forsch, Randall T

    2008-10-15

    Skin laceration repair is an important skill in family medicine. Sutures, tissue adhesives, staples, and skin-closure tapes are options in the outpatient setting. Physicians should be familiar with various suturing techniques, including simple, running, and half-buried mattress (corner) sutures. Although suturing is the preferred method for laceration repair, tissue adhesives are similar in patient satisfaction, infection rates, and scarring risk in low skin-tension areas and may be more cost-effective. The tissue adhesive hair apposition technique also is effective in repairing scalp lacerations. The sting of local anesthesia injections can be lessened by using smaller gauge needles, administering the injection slowly, and warming or buffering the solution. Studies have shown that tap water is safe to use for irrigation, that white petrolatum ointment is as effective as antibiotic ointment in postprocedure care, and that wetting the wound as early as 12 hours after repair does not increase the risk of infection. Patient education and appropriate procedural coding are important after the repair.

  17. Contribution of sleep to the repair of neuronal DNA double-strand breaks: evidence from flies and mice

    PubMed Central

    Bellesi, Michele; Bushey, Daniel; Chini, Mattia; Tononi, Giulio; Cirelli, Chiara

    2016-01-01

    Exploration of a novel environment leads to neuronal DNA double-strand breaks (DSBs). These DSBs are generated by type 2 topoisomerase to relieve topological constrains that limit transcription of plasticity-related immediate early genes. If not promptly repaired, however, DSBs may lead to cell death. Since the induction of plasticity-related genes is higher in wake than in sleep, we asked whether it is specifically wake associated with synaptic plasticity that leads to DSBs, and whether sleep provides any selective advantage over wake in their repair. In flies and mice, we find that enriched wake, more than simply time spent awake, induces DSBs, and their repair in mice is delayed or prevented by subsequent wake. In both species the repair of irradiation-induced neuronal DSBs is also quicker during sleep, and mouse genes mediating the response to DNA damage are upregulated in sleep. Thus, sleep facilitates the repair of neuronal DSBs. PMID:27830758

  18. Stem cells and exosomes in cardiac repair.

    PubMed

    Singla, Dinender K

    2016-04-01

    Cardiac diseases currently lead in the number of deaths per year, giving rise an interest in transplanting embryonic and adult stem cells as a means to improve damaged tissue from conditions such as myocardial infarction and coronary artery disease. After testing these cells as a treatment option in both animal and human models, it is believed that these cells improve the damaged tissue primarily through the release of autocrine and paracrine factors. Major concerns such as teratoma formation, immune response, difficulty harvesting cells, and limited cell proliferation and differentiation, hinder the routine use of these cells as a treatment option in the clinic. The advent of stem cell-derived exosomes circumvent those concerns, while still providing the growth factors, miRNA, and additional cell protective factors that aid in repairing and regenerating the damaged tissue. These exosomes have been found to be anti-apoptotic, anti-fibrotic, pro-angiogenic, as well as enhance cardiac differentiation, all of which are key to repairing damaged tissue. As such, stem cell derived exosomes are considered to be a potential new and novel approach in the treatment of various cardiac diseases.

  19. Matrix metalloproteinases in wound repair (review).

    PubMed

    Ravanti, L; Kähäri, V M

    2000-10-01

    Wound repair is initiated with the aggregation of platelets, formation of a fibrin clot, and release of growth factors from the activated coagulation pathways, injured cells, platelets, and extracellular matrix (ECM), followed by migration of inflammatory cells to the wound site. Thereafter, keratinocytes migrate over the wound, angiogenesis is initiated, and fibroblasts deposit and remodel the granulation tissue. Cell migration, angiogenesis, degradation of provisional matrix, and remodeling of newly formed granulation tissue, all require controlled degradation of the ECM. Disturbance in the balance between ECM production and degradation leads to formation of chronic ulcers with excessive ECM degradation, or to fibrosis, for example hypertrophic scars or keloids characterized by excessive accumulation of ECM components. Matrix metalloproteinases (MMPs) are a family of zinc-dependent endopeptidases, which as a group can degrade essentially all ECM components. So far, 20 members of the human MMP family have been identified. Based on their structure and substrate specificity, they can be divided into subgroups of collagenases, stromelysins, stromelysin-like MMPs, gelatinases, membrane-type MMPs (MT-MMPs), and other MMPs. In this review, the role of MMPs in normal wound repair as well as in chronic ulcers is discussed. In addition, the role of signaling pathways, in particular, mitogen-activated protein kinases (MAPKs) in regulating MMP expression is discussed as possible therapeutical targets for wound healing disorders.

  20. Nuclear Dynamics of Heterochromatin Repair.

    PubMed

    Amaral, Nuno; Ryu, Taehyun; Li, Xiao; Chiolo, Irene

    2017-02-01

    Repairing double-strand breaks (DSBs) is particularly challenging in pericentromeric heterochromatin, where the abundance of repeated sequences exacerbates the risk of ectopic recombination and chromosome rearrangements. Recent studies in Drosophila cells revealed that faithful homologous recombination (HR) repair of heterochromatic DSBs relies on the relocalization of DSBs to the nuclear periphery before Rad51 recruitment. We summarize here the exciting progress in understanding this pathway, including conserved responses in mammalian cells and surprising similarities with mechanisms in yeast that deal with DSBs in distinct sites that are difficult to repair, including other repeated sequences. We will also point out some of the most important open questions in the field and emerging evidence suggesting that deregulating these pathways might have dramatic consequences for human health.

  1. Occupational Radiation Exposure During Endovascular Aortic Repair

    SciTech Connect

    Sailer, Anna M.; Schurink, Geert Willem H.; Bol, Martine E. Haan, Michiel W. de Zwam, Willem H. van Wildberger, Joachim E. Jeukens, Cécile R. L. P. N.

    2015-08-15

    PurposeThe aim of the study was to evaluate the radiation exposure to operating room personnel and to assess determinants for high personal doses during endovascular aortic repair.Materials and MethodsOccupational radiation exposure was prospectively evaluated during 22 infra-renal aortic repair procedures (EVAR), 11 thoracic aortic repair procedures (TEVAR), and 11 fenestrated or branched aortic repair procedures (FEVAR). Real-time over-lead dosimeters attached to the left breast pocket measured personal doses for the first operators (FO) and second operators (SO), radiology technicians (RT), scrub nurses (SN), anesthesiologists (AN), and non-sterile nurses (NSN). Besides protective apron and thyroid collar, no additional radiation shielding was used. Procedural dose area product (DAP), iodinated contrast volume, fluoroscopy time, patient’s body weight, and C-arm angulation were documented.ResultsAverage procedural FO dose was significantly higher during FEVAR (0.34 ± 0.28 mSv) compared to EVAR (0.11 ± 0.21 mSv) and TEVAR (0.06 ± 0.05 mSv; p = 0.003). Average personnel doses were 0.17 ± 0.21 mSv (FO), 0.042 ± 0.045 mSv (SO), 0.019 ± 0.042 mSv (RT), 0.017 ± 0.031 mSv (SN), 0.006 ± 0.007 mSv (AN), and 0.004 ± 0.009 mSv (NSN). SO and AN doses were strongly correlated with FO dose (p = 0.003 and p < 0.001). There was a significant correlation between FO dose and procedural DAP (R = 0.69, p < 0.001), iodinated contrast volume (R = 0.67, p < 0.001) and left-anterior C-arm projections >60° (p = 0.02), and a weak correlation with fluoroscopy time (R = 0.40, p = 0.049).ConclusionAverage FO dose was a factor four higher than SO dose. Predictors for high personal doses are procedural DAP, iodinated contrast volume, and left-anterior C-arm projections greater than 60°.

  2. 40 CFR 745.326 - Renovation: State and Tribal program requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... distribution of lead hazard information to owners and occupants of target housing and child-occupied facilities... sampling to be performed by a certified lead-based paint inspector or risk assessor. (ii) Procedures...

  3. 40 CFR 745.326 - Renovation: State and Tribal program requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... distribution of lead hazard information to owners and occupants of target housing and child-occupied facilities... sampling to be performed by a certified lead-based paint inspector or risk assessor. (ii) Procedures...

  4. 40 CFR 745.326 - Renovation: State and Tribal program requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... distribution of lead hazard information to owners and occupants of target housing and child-occupied facilities... sampling to be performed by a certified lead-based paint inspector or risk assessor. (ii) Procedures...

  5. 40 CFR 745.326 - Renovation: State and Tribal program requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... distribution of lead hazard information to owners and occupants of target housing and child-occupied facilities... distributing the lead hazard information to owners and occupants of housing and child-occupied facilities...

  6. 40 CFR 745.326 - Renovation: State and Tribal program requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... distribution of lead hazard information to owners and occupants of target housing and child-occupied facilities... distributing the lead hazard information to owners and occupants of housing and child-occupied facilities...

  7. Techniques in Endovascular Aneurysm Repair

    PubMed Central

    Phade, Sachin V.; Garcia-Toca, Manuel; Kibbe, Melina R.

    2011-01-01

    Endovascular repair of infrarenal abdominal aortic aneurysms (EVARs) has revolutionized the treatment of aortic aneurysms, with over half of elective abdominal aortic aneurysm repairs performed endoluminally each year. Since the first endografts were placed two decades ago, many changes have been made in graft design, operative technique, and management of complications. This paper summarizes modern endovascular grafts, considerations in preoperative planning, and EVAR techniques. Specific areas that are addressed include endograft selection, arterial access, sheath delivery, aortic branch management, graft deployment, intravascular ultrasonography, pressure sensors, management of endoleaks and compressed limbs, and exit strategies. PMID:22121487

  8. Mountain Plains Learning Experience Guide: Automotive Repair. Course: Engine Repair.

    ERIC Educational Resources Information Center

    Schramm, C.; Osland, Walt

    One of twelve individualized courses included in an automotive repair curriculum, this course covers theory and construction, inspection diagnoses, and service and overhaul of automotive engines. The course is comprised of five units: (1) Fundamentals of Four-Cycle Engines, (2) Engine Construction, (3) Valve Train, (4) Lubricating Systems, and (5)…

  9. Heavy metal pollution among autoworkers. I. Lead.

    PubMed Central

    Clausen, J; Rastogi, S

    1977-01-01

    Lead pollution was evaluated in 216 individuals working in 10 garages on the Island of Funen, Denmark and related to data from biochemical and medical examinations. Clinical symptoms were recorded by means of a questionnaire. Increased blood test lead levels were foun in 59% with 9% having above 80 microgram lead/100 ml (3-86mumol/1) whole blood. Mechanics in eight out of ten garages had significantly increased blood lead levels. A decrease in delta-aminolevulinic acid dehydratase (ALAD) activity was associated with increased blood lead levels but the latter were not related to haematological changes, tobacco consumption or to length of service in the trade. Particulate lead air pollution was not the sole cause of increased blood lead levels. Raised lead values were maximal among diesel engine workers who are exposed to high pressure-resistant lubricants containing lead naphthenate. As these workers complained of skin damage, lead absorption may have occurred through the skin. Assay of lead content showed 9290 ppm in gear oil and 1500-3500 ppm in used motor oils. The data are discussed in relation to the occupational risks in auto repair shops. PMID:911691

  10. Space Station Solar Array Joint Repair

    NASA Technical Reports Server (NTRS)

    Loewenthal, Stuart; Allmon, Curtis; Reznik, Carter; McFatter, Justin; Davis, Robert E.

    2015-01-01

    In Oct 2007 the International Space Station (ISS) crew noticed a vibrating camera in the vicinity of Starboard Solar Alpha Rotary Joint (SARJ). It had less than 5 months of run time when the anomaly was observed. This approximately 3.2 meter diameter bearing joint supports solar arrays that power the station critical to its operation. The crew performed an EVA to identify what was causing the vibration. It was discovered that one of the 3 bearing tracks of this unconventional bearing had significant spalling damage. This paper discusses the SARJ's unique bearing design and the vulnerability in its design leading to the observed anomaly. The design of a SARJ vacuum test rig is also described along with the results of a life test that validated the proposed repair should extend the life of the SARJ a minimum of 18 years on-orbit.

  11. Safety and health in boatbuilding and repair.

    PubMed

    Brigham, C R; Landrigan, P J

    1985-01-01

    Boatbuilding is a complex, chemically intensive industry which employs approximately 43,000 workers in the United States, 77% of them in shops with fewer than 20 workers. Boatbuilders and repairers are at high risk of occupational injury from falls, lacerations, low back trauma, repetitive motion, noise, burns, fires, and explosions. Also they are at risk of acute and chronic illness, including dermatitis, toxic hepatitis, peripheral neuropathy, and chronic encephalopathy as a result of their occupational exposures to such materials as styrene, resins, solvents, paints, welding fumes, and coating systems. Boatbuilders also are exposed to toxic woods and to lead. Hazard recognition is the first step toward reduction of injury and disease in boat building. Control of recognized hazards is achieved through engineering controls, ventilation in particular, and through medical surveillance. Strong programs for injury prevention and for health and safety education will produce significant health and economic benefit in the boatbuilding industry.

  12. Final report [DNA Repair and Mutagenesis - 1999

    SciTech Connect

    Walker, Graham C.

    2001-05-30

    The meeting, titled ''DNA Repair and Mutagenesis: Mechanism, Control, and Biological Consequences'', was designed to bring together the various sub-disciplines that collectively comprise the field of DNA Repair and Mutagenesis. The keynote address was titled ''Mutability Doth Play Her Cruel Sports to Many Men's Decay: Variations on the Theme of Translesion Synthesis.'' Sessions were held on the following themes: Excision repair of DNA damage; Transcription and DNA excision repair; UmuC/DinB/Rev1/Rad30 superfamily of DNA polymerases; Cellular responses to DNA damage, checkpoints, and damage tolerance; Repair of mismatched bases, mutation; Genome-instability, and hypermutation; Repair of strand breaks; Replicational fidelity, and Late-breaking developments; Repair and mutation in challenging environments; and Defects in DNA repair: consequences for human disease and aging.

  13. Outreach Materials for the Collision Repair Campaign

    EPA Pesticide Factsheets

    The Collision Repair Campaign offers outreach materials to help collision repair shops reduce toxic air exposure. Materials include a DVD, poster, training video, and materials in Spanish (materiales del outreach en español).

  14. Polymorphisms in DNA repair genes and associations with cancer risk.

    PubMed

    Goode, Ellen L; Ulrich, Cornelia M; Potter, John D

    2002-12-01

    Common polymorphisms in DNA repair genes may alter protein function and an individual's capacity to repair damaged DNA; deficits in repair capacity may lead to genetic instability and carcinogenesis. To establish our overall understanding of possible in vivo relationships between DNA repair polymorphisms and the development of cancer, we performed a literature review of epidemiological studies that assessed associations between such polymorphisms and risk of cancer. Thirty studies of polymorphisms in OGG1, XRCC1, ERCC1, XPC, XPD, XPF, BRCA2, and XRCC3 were identified in the April 30, 2002 MEDLINE database (National Center for Biotechnology Information. PubMed Database: http://www.ncbi.nlm.nih.gov/entrez). These studies focused on adult glioma, bladder cancer, breast cancer, esophageal cancer, lung cancer, prostate cancer, skin cancer (melanoma and nonmelanoma), squamous cell carcinoma of the head and neck, and stomach cancer. We found that a small proportion of the published studies were large and population-based. Nonetheless, published data were consistent with associations between: (a) the OGG1 S326C variant and increased risk of various types of cancer; (b) the XRCC1 R194W variant and reduced risk of various types of cancer; and (c) the BRCA2 N372H variant and increased risk of breast cancer. Suggestive results were seen for polymorphisms in other genes; however, small sample sizes may have contributed to false-positive or false-negative findings. We conclude that large, well-designed studies of common polymorphisms in DNA repair genes are needed. Such studies may benefit from analysis of multiple genes or polymorphisms and from the consideration of relevant exposures that may influence the likelihood of cancer in the presence of reduced DNA repair capacity.

  15. Role of tissue repair in toxicologic interactions among hepatotoxic organics.

    PubMed Central

    Soni, M G; Mehendale, H M

    1998-01-01

    It is widely recognized that exposure to combinations or mixtures of chemicals may result in highly exaggerated toxicity even though individual chemicals might not be toxic at low doses. Chemical mixtures may also cause additive or less than additive toxicity. From the perspective of public health, highly exaggerated toxicity is of significant concern. Assessment of risk from exposure to chemical mixtures requires knowledge of the underlying mechanisms. Previous studies from this laboratory have shown that nontoxic doses of chlordecone (10 ppm, 15 days) and carbon tetrachloride (CCl4) (100 microliters/kg) interact at the biologic interface, resulting in potentiated liver injury and 67-fold amplification of CCl4 lethality. In contrast, although interaction between phenobarbital and CCl4 leads to even higher injury, animal survival is unaffected because of highly stimulated compensatory tissue repair. A wide variety of additional experimental evidence confirms the central role of stimulated tissue repair as a decisive determinant of the final outcome of liver injury inflicted by hepatotoxicants. These findings led us to propose a two-stage model of toxicity. In this model, tissue injury is inflicted in stage one by the well-described mechanisms of toxicity, whereas in stage two the ultimate toxic outcome is determined by whether timely and sufficient tissue repair response accompanies this injury. In an attempt to validate this model, dose-response relationships for injury and tissue repair as opposing responses have been developed for model hepatotoxicants. Results of these studies suggest that tissue repair increases in a dose-dependent manner, restraining injury up to a threshold dose, whereupon it is inhibited, allowing an unrestrained progression of injury. These findings indicate that tissue repair is a quantifiable response to toxic injury and that inclusion of this response in risk assessment may help in fine-tuning prediction of toxicity outcomes. Images

  16. In-Space Repair and Refurbishment of Thermal Protection System Structures for Reusable Launch Vehicles

    NASA Technical Reports Server (NTRS)

    Singh, M.

    2007-01-01

    Advanced repair and refurbishment technologies are critically needed for the thermal protection system of current space transportation systems as well as for future launch and crew return vehicles. There is a history of damage to these systems from impact during ground handling or ice during launch. In addition, there exists the potential for in-orbit damage from micrometeoroid and orbital debris impact as well as different factors (weather, launch acoustics, shearing, etc.) during launch and re-entry. The GRC developed GRABER (Glenn Refractory Adhesive for Bonding and Exterior Repair) material has shown multiuse capability for repair of small cracks and damage in reinforced carbon-carbon (RCC) material. The concept consists of preparing an adhesive paste of desired ceramic with appropriate additives and then applying the paste to the damaged/cracked area of the RCC composites with an adhesive delivery system. The adhesive paste cures at 100-120 C and transforms into a high temperature ceramic during reentry conditions. A number of plasma torch and ArcJet tests were carried out to evaluate the crack repair capability of GRABER materials for Reinforced Carbon-Carbon (RCC) composites. For the large area repair applications, Integrated Systems for Tile and Leading Edge Repair (InSTALER) have been developed and evaluated under various ArcJet testing conditions. In this presentation, performance of the repair materials as applied to RCC is discussed. Additionally, critical in-space repair needs and technical challenges are reviewed.

  17. The effects of transcutaneous electrical nerve stimulation on tissue repair: A literature review

    PubMed Central

    Machado, Aline Fernanda Perez; Santana, Eduardo Ferreira; Tacani, Pascale Mutti; Liebano, Richard Eloin

    2012-01-01

    BACKGROUND: Transcutaneous electrical nerve stimulation (TENS) consists of a generic application of low-frequency, pulsed electrical currents transmitted by electrodes through the skin surface. It is a therapeutic modality that is nonpharmacological, noninvasive, inexpensive, easy to use and widely applied in clinical practice. OBJECTIVE: To narratively review the scientific evidence of the effects of TENS on tissue repair with respect to wound healing, skin flap viability and tendinous repair. METHODS: The study was conducted using the MEDLINE, Lilacs and Scielo databases, without limit to the period of publication, and was completed in November 2011. Inclusion criteria were randomized or nonrandomized, controlled or noncontrolled clinical trials, and experimental trials involving rats subjected to TENS for tissue repair. RESULTS: Thirty articles on tissue repair were found and, among these, 14 reported on wound healing, 14 reported on skin flaps and two analyzed tedinous repair. DISCUSSION: It was suggested that TENS stimulates skin wound healing and tendon repair, as well as the viability of random skin flaps. Such effects may be due to the release of substance P and calcitonin gene-related peptide, which would increase blood flow and, consequently, hasten the events leading to tissue repair. CONCLUSIONS: Based on the scientific evidence regarding the effects of TENS on tissue repair, the findings of the present literature review were inconclusive because data from the randomized controlled clinical trials were insufficient to confirm such effects. PMID:24294017

  18. Cell resistance to the Cytolethal Distending Toxin involves an association of DNA repair mechanisms

    PubMed Central

    Bezine, Elisabeth; Malaisé, Yann; Loeuillet, Aurore; Chevalier, Marianne; Boutet-Robinet, Elisa; Salles, Bernard; Mirey, Gladys; Vignard, Julien

    2016-01-01

    The Cytolethal Distending Toxin (CDT), produced by many bacteria, has been associated with various diseases including cancer. CDT induces DNA double-strand breaks (DSBs), leading to cell death or mutagenesis if misrepaired. At low doses of CDT, other DNA lesions precede replication-dependent DSB formation, implying that non-DSB repair mechanisms may contribute to CDT cell resistance. To address this question, we developed a proliferation assay using human cell lines specifically depleted in each of the main DNA repair pathways. Here, we validate the involvement of the two major DSB repair mechanisms, Homologous Recombination and Non Homologous End Joining, in the management of CDT-induced lesions. We show that impairment of single-strand break repair (SSBR), but not nucleotide excision repair, sensitizes cells to CDT, and we explore the interplay of SSBR with the DSB repair mechanisms. Finally, we document the role of the replicative stress response and demonstrate the involvement of the Fanconi Anemia repair pathway in response to CDT. In conclusion, our work indicates that cellular survival to CDT-induced DNA damage involves different repair pathways, in particular SSBR. This reinforces a model where CDT-related genotoxicity primarily involves SSBs rather than DSBs, underlining the importance of cell proliferation during CDT intoxication and pathogenicity. PMID:27775089

  19. In-Space Repair of Reinforced Carbon-Carbon Thermal Protection System Structures

    NASA Technical Reports Server (NTRS)

    Singh, Mrityunjay

    2006-01-01

    Advanced repair and refurbishment technologies are critically needed for the thermal protection system of current space transportation system as well as for future Crew Exploration Vehicles (CEV). The damage to these components could be caused by impact during ground handling or due to falling of ice or other objects during launch. In addition, in-orbit damage includes micrometeoroid and orbital debris impact as well as different factors (weather, launch acoustics, shearing, etc.) during launch and re-entry. The GRC developed GRABER (Glenn Refractory Adhesive for Bonding and Exterior Repair) material has shown multiuse capability for repair of small cracks and damage in reinforced carbon-carbon (RCC) material. The concept consists of preparing an adhesive paste of desired ceramic with appropriate additives and then applying the paste to the damaged/cracked area of the RCC composites with adhesive delivery system. The adhesive paste cures at 100-120 C and transforms into a high temperature ceramic during simulated entry conditions. A number of plasma torch and ArcJet tests were carried out to evaluate the crack repair capability of GRABER materials for Reinforced Carbon-Carbon (RCC) composites. For the large area repair applications, integrated system for tile and leading edge repair (InSTALER) have been developed. In this presentation, critical in-space repair needs and technical challenges as well as various issues and complexities will be discussed along with the plasma performance and post test characterization of repaired RCC materials.

  20. Saccharomyces cerevisiae Ku70 potentiates illegitimate DNA double-strand break repair and serves as a barrier to error-prone DNA repair pathways.

    PubMed Central

    Boulton, S J; Jackson, S P

    1996-01-01

    Ku, a heterodimer of polypeptides of approximately 70 kDa and 80 kDa (Ku70 and Ku80, respectively), binds avidly to DNA double-strand breaks (DSBs). Mammalian cells defective in Ku are hypersensitive to ionizing radiation due to a deficiency in DSB repair. Here, we show that the simple inactivation of the Saccharomyces cerevisiae Ku70 homologue (Yku70p), does not lead to increased radiosensitivity. However, yku70 mutations enhance the radiosensitivity of rad52 strains, which are deficient in homologous recombination. Through establishing a rapid and reproducible in vivo plasmid rejoining assay, we show that Yku70p plays a crucial role in the repair of DSBs bearing cohesive termini. Whereas this damage is repaired accurately in YKU70 backgrounds, in yku70 mutant strains terminal deletions of up to several hundred bp occur before ligation ensues. Interestingly, this error-prone DNA repair pathway utilizes short homologies between the two recombining molecules and is thus highly reminiscent of a predominant form of DSB repair that operates in vertebrates. These data therefore provide evidence for two distinct and evolutionarily conserved illegitimate recombination pathways. One of these is accurate and Yku70p-dependent, whereas the other is error-prone and Yku70-independent. Furthermore, our studies suggest that Yku70 promotes genomic stability both by promoting accurate DNA repair and by serving as a barrier to error-prone repair processes. Images PMID:8890183

  1. Lead - nutritional considerations

    MedlinePlus

    Lead poisoning - nutritional considerations; Toxic metal - nutritional considerations ... utensils . Old paint poses the greatest danger for lead poisoning , especially in young children. Tap water from lead ...

  2. DNA Repair Is Associated with Information Content in Bacteria, Archaea, and DNA Viruses.

    PubMed

    Acosta, Sharlene; Carela, Miguelina; Garcia-Gonzalez, Aurian; Gines, Mariela; Vicens, Luis; Cruet, Ricardo; Massey, Steven E

    2015-01-01

    The concept of a "proteomic constraint" proposes that DNA repair capacity is positively correlated with the information content of a genome, which can be approximated to the size of the proteome (P). This in turn implies that DNA repair genes are more likely to be present in genomes with larger values of P. This stands in contrast to the common assumption that informational genes have a core function and so are evenly distributed across organisms. We examined the presence/absence of 18 DNA repair genes in bacterial genomes. A positive relationship between gene presence and P was observed for 17 genes in the total dataset, and 16 genes when only nonintracellular bacteria were examined. A marked reduction of DNA repair genes was observed in intracellular bacteria, consistent with their reduced value of P. We also examined archaeal and DNA virus genomes, and show that the presence of DNA repair genes is likewise related to a larger value of P. In addition, the products of the bacterial genes mutY, vsr, and ndk, involved in the correction of GC/AT mutations, are strongly associated with reduced genome GC content. We therefore propose that a reduction in information content leads to a loss of DNA repair genes and indirectly to a reduction in genome GC content in bacteria by exposure to the underlying AT mutation bias. The reduction in P may also indirectly lead to the increase in substitution rates observed in intracellular bacteria via loss of DNA repair genes.

  3. Laparoscopic repair of inguinal hernia in adults

    PubMed Central

    Yang, Xue-Fei

    2016-01-01

    Laparoscopic repair of inguinal hernia is mini-invasive and has confirmed effects. The procedures include intraperitoneal onlay mesh (IPOM) repair, transabdominal preperitoneal (TAPP) repair and total extraperitoneal (TEP) repair. These procedures have totally different anatomic point of view, process and technical key points from open operations. The technical details of these operations are discussed in this article, also the strategies of treatment for some special conditions. PMID:27867954

  4. Computer Equipment Repair Curriculum Guide.

    ERIC Educational Resources Information Center

    Reneau, Fred; And Others

    This guide is intended for use in a course to train students to repair computer equipment and perform related administrative and customer service tasks. Addressed in the individual units are the following topics (with selected subtopics in brackets): performing administrative functions (preparing service bills, maintaining accounts and labor…

  5. Microwave Oven Repair. Teacher Edition.

    ERIC Educational Resources Information Center

    Smreker, Eugene

    This competency-based curriculum guide for teachers addresses the skills a technician will need to service microwave ovens and to provide customer relations to help retain the customer's confidence in the product and trust in the service company that performs the repair. The guide begins with a task analysis, listing 20 cognitive tasks and 5…

  6. Anodization As A Repair Technique

    NASA Technical Reports Server (NTRS)

    Groff, Roy E.; Maloney, Robert D.; Reeser, Robert W.

    1988-01-01

    Thin, hard oxide layer added to aluminum part. Surfaces on aluminum part worn out of tolerance by no more than 0.004 in. often repaired by anodizing to build up aluminum oxide layers. Oxide layers very hard and grounded to desired final dimensions.

  7. How the Brain Repairs Stuttering

    ERIC Educational Resources Information Center

    Kell, Christian A.; Neumann, Katrin; von Kriegstein, Katharina; Posenenske, Claudia; von Gudenberg, Alexander W.; Euler, Harald; Giraud, Anne-Lise

    2009-01-01

    Stuttering is a neurodevelopmental disorder associated with left inferior frontal structural anomalies. While children often recover, stuttering may also spontaneously disappear much later after years of dysfluency. These rare cases of unassisted recovery in adulthood provide a model of optimal brain repair outside the classical windows of…

  8. The Role of Backup NHEJ Repair in Creating Genomic Instability in CML

    DTIC Science & Technology

    2008-03-01

    repair pathway. WRN, a protein, which is found deleted in the accelerated aging disease, Werner’s syndrome is a newly found constituent of this complex...to be involved in a minor “back-up” NHEJ repair pathway. WRN, a protein, which is found deleted in the accelerated aging disease, Werner’s syndrome...protein complex plays a role in creating DSB repair infidelity, leading to mutations and deletions . (A) siRNA down-regulation of WRN and DNA ligase

  9. Fanconi anaemia and the repair of Watson and Crick DNA crosslinks.

    PubMed

    Kottemann, Molly C; Smogorzewska, Agata

    2013-01-17

    The function of Fanconi anaemia proteins is to maintain genomic stability. Their main role is in the repair of DNA interstrand crosslinks, which, by covalently binding the Watson and the Crick strands of DNA, impede replication and transcription. Inappropriate repair of interstrand crosslinks causes genomic instability, leading to cancer; conversely, the toxicity of crosslinking agents makes them a powerful chemotherapeutic. Fanconi anaemia proteins can promote stem-cell function, prevent tumorigenesis, stabilize replication forks and inhibit inaccurate repair. Recent advances have identified endogenous aldehydes as possible culprits of DNA damage that may induce the phenotypes seen in patients with Fanconi anaemia.

  10. Endovascular exclusion of patch aneurysms of intercostal arteries after thoracoabdominal aortic aneurysm repair.

    PubMed

    Juthier, Francis; Rousse, Natacha; Banfi, Carlo; Beregi, Jean-Paul; Vincentelli, André; Prat, Alain; Bachet, Jean

    2013-02-01

    Reimplantation of the largest patent intercostal arteries is usually performed during thoracoabdominal aortic aneurysm repair. This may lead to aneurysmal evolution of the intercostal arteries patch. We report the successful percutaneous endovascular repair in 4 Marfan patients of aneurysms of the intercostal arteries patch that developed after thoracoabdominal aortic aneurysm repair (Crawford type II) during a mean delay of 70 months (range, 48 to 91 months). All patients had previously undergone one or several aortic surgical procedures and had patent subclavian and hypogastric arterial networks. No in-hospital deaths or spinal cord ischemic injuries occurred, which emphasizes the importance of the vascular collateral network.

  11. Fix-It Careers: Jobs in Repair

    ERIC Educational Resources Information Center

    Torpey, Elka Maria

    2010-01-01

    From auto mechanic to HVAC technicians, many occupations require repair skills. For jobseekers with the right skills, there are many advantages to a repair career. Repair work provides millions of jobs throughout the United States. Wages are often higher than average. And in many occupations, the employment outlook is bright. Plus, most repair…

  12. Welding/brazing for Space Station repair

    NASA Technical Reports Server (NTRS)

    Dickinson, David W.; Babel, H. W.; Conaway, H. R.; Hooper, W. H.

    1990-01-01

    Viewgraphs on welding/brazing for space station repair are presented. Topics covered include: fabrication and repair candidates; debris penetration of module panel; welded repair patch; mechanical assembly of utility fluid line; space station utility systems; Soviet aerospace fabrication - an overview; and processes under consideration.

  13. Standardized Curriculum for Small Engine Repair.

    ERIC Educational Resources Information Center

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    This curriculum guide for small engine repair was developed by the state of Mississippi to standardize vocational education course titles and core contents. The objectives contained in this document are common to all small engine repair programs in the state. The guide contains objectives for small engine repair I and II courses. Units in course I…

  14. Standardized Curriculum for Automotive Body Repair.

    ERIC Educational Resources Information Center

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: automotive body repair I and II. The nine units in automotive body repair I are as follows: introduction; related information; basic tool usage and safety; body and frame construction; basic sheet metal repair; preparing for…

  15. 30 CFR 57.14104 - Tire repairs.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Tire repairs. 57.14104 Section 57.14104 Mineral... Devices and Maintenance Requirements § 57.14104 Tire repairs. (a) Before a tire is removed from a vehicle for tire repair, the valve core shall be partially removed to allow for gradual deflation and...

  16. 30 CFR 56.14104 - Tire repairs.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Tire repairs. 56.14104 Section 56.14104 Mineral... Devices and Maintenance Requirements § 56.14104 Tire repairs. (a) Before a tire is removed from a vehicle for tire repair, the valve core shall be partially removed to allow for gradual deflation and...

  17. Standardized Curriculum for Shoe and Boot Repair.

    ERIC Educational Resources Information Center

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    This curriculum guide for shoe and boot repair was developed by the state of Mississippi to standardize vocational education course titles and core contents. The objectives contained in this document are common to all shoe and boot repair programs in the state. The guide contains objectives for shoe and boot repair I and II courses. Units in…

  18. Hsp90: A New Player in DNA Repair?

    PubMed Central

    Pennisi, Rosa; Ascenzi, Paolo; di Masi, Alessandra

    2015-01-01

    Heat shock protein 90 (Hsp90) is an evolutionary conserved molecular chaperone that, together with Hsp70 and co-chaperones makes up the Hsp90 chaperone machinery, stabilizing and activating more than 200 proteins, involved in protein homeostasis (i.e., proteostasis), transcriptional regulation, chromatin remodeling, and DNA repair. Cells respond to DNA damage by activating complex DNA damage response (DDR) pathways that include: (i) cell cycle arrest; (ii) transcriptional and post-translational activation of a subset of genes, including those associated with DNA repair; and (iii) triggering of programmed cell death. The efficacy of the DDR pathways is influenced by the nuclear levels of DNA repair proteins, which are regulated by balancing between protein synthesis and degradation as well as by nuclear import and export. The inability to respond properly to either DNA damage or to DNA repair leads to genetic instability, which in turn may enhance the rate of cancer development. Multiple components of the DNA double strand breaks repair machinery, including BRCA1, BRCA2, CHK1, DNA-PKcs, FANCA, and the MRE11/RAD50/NBN complex, have been described to be client proteins of Hsp90, which acts as a regulator of the diverse DDR pathways. Inhibition of Hsp90 actions leads to the altered localization and stabilization of DDR proteins after DNA damage and may represent a cell-specific and tumor-selective radiosensibilizer. Here, the role of Hsp90-dependent molecular mechanisms involved in cancer onset and in the maintenance of the genome integrity is discussed and highlighted. PMID:26501335

  19. Cleft palate repair and variations

    PubMed Central

    Agrawal, Karoon

    2009-01-01

    Cleft palate affects almost every function of the face except vision. Today a child born with cleft palate with or without cleft lip should not be considered as unfortunate, because surgical repair of cleft palate has reached a highly satisfactory level. However for an average cleft surgeon palatoplasty remains an enigma. The surgery differs from centre to centre and surgeon to surgeon. However there is general agreement that palatoplasty (soft palate at least) should be performed between 6-12 months of age. Basically there are three groups of palatoplasty techniques. One is for hard palate repair, second for soft palate repair and the third based on the surgical schedule. Hard palate repair techniques are Veau-Wardill-Kilner V-Y, von Langenbeck, two-flap, Aleveolar extension palatoplasty, vomer flap, raw area free palatoplasty etc. The soft palate techniques are intravelar veloplasty, double opposing Z-plasty, radical muscle dissection, primary pharyngeal flap etc. And the protocol based techniques are Schweckendiek's, Malek's, whole in one, modified schedule with palatoplasty before lip repair etc. One should also know the effect of each technique on maxillofacial growth and speech. The ideal technique of palatoplasty is the one which gives perfect speech without affecting the maxillofacial growth and hearing. The techniques are still evolving because we are yet to design an ideal one. It is always good to know all the techniques and variations so that one can choose whichever gives the best result in one's hands. A large number of techniques are available in literature, and also every surgeon incorporates his own modification to make it a variation. However there are some basic techniques, which are described in details which are used in various centres. Some of the important variations are also described. PMID:19884664

  20. Lead and Your Baby

    MedlinePlus

    ... yourself and your family from lead in drinking water? Drinking water may contain lead if you have ... yourself and your family from lead in drinking water? Drinking water may contain lead if you have ...