Effects of endocrine disrupting chemicals from leather industry effluents on male reproductive system.

PubMed

Kumar, Vikas; Majumdar, Chandrajeetbalo; Roy, Partha

2008-09-01

The leather tanning industry is characterized by the production of different kinds of effluents, generated in each step of leather processing. These effluents have various chemical compounds which may cause toxicity and endocrine disruption and are thus known as endocrine disrupting chemicals (EDC). This study was aimed to examine the androgenic potential of leather industry effluents collected from northern region of India. Hershberger assay data showed a significant increase (p<0.05) in the weight and structure of sex accessory tissues of castrated rats. Reverse transcriptase polymerase chain reaction (RT-PCR) analysis demonstrated a significant change (p<0.05) in the expression patterns of the major steroidogenic enzymes in adrenal and testes namely, cytochrome P450scc, 3beta-hydroxysteroid dehydrogenase, 17beta-hydroxysteroid dehydorgenase in castrated and intact rats. This was further supported by increased enzymatic activities measured in vitro spectrophotometrically. Serum hormone profile demonstrated a dose dependent increase in testicular and adrenal testosterone productions in intact and castrated rats, respectively. This was further supported by decreased level of gonadotrophic hormones (LH and FSH) in treated groups of animals. Further, the effluent treatment resulted in the development of hyperplasia in seminiferous tubules of testes in treated rats as evident from histopathological studies and about two-fold increases in daily sperm production. On analysis of water samples using GC-MS, it was found to contain various aromatic compounds (nonylphenol, hexaclrobenzene and several azo dyes) some of which independently demonstrated similar effects as shown by water samples. Our data suggests that the effluents from leather industry have potential EDC demonstrating androgenic activities.

Estimation of Managerial and Technical Personnel Requirements in Selected Industries. Training for Industry Series, No. 2.

ERIC Educational Resources Information Center

United Nations Industrial Development Organization, Vienna (Austria).

The need to develop managerial and technical personnel in the cement, fertilizer, pulp and paper, sugar, leather and shoe, glass, and metal processing industries of various nations was studied, with emphasis on necessary steps in developing nations to relate occupational requirements to technology, processes, and scale of output. Estimates were…

Effect of leather industry effluents on soil microbial and protease activity.

PubMed

Pradeep, M Reddi; Narasimha, G

2012-01-01

Release of leather industry effluents into the agricultural fields causes indicative changes in nutrient cycling and organic matter processing. In the present study, leather industry effluent discharged soil (test) and undischarged soil(control) were collected from the surrounding areas of industry. The physico-chemical, biological properties and soil protease activity were examined. The study reflected the average mean value of pH, electrical conductivity and water holding capacity of the test soil was found to be 7.94, 0.89 microMhos cm(-1) and 0.51 ml g(-1), respectively. In chemical parameters, organic matter, total nitrogen, phosphorus and potassium has the mean of 6.73%, 0.23 g kg(-1), 4.28 mg g(-1) and 28 microg g(-1), respectively. In all the respects, the test soil showed higher values than the control. The soil protease enzyme activity was determined by using substrate casein and the activity was found to be higher (180 microg TE g(-1) 24 hr(-1)) in test soil than the control soil (63 microg TE g(-1) 24 hr(-1)).

Effects of pretanning processes on collagen structure and reactivity

USDA-ARS?s Scientific Manuscript database

The cattle hide, a major byproduct of the US meat industry, is the tanner’s substrate, and also the source of collagen for the food and biomaterials industries. Conversion of animal hides into leather is a multistep process that continually evolves in response to economic and environmental concerns...

Characterization of mechanical properties of leather with airborne ultrasonics

USDA-ARS?s Scientific Manuscript database

A nondestructive method to accurately evaluate the quality of hides and leather is urgently needed by leather and hide industries. We previously reported the research results for airborne ultrasonic (AU) testing using non-contact transducers to evaluate the quality of hides and leather. The abilit...

Fabrication of silver nanoparticle sponge leather with durable antibacterial property.

PubMed

Liu, Gongyan; Haiqi, Gao; Li, Kaijun; Xiang, Jun; Lan, Tianxiang; Zhang, Zongcai

2018-03-15

Leather product with durable antibacterial property is of great interest both from industry and consumer's point of view. To fabricate such functional leather, gallic acid modified silver nanoparticles (GA@AgNPs) were first in situ synthesized with a core-shell structure and an average size of 15.3nm. Due to its hydrophilic gallic acid surface, the GA@AgNPs possessed excellent stability and dispersibility in wide pH range from 3 to 12 and also showed effective antibacterial activity with a minimum inhibitory concentration (MIC) of around 10μgmL -1 . Then, such GA@AgNPs were used as retanning agent to be successfully filled into leather matrix during the leather manufacturing process. Moreover, taking the advantage of its high surface density of carboxyl groups, these GA@AgNPs could be further chemically cross-linked onto collagen fibers by chrome tanning agent. After retanning, the resultant leather was given a "AgNPs sponge" feature with high payload of silver nanoparticles against laundry, exhibiting high and durable antibacterial activity. Copyright © 2017 Elsevier Inc. All rights reserved.

Production of basic chromium sulfate by using recovered chromium from ashes of thermally treated leather.

PubMed

Dettmer, Aline; Nunes, Keila Guerra Pacheco; Gutterres, Mariliz; Marcílio, Nilson Romeu

2010-04-15

Leather wastes tanned with chromium are generated during the production process of leather, hence the wastes from hand crafted goods and footwear industries are a serious environmental problem. The thermal treatment of leather wastes can be one of the treatment options because the wastes are rich in chromium and can be used as a raw material for sodium chromate production and further to obtain several chromium compounds. The objective of this study was to utilize the chromium from leather wastes via basic chromium sulfate production to be subsequently applied in a hide tanning. The obtained results have shown that this is the first successful attempt to achieve desired base properties of the product. The result was achieved when the following conditions were applied: a molar ratio between sodium sulfite and sodium dichromate equal to 6; reaction time equal to 5 min before addition of sulfuric acid; pH of sodium dichromate solution equal to 2. Summarizing, there is an opportunity to utilize the dangerous wastes and reused them in the production scheme by minimizing or annulling the environmental impact and to attend a sustainable process development concept. 2009 Elsevier B.V. All rights reserved.

Ultrasound assisted chrome tanning: Towards a clean leather production technology.

PubMed

Mengistie, Embialle; Smets, Ilse; Van Gerven, Tom

2016-09-01

Nowadays, there is a growing demand for a cleaner, but still effective alternative for production processes like in the leather industry. Ultrasound (US) assisted processing of leather might be promising in this sense. In the present paper, the use of US in the conventional chrome tanning process has been studied at different pH, temperature, tanning time, chrome dose and US exposure time by exposing the skin before tanning and during tanning operation. Both prior exposure of the skin to US and US during tanning improves the chrome uptake and reduces the shrinkage significantly. Prior exposure of the skin to US increase the chrome uptake by 13.8% or reduces the chrome dose from 8% to 5% (% based on skin weight) and shorten the process time by half while US during tanning increases the chrome uptake by 28.5% or reduces the chrome dose from 8% to 4% (half) and the tanning time to one third compared to the control without US. Concomitantly, the resulting leather quality (measured as skin shrinkage) improved from 5.2% to 3.2% shrinkage in the skin exposed to US prior tanning and to 1.3% in the skin exposed to US during the tanning experiment. This study confirms that US chrome tanning is an effective and eco-friendly tanning process which can produce a better quality leather product in a shorter process time with a lower chromium dose. Copyright © 2016 Elsevier B.V. All rights reserved.

Valorization of titanium metal wastes as tanning agent used in leather industry.

PubMed

Crudu, Marian; Deselnicu, Viorica; Deselnicu, Dana Corina; Albu, Luminita

2014-10-01

The development of new tanning agents and new technologies in the leather sector is required to cope with the increasingly higher environmental pressure on the current tanning materials and processes such as tanning with chromium salts. In this paper, the use of titanium wastes (cuttings) resulting from the process of obtaining highly pure titanium (ingots), for the synthesis of new tanning agent and tanning bovine hides with new tanning agent, as alternative to tanning with chromium salts are investigated. For this purpose, Ti waste and Ti-based tanning agent were characterized for metal content by inductively coupled plasma mass spectrometry (ICP-MS) and chemical analysis; the tanned leather (wet white leather) was characterized by Scanning Electron Microscope/Energy Dispersive Using X-ray (Analysis). SEM/EDX analysis for metal content; Differential scanning calorimetric (DSC), Micro-Hot-Table and standard shrinkage temperature showing a hydrothermal stability (ranged from 75.3 to 77°C) and chemical analysis showing the leather is tanned and can be processed through the subsequent mechanical operations (splitting, shaving). On the other hand, an analysis of major minor trace substances from Ti-end waste (especially vanadium content) in new tanning agent and wet white leather (not detected) and residue stream was performed and showed that leachability of vanadium is acceptable. The results obtained show that new tanning agent obtained from Ti end waste can be used for tanning bovine hides, as eco-friendly alternative for chrome tanning. Copyright © 2014 Elsevier Ltd. All rights reserved.

Formation of PCDD and PCDF in the thermal treatment of footwear leather wastes.

PubMed

Godinho, Marcelo; Marcilio, Nilson Romeu; Masotti, Leonardo; Martins, Celso Brisolara; Ritter, Diego Elias; Wenzel, Bruno München

2009-08-15

The leather waste generated by the footwear industry is considered dangerous due to the presence of trivalent chromium, derived from the salt utilized to tan hides. In Brazil, the majority of this waste is disposed on landfills and only about 3% are recycled. The thermal treatment is an alternative method for purification of such residues. By using this technique it is possible to generate energy and recover the chromium present in the ash for the production of basic chromium sulfate (tanning industry), high carbon ferrochromium or carbon-free ferrochromium (steel industry). In the last 10 years, the gasification and combustion of footwear leather waste have been intensively studied at the Federal University of Rio Grande do Sul. The research experiment for characterization of the emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) were carried out in a semi-pilot unit (350 kW(th)). From new investments the thermal capacity of the unit will increase to 600 kW(th). The unit will produce power from the heat generated in the combustion. The experimental results indicated that during the thermal treatment of footwear leather wastes, the formation mechanism of PCDD/F is the de novo synthesis. Most of PCDD/F were found in the particulate phase (>95%). A kinetic model was used for discussion of the achieved experimental results. The model is based in the carbon gasification, PCDD/F formation, desorption and degradation. From the conclusions obtained in this work will be possible minimize the PCDD/F formation in process of combustion of footwear leather wastes.

Biodegradability of tannin-containing wastewater from leather industry.

PubMed

He, Qiang; Yao, Kai; Sun, Danhong; Shi, Bi

2007-08-01

Tannins occur commonly in the wastewaters from forestry, plant medicine, paper and leather industries. The treatment of this kind of wastewaters, including settling and biodegradation, is usually difficult because tannins are highly soluble in water and would inhibit the growth of microorganisms in activated sludge. The objective of this study is to investigate biodegradability of tannin-containing wastewaters, so as to characterize the pollution properties of such wastewaters and provide a reference for their biological treatment in wastewater treatment plants. The research was typified by using the wastewater collected from vegetable tanning process in leather industry. A model was developed to describe the activated sludge process, and the biodegradation kinetics of vegetable tanning wastewater (VET wastewater) was studied. It was found that the biodegradability of tannin-containing wastewater varies heavily with the content of tannins in wastewater. The biodegradation of VET wastewater with tannin content around 4,900 mg/l occurred inefficiently due to the inhibition of tannins to the activated sludge process, and only 34.7% of biodegradation extent was reached in 14 days of incubation. The optimal biodegradability of VET wastewater was observed when its tannin content was diluted to 490 mg/l, where the COD and tannin removals reached 51.3% and 45.1% respectively in 6 days. Hence, it is suggested that a proper control of tannin content is necessary to achieve an effective biodegradation of tannin-containing wastewaters in wastewater treatment plants.

[Leather bags production: organization study, general identification of hazards, biomechanical overload risk pre-evaluation using an easily applied evaluation tool].

PubMed

Montomoli, Loretta; Coppola, Giuseppina; Sarrini, Daniela; Sartorelli, P

2011-01-01

Craft industries are the backbone of the Italian manufacturing system and in this sector the leather trade plays a crucial role. The aim of the study was to experiment with a risk pre-mapping data sheet in leather bag manufacture by analyzing the production cycle. The prevalence of biomechanical, organizational and physical factors was demonstrated in tanneries. With regard to chemical agents the lack of any priority of intervention could be due to the lack of information on the chemicals used. In the 2 enterprises that used mechanical processes the results showed different priorities for intervention and a different level of the extent of such intervention. In particular in the first enterprise biomechanical overload was a top priority, while in the second the results were very similar to those of the tannery. The analysis showed in both companies that there was a high prevalence of risk of upper limb biomechanical overload in leather bag manufacture. Chemical risk assessment was not shown as a priority because the list of chemicals used was neither complete nor sufficient. The risk pre-mapping data sheet allowed us to obtain a preliminary overview of all the major existing risks in the leather industry. Therefore the method can prove a useful tool for employers as it permits instant identification of priorities for intervention for the different risks.

Thermal valorization of footwear leather wastes in bubbling fluidized bed combustion.

PubMed

Bahillo, A; Armesto, L; Cabanillas, A; Otero, J

2004-01-01

Transformation of hide (animal skins) into leather is a complicated process during which significant amounts of wastes are generated. Footwear is the sector that consumes the major part of leather (60%). Logically, this industry is producing the largest quantity of leather wastes. The objective of this work was to demonstrate the technical feasibility of fluidized bed technology to recover the energy from burning footwear leather wastes. Considering the characteristics of leather waste, especially the heating value (12.5-21 MJ/kg), it can be considered a fairly good fuel. Moreover, leather waste has suitable characteristics for combustion, e.g., high volatile matter (76.5%) and low ash content (5.2%). Two factors deserve special attention: N3O and NOx emissions as a consequence of its unusual high nitrogen content (14.1%) and the chromium speciation because chromium is the main element of ash (3.2%) due to its use in leather tanning. A series of experiments has been carried out in a 0.1 MWt bubbling fluidized bed pilot plant. The combustion efficiency, flue gas composition and chromium speciation were investigated. Despite having high nitrogen content, a low conversion rate of fuel-N to NOx and N2O was attained. Chromium was concentrated in the solid streams and it was consistently found as Cr(III+); no presence of Cr(VI+) was detected.

Complex coacervation of collagen hydrolysate extracted from leather solid wastes and chitosan for controlled release of lavender oil.

PubMed

Ocak, Buğra

2012-06-15

In the world, approximately 600,000 metric tonnes of chromium-containing solid wastes are generated by the leather industry each year. Environmental concerns and escalating landfill costs are becoming increasingly serious problems to the leather industry and seeking solutions to these problems is a prime concern in much research today. In this study, solid collagen-based protein hydrolysate was isolated from chromium-tanned leather wastes and its chemical properties were determined. Microcapsules of collagen hydrolysate (CH) - chitosan (C) crosslinked with glutaraldehyde (GA) containing Lavender oil (LO) were prepared by complex coacervation method. The effects of various processing parameters, including the CH to C ratio, LO content, and GA, on the oil load (%), oil content (%), encapsulation efficiency (%) and release rate of LO from microcapsules were investigated. As the ratio of C present in the CH/C mixture and crosslinking density increased, the release rate of LO from microcapsules slowed down. Optical and scanning electron microscopy images illustrated that the LO microcapsules were spherical in shape. Fourier transform infrared spectroscopy (FTIR) studies confirmed that there was no significant interaction between CH/C complex and LO. Copyright © 2012 Elsevier Ltd. All rights reserved.

Detection of hazardous pollutants in chrome-tanned leather using locally developed laser-induced breakdown spectrometer.

PubMed

Nasr, M M; Gondal, Mohammed Asharf; Seddigi, Z S

2011-04-01

Highly toxic contaminants like Cr, As, and Pb were detected in chrome-tanning process of animal skin to produce leather by applying locally developed laser-induced breakdown spectrometer. An Nd-YAG laser with 1,064 nm wavelength was focused on the surface of leather samples (natural and manufactured) to generate a plasma spark and spectrally resolved spectra were used for identification and quantification of contaminants. The leather samples were collected from a tannery located in industrial cities of Riyadh and Jeddah, Saudi Arabia. The study was carried out on fully, half manufactured (wet blue leather), and natural hide (skin). To the best of our knowledge, this is the first attempt where laser-induced breakdown spectroscopy (LIBS) technique has been applied for the analysis of leather before and after tanning process. The maximum concentration of different elements of environmental significance like chromium, lead, arsenic, sulfur, magnesium were 199, 289, 31, 38, and 39 ppm, respectively, in one of the manufactured leather samples. The limit of detection (LOD) of our LIBS system for chromium, lead, arsenic, sulfur, and magnesium were 2, 3, 1.5,7, and 3 ppm, respectively. The safe permissible limit for tanned leather for highly toxic elements like chromium, lead, and arsenic are 1, 0.5, 0.01 ppm, respectively, as prescribed in Environmental Regulation Standards for Saudi Industries set by Royal Commission Jubail, Saudi Arabia. The LIBS technique is superior to other conventional techniques like ICP or atomic absorption that a little or no sample preparation is required, no chemicals are needed, multi-elemental analysis is possible for all kinds of samples (natural and anthropogenic materials), microgram of sample is essential, and LIBS could be applied for remote analysis. It is highly selective and sensitivity higher than ICP, and as no sample and chemicals are required, it is cost effective for multi-sample analysis per unit time as compared with other conventional techniques. The concentration of some toxic elements (Cr, Pb, As) is much higher than the safe permissible limits set by Occupational Safety and Health Administration in USA or Saudi environmental regulatory agencies. Results obtained with our LIBS systems were in close agreement with the results obtained using other standard analytical technique such as the inductively coupled plasma atomic emission spectroscopy.

Leather mechanical properties estimated from airborne ultrasonic testing of hides

USDA-ARS?s Scientific Manuscript database

Animal hides are the highest value byproducts of the meat industry. The U.S. beef industry produces approximately 32 million cattle hides annually. Nearly 90% of the cattle hides are exported for processing to countries with lower labor costs and less restrictive environmental policies. This resea...

Automated packing systems: review of industrial implementations

NASA Astrophysics Data System (ADS)

Whelan, Paul F.; Batchelor, Bruce G.

1993-08-01

A rich theoretical background to the problems that occur in the automation of material handling can be found in operations research, production engineering, systems engineering and automation, more specifically machine vision, literature. This work has contributed towards the design of intelligent handling systems. This paper will review the application of these automated material handling and packing techniques to industrial problems. The discussion will also highlight the systems integration issues involved in these applications. An outline of one such industrial application, the automated placement of shape templates on to leather hides, is also discussed. The purpose of this system is to arrange shape templates on a leather hide in an efficient manner, so as to minimize the leather waste, before they are automatically cut from the hide. These pieces are used in the furniture and car manufacturing industries for the upholstery of high quality leather chairs and car seats. Currently this type of operation is semi-automated. The paper will outline the problems involved in the full automation of such a procedure.

Vermicomposting as an advanced biological treatment for industrial waste from the leather industry.

PubMed

Nunes, Ramom R; Bontempi, Rhaissa M; Mendonça, Giovane; Galetti, Gustavo; Rezende, Maria Olímpia O

2016-01-01

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.

Solid waste from leather industry as adsorbent of organic dyes in aqueous-medium.

PubMed

Oliveira, Luiz C A; Gonçalves, Maraísa; Oliveira, Diana Q L; Guerreiro, Mário C; Guilherme, Luiz R G; Dallago, Rogério M

2007-03-06

The industrial tanning of leather usually produces considerable amounts of chromium-containing solid waste and liquid effluents and raises many concerns on its environmental effect as well as on escalating landfill costs. Actually, these shortcomings are becoming increasingly a limiting factor to this industrial activity that claims for alternative methods of residue disposals. In this work, it is proposed a novel alternative destination of the solid waste, based on the removal of organic contaminants from the out coming aqueous-residue. The adsorption isotherm pattern for the wet blue leather from the Aurea tanning industry in Erechim-RS (Brazil) showed that these materials present high activity on adsorbing the reactive red textile dye as well as other compounds. The adsorbent materials were characterized by IR spectroscopy and SEM and tested for the dye adsorption (reactive textile and methylene blue dyes). The concentrations of dyes were measured by UV-vis spectrophotometry and the chromium extraction from leather waste was realized by basic hydrolysis and determined by atomic absorption. As a low cost abundant adsorbent material with high adsorption ability on removing dye methylene blue (80mgg(-1)) and textile dye reactive red (163mgg(-1)), the leather waste is revealed to be a interesting alternative relatively to more costly adsorbent materials.

Preparation of biobased sponges from un-tanned hides

USDA-ARS?s Scientific Manuscript database

One of our research endeavors to address ongoing challenges faced by the U.S. hide and leather industries is to develop innovative uses and novel biobased products from hides to improve prospective markets and to secure a viable future for hides and leather industries. We had previously investigate...

Effects of Milling on the Fibrous Structure and Mechanical Behaviors of a Collagen Material--Leather

USDA-ARS?s Scientific Manuscript database

Leather, a fibrous collagen material, is a high value coproduct of the meat industry. Milling is being practiced in the tannery to mechanically tumble and therefore soften leather for adequate stiffness and feel. However, there is no report regarding its effects on the structure change and physica...

Octylisothiazolinone, an additional cause of allergic contact dermatitis caused by leather: case series and potential implications for the study of cross-reactivity with methylisothiazolinone.

PubMed

Aerts, Olivier; Meert, Hans; Romaen, Elien; Leysen, Julie; Matthieu, Lucretia; Apers, Sandra; Lambert, Julien; Goossens, An

2016-11-01

Octylisothiazolinone (OIT) is used as an antifungal agent by the leather industry. To show sensitization to OIT from leather, and to highlight the potential implications when cross-reactivity between OIT and methylisothiazolinone (MI) is studied. Two patients with allergic contact dermatitis caused by a leather belt and shoes, respectively, were patch tested with methylchloroisothiazolinone (MCI)/MI, MI, MCI, OIT, and benzisothiazolinone (BIT). High-performance liquid chromatography with ultraviolet detection (HPLC-UV) was used to detect isothiazolinone derivatives in leather goods. Additionally, files of OIT-sensitized patients, observed at the KU Leuven department during the period 1990-2015, were retrospectively analysed. Both patients had been primarily sensitized to OIT, but the diagnosis in one of them could be achieved only when a higher patch test concentration of OIT (1000 ppm pet.) was used. HPLC-UV confirmed the presence of OIT in their leather goods. Non-relevant sensitization to MI was noted in both cases. Four additional cases of OIT sensitization from leather could be retrieved from the KU Leuven database. Non-occupational sensitization to OIT from leather may occur. Patch test concentrations of >250 ppm pet. may be necessary for diagnosis, and to show cross-reactivity with MI. Safer use limits for OIT in the leather industry may be needed. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Nasal cancer in the Northamptonshire boot and shoe industry: is it declining?

PubMed Central

Acheson, E. D.; Pippard, E. C.; Winter, P. D.

1982-01-01

This paper reports a survey of nasal cancer in Northamptonshire during the period 1950-79. An increased risk of various histological types of nasal tumour has been observed within the footwear manufacturing industry, which seems to be limited to the minority of men and women exposed to the dust of leather soles and heels. In Northamptonshire this exposure has usually occurred in the preparation, press and finishing rooms of factories making boots and shoes by the welted process. This type of leather is tanned by treatment with vegetable extracts, not chrome salts. Although the population of workers involved has diminished over the period of the study there has been no evidence of a decline in incidence of these tumours within it. PMID:7150487

The physical properties, morphology and viscoelasticity of biobased sponges prepared from un-tanned hides

USDA-ARS?s Scientific Manuscript database

One of our research endeavors to address ongoing challenges faced by the U.S. hide and leather industries is to develop innovative uses and novel biobased products from hides to improve prospective markets and to secure a viable future for hides and leather industries. We had previously investigate...

Silicate enhanced enzymatic dehairing: a new lime-sulfide-free process for cowhides.

PubMed

Saravanabhavan, Subramani; Thanikaivelan, Palanisamy; Rao, Jonnalagadda Raghava; Nair, Balachandran Unni

2005-05-15

A conventional dehairing process with sodium sulfide and lime is a major source of the pollution from the tanning industry. In other words, conventional dehairing processes degrade the hair to the extent that it cannot be recovered; thus, these processes become a major contributor to wastewater pollution. In this study, an attempt has been made to develop a lime and sulfide-free dehairing process using a commercial enzyme formulation with the activation of a silicate salt. A dip and pile method of application has been standardized. The amount of enzyme and sodium metasilicate has also been optimized based on complete removal of hair. Enhancement of enzyme activity by the addition of silicate has been demonstrated through activity measurements. Hair removal is found to be complete using scanning electron microscope analysis. Strength and bulk properties of the experimental leathers are comparable to that of control leathers. The process enjoys a significant reduction in chemical oxygen demand (COD) and total solids (TS) by 53 and 26%, respectively. More importantly, the application of enzyme for dehairing results in an 8% area increase in the final leather. Also, the process is proven to be techno-economically feasible.

Hypertension in leather tanning workers working in Istanbul, Turkey.

PubMed

Ince, N; Işsever, H; Ince, H; Ozyildirim, B; Işik, E; Hapçioğlu, B; Ozdilli, K; Akçay, M E; Calak, B; Agkoç, N

2008-11-01

Leather tanning may result in various occupational diseases. The aim of this study was to compare the relation between blood pressure levels and vocations in leather tanning. Our study was conducted in Turkey's leading leather process plant located in Tuzla organised industry zone, between March 11 and May 30, 2005. All leather plants that consented to participate in our study were included. The blood pressure, height and weight of the workers were measured. Their ages, educational levels, smoking habits and hypertension history were obtained via interviewing the subjects. The relation between three main factors, i.e. age, body mass index (BMI), working period, and hypertension were analysed through multiple logistic regression analysis. 40.4 percent (295) of 730 workers' blood pressure values were found to be within normal limits. 59.6 percent (435) were found to be hypertensive. The hypertension correlation remained significant, along with BMI and their working period (p-values were 0.0001 and 0.035, respectively). Our study demonstrated that BMI and working period have a key influence on the increased risk of hypertension, which leads us to consider the importance of occupational exposure. Different hypertension studies to be conducted in various occupational fields would likely be able to confirm our findings.

Reversing the conventional leather processing sequence for cleaner leather production.

PubMed

Saravanabhavan, Subramani; Thanikaivelan, Palanisamy; Rao, Jonnalagadda Raghava; Nair, Balachandran Unni; Ramasami, Thirumalachari

2006-02-01

Conventional leather processing generally involves a combination of single and multistep processes that employs as well as expels various biological, inorganic, and organic materials. It involves nearly 14-15 steps and discharges a huge amount of pollutants. This is primarily due to the fact that conventional leather processing employs a "do-undo" process logic. In this study, the conventional leather processing steps have been reversed to overcome the problems associated with the conventional method. The charges of the skin matrix and of the chemicals and pH profiles of the process have been judiciously used for reversing the process steps. This reversed process eventually avoids several acidification and basification/neutralization steps used in conventional leather processing. The developed process has been validated through various analyses such as chromium content, shrinkage temperature, softness measurements, scanning electron microscopy, and physical testing of the leathers. Further, the performance of the leathers is shown to be on par with conventionally processed leathers through bulk property evaluation. The process enjoys a significant reduction in COD and TS by 53 and 79%, respectively. Water consumption and discharge is reduced by 65 and 64%, respectively. Also, the process benefits from significant reduction in chemicals, time, power, and cost compared to the conventional process.

Preparation of nonwoven and green composites from collagen fibrous networks

USDA-ARS?s Scientific Manuscript database

The disposal of solid wastes, such as trimmings and splits generated in various manufacturing processes in a tannery is a serious challenge to the hides and leather industries. Most of these wastes are transported out of processing plants for landfills, not only incurring the expense of transportat...

Powdered hide for research on tanning mechanisms

USDA-ARS?s Scientific Manuscript database

The conversion of animal hides into leather, the most valuable coproduct of the US meat industry, is a multistep process that has evolved more as art form than as science. A variety of dehairing and other hide preparation processes have been adopted without an understanding of how they affect the c...

The footwear factory's assembly sector: opposing organizational structure and quality from the ergonomic work analysis.

PubMed

Silva, Kláudia M M N; Coelho, Bernardo G P; Junior, Josemir V S; Faria, Luiz F M; Dutra, Ludmila; Alvarenga, Marília; Roggini, Renan; Echternach, Eliza Helena de Oliveira

2012-01-01

Data from 2006 indicated that Brazilian footwear leather industry was composed of approximately 9,488 formally registered establishments, considering the leather industry, footwear and leather goods. It was responsible for 211,582 people employed. However, in spite of having many employees, this kind of organization found several problems when analyzed from the ergonomics view. With this premise, then, in order to identify bottlenecks and other engineering problems that could cause discomfort and motivation lack among workers, leading directly to the loss of the product quality, the assembly sector of women's shoes factory was characterized.

Anaerobic digestion of selected Italian agricultural and industrial residues (grape seeds and leather dust): combined methane production and digestate characterization.

PubMed

Caramiello, C; Lancellotti, I; Righi, F; Tatàno, F; Taurino, R; Barbieri, L

2013-01-01

A combined experimental evaluation of methane production (obtained by anaerobic digestion) and detailed digestate characterization (with physical-chemical, thermo-gravimetric and mineralogical approaches) was conducted on two organic substrates, which are specific to Italy (at regional and national levels). One of the substrates was grape seeds, which have an agricultural origin, whereas the other substrate was vegetable-tanned leather dust, which has an industrial origin. Under the assumed experimental conditions of the performed lab-scale test series, the grape seed substrate exhibited a resulting net methane production of 175.0 NmL g volatile solids (VS)(-1); hence, it can be considered as a potential energy source via anaerobic digestion. Conversely, the net methane production obtained from the anaerobic digestion of the vegetable-tanned leather dust substrate was limited to 16.1 NmL gVS(-1). A detailed characterization of the obtained digestates showed that there were both nitrogen-containing compounds and complex organic compounds present in the digestate that was obtained from the mixture of leather dust and inoculum. As a general perspective of this experimental study, the application of diversified characterization analyzes could facilitate (1) a better understanding of the main properties of the obtained digestates to evaluate their potential valorization, and (2) a combination of the digestate characteristics with the corresponding methane productions to comprehensively evaluate the bioconversion process.

Transesterification reaction of the fat originated from solid waste of the leather industry.

PubMed

Işler, Asli; Sundu, Serap; Tüter, Melek; Karaosmanoğlu, Filiz

2010-12-01

The leather industry is an industry which generates a large amount of solid and liquid wastes. Most of the solid wastes originate from the pre-tanning processes while half of it comes from the fleshing step. Raw fleshing wastes which mainly consist of protein and fat have almost no recovery option and the disposal is costly. This study outlines the possibility of using the fleshing waste as an oil source for transesterification reaction. The effect of oil/alcohol molar ratio, the amount of catalyst and temperature on ester production was individually investigated and optimum reaction conditions were determined. The fuel properties of the ester product were also studied according to the EN 14214 standard. Cold filter plugging point and oxidation stability have to be improved in order to use the ester product as an alternative fuel candidate. Besides, this product can be used as a feedstock in lubricant production or cosmetic industry. Copyright © 2010 Elsevier Ltd. All rights reserved.

Cancer incidence and specific occupational exposures in the Swedish leather tanning industry: a cohort based case-control study.

PubMed Central

Mikoczy, Z; Schütz, A; Strömberg, U; Hagmar, L

1996-01-01

OBJECTIVE--To study the effect on the incidence of cancer of exposure to chemicals handled in the leather tanning industry. MATERIALS AND METHODS--A case-control study was performed within a cohort of 2487 workers employed for at least six months during the period 1900-89 in three Swedish leather tanneries. 68 cancer cases (lung, stomach, bladder, kidney, nasal, and pancreatic cancers and soft tissue sarcomas) and 178 matched controls were studied. Effects of chemical exposures on cancer incidence, adjusted for age at risk, sex, and plant were estimated with a conditional logistic regression model. RESULTS--A significant association was found between exposure to leather dust and pancreatic cancer (odds ratio (OR) 7.19, 95% confidence interval (95% CI) 1.44 to 35-89). An association was indicated between leather dust from vegetable tanning and lung cancer. After adjustment for smoking habits a tentative association between organic solvents and lung cancer lost its significance. No association was found between exposure to chlorophenols and soft tissue sarcomas. CONCLUSIONS--The significant association between leather tanning and soft tissue sarcomas that was found in our previous cohort analysis could not be explained by exposure to chlorophenols. On the other hand a significant association was found between exposure to leather dust and pancreatic cancer, and exposure to leather dust from vegetable tanning was often present in cases with lung cancer. Due to the small numbers of cases, the results can, however, only lead to tentative conclusions. PMID:8704870

Fruit Leathers: Method of Preparation and Effect of Different Conditions on Qualities

PubMed Central

Diamante, Lemuel M.; Bai, Xue; Busch, Janette

2014-01-01

Fruit leathers are dehydrated fruit products which are eaten as snacks or desserts. They are flexible sheets that have a concentrated fruit flavor and nutritional aspects. Most fruit leathers are prepared by mixing fruit puree and other additives like sugar, pectin, acid, glucose syrup, color, and potassium metabisulphite and then dehydrating them under specific conditions. Various drying systems including combined convective and far-infrared drying, hot air drying, microwave drying, solar drying, and sun drying have been used to make fruit leathers. Most fruit leathers are dried at 30 to 80°C for up to 24 hours until the target final moisture content (12–20%) has been reached. Research about fruit leathers began in the 1970s. This work has reviewed published papers on fruit leathers in order to summarize useful information about fruit leathers on methods of preparation, effects of drying condition, and effects of packaging and storage, which will be useful to many in the food industry and consumers who are health-conscious. PMID:26904618

Latex peptidases of Calotropis procera for dehairing of leather as an alternative to environmentally toxic sodium sulfide treatment.

PubMed

Lopéz, Laura M I; Viana, Carolina A; Errasti, María E; Garro, María L; Martegani, José E; Mazzilli, Germán A; Freitas, Cléverson D T; Araújo, Ídila M S; da Silva, Rafaela O; Ramos, Márcio V

2017-09-01

Dehairing of crude leather is a critical stage performed at the beginning of its processing to obtain industrially useful pieces. Tanneries traditionally apply a chemical process based on sodium sulfide. Since this chemical reactive is environmentally toxic and inefficiently recycled, innovative protocols for reducing or eliminating its use in leather depilation are welcomed. Therefore, latex peptidases from Calotropis procera (CpLP) and Cryptostegia grandiflora (CgLP) were assayed for this purpose. Enzyme activity on substrates representative of skin such as hide powder azure (U HPA ), elastin (U E ), azocollagen (U AZOCOL ), keratin (U K ), and epidermis (U EP ) was determined, while depilation activity was assayed on cow hide. Only CpLP was active against keratin (13.4 U K ) and only CgLP was active against elastin (0.12 U E ). CpLP (93.0 U HPA , 403.6 U AZOCOL , 36.3 U EP ) showed higher activity against the other substrates than CgLP (47.6 U HPA , 261.5 U AZOCOL , 8.5 U EP ). In pilot assays, CpLP (0.05% w/v with sodium sulfite 0.6% w/v as activator) released hairs from cow hide pieces. Macroscopic and microscopic analyses of the hide revealed that the dehairing process was complete and the leather structure was preserved. The proteolytic system of C. procera is a suitable bioresources to be exploited by tanneries.

Green route for the utilization of chrome shavings (chromium-containing solid waste) in tanning industry.

PubMed

Rao, Jonnalagadda Raghava; Thanikaivelan, Palanisamy; Sreeram, Kalarical Janardhanan; Nair, Balachandran Unni

2002-03-15

Chromium-containing wastes from various industrial sectors are under critical review. Leather processing is one such industrial activity that generates chromium-bearing wastes in different forms. One of them is chrome shavings, and this contributes to an extent of 10% of the quantum of raw skins/hides processed, amounting to 0.8 million ton globally. In this study, the high protein content of chrome shavings has been utilized for reduction of chromium(VI) in the preparation of chrome tanning agent. This approach has been exploited for the development of two products: one with chrome shavings alone as reducing agent and the other with equal proportion of chrome shavings and molasses. The developed products exhibit more masking due to the formation of intermediate organic oligopeptides. This has been corroborated through the spectral, hydrolysis, and species-wise distribution studies. The formation of these organic masking agents helps in chrome tanning by shifting the precipitation point of chromium to relatively higher pH levels. Hence, the developed products find use as chrome tanning agents for leather processing, thus providing a means for better utilization of chrome shaving wastes.

Box-Behnken methodology for Cr (VI) and leather dyes removal by an eco-friendly biosorbent: F. vesiculosus.

PubMed

Cobas, M; Sanromán, M A; Pazos, M

2014-05-01

This study focused on leather industrial effluents treatment by biosorption using Fucus vesiculosus as low-cost adsorbent. These effluents are yellowish-brown color and high concentration of Cr (VI). Therefore, biosorption process was optimized using response surface methodology based on Box-Behnken design operating with a simulated leather effluent obtained by mixture of Cr (VI) solution and four leather dyes. The key variables selected were initial solution pH, biomass dosage and CaCl2 concentration in the pretreatment stage. The statistical analysis shows that pH has a negligible effect, being the biomass dosage and CaCl2 concentration the most significant variables. At optimal conditions, 98% of Cr (VI) and 88% of dyes removal can be achieved. Freundlich fitted better to the obtained equilibrium data for all studied systems than Temkin, Langmuir or D-R models. In addition, the use of the final biosorbent as support-substrate to grown of enzyme producer fungi, Pleurotus ostreatus, was also demonstrated. Copyright © 2014 Elsevier Ltd. All rights reserved.

Recycling of solid waste rich in organic nitrogen from leather industry: mineral nutrition of rice plants.

PubMed

Nogueira, Francisco G E; Castro, Isabela A; Bastos, Ana R R; Souza, Guilherme A; de Carvalho, Janice G; Oliveira, Luiz C A

2011-02-28

The leather industry produces a large quantity of solid waste (wet blue leather), which contains a high amount of chromium. After its removal from wet blue leather, a solid collagenic material is recovered, containing high nitrogen levels, which can be used as a nitrogen source in agriculture. In order to take more advantage of the collagen, it was enriched with mineral P and K in order to produce NPK formulations. The objective was also to evaluate the efficiency of such formulations as a nutrient supply for rice plants in an Oxisoil, under greenhouse conditions. The application of PK enriched-collagen formulations resulted in N contents in the vegetative parts and grains of rice plants which were equivalent or superior to those obtained with urea and commercial NPK formulations. Copyright © 2010 Elsevier B.V. All rights reserved.

Separation of sodium chloride from the evaporated residue of the reverse osmosis reject generated in the leather industry--optimization by response surface methodology.

PubMed

Boopathy, R; Sekaran, G

2014-08-01

Reverse osmosis (RO) concentrate is being evaporated by solar/thermal evaporators to meet zero liquid discharge standards. The resulted evaporated residue (ER) is contaminated with both organic and inorganic mixture of salts. The generation of ER is exceedingly huge in the leather industry, which is being collected and stored under the shelter to avoid groundwater contamination by the leachate. In the present investigation, a novel process for the separation of sodium chloride from ER was developed, to reduce the environmental impact on RO concentrate discharge. The sodium chloride was selectively separated by the reactive precipitation method using hydrogen chloride gas. The selected process variables were optimized for maximum yield ofNaCl from the ER (optimum conditions were pH, 8.0; temperature, 35 degrees C; concentration of ER, 600 g/L and HCl purging time, 3 min). The recovered NaCl purity was verified using a cyclic voltagramm.

Sinos River Hydrographic Basin: urban occupation, industrialization and environmental memory.

PubMed

Nunes, M F; Figueiredo, J A S; Rocha, A L C

2015-12-01

This article presents an analysis of the process of industrialization and urbanization of the Sinos Valley in Rio Grande do Sul state, Brazil, starting from the establishment of leather goods and footwear manufacturing in the region during the 19th century when tanneries and factories producing footwear and/or components for footwear began to appear, and with special attention to aspects related to the environmental impact on the Sinos river hydrographic basin. The article is based on both bibliographic and documentary research and also draws on biographical narratives of workers with links to the leather goods and footwear industry obtained using ethnographic method. It was found that contemporary environmental conflicts emerge from within a memory of work and an environmental memory in which the factories, the unplanned urbanization, and the utilization of water and other natural resources form a chain of significance. Significance that precludes any form of fragmented analysis that isolates any of these aspects from the others: the economic, socio-historic, cultural, political, or the environmental.

Rapid and Accurate Identification of Animal Species in Natural Leather Goods by Liquid Chromatography/Mass Spectrometry

PubMed Central

Izuchi, Yukari; Takashima, Tsuneo; Hatano, Naoya

2016-01-01

The demand for leather goods has grown globally in recent years. Industry revenue is forecast to reach $91.2 billion by 2018. There is an ongoing labelling problem in the leather items market, in that it is currently impossible to identify the species that a given piece of leather is derived from. To address this issue, we developed a rapid and simple method for the specific identification of leather derived from cattle, horses, pigs, sheep, goats, and deer by analysing peptides produced by the trypsin-digestion of proteins contained in leather goods using liquid chromatography/mass spectrometry. We determined species-specific amino acid sequences by liquid chromatography/tandem mass spectrometry analysis using the Mascot software program and demonstrated that collagen α-1(I), collagen α-2(I), and collagen α-1(III) from the dermal layer of the skin are particularly useful in species identification. PMID:27313979

Green chemistry approaches to leather tanning process for making chrome-free leather by unnatural amino acids.

PubMed

Krishnamoorthy, G; Sadulla, S; Sehgal, P K; Mandal, Asit Baran

2012-05-15

In the present study, green and sustainable method or eco-friendly approaches to tanning process based on unnatural D-amino acids (D-AA)-aldehyde (Ald) as a substitute for chrome-free tanning has been attempted. The distribution of optically active D-AA in tanned leather, the hydrothermal stability, the mechanical properties and resistance to collagenolytic activity of tanned leather, the evaluation of eco-friendly characteristics were investigated. Scanning electron microscopic (SEM) and Atomic force microscopic (AFM) analyses indicate the surface morphology and roughness, respectively, of the tanned leather collagen matrix. Shrinkage and Differential scanning calorimetric (DSC) analyses shows that the shrinkage temperature (T(s)) and denaturation temperature (T(d)) of tanned leather are related to the content of D-AA+Ald present in the leather matrix. It has been found that the T(s) of D-AA tanned leather is more than that of Ald tanned leather and also more or less equal to chrome tanned leather. Environmental impact assessment (EIA) shows that the developed process results in significant reduction in total solids content (TSC) and improves better biodegradability of organic compound present in the effluent compared to chrome tanning. Copyright © 2012 Elsevier B.V. All rights reserved.

Sodium metasilicate based fiber opening for greener leather processing.

PubMed

Saravanabhavan, Subramani; Thanikaivelan, Palanisamy; Rao, Jonnalagadda Raghava; Nair, Balachandran Unni; Ramasamit, Thirumalachari

2008-03-01

Growing environmental regulations propound the need for a transformation in the current practice of leather making. The conventional dehairing and fiber opening process results in high negative impact on the environment because of its uncleanliness. This process accounts for most of the biochemical oxygen demand and chemical oxygen demand in tannery wastewater and generation of H2S gas. Hence, this study explores the use of a biological material and a nontoxic chemical for performing the above process more cleanly. In this study, the dehairing and fiber opening processes has been designed using enzyme and sodium metasilicate. The amount of sodium metasilicate required for fiber opening is standardized through the removal of proteoglycan, increase in weight, and bulk properties of leathers. It has been found that the extent of opening up of fiber bundles is comparable to that of conventionally processed leathers using a 2% sodium metasilicate solution. This has been substantiated through scanning electron microscopic analysis and softness measurements. The presence of silica in the crust leather enhances the bulk properties of the leather. This has been confirmed from the energy dispersive X-ray analysis. Performance of the leathers is shown to be on par with conventionally processed leathers through physical and hand evaluation. The process also exhibits significant reduction in chemical oxygen demand and total solid loads by 55 and 24%, respectively. Further, this newly developed process seems to be economically beneficial.

Artificially modified collagen fibril orientation affects leather tear strength.

PubMed

Kelly, Susyn J; Wells, Hannah C; Sizeland, Katie H; Kirby, Nigel; Edmonds, Richard L; Ryan, Tim; Hawley, Adrian; Mudie, Stephen; Haverkamp, Richard G

2018-07-01

Ovine leather has around half the tear strength of bovine leather and is therefore not suitable for high-value applications such as shoes. Tear strength has been correlated with the natural collagen fibril alignment (orientation index, OI). It is hypothesized that it could be possible to artificially increase the OI of the collagen fibrils and that an artificial increase in OI could increase tear strength. Ovine skins, after pickling and bating, were strained biaxially during chrome tanning. The strain ranged from 2 to 15% of the initial sample length, either uniformly in both directions by 10% or with 3% in one direction and 15% in the other. Once tanned, the leather tear strengths were measured and the collagen fibril orientation was measured using synchrotron-based small-angle X-ray scattering. The OI increased as a result of strain during tanning from 0.48 to 0.79 (P = 0.001) measured edge-on and the thickness-normalized tear strength increased from 27 to 43 N mm -1 (P < 0.001) after leather was strained 10% in two orthogonal directions. This is evidence to support a causal relationship between high OI (measured edge-on), highly influenced by thickness, and tear strength. It also provides a method to produce stronger leather. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Tensile properties of chrome tanned leather waste short fibre filled unsaturated polyester composite

NASA Astrophysics Data System (ADS)

Talib, Satariah; Romli, Ahmad Zafir; Saad, Siti Zaleha

2017-12-01

Waste leather from industries was commonly disposed via land filling or incineration where the oxidation of Cr III to Cr VI by oxidants (such as peroxides and hypohalide) can easily occur. Cr VI is well known as carcinogenic and mutagenic element where the excessive exposure to this element can be very harmful. As an alternative way, the leather waste from footwear industry was utilised as filler in unsaturated polyester composite (UPC). The leather waste was ground using 0.25 mm mesh size and used without any chemical treatment. The sample was fabricated via castingtechnique and the study was carried out at 1 wt%, 2 wt% and 3 wt% filler loading. The leather waste filled composites showed lower tensile strength and Young's modulus than the unfilled composite. The increasing loading amount of leather waste led to the decreased in tensile strength and Young's modulus. The tensile results was supported by the decreasing pattern of density result which indicates the increasing of void content as the filler loading increased. The results of glass transition temperature are also parallel to the tensile properties where the increasing filler loading had decreased the glass transition temperature. Based on the morphological observation on the fractured tensile sample, much severe filler agglomerations and higher amount of voids was observed at higher filler loading compared to the lower filler loading.

Chrome-tanned leather shavings as a filler of butadiene-acrylonitrile rubber.

PubMed

Przepiórkowska, A; Chrońska, K; Zaborski, M

2007-03-06

The noxious wastes from the tanning industry such as chrome-tanned leather shavings were used as the only filler of rubber mixes containing carboxylated butadiene-acrylonitrile rubber (XNBR) or butadiene-acrylonitrile rubber (NBR), and a dispersing agent Limanol PEV (Schill & Seilacher). The best form addition of leather powder to the rubber mixes is mixed the waste protein with zinc oxide. The leather powder added to the rubber mixes improves the mechanical properties: tensile strength (T(s)), elongation at break (epsilon(b)) and increase the cross-linking density of carboxylated XNBR and NBR rubber mixes. Satisfactory results of these studies are presented in this work.

Preparation of nonwoven and green composites from tannery solid wastes

USDA-ARS?s Scientific Manuscript database

The disposal of solid wastes, such as trimmings and splits generated in various manufacturing processes in a tannery, is a serious challenge to the hides and leather industries. Our effort to address this challenge is to develop new uses and novel biobased products from solid wastes to improve prosp...

The problems of professional training of practice-oriented specialists for small enterprises of footwear and leather production industries in Uzbekistan

NASA Astrophysics Data System (ADS)

Ilkhamova, M. U.; Gafurov, J. K.; Maksudova, U. M.; Vassiliadis, S.

2017-10-01

At the present, the State authorities of the Republic of Uzbekistan pay special attention to the development of small and medium businesses and, in particular, to the enterprises oriented on manufacturing products with high added value. The leather and footwear industry of Uzbekistan is one of the dynamically developing sectors of economy. However, the study of the situation demonstrates that the increase in number of small and medium footwear and leather enterprises that have taken place in recent years, is not accompanied by a formation of corresponding professional training system for the enterprises, especially for associate specialists. The analysis of the legal base disclosed that the professional training level in footwear industry enterprises does not meet the up-to-date manufacturing requirements. The study is devoted to the issues of professional training of practice-oriented staff - the specialists for small enterprises of footwear and leather industry. The main task is the development of new vocational courses and programs for the training and professional development of personnel at all levels. The basic stages of complete staff training cycle for footwear sector have been determined based on the practical experience of staff training for small footwear enterprises in Greece. The 3-6 months duration short-term courses recommended for associate and medium level specialists have been developed and evaluated.

40 CFR Table 1 to Subpart Tttt of... - Leather Finishing HAP Emission Limits for Determining the Allowable HAP Loss

Code of Federal Regulations, 2013 CFR

2013-07-01

... Product Process Operation HAP Emission Limit (pounds of HAP loss per 1,000 square feet of leather processed) Existingsources Newsources 1. Upholstery Leather (≥4 grams add-on/square feet) 2.6 0.5 2. Upholstery Leather (square feet) 6.8 2.5 3. Water-resistant (≥5,000 Maeser Flexes)/Specialty...

40 CFR Table 1 to Subpart Tttt of... - Leather Finishing HAP Emission Limits for Determining the Allowable HAP Loss

Code of Federal Regulations, 2012 CFR

2012-07-01

... Product Process Operation HAP Emission Limit (pounds of HAP loss per 1,000 square feet of leather processed) Existingsources Newsources 1. Upholstery Leather (≥4 grams add-on/square feet) 2.6 0.5 2. Upholstery Leather (square feet) 6.8 2.5 3. Water-resistant (≥5,000 Maeser Flexes)/Specialty...

40 CFR Table 1 to Subpart Tttt of... - Leather Finishing HAP Emission Limits for Determining the Allowable HAP Loss

Code of Federal Regulations, 2014 CFR

2014-07-01

... Product Process Operation HAP Emission Limit (pounds of HAP loss per 1,000 square feet of leather processed) Existingsources Newsources 1. Upholstery Leather (≥4 grams add-on/square feet) 2.6 0.5 2. Upholstery Leather (square feet) 6.8 2.5 3. Water-resistant (≥5,000 Maeser Flexes)/Specialty...

Production of Thermoalkaliphilic Lipase from Geobacillus thermoleovorans DA2 and Application in Leather Industry.

PubMed

Abol Fotouh, Deyaa M; Bayoumi, Reda A; Hassan, Mohamed A

2016-01-01

Thermophilic and alkaliphilic lipases are meeting a growing global attention as their increased importance in several industrial fields. Over 23 bacterial strains, novel strain with high lipolytic activity was isolated from Southern Sinai, Egypt, and it was identified as Geobacillus thermoleovorans DA2 using 16S rRNA as well as morphological and biochemical features. The lipase was produced in presence of fatty restaurant wastes as an inducing substrate. The optimized conditions for lipase production were recorded to be temperature 60°C, pH 10, and incubation time for 48 hrs. Enzymatic production increased when the organism was grown in a medium containing galactose as carbon source and ammonium phosphate as nitrogen source at concentrations of 1 and 0.5% (w/v), respectively. Moreover, the optimum conditions for lipase production such as substrate concentration, inoculum size, and agitation rate were found to be 10% (w/v), 4% (v/v), and 120 rpm, respectively. The TA lipase with Triton X-100 had the best degreasing agent by lowering the total lipid content to 2.6% as compared to kerosene (7.5%) or the sole crude enzyme (8.9%). It can be concluded that the chemical leather process can be substituted with TA lipase for boosting the quality of leather and reducing the environmental hazards.

40 CFR 63.5340 - How do I determine the allowable HAP loss?

Code of Federal Regulations, 2010 CFR

2010-07-01

... appropriate HAP emission limit, expressed in pounds of HAP loss per 1,000 square feet of leather processed... the annual total of leather processed in 1,000's of square feet for each product process operation in... of square feet of leather processed in the previous 12 months in product process operation “i”. HAP...

40 CFR 63.5340 - How do I determine the allowable HAP loss?

Code of Federal Regulations, 2011 CFR

2011-07-01

... appropriate HAP emission limit, expressed in pounds of HAP loss per 1,000 square feet of leather processed... the annual total of leather processed in 1,000's of square feet for each product process operation in... of square feet of leather processed in the previous 12 months in product process operation “i”. HAP...

Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan.

PubMed

Junaid, Muhammad; Malik, Riffat Naseem; Pei, De-Sheng

2017-07-01

Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals' exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation. Copyright © 2017 Elsevier Ltd. All rights reserved.

40 CFR 63.5400 - How do I measure the quantity of leather processed?

Code of Federal Regulations, 2012 CFR

2012-07-01

... leather processed? 63.5400 Section 63.5400 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... area of each piece of processed or shipped leather with a computer scanning system accurate to 0.1 square feet. The computer scanning system must be initially calibrated for minimum accuracy to the...

40 CFR 63.5400 - How do I measure the quantity of leather processed?

Code of Federal Regulations, 2014 CFR

2014-07-01

... leather processed? 63.5400 Section 63.5400 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... area of each piece of processed or shipped leather with a computer scanning system accurate to 0.1 square feet. The computer scanning system must be initially calibrated for minimum accuracy to the...

40 CFR 63.5400 - How do I measure the quantity of leather processed?

Code of Federal Regulations, 2013 CFR

2013-07-01

... leather processed? 63.5400 Section 63.5400 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... area of each piece of processed or shipped leather with a computer scanning system accurate to 0.1 square feet. The computer scanning system must be initially calibrated for minimum accuracy to the...

40 CFR 63.5400 - How do I measure the quantity of leather processed?

Code of Federal Regulations, 2011 CFR

2011-07-01

... leather processed? 63.5400 Section 63.5400 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... processed or shipped leather with a computer scanning system accurate to 0.1 square feet. The computer scanning system must be initially calibrated for minimum accuracy to the manufacturer's specifications. For...

40 CFR 63.5400 - How do I measure the quantity of leather processed?

Code of Federal Regulations, 2010 CFR

2010-07-01

... leather processed? 63.5400 Section 63.5400 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... processed or shipped leather with a computer scanning system accurate to 0.1 square feet. The computer scanning system must be initially calibrated for minimum accuracy to the manufacturer's specifications. For...

Chemical and biological treatment technologies for leather tannery chemicals and wastewaters: a review.

PubMed

Lofrano, Giusy; Meriç, Sureyya; Zengin, Gülsüm Emel; Orhon, Derin

2013-09-01

Although the leather tanning industry is known to be one of the leading economic sectors in many countries, there has been an increasing environmental concern regarding the release of various recalcitrant pollutants in tannery wastewater. It has been shown that biological processes are presently known as the most environmental friendly but inefficient for removal of recalcitrant organics and micro-pollutants in tannery wastewater. Hence emerging technologies such as advanced oxidation processes and membrane processes have been attempted as integrative to biological treatment for this sense. This paper, as the-state-of-the-art, attempts to revise the over world trends of treatment technologies and advances for pollution prevention from tannery chemicals and wastewater. It can be elucidated that according to less extent advances in wastewater minimization as well as in leather production technology and chemicals substitution, biological and chemical treatment processes have been progressively studied. However, there has not been a full scale application yet of those emerging technologies using advanced oxidation although some of them proved good achievements to remove xenobiotics present in tannery wastewater. It can be noted that advanced oxidation technologies integrated with biological processes will remain in the agenda of the decision makers and water sector to apply the best prevention solution for the future tanneries. Copyright © 2013 Elsevier B.V. All rights reserved.

Proteolytic extracts of three Bromeliaceae species as eco-compatible tools for leather industry.

PubMed

Errasti, María Eugenia; Caffini, Néstor Oscar; López, Laura María Isabel

2018-01-02

Most tanneries use high proportions of Na 2 S and CaO during the dehairing step, resulting in effluents of high alkalinity and large amounts of suspended solid, besides the risk of liberating the toxic H 2 S. Solid waste rich in protein is another environmental problem of tanneries. Enzymes are an interesting technological tool for industry due to their biodegradability, nontoxic nature, and nonpolluting effluent generation. In the leather industry, proteases have been chosen as a promising eco-friendly alternative to Na 2 S/CaO dehairing. Extracts with high proteolytic activity have been obtained from fruits of Bromeliaceae species: Bromelia balansae Mez (Bb), Bromelia hieronymi Mez (Bh), and Pseudananas macrodontes (Morr.) Harms (Pm). In this work, Bb, Bh, and Pm have been studied for application in the leather industry, focusing in their dehairing properties. Enzymatic activities were measured against collagen, keratin, elastin, and epidermis while a dehairing assay was performed by employing cowhide. All extracts showed similar activity on collagen and epidermis, while Bh and Pm were the most active against keratin at the same caseinolytic unit (CU) values; Bh was the only extract active against elastin. Bb (1 CU/ml), Bh (1.5 CU/ml), and Pm (0.5 CU/ml) were able to depilate cowhide. Desirable characteristics of dehairing were observed for all extracts since hair pores did not show residual hair, grain surface was clean and intact, and collagen fiber bundles of dermis were not damaged. In conclusion, results here presented show that proteolytic extracts of Bromeliaceae species are promising eco-compatible tools for leather industry.

Effects of bating, pickling and crosslinking treatments on the characteristics of fibrous networks from un-tanned hides

USDA-ARS?s Scientific Manuscript database

Globalization of production and markets for raw animal hides and finished leather products has resulted in new challenges to the U.S. hide and leather industries. These challenges include overcoming relatively high U.S. energy and labor costs; meeting environmental imperatives; quantifying, maintai...

Stabilization of chromium: an alternative to make safe leathers.

PubMed

Gong, Ying; Liu, Xiaoling; Huang, Li; Chen, Wuyong

2010-07-15

In this study, the original causes for hexavalent chromium presence in the leather were first evaluated by ageing of chromium(III) solutions and chrome tanned hide powder (50 degrees C, UV lightening at 340 nm, 0-36 h). The results showed that the trivalent chromium at instable coordination state was easy to convert into hexavalent chromium in high pH environment, and the probability of the oxidation increased in this order: multi-coordinate chromium, mono-coordinate chromium, and free chromium. For this reason, the process for stabilizing chromium in the leather was designed with the specific material, which was mostly consisted of the reducers and the chelating agents. After treated with the developed process, these leathers were aged (50 degrees C, UV irradiance as 0.68 W/m(2) at 340 nm, 0-72 h) to estimate chromium(VI) presence. Hexavalent chromium was not found in these treated leathers even if the leathers were aged for 72 h. Moreover, the physical and mechanical properties for the leathers varied little after treating. In a word, an inherent safe and effective process was proved to avoid the formation of hexavalent chromium in the leather. 2010 Elsevier B.V. All rights reserved.

Algae in the assessment of industrial effluents: case study in Southern Bengal, India.

PubMed

Sen Sarkar, Neera; Bandyopadhyaya, Tuli; Datta, Shilpa; Das, Swapna

2013-01-01

This article is an assessment of the diversity of scum and bloom algae encountered in different industrial effluents of Southern Bengal, India, analyzing their habitat and correlating the habitat ecology of each study site. The study was conducted during the period May 2009 to August 2010. The study sites include effluent release areas of the dairy industry, a distillery unit, the leather industry, and an herbal medicine unit. Habitat were analyzed for pH, dissolved oxygen, biological oxygen demand, salinity, alkalinity, and phosphate and nitrate levels. Correlation coefficients were calculated for habitat parameters and algae encountered, showing a significant positive correlation between the richness of dominant and subdominant species with biochemical oxygen demand and salinity and a significant negative correlation with alkalinity, phosphates, and the nitrate-to-phosphate ratio. The richness of dominant and subdominant species in the effluent discharge areas show average values of 9 and 5 in the distillery unit, 8 and 5 in the dairy industry, 7 and 8 in the leather industry, and 5 and 9 in the herbal medicine unit, respectively, with a few (ranging between 3 and 7) co-occurring species in each case. The algal groups encountered were cyanobacteria, euglenophytes, chlorophytes, and bacillariophytes, showing Palmer's Algal Pollution Index of 15 in the dairy industry, 20 in the distillery unit, 28 in the leather industry, and 8 in the herbal medicine unit.

40 CFR Table 1 to Subpart Tttt of... - Leather Finishing HAP Emission Limits for Determining the Allowable HAP Loss

Code of Federal Regulations, 2011 CFR

2011-07-01

... Operation HAP Emission Limit (pounds of HAP loss per 1,000 square feet of leather processed) Existingsources Newsources 1. Upholstery Leather (≥4 grams add-on/square feet) 2.6 0.5 2. Upholstery Leather (square feet) 6.8 2.5 3. Water-resistant (≥5,000 Maeser Flexes)/Specialty Leather 5.6 4.9 4. Nonwater...

40 CFR Table 1 to Subpart Tttt of... - Leather Finishing HAP Emission Limits for Determining the Allowable HAP Loss

Code of Federal Regulations, 2010 CFR

2010-07-01

... Operation HAP Emission Limit (pounds of HAP loss per 1,000 square feet of leather processed) Existingsources Newsources 1. Upholstery Leather (≥4 grams add-on/square feet) 2.6 0.5 2. Upholstery Leather (square feet) 6.8 2.5 3. Water-resistant (≥5,000 Maeser Flexes)/Specialty Leather 5.6 4.9 4. Nonwater...

Evaluate the use of tanning agent in leather industry using material flow analysis, life cycle assessment and fuzzy multi-attribute decision making (FMADM)

NASA Astrophysics Data System (ADS)

Alfarisi, Salman; Sutono, Sugoro Bhakti; Sutopo, Wahyudi

2017-11-01

Tanning industry is one of the companies that produce many pollutants and cause the negative impact on the environment. In the production process of tanning leather, the use of input material need to be evaluated. The problem of waste, not only have a negative impact on the environment, but also human health. In this study, the impact of mimosa as vegetable tanning agent evaluated. This study will provide alternative solutions for improvements to the use of vegetable tanning agent. The alternative solution is change mimosa with indusol, gambier, and dulcotan. This study evaluate the vegetable tanning of some aspects using material flow analysis and life cycle assessment approach. Life cycle assessment (LCA) is used to evaluate the environmental impact of vegetable tanning agent. Alternative solution selection using fuzzy multi-attribute decision making (FMADM) approach. Results obtained by considering the environment, human toxicity, climate change, and marine aquatic ecotoxicity, is to use dulcotan.

40 CFR 63.5340 - How do I determine the allowable HAP loss?

Code of Federal Regulations, 2013 CFR

2013-07-01

... select the appropriate HAP emission limit, expressed in pounds of HAP loss per 1,000 square feet of... months. Next, determine the annual total of leather processed in 1,000's of square feet for each product... Total of Leather Processed = 1,000's of square feet of leather processed in the previous 12 months in...

40 CFR 63.5340 - How do I determine the allowable HAP loss?

Code of Federal Regulations, 2014 CFR

2014-07-01

... select the appropriate HAP emission limit, expressed in pounds of HAP loss per 1,000 square feet of... months. Next, determine the annual total of leather processed in 1,000's of square feet for each product... Total of Leather Processed = 1,000's of square feet of leather processed in the previous 12 months in...

Analysis of fabric materials cut using ultraviolet laser ablation

NASA Astrophysics Data System (ADS)

Tsai, Hsin-Yi; Yang, Chih-Chung; Hsiao, Wen-Tse; Huang, Kuo-Cheng; Andrew Yeh, J.

2016-04-01

Laser ablation technology has widely been applied in the clothing industry in recent years. However, the laser mechanism would affect the quality of fabric contours and its components. Hence, this study examined carbonization and oxidation conditions and contour variation in nonwoven, cotton, and composite leather fabrics cut by using an ultraviolet laser at a wavelength of 355 nm. Processing parameters such as laser power, pulse frequency, scanning speed, and number of pulses per spot were adjusted to investigate component variation of the materials and to determine suitable cutting parameters for the fabrics. The experimental results showed that the weights of the component changed substantially by pulse frequency but slightly by laser power, so pulse frequency of 100 kHz and laser power of 14 W were the approximate parameters for three fabrics for the smaller carbonization and a sufficient energy for rapidly cutting, which the pulse duration of laser system was fixed at 300 μs and laser irradiance was 0.98 J/mm2 simultaneously. In addition, the etiolate phenomenon of nonwoven was reduced, and the component weight of cotton and composite leather was closed to the value of knife-cut fabric as the scanning speed increased. The approximate scanning speed for nonwoven and composite leather was 200 mm/s, and one for cotton was 150 mm/s, respectively. The sharper and firmer edge is obtained by laser ablation mechanism in comparison with traditional knife cutting. Experimental results can serve as the reference for laser cutting in the clothing industry, for rapidly providing smoother patterns with lower carbonization and oxidation edge in the fashion industry.

Production of Thermoalkaliphilic Lipase from Geobacillus thermoleovorans DA2 and Application in Leather Industry

PubMed Central

Abol Fotouh, Deyaa M.; Bayoumi, Reda A.; Hassan, Mohamed A.

2016-01-01

Thermophilic and alkaliphilic lipases are meeting a growing global attention as their increased importance in several industrial fields. Over 23 bacterial strains, novel strain with high lipolytic activity was isolated from Southern Sinai, Egypt, and it was identified as Geobacillus thermoleovorans DA2 using 16S rRNA as well as morphological and biochemical features. The lipase was produced in presence of fatty restaurant wastes as an inducing substrate. The optimized conditions for lipase production were recorded to be temperature 60°C, pH 10, and incubation time for 48 hrs. Enzymatic production increased when the organism was grown in a medium containing galactose as carbon source and ammonium phosphate as nitrogen source at concentrations of 1 and 0.5% (w/v), respectively. Moreover, the optimum conditions for lipase production such as substrate concentration, inoculum size, and agitation rate were found to be 10% (w/v), 4% (v/v), and 120 rpm, respectively. The TA lipase with Triton X-100 had the best degreasing agent by lowering the total lipid content to 2.6% as compared to kerosene (7.5%) or the sole crude enzyme (8.9%). It can be concluded that the chemical leather process can be substituted with TA lipase for boosting the quality of leather and reducing the environmental hazards. PMID:26881066

Tannin fingerprinting in vegetable tanned leather by solid state NMR spectroscopy and comparison with leathers tanned by other processes.

PubMed

Romer, Frederik H; Underwood, Andrew P; Senekal, Nadine D; Bonnet, Susan L; Duer, Melinda J; Reid, David G; van der Westhuizen, Jan H

2011-01-28

Solid state ¹³C-NMR spectra of pure tannin powders from four different sources--mimosa, quebracho, chestnut and tara--are readily distinguishable from each other, both in pure commercial powder form, and in leather which they have been used to tan. Groups of signals indicative of the source, and type (condensed vs. hydrolyzable) of tannin used in the manufacture are well resolved in the spectra of the finished leathers. These fingerprints are compared with those arising from leathers tanned with other common tanning agents. Paramagnetic chromium (III) tanning causes widespread but selective disappearance of signals from the spectrum of leather collagen, including resonances from acidic aspartyl and glutamyl residues, likely bound to Cr (III) structures. Aluminium (III) and glutaraldehyde tanning both cause considerable leather collagen signal sharpening suggesting some increase in molecular structural ordering. The ²⁷Al-NMR signal from the former material is consistent with an octahedral coordination by oxygen ligands. Solid state NMR thus provides easily recognisable reagent specific spectral fingerprints of the products of vegetable and some other common tanning processes. Because spectra are related to molecular properties, NMR is potentially a powerful tool in leather process enhancement and quality or provenance assurance.

Mortality of tanners.

PubMed Central

Pippard, E C; Acheson, E D; Winter, P D

1985-01-01

The mortality of 833 male tannery workers known to have been employed in the industry in 1939 and who were followed up to the end of 1982 was studied. A total of 573 men had been employed in making leather tanned by vegetable extracts for soles and heels, and 260 men had used chrome tanning to make leather for the upper parts of shoes. No significant excesses of deaths were found for any of the common sites of cancer in either group of workers. One death from nasal cancer (0.21 expected) was reported among the men who worked with sole and heel leather. PMID:3978050

Low-Dose N,N-Dimethylformamide Exposure and Liver Injuries in a Cohort of Chinese Leather Industry Workers.

PubMed

Qi, Cong; Gu, Yiyang; Sun, Qing; Gu, Hongliang; Xu, Bo; Gu, Qing; Xiao, Jing; Lian, Yulong

2017-05-01

We assessed the risk of liver injuries following low doses of N,N-dimethylformamide (DMF) below threshold limit values (20 mg/m) among leather industry workers and comparison groups. A cohort of 429 workers from a leather factory and 466 non-exposed subjects in China were followed for 4 years. Poisson regression and piece-wise linear regression were used to examine the relationship between DMF and liver injury. Workers exposed to a cumulative dose of DMF were significantly more likely than non-exposed workers to develop liver injury. A nonlinear relationship between DMF and liver injury was observed, and a threshold of the cumulative DMF dose for liver injury was 7.30 (mg/m) year. The findings indicate the importance of taking action to reduce DMF occupational exposure limits for promoting worker health.

Biointervention makes leather processing greener: an integrated cleansing and tanning system.

PubMed

Thanikaivelan, Palanisamy; Rao, Jonnalagadda Raghava; Nair, Balachandran Unni; Ramasami, Thirumalachari

2003-06-01

The do-undo methods adopted in conventional leather processing generate huge amounts of pollutants. In other words, conventional methods employed in leather processing subject the skin/hide to wide variations in pH. Pretanning and tanning processes alone contribute more than 90% of the total pollution from leather processing. Included in this is a great deal of solid wastes such as lime and chrome sludge. In the approach described here, the hair and flesh removal as well as fiber opening have been achieved using biocatalysts at pH 8.0 for cow hides. This was followed by a pickle-free chrome tanning, which does not require a basification step. Hence, this tanning technique involves primarily three steps, namely, dehairing, fiber opening, and tanning. It has been found that the extent of hair removal, opening up of fiber bundles, and penetration and distribution of chromium are comparable to that produced by traditional methods. This has been substantiated through scanning electron microscopic, stratigraphic chrome distribution analysis, and softness measurements. Performance of the leathers is shown to be on par with conventionally processed leathers through physical and hand evaluation. Importantly, softness of the leathers is numerically proven to be comparable with that of control. The process also demonstrates reduction in chemical oxygen demand load by 80%, total solids load by 85%, and chromium load by 80% as compared to the conventional process, thereby leading toward zero discharge. The input-output audit shows that the biocatalytic three-step tanning process employs a very low amount of chemicals, thereby reducing the discharge by 90% as compared to the conventional multistep processing. Furthermore, it is also demonstrated that the process is technoeconomically viable.

Mitochondrial DNA, restoring Beethovens music.

PubMed

Merheb, Maxime; Vaiedelich, Stéphane; Maniguet, Thiérry; Hänni, Catherine

2016-01-01

Great ancient composers have endured many obstacles and constraints which are very difficult to understand unless we perform the restoration process of ancient music. Species identification in leather used during manufacturing is the key step to start such a restoration process in order to produce a facsimile of a museum piano. Our study reveals the species identification in the leather covering the hammer head in a piano created by Erard in 1802. This is the last existing piano similar to the piano that Beethoven used with its leather preserved in its original state. The leather sample was not present in a homogeneous piece, yet combined with glue. Using a DNA extraction method that avoids PCR inhibitors; we discovered that sheep and cattle are the origin of the combination. To identify the species in the leather, we focused on the amounts of mitochondrial DNA in both leather and glue and results have led us to the conclusion that the leather used to cover the hammer head in this piano was made of cattle hide.

Occupational cancers in leather tanning industries: A short review

PubMed Central

Rastogi, S. K.; Kesavachandran, C.; Mahdi, Farzana; Pandey, Amit

2007-01-01

Work in leather tanning involves exposure to a wide range of chemicals. Some of these are carcinogens or suspected carcinogens. Increased risks for a number of cancers have been reported among the tannery workers. In the present review, a detailed account of lung cancer, testicular cancer, soft tissue sarcoma, pancreatic cancer, bladder cancer among tannery workers is mentioned. PMID:21957364

INDUSTRIAL WASTEWATER

EPA Science Inventory

This document contains: federal legislation, NRDC consent degree, regulations, the research program, and the different treatments used for petrochemistry, pesticides, inorganic chemicals, batteries, metal finishing, iron and steel, electric power, textiles and leather industries.

Market study for direct utilization of geothermal resources by selected sectors of economy

NASA Astrophysics Data System (ADS)

1980-08-01

A comprehensive analysis is presented of industrial markets potential for direct use of geothermal energy by a total of six industry sectors: food and kindred products; tobacco manufactures; textile mill products; lumber and wood products (except furniture); chemicals and allied products; and leather and leather products. Location determinants and potential for direct use of geothermal resources are presented. The data was gathered through interviews with 30 senior executives in the six sectors of economy selected for study. Probable locations of plants in geothermal resource areas and recommendations for geothermal resource marketing are presented.

Studies on the use of power ultrasound in leather dyeing.

PubMed

Sivakumar, Venkatasubramanian; Rao, Paruchuri Gangadhar

2003-03-01

Uses of power ultrasound for acceleration/performing the chemical as well as physical processes are gaining importance. In conventional leather processing, the diffusion of chemicals through the pores of the skin/hide is achieved by the mechanical agitation caused by the paddle or drumming action. In this work, the use of power ultrasound in the dyeing of leather has been studied with the aim to improve the exhaustion of dye for a given processing time, to reduce the dyeing time and to improve the quality of dyed leather. The effect of power ultrasound in the dyeing of full chrome cow crust leather in a stationary condition is compared with dyeing in the absence of ultrasound as a control experiment both in a stationary as well as conventional drumming condition. An ultrasonic cleaner (150 W and 33 kHz) was used for the experiments. Actual power dissipated into the system was calculated from the calorimetric measurement. Experiments were carried out with variation in type of dye, amount of dye offer, temperature and time. The results show that there is a significant improvement in the percentage exhaustion of dye due to the presence of ultrasound, when compared to dyeing in absence of ultrasound. Experiments on equilibrium dye uptake carried out with or without ultrasound suggest that ultrasound help to improve the kinetics of leather dyeing. The results indicate that leathers dyed in presence of ultrasound have higher colour values, better dye penetration and fastness properties compared to control leathers. The physical testing results show that strength properties of the dyed leathers are not affected due to the application of ultrasound under the given process conditions. Apparent diffusion coefficient during the initial stage of dyeing process, both in presence and in absence of ultrasound was calculated. The values show that ultrasound helps in improving the apparent diffusion coefficient more for the difficult dyeing conditions such as in the case of metal-complex dyes having bigger aggregate size compared to less difficult dyeing conditions.

Assessment of source-based nitrogen removal alternatives in leather tanning industry wastewater.

PubMed

Zengin, G; Olmez, T; Doğruel, S; Kabdaşli, I; Tünay, O

2002-01-01

Nitrogen is an important parameter of leather tanning wastewaters. Magnesium ammonium phosphate (MAP) precipitation is a chemical treatment alternative for ammonia removal. In this study, a detailed source-based wastewater characterisation of a bovine leather tannery was made and nitrogen speciation as well as other basic pollutant parameter values was evaluated. This evaluation has led to definition of alternatives for source-based MAP treatment. MAP precipitation experiments conducted on these alternatives have yielded over 90% ammonia removal at pH 9.5 and using stoichiometric doses. Among the alternatives tested liming-deliming and bating-washing was found to be the most advantageous providing 71% ammonia removal.

IMPACT OF LEATHER PROCESSING INDUSTRIES ON CHROMIUM CONCENTRATION IN GROUNDWATER SOUTH OF CHENNAI CITY, INDIA

NASA Astrophysics Data System (ADS)

Elango, L.; Brindha, K.; G. Rajesh, V.

2009-12-01

The groundwater quality is under threat due to disposal of effluents from a number of industries. Poor practice of treatment of wastes from tanning industries or leather processing industries lead to pollution of groundwater. This study was carried out with the objective of assessing the impact of tanneries on groundwater quality in Chromepet area which is a part of the metropolitan area of Chennai, Tamil Nadu, India. This area serves as the home town for a number of small and large scale tanning industries. People in certain parts of this area depend on the groundwater for their domestic needs as there is no piped drinking water supply system. Topographically this region is generally flat with gentle slope towards east and north east. The charnockite rocks occur as basement at the depth of about 15m from the surface of this area. Weathered charnockite rock occurs at the depth from 7m to 15m from the ground surface. The upper layer consists of loamy soil. Groundwater occurs in the unconfined condition at a depth from 0.5m to 5m. Thirty six groundwater samples were collected during March 2008 and the groundwater samples were analysed for their heavy metal (chromium) content using atomic absorption spectrophotometer. Bureau of Indian Standards (BIS) recommended the maximum permissible limit of chromium in drinking water as 0.05 mg/l. Considering this, it was found that 86% of the groundwater samples possessed concentration of chromium above the maximum permissible limit recommended by BIS. The tanneries use chrome sulphate to strengthen the leather and make it water repellent. The excess of chromium gets washed off and remains in the wastewater. This wastewater is disposed into open uncovered drains either untreated or after partial treatment. Thus the chromium leaches through the soil and reaches the groundwater table. Apart from this, there is also huge quantity of solid waste resulting from the hides and skins which are dumped off without suitable treatment. The percolation of the leachate rich in chromium will also add to chromium concentration in groundwater. The effluents from the tanning processes are sent to the common effluent treatment plant (CETP) by large scale industries. But small scale industries are not able to use such CETP for treating the wastewater generated by them. It is prominent from this study that the effluent from the tanning industries should be treated properly before disposing off into drains in order to prevent the pollution of groundwater. Reverse osmosis treatment of tanning effluent can be adopted for separation and recovery of chromium from the wastewater. For improving the already contaminated groundwater of this region, insitu bioremediation by the use of microorganisms isolated from the contaminated site will prove effective.

East Europe Report, Economic and Industrial Affairs, No. 2409

DTIC Science & Technology

1983-06-09

technologically unsophisticated or because they do not correspond to the necessity for locating facilities rationally in terms of the natural and...Geological explorations and drilling in search of ore and nonmetalliferous min- eral deposits, cooperation in technology , extraction and processing...agreed to lend support and to encourage cooperation in the production of and trade in ready-to-wear clothing, knitwear , shoes, leather goods etc. 5

Research on Design Information Management System for Leather Goods

NASA Astrophysics Data System (ADS)

Lu, Lei; Peng, Wen-li

The idea of setting up a design information management system of leather goods was put forward to solve the problems existed in current information management of leather goods. Working principles of the design information management system for leather goods were analyzed in detail. Firstly, the acquiring approach of design information of leather goods was introduced. Secondly, the processing methods of design information were introduced. Thirdly, the management of design information in database was studied. Finally, the application of the system was discussed by taking the shoes products as an example.

Preparation and characterization of hierarchical porous carbons derived from solid leather waste for supercapacitor applications.

PubMed

Konikkara, Niketha; Kennedy, L John; Vijaya, J Judith

2016-11-15

Utilization of crust leather waste (CLW) as precursors for the preparation of hierarchical porous carbons (HPC) were investigated. HPCs were prepared from CLW by pre-carbonization followed by chemical activation using KOH at relatively high temperatures. Textural properties of HPC's showed an extent of micro-and mesoporosity with maximum BET surface area of 716m(2)/g. Inducements of graphitic planes in leather waste derived carbons were observed from X-ray diffraction and HR-TEM analysis. Microstructure, thermal behavior and surface functional groups were identified using FT-Raman, thermo gravimetric analysis and FT-IR techniques. HPCs were evaluated for electrochemical properties by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) and electrochemical impedance spectroscopy (EIS) by three electrode system. CLC9 sample showed a maximum capacitance of 1960F/g in 1M KCl electrolyte. Results achieved from rectangular curves of CV, GCD symmetric curves and Nyquist plots show that the leather waste carbon is suitable to fabricate supercapacitors as it possess high specific capacitance and electrochemical cycle stability. The present study proposes an effective method for solid waste management in leather industry by the way of converting toxic leather waste to new graphitic porous carbonaceous materials as a potential candidate for energy storage devices. Copyright © 2016 Elsevier B.V. All rights reserved.

High-speed scanning: an improved algorithm

NASA Astrophysics Data System (ADS)

Nachimuthu, A.; Hoang, Khoi

1995-10-01

In using machine vision for assessing an object's surface quality, many images are required to be processed in order to separate the good areas from the defective ones. Examples can be found in the leather hide grading process; in the inspection of garments/canvas on the production line; in the nesting of irregular shapes into a given surface... . The most common method of subtracting the total area from the sum of defective areas does not give an acceptable indication of how much of the `good' area can be used, particularly if the findings are to be used for the nesting of irregular shapes. This paper presents an image scanning technique which enables the estimation of useable areas within an inspected surface in terms of the user's definition, not the supplier's claims. That is, how much useable area the user can use, not the total good area as the supplier estimated. An important application of the developed technique is in the leather industry where the tanner (the supplier) and the footwear manufacturer (the user) are constantly locked in argument due to disputed quality standards of finished leather hide, which disrupts production schedules and wasted costs in re-grading, re- sorting... . The developed basic algorithm for area scanning of a digital image will be presented. The implementation of an improved scanning algorithm will be discussed in detail. The improved features include Boolean OR operations and many other innovative functions which aim at optimizing the scanning process in terms of computing time and the accurate estimation of useable areas.

Minimization of the environmental impact of chrome tanning: a new process with high chrome exhaustion.

PubMed

Morera, Josep M; Bacardit, Anna; Ollé, Lluís; Bartolí, Esther; Borràs, Maria D

2007-11-01

In all tanning technology operations wastes are generated. These reach the environment as residual waters, solid and liquid waste as well as atmospheric emissions and odours. This study tests an alternative method to the traditional tanning method at an industrial level. The new method is based on tanning without float and by significantly increasing the temperature at the end of the tanning process. The properties of the leathers obtained using the two methods have been compared and the results indicate that those leathers have similar physical, chemical, and organoleptic properties. However, the differences existing from the environmental point of view are significant. It is not necessary to use clean water for this tanning. Moreover, there is a 75% reduction of the residual float, a 91% reduction of the chrome discharged, and a 94% reduction of the chlorides discharged. A financial assessment was carried out to demonstrate that the newly proposed system is 32% more economic than the traditional one.

Leather Coated with Mixtures of Humectant and Antioxidants to Improve UV and Heat Resistance

USDA-ARS?s Scientific Manuscript database

Ultraviolet (UV) and heat resistance are very important qualities for leather products. We recently developed an environmentally friendly finishing process for improving the UV- and heat resistance of automobile upholstery leather. We previously reported and demonstrated some promising results fro...

Poultry feed based on protein hydrolysate derived from chrome-tanned leather solid waste: creating value from waste.

PubMed

Chaudhary, Rubina; Pati, Anupama

2016-04-01

Leather industry generates huge amount of chrome-containing leather solid waste which creates major environment problems to tanners worldwide. Chrome-tanned leather solid waste is primarily chromium complex of collagen protein. The presence of chromium limits its protein application in animal feed industry. The purified protein hydrolysate with zero chromium could be used in poultry feed. In this study, an attempt has been made to assess performance of poultry with purified protein hydrolysate as a feed derived from chrome-tanned leather waste as partial replacement of soyabean meal as a sole source of protein for growing broiler chickens. Growth study was conducted to evaluate the effect of feeding protein hydrolysate on performance and physiochemical characteristics of meat of broiler chickens. Two experimental diets containing various levels of protein hydrolysate (EI-20 % and EII-30 %) were evaluated. The comparative study was performed as control with soyabean meal. Daily feed intake, body weight gain and feed conversion ratio were measured from day 8 to day 35. At the end of the study, birds were randomly selected and slaughtered to evaluate for physiochemical characteristics of meat. Diet had significant effects on feed intake and body weight gain. Birds fed with 20 and 30 % protein hydrolysate consumed 9.5 and 17.5 % higher amount of feed and gained 6.5 and 16.6 % higher than soyabean meal-fed birds. The current study produced evidence that protein hydrolysate can replace up to 75 % of soyabean meal in broiler diets without affecting either growth performance or meat characteristics.

Decorin content and near infrared spectroscopy analysis of dried collagenous biomaterial samples.

PubMed

Aldema-Ramos, Mila L; Castell, Joan Carles; Muir, Zerlina E; Adzet, Jose Maria; Sabe, Rosa; Schreyer, Suzanne

2012-12-14

The efficient removal of proteoglycans, such as decorin, from the hide when processing it to leather by traditional means is generally acceptable and beneficial for leather quality, especially for softness and flexibility. A patented waterless or acetone dehydration method that can generate a product similar to leather called Dried Collagenous Biomaterial (known as BCD) was developed but has no effect on decorin removal efficiency. The Alcian Blue colorimetric technique was used to assay the sulfated glycosaminoglycan (sGAG) portion of decorin. The corresponding residual decorin content was correlated to the mechanical properties of the BCD samples and was comparable to the control leather made traditionally. The waterless dehydration and instantaneous chrome tanning process is a good eco-friendly alternative to transforming hides to leather because no additional effects were observed after examination using NIR spectroscopy and additional chemometric analysis.

Sono-leather technology with ultrasound: a boon for unit operations in leather processing - review of our research work at Central Leather Research Institute (CLRI), India.

PubMed

Sivakumar, Venkatasubramanian; Swaminathan, Gopalaraman; Rao, Paruchuri Gangadhar; Ramasami, Thirumalachari

2009-01-01

Ultrasound is a sound wave with a frequency above the human audible range of 16 Hz to 16 kHz. In recent years, numerous unit operations involving physical as well as chemical processes are reported to have been enhanced by ultrasonic irradiation. There have been benefits such as improvement in process efficiency, process time reduction, performing the processes under milder conditions and avoiding the use of some toxic chemicals to achieve cleaner processing. These could be a better way of augmentation for the processes as an advanced technique. The important point here is that ultrasonic irradiation is physical method activation rather than using chemical entities. Detailed studies have been made in the unit operations related to leather such as diffusion rate enhancement through porous leather matrix, cleaning, degreasing, tanning, dyeing, fatliquoring, oil-water emulsification process and solid-liquid tannin extraction from vegetable tanning materials as well as in precipitation reaction in wastewater treatment. The fundamental mechanism involved in these processes is ultrasonic cavitation in liquid media. In addition to this there also exist some process specific mechanisms for the enhancement of the processes. For instance, possible real-time reversible pore-size changes during ultrasound propagation through skin/leather matrix could be a reason for diffusion rate enhancement in leather processing as reported for the first time. Exhaustive scientific research work has been carried out in this area by our group working in Chemical Engineering Division of CLRI and most of these benefits have been proven with publications in valued peer-reviewed international journals. The overall results indicate that about 2-5-fold increase in the process efficiency due to ultrasound under the given process conditions for various unit operations with additional benefits. Scale-up studies are underway for converting these concepts in to a real viable larger scale operation. In the present paper, summary of our research findings from employing this technique in various unit operations such as cleaning, diffusion, emulsification, particle-size reduction, solid-liquid leaching (tannin and natural dye extraction) as well as precipitation has been presented.

Pyrolysis of chromium rich tanning industrial wastes and utilization of carbonized wastes in metallurgical process.

PubMed

Tôrres Filho, Artur; Lange, Liséte Celina; de Melo, Gilberto Caldeira Bandeira; Praes, Gustavo Eduardo

2016-02-01

Pyrolysis is the thermal degradation of organic material in oxygen-free or very lean oxygen atmosphere. This study evaluates the use of pyrolysis for conversion of leather wastes from chromium tanning processes into Carbonized Leather Residues (CLR), and the utilization of CLR in metallurgical processes through the production of iron ore pellets. CLR was used to replace mineral coal in proportions of 10% and 25% on fixed carbon basis content in the mixtures for pellets preparation. Experimental conversions were performed on a pilot scale pyrolysis plant and a pelletizing reactor of the "pot grate" type. The results demonstrated the technical feasibility of using the charcoal product from animal origin as an energy source, with recovery of up to 76.47% of chromium contained in CLR in the final produced of iron ore pellets. Pellets with 25% replacement of fixed carbon in the coal showed an enhanced compressive strength, with an average value of 344kgfpellet(-1), compared to 300kgfpellet(-1) for standard produced pellets. Copyright © 2015. Published by Elsevier Ltd.

Thermal and enzymatic recovering of proteins from untanned leather waste.

PubMed

Bajza, Z; Vrucek, V

2001-01-01

The laboratory trials of a process to treat untanned leather waste to isolate valuable protein products are presented. In this comparative study, both thermal and enzymatic treatments of leather waste were performed. The enzymatic method utilizes commercially available alkaline protease at moderate temperatures and for short periods of time. The concentration of the enzyme was 500 units per gram of leather waste which makes the method cost-effective. Amino acid composition in the hydrolysate obtained by the enzyme hydrolysis of untanned leather waste is determined. Chemical and physical properties of protein powder products from untanned leather waste were evaluated by spectrophotometric and chromatographic methods and by use of electron microscope. The results of microbiological assays confirm that these products agree to food safety standards. This relatively simple treatment of untanned leather waste may provide a practical and economical solution to the disposal of potentially dangerous waste.

Long-Run Impact of the Thirty Cent Revision in Ontario's Minimum Wage on Five Industries.

ERIC Educational Resources Information Center

McKenna, Ian B.

To determine the effect of a legislated increase in the minimum wage in Ontario, 219 establishments in five industries were surveyed. The industries were shoe factories; luggage, handbag, and small leather goods manufacturers; hosiery mills, children's clothing industry; and the foundation garment industry. Data were gathered at three different…

Ultrafast pulse lasers jump to macro applications

NASA Astrophysics Data System (ADS)

Griebel, Martin; Lutze, Walter; Scheller, Torsten

2016-03-01

Ultrafast Lasers have been proven for several micro applications, e.g. stent cutting, for many years. Within its development of applications Jenoptik has started to use ultrafast lasers in macro applications in the automotive industry. The JenLas D2.fs-lasers with power output control via AOM is an ideal tool for closed loop controlled material processing. Jenoptik enhanced his well established sensor controlled laser weakening process for airbag covers to a new level. The patented process enables new materials using this kind of technology. One of the most sensitive cover materials is genuine leather. As a natural product it is extremely inhomogeneous and sensitive for any type of thermal load. The combination of femtosecond pulse ablation and closed loop control by multiple sensor array opens the door to a new quality level of defined weakening. Due to the fact, that the beam is directed by scanning equipment the process can be split in multiple cycles additionally reducing the local energy input. The development used the 5W model as well as the latest 10W release of JenLas D2.fs and achieved amazing processing speeds which directly fulfilled the requirements of the automotive industry. Having in mind that the average cycle time of automotive processes is about 60s, trials had been done of processing weakening lines in genuine leather of 1.2mm thickness. Parameters had been about 15 cycles with 300mm/s respectively resulting in an average speed of 20mm/s and a cycle time even below 60s. First samples had already given into functional and aging tests and passed successfully.

Decorin Content and Near Infrared Spectroscopy Analysis of Dried Collagenous Biomaterial Samples

PubMed Central

Aldema-Ramos, Mila L.; Castell, Joan Carles; Muir, Zerlina E.; Adzet, Jose Maria; Sabe, Rosa; Schreyer, Suzanne

2012-01-01

The efficient removal of proteoglycans, such as decorin, from the hide when processing it to leather by traditional means is generally acceptable and beneficial for leather quality, especially for softness and flexibility. A patented waterless or acetone dehydration method that can generate a product similar to leather called Dried Collagenous Biomaterial (known as BCD) was developed but has no effect on decorin removal efficiency. The Alcian Blue colorimetric technique was used to assay the sulfated glycosaminoglycan (sGAG) portion of decorin. The corresponding residual decorin content was correlated to the mechanical properties of the BCD samples and was comparable to the control leather made traditionally. The waterless dehydration and instantaneous chrome tanning process is a good eco-friendly alternative to transforming hides to leather because no additional effects were observed after examination using NIR spectroscopy and additional chemometric analysis. PMID:24970152

Microbial Enzymes: Tools for Biotechnological Processes

PubMed Central

Adrio, Jose L.; Demain, Arnold L.

2014-01-01

Microbial enzymes are of great importance in the development of industrial bioprocesses. Current applications are focused on many different markets including pulp and paper, leather, detergents and textiles, pharmaceuticals, chemical, food and beverages, biofuels, animal feed and personal care, among others. Today there is a need for new, improved or/and more versatile enzymes in order to develop more novel, sustainable and economically competitive production processes. Microbial diversity and modern molecular techniques, such as metagenomics and genomics, are being used to discover new microbial enzymes whose catalytic properties can be improved/modified by different strategies based on rational, semi-rational and random directed evolution. Most industrial enzymes are recombinant forms produced in bacteria and fungi. PMID:24970208

Ultrasound assisted enhancement in natural dye extraction from beetroot for industrial applications and natural dyeing of leather.

PubMed

Sivakumar, Venkatasubramanian; Anna, J Lakshmi; Vijayeeswarri, J; Swaminathan, G

2009-08-01

There is a growing demand for eco-friendly/non-toxic colorants, specifically for health sensitive applications such as coloration of food and dyeing of child textile/leather garments. Recently, dyes derived from natural sources for these applications have emerged as an important alternative to potentially harmful synthetic dyes and pose need for suitable effective extraction methodologies. The present paper focus on the influence of process parameters for ultrasound assisted leaching of coloring matter from plant materials. In the present work, extraction of natural dye from beetroot using ultrasound has been studied and compared with static/magnetic stirring as a control process at 45 degrees C. The influence of process parameters on the extraction efficiency such as ultrasonic output power, time, pulse mode, effect of solvent system and amount of beetroot has been studied. The use of ultrasound is found to have significant improvement in the extraction efficiency of colorant obtained from beetroot. Based on the experiments it has been found that a mixture of 1:1 ethanol-water with 80W ultrasonic power for 3h contact time provided better yield and extraction efficiency. Pulse mode operation may be useful in reducing electrical energy consumption in the extraction process. The effect of the amount of beetroot used in relation to extraction efficiency has also been studied. Two-stage extraction has been studied and found to be beneficial for improving the yield for higher amounts of beetroot. Significant 8% enhancement in % yield of colorant has been achieved with ultrasound, 80W as compared to MS process both using 1:1 ethanol-water. The coloring ability of extracted beet dye has been tested on substrates such as leather and paper and found to be suitable for dyeing. Ultrasound is also found to be beneficial in natural dyeing of leather with improved rate of exhaustion. Both the dyed substrates have better color values for ultrasonic beet extract as inferred from reflectance measurement. Therefore, the present study clearly offers efficient extraction methodology from natural dye resources such as beetroot with ultrasound even dispensing with external heating. Thereby, also making eco-friendly non-toxic dyeing of fibrous substances a potential viable option.

New approach of depollution of solid chromium leather waste by the use of organic chelates: economical and environmental impacts.

PubMed

Malek, Ammar; Hachemi, Messaoud; Didier, Villemin

2009-10-15

Herein, we describe an original novel method which allows the decontamination of the chromium-containing leather wastes to simplify the recovery of its considerable protein fractions. Organic salts and acids such as potassium oxalate, potassium tartrate, acetic and citric acids were tested for their efficiency to separate the chromium from the leather waste. Our investigation is based on the research of the total reversibility of the tanning process, in order to decontaminate the waste without its previous degradation or digestion. The effect of several influential parameters on the treatment process was also studied. Therefore, the action of chemical agents used in decontamination process seems very interesting. The optimal yield of chromium extraction about 95% is obtained. The aim of the present study is to define a preliminary processing of solid leather waste with two main impacts: Removing with reusing chromium in the tanning process with simple, ecological and economic treatment process and potential valorization of the organic matrix of waste decontaminated.

Production of ethoxylated fatty acids derived from Jatropha non-edible oil as a nonionic fat-liquoring agent.

PubMed

El-Shattory, Y; Abo-Elwafa, Ghada A; Aly, Saadia M; Nashy, El-Shahat H A

2012-01-01

Natural fatty derivatives (oleochemicals) have been used as intermediate materials in several industries replacing the harmful and expensive petrochemicals. Fatty ethoxylates are one of these natural fatty derivatives. In the present work Jatropha fatty acids were derived from the non edible Jatropha oil and used as the fat source precursor. The ethoxylation process was carried out on the derived fatty acids using a conventional cheap catalyst (K₂CO₃) in order to obtain economically and naturally valuable non-ionic surfactants. Ethoxylation reaction was proceeded using ethylene oxide gas in the presence of 1 or 2% K₂CO₃ catalyst at 120 and 145°C for 5, 8 and 12 hours. The prepared products were evaluated for their chemical and physical properties as well as its application as non- ionic fat-liquoring agents in leather industry. The obtained results showed that the number of ethylene oxide groups introduced in the fatty acids as well as their EO% increased as the temperature and time of the reaction increased. The highest ethoxylation number was obtained at 145°C for 8 hr. Also, the prepared ethoxylated products were found to be effective fat-liquors with high HLB values giving stable oil in water emulsions. The fat-liquored leather led to an improvement in its mechanical properties such as tensile strength and elongation at break. In addition, a significant enhancement in the texture of the treated leather by the prepared fat-liquors as indicated from the scanning electron microscope (SEM) images was observed.

Deindustrialization and the Shift to Services.

ERIC Educational Resources Information Center

Kutscher, Ronald E.; Personick, Valerie A.

1986-01-01

Bureau of Labor Statistics data show the industrial sector as a whole in healthy shape, but a few manufacturing industries in deep trouble. These industries include tobacco manufacturers, iron and steel foundries, leather products, and steel manufacturers. Also examines shifts in employment and output, job quality, and outlook for the future. (CT)

Total control of chromium in tanneries - thermal decomposition of filtration cake from enzymatic hydrolysis of chrome shavings.

PubMed

Kocurek, P; Kolomazník, K; Bařinová, M; Hendrych, J

2017-04-01

This paper deals with the problem of chromium recovery from chrome-tanned waste and thus with reducing the environmental impact of the leather industry. Chrome-tanned waste was transformed by alkaline enzymatic hydrolysis promoted by magnesium oxide into practically chromium-free, commercially applicable collagen hydrolysate and filtration cake containing a high portion of chromium. The crude and magnesium-deprived chromium cakes were subjected to a process of thermal decomposition at 650°C under oxygen-free conditions to reduce the amount of this waste and to study the effect of magnesium removal on the resulting products. Oxygen-free conditions were applied in order to prevent the oxidation of trivalent chromium into the hazardous hexavalent form. Thermal decomposition products from both crude and magnesium-deprived chrome cakes were characterized by high chromium content over 50%, which occurred as eskolaite (Cr 2 O 3 ) and magnesiochromite (MgCr 2 O 4 ) crystal phases, respectively. Thermal decomposition decreased the amount of chrome cake dry feed by 90%. Based on the performed experiments, a scheme for the total control of chromium in the leather industry was designed.

Patulin in apple leather in Iran.

PubMed

Montaseri, H; Eskandari, M H; Yeganeh, A T; Karami, S; Javidnia, K; Dehghanzadeh, G R; Mesbahi, G R; Niakousari, M

2014-01-01

Apple leather is made by dehydration of cooked fruit into leathery sheets. Mould growth and patulin production can occur in damaged apples or when fallen fruit is collected for apple leather processing. A survey was conducted to determine levels and dietary intake of patulin from apple leather marketed in Iran. Patulin was detected in all samples at concentrations ranging from <10 to 2559 µg/kg. Mean patulin concentration was 620 µg/kg and 91.4% of the samples had levels higher than 50 µg/kg. Estimated daily intake (EDI) of patulin for adults and children considering the mean concentration of patulin obtained in this study (620 µg/kg) were higher than the provisional maximum tolerable daily intake (PMTDI) of 0.4 µg/kg bw/day for patulin that has been established by the Joint FAO/WHO Expert Committee on Food Additives. This indicated the need for stricter control and improvement in processing techniques to reduce the incidence of patulin in apple leather.

Nanocrystalline semiconductor doped rare earth oxide for the photocatalytic degradation studies on Acid Blue 113: A di-azo compound under UV slurry photoreactor.

PubMed

Suganya Josephine, G A; Mary Nisha, U; Meenakshi, G; Sivasamy, A

2015-11-01

Preventive measures for the control of environmental pollution and its remediation has received much interest in recent years due to the world-wide increase in the contamination of water bodies. Contributions of these harmful effluents are caused by the leather processing, pharmaceutical, cosmetic, textile, agricultural and other chemical industries. Nowadays, advanced oxidation processes considered to be better option for the complete destruction of organic contaminants in water and wastewater. Acid Blue 113 is a most widely used di-azo compound in leather, textile, dying and food industry as a color rending compound. In the present study, we have reported the photo catalytic degradation of Acid Blue 113 using a nanocrystalline semiconductor doped rare earth oxide as a photo catalyst under UV light irradiation. The photocatalyst was prepared by a simple precipitation technique and were characterized by XRD, FT-IR, UV-DRS and FE-SEM analysis. The experimental results proved that the prepared photo catalyst was nanocrystalline and highly active in the UV region. The UV-DRS results showed the band gap energy was 3.15eV for the prepared photo catalyst. The photodegradation efficiency was analyzed by various experimental parameters such as pH, catalyst dosage, variation of substrate concentration and effect of electrolyte addition. The photo degradation process followed a pseudo first order kinetics and was continuously monitored by UV-visible spectrophotometer. The experimental results proved the efficacy of the nanocrystalline zinc oxide doped dysprosium oxide which are highly active under UV light irradiations. It is also suggested that the prepared material would find wider applications in environmental remediation technologies to remove the carcinogenic and toxic moieties present in the industrial effluents. Copyright © 2015 Elsevier Inc. All rights reserved.

OCCUPATION/INDUSTRY AND RISK OF NON HODGKIN LYMPHOMA IN THE UNITED STATES

PubMed Central

Schenk, Maryjean; Purdue, Mark P.; Colt, Joanne S.; Hartge, Patricia; Blair, Aaron; Stewart, Patricia; Cerhan, James R.; De Roos, Anneclaire J.; Cozen, Wendy; Severson, Richard K.

2011-01-01

Aims To identify occupations and industries associated with non-Hodgkin lymphoma in a large population-based case-control study in the United States. Methods Cases (n = 1,189) of histologically confirmed malignant NHL ages 20–74 were prospectively identified in four geographic areas covered by the National Cancer Institute SEER Program. Controls (n = 982) were selected from the general population by random digit dialing (< 65 years of age) and from residents listed in Medicare files (65–74 years of age). Odds ratios and 95% confidence intervals for occupations and industries were calculated by unconditional logistic regression analyses, adjusting for age, gender, ethnicity, and study center. Further analyses stratified for gender and histological subtype were also performed. Results Risk of NHL was increased for a few occupations and industries. Several white collar occupations, with no obvious hazardous exposures, had elevated risks, including purchasing agents and buyers, religious workers, physical therapists, and information clerks. Occupations with excesses that may have exposures of interest include launderers and ironers, service occupations, food/beverage preparation supervisors, hand packers and packagers, roofing and siding, leather and leather products, transportation by air, nursing and personal care facilities, and specialty outpatient clinics. Significantly decreased risks of NHL were found for a number of occupations and industries including post secondary teachers and chemical and allied products. Conclusions The results of this study suggest that several occupations and industries may alter the risk of NHL. Our results support previously reported increased risks among farmers, printers, medical professionals, electronic workers, and leather workers. These findings should be evaluated further in larger studies that have the power to focus on specific exposures and histologic subtypes of NHL. PMID:18805886

40 CFR 425.01 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY General Provisions § 425.01 Applicability. This part applies to any leather tanning and finishing facility which discharges or may discharge process wastewater...

[Work and mental health: risk groups].

PubMed

Vézina, M; Gingras, S

1996-01-01

Analysis of the Quebec Health survey identified those Quebec industrial sectors and professions in which workers are at risk of higher psychological distress and lower psychological well-being. Risk levels were measured by odds ratio, controlling for: health status, sex, social support and stressful life events. Results show that those at risk are blue collar workers and less qualified workers of traditional sectors. Lower job latitude could explain those results. Results show that risk of mental health problems is significantly higher in the following industrial sectors: leather, chemicals, paint and varnish industries; urban bus transport and taxi; shoe, clothing and textile retail stores; department stores; restaurant services; insurance and public administration (excluding defence). Risk of mental health problems is higher in the following professions road transport (excluding truck drivers); textile, leather, fur manufacturing and repairing; housekeeping and maintenance; painters, tapestry-workers, insulation and waterproofing, food and beverages sector; data processors; editors and university professors.

Dose-mortality assessment upon reuse and recycling of industrial sludge.

PubMed

Lin, Kae-Long; Chen, Bor-Yann

2007-09-05

This study provides a novel attempt to put forward, in general toxicological terms, quantitative ranking of toxicity of various sources of sludge for possible reusability in further applications. The high leaching concentrations of copper in printed circuit board (PCB) sludge and chromium in leather sludge apparently exceeded current Taiwan's EPA regulatory thresholds and should be classified as hazardous wastes. Dose-mortality analysis indicated that the toxicity ranking of different sources of sludge was PCB sludge>CaF(2) sludge>leather sludge. PCB sludge was also confirmed as a hazardous waste since the toxicity potency of PCB sludge was nearly identical to CdCl(2). However, leather sludge seemed to be much less toxic than as anticipated, perhaps due to a significant decrease of toxic species bioavailable in the aqueous phase to the reporter bacterium Escherichia coli DH5alpha. For possible reusability of sludge, maximum concentrations allowable to be considered "safe" (ca. EC(100)/100) were 9.68, 42.1 and 176 mgL(-1) for CaF(2) sludge, PCB sludge and leather sludge, respectively.

Perfluoroalkyl acids in surface waters and tapwater in the Qiantang River watershed-Influences from paper, textile, and leather industries.

PubMed

Lu, Guo-Hui; Gai, Nan; Zhang, Peng; Piao, Hai-Tao; Chen, Shu; Wang, Xiao-Chun; Jiao, Xing-Chun; Yin, Xiao-Cai; Tan, Ke-Yan; Yang, Yong-Liang

2017-10-01

Perfluoroalkyl acids (PFAAs) are widely used as multi-purpose surfactants or water/oil repellents. In order to understand the contamination level and compositional profiles of PFAAs in aqueous environment in textile, leather, and paper making industrial areas, surface waters and tap waters were collected along the watershed of the Qiantang River where China's largest textile, leather, and paper making industrial bases are located. For comparison, surface water and tapwater samples were also collected in Hangzhou and its adjacent areas. 17 PFAAs were analyzed by solid phase extraction-high performance liquid chromatography-tandem mass spectrometry. The results show that the total concentrations of PFAAs (ΣPFAAs) in the Qiantang River waters ranged from 106.1 to 322.9 ng/L, averaging 164.2 ng/L. The contamination levels have been found to be extremely high, comparable to the levels of the most serious PFAA contamination in surface waters of China. The PFAA composition profiles were characterized by the dominant PFOA (average 58.1% of the total PFAAs), and PFHxA (average 18.8%). The ΣPFAAs in tap water ranged from 9.5 to 174.8 ng/L, showing PFAA compositional pattern similar to the surface waters. Good correlations between PFAA composition profiles in tap waters and the surface waters were observed. Copyright © 2017 Elsevier Ltd. All rights reserved.

40 CFR 425.90 - Applicability; description of the retan-wet finish-splits subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE... resulting from any tannery which processes previously unhaired and tanned splits into finished leather by...

Click chemistry approach to conventional vegetable tanning process: accelerated method with improved organoleptic properties.

PubMed

Krishnamoorthy, Ganesan; Ramamurthy, Govindaswamy; Sadulla, Sayeed; Sastry, Thotapalli Parvathaleswara; Mandal, Asit Baran

2014-09-01

Click chemistry approaches are tailored to generate molecular building blocks quickly and reliably by joining small units together selectively and covalently, stably and irreversibly. The vegetable tannins such as hydrolyzable and condensed tannins are capable to produce rather stable radicals or inhibit the progress of radicals and are prone to oxidations such as photo and auto-oxidation, and their anti-oxidant nature is well known. A lot remains to be done to understand the extent of the variation of leather stability, color variation (lightening and darkening reaction of leather), and poor resistance to water uptake for prolonged periods. In the present study, we have reported click chemistry approaches to accelerated vegetable tanning processes based on periodates catalyzed formation of oxidized hydrolysable and condensed tannins for high exhaustion with improved properties. The distribution of oxidized vegetable tannin, the thermal stability such as shrinkage temperature (T s) and denaturation temperature (T d), resistance to collagenolytic activities, and organoleptic properties of tanned leather as well as the evaluations of eco-friendly characteristics were investigated. Scanning electron microscopic analysis indicates the cross section of tightness of the leather. Differential scanning calorimetric analysis shows that the T d of leather is more than that of vegetable tanned or equal to aldehyde tanned one. The leathers exhibited fullness, softness, good color, and general appearance when compared to non-oxidized vegetable tannin. The developed process benefits from significant reduction in total solids and better biodegradability in the effluent, compared to non-oxidized vegetable tannins.

Power ultrasound-assisted cleaner leather dyeing technique: influence of process parameters.

PubMed

Sivakumar, Venkatasubramanian; Rao, Paruchuri Gangadhar

2004-03-01

The application of power ultrasound to leather processing has a significant role in the concept of "clean technology" for leather production. The effect of power ultrasound in leather dyeing has been compared with dyeing in the absence of ultrasound and conventional drumming. The power ultrasound source used in these experiments was ultrasonic cleaner (150 W and 33 kHz). The effect of various process parameters such as amount of dye offer, temperature, and type of dye has been experimentally found out. The effect of presonication of dye solution as well as leather has been studied. Experiments at ultrasonic bath temperature were carried out to find out the combined thermal as well as stirring effects of ultrasound. Dyeing in the presence of ultrasound affords about 37.5 (1.8 times) difference as increase in % dye exhaustion or about 50% decrease in the time required for dyeing compared to dyeing in the absence of ultrasound for 4% acid red dye. About 29 (1.55 times) increase in % dye exhaustion or 30% reduction in time required for dyeing was observed using ultrasound at stationary condition compared with conventional dynamic drumming conditions. The effect of ultrasound at constant temperature conditions with a control experiment has also been studied. The dye exhaustion increases as the temperature increases (30-60 degrees C) and better results are observed at higher temperature due to the use of ultrasound. Presonication of dye solution or crust leather prior to the dyeing process has no significant improvement in dye exhaustion, suggesting ultrasound effect is realized when it is applied during the dyeing process. The results indicate that 1697 and 1416 ppm of dye can be reduced in the spent liquor due to the use of ultrasound for acid red (for 100 min) and acid black (for 3 h) dyes, respectively, thereby reducing the pollution load in the effluent stream. The color yield of the leather as inferred from the reflectance measurement indicates that dye offer can be halved when ultrasound is employed to promote dyeing. Scanning electron microscopy analysis of the cross section of the dyed leather indicates that fiber structure is not affected due to the use of ultrasound under the given process conditions. The present study clearly demonstrates that ultrasound can be used as a tool to improve the rate of exhaustion of dye, reduce pollution load in the spent effluent liquor, and improve the quality of leather produced. The study also offered provision to employ optimum levels of chemicals and increases percentage exhaustion for a given time, thereby limiting the pollution load in the tannery effluent, which is of great social concern.

Chromium-Makes stainless steel stainless

USGS Publications Warehouse

Kropschot, S.J.; Doebrich, Jeff

2010-01-01

Chromium, a steely-gray, lustrous, hard metal that takes a high polish and has a high melting point, is a silvery white, hard, and bright metal plating on steel and other material. Commonly known as chrome, it is one of the most important and indispensable industrial metals because of its hardness and resistance to corrosion. But it is used for more than the production of stainless steel and nonferrous alloys; it is also used to create pigments and chemicals used to process leather.

40 CFR Appendix A to Part 122 - NPDES Primary Industry Categories

Code of Federal Regulations, 2010 CFR

2010-07-01

... Foundries Gum and wood chemicals Inorganic chemicals manufacturing Iron and steel manufacturing Leather tanning and finishing Mechanical products manufacturing Nonferrous metals manufacturing Ore mining Organic...

Mathematical model of the metal mould surface temperature optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mlynek, Jaroslav, E-mail: jaroslav.mlynek@tul.cz; Knobloch, Roman, E-mail: roman.knobloch@tul.cz; Srb, Radek, E-mail: radek.srb@tul.cz

2015-11-30

The article is focused on the problem of generating a uniform temperature field on the inner surface of shell metal moulds. Such moulds are used e.g. in the automotive industry for artificial leather production. To produce artificial leather with uniform surface structure and colour shade the temperature on the inner surface of the mould has to be as homogeneous as possible. The heating of the mould is realized by infrared heaters located above the outer mould surface. The conceived mathematical model allows us to optimize the locations of infrared heaters over the mould, so that approximately uniform heat radiation intensitymore » is generated. A version of differential evolution algorithm programmed in Matlab development environment was created by the authors for the optimization process. For temperate calculations software system ANSYS was used. A practical example of optimization of heaters locations and calculation of the temperature of the mould is included at the end of the article.« less

In vitro micronuclei tests to evaluate the genotoxicity of surface water under the influence of tanneries.

PubMed

Lemos, A O; Oliveira, N C D; Lemos, C T

2011-06-01

Leather manufacturing has a high potential for environmental pollution due to hides and chemicals that are not completely absorbed during the tanning process. This study aims to investigate the mutagenic potential of surface water samples from Cadeia and Feitoria rivers (RS, Brazil) in areas influenced by tanneries and leather footwear industry. Micronucleus assays using V79 cells and human lymphocytes were used. Cells were exposed to surface water collected bimonthly from three sites for a year, totaling six samples. Significant MN induction in human lymphocytes was shown by 83% of samples from sites FEI001 and CAD001 located downstream from the industrial area, followed by FEI004 (33%), upstream. Only a single sample from site FEI004 showed a positive response for MN in V79 cells. Thirteen discordant and five concordant responses were found between the two in vitro tests. Mutagenic agents were found at the sites where chemical quality was worst, corroborating studies on chronic toxicity, oxidative stress and mutagenicity performed in this area. The assay using human lymphocytes was more sensitive than V79 cells to detect the contaminants from this area, showing that it is an excellent biomarker of environmental genotoxicity. Copyright © 2011 Elsevier Ltd. All rights reserved.

Molecular cloning, sequence and structural analysis of dehairing Mn(2+) dependent alkaline serine protease (MASPT) of Bacillus pumilus TMS55.

PubMed

Ibrahim, Kalibulla Syed; Muniyandi, Jeyaraj; Pandian, Shunmugiah Karutha

2011-10-01

Leather industries release a large amount of pollution-causing chemicals which creates one of the major industrial pollutions. The development of enzyme based processes as a potent alternative to pollution-causing chemicals is useful to overcome this issue. Proteases are enzymes which have extensive applications in leather processing and in several bioremediation processes due to their high alkaline protease activity and dehairing efficacy. In the present study, we report cloning, characterization of a Mn2+ dependent alkaline serine protease gene (MASPT) of Bacillus pumilus TMS55. The gene encoding the protease from B. pumilus TMS55 was cloned and its nucleotide sequence was determined. This gene has an open reading frame (ORF) of 1,149 bp that encodes a polypeptide of 383 amino acid residues. Our analysis showed that this polypeptide is composed of 29 residues N-terminal signal peptide, a propeptide of 79 residues and a mature protein of 275 amino acids. We performed bioinformatics analysis to compare MASPT enzyme with other proteases. Homology modeling was employed to model three dimensional structure for MASPT. Structural analysis showed that MASPT structure is composed of nine α-helices and nine β-strands. It has 3 catalytic residues and 14 metal binding residues. Docking analysis showed that residues S223, A260, N263, T328 and S329 interact with Mn2+. This study allows initial inferences about the structure of the protease and will allow the rational design of its derivatives for structure-function studies and also for further improvement of the enzyme.

Mechanical properties of biobased films prepared from collagen solutions derived from bovine hides

USDA-ARS?s Scientific Manuscript database

The most valuable byproducts of the meat packing industry are hides. The U.S. is the world’s 3rd largest hide producing country and currently produces approximately 35 million cattle hides annually. Due to fierce competition in global markets, the American leather and hides industry is facing chal...

Environmental Pollution, Toxicity Profile and Treatment Approaches for Tannery Wastewater and Its Chemical Pollutants.

PubMed

Saxena, Gaurav; Chandra, Ram; Bharagava, Ram Naresh

Leather industries are key contributors in the economy of many developing countries, but unfortunately they are facing serious challenges from the public and governments due to the associated environmental pollution. There is a public outcry against the industry due to the discharge of potentially toxic wastewater having alkaline pH, dark brown colour, unpleasant odour, high biological and chemical oxygen demand, total dissolved solids and a mixture of organic and inorganic pollutants. Various environment protection agencies have prioritized several chemicals as hazardous and restricted their use in leather processing however; many of these chemicals are used and discharged in wastewater. Therefore, it is imperative to adequately treat/detoxify the tannery wastewater for environmental safety. This paper provides a detail review on the environmental pollution and toxicity profile of tannery wastewater and chemicals. Furthermore, the status and advances in the existing treatment approaches used for the treatment and/or detoxification of tannery wastewater at both laboratory and pilot/industrial scale have been reviewed. In addition, the emerging treatment approaches alone or in combination with biological treatment approaches have also been considered. Moreover, the limitations of existing and emerging treatment approaches have been summarized and potential areas for further investigations have been discussed. In addition, the clean technologies for waste minimization, control and management are also discussed. Finally, the international legislation scenario on discharge limits for tannery wastewater and chemicals has also been discussed country wise with discharge standards for pollution prevention due to tannery wastewater.

Supplement to the "Compendium of Occupational Profiles at the Skilled Blue- and White-collar Worker Level." Situations and Trends: Supply and Demand for Skilled Workers. CEDEFOP Panorama. Supplement.

ERIC Educational Resources Information Center

Sellin, Burkart

A study examined the supply and demand for skilled workers in the following sectors throughout the member countries of the European Community: agriculture (including horticulture and forestry); food industry and trades; hotels, restaurants, and catering industry; tourism; transport; textile industry; textile clothing; leather; wood; building…

16 CFR 24.0 - Scope and purpose of guides.

Code of Federal Regulations, 2010 CFR

2010-01-01

... apply to the manufacture, sale, distribution, marketing, or advertising of all kinds or types of leather... Act (15 U.S.C. 45) to the manufacture, sale, distribution, marketing, and advertising of industry...

Kinetics of leather dyeing pretreated with enzymes: role of acid protease.

PubMed

Kanth, Swarna Vinodh; Venba, Rajangam; Jayakumar, Gladstone Christopher; Chandrababu, Narasimhan Kannan

2009-04-01

In the present investigation, kinetics of dyeing involving pretreatment with acid protease has been presented. Application of acid protease in dyeing process resulted in increased absorption and diffusion of dye into the leather matrix. Enzyme treatment at 1% concentration, 60 min duration and 50 degrees C resulted in maximum of 98% dye exhaustion and increased absorption rate constants. The final exhaustion (C(infinity)) for the best fit of CI Acid Black 194 dye has been 98.5% with K and r2 values from the modified Cegarra-Puente isotherm as 0.1033 and 0.0631. CI Acid Black 194 being a 2:1 metal complex acid dye exhibited higher absorption rate than the acid dye CI Acid Black 210. A reduction in 50% activation energy calculated from Arrhenius equation has been observed in enzyme assisted dyeing process of both the dyes that substantiates enhanced dye absorption. The absorption rate constant calculated with modified Cegarra-Puente equation confirm higher rate constants and faster kinetics for enzyme assisted dyeing process. Enzyme treated leather exhibited richness of color and shade when compared with control. The present study substantiates the essential role of enzyme pretreatment as an eco-friendly leather dyeing process.

Treatment of hides with tara-modified protein products

USDA-ARS?s Scientific Manuscript database

In prior research, we demonstrated that gelatin could be modified with quebracho to produce products whose physicochemical properties would enable them to be used effectively as fillers in leather processing, and that leather resulting from this treatment had improved subjective properties with litt...

Preparation and application of unhairing enzyme using solid wastes from the leather industry-an attempt toward internalization of solid wastes within the leather industry.

PubMed

Ramesh, Renganath Rao; Muralidharan, Vimudha; Palanivel, Saravanan

2018-01-01

Usage of the animal fleshing waste as the source of carbon and nitrogen for animal skin unhairing protease (EC 3.4.21) production along with agro-industrial wastes like wheat bran has been investigated. Thermal hydrolysis of delimed fleshing waste for 3 h yielded a fleshing hydrolysate (FH) having a protein content of 20.86 mg/mL and total solids of 46,600 ppm. The FH was lyophilized and spray dried to obtain fleshing hydrolysate powder (FHP) to be used along with wheat bran and rice bran for protease production. The carbon, nitrogen, hydrogen, and sulfur contents of the FHP were found to be 40.1, 13.8, 5.4, and 0.2%. The control solid-state fermented (SSF) medium without FHP showed a maximum activity of only 550 U/g. A maximum protease activity of 956 U/g was obtained by using 6% FHP (taken based on the combined total weight of wheat bran and rice bran) after 96 h of fermentation, resulting in a 1.7-fold increase in the protease activity. The total cost of producing 1 kg of FHP and the cost of producing 1000 kU of protease using FHP along with wheat bran and rice bran were found to be USD 24.62 and USD 2.08, respectively; 25% of SSF protease along with 40% water was found to be capable of unhairing the sheepskins in 7 h eliminating the hazardous conventional lime sulfide unhairing system. Thus, the leather industry's solid waste internalized for the production of unhairing enzyme resulted in a sustainable solution for pollution problems. Graphical abstract ᅟ.

Characterization of thermo- and detergent stable antigenic glycosylated cysteine protease of Euphorbia nivulia Buch.-Ham. and evaluation of its ecofriendly applications.

PubMed

Badgujar, Shamkant B; Mahajan, Raghunath T

2013-01-01

An antigenic glycosylated cysteine protease has been purified from the latex of Euphorbia nivulia Buch.-Ham. It exhibits remarkable protease activity in the presence of metal ions, oxidizing agents, organic solvents, and detergents. This enzyme showed potential role in leather processing industry due to its dehairing activity for animal hide without hydrolyzing fibrous proteins, producing, by this way, a better quality product. The enzyme can also be used for silver recovering from X-ray plates. In addition, the stability (temperature and surfactants) and hydrolysis of blood stain data also revealed its application in detergent industries. Agriculturally, this protease finds application in biocontrol process against the infectious management of root knot nematode, Meloidogyne incognita. Biologically, it shows noticeable wound healing, haemostatic and antibacterial activity.

Characterization of Thermo- and Detergent Stable Antigenic Glycosylated Cysteine Protease of Euphorbia nivulia Buch.-Ham. and Evaluation of Its Ecofriendly Applications

PubMed Central

Badgujar, Shamkant B.; Mahajan, Raghunath T.

2013-01-01

An antigenic glycosylated cysteine protease has been purified from the latex of Euphorbia nivulia Buch.-Ham. It exhibits remarkable protease activity in the presence of metal ions, oxidizing agents, organic solvents, and detergents. This enzyme showed potential role in leather processing industry due to its dehairing activity for animal hide without hydrolyzing fibrous proteins, producing, by this way, a better quality product. The enzyme can also be used for silver recovering from X-ray plates. In addition, the stability (temperature and surfactants) and hydrolysis of blood stain data also revealed its application in detergent industries. Agriculturally, this protease finds application in biocontrol process against the infectious management of root knot nematode, Meloidogyne incognita. Biologically, it shows noticeable wound healing, haemostatic and antibacterial activity. PMID:24348183

Preliminary study on immobilization of buffing dust by solidification method in ceramic brick

NASA Astrophysics Data System (ADS)

Yuliansyah, Ahmad Tawfiequrrahman; Prasetya, Agus; Putra, Arif Eka; Satriawan, Humam Budi

2017-11-01

Leather-based industries generate a substantial amount of hazardous solid and liquid wastes in their process. One of the solid wastes is buffing dust, which is fine particulates containing fat, tanning, dyes and chromium. From 1 ton of leather processed, approximately 2-6 kg of buffing dust is generated. Chromium in the buffing dust is carcinogenic, so a proper handling is highly required. Solidification is a method commonly used to immobilize toxic material. Hence, the material is trapped in a matrix made of binding agents to minimize its mobility. However, a very small amount of the materials is sometimes released to the environment during storage. This study investigates leaching process of chromium from immobilized buffing dust in ceramic brick. Buffing dust, which contains chromium, is solidified by mixing it with clay at certain compositions and fired in a muffle furnace to produce a ceramic brick. Performance of the solidification process is evaluated by measuring the leaching of chromium in the leaching test. The results show that the solidification has significantly reduced the potential release of chromium to the environment. Higher of the firing temperature, less chromium is leached from ceramic brick. The chromium concentration of leachate water from 800°C brick is 0.376 ppm, while those from 850 and 900°C brick are 0.212 and 0.179 ppm respectively.

From Waste to Healing Biopolymers: Biomedical Applications of Bio-Collagenic Materials Extracted from Industrial Leather Residues in Wound Healing

PubMed Central

Catalina, Mercedes; Cot, Jaume; Borras, Miquel; de Lapuente, Joaquín; González, Javier; Balu, Alina M.; Luque, Rafael

2013-01-01

The biomedical properties of a porous bio-collagenic polymer extracted from leather industrial waste residues have been investigated in wound healing and tissue regeneration in induced wounds in rats. Application of the pure undiluted bio-collagen to induced wounds in rats dramatically improved its healing after 7 days in terms of collagen production and wound filling as well as in the migration and differentiation of keratinocytes. The formulation tested was found to be three times more effective than the commercial reference product Catrix® (Heal Progress (HP): 8 ± 1.55 vs. 2.33 ± 0.52, p < 0.001; Formation of Collagen (FC): 7.5 ± 1.05 vs. 2.17 ± 0.75, p < 0.001; Regeneration of Epidermis (RE): 13.33 ± 5.11 vs. 5 ± 5.48, p < 0.05). PMID:28809231

Quantification of patulin in fruit leathers by ultra-high-performance liquid chromatography-photodiode array (UPLC-PDA).

PubMed

Maragos, Chris M; Busman, Mark; Ma, Liang; Bobell, John

2015-01-01

Patulin is a mycotoxin commonly found in certain fruit and fruit products. For this reason many countries have established regulatory limits pertaining to, in particular, apple juice and apple products. Fruit leathers are produced by dehydrating fruit puree, leaving a sweet product that has a leathery texture. A recent report in the literature described the detection of patulin at substantial levels in fruit leathers. To investigate this further, an ultra-high-performance liquid chromatography-photodiode array (UPLC-PDA) method was developed for the sensitive detection of patulin in fruit leathers. Investigations were also made of the suitability of direct analysis in real time-mass spectrometry (DART-MS) for detection of patulin from the surface of fruit leathers. Results indicated DART-MS was insufficiently sensitive for quantification from the surface of home-style apple leathers, although patulin spiked onto the surface of leather or peel could be detected. The UPLC-PDA method was used to determine the fate of patulin during the preparation of home-made fruit leathers. Interestingly, when a home-style process was used, the patulin was not destroyed, but rather increased in concentration as the puree was dehydrated. The UPLC-PDA method was also used to screen for patulin in commercial fruit leathers. Of the 36 products tested, 14 were above the limit of detection (3.5 μg kg(-1)) and nine were above the limit of quantification (12 μg kg(-1)). Positive samples were confirmed by UPLC-MS/MS. Only one sample was found above the US regulatory limit for single-strength apple juice products (50 μg kg(-1)). These results suggest patulin can be concentrated during preparation and can be found in fruit leathers. The limited survey suggests that patulin is fairly prevalent in such commercial products, but that the levels are usually low.

Controlling mechanisms of moisture diffusion in convective drying of leather

NASA Astrophysics Data System (ADS)

Benmakhlouf, Naima; Azzouz, Soufien; Monzó-Cabrera, Juan; Khdhira, Hechmi; ELCafsi, Afif

2017-04-01

Leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture. It occurs several times in the tanning course. As it is the target of this paper to depict an experimental way to determine moisture diffusion in the convective drying of leather. The effective diffusion coefficient is estimated by a method derived from Fick's law and by analytic method. The effective diffusion coefficients are obtained from drying tests and the diffusivity behaviour is studied versus the controlling parameter such as the convective airflow temperature. The experiments were conducted at hot air temperatures of 40, 45, 50, 55 and 60 °C and hot air speed of 1 m/s. The hot air temperature had significant effect on the effective moisture diffusivity of the leather sample. The average effective moisture diffusivity in rosehip ranged between 5.87 × 10-11 and 14.48 × 10-11 m2/s for leather at the temperatures studied. Activation energy for convective drying was found to be 38.46 kJ/mol for leather. The obtained results fully confirm the theoretical study in which an exponentially increasing relationship between effective diffusivity and temperature is predicted. The results of this study provide a better understanding of the drying mechanisms and may lead to a series of recommendations for leather drying optimization. It opens the possibility for further investigations on the description of drying conditions.

Modeling of Cr contamination in the agricultural lands of three villages near the leather industry in Kasur, Pakistan, using statistical and GIS techniques.

PubMed

Shafiq, Muhammad; Shaukat, Tahira; Nazir, Aisha; Bareen, Firdaus-E-

2017-08-01

Kasur is one of the hubs of leather industry in the Punjab, Pakistan, where chrome tanning method of leather processing is extensively being used. Chromium (Cr) accumulation levels in the irrigation water, soil, and seasonal vegetables were studied in three villages located in the vicinity of wastewater treatment plant and solid waste dumping site operated by the Kasur Tanneries Waste Management Agency (KTWMA). The data was interpreted using analysis of variance (ANOVA), clustering analysis (CA), and principal component analysis (PCA). Interpolated surface maps for Cr were generated using the actual data obtained for the 30 sampling sites in each of the three villages for irrigation water, soil, and seasonal vegetables. The level of contamination in the three villages was directly proportional to their distance from KTWMA wastewater treatment plant and the direction of water runoff. The highest level of Cr contamination in soil (mg kg -1 ) was observed at Faqeeria Wala (37.67), intermediate at Dollay Wala (30.33), and the least in Maan (25.16). A gradational variation in Cr accumulation was observed in the three villages from contaminated wastewater having the least contamination level (2.02-4.40 mg L -1 ), to soil (25.16-37.67 mg kg -1 ), and ultimately in the seasonal vegetable crops (156.67-248.33 mg kg -1 ) cultivated in the region, having the highest level of Cr contamination above the permissible limit. The model used not only predicted the current situation of Cr contamination in the three villages but also indicated the trend of magnification of Cr contamination from irrigation water to soil and to the base of the food chain. Among the multiple causes of Cr contamination of vegetables, soil irrigation with contaminated groundwater was observed to be the dominant one.

Microbial enzymes with special characteristics for biotechnological applications.

PubMed

Nigam, Poonam Singh

2013-08-23

This article overviews the enzymes produced by microorganisms, which have been extensively studied worldwide for their isolation, purification and characterization of their specific properties. Researchers have isolated specific microorganisms from extreme sources under extreme culture conditions, with the objective that such isolated microbes would possess the capability to bio-synthesize special enzymes. Various Bio-industries require enzymes possessing special characteristics for their applications in processing of substrates and raw materials. The microbial enzymes act as bio-catalysts to perform reactions in bio-processes in an economical and environmentally-friendly way as opposed to the use of chemical catalysts. The special characteristics of enzymes are exploited for their commercial interest and industrial applications, which include: thermotolerance, thermophilic nature, tolerance to a varied range of pH, stability of enzyme activity over a range of temperature and pH, and other harsh reaction conditions. Such enzymes have proven their utility in bio-industries such as food, leather, textiles, animal feed, and in bio-conversions and bio-remediations.

Decorin content and near infrared spectroscopy analysis of dried collagenous biomaterial samples

USDA-ARS?s Scientific Manuscript database

The efficient removal of proteoglycans, such as decorin, from hide when processing it traditionally to leather is generally acceptable and beneficial for leather quality, especially for softness and flexibility. The objective of this research was to determine the residual decorin content of dried c...

Potential of near-infrared spectroscopy for quality evaluation of cattle leather.

PubMed

Braz, Carlos Eduardo M; Jacinto, Manuel Antonio C; Pereira-Filho, Edenir R; Souza, Gilberto B; Nogueira, Ana Rita A

2018-05-09

Models using near-infrared spectroscopy (NIRS) were constructed based on physical-mechanical tests to determine the quality of cattle leather. The following official parameters were used, considering the industry requirements: tensile strength (TS), percentage elongation (%E), tear strength (TT), and double hole tear strength (DHS). Classification models were constructed with the use of k-nearest neighbor (kNN), soft independent modeling of class analogy (SIMCA), and partial least squares-discriminant analysis (PLS-DA). The evaluated figures of merit, accuracy, sensitivity, and specificity presented results between 85% and 93%, and the false alarm rates from 9% to 14%. The model with lowest validation percentage (92%) was kNN, and the highest was PLS-DA (100%). For TS, lower values were obtained, from 52% for kNN and 74% for SIMCA. The other parameters %E, TT, and DHS presented hit rates between 87 and 100%. The abilities of the models were similar, showing they can be used to predict the quality of cattle leather. Copyright © 2018 Elsevier B.V. All rights reserved.

A questionnaire-based survey of dry eye disease among leather tannery workers in Kanpur, India: a case-control study.

PubMed

Gupta, Ramesh Chandra; Ranjan, Ratnesh; Kushwaha, Raj Nath; Khan, Perwez; Mohan, Shalini

2014-12-01

Kanpur is a major leather processing center in India, where a large number of tanneries are situated. During tanning process, workers are constantly exposed to heat, leather dust produced in buffering operations and a wide range of chemicals. All these factors are known to cause dry eye. Being ophthalmologists of a tertiary health care center in Kanpur, we used to notice over a period of time that a considerable number of patients with dry eye symptoms, attending our out-patient department, were related to leather tanning industries. But, no published data is available on the prevalence of and risk factors for dry eye disorders among tannery worker. To estimate the prevalence of dry eye problem and its severity among the workers of leather tanneries in the industrial belt of Kanpur and to evaluate various risk factors related to it. In this cross-sectional case-control study, Ocular Surface Disease Index (OSDI) Questionnaire was presented to randomly selected tannery workers and control group. OSDI score was calculated based on subjects' response, and was evaluated with OSDI chart to assess the magnitude of dry eye symptoms and to grade its severity. RESULTS were analyzed statistically to evaluate the significance level. A total of 800 workers were selected by simple random sampling, out of which 72 workers were excluded from the study. Thus the questionnaire was presented to a total of 728 workers, while control group included 260 individuals. All the workers as well as controls were male with age ranging from 20 to 59 years. The mean age for tannery workers was 34.05 ± 8.96 years and that for control group was 32.97 ± 10.59 years (p = 0.14). The tannery workers had mean duration of work at tanneries for 6.99 ± 4.86 years. The prevalence of dry eye symptoms among tannery workers was 33.79% (95% CI: 30.35-37.24), while that in control group was 15.77% (95% CI: 11.31-20.23) (p < 0.0001). Among symptomatic workers, 47.96% (95% CI: 41.68-54.26) workers had mild, 36.99% (95% CI: 30.91-43.07) workers had moderate and 15.04% (95% CI: 10.54-19.54) workers had severe dry eye symptoms. Severe symptoms were more prevalent among symptomatic workers of age ≥ 40 years in comparison to those <40 years (34.72% versus 6.90%, p < 0.0001). With increase in duration of work (1-5, 6-15 and 16-25 years), both prevalence and severity of dry eye symptoms increased significantly (p = 0.036 and <0.0001, respectively). Dry eye is a significantly prevalent occupational hazard among tannery workers, severity of which increases with the age and the duration of work in tannery. Chemical exposure in hot and dusty working environment of a tannery may have a causative role. Tannery workers should be motivated to use various preventive measures to reduce chemical and dust exposure such as wearing protective glasses, and their ocular health should be monitored periodically for adequate and timely treatment, if required.

Techno-economic evaluation of membrane filtration for the recovery and re-use of tanning chemicals.

PubMed

Scholz, W; Lucas, M

2003-04-01

The majority of pollution generated from leather manufacturing can be contributed to the inefficiency of chemical use in leather processing and to organic substances derived from the hides during processing. In particular, the overall tanning processes performed in drums can be characterized by a high consumption of water and chemicals, most of which are found in the final wastewater. To ensure full penetration and reaction of chemicals with collagen, chemicals are added in excess and are only partly up-taken by the leather. Significant savings of chemicals can be achieved by recovery and recycling of chemicals and water from part streams, thus reducing environmental impacts. This research formed an integrated approach to investigate and exploit the potential of a closed loop operation for various part streams of tanneries. Each of the process streams was separately collected, treated and purified by membrane technologies to obtain a recyclable liquor which can be re-used operationally. In this way a complete recovery of process liquors can be achieved for immediate operational re-use. Membrane technology has been applied to recover chemicals from un-hairing, vegetable tanning, chrome liquors and to polish saline part streams for re-use. By applying membrane filtration up to 90% of the treated liquors can be recovered giving a remaining concentrate volume of only 10%. The permeate obtained from several process areas contained to a high extent chemicals, which were re-used for leather processing.

40 CFR 63.5345 - How do I distinguish between the two upholstery product process operations?

Code of Federal Regulations, 2013 CFR

2013-07-01

... polyester film or equivalent material substrate. (c) Any appropriate engineering units may be used for... years if the applied finish chemical characteristics of the leather product have not changed, or when the applied finish chemical characteristics of the leather product change, whichever is sooner. [67 FR...

40 CFR 63.5345 - How do I distinguish between the two upholstery product process operations?

Code of Federal Regulations, 2011 CFR

2011-07-01

... polyester film or equivalent material substrate. (c) Any appropriate engineering units may be used for... years if the applied finish chemical characteristics of the leather product have not changed, or when the applied finish chemical characteristics of the leather product change, whichever is sooner. [67 FR...

40 CFR 63.5345 - How do I distinguish between the two upholstery product process operations?

Code of Federal Regulations, 2010 CFR

2010-07-01

... polyester film or equivalent material substrate. (c) Any appropriate engineering units may be used for... years if the applied finish chemical characteristics of the leather product have not changed, or when the applied finish chemical characteristics of the leather product change, whichever is sooner. [67 FR...

Issues of environmental compliance in developing countries.

PubMed

Singh, S; Rajamani, S

2003-01-01

Environmental laws define the scarcity of environmental resources as they affect the factor endowment of a country and therefore its position in the international division of labour. There is now also a general agreement that applying the "polluter pays" principle should solve environmental problems. As the burden of abatement increases, as measured by the ratio of abatement expenditure to sales, there is definitely an incentive for firms to either invest in cleaner technology or more efficient abatement technology. There is also evidence that taxes and charges, designed to internalise externalities, can actually affect trade. It is interesting to know if the developing countries face particular market access problems in the face of stringent environmental standards and regulations. While it is true that stringent measures impose market access restrictions and cause limitations on competitiveness, this is much more widely felt by the developing countries because of lack of infrastructure and monitoring facilities, limited technology choices, inadequate access to environment-friendly raw materials, lack of complete information, presence of small-scale exporters and emergence of environmental standards in sectors of export interest to developing countries. The small and medium enterprises often divert sales either to the domestic market or to external markets where environmental requirements are less stringent, in order to save on their costs. In developing countries, 80% of the tanning industry is comprised of small and medium enterprises (SMEs) processing raw to semi-finished leather, usually less than 2 tons per day. In Europe and other developed countries the SMEs in the leather sector have vanished due to strict environmental legislation and this will likely occur in developing countries also. The environmental legislation has not always been practical, either because the laws are too ambitious or unrealistic in certain parameters, or because they have lacked effective instrumentation and institutional support. Some environmental regulations have not succeeded as they do not match the technical requirements and economic reality of the country or region, or because they do not take the institutional capabilities of the society that has to implement them into consideration. For the survival and sustenance of the SMEs in the leather industry, it may be a viable alternative to carry out the tanning process in a decentralized fashion such that the raw to semi-finished process is carried out in the large scale sector while the semi-finished to finished process could either be reserved or open to competition as per the countries' requirements. But the issue of concern is whether it is fair that the raw to semi-finished tanning process, containing 70% of the pollution discharge should be undertaken by developing countries alone, especially if it is at the cost of their survival! However, the game analysed in the paper reveals that tanning units in developing countries would prefer to comply with the regulations and stay in the industry, the alternatives being to collude or to compete!

Removal of organic dyes using Cr-containing activated carbon prepared from leather waste.

PubMed

Oliveira, Luiz C A; Coura, Camila Van Zanten; Guimarães, Iara R; Gonçalves, Maraisa

2011-09-15

In this work, hydrogen peroxide decomposition and oxidation of organics in aqueous medium were studied in the presence of activated carbon prepared from wet blue leather waste. The wet blue leather waste, after controlled pyrolysis under CO(2) flow, was transformed into chromium-containing activated carbons. The carbon with Cr showed high microporous surface area (up to 889 m(2)g(-1)). Moreover, the obtained carbon was impregnated with nanoparticles of chromium oxide from the wet blue leather. The chromium oxide was nanodispersed on the activated carbon, and the particle size increased with the activation time. It is proposed that these chromium species on the carbon can activate H(2)O(2) to generate HO radicals, which can lead to two competitive reactions, i.e. the hydrogen peroxide decomposition or the oxidation of organics in water. In fact, in this work we observed that activated carbon obtained from leather waste presented high removal of methylene blue dye combining the adsorption and oxidation processes. Copyright © 2011 Elsevier B.V. All rights reserved.

Biodegradable containers from green waste materials

NASA Astrophysics Data System (ADS)

Sartore, Luciana; Schettini, Evelia; Pandini, Stefano; Bignotti, Fabio; Vox, Giuliano; D'Amore, Alberto

2016-05-01

Novel biodegradable polymeric materials based on protein hydrolysate (PH), derived from waste products of the leather industry, and poly(ethylene glycol) diglycidyl ether (PEG) or epoxidized soybean oil (ESO) were obtained and their physico-chemical properties and mechanical behaviour were evaluated. Different processing conditions and the introduction of fillers of natural origin, as saw dust and wood flour, were used to tailor the mechanical properties and the environmental durability of the product. The biodegradable products, which are almost completely manufactured from renewable-based raw materials, look promising for several applications, particularly in agriculture for the additional fertilizing action of PH or in packaging.

The 1985 Army Experience Survey: Methodology and Recommendations for Future Administrations

DTIC Science & Technology

1986-01-01

Leather products, except footwear (315-317, 319) 111 Bakery products (205) 112 Sugar and confectionery products (206) 120 Beverage industries (208...Engineers, n.e.c. (1639) 013 Managers, marketing , advertising, and public relations 063 Surveyors and mapping scientists (164) (125) Mathematical and

Effect of Solar Radiation on Viscoelastic Properties of Bovine Leather: Temperature and Frequency Scans

NASA Astrophysics Data System (ADS)

Nalyanya, Kallen Mulilo; Rop, Ronald K.; Onyuka, Arthur S.

2017-04-01

This work presents both analytical and experimental results of the effect of unfiltered natural solar radiation on the thermal and dynamic mechanical properties of Boran bovine leather at both pickling and tanning stages of preparation. Samples cut from both pickled and tanned pieces of leather of appropriate dimensions were exposed to unfiltered natural solar radiation for time intervals ranging from 0 h (non-irradiated) to 24 h. The temperature of the dynamic mechanical analyzer was equilibrated at 30°C and increased to 240°C at a heating rate of 5°C \\cdot Min^{-1}, while its oscillation frequency varied from 0.1 Hz to 100 Hz. With the help of thermal analysis (TA) control software which analyzes and generates parameter means/averages at temperature/frequency range, the graphs were created by Microsoft Excel 2013 from the means. The viscoelastic properties showed linear frequency dependence within 0.1 Hz to 30 Hz followed by negligible frequency dependence above 30 Hz. Storage modulus (E') and shear stress (σ ) increased with frequency, while loss modulus (E''), complex viscosity (η ^{*}) and dynamic shear viscosity (η) decreased linearly with frequency. The effect of solar radiation was evident as the properties increased initially from 0 h to 6 h of irradiation followed by a steady decline to a minimum at 18 h before a drastic increase to a maximum at 24 h. Hence, tanning industry can consider the time duration of 24 h for sun-drying of leather to enhance the mechanical properties and hence the quality of the leather. At frequencies higher than 30 Hz, the dynamic mechanical properties are independent of the frequency. The frequency of 30 Hz was observed to be a critical value in the behavior in the mechanical properties of bovine hide.

Prevalence and determinants of asthma in adult male leather tannery workers in Karachi, Pakistan: A cross sectional study

PubMed Central

Shahzad, Khurram; Akhtar, Saeed; Mahmud, Sadia

2006-01-01

Background This study aimed to estimate the prevalence and to identify some risk factors of adult asthma in male leather tannery workers in Karachi, Pakistan. Methods A cross sectional study was conducted from August 2003 to March 2004 on leather tannery workers of Karachi, Pakistan. Data were collected from 641 workers engaged in 95 different tanneries in Korangi industrial area selected as sample of convenience. Face to face interviews were performed using a structured pre-tested questionnaire by trained data collectors. Results Prevalence of adult asthma was 10.8% (69/641) in this study population. The prevalence of perceived work-related asthma was 5.3% (34/641). Multivariable logistic regression model showed that after taking into account the age effect, the leather tannery worker were more likely to be asthmatic, if they were illiterate (adjusted OR = 2.13, 95% CI: 1.17–3.88), of Pathan ethnicity (adjusted OR = 2.69; 95% CI: 1.35–5.36), ever-smoked (adjusted OR = 2.22, 95% CI: 1.16–4.26), reportedly never used gloves during different tanning tasks (OR = 3.28; 95% CI : 1.72–6.26). Also, the final model showed a significant interaction between perceived allergy and duration of work. Those who perceived to have allergy were more likely to have asthma if their duration of work was 8 years (adjusted OR = 2.26; 95% CI: 1.19 – 4.29) and this relationship was even stronger if duration was 13 years (adjusted OR = 3.67; 95% CI: 1.98–6.79). Conclusion Prevalence of asthma in leather tannery workers appears to be high and is associated with educational status, ethnicity, smoking, glove use, perceived to have allergy and duration of work. PMID:17144930

Cancer incidence in the Swedish leather tanning industry: updated findings 1958-99.

PubMed

Mikoczy, Z; Hagmar, L

2005-07-01

To assess how a 10 year extension of the follow up period affected cancer incidence in the Swedish leather tanning cohort. A cohort of 2027 tannery workers (of which 482 were women) who had been employed for at least one year between 1900 and 1989 at one of three Swedish leather tanneries, was established. The start of observation varied between 1958 and 1966 for the three plants. Through linkage with the Swedish Cancer Registry, incident cancer cases were recorded up to 1999. Cause specific expected cancer incidence was calculated for 1958-99 based on calendar year, sex, and five year age group specific incidence rates for the counties where the plants had been located. Altogether 56,022 person-years at risk were generated. A total of 351 incident cancer cases were observed compared to 302 expected, which resulted in an increased standardised incidence ratio (SIR) of 1.16 (95% CI 1.04 to 1.29). An enhanced risk for prostate cancer was observed (SIR 1.44, 95% CI 1.10 to 1.86), mainly attributable to the later part of the observation period (1990-99). In this updated analysis the previously observed risk excess for soft tissue sarcomas was no longer significant (SIR 2.62, 95% CI 0.96 to 5.70). For multiple myelomas and sinonasal cancer the slight non-significant excesses remained, still based on very few cases. The increased risk for prostate cancer in the present study might be a chance finding, but is noteworthy, since it is in acccordance with the finding of increased SIR for prostate cancer among leather workers in another recent Swedish study. Moreover, excess risks for prostate cancer among farmers have been reported, indicating pesticides as possible causative agents. Leather tanners have also been exposed to pesticides.

Prevalence and determinants of asthma in adult male leather tannery workers in Karachi, Pakistan: a cross sectional study.

PubMed

Shahzad, Khurram; Akhtar, Saeed; Mahmud, Sadia

2006-12-05

This study aimed to estimate the prevalence and to identify some risk factors of adult asthma in male leather tannery workers in Karachi, Pakistan. A cross sectional study was conducted from August 2003 to March 2004 on leather tannery workers of Karachi, Pakistan. Data were collected from 641 workers engaged in 95 different tanneries in Korangi industrial area selected as sample of convenience. Face to face interviews were performed using a structured pre-tested questionnaire by trained data collectors. Prevalence of adult asthma was 10.8% (69/641) in this study population. The prevalence of perceived work-related asthma was 5.3% (34/641). Multivariable logistic regression model showed that after taking into account the age effect, the leather tannery worker were more likely to be asthmatic, if they were illiterate (adjusted OR = 2.13, 95% CI: 1.17-3.88), of Pathan ethnicity (adjusted OR = 2.69; 95% CI: 1.35-5.36), ever-smoked (adjusted OR = 2.22, 95% CI: 1.16-4.26), reportedly never used gloves during different tanning tasks (OR = 3.28; 95% CI : 1.72-6.26). Also, the final model showed a significant interaction between perceived allergy and duration of work. Those who perceived to have allergy were more likely to have asthma if their duration of work was 8 years (adjusted OR = 2.26; 95% CI: 1.19 - 4.29) and this relationship was even stronger if duration was 13 years (adjusted OR = 3.67; 95% CI: 1.98-6.79). Prevalence of asthma in leather tannery workers appears to be high and is associated with educational status, ethnicity, smoking, glove use, perceived to have allergy and duration of work.

Biochemical and Molecular Characterization of a Serine Keratinase from Brevibacillus brevis US575 with Promising Keratin-Biodegradation and Hide-Dehairing Activities

PubMed Central

Jaouadi, Nadia Zaraî; Rekik, Hatem; Badis, Abdelmalek; Trabelsi, Sahar; Belhoul, Mouna; Yahiaoui, Amina Benkiar; Aicha, Houda Ben; Toumi, Abdessatar; Bejar, Samir; Jaouadi, Bassem

2013-01-01

Dehairing is one of the highly polluting operations in the leather industry. The conventional lime-sulfide process used for dehairing produces large amounts of sulfide, which poses serious toxicity and disposal problems. This operation also involves hair destruction, a process that leads to increased chemical oxygen demand (COD), biological oxygen demand (BOD), and total suspended solid (TSS) loads in the effluent. With these concerns in mind, enzyme-assisted dehairing has often been proposed as an alternative method. The main enzyme preparations so far used involved keratinases. The present paper reports on the purification of an extracellular keratinase (KERUS) newly isolated from Brevibacillus brevis strain US575. Matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF/MS) analysis revealed that the purified enzyme was a monomer with a molecular mass of 29121.11 Da. The sequence of the 27 N-terminal residues of KERUS showed high homology with those of Bacillus keratinases. Optimal activity was achieved at pH 8 and 40°C. Its thermoactivity and thermostability were upgraded in the presence of 5 mM Ca2+. The enzyme was completely inhibited by phenylmethanesulfonyl fluoride (PMSF) and diiodopropyl fluorophosphates (DFP), which suggests that it belongs to the serine protease family. KERUS displayed higher levels of hydrolysis, substrate specificity, and catalytic efficiency than NUE 12 MG and KOROPON® MK EG keratinases. The enzyme also exhibited powerful keratinolytic activity that made it able to accomplish the entire feather-biodegradation process on its own. The kerUS gene encoding KERUS was cloned, sequenced, and expressed in Escherichia coli. The biochemical properties of the extracellular purified recombinant enzyme (rKERUS) were similar to those of native KERUS. Overall, the findings provide strong support for the potential candidacy of this enzyme as an effective and eco-friendly alternative to the conventional chemicals used for the dehairing of rabbit, goat, sheep and bovine hides in the leather processing industry. PMID:24146914

Optimization of a novel enzyme treatment process for early-stage processing of sheepskins.

PubMed

Lim, Y F; Bronlund, J E; Allsop, T F; Shilton, A N; Edmonds, R L

2010-01-01

An enzyme treatment process for early-stage processing of sheepskins has been previously reported by the Leather and Shoe Research Association of New Zealand (LASRA) as an alternative to current industry operations. The newly developed process had marked benefits over conventional processing in terms of a lowered energy usage (73%), processing time (47%) as well as water use (49%), but had been developed as a "proof of principle''. The objective of this work was to develop the process further to a stage ready for adoption by industry. Mass balancing was used to investigate potential modifications for the process based on the understanding developed from a detailed analysis of preliminary design trials. Results showed that a configuration utilising a 2 stage counter-current system for the washing stages and segregation and recycling of enzyme float prior to dilution in the neutralization stage was a significant improvement. Benefits over conventional processing include a reduction of residual TDS by 50% at the washing stages and 70% savings on water use overall. Benefits over the un-optimized LASRA process are reduction of solids in product after enzyme treatment and neutralization stages by 30%, additional water savings of 21%, as well as 10% savings of enzyme usage.

[A dynamic study of sentinel surveillance for occupational hazard in typical industrial enterprises in Guangzhou, China, from 2012 to 2014].

PubMed

Wang, Zhi; Rong, Xing; Li, Yongqin; Zeng, Wenfeng; Du, Weijia; Liu, Yimin

2015-08-01

To perform a sampling survey of occupational hazard in typical industrial enterprises in Guangzhou, China, by means of sentinel surveillance, to understand the classification, distribution, and concentration/intensity of occupational hazard as well as the characteristics and development of occupational health management in Guangzhou, and to provide a scientific basis for occupational health supervision. Fifteen enterprises in information technology (IT), shipbuilding, chemical, leather and footwear, and auto repair industries were enrolled as subjects. Dynamic surveillance for occupational hazard and occupational health management was performed in workplaces of those enterprises. The overall overproof rate of occupational hazard in the 15 sentinel enterprises from 2012 to 2014 was 6.16% (45/731). There was no significant difference in the overproof rate between the three years (P > 0.05). During the three years, enterprises in shipbuilding industry had significant higher overproof rates than those in other industries (P < 0.05). According to the results of occupational health management questionnaire, the overall coincidence rate of survey items was 57.88% (393/679); enterprises in IT industry had significant lower coincidence rates than those in other industries in 2012 and 2014 (47.62%, 29.63%; P < 0.05), while enterprises in leather and footwear industry had significant lower coincidence rates than those in other industries in 2013 (40.63%; P < 0.05). The enterprises in shipbuilding industry are the key to the prevention and control of occupational hazard in Guangzhou. To strengthen surveillance for occupational health in workplaces in Guangzhou, it is important to enhance occupation health supervision among small and micro enterprises and develop continuous sentinel surveillance for occupational hazard in key industries.

Optimising the biogas production from leather fleshing waste by co-digestion with MSW.

PubMed

Shanmugam, P; Horan, N J

2009-09-01

Waste from the leather industry, known as limed leather fleshing (LF), has a low C:N (3.2) and an alkaline pH of 11.4. This is a major disadvantage for anaerobic digestion due to ammonia toxicity for methanogenesis. This study describes co-digestion of LF with biodegradable fraction of municipal solids waste optimised over a range of C:N and pH to minimise ammonia and to maximise biogas yield. The optimum conditions were found with a blend that provided C:N of 15 and pH of 6.5 and the cumulative biogas yield increased from 560 mL using LF fraction alone, to 6518 mL with optimum blend. At higher pH of 8.5, unionised ammonia was high (2473 mg L(-1)) coincided with poor biogas yield (47 m Ld(-1)) that confirms ammonia toxicity. By contrast at a pH of 4.5 the ammonia was minimum (510 mg L(-1)), but high VFA (26,803 mg L(-1)) inhibited the methanogens. Biomass activity measured using ATP correlated well with biogas yield as reported previously.

Enzyme-mediated bacterial biodegradation of an azo dye (C.I. Acid blue 113): reuse of treated dye wastewater in post-tanning operations.

PubMed

Senthilvelan, T; Kanagaraj, J; Panda, R C

2014-11-01

"Dyeing" is a common practice used to color the hides during the post-tanning operations in leather processing generating plenty of wastewater. The waste stream containing dye as pollutant is severely harmful to living beings. An azo dye (C.I. Acid Blue 113) has been biodegraded effectively by bacterial culture mediated with azoreductase enzyme to reduce the pollution load in the present investigation. The maximum rate of dye degradation was found to be 96 ± 4 and 92 ± 4 % for the initial concentrations of 100 and 200 mg/l, respectively. The enzyme activity was measured using NADH as a substrate. Fourier transform infrared spectroscopy (FT-IR) analysis was confirmed that the transformation of azo linkage could be transformed into N2 or NH3 or incorporated into complete biomass. Breaking down of dye molecules to various metabolites (such as aniline, naphthalene-1,4-diamine, 3-aminobenzenesulfonic acid, naphthalene-1-sulfonic acid, 8-aminonaphthalene-1-sulfonic acid, 5,8-diaminonaphthalene-1-sulfonic acid) was confirmed by gas chromatography and mass spectra (GC-MS) and mass (electrospray ionization (ESI)) spectra analysis. The treated wastewater could be reused for dyeing operation in the leather processing, and the properties of produced leather were evaluated by conventional methods that revealed to have improved dye penetration into the grain layer of experimental leather sample and resulted in high levelness of dyeing, which helps to obtain the desired smoothness and soft leather properties.

Impact of leather industries on fluoride dynamics in groundwater around a tannery cluster in South India.

PubMed

Sajil Kumar, P J

2013-03-01

The aim of this study was to investigate the controls of leather industries on fluoride contamination in and around a tannery cluster in Vaniyambadi. Hydrochemical analysis, mineral saturation indices and statistical methods were used to evaluate the intervening factors that controls the contamination processes. Fluoride in groundwater is exceeded the WHO guideline value (1.5 mg/L), in 62 % of the samples, mostly with Na-HCO3 and Na-Cl type of water. Results of the principal component analysis grouped Na, F, HCO3 and NO3 under component 1. This result was in agreement with the cross plot indicating high positive correlation between F and Na (r (2)  = 0.87), HCO3 (r (2)  = 0.84) and NO3 (r (2)  = 0.55). Fluorite (CaF2) and Halite (NaCl) was undersaturated, while calcite (CaCO3) was oversaturated for all the samples. This suggest more dissolution of F-rich minerals under the active supports of Na. Bivariate plots of Na versus Cl and Na + K versus HCO3 showed a combined origin of Na from tannery effluent as well as silicate weathering. Two major clusters, based on the Na, HCO3 and F concentration showed that groundwater is affected by tanneries and silicate weathering. Fluoride concentration in 38 % of samples (n = 5) have significantly affected by the high Na concentration from tanneries.

40 CFR Figure 1 to Subpart Tttt of... - Example Logs for Recording Leather Finish Use and HAP Content

Code of Federal Regulations, 2010 CFR

2010-07-01

... Finishing Operations Part 63, Subpt. TTTT, Fig. 1 Figure 1 to Subpart TTTT of Part 63—Example Logs for Recording Leather Finish Use and HAP Content Month:______Year:______ Finish Inventory Log Finish type Finish usage(pounds) HAP Content(mass fraction) Date and time Operator's name Product process operation Monthly...

Proposed Expansion of Acme Landfill Operations.

DTIC Science & Technology

1982-08-01

plastic beverage bottles, cardboard, wood, yardwastes, textiles , rubber, and leather. In addition to traditional activities, a central processing center...from food and garden wastes), a considerable portion of the leachate strength may be attributable to the textiles , rubber, leather, wood, paper, and...poisoning); mosquitos which may carry viral diseases such as encephalitis, malaria, and yellow fever; rodents which are carriers of enteric and other

Can green solvents be alternatives for thermal stabilization of collagen?

PubMed

Mehta, Ami; Rao, J Raghava; Fathima, Nishter Nishad

2014-08-01

"Go Green" campaign is gaining light for various industrial applications where water consumption needs to be reduced. To resolve this, industries have adopted usage of green, organic solvents, as an alternative to water. For leather making, tanning industry consumes gallons of water. Therefore, for adopting green solvents in leather making, it is necessary to evaluate its influence on type I collagen, the major protein present in the skin matrix. The thermal stability of collagen from rat tail tendon fiber (RTT) treated with seven green solvents namely, ethanol, ethyl lactate, ethyl acetate, propylene carbonate, propylene glycol, polyethylene glycol-200 and heptane was determined using differential scanning calorimetry (DSC). Crosslinking efficiency of basic chromium sulfate and wattle on RTT in green solvents was determined. DSC thermograms show increase in thermal stability of RTT collagen against heat with green solvents (>78°C) compared to water (63°C). In the presence of crosslinkers, RTT demonstrated thermal stability >100°C in some green solvents, resulting in increased intermolecular forces between collagen, solvent and crosslinkers. The significant improvement in thermal stability of collagen potentiates the capability of green solvents as an alternative for water. Copyright © 2014 Elsevier B.V. All rights reserved.

The removal of the trivalent chromium from the leather tannery wastewater: the optimisation of the electro-coagulation process parameters.

PubMed

GilPavas, E; Dobrosz-Gómez, I; Gómez-García, M Á

2011-01-01

The capacity of the electro-coagulation (EC) process for the treatment of the wastewater containing Cr3+, resulting from a leather tannery industry placed in Medellin (Colombia), was evaluated. In order to assess the effect of some parameters, such as: the electrode type (Al and/or Fe), the distance between electrodes, the current density, the stirring velocity, and the initial Cr3+ concentration on its efficiency of removal (%RCr+3), a multifactorial experimental design was used. The %RCr3+ was defined as the response variable for the statistical analysis. In order to optimise the operational values for the chosen parameters, the response surface method (RSM) was applied. Additionally, the Biological Oxygen Demand (BOD5), the Chemical Oxygen Demand (COD), and the Total Organic Carbon (TOC) were monitored during the EC process. The electrodes made of aluminium appeared to be the most effective in the chromium removal from the wastewater under study. At pH equal to 4.52 and at 28°C, the optimal conditions of Cr3+ removal using the EC process were found, as follows: the initial Cr3+ concentration=3,596 mg/L, the electrode gap=0.5 cm, the stirring velocity=382.3 rpm, and the current density=57.87 mA/cm2. At those conditions, it was possible to reach 99.76% of Cr3+ removal, and 64% and 61% of mineralisation (TOC) and COD removal, respectively. A kinetic analysis was performed in order to verify the response capacity of the EC process at optimised parameter values.

Statistical medium optimization of an alkaline protease from Pseudomonas aeruginosa MTCC 10501, its characterization and application in leather processing.

PubMed

Boopathy, Naidu Ramachandra; Indhuja, Devadas; Srinivasan, Krishnan; Uthirappan, Mani; Gupta, Rishikesh; Ramudu, Kamini Numbi; Chellan, Rose

2013-04-01

Proteases are shown to have greener mode of application in leather processing for dehairing of goat skins and cow hides. Production of protease by submerged fermentation with potent activity is reported using a new isolate P. aeruginosa MTCC 10501. The production parameters were optimized by statistical methods such as Plackett-Burman and response surface methodology. The optimized production medium contained (g/L); tryptone, 2.5; yeast extract, 3.0; skim milk 30.0; dextrose 1.0; inoculum concentration 4%: initial pH 6.0; incubation temperature 30 degrees C and optimum production at 48 h with protease activity of 7.6 U/mL. The protease had the following characteristics: pH optima, 9.0; temperature optima 50 degrees C; pH stability between 5.0-10.0 and temperature stability between 10-40 degrees C. The protease was observed to have high potential for dehairing of goat skins in the pre- tanning process comparable to that of the chemical process as evidenced by histology. The method offers cleaner processing using enzyme only instead of toxic chemicals in the pre-tanning process of leather manufacture.

Continuity and Change in India’s Foreign Policy: The Next Five Years,

DTIC Science & Technology

1984-01-01

mainly of food products (tea, coffee, rice, cashews , pepper), tobacco, leather goods, cotton textiles, jute products, light engineering goods, and...industrial fasteners ( nuts and bolts), for example, have drawn strong Indian protests, and the protectionist mood in the United States, as reflected in

Physical properties of collagen fibrous networks derived from bovine hides

USDA-ARS?s Scientific Manuscript database

The hides and leather industry has been facing a serious challenge in the disposal of solid wastes such as trimmings and lime-splits. One strategy to solve this problem is to convert these wastes into useful fibrous products and green composites. Therefore research is needed to investigate the pre...

Modified silica sol coatings for surface enhancement of leather.

PubMed

Mahltig, Boris; Vossebein, Lutz; Ehrmann, Andrea; Cheval, Nicolas; Fahmi, Amir

2012-06-01

The presented study reports on differently modified silica sols for coating applications on leather. Silica sols are prepared by acidic hydrolysis of tetraethoxysilane and modified by silane compounds with fluorinated and non-fluorinated alkylgroups. In contrast to many earlier investigations regarding sol-gel applications on leather, no acrylic resin is used together with the silica sols when applying on leather. The modified silica particles are supposed to aggregate after application, forming thus a modified silica coating on the leather substrate. Scanning electron microscopy investigation shows that the applied silica coatings do not fill up or close the pores of the leather substrate. However, even if the pores of the leather are not sealed by this sol-gel coating, an improvement of the water repellent and oil repellent properties of the leather substrates are observed. These improved properties of leather by application of modified silica sols can provide the opportunity to develop sol-gel products for leather materials present in daily life.

Collagen based magnetic nanocomposites for oil removal applications

PubMed Central

Thanikaivelan, Palanisamy; Narayanan, Narayanan T.; Pradhan, Bhabendra K.; Ajayan, Pulickel M.

2012-01-01

A stable magnetic nanocomposite of collagen and superparamagnetic iron oxide nanoparticles (SPIONs) is prepared by a simple process utilizing protein wastes from leather industry. Molecular interaction between helical collagen fibers and spherical SPIONs is proven through calorimetric, microscopic and spectroscopic techniques. This nanocomposite exhibited selective oil absorption and magnetic tracking ability, allowing it to be used in oil removal applications. The environmental sustainability of the oil adsorbed nanobiocomposite is also demonstrated here through its conversion into a bi-functional graphitic nanocarbon material via heat treatment. The approach highlights new avenues for converting bio-wastes into useful nanomaterials in scalable and inexpensive ways. PMID:22355744

Activated carbons from waste of oil-palm kernel shells, sawdust and tannery leather scraps and application to chromium(VI), phenol, and methylene blue dye adsorption.

PubMed

Montoya-Suarez, Sergio; Colpas-Castillo, Fredy; Meza-Fuentes, Edgardo; Rodríguez-Ruiz, Johana; Fernandez-Maestre, Roberto

2016-01-01

Phenol, chromium, and dyes are continuously dumped into water bodies; the adsorption of these contaminants on activated carbon is a low-cost alternative for water remediation. We synthesized activated carbons from industrial waste of palm oil seed husks (kernel shells), sawdust, and tannery leather scraps. These materials were heated for 24 h at 600, 700 or 800°C, activated at 900°C with CO2 and characterized by proximate analysis and measurement of specific surface area (Brunauer-Emmett-Teller (BET) and Langmuir), and microporosity (t-plot). Isotherms showed micropores and mesopores in activated carbons. Palm seed activated carbon showed the highest fixed carbon content (96%), and Langmuir specific surface areas up to 1,268 m2/g, higher than those from sawdust (581 m2/g) and leather scraps (400 m2/g). The carbons were applied to adsorption of Cr(VI), phenol, and methylene blue dye from aqueous solutions. Phenol adsorption on activated carbons was 78-82 mg/g; on palm seed activated carbons, Cr(VI) adsorption at pH 7 was 0.35-0.37 mg/g, and methylene blue adsorption was 40-110 mg/g, higher than those from sawdust and leather scraps. Activated carbons from palm seed are promising materials to remove contaminants from the environment and represent an alternative application for vegetal wastes instead of dumping into landfills.

Recycling of Chrome Tanned Leather Dust in Acrylonitrile Butadiene Rubber

NASA Astrophysics Data System (ADS)

El-Sabbagh, Salwa H.; Mohamed, Ola A.

2010-06-01

Concerns on environmental waste problem caused by chrome tanned leather wastes in huge amount have caused an increasing interest in developing this wastes in many composite formation. This leather dust was used as filler in acrylonitrile butadiene rubber (NBR) before treatment and after treatment with ammonia solution and sod. formate. Different formulations of NBR/ leather dust (untreated-treated with ammonia solution—treated with sod. formate) composites are prepared. The formed composite exhibit a considerable improvement in some of their properties such as rheometric characteristics especially with composites loaded with treated leather dust. Tensile strength, modulus at 100% elongation, hardness and youngs modulus were improved then by further loading start to be steady or decrease. Cross linking density in toluene were increased by incorporation of leather dust treated or untreated resulting in decreases in equilibrium swelling. Distinct increase in the ageing coefficient of both treated and untreated leather with drop in NBR vulcanizates without leather dust. Addition of leather dust treated or untreated exhibit better thermal stability.

76 FR 24522 - In the Matter of Certain Handbags, Luggage, Accessories, and Packaging Thereof; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

..., 2011). The complainant named as respondents T&T Handbag Industrial Co., Ltd. of Guangzhou, China; Sanjiu Leather Co., Ltd. of Guangzhou, China; Meada Corporation (d/b/a/ Diophy Internation) of El Monte... Arcadia, California (``Alice B. Wang''); Trendy Creations, Inc. of Chatsworth, California; The Inspired...

Effects of dehydration methods on characteristics of fibrous networks from un-tanned hides

USDA-ARS?s Scientific Manuscript database

To improve prospective markets and to secure a viable future for the hides and leather industries, it is important to develop new uses and novel biobased products from hides. We hypothesize collagen fiber networks derived from un-tanned hides can be utilized to prepare high performance green compos...

Effects of dehydration methods on the characteristics of fibrous networks from un-tanned hides

USDA-ARS?s Scientific Manuscript database

To improve prospective markets and to secure a viable future for the hides and leather industries, it is important to develop new uses and novel biobased products from hides. We hypothesize collagen fiber networks derived from un-tanned hides can be utilized to prepare high performance green compos...

40 CFR 63.5325 - What is a plan for demonstrating compliance and when must I have one in place?

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Leather... measurement methods such as weigh scales and volumetric displacement. Because the industry does not have a...

Spectroscopic Characterization and Nanosafety of Ag-Modified Antibacterial Leather and Leatherette.

PubMed

Sportelli, Maria Chiara; Picca, Rosaria Anna; Paladini, Federica; Mangone, Annarosa; Giannossa, Lorena Carla; Franco, Cinzia Di; Gallo, Anna Lucia; Valentini, Antonio; Sannino, Alessandro; Pollini, Mauro; Cioffi, Nicola

2017-07-29

The development of antibacterial coatings is of great interest from both industry and the consumer's point of view. In this study, we characterized tanned leather and polyurethane leatherette, typically employed in the automotive and footwear industries, which were modified by photo-deposition of antibacterial silver nanoparticles (AgNPs). Material surface chemical composition was investigated in detail by X-ray photoelectron spectroscopy (XPS). The material's antibacterial capability was checked against Escherichia coli and Staphylococcus aureus , as representative microorganisms in cross transmissions. Due to the presence of silver in a nanostructured form, nanosafety issues were considered, as well. Ionic release in contact media, as well as whole nanoparticle release from treated materials, were quantitatively evaluated, thus providing specific information on potential product nanotoxicity, which was further investigated through cytocompatibility MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assays, also after surface abrasion of the materials. The proved negligible nanoparticle release, as well as the controlled release of antibacterial ions, shed light on the materials' potentialities, in terms of both high activity and safety.

Impact of aerobic stabilization on the characteristics of treatment sludge in the leather tanning industry.

PubMed

Cokgor, Emine Ubay; Aydinli, Ebru; Tas, Didem Okutman; Zengin, Gulsum Emel; Orhon, Derin

2014-01-01

The efficiency of aerobic stabilization on the treatment sludge generated from the leather industry was investigated to meet the expected characteristics and conditions of sludge prior to landfill. The sludge types subjected to aerobic stabilization were chemical treatment sludge, biological excess sludge, and the mixture of both chemical and biological sludges. At the end of 23 days of stabilization, suspended solids, volatile suspended solids and total organic carbon removal efficiencies were determined as 17%, 19% and 23% for biological sludge 31%, 35% and 54% for chemical sludge, and 32%, 34% and 63% for the mixture of both chemical and biological sludges, respectively. Model simulations of the respirometric oxygen uptake rate measurements showed that the ratio of active biomass remained the same at the end of the stabilization for all the sludge samples. Although mixing the chemical and biological sludges resulted in a relatively effective organic carbon and solids removal, the level of stabilization achieved remained clearly below the required level of organic carbon content for landfill. These findings indicate the potential risk of setting numerical restrictions without referring to proper scientific support.

Spectroscopic Characterization and Nanosafety of Ag-Modified Antibacterial Leather and Leatherette

PubMed Central

Mangone, Annarosa; Di Franco, Cinzia; Gallo, Anna Lucia; Valentini, Antonio; Sannino, Alessandro

2017-01-01

The development of antibacterial coatings is of great interest from both industry and the consumer’s point of view. In this study, we characterized tanned leather and polyurethane leatherette, typically employed in the automotive and footwear industries, which were modified by photo-deposition of antibacterial silver nanoparticles (AgNPs). Material surface chemical composition was investigated in detail by X-ray photoelectron spectroscopy (XPS). The material’s antibacterial capability was checked against Escherichia coli and Staphylococcus aureus, as representative microorganisms in cross transmissions. Due to the presence of silver in a nanostructured form, nanosafety issues were considered, as well. Ionic release in contact media, as well as whole nanoparticle release from treated materials, were quantitatively evaluated, thus providing specific information on potential product nanotoxicity, which was further investigated through cytocompatibility MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assays, also after surface abrasion of the materials. The proved negligible nanoparticle release, as well as the controlled release of antibacterial ions, shed light on the materials’ potentialities, in terms of both high activity and safety. PMID:28758912

ENVIRONMENTALLY FRIENDLY LEATHER TANNING USING ENZYMES

EPA Science Inventory

The effectiveness of the leather tanning will be evaluated by measuring shrinkage temperature, and analyzing leather structure using Scan Electron Microscope (SEM). The team will also measure leather physical/mechanical properties, including softness, tensile strength, elon...

Cancer incidence in the Swedish leather tanning industry: updated findings 1958–99

PubMed Central

Mikoczy, Z; Hagmar, L

2005-01-01

Aims: To assess how a 10 year extension of the follow up period affected cancer incidence in the Swedish leather tanning cohort. Methods: A cohort of 2027 tannery workers (of which 482 were women) who had been employed for at least one year between 1900 and 1989 at one of three Swedish leather tanneries, was established. The start of observation varied between 1958 and 1966 for the three plants. Through linkage with the Swedish Cancer Registry, incident cancer cases were recorded up to 1999. Cause specific expected cancer incidence was calculated for 1958–99 based on calendar year, sex, and five year age group specific incidence rates for the counties where the plants had been located. Altogether 56 022 person-years at risk were generated. Results: A total of 351 incident cancer cases were observed compared to 302 expected, which resulted in an increased standardised incidence ratio (SIR) of 1.16 (95% CI 1.04 to 1.29). An enhanced risk for prostate cancer was observed (SIR 1.44, 95% CI 1.10 to 1.86), mainly attributable to the later part of the observation period (1990–99). In this updated analysis the previously observed risk excess for soft tissue sarcomas was no longer significant (SIR 2.62, 95% CI 0.96 to 5.70). For multiple myelomas and sinonasal cancer the slight non-significant excesses remained, still based on very few cases. Conclusions: The increased risk for prostate cancer in the present study might be a chance finding, but is noteworthy, since it is in acccordance with the finding of increased SIR for prostate cancer among leather workers in another recent Swedish study. Moreover, excess risks for prostate cancer among farmers have been reported, indicating pesticides as possible causative agents. Leather tanners have also been exposed to pesticides. PMID:15961622

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rajamani, S.

The leather industry is an important export-oriented industry in India, with more than 3,000 tanneries located in different clusters. Sodium sulfide, a toxic chemical, is used in large quantities to remove hair and excess flesh from hides and skins. Most of the sodium sulfide used in the process is discharged as waste in the effluent, which causes serious environmental problems. Reduction of sulfide in the effluent is generally achieved by means of chemicals in the pretreatment system, which involves aerobic mixing using large amounts of chemicals and high energy, and generating large volumes of sludge. A simple biotechnological system thatmore » uses the residual biosludge from the secondary settling tank was developed, and the commercial-scale application established that more than 90% of the sulfide could be reduced in the primary treatment system. In addition to the reduction of sulfide, foul smells, BOD and COD are reduced to a considerable level. 3 refs., 2 figs., 1 tab.« less

Bladder cancer and occupational exposure to leather.

PubMed Central

Marrett, L D; Hartge, P; Meigs, J W

1986-01-01

A large case-control study of bladder cancer (2982 cases; 5782 controls) included information about occupational exposure to leather. Occupational histories of exposed white study subjects were reviewed and 150 were determined to have had "true" on the job exposure to leather. The odds ratio estimate (OR) of bladder cancer associated with such exposure in white subjects (n = 8063) was 1.4 (95% confidence limits = 1.0, 1.9) after adjustment for sex, age, and cigarette smoking. The risk was highest in those first employed in a leather job before 1945, although no dose-response relation with duration of leather employment was found. Subjects employed in "dusty" leather jobs had a slightly higher risk than those with other types of leather jobs. Our results are consistent with reports of an increased risk of bladder cancer associated with exposure to leather. Although the agents responsible have not been identified, our findings of an increased risk associated with exposure in the earlier years of this century and in dusty jobs suggest that leather dusts may be important. PMID:3947575

Consumer leather exposure: an unrecognized cause of cobalt sensitization.

PubMed

Thyssen, Jacob P; Johansen, Jeanne D; Jellesen, Morten S; Møller, Per; Sloth, Jens J; Zachariae, Claus; Menné, Torkil

2013-11-01

A patient who had suffered from persistent generalized dermatitis for 7 years was diagnosed with cobalt sensitization, and his leather couch was suspected as the culprit, owing to the clinical presentation mimicking allergic chromium dermatitis resulting from leather furniture exposure. The cobalt spot test, X-ray fluorescence, inductively coupled plasma mass spectrometry and scanning electron microscopy were used to determine cobalt content and release from the leather couch that caused the dermatitis and from 14 randomly collected samples of furniture leather. The sample from the patient's leather couch, but none of the 14 random leather samples, released cobalt in high concentrations. Dermatitis cleared when the patient stopped using his couch. Cobalt is used in the so-called pre-metallized dyeing of leather products. Repeated studies have found high levels of cobalt sensitization, but not nickel sensitization, in patients with foot dermatitis. We raise the possibility that cobalt may be widely released from leather items, and advise dermatologists to consider this in patients with positive cobalt patch test reactions. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Determination of heavy metal toxicity of finished leather solid waste.

PubMed

Aslan, Ahmet

2009-05-01

This paper investigates the toxicity in leather products of heavy metals known to be detrimental to the ecosystem. Heavy metal concentrations in leather samples were identified with ICP-OES, and toxicity was determined using a MetPLATE bioassay. Chromium and aluminium were found to constitute 98% of the total concentration of heavy metals in finished leather tanned with chromium and aluminium salts, while in some vegetable-tanned leather, zirconium was the only heavy metal identified. The average inhibition values for chromium, aluminium and vegetable tanned leather were 98.08%, 97.04% and 62.36%, respectively.

Synthesis and characterization of black ceramic pigments by recycling of two hazardous wastes

NASA Astrophysics Data System (ADS)

Du, Minxing; Du, Yi; Chen, Zhongtao; Li, Zhongfu; Yang, Kai; Lv, Xingjie; Feng, Yibing

2017-09-01

In this study, two different industrial wastes, namely vanadium tailing and leather sludge, were used as less expensive alternative raw materials for the synthesis of black ceramic pigments to be used in commercial glazes. The pigments were based on hematite structure (FexCr1-x)2O3 and prepared by the common solid-state reaction method, under optimal formulation and processing conditions. The synthesized pigments were characterized in typical ceramic glazes and ceramic tile bodies. Optimal color development was achieved when the Fe/Cr mole ratios were 2.0 with 40 wt% content of vanadium tailing at 1200 °C. The coloring properties were similar to those imparted by a commercial black pigment.

Chromium recovery from exhausted baths generated in plating processes and its reuse in the tanning industry.

PubMed

Torras, Josep; Buj, Irene; Rovira, Miquel; de Pablo, Joan

2012-03-30

Chromium plating used for functional purposes provides an extremely hard, wear and corrosion resistant layer by means of electrolytic deposition. Typical layer thicknesses range between 2.5 and 500 μm. Chromium electroplating baths contain high concentrations of Cr(VI) with chromium trioxide (CrO(3)) as the chromium source. When because of technical or economic reasons a bath gets exhausted, a waste containing mainly chromium as dichromate as well as other heavy metals is generated. Chromium may then be purified for use in other industrial processes with different requirements. In this work, a sustainable system for using galvanic wastes as reagents in the leather tanning industry, thus reducing quantity of wastes to be treated, is presented. Metal cations present in the chromium exhausted bath were precipitated with NaOH. Then, the solution containing mainly soluble Cr(VI) was separated. By means of sodium sulphite in acidic conditions, Cr(VI) was reduced to Cr(III) as chromium (III) sulphate. From chromium (III) sulphate a basic Cr(III) sulphate may be obtained, which is one of most used compounds in the tanning industry. Cr(III) concentration in the final solution allows its reuse without concentration, but with a slight dilution. Copyright © 2012 Elsevier B.V. All rights reserved.

Complex Mixture-Associated Hormesis and Toxicity: The Case of Leather Tanning Industry

PubMed Central

Pagano, Giovanni; Castello, Giuseppe; Gallo, Marialuisa; Borriello, Ilaria; Guida, Marco

2008-01-01

A series of studies investigated the toxicities of tannery-derived complex mixtures, i.e. vegetable tannin (VT) from Acacia sp. or phenol-based synthetic tannin (ST), and waste-water from tannin-based vs. chromium-based tanneries. Toxicity was evaluated by multiple bioassays including developmental defects and loss of fertilization rate in sea urchin embryos and sperm (Paracentrotus lividus and Sphaerechinus granularis), and algal growth inhibition (Dunaliella tertiolecta and Selenastrum capricornutum). Both VT and ST water extracts resulted in hormetic effects at concentrations ranging 0.1 to 0.3%, and toxicity at levels ≥1%, both in sea urchin embryo and sperm, and in algal growth bioassays. When comparing tannin-based tannery wastewater (TTW) vs. chromium-based tannery effluent (CTE), a hormesis to toxicity trend was observed for TTW both in terms of developmental and fertilization toxicity in sea urchins, and in algal growth inhibition, with hormetic effects at 0.1 to 0.2% TTW, and toxicity at TTW levels ≥1%. Unlike TTW, CTE showed a monotonic toxicity increase from the lowest tested level (0.1%) and CTE toxicity at higher levels was significantly more severe than TTW-induced toxicity. The results support the view that leather production utilizing tannins might be regarded as a more environmentally friendly procedure than chromium-based tanning process. PMID:19088903

Complex mixture-associated hormesis and toxicity: the case of leather tanning industry.

PubMed

Pagano, Giovanni; Castello, Giuseppe; Gallo, Marialuisa; Borriello, Ilaria; Guida, Marco

2008-01-01

A series of studies investigated the toxicities of tannery-derived complex mixtures, i.e. vegetable tannin (VT) from Acacia sp. or phenol-based synthetic tannin (ST), and waste-water from tannin-based vs. chromium-based tanneries. Toxicity was evaluated by multiple bioassays including developmental defects and loss of fertilization rate in sea urchin embryos and sperm (Paracentrotus lividus and Sphaerechinus granularis), and algal growth inhibition (Dunaliella tertiolecta and Selenastrum capricornutum). Both VT and ST water extracts resulted in hormetic effects at concentrations ranging 0.1 to 0.3%, and toxicity at levels > or =1%, both in sea urchin embryo and sperm, and in algal growth bioassays. When comparing tannin-based tannery wastewater (TTW) vs. chromium-based tannery effluent (CTE), a hormesis to toxicity trend was observed for TTW both in terms of developmental and fertilization toxicity in sea urchins, and in algal growth inhibition, with hormetic effects at 0.1 to 0.2% TTW, and toxicity at TTW levels > or =1%. Unlike TTW, CTE showed a monotonic toxicity increase from the lowest tested level (0.1%) and CTE toxicity at higher levels was significantly more severe than TTW-induced toxicity. The results support the view that leather production utilizing tannins might be regarded as a more environmentally friendly procedure than chromium-based tanning process.

Performance Characteristics and Accuracy in Perceptual Discrimination of Leather and Synthetic Basketballs.

ERIC Educational Resources Information Center

Mathes, Sharon; Flatten, Kay

1982-01-01

To assess the performance characteristics of synthetic and leather basketballs, individuals were asked to discriminate perceptually between the leather and synthetic basketballs under four treatment conditions. Rebound characteristics on five playing surfaces were measured. Leather basketballs rebounded significantly higher; no significant…

Evaluation of aquifer environment under Hazaribagh leather processing zone of Dhaka city

NASA Astrophysics Data System (ADS)

Zahid, Anwar; Balke, K.-D.; Hassan, M. Qumrul; Flegr, Matthias

2006-07-01

Hazaribagh is a densely populated area of Dhaka city where about 185 leather processing industries have been operating and discharging solid and liquid wastes directly to the low-lying areas, river and natural canals without proper treatment. The area is covered by alluvial deposits of Holocene age and is underlain by Pleistocene Madhupur clay. The Dupi Tila Formation of Mio-Pliocene age underlain by this yellowish gray to brick red clay bed serves as the main water-bearing aquifer of Dhaka city. To assess the environmental degradation as well as the groundwater environment, major anions, cations and heavy metals of water samples, heavy metals and organic carbon content of sediment samples were analyzed in this study. Analyses of tannery effluent detect high concentration of Na+, Mg2+, Cl- and SO{4/2-} followed by Ca2+, NH{4/+} and K+ with remarkable contents of some trace elements, mainly Cr, Fe, Mn, S, Ni and Pb. Higher accumulations of Cr, Al and Fe are observed in topsoil samples with significant amounts of Mn, Zn, Ni and Cu. Concentrations of ions and all the investigated trace elements of sampled groundwater were within the maximum allowable limit for drinking water of the Department of Environment, Bangladesh (DoE), and World Health Organization (WHO). However, excessive concentrations of Cr, Pb, etc., have already been reported in the shallow groundwater (10-20 m) of the area. Due to excessive withdrawal the vulnerability of groundwater contamination in deeper parts cannot be avoided for the future.

Preparation and evaluation of biocomposites as wound dressing material.

PubMed

Ramnath, V; Sekar, S; Sankar, S; Sankaranarayanan, C; Sastry, T P

2012-12-01

Collagen was isolated from the chrome containing leather waste (CCLW) which is a major solid waste in leather industry. Composite films were made using sago starch (SG), soya protein (SY), and collagen (C) and were cross linked with glutaraldehyde (G).The films prepared were characterized for their physico chemical properties like tensile strength, infrared spectra, thermogravimetric analysis, surface morphology, and water absorption studies. Better mechanical properties and surface morphology were observed for SG-SY-G-C films compared to other films prepared using collagen. The composite films prepared were used as wound dressing material on the experimental wounds of rats and healing pattern was evaluated using planimetric, biochemical, and histopathological studies. These studies have revealed better wound healing capacity of SG-SY-G-C film and utilization of CCLW in the preparation of value added product like wound dressing material.

Microbial keratinases: industrial enzymes with waste management potential.

PubMed

Verma, Amit; Singh, Hukum; Anwar, Shahbaz; Chattopadhyay, Anirudha; Tiwari, Kapil K; Kaur, Surinder; Dhilon, Gurpreet Singh

2017-06-01

Proteases are ubiquitous enzymes that occur in various biological systems ranging from microorganisms to higher organisms. Microbial proteases are largely utilized in various established industrial processes. Despite their numerous industrial applications, they are not efficient in hydrolysis of recalcitrant, protein-rich keratinous wastes which result in environmental pollution and health hazards. This paved the way for the search of keratinolytic microorganisms having the ability to hydrolyze "hard to degrade" keratinous wastes. This new class of proteases is known as "keratinases". Due to their specificity, keratinases have an advantage over normal proteases and have replaced them in many industrial applications, such as nematicidal agents, nitrogenous fertilizer production from keratinous waste, animal feed and biofuel production. Keratinases have also replaced the normal proteases in the leather industry and detergent additive application due to their better performance. They have also been proved efficient in prion protein degradation. Above all, one of the major hurdles of enzyme industrial applications (cost effective production) can be achieved by using keratinous waste biomass, such as chicken feathers and hairs as fermentation substrate. Use of these low cost waste materials serves dual purposes: to reduce the fermentation cost for enzyme production as well as reducing the environmental waste load. The advent of keratinases has given new direction for waste management with industrial applications giving rise to green technology for sustainable development.

Mechanical properties and area retention of leather dried with biaxial stretching under vacuum

USDA-ARS?s Scientific Manuscript database

The conversion of animal hides to leather involves many complicated chemical and mechanical operations. Drying is one of the mechanical operations, and plays a key role in determining the physical properties of leather. It is where leather acquires its final texture, consistency and flexibility. ...

40 CFR 63.5290 - What parts of my facility does this subpart cover?

Code of Federal Regulations, 2010 CFR

2010-07-01

... collocated with leather tanning operations: (1) Upholstery leather with greater than or equal to 4 grams... (c)(1) and (2) of this section: (1) Equipment used solely with leather tanning operations; and (2... CATEGORIES National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations What...

A study on the dewatering of industrial waste sludge by fry-drying technology.

PubMed

Ohm, Tae-In; Chae, Jong-Seong; Kim, Jeong-Eun; Kim, Hee-Kyum; Moon, Seung-Hyun

2009-08-30

In sludge treatment, drying sludge using typical technology with high water content to a water content of approximately 10% is always difficult because of adhesive characteristics of sludge. Many methods have been applied, including direct and indirect heat drying, but these approaches of reducing water content to below 40% after drying is very inefficient in energy utilization of drying sludge. In this study, fry-drying technology with a high heat transfer coefficient of approximately 500 W/m(2) degrees C was used to dry industrial wastewater sludge. Also waste oil was used in the fry-drying process, and because the oil's boiling point is between 240 and 340 degrees C and the specific heat is approximately 60% of that of water. In the fry-drying system, the sludge is input by molding it into a designated form after heating the waste oil at temperatures between 120 and 170 degrees C. At these temperatures, the heated oil rapidly evaporates the water contained in the sludge, leaving the oil itself. After approximately 10 min, the water content of the sludge was less than 10%, and its heating value surpassed 5300 kcal/kg. Indeed, this makes the organic sludge appropriate for use as a solid fuel. The wastewater sludge used in this study was the designated waste discharged from chemical, leather and plating plants. These samples varied in characteristics, especially with regard to heavy metal concentration. After drying the three kinds of wastewater sludge at oil temperatures 160 degrees C for 10 min, it was found that the water content in the sludge from the chemical, leather, and plating plants reduced from 80.0 to 5.5%, 81.6 to 1.0%, and 65.4 to 0.8%, respectively. Furthermore, the heat values of the sludge from the chemical, leather, and plating plants prior to fry-drying were 217, 264, and 428 kcal/kg, respectively. After drying, these values of sludge increased to 5317, 5983 and 6031 kcal/kg, respectively. The heavy metals detected in the sludge after drying were aluminum, lead, zinc, mercury, and cadmium. Most importantly, if the dried sludge is used as a solid fuel, these heavy metals can be collected from the dust collector after combustion.

West Europe Report.

DTIC Science & Technology

1987-02-18

linguistic disasters. They are devoid of meaning, grammar, concept, reason and fluency . However, the journal that we are reading now is far ahead of...1984 list but were included in the 1985 list: Meric Textile, Sivas Cement , Nigde Cement , Ege Metal, Istanbul Piston Ring Casings, Denizli Printed...Textile, Gimsan, Teknik Rubber, Ipsan Textile, Turk Cement , Bozuyuk Ceramic, Kampana Leather and Shoesoles Industry, Vestel, Turkish Shipbuilding

Microbiological and near IR studies of leather from hides presoaked in formulations that can remove hardened bovine manure

USDA-ARS?s Scientific Manuscript database

The standard soaking solution that the industry has been using in cleaning dirty hides is usually composed of a high concentration of antibiotic and surfactant. It is observed to be good in eliminating the microbial contamination (~99.9%) presented on the hides but is not as efficient in removing th...

Electrocoagulation efficiency of the tannery effluent treatment using aluminium electrodes.

PubMed

Espinoza-Quiñones, Fernando R; Fornari, Marilda M T; Módenes, Aparecido N; Palácio, Soraya M; Trigueros, Daniela E G; Borba, Fernando H; Kroumov, Alexander D

2009-01-01

An electro-coagulation laboratory scale system using aluminium plates electrodes was studied for the removal of organic and inorganic pollutants as a by-product from leather finishing industrial process. A fractional factorial 2(3) experimental design was applied in order to obtain optimal values of the system state variables. The electro-coagulation (EC) process efficiency was based on the chemical oxygen demand (COD), turbidity, total suspended solid, total fixed solid, total volatile solid, and chemical element concentration values. Analysis of variance (ANOVA) for final pH, total fixed solid (TFS), turbidity and Ca concentration have confirmed the predicted models by the experimental design within a 95% confidence level. The reactor working conditions close to real effluent pH (7.6) and electrolysis time in the range 30-45 min were enough to achieve the cost effective reduction factors of organic and inorganic pollutants' concentrations. An appreciable improvement in COD removal efficiency was obtained for electro-coagulation treatment. Finally, the technical-economical analysis results have clearly shown that the electro-coagulation method is very promising for industrial application.

Effects of alpha-tocopherol addition to polymeric coatings on the UV and heat resistance of a fibrous collagen material--chrome-free leather

USDA-ARS?s Scientific Manuscript database

UV and heat resistance are very important qualities of leather because most leather products are constantly exposed to outdoor environments. In recent years, we have focused on using environmentally friendly antioxidants that will improve the UV and heat resistance of chrome-free leather. Tocopher...

Preparation of highly-oxidized starch using hydrogen peroxide and its application as a novel ligand for zirconium tanning of leather.

PubMed

Yu, Yue; Wang, Ya-Nan; Ding, Wei; Zhou, Jianfei; Shi, Bi

2017-10-15

A series of highly-oxidized starch (HOS) were prepared using H 2 O 2 and a copper-iron catalyst as a desired ligand for zirconium tanning of leather. The effects of catalyst and H 2 O 2 dosages, and reaction temperature on the oxidation degree (OD, represented as the amount of carbonyl and carboxyl groups derived) of starch were investigated. The OD reached 76.2% when oxidation was conducted using 60% H 2 O 2 and 0.015% catalyst at 98°C for 2h. 13 C NMR and FT-IR illustrated carbonyl and carboxyl groups were formed in HOS after oxidation. GPC and laser particle size analyses indicated the decrease of HOS molecular size with increasing H 2 O 2 dosage and OD. HOS with moderate OD and molecular weight was able to coordinate with zirconium and remarkably improve tanning process. Leather tanned by Zr complexes using HOS-60 (60% H 2 O 2 , Mn 3516g/mol) as ligand presented considerably better physical and organoleptic properties than those of traditional Zr-tanned leather. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors in the sociocultural environment of child labourers: a study in a small scale leather goods industry in Calcutta.

PubMed

Mitra, S

1994-12-01

During a study of the occupational health of the child workers in several small leather workshops, investigations were also made of the sociocultural factors that made it necessary for the children, aged between 7 and 14 years, to work. The psychosocial effects of the same factors were also investigated. Personal interviews were carried out with a prepared questionaire, and the findings were compared between the working children and a control group of the same number of non-working children from the neighbourhood, matched for age, sex, and religion. It was found that the foremost cause of taking up employment by the children was poverty. The overall effects found were deprivation of education and lowering of aspirations, that indicated a blunting of mental faculties. Prolonged, monotonous work in childhood that precludes education and healthy recreation, is harmful to the children.

Chromium(III) release from chromium-tanned leather elicits allergic contact dermatitis: a use test study.

PubMed

Hedberg, Yolanda S; Erfani, Behnaz; Matura, Mihály; Lidén, Carola

2018-05-01

Chromium (Cr) is a common skin sensitizer. The use of Cr(VI) in leather is restricted in the EU, but that of Cr(III) is not. To assess whether prolonged exposure to Cr-tanned leather with mainly Cr(III) release may elicit allergic contact dermatitis in Cr-allergic individuals. Ten Cr-allergic subjects and 22 controls were patch tested with serial dilutions of Cr(III) and Cr(VI), and with leather samples. They then conducted a use test with a Cr-tanned and a Cr-free leather bracelet over a period of 3 weeks, for 12 h per day. Cr deposited on the skin from the bracelets was measured in the controls, and the diphenylcarbazide test for Cr(VI) and extraction tests for Cr(III) and Cr(VI) were conducted for the different leathers. Four of 10 Cr-allergic subjects developed positive reactions to the Cr-tanned bracelet within 7-21 days, whereas only 1 of 10 had a positive patch test reaction to this leather. Cr released from the Cr-tanned leather was most probably entirely Cr(III), with a quantifiable amount being deposited on the skin. This study strongly suggests that prolonged and repeated exposure to Cr-tanned leather with mainly Cr(III) release is capable of eliciting allergic contact dermatitis in Cr-allergic individuals. © 2018 The Authors. Contact Dermatitis published by John Wiley & Sons Ltd.

Chromium(III) release from chromium‐tanned leather elicits allergic contact dermatitis: a use test study

PubMed Central

Erfani, Behnaz; Matura, Mihály; Lidén, Carola

2018-01-01

Summary Background Chromium (Cr) is a common skin sensitizer. The use of Cr(VI) in leather is restricted in the EU, but that of Cr(III) is not. Objectives To assess whether prolonged exposure to Cr‐tanned leather with mainly Cr(III) release may elicit allergic contact dermatitis in Cr‐allergic individuals. Method Ten Cr‐allergic subjects and 22 controls were patch tested with serial dilutions of Cr(III) and Cr(VI), and with leather samples. They then conducted a use test with a Cr‐tanned and a Cr‐free leather bracelet over a period of 3 weeks, for 12 h per day. Cr deposited on the skin from the bracelets was measured in the controls, and the diphenylcarbazide test for Cr(VI) and extraction tests for Cr(III) and Cr(VI) were conducted for the different leathers. Results Four of 10 Cr‐allergic subjects developed positive reactions to the Cr‐tanned bracelet within 7–21 days, whereas only 1 of 10 had a positive patch test reaction to this leather. Cr released from the Cr‐tanned leather was most probably entirely Cr(III), with a quantifiable amount being deposited on the skin. Conclusions This study strongly suggests that prolonged and repeated exposure to Cr‐tanned leather with mainly Cr(III) release is capable of eliciting allergic contact dermatitis in Cr‐allergic individuals. PMID:29322530

Histological differences of skin among three body regions in male and female Hokkaido sika deer (Cervus nippon yesoensis).

PubMed

Minaguchi, Jun A; Abe, Ayako; Ueda, Hiromi; Tangkawattana, Prasarn; Takehana, Kazushige

2012-01-01

The Hokkaido sika deer (Cervus Nippon yesoensis), the largest and most abundant of the sika deer subspecies in Japan, has recently attracted new attention as a target for leather production, in addition to its meat value. To provide fundamental data for facilitating the effective use of skin for leather, the histological properties of skin at the shoulder, back and abdominal regions of male and female deer were compared. The results showed that the thickness of the outer skin layer was not significantly different across all regions irrespective of sex. Regarding collagen composition, we found that large-diameter collagen fibrils were heavily distributed in the shoulder of male deer, whereas small-diameter collagen fibrils were largely confined to the abdomen of female deer. We hope this regional histological data will lead to more efficient processing of Hokkaido sika deer skin for leather production.

Molecular spectroscopic study for suggested mechanism of chrome tanned leather

NASA Astrophysics Data System (ADS)

Nashy, Elshahat H. A.; Osman, Osama; Mahmoud, Abdel Aziz; Ibrahim, Medhat

2012-03-01

Collagen represents the structural protein of the extracellular matrix, which gives strength of hides and/or skin under tanning process. Chrome tan is the most important tanning agent all over the world. The methods for production of leather evolved over several centuries as art and engineering with little understanding of the underlying science. The present work is devoted to suggest the most probable mechanistic action of chrome tan on hide proteins. First the affect of Cr upon hide protein is indicated by the studied mechanical properties. Then the spectroscopic characterization of the hide protein as well as chrome tanned leather was carried out with Horizontal Attenuated Total Reflection (HATR) FT-IR. The obtained results indicate how the chromium can attached with the active sites of collagen. Molecular modeling confirms that chromium can react with amino as well as carboxylate groups. Four schemes were obtained to describe the possible interactions of chrome tan with hide proteins.

Basic forensic identification of artificial leather for hit-and-run cases.

PubMed

Sano, Tetsuya; Suzuki, Shinichi

2009-11-20

Single fibers retrieved from a victim's garments and adhered to the suspect's automobile have frequently been used to prove the relationship between victim and suspect's automobile. Identification method for single fiber discrimination has already been conducted. But, a case was encountered requiring discrimination of artificial leather fragments retrieved from the victim's bag and fused fibers from the bumper of the suspect's automobile. In this report, basic studies were conducted on identification of artificial leathers and single fibers from leather materials. Fiber morphology was observed using scanning electron microscopy (SEM), color of these leather sheets was evaluated by microspectrophotometry (MSP), the leather components were measured by infrared micro spectrometry (micro-FT-IR) and the inorganic contents were ascertained by micro-X-ray fluorescence spectrometry (micro-XRF). These two methods contribute to other analytical methods too, in the case of utilized single fiber analytical methods. The combination of these techniques showed high potential of discrimination ability in forensic examinations of these artificial leather samples. In regard with smooth surface artificial leather sheet samples, a total of 182 sheets were obtained, including 177 colored sheets directly from 10 of 24 manufacturers in Japan, and five of them were purchased at retail circulation products. Nine samples of suede-like artificial leather were obtained, 6 of them were supplied from 2 manufacturers and 3 sheets were purchased as retailing product. Single fibers from the smooth surface artificial leather sheets showed characteristic for surface markings, and XRF could effectively discriminate between these sheets. The combination of results of micro-FT-IR, color evaluation by MSP and the contained inorganic elements by XRF enabled to discriminate about 92% of 15,576 pairs comparison. Five smooth surface samples form retailing products were discriminated by their chemical composition into four categories, and in addition color information to this result, they were clearly distinguished. Suede-like artificial leather sheets showed characteristic extra-fine fibers on their surface by the observation of SEM imaging, providing high discriminating ability, in regard with suede-like artificial leather sheets were divided into three categories by micro-FT-IR, and the combination of these results and color evaluation information, it was possible to discriminate all the nine suede-like artificial leather sheets examined.

Recombinant Lipases and Phospholipases and Their Use as Biocatalysts for Industrial Applications

PubMed Central

Borrelli, Grazia M.; Trono, Daniela

2015-01-01

Lipases and phospholipases are interfacial enzymes that hydrolyze hydrophobic ester linkages of triacylglycerols and phospholipids, respectively. In addition to their role as esterases, these enzymes catalyze a plethora of other reactions; indeed, lipases also catalyze esterification, transesterification and interesterification reactions, and phospholipases also show acyltransferase, transacylase and transphosphatidylation activities. Thus, lipases and phospholipases represent versatile biocatalysts that are widely used in various industrial applications, such as for biodiesels, food, nutraceuticals, oil degumming and detergents; minor applications also include bioremediation, agriculture, cosmetics, leather and paper industries. These enzymes are ubiquitous in most living organisms, across animals, plants, yeasts, fungi and bacteria. For their greater availability and their ease of production, microbial lipases and phospholipases are preferred to those derived from animals and plants. Nevertheless, traditional purification strategies from microbe cultures have a number of disadvantages, which include non-reproducibility and low yields. Moreover, native microbial enzymes are not always suitable for biocatalytic processes. The development of molecular techniques for the production of recombinant heterologous proteins in a host system has overcome these constraints, as this allows high-level protein expression and production of new redesigned enzymes with improved catalytic properties. These can meet the requirements of specific industrial process better than the native enzymes. The purpose of this review is to give an overview of the structural and functional features of lipases and phospholipases, to describe the recent advances in optimization of the production of recombinant lipases and phospholipases, and to summarize the information available relating to their major applications in industrial processes. PMID:26340621

Recombinant Lipases and Phospholipases and Their Use as Biocatalysts for Industrial Applications.

PubMed

Borrelli, Grazia M; Trono, Daniela

2015-09-01

Lipases and phospholipases are interfacial enzymes that hydrolyze hydrophobic ester linkages of triacylglycerols and phospholipids, respectively. In addition to their role as esterases, these enzymes catalyze a plethora of other reactions; indeed, lipases also catalyze esterification, transesterification and interesterification reactions, and phospholipases also show acyltransferase, transacylase and transphosphatidylation activities. Thus, lipases and phospholipases represent versatile biocatalysts that are widely used in various industrial applications, such as for biodiesels, food, nutraceuticals, oil degumming and detergents; minor applications also include bioremediation, agriculture, cosmetics, leather and paper industries. These enzymes are ubiquitous in most living organisms, across animals, plants, yeasts, fungi and bacteria. For their greater availability and their ease of production, microbial lipases and phospholipases are preferred to those derived from animals and plants. Nevertheless, traditional purification strategies from microbe cultures have a number of disadvantages, which include non-reproducibility and low yields. Moreover, native microbial enzymes are not always suitable for biocatalytic processes. The development of molecular techniques for the production of recombinant heterologous proteins in a host system has overcome these constraints, as this allows high-level protein expression and production of new redesigned enzymes with improved catalytic properties. These can meet the requirements of specific industrial process better than the native enzymes. The purpose of this review is to give an overview of the structural and functional features of lipases and phospholipases, to describe the recent advances in optimization of the production of recombinant lipases and phospholipases, and to summarize the information available relating to their major applications in industrial processes.

The emission characteristics and the related malodor intensities of gaseous reduced sulfur compounds (RSC) in a large industrial complex

NASA Astrophysics Data System (ADS)

Kim, Ki-Hyun; Jeon, Eui-Chan; Choi, Ye-Jin; Koo, Youn-Seo

In this study, the concentrations of major reduced sulfur compounds (RSC: H 2S, CH 3SH, DMS, CS 2 and DMDS) were determined from various emission sources located within the Ban-Wall (BW)/ Si-Hwa (SH) industrial complex in Ansan city, Korea. The measurement data were obtained from a total of 202 individual points at 77 individual companies during 2004-2005. The highest RSC concentration levels came most dominantly from H 2S (300 (mean) and 0.86 ppb (median)) followed by CS 2, while the results of CH 3, DMS, and DMDS are notably lower at the mean concentration levels of a few ppb. These data were evaluated further after being grouped into two different classification schemes: 9 industry sectors and 9 processing unit types. The strongest emissions of RSC, when evaluated among different industry sectors, are generally found from such industry types as leather, food, paper/pulp, as well as waste/sewage related ones. In contrast, when these RSC data are compared across different processing units, the highest values were seen most frequently from such units as junction boxes, aeration tanks, and settling tanks. The assessment of data in terms of relative contribution to malodor intensity showed that H 2S and CH 3SH are more important than others. The overall results of the present study suggest that information combining RSC speciation and types of anthropogenic activities may be used to distinguish the patterns of odorous pollution in areas affected by strong source processes.

Rehabilitation of river sediments contaminated by heavy metals from tanning industries using the phytoextraction technique

NASA Astrophysics Data System (ADS)

Beltrá Castillo, Juan Carlos; García Orenes, Fuensanta; Mora Navarro, José; Murcia Navarro, Francisco Jose; Zornoza Belmonte, Raúl; Faz Cano, Ángel; Gómez-Garrido, Melisa

2017-04-01

Leather tanning is an industrial sector of great tradition in Spain that has progressively evolved until it has reached a high degree of technification in the present. However, in its early days, the leather tanning industry has always been considered a dirty and polluting activity, mainly due to the water spills that ended up in the river channels. The Guadalentin Valley between Lorca and Murcia (SE Spain) is characterised by intensive crop and pig production, and an extensive agroalimentary and leather tannery industry. These anthropogenic sources have released salts and metals such as copper (Cu), zinc (Zn) and chromium (Cr) into Guadalentin river. Up to 2003, wastewater was discharged directly to the dry river, immediately upstream of the urban nucleus of Lorca, without any previous treatment. It contained high concentrations of inorganic salts and heavy metals (Cu, Zn and Cr). Spills, in some events, had a flow of 10 000 m3 d-1, with concentration of Cr over 500 mg L-1. Phytoremediation is a sustainable alternative that allows the environmental rehabilitation of fluvial dry sediments through the transfer of heavy metals from the contaminated soils to the native vegetation present. Atriplex halimus, salsola oppositifolia, suaeda vera and tamarix africana were the most representative autochthonous phytoextractor species that were planted to study the degree of decontamination of dry river sediments before planting and 12 months after planting. The sediments characterization was done by a sampling grid of 40 000 m2 (500 m x 8 m) where samples were taken at 3 depths (0-20 cm, 20-50 cm and 5-100 cm) every 50 m. A vegetation study was carried out by random plots of 10 m x 10 m. The results indicated that after 12 months the vegetation cover increased between 35% and 70%. The degree of contamination of Cu, Zn and Cr of the river dry sediments decreased slightly, being the atriplex halimus the plant specie that presented the highest value of the bioaccumulation factor of all the studied metals. Therefore, the phytoremediation is a sustainable non-destructive technique with the environment that allows the long-term in situ decontamination of locations affected by contamination of heavy metals.

Solid-state fermentation and composting as alternatives to treat hair waste: A life-cycle assessment comparative approach.

PubMed

Catalán, Eva; Komilis, Dimitrios; Sánchez, Antoni

2017-07-01

One of the wastes associated with leather production in tannery industries is the hair residue generated during the dehairing process. Hair wastes are mainly dumped or managed through composting but recent studies propose the treatment of hair wastes through solid-state fermentation (SSF) to obtain proteases and compost. These enzymes are suitable for its use in an enzymatic dehairing process, as an alternative to the current chemical dehairing process. In the present work, two different scenarios for the valorization of the hair waste are proposed and assessed by means of life-cycle assessment: composting and SSF for protease production. Detailed data on hair waste composting and on SSF protease production are gathered from previous studies performed by our research group and from a literature survey. Background inventory data are mainly based on Ecoinvent version 3 from software SimaPro® 8. The main aim of this study was to identify which process results in the highest environmental impact. The SSF process was found to have lower environmental impacts than composting, due to the fact that the enzyme use in the dehairing process prevents the use of chemicals traditionally used in the dehairing process. This permits to reformulate an industrial process from the classical approach of waste management to a novel alternative based on circular economy.

Effect of Storage on the Physico-Chemical and Antioxidant Properties of Strawberry and Kiwi Leathers.

PubMed

Concha-Meyer, Anibal A; D'Ignoti, Valeria; Saez, Barbara; Diaz, Ricardo I; Torres, Carolina A

2016-03-01

Strawberry and kiwi leathers were used to develop a new healthy and preservative-free fruit snack for new markets. Fruit puree was dehydrated at 60 °C for 20 h and subjected to accelerated storage. Soluble solids, titratable acidity, pH, water activity (aw ), total phenolic (TP), antioxidant activity (AOA) and capacity (ORAC), and color change (browning index) were measured in leathers, cooked, and fresh purees. An untrained panel was used to evaluate consumer acceptability. Soluble solids of fresh purees were 11.24 to 13.04 °Brix, whereas pH was 3.46 to 3.39. Leathers presented an aw of 0.59 to 0.67, and a moisture content of 21 kg water/100 kg. BI decreased in both leathers over accelerated storage period. TP and AOA were higher (P ≤ 0.05) in strawberry formulations. ORAC decreased 57% in strawberry and 65% in kiwi leathers when compared to fruit puree. TP and AOA increased in strawberries during storage. Strawberry and Kiwi leathers may be a feasible new, natural, high antioxidant, and healthy snack for the Chilean and other world markets, such as Europe, particularly the strawberry leather, which was preferred by untrained panelists. © 2016 Institute of Food Technologists®

Hexavalent and trivalent chromium in leather: What should be done?

PubMed

Moretto, Angelo

2015-11-01

Trivalent chromium compounds are used for leather tanning, and chromium may be released during use of leather goods. In certain instances, small amounts of hexavalent chromium can be formed and released. Both trivalent and hexavalent chromium can elicit allergic skin reaction in chromium sensitised subjects, the latter being significantly more potent. Induction of sensitisation only occurs after exposure to hexavalent chromium. A minority of subjects are sensitised to chromium, and in a fraction of these subjects allergic skin reaction have been described after wearing leather shoes or, less frequently, other leather goods. The evidence that in all these cases the reaction is related to hexavalent chromium is not always strong. The content of hexavalent chromium in leather is regulated in European Union, but rate of release rather than content is relevant for allergic skin reaction. The role of trivalent chromium appear much less relevant if at all. Modern tanning procedure do not pose significant risk due to either hexavalent or trivalent chromium. Dismissing bad quality and worn-off leather goods is relevant in reducing or eliminating the skin reaction. It should also be pointed out that shoe components or substances other than chromium in leather may cause allergic/irritative skin reactions. Copyright © 2015 Elsevier Inc. All rights reserved.

Quantitative aspects of contact allergy to chromium and exposure to chrome-tanned leather.

PubMed

Hansen, Malene Barré; Rydin, Stefan; Menné, Torkil; Duus Johansen, Jeanne

2002-09-01

The potential of trivalent and hexavalent chromium to induce and elicit allergic contact dermatitis and the degree of chromium exposure from leather products are reviewed. Chromium dermatitis is often due to exposure in the occupational environment, with cement being one of the most common chromium sources. However, consumer products such as chromium(III)-tanned leather products are also an important source of chromium exposure. Apart from Cr(III), which is used for tanning, leather often also contains trace amounts of Cr(VI), which is formed by oxidation of Cr(III) during the tanning process. In a recent study of the Cr(VI) content of leather products bought on the Danish market, 35% of such articles had a Cr(VI) content above the detection limit of 3 p.p.m., ranging from 3.6 p.p.m. to 14.7 p.p.m. Leachable Cr(III) was detected at levels of 430-980 p.p.m. An examination of available dose-response studies showed that exposure to occluded patch test concentrations of 7-45 p.p.m. Cr(VI) elicits a reaction in 10% of the chromium-sensitive patients. When reviewing repeated open exposure studies, it is seen that either exposure to 5 p.p.m. Cr(VI) in the presence of 1% sodium lauryl sulfate (SLS) or exposure to 10 p.p.m. Cr(VI) alone both elicit eczema in chromium-sensitive patients. The eliciting capacity of Cr(III) has not been systematically investigated but, compared to Cr(VI), much higher concentrations are needed to elicit eczema.

Ultrasonic effects on titanium tanning of leather.

PubMed

Peng, Biyu; Shi, Bi; Sun, Danhong; Chen, Yaowen; Shelly, Dennis C

2007-03-01

The effects of ultrasound on titanium tanning of leather were investigated. Either 20 or 40 kHz ultrasound was applied to the titanium tanning of pigskins. Five different treatment conditions were carried out and the effects were examined, such as leather shrinkage temperature (T(s)), titanium content and titanium distribution in the leather. Overall heat loading was carefully controlled. Results showed that 20 kHz ultrasound effectively improves titanium agent penetration into the hide and increases the leather's shrinkage temperature. Doubling the frequency to 40 kHz produced negligible enhancements. An impressive 105.6 degrees C T(s) was achieved using 20 kHz ultrasound pretreatment of the tanning liquor followed by 20 kHz ultrasound in the tanning mixture (liquor plus pigskins) in a special salt-free medium. Finally, using a unique ultrasonic tanning drum with 26.5 kHz ultrasound, the T(s) reached a record level of 106.5 degrees C, a value not achieved in conventional (no ultrasound) titanium tanning. The ultrasonic effects on titanium tanning of leather are judged to make a superior mineral tanned leather.

Design and development of LED-based irregular leather area measuring machine

NASA Astrophysics Data System (ADS)

Adil, Rehan; Khan, Sarah Jamal

2012-01-01

Using optical sensor array, a precision motion control system in a conveyer follows the irregular shaped leather sheet to measure its surface area. In operation, irregular shaped leather sheet passes on conveyer belt and optical sensor array detects the leather sheet edge. In this way outside curvature of the leather sheet is detected and is then feed to the controller to measure its approximate area. Such system can measure irregular shapes, by neglecting rounded corners, ellipses etc. To minimize the error in calculating surface area of irregular curve to the above mentioned system, the motion control system only requires the footprint of the optical sensor to be small and the distance between the sensors is to be minimized. In the proposed technique surface area measurement of irregular shaped leather sheet is done by defining velocity and detecting position of the move. The motion controller takes the information and creates the necessary edge profile on point-to-point bases. As a result irregular shape of leather sheet is mapped and is then feed to the controller to calculate surface area.

The role of intestinal microflora in the activation of benzidine and benzidine congener based dyes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cerniglia, C.E.; Franklin, W.; Campbell, W.L.

1988-09-01

Benzidine-based dyes are widely used in the dye manufacturing, textile dyeing, color paper printing and leather industries. Some benzidine based dyes have been shown to be carcinogenic due to their biotransformation in the liver or in the gastrointestinal tract to benzidine, a long recognized human urinary bladder carcinogen. Occupational exposure to workers can be through skin absorption, inhalation and ingestion of the benzidine based dyes. Previous studies of benzidine based dye metabolism have shown that enzymatic reduction of the azo group, yielding benzidine is an essential step in the activation of these compounds to genotoxic species. Azo reduction activity ismore » present in both the liver and gastrointestinal tract and little is known whether the first step in the toxification process of benzidine based dyes occurs at either site. They are investigating the capacity of intestinal microflora to metabolize benzidine-based dyes and determine their overall importance in the activation of this class of industrially important chemicals.« less

A review on applicability of naturally available adsorbents for the removal of hazardous dyes from aqueous waste.

PubMed

Sharma, Pankaj; Kaur, Harleen; Sharma, Monika; Sahore, Vishal

2011-12-01

The effluent water of many industries, such as textiles, leather, paper, printing, cosmetics, etc., contains large amount of hazardous dyes. There is huge number of treatment processes as well as adsorbent which are available for the processing of this effluent water-containing dye content. The applicability of naturally available low cast and eco-friendly adsorbents, for the removal of hazardous dyes from aqueous waste by adsorption treatment, has been reviewed. In this review paper, we have provided a compiled list of low-cost, easily available, safe to handle, and easy-to-dispose-off adsorbents. These adsorbents have been classified into five different categories on the basis of their state of availability: (1) waste materials from agriculture and industry, (2) fruit waste, (3) plant waste, (4) natural inorganic materials, and (5) bioadsorbents. Some of the treated adsorbents have shown good adsorption capacities for methylene blue, congo red, crystal violet, rhodamine B, basic red, etc., but this adsorption process is highly pH dependent, and the pH of the medium plays an important role in the treatment process. Thus, in this review paper, we have made some efforts to discuss the role of pH in the treatment of wastewater.

Biodegradable packing materials from hydrolysates of collagen waste proteins.

PubMed

Langmaier, F; Mokrejs, P; Kolomaznik, K; Mladek, M

2008-01-01

Enzymatic hydrolysates of waste collagen proteins (H), from current industrial manufacture (leather, edible meat product casings, etc.) of mean molecular mass 20-30 kDa by a reaction with dialdehyde starch (DAS), produces hydrogels applicable as biodegradable (or even edible) packaging materials for food, cosmetic and pharmaceutical products. Thermo-reversibility of prepared hydrogels is given by concentrations of H and DAS in a reaction mixture. At concentrations of H 25-30% (w/w) and that of DAS 15-20% (related to weight of hydrolysate), thermo-reversible hydrogels arise, which can be processed into packaging materials by a technique similar to that of soft gelatin capsules (SGC). Exceeding the limit of 20% DAS leads to hydrogels that are thermo-reversible only in part, a further increase in DAS concentration then leads to thermo-irreversible gels whose processing into biodegradable packaging materials necessitates employment of other procedures.

Soccer players' fitting perception of different upper boot materials.

PubMed

Olaso Melis, J C; Priego Quesada, J I; Lucas-Cuevas, A G; González García, J C; Puigcerver Palau, S

2016-07-01

The present study assessed the influence of upper boot materials on fitting perception. Twenty players tested three soccer boots only differing in the upper boot material (natural calf leather, natural kangaroo leather and synthetic leather). Players reported fitting perception and preference on specific foot areas using a perceived fitting scale. Ratings were averaged for every foot area. Repeated measures ANOVA was used to analyze the differences between boots. The kangaroo leather boots were perceived tighter and closer to the preferred fitting in general fitting, metatarsals area and instep area. The synthetic leather boots were perceived as the loosest and as the most distant boot from the preferred fitting in medial front area and instep area. In conclusion, the type of upper boot material influences the fitting perception of soccer players. The kangaroo leather was the material whose fitting was perceived closest to the players fitting preference. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Adsorption of leather dyes on activated carbon from leather shaving wastes: kinetics, equilibrium and thermodynamics studies.

PubMed

Manera, Christian; Tonello, Andrezza Piroli; Perondi, Daniele; Godinho, Marcelo

2018-03-23

In this work, the adsorption of Acid Black 210 (AB210) and Acid Red 357 (AR357) onto activated carbon prepared from leather shaving wastes (ACLW) was investigated. The activated carbon presented a surface area of 800.4 m²/g with an average pore size of 1.27 nm. The kinetic study showed that the adsorption of both dyes followed the Elovich kinetic model while the AB210 and AR357 isotherm data were well described by the Langmuir and BET models, respectively. Furthermore, the Boyd plot revealed that the adsorption of the leather dyes on activated carbon was mainly governed by film diffusion. The pH had a strong influence on the adsorption, and the higher amounts of dye adsorbed were obtained at pH 2. The obtained activated carbon exhibited a high monolayer adsorption capacity of 573.9 and 204.4 mg/g for AB210 and AR357, respectively. Its high capacity is mainly attributed to its basicity (0.17 mmol/g) and high surface area. Desorption efficiency of the spent activated carbon was found to be 54.3% and 43.0% for AB210 and AR357, respectively. The spontaneity of the process was demonstrated by the negative values of the Gibbs free energy change.

[Research on source profile of aerosol organic compounds in leather plant].

PubMed

Wang, Bo-Guang; Zhou, Yan; Feng, Zhi-Cheng; Liu, Hui-Xuan

2009-04-15

Through investigating current air pollution condition for PM10 in every factories of different style leather plants in Pearl River Delta, characteristic profile of semi-volatile organic compounds in PM10 emitted from leather factories and their contents were researched by using ultrasonic and gas chromatography and mass spectrum technology. The 6 types of organic compounds containing 46 species in total were found in the collected samples, including phenyl compounds, alcohols, PAHs, acids, esters and amides. The concentrations of PM10 in leather tanning plant, leather dying plant and man-made leather plant were 678.5, 454.5, 498.6 microgm x m(-3) respectively, and concentration of organic compounds in PM10 were 10.04, 6.89, 14.21 microg x m(-3) in sequence. The more important type of pollutants in each leather plants had higher contribution to total organic mass as follows, esters and amides in tanning plants profile account for 43.47% and 36.51% respectively; esters and alcohols in dying plants profiles account for 52.52% and 16.16% respectively; esters and amide in man-made leather plant have the highest content and account for 57.07% and 24.17% respectively. In the aerosol organic source profiles of tested leather plants, 9-octadecenamide was the abundant important species with the weight of 26.15% in tanning plant, and Bis(2-ethylhexyl) phthalate was up to 44.19% in the dying plant, and Bis(2-ethylhexyl) maleate and 1-hydroxy-piperidine had obviously higher weight in man-made plant than the other two plants.

[Determination of short chain chlorinated paraffins in leather products by solid phase extraction coupled with gas chromatography-mass spectrometry].

PubMed

Zhang, Weiya; Wan, Xin; Li, Lixia; Wang, Chengyun; Jin, Shupei; Xing, Jun

2014-10-01

The short chain chlorinated paraffins (SCCPs) are the additives frequently used in the leather production in China, but they have been put into the list of forbidden chemicals issued by European Union recently. In fact, there is not a commonly recognized method for the determination of the SCCPs in the leather products due to the serious matrix interferences from the leather products and the complex chemical structures of the SCCPs. A method of solid phase extraction coupled with gas chromatography-mass spectrometry (SPE-GC-MS) was established for the determination of the SCCPs in the leather products after the optimization of the SPE conditions. It was found that the interferences from the leather products were thor- oughly separated from the analyte of the SCCPs on a home-made solid phase extraction (SPE) column filled with silica packing while eluted with a mixed solvent of n-hexane-methylene chloride (2:1, v/v). With this method, the recoveries for the SCCPs spiked in the real leather samples varied from 90.47% to 99.00% with the relative standard deviations (RSDs) less than 6.7%, and the limits of detection (LODs) were between 0.069 and 0.110 mg/kg. This method is suitable for qualitative and quantitative analysis of SCCPs in the leather products.

Characterization and antimicrobial performance of nano silver coatings on leather materials

PubMed Central

Lkhagvajav, N.; Koizhaiganova, M.; Yasa, I.; Çelik, E.; Sari, Ö.

2015-01-01

In this study, the characterization and the antimicrobial properties of nano silver (nAg) coating on leather were investigated. For this purpose, turbidity, viscosity and pH of nAg solutions prepared by the sol-gel method were measured. The formation of films from these solutions was characterized according to temperature by Differential Thermal Analysis-Thermogravimetry (DTA-TG) equipment. The surface morphology of treated leathers was observed using Scanning Electron Microscopy (SEM). The antimicrobial performance of nAg coatings on leather materials to the test microorganisms as Escherichia coli , Staphylococcus aureus , Candida albicans and Aspergillius niger was evaluated by the application of qualitative (Agar overlay method) and quantitative (percentage of microbial reduction) tests. According to qualitative test results it was found that 20 μg/cm 2 and higher concentrations of nAg on the leather samples were effective against all microorganisms tested. Moreover, quantitative test results showed that leather samples treated with 20 μg/cm 2 of nAg demonstrated the highest antibacterial activity against E. coli with 99.25% bacterium removal, whereas a 10 μg/cm 2 concentration of nAg on leather was enough to exhibit the excellent percentage reduction against S. aureus of 99.91%. The results are promising for the use of colloidal nano silver solution on lining leather as antimicrobial coating. PMID:26221087

Life cycle assessment as a tool for the environmental improvement of the tannery industry in developing countries.

PubMed

Rivela, B; Moreira, M T; Bornhardt, C; Méndez, R; Feijoo, G

2004-03-15

A representative leather tannery industry in a Latin American developing country has been studied from an environmental point of view, including both technical and economic analysis. Life Cycle Analysis (LCA) methodology has been used for the quantification and evaluation of the impacts of the chromium tanning process as a basis to propose further improvement actions. Four main subsystems were considered: beamhouse, tanyard, retanning, and wood furnace. Damages to human health, ecosystem quality, and resources are mainly produced by the tanyard subsystem. The control and reduction of chromium and ammonia emissions are the critical points to be considered to improve the environmental performance of the process. Technologies available for improved management of chromium tanning were profoundly studied, and improvement actions related to optimized operational conditions and a high exhaustion chrome-tanning process were selected. These actions related to the implementation of internal procedures affected the economy of the process with savings ranging from US dollars 8.63 to US dollars 22.5 for the processing of 1 ton of wet salt hides, meanwhile the global environmental impact was reduced to 44-50%. Moreover, the treatment of wastewaters was considered in two scenarios. Primary treatment presented the largest reduction of the environmental impact of the tanning process, while no significant improvement for the evaluated impact categories was achieved when combining primary and secondary treatments.

Netherlands. Section 23. Weather and Climate

DTIC Science & Technology

1961-04-01

restricted visibilities most frequent during the day when the smoke from home and industrial fires reaches a peak. Restricted visibilities are least...on the ground surmounted by a warmer layer which acts as a lid, preventing smoke, fog, or any other contaminant from escaping into the upper at...cotton visored cap, shirt, trousers, and underwear , supple- mented with a hooded water-repellent wind-resist- ant coat. It also includes leather

Polycyclic aromatic hydrocarbons in water, sediment, soil, and plants of the Aojiang River waterway in Wenzhou, China

PubMed Central

Li, Jianwang; Shang, Xu; Zhao, Zhixu; Tanguay, Robert L.; Dong, Qiaoxiang; Huang, Changjiang

2012-01-01

The town of Shuitou was renowned as the leather capital of China because of its large-scale tanning industry, but the industry’s lack of pollution controls has caused severe damage to the local water system. This study determined 15 priority polycyclic aromatic hydrocarbons (PAHs) in water, sediment, soil, and plant samples collected from Aojiang River and its estuary. The total PAHs ranged from 910 to 1520 ng/L in water samples. The total PAH in sediments were moderate to low in comparison with other rivers and estuaries in China, but the relative proportions of PAHs per million people are high when considering the population size associated with each watershed. Ratios of fluoranthene/pyrene and PAHs with low/high molecular weight suggest a petrogenic PAH origin. The PAH composition profile in soil was similar to that in sediment with 4–6 ring PAHs being dominant. The PAHs with 2–3 rings were the dominant species in plant leaves. There were no correlations between PAHs in soils and in plants, suggesting that PAHs accumulate in plant leaves through absorption from the air. The general observation of elevated PAH concentrations in all matrix suggests a possible contribution by the local leather industry on the PAH concentrations in the Aojiang watershed. PMID:19726127

Anthropogenic Chromium Emissions in China from 1990 to 2009

PubMed Central

Cheng, Hongguang; Zhou, Tan; Li, Qian; Lu, Lu; Lin, Chunye

2014-01-01

An inventory of chromium emission into the atmosphere and water from anthropogenic activities in China was compiled for 1990 through to 2009. We estimate that the total emission of chromium to the atmosphere is about 1.92×105t. Coal and oil combustion were the two leading sources of chromium emission to the atmosphere in China, while the contribution of them showed opposite annual growth trend. In total, nearly 1.34×104t of chromium was discharged to water, mainly from six industrial categories in 20 years. Among them, the metal fabrication industry and the leather tanning sector were the dominant sources of chromium emissions, accounting for approximately 68.0% and 20.0% of the total emissions and representing increases of15.6% and 10.3% annually, respectively. The spatial trends of Cr emissions show significant variation based on emissions from 2005 to 2009. The emission to the atmosphere was heaviest in Hebei, Shandong, Guangdong, Zhejiang and Shanxi, whose annual emissions reached more than 1000t for the high level of coal and oil consumption. In terms of emission to water, the largest contributors were Guangdong, Jiangsu, Shandong and Zhejiang, where most of the leather production and metal manufacturing occur and these four regions accounted for nearly 47.4% of the total emission to water. PMID:24505309

Safe disposal of toxic chrome buffing dust generated from leather industries.

PubMed

Swarnalatha, S; Srinivasulu, T; Srimurali, M; Sekaran, G

2008-01-31

The high concentration of trivalent chromium along with organic/inorganic compounds in chrome buffing dust (CBD), the solid waste discharged from leather industries, causes severe groundwater contamination on land co-disposal and chronic air pollution during thermal incineration. In the present investigation, CBD was subjected to starved air incineration (SAI) at 800 degrees C in a thermal incinerator under different flow rates of oxygen to optimize the oxygen required to incinerate the organic compounds and simultaneously preventing the conversion of Cr(3+) to Cr(6+). The energy audit of SAI of buffing dust under the external supply of oxygen was carried out under different incineration conditions. The bottom ash from SAI was effectively solidified/stabilized using Portland cement and fine aggregate. The solidified blocks were tested for unconfined compressive strength and heavy metal leaching. Unconfined compressive strength of the blocks was in the range of 120-180 kg/cm(2). The stabilization of chromium(III) in the cement gel matrix was confirmed using Scanning Electron Microscopy SEM, Electron Paramagnetic Resonance spectroscopy (EPR) and X-ray diffraction spectroscopy (XRD). Leachability studies through TCLP on solidified blocks were carried out to determine the degree of leaching of chromium and organic compounds (expressed as COD) under standard conditions.

Occupational allergic contact dermatitis and patch test results of leather workers at two Indonesian tanneries.

PubMed

Febriana, Sri Awalia; Jungbauer, Frank; Soebono, Hardyanto; Coenraads, Pieter-Jan

2012-11-01

Tannery workers are at considerable risk of developing occupational contact dermatitis. Occupational skin diseases in tannery workers in newly industrialized countries have been reported, but neither the prevalence of occupational allergic contact dermatitis nor the skin-sensitizing agents were specifically examined in those studies. To assess the prevalence of occupational allergic contact dermatitis in Indonesian tanneries, identify the causative allergens, and propose a tannery work series of patch test allergens. A cross-sectional study in all workers at two Indonesian tanneries was performed to assess the prevalence of occupational contact dermatitis via a questionnaire-based interview and skin examination. Workers with occupational contact dermatitis were patch tested to identify the causative allergens. Occupational contact dermatitis was suspected in 77 (16%) of the 472 workers. Thirteen (3%) of these 472 workers were confirmed to have occupational allergic contact dermatitis. Potassium dichromate (9.2%), N,N-diphenylguanidine (5.3%), benzidine (3.9%) and sodium metabisulfite (2.6%) were found to be the occupationally relevant sensitizers. The sensitization pattern showed some differences from the data in studies reported from other newly industrial countries. We compiled a 'tannery work series' of allergens for patch testing. A number of these allergens may also be considered for patch testing in patients with (leather) shoe dermatitis. © 2012 John Wiley & Sons A/S.

Prevalence and risk factors of contact dermatitis among clothing manufacturing employees in Beijing: A cross-sectional study.

PubMed

Chen, Yu-Xin; Cheng, Hai-Yan; Li, Lin-Feng

2017-03-01

Little is known about the epidemiology of contact dermatitis (CD) in the Chinese clothing industry. This study aimed to investigate the prevalence and some risk factors of contact dermatitis among clothing manufacturing employees in Beijing.This cross-sectional study was conducted by interview using self-administered questionnaires and skin examination between May and August in 2016. Five-hundred twenty-nine employees who had worked at sewing, ironing, and as managers at 12 clothing manufacturing factories were studied.The overall 1-year prevalence of CD among the clothing employees was 28.5% (151/529 employees), with significantly higher prevalence among ironing workers (50%) and sewers (31.7%) compared with managers (12.7%; P < 0.001, n = 529). A significant association was noticed between the 1-year prevalence of CD and types of occupation (sewers and ironing workers versus managers, respectively), exposure to garment materials (leather and feather), dry skin, allergic rhinitis, age, and smoking.Among employees in Chinese clothing industry, sewers and ironing workers had a higher 1-year prevalence of CD than managers. It is noteworthy that exposure to leather and feather materials and the types of manual work are associated with CD, as well as dry skin and allergic rhinitis.

Hair chromium as an index of chromium exposure of tannery workers.

PubMed Central

Randall, J A; Gibson, R S

1989-01-01

The use of hair chromium (Cr) concentrations as an index of Cr exposure of tannery workers was investigated. As has been shown earlier, Cr from Cr III compounds used in the leather tanning industry is absorbed because concentrations of Cr in serum and urine of tannery workers are significantly increased compared with corresponding concentrations for unexposed controls. Hair samples were collected from 71 male tannery workers from four southern Ontario tanneries and from 53 male controls not exposed to Cr in the workplace. Subjects were matched for age, race, and socioeconomic status. Hair samples were washed, ashed in a low temperature asher, and analysed by flameless atomic absorption. The median hair Cr concentrations for the tannery workers (551 ng/g) was significantly higher (p = 0.0001) than for the controls (123 ng/g). For the tannery workers, hair Cr concentrations were positively and significantly correlated with serum Cr (r = 0.52, p less than 0.01) and with the preshift and postshift urinary Cr/creatinine ratios (r = 0.43, p less than 0.01; r = 0.64, p less than 0.01, respectively). These data indicate that trivalent Cr absorbed from leather tanning compounds results in raised concentrations of Cr in hair and that hair Cr concentrations may be used as an index of industrial Cr exposure. PMID:2930727

Prevalence and risk factors of contact dermatitis among clothing manufacturing employees in Beijing

PubMed Central

Chen, Yu-Xin; Cheng, Hai-Yan; Li, Lin-Feng

2017-01-01

Abstract Little is known about the epidemiology of contact dermatitis (CD) in the Chinese clothing industry. This study aimed to investigate the prevalence and some risk factors of contact dermatitis among clothing manufacturing employees in Beijing. This cross-sectional study was conducted by interview using self-administered questionnaires and skin examination between May and August in 2016. Five-hundred twenty-nine employees who had worked at sewing, ironing, and as managers at 12 clothing manufacturing factories were studied. The overall 1-year prevalence of CD among the clothing employees was 28.5% (151/529 employees), with significantly higher prevalence among ironing workers (50%) and sewers (31.7%) compared with managers (12.7%; P < 0.001, n = 529). A significant association was noticed between the 1-year prevalence of CD and types of occupation (sewers and ironing workers versus managers, respectively), exposure to garment materials (leather and feather), dry skin, allergic rhinitis, age, and smoking. Among employees in Chinese clothing industry, sewers and ironing workers had a higher 1-year prevalence of CD than managers. It is noteworthy that exposure to leather and feather materials and the types of manual work are associated with CD, as well as dry skin and allergic rhinitis. PMID:28328819

LEATHER TANNERY WASTE MANAGEMENT THROUGH PROCESS CHANGE, REUSE AND PRETREATMENT

EPA Science Inventory

Reduction of tannery waste, i.e., trivalent chromium, sulfide and oil and grease components has been accomplished by process change. Protein recovery and hydroclonic separation of solids was shown to be possible in tannery processing in reducing waste loading. All waste load redu...

Molecular spectroscopic study for suggested mechanism of chrome tanned leather.

PubMed

Nashy, Elshahat H A; Osman, Osama; Mahmoud, Abdel Aziz; Ibrahim, Medhat

2012-03-01

Collagen represents the structural protein of the extracellular matrix, which gives strength of hides and/or skin under tanning process. Chrome tan is the most important tanning agent all over the world. The methods for production of leather evolved over several centuries as art and engineering with little understanding of the underlying science. The present work is devoted to suggest the most probable mechanistic action of chrome tan on hide proteins. First the affect of Cr upon hide protein is indicated by the studied mechanical properties. Then the spectroscopic characterization of the hide protein as well as chrome tanned leather was carried out with Horizontal Attenuated Total Reflection (HATR) FT-IR. The obtained results indicate how the chromium can attached with the active sites of collagen. Molecular modeling confirms that chromium can react with amino as well as carboxylate groups. Four schemes were obtained to describe the possible interactions of chrome tan with hide proteins. Copyright © 2011 Elsevier B.V. All rights reserved.

Correlation between bulk- and surface chemistry of Cr-tanned leather and the release of Cr(III) and Cr(VI).

PubMed

Hedberg, Yolanda S; Lidén, Carola; Odnevall Wallinder, Inger

2014-09-15

About 1-3% of the adult general population in Europe is allergic to chromium (Cr). The assessment of the potential release of Cr(III) and Cr(VI) from leather is hence important from a human health and environmental risk perspective. The Cr(VI) content in leather was recently restricted in the European Union. The aim of this study was to assess possible correlations between the bulk and surface chemistry of leather, released Cr(III) and Cr(VI), and capacities of co-released leather specific species to reduce and complex released Cr. Four differently tanned leathers were characterized by scanning electron microscopy with energy dispersive spectroscopy, X-ray photoelectron spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and the diphenylcarbazide colorimetric method. Their characteristics were compared with results on Cr(III) and Cr(VI) release into artificial sweat (ASW, pH<6.5) and phosphate buffer (PB, pH 7.5-8.0), measured by means of spectrophotometry and atomic absorption spectroscopy. Co-released leather-specific species were shown to reduce Cr(VI), both in ASW and in PB. Their reduction capacities correlated with findings of the surface content of Cr and of released Cr. Leather samples without this capacity, and with less aromatic surface groups visible by ATR-FTIR, revealed Cr(VI) both at the surface and in solution (PB). Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Investigating organic molecules responsible of auxin-like activity of humic acid fraction extracted from vermicompost.

PubMed

Scaglia, Barbara; Nunes, Ramom Rachide; Rezende, Maria Olímpia Oliveira; Tambone, Fulvia; Adani, Fabrizio

2016-08-15

This work studied the auxin-like activity of humic acids (HA) obtained from vermicomposts produced using leather wastes plus cattle dung at different maturation stages (fresh, stable and mature). Bioassays were performed by testing HA concentrations in the range of 100-6000mgcarbonL(-1). (13)C CPMAS-NMR and GC-MS instrumental methods were used to assess the effect of biological processes and starting organic mixtures on HA composition. Not all HAs showed IAA-like activity and in general, IAA-like activity increased with the length of the vermicomposting process. The presence of leather wastes was not necessary to produce the auxin-like activity of HA, since HA extracted from a mix of cattle manure and sawdust, where no leather waste was added, showed IAA-like activity as well. CPMAS (13)CNMR revealed that HAs were similar independently of the mix used and that the humification process involved the increasing concentration of pre-existing alkali soluble fractions in the biomass. GC/MS allowed the identification of the molecules involved in IAA-like effects: carboxylic acids and amino acids. The concentration of active molecules, rather than their simple presence in HA, determined the bio-stimulating effect, and a good linear regression between auxin-like activity and active stimulating molecules concentration was found (R(2)=-0.85; p<0.01, n=6). Copyright © 2016 Elsevier B.V. All rights reserved.

The Preservation of Leather Bindings: Background, Organization of a Project, and Procedures.

ERIC Educational Resources Information Center

Brown, Meredith

This manual, intended primarily for use by preservation supervisors, includes a discussion of basic leather preservation techniques, and a description of the entire leather book preservation program at Olin Library, Cornell University. Discussions of work flow, materials, treatment steps, schedulinq, and recruiting student assistants are included.…

Association between cobalt allergy and dermatitis caused by leather articles--a questionnaire study.

PubMed

Bregnbak, David; Thyssen, Jacob P; Zachariae, Claus; Menné, Torkil; Johansen, Jeanne D

2015-02-01

Cobalt is a strong skin sensitizer and a prevalent contact allergen. Recent studies have recognized exposure to leather articles as a potential cause of cobalt allergy. To examine the association between contact allergy to cobalt and a history of dermatitis resulting from exposure to leather. A questionnaire case-control study was performed: the case group consisted of 183 dermatitis patients with a positive patch test reaction to cobalt chloride and a negative patch test reaction to potassium dichromate; the control group consisted of 621 dermatitis patients who did not react to either cobalt or chromium in patch testing. Comparisons were made by use of a χ(2) -test, Fisher's exact, and the Mann-Whitney test. Logistic regression analyses were used to test for associations while taking confounding factors into consideration. Leather was observed as the most frequent exposure source causing dermatitis in the case group. Although the case group significantly more often reported non-occupational dermatitis caused by leather exposure (p < 0.001), no association was found between cobalt allergy and dermatitis caused by work-related exposure to leather. Our study suggests a positive association between cobalt allergy and a history of dermatitis caused by non-occupational exposure to leather articles. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

[Manufacture of upholstered furniture and work-related upper limb musculoskeletal disorders: an industrial sector prevention project].

PubMed

Di Leone, G; Carino, M; Nicoletti, S; Trani, G; Ambrosi, L

2008-01-01

In cooperation with the IRCCS Fondazione Maugeri and the IRCCS Fondazione Ospedale Maggiore Policlinico - EPM-CEMOC, of Milan, the Local Health Unit in Bari, Italy carried out a research project, sponsored partly by the Italian Ministry of Health, on upper limb work-related musculoskeletal disorders (UL-WMSDs) in a specific manufacturing sector, the upholstered furniture industry. This "sofa district" is widely represented with approximately 14,000 workers and 500 factories over a wide geographic area of southern Italy. Advanced technology in the manufacturing process is combined with workers performing intensive arm-hand tasks. The aim of the study included: a) assessment of exposure to repetitive strain and movements of the upper limb in a representative sample of the factories using the OCRA method, b) analysis of the annual prevalence and incidence rates, c) definition of possible improvement via ergonomic solutions in the various factories. Via a network of occupational physicians a total of more than 6000 subjects were examined over a 5-year period. Case-definition was assessed through standardized procedures. A detailed description of the manufacturing process of the upholstered furniture industry and of the characteristics of the working population is provided Exposed groups at risk were:filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Data collected in private companies of different size in this extensive industrial "sofa area" emphasize the importance of prevention through adequate ergonomic solutions and the need to improve training programmes covering the whole area.

Aerobic Treatability of Waste Effluent from the Leather Finishing Industry

DTIC Science & Technology

1993-12-01

Thesis in Environmental Engineering by Jeffery A. Vinger Submitted in Partial Fulfillment / of the Requirements Acceslon -for [ for the Degree of NeS CRA...respirometer tests of the raw wastes and mass balance analysis. The results of Phase I were published in a report to the Seton Company as Environmental ...Randall (1992) states that the main driving forces behind the changes in paints and coatings toward water-based mixtures has been the environmental

Studies of obtaining and stability in aqueous medium of new complex compounds of Ti(IV) and Zr(IV) used in ecological leather tanning

NASA Astrophysics Data System (ADS)

Crudu, Marian; Sibiescu, Doina; Rosca, Ioan; Sutiman, Daniel; Vizitiu, Mihaela

2009-01-01

In this paper, the study of obtaining new coordination compounds of Ti(IV) and Zr(IV) using as ligand: D,L-β-iso-butyric acid, is presented. Also, the stability of these compounds in aqueous medium is studied. The studies of obtaining and of stability of the new compounds were accomplished in aqueous solutions using methods characteristic for coordination compounds: conductance and pH measurements. The combination ratios and the stability were determined with methods characteristic for studies in solutions. From experimental data resulted that the combination ratio of central metallic atoms with the ligand derived from D,L-β-iso-butyric acid was 1:2. From experimental data resulted that in strong acid and strong basic mediums, the coordination compounds could not be obtained. The optimal stability of the studied compounds is limited between 3-6, pH - values. This fact is in accordance with the conditions of using these compounds in ecological leather tanning. Of great importance is that these compounds were used with very good results in tanning processes of different types of leather. This fact evidenced that the ecological alternative of tanning is better than non-ecological tanning using chrome compounds. The importance of this paper consists in obtaining new coordination compounds that can be used in ecological leather tanning.

Interaction of collagen with chlorosulphonated paraffin tanning agents: Fourier transform infrared spectroscopic analysis and molecular dynamics simulations.

PubMed

Monti, Susanna; Bramanti, Emilia; Della Porta, Valentina; Onor, Massimo; D'Ulivo, Alessandro; Barone, Vincenzo

2013-09-21

The binding of chlorosulphonated paraffins to collagen triple helices is studied by means of classical molecular dynamics simulations and experimental spectroscopic techniques in order to disclose the principal characteristics of their interaction during the leather fattening process. Indeed, collagen is the main target to develop new leather modifying agents with specific characteristics, and an accurate design of the collagen binders, supported by predictive computational strategies, could be a successful tool to obtain new effective eco-compatible compounds able to impart to the leather the required functionalities and distinctive mechanical properties. Possible effects caused by the tanning agents on the collagen matrix have been identified from both experimental and theoretical points of view. Computational data in agreement with experiment have revealed that chlorosulphonated paraffins can interact favorably with the collagen residues having amine groups in their side chains (Arg, Lys, Asn and Gln) and reduce the tendency of the solvated collagen matrix to swell. However, the interference of chlorosulphonated paraffins with the unfolding process, which is operated mainly by the action of water, can be due both to covalent cross-linking of the collagen chains and intermolecular hydrogen bonding interactions involving also the hydroxyl groups of Hyp, Ser and Thr residues.

[Prevalence of upper limb work-related musculoskeletal disorders (UL-WMSDs) in workers of the upholstered furniture industry].

PubMed

Nicoletti, S; Carino, M; Di Leone, G; Trani, G; Carella, F; Rubino, G; Leone, E; Popolizio, R; Colafiglio, S; Ambrosi, L

2008-01-01

The upholstered furniture industry, the so-called "triangle of the sofa industry", is a geographic area of national and strategic economic importance in southern Italy. The single tasks are carried out mostly manually, with the characteristics of a handicraft approach. The aim of the survey was to assess the prevalence of upper limb work-related musculoskeletal disorders (UL-WMSDs) in 30 factories of the sofa industry located in a large geographic area of the Puglia and Basilicata Regions. In the period 1 January-31 December 2003 a network of occupational physicians investigated a population of 5.477 subjects (exposed n=3481, controls n=1996, M=3865, F=1612) in 30 different factories of the area. More than 60 percent of the total workforce studied was employed in large-sized companies (>500 employees). The following work tasks were considered: filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Case-definition was assessed through standardized procedures: symptoms by questionnaire plus physical and laboratory/imaging findings. Cumulative prevalence rates of UL-WMSDs as at 31 December 2003 reached values of up to 30% in high risk groups. Prevalence rates showed good correlation with the concise OCRA index used for assessment of exposure to repetitive strain and movements of the upper limb. The most frequently occurring disorders were tendon-related cysts and wrist tendonitis. Shoulder disorders were more frequent in male and female leather-cutting operators. This survey showed a significantly high prevalence of UL-WMSDs in sofa industry workers. It did not seem to be confirmed in this study that there was a greater female susceptibility to UL-WMSDs with the exception of carpal tunnel syndrome: gender difference seems to be less relevant at increasing levels of occupational exposure to repetitive movements and exertion of the upper limbs.

Polyurethanes from fluoroalkyl propyleneglycol polyethers

NASA Technical Reports Server (NTRS)

Trischler, F. D. (Inventor)

1969-01-01

A description is given of highly stable polyurethane polymers prepared by reacting a polyether with a diisocyanate. Compounded stocks of these polymers may be shaped and cured in conventional equipment used in the rubber industry. The solutions are dispersed gels prepared from the polymers and may be used for forming supported or unsupported films for coating fabrics or solid surfaces, and for forming adhesive bonds between a wide variety of plastics, elastomers, fabrics, metals, wood, leather, ceramics and the like.

Electrochemical treatment of evaporated residue of soak liquor generated from leather industry.

PubMed

Boopathy, R; Sekaran, G

2013-09-15

The organic and suspended solids present in soak liquor, generated from leather industry, demands treatment. The soak liquor is being segregated and evaporated in solar evaporation pans/multiple effect evaporator due to non availability of viable technology for its treatment. The residue left behind in the pans/evaporator does not carry any reuse value and also faces disposal threat due to the presence of high concentration of sodium chloride, organic and bacterial impurities. In the present investigation, the aqueous evaporated residue of soak liquor (ERSL) was treated by electrochemical oxidation. Graphite/graphite and SS304/graphite systems were used in electrochemical oxidation of organics in ERSL. Among these, graphite/graphite system was found to be effective over SS304/graphite system. Hence, the optimised conditions for the electrochemical oxidation of organics in ERSL using graphite/graphite system was evaluated by response surface methodology (RSM). The mass transport coefficient (km) was calculated based on pseudo-first order rate kinetics for both the electrode systems (graphite/graphite and SS304/graphite). The thermodynamic properties illustrated the electrochemical oxidation was exothermic and non-spontaneous in nature. The calculated specific energy consumption at the optimum current density of 50 mA cm(-2) was 0.41 kWh m(-3) for the removal of COD and 2.57 kWh m(-3) for the removal of TKN. Copyright © 2013 Elsevier B.V. All rights reserved.

Improvement in surface hydrophilicity and resistance to deformation of natural leather through O2/H2O low-temperature plasma treatment

NASA Astrophysics Data System (ADS)

You, Xuewei; Gou, Li; Tong, Xingye

2016-01-01

The natural leather was modified through O2/H2O low-temperature plasma treatment. Surface morphology was characterized by scanning electron microscopy (SEM) and the results showed that the pores on the leather surface became deeper and larger with enhanced permeability of water and vapor. XPS and FTIR-ATR was performed to determine the chemical composition of natural leather surface. Oxygen-containing groups were successfully grafted onto the surface of natural leather and oxygen content increased with longer treatment time. After O2/H2O plasma treatment, initial water contact angle was about 21° and water contact angles were not beyond 55° after being stored for 3 days. Furthermore, the tensile test indicated that the resistance to deformation had a prominent transform without sacrificing the tensile strength.

Biodegradation of organic pollutants in saline wastewater by halophilic microorganisms: a review.

PubMed

Castillo-Carvajal, Laura C; Sanz-Martín, José Luis; Barragán-Huerta, Blanca E

2014-01-01

Agro-food, petroleum, textile, and leather industries generate saline wastewater with a high content of organic pollutants such as aromatic hydrocarbons, phenols, nitroaromatics, and azo dyes. Halophilic microorganisms are of increasing interest in industrial waste treatment, due to their ability to degrade hazardous substances efficiently under high salt conditions. However, their full potential remains unexplored. The isolation and identification of halophilic and halotolerant microorganisms from geographically unrelated and geologically diverse hypersaline sites supports their application in bioremediation processes. Past investigations in this field have mainly focused on the elimination of polycyclic aromatic hydrocarbons and phenols, whereas few studies have investigated N-aromatic compounds, such as nitro-substituted compounds, amines, and azo dyes, in saline wastewater. Information regarding the growth conditions and degradation mechanisms of halophilic microorganisms is also limited. In this review, we discuss recent research on the removal of organic pollutants such as organic matter, in terms of chemical oxygen demand (COD), dyes, hydrocarbons, N-aliphatic and N-aromatic compounds, and phenols, in conditions of high salinity. In addition, some proposal pathways for the degradation of aromatic compounds are presented.

Occupational risks for colon cancer in Sweden.

PubMed

Chow, W H; Malker, H S; Hsing, A W; McLaughlin, J K; Weiner, J A; Stone, B J; Ericsson, J L; Blot, W J

1994-06-01

Using the Cancer-Environment Registry of Sweden, which links census information (1960) with cancer incidence data (1961 to 1979), we conducted a systematic, population-based assessment of colon cancer incidence among cohorts defined by industry and occupation for all employed persons in Sweden. Small but statistically significant excesses of colon cancer were observed among white-collar occupations, including administrators, professionals, and clerical and sales workers, whereas a reduction in incidence was found among workers in agricultural and related jobs, such as farmers, fishermen, and hunters. Analysis by subsite within the colon revealed little difference in results. The observed risk patterns are consistent with previous reports on colon cancer risk and occupational physical activity levels, ie, elevated risk among sedentary white-collar workers and reduced risk among agricultural workers. Few craftsman and production processing jobs were linked to colon cancer, although statistically significant excesses were observed among shoe and leather workers, metal smiths, and foundry workers in the metal manufacturing industry. The findings indicate that occupation in general is likely to play a relatively small role in colon cancer etiology, with perhaps its major contribution an indirect one via physical activity.

Evaluation of Flammability of Footwear Upper Materials. Patent and Regular Shoe Upper Leather vs. Porvair and Clarino Poromerics

DTIC Science & Technology

1984-09-01

leather is thus designated ŗ-ounce leather." -ll specimens, except the UL, had high-gloss polyurethane finishes. The UL ’eLi wr contained a...ITT Research Institute, October 1965, p. 18. 4.4 %d :i.bie 2. Comparativ ~e heat transfer values of shoe uppe materials vs. shoe upper materials with

Breakthrough Adsorption Study of Crude Oil Removal Using Buffing Dust

NASA Astrophysics Data System (ADS)

Setyaningsih, L. W. N.; Yuliansyah, A. T.; Prasetyo, A.; Arimanintan, S. K.; Putri, D. R.

2018-05-01

The utilization of leather industry solid waste as adsorbent to separate oil from water emulsions of surfactant flooding process is a solution that is relatively inexpensive. This study was conducted aiming to obtain a mathematical model that is appropriate for the adsorption process of crude oil by buffing dust in emulsion phase with a continuous adsorption method. Variations in the column adsorption experiments were carried out, such as: flow rate of feed of water-crude oil-surfactant, the concentration of crude oil in the feed, and mass of adsorbent used. Data were evaluated using three models: Adams Bohart, Thomas and Yan. Best results are obtained on the following conditions, the feed flow rate of 60 mL/minute, the crude oil concentration in feed is 1.5% volume and the mass of adsorbent used was 10 g. The values of kinetic constant and adsorption capacity obtained from Yan Model was 21.7774 mL/mg/minute and 220.9581 mg/g with the relative error obtained is 5.4424%.

40 CFR 425.40 - Applicability; description of the retan-wet finish-sides subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE... resulting from any tannery which processes previously tanned hides and skins (grain side only) into finished...

Glove Testing for Performance Against Flying Glass Shards

DTIC Science & Technology

2014-09-01

superior dexterity to those with leather palms could still provide protection from flying shards of glass. 15. SUBJECT TERMS PPE...test glove was subject to significant scorching. It was decided that a woven Kevlar® fiber glove with a leather layer, covering both the palm and... leather -palmed gloves were considered too bulky for use by personnel with small hands, greatly decreasing dexterity. The wearer could not

Evaluation and Source Apportionment of Heavy Metals (HMs) in Sewage Sludge of Municipal Wastewater Treatment Plants (WWTPs) in Shanxi, China

PubMed Central

Duan, Baoling; Liu, Fenwu; Zhang, Wuping; Zheng, Haixia; Zhang, Qiang; Li, Xiaomei; Bu, Yushan

2015-01-01

Heavy metals (HMs) in sewage sludge have become the crucial limiting factors for land use application. Samples were collected and analyzed from 32 waste water treatment plants (WWTPs) in the Shanxi Province, China. HM levels in sewage sludge were assessed. The multivariate statistical method principal component analysis (PCA) was applied to identify the sources of HMs in sewage sludge. HM pollution classes by geochemical accumulation index Igeo and correlation analyses between HMs were also conducted. HMs were arranged in the following decreasing order of mean concentration: Zn > Cu > Cr > Pb > As > Hg > Cd; the maximum concentrations of all HMs were within the limit of maximum content permitted by Chinese discharge standard. Igeo classes of HMs pollution in order from most polluted to least were: Cu and Hg pollution were the highest; Cd and Cr pollution were moderate; Zn, As and Pb pollution were the least. Sources of HM contamination in sewage sludge were identified as three components. The primary contaminant source accounting for 35.7% of the total variance was identified as smelting industry, coking plant and traffic sources; the second source accounting for 29.0% of the total variance was distinguished as household and water supply pollution; the smallest of the three sources accounting for 16.2% of the total variance was defined as special industries such as leather tanning, textile manufacturing and chemical processing industries. Source apportionment of HMs in sewage sludge can control HM contamination through suggesting improvements in government policies and industrial processes. PMID:26690464

Evaluation and Source Apportionment of Heavy Metals (HMs) in Sewage Sludge of Municipal Wastewater Treatment Plants (WWTPs) in Shanxi, China.

PubMed

Duan, Baoling; Liu, Fenwu; Zhang, Wuping; Zheng, Haixia; Zhang, Qiang; Li, Xiaomei; Bu, Yushan

2015-12-11

Heavy metals (HMs) in sewage sludge have become the crucial limiting factors for land use application. Samples were collected and analyzed from 32 waste water treatment plants (WWTPs) in the Shanxi Province, China. HM levels in sewage sludge were assessed. The multivariate statistical method principal component analysis (PCA) was applied to identify the sources of HMs in sewage sludge. HM pollution classes by geochemical accumulation index I(geo) and correlation analyses between HMs were also conducted. HMs were arranged in the following decreasing order of mean concentration: Zn > Cu > Cr > Pb > As > Hg > Cd; the maximum concentrations of all HMs were within the limit of maximum content permitted by Chinese discharge standard. I(geo) classes of HMs pollution in order from most polluted to least were: Cu and Hg pollution were the highest; Cd and Cr pollution were moderate; Zn, As and Pb pollution were the least. Sources of HM contamination in sewage sludge were identified as three components. The primary contaminant source accounting for 35.7% of the total variance was identified as smelting industry, coking plant and traffic sources; the second source accounting for 29.0% of the total variance was distinguished as household and water supply pollution; the smallest of the three sources accounting for 16.2% of the total variance was defined as special industries such as leather tanning, textile manufacturing and chemical processing industries. Source apportionment of HMs in sewage sludge can control HM contamination through suggesting improvements in government policies and industrial processes.

Employment and Occupations in Europe in the 1980s. Effects of Technical and Economic Changes on the Employment Situation. Project No. 1 of the CCC: "Preparation for Life." Preparation for Working Life.

ERIC Educational Resources Information Center

Cacace, Nicole

This paper is an attempt to forecast for 1990 the following: (1) employment structures in the member countries of the Council of Europe for all three major sectors of the economy; and (2) employment structures in the Council of Europe for the nine major sectors of the manufacturing industry (food, textiles, leather and clothing, wood and…

In vitro cytotoxicity and genotoxicity of composite mixtures of natural rubber and leather residues used for textile applications.

PubMed

Cavalcante, Dalita Gsm; Gomes, Andressa S; Dos Reis, Elton Ap; Danna, Caroline S; Kerche-Silva, Leandra E; Yoshihara, Eidi; Job, Aldo E

2017-06-01

A novel composite material has been developed from natural rubber and leather waste, and a corresponding patent has been filed. This new material may be incorporated into textile and footwear products. However, as leather waste contains chromium, the biocompatibility of this new material and its safety for use in humans must be investigated. The aim of the present study was to investigate the presence of chromium in this new material, determine the amount of each form of chromium present (trivalent or hexavalent), and evaluate the potential cytotoxic and genotoxic effects of the novel composite in two cell lines. The cellular viability was quantified using the MTT3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide reduction method and neutral red uptake assay, and genotoxic damage was analyzed using the comet assay. Our findings indicated that the extracts obtained from the composite were severely cytotoxic to both cell lines tested, and additionally highly genotoxic to MRC-5 cells. These biological responses do not appear to be attributable to the presence of chromium, as the trivalent form was predominantly found to be present in the extracts, indicating that hexavalent chromium is not formed during the production of the novel composite. The incorporation of this new material in applications that do not involve direct contact with the human skin is thus indicated, and it is suggested that the chain of production of this material be studied in order to improve its biocompatibility so that it may safely be used in the textile and footwear industries.

Mobility and storage sinks for chromium and other metals in soils impacted by leather tannery wastes.

PubMed

Chen, Hualin; Arocena, Joselito M; Li, Jianbing; Thring, Ronald W; Zhou, Jiangmin

2012-12-01

Leather tanneries around the world, including China, introduce chromium (Cr) and other metals into the environment. In China, the population pressure compels the utilization of every piece of available land for food production. In this study, we investigated the content, leachability and possible storage sinks for Cr and other metals in soils around facilities of leather industry in southern China. It was found that Cr in soils impacted by tannery can be as high as 2484 mg Cr kg⁻¹ soil, and the mean contents of other metals such as Zn (214 mg Zn kg⁻¹ soil), Cd (5.4 mg Cd kg⁻¹ soil), As (17 mg As kg⁻¹ soil) exceeded the soil quality standards and guidelines in China and Canada. Simulated leaching studies (i.e., Synthetic Precipitation Leaching Procedure) indicated that these soils could release Cr and other metals in concentrations above the environmental quality guidelines and standards for water in China and Canada. As a result, the mobility of metals from these soils can potentially contaminate both groundwater and surface water. We also found differential leachability of metals with soil properties such as total metal and total carbon contents. Principal component analysis of the total contents of 32 elements showed that the possible major sinks for Cr are organic matter and oxides of Fe/Mn/Al, while sulfates and phosphates are potential storage of Cd, Zn, Cu and Pb. The information obtained from this study can be valuable for the restoration of ecosystem functions (i.e., food production) in the study area.

Polymer-assisted iron oxide magnetic nanoparticle immobilized keratinase

NASA Astrophysics Data System (ADS)

Konwarh, Rocktotpal; Karak, Niranjan; Rai, Sudhir Kumar; Mukherjee, Ashis Kumar

2009-06-01

Nanotechnology holds the prospect for avant-garde changes to improve the performance of materials in various sectors. The domain of enzyme biotechnology is no exception. Immobilization of industrially important enzymes onto nanomaterials, with improved performance, would pave the way to myriad application-based commercialization. Keratinase produced by Bacillus subtilis was immobilized onto poly(ethylene glycol)-supported Fe3O4 superparamagnetic nanoparticles. The optimization process showed that the highest enzyme activity was noted when immobilized onto cyanamide-activated PEG-assisted MNP prepared under conditions of 25 °C and pH 7.2 of the reaction mixture before addition of H2O2 (3% w/w), 2% (w/v) PEG6000 and 0.062:1 molar ratio of PEG to FeCl2·4H2O. Further statistical optimization using response surface methodology yielded an R2 value that could explain more than 94% of the sample variations. Along with the magnetization studies, the immobilization of the enzyme onto the PEG-assisted MNP was characterized by UV, XRD, FTIR and TEM. The immobilization process had resulted in an almost fourfold increase in the enzyme activity over the free enzyme. Furthermore, the immobilized enzyme exhibited a significant thermostability, storage stability and recyclability. The leather-industry-oriented application of the immobilized enzyme was tested for the dehairing of goat-skin.

Co-composting of hair waste from the tanning industry with de-inking and municipal wastewater sludges.

PubMed

Barrena, Raquel; Pagans, Estel la; Artola, Adriana; Vázquez, Felícitas; Sánchez, Antoni

2007-06-01

Production of waste hair in the leather manufacturing industry is increasing every year due to the adoption of hair-save unhairing techniques, leaving the tanners with the problem of coping with yet another solid by-product. Numerous potential strategies for hair utilisation have been proposed. However, the use of hair waste as agricultural fertiliser is one of its most promising applications due to the high nitrogen content of hair. Agricultural value of hair can be increased by composting. This paper deals with the composting of hair from the unhairing of bovine hide. Results indicated that hair cannot be either composted on its own or co-composted with de-inking sludge, a chemical complementary co-substrate. However, good results were obtained when co-composted with raw sludge from a municipal wastewater treatment plant at hair:raw sludge weight ratios 1:1, 1:2 and, 1:4 in lab scale and pilot plant scale composters. In all cases, a more stable product was achieved at the end of the process. Composting in the pilot plant composter was effectively monitored using Static Respiration Indices determined at process temperature at sampling (SRI(T)) and at 37 degrees C (SRI(37)). Notably, SRI(T) values were more sensitive to changes in the biological activity. In contrast, Respiratory Quotient (RQ) values were not adequate to follow the development of the process.

Production and characterization of thermostable alkaline protease of Bacillus subtilis (ATCC 6633) from optimized solid-state fermentation.

PubMed

Chatterjee, Joyee; Giri, Sudipta; Maity, Sujan; Sinha, Ankan; Ranjan, Ashish; Rajshekhar; Gupta, Suvroma

2015-01-01

Proteases are the most important group of enzymes utilized commercially in various arenas of industries, such as food, detergent, leather, dairy, pharmaceutical, diagnostics, and waste management, accounting for nearly 20% of the world enzyme market. Microorganisms of specially Bacillus genera serve as a vast repository of diverse set of industrially important enzymes and utilized for the large-scale enzyme production using a fermentation technology. Approximately 30%-40% of the cost of industrial enzymes originates from the cost of the growth medium. This study is attempted to produce protease from Bacillus subtilis (ATCC 6633) after optimization of various process parameters with the aid of solid-state fermentation using a cheap nutrient source such as wheat bran. B. subtilis (ATCC 6633) produces proteases of molecular weight 36 and 20 kDa, respectively, in the fermented medium as evident from SDS zymogram. Alkaline protease activity has been detected with optimum temperature at 50 °C and is insensitive to ethylenediaminetetraacetic acid. This thermostable alkaline protease exhibits dual pH optimum at 7 and 10 with moderate pH stability at alkaline pH range. It preserves its activity in the presence of detergent such as SDS, Tween 20, and Triton X-100 and may be considered as an effective additive to detergent formulation with some industrial importance. © 2014 International Union of Biochemistry and Molecular Biology, Inc.

Leather material found on a 6th B.C. Chinese bronze sword: A technical study

NASA Astrophysics Data System (ADS)

Luo, Wugan; Si, Yi; Wang, Hongmin; Qin, Ying; Huang, Fengchun; Wang, Changsui

2011-09-01

During July to November, 2006, an important archaeological excavation was conducted in Yun country, Hubei province, southern China. Chinese archaeologists found some remnant of leather materials, covered with red pigments, on a 6th century B.C. Chinese bronze sword. To understand the technology/ies that may have been utilized for manufacturing the leathers, a combined of Raman spectroscopy, FT-IR and XRF was thus applied to the remnant of leather materials. Raman analyses showed that red pigment on the leather was cinnabar (HgS). FT-IR and XRF analyses indicated that the content of some elements, such as Ca (existing as CaCO 3) and Fe (existing as Fe 2O 3), were much higher than those in the surrounding grave soil. The results inferred an application of lime depilation and retting, and the Fe-Al compound salt as tanning agent. And it was furthermore implicated that the Fe-Al salt tanning technique had been developed in the middle and late Spring and Autumn Period of China.

Experimental skin deposition of chromium on the hands following handling of samples of leather and metal.

PubMed

Bregnbak, David; Thyssen, Jacob P; Jellesen, Morten S; Zachariae, Claus; Johansen, Jeanne D

2016-08-01

Chromium is an important skin sensitizer. Exposure to it has been regulated in cement, and recently in leather. Studies on the deposition of chromium ions on the skin as a result of handling different chromium-containing materials are sparse, but could improve the risk assessment of contact sensitization and allergic contact dermatitis caused by chromium. To determine whether the handling of chromium-containing samples of leather and metal results in the deposition of chromium onto the skin. Five healthy volunteers participated. For 30 min, they handled samples of leather and metal known to contain and release chromium. Skin deposition of chromium was assessed with the acid wipe sampling technique. Acid wipe sampling of the participants' fingers showed chromium deposition on the skin in all participants who had been exposed to leather (range 0.01-0.20 µg/cm(2) ) and in 3 of 5 participants after they had manually handled metal discs (range 0.02-0.04 µg/cm(2) ). We found that samples of leather and metal had the ability to deposit chromium on the skin at significant levels, in spite of a short duration of exposure. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Chromium released from leather - II: the importance of environmental parameters.

PubMed

Mathiason, Frederik; Lidén, Carola; Hedberg, Yolanda S

2015-05-01

Approximately 1-3% of the adult population in Europe are allergic to chromium (Cr). A new restriction in Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) based on the ISO 17075 standard has recently been adopted in the EU to limit Cr(VI) in consumer and occupational leather products to < 3 mg/kg. To investigate the influence of storage conditions [relative humidity, temperature, ultraviolet (UV) irradiation, and duration] on Cr release, and to assess several parameters relevant for occupational exposure (repeated exposure, wear, alkaline solutions, and sequential wet and dry exposures). A leather of relevance for work gloves was investigated for its release of Cr(III) and Cr(VI) under these different experimental conditions. Relative humidity (water content in leather) during storage prior to Cr extraction was the single most important parameter. Cr(VI) levels could vary from non-detectable to levels significantly exceeding the restriction limit, depending on the relative humidity. Leather contact with alkaline solution and UV irradiation during storage could increase the Cr(VI) levels in subsequent extractions. The amount of Cr(VI) in leather is not an intrinsic property, but is influenced by environmental conditions of relevance for occupations and skin exposure. © 2015 The Authors. Contact Dermatitis published by John Wiley & Sons Ltd.

40 CFR 258.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; fertilizer/agricultural chemicals; food and related products/by-products; inorganic chemicals; iron and steel manufacturing; leather and leather products; nonferrous metals manufacturing/foundries; organic chemicals...

Occupational dermatoses: An Asian perspective.

PubMed

Bhatia, Riti; Sharma, Vinod Kumar

2017-01-01

Occupational dermatoses contribute to a significant portion of work-related diseases, especially in Asia, where a major portion of the workforce is in the unorganized sector. This review article is focussed on the frequency and pattern of occupational skin diseases reported across Asian countries and type of allergens implicated in different occupations. The literature was searched systematically using key words 'occupational dermatoses,' 'occupational skin disease' and name of each Asian country. Ninty five full-text articles were considered relevant and evaluated. Some of the dermatoses seen in industrial workers in Asian countries are similar to those in Western countries, including dermatoses due to chromate in construction and electroplating workers, epoxy resin, and chromate in painters, wood dust in workers in the furniture industry, azo dyes in textile workers and formaldehyde and chromates in those working in the leather and dyeing industries, dermatoses in domestic workers, chefs and health-care workers. Dermatoses in workers engaged in agriculture, beedi (tiny cigars) manufacture, agarbatti (incense sticks) production, fish processing, carpet weaving, sanitation and those working in coffee plantations and coal mines appear to be unique to Asian countries. Recognition of clinical patterns and geographic variations in occupational skin diseases will provide an impetus to further strengthen future research in these areas, as well as improving their management.

Cleaner processing: a sulphide-free approach for depilation of skins.

PubMed

Ranjithkumar, Ammasi; Durga, Jayanthi; Ramesh, Ramakrishnan; Rose, Chellan; Muralidharan, Chellappa

2017-01-01

The conventional unhairing process in leather making utilises large amount of lime and sodium sulphide which is hazardous and poses serious waste disposal concerns. Under acidic conditions, sodium sulphide liberates significant quantities of hydrogen sulphide which causes frequent fatal accidents. Further, the conventional unhairing process involves destruction of the hair leading to increased levels of biological oxygen demand (BOD), chemical oxygen demand (COD), total dissolved solids (TDS) and total suspended solids (TSS) in the effluent. A safe approach is needed to overcome such environmental and health problems through an eco-benign process. The present study deals with a clean technology in which the keratinous body is detached from the dermis using enzymes produced from Bacillus crolab MTCC 5468 by solid state fermentation (SSF) as an alternative to noxious chemicals. Complete unhairing of skin could be achieved with an enzyme concentration of 1.2 % (w/w). The bio-chemical parameters of the spent liquor of the enzymatic process were environmentally favourable when compared with conventional method. The study indicates that the enzymatic unhairing is a safe process which could be used effectively in leather processing to alleviate pollution and health problems.

[Upper limb work-related musculoskeletal disorders (UL-WMSDs): a retrospective cohort study in three large factories of the upholstered furniture industry].

PubMed

Nicoletti, S; Consonni, D; Carino, M; Di Leone, G; Trani, G; Battevi, N; Colombini, Daniela; Ambrosi, L

2008-01-01

The epidemiological evidence of work-related musculoskeletal disorders (UL-WMSDs) due to repetitive strain and movements in the various industries has been collected in the literature mainly through cross-sectional surveys. In particular there are no contributions so far regarding the upholstered furniture industry with a longitudinal design. The aim of the study was to evaluate the incidence rate of WMSDs such as hand-wrist and shoulder tendonitis, carpal tunnel syndrome, and epicondylitis in exposed workers of three large companies of the upholstered furniture industry in a large geographic area of southern Italy. The OCRA method, recommended by international standard ISO 11228-3 and EN 1005-5, was used for risk assessment. The following work tasks were considered:.filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. A total population of 5,278 subjects (exposed n=2927, controls n=2351) was investigated. The person/year at risk parameters were calculated from 1 January 2000, or from the date of engagement if later, until the first diagnosis of WMSD or, in absence of disorders, until the end of the study, i.e. 31 December 2004. Disorders occurring after the first were not considered. A multiple regression analysis was used to evaluate relationships between rates. Incidence rates correlated with risk classes of the OCRA index. An incidence rate of WMSDs higher than 1.2 cases per 100 person/year may be considered as a threshold value to suspect an occupational exposure to repetitive strain and movements warranting further investigation. The analysis of single factors did not show a greater predisposition of the female gender, with the single exception of the carpal tunnel syndrome (RR 2.92; 95% CI 1.57-5.43). Shoulder disorders affected mainly male leather-cutting operators (RR 4.97; 95% CI 2.03-12.16) and among all the factors influencing risk (frequency, force, posture, additional risk factors, pauses) posture seems to play a significant role.

Photoacoustic technique applied to the study of skin and leather

NASA Astrophysics Data System (ADS)

Vargas, M.; Varela, J.; Hernández, L.; González, A.

1998-08-01

In this paper the photoacoustic technique is used in bull skin for the determination of thermal and optical properties as a function of the tanning process steps. Our results show that the photoacoustic technique is sensitive to the study of physical changes in this kind of material due to the tanning process.

Enhancing the economic value and consumer preferences of commercial mondol stingray (Himantura gerardi) leather creative products

NASA Astrophysics Data System (ADS)

Sahubawa, L.; Pertiwiningrum, A.; Rahmadian, Y.

2018-03-01

The research objectives were to design, assess the economic value and consumer preference level of stingray leather products. The research method included a product design, analysis of economic value and consumer preferences. Mondol stingray (Himantura gerardi) leather, with a length of 50 cm and width of 30 cm, were processed into ID card wallet, man and women’s wallet and key holder. The number of respondents involved to analyze the preference level is 75 respondents (students, lecturers and employees of Universitas Gadjah Mada). Indicators of consumer preferences were model, color, price and purchasing power. The price of ID card wallet is Rp. 450,000; women wallet is Rp. 650,000 and a key holder is Rp. 300,000. Consumer preferences on ID card wallet were as follow: 84 % stated very interesting model; 83 % stated very interesting color; 61 % stated cheap and 53 % had enough. Consumer preferences of women’s wallet were as follow: 81 % stated very interesting model; 84 % stated very interesting color; 56 % stated cheap and 57 % had enough. Consumer preferences on key holder were as follow: 49 % stated interesting model; 72 % stated very interesting color; 61 % stated cheap and 57 % had enough.

[Comparative study of the performance of leather and plastic skate boots].

PubMed

Roy, B; Grenier, R

1982-03-01

The authors have tried to demonstrate the influence of leather skate boots and plastic boots on the performance of Atome hockey players. Speed tests and joint flexibility tests by means of rotentgenograms showed that besides the speed tests where the leather boot appeared to perform a little better than the plastic boot, no significant difference could be found between both types of boots. It seems to be more a matter of individual choice and adaptation.

Federal Specification MMM-A-1617B for Adhesive, Rubber-Base, General-Purpose HAP-Free Replacement

DTIC Science & Technology

2011-05-01

A-1617B Type-I adhesive (table 1) (5). This adhesive is a natural rubber and SBR combination recommended for bonding cotton duck, leather , felt...cotton duck, leather , felt, and cork to themselves, aluminum, steel, or natural rubber (5). Clifton FA-1051 low-HAP (experimental) adhesive is...oils. This adhesive bonds leather , nitrile rubber, most plastics, and gasketing materials to a variety of substrates. The carrier solvent is acetone

Characteristics of chromium-allergic dermatitis patients prior to regulatory intervention for chromium in leather: a questionnaire study.

PubMed

Bregnbak, David; Thyssen, Jacob P; Zachariae, Claus; Johansen, Jeanne D

2014-12-01

Chromium-tanned leather articles currently constitute the most important cause of contact allergy to chromium in Denmark. A regulation on the content of hexavalent chromium in leather was adopted in November 2013 by the EU member states. To characterize patients with chromium allergy and their disease, to serve as a baseline for future studies on the potential effect of the new regulation on chromium in leather. A questionnaire case-control study was performed on 155 dermatitis patients with positive patch test reactions to potassium dichromate and a matched control group of 621 dermatitis patients. Comparisons were made by use of a χ(2) -test and the Mann-Whitney U-test. Logistic regression analyses were used to test for associations. Sixty-six per cent of chromium-allergic patients had a positive history of contact dermatitis caused by leather exposure. They had a significantly lower quality of life (p < 0.001), a higher prevalence of dermatitis during the last year (p = 0.008), a higher use of medication during the past 12 months (p = 0.001) and a higher prevalence of sick leave (p = 0.007) than patients in the control group. Chromium-allergic patients have more severe and more chronic contact dermatitis. Their primary chromium exposure comes from leather articles. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Chromium(III) and chromium(VI) release from leather during 8 months of simulated use

PubMed Central

Lidén, Carola

2016-01-01

Summary Background Chromium (Cr) release from Cr‐tanned leather articles is a major cause of Cr contact dermatitis. It has been suggested that Cr(VI) release from leather is not necessarily an intrinsic property of the leather, but is strongly dependent on environmental conditions. Objectives To test this hypothesis for long‐term (8 months) simulated use. Materials and methods The release of total Cr and Cr(VI) from Cr‐tanned, unfinished leather was analysed in subsequent phosphate buffer (pH 8.0) immersions for a period of 7.5 months. The effect of combined ultraviolet treatment and alkaline solution (pH 12.1) was tested. Dry storage [20% relative humidity (RH)] was maintained between immersions. Atomic absorption spectroscopy, X‐ray fluorescence and diphenylcarbazide tests were used. Results Cr(VI) release was dependent on previous dry storage or alkaline treatment, but not on duration or number of previous immersions. Cr(III) release decreased with time. Fifty‐two percent of the total Cr released during the last immersion period was Cr(VI). Cr(VI) release exceeded 9 mg/kg in all immersion periods except in the first 10‐day immersion (2.6 mg/kg). Conclusions Cr(VI) release is primarily determined by environmental factors (RH prior to immersion, solution pH, and antioxidant content). The RH should be kept low prior to testing Cr(VI) release from leather. PMID:27144948

Textile Manufacturing Sector (NAICS 313)

EPA Pesticide Factsheets

Find environmental regulatory and compliance information for the textile and leather manufacturing sector, including NESHAPs for leather tanning and fabric printing, and small business guidance for RCRA hazardous waste requirements.

Leather material found on a 6th B.C. Chinese bronze sword: a technical study.

PubMed

Luo, Wugan; Si, Yi; Wang, Hongmin; Qin, Ying; Huang, Fengchun; Wang, Changsui

2011-09-01

During July to November, 2006, an important archaeological excavation was conducted in Yun country, Hubei province, southern China. Chinese archaeologists found some remnant of leather materials, covered with red pigments, on a 6th century B.C. Chinese bronze sword. To understand the technology/ies that may have been utilized for manufacturing the leathers, a combined of Raman spectroscopy, FT-IR and XRF was thus applied to the remnant of leather materials. Raman analyses showed that red pigment on the leather was cinnabar (HgS). FT-IR and XRF analyses indicated that the content of some elements, such as Ca (existing as CaCO3) and Fe (existing as Fe2O3), were much higher than those in the surrounding grave soil. The results inferred an application of lime depilation and retting, and the Fe-Al compound salt as tanning agent. And it was furthermore implicated that the Fe-Al salt tanning technique had been developed in the middle and late Spring and Autumn Period of China. Copyright © 2011 Elsevier B.V. All rights reserved.

40 CFR 63.5320 - How does my affected major source comply with the HAP emission standards?

Code of Federal Regulations, 2010 CFR

2010-07-01

... all times, including periods of startup, shutdown, and malfunction. (b) You must always operate and... record monthly the pounds of each type of finish applied for each leather product process operation and...

40 CFR 63.5320 - How does my affected major source comply with the HAP emission standards?

Code of Federal Regulations, 2011 CFR

2011-07-01

... all times, including periods of startup, shutdown, and malfunction. (b) You must always operate and... record monthly the pounds of each type of finish applied for each leather product process operation and...

Variable resistance constant tension and lubrication device. [using oil-saturated leather wiper

NASA Technical Reports Server (NTRS)

Smith, H. J. (Inventor)

1974-01-01

A variable resistance device is described which includes a cylindrical housing having elongated resistance wires. A movable arm having a supporting block carried on the outer end is rotatably carried by the cylindrical housing. An arcuate steel spring member is pivotally supported by the movable arm. A leather wiper member is carried adjacent to one end of the spring steel member, and an electrically conductive surface is carried adjacent to the other end. The supporting block maintains the spring steel member in compression so that a constant pressure is applied to the conductive end of the spring steel member and the leather wiper. The leather wiper is saturated with a lubricating oil for maintaining the resistance wire clean as the movable arm is manipulated.

Conversion of finished leather waste incorporated with plant fibers into value added consumer products - An effort to minimize solid waste in Ethiopia.

PubMed

Teklay, A; Gebeyehu, G; Getachew, T; Yaynshet, T; Sastry, T P

2017-10-01

Presently, the leftovers from leather product industries are discarded as waste in Ethiopia. The objective of the present study was therefore, to prepare composite sheets by incorporating various plant fibers like enset (Ensete ventricosum), hibiscus (Hibiscus cannabinus), jute (Corchorus trilocularis L.), palm (Phoenix dactylifera) and sisal (Agave sisal) in various proportions into the leather waste. Resin binder (RB) and natural rubber latex (NRL) were used as binding agents for the preparation of the composite sheets. The composite sheets prepared were characterized for their physicochemical properties (tensile strength, elongation at break, stitch tear strength, water absorption, water desorption and flexing strength). Composite sheets prepared using RB having 10% hibiscus, 20% palm and 40% sisal fibers showed better mechanical properties than their respective controls. In composite sheets prepared using NRL having 30% jute fiber exhibited better mechanical properties than its control. Most of the plant fibers used in this study played a role in increasing the performance of the sheets. However, as seen from the results, the contribution of these plant fibers on performance of the composite sheets prepared is dependent on the ratio used and the nature of binder. The SEM studies have exhibited the composite nature of the sheets and FTIR studies have shown the functional groups of collagen protein, cellulose and binders. The prepared sheets were used as raw materials for preparation of items like stiff hand bags, ladies' purse, keychain, chappal upper, wallet, wall cover, mouse pad and other interior decorating products. By preparing such value added products, we can reduce solid waste; minimize environmental pollution and thereby securing environmental sustainability. Copyright © 2017 Elsevier Ltd. All rights reserved.

Synergistic effects in the short-term preservation of hides with antiseptics and gamma radiation

NASA Astrophysics Data System (ADS)

Du Plessis, TA; Russell, AE; Stevens, RCB; Galloway, AC

The normal time lapse between the skinning and tanning processes of green hides necessitates the need for a short-term preservation technique to be employed. The most common method of bringing about such preservation is the coarse salting of the flesh side of hides. More recently the antiseptic treatment of hides was introduced to overcome the serious environmental pollution brought about by the salting process. The antiseptic treatment, however, must also be carefully controlled to avoid upsetting the biological breakdown processes in effluent plants. The gamma sterilization of such hides presents a non-polluting alternative to these methods. As the nature of this product demands excessively high radiation doses to be effective, which negatively influences the economics of the process and the physical properties of the resultant leather, a combination process employing radiation and antiseptics was investigated. It was observed that the radiation dose could be lowered from 50 kGy to 8 kGy in combination with certain antiseptics, whilst the required antiseptic concentration could be substantially lowered in the presence of radiation. The resultant leather was of an excellent quality whilst minimizing the environmental pollution problem.

40 CFR 425.80 - Applicability; description of the pigskin subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY Pigskin... into finished leather by chemically dissolving or pulping the hair and tanning with chrome, then retan...

40 CFR 425.70 - Applicability; description of the shearling subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY Shearling... cured sheep or sheep-like skins with the wool or hair retained into finished leather by chrome tanning...

Chromium(III) and chromium(VI) release from leather during 8 months of simulated use.

PubMed

Hedberg, Yolanda S; Lidén, Carola

2016-08-01

Chromium (Cr) release from Cr-tanned leather articles is a major cause of Cr contact dermatitis. It has been suggested that Cr(VI) release from leather is not necessarily an intrinsic property of the leather, but is strongly dependent on environmental conditions. To test this hypothesis for long-term (8 months) simulated use. The release of total Cr and Cr(VI) from Cr-tanned, unfinished leather was analysed in subsequent phosphate buffer (pH 8.0) immersions for a period of 7.5 months. The effect of combined ultraviolet treatment and alkaline solution (pH 12.1) was tested. Dry storage [20% relative humidity (RH)] was maintained between immersions. Atomic absorption spectroscopy, X-ray fluorescence and diphenylcarbazide tests were used. Cr(VI) release was dependent on previous dry storage or alkaline treatment, but not on duration or number of previous immersions. Cr(III) release decreased with time. Fifty-two percent of the total Cr released during the last immersion period was Cr(VI). Cr(VI) release exceeded 9 mg/kg in all immersion periods except in the first 10-day immersion (2.6 mg/kg). Cr(VI) release is primarily determined by environmental factors (RH prior to immersion, solution pH, and antioxidant content). The RH should be kept low prior to testing Cr(VI) release from leather. © 2016 The Authors. Contact Dermatitis published by John Wiley & Sons Ltd.

Removal of toxic Cr(VI) ions from tannery industrial wastewater using a newly designed three-phase three-dimensional electrode reactor

NASA Astrophysics Data System (ADS)

Grace Pavithra, K.; Senthil Kumar, P.; Carolin Christopher, Femina; Saravanan, A.

2017-11-01

In this research, the wastewater samples were collected from leather tanning industry at different time intervals. The parameters like pH, electrical conductivity, temperature, turbidity, chromium and chemical oxygen demand (COD) of the samples were analyzed. A three-phase three-dimensional fluidized type electrode reactor (FTER) was newly designed for the effective removal of toxic pollutants from wastewater. The influencing parameters were optimized for the maximum removal of toxic pollutants from wastewater. The optimum condition for the present system was calculated as: contact time of 30 min, applied voltage of 3 V and the particle electrodes of 15 g. The particle electrode was characterized by using FT-IR analysis. Langmuir-Hinshelwood and pseudo-second order kinetic models were fits well with the experimental data. The results showed that the FTER can be successfully employed for the treatment of industrial wastewater.

[Occupational hazards and bladder cancer].

PubMed

Nizamova, R S

1991-01-01

Occupational exposure to health hazards was studied in 258 industrial workers who had developed cancer of the bladder against 454 matched controls. All the test subjects and controls were residents of the Tambov Province centers of chemical industry. Statistical significance (relative risk-4.7) was established for exposure to aromatic amines. For those contacting with aniline dyes the relative risk (RR) made up 2.4. The risk to develop bladder cancer in powder shops (RR-3.2) was attributed to the hazards of dyes and diphenylamine. In leather-shoe and textile industry the exposure to dyes was not safe (RR-6.1), neither was it to chemicals, oil products, pesticides, overheating (RR-3.2, 1.6, 3.2 and 2.9, respectively). It is stated that in line with a significant risk to develop bladder cancer at exposure to aromatic amines there exist a number of occupational factors contributing to this risk.

Role of functional groups on Aspergillus niger biomass in the detoxification of hexavalent chromium.

PubMed

Narvekar, Sneha; Vaidya, Varsha K

2009-10-01

Chromium (VI) contamination is not uncommon, especially near industries involved in leather tanning, chrome painting, metal cleaning and processing, wood preservation and alloy preparation. The mutagenic and carcinogenic properties of Chromium (VI) necessitate effective remedial processes. Difficulties associated with chemical and physical techniques to remediate a Chromium (VI) contaminated site to EPA recommended level (50 ppm), in addition to higher costs involved, assert the need for bioremedial measures. Biosorption can be one such solution to clean up heavy metal contamination. The objective of this study was to examine the main aspects of a possible strategy for the removal of Chromium (VI), employing Aspergillus niger biomass. The roles played by amines, carboxylic acids, phosphates, in Chromium (VI) biosorption were studied. Amino and the carboxy groups on the fungal cell wall play an important role in sorption. However, the role of carboxy group was far less than amino group. Surface adsorption of Chromium (VI) was also seen by scanning electron microscopy (SEM) thus indicating involvement of ion-exchange and surface adsorption mechanism in removal of Chromium (VI) ions.

77 FR 18752 - Benzidine-Based Chemical Substances; Di-n

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... persons who intend to manufacture, import, or process these chemical substances for an activity that is.... Benzidine-based chemical substances. You may be potentially affected by this action if you manufacture... manufacturing, 313-textile manufacturers, 316-leather and allied products manufacturers, 322-paper manufacturers...

Evaluation of hides and leather using ultrasonic technology

USDA-ARS?s Scientific Manuscript database

Hides are visually inspected and ranked for quality and sale price. Because visual inspection is not reliable for detecting defects when hair is present, hides cannot be effectively sorted at the earliest stage of processing. Furthermore, this subjective assessment is non-uniform among operators, ...

40 CFR 425.60 - Applicability; description of the through-the-blue subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY... processes raw or cured cattle or cattle-like hides through the blue tanned state by hair pulp unhairing and chrome tanning; no retan-wet finishing is performed. ...

40 CFR 60.51 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., yard wastes, food wastes, plastics, leather, rubber, and other combustibles, and noncombustible... subpart A of this part. (a) Incinerator means any furnace used in the process of burning solid waste for the purpose of reducing the volume of the waste by removing combustible matter. (b) Solid waste means...

Potency of bio-charcoal briquette from leather cassava tubers and industrial sludge

NASA Astrophysics Data System (ADS)

Citrasari, Nita; Pinatih, Tety A.; Kuncoro, Eko P.; Soegianto, Agoes; Salamun, Irawan, Bambang

2017-06-01

The purpose of this study was to determine the quality of the bio-charcoal briquette with materials from leather cassava tubers and sludge of wastewater treatment plant. The first, bio-charcoal briquette analized stability test and compressive strength. Then, bio-charcoal briquette with best value analyzed for parameter including moisture content, ash content, calorific content, and burned test. The result briquette quality based on compressive strength for bio-charcoal briquettes carbonated water content between 3.8%-4.5% and non-carbonated bio-charcoal briquettes between 5.2%-7.6%. Bio-charcoal carbonation briquette ash content was between 5.30%-7.40% and non-carbonated bio-charcoal briquettes was between 6.86%-7.46%. Bio-charcoal carbonation levels briquettes heated between 578.2 calories/g-1837.7 calories/g and non carbonatedbio-charcoal briquettes between 858.1 calories/g-891.1 calories/g. Carbonated bio-charcoal burned test was between 48-63 minutes and non-carbonated bio-charcoal was between 22-42 minutes. Emissions resulted from the bio-charcoal briquettes for carbonated and non carbonated composition according to the government regulations ESDM No. 047 of 2006 which, at 128 mg/Nm3 and 139 mg/Nm3.

Characterization of Aspergillus fumigatus CAS-21 tannase with potential for propyl gallate synthesis and treatment of tannery effluent from leather industry.

PubMed

Cavalcanti, Rayza Morganna Farias; Jorge, João Atílio; Guimarães, Luis Henrique Souza

2018-06-01

One of the tannase isoforms produced by the fungus Aspergillus fumigatus CAS-21 under submerged fermentation (SbmF) was purified 4.9-fold with a 10.2% recovery. The glycoprotein (39.1% carbohydrate content) showed an estimated molecular mass of 60 kDa. Optimum temperature and pH for its activity were 30-40 °C and 5.0, respectively. It showed a half-life ( t 50 ) of 60 min at 45 and 50 °C, and it was stable at pH 5.0 and 6.0 for 3 h. The tannase activity was insensitive to most salts used, but it reduced in the presence of Fe 2 (SO 4 ) 3 and FeCl 3 . On contrary, in presence of SDS, Triton-X100, and urea the enzyme activity increased. The K m value indicated high affinity for propyl gallate (3.61 mmol L -1 ) when compared with tannic acid (6.38 mmol L -1 ) and methyl gallate (6.28 mmol L -1 ), but the best K cat (362.24 s -1 ) and K cat / K m (56.78 s -1 mmol -1 L) were obtained for tannic acid. The purified tannase reduced 89 and 25% of tannin content of the leather tannery effluent generated by manual and mechanical processing, respectively, after 2-h treatment. The total phenolic content was also reduced. Additionally, the enzyme produced propyl gallate, indicating its ability to do the transesterification reaction. Thus, A. fumigatus CAS-21 tannase presents interesting properties, especially the ability to degrade tannery effluent, highlighting its potential in biotechnological applications.

CO₂ Separation and Capture Properties of Porous Carbonaceous Materials from Leather Residues.

PubMed

Bermúdez, José M; Dominguez, Pablo Haro; Arenillas, Ana; Cot, Jaume; Weber, Jens; Luque, Rafael

2013-10-18

Carbonaceous porous materials derived from leather skin residues have been found to have excellent CO₂ adsorption properties, with interestingly high gas selectivities for CO₂ (α > 200 at a gas composition of 15% CO₂/85% N₂, 273K, 1 bar) and capacities (>2 mmol·g -1 at 273 K). Both CO₂ isotherms and the high heat of adsorption pointed to the presence of strong binding sites for CO₂ which may be correlated with both: N content in the leather residues and ultrasmall pore sizes.

Activated carbon from leather shaving wastes and its application in removal of toxic materials.

PubMed

Kantarli, Ismail Cem; Yanik, Jale

2010-07-15

In this study, utilization of a solid waste as raw material for activated carbon production was investigated. For this purpose, activated carbons were produced from chromium and vegetable tanned leather shaving wastes by physical and chemical activation methods. A detailed analysis of the surface properties of the activated carbons including acidity, total surface area, extent of microporosity and mesoporosity was presented. The activated carbon produced from vegetable tanned leather shaving waste produced has a higher surface area and micropore volume than the activated carbon produced from chromium tanned leather shaving waste. The potential application of activated carbons obtained from vegetable tanned shavings as adsorbent for removal of water pollutants have been checked for phenol, methylene blue, and Cr(VI). Adsorption capacities of activated carbons were found to be comparable to that of activated carbons derived from biomass. 2010 Elsevier B.V. All rights reserved.

Corporate carbon footprint for country Climate Change mitigation: A case study of a tannery in Turkey.

PubMed

Kılıç, Eylem; Puig, Rita; Zengin, Gökhan; Zengin, Candaş Adıgüzel; Fullana-I-Palmer, Pere

2018-09-01

Assessment of carbon emissions and environmental impact of production is indispensable to achieve a sustainable industrial production in Turkey, especially for those companies willing to compete in new international green markets. In this case study, corporate carbon footprint of a representative Turkish tanning company was analyzed. Inventory and impact data are presented to help in the environmental decision-making process. The results indicate that significant environmental impacts were caused during the landfilling of solid wastes as well as the production of the electricity and fuel required in the tannery. Turkish tannery inventory data presented here for the first time will be useful for leather tanning company managers to calculate sustainability key indicators. Improving alternatives at country level were identified (increasing the renewable sources on electricity production and promote energy recovery in landfills) which would be useful not only to decrease greenhouse gas (GHG) emissions of tanning sector but also of other industries requiring electricity and producing organic wastes. Considering the substantial contribution of industrial processes to the Turkish carbon emissions (15.7%) (TUIK, 2013), work done on those areas would provide a sound improvement in environmental profile of Turkey. The importance to promote a national strategy to reduce GHG emissions in Turkey was discussed here, as well as its relation to corporate carbon footprint assessments. One of the significant points revealed from the case study is the lack of published country specific emission factors for Turkey, which is a fundamental prerequisite to promote corporate carbon footprint assessment within the country. Copyright © 2018 Elsevier B.V. All rights reserved.

Radiation induced graft copolymerization of methyl methacrylate onto chrome-tanned pig skins

NASA Astrophysics Data System (ADS)

Pietrucha, K.; Pȩkala, W.; Kroh, J.

Graft copolymerization of methyl methacrylate (MMA) onto chrome-tanned pig skins was carried out by the irradiation with 60Co ?-rays. The grafted polymethyl methacrylate (PMMA) chains were isolated by acid hydrolysis of the collagen backbone in order to characterize the graft copolymers. Proof of grafting was obtained through the detection of amino acid endgroups in the isolated grafts by reaction with ninhydrin. The grafting yield of MMA in aqueous emulsion was found to be higher than that for pure MMA and MMA in acetone. The degree of grafting increases with increasing monomer concentration in emulsion and reaches maximum at radiation dose ca 15 kGy. The yield of grafting is very high - ca 90% of monomer converts into copolymer and only 10% is converted into homopolymer. The present paper reports the physical properties of chrome-tanned pig skins after graft polymerization with MMA in emulsion. Modified leathers are more resistant against water absorption and abrasion in comparison with unmodified ones. They have more uniform structure over the whole surface, greater thickness and stiffness. The results reported seem to indicate that MMA may be used in the production of shoe upper and sole leathers. The mechanism of some of the processes occuring during radiation grafting of MMA in water emulsion on tanned leathers has been also suggested and discussed.

Valorization of solid wastes from chestnut industry processing: Extraction and optimization of polyphenols, tannins and ellagitannins and its potential for adhesives, cosmetic and pharmaceutical industry.

PubMed

Aires, Alfredo; Carvalho, Rosa; Saavedra, Maria José

2016-02-01

The aim of the current study was to evaluate the potential of chestnut peels to produce pomaces enhanced with tannins to be used in the formulations of wood adhesives, leather tanning or as natural antioxidants in food, cosmetic and pharmaceutical industry. An analytical procedure was planned as 2 factorial design to analyze the influence of solvent (water, Na2SO3 and NaOH at different concentrations of 1, 2, 4, and 8% in water) and extraction time (30, 60, and 120, 240, 480 and 960min) on extraction yield, pH, Stiasny index, and tannins. HPLC-diode array detector equipped with an ionization mass spectrophotometer was used to assess the polyphenol composition. Our results showed that both extraction properties and phytochemicals were significantly affected (P<0.001) by all independent factors. The main tannins identified were the hydrolyzable gallic acid, vescalagin castalagin and ellagic acid, and the condensed epigallocatechin, catechin and epicatechin. The solvent 1% Na2SO3 was more effective to extract the condensed tannins whilst hydrolyzable tannins were extracted efficiently by 1% NaOH. The multivariable analysis and the Pearson's correlation coefficients showed a direct association between Stiasny number and the average levels of condensed tannins. Copyright © 2015 Elsevier Ltd. All rights reserved.

Immunological pattern alteration in shoe, hide, and leather industry workers exposed to hexavalent chromium.

PubMed

Mignini, Fiorenzo; Tomassoni, Daniele; Traini, Enea; Vitali, Mario; Scuri, Stefania; Baldoni, Emilia; Grappasonni, Iolanda; Cocchioni, Mario

2009-12-01

The aim of this work was to assess the effects of hexavalent chromium [Cr(VI)] on shoe, leather, and hide industry workers, based on the assumption that Cr(VI) can behave as an environmental immunological "stressor." The immunological patterns of 84 male subjects were studied in relation to Cr(VI) hematic and urinary levels. Cr(VI) was measured through atomic absorption. Lymphocyte subsets, mitogen-mediated lymphocyte-proliferation, cytokine levels, and natural killer (NK) cytotoxic activity were also assayed. The urinary levels of the total amount of Cr(VI) were significantly higher in a subgroup of exposed subjects (group B) than in the control or in the lower exposed (group A). In group B, Cr(VI) caused a decrease in the density of glucocorticoid receptors (GR) on peripheral blood mononuclear cells (PBMC) and a increase of IL-6. Cr(VI) did not modify NK-mediated cytotoxicity, the plasmatic levels of inflammatory cytokines and related soluble receptors, and prostaglandin levels, while it tended to increase lymphocyte sensitivity to mitogens and the production of immunomodulant cytokines (IFN-gamma, IL-4, and IL-2). The experimental addition of Cr(VI) to the in vitro lymphocyte culture determined a significant inhibition of phagocytosis percentage, index, and killing percentage. These effects were neutralized by exogenous IFN-gamma. Cr(VI) could represent an environmental immunological stressor whose effects can be evaluated through laboratory surveys. The lymphocyte mitogen-induced proliferation, GR receptor on PBMC, and IL-6 plasma levels may represent a discriminating element between Cr(VI)-induced stress and other kinds of stress.

Preparation and evaluation of tara-modified proteins

USDA-ARS?s Scientific Manuscript database

Quebracho, a vegetable tannin, can be used to modify gelatin to produce a product that has been applied effectively as a filler in leather processing, as described in our previous report. In this ongoing study, another vegetable tannin tara is examined for its possible application in protein modifi...

40 CFR 425.50 - Applicability; description of the no beamhouse subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY No... cattle hides, sheepskins, or splits (hair previously removed and pickled) into finished leather by chrome or non-chrome tanning, and retan-wet finishing. ...

Current status of trace metal pollution in soils affected by industrial activities.

PubMed

Kabir, Ehsanul; Ray, Sharmila; Kim, Ki-Hyun; Yoon, Hye-On; Jeon, Eui-Chan; Kim, Yoon Shin; Cho, Yong-Sung; Yun, Seong-Taek; Brown, Richard J C

2012-01-01

There is a growing public concern over the potential accumulation of heavy metals in soil, owing to rapid industrial development. In an effort to describe the status of the pollutions of soil by industrial activities, relevant data sets reported by many studies were surveyed and reviewed. The results of our analysis indicate that soils were polluted most significantly by metals such as lead, zinc, copper, and cadmium. If the dominant species are evaluated by the highest mean concentration observed for different industry types, the results were grouped into Pb, Zn, Ni, Cu, Fe, and As in smelting and metal production industries, Mn and Cd in the textile industry, and Cr in the leather industry. In most cases, metal levels in the studied areas were found to exceed the common regulation guideline levels enforced by many countries. The geoaccumulation index (I(geo)), calculated to estimate the enrichment of metal concentrations in soil, showed that the level of metal pollution in most surveyed areas is significant, especially for Pb and Cd. It is thus important to keep systematic and continuous monitoring of heavy metals and their derivatives to manage and suppress such pollution.

Current Status of Trace Metal Pollution in Soils Affected by Industrial Activities

PubMed Central

Kabir, Ehsanul; Ray, Sharmila; Kim, Ki-Hyun; Yoon, Hye-On; Jeon, Eui-Chan; Kim, Yoon Shin; Cho, Yong-Sung; Yun, Seong-Taek; Brown, Richard J. C.

2012-01-01

There is a growing public concern over the potential accumulation of heavy metals in soil, owing to rapid industrial development. In an effort to describe the status of the pollutions of soil by industrial activities, relevant data sets reported by many studies were surveyed and reviewed. The results of our analysis indicate that soils were polluted most significantly by metals such as lead, zinc, copper, and cadmium. If the dominant species are evaluated by the highest mean concentration observed for different industry types, the results were grouped into Pb, Zn, Ni, Cu, Fe, and As in smelting and metal production industries, Mn and Cd in the textile industry, and Cr in the leather industry. In most cases, metal levels in the studied areas were found to exceed the common regulation guideline levels enforced by many countries. The geoaccumulation index (I geo), calculated to estimate the enrichment of metal concentrations in soil, showed that the level of metal pollution in most surveyed areas is significant, especially for Pb and Cd. It is thus important to keep systematic and continuous monitoring of heavy metals and their derivatives to manage and suppress such pollution. PMID:22645468

Models of verbal working memory capacity: what does it take to make them work?

PubMed

Cowan, Nelson; Rouder, Jeffrey N; Blume, Christopher L; Saults, J Scott

2012-07-01

Theories of working memory (WM) capacity limits will be more useful when we know what aspects of performance are governed by the limits and what aspects are governed by other memory mechanisms. Whereas considerable progress has been made on models of WM capacity limits for visual arrays of separate objects, less progress has been made in understanding verbal materials, especially when words are mentally combined to form multiword units or chunks. Toward a more comprehensive theory of capacity limits, we examined models of forced-choice recognition of words within printed lists, using materials designed to produce multiword chunks in memory (e.g., leather brief case). Several simple models were tested against data from a variety of list lengths and potential chunk sizes, with test conditions that only imperfectly elicited the interword associations. According to the most successful model, participants retained about 3 chunks on average in a capacity-limited region of WM, with some chunks being only subsets of the presented associative information (e.g., leather brief case retained with leather as one chunk and brief case as another). The addition to the model of an activated long-term memory component unlimited in capacity was needed. A fixed-capacity limit appears critical to account for immediate verbal recognition and other forms of WM. We advance a model-based approach that allows capacity to be assessed despite other important processing contributions. Starting with a psychological-process model of WM capacity developed to understand visual arrays, we arrive at a more unified and complete model. Copyright 2012 APA, all rights reserved.

Models of Verbal Working Memory Capacity: What Does It Take to Make Them Work?

PubMed Central

Cowan, Nelson; Rouder, Jeffrey N.; Blume, Christopher L.; Saults, J. Scott

2013-01-01

Theories of working memory (WM) capacity limits will be more useful when we know what aspects of performance are governed by the limits and what aspects are governed by other memory mechanisms. Whereas considerable progress has been made on models of WM capacity limits for visual arrays of separate objects, less progress has been made in understanding verbal materials, especially when words are mentally combined to form multi-word units or chunks. Toward a more comprehensive theory of capacity limits, we examine models of forced-choice recognition of words within printed lists, using materials designed to produce multi-word chunks in memory (e.g., leather brief case). Several simple models were tested against data from a variety of list lengths and potential chunk sizes, with test conditions that only imperfectly elicited the inter-word associations. According to the most successful model, participants retained about 3 chunks on average in a capacity-limited region of WM, with some chunks being only subsets of the presented associative information (e.g., leather brief case retained with leather as one chunk and brief case as another). The addition to the model of an activated long-term memory (LTM) component unlimited in capacity was needed. A fixed capacity limit appears critical to account for immediate verbal recognition and other forms of WM. We advance a model-based approach that allows capacity to be assessed despite other important processing contributions. Starting with a psychological-process model of WM capacity developed to understand visual arrays, we arrive at a more unified and complete model. PMID:22486726

Otzi, the iceman and his leather clothes.

PubMed

Püntener, Alois G; Moss, Serge

2010-01-01

Over 5000 years ago, a man climbed up to the icy heights of the glacier in South Tyrol, Italy and died. He was found by accident in 1991, with his clothes and equipment, mummified and frozen: an archaeological sensation and a unique snapshot of a Copper Age man. For several years highly specialised research teams have examined the mummy and all accompanying items. This paper describes how fur and leather clothes of the iceman could have been tanned. Details of the analytical tests undertaken on the 5000 year old leather samples and what they revealed are presented.

CO2 Separation and Capture Properties of Porous Carbonaceous Materials from Leather Residues

PubMed Central

Bermúdez, José M.; Dominguez, Pablo Haro; Arenillas, Ana; Cot, Jaume; Weber, Jens; Luque, Rafael

2013-01-01

Carbonaceous porous materials derived from leather skin residues have been found to have excellent CO2 adsorption properties, with interestingly high gas selectivities for CO2 (α > 200 at a gas composition of 15% CO2/85% N2, 273K, 1 bar) and capacities (>2 mmol·g−1 at 273 K). Both CO2 isotherms and the high heat of adsorption pointed to the presence of strong binding sites for CO2 which may be correlated with both: N content in the leather residues and ultrasmall pore sizes. PMID:28788352

The leather ankle lacer.

PubMed Central

Saltzman, C. L.; Shurr, D.; Kamp, J.; Cook, T. A.

1995-01-01

The purpose of this study was to evaluate the efficacy of a leather ankle lacer for treating painful problems of the ankle and hindfoot. The evaluation involved patient self assessment, clinical examination and radiographic determination of the effectiveness of the ankle lacer. Overall, patients had moderate pain relief with significant but not complete restriction of motion. Based on this study and our clinical experience, we find the leather ankle lacer to be a compliant and comfortable treatment strategy for patients with painful ankle and hindfoot problems who desire some retained motion. Images Figure 1A & B Figure 2 Figure 3 PMID:7634034

Hot Water Extract of Leather Carp (Cyprinus carpio nudus) Improves Exercise Performance in Mice

PubMed Central

Lee, Gong-Hyeon; Harwanto, Dicky; Park, Sun-Mee; Choi, Jae-Suk; Kim, Mi-Ryung; Hong, Yong-Ki

2015-01-01

The hot water extract of leather carp (Cyprinus carpio nudus) has been used as a nourishing tonic soup and as an aid for recovery from physical fatigue. In this study, we investigated the effect of leather carp extract on exercise performance in mice. Swimming endurance and forelimb grip strength were assessed following oral administration of the extract (once per day for 7 days) at a dose of 0.5 mg/10 μL/g body weight. After 7 days, mice given the leather carp extract had significantly greater swimming endurance [105±18 s (P<0.05); 52% longer than day 0] and forelimb grip strength [1.18±0.05 Newton (P<0.01); 17% greater than day 0]. The extract increased muscle mass, but had little effect on body weight. Following the swimming exercise, blood glucose, glutathione peroxidase, and superoxide dismutase levels in extract-fed mice were significantly higher (145%, 131%, and 106%, respectively) than in the saline control group. Blood levels of high-density lipoprotein cholesterol were also significantly increased (128%) in mice given the extract compared to the controls. These results suggest that leather carp extract can improve physical exercise performance and prevent oxidative stress caused by exhaustive workouts. PMID:26770911

Chromium released from leather – I: exposure conditions that govern the release of chromium(III) and chromium(VI)

PubMed Central

Hedberg, Yolanda S; Lidén, Carola; Odnevall Wallinder, Inger

2015-01-01

Background Approximately 1–3% of the adult population in Europe is allergic to chromium (Cr). A new restriction in REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) based on the ISO 17075 standard has recently been adopted in the EU to limit Cr(VI) in consumer and occupational leather products. Objectives The aim of this study was to critically assess key experimental parameters in this standard on the release of Cr(III) and Cr(VI) and their relevance for skin exposure. Material and methods Four differently tanned, unfinished, leather samples were systematically investigated for their release of Cr(III) and Cr(VI) in relation to surface area, key exposure parameters, temperature, ultraviolet irradiation, and time. Results Although the total release of Cr was largely unaffected by all investigated parameters, except exposure duration and temperature, the Cr oxidation state was highly dynamic, with reduced amounts of released Cr(VI) with time, owing to the simultaneous release of reducing agents from the leather. Significantly more Cr(III) than Cr(VI) was released from the Cr-tanned leather for all conditions tested, and it continued to be released in artificial sweat up to at least 1 week of exposure. Conclusions Several parameters were identified that influenced the outcome of the ISO 17075 test. PMID:25653094

Leather quality of beefalo-Nellore cattle in different production systems.

PubMed

Ítavo, Luís Carlos Vinhas; Mateus, Rodrigo Gonçalves; Ítavo, Camila Celeste Brandão Ferreira; Dias, Alexandre Menezes; Gomes, Fabio Candal; da Silva, Fabiano Ferreira; Schio, Alex Resende; Nogueira, Eriklis; Petit, Hélène Véronique

2017-05-01

The aim was to compare the effects of two production systems on performance, carcass traits and physical-mechanical characteristics of leather from Beefalo-Nellore steers and heifers and to determine if the response to the production system was similar for both genders. A total of 40 Beefalo-Nellore cattle, 20 steers and 20 heifers, were evaluated. Animals were divided into two production systems: slaughtered at 15 (intensive system) or 26 (extensive system) months of age. In the intensive system, all animals received a ration containing 600 g/kg corn silage and 400 g/kg concentrate. In the extensive system, animals were kept on a pasture predominantly based on Brachiaria sp. and supplemented with 2 kg/day concentrate. In the intensive system, there was no difference in slaughter weight (470 kg body weight) between steers and heifers but steers in the extensive system had greater slaughter weight than heifers (463 and 428 kg body weight, respectively). Leather weight was higher for animals in the intensive than extensive system but there was no difference in leather weight once excess fat was removed. Leather quality from Beefalo-Nellore cattle slaughtered at 15 or 26 months of age is similar although carcass yield is higher for cattle slaughtered at a younger age. © 2016 Japanese Society of Animal Science.

Preparation and characterization of gelatin/chitosan/carbodiimide films

USDA-ARS?s Scientific Manuscript database

In prior studies, we examined the effects of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and water-dispersible polycarbodiimides (pCDIs) on the properties of gels produced from gelatin and a gelatin/chitosan blend that may be suitable for a role in leather processing. Those studies showed m...

Treatment of wet blue with fillers produced from quebracho-modified gelatin

USDA-ARS?s Scientific Manuscript database

Gelatin modified with quebracho to produce high molecular weight, high viscosity products was investigated as a filler in leather processing. The uptake of quebracho/gelatin product by the wet blue was on the average about 55% of the 10% gelatin/quebracho product offered; the reaction appeared to be...

Environmental Compliance Assessment System (ECAS). North Carolina Supplement

DTIC Science & Technology

1994-09-01

specified. 1-2 *Drvcleaning - a process for the cleaning of textiles and fabric products in which articles are washed in a nonaqueous solution...piping and valves. " Dryer - a machine used to remove petroleum solvent from articles of clothing or other textile or leather goods, after washing and...Tobacco Processing 2200-2299 Textile Processing 2400-2499 Lumber and Wood Products Except 7, cure 2500-2599 Manufacturing of Furniture and F, i 2600

The quest for a comprehensive tanning mechanism

USDA-ARS?s Scientific Manuscript database

The conversion of animal hides into leather was one of mankind’s earliest ventures into biomaterial engineering. The methods for production of leather have evolved over many centuries as art and engineering with little understanding of the underlying science. Through empirical methods, several cla...

Airborne ultrasonic inspection of hides and leather

USDA-ARS?s Scientific Manuscript database

Currently, hides and leather are visually inspected and ranked for quality, sale price and usable area. Visual inspection is not reliable for detecting defects, which are usually hidden inside the material. This manual assessment is non-uniform among operators, and often leads to disputes over fai...

Model evaluation of temperature dependency for carbon and nitrogen removal in a full-scale activated sludge plant treating leather-tanning wastewater.

PubMed

Görgün, Erdem; Insel, Güçlü; Artan, Nazik; Orhon, Derin

2007-05-01

Organic carbon and nitrogen removal performance of a full-scale activated sludge plant treating pre-settled leather tanning wastewater was evaluated under dynamic process temperatures. Emphasis was placed upon observed nitrogen removal depicting a highly variable magnitude with changing process temperatures. As the plant was not specifically designed for this purpose, observed nitrogen removal could be largely attributed to simultaneous nitrification and denitrification presumably occurring at increased process temperatures (T>25 degrees C) and resulting low dissolved oxygen levels (DO<0.5 mgO2/L). Model evaluation using long-term data revealed that the yearly performance of activated sludge reactor could be successfully calibrated by means of temperature dependent parameters associated with nitrification, hydrolysis, ammonification and endogenous decay parameters. In this context, the Arrhenius coefficients of (i) for the maximum autotrophic growth rate, [image omitted]A, (ii) maximum hydrolysis rate, khs and (iii) endogenous heterotrophic decay rate, bH were found to be 1.045, 1.070 and 1.035, respectively. The ammonification rate (ka) defining the degradation of soluble organic nitrogen could not be characterized however via an Arrhenius-type equation.

Molecular modeling approach to vegetable tanning: preliminary results for gallotannin interactions with the collagen microfibril

USDA-ARS?s Scientific Manuscript database

Tanning of animal hides produces leather, a durable, flexible material that is stabilized against putrefaction. Chrome-tanned wet blue, aldehyde crosslinked wet white, and vegetable tanned hides are major contributors to current leather production. Although the chemistries involved are significant...

16 CFR 24.1 - Deception (general).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Deception (general). 24.1 Section 24.1 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR SELECT LEATHER AND IMITATION LEATHER PRODUCTS § 24.1 Deception (general). It is unfair or deceptive to misrepresent, directly...

Nanomaterials for the cleaning and pH adjustment of vegetable-tanned leather

NASA Astrophysics Data System (ADS)

Baglioni, Michele; Bartoletti, Angelica; Bozec, Laurent; Chelazzi, David; Giorgi, Rodorico; Odlyha, Marianne; Pianorsi, Diletta; Poggi, Giovanna; Baglioni, Piero

2016-02-01

Leather artifacts in historical collections and archives are often contaminated by physical changes such as soiling, which alter their appearance and readability, and by chemical changes which occur on aging and give rise to excessive proportion of acids that promote hydrolysis of collagen, eventually leading to gelatinization and loss of mechanical properties. However, both cleaning and pH adjustment of vegetable-tanned leather pose a great challenge for conservators, owing to the sensitivity of these materials to the action of solvents, especially water-based formulations and alkaline chemicals. In this study, the cleaning of historical leather samples was optimized by confining an oil-in-water nanostructured fluid in a highly retentive chemical hydrogel, which allows the controlled release of the cleaning fluid on sensitive surfaces. The chemical gel exhibits optimal viscoelasticity, which facilitates its removal after the application without leaving residues on the object. Nanoparticles of calcium hydroxide and lactate, dispersed in 2-propanol, were used to adjust the pH up to the natural value of leather, preventing too high alkalinity which causes swelling of fibers and denaturation of the collagen. The treated samples were characterized using scanning electron microscopy, controlled environment dynamic mechanical analysis, and infrared spectroscopy. The analytical assessment validated the use of tools derived from colloid and materials science for the preservation of collagen-based artifacts.

Chromium released from leather - I: exposure conditions that govern the release of chromium(III) and chromium(VI).

PubMed

Hedberg, Yolanda S; Lidén, Carola; Odnevall Wallinder, Inger

2015-04-01

Approximately 1-3% of the adult population in Europe is allergic to chromium (Cr). A new restriction in REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) based on the ISO 17075 standard has recently been adopted in the EU to limit Cr(VI) in consumer and occupational leather products. The aim of this study was to critically assess key experimental parameters in this standard on the release of Cr(III) and Cr(VI) and their relevance for skin exposure. Four differently tanned, unfinished, leather samples were systematically investigated for their release of Cr(III) and Cr(VI) in relation to surface area, key exposure parameters, temperature, ultraviolet irradiation, and time. Although the total release of Cr was largely unaffected by all investigated parameters, except exposure duration and temperature, the Cr oxidation state was highly dynamic, with reduced amounts of released Cr(VI) with time, owing to the simultaneous release of reducing agents from the leather. Significantly more Cr(III) than Cr(VI) was released from the Cr-tanned leather for all conditions tested, and it continued to be released in artificial sweat up to at least 1 week of exposure. Several parameters were identified that influenced the outcome of the ISO 17075 test. © 2015 The Authors. Contact Dermatitis published by John Wiley & Sons Ltd.

ACCEPTANCE OF FUNCTIONAL FOOD AMONG CHILEAN CONSUMERS: APPLE LEATHER.

PubMed

van Vliet, Maya; Adasme-Berrios, Cristian; Schnettler, Berta

2015-10-01

the aim of this study is to measure acceptance of a specific functional food: apple (fruit) leather, based on organoleptic characteristics and to identify consumer types and preferences for natural additives which increase the product's functionality and meet current nutritional needs. a sample of 800 consumers provided an evaluation of apple leather in terms of acceptance (liking). A sensorial panel was carried out using a 9-point hedonic scale. Cluster analysis was used to identify different acceptance-based consumer types. In addition, a conjoint analysis was carried out to determine preference for different additives. the cluster analysis resulted in four groups with significant differences in the average likings obtained from the sensory panel. Results indicate that the sweetness of the tested apple leather was evaluated best among all groups and, on average, color was rated as the worst attribute. However, overall likings differ significantly between groups. Results from the conjoint analysis indicate that, in general, consumers prefer natural additives included in the product which enhance functionality. although there is a "global acceptance" of the product, there are significant differences between groups. The results of the conjoint analysis indicate that, in general, consumers prefer the aggregation of natural additives which increase the product's functionality. Apple leather with natural additives, such as anticariogenics and antioxidants, can be considered a functional substitute of unhealthy snacks and/or sweets. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Chromium(VI) release from leather and metals can be detected with a diphenylcarbazide spot test.

PubMed

Bregnbak, David; Johansen, Jeanne D; Jellesen, Morten S; Zachariae, Claus; Thyssen, Jacob P

2015-11-01

Along with chromium, nickel and cobalt are the clinically most important metal allergens. However, unlike for nickel and cobalt, there is no validated colorimetric spot test that detects chromium. Such a test could help both clinicians and their patients with chromium dermatitis to identify culprit exposures. To evaluate the use of diphenylcarbazide (DPC) as a spot test reagent for the identification of chromium(VI) release. A colorimetric chromium(VI) spot test based on DPC was prepared and used on different items from small market surveys. The DPC spot test was able to identify chromium(VI) release at 0.5 ppm without interference from other pure metals, alloys, or leather. A market survey using the test showed no chromium(VI) release from work tools (0/100). However, chromium(VI) release from metal screws (7/60), one earring (1/50), leather shoes (4/100) and leather gloves (6/11) was observed. We found no false-positive test reactions. Confirmatory testing was performed with X-ray fluorescence (XRF) and spectrophotometrically on extraction fluids. The use of DPC as a colorimetric spot test reagent appears to be a good and valid test method for detecting the release of chromium(VI) ions from leather and metal articles. The spot test has the potential to become a valuable screening tool. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Antibacterial activity of silver nanoparticle-coated fabric and leather against odor and skin infection causing bacteria.

PubMed

Velmurugan, Palanivel; Lee, Sang-Myeong; Cho, Min; Park, Jung-Hee; Seo, Sang-Ki; Myung, Hyun; Bang, Keuk-Soo; Oh, Byung-Taek

2014-10-01

We present a simple, eco-friendly synthesis of silver and gold nanoparticles using a natural polymer pine gum solution as the reducing and capping agent. The pine gum solution was combined with silver nitrate (AgNO3) or a chloroauric acid (HAuCl4) solution to produce silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), respectively. The reaction process was simple; formation of the nanoparticles was achieved by autoclaving the silver and gold ions with the pine gum. UV-Vis spectra showed surface plasmon resonance (SPR) for silver and gold nanoparticles at 432 and 539 nm, respectively. The elemental forms of AgNPs and AuNPs were confirmed by energy-dispersive X-ray spectroscopy (EDX). Fourier transform infrared spectroscopy (FTIR) showed the biomolecules present in the pine gum, AgNPs, and AuNPs. Transmission electron microscopy (TEM) images showed the shape and size of AgNPs and AuNPs. The crystalline nature of synthesized AgNPs and AuNPs was confirmed by X-ray crystallography [X-ray diffraction (XRD)]. Application of synthesized AgNPs onto cotton fabrics and leather, in order to evaluate their antibacterial properties against odor- or skin infection-causing bacteria, is also discussed. Among the four tested bacteria, AgNP-coated cotton fabric and leather samples displayed excellent antibacterial activity against Brevibacterium linens.

40 CFR 63.5415 - What notifications must I submit and when?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Finishing Operations NESHAP, and compliance date. (4) A brief description of the source including the types...) and (2), if you startup your new or reconstructed affected source on or after February 27, 2002, you.... (3) Each type of leather product process operation performed during the previous 12 months. (4) Each...

40 CFR 63.5415 - What notifications must I submit and when?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Finishing Operations NESHAP, and compliance date. (4) A brief description of the source including the types...) and (2), if you startup your new or reconstructed affected source on or after February 27, 2002, you.... (3) Each type of leather product process operation performed during the previous 12 months. (4) Each...

Investigation on the efficiency of treated Palm Tree waste for removal of organic pollutants

NASA Astrophysics Data System (ADS)

Azoulay, Karima; El HajjajiI, Souad; Dahchour, Abdelmalek

2017-04-01

Development of the industrial sector generates several problems of environmental pollution. This issue rises concern among scientific community and decision makers, in this work; we e interested in water resources polluted by the chemical substances, which can cause various problems of health. As an example, dyes generated by different industrial activities such as textile, cosmetic, metal plating, leather, paper and plastic sectors, constitute an important source of pollution. In this work, we aim at investigating the efficiency of palm tree waste for removal of dyes from polluted solution. Our work presents a double environmental aspect, on one hand it constitutes an attempt for valorization of Palm Tree waste, and on the other hand it provides natural adsorbent. The study focuses on the effectiveness of the waste in removing Methylene Bleu and Methyl Orange taken as models of pollutants from aqueous solution. Kinetics and isotherm experiments were conducted in order to determine the sorption behavior of the examined dye. The effects of initial dye and adsorbent concentrations are considered. The results indicate that the correlation coefficient calculated from pseudo-second order equation was higher than the other kinetic equations, indicating that equilibrium data fitted well with pseudo-second order model where adsorption process was chemisorption. The adsorption equilibrium was well described by Langmuir isotherm model.

Renewable Biochemical Methane Potential through Anaerobic Co-digestion from Selective Feed Stocks

NASA Astrophysics Data System (ADS)

Thara, K.; Navis Karthika, Ignatius; Dheenadayalan, M. S., Dr

2017-08-01

Biochemical Methane Potential (BMP) analysis provides a measure of the anaerobic biodegradability of a given substrate. BMP test is also used to evaluate the potential biogas (methane) production between various Co-digestion substrates. This test is also used to determine the amount of organic carbon in a given material that can be an aerobically converted to methane-Biogas. Studies were carried out for the production of biogas from the leather solid waste. Co-digestion (simultaneous digestion of two or more substrates) studies were carried out in batch reactor using the fleshing (a solid waste generated during the processing of raw hides or skins into finished leather) along with the fruit and vegetable waste at mesophilic condition 35° C). The anaerobic methanogenic seed sludge prepared separately followed by standard BMP test, which was used as the seed inoculums. Recent research on this topic is reviewed in this current paper.

Evaluation of hides, wet blue and leather using airborne ultrasonics

USDA-ARS?s Scientific Manuscript database

Animal hides are important agricultural commodities closely associated with rural economics and the well being of rural farmers in the United States. Approximately 90% of the hides produced in the United States are being exported, the remaining 10% are mostly tanned into leather. At the present ti...

49 CFR 1039.11 - Miscellaneous commodities exemptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., etc. 26 214 Wrapping paper, wrappers or coarse paper. 26 218 Sanitary tissue stock. 26 471 Sanitary... 30 111 Rubber pneumatic tires or parts. 31 ......do Leather or leather products. 32 ......do Clay... 32 952 15 Cinders, clay, shale expanded shale), slate or volcanic (not pumice stone), or haydrite. 33...

Utilization of agricultural by-products to supplement gelatin in preparation of products for leather

USDA-ARS?s Scientific Manuscript database

When polyphenolic-modified gelatin-products were used as fillers, improvements were seen in the subjective properties of the leather. When the treated samples were compared to control samples, there were no significant changes in mechanical properties. Gelatin is in high demand and short supply, a...

40 CFR 63.5460 - What definitions apply to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... combination of smaller leather pieces and leather fibers, which when joined together, form an integral..., thus, cannot withstand 5,000 Maeser Flexes with a Maeser Flex Testing Machine or a method approved by... Maeser Flex Testing Machine or a method approved by the Administrator prior to initial water penetration...

40 CFR 63.5460 - What definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... combination of smaller leather pieces and leather fibers, which when joined together, form an integral..., thus, cannot withstand 5,000 Maeser Flexes with a Maeser Flex Testing Machine or a method approved by... Maeser Flex Testing Machine or a method approved by the Administrator prior to initial water penetration...

40 CFR 63.5460 - What definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... combination of smaller leather pieces and leather fibers, which when joined together, form an integral..., thus, cannot withstand 5,000 Maeser Flexes with a Maeser Flex Testing Machine or a method approved by... Maeser Flex Testing Machine or a method approved by the Administrator prior to initial water penetration...

21 CFR 573.540 - Hydrolyzed leather meal.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Hydrolyzed leather meal. 573.540 Section 573.540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food...

21 CFR 573.540 - Hydrolyzed leather meal.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Hydrolyzed leather meal. 573.540 Section 573.540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food...

21 CFR 573.540 - Hydrolyzed leather meal.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Hydrolyzed leather meal. 573.540 Section 573.540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food...

21 CFR 573.540 - Hydrolyzed leather meal.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Hydrolyzed leather meal. 573.540 Section 573.540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food...

21 CFR 573.540 - Hydrolyzed leather meal.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Hydrolyzed leather meal. 573.540 Section 573.540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food...

Contact allergy caused by isothiazolinone derivatives: an overview of non-cosmetic and unusual cosmetic sources.

PubMed

Aerts, Olivier; Goossens, An; Lambert, Julien; Lepoittevin, Jean-Pierre

2017-04-01

The isothiazolinone derivatives, methylchloroisothiazolinone (MCI), methylisothiazolinone (MI), benzisothiazolinone (BIT), and octylisothiazolinone (OIT), owing to their strong bactericide, fungicide and algicide properties, are widely used in non-cosmetic products, such as chemical (industrial) products, household detergents, and water-based paints, and the former two derivatives are also used in cosmetic products. However, given their inherent sensitization potential (with MCI > MI > BIT > OIT), allergic contact dermatitis is frequently observed, both in consumers as well as workers in various industries. In this review, we provide an update on the use of MCI/MI and MI in cosmetics, highlighting certain aspects of MI; the use of excessive concentrations, the presence in some less familiar cosmetic products, and the association with unusual clinical manifestations. Furthermore, the use of isothiazolinones in dish-washing and washing-machine liquids, cleaning agents for dental care, and their general presence in multi-purpose household detergents, which may elicit (airborne) allergic contact dermatitis, is discussed. Finally, we provide a brief overview of the use of isothiazolinone derivatives in the paint and textile industry, and of OIT in the leather industry in particular.

Hexavalent chromium removal by using synthesis of polyaniline and polyvinyl alcohol.

PubMed

Riahi Samani, Majid; Ebrahimbabaie, Parisa; Vafaei Molamahmood, Hamed

2016-11-01

Over the past few years, heavy metals have been proved to be one of the most important contaminants in industrial wastewater. Chromium is one of these heavy metals, which is being utilized in several industries such as textile, finishing and leather industries. Since hexavalent chromium is highly toxic to human health, removal of it from the wastewater is essential for human safety. One of the techniques for removing chromium (VI) is the use of different adsorbents such as polyaniline. In this study, composites of polyaniline (PANi) were synthesized with various amounts of polyvinyl alcohol (PVA). The results showed that PANi/PVA removed around 76% of chromium at a pH of 6.5; the PVA has altered the morphology of the composites and increased the removal efficiency. Additionally, synthesis of 20 mg/L of PVA by PANi composite showed the best removal efficiency, and the optimal stirring time was calculated as 30 minutes. Moreover, the chromium removal efficiency was increased by decreasing the pH, initial chromium concentration and increasing stirring time.

VOCs monitoring system simulation and design

NASA Astrophysics Data System (ADS)

Caldararu, Florin; Vasile, Alexandru; Vatra, Cosmin

2010-11-01

The designed and simulated system will be used in the tanning industry, for Volatile Organic Compound (VOC) measurements. In this industry, about 90% of the solvent contained in the emulsions evaporates during its application, giving rise to VOC, which are at the same time hazardous atmospheric pollutants and one of the sources of ground level photochemical ozone formation. It results that a monitoring system is necessary in a leather finishing process, in order to detect hazardous VOC concentration and conducting process in order of VOC concentration diminishing. The paper presents the design of a VOC monitoring system, which includes sensors for VOCs and temperature, the conditioning circuitry for these sensors, the suction system of the gas in the hood, the data acquisition and the computing system and graphic interface. The used sensor in the detection system is a semiconductor sensor, produced by Figaro Engineering Inc., characterized by a short response time, high sensitivity at almost all VOC substances. The design of the conditioning circuitry and data acquisition is done in order to compensate the sensor response variation with temperature and to maintain the low response time of the sensor. The temperature compensation is obtained by using a thermistor circuitry, and the compensation is done within the software design. A Mitsubishi PLC is used to receive the output signals of the circuits including the sensor and of the thermistor, respectively. The acquisition and computing system is done using Mitsubishi ALPHA 2 controller and a graphical terminal, GOT 1000.

Water quality assessment of highly polluted rivers in a semi-arid Mediterranean zone Oued Fez and Sebou River (Morocco)

NASA Astrophysics Data System (ADS)

Perrin, J. L.; Raïs, N.; Chahinian, N.; Moulin, P.; Ijjaali, M.

2014-03-01

Oued Fez (one of the Sebou River tributaries - Morocco) allowed us to study and quantify the effect of the lack of wastewater treatment on surface water quality in semi-arid hydrological context. The analysis is based on field data collected from June 2009 to December 2011. Concentration and load patterns of nitrogen, phosphorus and chromium (used in the processing of leather) are compared in stable hydrological conditions during low flow and high flow periods in an eight-location sampling network. The Oued Fez and the Sebou River are characterised by severe pollution downstream from the city of Fez, particularly TN (mainly NH4 and Norg), TP (mainly Ppart) and TCr. The most polluted sites are those directly under the influence of domestic and industrial waste water inputs, particularly tannery effluents. Obviously, the concentrations measured at these locations are above all environmental quality standards. Pollutant loads are very heavy in the Sebou River and can contaminate the river course for kilometres. Moreover, as the water of the Sebou River is used for the irrigation of vegetables, serious problems of public health could arise. A better understanding of contaminant dynamics and self-purifying processes in these rivers will help implement actions and steps aimed at improving water quality in the Sebou River, which is the primary water supply source in Morocco and is used for agricultural and industrials purposes as well as for drinking water.

Toxicity review of ethylene glycol monomethyl ether and its acetate ester.

PubMed

Johanson, G

2000-05-01

Ethylene glycol monomethyl ether (EGME) and its acetate ester (EGMEA) are highly flammable, colorless, moderately volatile liquids with very good solubility properties. They are used in paints, lacquers, stains, inks and surface coatings, silk-screen printing, photographic and photo lithographic processes, for example, in the semiconductor industry, textile and leather finishing, production of food-contact plastics, and as an antiicing additive in hydraulic fluids and jet fuel. EGME and EGMEA are efficiently absorbed by inhalation as well as via dermal penetration. Dermal absorption may contribute substantially to the total uptake following skin contact with liquids or vapours containing EGME or EGMEA. EGMEA is rapidly converted to EGME in the body and the two substances are equally toxic in animals. Therefore, the two substances should be considered as equally hazardous to man. Effects on peripheral blood, testes, and sperm have been reported at occupational exposure levels ranging between 0.4 and 10 ppm EGME in air, and with additional, possibly substantial, dermal exposure. Severe malformations and disturbed hematopoiesis have been linked with exposure to EGME and EGMEA at unknown, probably high, levels. Embryonic deaths in monkeys and impaired spermatogenesis in rabbits have been reported after daily oral doses of 12 and 25 mg per kg body weight, respectively. In several studies, increased frequency of spontaneous abortions, disturbed menstrual cycle, and subfertility have been demonstrated in women working in the semiconductor industry. The contribution of EGME in relation to other exposure factors in the semiconductor industry is unclear.

Inline inspection of textured plastics surfaces

NASA Astrophysics Data System (ADS)

Michaeli, Walter; Berdel, Klaus

2011-02-01

This article focuses on the inspection of plastics web materials exhibiting irregular textures such as imitation wood or leather. They are produced in a continuous process at high speed. In this process, various defects occur sporadically. However, current inspection systems for plastics surfaces are able to inspect unstructured products or products with regular, i.e., highly periodic, textures, only. The proposed inspection algorithm uses the local binary pattern operator for texture feature extraction. For classification, semisupervised as well as supervised approaches are used. A simple concept for semisupervised classification is presented and applied for defect detection. The resulting defect-maps are presented to the operator. He assigns class labels that are used to train the supervised classifier in order to distinguish between different defect types. A concept for parallelization is presented allowing the efficient use of standard multicore processor PC hardware. Experiments with images of a typical product acquired in an industrial setting show a detection rate of 97% while achieving a false alarm rate below 1%. Real-time tests show that defects can be reliably detected even at haul-off speeds of 30 m/min. Further applications of the presented concept can be found in the inspection of other materials.

40 CFR 63.5460 - What definitions apply to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... use include: toggling, hanging, pasting, and vacuum drying. Finish add-on means the amount of solid material deposited on the leather substrate due to finishing operations. Typically, the solid deposition is a dye or other chemical used to enhance the color and performance of the leather. Finish add-on is...

40 CFR 63.5460 - What definitions apply to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... use include: toggling, hanging, pasting, and vacuum drying. Finish add-on means the amount of solid material deposited on the leather substrate due to finishing operations. Typically, the solid deposition is a dye or other chemical used to enhance the color and performance of the leather. Finish add-on is...

75 FR 15740 - Gallery Leather Company, Inc., Trenton, ME; Notice of Termination of Investigation

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,907] Gallery Leather Company, Inc., Trenton, ME; Notice of Termination of Investigation Pursuant to Section 221 of the Trade Act of 1974, as amended, an investigation was initiated in response to a petition filed on November 20, 2009...

40 CFR 63.5415 - What notifications must I submit and when?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Operations NESHAP, and compliance date. (4) A brief description of the source including the types of leather... you startup your new or reconstructed affected source on or after February 27, 2002, you must submit... of the owner or operator. (2) The physical address of the leather finishing operation. (3) Each type...

40 CFR 63.5415 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Operations NESHAP, and compliance date. (4) A brief description of the source including the types of leather... you startup your new or reconstructed affected source on or after February 27, 2002, you must submit... of the owner or operator. (2) The physical address of the leather finishing operation. (3) Each type...

Utilization of agricultural by-products to partially replace gelatin in preparation of products for leather

USDA-ARS?s Scientific Manuscript database

When polyphenolic-modified gelatin-products were used as fillers, improvements were seen in the subjective properties of the leather. When the treated samples were compared to control samples, there were no significant changes in mechanical properties. At the present time, gelatin is in short supp...

Quantification of patulin in fruit leathers by ultra-high-performance liquid chromatography-photodiode array (UPLC-PDA)

USDA-ARS?s Scientific Manuscript database

Patulin is a mycotoxin commonly found in certain fruit and fruit products. For this reason many countries have established regulatory limits pertaining to, in particular, apple juice and apple products. Fruit leathers are produced by dehydrating fruit puree, leaving a sweet product that has a leathe...

Laser-drilled micro-hole arrays on polyurethane synthetic leather for improvement of water vapor permeability

NASA Astrophysics Data System (ADS)

Wu, Y.; Wang, A. H.; Zheng, R. R.; Tang, H. Q.; Qi, X. Y.; Ye, B.

2014-06-01

Three kinds of lasers at 1064, 532 and 355 nm wavelengths respectively were adopted to construct micro-hole arrays on polyurethane (PU) synthetic leather with an aim to improve water vapor permeability (WVP) of PU synthetic leather. The morphology of the laser-drilled micro-holes was observed to optimize laser parameters. The WVP and slit tear resistance of the laser-drilled leather were measured. Results show that the optimized pulse energy for the 1064, 532 and 355 nm lasers are 0.8, 1.1 and 0.26 mJ, respectively. The diameters of the micro-holes drilled with the optimized laser pulse energy were about 20, 15 and 10 μm, respectively. The depths of the micro-holes drilled with the optimized pulse energy were about 21, 60 and 69 μm, respectively. Compared with the untreated samples, the highest WVP growth ratio was 38.4%, 46.8% and 53.5% achieved by the 1064, 532 and 355 nm lasers, respectively. And the highest decreasing ratio of slit tear resistance was 11.1%, 14.8%, and 22.5% treated by the 1064, 532 and 355 nm lasers, respectively. Analysis of the interaction mechanism between laser beams at three kinds of laser wavelengths and the PU synthetic leather revealed that laser micro-drilling at 355 nm wavelength displayed both photochemical ablation and photothermal ablation, while laser micro-drilling at 1064 and 532 nm wavelengths leaded to photothermal ablation only.

Naval Personnel Can Improve Compliance With the Berry Amendment and the Buy American Act

DTIC Science & Technology

2015-08-12

Amendment. Introduction 2 │ DODIG-2015-161 • FSG 83—textiles, leather and furs,6 apparel , and shoes; • FSG 84— clothing , individual equipment and insignia...personnel amended standard operating procedures and internal processes to improve compliance with the Berry Amendment. NAWCAD-Lakehurst personnel...corrective action and amended standard operating procedures and internal processes to improve compliance with the Buy American Act. Additionally, NAWCAD

PHILLS-1 Hyperspectral Data Processing: 2001 LEO-15 Deployment

DTIC Science & Technology

2004-05-26

2002. 4. R.A. Leathers, T.V. Downes, W.A. Snyder, J.H. Bowles, C.O. Curtiss, M.E. Kappus , W. Chen, D. Korwan, M.J. Montes, W.J. Rhea, and M.A. Carney...5. C. Davis, M. Kappus , J. Bowles, J. Fisher, J. Antoniades, and M. Carney, “Calibration, Characterization and First Results with the Ocean PHILLS

The effect of electron acceptors on biogas production from tannery sludge of a Mexican wastewater plant

USDA-ARS?s Scientific Manuscript database

Effluents from the leather processing plants generally are discharged into rivers or are used to irrigate farmland. The biogas production from the digestion of sludge produced could be used as alternative sources for energy and power generation. A study was carried out to examine the effects of vari...

A novel system of removing decorin, a minor proteoglycan of bovine hides, to improve the quality of leather

USDA-ARS?s Scientific Manuscript database

The goal of this research was to explore ways to improve the quality of leather by the removal of more decorin. Further removal of decorin was achieved with the addition of proteolytic enzymes during pretanning. The majority of decorin removal took place during the dehairing of hides, either tradi...

[Emerging problems in enforcement of safe maternity and feeding protection at work: a public prevention service experience].

PubMed

Tarchi, M; Bartoli, D; Demi, A; Dini, F; Farina, G A; Sannino, G

2007-01-01

We have examined the claims for advance maternity leave or prolonged benefits for breastfeeding addressed to Occupational Health Unity of Local Health Service 11 by women at harmful works in the period 2002-2005. The most frequent occupations were: shoemaker (29%), service company's employee (7%), tanners (7%), leather industry's employee (6%) and food industry's employee (6%). The most important risk factors were: bound postures, manual load handling, chemical hazards and biological agents. The numbers of claims increased during the period of interest. In the work place often risks for pregnancy and breastfeeding are not correctly assessed and women workers are not informed on their rights. The Occupational Health Unity of Local Health Service 11 tried to correct the lack of information for workers, employers, workers' representatives in health and safety and enterprise's occupational health physician.

Toxicity of leather tanning wastewater effluents in sea urchin early development and in marine microalgae.

PubMed

Meriç, Süreyya; De Nicola, Elena; Iaccarino, Mario; Gallo, Marialuisa; Di Gennaro, Annamaria; Morrone, Gaetano; Warnau, Michel; Belgiorno, Vincenzo; Pagano, Giovanni

2005-10-01

This study was designed to investigate the composition and the toxicity of leather tanning wastewater and conditioned sludge collected at the leather tanning wastewater treatment plant (CODISO) located in Solofra, Avellino (Southern Italy). Samples were analyzed for their conventional parameters (COD, TSS, chromium and ammonia) and for metal content. Effluent samples included raw wastewater, and samples collected following coagulation/flocculation process and biological treatment. A set of toxicity endpoints were tested using sea urchin and marine microalgal bioassays by evaluating acute embryotoxicity, developmental defects, changes in sperm fertilization success and transmissible damage from sperm to the offspring, and changes in algal growth rate. Dose-related toxicity to sea urchin embryogenesis and sperm fertilization success was exerted by effluent or sludge samples according to the following rank: conditioned sludge > coagulated effluent > or = raw influent > effluent from biological treatment. Offspring quality was not affected by sperm exposure to any wastewater or to sludge samples. Algal growth was inhibited by raw or coagulated effluent to a similar extent and, again, the effluent from the biological treatment resulted in a decreased toxicity. The results suggest that coagulated effluent and conditioned sludge result in higher toxicity than raw influent in sea urchin embryos and sperm, whereas the biological wastewater treatment of coagulated effluent, in both sea urchins and algae, cause a substantial improvement of wastewater quality. Hence a final biological wastewater treatment should be operated to minimize any environmental damage from tannery wastewater.

Oil on Paper: A Collaborative Conservation Challenge

PubMed Central

Herro, Holly; Nolley, Scott; Cowan, Wendy; Wright, Kristi

2018-01-01

The application of oil-based leather dressing, while once considered a best practice in libraries, led to undesirable long-term consequences for bound materials. At the National Institutes of Health (NIH) in the National Library of Medicine (NLM), many leather-bound volumes had multiple applications of a mixture of neatsfoot oil and lanolin dressings liberally applied. The oils not only absorbed into the leather bindings but also migrated onto the pastedowns, end sheets, gutters, and text blocks. The oiling process at NLM was documented by call number, year(s), number of applications, and dressing formula. While investigating treatment options, the NLM senior conservator consulted a paintings and objects conservator for insight on viable options for the removal of oil from artifacts. An art-on-paper conservator joined the collaborative effort to develop a treatment protocol for NLM’s oil saturated collections. Together, they investigated the issue and devised an effective method for removal of this oil from the NIH collection materials. The protocol involves washing with an alkaline solution followed by alternating applications of petroleum ether and acetone applied either over suction or by immersion. Oil components are solubilized by the alternating polarities of the solvents and then removed from the paper using suction or immersion. After the oil is removed, the paper is washed again with alkaline water to remove any remaining water soluble discoloration. This article will explore further details of the treatment protocol, its development and applications, and the benefits of cross-disciplinary collaboration. PMID:29630074

Chromium fractionation and plant availability in tannery-sludge amended soil

NASA Astrophysics Data System (ADS)

Allué, Josep; Moya Garcés, Alba; Bech, Jaume; Barceló, Juan; Poschenrieder, Charlotte

2013-04-01

The leather industry represents an important economic sector in both developed and developing countries. Chromium tanning is the major process used to obtain high quality leather. Within the REACH regulation the use of Cr, especially CrVI, in the tanning process is under discussion in Europe. High Cr concentration in shoes and other Cr-tanned leather products can cause contact dermatitis in sensitive population. Moreover, the high Cr concentration is the major limiting factor for the use of tannery sludge as a source of organic matter in agricultural soils. Interest in Cr, however is not limited to its potential toxic effects. Chromium III is used as a dietary supplement because there are reports, but also controversy, about the positive effects of Cr III in glucose tolerance and type-2 diabetes. Adequate intake levels for Cr by the diet have been established between 25 and 35 µg/day for adult females and males, respectively. Sufficient supply of Cr III by the diet is preferable to the use of CrIII-salt based dietary supplements. The objective of the present work was to investigate whether Cr from tannery sludge-amended soil is available to Trigonella foenum-graecum plants, a plant used both as a spice and as a medicinal herb, because of its hypoglucemic effects. For this purpose clay loam soil (pH 7.8) was sieved (2mm) and thoroughly mixed with tannery sludge from a depuration station (Igualadina Depuració i Recuperació S.L., Igualada, Barcelona, Spain). The sludge had a Cr concentration of 6,034mg kg-1 and a 0.73 % of NH4-nitrogen. All the Cr was in the form of CrIII. Three treatments were disposed. Control soil receiving no sludge, a 60 mg kg-1 Cr treatment (10 g fresh sludge kg-1 soil) and a 120 mg kg-1 Cr treatment (20 g fresh sludge kg-1 soil). Control soil and the soil treated with 10g kg-1 sludge received NPK fertilizer in the form of ammonium sulfate, superfosfate, and KCl to rise the N,P, and K concentrations to similar levels to those achieved in the soils with the highest sludge dose (20 g kg-1). Soils from the different treatments were potted (5 L) and planted with Trigonella foenum graecum seeds (1 plant per pot). Plants were harvested in the vegetative stage and processed for tissue analysis of Cr, Fe, Zn and Pb. A sequential extraction procedure was applied to the soil for getting insight into the operationally defined soil fractions that incorporate the tannery sludge derived Cr. In any of the treatments Cr was detectable in the exchangeable and easily reducible fractions. In control soils around 10% of soil Cr was in the moderately reducible fraction and the rest in the residual fraction. Contrastingly tannery sludge amended soils incorporated most Cr in the moderately reducible fraction extracted by acid oxalate. This distribution in relation to plant Cr concentrations will be discussed. Acknowledgement: Supported by the Spanish Government (project BFU2010-14873)

Fluctuations in the prevalence of chromate allergy in Denmark and exposure to chrome-tanned leather.

PubMed

Carøe, Caroline; Andersen, Klaus E; Thyssen, Jacob P; Mortz, Charlotte G

2010-12-01

A recent Danish study showed a significant increase in the prevalence of chromate contact allergy after the mid-1990s, probably as a result of exposure to leather products. To reproduce the results by analysing data from the period 1992-2009 at Odense University Hospital, Denmark. The temporal development in the occurrence of chromate contact allergy and assumed causative exposures were investigated. A retrospective analysis of patch test data was performed (n = 8483), and medical charts from patients with chromate allergy (n = 231) were reviewed. Comparisons were made using the χ(2) -test. A test of the reproducibility of the TRUE Test® was also performed. Logistic regression analyses were used to test for associations. No significant changes in the prevalence or exposure sources of chromate allergy during 1992-2009 were identified. Leather shoes (24.4%) were the most frequent exposure sources in chromate allergy, and were mainly registered in women, although the difference between men and women was not significant (P = 0.07). Cement and leather glove exposure occurred significantly more often in men than in women (P = 0.002). Foot dermatitis (40.3%) was the most frequent anatomical location, apart from hand eczema (60.6%). The reproducibility of the TRUE Test® was 93.3%. Apart from hand eczema, the most frequent clinical picture of chromate allergy was foot dermatitis caused by leather shoe exposure. A tendency for an increasing prevalence of chromate contact allergy from 1997 was shown, but no significant change was detectable. © 2010 John Wiley & Sons A/S.

Strategies for chromium bioremediation of tannery effluent.

PubMed

Garg, Satyendra Kumar; Tripathi, Manikant; Srinath, Thiruneelakantan

2012-01-01

Bioremediation offers the possibility of using living organisms (bacteria, fungi, algae,or plants), but primarily microorganisms, to degrade or remove environmental contaminants, and transform them into nontoxic or less-toxic forms. The major advantages of bioremediation over conventional physicochemical and biological treatment methods include low cost, good efficiency, minimization of chemicals, reduced quantity of secondary sludge, regeneration of cell biomass, and the possibility of recover-ing pollutant metals. Leather industries, which extensively employ chromium compounds in the tanning process, discharge spent-chromium-laden effluent into nearby water bodies. Worldwide, chromium is known to be one of the most common inorganic contaminants of groundwater at pollutant hazardous sites. Hexavalent chromium poses a health risk to all forms of life. Bioremediation of chromium extant in tannery waste involves different strategies that include biosorption, bioaccumulation,bioreduction, and immobilization of biomaterial(s). Biosorption is a nondirected physiochemical interaction that occurs between metal species and the cellular components of biological species. It is metabolism-dependent when living biomass is employed, and metabolism-independent in dead cell biomass. Dead cell biomass is much more effective than living cell biomass at biosorping heavy metals, including chromium. Bioaccumulation is a metabolically active process in living organisms that works through adsorption, intracellular accumulation, and bioprecipitation mechanisms. In bioreduction processes, microorganisms alter the oxidation/reduction state of toxic metals through direct or indirect biological and chemical process(es).Bioreduction of Cr6+ to Cr3+ not only decreases the chromium toxicity to living organisms, but also helps precipitate chromium at a neutral pH for further physical removal,thus offering promise as a bioremediation strategy. However, biosorption, bioaccumulation, and bioreduction methods that rely on free cells for bioremediation suffer from Cr6 toxicity, and cell damage. Therefore, immobilization of microbial cell biomass enhances bioremediation and renders industrial bioremediation processes more economically viable from reduced free-cells toxicity, easier separation of biosorbents from the tannery effluent, ability to achieve multiple biosorption cycles, and desorption (elution) of metal(s) from matrices for reuse. Thus, microbial bioremediation can be a cost competitive strategy and beneficial bioresource for removing many hazardous contaminants from tannery and other industrial wastes.

Composite Material Hazard Assessment at Crash Sites

DTIC Science & Technology

2015-01-01

advanced composite materials. All personnel involved in rescue in close crash-site proximity are required to wear self -contained breathing apparatus...close crash-site proximity are required to wear self -contained breathing apparatus, chemical protective clothing, leather gloves, and neoprene...Take extra precaution when handling these materials. Nitrile rubber gloves can be worn underneath the leather gloves to provide chemical hazard

Chromate Dissociation from Primer Paint in Simulated Lung Fluid.

DTIC Science & Technology

2000-03-01

not done properly. Chromium is found naturally in the earth’s crust; trivalent chromium is a necessary dietary mineral. Other oxidative states such...exposures to chromium can include welding , leather tanning, electroplating, textile manufacturing, photoengraving, copier servicing and paints/pigments...production, production of chromates and chromate pigments, leather tanning, chromium plating and welding . Unfortunately, no detailed health studies have

Cancer incidence and mortality among Swedish leather tanners.

PubMed Central

Mikoczy, Z; Schütz, A; Hagmar, L

1994-01-01

OBJECTIVES--The aim was to study the incidence of cancer among Swedish leather tanners. METHODS--A cohort of 2026 subjects who had been employed for at least one year between 1900 and 1989 in three Swedish leather tanneries, was established. The cancer incidence and mortality patterns were assessed for the periods 1958-89 and 1952-89 respectively, and cause-specific standardised incidence and mortality ratios (SIRs and SMRs) were calculated. RESULTS--A significantly increased incidence of soft tissue sarcomas (SIR 4.27, 95% confidence interval (95% CI) 1.39-9.97) was found, based on five cases. Excesses, (not statistically significant) was also found for multiple myelomas (SIR 2.54, 95% CI 0.93-5.53), and sinonasal cancer (SIR 3.77, 95% CI 0.46-13.6). CONCLUSIONS--The increased incidence of soft tissue sarcomas adds support to previous findings of an excess mortality in this diagnosis among leather tanners. A plausible cause is exposure to chlorophenols, which had occurred in all three plants. The excess of multiple myelomas may also be associated with exposure to chlorophenol. The association between incidence of cancer and specific chemical exposure will be elucidated in a cohort-based case-referent study. PMID:7951777

A Case of Chromium Contact Dermatitis due to Exposure from a Golf Glove.

PubMed

Lim, Jong Ho; Kim, Hei Sung; Park, Young Min; Lee, Jun Young; Kim, Hyung Ok

2010-02-01

Chromium is a transition metal and has been shown to elicit contact dermatitis. Although leather products have been known to be the most significant source of chromium exposure these days, the majority of reports have been related to exposure from shoe products. We herein report a professional golfer who became allergic to golf gloves made of chromium-tanned leather. A 27-year-old woman golfer presented with recurrent, pruritic, erythematous plaques that had been occurring on both hands for several years. The lesions developed whenever she had worn golf gloves for an extended period of time, especially during tournament season. To identify the causative agent, patch tests were performed and the results demonstrated a strong positive reaction to potassium dichromate 0.5% and to her own glove. The amount of chromium in her golf glove was analyzed to be 308.91 ppm and based on this, a diagnosis of allergic contact dermatitis due to a chromium-tanned leather glove was made. She was treated with oral antihistamines combined with topical steroids and advised to wear chromium-free leather gloves. There has been no evidence of recurrence during a six month follow-up period.

Pulmonary functions in tannery workers--a cross sectional study.

PubMed

Chandrasekaran, Vasanthi; Dilara, K; Padmavathi, R

2014-01-01

Tannery workers are at potential exposure to detrimental agents rendering them vulnerable to respiratory and dermal problems. Thus by performing pulmonary functions among leather tannery workers, we can decipher the effect of chromium and leather dust on lung functions and also the decline of respiratory functions with increasing years of exposure to leather dust. Pulmonary functions were assessed for 130 tannery workers and compared with the 130 unexposed office workers. Pulmonary function measurements namely FVC, FEV1, FEF25-75% and PEFR were measured using portable data logging Spirometer (KOKO Spirometer). The observed pulmonary functions of Tannery-workers in this study showed a reduction in FEV1, FVC, FEV1/FVC ratio, FEF25-75 and PEFR in relation to their predicted values and also compared to the unexposed. Smokers showed a decline in pulmonary functions compared to the non smokers because smoking acts as an additional risk factor in the development of respiratory illnesses. It is worthy to mention that the pulmonary function values correlate negatively with the duration of exposure to leather dust. So this study could provide base line information based upon which legal implementation of preventive measures could be undertaken.

A comparison of multi-metal deposition processes utilising gold nanoparticles and an evaluation of their application to 'low yield' surfaces for finger mark development.

PubMed

Fairley, C; Bleay, S M; Sears, V G; NicDaeid, N

2012-04-10

This paper reports a comparison of the effectiveness and practicality of using different multi-metal deposition processes for finger mark development. The work investigates whether modifications can be made to improve the performance of the existing process published by Schnetz. Secondly, we compare the ability of different multi-metal deposition processes to develop finger marks on a range of surfaces with that of other currently used development processes. All published multi-metal deposition processes utilise an initial stage of colloidal gold deposition followed by enhancement of the marks with using a physical developer. All possible combinations of colloidal gold and physical developer stages were tested. The method proposed by Schnetz was shown to be the most effective process, however a modification which reduced the pH of the enhancement solution was revealed to provide the best combination of effectiveness and practicality. In trials comparing the modified formulation with vacuum metal deposition, superglue and powder suspensions on surfaces which typically give low finger mark yields (cling film, plasticised vinyl, leather and masking tape), the modified method produced significantly better results over existing processes for cling film and plasticised vinyl. The modified formulation was found to be ineffective on both masking tape and leather. It is recommended that further tests be carried out on the modified multi-metal deposition formulation to establish whether it could be introduced for operational work on cling film material in particular. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

[Acute alveolitis after using a waterproofing aerosol: apropos of 2 cases].

PubMed

Testud, F; Gabrielle, L; Paquin, M L; Descotes, J

1998-04-01

Waterproofing sprays for leather clothing have seldom been involved in severe accidents. In some circumstances, their pulmonary toxicity is marked, as shown by two case reports and a review of the literature. Acute alveolitis is described in two young adults without previous respiratory illness, following the use of a waterproofing spray for leather clothing. Clinical features typical of a flu-like reaction (malaise, fever and chills) were associated with dyspnea and with hemoptysis in one patient. X-ray examination evidenced lesional edema which quickly resolved after symptomatic treatment. The toxic mechanism is debated, but experimental data and clinical findings suggest the causative role of recently introduced fluoropolymers. Waterproofing sprays for leather clothing may induce severe respiratory illness after massive inhalation in confined area. Treatment is supportive.

Adsorption isotherm studies of chromium (VI) from aqueous solutions using sol-gel hydrotalcite-like compounds.

PubMed

Ramos-Ramírez, Esthela; Ortega, Norma L Gutiérrez; Soto, Cesar A Contreras; Gutiérrez, Maria T Olguín

2009-12-30

In under-developed countries, industries such as paint and pigment manufacturing, leather tanning, chrome plating and textile processing, usually discharge effluents containing Cr(VI) and Cr(III) into municipal sanitary sewers. It has been reported that Cr(VI) acts as a powerful epithelial irritant and as a human carcinogen. In the present work, hydrotalcite-like compounds with a Mg/Al ratio=2 were synthesized by the sol-gel method. The hydrotalcite-like compounds and their corresponding thermally treated products were characterized by powder X-ray diffraction, infrared spectroscopy and N(2) adsorption. The hydrotalcite-like compounds and the heated solids were used as adsorbents for Cr(VI) in aqueous solutions. Adsorption isotherm studies of Cr(VI) from aqueous solution are described. The adsorbent capacity was determined using the Langmuir, Freundlich and Dubinin-Radushkevich adsorption isotherm models. The Cr(VI) adsorption isotherm data fit best to the Langmuir isotherm model. The maximum Cr(VI) uptake by hydrotalcite and the heated solids was determined using the Langmuir equation and was found to range between 26 and 29 mg Cr(VI)/g adsorbent.

[Risk assessment of work-related upper limb musculoskeletal disorders in thirty factories in the upholstered furniture industry].

PubMed

Nicoletti, S; Carino, M; Di Leone, G; Trani, G; Colombini, Daniela; Occhipinti, E

2008-01-01

One of the most common procedures for risk assessment of upper limb work-related musculoskeletal disorders (UL-WMSDs) in Italy is the OCRA synthetic index, which is recommended as the preferred method in the ISO standard 11228-3. The aim of the survey was to assess the risk of UL-WMSDs due to repetitive strain and movements in thirty factories of the sofa industry located in a large geographic area of southern Italy. The most characteristic working tasks of the manufacturing process were studied: filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. The single tasks were carried out almost exclusively manually, with features of a handicraft approach. Data were collected through questionnaires and video tape recordings in each factory. The mean value of the OCRA index of every group of factories was calculated by weighting the values of the index of each single task group with the number of the workers. Figures obtained in the different factories showed values of the OCRA index ranging between 4 and 15. A 2,9 OCRA value was attributed to a low exposure group. Even though the work tasks analyzed were characterized by long duration of the manufacturing cycle (between 5 and 60 min), a particular but rigorous application of the OCRA procedures made it possible for a detailed risk assessment to be made for each of the working groups analysed.

"Wash leather scrotum" (scrotal dermatitis): a treatable cause of male infertility.

PubMed

Hendry, W F; Munro, D D

1990-02-01

A group of 16 male patients with infertility had dermatitis of the scrotum and groins giving lichenified oedematous skin; the resulting thickening and loss of rugosity produced a characteristic appearance that we have termed wash leather scrotum. Treatment of the dermatosis resulted in an improvement in sperm count and motility in most patients, and 5 couples produced one or more pregnancies.

Collagen from Marine Biological Sources and Medical Applications.

PubMed

Felician, Fatuma Felix; Xia, Chunlei; Qi, Weiyan; Xu, Hanmei

2018-05-01

Collagen is the most studied protein with a wide range of applications including pharmaceutical, biomedical, cosmetics, leather, and film industries due to its special characteristics that are high biocompatibility, good bioactivity, and weak antigenicity. Although collagen sources are abundant, the outbreak of varied diseases among land animals posed threat to its utilization in our daily life. Thus, a probe for an alternative source began, which in turn revealed the immense untapped marine sources, such as fish, jellyfish, and some marine Mammals. The present article deals with a brief description of collagen, its characteristics, marine sources, extraction, collagen peptides and their biological activities, potential use and application in various field. © 2018 Wiley-VHCA AG, Zurich, Switzerland.

Surface modification of polyester synthetic leather with tetramethylsilane by atmospheric pressure plasma

NASA Astrophysics Data System (ADS)

Kan, C. W.; Kwong, C. H.; Ng, S. P.

2015-08-01

Much works have been done on synthetic materials but scarcely on synthetic leather owing to its surface structures in terms of porosity and roughness. This paper examines the use of atmospheric pressure plasma (APP) treatment for improving the surface performance of polyester synthetic leather by use of a precursor, tetramethylsilane (TMS). Plasma deposition is regarded as an effective, simple and single-step method with low pollution. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) confirm the deposition of organosilanes on the sample's surface. The results showed that under a particular combination of treatment parameters, a hydrophobic surface was achieved on the APP treated sample with sessile drop static contact angle of 138°. The hydrophobic surface is stable without hydrophilic recovery 30 days after plasma treatment.

The effect of mimosa and syntan mixture on the quality of tanned red snapper leather

NASA Astrophysics Data System (ADS)

Pratama, M.; Sahubawa, L.; Pertiwiningrum, A.; Rahmadian, Y.; Puspita, I. D.

2018-03-01

This study aimed to determine the effect of syntan and mimosa combination on the quality of tanned red snapper leather. The study was designed using complete randomized design (CRD) and the advanced test of Least Significant Difference (LSD) with three replications and three treatments of combined syntan and mimosa, namely: p1 (4 % syntan, 5 % mimosa), p2 (8 % syntan, 5 %mimosa), p3 (12 % syntan, 5 % mimosa). Data were analyzed using SPSS 18. The measured parameters were tensile strength (N·cm-2), elongation (%), tear strength (N·cm-1), enervation (mm), wrinkle temperature (°C), fat/oil content (%) and water content (%). The results indicate that the combined syntan and mimosa tanners gave no significant effect on the physical parameters (tensile strength, elongation, tear strength, enervation and wrinkle temperature) and chemical parameters (moisture and fat/oil). All treatments (p1, p2 and p3) met the Indonesian National Standard (SNI) 06-4586-1998 for chrome tanned freshwater snake leather for the parameters of tensile strength, tear strength, enervation, wrinkle temperature and moisture. The parameter of elongation and fat/oil content did not meet with the SNI 06-4586-1998. Among the three combinations of a tanner, syntan 4 % and mimosa 5 % treatment gave the best leather quality.

A randomized single blind crossover trial comparing leather and commercial wrist splints for treating chronic wrist pain in adults

PubMed Central

Thiele, Jill; Nimmo, Rachel; Rowell, Wendy; Quinn, Stephen; Jones, Graeme

2009-01-01

Background To compare the effectiveness of a custom-made leather wrist splint (LS) with a commercially available fabric splint (FS) in adults with chronic wrist pain. Methods Participants (N = 25, mean age = 54) were randomly assigned to treatment order in a 2-phase crossover trial. Splints were worn for 2 weeks, separated by a one-week washout period. Outcomes were assessed at baseline and after each splint phase using the Australian/Canadian Osteoarthritis Hand Index (AUSCAN), the Canadian Occupational Performance Measure (COPM) and Jamar dynamometer by an observer blinded to treatment allocation. Results Both styles of wrist splint significantly reduced pain (effect size LS 0.79, FS 0.43), improved hand function and increased grip strength compared to baseline (all p < 0.05) with no increase in wrist stiffness. There was a consistent trend for the LS to be superior to the FS but this was statistically significant only for patient perceived occupational performance (p = 0.008) and satisfaction (p = 0.015). Lastly, 72% of patients preferred the custom-made leather splint compared to the commercially available splint. Conclusion Leather wrist splints were superior to a commercially available fabric splint for the short-term relief of pain and dysfunction. PMID:19843345

Associations of fertility and pregnancy outcomes with leather tannery work in Mongolia: a pilot study.

PubMed

Greene, Leslie E; Riederer, Anne M; Marcus, Michele; Lkhasuren, Oyuntogos

2010-01-01

To our knowledge, reproductive health effects among male leather tannery workers have not been previously investigated. Tannery work involves exposure to chromium, solvents, and other chemicals, which has been associated with adverse pregnancy and fertility outcomes in animals or humans in some studies. This study retrospectively investigates the association of male leather tannery work with preterm delivery, spontaneous abortion, time to pregnancy, and infertility by comparing tannery employees to other workers in Ulaanbaatar, Mongolia. Participants were randomly selected from current employee rosters at eight tanneries and two bread-making companies. The results of this research suggest that tannery work may be associated with reduced fertility in males. The study had limited statistical power, and some factors are likely to have biased findings toward the null hypothesis; other limitations and possible sources of undetermined bias give reason for cautious interpretation. Additional studies should be conducted to further examine fertility among tannery workers.

Investigation of severe water problem in urban areas of a developing country: the case of Dhaka, Bangladesh.

PubMed

Nahar, Mst Shamsun; Zhang, Jing; Ueda, Akira; Yoshihisa, Fujishiro

2014-12-01

The present study evaluated water supply geochemistry in Dhaka City, Bangladesh, to provide detailed trace level (subppb) water quality data that include major ions, low dissolved oxygen (DO) and toxic trace metals for sustainable development. Dhaka Groundwater, which almost uniformly meets the World Health Organization guideline, has become the preferred source. Due to groundwater depletion and an ever-increasing need to meet water demands by city residents, Dhaka water supply and sewerage authority has initiated the treatment of river water, despite the fact that very little is known about the geochemical structure, and trace metal content in the Dhaka water supply. Major ion composition of water samples was determined, and the results used to generate Stiff diagrams. The diagrams served to visually compare water from different sources based on units of mass/volume. Hydrochemical facies analysis showed supply ground and surface waters are comprised predominately of Ca-Na-Mg-HCO3 and Ca-Na-Mg-HCO3-Cl types. Spatial distribution of ions, and Na/Cl and Na/SiO2 molar ratio indicated that silicate weathering is the dominant geochemical process. Chemical data revealed that toxic Cr metal mobilization is associated with chemical hazards from the leather industry. The vulnerability of deep wells to contamination by As is governed by the geometry of induced groundwater flow paths and the geochemical conditions encountered between the shallow and deep regions of the aquifer. Quantifying total arsenic (As) and As from interlocking geochemical cycles (Fe, Mn) may assist in interpreting As dynamics in Dhaka well water. The surface source water was hypoxic to anoxic low DO associated with very high concentrations of biological oxygen demands, and electrical conductivity compared to industrial and non-industrial urban processes and standard activity guidelines. The results of this study should be applied to future research focused on the potential to improve water quality in urban and surrounding areas.

Ivermectin treatment of bovine psoroptic mange: effects on serum chemistry, hematology, organ weights, and leather quality.

PubMed

Rehbein, S; Visser, M; Meyer, M; Lindner, T

2016-04-01

Psoroptic mange is a skin disease which may result in serious health and welfare problems and important economic losses. Apart from the effect on weight gain, little information is available concerning other responses of the organism consequent to the successful therapy of bovine psoroptic mange. Accordingly, serum chemistry, hematology, organ weights, and leather quality of young bulls with experimentally induced clinical Psoroptes ovis mange and treated with either ivermectin long-acting injection (IVM LAI; IVOMEC(®) GOLD, Merial) or saline (n = 16 each) were examined 8 weeks after treatment when all IVM LAI-treated bulls were free of live P. ovis mites while the saline-treated bulls maintained clinical mange. IVM LAI-treated bulls had higher (p < 0.05) alkaline phosphatase, creatinine, cholesterol, glucose, and albumin levels and lower (p < 0.01) total protein and β- and γ-globulin levels than the saline-treated bulls. Complete blood counts revealed higher leukocyte counts associated with higher eosinophil counts and higher platelet counts in the saline-treated compared to the IVM LAI-treated bulls (p < 0.01). Correlating with body weight, the warm carcass weight of the saline-treated bulls was lower than that of the IVM LAI-treated bulls (p < 0.05). Absolute and relative (organ weight divided by body weight) weights of the spleen, thymus, omental fat, and perirenal fat were higher (p < 0.01) for the IVM LAI-treated bulls than for the saline-treated bulls, while the IVM LAI-treated bulls had lower (p < 0.05) absolute and relative weights of the liver, adrenal glands, and selected lymph nodes than the saline-treated bulls. The leathers produced from the IVM LAI-treated bulls showed significantly (p < 0.001) less severe gouging or etching than leathers from the saline-treated bulls, and significantly (p < 0.05) more leather from the IVM LAI-treated bulls was of usable quality than the size of leather from the saline-treated bulls. Overall, these findings provided evidence that many changes, which are indicative of impaired protein and energy metabolism, immune system function, and performance resultant from clinical psoroptic mange, improved substantially within 8 weeks of successful treatment with injectable ivermectin.

[Clinico-pathologic correlation of dementia produced by thinner and cocaine].

PubMed

Barroso Moguel, R; Méndez Armenta, M; Villeda Hernández, J

1993-01-01

Industrial solvents mixed from thinner, used in paints, leathers, rubber, varnishes, have neurotoxic action. By laboral inhalation or spontaneously these are absorbed from the lungs, transported by blood and because of this high lipophilic section are retained within the lipid rich nervous system. Euphoric effects appear accompanied with visual and additive halucinations. In chronic abusers it produce schizophrenic-paranoid consequences with encephalic and peripheral neuronal and nervous fibers destruction, accompanied of blindness and paralysis. Cocaine is another neurotoxic drug. At first it produces euphoria, arterial hypertension and symptoms suggestive of underlying psychiatric diseases. The cocaine addicts often suffer depression, paranoia, hallucinations, seizures and suicidal ideation. The morphological base of the symptomatology is the encephalic and peripheral neuronal and nerve fibers destruction.

Biotechnological applications of transglutaminases.

PubMed

Rachel, Natalie M; Pelletier, Joelle N

2013-10-22

In nature, transglutaminases catalyze the formation of amide bonds between proteins to form insoluble protein aggregates. This specific function has long been exploited in the food and textile industries as a protein cross-linking agent to alter the texture of meat, wool, and leather. In recent years, biotechnological applications of transglutaminases have come to light in areas ranging from material sciences to medicine. There has also been a substantial effort to further investigate the fundamentals of transglutaminases, as many of their characteristics that remain poorly understood. Those studies also work towards the goal of developing transglutaminases as more efficient catalysts. Progress in this area includes structural information and novel chemical and biological assays. Here, we review recent achievements in this area in order to illustrate the versatility of transglutaminases.

Occupational risks of sinonasal cancer in Denmark.

PubMed

Olsen, J H

1988-05-01

A new comprehensive data linkage system for the detailed investigation of occupational cancer has been established in the Danish Cancer Registry, providing employment histories back to 1964. All 382 cases of cancers of the sinonasal cavities diagnosed between 1970 and 1984 and kept on file in this data linkage system were analysed using standardised proportional incidence ratios (SPIR) to screen for industrial high risk areas for these malignancies in Denmark. Excess risks were confirmed among men and women employed in the manufacture of footwear and other leather products and of wooden furniture. No risk significantly above expectancy was observed among wood workers outside the furniture making industry. Excess risks were also seen among men in all areas of basic metal industries (SPIR = 184-562) and in a subset of workers in industries producing metal containers (SPIR = 329-600). Most unexpected were raised risks among employees of both sexes in making cocoa, chocolate, and sugar confectionery (SPIR = 535 for men and 860 for women); these, in combination with the observed risks among female employees in canning and preserving fruits and vegetables (SPIR = 778) and in farming (SPIR = 735) may point to a common aetiology. The obscuring effect of mass significance may, however, be another explanation. The new associations discovered in this large scale linkage study must therefore await further confirmation.

Occupational risks of sinonasal cancer in Denmark.

PubMed Central

Olsen, J H

1988-01-01

A new comprehensive data linkage system for the detailed investigation of occupational cancer has been established in the Danish Cancer Registry, providing employment histories back to 1964. All 382 cases of cancers of the sinonasal cavities diagnosed between 1970 and 1984 and kept on file in this data linkage system were analysed using standardised proportional incidence ratios (SPIR) to screen for industrial high risk areas for these malignancies in Denmark. Excess risks were confirmed among men and women employed in the manufacture of footwear and other leather products and of wooden furniture. No risk significantly above expectancy was observed among wood workers outside the furniture making industry. Excess risks were also seen among men in all areas of basic metal industries (SPIR = 184-562) and in a subset of workers in industries producing metal containers (SPIR = 329-600). Most unexpected were raised risks among employees of both sexes in making cocoa, chocolate, and sugar confectionery (SPIR = 535 for men and 860 for women); these, in combination with the observed risks among female employees in canning and preserving fruits and vegetables (SPIR = 778) and in farming (SPIR = 735) may point to a common aetiology. The obscuring effect of mass significance may, however, be another explanation. The new associations discovered in this large scale linkage study must therefore await further confirmation. PMID:3378013

Removal of heavy metal from industrial effluents using Baker's yeast

NASA Astrophysics Data System (ADS)

Ferdous, Anika; Maisha, Nuzhat; Sultana, Nayer; Ahmed, Shoeb

2016-07-01

Bioremediation of wastewater containing heavy metals is one of the major challenges in environmental biotechnology. Heavy metals are not degraded and as a result they remain in the ecosystem, and pose serious health hazards as it comes in contact with human due to anthropogenic activities. Biological treatment with various microorganisms has been practiced widely in recent past, however, accessing and maintaining the microorganisms have always been a challenge. Microorganisms like Baker's yeast can be very promising biosorbents as they offer high surface to volume ratio, large availability, rapid kinetics of adsorption and desorption and low cost. The main aim of this study is to evaluate the applicability of the biosorption process using baker's yeast. Here we present an experimental investigation of biosorption of Chromium (Cr) from water using commercial Baker's Yeast. It was envisaged that yeast, dead or alive, would adsorb heavy metals, however, operating parameters could play vital roles in determining the removal efficiency. Parameters, such as incubation time, pH, amount of biosorbent and heavy metal concentration were varied to investigate the impacts of those parameters on removal efficiency. Rate of removal was found to be inversely proportional to the initial Cr (+6) concentrations but the removal rate per unit biomass was a weakly dependent on initial Cr(+6) concentrations. Biosorption process was found to be more efficient at lower pH and it exhibited lower removal with the increase in solution pH. The optimum incubation time was found to be between 6-8 hours and optimum pH for the metal ion solution was 2. The effluents produced in leather industries are the major source of chromium pollution in Bangladesh and this study has presented a very cost effective yet efficient heavy metal removal approach that can be adopted for such kind of wastewater.

Materials for Slack Diaphragms

NASA Technical Reports Server (NTRS)

Puschmann, Traute

1940-01-01

This report deals with systematic experiments carried out on five diaphragm materials with different pretreatment, for the purpose of ascertaining the suitability of such materials for slack diaphragms. The relationship of deflection and load, temperature and moisture, was recorded. Of the explored materials, synthetic leather, balloon cloth, goldbeaters skin, Igelit and Buna, synthetic leather treated with castor oil is the most suitable material for the small pressure range required. Balloon cloth is nearly as good, while goldbeaters skin, Igelit and Buna were found to be below the required standards.

Eco-friendly rubberized cotton fabric roller for ginning machines.

PubMed

Iyer, G V

2007-01-01

This article discusses the pollution caused by chrome composite leather-clad (CCLC) rollers commonly used in cotton roller ginning mills and suggests an alternative roller material. CCLC rollers contain about 18,000 to 36,000 mg/kg (ppm) total chromium in trivalent and hexavalent forms, which are toxic to human health and carcinogenic. When seed-cotton is processed in double roller (DR) ginning machines, the lint is contaminated with chromium, and chromium particles are carried into the spun yarns and cotton by-products. Specifically, due to persistent rubbing of the leather-clad roller over the stationary knife during the ginning process, the lint is contaminated with about 140 to 1990 ppm of chromium, and the spun yarns and cotton by-products contain about 100 to 200 ppm, far in excess of the standard limit of 0.1 ppm. Gin and mill workers are directly exposed to this carcinogenic substance. To offset this problem, pollution-free rubberized cotton fabric (RCF) rollers have been fabricated and tested in roller gins. The RCF roller covering is made of multiple layers of fabric bonded together using a white rubber compound, which has a surface finish conducive to high ginning efficiency. This eliminates chromium contamination and pollution during the ginning process. On the basis of the design and development of various test rollers and subsequent evaluation studies, the performance of pollution-free RCF rollers has been demonstrated with reference to their commercial benefit and eco-friendliness in cotton ginning mills.

Durably controlling bovine hypodermosis.

PubMed

Boulard, Chantal

2002-01-01

Cattle hypodermosis, due to insect larvae, is widely spread over the northern hemisphere. Very efficient insecticides are available and their use in most countries are done on an individual level but never cover the whole cattle population of a country. Untreated animals remain the reservoir of the disease and annually re-infest the cattle population. The economic effects of this disease on animal production (meat, milk and the leather industry) but also on the general cattle health status, have led many European countries to launch organised control programs. The first example of definitive hypodermosis control goes back one hundred years ago when Danish farmers eradicated hypodermosis from the Danish islands by manual elimination of the warbles. Since then, more and more European countries have considered the feasibility and economic returns of such programs. The various factors which foster these programs are related to (i) biological factors, (parasite cattle specificity, synchronous biological cycles of both species of insects involved), (ii) the development of more and more efficient insecticides used only once a year by systemic application, with high efficiency at very low dosages against the first larval stage of Hypoderma spp., (iii) the development of acute techniques of detection of the disease for the monitoring of hypodermosis free countries and (iv) the durable successful results obtained in more and more European countries. Although the programs were imposed by different partners of the livestock channel production (farmers, dairy industry, leather industry) and have been engaged within the last 50 years in many European countries (Denmark, The Netherlands, Ireland, the United Kingdom, the Czech Republic, Germany, France and Switzerland) common features have emerged among these different eradication programs. They all need a preliminary statement of the economic impact of this pest and the farmers' awareness of the economic returns of such programs. The programs' efficacy depends: (i) on a good knowledge ofthe epidemiology of the parasites, (ii) on the simultaneous implementation of the control program on the whole national cattle population whatever the structure monitoring the treatments (veterinary services, farmers association), (iii) on a national Warble fly legislation making the treatments compulsory and (iv) on an acute epidemiological survey as soon as the status of a hypodermosis free country is reached and the treatments are suspended. The sanitary and financial returns of such programs are a benefit to all the partners of livestock production, to the quality of the environment and to the consumers.

PVC-based synthetic leather to provide more comfortable and sustainable vehicles

NASA Astrophysics Data System (ADS)

Maia, I.; Santos, J.; Abreu, MJ; Miranda, T.; Carneiro, N.; Soares, GMB

2017-10-01

Consumers are increasingly demanding the interior of cars to be comfortable even in the case of more economic commercial segments. Thus, the development of materials with thermoregulation properties has assumed renewed interest for these particular applications. An attempt has been made to prepare a multilayer PVC-based synthetic leather with paraffinic PCMs to be applied on a car seat. The thermal behaviour of the material was analysed using Alambeta apparatus, a thermo-camera and a thermal manikin. The results obtained show that the synthetic leather with incorporated PCMs gives cooler feeling and has higher reaction times regarding environmental temperature variations than the material without PCMs incorporation. Globally, the new designed material allowed greater thermal comfort to the cars´ inhabitants. In addition, the material quality was evaluated according to the standard of the customer, BMW 9,210,275; Edition / Version 4, 2010-10-01 revealing that the material meets all the requirements under test, except for the performance in terms of flexibility.

Occupational health risks among the workers employed in leather tanneries at Kanpur

PubMed Central

Rastogi, Subodh Kumar; Pandey, Amit; Tripathi, Sachin

2008-01-01

In a cross-sectional study, a random sample of 197 male workers drawn from different sections of 10 leather tanneries in Kanpur were selected for the assessment of health risks. A control group comprising of 117 male subjects belonging to a similar age group and socioeconomic strata, who never had any occupational exposure in the leather tanneries, were also examined for the comparison purpose. The findings revealed a significantly higher prevalence of morbidity among the exposed workers in contrast to that observed in the controls (40.1% vs. 19.6%). The respiratory diseases (16.7%) were mainly responsible for a higher morbidity among the exposed workers whereas the gastrointestinal tract problems were predominant in the control group. The urinary and blood samples collected from the exposed group showed significantly higher levels of chromium, thereby reflecting the body burden of Cr in the exposed workers as a result of a high concentration of environmental Cr at the work place. PMID:20040972

Determination of free and ethoxylated alkylphenols in leather with gas chromatography-mass spectrometry.

PubMed

Ma, He-Wei; Cheng, Ya

2010-12-10

An analytical approach was developed to determine nonylphenol (NP), octylphenol (OP), nonylphenol ethoxylates (NPEO(n)) and octylphenol ethoxylates (OPEO(n)) in leather samples involving the conversion of NPEO(n) and OPEO(n) into the corresponding NP and OP. The four targets were extracted from samples using ultrasonic-assisted acetonitrile extraction. NP and OP in the extracts were directly isolated with hexane and quantitatively determined with 4-n-nonylphenol as internal standard by gas chromatography-mass spectrometry (GC-MS). For NPEO(n) and OPEO(n) in the extracts, they were first converted into NP and OP with aluminum triiodide as cleavage agent, and the yielded NP and OP were determined by GC-MS. The contents of NPEO(n) and OPEO(n) were calculated by normalizing to NPEO(9) and OPEO(9), respectively. This method was properly validated and the real sample tests revealed the pollution significance of leather by NPEO(n) and OPEO(n). Copyright © 2010 Elsevier B.V. All rights reserved.

Comprehension and Memory of Spatial and Temporal Event Components

DTIC Science & Technology

2008-01-01

sitting in the leather chair listening to some music . [PROBE LAMP (filler)] He had headphones on, but Mary Agnes could still make out the lyrics. She...representation and processing of virtual spaces results in performance that is essentially identical to real spaces (e.g., Sun, Chan, & Campos , 2004) or with...that people treat virtual spaces in a manner very similar to real spaces (e.g., Sun, Chan, & Campos , 2004; Waller, Loomis, & Haun, 2004). The aim of

Enhancement of chromium uptake in tanning using oxazolidine.

PubMed

Sundarapandiyan, S; Brutto, Patrick E; Siddhartha, G; Ramesh, R; Ramanaiah, B; Saravanan, P; Mandal, A B

2011-06-15

Monocyclic and bicyclic oxazolidines were offered at three different junctures of chrome tanning process viz. prior to BCS offer, along with BCS and after basification. It was found that oxazolidine when offered after basification brought about better chromium uptake and reduction of chromium load in the wastewater. Offer of oxazolidine was also varied. Increase in offer of oxazolidine from 0.25% to 1% was found to enhance the chromium uptake and decrease the chromium load in wastewater. But the increase in uptake was not proportionate to the increase in oxazolidine offer more than 0.75%. Offer of 1% Zoldine ZA 78 (monocyclic oxazolidine) and Zoldine ZE (bicyclic oxazolidine) after basification brought about 63.4% and 73.1% enhancement in chrome content in leather compared to control where oxazolidine was not offered. The tone of the wetblue was found to be altered moderately. However this did not call for any process adjustments in wet-finishing. The oxazolidine treated leathers were found to be immensely fuller and tighter. It was found experimentally that offer of 1% of oxazolidine facilitated reduction in the offer of syntans administered for filling and grain tightening by around 46%. Oxazolidine could bring about significant reduction in cost of chemicals apart from resulting environmental benefits due to enhancement of chromium uptake during tanning. Copyright © 2011 Elsevier B.V. All rights reserved.

Assessment of safety and efficiency of nitrogen organic fertilizers from animal-based protein hydrolysates--a laboratory multidisciplinary approach.

PubMed

Corte, Laura; Dell'abate, Maria Teresa; Magini, Alessandro; Migliore, Melania; Felici, Barbara; Roscini, Luca; Sardella, Roccaldo; Tancini, Brunella; Emiliani, Carla; Cardinali, Gianluigi; Benedetti, Anna

2014-01-30

Protein hydrolysates or hydrolysed proteins (HPs) are high-N organic fertilizers allowing the recovery of by-products (leather meal and fluid hydrolysed proteins) otherwise disposed of as polluting wastes, thus enhancing matter and energy conservation in agricultural systems while decreasing potential pollution. Chemical and biological characteristics of HPs of animal origin were analysed in this work to assess their safety, environmental sustainability and agricultural efficacy as fertilizers. Different HPs obtained by thermal, chemical and enzymatic hydrolytic processes were characterized by Fourier transform infrared spectroscopy and sodium dodecyl sulfate polyacrylamide gel electrophoresis, and their safety and efficacy were assessed through bioassays, ecotoxicological tests and soil biochemistry analyses. HPs can be discriminated according to their origin and hydrolysis system by proteomic and metabolomic methods. Three experimental systems, soil microbiota, yeast and plants, were employed to detect possible negative effects exerted by HPs. The results showed that these compounds do not significantly interfere with metabolomic activity or the reproductive system. The absence of toxic and genotoxic effects of the hydrolysates prepared by the three hydrolytic processes suggests that they do not negatively affect eukaryotic cells and soil ecosystems and that they can be used in conventional and organic farming as an important nitrogen source derived from otherwise highly polluting by-products. © 2013 Society of Chemical Industry.

Anxiety-like behaviour in mice exposed to tannery wastewater: The effect of photoelectrooxidation treatment.

PubMed

Siqueira, Ionara Rodrigues; Vanzella, Cláudia; Bianchetti, Paula; Rodrigues, Marco Antonio Siqueira; Stülp, Simone

2011-01-01

The leather industry is a major producer of wastewaters and releases large quantities of many different chemical agents used in hide processing into the environment. Since the central nervous system is sensitive to many different contaminants, our aim was to investigate the neurobehavioral effects of exposure of mice to tannery effluents using animal models of depression and anxiety, namely forced swim and elevated plus-maze. In order to propose a clean technology for the treatment of this effluent, we also investigated the exposure of mice to effluents treated by photoelectrooxidation process (PEO). Adult male Swiss albino mice (CF1 strain) were given free access to water bottles containing an effluent treated by a tannery (non-PEO) or PEO-treated tannery wastewater (0.1 and 1% in drinking water). Exposure to tannery wastewater induced behavioural changes in the mice in elevated plus-maze. Exposure to non-PEO 1% decreased the percentage of time spent in the open arms, indicating anxiety-like behaviour. Exposure to tannery wastewater did not alter immobility time in the forced swim test, suggesting that tannery effluents did not induce depression-like behaviour in the mice. These behavioural data suggest that non-PEO tannery effluent has an anxiogenic effect, whereas PEO-treated tannery effluents do not alter anxiety levels. Copyright © 2011 Elsevier Inc. All rights reserved.

Cow dung: a potential biomass substrate for the production of detergent-stable dehairing protease by alkaliphilic Bacillus subtilis strain VV.

PubMed

Vijayaraghavan, Ponnuswamy; Vijayan, Aija; Arun, Arumugaperumal; Jenisha, John Kennady; Vincent, Samuel Gnana Prakash

2012-01-01

Cow dung, a cheap and easily available source of energy, was used as the substrate for the production of alkaline protease by solid-state fermentation using the Bacillus subtilis strain VV. In order to achieve the maximum yield of this enzyme, the following optimum process parameters are needed: fermentation period (72 h), pH (10.0), moisture content (140%), inoculum (25%), temperature (30-40°C), carbon source (2% (w/w) maltose) and nitrogen source (1% (w/w) urea). The protease was stable over a broad temperature range (30-50°C) and pH (8.0-10.0), with maximum activity at 50°C and pH 10.0. Among the divalent ions tested, Ca(2+) (0.01 M) increased enzyme activity. The purified protease, after being subjected to sodium dodecyl sulphate-polyacrylamide gel electrophoresis, was found to have a molecular mass of 38.5 kDa. The enzyme was solvent-and surfactant-stable and showed activity even after 24 h incubation along with various commercially available detergents. This enzyme possessed dehairing properties for animal hide after 16 h of incubation at room temperature. From these results it is evident that cow dung is a potential substrate for the production of a detergent-stable, dehairing protease by B. subtilis. This enzyme has a lot of potential applications in the detergent and leather-processing industries.

Antropometric parameters problem solving of shoe lasts by deforming membranes with medium weight

NASA Astrophysics Data System (ADS)

Albu, A. V.; Anghel Drugarin, C. V.; Barla, E. M.; Porav, V.

2018-01-01

The paper presents research results into getting a virtual model of shoe last and anthropometric parameters change. The most important change occurs in the fingers region. Alternatives CAD-CAM technology for next generation is based on DELCAM software for the CAM procedure and simulation of MATLAB software. This research has led to the virtual changes of the last, anthropometric parameter - the width of the fingers (ld) and shoe last length - (Lp) and images have been achieved with the representation in section of the shoe last changed from the original shoe lasts by FEM method (Finite element method) in MATLAB environment. The results are applied in the textile industry and in the elaboration of linings consumption or in the development of leather substitutes on fabric, knitted or woven material type.

Survey of dimethyl fumarate in desiccant products during 2009 in Italy.

PubMed

Stefanelli, Patrizia; Girolimetti, Silvana; Santilio, Angela; Dommarco, Roberto

2011-04-01

Dimethyl fumarate (DMFu) is a substance with remarkable hygroscopicity and fungicidal power, which has recently showed to be a strong sensitizer to humans. The use of DMFu in little desiccant pouches, for e.g. in handbags or footwear boxes, might result in the contamination of leather products, with the subsequent exposure to consumers by contact. In 2009, 153 samples of desiccant material were collected from leather manufactures all over Italy and analyzed for DMFu. Results proved to fall in a wide range (0.14-7145 mg/kg).

The Effects of Tropical and Leather Combat Boots on Lower Extremity Disorders Among US Marine Corps Recruits

DTIC Science & Technology

1976-03-01

tape up the back and around the top and a 5.08-cm wide, nylon webbing diagonally across the ankle . The leather insole is split into two pieces and a...from a platoon (Table 1). The category of ankle fracture and/or sprain is a tally of the number of recruits reporting the occurrence of an ankle or...foot fracture within the previous four years, a recent ankle sprain, or a history of chronic ankle sprain. Next to pes planus, this category included

Army Personnel Complied with the Berry Amendment but Can Improve Compliance with the Buy American Act

DTIC Science & Technology

2014-11-07

tools; • FSG 52 – measuring tools; • FSG 83 – textiles, leather, furs, apparel , and shoes; • FSG 84 – clothing , individual equipment and insignia; and...include: FSG 51 (Hand tools), 52 (Measuring tools), 83 (Textiles, leather, furs, apparel , and shoes), 84 ( Clothing , individual equipment and insignia...No. DODIG-2015-026 N O V E M B E R 7 , 2 0 1 4 Army Personnel Complied With the Berry Amendment But Can Improve Compliance With the Buy American

Spontaneous abortions and reproductive selection mechanisms in the rubber and leather industry in Finland

PubMed Central

Hemminki, K; Niemi, Marja-Liisa; Kyyrönen, P; Kilpikari, I; Vainio, H

1983-01-01

ABSTRACT Spontaneous abortions in hospitals were analysed from two sources—membership files of the Union of Rubber and Leather Workers (about 10 000 women) and records of the personnel of a rubber factory (about 1600 women). Two frequencies of spontaneous abortions were calculated for each population analysed: rate (No spontaneous abortions X 100/No pregnancies) and ratio (No spontaneous abortions X 100/No births). The two frequencies were increased for all union members compared with all Finnish women. The frequencies, however, did not appreciably differ when the pregnancies occurred during union membership as compared with the pregnancies before or after membership. The frequency of spontaneous abortions was higher for the short-time union members than for those employed for longer periods, but the increased frequency did not correlate with union membership. The employees of a rubber factory had slightly fewer spontaneous abortions on average than the community population. The women employed in the rubber factory for three to 23 months were found to have appreciably higher frequencies of spontaneous abortions than the women employed for longer periods. The present study showed the feasibility of using cases of spontaneous abortions in hospitals in an occupational study with longitudinal employment data. Women with short periods of employment appeared to have more spontaneous abortions than those with longer periods of employment suggesting the presence of selection mechanisms, perhaps with some analogies to the “healthy worker effect” in occupational mortality studies. The presence of such selection mechanisms deserve serious consideration in occupational reproductive epidemiology. PMID:6824605

Adsorption of leather dye onto activated carbon prepared from bottle gourd: equilibrium, kinetic and mechanism studies.

PubMed

Foletto, Edson Luiz; Weber, Caroline Trevisan; Paz, Diego Silva; Mazutti, Marcio Antonio; Meili, Lucas; Bassaco, Mariana Moro; Collazzo, Gabriela Carvalho

2013-01-01

Activated carbon prepared from bottle gourd has been used as adsorbent for removal of leather dye (Direct Black 38) from aqueous solution. The activated carbon obtained showed a mesoporous texture, with surface area of 556.16 m(2) g(-1), and a surface free of organic functional groups. The initial dye concentration, contact time and pH significantly influenced the adsorption capacity. In the acid region (pH 2.5) the adsorption of dye was more favorable. The adsorption equilibrium was attained after 60 min. Equilibrium data were analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherm models. The equilibrium data were best described by the Langmuir isotherm, with maximum adsorption capacity of 94.9 mg g(-1). Adsorption kinetic data were fitted using the pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models. The adsorption kinetic was best described by the second-order kinetic equation. The adsorption process was controlled by both external mass transfer and intraparticle diffusion. Activated carbon prepared from bottle gourd was shown to be a promising material for adsorption of Direct Black 38 from aqueous solution.

Improvement of Technological Properties of a Vegetal Tanning Agent in Gas Discharge Plasma

NASA Astrophysics Data System (ADS)

Khairullin, A. K.; Voznesensky, E. F.; Rakhmatullina, G. R.; Sabirov, A. M.; Tikhonova, N. V.

2017-11-01

The article considers the possibility of modification of the vegetal tanning agent quebracho in the plasma of a radio-frequency induction discharge at low pressure. It is established that plasma treatment leads to a decrease in the size of colloid fractions and a decrease in the molecular weight, while the functionality of the vegetal tanning agent is preserved. Application of the obtained product in the process of leather retanning allows improving its physical, mechanical and consumer properties.

The environmental risk as a culture in the Sinos Valley, Brazil.

PubMed

Pedde, Valdir; Figueiredo, João A; Tundisi, José G; Lenz, Cátia A

2014-12-01

The proposal of analysis of the social-environmental perception will be developed from the discourse as a constitutive element of reality. The discourse practices and their concretion will be the source of meaning and social-cultural value. Thus, the chosen research method was the qualitative and quantitative case study. In the first part of the text we will recapture a theoretical input by Mary Douglas on risk and culture, as well as on the acceptance of the risks in society. In the second part, we cover a few data of the case of the risks resulting from the tanning industry and on how the society of the "Vale do Rio dos Sinos" relates to these risks. In this article we conclude that risk perception of the population is directly related with past experiences, thus, assigning a meaning to all new events. This meaning is the result of a sociocultural construction. It is worth noting that behind this history, there are basic issues related to population survival, i.e., both the industrialists and workers establish partnerships when the society creates a movement against the leather industry.

The environmental risk as a culture in the Sinos Valley, Brazil.

PubMed

Pedde, Valdir; Figueiredo, João A; Tundisi, José G; Lenz, Cátia A

2014-12-09

The proposal of analysis of the social-environmental perception will be developed from the discourse as a constitutive element of reality. The discourse practices and their concretion will be the source of meaning and social-cultural value. Thus, the chosen research method was the qualitative and quantitative case study. In the first part of the text we will recapture a theoretical input by Mary Douglas on risk and culture, as well as on the acceptance of the risks in society. In the second part, we cover a few data of the case of the risks resulting from the tanning industry and on how the society of the "Vale do Rio dos Sinos" relates to these risks. In this article we conclude that risk perception of the population is directly related with past experiences, thus, assigning a meaning to all new events. This meaning is the result of a sociocultural construction. It is worth noting that behind this history, there are basic issues related to population survival, i.e., both the industrialists and workers establish partnerships when the society creates a movement against the leather industry.

Occupational cancer in Italy: evaluating the extent of compensated cases in the period 1994-2006.

PubMed

Scarselli, Alberto; Scano, Patrizia; Marinaccio, Alessandro; Iavicoli, Sergio

2009-11-01

The aim of this study is to analyze occupational cancer claims compensated in the industrial sector in Italy between 1994 and 2006. A descriptive analysis of compensated occupational cancers based on the Italian Workers' Compensation Authority (INAIL) data was performed. Summary statistics were compiled by sex and age of worker, cancer type, workplace agent and economic sector. The temporal trend in the period 1994-2006 was investigated for the most frequently compensated cancers (mesothelioma and lung cancer from asbestos; nasal cavities cancer from wood and leather dust). Between 1994 and 2006, 6,243 cancer claims were compensated by INAIL due to occupational exposure in the industrial sector. Most (5,288, or 85%) of these compensated claims occurred in the period 2000-2006, when the annual mean of the most compensated cancers increased approximately four times compared to the period 1994-1999. There is an increasing trend in compensation for work-related cancers in Italy in recent years, even if occupational cancers are still widely underreported. (c) 2009 Wiley-Liss, Inc.

Effects of Apple Juice Concentrate, Blackcurrant Concentrate and Pectin Levels on Selected Qualities of Apple-Blackcurrant Fruit Leather.

PubMed

Diamante, Lemuel M; Li, Siwei; Xu, Qianqian; Busch, Janette

2013-09-12

A study was conducted to determine the effects of different levels of apple juice concentrate (AJC), blackcurrant concentrate (BCC) and pectin on the moisture content, water activity, color, texture and ascorbic acid content of apple-blackcurrant fruit leather using the response surface methodology. The results showed the moisture content increased with increasing pectin level and with greater increases at higher AJC and BCC levels while the water activity increased with increasing pectin level and with increasing AJC level, at low pectin levels, but with decreasing AJC, at high pectin levels. The chroma decreased with increasing pectin level and with lower values at the middle AJC level. The puncturing force decreased with increasing AJC level but with a lower value at the middle pectin level. Lastly, the ascorbic acid content increased with increasing BCC level regardless of AJC and pectin levels. There is a need to reduce the drying temperature or time of apple-blackcurrant fruit leather just enough to bring the water activity closer to 0.60, thereby increasing the moisture content resulting in higher product yield.

Formulation and acceptability of foam mat dried seabuckthorn (Hippophae salicifolia) leather.

PubMed

Kaushal, Manisha; Sharma, P C; Sharma, Rakesh

2013-02-01

Technology for utilization of seabuckthorn berries for preparation of fruit leather/bar was optimized by modifying the foam mat drying technique. The conversion of seabuckthorn juice/pulp into foam was standardized by whipping the pulp after addition of CMC @ 0-3% at 5 °C and drying the resultant foam in dehydrator (55 ± 2 °C) to a moisture content of about 12-14%. The fruit bar prepared from sulphited juice/pulp wrapped in a butter paper followed by packing in polyethylene pouches (20 g) and stored at ambient temperature (14.6-26.1 °C) experienced least changes in quality attributes like ascorbic acid (1045.7 mg/100 g vs 997.5 mg/100 g) and carotenoids (80.4 mg/100 g vs 72.3 mg/100 g) as compared to the leather made from the unsulphited pulp. Storage studies indicate that fruit bars are mildly hygroscopic (0.46-0.65) and can be stored within the RH of 46-65% at room temperature.

Effects of Apple Juice Concentrate, Blackcurrant Concentrate and Pectin Levels on Selected Qualities of Apple-Blackcurrant Fruit Leather

PubMed Central

Diamante, Lemuel M.; Li, Siwei; Xu, Qianqian; Busch, Janette

2013-01-01

A study was conducted to determine the effects of different levels of apple juice concentrate (AJC), blackcurrant concentrate (BCC) and pectin on the moisture content, water activity, color, texture and ascorbic acid content of apple-blackcurrant fruit leather using the response surface methodology. The results showed the moisture content increased with increasing pectin level and with greater increases at higher AJC and BCC levels while the water activity increased with increasing pectin level and with increasing AJC level, at low pectin levels, but with decreasing AJC, at high pectin levels. The chroma decreased with increasing pectin level and with lower values at the middle AJC level. The puncturing force decreased with increasing AJC level but with a lower value at the middle pectin level. Lastly, the ascorbic acid content increased with increasing BCC level regardless of AJC and pectin levels. There is a need to reduce the drying temperature or time of apple-blackcurrant fruit leather just enough to bring the water activity closer to 0.60, thereby increasing the moisture content resulting in higher product yield. PMID:28239127

DOE Office of Scientific and Technical Information (OSTI.GOV)

Secchieri, M.; Benassi, C.A.; Pastore, S.

A method for the quail-quantitative evaluation of pentachlorophenol (PCP) in solid matrixes has been developed. The procedure is based on solid-liquid extraction of solid samples (leather or wood), followed by purification on a cyanopropyl column and determination of the preservative by second derivative UV spectroscopy considering the PCP A peak-through value (304-297 nm). The method allows rapid PCP determination in the concentration range 1-40 micrograms/mL; any matrix interference is avoided by the purification step and recoveries of the preservative were 99.12% (RSD% 0.13) for the leather matrix and 98.03 (RSD% 0.17) for the wood matrix.

Cancer mortality among workers in the Tuscan tanning industry.

PubMed Central

Costantini, A S; Paci, E; Miligi, L; Buiatti, E; Martelli, C; Lenzi, S

1989-01-01

The mortality of 2926 male workers at the tanneries in the "leather area" of Tuscany was examined from 1950 to 1983 comparing it with the national mortality. Cancer mortality was of particular concern because of the many chemicals known to be definite or suspected carcinogens used in the tanning cycle, in particular chromate pigments, benzidine based dyes, formaldehyde, and organic solvents. There was no excess of deaths for cancers of all sites but slight increases in deaths from cancer of the lung (SMR = 131, CI 95% = 88-182), bladder (SMR = 150, CI 95% = 48-349), kidney (SMR = 323, CI 95% = 86-827), pancreas (SMR = 146, CI 95% = 39-373), and leukaemias (SMR = 164, CI 95% = 53-382) occurred. Two cases of soft tissue sarcomas were observed versus 0.09 expected (SMR = 2178, CI 95% = 250-8023). PMID:2818971

Acute pulmonary toxicity following occupational exposure to a floor stain protector in the building industry in Switzerland.

PubMed

Lazor-Blanchet, Catherine; Rusca, Sophie; Vernez, David; Berry, Raymond; Albrecht, Eric; Droz, Pierre-Olivier; Boillat, Marcel-André

2004-05-01

Waterproofing agents are widely applied to leather and textile garments; they are also used as floor stain protectors by professionals. Acute respiratory injury is described in three cases of young healthy adults following occupational inhalation of a new waterproofing formulation containing an acrylate fluoropolymer. Within 1 or 2 h after exposure they developed a rapidly progressive dyspnoea; two of them had hypoxaemia and flu-like reactions. All patients improved with supportive treatment in a few days. The mechanism of toxicity is still under investigation, but experimental data suggest the role of this new acrylate fluoropolymer. Tilers should be warned against spraying floor stain repellents; there is also a need to make consumers aware that the spraying of waterproofing agents in a closed environment and concomitant smoking should be avoided.

Preparation, characterization and application of dispersible and spherical Nano-SiO2@Copolymer nanocomposite in leather tanning

NASA Astrophysics Data System (ADS)

Pan, Hui; Li, Guang-Long; Liu, Rui-Qi; Wang, Su-Xia; Wang, Xiao-Dong

2017-12-01

Dispersible and spherical silica nanoparticles (nano-SiO2) were prepared with tetraethyl silicate and different surface-modifiers via a simple method. The silica nanoparticles surface-modified with methacryloxy (propyl) trimethoxysilane (denoted as MPS-SiO2), dimethyl diallyl ammoniumchloride (denoted as DMDAAC-SiO2) and poly (methacrylic acid) (denoted as PMAA-SiO2) which are known as hydrophobic, amphiphilic and hydrophilic modifiers, respectively, exhibited excellent dispersibility in various solvents or polymer matrix. The obtained bare silica nanoparticles, MPS-SiO2, DMDAAC-SiO2 and PMAA-SiO2 were characterized by Fourier transform infrared spectra (FTIR), thermogravimetric analysis (TGA), transmission electron microscope (TEM) and scanning electron microscope (SEM). A series of nanocomposites (denoted as SiO2/P, MPS-SiO2/P, DMDAAC-SiO2/P and PMAA-SiO2/P, respectively) were also prepared with the bare or surface-modified silica nanoparticles and methacrylic acid-co-acrylamide-co-acrylonitrile-co-salicylic acid tetrabasic copolymer (denoted as PMAAS) and applied in leather tanning. Compared with those of the leather tanned with the commercial acrylic resin (CHINATAN OM) and pure tetrabasic copolymer tanning agents, the physical and mechanical properties, rheological properties and thermal stabilities of the leather treated with SiO2/P, MPS-SiO2/P, DMDAAC-SiO2/P or PMAA-SiO2/P founded to be improved in a significant way. Moreover, the highest shrinkage temperature of the wet-white sheepskin tanned with PMAA-SiO2/P reached to 76 °C and the thickness increase reached to 105%.

Effect of microbial activities on stored raw buffalo hide.

PubMed

Shede, P N; Kanekar, P P; Polkade, A V; Sarnaik, S S; Dhakephalkar, P K; Chiplonkar, S A; Nilegaonkar, S S

2009-11-01

'Keeping qualities' of hides are dependent on the total microbial flora associated with the hides and the biochemical changes brought about by these microorganisms during short-term storage at ambient temperature (28 +/- 2 degrees C). It was evident that within first 24 hr of hide's ambient storage, bacterial load was raised to 8.8 log cfu g(-1) hide from 6.1 log cfu g(-1) hide. Nonlinear parabolic increase in release of hydroxyproline and tyrosine from stored hide was observed starting from 0 hr and confirming proteolytic activities. Continuous release of CO2 from the stored hide suggested its mineralization. Exponential release of free fatty acids during storage indicated simultaneous lipolysis. Thus the process of biodegradation during the course of ambient storage of hide piece was found to progress steadily and seems to be interrelated as well as very complex. During the storage period, the liquefaction of hide piece was also observed visually within 96 hr. Present studies of assessment of bacterial activities on hide with respect to total bacterial load, release of amino acids, free fatty acids and evolved CO2 provide data that can be used to formulate and evaluate hide curing agent(s) other than salt, thus rendering leather industry a platform to design bio-based technologies for efficient and ecofriendly preservation of raw materials.

Biomedical Applications Of Aromatic Azo Compounds: From Chromophore To Pharmacophore.

PubMed

Ali, Yousaf; Hamid, Shafida Abd; Rashid, Umer

2018-05-23

Azo dyes are widely used in textile, fiber, cosmetic, leather, paint and printing industries. Besides their characteristic coloring function, biological properties of certain azo compounds including antibacterial, antiviral, antifungal and cytotoxic are also reported. Azo compounds can be used as drug carriers, either by acting as a 'cargo' that entrap therapeutic agents or by prodrug approach. The drug is released by internal or external stimuli in the region of interest, as observed in colon-targeted drug delivery. Besides drug-like and drug carrier properties, a number of azo dyes are used in cellular staining to visualize cellular components and metabolic processes. However, the biological significance of azo compounds, especially in cancer chemotherapy, is still in its infancy. This may be linked to early findings that declared azo compounds as one of the possible causes of cancer and mutagenesis. Currently, researchers are screening the aromatic azo compounds for their potential biomedical use, including cancer diagnosis and therapy. The medical applications of azo compounds, particularly in cancer research are discussed. The biomedical significance of cis-trans interchange and negative implications of azo compounds are also highlighted in brief. This review may provide the researchers a platform in the quest of more potent therapeutic agents of this class. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Superfund Record of Decision (EPA Region 7): Mid-America Tanning site, Sergeant bBluff, IA. (First remedial action), September 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-09-24

The 98.7-acre Mid-America Tanning site is a former leather tannery in Sergeant Bluff, Woodbury County, Iowa. Surrounding land use is mixed industrial and agricultural. A portion of the site is bordered by Oxbow Lake and lies within the 100-year floodplain. The Missouri River is approximately 1.5 miles to the southwest of the site and receives discharges from Oxbow Lake. The facility began onsite processing of animal hides in 1970. In 1980, the State confirmed the onsite burial of chromium-containing sludge in trenches, and the company was cited for permit violations. A 1985 EPA investigation identified excessive chromium contamination in onsitemore » soil, sediment, and ground water. In 1990, EPA conducted a removal action that included excavating and consolidating onsite 1,290 cubic yards of sludge from the trench disposal area. The Record of Decision (ROD) addresses the contaminated soil, impoundment sediment and water, and the excavated trench material. A future ROD will address onsite ground water contamination. The primary contaminant of concern affecting the soil, sediment, debris, sludge, and surface water are metals including chromium and lead. The selected remedial action for the site is included.« less

Cr(VI) and Cr(III) removal from aqueous solution by raw and modified lignocellulosic materials: a review.

PubMed

Miretzky, P; Cirelli, A Fernandez

2010-08-15

In aqueous systems, chromium usually exists in both trivalent and hexavalent oxidation states, being Cr(VI) of particular importance and concern due to its great toxicity. Industrial sources of Cr(VI) are leather tanning, mining of chrome ore, production of steel and alloys, etc. The most common conventional method for Cr(VI) removal is reduction to Cr(III) at pH 2.0 and precipitation of Cr (OH)(3) with lime at pH 9-10. The disadvantage of precipitation is the disposal of the solid waste. Adsorption of Cr by different low cost materials seems to be a suitable choice for wastewater treatment. Many by-products of agriculture have proved to be suitable low cost adsorbents for Cr(VI) and Cr(III) removal from water. Lignocellulosic residues, which include both wood residues and agricultural residues, have adsorption capacity comparable to other natural sorbents, but they have the advantage of very low or no cost, great availability and simple operational process. This study is a review of the recent literature on the use of natural and modified lignocellulosic residues for Cr adsorption. The Cr maximum adsorption capacity and the adsorption mechanism under different experimental conditions are reported when possibly. Copyright 2010 Elsevier B.V. All rights reserved.

Amylolytic bacterial lactic acid fermentation - a review.

PubMed

Reddy, Gopal; Altaf, Md; Naveena, B J; Venkateshwar, M; Kumar, E Vijay

2008-01-01

Lactic acid, an enigmatic chemical has wide applications in food, pharmaceutical, leather, textile industries and as chemical feed stock. Novel applications in synthesis of biodegradable plastics have increased the demand for lactic acid. Microbial fermentations are preferred over chemical synthesis of lactic acid due to various factors. Refined sugars, though costly, are the choice substrates for lactic acid production using Lactobacillus sps. Complex natural starchy raw materials used for production of lactic acid involve pretreatment by gelatinization and liquefaction followed by enzymatic saccharification to glucose and subsequent conversion of glucose to lactic acid by Lactobacillus fermentation. Direct conversion of starchy biomass to lactic acid by bacteria possessing both amylolytic and lactic acid producing character will eliminate the two step process to make it economical. Very few amylolytic lactic acid bacteria with high potential to produce lactic acid at high substrate concentrations are reported till date. In this view, a search has been made for various amylolytic LAB involved in production of lactic acid and utilization of cheaply available renewable agricultural starchy biomass. Lactobacillus amylophilus GV6 is an efficient and widely studied amylolytic lactic acid producing bacteria capable of utilizing inexpensive carbon and nitrogen substrates with high lactic acid production efficiency. This is the first review on amylolytic bacterial lactic acid fermentations till date.

Ozonation-based decolorization of food dyes for recovery of fruit leather wastes.

PubMed

Zhu, Wenda; Koziel, Jacek A; Cai, Lingshuang; Brehm-Stecher, Byron F; Ozsoy, H Duygu; van Leeuwen, J Hans

2013-08-28

Commercial manufacture of fruit leathers (FL) usually results in a portion of the product that is out of specification. The disposition of this material poses special challenges in the food industry. Because the material remains edible and contains valuable ingredients (fruit pulp, sugars, acidulates, etc.), an ideal solution would be to recover this material for product rework. A key practical obstacle to such recovery is that compositing of differently colored wastes results in an unsalable gray product. Therefore, a safe and scalable method for decolorization of FL prior to product rework is needed. This research introduces a novel approach utilizing ozonation for color removal. To explore the use of ozonation as a decolorization step, we first applied it to simple solutions of the commonly used food colorants 2-naphthalenesulfonic acid (Red 40), tartrazine (Yellow 5), and erioglaucine (Blue 1). Decolorization was measured by UV/vis spectrometry at visible wavelengths and with a Hunter colorimeter. Volatile and semivolatile byproducts from ozone-based colorant decomposition were identified and quantified with solid phase microextraction coupled with gas chromatography-mass spectrometry (SPME-GC-MS). Removal of Yellow 5, Red 40 and Blue 1 of about 65%, 80%, and 90%, respectively, was accomplished with 70 g of ozone applied per 1 kg of redissolved and resuspended FL. Carbonyl compounds were identified as major byproducts from ozone-induced decomposition of the food colorants. A conservative risk assessment based on quantification results and published toxicity information of potentially toxic byproducts, determined that ozone-based decolorization of FL before recycling is acceptable from a safety standpoint. A preliminary cost estimate based on recycling of 1000 tons of FL annually suggests a potential of $275,000 annual profit from this practice at one production facility alone.

ASAS Centennial Paper: Impact of animal science research on United States goat production and predictions for the future.

PubMed

Sahlu, T; Dawson, L J; Gipson, T A; Hart, S P; Merkel, R C; Puchala, R; Wang, Z; Zeng, S; Goetsch, A L

2009-01-01

Goat research in the United States has increased but at a rate less than that in production. Research on goat meat includes nutritional quality, packaging, color, sensory characteristics, and preslaughter management. Goat skins have value for leather, but quality of goat leather has not been extensively studied. Research in the production, quality, antibiotic residues, and sensory characteristics of goat milk and its products has aided development of the US dairy goat industry. Limited progress has been made in genetic improvement of milk or meat production. There is need to explore applications of genomics and proteomics and improve consistency in texture and functionality of goat cheeses. New goat meat and milk products are needed to increase demand and meet the diverse tastes of the American public. Despite research progress in control of mohair and cashmere growth, erratic prices and sale of raw materials have contributed to further declines in US production. Innovative and cooperative ventures are needed for profit sharing up to the consumer level. Internal parasites pose the greatest challenge to goat production in humid areas largely because of anthelmintic resistance. Study of alternative controls is required, including immunity enhancement via nutrition, vaccination, pasture management such as co-grazing with cattle, and genetic resistance. Similarly, the importance of health management is increasing related in part to a lack of effective vaccines for many diseases. Nutrition research should address requirements for vitamins and minerals, efficiencies of protein utilization, adjusting energy requirements for nutritional plane, acclimatization, and grazing conditions, feed intake prediction, and management practices for rapid-growth production systems. Moreover, efficient technology transfer methods are needed to disseminate current knowledge and that gained in future research.

Est16, a New Esterase Isolated from a Metagenomic Library of a Microbial Consortium Specializing in Diesel Oil Degradation.

PubMed

Pereira, Mariana Rangel; Mercaldi, Gustavo Fernando; Maester, Thaís Carvalho; Balan, Andrea; Lemos, Eliana Gertrudes de Macedo

2015-01-01

Lipolytic enzymes have attracted attention from a global market because they show enormous biotechnological potential for applications such as detergent production, leather processing, cosmetics production, and use in perfumes and biodiesel. Due to the intense demand for biocatalysts, a metagenomic approach provides methods of identifying new enzymes. In this study, an esterase designated as Est16 was selected from 4224 clones of a fosmid metagenomic library, revealing an 87% amino acid identity with an esterase/lipase (accession number ADM63076.1) from an uncultured bacterium. Phylogenetic studies showed that the enzyme belongs to family V of bacterial lipolytic enzymes and has sequence and structural similarities with an aryl-esterase from Pseudomonas fluorescens and a patented Anti-Kazlauskas lipase (patent number US20050153404). The protein was expressed and purified as a highly soluble, thermally stable enzyme that showed a preference for basic pH. Est16 exhibited activity toward a wide range of substrates and the highest catalytic efficiency against p-nitrophenyl butyrate and p-nitrophenyl valerate. Est16 also showed tolerance to the presence of organic solvents, detergents and metals. Based on molecular modeling, we showed that the large alpha-beta domain is conserved in the patented enzymes but not the substrate pocket. Here, it was demonstrated that a metagenomic approach is suitable for discovering the lipolytic enzyme diversity and that Est16 has the biotechnological potential for use in industrial processes.

Buffing dust as a filler of carboxylated butadiene-acrylonitrile rubber and butadiene-acrylonitrile rubber.

PubMed

Chronska, K; Przepiorkowska, A

2008-03-01

Buffing dust from chrome tanned leather is one of the difficult tannery wastes to manage. It is also hazardous to both human health and the environment. The scientific literature rarely reports studies on dust management, especially on its utilization as a filler for elastomers. In this connection we have made an attempt to use this leather waste as a filler for rubbers such as XNBR and NBR. The addition of the buffing dust to rubber mixes brought improvement in mechanical properties, and increase in resistance to thermal ageing as well as in electric conductivity and crosslink density of vulcalizates.

Finding of No Significant Impact: Construction, Operation, and Maintenance of a Solar Array United States Air Force Academy, Colorado

DTIC Science & Technology

2010-04-21

2006·EX·L, Leather , Nice! 26k mi $17,977 #B21244A 1~-8556 ACCORD EX 11)01· V6, Auto,lthr, Moon Roof. #6302A $6,988 HEUBERGER MOTORS 475-1920...ns’~fl8~\\!Tv DODGE FIT 2009·Sport Pkg, Auto, Loaded #101399A $15,988 HEUIIEIIGER MOTORS 475-1920 Hyundai • Cars SONATALTD2008· Auto, Leather ...37Sol C <:LASS 󈧌-Every Op· bon, NAV, Black/ Tan . $27,999 #G343 WHY PAY R!TAIU SMART CHOICE AUTO 641·37Sol E3502006 $31),995 #U678 Red

Eco-friendly approach towards green synthesis of zinc oxide nanocrystals and its potential applications.

PubMed

Velmurugan, Palanivel; Park, Jung-Hee; Lee, Sang-Myeong; Yi, Young-Joo; Cho, Min; Jang, Jum-Suk; Myung, Hyun; Bang, Keuk-Soo; Oh, Byung-Taek

2016-09-01

In the present study, we investigated a novel green route for synthesis of zinc oxide (ZnO) nanocrystals using Prunus × yedoensis Matsumura leaf extract as a reducing agent without using any surfactant or external energy. Standard characterization studies were carried out to confirm the obtained product using UV-Vis spectra, SEM-EDS, FTIR, TEM, and XRD. In addition, the synthesized ZnO nanocrystals were coated onto fabric and leather samples to study their bacteriostatic effect against odor-causing bacteria Brevibacterium linens and Staphylococcus epidermidis. Zinc oxide nanocrystal-coated fabric and leather showed good activity against both bacteria.

Kinetic model of the thermal pyrolysis of chrome tanned leather treated with NaOH under different conditions using thermogravimetric analysis.

PubMed

Bañón, E; Marcilla, A; García, A N; Martínez, P; León, M

2016-02-01

The thermal decomposition of chrome tanned leather before and after a soaking treatment with NaOH was studied using thermogravimetric analysis (TGA). The effect of the solution concentration (0.2M and 0.5M) and the soaking time (5min and 15min) was evaluated. TGA experiments at four heating rates (5, 10, 15 and 20°Cmin(-1)) were run in a nitrogen atmosphere for every treatment condition. A kinetic model was developed considering the effect of the three variables studied, i.e.: the NaOH solution concentration, the soaking time and the heating rate. The proposed model for chrome tanned leather pyrolysis involves a set of four reactions, i.e.: three independent nth order reactions, yielding the corresponding products and one of them undergoing a successive cero order reaction. The model was successfully applied simultaneously to all the experimental data obtained. The evaluation of the kinetic parameters obtained (activation energy, pre-exponential factor and reaction order) allowed a better understanding of the effect of the alkali treatment on these wastes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Development of Extraction Methods for the Analysis of Perfluorinated Compounds in Leather with High Performance Liquid Chromatography Tandem Mass Spectrometry

NASA Astrophysics Data System (ADS)

Zhang, Yan; Wang, Youchao; Tang, Chuanjiang; Nie, Jingmei; Xu, Chengtao

2018-01-01

Perfluorinated compounds (PFCs), used to provide water, oil, grease, heat and stain repellency to a range of textile and other products, have been found to be persistent in the environment and are associated with adverse effects on humans and wildlife. This study presents the development and validation of an analytical method to determine the simultaneous presence of eleven PFCs in leather using solid-phase extraction followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The perfluorinated compounds were primarily extracted from the samples by a liquid extraction procedure by ultrasonic, in which the parameters were optimized. Then the solid-phase extraction (SPE) is the most important advantages of the developed methodology. The sample volume and elution conditions were optimized by means of an experimental design. The proposed method was applied to determine the PFCs in leather, where the detection limits of the eleven compounds were 0.09-0.96 ng/L, and the recoveries of all compounds spiked at 5 ng/L concentration level were in the range of 65-96%, with a better RSD lower than 19% (n = 7).

Antimicrobial fabrication of cotton fabric and leather using green-synthesized nanosilver.

PubMed

Velmurugan, Palanivel; Cho, Min; Lee, Sang-Myeong; Park, Jung-Hee; Bae, Sunyoung; Oh, Byung-Taek

2014-06-15

This study aims to investigate the green synthesis of silver nanoparticles (AgNPs) by Erigeron annuus (L.) pers flower extract as reducing and capping agent, and evaluation of their antibacterial activities for the first time. The obtained product was confirmed by UV-Vis spectrum, high resolution-transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction studies. The optimum AgNPs production was achieved at pH 7, metal silver (Ag(+) ion) concentration of 2.0mM, flower extract concentration 4%, and time 335 min. In addition, the antibacterial activity of cotton fabrics and tanned leather loaded with AgNPs, commercial AgNPs, flower extract, Ag(+) ion and blend of flower extract with AgNPs were evaluated against Gram-positive odor causing bacteria Brevibacterium linens and Staphylococcus epidermidis. The results showed maximum zone of inhibition (ZOI) by the cotton fabrics embedded with blend of flower extract and AgNPs against B. linens. The structure and morphology of cotton fabric and leather samples embedded with AgNPs, Ag(+) ion and blend of flower extract with AgNPs were examined under field emission scanning electron microscope. Copyright © 2014 Elsevier Ltd. All rights reserved.

Diffusion and Binding of Laponite Clay Nanoparticles into Collagen Fibers for the Formation of Leather Matrix.

PubMed

Shi, Jiabo; Wang, Chunhua; Ngai, To; Lin, Wei

2018-06-13

Understanding accessibility and interactions of clay nanoparticles with collagen fibers is an important fundamental issue for the conversion of collagen to leather matrix. In this study, we have investigated the diffusion and binding of Laponite into the collagen fiber network. Our results indicate that the diffusion behaviors of Laponite into the collagen exhibit the Langmuir adsorption, verifying its affinity for collagen. The introduction of Laponite leads to a shift in the isoelectric point of collagen from ∼6.8 to ∼4.5, indicating the ionic bonding between the positively charged amino groups of the collagen and negatively charged Laponite under the tanning conditions. Fluorescence microscopy, atomic force microscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and wide-angle X-ray diffraction analyses reveal that Laponite nanoparticles can penetrate into collagen microstructure and evenly distributed onto collagen fibrils, not altering native D-periodic banding patterns of collagen fibrils. Attenuated total reflectance-Fourier transform infrared and Raman spectroscopy detections further demonstrate the presence of noncovalent interactions, namely, ionic and hydrogen bonding, between Laponite and collagen. These findings provide a theoretical basis for the use of Laponite as an emerging tanning agent in leather manufacture.

Assessment of airborne heavy metal pollution in soil and lichen in the Meric-Ergene Basin, Turkey.

PubMed

Hanedar, Asude

2015-01-01

In the present study, accumulations of airborne heavy metals in lichen and soil samples were determined on the basis of pollutant source groups by conducting Zinc (Zn), Lead (Pb), Iron (Fe), Copper (Cu), Chromium (Cr), Cadmium (Cd), Arsenic (As), Cobalt (Co) and Manganese (Mn) analyses on a total of 48 samples collected in the periods of May 2014 and August 2014 from 12 sampling points in a heavily industrialized area, a mixed industrial and residential area, an agricultural area and a background area in the Meric-Ergene Basin, and pH and total organic carbon determination was carried out on soil samples. With the obtained data, heavy metal levels were statistically assessed in detail by being associated with each other and with their probable sources; the accumulations found in soil and lichen samples were compared and spatial variances were set forth. Based on the results, it was observed that heavy metal pollution is at high levels particularly in industrialized areas, and that the differences between the cleanest and most polluted levels determined from soil samples for As, Cr, Cd and Pb reach 10 folds. The highest levels of all heavy metals were determined in both the soil and lichen samples collected from the areas in the south-east part of the region, where industrial activities and particularly leather and chemical industries are concentrated. With the comparison of the indication properties of soil and lichen, it was determined that significant and comparable results can be observed in both matrices.

North Korea’s Second Nuclear Test: Implications of U.N. Security Council Resolution 1874

DTIC Science & Technology

2010-04-15

butter” (or in North Korea’s case, rice ) and, in the process, creating a humanitarian disaster. The additional sanctions in U.N. Resolution 1874 target...the May 2009 North Korean nuclear test. See also CRS Report RL34327, Proliferation Security Initiative (PSI), by Mary Beth Nikitin. 72 “Nuclear Black ...Beverages 5,137,988 5,084,449 6,652,041 33 Perfumery, Cosmetic Products 1,322,454 1,672,327 1,688,481 42 Leather Art; Saddlery, Etc. 772,645 1,441,805

Application and utilization of a space chamber for the drying and decontamination of books, documents and other materials

NASA Technical Reports Server (NTRS)

Koesterer, M. G.; Geating, J. A.

1975-01-01

Truckloads of materials such as rare books, papers, engineering drawings, blue prints, art work, leather objects such as shoes, and clothing were successfully dried, decontaminated and impregnated against future infestation by microorganisms in a large 12 x 24 foot vacuum chamber designed originally for testing unmanned spacecraft. The process is unique in that it allows either frozen or wet material, soaked by some castastrophic event to be dried and sterilized in the same chamber with a minimum of handling and transportation.

Occupational exposures and colorectal cancers: A quantitative overview of epidemiological evidence

PubMed Central

Oddone, Enrico; Modonesi, Carlo; Gatta, Gemma

2014-01-01

A traditional belief widespread across the biomedical community was that dietary habits and genetic predisposition were the basic factors causing colorectal cancer. In more recent times, however, a growing evidence has shown that other determinants can be very important in increasing (or reducing) incidence of this malignancy. The hypothesis that environmental and occupational risk factors are associated with colorectal cancer is gaining ground, and high risks of colorectal cancer have been reported among workers in some industrial branches. The aim of this study was to investigate the epidemiologic relationship between colorectal cancer and occupational exposures to several industrial activities, by means of a scientific literature review and meta-analysis. This work pointed out increased risks of colorectal cancer for labourers occupied in industries with a wide use of chemical compounds, such as leather (RR = 1.70, 95%CI: 1.24-2.34), basic metals (RR = 1.32, 95%CI: 1.07-1.65), plastic and rubber manufacturing (RR = 1.30, 95%CI: 0.98-1.71 and RR = 1.27, 95%CI: 0.92-1.76, respectively), besides workers in the sector of repair and installation of machinery exposed to asbestos (RR = 1.40, 95%CI: 1.07-1.84). Based on our results, the estimated crude excess risk fraction attributable to occupational exposure ranged from about 11% to about 15%. However, homogeneous pattern of association between colorectal cancer and industrial branches did not emerge from this review. PMID:25253943

Studies on detection and analysis of proteases in leaf extract of medicinally important plants.

PubMed

Chinnadurai, Gandhi Shree; Krishnan, Sivakumar; Perumal, Palani

2018-02-01

The whole plant or the extracts obtained from them have long been used as medicine to treat various human diseases and disorders. Notably, those plants endowed with protease activity have been traditionally used as the agents for treating tumors, digestion disorders, swelling, blood coagulation, fibrinolysis and also for immune-modulation. Proteases occupy a pivotal position in enzyme based industries. Plant proteases have been increasingly exploited for pharmaceutical, food, leather and textile processing industries. Earlier investigations have focused on the occurrence of proteases in medicinally unimportant plants. Therefore it has been aimed to study the occurrence of proteolytic enzymes from medicinally important plants establish any correlation exists between protease activity and medicinal use of individual plants. Crude extract were obtained from the leaves of 80 different medicinal plants. Tris-HCl buffer was used as the extraction buffer and the supernatants obtained were used for determination of total protein and protease activity using spectrophotometric methods. Qualitative screening for the presence of protease was carried out with agar diffusion method by incorporating the substrate. SDS-PAGE was used to analyse the isoforms of protease and for determination of relative molecular mass. Relatively higher protease activities were observed in the extracts of leaves of Pongamia pinnata (Fabaceae), Wrightia tinctoria (Apocyanaceae) Acalypha indica (Euphorbiaceae), Adhatoda vasica (Acanthaceae) and Curcuma longa (Zingiberaceae). No correlation was found between the total protein content and protease activity in individual plant species. SDS-PAGE analysis indicated the presence of multiple forms of protease of higher molecular weight range in several plant species. We found a strong correlation between the protease activity and medicinal application of the plant CONCLUSION: The present study has unequivocally revealed that the leaves of medicinal plants could serve as excellent sources of proteases which could be exploited for various industrial, food and pharmaceutical applications. Copyright © 2018 Elsevier GmbH. All rights reserved.

Application of H2O and UV/H2O2 processes for enhancing the biodegradability of reactive black 5 dye.

PubMed

Kalpana, S Divya; Kalyanaraman, Chitra; Gandhi, N Nagendra

2011-07-01

Leather processing is a traditional activity in India during which many organic and inorganic chemicals are added while part of it is absorbed by the leather, the remaining chemicals are discharged along with the effluent. The effluent contains both easily biodegradable and not easily biodegradable synthetic organics like dyes, syntans. Easily biodegradable organics are removed in the existing biological treatment units whereas synthetic organics present in the wastewater are mostly adsorbed over the microbes. As the tannery effluent contains complex chemicals, it is difficult to ascertain the degradation of specific pollutants. To determine the increase in the biodegradability, one of the complex and synthetic organic chemical like dye used in the tanning operation was selected for Advanced Oxidation Process (AOPs) treatment for cleaving complex organics and its subsequent treatment in aerobic process. In the present study, Reactive Black 5 Dye used in the tanning operation was selected for Hydrogen Peroxide (H2O2) and UV/H2O2 pre-treatment for different operating conditions like pH, contact time and different volume of H2O2. A comparison was made between the untreated, Hydrogen Peroxide (H2O2) and UV/H2O2 treated effluent in order to ascertain the influence of AOP on the improvement of biodegradability of effluent. An increase in the BOD5/COD ratio from 0.21 to 0.435 was achieved in the UV/H2O2 pre-treatment process. This pre-treated effluent was further subjected to aerobic process. Biochemical Oxygen Demand (BOD5) and Chemical Oxygen Demand (COD) removal efficiency of the UV/H2O2 pre-treated dye solution in the aerobic process was found to be 86.39% and 77.82% when compared to 52.43% of BOD5 and 51.55% of COD removal efficiency without any pre-treatment. Hence from these results, to increase the biodegradability of Reactive Black 5 dye pre-treatment methods like H2O2 and UV/H2O2 can be used prior to biological treatment process.

Chromium fractionation and speciation in natural waters.

PubMed

Pereira, Catarinie Diniz; Techy, João Gabriel; Ganzarolli, Edgard Moreira; Quináia, Sueli Pércio

2012-05-01

It is common for leather industries to dump chromium-contaminated effluent into rivers and other bodies of water. Thus, it is crucial to know the impacts caused by this practice to the environment. A study on chromium partitioning and speciation, with determination at trace levels, was carried out in a potentially contaminated creek. Chromium fractionation and speciation was performed using a flow-injection preconcentration system and detection by flame atomic absorption spectrometry. High levels of this element were found in the particulate material (449-9320 mg kg(-1)), which indicates its compatibility with this fraction. The concentration of Cr(iii) in the water samples collected ranged from 5.2-105.2 μg L(-1). Cr(vi) was always below of the DL (0.3 μg L(-1)). Chromium accumulation observed in the sediment (873-1691 mg kg(-1)) may confirm contamination due to the long term release of contaminated effluents in the creek.

Detergent-compatible proteases: microbial production, properties, and stain removal analysis.

PubMed

Niyonzima, Francois Niyongabo; More, Sunil

2015-01-01

Proteases are one of the most important commercial enzymes used in various industrial domains such as detergent and leather industries. The alkaline proteases as well as other detergent-compatible enzymes such as lipases and amylases serve now as the key components in detergent formulations. They break down various stains during fabric washing. The search for detergent-compatible proteases with better properties is a continuous exercise. The current trend is to use detergent-compatible proteases that are stable over a wide temperature range. Although the proteases showing stability at elevated pH have the capacity to be used in detergent formulations, their usage can be significant if they are also stable and compatible with detergent and detergent ingredients, and also able to remove protein stains. Despite the existence of some reviews on alkaline proteases, there is no specification for the use of alkaline proteases as detergent additives. The present review describes the detergent-compatible proteases tested as detergent additives. An overview was provided for screening, optimization, purification, and properties of detergent compatible proteases, with an emphasis on the stability and compatibility of the alkaline proteases with the detergent and detergent compounds, as well as stain removal examination methods.

[Animal experimentation, animal welfare and scientific research].

PubMed

Tal, H

2013-10-01

Hundreds of thousands of laboratory animals are being used every year for scientific experiments held in Israel, mostly mice, rats, rabbits, guinea pigs, and a few sheep, cattle, pigs, cats, dogs, and even a few dozen monkeys. In addition to the animals sacrificed to promote scientific research, millions of animals slain every year for other purposes such as meat and fine leather fashion industries. While opening a front against all is an impossible and perhaps an unjustified task, the state of Israel enacted the Animal Welfare (Animal Experimentation) Law (1994). The law aims to regulate scientific animal experiments and to find the appropriate balance between the need to continue to perform animal experiments for the advancement of research and medicine, and at the same time to avoid unnecessary trials and minimize animal suffering. Among other issues the law deals with the phylogenetic scale according to which experimental animals should be selected, experiments for teaching and practicing, and experiments for the cosmetic industry. This article discusses bioethics considerations in animal experiments as well as the criticism on the scientific validity of such experiments. It further deals with the vitality of animal studies and the moral and legal obligation to prevent suffering from laboratory animals.

Probing the Crucial Role of Leu31 and Thr33 of the Bacillus pumilus CBS Alkaline Protease in Substrate Recognition and Enzymatic Depilation of Animal Hide

PubMed Central

Zaraî Jaouadi, Nadia; Jaouadi, Bassem; Ben Hlima, Hajer; Rekik, Hatem; Belhoul, Mouna; Hmidi, Maher; Aicha, Houda Slimene Ben; Hila, Chiraz Gorgi; Toumi, Abdessatar; Aghajari, Nushin; Bejar, Samir

2014-01-01

The sapB gene, encoding Bacillus pumilus CBS protease, and seven mutated genes (sapB-L31I, sapB-T33S, sapB-N99Y, sapB-L31I/T33S, sapB-L31I/N99Y, sapB-T33S/N99Y, and sapB-L31I/T33S/N99Y) were overexpressed in protease-deficient Bacillus subtilis DB430 and purified to homogeneity. SAPB-N99Y and rSAPB displayed the highest levels of keratinolytic activity, hydrolysis efficiency, and enzymatic depilation. Interestingly, and at the semi-industrial scale, rSAPB efficiently removed the hair of goat hides within a short time interval of 8 h, thus offering a promising opportunity for the attainment of a lime and sulphide-free depilation process. The efficacy of the process was supported by submitting depilated pelts and dyed crusts to scanning electron microscopic analysis, and the results showed well opened fibre bundles and no apparent damage to the collagen layer. The findings also revealed better physico-chemical properties and less effluent loads, which further confirmed the potential candidacy of the rSAPB enzyme for application in the leather industry to attain an ecofriendly process of animal hide depilation. More interestingly, the findings on the substrate specificity and kinetic properties of the enzyme using the synthetic peptide para-nitroanilide revealed strong preferences for an aliphatic amino-acid (valine) at position P1 for keratinases and an aromatic amino-acid (phenylalanine) at positions P1/P4 for subtilisins. Molecular modeling suggested the potential involvement of a Leu31 residue in a network of hydrophobic interactions, which could have shaped the S4 substrate binding site. The latter could be enlarged by mutating L31I, fitting more easily in position P4 than a phenylalanine residue. The molecular modeling of SAPB-T33S showed a potential S2 subside widening by a T33S mutation, thus suggesting its importance in substrate specificity. PMID:25264614

Improvement of technical purpose materials performance characteristics with the radio frequency low pressure plasma

NASA Astrophysics Data System (ADS)

Makhotkina, L. Yu; Khristoliubova, V. I.

2017-11-01

The main aim of the work is to solve the actual problem of increasing the competitiveness of tanning products by reducing the prime cost and improving the quality of finished products due to the increased durability of the working elements of tanneries. The impact of the low pressure radio frequency (RF) plasma in the processes of treating for modification of the materials for special purposes is considered in the article. The results of working elements of tanneries and the materials for special purposes sample processing by a RF low pressure plasma are described. As a result of leather materials nano structuring and nano modifying physical, mechanical and hygienic characteristics were increased. Processing of the technical purpose materials allows to increase operational performance of products and extend their lifespan.

[Characterization of cases contravening of regulations regarding primary aromatic amines originating from azo dyes in commercial textile products and leather products in European Union].

PubMed

Kawakami, Tsuyoshi; Isama, Kazuo; Ikarashi, Yoshiaki

2013-01-01

Contraventions of regulations regarding primary aromatic amines (PAAs) originating from azo dyes in commercial textile products and leather products in European Union (EU), notified in the period between 2006 and 2012 were collected from the Rapid Alert System for non-food consumer products (RAPEX), were characterized. Various types of products (clothes, footwear, bedding, etc.) and their raw materials (cotton, silk, viscose, leather, etc.) were reported to have contravened the regulations. The contravention frequencies for products made in China and India were higher than those for other countries. Ten percentage of the country in which the reported products were produced was unknown. The notification frequencies for benzidine and 4-aminoazobenzene were higher than those for other PAAs. Contravention of regulations regarding benzidine, 4-aminoazobenzene, and 3,3'-dimethoxybenzidine were notified every year. Contraventions of regulations regarding five PAAs--classified as IARC group 1--were notified one or several times. Since the scale of the survey conducted in Japan were small compared with RAPEX, it is necessary that many kinds and number of products should be surveyed in Japan. In addition, it is also necessary to pay attention to 4-aminoazobenzene, while it has not been detected in the previous studies conducted in Japan.

The prevalence of chromium allergy in Denmark is currently increasing as a result of leather exposure.

PubMed

Thyssen, J P; Jensen, P; Carlsen, B C; Engkilde, K; Menné, T; Johansen, J D

2009-12-01

Chromium allergy has traditionally been caused by occupational skin contact with cement. In 1983, Danish legislation made the addition of ferrous sulphate compulsory in cement to reduce the water-soluble chromium content to not more than 2 ppm. An effect from this intervention has previously been demonstrated among Danish construction workers. To investigate the development of chromium allergy among patients with dermatitis tested between 1985 and 2007 in Denmark. Furthermore, to determine causative exposures in patients with chromium allergy. A retrospective analysis of patch test data was performed (n = 16,228) and charts from patients with chromium allergy were reviewed. Comparisons were made using a chi(2) test. Logistic regression analyses were used to test for associations. The prevalence of chromium allergy decreased significantly from 3.6% in 1985 to 1% in 1995 (P(trend) < 0.001) but increased to 3.3% in 2007 (P(trend) < 0.001). The frequency of clinically relevant cement exposure decreased significantly among patients with chromium allergy from 12.7% in 1989-1994 to 3.0% (P < 0.01) in 1995-2007, whereas the frequency of relevant leather exposure increased significantly from 24.1% during 1989-1994 to 45.5% during 1995-2007 (P < 0.02). Chromium allergy is currently increasing in Denmark due to leather exposure.

Development of municipal solid waste classification in Korea based on fossil carbon fraction.

PubMed

Lee, Jeongwoo; Kang, Seongmin; Kim, Seungjin; Kim, Ki-Hyun; Jeon, Eui-Chan

2015-10-01

Environmental problems and climate change arising from waste incineration are taken quite seriously in the world. In Korea, the waste disposal methods are largely classified into landfill, incineration, recycling, etc. and the amount of incinerated waste has risen by 24.5% from 2002. In the analysis of CO₂emissions estimations of waste incinerators fossil carbon content are main factor by the IPCC. FCF differs depending on the characteristics of waste in each country, and a wide range of default values are proposed by the IPCC. This study conducted research on the existing classifications of the IPCC and Korean waste classification systems based on FCF for accurate greenhouse gas emissions estimation of waste incineration. The characteristics possible for sorting were classified according to FCF and form. The characteristics sorted according to fossil carbon fraction were paper, textiles, rubber, and leather. Paper was classified into pure paper and processed paper; textiles were classified into cotton and synthetic fibers; and rubber and leather were classified into artificial and natural. The analysis of FCF was implemented by collecting representative samples from each classification group, by applying the 14C method, and using AMS equipment. And the analysis values were compared with the default values proposed by the IPCC. In this study of garden and park waste and plastics, the differences were within the range of the IPCC default values or the differences were negligible. However, coated paper, synthetic textiles, natural rubber, synthetic rubber, artificial leather, and other wastes showed differences of over 10% in FCF content. IPCC is comprised of largely 9 types of qualitative classifications, in emissions estimation a great difference can occur from the combined characteristics according with the existing IPCC classification system by using the minutely classified waste characteristics as in this study. Fossil carbon fraction (FCF) differs depending on the characteristics of waste in each country; and a wide range of default values are proposed by the IPCC. This study conducted research on the existing classifications of the IPCC and Korean waste classification systems based on FCF for accurate greenhouse gas emissions estimation of waste incineration.

Carbon fibre reinforced plastic knee-ankle-foot orthosis with a partially flexible thigh cuff: a modification for comfort while sitting on a toilet seat.

PubMed

Hachisuka, K; Arai, K; Arai, M

2007-06-01

At the request of a polio survivor, a partially flexible thigh cuff made of leather and canvas for a carbon KAFO was devised to allow the wearer to feel more comfortable while sitting on a toilet seat. The original, acrylic resin, thigh cuff was partially excised to make an opening (15x10 cm), which was stuffed with rubber sponge, and was sealed with leather and canvas. The opening's surround was vertically and horizontally reinforced with carbon fibres. This modification provided relief to the polio survivor from the discomfort previously experienced while sitting on a toilet seat, and satisfied her needs in daily life.

Determination of organochlorine pesticides in skins and leather by gas chromatography.

PubMed

Font, J; Marsal, A

1998-06-19

The simultaneous determination of residues of lindane (gamma-HCH) and 10 other organochlorine pesticides (OCPs) in skins and leather was carried out by gas chromatography (GC) with electron-capture detection (ECD). GC with mass spectrometric detection was used to identity confirmation. Samples were extracted with hexane. The extracts were concentrated, and cleaned up on a Florisil column. Dibromooctafluorobiphenyl was added as internal standard. Hide fortifications of 0.5 an d5.0 ppm yielded average lindane recoveries of 98% and 96%, respectively. OCPs was determined in 57 samples of skins purchased from American, European and African countries in 1996-1997. OCPs were not detected in any of the American and European samples. Residues of lindane were found in 56% of African samples.

[Prospectic evaluation of the Italian Workers' Compensation Authority in a large case series of Occupational sino-nasal cancers].

PubMed

Casà, M; Bonzini, M; Parassoni, D; Tavecchio, D; Facchinetti, N; Castelnuovo, P; Ferrario, M M

2012-01-01

Sino-nasal cancer (SNC) are rare tumours with an elevated occupational etiological fraction, due both to well-established risk factors (wood and leather) and to more rare carcinogens. We evaluated the assessment for workers' compensation performed by the Italian Authority (INAL) in a case-series of occupational SNC (N = 45). We observed an elevated proportion of cases that were recognised as occupational, overall (36 on 39) and for any histotype. INAIL tended to recognize as professional not only patients with exposure to wood and leather but also cases with a documented exposure to formaldehyde, metal, polycyclic hydrocarbons. Significant differences across Italian macro-regions appeared, when the amount of worker compensation was investigated.

Association of Parkinson's disease with industry sectors: a French nationwide incidence study.

PubMed

Vlaar, Tim; Kab, Sofiane; Schwaab, Yannick; Fréry, Nadine; Elbaz, Alexis; Moisan, Frédéric

2018-05-05

In order to identify working environments at risk for Parkinson's disease (PD), we investigated the relation between the importance of industry sectors, used as a surrogate for occupational exposures, and PD incidence in French cantons. The number of incident PD cases (2010-2014) in 3689 cantons of metropolitan France was determined using drug claims from French National Health Insurance databases. The proportions of workers in 38 industry sectors in 2006 were calculated for each canton. Associations between the proportions of workers in industry sectors and PD age/sex-standardized incidence ratios were examined using incidence rate ratios (IRR) and 95% confidence intervals (CI) estimated with multilevel negative binomial regressions with a random intercept at the canton-level and adjusted for smoking, deprivation index, and density of neurologists. We then used two-step semi-Bayes hierarchical regression (HR) to include prior information about exposure to pesticides, metals, and solvents in each industry sector. We identified 112,625 incident cases. PD incidence was higher in areas characterized by high proportions of workers in "Agriculture, forestry and fishing" (IRR HR  = 1.042; CI 95% = 1.014-1.070; p-Trend HR  = 0.004), "Manufacture of textiles, wearing apparel, leather and related products" (IRR HR  = 1.024; CI 95% = 1.005-1.044; p-Trend HR  = 0.010), and "Manufacture of basic metals and fabricated metal products, except machinery and equipment" (IRR HR  = 1.024; CI 95% = 1.003-1.046; p-Trend HR  = 0.071). This nationwide study, based on a comprehensive analysis of industry sectors, shows significant associations between high proportions of workers in specific industry sectors (agriculture, metallurgy, textile) and PD incidence that may be targeted in further epidemiological studies to replicate and better understand these associations.

Research on the degradation mechanism of pyridine in drinking water by dielectric barrier discharge.

PubMed

Li, Yang; Yi, Rongjie; Yi, Chengwu; Zhou, Biyun; Wang, Huijuan

2017-03-01

Pyridine, an important chemical raw material, is widely used in industry, for example in textiles, leather, printing, dyeing, etc. In this research, a dielectric barrier discharge (DBD) system was developed to remove pyridine, as a representative type of nitrogen heterocyclic compound in drinking water. First, the influence of the active species inhibitors tertiary butanol alcohol (TBA), HCO 3 - , and CO 3 2- on the degradation rate of pyridine was investigated to verify the existence of active species produced by the strong ionization discharge in the system. The intermediate and final products generated in the degradation process of pyridine were confirmed and analyzed through a series of analytical techniques, including liquid chromatography-mass spectrometry (LC-MS), high performance liquid chromatography (HPLC), ion chromatography (IC), total organic carbon (TOC) analysis, ultraviolet (UV) spectroscopy, etc. The results showed that the degradation of pyridine was mainly due to the strong oxidizing power of ozone and hydroxyl radical produced by the DBD system. Several intermediate products including 3-hydroxyl pyridine, fumaric acid, 2, 3-dihydroxypyridine, and oxalic acid were detected. Nitrogen was removed from the pyridine molecule to form nitrate. Through analysis of the degradation mechanism of pyridine, the oxidation pathway was deduced. The study provided a theoretical and experimental basis for the application of DBD strong ionization discharge in treatment of nitrogen heterocyclic compounds in drinking water. Copyright © 2016. Published by Elsevier B.V.

Mass Customization and Personalization Prospects in Developing Country: Indonesian Context

NASA Astrophysics Data System (ADS)

Risdiyono; Djati Widodo, Imam; Mahtarami, Affan

2016-01-01

The advancement of information technology (IT) has changed many modes and ways for people in doing their businesses. Mass Customization and Personalization (MCP) is one example of business modes that has been dramatically evolve, mainly due to the currently very fast IT development. MCP has enabled people to involve in adjusting some design parameters of a product to meet their personal requirements before purchased. The advancement of IT has made MCP more successful as it makes the process faster, easier, simpler and more joyful. The success stories of MCP are easily found in many developed countries, where the IT infrastructure has firmly been established. For developing countries, there are very few industries have implemented the MCP concept, including Indonesia. This paper discusses a descriptive study to depict what people think about MCP implementation in Indonesia especially in Small and Medium Enterprises (SMEs). Kano model was used to see the perception of both producers and consumers in relation with MCP implementation. Five dummy MCP prototypes were developed for five creative products including plaques, hats, invitation card, t-shirts and leather bags. Based on the KANO questionnaire analyses, it is clear that there are big opportunities to implement MCP in Indonesia especially for creative products produced by SMEs. Identifying the correct product features is an important key for successful MCP implementation in developing countries.

Gelatin as a new humidity sensing material: Characterization and limitations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapardanis, Steven; Hudpeth, Mathew; Kaya, Tolga, E-mail: kaya2t@cmich.edu

The goal of this work is to assert the utility of collagen and its denatured counterpart gelatin as cost-effective alternatives to existing sensing layers comprised of polymers. Rather than producing a material that will need to be discarded or recycled, collagen, as a by-product of the meat and leather industry, could be repurposed. This work examines the feasibility of using collagen as a sensing layer. Planar electrodes were patterned with lift-off process to work with the natural characteristics of gelatin by utilizing metal vapor deposition, spin coating, and photolithography. Characterization methods have also been optimized through the creation of specializedmore » humidity chambers that isolate specific characteristics such as response time, accuracy, and hysteresis. Collagen-based sensors are found to have a sensitivity to moisture in the range of 0.065 pF/%RH. Diffusion characteristics were also analyzed with the diffusion coefficient found to be 2.5 × 10{sup −5} cm{sup 2}/s. Absorption and desorption times were found to be 20 seconds and 8 seconds, respectively. Hysteresis present in the data is attributed to temperature cross-sensitivity. Ultimately, the utility of collagen as a dielectric sensing material is, in part, due to its fibrous macrostructures as well its hydrophilic sites along the peptide chains. Gelatin was patterned between and below interdigitated copper electrodes and tested as a relative humidity sensor. This work shows that gelatin, which is inexpensive, widely available, and easy to process, can be an effective dielectric sensing polymer for capacitive-type relative humidity sensors.« less

Studies of the influence of nonequilibrium plasma thermal exposure on the characteristics of the capillary-porous polymer material

NASA Astrophysics Data System (ADS)

Makhotkina, L. Yu; Khristoliubova, V. I.

2017-01-01

Capillary-porous materials, which include natural macromolecular tanning material, are exposed to a number of factors during the treatment by a nonequilibrium plasma. Plasma particles exchange the charge and energy with the atoms of the material during the interaction of the plasma with the surface. The results of treatment are desorption of atoms and molecules from the body surface, sputtering and evaporation of material’s particles, changes of the structure and phase state. In real terms during the modification of solids by nonequilibrium low-temperature plasma thermal effect influences the process. The energy supplied from the discharge during the process with low pressure, which is converted into heat, is significantly less than during the atmospheric pressure, but the thermal stability of high-molecular compounds used in the manufacture of materials and products of the tanning industry, is very limited and depends on the duration of the effect of temperature. Even short heating of hydrophilic polymers (proteins) (100-180 °C) causes a change in their properties. It decreases the collagen ability to absorb water vapor, to swell in water, acids, alkalis, and thus decreases their durability. Prolonged heating leads to a deterioration of the physical and mechanical properties. Higher heating temperatures it leads to the polymer degradation. The natural leather temperature during plasma exposure does not rise to a temperature of collagen degradation and does not result in changes of physical phase of the dermis. However, the thermal plasma exposure must be considered, since the high temperatures influence on physical and mechanical properties.

Bio-mimetic mineralization potential of collagen hydrolysate obtained from chromium tanned leather waste.

PubMed

Banerjee, Pradipta; Madhu, S; Chandra Babu, N K; Shanthi, C

2015-04-01

Hydroxyapatite (HA) ceramics serve as an alternative to autogenous-free bone grafting by virtue of their excellent biocompatibility. However, chemically synthesized HA lacks the strong load-bearing capacity as required by bone. The bio-mimetic growth of HA crystals on collagen surface provides a feasible solution for synthesizing bone substitutes with the desired properties. This study deals with the utilization of the collagen hydrolysate recovered from leather waste as a substrate for promoting HA crystal growth. Bio-mimetic growth of HA was induced by subjecting the hydrolysate to various mineralization conditions. Parameters that would have a direct effect on crystal growth were varied to determine the optimal conditions necessary. Maximum mineralization was achieved with a combination of 10mM of CaCl2, 5mM of Na2HPO4, 100mM of NaCl and 0.575% glutaraldehyde at a pH of 7.4. The metal-protein interactions leading to formation of HA were identified through Fourier-transform infrared (FTIR) spectroscopy and x-ray diffraction (XRD) studies. The crystal dimensions were determined to be in the nanoscale range by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The size and crystallinity of bio-mimetically grown HA indicate that hydrolysate from leather waste can be used as an ideal alternative substrate for bone growth. Copyright © 2015 Elsevier B.V. All rights reserved.

Gold nanoparticles mediated coloring of fabrics and leather for antibacterial activity.

PubMed

Velmurugan, Palanivel; Shim, Jaehong; Bang, Keuk-Soo; Oh, Byung-Taek

2016-07-01

Metal gold nanoparticles (AuNPs) were synthesized in situ onto leather, silk and cotton fabrics by three different modules, including green, chemical, and a composite of green and chemical synthesis. Green synthesis was employed using Ginkgo biloba Linn leaf powder extract and HAuCl4 with the fabrics, and chemical synthesis was done with KBH4 and HAuCl4. For composite synthesis, G. biloba extract and KBH4 were used to color and embed AuNPs in the fabrics. The colored fabrics were tested for color coordination and fastness properties. To validate the green synthesis of AuNPs, various instrumental techniques were used including UV-Vis spectrophotometry, HR-TEM, FTIR, and XRD. The chemical and composite methods reduce Au(+) onto leather, silk and cotton fabrics upon heating, and alkaline conditions are required for bonding to fibers; these conditions are not used in the green synthesis protocol. FE-SEM image revealed the binding nature of the AuNPs to the fabrics. The AuNPs that were synthesized in situ on the fabrics were tested against a skin pathogen, Brevibacterium linens using LIVE/DEAD BacLight Bacterial Viability testing. This study represents an initial route for coloring and bio-functionalization of various fabrics with green technologies, and, accordingly, should open new avenues for innovation in the textile and garment sectors. Copyright © 2016 Elsevier B.V. All rights reserved.

16 CFR § 1302.5 - Findings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... adhesives are used primarily for bonding plastic laminates to counter and table tops, for applying tile..., leather, linoleum, tiles, rubber and plastics. Contact adhesives may also be used in furniture...

Hazard identification and pre-map with a simple specific tool: synthesis of application experience in handicrafts in various productive sectors.

PubMed

Colombini, Daniela; Occhipinti, Enrico; Peluso, Raffaele; Montomoli, Loretta

2012-01-01

In August 2009, an international group was founded with the task of developing a "toolkit for MSD prevention" under the IEA and in collaboration with the World Health Organization.According to the ISO standard 11228 series and the new Draft ISO TR 12259 "Application document guides for the potential user", our group developed a preliminary "mapping" methodology of occupational hazards in the craft industry, supported by software (Excel®, free download on: www.epmresearch.org).The possible users of toolkits are: members of health and safety committees; health and safety representatives; line supervisors; foremen; workers; government representatives; health workers providing basic occupational health services; occupational health and safety specialists.The proposed methodology, using specific key enters and quick assessment criteria, allows a simple ergonomics hazards identification and risk estimation to be made. It is thus possible to decide for which occupational hazards a more exhaustive risk assessment will be necessary and which occupational consultant should be involved (occupational physician, safety engineer, industrial hygienist, etc.).The methodology has been applied in different situations of small and medium craftsmanship Italian enterprises: leather goods, food, technical dental work, production of artistic ceramics and stained glass, beekeeping activities. The results are synthetically reported and discussed in this paper.

[Allergy to car seat].

PubMed

Wurpts, G; Merk, H F

2010-11-01

This is a case report of a female patient showing a delayed allergic reaction to epoxy resin. The allergic contact dermatitis occurred after sitting in her new car equipped with artificial leather seats.

16 CFR 1302.5 - Findings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... laminates to counter and table tops, for applying tile board to walls, and for applying some types of flooring. Other uses include bonding metals, wood, leather, linoleum, tiles, rubber and plastics. Contact...

16 CFR 1302.5 - Findings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... laminates to counter and table tops, for applying tile board to walls, and for applying some types of flooring. Other uses include bonding metals, wood, leather, linoleum, tiles, rubber and plastics. Contact...

16 CFR 1302.5 - Findings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... laminates to counter and table tops, for applying tile board to walls, and for applying some types of flooring. Other uses include bonding metals, wood, leather, linoleum, tiles, rubber and plastics. Contact...

Extraction of natural colorant from purple sweet potato and dyeing of fabrics with silver nanoparticles for augmented antibacterial activity against skin pathogens.

PubMed

Velmurugan, Palanivel; Kim, Jae-In; Kim, Kangmin; Park, Jung-Hee; Lee, Kui-Jae; Chang, Woo-Suk; Park, Yool-Jin; Cho, Min; Oh, Byung-Taek

2017-08-01

The main objective of this study was to extract natural colorant from purple sweet potato powder (PSPP) via a water bath and ultrasound water bath using acidified ethanol (A. EtOH) as the extraction solvent. When optimizing the colorant extraction conditions of the solvents, acidified ethanol with ultrasound yielded a high extraction capacity and color intensity at pH2, temperature of 80°C, 20mL of A. EtOH, 1.5g of PSPP, time of 45min, and ultrasonic output power of 75W. Subsequently, the colorant was extracted using the optimized conditions for dyeing of textiles (leather, silk, and cotton). This natural colorant extraction technique can avoid serious environmental pollution during the extraction and is an alternative to synthetic dyes, using less solvent and simplified abstraction procedures. The extracted purple sweet potato natural colorant (PSPC) was used to dye leather, silk, and cotton fabrics in an eco-friendly approach with augmented antibacterial activity by in situ synthesis of silver nanoparticles (AgNPs) and dyeing. The optimal dyeing conditions for higher color strength (K/S) values were pH2 and 70°C for 45min. The colorimetric parameters L ∗ , a ∗ , b ∗ , C, and H were measured to determine the depth of the color. The Fourier transform infrared spectroscopy (FTIR) spectra of undyed control, dyed with PSPC and dyed with blend of PSPC and AgNPs treated leather, silk and cotton fabric were investigated to study the interaction among fiber type, nanoparticles, and dye. The structural morphology of leather and silk and cotton fabrics and the anchoring of AgNPs with elemental compositions were investigated by scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS). The dry and wet rubbing fastness for dye alone and dye with nanoparticles were grade 4-5 and 4, respectively. Thus, the results of the present study clearly suggest that in situ synthesis of AgNPs along with dyeing should be considered in the development of antimicrobial textile finishes. Copyright © 2017. Published by Elsevier B.V.

Synthesis, Surface Parameters, and Biodegradability of Water-soluble Surfactants for Various Applications.

PubMed

El-Sayed, Refat; Alotaibi, Hawazin H; Elhady, Heba A

2018-01-01

The synthesis of water-soluble heterocyclic compounds was verified on the basis of nonionic surfactants for use as surface-active agents. Surface characteristics such as surface and interfacial tensions, cloud point, wetting time, emulsion stability, foaming height and foaming stability were measured for these surface factors in aqueous solutions. In addition, the critical micelle concentration (CMC), the surface pressure at CMC (π cmc ), the effectiveness of surface tension reduction (pC 20 ), the maximum surface concentration (Γ ma. ) and the minimum area/molecule at the aqueous solution/air interface (A min ) were calculated. Moreover, the biodegradability for these nonionic surfactants has been investigated. Furthermore, the antimicrobial evaluation has been evaluated with some surfactants that have demonstrated a potent cytotoxicity as antibacterial, antifungal and anticancer. These surfactants have a good water solubility, low toxicity, environmentally friendly environment, high foam, good emulsifier and easy production that will be used them in various fields such as medical drugs, insecticides, detergents, emulsifiers, cosmetics, inks clothing, leather industry and oil recovery.

Hide depilation and feather disintegration studies with keratinolytic serine protease from a novel Bacillus subtilis isolate.

PubMed

Pillai, Priya; Archana, G

2008-03-01

Keratinases play an important role in biotechnological applications such as improvement of feather meal, enzymatic dehairing and production of amino acids or peptides from high molecular weight substrates. Bacillus subtilis P13, isolated from Vajreshwari hot spring (45-50 degrees C) near Mumbai, India, produces a neutral serine protease and has an optimum temperature of 65 degrees C. This enzyme preparation was keratinolytic in nature and could disintegrate whole chicken feathers, except for the remnants of shafts. The enzyme preparation also exhibited depilation of goat hides with the recovery of intact animal hair. The enzyme preparation could release peptides from ground feathers and bring about their weight reduction; however, similar action on hair was relatively weak. A single major PMSF-sensitive protease band could be detected upon zymogram analysis, indicating that a single enzyme may be responsible for feather degradation and hide depilation. The importance of these findings in the biotechnological application for feather and leather industries is discussed.

Yacare caiman (Caiman yacare) trim hamburger and sausage subjected to different smoking techniques.

PubMed

Fernandes, Vitória Regina Takeuchi; Souza Franco, Maria Luiza Rodrigues; Mikcha, Jane Martha Graton; de Souza, Vera Lúcia Ferreira; Gasparino, Eliane; Coutinho, Marcos Eduardo; Tanamati, Augusto; Del Vesco, Ana Paula

2014-02-01

Caiman, as well as having skin that, after tanning, produces leather of high added value, exceptional quality and good market value, also possesses a meat with a remarkably smooth taste and appearance. This study aimed to characterize hamburger and sausages made from Yacare caiman (Caiman yacare) meat trim. Hot smoked products contained less moisture than the unsmoked products. Protein and ash were higher, respectively, for hot smoked hamburger and sausage. Lipids had greater presence in hot smoked sausage (9.72%), whereas in the burgers they were higher in the liquid smoked burgers (6.71%). The hot smoked products had lower water activity. Hot smoked products displayed less luminance, but the a* and b* chroma were higher in smoked hamburgers. Taste, texture and general acceptability were significant for the hamburger, whereas for the sausage there was a significant effect for texture, salt and purchase intent. For all the products, the hot smoking resulted in the lowest acceptability. © 2013 Society of Chemical Industry.

[Sinonasal carcinoma and exposure to wood and leather dust: analysis of 36 cases].

PubMed

Bracci, M; Mariotti, L; Staffolani, S; Strafella, E; Carlucci, C; Pasquini, E; Tarchini, P; Re, M; Santarelli, L

2012-01-01

In order to define the best strategies of prevention and diagnosis of sinonasal cancer, the aim of our study was the investigation of the etiological and prognostic factors related to 36 cases. The enrolled cases were composed mostly of men working in the footwear industry, with a mean age of 63.7 years and mean exposure of 34.6 years. The period between the start of exposure and the appearance of the neoplasm was of 44.6 years, the time between the onset of symptoms and diagnosis was of 10.8 months. Our results suggest that a diagnosis within 6 months after the onset of symptoms is associated with a lower tumor stage, a better survival and to a lower rate of recurrence. Nasal obstruction (58.3%) and epistaxis (52.7%) are the main initial symptoms. In order to obtain an early diagnosis, in addition to periodic clinical controls, a proper information of workers is required.

Metabolism and biotransformation of azo dye by bacterial consortium studied in a bioreaction calorimeter.

PubMed

Shanmugam, Bhuvanesh Kumar; Mahadevan, Surianarayanan

2015-11-01

Effluents from leather and textile industries are difficult for treatment owing to its recalcitrant nature. Since the volume of effluent generated are high, a robust and active microbial consortia is required for effective treatment. The focus in the present study is the calorimetric traceability of the metabolic behaviors of mixed microbial consortia, while it grows and degrades recalcitrant substance such as an azo dye acid blue 113. The consortium exhibited a syntrophic division of substrate and was effective in degrading dye up to 0.8g/l. Notably, it was able to degrade 93.7% of the azo dye in 12-16h whereas its monocultures required 48-72h to reach 82.1%. The products of biodegradation were analyzed and the chemical pathway substantiated using chemical thermodynamic and energy release patterns. MTT assay confirmed that emanates are eco-friendly. Heat profile pattern and bioenergetics provide fundamental data for a feasible application in commercial level. Copyright © 2015 Elsevier Ltd. All rights reserved.

Response surface modeling for optimization heterocatalytic Fenton oxidation of persistence organic pollution in high total dissolved solid containing wastewater.

PubMed

Sekaran, G; Karthikeyan, S; Boopathy, R; Maharaja, P; Gupta, V K; Anandan, C

2014-01-01

The rice-husk-based mesoporous activated carbon (MAC) used in this study was precarbonized and activated using phosphoric acid. N2 adsorption/desorption isotherm, X-ray powder diffraction, electron spin resonance, X-ray photoelectron spectroscopy and scanning electron microscopy, transmission electron microscopy, (29)Si-NMR spectroscopy, and diffuse reflectance spectroscopy were used to characterize the MAC. The tannery wastewater carrying high total dissolved solids (TDS) discharged from leather industry lacks biodegradability despite the presence of dissolved protein. This paper demonstrates the application of free electron-rich MAC as heterogeneous catalyst along with Fenton reagent for the oxidation of persistence organic compounds in high TDS wastewater. The heterogeneous Fenton oxidation of the pretreated wastewater at optimum pH (3.5), H2O2 (4 mmol/L), FeSO4[Symbol: see text]7H2O (0.2 mmol/L), and time (4 h) removed chemical oxygen demand, biochemical oxygen demand, total organic carbon and dissolved protein by 86, 91, 83, and 90%, respectively.

Characterization of thermostable alkaline proteases from Bacillus infantis SKS1 isolated from garden soil.

PubMed

Saggu, Sandeep Kaur; Mishra, Prakash Chandra

2017-01-01

Proteases are one of the largest groups of hydrolytic enzymes constituting about 60% of total worldwide sales of industrial enzymes due to their wide applications in detergent, leather, textile, food and pharmaceutical industry. Microbial proteases have been preferred over animal and plant proteases because of their fundamental features and ease in production. Bacillus infantis SKS1, an alkaline protease producing bacteria has been isolated from garden soil of north India and identified using morphological, biochemical and molecular methods. 16S rDNA sequence amplified using universal primers has 99% sequence identity with corresponding gene sequence of Bacillus infantis strain FM 34 and Bacillus sp. Beige. The bacterial culture and its 16S rDNA gene sequence have been deposited to Microbial Culture Collection (Pune, India) with accession number MCC 3035 and GenBank with accession number KR092197 respectively. The partially purified extract of Bacillus infantis SKS1 was thermostable and active in presence of Mg2+, acetyl acetone and laundry detergents implicating its application in industry. Production of these enzymes using this strain was maximized by optimization of various parameters including temperature, pH, media components and other growth conditions. Our results show that fructose and dextrose serve as the best carbon sources for production of these enzymes, highlighting the use of this strain for enzyme production utilizing relatively inexpensive substrates like beet molasses and corn steep liquor. Additionally, this strain showed maximum production of enzymes at 40°C similar to bacterial species used for commercial production of alkaline proteases. Characterization of alkaline proteases from this strain of Bacillus infantis and optimization of parameters for its production would help in understanding its industrial application and large-scale production.

Characterization of thermostable alkaline proteases from Bacillus infantis SKS1 isolated from garden soil

PubMed Central

Saggu, Sandeep Kaur

2017-01-01

Proteases are one of the largest groups of hydrolytic enzymes constituting about 60% of total worldwide sales of industrial enzymes due to their wide applications in detergent, leather, textile, food and pharmaceutical industry. Microbial proteases have been preferred over animal and plant proteases because of their fundamental features and ease in production. Bacillus infantis SKS1, an alkaline protease producing bacteria has been isolated from garden soil of north India and identified using morphological, biochemical and molecular methods. 16S rDNA sequence amplified using universal primers has 99% sequence identity with corresponding gene sequence of Bacillus infantis strain FM 34 and Bacillus sp. Beige. The bacterial culture and its 16S rDNA gene sequence have been deposited to Microbial Culture Collection (Pune, India) with accession number MCC 3035 and GenBank with accession number KR092197 respectively. The partially purified extract of Bacillus infantis SKS1 was thermostable and active in presence of Mg2+, acetyl acetone and laundry detergents implicating its application in industry. Production of these enzymes using this strain was maximized by optimization of various parameters including temperature, pH, media components and other growth conditions. Our results show that fructose and dextrose serve as the best carbon sources for production of these enzymes, highlighting the use of this strain for enzyme production utilizing relatively inexpensive substrates like beet molasses and corn steep liquor. Additionally, this strain showed maximum production of enzymes at 40°C similar to bacterial species used for commercial production of alkaline proteases. Characterization of alkaline proteases from this strain of Bacillus infantis and optimization of parameters for its production would help in understanding its industrial application and large-scale production. PMID:29190780

The impact of common metal allergens in daily devices.

PubMed

Hamann, Dathan; Hamann, Carsten R; Thyssen, Jacob P

2013-10-01

We are widely exposed to metal allergens in our daily doings. As exposures constantly changes because of fashion trends and technological developments, there is a need for a continuous update of patch testers. An overview of consumer metal exposure studies that have been published in 2012 and 2013 is provided as well as lists of common metal exposures. Nickel release in concentrations that cause nickel allergy and contact dermatitis is seen from laptop computers. Cobalt is found in leather as a dye and may cause chronic dermatitis. Chromium is used as a dye and for tanning in leather items and is found in nearly all shoes and released from a high proportion. New consumer items should continuously be considered and investigated for metal release when patients with positive patch test results to metal allergens are evaluated.

Biophysical evaluation of footwear for cold-weather climates.

PubMed

Santee, W R; Endrusick, T L

1988-02-01

Proper selection of footwear for cold-wet environments is important in determining individual performance and comfort. Testing only total dry insulation (It) is not a wholly adequate basis for boot selection. The present study demonstrates an effective method for evaluating the effects of surface moisture on boot insulation. This method allows a more knowledgeable selection of footwear for cold-wet climates. In this study, regional insulation values were obtained under dry conditions, then during a soak in shallow water, and finally for insulation recovery after removal from water. Results for seven boots show no advantage of presently used synthetic materials during short soak episodes. Insulated leather-synthetic boots, however, recovered to dry insulation levels more rapidly than more traditional insulated leather boots. Rubber waterproof bottoms were the most effective boot construction for retaining insulation levels during water exposure.

Reduction of Cr(VI) to Cr(III) by green rust - sulphate

NASA Astrophysics Data System (ADS)

Skovbjerg, L.; Stipp, S.

2003-04-01

Chromium is widely used in industrial processes such as leather tanning, electro-plating and as colour pigments. Unfortunately, hexavalent chromium is both toxic and very soluble so it can be a problem for groundwater resources. Given the right redox conditions, however, Cr(VI) can be reduced to trivalent chromium, which is much less soluble and is an essential trace nutrient. Fe(II), an element common in soil and sediments under anaerobic conditions, can serve as a reducing agent for Cr(VI). Green Rust (GR) is a layered Fe(II),Fe(III)-hydroxide with various anions compensating charge in the interlayers. It is very effective in reducing Cr(VI) to Cr(III). GR exists in nature and is thought to be precursor for the formation of Fe(III)-oxides and oxyhydroxides at the redox boundary. It may be that the formation of GR is a key process in the effectiveness of reactive barriers for groundwater remediation that are based on Fe(0). The purpose of this work is to investigate the mechanisms controlling Cr(VI) reduction by Green Rust, to examine the effect of Cr adsorption and incorporation on GR morphology and composition, and to define the role of parameters such as interlayer anion, initial Cr(VI) concentration and time. We are using freshly synthesised material that has not been dried to avoid structural changes that may accompany dehydration and rehydration. X-Ray Diffraction (XRD) is used to characterise mineral structural changes and Atomic Force Microscopy (AFM), to examine changes in morphology as reactions take place. By adjusting the concentration of Cr(VI), we can control the rate of surface change and we can observe the nanoscale particles directly.

75 FR 53892 - Action To Ensure Authority To Issue Permits Under the Prevention of Significant Deterioration...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-02

... NAICS \\a\\ Utilities (electric, natural gas, other 2211, 2212, 2213. systems). Manufacturing (food, beverages, 311, 312, 313, 314, 315, 316. tobacco, textiles, leather). Wood product, paper manufacturing...

1 H NMR study and multivariate data analysis of reindeer skin tanning methods.

PubMed

Zhu, Lizheng; Ilott, Andrew J; Del Federico, Eleonora; Kehlet, Cindie; Klokkernes, Torunn; Jerschow, Alexej

2017-04-01

Reindeer skin clothing has been an essential component in the lives of indigenous people of the arctic and sub-arctic regions, keeping them warm during harsh winters. However, the skin processing technology, which often conveys the history and tradition of the indigenous group, has not been well documented. In this study, NMR spectra and relaxation behaviors of reindeer skin samples treated with a variety of vegetable tannin extracts, oils and fatty substances are studied and compared. With the assistance of principal component analysis (PCA), one can recognize patterns and identify groupings of differently treated samples. These methods could be important aids in efforts to conserve museum leather artifacts with unknown treatment methods and in the analysis of reindeer skin tanning processes. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Phytochemistry, biological activities and potential of annatto in natural colorant production for industrial applications – A review

PubMed Central

Shahid-ul-Islam; Rather, Luqman J.; Mohammad, Faqeer

2015-01-01

Bixa orellana commonly known as annatto is one of the oldest known natural dye yielding plants native to Central and South America. Various parts of annatto have been widely used in the traditional medical system for prevention and treatment of a wide number of health disorders. The plethora of traditional uses has encouraged researchers to identify and isolate phytochemicals from all parts of this plant. Carotenoids, apocarotenoids, terpenes, terpenoids, sterols, and aliphatic compounds are main compounds found in all parts of this plant and are reported to exhibit a wide range of pharmacological activities. In recent years annatto has received tremendous scientific interest mainly due to the isolation of yellow–orange natural dye from its seeds which exhibits high biodegradability, low toxicity, and compatibility with the environment. Considerable research work has already been done and is currently underway for its applications in food, textile, leather, cosmetic, solar cells, and other industries. The present review provides up-to-date systematic and organized information on the traditional usage, phytochemistry and pharmacology of annatto. It also highlights its non-food industrial applications in order to bring more interest on this dye plant, identifies the existing gaps and provides potential for future studies. Studies reported in this review have demonstrated that annatto holds a great potential for being exploited as source of drugs and a potential natural dye. However, further efforts are required to identify extract biomolecules and their action mechanisms in exhibiting certain biological activities in order to understand the full phytochemical profile and the complex pharmacological effects of this plant. PMID:27222755

Publications - MP 157 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Alaska, containing the communities of Fairbanks, Fort Yukon, and Eagle, scale 1:500,000 (79.0 M) Sheet 7 ; Mineral Prospect; Mountain Leather; Tremolite; Ultramafic; geoscientificInformation Top of Page Department

Snacks for adults

MedlinePlus

... into wedges), 1 medium or ¼ cup (35 grams) Bananas, 1 medium Raisins, ¼ cup (35 grams) Fruit leather (dried fruit puree) without added sugar ... into strips, or baby carrots ), 1 cup (130 grams) Snap peas (the pods are edible), 1.5 ...

Accuracy and speed of material categorization in real-world images.

PubMed

Sharan, Lavanya; Rosenholtz, Ruth; Adelson, Edward H

2014-08-13

It is easy to visually distinguish a ceramic knife from one made of steel, a leather jacket from one made of denim, and a plush toy from one made of plastic. Most studies of material appearance have focused on the estimation of specific material properties such as albedo or surface gloss, and as a consequence, almost nothing is known about how we recognize material categories like leather or plastic. We have studied judgments of high-level material categories with a diverse set of real-world photographs, and we have shown (Sharan, 2009) that observers can categorize materials reliably and quickly. Performance on our tasks cannot be explained by simple differences in color, surface shape, or texture. Nor can the results be explained by observers merely performing shape-based object recognition. Rather, we argue that fast and accurate material categorization is a distinct, basic ability of the visual system. © 2014 ARVO.

Accuracy and speed of material categorization in real-world images

PubMed Central

Sharan, Lavanya; Rosenholtz, Ruth; Adelson, Edward H.

2014-01-01

It is easy to visually distinguish a ceramic knife from one made of steel, a leather jacket from one made of denim, and a plush toy from one made of plastic. Most studies of material appearance have focused on the estimation of specific material properties such as albedo or surface gloss, and as a consequence, almost nothing is known about how we recognize material categories like leather or plastic. We have studied judgments of high-level material categories with a diverse set of real-world photographs, and we have shown (Sharan, 2009) that observers can categorize materials reliably and quickly. Performance on our tasks cannot be explained by simple differences in color, surface shape, or texture. Nor can the results be explained by observers merely performing shape-based object recognition. Rather, we argue that fast and accurate material categorization is a distinct, basic ability of the visual system. PMID:25122216

The use of tannin from chestnut (Castanea vesca).

PubMed

Krisper, P; Tisler, V; Skubic, V; Rupnik, I; Kobal, S

1992-01-01

After mimosa and quebracho extracts, chestnut extract is the third most important vegetable tannin used for leather production. It is produced only in Europe on the northern side of the Mediterranean sea. The extract is prepared by hot water extraction of the bark and timber, followed by spray-drying of the solution. Analysis shows that there are insignificant variations in extract quality between batches, so the extract can be used with modern automated leather production systems. The extract contains approximately 75 percent active tanning substances. The primary component is castalagin, along with smaller amounts of vescalagin, castalin, and vescalin. A castalagin-based pharmaceutical product is currently in use for prevention and treatment of diarrhea in pigs and cattle that is caused by changes in diet. The beneficial effect is due to prevention of water losses through mucous membranes. The castalagin may also form chelates with iron, which influences the reabsorption of the metal in the animal digestive tract.

The evaporative drying of sludge by immersion in hot oil: Effects of oil type and temperature.

PubMed

Ohm, Tae-In; Chae, Jong-Seong; Lim, Kwang-Soo; Moon, Seung-Hyun

2010-06-15

We investigated the evaporative drying by immersion in hot oil (EDIHO) method for drying sludge. This involved heating oil to a temperature higher than that needed for moisture to be evaporated from the sludge by turbulent heat and mass transfer. We fry-dried sewage and leather plant sludge for 10 min in each of four different oils (waste engine, waste cooking, refined waste, and B-C heavy) and three different temperatures (140 degrees C, 150 degrees C, and 160 degrees C). Drying efficiency was found to be greater for higher temperatures. However, giving consideration to energy efficiency we suggest that the optimal temperature for fry-drying sludge is 150 degrees C. At 150 degrees C, the water content of sewage sludge reduced from 78.9% to between 1.5% (with waste cooking oil) and 3.8% (with waste engine oil). The reduction in water content for leather plant sludge fry-dried at 150 degrees C was from 81.6% to between 1% (with waste cooking oil) and 6.5% (with refined waste oil). The duration of the constant rate-drying period was also influenced by the type of oil used: refined waste oil>waste engine oil>B-C heavy oil>waste cooking oil. The duration at 150 degrees C with waste cooking oil was 3 min for sewage sludge and 2 min for leather plant sludge. It is likely that the drying characteristics of oil are influenced by its thermal properties, including its specific heat, and molecular weight. Copyright 2010 Elsevier B.V. All rights reserved.

Paré and prosthetics: the early history of artificial limbs.

PubMed

Thurston, Alan J

2007-12-01

There is evidence for the use of prostheses from the times of the ancient Egyptians. Prostheses were developed for function, cosmetic appearance and a psycho-spiritual sense of wholeness. Amputation was often feared more than death in some cultures. It was believed that it not only affected the amputee on earth, but also in the afterlife. The ablated limbs were buried and then disinterred and reburied at the time of the amputee's death so the amputee could be whole for eternal life. One of the earliest examples comes from the 18th dynasty of ancient Egypt in the reign of Amenhotep II in the fifteenth century bc. A mummy in the Cairo Museum has clearly had the great toe of the right foot amputated and replaced with a prosthesis manufactured from leather and wood. The first true rehabilitation aids that could be recognized as prostheses were made during the civilizations of Greece and Rome. During the Dark Ages prostheses for battle and hiding deformity were heavy, crude devices made of available materials - wood, metal and leather. Such were the materials available to Ambroise Paré who invented both upper-limb and lower-limb prostheses. His 'Le Petit Lorrain', a mechanical hand operated by catches and springs, was worn by a French Army captain in battle. Subsequent refinements in medicine, surgery and prosthetic science greatly improved amputation surgery and the function of prostheses. What began as a modified crutch with a wooden or leather cup and progressed through many metamorphoses has now developed into a highly sophisticated prosthetic limb made of space-age materials.

DEGRADATION OF FLUOROTELOMER-BASED POLYMERS

EPA Science Inventory

Perfluoroalkyl telomers are used to synthesize a variety of telomer-based polymer products (TBPPs). These TBPPs are used to impart soil- and liquid-repellent properties to a wide range of modern products including paper, textiles, leather and carpeting. Because of their remarka...

40 CFR 63.5350 - How do I distinguish between the water-resistant/specialty and nonwater-resistant leather product...

Code of Federal Regulations, 2010 CFR

2010-07-01

... by the Administrator. (1) Statistical analysis of initial water penetration data performed to support ASTM Designation D2099-00 indicates that poor quantitative precision is associated with this testing...

16 CFR 301.32 - Fur product containing material other than fur.

Code of Federal Regulations, 2010 CFR

2010-01-01

... required under this Act; as for example: 100% Wool Interlining—100% Recycled Wool Trim—Dyed Muskrat Fur... required under the Act and rules and regulations; as for example: Body—Leather Trim—Dyed Mink [26 FR 3187...

16 CFR 301.32 - Fur product containing material other than fur.

Code of Federal Regulations, 2011 CFR

2011-01-01

... required under this Act; as for example: 100% Wool Interlining—100% Recycled Wool Trim—Dyed Muskrat Fur... required under the Act and rules and regulations; as for example: Body—Leather Trim—Dyed Mink [26 FR 3187...

40 CFR 63.5430 - What records must I keep?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 63.5430 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations Notifications, Reports, and Records...

40 CFR 63.5430 - What records must I keep?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Section 63.5430 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations Notifications, Reports, and Records...