A Study for Texture Feature Extraction of High-Resolution Satellite Images Based on a Direction Measure and Gray Level Co-Occurrence Matrix Fusion Algorithm

PubMed Central

Zhang, Xin; Cui, Jintian; Wang, Weisheng; Lin, Chao

2017-01-01

To address the problem of image texture feature extraction, a direction measure statistic that is based on the directionality of image texture is constructed, and a new method of texture feature extraction, which is based on the direction measure and a gray level co-occurrence matrix (GLCM) fusion algorithm, is proposed in this paper. This method applies the GLCM to extract the texture feature value of an image and integrates the weight factor that is introduced by the direction measure to obtain the final texture feature of an image. A set of classification experiments for the high-resolution remote sensing images were performed by using support vector machine (SVM) classifier with the direction measure and gray level co-occurrence matrix fusion algorithm. Both qualitative and quantitative approaches were applied to assess the classification results. The experimental results demonstrated that texture feature extraction based on the fusion algorithm achieved a better image recognition, and the accuracy of classification based on this method has been significantly improved. PMID:28640181

Evaluation of methods for measuring particulate matter emissions from gas turbines.

PubMed

Petzold, Andreas; Marsh, Richard; Johnson, Mark; Miller, Michael; Sevcenco, Yura; Delhaye, David; Ibrahim, Amir; Williams, Paul; Bauer, Heidi; Crayford, Andrew; Bachalo, William D; Raper, David

2011-04-15

The project SAMPLE evaluated methods for measuring particle properties in the exhaust of aircraft engines with respect to the development of standardized operation procedures for particulate matter measurement in aviation industry. Filter-based off-line mass methods included gravimetry and chemical analysis of carbonaceous species by combustion methods. Online mass methods were based on light absorption measurement or used size distribution measurements obtained from an electrical mobility analyzer approach. Number concentrations were determined using different condensation particle counters (CPC). Total mass from filter-based methods balanced gravimetric mass within 8% error. Carbonaceous matter accounted for 70% of gravimetric mass while the remaining 30% were attributed to hydrated sulfate and noncarbonaceous organic matter fractions. Online methods were closely correlated over the entire range of emission levels studied in the tests. Elemental carbon from combustion methods and black carbon from optical methods deviated by maximum 5% with respect to mass for low to medium emission levels, whereas for high emission levels a systematic deviation between online methods and filter based methods was found which is attributed to sampling effects. CPC based instruments proved highly reproducible for number concentration measurements with a maximum interinstrument standard deviation of 7.5%.

Precision and accuracy of manual water-level measurements taken in the Yucca Mountain area, Nye County, Nevada, 1988-90

USGS Publications Warehouse

Boucher, M.S.

1994-01-01

Water-level measurements have been made in deep boreholes in the Yucca Mountain area, Nye County, Nevada, since 1983 in support of the U.S. Department of Energy's Yucca Mountain Project, which is an evaluation of the area to determine its suitability as a potential storage area for high-level nuclear waste. Water-level measurements were taken either manually, using various water-level measuring equipment such as steel tapes, or they were taken continuously, using automated data recorders and pressure transducers. This report presents precision range and accuracy data established for manual water-level measurements taken in the Yucca Mountain area, 1988-90. Precision and accuracy ranges were determined for all phases of the water-level measuring process, and overall accuracy ranges are presented. Precision ranges were determined for three steel tapes using a total of 462 data points. Mean precision ranges of these three tapes ranged from 0.014 foot to 0.026 foot. A mean precision range of 0.093 foot was calculated for the multiconductor cable, using 72 data points. Mean accuracy values were calculated on the basis of calibrations of the steel tapes and the multiconductor cable against a reference steel tape. The mean accuracy values of the steel tapes ranged from 0.053 foot, based on three data points to 0.078, foot based on six data points. The mean accuracy of the multiconductor cable was O. 15 foot, based on six data points. Overall accuracy of the water-level measurements was calculated by taking the square root of the sum of the squares of the individual accuracy values. Overall accuracy was calculated to be 0.36 foot for water-level measurements taken with steel tapes, without accounting for the inaccuracy of borehole deviations from vertical. An overall accuracy of 0.36 foot for measurements made with steel tapes is considered satisfactory for this project.

Validation of the Physical Activity Scale for individuals with physical disabilities.

PubMed

van den Berg-Emons, Rita J; L'Ortye, Annemiek A; Buffart, Laurien M; Nieuwenhuijsen, Channah; Nooijen, Carla F; Bergen, Michael P; Stam, Henk J; Bussmann, Johannes B

2011-06-01

To determine the criterion validity of the Physical Activity Scale for Individuals With Physical Disabilities (PASIPD) by means of daily physical activity levels measured by using a validated accelerometry-based activity monitor in a large group of persons with a physical disability. Cross-sectional. Participants' home environment. Ambulatory and nonambulatory persons with cerebral palsy, meningomyelocele, or spinal cord injury (N=124). Not applicable. Self-reported physical activity level measured by using the PASIPD, a 2-day recall questionnaire, was correlated to objectively measured physical activity level measured by using a validated accelerometry-based activity monitor. Significant Spearman correlation coefficients between the PASIPD and activity monitor outcome measures ranged from .22 to .37. The PASIPD overestimated the duration of physical activity measured by using the activity monitor (mean ± SD, 3.9±2.9 vs 1.5±0.9h/d; P<.01). Significant correlation (ρ=-.74; P<.01) was found between average number of hours of physical activity per day measured by using the 2 methods and difference in hours between methods. This indicates larger overestimation for persons with higher activity levels. The PASIPD correlated poorly with objective measurements using an accelerometry-based activity monitor in people with a physical disability. However, similar low correlations between objective and subjective activity measurements have been found in the general population. Users of the PASIPD should be cautious about overestimating physical activity levels. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

A dual-parameter tilted fiber Bragg grating-based sensor for liquid level and temperature monitoring

NASA Astrophysics Data System (ADS)

Osuch, Tomasz; Jurek, Tomasz; Markowski, Konrad; Jedrzejewski, Kazimierz

2016-09-01

In this paper, the concept and experimental characterization of tilted fiber Bragg grating (TFBG) based sensor for temperature and liquid level measurement are presented. It is shown that, when liquid level increases the peak amplitudes of cladding modes linearly decreases (in dB). In turn, changes in temperature causes a shift of the TFBG transmission spectrum, which can be accurately measured by monitoring the Bragg wavelength corresponding to the liquid level independent core mode. The main advantages of proposed sensor are simple design as well as linear responses to liquid level and temperature.

A Comparative Analysis of the Validity of US State- and County-Level Social Capital Measures and Their Associations with Population Health

ERIC Educational Resources Information Center

Lee, Chul-Joo; Kim, Daniel

2013-01-01

The goals of this study were to validate a number of available collective social capital measures at the US state and county levels, and to examine the relative extent to which these social capital measures are associated with population health outcomes. Measures of social capital at the US state level included aggregate indices based on the…

Effects of Goal Line Feedback on Level, Slope, and Stability of Performance within Curriculum-Based Measurement.

ERIC Educational Resources Information Center

Fuchs, Lynn S.; And Others

1991-01-01

Nineteen special educators implemented Curriculum-Based Measurement with a total of 36 learning-disabled math pupils in grades 2-8 to examine the effects of goal line feedback. Results indicated comparable levels and slopes of student performance across treatment conditions, although goal line feedback was associated with greater performance…

Predictive Validity of Curriculum-Based Measures for English Learners at Varying English Proficiency Levels

ERIC Educational Resources Information Center

Kim, Jennifer Sun; Vanderwood, Michael L.; Lee, Catherine Y.

2016-01-01

This study examined the predictive validity of curriculum-based measures in reading for Spanish-speaking English learners (ELs) at various levels of English proficiency. Third-grade Spanish-speaking EL students were screened during the fall using DIBELS Oral Reading Fluency (DORF) and Daze. Predictive validity was examined in relation to spring…

A method for modelling GP practice level deprivation scores using GIS

PubMed Central

Strong, Mark; Maheswaran, Ravi; Pearson, Tim; Fryers, Paul

2007-01-01

Background A measure of general practice level socioeconomic deprivation can be used to explore the association between deprivation and other practice characteristics. An area-based categorisation is commonly chosen as the basis for such a deprivation measure. Ideally a practice population-weighted area-based deprivation score would be calculated using individual level spatially referenced data. However, these data are often unavailable. One approach is to link the practice postcode to an area-based deprivation score, but this method has limitations. This study aimed to develop a Geographical Information Systems (GIS) based model that could better predict a practice population-weighted deprivation score in the absence of patient level data than simple practice postcode linkage. Results We calculated predicted practice level Index of Multiple Deprivation (IMD) 2004 deprivation scores using two methods that did not require patient level data. Firstly we linked the practice postcode to an IMD 2004 score, and secondly we used a GIS model derived using data from Rotherham, UK. We compared our two sets of predicted scores to "gold standard" practice population-weighted scores for practices in Doncaster, Havering and Warrington. Overall, the practice postcode linkage method overestimated "gold standard" IMD scores by 2.54 points (95% CI 0.94, 4.14), whereas our modelling method showed no such bias (mean difference 0.36, 95% CI -0.30, 1.02). The postcode-linked method systematically underestimated the gold standard score in less deprived areas, and overestimated it in more deprived areas. Our modelling method showed a small underestimation in scores at higher levels of deprivation in Havering, but showed no bias in Doncaster or Warrington. The postcode-linked method showed more variability when predicting scores than did the GIS modelling method. Conclusion A GIS based model can be used to predict a practice population-weighted area-based deprivation measure in the absence of patient level data. Our modelled measure generally had better agreement with the population-weighted measure than did a postcode-linked measure. Our model may also avoid an underestimation of IMD scores in less deprived areas, and overestimation of scores in more deprived areas, seen when using postcode linked scores. The proposed method may be of use to researchers who do not have access to patient level spatially referenced data. PMID:17822545

Artifacts associated with the measurement of oxidized DNA bases.

PubMed Central

Cadet, J; Douki, T; Ravanat, J L

1997-01-01

In this paper we review recent aspects of the measurement of oxidized DNA bases, currently a matter of debate. There has long been an interest in the determination of the level of oxidized bases in cellular DNA under both normal and oxidative stress conditions. In this respect, the situation is confusing because variations that may be as large as two orders of magnitude have been reported for the yield of the formation of 8-oxo-7,8-dihydroguanine (8-oxoGua) in similar DNA samples. However, recent findings clearly show that application of several assays like gas chromatography-mass spectrometry (GC-MS) and -32P--postlabeling may lead to a significant overestimation of the level of oxidized bases in cellular DNA. In particular, the silylation step, which is required to make the samples volatile for the GC-MS analysis, has been shown to induce oxidation of normal bases at the level of about one oxidized base per 10(4) normal bases. This has been found to be a general process that applies in particular to 8-oxoGua, 8-oxo-7, 8-dihydroadenine,5-hydroxycytosine, 5-(hydroxymethyl)uracil, and 5-formyluracil. Interestingly, prepurification of the oxidized bases from DNA hydrolysate prior to the derivatization reaction prevents artefactual oxidation. Under these conditions, the level of oxidized bases measured by GC-MS is similar to that obtained by HPLC associated with electrochemical detection (HPLC-EC). It should be added that the level of 8-oxo-7,8-dihydro-2;-deoxyguanosine in control cellular DNA has been found to be about fivefold lower than in earlier HPLC-EC measurements by using appropriate conditions of extraction and enzymatic digestion of DNA. Similar conclusions were reached by measuring formamidopyrimidine-DNA glycosylase sensitive sites as revealed by the single cell gel electrophoresis (comet) assay. Images Figure 1. PMID:9349826

Performance-based contracting in home-care work in The Netherlands: professionalism under pressure?

PubMed

Oomkens, Rosanne; Hoogenboom, Marcel; Knijn, Trudie

2016-07-01

Our aim was to improve the understanding of the relationships between performance-based contracting, management supportiveness and professionalism in home care. Using path analysis, this article explores the relationships between home-care workers' perceptions of management support, implementation of performance-based contracting (i.e. use of strict time registration rules and cost-efficiency measures) and autonomy and intrinsic job satisfaction. We hypothesised that: use of strict time registration rules and cost-efficiency measures relates to lower levels of autonomy and intrinsic job satisfaction (H1); there is an indirect relationship between use of strict time registration rules and use of cost-efficiency measures and intrinsic job satisfaction via autonomy (H2); higher levels of management support relate to the use of looser time registration rules and less use of cost-efficiency measures (H3); and higher levels of management support relate to higher levels of autonomy and intrinsic job satisfaction (H4). We used data from a cross-sectional survey conducted in 2010 of a sample of Dutch home-care workers (N = 156, response rate = 34%). Overall, our study suggests that the consequences of performance-based contracting for professionalism are ambiguous. More specifically, using strict time registration rules is related to lower levels of autonomy, whereas using cost-efficiency measures does not seem to affect autonomy (H1). Performance-based contracting has no consequences for the level of fulfilment home-care workers find in their job, as neither of the two contracting dimensions measured was directly or indirectly related to intrinsic job satisfaction (H1, H2). The role of managers must be taken into account when studying performance-based contracting, because perceived higher management support is related to managers' less frequent use of both strict time registration rules and of cost-efficiency measures (H3). The insight we gained into the importance of supportive managers for both autonomy and job satisfaction (H4) can help home-care organisations improve the attractiveness of home-care work. © 2015 John Wiley & Sons Ltd.

Quantitative phase measurement for wafer-level optics

NASA Astrophysics Data System (ADS)

Qu, Weijuan; Wen, Yongfu; Wang, Zhaomin; Yang, Fang; Huang, Lei; Zuo, Chao

2015-07-01

Wafer-level-optics now is widely used in smart phone camera, mobile video conferencing or in medical equipment that require tiny cameras. Extracting quantitative phase information has received increased interest in order to quantify the quality of manufactured wafer-level-optics, detect defective devices before packaging, and provide feedback for manufacturing process control, all at the wafer-level for high-throughput microfabrication. We demonstrate two phase imaging methods, digital holographic microscopy (DHM) and Transport-of-Intensity Equation (TIE) to measure the phase of the wafer-level lenses. DHM is a laser-based interferometric method based on interference of two wavefronts. It can perform a phase measurement in a single shot. While a minimum of two measurements of the spatial intensity of the optical wave in closely spaced planes perpendicular to the direction of propagation are needed to do the direct phase retrieval by solving a second-order differential equation, i.e., with a non-iterative deterministic algorithm from intensity measurements using the Transport-of-Intensity Equation (TIE). But TIE is a non-interferometric method, thus can be applied to partial-coherence light. We demonstrated the capability and disability for the two phase measurement methods for wafer-level optics inspection.

Density-based clustering analyses to identify heterogeneous cellular sub-populations

NASA Astrophysics Data System (ADS)

Heaster, Tiffany M.; Walsh, Alex J.; Landman, Bennett A.; Skala, Melissa C.

2017-02-01

Autofluorescence microscopy of NAD(P)H and FAD provides functional metabolic measurements at the single-cell level. Here, density-based clustering algorithms were applied to metabolic autofluorescence measurements to identify cell-level heterogeneity in tumor cell cultures. The performance of the density-based clustering algorithm, DENCLUE, was tested in samples with known heterogeneity (co-cultures of breast carcinoma lines). DENCLUE was found to better represent the distribution of cell clusters compared to Gaussian mixture modeling. Overall, DENCLUE is a promising approach to quantify cell-level heterogeneity, and could be used to understand single cell population dynamics in cancer progression and treatment.

Radiofrequency radiation from nearby base stations gives high levels in an apartment in Stockholm, Sweden: A case report.

PubMed

Hardell, Lennart; Carlberg, Michael; Hedendahl, Lena K

2018-05-01

Exposure to radiofrequency (RF) radiation was classified in 2011 as a possible human carcinogen, Group 2B, by the International Agency for Research on Cancer of the World Health Organisation. Evidence of the risk of cancer risk has since strengthened. Exposure is changing due to the rapid development of technology resulting in increased ambient radiation. RF radiation of sufficient intensity heats tissues, but the energy is insufficient to cause ionization, hence it is called non-ionizing radiation. These non-thermal exposure levels have resulted in biological effects in humans, animals and cells, including an increased cancer risk. In the present study, the levels of RF radiation were measured in an apartment close to two groups of mobile phone base stations on the roof. A total of 74,531 measurements were made corresponding to ~83 h of recording. The total mean RF radiation level was 3,811 µW/m 2 (range 15.2-112,318 µW/m 2 ) for the measurement of the whole apartment, including balconies. Particularly high levels were measured on three balconies and 3 of 4 bedrooms. The total mean RF radiation level decreased by 98% when the measured down-links from the base stations for 2, 3 and 4 G were disregarded. The results are discussed in relation to the detrimental health effects of non-thermal RF radiation. Due to the current high RF radiation, the apartment is not suitable for long-term living, particularly for children who may be more sensitive than adults. For a definitive conclusion regarding the effect of RF radiation from nearby base stations, one option would be to turn them off and repeat the measurements. However, the simplest and safest solution would be to turn them off and dismantle them.

Radiofrequency radiation from nearby base stations gives high levels in an apartment in Stockholm, Sweden: A case report

PubMed Central

Hardell, Lennart; Carlberg, Michael; Hedendahl, Lena K.

2018-01-01

Exposure to radiofrequency (RF) radiation was classified in 2011 as a possible human carcinogen, Group 2B, by the International Agency for Research on Cancer of the World Health Organisation. Evidence of the risk of cancer risk has since strengthened. Exposure is changing due to the rapid development of technology resulting in increased ambient radiation. RF radiation of sufficient intensity heats tissues, but the energy is insufficient to cause ionization, hence it is called non-ionizing radiation. These non-thermal exposure levels have resulted in biological effects in humans, animals and cells, including an increased cancer risk. In the present study, the levels of RF radiation were measured in an apartment close to two groups of mobile phone base stations on the roof. A total of 74,531 measurements were made corresponding to ~83 h of recording. The total mean RF radiation level was 3,811 µW/m2 (range 15.2–112,318 µW/m2) for the measurement of the whole apartment, including balconies. Particularly high levels were measured on three balconies and 3 of 4 bedrooms. The total mean RF radiation level decreased by 98% when the measured down-links from the base stations for 2, 3 and 4 G were disregarded. The results are discussed in relation to the detrimental health effects of non-thermal RF radiation. Due to the current high RF radiation, the apartment is not suitable for long-term living, particularly for children who may be more sensitive than adults. For a definitive conclusion regarding the effect of RF radiation from nearby base stations, one option would be to turn them off and repeat the measurements. However, the simplest and safest solution would be to turn them off and dismantle them. PMID:29725476

Ground-water-level monitoring, basin boundaries, and potentiometric surfaces of the aquifer system at Edwards Air Force Base, California, 1992

USGS Publications Warehouse

Rewis, D.L.

1995-01-01

A ground-water-level monitoring program was implemented at Edwards Air Force Base, California, from January through December 1992 to monitor spatial and temporal changes in poten-tiometric surfaces that largely are affected by ground-water pumping. Potentiometric-surface maps are needed to determine the correlation between declining ground- water levels and the distribution of land subsidence. The monitoring program focused on areas of the base where pumping has occurred, especially near Rogers Lake, and involved three phases of data collection: (1) well canvassing and selection, (2) geodetic surveys, and (3) monthly ground-water-level measurements. Construction and historical water- level data were compiled for 118 wells and pi-ezometers on or near the base, and monthly ground-water-level measurements were made in 82 wells and piezometers on the base. The compiled water-level data were used in conjunction with previously collected geologic data to identify three types of no-flow boundaries in the aquifer system: structural boundaries, a principal-aquifer boundary, and ground-water divides. Heads were computed from ground-water-level measurements and land-surface altitudes and then were used to map seasonal potentiometric surfaces for the principal and deep aquifers underlying the base. Pumping has created a regional depression in the potentiometric surface of the deep aquifer in the South Track, South Base, and Branch Park well-field area. A 15-foot decline in the potentiometric surface from April to September 1992 and 20- to 30-foot drawdowns in the three production wells in the South Track well field caused locally unconfined conditions in the deep aquifer.

Development of a high-sensitivity and portable cell using Helmholtz resonance for noninvasive blood glucose-level measurement based on photoacoustic spectroscopy.

PubMed

Tachibana, K; Okada, K; Kobayashi, R; Ishihara, Y

2016-08-01

We describe the possibility of high-sensitivity noninvasive blood glucose measurement based on photoacoustic spectroscopy (PAS). The demand for noninvasive blood glucose-level measurement has increased due to the explosive increase in diabetic patients. We have developed a noninvasive blood glucose-level measurement based on PAS. The conventional method uses a straight-type resonant cell. However, the cell volume is large, which results in a low detection sensitivity and difficult portability. In this paper, a small-sized Helmholtz-type resonant cell is proposed to improve detection sensitivity and portability by reducing the cell dead volume. First, the acoustic property of the small-sized Helmholtz-type resonant cell was evaluated by performing an experiment using a silicone rubber. As a result, the detection sensitivity of the small-sized Helmholtz-type resonant cell was approximately two times larger than that of the conventional straight-type resonant cell. In addition, the inside volume was approximately 30 times smaller. Second, the detection limits of glucose concentration were estimated by performing an experiment using glucose solutions. The experimental results showed that a glucose concentration of approximately 1% was detected by the small-sized Helmholtz-type resonant cell. Although these results on the sensitivity of blood glucose-level measurement are currently insufficient, they suggest that miniaturization of a resonance cell is effective in the application of noninvasive blood glucose-level measurement.

Correlation of cystatin C and creatinine based estimates of renal function in children with hydronephrosis.

PubMed

Momtaz, Hossein-Emad; Dehghan, Arash; Karimian, Mohammad

2016-01-01

The use of a simple and accurate glomerular filtration rate (GFR) estimating method aiming minute assessment of renal function can be of great clinical importance. This study aimed to determine the association of a GFR estimating by equation that includes only cystatin C (Gentian equation) to equation that include only creatinine (Schwartz equation) among children. A total of 31 children aged from 1 day to 5 years with the final diagnosis of unilateral or bilateral hydronephrosis referred to Besat hospital in Hamadan, between March 2010 and February 2011 were consecutively enrolled. Schwartz and Gentian equations were employed to determine GFR based on plasma creatinine and cystatin C levels, respectively. The proportion of GFR based on Schwartz equation was 70.19± 24.86 ml/min/1.73 m(2), while the level of this parameter based on Gentian method and using cystatin C was 86.97 ± 21.57 ml/min/1.73 m(2). The Pearson correlation coefficient analysis showed a strong direct association between the two levels of GFR measured by Schwartz equation based on serum creatinine level and Gentian method and using cystatin C (r = 0.594, P < 0.001). The linear association between GFR values measured with the two methods included cystatin C based GFR = 50.8+ 0.515 × Schwartz GFR. The correlation between GFR values measured by using serum creatinine and serum cystatin C measurements remained meaningful even after adjustment for patients' gender and age (r = 0.724, P < 0.001). The equation developed based on cystatin C level is comparable with another equation, based on serum creatinine (Schwartz formula) to estimate GFR in children.

Occupational Exposure to Cobalt and Tungsten in the Swedish Hard Metal Industry: Air Concentrations of Particle Mass, Number, and Surface Area

PubMed Central

Bryngelsson, Ing-Liss; Pettersson, Carin; Husby, Bente; Arvidsson, Helena; Westberg, Håkan

2016-01-01

Exposure to cobalt in the hard metal industry entails severe adverse health effects, including lung cancer and hard metal fibrosis. The main aim of this study was to determine exposure air concentration levels of cobalt and tungsten for risk assessment and dose–response analysis in our medical investigations in a Swedish hard metal plant. We also present mass-based, particle surface area, and particle number air concentrations from stationary sampling and investigate the possibility of using these data as proxies for exposure measures in our study. Personal exposure full-shift measurements were performed for inhalable and total dust, cobalt, and tungsten, including personal real-time continuous monitoring of dust. Stationary measurements of inhalable and total dust, PM2.5, and PM10 was also performed and cobalt and tungsten levels were determined, as were air concentration of particle number and particle surface area of fine particles. The personal exposure levels of inhalable dust were consistently low (AM 0.15mg m−3, range <0.023–3.0mg m−3) and below the present Swedish occupational exposure limit (OEL) of 10mg m−3. The cobalt levels were low as well (AM 0.0030mg m−3, range 0.000028–0.056mg m−3) and only 6% of the samples exceeded the Swedish OEL of 0.02mg m−3. For continuous personal monitoring of dust exposure, the peaks ranged from 0.001 to 83mg m−3 by work task. Stationary measurements showed lower average levels both for inhalable and total dust and cobalt. The particle number concentration of fine particles (AM 3000 p·cm−3) showed the highest levels at the departments of powder production, pressing and storage, and for the particle surface area concentrations (AM 7.6 µm2·cm−3) similar results were found. Correlating cobalt mass-based exposure measurements to cobalt stationary mass-based, particle area, and particle number concentrations by rank and department showed significant correlations for all measures except for particle number. Linear regression analysis of the same data showed statistically significant regression coefficients only for the mass-based aerosol measures. Similar results were seen for rank correlation in the stationary rig, and linear regression analysis implied significant correlation for mass-based and particle surface area measures. The mass-based air concentration levels of cobalt and tungsten in the hard metal plant in our study were low compared to Swedish OELs. Particle number and particle surface area concentrations were in the same order of magnitude as for other industrial settings. Regression analysis implied the use of stationary determined mass-based and particle surface area aerosol concentration as proxies for various exposure measures in our study. PMID:27143598

Looking Under the Streetlight? A Framework for Differentiating Performance Measures by Level of Care in a Value-Based Payment Environment

PubMed Central

Van Such, Monica B.; Nesse, Robert E.; Dilling, James A.; Swensen, Stephen J.; Thompson, Kristine M.; Orlowski, Janis M.; Santrach, Paula J.

2017-01-01

The majority of quality measures used to assess providers and hospitals are based on easily obtained data, focused on a few dimensions of quality, and developed mainly for primary/community care and population health. While this approach supports efforts focused on addressing the triple aim of health care, many current quality report cards and assessments do not reflect the breadth or complexity of many referral center practices. In this article, the authors highlight the differences between population health efforts and referral care and address issues related to value measurement and performance assessment. They discuss why measures may need to differ across the three levels of care (primary/community care, secondary care, complex care) and illustrate the need for further risk adjustment to eliminate referral bias. With continued movement toward value-based purchasing, performance measures and reimbursement schemes need to reflect the increased level of intensity required to provide complex care. The authors propose a framework to operationalize value measurement and payment for specialty care, and they make specific recommendations to improve performance measurement for complex patients. Implementing such a framework to differentiate performance measures by level of care involves coordinated efforts to change both policy and operational platforms. An essential component of this framework is a new model that defines the characteristics of patients who require complex care and standardizes metrics that incorporate those definitions. PMID:28353502

Looking Under the Streetlight? A Framework for Differentiating Performance Measures by Level of Care in a Value-Based Payment Environment.

PubMed

Naessens, James M; Van Such, Monica B; Nesse, Robert E; Dilling, James A; Swensen, Stephen J; Thompson, Kristine M; Orlowski, Janis M; Santrach, Paula J

2017-07-01

The majority of quality measures used to assess providers and hospitals are based on easily obtained data, focused on a few dimensions of quality, and developed mainly for primary/community care and population health. While this approach supports efforts focused on addressing the triple aim of health care, many current quality report cards and assessments do not reflect the breadth or complexity of many referral center practices.In this article, the authors highlight the differences between population health efforts and referral care and address issues related to value measurement and performance assessment. They discuss why measures may need to differ across the three levels of care (primary/community care, secondary care, complex care) and illustrate the need for further risk adjustment to eliminate referral bias.With continued movement toward value-based purchasing, performance measures and reimbursement schemes need to reflect the increased level of intensity required to provide complex care. The authors propose a framework to operationalize value measurement and payment for specialty care, and they make specific recommendations to improve performance measurement for complex patients. Implementing such a framework to differentiate performance measures by level of care involves coordinated efforts to change both policy and operational platforms. An essential component of this framework is a new model that defines the characteristics of patients who require complex care and standardizes metrics that incorporate those definitions.

A Deep Neural Network Model for Rainfall Estimation UsingPolarimetric WSR-88DP Radar Observations

NASA Astrophysics Data System (ADS)

Tan, H.; Chandra, C. V.; Chen, H.

2016-12-01

Rainfall estimation based on radar measurements has been an important topic for a few decades. Generally, radar rainfall estimation is conducted through parametric algorisms such as reflectivity-rainfall relation (i.e., Z-R relation). On the other hand, neural networks are developed for ground rainfall estimation based on radar measurements. This nonparametric method, which takes into account of both radar observations and rainfall measurements from ground rain gauges, has been demonstrated successfully for rainfall rate estimation. However, the neural network-based rainfall estimation is limited in practice due to the model complexity and structure, data quality, as well as different rainfall microphysics. Recently, the deep learning approach has been introduced in pattern recognition and machine learning areas. Compared to traditional neural networks, the deep learning based methodologies have larger number of hidden layers and more complex structure for data representation. Through a hierarchical learning process, the high level structured information and knowledge can be extracted automatically from low level features of the data. In this paper, we introduce a novel deep neural network model for rainfall estimation based on ground polarimetric radar measurements .The model is designed to capture the complex abstractions of radar measurements at different levels using multiple layers feature identification and extraction. The abstractions at different levels can be used independently or fused with other data resource such as satellite-based rainfall products and/or topographic data to represent the rain characteristics at certain location. In particular, the WSR-88DP radar and rain gauge data collected in Dallas - Fort Worth Metroplex and Florida are used extensively to train the model, and for demonstration purposes. Quantitative evaluation of the deep neural network based rainfall products will also be presented, which is based on an independent rain gauge network.

The Apollo Accreditation Program: A web-based Joint Commission International standards compliance management tool.

PubMed

Dewan, Shaveta; Sibal, Anupam; Uberoi, R S; Kaur, Ishneet; Nayak, Yogamaya; Kar, Sujoy; Loria, Gaurav; Yatheesh, G; Balaji, V

2014-01-01

Creating and implementing processes to deliver quality care in compliance with accreditation standards is a challenging task but even more daunting is sustaining these processes and systems. There is need for frequent monitoring of the gap between the expected level of care and the level of care actually delivered so as to achieve consistent level of care. The Apollo Accreditation Program (AAP) was implemented as a web-based single measurable dashboard to display, measure and compare compliance levels for established standards of care in JCI accredited hospitals every quarter and resulted in an overall 15.5% improvement in compliance levels over one year.

An Evidence-Based Multidisciplinary Practice Guideline to Reduce the Workload due to Lifting for Preventing Work-Related Low Back Pain

PubMed Central

2014-01-01

We developed an evidence-based practice guideline to support occupational safety and health (OSH) professionals in assessing the risk due to lifting and in selecting effective preventive measures for low back pain (LBP) in the Netherlands. The guideline was developed at the request of the Dutch government by a project team of experts and OSH professionals in lifting and work-related LBP. The recommendations for risk assessment were based on the quality of instruments to assess the risk on LBP due to lifting. Recommendations for interventions were based on a systematic review of the effects of worker- and work directed interventions to reduce back load due to lifting. The quality of the evidence was rated as strong (A), moderate (B), limited (C) or based on consensus (D). Finally, eight experts and twenty-four OSH professionals commented on and evaluated the content and the feasibility of the preliminary guideline. For risk assessment we recommend loads heavier than 25 kg always to be considered a risk for LBP while loads less than 3 kg do not pose a risk. For loads between 3–25 kg, risk assessment shall be performed using the Manual handling Assessment Charts (MAC)-Tool or National Institute for Occupational Safety and Health (NIOSH) lifting equation. Effective work oriented interventions are patient lifting devices (Level A) and lifting devices for goods (Level C), optimizing working height (Level A) and reducing load mass (Level C). Ineffective work oriented preventive measures are regulations to ban lifting without proper alternatives (Level D). We do not recommend worker-oriented interventions but consider personal lift assist devices as promising (Level C). Ineffective worker-oriented preventive measures are training in lifting technique (Level A), use of back-belts (Level A) and pre-employment medical examinations (Level A). This multidisciplinary evidence-based practice guideline gives clear criteria whether an employee is at risk for LBP while lifting and provides an easy-reference for (in)effective risk reduction measures based on scientific evidence, experience, and consensus among OSH experts and practitioners. PMID:24999432

An Evidence-Based Multidisciplinary Practice Guideline to Reduce the Workload due to Lifting for Preventing Work-Related Low Back Pain.

PubMed

Kuijer, P Paul Fm; Verbeek, Jos Ham; Visser, Bart; Elders, Leo Am; Van Roden, Nico; Van den Wittenboer, Marion Er; Lebbink, Marian; Burdorf, Alex; Hulshof, Carel Tj

2014-01-01

We developed an evidence-based practice guideline to support occupational safety and health (OSH) professionals in assessing the risk due to lifting and in selecting effective preventive measures for low back pain (LBP) in the Netherlands. The guideline was developed at the request of the Dutch government by a project team of experts and OSH professionals in lifting and work-related LBP. The recommendations for risk assessment were based on the quality of instruments to assess the risk on LBP due to lifting. Recommendations for interventions were based on a systematic review of the effects of worker- and work directed interventions to reduce back load due to lifting. The quality of the evidence was rated as strong (A), moderate (B), limited (C) or based on consensus (D). Finally, eight experts and twenty-four OSH professionals commented on and evaluated the content and the feasibility of the preliminary guideline. For risk assessment we recommend loads heavier than 25 kg always to be considered a risk for LBP while loads less than 3 kg do not pose a risk. For loads between 3-25 kg, risk assessment shall be performed using the Manual handling Assessment Charts (MAC)-Tool or National Institute for Occupational Safety and Health (NIOSH) lifting equation. Effective work oriented interventions are patient lifting devices (Level A) and lifting devices for goods (Level C), optimizing working height (Level A) and reducing load mass (Level C). Ineffective work oriented preventive measures are regulations to ban lifting without proper alternatives (Level D). We do not recommend worker-oriented interventions but consider personal lift assist devices as promising (Level C). Ineffective worker-oriented preventive measures are training in lifting technique (Level A), use of back-belts (Level A) and pre-employment medical examinations (Level A). This multidisciplinary evidence-based practice guideline gives clear criteria whether an employee is at risk for LBP while lifting and provides an easy-reference for (in)effective risk reduction measures based on scientific evidence, experience, and consensus among OSH experts and practitioners.

High level language for measurement complex control based on the computer E-100I

NASA Technical Reports Server (NTRS)

Zubkov, B. V.

1980-01-01

A high level language was designed to control the process of conducting an experiment using the computer "Elektrinika-1001". Program examples are given to control the measuring and actuating devices. The procedure of including these programs in the suggested high level language is described.

Output power distributions of mobile radio base stations based on network measurements

NASA Astrophysics Data System (ADS)

Colombi, D.; Thors, B.; Persson, T.; Wirén, N.; Larsson, L.-E.; Törnevik, C.

2013-04-01

In this work output power distributions of mobile radio base stations have been analyzed for 2G and 3G telecommunication systems. The approach is based on measurements in selected networks using performance surveillance tools part of the network Operational Support System (OSS). For the 3G network considered, direct measurements of output power levels were possible, while for the 2G networks, output power levels were estimated from measurements of traffic volumes. Both voice and data services were included in the investigation. Measurements were conducted for large geographical areas, to ensure good overall statistics, as well as for smaller areas to investigate the impact of different environments. For high traffic hours, the 90th percentile of the averaged output power was found to be below 65% and 45% of the available output power for the 2G and 3G systems, respectively.

Statistical analysis of electromagnetic radiation measurements in the vicinity of GSM/UMTS base station installed on buildings in Serbia.

PubMed

Koprivica, Mladen; Slavkovic, Vladimir; Neskovic, Natasa; Neskovic, Aleksandar

2016-03-01

As a result of dense deployment of public mobile base stations, additional electromagnetic (EM) radiation occurs in the modern human environment. At the same time, public concern about the exposure to EM radiation emitted by such sources has increased. In order to determine the level of radio frequency radiation generated by base stations, extensive EM field strength measurements were carried out for 664 base station locations, from which 276 locations refer to the case of base stations with antenna system installed on buildings. Having in mind the large percentage (42 %) of locations with installations on buildings, as well as the inevitable presence of people in their vicinity, a detailed analysis of this location category was performed. Measurement results showed that the maximum recorded value of total electric field strength has exceeded International Commission on Non-Ionizing Radiation Protection general public exposure reference levels at 2.5 % of locations and Serbian national reference levels at 15.6 % of locations. It should be emphasised that the values exceeding the reference levels were observed only outdoor, while in indoor total electric field strength in no case exceeded the defined reference levels. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Curriculum-Based Measurement in Science Learning: Vocabulary-Matching as an Indicator of Performance and Progress

ERIC Educational Resources Information Center

Espin, Christine A.; Busch, Todd W.; Lembke, Erica S.; Hampton, David D.; Seo, Kyounghee; Zukowski, Beth A.

2013-01-01

The technical adequacy of curriculum-based measures in the form of short and simple vocabulary-matching probes to predict students' performance and progress in science at the secondary level was investigated. Participants were 198 seventh-grade students from 10 science classrooms. Curriculum-based measurements (CBM) were 5-min vocabulary-matching…

Groundwater level and specific conductance monitoring at Marine Corps Base, Camp Lejeune, Onslow County, North Carolina, 2007-2008

USGS Publications Warehouse

McSwain, Kristen Bukowski

2010-01-01

The U.S. Geological Survey, in cooperation with the Marine Corps Base, Camp Lejeune, monitored water-resources conditions in the surficial, Castle Hayne, Peedee, and Black Creek aquifers in Onslow County, North Carolina, from November 2007 through September 2008. To comply with North Carolina Central Coastal Plain Capacity Use Area regulations, large-volume water suppliers in Onslow County must reduce their dependency on the Black Creek aquifer as a water-supply source and have, instead, proposed using the Castle Hayne aquifer as an alternative water-supply source. The Marine Corps Base, Camp Lejeune, uses water obtained from the unregulated surficial and Castle Hayne aquifers for drinking-water supply. Water-level data were collected and field measurements of physical properties were made at 19 wells at 8 locations spanning the Marine Corps Base, Camp Lejeune. These wells were instrumented with near real-time monitoring equipment to collect hourly measurements of water level. Additionally, specific conductance and water temperature were measured hourly in 16 of the 19 wells. Graphs are presented relating altitude of groundwater level to water temperature and specific conductance measurements collected during the study, and the relative vertical gradients between aquifers are discussed. The period-of-record normal (25th to 75th percentile) monthly mean groundwater levels at two well clusters were compared to median monthly mean groundwater levels at these same well clusters for 2008 to determine groundwater-resources conditions. In 2008, water levels were below normal in the 3 wells at one of the well clusters and were normal in 4 wells at the other cluster.

Non-invasive cortisol measurements as indicators of physiological stress responses in guinea pigs

PubMed Central

Pschernig, Elisabeth; Wallner, Bernard; Millesi, Eva

2016-01-01

Non-invasive measurements of glucocorticoid (GC) concentrations, including cortisol and corticosterone, serve as reliable indicators of adrenocortical activities and physiological stress loads in a variety of species. As an alternative to invasive analyses based on plasma, GC concentrations in saliva still represent single-point-of-time measurements, suitable for studying short-term or acute stress responses, whereas fecal GC metabolites (FGMs) reflect overall stress loads and stress responses after a species-specific time frame in the long-term. In our study species, the domestic guinea pig, GC measurements are commonly used to indicate stress responses to different environmental conditions, but the biological relevance of non-invasive measurements is widely unknown. We therefore established an experimental protocol based on the animals’ natural stress responses to different environmental conditions and compared GC levels in plasma, saliva, and fecal samples during non-stressful social isolations and stressful two-hour social confrontations with unfamiliar individuals. Plasma and saliva cortisol concentrations were significantly increased directly after the social confrontations, and plasma and saliva cortisol levels were strongly correlated. This demonstrates a high biological relevance of GC measurements in saliva. FGM levels measured 20 h afterwards, representing the reported mean gut passage time based on physiological validations, revealed that the overall stress load was not affected by the confrontations, but also no relations to plasma cortisol levels were detected. We therefore measured FGMs in two-hour intervals for 24 h after another social confrontation and detected significantly increased levels after four to twelve hours, reaching peak concentrations already after six hours. Our findings confirm that non-invasive GC measurements in guinea pigs are highly biologically relevant in indicating physiological stress responses compared to circulating levels in plasma in the short- and long-term. Our approach also underlines the importance of detailed investigations on how to use and interpret non-invasive measurements, including the determination of appropriate time points for sample collections. PMID:26839750

Comparative evaluation of twenty pilot workload assessment measure using a psychomotor task in a moving base aircraft simulator

NASA Technical Reports Server (NTRS)

Connor, S. A.; Wierwille, W. W.

1983-01-01

A comparison of the sensitivity and intrusion of twenty pilot workload assessment techniques was conducted using a psychomotor loading task in a three degree of freedom moving base aircraft simulator. The twenty techniques included opinion measures, spare mental capacity measures, physiological measures, eye behavior measures, and primary task performance measures. The primary task was an instrument landing system (ILS) approach and landing. All measures were recorded between the outer marker and the middle marker on the approach. Three levels (low, medium, and high) of psychomotor load were obtained by the combined manipulation of windgust disturbance level and simulated aircraft pitch stability. Six instrument rated pilots participated in four seasons lasting approximately three hours each.

Analysis of Particle Image Velocimetry (PIV) Data for Acoustic Velocity Measurements

NASA Technical Reports Server (NTRS)

Blackshire, James L.

1997-01-01

Acoustic velocity measurements were taken using Particle Image Velocimetry (PIV) in a Normal Incidence Tube configuration at various frequency, phase, and amplitude levels. This report presents the results of the PIV analysis and data reduction portions of the test and details the processing that was done. Estimates of lower measurement sensitivity levels were determined based on PIV image quality, correlation, and noise level parameters used in the test. Comparison of measurements with linear acoustic theory are presented. The onset of nonlinear, harmonic frequency acoustic levels were also studied for various decibel and frequency levels ranging from 90 to 132 dB and 500 to 3000 Hz, respectively.

Measurement of Non-Invasive Blood Glucose Level Based Sensor Color TCS3200 and Arduino

NASA Astrophysics Data System (ADS)

Kurniadi Wardana, Humaidillah; Indahwati, Elly; Arifah Fitriyah, Lina

2018-04-01

Design and measurement of Arduino-based urinary (non-invasive) urine glucose using RGB tcs3200 sensor. This research was conducted by making use of the urine in diabetes patients detected by sensor colours then measured levels of colour based on the RGB colour of the urine of diabetics. The detection is done on 4 urine samples with each consisting of 3 diabetics and 1 non-diabetics. Equipment used in this research, among others, Arduino Uno, colour sensor tcs3200, LCD 16x4. The results showed that the detection of RGB values in diabetics 230 with blue and not diabetics 200 with red.

Consensus–based approach to develop a measurement framework and identify a core set of indicators to track implementation and progress towards effective coverage of facility–based Kangaroo Mother Care

PubMed Central

Guenther, Tanya; Moxon, Sarah; Valsangkar, Bina; Wetzel, Greta; Ruiz, Juan; Kerber, Kate; Blencowe, Hannah; Dube, Queen; Vani, Shashi N; Vivio, Donna; Magge, Hema; De Leon–Mendoza, Socorro; Patterson, Janna; Mazia, Goldy

2017-01-01

Background As efforts to scale up the delivery of Kangaroo Mother Care (KMC) in facilities are increasing, a standardized approach to measure implementation and progress towards effective coverage is needed. Here, we describe a consensus–based approach to develop a measurement framework and identify a core set of indicators for monitoring facility–based KMC that would be feasible to measure within existing systems. Methods The KMC measurement framework and core list of indicators were developed through: 1) scoping exercise to identify potential indicators through literature review and requests from researchers and program implementers; and 2) face–to–face consultations with KMC and measurement experts working at country and global levels to review candidate indicators and finalize selection and definitions. Results The KMC measurement framework includes two main components: 1) service readiness, based on the WHO building blocks framework; and 2) service delivery action sequence covering identification, service initiation, continuation to discharge, and follow–up to graduation. Consensus was reached on 10 core indicators for KMC, which were organized according to the measurement framework. We identified 4 service readiness indicators, capturing national level policy for KMC, availability of KMC indicators in HMIS, costed operational plans for KMC and availability of KMC services at health facilities with inpatient maternity services. Six indicators were defined for service delivery, including weighing of babies at birth, identification of those ≤2000 g, initiation of facility–based KMC, monitoring the quality of KMC, status of babies at discharge from the facility and levels of follow–up (according to country–specific protocol). Conclusions These core KMC indicators, identified with input from a wide range of global and country–level KMC and measurement experts, can aid efforts to strengthen monitoring systems and facilitate global tracking of KMC implementation. As data collection systems advance, we encourage program managers and evaluators to document their experiences using this framework to measure progress and allow indicator refinement, with the overall aim of working towards sustainable, country–led data systems. PMID:29057074

Consensus-based approach to develop a measurement framework and identify a core set of indicators to track implementation and progress towards effective coverage of facility-based Kangaroo Mother Care.

PubMed

Guenther, Tanya; Moxon, Sarah; Valsangkar, Bina; Wetzel, Greta; Ruiz, Juan; Kerber, Kate; Blencowe, Hannah; Dube, Queen; Vani, Shashi N; Vivio, Donna; Magge, Hema; De Leon-Mendoza, Socorro; Patterson, Janna; Mazia, Goldy

2017-12-01

As efforts to scale up the delivery of Kangaroo Mother Care (KMC) in facilities are increasing, a standardized approach to measure implementation and progress towards effective coverage is needed. Here, we describe a consensus-based approach to develop a measurement framework and identify a core set of indicators for monitoring facility-based KMC that would be feasible to measure within existing systems. The KMC measurement framework and core list of indicators were developed through: 1) scoping exercise to identify potential indicators through literature review and requests from researchers and program implementers; and 2) face-to-face consultations with KMC and measurement experts working at country and global levels to review candidate indicators and finalize selection and definitions. The KMC measurement framework includes two main components: 1) service readiness, based on the WHO building blocks framework; and 2) service delivery action sequence covering identification, service initiation, continuation to discharge, and follow-up to graduation. Consensus was reached on 10 core indicators for KMC, which were organized according to the measurement framework. We identified 4 service readiness indicators, capturing national level policy for KMC, availability of KMC indicators in HMIS, costed operational plans for KMC and availability of KMC services at health facilities with inpatient maternity services. Six indicators were defined for service delivery, including weighing of babies at birth, identification of those ≤2000 g, initiation of facility-based KMC, monitoring the quality of KMC, status of babies at discharge from the facility and levels of follow-up (according to country-specific protocol). These core KMC indicators, identified with input from a wide range of global and country-level KMC and measurement experts, can aid efforts to strengthen monitoring systems and facilitate global tracking of KMC implementation. As data collection systems advance, we encourage program managers and evaluators to document their experiences using this framework to measure progress and allow indicator refinement, with the overall aim of working towards sustainable, country-led data systems.

Measuring the Return on Information Technology: A Knowledge-Based Approach for Revenue Allocation at the Process and Firm Level

DTIC Science & Technology

2005-07-01

approach for measuring the return on Information Technology (IT) investments. A review of existing methods suggests the difficulty in adequately...measuring the returns of IT at various levels of analysis (e.g., firm or process level). To address this issue, this study aims to develop a method for...view (KBV), this paper proposes an analytic method for measuring the historical revenue and cost of IT investments by estimating the amount of

Precision of noninvasive hemoglobin-level measurement by pulse co-oximetry in patients admitted to intensive care units for severe gastrointestinal bleeds.

PubMed

Coquin, Julien; Dewitte, Antoine; Manach, Yannick Le; Caujolle, Marie; Joannes-Boyau, Olivier; Fleureau, Catherine; Janvier, Gérard; Ouattara, Alexandre

2012-09-01

Measurement of total hemoglobin, based on pulse co-oximetry, is a continuous and noninvasive method that has been principally evaluated in healthy volunteers subjected to hemodilution. We tested the hypothesis that its accuracy could adversely affect patients presenting with severe hemorrhage, which is traditionally associated with increased microvascular tone. Observational study. Twelve-bed mixed medico-surgical intensive care unit. Thirty-three patients admitted to our critical care unit for gastrointestinal bleeds were included. A spectrophotometric sensor was positioned on the patient's fingertip and connected to a pulse co-oximeter. During the first 24 hrs following admission, venous hemoglobin level was determined at the laboratory every 8 hrs and was compared with hemoglobin levels displayed on the pulse co-oximeter measurements screen and/or measured from capillary blood using a portable photometer. The primary end point was the percentage of inaccurate measurements, which were defined as >15% difference compared with reference values or their unavailability for any technical reason. Twenty-five (19%) measurements of pulse co-oximeter measurements were unavailable from the screen. Pulse co-oximeter measurements and capillary hemoglobin levels were significantly correlated to venous hemoglobin level. For venous hemoglobin level compared with pulse co-oximeter measurements (n = 105), and for venous hemoglobin level compared with capillary hemoglobin levels (n = 111), the biases were, respectively, 1.0 ± 1.9 g dL and 0.4 ± 1.0 g dL (p < .05). The proportion of inaccurate measurements was significantly higher for pulse co-oximeter measurements (56% vs. 15%, p < .05). Although the use of norepinephrine did not affect concordance parameters, unavailability of measurements was frequently observed (42% vs. 15%, p < .05). Determination of pulse co-oximetry-based hemoglobin in patients presenting with severe gastrointestinal bleeds can be inaccurate, which renders its use to guide transfusion decisions potentially hazardous. The unavailability of measurements, especially during vasopressor infusion, represents another serious limitation for hemorrhagic patients.

HPV16 seropositivity and subsequent HPV16 infection risk in a naturally infected population: comparison of serological assays.

PubMed

Lin, Shih-Wen; Ghosh, Arpita; Porras, Carolina; Markt, Sarah C; Rodriguez, Ana Cecilia; Schiffman, Mark; Wacholder, Sholom; Kemp, Troy J; Pinto, Ligia A; Gonzalez, Paula; Wentzensen, Nicolas; Esser, Mark T; Matys, Katie; Meuree, Ariane; Quint, Wim; van Doorn, Leen-Jan; Herrero, Rolando; Hildesheim, Allan; Safaeian, Mahboobeh

2013-01-01

Several serological assays have been developed to detect antibodies elicited against infections with oncogenic human papillomavirus (HPV) type 16. The association between antibody levels measured by various assays and subsequent HPV infection risk may differ. We compared HPV16-specific antibody levels previously measured by a virus-like particle (VLP)-based direct enzyme-linked immunoassay (ELISA) with levels measured by additional assays and evaluated the protection against HPV16 infection conferred at different levels of the assays. Replicate enrollment serum aliquots from 388 unvaccinated women in the control arm of the Costa Rica HPV vaccine trial were measured for HPV16 seropositivity using three serological assays: a VLP-based direct ELISA; a VLP-based competitive Luminex immunoassay (cLIA); and a secreted alkaline phosphatase protein neutralization assay (SEAP-NA). We assessed the association of assay seropositivity and risk of subsequent HPV16 infection over four years of follow-up by calculating sampling-adjusted odds ratios (OR) and HPV16 seropositivity based on standard cutoff from the cLIA was significantly associated with protection from subsequent HPV16 infection (OR = 0.48, CI = 0.27-0.86, compared with seronegatives). Compared with seronegatives, the highest seropositive tertile antibody levels from the direct ELISA (OR = 0.53, CI = 0.28-0.90) as well as the SEAP-NA (OR = 0.20, CI = 0.06, 0.64) were also significantly associated with protection from HPV16 infection. Enrollment HPV16 seropositivity by any of the three serological assays evaluated was associated with protection from subsequent infection, although cutoffs for immune protection were different. We defined the assays and seropositivity levels after natural infection that better measure and translate to protective immunity.

Implications of weight-based stigma and self-bias on quality of life among individuals with Schizophrenia

PubMed Central

Barber, Jessica; Palmese, Laura; Reutenauer, Erin L.; Grilo, Carlos; Tek, Cenk

2011-01-01

Obesity has been associated with significant stigma and weight-related self-bias in community and clinical studies, but these issues have not been studied among individuals with schizophrenia. A consecutive series of 70 obese individuals with schizophrenia or schizoaffective disorder underwent assessment for perceptions of weight-based stigmatization, self-directed weight-bias, negative affect, medication compliance, and quality of life. Levels of weight-based stigmatization and self-bias were compared to levels reported for non-psychiatric overweight/obese samples. Weight measures were unrelated to stigma, self-bias, affect, and quality of life. Weight-based stigmatization was lower than published levels for non-psychiatric samples, whereas levels of weight-based self-bias did not differ. After controlling for negative affect, weight-based self-bias predicted an additional 11% of the variance in the quality of life measure. Individuals with schizophrenia and schizoaffective disorder reported weight-based self-bias to the same extent as non-psychiatric samples despite reporting less weight stigma. Weight-based self-bias was associated with poorer quality of life after controlling for negative affect. PMID:21716053

Statistical analysis of electromagnetic radiation measurements in the vicinity of indoor microcell GSM/UMTS base stations in Serbia.

PubMed

Koprivica, Mladen; Petrić, Majda; Nešković, Nataša; Nešković, Aleksandar

2016-01-01

To determine the level of radiofrequency radiation generated by base stations of Global System for Mobile Communications and Universal Mobile Telecommunication System, extensive electromagnetic field strength measurements were carried out in the vicinity of 664 base station locations. These were classified into three categories: indoor, masts, and locations with installations on buildings. Although microcell base stations with antennas installed indoors typically emit less power than outdoor macrocell base stations, the fact that people can be found close to antennas requires exposure originating from these base stations to be carefully considered. Measurement results showed that maximum recorded value of electric field strength exceeded International Commission on Non-Ionizing Radiation Protection reference levels at 7% of indoor base station locations. At the same time, this percentage was much lower in the case of masts and installations on buildings (0% and 2.5%, respectively). © 2015 Wiley Periodicals, Inc.

45 CFR 305.33 - Determination of applicable percentages based on performance levels.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF HEALTH AND HUMAN SERVICES PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.33 Determination of applicable percentages based on performance levels. (a) A State's... performance levels. 305.33 Section 305.33 Public Welfare Regulations Relating to Public Welfare OFFICE OF...

RLV-TD Flight Measured Aeroacoustic Levels and its Comparison with Predictions

NASA Astrophysics Data System (ADS)

Manokaran, K.; Prasath, M.; Venkata Subrahmanyam, B.; Ganesan, V. R.; Ravindran, Archana; Babu, C.

2017-12-01

The Reusable Launch Vehicle-Technology Demonstrator (RLV-TD) is a wing body configuration successfully flight tested. One of the important flight measurements is the acoustic levels. There were five external microphones, mounted on the fuselage-forebody, wing, vertical tail, inter-stage (ITS) and core base shroud to measure the acoustic levels from lift-off to splash down. In the ascent phase, core base shroud recorded the overall maximum at both lift-off and transonic conditions. In-flight noise levels measured on the wing is second highest, followed by fuselage and vertical tail. Predictions for flight trajectory compare well at all locations except for vertical tail (4.5 dB). In the descent phase, maximum measured OASPL occurs at transonic condition for the wing, followed by vertical tail and fuselage. Predictions for flight trajectory compare well at all locations except for wing (- 6.0 dB). Spectrum comparison is good in the ascent phase compared to descent phase. Roll Reaction control system (RCS) thruster firing signature is seen in the acoustic measurements on the wing and vertical tail during lift-off.

Solution to the mean king's problem with mutually unbiased bases for arbitrary levels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimura, Gen; Tanaka, Hajime; Ozawa, Masanao

2006-05-15

The mean king's problem with mutually unbiased bases is reconsidered for arbitrary d-level systems. Hayashi et al. [Phys. Rev. A 71, 052331 (2005)] related the problem to the existence of a maximal set of d-1 mutually orthogonal Latin squares, in their restricted setting that allows only measurements of projection-valued measures. However, we then cannot find a solution to the problem when, e.g., d=6 or d=10. In contrast to their result, we show that the king's problem always has a solution for arbitrary levels if we also allow positive operator-valued measures. In constructing the solution, we use orthogonal arrays in combinatorialmore » design theory.« less

Machine characterization based on an abstract high-level language machine

NASA Technical Reports Server (NTRS)

Saavedra-Barrera, Rafael H.; Smith, Alan Jay; Miya, Eugene

1989-01-01

Measurements are presented for a large number of machines ranging from small workstations to supercomputers. The authors combine these measurements into groups of parameters which relate to specific aspects of the machine implementation, and use these groups to provide overall machine characterizations. The authors also define the concept of pershapes, which represent the level of performance of a machine for different types of computation. A metric based on pershapes is introduced that provides a quantitative way of measuring how similar two machines are in terms of their performance distributions. The metric is related to the extent to which pairs of machines have varying relative performance levels depending on which benchmark is used.

Accuracy of Handheld Blood Glucose Meters at High Altitude

PubMed Central

de Vries, Suzanna T.; Fokkert, Marion J.; Dikkeschei, Bert D.; Rienks, Rienk; Bilo, Karin M.; Bilo, Henk J. G.

2010-01-01

Background Due to increasing numbers of people with diabetes taking part in extreme sports (e.g., high-altitude trekking), reliable handheld blood glucose meters (BGMs) are necessary. Accurate blood glucose measurement under extreme conditions is paramount for safe recreation at altitude. Prior studies reported bias in blood glucose measurements using different BGMs at high altitude. We hypothesized that glucose-oxidase based BGMs are more influenced by the lower atmospheric oxygen pressure at altitude than glucose dehydrogenase based BGMs. Methodology/Principal Findings Glucose measurements at simulated altitude of nine BGMs (six glucose dehydrogenase and three glucose oxidase BGMs) were compared to glucose measurement on a similar BGM at sea level and to a laboratory glucose reference method. Venous blood samples of four different glucose levels were used. Moreover, two glucose oxidase and two glucose dehydrogenase based BGMs were evaluated at different altitudes on Mount Kilimanjaro. Accuracy criteria were set at a bias <15% from reference glucose (when >6.5 mmol/L) and <1 mmol/L from reference glucose (when <6.5 mmol/L). No significant difference was observed between measurements at simulated altitude and sea level for either glucose oxidase based BGMs or glucose dehydrogenase based BGMs as a group phenomenon. Two GDH based BGMs did not meet set performance criteria. Most BGMs are generally overestimating true glucose concentration at high altitude. Conclusion At simulated high altitude all tested BGMs, including glucose oxidase based BGMs, did not show influence of low atmospheric oxygen pressure. All BGMs, except for two GDH based BGMs, performed within predefined criteria. At true high altitude one GDH based BGM had best precision and accuracy. PMID:21103399

CBM Reading, Mathematics, and Written Expression at the Secondary Level: Examining Latent Composite Relations among Indices and Unique Predictions with a State Achievement Test

ERIC Educational Resources Information Center

Codding, Robin S.; Petscher, Yaacov; Truckenmiller, Adrea

2015-01-01

A paucity of research has examined the utility of curriculum-based measurement (CBM) for data-based decision making at the secondary level. As schools move to multitiered systems of service delivery, it is conceivable that multiple screening measures will be used that address various academic subject areas. The value of including different CBM…

Measurement with verification of stationary signals and noise in extremely quiet environments: Measuring below the noise floor

PubMed Central

Ellingson, Roger M.; Gallun, Frederick J.; Bock, Guillaume

2015-01-01

It can be problematic to measure stationary acoustic sound pressure level in any environment when the target level approaches or lies below the minimum measureable sound pressure level of the measurement system itself. This minimum measureable level, referred to as the inherent measurement system noise floor, is generally established by noise emission characteristics of measurement system components such as microphones, preamplifiers, and other system circuitry. In this paper, methods are presented and shown accurate measuring stationary levels within 20 dB above and below this system noise floor. Methodology includes (1) measuring inherent measurement system noise, (2) subtractive energy based, inherent noise adjustment of levels affected by system noise floor, and (3) verifying accuracy of inherent noise adjustment technique. While generalizable to other purposes, the techniques presented here were specifically developed to quantify ambient noise levels in very quiet rooms used to evaluate free-field human hearing thresholds. Results obtained applying the methods to objectively measure and verify the ambient noise level in an extremely quiet room, using various measurement system noise floors and analysis bandwidths, are presented and discussed. The verified results demonstrate the adjustment method can accurately extend measurement range to 20 dB below the measurement system noise floor, and how measurement system frequency bandwidth can affect accuracy of reported noise levels. PMID:25786932

A Simple and Easy Process for the Determination of Estimated Plasma Glucose Level in Patients Presenting to Hospital: An Example of Multicentric Data Mining.

PubMed

Serdar, Muhittin A; Koldaş, Macit; Serteser, Mustafa; Akın, Okhan; Sonmez, Cigdem; Gülbahar, Ozlem; Akbıyık, Filiz; Ünsal, Ibrahim

2016-12-01

The aim of the present study was to determine the relation between the simultaneous fasting plasma glucose level and HbA1c in a large population of patients presenting to the hospital, based on various measurement methods available for HbA1c. HbA1c levels of 162,210 patients presenting to various hospitals and laboratories were measured based on seven different systems, and at the same time, eAG levels were calculated based on HbA1c levels. The correlation coefficients (r) between serum plasma glucose and HbA1c levels were found to be 0.809, 0.774, 0.779, 0.817, 0.704, 0.796, and 0.747 in Bio-Rad Variant II, Tosoh G8, ADAMS A1c, Trinity Boronate Affinity, Chromsystems HPLC, Roche Tina-quant, and Abbott Architect, respectively. The concordance correlation coefficients between the eAG levels as calculated with the formulas provided in the text and the eAG levels as calculated according to NGSP directions (where eAG = (28.7*HbA1c) - 46.7) were found to be between 0.9339 and 0.9866. Despite the progress made for the standardization of HbA1c measurements, the relation between serum glucose and HbA1c still demonstrated certain discrepancies pertaining to the differences in measurement methodologies. As a conclusion, each laboratory could determine different eAG levels depending on the data originated by their individual analyzer. © 2016 Society for Laboratory Automation and Screening.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Zhiqi; He, Qing, E-mail: heqing@ise.neu.edu.cn; Xie, Zhi

For real-time and precise measurement of molten steel level in tundish during continuous casting, slag level and slag thickness are needed. Among which, the problem of slag thickness measurement has been solved in our previous work. In this paper, a systematic solution for slag level measurement based on laser triangulation is proposed. Being different from traditional laser triangulation, several aspects for measuring precision and robustness have been done. First, laser line is adopted for multi-position measurement to overcome the deficiency of single point laser range finder caused by the uneven surface of the slag. Second, the key parameters, such asmore » installing angle and minimum requirement of the laser power, are analyzed and determined based on the gray-body radiation theory to fulfill the rigorous requirement of measurement accuracy. Third, two kinds of severe noises in the acquired images, which are, respectively, caused by heat radiation and Electro-Magnetic Interference (EMI), are cleaned via morphological characteristic of the liquid slag and color difference between EMI and the laser signals, respectively. Fourth, as false target created by stationary slag usually disorders the measurement, valid signals of the slag are distinguished from the false ones to calculate the slag level. Then, molten steel level is obtained by the slag level minus the slag thickness. The measuring error of this solution is verified by the applications in steel plants, which is ±2.5 mm during steady casting and ±3.2 mm at the end of casting.« less

Oxidatively-induced DNA damage and base excision repair in euthymic patients with bipolar disorder.

PubMed

Ceylan, Deniz; Tuna, Gamze; Kirkali, Güldal; Tunca, Zeliha; Can, Güneş; Arat, Hidayet Ece; Kant, Melis; Dizdaroglu, Miral; Özerdem, Ayşegül

2018-05-01

Oxidatively-induced DNA damage has previously been associated with bipolar disorder. More recently, impairments in DNA repair mechanisms have also been reported. We aimed to investigate oxidatively-induced DNA lesions and expression of DNA glycosylases involved in base excision repair in euthymic patients with bipolar disorder compared to healthy individuals. DNA base lesions including both base and nucleoside modifications were measured using gas chromatography-tandem mass spectrometry and liquid chromatography-tandem mass spectrometry with isotope-dilution in DNA samples isolated from leukocytes of euthymic patients with bipolar disorder (n = 32) and healthy individuals (n = 51). The expression of DNA repair enzymes OGG1 and NEIL1 were measured using quantitative real-time polymerase chain reaction. The levels of malondialdehyde were measured using high performance liquid chromatography. Seven DNA base lesions in DNA of leukocytes of patients and healthy individuals were identified and quantified. Three of them had significantly elevated levels in bipolar patients when compared to healthy individuals. No elevation of lipid peroxidation marker malondialdehyde was observed. The level of OGG1 expression was significantly reduced in bipolar patients compared to healthy individuals, whereas the two groups exhibited similar levels of NEIL1 expression. Our results suggest that oxidatively-induced DNA damage occurs and base excision repair capacity may be decreased in bipolar patients when compared to healthy individuals. Measurement of oxidatively-induced DNA base lesions and the expression of DNA repair enzymes may be of great importance for large scale basic research and clinical studies of bipolar disorder. Copyright © 2018 Elsevier B.V. All rights reserved.

The Relationship among Measures of Written Expression Using Curriculum-Based Measurement and the Arizona Instrument to Measure Skills (AIMS) at the Middle School Level

ERIC Educational Resources Information Center

Lopez, Francesca A.; Thompson, Sandra S.

2011-01-01

The authors examined the predictor-criterion relationship between measures of written expression using spring curriculum-based measures (W-CBM) and the spring administration of the state-mandated high-stakes test the Arizona Instrument to Measure Standards (AIMS) in writing. Students (N = 83) in Grades 6, 7, and 8 wrote expressive narratives for 3…

Impact of geographic area level on measuring socioeconomic disparities in cancer survival in New South Wales, Australia: A period analysis.

PubMed

Stanbury, Julia F; Baade, Peter D; Yu, Yan; Yu, Xue Qin

2016-08-01

Area-based socioeconomic measures are widely used in health research. In theory, the larger the area used the more individual misclassification is introduced, thus biasing the association between such area level measures and health outcomes. In this study, we examined the socioeconomic disparities in cancer survival using two geographic area-based measures to see if the size of the area matters. We used population-based cancer registry data for patients diagnosed with one of 10 major cancers in New South Wales (NSW), Australia during 2004-2008. Patients were assigned index measures of socioeconomic status (SES) based on two area-level units, census Collection District (CD) and Local Government Area (LGA) of their address at diagnosis. Five-year relative survival was estimated using the period approach for patients alive during 2004-2008, for each socioeconomic quintile at each area-level for each cancer. Poisson-regression modelling was used to adjust for socioeconomic quintile, sex, age-group at diagnosis and disease stage at diagnosis. The relative excess risk of death (RER) by socioeconomic quintile derived from this modelling was compared between area-units. We found extensive disagreement in SES classification between CD and LGA levels across all socioeconomic quintiles, particularly for more disadvantaged groups. In general, more disadvantaged patients had significantly lower survival than the least disadvantaged group for both CD and LGA classifications. The socioeconomic survival disparities detected by CD classification were larger than those detected by LGA. Adjusted RER estimates by SES were similar for most cancers when measured at both area levels. We found that classifying patient SES by the widely used Australian geographic unit LGA results in underestimation of survival disparities for several cancers compared to when SES is classified at the geographically smaller CD level. Despite this, our RER of death estimates derived from these survival estimates were generally similar for both CD and LGA level analyses, suggesting that LGAs remain a valuable spatial unit for use in Australian health and social research, though the potential for misclassification must be considered when interpreting research. While data confidentiality concerns increase with the level of geographical precision, the use of smaller area-level health and census data in the future, with appropriate allowance for confidentiality. Copyright © 2016. Published by Elsevier Ltd.

Methods for automatic trigger threshold adjustment

DOEpatents

Welch, Benjamin J; Partridge, Michael E

2014-03-18

Methods are presented for adjusting trigger threshold values to compensate for drift in the quiescent level of a signal monitored for initiating a data recording event, thereby avoiding false triggering conditions. Initial threshold values are periodically adjusted by re-measuring the quiescent signal level, and adjusting the threshold values by an offset computation based upon the measured quiescent signal level drift. Re-computation of the trigger threshold values can be implemented on time based or counter based criteria. Additionally, a qualification width counter can be utilized to implement a requirement that a trigger threshold criterion be met a given number of times prior to initiating a data recording event, further reducing the possibility of a false triggering situation.

Statistical analysis of electromagnetic radiation measurements in the vicinity of GSM/UMTS base station antenna masts.

PubMed

Koprivica, Mladen; Neskovic, Natasa; Neskovic, Aleksandar; Paunovic, George

2014-01-01

As a result of dense installations of public mobile base station, additional electromagnetic radiation occurs in the living environment. In order to determine the level of radio-frequency radiation generated by base stations, extensive electromagnetic field strength measurements were carried out for 664 base station locations. Base station locations were classified into three categories: indoor, masts and locations with installations on buildings. Having in mind the large percentage (47 %) of sites with antenna masts, a detailed analysis of this location category was performed, and the measurement results were presented. It was concluded that the total electric field strength in the vicinity of base station antenna masts in no case exceeded 10 V m(-1), which is quite below the International Commission on Non-Ionizing Radiation Protection reference levels. At horizontal distances >50 m from the mast bottom, the median and maximum values were <1 and 2 V m(-1), respectively.

An Investigation into the Relationship Between Theory and Practical Biology at 'A' Level in Kenyan Secondary Schools. African Studies in Curriculum Development & Evaluation No. 100.

ERIC Educational Resources Information Center

Mutsune, Myra Kanaidza

Until 1982, achievement in A-level biology in Kenya was measured by an examination which consisted of four papers, three measuring theory work and one measuring practical skills. In 1982, a three paper examination was developed, the first two papers measuring theory and the third paper measuring practical skills. Based on the change in the test…

Dopants concentration effects on the wavelength shift of long-period fiber gratings used as liquid level detectors

NASA Astrophysics Data System (ADS)

Mao, Barerem-Melgueba; Zhou, Bin

2011-12-01

Two liquid level sensors based on different long-period fiber gratings are proposed and compared. The long-period gratings have the same characteristics (length, grating period) but are fabricated in different optical fibers (photosensitive B-Ge codoped optical fibers with different dopants concentrations). The principle of this type of sensor is based on the refractive index sensitivity of long-period fiber gratings. By monitoring the resonant wavelength shifts of a given attenuation band, one can measure the immersed lengths of long-period fiber gratings and then the liquid level. The levels of two different solutions are measured. The maximum shift (7.69 nm) of the investigated resonance wavelength was observed in LPG1 (fabricated in Fibercore PS1250/1500). By controlling the fiber dopants concentrations one can improve the readouts of a fiber-optic liquid level sensor based on long-period fiber gratings.

Research on coding and decoding method for digital levels.

PubMed

Tu, Li-fen; Zhong, Si-dong

2011-01-20

A new coding and decoding method for digital levels is proposed. It is based on an area-array CCD sensor and adopts mixed coding technology. By taking advantage of redundant information in a digital image signal, the contradiction that the field of view and image resolution restrict each other in a digital level measurement is overcome, and the geodetic leveling becomes easier. The experimental results demonstrate that the uncertainty of measurement is 1 mm when the measuring range is between 2 m and 100 m, which can meet practical needs.

Mobile Carbon Monoxide Monitoring System Based on Arduino-Matlab for Environmental Monitoring Application

NASA Astrophysics Data System (ADS)

Azieda Mohd Bakri, Nur; Junid, Syed Abdul Mutalib Al; Razak, Abdul Hadi Abdul; Idros, Mohd Faizul Md; Karimi Halim, Abdul

2015-11-01

Nowadays, the increasing level of carbon monoxide globally has become a serious environmental issue which has been highlighted in most of the country globally. The monitoring of carbon monoxide content is one of the approaches to identify the level of carbon monoxide pollution towards providing the solution for control the level of carbon monoxide produced. Thus, this paper proposed a mobile carbon monoxide monitoring system for measuring the carbon monoxide content based on Arduino-Matlab General User Interface (GUI). The objective of this project is to design, develop and implement the real-time mobile carbon monoxide sensor system and interfacing for measuring the level of carbon monoxide contamination in real environment. Four phases or stages of work have been carried out for the accomplishment of the project, which classified as sensor development, controlling and integrating sensor, data collection and data analysis. As a result, a complete design and developed system has been verified with the handheld industrial standard carbon monoxide sensor for calibrating the sensor sensitivity and measurement in the laboratory. Moreover, the system has been tested in real environments by measuring the level of carbon monoxide in three different lands used location; industrial area; residential area and main road (commercial area). In this real environment test, the industrial area recorded the highest reading with 71.23 ppm and 82.59 ppm for sensor 1 and sensor 2 respectively. As a conclusion, the mobile realtime carbon monoxide system based on the Arduino-Matlab is the best approach to measure the carbon monoxide concentration in different land-used since it does not require a manual data collection and reduce the complexity of the existing carbon monoxide level concentration measurement practise at the same time with a complete data analysis facilities.

The risk of misclassifying subjects within principal component based asset index

PubMed Central

2014-01-01

The asset index is often used as a measure of socioeconomic status in empirical research as an explanatory variable or to control confounding. Principal component analysis (PCA) is frequently used to create the asset index. We conducted a simulation study to explore how accurately the principal component based asset index reflects the study subjects’ actual poverty level, when the actual poverty level is generated by a simple factor analytic model. In the simulation study using the PC-based asset index, only 1% to 4% of subjects preserved their real position in a quintile scale of assets; between 44% to 82% of subjects were misclassified into the wrong asset quintile. If the PC-based asset index explained less than 30% of the total variance in the component variables, then we consistently observed more than 50% misclassification across quintiles of the index. The frequency of misclassification suggests that the PC-based asset index may not provide a valid measure of poverty level and should be used cautiously as a measure of socioeconomic status. PMID:24987446

A creatinine biosensor based on admittance measurement

NASA Astrophysics Data System (ADS)

Ching, Congo Tak-Shing; Sun, Tai-Ping; Jheng, Deng-Yun; Tsai, Hou-Wei; Shieh, Hsiu-Li

2015-08-01

Regular check of blood creatinine level is very important as it is a measurement of renal function. Therefore, the objective of this study is to develop a simple and reliable creatinine biosensor based on admittance measurement for precise determination of creatinine. The creatinine biosensor was fabricated with creatinine deiminase immobilized on screen-printed carbon electrodes. Admittance measurement at a specific frequency ranges (22.80 - 84.71 Hz) showed that the biosensor has an excellent linear (r2 > 0.95) response range (50 - 250 uM), which covers the normal physiological and pathological ranges of blood creatinine levels. Intraclass correlation coefficient (ICC) showed that the biosensor has excellent reliability and validity (ICC = 0.98). In conclusion, a simple and reliable creatinine biosensor was developed and it is capable of precisely determining blood creatinine levels in both the normal physiological and pathological ranges.

A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix F: Data base plots for SSME tests 750-120 through 750-200

NASA Technical Reports Server (NTRS)

Coffin, T.

1986-01-01

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is presented. The data base represents dynamic pressure measurements obtained during single engine hot firing tests of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is also included to estimate spectral trends with SSME power level.

Assessing animal welfare in sow herds using data on meat inspection, medication and mortality.

PubMed

Knage-Rasmussen, K M; Rousing, T; Sørensen, J T; Houe, H

2015-03-01

This paper aims to contribute to the development of a cost-effective alternative to expensive on-farm animal-based welfare assessment systems. The objective of the study was to design an animal welfare index based on central database information (DBWI), and to validate it against an animal welfare index based on-farm animal-based measurements (AWI). Data on 63 Danish sow herds with herd-sizes of 80 to 2500 sows and an average herd size of 501 were collected from three central databases containing: Meat inspection data collected at animal level in the abattoir, mortality data at herd level from the rendering plants of DAKA, and medicine records at both herd and animal group level (sow with piglets, weaners or finishers) from the central database Vetstat. Selected measurements taken from these central databases were used to construct the DBWI. The relative welfare impacts of both individual database measurements and the databases overall were assigned in consultation with a panel consisting of 12 experts. The experts were drawn from production advisory activities, animal science and in one case an animal welfare organization. The expert panel weighted each measurement on a scale from 1 (not-important) to 5 (very important). The experts also gave opinions on the relative weightings of measurements for each of the three databases by stating a relative weight of each database in the DBWI. On the basis of this, the aggregated DBWI was normalized. The aggregation of AWI was based on weighted summary of herd prevalence's of 20 clinical and behavioural measurements originating from a 1 day data collection. AWI did not show linear dependency of DBWI. This suggests that DBWI is not suited to replace an animal welfare index using on-farm animal-based measurements.

Deployment of quasi-digital sensor for high temperature molten salt level measurement in pyroprocessing plants.

PubMed

Sanga, Ramesh; Agarwal, Sourabh; Sivaramakrishna, M; Rao, G Prabhakara

2018-04-01

Development of a liquid molten salt level sensor device that can detect the level of liquid molten salt in the process vessels of pyrochemical reprocessing of spent metallic fuels is detailed. It is proposed to apply a resistive-type pulsating sensor-based level measurement approach. There are no commercially available sensors due to limitations of high temperature, radiation, and physical dimensions. A compact, simple, rugged, low power, and high precise pulsating sensor-based level probe and simple instrumentation for the molten salt liquid level sensor to work in the extreme conditions has been indigenously developed, with high precision and accuracy. The working principle, design concept, and results have been discussed. This level probe is mainly composed of the variable resistor made up of ceramic rods. This resistor constitutes the part of resistance-capacitance-type Logic Gate Oscillator (LGO). A change in the molten salt level inside the tank causes a small change in the resistance which in turn changes the pulse frequency of the LGO. Thus the frequency, the output of the instrument that is displayed on the LCD of an embedded system, is a function of molten salt level. In the present design, the range of level measurement is about 10 mm. The sensitivity in position measurement up to 10 mm is ∼2.5 kHz/mm.

Deployment of quasi-digital sensor for high temperature molten salt level measurement in pyroprocessing plants

NASA Astrophysics Data System (ADS)

Sanga, Ramesh; Agarwal, Sourabh; Sivaramakrishna, M.; Rao, G. Prabhakara

2018-04-01

Development of a liquid molten salt level sensor device that can detect the level of liquid molten salt in the process vessels of pyrochemical reprocessing of spent metallic fuels is detailed. It is proposed to apply a resistive-type pulsating sensor-based level measurement approach. There are no commercially available sensors due to limitations of high temperature, radiation, and physical dimensions. A compact, simple, rugged, low power, and high precise pulsating sensor-based level probe and simple instrumentation for the molten salt liquid level sensor to work in the extreme conditions has been indigenously developed, with high precision and accuracy. The working principle, design concept, and results have been discussed. This level probe is mainly composed of the variable resistor made up of ceramic rods. This resistor constitutes the part of resistance-capacitance-type Logic Gate Oscillator (LGO). A change in the molten salt level inside the tank causes a small change in the resistance which in turn changes the pulse frequency of the LGO. Thus the frequency, the output of the instrument that is displayed on the LCD of an embedded system, is a function of molten salt level. In the present design, the range of level measurement is about 10 mm. The sensitivity in position measurement up to 10 mm is ˜2.5 kHz/mm.

Study on application of adaptive fuzzy control and neural network in the automatic leveling system

NASA Astrophysics Data System (ADS)

Xu, Xiping; Zhao, Zizhao; Lan, Weiyong; Sha, Lei; Qian, Cheng

2015-04-01

This paper discusses the adaptive fuzzy control and neural network BP algorithm in large flat automatic leveling control system application. The purpose is to develop a measurement system with a flat quick leveling, Make the installation on the leveling system of measurement with tablet, to be able to achieve a level in precision measurement work quickly, improve the efficiency of the precision measurement. This paper focuses on the automatic leveling system analysis based on fuzzy controller, Use of the method of combining fuzzy controller and BP neural network, using BP algorithm improve the experience rules .Construct an adaptive fuzzy control system. Meanwhile the learning rate of the BP algorithm has also been run-rate adjusted to accelerate convergence. The simulation results show that the proposed control method can effectively improve the leveling precision of automatic leveling system and shorten the time of leveling.

Measures and predictors of varenicline adherence in the treatment of nicotine dependence.

PubMed

Peng, Annie R; Morales, Mark; Wileyto, E Paul; Hawk, Larry W; Cinciripini, Paul; George, Tony P; Benowitz, Neal L; Nollen, Nicole L; Lerman, Caryn; Tyndale, Rachel F; Schnoll, Robert

2017-12-01

While adherence to medication in smoking cessation clinical trials is strongly associated with clinical outcome, very few studies have evaluated the validity of pill count as a measure of adherence relative to a biological assay, and evaluated a broad range of correlates of adherence. In a smoking cessation clinical trial of varenicline, we compared pill counts collected over 4 different time periods to varenicline salivary levels taken after 2weeks of treatment, as well as evaluated predictors of adherence to varenicline. Using a binary measure of adherence based on salivary varenicline levels, adherence was higher among older, white, and more educated participants. Relative to 3, 7, and 14-day pill count, 12-week pill count was the only significant measure able to discriminate adherence as defined by salivary varenicline levels (assessed by area under the receiver operating characteristic curve; AUC=0.59, p=0.004). Seventy-two percent of participants who indicated adherence on 12-week pill count were classified as adherent based on varenicline saliva levels (sensitivity=0.80; specificity=0.40). There was modest variability in the relationship between 12-week pill count and varenicline levels across race and rate of nicotine metabolism. Lastly, General Estimating Equation models demonstrated that longitudinal changes in withdrawal, craving, negative and positive affect, and side effect count and severity were not related to adherence based on salivary varenicline levels. These results indicate that 12-week pill count was the best, albeit a relatively weak, measure of varenicline adherence; additional factors associated with treatment adherence need to be identified. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Influence of the Terrestrial Reference Frame on Studies of Sea Level Change

NASA Astrophysics Data System (ADS)

Nerem, R. S.; Bar-Sever, Y. E.; Haines, B. J.; Desai, S.; Heflin, M. B.

2015-12-01

The terrestrial reference frame (TRF) provides the foundation for the accurate monitoring of sea level using both ground-based (tide gauges) and space-based (satellite altimetry) techniques. For the latter, tide gauges are also used to monitor drifts in the satellite instruments over time. The accuracy of the terrestrial reference frame (TRF) is thus a critical component for both types of sea level measurements. The TRF is central to the formation of geocentric sea-surface height (SSH) measurements from satellite altimeter data. The computed satellite orbits are linked to a particular TRF via the assumed locations of the ground-based tracking systems. The manner in which TRF errors are expressed in the orbit solution (and thus SSH) is not straightforward, and depends on the models of the forces underlying the satellite's motion. We discuss this relationship, and provide examples of the systematic TRF-induced errors in the altimeter derived sea-level record. The TRF is also crucial to the interpretation of tide-gauge measurements, as it enables the separation of vertical land motion from volumetric changes in the water level. TRF errors affect tide gauge measurements through GNSS estimates of the vertical land motion at each tide gauge. This talk will discuss the current accuracy of the TRF and how errors in the TRF impact both satellite altimeter and tide gauge sea level measurements. We will also discuss simulations of how the proposed Geodetic Reference Antenna in SPace (GRASP) satellite mission could reduce these errors and revolutionize how reference frames are computed in general.

Item-Level and Construct Evaluation of Early Numeracy Curriculum-Based Measures

ERIC Educational Resources Information Center

Lee, Young-Sun; Lembke, Erica; Moore, Douglas; Ginsburg, Herbert P.; Pappas, Sandra

2012-01-01

The present study examined the technical adequacy of curriculum-based measures (CBMs) of early numeracy. Six 1-min early mathematics tasks were administered to 137 kindergarten and first-grade students, along with an omnibus test of early mathematics. The CBM measures included Count Out Loud, Quantity Discrimination, Number Identification, Missing…

Knowledge level of nurses in Jordan on ventilator-associated pneumonia and preventive measures.

PubMed

Hassan, Zeinab M; Wahsheh, Moayad A

2017-05-01

Ventilator-associated pneumonia is the most prevalent infection in Intensive Care Units, with the highest mortality rate; crude mortality rates may be as high as 20-75%. Many practices such as prevention measures (e.g. hand washing, wearing gloves, suctioning, elevated head of bed between 30° and 45°) have demonstrated an effect of reducing the incidence of this infection. To identify the level of nurses' knowledge of ventilator-associated pneumonia and prevention measures before an educational programme, identify the level of nurses' knowledge on ventilator-associated pneumonia and prevention post an educational programme and identify the reasons for not applying ventilator-associated pneumonia prevention measures among nurses in Jordan. Pre- and post-intervention observational study. Data based on a self-reported questionnaire from 428 nurses who worked in intensive care units were analysed. PowerPoint lectures, videos, printed materials and electronic materials were used in the intervention. Paired t-tests were used to test research questions. More than three-quarters of nurses had a low knowledge level regarding pathophysiology, risk factors and ventilator-associated pneumonia preventative measures. Nurses showed significant improvements in mean scores on the knowledge level of ventilator-associated pneumonia and prevention measures after an educational programme (p < 0.05). The main reasons for not applying prevention measures were the lack of time and no followed protocols in the units. Health education programmes about ventilator-associated pneumonia must be conducted among nurses in Jordan through continuous education. Hospital and nursing administrators should be actively involved in educational programmes and in assuring support for continuing education. Protocol for ventilator-associated pneumonia prevention should be developed based on current evidence-based guidelines. © 2016 British Association of Critical Care Nurses.

Transfer of learning and patient outcome in simulated crisis resource management: a systematic review.

PubMed

Boet, Sylvain; Bould, M Dylan; Fung, Lillia; Qosa, Haytham; Perrier, Laure; Tavares, Walter; Reeves, Scott; Tricco, Andrea C

2014-06-01

Simulation-based learning is increasingly used by healthcare professionals as a safe method to learn and practice non-technical skills, such as communication and leadership, required for effective crisis resource management (CRM). This systematic review was conducted to gain a better understanding of the impact of simulation-based CRM teaching on transfer of learning to the workplace and subsequent changes in patient outcomes. Studies on CRM, crisis management, crew resource management, teamwork, and simulation published up to September 2012 were searched in MEDLINE(®), EMBASE™, CINAHL, Cochrane Central Register of Controlled Trials, and ERIC. All studies that used simulation-based CRM teaching with outcomes measured at Kirkpatrick Level 3 (transfer of learning to the workplace) or 4 (patient outcome) were included. Studies measuring only learners' reactions or simple learning (Kirkpatrick Level 1 or 2, respectively) were excluded. Two authors independently reviewed all identified titles and abstracts for eligibility. Nine articles were identified as meeting the inclusion criteria. Four studies measured transfer of simulation-based CRM learning into the clinical setting (Kirkpatrick Level 3). In three of these studies, simulation-enhanced CRM training was found significantly more effective than no intervention or didactic teaching. Five studies measured patient outcomes (Kirkpatrick Level 4). Only one of these studies found that simulation-based CRM training made a clearly significant impact on patient mortality. Based on a small number of studies, this systematic review found that CRM skills learned at the simulation centre are transferred to clinical settings, and the acquired CRM skills may translate to improved patient outcomes, including a decrease in mortality.

Hollow optical-fiber based infrared spectroscopy for measurement of blood glucose level by using multi-reflection prism.

PubMed

Kino, Saiko; Omori, Suguru; Katagiri, Takashi; Matsuura, Yuji

2016-02-01

A mid-infrared attenuated total reflection (ATR) spectroscopy system employing hollow optical fibers and a trapezoidal multi-reflection ATR prism has been developed to measure blood glucose levels. Using a multi-reflection prism brought about higher sensitivity, and the flat and wide contact surface of the prism resulted in higher measurement reproducibility. An analysis of in vivo measurements of human inner lip mucosa revealed clear signatures of glucose in the difference spectra between ones taken during the fasting state and ones taken after ingestion of glucose solutions. A calibration plot based on the absorption peak at 1155 cm(-1) that originates from the pyranose ring structure of glucose gave measurement errors less than 20%.

Using satellite observations in performance evaluation for regulatory air quality modeling: Comparison with ground-level measurements

NASA Astrophysics Data System (ADS)

Odman, M. T.; Hu, Y.; Russell, A.; Chai, T.; Lee, P.; Shankar, U.; Boylan, J.

2012-12-01

Regulatory air quality modeling, such as State Implementation Plan (SIP) modeling, requires that model performance meets recommended criteria in the base-year simulations using period-specific, estimated emissions. The goal of the performance evaluation is to assure that the base-year modeling accurately captures the observed chemical reality of the lower troposphere. Any significant deficiencies found in the performance evaluation must be corrected before any base-case (with typical emissions) and future-year modeling is conducted. Corrections are usually made to model inputs such as emission-rate estimates or meteorology and/or to the air quality model itself, in modules that describe specific processes. Use of ground-level measurements that follow approved protocols is recommended for evaluating model performance. However, ground-level monitoring networks are spatially sparse, especially for particulate matter. Satellite retrievals of atmospheric chemical properties such as aerosol optical depth (AOD) provide spatial coverage that can compensate for the sparseness of ground-level measurements. Satellite retrievals can also help diagnose potential model or data problems in the upper troposphere. It is possible to achieve good model performance near the ground, but have, for example, erroneous sources or sinks in the upper troposphere that may result in misleading and unrealistic responses to emission reductions. Despite these advantages, satellite retrievals are rarely used in model performance evaluation, especially for regulatory modeling purposes, due to the high uncertainty in retrievals associated with various contaminations, for example by clouds. In this study, 2007 was selected as the base year for SIP modeling in the southeastern U.S. Performance of the Community Multiscale Air Quality (CMAQ) model, at a 12-km horizontal resolution, for this annual simulation is evaluated using both recommended ground-level measurements and non-traditional satellite retrievals. Evaluation results are assessed against recommended criteria and peer studies in the literature. Further analysis is conducted, based upon these assessments, to discover likely errors in model inputs and potential deficiencies in the model itself. Correlations as well as differences in input errors and model deficiencies revealed by ground-level measurements versus satellite observations are discussed. Additionally, sensitivity analyses are employed to investigate errors in emission-rate estimates using either ground-level measurements or satellite retrievals, and the results are compared against each other considering observational uncertainties. Recommendations are made for how to effectively utilize satellite retrievals in regulatory air quality modeling.

Effects of Home-Based Versus Clinic-Based Rehabilitation Combining Mirror Therapy and Task-Specific Training for Patients With Stroke: A Randomized Crossover Trial.

PubMed

Hsieh, Yu-Wei; Chang, Ku-Chou; Hung, Jen-Wen; Wu, Ching-Yi; Fu, Mu-Hui; Chen, Chih-Chi

2018-04-25

We investigated the treatment effects of a home-based rehabilitation program compared with clinic-based rehabilitation in patients with stroke. A single-blinded, 2-sequence, 2-period, crossover-designed study. Rehabilitation clinics and participant's home environment. Individuals with disabilities poststroke. During each intervention period, each participant received 12 training sessions, with a 4-week washout phase between the 2 periods. Participants were randomly allocated to home-based rehabilitation first or clinic-based rehabilitation first. Intervention protocols included mirror therapy and task-specific training. Outcome measures were selected based on the International Classification of Functioning, Disability and Health. Outcomes of impairment level were the Fugl-Meyer Assessment, Box and Block Test, and Revised Nottingham Sensory Assessment. Outcomes of activity and participation levels included the Motor Activity Log, 10-meter walk test, sit-to-stand test, Canadian Occupational Performance Measure, and EuroQoL-5D Questionnaire. Pretest analyses showed no significant evidence of carryover effect. Home-based rehabilitation resulted in significantly greater improvements on the Motor Activity Log amount of use subscale (P=.01) and the sit-to-stand test (P=.03) than clinic-based rehabilitation. The clinic-based rehabilitation group had better benefits on the health index measured by the EuroQoL-5D Questionnaire (P=.02) than the home-based rehabilitation group. Differences between the 2 groups on the other outcomes were not statistically significant. The home-based and clinic-based rehabilitation groups had comparable benefits in the outcomes of impairment level but showed differential effects in the outcomes of activity and participation levels. Copyright © 2018 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Measurement of Responsibility: A Critical Evaluation of Level of Work Measurement by Time-Span of Discretion.

ERIC Educational Resources Information Center

Laner, S.; And Others

This report is a critical evaluation based on extended field trials and theoretical analysis of the time-span technique of measuring level of work in organizational hierarchies. It is broadly concluded that the technique does possess many of the desirable features claimed by its originator, but that earlier, less highly structured versions based…

Measuring and assessing maintainability at the end of high level design

NASA Technical Reports Server (NTRS)

Briand, Lionel C.; Morasca, Sandro; Basili, Victor R.

1993-01-01

Software architecture appears to be one of the main factors affecting software maintainability. Therefore, in order to be able to predict and assess maintainability early in the development process we need to be able to measure the high-level design characteristics that affect the change process. To this end, we propose a measurement approach, which is based on precise assumptions derived from the change process, which is based on Object-Oriented Design principles and is partially language independent. We define metrics for cohesion, coupling, and visibility in order to capture the difficulty of isolating, understanding, designing and validating changes.

Development of a measure of informed choice suitable for use in low literacy populations.

PubMed

Dormandy, Elizabeth; Tsui, Elaine Y L; Marteau, Theresa M

2007-06-01

To assess the reliability and validity of a simplified questionnaire-based measure of informed choice in populations with low literacy. The measure comprises (a) knowledge about the test and (b) attitudes towards undergoing the test. Responses to (a) and (b) together with information on test uptake, are used to classify choices as informed or uninformed. A cross-sectional study of 79 pregnant women (46 women with higher, and 33 with lower education levels) completed a simplified questionnaire, a standardised questionnaire and a semi-structured interview about antenatal sickle cell and thalassaemia (SCT) screening. The measures used were: (a) informed choice, based on knowledge about the test, attitudes towards undergoing the test, and uptake of the test and (b) ease of completion measures. The simplified measures of knowledge and attitudes were able to distinguish between women classified according to interview responses as having good or poor knowledge (knowledge scores 6.8 versus 3.2, p<0.001), and positive or negative attitudes towards undergoing the test (attitude scores 20.6 versus 16.2, p=0.023). There was no difference in rates of informed choice derived from the simplified or standardised measures (54% versus 51%, 95% CI difference -11 to 19). Women with lower levels of education found the simplified questionnaire easier to complete than the standardised version (11.0 versus 9.6, p=0.009). Those with higher levels of education found no difference in ease of completion between the two versions of the questionnaire (11.8 versus 11.6, p=0.54). A simplified questionnaire-based measure of informed choice in antenatal SCT screening is as reliable and valid as a more complex standardised version and for those with less education, easier to complete. The simplified questionnaire-based measure of informed choice is suitable for use in populations with low and high levels of education.

Factorial Structure of the Family Values Scale from a Multilevel-Multicultural Perspective

ERIC Educational Resources Information Center

Byrne, Barbara M.; van de Vijver, Fons J. R.

2014-01-01

In cross-cultural research, there is a tendency for researchers to draw inferences at the country level based on individual-level data. Such action implicitly and often mistakenly assumes that both the measuring instrument and its underlying construct(s) are operating equivalently across both levels. Based on responses from 5,482 college students…

Self-perceived competency of infection control nurses based on Benner's framework: a nationwide survey in Korea.

PubMed

Kim, Kyung Mi; Choi, Jeong Sil

2015-05-01

The aim of this study was to evaluate the competency level of Korean infection control nurses (ICNs) by comparing the self-perceived competency level based on Benner's framework and the core competency proposed by the Certification Board of Infection Control. Study subjects included 90 ICNs working in Korean hospitals with more than 300 beds. A questionnaire was used to measure self-perceived competency level and core competency level. Using descriptive analysis, the core competency level of ICNs was found to differ significantly according to self-perceived competency level, and core competency level showed a significant increase with the increase of self-perceived competency level. Self-perceived competency level could be useful in classifying the competency level of nursing specialties. These results illustrate the competency levels of Korean ICNs and could serve as a reference to evaluate and expand the application of competency measurement not only for ICNs but also other groups of nurse specialists. Copyright © 2014 Elsevier Inc. All rights reserved.

Outsourcing in Higher Education: An Empirical Examination

ERIC Educational Resources Information Center

Gupta, Atul; Herath, S. Kanthi; Mikouiza, Nathalie C.

2005-01-01

Purpose: To measure the degree of implementation and satisfaction level with the outsourcing initiatives from higher education institutions. Design/methodology/approach: Uses a survey questionnaire to measure the levels of satisfaction with the institutions' services and the questionnaire was based on six factors that are deemed significant in…

Short-Term Estimates of Growth Using Curriculum-Based Measurement of Oral Reading Fluency: Estimating Standard Error of the Slope to Construct Confidence Intervals

ERIC Educational Resources Information Center

Christ, Theodore J.

2006-01-01

Curriculum-based measurement of oral reading fluency (CBM-R) is an established procedure used to index the level and trend of student growth. A substantial literature base exists regarding best practices in the administration and interpretation of CBM-R; however, research has yet to adequately address the potential influence of measurement error.…

The Diesel Exhaust in Miners Study: II. Exposure monitoring surveys and development of exposure groups.

PubMed

Coble, Joseph B; Stewart, Patricia A; Vermeulen, Roel; Yereb, Daniel; Stanevich, Rebecca; Blair, Aaron; Silverman, Debra T; Attfield, Michael

2010-10-01

Air monitoring surveys were conducted between 1998 and 2001 at seven non-metal mining facilities to assess exposure to respirable elemental carbon (REC), a component of diesel exhaust (DE), for an epidemiologic study of miners exposed to DE. Personal exposure measurements were taken on workers in a cross-section of jobs located underground and on the surface. Air samples taken to measure REC were also analyzed for respirable organic carbon (ROC). Concurrent measurements to assess exposure to nitric oxide (NO) and nitrogen dioxide (NO₂), two gaseous components of DE, were also taken. The REC measurements were used to develop quantitative estimates of average exposure levels by facility, department, and job title for the epidemiologic analysis. Each underground job was assigned to one of three sets of exposure groups from specific to general: (i) standardized job titles, (ii) groups of standardized job titles combined based on the percentage of time in the major underground areas, and (iii) larger groups based on similar area carbon monoxide (CO) air concentrations. Surface jobs were categorized based on their use of diesel equipment and proximity to DE. A total of 779 full-shift personal measurements were taken underground. The average REC exposure levels for underground jobs with five or more measurements ranged from 31 to 58 μg m⁻³ at the facility with the lowest average exposure levels and from 313 to 488 μg m⁻³ at the facility with the highest average exposure levels. The average REC exposure levels for surface workers ranged from 2 to 6 μg m⁻³ across the seven facilities. There was much less contrast in the ROC compared with REC exposure levels measured between surface and underground workers within each facility, as well as across the facilities. The average ROC levels underground ranged from 64 to 195 μg m⁻³, while on the surface, the average ROC levels ranged from 38 to 71 μg m⁻³ by facility, an ∼2- to 3-fold difference. The average NO and NO₂ levels underground ranged from 0.20 to 1.49 parts per million (ppm) and from 0.10 to 0.60 ppm, respectively, and were ∼10 times higher than levels on the surface, which ranged from 0.02 to 0.11 ppm and from 0.01 to 0.06 ppm, respectively. The ROC, NO, and NO₂ concentrations underground were correlated with the REC levels (r = 0.62, 0.71, and 0.62, respectively). A total of 80% of the underground jobs were assigned an exposure estimate based on measurements taken for the specific job title or for other jobs with a similar percentage of time spent in the major underground work areas. The average REC exposure levels by facility were from 15 to 64 times higher underground than on the surface. The large contrast in exposure levels measured underground versus on the surface, along with the differences between the mining facilities and between underground jobs within the facilities resulted in a wide distribution in the exposure estimates for evaluation of exposure-response relationships in the epidemiologic analyses.

The Diesel Exhaust in Miners Study: II. Exposure Monitoring Surveys and Development of Exposure Groups

PubMed Central

Coble, Joseph B.; Stewart, Patricia A.; Vermeulen, Roel; Yereb, Daniel; Stanevich, Rebecca; Blair, Aaron; Silverman, Debra T.; Attfield, Michael

2010-01-01

Air monitoring surveys were conducted between 1998 and 2001 at seven non-metal mining facilities to assess exposure to respirable elemental carbon (REC), a component of diesel exhaust (DE), for an epidemiologic study of miners exposed to DE. Personal exposure measurements were taken on workers in a cross-section of jobs located underground and on the surface. Air samples taken to measure REC were also analyzed for respirable organic carbon (ROC). Concurrent measurements to assess exposure to nitric oxide (NO) and nitrogen dioxide (NO2), two gaseous components of DE, were also taken. The REC measurements were used to develop quantitative estimates of average exposure levels by facility, department, and job title for the epidemiologic analysis. Each underground job was assigned to one of three sets of exposure groups from specific to general: (i) standardized job titles, (ii) groups of standardized job titles combined based on the percentage of time in the major underground areas, and (iii) larger groups based on similar area carbon monoxide (CO) air concentrations. Surface jobs were categorized based on their use of diesel equipment and proximity to DE. A total of 779 full-shift personal measurements were taken underground. The average REC exposure levels for underground jobs with five or more measurements ranged from 31 to 58 μg m−3 at the facility with the lowest average exposure levels and from 313 to 488 μg m−3 at the facility with the highest average exposure levels. The average REC exposure levels for surface workers ranged from 2 to 6 μg m−3 across the seven facilities. There was much less contrast in the ROC compared with REC exposure levels measured between surface and underground workers within each facility, as well as across the facilities. The average ROC levels underground ranged from 64 to 195 μg m−3, while on the surface, the average ROC levels ranged from 38 to 71 μg m−3 by facility, an ∼2- to 3-fold difference. The average NO and NO2 levels underground ranged from 0.20 to 1.49 parts per million (ppm) and from 0.10 to 0.60 ppm, respectively, and were ∼10 times higher than levels on the surface, which ranged from 0.02 to 0.11 ppm and from 0.01 to 0.06 ppm, respectively. The ROC, NO, and NO2 concentrations underground were correlated with the REC levels (r = 0.62, 0.71, and 0.62, respectively). A total of 80% of the underground jobs were assigned an exposure estimate based on measurements taken for the specific job title or for other jobs with a similar percentage of time spent in the major underground work areas. The average REC exposure levels by facility were from 15 to 64 times higher underground than on the surface. The large contrast in exposure levels measured underground versus on the surface, along with the differences between the mining facilities and between underground jobs within the facilities resulted in a wide distribution in the exposure estimates for evaluation of exposure–response relationships in the epidemiologic analyses. PMID:20876232

Experimental Energy Levels and Partition Function of the 12C2 Molecule

NASA Astrophysics Data System (ADS)

Furtenbacher, Tibor; Szabó, István; Császár, Attila G.; Bernath, Peter F.; Yurchenko, Sergei N.; Tennyson, Jonathan

2016-06-01

The carbon dimer, the 12C2 molecule, is ubiquitous in astronomical environments. Experimental-quality rovibronic energy levels are reported for 12C2, based on rovibronic transitions measured for and among its singlet, triplet, and quintet electronic states, reported in 42 publications. The determination utilizes the Measured Active Rotational-Vibrational Energy Levels (MARVEL) technique. The 23,343 transitions measured experimentally and validated within this study determine 5699 rovibronic energy levels, 1325, 4309, and 65 levels for the singlet, triplet, and quintet states investigated, respectively. The MARVEL analysis provides rovibronic energies for six singlet, six triplet, and two quintet electronic states. For example, the lowest measurable energy level of the {{a}}{}3{{{\\Pi }}}{{u}} state, corresponding to the J = 2 total angular momentum quantum number and the F 1 spin-multiplet component, is 603.817(5) cm-1. This well-determined energy difference should facilitate observations of singlet-triplet intercombination lines, which are thought to occur in the interstellar medium and comets. The large number of highly accurate and clearly labeled transitions that can be derived by combining MARVEL energy levels with computed temperature-dependent intensities should help a number of astrophysical observations as well as corresponding laboratory measurements. The experimental rovibronic energy levels, augmented, where needed, with ab initio variational ones based on empirically adjusted and spin-orbit coupled potential energy curves obtained using the Duo code, are used to obtain a highly accurate partition function, and related thermodynamic data, for 12C2 up to 4000 K.

Potentiometric Surface of the Aquia Aquifer in Southern Maryland, September 2007

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2009-01-01

This report presents a map showing the potentiometric surface of the Aquia aquifer in the Aquia Formation of Paleocene age in Southern Maryland during September 2007. The map is based on water-level measurements in 85 wells. The highest measured water level was 50 feet above sea level near the northern boundary and outcrop area of the aquifer in the central part of Anne Arundel County, and was below sea level just south of this area and in the remainder of the study area. The hydraulic gradient increased southeastward toward an extensive cone of depression around well fields at Lexington Park and Solomons Island. A water level measured west of the Cheasapeake Beach area has declined to 57 feet below sea level due to increased withdrawals. The lowest water level measured was 162 feet below sea level at the center of a cone of depression at Lexington Park.

Study of surface energy budget and test of a newly developed fast photoacoustic spectroscopy based hygrometer in field campaign Szeged (Hungary)

NASA Astrophysics Data System (ADS)

Tatrai, David; Nikov, Daniella; Zsolt Jász, Ervin; Bozóki, Zoltán; Szabó, Gábor; Weidinger, Tamás; András Gyöngyösi, Zénó; Kiss, Melinda; Józsa, János; Simó Diego, Gemma; Cuxart Rodamilans, Joan; Wrenger, Burkhart; Bottyán, Zsolt

2014-05-01

A micrometeorological field measurement campaign dedicated to study the surface energy budget and the structure of the boundary layer focusing on the transient layer forming periods during night-time was organized in the period of 10th of November to 3rd of December 2013 in the nearby of Szeged, Hungary. A temporary micrometeorological measurement station was set up at the coordinates N:46.239943; E:20.089758, approximately 1700 m far from a national meteorology station (N:46.255711; E:20.09052). In the experimental micrometeorological site different types of instruments were installed to measure numerous parameters: standard meteorological measurements (p, T, wet, wind speed and direction at three different levels, relative humidity at two levels and absolute humidity at one level) radiation budget components surface temperature and leaf wetness soil temperature, moisture and heat flux into the deeper soil layer eddy-covariance measurements (t, H, LE CO2) at 3 m level using Campbell open-path IRGA (EC150) system. At the national meteorology station (http://adatok.geo.u-szeged.hu/?lang=eng) besides their standard measurement equipment and measurement routine a SODAR was installed and continuously operated. These ground based measurements were combined with and supported by UAV, quadcopter and tethered balloon based vertical profile measurements of p, T, rh. For this measurement campaign as a modification of a previously developed airborne ready dual channel hygrometer, a fast photoacoustic spectroscopy based hygrometer was developed for absolute humidity measurements. The estimated response time of the system is faster than 15 Hz, which was achieved by the replacement of the data acquisition system and by recording the raw photoacoustic signal sampled at rate of 48 kHz for post-processing. During the campaign this new system was compared to a TDL system commercially available at Li-COR Inc. Besides the testing of the newly developed fast photoacoustic hygrometer the main goal of the present study is the determination of the total energy budget and the accuracy of its closure. Results and consequences of the measurements will be presented.

Modelling of occupational respirable crystalline silica exposure for quantitative exposure assessment in community-based case-control studies.

PubMed

Peters, Susan; Vermeulen, Roel; Portengen, Lützen; Olsson, Ann; Kendzia, Benjamin; Vincent, Raymond; Savary, Barbara; Lavoué, Jérôme; Cavallo, Domenico; Cattaneo, Andrea; Mirabelli, Dario; Plato, Nils; Fevotte, Joelle; Pesch, Beate; Brüning, Thomas; Straif, Kurt; Kromhout, Hans

2011-11-01

We describe an empirical model for exposure to respirable crystalline silica (RCS) to create a quantitative job-exposure matrix (JEM) for community-based studies. Personal measurements of exposure to RCS from Europe and Canada were obtained for exposure modelling. A mixed-effects model was elaborated, with region/country and job titles as random effect terms. The fixed effect terms included year of measurement, measurement strategy (representative or worst-case), sampling duration (minutes) and a priori exposure intensity rating for each job from an independently developed JEM (none, low, high). 23,640 personal RCS exposure measurements, covering a time period from 1976 to 2009, were available for modelling. The model indicated an overall downward time trend in RCS exposure levels of -6% per year. Exposure levels were higher in the UK and Canada, and lower in Northern Europe and Germany. Worst-case sampling was associated with higher reported exposure levels and an increase in sampling duration was associated with lower reported exposure levels. Highest predicted RCS exposure levels in the reference year (1998) were for chimney bricklayers (geometric mean 0.11 mg m(-3)), monument carvers and other stone cutters and carvers (0.10 mg m(-3)). The resulting model enables us to predict time-, job-, and region/country-specific exposure levels of RCS. These predictions will be used in the SYNERGY study, an ongoing pooled multinational community-based case-control study on lung cancer.

Potentiometric Surface of the Lower Patapsco Aquifer in Southern Maryland, September 2007

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2009-01-01

This report presents a map showing the potentiometric surface of the lower Patapsco aquifer in the Patapsco Formation of Early Cretaceous age in Southern Maryland during September 2007. The map is based on water-level measurements in 65 wells. The highest measured water level was 111 feet above sea level near the northwestern boundary and outcrop area of the aquifer in northern Prince George's County. From this area, the potentiometric surface declined towards well fields at Severndale and Arnold. The measured ground-water levels were 87 feet below sea level at Severndale, and 42 feet below sea level at Arnold. There was also a cone of depression covering a large area in Charles County that includes Waldorf, La Plata, Indian Head, and the Morgantown power plant. The ground-water levels measured were as low as 219 feet below sea level at Waldorf, 187 feet below sea level at La Plata, 106 feet below sea level at Indian Head, and 89 feet below sea level at the Morgantown power plant.

Anesthetic level prediction using a QCM based E-nose.

PubMed

Saraoğlu, H M; Ozmen, A; Ebeoğlu, M A

2008-06-01

Anesthetic level measurement is a real time process. This paper presents a new method to measure anesthesia level in surgery rooms at hospitals using a QCM based E-Nose. The E-Nose system contains an array of eight different coated QCM sensors. In this work, the best linear reacting sensor is selected from the array and used in the experiments. Then, the sensor response time was observed about 15 min using classic method, which is impractical for on-line anesthetic level detection during a surgery. Later, the sensor transition data is analyzed to reach a decision earlier than the classical method. As a result, it is found out that the slope of transition data gives valuable information to predict the anesthetic level. With this new method, we achieved to find correct anesthetic levels within 100 s.

Work Physiology Evaluation of Laundry Workers

NASA Astrophysics Data System (ADS)

Sari, A. D.; Suryoputro, M. R.; Pramaningtyas, M. D.; Putra, P. S.; Maulidyawati, S. B.

2016-01-01

This study aimed to assess cardiovascular strain during laundry operations in terms of physical workload, based on heart rate changes and level of pain complaints. Researchers measured resting and working heart rates and calculated cardiovascular load (%CVL), cardiovascular strain (%CVS), reserve heart rate (%RHR), energy expenditure, oxygen consumption, and measure level of pain complain in 6 laundry workers using Nordic Body Map questionnaire (NBM). Based on the result of %CVL and %CVS, the work in laundry was classified as acceptable level. Similarly, a high-level category was recorded for %RHR in moderate of energy expenditure. However, there are very pain level complain for hand using NBM questionnaire. Thus, there is a need to redesign the work content of equipment used and keep the physical workload in acceptable level, as this will increase their productivity and reduce their health risk.

Previous Estimates of Mitochondrial DNA Mutation Level Variance Did Not Account for Sampling Error: Comparing the mtDNA Genetic Bottleneck in Mice and Humans

PubMed Central

Wonnapinij, Passorn; Chinnery, Patrick F.; Samuels, David C.

2010-01-01

In cases of inherited pathogenic mitochondrial DNA (mtDNA) mutations, a mother and her offspring generally have large and seemingly random differences in the amount of mutated mtDNA that they carry. Comparisons of measured mtDNA mutation level variance values have become an important issue in determining the mechanisms that cause these large random shifts in mutation level. These variance measurements have been made with samples of quite modest size, which should be a source of concern because higher-order statistics, such as variance, are poorly estimated from small sample sizes. We have developed an analysis of the standard error of variance from a sample of size n, and we have defined error bars for variance measurements based on this standard error. We calculate variance error bars for several published sets of measurements of mtDNA mutation level variance and show how the addition of the error bars alters the interpretation of these experimental results. We compare variance measurements from human clinical data and from mouse models and show that the mutation level variance is clearly higher in the human data than it is in the mouse models at both the primary oocyte and offspring stages of inheritance. We discuss how the standard error of variance can be used in the design of experiments measuring mtDNA mutation level variance. Our results show that variance measurements based on fewer than 20 measurements are generally unreliable and ideally more than 50 measurements are required to reliably compare variances with less than a 2-fold difference. PMID:20362273

Using the Clinical Interview and Curriculum Based Measurement to Examine Risk Levels

ERIC Educational Resources Information Center

Ginsburg, Herbert P.; Lee, Young-Sun; Pappas, Sandra

2016-01-01

This paper investigates the power of the computer guided clinical interview (CI) and new curriculum based measurement (CBM) measures to identify and help children at risk of low mathematics achievement. We use data from large numbers of children in Kindergarten through Grade 3 to investigate the construct validity of CBM risk categories. The basic…

Perceived School Effectiveness: Case Study of a Liverpool College

ERIC Educational Resources Information Center

Samy, M.; Cook, K.

2009-01-01

Purpose: A quantitative effectiveness measurement based on the perceptions of the local community has been established as an effective mode of evaluating the level of satisfaction or perceived effectiveness of a school. In order to measure the level of effectiveness as perceived by their communities, educational institutions could use this…

Child-Level Predictors of Responsiveness to Evidence-Based Mathematics Intervention

ERIC Educational Resources Information Center

Powell, Sarah R.; Cirino, Paul T.; Malone, Amelia S.

2017-01-01

We identified child-level predictors of responsiveness to 2 types of mathematics intervention (calculation and word problem) among second-grade children with mathematics difficulty. Participants were 250 children in 107 classrooms in 23 schools pretested on mathematics and general cognitive measures and posttested on mathematics measures. We…

Reduction of image-based ADI-to-AEI overlay inconsistency with improved algorithm

NASA Astrophysics Data System (ADS)

Chen, Yen-Liang; Lin, Shu-Hong; Chen, Kai-Hsiung; Ke, Chih-Ming; Gau, Tsai-Sheng

2013-04-01

In image-based overlay (IBO) measurement, the measurement quality of various measurement spectra can be judged by quality indicators and also the ADI-to-AEI similarity to determine the optimum light spectrum. However we found some IBO measured results showing erroneous indication of wafer expansion from the difference between the ADI and the AEI maps, even after their measurement spectra were optimized. To reduce this inconsistency, an improved image calculation algorithm is proposed in this paper. Different gray levels composed of inner- and outer-box contours are extracted to calculate their ADI overlay errors. The symmetry of intensity distribution at the thresholds dictated by a range of gray levels is used to determine the particular gray level that can minimize the ADI-to-AEI overlay inconsistency. After this improvement, the ADI is more similar to AEI with less expansion difference. The same wafer was also checked by the diffraction-based overlay (DBO) tool to verify that there is no physical wafer expansion. When there is actual wafer expansion induced by large internal stress, both the IBO and the DBO measurements indicate similar expansion results. The scanning white-light interference microscope was used to check the variation of wafer warpage during the ADI and AEI stages. It predicts a similar trend with the overlay difference map, confirming the internal stress.

MARVEL analysis of the measured high-resolution rovibrational spectra of C2H2

NASA Astrophysics Data System (ADS)

Chubb, Katy L.; Joseph, Megan; Franklin, Jack; Choudhury, Naail; Furtenbacher, Tibor; Császár, Attila G.; Gaspard, Glenda; Oguoko, Patari; Kelly, Adam; Yurchenko, Sergei N.; Tennyson, Jonathan; Sousa-Silva, Clara

2018-01-01

Rotation-vibration energy levels are determined for the electronic ground state of the acetylene molecule, 12C2H2, using the Measured Active Rotational-Vibrational Energy Levels (MARVEL) technique. 37,813 measured transitions from 61 publications are considered. The distinct components of the spectroscopic network linking ortho and para states of the molecule are considered separately. The 20,717 ortho and 17,096 para transitions measured experimentally are used to determine 6013 ortho and 5200 para energy levels. The MARVEL results are compared with alternative compilations based on the use of effective Hamiltonians.

Radio-frequency electromagnetic field (RF-EMF) exposure levels in different European outdoor urban environments in comparison with regulatory limits.

PubMed

Urbinello, Damiano; Joseph, Wout; Huss, Anke; Verloock, Leen; Beekhuizen, Johan; Vermeulen, Roel; Martens, Luc; Röösli, Martin

2014-07-01

Concerns of the general public about potential adverse health effects caused by radio-frequency electromagnetic fields (RF-EMFs) led authorities to introduce precautionary exposure limits, which vary considerably between regions. It may be speculated that precautionary limits affect the base station network in a manner that mean population exposure unintentionally increases. The objectives of this multicentre study were to compare mean exposure levels in outdoor areas across four different European cities and to compare with regulatory RF-EMF exposure levels in the corresponding areas. We performed measurements in the cities of Amsterdam (the Netherlands, regulatory limits for mobile phone base station frequency bands: 41-61 V/m), Basel (Switzerland, 4-6 V/m), Ghent (Belgium, 3-4.5 V/m) and Brussels (Belgium, 2.9-4.3 V/m) using a portable measurement device. Measurements were conducted in three different types of outdoor areas (central and non-central residential areas and downtown), between 2011 and 2012 at 12 different days. On each day, measurements were taken every 4s for approximately 15 to 30 min per area. Measurements per urban environment were repeated 12 times during 1 year. Arithmetic mean values for mobile phone base station exposure ranged between 0.22 V/m (Basel) and 0.41 V/m (Amsterdam) in all outdoor areas combined. The 95th percentile for total RF-EMF exposure varied between 0.46 V/m (Basel) and 0.82 V/m (Amsterdam) and the 99th percentile between 0.81 V/m (Basel) and 1.20 V/m (Brussels). All exposure levels were far below international reference levels proposed by ICNIRP (International Commission on Non-Ionizing Radiation Protection). Our study did not find indications that lowering the regulatory limit results in higher mobile phone base station exposure levels. Copyright © 2014 Elsevier Ltd. All rights reserved.

SYNCHROTRON RADIATION, FREE ELECTRON LASER, APPLICATION OF NUCLEAR TECHNOLOGY, ETC.: Measurement of radiation dose at the north interaction point of BEPC II

NASA Astrophysics Data System (ADS)

Mo, Xiao-Hu; Zhang, Jian-Yong; Zhang, Tian-Bao; Zhang, Qing-Jiang; Achasov, Mikhail; Fu, Cheng-Dong; Muchnoi, Nikolay; Qin, Qing; Qu, Hua-Min; Wang, Yi-Fang; Wu, Jing-Min; Xu, Jin-Qiang; Yu, Bo-Xiang

2009-10-01

The technique details for measuring radiation dose are expounded. The results of gamma and neutron radiation levels are presented and the corresponding radiation shielding is discussed based on the simplified estimation. In addition, the photon radiation level move as background for future experiments is measured by a NaI(Tl) detector.

Household-Level Expenditure on Protective Measures Against Mosquitoes on the Island of La Réunion, France

PubMed Central

Thuilliez, Josselin; Bellia, Claire; Dehecq, Jean-Sébastien; Reilhes, Olivier

2014-01-01

Background For decades La Réunion has experienced a number of epidemics that have resulted in efforts to control the density of Aedes species on this Island. This study was conducted to assess household-level expenditure on protective measures against mosquito nuisance on the Island of La Réunion in 2012. Methodology/Principal Findings Data was collected during a cross-sectional survey of 1024 households and used to determine the relationship between the use of chemically-based protective measures and subjective and objective indicators of the density of Aedes albopictus. The average household expenditure in July 2012 was USD 9.86 and the total household-level expenditure over a one-year period was extrapolated to USD 28.05million (range: USD 25.58 million to USD 30.76 million). Much of this money was spent on measures thought to be relatively ineffective against Aedes mosquitoes. Expenditure on protective measures was not influenced by the level of knowledge on mosquitoes or by the visual nuisance they generated at home, but rather by the perception of risk related to a future epidemic of chikungunya and socioeconomic factors. Most importantly, household spending on protective measures was found to be influenced by a measure of zone-level mosquito density (the Breteau index), but not by objective indicators of the presence of mosquitoes within or around the house. Conclusions/Significance Household-level expenditure on chemically-based protective measures is high when compared to the investment made by public entities to achieve vector control, and it is differentially influenced by subjective and objective measures of mosquito density. The current situation could be improved, firstly by ensuring that the public is well-informed about mosquitoes and the effectiveness of various protective measures, and secondly by implementing interventions that could either complement current vector-control strategies and improve their effectiveness on a country-level, or that would steer the population toward the appropriate behaviours. PMID:24392170

Measurement of oxidative DNA damage by gas chromatography-mass spectrometry: ethanethiol prevents artifactual generation of oxidized DNA bases.

PubMed Central

Jenner, A; England, T G; Aruoma, O I; Halliwell, B

1998-01-01

Analysis of oxidative damage to DNA bases by GC-MS enables identification of a range of base oxidation products, but requires a derivatization procedure. However, derivatization at high temperature in the presence of air can cause 'artifactual' oxidation of some undamaged bases, leading to an overestimation of their oxidation products, including 8-hydroxyguanine. Therefore derivatization conditions that could minimize this problem were investigated. Decreasing derivatization temperature to 23 degrees C lowered levels of 8-hydroxyguanine, 8-hydroxyadenine, 5-hydroxycytosine and 5-(hydroxymethyl)uracil measured by GC-MS in hydrolysed calf thymus DNA. Addition of the reducing agent ethanethiol (5%, v/v) to DNA samples during trimethylsilylation at 90 degrees C also decreased levels of these four oxidized DNA bases as well as 5-hydroxyuracil. Removal of guanine from hydrolysed DNA samples by treatment with guanase, prior to derivatization, resulted in 8-hydroxyguanine levels (54-59 pmol/mg of DNA) that were significantly lower than samples not pretreated with guanase, independent of the derivatization conditions used. Only hydrolysed DNA samples that were derivatized at 23 degrees C in the presence of ethanethiol produced 8-hydroxyguanine levels (56+/-8 pmol/mg of DNA) that were as low as those of guanase-pretreated samples. Levels of other oxidized bases were similar to samples derivatized at 23 degrees C without ethanethiol, except for 5-hydroxycytosine and 5-hydroxyuracil, which were further decreased by ethanethiol. Levels of 8-hydroxyguanine, 8-hydroxyadenine and 5-hydroxycytosine measured in hydrolysed calf thymus DNA by the improved procedures described here were comparable with those reported previously by HPLC with electrochemical detection and by GC-MS with prepurification to remove undamaged base. We conclude that artifactual oxidation of DNA bases during derivatization can be prevented by decreasing the temperature to 23 degrees C, removing air from the derivatization reaction and adding ethanethiol. PMID:9531471

Children's exposure assessment of radiofrequency fields: Comparison between spot and personal measurements.

PubMed

Gallastegi, Mara; Huss, Anke; Santa-Marina, Loreto; Aurrekoetxea, Juan J; Guxens, Mònica; Birks, Laura Ellen; Ibarluzea, Jesús; Guerra, David; Röösli, Martin; Jiménez-Zabala, Ana

2018-05-24

Radiofrequency (RF) fields are widely used and, while it is still unknown whether children are more vulnerable to this type of exposure, it is essential to explore their level of exposure in order to conduct adequate epidemiological studies. Personal measurements provide individualized information, but they are costly in terms of time and resources, especially in large epidemiological studies. Other approaches, such as estimation of time-weighted averages (TWAs) based on spot measurements could simplify the work. The aims of this study were to assess RF exposure in the Spanish INMA birth cohort by spot measurements and by personal measurements in the settings where children tend to spend most of their time, i.e., homes, schools and parks; to identify the settings and sources that contribute most to that exposure; and to explore if exposure assessment based on spot measurements is a valid proxy for personal exposure. When children were 8 years old, spot measurements were conducted in the principal settings of 104 participants: homes (104), schools and their playgrounds (26) and parks (79). At the same time, personal measurements were taken for a subsample of 50 children during 3 days. Exposure assessment based on personal and on spot measurements were compared both in terms of mean exposures and in exposure-dependent categories by means of Bland-Altman plots, Cohen's kappa and McNemar test. Median exposure levels ranged from 29.73 (in children's bedrooms) to 200.10 μW/m 2 (in school playgrounds) for spot measurements and were higher outdoors than indoors. Median personal exposure was 52.13 μW/m 2 and median levels of assessments based on spot measurements ranged from 25.46 to 123.21 μW/m 2 . Based on spot measurements, the sources that contributed most to the exposure were FM radio, mobile phone downlink and Digital Video Broadcasting-Terrestrial, while indoor and personal sources contributed very little (altogether <20%). Similar distribution was observed with personal measurements. There was a bias proportional to power density between personal measurements and estimates based on spot measurements, with the latter providing higher exposure estimates. Nevertheless, there were no systematic differences between those methodologies when classifying subjects into exposure categories. Personal measurements of total RF exposure showed low to moderate agreement with home and bedroom spot measurements and agreed better, though moderately, with TWA based on spot measurements in the main settings where children spend time (homes, schools and parks; Kappa = 0.46). Exposure assessment based on spot measurements could be a feasible proxy to rank personal RF exposure in children population, providing that all relevant locations are being measured. Copyright © 2018. Published by Elsevier Ltd.

On the (In)Consistency of Citizen and Municipal Level Indicators of Social Capital and Local Government Performance

ERIC Educational Resources Information Center

Kampen, Jarl K.

2010-01-01

We study the empirical consistency of survey based (micro level) indicators of social capital and local government performance on the one, and municipality based (aggregate level) measures of these two concepts on the other hand. Knowledge about the behavior of these indicators is helpful for evaluating the value of studies carried out in isolated…

A statistical framework for protein quantitation in bottom-up MS-based proteomics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karpievitch, Yuliya; Stanley, Jeffrey R.; Taverner, Thomas

2009-08-15

ABSTRACT Motivation: Quantitative mass spectrometry-based proteomics requires protein-level estimates and confidence measures. Challenges include the presence of low-quality or incorrectly identified peptides and widespread, informative, missing data. Furthermore, models are required for rolling peptide-level information up to the protein level. Results: We present a statistical model for protein abundance in terms of peptide peak intensities, applicable to both label-based and label-free quantitation experiments. The model allows for both random and censoring missingness mechanisms and provides naturally for protein-level estimates and confidence measures. The model is also used to derive automated filtering and imputation routines. Three LC-MS datasets are used tomore » illustrate the methods. Availability: The software has been made available in the open-source proteomics platform DAnTE (Polpitiya et al. (2008)) (http://omics.pnl.gov/software/). Contact: adabney@stat.tamu.edu« less

Ensembles of satellite aerosol retrievals based on three AATSR algorithms within aerosol_cci

NASA Astrophysics Data System (ADS)

Kosmale, Miriam; Popp, Thomas

2016-04-01

Ensemble techniques are widely used in the modelling community, combining different modelling results in order to reduce uncertainties. This approach could be also adapted to satellite measurements. Aerosol_cci is an ESA funded project, where most of the European aerosol retrieval groups work together. The different algorithms are homogenized as far as it makes sense, but remain essentially different. Datasets are compared with ground based measurements and between each other. Three AATSR algorithms (Swansea university aerosol retrieval, ADV aerosol retrieval by FMI and Oxford aerosol retrieval ORAC) provide within this project 17 year global aerosol records. Each of these algorithms provides also uncertainty information on pixel level. Within the presented work, an ensembles of the three AATSR algorithms is performed. The advantage over each single algorithm is the higher spatial coverage due to more measurement pixels per gridbox. A validation to ground based AERONET measurements shows still a good correlation of the ensemble, compared to the single algorithms. Annual mean maps show the global aerosol distribution, based on a combination of the three aerosol algorithms. In addition, pixel level uncertainties of each algorithm are used for weighting the contributions, in order to reduce the uncertainty of the ensemble. Results of different versions of the ensembles for aerosol optical depth will be presented and discussed. The results are validated against ground based AERONET measurements. A higher spatial coverage on daily basis allows better results in annual mean maps. The benefit of using pixel level uncertainties is analysed.

Bayesian Correlation Analysis for Sequence Count Data

PubMed Central

Lau, Nelson; Perkins, Theodore J.

2016-01-01

Evaluating the similarity of different measured variables is a fundamental task of statistics, and a key part of many bioinformatics algorithms. Here we propose a Bayesian scheme for estimating the correlation between different entities’ measurements based on high-throughput sequencing data. These entities could be different genes or miRNAs whose expression is measured by RNA-seq, different transcription factors or histone marks whose expression is measured by ChIP-seq, or even combinations of different types of entities. Our Bayesian formulation accounts for both measured signal levels and uncertainty in those levels, due to varying sequencing depth in different experiments and to varying absolute levels of individual entities, both of which affect the precision of the measurements. In comparison with a traditional Pearson correlation analysis, we show that our Bayesian correlation analysis retains high correlations when measurement confidence is high, but suppresses correlations when measurement confidence is low—especially for entities with low signal levels. In addition, we consider the influence of priors on the Bayesian correlation estimate. Perhaps surprisingly, we show that naive, uniform priors on entities’ signal levels can lead to highly biased correlation estimates, particularly when different experiments have widely varying sequencing depths. However, we propose two alternative priors that provably mitigate this problem. We also prove that, like traditional Pearson correlation, our Bayesian correlation calculation constitutes a kernel in the machine learning sense, and thus can be used as a similarity measure in any kernel-based machine learning algorithm. We demonstrate our approach on two RNA-seq datasets and one miRNA-seq dataset. PMID:27701449

Hydrogel-based electrochemical sensor for non-invasive and continuous glucose monitoring

NASA Astrophysics Data System (ADS)

Park, Habeen; Lee, Ji-Young; Kim, Dong-Chul; Koh, Younggook; Cha, Junhoe

2017-07-01

Monitoring blood glucose level of diabetic patients is crucial in diabetes care from life threating complications. Selfmonitoring blood glucose (SMBG) that involves finger prick to draw blood samples into the measurement system is a widely-used method of routine measurement of blood glucose levels to date. SMBG includes, however, unavoidable pain problems resulting from the repetitive measurements. We hereby present a hydrogel-based electrochemical (H-EC) sensor to monitor the glucose level, non-invasively. Glucose oxidase (GOx) was immobilized in the disc-type hydroxyethyl methacrylate (HEMA) based hydrogel and kept intact in the hydrogel. Fast electron transfer mediated by Prussian blue (PB, hexacyanoferrate) generated efficient signal amplifications to facilitate the detection of the extracted glucose from the interstitial fluid. The linear response and the selectivity against glucose of the H-EC sensor were validated by chronoamperometry. For the practical use, the outcomes from the correlation of the extracted glucose concentration and the blood glucose value by on-body extraction, as well as the validation of the hydrogel-based electrochemical (H-EC) device, were applied to the on-body glucose monitoring.

Differences between seven measures of self-reported numbers of clients of female sex workers in southern India: implications for individual- and population-level analysis.

PubMed

Deering, Kathleen N; Vickerman, P; Pickles, M; Moses, S; Blanchard, J F; Ramesh, B M; Isac, S; Boily, M-C

2013-02-01

Quantifying sexual activity of sub-populations with high-risk sexual behaviour is important in understanding HIV epidemiology. This study examined inconsistency of seven outcomes measuring self-reported clients per month (CPM) of female sex workers (FSWs) in southern India and implications for individual/population-level analysis. Multivariate negative binomial regression was used to compare key social/environmental factors associated with each outcome. A transmission dynamics model was used to assess the impact of differences between outcomes on population-level FSW/client HIV prevalence. Outcomes based on 'clients per last working day' produced lower estimates than those based on 'clients per typical day'. Although the outcomes were strongly correlated, their averages differed by approximately two-fold (range 39.0-79.1 CPM). The CPM measure chosen did not greatly influence standard epidemiological 'risk factor' analysis. Differences across outcomes influenced HIV prevalence predictions. Due to this uncertainty, we recommend basing population-based estimates on the range of outcomes, particularly when assessing the impact of interventions.

Measurements of the populations of metastable and resonance levels in the plasma of an RF capacitive discharge in argon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vasilieva, A. N.; Voloshin, D. G.; Kovalev, A. S., E-mail: kovalev@dnph.phys.msu.su

2015-05-15

The behavior of the populations of two metastable and two lower resonance levels of argon atoms in the plasma of an RF capacitive discharge was studied. The populations were measured by two methods: the method of emission self-absorption and the method based on measurements of the intensity ratios of spectral lines. It is shown that the populations of resonance levels increase with increasing power deposited in the discharge, whereas the populations of metastable levels is independent of the RF power. The distribution of the populations over energy levels is not equilibrium under these conditions. The population kinetics of argon atomicmore » levels in the discharge plasma is simulated numerically. The distribution function of plasma electrons recovered from the measured populations of atomic levels and numerical simulations is found to be non-Maxwellian.« less

Combining Probability Distributions of Wind Waves and Sea Level Variations to Assess Return Periods of Coastal Floods

NASA Astrophysics Data System (ADS)

Leijala, U.; Bjorkqvist, J. V.; Pellikka, H.; Johansson, M. M.; Kahma, K. K.

2017-12-01

Predicting the behaviour of the joint effect of sea level and wind waves is of great significance due to the major impact of flooding events in densely populated coastal regions. As mean sea level rises, the effect of sea level variations accompanied by the waves will be even more harmful in the future. The main challenge when evaluating the effect of waves and sea level variations is that long time series of both variables rarely exist. Wave statistics are also highly location-dependent, thus requiring wave buoy measurements and/or high-resolution wave modelling. As an initial approximation of the joint effect, the variables may be treated as independent random variables, to achieve the probability distribution of their sum. We present results of a case study based on three probability distributions: 1) wave run-up constructed from individual wave buoy measurements, 2) short-term sea level variability based on tide gauge data, and 3) mean sea level projections based on up-to-date regional scenarios. The wave measurements were conducted during 2012-2014 on the coast of city of Helsinki located in the Gulf of Finland in the Baltic Sea. The short-term sea level distribution contains the last 30 years (1986-2015) of hourly data from Helsinki tide gauge, and the mean sea level projections are scenarios adjusted for the Gulf of Finland. Additionally, we present a sensitivity test based on six different theoretical wave height distributions representing different wave behaviour in relation to sea level variations. As these wave distributions are merged with one common sea level distribution, we can study how the different shapes of the wave height distribution affect the distribution of the sum, and which one of the components is dominating under different wave conditions. As an outcome of the method, we obtain a probability distribution of the maximum elevation of the continuous water mass, which enables a flexible tool for evaluating different risk levels in the current and future climate.

A detailed transcript-level probe annotation reveals alternative splicing based microarray platform differences

PubMed Central

Lee, Joseph C; Stiles, David; Lu, Jun; Cam, Margaret C

2007-01-01

Background Microarrays are a popular tool used in experiments to measure gene expression levels. Improving the reproducibility of microarray results produced by different chips from various manufacturers is important to create comparable and combinable experimental results. Alternative splicing has been cited as a possible cause of differences in expression measurements across platforms, though no study to this point has been conducted to show its influence in cross-platform differences. Results Using probe sequence data, a new microarray probe/transcript annotation was created based on the AceView Aug05 release that allowed for the categorization of genes based on their expression measurements' susceptibility to alternative splicing differences across microarray platforms. Examining gene expression data from multiple platforms in light of the new categorization, genes unsusceptible to alternative splicing differences showed higher signal agreement than those genes most susceptible to alternative splicing differences. The analysis gave rise to a different probe-level visualization method that can highlight probe differences according to transcript specificity. Conclusion The results highlight the need for detailed probe annotation at the transcriptome level. The presence of alternative splicing within a given sample can affect gene expression measurements and is a contributing factor to overall technical differences across platforms. PMID:17708771

Evidence-Based Biosafety: a Review of the Principles and Effectiveness of Microbiological Containment Measures

PubMed Central

Kimman, Tjeerd G.; Smit, Eric; Klein, Michèl R.

2008-01-01

We examined the available evidence on the effectiveness of measures aimed at protecting humans and the environment against the risks of working with genetically modified microorganisms (GMOs) and with non-GMO pathogenic microorganisms. A few principles and methods underlie the current biosafety practice: risk assessment, biological containment, concentration and enclosure, exposure minimization, physical containment, and hazard minimization. Many of the current practices are based on experience and expert judgment. The effectiveness of biosafety measures may be evaluated at the level of single containment equipment items and procedures, at the level of the laboratory as a whole, or at the clinical-epidemiological level. Data on the containment effectiveness of equipment and laboratories are scarce and fragmented. Laboratory-acquired infections (LAIs) are therefore important for evaluating the effectiveness of biosafety. For the majority of LAIs there appears to be no direct cause, suggesting that failures of biosafety were not noticed or that containment may have been insufficient. The number of reported laboratory accidents associated with GMOs is substantially lower than that of those associated with non-GMOs. It is unknown to what extent specific measures contribute to the overall level of biosafety. We therefore recommend that the evidence base of biosafety practice be strengthened. PMID:18625678

Evidence-based biosafety: a review of the principles and effectiveness of microbiological containment measures.

PubMed

Kimman, Tjeerd G; Smit, Eric; Klein, Michèl R

2008-07-01

We examined the available evidence on the effectiveness of measures aimed at protecting humans and the environment against the risks of working with genetically modified microorganisms (GMOs) and with non-GMO pathogenic microorganisms. A few principles and methods underlie the current biosafety practice: risk assessment, biological containment, concentration and enclosure, exposure minimization, physical containment, and hazard minimization. Many of the current practices are based on experience and expert judgment. The effectiveness of biosafety measures may be evaluated at the level of single containment equipment items and procedures, at the level of the laboratory as a whole, or at the clinical-epidemiological level. Data on the containment effectiveness of equipment and laboratories are scarce and fragmented. Laboratory-acquired infections (LAIs) are therefore important for evaluating the effectiveness of biosafety. For the majority of LAIs there appears to be no direct cause, suggesting that failures of biosafety were not noticed or that containment may have been insufficient. The number of reported laboratory accidents associated with GMOs is substantially lower than that of those associated with non-GMOs. It is unknown to what extent specific measures contribute to the overall level of biosafety. We therefore recommend that the evidence base of biosafety practice be strengthened.

Background noise analysis in urban airport surroundings of Brazilian cities, Congonhas Airport, São Paulo

PubMed Central

Scatolini, Fabio; Alves, Cláudio Jorge Pinto

2016-01-01

ABSTRACT OBJECTIVE To perform a quantitative analysis of the background noise at Congonhas Airport surroundings based on large sampling and measurements with no interruption. METHODS Measuring sites were chosen from 62 and 72 DNL (day-night-level) noise contours, in urban sites compatible with residential use. Fifteen sites were monitored for at least 168 hours without interruption or seven consecutive days. Data compilation was based on cross-reference between noise measurements and air traffic control records, and results were validated by airport meteorological reports. Preliminary diagnoses were established using the standard NBR-13368. Background noise values were calculated based on the Sound Exposure Level (SEL). Statistic parameters were calculated in one-hour intervals. RESULTS Only four of the fifteen sites assessed presented aircraft operations as a clear cause for the noise annoyance. Even so, it is possible to detect background noise levels above regulation limits during periods of low airport activity or when it closes at night. CONCLUSIONS All the sites monitored showed background noise levels above regulation limits between 7:00 and 21:00. In the intervals between 6:00-6:59 and 21:00-22:59 the noise data, when analyzed with the current airport operational characteristics, still allow the development of additional mitigating measures. PMID:28099658

Project Clarion: Three Years of Science Instruction in Title I Schools among K-Third Grade Students

NASA Astrophysics Data System (ADS)

Kim, Kyung Hee; VanTassel-Baska, Joyce; Bracken, Bruce A.; Feng, Annie; Stambaugh, Tamra; Bland, Lori

2012-10-01

The purpose of the study was to measure the effects of higher level, inquiry-based science curricula on students at primary level in Title I schools. Approximately 3,300 K-3 students from six schools were assigned to experimental or control classes ( N = 115 total) on a random basis according to class. Experimental students were exposed to concept-based science curriculum that emphasized `deep learning' though concept mastery and investigation, whereas control classes learned science from traditional school-based curricula. Two ability measures, the Bracken Basic Concept Scale-Revised (BBCS-R, Bracken 1998) and the Naglieri Nonverbal Intelligence Test (NNAT, Naglieri 1991), were used for baseline information. Additionally, a standardized measure of student achievement in science (the MAT-8 science subtest), a standardized measure of critical thinking, and a measure for observing teachers' classroom behaviors were used to assess learning outcomes. Results indicated that all ability groups of students benefited from the science inquiry-based approach to learning that emphasized science concepts, and that there was a positive achievement effect for low socio-economic young children who were exposed to such a curriculum.

A geographical information system-based analysis of cancer mortality and population exposure to coal mining activities in West Virginia, United States of America.

PubMed

Hendryx, Michael; Fedorko, Evan; Anesetti-Rothermel, Andrew

2010-05-01

Cancer incidence and mortality rates are high in West Virginia compared to the rest of the United States of America. Previous research has suggested that exposure to activities of the coal mining industry may contribute to elevated cancer mortality, although exposure measures have been limited. This study tests alternative specifications of exposure to mining activity to determine whether a measure based on location of mines, processing plants, coal slurry impoundments and underground slurry injection sites relative to population levels is superior to a previously-reported measure of exposure based on tons mined at the county level, in the prediction of age-adjusted cancer mortality rates. To this end, we utilize two geographical information system (GIS) techniques--exploratory spatial data analysis and inverse distance mapping--to construct new statistical analyses. Total, respiratory and "other" age-adjusted cancer mortality rates in West Virginia were found to be more highly associated with the GIS-exposure measure than the tonnage measure, before and after statistical control for smoking rates. The superior performance of the GIS measure, based on where people in the state live relative to mining activity, suggests that activities of the industry contribute to cancer mortality. Further confirmation of observed phenomena is necessary with person-level studies, but the results add to the body of evidence that coal mining poses environmental risks to population health in West Virginia.

Nanoparticle filtration performance of NIOSH-certified particulate air-purifying filtering facepiece respirators: evaluation by light scattering photometric and particle number-based test methods.

PubMed

Rengasamy, Samy; Eimer, Benjamin C

2012-01-01

National Institute for Occupational Safety and Health (NIOSH) certification test methods employ charge neutralized NaCl or dioctyl phthalate (DOP) aerosols to measure filter penetration levels of air-purifying particulate respirators photometrically using a TSI 8130 automated filter tester at 85 L/min. A previous study in our laboratory found that widely different filter penetration levels were measured for nanoparticles depending on whether a particle number (count)-based detector or a photometric detector was used. The purpose of this study was to better understand the influence of key test parameters, including filter media type, challenge aerosol size range, and detector system. Initial penetration levels for 17 models of NIOSH-approved N-, R-, and P-series filtering facepiece respirators were measured using the TSI 8130 photometric method and compared with the particle number-based penetration (obtained using two ultrafine condensation particle counters) for the same challenge aerosols generated by the TSI 8130. In general, the penetration obtained by the photometric method was less than the penetration obtained with the number-based method. Filter penetration was also measured for ambient room aerosols. Penetration measured by the TSI 8130 photometric method was lower than the number-based ambient aerosol penetration values. Number-based monodisperse NaCl aerosol penetration measurements showed that the most penetrating particle size was in the 50 nm range for all respirator models tested, with the exception of one model at ~200 nm size. Respirator models containing electrostatic filter media also showed lower penetration values with the TSI 8130 photometric method than the number-based penetration obtained for the most penetrating monodisperse particles. Results suggest that to provide a more challenging respirator filter test method than what is currently used for respirators containing electrostatic media, the test method should utilize a sufficient number of particles <100 nm and a count (particle number)-based detector.

Proposed Application of Fast Fourier Transform in Near Infra Red Based Non Invasive Blood Glucose Monitoring System

NASA Astrophysics Data System (ADS)

Jenie, R. P.; Iskandar, J.; Kurniawan, A.; Rustami, E.; Syafutra, H.; Nurdin, N. M.; Handoyo, T.; Prabowo, J.; Febryarto, R.; Rahayu, M. S. K.; Damayanthi, E.; Rimbawan; Sukandar, D.; Suryana, Y.; Irzaman; Alatas, H.

2017-03-01

Worldwide emergence of glycaemic status related health disorders, such as diabetes and metabolic syndrome, is growing in alarming rate. The objective was to propose new methods for non invasive blood glucose level measurement system, based on implementation of Fast Fourier Transform methods. This was an initial-lab-scale-research. Data on non invasive blood glucose measurement are referred from Scopus, Medline, and Google Scholar, from 2011 until 2016, and was used as design references, combined with in house verification. System was developed in modular fashion, based on aforementioned compiled references. Several preliminary tests to understand relationship between LED and photo-diode responses have been done. Several references were used as non invasive blood glucose measurement tools design basis. Solution is developed in modular fashion. we have proven different sensor responses to water and glucose. Human test for non invasive blood glucose level measurement system is needed.

Validation of cystatin C-based equations for evaluating residual renal function in patients on continuous ambulatory peritoneal dialysis.

PubMed

Zhong, Hui; Zhang, Wei; Qin, Min; Gou, ZhongPing; Feng, Ping

2017-06-01

Residual renal function needs to be assessed frequently in patients on continuous ambulatory peritoneal dialysis (CAPD). A commonly used method is to measure creatinine (Cr) and urea clearance in urine collected over 24 h, but collection can be cumbersome and difficult to manage. A faster, simpler alternative is to measure levels of cystatin C (CysC) in serum, but the accuracy and reliability of this method is controversial. Our study aims to validate published CysC-based equations for estimating residual renal function in patients on CAPD. Residual renal function was measured by calculating average clearance of urea and Cr in 24-h urine as well as by applying CysC- or Cr-based equations published by Hoek and Yang. We then compared the performance of the equations against the 24-h urine results. In our sample of 255 patients ages 47.9 ± 15.6 years, the serum CysC level was 6.43 ± 1.13 mg/L. Serum CysC level was not significantly associated with age, gender, height, weight, body mass index, hemoglobin, intact parathyroid hormone, normalized protein catabolic rate or the presence of diabetes. In contrast, serum CysC levels did correlate with peritoneal clearance of CysC and with levels of prealbumin and high-sensitivity C-reactive protein. Residual renal function was 2.56 ± 2.07 mL/min/1.73 m 2 based on 24-h urine sampling, compared with estimates (mL/min/1.73 m 2 ) of 2.98 ± 0.66 for Hoek's equation, 2.03 ± 0.97 for Yang's CysC-based equation and 2.70 ± 1.30 for Yang's Cr-based equation. Accuracies within 30%/50% of measured residual renal function for the three equations were 29.02/48.24, 34.90/56.86 and 31.37/54.90. The three equations for estimating residual renal function showed similar limits of agreement and differed significantly from the measured value. Published CysC-based equations do not appear to be particularly reliable for patients on CAPD. Further development and validation of CysC-based equations should take into account peritoneal clearance of CysC and other relevant factors. © The Author 2016. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Associations between Internet-based patient ratings and conventional surveys of patient experience in the English NHS: an observational study.

PubMed

Greaves, Felix; Pape, Utz J; King, Dominic; Darzi, Ara; Majeed, Azeem; Wachter, Robert M; Millett, Christopher

2012-07-01

Unsolicited web-based comments by patients regarding their healthcare are increasing, but controversial. The relationship between such online patient reports and conventional measures of patient experience (obtained via survey) is not known. The authors examined hospital level associations between web-based patient ratings on the National Health Service (NHS) Choices website, introduced in England during 2008, and paper-based survey measures of patient experience. The authors also aimed to compare these two methods of measuring patient experience. The authors performed a cross-sectional observational study of all (n=146) acute general NHS hospital trusts in England using data from 9997 patient web-based ratings posted on the NHS Choices website during 2009/2010. Hospital trust level indicators of patient experience from a paper-based survey (five measures) were compared with web-based patient ratings using Spearman's rank correlation coefficient. The authors compared the strength of associations among clinical outcomes, patient experience survey results and NHS Choices ratings. Web-based ratings of patient experience were associated with ratings derived from a national paper-based patient survey (Spearman ρ=0.31-0.49, p<0.001 for all). Associations with clinical outcomes were at least as strong for online ratings as for traditional survey measures of patient experience. Unsolicited web-based patient ratings of their care, though potentially prone to many biases, are correlated with survey measures of patient experience. They may be useful tools for patients when choosing healthcare providers and for clinicians to improve the quality of their services.

Potentiometric Surface of the Magothy Aquifer in Southern Maryland, September 2007

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2009-01-01

This report presents a map showing the potentiometric surface of the Magothy aquifer in the Magothy Formation of Late Cretaceous age in Southern Maryland during September 2007. The map is based on water-level measurements in 69 wells. The highest measured water level was 85 feet above sea level near the northern boundary and outcrop area of the aquifer in the north-central part of Anne Arundel County. The potentiometric surface declined towards the south. Local gradients were directed toward the center of a cone of depression in the Waldorf area that developed in response to pumping. Measured ground-water levels were as low as 90 feet below sea level in the Waldorf area.

The Relationship among State Laws, District Policies, and Elementary School-Based Measurement of Children's Body Mass Index

ERIC Educational Resources Information Center

Sandoval, Anna; Turner, Lindsey; Nicholson, Lisa; Chriqui, Jamie; Tortorelli, Megan; Chaloupka, Frank J.

2012-01-01

Background: School-based measurement of children's body mass index (BMI) is a useful tool for tracking childhood obesity rates, and may be an effective intervention strategy for reducing the increasing trends in obesity. This article examines the relationship between state law, district policy, and school-level BMI measurement practices.…

Evaluating the benefits of collaboration in simulation games: the case of health care.

PubMed

Leung, Ricky

2014-01-28

Organizations have used simulation games for health promotion and communication. To evaluate how simulation games can foster collaboration among stakeholders, this paper develops two social network measures. The paper aims to initiate two specific measures that facilitate organizations and researchers to evaluate the effectiveness of Web-based simulation games in fostering collaboration. The two measures are: (1) network density and (2) network diversity. They measure the level of connectedness and communication evenness within social networks. To illustrate how these measures may be used, a hypothetical game about health policy is outlined. Web-based games can serve as an effective platform to engage stakeholders because interaction among them is quite convenient. Yet, systematic evaluation and planning are necessary to realize the benefits of these games. The paper suggests directions for testing how the social network dimension of Web-based games can augment individual-level benefits that stakeholders can obtain from playing simulation games. While this paper focuses on measuring the structural properties of social networks in Web-based games, further research should focus more attention on the appropriateness of game contents. In addition, empirical research should cover different geographical areas, such as East Asian countries where video games are very popular.

Using Performance Measures to Allocate Consumable Funding

DTIC Science & Technology

2007-06-01

The Air Force is now using the Customer Oriented Leveling Technique (COLT) to determine levels for consumable items at its bases. COLT is an...Overview • COLT is a system to set AF retail stock levels for DLA-managed consumable parts to minimize expected customer wait time (ECWT) • COLT...changed please list both.) Original title on 712 A/B: Using Performance Measures to Allocate Consumable Funding If the title was revised

Brand differences of free‐base nicotine delivery in cigarette smoke: the view of the tobacco industry documents

PubMed Central

Wayne, G Ferris; Connolly, G N; Henningfield, J E

2006-01-01

The recent availability of internal tobacco industry documents provides significant insight into industry knowledge and manipulation of tobacco smoke delivery. One critical area of research is the role of smoke chemistry in determining the absorption and effects of smoke constituents, especially harm producing or pharmacologically active compounds. Independent scientific research has suggested that the nicotine dosing characteristics, hence the addiction potential of cigarettes, may be determined in part by the amount of free‐base nicotine in cigarette smoke and its effects on the location, route, and speed of absorption in the body and on the sensory perception effects of the inhaled smoke. Tobacco industry documents describe the use of a number of methods internally for measuring free‐base nicotine delivery. These include the common use of cigarette “smoke pH” as a means to estimate the fraction of free‐base nicotine in the particulate matter (PM) in cigarette smoke, as well as efforts to measure free‐base nicotine directly. Although these methods do not provide accurate absolute measures of free‐base nicotine in smoke, consistencies observed in the findings across the various manufacturers indicate: (1) real relative differences in the acid/base chemistry of the smoke from different brands of cigarettes; (2) a connection between differences in free‐base levels and brand‐dependent differences in sensory perception and smoke “impact”; and (3) levels of free‐base nicotine that are greater than have typically been publicly discussed by the industry. Furthermore, the results of these methods are generally consistent with those of a recent study from the Centers for Disease Control and Prevention which directly measured the free‐base fraction of nicotine across a range of cigarette types. Consideration of the likely fundamental importance of free‐base nicotine levels in cigarette smoke, together with the efforts discussed in the tobacco industry documents to measure such levels, indicates that the public health community would benefit from additional research to assess directly the delivery of free‐base nicotine in cigarette smoke across brands. This may be especially useful for those products (“light”, “ultralight”, “reduced carcinogen”, etc) that have been promoted, either explicitly or implicitly, as “harm reducing”. PMID:16728749

Development and assessment of a fiber-optic liquid level sensor with long-period fiber grating and Shewhart control charts

NASA Astrophysics Data System (ADS)

Wang, Jian-Neng; Jan, Chen-Han; Tang, Jaw-Luen; Wu, Wei-Te; Chen, Der-Cheng; Chen, Chien-Hsing; Syu, Jial-Yan; Luo, Ching-Ying

2011-12-01

This paper presents the development and assessment of a liquid level sensor using long-period fiber grating (LPFG) technology and Shewhart control charts. The 22-mm LPFGs were fabricated with the point-by-point CO2 laser engraving method. This sensor was designed in such a way that it could be moved up and down with a position controller. The experimental section covered LPFG position sensing test, liquid level detection capacity and reliability measurements, and sensing resolution evaluation. LPFG position sensing test was studied and confirmed by the resonance wavelength shifts which were significantly generated when 75% of the LPFG was immersed in water. There were ten groups of different liquid level capacity testing and each group underwent ten repeated measurements. Based on Shewhart control charts including an X-bar chart, s chart, and R chart, the results showed all measurands within the upper and lower control limits. This sensor was reliable and the liquid level could be measured at least 1000 mm. The transmission loss versus the percent of immersion of the LPFG sensor for water and green tea was used to study the sensing resolution. The findings show the LPFG-based liquid sensor had at least 1000-mm level measurement capacity and about 2-mm resolution.

Survey of RF exposure levels from mobile telephone base stations in Australia.

PubMed

Henderson, S I; Bangay, M J

2006-01-01

This paper reports the results of an exposure level survey of radiofrequency electromagnetic energy originating from mobile telephone base station antennas. Measurements of CDMA800, GSM900, GSM1800, and 3G(UMTS) signals were performed at distances ranging over 50 to 500 m from 60 base stations in five Australian cities. The exposure levels from these mobile telecommunications base stations were found to be well below the general public exposure limits of the ICNIRP guidelines and the Australian radiofrequency standard (ARPANSA RPS3). The highest recorded level from a single base station was 7.8 x 10(-3) W/m(2), which translates to 0.2% of the general public exposure limit.

Disposal and Reuse of Eaker Air Force Base, Arkansas. Final Environmental Impact Statement

DTIC Science & Technology

1992-11-01

Battalion Headquarters Office of Correspondence Carole Sunner, Director Office of the Governor Richard McClure, Chief of Staff Parks and Tourism ... ommunicate . The levels mentioned above refer to noise levels measured indoors, The "same noises measured outdoors would be 15 to 25 d8 higher than

Measurement of Ecological Dissonance with Bases of Power.

ERIC Educational Resources Information Center

Lin, Shang-Ping

This study examined a new measure of ecological dissonance (ED), whether different degrees of ED existed within levels of a university's power hierarchy, the relationship between ED and worker morale as a function of administrative power levels, and ED theory. Ninety-four faculty members at Mississippi State University completed the Index of Power…

Psycho-Pedagogical Measuring Bases of Educational Competences of Students

ERIC Educational Resources Information Center

Kenzhegaliev, Kulush K.; Shayakhmetova, Aisulu A.; Zulkarnayeva, Zhamila A.; Iksatova, Balzhan K.; Shonova, Bakytgul A.

2016-01-01

The relevance of the research problem is conditioned by the weak development of measurement, assessment of educational competences at an operational level, at the level of actions, by insufficient applications of psycho-pedagogical theories and methods of mathematical statistics. The aim of the work is to develop through teaching experiments the…

Measuring Knowledge Elaboration Based on a Computer-Assisted Knowledge Map Analytical Approach to Collaborative Learning

ERIC Educational Resources Information Center

Zheng, Lanqin; Huang, Ronghuai; Hwang, Gwo-Jen; Yang, Kaicheng

2015-01-01

The purpose of this study is to quantitatively measure the level of knowledge elaboration and explore the relationships between prior knowledge of a group, group performance, and knowledge elaboration in collaborative learning. Two experiments were conducted to investigate the level of knowledge elaboration. The collaborative learning objective in…

Service profiling and outcomes benchmarking using the CORE-OM: toward practice-based evidence in the psychological therapies. Clinical Outcomes in Routine Evaluation-Outcome Measures.

PubMed

Barkham, M; Margison, F; Leach, C; Lucock, M; Mellor-Clark, J; Evans, C; Benson, L; Connell, J; Audin, K; McGrath, G

2001-04-01

To complement the evidence-based practice paradigm, the authors argued for a core outcome measure to provide practice-based evidence for the psychological therapies. Utility requires instruments that are acceptable scientifically, as well as to service users, and a coordinated implementation of the measure at a national level. The development of the Clinical Outcomes in Routine Evaluation-Outcome Measure (CORE-OM) is summarized. Data are presented across 39 secondary-care services (n = 2,710) and within an intensively evaluated single service (n = 1,455). Results suggest that the CORE-OM is a valid and reliable measure for multiple settings and is acceptable to users and clinicians as well as policy makers. Baseline data levels of patient presenting problem severity, including risk, are reported in addition to outcome benchmarks that use the concept of reliable and clinically significant change. Basic quality improvement in outcomes for a single service is considered.

Estimation of pyrethroid pesticide intake using regression ...

EPA Pesticide Factsheets

Population-based estimates of pesticide intake are needed to characterize exposure for particular demographic groups based on their dietary behaviors. Regression modeling performed on measurements of selected pesticides in composited duplicate diet samples allowed (1) estimation of pesticide intakes for a defined demographic community, and (2) comparison of dietary pesticide intakes between the composite and individual samples. Extant databases were useful for assigning individual samples to composites, but they could not provide the breadth of information needed to facilitate measurable levels in every composite. Composite sample measurements were found to be good predictors of pyrethroid pesticide levels in their individual sample constituents where sufficient measurements are available above the method detection limit. Statistical inference shows little evidence of differences between individual and composite measurements and suggests that regression modeling of food groups based on composite dietary samples may provide an effective tool for estimating dietary pesticide intake for a defined population. The research presented in the journal article will improve community's ability to determine exposures through the dietary route with a less burdensome and costly method.

Gap probability - Measurements and models of a pecan orchard

NASA Technical Reports Server (NTRS)

Strahler, Alan H.; Li, Xiaowen; Moody, Aaron; Liu, YI

1992-01-01

Measurements and models are compared for gap probability in a pecan orchard. Measurements are based on panoramic photographs of 50* by 135 view angle made under the canopy looking upwards at regular positions along transects between orchard trees. The gap probability model is driven by geometric parameters at two levels-crown and leaf. Crown level parameters include the shape of the crown envelope and spacing of crowns; leaf level parameters include leaf size and shape, leaf area index, and leaf angle, all as functions of canopy position.

The Okinawa study: an estimation of noise-induced hearing loss on the basis of the records of aircraft noise exposure around Kadena Air Base

NASA Astrophysics Data System (ADS)

Hiramatsu, K.; Matsui, T.; Ito, A.; Miyakita, T.; Osada, Y.; Yamamoto, T.

2004-10-01

Aircraft noise measurements were recorded at the residential areas in the vicinity of Kadena Air Base, Okinawa in 1968 and 1972 at the time of the Vietnam war. The estimated equivalent continuous A-weighted sound pressure level LAeq for 24 h was 85 dB.The time history of sound level during 24 h was estimated from the measurement conducted in 1968, and the sound level was converted into the spectrum level at the centre frequency of the critical band of temporary threshold shift (TTS) using the results of spectrum analysis of aircraft noise operated at the airfield. With the information of spectrum level and its time history, TTS was calculated as a function of time and level change. The permanent threshold shift was also calculated by means of Robinson's method and ISO's method. The results indicate the noise exposure around Kadena Air Base was hazardous to hearing and is likely to have caused hearing loss to people living in its vicinity.

A Critical Look at Entropy-Based Gene-Gene Interaction Measures.

PubMed

Lee, Woojoo; Sjölander, Arvid; Pawitan, Yudi

2016-07-01

Several entropy-based measures for detecting gene-gene interaction have been proposed recently. It has been argued that the entropy-based measures are preferred because entropy can better capture the nonlinear relationships between genotypes and traits, so they can be useful to detect gene-gene interactions for complex diseases. These suggested measures look reasonable at intuitive level, but so far there has been no detailed characterization of the interactions captured by them. Here we study analytically the properties of some entropy-based measures for detecting gene-gene interactions in detail. The relationship between interactions captured by the entropy-based measures and those of logistic regression models is clarified. In general we find that the entropy-based measures can suffer from a lack of specificity in terms of target parameters, i.e., they can detect uninteresting signals as interactions. Numerical studies are carried out to confirm theoretical findings. © 2016 WILEY PERIODICALS, INC.

A video-angiometer for simultaneous and continuous measurement of inner and outer vessel diameters. Technical report.

PubMed

Assmann, R; Henrich, H

1978-09-29

A system is described for continuously measuring vessel diameters. It bases on the evaluation of video signal differences of a video camera which are induced by light intensity differences (grey levels) caused by the vascular wall structures. The system is electronically linear, automatically measuring and in addition eyeball controlled by the human sensor: the inaccuracy does not exceed the 5% level.

Sustainability of quality improvement following removal of pay-for-performance incentives.

PubMed

Benzer, Justin K; Young, Gary J; Burgess, James F; Baker, Errol; Mohr, David C; Charns, Martin P; Kaboli, Peter J

2014-01-01

Although pay-for-performance (P4P) has become a central strategy for improving quality in US healthcare, questions persist about the effectiveness of these programs. A key question is whether quality improvement that occurs as a result of P4P programs is sustainable, particularly if incentives are removed. To investigate sustainability of performance levels following removal of performance-based incentives. Observational cohort study that capitalized on a P4P program within the Veterans Health Administration (VA) that included adoption and subsequent removal of performance-based incentives for selected inpatient quality measures. The study sample comprised 128 acute care VA hospitals where performance was assessed between 2004 and 2010. VA system managers set annual performance goals in consultation with clinical leaders, and report performance scores to medical centers on a quarterly basis. These scores inform performance-based incentives for facilities and their managers. Bonuses are distributed based on the attainment of these performance goals. Seven quality of care measures for acute coronary syndrome, heart failure, and pneumonia linked to performance-based incentives. Significant improvements in performance were observed for six of seven quality of care measures following adoption of performance-based incentives and were maintained up to the removal of the incentive; subsequently, the observed performance levels were sustained. This is a quasi-experimental study without a comparison group; causal conclusions are limited. The maintenance of performance levels after removal of a performance-based incentive has implications for the implementation of Medicare's value-based purchasing initiative and other P4P programs. Additional research is needed to better understand human and system-level factors that mediate sustainability of performance-based incentives.

Direct Detection Doppler Lidar for Spaceborne Wind Measurement

NASA Technical Reports Server (NTRS)

Korb, C. Laurence; Flesia, Cristina

1999-01-01

The theory of double edge lidar techniques for measuring the atmospheric wind using aerosol and molecular backscatter is described. Two high spectral resolution filters with opposite slopes are located about the laser frequency for the aerosol based measurement or in the wings of the Rayleigh - Brillouin profile for the molecular measurement. This doubles the signal change per unit Doppler shift and improves the measurement accuracy by nearly a factor of 2 relative to the single edge technique. For the aerosol based measurement, the use of two high resolution edge filters reduces the effects of background, Rayleigh scattering, by as much as an order of magnitude and substantially improves the measurement accuracy. Also, we describe a method that allows the Rayleigh and aerosol components of the signal to be independently determined. A measurement accuracy of 1.2 m/s can be obtained for a signal level of 1000 detected photons which corresponds to signal levels in the boundary layer. For the molecular based measurement, we describe the use of a crossover region where the sensitivity of a molecular and aerosol-based measurement are equal. This desensitizes the molecular measurement to the effects of aerosol scattering and greatly simplifies the measurement. Simulations using a conical scanning spaceborne lidar at 355 nm give an accuracy of 2-3 m/s for altitudes of 2-15 km for a 1 km vertical resolution, a satellite altitude of 400 km, and a 200 km x 200 km spatial.

Potentiometric Surface of the Patuxent Aquifer in Southern Maryland, September 2007

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2009-01-01

This report presents a map showing the potentiometric surface of the Patuxent aquifer in the Patuxent Formation of Early Cretaceous age in Southern Maryland during September 2007. The map is based on water-level measurements in 41 wells. The highest measured water level was 165 feet above sea level near the northwestern boundary and in the outcrop area of the aquifer in northern Prince George's County. From this area, the potentiometric surface declined south towards well fields at Glen Burnie, Bryans Road, the Morgantown power plant, and the Chalk Point power plant. The measured ground-water levels were 81 feet below sea level at Glen Burnie, 47 feet below sea level southwest of Bryans Road, 27 feet below sea level at the Morgantown power plant, and 24 feet below sea level at the Chalk Point power plant.

When students can choose easy, medium, or hard homework problems

NASA Astrophysics Data System (ADS)

Teodorescu, Raluca E.; Seaton, Daniel T.; Cardamone, Caroline N.; Rayyan, Saif; Abbott, Jonathan E.; Barrantes, Analia; Pawl, Andrew; Pritchard, David E.

2012-02-01

We investigate student-chosen, multi-level homework in our Integrated Learning Environment for Mechanics [1] built using the LON-CAPA [2] open-source learning system. Multi-level refers to problems categorized as easy, medium, and hard. Problem levels were determined a priori based on the knowledge needed to solve them [3]. We analyze these problems using three measures: time-per-problem, LON-CAPA difficulty, and item difficulty measured by item response theory. Our analysis of student behavior in this environment suggests that time-per-problem is strongly dependent on problem category, unlike either score-based measures. We also found trends in student choice of problems, overall effort, and efficiency across the student population. Allowing students choice in problem solving seems to improve their motivation; 70% of students worked additional problems for which no credit was given.

Mapping the Relationships among Basic Facts, Concepts and Application, and Common Core Curriculum-Based Mathematics Measures

ERIC Educational Resources Information Center

Codding, Robin S.; Mercer, Sterett; Connell, James; Fiorello, Catherine; Kleinert, Whitney

2016-01-01

There is a paucity of evidence supporting the use of curriculum-based mathematics measures (M-CBMs) at the middle school level, which makes data-based decisions challenging for school professionals. The purpose of this study was to examine the relationships among three existing M-CBM indices: (a) basic facts, (b) concepts/application, and (c)…

Organizational readiness for implementing change: a psychometric assessment of a new measure.

PubMed

Shea, Christopher M; Jacobs, Sara R; Esserman, Denise A; Bruce, Kerry; Weiner, Bryan J

2014-01-10

Organizational readiness for change in healthcare settings is an important factor in successful implementation of new policies, programs, and practices. However, research on the topic is hindered by the absence of a brief, reliable, and valid measure. Until such a measure is developed, we cannot advance scientific knowledge about readiness or provide evidence-based guidance to organizational leaders about how to increase readiness. This article presents results of a psychometric assessment of a new measure called Organizational Readiness for Implementing Change (ORIC), which we developed based on Weiner's theory of organizational readiness for change. We conducted four studies to assess the psychometric properties of ORIC. In study one, we assessed the content adequacy of the new measure using quantitative methods. In study two, we examined the measure's factor structure and reliability in a laboratory simulation. In study three, we assessed the reliability and validity of an organization-level measure of readiness based on aggregated individual-level data from study two. In study four, we conducted a small field study utilizing the same analytic methods as in study three. Content adequacy assessment indicated that the items developed to measure change commitment and change efficacy reflected the theoretical content of these two facets of organizational readiness and distinguished the facets from hypothesized determinants of readiness. Exploratory and confirmatory factor analysis in the lab and field studies revealed two correlated factors, as expected, with good model fit and high item loadings. Reliability analysis in the lab and field studies showed high inter-item consistency for the resulting individual-level scales for change commitment and change efficacy. Inter-rater reliability and inter-rater agreement statistics supported the aggregation of individual level readiness perceptions to the organizational level of analysis. This article provides evidence in support of the ORIC measure. We believe this measure will enable testing of theories about determinants and consequences of organizational readiness and, ultimately, assist healthcare leaders to reduce the number of health organization change efforts that do not achieve desired benefits. Although ORIC shows promise, further assessment is needed to test for convergent, discriminant, and predictive validity.

A Follow-Up Web-Based Survey: Test and Measurement Expert Opinions on the Psychometric Properties of Out-of-Level Tests. Out-of-Level Testing Report.

ERIC Educational Resources Information Center

Bielinski, John; Minnema, Jane; Thurlow, Martha

A Web-based survey of 25 experts in testing theory and large-scale assessment examined the utility of out-of-level testing for making decisions about students and schools. Survey respondents were given a series of scenarios and asked to judge the degree to which out-of-level testing would affect the reliability and validity of test scores within…

A low-cost microcontroller-based system to monitor crop temperature and water status

USDA-ARS?s Scientific Manuscript database

A prototype microcontroller-based system was developed to automate the measurement and recording of soil-moisture status and canopy-, air-, and soil-temperature levels in cropped fields. Measurements of these conditions within the cropping system are often used to assess plant stress, and can assis...

Potentiometric Surface of the Aquia Aquifer in Southern Maryland, September 2002

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Wheeler, Judith C.

2003-01-01

This report presents a map showing the potentiometric surface of the Aquia aquifer in the Aquia Formation of Paleocene age in Southern Maryland during September 2002. The map is based on water-level measurements in 94 wells. The highest measured water level was 38 feet above sea level near the northern boundary and outcrop area of the aquifer in the central part of Anne Arundel County, and was below sea level just south of this area and in the remainder of the study area. The hydraulic gradient increased southeastward toward an extensive cone of depression around well fields at Lexington Park and Solomons Island. Another cone of depression occurred in northern Calvert County due to pumpage at and near Chesapeake Beach and North Beach. The water level measured in this area has declined to 55 feet below sea level. The lowest water level measured was 169 feet below sea level at the center of a cone of depression at Lexington Park.

Potentiometric surface of the Aquia Aquifer in southern Maryland, September 2003

USGS Publications Warehouse

Curtin, Stephen E.; Andreason, David C.; Wheeler, Judith C.

2005-01-01

This report presents a map showing the potentiometric surface of the Aquia aquifer in the Aquia Formation of Paleocene age in Southern Maryland during September 2003. The map is based on water-level measurements in 91 wells. The highest measured water level was 40 feet above sea level near the northern boundary and outcrop area of the aquifer in the central part of Anne Arundel County, and was below sea level just south of this area and in the remainder of the study area. The hydraulic gradient increased southeastward toward an extensive cone of depression around well fields at Lexington Park and Solomons Island. Another cone of depression occurred in northern Calvert County due to pumpage at and near North Beach and Chesapeake Beach. The water level measured in this area has declined to 48 feet below sea level. The lowest water level measured was 156 feet below sea level at the center of a cone of depression at Lexington Park.

A comprehensive review of arsenic levels in the semiconductor manufacturing industry.

PubMed

Park, Donguk; Yang, Haengsun; Jeong, Jeeyeon; Ha, Kwonchul; Choi, Sangjun; Kim, Chinyon; Yoon, Chungsik; Park, Dooyong; Paek, Domyung

2010-11-01

This paper presents a summary of arsenic level statistics from air and wipe samples taken from studies conducted in fabrication operations. The main objectives of this study were not only to describe arsenic measurement data but also, through a literature review, to categorize fabrication workers in accordance with observed arsenic levels. All airborne arsenic measurements reported were included in the summary statistics for analysis of the measurement data. The arithmetic mean was estimated assuming a lognormal distribution from the geometric mean and the geometric standard deviation or the range. In addition, weighted arithmetic means (WAMs) were calculated based on the number of measurements reported for each mean. Analysis of variance (ANOVA) was employed to compare arsenic levels classified according to several categories such as the year, sampling type, location sampled, operation type, and cleaning technique. Nine papers were found reporting airborne arsenic measurement data from maintenance workers or maintenance areas in semiconductor chip-making plants. A total of 40 statistical summaries from seven articles were identified that represented a total of 423 airborne arsenic measurements. Arsenic exposure levels taken during normal operating activities in implantation operations (WAM = 1.6 μg m⁻³, no. of samples = 77, no. of statistical summaries = 2) were found to be lower than exposure levels of engineers who were involved in maintenance works (7.7 μg m⁻³, no. of samples = 181, no. of statistical summaries = 19). The highest level (WAM = 218.6 μg m⁻³) was associated with various maintenance works performed inside an ion implantation chamber. ANOVA revealed no significant differences in the WAM arsenic levels among the categorizations based on operation and sampling characteristics. Arsenic levels (56.4 μg m⁻³) recorded during maintenance works performed in dry conditions were found to be much higher than those from maintenance works in wet conditions (0.6 μg m⁻³). Arsenic levels from wipe samples in process areas after maintenance activities ranged from non-detectable to 146 μg cm⁻², indicating the potential for dispersion into the air and hence inhalation. We conclude that workers who are regularly or occasionally involved in maintenance work have higher potential for occupational exposure than other employees who are in charge of routine production work. In addition, fabrication workers can be classified into two groups based on the reviewed arsenic exposure levels: operators with potential for low levels of exposure and maintenance engineers with high levels of exposure. These classifications could be used as a basis for a qualitative ordinal ranking of exposure in an epidemiological study.

A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix B: Data base plots for SSME tests 901-290 through 901-414

NASA Technical Reports Server (NTRS)

Coffin, T.

1986-01-01

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is described. The data base represents dynamic pressure measurements obtained during single engine hot firing tesets of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is also included to estimate spectral trends with SSME power level. Flow dynamic environments in high performance rocket engines are discussed.

A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix C: Data base plots for SSME tests 902-214 through 902-314

NASA Technical Reports Server (NTRS)

Coffin, T.

1986-01-01

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is reported. The data base represents dynamic pressure measurements obtained during single engine hot firing tests of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is included to estimate spectral trends with SSME power level. Flow Dynamic Environments in High Performance Rocket Engines are described.

Geographic Model and Biomarker-Derived Measures of Pesticide Exposure and Parkinson’s Disease

PubMed Central

RITZ, BEATE; COSTELLO, SADIE

2013-01-01

For more than two decades, reports have suggested that pesticides and herbicides may be an etiologic factor in idiopathic Parkinson’s disease (PD). To date, no clear associations with any specific pesticide have been demonstrated from epidemiological studies perhaps, in part, because methods of reliably estimating exposures are lacking. We tested the validity of a Geographic Information Systems (GIS)-based exposure assessment model that estimates potential environmental exposures at residences from pesticide applications to agricultural crops based on California Pesticide Use Reports (PUR). Using lipid-adjusted dichlorodiphenyldichloroethylene (DDE) serum levels as the “gold standard” for pesticide exposure, we conducted a validation study in a sample taken from an ongoing, population-based case–control study of PD in Central California. Residential, occupational, and other risk factor data were collected for 22 cases and 24 controls from Kern county, California. Environmental GIS–PUR-based organochlorine (OC) estimates were derived for each subject and compared to lipid-adjusted DDE serum levels. Relying on a linear regression model, we predicted log-transformed lipid-adjusted DDE serum levels. GIS–PUR-derived OC measure, body mass index, age, gender, mixing and loading pesticides by hand, and using pesticides in the home, together explained 47% of the DDE serum level variance (adjusted r2 = 0.47). The specificity of using our environmental GIS–PUR-derived OC measures to identify those with high-serum DDE levels was reasonably good (87%). Our environmental GIS–PUR-based approach appears to provide a valid model for assessing residential exposures to agricultural pesticides. PMID:17119217

Measuring Liquid-Level Utilizing Wedge Wave

PubMed Central

Honma, Yudai; Mori, Masayuki; Ihara, Ikuo

2017-01-01

A new technique for measuring liquid-level utilizing wedge wave is presented and demonstrated through FEM simulation and a corresponding experiment. The velocities of wedge waves in the air and the water, and the sensitivities for the measurement, are compared with the simulation and the results obtained in the experiments. Combining the simulation and the measurement theory, it is verified that the foundation framework for the methods is available. The liquid-level sensing is carried out using the aluminum waveguide with a 30° wedge in the water. The liquid-level is proportional to the traveling time of the mode 1 wedge wave. The standard deviations and the uncertainties of the measurement are 0.65 mm and 0.21 mm using interface echo, and 0.39 mm and 0.12 mm utilized by end echo, which are smaller than the industry standard of 1.5 mm. The measurement resolutions are 7.68 μm using the interface echo, which is the smallest among all the guided acoustic wave-based liquid-level sensing. PMID:29267232

Epoch-based Entropy for Early Screening of Alzheimer's Disease.

PubMed

Houmani, N; Dreyfus, G; Vialatte, F B

2015-12-01

In this paper, we introduce a novel entropy measure, termed epoch-based entropy. This measure quantifies disorder of EEG signals both at the time level and spatial level, using local density estimation by a Hidden Markov Model on inter-channel stationary epochs. The investigation is led on a multi-centric EEG database recorded from patients at an early stage of Alzheimer's disease (AD) and age-matched healthy subjects. We investigate the classification performances of this method, its robustness to noise, and its sensitivity to sampling frequency and to variations of hyperparameters. The measure is compared to two alternative complexity measures, Shannon's entropy and correlation dimension. The classification accuracies for the discrimination of AD patients from healthy subjects were estimated using a linear classifier designed on a development dataset, and subsequently tested on an independent test set. Epoch-based entropy reached a classification accuracy of 83% on the test dataset (specificity = 83.3%, sensitivity = 82.3%), outperforming the two other complexity measures. Furthermore, it was shown to be more stable to hyperparameter variations, and less sensitive to noise and sampling frequency disturbances than the other two complexity measures.

Preliminary sonic boom correlation of predicted and measured levels for STS-1 entry

NASA Technical Reports Server (NTRS)

Garcia, F., Jr.; Morrison, K. M.; Jones, J. H.; Henderson, H. R.

1982-01-01

A preliminary analysis correlating peaks from sonic boom pressure signatures recorded during the descent trajectory of the Orbiter Columbia, which landed in the dry lake bed at Edwards Air Force Base (EAFB), California, with measured wind tunnel signatures extrapolated from flight altitudes to the ground has been made for Mach numbers ranging from 1.3 to 6. The flight pressure signatures were recorded by microphones positioned at ground level near the groundtrack, whereas the wind tunnel signatures were measured during a test of a 0.0041-scale model Orbiter. The agreement between overpressure estimates based on wind tunnel data using preliminary flight trajectory data and oscillograph traces from ground measurements appears reasonable at this time for the range of Mach numbers considered. More detailed studies using final flight trajectory data and digitized ground measured data will be performed.

A Comparative Analysis of the Validity of US State- and County-Level Social Capital Measures and Their Associations with Population Health

PubMed Central

Lee, Chul-joo; Kim, Daniel

2014-01-01

The goals of this study were to validate a number of available collective social capital measures at the U.S. state and county levels, and to examine the relative extent to which these social capital measures are associated with population health outcomes. Measures of social capital at the U.S. state level included aggregate indices based on the Annenberg National Health Communication Survey (ANHCS) and the Behavioral Risk Factor Surveillance System (BRFSS), Petris Social Capital Index (PSCI), Putnam’s index, and Kim et al.’s scales. County-level measures consisted of Rupasingha et al.’s social capital index (RGFI) and a BRFSS-derived measure. These measures, except for the PSCI, showed evidence of acceptable validity. Moreover, we observed differences across the social capital measures in their associations with population health outcomes. The implications of the findings for future research in this area are discussed. PMID:25574069

Curriculum-Based Measurement of Oral Reading: Evaluation of Growth Estimates Derived with Pre-Post Assessment Methods

ERIC Educational Resources Information Center

Christ, Theodore J.; Monaghen, Barbara D.; Zopluoglu, Cengiz; Van Norman, Ethan R.

2013-01-01

Curriculum-based measurement of oral reading (CBM-R) is used to index the level and rate of student growth across the academic year. The method is frequently used to set student goals and monitor student progress. This study examined the diagnostic accuracy and quality of growth estimates derived from pre-post measurement using CBM-R data. A…

Continuous liquid level detection based on two parallel plastic optical fibers in a helical structure

NASA Astrophysics Data System (ADS)

Zhang, Yingzi; Hou, Yulong; Zhang, Yanjun; Hu, Yanjun; Zhang, Liang; Gao, Xiaolong; Zhang, Huixin; Liu, Wenyi

2018-02-01

A simple and low-cost continuous liquid-level sensor based on two parallel plastic optical fibers (POFs) in a helical structure is presented. The change in the liquid level is determined by measuring the side-coupling power in the passive fiber. The side-coupling ratio is increased by just filling the gap between the two POFs with ultraviolet-curable optical cement, making the proposed sensor competitive. The experimental results show that the side-coupling power declines as the liquid level rises. The sensitivity and the measurement range are flexible and affected by the geometric parameters of the helical structure. A higher sensitivity of 0.0208 μW/mm is acquired for a smaller curvature radius of 5 mm, and the measurement range can be expanded to 120 mm by enlarging the screw pitch to 40 mm. In addition, the reversibility and temperature dependence are studied. The proposed sensor is a cost-effective solution offering the advantages of a simple fabrication process, good reversibility, and compensable temperature dependence.

Measuring Exposure to Direct-to-Consumer Advertising—A Validation Study in the Context of Cancer-Related Treatment Advertising

PubMed Central

Tan, Andy SL; Hornik, Robert C

2014-01-01

This research examines two recurrent conceptual issues of measuring media exposure in survey research in the context of cancer-related direct-to-consumer advertising (CR-DTCA)—the level of content specificity of survey items and the benefits of providing exemplars to aid recall. We evaluated three candidate measures of cancer patients’ self-reported exposure to CR-DTCA; these measures varied in content specificity and provision of ad exemplars. Using data from two distinct population-based surveys, we assessed the performance of each measure based on several reliability and validity criteria. Results across both surveys indicate that all three measures performed equally well in terms of internal consistency, convergent, nomological, and discriminant validity with a few minor differences between these measures. Increased content specificity or inclusion of ad exemplars did not result in better performance of the exposure measures. Participants were able to extrapolate from ad exemplars to report their exposure to broad categories of CR-DTCA. The briefest of the three measures posed the lowest level of survey costs among the three measures and was deployed successfully for both mailed and internet-based survey administration. We discussed future directions for application of these findings in DTCA research for other illness and for media exposure research more generally. PMID:24693332

A VCSEL based system for on-site monitoring of low level methane emission

NASA Astrophysics Data System (ADS)

Kannath, A.; Hodgkinson, J.; Gillard, R. G.; Riley, R. J.; Tatam, R. P.

2011-03-01

Continuous monitoring of methane emissions has assumed greater significance in the recent past due to increasing focus on global warming issues. Many industries have also identified the need for ppm level methane measurement as a means of gaining carbon credits. Conventional instruments based on NDIR spectroscopy are unable to offer the high selectivity and sensitivity required for such measurements. Here we discuss the development of a robust VCSEL based system for accurate low level measurements of methane. A possible area of application is the measurement of residual methane whilst monitoring the output of flare stacks and exhaust gases from methane combustion engines. The system employs a Wavelength Modulation Spectroscopy (WMS) scheme with second harmonic detection at 1651 nm. Optimum modulation frequency and ramp rates were chosen to maintain high resolution and fast response times which are vital for the intended application. Advanced data processing techniques were used to achieve long term sensitivity of the order of 10-5 in absorbance. The system is immune to cross interference from other gases and its inherent design features makes it ideal for large scale commercial production. The instrument maintains its calibration and offers a completely automated continuous monitoring solution for remote on site deployment.

Experimental radiative lifetimes, branching fractions, and oscillator strengths of some levels in Tm III

NASA Astrophysics Data System (ADS)

Yu, Qi; Wang, Xinghao; Li, Qiu; Gong, Yimin; Dai, Zhenwen

2018-06-01

Natural radiative lifetimes for five even-parity levels of Tm III were measured by time-resolved laser-induced fluorescence method. The branching fraction measurements were performed based on the emission spectra of a hollow cathode lamp. By combining the measured branching fractions and the lifetime values reported in this work and in literature, experimental transition probabilities and oscillator strengths for 11 transitions were derived for the first time.

Examining the Level of Convergence among Self-Regulated Learning Microanalytic Processes, Achievement, and a Self-Report Questionnaire

ERIC Educational Resources Information Center

Cleary, Timothy J.; Callan, Gregory L.; Malatesta, Jaime; Adams, Tanya

2015-01-01

This study examined the convergent and predictive validity of self-regulated learning (SRL) microanalytic measures. Specifically, theoretically based relations among a set of self-reflection processes, self-efficacy, and achievement were examined as was the level of convergence between a microanalytic strategy measure and a SRL self-report…

An evaluation method of computer usability based on human-to-computer information transmission model.

PubMed

Ogawa, K

1992-01-01

This paper proposes a new evaluation and prediction method for computer usability. This method is based on our two previously proposed information transmission measures created from a human-to-computer information transmission model. The model has three information transmission levels: the device, software, and task content levels. Two measures, called the device independent information measure (DI) and the computer independent information measure (CI), defined on the software and task content levels respectively, are given as the amount of information transmitted. Two information transmission rates are defined as DI/T and CI/T, where T is the task completion time: the device independent information transmission rate (RDI), and the computer independent information transmission rate (RCI). The method utilizes the RDI and RCI rates to evaluate relatively the usability of software and device operations on different computer systems. Experiments using three different systems, in this case a graphical information input task, confirm that the method offers an efficient way of determining computer usability.

A novel approach to segmentation and measurement of medical image using level set methods.

PubMed

Chen, Yao-Tien

2017-06-01

The study proposes a novel approach for segmentation and visualization plus value-added surface area and volume measurements for brain medical image analysis. The proposed method contains edge detection and Bayesian based level set segmentation, surface and volume rendering, and surface area and volume measurements for 3D objects of interest (i.e., brain tumor, brain tissue, or whole brain). Two extensions based on edge detection and Bayesian level set are first used to segment 3D objects. Ray casting and a modified marching cubes algorithm are then adopted to facilitate volume and surface visualization of medical-image dataset. To provide physicians with more useful information for diagnosis, the surface area and volume of an examined 3D object are calculated by the techniques of linear algebra and surface integration. Experiment results are finally reported in terms of 3D object extraction, surface and volume rendering, and surface area and volume measurements for medical image analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

DUQuE quality management measures: associations between quality management at hospital and pathway levels.

PubMed

Wagner, Cordula; Groene, Oliver; Thompson, Caroline A; Dersarkissian, Maral; Klazinga, Niek S; Arah, Onyebuchi A; Suñol, Rosa

2014-04-01

The assessment of integral quality management (QM) in a hospital requires measurement and monitoring from different perspectives and at various levels of care delivery. Within the DUQuE project (Deepening our Understanding of Quality improvement in Europe), seven measures for QM were developed. This study investigates the relationships between the various quality measures. It is a multi-level, cross-sectional, mixed-method study. As part of the DUQuE project, we invited a random sample of 74 hospitals in 7 countries. The quality managers of these hospitals were the main respondents. Furthermore, data of site visits of external surveyors assessing the participating hospitals were used. Three measures of QM at hospitals level focusing on integral systems (QMSI), compliance with the Plan-Do-Study-Act quality improvement cycle (QMCI) and implementation of clinical quality (CQII). Four measures of QM activities at care pathway level focusing on Specialized expertise and responsibility (SER), Evidence-based organization of pathways (EBOP), Patient safety strategies (PSS) and Clinical review (CR). Positive significant associations were found between the three hospitals level QM measures. Results of the relationships between levels were mixed and showed most associations between QMCI and department-level QM measures for all four types of departments. QMSI was associated with PSS in all types of departments. By using the seven measures of QM, it is possible to get a more comprehensive picture of the maturity of QM in hospitals, with regard to the different levels and across various types of hospital departments.

The Relationship between Reading Level and Sixth Grade Students' Acquisition of Mathematics Standards

ERIC Educational Resources Information Center

Caruthers, Tarchell Peeples

2013-01-01

Current research shows that, despite standards-based mathematics reform, American students lag behind in mathematics achievement when compared to their counterparts in other countries. The purpose of this mixed methods study was to examine if reading level, as measured by the Scholastic Reading Inventory, is related to standards-based mathematics…

Enhacement of intrafield overlay using a design based metrology system

NASA Astrophysics Data System (ADS)

Jo, Gyoyeon; Ji, Sunkeun; Kim, Shinyoung; Kang, Hyunwoo; Park, Minwoo; Kim, Sangwoo; Kim, Jungchan; Park, Chanha; Yang, Hyunjo; Maruyama, Kotaro; Park, Byungjun

2016-03-01

As the scales of the semiconductor devices continue to shrink, accurate measurement and control of the overlay have been emphasized for securing more overlay margin. Conventional overlay analysis methods are based on the optical measurement of the overlay mark. However, the overlay data obtained from these optical methods cannot represent the exact misregistration between two layers at the circuit level. The overlay mismatch may arise from the size or pitch difference between the overlay mark and the real pattern. Pattern distortion, caused by CMP or etching, could be a source of the overlay mismatch as well. Another issue is the overlay variation in the real circuit pattern which varies depending on its location. The optical overlay measurement methods, such as IBO and DBO that use overlay mark on the scribeline, are not capable of defining the exact overlay values of the real circuit. Therefore, the overlay values of the real circuit need to be extracted to integrate the semiconductor device properly. The circuit level overlay measurement using CDSEM is time-consuming in extracting enough data to indicate overall trend of the chip. However DBM tool is able to derive sufficient data to display overlay tendency of the real circuit region with high repeatability. An E-beam based DBM(Design Based Metrology) tool can be an alternative overlay measurement method. In this paper, we are going to certify that the overlay values extracted from optical measurement cannot represent the circuit level overlay values. We will also demonstrate the possibility to correct misregistration between two layers using the overlay data obtained from the DBM system.

Detection of regional air pollution episodes utilizing satellite data in the visual range

NASA Technical Reports Server (NTRS)

Bowley, C. J.; Burke, H. K.; Barnes, J. C.

1981-01-01

A comparative analysis of satellite-observed haze patterns and ground-based aerosol measurements is carried out for July 20-23, 1978. During this period, a significant regional air pollution episode existed across the northeastern United States, accompanied by widespread haze, reduced surface visibility, and elevated sulfate levels measured by the Sulfate Regional Experiment (SURE) network. The results show that the satellite-observed haze patterns correlate closely with the area of reported low surface visibility (less than 4 mi) and high sulfate levels. Quantitative information on total aerosol loading derived from the satellite-digitized data, using an atmospheric radiative transfer model, agrees well with the results obtained from the ground-based measurements.

Minimizing the semantic gap in biomedical content-based image retrieval

NASA Astrophysics Data System (ADS)

Guan, Haiying; Antani, Sameer; Long, L. Rodney; Thoma, George R.

2010-03-01

A major challenge in biomedical Content-Based Image Retrieval (CBIR) is to achieve meaningful mappings that minimize the semantic gap between the high-level biomedical semantic concepts and the low-level visual features in images. This paper presents a comprehensive learning-based scheme toward meeting this challenge and improving retrieval quality. The article presents two algorithms: a learning-based feature selection and fusion algorithm and the Ranking Support Vector Machine (Ranking SVM) algorithm. The feature selection algorithm aims to select 'good' features and fuse them using different similarity measurements to provide a better representation of the high-level concepts with the low-level image features. Ranking SVM is applied to learn the retrieval rank function and associate the selected low-level features with query concepts, given the ground-truth ranking of the training samples. The proposed scheme addresses four major issues in CBIR to improve the retrieval accuracy: image feature extraction, selection and fusion, similarity measurements, the association of the low-level features with high-level concepts, and the generation of the rank function to support high-level semantic image retrieval. It models the relationship between semantic concepts and image features, and enables retrieval at the semantic level. We apply it to the problem of vertebra shape retrieval from a digitized spine x-ray image set collected by the second National Health and Nutrition Examination Survey (NHANES II). The experimental results show an improvement of up to 41.92% in the mean average precision (MAP) over conventional image similarity computation methods.

Quantifying the Uncertainty in High Spatial and Temporal Resolution Synthetic Land Surface Reflectance at Pixel Level Using Ground-Based Measurements

NASA Astrophysics Data System (ADS)

Kong, J.; Ryu, Y.

2017-12-01

Algorithms for fusing high temporal frequency and high spatial resolution satellite images are widely used to develop dense time-series land surface observations. While many studies have revealed that the synthesized frequent high spatial resolution images could be successfully applied in vegetation mapping and monitoring, validation and correction of fused images have not been focused than its importance. To evaluate the precision of fused image in pixel level, in-situ reflectance measurements which could account for the pixel-level heterogeneity are necessary. In this study, the synthetic images of land surface reflectance were predicted by the coarse high-frequency images acquired from MODIS and high spatial resolution images from Landsat-8 OLI using the Flexible Spatiotemporal Data Fusion (FSDAF). Ground-based reflectance was measured by JAZ Spectrometer (Ocean Optics, Dunedin, FL, USA) on rice paddy during five main growth stages in Cheorwon-gun, Republic of Korea, where the landscape heterogeneity changes through the growing season. After analyzing the spatial heterogeneity and seasonal variation of land surface reflectance based on the ground measurements, the uncertainties of the fused images were quantified at pixel level. Finally, this relationship was applied to correct the fused reflectance images and build the seasonal time series of rice paddy surface reflectance. This dataset could be significant for rice planting area extraction, phenological stages detection, and variables estimation.

Organizational readiness for implementing change: a psychometric assessment of a new measure

PubMed Central

2014-01-01

Background Organizational readiness for change in healthcare settings is an important factor in successful implementation of new policies, programs, and practices. However, research on the topic is hindered by the absence of a brief, reliable, and valid measure. Until such a measure is developed, we cannot advance scientific knowledge about readiness or provide evidence-based guidance to organizational leaders about how to increase readiness. This article presents results of a psychometric assessment of a new measure called Organizational Readiness for Implementing Change (ORIC), which we developed based on Weiner’s theory of organizational readiness for change. Methods We conducted four studies to assess the psychometric properties of ORIC. In study one, we assessed the content adequacy of the new measure using quantitative methods. In study two, we examined the measure’s factor structure and reliability in a laboratory simulation. In study three, we assessed the reliability and validity of an organization-level measure of readiness based on aggregated individual-level data from study two. In study four, we conducted a small field study utilizing the same analytic methods as in study three. Results Content adequacy assessment indicated that the items developed to measure change commitment and change efficacy reflected the theoretical content of these two facets of organizational readiness and distinguished the facets from hypothesized determinants of readiness. Exploratory and confirmatory factor analysis in the lab and field studies revealed two correlated factors, as expected, with good model fit and high item loadings. Reliability analysis in the lab and field studies showed high inter-item consistency for the resulting individual-level scales for change commitment and change efficacy. Inter-rater reliability and inter-rater agreement statistics supported the aggregation of individual level readiness perceptions to the organizational level of analysis. Conclusions This article provides evidence in support of the ORIC measure. We believe this measure will enable testing of theories about determinants and consequences of organizational readiness and, ultimately, assist healthcare leaders to reduce the number of health organization change efforts that do not achieve desired benefits. Although ORIC shows promise, further assessment is needed to test for convergent, discriminant, and predictive validity. PMID:24410955

Measuring water level in rivers and lakes from lightweight Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Bandini, Filippo; Jakobsen, Jakob; Olesen, Daniel; Reyna-Gutierrez, Jose Antonio; Bauer-Gottwein, Peter

2017-05-01

The assessment of hydrologic dynamics in rivers, lakes, reservoirs and wetlands requires measurements of water level, its temporal and spatial derivatives, and the extent and dynamics of open water surfaces. Motivated by the declining number of ground-based measurement stations, research efforts have been devoted to the retrieval of these hydraulic properties from spaceborne platforms in the past few decades. However, due to coarse spatial and temporal resolutions, spaceborne missions have several limitations when assessing the water level of terrestrial surface water bodies and determining complex water dynamics. Unmanned Aerial Vehicles (UAVs) can fill the gap between spaceborne and ground-based observations, and provide high spatial resolution and dense temporal coverage data, in quick turn-around time, using flexible payload design. This study focused on categorizing and testing sensors, which comply with the weight constraint of small UAVs (around 1.5 kg), capable of measuring the range to water surface. Subtracting the measured range from the vertical position retrieved by the onboard Global Navigation Satellite System (GNSS) receiver, we can determine the water level (orthometric height). Three different ranging payloads, which consisted of a radar, a sonar and an in-house developed camera-based laser distance sensor (CLDS), have been evaluated in terms of accuracy, precision, maximum ranging distance and beam divergence. After numerous flights, the relative accuracy of the overall system was estimated. A ranging accuracy better than 0.5% of the range and a maximum ranging distance of 60 m were achieved with the radar. The CLDS showed the lowest beam divergence, which is required to avoid contamination of the signal from interfering surroundings for narrow fields of view. With the GNSS system delivering a relative vertical accuracy better than 3-5 cm, water level can be retrieved with an overall accuracy better than 5-7 cm.

Retrieval of free-tropospheric BrO from MAX-DOAS measurements at the high-altitude alpine station of Jungfraujoch

NASA Astrophysics Data System (ADS)

Van Roozendael, Michel; Hendrick, Francois; De Smedt, Isabelle; Fayt, Caroline; Gielen, Clio; Hermans, Christian; Pinardi, Gaia; Tack, Frederik; Theys, Nicolas

2014-05-01

There are currently many open questions about the sources, transport, and photochemical processing that control the abundance of BrO and its precursors in the global troposphere. Recent experimental studies based on various platforms and instrumentations indicate contrasting results reflecting the scarcity of the measurements and the experimental challenge of quantifying the typically low abundance levels of BrO. Modeling studies indicate however that the presence of only 1-2 pptv levels of reactive bromine has important consequences for free tropospheric ozone with indirect climate implications. The MAX-DOAS technique offers high sensitivity for near-surface trace gas measurements and it is well suited to BrO detection. From a high altitude site such as the Jungfraujoch which is located in the Swiss Alps at about 3600 m ASL, the free-troposphere can be sampled under favourable conditions. We report on attempts to quantify the free tropospheric BrO level based on MAXDOAS measurements performed by BIRA-IASB in the period from June 2010 until December 2012. Retrievals are based on the DOAS method followed by vertical profile inversion using an Optimal Estimation scheme. The possible sources of bias that can affect the spectral retrieval of BrO are carefully investigated and various sensitivity tests are performed to assess the stability of the inversion. Results are compared with independent estimates of the mid-latitude tropospheric BrO based on satellite measurements.

Measurements of the Received Signal Level and Service Coverage Area at the IEEE 802.11 Access Point in the Building

NASA Astrophysics Data System (ADS)

Gunantara, N.; Sudiarta, P. K.; Prasetya, AAN A. I.; Dharma, A.; Gde Antara, I. N.

2018-04-01

Access point (AP) is part of a Wireless Local Access Network (WLAN) with its communications using WiFi. AP is used to transmit and receive data to users/clients. The ability of AP to serve users/clients depends on many factors. Moreover, if AP is applied in conditions inside the building. In this study, AP is installed at two points inside the building and then measured in the form of the received signal level (RSL) and service coverage area. One AP measured its performance by 26 measurement points and the other AP measured its performance by 20 measurement points. When AP has measured its performance then another AP position is switched off. Based on the measurement result, the received signal level value is the highest value is about -47 dBm at a distance of 3.2 m, while the lowest is about -79 dBm at a 9.21 m because it is on barrier 2 walls. While based on service coverage area, the area which is far away from the AP then the quality of service becomes bad because the transmitted signal is weakening caused by the distance and the loss of the wall.

Cognitive Load Measurement in a Virtual Reality-based Driving System for Autism Intervention

PubMed Central

Zhang, Lian; Wade, Joshua; Bian, Dayi; Fan, Jing; Swanson, Amy; Weitlauf, Amy; Warren, Zachary; Sarkar, Nilanjan

2016-01-01

Autism Spectrum Disorder (ASD) is a highly prevalent neurodevelopmental disorder with enormous individual and social cost. In this paper, a novel virtual reality (VR)-based driving system was introduced to teach driving skills to adolescents with ASD. This driving system is capable of gathering eye gaze, electroencephalography, and peripheral physiology data in addition to driving performance data. The objective of this paper is to fuse multimodal information to measure cognitive load during driving such that driving tasks can be individualized for optimal skill learning. Individualization of ASD intervention is an important criterion due to the spectrum nature of the disorder. Twenty adolescents with ASD participated in our study and the data collected were used for systematic feature extraction and classification of cognitive loads based on five well-known machine learning methods. Subsequently, three information fusion schemes—feature level fusion, decision level fusion and hybrid level fusion—were explored. Results indicate that multimodal information fusion can be used to measure cognitive load with high accuracy. Such a mechanism is essential since it will allow individualization of driving skill training based on cognitive load, which will facilitate acceptance of this driving system for clinical use and eventual commercialization. PMID:28966730

Cognitive Load Measurement in a Virtual Reality-based Driving System for Autism Intervention.

PubMed

Zhang, Lian; Wade, Joshua; Bian, Dayi; Fan, Jing; Swanson, Amy; Weitlauf, Amy; Warren, Zachary; Sarkar, Nilanjan

2017-01-01

Autism Spectrum Disorder (ASD) is a highly prevalent neurodevelopmental disorder with enormous individual and social cost. In this paper, a novel virtual reality (VR)-based driving system was introduced to teach driving skills to adolescents with ASD. This driving system is capable of gathering eye gaze, electroencephalography, and peripheral physiology data in addition to driving performance data. The objective of this paper is to fuse multimodal information to measure cognitive load during driving such that driving tasks can be individualized for optimal skill learning. Individualization of ASD intervention is an important criterion due to the spectrum nature of the disorder. Twenty adolescents with ASD participated in our study and the data collected were used for systematic feature extraction and classification of cognitive loads based on five well-known machine learning methods. Subsequently, three information fusion schemes-feature level fusion, decision level fusion and hybrid level fusion-were explored. Results indicate that multimodal information fusion can be used to measure cognitive load with high accuracy. Such a mechanism is essential since it will allow individualization of driving skill training based on cognitive load, which will facilitate acceptance of this driving system for clinical use and eventual commercialization.

Potentiometric Surface of the Patuxent Aquifer in Southern Maryland, September 2009

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2010-01-01

This report presents a map showing the potentiometric surface of the Patuxent aquifer in the Patuxent Formation of Early Cretaceous age in Southern Maryland during September 2009. The map is based on water-level measurements in 42 wells. The highest measured water level was 169 feet above sea level in the outcrop area of the aquifer in northern Prince George's County. From this area, the potentiometric surface declined south towards well fields at Glen Burnie, Bryans Road, the Morgantown power plant, and the Chalk Point power plant. The measured groundwater levels were 78 feet below sea level at Glen Burnie, 56 feet below sea level at Bryans Road, 29 feet below sea level at the Morgantown power plant, and 28 feet below sea level at the Chalk Point power plant. The map also shows well yield in gallons per day for 2008 at wells or well fields.

MiOXSYS: a novel method of measuring oxidation reduction potential in semen and seminal plasma.

PubMed

Agarwal, Ashok; Sharma, Rakesh; Roychoudhury, Shubhadeep; Du Plessis, Stefan; Sabanegh, Edmund

2016-09-01

To measure oxidative reduction potential (ORP) in semen and seminal plasma and to establish their reference levels. ORP levels were measured in semen and seminal plasma. Tertiary hospital. Twenty-six controls and 33 infertile men. None. Static ORP (sORP) and capacitance ORP (cORP) were measured in semen and seminal plasma at time 0 and 120 minutes. Correlation of ORP was assessed between [1] semen and seminal plasma and [2] time 0 and 120 minutes. The association with sperm parameters was studied in (a) controls and (b) infertile patients, and a receiver operating characteristic curve was generated to establish the sORP cutoff. Semen sORP and cORP levels were associated with seminal plasma levels at time 0 and time 120 minutes. In controls and infertile patients, an inverse relationship of sORP levels was established with concentration and total sperm count in semen as well as seminal plasma at time 0 and 120 minutes. Classification of subjects based on sperm motility showed that subjects with abnormal motility present with poor concentration, total count, morphology, and elevated levels of semen and seminal plasma sORP at time 120 minutes. The sORP cutoff of 1.48 in semen and 2.09 in seminal plasma based on motility was able to distinguish subjects with normal semen quality from those with abnormal semen quality. The MiOXSYS System can reliably measure ORP levels in semen and seminal plasma. ORP levels are not affected by semen age, making this new technology easy to employ in a clinical setting. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Construct and face validity of the educational computer-based environment (ECE) assessment scenarios for basic endoneurosurgery skills.

PubMed

Cagiltay, Nergiz Ercil; Ozcelik, Erol; Sengul, Gokhan; Berker, Mustafa

2017-11-01

In neurosurgery education, there is a paradigm shift from time-based training to criterion-based model for which competency and assessment becomes very critical. Even virtual reality simulators provide alternatives to improve education and assessment in neurosurgery programs and allow for several objective assessment measures, there are not many tools for assessing the overall performance of trainees. This study aims to develop and validate a tool for assessing the overall performance of participants in a simulation-based endoneurosurgery training environment. A training program was developed in two levels: endoscopy practice and beginning surgical practice based on four scenarios. Then, three experiments were conducted with three corresponding groups of participants (Experiment 1, 45 (32 beginners, 13 experienced), Experiment 2, 53 (40 beginners, 13 experienced), and Experiment 3, 26 (14 novices, 12 intermediate) participants). The results analyzed to understand the common factors among the performance measurements of these experiments. Then, a factor capable of assessing the overall skill levels of surgical residents was extracted. Afterwards, the proposed measure was tested to estimate the experience levels of the participants. Finally, the level of realism of these educational scenarios was assessed. The factor formed by time, distance, and accuracy on simulated tasks provided an overall performance indicator. The prediction correctness was very high for the beginners than the one for experienced surgeons in Experiments 1 and 2. When non-dominant hand is used in a surgical procedure-based scenario, skill levels of surgeons can be better predicted. The results indicate that the scenarios in Experiments 1 and 2 can be used as an assessment tool for the beginners, and scenario-2 in Experiment 3 can be used as an assessment tool for intermediate and novice levels. It can be concluded that forming the balance between perceived action capacities and skills is critical for better designing and developing skill assessment surgical simulation tools.

Evaluating Curriculum-Based Measurement from a Behavioral Assessment Perspective

ERIC Educational Resources Information Center

Ardoin, Scott P.; Roof, Claire M.; Klubnick, Cynthia; Carfolite, Jessica

2008-01-01

Curriculum-based measurement Reading (CBM-R) is an assessment procedure used to evaluate students' relative performance compared to peers and to evaluate their growth in reading. Within the response to intervention (RtI) model, CBM-R data are plotted in time series fashion as a means modeling individual students' response to varying levels of…

An Examination of Alternative Poverty Measures for the Wisconsin Equalization Aid Formula.

ERIC Educational Resources Information Center

Cibulka, James G.

1986-01-01

Wisconsin's guaranteed tax base equalization formula has no direct adjustment for the additional costs of educating poverty level pupils. This paper establishes the need for an adjustment and examines three measures (based on varying poverty definitions) to determine which provides the most equitable funding formula for educating poor children. (9…

Measure for Measure: How Proficiency-Based Accountability Systems Affect Inequality in Academic Achievement

ERIC Educational Resources Information Center

Jennings, Jennifer; Sohn, Heeju

2014-01-01

How do proficiency-based accountability systems affect inequality in academic achievement? This article reconciles mixed findings in the literature by demonstrating that three factors jointly determine accountability's impact. First, by analyzing student-level data from a large urban school district, we find that when educators face accountability…

An Examination of the Relationship between Computation, Problem Solving, and Reading

ERIC Educational Resources Information Center

Cormier, Damien C.; Yeo, Seungsoo; Christ, Theodore J.; Offrey, Laura D.; Pratt, Katherine

2016-01-01

The purpose of this study is to evaluate the relationship of mathematics calculation rate (curriculum-based measurement of mathematics; CBM-M), reading rate (curriculum-based measurement of reading; CBM-R), and mathematics application and problem solving skills (mathematics screener) among students at four levels of proficiency on a statewide…

Simulation of fiber optic liquid level sensor demodulation system

NASA Astrophysics Data System (ADS)

Yi, Cong-qin; Luo, Yun; Zhang, Zheng-ping

Measuring liquid level with high accuracy is an urgent requirement. This paper mainly focus on the demodulation system of fiber-optic liquid level sensor based on Fabry-Perot cavity, design and simulate the demodulation system by the single-chip simulation software.

Hunter versus CIE color measurement systems for analysis of milk-based beverages.

PubMed

Cheng, Ni; Barbano, David M; Drake, Mary Anne

2018-06-01

The objective of our work was to determine the differences in sensitivity of Hunter and International Commission on Illumination (CIE) methods at 2 different viewer angles (2 and 10°) for measurement of whiteness, red/green, and blue/yellow color of milk-based beverages over a range of composition. Sixty combinations of milk-based beverages were formulated (2 replicates) with a range of fat level from 0.2 to 2%, true protein level from 3 to 5%, and casein as a percent of true protein from 5 to 80% to provide a wide range of milk-based beverage color. In addition, commercial skim, 1 and 2% fat high-temperature, short-time pasteurized fluid milks were analyzed. All beverage formulations were HTST pasteurized and cooled to 4°C before analysis. Color measurement viewer angle (2 vs. 10°) had very little effect on objective color measures of milk-based beverages with a wide range of composition for either the Hunter or CIE color measurement system. Temperature (4, 20, and 50°C) of color measurement had a large effect on the results of color measurement in both the Hunter and CIE measurement systems. The effect of milk beverage temperature on color measurement results was the largest for skim milk and the least for 2% fat milk. This highlights the need for proper control of beverage serving temperature for sensory panel analysis of milk-based beverages with very low fat content and for control of milk temperature when doing objective color analysis for quality control in manufacture of milk-based beverages. The Hunter system of color measurement was more sensitive to differences in whiteness among milk-based beverages than the CIE system, whereas the CIE system was much more sensitive to differences in yellowness among milk-based beverages. There was little difference between the Hunter and CIE system in sensitivity to green/red color of milk-based beverages. In defining milk-based beverage product specifications for objective color measures for dairy product manufacturers, the viewer angle, color measurement system (CIE vs. Hunter), and sample measurement temperature should be specified along with type of illuminant. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A safety-based decision making architecture for autonomous systems

NASA Technical Reports Server (NTRS)

Musto, Joseph C.; Lauderbaugh, L. K.

1991-01-01

Engineering systems designed specifically for space applications often exhibit a high level of autonomy in the control and decision-making architecture. As the level of autonomy increases, more emphasis must be placed on assimilating the safety functions normally executed at the hardware level or by human supervisors into the control architecture of the system. The development of a decision-making structure which utilizes information on system safety is detailed. A quantitative measure of system safety, called the safety self-information, is defined. This measure is analogous to the reliability self-information defined by McInroy and Saridis, but includes weighting of task constraints to provide a measure of both reliability and cost. An example is presented in which the safety self-information is used as a decision criterion in a mobile robot controller. The safety self-information is shown to be consistent with the entropy-based Theory of Intelligent Machines defined by Saridis.

Codon usage and amino acid usage influence genes expression level.

PubMed

Paul, Prosenjit; Malakar, Arup Kumar; Chakraborty, Supriyo

2018-02-01

Highly expressed genes in any species differ in the usage frequency of synonymous codons. The relative recurrence of an event of the favored codon pair (amino acid pairs) varies between gene and genomes due to varying gene expression and different base composition. Here we propose a new measure for predicting the gene expression level, i.e., codon plus amino bias index (CABI). Our approach is based on the relative bias of the favored codon pair inclination among the genes, illustrated by analyzing the CABI score of the Medicago truncatula genes. CABI showed strong correlation with all other widely used measures (CAI, RCBS, SCUO) for gene expression analysis. Surprisingly, CABI outperforms all other measures by showing better correlation with the wet-lab data. This emphasizes the importance of the neighboring codons of the favored codon in a synonymous group while estimating the expression level of a gene.

Effects of gross motor function and manual function levels on performance-based ADL motor skills of children with spastic cerebral palsy.

PubMed

Park, Myoung-Ok

2017-02-01

[Purpose] The purpose of this study was to determine effects of Gross Motor Function Classification System and Manual Ability Classification System levels on performance-based motor skills of children with spastic cerebral palsy. [Subjects and Methods] Twenty-three children with cerebral palsy were included. The Assessment of Motor and Process Skills was used to evaluate performance-based motor skills in daily life. Gross motor function was assessed using Gross Motor Function Classification Systems, and manual function was measured using the Manual Ability Classification System. [Results] Motor skills in daily activities were significantly different on Gross Motor Function Classification System level and Manual Ability Classification System level. According to the results of multiple regression analysis, children categorized as Gross Motor Function Classification System level III scored lower in terms of performance based motor skills than Gross Motor Function Classification System level I children. Also, when analyzed with respect to Manual Ability Classification System level, level II was lower than level I, and level III was lower than level II in terms of performance based motor skills. [Conclusion] The results of this study indicate that performance-based motor skills differ among children categorized based on Gross Motor Function Classification System and Manual Ability Classification System levels of cerebral palsy.

Improvement of the predicted aural detection code ICHIN (I Can Hear It Now)

NASA Technical Reports Server (NTRS)

Mueller, Arnold W.; Smith, Charles D.; Lemasurier, Phillip

1993-01-01

Acoustic tests were conducted to study the far-field sound pressure levels and aural detection ranges associated with a Sikorsky S-76A helicopter in straight and level flight at various advancing blade tip Mach numbers. The flight altitude was nominally 150 meters above ground level. This paper compares the normalized predicted aural detection distances, based on the measured far-field sound pressure levels, to the normalized measured aural detection distances obtained from sound jury response measurements obtained during the same test. Both unmodified and modified versions of the prediction code ICHIN-6 (I Can Hear It Now) were used to produce the results for this study.

A Comparative Study of the Applied Methods for Estimating Deflection of the Vertical in Terrestrial Geodetic Measurements

PubMed Central

Vittuari, Luca; Tini, Maria Alessandra; Sarti, Pierguido; Serantoni, Eugenio; Borghi, Alessandra; Negusini, Monia; Guillaume, Sébastien

2016-01-01

This paper compares three different methods capable of estimating the deflection of the vertical (DoV): one is based on the joint use of high precision spirit leveling and Global Navigation Satellite Systems (GNSS), a second uses astro-geodetic measurements and the third gravimetric geoid models. The working data sets refer to the geodetic International Terrestrial Reference Frame (ITRF) co-location sites of Medicina (Northern, Italy) and Noto (Sicily), these latter being excellent test beds for our investigations. The measurements were planned and realized to estimate the DoV with a level of precision comparable to the angular accuracy achievable in high precision network measured by modern high-end total stations. The three methods are in excellent agreement, with an operational supremacy of the astro-geodetic method, being faster and more precise than the others. The method that combines leveling and GNSS has slightly larger standard deviations; although well within the 1 arcsec level, which was assumed as threshold. Finally, the geoid model based method, whose 2.5 arcsec standard deviations exceed this threshold, is also statistically consistent with the others and should be used to determine the DoV components where local ad hoc measurements are lacking. PMID:27104544

A School-Level Proxy Measure for Individual-level Poverty Using School-Level Eligibility for Free and Reduced-Price Meals

ERIC Educational Resources Information Center

Day, Sophia E.; Hinterland, Kinjia; Myers, Christa; Gupta, Leena; Harris, Tiffany G.; Konty, Kevin J.

2016-01-01

Background: Socioeconomic status (SES) impacts health outcomes. The Youth Risk Behavior Survey (YRBS), like many school-based data sources, lacks individual-level poverty information. We propose using school-level percentages of student eligibility for free/reduced-price meals (%FRPM) as a proxy for individual-level poverty. Methods: Using the New…

Integrated ZnO nanoparticles on paper-based microfluidic: toward efficient analytical device for glucose detection based on impedance and FTIR measurement

NASA Astrophysics Data System (ADS)

Yuwono, Rio Akbar; Izdiharruddin, Mokhammad Fahmi; Wahyuono, Ruri Agung

2016-11-01

Microfluidic paper-based analytical devices decorated with ZnO nanospherical (nanoSPs) aggregates (ZnO-μPAD) for glucose detection have been fabricated. ZnO nanoSPs were prepared by wet chemical synthesis and integrated on the optimized geometry of ZnO-μPAD has 0.2 and 0.4 mm of channel width and length, respectively. Glucose detection measurements were based on electrochemical and infrared transmission measurements. The glucose concentrations were adjusted as 5, 6.5, and 9 mmol, i.e. typical glucose level for normal, pre-diabetes and diabetes, in a mixture of ringer lactate as simulated biological fluid and red blood cells. ZnO nanoSPs in this study possess an average aggregate size of 160 nm formed by clustered 18 nm crystallite size and ordered porous matrix as well as a surface area of 15 m2·g-1.The separation process of the glucose sample on ZnO-μPAD requires approximately 45 s. The glucose detection results show that both electrochemical-based and FTIR-based measurements perform a linear measurement system (R2 of 0.81 to 0.99) with a relatively high sensitivity. A linearly decreasing impedance spanning from 2.2 - 0.6 Ohm and linearly increasing ΔIR transmission spanning from 3 - 19% are obtained for glucose level ranging from 5 - 9 mmol.

Potentiometric Surface of the Lower Patapsco Aquifer in Southern Maryland, September 2009

USGS Publications Warehouse

Curtin, Stephen E.; Andreasin, David C.; Staley, Andrew W.

2010-01-01

This report presents a map showing the potentiometric surface of the lower Patapsco aquifer in the Patapsco Formation of Early Cretaceous age in Southern Maryland during September 2009. The map is based on water-level measurements in 64 wells. The highest measured water level was 110 feet above sea level near the northwestern boundary and outcrop area of the aquifer in northern Prince George's County. From this area, the potentiometric surface declined towards well fields at Severndale, Broad Creek, and Arnold. The measured groundwater levels were 99 feet below sea level at Severndale, 50 feet below sea level at Broad Creek, and 36 feet below sea level at Arnold. There was also a cone of depression in Charles County that includes Waldorf, La Plata, Indian Head, and the Morgantown power plant. The groundwater levels measured were as low as 215 feet below sea level at Waldorf, 149 feet below sea level at La Plata, 121 feet below sea level at Indian Head, and 96 feet below sea level at the Morgantown power plant. The map also shows well yield in gallons per day for 2008 at wells or well fields.

Precision calibration of the silicon doping level in gallium arsenide epitaxial layers

NASA Astrophysics Data System (ADS)

Mokhov, D. V.; Berezovskaya, T. N.; Kuzmenkov, A. G.; Maleev, N. A.; Timoshnev, S. N.; Ustinov, V. M.

2017-10-01

An approach to precision calibration of the silicon doping level in gallium arsenide epitaxial layers is discussed that is based on studying the dependence of the carrier density in the test GaAs layer on the silicon- source temperature using the Hall-effect and CV profiling techniques. The parameters are measured by standard or certified measuring techniques and approved measuring instruments. It is demonstrated that the use of CV profiling for controlling the carrier density in the test GaAs layer at the thorough optimization of the measuring procedure ensures the highest accuracy and reliability of doping level calibration in the epitaxial layers with a relative error of no larger than 2.5%.

USB environment measurements based on full-scale static engine ground tests

NASA Technical Reports Server (NTRS)

Sussman, M. B.; Harkonen, D. L.; Reed, J. B.

1976-01-01

Flow turning parameters, static pressures, surface temperatures, surface fluctuating pressures and acceleration levels were measured in the environment of a full-scale upper surface blowing (USB) propulsive lift test configuration. The test components included a flightworthy CF6-50D engine, nacelle, and USB flap assembly utilized in conjunction with ground verification testing of the USAF YC-14 Advanced Medium STOL Transport propulsion system. Results, based on a preliminary analysis of the data, generally show reasonable agreement with predicted levels based on model data. However, additional detailed analysis is required to confirm the preliminary evaluation, to help delineate certain discrepancies with model data, and to establish a basis for future flight test comparisons.

Lipid and Creatinine Adjustment to Evaluate Health Effects of Environmental Exposures.

PubMed

O'Brien, Katie M; Upson, Kristen; Buckley, Jessie P

2017-03-01

Urine- and serum-based biomarkers are useful for assessing individuals' exposure to environmental factors. However, variations in urinary creatinine (a measure of dilution) or serum lipid levels, if not adequately corrected for, can directly impact biomarker concentrations and bias exposure-disease association measures. Recent methodological literature has considered the complex relationships between creatinine or serum lipid levels, exposure biomarkers, outcomes, and other potentially relevant factors using directed acyclic graphs and simulation studies. The optimal measures of urinary dilution and serum lipids have also been investigated. Existing evidence supports the use of covariate-adjusted standardization plus creatinine adjustment for urinary biomarkers and standardization plus serum lipid adjustment for lipophilic, serum-based biomarkers. It is unclear which urinary dilution measure is best, but all serum lipid measures performed similarly. Future research should assess methods for pooled biomarkers and for studying diseases and exposures that affect creatinine or serum lipids directly.

Lipid and Creatinine Adjustment to Evaluate Health Effects of Environmental Exposures

PubMed Central

O’Brien, Katie M.; Upson, Kristen; Buckley, Jessie P.

2017-01-01

Purpose of review Urine- and serum-based biomarkers are useful for assessing individuals’ exposure to environmental factors. However, variations in urinary creatinine (a measure of dilution) or serum lipid levels, if not adequately corrected for, can directly impact biomarker concentrations and bias exposure-disease association measures. Recent findings Recent methodological literature has considered the complex relationships between creatinine or serum lipid levels, exposure biomarkers, outcomes, and other potentially relevant factors using directed acyclic graphs and simulation studies. The optimal measures of urinary dilution and serum lipids have also been investigated. Summary Existing evidence supports the use of covariate-adjusted standardization plus creatinine adjustment for urinary biomarkers and standardization plus serum lipid adjustment for lipophilic, serum-based biomarkers. It is unclear which urinary dilution measure is best, but all serum lipid measures performed similarly. Future research should assess methods for pooled biomarkers and for studying diseases and exposures that affect creatinine or serum lipids directly. PMID:28097619

EAP-based critical incident stress management: utilization of a practice-based assessment of incident severity level in responding to workplace trauma.

PubMed

DeFraia, Gary S

2013-01-01

Central to the field of trauma psychology is assessment of the impact of critical incidents on individuals, as measured by individual symptoms of stress. Accordingly, the trauma literature reflects a proliferation of clinical impact of event scales. Workplace incidents however, affect not only individual employees, but also work organizations, requiring a multi-level response. Critical incident stress management (CISM) is the most prevalent multi-level incident response strategy utilized by organizations, often through specialized CISM units operating within their employee assistance programs (EAPs). While EAP-based CISM units seeks to support both individuals and organizations, studies focused on individual stress dominate the literature, mirroring assessment scales that tend to emphasize clinical as opposed to organizational practice. This research contributes to less-prevalent studies exploring incident characteristics as disruptive to organizations, rather than clinical symptoms as disruptive to individuals. To measure incident disruption, an EAP-based CISM unit developed a critical incident severity scale. By analyzing this unit's extensive practice database, this exploratory study examines how critical incident severity level varies among various types of incidents. Employing the methodology of clinical data mining, this practice-based research generates evidence-informed practice recommendations in the areas of EAP-based CISM intake assessment, organizational consultation and incident response planning.

A comparison study of size-specific dose estimate calculation methods.

PubMed

Parikh, Roshni A; Wien, Michael A; Novak, Ronald D; Jordan, David W; Klahr, Paul; Soriano, Stephanie; Ciancibello, Leslie; Berlin, Sheila C

2018-01-01

The size-specific dose estimate (SSDE) has emerged as an improved metric for use by medical physicists and radiologists for estimating individual patient dose. Several methods of calculating SSDE have been described, ranging from patient thickness or attenuation-based (automated and manual) measurements to weight-based techniques. To compare the accuracy of thickness vs. weight measurement of body size to allow for the calculation of the size-specific dose estimate (SSDE) in pediatric body CT. We retrospectively identified 109 pediatric body CT examinations for SSDE calculation. We examined two automated methods measuring a series of level-specific diameters of the patient's body: method A used the effective diameter and method B used the water-equivalent diameter. Two manual methods measured patient diameter at two predetermined levels: the superior endplate of L2, where body width is typically most thin, and the superior femoral head or iliac crest (for scans that did not include the pelvis), where body width is typically most thick; method C averaged lateral measurements at these two levels from the CT projection scan, and method D averaged lateral and anteroposterior measurements at the same two levels from the axial CT images. Finally, we used body weight to characterize patient size, method E, and compared this with the various other measurement methods. Methods were compared across the entire population as well as by subgroup based on body width. Concordance correlation (ρ c ) between each of the SSDE calculation methods (methods A-E) was greater than 0.92 across the entire population, although the range was wider when analyzed by subgroup (0.42-0.99). When we compared each SSDE measurement method with CTDI vol, there was poor correlation, ρ c <0.77, with percentage differences between 20.8% and 51.0%. Automated computer algorithms are accurate and efficient in the calculation of SSDE. Manual methods based on patient thickness provide acceptable dose estimates for pediatric patients <30 cm in body width. Body weight provides a quick and practical method to identify conversion factors that can be used to estimate SSDE with reasonable accuracy in pediatric patients with body width ≥20 cm.

Carotid baroreceptor influence on forearm vascular resistance during low level lower body negative pressure

NASA Technical Reports Server (NTRS)

Thompson, Cynthia A.; Ludwig, David A.; Convertino, Victor A.

1991-01-01

The degree of forearm vasoconstriction induced by low levels of lower body negative pressure (LBNP) provides a measure of the responsiveness of the cardiopulmonary baroreflex. The validity of this measurement is based on the assumption that this vasoconstriction response is not influenced by unloading of carotid baroreceptors. To test the hypothesis that arterial baroreceptor unloading does not alter the degree of forearm vascular resistance during low levels of LBNP, 12 subjects were exposed to -15 and -20 mm Hg LBNP with and without additional artificial (+ 10 mm Hg neck pressure) unloading of the carotid baroreceptors. There was no measurable influence of carotid unloading on forearm vascular resistance at either level of LBNP. It is concluded that forearm vascular resistance measured during cardiopulmonary baroreceptor unloading is unaffected by carotid baroreceptor unloading within the magnitude encountered during low levels of LBNP.

Auditory risk assessment of college music students in jazz band-based instructional activity.

PubMed

Gopal, Kamakshi V; Chesky, Kris; Beschoner, Elizabeth A; Nelson, Paul D; Stewart, Bradley J

2013-01-01

It is well-known that musicians are at risk for music-induced hearing loss, however, systematic evaluation of music exposure and its effects on the auditory system are still difficult to assess. The purpose of the study was to determine if college students in jazz band-based instructional activity are exposed to loud classroom noise and consequently exhibit acute but significant changes in basic auditory measures compared to non-music students in regular classroom sessions. For this we (1) measured and compared personal exposure levels of college students (n = 14) participating in a routine 50 min jazz ensemble-based instructional activity (experimental) to personal exposure levels of non-music students (n = 11) participating in a 50-min regular classroom activity (control), and (2) measured and compared pre- to post-auditory changes associated with these two types of classroom exposures. Results showed that the L eq (equivalent continuous noise level) generated during the 50 min jazz ensemble-based instructional activity ranged from 95 dBA to 105.8 dBA with a mean of 99.5 ± 2.5 dBA. In the regular classroom, the L eq ranged from 46.4 dBA to 67.4 dBA with a mean of 49.9 ± 10.6 dBA. Additionally, significant differences were observed in pre to post-auditory measures between the two groups. The experimental group showed a significant temporary threshold shift bilaterally at 4000 Hz (P < 0.05), and a significant decrease in the amplitude of transient-evoked otoacoustic emission response in both ears (P < 0.05) after exposure to the jazz ensemble-based instructional activity. No significant changes were found in the control group between pre- and post-exposure measures. This study quantified the noise exposure in jazz band-based practice sessions and its effects on basic auditory measures. Temporary, yet significant, auditory changes seen in music students place them at risk for hearing loss compared to their non-music cohorts.

Measures of Quantum Synchronization in Continuous Variable Systems

NASA Astrophysics Data System (ADS)

Mari, A.; Farace, A.; Didier, N.; Giovannetti, V.; Fazio, R.

2013-09-01

We introduce and characterize two different measures which quantify the level of synchronization of coupled continuous variable quantum systems. The two measures allow us to extend to the quantum domain the notions of complete and phase synchronization. The Heisenberg principle sets a universal bound to complete synchronization. The measure of phase synchronization is, in principle, unbounded; however, in the absence of quantum resources (e.g., squeezing) the synchronization level is bounded below a certain threshold. We elucidate some interesting connections between entanglement and synchronization and, finally, discuss an application based on quantum optomechanical systems.

Measures of quantum synchronization in continuous variable systems.

PubMed

Mari, A; Farace, A; Didier, N; Giovannetti, V; Fazio, R

2013-09-06

We introduce and characterize two different measures which quantify the level of synchronization of coupled continuous variable quantum systems. The two measures allow us to extend to the quantum domain the notions of complete and phase synchronization. The Heisenberg principle sets a universal bound to complete synchronization. The measure of phase synchronization is, in principle, unbounded; however, in the absence of quantum resources (e.g., squeezing) the synchronization level is bounded below a certain threshold. We elucidate some interesting connections between entanglement and synchronization and, finally, discuss an application based on quantum optomechanical systems.

Self-Determination, Success, and College Readiness of First Generation Students in a Higher Education Institution

ERIC Educational Resources Information Center

Ochoa, Manuel

2012-01-01

The purpose of the study was to describe and compare if self-determination factors differed in first and non-first generation college students and success levels. Additionally, comparisons of college readiness levels were measured, and finally a measure of factors that contribute to college success based in first and second semester grade point…

Bistatic scattering from submerged unexploded ordnance lying on a sediment.

PubMed

Bucaro, J A; Simpson, H; Kraus, L; Dragonette, L R; Yoder, T; Houston, B H

2009-11-01

The broadband bistatic target strengths (TSs) of two submerged unexploded ordnance (UXO) targets have been measured in the NRL sediment pool facility. The targets-a 5 in. rocket and a 155 mm projectile-were among the targets whose monostatic TSs were measured and reported previously by the authors. Bistatic TS measurements were made for 0 degrees (target front) and 90 degrees (target side) incident source directions, and include both backscattered and forward scattered echo angles over a complete 360 degrees with the targets placed proud of the sediment surface. For the two source angles used, each target exhibits two strong highlights: a backscattered specular-like echo and a forward scattered response. The TS levels of the former are shown to agree reasonably well with predictions, based on scattering from rigid disks and cylinders, while the levels of the latter with predictions from radar cross section models, based on simple geometric optics appropriately modified. The bistatic TS levels observed for the proud case provide comparable or higher levels of broadband TS relative to free-field monostatic measurements. It is concluded that access to bistatic echo information in operations aimed at detecting submerged UXO targets could provide an important capability.

Performance-based measures and behavioral ratings of executive function in diagnosing attention-deficit/hyperactivity disorder in children.

PubMed

Tan, Alexander; Delgaty, Lauren; Steward, Kayla; Bunner, Melissa

2018-04-16

Deficits in real-world executive functioning (EF) are a frequent characteristic of attention-deficit/hyperactivity disorder (ADHD). However, the predictive value of using performance-based and behavioral rating measures of EF when diagnosing ADHD remains unclear. The current study investigates the use of performance-based EF measures and a parent-report questionnaire with established ecological validity and clinical utility when diagnosing ADHD. Participants included 21 healthy controls, 21 ADHD-primary inattentive, and 21 ADHD-combined type subjects aged 6-15 years. A brief neuropsychological battery was administered to each subject including common EF assessment measures. Significant differences were not found between groups on most performance-based EF measures, whereas significant differences (p < 0.05) were found on most parent-report behavioral rating scales. Furthermore, performance-based measures did not predict group membership above chance levels. Results further support differences in predictive value of EF performance-based measures compared to parent-report questionnaires when diagnosing ADHD. Further research must investigate the relationship between performance-based and behavioral rating measures when assessing EF in ADHD.

Assessing Text Readability Using Cognitively Based Indices

ERIC Educational Resources Information Center

Crossley, Scott A.; Greenfield, Jerry; McNamara, Danielle S.

2008-01-01

Many programs designed to compute the readability of texts are narrowly based on surface-level linguistic features and take too little account of the processes which a reader brings to the text. This study is an exploratory examination of the use of Coh-Metrix, a computational tool that measures cohesion and text difficulty at various levels of…

Multi-Level Assessment of Scientific Content Knowledge Gains Associated with Socioscientific Issues-Based Instruction

ERIC Educational Resources Information Center

Klosterman, Michelle L.; Sadler, Troy D.

2010-01-01

This study explored the impact of using a socioscientific issue (SSI) based curriculum on developing science content knowledge. Using a multi-level assessment design, student content knowledge gains were measured before and after implementation of a three-week unit on global warming (a prominent SSI) that explored both the relevant science content…

Liquid level sensor based on an excessively tilted fibre grating

NASA Astrophysics Data System (ADS)

Mou, Chengbo; Zhou, Kaiming; Yan, Zhijun; Fu, Hongyan; Zhang, Lin

2013-09-01

We propose and demonstrate an optical liquid level sensor based on the surrounding medium refractive index (SRI) sensing using an excessively tilted fibre grating (ETFG). When the ETFG submerged in water, two sets of cladding modes are coupled, corresponding to air- and water-surrounded grating structures, respectively. The coupling strengths of the two sets of cladding modes evolve with the submerging length of the grating, providing a mechanism to measure the liquid level. Comparing with long-period fibre grating based liquid level sensor, the ETFG sensor has a much higher SRI responsivity for liquids with refractive index around 1.33 and a lower thermal cross sensitivity.

Determining Coastal Mean Dynamic Topography by Geodetic Methods

NASA Astrophysics Data System (ADS)

Huang, Jianliang

2017-11-01

In geodesy, coastal mean dynamic topography (MDT) was traditionally determined by spirit leveling technique. Advances in navigation satellite positioning (e.g., GPS) and geoid determination enable space-based leveling with an accuracy of about 3 cm at tide gauges. Recent CryoSat-2, a satellite altimetry mission with synthetic aperture radar (SAR) and SAR interferometric measurements, extends the space-based leveling to the coastal ocean with the same accuracy. However, barriers remain in applying the two space-based geodetic methods for MDT determination over the coastal ocean because current geoid modeling focuses primarily on land as a substitute to spirit leveling to realize the vertical datum.

Method and apparatus for in-situ detection and isolation of aircraft engine faults

NASA Technical Reports Server (NTRS)

Bonanni, Pierino Gianni (Inventor); Brunell, Brent Jerome (Inventor)

2007-01-01

A method for performing a fault estimation based on residuals of detected signals includes determining an operating regime based on a plurality of parameters, extracting predetermined noise standard deviations of the residuals corresponding to the operating regime and scaling the residuals, calculating a magnitude of a measurement vector of the scaled residuals and comparing the magnitude to a decision threshold value, extracting an average, or mean direction and a fault level mapping for each of a plurality of fault types, based on the operating regime, calculating a projection of the measurement vector onto the average direction of each of the plurality of fault types, determining a fault type based on which projection is maximum, and mapping the projection to a continuous-valued fault level using a lookup table.

Exercise Performance Measurement with Smartphone Embedded Sensor for Well-Being Management

PubMed Central

Liu, Chung-Tse; Chan, Chia-Tai

2016-01-01

Regular physical activity reduces the risk of many diseases and improves physical and mental health. However, physical inactivity is widespread globally. Improving physical activity levels is a global concern in well-being management. Exercise performance measurement systems have the potential to improve physical activity by providing feedback and motivation to users. We propose an exercise performance measurement system for well-being management that is based on the accumulated activity effective index (AAEI) and incorporates a smartphone-embedded sensor. The proposed system generates a numeric index that is based on users’ exercise performance: their level of physical activity and number of days spent exercising. The AAEI presents a clear number that can serve as a useful feedback and goal-setting tool. We implemented the exercise performance measurement system by using a smartphone and conducted experiments to assess the feasibility of the system and investigated the user experience. We recruited 17 participants for validating the feasibility of the measurement system and a total of 35 participants for investigating the user experience. The exercise performance measurement system showed an overall precision of 88% in activity level estimation. Users provided positive feedback about their experience with the exercise performance measurement system. The proposed system is feasible and has a positive effective on well-being management. PMID:27727188

Exercise Performance Measurement with Smartphone Embedded Sensor for Well-Being Management.

PubMed

Liu, Chung-Tse; Chan, Chia-Tai

2016-10-11

Regular physical activity reduces the risk of many diseases and improves physical and mental health. However, physical inactivity is widespread globally. Improving physical activity levels is a global concern in well-being management. Exercise performance measurement systems have the potential to improve physical activity by providing feedback and motivation to users. We propose an exercise performance measurement system for well-being management that is based on the accumulated activity effective index (AAEI) and incorporates a smartphone-embedded sensor. The proposed system generates a numeric index that is based on users' exercise performance: their level of physical activity and number of days spent exercising. The AAEI presents a clear number that can serve as a useful feedback and goal-setting tool. We implemented the exercise performance measurement system by using a smartphone and conducted experiments to assess the feasibility of the system and investigated the user experience. We recruited 17 participants for validating the feasibility of the measurement system and a total of 35 participants for investigating the user experience. The exercise performance measurement system showed an overall precision of 88% in activity level estimation. Users provided positive feedback about their experience with the exercise performance measurement system. The proposed system is feasible and has a positive effective on well-being management.

Measuring Pilot Workload in a Moving-base Simulator. Part 2: Building Levels of Workload

NASA Technical Reports Server (NTRS)

Kantowitz, B. H.; Hart, S. G.; Bortolussi, M. R.; Shively, R. J.; Kantowitz, S. C.

1984-01-01

Pilot behavior in flight simulators often use a secondary task as an index of workload. His routine to regard flying as the primary task and some less complex task as the secondary task. While this assumption is quite reasonable for most secondary tasks used to study mental workload in aircraft, the treatment of flying a simulator through some carefully crafted flight scenario as a unitary task is less justified. The present research acknowledges that total mental workload depends upon the specific nature of the sub-tasks that a pilot must complete as a first approximation, flight tasks were divided into three levels of complexity. The simplest level (called the Base Level) requires elementary maneuvers that do not utilize all the degrees of freedom of which an aircraft, or a moving-base simulator; is capable. The second level (called the Paired Level) requires the pilot to simultaneously execute two Base Level tasks. The third level (called the Complex Level) imposes three simultaneous constraints upon the pilot.

Thunderstorms and ground-based radio noise as observed by radio astronomy Explorer 1

NASA Technical Reports Server (NTRS)

Caruso, J. A.; Herman, J. R.

1973-01-01

Radio Astronomy Explorer (RAE) data were analyzed to determine the frequency dependence of HF terrestrial radio noise power. RAE observations of individual thunderstorms, mid-ocean areas, and specific geographic regions for which concommitant ground based measurements are available indicate that noise power is a monotonically decreasing function of frequency which conforms to expectations over the geographic locations and time periods investigated. In all cases investigated, active thunderstorm regions emit slightly higher power as contrasted to RAE observations of the region during meteorologically quiet periods. Noise levels are some 15 db higher than predicted values over mid-ocean, while in locations where ground based measurements are available a maximum deviation of 5 db occurs. Worldwide contour mapping of the noise power at 6000 km for five individual months and four observing frequencies, examples of which are given, indicate high noise levels over continental land masses with corresponding lower levels over ocean regions.

Evaluation of the capabilities of satellite imagery for monitoring regional air pollution episodes

NASA Technical Reports Server (NTRS)

Barnes, J. C.; Bowley, C. J.; Burke, H. H. K.

1979-01-01

A comparative analysis of satellite visible channel imagery and ground based aerosol measurements is carried out for three cases representing a significant pollution episodes based on low surface visibility and high sulfate levels. The feasibility of detecting pollution episodes from space is also investigated using a simulation model. The model results are compared to quantitative information derived from digitized satellite data. The results show that when levels are or = 30 micrograms/cu, a haze pattern that correlates closely with the area of reported low surface visibilities and high micrograms sulfate levels can be detected in satellite visible channel imagery. The model simulation demonstrates the potential of the satellite to monitor the magnitude and areal extent of pollution episodes. Quantitative information on total aerosol amount derived from the satellite digitized data using the atmospheric radiative transfer model agrees well with the results obtained from the ground based measurements.

Measuring body structures and body functions from the International Classification of Functioning, Disability, and Health perspective: considerations for biomedical parameters in spinal cord injury research.

PubMed

Eriks-Hoogland, Inge E; Brinkhof, Martin W G; Al-Khodairy, Abdul; Baumberger, Michael; Brechbühl, Jörg; Curt, Armin; Mäder, Mark; Stucki, Gerold; Post, Marcel W M

2011-11-01

The aims of this study were to provide a selection of biomedical domains based on the comprehensive International Classification of Functioning, Disability, and Health (ICF) core sets for spinal cord injury (SCI) and to present an overview of the corresponding measurement instruments. Based on the Biomedical Domain Set, the SCI literature, the International Spinal Cord Society international data sets, and the Spinal Cord Injury Rehabilitation Evidence project publications were used to derive category specifications for use in SCI research. Expert opinion was used to derive a priority selection. The same sources were used to determine candidate measurement instruments for the specification of body functions and body structures using an example, and guiding principles were applied to select the most appropriate biomedical measurement instrument(s) for use in an SCI research project. Literature searches were performed for 41 second-level ICF body functions categories and for four second-level ICF body structures categories. For some of these categories, only a few candidate measurement instruments were found with limited variation in the type of measurement instruments. An ICF-based measurement set for biomedical aspects of functioning with SCI was established. For some categories of the ICF core sets for SCI, there is a need to develop measurement instruments.

High-k shallow traps observed by charge pumping with varying discharging times

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ho, Szu-Han; Chen, Ching-En; Tseng, Tseung-Yuen

2013-11-07

In this paper, we investigate the influence of falling time and base level time on high-k bulk shallow traps measured by charge pumping technique in n-channel metal-oxide-semiconductor field-effect transistors with HfO{sub 2}/metal gate stacks. N{sub T}-V{sub high} {sub level} characteristic curves with different duty ratios indicate that the electron detrapping time dominates the value of N{sub T} for extra contribution of I{sub cp} traps. N{sub T} is the number of traps, and I{sub cp} is charge pumping current. By fitting discharge formula at different temperatures, the results show that extra contribution of I{sub cp} traps at high voltage are inmore » fact high-k bulk shallow traps. This is also verified through a comparison of different interlayer thicknesses and different Ti{sub x}N{sub 1−x} metal gate concentrations. Next, N{sub T}-V{sub high} {sub level} characteristic curves with different falling times (t{sub falling} {sub time}) and base level times (t{sub base} {sub level}) show that extra contribution of I{sub cp} traps decrease with an increase in t{sub falling} {sub time}. By fitting discharge formula for different t{sub falling} {sub time}, the results show that electrons trapped in high-k bulk shallow traps first discharge to the channel and then to source and drain during t{sub falling} {sub time}. This current cannot be measured by the charge pumping technique. Subsequent measurements of N{sub T} by charge pumping technique at t{sub base} {sub level} reveal a remainder of electrons trapped in high-k bulk shallow traps.« less

Potentiometric Surface of the Magothy Aquifer in Southern Maryland, September 2009

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2010-01-01

This report presents a map showing the potentiometric surface of the Magothy aquifer in the Magothy Formation of Late Cretaceous age in Southern Maryland during September 2009. The map is based on water-level measurements in 66 wells. The highest measured water level was 85 feet above sea level near the northern boundary and outcrop area of the aquifer in the north-central part of Anne Arundel County. The potentiometric surface declined towards the south. Local hydraulic gradients were directed toward the center of a cone of depression in the Waldorf area that developed in response to pumping. Measured groundwater levels were as low as 71 feet below sea level in the Waldorf area. The map also shows well yield in gallons per day for 2008 at wells or well fields.

Changes in biologically active ultraviolet radiation reaching the Earth's surface.

PubMed

Madronich, S; McKenzie, R L; Björn, L O; Caldwell, M M

1998-10-01

Stratospheric ozone levels are near their lowest point since measurements began, so current ultraviolet-B (UV-B) radiation levels are thought to be close to their maximum. Total stratospheric content of ozone-depleting substances is expected to reach a maximum before the year 2000. All other things being equal, the current ozone losses and related UV-B increases should be close to their maximum. Increases in surface erythemal (sunburning) UV radiation relative to the values in the 1970s are estimated to be: about 7% at Northern Hemisphere mid-latitudes in winter/spring; about 4% at Northern Hemisphere mid-latitudes in summer/fall; about 6% at Southern Hemisphere mid-latitudes on a year-round basis; about 130% in the Antarctic in spring; and about 22% in the Arctic in spring. Reductions in atmospheric ozone are expected to result in higher amounts of UV-B radiation reaching the Earth's surface. The expected correlation between increases in surface UV-B radiation and decreases in overhead ozone has been further demonstrated and quantified by ground-based instruments under a wide range of conditions. Improved measurements of UV-B radiation are now providing better geographical and temporal coverage. Surface UV-B radiation levels are highly variable because of cloud cover, and also because of local effects including pollutants and surface reflections. These factors usually decrease atmospheric transmission and therefore the surface irradiances at UV-B as well as other wavelengths. Occasional cloud-induced increases have also been reported. With a few exceptions, the direct detection of UV-B trends at low- and mid-latitudes remains problematic due to this high natural variability, the relatively small ozone changes, and the practical difficulties of maintaining long-term stability in networks of UV-measuring instruments. Few reliable UV-B radiation measurements are available from pre-ozone-depletion days. Satellite-based observations of atmospheric ozone and clouds are being used, together with models of atmospheric transmission, to provide global coverage and long-term estimates of surface UV-B radiation. Estimates of long-term (1979-1992) trends in zonally averaged UV irradiances that include cloud effects are nearly identical to those for clear-sky estimates, providing evidence that clouds have not influenced the UV-B trends. However, the limitations of satellite-derived UV estimates should be recognized. To assess uncertainties inherent in this approach, additional validations involving comparisons with ground-based observations are required. Direct comparisons of ground-based UV-B radiation measurements between a few mid-latitude sites in the Northern and Southern Hemispheres have shown larger differences than those estimated using satellite data. Ground-based measurements show that summertime erythemal UV irradiances in the Southern Hemisphere exceed those at comparable latitudes of the Northern Hemisphere by up to 40%, whereas corresponding satellite-based estimates yield only 10-15% differences. Atmospheric pollution may be a factor in this discrepancy between ground-based measurements and satellite-derived estimates. UV-B measurements at more sites are required to determine whether the larger observed differences are globally representative. High levels of UV-B radiation continue to be observed in Antarctica during the recurrent spring-time ozone hole. For example, during ozone-hole episodes, measured biologically damaging radiation at Palmer Station, Antarctica (64 degrees S) has been found to approach and occasionally even exceed maximum summer values at San Diego, CA, USA (32 degrees N). Long-term predictions of future UV-B levels are difficult and uncertain. Nevertheless, current best estimates suggest that a slow recovery to pre-ozone depletion levels may be expected during the next half-century. (ABSTRACT TRUNCATED)

Smartphone-based noise mapping: Integrating sound level meter app data into the strategic noise mapping process.

PubMed

Murphy, Enda; King, Eoin A

2016-08-15

The strategic noise mapping process of the EU has now been ongoing for more than ten years. However, despite the fact that a significant volume of research has been conducted on the process and related issues there has been little change or innovation in how relevant authorities and policymakers are conducting the process since its inception. This paper reports on research undertaken to assess the possibility for smartphone-based noise mapping data to be integrated into the traditional strategic noise mapping process. We compare maps generated using the traditional approach with those generated using smartphone-based measurement data. The advantage of the latter approach is that it has the potential to remove the need for exhaustive input data into the source calculation model for noise prediction. In addition, the study also tests the accuracy of smartphone-based measurements against simultaneous measurements taken using traditional sound level meters in the field. Copyright © 2016 Elsevier B.V. All rights reserved.

Family, Community and Clinic Collaboration to Treat Overweight and Obese Children: Stanford GOALS -- a Randomized Controlled Trial of a Three-Year, Multi-Component, Multi-Level, Multi-Setting Intervention

PubMed Central

Robinson, Thomas N.; Matheson, Donna; Desai, Manisha; Wilson, Darrell M.; Weintraub, Dana L.; Haskell, William L.; McClain, Arianna; McClure, Samuel; Banda, Jorge; Sanders, Lee M.; Haydel, K. Farish; Killen, Joel D.

2013-01-01

Objective To test the effects of a three-year, community-based, multi-component, multi-level, multi-setting (MMM) approach for treating overweight and obese children. Design Two-arm, parallel group, randomized controlled trial with measures at baseline, 12, 24, and 36 months after randomization. Participants Seven through eleven year old, overweight and obese children (BMI ≥ 85th percentile) and their parents/caregivers recruited from community locations in low-income, primarily Latino neighborhoods in Northern California. Interventions Families are randomized to the MMM intervention versus a community health education active-placebo comparison intervention. Interventions last for three years for each participant. The MMM intervention includes a community-based after school team sports program designed specifically for overweight and obese children, a home-based family intervention to reduce screen time, alter the home food/eating environment, and promote self-regulatory skills for eating and activity behavior change, and a primary care behavioral counseling intervention linked to the community and home interventions. The active-placebo comparison intervention includes semi-annual health education home visits, monthly health education newsletters for children and for parents/guardians, and a series of community-based health education events for families. Main Outcome Measure Body mass index trajectory over the three-year study. Secondary outcome measures include waist circumference, triceps skinfold thickness, accelerometer-measured physical activity, 24-hour dietary recalls, screen time and other sedentary behaviors, blood pressure, fasting lipids, glucose, insulin, hemoglobin A1c, C-reactive protein, alanine aminotransferase, and psychosocial measures. Conclusions The Stanford GOALS trial is testing the efficacy of a novel community-based multi-component, multi-level, multi-setting treatment for childhood overweight and obesity in low-income, Latino families. PMID:24028942

A flexible and cost-effective compensation method for leveling using large-scale coordinate measuring machines and its application in aircraft digital assembly

NASA Astrophysics Data System (ADS)

Deng, Zhengping; Li, Shuanggao; Huang, Xiang

2018-06-01

In the assembly process of large-size aerospace products, the leveling and horizontal alignment of large components are essential prior to the installation of an inertial navigation system (INS) and the final quality inspection. In general, the inherent coordinate systems of large-scale coordinate measuring devices are not coincident with the geodetic horizontal system, and a dual-axis compensation system is commonly required for the measurement of difference in heights. These compensation systems are expensive and dedicated designs for different devices at present. Considering that a large-size assembly site usually needs more than one measuring device, a compensation approach which is versatile for different devices would be a more convenient and economic choice for manufacturers. In this paper, a flexible and cost-effective compensation method is proposed. Firstly, an auxiliary measuring device called a versatile compensation fixture (VCF) is designed, which mainly comprises reference points for coordinate transformation and a dual-axis inclinometer, and a kind of network tighten points (NTPs) are introduced and temporarily deployed in the large measuring space to further reduce transformation error. Secondly, the measuring principle of height difference is studied, based on coordinate transformation theory and trigonometry while considering the effects of earth curvature, and the coordinate transformation parameters are derived by least squares adjustment. Thirdly, the analytical solution of leveling uncertainty is analyzed, based on which the key parameters of the VCF and the proper deployment of NTPs are determined according to the leveling accuracy requirement. Furthermore, the proposed method is practically applied to the assembly of a large helicopter by developing an automatic leveling and alignment system. By measuring four NTPs, the leveling uncertainty (2σ) is reduced by 29.4% to about 0.12 mm, compared with that without NTPs.

Electrical characterisation of SiGe heterojunction bipolar transistors and Si pseudo-HBTS

NASA Astrophysics Data System (ADS)

De Barros, O.; Le Tron, B.; Woods, R. C.; Giroult-Matlakowski, G.; Vincent, G.; Brémond, G.

1996-08-01

This paper reports an electrical characterisation of the emitter-base junction of Si pseudo-HBTs and SiGe HBTs fabricated in a CMOS compatible single polysilicon self-aligned process. From the reverse characteristics it appears that the definition of the emitter-base junction by plasma etching induces peripheral defects that increase the base current of the transistors. Deep level transient spectroscopy measurements show a deep level in the case of SiGe base, whose spatial origin is not fully determinate up to now.

Pilot task-based assessment of noise levels among firefighters.

PubMed

Neitzel, Rl; Hong, O; Quinlan, P; Hulea, R

2013-11-01

Over one million American firefighters are routinely exposed to various occupational hazards agents. While efforts have been made to identify and reduce some causes of injuries and illnesses among firefighters, relatively little has been done to evaluate and understand occupational noise exposures in this group. The purpose of this pilot study was to apply a task-based noise exposure assessment methodology to firefighting operations to evaluate potential noise exposure sources, and to use collected task-based noise levels to create noise exposure estimates for evaluation of risk of noise-induced hearing loss by comparison to the 8-hr and 24-hr recommended exposure limits (RELs) for noise of 85 and 80.3 dBA, respectively. Task-based noise exposures (n=100 measurements) were measured in three different fire departments (a rural department in Southeast Michigan and suburban and urban departments in Northern California). These levels were then combined with time-at-task information collected from firefighters to estimate 8-hr noise exposures for the rural and suburban fire departments (n=6 estimates for each department). Data from 24-hr dosimetry measurements and crude self-reported activity categories from the urban fire department (n=4 measurements) were used to create 24-hr exposure estimates to evaluate the bias associated with the task-based estimates. Task-based noise levels were found to range from 82-109 dBA, with the highest levels resulting from use of saws and pneumatic chisels. Some short (e.g., 30 min) sequences of common tasks were found to result in nearly an entire allowable daily exposure. The majority of estimated 8-hr and 24-hr exposures exceeded the relevant recommended exposure limit. Predicted 24-hr exposures showed substantial imprecision in some cases, suggesting the need for increased task specificity. The results indicate potential for overexposure to noise from a variety of firefighting tasks and equipment, and suggest a need for further exposure characterization and additional hearing loss prevention efforts. Firefighters may be at risk of noise-induced hearing loss, which can affect their fitness for duty and ability to respond effectively to emergencies. The results of this study suggest that additional efforts at hearing loss prevention among firefighters are warranted.

The relationship between patients' perception of the effects of neurofibromatosis type 2 and the domains of the Short Form-36.

PubMed

Neary, W J; Hillier, V F; Flute, T; Stephens, S D G; Ramsden, R T; Evans, D G R

2010-08-01

To investigate the relationship between those issues concerning quality of life in patients with neurofibromatosis type 2 (NF2) as identified by the closed set NF2 questionnaire and the eight norm-based measures and the physical component summary (PCS) and mental component summary (MCS) scores of the Short Form-36 (SF-36) Questionnaire. Postal questionnaire study. Questionnaires sent to subjects' home addresses. Eighty-seven adult subjects under the care of the Manchester Multidisciplinary NF2 Clinic were invited to participate. Sixty-two (71%) completed sets of closed set NF2 questionnaires and SF-36 questionnaires were returned. Subjects with NF2 scored less than the norm of 50 on both the physical component summary and mental component summary scores and the eight individual norm-based measures of the Short Form-36 questionnaire. Correlations (using Kendall's tau) were examined between patients' perceptions of their severity of difficulty with the following activities and the eight norm-based measures and the physical component summary and mental component summary scores of the Short Form-36 questionnaire: Communicating with spouse/significant other (N = 61). The correlation coefficients were significant at the 0.01 level for the mental component summary score, together with three of the norm-based scores [vitality (VT), social functioning and role emotional]. Social communication (N = 62). All 10 correlations were significant at the 0.01 or 0.001 level. Balance (N = 59). All 10 correlations were highly significant at the P < 0.001 level. Hearing difficulties (N = 61). All correlations were significant at either the 0.01 level or less apart from the mental component summary score and three of the norm-based scores (role physical, VT and mental health). Mood change (N = 61). All correlations were significant at the 0.01 level or less, apart from one norm-based score (role physical). The Short Form-36 questionnaire has allowed us to relate patients' perceptions of their difficulties, as identified by the closed set NF2 questionnaire, to the physical and mental domains measured by this validated and widely used scale, and has provided further insight into areas of functioning affected by NF2.

The Effect of Pre-Analytical Variability on the Measurement of MRM-MS-Based Mid- to High-Abundance Plasma Protein Biomarkers and a Panel of Cytokines

PubMed Central

Aguilar-Mahecha, Adriana; Kuzyk, Michael A.; Domanski, Dominik; Borchers, Christoph H.; Basik, Mark

2012-01-01

Blood sample processing and handling can have a significant impact on the stability and levels of proteins measured in biomarker studies. Such pre-analytical variability needs to be well understood in the context of the different proteomics platforms available for biomarker discovery and validation. In the present study we evaluated different types of blood collection tubes including the BD P100 tube containing protease inhibitors as well as CTAD tubes, which prevent platelet activation. We studied the effect of different processing protocols as well as delays in tube processing on the levels of 55 mid and high abundance plasma proteins using novel multiple-reaction monitoring-mass spectrometry (MRM-MS) assays as well as 27 low abundance cytokines using a commercially available multiplexed bead-based immunoassay. The use of P100 tubes containing protease inhibitors only conferred proteolytic protection for 4 cytokines and only one MRM-MS-measured peptide. Mid and high abundance proteins measured by MRM are highly stable in plasma left unprocessed for up to six hours although platelet activation can also impact the levels of these proteins. The levels of cytokines were elevated when tubes were centrifuged at cold temperature, while low levels were detected when samples were collected in CTAD tubes. Delays in centrifugation also had an impact on the levels of cytokines measured depending on the type of collection tube used. Our findings can help in the development of guidelines for blood collection and processing for proteomic biomarker studies. PMID:22701622

The effect of pre-analytical variability on the measurement of MRM-MS-based mid- to high-abundance plasma protein biomarkers and a panel of cytokines.

PubMed

Aguilar-Mahecha, Adriana; Kuzyk, Michael A; Domanski, Dominik; Borchers, Christoph H; Basik, Mark

2012-01-01

Blood sample processing and handling can have a significant impact on the stability and levels of proteins measured in biomarker studies. Such pre-analytical variability needs to be well understood in the context of the different proteomics platforms available for biomarker discovery and validation. In the present study we evaluated different types of blood collection tubes including the BD P100 tube containing protease inhibitors as well as CTAD tubes, which prevent platelet activation. We studied the effect of different processing protocols as well as delays in tube processing on the levels of 55 mid and high abundance plasma proteins using novel multiple-reaction monitoring-mass spectrometry (MRM-MS) assays as well as 27 low abundance cytokines using a commercially available multiplexed bead-based immunoassay. The use of P100 tubes containing protease inhibitors only conferred proteolytic protection for 4 cytokines and only one MRM-MS-measured peptide. Mid and high abundance proteins measured by MRM are highly stable in plasma left unprocessed for up to six hours although platelet activation can also impact the levels of these proteins. The levels of cytokines were elevated when tubes were centrifuged at cold temperature, while low levels were detected when samples were collected in CTAD tubes. Delays in centrifugation also had an impact on the levels of cytokines measured depending on the type of collection tube used. Our findings can help in the development of guidelines for blood collection and processing for proteomic biomarker studies.

Effective application of optical sensing technology for sustainable liquid level sensing and rainfall measurement

NASA Astrophysics Data System (ADS)

Afzal, Muhammad Hassan Bin

2015-05-01

Rainfall measurement is performed on regular basis to facilitate effectively the weather stations and local inhabitants. Different types of rain gauges are available with different measuring principle for rainfall measurement. In this research work, a novel optical rain sensor is designed, which precisely calculate the rainfall level according to rainfall intensity. This proposed optical rain sensor model introduced in this paper, which is basically designed for remote sensing of rainfall and it designated as R-ORMS (Remote Optical Rainfall Measurement sensor). This sensor is combination of some improved method of tipping bucket rain gauge and most of the optical hydreon rain sensor's principle. This optical sensor can detect the starting time and ending time of rain, rain intensity and rainfall level. An infrared beam from Light Emitting Diode (LED) through powerful convex lens can accurately determines the diameter of each rain drops by total internal reflection principle. Calculations of these accumulative results determine the rain intensity and rainfall level. Accurate rainfall level is determined by internal optical LED based sensor which is embedded in bucket wall. This internal sensor is also following the total internal reflection (TIR) principle and the Fresnel's law. This is an entirely novel design of optical sensing principle based rain sensor and also suitable for remote sensing rainfall level. The performance of this proposed sensor has been comprehensively compared with other sensors with similar attributes and it showed better and sustainable result. Future related works have been proposed at the end of this paper, to provide improved and enhanced performance of proposed novel rain sensor.

Curriculum-Based Measurement of Oral Reading: Quality of Progress Monitoring Outcomes

ERIC Educational Resources Information Center

Christ, Theodore J.; Zopluoglu, Cengiz; Long, Jeffery D.; Monaghen, Barbara D.

2012-01-01

Curriculum-based measurement of oral reading (CBM-R) is frequently used to set student goals and monitor student progress. This study examined the quality of growth estimates derived from CBM-R progress monitoring data. The authors used a linear mixed effects regression (LMER) model to simulate progress monitoring data for multiple levels of…

Curriculum-Based Measurement of Reading: Is 6 Weeks of Daily Progress Monitoring Enough?

ERIC Educational Resources Information Center

Thornblad, Shannon C.; Christ, Theodore J.

2014-01-01

Curriculum-based measurement of reading (CBM-R) is used in research and practice to estimate the level and trend of student achievement. Although there is limited empirical or psychometric support to guide CBM-R progress monitoring practices, derived trend estimates are used to inform a variety of educational decisions including evaluations of…

Can economic deprivation protect health? Paradoxical multilevel effects of poverty on Hispanic children's wheezing.

PubMed

Collins, Timothy W; Kim, Young-an; Grineski, Sara E; Clark-Reyna, Stephanie

2014-08-06

Prior research suggests that economic deprivation has a generally negative influence on residents' health. We employ hierarchical logistic regression modeling to test if economic deprivation presents respiratory health risks or benefits to Hispanic children living in the City of El Paso (Texas, USA) at neighborhood- and individual-levels, and whether individual-level health effects of economic deprivation vary based on neighborhood-level economic deprivation. Data come from the US Census Bureau and a population-based survey of El Paso schoolchildren. The dependent variable is children's current wheezing, an established respiratory morbidity measure, which is appropriate for use with economically-deprived children with an increased likelihood of not receiving a doctor's asthma diagnosis. Results reveal that economic deprivation (measured based on poverty status) at both neighborhood- and individual-levels is associated with reduced odds of wheezing for Hispanic children. A sensitivity analysis revealed similar significant effects of individual- and neighborhood-level poverty on the odds of doctor-diagnosed asthma. Neighborhood-level poverty did not significantly modify the observed association between individual-level poverty and Hispanic children's wheezing; however, greater neighborhood poverty tends to be more protective for poor (as opposed to non-poor) Hispanic children. These findings support a novel, multilevel understanding of seemingly paradoxical effects of economic deprivation on Hispanic health.

Can Economic Deprivation Protect Health? Paradoxical Multilevel Effects of Poverty on Hispanic Children’s Wheezing

PubMed Central

Collins, Timothy W.; Kim, Young-an; Grineski, Sara E.; Clark-Reyna, Stephanie

2014-01-01

Prior research suggests that economic deprivation has a generally negative influence on residents’ health. We employ hierarchical logistic regression modeling to test if economic deprivation presents respiratory health risks or benefits to Hispanic children living in the City of El Paso (Texas, USA) at neighborhood- and individual-levels, and whether individual-level health effects of economic deprivation vary based on neighborhood-level economic deprivation. Data come from the US Census Bureau and a population-based survey of El Paso schoolchildren. The dependent variable is children’s current wheezing, an established respiratory morbidity measure, which is appropriate for use with economically-deprived children with an increased likelihood of not receiving a doctor’s asthma diagnosis. Results reveal that economic deprivation (measured based on poverty status) at both neighborhood- and individual-levels is associated with reduced odds of wheezing for Hispanic children. A sensitivity analysis revealed similar significant effects of individual- and neighborhood-level poverty on the odds of doctor-diagnosed asthma. Neighborhood-level poverty did not significantly modify the observed association between individual-level poverty and Hispanic children’s wheezing; however, greater neighborhood poverty tends to be more protective for poor (as opposed to non-poor) Hispanic children. These findings support a novel, multilevel understanding of seemingly paradoxical effects of economic deprivation on Hispanic health. PMID:25101769

Blood glucose level reconstruction as a function of transcapillary glucose transport.

PubMed

Koutny, Tomas

2014-10-01

A diabetic patient occasionally undergoes a detailed monitoring of their glucose levels. Over the course of a few days, a monitoring system provides a detailed track of their interstitial fluid glucose levels measured in their subcutaneous tissue. A discrepancy in the blood and interstitial fluid glucose levels is unimportant because the blood glucose levels are not measured continuously. Approximately five blood glucose level samples are taken per day, and the interstitial fluid glucose level is usually measured every 5min. An increased frequency of blood glucose level sampling would cause discomfort for the patient; thus, there is a need for methods to estimate blood glucose levels from the glucose levels measured in subcutaneous tissue. The Steil-Rebrin model is widely used to describe the relationship between blood and interstitial fluid glucose dynamics. However, we measured glucose level patterns for which the Steil-Rebrin model does not hold. Therefore, we based our research on a different model that relates present blood and interstitial fluid glucose levels to future interstitial fluid glucose levels. Using this model, we derived an improved model for calculating blood glucose levels. In the experiments conducted, this model outperformed the Steil-Rebrin model while introducing no additional requirements for glucose sample collection. In subcutaneous tissue, 26.71% of the calculated blood glucose levels had absolute values of relative differences from smoothed measured blood glucose levels less than or equal to 5% using the Steil-Rebrin model. However, the same difference interval was encountered in 63.01% of the calculated blood glucose levels using the proposed model. In addition, 79.45% of the levels calculated with the Steil-Rebrin model compared with 95.21% of the levels calculated with the proposed model had 20% difference intervals. Copyright © 2014 Elsevier Ltd. All rights reserved.

Sexual networks: measuring sexual selection in structured, polyandrous populations.

PubMed

McDonald, Grant C; James, Richard; Krause, Jens; Pizzari, Tommaso

2013-03-05

Sexual selection is traditionally measured at the population level, assuming that populations lack structure. However, increasing evidence undermines this approach, indicating that intrasexual competition in natural populations often displays complex patterns of spatial and temporal structure. This complexity is due in part to the degree and mechanisms of polyandry within a population, which can influence the intensity and scale of both pre- and post-copulatory sexual competition. Attempts to measure selection at the local and global scale have been made through multi-level selection approaches. However, definitions of local scale are often based on physical proximity, providing a rather coarse measure of local competition, particularly in polyandrous populations where the local scale of pre- and post-copulatory competition may differ drastically from each other. These limitations can be solved by social network analysis, which allows us to define a unique sexual environment for each member of a population: 'local scale' competition, therefore, becomes an emergent property of a sexual network. Here, we first propose a novel quantitative approach to measure pre- and post-copulatory sexual selection, which integrates multi-level selection with information on local scale competition derived as an emergent property of networks of sexual interactions. We then use simple simulations to illustrate the ways in which polyandry can impact estimates of sexual selection. We show that for intermediate levels of polyandry, the proposed network-based approach provides substantially more accurate measures of sexual selection than the more traditional population-level approach. We argue that the increasing availability of fine-grained behavioural datasets provides exciting new opportunities to develop network approaches to study sexual selection in complex societies.

Ultrasound-Guided Regional Anesthesia Simulation Training: A Systematic Review.

PubMed

Chen, Xiao Xu; Trivedi, Vatsal; AlSaflan, AbdulHadi A; Todd, Suzanne Clare; Tricco, Andrea C; McCartney, Colin J L; Boet, Sylvain

Ultrasound-guided regional anesthesia (UGRA) has become the criterion standard of regional anesthesia practice. Ultrasound-guided regional anesthesia teaching programs often use simulation, and guidelines have been published to help guide URGA education. This systematic review aimed to examine the effectiveness of simulation-based education for the acquisition and maintenance of competence in UGRA. Studies identified in MEDLINE, EMBASE, CINAHL, Cochrane Central Register of Controlled Trials, and ERIC were included if they assessed simulation-based UGRA teaching with outcomes measured at Kirkpatrick level 2 (knowledge and skills), 3 (transfer of learning to the workplace), or 4 (patient outcomes). Two authors independently reviewed all identified references for eligibility, abstracted data, and appraised quality. After screening 176 citations and 45 full-text articles, 12 studies were included. Simulation-enhanced training improved knowledge acquisition (Kirkpatrick level 2) when compared with nonsimulation training. Seven studies measuring skill acquisition (Kirkpatrick level 2) found that simulation-enhanced UGRA training was significantly more effective than alternative teaching methods or no intervention. One study measuring transfer of learning into the clinical setting (Kirkpatrick level 3) found no difference between simulation-enhanced UGRA training and non-simulation-based training. However, this study was discontinued early because of technical challenges. Two studies examined patient outcomes (Kirkpatrick level 4), and one of these found that simulation-based UGRA training improved patient outcomes compared with didactic teaching. Ultrasound-guided regional anesthesia knowledge and skills significantly improved with simulation training. The acquired UGRA skills may be transferred to the clinical setting; however, further studies are required to confirm these changes translate to improved patient outcomes.

GPS-based exposure to greenness and walkability and accelerometry-based physical activity

PubMed Central

James, Peter; Hart, Jaime E.; Hipp, J. Aaron; Mitchell, Jonathan A.; Kerr, Jacqueline; Hurvitz, Philip M.; Glanz, Karen; Laden, Francine

2017-01-01

Background Physical inactivity is a risk factor for cancer that may be influenced by environmental factors. Indeed, dense and well-connected built environments and environments with natural vegetation may create opportunities for higher routine physical activity. However, studies have focused primarily on residential environments to define exposure and self-reported methods to estimate physical activity. The current study explores the momentary association between minute-level global positioning systems (GPS)-based greenness exposure and time-matched objectively measured physical activity. Methods Adult women were recruited from sites across the US. Participants wore a GPS device and accelerometer on the hip for 7 days to assess location and physical activity at minute-level epochs. GPS records were linked to 250m resolution satellite-based vegetation data and Census Block Group-level EPA Smart Location Database walkability data. Minute-level generalized additive mixed models were conducted to test for associations between GPS measures and accelerometer count data, accounting for repeated measures within participant and allowing for deviations from linearity using splines. Results Among 360 adult women (mean age of 55.3 ± 10.2 years), we observed positive nonlinear relationships between physical activity and both greenness and walkability. In exploratory analyses, the relationship between environmental factors and physical activity were strongest among those who were White, had higher incomes, and who were middle-aged. Conclusions Our results indicate that higher levels of physical activity occurred in areas with higher greenness and higher walkability. Impact Findings suggest that planning and design policies should focus on these environments to optimize opportunities for physical activity. PMID:28196848

Measuring ITS deployment and integration

DOT National Transportation Integrated Search

1999-01-01

A consistent and simple methodology was developed to assess both the level of deployment of individual ITS elements and the level of integration between these elements. This method is based on the metropolitan ITS infrastructure, a blueprint defined ...

Measurement of trace impurities in ultra pure hydrogen and deuterium at the parts-per-billion level using gas chromatography

NASA Astrophysics Data System (ADS)

Ganzha, V.; Ivshin, K.; Kammel, P.; Kravchenko, P.; Kravtsov, P.; Petitjean, C.; Trofimov, V.; Vasilyev, A.; Vorobyov, A.; Vznuzdaev, M.; Wauters, F.

2018-02-01

A series of muon experiments at the Paul Scherrer Institute in Switzerland deploy ultra-pure hydrogen active targets. A new gas impurity analysis technique was developed, based on conventional gas chromatography, with the capability to measure part-per-billion (ppb) traces of nitrogen and oxygen in hydrogen and deuterium. Key ingredients are a cryogenic admixture accumulation, a directly connected sampling system and a dedicated calibration setup. The dependence of the measured concentration on the sample volume was investigated, confirming that all impurities from the sample gas are collected in the accumulation column and measured with the gas chromatograph. The system was calibrated utilizing dynamic dilution of admixtures into the gas flow down to sub-ppb level concentrations. The total amount of impurities accumulated in the purification system during a three month long experimental run was measured and agreed well with the calculated amount based on the measured concentrations in the flow.

Trends in stratospheric minor constituents

NASA Technical Reports Server (NTRS)

Stolarski, R. S.; Chu, W. P.; Coffey, M. T.; Heaps, W. S.; Kaye, J. A.; Mccormick, M. P.; Zander, R.

1989-01-01

Photochemical models predict that increasing source gas concentrations are also expected to lead to changes in the concentrations of both catalytically active radical species (such as NO2, ClO, and OH) and inactive reservoir species (such as HNO3, HCl, and H2O). For simplicity, we will refer to all these as trace species. Those species that are expected to have increasing concentration levels are investigated. Additionally, the trace species concentration levels are monitored for unexpected changes on the basis of the measure increase in source gases. Carrying out these investigations is difficult due to the limited data base of measurements of stratospheric trace species. In situ measurements are made only infrequently, and there are few satelliteborne measurements, most over a time space insufficient for trend determination. Instead, ground-based measurements of column content must be used for many species, and interpretation is complicated by contributions from the troposphere or mesosphere or both. In this chapter, we examine existing measurements as published or tabulated.

Environmental Profile of a Community’s Health (EPOCH): An Ecometric Assessment of Measures of the Community Environment Based on Individual Perception

PubMed Central

Corsi, Daniel J.; Subramanian, S. V.; McKee, Martin; Li, Wei; Swaminathan, Sumathi; Lopez-Jaramillo, Patricio; Avezum, Alvaro; Lear, Scott A.; Dagenais, Gilles; Rangarajan, Sumathy; Teo, Koon; Yusuf, Salim; Chow, Clara K.

2012-01-01

Background Public health research has turned towards examining upstream, community-level determinants of cardiovascular disease risk factors. Objective measures of the environment, such as those derived from direct observation, and perception-based measures by residents have both been associated with health behaviours. However, current methods are generally limited to objective measures, often derived from administrative data, and few instruments have been evaluated for use in rural areas or in low-income countries. We evaluate the reliability of a quantitative tool designed to capture perceptions of community tobacco, nutrition, and social environments obtained from interviews with residents in communities in 5 countries. Methodology/ Principal Findings Thirteen measures of the community environment were developed from responses to questionnaire items from 2,360 individuals residing in 84 urban and rural communities in 5 countries (China, India, Brazil, Colombia, and Canada) in the Environmental Profile of a Community’s Health (EPOCH) study. Reliability and other properties of the community-level measures were assessed using multilevel models. High reliability (>0.80) was demonstrated for all community-level measures at the mean number of survey respondents per community (n = 28 respondents). Questionnaire items included in each scale were found to represent a common latent factor at the community level in multilevel factor analysis models. Conclusions/ Significance Reliable measures which represent aspects of communities potentially related to cardiovascular disease (CVD)/risk factors can be obtained using feasible sample sizes. The EPOCH instrument is suitable for use in different settings to explore upstream determinants of CVD/risk factors. PMID:22973446

Potentiometric Surface of the Aquia Aquifer in Southern Maryland, September 2009

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2010-01-01

This report presents a map showing the potentiometric surface of the Aquia aquifer in the Aquia Formation of Paleocene age in Southern Maryland during September 2009. The map is based on water-level measurements in 82 wells. The highest measured water level was 48 feet above sea level near the northern boundary and in the outcrop area of the aquifer in the central part of Anne Arundel County. Water levels also were above sea level in Kent County and northern Queen Anne's County. Water levels were below sea level south and east of these areas and in the remainder of the study area. The hydraulic gradient increased southeastward toward a cone of depression around well fields at Lexington Park and Solomons Island. The lowest measured water level was 145 feet below sea level at the center of a cone of depression at Lexington Park. The map also shows well yield in gallons per day for 2008 at wells or well fields.

Potentiometric Surface of the Upper Patapsco Aquifer in Southern Maryland, September 2007

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2009-01-01

This report presents a map showing the potentiometric surface of the upper Patapsco aquifer in the Patapsco Formation of Early Cretaceous age in Southern Maryland during September 2007. The map is based on water-level measurements in 50 wells. The highest measured water level was 120 feet above sea level near the northern boundary and outcrop area of the aquifer in northern Anne Arundel County. From this area, the potentiometric surface declined to the south toward a well field in the Annapolis-Arnold area, and from all directions toward four cones of depression. These cones are located in the Waldorf-La Plata area, Chalk Point-Prince Frederick area, Swan Point subdivision in southern Charles County, and the Lexington Park-St. Inigoes area. The lowest measured ground-water level was 44 feet below sea level at Arnold, 106 feet below sea level south of Waldorf, 54 feet below sea level at Swan Point, 59 feet below sea level at Chalk Point, and 58 feet below sea level at Lexington Park.

[Electormagnetic field of the mobile phone base station: case study].

PubMed

Bieńkowski, Paweł; Zubrzak, Bartłomiej; Surma, Robert

2011-01-01

The paper presents changes in the electromagnetic field intensity in a school building and its surrounding after the mobile phone base station installation on the roof of the school. The comparison of EMF intensity measured before the base station was launched (electromagnetic background measurement) and after starting its operation (two independent control measurements) is discussed. Analyses of measurements are presented and the authors also propose the method of the electromagnetic field distribution adjustment in the area of radiation antennas side lobe to reduce the intensity of the EMF level in the base station proximity. The presented method involves the regulation of the inclination. On the basis of the measurements, it was found that the EMF intensity increased in the building and its surroundings, but the values measured with wide margins meet the requirements of the Polish law on environmental protection.

Advanced optical smoke meters for jet engine exhaust measurement

NASA Technical Reports Server (NTRS)

Pitz, R. W.

1986-01-01

Smoke meters with increased sensitivity, improved accuracy, and rapid response are needed to measure the smoke levels emitted by modern jet engines. The standard soiled tape meter in current use is based on filtering, which yields long term averages and is insensitive to low smoke levels. Two new optical smoke meter techniques that promise to overcome these difficulties have been experimentally evaluated: modulated transmission (MODTRAN) and photothermal deflection spectroscopy (PDS). Both techniques are based on light absorption by smoke, which is closely related to smoke density. They are variations on direct transmission measurements which produce a modulated signal that can be easily measured with phase sensitive detection. The MODTRAN and PDS techniques were tested on low levels of smoke and diluted samples of NO2 in nitrogen, simulating light adsorption due to smoke. The results are evaluated against a set of ideal smoke meter criteria that include a desired smoke measurement range of 0.1 to 12 mg cu.m. (smoke numbers of 1 to 50) and a frequency response of 1 per second. The MODTRAN instrument is found to be inaccurate for smoke levels below 3 mg/cu.m. and is able to make a only about once every 20 seconds because of its large sample cell. The PDS instrument meets nearly all the characteristics of an ideal smoke meter: it has excellent sensitivity over a range of smoke levels from 0.1 to 20 mg/cu.m. (smoke numbers of 1 to 60) and good frequency response (1 per second).

[An optical-fiber-sensor-based spectrophotometer for soil non-metallic nutrient determination].

PubMed

He, Dong-xian; Hu, Juan-xiu; Lu, Shao-kun; He, Hou-yong

2012-01-01

In order to achieve rapid, convenient and efficient soil nutrient determination in soil testing and fertilizer recommendation, a portable optical-fiber-sensor-based spectrophotometer including immersed fiber sensor, flat field holographic concave grating, and diode array detector was developed for soil non-metallic nutrient determination. According to national standard of ultraviolet and visible spectrophotometer with JJG 178-2007, the wavelength accuracy and repeatability, baseline stability, transmittance accuracy and repeatability measured by the prototype instrument were satisfied with the national standard of III level; minimum spectral bandwidth, noise and excursion, and stray light were satisfied with the national standard of IV level. Significant linear relationships with slope of closing to 1 were found between the soil available nutrient contents including soil nitrate nitrogen, ammonia nitrogen, available phosphorus, available sulfur, available boron, and organic matter measured by the prototype instrument compared with that measured by two commercial single-beam-based and dual-beam-based spectrophotometers. No significant differences were revealed from the above comparison data. Therefore, the optical-fiber-sensor-based spectrophotometer can be used for rapid soil non-metallic nutrient determination with a high accuracy.

Integration of Web-based and PC-based clinical research databases.

PubMed

Brandt, C A; Sun, K; Charpentier, P; Nadkarni, P M

2004-01-01

We have created a Web-based repository or data library of information about measurement instruments used in studies of multi-factorial geriatric health conditions (the Geriatrics Research Instrument Library - GRIL) based upon existing features of two separate clinical study data management systems. GRIL allows browsing, searching, and selecting measurement instruments based upon criteria such as keywords and areas of applicability. Measurement instruments selected can be printed and/or included in an automatically generated standalone microcomputer database application, which can be downloaded by investigators for use in data collection and data management. Integration of database applications requires the creation of a common semantic model, and mapping from each system to this model. Various database schema conflicts at the table and attribute level must be identified and resolved prior to integration. Using a conflict taxonomy and a mapping schema facilitates this process. Critical conflicts at the table level that required resolution included name and relationship differences. A major benefit of integration efforts is the sharing of features and cross-fertilization of applications created for similar purposes in different operating environments. Integration of applications mandates some degree of metadata model unification.

Effects of empathy and conflict resolution strategies on psychophysiological arousal and satisfaction in romantic relationships.

PubMed

Perrone-McGovern, Kristin M; Oliveira-Silva, Patrícia; Simon-Dack, Stephanie; Lefdahl-Davis, Erin; Adams, David; McConnell, John; Howell, Desiree; Hess, Ryan; Davis, Andrew; Gonçalves, Oscar F

2014-03-01

The present research builds upon the extant literature as it assesses psychophysiological factors in relation to empathy, conflict resolution, and romantic relationship satisfaction. In this study, we examined physiological reactivity of individuals in the context of emotionally laden interactions with their romantic partners. Participants (N = 31) completed self-report measures and attended in-person data collection sessions with their romantic partners. Participants were guided through discussions of problems and strengths of their relationships in vivo with their partners while we measured participants' skin conductance level (SCL) and interbeat interval (IBI) of the heart. We hypothesized that participants' level of empathy towards their partners would be reflected by physiological arousal (as measured by SCL and IBI) and relationship satisfaction, such that higher levels of empathy would be linked to changes in physiological arousal and higher relationship satisfaction. Further, we hypothesized that differences would be found in physiological arousal (as measured by SCL and IBI) based on the type of conflict resolution strategy used by participants. Finally, we hypothesized that differences would be found in empathy towards partner and relationship satisfaction based on the type of conflict resolution strategies used by participants. Results partially supported hypotheses and were discussed in light of existing knowledge based on empirical and theoretical sources.

Conceptualizing and measuring demand for recreation on national forests: a review and synthesis.

Treesearch

Brian E. Garber-Yonts

2005-01-01

This analysis examines the problem of measuring demand for recreation on national forests and other public lands. Current measures of recreation demand in Forest Service resource assessments and planning emphasize population-level participation rates and activity-based economic values for visitor days. Alternative measures and definitions of recreation demand are...

Alcoholic ketoacidosis

MedlinePlus

Tests may include: Arterial blood gases (measures the acid/base balance and oxygen level in blood) Blood alcohol ... PA: Elsevier Saunders; 2014:chap 185. Seifter JL. Acid-base disorders. In: Goldman L, Schafer AI, eds. Goldman- ...

The Development of a Secondary-Level Solo Wind Instrument Performance Rubric Using the Multifaceted Rasch Partial Credit Measurement Model

ERIC Educational Resources Information Center

Wesolowski, Brian C.; Amend, Ross M.; Barnstead, Thomas S.; Edwards, Andrew S.; Everhart, Matthew; Goins, Quentin R.; Grogan, Robert J., III; Herceg, Amanda M.; Jenkins, S. Ira; Johns, Paul M.; McCarver, Christopher J.; Schaps, Robin E.; Sorrell, Gary W.; Williams, Jonathan D.

2017-01-01

The purpose of this study was to describe the development of a valid and reliable rubric to assess secondary-level solo instrumental music performance based on principles of invariant measurement. The research questions that guided this study included (1) What is the psychometric quality (i.e., validity, reliability, and precision) of a scale…

Characterization of Kerfless Linear Arrays Based on PZT Thick Film.

PubMed

Zawada, Tomasz; Bierregaard, Louise Moller; Ringgaard, Erling; Xu, Ruichao; Guizzetti, Michele; Levassort, Franck; Certon, Dominique

2017-09-01

Multielement transducers enabling novel cost-effective fabrication of imaging arrays for medical applications have been presented earlier. Due to the favorable low lateral coupling of the screen-printed PZT, the elements can be defined by the top electrode pattern only, leading to a kerfless design with low crosstalk between the elements. The thick-film-based linear arrays have proved to be compatible with a commercial ultrasonic scanner and to support linear array beamforming as well as phased array beamforming. The main objective of the presented work is to investigate the performance of the devices at the transducer level by extensive measurements of the test structures. The arrays have been characterized by several different measurement techniques. First, electrical impedance measurements on several elements in air and liquid have been conducted in order to support material parameter identification using the Krimholtz-Leedom-Matthaei model. It has been found that electromechanical coupling is at the level of 35%. The arrays have also been characterized by a pulse-echo system. The measured sensitivity is around -60 dB, and the fractional bandwidth is close to 60%, while the center frequency is about 12 MHz over the whole array. Finally, laser interferometry measurements have been conducted indicating very good displacement level as well as pressure. The in-depth characterization of the array structure has given insight into the performance parameters for the array based on PZT thick film, and the obtained information will be used to optimize the key parameters for the next generation of cost-effective arrays based on piezoelectric thick film.

Measuring electromagnetic fields (EMF) around wind turbines in Canada: is there a human health concern?

PubMed

McCallum, Lindsay C; Whitfield Aslund, Melissa L; Knopper, Loren D; Ferguson, Glenn M; Ollson, Christopher A

2014-02-15

The past five years has seen considerable expansion of wind power generation in Ontario, Canada. Most recently worries about exposure to electromagnetic fields (EMF) from wind turbines, and associated electrical transmission, has been raised at public meetings and legal proceedings. These fears have not been based on any actual measurements of EMF exposure surrounding existing projects but appear to follow from worries from internet sources and misunderstanding of the science. The study was carried out at the Kingsbridge 1 Wind Farm located near Goderich, Ontario, Canada. Magnetic field measurements were collected in the proximity of 15 Vestas 1.8 MW wind turbines, two substations, various buried and overhead collector and transmission lines, and nearby homes. Data were collected during three operational scenarios to characterize potential EMF exposure: 'high wind' (generating power), 'low wind' (drawing power from the grid, but not generating power) and 'shut off' (neither drawing, nor generating power). Background levels of EMF (0.2 to 0.3 mG) were established by measuring magnetic fields around the wind turbines under the 'shut off' scenario. Magnetic field levels detected at the base of the turbines under both the 'high wind' and 'low wind' conditions were low (mean = 0.9 mG; n = 11) and rapidly diminished with distance, becoming indistinguishable from background within 2 m of the base. Magnetic fields measured 1 m above buried collector lines were also within background (≤ 0.3 mG). Beneath overhead 27.5 kV and 500 kV transmission lines, magnetic field levels of up to 16.5 and 46 mG, respectively, were recorded. These levels also diminished rapidly with distance. None of these sources appeared to influence magnetic field levels at nearby homes located as close as just over 500 m from turbines, where measurements immediately outside of the homes were ≤ 0.4 mG. The results suggest that there is nothing unique to wind farms with respect to EMF exposure; in fact, magnetic field levels in the vicinity of wind turbines were lower than those produced by many common household electrical devices and were well below any existing regulatory guidelines with respect to human health.

Using compressive measurement to obtain images at ultra low-light-level

NASA Astrophysics Data System (ADS)

Ke, Jun; Wei, Ping

2013-08-01

In this paper, a compressive imaging architecture is used for ultra low-light-level imaging. In such a system, features, instead of object pixels, are imaged onto a photocathode, and then magnified by an image intensifier. By doing so, system measurement SNR is increased significantly. Therefore, the new system can image objects at ultra low-ligh-level, while a conventional system has difficulty. PCA projection is used to collect feature measurements in this work. Linear Wiener operator and nonlinear method based on FoE model are used to reconstruct objects. Root mean square error (RMSE) is used to quantify system reconstruction quality.

Development of a psychological test to measure ability-based emotional intelligence in the Indonesian workplace using an item response theory.

PubMed

Fajrianthi; Zein, Rizqy Amelia

2017-01-01

This study aimed to develop an emotional intelligence (EI) test that is suitable to the Indonesian workplace context. Airlangga Emotional Intelligence Test (Tes Kecerdasan Emosi Airlangga [TKEA]) was designed to measure three EI domains: 1) emotional appraisal, 2) emotional recognition, and 3) emotional regulation. TKEA consisted of 120 items with 40 items for each subset. TKEA was developed based on the Situational Judgment Test (SJT) approach. To ensure its psychometric qualities, categorical confirmatory factor analysis (CCFA) and item response theory (IRT) were applied to test its validity and reliability. The study was conducted on 752 participants, and the results showed that test information function (TIF) was 3.414 (ability level = 0) for subset 1, 12.183 for subset 2 (ability level = -2), and 2.398 for subset 3 (level of ability = -2). It is concluded that TKEA performs very well to measure individuals with a low level of EI ability. It is worth to note that TKEA is currently at the development stage; therefore, in this study, we investigated TKEA's item analysis and dimensionality test of each TKEA subset.

Larval salamander growth responds to enrichment of a nutrient poor headwater stream

Treesearch

Brent J. Johnson; J. Bruce Wallace; AmyD Rosemond; Wyatt F. Cross

2006-01-01

While many studies have measured effects of nutrient enrichment on higher trophic levels in grazing food webs, few such studies exist for detritus-based systems. We measured effects of nitrogen and...

Levelling VS. InSAR in Urban Underground Construction Monitoring. Case of la Sagrera Railway Station (barcelona, Spain).

NASA Astrophysics Data System (ADS)

Vázquez-Suñé, E.; Serrano-Juan, A.; Pujades, E.; Crosetto, M.

2016-12-01

Construction processes require monitoring to ensure safety and to control the new and existing structures. The most accurate and spread monitoring method to measure displacements is levelling, a point-like surveying technique that tipically allows for tens of discrete in-situ sub-millimetric measures per squared kilometer. Another emerging technique for mapping soil deformation is the Interferometric Synthetic Aperture Radar (InSAR), which is based on SAR images acquired from orbiting satellites. This remote sensing technique can provide better spatial point density than levelling, more extensive spatial coverage and cheaper acquisitions. This paper analyses, compares and discusses levelling and InSAR measurements when they are used to measure the soil deformation induced by the dewatering associated to underground constructions in urban areas. To do so, an experiment was performed in the future railway station of La Sagrera, Barcelona (Spain), in which levelling and InSAR were used to accurately quantify ground deformation by dewatering. Results showed that soil displacements measured by levelling and InSAR were not always consisting. InSAR measurements were more accurate with respect the soil deformation produced by the dewatering while levelling was really useful to determine the real impact of the construction on the nearby buildings.

A STUDY OF DISPLACEMENT-LEVEL DEPENDENCY OF VERTICAL STIFFNESS OF PILE - COMPARISONS BETWEEN STATIC LOADING TEST AND MEASUREMENTS DURING TRAIN PASSING -

NASA Astrophysics Data System (ADS)

Nihei, Tatsuya; Nishioka, Hidetoshi; Kawamura, Chikara; Nishimura, Masahiro; Edamatsu, Masayuki; Koda, Masayuki

In order to introduce the performance based design of pile foundation, vertical stiffness of pile is one of the important design factors. Although it had been es timated the vertical stiffness of pile had the displacement-level dependency, it had been not clarified. We compared the vertical stiffness of pile measured by two loading conditions at pile foundation of the railway viaduct. Firstly, we measured the vertical stiffness at static loading test under construction of the viaduct. Secondly, we measured the vertical stiffness at the time of train passing. So, we recognized that the extrapolation of the displacement level dependency in static loading test could evaluate the vertical stiffness of pile during train passing.

Methods for Evaluating Emotions Evoked by Food Experiences: A Literature Review

PubMed Central

Kaneko, Daisuke; Toet, Alexander; Brouwer, Anne-Marie; Kallen, Victor; van Erp, Jan B. F.

2018-01-01

Besides sensory characteristics of food, food-evoked emotion is a crucial factor in predicting consumer's food preference and therefore in developing new products. Many measures have been developed to assess food-evoked emotions. The aim of this literature review is (i) to give an exhaustive overview of measures used in current research and (ii) to categorize these methods along measurement level (physiological, behavioral, and cognitive) and emotional processing level (unconscious sensory, perceptual/early cognitive, and conscious/decision making) level. This 3 × 3 categorization may help researchers to compile a set of complementary measures (“toolbox”) for their studies. We included 101 peer-reviewed articles that evaluate consumer's emotions and were published between 1997 and 2016, providing us with 59 different measures. More than 60% of these measures are based on self-reported, subjective ratings and questionnaires (cognitive measurement level) and assess the conscious/decision-making level of emotional processing. This multitude of measures and their overrepresentation in a single category hinders the comparison of results across studies and building a complete multi-faceted picture of food-evoked emotions. We recommend (1) to use widely applied, validated measures only, (2) to refrain from using (highly correlated) measures from the same category but use measures from different categories instead, preferably covering all three emotional processing levels, and (3) to acquire and share simultaneously collected physiological, behavioral, and cognitive datasets to improve the predictive power of food choice and other models. PMID:29937744

Verification of Non-Invasive Blood Glucose Measurement Method Based on Pulse Wave Signal Detected by FBG Sensor System.

PubMed

Kurasawa, Shintaro; Koyama, Shouhei; Ishizawa, Hiroaki; Fujimoto, Keisaku; Chino, Shun

2017-11-23

This paper describes and verifies a non-invasive blood glucose measurement method using a fiber Bragg grating (FBG) sensor system. The FBG sensor is installed on the radial artery, and the strain (pulse wave) that is propagated from the heartbeat is measured. The measured pulse wave signal was used as a collection of feature vectors for multivariate analysis aiming to determine the blood glucose level. The time axis of the pulse wave signal was normalized by two signal processing methods: the shortest-time-cut process and 1-s-normalization process. The measurement accuracy of the calculated blood glucose level was compared with the accuracy of these signal processing methods. It was impossible to calculate a blood glucose level exceeding 200 mg/dL in the calibration curve that was constructed by the shortest-time-cut process. In the 1-s-normalization process, the measurement accuracy of the blood glucose level was improved, and a blood glucose level exceeding 200 mg/dL could be calculated. By verifying the loading vector of each calibration curve to calculate the blood glucose level with a high measurement accuracy, we found the gradient of the peak of the pulse wave at the acceleration plethysmogram greatly affected.

A-Level Results in Comprehensive Schools: The COMBSE Project, Year 1.

ERIC Educational Resources Information Center

Fitz-Gibbon, Carol T.

1985-01-01

Results of the first year of the ongoing Confidential, Measurement-Based, Self-Evaluation Project that examines variables related to A-level English and Mathematics achievement in 10 comprehensive schools in the United Kingdom are presented. A-level results were found to be strongly predicted by teacher assessments and by prior O-level achievement…

Adult Literacy. Cuyahoga County Data Brief

ERIC Educational Resources Information Center

Center on Urban Poverty and Community Development (NJ1), 2010

2010-01-01

There are no direct measures of adult literacy in Cuyahoga County. Instead, this report uses estimates based on a statistical model derived from the National Survey of Adult Literacy. Adult literacy levels range from Level 1 (the most basic) to Level 5 (the most complex). People with Level 1 literacy are at a severe disadvantage in the sense that…

Measuring Teacher Effectiveness through Hierarchical Linear Models: Exploring Predictors of Student Achievement and Truancy

ERIC Educational Resources Information Center

Subedi, Bidya Raj; Reese, Nancy; Powell, Randy

2015-01-01

This study explored significant predictors of student's Grade Point Average (GPA) and truancy (days absent), and also determined teacher effectiveness based on proportion of variance explained at teacher level model. We employed a two-level hierarchical linear model (HLM) with student and teacher data at level-1 and level-2 models, respectively.…

Sex based levels of C-reactive protein and white blood cell count in subjects with metabolic syndrome: Isfahan Healthy Heart Program.

PubMed

Gharipour, Mojgan; Ramezani, Mohammad Arash; Sadeghi, Masuomeh; Khosravi, Alireza; Masjedi, Mohsen; Khosravi-Boroujeni, Hossein; Rafieian-Kopaei, Mahmoud; Sarrafzadegan, Nizal

2013-06-01

C-reactive protein (CRP) and white blood cell (WBC) are proinflammatory markers. They are major pathophysiological for the development of metabolic syndrome (MetS). This study aimed to address the independent associations between MetS and WBC counts and serum CRP levels and evaluation of their magnitude in relation to the MetS, based on the sex in the Iranian adults. In this cross-sectional study, subjects who met the MetS criteria, based on the Adult Treatment Panel III were selected from the Isfahan Healthy Heart Program database. A questionnaire containing the demographic data, weight, height, waist, and hip circumference of the respondents was completed for each person. Blood pressure was measured and the anthropometric measurements were done, and fasting blood samples were taken for 2 h postload plasma glucose (2 hpp). Serum [total, high-density lipoprotein (HDL), and low-density lipoprotein] levels of cholesterol, triglyceride, and CRP as well as WBC counts were determined. The univariate analyses were carried out to assess the relation between the CRP levels, WBC counts with the MetS in both sexes the. In men with the abdominal obesity, the higher levels of WBC count, high serum triglyceride and blood glucose levels, a low serum HDL level, and raised systolic and diastolic blood pressure were observed. However, the higher serum CRP levels were only observed in those with the low serum HDL-cholesterol levels. The mean values of the WBC counts were statistically different between the men with and without MetS, but the mean values of the CRP levels were similar between the two groups. In women, the mean values of WBC count and CRP levels were statistically different in the subjects with and without a MetS components (except for the low serum HDL levels and high diastolic blood pressure for the WBC measures and abdominal obesity for the CRP measures) and for those with and without MetS. The age and smoking adjusted changes in the CRP levels and WBC counts correlated with the number of Mets components in the women. The findings of this study suggest substantial implications for the prevention and management of the MetS and atherosclerotic diseases, as these involve the suppression of inflammatory conditions rather than the incitement of anti-inflammatory conditions.

Measuring Socioeconomic Inequalities With Predicted Absolute Incomes Rather Than Wealth Quintiles: A Comparative Assessment Using Child Stunting Data From National Surveys.

PubMed

Fink, Günther; Victora, Cesar G; Harttgen, Kenneth; Vollmer, Sebastian; Vidaletti, Luís Paulo; Barros, Aluisio J D

2017-04-01

To compare the predictive power of synthetic absolute income measures with that of asset-based wealth quintiles in low- and middle-income countries (LMICs) using child stunting as an outcome. We pooled data from 239 nationally representative household surveys from LMICs and computed absolute incomes in US dollars based on households' asset rank as well as data on national consumption and inequality levels. We used multivariable regression models to compare the predictive power of the created income measure with the predictive power of existing asset indicator measures. In cross-country analysis, log absolute income predicted 54.5% of stunting variation observed, compared with 20% of variation explained by wealth quintiles. For within-survey analysis, we also found absolute income gaps to be predictive of the gaps between stunting in the wealthiest and poorest households (P < .001). Our results suggest that absolute income levels can greatly improve the prediction of stunting levels across and within countries over time, compared with models that rely solely on relative wealth quintiles.

Analysis of attitude and achievement using the 5E instructional model in an interactive television environment

NASA Astrophysics Data System (ADS)

Cherry, Gamaliel R.

The purpose of this quasi-experimental study was to examine attitude and achievement among fifth grade students participating in inquiry and lecture-based forms of instruction through interactive television. Participants (N = 260) were drawn from registered users of NASA's Digital Learning Network(TM). The first three levels of Bloom's Revised Taxonomy were used to measure levels of achievement while the Science Attitude Inventory II was used to measure science attitudes. Results indicated a significant interaction between inquiry and topic area, as well as achievement for remember, understand, and apply levels of Bloom's Revised Taxonomy. Differences between mean scores were in favor of the treatment group on both topic and achievement levels. Findings echo research that encourages the use of inquiry-based instruction to improve achievement. This study also serves as a reference for supplemental content providers searching for an effective instructional strategy when delivering instruction through interactive television. Recommendations for future research include the examination of: development time between inquiry-based and lecture-based strategies, a longitudinal study of attitude and achievement from elementary through middle school, differences between interactive television sessions and asynchronous sessions, and types of inquiry-based instruction related to student achievement and retention through interactive television.

USB environment measurements based on full-scale static engine ground tests. [Upper Surface Blowing for YC-14

NASA Technical Reports Server (NTRS)

Sussman, M. B.; Harkonen, D. L.; Reed, J. B.

1976-01-01

Flow turning parameters, static pressures, surface temperatures, surface fluctuating pressures and acceleration levels were measured in the environment of a full-scale upper surface blowing (USB) propulsive-lift test configuration. The test components included a flightworthy CF6-50D engine, nacelle and USB flap assembly utilized in conjunction with ground verification testing of the USAF YC-14 Advanced Medium STOL Transport propulsion system. Results, based on a preliminary analysis of the data, generally show reasonable agreement with predicted levels based on model data. However, additional detailed analysis is required to confirm the preliminary evaluation, to help delineate certain discrepancies with model data and to establish a basis for future flight test comparisons.

Designing Cognitive Complexity in Mathematical Problem-Solving Items

ERIC Educational Resources Information Center

Daniel, Robert C.; Embretson, Susan E.

2010-01-01

Cognitive complexity level is important for measuring both aptitude and achievement in large-scale testing. Tests for standards-based assessment of mathematics, for example, often include cognitive complexity level in the test blueprint. However, little research exists on how mathematics items can be designed to vary in cognitive complexity level.…

Potentiometric surface map of the Magothy aquifer in southern Maryland, September, 2003

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Wheeler, Judith C.

2005-01-01

This report presents a map showing the potentiometric surface of the Magothy aquifer in the Magothy Formation of Upper Cretaceous age in Southern Maryland during September 2002. The map is based on water-level measurements in 79 wells. The highest measured water level was 83 feet above sea level near the northern boundary and outcrop area of the aquifer in the north-central part of Anne Arundel County. The potentiometric surface declined towards the south and east. Local gradients were directed toward the centers of two cones of depression that developed in response to pumping. These cones of depression were centered around well fields in the Waldorf area and at the Chalk Point power plant. Measured ground-water levels were as low as 81 feet below sea level in the Waldorf area and 75 feet below sea level at Chalk Point.

Potentiometric Surface of the Magothy Aquifer in Southern Maryland, September 2002

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Wheeler, Judith C.

2003-01-01

This report presents a map showing the potentiometric surface of the Magothy aquifer in the Magothy Formation of Upper Cretaceous age in Southern Maryland during September 2002. The map is based on water-level measurements in 79 wells. The highest measured water level was 83 feet above sea level near the northern boundary and outcrop area of the aquifer in the north-central part of Anne Arundel County. The potentiometric surface declined towards the south and east. Local gradients were directed toward the centers of two cones of depression that developed in response to pumping. These cones of depression were centered around well fields in the Waldorf area and at the Chalk Point power plant. Measured ground-water levels were as low as 81 feet below sea level in the Waldorf area and 75 feet below sea level at Chalk Point.

Feasibility study of direct spectra measurements for Thomson scattered signals for KSTAR fusion-grade plasmas

NASA Astrophysics Data System (ADS)

Park, K.-R.; Kim, K.-h.; Kwak, S.; Svensson, J.; Lee, J.; Ghim, Y.-c.

2017-11-01

Feasibility study of direct spectra measurements of Thomson scattered photons for fusion-grade plasmas is performed based on a forward model of the KSTAR Thomson scattering system. Expected spectra in the forward model are calculated based on Selden function including the relativistic polarization correction. Noise in the signal is modeled with photon noise and Gaussian electrical noise. Electron temperature and density are inferred using Bayesian probability theory. Based on bias error, full width at half maximum and entropy of posterior distributions, spectral measurements are found to be feasible. Comparisons between spectrometer-based and polychromator-based Thomson scattering systems are performed with varying quantum efficiency and electrical noise levels.

An accurate laser radiometer for determining visible exposure times.

PubMed

Royston, D D

1985-01-01

A laser light radiometer has been developed for the Electro-Optics Branch of the Center for Devices and Radiological Health (CDRH). The radiometer measures direct laser radiation emitted in the visible spectrum. Based upon this measurement, the instrument's microprocessor automatically determines at what time duration the exposure to the measured laser radiation would exceed either the class I accessible emission limits of the Federal Performance Standard for laser products or the maximum permissible exposure limits of laser user safety standards. The instrument also features automatic background level compensation, pulse measurement capability, and self-diagnosis. Measurement of forward surface illumination levels preceding HpD photoradiation therapy is possible.

Theoretical Evaluation of Electromagnetic Emissions from GSM900 Mobile Telephony Base Stations in the West Bank and Gaza Strip-Palestine.

PubMed

Lahham, Adnan; Alkbash, Jehad Abu; ALMasri, Hussien

2017-04-20

Theoretical assessments of power density in far-field conditions were used to evaluate the levels of environmental electromagnetic frequencies from selected GSM900 macrocell base stations in the West Bank and Gaza Strip. Assessments were based on calculating the power densities using commercially available software (RF-Map from Telstra Research Laboratories-Australia). Calculations were carried out for single base stations with multiantenna systems and also for multiple base stations with multiantenna systems at 1.7 m above the ground level. More than 100 power density levels were calculated at different locations around the investigated base stations. These locations include areas accessible to the general public (schools, parks, residential areas, streets and areas around kindergartens). The maximum calculated electromagnetic emission level resulted from a single site was 0.413 μW cm-2 and found at Hizma town near Jerusalem. Average maximum power density from all single sites was 0.16 μW cm-2. The results of all calculated power density levels in 100 locations distributed over the West Bank and Gaza were nearly normally distributed with a peak value of ~0.01% of the International Commission on Non-Ionizing Radiation Protection's limit recommended for general public. Comparison between calculated and experimentally measured value of maximum power density from a base station showed that calculations overestimate the actual measured power density by ~27%. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Agile lensing-based non-contact liquid level optical sensor for extreme environments

NASA Astrophysics Data System (ADS)

Reza, Syed Azer; Riza, Nabeel A.

2010-09-01

To the best of the author's knowledge, demonstrated is the first opto-fluidic technology- based sensor for detection of liquid levels. An opto-fluidic Electronically Controlled Variable Focus Lens (ECVFL) is used to change the spatial intensity profile of the low power optical beam falling on the liquid surface. By observing, tuning and measuring the liquid surface reflected intensity profile to reach its smallest size, the liquid level is determined through a beam spot size versus ECVFL focal length calibration table. Using a 50 μW 632.8 nm laser wavelength liquid illuminating beam, a proof-of-concept sensor is tested using engine oil, vegetable oil, and detergent fluid with measured liquid levels over a 75 cm range. This non-contact Radio Frequency (RF) modulation-free sensor is particularly suited for hazardous fluids in window-accessed sealed containers including liquid carrying vessels in Electromagnetic Interference (EMI) rich environments.

Strength and deformation characteristics of pavements

NASA Astrophysics Data System (ADS)

Shook, J. F.; Kallas, B. F.; McCullough, B. F.; Taute, A.; Rada, G.; Witczak, M. W.; Heisey, J. S.; Stokoe, K. H.; Meyer, A. H.; Huffman, M. S.

The Colorado experimental base project was a full-scale field experment constructed with various thicknesses of two full depth hot mix sand asphalt beans, one full depth asphalt concrete base, and one thickness of a standard design with untreated base and subbase layers. Relative thicknesses of one asphalt concrete base, two hot mix sand asphalt bases, and one standard design with untreated base and subbase required to give an equal level of pavement performance were determined. Certain measured properties of the pavement and the pavement components were related to observed levels of performance by using both empirical and theoretical models for pavement behavior.

High-fidelity, low-cost, automated method to assess laparoscopic skills objectively.

PubMed

Gray, Richard J; Kahol, Kanav; Islam, Gazi; Smith, Marshall; Chapital, Alyssa; Ferrara, John

2012-01-01

We sought to define the extent to which a motion analysis-based assessment system constructed with simple equipment could measure technical skill objectively and quantitatively. An "off-the-shelf" digital video system was used to capture the hand and instrument movement of surgical trainees (beginner level = PGY-1, intermediate level = PGY-3, and advanced level = PGY-5/fellows) while they performed a peg transfer exercise. The video data were passed through a custom computer vision algorithm that analyzed incoming pixels to measure movement smoothness objectively. The beginner-level group had the poorest performance, whereas those in the advanced group generated the highest scores. Intermediate-level trainees scored significantly (p < 0.04) better than beginner trainees. Advanced-level trainees scored significantly better than intermediate-level trainees and beginner-level trainees (p < 0.04 and p < 0.03, respectively). A computer vision-based analysis of surgical movements provides an objective basis for technical expertise-level analysis with construct validity. The technology to capture the data is simple, low cost, and readily available, and it obviates the need for expert human assessment in this setting. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Potentiometric surface of the Upper Patapsco aquifer in southern Maryland, September 2009

USGS Publications Warehouse

Curtin, Stephen E.; Andreasen, David C.; Staley, Andrew W.

2010-01-01

This report presents a map showing the potentiometric surface of the upper Patapsco aquifer in the Patapsco Formation of Early Cretaceous age in Southern Maryland during September 2009. The map is based on water-level measurements in 65 wells. The highest measured water level was 118 feet above sea level near the northern boundary and outcrop area of the aquifer in northern Anne Arundel County. From this area, the potentiometric surface declined to the south toward a well field in the Annapolis-Arnold area, and from all directions toward three additional cones of depression. These cones are located in the Waldorf-La Plata area, Chalk Point, and the Leonardtown-Lexington Park area. The lowest measured groundwater levels were 26 feet below sea level at Annapolis, 108 feet below sea level south of Waldorf, 60 feet below sea level at Chalk Point, and 83 feet below sea level at Leonardtown. The map also shows well yield in gallons per day for 2008 at wells or well fields.

Sensitivity of measurement-based purification processes to inner interactions

NASA Astrophysics Data System (ADS)

Militello, Benedetto; Napoli, Anna

2018-02-01

The sensitivity of a repeated measurement-based purification scheme to additional undesired couplings is analyzed, focusing on the very simple and archetypical system consisting of two two-level systems interacting with a repeatedly measured one. Several regimes are considered and in the strong coupling limit (i.e., when the coupling constant of the undesired interaction is very large) the occurrence of a quantum Zeno effect is proven to dramatically jeopardize the efficiency of the purification process.

Implementation of the New Approach for the Dose-Response Functions Development for the Case of Athens and Greece

NASA Astrophysics Data System (ADS)

Christodoulakis, J.; Tzanis, C. G.; Varotsos, C. A.; Kouremadas, G.

2016-08-01

Dose-response functions (DRFs) are functions used for estimating corrosion and/or soiling levels of materials used in constructions and cultural monuments. In order to achieve this, DRFs lean on ground-based measurements of specific air pollution and climatic parameters like nitrogen oxides, ozone, temperature and others. In DRAGON 3 2015 Symposium we presented a new approach which proposed a technique for using satellite-based data for the necessary parameters instead of ground-based expanding in this way: a) the usage of DRFs in cases/areas where there is no availability of in situ measurements, b) the applicability of satellite-based data. In this work we present mapping results of deterioration levels (corrosion and soiling) for the case of Athens, Greece but also for the whole Greece country.

Depression and work performance: an ecological study using web-based screening.

PubMed

Harvey, S B; Glozier, N; Henderson, M; Allaway, S; Litchfield, P; Holland-Elliott, K; Hotopf, M

2011-05-01

Depression is reported to be a major cause of illness-related sub-optimal work performance (presenteeism). However, the majority of studies examining presenteeism have relied on self-report measures of work performance. Furthermore, employers currently face a number of practical challenges in attempting to facilitate early identification of depression. To test whether a web-based screening tool for depression could be used successfully in the workplace and whether it was possible to detect an association between rates of depression and objective measures of impaired workgroup performance. All permanent employees of a telecommunications company with UK-based call centres were encouraged to complete a web-based psychological assessment using the Patient Health Questionnaire depression scale (PHQ-9). In addition to confidential individual level results, the tool was able to provide anonymized summary statistics for each workgroup. Four objective measures of work performance were collected for each workgroup. During the study period, 1161 web-based PHQ-9 questionnaires were completed. There was a negative linear relationship between rates of depressive symptoms and the overall performance of a workgroup (P < 0.001). The linear relationship between depression and workgroup performance remained after controlling for gender balance, percent of temporary staff, employees' perceived level of engagement and satisfaction with their line manager (P < 0.01). Workgroups with high levels of depressive symptoms tend to perform poorly. Computer-aided web-based screening for symptoms of depression is feasible in a work setting.

Beyond Measurement-Driven Instruction: Achieving Deep Learning Based on Constructivist Learning Theory, Integrated Assessment, and a Flipped Classroom Approach

ERIC Educational Resources Information Center

Bernauer, James A.; Fuller, Richard G.

2017-01-01

The authors focus on the critical role of assessment within a flipped classroom environment where instruction is based on constructivist learning theory and where desired student outcomes are at the higher levels of Bloom's Taxonomy. While assessment is typically thought of in terms of providing summative measures of performance or achievement, it…

An Activity-Based Study on Providing Basic Knowledge and Skills of Measurement in Teaching

ERIC Educational Resources Information Center

Maral, Sahide; Oguz-Unver, Ayse; Yurumezoglu, Kemal

2012-01-01

Even though one of the prerequisites of inquiry-based science classes is acquiring measuring skills, there is not enough emphasis in the schools today on developing these skills. The current study, which has been designed with the thought that this situation may be caused by the fact that teachers do not have a sufficient level of measurement…

A General Approach to Measuring Test-Taking Effort on Computer-Based Tests

ERIC Educational Resources Information Center

Wise, Steven L.; Gao, Lingyun

2017-01-01

There has been an increased interest in the impact of unmotivated test taking on test performance and score validity. This has led to the development of new ways of measuring test-taking effort based on item response time. In particular, Response Time Effort (RTE) has been shown to provide an assessment of effort down to the level of individual…

Development of a measure of knowledge use by stakeholders in rehabilitation technology

PubMed Central

Nobrega, Amanda R; Lane, Joseph P; Tomita, Machiko R; Usiak, Douglas J; Lockett, Michelle M

2014-01-01

Objectives: Uptake of new knowledge by diverse and diffuse stakeholders of health-care technology innovations has been a persistent challenge, as has been measurement of this uptake. This article describes the development of the Level of Knowledge Use Survey instrument, a web-based measure of self-reported knowledge use. Methods: The Level of Knowledge Use Survey instrument was developed in the context of assessing effectiveness of knowledge communication strategies in rehabilitation technology. It was validated on samples representing five stakeholder types: researchers, manufacturers, clinician–practitioners, knowledge brokers, and consumers. Its structure is broadly based on Rogers’ stages of innovation adoption. Its item generation was initially guided by Hall et al’s Levels of Use framework. Item selection was based on content validity indices computed from expert ratings (n 1 = 4; n 2 = 3). Five representative stakeholders established usability of the web version. The version included 47 items (content validity index for individual items >0.78; content validity index for a scale or set of items >0.90) in self-reporting format. Psychometrics were then established for the version. Results: Analyses of data from small (n = 69) and large (n = 215) samples using the Level of Knowledge Use Survey instrument suggested a conceptual model of four levels of knowledge use—Non-awareness, Awareness, Interest, and Use. The levels covered eight dimensions and six user action categories. The sequential nature of levels was inconclusive due to low cell frequencies. The Level of Knowledge Use Survey instrument showed adequate content validity (≈ 0.88; n = 3) and excellent test–retest reliability (1.0; n = 69). It also demonstrated good construct validity (n = 215) for differentiating among new knowledge outputs (p < 0.001) and among stakeholder types (0.001 < p ≤ 0.013). It showed strong responsiveness to change between baseline and follow-up testing (0.001 < p ≤ 0.002; n = 215). Conclusion: The Level of Knowledge Use Survey instrument is valid and reliable for measuring uptake of innovations across diffuse stakeholders of rehabilitation technologies and therefore also for tracking changes in knowledge use. PMID:26770743

Radon exposures in a Jerusalem public school.

PubMed Central

Richter, E D; Neeman, E; Fischer, I; Berdugo, M; Westin, J B; Kleinstern, J; Margaliot, M

1997-01-01

In December 1995, ambient radon levels exceeding 10,000 Bq/m3 were measured in a basement shelter workroom of a multilevel East Talpiot, Jerusalem, public elementary school (six grades, 600 students). The measurements were taken after cancers (breast and multiple myeloma) were diagnosed in two workers who spent their workdays in basement rooms. The school was located on a hill that geologic maps show to be rich in phosphate deposits, which are a recognized source for radon gas and its daughter products. Levels exceeding 1000,000 Bq/m3 were measured at the mouth of a pipe in the basement shelter workroom, the major point of radon entry. The school was closed and charcoal and electret ion chamber detectors were used to carry out repeated 5-day measurements in all rooms in the multilevel building over a period of several months. Radon concentrations were generally higher in rooms in the four levels of the building that were below ground level. There were some ground-level rooms in the building in which levels reached up to 1300 Bq/m3. In rooms above ground level, however, peak levels did not exceed 300 Bq/m3. Exposure control based on sealing and positive pressure ventilation was inadequate. These findings suggested that radon diffused from highly contaminated basement and ground-floor rooms to other areas of the building and that sealing off the source may have led to reaccumulation of radon beneath the building. Later, subslab venting of below-ground radon pockets to the outside air was followed by more sustained reductions in indoor radon levels to levels below 75 Bq/m3. Even so, radon accumulated in certain rooms when the building was closed. This sentinel episode called attention to the need for a national radon policy requiring threshold exposure levels for response and control. A uniform nationwide standard for school buildings below 75 Bq/m3 level was suggested after considering prudent avoidance, the controversies over risk assessment of prolonged low-level exposures in children, and the fact that exposures in most locations in the Talpiot school could be reduced below this level. Proposal of this stringent standard stimulated the search for a strategy of risk control and management based on control at the source. This strategy was more effective and probably more cost effective than one based on suppression of exposure based on sealing and ventilation. Because many Israeli areas and much of the West Bank area of the Palestinian National Authority sit on the same phosphate deposits, regional joint projects for surveillance and control may be indicated. Images Figure 1. Figure 2. PMID:9467053

National surveys of radiofrequency field strengths from radio base stations in Africa

PubMed Central

Joyner, Ken H.; Van Wyk, Marthinus J.; Rowley, Jack T.

2014-01-01

The authors analysed almost 260 000 measurement points from surveys of radiofrequency (RF) field strengths near radio base stations in seven African countries over two time frames from 2001 to 2003 and 2006 to 2012. The results of the national surveys were compared, chronological trends investigated and potential exposures compared by technology and with frequency modulation (FM) radio. The key findings from thes data are that irrespective of country, the year and mobile technology, RF fields at a ground level were only a small fraction of the international human RF exposure recommendations. Importantly, there has been no significant increase in typical measured levels since the introduction of 3G services. The mean levels in these African countries are similar to the reported levels for countries of Asia, Europe and North America using similar mobile technologies. The median level for the FM services in South Africa was comparable to the individual but generally lower than the combined mobile services. PMID:24044904

Ethical Issues in Using Children's Blood Lead Levels as a Remedial Action Objective

PubMed Central

Evans, Emily Lorraine

2011-01-01

The Environmental Protection Agency measures the success or failure of Superfund site remediation efforts against remedial action objectives (RAOs). RAOs are frequently based on environmental contaminant concentrations, but with lead exposure, blood lead levels from the population at risk are often used. Although childhood lead screening is an important public health tool, an RAO based on child blood lead levels raises ethical concerns: public health efforts that are more reactive than preventive, a blood lead standard (10 μg/dL) that may not be fully protective, the use of a measure whose validity and reliability may be easily compromised, and exacerbation of environmental injustice and systematic disadvantages. The example of Bunker Hill mine, Kellogg, Idaho, allowed an examination of these ethical concerns. PMID:21836120

Finite element thermal analysis of multispectral coatings for the ABL

NASA Astrophysics Data System (ADS)

Shah, Rashmi S.; Bettis, Jerry R.; Stewart, Alan F.; Bonsall, Lynn; Copland, James; Hughes, William; Echeverry, Juan C.

1999-04-01

The thermal response of a coated optical surface is an important consideration in the design of any high average power system. Finite element temperature distribution were calculated for both coating witness samples and calorimetry wafers and were compared to actual measured data under tightly controlled conditions. Coatings for ABL were deposited on various substrates including fused silica, ULE, Zerodur, and silicon. The witness samples were irradiate data high power levels at 1.315micrometers to evaluate laser damage thresholds and study absorption levels. Excellent agreement was obtained between temperature predictions and measured thermal response curves. When measured absorption values were not available, the code was used to predict coating absorption based on the measured temperature rise on the back surface. Using the finite element model, the damaging temperature rise can be predicted for a coating with known absorption based on run time, flux, and substrate material.

Contamination detection NDE for cleaning process inspection

NASA Technical Reports Server (NTRS)

Marinelli, W. J.; Dicristina, V.; Sonnenfroh, D.; Blair, D.

1995-01-01

In the joining of multilayer materials, and in welding, the cleanliness of the joining surface may play a large role in the quality of the resulting bond. No non-intrusive techniques are currently available for the rapid measurement of contamination on large or irregularly shaped structures prior to the joining process. An innovative technique for the measurement of contaminant levels in these structures using laser based imaging is presented. The approach uses an ultraviolet excimer laser to illuminate large and/or irregular surface areas. The UV light induces fluorescence and is scattered from the contaminants. The illuminated area is viewed by an image-intensified CCD (charge coupled device) camera interfaced to a PC-based computer. The camera measures the fluorescence and/or scattering from the contaminants for comparison with established standards. Single shot measurements of contamination levels are possible. Hence, the technique may be used for on-line NDE testing during manufacturing processes.

Scientific evidence on perineal trauma during labor: Integrative review.

PubMed

Vieira, Flaviana; Guimarães, Janaina V; Souza, Marcia C S; Sousa, Poliana M L; Santos, Rafaela F; Cavalcante, Agueda M R Z

2018-04-01

To assess the scientific evidence for management and preservation of perineal integrity during the expulsive stage of labor. Integrative review that employed the Population, Intervention, Comparison, Outcome strategy to formulate the research question: Which perineal measure(s) is(are) effective in maintaining perineal integrity during labor? The search was performed in the databases MEDLINE, LILACS, BDENF and SciELO. The ten selected studies were analyzed based on their level of evidence and grade of recommendation. Four categories of measures were located: antenatal perineal care, perineal massage during the expulsive phase of labor, manual perineal support during the expulsive phase of labor and perineal hyaluronidase injection. Based on its level of evidence, perineal massage with lubricants performed by the women or their partners at the end of pregnancy may be recommended as a measure favorable for perineal protection. Copyright © 2018 Elsevier B.V. All rights reserved.

Experimental Analysis of Steel Beams Subjected to Fire Enhanced by Brillouin Scattering-Based Fiber Optic Sensor Data.

PubMed

Bao, Yi; Chen, Yizheng; Hoehler, Matthew S; Smith, Christopher M; Bundy, Matthew; Chen, Genda

2017-01-01

This paper presents high temperature measurements using a Brillouin scattering-based fiber optic sensor and the application of the measured temperatures and building code recommended material parameters into enhanced thermomechanical analysis of simply supported steel beams subjected to combined thermal and mechanical loading. The distributed temperature sensor captures detailed, nonuniform temperature distributions that are compared locally with thermocouple measurements with less than 4.7% average difference at 95% confidence level. The simulated strains and deflections are validated using measurements from a second distributed fiber optic (strain) sensor and two linear potentiometers, respectively. The results demonstrate that the temperature-dependent material properties specified in the four investigated building codes lead to strain predictions with less than 13% average error at 95% confidence level and that the Europe building code provided the best predictions. However, the implicit consideration of creep in Europe is insufficient when the beam temperature exceeds 800°C.

Shallow land burial of low-level radioactive wastes. A selected, annotated bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fore, C.S.; Vaughan, N.D.; Tappen, J.

1978-06-01

The data file was built to provide information support to DOE researchers in the field of low-level radioactive waste disposal and management. The scope of the data base emphasizes studies which deal with the ''old'' Manhattan sites, commercial disposal sites, and the specific parameters which affect the soil and geologic migration of radionuclides. Specialized data fields have been incorporated into the data base to improve the ease and accuracy of locating pertinent references. Specific radionuclides for which data are presented are listed in the ''Measured Radionuclides'' field, and specific parameters which affect the migration of these radionuclides are presented inmore » the ''Measured Parameters'' field. The 504 references are rated indicating applicability to shallow land burial technology and whether interpretation is required. Indexes are provided for author, geographic location, title, measured parameters, measured radionuclides, keywords, subject categories, and publication description. (DLC)« less

Results of a Multi-level Intervention to Prevent and Control Childhood Obesity among Latino Children: The Aventuras Para Niños Study

PubMed Central

Crespo, Noe C.; Elder, John P.; Ayala, Guadalupe X.; Campbell, Nadia R.; Arredondo, Elva M.; Slymen, Donald J.; Baquero, Barbara; Sallis, James F.; McKenzie, Thomas L.

2014-01-01

Background Community-based behavioral interventions are needed to reduce the burden of childhood obesity. Purpose This study evaluated the impact of a multi-level promotora-based (Community Health Advisor) intervention to promote healthy eating and physical activity (PA) and prevent excess weight gain among Latino children. Methods Thirteen elementary schools were randomized to one of four intervention conditions: individual and family level (Fam-only), school and community level (Comm-only), combined Fam+Comm intervention, or a measurement-only condition. Participants were 808 Latino parents and their children enrolled in kindergarten through 2nd grade. Measures included parent and child BMI and a self-administered parent survey that assessed several parent and child behaviors. Results There were no intervention effects on children's BMI z-score. The Fam-only and Fam+Comm interventions changed several obesity-related child behaviors and these were mediated by changes in parenting variables. Discussion A promotora-based behavioral intervention was efficacious at changing parental factors and child obesity-related health behaviors. PMID:22215470

Quality of in-hospital stroke care according to evidence-based performance measures: results from the first audit of stroke, Catalonia, Spain.

PubMed

Abilleira, Sònia; Gallofré, Miquel; Ribera, Aida; Sánchez, Emília; Tresserras, Ricard

2009-04-01

Evidence-based standards are used worldwide to determine quality of care. We assessed quality of in-hospital stroke care in all acute-care hospitals in Catalonia by determining adherence to 13 evidence-based performance measures (PMs) of process of care. Data on PMs were collected by retrospective review of medical records of consecutive stroke admissions (January to June, 2005). Compliance with PMs was calculated according to 3 hospital levels determined by their annual stroke case-load (level 1, <150 admissions/yr; level 2, 150 to 350; and level 3, >350). We defined sampling weights that represented each patient's inverse probability of inclusion in the study sample. Sampling weights were applied to produce estimates of compliance. Factors that predicted good/bad compliance were determined by multivariate weighted logistic regression models. An external monitoring of 10% of cases recruited at each hospital was undertaken, after random selection, to assess quality of data. We analyzed data from 1791 stroke cases (17% of all stroke admissions). Global interobserver agreement was 0.7. Eight PMs achieved compliances >or=75%, 4 of which were more than 90%, and the remaining showed adherences

Measuring News Media Literacy

ERIC Educational Resources Information Center

Maksl, Adam; Ashley, Seth; Craft, Stephanie

2015-01-01

News media literacy refers to the knowledge and motivations needed to identify and engage with journalism. This study measured levels of news media literacy among 500 teenagers using a new scale measure based on Potter's model of media literacy and adapted to news media specifically. The adapted model posits that news media literate individuals…

Development and Exploratory Validation of an Organizational Efficacy Scale

ERIC Educational Resources Information Center

Bohn, James G.

2010-01-01

Although many instruments have been developed to measure organizational constructs such as citizenship, climate, and organization-based esteem, to date no scale has been designed specifically to measure efficacy at the organizational level. Tools to measure organizational efficacy in a business context have been recommended for over two decades.…

Using Sap Flow Monitoring for Improved Process-based Ecohydrologic Understanding 2022

USDA-ARS?s Scientific Manuscript database

Sap flow measurements can be an important tool for unraveling the complex web of ecosystem fluxes, especially when it is combined with other measurements like eddy covariance, isotopes, remote sensing, etc. In this talk, we will demonstrate how sap flow measurements have improved our process-level u...

Block observations of neighbourhood physical disorder are associated with neighbourhood crime, firearm injuries and deaths, and teen births.

PubMed

Wei, Evelyn; Hipwell, Alison; Pardini, Dustin; Beyers, Jennifer M; Loeber, Rolf

2005-10-01

To provide reliability information for a brief observational measure of physical disorder and determine its relation with neighbourhood level crime and health variables after controlling for census based measures of concentrated poverty and minority concentration. Psychometric analysis of block observation data comprising a brief measure of neighbourhood physical disorder, and cross sectional analysis of neighbourhood physical disorder, neighbourhood crime and birth statistics, and neighbourhood level poverty and minority concentration. Pittsburgh, Pennsylvania, US (2000 population=334 563). Pittsburgh neighbourhoods (n=82) and their residents (as reflected in neighbourhood level statistics). The physical disorder index showed adequate reliability and validity and was associated significantly with rates of crime, firearm injuries and homicides, and teen births, while controlling for concentrated poverty and minority population. This brief measure of neighbourhood physical disorder may help increase our understanding of how community level factors reflect health and crime outcomes.

A new perspective on global mean sea level (GMSL) acceleration

NASA Astrophysics Data System (ADS)

Watson, Phil J.

2016-06-01

The vast body of contemporary climate change science is largely underpinned by the premise of a measured acceleration from anthropogenic forcings evident in key climate change proxies -- greenhouse gas emissions, temperature, and mean sea level. By virtue, over recent years, the issue of whether or not there is a measurable acceleration in global mean sea level has resulted in fierce, widespread professional, social, and political debate. Attempts to measure acceleration in global mean sea level (GMSL) have often used comparatively crude analysis techniques providing little temporal instruction on these key questions. This work proposes improved techniques to measure real-time velocity and acceleration based on five GMSL reconstructions spanning the time frame from 1807 to 2014 with substantially improved temporal resolution. While this analysis highlights key differences between the respective reconstructions, there is now more robust, convincing evidence of recent acceleration in the trend of GMSL.

Patients' Race, Ethnicity, Language, and Trust in a Physician

ERIC Educational Resources Information Center

Stepanikova, Irena; Mollborn, Stefanie; Cook, Karen S.; Thom, David H.; Kramer, Roderick M.

2006-01-01

We examine whether racial/ethnic/language-based variation in measured levels of patients' trust in a physician depends on the survey items used to measure that trust. Survey items include: (1) a direct measure of patients' trust that the doctor will put the patient's medical needs above all other considerations, and (2) three indirect measures of…

Canada's experience in applying C&I to measure progress towards SFM - perspectives from the National, Regional and local levels

Treesearch

John E. Hall; S. R. J. Bridge; Brian D. Haddon

2006-01-01

This paper will provide perspectives of Canada’s experiences in applying Criteria and Indicators (C&I) to measure progress towards Sustainable Forest Management (SFM) at the National, Regional (Provincial) and local levels. SFM is rooted in Bruntland’s concept of Sustainable Development and is about providing for present forest-based needs without compromising...

[Assessment comparison between area sampling and personal sampling noise measurement in new thermal power plant].

PubMed

Zhang, Hua; Chen, Qing-song; Li, Nan; Hua, Yan; Zeng, Lin; Xu, Guo-yang; Tao, Li-yuan; Zhao, Yi-ming

2013-05-01

To compare the results of noise hazard evaluations based on area sampling and personal sampling in a new thermal power plant and to analyze the similarities and differences between the two measurement methods. According to Measurement of Physical agents in Workplace Part 8: Noise(GBZff 189.8-2007), area sampling was performed at various operating points for noise measurement, and meanwhile the workers under different types of work wore noise dosimeters for personal noise exposure measurement. The two measurement methods were used to evaluate the level of noise hazards in the enterprise according to the corresponding occupational health standards, and the evaluation results were compared. Area sampling was performed at 99 operating points, the mean noise level was 88.9 ± 11.1 dB (A)(range, 51.3-107.0 dB (A)), with an over-standard rate of 75.8%. Personal sampling was performed (73 person times),and the mean noise level was 79.3 ± 6.3 dB (A), with an over-standard rate of 6.6% ( 16/241 ). There was a statistically significant difference in the over-standard rate between the evaluation results of the two measurement methods ( x2=53.869, ?<0.001 ). Because of the characteristics of the work in new thermal power plants, the noise hazard evaluation based on area sampling cannot be used instead of personal noise exposure measurement among workers. Personal sampling should be used in the noise measurement in new thermal power plant.

Research Matters

ERIC Educational Resources Information Center

VanDeWeghe, Rick

2005-01-01

The critical role played by the teacher feedback on the students' drafts is discussed. The standards-based scales measuring content, organization, and mechanics was used to determine the quality of students' writing and the teachers' feedback commentaries were considered either content level or surface level.

Measuring perceived video quality of MPEG enhancement by people with impaired vision

PubMed Central

Fullerton, Matthew; Woods, Russell L.; Vera-Diaz, Fuensanta A.; Peli, Eli

2007-01-01

We used a new method to measure the perceived quality of contrast-enhanced motion video. Patients with impaired vision (n = 24) and normally-sighted subjects (n = 6) adjusted the level of MPEG-based enhancement of 8 videos (4 minutes each) drawn from 4 categories. They selected the level of enhancement that provided the preferred view of the videos, using a reducing-step-size staircase procedure. Most patients made consistent selections of the preferred level of enhancement, indicating an appreciation of and a perceived benefit from the MPEG-based enhancement. The selections varied between patients and were correlated with letter contrast sensitivity, but the selections were not affected by training, experience or video category. We measured just noticeable differences (JNDs) directly for videos, and mapped the image manipulation (enhancement in our case) onto an approximately linear perceptual space. These tools and approaches will be of value in other evaluations of the image quality of motion video manipulations. PMID:18059909

Objective Physiological Measurements but Not Subjective Reports Moderate the Effect of Hunger on Choice Behavior

PubMed Central

Shabat-Simon, Maytal; Shuster, Anastasia; Sela, Tal; Levy, Dino J.

2018-01-01

Hunger is a powerful driver of human behavior, and is therefore of great interest to the study of psychology, economics, and consumer behavior. Assessing hunger levels in experiments is often biased, when using self-report methods, or complex, when using blood tests. We propose a novel way of objectively measuring subjects’ levels of hunger by identifying levels of alpha-amylase (AA) enzyme in their saliva samples. We used this measure to uncover the effect of hunger on different types of choice behaviors. We found that hunger increases risk-seeking behavior in a lottery-choice task, modifies levels of vindictiveness in a social decision-making task, but does not have a detectible effect on economic inconsistency in a budget-set choice task. Importantly, these findings were moderated by AA levels and not by self-report measures. We demonstrate the effects hunger has on choice behavior and the problematic nature of subjective measures of physiological states, and propose to use reliable and valid biologically based methods to overcome these problems. PMID:29875715

Kansas ground-water observation-well network, 1985

USGS Publications Warehouse

Dague, B.J.; Stullken, L.E.

1986-01-01

Water level measurements are made in 1,892 selected wells in 73 counties, which currently (1985) comprise the Kansas groundwater observation-well network. These measurements are made on a continuous, monthly, quarterly, or annual basis. Water level measurements have been made in observation wells since 1937 as part of a cooperative program among the Kansas Geological Survey , the Kansas State Board of Agriculture, the city of Wichita, and the U.S. Geological Survey. The objectives of the observation-well cooperative program are: (1) to provide long-term records of water level fluctuations in representative wells, (2) to facilitate the determination of possible water level trends that may indicate future availability of groundwater supplies, (3) to aid in the determination of possible changes in the base flow of streams, and (4) to provide information for use in water-resources research. This report lists for each well in the network the location, the first year of recorded water level measurement, the frequency and number of measurements, the land-surface altitude, hexagon-grid identifiers for wells in the High Plains aquifer, and the principal geologic unit(s) in which the well is completed. (USGS)

Implicit measures of the stereotype content associated with disability.

PubMed

Rohmer, Odile; Louvet, Eva

2012-12-01

The present research aimed to show that the mixed stereotype content of persons with disability observed at an explicit level does not manifest itself using implicit measures. Two experimental studies were conducted to analyse the stereotype content of persons with a disability at the implicit level. The procedure used in this study was the concept priming paradigm. Furthermore, Study 2 also included an explicit measure. Results show important discrepancies between implicit and explicit measures. At an explicit level, previous work supporting the mixed stereotype content of persons with disability was replicated: participants judged these persons as warmer but less competent than persons without a disability. At an implicit level, a quite different pattern of results emerged: persons with a disability were associated not only with less competence than persons without disability, but also with less warmth. These findings suggest that the mixed pattern between warmth and competence generally observed at an explicit level may be based on societal pressures against prejudice and discrimination. ©2012 The British Psychological Society.

Measurement and analysis of electromagnetic pollution generated by GSM-900 mobile phone networks in Erciyes University, Turkey.

PubMed

Sorgucu, Ugur; Develi, Ibrahim

2012-12-01

Mobile phones are becoming increasingly important in our everyday lives. The rising number of mobile phones reflects a similar increase in the number of base stations. Because of this rapid evolution, the establishment and planning of new base stations has become mandatory. However, the rise in the number of base stations, in terms of human health, is potentially very harmful. It is important to analyze the radiation levels of base stations until we can confirm that they are definitely not harmful in the long term. Mapping of electromagnetic field (EMF) is also important from a medical point of view because it provides useful information, for example, on the detection of diseases caused by EMF. With the help of this information the distribution of diseases over different regions can be obtained. In this article, the electromagnetic radiation levels of base stations were measured at 80 different points in Erciyes University (ERU), Turkey and detailed information about the measurement tools and measurement method were given. It was observed that no area in ERU exceeded the national and international limits. It is also observed that the effects of base stations vary according to duration and degree of exposure. Therefore, if people are exposed to a very low-intensity electromagnetic field for a very long time, serious health problems can occur.

ACCELERATORS: RF system design and measurement of HIRF-CSRe

NASA Astrophysics Data System (ADS)

Xu, Zhe; Zhao, Hong-Wei; Wang, Chun-Xiao; Xia, Jia-Wen; Zhan, Wen-Long; Bian, Zhi-Bin

2009-05-01

An RF system for the CSRe (cooling storage experimental ring) is designed and manufactured domestically. The present paper mainly describes the RF system design in five main sections: ferrite ring, RF cavity, RF generator, low level system and cavity cooling. The cavity is based on a type of coaxial resonator which is shorted at the end with one gap and loaded with domestic ferrite rings. The RF generator is designed in the push-pull mode and the low level control system is based on a DSP+FGPA+DDS+USB interface and has three feedback loops. Finally we give the results of the measurement on our system.

Photonic-based liquid level transmitter using Mach-Zehnder interferometer for industrial application

NASA Astrophysics Data System (ADS)

Singh, Yadvendra; Raghuwanshi, Sanjeev K.; Kumar, Manish

2018-02-01

In the present scenario the process control industries mainly uses 1-5 Volt or 4-20 mA protocol for transmitting the measured signal to remote location operators. These types of protocol prone to interference and limited data transfer rate. To overcome these types of limitation we proposed photonic based transmitter for liquid level measurement which will enhance data transfer rate and interference reduction to eliminate noise signal in the channel during transmission to make transmission more reliable, accurate and consistent in performance. The required mathematical derivation and the principle of operation of the transmitter are shown in the paper.

Advanced Satellite-Based Frequency Transfer at the 10-16 Level.

PubMed

Fujieda, Miho; Yang, Sung-Hoon; Gotoh, Tadahiro; Hwang, Sang-Wook; Hachisu, Hidekazu; Kim, Huidong; Lee, Young Kyu; Tabuchi, Ryo; Ido, Tetsuya; Lee, Won-Kyu; Heo, Myoung-Sun; Park, Chang Yong; Yu, Dai-Hyuk; Petit, Gerard

2018-06-01

Advanced satellite-based frequency transfers by two-way carrier-phase (TWCP) and integer precise point positioning have been performed between the National Institute of Information and Communications Technology and Korea Research Institute of Standards and Science. We confirm that the disagreement between them is less than at an averaging time of several days. In addition, an overseas frequency ratio measurement of Sr and Yb optical lattice clocks was directly performed by TWCP. We achieved an uncertainty at the mid-10 -16 level after a total measurement time of 12 h. The frequency ratio was consistent with the recently reported values within the uncertainty.

Pilot study for evidence-based nursing management: improving the levels of job satisfaction, organizational commitment, and intent to leave among nurses in Turkey.

PubMed

Arslan Yurumezoglu, Havva; Kocaman, Gulseren

2012-06-01

Because of the nursing shortage problem, an important goal for nurse managers is preventing nurses from leaving the organization. This study analyzed the effect of evidence-based nursing management practices on nurses' levels of job satisfaction, organizational commitment, and intent to leave using the Promoting Action Research Implementation in Health Service framework as a guide. This study employed a single-group, quasi-experimental, pretest-post-test design with repeated measures. Data were collected using the Minnesota Job Satisfaction Questionnaire and the Organizational Commitment Scale. The study was conducted at a 127-bed private, accredited hospital. The sample was composed of 58 nurses who participated in all three measurements. Data analysis was conducted using repeated-measures anova and the Cochrane Q-test. An improvement was observed in the nurses' intrinsic, extrinsic, and total satisfaction levels, and in the degree of normative commitment. Nurse managers stated that they benefited from this study. In order to find effective and long-lasting solutions to the nursing shortage problem, evidence-based recommendations should be used in nursing management. © 2012 Blackwell Publishing Asia Pty Ltd.

Serum creatinine detection by a conducting-polymer-based electrochemical sensor to identify allograft dysfunction.

PubMed

Wei, Fang; Cheng, Scott; Korin, Yael; Reed, Elaine F; Gjertson, David; Ho, Chih-ming; Gritsch, H Albin; Veale, Jeffrey

2012-09-18

Kidney transplant recipients who have abnormally high creatinine levels in their blood often have allograft dysfunction secondary to rejection. Creatinine has become the preferred marker for renal dysfunction and is readily available in hospital clinical settings. We developed a rapid and accurate polymer-based electrochemical point-of-care (POC) assay for creatinine detection from whole blood to identify allograft dysfunction. The creatinine concentrations of 19 blood samples from transplant recipients were measured directly from clinical serum samples by the conducting polymer-based electrochemical (EC) sensor arrays. These measurements were compared to the traditional clinical laboratory assay. The time required for detection was <5 min from sample loading. Sensitivity of the detection was found to be 0.46 mg/dL of creatinine with only 40 μL sample in the creatinine concentration range of 0 mg/dL to 11.33 mg/dL. Signal levels that were detected electrochemically correlated closely with the creatinine blood concentration detected by the UCLA Ronald Reagan Medical Center traditional clinical laboratory assay (correlation coefficient = 0.94). This work is encouraging for the development of a rapid and accurate POC device for measuring creatinine levels in whole blood.

Performance of a GaAlAs laser diode stabilized on a hyperfine component of two-photon transitions in rubidium at 778 nm

NASA Astrophysics Data System (ADS)

Felder, Raymond; Touahri, D.; Acef, Ouali; Hilico, L.; Zondy, Jean-Jacques; Clairon, Andre; de Beauvoir, Beatrice; Biraben, Francois; Julien, Lucile; Nez, Francois; Millerioux, Yves P.

1995-04-01

The absolute frequency measurement of each hyperfine component of the 5S3/2 and 5S5/2 levels in rubidium was done at ENS more than one year ago using Ti-Sa lasers. We built two devices based on diode lasers to study some metrological properties. We measure the frequency differences between hyperfine components of the 5S5/2 level and we calculate the corresponding hyperfine constants. We also measure the frequency interval between the 5S3/2 and 5S5/2 levels using a Schottky diode. The measured stability in terms of Allan variance is 3*10-13t-1/2 up to 2000 s. The light shift is investigated and the difference between our two systems is 1.7 kHz. The repeatability of one system is better than 10-12 and will allow the absolute frequency measurement at this level via the LPTF frequency synthesis chain.

Nutritional Status Assessment of Marines before and after the Installation of the ’Multi-Restaurant’ Food Service System at the Twentynine Palms Marine Corps Base, California

DTIC Science & Technology

1984-12-01

Biochemical and Dietary Measurements 129 Table 40 - Correlations Between Biochemical and Dietary Measurements 130 Table 41 - Serum Vitamin A Levels of 29...Palms Personnel By Average Daily Vitamin A Consumption 131 Table 42 - Average Daily Vitamin A Intake of Marines By Serum Vitamin A Levels 132 xiii Z...vitamin A levels increased further to a high of 80% in the female personnel. The poor vitamin A nutritional status was reflected also in the low serum

Systems antecedents for dissemination and implementation: a review and analysis of measures.

PubMed

Emmons, Karen M; Weiner, Bryan; Fernandez, Maria Eulalia; Tu, Shin-Ping

2012-02-01

There is a growing emphasis on the role of organizations as settings for dissemination and implementation. Only recently has the field begun to consider features of organizations that affect dissemination and implementation of evidence-based interventions. This manuscript identifies and evaluates available measures for five key organizational-level constructs: (a) leadership, (b) vision, (c) managerial relations, (d) climate, and (e) absorptive capacity. Overall the picture was the same across the five constructs--no measure was used in more than one study, many studies did not report the psychometric properties of the measures, some assessments were based on a single response per unit, and the level of the instrument and analysis did not always match. One must seriously consider the development and evaluation of a robust set of measures that will serve as the basis of building the field, allow for comparisons across organizational types and intervention topics, and allow a robust area of dissemination and implementation research to develop.

Systems Antecedents for Dissemination and Implementation: A Review and Analysis of Measures

PubMed Central

Emmons, Karen M.; Weiner, Bryan; Fernandez, Maria; Tu, Shin-Ping

2011-01-01

There is a growing emphasis on the role of organizations as settings for dissemination and implementation. Only recently has the field begun to consider features of organizations that impact on dissemination and implementation of evidence-based interventions. This manuscript identifies and evaluates available measures for 5 key organizational-level constructs: (1) leadership; (2) vision; (3) managerial relations; (4) climate; and (5) absorptive capacity. Overall the picture was the same across the five constructs—no measure was used in more than one study, many studies did not report the psychometric properties of the measures, some assessments were based on a single response per unit, and the level of the instrument and analysis did not always match. We must seriously consider the development and evaluation of a robust set of measures that will serve as the basis of building the field, allow for comparisons across organizational types and intervention topics, and allow a robust area of dissemination and implementation research to develop. PMID:21724933

Accurate FRET Measurements within Single Diffusing Biomolecules Using Alternating-Laser Excitation

PubMed Central

Lee, Nam Ki; Kapanidis, Achillefs N.; Wang, You; Michalet, Xavier; Mukhopadhyay, Jayanta; Ebright, Richard H.; Weiss, Shimon

2005-01-01

Fluorescence resonance energy transfer (FRET) between a donor (D) and an acceptor (A) at the single-molecule level currently provides qualitative information about distance, and quantitative information about kinetics of distance changes. Here, we used the sorting ability of confocal microscopy equipped with alternating-laser excitation (ALEX) to measure accurate FRET efficiencies and distances from single molecules, using corrections that account for cross-talk terms that contaminate the FRET-induced signal, and for differences in the detection efficiency and quantum yield of the probes. ALEX yields accurate FRET independent of instrumental factors, such as excitation intensity or detector alignment. Using DNA fragments, we showed that ALEX-based distances agree well with predictions from a cylindrical model of DNA; ALEX-based distances fit better to theory than distances obtained at the ensemble level. Distance measurements within transcription complexes agreed well with ensemble-FRET measurements, and with structural models based on ensemble-FRET and x-ray crystallography. ALEX can benefit structural analysis of biomolecules, especially when such molecules are inaccessible to conventional structural methods due to heterogeneity or transient nature. PMID:15653725

Prediction of dynamic strains on a monopile offshore wind turbine using virtual sensors

NASA Astrophysics Data System (ADS)

Iliopoulos, A. N.; Weijtjens, W.; Van Hemelrijck, D.; Devriendt, C.

2015-07-01

The monitoring of the condition of the offshore wind turbine during its operational states offers the possibility of performing accurate assessments of the remaining life-time as well as supporting maintenance decisions during its entire life. The efficacy of structural monitoring in the case of the offshore wind turbine, though, is undermined by the practical limitations connected to the measurement system in terms of cost, weight and feasibility of sensor mounting (e.g. at muddline level 30m below the water level). This limitation is overcome by reconstructing the full-field response of the structure based on the limited number of measured accelerations and a calibrated Finite Element Model of the system. A modal decomposition and expansion approach is used for reconstructing the responses at all degrees of freedom of the finite element model. The paper will demonstrate the possibility to predict dynamic strains from acceleration measurements based on the aforementioned methodology. These virtual dynamic strains will then be evaluated and validated based on actual strain measurements obtained from a monitoring campaign on an offshore Vestas V90 3 MW wind turbine on a monopile foundation.

An Approach for the Accurate Measurement of Social Morality Levels

PubMed Central

Liu, Haiyan; Chen, Xia; Zhang, Bo

2013-01-01

In the social sciences, computer-based modeling has become an increasingly important tool receiving widespread attention. However, the derivation of the quantitative relationships linking individual moral behavior and social morality levels, so as to provide a useful basis for social policy-making, remains a challenge in the scholarly literature today. A quantitative measurement of morality from the perspective of complexity science constitutes an innovative attempt. Based on the NetLogo platform, this article examines the effect of various factors on social morality levels, using agents modeling moral behavior, immoral behavior, and a range of environmental social resources. Threshold values for the various parameters are obtained through sensitivity analysis; and practical solutions are proposed for reversing declines in social morality levels. The results show that: (1) Population size may accelerate or impede the speed with which immoral behavior comes to determine the overall level of social morality, but it has no effect on the level of social morality itself; (2) The impact of rewards and punishment on social morality levels follows the “5∶1 rewards-to-punishment rule,” which is to say that 5 units of rewards have the same effect as 1 unit of punishment; (3) The abundance of public resources is inversely related to the level of social morality; (4) When the cost of population mobility reaches 10% of the total energy level, immoral behavior begins to be suppressed (i.e. the 1/10 moral cost rule). The research approach and methods presented in this paper successfully address the difficulties involved in measuring social morality levels, and promise extensive application potentials. PMID:24312189

An approach for the accurate measurement of social morality levels.

PubMed

Liu, Haiyan; Chen, Xia; Zhang, Bo

2013-01-01

In the social sciences, computer-based modeling has become an increasingly important tool receiving widespread attention. However, the derivation of the quantitative relationships linking individual moral behavior and social morality levels, so as to provide a useful basis for social policy-making, remains a challenge in the scholarly literature today. A quantitative measurement of morality from the perspective of complexity science constitutes an innovative attempt. Based on the NetLogo platform, this article examines the effect of various factors on social morality levels, using agents modeling moral behavior, immoral behavior, and a range of environmental social resources. Threshold values for the various parameters are obtained through sensitivity analysis; and practical solutions are proposed for reversing declines in social morality levels. The results show that: (1) Population size may accelerate or impede the speed with which immoral behavior comes to determine the overall level of social morality, but it has no effect on the level of social morality itself; (2) The impact of rewards and punishment on social morality levels follows the "5∶1 rewards-to-punishment rule," which is to say that 5 units of rewards have the same effect as 1 unit of punishment; (3) The abundance of public resources is inversely related to the level of social morality; (4) When the cost of population mobility reaches 10% of the total energy level, immoral behavior begins to be suppressed (i.e. the 1/10 moral cost rule). The research approach and methods presented in this paper successfully address the difficulties involved in measuring social morality levels, and promise extensive application potentials.

MRI Quantification of Human Spine Cartilage Endplate Geometry: Comparison With Age, Degeneration, Level, and Disc Geometry

PubMed Central

DeLucca, John F.; Peloquin, John M.; Smith, Lachlan J.; Wright, Alexander C.; Vresilovic, Edward J.; Elliott, Dawn M.

2017-01-01

Geometry is an important indicator of disc mechanical function and degeneration. While the geometry and associated degenerative changes in the nucleus pulposus and the annulus fibrosus are well-defined, the geometry of the cartilage endplate (CEP) and its relationship to disc degeneration are unknown. The objectives of this study were to quantify CEP geometry in three dimensions using an MRI FLASH imaging sequence and evaluate relationships between CEP geometry and age, degeneration, spinal level, and overall disc geometry. To do so, we assessed the MRI-based measurements for accuracy and repeatability. Next, we measured CEP geometry across a larger sample set and correlated CEP geometric parameters to age, disc degeneration, level, and disc geometry. The MRI-based measures resulted in thicknesses (0.3–1 mm) that are comparable to prior measurements of CEP thickness. CEP thickness was greatest at the anterior/posterior (A/P) margins and smallest in the center. The CEP A/P thickness, axial area, and lateral width decreased with age but were not related to disc degeneration. Age-related, but not degeneration-related, changes in geometry suggest that the CEP may not follow the progression of disc degeneration. Ultimately, if the CEP undergoes significant geometric changes with aging and if these can be related to low back pain, a clinically feasible translation of the FLASH MRI-based measurement of CEP geometry presented in this study may prove a useful diagnostic tool. PMID:27232974

Action levels for airborne uranium in the workplace: chemical and radiological assessments.

PubMed

Leggett, R W; Meck, R A

2018-06-01

A method is described for deriving two levels of action-an investigation level (IL) and an immediate action level (IAL)-for different forms and mixtures of the natural uranium (U) isotopes 234 U, 235 U, and 238 U in air in the workplace. An IL indicates the need to confirm the validity of moderately elevated measurements of airborne U and adequacy of confinement controls and determine whether work limitations are appropriate. An IAL indicates that safeguards should be put into place immediately, including removal of workers from further exposure until conditions are acceptable. Derivations of ILs and IALs are based on latest radiation protection guidance, information on chemical toxicity of U, and biokinetic models for U. An action level (IL or IAL) is the more restrictive of two derived values, the action level based on U as a chemical hazard and the action level based on U as a radiation hazard.

GPS-Based Exposure to Greenness and Walkability and Accelerometry-Based Physical Activity.

PubMed

James, Peter; Hart, Jaime E; Hipp, J Aaron; Mitchell, Jonathan A; Kerr, Jacqueline; Hurvitz, Philip M; Glanz, Karen; Laden, Francine

2017-04-01

Background: Physical inactivity is a risk factor for cancer that may be influenced by environmental factors. Indeed, dense and well-connected built environments and environments with natural vegetation may create opportunities for higher routine physical activity. However, studies have focused primarily on residential environments to define exposure and self-reported methods to estimate physical activity. This study explores the momentary association between minute-level global positioning systems (GPS)-based greenness exposure and time-matched objectively measured physical activity. Methods: Adult women were recruited from sites across the United States. Participants wore a GPS device and accelerometer on the hip for 7 days to assess location and physical activity at minute-level epochs. GPS records were linked to 250 m resolution satellite-based vegetation data and Census Block Group-level U.S. Environmental Protection Agency (EPA) Smart Location Database walkability data. Minute-level generalized additive mixed models were conducted to test for associations between GPS measures and accelerometer count data, accounting for repeated measures within participant and allowing for deviations from linearity using splines. Results: Among 360 adult women (mean age of 55.3 ± 10.2 years), we observed positive nonlinear relationships between physical activity and both greenness and walkability. In exploratory analyses, the relationships between environmental factors and physical activity were strongest among those who were white, had higher incomes, and who were middle-aged. Conclusions: Our results indicate that higher levels of physical activity occurred in areas with higher greenness and higher walkability. Impact: Findings suggest that planning and design policies should focus on these environments to optimize opportunities for physical activity. Cancer Epidemiol Biomarkers Prev; 26(4); 525-32. ©2017 AACR See all the articles in this CEBP Focus section, "Geospatial Approaches to Cancer Control and Population Sciences." ©2017 American Association for Cancer Research.

Torsional ultrasonic wave based level measurement system

DOEpatents

Holcomb, David E [Oak Ridge, TN; Kisner, Roger A [Knoxville, TN

2012-07-10

A level measurement system suitable for use in a high temperature and pressure environment to measure the level of coolant fluid within the environment, the system including a volume of coolant fluid located in a coolant region of the high temperature and pressure environment and having a level therein; an ultrasonic waveguide blade that is positioned within the desired coolant region of the high temperature and pressure environment; a magnetostrictive electrical assembly located within the high temperature and pressure environment and configured to operate in the environment and cooperate with the waveguide blade to launch and receive ultrasonic waves; and an external signal processing system located outside of the high temperature and pressure environment and configured for communicating with the electrical assembly located within the high temperature and pressure environment.

Computer systems and methods for visualizing data

DOEpatents

Stolte, Chris; Hanrahan, Patrick

2010-07-13

A method for forming a visual plot using a hierarchical structure of a dataset. The dataset comprises a measure and a dimension. The dimension consists of a plurality of levels. The plurality of levels form a dimension hierarchy. The visual plot is constructed based on a specification. A first level from the plurality of levels is represented by a first component of the visual plot. A second level from the plurality of levels is represented by a second component of the visual plot. The dataset is queried to retrieve data in accordance with the specification. The data includes all or a portion of the dimension and all or a portion of the measure. The visual plot is populated with the retrieved data in accordance with the specification.

Computer systems and methods for visualizing data

DOEpatents

Stolte, Chris; Hanrahan, Patrick

2013-01-29

A method for forming a visual plot using a hierarchical structure of a dataset. The dataset comprises a measure and a dimension. The dimension consists of a plurality of levels. The plurality of levels form a dimension hierarchy. The visual plot is constructed based on a specification. A first level from the plurality of levels is represented by a first component of the visual plot. A second level from the plurality of levels is represented by a second component of the visual plot. The dataset is queried to retrieve data in accordance with the specification. The data includes all or a portion of the dimension and all or a portion of the measure. The visual plot is populated with the retrieved data in accordance with the specification.

A large-scale measurement of electromagnetic fields near GSM base stations in Guangxi, China for risk communication.

PubMed

Wu, Tongning; Shao, Qing; Yang, Lei; Qi, Dianyuan; Lin, Jun; Lin, Xiaojun; Yu, Zongying

2013-06-01

Radiofrequency (RF) electromagnetic field (EMF) exposure from wireless telecommunication base station antennae can lead to debates, conflicts or litigations among the adjacent residents if inappropriately managed. This paper presents a measurement campaign for the GSM band EMF exposure in the vicinity of 827 base station sites (totally 6207 measurement points) in Guangxi, China. Measurement specifications are designed for risk communication with the residents who previously complained of over-exposure. The EMF power densities with the global positioning system coordinate at each measured point were recorded. Compliance with the International Commission on Non-Ionizing Radiation Protection guidelines and Chinese environmental EMF safety standards was studied. The results show that the GSM band EMF level near the base stations is very low. The measurement results and the EMF risk communication procedures positively influence public perception of the RF EMF exposure from the base stations and promote the exchange of EMF exposure-related knowledge.

Interference susceptibility measurements for an MSK satellite communication link

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Fujikawa, Gene

1992-01-01

The results are presented of measurements of the degradation of an MSK satellite link due to modulated and CW (unmodulated) interference. These measurements were made using a hardware based satellite communication link simulator at NASA-Lewis. The results indicate the amount of bit error rate degradation caused by CW interference as a function of frequency and power level, and the degradation caused by adjacent channel and cochannel modulated interference as a function of interference power level. Results were obtained for both the uplink case (including satellite nonlinearity) and the downlink case (linear channel).

Brain network dynamics characterization in epileptic seizures. Joint directed graph and pairwise synchronization measures

NASA Astrophysics Data System (ADS)

Rodrigues, A. C.; Machado, B. S.; Florence, G.; Hamad, A. P.; Sakamoto, A. C.; Fujita, A.; Baccalá, L. A.; Amaro, E.; Sameshima, K.

2014-12-01

Here we propose and evaluate a new approach to analyse multichannel mesial temporal lobe epilepsy EEG data from eight patients through complex network and synchronization theories. The method employs a Granger causality test to infer the directed connectivity graphs and a wavelet transform based phase synchronization measure whose characteristics allow studying dynamical transitions during epileptic seizures. We present a new combined graph measure that quantifies the level of network hub formation, called network hub out-degree, which closely reflects the level of synchronization observed during the ictus.

Impact of Alzheimer's Disease on Caregiver Questionnaire: internal consistency, convergent validity, and test-retest reliability of a new measure for assessing caregiver burden.

PubMed

Cole, Jason C; Ito, Diane; Chen, Yaozhu J; Cheng, Rebecca; Bolognese, Jennifer; Li-McLeod, Josephine

2014-09-04

There is a lack of validated instruments to measure the level of burden of Alzheimer's disease (AD) on caregivers. The Impact of Alzheimer's Disease on Caregiver Questionnaire (IADCQ) is a 12-item instrument with a seven-day recall period that measures AD caregiver's burden across emotional, physical, social, financial, sleep, and time aspects. Primary objectives of this study were to evaluate psychometric properties of IADCQ administered on the Web and to determine most appropriate scoring algorithm. A national sample of 200 unpaid AD caregivers participated in this study by completing the Web-based version of IADCQ and Short Form-12 Health Survey Version 2 (SF-12v2™). The SF-12v2 was used to measure convergent validity of IADCQ scores and to provide an understanding of the overall health-related quality of life of sampled AD caregivers. The IADCQ survey was also completed four weeks later by a randomly selected subgroup of 50 participants to assess test-retest reliability. Confirmatory factor analysis (CFA) was implemented to test the dimensionality of the IADCQ items. Classical item-level and scale-level psychometric analyses were conducted to estimate psychometric characteristics of the instrument. Test-retest reliability was performed to evaluate the instrument's stability and consistency over time. Virtually none (2%) of the respondents had either floor or ceiling effects, indicating the IADCQ covers an ideal range of burden. A single-factor model obtained appropriate goodness of fit and provided evidence that a simple sum score of the 12 items of IADCQ can be used to measure AD caregiver's burden. Scales-level reliability was supported with a coefficient alpha of 0.93 and an intra-class correlation coefficient (for test-retest reliability) of 0.68 (95% CI: 0.50-0.80). Low-moderate negative correlations were observed between the IADCQ and scales of the SF-12v2. The study findings suggest the IADCQ has appropriate psychometric characteristics as a unidimensional, Web-based measure of AD caregiver burden and is supported by strong model fit statistics from CFA, high degree of item-level reliability, good internal consistency, moderate test-retest reliability, and moderate convergent validity. Additional validation of the IADCQ is warranted to ensure invariance between the paper-based and Web-based administration and to determine an appropriate responder definition.

Motor transport related harmful PM2.5 and PM10: from onroad measurements to the modelling of air pollution by neural network approach on street and urban level

NASA Astrophysics Data System (ADS)

Lozhkina, O.; Lozhkin, V.; Nevmerzhitsky, N.; Tarkhov, D.; Vasilyev, A.

2016-11-01

The level of PM10 and PM2.5 concentrations in the air on seven roads in St. Petersburg, Russia, were investigated using gravimetry and nephelometry measurement techniques in 2013-2015. The effects of meteorological conditions (temperature, relative humidity, wind direction, and speed) and the intensity of traffic flows on the results of the measurements were also evaluated. On the base of the measurements, there was developed a neural network modelling approach that allowed to quantify exhaust / non-exhaust PM10 and PM 2.5 emissions and carry out numerical investigations of air pollution by transport related PM2.5 and PM10 on street and urban level in St. Petersburg.

Humidity control of an incubator using the microcontroller-based active humidifier system employing an ultrasonic nebulizer.

PubMed

Güler, I; Burunkaya, M

2002-01-01

Relative humidity levels of an incubator were measured and controlled. An ultrasonic nebulizer system as an active humidifier was used to humidify the incubator environment. An integrated circuit-type humidity sensor was used to measure the humidity level of the incubator environment. Measurement and control processes were achieved by a PIC microcontroller. The high-performance and high-speed PIC provided the flexibility of the system. The developed system can be used effectively for the intensive care of newborns and/or premature babies. Since the humidifier generates an aerosol in ambient conditions, it is possible to provide the high relative humidity level for therapeutic and diagnostic purposes in medicine.

Aerodynamic Performance of a Compact, High Work-Factor Centrifugal Compressor at the Stage and Subcomponent Level

NASA Technical Reports Server (NTRS)

Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.

2014-01-01

The measured aerodynamic performance of a compact, high work factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90-bend, and exit guide vane (EGV), is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level are reported for operation between 70 to 105 of design corrected speed, with subcomponent (impeller, diffuser, and exitguide-vane) detailed flow field measurements presented and discussed at the 100 design-speed condition. Individual component losses from measurements are compared with pre-test predictions on a limited basis.

Possible incorporation of petroleum-based carbons in biochemicals produced by bioprocess--biomass carbon ratio measured by accelerator mass spectrometry.

PubMed

Kunioka, Masao

2010-06-01

The biomass carbon ratios of biochemicals related to biomass have been reviewed. Commercial products from biomass were explained. The biomass carbon ratios of biochemical compounds were measured by accelerator mass spectrometry (AMS) based on the (14)C concentration of carbons in the compounds. This measuring method uses the mechanism that biomass carbons include a very low level of (14)C and petroleum carbons do not include (14)C similar to the carbon dating measuring method. It was confirmed that there were some biochemicals synthesized from petroleum-based carbons. This AMS method has a high accuracy with a small standard deviation and can be applied to plastic products.

ArI/ArII laser induced fluorescence system for measurement of neutral and ion dynamics in a large scale helicon plasma

NASA Astrophysics Data System (ADS)

Kelly, R. F.; Meaney, K. D.; Gilmore, M.; Desjardins, T. R.; Zhang, Y.

2016-11-01

In order to investigate the role of both neutral and ion dynamics in large-scale helicon discharges, a laser induced fluorescence (LIF) system capable of measuring both ArI and ArII fluorescence using a single tunable laser is being developed. The system is based on a >250 mW solid state laser. For ArI measurements, the laser pumps the metastable (2P03/2)4s level to the (2P01/2)4p level using 696.7352 nm light, and fluorescence radiation from decay to the (2P01/2)4s level at 772.6333 nm is observed. For ArII, currently in development, the metastable (3P)3d 4F7/2 level will be pumped to the (3P)4p 4D07/2 level using 688.8511 nm, and decay fluorescence to the (3P)4s 4P5/2 level at 434.9285 nm measured. Here all wavelengths are in a vacuum.

ArI/ArII laser induced fluorescence system for measurement of neutral and ion dynamics in a large scale helicon plasma.

PubMed

Kelly, R F; Meaney, K D; Gilmore, M; Desjardins, T R; Zhang, Y

2016-11-01

In order to investigate the role of both neutral and ion dynamics in large-scale helicon discharges, a laser induced fluorescence (LIF) system capable of measuring both ArI and ArII fluorescence using a single tunable laser is being developed. The system is based on a >250 mW solid state laser. For ArI measurements, the laser pumps the metastable ( 2 P 0 3/2 )4s level to the ( 2 P 0 1/2 )4p level using 696.7352 nm light, and fluorescence radiation from decay to the ( 2 P 0 1/2 )4s level at 772.6333 nm is observed. For ArII, currently in development, the metastable ( 3 P)3d 4 F 7/2 level will be pumped to the ( 3 P)4p 4 D 0 7/2 level using 688.8511 nm, and decay fluorescence to the ( 3 P)4s 4 P 5/2 level at 434.9285 nm measured. Here all wavelengths are in a vacuum.

FROM MOLECULES TO POPULATIONS: USING POPULATION GENETICS TO ANSWER THE SO WHAT QUESTION

EPA Science Inventory

Important endpoints for ecological risk assessments are usually those that affect population or species persistence rather than individual-level responses. Nonetheless, ecological risk assessments are generally based on measures of individual-level responses. Extrapolation of i...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kin, Tadahiro; Oshima, Masumi; Furutaka, Kazuyoshi

We are developing a new method to identify nuclear levels based on neutron capture reactions, named 'TELLA-2.' Measured data of prompt gamma rays from {sup 33}S(n,{gamma}){sup 34}S was used to improve the method. We will show how we obtain candidates of nuclear levels.

Design and Testing of an Air Force Services Mystery Shopping Program.

DTIC Science & Technology

1998-11-01

Base level Air Force Services’ lodging and foodservice activities use limited service quality measurement tools to determine customer perceptions of... service quality . These tools, specifically management observation and customer comment cards, do not provide a complete picture of service quality . Other... service quality measurement methods such as mystery shopping are rarely used. Bases do not consider using mystery shopping programs because of the

A Comparison of Common and Novel Curriculum-Based Measurement of Reading Decision Rules to Predict Spring Performance for Students Receiving Supplemental Interventions

ERIC Educational Resources Information Center

Van Norman, Ethan R.; Parker, David C.

2018-01-01

Recent simulations suggest that trend line decision rules applied to curriculum-based measurement of reading progress monitoring data may lead to inaccurate interpretations unless data are collected for upward of 3 months. The authors of those studies did not manipulate goal line slope or account for a student's level of initial performance when…

The Development and Evaluation of an Achievement Test for Measuring the Efficacy of Task-Based Writing Activities to Enhance Iranian EFL Learners' Reading Comprehension

ERIC Educational Resources Information Center

Nejad, Ferdows Mohsen; Khosravian, Fereshteh

2014-01-01

The present study examined the reliability of an achievement test to measure the efficacy of task-based writing activities to improve Iranian EFL learners' reading comprehension at the intermediate level in a private language institute in Ilam, Iran, namely Alefba language institute. To achieve the goal, the techniques for evaluating reliability…

Effects of a Web-Based Personalized Intervention on Physical Activity in European Adults: A Randomized Controlled Trial.

PubMed

Marsaux, Cyril Fm; Celis-Morales, Carlos; Fallaize, Rosalind; Macready, Anna L; Kolossa, Silvia; Woolhead, Clara; O'Donovan, Clare B; Forster, Hannah; Navas-Carretero, Santiago; San-Cristobal, Rodrigo; Lambrinou, Christina-Paulina; Moschonis, George; Surwillo, Agnieszka; Godlewska, Magdalena; Goris, Annelies; Hoonhout, Jettie; Drevon, Christian A; Manios, Yannis; Traczyk, Iwona; Walsh, Marianne C; Gibney, Eileen R; Brennan, Lorraine; Martinez, J Alfredo; Lovegrove, Julie A; Gibney, Michael J; Daniel, Hannelore; Mathers, John C; Saris, Wim Hm

2015-10-14

The high prevalence of physical inactivity worldwide calls for innovative and more effective ways to promote physical activity (PA). There are limited objective data on the effectiveness of Web-based personalized feedback on increasing PA in adults. It is hypothesized that providing personalized advice based on PA measured objectively alongside diet, phenotype, or genotype information would lead to larger and more sustained changes in PA, compared with nonpersonalized advice. A total of 1607 adults in seven European countries were randomized to either a control group (nonpersonalized advice, Level 0, L0) or to one of three personalized groups receiving personalized advice via the Internet based on current PA plus diet (Level 1, L1), PA plus diet and phenotype (Level 2, L2), or PA plus diet, phenotype, and genotype (Level 3, L3). PA was measured for 6 months using triaxial accelerometers, and self-reported using the Baecke questionnaire. Outcomes were objective and self-reported PA after 3 and 6 months. While 1270 participants (85.81% of 1480 actual starters) completed the 6-month trial, 1233 (83.31%) self-reported PA at both baseline and month 6, but only 730 (49.32%) had sufficient objective PA data at both time points. For the total cohort after 6 months, a greater improvement in self-reported total PA (P=.02) and PA during leisure (nonsport) (P=.03) was observed in personalized groups compared with the control group. For individuals advised to increase PA, we also observed greater improvements in those two self-reported indices (P=.006 and P=.008, respectively) with increased personalization of the advice (L2 and L3 vs L1). However, there were no significant differences in accelerometer results between personalized and control groups, and no significant effect of adding phenotypic or genotypic information to the tailored feedback at month 3 or 6. After 6 months, there were small but significant improvements in the objectively measured physical activity level (P<.05), moderate PA (P<.01), and sedentary time (P<.001) for individuals advised to increase PA, but these changes were similar across all groups. Different levels of personalization produced similar small changes in objective PA. We found no evidence that personalized advice is more effective than conventional "one size fits all" guidelines to promote changes in PA in our Web-based intervention when PA was measured objectively. Based on self-reports, PA increased to a greater extent with more personalized advice. Thus, it is crucial to measure PA objectively in any PA intervention study. ClinicalTrials.gov NCT01530139; http://clinicaltrials.gov/show/NCT01530139 (Archived by WebCite at: http://www.webcitation.org/6XII1QwHz).

Effects of a Web-Based Personalized Intervention on Physical Activity in European Adults: A Randomized Controlled Trial

PubMed Central

Celis-Morales, Carlos; Fallaize, Rosalind; Macready, Anna L; Kolossa, Silvia; Woolhead, Clara; O'Donovan, Clare B; Forster, Hannah; Navas-Carretero, Santiago; San-Cristobal, Rodrigo; Lambrinou, Christina-Paulina; Moschonis, George; Surwillo, Agnieszka; Godlewska, Magdalena; Goris, Annelies; Hoonhout, Jettie; Drevon, Christian A; Manios, Yannis; Traczyk, Iwona; Walsh, Marianne C; Gibney, Eileen R; Brennan, Lorraine; Martinez, J Alfredo; Lovegrove, Julie A; Gibney, Michael J; Daniel, Hannelore; Mathers, John C; Saris, Wim HM

2015-01-01

Background The high prevalence of physical inactivity worldwide calls for innovative and more effective ways to promote physical activity (PA). There are limited objective data on the effectiveness of Web-based personalized feedback on increasing PA in adults. Objective It is hypothesized that providing personalized advice based on PA measured objectively alongside diet, phenotype, or genotype information would lead to larger and more sustained changes in PA, compared with nonpersonalized advice. Methods A total of 1607 adults in seven European countries were randomized to either a control group (nonpersonalized advice, Level 0, L0) or to one of three personalized groups receiving personalized advice via the Internet based on current PA plus diet (Level 1, L1), PA plus diet and phenotype (Level 2, L2), or PA plus diet, phenotype, and genotype (Level 3, L3). PA was measured for 6 months using triaxial accelerometers, and self-reported using the Baecke questionnaire. Outcomes were objective and self-reported PA after 3 and 6 months. Results While 1270 participants (85.81% of 1480 actual starters) completed the 6-month trial, 1233 (83.31%) self-reported PA at both baseline and month 6, but only 730 (49.32%) had sufficient objective PA data at both time points. For the total cohort after 6 months, a greater improvement in self-reported total PA (P=.02) and PA during leisure (nonsport) (P=.03) was observed in personalized groups compared with the control group. For individuals advised to increase PA, we also observed greater improvements in those two self-reported indices (P=.006 and P=.008, respectively) with increased personalization of the advice (L2 and L3 vs L1). However, there were no significant differences in accelerometer results between personalized and control groups, and no significant effect of adding phenotypic or genotypic information to the tailored feedback at month 3 or 6. After 6 months, there were small but significant improvements in the objectively measured physical activity level (P<.05), moderate PA (P<.01), and sedentary time (P<.001) for individuals advised to increase PA, but these changes were similar across all groups. Conclusions Different levels of personalization produced similar small changes in objective PA. We found no evidence that personalized advice is more effective than conventional “one size fits all” guidelines to promote changes in PA in our Web-based intervention when PA was measured objectively. Based on self-reports, PA increased to a greater extent with more personalized advice. Thus, it is crucial to measure PA objectively in any PA intervention study. Trial Registration ClinicalTrials.gov NCT01530139; http://clinicaltrials.gov/show/NCT01530139 (Archived by WebCite at: http://www.webcitation.org/6XII1QwHz) PMID:26467573

Development of Rock Engineering Systems-Based Models for Flyrock Risk Analysis and Prediction of Flyrock Distance in Surface Blasting

NASA Astrophysics Data System (ADS)

Faramarzi, Farhad; Mansouri, Hamid; Farsangi, Mohammad Ali Ebrahimi

2014-07-01

The environmental effects of blasting must be controlled in order to comply with regulatory limits. Because of safety concerns and risk of damage to infrastructures, equipment, and property, and also having a good fragmentation, flyrock control is crucial in blasting operations. If measures to decrease flyrock are taken, then the flyrock distance would be limited, and, in return, the risk of damage can be reduced or eliminated. This paper deals with modeling the level of risk associated with flyrock and, also, flyrock distance prediction based on the rock engineering systems (RES) methodology. In the proposed models, 13 effective parameters on flyrock due to blasting are considered as inputs, and the flyrock distance and associated level of risks as outputs. In selecting input data, the simplicity of measuring input data was taken into account as well. The data for 47 blasts, carried out at the Sungun copper mine, western Iran, were used to predict the level of risk and flyrock distance corresponding to each blast. The obtained results showed that, for the 47 blasts carried out at the Sungun copper mine, the level of estimated risks are mostly in accordance with the measured flyrock distances. Furthermore, a comparison was made between the results of the flyrock distance predictive RES-based model, the multivariate regression analysis model (MVRM), and, also, the dimensional analysis model. For the RES-based model, R 2 and root mean square error (RMSE) are equal to 0.86 and 10.01, respectively, whereas for the MVRM and dimensional analysis, R 2 and RMSE are equal to (0.84 and 12.20) and (0.76 and 13.75), respectively. These achievements confirm the better performance of the RES-based model over the other proposed models.

Machine Learning-based Individual Assessment of Cortical Atrophy Pattern in Alzheimer's Disease Spectrum: Development of the Classifier and Longitudinal Evaluation.

PubMed

Lee, Jin San; Kim, Changsoo; Shin, Jeong-Hyeon; Cho, Hanna; Shin, Dae-Seock; Kim, Nakyoung; Kim, Hee Jin; Kim, Yeshin; Lockhart, Samuel N; Na, Duk L; Seo, Sang Won; Seong, Joon-Kyung

2018-03-07

To develop a new method for measuring Alzheimer's disease (AD)-specific similarity of cortical atrophy patterns at the individual-level, we employed an individual-level machine learning algorithm. A total of 869 cognitively normal (CN) individuals and 473 patients with probable AD dementia who underwent high-resolution 3T brain MRI were included. We propose a machine learning-based method for measuring the similarity of an individual subject's cortical atrophy pattern with that of a representative AD patient cohort. In addition, we validated this similarity measure in two longitudinal cohorts consisting of 79 patients with amnestic-mild cognitive impairment (aMCI) and 27 patients with probable AD dementia. Surface-based morphometry classifier for discriminating AD from CN showed sensitivity and specificity values of 87.1% and 93.3%, respectively. In the longitudinal validation study, aMCI-converts had higher atrophy similarity at both baseline (p < 0.001) and first year visits (p < 0.001) relative to non-converters. Similarly, AD patients with faster decline had higher atrophy similarity than slower decliners at baseline (p = 0.042), first year (p = 0.028), and third year visits (p = 0.027). The AD-specific atrophy similarity measure is a novel approach for the prediction of dementia risk and for the evaluation of AD trajectories on an individual subject level.

Post-PRK corneal scatter measurements with a scanning confocal slit photon counter

NASA Astrophysics Data System (ADS)

Taboada, John; Gaines, David; Perez, Mary A.; Waller, Steve G.; Ivan, Douglas J.; Baldwin, J. Bruce; LoRusso, Frank; Tutt, Ronald C.; Perez, Jose; Tredici, Thomas; Johnson, Dan A.

2000-06-01

Increased corneal light scatter or 'haze' has been associated with excimer laser photorefractive surgery of the cornea. The increased scatter can affect visual performance; however, topical steroid treatment post surgery substantially reduces the post PRK scatter. For the treatment and monitoring of the scattering characteristics of the cornea, various methods have been developed to objectively measure the magnitude of the scatter. These methods generally can measure scatter associated with clinically observable levels of haze. For patients with moderate to low PRK corrections receiving steroid treatment, measurement becomes fairly difficult as the haze clinical rating is non observable. The goal of this development was to realize an objective, non-invasive physical measurement that could produce a significant reading for any level including the background present in a normal cornea. As back-scatter is the only readily accessible observable, the instrument is based on this measurement. To achieve this end required the use of a confocal method to bias out the background light that would normally confound conventional methods. A number of subjects with nominal refractive errors in an Air Force study have undergone PRK surgery. A measurable increase in corneal scatter has been observed in these subjects whereas clinical ratings of the haze were noted as level zero. Other favorable aspects of this back-scatter based instrument include an optical capability to perform what is equivalent to an optical A-scan of the anterior chamber. Lens scatter can also be measured.

Mass spectrometry based proteomics: existing capabilities and future directions

PubMed Central

Angel, Thomas E.; Aryal, Uma K.; Hengel, Shawna M.; Baker, Erin S.; Kelly, Ryan T.; Robinson, Errol W.; Smith, Richard D.

2012-01-01

Mass spectrometry (MS)-based proteomics is emerging as a broadly effective means for identification, characterization, and quantification of proteins that are integral components of the processes essential for life. Characterization of proteins at the proteome and sub-proteome (e.g., the phosphoproteome, proteoglycome, or degradome/peptidome) levels provides a foundation for understanding fundamental aspects of biology. Emerging technologies such as ion mobility separations coupled with MS and microchip-based-proteome measurements combined with MS instrumentation and chromatographic separation techniques, such as nanoscale reversed phase liquid chromatography and capillary electrophoresis, show great promise for both broad undirected and targeted highly sensitive measurements. MS-based proteomics is increasingly contribute to our understanding of the dynamics, interactions, and roles that proteins and peptides play, advancing our understanding of biology on a systems wide level for a wide range of applications including investigations of microbial communities, bioremediation, and human health. PMID:22498958

Macular pigment and lens optical density measurements-evaluating a flicker machine with novel features

NASA Astrophysics Data System (ADS)

Mukherjee, Anirbaan

Age related macular degeneration (AMD) is one of the leading causes of blindness amongst the elderly. Macular pigment (MP) in the retina has been established to protect individuals against AMD. Improving levels of MP by diet or supplements is the constant quest of clinical practitioners and researchers, thus necessitating development of instruments capable of repeatable and reliable MP measurement. Cataract, a consequence of the rising opacity levels of the lens with age is one of the other major causes of blindness in the world. Mapcatsf, a LED-based microprocessor-controlled heterochromatic flicker photometer (HFP) using photopic vision is capable of measuring the levels of MP and the opacity of the lens in terms of optical density. Test-retest measurements conducted on 83 subjects were analyzed for repeatability in macular pigment optical density (MPOD) measurements. Reliability of the lens optical density (LOD) measurements were tested and compared with those obtained at absolute scotopic thresholds for 25 individuals. A supplement study with 32 individuals both in the young (50) age groups for 6 months further established Mapcatsf's capacity to monitor changing levels of MP in individuals. As an overall outcome, high levels of repeatability and reliability were obtained in MPOD and LOD measurements establishing Mapcatsf as an instrument for use in clinical settings in the future.

Examining Readability Estimates' Predictions of Students' Oral Reading Rate: Spache, Lexile, and Forcast

ERIC Educational Resources Information Center

Ardoin, Scott P.; Williams, Jessica C.; Christ, Theodore J.; Klubnik, Cynthia; Wellborn, Claire

2010-01-01

Beyond reliability and validity, measures used to model student growth must consist of multiple probes that are equivalent in level of difficulty to establish consistent measurement conditions across time. Although existing evidence supports the reliability of curriculum-based measurement in reading (CBMR), few studies have empirically evaluated…

Family, community and clinic collaboration to treat overweight and obese children: Stanford GOALS-A randomized controlled trial of a three-year, multi-component, multi-level, multi-setting intervention.

PubMed

Robinson, Thomas N; Matheson, Donna; Desai, Manisha; Wilson, Darrell M; Weintraub, Dana L; Haskell, William L; McClain, Arianna; McClure, Samuel; Banda, Jorge A; Sanders, Lee M; Haydel, K Farish; Killen, Joel D

2013-11-01

To test the effects of a three-year, community-based, multi-component, multi-level, multi-setting (MMM) approach for treating overweight and obese children. Two-arm, parallel group, randomized controlled trial with measures at baseline, 12, 24, and 36 months after randomization. Seven through eleven year old, overweight and obese children (BMI ≥ 85th percentile) and their parents/caregivers recruited from community locations in low-income, primarily Latino neighborhoods in Northern California. Families are randomized to the MMM intervention versus a community health education active-placebo comparison intervention. Interventions last for three years for each participant. The MMM intervention includes a community-based after school team sports program designed specifically for overweight and obese children, a home-based family intervention to reduce screen time, alter the home food/eating environment, and promote self-regulatory skills for eating and activity behavior change, and a primary care behavioral counseling intervention linked to the community and home interventions. The active-placebo comparison intervention includes semi-annual health education home visits, monthly health education newsletters for children and for parents/guardians, and a series of community-based health education events for families. Body mass index trajectory over the three-year study. Secondary outcome measures include waist circumference, triceps skinfold thickness, accelerometer-measured physical activity, 24-hour dietary recalls, screen time and other sedentary behaviors, blood pressure, fasting lipids, glucose, insulin, hemoglobin A1c, C-reactive protein, alanine aminotransferase, and psychosocial measures. The Stanford GOALS trial is testing the efficacy of a novel community-based multi-component, multi-level, multi-setting treatment for childhood overweight and obesity in low-income, Latino families. © 2013 Elsevier Inc. All rights reserved.

Estimation of combined sewer overflow discharge: a software sensor approach based on local water level measurements.

PubMed

Ahm, Malte; Thorndahl, Søren; Nielsen, Jesper E; Rasmussen, Michael R

2016-12-01

Combined sewer overflow (CSO) structures are constructed to effectively discharge excess water during heavy rainfall, to protect the urban drainage system from hydraulic overload. Consequently, most CSO structures are not constructed according to basic hydraulic principles for ideal measurement weirs. It can, therefore, be a challenge to quantify the discharges from CSOs. Quantification of CSO discharges are important in relation to the increased environmental awareness of the receiving water bodies. Furthermore, CSO discharge quantification is essential for closing the rainfall-runoff mass-balance in combined sewer catchments. A closed mass-balance is an advantage for calibration of all urban drainage models based on mass-balance principles. This study presents three different software sensor concepts based on local water level sensors, which can be used to estimate CSO discharge volumes from hydraulic complex CSO structures. The three concepts were tested and verified under real practical conditions. All three concepts were accurate when compared to electromagnetic flow measurements.

Major Influence of Tropical Volcanic Eruptions on the Stratospheric Aerosol Layer During the Last Decade

NASA Technical Reports Server (NTRS)

Vernier, Jean-Paul; Thomason, Larry W.; Pommereau, J.-P.; Bourassa, Adam; Pelon, Jacques; Garnier, Anne; Hauchecorne, A.; Blanot, L.; Trepte, Charles R.; Degenstein, Doug;

One-dimensional angular-measurement-based stitching interferometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Lei; Xue, Junpeng; Gao, Bo

In this paper, we present one-dimensional stitching interferometry based on the angular measurement for high-precision mirror metrology. The tilt error introduced by the stage motion during the stitching process is measured by an extra angular measurement device. The local profile measured by the interferometer in a single field of view is corrected using the measured angle before the piston adjustment in the stitching process. Comparing to the classical software stitching technique, the angle measuring stitching technique is more reliable and accurate in profiling mirror surface at the nanometer level. Experimental results demonstrate the feasibility of the proposed stitching technique. Basedmore » on our measurements, the typical repeatability within 200 mm scanning range is 0.5 nm RMS or less.« less

One-dimensional angular-measurement-based stitching interferometry

DOE PAGES

Huang, Lei; Xue, Junpeng; Gao, Bo; ...

2018-04-05

In this paper, we present one-dimensional stitching interferometry based on the angular measurement for high-precision mirror metrology. The tilt error introduced by the stage motion during the stitching process is measured by an extra angular measurement device. The local profile measured by the interferometer in a single field of view is corrected using the measured angle before the piston adjustment in the stitching process. Comparing to the classical software stitching technique, the angle measuring stitching technique is more reliable and accurate in profiling mirror surface at the nanometer level. Experimental results demonstrate the feasibility of the proposed stitching technique. Basedmore » on our measurements, the typical repeatability within 200 mm scanning range is 0.5 nm RMS or less.« less

Assessment of an organ-based tube current modulation in thoracic computed tomography.

PubMed

Matsubara, Kosuke; Sugai, Mai; Toyoda, Asami; Koshida, Haruka; Sakuta, Keita; Takata, Tadanori; Koshida, Kichiro; Iida, Hiroji; Matsui, Osamu

2012-03-08

Recently, specific computed tomography (CT) scanners have been equipped with organ-based tube current modulation (TCM) technology. It is possible that organ-based TCM will replace the conventional dose-reduction technique of reducing the effective milliampere-second. The aim of this study was to determine if organ-based TCM could reduce radiation exposure to the breasts without compromising the image uniformity and beam hardening effect in thoracic CT examinations. Breast and skin radiation doses and the absorbed radiation dose distribution within a single section were measured with an anthropomorphic phantom and radiophotoluminescent glass dosimeters using four approaches to thoracic CT (reference, organ-based TCM, copper shielding, and the combination of the above two techniques, hereafter referred to as the combination technique). The CT value and noise level were measured using the same calibration phantom. Organ-based TCM and copper shielding reduced radiation doses to the breast by 23.7% and 21.8%, respectively. However, the CT value increased, especially in the anterior region, using copper shielding. In contrast, the CT value and noise level barely increased using organ-based TCM. The combination technique reduced the radiation dose to the breast by 38.2%, but greatly increased the absorbed radiation dose from the central to the posterior regions. Moreover, the CT value increased in the anterior region and the noise level increased by more than 10% in the entire region. Therefore, organ-based TCM can reduce radiation doses to breasts with only small increases in noise levels, making it preferable for specific groups of patients, such as children and young women.

Core measures for developmentally supportive care in neonatal intensive care units: theory, precedence and practice

PubMed Central

Coughlin, Mary; Gibbins, Sharyn; Hoath, Steven

2009-01-01

Title Core measures for developmentally supportive care in neonatal intensive care units: theory, precedence and practice. Aim This paper is a discussion of evidence-based core measures for developmental care in neonatal intensive care units. Background Inconsistent definition, application and evaluation of developmental care have resulted in criticism of its scientific merit. The key concept guiding data organization in this paper is the United States of America’s Joint Commission’s concept of ‘core measures’ for evaluating and accrediting healthcare organizations. This concept is applied to five disease- and procedure-independent measures based on the Universe of Developmental Care model. Data sources Electronically accessible, peer reviewed studies on developmental care published in English were culled for data supporting the selected objective core measures between 1978 and 2008. The quality of evidence was based on a structured predetermined format that included three independent reviewers. Systematic reviews and randomized control trials were considered the strongest level of evidence. When unavailable, cohort, case control, consensus statements and qualitative methods were considered the strongest level of evidence for a particular clinical issue. Discussion Five core measure sets for evidence-based developmental care were evaluated: (1) protected sleep, (2) pain and stress assessment and management, (3) developmental activities of daily living, (4) family-centred care, and (5) the healing environment. These five categories reflect recurring themes that emerged from the literature review regarding developmentally supportive care and quality caring practices in neonatal populations. This practice model provides clear metrics for nursing actions having an impact on the hospital experience of infant-family dyads. Conclusion Standardized disease-independent core measures for developmental care establish minimum evidence-based practice expectations and offer an objective basis for cross-institutional comparison of developmental care programmes. PMID:19686402

Investigating the Relationship of Late Pleistocene Terrace Formation and Channel Dynamics within the Texas Gulf Coastal Plain

NASA Astrophysics Data System (ADS)

Ellis, T.; Hassenruck-Gudipati, H. J.; Mohrig, D. C.; Goudge, T. A.

2016-12-01

Terrace formation along coastal rivers is often assumed to be a direct result of punctuated sea-level fall. However, it has been experimentally shown that terraces commonly form under conditions of constant base level fall. In addition, it has been demonstrated that migrating channels in a bedrock system with steady state rock uplift can produce similar looking terraces. The lower Trinity River, in East Texas, is an ideal location to study allogenic (punctuated external forcing) versus autogenic terrace-building mechanisms using lidar measurements and OSL depositional age constraints (Gavin, 2005). To understand paleochannel influence on terrace construction, we measured channel characteristics for 27 preserved segments of paleochannels that are late Pleistocene in age and associated with 27 of 34 measured terraces along about 90 km of the modern river. There is no clear clustering of terrace elevation that might be tied to distinct sea level change events. Rather, the range of mean terrace elevations is indicative of a more constant system transformation. Based on lidar measurements, all paleochannels are larger than the modern channel, suggesting a wetter climate or larger watershed. Channel width measurements are used to quantify these changes in paleoflow discharge. Paleochannel width, radius of curvature and terrace slope measurements are used to characterize the movement of an incising channel. Based upon OSL terrace dates (Gavin, 2005), known global climate variations can be compared to discharge estimates and investigated as a predictor of terrace formation. If terrace formation occurred during distinct intervals of sea level fall, terraces with similar calculated paleoflow discharges are expected to plot along specific downstream elevation profiles. Assuming avulsion-driven terrace formation occurs at locations of higher channel sinuosity, the sinuosity of paleochannels on terraces is compared to the sinuosity of the modern river. Higher paleo-sinuosity would indicate preferential terrace formation at avulsion prone channel bends. Many factors may contribute to terrace formation during sea level fall and as such, we seek correlations between paleochannel morphology and terrace characteristics to distinguish between different terrace forming mechanisms.

Review of the hydrologic data-collection network in the St Joseph River basin, Indiana

USGS Publications Warehouse

Crompton, E.J.; Peters, J.G.; Miller, R.L.; Stewart, J.A.; Banaszak, K.J.; Shedlock, R.J.

1986-01-01

The St. Joseph River Basin data-collection network in the St. Joseph River for streamflow, lake, ground water, and climatic stations was reviewed. The network review included only the 1700 sq mi part of the basin in Indiana. The streamflow network includes 11 continuous-record gaging stations and one partial-record station. Based on areal distribution, lake effect , contributing drainage area, and flow-record ratio, six of these stations can be used to describe regional hydrology. Gaging stations on lakes are used to collect long-term lake-level data on which to base legal lake levels, and to monitor lake-level fluctuations after legal levels are established. More hydrogeologic data are needed for determining the degree to which grouhd water affects lake levels. The current groundwater network comprises 15 observation wells and has four purposes: (1) to determine the interaction between groundwater and lakes; (2) to measure changes in groundwater levels near irrigation wells; (3) to measure water levels in wells at special purpose sites; and (4) to measure long-term changes in water levels in areas not affected by pumping. Seven wells near three lakes have provided sufficient information for correlating water levels in wells and lakes but are not adequate to quantify the effect of groundwater on lake levels. Water levels in five observation wells located in the vicinity of intensive irrigation are not noticeably affected by seasonal withdrawals. The National Weather Sevice operates eight climatic stations in the basin primarily to characterize regional climatic conditions and to aid in flood forecasting. The network meets network-density guidelines established by the World Meterological Organization for collection of precipitation and evaporation data but not guidelines suggested by the National Weather Service for density of precipitation gages in areas of significant convective rainfalls. (Author 's abstract)

Inertial Measurements for Aero-assisted Navigation (IMAN)

NASA Technical Reports Server (NTRS)

Jah, Moriba; Lisano, Michael; Hockney, George

2007-01-01

IMAN is a Python tool that provides inertial sensor-based estimates of spacecraft trajectories within an atmospheric influence. It provides Kalman filter-derived spacecraft state estimates based upon data collected onboard, and is shown to perform at a level comparable to the conventional methods of spacecraft navigation in terms of accuracy and at a higher level with regard to the availability of results immediately after completion of an atmospheric drag pass.

The Group Delay and Suppression Pattern of the Cochlear Microphonic Potential Recorded at the Round Window

PubMed Central

He, Wenxuan; Porsov, Edward; Kemp, David; Nuttall, Alfred L.; Ren, Tianying

2012-01-01

Background It is commonly assumed that the cochlear microphonic potential (CM) recorded from the round window (RW) is generated at the cochlear base. Based on this assumption, the low-frequency RW CM has been measured for evaluating the integrity of mechanoelectrical transduction of outer hair cells at the cochlear base and for studying sound propagation inside the cochlea. However, the group delay and the origin of the low-frequency RW CM have not been demonstrated experimentally. Methodology/Principal Findings This study quantified the intra-cochlear group delay of the RW CM by measuring RW CM and vibrations at the stapes and basilar membrane in gerbils. At low sound levels, the RW CM showed a significant group delay and a nonlinear growth at frequencies below 2 kHz. However, at high sound levels or at frequencies above 2 kHz, the RW CM magnitude increased proportionally with sound pressure, and the CM phase in respect to the stapes showed no significant group delay. After the local application of tetrodotoxin the RW CM below 2 kHz became linear and showed a negligible group delay. In contrast to RW CM phase, the BM vibration measured at location ∼2.5 mm from the base showed high sensitivity, sharp tuning, and nonlinearity with a frequency-dependent group delay. At low or intermediate sound levels, low-frequency RW CMs were suppressed by an additional tone near the probe-tone frequency while, at high sound levels, they were partially suppressed only at high frequencies. Conclusions/Significance We conclude that the group delay of the RW CM provides no temporal information on the wave propagation inside the cochlea, and that significant group delay of low-frequency CMs results from the auditory nerve neurophonic potential. Suppression data demonstrate that the generation site of the low-frequency RW CM shifts from apex to base as the probe-tone level increases. PMID:22470560

Automated detection of heuristics and biases among pathologists in a computer-based system.

PubMed

Crowley, Rebecca S; Legowski, Elizabeth; Medvedeva, Olga; Reitmeyer, Kayse; Tseytlin, Eugene; Castine, Melissa; Jukic, Drazen; Mello-Thoms, Claudia

2013-08-01

The purpose of this study is threefold: (1) to develop an automated, computer-based method to detect heuristics and biases as pathologists examine virtual slide cases, (2) to measure the frequency and distribution of heuristics and errors across three levels of training, and (3) to examine relationships of heuristics to biases, and biases to diagnostic errors. The authors conducted the study using a computer-based system to view and diagnose virtual slide cases. The software recorded participant responses throughout the diagnostic process, and automatically classified participant actions based on definitions of eight common heuristics and/or biases. The authors measured frequency of heuristic use and bias across three levels of training. Biases studied were detected at varying frequencies, with availability and search satisficing observed most frequently. There were few significant differences by level of training. For representativeness and anchoring, the heuristic was used appropriately as often or more often than it was used in biased judgment. Approximately half of the diagnostic errors were associated with one or more biases. We conclude that heuristic use and biases were observed among physicians at all levels of training using the virtual slide system, although their frequencies varied. The system can be employed to detect heuristic use and to test methods for decreasing diagnostic errors resulting from cognitive biases.

Central hypothyroidism - a neglected thyroid disorder.

PubMed

Beck-Peccoz, Paolo; Rodari, Giulia; Giavoli, Claudia; Lania, Andrea

2017-10-01

Central hypothyroidism is a rare and heterogeneous disorder that is characterized by a defect in thyroid hormone secretion in an otherwise normal thyroid gland due to insufficient stimulation by TSH. The disease results from the abnormal function of the pituitary gland, the hypothalamus, or both. Moreover, central hypothyroidism can be isolated or combined with other pituitary hormone deficiencies, which are mostly acquired and are rarely congenital. The clinical manifestations of central hypothyroidism are usually milder than those observed in primary hypothyroidism. Obtaining a positive diagnosis for central hypothyroidism can be difficult from both a clinical and a biochemical perspective. The diagnosis of central hypothyroidism is based on low circulating levels of free T 4 in the presence of low to normal TSH concentrations. The correct diagnosis of both acquired (also termed sporadic) and congenital (also termed genetic) central hypothyroidism can be hindered by methodological interference in free T 4 or TSH measurements; routine utilization of total T 4 or T 3 measurements; concurrent systemic illness that is characterized by low levels of free T 4 and normal TSH concentrations; the use of the sole TSH-reflex strategy, which is the measurement of the sole level of TSH, without free T 4 , if levels of TSH are in the normal range; and the diagnosis of congenital hypothyroidism based on TSH analysis without the concomitant measurement of serum levels of T 4 . In this Review, we discuss current knowledge of the causes of central hypothyroidism, emphasizing possible pitfalls in the diagnosis and treatment of this disorder.

Agreement Between Home-Based Measurement of Stool Calprotectin and ELISA Results for Monitoring Inflammatory Bowel Disease Activity.

PubMed

Heida, Anke; Knol, Mariska; Kobold, Anneke Muller; Bootsman, Josette; Dijkstra, Gerard; van Rheenen, Patrick F

2017-11-01

An increasing number of physicians use repeated measurements of stool calprotectin to monitor intestinal inflammation in patients with inflammatory bowel diseases (IBDs). A lateral flow-based rapid test allows patients to measure their own stool calprotectin values at home. The test comes with a software application (IBDoc; Bühlmann Laboratories AG, Schönenbuch, Switzerland) that turns a smartphone camera into a results reader. We compared results from this method with those from the hospital-based reader (Quantum Blue; Bühlmann Laboratories AG) and enzyme-linked immunosorbent assay (ELISA) analysis. In a single-center comparison study, we asked 101 participants (10 years of age or older) in the Netherlands to perform the IBDoc measurement on stool samples collected at home, from June 2015 to October 2016. Participants then sent the residual extraction fluid and a fresh specimen from the same bowel movement to our pediatric and adult IBD center at the University Medical Center Groningen, where the level of calprotectin was measured by the Quantum Blue reader and ELISA analysis, respectively. The primary outcome was the agreement of results between IBDoc and the Quantum Blue and ELISA analyses, determined by Bland-Altman plot analysis. We received 152 IBDoc results, 138 samples of residual extraction fluid for Quantum Blue analysis, and 170 fresh stool samples for ELISA analysis. Spearman's rank correlation coefficient was 0.94 for results obtained by IBDoc vs Quantum Blue and 0.85 for results obtained by IBDoc vs ELISA. At the low range of calprotectin level (<500 μg/g), 91% of IBDoc-Quantum Blue results were within the predefined limits of agreement (±100 μg/g), and 71% of IBDoc-ELISA results were in agreement. At the high range of calprotectin level (≥500 μg/g), 81% of IBDoc-Quantum Blue results were within the predefined limits of agreement (±200 μg/g) and 64% of IBDoc-ELISA results were in agreement. Measurements of fecal levels of calprotectin made with home-based lateral flow method were in agreement with measurements made by Quantum Blue and ELISA, as long as concentrations were <500 μg/g. For patients with concentrations of fecal calprotectin above this level, findings from IBDoc should be confirmed by another method. (Netherlands Trial Registration Number: NTR5133). Copyright © 2017 AGA Institute. Published by Elsevier Inc. All rights reserved.

Measurement and analysis of radiofrequency radiations from some mobile phone base stations in Ghana.

PubMed

Amoako, J K; Fletcher, J J; Darko, E O

2009-08-01

A survey of the radiofrequency electromagnetic radiation at public access points in the vicinity of 50 cellular phone base stations has been carried out. The primary objective was to measure and analyse the electromagnetic field strength levels emitted by antennae installed and operated by the Ghana Telecommunications Company. On all the sites measurements were made using a hand-held spectrum analyser to determine the electric field level with the 900 and 1800 MHz frequency bands. The results indicated that power densities at public access points varied from as low as 0.01 microW m(-2) to as high as 10 microW m(-2) for the frequency of 900 MHz. At a transmission frequency of 1800 MHz, the variation of power densities is from 0.01 to 100 microW m(-2). The results were found to be in compliant with the International Commission on Non-ionizing Radiological Protection guidance level but were 20 times higher than the results generally obtained for such a practice elsewhere. There is therefore a need to re-assess the situation to ensure reduction in the present level as an increase in mobile phone usage is envisaged within the next few years.

Development of a psychological test to measure ability-based emotional intelligence in the Indonesian workplace using an item response theory

PubMed Central

Fajrianthi; Zein, Rizqy Amelia

2017-01-01

This study aimed to develop an emotional intelligence (EI) test that is suitable to the Indonesian workplace context. Airlangga Emotional Intelligence Test (Tes Kecerdasan Emosi Airlangga [TKEA]) was designed to measure three EI domains: 1) emotional appraisal, 2) emotional recognition, and 3) emotional regulation. TKEA consisted of 120 items with 40 items for each subset. TKEA was developed based on the Situational Judgment Test (SJT) approach. To ensure its psychometric qualities, categorical confirmatory factor analysis (CCFA) and item response theory (IRT) were applied to test its validity and reliability. The study was conducted on 752 participants, and the results showed that test information function (TIF) was 3.414 (ability level = 0) for subset 1, 12.183 for subset 2 (ability level = −2), and 2.398 for subset 3 (level of ability = −2). It is concluded that TKEA performs very well to measure individuals with a low level of EI ability. It is worth to note that TKEA is currently at the development stage; therefore, in this study, we investigated TKEA’s item analysis and dimensionality test of each TKEA subset. PMID:29238234

The effect of the work environment and performance-based self-esteem on cognitive stress symptoms among Danish knowledge workers.

PubMed

Albertsen, Karen; Rugulies, Reiner; Garde, Anne Helene; Burr, Hermann

2010-02-01

Interpersonal relations at work as well as individual factors seem to play prominent roles in the modern labour market, and arguably also for the change in stress symptoms. The aim was to examine whether exposures in the psychosocial work environment predicted symptoms of cognitive stress in a sample of Danish knowledge workers (i.e. employees working with sign, communication or exchange of knowledge) and whether performance-based self-esteem had a main effect, over and above the work environmental factors. 349 knowledge workers, selected from a national, representative cohort study, were followed up with two data collections, 12 months apart. We used data on psychosocial work environment factors and cognitive stress symptoms measured with the Copenhagen Psychosocial Questionnaire (COPSOQ), and a measurement of performance-based self-esteem. Effects on cognitive stress symptoms were analyzed with a GLM procedure with and without adjustment for baseline level. Measures at baseline of quantitative demands, role conflicts, lack of role clarity, recognition, predictability, influence and social support from management were positively associated with cognitive stress symptoms 12 months later. After adjustment for baseline level of cognitive stress symptoms, follow-up level was only predicted by lack of predictability. Performance-based self-esteem was prospectively associated with cognitive stress symptoms and had an independent effect above the psychosocial work environment factors on the level of and changes in cognitive stress symptoms. The results suggest that both work environmental and individual characteristics should be taken into account in order to capture sources of stress in modern working life.

Vertical distribution of aerosols in the vicinity of Mexico City during MILAGRO-2006 Campaign

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewandowski, P.A.; Kleinman, L.; Eichinger, W. E.

On 7 March 2006, a mobile, ground-based, vertical pointing, elastic lidar system made a North-South transect through the Mexico City basin. Column averaged, aerosol size distribution (ASD) measurements were made on the ground concurrently with the lidar measurements. The ASD ground measurements allowed calculation of the column averaged mass extinction efficiency (MEE) for the lidar system (1064 nm). The value of column averaged MEE was combined with spatially resolved lidar extinction coefficients to produce total aerosol mass concentration estimates with the resolution of the lidar (1.5 m vertical spatial and 1 s temporal). Airborne ASD measurements from DOE G-1 aircraftmore » made later in the day on 7 March 2006, allowed the evaluation of the assumptions of constant ASD with height and time used for estimating the column averaged MEE. The results showed that the aerosol loading within the basin is about twice what is observed outside of the basin. The total aerosol base concentrations observed in the basin are of the order of 200 {mu}g/m{sup 3} and the base levels outside are of the order of 100 {mu}g/m{sup 3}. The local heavy traffic events can introduce aerosol levels near the ground as high as 900 {mu}g/m{sup 3}. The article presents the methodology for estimating aerosol mass concentration from mobile, ground-based lidar measurements in combination with aerosol size distribution measurements. An uncertainty analysis of the methodology is also presented.« less

Measurement of glucose concentration by image processing of thin film slides

NASA Astrophysics Data System (ADS)

Piramanayagam, Sankaranaryanan; Saber, Eli; Heavner, David

2012-02-01

Measurement of glucose concentration is important for diagnosis and treatment of diabetes mellitus and other medical conditions. This paper describes a novel image-processing based approach for measuring glucose concentration. A fluid drop (patient sample) is placed on a thin film slide. Glucose, present in the sample, reacts with reagents on the slide to produce a color dye. The color intensity of the dye formed varies with glucose at different concentration levels. Current methods use spectrophotometry to determine the glucose level of the sample. Our proposed algorithm uses an image of the slide, captured at a specific wavelength, to automatically determine glucose concentration. The algorithm consists of two phases: training and testing. Training datasets consist of images at different concentration levels. The dye-occupied image region is first segmented using a Hough based technique and then an intensity based feature is calculated from the segmented region. Subsequently, a mathematical model that describes a relationship between the generated feature values and the given concentrations is obtained. During testing, the dye region of a test slide image is segmented followed by feature extraction. These two initial steps are similar to those done in training. However, in the final step, the algorithm uses the model (feature vs. concentration) obtained from the training and feature generated from test image to predict the unknown concentration. The performance of the image-based analysis was compared with that of a standard glucose analyzer.

The Usability of CAT System for Assessing the Depressive Level of Japanese-A Study on Psychometric Properties and Response Behavior.

PubMed

Iwata, Noboru; Kikuchi, Kenichi; Fujihara, Yuya

2016-08-01

An innovative measurement system using a computerized adaptive testing technique based on the item response theory (CAT) has been expanding to measure mental health status. However, little is known about details in its measurement properties based on the empirical data. Moreover, the response time (RT) data, which are not available by a paper-and-pencil measurement but available by a computerized measurement, would be worth investigating for exploring the response behavior. We aimed at constructing the CAT to measure depressive symptomatology in a community population and exploring its measurement properties. Also, we examined the relationships between RTs, individual item responses, and depressive levels. For constructing the CAT system, responses of 2061 workers and university students to 24 depression scale plus four negatively revised positive affect items were subjected to a polytomous IRT analysis. The stopping rule was set for standard error of estimation < 0.30 or the maximum 15 items displayed. The CAT and non-adaptive computer-based test (CBT) were administered to 209 undergraduates, and 168 of them administered again after 1 week. On average, the CAT was converged by 10.4 items. The θ values estimated by CAT and CBT were highly correlated (r = 0.94 and 0.95 for the 1st and 2nd measurements) and with the traditional scoring procedures (r's > 0.90). The test-retest reliability was at a satisfactory level (r = 0.86). RTs to some items significantly correlated with the θ estimates. The mean RT varied by the item contents and wording, i.e., the RT to positive affect items required additional 2 s or longer than the other subscale items. The CAT would be a reliable and practical measurement tool for various purposes including stress check at workplace.

An Optimal Estimation Method to Obtain Surface Layer Turbulent Fluxes from Profile Measurements

NASA Astrophysics Data System (ADS)

Kang, D.

2015-12-01

In the absence of direct turbulence measurements, the turbulence characteristics of the atmospheric surface layer are often derived from measurements of the surface layer mean properties based on Monin-Obukhov Similarity Theory (MOST). This approach requires two levels of the ensemble mean wind, temperature, and water vapor, from which the fluxes of momentum, sensible heat, and water vapor can be obtained. When only one measurement level is available, the roughness heights and the assumed properties of the corresponding variables at the respective roughness heights are used. In practice, the temporal mean with large number of samples are used in place of the ensemble mean. However, in many situations the samples of data are taken from multiple levels. It is thus desirable to derive the boundary layer flux properties using all measurements. In this study, we used an optimal estimation approach to derive surface layer properties based on all available measurements. This approach assumes that the samples are taken from a population whose ensemble mean profile follows the MOST. An optimized estimate is obtained when the results yield a minimum cost function defined as a weighted summation of all error variance at each sample altitude. The weights are based one sample data variance and the altitude of the measurements. This method was applied to measurements in the marine atmospheric surface layer from a small boat using radiosonde on a tethered balloon where temperature and relative humidity profiles in the lowest 50 m were made repeatedly in about 30 minutes. We will present the resultant fluxes and the derived MOST mean profiles using different sets of measurements. The advantage of this method over the 'traditional' methods will be illustrated. Some limitations of this optimization method will also be discussed. Its application to quantify the effects of marine surface layer environment on radar and communication signal propagation will be shown as well.

Estimation of single plane unbalance parameters of a rotor-bearing system using Kalman filtering based force estimation technique

NASA Astrophysics Data System (ADS)

Shrivastava, Akash; Mohanty, A. R.

2018-03-01

This paper proposes a model-based method to estimate single plane unbalance parameters (amplitude and phase angle) in a rotor using Kalman filter and recursive least square based input force estimation technique. Kalman filter based input force estimation technique requires state-space model and response measurements. A modified system equivalent reduction expansion process (SEREP) technique is employed to obtain a reduced-order model of the rotor system so that limited response measurements can be used. The method is demonstrated using numerical simulations on a rotor-disk-bearing system. Results are presented for different measurement sets including displacement, velocity, and rotational response. Effects of measurement noise level, filter parameters (process noise covariance and forgetting factor), and modeling error are also presented and it is observed that the unbalance parameter estimation is robust with respect to measurement noise.

Fiber-MZI-based FBG sensor interrogation: comparative study with a CCD spectrometer.

PubMed

Das, Bhargab; Chandra, Vikash

2016-10-10

We present an experimental comparative study of the two most commonly used fiber Bragg grating (FBG) sensor interrogation techniques: a charge-coupled device (CCD) spectrometer and a fiber Mach-Zehnder interferometer (F-MZI). Although the interferometric interrogation technique is historically known to offer the highest sensitivity measurements, very little information exists regarding how it compares with the current commercially available spectral-characteristics-based interrogation systems. It is experimentally established here that the performance of a modern-day CCD spectrometer interrogator is very close to a F-MZI interrogator with the capability of measuring Bragg wavelength shifts with sub-picometer-level accuracy. The results presented in this research study can further be used as a guideline for choosing between the two FBG sensor interrogator types for small-amplitude dynamic perturbation measurements down to nano-level strain.

UWB pulse detection and TOA estimation using GLRT

NASA Astrophysics Data System (ADS)

Xie, Yan; Janssen, Gerard J. M.; Shakeri, Siavash; Tiberius, Christiaan C. J. M.

2017-12-01

In this paper, a novel statistical approach is presented for time-of-arrival (TOA) estimation based on first path (FP) pulse detection using a sub-Nyquist sampling ultra-wide band (UWB) receiver. The TOA measurement accuracy, which cannot be improved by averaging of the received signal, can be enhanced by the statistical processing of a number of TOA measurements. The TOA statistics are modeled and analyzed for a UWB receiver using threshold crossing detection of a pulse signal with noise. The detection and estimation scheme based on the Generalized Likelihood Ratio Test (GLRT) detector, which captures the full statistical information of the measurement data, is shown to achieve accurate TOA estimation and allows for a trade-off between the threshold level, the noise level, the amplitude and the arrival time of the first path pulse, and the accuracy of the obtained final TOA.

The correlation of methylation levels measured using Illumina 450K and EPIC BeadChips in blood samples

PubMed Central

Logue, Mark W; Smith, Alicia K; Wolf, Erika J; Maniates, Hannah; Stone, Annjanette; Schichman, Steven A; McGlinchey, Regina E; Milberg, William; Miller, Mark W

2017-01-01

Aim: We examined concordance of methylation levels across the Illumina Infinium HumanMethylation450 BeadChip and the Infinium MethylationEPIC BeadChip. Methods: We computed the correlation for 145 whole blood DNA samples at each of the 422,524 CpG sites measured by both chips. Results: The correlation at some sites was high (up to r = 0.95), but many sites had low correlation (55% had r < 0.20). The low correspondence between 450K and EPIC measured methylation values at many loci was largely due to the low variability in methylation values for the majority of the CpG sites in blood. Conclusion: Filtering out probes based on the observed correlation or low variability may increase reproducibility of BeadChip-based epidemiological studies. PMID:28809127

Method for physiologic phenotype characterization at the single-cell level in non-interacting and interacting cells

PubMed Central

Ashili, Shashanka P.; Houkal, Jeff; Smith, Dean; Mohammadreza, Aida; Lee, Kristen B.; Forrester, Jessica; Kumar, Ashok; Anis, Yasser H.; Paulson, Thomas G.; Youngbull, Cody A.; Tian, Yanqing; Holl, Mark R.; Johnson, Roger H.; Meldrum, Deirdre R.

2012-01-01

Abstract. Intercellular heterogeneity is a key factor in a variety of core cellular processes including proliferation, stimulus response, carcinogenesis, and drug resistance. However, cell-to-cell variability studies at the single-cell level have been hampered by the lack of enabling experimental techniques. We present a measurement platform that features the capability to quantify oxygen consumption rates of individual, non-interacting and interacting cells under normoxic and hypoxic conditions. It is based on real-time concentration measurements of metabolites of interest by means of extracellular optical sensors in cell-isolating microwells of subnanoliter volume. We present the results of a series of measurements of oxygen consumption rates (OCRs) of individual non-interacting and interacting human epithelial cells. We measured the effects of cell-to-cell interactions by using the system’s capability to isolate two and three cells in a single well. The major advantages of the approach are: 1. ratiometric, intensity-based characterization of the metabolic phenotype at the single-cell level, 2. minimal invasiveness due to the distant positioning of sensors, and 3. ability to study the effects of cell-cell interactions on cellular respiration rates. PMID:22502580

Method for physiologic phenotype characterization at the single-cell level in non-interacting and interacting cells.

PubMed

Kelbauskas, Laimonas; Ashili, Shashanka P; Houkal, Jeff; Smith, Dean; Mohammadreza, Aida; Lee, Kristen B; Forrester, Jessica; Kumar, Ashok; Anis, Yasser H; Paulson, Thomas G; Youngbull, Cody A; Tian, Yanqing; Holl, Mark R; Johnson, Roger H; Meldrum, Deirdre R

2012-03-01

Intercellular heterogeneity is a key factor in a variety of core cellular processes including proliferation, stimulus response, carcinogenesis, and drug resistance. However, cell-to-cell variability studies at the single-cell level have been hampered by the lack of enabling experimental techniques. We present a measurement platform that features the capability to quantify oxygen consumption rates of individual, non-interacting and interacting cells under normoxic and hypoxic conditions. It is based on real-time concentration measurements of metabolites of interest by means of extracellular optical sensors in cell-isolating microwells of subnanoliter volume. We present the results of a series of measurements of oxygen consumption rates (OCRs) of individual non-interacting and interacting human epithelial cells. We measured the effects of cell-to-cell interactions by using the system's capability to isolate two and three cells in a single well. The major advantages of the approach are: 1. ratiometric, intensity-based characterization of the metabolic phenotype at the single-cell level, 2. minimal invasiveness due to the distant positioning of sensors, and 3. ability to study the effects of cell-cell interactions on cellular respiration rates. © 2012 Society of Photo-Optical Instrumentation Engineers (SPIE).

Transfer of knowledge from sound quality measurement to noise impact evaluation

NASA Astrophysics Data System (ADS)

Genuit, Klaus

2004-05-01

It is well known that the measurement and analysis of sound quality requires a complex procedure with consideration of the physical, psychoacoustical and psychological aspects of sound. Sound quality cannot be described only by a simple value based on A-weighted sound pressure level measurements. The A-weighted sound pressure level is sufficient to predict the probabilty that the human ear could be damaged by sound but the A-weighted level is not the correct descriptor for the annoyance of a complex sound situation given by several different sound events at different and especially moving positions (soundscape). On the one side, the consideration of the spectral distribution and the temporal pattern (psychoacoustics) is requested and, on the other side, the subjective attitude with respect to the sound situation, the expectation and experience of the people (psychology) have to be included in context with the complete noise impact evaluation. This paper describes applications of the newest methods of sound quality measurements-as it is well introduced at the car manufacturers-based on artifical head recordings and signal processing comparable to the human hearing used in noisy environments like community/traffic noise.

Ground-based sensors for the SR-71 sonic boom propagation experiment

NASA Technical Reports Server (NTRS)

Norris, Stephen R.; Haering, Edward A., Jr.; Murray, James E.

1995-01-01

This paper describes ground-level measurements of sonic boom signatures made as part of the SR-71 sonic boom propagation experiment recently completed at NASA Dryden Flight Research Center, Edwards, California. Ground level measurements were the final stage of this experiment which also included airborne measurements at near and intermediate distances from an SR-71 research aircraft. Three types of sensors were deployed to three station locations near the aircraft ground track. Pressure data were collected for flight conditions from Mach 1.25 to Mach 1.60 at altitudes from 30,000 to 48,000 ft. Ground-level measurement techniques, comparisons of data sets from different ground sensors, and sensor system strengths and weaknesses are discussed. The well-known N-wave structure dominated the sonic boom signatures generated by the SR-71 aircraft at most of these conditions. Variations in boom shape caused by atmospheric turbulence, focusing effects, or both were observed for several flights. Peak pressure and boom event duration showed some dependence on aircraft gross weight. The sonic boom signatures collected in this experiment are being compiled in a data base for distribution in support of the High Speed Research Program.

Quantification of the level of crowdedness for pedestrian movements

NASA Astrophysics Data System (ADS)

Duives, Dorine C.; Daamen, Winnie; Hoogendoorn, Serge P.

2015-06-01

Within the realm of pedestrian research numerous measures have been proposed to estimate the level of crowdedness experienced by pedestrians. However, within the field of pedestrian traffic flow modelling there does not seem to be consensus on the question which of these measures performs best. This paper shows that the shape and scatter within the resulting fundamental diagrams differs a lot depending on the measure of crowdedness used. The main aim of the paper is to establish the advantages and disadvantages of the currently existing measures to quantify crowdedness in order to evaluate which measures provide both accurate and consistent results. The assessment is not only based on the theoretical differences, but also on the qualitative and quantitative differences between the resulting fundamental diagrams computed using the crowdedness measures on one and the same data set. The qualitative and quantitative functioning of the classical Grid-based measure is compared to with the X-T measure, an Exponentially Weighted Distance measure, and a Voronoi-Diagram measure. The consistency of relating these measures for crowdedness to the two macroscopic flow variables velocity and flow, the computational efficiency and the amount of scatter present within the fundamental diagrams produced by the implementation of the different measures are reviewed. It is found that the Voronoi-Diagram and X-T measure are the most efficient and consistent measures for crowdedness.

Investing for Impact: The Global Fund Approach to Measurement of AIDS Response.

PubMed

Jain, Suman; Zorzi, Nathalie

2017-07-01

The Global Fund raises and invests nearly US$4 billion a year to support programs run in more than 140 countries. The Global Fund strategy 2012-2016 is focused on "Investing for Impact". In order to accomplish this, timely and accurate data are needed to inform strategies and prioritize activities to achieve greater coverage with quality services. Monitoring and evaluation is intrinsic to the Global Fund's system of performance-based funding. The Global Fund invests in strengthening measurement and reporting of results at all stages of the grant cycle. The Global Fund approach to measurement is based on three key principles-(1) simplified reporting: the Global Fund has updated its measurement guidance to focus on impact, coverage and quality with the use of a harmonized set of indicators. (2) Supporting data systems-based on a common framework developed and supported by partners, it promotes investment in five common data systems: routine reporting including HMIS; Surveys-population based and risk group surveys; Analysis, reviews and transparency; Administrative and financial data sources; and, Vital registration systems. (3) Strengthen data use: the Global Fund funding encourages use of data at all levels-national, subnational and site level. Countries do not automatically prioritize M&E but when guidance, tools and investments are available, there is high level utilization of M&E systems in program design, planning, implementation, and results reporting. An in-depth analysis of the available data helps the Global Fund and countries to direct investments towards interventions where impact could be achieved and focus on target population groups and geographic areas that are most affected.

Skinfold Thickness at 8 Common Cryotherapy Sites in Various Athletic Populations

PubMed Central

Jutte, Lisa S.; Hawkins, Jeremy; Miller, Kevin C.; Long, Blaine C.; Knight, Kenneth L.

2012-01-01

Context: Researchers have observed slower cooling rates in thigh muscle with greater overlying adipose tissue, suggesting that cryotherapy duration should be based on the adipose thickness of the treatment site. Skinfold data do not exist for other common cryotherapy sites, and no one has reported how those skinfolds might vary because of physical activity level or sex. Objective: To determine the variability in skinfold thickness among common cryotherapy sites relative to sex and activity level (National Collegiate Athletic Association Division I athletes, recreationally active college athletes). Design: Descriptive laboratory study. Setting: Field. Patients or Other Participants: Three hundred eighty-nine college students participated; 196 Division I athletes (157 men, 39 women) were recruited during preseason physicals, and 193 recreationally active college athletes (108 men, 85 women) were recruited from physical education classes. Intervention(s): Three skinfold measurements to within 1 mm were taken at 8 sites (inferior angle of the scapula, middle deltoid, ulnar groove, midforearm, midthigh, medial collateral ligament, midcalf, and anterior talofibular ligament [ATF]) using Lange skinfold calipers. Main Outcome Measure(s): Skinfold thickness in millimeters. Results: We noted interactions among sex, activity level, and skinfold site. Male athletes had smaller skinfold measurements than female athletes at all sites except the ATF, scapula, and ulnar groove (F7,2702 = 69.85, P < .001). Skinfold measurements were greater for recreationally active athletes than their Division I counterparts at all sites except the ATF, deltoid, and ulnar groove (F7,2702 = 30.79, P < .001). Thigh skinfold measurements of recreationally active female athletes were the largest, and their ATF skinfolds were the smallest. Conclusions: Skinfold thickness at common cryotherapy treatment sites varied based on level of physical activity and sex. Therefore, clinicians should measure skinfold thickness to determine an appropriate cryotherapy duration. PMID:22488282

Job Stress of School-Based Speech-Language Pathologists

ERIC Educational Resources Information Center

Harris, Stephanie Ferney; Prater, Mary Anne; Dyches, Tina Taylor; Heath, Melissa Allen

2009-01-01

Stress and burnout contribute significantly to the shortages of school-based speech-language pathologists (SLPs). At the request of the Utah State Office of Education, the researchers measured the stress levels of 97 school-based SLPs using the "Speech-Language Pathologist Stress Inventory." Results indicated that participants' emotional-fatigue…

Method of encouraging attention by correlating video game difficulty with attention level

NASA Technical Reports Server (NTRS)

Pope, Alan T. (Inventor); Bogart, Edward H. (Inventor)

1994-01-01

A method of encouraging attention in persons such as those suffering from Attention Deficit Disorder is provided by correlating the level of difficulty of a video game with the level of attention in a subject. A conventional video game comprises a video display which depicts objects for interaction with a player and a difficulty adjuster which increases the difficulty level, e.g., action speed and/or evasiveness of the depicted object, in a predetermined manner. The electrical activity of the brain is measured at selected sites to determine levels of awareness, e.g., activity in the beta, theta, and alpha states. A value is generated based on this measured electrical signal which is indicative of the level of awareness. The difficulty level of the game is increased as the awareness level value decreases and is decreased as this awareness level value increases.

Development and validation of a questionnaire to measure research involvement among registered dietitians.

PubMed

Whelan, Kevin; Copeland, Emma; Oladitan, Leah; Murrells, Trevor; Gandy, Joan

2013-04-01

Research involvement among registered dietitians (RDs) is important in advancing dietetics practice and ensuring high-quality and cost-effective health care. There are no standardized approaches to measuring levels of research involvement. The aim of the study was to develop a standardized measure of research involvement and test its validity and reliability among RDs. The Research Involvement Questionnaire (RIQ) was developed and underwent content validation, resulting in a content validity index of 0.92. A postal questionnaire survey of RDs was undertaken at two time points. RDs were purposively selected and, based on their number of publications and grants, were assigned by the authors to one of four levels of research involvement: evidence-based practice, collaborating on research, leading research, and leadership in research. Of 192 questionnaires mailed, 111 RDs (58%) returned the first RIQ, of whom 82 (74%) also returned the second RIQ. Total scores and scores for each level were higher for RDs with higher levels of research involvement (P<0.001). RDs assigned by the RIQ to higher levels of research involvement had higher qualifications; were qualified for longer; and had greater evidence of research output, including journal publications and grants (P<0.001). There was excellent internal consistency as measured using Cronbach's coefficient (α=.98). The level of research involvement assigned by the RIQ and by the purposive selection process agreed on 76% of occasions, indicating substantial agreement beyond chance (κ=0.67; P<0.001). The level of research involvement assigned by the RIQ at two time points agreed on 86% of occasions, indicating almost perfect agreement beyond chance (κ=0.81; P<0.001). A valid and reliable questionnaire has been developed to measure research involvement among RDs, providing a useful tool for evaluating and supporting members of the profession to become more involved in research. Copyright © 2013 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

A 2D ion chamber array audit of wedged and asymmetric fields in an inhomogeneous lung phantom.

PubMed

Lye, Jessica; Kenny, John; Lehmann, Joerg; Dunn, Leon; Kron, Tomas; Alves, Andrew; Cole, Andrew; Williams, Ivan

2014-10-01

The Australian Clinical Dosimetry Service (ACDS) has implemented a new method of a nonreference condition Level II type dosimetric audit of radiotherapy services to increase measurement accuracy and patient safety within Australia. The aim of this work is to describe the methodology, tolerances, and outcomes from the new audit. The ACDS Level II audit measures the dose delivered in 2D planes using an ionization chamber based array positioned at multiple depths. Measurements are made in rectilinear homogeneous and inhomogeneous phantoms composed of slabs of solid water and lung. Computer generated computed tomography data sets of the rectilinear phantoms are supplied to the facility prior to audit for planning of a range of cases including reference fields, asymmetric fields, and wedged fields. The audit assesses 3D planning with 6 MV photons with a static (zero degree) gantry. Scoring is performed using local dose differences between the planned and measured dose within 80% of the field width. The overall audit result is determined by the maximum dose difference over all scoring points, cases, and planes. Pass (Optimal Level) is defined as maximum dose difference ≤3.3%, Pass (Action Level) is ≤5.0%, and Fail (Out of Tolerance) is >5.0%. At close of 2013, the ACDS had performed 24 Level II audits. 63% of the audits passed, 33% failed, and the remaining audit was not assessable. Of the 15 audits that passed, 3 were at Pass (Action Level). The high fail rate is largely due to a systemic issue with modeling asymmetric 60° wedges which caused a delivered overdose of 5%-8%. The ACDS has implemented a nonreference condition Level II type audit, based on ion chamber 2D array measurements in an inhomogeneous slab phantom. The powerful diagnostic ability of this audit has allowed the ACDS to rigorously test the treatment planning systems implemented in Australian radiotherapy facilities. Recommendations from audits have led to facilities modifying clinical practice and changing planning protocols.

Measuring electromagnetic fields (EMF) around wind turbines in Canada: is there a human health concern?

PubMed Central

2014-01-01

Background The past five years has seen considerable expansion of wind power generation in Ontario, Canada. Most recently worries about exposure to electromagnetic fields (EMF) from wind turbines, and associated electrical transmission, has been raised at public meetings and legal proceedings. These fears have not been based on any actual measurements of EMF exposure surrounding existing projects but appear to follow from worries from internet sources and misunderstanding of the science. Methods The study was carried out at the Kingsbridge 1 Wind Farm located near Goderich, Ontario, Canada. Magnetic field measurements were collected in the proximity of 15 Vestas 1.8 MW wind turbines, two substations, various buried and overhead collector and transmission lines, and nearby homes. Data were collected during three operational scenarios to characterize potential EMF exposure: ‘high wind’ (generating power), ‘low wind’ (drawing power from the grid, but not generating power) and ‘shut off’ (neither drawing, nor generating power). Results Background levels of EMF (0.2 to 0.3 mG) were established by measuring magnetic fields around the wind turbines under the ‘shut off’ scenario. Magnetic field levels detected at the base of the turbines under both the ‘high wind’ and ‘low wind’ conditions were low (mean = 0.9 mG; n = 11) and rapidly diminished with distance, becoming indistinguishable from background within 2 m of the base. Magnetic fields measured 1 m above buried collector lines were also within background (≤ 0.3 mG). Beneath overhead 27.5 kV and 500 kV transmission lines, magnetic field levels of up to 16.5 and 46 mG, respectively, were recorded. These levels also diminished rapidly with distance. None of these sources appeared to influence magnetic field levels at nearby homes located as close as just over 500 m from turbines, where measurements immediately outside of the homes were ≤ 0.4 mG. Conclusions The results suggest that there is nothing unique to wind farms with respect to EMF exposure; in fact, magnetic field levels in the vicinity of wind turbines were lower than those produced by many common household electrical devices and were well below any existing regulatory guidelines with respect to human health. PMID:24529028

DBH Prediction Using Allometry Described by Bivariate Copula Distribution

NASA Astrophysics Data System (ADS)

Xu, Q.; Hou, Z.; Li, B.; Greenberg, J. A.

2017-12-01

Forest biomass mapping based on single tree detection from the airborne laser scanning (ALS) usually depends on an allometric equation that relates diameter at breast height (DBH) with per-tree aboveground biomass. The incapability of the ALS technology in directly measuring DBH leads to the need to predict DBH with other ALS-measured tree-level structural parameters. A copula-based method is proposed in the study to predict DBH with the ALS-measured tree height and crown diameter using a dataset measured in the Lassen National Forest in California. Instead of exploring an explicit mathematical equation that explains the underlying relationship between DBH and other structural parameters, the copula-based prediction method utilizes the dependency between cumulative distributions of these variables, and solves the DBH based on an assumption that for a single tree, the cumulative probability of each structural parameter is identical. Results show that compared with the bench-marking least-square linear regression and the k-MSN imputation, the copula-based method obtains better accuracy in the DBH for the Lassen National Forest. To assess the generalization of the proposed method, prediction uncertainty is quantified using bootstrapping techniques that examine the variability of the RMSE of the predicted DBH. We find that the copula distribution is reliable in describing the allometric relationship between tree-level structural parameters, and it contributes to the reduction of prediction uncertainty.

Limitations and challenges of EIT-based monitoring of stroke volume and pulmonary artery pressure.

PubMed

Braun, Fabian; Proença, Martin; Lemay, Mathieu; Bertschi, Mattia; Adler, Andy; Thiran, Jean-Philippe; Solà, Josep

2018-01-30

Electrical impedance tomography (EIT) shows potential for radiation-free and noninvasive hemodynamic monitoring. However, many factors degrade the accuracy and repeatability of these measurements. Our goal is to estimate the impact of this variability on the EIT-based monitoring of two important central hemodynamic parameters: stroke volume (SV) and pulmonary artery pressure (PAP). We performed simulations on a 4D ([Formula: see text]) bioimpedance model of a human volunteer to study the influence of four potential confounding factors (electrode belt displacement, electrode detachment, changes in hematocrit and lung air volume) on the performance of EIT-based SV and PAP estimation. Results were used to estimate how these factors affect the EIT measures of either absolute values or relative changes (i.e. trending). Our findings reveal that the absolute measurement of SV via EIT is very sensitive to electrode belt displacements and lung conductivity changes. Nonetheless, the trending ability of SV EIT might be a promising alternative. The timing-based measurement of PAP is more robust to lung conductivity changes but sensitive to longitudinal belt displacements at severe hypertensive levels and to rotational displacements (independent of the PAP level). We identify and quantify the challenges of EIT-based SV and PAP monitoring. Absolute SV via EIT is challenging, but trending is feasible, while both the absolute and trending of PAP via EIT are mostly impaired by belt displacements.

Establishment of National Gravity Base Network of Iran

NASA Astrophysics Data System (ADS)

Hatam Chavari, Y.; Bayer, R.; Hinderer, J.; Ghazavi, K.; Sedighi, M.; Luck, B.; Djamour, Y.; Le Moign, N.; Saadat, R.; Cheraghi, H.

2009-04-01

A gravity base network is supposed to be a set of benchmarks uniformly distributed across the country and the absolute gravity values at the benchmarks are known to the best accessible accuracy. The gravity at the benchmark stations are either measured directly with absolute devices or transferred by gravity difference measurements by gravimeters from known stations. To decrease the accumulation of random measuring errors arising from these transfers, the number of base stations distributed across the country should be as small as possible. This is feasible if the stations are selected near to the national airports long distances apart but faster accessible and measurable by a gravimeter carried in an airplane between the stations. To realize the importance of such a network, various applications of a gravity base network are firstly reviewed. A gravity base network is the required reference frame for establishing 1st , 2nd and 3rd order gravity networks. Such a gravity network is used for the following purposes: a. Mapping of the structure of upper crust in geology maps. The required accuracy for the measured gravity values is about 0.2 to 0.4 mGal. b. Oil and mineral explorations. The required accuracy for the measured gravity values is about 5 µGal. c. Geotechnical studies in mining areas for exploring the underground cavities as well as archeological studies. The required accuracy is about 5 µGal and better. d. Subsurface water resource explorations and mapping crustal layers which absorb it. An accuracy of the same level of previous applications is required here too. e. Studying the tectonics of the Earth's crust. Repeated precise gravity measurements at the gravity network stations can assist us in identifying systematic height changes. The accuracy of the order of 5 µGal and more is required. f. Studying volcanoes and their evolution. Repeated precise gravity measurements at the gravity network stations can provide valuable information on the gradual upward movement of lava. g. Producing precise mean gravity anomaly for precise geoid determination. Replacing precise spirit leveling by the GPS leveling using precise geoid model is one of the forth coming application of the precise geoid. A gravity base network of 28 stations established over Iran. The stations were built mainly at bedrocks. All stations were measured by an FG5 absolute gravimeter, at least 12 hours at each station, to obtain an accuracy of a few micro gals. Several stations were repeated several times during recent years to estimate the gravity changes.

The Decline of Comprehension-Based Silent Reading Efficiency in the United States: A Comparison of Current Data with Performance in 1960

ERIC Educational Resources Information Center

Spichtig, Alexandra N.; Hiebert, Elfrieda H.; Vorstius, Christian; Pascoe, Jeffrey P.; Pearson, P. David; Radach, Ralph

2016-01-01

The present study measured the comprehension-based silent reading efficiency of U.S. students in grades 2, 4, 6, 8, 10, and 12. Students read standardized grade-level passages while an eye movement recording system was used to measure reading rate, fixations (eye stops) per word, fixation durations, and regressions (right-to-left eye movements)…

Modifying Achievement Test Items: A Theory-Guided and Data-Based Approach for Better Measurement of What Students with Disabilities Know

ERIC Educational Resources Information Center

Kettler, Ryan J.; Elliott, Stephen N.; Beddow, Peter A.

2009-01-01

Federal regulations allow up to 2% of the student population of a state to achieve proficiency for adequate yearly progress by taking an alternate assessment based on modified academic achievement standards (AA-MAS). Such tests are likely to be easier, but as long as a test is considered a valid measure of grade level content, it is allowable as…

Mesoscale hybrid calibration artifact

DOEpatents

Tran, Hy D.; Claudet, Andre A.; Oliver, Andrew D.

2010-09-07

A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

Application of Aquaculture Monitoring System Based on CC2530

NASA Astrophysics Data System (ADS)

Chen, H. L.; Liu, X. Q.

In order to improve the intelligent level of aquaculture technology, this paper puts forward a remote wireless monitoring system based on ZigBee technology, GPRS technology and Android mobile phone platform. The system is composed of wireless sensor network (WSN), GPRS module, PC server, and Android client. The WSN was set up by CC2530 chips based on ZigBee protocol, to realize the collection of water quality parameters such as the water level, temperature, PH and dissolved oxygen. The GPRS module realizes remote communication between WSN and PC server. Android client communicates with server to monitor the level of water quality. The PID (proportion, integration, differentiation) control is adopted in the control part, the control commands from the android mobile phone is sent to the server, the server again send it to the lower machine to control the water level regulating valve and increasing oxygen pump. After practical testing to the system in Liyang, Jiangsu province, China, temperature measurement accuracy reaches 0.5°C, PH measurement accuracy reaches 0.3, water level control precision can be controlled within ± 3cm, dissolved oxygen control precision can be controlled within ±0.3 mg/L, all the indexes can meet the requirements, this system is very suitable for aquaculture.

Improving anti-bullying laws and policies to protect youth from weight-based victimization: parental support for action.

PubMed

Puhl, R M; Suh, Y; Li, X

2017-04-01

Weight-based bullying is a prevalent problem among youth with overweight and obesity, but remains neglected in existing policy-level strategies to address youth bullying. Parental support is an influential catalyst motivating political will for policy decisions affecting youth, but has received limited research attention. To assess levels of, and predictors of, parental support for school-based policies and state/federal legal measures to address weight-based bullying in 2014 and 2015. Identical online questionnaires were completed by two independent national samples of parents in 2014 and 2015 (N = 1804). Parental support for all policy actions was high (at least 81%) and significantly increased from 2014 to 2015 for legal measures that would a) require state anti-bullying laws to add protections against weight-based bullying, and b) enact a federal anti-bullying law that includes weight-based bullying. These findings can inform policy discourse about remedies for youth bullying, and suggest that parental support for improved legal protections against weight-based bullying is present, consistent, and strong. © 2016 World Obesity Federation.

In-flight source noise of an advanced full-scale single-rotation propeller

NASA Technical Reports Server (NTRS)

Woodward, Richard P.; Loffler, Irvin J.

1991-01-01

Flight tests to define the far-field tone source at cruise conditions have been completed on the full-scale SR-7L advanced turboprop, which was installed on the left wing of a Gulfstream II aircraft. These measurements defined source levels for input into long-distance propagation models to predict en route noise. Infight data were taken for seven test cases. The sideline directivities measured showed expected maximum levels near 105 deg from the propeller upstream axis. However, azimuthal directivities based on the maximum observed sideline tone levels showed highest levels below the aircraft. The tone level reduction associated with reductions in propeller tip speed is shown to be more significant in the horizontal plane than below the aircraft.

The Development of Model for Measuring Railway Wheels Manufacturing Readiness Level

NASA Astrophysics Data System (ADS)

Inrawan Wiratmadja, Iwan; Mufid, Anas

2016-02-01

In an effort to grow the railway wheel industry in Indonesia and reduce the dependence on imports, Metal Industries Development Center (MIDC) makes the implementation of the railway wheel manufacturing technology in Indonesia. MIDC is an institution based on research and development having a task to research the production of railway wheels prototype and acts as a supervisor to the industry in Indonesia, for implementing the railway wheel manufacturing technology. The process of implementing manufacturing technology requires a lot of resources. Therefore it is necessary to measure the manufacturing readiness process. Measurement of railway wheels manufacturing readiness was in this study done using the manufacturing readiness level (MRL) model from the United States Department of Defense. MRL consists of 10 manufacturing readiness levels described by 90 criteria and 184 sub-criteria. To get a manufacturing readiness measurement instrument that is good and accurate, the development process involved experts through expert judgment method and validated with a content validity ratio (CVR). Measurement instrument developed in this study consist of 448 indicators. The measurement results show that MIDC's railway wheels manufacturing readiness is at the level 4. This shows that there is a gap between the current level of manufacturing readiness owned by MIDC and manufacturing readiness levels required to achieve the program objectives, which is level 5. To achieve the program objectives at level 5, a number of actions were required to be done by MIDC. Indicators that must be improved to be able to achieve level 5 are indicators related to the cost and financing, process capability and control, quality management, workers, and manufacturing management criteria.

Efficiency and Productivity of County-level Public Hospitals Based on the Data Envelopment Analysis Model and Malmquist Index in Anhui, China

PubMed Central

Li, Nian-Nian; Wang, Cun-Hui; Ni, Hong; Wang, Heng

2017-01-01

Background: China began to implement the national medical and health system and public hospital reforms in 2009 and 2012, respectively. Anhui Province is one of the four pilot provinces, and the medical reform measures received wide attention nationwide. The effectiveness of the above reform needs to get attention. This study aimed to master the efficiency and productivity of county-level public hospitals based on the data envelopment analysis (DEA) model and Malmquist index in Anhui, China, and then provide improvement measures for the future hospital development. Methods: We chose 12 country-level hospitals based on geographical distribution and the economic development level in Anhui Province. Relevant data that were collected in the field and then sorted were provided by the administrative departments of the hospitals. DEA models were used to calculate the dynamic efficiency and Malmquist index factors for the 12 institutions. Results: During 2010–2015, the overall average relative service efficiency of 12 county-level public hospitals was 0.926, and the number of hospitals achieved an effective DEA for each year from 2010 to 2015 was 4, 6, 7, 7, 6, and 8, respectively, as measured using DEA. During this same period, the average overall production efficiency was 0.983, and the total productivity factor had declined. The overall production efficiency of five hospitals was >1, and the rest are <1 between 2010 and 2015. Conclusions: In 2010–2015, the relative service efficiency of 12 county-level public hospitals in Anhui Province showed a decreasing trend, and the service efficiency of each hospital changed. In the past 6 years, although some hospitals have been effective, the efficiency of the county-level public hospitals in Anhui Province has not improved significantly, and the total factor productivity has not been effectively improved. County-level public hospitals need to combine their own reality to find their own deficiencies. PMID:29176142

Efficiency and Productivity of County-level Public Hospitals Based on the Data Envelopment Analysis Model and Malmquist Index in Anhui, China.

PubMed

Li, Nian-Nian; Wang, Cun-Hui; Ni, Hong; Wang, Heng

2017-12-05

China began to implement the national medical and health system and public hospital reforms in 2009 and 2012, respectively. Anhui Province is one of the four pilot provinces, and the medical reform measures received wide attention nationwide. The effectiveness of the above reform needs to get attention. This study aimed to master the efficiency and productivity of county-level public hospitals based on the data envelopment analysis (DEA) model and Malmquist index in Anhui, China, and then provide improvement measures for the future hospital development. We chose 12 country-level hospitals based on geographical distribution and the economic development level in Anhui Province. Relevant data that were collected in the field and then sorted were provided by the administrative departments of the hospitals. DEA models were used to calculate the dynamic efficiency and Malmquist index factors for the 12 institutions. During 2010-2015, the overall average relative service efficiency of 12 county-level public hospitals was 0.926, and the number of hospitals achieved an effective DEA for each year from 2010 to 2015 was 4, 6, 7, 7, 6, and 8, respectively, as measured using DEA. During this same period, the average overall production efficiency was 0.983, and the total productivity factor had declined. The overall production efficiency of five hospitals was >1, and the rest are <1 between 2010 and 2015. In 2010-2015, the relative service efficiency of 12 county-level public hospitals in Anhui Province showed a decreasing trend, and the service efficiency of each hospital changed. In the past 6 years, although some hospitals have been effective, the efficiency of the county-level public hospitals in Anhui Province has not improved significantly, and the total factor productivity has not been effectively improved. County-level public hospitals need to combine their own reality to find their own deficiencies.

Simulation of ground-water flow in glaciofluvial aquifers in the Grand Rapids area, Minnesota

USGS Publications Warehouse

Jones, Perry M.

2004-01-01

A calibrated steady-state, finite-difference, ground-waterflow model was constructed to simulate ground-water flow in three glaciofluvial aquifers, defined in this report as the upper, middle, and lower aquifers, in an area of about 114 mi2 surrounding the city of Grand Rapids in north-central Minnesota. The calibrated model will be used by Minnesota Department of Health and communities in the Grand Rapids area in the development of wellhead protection plans for their water supplies. The model was calibrated through comparison of simulated ground-water levels to measured static water levels in 351 wells, and comparison of simulated base-flow rates to estimated base-flow rates for reaches of the Mississippi and Prairie Rivers. Model statistics indicate that the model tends to overestimate ground-water levels. The root mean square errors ranged from +12.83 ft in wells completed in the upper aquifer to +19.10 ft in wells completed in the middle aquifer. Mean absolute differences between simulated and measured water levels ranged from +4.43 ft for wells completed in the upper aquifer to +9.25 ft for wells completed in the middle aquifer. Mean algebraic differences ranged from +9.35 ft for wells completed in the upper aquifer to +14.44 ft for wells completed in the middle aquifer, with the positive differences indicating that the simulated water levels were higher than the measured water levels. Percentage errors between simulated and estimated base-flow rates for the three monitored reaches all were less than 10 percent, indicating good agreement. Simulated ground-water levels were most sensitive to changes in general-head boundary conductance, indicating that this characteristic is the predominant model input variable controlling steady-state water-level conditions. Simulated groundwater flow to stream reaches was most sensitive to changes in horizontal hydraulic conductivity, indicating that this characteristic is the predominant model input variable controlling steady-state flow conditions.

SU-F-J-193: Efficient Dose Extinction Method for Water Equivalent Path Length (WEPL) of Real Tissue Samples for Validation of CT HU to Stopping Power Conversion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, R; Baer, E; Jee, K

Purpose: For proton therapy, an accurate model of CT HU to relative stopping power (RSP) conversion is essential. In current practice, validation of these models relies solely on measurements of tissue substitutes with standard compositions. Validation based on real tissue samples would be much more direct and can address variations between patients. This study intends to develop an efficient and accurate system based on the concept of dose extinction to measure WEPL and retrieve RSP in biological tissue in large number of types. Methods: A broad AP proton beam delivering a spread out Bragg peak (SOBP) is used to irradiatemore » the samples with a Matrixx detector positioned immediately below. A water tank was placed on top of the samples, with the water level controllable in sub-millimeter by a remotely controlled dosing pump. While gradually lowering the water level with beam on, the transmission dose was recorded at 1 frame/sec. The WEPL were determined as the difference between the known beam range of the delivered SOBP (80%) and the water level corresponding to 80% of measured dose profiles in time. A Gammex 467 phantom was used to test the system and various types of biological tissue was measured. Results: RSP for all Gammex inserts, expect the one made with lung-450 material (<2% error), were determined within ±0.5% error. Depends on the WEPL of investigated phantom, a measurement takes around 10 min, which can be accelerated by a faster pump. Conclusion: Based on the concept of dose extinction, a system was explored to measure WEPL efficiently and accurately for a large number of samples. This allows the validation of CT HU to stopping power conversions based on large number of samples and real tissues. It also allows the assessment of beam uncertainties due to variations over patients, which issue has never been sufficiently studied before.« less

Ground-Based Network and Supersite Observations to Complement and Enrich EOS Research

NASA Technical Reports Server (NTRS)

Tsay, Si-Chee; Holben, Brent N.; Welton, Ellsworth J.

2011-01-01

Since 1997 NASA has been successfully launching a series of satellites - the Earth Observing System (EOS) - to intensively study, and gain a better understanding of, the Earth as an integrated system. Space-borne remote sensing observations, however, are often plagued by contamination of surface signatures. Thus, ground-based in-situ and remote-sensing measurements, where signals come directly from atmospheric constituents, the sun, and/or the Earth-atmosphere interactions, provide additional information content for comparisons that confirm quantitatively the usefulness of the integrated surface, aircraft, and satellite datasets. Through numerous participations, particularly but not limited to the EOS remote-sensing/retrieval and validation projects over the years, NASA/GSFC has developed and continuously refined ground-based networks and mobile observatories that proved to be vital in providing high temporal measurements, which complement and enrich the satellite observations. These are: the AERO NET (AErosol RObotic NETwork) a federation of ground-based globally distributed network of spectral sun-sky photometers; the MPLNET (Micro-Pulse Lidar NETwork, a similarly organized network of micro-pulse lidar systems measuring aerosol and cloud vertical structure continuously; and the SMART-COMMIT (Surface-sensing Measurements for Atmospheric Radiative Transfer - Chemical, Optical & Microphysical Measurements of In-situ Troposphere, mobile observatories, a suite of spectral radiometers and in-situ probes acquiring supersite measurements. Most MPLNET sites are collocated with those of AERONET, and both networks always support the deployment of SMART-COMMIT worldwide. These data products follow the data structure of EOS conventions: Level-0, instrument archived raw data; Level-1 (or 1.5), real-time data with no (or limited) quality assurance; Level-2, not real high temporal and spectral resolutions. In this talk, we will present NASA/GSFC groundbased facilities, serving as network or supersite observations, which have been playing key roles in major international research projects over diverse aerosol regimes to complement and enrich the EOS scientific research.

Temporal Synchronization Analysis for Improving Regression Modeling of Fecal Indicator Bacteria Levels

EPA Science Inventory

Multiple linear regression models are often used to predict levels of fecal indicator bacteria (FIB) in recreational swimming waters based on independent variables (IVs) such as meteorologic, hydrodynamic, and water-quality measures. The IVs used for these analyses are traditiona...

Indoor radon regulation using tabulated values of temporal radon variation.

PubMed

Tsapalov, Andrey; Kovler, Konstantin

2018-03-01

Mass measurements of indoor radon concentrations have been conducted for about 30 years. In most of the countries, a national reference/action/limit level is adopted, limiting the annual average indoor radon (AAIR) concentration. However, until now, there is no single and generally accepted international protocol for determining the AAIR with a known confidence interval, based on measurements of different durations. Obviously, as the duration of measurements increases, the uncertainty of the AAIR estimation decreases. The lack of the information about the confidence interval of the determined AAIR level does not allow correct comparison with the radon reference level. This greatly complicates development of an effective indoor radon measurement protocol and strategy. The paper proposes a general principle of indoor radon regulation, based on the simple criteria widely used in metrology, and introduces a new parameter - coefficient of temporal radon variation K V (t) that depends on the measurement duration and determines the uncertainty of the AAIR. An algorithm for determining K V (t) based on the results of annual continuous radon monitoring in experimental rooms is proposed. Included are indoor radon activity concentrations and equilibrium equivalent concentration (EEC) of radon progeny. The monitoring was conducted in 10 selected experimental rooms located in 7 buildings, mainly in the Moscow region (Russia), from 2006 to 2013. The experimental and tabulated values of K V (t) and also the values of the coefficient of temporal EEC variation depending on the mode and duration of the measurements were obtained. The recommendations to improve the efficiency and reliability of indoor radon regulation are given. The importance of taking into account the geological factors is discussed. The representativity of the results of the study is estimated and the approach for their verification is proposed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Feasibility of the music therapy assessment tool for awareness in disorders of consciousness (MATADOC) for use with pediatric populations.

PubMed

Magee, Wendy L; Ghetti, Claire M; Moyer, Alvin

2015-01-01

Measuring responsiveness to gain accurate diagnosis in populations with disorders of consciousness (DOC) is of central concern because these patients have such complex clinical presentations. Due to the uncertainty of accuracy for both behavioral and neurophysiological measures in DOC, combined assessment approaches are recommended. A number of standardized behavioral measures can be used with adults with DOC with minor to moderate reservations relating to the measures' psychometric properties and clinical applicability. However, no measures have been standardized for use with pediatric DOC populations. When adapting adult measures for children, confounding factors include developmental considerations for language-based items included in all DOC measures. Given the lack of pediatric DOC measures, there is a pressing need for measures that are sensitive to the complex clinical presentations typical of DOC and that can accommodate the developmental levels of pediatric populations. The music therapy assessment tool for awareness in disorders of consciousness (MATADOC) is a music-based measure that has been standardized for adults with DOC. Given its emphasis on non-language based sensory stimuli, it is well-suited to pediatric populations spanning developmental stages. In a pre-pilot exploratory study, we examined the clinical utility of this measure and explored trends for test-retest and inter-rater agreement as well as its performance against external reference standards. In several cases, MATADOC items in the visual and auditory domains produced outcomes suggestive of higher level functioning when compared to outcomes provided by other DOC measures. Preliminary findings suggest that the MATADOC provides a useful protocol and measure for behavioral assessment and clinical treatment planning with pediatric DOC. Further research with a larger sample is warranted to test a version of the MATADOC that is refined to meet developmental needs of pediatric DOC populations.

Aerodynamic Performance of a Compact, High Work-Factor Centrifugal Compressor at the Stage and Subcomponent Level

NASA Technical Reports Server (NTRS)

Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.

2015-01-01

The measured aerodynamic performance of a compact, high work-factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90deg-bend, and exit guide vane is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level is reported for operation between 70 to 105 percent of design corrected speed, with subcomponent (impeller, diffuser, and exit-guide-vane) flow field measurements presented and discussed at the 100 percent design-speed condition. Individual component losses from measurements are compared with pre-test CFD predictions on a limited basis.

Aerodynamic Performance of a Compact, High Work-Factor Centrifugal Compressor at the Stage and Subcomponent Level

NASA Technical Reports Server (NTRS)

Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.

2014-01-01

The measured aerodynamic performance of a compact, high work-factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90º-bend, and exit guide vane is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level is reported for operation between 70 to 105% of design corrected speed, with subcomponent (impeller, diffuser, and exit-guide-vane) flow field measurements presented and discussed at the 100% design-speed condition. Individual component losses from measurements are compared with pre-test CFD predictions on a limited basis.

Impacts of different types of measurements on estimating unsaturated flow parameters

NASA Astrophysics Data System (ADS)

Shi, Liangsheng; Song, Xuehang; Tong, Juxiu; Zhu, Yan; Zhang, Qiuru

2015-05-01

This paper assesses the value of different types of measurements for estimating soil hydraulic parameters. A numerical method based on ensemble Kalman filter (EnKF) is presented to solely or jointly assimilate point-scale soil water head data, point-scale soil water content data, surface soil water content data and groundwater level data. This study investigates the performance of EnKF under different types of data, the potential worth contained in these data, and the factors that may affect estimation accuracy. Results show that for all types of data, smaller measurements errors lead to faster convergence to the true values. Higher accuracy measurements are required to improve the parameter estimation if a large number of unknown parameters need to be identified simultaneously. The data worth implied by the surface soil water content data and groundwater level data is prone to corruption by a deviated initial guess. Surface soil moisture data are capable of identifying soil hydraulic parameters for the top layers, but exert less or no influence on deeper layers especially when estimating multiple parameters simultaneously. Groundwater level is one type of valuable information to infer the soil hydraulic parameters. However, based on the approach used in this study, the estimates from groundwater level data may suffer severe degradation if a large number of parameters must be identified. Combined use of two or more types of data is helpful to improve the parameter estimation.

Impacts of Different Types of Measurements on Estimating Unsaturatedflow Parameters

NASA Astrophysics Data System (ADS)

Shi, L.

2015-12-01

This study evaluates the value of different types of measurements for estimating soil hydraulic parameters. A numerical method based on ensemble Kalman filter (EnKF) is presented to solely or jointly assimilate point-scale soil water head data, point-scale soil water content data, surface soil water content data and groundwater level data. This study investigates the performance of EnKF under different types of data, the potential worth contained in these data, and the factors that may affect estimation accuracy. Results show that for all types of data, smaller measurements errors lead to faster convergence to the true values. Higher accuracy measurements are required to improve the parameter estimation if a large number of unknown parameters need to be identified simultaneously. The data worth implied by the surface soil water content data and groundwater level data is prone to corruption by a deviated initial guess. Surface soil moisture data are capable of identifying soil hydraulic parameters for the top layers, but exert less or no influence on deeper layers especially when estimating multiple parameters simultaneously. Groundwater level is one type of valuable information to infer the soil hydraulic parameters. However, based on the approach used in this study, the estimates from groundwater level data may suffer severe degradation if a large number of parameters must be identified. Combined use of two or more types of data is helpful to improve the parameter estimation.

Validation of oxygen extraction fraction measurement by qBOLD technique.

PubMed

He, Xiang; Zhu, Mingming; Yablonskiy, Dmitriy A

2008-10-01

Measurement of brain tissue oxygen extraction fraction (OEF) in both baseline and functionally activated states can provide important information on brain functioning in health and disease. The recently proposed quantitative BOLD (qBOLD) technique is MRI-based and provides a regional in vivo OEF measurement (He and Yablonskiy, MRM 2007, 57:115-126). It is based on a previously developed analytical BOLD model and incorporates prior knowledge about the brain tissue composition including the contributions from grey matter, white matter, cerebrospinal fluid, interstitial fluid and intravascular blood. The qBOLD model also allows for the separation of contributions to the BOLD signal from OEF and the deoxyhemoglobin containing blood volume (DBV). The objective of this study is to validate OEF measurements provided by the qBOLD approach. To this end we use a rat model and compare qBOLD OEF measurements against direct measurements of the blood oxygenation level obtained from venous blood drawn directly from the superior sagittal sinus. The cerebral venous oxygenation level of the rat was manipulated by utilizing different anestheisa methods. The study demonstrates a very good agreement between qBOLD approach and direct measurements. (c) 2008 Wiley-Liss, Inc.

Measuring the Differences between Traditional Learning and Game-Based Learning Using Electroencephalography (EEG) Physiologically Based Methodology

ERIC Educational Resources Information Center

Chen, Ching-Huei

2017-01-01

Students' cognitive states can reflect a learning experience that results in engagement in an activity. In this study, we used electroencephalography (EEG) physiologically based methodology to evaluate students' levels of attention and relaxation, as well as their learning performance within a traditional and game-based learning context. While no…

Comparative international analysis of radiofrequency exposure surveys of mobile communication radio base stations

PubMed Central

Rowley, Jack T; Joyner, Ken H

2012-01-01

This paper presents analyses of data from surveys of radio base stations in 23 countries across five continents from the year 2000 onward and includes over 173,000 individual data points. The research compared the results of the national surveys, investigated chronological trends and compared exposures by technology. The key findings from this data are that irrespective of country, the year and cellular technology, exposures to radio signals at ground level were only a small fraction of the relevant human exposure standards. Importantly, there has been no significant increase in exposure levels since the widespread introduction of 3G mobile services, which should be reassuring for policy makers and negate the need for post-installation measurements at ground level for compliance purposes. There may be areas close to antennas where compliance levels could be exceeded. Future potential work includes extending the study to additional countries, development of cumulative exposure distributions and investigating the possibility of linking exposure measurements to population statistics to assess the distribution of exposure levels relative to population percentiles. PMID:22377680

Comparative international analysis of radiofrequency exposure surveys of mobile communication radio base stations.

PubMed

Rowley, Jack T; Joyner, Ken H

2012-01-01

This paper presents analyses of data from surveys of radio base stations in 23 countries across five continents from the year 2000 onward and includes over 173,000 individual data points. The research compared the results of the national surveys, investigated chronological trends and compared exposures by technology. The key findings from this data are that irrespective of country, the year and cellular technology, exposures to radio signals at ground level were only a small fraction of the relevant human exposure standards. Importantly, there has been no significant increase in exposure levels since the widespread introduction of 3G mobile services, which should be reassuring for policy makers and negate the need for post-installation measurements at ground level for compliance purposes. There may be areas close to antennas where compliance levels could be exceeded. Future potential work includes extending the study to additional countries, development of cumulative exposure distributions and investigating the possibility of linking exposure measurements to population statistics to assess the distribution of exposure levels relative to population percentiles.

Experimental Study of Ballistic-Missile Base Heating with Operating Rocket

NASA Technical Reports Server (NTRS)

Nettle, J. Cary

1958-01-01

A rocket of the 1000-pound-thrust class using liquid oxygen and JP-4 fuel as propellant was installed in the Lewis 8- by 6-foot tunnel to permit a controlled study of some of the factors affecting the heating of a rocket-missile base. Temperatures measured in the base region are presented from findings of three motor extension lengths relative to the base. Data are also presented for two combustion efficiency levels in the rocket motor. Temperature as high as 1200 F was measured in the base region because of the ignition of burnable rocket gases. combustibles that are dumped into the base by accessories seriously aggravate the base-burning temperature rise.

Using Concurrent Verbalization to Measure Math Comprehension

ERIC Educational Resources Information Center

Lambeth, Cathryn Colley

2012-01-01

The current study investigated variability in student performance on a concurrent verbalization measure based on a grade-level sample math word problem and sought to determine to what extent the variability in verbalization scores is related to scores on a reliable measure of reading (DIBELS Next) and math (easyCBM) and to student factors (e.g.…

Using Rasch Measurement to Validate an Instrument for Measuring the Quality of Classroom Teaching in Secondary Chemistry Lessons

ERIC Educational Resources Information Center

He, Peng; Liu, Xiufeng; Zheng, Changlong; Jia, Mengying

2016-01-01

This study intends to develop a standardized instrument for measuring classroom teaching and learning in secondary chemistry lessons. Based on previous studies and interviews with expert teachers, the progression of five quality levels was constructed hypothetically to represent the quality of chemistry lessons in Chinese secondary schools. The…

Measuring whole-plant transpiration gravimetrically: a scalable automated system built from components

Treesearch

Damian Cirelli; Victor J. Lieffers; Melvin T. Tyree

2012-01-01

Measuring whole-plant transpiration is highly relevant considering the increasing interest in understanding and improving plant water use at the whole-plant level. We present an original software package (Amalthea) and a design to create a system for measuring transpiration using laboratory balances based on the readily available commodity hardware. The system is...

49 CFR Appendix A to Part 611 - Description of Measures Used for Project Evaluation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... alternative, travelers projected to shift to transit because of the new start project, and non-transit users... measure will be based on a multi-modal measure of perceived travel times faced by all users of the..., and level of commitment of each proposed source of local match, including inter-governmental grants...

Femtosecond-level timing fluctuation suppression in atmospheric frequency transfer with passive phase conjunction correction.

PubMed

Sun, Fuyu; Hou, Dong; Zhang, Danian; Tian, Jie; Hu, Jianguo; Huang, Xianhe; Chen, Shijun

2017-09-04

We demonstrate femtosecond-level timing fluctuation suppression in indoor atmospheric comb-based frequency transfer with a passive phase conjunction correction technique. Timing fluctuations and Allan deviations are both measured to characterize the excess frequency instability incurred during the frequency transfer process. By transferring a 2 GHz microwave over a 52-m long free-space link in 5000 s, the total root-mean-square (RMS) timing fluctuation was measured to be about 280 fs with a fractional frequency instability on the order of 3 × 10 -13 at 1 s and 6 × 10 -17 at 1000 s. This atmospheric comb-based frequency transfer with passive phase conjunction correction can be used to build an atomic clock-based free-space frequency transmission link because its instability is less than that of a commercial Cs or H-master clock.

A Focusing Method in the Calibration Process of Image Sensors Based on IOFBs

PubMed Central

Fernández, Pedro R.; Lázaro, José L.; Gardel, Alfredo; Cano, Ángel E.; Bravo, Ignacio

2010-01-01

A focusing procedure in the calibration process of image sensors based on Incoherent Optical Fiber Bundles (IOFBs) is described using the information extracted from fibers. These procedures differ from any other currently known focusing method due to the non spatial in-out correspondence between fibers, which produces a natural codification of the image to transmit. Focus measuring is essential prior to carrying out calibration in order to guarantee accurate processing and decoding. Four algorithms have been developed to estimate the focus measure; two methods based on mean grey level, and the other two based on variance. In this paper, a few simple focus measures are defined and compared. Some experimental results referred to the focus measure and the accuracy of the developed methods are discussed in order to demonstrate its effectiveness. PMID:22315526

Inter-relationships between objective and subjective measures of the residential environment among urban African American women

PubMed Central

Sealy-Jefferson, Shawnita; Messer, Lynne; Slaughter-Acey, Jaime; Misra, Dawn P.

2016-01-01

Background The inter-relationships between objective (census-based) and subjective (resident reported) measures of the residential environment is understudied in African American (AA) populations. Methods Using data from the Life Influences on Fetal Environments Study (2009–2011) (n=1,387) of AA women, we quantified the area-level variation in subjective reports of residential healthy food availability, walkability, safety and disorder that can be accounted for with an objective neighborhood disadvantage index (NDI). Two-level generalized linear models estimated associations between objective and subjective measures of the residential environment, accounting for individual-level covariates. Results In unconditional models, intraclass correlation coefficients for block-group variance in subjective reports ranged from 11% (healthy food availability) to 30% (safety). Models accounting for the NDI (versus both NDI and individual level covariates) accounted for more variance in healthy food availability (23% versus 8%) and social disorder (40% versus 38%). The NDI and individual level variables accounted for 39% and 51% of the area-level variation in walkability and safety. Associations between subjective and objective measures of the residential environment were significant and in the expected direction. Conclusions Future studies on neighborhood effects on health, especially among AAs, should include a wide range of residential environment measures, including subjective, objective and spatial contextual variables. PMID:28160971

Inter-relationships between objective and subjective measures of the residential environment among urban African American women.

PubMed

Sealy-Jefferson, Shawnita; Messer, Lynne; Slaughter-Acey, Jaime; Misra, Dawn P

2017-03-01

The inter-relationships between objective (census based) and subjective (resident reported) measures of the residential environment is understudied in African American (AA) populations. Using data from the Life Influences on Fetal Environments Study (2009-2011; n = 1387) of AA women, we quantified the area-level variation in subjective reports of residential healthy food availability, walkability, safety, and disorder that can be accounted for with an objective neighborhood disadvantage index (NDI). Two-level generalized linear models estimated associations between objective and subjective measures of the residential environment, accounting for individual-level covariates. In unconditional models, intraclass correlation coefficients for block-group variance in subjective reports ranged from 11% (healthy food availability) to 30% (safety). Models accounting for the NDI (vs. both NDI and individual-level covariates) accounted for more variance in healthy food availability (23% vs. 8%) and social disorder (40% vs. 38%). The NDI and individual-level variables accounted for 39% and 51% of the area-level variation in walkability and safety, respectively. Associations between subjective and objective measures of the residential environment were significant and in the expected direction. Future studies on neighborhood effects on health, especially among AAs, should include a wide range of residential environment measures, including subjective, objective, and spatial contextual variables. Copyright © 2016 Elsevier Inc. All rights reserved.

On the use of mobile phones and wearable microphones for noise exposure measurements: Calibration and measurement accuracy

NASA Astrophysics Data System (ADS)

Dumoulin, Romain

Despite the fact that noise-induced hearing loss remains the number one occupational disease in developed countries, individual noise exposure levels are still rarely known and infrequently tracked. Indeed, efforts to standardize noise exposure levels present disadvantages such as costly instrumentation and difficulties associated with on site implementation. Given their advanced technical capabilities and widespread daily usage, mobile phones could be used to measure noise levels and make noise monitoring more accessible. However, the use of mobile phones for measuring noise exposure is currently limited due to the lack of formal procedures for their calibration and challenges regarding the measurement procedure. Our research investigated the calibration of mobile phone-based solutions for measuring noise exposure using a mobile phone's built-in microphones and wearable external microphones. The proposed calibration approach integrated corrections that took into account microphone placement error. The corrections were of two types: frequency-dependent, using a digital filter and noise level-dependent, based on the difference between the C-weighted noise level minus A-weighted noise level of the noise measured by the phone. The electro-acoustical limitations and measurement calibration procedure of the mobile phone were investigated. The study also sought to quantify the effect of noise exposure characteristics on the accuracy of calibrated mobile phone measurements. Measurements were carried out in reverberant and semi-anechoic chambers with several mobiles phone units of the same model, two types of external devices (an earpiece and a headset with an in-line microphone) and an acoustical test fixture (ATF). The proposed calibration approach significantly improved the accuracy of the noise level measurements in diffuse and free fields, with better results in the diffuse field and with ATF positions causing little or no acoustic shadowing. Several sources of errors and uncertainties were identified including the errors associated with the inter-unit-variability, the presence of signal saturation and the microphone placement relative to the source and the wearer. The results of the investigations and validation measurements led to recommendations regarding the measurement procedure including the use of external microphones having lower sensitivity and provided the basis for a standardized and unique factory default calibration method intended for implementation in any mobile phone. A user-defined adjustment was proposed to minimize the errors associated with calibration and the acoustical field. Mobile phones implementing the proposed laboratory calibration and used with external microphones showed great potential as noise exposure instruments. Combined with their potential as training and prevention tools, the expansion of their use could significantly help reduce the risks of noise-induced hearing loss.

[Valuation of health-related quality of life and utilities in health economics].

PubMed

Greiner, Wolfgang; Klose, Kristina

2014-01-01

Measuring health-related quality of life is an important aspect in economic evaluation of health programmes. The development of utility-based (preference-based) measures is advanced by the discipline of health economics. Different preference measures are applied for valuing health states to produce a weighted health state index. Those preference weights should be derived from a general population sample in case of resource allocation on a collective level (as in current valuation studies of the EuroQol group). Copyright © 2014. Published by Elsevier GmbH.

Groundwater levels for selected wells in Upper Kittitas County, Washington

USGS Publications Warehouse

Fasser, E.T.; Julich, R.J.

2011-01-01

Groundwater levels for selected wells in Upper Kittitas County, Washington, are presented on an interactive, web-based map to document the spatial distribution of groundwater levels in the study area measured during spring 2011. Groundwater-level data and well information were collected by the U.S. Geological Survey using standard techniques and are stored in the U.S. Geological Survey National Water Information System, Groundwater Site-Inventory database.

Sound pressure level in a municipal preschool

PubMed Central

Kemp, Adriana Aparecida Tahara; Delecrode, Camila Ribas; Guida, Heraldo Lorena; Ribeiro, André Knap; Cardoso, Ana Claúdia Vieira

2013-01-01

Summary Aim: To evaluate the sound pressure level to which preschool students are exposed. Method: This was a prospective, quantitative, nonexperimental, and descriptive study. To achieve the aim of the study we used an audio dosimeter. The sound pressure level (SPL) measurements were obtained for 2 age based classrooms. Preschool I and II. The measurements were obtained over 4 days in 8-hour sessions, totaling 1920 minutes. Results: Compared with established standards, the SPL measured ranged from 40.6 dB (A) to 105.8 dB (A). The frequency spectrum of the SPL was concentrated in the frequency range between 500 Hz and 4000 Hz. The older children produced higher SPLs than the younger ones, and the levels varied according to the activity performed. Painting and writing were the quietest activities, while free activities period and games were the noisiest. Conclusion: The SPLs measured at the preschool were higher and exceeded the maximum permitted level according to the reference standards. Therefore, the implementation of actions that aim to minimize the negative impact of noise in this environment is essential. PMID:25992013

Echolocation-Based Foraging by Harbor Porpoises and Sperm Whales, Including Effects on Noise and Acoustic Propagation

DTIC Science & Technology

2008-09-01

Behavioural Point Process Data 234 Appendix B: Matlab Code 258 Matlab Code Used in Chapter 2 (Porpoise Prey Capture Analysis) 258 Click Extraction and...Measurement of Click Properties 258 Envelope-based Click Detector 262 Matlab Code Used in Chapter 3 (Transmission Loss in Porpoise Habitats) ..267...Click Extraction from Data Wavefiles 267 Click Level Determination (Grand Manan Datasets) 270 Click Level Determination (Danish Datasets) 287 Matlab

Improving integrity of on-line grammage measurement with traceable basic calibration.

PubMed

Kangasrääsiö, Juha

2010-07-01

The automatic control of grammage (basis weight) in paper and board production is based upon on-line grammage measurement. Furthermore, the automatic control of other quality variables such as moisture, ash content and coat weight, may rely on the grammage measurement. The integrity of Kr-85 based on-line grammage measurement systems was studied, by performing basic calibrations with traceably calibrated plastic reference standards. The calibrations were performed according to the EN ISO/IEC 17025 standard, which is a requirement for calibration laboratories. The observed relative measurement errors were 3.3% in the first time calibrations at the 95% confidence level. With the traceable basic calibration method, however, these errors can be reduced to under 0.5%, thus improving the integrity of on-line grammage measurements. Also a standardised algorithm, based on the experience from the performed calibrations, is proposed to ease the adjustment of the different grammage measurement systems. The calibration technique can basically be applied to all beta-radiation based grammage measurements. 2010 ISA. Published by Elsevier Ltd. All rights reserved.

Review of measured vibration and noise environments experienced by passengers in aircraft and in ground transportation systems

NASA Technical Reports Server (NTRS)

Stephens, D. G.

1975-01-01

Measured vibration and interior noise data are presented for a number of air and surface vehicles. Consideration is given to the importance of direction effects; of vehicle operations such as take-off, cruise, and landing; and of measurement location on the level and frequency of the measurements. Various physical measurement units or descriptors are used to quantify and compare the data. Results suggest the range of vibration and noise associated with a particular mode of transportation and illustrate the comparative levels in terms of each of the descriptors. Collectively, the results form a data base which may be useful in assessing the ride of existing or future systems relative to vehicles in current operation.

Lanthanide complexes as luminogenic probes to measure sulfide levels in industrial samples.

PubMed

Thorson, Megan K; Ung, Phuc; Leaver, Franklin M; Corbin, Teresa S; Tuck, Kellie L; Graham, Bim; Barrios, Amy M

2015-10-08

A series of lanthanide-based, azide-appended complexes were investigated as hydrogen sulfide-sensitive probes. Europium complex 1 and Tb complex 3 both displayed a sulfide-dependent increase in luminescence, while Tb complex 2 displayed a decrease in luminescence upon exposure to NaHS. The utility of the complexes for monitoring sulfide levels in industrial oil and water samples was investigated. Complex 3 provided a sensitive measure of sulfide levels in petrochemical water samples (detection limit ∼ 250 nM), while complex 1 was capable of monitoring μM levels of sulfide in partially refined crude oil. Copyright © 2015 Elsevier B.V. All rights reserved.

Estimates of Mumps Seroprevalence May Be Influenced by Antibody Specificity and Serologic Method

PubMed Central

McGrew, Marcia; Williams, Nobia J.; Sowers, Sun B.; Bellini, William J.; Hickman, Carole J.

2014-01-01

Neutralizing antibodies are assumed to be essential for protection against mumps virus infection, but their measurement is labor- and time-intensive. For this reason, enzyme-linked immunosorbent assays (ELISAs) are typically used to measure mumps-specific IgG levels. However, since there is poor correlation between mumps neutralization titers and ELISAs that measure the presence of mumps-specific IgG levels, ELISAs that better correlate with neutralization are needed. To address this issue, we measured mumps antibody levels by plaque reduction neutralization, by a commercial ELISA (whole-virus antigen), and by ELISAs specific for the mumps nucleoprotein and hemagglutinin. The results indicate that differences in the antibody response to the individual mumps proteins could partially explain the lack of correlation among various serologic tests. Furthermore, the data indicate that some seropositive individuals have low levels of neutralizing antibody. If neutralizing antibody is important for protection, this suggests that previous estimates of immunity based on whole-virus ELISAs may be overstated. PMID:24371258

Elaboration and formalization of current scientific knowledge of risks and preventive measures illustrated by colorectal cancer.

PubMed

Giorgi, R; Gouvernet, J; Dufour, J; Degoulet, P; Laugier, R; Quilichini, F; Fieschi, M

2001-01-01

Present the method used to elaborate and formalize current scientific knowledge to provide physicians with tools available on the Internet, that enable them to evaluate individual patient risk, give personalized preventive recommendations or early screening measures. The approach suggested in this article is in line with medical procedures based on levels of evidence (Evidence-based Medicine). A cyclical process for developing recommendations allows us to quickly incorporate current scientific information. At each phase, the analysis is reevaluated by experts in the field collaborating on the project. The information is formalized through the use of levels of evidence and grades of recommendations. GLIF model is used to implement recommendations for clinical practice guidelines. The most current scientific evidence incorporated in a cyclical process includes several steps: critical analysis according to the Evidence-based Medicine method; identification of predictive factors; setting-up risk levels; identification of prevention measures; elaboration of personalized recommendation. The information technology implementation of the clinical practice guideline enables physicians to quickly obtain personalized information for their patients. Cases of colorectal prevention illustrate our approach. Integration of current scientific knowledge is an important process. The delay between the moment new information arrives and the moment the practitioner applies it, is thus reduced.

Cepheids Geometrical Distances Using Space Interferometry

NASA Astrophysics Data System (ADS)

Marengo, M.; Karovska, M.; Sasselov, D. D.; Sanchez, M.

2004-05-01

A space based interferometer with a sub-milliarcsecond resolution in the UV-optical will provide a new avenue for the calibration of primary distance indicators with unprecedented accuracy, by allowing very accurate and stable measurements of Cepheids pulsation amplitudes at wavelengths not accessible from the ground. Sasselov & Karovska (1994) have shown that interferometers allow very accurate measurements of Cepheids distances by using a ``geometric'' variant of the Baade-Wesselink method. This method has been succesfully applied to derive distances and radii of nearby Cepheids using ground-based near-IR and optical interferometers, within a 15% accuracy level. Our study shows that the main source of error in these measurements is due to the perturbing effects of the Earth atmosphere, which is the limiting factor in the interferometer stability. A space interferometer will not suffer from this intrinsic limitations, and can potentially lead to improve astronomical distance measurements by an order of magnitude in precision. We discuss here the technical requirements that a space based facility will need to carry out this project, allowing distance measurements within a few percent accuracy level. We will finally discuss how a sub-milliarcsecond resolution will allow the direct distance determination for hundreds of galactic sources, and provide a substantial improvement in the zero-point of the Cepheid distance scale.

Assessing the Gap Between Top-down and Bottom-up Measured Methane Emissions in Indianapolis, IN.

NASA Astrophysics Data System (ADS)

Prasad, K.; Lamb, B. K.; Cambaliza, M. O. L.; Shepson, P. B.; Stirm, B. H.; Salmon, O. E.; Lavoie, T. N.; Lauvaux, T.; Ferrara, T.; Howard, T.; Edburg, S. L.; Whetstone, J. R.

2014-12-01

Releases of methane (CH4) from the natural gas supply chain in the United States account for approximately 30% of the total US CH4 emissions. However, there continues to be large questions regarding the accuracy of current emission inventories for methane emissions from natural gas usage. In this paper, we describe results from top-down and bottom-up measurements of methane emissions from the large isolated city of Indianapolis. The top-down results are based on aircraft mass balance and tower based inverse modeling methods, while the bottom-up results are based on direct component sampling at metering and regulating stations, surface enclosure measurements of surveyed pipeline leaks, and tracer/modeling methods for other urban sources. Mobile mapping of methane urban concentrations was also used to identify significant sources and to show an urban-wide low level enhancement of methane levels. The residual difference between top-down and bottom-up measured emissions is large and cannot be fully explained in terms of the uncertainties in top-down and bottom-up emission measurements and estimates. Thus, the residual appears to be, at least partly, attributed to a significant wide-spread diffusive source. Analyses are included to estimate the size and nature of this diffusive source.

Radon measurements and dose estimate of workers in a manganese ore mine.

PubMed

Shahrokhi, Amin; Vigh, Tamás; Németh, Csaba; Csordás, Anita; Kovács, Tibor

2017-06-01

In the new European Basic Safety Standard (EU-BSS), a new reference level for indoor radon concentration in workplaces has recommended that the annual average activity concentration of indoor radon shall not be higher than 300Bqm -3 . This paper describes the radon concentration level in an underground workplace (manganese ore mine) over long time intervals (4 years). Several common radon monitors devices - including NRPB and Raduet (as a passive method based on CR-39), AlphaGUARD PQ 2000Pro, SARAD EQF3220, TESLA and Pylon WLX (as active methods) - were used for continuous radon measurements. The output results were used, first, to comprised the result of each device, based on conditions present in underground mines; Second, to have comprehensive measurements about all factors that cause workers exposure to radiation (each monitoring device specified for a unique measurement). The results indicate that the mine's staff had successful efforts to reach the strict requirement of the new EU-BSS, and the average annual radon activity concentrations during the working hours were below 300Bqm -3 in the investigated period. The paper presents the effective dose calculations; applying different equilibrium factors suggested by the literature and calculated basing on our measurements at the site, concluding that the differences could be about threefold. Copyright © 2017 Elsevier Ltd. All rights reserved.

Experimental Analysis of Steel Beams Subjected to Fire Enhanced by Brillouin Scattering-Based Fiber Optic Sensor Data

PubMed Central

Bao, Yi; Chen, Yizheng; Hoehler, Matthew S.; Smith, Christopher M.; Bundy, Matthew; Chen, Genda

2016-01-01

This paper presents high temperature measurements using a Brillouin scattering-based fiber optic sensor and the application of the measured temperatures and building code recommended material parameters into enhanced thermomechanical analysis of simply supported steel beams subjected to combined thermal and mechanical loading. The distributed temperature sensor captures detailed, nonuniform temperature distributions that are compared locally with thermocouple measurements with less than 4.7% average difference at 95% confidence level. The simulated strains and deflections are validated using measurements from a second distributed fiber optic (strain) sensor and two linear potentiometers, respectively. The results demonstrate that the temperature-dependent material properties specified in the four investigated building codes lead to strain predictions with less than 13% average error at 95% confidence level and that the Europe building code provided the best predictions. However, the implicit consideration of creep in Europe is insufficient when the beam temperature exceeds 800°C. PMID:28239230

Combined visualization for noise mapping of industrial facilities based on ray-tracing and thin plate splines

NASA Astrophysics Data System (ADS)

Ovsiannikov, Mikhail; Ovsiannikov, Sergei

2017-01-01

The paper presents the combined approach to noise mapping and visualizing of industrial facilities sound pollution using forward ray tracing method and thin-plate spline interpolation. It is suggested to cauterize industrial area in separate zones with similar sound levels. Equivalent local source is defined for range computation of sanitary zones based on ray tracing algorithm. Computation of sound pressure levels within clustered zones are based on two-dimension spline interpolation of measured data on perimeter and inside the zone.

Measuring geographical accessibility to palliative and end of life (PEoLC) related facilities: a comparative study in an area with well-developed specialist palliative care (SPC) provision.

PubMed

Pearson, Clare; Verne, Julia; Wells, Claudia; Polato, Giovanna M; Higginson, Irene J; Gao, Wei

2017-01-26

Geographical accessibility is important in accessing healthcare services. Measuring it has evolved alongside technological and data analysis advances. High correlations between different methods have been detected, but no comparisons exist in the context of palliative and end of life care (PEoLC) studies. To assess how geographical accessibility can affect PEoLC, selection of an appropriate method to capture it is crucial. We therefore aimed to compare methods of measuring geographical accessibility of decedents to PEoLC-related facilities in South London, an area with well-developed SPC provision. Individual-level death registration data in 2012 (n = 18,165), from the Office for National Statistics (ONS) were linked to area-level PEoLC-related facilities from various sources. Simple and more complex measures of geographical accessibility were calculated using the residential postcodes of the decedents and postcodes of the nearest hospital, care home and hospice. Distance measures (straight-line, travel network) and travel times along the road network were compared using geographic information system (GIS) mapping and correlation analysis (Spearman rho). Borough-level maps demonstrate similarities in geographical accessibility measures. Strong positive correlation exist between straight-line and travel distances to the nearest hospital (rho = 0.97), care home (rho = 0.94) and hospice (rho = 0.99). Travel times were also highly correlated with distance measures to the nearest hospital (rho range = 0.84-0.88), care home (rho = 0.88-0.95) and hospice (rho = 0.93-0.95). All correlations were significant at p < 0.001 level. Distance-based and travel-time measures of geographical accessibility to PEoLC-related facilities in South London are similar, suggesting the choice of measure can be based on the ease of calculation.

Feasibility of the music therapy assessment tool for awareness in disorders of consciousness (MATADOC) for use with pediatric populations

PubMed Central

Magee, Wendy L.; Ghetti, Claire M.; Moyer, Alvin

2015-01-01

Measuring responsiveness to gain accurate diagnosis in populations with disorders of consciousness (DOC) is of central concern because these patients have such complex clinical presentations. Due to the uncertainty of accuracy for both behavioral and neurophysiological measures in DOC, combined assessment approaches are recommended. A number of standardized behavioral measures can be used with adults with DOC with minor to moderate reservations relating to the measures’ psychometric properties and clinical applicability. However, no measures have been standardized for use with pediatric DOC populations. When adapting adult measures for children, confounding factors include developmental considerations for language-based items included in all DOC measures. Given the lack of pediatric DOC measures, there is a pressing need for measures that are sensitive to the complex clinical presentations typical of DOC and that can accommodate the developmental levels of pediatric populations. The music therapy assessment tool for awareness in disorders of consciousness (MATADOC) is a music-based measure that has been standardized for adults with DOC. Given its emphasis on non-language based sensory stimuli, it is well-suited to pediatric populations spanning developmental stages. In a pre-pilot exploratory study, we examined the clinical utility of this measure and explored trends for test-retest and inter-rater agreement as well as its performance against external reference standards. In several cases, MATADOC items in the visual and auditory domains produced outcomes suggestive of higher level functioning when compared to outcomes provided by other DOC measures. Preliminary findings suggest that the MATADOC provides a useful protocol and measure for behavioral assessment and clinical treatment planning with pediatric DOC. Further research with a larger sample is warranted to test a version of the MATADOC that is refined to meet developmental needs of pediatric DOC populations. PMID:26074850

Reliable individual-level neural markers of high-level language processing: A necessary precursor for relating neural variability to behavioral and genetic variability.

PubMed

Mahowald, Kyle; Fedorenko, Evelina

2016-10-01

The majority of functional neuroimaging investigations aim to characterize an average human brain. However, another important goal of cognitive neuroscience is to understand the ways in which individuals differ from one another and the significance of these differences. This latter goal is given special weight by the recent reconceptualization of neurological disorders where sharp boundaries are no longer drawn either between health and neuropsychiatric and neurodevelopmental disorders, or among different disorders (e.g., Insel et al., 2010). Consequently, even the variability in the healthy population can inform our understanding of brain disorders. However, because the use of functional neural markers is still in its infancy, no consensus presently exists about which measures (e.g., effect size?, extent of activation?, degree of lateralization?) are the best ones to use. We here attempt to address this question with respect to one large-scale neural system: the set of brain regions in the frontal and temporal cortices that jointly support high-level linguistic processing (e.g., Binder et al., 1997; Fedorenko, Hsieh, Nieto-Castanon, Whitfield-Gabrieli, & Kanwisher, 2010). In particular, using data from 150 individuals all of whom had performed a language "localizer" task contrasting sentences and nonword sequences (Fedorenko et al., 2010), we: a) characterize the distributions of the values for four key neural measures of language activity (region effect sizes, region volumes, lateralization based on effect sizes, and lateralization based on volumes); b) test the reliability of these measures in a subset of 32 individuals who were scanned across two sessions; c) evaluate the relationship among the different regions of the language system; and d) evaluate the relationship among the different neural measures. Based on our results, we provide some recommendations for future studies of brain-behavior and brain-genes relationships. Although some of our conclusions are specific to the language system, others (e.g., the fact that effect-size-based measures tend to be more reliable than volume-based measures) are likely to generalize to the rest of the brain. Copyright © 2016 Elsevier Inc. All rights reserved.

Association of Body Mass Index With Self-Report and Performance-Based Measures of Balance and Mobility

PubMed Central

Wert, David M.; Hile, Elizabeth S.; Studenski, Stephanie A.; Brach, Jennifer S.

2011-01-01

Background The incidence of obesity is increasing in older adults, with associated worsening in the burden of disability. Little is known about the impact of body mass index (BMI) on self-report and performance-based balance and mobility measures in older adults. Objective The purposes of this study were (1) to examine the association of BMI with measures of balance and mobility and (2) to explore potential explanatory factors. Design This was a cross-sectional, observational study. Methods Older adults (mean age=77.6 years) who participated in an ongoing observational study (N=120) were classified as normal weight (BMI=18.5–24.9 kg/m2), overweight (BMI=25.0–29.9 kg/m2), moderately obese (BMI=30.0–34.9 kg/m2), or severely obese (BMI≥35 kg/m2). Body mass index data were missing for one individual; thus, data for 119 participants were included in the analysis. Mobility and balance were assessed using self-report and performance-based measures and were compared among weight groups using analysis of variance and chi-square analysis for categorical data. Multiple linear regression analysis was used to examine the association among BMI, mobility, and balance after controlling for potential confounding variables. Results Compared with participants who were of normal weight or overweight, those with moderate or severe obesity were less likely to report their mobility as very good or excellent (52%, 55%, 39%, and 6%, respectively); however, there was no difference in self-report of balance among weight groups. Participants with severe obesity (n=17) had the lowest levels of mobility on the performance-based measures, followed by those who were moderately obese (n=31), overweight (n=42), and of normal weight (n=29). There were no differences on performance-based balance measures among weight groups. After controlling for age, sex, minority status, physical activity level, education level, and comorbid conditions, BMI still significantly contributed to mobility (β=−.02, adjusted R2=.41). Conclusions Although older adults with severe obesity were most impaired, those with less severe obesity also demonstrated significant decrements in mobility. PMID:21680770

An Investigation of Widespread Ozone Damage to the Soybean Crop in the Upper Midwest Determined From Ground-Based and Satellite Measurements

NASA Technical Reports Server (NTRS)

Fishman, Jack; Creilson, John K.; Parker, Peter A.; Ainsworth, Elizabeth A.; Vining, G. Geoffrey; Szarka, John; Booker, Fitzgerald L.; Xu, Xiaojing

2010-01-01

Elevated concentrations of ground-level ozone (O3) are frequently measured over farmland regions in many parts of the world. While numerous experimental studies show that O3 can significantly decrease crop productivity, independent verifications of yield losses at current ambient O3 concentrations in rural locations are sparse. In this study, soybean crop yield data during a 5-year period over the Midwest of the United States were combined with ground and satellite O3 measurements to provide evidence that yield losses on the order of 10% could be estimated through the use of a multiple linear regression model. Yield loss trends based on both conventional ground-based instrumentation and satellite-derived tropospheric O3 measurements were statistically significant and were consistent with results obtained from open-top chamber experiments and an open-air experimental facility (SoyFACE, Soybean Free Air Concentration Enrichment) in central Illinois. Our analysis suggests that such losses are a relatively new phenomenon due to the increase in background tropospheric O3 levels over recent decades. Extrapolation of these findings supports previous studies that estimate the global economic loss to the farming community of more than $10 billion annually.

Measuring factors affecting implementation of health innovations: a systematic review of structural, organizational, provider, patient, and innovation level measures

PubMed Central

2013-01-01

Background Two of the current methodological barriers to implementation science efforts are the lack of agreement regarding constructs hypothesized to affect implementation success and identifiable measures of these constructs. In order to address these gaps, the main goals of this paper were to identify a multi-level framework that captures the predominant factors that impact implementation outcomes, conduct a systematic review of available measures assessing constructs subsumed within these primary factors, and determine the criterion validity of these measures in the search articles. Method We conducted a systematic literature review to identify articles reporting the use or development of measures designed to assess constructs that predict the implementation of evidence-based health innovations. Articles published through 12 August 2012 were identified through MEDLINE, CINAHL, PsycINFO and the journal Implementation Science. We then utilized a modified five-factor framework in order to code whether each measure contained items that assess constructs representing structural, organizational, provider, patient, and innovation level factors. Further, we coded the criterion validity of each measure within the search articles obtained. Results Our review identified 62 measures. Results indicate that organization, provider, and innovation-level constructs have the greatest number of measures available for use, whereas structural and patient-level constructs have the least. Additionally, relatively few measures demonstrated criterion validity, or reliable association with an implementation outcome (e.g., fidelity). Discussion In light of these findings, our discussion centers on strategies that researchers can utilize in order to identify, adapt, and improve extant measures for use in their own implementation research. In total, our literature review and resulting measures compendium increases the capacity of researchers to conceptualize and measure implementation-related constructs in their ongoing and future research. PMID:23414420

Motorcycle Mechanic. Teacher Edition.

ERIC Educational Resources Information Center

Baugus, Mickey; Fulkerson, Dan, Ed.

These teacher's materials are for a 19-unit competency-based course on entry-level motorcycle mechanics at the secondary and postsecondary levels. The 19 units are: (1) introduction to motorcycle repair; (2) general safety; (3) tools and equipment; (4) metric measurements; (5) fasteners; (6) service department operations; (7) motorcycle engines;…

Ultra-Precision Measurement and Control of Angle Motion in Piezo-Based Platforms Using Strain Gauge Sensors and a Robust Composite Controller

PubMed Central

Liu, Lei; Bai, Yu-Guang; Zhang, Da-Li; Wu, Zhi-Gang

2013-01-01

The measurement and control strategy of a piezo-based platform by using strain gauge sensors (SGS) and a robust composite controller is investigated in this paper. First, the experimental setup is constructed by using a piezo-based platform, SGS sensors, an AD5435 platform and two voltage amplifiers. Then, the measurement strategy to measure the tip/tilt angles accurately in the order of sub-μrad is presented. A comprehensive composite control strategy design to enhance the tracking accuracy with a novel driving principle is also proposed. Finally, an experiment is presented to validate the measurement and control strategy. The experimental results demonstrate that the proposed measurement and control strategy provides accurate angle motion with a root mean square (RMS) error of 0.21 μrad, which is approximately equal to the noise level. PMID:23860316

Improving the psychometric properties of dot-probe attention measures using response-based computation.

PubMed

Evans, Travis C; Britton, Jennifer C

2018-09-01

Abnormal threat-related attention in anxiety disorders is most commonly assessed and modified using the dot-probe paradigm; however, poor psychometric properties of reaction-time measures may contribute to inconsistencies across studies. Typically, standard attention measures are derived using average reaction-times obtained in experimentally-defined conditions. However, current approaches based on experimentally-defined conditions are limited. In this study, the psychometric properties of a novel response-based computation approach to analyze dot-probe data are compared to standard measures of attention. 148 adults (19.19 ± 1.42 years, 84 women) completed a standardized dot-probe task including threatening and neutral faces. We generated both standard and response-based measures of attention bias, attentional orientation, and attentional disengagement. We compared overall internal consistency, number of trials necessary to reach internal consistency, test-retest reliability (n = 72), and criterion validity obtained using each approach. Compared to standard attention measures, response-based measures demonstrated uniformly high levels of internal consistency with relatively few trials and varying improvements in test-retest reliability. Additionally, response-based measures demonstrated specific evidence of anxiety-related associations above and beyond both standard attention measures and other confounds. Future studies are necessary to validate this approach in clinical samples. Response-based attention measures demonstrate superior psychometric properties compared to standard attention measures, which may improve the detection of anxiety-related associations and treatment-related changes in clinical samples. Copyright © 2018 Elsevier Ltd. All rights reserved.

Interval-level measurement with visual analogue scales in Internet-based research: VAS Generator.

PubMed

Reips, Ulf-Dietrich; Funke, Frederik

2008-08-01

The present article describes VAS Generator (www.vasgenerator.net), a free Web service for creating a wide range of visual analogue scales that can be used as measurement devices in Web surveys and Web experimentation, as well as for local computerized assessment. A step-by-step example for creating and implementing a visual analogue scale with visual feedback is given. VAS Generator and the scales it generates work independently of platforms and use the underlying languages HTML and JavaScript. Results from a validation study with 355 participants are reported and show that the scales generated with VAS Generator approximate an interval-scale level. In light of previous research on visual analogue versus categorical (e.g., radio button) scales in Internet-based research, we conclude that categorical scales only reach ordinal-scale level, and thus visual analogue scales are to be preferred whenever possible.

Real Time Monitoring System of Pollution Waste on Musi River Using Support Vector Machine (SVM) Method

NASA Astrophysics Data System (ADS)

Fachrurrozi, Muhammad; Saparudin; Erwin

2017-04-01

Real-time Monitoring and early detection system which measures the quality standard of waste in Musi River, Palembang, Indonesia is a system for determining air and water pollution level. This system was designed in order to create an integrated monitoring system and provide real time information that can be read. It is designed to measure acidity and water turbidity polluted by industrial waste, as well as to show and provide conditional data integrated in one system. This system consists of inputting and processing the data, and giving output based on processed data. Turbidity, substances, and pH sensor is used as a detector that produce analog electrical direct current voltage (DC). Early detection system works by determining the value of the ammonia threshold, acidity, and turbidity level of water in Musi River. The results is then presented based on the level group pollution by the Support Vector Machine classification method.

Sound radiation from randomly vibrating beams of finite circular cross section

NASA Technical Reports Server (NTRS)

Sutterlin, M. W.; Pierce, A. D.

1976-01-01

The radiation of sound from vibrating cylindrical beams is analyzed based on the frequency of the beam vibrations and the physical characteristics of the beam and its surroundings. A statistical analysis of random beam vibrations allows this result to be independent of the boundary conditions at the ends of the beam. The acoustic power radiated by the beam can be determined from a knowledge of the frequency band vibration data without a knowledge of the individual modal vibration amplitudes. A practical example of the usefulness of this technique is provided by the application of the theoretical calculations to the prediction of the octave band acoustic power output of the picking sticks of an automatic textile loom. Calculations are made of the expected octave band sound pressure levels based on measured acceleration data. These theoretical levels are subsequently compared with actual sound pressure level measurements of loom noise.

A comprehensive study of radon levels and associated radiation doses in Himalayan groundwater

NASA Astrophysics Data System (ADS)

Prasad, Mukesh; Kumar, G. Anil; Sahoo, B. K.; Ramola, R. C.

2018-03-01

The concentration of radon in groundwater is mainly governed by the radium content in the rocks of the aquifer. The internal exposure to high levels of radon in water is directly associated with the radiological risk to members of public. In this work, radon concentrations were measured in groundwater of Garhwal Himalaya, India, using scintillation detector-based RnDuo and silicon detector-based RAD7 monitors. An inter-comparison exercise was carried out between RnDuo and RAD7 techniques for a few samples to validate the results. The radiation doses associated with the exposure to radon in water were estimated from measured values of activity concentrations. An attempt has been made to see the effect of geology, geohydrology and different types of sources on radon levels in Himalayan groundwater. The experimental techniques and results obtained are discussed in detail.

Using the Concept of "Population Dose" in Planning and Evaluating Community-Level Obesity Prevention Initiatives

ERIC Educational Resources Information Center

Cheadle, Allen; Schwartz, Pamela M.; Rauzon, Suzanne; Bourcier, Emily; Senter, Sandra; Spring, Rebecca; Beery, William L.

2013-01-01

When planning and evaluating community-level initiatives focused on policy and environment change, it is useful to have estimates of the impact on behavioral outcomes of particular strategies (e.g., building a new walking trail to promote physical activity). We have created a measure of estimated strategy-level impact--"population dose"--based on…

Multi-interface level in oil tanks and applications of optical fiber sensors

NASA Astrophysics Data System (ADS)

Leal-Junior, Arnaldo G.; Marques, Carlos; Frizera, Anselmo; Pontes, Maria José

2018-01-01

On the oil production also involves the production of water, gas and suspended solids, which are separated from the oil on three-phase separators. However, the control strategies of an oil separator are limited due to unavailability of suitable multi-interface level sensors. This paper presents a description of the multi-phase level problem on the oil industry and a review of the current technologies for multi-interface level assessment. Since optical fiber sensors present chemical stability, intrinsic safety, electromagnetic immunity, lightweight and multiplexing capabilities, it can be an alternative for multi-interface level measurement that can overcome some of the limitations of the current technologies. For this reason, Fiber Bragg Gratings (FBGs) based optical fiber sensor system for multi-interface level assessment is proposed, simulated and experimentally assessed. The results show that the proposed sensor system is capable of measuring interface level with a relative error of only 2.38%. Furthermore, the proposed sensor system is also capable of measuring the oil density with an error of 0.8 kg/m3.

Task-dependent response conflict monitoring and cognitive control in anterior cingulate and dorsolateral prefrontal cortices.

PubMed

Kim, Chobok; Chung, Chongwook; Kim, Jeounghoon

2013-11-06

Previous experience affects our behavior in terms of adjustments. It has been suggested that the conflict monitor-controller system implemented in the prefrontal cortex plays a critical role in such adjustments. Previous studies suggested that there exists multiple conflict monitor-controller systems associated with the level of information (i.e., stimulus and response levels). In this study, we sought to test whether different types of conflicts occur at the same information processing level (i.e., response level) are independently processed. For this purpose, we designed a task paradigm to measure two different types of response conflicts using color-based and location-based conflict stimuli and measured the conflict adaptation effects associated with the two types of conflicts either independently (i.e., single conflict conditions) or simultaneously (i.e., a double-conflict condition). The behavioral results demonstrated that performance on current incongruent trials was faster only when the preceding trial was the same type of response conflict regardless of whether they included a single- or double-conflict. Imaging data also showed that anterior cingulate and dorsolateral prefrontal cortices operate in a task-specific manner. These findings suggest that there may be multiple monitor-controller loops for color-based and location-based conflicts even at the same response level. Importantly, our results suggest that double-conflict processing is qualitatively different from single-conflict processing although double-conflict shares the same sources of conflict with two single-conflict conditions. © 2013 Published by Elsevier B.V.

Four-and-one-half years' experience in monitoring of reproducibility of an MR spectroscopy system--application of in vitro results to interpretation of in vivo data.

PubMed

Skorupa, Agnieszka; Wicher, Magdalena; Banasik, Tomasz; Jamroz, Ewa; Paprocka, Justyna; Kiełtyka, Aleksandra; Sokół, Maria; Konopka, Marek

2014-05-08

The primary purpose of this work was to assess long-term in vitro reproducibility of metabolite levels measured using 1H MRS (proton magnetic resonance spectroscopy). The secondary purpose was to use the in vitro results for interpretation of 1H MRS in vivo spectra acquired from patients diagnosed with Canavan disease. 1H MRS measurements were performed in the period from April 2006 to September 2010. 118 short and 116 long echo spectra were acquired from a stable phantom during this period. Change-point analysis of the in vitro N-acetylaspartate levels was exploited in the computation of fT factor (ratio of the actual to the reference N-acetylaspartate level normalized by the reciprocity principle). This coefficient was utilized in the interpretation of in vivo spectra analyzed using absolute reference technique. The monitored time period was divided into six time intervals based on short echo in vitro data (seven time intervals based on long echo in vitro data) characterized by fT coefficient ranging from 0.97 to 1.09 (based on short echo data) and from 1.0 to 1.11 (based on long echo data). Application of this coefficient to interpretation of in vivo spectra confirmed increased N-acetylaspartate level in Canavan disease. Long-term monitoring of an MRS system reproducibility, allowing for absolute referencing of metabolite levels, facilitates interpretation of metabolic changes in white matter disorders.

Off-line wafer level reliability control: unique measurement method to monitor the lifetime indicator of gate oxide validated within bipolar/CMOS/DMOS technology

NASA Astrophysics Data System (ADS)

Gagnard, Xavier; Bonnaud, Olivier

2000-08-01

We have recently published a paper on a new rapid method for the determination of the lifetime of the gate oxide involved in a Bipolar/CMOS/DMOS technology (BCD). Because this previous method was based on a current measurement with gate voltage as a parameter needing several stress voltages, it was applied only by lot sampling. Thus, we tried to find an indicator in order to monitor the gate oxide lifetime during the wafer level parametric test and involving only one measurement of the device on each wafer test cell. Using the Weibull law and Crook model, combined with our recent model, we have developed a new test method needing only one electrical measurement of MOS capacitor to monitor the quality of the gate oxide. Based also on a current measurement, the parameter is the lifetime indicator of the gate oxide. From the analysis of several wafers, we gave evidence of the possibility to detect a low performance wafer, which corresponds to the infantile failure on the Weibull plot. In order to insert this new method in the BCD parametric program, a parametric flowchart was established. This type of measurement is an important challenges, because the actual measurements, breakdown charge, Qbd, and breakdown electric field, Ebd, at parametric level and Ebd and interface states density, Dit during the process cannot guarantee the gate oxide lifetime all along fabrication process. This indicator measurement is the only one, which predicts the lifetime decrease.

Hysteresis in Carbon Nanotube Transistors: Measurement and Analysis of Trap Density, Energy Level, and Spatial Distribution.

PubMed

Park, Rebecca Sejung; Shulaker, Max Marcel; Hills, Gage; Suriyasena Liyanage, Luckshitha; Lee, Seunghyun; Tang, Alvin; Mitra, Subhasish; Wong, H-S Philip

2016-04-26

We present a measurement technique, which we call the Pulsed Time-Domain Measurement, for characterizing hysteresis in carbon nanotube field-effect transistors, and demonstrate its applicability for a broad range of 1D and 2D nanomaterials beyond carbon nanotubes. The Pulsed Time-Domain Measurement enables the quantification (density, energy level, and spatial distribution) of charged traps responsible for hysteresis. A physics-based model of the charge trapping process for a carbon nanotube field-effect transistor is presented and experimentally validated using the Pulsed Time-Domain Measurement. Leveraging this model, we discover a source of traps (surface traps) unique to devices with low-dimensional channels such as carbon nanotubes and nanowires (beyond interface traps which exist in today's silicon field-effect transistors). The different charge trapping mechanisms for interface traps and surface traps are studied based on their temperature dependencies. Through these advances, we are able to quantify the interface trap density for carbon nanotube field-effect transistors (∼3 × 10(13) cm(-2) eV(-1) near midgap), and compare this against a range of previously studied dielectric/semiconductor interfaces.

The application of compressive sampling in rapid ultrasonic computerized tomography (UCT) technique of steel tube slab (STS).

PubMed

Jiang, Baofeng; Jia, Pengjiao; Zhao, Wen; Wang, Wentao

2018-01-01

This paper explores a new method for rapid structural damage inspection of steel tube slab (STS) structures along randomly measured paths based on a combination of compressive sampling (CS) and ultrasonic computerized tomography (UCT). In the measurement stage, using fewer randomly selected paths rather than the whole measurement net is proposed to detect the underlying damage of a concrete-filled steel tube. In the imaging stage, the ℓ1-minimization algorithm is employed to recover the information of the microstructures based on the measurement data related to the internal situation of the STS structure. A numerical concrete tube model, with the various level of damage, was studied to demonstrate the performance of the rapid UCT technique. Real-world concrete-filled steel tubes in the Shenyang Metro stations were detected using the proposed UCT technique in a CS framework. Both the numerical and experimental results show the rapid UCT technique has the capability of damage detection in an STS structure with a high level of accuracy and with fewer required measurements, which is more convenient and efficient than the traditional UCT technique.

Design, development and calibration of HTS wire based LOX level sensor probe

NASA Astrophysics Data System (ADS)

Karunanithi, R.; Jacob, S.; Nadig, D. S.; Prasad, M. V. N.; Gour, A. S.; Gowthaman, M.; Deekshith, P.; Shrivastava, V.

2014-01-01

For space applications, the weight of the liquid level sensors are of major concern as they affect the payload fraction and hence the cost. An attempt is made to design and test a light weight High Temperature Superconductor (HTS) wire based liquid level sensor for Liquid Oxygen (LOX) tank used in the cryostage of the spacecraft. The total resistance value measured of the HTS wire is inversely proportional to the liquid level. A HTS wire (SF12100) of 12mm width and 2.76m length without copper stabilizer has been used in the level sensor. The developed HTS wire based LOX level sensor is calibrated against a discrete diode array type level sensor. Liquid Nitrogen (LN2) and LOX has been used as cryogenic fluid for the calibration purpose. The automatic data logging for the system has been done using LabVIEW11. The net weight of the developed sensor is less than 1 kg.

Integration of supercapacitive storage in renewable energy system to compare the response of two level and five level inverter with RL type load

NASA Astrophysics Data System (ADS)

Jana, Suman; Biswas, Pabitra Kumar; Das, Upama

2018-04-01

The analytical and simulation-based study in this presented paper shows a comparative report between two level inverter and five-level inverter with the integration of Supercapacitive storage in Renewable Energy system. Sometime dependent numerical models are used to measure the voltage and current response of two level and five level inverter in MATLAB Simulink based environment. In this study supercapacitive sources, which are fed by solar cells are used as input sources to experiment the response of multilevel inverter with integration of su-percapacitor as a storage device of Renewable Energy System. The RL load is used to compute the time response in MATLABSimulink based environment. With the simulation results a comparative study has been made of two different level types of inverters. Two basic types of inverter are discussed in the study with reference to their electrical behavior. It is also simulated that multilevel inverter can convert stored energy within supercapacitor which is extracted from Renewable Energy System.

Fiber-Optic Strain-Gage Tank Level Measurement System for Cryogenic Propellants

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Mitchell, Mark; Langford, Lester

2004-01-01

Measurement of tank level, particularly for cryogenic propellants, has proven to be a difficult problem. Current methods based on differential pressure, capacitance sensors, temperature sensors, etc.; do not provide sufficiently accurate or robust measurements, especially at run time. These methods are designed to measure tank-level, but when the fluids are in supercritical state, the liquid-gas interface disappears. Furthermore, there is a need for a non-intrusive measurement system; that is, the sensors should not require tank modifications and/or disturb the fluids. This paper describes a simple, but effective method to determine propellant mass by measuring very small deformations of the structure supporting the tank. Results of a laboratory study to validate the method, and experimental data from a deployed system are presented. A comparison with an existing differential pressure sensor shows that the strain gage system provides a much better quality signal across all regimes during an engine test. Experimental results also show that the use of fiber optic strain gages (FOSG) over classic foil strain gages extends the operation time (before the system becomes uncalibrated), and increases accuracy. Finally, a procedure is defined whereby measurements from the FOSG mounted on the tank supporting structure are compensated using measurements of a FOSG mounted on a reference plate and temperature measurements of the structure. Results describing the performance of a deployed system that measures tank level during propulsion tests are included.

Listening Effort Through Depth of Processing in School-Age Children.

PubMed

Hsu, Benson Cheng-Lin; Vanpoucke, Filiep; van Wieringen, Astrid

A reliable and practical measure of listening effort is crucial in the aural rehabilitation of children with communication disorders. In this article, we propose a novel behavioral paradigm designed to measure listening effort in school-age children based on different depths and levels of verbal processing. The paradigm consists of a classic word recognition task performed in quiet and in noise coupled to one of three additional tasks asking the children to judge the color of simple pictures or a certain semantic category of the presented words. The response time (RT) from the categorization tasks is considered the primary indicator of listening effort. The listening effort paradigm was evaluated in a group of 31 normal-hearing, normal-developing children 7 to 12 years of age. A total of 146 Dutch nouns were selected for the experiment after surveying 14 local Dutch-speaking children. Windows-based custom software was developed to administer the behavioral paradigm from a conventional laptop computer. A separate touch screen was used as a response interface to gather the RT data from the participants. Verbal repetition of each presented word was scored by the tester and a percentage-correct word recognition score (WRS) was calculated for each condition. Randomized lists of target words were presented in one of three signal to noise ratios (SNR) to examine the effect of background noise on the two outcome measures of WRS and RT. Three novel categorization tasks, each corresponding to a different depth or elaboration level of semantic processing, were developed to examine the effect of processing level on either WRS or RT. It was hypothesized that, while listening effort as measured by RT would be affected by both noise and processing level, WRS performance would be affected by changes in noise level only. The RT measure was also hypothesized to increase more from an increase in noise level in categorization conditions demanding a deeper or more elaborate form of semantic processing. There was a significant effect of SNR level on school-age children's WRS: their word recognition performance tended to decrease with increasing background noise level. However, depth of processing did not seem to affect WRS. Moreover, a repeated-measure analysis of variance fitted to transformed RT data revealed that this measure of listening effort in normal-hearing school-age children was significantly affected by both SNR level and the depth of semantic processing. There was no significant interaction between noise level and the type of categorization task with regard to RT. The observed patterns of WRS and RT supported the hypotheses regarding the effects of background noise and depth of processing on word recognition performance and a behavioral measure of listening effort. The magnitude of noise-induced change in RT did not differ between categorization tasks, however. Our findings point to future research directions regarding the potential effects of age, working memory capacity, and cross-modality interaction when measuring listening effort in different levels of semantic processing.

LCR circuit: new simple methods for measuring the equivalent series resistance of a capacitor and inductance of a coil

NASA Astrophysics Data System (ADS)

Ivković, Saša S.; Marković, Marija Z.; Ivković, Dragica Ž.; Cvetanović, Nikola

2017-09-01

Equivalent series resistance (ESR) represents the measurement of total energy loss in a capacitor. In this paper a simple method for measuring the ESR of ceramic capacitors based on the analysis of the oscillations of an LCR circuit is proposed. It is shown that at frequencies under 3300 Hz, the ESR is directly proportional to the period of oscillations. Based on the determined dependence of the ESR on the period, a method is devised and tested for measuring coil inductance. All measurements were performed using the standard equipment found in student laboratories, which makes both methods very suitable for implementation at high school and university levels.

Ground measurements of fuel and fuel consumption from experimental and operational prescribed fires at Eglin Air Force Base, Florida

Treesearch

Roger D. Ottmar; Robert E. Vihnanek; Clinton S. Wright; Andrew T. Hudak

2014-01-01

Ground-level measurements of fuel loading, fuel consumption, and fuel moisture content were collected on nine research burns conducted at Eglin Air Force Base, Florida in November, 2012. A grass or grass-shrub fuelbed dominated eight of the research blocks; the ninth was a managed longleaf pine (Pinus palustrus) forest. Fuel loading ranged from 1.7 Mg ha-1 on a...

Assessment of an organ‐based tube current modulation in thoracic computed tomography

PubMed Central

Sugai, Mai; Toyoda, Asami; Koshida, Haruka; Sakuta, Keita; Takata, Tadanori; Koshida, Kichiro; Iida, Hiroji; Matsui, Osamu

2012-01-01

Recently, specific computed tomography (CT) scanners have been equipped with organ‐based tube current modulation (TCM) technology. It is possible that organ‐based TCM will replace the conventional dose‐reduction technique of reducing the effective milliampere‐second. The aim of this study was to determine if organ‐based TCM could reduce radiation exposure to the breasts without compromising the image uniformity and beam hardening effect in thoracic CT examinations. Breast and skin radiation doses and the absorbed radiation dose distribution within a single section were measured with an anthropomorphic phantom and radiophotoluminescent glass dosimeters using four approaches to thoracic CT (reference, organ‐based TCM, copper shielding, and the combination of the above two techniques, hereafter referred to as the combination technique). The CT value and noise level were measured using the same calibration phantom. Organ‐based TCM and copper shielding reduced radiation doses to the breast by 23.7% and 21.8%, respectively. However, the CT value increased, especially in the anterior region, using copper shielding. In contrast, the CT value and noise level barely increased using organ‐based TCM. The combination technique reduced the radiation dose to the breast by 38.2%, but greatly increased the absorbed radiation dose from the central to the posterior regions. Moreover, the CT value increased in the anterior region and the noise level increased by more than 10% in the entire region. Therefore, organ‐based TCM can reduce radiation doses to breasts with only small increases in noise levels, making it preferable for specific groups of patients, such as children and young women. PACS numbers: 87.53.Bn; 87.57.Q‐; 87.57.qp PMID:22402390

The Ups and Downs of Measuring Sea Surface Salinity from Space

NASA Astrophysics Data System (ADS)

Banks, C. J.; Gommenginger, C. P.; Srokosz, M. A.; Snaith, H. M.

2012-12-01

In November 2009, the European Space Agency (ESA) launched the Soil Moisture and Ocean Salinity (SMOS) satellite and a new era of satellite oceanography began vastly improving our ability to synoptically measure sea surface salinity (SSS). SMOS was joined in June 2011 by the NASA/Argentine Aquarius/SAC-D mission designed specifically to measure SSS. Although there are significant differences in how both satellites retrieve SSS, both utilise passive systems to measure the response of the brightness temperature (Tb) at L-band (1.4 GHz). We report on-going investigations into the validation of SMOS and Aquarius 'Level 3' measurements of SSS using monthly data on a 1° by 1° global grid between 60°S and 60°N. Previous studies have indicated significant temporally varying differences between SSS from SMOS ascending passes and from SMOS descending passes: therefore, for both SMOS and Aquarius, data from ascending and descending passes will be studied separately. Both satellites have sun-synchronous orbits but the direction of travel for the two satellites are twelve hours out of phase (i.e. at approximately 6 a.m. local time SMOS is travelling south-to-north (ascending) and Aquarius is travelling north-to-south (descending) whereas at 6 p.m. the directions of travel are switched). For validation purposes two separate monthly, 1° by 1° datasets are used over the same locations as the satellite data. The first is based on averaged near-surface salinity (depth less than 10 m) as derived from the drifting Argo float programme. The second validation data source is output from the UK Met Office Forecasting Ocean Assimilation Model (FOAM) based on NEMO (Nucleus for European Modelling of the Ocean). The SMOS Level 3 products are developed from ESA Level 2 products after quality control (QC) based on flags and SSS error provided in the ESA Level 2 products. Aquarius data (QC) is based only on data flags and a simple selection of in-range SSS values ([30, 40]). The study is based on monthly products over the period from September 2011 to May 2012. We calculate maps of the difference between each possible pair of SSS datasets for each month, and consider their relationships using regression on the 1° values. The analysis is carried out for the global ocean, as well as for smaller, more homogeneous, study regions (e.g. SPURS). In addition, a study is made of the differences and similarities, at Level 2, between the two satellites and the direction of travel.

Food safety security: a new concept for enhancing food safety measures.

PubMed

Iyengar, Venkatesh; Elmadfa, Ibrahim

2012-06-01

The food safety security (FSS) concept is perceived as an early warning system for minimizing food safety (FS) breaches, and it functions in conjunction with existing FS measures. Essentially, the function of FS and FSS measures can be visualized in two parts: (i) the FS preventive measures as actions taken at the stem level, and (ii) the FSS interventions as actions taken at the root level, to enhance the impact of the implemented safety steps. In practice, along with FS, FSS also draws its support from (i) legislative directives and regulatory measures for enforcing verifiable, timely, and effective compliance; (ii) measurement systems in place for sustained quality assurance; and (iii) shared responsibility to ensure cohesion among all the stakeholders namely, policy makers, regulators, food producers, processors and distributors, and consumers. However, the functional framework of FSS differs from that of FS by way of: (i) retooling the vulnerable segments of the preventive features of existing FS measures; (ii) fine-tuning response systems to efficiently preempt the FS breaches; (iii) building a long-term nutrient and toxicant surveillance network based on validated measurement systems functioning in real time; (iv) focusing on crisp, clear, and correct communication that resonates among all the stakeholders; and (v) developing inter-disciplinary human resources to meet ever-increasing FS challenges. Important determinants of FSS include: (i) strengthening international dialogue for refining regulatory reforms and addressing emerging risks; (ii) developing innovative and strategic action points for intervention {in addition to Hazard Analysis and Critical Control Points (HACCP) procedures]; and (iii) introducing additional science-based tools such as metrology-based measurement systems.

Comparison of results of experimental research with numerical calculations of a model one-sided seal

NASA Astrophysics Data System (ADS)

Joachimiak, Damian; Krzyślak, Piotr

2015-06-01

Paper presents the results of experimental and numerical research of a model segment of a labyrinth seal for a different wear level. The analysis covers the extent of leakage and distribution of static pressure in the seal chambers and the planes upstream and downstream of the segment. The measurement data have been compared with the results of numerical calculations obtained using commercial software. Based on the flow conditions occurring in the area subjected to calculations, the size of the mesh defined by parameter y+ has been analyzed and the selection of the turbulence model has been described. The numerical calculations were based on the measurable thermodynamic parameters in the seal segments of steam turbines. The work contains a comparison of the mass flow and distribution of static pressure in the seal chambers obtained during the measurement and calculated numerically in a model segment of the seal of different level of wear.

Rail inspection system based on iGPS

NASA Astrophysics Data System (ADS)

Fu, Xiaoyan; Wang, Mulan; Wen, Xiuping

2018-05-01

Track parameters include gauge, super elevation, cross level and so on, which could be calculated through the three-dimensional coordinates of the track. The rail inspection system based on iGPS (indoor/infrared GPS) was composed of base station, receiver, rail inspection frame, wireless communication unit, display and control unit and data processing unit. With the continuous movement of the inspection frame, the system could accurately inspect the coordinates of rail; realize the intelligent detection and precision measurement. According to principle of angle intersection measurement, the inspection model was structured, and detection process was given.

ASSOCIATION OF URINARY PERCHLORATE WITH INDIRECT MEASURES OFTHYROID DYSFUNCTION BASED ON NHANES 2001-2002

EPA Science Inventory

Background/Aims: Perchlorate is a widespread environmental pollutant. Previous population studies based on the National Health and Nutrition Examination Survey (NHANES) 2001-2002, showed that urinary perchlorate concentrations were associated with increased levels of thyroid stim...

Radiative lifetimes in B I using ultraviolet and vacuum-ultraviolet laser-induced fluorescence

NASA Technical Reports Server (NTRS)

O'Brian, T. R.; Lawler, J. E.

1992-01-01

Radiative lifetimes of the eight lowest even parity levels in the doublet system of B I are measured using time-resolved laser-induced fluorescence in the UV and VUV on an atomic beam of boron. The accurate lifetimes provide a base for improved determination of absolute transition probabilities in B I. The techniques described are broadly applicable to measurement of lifetimes of levels with transitions in the visible, UV, and VUV in almost any element.

LARVAL SALAMANDER GROWTH RESPONDS TO ENRICHMENT OF A NUTRIENT POOR HEADWATER STREAM

EPA Science Inventory

While many studies have measured effects of nutrient enrichment on higher trophic levels in grazing food webs, few such studies exist for detritus-based systems. We measured effects of nitrogen and phosphorus addition on growth of larval Eruycea wilderae in a heterotrophic head...

Automated tracking of lava lake level using thermal images at Kīlauea Volcano, Hawai’i

USGS Publications Warehouse

Patrick, Matthew R.; Swanson, Don; Orr, Tim R.

2016-01-01

Tracking the level of the lava lake in Halema‘uma‘u Crater, at the summit of Kīlauea Volcano, Hawai’i, is an essential part of monitoring the ongoing eruption and forecasting potentially hazardous changes in activity. We describe a simple automated image processing routine that analyzes continuously-acquired thermal images of the lava lake and measures lava level. The method uses three image segmentation approaches, based on edge detection, short-term change analysis, and composite temperature thresholding, to identify and track the lake margin in the images. These relative measurements from the images are periodically calibrated with laser rangefinder measurements to produce real-time estimates of lake elevation. Continuous, automated tracking of the lava level has been an important tool used by the U.S. Geological Survey’s Hawaiian Volcano Observatory since 2012 in real-time operational monitoring of the volcano and its hazard potential.

[Influence of an observer in the haemolysis produced during the extraction of blood samples in primary care].

PubMed

Bel-Peña, N; Mérida-de la Torre, F J

2015-01-01

To check whether an intervention based on direct observation and complementary information to nurses helps reduce haemolysis when drawing blood specimens. Random sampling study in primary care centres in the serrania de Málaga health management area, using a cross-sectional, longitudinal pre- and post-intervention design. The study period was from August 2012 to January 2015. The level of free haemoglobin was measured by direct spectrophotometry in the specimens extracted. It was then checked whether the intervention influenced the level of haemolysis, and if this was maintained over time. The mean haemolysis measured pre-intervention was 17%, and after intervention it was 6.1%. A year later and under the same conditions, the frequency of haemolysis was measured again the samples analysed, and the percentage was 9% These results are low when compared to the level obtained pre-intervention, but are higher when compared to the levels obtained immediately after the intervention. The transport and analysis conditions were the same. An intervention based on a direct and informative observation in the process of collecting blood samples contributes significantly to reduce the level of haemolysis. This effect is maintained in time. This intervention needs to be repeated to maintain its effectiveness. Audits and continuing education programs are useful for quality assurance procedures, and maintain the level of care needed for a good quality of care. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Advanced Engineering Technology for Measuring Performance.

PubMed

Rutherford, Drew N; D'Angelo, Anne-Lise D; Law, Katherine E; Pugh, Carla M

2015-08-01

The demand for competency-based assessments in surgical training is growing. Use of advanced engineering technology for clinical skills assessment allows for objective measures of hands-on performance. Clinical performance can be assessed in several ways via quantification of an assessee's hand movements (motion tracking), direction of visual attention (eye tracking), levels of stress (physiologic marker measurements), and location and pressure of palpation (force measurements). Innovations in video recording technology and qualitative analysis tools allow for a combination of observer- and technology-based assessments. Overall the goal is to create better assessments of surgical performance with robust validity evidence. Copyright © 2015 Elsevier Inc. All rights reserved.

Infrared and visible image fusion scheme based on NSCT and low-level visual features

NASA Astrophysics Data System (ADS)

Li, Huafeng; Qiu, Hongmei; Yu, Zhengtao; Zhang, Yafei

2016-05-01

Multi-scale transform (MST) is an efficient tool for image fusion. Recently, many fusion methods have been developed based on different MSTs, and they have shown potential application in many fields. In this paper, we propose an effective infrared and visible image fusion scheme in nonsubsampled contourlet transform (NSCT) domain, in which the NSCT is firstly employed to decompose each of the source images into a series of high frequency subbands and one low frequency subband. To improve the fusion performance we designed two new activity measures for fusion of the lowpass subbands and the highpass subbands. These measures are developed based on the fact that the human visual system (HVS) percept the image quality mainly according to its some low-level features. Then, the selection principles of different subbands are presented based on the corresponding activity measures. Finally, the merged subbands are constructed according to the selection principles, and the final fused image is produced by applying the inverse NSCT on these merged subbands. Experimental results demonstrate the effectiveness and superiority of the proposed method over the state-of-the-art fusion methods in terms of both visual effect and objective evaluation results.

Clinically Relevant Outcome Measures Following Limb Osseointegration; Systematic Review of the Literature.

PubMed

Al Muderis, Munjed M; Lu, William Y; Li, Jiao Jiao; Kaufman, Kenton; Orendurff, Michael; Highsmith, M Jason; Lunseth, Paul A; Kahle, Jason T

2018-02-01

The current standard of care for an amputee is a socket-based prostheses. An osseointegrated implant (OI) is an alternative for prosthetic attachment. Osseointegration addresses reported problems related to wearing a socket interface, such as skin issues, discomfort, diminished function, quality of life, prosthetic use, and abandonment. The purpose of this report is to systematically review current literature regarding OI to identify and categorize the reported clinically relevant outcome measures, rate the quality of available evidence, and synthesize the findings. A multidisciplinary team used PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) methods. Search methodology was based on identifying clinically relevant articles. Three databases were searched: PubMed, CINAHL, and Web of Science. Clinical studies with aggregated data reporting at least 1 clinically relevant outcome measure were included. The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) criterion was used for critical appraisal and recommendations. This review identified 21 clinically relevant observational studies. Outcome measures were categorized into the following 9 categories: vibratory stimulation, complications, biomechanics, economics, patient-reported outcome measures, electromyography, x-ray, physical functional performance, and energy consumption. This systematic review consisted of Level III and IV observational studies. Homogeneous outcome measures with strong psychometric properties across prospective studies do not exist to date. Higher-level, prospective, randomized, long-term, clinically relevant trials are needed to prove efficacy of OI compared with socket prosthetic attachment. Osseointegration was at least equivalent to sockets in most studies. In some cases, it was superior. Osseointegration represents a promising alternative to socket prosthetic attachments for extremity amputees. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Statistical modeling of occupational chlorinated solvent exposures for case–control studies using a literature-based database

PubMed Central

Hein, Misty J.; Waters, Martha A.; Ruder, Avima M.; Stenzel, Mark R.; Blair, Aaron; Stewart, Patricia A.

2010-01-01

Objectives: Occupational exposure assessment for population-based case–control studies is challenging due to the wide variety of industries and occupations encountered by study participants. We developed and evaluated statistical models to estimate the intensity of exposure to three chlorinated solvents—methylene chloride, 1,1,1-trichloroethane, and trichloroethylene—using a database of air measurement data and associated exposure determinants. Methods: A measurement database was developed after an extensive review of the published industrial hygiene literature. The database of nearly 3000 measurements or summary measurements included sample size, measurement characteristics (year, duration, and type), and several potential exposure determinants associated with the measurements: mechanism of release (e.g. evaporation), process condition, temperature, usage rate, type of ventilation, location, presence of a confined space, and proximity to the source. The natural log-transformed measurement levels in the exposure database were modeled as a function of the measurement characteristics and exposure determinants using maximum likelihood methods. Assuming a single lognormal distribution of the measurements, an arithmetic mean exposure intensity level was estimated for each unique combination of exposure determinants and decade. Results: The proportions of variability in the measurement data explained by the modeled measurement characteristics and exposure determinants were 36, 38, and 54% for methylene chloride, 1,1,1-trichloroethane, and trichloroethylene, respectively. Model parameter estimates for the exposure determinants were in the anticipated direction. Exposure intensity estimates were plausible and exhibited internal consistency, but the ability to evaluate validity was limited. Conclusions: These prediction models can be used to estimate chlorinated solvent exposure intensity for jobs reported by population-based case–control study participants that have sufficiently detailed information regarding the exposure determinants. PMID:20418277

Active-passive measurements and CFD based modelling for indoor radon dispersion study.

PubMed

Chauhan, Neetika; Chauhan, R P

2015-06-01

Computational fluid dynamics (CFD) play a significant role in indoor pollutant dispersion study. Radon is an indoor pollutant which is radioactive and inert gas in nature. The concentration level and spatial distribution of radon may be affected by the dwelling's ventilation conditions. Present work focus at the study of indoor radon gas distribution via measurement and CFD modeling in naturally ventilated living room. The need of the study is the prediction of activity level and to study the effect of natural ventilation on indoor radon. Two measurement techniques (Passive measurement using pin-hole dosimeters and active measurement using continuous radon monitor (SRM)) were used for the validation purpose of CFD results. The CFD simulation results were compared with the measurement results at 15 points, 3 XY planes at different heights along with the volumetric average concentration. The simulation results found to be comparable with the measurement results. The future scope of these CFD codes is to study the effect of varying inflow rate of air on the radon concentration level and dispersion pattern. Copyright © 2015 Elsevier Ltd. All rights reserved.

Absolute Steady-State Thermal Conductivity Measurements by Use of a Transient Hot-Wire System.

PubMed

Roder, H M; Perkins, R A; Laesecke, A; Nieto de Castro, C A

2000-01-01

A transient hot-wire apparatus was used to measure the thermal conductivity of argon with both steady-state and transient methods. The effects of wire diameter, eccentricity of the wire in the cavity, axial conduction, and natural convection were accounted for in the analysis of the steady-state measurements. Based on measurements on argon, the relative uncertainty at the 95 % level of confidence of the new steady-state measurements is 2 % at low densities. Using the same hot wires, the relative uncertainty of the transient measurements is 1 % at the 95 % level of confidence. This is the first report of thermal conductivity measurements made by two different methods in the same apparatus. The steady-state method is shown to complement normal transient measurements at low densities, particularly for fluids where the thermophysical properties at low densities are not known with high accuracy.

Digital tooth-based superimposition method for assessment of alveolar bone levels on cone-beam computed tomography images.

PubMed

Romero-Delmastro, Alejandro; Kadioglu, Onur; Currier, G Frans; Cook, Tanner

2014-08-01

Cone-beam computed tomography images have been previously used for evaluation of alveolar bone levels around teeth before, during, and after orthodontic treatment. Protocols described in the literature have been vague, have used unstable landmarks, or have required several software programs, file conversions, or hand tracings, among other factors that could compromise the precision of the measurements. The purposes of this article are to describe a totally digital tooth-based superimposition method for the quantitative assessment of alveolar bone levels and to evaluate its reliability. Ultra cone-beam computed tomography images (0.1-mm reconstruction) from 10 subjects were obtained from the data pool of the University of Oklahoma; 80 premolars were measured twice by the same examiner and a third time by a second examiner to determine alveolar bone heights and thicknesses before and more than 6 months after orthodontic treatment using OsiriX (version 3.5.1; Pixeo, Geneva, Switzerland). Intraexaminer and interexaminer reliabilities were evaluated, and Dahlberg's formula was used to calculate the error of the measurements. Cross-sectional and longitudinal evaluations of alveolar bone levels were possible using a digital tooth-based superimposition method. The mean differences for buccal alveolar crest heights and thicknesses were below 0.10 mm for the same examiner and below 0.17 mm for all examiners. The ranges of errors for any measurement were between 0.02 and 0.23 mm for intraexaminer errors, and between 0.06 and 0.29 mm for interexaminer errors. This protocol can be used for cross-sectional or longitudinal assessment of alveolar bone levels with low interexaminer and intraexaminer errors, and it eliminates the use of less reliable or less stable landmarks and the need for multiple software programs and image printouts. Standardization of the methods for bone assessment in orthodontics is necessary; this method could be the answer to this need. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Cloud field classification based on textural features

NASA Technical Reports Server (NTRS)

Sengupta, Sailes Kumar

1989-01-01

An essential component in global climate research is accurate cloud cover and type determination. Of the two approaches to texture-based classification (statistical and textural), only the former is effective in the classification of natural scenes such as land, ocean, and atmosphere. In the statistical approach that was adopted, parameters characterizing the stochastic properties of the spatial distribution of grey levels in an image are estimated and then used as features for cloud classification. Two types of textural measures were used. One is based on the distribution of the grey level difference vector (GLDV), and the other on a set of textural features derived from the MaxMin cooccurrence matrix (MMCM). The GLDV method looks at the difference D of grey levels at pixels separated by a horizontal distance d and computes several statistics based on this distribution. These are then used as features in subsequent classification. The MaxMin tectural features on the other hand are based on the MMCM, a matrix whose (I,J)th entry give the relative frequency of occurrences of the grey level pair (I,J) that are consecutive and thresholded local extremes separated by a given pixel distance d. Textural measures are then computed based on this matrix in much the same manner as is done in texture computation using the grey level cooccurrence matrix. The database consists of 37 cloud field scenes from LANDSAT imagery using a near IR visible channel. The classification algorithm used is the well known Stepwise Discriminant Analysis. The overall accuracy was estimated by the percentage or correct classifications in each case. It turns out that both types of classifiers, at their best combination of features, and at any given spatial resolution give approximately the same classification accuracy. A neural network based classifier with a feed forward architecture and a back propagation training algorithm is used to increase the classification accuracy, using these two classes of features. Preliminary results based on the GLDV textural features alone look promising.

Treatment of Electronic Energy Level Transition and Ionization Following the Particle-Based Chemistry Model

NASA Technical Reports Server (NTRS)

Liechty, Derek S.; Lewis, Mark

2010-01-01

A new method of treating electronic energy level transitions as well as linking ionization to electronic energy levels is proposed following the particle-based chemistry model of Bird. Although the use of electronic energy levels and ionization reactions in DSMC are not new ideas, the current method of selecting what level to transition to, how to reproduce transition rates, and the linking of the electronic energy levels to ionization are, to the author s knowledge, novel concepts. The resulting equilibrium temperatures are shown to remain constant, and the electronic energy level distributions are shown to reproduce the Boltzmann distribution. The electronic energy level transition rates and ionization rates due to electron impacts are shown to reproduce theoretical and measured rates. The rates due to heavy particle impacts, while not as favorable as the electron impact rates, compare favorably to values from the literature. Thus, these new extensions to the particle-based chemistry model of Bird provide an accurate method for predicting electronic energy level transition and ionization rates in gases.