Study Abroad Program Design, Personal Development and Intercultural Effectiveness

ERIC Educational Resources Information Center

Wiedenhoeft, Margaret Davis

2011-01-01

Research on study abroad focuses on the development of learning outcomes and assessment (Bolen, 2007) or program design, such as level of integration with local student population, housing situation, and level of interaction with host culture (Brecht & Robinson, 1993; Engle & Engle, 2004; Georgetown Consortium Research Project, n.d.;…

Bayesian enhancement two-stage design for single-arm phase II clinical trials with binary and time-to-event endpoints.

PubMed

Shi, Haolun; Yin, Guosheng

2018-02-21

Simon's two-stage design is one of the most commonly used methods in phase II clinical trials with binary endpoints. The design tests the null hypothesis that the response rate is less than an uninteresting level, versus the alternative hypothesis that the response rate is greater than a desirable target level. From a Bayesian perspective, we compute the posterior probabilities of the null and alternative hypotheses given that a promising result is declared in Simon's design. Our study reveals that because the frequentist hypothesis testing framework places its focus on the null hypothesis, a potentially efficacious treatment identified by rejecting the null under Simon's design could have only less than 10% posterior probability of attaining the desirable target level. Due to the indifference region between the null and alternative, rejecting the null does not necessarily mean that the drug achieves the desirable response level. To clarify such ambiguity, we propose a Bayesian enhancement two-stage (BET) design, which guarantees a high posterior probability of the response rate reaching the target level, while allowing for early termination and sample size saving in case that the drug's response rate is smaller than the clinically uninteresting level. Moreover, the BET design can be naturally adapted to accommodate survival endpoints. We conduct extensive simulation studies to examine the empirical performance of our design and present two trial examples as applications. © 2018, The International Biometric Society.

The impact of user centered design on student motivation

NASA Astrophysics Data System (ADS)

Locker, Craig T.

There is a current push for STEM education within the U.S.; however current studies show that students' interest to pursue STEM fields is decreasing as they progress through high school. This lose in interest has shown to have a strong tie to students' perceived levels of motivation towards the subject. The question that this studied set out to answer was if user centered design (UCD) would affect students perceived level of motivation. For this study a treatment of UCD was compared to a traditional high school engineering design curriculum, with the goal to identify if UCD would have a positive effect on the students perceived level of motivation. 59 9th grade high school students from an urban Midwestern city were selected to participate. Students were given a pre and posttest to determine their levels of motivation before and after the comparison or treatment. Analysis showed that students perceived level of intrinsic and extrinsic motivation significantly went up in the treatment group. The study concluded that due to the ease of implementation and low cost of deployment that UCD should be introduced into high school design challenges that focus on developing a solution for an external stakeholder.

The effects of design details on cost and weight of fuselage structures

NASA Technical Reports Server (NTRS)

Swanson, G. D.; Metschan, S. L.; Morris, M. R.; Kassapoglou, C.

1993-01-01

Crown panel design studies showing the relationship between panel size, cost, weight, and aircraft configuration are compared to aluminum design configurations. The effects of a stiffened sandwich design concept are also discussed. This paper summarizes the effect of a design cost model in assessing the cost and weight relationships for fuselage crown panel designs. Studies were performed using data from existing aircraft to assess the effects of different design variables on the cost and weight of transport fuselage crown panel design. Results show a strong influence of load levels, panel size, and material choices on the cost and weight of specific designs. A design tool being developed under the NASA ACT program is used in the study to assess these issues. The effects of panel configuration comparing postbuckled and buckle resistant stiffened laminated structure is compared to a stiffened sandwich concept. Results suggest some potential economy with stiffened sandwich designs for compression dominated structure with relatively high load levels.

A Design Model of Distributed Scaffolding for Inquiry-Based Learning

ERIC Educational Resources Information Center

Hsu, Ying-Shao; Lai, Ting-Ling; Hsu, Wei-Hsiu

2015-01-01

This study presents a series of three experiments that focus on how distributed scaffolding influences learners' conceptual understanding and reasoning from combined levels of triangulation, at the interactive level (discourses within a focus group) and the collective level (class). Three inquiry lessons on plate tectonics (LPT) were designed,…

A parametric study of motor starting for a 2- to 10-kilowatt Brayton power system

NASA Technical Reports Server (NTRS)

Cantoni, D. A.

1971-01-01

A study of the motor starting of a Brayton cycle power system was conducted to provide estimates of system sensitivity to several controllable parameters. These sensitivity estimates were used as a basis for selection of an optimum motor-start scheme to be implemented on the 2- to 10-kilowatt Brayton power system designed and presently under test. The studies were conducted with an analog simulation of the Brayton power system and covered a range of frequencies from 400 Hz (33 percent design) to 1200 Hz (design), voltage-to-frequency ratios of 0.050 (50 percent design) to 0.100 (design), turbine-inlet temperatures of 800 K (1440 R, 70 percent design) to 1140 K (2060 deg R, design), and prestart pressure levels of 14.5 psia to 29.0 psia. These studies have shown the effect of selected system variables on motor starting. The final selection of motor-start variables can therefore be made on the basis of motor-start inverter complexity, battery size and weight, desired steady-state pressure level after startup, and other operational limitations. In general, the study showed the time required for motor starting to be inversely proportional to motor frequency, voltage, turbine-inlet temperature, and pressure level. An increase in any of these parameters decreases startup time.

Load Transfer Characteristics of Various Designs of Three-Implant-Retained Mandibular Overdentures.

PubMed

Tokar, Emre; Uludag, Bulent

2015-01-01

Many different attachment systems (eg, bars, studs, magnets, telescopic copings) have been used to retain overdentures. The current study aimed to investigate the load transfer characteristics and to compare the stress levels of four attachment designs for mandibular overdentures retained by one central implant and two inclined distal implants. Photoelastic mandibular models fabricated with three screw-type implants (Tapered Screw-Vent, 3.75 × 13 mm) were placed in the parasymphyseal area. The center implant was vertically oriented to the midline, and the other implants were embedded in the canine areas with a 20-degree angulation relative to the center implant. Four overdentures with different attachment designs (bar, bar/ball, bar/distally placed Rk-1s, and Locators) were studied in the context of this model. Vertical loads (100 N) were applied to the central fossa of the right first molar area of each overdenture. Stress levels that developed in the denture-bearing areas and around the implants were observed photoelastically and evaluated visually. The studied attachment designs showed low and moderate stress levels. The greatest stress was found with the bar/ball design, while the lowest stress levels were observed with the Locator attachment design. Stresses were concentrated on the loaded side for each design. All tested designs experienced moderate stress around the posterior edentulous area. None of the designs experienced more than moderate stress. The lowest stress was noted with the Locator attachments, which transmitted little discernible stress around the implants.

Intra-class correlation estimates for assessment of vitamin A intake in children.

PubMed

Agarwal, Girdhar G; Awasthi, Shally; Walter, Stephen D

2005-03-01

In many community-based surveys, multi-level sampling is inherent in the design. In the design of these studies, especially to calculate the appropriate sample size, investigators need good estimates of intra-class correlation coefficient (ICC), along with the cluster size, to adjust for variation inflation due to clustering at each level. The present study used data on the assessment of clinical vitamin A deficiency and intake of vitamin A-rich food in children in a district in India. For the survey, 16 households were sampled from 200 villages nested within eight randomly-selected blocks of the district. ICCs and components of variances were estimated from a three-level hierarchical random effects analysis of variance model. Estimates of ICCs and variance components were obtained at village and block levels. Between-cluster variation was evident at each level of clustering. In these estimates, ICCs were inversely related to cluster size, but the design effect could be substantial for large clusters. At the block level, most ICC estimates were below 0.07. At the village level, many ICC estimates ranged from 0.014 to 0.45. These estimates may provide useful information for the design of epidemiological studies in which the sampled (or allocated) units range in size from households to large administrative zones.

Generalized Subset Designs in Analytical Chemistry.

PubMed

Surowiec, Izabella; Vikström, Ludvig; Hector, Gustaf; Johansson, Erik; Vikström, Conny; Trygg, Johan

2017-06-20

Design of experiments (DOE) is an established methodology in research, development, manufacturing, and production for screening, optimization, and robustness testing. Two-level fractional factorial designs remain the preferred approach due to high information content while keeping the number of experiments low. These types of designs, however, have never been extended to a generalized multilevel reduced design type that would be capable to include both qualitative and quantitative factors. In this Article we describe a novel generalized fractional factorial design. In addition, it also provides complementary and balanced subdesigns analogous to a fold-over in two-level reduced factorial designs. We demonstrate how this design type can be applied with good results in three different applications in analytical chemistry including (a) multivariate calibration using microwave resonance spectroscopy for the determination of water in tablets, (b) stability study in drug product development, and (c) representative sample selection in clinical studies. This demonstrates the potential of generalized fractional factorial designs to be applied in many other areas of analytical chemistry where representative, balanced, and complementary subsets are required, especially when a combination of quantitative and qualitative factors at multiple levels exists.

Integrating Technology into Classroom: The Learner-Centered Instructional Design

ERIC Educational Resources Information Center

Sezer, Baris; Karaoglan Yilmaz, Fatma Gizem; Yilmaz, Ramazan

2013-01-01

In this study, to present an instructional model by considering the existing models of instructional design (ARCS, ADDIE, ASSURE, Dick and Carey, Seels and Glasgow, Smith and Ragan etc.) with the nature of technology-based education and to reveal analysis, design, development, implementation, evaluation, and to revise levels with lower levels of…

Estimation of a Nonlinear Intervention Phase Trajectory for Multiple-Baseline Design Data

ERIC Educational Resources Information Center

Hembry, Ian; Bunuan, Rommel; Beretvas, S. Natasha; Ferron, John M.; Van den Noortgate, Wim

2015-01-01

A multilevel logistic model for estimating a nonlinear trajectory in a multiple-baseline design is introduced. The model is applied to data from a real multiple-baseline design study to demonstrate interpretation of relevant parameters. A simple change-in-levels (?"Levels") model and a model involving a quadratic function…

Shape design of an optimal comfortable pillow based on the analytic hierarchy process method

PubMed Central

Liu, Shuo-Fang; Lee, Yann-Long; Liang, Jung-Chin

2011-01-01

Objective Few studies have analyzed the shapes of pillows. The purpose of this study was to investigate the relationship between the pillow shape design and subjective comfort level for asymptomatic subjects. Methods Four basic pillow designs factors were selected on the basis of literature review and recombined into 8 configurations for testing the rank of degrees of comfort. The data were analyzed by the analytic hierarchy process method to determine the most comfortable pillow. Results Pillow number 4 was the most comfortable pillow in terms of head, neck, shoulder, height, and overall comfort. The design factors of pillow number 4 were using a combination of standard, cervical, and shoulder pillows. A prototype of this pillow was developed on the basis of the study results for designing future pillow shapes. Conclusions This study investigated the comfort level of particular users and redesign features of a pillow. A deconstruction analysis would simplify the process of determining the most comfortable pillow design and aid designers in designing pillows for groups. PMID:22654680

The fractionated dipole antenna: A new antenna for body imaging at 7 Tesla.

PubMed

Raaijmakers, Alexander J E; Italiaander, Michel; Voogt, Ingmar J; Luijten, Peter R; Hoogduin, Johannes M; Klomp, Dennis W J; van den Berg, Cornelis A T

2016-03-01

Dipole antennas in ultrahigh field MRI have demonstrated advantages over more conventional designs. In this study, the fractionated dipole antenna is presented: a dipole where the legs are split into segments that are interconnected by capacitors or inductors. A parameter study has been performed on dipole antenna length using numerical simulations. A subsequent simulation study investigates the optimal intersegment capacitor/inductor value. The resulting optimal design has been constructed and compared to a previous design, the single-side adapted dipole (SSAD) by simulations and measurements. An array of eight elements has been constructed for prostate imaging on four subjects (body mass index 20-27.5) using 8 × 2 kW amplifiers. For prostate imaging at 7T, lowest peak local specific-absorption rate (SAR) levels are achieved if the antenna is 30 cm or longer. A fractionated dipole antenna design with inductors between segments has been chosen to achieve even lower SAR levels and more homogeneous receive sensitivities. With the new design, good quality prostate images are acquired. SAR levels are reduced by 41% to 63% in comparison to the SSAD. Coupling levels are moderate (average nearest neighbor: -14.6 dB) for each subject and prostate B1+ levels range from 12 to 18 μT. © 2015 Wiley Periodicals, Inc.

Study on effects of E-glass fiber hybrid composites enhanced with multi-walled carbon nanotubes under tensile load using full factorial design of experiments

NASA Astrophysics Data System (ADS)

Musthak, Md.; Madhavi, M.; Ahsanullah, F. M.

2017-08-01

Carbon nanotubes (CNT's) are attracting scientific and industrial interest by virtue of their outstanding characteristics. The present research problem deals with the fabrication and characterization of E-glass fiber composites enhanced by carbon nanotubes. In the present study, three factors with two levels are considered. Hence, the design is called 23 full factorial design of experiment. The process parameters considered for the present problem are weight of multi-walled carbon nanotubes, process to disperse nano-particles in resin, and orientation of woven fabric. In addition, their levels considered for the experiment are higher level (+1) and lower level (-1). Fabrication of E-glass fiber composites was carried out according to design, and the specimens were prepared with respect to the ASTM standards D3039-76 and tensile testing was performed. The results show that the nano-particulated composite plate can be manufactured by considering lower level nano-particles stirred with probe sonicator and plied-up with hybrid orientation.

Fixed-Order Mixed Norm Designs for Building Vibration Control

NASA Technical Reports Server (NTRS)

Whorton, Mark S.; Calise, Anthony J.

2000-01-01

This study investigates the use of H2, mu-synthesis, and mixed H2/mu methods to construct full order controllers and optimized controllers of fixed dimensions. The benchmark problem definition is first extended to include uncertainty within the controller bandwidth in the form of parametric uncertainty representative of uncertainty in the natural frequencies of the design model. The sensitivity of H2 design to unmodeled dynamics and parametric uncertainty is evaluated for a range of controller levels of authority. Next, mu-synthesis methods are applied to design full order compensators that are robust to both unmodeled dynamics and to parametric uncertainty. Finally, a set of mixed H2/mu compensators are designed which are optimized for a fixed compensator dimension. These mixed norm designs recover the H2 design performance levels while providing the same levels of robust stability as the mu designs. It is shown that designing with the mixed norm approach permits higher levels of controller authority for which the H2 designs are destabilizing. The benchmark problem is that of an active tendon system. The controller designs are all based on the use of acceleration feedback.

Effect of Direct Teaching Method on the Academic Achievement of High and Low Achievers in the Subject of English at the Secondary Level

ERIC Educational Resources Information Center

Hussain, Ishtiaq; Hamdani, Syed Nisar Hussain; Quraishi, Uzma; Zeeshan, Muhammad

2010-01-01

The major objective of the study was to determine the role of the direct teaching method in the academic achievement of students in English at the secondary level. To achieve the said objective, the Solomon Four-Design pre-test/post-test equivalent group design was considered to be the most useful design for this study. The pre-test was used to…

The Application of an Engineering Design and Information Systems Case Study in a Senior Level Product Data Management Course

ERIC Educational Resources Information Center

Connolly, Patrick

2011-01-01

This study examines the use of an engineering design and information systems case study over a three week period in a senior level class covering the topics of product data management (PDM) and product lifecycle management (PLM). Students that have taken the course in the past have struggled with the sometimes nebulous and difficult to…

Assessment and control design for steam vent noise in an oil refinery.

PubMed

Monazzam, Mohammad Reza; Golmohammadi, Rostam; Nourollahi, Maryam; Momen Bellah Fard, Samaneh

2011-06-13

Noise is one of the most important harmful agents in work environment. Noise pollution in oil refinery industries is related to workers' health. This study aimed to determine the overall noise pollution of an oil refinery operation and its frequency analysis to determine the control plan for a vent noise in these industries. This experimental study performed in control unit of Tehran Oil Refinery in 2008. To determine the noise distributions, environmental noise measurements were carried out by lattice method according to basic information and technical process. The sound pressure level and frequency distribution was measured for each study sources subject separately was performed individually. According to the vent's specification, the measured steam noise characteristics reviewed and compared to the theoretical results of steam noise estimation. Eventually, a double expansion muffler was designed. Data analysis and graphical design were carried out using Excel software. The results of environmental noise measurements indicated that the level of sound pressure was above the national permitted level (85 dB (A)). The Mean level of sound pressure of the studied steam jet was 90.3 dB (L). The results of noise frequency analysis for the steam vents showed that the dominant frequency was 4000 Hz. To obtain 17 dB noise reductions, a double chamber aluminum muffler with 500 mm length and 200 mm diameter consisting pipe drilled was designed. The characteristics of steam vent noise were separated from other sources, a double expansion muffler was designed using a new method based on the level of steam noise, and principle sound frequency, a double expansion muffler was designed.

33 CFR 220.1 - Low level discharge facilities for drawdown of impoundments.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Feasibility (survey) reports and subsequent pertinent design memoranda should include the results of studies..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DESIGN CRITERIA FOR DAM AND LAKE PROJECTS § 220.1 Low level... responsibility for design of Civil Works projects. (c) Policy. It is the policy of the Chief of Engineers that...

33 CFR 220.1 - Low level discharge facilities for drawdown of impoundments.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Feasibility (survey) reports and subsequent pertinent design memoranda should include the results of studies..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DESIGN CRITERIA FOR DAM AND LAKE PROJECTS § 220.1 Low level... responsibility for design of Civil Works projects. (c) Policy. It is the policy of the Chief of Engineers that...

33 CFR 220.1 - Low level discharge facilities for drawdown of impoundments.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Feasibility (survey) reports and subsequent pertinent design memoranda should include the results of studies..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DESIGN CRITERIA FOR DAM AND LAKE PROJECTS § 220.1 Low level... responsibility for design of Civil Works projects. (c) Policy. It is the policy of the Chief of Engineers that...

33 CFR 220.1 - Low level discharge facilities for drawdown of impoundments.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Feasibility (survey) reports and subsequent pertinent design memoranda should include the results of studies..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DESIGN CRITERIA FOR DAM AND LAKE PROJECTS § 220.1 Low level... responsibility for design of Civil Works projects. (c) Policy. It is the policy of the Chief of Engineers that...

Evaluating an Organizational-Level Occupational Health Intervention in a Combined Regression Discontinuity and Randomized Control Design.

PubMed

Sørensen, By Ole H

2016-10-01

Organizational-level occupational health interventions have great potential to improve employees' health and well-being. However, they often compare unfavourably to individual-level interventions. This calls for improving methods for designing, implementing and evaluating organizational interventions. This paper presents and discusses the regression discontinuity design because, like the randomized control trial, it is a strong summative experimental design, but it typically fits organizational-level interventions better. The paper explores advantages and disadvantages of a regression discontinuity design with an embedded randomized control trial. It provides an example from an intervention study focusing on reducing sickness absence in 196 preschools. The paper demonstrates that such a design fits the organizational context, because it allows management to focus on organizations or workgroups with the most salient problems. In addition, organizations may accept an embedded randomized design because the organizations or groups with most salient needs receive obligatory treatment as part of the regression discontinuity design. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Levels and Functions of HIV/AIDS Stigma within the Iranian Community Living in the Sydney Metropolitan Area

ERIC Educational Resources Information Center

Hosseinzadeh, Hassan; Hossain, Syeda Zakia; Niknami, Shamsaddin

2012-01-01

Objective: This study examines the levels of human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS) related stigma among the Iranian population and the factors that contribute to the formation of stigma within the study population. Design: A quantitative research design was used in this research whereby participants completed…

An evaluation of study design for estimating a time-of-day noise weighting

NASA Technical Reports Server (NTRS)

Fields, J. M.

1986-01-01

The relative importance of daytime and nighttime noise of the same noise level is represented by a time-of-day weight in noise annoyance models. The high correlations between daytime and nighttime noise were regarded as a major reason that previous social surveys of noise annoyance could not accurately estimate the value of the time-of-day weight. Study designs which would reduce the correlation between daytime and nighttime noise are described. It is concluded that designs based on short term variations in nighttime noise levels would not be able to provide valid measures of response to nighttime noise. The accuracy of the estimate of the time-of-day weight is predicted for designs which are based on long term variations in nighttime noise levels. For these designs it is predicted that it is not possible to form satisfactorily precise estimates of the time-of-day weighting.

Modeling false positive detections in species occurrence data under different study designs.

PubMed

Chambert, Thierry; Miller, David A W; Nichols, James D

2015-02-01

The occurrence of false positive detections in presence-absence data, even when they occur infrequently, can lead to severe bias when estimating species occupancy patterns. Building upon previous efforts to account for this source of observational error, we established a general framework to model false positives in occupancy studies and extend existing modeling approaches to encompass a broader range of sampling designs. Specifically, we identified three common sampling designs that are likely to cover most scenarios encountered by researchers. The different designs all included ambiguous detections, as well as some known-truth data, but their modeling differed in the level of the model hierarchy at which the known-truth information was incorporated (site level or observation level). For each model, we provide the likelihood, as well as R and BUGS code needed for implementation. We also establish a clear terminology and provide guidance to help choosing the most appropriate design and modeling approach.

Applying a Conceptual Design Framework to Study Teachers' Use of Educational Technology

ERIC Educational Resources Information Center

Holmberg, Jörgen

2017-01-01

Theoretical outcomes of design-based research (DBR) are often presented in the form of local theory design principles. This article suggests a complementary theoretical construction in DBR, in the form of a "design framework" at a higher abstract level, to study and inform educational design with ICT in different situated contexts.…

Preliminary design of the cryogenic cooled limb scanning interferometer radiometer (CLIR)

NASA Technical Reports Server (NTRS)

Sherman, A.

1978-01-01

The preliminary design of the cryogenic cooling system for the Cryogenic Cooled Limb Scanning Interferometer Radiometer (CLIR) instrument to be flown on the Atmospheric Magnetospheric Physics Satellite (AMPS) was studied. The top level trade studies were extensive due to the instrument requirement for cooling at three temperature levels as opposed to the two levels initially described for the instrument. Approximately 12 different combinations of cryogens were investigated. The basic lifetime requirement for the instrument was 30 days. However, studies were also conducted for a follow-up mission requiring a 1 year lifetime. The top level trades led to the selection of a single stage supercritical helium baseline.

Aircraft Conceptual Design and Risk Analysis Using Physics-Based Noise Prediction

NASA Technical Reports Server (NTRS)

Olson, Erik D.; Mavris, Dimitri N.

2006-01-01

An approach was developed which allows for design studies of commercial aircraft using physics-based noise analysis methods while retaining the ability to perform the rapid trade-off and risk analysis studies needed at the conceptual design stage. A prototype integrated analysis process was created for computing the total aircraft EPNL at the Federal Aviation Regulations Part 36 certification measurement locations using physics-based methods for fan rotor-stator interaction tones and jet mixing noise. The methodology was then used in combination with design of experiments to create response surface equations (RSEs) for the engine and aircraft performance metrics, geometric constraints and take-off and landing noise levels. In addition, Monte Carlo analysis was used to assess the expected variability of the metrics under the influence of uncertainty, and to determine how the variability is affected by the choice of engine cycle. Finally, the RSEs were used to conduct a series of proof-of-concept conceptual-level design studies demonstrating the utility of the approach. The study found that a key advantage to using physics-based analysis during conceptual design lies in the ability to assess the benefits of new technologies as a function of the design to which they are applied. The greatest difficulty in implementing physics-based analysis proved to be the generation of design geometry at a sufficient level of detail for high-fidelity analysis.

What to Build for Middle-Agers to Come? Attractive and Necessary Functions of Exercise-Promotion Mobile Phone Apps: A Cross-Sectional Study

PubMed Central

Chien, Yu-Tai; Chen, Yu-Jen; Hsiung, Hsiao-Fang; Chen, Hsiao-Jung; Hsieh, Meng-Hua; Wu, Wen-Jie

2017-01-01

Background Physical activity is important for middle-agers to maintain health both in middle age and in old age. Although thousands of exercise-promotion mobile phone apps are available for download, current literature offers little understanding regarding which design features can enhance middle-aged adults’ quality perception toward exercise-promotion apps and which factor may influence such perception. Objectives The aims of this study were to understand (1) which design features of exercise-promotion apps can enhance quality perception of middle-agers, (2) whether their needs are matched by current functions offered in app stores, and (3) whether physical activity (PA) and mobile phone self-efficacy (MPSE) influence quality perception. Methods A total of 105 middle-agers participated and filled out three scales: the International Physical Activity Questionnaire (IPAQ), the MPSE scale, and the need for design features questionnaire. The design features were developed based on the Coventry, Aberdeen, and London—Refined (CALO-RE) taxonomy. Following the Kano quality model, the need for design features questionnaire asked participants to classify design features into five categories: attractive, one-dimensional, must-be, indifferent, and reverse. The quality categorization was conducted based on a voting approach and the categorization results were compared with the findings of a prevalence study to realize whether needs match current availability. In total, 52 multinomial logistic regression models were analyzed to evaluate the effects of PA level and MPSE on quality perception of design features. Results The Kano analysis on the total sample revealed that visual demonstration of exercise instructions is the only attractive design feature, whereas the other 51 design features were perceived with indifference. Although examining quality perception by PA level, 21 features are recommended to low level, 6 features to medium level, but none to high-level PA. In contrast, high-level MPSE is recommended with 14 design features, medium level with 6 features, whereas low-level participants are recommended with 1 feature. The analysis suggests that the implementation of demanded features could be low, as the average prevalence of demanded design features is 20% (4.3/21). Surprisingly, social comparison and social support, most implemented features in current apps, were categorized into the indifferent category. The magnitude of effect is larger for MPSE because it effects quality perception of more design features than PA. Delving into the 52 regression models revealed that high MPSE more likely induces attractive or one- dimensional categorization, suggesting the importance of technological self-efficacy on eHealth care promotion. Conclusions This study is the first to propose middle-agers’ needs in relation to mobile phone exercise-promotion. In addition to the tailor-made recommendations, suggestions are offered to app designers to enhance the performance of persuasive features. An interesting finding on change of quality perception attributed to MPSE is proposed as future research. PMID:28546140

A Research Study Using the Delphi Method to Define Essential Competencies for a High School Game Art and Design Course Framework at the National Level

ERIC Educational Resources Information Center

Mack, Nayo Corenus-Geneva

2011-01-01

This research study reports the findings of a Delphi study conducted to determine the essential competencies and objectives for a high school Game Art and Design course framework at the national level. The Delphi panel consisted of gaming, industry and educational experts from all over the world who were members of the International Game…

The Effects of Trait-Factor Theory Based Career Counseling Sessions on the Levels of Career Maturity and Indecision of High School Students

ERIC Educational Resources Information Center

Atli, Abdullah

2016-01-01

The study aimed to research the effect of career counseling sessions based on trait-factor theory on the career maturity and career indecision levels of high school students. "Single group pretest-posttest test design", one of the weaker test designs, was utilized in the study. The study was conducted with 57 students in Malatya city…

A User-Centered Framework for Deriving A Conceptual Design From User Experiences: Leveraging Personas and Patterns to Create Usable Designs

NASA Astrophysics Data System (ADS)

Javahery, Homa; Deichman, Alexander; Seffah, Ahmed; Taleb, Mohamed

Patterns are a design tool to capture best practices, tackling problems that occur in different contexts. A user interface (UI) design pattern spans several levels of design abstraction ranging from high-level navigation to low-level idioms detailing a screen layout. One challenge is to combine a set of patterns to create a conceptual design that reflects user experiences. In this chapter, we detail a user-centered design (UCD) framework that exploits the novel idea of using personas and patterns together. Personas are used initially to collect and model user experiences. UI patterns are selected based on personas pecifications; these patterns are then used as building blocks for constructing conceptual designs. Through the use of a case study, we illustrate how personas and patterns can act as complementary techniques in narrowing the gap between two major steps in UCD: capturing users and their experiences, and building an early design based on that information. As a result of lessons learned from the study and by refining our framework, we define a more systematic process called UX-P (User Experiences to Pattern), with a supporting tool. The process introduces intermediate analytical steps and supports designers in creating usable designs.

Levels of Evidence in Cosmetic Surgery: Analysis and Recommendations Using a New CLEAR Classification

PubMed Central

2013-01-01

Background: The Level of Evidence rating was introduced in 2011 to grade the quality of publications. This system evaluates study design but does not assess several other quality indicators. This study introduces a new “Cosmetic Level of Evidence And Recommendation” (CLEAR) classification that includes additional methodological criteria and compares this new classification with the existing system. Methods: All rated publications in the Cosmetic Section of Plastic and Reconstructive Surgery, July 2011 through June 2013, were evaluated. The published Level of Evidence rating (1–5) and criteria relevant to study design and methodology for each study were tabulated. A new CLEAR rating was assigned to each article, including a recommendation grade (A–D). The published Level of Evidence rating (1–5) was compared with the recommendation grade determined using the CLEAR classification. Results: Among the 87 cosmetic articles, 48 studies (55%) were designated as level 4. Three articles were assigned a level 1, but they contained deficiencies sufficient to undermine the conclusions. The correlation between the published Level of Evidence classification (1–5) and CLEAR Grade (A–D) was weak (ρ = 0.11, not significant). Only 41 studies (48%) evaluated consecutive patients or consecutive patients meeting inclusion criteria. Conclusions: The CLEAR classification considers methodological factors in evaluating study reliability. A prospective study among consecutive patients meeting eligibility criteria, with a reported inclusion rate, the use of contemporaneous controls when indicated, and consideration of confounders is a realistic goal. Such measures are likely to improve study quality. PMID:25289261

Predictors of Low-Care Prevalence in Florida Nursing Homes: The Role of Medicaid Waiver Programs

ERIC Educational Resources Information Center

Hahn, Elizabeth A.; Thomas, Kali S.; Hyer, Kathryn; Andel, Ross; Meng, Hongdao

2011-01-01

Purpose of the study: To examine the relationship between county-level Medicaid home- and community-based service (HCBS) waiver expenditures and the prevalence of low-care residents in Florida nursing homes (NHs). Design and Methods: The present study used a cross-sectional design. We combined two data sources: NH facility-level data (including…

Analysis of production responses to changing crude protein levels in lactating dairy cow diets when evaluated in continuous or change-over experimental designs

USDA-ARS?s Scientific Manuscript database

The objective of this study was to evaluate by meta-analysis the effect of experimental design on the production response functions obtained when changing crude protein levels in lactating dairy cow diets. The final database of studies that met the selection criteria contained 55 publications with 2...

The Effect of Designed Geometry Teaching Lesson to the Candidate Teachers' Van Hiele Geometric Thinking Level

ERIC Educational Resources Information Center

Yilmaz, Gül Kaleli; Koparan, Timur

2016-01-01

The aim of this study is to find out how designed Geometry Teaching Lesson affects candidate teachers' Van Hiele Geometric Thinking Levels. For that purpose, 14 weeks long study was performed with 44 candidate teachers who were university students in Turkey. Van Hiele Geometric Thinking Test was applied to candidate teachers before and after…

Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. Appendix G: LRB for the STS system study level 2 requirements, revision 1

NASA Technical Reports Server (NTRS)

1989-01-01

Requirements are presented for shuttle system definition; performance and design characteristics; shuttle vehicle end item performance and design characteristics; ground operations complex performance and design characteristics; operability and system design and construction standards; and quality control.

Aircraft Structural Mass Property Prediction Using Conceptual-Level Structural Analysis

NASA Technical Reports Server (NTRS)

Sexstone, Matthew G.

1998-01-01

This paper describes a methodology that extends the use of the Equivalent LAminated Plate Solution (ELAPS) structural analysis code from conceptual-level aircraft structural analysis to conceptual-level aircraft mass property analysis. Mass property analysis in aircraft structures has historically depended upon parametric weight equations at the conceptual design level and Finite Element Analysis (FEA) at the detailed design level. ELAPS allows for the modeling of detailed geometry, metallic and composite materials, and non-structural mass coupled with analytical structural sizing to produce high-fidelity mass property analyses representing fully configured vehicles early in the design process. This capability is especially valuable for unusual configuration and advanced concept development where existing parametric weight equations are inapplicable and FEA is too time consuming for conceptual design. This paper contrasts the use of ELAPS relative to empirical weight equations and FEA. ELAPS modeling techniques are described and the ELAPS-based mass property analysis process is detailed. Examples of mass property stochastic calculations produced during a recent systems study are provided. This study involved the analysis of three remotely piloted aircraft required to carry scientific payloads to very high altitudes at subsonic speeds. Due to the extreme nature of this high-altitude flight regime, few existing vehicle designs are available for use in performance and weight prediction. ELAPS was employed within a concurrent engineering analysis process that simultaneously produces aerodynamic, structural, and static aeroelastic results for input to aircraft performance analyses. The ELAPS models produced for each concept were also used to provide stochastic analyses of wing structural mass properties. The results of this effort indicate that ELAPS is an efficient means to conduct multidisciplinary trade studies at the conceptual design level.

Aircraft Structural Mass Property Prediction Using Conceptual-Level Structural Analysis

NASA Technical Reports Server (NTRS)

Sexstone, Matthew G.

1998-01-01

This paper describes a methodology that extends the use of the Equivalent LAminated Plate Solution (ELAPS) structural analysis code from conceptual-level aircraft structural analysis to conceptual-level aircraft mass property analysis. Mass property analysis in aircraft structures has historically depended upon parametric weight equations at the conceptual design level and Finite Element Analysis (FEA) at the detailed design level ELAPS allows for the modeling of detailed geometry, metallic and composite materials, and non-structural mass coupled with analytical structural sizing to produce high-fidelity mass property analyses representing fully configured vehicles early in the design process. This capability is especially valuable for unusual configuration and advanced concept development where existing parametric weight equations are inapplicable and FEA is too time consuming for conceptual design. This paper contrasts the use of ELAPS relative to empirical weight equations and FEA. ELAPS modeling techniques are described and the ELAPS-based mass property analysis process is detailed Examples of mass property stochastic calculations produced during a recent systems study are provided This study involved the analysis of three remotely piloted aircraft required to carry scientific payloads to very high altitudes at subsonic speeds. Due to the extreme nature of this high-altitude flight regime,few existing vehicle designs are available for use in performance and weight prediction. ELAPS was employed within a concurrent engineering analysis process that simultaneously produces aerodynamic, structural, and static aeroelastic results for input to aircraft performance analyses. The ELAPS models produced for each concept were also used to provide stochastic analyses of wing structural mass properties. The results of this effort indicate that ELAPS is an efficient means to conduct multidisciplinary trade studies at the conceptual design level.

Specification and Design Methodologies for High-Speed Fault-Tolerant Array Algorithms and Structures for VLSI.

DTIC Science & Technology

1987-06-01

evaluation and chip layout planning for VLSI digital systems. A high-level applicative (functional) language, implemented at UCLA, allows combining of...operating system. 2.1 Introduction The complexity of VLSI requires the application of CAD tools at all levels of the design process. In order to be...effective, these tools must be adaptive to the specific design. In this project we studied a design method based on the use of applicative languages

The acoustic performance of double-skin facades: A design support tool for architects

NASA Astrophysics Data System (ADS)

Batungbakal, Aireen

This study assesses and validates the influence of measuring sound in the urban environment and the influence of glass facade components in reducing sound transmission to the indoor environment. Among the most reported issues affecting workspaces, increased awareness to minimize noise led building designers to reconsider the design of building envelopes and its site environment. Outdoor sound conditions, such as traffic noise, challenge designers to accurately estimate the capability of glass facades in acquiring an appropriate indoor sound quality. Indicating the density of the urban environment, field-tests acquired existing sound levels in areas of high commercial development, employment, and traffic activity, establishing a baseline for sound levels common in urban work areas. Composed from the direct sound transmission loss of glass facades simulated through INSUL, a sound insulation software, data is utilized as an informative tool correlating the response of glass facade components towards existing outdoor sound levels of a project site in order to achieve desired indoor sound levels. This study progresses to link the disconnection in validating the acoustic performance of glass facades early in a project's design, from conditioned settings such as field-testing and simulations to project completion. Results obtained from the study's facade simulations and facade comparison supports that acoustic comfort is not limited to a singular solution, but multiple design options responsive to its environment.

The Effect of Lego Mindstorms Ev3 Based Design Activities on Students' Attitudes towards Learning Computer Programming, Self-Efficacy Beliefs and Levels of Academic Achievement

ERIC Educational Resources Information Center

Korkmaz, Özgen

2016-01-01

The aim of the study was to present the effect of Lego Mindstorms Ev3 based design activities on students' attitudes towards learning computer programming, self-efficacy beliefs and levels of academic achievement. The research is a pretest-posttest with control group semi-experimental study. The study group of the research consisted of 53 students…

Influence of implant neck design on facial bone crest dimensions in the esthetic zone analyzed by cone beam CT: a comparative study with a 5-to-9-year follow-up.

PubMed

Chappuis, Vivianne; Bornstein, Michael M; Buser, Daniel; Belser, Urs

2016-09-01

To examine the influence of two different neck designs on facial bone crest dimensions in esthetic single implant sites after a 5-to-9-year follow-up analyzed by cone beam computed tomography (CBCT). Sixty-one patients with an implant-borne single crown following early implant placement in the esthetic zone were enrolled. The test group consisted of a bone level (BL) neck design exhibiting a hydrophilic micro-rough surface combined with a platform-switching interface (PS) (n = 20). The control group comprised a soft tissue level (STL) neck design exhibiting a hydrophobic machined surface with a matching butt-joint interface (n = 41). Standardized clinical, radiologic, and esthetic parameters were applied. The facial bone crest dimensions were assessed by CBCT. Soft tissue parameters and pink esthetic scores yielded no significant differences between the two designs. Major differences were only observed at the implant shoulder level. The height of the facial bone crest for the BL design was located 0.2 mm above the implant shoulder level, whereas for the STL design, its location was 1.6 mm below. The width of the peri-implant saucer-like bone defect was reduced by 40% for the BL implant design. No differences were observed 2 mm below the shoulder level. The results of this comparative study suggest better crestal bone stability on the facial aspect of single implant sites in the esthetic zone for a BL design with a platform-switching concept when compared with STL implants with a butt-joint interface. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Factors Influencing Low Level of Women Participation in Literacy Programme in Maiha Local Government Area of Adamawa State

ERIC Educational Resources Information Center

Daniel, Aminchi

2015-01-01

This study was designed to determine the extent to which poverty, gender stereotype, socio-cultural belief and lack of awareness influence low level of women participation in literacy programme in Maiha Local Government Area of Adamawa State. Survey designed was adopted for the study and a sample consisting of three hundred (300) women who were…

Designing for Quality: An Analysis of Design and Pedagogical Issues in Online Course Development

ERIC Educational Resources Information Center

Sanga, Mapopa William

2017-01-01

This study investigated the process through which 100 online courses were developed in compliance with a purpose-made rubric designed to bring the courses to a level that would meet requirements of membership in a state authorization reciprocity agreement. The study identified and analyzed common design and pedagogical issues instructors…

Designing E-Portfolio with ARCS Motivational Design Strategies to Enhance Self-Directed Learning

ERIC Educational Resources Information Center

Mohamad, Syamsul Nor Azlan; Embi, Mohamed Amin; Nordin, Norazah Mohd

2016-01-01

This paper presents the instructional design effect on motivation towards the implementation of e-Portfolio with ARCS Motivational design strategies to enhance self-directed learning. The purpose of the study was to examine the learners' motivation level after the implementation of e-Portfolio. Initially, this paper was conducted to study a total…

A Statistical Simulation Approach to Safe Life Fatigue Analysis of Redundant Metallic Components

NASA Technical Reports Server (NTRS)

Matthews, William T.; Neal, Donald M.

1997-01-01

This paper introduces a dual active load path fail-safe fatigue design concept analyzed by Monte Carlo simulation. The concept utilizes the inherent fatigue life differences between selected pairs of components for an active dual path system, enhanced by a stress level bias in one component. The design is applied to a baseline design; a safe life fatigue problem studied in an American Helicopter Society (AHS) round robin. The dual active path design is compared with a two-element standby fail-safe system and the baseline design for life at specified reliability levels and weight. The sensitivity of life estimates for both the baseline and fail-safe designs was examined by considering normal and Weibull distribution laws and coefficient of variation levels. Results showed that the biased dual path system lifetimes, for both the first element failure and residual life, were much greater than for standby systems. The sensitivity of the residual life-weight relationship was not excessive at reliability levels up to R = 0.9999 and the weight penalty was small. The sensitivity of life estimates increases dramatically at higher reliability levels.

What to Build for Middle-Agers to Come? Attractive and Necessary Functions of Exercise-Promotion Mobile Phone Apps: A Cross-Sectional Study.

PubMed

Liao, Gen-Yih; Chien, Yu-Tai; Chen, Yu-Jen; Hsiung, Hsiao-Fang; Chen, Hsiao-Jung; Hsieh, Meng-Hua; Wu, Wen-Jie

2017-05-25

Physical activity is important for middle-agers to maintain health both in middle age and in old age. Although thousands of exercise-promotion mobile phone apps are available for download, current literature offers little understanding regarding which design features can enhance middle-aged adults' quality perception toward exercise-promotion apps and which factor may influence such perception. The aims of this study were to understand (1) which design features of exercise-promotion apps can enhance quality perception of middle-agers, (2) whether their needs are matched by current functions offered in app stores, and (3) whether physical activity (PA) and mobile phone self-efficacy (MPSE) influence quality perception. A total of 105 middle-agers participated and filled out three scales: the International Physical Activity Questionnaire (IPAQ), the MPSE scale, and the need for design features questionnaire. The design features were developed based on the Coventry, Aberdeen, and London-Refined (CALO-RE) taxonomy. Following the Kano quality model, the need for design features questionnaire asked participants to classify design features into five categories: attractive, one-dimensional, must-be, indifferent, and reverse. The quality categorization was conducted based on a voting approach and the categorization results were compared with the findings of a prevalence study to realize whether needs match current availability. In total, 52 multinomial logistic regression models were analyzed to evaluate the effects of PA level and MPSE on quality perception of design features. The Kano analysis on the total sample revealed that visual demonstration of exercise instructions is the only attractive design feature, whereas the other 51 design features were perceived with indifference. Although examining quality perception by PA level, 21 features are recommended to low level, 6 features to medium level, but none to high-level PA. In contrast, high-level MPSE is recommended with 14 design features, medium level with 6 features, whereas low-level participants are recommended with 1 feature. The analysis suggests that the implementation of demanded features could be low, as the average prevalence of demanded design features is 20% (4.3/21). Surprisingly, social comparison and social support, most implemented features in current apps, were categorized into the indifferent category. The magnitude of effect is larger for MPSE because it effects quality perception of more design features than PA. Delving into the 52 regression models revealed that high MPSE more likely induces attractive or one- dimensional categorization, suggesting the importance of technological self-efficacy on eHealth care promotion. This study is the first to propose middle-agers' needs in relation to mobile phone exercise-promotion. In addition to the tailor-made recommendations, suggestions are offered to app designers to enhance the performance of persuasive features. An interesting finding on change of quality perception attributed to MPSE is proposed as future research. ©Gen-Yih Liao, Yu-Tai Chien, Yu-Jen Chen, Hsiao-Fang Hsiung, Hsiao-Jung Chen, Meng-Hua Hsieh, Wen-Jie Wu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 25.05.2017.

Qualitative study to understand the barriers to recruiting young people with cancer to BRIGHTLIGHT: a national cohort study in England

PubMed Central

Kenten, Charlotte; Martins, Ana; Fern, Lorna A; Gibson, Faith; Lea, Sarah; Ngwenya, Nothando; Whelan, Jeremy S; Taylor, Rachel M

2017-01-01

Objectives BRIGHTLIGHT is a national evaluation of cancer services for teenagers and young adults in England. Following challenges with recruitment, our aim was to understand more fully healthcare professionals’ perspectives of the challenges of recruiting young people to a low-risk observational study, and to provide guidance for future recruitment processes. Design Qualitative. Setting National Health Service (NHS) hospitals in England. Methods Semistructured telephone interviews with a convenience sample of 23 healthcare professionals. Participants included principal investigators/other staff recruiting into the BRIGHTLIGHT study. Data were analysed using framework analysis. Results The emergent themes were linked to levels of research organisational management, described using the levels of social network analysis: micro-level (the individual; in this case the target population to be recruited—young people with cancer); meso-level (the organisation; refers to place of recruitment and people responsible for recruitment); and macro-level (the large-scale or global structure; refers to the wider research function of the NHS and associated policies). Study-related issues occurred across all three levels, which were influenced by the context of the study. At the meso-level, professionals’ perceptions of young people and communication between professionals generated age/cancer type silos, resulting in recruitment of either children or adults, but not both by the same team, and only in the cancer type the recruiting professional was aligned to. At the macro-level the main barrier was discordant configuration of a research service with a clinical service. Conclusions This study has identified significant barriers to recruitment mainly at the meso-level and macro-level, which are more challenging for research teams to influence. We suggest that interconnected whole-system changes are required to facilitate the success of interventions designed to improve recruitment. Interventions targeted at study design/management and the micro-level only may be less successful. We offer solutions to be considered by those involved at all levels of research for this population. PMID:29122799

Tropical Rainfall Measuring Mission (TRMM) project. VI - Spacecraft, scientific instruments, and launching rocket. Part 1 - Spacecraft

NASA Technical Reports Server (NTRS)

Keating, Thomas; Ihara, Toshio; Miida, Sumio

1990-01-01

A cooperative United States/Japan study was made for one year from 1987 to 1988 regarding the feasibility of the Tropical Rainfall Measuring Mission (TRMM). As part of this study a phase-A-level design of spacecraft for TRMM was developed by NASA/GSFC, and the result was documented in a feasibility study. The phase-A-level design is developed for the TRMM satellite utilizing a multimission spacecraft.

A Web Centric Architecture for Deploying Multi-Disciplinary Engineering Design Processes

NASA Technical Reports Server (NTRS)

Woyak, Scott; Kim, Hongman; Mullins, James; Sobieszczanski-Sobieski, Jaroslaw

2004-01-01

There are continuous needs for engineering organizations to improve their design process. Current state of the art techniques use computational simulations to predict design performance, and optimize it through advanced design methods. These tools have been used mostly by individual engineers. This paper presents an architecture for achieving results at an organization level beyond individual level. The next set of gains in process improvement will come from improving the effective use of computers and software within a whole organization, not just for an individual. The architecture takes advantage of state of the art capabilities to produce a Web based system to carry engineering design into the future. To illustrate deployment of the architecture, a case study for implementing advanced multidisciplinary design optimization processes such as Bi-Level Integrated System Synthesis is discussed. Another example for rolling-out a design process for Design for Six Sigma is also described. Each example explains how an organization can effectively infuse engineering practice with new design methods and retain the knowledge over time.

Solving bi-level optimization problems in engineering design using kriging models

NASA Astrophysics Data System (ADS)

Xia, Yi; Liu, Xiaojie; Du, Gang

2018-05-01

Stackelberg game-theoretic approaches are applied extensively in engineering design to handle distributed collaboration decisions. Bi-level genetic algorithms (BLGAs) and response surfaces have been used to solve the corresponding bi-level programming models. However, the computational costs for BLGAs often increase rapidly with the complexity of lower-level programs, and optimal solution functions sometimes cannot be approximated by response surfaces. This article proposes a new method, namely the optimal solution function approximation by kriging model (OSFAKM), in which kriging models are used to approximate the optimal solution functions. A detailed example demonstrates that OSFAKM can obtain better solutions than BLGAs and response surface-based methods, and at the same time reduce the workload of computation remarkably. Five benchmark problems and a case study of the optimal design of a thin-walled pressure vessel are also presented to illustrate the feasibility and potential of the proposed method for bi-level optimization in engineering design.

Study of design constraints on helicopter noise

NASA Technical Reports Server (NTRS)

Sternfeld, H., Jr.; Wiedersum, C. W.

1979-01-01

A means of estimating the noise generated by a helicopter main rotor using information which is generally available during the preliminary design phase of aircraft development is presented. The method utilizes design charts and tables which do not require an understanding of acoustical theory or computational procedures in order to predict the perceived noise level, a weighted sound pressure level, or C weighted sound pressure level of a single hovering rotor. A method for estimating the effective perceived noise level in forward flight is also included. In order to give the designer an assessment of the relative rotor performance, which may be traded off against noise, an additional chart for estimating the percent of available rotor thrust which must be expended in lifting the rotor and drive system, is included as well as approach for comparing the subjective acceptability of various rotors once the absolute sound pressure levels are predicted.

Finding Efficiency in the Design of Large Multisite Evaluations: Estimating Variances for Science Achievement Studies

ERIC Educational Resources Information Center

Westine, Carl D.

2016-01-01

Little is known empirically about intraclass correlations (ICCs) for multisite cluster randomized trial (MSCRT) designs, particularly in science education. In this study, ICCs suitable for science achievement studies using a three-level (students in schools in districts) MSCRT design that block on district are estimated and examined. Estimates of…

A Study of Trial and Error Learning in Technology, Engineering, and Design Education

ERIC Educational Resources Information Center

Franzen, Marissa Marie Sloan

2016-01-01

The purpose of this research study was to determine if trial and error learning was an effective, practical, and efficient learning method for Technology, Engineering, and Design Education students at the post-secondary level. A mixed methods explanatory research design was used to measure the viability of the learning source. The study sample was…

Estimating Slope and Level Change in N = 1 Designs

ERIC Educational Resources Information Center

Solanas, Antonio; Manolov, Rumen; Onghena, Patrick

2010-01-01

The current study proposes a new procedure for separately estimating slope change and level change between two adjacent phases in single-case designs. The procedure eliminates baseline trend from the whole data series before assessing treatment effectiveness. The steps necessary to obtain the estimates are presented in detail, explained, and…

77 FR 37411 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

.... Administrators. Design Survey Data Collection (Approved March 7, 2012) Design Survey: Discussion State-Level 30 1... Youth Services Bureau (FYSB) and the Office of Planning, Research, and Evaluation (OPRE), Administration... Impact and In-depth Implementation Study (IS); 2. The Design and Implementation Study (DIS); and 3. The...

Study on safety level of RC beam bridges under earthquake

NASA Astrophysics Data System (ADS)

Zhao, Jun; Lin, Junqi; Liu, Jinlong; Li, Jia

2017-08-01

This study considers uncertainties in material strengths and the modeling which have important effects on structural resistance force based on reliability theory. After analyzing the destruction mechanism of a RC bridge, structural functions and the reliability were given, then the safety level of the piers of a reinforced concrete continuous girder bridge with stochastic structural parameters against earthquake was analyzed. Using response surface method to calculate the failure probabilities of bridge piers under high-level earthquake, their seismic reliability for different damage states within the design reference period were calculated applying two-stage design, which describes seismic safety level of the built bridges to some extent.

Online and Face-to-Face Anatomy Dissection Labs: A Comparison of Levels of Achievement in Learning Outcomes and Perception of Learning and Satisfaction

ERIC Educational Resources Information Center

Davidson, Jenna L.

2017-01-01

This quantitative study examined levels of achievement in learning outcomes when using a face-to-face dissection lab compared to an online dissection lab. Constructivist theory and Understanding by Design learning framework were at the core of this research study design. Data was collected from 24 health science students at a private Midwestern…

Validating the Vocabulary Levels Test with Fourth and Fifth Graders to Identify Students At-Risk in Vocabulary Development Using a Quasiexperimental Single Group Design

ERIC Educational Resources Information Center

Dunn, Suzanna

2012-01-01

This quasiexperimental single group design study investigated the validity of the Vocabulary Levels Test (VLT) to identify fourth and fifth grade students who are at-risk in vocabulary development. The subjects of the study were 88 fourth and fifth grade students at one elementary school in Washington State. The Group Reading Assessment and…

Overcoming ecologic bias using the two-phase study design.

PubMed

Wakefield, Jon; Haneuse, Sebastien J-P A

2008-04-15

Ecologic (aggregate) data are widely available and widely utilized in epidemiologic studies. However, ecologic bias, which arises because aggregate data cannot characterize within-group variability in exposure and confounder variables, can only be removed by supplementing ecologic data with individual-level data. Here the authors describe the two-phase study design as a framework for achieving this objective. In phase 1, outcomes are stratified by any combination of area, confounders, and error-prone (or discretized) versions of exposures of interest. Phase 2 data, sampled within each phase 1 stratum, provide accurate measures of exposure and possibly of additional confounders. The phase 1 aggregate-level data provide a high level of statistical power and a cross-classification by which individuals may be efficiently sampled in phase 2. The phase 2 individual-level data then provide a control for ecologic bias by characterizing the within-area variability in exposures and confounders. In this paper, the authors illustrate the two-phase study design by estimating the association between infant mortality and birth weight in several regions of North Carolina for 2000-2004, controlling for gender and race. This example shows that the two-phase design removes ecologic bias and produces gains in efficiency over the use of case-control data alone. The authors discuss the advantages and disadvantages of the approach.

Description of research design of articles published in four Brazilian physical therapy journals

PubMed Central

Saragiotto, Bruno T.; Costa, Lucíola C. M.; Oliveira, Ronaldo F.; Lopes, Alexandre D.; Moseley, Anne M.; Costa, Leonardo O. P.

2014-01-01

Background While the research design of articles published in medical journals and in some physical therapy journals has already been evaluated, this has not been investigated in Brazilian physical therapy journals. Objective To describe the research design used in all articles published in Brazilian scientific journals that are freely available, have high Qualis rankings, and are relevant to physical therapy over a 7-year period. Method We extracted the bibliometric data, research design, research type (human or animal), and clinical area for all articles published. The articles were grouped into their level of evidence, and descriptive analyses were performed. We calculated the frequency, proportions of articles, and 95% confidence interval of these proportions with each research design in each journal. We cross-tabulated the clinical areas with research designs (expressed as number and percentages). Results A total of 1,458 articles from four Brazilian journals were found: Revista Brasileira de Fisioterapia, Revista Fisioterapia em Movimento, Revista Fisioterapia e Pesquisa, and Revista Acta Fisiátrica. The majority of articles were classified as level II of evidence (60%), followed by level III (29%) and level I (10%). The most prevalent research designs were cross-sectional studies (38%), single-case or case-series studies, and narrative reviews. Most articles reported human research and were in the musculoskeletal, neurologic, and cardiothoracic areas. Conclusions Most of the research published in Brazilian physical therapy journals used levels II and III of evidence. Increasing the publication rate of systematic reviews and randomized controlled trials would provide more high-quality evidence to guide evidence-based physical therapy practice. PMID:24675913

Description of research design of articles published in four Brazilian physical therapy journals.

PubMed

Saragiotto, Bruno T; Costa, Lucíola C M; Oliveira, Ronaldo F; Lopes, Alexandre D; Moseley, Anne M; Costa, Leonardo O P

2014-01-01

While the research design of articles published in medical journals and in some physical therapy journals has already been evaluated, this has not been investigated in Brazilian physical therapy journals. Objective : To describe the research design used in all articles published in Brazilian scientific journals that are freely available, have high Qualis rankings, and are relevant to physical therapy over a 7-year period. We extracted the bibliometric data, research design, research type (human or animal), and clinical area for all articles published. The articles were grouped into their level of evidence, and descriptive analyses were performed. We calculated the frequency, proportions of articles, and 95% confidence interval of these proportions with each research design in each journal. We cross-tabulated the clinical areas with research designs (expressed as number and percentages). A total of 1,458 articles from four Brazilian journals were found: Revista Brasileira de Fisioterapia, Revista Fisioterapia em Movimento, Revista Fisioterapia e Pesquisa, and Revista Acta Fisiátrica. The majority of articles were classified as level II of evidence (60%), followed by level III (29%) and level I (10%). The most prevalent research designs were cross-sectional studies (38%), single-case or case-series studies, and narrative reviews. Most articles reported human research and were in the musculoskeletal, neurologic, and cardiothoracic areas. Most of the research published in Brazilian physical therapy journals used levels II and III of evidence. Increasing the publication rate of systematic reviews and randomized controlled trials would provide more high-quality evidence to guide evidence-based physical therapy practice.

The impact of solar cell technology on planar solar array performance

NASA Technical Reports Server (NTRS)

Mills, Michael W.; Kurland, Richard M.

1989-01-01

The results of a study into the potential impact of advanced solar cell technologies on the characteristics (weight, cost, area) of typical planar solar arrays designed for low, medium and geosynchronous altitude earth orbits are discussed. The study considered planar solar array substrate designs of lightweight, rigid-panel graphite epoxy and ultra-lightweight Kapton. The study proposed to answer the following questions: Do improved cell characteristics translate into array-level weight, size and cost improvements; What is the relative importance of cell efficiency, weight and cost with respect to array-level performance; How does mission orbital environment affect array-level performance. Comparisons were made at the array level including all mechanisms, hinges, booms, and harnesses. Array designs were sized to provide 5kW of array power (not spacecraft bus power, which is system dependent but can be scaled from given values). The study used important grass roots issues such as use of the GaAs radiation damage coefficients as determined by Anspaugh. Detailed costing was prepared, including cell and cover costs, and manufacturing attrition rates for the various cell types.

Multi-level Expression Design Language: Requirement level (MEDL-R) system evaluation

NASA Technical Reports Server (NTRS)

1980-01-01

An evaluation of the Multi-Level Expression Design Language Requirements Level (MEDL-R) system was conducted to determine whether it would be of use in the Goddard Space Flight Center Code 580 software development environment. The evaluation is based upon a study of the MEDL-R concept of requirement languages, the functions performed by MEDL-R, and the MEDL-R language syntax. Recommendations are made for changes to MEDL-R that would make it useful in the Code 580 environment.

Towards a general object-oriented software development methodology

NASA Technical Reports Server (NTRS)

Seidewitz, ED; Stark, Mike

1986-01-01

Object diagrams were used to design a 5000 statement team training exercise and to design the entire dynamics simulator. The object diagrams are also being used to design another 50,000 statement Ada system and a personal computer based system that will be written in Modula II. The design methodology evolves out of these experiences as well as the limitations of other methods that were studied. Object diagrams, abstraction analysis, and associated principles provide a unified framework which encompasses concepts from Yourdin, Booch, and Cherry. This general object-oriented approach handles high level system design, possibly with concurrency, through object-oriented decomposition down to a completely functional level. How object-oriented concepts can be used in other phases of the software life-cycle, such as specification and testing is being studied concurrently.

Analysis of a spacecraft life support system for a Mars mission.

PubMed

Czupalla, M; Aponte, V; Chappell, S; Klaus, D

2004-01-01

This report summarizes a trade study conducted as part of the Fall 2002 semester Spacecraft Life Support System Design course (ASEN 5116) in the Aerospace Engineering Sciences Department at the University of Colorado. It presents an analysis of current life support system technologies and a preliminary design of an integrated system for supporting humans during transit to and on the surface of the planet Mars. This effort was based on the NASA Design Reference Mission (DRM) for the human exploration of Mars [NASA Design Reference Mission (DRM) for Mars, Addendum 3.0, from the world wide web: http://exploration.jsc.nasa.gov/marsref/contents.html.]. The integrated design was broken into four subsystems: Water Management, Atmosphere Management, Waste Processing, and Food Supply. The process started with the derivation of top-level requirements from the DRM. Additional system and subsystem level assumptions were added where clarification was needed. Candidate technologies were identified and characterized based on performance factors. Trade studies were then conducted for each subsystem. The resulting technologies were integrated into an overall design solution using mass flow relationships. The system level trade study yielded two different configurations--one for the transit to Mars and another for the surface habitat, which included in situ resource utilization. Equivalent System Mass analyses were used to compare each design against an open-loop (non-regenerable) baseline system. c2003 International Astronautical Federation. Published by Elsevier Ltd. All rights reserved.

Study of Self: The Self as Designer in Online Teacher Education

ERIC Educational Resources Information Center

Parsons, Allison Ward; Hjalmarson, Margret A.

2017-01-01

In this article we describe our engagement in self-study as part of an examination of design-based research for education. We focus on graduate-level online teacher education as an example of how self-study provided a means of examining deeply our teaching and our roles as teacher and designer in the learning environment. We posit that online…

Examining Technology and Teaching Efficacy of Preservice Teacher Candidates: A Deliberate Course Design Model

ERIC Educational Resources Information Center

Willis, Jana M.

2015-01-01

Training programs that improve technology self-efficacy of teacher candidates will better prepare candidates to overcome technology challenges with greater levels of confidence. The purpose of this study was to examine self-efficacy levels of preservice teacher candidates who participated in scaffolded technology training designed to establish and…

Exploring the Effect of Materials Designed with Augmented Reality on Language Learners' Vocabulary Learning

ERIC Educational Resources Information Center

Solak, Ekrem; Cakir, Recep

2015-01-01

The purpose of this study was to determine the motivational level of the participants in a language classroom towards course materials designed in accordance with augmented reality technology and to identify the correlation between academic achievement and motivational level. 130 undergraduate students from a state-run university in Turkey…

What Is the Function of a Figurine? Can the Repertory Grid Technique Tell?

ERIC Educational Resources Information Center

Persson, Helena Isakssson

2016-01-01

Teaching design and product development at upper secondary school level in Sweden is a matter of interdisciplinary considerations. Education in product development, at this level, prepares students for further studies and career in engineering or industrial design. Knowledge of artefacts is an important element in the education. In coherence with…

Basic School Teachers' Perceptions about Curriculum Design in Ghana

ERIC Educational Resources Information Center

Abudu, Amadu Musah; Mensah, Mary Afi

2016-01-01

This study focused on teachers' perceptions about curriculum design and barriers to their participation. The sample size was 130 teachers who responded to a questionnaire. The analyses made use of descriptive statistics and descriptions. The study found that the level of teachers' participation in curriculum design is low. The results further…

Contextual Shaping of Student Design Practices: The Role of Constraint in First-Year Engineering Design

NASA Astrophysics Data System (ADS)

Goncher, Andrea M.

thResearch on engineering design is a core area of concern within engineering education, and a fundamental understanding of how engineering students approach and undertake design is necessary in order to develop effective design models and pedagogies. This dissertation contributes to scholarship on engineering design by addressing a critical, but as yet underexplored, problem: how does the context in which students design shape their design practices? Using a qualitative study comprising of video data of design sessions, focus group interviews with students, and archives of their design work, this research explored how design decisions and actions are shaped by context, specifically the context of higher education. To develop a theoretical explanation for observed behavior, this study used the nested structuration. framework proposed by Perlow, Gittell, & Katz (2004). This framework explicated how teamwork is shaped by mutually reinforcing relationships at the individual, organizational, and institutional levels. I appropriated this framework to look specifically at how engineering students working on a course-related design project identify constraints that guide their design and how these constraints emerge as students interact while working on the project. I first identified and characterized the parameters associated with the design project from the student perspective and then, through multi-case studies of four design teams, I looked at the role these parameters play in student design practices. This qualitative investigation of first-year engineering student design teams revealed mutual and interconnected relationships between students and the organizations and institutions that they are a part of. In addition to contributing to research on engineering design, this work provides guidelines and practices to help design educators develop more effective design projects by incorporating constraints that enable effective design and learning. Moreover, I found that when appropriated in the context of higher education, multiple sublevels existed within nested structuration's organizational context and included course-level and project-level factors. The implications of this research can be used to improve the design of engineering course projects as well as the design of research efforts related to design in engineering education.

NASA System-Level Design, Analysis and Simulation Tools Research on NextGen

NASA Technical Reports Server (NTRS)

Bardina, Jorge

2011-01-01

A review of the research accomplished in 2009 in the System-Level Design, Analysis and Simulation Tools (SLDAST) of the NASA's Airspace Systems Program is presented. This research thrust focuses on the integrated system-level assessment of component level innovations, concepts and technologies of the Next Generation Air Traffic System (NextGen) under research in the ASP program to enable the development of revolutionary improvements and modernization of the National Airspace System. The review includes the accomplishments on baseline research and the advancements on design studies and system-level assessment, including the cluster analysis as an annualization standard of the air traffic in the U.S. National Airspace, and the ACES-Air MIDAS integration for human-in-the-loop analyzes within the NAS air traffic simulation.

The outcome of trauma patients with do-not-resuscitate orders.

PubMed

Matsushima, Kazuhide; Schaefer, Eric W; Won, Eugene J; Armen, Scott B

2016-02-01

Institutional variation in outcome of patients with do-not-resuscitate (DNR) orders has not been well described in the setting of trauma. The purpose of this study was to assess the impact of trauma center designation on outcome of patients with DNR orders. A statewide trauma database (Pennsylvania Trauma Outcome Study) was used for the analysis. Characteristics of patients with DNR orders were compared between state-designated level 1 and 2 trauma centers. Inhospital mortality and major complication rates were compared using hierarchical logistic regression models that included a random effect for trauma centers. We adjusted for a number of potential confounders and allowed for nonlinearity in injury severity score and age in these models. A total of 106,291 patients (14 level 1 and 11 level 2 trauma centers) were identified in the Pennsylvania Trauma Outcome Study database between 2007 and 2011. We included 5953 patients with DNR orders (5.6%). Although more severely injured patients with comorbid disease were made DNR in level 1 trauma centers, trauma center designation level was not a significant factor for inhospital mortality of patients with DNR orders (odds ratio, 1.33; 95% confidence interval, 0.81-2.18; P = 0.26). Level 1 trauma centers were significantly associated with a higher rate of major complications (odds ratio, 1.75; 95% confidence interval, 1.11-2.75; P = 0.016). Inhospital mortality of patients with DNR orders was not significantly associated with trauma designation level after adjusting for case mix. More aggressive treatment or other unknown factors may have resulted in a significantly higher complication rate at level 1 trauma centers. Copyright © 2016 Elsevier Inc. All rights reserved.

Evaluation of the HFACS-ADF safety classification system: inter-coder consensus and intra-coder consistency.

PubMed

Olsen, Nikki S; Shorrock, Steven T

2010-03-01

This article evaluates an adaptation of the human factors analysis and classification system (HFACS) adopted by the Australian Defence Force (ADF) to classify factors that contribute to incidents. Three field studies were undertaken to assess the reliability of HFACS-ADF in the context of a particular ADF air traffic control (ATC) unit. Study one was designed to assess inter-coder consensus between many coders for two incident reports. Study two was designed to assess inter-coder consensus between one participant and the previous original analysts for a large set of incident reports. Study three was designed to test intra-coder consistency for four participants over many months. For all studies, agreement was low at the level of both fine-level HFACS-ADF descriptors and high-level HFACS-type categories. A survey of participants suggested that they were not confident that HFACS-ADF could be used consistently. The three field studies reported suggest that the ADF adaptation of HFACS is unreliable for incident analysis at the ATC unit level, and may therefore be invalid in this context. Several reasons for the results are proposed, associated with the underlying HFACS model and categories, the HFACS-ADF adaptations, the context of use, and the conduct of the studies. Copyright 2009 Elsevier Ltd. All rights reserved.

Advanced photovoltaic solar array - Design and performance

NASA Technical Reports Server (NTRS)

Kurland, Richard; Stella, Paul

1992-01-01

This paper reports on the development of an ultralightweight flexible blanket, flatpack, foldout solar array design that can provide 3- to 4-fold improvement on specific power performance of current rigid panel arrays and a factor of two improvement over a first-generation flexible blanket array developed as a forerunner to the Space Station Freedom array. To date a prototype wing has been built with a projected specific power performance of about 138 W/kg at beginning-of-life (BOL) and 93 W/kg end-of-life (EOL) at 12 kW (BOL) for a 10-year geosynchronous (GEO) mission. The prototype wing hardware has been subjected to a series of system-level tests to demonstrate design feasibility. The design of the array is summarized. The major trade studies that led to the selection of the baseline design are discussed. Key system-level and component-level testing are described. Array-level performance projections are presented as a function of existing and advanced solar array component technology for various mission applications.

Vibration Analysis of a Split Path Gearbox

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.; Rashidi, Majid

1995-01-01

Split path gearboxes can be attractive alternatives to the common planetary designs for rotorcraft, but because they have seen little use, they are relatively high risk designs. To help reduce the risk of fielding a rotorcraft with a split path gearbox, the vibration and dynamic characteristics of such a gearbox were studied. A mathematical model was developed by using the Lagrangian method, and it was applied to study the effect of three design variables on the natural frequencies and vibration energy of the gearbox. The first design variable, shaft angle, had little influence on the natural frequencies. The second variable, mesh phasing, had a strong effect on the levels of vibration energy, with phase angles of 0 deg and 180 deg producing low vibration levels. The third design variable, the stiffness of the shafts connecting the spur gears to the helical pinions, strongly influenced the natural frequencies of some of the vibration modes, including two of the dominant modes. We found that, to achieve the lowest level of vibration energy, the natural frequencies of these two dominant modes should be less than those of the main excitation sources.

I'm trying to heal...noise levels in a pediatric intensive care unit.

PubMed

Milette, Isabelle H; Carnevale, Franco A

2003-01-01

The literature demonstrates clearly that most intensive care units exceed the standard recommendations for noise levels in hospitals, and that high noise levels have negative impacts on patients and staff. The purpose of this study was to evaluate the level of noise in a PICU and compare it to the recommendations of international bodies. We outline recommendations to promote the awareness of this problem and suggest strategies to decrease the level of noise in a PICU. The orientations of these strategies are threefold: 1) architectural-acoustic design, 2) equipment design and, most importantly, 3) staff education.

Methodologic considerations in the design and analysis of nested case-control studies: association between cytokines and postoperative delirium.

PubMed

Ngo, Long H; Inouye, Sharon K; Jones, Richard N; Travison, Thomas G; Libermann, Towia A; Dillon, Simon T; Kuchel, George A; Vasunilashorn, Sarinnapha M; Alsop, David C; Marcantonio, Edward R

2017-06-06

The nested case-control study (NCC) design within a prospective cohort study is used when outcome data are available for all subjects, but the exposure of interest has not been collected, and is difficult or prohibitively expensive to obtain for all subjects. A NCC analysis with good matching procedures yields estimates that are as efficient and unbiased as estimates from the full cohort study. We present methodological considerations in a matched NCC design and analysis, which include the choice of match algorithms, analysis methods to evaluate the association of exposures of interest with outcomes, and consideration of overmatching. Matched, NCC design within a longitudinal observational prospective cohort study in the setting of two academic hospitals. Study participants are patients aged over 70 years who underwent scheduled major non-cardiac surgery. The primary outcome was postoperative delirium from in-hospital interviews and medical record review. The main exposure was IL-6 concentration (pg/ml) from blood sampled at three time points before delirium occurred. We used nonparametric signed ranked test to test for the median of the paired differences. We used conditional logistic regression to model the risk of IL-6 on delirium incidence. Simulation was used to generate a sample of cohort data on which unconditional multivariable logistic regression was used, and the results were compared to those of the conditional logistic regression. Partial R-square was used to assess the level of overmatching. We found that the optimal match algorithm yielded more matched pairs than the greedy algorithm. The choice of analytic strategy-whether to consider measured cytokine levels as the predictor or outcome-- yielded inferences that have different clinical interpretations but similar levels of statistical significance. Estimation results from NCC design using conditional logistic regression, and from simulated cohort design using unconditional logistic regression, were similar. We found minimal evidence for overmatching. Using a matched NCC approach introduces methodological challenges into the study design and data analysis. Nonetheless, with careful selection of the match algorithm, match factors, and analysis methods, this design is cost effective and, for our study, yields estimates that are similar to those from a prospective cohort study design.

The Aurora space launcher concept

NASA Astrophysics Data System (ADS)

Kopp, Alexander; Stappert, Sven; Mattsson, David; Olofsson, Kurt; Marklund, Erik; Kurth, Guido; Mooij, Erwin; Roorda, Evelyne

2017-11-01

This paper gives an overview about the Aurora reusable space launcher concept study that was initiated in late-2015/early-2016. Within the Aurora study, several spaceplane-like vehicle configurations with different geometries, propulsion systems and mission profiles will be designed, investigated and evaluated with respect to their technical and economic feasibility. The first part of this paper will discuss the study logic and the current status of the Aurora studies and introduces the first vehicle configurations and their system design status. As the identification of highly efficient structural designs is of particular interest for Aurora, the structural design and analysis approach will be discussed in higher level of detail. A special design feature of the Aurora vehicle configurations is the utilization of the novel thin-ply composite material technology for structural mass reductions. Therefore, the second part of this paper will briefly discuss this technology and investigate the application and potential mass savings on vehicle level within simplified structural analysis studies. The results indicate that significant mass savings could be possible. Finally, an outlook on the next steps is provided.

The Aurora space launcher concept

NASA Astrophysics Data System (ADS)

Kopp, Alexander; Stappert, Sven; Mattsson, David; Olofsson, Kurt; Marklund, Erik; Kurth, Guido; Mooij, Erwin; Roorda, Evelyne

2018-06-01

This paper gives an overview about the Aurora reusable space launcher concept study that was initiated in late-2015/early-2016. Within the Aurora study, several spaceplane-like vehicle configurations with different geometries, propulsion systems and mission profiles will be designed, investigated and evaluated with respect to their technical and economic feasibility. The first part of this paper will discuss the study logic and the current status of the Aurora studies and introduces the first vehicle configurations and their system design status. As the identification of highly efficient structural designs is of particular interest for Aurora, the structural design and analysis approach will be discussed in higher level of detail. A special design feature of the Aurora vehicle configurations is the utilization of the novel thin-ply composite material technology for structural mass reductions. Therefore, the second part of this paper will briefly discuss this technology and investigate the application and potential mass savings on vehicle level within simplified structural analysis studies. The results indicate that significant mass savings could be possible. Finally, an outlook on the next steps is provided.

Empirical studies of design software: Implications for software engineering environments

NASA Technical Reports Server (NTRS)

Krasner, Herb

1988-01-01

The empirical studies team of MCC's Design Process Group conducted three studies in 1986-87 in order to gather data on professionals designing software systems in a range of situations. The first study (the Lift Experiment) used thinking aloud protocols in a controlled laboratory setting to study the cognitive processes of individual designers. The second study (the Object Server Project) involved the observation, videotaping, and data collection of a design team of a medium-sized development project over several months in order to study team dynamics. The third study (the Field Study) involved interviews with the personnel from 19 large development projects in the MCC shareholders in order to study how the process of design is affected by organizationl and project behavior. The focus of this report will be on key observations of design process (at several levels) and their implications for the design of environments.

Predictors of HIV enacted stigma among Chilean women

PubMed Central

Cianelli, Rosina; Villlegas, Natalia; De Oliveira, Giovanna; Hires, Kimberly; Gattamorta, Karina; Ferrer, Lilian; Peragallo, Nilda

2015-01-01

Aims and objectives To investigate if socio-demographic factors, religiosity, HIV-related knowledge, Marianismo, history of having been tested for HIV, knowing someone who died of AIDS and HIV risk perception were predictive factors to HIV enacted stigma predictors among Chilean women. Background HIV infection is the number one cause of death among women during their reproductive years. In Chile, studies with people living with HIV demonstrate the existence of HIV-related stigma. However, limited evidence is available about the underlying causes of HIV enacted stigma that results in stigmatisation and discrimination. Design The current cross-sectional study is a secondary analysis of data collected to assess the impact of an HIV prevention intervention (Mano a Mano-Mujer) designed for Chilean women. A quasi-experimental design was used in the original study. Methods This study was conducted in two communities in Santiago, Chile. The sample for this study consisted of 496 Chileans between ages 18–49. Descriptive statistics and multiple regression were used for the analysis. Results Participants in the study reported high levels (77·8%) of HIV enacted stigma. Higher levels of HIV-related knowledge were associated with lower levels of HIV enacted stigma. Women with higher education had lower levels of HIV enacted stigma than women with elementary education. In addition, greater levels of marianismo (cultural belief that women should be passive, faithful, and devoted to family) were associated with higher HIV enacted stigma scores. Conclusions The findings reflected the presence of HIV enacted stigma among Chilean women. Identifying the significant predictors of HIV enacted stigma can help the nursing community to design HIV prevention interventions that include the reduction in HIV enacted stigma. HIV evidence-based prevention interventions should incorporate contents related to stigma to contribute to prevent HIV enacted stigma at individual and community levels in accordance with the bioecological model. Relevance to clinical practice The results of this study could serve to develop HIV prevention interventions that target the reduction in HIV enacted stigma. PMID:25693422

75 FR 43172 - Maternal, Infant, and Early Childhood Home Visiting Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

... the evaluation results have been published in a peer-reviewed journal; or (bb) quasi-experimental... design (i.e. randomized controlled trial [RCT] or quasi-experimental design [QED]), level of attrition... a quasi-experimental design as a study design in which sample members are selected for the program...

Integrated modeling environment for systems-level performance analysis of the Next-Generation Space Telescope

NASA Astrophysics Data System (ADS)

Mosier, Gary E.; Femiano, Michael; Ha, Kong; Bely, Pierre Y.; Burg, Richard; Redding, David C.; Kissil, Andrew; Rakoczy, John; Craig, Larry

1998-08-01

All current concepts for the NGST are innovative designs which present unique systems-level challenges. The goals are to outperform existing observatories at a fraction of the current price/performance ratio. Standard practices for developing systems error budgets, such as the 'root-sum-of- squares' error tree, are insufficient for designs of this complexity. Simulation and optimization are the tools needed for this project; in particular tools that integrate controls, optics, thermal and structural analysis, and design optimization. This paper describes such an environment which allows sub-system performance specifications to be analyzed parametrically, and includes optimizing metrics that capture the science requirements. The resulting systems-level design trades are greatly facilitated, and significant cost savings can be realized. This modeling environment, built around a tightly integrated combination of commercial off-the-shelf and in-house- developed codes, provides the foundation for linear and non- linear analysis on both the time and frequency-domains, statistical analysis, and design optimization. It features an interactive user interface and integrated graphics that allow highly-effective, real-time work to be done by multidisciplinary design teams. For the NGST, it has been applied to issues such as pointing control, dynamic isolation of spacecraft disturbances, wavefront sensing and control, on-orbit thermal stability of the optics, and development of systems-level error budgets. In this paper, results are presented from parametric trade studies that assess requirements for pointing control, structural dynamics, reaction wheel dynamic disturbances, and vibration isolation. These studies attempt to define requirements bounds such that the resulting design is optimized at the systems level, without attempting to optimize each subsystem individually. The performance metrics are defined in terms of image quality, specifically centroiding error and RMS wavefront error, which directly links to science requirements.

The Analysis of Reading Skills and Visual Perception Levels of First Grade Turkish Students

ERIC Educational Resources Information Center

Memis, Aysel; Sivri, Diler Ayvaz

2016-01-01

In this study, primary school first grade students' reading skills and visual perception levels were investigated. Sample of the study, which was designed with relational scanning model, consisted of 168 first grade students studying at three public primary schools in Kozlu, Zonguldak, in 2013-2014 education year. Students' reading level, reading…

A Study to Design, Develop, Implement, Evaluate, and Revise Specific, Measurable Performance Objectives to Serve as a Model to Individualize Instruction for Secondary Schools. Final Report.

ERIC Educational Resources Information Center

Wendt, Marilynn S.; Jacobson, Marjory E.

Specific objectives of this two-phase study included: (1) assessment of design of the behavioral objectives in all secondary level courses; (2) construction of criteria for evaluation of the design; (3) testing of objectives against the evaluative criteria and/or the specifications of the curriculum design; and (4) determination of the validity of…

Engaging Sustainability Good Practice within the Curriculum Design and Property Portfolio in the Australian Higher Education Sector

ERIC Educational Resources Information Center

Poon, Joanna

2017-01-01

Purpose: The purpose of this paper is to evaluate the extent to which universities' strategic plans affect the level of incorporation of sustainability within the curriculum design and property portfolio. Design/Methodology/Approach: This research adopted a case study approach. The case study institution was Deakin University in Australia. This…

A Comparison of Methods to Test for Mediation in Multisite Experiments

ERIC Educational Resources Information Center

Pituch, Keenan A.; Whittaker, Tiffany A.; Stapleton, Laura M.

2005-01-01

A Monte Carlo study extended the research of MacKinnon, Lockwood, Hoffman, West, and Sheets (2002) for single-level designs by examining the statistical performance of four methods to test for mediation in a multilevel experimental design. The design studied was a two-group experiment that was replicated across several sites, included a single…

Refining a Competency Model for Instructional Designers in the Context of Online Higher Education

ERIC Educational Resources Information Center

Park, Jae-Young; Luo, Heng

2017-01-01

This study investigates the instructional designers (IDs) competencies essential for the context of online higher education, and has selected an instruction design unit in a research university as a case of investigation. To identify and compare IDs competencies at organizational and individual levels, this study employed a mixed method to collect…

76 FR 38658 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

.... One question related to the test DTC advertisements to be used in the study. (Response) We agree that... level (from smallest to largest effect) will be manipulated in one design, and the risk level (from...) demonstrates that information presented with section headings, graphics (such as bullets), and other design...

Networking and Managers' Career Success in the Malaysian Public Sector: The Moderating Effect of Managerial Level

ERIC Educational Resources Information Center

Rasdi, Roziah Mohd; Garavan, Thomas N.; Ismail, Maimunah

2012-01-01

Purpose: The purpose of this paper is to investigate how managerial level moderates the relationships between networking behaviours and career success (objective and subjective) in the context of a public sector organisation in Malaysia. Design/methodology/approach: The study utilised a cross-sectional design and investigated these relationships…

Urban permeable pavement system design based on “sponge city” concept

NASA Astrophysics Data System (ADS)

Yu, M. M.; Zhu, J. W.; Gao, W. F.; Xu, D. P.; Zhao, M.

2017-08-01

Based on the “sponge city” concept, to implement the goal of building a city within the city to solve the sponge waterlogging, rational utilization of water resources, reduce water pollution this paper, combined with the city planning level in China, establishes the design system of city road flooding from the macro, medium and micro level, explore the design method of city water permeable pavement system, and has a practical significance the lower flood risk water ecological problems. On the macro level, we established an urban pavement sponge system under the regional ecological pattern by “spot permeable open space - low impact developing rain water road system - catchment area and catchment wetland”. On a medium level, this paper proposed the permeable suitability of pavement and the planning control indicators when combined with urban functional districts to conduct permeable pavement roads plans and controls. On micro level, the paper studied sponge technology design of permeable pavement from road structure, surface material, and other aspects aimed at the pavement permeability requirements.

All-dielectric metamaterial frequency selective surface

NASA Astrophysics Data System (ADS)

Wang, Jun; Qu, Shaobo; Li, Liyang; Wang, Jiafu; Feng, Mingde; Ma, Hua; Du, Hongliang; Xu, Zhuo

Frequency selective surface (FSS) has been extensively studied due to its potential applications in radomes, antenna reflectors, high-impedance surfaces and absorbers. Recently, a new principle of designing FSS has been proposed and mainly studied in two levels. In the level of materials, dielectric materials instead of metallic patterns are capable of achieving more functional performance in FSS design. Moreover, FSSs made of dielectric materials can be used in different extreme environments, depending on their electrical, thermal or mechanical properties. In the level of design principle, the theory of metamaterial can be used to design FSS in a convenient and concise way. In this review paper, we provide a brief summary about the recent progress in all-dielectric metamaterial frequency selective surface (ADM-FSS). The basic principle of designing ADM-FSS is summarized. As significant tools, Mie theory and dielectric resonator (DR) theory are given which illustrate clearly how they are used in the FSS design. Then, several design cases including dielectric particle-based ADM-FSS and dielectric network-based ADM-FSS are introduced and reviewed. After a discussion of these two types of ADM-FSSs, we reviewed the existing fabrication techniques that are used in building the experiment samples. Finally, issues and challenges regarding the rapid fabrication techniques and further development aspects are discussed.

Selection of the initial design for the two-stage continual reassessment method.

PubMed

Jia, Xiaoyu; Ivanova, Anastasia; Lee, Shing M

2017-01-01

In the two-stage continual reassessment method (CRM), model-based dose escalation is preceded by a pre-specified escalating sequence starting from the lowest dose level. This is appealing to clinicians because it allows a sufficient number of patients to be assigned to each of the lower dose levels before escalating to higher dose levels. While a theoretical framework to build the two-stage CRM has been proposed, the selection of the initial dose-escalating sequence, generally referred to as the initial design, remains arbitrary, either by specifying cohorts of three patients or by trial and error through extensive simulations. Motivated by a currently ongoing oncology dose-finding study for which clinicians explicitly stated their desire to assign at least one patient to each of the lower dose levels, we proposed a systematic approach for selecting the initial design for the two-stage CRM. The initial design obtained using the proposed algorithm yields better operating characteristics compared to using a cohort of three initial design with a calibrated CRM. The proposed algorithm simplifies the selection of initial design for the two-stage CRM. Moreover, initial designs to be used as reference for planning a two-stage CRM are provided.

Thinking Design and Pedagogy: An Examination of Five Canadian Post-Secondary Courses in Design Thinking

ERIC Educational Resources Information Center

Donar, Ann

2011-01-01

At the tertiary level today, courses on design thinking can be found in diverse programs in and beyond the realm of traditional design disciplines. Across Canada, design thinking courses feature in communication, culture and information technology, and business and engineering. This paper reports findings from a study that investigated the…

Neural Correlates of Decision-Making Under Ambiguity and Conflict.

PubMed

Pushkarskaya, Helen; Smithson, Michael; Joseph, Jane E; Corbly, Christine; Levy, Ifat

2015-01-01

HIGHLIGHTS We use a simple gambles design in an fMRI study to compare two conditions: ambiguity and conflict.Participants were more conflict averse than ambiguity averse.Ambiguity aversion did not correlate with conflict aversion.Activation in the medial prefrontal cortex correlated with ambiguity level and ambiguity aversion.Activation in the ventral striatum correlated with conflict level and conflict aversion. Studies of decision making under uncertainty generally focus on imprecise information about outcome probabilities ("ambiguity"). It is not clear, however, whether conflicting information about outcome probabilities affects decision making in the same manner as ambiguity does. Here we combine functional magnetic resonance imaging (fMRI) and a simple gamble design to study this question. In this design the levels of ambiguity and conflict are parametrically varied, and ambiguity and conflict gambles are matched on expected value. Behaviorally, participants avoided conflict more than ambiguity, and attitudes toward ambiguity and conflict did not correlate across participants. Neurally, regional brain activation was differentially modulated by ambiguity level and aversion to ambiguity and by conflict level and aversion to conflict. Activation in the medial prefrontal cortex was correlated with the level of ambiguity and with ambiguity aversion, whereas activation in the ventral striatum was correlated with the level of conflict and with conflict aversion. These novel results indicate that decision makers process imprecise and conflicting information differently, a finding that has important implications for basic and clinical research.

Neural Correlates of Decision-Making Under Ambiguity and Conflict

PubMed Central

Pushkarskaya, Helen; Smithson, Michael; Joseph, Jane E.; Corbly, Christine; Levy, Ifat

2015-01-01

HIGHLIGHTS We use a simple gambles design in an fMRI study to compare two conditions: ambiguity and conflict.Participants were more conflict averse than ambiguity averse.Ambiguity aversion did not correlate with conflict aversion.Activation in the medial prefrontal cortex correlated with ambiguity level and ambiguity aversion.Activation in the ventral striatum correlated with conflict level and conflict aversion. Studies of decision making under uncertainty generally focus on imprecise information about outcome probabilities (“ambiguity”). It is not clear, however, whether conflicting information about outcome probabilities affects decision making in the same manner as ambiguity does. Here we combine functional magnetic resonance imaging (fMRI) and a simple gamble design to study this question. In this design the levels of ambiguity and conflict are parametrically varied, and ambiguity and conflict gambles are matched on expected value. Behaviorally, participants avoided conflict more than ambiguity, and attitudes toward ambiguity and conflict did not correlate across participants. Neurally, regional brain activation was differentially modulated by ambiguity level and aversion to ambiguity and by conflict level and aversion to conflict. Activation in the medial prefrontal cortex was correlated with the level of ambiguity and with ambiguity aversion, whereas activation in the ventral striatum was correlated with the level of conflict and with conflict aversion. These novel results indicate that decision makers process imprecise and conflicting information differently, a finding that has important implications for basic and clinical research. PMID:26640434

Case-Crossover Analysis of Air Pollution Health Effects: A Systematic Review of Methodology and Application

PubMed Central

Carracedo-Martínez, Eduardo; Taracido, Margarita; Tobias, Aurelio; Saez, Marc; Figueiras, Adolfo

2010-01-01

Background Case-crossover is one of the most used designs for analyzing the health-related effects of air pollution. Nevertheless, no one has reviewed its application and methodology in this context. Objective We conducted a systematic review of case-crossover (CCO) designs used to study the relationship between air pollution and morbidity and mortality, from the standpoint of methodology and application. Data sources and extraction A search was made of the MEDLINE and EMBASE databases. Reports were classified as methodologic or applied. From the latter, the following information was extracted: author, study location, year, type of population (general or patients), dependent variable(s), independent variable(s), type of CCO design, and whether effect modification was analyzed for variables at the individual level. Data synthesis The review covered 105 reports that fulfilled the inclusion criteria. Of these, 24 addressed methodological aspects, and the remainder involved the design’s application. In the methodological reports, the designs that yielded the best results in simulation were symmetric bidirectional CCO and time-stratified CCO. Furthermore, we observed an increase across time in the use of certain CCO designs, mainly symmetric bidirectional and time-stratified CCO. The dependent variables most frequently analyzed were those relating to hospital morbidity; the pollutants most often studied were those linked to particulate matter. Among the CCO-application reports, 13.6% studied effect modification for variables at the individual level. Conclusions The use of CCO designs has undergone considerable growth; the most widely used designs were those that yielded better results in simulation studies: symmetric bidirectional and time-stratified CCO. However, the advantages of CCO as a method of analysis of variables at the individual level are put to little use. PMID:20356818

Assessment of dynamic effects on aircraft design loads: The landing impact case

NASA Astrophysics Data System (ADS)

Bronstein, Michael; Feldman, Esther; Vescovini, Riccardo; Bisagni, Chiara

2015-10-01

This paper addresses the potential benefits due to a fully dynamic approach to determine the design loads of a mid-size business jet. The study is conducted by considering the fuselage midsection of the DAEDALOS aircraft model with landing impact conditions. The comparison is presented in terms of stress levels between the novel dynamic approach and the standard design practice based on the use of equivalent static loads. The results illustrate that a slight reduction of the load levels can be achieved, but careful modeling of the damping level is needed. Guidelines for an improved load definition are discussed, and suggestions for future research activities are provided.

Multi-fuel rotary engine for general aviation aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, on advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed.

Dynamic response analysis of a 24-story damped steel structure

NASA Astrophysics Data System (ADS)

Feng, Demin; Miyama, Takafumi

2017-10-01

In Japanese and Chinese building codes, a two-stage design philosophy, damage limitation (small earthquake, Level 1) and life safety (extreme large earthquake, Level 2), is adopted. It is very interesting to compare the design method of a damped structure based on the two building codes. In the Chinese code, in order to be consistent with the conventional seismic design method, the damped structure is also designed at the small earthquake level. The effect of damper systems is considered by the additional damping ratio concept. The design force will be obtained from the damped design spectrum considering the reduction due to the additional damping ratio. The additional damping ratio by the damper system is usually calculated by a time history analysis method at the small earthquake level. The velocity dependent type dampers such as viscous dampers can function well even in the small earthquake level. But, if steel damper is used, which usually remains elastic in the small earthquake, there will be no additional damping ratio achieved. On the other hand, a time history analysis is used in Japan both for small earthquake and extreme large earthquake level. The characteristics of damper system and ductility of the structure can be modelled well. An existing 24-story steel frame is modified to demonstrate the design process of the damped structure based on the two building codes. Viscous wall type damper and low yield steel panel dampers are studied as the damper system.

Regulation of drainage canals on the groundwater level in a typical coastal wetlands

NASA Astrophysics Data System (ADS)

Liu, Qiang; Mou, Xia; Cui, Baoshan; Ping, Fan

2017-12-01

Activities related to reclamation alter wetland hydrological regimes and inevitably cause changes to groundwater level, which can result in the ecological degradation of coastal wetlands. Decreasing the groundwater level by the construction of drainage canals is an approach that has been widely used to control levels of root zone soil salinity as well as to protect freshwater wetlands or to expand agricultural land area in coastal wetlands. In this study, we assessed the influences of different drainage canal designs on the groundwater level using the Visual MODFLOW (VMOD) interface. We also provided an optimized drainage canal design suitable for the Yellow River Delta (YRD). Results showed that: (i) the groundwater level decreased in areas close to drainage canals, while only negligible effects were found on the groundwater level in areas with no drainage canals; (ii) the influence of drainage canals on the groundwater level decreased as distance increased; and (iii) a drainage canal network design of a depth of 5 m, with canal configuration of north-south direction and canal spacing of 1000 m was more effective in reducing the groundwater level in the study area. Our findings indicated that changes in groundwater level by the construction of drainage canals could help in our understanding of how groundwater influences freshwater wetlands and also aid in maintaining the integrity of coastal wetlands.

Designing clinical trials for amblyopia

PubMed Central

Holmes, Jonathan M.

2015-01-01

Randomized clinical trial (RCT) study design leads to one of the highest levels of evidence, and is a preferred study design over cohort studies, because randomization reduces bias and maximizes the chance that even unknown confounding factors will be balanced between treatment groups. Recent randomized clinical trials and observational studies in amblyopia can be taken together to formulate an evidence-based approach to amblyopia treatment, which is presented in this review. When designing future clinical studies of amblyopia treatment, issues such as regression to the mean, sample size and trial duration must be considered, since each may impact study results and conclusions. PMID:25752747

Trends in Contemporary Holistic Nursing Research: 2010-2015.

PubMed

Delaney, Colleen; McCaffrey, Ruth G; Barrere, Cynthia; Kenefick Moore, Amy; Dunn, Dorothy J; Miller, Robin J; Molony, Sheila L; Thomas, Debra; Twomey, Teresa C; Susan Zhu, Xiaoyuan

2018-01-01

The purpose of this study was to describe and summarize the characteristics of contemporary holistic nursing research (HNR) published nationally. A descriptive research design was used for this study. Data for this study came from a consecutive sample of 579 studies published in six journals determined as most consistent with the scope of holistic nursing from 2010 to 2015. The Johns Hopkins level of evidence was used to identify evidence generated, and two criteria-power analysis for quantitative research and trustworthiness for qualitative research-were used to describe overall quality of HNR. Of the studies, 275 were considered HNR and included in the analysis. Caring, energy therapies, knowledge and attitudes, and spirituality were the most common foci, and caring/healing, symptom management, quality of life, and depression were the outcomes most often examined. Of the studies, 56% were quantitative, 39% qualitative, and 5% mixed-methods designs. Only 32% of studies were funded. Level III evidence (nonexperimental, qualitative) was the most common level of evidence generated. Findings from this study suggest ways in which holistic nurse researchers can strengthen study designs and thus improve the quality of scientific evidence available for application into practice and improve health outcomes.

Designing a Gamified Online Course: A Preliminary Case Study

ERIC Educational Resources Information Center

Grabowski, Jeremiah Stanley

2017-01-01

This exploratory case study delves into the instructional design of a gamified online course. The study focuses on how the professor incorporated game elements into a graduate-level online course. Participants in the gamified course were pre- and in-service mathematics teachers. The qualitative case study used two sources of data, an interview…

Impact of Leveled Reading Books on the Fluency and Comprehension Levels of First Grade Students

ERIC Educational Resources Information Center

Seals, Melissa Paige

2013-01-01

The purpose of this nonequivalent, control group, pretest-posttest design study was to evaluate the effectiveness of leveled book programs on first-grade students' oral reading fluency rates and comprehension levels. This study was conducted over a 10-week time span with four first-grade classes. All of the students in each class were given a…

Preliminary design studies of an advanced general aviation aircraft

NASA Technical Reports Server (NTRS)

Barrett, Ron; Demoss, Shane; Dirkzwager, AB; Evans, Darryl; Gomer, Charles; Keiter, Jerry; Knipp, Darren; Seier, Glen; Smith, Steve; Wenninger, ED

1991-01-01

The preliminary design results are presented of the advanced aircraft design project. The goal was to take a revolutionary look into the design of a general aviation aircraft. Phase 1 of the project included the preliminary design of two configurations, a pusher, and a tractor. Phase 2 included the selection of only one configuration for further study. The pusher configuration was selected on the basis of performance characteristics, cabin noise, natural laminar flow, and system layouts. The design was then iterated to achieve higher levels of performance.

Product design for energy reduction in concurrent engineering: An Inverted Pyramid Approach

NASA Astrophysics Data System (ADS)

Alkadi, Nasr M.

Energy factors in product design in concurrent engineering (CE) are becoming an emerging dimension for several reasons; (a) the rising interest in "green design and manufacturing", (b) the national energy security concerns and the dramatic increase in energy prices, (c) the global competition in the marketplace and global climate change commitments including carbon tax and emission trading systems, and (d) the widespread recognition of the need for sustainable development. This research presents a methodology for the intervention of energy factors in concurrent engineering product development process to significantly reduce the manufacturing energy requirement. The work presented here is the first attempt at integrating the design for energy in concurrent engineering framework. It adds an important tool to the DFX toolbox for evaluation of the impact of design decisions on the product manufacturing energy requirement early during the design phase. The research hypothesis states that "Product Manufacturing Energy Requirement is a Function of Design Parameters". The hypothesis was tested by conducting experimental work in machining and heat treating that took place at the manufacturing lab of the Industrial and Management Systems Engineering Department (IMSE) at West Virginia University (WVU) and at a major U.S steel manufacturing plant, respectively. The objective of the machining experiment was to study the effect of changing specific product design parameters (Material type and diameter) and process design parameters (metal removal rate) on a gear head lathe input power requirement through performing defined sets of machining experiments. The objective of the heat treating experiment was to study the effect of varying product charging temperature on the fuel consumption of a walking beams reheat furnace. The experimental work in both directions have revealed important insights into energy utilization in machining and heat-treating processes and its variance based on product, process, and system design parameters. In depth evaluation to how the design and manufacturing normally happen in concurrent engineering provided a framework to develop energy system levels in machining within the concurrent engineering environment using the method of "Inverted Pyramid Approach", (IPA). The IPA features varying levels of output energy based information depending on the input design parameters that is available during each stage (level) of the product design. The experimental work, the in-depth evaluation of design and manufacturing in CE, and the developed energy system levels in machining provided a solid base for the development of the model for the design for energy reduction in CE. The model was used to analyze an example part where 12 evolving designs were thoroughly reviewed to investigate the sensitivity of energy to design parameters in machining. The model allowed product design teams to address manufacturing energy concerns early during the design stage. As a result, ranges for energy sensitive design parameters impacting product manufacturing energy consumption were found in earlier levels. As designer proceeds to deeper levels in the model, this range tightens and results in significant energy reductions.

Physical Fitness Index for Assess Fitness Speed Among Army Reserve Officer Training Unit Cadet in Malaysia

NASA Astrophysics Data System (ADS)

Rustam, Shahrulfadly; Kassim, Mohar

2018-05-01

The aim of this study is to develop physical fitness index (PFI) for physical fitness among Army Reserve Officer Training Unit Cadet Malaysia. This study use 30 meter speed run as a physical fitness test battery to develop physical fitness index (PFI) and to evaluate the subject fitness speed. 212 male respondent (N=212) was selected in this study including Army Reserve Officer Training Unit Cadet of National Defence University of Malaysia. 30 meter sprint was used as a instrument for this study. The methodology will be adopted for this study is quantitative research in the form of a quasi-experiment. Quasi-experimental methods is used to measure and evaluate the level of physical fitness and develop Physical Fitness Index especially in speed. The design of this study is quasi-experimental study design with pre-test and post-test. The study design is quasi-experimental research design in which the data is obtained through the practical test in the field. The data were analysed by using the SPSS software version 20 to calculate the mean, standard deviation and t-test for develop physical fitness index (PFI) and to evaluate the fitness speed level for Army Reserve Officers Training Unit Cadet Malaysia. The findings showed mean and standard deviation for develope physical fitness index is (M=4.84) and (SD=0.48). The t-test for evaluate fitness level in speed for pre-test and post-test is significantly difference (p ≤ 0.05). The implication at this study is that the develope of standard physical fitness index is able to identify the level of physical fitness among Army Reserve Officer Training Unit Cadet Malaysia.

Achieving integration in mixed methods designs-principles and practices.

PubMed

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.

Conceptual design study of 1985 commercial tilt rotor transports. Volume 1: VTOL design summary

NASA Technical Reports Server (NTRS)

Detore, J. A.; Sambell, K. W.

1975-01-01

Aircraft were synthesized in the 21-, 45-, and 100- passenger categories. Technological factors were considered and the 45-passenger point design, designated the D312, was selected. Variants of the D312 having sideline noise levels in hover of + or - 5 PNdB were also studied. All three 45-passenger aircraft were analyzed for performance, weights, economics, handling qualities, noise footprints, aeroelastic stability and ride comfort. Results are presented.

Lean, Premixed-Prevaporized (LPP) combustor conceptual design study

NASA Technical Reports Server (NTRS)

Dickman, R. A.; Dodds, W. J.; Ekstedt, E. E.

1979-01-01

Four combustion systems were designed and sized for the energy efficient engine. A fifth combustor was designed for the cycle and envelope of the twin-spool, high bypass ratio, high pressure ratio turbofan engine. Emission levels, combustion performance, life, and reliability assessments were made for these five combustion systems. Results of these design studies indicate that cruise NOx emission can be reduced by the use of lean, premixed-prevaporaized combustion and airflow modulation.

Employee Trust in Supervisors and Affective Commitment: The Moderating Role of Authentic Leadership.

PubMed

Xiong, Kehan; Lin, Weipeng; Li, Jenny C; Wang, Lei

2016-06-01

Although previous research has examined the main/direct effects of subordinates' trust in their supervisors on the levels of subordinates' affective commitment towards the organizations, little attention has been paid to explore the boundary conditions of this relationship. Two studies were conducted to examine the moderating effect of authentic leadership on the relationship between subordinates' trust in supervisor and their levels of affective commitment towards the organization. In line with the hypothesized model, both Study 1 (cross-sectional design, n = 138) and Study 2 (lagged design, n = 154) demonstrated that authentic leadership moderated the relationship between employees' trust in supervisor and their levels of affective commitment towards their organizations. Specifically, the positive relationship was stronger for employees under higher levels of authentic leadership. The implications for theory and practice are discussed. © The Author(s) 2016.

A Top-Down Approach to Designing the Computerized Adaptive Multistage Test

ERIC Educational Resources Information Center

Luo, Xiao; Kim, Doyoung

2018-01-01

The top-down approach to designing a multistage test is relatively understudied in the literature and underused in research and practice. This study introduced a route-based top-down design approach that directly sets design parameters at the test level and utilizes the advanced automated test assembly algorithm seeking global optimality. The…

Community Design for Optimal Energy and Resource Utilization.

ERIC Educational Resources Information Center

Bilenky, Stephen; And Others

Presented is a study which investigated the energy and resource dynamics of a semi-autonomous domestic system for 30 people. The investigation is organized on three levels: (1) developing a preliminary design and design parameters; (2) development and quantification of the energy and resource dynamics; and (3) designing a model to extrapolate…

Time-Structured and Net Intraindividual Variability: Tools for Examining the Development of Dynamic Characteristics and Processes

PubMed Central

Ram, Nilam; Gerstorf, Denis

2009-01-01

The study of intraindividual variability is the study of fluctuations, oscillations, adaptations, and “noise” in behavioral outcomes that manifest on micro-time scales. This paper provides a descriptive frame for the combined study of intraindividual variability and aging/development. At the conceptual level, we highlight that the study of intraindividual variability provides access to dynamic characteristics – construct-level descriptions of individuals' capacities for change (e.g., lability), and dynamic processes – the systematic changes individuals' exhibit in response to endogenous and exogenous influences (e.g., regulation). At the methodological level, we review how quantifications of net intraindividual variability (e.g., iSD) and models of time-structured intraindividual variability (e.g., time-series) are being used to measure and describe dynamic characteristics and processes. At the research design level, we point to the benefits of measurement burst study designs, wherein data are obtained across multiple time scales, for the study of development. PMID:20025395

Middle-Level Secondary School Leaders: Potential, Constraints and Implications for Leadership Preparation and Development

ERIC Educational Resources Information Center

Gurr, David; Drysdale, Lawrie

2013-01-01

Purpose: The aim of this paper is to bring together for the first time three studies of middle-level leaders in secondary schools in Victoria, Australia. The studies span more than a decade and allow consideration of the progress in developing middle-level leadership roles. Design/methodology/approach: All studies followed a consistent approach…

Preliminary design and analysis of an advanced rotorcraft transmission

NASA Technical Reports Server (NTRS)

Henry, Z. S.

1990-01-01

Future rotorcraft transmissions of the 1990s and beyond the year 2000 require the incorporation of key emerging material and component technologies using advanced and innovative design practices in order to meet the requirements for a reduced weight-to-power ratio, a decreased noise level, and a substantially increased reliability. The specific goals for future rotocraft transmissions when compared with current state-of-the-art transmissions are a 25 percent weight reduction, a 10-dB reduction in the transmitted noise level, and a system reliability of 5000 hours mean-time-between-removal for the transmission. This paper presents the results of the design studies conducted to meet the stated goals for an advanced rotorcraft transmission. These design studies include system configuration, planetary gear train selection, and reliability prediction methods.

The Influence of Game Design on the Collaborative Problem Solving Process: A Cross-Case Study of Multi-Player Collaborative Gameplay Analysis

ERIC Educational Resources Information Center

Yildirim, Nilay

2013-01-01

This cross-case study examines the relationships between game design attributes and collaborative problem solving process in the context of multi-player video games. The following game design attributes: sensory stimuli elements, level of challenge, and presentation of game goals and rules were examined to determine their influence on game…

The Net-Generation Interior Design Student: An Exploratory Study Assessing Learning and Engagement within a Computer Simulation Environment

ERIC Educational Resources Information Center

Peterson, Julie Ellen

2009-01-01

The first purpose of this experimental study was to determine if there were effects on achievement between traditional pencil-and-paper instructional strategies and computer simulated instructional strategies used to teach interior design business ethics. The second purpose was to determine the level of engagement of interior design students using…

Development of Metacognitive Skills: Designing Problem-Based Experiment with Prospective Science Teachers in Biology Laboratory

ERIC Educational Resources Information Center

Denis Çeliker, Huriye

2015-01-01

The purpose of this study is to investigate the effect of designing problem-based experiments (DPBE) on the level of metacognitive skills of prospective science teachers. For this purpose, pre test-post test design, without control group, was used in the research. The research group of the study comprised 113 second-grade prospective science…

Statistical methods for efficient design of community surveys of response to noise: Random coefficients regression models

NASA Technical Reports Server (NTRS)

Tomberlin, T. J.

1985-01-01

Research studies of residents' responses to noise consist of interviews with samples of individuals who are drawn from a number of different compact study areas. The statistical techniques developed provide a basis for those sample design decisions. These techniques are suitable for a wide range of sample survey applications. A sample may consist of a random sample of residents selected from a sample of compact study areas, or in a more complex design, of a sample of residents selected from a sample of larger areas (e.g., cities). The techniques may be applied to estimates of the effects on annoyance of noise level, numbers of noise events, the time-of-day of the events, ambient noise levels, or other factors. Methods are provided for determining, in advance, how accurately these effects can be estimated for different sample sizes and study designs. Using a simple cost function, they also provide for optimum allocation of the sample across the stages of the design for estimating these effects. These techniques are developed via a regression model in which the regression coefficients are assumed to be random, with components of variance associated with the various stages of a multi-stage sample design.

Ethiopian New Public Universities: Achievements, Challenges and Illustrative Case Studies

ERIC Educational Resources Information Center

van Deuren, Rita; Kahsu, Tsegazeab; Mohammed, Seid; Woldie, Wondimu

2016-01-01

Purpose: This paper aims to analyze and illustrate achievements and challenges of Ethiopian higher education, both at the system level and at the level of new public universities. Design/methodology/approach: Achievements and challenges at the system level are based on literature review and secondary data. Illustrative case studies are based on…

Insights on ornithine decarboxylase silencing as a potential strategy for targeting retinoblastoma.

PubMed

Muthukumaran, Sivashanmugam; Bhuvanasundar, Renganathan; Umashankar, Vetrivel; Sulochana, K N

2018-02-01

Ornithine Decarboxylase (ODC) is a key enzyme involved in polyamine synthesis and is reported to be up regulated in several cancers. However, the effect of ODC gene silencing in retinoblastoma is to be understood for utilization in therapeutic applications. Hence, in this study, a novel siRNA (small interference RNA) targeting ODC was designed and validated in Human Y79 retinoblastoma cells for its effects on intracellular polyamine levels, Matrix Metalloproteinase 2 & 9 activity and Cell cycle. The designed siRNA showed efficient silencing of ODC mRNA expression and protein levels in Y79 cells. It also showed significant reduction of intracellular polyamine levels and altered levels of oncogenic LIN28b expression. By this study, a regulatory loop is proposed, wherein, ODC silencing in Y79 cells to result in decreased polyamine levels, thereby, leading to altered protein levels of Lin28b, MMP-2 and MMP-9, which falls in line with earlier studies in neuroblastoma. Thus, by this study, we propose ODC silencing as a prospective strategy for targeting retinoblastoma. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Demand for Agricultural Extension Services among Small-Scale Maize Farmers: Micro-Level Evidence from Kenya

ERIC Educational Resources Information Center

Gido, Eric O.; Sibiko, Kenneth W.; Ayuya, Oscar I.; Mwangi, Joseph K.

2015-01-01

Purpose: The objective of the study was to determine the level and determinants of demand for extension services among small-scale maize farmers in Kenya. Design/methodology/approach: Based on an exploratory research design, primary data were collected from a sample of 352 households through face-to-face interviews. Focus group discussions were…

Effects of experimental design and protein substitution strategy on production responses to feeding different levels of protein to primiparous dairy cows

USDA-ARS?s Scientific Manuscript database

Inferences about lactation responses to diet have been hypothesized to be affected by the use of change-over instead of continuous experimental designs. A direct test of this hypothesis has not been well studied. Additionally, when dietary protein level is changed it must occur through dilution with...

The Effect of Using the Creative Reversal Act in Science Education on Middle School Students' Creativity Levels

ERIC Educational Resources Information Center

Karaca, Tulin; Koray, Ozlem

2017-01-01

Purpose: The purpose of this study is to examine the effects of the creative reversal act (CREACT) used in teaching ecosystems topics on the creativity levels of middle school students. Research Methods: The research was conducted using a quasi-experimental design, a quantitative research method, and a pretest-posttest control group design. The…

Development of Artistic Perception in Students of Graphic Design: A Preliminary Report.

ERIC Educational Resources Information Center

Hanson, Glenn

This study is an attempt to determine what level of artistic perception or art taste is brought into the classroom by students in schools of journalism and whether it can be demonstrated that design instruction can raise the level of artistic perception among journalism and advertising students. It was hypothesized that women would score higher in…

Cutting-Edge Panacea of the Twenty-First Century: Workplace Spirituality for Higher Education Human Resources

ERIC Educational Resources Information Center

Khasawneh, Samer

2011-01-01

Purpose: The primary purpose of this study is to determine the level of spirituality in the workplace for faculty members at public universities in Jordan. Design/methodology/approach: The paper uses a survey design as the basis for the research. Findings: The results indicate that participants perceived an overall moderate-to-high level of…

Estimating the intra-cluster correlation coefficient for evaluating an educational intervention program to improve rabies awareness and dog bite prevention among children in Sikkim, India: A pilot study.

PubMed

Auplish, Aashima; Clarke, Alison S; Van Zanten, Trent; Abel, Kate; Tham, Charmaine; Bhutia, Thinlay N; Wilks, Colin R; Stevenson, Mark A; Firestone, Simon M

2017-05-01

Educational initiatives targeting at-risk populations have long been recognized as a mainstay of ongoing rabies control efforts. Cluster-based studies are often utilized to assess levels of knowledge, attitudes and practices of a population in response to education campaigns. The design of cluster-based studies requires estimates of intra-cluster correlation coefficients obtained from previous studies. This study estimates the school-level intra-cluster correlation coefficient (ICC) for rabies knowledge change following an educational intervention program. A cross-sectional survey was conducted with 226 students from 7 schools in Sikkim, India, using cluster sampling. In order to assess knowledge uptake, rabies education sessions with pre- and post-session questionnaires were administered. Paired differences of proportions were estimated for questions answered correctly. A mixed effects logistic regression model was developed to estimate school-level and student-level ICCs and to test for associations between gender, age, school location and educational level. The school- and student-level ICCs for rabies knowledge and awareness were 0.04 (95% CI: 0.01, 0.19) and 0.05 (95% CI: 0.2, 0.09), respectively. These ICCs suggest design effect multipliers of 5.45 schools and 1.05 students per school, will be required when estimating sample sizes and designing future cluster randomized trials. There was a good baseline level of rabies knowledge (mean pre-session score 71%), however, key knowledge gaps were identified in understanding appropriate behavior around scared dogs, potential sources of rabies and how to correctly order post rabies exposure precaution steps. After adjusting for the effect of gender, age, school location and education level, school and individual post-session test scores improved by 19%, with similar performance amongst boys and girls attending schools in urban and rural regions. The proportion of participants that were able to correctly order post-exposure precautionary steps following educational intervention increased by 87%. The ICC estimates presented in this study will aid in designing cluster-based studies evaluating educational interventions as part of disease control programs. This study demonstrates the likely benefits of educational intervention incorporating bite prevention and rabies education. Copyright © 2017 Elsevier B.V. All rights reserved.

Blackcomb: Hardware-Software Co-design for Non-Volatile Memory in Exascale Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schreiber, Robert

Summary of technical results of Blackcomb Memory Devices We explored various different memory technologies (STTRAM, PCRAM, FeRAM, and ReRAM). The progress can be classified into three categories, below. Modeling and Tool Releases Various modeling tools have been developed over the last decade to help in the design of SRAM or DRAM-based memory hierarchies. To explore new design opportunities that NVM technologies can bring to the designers, we have developed similar high-level models for NVM, including PCRAMsim [Dong 2009], NVSim [Dong 2012], and NVMain [Poremba 2012]. NVSim is a circuit-level model for NVM performance, energy, and area estimation, which supports variousmore » NVM technologies, including STT-RAM, PCRAM, ReRAM, and legacy NAND Flash. NVSim is successfully validated against industrial NVM prototypes, and it is expected to help boost architecture-level NVM-related studies. On the other side, NVMain is a cycle accurate main memory simulator designed to simulate emerging nonvolatile memories at the architectural level. We have released these models as open source tools and provided contiguous support to them. We also proposed PS3-RAM, which is a fast, portable and scalable statistical STT-RAM reliability analysis model [Wen 2012]. Design Space Exploration and Optimization With the support of these models, we explore different device/circuit optimization techniques. For example, in [Niu 2012a] we studied the power reduction technique for the application of ECC scheme in ReRAM designs and proposed to use ECC code to relax the BER (Bit Error Rate) requirement of a single memory to improve the write energy consumption and latency for both 1T1R and cross-point ReRAM designs. In [Xu 2011], we proposed a methodology to design STT-RAM for different optimization goals such as read performance, write performance and write energy by leveraging the trade-off between write current and write time of MTJ. We also studied the tradeoffs in building a reliable crosspoint ReRAM array [Niu 2012b]. We have conducted an in depth analysis of the circuit and system level design implications of multi-layer cross-point Resistive RAM (MLCReRAM) from performance, power and reliability perspectives [Xu 2013]. The objective of this study is to understand the design trade-offs of this technology with respect to the MLC Phase Change Memory (MLCPCM).Our MLC ReRAM design at the circuit and system levels indicates that different resistance allocation schemes, programming strategies, peripheral designs, and material selections profoundly affect the area, latency, power, and reliability of MLC ReRAM. Based on this analysis, we conduct two case studies: first we compare MLC ReRAM design against MLC phase-change memory (PCM) and multi-layer cross-point ReRAM design, and point out why multi-level ReRAM is appealing; second we further explore the design space for MLC ReRAM. Architecture and Application We explored hybrid checkpointing using phase-change memory for future exascale systems [Dong 2011] and showed that the use of nonvolatile memory for local checkpointing significantly increases the number of faults covered by local checkpoints and reduces the probability of a global failure in the middle of a global checkpoint to less than 1%. We also proposed a technique called i2WAP to mitigate the write variations in NVM-based last-level cache for the improvement of the NVM lifetime [Wang 2013]. Our wear leveling technique attempts to work around the limitations of write endurance by arranging data access so that write operations can be distributed evenly across all the storage cells. During our intensive research on fault-tolerant NVM design, we found that ECC cannot effectively tolerate hard errors from limited write endurance and process imperfection. Therefore, we devised a novel Point and Discard (PAD) architecture in in [ 2012] as a hard-error-tolerant architecture for ReRAM-based Last Level Caches. PAD improves the lifetime of ReRAM caches by 1.6X-440X under different process variations without performance overhead in the system's early life. We have investigated the applicability of NVM for persistent memory design [Zhao 2013]. New byte addressable NVM enables fast persistent memory that allows in-memory persistent data objects to be updated with much higher throughput. Despite the significant improvement, the performance of these designs is only 50% of the native system with no persistence support, due to the logging or copy-on-write mechanisms used to update the persistent memory. A challenge in this approach is therefore how to efficiently enable atomic, consistent, and durable updates to ensure data persistence that survives application and/or system failures. We have designed a persistent memory system, called Klin, that can provide performance as close as that of the native system. The Klin design adopts a non-volatile cache and a non-volatile main memory for constructing a multi-versioned durable memory system, enabling atomic updates without logging or copy-on-write. Our evaluation shows that the proposed Kiln mechanism can achieve up to 2X of performance improvement to NVRAM-based persistent memory employing write-ahead logging. In addition, our design has numerous practical advantages: a simple and intuitive abstract interface, microarchitecture-level optimizations, fast recovery from failures, and no redundant writes to slow non-volatile storage media. The work was published in MICRO 2013 and received Best Paper Honorable Mentioned Award.« less

Investigation of High-Level Synthesis tools’ applicability to data acquisition systems design based on the CMS ECAL Data Concentrator Card example

NASA Astrophysics Data System (ADS)

HUSEJKO, Michal; EVANS, John; RASTEIRO DA SILVA, Jose Carlos

2015-12-01

High-Level Synthesis (HLS) for Field-Programmable Logic Array (FPGA) programming is becoming a practical alternative to well-established VHDL and Verilog languages. This paper describes a case study in the use of HLS tools to design FPGA-based data acquisition systems (DAQ). We will present the implementation of the CERN CMS detector ECAL Data Concentrator Card (DCC) functionality in HLS and lessons learned from using HLS design flow. The DCC functionality and a definition of the initial system-level performance requirements (latency, bandwidth, and throughput) will be presented. We will describe how its packet processing control centric algorithm was implemented with VHDL and Verilog languages. We will then show how the HLS flow could speed up design-space exploration by providing loose coupling between functions interface design and functions algorithm implementation. We conclude with results of real-life hardware tests performed with the HLS flow-generated design with a DCC Tester system.

The 1990-1991 project summaries

NASA Technical Reports Server (NTRS)

1991-01-01

The Mechanical Engineering Department at The University of Texas at Austin participated in the NASA/USRA University Advanced Design Program on both an undergraduate and a graduate level during the 1990-91 academic year. The focus of study was on four design projects that fall into one of the following areas: (1) the establishment of a lunar base and (2) mission planet Earth. The design projects were incorporated into already existing design courses and students worked together in groups of three to five. A background of each area of study is provided, along with synopses, conclusions, and recommendations for further study for each design project.

System Noise Assessment of Blended-Wing-Body Aircraft With Open Rotor Propulsion

NASA Technical Reports Server (NTRS)

Guo, Yueping; Thomas, Russell H.

2015-01-01

An aircraft system noise study is presented for the Blended-Wing-Body (BWB) aircraft concept with three open rotor engines mounted on the upper surface of the airframe. It is shown that for such an aircraft, the cumulative Effective Perceived Noise Level (EPNL) is about 24 dB below the current aircraft noise regulations of Stage 4. While this makes the design acoustically viable in meeting the regulatory requirements, even with the consideration of more stringent noise regulations of a possible Stage 5 in the next decade or so, the design will likely meet stiff competitions from aircraft with turbofan engines. It is shown that the noise levels of the BWB design are held up by the inherently high noise levels of the open rotor engines and the limitation on the shielding benefit due to the practical design constraint on the engine location. Furthermore, it is shown that the BWB design has high levels of noise from the main landing gear, due to their exposure to high speed flow at the junction between the center body and outer wing. These are also the reasons why this baseline BWB design does not meet the NASA N+2 noise goal of 42 dB below Stage 4. To identify approaches that may further reduce noise, parametric studies are also presented, including variations in engine location, vertical tail and elevon variations, and airframe surface acoustic liner treatment effect. These have the potential to further reduce noise but they are only at the conceptual stage.

Operations analysis (study 2.1). Payload designs for space servicing, addendum

NASA Technical Reports Server (NTRS)

Wolfe, R. R.

1974-01-01

Space replaceable units and payload configurations are revised to reflect increased levels of redundancy to be more consistent with current design practices. A reassessment of expendable payload design reliabilities was performed to provide a common basis for comparison with space serviceable configurations.

Topology Optimization using the Level Set and eXtended Finite Element Methods: Theory and Applications

NASA Astrophysics Data System (ADS)

Villanueva Perez, Carlos Hernan

Computational design optimization provides designers with automated techniques to develop novel and non-intuitive optimal designs. Topology optimization is a design optimization technique that allows for the evolution of a broad variety of geometries in the optimization process. Traditional density-based topology optimization methods often lack a sufficient resolution of the geometry and physical response, which prevents direct use of the optimized design in manufacturing and the accurate modeling of the physical response of boundary conditions. The goal of this thesis is to introduce a unified topology optimization framework that uses the Level Set Method (LSM) to describe the design geometry and the eXtended Finite Element Method (XFEM) to solve the governing equations and measure the performance of the design. The methodology is presented as an alternative to density-based optimization approaches, and is able to accommodate a broad range of engineering design problems. The framework presents state-of-the-art methods for immersed boundary techniques to stabilize the systems of equations and enforce the boundary conditions, and is studied with applications in 2D and 3D linear elastic structures, incompressible flow, and energy and species transport problems to test the robustness and the characteristics of the method. A comparison of the framework against density-based topology optimization approaches is studied with regards to convergence, performance, and the capability to manufacture the designs. Furthermore, the ability to control the shape of the design to operate within manufacturing constraints is developed and studied. The analysis capability of the framework is validated quantitatively through comparison against previous benchmark studies, and qualitatively through its application to topology optimization problems. The design optimization problems converge to intuitive designs and resembled well the results from previous 2D or density-based studies.

LCLS-II 1.3 GHz cryomodule design - lessons learned from testing at Fermilab

NASA Astrophysics Data System (ADS)

Kaluzny, J.; Hurd, J.; Orlov, Y.; He, Y.; Bossert, R.; Grimm, C.; Schappert, W.; Atassi, O. Al; Wang, R.; Arkan, T.; Theilacker, J.; Klebaner, A.; White, M.; Wu, G.; Makara, J.; Ginsburg, C.; Pei, L.; Holzbauer, J.; Hansen, B.; Stanek, R.; Peterson, T.; Harms, E.

2017-12-01

Fermilab’s 1.3 GHz prototype cryomodule for the Linac Coherent Light Source Upgrade (LCLS-II) has been tested at Fermilab’s Cryomodule Test Facility (CMTF). Aspects of the cryomodule design have been studied and tested. The cooldown circuit was used to quickly cool the cavities through the transition temperature, and a heater on the circuit was used to heat incoming helium for warmup. Due to the 0.5% slope of the cryomodule, the liquid level is not constant along the length of the cryomodule. This slope as well as the pressure profile caused liquid level management to be a challenge. The microphonics levels in the cryomodule were studied and efforts were made to reduce them throughout testing. Some of the design approaches and studies performed on these aspects will be presented. Fermilab is operated by Fermi Research Alliance, LLC under Contract No. De-AC02-07CH11359 with the United States Department of Energy. This work was supported, in part, by the LCLS-II Project.

Robust design of configurations and parameters of adaptable products

NASA Astrophysics Data System (ADS)

Zhang, Jian; Chen, Yongliang; Xue, Deyi; Gu, Peihua

2014-03-01

An adaptable product can satisfy different customer requirements by changing its configuration and parameter values during the operation stage. Design of adaptable products aims at reducing the environment impact through replacement of multiple different products with single adaptable ones. Due to the complex architecture, multiple functional requirements, and changes of product configurations and parameter values in operation, impact of uncertainties to the functional performance measures needs to be considered in design of adaptable products. In this paper, a robust design approach is introduced to identify the optimal design configuration and parameters of an adaptable product whose functional performance measures are the least sensitive to uncertainties. An adaptable product in this paper is modeled by both configurations and parameters. At the configuration level, methods to model different product configuration candidates in design and different product configuration states in operation to satisfy design requirements are introduced. At the parameter level, four types of product/operating parameters and relations among these parameters are discussed. A two-level optimization approach is developed to identify the optimal design configuration and its parameter values of the adaptable product. A case study is implemented to illustrate the effectiveness of the newly developed robust adaptable design method.

Evaluation of the relationship of service levels, functional categories, and design standards for general aviation airports

DOT National Transportation Integrated Search

1999-08-01

This study examines certain airport design standards in an effort to understand the rationale behind their development. Researchers studied the standards to identify potential standards for relaxing. The focus is on smaller, less active airports wher...

Diagnostic Significance of p38 Isoforms (p38α, p38β, p38γ, p38δ) in Head and Neck Squamous Cell Carcinoma: Comparative Serum Level Evaluation and Design of Novel Peptide Inhibitor Targeting the Same.

PubMed

Sahu, Vishal; Nigam, Lokesh; Agnihotri, Vertica; Gupta, Abhishek; Shekhar, Shashank; Subbarao, Naidu; Bhaskar, Suman; Dey, Sharmistha

2018-05-09

The p38 mitogen-activated protein kinase (MAPKs) play a crucial role in the production of pro-inflammatory cytokines and over-expression of it increase cytokines which promote cancer. Among four isoforms, p38α has been well studied in head and neck squamous cell carcinoma (HNSCC) and other cancers as a therapeutic target.p38δ has recently emerged as a potential disease-specific drug target. Elevated serum p38α level in HNSCC was reported earlier from our lab. This study aims to estimate the levels of p38 MAPK-isoforms in the serum of HNSCC and design peptide inhibitor targeting the same. Levels of p38 MAPK isoforms in the serum of HNSCC and healthy controls were quantified by surface plasmon resonance technology. The peptide inhibitor for p38 MAPK was designed by molecular modeling using Grid-based Ligand Docking with Energetics tools and compared with known specific inhibitors. We have observed highly elevated levels of all four isoforms of p38 MAPK in serum of HNSCC patients compared to the control group. Further, serum p38α, p38β, and p38δ levels were down regulated after therapy in follow up patients, while p38γ showed no response to the therapy. Present study screened designed peptide WFYH as a specific inhibitor against p38δ. The specific inhibitor of p38δ was found to have no effect on p38α due to great structural difference at ATP binding pocket. In this study, first time estimated the levels of p38 MAPK isoforms in the serum of HNSCC. It can be concluded that p38 MAPK isoforms can be a diagnostic and prognostic marker for HNSCC and p38δ as a therapeutic target.

The Response of Plant Species to Low-Level trampling Stress on Hurricane Island, Maine

Treesearch

R.E. Leonard; P.W. Conkling; J.L. McMahon; J.L. McMahon

1985-01-01

In 1981, a study was initiated to measure the effects of low-level trampling (100 to 200 tramples) on selected vegetation on Hurricane Island, Maine. Low levels of trampling are representative of general recreational use patterns on most Maine islands. The study was designed to compare percent survival of common island species when subjected to low-level trampling, to...

Level of evidence gap in orthopedic research.

PubMed

Baldwin, Keith D; Bernstein, Joseph; Ahn, Jaimo; McKay, Scott D; Sankar, Wudbhav N

2012-09-01

Level of evidence is the most widely used metric for the quality of a publication, but instances exist in which a Level I study is neither feasible nor desirable. The goal of this study was to evaluate the level of evidence gap in current orthopedic research, which the authors defined as the disparity between the level of evidence that would be required to optimally answer the primary research question and the level of evidence that was actually used. Five orthopedic surgeons (K.D.B., J.B., J.A., S.D.M., W.N.S.) evaluated blinded articles from the first 6 months of 2010 in the Journal of Bone and Joint Surgery (American Volume) (JBJS-Am), classifying the study type and design and extracting a primary research question from each article. Each evaluator then defined the study type and method, along with the level of evidence that would ideally be used to address the primary research question. The level of evidence gap was then calculated by subtracting the actual level of evidence of the manuscript from the level of evidence of the idealized study. Of the 64 JBJS-Am manuscripts eligible for analysis, the average level of evidence was between Level II and III (mean, 2.73). The average level of evidence gap was 1.06 compared with the JBJS-Am-designated level of evidence and 1.28 compared with the evaluators' assessment. Because not all questions require Level I studies, level of evidence alone may not be the best metric for the quality of orthopedic surgery literature. Instead, the authors' concept of a level of evidence gap may be a better tool for assessing the state of orthopedic research publications. Copyright 2012, SLACK Incorporated.

Hybrid propulsion technology program. Volume 1: Conceptional design package

NASA Technical Reports Server (NTRS)

Jensen, Gordon E.; Holzman, Allen L.; Leisch, Steven O.; Keilbach, Joseph; Parsley, Randy; Humphrey, John

1989-01-01

A concept design study was performed to configure two sizes of hybrid boosters; one which duplicates the advanced shuttle rocket motor vacuum thrust time curve and a smaller, quarter thrust level booster. Two sizes of hybrid boosters were configured for either pump-fed or pressure-fed oxygen feed systems. Performance analyses show improved payload capability relative to a solid propellant booster. Size optimization and fuel safety considerations resulted in a 4.57 m (180 inch) diameter large booster with an inert hydrocarbon fuel. The preferred diameter for the quarter thrust level booster is 2.53 m (96 inches). As part of the design study critical technology issues were identified and a technology acquisition and demonstration plan was formulated.

Direct handling of equality constraints in multilevel optimization

NASA Technical Reports Server (NTRS)

Renaud, John E.; Gabriele, Gary A.

1990-01-01

In recent years there have been several hierarchic multilevel optimization algorithms proposed and implemented in design studies. Equality constraints are often imposed between levels in these multilevel optimizations to maintain system and subsystem variable continuity. Equality constraints of this nature will be referred to as coupling equality constraints. In many implementation studies these coupling equality constraints have been handled indirectly. This indirect handling has been accomplished using the coupling equality constraints' explicit functional relations to eliminate design variables (generally at the subsystem level), with the resulting optimization taking place in a reduced design space. In one multilevel optimization study where the coupling equality constraints were handled directly, the researchers encountered numerical difficulties which prevented their multilevel optimization from reaching the same minimum found in conventional single level solutions. The researchers did not explain the exact nature of the numerical difficulties other than to associate them with the direct handling of the coupling equality constraints. The coupling equality constraints are handled directly, by employing the Generalized Reduced Gradient (GRG) method as the optimizer within a multilevel linear decomposition scheme based on the Sobieski hierarchic algorithm. Two engineering design examples are solved using this approach. The results show that the direct handling of coupling equality constraints in a multilevel optimization does not introduce any problems when the GRG method is employed as the internal optimizer. The optimums achieved are comparable to those achieved in single level solutions and in multilevel studies where the equality constraints have been handled indirectly.

Blade design and performance analysis on the horizontal axis tidal current turbine for low water level channel

NASA Astrophysics Data System (ADS)

Chen, C. C.; Choi, Y. D.; Y Yoon, H.

2013-12-01

Most tidal current turbine design are focused on middle and large scale for deep sea, less attention was paid in low water level channel, such as the region around the islands, coastal seas and rivers. This study aims to develop a horizontal axis tidal current turbine rotor blade which is applicable to low water level island region in southwest of Korea. The blade design is made by using BEMT(blade element momentum theory). The section airfoil profile of NACA63-415 is used, which shows good performance of lift coefficient and drag coefficient. Power coefficient, pressure and velocity distributions are investigated according to TSR by CFD analysis.

Development and evaluation of a study design typology for human research.

PubMed

Carini, Simona; Pollock, Brad H; Lehmann, Harold P; Bakken, Suzanne; Barbour, Edward M; Gabriel, Davera; Hagler, Herbert K; Harper, Caryn R; Mollah, Shamim A; Nahm, Meredith; Nguyen, Hien H; Scheuermann, Richard H; Sim, Ida

2009-11-14

A systematic classification of study designs would be useful for researchers, systematic reviewers, readers, and research administrators, among others. As part of the Human Studies Database Project, we developed the Study Design Typology to standardize the classification of study designs in human research. We then performed a multiple observer masked evaluation of active research protocols in four institutions according to a standardized protocol. Thirty-five protocols were classified by three reviewers each into one of nine high-level study designs for interventional and observational research (e.g., N-of-1, Parallel Group, Case Crossover). Rater classification agreement was moderately high for the 35 protocols (Fleiss' kappa = 0.442) and higher still for the 23 quantitative studies (Fleiss' kappa = 0.463). We conclude that our typology shows initial promise for reliably distinguishing study design types for quantitative human research.

Health facilities humanisation: design guidelines supported by statistical evidence.

PubMed

Bosia, Daniela; Marino, Donatella; Peretti, Gabriella

2016-01-01

Healthcare building humanisation is currently a widely debated issue and the development of patient centered and evidence based design is growing worldwide. Many international health organizations and researchers understand the importance of Patient Centred Design and leading architects incorporate it into the design process. In Italy this design approach is still at an early stage. The article refers to research commissioned by the Italian Health Ministry and carried out by R. Del Nord (Università degli Studi di Firenze) and G. Peretti (Politecnico di Torino) with their collaborators. The scope of the research was the definition of design guidelines for healthcare facilities humanisation. The methodology framework adopted is the well established need and performance approach in architectural design. The article deals with the results of statistical investigations for the definition and ranking of users' needs and the consistent expression of their requirements. The investigations were carried out with the cooperation of psychologists of the Università degli Studi di Torino and researchers of the Università degli Studi di Cagliari. The proposed evaluation system allows ranking of health facilities according to the level of humanisation achieved. The statistical investigation evidence collected allowed the definition of humanisation design guidelines for health-care facilities and for the assessment of their specific level of humanisation.

A Design Pattern for Decentralised Decision Making

PubMed Central

Valentini, Gabriele; Fernández-Oto, Cristian; Dorigo, Marco

2015-01-01

The engineering of large-scale decentralised systems requires sound methodologies to guarantee the attainment of the desired macroscopic system-level behaviour given the microscopic individual-level implementation. While a general-purpose methodology is currently out of reach, specific solutions can be given to broad classes of problems by means of well-conceived design patterns. We propose a design pattern for collective decision making grounded on experimental/theoretical studies of the nest-site selection behaviour observed in honeybee swarms (Apis mellifera). The way in which honeybee swarms arrive at consensus is fairly well-understood at the macroscopic level. We provide formal guidelines for the microscopic implementation of collective decisions to quantitatively match the macroscopic predictions. We discuss implementation strategies based on both homogeneous and heterogeneous multiagent systems, and we provide means to deal with spatial and topological factors that have a bearing on the micro-macro link. Finally, we exploit the design pattern in two case studies that showcase the viability of the approach. Besides engineering, such a design pattern can prove useful for a deeper understanding of decision making in natural systems thanks to the inclusion of individual heterogeneities and spatial factors, which are often disregarded in theoretical modelling. PMID:26496359

Helicopter Noise Reduction Design Trade-Off Study

DTIC Science & Technology

1977-01-01

level, A-weighted sound pressure level, perceived noise level and tone corrected perceived noise level time histories, and are further analyzed to...DATA ---------------------------- 101 10 BASELINE VEHICLE EFFECTIVE PERCEIVED NOISE LEVELS (EPiII.) AND RANGE FOR MAXIMIJM TONE CORRECTED PERCEIVED...and tone corrected perceived noise level (PNLT) units. All noise level calculation methods have been computerized in FORTRAN language for use on the

Design, fabrication and acoustic tests of a 36 inch (0.914 meter) statorless turbotip fan

NASA Technical Reports Server (NTRS)

Smith, E. G.; Stempert, D. L.; Uhl, W. R.

1975-01-01

The LF336/E is a 36 inch (0.914 meter) diameter fan designed to operate in a rotor-alone configuration. Design features required for modification of the existing LF336/A rotor-stator fan into the LF336/E statorless fan configuration are discussed. Tests of the statorless fan identified an aerodynamic performance deficiency due to inaccurate accounting of the fan exit swirl during the aerodynamic design. This performance deficiency, related to fan exit static pressure levels, produced about a 20 percent thrust loss. A study was then conducted for further evaluation of the fan exit flow fields typical of statorless fan systems. This study showed that through proper selection of fan design variables such as pressure ratio, radius ratio, and swirl distributions, performance of a statorless fan configuration could be improved with levels of thrust approaching the conventional rotor-stator fan system. Acoustic measurements were taken for the statorless fan system at both GE and NASA, and when compared to other lift fan systems, showed noise levels comparable to the quietest lift fan configuration which included rotor-stator spacing and acoustic treatment. The statorless fan system was also used to determine effects of rotor leading edge serrations on noise generations. A cascade test program identified the serration geometry based on minimum pressure losses, wake turbulence levels and noise generations.

Analysis of Students' Online Information Searching Strategies, Exposure to Internet Information Pollution and Cognitive Absorption Levels Based on Various Variables

ERIC Educational Resources Information Center

Kurt, Adile Askim; Emiroglu, Bülent Gürsel

2018-01-01

The objective of the present study was to examine students' online information searching strategies, their cognitive absorption levels and the information pollution levels on the Internet based on different variables and to determine the correlation between these variables. The study was designed with the survey model, the study group included 198…

The microwave radiometer spacecraft: A design study

NASA Technical Reports Server (NTRS)

Wright, R. L. (Editor)

1981-01-01

A large passive microwave radiometer spacecraft with near all weather capability of monitoring soil moisture for global crop forecasting was designed. The design, emphasizing large space structures technology, characterized the mission hardware at the conceptual level in sufficient detail to identify enabling and pacing technologies. Mission and spacecraft requirements, design and structural concepts, electromagnetic concepts, and control concepts are addressed.

Designing and Financing an Integrated Program of College Study: Lessons from the California Academy of Liberal Studies

ERIC Educational Resources Information Center

Goldberger, Susan; Haynes, Leslie

2005-01-01

This document represents the first in a series of design briefs on models for early college high schools. The briefs focus on the academic and organizational design of the college component and tie those key features to a sustainable financing model. By engaging students in up to two years of demanding college-level work while still in high…

IETM Usability: Using Empirical Studies to Improve Performance Aiding

DTIC Science & Technology

2001-05-14

is highly graphical . An example screen is shown in Figure 3. Following is a description of the design solutions incorporated in Interface B to...in enabling lesser skilled U.S. Navy maintainers to perform their jobs. This empirical study about the design and effectiveness of high level IETMs...novice preferences and performance were documented to inform future adaptive interface design efforts. The maintainers who participated were

Structuring Video Cases to Support Future Teachers' Problem Solving

ERIC Educational Resources Information Center

Kale, Ugur; Whitehouse, Pamela

2012-01-01

This study examined preservice teachers' problem-solving skills through the use of an online video case study. Eighty preservice teachers participated in the study with a three-level video presentation by a two-grade-level between-subjects factorial design. The study incorporates a content analysis framework to examine both the components and the…

Mars Orbiter Study. Volume 2: Mission Design, Science Instrument Accommodation, Spacecraft Design

NASA Technical Reports Server (NTRS)

Drean, R.; Macpherson, D.; Steffy, D.; Vargas, T.; Shuman, B.; Anderson, K.; Richards, B.

1982-01-01

Spacecraft system and subsystem designs were developed at the conceptual level to perform either of two Mars Orbiter Missions, a Climatology Mission and an Aeronomy Mission. The objectives of these missions are to obtain and return data to increase knowledge of Mars.

Study of blade aspect ratio on a compressor front stage aerodynamic and mechanical design report

NASA Technical Reports Server (NTRS)

Burger, G. D.; Lee, D.; Snow, D. W.

1979-01-01

A single stage compressor was designed with the intent of demonstrating that, for a tip speed and hub-tip ratio typical of an advanced core compressor front stage, the use of low aspect ratio can permit high levels of blade loading to be achieved at an acceptable level of efficiency. The design pressure ratio is 1.8 at an adiabatic efficiency of 88.5 percent. Both rotor and stator have multiple-circular-arc airfoil sections. Variable IGV and stator vanes permit low speed matching adjustments. The design incorporates an inlet duct representative of an engine transition duct between fan and high pressure compressor.

Course of Study for Secondary Level Bookkeeping/Accounting. Final Report.

ERIC Educational Resources Information Center

Brower, Edward B.

The present project was designed to continue the preparation of a course of study useful for developing secondary level bookkeeping/accounting instruction. The course of study is intended to (1) derive vocational instruction for students with varying career goals, (2) develop accounting-oriented career exploration units for Introduction to…

The Relationship between Pre-Service Teachers' Awareness Levels of Electromagnetic Pollution and Other Environmental Problems

ERIC Educational Resources Information Center

Koklukaya, Ayse Nesibe; Guven Yildirim, Ezgi; Selvi, Mahmut

2017-01-01

Purpose: The purpose of this study is to find out the relationship between the awareness level of preservice science teachers' conscious use of technological devices, which cause electromagnetic pollution, and their awareness level of related environmental problems. Research Methods: In this study, a mixed design method was used. A relational…

Hypotetical learning trajectory to anticipate mathematics anxiety in algebra learning based on the perspective of didactical situation theory

NASA Astrophysics Data System (ADS)

Yuliani, R. E.; Suryadi, D.; Dahlan, J. A.

2018-05-01

The objective of this research is to design an alleged teacher learning path or Hypotetical Learning Trajectory (HLT) to anticipate mathematics anxiety of students in learning algebra. HLT loads expected mathematics learning objectives, estimates the level of knowledge and understanding of the students, as well as the selection of mathematical activity in accordance with the learning competencies. This research uses educational design research method. The research steps consist of a preliminary design, experimental and retrospective analysis. Data were gathered from various sources, such as data is written during the research process of test results, documentation, sheet results of students' work, results of interviews, questionnaires, and video recordings. The subjects of the study were 10 junior high school students. Based on the research identified 2 students at the level of high anxiety, 7 people at medium anxiety level and 1 student at low anxiety level. High anxiety levels about 20%, was approximately 70% and approximately 10% lower. These results can be used as an evaluation and reflection for designing materials that can anticipate mathematics anxiety of students learning algebra concepts.

Range and trend of expected toxicity level (ETL) in standard A + B designs: a report from the Children's Oncology Group.

PubMed

Chen, Zhengjia; Krailo, Mark D; Sun, Junfeng; Azen, Stanley P

2009-03-01

The traditional algorithm-based 3+3 designs are most widely used for their practical simplicity in phase I clinical trials. At early stage, a common belief was that the expected toxicity level (ETL) at the maximum tolerated dose (MTD) should be 33% [Storer, B. Design and analysis of phase I clinical trials. Biometrics 1989;45;925-937, Gorden, N., Willson, J. Using toxicity grades in the design and analysis of cancer phase I clinical trials. Statistics in Medicine 1992; 11: 2063-2075, Mick, R. Phase I Clinical Trial Design. In Schilsky, R., Milano, G., Ratain, M., eds. Principles of Antineoplastic Drug Development and Pharmacology New York, NY: Marcel Dekker, 1996; 29-36]. Recently, Kang and Ahn [Kang, S., Ahn, C. The expected toxicity rate at the maximum tolerated dose in the standard phase I cancer clinical trial design. Drug Information Journal 2001; 35:1189-1199, Kang, S., Ahn, C. An investigation of the traditional algorithm-based designs for phase I cancer clinical trials. Drug Information Journal 2002; 36:865-873] found that the ETL is between 17% and 21% and He et al [He, W., Liu, J., Binkowitz, B., Quan, H. A model-based approach in the estimation of the maximum tolerated dose in phase I cancer clinical trials. Statistics in Medicine 2006; 25(12):2027-42] further reported that the ETL ranges from 19% to 24%. However they only investigated designs where the number of dose levels was at most 20. It has practical significance in designing and conducting phase I clinical trial to definitely assess the full range and trend of ETL by all possible number of tested dose levels in traditional algorithm-based A+B designs, especially 3+3 designs. In this simulation study, we originally find that the ETL decreases monotonically from about 30% to 0% as the number of dose levels increase from 3 to infinity, which will correct the inaccuracy in the common belief among phase I trial investigators. To help better design and conduct phase I trials, we create a table as a reference for the association between ETL and number of dose levels considered in a design when the exact shape of the dose-toxicity relationship is not well understood. We conclude that the number of specified dose levels is an important factor affecting substantially the ETL at MTD and recommend that fewer than 20 dose levels be designated.

An Approach to Risk-Based Design Incorporating Damage Tolerance Analyses

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Glaessgen, Edward H.; Sleight, David W.

2002-01-01

Incorporating risk-based design as an integral part of spacecraft development is becoming more and more common. Assessment of uncertainties associated with design parameters and environmental aspects such as loading provides increased knowledge of the design and its performance. Results of such studies can contribute to mitigating risk through a system-level assessment. Understanding the risk of an event occurring, the probability of its occurrence, and the consequences of its occurrence can lead to robust, reliable designs. This paper describes an approach to risk-based structural design incorporating damage-tolerance analysis. The application of this approach to a candidate Earth-entry vehicle is described. The emphasis of the paper is on describing an approach for establishing damage-tolerant structural response inputs to a system-level probabilistic risk assessment.

Stylization levels of industrial design objects

NASA Astrophysics Data System (ADS)

Kukhta, M. S.; Sokolov, A. P.; Krauinsh, D. P.; Bouchard, C.

2017-01-01

The urgency of the research of form making problem in design is associated with the necessity of new understanding of visual culture and new approaches to design engineering representing the integration of artistic and designed problems. The aim of this research is to study the levels of stylization of design objects and dependance (relation) on the specific project objectives and existing technologies. On the ground of quantitative evaluation, the stylization measures are emphasized: figurative image, stylized image and abstract image. Theoretic conclusions are complemented by practical problem solution over creating openwork metal lantern. Variants of both the traditional mains supply of the lantern and the autonomic supply system based on solar energy were offered. The role of semantic factor, affecting the depth of perception of design objects semantic space, is represented in this paper.

In-Flight Manual Electronics Repair for Deep-Space Missions

NASA Technical Reports Server (NTRS)

Pettegrew, Richard; Easton, John; Struk, Peter; Anderson, Eric

2007-01-01

Severe limitations on mass and volume available for spares on long-duration spaceflight missions will require electronics repair to be conducted at the component level, rather than at the sub-assembly level (referred to as Orbital Replacement Unit, or 'ORU'), as is currently the case aboard the International Space Station. Performing reliable component-level repairs in a reduced gravity environment by crew members will require careful planning, and some specialty tools and systems. Additionally, spacecraft systems must be designed to enable such repairs. This paper is an overview of a NASA project which examines all of these aspects of component level electronic repair. Results of case studies that detail how NASA, the U.S. Navy, and a commercial company currently approach electronics repair are presented, along with results of a trade study examining commercial technologies and solutions which may be used in future applications. Initial design recommendations resulting from these studies are also presented.

Structural design of composite rotor blades with consideration of manufacturability, durability, and manufacturing uncertainties

NASA Astrophysics Data System (ADS)

Li, Leihong

A modular structural design methodology for composite blades is developed. This design method can be used to design composite rotor blades with sophisticate geometric cross-sections. This design method hierarchically decomposed the highly-coupled interdisciplinary rotor analysis into global and local levels. In the global level, aeroelastic response analysis and rotor trim are conduced based on multi-body dynamic models. In the local level, variational asymptotic beam sectional analysis methods are used for the equivalent one-dimensional beam properties. Compared with traditional design methodology, the proposed method is more efficient and accurate. Then, the proposed method is used to study three different design problems that have not been investigated before. The first is to add manufacturing constraints into design optimization. The introduction of manufacturing constraints complicates the optimization process. However, the design with manufacturing constraints benefits the manufacturing process and reduces the risk of violating major performance constraints. Next, a new design procedure for structural design against fatigue failure is proposed. This procedure combines the fatigue analysis with the optimization process. The durability or fatigue analysis employs a strength-based model. The design is subject to stiffness, frequency, and durability constraints. Finally, the manufacturing uncertainty impacts on rotor blade aeroelastic behavior are investigated, and a probabilistic design method is proposed to control the impacts of uncertainty on blade structural performance. The uncertainty factors include dimensions, shapes, material properties, and service loads.

Obesity prevention and obesogenic behavior interventions in child care: A systematic review.

PubMed

Sisson, Susan B; Krampe, Megan; Anundson, Katherine; Castle, Sherri

2016-06-01

Review peer-reviewed interventions designed to reduce obesity and improve obesogenic behaviors, including physical activity, diet, and screen time, at child care centers. Interventions components and outcomes, study design, duration, use of behavioral theory, and level of social ecological influence are detailed. Article searches were conducted from March 2014, October 2014, March 2015, January 2016 across three databases. Eligible interventions were conducted in child care settings, included 3-to-5-year-old children, included an outcome measure of obesity or obesogenic behavior, and published in English. Study design quality was assessed using Stetler's Level of Quantitative Evidence. All unique records were screened (n=4589): 237 articles were assessed for eligibility. Of these, 97 articles describing 71 interventions met inclusion criteria. Forty-four articles included multi-level interventions. Twenty-nine interventions included an outcome measure of obesity. Forty-one interventions included physical activity. Forty-five included diet. Eight included screen time. Fifty-five percent of interventions were Level II (randomized controlled trials), while 37% were Level III (quasi-experimental or pre-post only study design), and 8% were Level IV (non-experimental or natural experiments). Most interventions had the intended effect on the target: obesity 48% (n=14), physical activity 73% (n=30), diet 87% (n=39), and screen time 63% (n=5). Summarizing intervention strategies and assessing their effectiveness contributes to the existing literature and may provide direction for practitioners and researchers working with young children in child care. Most interventions produced the targeted changes in obesity and obesity-associated behaviors, supporting current and future efforts to collaborate with early-care centers and professionals for obesity prevention. Copyright © 2016 Elsevier Inc. All rights reserved.

Functional-to-form mapping for assembly design automation

NASA Astrophysics Data System (ADS)

Xu, Z. G.; Liu, W. M.; Shen, W. D.; Yang, D. Y.; Liu, T. T.

2017-11-01

Assembly-level function-to-form mapping is the most effective procedure towards design automation. The research work mainly includes: the assembly-level function definitions, product network model and the two-step mapping mechanisms. The function-to-form mapping is divided into two steps, i.e. mapping of function-to-behavior, called the first-step mapping, and the second-step mapping, i.e. mapping of behavior-to-structure. After the first step mapping, the three dimensional transmission chain (or 3D sketch) is studied, and the feasible design computing tools are developed. The mapping procedure is relatively easy to be implemented interactively, but, it is quite difficult to finish it automatically. So manual, semi-automatic, automatic and interactive modification of the mapping model are studied. A mechanical hand F-F mapping process is illustrated to verify the design methodologies.

Comparison of surface abrasion produced on the enamel surface by a standard dentifrice using three different toothbrush bristle designs: A profilometric in vitro study

PubMed Central

Kumar, Sandeep; Kumari, Minal; Acharya, Shashidhar; Prasad, Ram

2014-01-01

Aim: The aim was to assess, in vitro, the effect on surface abrasivity of enamel surface caused by three different types (flat trim, zig-zag, bi-level) of toothbrush bristle design. Materials and Methods: Twenty-four freshly extracted, sound, human incisor teeth were collected for this study. The enamel slab was prepared, which were mounted, on separate acrylic bases followed by subjected to profilometric analysis. The surface roughness was measured using the profilometer. The specimen were divided into three groups, each group containing eight mounted specimens, wherein, Group 1 specimens were brushed with flat trim toothbrush; Group 2 brushed with zig-zag and Group 3 with bi-level bristle design. A commercially available dentifrice was used throughout the study. A single specimen was brushed for 2 times daily for 2 min period for 1 week using a customized brushing apparatus. The pre- and post-roughness value change were analyzed and recorded. Statistical test: Kruskal–Wallis test and Mann–Whitney U-test. Result: The results showed that surface abrasion was produced on each specimen, in all the three groups, which were subjected to brushing cycle. However, the bi-level bristle design (350% increase in roughness, P = 0.021) and zig-zag bristle design (160% increase in roughness, P = 0.050) showed significantly higher surface abrasion when compared with flat trim bristle design toothbrush. Conclusion: Flat trim toothbrush bristle produces least surface abrasion and is relatively safe for use. PMID:25125852

Is it all in the game? Flow experience and scientific practices during an INPLACE mobile game

NASA Astrophysics Data System (ADS)

Bressler, Denise M.

Mobile science learning games show promise for promoting scientific practices and high engagement. Researchers have quantified this engagement according to flow theory. Using an embedded mixed methods design, this study investigated whether an INPLACE mobile game promotes flow experience, scientific practices, and effective team collaboration. Students playing the game (n=59) were compared with students in a business-as-usual control activity (n=120). Using an open-ended instrument designed to measure scientific practices and a self-report flow survey, this study empirically assessed flow and learner's scientific practices. The game players had significantly higher levels of flow and scientific practices. Using a multiple case study approach, collaboration among game teams (n=3 teams) were qualitatively compared with control teams (n=3 teams). Game teams revealed not only higher levels of scientific practices but also higher levels of engaged responses and communal language. Control teams revealed lower levels of scientific practice along with higher levels of rejecting responses and command language. Implications for these findings are discussed.

No significant difference in depression rate in employed and unemployed in a pair-matched study design.

PubMed

Mihai, Adriana; Ricean, Alina; Voidazan, Septimiu

2014-01-01

The main objective of this study was to evaluate the differences of depression rate in employed and unemployed persons in the period of financial and economic crisis in Romania, in a pair-matched study design. The cross-sectional study uses a pair match design (395 pairs) of two groups of employed and unemployed persons. Other socio-demographic risk factors of depression (gender, age, marital status, residence, ethnicity, educational level, and profession) were controlled. The study was done in a historical period of economic crisis, 2009-2010. For the screening of depression we used the patient health questionnaire-9. There were no statistical differences (p = 0.054) between the depression rates in the employed (17.98%) and unemployed (23.80%) samples. The depression rate in both groups was higher in females, age (51-55), marital status (divorced), living in the rural area, with a low level of education and poverty. Suicidal ideas are more frequent in men, employed persons with low level of education and in unemployed persons with medium level of education. The exposure to short term unemployment status was not associated with change in depression rate in the period of financial and economic crisis in Romania, comparing with controls pair-matched. Unemployment status increases the depression rate only in vulnerable groups such as single or divorced women; and suicidal ideas were associated with the unemployment status (longer than 8 months) in men from rural area with medium level of education.

Ageing management program for the Spanish low and intermediate level waste disposal and spent fuel and high-level waste centralised storage facilities

NASA Astrophysics Data System (ADS)

Zuloaga, P.; Ordoñez, M.; Andrade, C.; Castellote, M.

2011-04-01

The generic design of the centralised spent fuel storage facility was approved by the Spanish Safety Authority in 2006. The planned operational life is 60 years, while the design service life is 100 years. Durability studies and surveillance of the behaviour have been considered from the initial design steps, taking into account the accessibility limitations and temperatures involved. The paper presents an overview of the ageing management program set in support of the Performance Assessment and Safety Review of El Cabril low and intermediate level waste (LILW) disposal facility. Based on the experience gained for LILW, ENRESA has developed a preliminary definition of the Ageing Management Plan for the Centralised Interim Storage Facility of spent Fuel and High Level Waste (HLW), which addresses the behaviour of spent fuel, its retrievability, the confinement system and the reinforced concrete structure. It includes tests plans and surveillance design considerations, based on the El Cabril LILW disposal facility.

Studies To Examine Potential Tolerability Differences between the 5-HT2C Receptor Selective Agonists Lorcaserin and CP-809101.

PubMed

Higgins, Guy A; Silenieks, Leonardo B; Patrick, Amy; De Lannoy, Ines A M; Fletcher, Paul J; Parker, Linda A; MacLusky, Neil J; Sullivan, Laura C; Chavera, Teresa A; Berg, Kelly A

2017-05-17

Lorcaserin (LOR) is a selective 5-HT 2C receptor agonist that has been FDA approved as a treatment for obesity. The most frequently reported side-effects of LOR include nausea and headache, which can be dose limiting. We have previously reported that in the rat, while LOR produced unconditioned signs characteristic of nausea/malaise, the highly selective 5-HT 2C agonist CP-809101 (CP) produced fewer equivalent signs. Because this may indicate a subclass of 5-HT 2C agonists having better tolerability, the present studies were designed to further investigate this apparent difference. In a conditioned gaping model, a rodent test of nausea, LOR produced significantly higher gapes compared to CP consistent with it having higher emetogenic properties. Subsequent studies were designed to identify features of each drug that may account for such differences. In rats trained to discriminate CP-809101 from saline, both CP and LOR produced full generalization suggesting a similar interoceptive cue. In vitro tests of functional selectivity designed to examine signaling pathways activated by both drugs in CHO (Chinese hamster ovary) cells expressing h5-HT 2C receptors failed to identify evidence for biased signaling differences between LOR and CP. Thus, both drugs showed similar profiles across PLC, PLA 2 , and ERK signaling pathways. In studies designed to examine pharmacokinetic differences between LOR and CP, while drug plasma levels correlated with increasing dose, CSF levels did not. CSF levels of LOR increased proportionally with dose; however CSF levels of CP plateaued from 6 to 12 mg/kg. Thus, the apparently improved tolerability of CP likely reflects a limit to CNS levels attained at relatively high doses.

Simulation-Based Abdominal Ultrasound Training - A Systematic Review.

PubMed

Østergaard, M L; Ewertsen, C; Konge, L; Albrecht-Beste, E; Bachmann Nielsen, M

2016-06-01

The aim is to provide a complete overview of the different simulation-based training options for abdominal ultrasound and to explore the evidence of their effect. This systematic review was performed according to the PRISMA guidelines and Medline, Embase, Web of Science, and the Cochrane Library was searched. Articles were divided into three categories based on study design (randomized controlled trials, before-and-after studies and descriptive studies) and assessed for level of evidence using the Oxford Centre for Evidence Based Medicine (OCEBM) system and for bias using the Cochrane Collaboration risk of bias assessment tool. Seventeen studies were included in the analysis: four randomized controlled trials, eight before-and-after studies with pre- and post-test evaluations, and five descriptive studies. No studies scored the highest level of evidence, and 14 had the lowest level. Bias was high for 11 studies, low for four, and unclear for two. No studies used a test with established evidence of validity or examined the correlation between obtained skills on the simulators and real-life clinical skills. Only one study used blinded assessors. The included studies were heterogeneous in the choice of simulator, study design, participants, and outcome measures, and the level of evidence for effect was inadequate. In all studies simulation training was equally or more beneficial than other instructions or no instructions. Study designs had significant built-in bias and confounding issues; therefore, further research should be based on randomized controlled trials using tests with validity evidence and blinded assessors. © Georg Thieme Verlag KG Stuttgart · New York.

Computer-based teaching module design: principles derived from learning theories.

PubMed

Lau, K H Vincent

2014-03-01

The computer-based teaching module (CBTM), which has recently gained prominence in medical education, is a teaching format in which a multimedia program serves as a single source for knowledge acquisition rather than playing an adjunctive role as it does in computer-assisted learning (CAL). Despite empirical validation in the past decade, there is limited research into the optimisation of CBTM design. This review aims to summarise research in classic and modern multimedia-specific learning theories applied to computer learning, and to collapse the findings into a set of design principles to guide the development of CBTMs. Scopus was searched for: (i) studies of classic cognitivism, constructivism and behaviourism theories (search terms: 'cognitive theory' OR 'constructivism theory' OR 'behaviourism theory' AND 'e-learning' OR 'web-based learning') and their sub-theories applied to computer learning, and (ii) recent studies of modern learning theories applied to computer learning (search terms: 'learning theory' AND 'e-learning' OR 'web-based learning') for articles published between 1990 and 2012. The first search identified 29 studies, dominated in topic by the cognitive load, elaboration and scaffolding theories. The second search identified 139 studies, with diverse topics in connectivism, discovery and technical scaffolding. Based on their relative representation in the literature, the applications of these theories were collapsed into a list of CBTM design principles. Ten principles were identified and categorised into three levels of design: the global level (managing objectives, framing, minimising technical load); the rhetoric level (optimising modality, making modality explicit, scaffolding, elaboration, spaced repeating), and the detail level (managing text, managing devices). This review examined the literature in the application of learning theories to CAL to develop a set of principles that guide CBTM design. Further research will enable educators to take advantage of this unique teaching format as it gains increasing importance in medical education. © 2014 John Wiley & Sons Ltd.

An Ex Post Facto Study Exploring the Impact of Parental Level of Education and Parental Support on First-Year College Adjustment

ERIC Educational Resources Information Center

Huntley, Kristy M.

2011-01-01

This study explored the impact that parental levels of education and parental support have on college adjustment for first-year students. An ex post facto design was used to examine parental level of education and parental support as variables. Parental level of education is a categorical variable based on report from the student. Parental support…

Revealing Student Thinking about Experimental Design and the Roles of Control Experiments

ERIC Educational Resources Information Center

Shi, Jia; Power, Joy M.; Klymkowsky, Michael W.

2011-01-01

Well-designed "controls" distinguish experimental from non-experimental studies. Surprisingly, we found that a high percentage of students had difficulty identifying control experiments even after completing three university-level laboratory courses. To address this issue, we designed and ran a revised cell biology lab course in which…

Multi-fuel rotary engine for general aviation aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, an advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25,000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed. Previously announced in STAR as N83-18910

The Use of Instructional Simulations to Support Classroom Teaching: A Crisis Communication Case Study

ERIC Educational Resources Information Center

Shifflet, Mark; Brown, Jane

2006-01-01

The purpose of this study was to investigate how exposure to classroom instruction affected the use of a computer simulation that was designed to provide students an opportunity to apply material presented in class. The study involved an analysis of a computer-based crisis communication case study designed for a college-level public relations…

Comparing Pedagogies for Plastic Waste Management at University Level

ERIC Educational Resources Information Center

Yeung, Siu-Kit; So, Wing-Mui Winnie; Cheng, Nga-Yee Irene; Cheung, Tsz-Yan; Chow, Cheuk-Fai

2017-01-01

Purpose: This paper aims to compare the learning outcomes of gaming simulation and guided inquiry in sustainability education on plastic waste management. The current study targets the identification of success factors in these teaching approaches. Design/methodology/approach: This study used a quasi-experimental design with undergraduate…

Design of ERIC Usage Studies. Volume I.

ERIC Educational Resources Information Center

ERIC Clearinghouse on Information Resources, Syracuse, NY.

Tables showing the types of Educational Resources Information Center (ERIC) products and their dispersion provide background information for the executive summaries of usage study design reports focusing on three levels: (1) system operations; (2) subscribers to the services provided; and (3) the ultimate "end-users" of the service. The…

Optimal Design for Regression Discontinuity Studies with Clustering

ERIC Educational Resources Information Center

Rhoads, Christopher; Dye, Charles

2014-01-01

Recent years have seen an increased interest in quantitative educational research studies that use random assignment (RA) to evaluate the causal impacts of educational interventions (Angrist, 2004). The multi-level structure of the public education system in the United States often leads to experimental designs where naturally occurring clusters…

Model-Based Engineering Design for Trade Space Exploration throughout the Design Cycle

NASA Technical Reports Server (NTRS)

Lamassoure, Elisabeth S.; Wall, Stephen D.; Easter, Robert W.

2004-01-01

This paper presents ongoing work to standardize model-based system engineering as a complement to point design development in the conceptual design phase of deep space missions. It summarizes two first steps towards practical application of this capability within the framework of concurrent engineering design teams and their customers. The first step is standard generation of system sensitivities models as the output of concurrent engineering design sessions, representing the local trade space around a point design. A review of the chosen model development process, and the results of three case study examples, demonstrate that a simple update to the concurrent engineering design process can easily capture sensitivities to key requirements. It can serve as a valuable tool to analyze design drivers and uncover breakpoints in the design. The second step is development of rough-order- of-magnitude, broad-range-of-validity design models for rapid exploration of the trade space, before selection of a point design. At least one case study demonstrated the feasibility to generate such models in a concurrent engineering session. The experiment indicated that such a capability could yield valid system-level conclusions for a trade space composed of understood elements. Ongoing efforts are assessing the practicality of developing end-to-end system-level design models for use before even convening the first concurrent engineering session, starting with modeling an end-to-end Mars architecture.

Multilevel corporate environmental responsibility.

PubMed

Karassin, Orr; Bar-Haim, Aviad

2016-12-01

The multilevel empirical study of the antecedents of corporate social responsibility (CSR) has been identified as "the first knowledge gap" in CSR research. Based on an extensive literature review, the present study outlines a conceptual multilevel model of CSR, then designs and empirically validates an operational multilevel model of the principal driving factors affecting corporate environmental responsibility (CER), as a measure of CSR. Both conceptual and operational models incorporate three levels of analysis: institutional, organizational, and individual. The multilevel nature of the design allows for the assessment of the relative importance of the levels and of their components in the achievement of CER. Unweighted least squares (ULS) regression analysis reveals that the institutional-level variables have medium relationships with CER, some variables having a negative effect. The organizational level is revealed as having strong and positive significant relationships with CER, with organizational culture and managers' attitudes and behaviors as significant driving forces. The study demonstrates the importance of multilevel analysis in improving the understanding of CSR drivers, relative to single level models, even if the significance of specific drivers and levels may vary by context. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Design and Organisation Features of Two Online Courses: A Case Study of Their Emergence and Evolution

ERIC Educational Resources Information Center

Richards, Kari

2017-01-01

This study reports the findings of a qualitative case study that examined how elements of design and organization were conceptualized and enacted in two graduate level online courses, and, how these conceptualizations and enactments evolved. Data was collected through interviews and "think-alouds" with the course instructors and through…

Effects of Higher and Lower Level Writing-To-Learn Assignments on Higher and Lower Level Examination Questions

ERIC Educational Resources Information Center

Nevid, Jeffrey S.; Ambrose, Michael A.; Pyun, Yea Seul

2017-01-01

Our study examined whether brief writing-to-learn assignments linked to lower and higher levels in Bloom's taxonomy affected performance differentially on examination performance in assessing these skill levels. Using a quasi-random design, 91 undergraduate students in an introductory psychology class completed eight lower level and eight higher…

Report: Optimization study of the preparation factors for argan oil microcapsule based on hybrid-level orthogonal array design via SPSS modeling.

PubMed

Zhao, Xi; Wu, Xiaoli; Zhou, Hui; Jiang, Tao; Chen, Chun; Liu, Mingshi; Jin, Yuanbao; Yang, Dongsheng

2014-11-01

To optimize the preparation factors for argan oil microcapsule using complex coacervation of chitosan cross-linked with gelatin based on hybrid-level orthogonal array design via SPSS modeling. Eight relatively significant factors were firstly investigated and selected as calculative factors for the orthogonal array design from the total of ten factors effecting the preparation of argan oil microcapsule by utilizing the single factor variable method. The modeling of hybrid-level orthogonal array design was built in these eight factors with the relevant levels (9, 9, 9, 9, 7, 6, 2 and 2 respectively). The preparation factors for argan oil microcapsule were investigated and optimized according to the results of hybrid-level orthogonal array design. The priorities order and relevant optimum levels of preparation factors standard to base on the percentage of microcapsule with the diameter of 30~40 μm via SPSS. Experimental data showed that the optimum factors were controlling the chitosan/gelatin ratio, the systemic concentration and the core/shell ratio at 1:2, 1.5% and 1:7 respectively, presetting complex coacervation pH at 6.4, setting cross-linking time and complex coacervation at 75 min and 30 min, using the glucose-delta lactone as the type of cross-linking agent, and selecting chitosan with the molecular weight of 2000～3000.

School Reform Meets Administrative Realities.

ERIC Educational Resources Information Center

Brown, Antoinette B.; And Others

Maryland's Challenge Grant Program was designed to bring systemic change to schools with relatively low performance levels. This paper presents findings of an ethnographic study that examined the workings of an educational reform effort across several levels of administration. Specifically, the study explored conditions that facilitated and…

Mars orbiter conceptual systems design study

NASA Technical Reports Server (NTRS)

Dixon, W.; Vogl, J.

1982-01-01

Spacecraft system and subsystem designs at the conceptual level to perform either of two Mars Orbiter missions, a Climatology Mission and an Aeronomy Mission were developed. The objectives of these missions are to obtain and return data.

Are glucose levels, glucose variability and autonomic control influenced by inspiratory muscle exercise in patients with type 2 diabetes? Study protocol for a randomized controlled trial.

PubMed

Schein, Aso; Correa, Aps; Casali, Karina Rabello; Schaan, Beatriz D

2016-01-20

Physical exercise reduces glucose levels and glucose variability in patients with type 2 diabetes. Acute inspiratory muscle exercise has been shown to reduce these parameters in a small group of patients with type 2 diabetes, but these results have yet to be confirmed in a well-designed study. The aim of this study is to investigate the effect of acute inspiratory muscle exercise on glucose levels, glucose variability, and cardiovascular autonomic function in patients with type 2 diabetes. This study will use a randomized clinical trial crossover design. A total of 14 subjects will be recruited and randomly allocated to two groups to perform acute inspiratory muscle loading at 2 % of maximal inspiratory pressure (PImax, placebo load) or 60 % of PImax (experimental load). Inspiratory muscle training could be a novel exercise modality to be used to decrease glucose levels and glucose variability. ClinicalTrials.gov NCT02292810 .

A multi-level system quality improvement intervention to reduce racial disparities in hypertension care and control: study protocol

PubMed Central

2013-01-01

Background Racial disparities in blood pressure control have been well documented in the United States. Research suggests that many factors contribute to this disparity, including barriers to care at patient, clinician, healthcare system, and community levels. To date, few interventions aimed at reducing hypertension disparities have addressed factors at all of these levels. This paper describes the design of Project ReD CHiP (Reducing Disparities and Controlling Hypertension in Primary Care), a multi-level system quality improvement project. By intervening on multiple levels, this project aims to reduce disparities in blood pressure control and improve guideline concordant hypertension care. Methods Using a pragmatic trial design, we are implementing three complementary multi-level interventions designed to improve blood pressure measurement, provide patient care management services and offer expanded provider education resources in six primary care clinics in Baltimore, Maryland. We are staggering the introduction of the interventions and will use Statistical Process Control (SPC) charting to determine if there are changes in outcomes at each clinic after implementation of each intervention. The main hypothesis is that each intervention will have an additive effect on improvements in guideline concordant care and reductions in hypertension disparities, but the combination of all three interventions will result in the greatest impact, followed by blood pressure measurement with care management support, blood pressure measurement with provider education, and blood pressure measurement only. This study also examines how organizational functioning and cultural competence affect the success of the interventions. Discussion As a quality improvement project, Project ReD CHiP employs a novel study design that specifically targets multi-level factors known to contribute to hypertension disparities. To facilitate its implementation and improve its sustainability, we have incorporated stakeholder input and tailored components of the interventions to meet the specific needs of the involved clinics and communities. Results from this study will provide knowledge about how integrated multi-level interventions can improve hypertension care and reduce disparities. Trial Registration ClinicalTrials.gov NCT01566864 PMID:23734703

Using Multiple Dialog Modes in a User-System Interface to Accomodate Different Levels of User Experience: An Experimental Study.

DTIC Science & Technology

1986-01-01

Chapter it Research Methodology This chapter describes the methodology and the experimental design used for this research. Prior to discussing the...50 Experimental Design ............................... 50 Task/Treatm ent ................................... 55 Task Design ...Figure 3.3 Interface Experiment Elements ............... 54 Figure 3.4 Experimental Design ....................... 55 Figure 3.5 Subject Assignment

Campaign-level dynamic network modelling for spaceflight logistics for the flexible path concept

NASA Astrophysics Data System (ADS)

Ho, Koki; de Weck, Olivier L.; Hoffman, Jeffrey A.; Shishko, Robert

2016-06-01

This paper develops a network optimization formulation for dynamic campaign-level space mission planning. Although many past space missions have been designed mainly from a mission-level perspective, a campaign-level perspective will be important for future space exploration. In order to find the optimal campaign-level space transportation architecture, a mixed-integer linear programming (MILP) formulation with a generalized multi-commodity flow and a time-expanded network is developed. Particularly, a new heuristics-based method, a partially static time-expanded network, is developed to provide a solution quickly. The developed method is applied to a case study containing human exploration of a near-Earth object (NEO) and Mars, related to the concept of the Flexible Path. The numerical results show that using the specific combinations of propulsion technologies, in-situ resource utilization (ISRU), and other space infrastructure elements can reduce the initial mass in low-Earth orbit (IMLEO) significantly. In addition, the case study results also show that we can achieve large IMLEO reduction by designing NEO and Mars missions together as a campaign compared with designing them separately owing to their common space infrastructure pre-deployment. This research will be an important step toward efficient and flexible campaign-level space mission planning.

COTD: Reference-free Hardware Trojan Detection in Gate-level Netlist

DTIC Science & Technology

2017-03-01

modern designs , the constraint of time- to-market window, and the cost restriction of final product highly drive the horizontal design process. The...third-party intellectual properties (3PIPs) are widely used while they expose a design to hardware Trojans (HTs) that may tamper with the design and...activated. Some work have investigated hardware Trojans in early design stages and several techniques have been proposed to study the switching

Hospital trauma level's association with outcomes for injured pregnant women and their neonates in Washington state, 1995–2012

PubMed Central

Distelhorst, John Thomas; Soltis, Michele A.; Krishnamoorthy, Vijay; Schiff, Melissa A.

2017-01-01

Background: Trauma occurs in 8% of all pregnancies. To date, no studies have evaluated the effect of the hospital's trauma designation level as it relates to birth outcomes for injured pregnant women. Methods: This population-based, retrospective cohort study evaluated the association between trauma designation levels and injured pregnancy birth outcomes. We linked Washington State Birth and Fetal Death Certificate data and the Washington State Comprehensive Hospital Abstract Recording System. Injury was identified using the International Classification of Diseases, Ninth Revision injury diagnosis and external causation codes. The association was analyzed using logistic regression to estimate odds ratios and 95% confidence intervals (CIs). Results: We identified 2492 injured pregnant women. Most birth outcomes studied, including placental abruption, induction of labor, premature rupture of membranes, cesarean delivery, maternal death, gestational age <37 weeks, fetal distress, fetal death, neonatal respiratory distress, and neonatal death, showed no association with trauma hospital level designation. Patients at trauma Level 1–2 hospitals had a 43% increased odds of preterm labor (95% CI: 1.15–1.79) and a 66% increased odds of meconium at delivery (95% CI: 1.05–2.61) compared to those treated at Level 3–4 hospitals. Patients with an injury severity score >9, treated at trauma Level 1–2 hospitals, had an aOR of low birth weight, <2500 g, of 2.52 (95% CI: 1.12–5.64). Conclusions: The majority of birth outcomes for injured patients had no association with hospitalization at a Level 1–2 compared to a Level 3–4 trauma center. PMID:28971027

Parametric study of helicopter aircraft systems costs and weights

NASA Technical Reports Server (NTRS)

Beltramo, M. N.

1980-01-01

Weight estimating relationships (WERs) and recurring production cost estimating relationships (CERs) were developed for helicopters at the system level. The WERs estimate system level weight based on performance or design characteristics which are available during concept formulation or the preliminary design phase. The CER (or CERs in some cases) for each system utilize weight (either actual or estimated using the appropriate WER) and production quantity as the key parameters.

Focused Feasibility Study Final Field Sampling Plan

DTIC Science & Technology

1993-10-01

baseline of groundwater chemistry prior to commencing additional environmental investigations of the area. Work for Phase I of the FFS is designed lo...investigations and remedial feasibility investigations at Beach Point. The groundwater data will also be used to aid in the design of any groundwater extraction...approved laboratories. The analytical data will be the equivalent of EPA Level IV data. This level of data quality has been established for environmental

A Multilevel Study of Students' Motivations of Studying Accounting: Implications for Employers

ERIC Educational Resources Information Center

Law, Philip; Yuen, Desmond

2012-01-01

Purpose: The purpose of this study is to examine the influence of factors affecting students' choice of accounting as a study major in Hong Kong. Design/methodology/approach: Multinomial logistic regression and Hierarchical Generalized Linear Modeling (HGLM) are used to analyze the survey data for the level one and level two data, which is the…

Promoting Student Progressions in Science Classrooms: A Video Study

ERIC Educational Resources Information Center

Jin, Hui; Johnson, Michele E.; Shin, Hyo Jeong; Anderson, Charles W.

2017-01-01

This study was conducted in a large-scale environmental literacy project. In the project, we developed a Learning Progression Framework (LPF) for matter and energy in social-ecological systems; the LPF contains four achievement levels. Based on the LPF, we designed a Plant Unit to help Levels 2 and 3 students advance to Level 4 of the LPF. In the…

The Relationship between Academic Achievement, Reading Habits and Critical Thinking Dispositions of Turkish Tertiary Level EFL Learners

ERIC Educational Resources Information Center

Genç, Gülten

2017-01-01

The aim of this study was to describe EFL learners' critical thinking levels and to examine the relationship between participants' critical thinking levels and selected variables such as gender, academic achievement in EFL, subject area, and self-reported reading. The overall design of the study was based on the quantitative research method. Data…

Modular Mayhem? A Case Study of the Development of the A-Level Science Curriculum in England

ERIC Educational Resources Information Center

Hayward, Geoff; McNicholl, Jane

2007-01-01

This article investigates the costs and benefits of the increased use of modular or unitized qualification designs through a case study of the GCE A-level science curriculum in England. Following a brief review of the development of modular A-levels, the various proposed advantages of modularity--short-term goals and regular feedback, flexibility…

A region-wide study of lobolly pine seedlings growth relative to four competition levels after two growing seasons

Treesearch

James H. Miller; Bruce Zutter

1987-01-01

A common study design was simultaneously established at 13 locations in the Southern United States to examine the scope of regional variation in loblolly pine (Pinus taeda L.) growth relative to four competition levels. The following competitoin levels were created and maintained for 2 years using selective herbicides: (a) complete control of all...

Ornamental Horticulture. Course of Study Outlines. 1975 Edition. Volume XXX.

ERIC Educational Resources Information Center

Wilson, Aubry

These courses of study in ornamental horticulture for secondary and adult technical education levels are based on a 1972 Rutgers University study and are designed to accomodate occupational needs in the field of ornamental horticulture. Job titles emphasized at the secondary level are caretaker, nurserymen, flower grower, and flower salesperson;…

Robust design of multiple trailing edge flaps for helicopter vibration reduction: A multi-objective bat algorithm approach

NASA Astrophysics Data System (ADS)

Mallick, Rajnish; Ganguli, Ranjan; Seetharama Bhat, M.

2015-09-01

The objective of this study is to determine an optimal trailing edge flap configuration and flap location to achieve minimum hub vibration levels and flap actuation power simultaneously. An aeroelastic analysis of a soft in-plane four-bladed rotor is performed in conjunction with optimal control. A second-order polynomial response surface based on an orthogonal array (OA) with 3-level design describes both the objectives adequately. Two new orthogonal arrays called MGB2P-OA and MGB4P-OA are proposed to generate nonlinear response surfaces with all interaction terms for two and four parameters, respectively. A multi-objective bat algorithm (MOBA) approach is used to obtain the optimal design point for the mutually conflicting objectives. MOBA is a recently developed nature-inspired metaheuristic optimization algorithm that is based on the echolocation behaviour of bats. It is found that MOBA inspired Pareto optimal trailing edge flap design reduces vibration levels by 73% and flap actuation power by 27% in comparison with the baseline design.

Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study: research design and methodology

PubMed Central

Badland, Hannah M; Schofield, Grant M; Witten, Karen; Schluter, Philip J; Mavoa, Suzanne; Kearns, Robin A; Hinckson, Erica A; Oliver, Melody; Kaiwai, Hector; Jensen, Victoria G; Ergler, Christina; McGrath, Leslie; McPhee, Julia

2009-01-01

Background Built environment attributes are recognized as being important contributors to physical activity (PA) engagement and body size in adults and children. However, much of the existing research in this emergent public health field is hindered by methodological limitations, including: population and site homogeneity, reliance on self-report measures, aggregated measures of PA, and inadequate statistical modeling. As an integral component of multi-country collaborative research, the Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study seeks to overcome these limitations by determining the strengths of association between detailed measures of the neighborhood built environment with PA levels across multiple domains and body size measures in adults and children. This article outlines the research protocol developed for the URBAN Study. Methods and design The URBAN Study is a multi-centered, stratified, cross-sectional research design, collecting data across four New Zealand cities. Within each city, 12 neighborhoods were identified and selected for investigation based on higher or lower walkability and Māori demographic attributes. Neighborhoods were selected to ensure equal representation of these characteristics. Within each selected neighborhood, 42 households are being randomly selected and an adult and child (where possible) recruited into the study. Data collection includes: objective and self-reported PA engagement, neighborhood perceptions, demographics, and body size measures. The study was designed to recruit approximately 2,000 adults and 250 children into the project. Other aspects of the study include photovoice, which is a qualitative assessment of built environment features associated with PA engagement, an audit of the neighborhood streetscape environment, and an individualized neighborhood walkability profile centered on each participant's residential address. Multilevel modeling will be used to examine the individual-level and neighborhood-level relationships with PA engagement and body size. Discussion The URBAN Study is applying a novel scientifically robust research design to provide urgently needed epidemiological information regarding the associations between the built environment and health outcomes. The findings will contribute to a larger, international initiative in which similar neighborhood selection and PA measurement procedures are utilized across eight countries. Accordingly, this study directly addresses the international priority issues of increasing PA engagement and decreasing obesity levels. PMID:19589175

DHM and serious games: a case-study oil and gas laboratories.

PubMed

Santos, V; Zamberlan, M; Streit, P; Oliveira, J; Guimarães, C; Pastura, F; Cid, G

2012-01-01

The aim in this paper is to present a research on the application of serious games for the design of laboratories in the oil and gas industries. The focus is in human virtual representation acquired from 3D scanning, human interaction, workspace layout and equipment designed considering ergonomics standards. The laboratory studies were simulated in Unity3D platform, which allows the users to control the DHM1 on the dynamic virtual scenario, in order to simulate work activities. This methodology can change the design process by improving the level of interaction between final users, managers and human factor teams. That helps to better visualize future work settings and improve the level of participation between all stakeholders.

Preliminary Assessment of Water Levels in Bedrock Wells in New Hampshire, 1984 to 2007

USGS Publications Warehouse

Ayotte, Joseph D.; Kernen, Brandon M.; Wunsch, David R.; Argue, Denise M.; Bennett, Derek S.; Mack, Thomas J.

2010-01-01

These data provided an opportunity to examine groundwater-level conditions across the state; however, the bedrock wells used in this study would not be suitable for rigorous evaluation of trends in SWL across the state because the locations and characteristics of the wells vary with time. Further, these wells cannot substitute for a carefully designed network of wells selected for the sole purpose of monitoring trends in water levels over time. The SWL data may be useful in the design of a monitoring network, and continued collection of water-level data from the bedrock wells could be used to augment data from monitoring wells.

Modification Plans For The NASA 5.2 Second Drop Tower

NASA Technical Reports Server (NTRS)

Urban, David

2015-01-01

A design study is currently underway to examine the possibility of converting the NASA Glenn Research Center 5.2 second drop-tower to include testing at partial gravity levels and to increase the test duration to approximately 10 seconds and the number of tests conducted in a day to over 30. This will be achieved by converting to a magnetic-levitation system to drive the test capsule. This conversion will require concessions in certain areas to enable the enhanced capability. In particular the quality of g or vibration attainable in the new design is currently unknown. This capability may trade against payload mass, volume, or test duration. The acceleration quality for partial-g studies and the launch and deceleration levels are also in the process of definition. The status of the redesign study is presented along with discussion of the critical design options. Input from the community is sought to enable optimization of the design for future combustion applications.

Structural Design of Ares V Interstage Composite Structure

NASA Technical Reports Server (NTRS)

Sleigh, David W.; Sreekantamurthy, Thammaiah; Kosareo, Daniel N.; Martin, Robert A.; Johnson, Theodore F.

2011-01-01

Preliminary and detailed design studies were performed to mature composite structural design concepts for the Ares V Interstage structure as a part of NASA s Advanced Composite Technologies Project. Aluminum honeycomb sandwich and hat-stiffened composite panel structural concepts were considered. The structural design and analysis studies were performed using HyperSizer design sizing software and MSC Nastran finite element analysis software. System-level design trade studies were carried out to predict weight and margins of safety for composite honeycomb-core sandwich and composite hat-stiffened skin design concepts. Details of both preliminary and detailed design studies are presented in the paper. For the range of loads and geometry considered in this work, the hat-stiffened designs were found to be approximately 11-16 percent lighter than the sandwich designs. A down-select process was used to choose the most favorable structural concept based on a set of figures of merit, and the honeycomb sandwich design was selected as the best concept based on advantages in manufacturing cost.

The Relationship between the Entrepreneurship Characteristics and Metacognitive Awareness Levels of Pre-Service Teachers

ERIC Educational Resources Information Center

Duman, Burcu

2018-01-01

The purpose of this study is to determine the relationship between the entrepreneurship characteristics and metacognitive awareness levels of pre-service teachers. Qualitative research method is used in this study and the study is designed as a relational survey. The sample of the study was 441 pre-service teachers studying at the faculty of…

A CS1 pedagogical approach to parallel thinking

NASA Astrophysics Data System (ADS)

Rague, Brian William

Almost all collegiate programs in Computer Science offer an introductory course in programming primarily devoted to communicating the foundational principles of software design and development. The ACM designates this introduction to computer programming course for first-year students as CS1, during which methodologies for solving problems within a discrete computational context are presented. Logical thinking is highlighted, guided primarily by a sequential approach to algorithm development and made manifest by typically using the latest, commercially successful programming language. In response to the most recent developments in accessible multicore computers, instructors of these introductory classes may wish to include training on how to design workable parallel code. Novel issues arise when programming concurrent applications which can make teaching these concepts to beginning programmers a seemingly formidable task. Student comprehension of design strategies related to parallel systems should be monitored to ensure an effective classroom experience. This research investigated the feasibility of integrating parallel computing concepts into the first-year CS classroom. To quantitatively assess student comprehension of parallel computing, an experimental educational study using a two-factor mixed group design was conducted to evaluate two instructional interventions in addition to a control group: (1) topic lecture only, and (2) topic lecture with laboratory work using a software visualization Parallel Analysis Tool (PAT) specifically designed for this project. A new evaluation instrument developed for this study, the Perceptions of Parallelism Survey (PoPS), was used to measure student learning regarding parallel systems. The results from this educational study show a statistically significant main effect among the repeated measures, implying that student comprehension levels of parallel concepts as measured by the PoPS improve immediately after the delivery of any initial three-week CS1 level module when compared with student comprehension levels just prior to starting the course. Survey results measured during the ninth week of the course reveal that performance levels remained high compared to pre-course performance scores. A second result produced by this study reveals no statistically significant interaction effect between the intervention method and student performance as measured by the evaluation instrument over three separate testing periods. However, visual inspection of survey score trends and the low p-value generated by the interaction analysis (0.062) indicate that further studies may verify improved concept retention levels for the lecture w/PAT group.

Risk factors and study designs used in research of youths' suicide behaviour-an epidemiological discussion with focus on level of evidence.

PubMed

Christiansen, Erik; Larsen, Kim Juul; Agerbo, Esben; Bilenberg, Niels; Stenager, Elsebeth

2014-11-01

Abstract Introduction: Many different epidemiology study designs have been used to analyse risk factors for suicide behaviour. The purpose of this study was to obtain an insight into the current study design used in research on youths' risk factors for suicide behaviour and to rank the studies according to level of evidence (LoE). We searched PubMed and psycINFO in order to identify relevant individual studies. We included 36 studies of children and youth on suicidal behaviour and ideation-many rank low on LoE. For suicide, cohort design was often used, and mental illness (depression, substance abuse and severity of mental illness) was the most common risk factor. Cohort studies are ranked 2b, which is high according to LoE. For suicide attempts, survey was often used, and psychopathology, substance abuse and being exposed to suicidal behaviour were the most common risk factors. For suicidal ideation, survey was the only design used, and substance abuse and psychopathology the most common risk factors. Surveys are ranked 4, which are low according to LoE. Many risk factors were broad and unspecific, and standard definitions of outcome and exposure were rarely used. A good study of risk factors for suicidal behaviour would need a high LoE, as a high-powered longitudinal epidemiological study (cohort or case-control) of very specific risk factors. The factors would have high prevention potential, compared with more broad and unspecific risk factors, to which many people are exposed. We would recommend a cohort design (in high-risk populations) or a case-control design to identify risk factors, using clinical and/or register data instead of self-reported information, reporting adjusted estimates and using standard definition of suicidal outcome and risk factors.

Propulsion integration of hypersonic air-breathing vehicles utilizing a top-down design methodology

NASA Astrophysics Data System (ADS)

Kirkpatrick, Brad Kenneth

In recent years, a focus of aerospace engineering design has been the development of advanced design methodologies and frameworks to account for increasingly complex and integrated vehicles. Techniques such as parametric modeling, global vehicle analyses, and interdisciplinary data sharing have been employed in an attempt to improve the design process. The purpose of this study is to introduce a new approach to integrated vehicle design known as the top-down design methodology. In the top-down design methodology, the main idea is to relate design changes on the vehicle system and sub-system level to a set of over-arching performance and customer requirements. Rather than focusing on the performance of an individual system, the system is analyzed in terms of the net effect it has on the overall vehicle and other vehicle systems. This detailed level of analysis can only be accomplished through the use of high fidelity computational tools such as Computational Fluid Dynamics (CFD) or Finite Element Analysis (FEA). The utility of the top-down design methodology is investigated through its application to the conceptual and preliminary design of a long-range hypersonic air-breathing vehicle for a hypothetical next generation hypersonic vehicle (NHRV) program. System-level design is demonstrated through the development of the nozzle section of the propulsion system. From this demonstration of the methodology, conclusions are made about the benefits, drawbacks, and cost of using the methodology.

Corrosion behaviour of steel rebars embedded in a concrete designed for the construction of an intermediate-level radioactive waste disposal facility

NASA Astrophysics Data System (ADS)

Duffó, G. S.; Arva, E. A.; Schulz, F. M.; Vazquez, D. R.

2013-07-01

The National Atomic Energy Commission of the Argentine Republic is developing a nuclear waste disposal management programme that contemplates the design and construction of a facility for the final disposal of intermediate-level radioactive wastes. The repository is based on the use of multiple, independent and redundant barriers. The major components are made in reinforced concrete so, the durability of these structures is an important aspect for the facility integrity. This work presents an investigation performed on an instrumented reinforced concrete prototype specifically designed for this purpose, to study the behaviour of an intermediate level radioactive waste disposal facility from the rebar corrosion point of view. The information obtained will be used for the final design of the facility in order to guarantee a service life more or equal than the foreseen durability for this type of facilities.

METHODOLOGICAL ISSUES IN HUMAN EXPOSURE STUDIES OF LOW LEVEL SOLVENT MIXTURES

EPA Science Inventory

The design of appropriate studies to assess the sensory irritant and neurobehavioral-effects of exposure to complex VOC mixtures poses a variety of methodological challenges, particularly at the low levels found in new buildings. or instance, Otto et al (1989) exposed subjects to...

Literacy Skills among Academically Underprepared Students

ERIC Educational Resources Information Center

Perin, Dolores

2013-01-01

A review of studies published from 2000 to 2012 was conducted to describe the literacy skills of underprepared postsecondary students, identify teaching approaches designed to bring their skills to the college level, and determine methods of embedding developmental instruction in college-level course work. The studies pinpointed numerous weak…

Rationale and design of the GUIDE-IT study: Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure.

PubMed

Felker, G Michael; Ahmad, Tariq; Anstrom, Kevin J; Adams, Kirkwood F; Cooper, Lawton S; Ezekowitz, Justin A; Fiuzat, Mona; Houston-Miller, Nancy; Januzzi, James L; Leifer, Eric S; Mark, Daniel B; Desvigne-Nickens, Patrice; Paynter, Gayle; Piña, Ileana L; Whellan, David J; O'Connor, Christopher M

2014-10-01

The GUIDE-IT (Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure) study is designed to determine the safety, efficacy, and cost-effectiveness of a strategy of adjusting therapy with the goal of achieving and maintaining a target N-terminal pro-B-type natriuretic peptide (NT-proBNP) level of <1,000 pg/ml compared with usual care in high-risk patients with systolic heart failure (HF). Elevations in natriuretic peptide (NP) levels provide key prognostic information in patients with HF. Therapies proven to improve outcomes in patients with HF are generally associated with decreasing levels of NPs, and observational data show that decreases in NP levels over time are associated with favorable outcomes. Results from smaller prospective, randomized studies of this strategy thus far have been mixed, and current guidelines do not recommend serial measurement of NP levels to guide therapy in patients with HF. GUIDE-IT is a prospective, randomized, controlled, unblinded, multicenter clinical trial designed to randomize approximately 1,100 high-risk subjects with systolic HF (left ventricular ejection fraction ≤40%) to either usual care (optimized guideline-recommended therapy) or a strategy of adjusting therapy with the goal of achieving and maintaining a target NT-proBNP level of <1,000 pg/ml. Patients in either arm of the study are followed up at regular intervals and after treatment adjustments for a minimum of 12 months. The primary endpoint of the study is time to cardiovascular death or first hospitalization for HF. Secondary endpoints include time to cardiovascular death and all-cause mortality, cumulative mortality, health-related quality of life, resource use, cost-effectiveness, and safety. The GUIDE-IT study is designed to definitively assess the effects of an NP-guided strategy in high-risk patients with systolic HF on clinically relevant endpoints of mortality, hospitalization, quality of life, and medical resource use. (Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure [GUIDE-IT]; NCT01685840). Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

An assessment of tailoring of lightning protection design requirements for a composite wing structure on a metallic aircraft

NASA Technical Reports Server (NTRS)

Harwood, T. L.

1991-01-01

The Navy A-6E aircraft is presently being modified with a new wing which uses graphite/epoxy structures and substructures around a titanium load-bearing structure. The ability of composites to conduct electricity is less than that of aluminum. This is cause for concern when the wing may be required to conduct large lightning currents. The manufacturer attempted to solve lightning protection issues by performing a risk assessment based on a statistical approach which allows relaxation of the wing lightning protection design levels over certain locations of the composite wing. A sensitivity study is presented designed to define the total risk of relaxation of the design levels.

Techniques for Conducting Effective Concept Design and Design-to-Cost Trade Studies

NASA Technical Reports Server (NTRS)

Di Pietro, David A.

2015-01-01

Concept design plays a central role in project success as its product effectively locks the majority of system life cycle cost. Such extraordinary leverage presents a business case for conducting concept design in a credible fashion, particularly for first-of-a-kind systems that advance the state of the art and that have high design uncertainty. A key challenge, however, is to know when credible design convergence has been achieved in such systems. Using a space system example, this paper characterizes the level of convergence needed for concept design in the context of technical and programmatic resource margins available in preliminary design and highlights the importance of design and cost evaluation learning curves in determining credible convergence. It also provides techniques for selecting trade study cases that promote objective concept evaluation, help reveal unknowns, and expedite convergence within the trade space and conveys general practices for conducting effective concept design-to-cost studies.

Design of micro bending deformer for optical fiber weight sensor

NASA Astrophysics Data System (ADS)

Ula, R. K.; Hanto, D.; Waluyo, T. B.; Adinanta, H.; Widiyatmoko, B.

2017-04-01

The road damage due to excessive load is one of the causes of accidents on the road. A device to measure weight of the passing vehicles needs to be planted in the road structure. Thus, a weight sensor for the passing vehicles is required. In this study, we designed a weight sensor for a static load based on a power loss due to a micro bending on the optical fiber flanked on a board. The following main components are used i.e. LED 1310 nm as a light source, a multimode fiber optic as a transmission media and a power meter for measuring power loss. This works focuses on obtaining a suitable deformer design for weight sensor. Experimental results show that deformer design with 1.5 mm single side has level of accuracy as 4.32% while the design with 1.5 mm double side has level of accuracy as 98.77%. Increasing deformer length to 2.5 mm gives 71.18% level of accuracy for single side, and 76.94% level of accuracy for double side. Micro bending design with 1.5 mm double side has a high sensitivity and it is also capable of measuring load up to 100 kg. The sensor designed has been tested for measuring the weight of motor cycle, and it can be upgraded for measuring heavy vehicles.

Analytical fuel property effects: Small combustors, phase 2

NASA Technical Reports Server (NTRS)

Hill, T. G.; Monty, J. D.; Morton, H. L.

1985-01-01

The effects of non-standard aviation fuels on a typical small gas turbine combustor were studied and the effectiveness of design changes intended to counter the effects of these fuels was evaluated. The T700/CT7 turboprop engine family was chosen as being representative of the class of aircraft power plants desired for this study. Fuel properties, as specified by NASA, are characterized by low hydrogen content and high aromatics levels. No. 2 diesel fuel was also evaluated in this program. Results demonstrated the anticipated higher than normal smoke output and flame radiation intensity with resulting increased metal temperatures on the baseline T700 combustor. Three new designs were evaluated using the non standard fuels. The three designs incorporated enhanced cooling features and smoke reduction features. All three designs, when burning the broad specification fuels, exhibited metal temperatures at or below the baseline combustor temperatures on JP-5. Smoke levels were acceptable but higher than predicted.

Guiding without feeling guided: Implicit scaffolding through interactive simulation design

NASA Astrophysics Data System (ADS)

Paul, Ariel; Podolefsky, Noah; Perkins, Katherine

2013-01-01

While PhET interactive simulations (sims) were historically designed for college students, they are used at lower grade levels, and we are currently developing sims targeted at middle school (MS). In studying how MS students interact with and learn from these sims, we have been extracting insights about design for the middle-grade-levels and across K-16. This collection of work has highlighted the importance of implicit scaffolding, a design framework that reduces the amount of explicit instruction needed to facilitate learning. We present a case study of redesigning a sim - Energy Skate Park (ESP) - for effective use in MS. We conducted think-aloud interviews with MS students to identify successful features, sources of confusion or unproductive distraction, as well as features inconsistent with gradeappropriate learning goals. Drawing on these data and the principle of implicit scaffolding, we developed Energy Skate Park Basics (ESPB). Interviews on ESPB demonstrate increased usability and learning for MS students.

[Introduction to critical reading of articles: study design and biases].

PubMed

García Villar, C

2015-01-01

The critical evaluation of an article enables professionals to make good use of the new information and therefore has direct repercussions for the benefit of our patients. Before undertaking a detailed critical reading of the chosen article, we need to consider whether the study used the most appropriate design for the question it aimed to answer (i.e., whether the level of evidence is adequate). To do this, we need to know how to classify studies in function of their design (descriptive or analytical; prospective or retrospective; cross-sectional or longitudinal) as well as their correlation with the levels of evidence. In critical reading it is also important to know the main systematic errors or biases that can affect a study. Biases can appear in any phase of a study; they can affect the sample, the development of the study, or the measurement of the results. Copyright © 2014 SERAM. Published by Elsevier España, S.L.U. All rights reserved.

Assessing the Reliability of Regional Depth-Duration-Frequency Equations for Gauged and Ungauged Sites

NASA Astrophysics Data System (ADS)

Castellarin, A.; Montanari, A.; Brath, A.

2002-12-01

The study derives Regional Depth-Duration-Frequency (RDDF) equations for a wide region of northern-central Italy (37,200 km 2) by following an adaptation of the approach originally proposed by Alila [WRR, 36(7), 2000]. The proposed RDDF equations have a rather simple structure and allow an estimation of the design storm, defined as the rainfall depth expected for a given storm duration and recurrence interval, in any location of the study area for storm durations from 1 to 24 hours and for recurrence intervals up to 100 years. The reliability of the proposed RDDF equations represents the main concern of the study and it is assessed at two different levels. The first level considers the gauged sites and compares estimates of the design storm obtained with the RDDF equations with at-site estimates based upon the observed annual maximum series of rainfall depth and with design storm estimates resulting from a regional estimator recently developed for the study area through a Hierarchical Regional Approach (HRA) [Gabriele and Arnell, WRR, 27(6), 1991]. The second level performs a reliability assessment of the RDDF equations for ungauged sites by means of a jack-knife procedure. Using the HRA estimator as a reference term, the jack-knife procedure assesses the reliability of design storm estimates provided by the RDDF equations for a given location when dealing with the complete absence of pluviometric information. The results of the analysis show that the proposed RDDF equations represent practical and effective computational means for producing a first guess of the design storm at the available raingauges and reliable design storm estimates for ungauged locations. The first author gratefully acknowledges D.H. Burn for sponsoring the submission of the present abstract.

Cognitive Task Analysis, Interface Design, and Technical Troubleshooting.

ERIC Educational Resources Information Center

Steinberg, Linda S.; Gitomer, Drew H.

A model of the interface design process is proposed that makes use of two interdependent levels of cognitive analysis: the study of the criterion task through an analysis of expert/novice differences and the evaluation of the working user interface design through the application of a practical interface analysis methodology (GOMS model). This dual…

Quality Problem-Based Learning Experiences for Students: Design Deliberations among Teachers from Diverse Disciplines.

ERIC Educational Resources Information Center

Butler, Susan McAleenan

This qualitative study, investigating the claims, concerns, and issues arising within the design stages of problem-based learning (PBL) curriculum units, was conducted during two masters-level classes during the summer of 1999. A hermeneutic dialectic discourse among veteran teachers (who were novice PBL curriculum designers) was facilitated by…

Designing Instruction for Speed: Qualitative Insights into Instructional Design for Accelerated Online Graduate Coursework

ERIC Educational Resources Information Center

Trekles, Anastasia M.; Sims, Roderick

2013-01-01

The purpose of this exploratory case study was to explore instructional design strategies and characteristics of online, asynchronous accelerated courses and students' choices of deep or surface learning approaches within this environment. An increasing number of university programs, particularly at the graduate level, are moving to an…

Panel Design Variations in the Multistage Test Using the Mixed-Format Tests

ERIC Educational Resources Information Center

Kim, Jiseon; Chung, Hyewon; Dodd, Barbara G.; Park, Ryoungsun

2012-01-01

This study compared various panel designs of the multistage test (MST) using mixed-format tests in the context of classification testing. Simulations varied the design of the first-stage module. The first stage was constructed according to three levels of test information functions (TIFs) with three different TIF centers. Additional computerized…

Interior Design and Housing. 7055. Curriculum Guide.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational and Technical Education Services.

This curriculum guide was developed as a resource for teachers to use in planning and implementing a competency-based instructional program on interior design and housing at the high school level. It contains materials for a 2-semester course, based on the North Carolina Vocational Education Program of Studies (revised 1992); it is designed to…

Factors Associated with the Performance and Cost-Effectiveness of Using Lymphatic Filariasis Transmission Assessment Surveys for Monitoring Soil-Transmitted Helminths: A Case Study in Kenya

PubMed Central

Smith, Jennifer L.; Sturrock, Hugh J. W.; Assefa, Liya; Nikolay, Birgit; Njenga, Sammy M.; Kihara, Jimmy; Mwandawiro, Charles S.; Brooker, Simon J.

2015-01-01

Transmission assessment surveys (TAS) for lymphatic filariasis have been proposed as a platform to assess the impact of mass drug administration (MDA) on soil-transmitted helminths (STHs). This study used computer simulation and field data from pre- and post-MDA settings across Kenya to evaluate the performance and cost-effectiveness of the TAS design for STH assessment compared with alternative survey designs. Variations in the TAS design and different sample sizes and diagnostic methods were also evaluated. The district-level TAS design correctly classified more districts compared with standard STH designs in pre-MDA settings. Aggregating districts into larger evaluation units in a TAS design decreased performance, whereas age group sampled and sample size had minimal impact. The low diagnostic sensitivity of Kato-Katz and mini-FLOTAC methods was found to increase misclassification. We recommend using a district-level TAS among children 8–10 years of age to assess STH but suggest that key consideration is given to evaluation unit size. PMID:25487730

Optimal placement of trailing-edge flaps for helicopter vibration reduction using response surface methods

NASA Astrophysics Data System (ADS)

Viswamurthy, S. R.; Ganguli, Ranjan

2007-03-01

This study aims to determine optimal locations of dual trailing-edge flaps to achieve minimum hub vibration levels in a helicopter, while incurring low penalty in terms of required trailing-edge flap control power. An aeroelastic analysis based on finite elements in space and time is used in conjunction with an optimal control algorithm to determine the flap time history for vibration minimization. The reduced hub vibration levels and required flap control power (due to flap motion) are the two objectives considered in this study and the flap locations along the blade are the design variables. It is found that second order polynomial response surfaces based on the central composite design of the theory of design of experiments describe both objectives adequately. Numerical studies for a four-bladed hingeless rotor show that both objectives are more sensitive to outboard flap location compared to the inboard flap location by an order of magnitude. Optimization results show a disjoint Pareto surface between the two objectives. Two interesting design points are obtained. The first design gives 77 percent vibration reduction from baseline conditions (no flap motion) with a 7 percent increase in flap power compared to the initial design. The second design yields 70 percent reduction in hub vibration with a 27 percent reduction in flap power from the initial design.

Using Systems Theory to Examine Patient and Nurse Structures, Processes, and Outcomes in Centralized and Decentralized Units.

PubMed

Real, Kevin; Fay, Lindsey; Isaacs, Kathy; Carll-White, Allison; Schadler, Aric

2018-01-01

This study utilizes systems theory to understand how changes to physical design structures impact communication processes and patient and staff design-related outcomes. Many scholars and researchers have noted the importance of communication and teamwork for patient care quality. Few studies have examined changes to nursing station design within a systems theory framework. This study employed a multimethod, before-and-after, quasi-experimental research design. Nurses completed surveys in centralized units and later in decentralized units ( N = 26 pre , N = 51 post ). Patients completed surveys ( N = 62 pre ) in centralized units and later in decentralized units ( N = 49 post ). Surveys included quantitative measures and qualitative open-ended responses. Patients preferred the decentralized units because of larger single-occupancy rooms, greater privacy/confidentiality, and overall satisfaction with design. Nurses had a more complex response. Nurses approved the patient rooms, unit environment, and noise levels in decentralized units. However, they reported reduced access to support spaces, lower levels of team/mentoring communication, and less satisfaction with design than in centralized units. Qualitative findings supported these results. Nurses were more positive about centralized units and patients were more positive toward decentralized units. The results of this study suggest a need to understand how system components operate in concert. A major contribution of this study is the inclusion of patient satisfaction with design, an important yet overlooked fact in patient satisfaction. Healthcare design researchers and practitioners may consider how changing system interdependencies can lead to unexpected changes to communication processes and system outcomes in complex systems.

Organizational Socialization and Its Relation with Organizational Performance in High Schools

ERIC Educational Resources Information Center

Balci, Ali; Ozturk, Inci; Polatcan, Mahmut; Saylik, Ahmet; Bil, Erkut

2016-01-01

This study is designed to explore organizational socialization and organizational performance levels of secondary school teachers and the relation between the two variables mentioned. The study is designed as correlational research. The target population of the research consists of 5744 teachers who work in public and private Anatolian high…

Designing Large-Scale Multisite and Cluster-Randomized Studies of Professional Development

ERIC Educational Resources Information Center

Kelcey, Ben; Spybrook, Jessaca; Phelps, Geoffrey; Jones, Nathan; Zhang, Jiaqi

2017-01-01

We develop a theoretical and empirical basis for the design of teacher professional development studies. We build on previous work by (a) developing estimates of intraclass correlation coefficients for teacher outcomes using two- and three-level data structures, (b) developing estimates of the variance explained by covariates, and (c) modifying…

The Design of Workshops for Asian Second Level Schools. Study 5.

ERIC Educational Resources Information Center

Khan, Khurshid A.; Vickery, D. J.

The utilization of workshop accomodations in the countries of the Asian Region are examined and the study concludes that, in most schools, a single multipurpose workshop is more economical than the separate workshops for separate crafts that are in common use at present. Design criteria are developed for multipurpose "industrial arts"…

Can Coloring Mandalas Reduce Anxiety? A Replication Study

ERIC Educational Resources Information Center

van der Vennet, Renee; Serice, Susan

2012-01-01

This experimental study replicated Curry and Kasser's (2005) research that tested whether coloring a mandala would reduce anxiety. After inducing an anxious mood via a writing activity, participants were randomly assigned to three groups that colored either on a mandala design, on a plaid design, or on a blank paper. Anxiety level was measured…

Research-Practice Interactions as Reported in Recent Design Studies: Still Promising, Still Hazy

ERIC Educational Resources Information Center

Ormel, Bart J. B.; Pareja Roblin, Natalie N.; McKenney, Susan E.; Voogt, Joke M.; Pieters, Jules M.

2012-01-01

This study portrays recent research-practice connections found in 18 design research reports focusing on the creation of instructional solutions. Solutions in different stages of development varied greatly in duration, ranging from one lesson to a whole year curriculum, spanned all levels of education, many subjects (science, math, language,…

Embedding Sustainability in Education through Experiential Learning Using Innovation and Entrepreneurship

ERIC Educational Resources Information Center

Belkhir, Lotfi

2015-01-01

In this pedagogical study, we introduce the design and findings of a pilot study on the effectiveness of a new Engineering graduate course, "Total Sustainability Management", in teaching and learning sustainability, both at the cognitive and the management level. The design of an "arms-length" anonymized pre- and post-course…

An Examination of Self-Directed Learning Readiness in Executive-Level Fire Officers

ERIC Educational Resources Information Center

Knight, Steven G.

2012-01-01

The purpose of this study was to examine the self-directed learning readiness in executive fire officers in relation to the independent variables of personality type, educational attainment, and professional designation. This research utilized a quantitative design. This study utilized the Myers-Briggs Type Indicator (MBTI) and the Self-Directed…

Implementation E-Learning among Jordanian School's Management

ERIC Educational Resources Information Center

Hamadin, Khaled

2017-01-01

This study is designed to determine the level of E-learning Implementation in Jordan schools management. The study also investigated the Implementation of secondary School management towards the use of e-learning. A survey research design was used. A questionnaire was adopted and sent to secondary School management (N = 250) in Jordan schools in…

"From the Formal to the Innovative": The Use of Case Studies and Sustainable Projects in Developing a Design Process Model for Educating Product/Industrial Designers

ERIC Educational Resources Information Center

Oakes, G. L.; Felton, A. J.; Garner, K. B.

2006-01-01

The BSc in computer aided product design (CAPD) course at the University of Wolverhampton was conceived as a collaborative venture in 1989 between the School of Engineering and the School of Art and Design. The award was at the forefront of forging interdisciplinary collaboration at undergraduate level in the field of product design. It has…

Effect of experimental design on production responses in high-producing dairy cows fed two levels of metabolizable protein

USDA-ARS?s Scientific Manuscript database

Results from studies on lactation responses to diet have been hypothesized to be affected by the use of change-over (CHANGE) instead of continuous (CONT) experimental designs; a direct test of this hypothesis has not been well-studied. The objective of this study was to evaluate the effects of reduc...

Design approaches to experimental mediation☆

PubMed Central

Pirlott, Angela G.; MacKinnon, David P.

2016-01-01

Identifying causal mechanisms has become a cornerstone of experimental social psychology, and editors in top social psychology journals champion the use of mediation methods, particularly innovative ones when possible (e.g. Halberstadt, 2010, Smith, 2012). Commonly, studies in experimental social psychology randomly assign participants to levels of the independent variable and measure the mediating and dependent variables, and the mediator is assumed to causally affect the dependent variable. However, participants are not randomly assigned to levels of the mediating variable(s), i.e., the relationship between the mediating and dependent variables is correlational. Although researchers likely know that correlational studies pose a risk of confounding, this problem seems forgotten when thinking about experimental designs randomly assigning participants to levels of the independent variable and measuring the mediator (i.e., “measurement-of-mediation” designs). Experimentally manipulating the mediator provides an approach to solving these problems, yet these methods contain their own set of challenges (e.g., Bullock, Green, & Ha, 2010). We describe types of experimental manipulations targeting the mediator (manipulations demonstrating a causal effect of the mediator on the dependent variable and manipulations targeting the strength of the causal effect of the mediator) and types of experimental designs (double randomization, concurrent double randomization, and parallel), provide published examples of the designs, and discuss the strengths and challenges of each design. Therefore, the goals of this paper include providing a practical guide to manipulation-of-mediator designs in light of their challenges and encouraging researchers to use more rigorous approaches to mediation because manipulation-of-mediator designs strengthen the ability to infer causality of the mediating variable on the dependent variable. PMID:27570259

Design approaches to experimental mediation.

PubMed

Pirlott, Angela G; MacKinnon, David P

2016-09-01

Identifying causal mechanisms has become a cornerstone of experimental social psychology, and editors in top social psychology journals champion the use of mediation methods, particularly innovative ones when possible (e.g. Halberstadt, 2010, Smith, 2012). Commonly, studies in experimental social psychology randomly assign participants to levels of the independent variable and measure the mediating and dependent variables, and the mediator is assumed to causally affect the dependent variable. However, participants are not randomly assigned to levels of the mediating variable(s), i.e., the relationship between the mediating and dependent variables is correlational. Although researchers likely know that correlational studies pose a risk of confounding, this problem seems forgotten when thinking about experimental designs randomly assigning participants to levels of the independent variable and measuring the mediator (i.e., "measurement-of-mediation" designs). Experimentally manipulating the mediator provides an approach to solving these problems, yet these methods contain their own set of challenges (e.g., Bullock, Green, & Ha, 2010). We describe types of experimental manipulations targeting the mediator (manipulations demonstrating a causal effect of the mediator on the dependent variable and manipulations targeting the strength of the causal effect of the mediator) and types of experimental designs (double randomization, concurrent double randomization, and parallel), provide published examples of the designs, and discuss the strengths and challenges of each design. Therefore, the goals of this paper include providing a practical guide to manipulation-of-mediator designs in light of their challenges and encouraging researchers to use more rigorous approaches to mediation because manipulation-of-mediator designs strengthen the ability to infer causality of the mediating variable on the dependent variable.

A Study of the System Safety Concept as it Relates to the New Walter Reed Army Medical Center, Washington, DC.

DTIC Science & Technology

1978-03-31

established the safety level of the% * originally designed facility and the extent of current safety * modifications. The objectives evaluated the...Program could identify many safety hazards thus leading to design improvements. The study provided several recommendations to formalize the Systems Safety... design , construction, and proposed systems management of the new Walter Reed Army Medical Center (WRAMC), Washington, D.C., was conducted during the

Solid-state X-band Combiner Study

NASA Technical Reports Server (NTRS)

Pitzalis, O., Jr.; Russell, K. J.

1979-01-01

The feasibility of developing solid-state amplifiers at 4 and 10 GHz for application in spacecraft altimeters was studied. Bipolar-transistor, field-effect-transistor, and Impatt-diode amplifier designs based on 1980 solid-state technology are investigated. Several output power levels of the pulsed, low-duty-factor amplifiers are considered at each frequency. Proposed transistor and diode amplifier designs are illustrated in block diagrams. Projections of size, weight, and primary power requirements are given for each design.

Integrated flight/propulsion control system design based on a decentralized, hierarchical approach

NASA Technical Reports Server (NTRS)

Mattern, Duane; Garg, Sanjay; Bullard, Randy

1989-01-01

A sample integrated flight/propulsion control system design is presented for the piloted longitudinal landing task with a modern, statistically unstable fighter aircraft. The design procedure is summarized. The vehicle model used in the sample study is described, and the procedure for partitioning the integrated system is presented along with a description of the subsystems. The high-level airframe performance specifications and control design are presented and the control performance is evaluated. The generation of the low-level (engine) subsystem specifications from the airframe requirements are discussed, and the engine performance specifications are presented along with the subsystem control design. A compensator to accommodate the influence of airframe outputs on the engine subsystem is also considered. Finally, the entire closed loop system performance and stability characteristics are examined.

Integrated flight/propulsion control system design based on a decentralized, hierarchical approach

NASA Technical Reports Server (NTRS)

Mattern, Duane; Garg, Sanjay; Bullard, Randy

1989-01-01

A sample integrated flight/propulsion control system design is presented for the piloted longitiudinal landing task with a modern, statistically unstable fighter aircraft. The design procedure is summarized, the vehicle model used in the sample study is described, and the procedure for partitioning the integrated system is presented along with a description of the subsystems. The high-level airframe performance specifications and control design are presented and the control performance is evaluated. The generation of the low-level (engine) subsystem specifications from the airframe requirements are discussed, and the engine performance specifications are presented along with the subsystem control design. A compensator to accommodate the influence of airframe outputs on the engine subsystem is also considered. Finally, the entire closed loop system performance and stability characteristics are examined.

Hybrid PV/diesel solar power system design using multi-level factor analysis optimization

NASA Astrophysics Data System (ADS)

Drake, Joshua P.

Solar power systems represent a large area of interest across a spectrum of organizations at a global level. It was determined that a clear understanding of current state of the art software and design methods, as well as optimization methods, could be used to improve the design methodology. Solar power design literature was researched for an in depth understanding of solar power system design methods and algorithms. Multiple software packages for the design and optimization of solar power systems were analyzed for a critical understanding of their design workflow. In addition, several methods of optimization were studied, including brute force, Pareto analysis, Monte Carlo, linear and nonlinear programming, and multi-way factor analysis. Factor analysis was selected as the most efficient optimization method for engineering design as it applied to solar power system design. The solar power design algorithms, software work flow analysis, and factor analysis optimization were combined to develop a solar power system design optimization software package called FireDrake. This software was used for the design of multiple solar power systems in conjunction with an energy audit case study performed in seven Tibetan refugee camps located in Mainpat, India. A report of solar system designs for the camps, as well as a proposed schedule for future installations was generated. It was determined that there were several improvements that could be made to the state of the art in modern solar power system design, though the complexity of current applications is significant.

Case Managers for High-Risk, High-Cost Patients as Agents and Street-Level Bureaucrats.

PubMed

Swanson, Jeffrey; Weissert, William G

2017-08-01

Case management programs often designate a nurse or social worker to take responsibility for guiding care when patients are expected to be expensive or risk a major decline. We hypothesized that though an intuitively appealing idea, careful program design and faithful implementation are essential if case management programs are to succeed. We employed two theory perspectives, principal-agent framework and street-level bureaucratic theory to describe the relationship between program designers (principals) and case managers (agents/street-level bureaucrats) to review 65 case management studies. Most programs were successful in limited program-specific process and outcome goals. But there was much less success in cost-saving or cost-effectiveness-the original and overarching goal of case management. Cost results might be improved if additional ideas of agency and street-level theory were adopted, specifically, incentives, as well as "green tape," clear rules, guidelines, and algorithms relating to resource allocation among patients.

Governmental designation of spine specialty hospitals, their characteristics, performance and designation effects: a longitudinal study in Korea.

PubMed

Kim, Sun Jung; Yoo, Ji Won; Lee, Sang Gyu; Kim, Tae Hyun; Han, Kyu-Tae; Park, Eun-Cheol

2014-11-13

This study compares the characteristics and performance of spine specialty hospitals versus other types of hospitals for inpatients with spinal diseases in South Korea. We also assessed the effect of the government's specialty hospital designation on hospital operating efficiency. We used data of 823 hospitals including 17 spine specialty hospitals in Korea. All spine disease-related inpatient claims nationwide (N=645 449) during 2010-2012. No interventions were made. Using a multilevel generalised estimating equation and multilevel modelling, this study compared inpatient charges, length of stay (LOS), readmission within 30 days of discharge and in-hospital death within 30 days of admission in spine specialty versus other types of hospitals. Spine specialty hospitals had higher inpatient charges per day (27.4%) and a shorter LOS (23.5%), but per case charges were similar after adjusting for patient-level and hospital-level confounders. After government designation, spine specialty hospitals had 8.8% lower per case charges, which was derived by reduced per day charge (7.6%) and shorter LOS (1.0%). Rates of readmission also were lower in spine specialty hospitals (OR=0.796). Patient-level and hospital-level factors both played important roles in determining outcome measures. Spine specialty hospitals had higher per day inpatient charges but a much shorter LOS than other types of hospitals due to their specialty volume and experience. In addition, their readmission rate was lower. Spine specialty hospitals also endeavoured to be more efficient after governmental 'specialty' designation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Road Traffic Noise Pollution Analysis for Cernavoda City

NASA Astrophysics Data System (ADS)

Manea, L.; Manea, A.; Florea, D.; Tarulescu, S.

2017-10-01

In the present paper was studied the noise pollution in Cernavodă city. The noise measurements were made for nine intersections from different city areas. Noise measurements were taken for three chosen routes with high population density, heavy traffic, commercial and residential buildings. Average, maximum and minimum values were collected and compared with standards. The impact of road traffic noise on the community depends on various factors such as road location and design, land use planning measures, building design, traffic composition, driver behaviour and the relief. In the study area 9 locations are identified to measure noise level. By using sound level meter noise levels are measured at different peak sessions i.e. morning, afternoon and evening. The presented values were collected for evening rush hour.

Continuous Classroom Assessment at Primary Level

ERIC Educational Resources Information Center

Ali, Imtiaz; Shah, Syed Manzoor Hussein; Gujjar, Aijaz Ahmed

2014-01-01

This study was designed to analyze the continuous classroom assessment at primary level in Pakistan. Findings of the study revealed that the students' achievement of single class teacher in the subject of English, General science, Urdu and mathematics were almost on average and rubric observation during continuous classroom assessment ranked…

Addressing Enterprise-Level Information System Deficiencies

DTIC Science & Technology

2015-03-26

goals and effectiveness. This case study evaluates the Depot Source of Repair (DSOR) team and how it has addressed the USAF’s enterprise- level IS...deficiencies. A framework created from the literature review is used to evaluate the DSOR team’s IS called DSOR II. The case study evaluation ...7 IS Design Evaluation

Effects of a Multicultural Perspectives Course on Teacher Candidates' Intercultural Competence

ERIC Educational Resources Information Center

Xu, Yaoying; Hao, Chenfang; Huennekens, Mary Ellen

2016-01-01

Purpose: The purpose of this study was to investigate the intercultural competence of pre-service special education teacher candidates through the contents of a graduate-level multicultural perspectives course. Design/methodology/approach: This study used a graduate-level multicultural perspectives course to examine the intercultural competence of…

Impact of Climate Change and Sea Level Rise on Stormwater Design and Reoccurring Flooding Problems in the Hampton Roads Region

DOT National Transportation Integrated Search

2016-06-01

The information contained in this report is organized as three separate but related research studies. Collectively, these studies investigate the impact of climate change and sea level rise on transportation infrastructure within portions of the Hamp...

Dimensions of Cognitive Dissonance and the Level of Job Satisfaction among Counsellors in Delta and Edo States, Nigeria

ERIC Educational Resources Information Center

Oduh, William Akporobaroh

2016-01-01

This study examined the dimensions of cognitive dissonance and the extent to which cognitive dissonance could influence the level of job satisfaction of guidance counsellors. The study was guided by three research questions and one null hypothesis. The design of the study was correlational survey. The population of the study was 158 practising…

A Study of Curriculum Literacy and Information Literacy Levels of Teacher Candidates in Department of Social Sciences Education

ERIC Educational Resources Information Center

Sural, Serhat; Dedebali, Nurhak Cem

2018-01-01

The present study aims to investigate information literacy and curriculum literacy levels of teacher candidates and to identify the relationship between them through their course of study at Faculty of Education. The research model was designed as quantitative one and general screening model was employed. The study group is 895 students, who were…

Effects of Performance-Based Financial Incentives on Work Performance: A Study of Technical-Level Employees in the Private Sector in Sri Lanka

ERIC Educational Resources Information Center

Wickramasinghe, Vathsala; Dabere, Sampath

2012-01-01

The objective of the study is to investigate the effect of performance-based financial incentives on work performance. The study hypothesized that the design features of performance-based financial incentive schemes themselves may influence individuals' work performance. For the study, survey methodology was used and 93 technical-level employees…

Reusable Launch Vehicle Tank/Intertank Sizing Trade Study

NASA Technical Reports Server (NTRS)

Dorsey, John T.; Myers, David E.; Martin, Carl J.

2000-01-01

A tank and intertank sizing tool that includes effects of major design drivers, and which allows parametric studies to be performed, has been developed and calibrated against independent representative results. Although additional design features, such as bulkheads and field joints, are not currently included in the process, the improved level of fidelity has allowed parametric studies to be performed which have resulted in understanding of key tank and intertank design drivers, design sensitivities, and definition of preferred design spaces. The sizing results demonstrated that there were many interactions between the configuration parameters of internal/external payload, vehicle fineness ratio (half body angle), fuel arrangement (LOX-forward/LOX-aft), number of tanks, and tank shape/arrangement (number of lobes).

Asphaltic concrete overlays of rigid and flexible pavements : final report.

DOT National Transportation Integrated Search

1980-10-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

Optimization of traffic data collection for specific pavement design applications.

DOT National Transportation Integrated Search

2006-05-01

The objective of this study is to establish the minimum traffic data collection effort required for pavement design applications satisfying a maximum acceptable error under a prescribed confidence level. The approach consists of simulating the traffi...

Analytical study of interior noise control by fuselage design techniques on high-speed, propeller-driven aircraft

NASA Technical Reports Server (NTRS)

Revell, J. D.; Balena, F. J.; Koval, L. R.

1980-01-01

The acoustical treatment mass penalties required to achieve an interior noise level of 80 dBA for high speed, fuel efficient propfan-powered aircraft are determined. The prediction method used is based on theory developed for the outer shell dynamics, and a modified approach for add-on noise control element performance. The present synthesis of these methods is supported by experimental data. Three different sized aircraft are studied, including a widebody, a narrowbody and a business sized aircraft. Noise control penalties are calculated for each aircraft for two kinds of noise control designs: add-on designs, where the outer wall structure cannot be changed, and advanced designs where the outer wall stiffness level and the materials usage can be altered. For the add-on designs, the mass penalties range from 1.7 to 2.4 percent of the takeoff gross weight (TOGW) of the various aircraft, similar to preliminary estimates. Results for advanced designs show significant reductions of the mass penalties. For the advanced aluminum designs the penalties are 1.5% of TOGW, and for an all composite aircraft the penalties range from 0.74 to 1.4% of TOGW.

Software engineering and Ada in design

NASA Technical Reports Server (NTRS)

Oneill, Don

1986-01-01

Modern software engineering promises significant reductions in software costs and improvements in software quality. The Ada language is the focus for these software methodology and tool improvements. The IBM FSD approach, including the software engineering practices that guide the systematic design and development of software products and the management of the software process are examined. The revised Ada design language adaptation is revealed. This four level design methodology is detailed including the purpose of each level, the management strategy that integrates the software design activity with the program milestones, and the technical strategy that maps the Ada constructs to each level of design. A complete description of each design level is provided along with specific design language recording guidelines for each level. Finally, some testimony is offered on education, tools, architecture, and metrics resulting from project use of the four level Ada design language adaptation.

The Relationship between Attention Levels and Class Participation of First-Year Students in Classroom Teaching Departments

ERIC Educational Resources Information Center

Sezer, Adem; Inel, Yusuf; Seçkin, Ahmet Çagdas; Uluçinar, Ufuk

2017-01-01

This study aimed to detect any relationship that may exist between classroom teacher candidates' class participation and their attention levels. The research method was a convergent parallel design, mixing quantitative and qualitative research techniques, and the study group was composed of 21 freshmen studying in the Classroom Teaching Department…

SCALS: a fourth-generation study of assisted living technologies in their organisational, social, political and policy context

PubMed Central

Greenhalgh, Trisha; Shaw, Sara; Wherton, Joe; Hughes, Gemma; Lynch, Jenni; A'Court, Christine; Hinder, Sue; Fahy, Nick; Byrne, Emma; Finlayson, Alexander; Sorell, Tom; Procter, Rob; Stones, Rob

2016-01-01

Introduction Research to date into assisted living technologies broadly consists of 3 generations: technical design, experimental trials and qualitative studies of the patient experience. We describe a fourth-generation paradigm: studies of assisted living technologies in their organisational, social, political and policy context. Fourth-generation studies are necessarily organic and emergent; they view technology as part of a dynamic, networked and potentially unstable system. They use co-design methods to generate and stabilise local solutions, taking account of context. Methods and analysis SCALS (Studies in Co-creating Assisted Living Solutions) consists (currently) of 5 organisational case studies, each an English health or social care organisation striving to introduce technology-supported services to support independent living in people with health and/or social care needs. Treating these cases as complex systems, we seek to explore interdependencies, emergence and conflict. We employ a co-design approach informed by the principles of action research to help participating organisations establish, refine and evaluate their service. To that end, we are conducting in-depth ethnographic studies of people's experience of assisted living technologies (micro level), embedded in evolving organisational case studies that use interviews, ethnography and document analysis (meso level), and exploring the wider national and international context for assisted living technologies and policy (macro level). Data will be analysed using a sociotechnical framework developed from structuration theory. Ethics and dissemination Research ethics approval for the first 4 case studies has been granted. An important outcome will be lessons learned from individual co-design case studies. We will document the studies’ credibility and rigour, and assess the transferability of findings to other settings while also recognising unique aspects of the contexts in which they were generated. Academic outputs will include a cross-case analysis and progress in theory and method of fourth-generation assisted living technology research. We will produce practical guidance for organisations, policymakers, designers and service users. PMID:26880671

Social dominance explains within-ejaculate variation in sperm design in a passerine bird.

PubMed

Rojas Mora, Alfonso; Meniri, Magali; Ciprietti, Sabrina; Helfenstein, Fabrice

2017-03-04

Comparative studies suggest that sperm competition exerts stabilizing selection towards an optimal sperm design - e.g., the relative size and covariation of different sperm sections or a quantitative measure of sperm shape - that maximizes male fertility, which results in reduced levels of within-male variation in sperm morphology. Yet, these studies also reveal substantial amounts of unexplained within-ejaculate variance, and the factors presiding to the maintenance of such within-male variation in sperm design at the population level still remain to be identified. Sperm competition models predict that males should progressively invest more resources in their germline as their mating costs increase, i.e., the soma/germline allocation trade-off hypothesis. When access to fertile females is determined by social dominance, the soma/germline allocation trade-off hypothesis predicts that dominant males should invest less in the control of spermatogenesis. Hence, dominance should positively correlate with within-male variance in sperm design. In support of this hypothesis, we found that dominant house sparrow males produce ejaculates with higher levels of within-ejaculate variation in sperm design compared to subordinate males. However, after experimentally manipulating male social status, this pattern was not maintained. Our results suggest that males might control variation in sperm design according to their social status to some extent. Yet, it seems that such within-ejaculate variation in sperm design cannot be rapidly adjusted to a new status. While variation in sperm design could result from various non-exclusive sources, we discuss how strategic allocation of resources to the somatic vs. the germline functions could be an important process shaping the relationship between within-male variation in sperm design and social status.

Managing Large Scale Project Analysis Teams through a Web Accessible Database

NASA Technical Reports Server (NTRS)

O'Neil, Daniel A.

2008-01-01

Large scale space programs analyze thousands of requirements while mitigating safety, performance, schedule, and cost risks. These efforts involve a variety of roles with interdependent use cases and goals. For example, study managers and facilitators identify ground-rules and assumptions for a collection of studies required for a program or project milestone. Task leaders derive product requirements from the ground rules and assumptions and describe activities to produce needed analytical products. Disciplined specialists produce the specified products and load results into a file management system. Organizational and project managers provide the personnel and funds to conduct the tasks. Each role has responsibilities to establish information linkages and provide status reports to management. Projects conduct design and analysis cycles to refine designs to meet the requirements and implement risk mitigation plans. At the program level, integrated design and analysis cycles studies are conducted to eliminate every 'to-be-determined' and develop plans to mitigate every risk. At the agency level, strategic studies analyze different approaches to exploration architectures and campaigns. This paper describes a web-accessible database developed by NASA to coordinate and manage tasks at three organizational levels. Other topics in this paper cover integration technologies and techniques for process modeling and enterprise architectures.

Playground Designs to Increase Physical Activity Levels during School Recess: A Systematic Review

ERIC Educational Resources Information Center

Escalante, Yolanda; García-Hermoso, Antonio; Backx, Karianne; Saavedra, Jose M.

2014-01-01

School recess provides a major opportunity to increase children's physical activity levels. Various studies have described strategies to increase levels of physical activity. The purpose of this systematic review is therefore to examine the interventions proposed as forms of increasing children's physical activity levels during recess. A…

Landscape-level patterns of avian diversity in the Oregon Coast Range

Treesearch

Samuel A. Cushman; Kevin McGarigal

2003-01-01

We used a comparative mensurative landscape-level experiment to quantify the relative importance of mature forest area and fragmentation and differences among watersheds in influencing avian community diversity in the Oregon Coast Range, USA. Our study design included three large hydrological basins, two levels of fragmentation, and six levels of mature forest area. We...

Effects of Asynchronous Music on Students' Lesson Satisfaction and Motivation at the Situational Level

ERIC Educational Resources Information Center

Digelidis, Nikolaos; Karageorghis, Costas I.; Papapavlou, Anastasia; Papaioannou, Athanasios G.

2014-01-01

The aim of this study was to examine the effects of asynchronous (background) music on senior students' motivation and lesson satisfaction at the situational level. A counterbalanced mixed-model design was employed with two factors comprising condition (three levels) and gender (two levels). Two hundred students (82 boys, 118 girls; M [subscript…

Evaluating Learning Management System (LMS)-facilitated Delivery of Universal Design for Learning (UDL)

NASA Astrophysics Data System (ADS)

Bryans Bongey, Sarah

This quantitative study involved 157 students in two sections of an undergraduate class in general biology, as well as one instructor who taught both sections of the course. It used resources from the Center for Applied Special Technologies (CAST) to evaluate the viability of a Learning Management System (LMS) to provide Universal Design for Learning (UDL). It also measured and tracked the instructor's level of efficacy in sustaining UDL approaches throughout the semester. In an effort to identify the UDL's specific outcomes or benefits to students, this study used a pre- and post- test to identify the treatment's impact on student engagement. Findings indicated that the LMS could be designed to comply with UDL guidelines, and the instructor was able to establish a high level of efficacy in maintaining that UDL design. However, based on the statistical analysis of pre- and post-test responses from control vs. treatment groups of students, the treatment was seen to have no significant effect in the area of student engagement. Overall, the study added to the literature by suggesting (a) the viability of the LMS as a means of providing UDL approaches, (b) the promise of the LMS as a tool faculty can use to deliver UDL with a high level of efficacy, and (c) the design's lack of effect in the area of student engagement. The fact that this study was limited to a single brand of LMS (Blackboard), a single instructor, and a single group of students underscores the need for further research.

Interrater Agreement on the Visual Analysis of Individual Tiers and Functional Relations in Multiple Baseline Designs.

PubMed

Wolfe, Katie; Seaman, Michael A; Drasgow, Erik

2016-11-01

Previous research on visual analysis has reported low levels of interrater agreement. However, many of these studies have methodological limitations (e.g., use of AB designs, undefined judgment task) that may have negatively influenced agreement. Our primary purpose was to evaluate whether agreement would be higher than previously reported if we addressed these weaknesses. Our secondary purposes were to investigate agreement at the tier level (i.e., the AB comparison) and at the functional relation level in multiple baseline designs and to examine the relationship between raters' decisions at each of these levels. We asked experts (N = 52) to make judgments about changes in the dependent variable in individual tiers and about the presence of an overall functional relation in 31 multiple baseline graphs. Our results indicate that interrater agreement was just at or just below minimally adequate levels for both types of decisions and that agreement at the individual tier level often resulted in agreement about the overall functional relation. We report additional findings and discuss implications for practice and future research. © The Author(s) 2016.

Adaptation of object descriptions to a partner under increasing communicative demands: a comparison of children with and without autism.

PubMed

Nadig, Aparna; Vivanti, Giacomo; Ozonoff, Sally

2009-12-01

This study compared the object descriptions of school-age children with high-functioning autism (HFA) with those of a matched group of typically developing children. Descriptions were elicited in a referential communication task where shared information was manipulated, and in a guessing game where clues had to be provided about the identity of an object that was hidden from the addressee. Across these tasks, increasingly complex levels of audience design were assessed: (1) the ability to give adequate descriptions from one's own perspective, (2) the ability to adjust descriptions to an addressee's perspective when this differs from one's own, and (3) the ability to provide indirect yet identifying descriptions in a situation where explicit labeling is inappropriate. Results showed that there were group differences in all three cases, with the HFA group giving less efficient descriptions with respect to the relevant context than the comparison group. More revealing was the identification of distinct adaptation profiles among the HFA participants: those who had difficulty with all three levels, those who displayed Level 1 audience design but poor Level 2 and Level 3 design, and those demonstrated all three levels of audience design, like the majority of the comparison group. Higher structural language ability, rather than symptom severity or social skills, differentiated those HFA participants with typical adaptation profiles from those who displayed deficient audience design, consistent with previous reports of language use in autism.

"A Step Above the Rest..." Specialized Middle Level Preparation.

ERIC Educational Resources Information Center

Giebelhaus, Carmen R.

Teachers who had received a specialized preparation for middle level teaching were studied to determine the effectiveness of such a preparation program and to help form a knowledge base from which teacher education institutions could document, design, and implement middle level preparation programs. The paper reviews the literature investigating…

Trauma systems and the costs of trauma care.

PubMed Central

Goldfarb, M G; Bazzoli, G J; Coffey, R M

1996-01-01

OBJECTIVE. This study examines the cost of providing trauma services in trauma centers organized by publicly administered trauma systems, compared to hospitals not part of a formal trauma system. DATA SOURCES AND STUDY SETTING. Secondary administrative discharge abstracts for a national sample of severely injured trauma patients in 44 trauma centers and 60 matched control hospitals for the year 1987 were used. STUDY DESIGN. Retrospective univariate and multivariate analyses were conducted to examine the impact of formal trauma systems and trauma center designation on the costs of treating trauma patients. Key dependent variables included length of stay, charge per day per patient, and charge per hospital stay. Key impact variables were type of trauma system and level of trauma designation. Control variables included patient, hospital, and community characteristics. DATA COLLECTION/EXTRACTION METHODS. Data were selected for hospitals based on (1) a large national hospital discharge database, the Hospital Cost and Utilization Project, 1980-1987 (HCUP-2) and (2) a special survey of trauma systems and trauma designation undertaken by the Hospital Research and Educational Trust of the American Hospital Association. PRINCIPAL FINDINGS. The results show that publicly designated Level I trauma centers, which are the focal point of most trauma systems, have the highest charge per case, the highest average charge per day, and similar or longer average lengths of stay than other hospitals. These findings persist after controlling for patient injury and health status, and for demographic characteristics and hospital and community characteristics. CONCLUSIONS. Prior research shows that severely injured trauma patients have greater chances of survival when treated in specialized trauma centers. However, findings here should be of concern to the many states developing trauma systems since the high costs of Level I centers support limiting the number of centers designated at this level and/or reconsidering the requirements placed on these centers. PMID:8617611

Probabilistic Methods for Uncertainty Propagation Applied to Aircraft Design

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Lin, Hong-Zong; Khalessi, Mohammad R.

2002-01-01

Three methods of probabilistic uncertainty propagation and quantification (the method of moments, Monte Carlo simulation, and a nongradient simulation search method) are applied to an aircraft analysis and conceptual design program to demonstrate design under uncertainty. The chosen example problems appear to have discontinuous design spaces and thus these examples pose difficulties for many popular methods of uncertainty propagation and quantification. However, specific implementation features of the first and third methods chosen for use in this study enable successful propagation of small uncertainties through the program. Input uncertainties in two configuration design variables are considered. Uncertainties in aircraft weight are computed. The effects of specifying required levels of constraint satisfaction with specified levels of input uncertainty are also demonstrated. The results show, as expected, that the designs under uncertainty are typically heavier and more conservative than those in which no input uncertainties exist.

Space Missions Trade Space Generation and Assessment Using JPL Rapid Mission Architecture (RMA) Team Approach

NASA Technical Reports Server (NTRS)

Moeller, Robert C.; Borden, Chester; Spilker, Thomas; Smythe, William; Lock, Robert

2011-01-01

The JPL Rapid Mission Architecture (RMA) capability is a novel collaborative team-based approach to generate new mission architectures, explore broad trade space options, and conduct architecture-level analyses. RMA studies address feasibility and identify best candidates to proceed to further detailed design studies. Development of RMA first began at JPL in 2007 and has evolved to address the need for rapid, effective early mission architectural development and trade space exploration as a precursor to traditional point design evaluations. The RMA approach integrates a small team of architecture-level experts (typically 6-10 people) to generate and explore a wide-ranging trade space of mission architectures driven by the mission science (or technology) objectives. Group brainstorming and trade space analyses are conducted at a higher level of assessment across multiple mission architectures and systems to enable rapid assessment of a set of diverse, innovative concepts. This paper describes the overall JPL RMA team, process, and high-level approach. Some illustrative results from previous JPL RMA studies are discussed.

Influence of design and clinical factors on the removal force ratio in tapered implant-abutment interfaces.

PubMed

Aguirrebeitia, Josu; Abasolo, Mikel; Müftü, Sinan; Vallejo, Javier

2017-04-01

A previous study investigated the effects of the preload and taper-angle mismatch in tapered implant systems on the removal force characteristics of the self-locking mechanism. The present study builds upon the previous one and introduces the effects of the time elapsed between insertion and removal and the presence of saliva in the implant-abutment interface as 2 new additional parameters. The purpose of this in vitro study was to elucidate the influences of design and clinical parameters on the removal force for implant systems that use tapered interference fit (TIF) type connections by measuring the force needed to remove an abutment from an implant. Ninety-six implants with tapered abutment-implant interfaces specifically built for an unreplicated factorial design were tested on a custom-built workbench for removal force. Four levels were chosen for the preload, F P , and the taper mismatch Δθ; 3 levels for the wait time t; and 2 levels for the saliva presence s at the interface. A regression model was used based on physical reasoning and a theoretical understanding of the interface. A 4-way ANOVA was used to evaluate the influence of the main effects and interactions (α=.05). The experiments strongly indicated that preload, taper mismatch, and saliva presence are relevant variables in removal force. The wait time becomes important when its effect is evaluated along with the preload. The results of this study can be used for decision making in the design and use of TIF type systems. The study supports the use of artificial saliva in any implant design experiment because of its significance in the removal force of the abutment. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Investigation into the impact of agility on conceptual fighter design

NASA Technical Reports Server (NTRS)

Engelbeck, R. M.

1995-01-01

The Agility Design Study was performed by the Boeing Defense and Space Group for the NASA Langley Research Center. The objective of the study was to assess the impact of agility requirements on new fighter configurations. Global trade issues investigated were the level of agility, the mission role of the aircraft (air-to-ground, multi-role, or air-to-air), and whether the customer is Air force, Navy, or joint service. Mission profiles and design objectives were supplied by NASA. An extensive technology assessment was conducted to establish the available technologies to industry for the aircraft. Conceptual level methodology is presented to assess the five NASA-supplied agility metrics. Twelve configurations were developed to address the global trade issues. Three-view drawings, inboard profiles, and performance estimates were made and are included in the report. A critical assessment and lessons learned from the study are also presented.

Economics of ion propulsion for large space systems

NASA Technical Reports Server (NTRS)

Masek, T. D.; Ward, J. W.; Rawlin, V. K.

1978-01-01

This study of advanced electrostatic ion thrusters for space propulsion was initiated to determine the suitability of the baseline 30-cm thruster for future missions and to identify other thruster concepts that would better satisfy mission requirements. The general scope of the study was to review mission requirements, select thruster designs to meet these requirements, assess the associated thruster technology requirements, and recommend short- and long-term technology directions that would support future thruster needs. Preliminary design concepts for several advanced thrusters were developed to assess the potential practical difficulties of a new design. This study produced useful general methodologies for assessing both planetary and earth orbit missions. For planetary missions, the assessment is in terms of payload performance as a function of propulsion system technology level. For earth orbit missions, the assessment is made on the basis of cost (cost sensitivity to propulsion system technology level).

Nonlinear modeling, strength-based design, and testing of flexible piezoelectric energy harvesters under large dynamic loads for rotorcraft applications

NASA Astrophysics Data System (ADS)

Leadenham, Stephen; Erturk, Alper

2014-04-01

There has been growing interest in enabling wireless health and usage monitoring for rotorcraft applications, such as helicopter rotor systems. Large dynamic loads and acceleration fluctuations available in these environments make the implementation of vibration-based piezoelectric energy harvesters a very promising choice. However, such extreme loads transmitted to the harvester can also be detrimental to piezoelectric laminates and overall system reliability. Particularly flexible resonant cantilever configurations tuned to match the dominant excitation frequency can be subject to very large deformations and failure of brittle piezoelectric laminates due to excessive bending stresses at the root of the harvester. Design of resonant piezoelectric energy harvesters for use in these environments require nonlinear electroelastic dynamic modeling and strength-based analysis to maximize the power output while ensuring that the harvester is still functional. This paper presents a mathematical framework to design and analyze the dynamics of nonlinear flexible piezoelectric energy harvesters under large base acceleration levels. A strength-based limit is imposed to design the piezoelectric energy harvester with a proof mass while accounting for material, geometric, and dissipative nonlinearities, with a focus on two demonstrative case studies having the same linear fundamental resonance frequency but different overhang length and proof mass values. Experiments are conducted at different excitation levels for validation of the nonlinear design approach proposed in this work. The case studies in this work reveal that harvesters exhibiting similar behavior and power generation performance at low excitation levels (e.g. less than 0.1g) can have totally different strength-imposed performance limitations under high excitations (e.g. above 1g). Nonlinear modeling and strength-based design is necessary for such excitation levels especially when using resonant cantilevers with no geometric constraint.

Sampling Designs in Qualitative Research: Making the Sampling Process More Public

ERIC Educational Resources Information Center

Onwuegbuzie, Anthony J.; Leech, Nancy L.

2007-01-01

The purpose of this paper is to provide a typology of sampling designs for qualitative researchers. We introduce the following sampling strategies: (a) parallel sampling designs, which represent a body of sampling strategies that facilitate credible comparisons of two or more different subgroups that are extracted from the same levels of study;…

Current Issues in Art and Design Education: Modularization and Course Ethos: The Case of Art and Design Higher Education.

ERIC Educational Resources Information Center

Wayte, Gillian; Wayte, Nick

1990-01-01

Examines why art and design educators resist the modularization of degree-level courses. Identifies key characteristics of art education in England through an ethnographic study. Discusses government policy and rationales for modular and integrated courses. Concludes that the holistic approach to education allows students to expound and develop…

A Computer Environment for Beginners' Learning of Sorting Algorithms: Design and Pilot Evaluation

ERIC Educational Resources Information Center

Kordaki, M.; Miatidis, M.; Kapsampelis, G.

2008-01-01

This paper presents the design, features and pilot evaluation study of a web-based environment--the SORTING environment--for the learning of sorting algorithms by secondary level education students. The design of this environment is based on modeling methodology, taking into account modern constructivist and social theories of learning while at…

Content, Structure, and Sequence of the Detailing Discipline at Kendall College of Art and Design.

ERIC Educational Resources Information Center

Mulder, Bruce E.

A study identified the appropriate general content, structure, and sequence for a detailing discipline that promoted student achievement to professional levels. Its focus was the detailing discipline, a sequence of studio courses within the furniture design program at Kendall College of Art and Design, Grand Rapids, Michigan. (Detailing, an…

Predictors of HIV enacted stigma among Chilean women.

PubMed

Cianelli, Rosina; Villlegas, Natalia; De Oliveira, Giovanna; Hires, Kimberly; Gattamorta, Karina; Ferrer, Lilian; Peragallo, Nilda

2015-09-01

To investigate if socio-demographic factors, religiosity, HIV-related knowledge, Marianismo, history of having been tested for HIV, knowing someone who died of AIDS and HIV risk perception were predictive factors to HIV enacted stigma predictors among Chilean women. HIV infection is the number one cause of death among women during their reproductive years. In Chile, studies with people living with HIV demonstrate the existence of HIV-related stigma. However, limited evidence is available about the underlying causes of HIV enacted stigma that results in stigmatisation and discrimination. The current cross-sectional study is a secondary analysis of data collected to assess the impact of an HIV prevention intervention (Mano a Mano-Mujer) designed for Chilean women. A quasi-experimental design was used in the original study. This study was conducted in two communities in Santiago, Chile. The sample for this study consisted of 496 Chileans between ages 18-49. Descriptive statistics and multiple regression were used for the analysis. Participants in the study reported high levels (77·8%) of HIV enacted stigma. Higher levels of HIV-related knowledge were associated with lower levels of HIV enacted stigma. Women with higher education had lower levels of HIV enacted stigma than women with elementary education. In addition, greater levels of marianismo (cultural belief that women should be passive, faithful, and devoted to family) were associated with higher HIV enacted stigma scores. The findings reflected the presence of HIV enacted stigma among Chilean women. Identifying the significant predictors of HIV enacted stigma can help the nursing community to design HIV prevention interventions that include the reduction in HIV enacted stigma. HIV evidence-based prevention interventions should incorporate contents related to stigma to contribute to prevent HIV enacted stigma at individual and community levels in accordance with the bioecological model. The results of this study could serve to develop HIV prevention interventions that target the reduction in HIV enacted stigma. © 2015 John Wiley & Sons Ltd.

Workplace physical activity interventions: a systematic review.

PubMed

To, Quyen G; Chen, Ted T L; Magnussen, Costan G; To, Kien G

2013-01-01

To assess the effectiveness of workplace interventions in improving physical activity. EBSCO research database (and all subdatabases). Articles were published from 2000 to 2010 in English, had appropriate designs, and measured employees' physical activity, energy consumption, and/or body mass index (BMI) as primary outcomes. Articles that did not meet the inclusion criteria were excluded. Data extracted included study design, study population, duration, intervention activities, outcomes, and results. Data were synthesized into one table. Results of each relevant outcome including p values were combined. Twelve (60%) of 20 selected interventions reported an improvement in physical activity level, steps, or BMI, and there was one slowed step reduction in the intervention group. Among these, 10 were less than 6 months in duration; 9 used pedometers; 6 applied Internet-based approaches; and 5 included activities targeting social and environmental levels. Seven of 8 interventions with pre-posttest and quasi-experimental controlled design showed improvement on at least one outcome. However, 7 of 12 randomized controlled trials (RCTs) did not prove effective in any outcome. Interventions that had less rigorous research designs, used pedometers, applied Internet-based approaches, and included activities at social and environmental levels were more likely to report being effective than those without these characteristics.

Bias magnification in ecologic studies: a methodological investigation

PubMed Central

Webster, Thomas F

2007-01-01

Background As ecologic studies are often inexpensive to conduct, consideration of the magnitude and direction of ecologic biases may be useful in both study design and sensitivity analysis of results. This paper examines three types of ecologic bias: confounding by group, effect measure modification by group, and non-differential exposure misclassification. Methods Bias of the risk difference on the individual and ecologic levels are compared using two-by-two tables, simple equations, and risk diagrams. Risk diagrams provide a convenient way to simultaneously display information from both levels. Results Confounding by group and effect measure modification by group act in the same direction on the individual and group levels, but have larger impact on the latter. The reduction in exposure variance caused by aggregation magnifies the individual level bias due to ignoring groups. For some studies, the magnification factor can be calculated from the ecologic data alone. Small magnification factors indicate little bias beyond that occurring at the individual level. Aggregation is also responsible for the different impacts of non-differential exposure misclassification on individual and ecologic studies. Conclusion The analytical tools developed here are useful in analyzing ecologic bias. The concept of bias magnification may be helpful in designing ecologic studies and performing sensitivity analysis of their results. PMID:17615079

A preliminary design study on an acoustic muffler for the laminar flow transition research apparatus

NASA Technical Reports Server (NTRS)

Abrahamson, A. L.

1984-01-01

An acoustic muffler design of a research tool for studying laminar flow and the mechanisms of transition, the Laminar Flow and Transition Research Apparatus (LFTRA) is investigated. Since the presence of acoustic pressure fluctuations is known to affect transition, low background noise levels in the test section of the LFTRA are mandatory. The difficulties and tradeoffs of various muffler design concepts are discussed and the most promising candidates are emphasized.

Asphaltic concrete overlays of rigid and flexible pavements : interim report No. 1.

DOT National Transportation Integrated Search

1977-09-01

This study evaluated the effect of a given thickness of asphaltic concrete overlay in rehabilitating 53 test sections conforming to the experiment design. This factorial design specified various levels of traffic intensity and overlay thickness for b...

Lunar surface transportation systems conceptual design lunar base systems study Task 5.2

NASA Technical Reports Server (NTRS)

1988-01-01

Conceptual designs for three categories of lunar surface transportation were described. The level of understanding for the capabilities and design approach varies between the vehicles representing these categories. A summary of the vehicle categories and current state of conceptual design is provided. Finally, a brief evaluation and discussion is provided for a systematic comparison of transportation categories and effectiveness in supporting transportation objectives.

Procedure and information displays in advanced nuclear control rooms: experimental evaluation of an integrated design.

PubMed

Chen, Yue; Gao, Qin; Song, Fei; Li, Zhizhong; Wang, Yufan

2017-08-01

In the main control rooms of nuclear power plants, operators frequently have to switch between procedure displays and system information displays. In this study, we proposed an operation-unit-based integrated design, which combines the two displays to facilitate the synthesis of information. We grouped actions that complete a single goal into operation units and showed these operation units on the displays of system states. In addition, we used different levels of visual salience to highlight the current unit and provided a list of execution history records. A laboratory experiment, with 42 students performing a simulated procedure to deal with unexpected high pressuriser level, was conducted to compare this design against an action-based integrated design and the existing separated-displays design. The results indicate that our operation-unit-based integrated design yields the best performance in terms of time and completion rate and helped more participants to detect unexpected system failures. Practitioner Summary: In current nuclear control rooms, operators frequently have to switch between procedure and system information displays. We developed an integrated design that incorporates procedure information into system displays. A laboratory study showed that the proposed design significantly improved participants' performance and increased the probability of detecting unexpected system failures.

High School Students' Written Argumentation Qualities with Problem-Based Computer-Aided Material (PBCAM) Designed about Human Endocrine System

ERIC Educational Resources Information Center

Vekli, Gülsah Sezen; Çimer, Atilla

2017-01-01

This study investigated development of students' scientific argumentation levels in the applications made with Problem-Based Computer-Aided Material (PBCAM) designed about Human Endocrine System. The case study method was used: The study group was formed of 43 students in the 11th grade of the science high school in Rize. Human Endocrine System…

Empirical Assessment of Effect of Publication Bias on a Meta-Analysis of Validity Studies on University Matriculation Examinations in Nigeria

ERIC Educational Resources Information Center

Adeyemo, Emily Oluseyi

2012-01-01

This study examined the impact of publication bias on a meta-analysis of empirical studies on validity of University Matriculation Examinations in Nigeria with a view to determine the level of difference between published and unpublished articles. Specifically, the design was an ex-post facto, a causal comparative design. The sample size consisted…

Critical Factors Affecting Students' Satisfaction with Higher Education in Sri Lanka

ERIC Educational Resources Information Center

Weerasinghe, I. M. S.; Fernando, R. L. S.

2018-01-01

Purpose: The purpose of this study is to explain critical factors affecting student satisfaction levels in selected state universities in Sri Lanka. Design/methodology/approach: The study has applied an quantitative survey design guided by six hypotheses. A conceptual framework has been developed to address the research questions on the basis of a…

Applying Item Response Theory Methods to Design a Learning Progression-Based Science Assessment

ERIC Educational Resources Information Center

Chen, Jing

2012-01-01

Learning progressions are used to describe how students' understanding of a topic progresses over time and to classify the progress of students into steps or levels. This study applies Item Response Theory (IRT) based methods to investigate how to design learning progression-based science assessments. The research questions of this study are: (1)…

Africa: A Social Studies and Science Curriculum.

ERIC Educational Resources Information Center

Holboke, Kathy; And Others

This packet was designed to help teachers maximize a visit to a zoo's Africa exhibit. The packet provides two levels of activities, grades 3-5, and grades 6-8, for use before, during and after the visit. Activities are designed to enhance skills taught in science, social studies, language arts, reading, art, and math. A multi-grade background…

Reflective Course Design: An Interplay between Pedagogy and Technology in a Language Teacher Education Course

ERIC Educational Resources Information Center

Firdyiwek, Yitna; Scida, Emily E.

2014-01-01

This study reports on a sequence of iterative redesigns of a graduate-level foreign language teacher education course. The study describes the interplay between technology and pedagogy that resulted in important curricular changes, from a focus on individual to social and then holistic reflection. Using a team-based design model, instructional…

An Investigation of the Effects of Relevant Samples and a Comparison of Verification versus Discovery Based Lab Design

ERIC Educational Resources Information Center

Rieben, James C., Jr.

2010-01-01

This study focuses on the effects of relevance and lab design on student learning within the chemistry laboratory environment. A general chemistry conductivity of solutions experiment and an upper level organic chemistry cellulose regeneration experiment were employed. In the conductivity experiment, the two main variables studied were the effect…

Nursing Home Quality, Cost, Staffing, and Staff Mix

ERIC Educational Resources Information Center

Rantz, Marilyn J.; Hicks, Lanis; Grando, Victoria; Petroski, Gregory F.; Madsen, Richard W.; Mehr, David R.; Conn, Vicki; Zwygart-Staffacher, Mary; Scott, Jill; Flesner, Marcia; Bostick, Jane; Porter, Rose; Maas, Meridean

2004-01-01

Purpose: The purpose of this study was to describe the processes of care, organizational attributes, cost of care, staffing level, and staff mix in a sample of Missouri homes with good, average, and poor resident outcomes. Design and Methods: A three-group exploratory study design was used, with 92 nursing homes randomly selected from all nursing…

Successes and Failures Teaching Visual Ethics: A Class Study

ERIC Educational Resources Information Center

Roundtree, Aimee Kendall

2010-01-01

This article discusses and evaluates the inclusion of ethics learning modules in a graduate- level visual design theory course. Modules were designed as a part of an NEH grant. Students grappled with case studies that probed the ethics of visuals at the crux of the BP oil refinery accident, NASA space shuttle disasters, the Enron collapse, and…

Students' Satisfaction with Service Delivery in Federal Universities in South-South Geo-Political Zone, Nigeria

ERIC Educational Resources Information Center

Akpoiroro, Roseline M.; Okon, James E.

2015-01-01

The study was designed to investigate the level of students' satisfaction with service delivery in federal universities in South-south geopolitical zone of Nigeria in terms of educational, library, security, medical, transport, hostel, and ICT services. Survey design was used to carry out the study, the hypothesis was formulated and literature…

The Impact of Critical Thinking and Logico-Mathematical Intelligence on Algorithmic Design Skills

ERIC Educational Resources Information Center

Korkmaz, Ozgen

2012-01-01

The present study aims to reveal the impact of students' critical thinking and logico-mathematical intelligence levels of students on their algorithm design skills. This research was a descriptive study and carried out by survey methods. The sample consisted of 45 first-year educational faculty undergraduate students. The data was collected by…

Perception of Teachers and Administrators on the Teaching Methods That Influence the Acquisition of Generic Skills

ERIC Educational Resources Information Center

Audu, R.; Bin Kamin, Yusri; Bin Musta'amal, Aede Hatib; Bin Saud, Muhammad Sukri; Hamid, Mohd. Zolkifli Abd.

2014-01-01

This study is designed to identify the most significant teaching methods that influence the acquisition of generic skills of mechanical engineering trades students at technical college level. Descriptive survey research design was utilized in carrying out the study. One hundred and ninety (190) respondents comprised of mechanical engineering…

As Green as We Think? The Case of the College of Charleston Green Building Initiative

ERIC Educational Resources Information Center

Owens, Katharine A.; Halfacre-Hitchcock, Angela

2006-01-01

Purpose: This paper seeks to disseminate knowledge regarding the experiences of a student team in implementing a campus-level sustainability initiative, outlining the strategy to measure the potential impact of this initiative. Design/methodology/approach: Project design is a case study. Via interviewing and surveys, the study observed student and…

The Impact of Learner's Prior Knowledge on Their Use of Chemistry Computer Simulations: A Case Study

ERIC Educational Resources Information Center

Liu, Han-Chin; Andre, Thomas; Greenbowe, Thomas

2008-01-01

It is complicated to design a computer simulation that adapts to students with different characteristics. This study documented cases that show how college students' prior chemistry knowledge level affected their interaction with peers and their approach to solving problems with the use of computer simulations that were designed to learn…

Supporting More Inclusive Learning with Social Networking: A Case Study of Blended Socialised Design Education

ERIC Educational Resources Information Center

Rodrigo, Russell; Nguyen, Tam

2013-01-01

This paper presents a qualitative case study of socialised blended learning, using a social network platform to investigate the level of literacies and interactions of students in a blended learning environment of traditional face-to-face design studio and online participatory teaching. Using student and staff feedback, the paper examines the use…

Design for interaction between humans and intelligent systems during real-time fault management

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.; Thronesbery, Carroll G.

1992-01-01

Initial results are reported to provide guidance and assistance for designers of intelligent systems and their human interfaces. The objective is to achieve more effective human-computer interaction (HCI) for real time fault management support systems. Studies of the development of intelligent fault management systems within NASA have resulted in a new perspective of the user. If the user is viewed as one of the subsystems in a heterogeneous, distributed system, system design becomes the design of a flexible architecture for accomplishing system tasks with both human and computer agents. HCI requirements and design should be distinguished from user interface (displays and controls) requirements and design. Effective HCI design for multi-agent systems requires explicit identification of activities and information that support coordination and communication between agents. The effects are characterized of HCI design on overall system design and approaches are identified to addressing HCI requirements in system design. The results include definition of (1) guidance based on information level requirements analysis of HCI, (2) high level requirements for a design methodology that integrates the HCI perspective into system design, and (3) requirements for embedding HCI design tools into intelligent system development environments.

Design and development of microbioreactors for long-term cell culture in controlled oxygen microenvironments.

PubMed

Abaci, Hasan E; Devendra, Raghavendra; Smith, Quinton; Gerecht, Sharon; Drazer, German

2012-02-01

The ability to control the oxygen level to which cells are exposed in tissue culture experiments is crucial for many applications. Here, we design, develop and test a microbioreactor (MBR) for long-term cell culture studies with the capability to accurately control and continuously monitor the dissolved oxygen (DO) level in the cell microenvironment. In addition, the DO level can be controlled independently from other cues, such as the viscous shear-stress acting on the cells. We first analyze the transport of oxygen in the proposed device and determine the materials and dimensions that are compatible with uniform oxygen tension and low shear-stress at the cell level. The device is also designed to culture a statistically significant number of cells. We use fully transparent materials and the overall design of the device is compatible with live-cell imaging. The proposed system includes real-time read-out of actual DO levels, is simple to fabricate at low cost, and can be easily expanded to control the concentration of other microenvironmental solutes. We performed control experiments in the absence of cells to demonstrate that the MBR can be used to accurately modulate DO levels ranging from atmospheric level to 1%, both under no flow and perfusion conditions. We also demonstrate cancer cell attachment and viability within the MBR. The proposed MBR offers the unprecedented capability to perform on-line measurement and analysis of DO levels in the microenvironment of adherent cultures and to correlate them with various cellular responses.

A systematic review of the use of an expertise-based randomised controlled trial design.

PubMed

Cook, Jonathan A; Elders, Andrew; Boachie, Charles; Bassinga, Ted; Fraser, Cynthia; Altman, Doug G; Boutron, Isabelle; Ramsay, Craig R; MacLennan, Graeme S

2015-05-30

Under a conventional two-arm randomised trial design, participants are allocated to an intervention and participating health professionals are expected to deliver both interventions. However, health professionals often have differing levels of expertise in a skill-based interventions such as surgery or psychotherapy. An expertise-based approach to trial design, where health professionals only deliver an intervention in which they have expertise, has been proposed as an alternative. The aim of this project was to systematically review the use of an expertise-based trial design in the medical literature. We carried out a comprehensive search of nine databases--AMED, BIOSIS, CENTRAL, CINAHL, Cochrane Methodology Register, EMBASE, MEDLINE, Science Citation Index, and PsycINFO--from 1966 to 2012 and performed citation searches using the ISI Citation Indexes and Scopus. Studies that used an expertise-based trial design were included. Two review authors independently screened the titles and abstracts and assessed full-text reports. Data were extracted and summarised on the study characteristics, general and expertise-specific study methodology, and conduct. In total, 7476 titles and abstracts were identified, leading to 43 included studies (54 articles). The vast majority (88%) used a pure expertise-based design; three (7%) adopted a hybrid design, and two (5%) used a design that was unclear. Most studies compared substantially different interventions (79%). In many cases, key information relating to the expertise-based design was absent; only 12 (28%) reported criteria for delivering both interventions. Most studies recruited the target sample size or very close to it (median of 101, interquartile range of 94 to 118), although the target was reported for only 40% of studies. The proportion of participants who received the allocated intervention was high (92%, interquartile range of 82 to 99%). While use of an expertise-based trial design is growing, it remains uncommon. Reporting of study methodology and, particularly, expertise-related methodology was poor. Empirical evidence provided some support for purported benefits such as high levels of recruitment and compliance with allocation. An expertise-based trial design should be considered but its value seems context-specific, particularly when interventions differ substantially or interventions are typically delivered by different health professionals.

The Impact of Environmental Design on Teamwork and Communication in Healthcare Facilities: A Systematic Literature Review.

PubMed

Gharaveis, Arsalan; Hamilton, D Kirk; Pati, Debajyoti

2018-01-01

The purpose of this systematic review is to investigate the current knowledge about the impact of healthcare facility design on teamwork and communication by exploring the relevant literature. Teamwork and communication are behavioral factors that are impacted by physical design. However, the effects of environmental factors on teamwork and communication have not been investigated extensively in healthcare design literature. There are no published systematic reviews on the current topic. Searches were conducted in PubMed and Google Scholar databases in addition to targeted design journals including Health Environmental Research & Design, Environment and Behavior, Environmental Psychology, and Applied Ergonomics. Inclusion criteria were (a) full-text English language articles related to teamwork and communication and (b) involving any healthcare built environment and space design published in peer-reviewed journals between 1984 and 2017. Studies were extracted using defined inclusion and exclusion criteria. In the first phase, 26 of the 195 articles most relevant to teamwork and 19 studies of the 147 were identified and reviewed to understand the impact of communication in healthcare facilities. The literature regarding the impact of built environment on teamwork and communication were reviewed and explored in detail. Eighteen studies were selected and succinctly summarized as the final product of this review. Environmental design, which involves nurses, support staff, and physicians, is one of the critical factors that promotes the efficiency of teamwork and collaborative communication. Layout design, visibility, and accessibility levels are the most cited aspects of design which can affect the level of communication and teamwork in healthcare facilities.

Abuse of disabled parking: Reforming public's attitude through persuasive multimedia strategy

NASA Astrophysics Data System (ADS)

Yahaya, W. A. J. W.; Zain, M. Z. M.

2014-02-01

Attitude is one of the factors that contribute to the abuse of disabled parking. The attitude's components are affective, cognitive and behavioral and may be formed in various ways including learning and persuasion. Using learning and persuasion approach, this study has produced a persuasive multimedia aiming to form a positive attitude toward disabled persons in order to minimize the rate of disabled parking abuse. The persuasive multimedia was developed using Principle of Social Learning draws from Persuasive Technology as learning strategy at macro persuasion level, and modality and redundancy principles draw from Multimedia Learning Principles as design strategy at micro persuasion level. In order to measure the effectiveness of the persuasive multimedia, 93 respondents were selected in a 2 × 2 quasi experimental research design for experiment. Attitude components of affective, cognitive and behavioral were measured using adapted instrument from the Multi Dimensional Attitudes Scale toward Persons With Disabilities (MAS). Result of the study shows that the persuasive multimedia which designed based on Social Learning Theory at macro persuasion level is capable of forming positive attitude toward disabled person. The cognitive component of the attitude found to be the most responsive component. In term of design strategy at the micro persuasion level, modality found to be the most significant strategy compare to redundancy. While males are more responsive to the persuasive multimedia compare to females.

Bayesian Chance-Constrained Hydraulic Barrier Design under Geological Structure Uncertainty.

PubMed

Chitsazan, Nima; Pham, Hai V; Tsai, Frank T-C

2015-01-01

The groundwater community has widely recognized geological structure uncertainty as a major source of model structure uncertainty. Previous studies in aquifer remediation design, however, rarely discuss the impact of geological structure uncertainty. This study combines chance-constrained (CC) programming with Bayesian model averaging (BMA) as a BMA-CC framework to assess the impact of geological structure uncertainty in remediation design. To pursue this goal, the BMA-CC method is compared with traditional CC programming that only considers model parameter uncertainty. The BMA-CC method is employed to design a hydraulic barrier to protect public supply wells of the Government St. pump station from salt water intrusion in the "1500-foot" sand and the "1700-foot" sand of the Baton Rouge area, southeastern Louisiana. To address geological structure uncertainty, three groundwater models based on three different hydrostratigraphic architectures are developed. The results show that using traditional CC programming overestimates design reliability. The results also show that at least five additional connector wells are needed to achieve more than 90% design reliability level. The total amount of injected water from the connector wells is higher than the total pumpage of the protected public supply wells. While reducing the injection rate can be achieved by reducing the reliability level, the study finds that the hydraulic barrier design to protect the Government St. pump station may not be economically attractive. © 2014, National Ground Water Association.

Negligible effects of severe organic matter removal and soil compaction on loblolly pine growth over 10 years

Treesearch

Felipe G. Sanchez; D. Andrew Scott; Kim H. Ludovici

2006-01-01

The long-term soil productivity (LTSP) study was initiated to examine the effect of soil porosity and organic matter (OM) levels on net primary productivity (NPP). The study design calls for three levels of OM removal (bole, whole tree and whole tree plus forest floor) and three levels of compaction (none, moderate and severe) being imposed on harvested sites prior to...

Design Steps for Physic STEM Education Learning in Secondary School

NASA Astrophysics Data System (ADS)

Teevasuthonsakul, C.; Yuvanatheeme, V.; Sriput, V.; Suwandecha, S.

2017-09-01

This study aimed to develop the process of STEM Education activity design used in Physics subjects in the Thai secondary schools. The researchers have conducted the study by reviewing the literature and related works, interviewing Physics experts, designing and revising the process accordingly, and experimenting the designed process in actual classrooms. This brought about the five-step process of STEM Education activity design which Physics teachers applied to their actual teaching context. The results from the after-class evaluation revealed that the students’ satisfaction level toward Physics subject and critical thinking skill was found higher statistically significant at p < .05. Moreover, teachers were advised to integrate the principles of science, mathematics, technology, and engineering design process as the foundation when creating case study of problems and solutions.

How Parents Were Involved in a Special School in Hong Kong

ERIC Educational Resources Information Center

Ng, Shun Wing; Lee, Tai Hoi Theodore

2015-01-01

Purpose: The purpose of this paper is to report on a case study of 93 parents' attitude toward their involvement at various levels of school education in a special school. It also examines the relations between parents' education backgrounds and different levels of parental involvement. Design/methodology/approach: This study adopted quantitative…

Factors Influencing Teachers' Technology Self-Efficacy: A Case Study

ERIC Educational Resources Information Center

Farah, Amy Caroline

2012-01-01

Factors influencing teachers' levels of technology self-efficacy were examined through a qualitative multi-site, multi-subject case study research design. An initial survey was administered to all full-time, certified teachers at three school sites in order to gauge teachers' current level of technology self-efficacy. From that…

A Graduate-Level Survey of Futures Studies: A Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Miller, David C.; Hunt, Ronald L.

An introductory graduate level course curriculum for Futures Studies was conceived, designed, and tested within the Cybernetic Systems Program and the Instructional Technology Department, School of Education, California State University, San Jose. The curriculum consists of a series of 15 learning modules including 2 devoted to a standard study…

An Explorative Study on Environmental Literacy among the Secondary Level Students in Bangladesh

ERIC Educational Resources Information Center

Sarkar, Md. Mahbub Alam; Ara, Quazi Afroz Jahan; Raihan, Jahir; Ozaki, Koji

2008-01-01

This study was intended to explore the environmental literacy among the secondary level students of Bangladesh. Specifically, it was designed to: i) determine environmental knowledge of the secondary students, ii) explore their environmental attitude, iii) find out their environment related practices, and iv) explore school's environment-friendly…

How to Motivate Students to Study before They Enter the Lab

ERIC Educational Resources Information Center

Pogacnik, Lea; Cigic, Blaz

2006-01-01

Laboratory exercises constitute an important part of chemical and biochemical courses at the university level. Nevertheless, students frequently are insufficiently prepared for the practical work, which often reduces their work to the level of a technician. A system designed to motivate students to study prior to the laboratory exercise was…

Organizational Communication: Perceptions of Staff Members' Level of Communication Satisfaction and Job Satisfaction

ERIC Educational Resources Information Center

Sharma, Priti; Lampley, James; Good, Donald

2015-01-01

The purpose of this research study was to explore the topic of organizational communication in higher education and examine staff members' perceptions about their level of communication and job satisfaction in their workplaces. This study was also designed to test the relationship between communication satisfaction and job satisfaction by…

Strategic enhancement of Desertifilum tharense MSAK01 on dairy wastewater: an integrated approach for remediation and biomass production

NASA Astrophysics Data System (ADS)

Khemka, Ankita; Saraf, Meenu

2017-10-01

The present study is an integrated approach to study the potential of Desertifilum tharense MSAK01 for treatment of dairy wastewater (DWW) and enrichment of biomass. The present research includes the experiment designed for treatment of DWW. The physical and chemical parameters of wastewater quality, such as nitrate, phosphate, chloride, sulphur, and hardness, were studied. The level of nitrate and phosphate in water bodies was reduced by 94 and 98% in the effluent, respectively. The level of BOD and COD, measure of organic contaminants, were reduced to 70% (BOD5, initial level of 1840 mg O2 L-1) and 56% (COD, initial level of 2470 mg O2 L-1). The second module of the experiment was designed for biochemical extractions by harvesting the biomass (algal strain) grown in DWW. The result of this study shows that algal strain D. tharense is not only an agent for mitigation of pollutant load, but it can also be used as potential source for lipid, protein and carbohydrate.

Assessing Learners' Satisfication towards Support Services Delivery in National Open University Nigeria: Implications for Counselling Services

ERIC Educational Resources Information Center

Okopi, Fidel; Ofole, Ndidi

2013-01-01

This study aims at determining the level of students' satisfaction of learner support services in the study centres of NOUN--National Open University of Nigeria and whether the support services offered at the study centres have significant influence on the level of students' satisfaction. A descriptive survey of ex-post facto research design was…

An Analysis of Teacher Candidates' Usage Level of Metacognitive Learning Strategies: Sample of a University in Turkey

ERIC Educational Resources Information Center

Yesilyurt, Etem

2013-01-01

The purpose of this research is to evaluate the level metacognitive learning strategies are used by teacher candidates. The study was designed as a descriptive research. Study group of present research consists of 291 teacher candidates studying in the Faculty of Education within the body of a Western Anatolian university in Turkey. Research…

An Experimental Study for Effectiveness of Super-Learning Technique at Elementary Level in Pakistan

ERIC Educational Resources Information Center

Shafqat, Hussain; Muhammad, Sarwar; Imran, Yousaf; Naemullah; Inamullah

2010-01-01

The objective of the study was to experience the effectiveness of super-learning technique of teaching at elementary level. The study was conducted with 8th grade students at a public sector school. Pre-test and post-test control group designs were used. Experimental and control groups were formed randomly, the experimental group (N = 62),…

"Let's Talk about Drugs": Pilot Study of a Community-Level Drug Prevention Intervention Based on Motivational Interviewing Principles

ERIC Educational Resources Information Center

Newbery, Natasha; McCambridge, Jim; Strang, John

2007-01-01

Purpose: The feasibility of a community-level drug prevention intervention based upon the principles of motivational interviewing within a further education college was investigated in a pilot study. Design/methodology/approach: The implementation over the course of a single term of "Let's Talk about Drugs" was studied with both action…

Multiobjective hyper heuristic scheme for system design and optimization

NASA Astrophysics Data System (ADS)

Rafique, Amer Farhan

2012-11-01

As system design is becoming more and more multifaceted, integrated, and complex, the traditional single objective optimization trends of optimal design are becoming less and less efficient and effective. Single objective optimization methods present a unique optimal solution whereas multiobjective methods present pareto front. The foremost intent is to predict a reasonable distributed pareto-optimal solution set independent of the problem instance through multiobjective scheme. Other objective of application of intended approach is to improve the worthiness of outputs of the complex engineering system design process at the conceptual design phase. The process is automated in order to provide the system designer with the leverage of the possibility of studying and analyzing a large multiple of possible solutions in a short time. This article presents Multiobjective Hyper Heuristic Optimization Scheme based on low level meta-heuristics developed for the application in engineering system design. Herein, we present a stochastic function to manage meta-heuristics (low-level) to augment surety of global optimum solution. Generic Algorithm, Simulated Annealing and Swarm Intelligence are used as low-level meta-heuristics in this study. Performance of the proposed scheme is investigated through a comprehensive empirical analysis yielding acceptable results. One of the primary motives for performing multiobjective optimization is that the current engineering systems require simultaneous optimization of conflicting and multiple. Random decision making makes the implementation of this scheme attractive and easy. Injecting feasible solutions significantly alters the search direction and also adds diversity of population resulting in accomplishment of pre-defined goals set in the proposed scheme.

An Application of Fractional Factorial Designs to Study Drug Combinations

PubMed Central

Jaynes, Jessica; Ding, Xianting; Xu, Hongquan; Wong, Weng Kee; Ho, Chih-Ming

2013-01-01

Herpes simplex virus type 1 (HSV-1) is known to cause diseases of various severities. There is increasing interest to find drug combinations to treat HSV-1 by reducing drug resistance and cytotoxicity. Drug combinations offer potentially higher efficacy and lower individual drug dosage. In this paper, we report a new application of fractional factorial designs to investigate a biological system with HSV-1 and six antiviral drugs, namely, Interferon-alpha, Interferon-beta, Interferon-gamma, Ribavirin, Acyclovir, and TNF-alpha. We show how the sequential use of two- and three-level fractional factorial designs can screen for important drugs and drug interactions, as well as determine potential optimal drug dosages through the use of contour plots. Our initial experiment using a two-level fractional factorial design suggests that there is model inadequacy and drug dosages should be reduced. A follow-up experiment using a blocked three-level fractional factorial design indicates that TNF-alpha has little effect and HSV-1 infection can be suppressed effectively by using a right combination of the other five antiviral drugs. These observations have practical implications in the understanding of antiviral drug mechanism that can result in better design of antiviral drug therapy. PMID:22859316

Asking the Right Questions: Developing Thinking Skills through Wisconsin's Grade Level Foundations

ERIC Educational Resources Information Center

Ratway, Beth

2008-01-01

In an attempt to deal with the problem of generating the thinking skills needed for the 21st century, this article discusses how a statewide of 30 teachers developed Grade Level Foundations. The core component of the Grade Level Foundations for Social Studies consists of a set of questions that are designed to stimulate higher level thinking about…

A Study of 4-level DC-DC Boost Inverter with Passive Component Reduction Consideration

NASA Astrophysics Data System (ADS)

Kasiran, A. N.; Ponniran, A.; Harimon, M. A.; Hamzah, H. H.

2018-04-01

This study is to analyze design principles of boost inductor and capacitor used in the 4-level DC-DC boost converter to realize size reduction of passive component referring to their attributes. The important feature of this circuit is that most of the boost-up energy is transferred from the capacitor-clamped to the output side which the small inductance can be used at the input side. The inductance of the boost inductor is designed by referring the inductor current ripple. On the other hand, the capacitance of the capacitor-clamped is designed by considering voltage stress on semiconductor devices and also the used switching frequency. Besides that, according to the design specifications, the required inductance in 4-level DC-DC boost converter is decreased compared to a conventional conventional DC-DC boost converter. Meanwhile, voltage stress on semiconductor device is depending on the maximum voltage ripple of the capacitor-clamped. A 50 W 4-level DC-DC boost converter prototype has been constructed. The results show that the inductor current ripple was 1.15 A when the inductors, 1 mH and 0.11 mH were used in the conventional and 4-level DC-DC boost converters, respectively. Thus, based on the experimental results, it shows that the reduction of passive components by referring to their attributes in 4-level DC-DC boost converter is achieved. Moreover, the decreasing of voltage stress on the semiconductor devices is an advantage for the selection of low ON-resistance of the devices which will contribute to the reduction of the semiconductor conduction loss. The integration result of boost converter and H-bridge inverter is also shown.

DESIGN STREAM FLOWS BASED ON HARMONIC MEANS.

EPA Science Inventory

Design streamflows are frequently used in water quality studies to provide adequate protection against pollutant exposure periods of a given duration. By analyzing the effect that simple streamflow dilution has on x-day average exposure levels of a pollutant, it appears that the ...

Simplified spacecraft vulnerability assessments at component level in early design phase at the European Space Agency's Concurrent Design Facility

NASA Astrophysics Data System (ADS)

Kempf, Scott; Schäfer, Frank K.; Cardone, Tiziana; Ferreira, Ivo; Gerené, Sam; Destefanis, Roberto; Grassi, Lilith

2016-12-01

During recent years, the state-of-the-art risk assessment of the threat posed to spacecraft by micrometeoroids and space debris has been expanded to the analysis of failure modes of internal spacecraft components. This method can now be used to perform risk analyses for satellites to assess various failure levels - from failure of specific sub-systems to catastrophic break-up. This new assessment methodology is based on triple-wall ballistic limit equations (BLEs), specifically the Schäfer-Ryan-Lambert (SRL) BLE, which is applicable for describing failure threshold levels for satellite components following a hypervelocity impact. The methodology is implemented in the form of the software tool Particle Impact Risk and vulnerability Analysis Tool (PIRAT). During a recent European Space Agency (ESA) funded study, the PIRAT functionality was expanded in order to provide an interface to ESA's Concurrent Design Facility (CDF). The additions include a geometry importer and an OCDT (Open Concurrent Design Tool) interface. The new interface provides both the expanded geometrical flexibility, which is provided by external computer aided design (CAD) modelling, and an ease of import of existing data without the need for extensive preparation of the model. The reduced effort required to perform vulnerability analyses makes it feasible for application during early design phase, at which point modifications to satellite design can be undertaken with relatively little extra effort. The integration of PIRAT in the CDF represents the first time that vulnerability analyses can be performed in-session in ESA's CDF and the first time that comprehensive vulnerability studies can be applied cost-effectively in early design phase in general.

Methodology for conceptual remote sensing spacecraft technology: insertion analysis balancing performance, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David A.; Duclos, Donald P.; Barrera, Mark J.; Mosher, Todd J.; Lao, Norman Y.

1997-12-01

Emerging technologies and micro-instrumentation are changing the way remote sensing spacecraft missions are developed and implemented. Government agencies responsible for procuring space systems are increasingly requesting analyses to estimate cost, performance and design impacts of advanced technology insertion for both state-of-the-art systems as well as systems to be built 5 to 10 years in the future. Numerous spacecraft technology development programs are being sponsored by Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) agencies with the goal of enhancing spacecraft performance, reducing mass, and reducing cost. However, it is often the case that technology studies, in the interest of maximizing subsystem-level performance and/or mass reduction, do not anticipate synergistic system-level effects. Furthermore, even though technical risks are often identified as one of the largest cost drivers for space systems, many cost/design processes and models ignore effects of cost risk in the interest of quick estimates. To address these issues, the Aerospace Corporation developed a concept analysis methodology and associated software tools. These tools, collectively referred to as the concept analysis and design evaluation toolkit (CADET), facilitate system architecture studies and space system conceptual designs focusing on design heritage, technology selection, and associated effects on cost, risk and performance at the system and subsystem level. CADET allows: (1) quick response to technical design and cost questions; (2) assessment of the cost and performance impacts of existing and new designs/technologies; and (3) estimation of cost uncertainties and risks. These capabilities aid mission designers in determining the configuration of remote sensing missions that meet essential requirements in a cost- effective manner. This paper discuses the development of CADET modules and their application to several remote sensing satellite mission concepts.

Teaching Games Level Design Using the StarCraft II Editor

ERIC Educational Resources Information Center

Sweetser, Penelope

2013-01-01

Level design is often characterised as "where the rubber hits the road" in game development. It is a core area of games design, alongside design of game rules and narrative. However, there is a lack of literature dedicated to documenting teaching games design, let alone the more specialised topic of level design. Furthermore, there…

Obesity and the community food environment: a systematic review.

PubMed

Holsten, Joanna E

2009-03-01

To examine the relationship between obesity and the community and/or consumer food environment. A comprehensive literature search of multiple databases was conducted and seven studies were identified for review. Studies were selected if they measured BMI and environmental variables related to food outlets. Environmental variables included the geographic arrangement of food stores or restaurants in communities and consumer conditions such as food price and availability within each outlet. The study designs, methods, limitations and results related to obesity and the food environment were reviewed, and implications for future research were synthesized. The reviewed studies used cross-sectional designs to examine the community food environment defined as the number per capita, proximity or density of food outlets. Most studies indirectly identified food outlets through large databases. The studies varied substantially in sample populations, outcome variables, units of measurement and data analysis. Two studies did not find any significant association between obesity rates and community food environment variables. Five studies found significant results. Many of the studies were subject to limitations that may have mitigated the validity of the results. Research examining obesity and the community or consumer food environment is at an early stage. The most pertinent gaps include primary data at the individual level, direct measures of the environment, studies examining the consumer environment and study designs involving a time sequence. Future research should directly measure multiple levels of the food environment and key confounders at the individual level.

The role of economic evaluation in the decision-making process of family physicians: design and methods of a qualitative embedded multiple-case study

PubMed Central

Lessard, Chantale; Contandriopoulos, André-Pierre; Beaulieu, Marie-Dominique

2009-01-01

Background A considerable amount of resource allocation decisions take place daily at the point of the clinical encounter; especially in primary care, where 80 percent of health problems are managed. Ignoring economic evaluation evidence in individual clinical decision-making may have a broad impact on the efficiency of health services. To date, almost all studies on the use of economic evaluation in decision-making used a quantitative approach, and few investigated decision-making at the clinical level. An important question is whether economic evaluations affect clinical practice. The project is an intervention research study designed to understand the role of economic evaluation in the decision-making process of family physicians (FPs). The contributions of the project will be from the perspective of Pierre Bourdieu's sociological theory. Methods/design A qualitative research strategy is proposed. We will conduct an embedded multiple-case study design. Ten case studies will be performed. The FPs will be the unit of analysis. The sampling strategies will be directed towards theoretical generalization. The 10 selected cases will be intended to reflect a diversity of FPs. There will be two embedded units of analysis: FPs (micro-level of analysis) and field of family medicine (macro-level of analysis). The division of the determinants of practice/behaviour into two groups, corresponding to the macro-structural level and the micro-individual level, is the basis for Bourdieu's mode of analysis. The sources of data collection for the micro-level analysis will be 10 life history interviews with FPs, documents and observational evidence. The sources of data collection for the macro-level analysis will be documents and 9 open-ended, focused interviews with key informants from medical associations and academic institutions. The analytic induction approach to data analysis will be used. A list of codes will be generated based on both the original framework and new themes introduced by the participants. We will conduct within-case and cross-case analyses of the data. Discussion The question of the role of economic evaluation in FPs' decision-making is of great interest to scientists, health care practitioners, managers and policy-makers, as well as to consultants, industry, and society. It is believed that the proposed research approach will make an original contribution to the development of knowledge, both empirical and theoretical. PMID:19210787

Gender differences in public office workers' satisfaction, subjective symptoms and musculoskeletal complaints in workplace and office environments.

PubMed

Lee, Sangbok; Park, Myoung Hwan; Jeong, Byung Yong

2018-06-01

This study investigates differences between male and female public office workers' satisfaction levels, sick building syndrome (SBS) symptoms and musculoskeletal disorder (MSD) complaints in workplace and office environments. Questionnaire surveys were performed in 30 offices from 15 public institutions. Male and female workers of the same age were coupled and selected from each office, gathering a total of 120 male and 120 female subjects. The results show that differences exist between genders in noise and lighting satisfaction levels, SBS-related symptoms (eye, nose, skin) and MSD complaints of hand/wrist/finger, while there is no difference in overall satisfaction level of office environments. The study also suggests that office design for public office workers should take into account gender differences in preventing MSDs and also SBS. The findings of this study are expected to serve as basic data for designing effective public office environments.

Enhanced Oceanic Operations Human-In-The-Loop In-Trail Procedure Validation Simulation Study

NASA Technical Reports Server (NTRS)

Murdoch, Jennifer L.; Bussink, Frank J. L.; Chamberlain, James P.; Chartrand, Ryan C.; Palmer, Michael T.; Palmer, Susan O.

2008-01-01

The Enhanced Oceanic Operations Human-In-The-Loop In-Trail Procedure (ITP) Validation Simulation Study investigated the viability of an ITP designed to enable oceanic flight level changes that would not otherwise be possible. Twelve commercial airline pilots with current oceanic experience flew a series of simulated scenarios involving either standard or ITP flight level change maneuvers and provided subjective workload ratings, assessments of ITP validity and acceptability, and objective performance measures associated with the appropriate selection, request, and execution of ITP flight level change maneuvers. In the majority of scenarios, subject pilots correctly assessed the traffic situation, selected an appropriate response (i.e., either a standard flight level change request, an ITP request, or no request), and executed their selected flight level change procedure, if any, without error. Workload ratings for ITP maneuvers were acceptable and not substantially higher than for standard flight level change maneuvers, and, for the majority of scenarios and subject pilots, subjective acceptability ratings and comments for ITP were generally high and positive. Qualitatively, the ITP was found to be valid and acceptable. However, the error rates for ITP maneuvers were higher than for standard flight level changes, and these errors may have design implications for both the ITP and the study's prototype traffic display. These errors and their implications are discussed.

Chemistry Textbooks--A Questionnaire and Discussion.

ERIC Educational Resources Information Center

Pawsey, R. H.

1979-01-01

Presents the results of a survey study conducted in the United Kingdom to identify the opinions of 65 chemistry teachers from Middlesex and Buckinghamshire about the use, costs, design, and content of 0 level and A level chemistry books. (HM)

Newman Unit 1 advanced solar repowering advanced conceptual design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1982-04-01

The Newman Unit 1 solar repowering design is a water/steam central receiver concept supplying superheated steam. The work reported is to develop a refined baseline conceptual design that has potential for construction and operation by 1986, makes use of existing solar thermal technology, and provides the best economics for this application. Trade studies performed in the design effort are described, both for the conceptual design of the overall system and for the subsystem conceptual design. System-level functional requirements, design, operation, performance, cost, safety, environmental, institutional, and regulatory considerations are described. Subsystems described include the collector, receiver, fossil energy, electrical powermore » generating, and master control subsystems, site and site facilities. The conceptual design, cost, and performance of each subsystem is discussed at length. A detailed economic analysis of the repowered unit is made to realistically assess the economics of the first repowered unit using present cost data for a limited production level for solar hardware. Finally, a development plan is given, including the design, procurement, construction, checkout, startup, performance validation, and commercial operation. (LEW)« less

Climate change reverses the competitive balance of ash and beech seedlings under simulated forest conditions.

PubMed

Saxe, H; Kerstiens, G

2005-07-01

This study identifies the important role of climate change and photosynthetic photon flux density (PPFD) in the regenerative competence of ash and beech seedlings in 12 inter- and intra-specific competition designs in simulated mixed ash-beech forest gaps under conditions of non-limiting soil volume, water and nutrient supply. The growth conditions simulated natural forest conditions as closely as possible. Simulations were performed by growing interacting seedling canopies for one season in temperature-regulated closed-top chambers (CTCs). Eight CTCs were used in a factorial design with replicate treatments of [CO2] x temperature x PPFD x competition design. [CO2] tracked ambient levels or was 360 micromol mol-1 higher. Temperature tracked ambient levels or was 2.8 degrees C higher. PPFD on two plant tables inside each CTC was 16% and 5% of open-field levels, respectively, representative of typical light flux levels in a natural forest gap. In several of the competition designs, climate change made the ash seedlings grow taller than the beech seedlings and, at the same time, attain a larger leaf area and a larger total biomass. Advantages of this type for ash were found particularly at lower PPFD. There was a positive synergistic interaction of elevated temperature x [CO2] for both species, but more so for ash. There are many uncertainties when a study of chambered seedlings is to be projected to real changes in natural forests. Nevertheless, this study supports a possible future shift towards ash in north European, unmanaged, mixed ash-beech forests in response to the predicted climate change.

Full long-term design response analysis of a wave energy converter

DOE PAGES

Coe, Ryan G.; Michelen, Carlos; Eckert-Gallup, Aubrey; ...

2017-09-21

Efficient design of wave energy converters requires an accurate understanding of expected loads and responses during the deployment lifetime of a device. A study has been conducted to better understand best-practices for prediction of design responses in a wave energy converter. A case-study was performed in which a simplified wave energy converter was analyzed to predict several important device design responses. The application and performance of a full long-term analysis, in which numerical simulations were used to predict the device response for a large number of distinct sea states, was studied. Environmental characterization and selection of sea states for thismore » analysis at the intended deployment site were performed using principle-components analysis. The full long-term analysis applied here was shown to be stable when implemented with a relatively low number of sea states and convergent with an increasing number of sea states. As the number of sea states utilized in the analysis was increased, predicted response levels did not change appreciably. Furthermore, uncertainty in the response levels was reduced as more sea states were utilized.« less

Full long-term design response analysis of a wave energy converter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coe, Ryan G.; Michelen, Carlos; Eckert-Gallup, Aubrey

Efficient design of wave energy converters requires an accurate understanding of expected loads and responses during the deployment lifetime of a device. A study has been conducted to better understand best-practices for prediction of design responses in a wave energy converter. A case-study was performed in which a simplified wave energy converter was analyzed to predict several important device design responses. The application and performance of a full long-term analysis, in which numerical simulations were used to predict the device response for a large number of distinct sea states, was studied. Environmental characterization and selection of sea states for thismore » analysis at the intended deployment site were performed using principle-components analysis. The full long-term analysis applied here was shown to be stable when implemented with a relatively low number of sea states and convergent with an increasing number of sea states. As the number of sea states utilized in the analysis was increased, predicted response levels did not change appreciably. Furthermore, uncertainty in the response levels was reduced as more sea states were utilized.« less

Design of helicopter rotors to noise constraints

NASA Technical Reports Server (NTRS)

Schaeffer, E. G.; Sternfeld, H., Jr.

1978-01-01

Results of the initial phase of a research project to study the design constraints on helicopter noise are presented. These include the calculation of nonimpulsive rotor harmonic and broadband hover noise spectra, over a wide range of rotor design variables and the sensitivity of perceived noise level (PNL) to changes in rotor design parameters. The prediction methodology used correlated well with measured whirl tower data. Application of the predictions to variations in rotor design showed tip speed and thrust as having the most effect on changing PNL.

Space shuttle hypergolic bipropellant RCS engine design study, Bell model 8701

NASA Technical Reports Server (NTRS)

1974-01-01

A research program was conducted to define the level of the current technology base for reaction control system rocket engines suitable for space shuttle applications. The project consisted of engine analyses, design, fabrication, and tests. The specific objectives are: (1) extrapolating current engine design experience to design of an RCS engine with required safety, reliability, performance, and operational capability, (2) demonstration of multiple reuse capability, and (3) identification of current design and technology deficiencies and critical areas for future effort.

The impact of selected educational factors on the academic achievement of secondary students

NASA Astrophysics Data System (ADS)

Epps, Bernethia Mechelle

The purpose of this study was to examine the impact of related educational factors on the mathematics and science achievement of secondary students. The researcher compared the variables of instructional design, economic status and retention against the exit level scores on the mathematics and science Texas Assessment of Knowledge and Skills (TAKS) test of 11th grade students. The technique used for this investigation was a Three-Way Analysis of Variance (ANOVA). Three hundred thirty five students from an urban school district in a metropolitan area in southeast Texas participated in this study. Ex-post facto data obtained from the district's student information system was utilized. Based on the results, the following conclusions were drawn. (1) Instructional design does impact mathematics and science achievement of students at the secondary level. (2) Retention during a student's ninth grade year does impact mathematics and science achievement. (3) The interaction of instructional design and retention does impact the mathematics and science achievement of students at the secondary level. (4) Economic status as a main effect or as an interaction effect does not impact mathematics and science achievement of students at the secondary level. For those seeking to explore this topic in greater depth, recommendations for further investigations might consider the study of teacher perceptions and attitudes toward students who attend school in the alternative setting. Additionally, future investigations might look into the level of experience and the reasons teachers choose to teach in the alternative setting.

Collaboration Levels in Asynchronous Discussion Forums: A Social Network Analysis Approach

ERIC Educational Resources Information Center

Luhrs, Cecilia; McAnally-Salas, Lewis

2016-01-01

Computer Supported Collaborative Learning literature relates high levels of collaboration to enhanced learning outcomes. However, an agreement on what is considered a high level of collaboration is unclear, especially if a qualitative approach is taken. This study describes how methods of Social Network Analysis were used to design a collaboration…

Remote mission specialist - A study in real-time, adaptive planning

NASA Technical Reports Server (NTRS)

Rokey, Mark J.

1990-01-01

A high-level planning architecture for robotic operations is presented. The remote mission specialist integrates high-level directives with low-level primitives executable by a run-time controller for command of autonomous servicing activities. The planner has been designed to address such issues as adaptive plan generation, real-time performance, and operator intervention.

Reading and Comprehension Levels in a Sample of Urban, Low-Income Persons

ERIC Educational Resources Information Center

Delgado, Cheryl; Weitzel, Marilyn

2013-01-01

Objective: Because health literacy is related to healthcare outcomes, this study looked at reading and comprehension levels in a sample of urban, low-income persons. Design: This was a descriptive exploration of reading comprehension levels, controlled for medical problems that could impact on vision and therefore ability to read. Setting: Ninety…

Program (Re)design Model: A Sustainable, System-Level Approach to Faculty Development

ERIC Educational Resources Information Center

Fowler, Debra; Macik, Maria L.; Sandoval, Carolyn L.; Bakenhus, Chelsea; MacWillie, Sherri

2016-01-01

Traditional professional development related to teaching is offered on a short-term basis and at the individual level. Recent experiences and research studies have led to an organizational level model in which the educational developer forms a sustained partnership with administrators, faculty, staff, and students in a department, offering…

Seismic Vulnerability and Performance Level of confined brick walls

NASA Astrophysics Data System (ADS)

Ghalehnovi, M.; Rahdar, H. A.

2008-07-01

There has been an increase on the interest of Engineers and designers to use designing methods based on displacement and behavior (designing based on performance) Regarding to the importance of resisting structure design against dynamic loads such as earthquake, and inability to design according to prediction of nonlinear behavior element caused by nonlinear properties of constructional material. Economically speaking, easy carrying out and accessibility of masonry material have caused an enormous increase in masonry structures in villages, towns and cities. On the other hand, there is a necessity to study behavior and Seismic Vulnerability in these kinds of structures since Iran is located on the earthquake belt of Alpide. Different reasons such as environmental, economic, social, cultural and accessible constructional material have caused different kinds of constructional structures. In this study, some tied walls have been modeled with software and with relevant accelerator suitable with geology conditions under dynamic analysis to research on the Seismic Vulnerability and performance level of confined brick walls. Results from this analysis seem to be satisfactory after comparison of them with the values in Code ATC40, FEMA and standard 2800 of Iran.

Latin American Study of Nutrition and Health (ELANS): rationale and study design.

PubMed

Fisberg, M; Kovalskys, I; Gómez, G; Rigotti, A; Cortés, L Y; Herrera-Cuenca, M; Yépez, M C; Pareja, R G; Guajardo, V; Zimberg, I Z; Chiavegatto Filho, A D P; Pratt, M; Koletzko, B; Tucker, K L

2016-01-30

Obesity is growing at an alarming rate in Latin America. Lifestyle behaviours such as physical activity and dietary intake have been largely associated with obesity in many countries; however studies that combine nutrition and physical activity assessment in representative samples of Latin American countries are lacking. The aim of this study is to present the design rationale of the Latin American Study of Nutrition and Health/Estudio Latinoamericano de Nutrición y Salud (ELANS) with a particular focus on its quality control procedures and recruitment processes. The ELANS is a multicenter cross-sectional nutrition and health surveillance study of a nationally representative sample of urban populations from eight Latin American countries (Argentina, Brazil, Chile, Colombia, Costa Rica, Ecuador, Perú and Venezuela). A standard study protocol was designed to evaluate the nutritional intakes, physical activity levels, and anthropometric measurements of 9000 enrolled participants. The study was based on a complex, multistage sample design and the sample was stratified by gender, age (15 to 65 years old) and socioeconomic level. A small-scale pilot study was performed in each country to test the procedures and tools. This study will provide valuable information and a unique dataset regarding Latin America that will enable cross-country comparisons of nutritional statuses that focus on energy and macro- and micronutrient intakes, food patterns, and energy expenditure. Clinical Trials NCT02226627.

Earth Observatory Satellite system definition study. Report 3: Design cost trade-off studies and recommendations

NASA Technical Reports Server (NTRS)

1974-01-01

An analysis of the design and cost tradeoff aspects of the Earth Observatory Satellite (EOS) development is presented. The design/cost factors that affect a series of mission/system level concepts are discussed. The subjects considered are as follows: (1) spacecraft subsystem cost tradeoffs, (2) ground system cost tradeoffs, and (3) program cost summary. Tables of data are provided to summarize the results of the analyses. Illustrations of the various spacecraft configurations are included.

The ABC's of Online Course Design According to Addie Model

ERIC Educational Resources Information Center

Durak, Gürhan; Ataizi, Murat

2016-01-01

The purpose of this study was to design the course of Programming Languages-I online, which is given on face-to-face basis at undergraduate level. It is seen in literature that there is no detailed research on the preparation of a fully-online course directly based on an instructional design model. In this respect, depending on the ADDIE design…

Design Research on Mathematics Education: Investigating the Progress of Indonesian Fifth Grade Students' Learning on Multiplication of Fractions with Natural Numbers

ERIC Educational Resources Information Center

Shanty, Nenden Octavarulia; Hartono, Yusuf; Putri, Ratu Ilma Indra; de Haan, Dede

2011-01-01

This study aimed at investigating the progress of students' learning on multiplication fractions with natural numbers through the five activity levels based on Realistic Mathematics Education (RME) approach proposed by Streefland. Design research was chosen to achieve this research goal. In design research, the Hypothetical Learning Trajectory…

An Empirical Comparison of Five Linear Equating Methods for the NEAT Design

ERIC Educational Resources Information Center

Suh, Youngsuk; Mroch, Andrew A.; Kane, Michael T.; Ripkey, Douglas R.

2009-01-01

In this study, a data base containing the responses of 40,000 candidates to 90 multiple-choice questions was used to mimic data sets for 50-item tests under the "nonequivalent groups with anchor test" (NEAT) design. Using these smaller data sets, we evaluated the performance of five linear equating methods for the NEAT design with five levels of…

Integrating Video-Capture Virtual Reality Technology into a Physically Interactive Learning Environment for English Learning

ERIC Educational Resources Information Center

Yang, Jie Chi; Chen, Chih Hung; Jeng, Ming Chang

2010-01-01

The aim of this study is to design and develop a Physically Interactive Learning Environment, the PILE system, by integrating video-capture virtual reality technology into a classroom. The system is designed for elementary school level English classes where students can interact with the system through physical movements. The system is designed to…

Development of an Integrated Process, Modeling and Simulation Platform for Performance-Based Design of Low-Energy and High IEQ Buildings

ERIC Educational Resources Information Center

Chen, Yixing

2013-01-01

The objective of this study was to develop a "Virtual Design Studio (VDS)": a software platform for integrated, coordinated and optimized design of green building systems with low energy consumption, high indoor environmental quality (IEQ), and high level of sustainability. The VDS is intended to assist collaborating architects,…

An Effective Introduction to Technology and Design in Norwegian Primary Education

ERIC Educational Resources Information Center

Kirkeby, Pal J.

2010-01-01

How can young pupils get "An effective introduction" to technology and design at the primary level in the Norwegian context? This question is highlighted with examples based on case studies at five classes in two schools doing their first technology and design project at grades 1 or 2 (age 6-8 years). The project was about air rockets.…

An integrated computer-based procedure for teamwork in digital nuclear power plants.

PubMed

Gao, Qin; Yu, Wenzhu; Jiang, Xiang; Song, Fei; Pan, Jiajie; Li, Zhizhong

2015-01-01

Computer-based procedures (CBPs) are expected to improve operator performance in nuclear power plants (NPPs), but they may reduce the openness of interaction between team members and harm teamwork consequently. To support teamwork in the main control room of an NPP, this study proposed a team-level integrated CBP that presents team members' operation status and execution histories to one another. Through a laboratory experiment, we compared the new integrated design and the existing individual CBP design. Sixty participants, randomly divided into twenty teams of three people each, were assigned to the two conditions to perform simulated emergency operating procedures. The results showed that compared with the existing CBP design, the integrated CBP reduced the effort of team communication and improved team transparency. The results suggest that this novel design is effective to optim team process, but its impact on the behavioural outcomes may be moderated by more factors, such as task duration. The study proposed and evaluated a team-level integrated computer-based procedure, which present team members' operation status and execution history to one another. The experimental results show that compared with the traditional procedure design, the integrated design reduces the effort of team communication and improves team transparency.

What contributes to a technical purchasing decision maker's reliance on brand name for design decisions involving I&T products

NASA Astrophysics Data System (ADS)

Coutoumanos, Vincent

The following research is intended to develop more formal mechanisms for collection, analysis, retention and dissemination of information relating to brand influence on high-technology products. Specifically, these high-technology products are associated with the engineering applications that likely would involve the loss of human life in the advent of catastrophic failure. The results of the study lead to an extension of theory involving marketing and product selection of "highly engineered" parts within the aerospace industry. The findings were separated into three distinct areas: 1) Information load will play a large role in the final design decision. If the designer is under a high level of information load during the time of a design decision, he or she likely will gravitate to the traditional design choice, regardless of the level of brand strength. 2) Even when strong brand names, like 3M, were offered as the non-traditional design choice, engineers gravitated to the traditional design choice that was presented in a mock Society for Manufacturing Engineers article. 3) Designer self-efficacy by itself will not often contribute to a decision maker's design choice. However, these data collected indicates that a combination of high designer self-efficacy moderated by high brand strength is likely to contribute significantly to a decision maker's decision. The post-hoc finding shows that many designers having high levels of self-efficacy could be developing a sense of comfort with strong brand names (like 3M) when making a design choice.

[Design and validation of a questionnaire to assess the level of general knowledge on eating disorders in students of Health Sciences].

PubMed

Sánchez Socarrás, Violeida; Aguilar Martínez, Alicia; Vaqué Crusellas, Cristina; Milá Villarroel, Raimon; González Rivas, Fabián

2016-01-01

To design and validate a questionnaire to assess the level of knowledge regarding eating disorders in college students. Observational, prospective, and longitudinal study, with the design of the questionnaire based on a conceptual review and validation by a cognitive pre-test and pilot test-retest, with analysis of the psychometric properties in each application. University Foundation of Bages, Barcelona. Marco community care. A total of 140 students from Health Sciences; 53 women and 87 men with a mean age of 21.87 years; 28 participated in the pre-test and 112 in the test-retests, 110 students completed the study. Validity and stability study using Cronbach α and Pearson product-moment correlation coefficient statistics; relationship skills with sex and type of study, non-parametric statistical Mann-Whitney and Kruskal-Wallis tests; for demographic variables, absolute or percentage frequencies, as well as mean, central tendency and standard deviation as measures of dispersion were calculated. The statistical significance level was 95% confidence. The questionnaire was obtained that had 10 questions divided into four dimensions (classification, demographics characteristics of patients, risk factors and clinical manifestations of eating disorders). The scale showed good internal consistency in its final version (Cronbach α=0.724) and adequate stability (Pearson correlation 0.749). The designed tool can be accurately used to assess Health Sciences students' knowledge of eating disorders. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

Estimation of design space for an extrusion-spheronization process using response surface methodology and artificial neural network modelling.

PubMed

Sovány, Tamás; Tislér, Zsófia; Kristó, Katalin; Kelemen, András; Regdon, Géza

2016-09-01

The application of the Quality by Design principles is one of the key issues of the recent pharmaceutical developments. In the past decade a lot of knowledge was collected about the practical realization of the concept, but there are still a lot of unanswered questions. The key requirement of the concept is the mathematical description of the effect of the critical factors and their interactions on the critical quality attributes (CQAs) of the product. The process design space (PDS) is usually determined by the use of design of experiment (DoE) based response surface methodologies (RSM), but inaccuracies in the applied polynomial models often resulted in the over/underestimation of the real trends and changes making the calculations uncertain, especially in the edge regions of the PDS. The completion of RSM with artificial neural network (ANN) based models is therefore a commonly used method to reduce the uncertainties. Nevertheless, since the different researches are focusing on the use of a given DoE, there is lack of comparative studies on different experimental layouts. Therefore, the aim of present study was to investigate the effect of the different DoE layouts (2 level full factorial, Central Composite, Box-Behnken, 3 level fractional and 3 level full factorial design) on the model predictability and to compare model sensitivities according to the organization of the experimental data set. It was revealed that the size of the design space could differ more than 40% calculated with different polynomial models, which was associated with a considerable shift in its position when higher level layouts were applied. The shift was more considerable when the calculation was based on RSM. The model predictability was also better with ANN based models. Nevertheless, both modelling methods exhibit considerable sensitivity to the organization of the experimental data set, and the use of design layouts is recommended, where the extreme values factors are more represented. Copyright © 2016 Elsevier B.V. All rights reserved.

Public health preparedness in Alberta: a systems-level study.

PubMed

Moore, Douglas; Shiell, Alan; Noseworthy, Tom; Russell, Margaret; Predy, Gerald

2006-12-28

Recent international and national events have brought critical attention to the Canadian public health system and how prepared the system is to respond to various types of contemporary public health threats. This article describes the study design and methods being used to conduct a systems-level analysis of public health preparedness in the province of Alberta, Canada. The project is being funded under the Health Research Fund, Alberta Heritage Foundation for Medical Research. We use an embedded, multiple-case study design, integrating qualitative and quantitative methods to measure empirically the degree of inter-organizational coordination existing among public health agencies in Alberta, Canada. We situate our measures of inter-organizational network ties within a systems-level framework to assess the relative influence of inter-organizational ties, individual organizational attributes, and institutional environmental features on public health preparedness. The relative contribution of each component is examined for two potential public health threats: pandemic influenza and West Nile virus. The organizational dimensions of public health preparedness depend on a complex mix of individual organizational characteristics, inter-agency relationships, and institutional environmental factors. Our study is designed to discriminate among these different system components and assess the independent influence of each on the other, as well as the overall level of public health preparedness in Alberta. While all agree that competent organizations and functioning networks are important components of public health preparedness, this study is one of the first to use formal network analysis to study the role of inter-agency networks in the development of prepared public health systems.

Mass of materials: the impact of designers on construction ergonomics.

PubMed

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

Relationship between NCE III Business Education Students Computational Skill and Their Cumulative Grade Point Average (CGPA) in Colleges of Education in Bauchi and Gombe States

ERIC Educational Resources Information Center

Chadi, Aishatu Muhammad

2017-01-01

The study aimed at establishing the relationship and prediction power of Business Education students' computational skill (CPS) on their academic performance (CGPA) at college of education level. Two research questions and two hypotheses were formulated for the study. The design of the study was a correlational survey design. The population of the…

Dallas area rapid transit LRT starter line assessment study design. Final research report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shunk, G.A.; Turnbull, K.F.; Lindquist, N.F.

1995-03-01

Light rail transit (LRT) systems have recently been implemented in a number of urban areas throughout the United States and additional projects are in various stages of planning and development. Questions have been raised concerning the impact of these systems on ridership levels, transit operating costs, regional mobility, land use, economic development, energy, air quality, congestion levels, and other factors. The implementation of the Dallas Area Rapid Transit (DART) LRT starter line provides the opportunity to assess the impact of an LRT system in a Southwestern city in the United States. This research project was undertaken to assist with themore » development of a comprehensive study design for assessing the effects of the DART LRT starter line. To accomplish this objective, a review was conducted of before-and-after studies of recent LRT, heavy rail, and high-occupancy vehicle (HOV) projects. The goals and objectives of the DART system were also reviewed and existing transportation-related data collection activities in the Dallas area were examined. This information was used to develop a preliminary study design for assessing the effects of the DART LRT starter line. This report documents the review of recent before-and-after studies and presents the preliminary study design for assessing the effects of the DART LRT starter line.« less

Effects of Reflective Inquiry Instructional Technique on Students' Academic Achievement and Ability Level in Electronic Work Trade in Technical Colleges

ERIC Educational Resources Information Center

Ogbuanya, T. C.; Owodunni, A. S.

2015-01-01

This study was designed to determine the effect of reflective inquiry instructional technique on achievement of students in Technical Colleges. The study adopted a pre-test, post-test, non-equivalent control group, quasi-experimental research design which involved groups of students in their intact class assigned to experimental group and control…

A NEW HOUSE DUST COLLECTION SYSTEM AND ITS USE IN A STUDY OF ASTHMA IN DUST MITE SENSITIVE CHILDREN IN RALEIGH, NORTH CAROLINA

EPA Science Inventory

A prototype dust collection system, the House Dust Vacuum One (HDVI), was designed for use in a study to investigate the relationship between house dust mite antigen levels and the presence of asthma in dust mite sensitive children. The HDVI was designed for the collection of dus...

Library 110: Introduction to Library Resources. An Independent Study Course. Second Edition, Revised.

ERIC Educational Resources Information Center

Alleman, Virginia; Davis, Ramona

This workbook is designed for use by students in conjunction with a one-unit college level independent study course with no formal group meeting or letter grades given. The workbook is designed to familiarize users with the facilities and resources of the college's library/learning center and aid in the development of skills that will be generally…

Rurality and Nursing Home Quality: Evidence from the 2004 National Nursing Home Survey

ERIC Educational Resources Information Center

Kang, Yu; Meng, Hongdao; Miller, Nancy A.

2011-01-01

Purpose of the Study: To evaluate the impact of rural geographic location on nursing home quality of care in the United States. Design and Methods: The study used cross-sectional observational design. We obtained resident- and facility-level data from 12,507 residents in 1,174 nursing homes from the 2004 National Nursing Home Survey. We used…

Teachers' Improvisation of Instructional Materials for Nigerian Home Economics Curriculum Delivery: Challenges and Strategies

ERIC Educational Resources Information Center

Olibie, Eyiuche Ifeoma; Nwabunwanne, Chinyere; Ezenwanne, Dorothy Nkem

2013-01-01

This study was designed to ascertain the challenges of improvising instructional materials by Home Economics teachers at the Upper Basic education level in Nigeria, and as a result identify strategies for enhancing improvisation. The study used survey research design based on two research questions. The sample was four hundred and thirty-one Home…

Explaining Variance and Identifying Predictors of Children's Communication via a Multilevel Model of Single-Case Design Research: Brief Report

ERIC Educational Resources Information Center

Ottley, Jennifer Riggie; Ferron, John M.; Hanline, Mary Frances

2016-01-01

The purpose of this study was to explain the variability in data collected from a single-case design study and to identify predictors of communicative outcomes for children with developmental delays or disabilities (n = 4). Using SAS® University Edition, we fit multilevel models with time nested within children. Children's level of baseline…

Student Perceptions in the Design of a Computer Card Game for Learning Computer Literacy Issues: A Case Study

ERIC Educational Resources Information Center

Kordaki, Maria; Papastergiou, Marina; Psomos, Panagiotis

2016-01-01

The aim of this work was twofold. First, an empirical study was designed aimed at investigating the perceptions that entry-level non-computing majors--namely Physical Education and Sport Science (PESS) undergraduate students--hold about basic Computer Literacy (CL) issues. The participants were 90 first-year PESS students, and their perceptions…

An Action Research Study Using the Music Model of Academic Motivation to Increase Reading Motivation in a Fourth-Grade Classroom

ERIC Educational Resources Information Center

Williams, Angela W.

2013-01-01

This study involved examination of the processes employed in tailoring fourth-grade reading instruction to increase levels of student motivation. A participatory action research approach was utilized to design and conduct reading instruction that fourth-grade students perceived to be motivating. The reading instructional program was designed using…

The Analysis of the Opinions of School Directors about Their Knowledge of the Curriculums and Their Support and Control in the Implementation

ERIC Educational Resources Information Center

Ozkan, Hasan Huseyin

2016-01-01

This study analyses the opinions of school directors related to their levels of recognition, comprehension and explanation, along with their support and their supervisory duties in the process of the implementation of the curriculum. Although this study is designed appropriately to the qualitative research design, phenomenological research design…

Integrated source and channel encoded digital communication system design study

NASA Technical Reports Server (NTRS)

Huth, G. K.; Trumpis, B. D.; Udalov, S.

1975-01-01

Various aspects of space shuttle communication systems were studied. The following major areas were investigated: burst error correction for shuttle command channels; performance optimization and design considerations for Costas receivers with and without bandpass limiting; experimental techniques for measuring low level spectral components of microwave signals; and potential modulation and coding techniques for the Ku-band return link. Results are presented.

Two-level optimization of composite wing structures based on panel genetic optimization

NASA Astrophysics Data System (ADS)

Liu, Boyang

The design of complex composite structures used in aerospace or automotive vehicles presents a major challenge in terms of computational cost. Discrete choices for ply thicknesses and ply angles leads to a combinatorial optimization problem that is too expensive to solve with presently available computational resources. We developed the following methodology for handling this problem for wing structural design: we used a two-level optimization approach with response-surface approximations to optimize panel failure loads for the upper-level wing optimization. We tailored efficient permutation genetic algorithms to the panel stacking sequence design on the lower level. We also developed approach for improving continuity of ply stacking sequences among adjacent panels. The decomposition approach led to a lower-level optimization of stacking sequence with a given number of plies in each orientation. An efficient permutation genetic algorithm (GA) was developed for handling this problem. We demonstrated through examples that the permutation GAs are more efficient for stacking sequence optimization than a standard GA. Repair strategies for standard GA and the permutation GAs for dealing with constraints were also developed. The repair strategies can significantly reduce computation costs for both standard GA and permutation GA. A two-level optimization procedure for composite wing design subject to strength and buckling constraints is presented. At wing-level design, continuous optimization of ply thicknesses with orientations of 0°, 90°, and +/-45° is performed to minimize weight. At the panel level, the number of plies of each orientation (rounded to integers) and inplane loads are specified, and a permutation genetic algorithm is used to optimize the stacking sequence. The process begins with many panel genetic optimizations for a range of loads and numbers of plies of each orientation. Next, a cubic polynomial response surface is fitted to the optimum buckling load. The resulting response surface is used for wing-level optimization. In general, complex composite structures consist of several laminates. A common problem in the design of such structures is that some plies in the adjacent laminates terminate in the boundary between the laminates. These discontinuities may cause stress concentrations and may increase manufacturing difficulty and cost. We developed measures of continuity of two adjacent laminates. We studied tradeoffs between weight and continuity through a simple composite wing design. Finally, we compared the two-level optimization to a single-level optimization based on flexural lamination parameters. The single-level optimization is efficient and feasible for a wing consisting of unstiffened panels.

Precision, time, and cost: a comparison of three sampling designs in an emergency setting.

PubMed

Deitchler, Megan; Deconinck, Hedwig; Bergeron, Gilles

2008-05-02

The conventional method to collect data on the health, nutrition, and food security status of a population affected by an emergency is a 30 x 30 cluster survey. This sampling method can be time and resource intensive and, accordingly, may not be the most appropriate one when data are needed rapidly for decision making. In this study, we compare the precision, time and cost of the 30 x 30 cluster survey with two alternative sampling designs: a 33 x 6 cluster design (33 clusters, 6 observations per cluster) and a 67 x 3 cluster design (67 clusters, 3 observations per cluster). Data for each sampling design were collected concurrently in West Darfur, Sudan in September-October 2005 in an emergency setting. Results of the study show the 30 x 30 design to provide more precise results (i.e. narrower 95% confidence intervals) than the 33 x 6 and 67 x 3 design for most child-level indicators. Exceptions are indicators of immunization and vitamin A capsule supplementation coverage which show a high intra-cluster correlation. Although the 33 x 6 and 67 x 3 designs provide wider confidence intervals than the 30 x 30 design for child anthropometric indicators, the 33 x 6 and 67 x 3 designs provide the opportunity to conduct a LQAS hypothesis test to detect whether or not a critical threshold of global acute malnutrition prevalence has been exceeded, whereas the 30 x 30 design does not. For the household-level indicators tested in this study, the 67 x 3 design provides the most precise results. However, our results show that neither the 33 x 6 nor the 67 x 3 design are appropriate for assessing indicators of mortality. In this field application, data collection for the 33 x 6 and 67 x 3 designs required substantially less time and cost than that required for the 30 x 30 design. The findings of this study suggest the 33 x 6 and 67 x 3 designs can provide useful time- and resource-saving alternatives to the 30 x 30 method of data collection in emergency settings.

Precision, time, and cost: a comparison of three sampling designs in an emergency setting

PubMed Central

Deitchler, Megan; Deconinck, Hedwig; Bergeron, Gilles

2008-01-01

The conventional method to collect data on the health, nutrition, and food security status of a population affected by an emergency is a 30 × 30 cluster survey. This sampling method can be time and resource intensive and, accordingly, may not be the most appropriate one when data are needed rapidly for decision making. In this study, we compare the precision, time and cost of the 30 × 30 cluster survey with two alternative sampling designs: a 33 × 6 cluster design (33 clusters, 6 observations per cluster) and a 67 × 3 cluster design (67 clusters, 3 observations per cluster). Data for each sampling design were collected concurrently in West Darfur, Sudan in September-October 2005 in an emergency setting. Results of the study show the 30 × 30 design to provide more precise results (i.e. narrower 95% confidence intervals) than the 33 × 6 and 67 × 3 design for most child-level indicators. Exceptions are indicators of immunization and vitamin A capsule supplementation coverage which show a high intra-cluster correlation. Although the 33 × 6 and 67 × 3 designs provide wider confidence intervals than the 30 × 30 design for child anthropometric indicators, the 33 × 6 and 67 × 3 designs provide the opportunity to conduct a LQAS hypothesis test to detect whether or not a critical threshold of global acute malnutrition prevalence has been exceeded, whereas the 30 × 30 design does not. For the household-level indicators tested in this study, the 67 × 3 design provides the most precise results. However, our results show that neither the 33 × 6 nor the 67 × 3 design are appropriate for assessing indicators of mortality. In this field application, data collection for the 33 × 6 and 67 × 3 designs required substantially less time and cost than that required for the 30 × 30 design. The findings of this study suggest the 33 × 6 and 67 × 3 designs can provide useful time- and resource-saving alternatives to the 30 × 30 method of data collection in emergency settings. PMID:18454866

Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study, volume 2

NASA Technical Reports Server (NTRS)

1981-01-01

The engine requirements are emphasized and include: high specific impulse within a restricted installed length constraint, long life, multiple starts, different thrust levels, and man-rated reliability. The engine operating characteristics and the major component analytical design are summarized.

Workshop on data acquisition and trigger system simulations for high energy physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1992-12-31

This report discusses the following topics: DAQSIM: A data acquisition system simulation tool; Front end and DCC Simulations for the SDC Straw Tube System; Simulation of Non-Blocklng Data Acquisition Architectures; Simulation Studies of the SDC Data Collection Chip; Correlation Studies of the Data Collection Circuit & The Design of a Queue for this Circuit; Fast Data Compression & Transmission from a Silicon Strip Wafer; Simulation of SCI Protocols in Modsim; Visual Design with vVHDL; Stochastic Simulation of Asynchronous Buffers; SDC Trigger Simulations; Trigger Rates, DAQ & Online Processing at the SSC; Planned Enhancements to MODSEM II & SIMOBJECT -- anmore » Overview -- R.; DAGAR -- A synthesis system; Proposed Silicon Compiler for Physics Applications; Timed -- LOTOS in a PROLOG Environment: an Algebraic language for Simulation; Modeling and Simulation of an Event Builder for High Energy Physics Data Acquisition Systems; A Verilog Simulation for the CDF DAQ; Simulation to Design with Verilog; The DZero Data Acquisition System: Model and Measurements; DZero Trigger Level 1.5 Modeling; Strategies Optimizing Data Load in the DZero Triggers; Simulation of the DZero Level 2 Data Acquisition System; A Fast Method for Calculating DZero Level 1 Jet Trigger Properties and Physics Input to DAQ Studies.« less

Implied preference for seismic design level and earthquake insurance.

PubMed

Goda, K; Hong, H P

2008-04-01

Seismic risk can be reduced by implementing newly developed seismic provisions in design codes. Furthermore, financial protection or enhanced utility and happiness for stakeholders could be gained through the purchase of earthquake insurance. If this is not so, there would be no market for such insurance. However, perceived benefit associated with insurance is not universally shared by stakeholders partly due to their diverse risk attitudes. This study investigates the implied seismic design preference with insurance options for decisionmakers of bounded rationality whose preferences could be adequately represented by the cumulative prospect theory (CPT). The investigation is focused on assessing the sensitivity of the implied seismic design preference with insurance options to model parameters of the CPT and to fair and unfair insurance arrangements. Numerical results suggest that human cognitive limitation and risk perception can affect the implied seismic design preference by the CPT significantly. The mandatory purchase of fair insurance will lead the implied seismic design preference to the optimum design level that is dictated by the minimum expected lifecycle cost rule. Unfair insurance decreases the expected gain as well as its associated variability, which is preferred by risk-averse decisionmakers. The obtained results of the implied preference for the combination of the seismic design level and insurance option suggest that property owners, financial institutions, and municipalities can take advantage of affordable insurance to establish successful seismic risk management strategies.

A Spreadsheet Simulation Tool for Terrestrial and Planetary Balloon Design

NASA Technical Reports Server (NTRS)

Raquea, Steven M.

1999-01-01

During the early stages of new balloon design and development, it is necessary to conduct many trade studies. These trade studies are required to determine the design space, and aid significantly in determining overall feasibility. Numerous point designs then need to be generated as details of payloads, materials, mission, and manufacturing are determined. To accomplish these numerous designs, transient models are both unnecessary and time intensive. A steady state model that uses appropriate design inputs to generate system-level descriptive parameters can be very flexible and fast. Just such a steady state model has been developed and has been used during both the MABS 2001 Mars balloon study and the Ultra Long Duration Balloon Project. Using Microsoft Excel's built-in iteration routine, a model was built. Separate sheets were used for performance, structural design, materials, and thermal analysis as well as input and output sheets. As can be seen from figure 1, the model takes basic performance requirements, weight estimates, design parameters, and environmental conditions and generates a system level balloon design. Figure 2 shows a sample output of the model. By changing the inputs and a few of the equations in the model, balloons on earth or other planets can be modeled. There are currently several variations of the model for terrestrial and Mars balloons, as well there are versions of the model that perform crude material design based on strength and weight requirements. To perform trade studies, the Visual Basic language built into Excel was used to create an automated matrix of designs. This trade study module allows a three dimensional trade surface to be generated by using a series of values for any two design variables. Once the fixed and variable inputs are defined, the model automatically steps through the input matrix and fills a spreadsheet with the resulting point designs. The proposed paper will describe the model in detail, including current variations. The assumptions, governing equations, and capabilities will be addressed. Detailed examples of the model in practice will also be used.

Study unique artistic lopburi province for design brass tea set of bantahkrayang community

NASA Astrophysics Data System (ADS)

Pliansiri, V.; Seviset, S.

2017-07-01

The objectives of this study were as follows: 1) to study the production process of handcrafted Brass Tea Set; and 2) to design and develop the handcrafted of Brass Tea Set. The process of design was started by mutual analytical processes and conceptual framework for product design, Quality Function Deployment, Theory of Inventive Problem Solving, Principles of Craft Design, and Principle of Reverse Engineering. The experts in field of both Industrial Product Design and Brass Handicraft Product, have evaluated the Brass Tea Set design and created prototype of Brass tea set by the sample of consumers who have ever bought the Brass Tea Set of Bantahkrayang Community on this research. The statistics methods used were percentage, mean ({{{\\overline X}} = }) and standard deviation (S.D.) 3. To assess consumer satisfaction toward of handcrafted Brass tea set was at the high level.

Design and optimization for the occupant restraint system of vehicle based on a single freedom model

NASA Astrophysics Data System (ADS)

Zhang, Junyuan; Ma, Yue; Chen, Chao; Zhang, Yan

2013-05-01

Throughout the vehicle crash event, the interactions between vehicle, occupant, restraint system (VOR) are complicated and highly non-linear. CAE and physical tests are the most widely used in vehicle passive safety development, but they can only be done with the detailed 3D model or physical samples. Often some design errors and imperfections are difficult to correct at that time, and a large amount of time will be needed. A restraint system concept design approach which based on single-degree-of-freedom occupant-vehicle model (SDOF) is proposed in this paper. The interactions between the restraint system parameters and the occupant responses in a crash are studied from the view of mechanics and energy. The discrete input and the iterative algorithm method are applied to the SDOF model to get the occupant responses quickly for arbitrary excitations (impact pulse) by MATLAB. By studying the relationships between the ridedown efficiency, the restraint stiffness, and the occupant response, the design principle of the restraint stiffness aiming to reduce occupant injury level during conceptual design is represented. Higher ridedown efficiency means more occupant energy absorbed by the vehicle, but the research result shows that higher ridedown efficiency does not mean lower occupant injury level. A proper restraint system design principle depends on two aspects. On one hand, the restraint system should lead to as high ridedown efficiency as possible, and at the same time, the restraint system should maximize use of the survival space to reduce the occupant deceleration level. As an example, an optimization of a passenger vehicle restraint system is designed by the concept design method above, and the final results are validated by MADYMO, which is the most widely used software in restraint system design, and the sled test. Consequently, a guideline and method for the occupant restraint system concept design is established in this paper.

Biased feedback in brain-computer interfaces.

PubMed

Barbero, Alvaro; Grosse-Wentrup, Moritz

2010-07-27

Even though feedback is considered to play an important role in learning how to operate a brain-computer interface (BCI), to date no significant influence of feedback design on BCI-performance has been reported in literature. In this work, we adapt a standard motor-imagery BCI-paradigm to study how BCI-performance is affected by biasing the belief subjects have on their level of control over the BCI system. Our findings indicate that subjects already capable of operating a BCI are impeded by inaccurate feedback, while subjects normally performing on or close to chance level may actually benefit from an incorrect belief on their performance level. Our results imply that optimal feedback design in BCIs should take into account a subject's current skill level.

Doping optimization of polypyrrole with toluenesulfonic acid using Box-Behnken design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Syed Draman, Sarifah Fauziah; Daik, Rusli; El-Sheikh, Said M.

A three-level Box-Behnken design was employed in doping optimization of polypyrrole with toluenesulfonic acid (TSA-doped PPy). The material was synthesized via chemical oxidative polymerization using pyrrole, toluenesulfonic acid (TSA) and ammonium persulfate (APS) as monomer, dopant and oxidant, respectively. The critical factors selected for this study were concentration of dopant, molar ratio between dopant to monomer (pyrrole) and concentration of oxidant. Obtaining adequate doping level of TSA-doped PPy is crucial because it affects the charge carriers for doped PPy and usually be responsible for electronic mobility along polymeric chain. Furthermore, the doping level also affects other properties such as electricalmore » and thermal conductivity. Doping level was calculated using elemental analysis. SEM images shows that the prepared TSA-doped PPy particles are spherical in shape with the diameters of about. The range of nanoparticles size is around 80-100 nm. The statistical analysis based on a Box–Behnken design showed that 0.01 mol of TSA, 1:1 mole ratio TSA to pyrrole and 0.25 M APS were the optimum conditions for sufficient doping level.« less

The backend design of an environmental monitoring system upon real-time prediction of groundwater level fluctuation under the hillslope.

PubMed

Lin, Hsueh-Chun; Hong, Yao-Ming; Kan, Yao-Chiang

2012-01-01

The groundwater level represents a critical factor to evaluate hillside landslides. A monitoring system upon the real-time prediction platform with online analytical functions is important to forecast the groundwater level due to instantaneously monitored data when the heavy precipitation raises the groundwater level under the hillslope and causes instability. This study is to design the backend of an environmental monitoring system with efficient algorithms for machine learning and knowledge bank for the groundwater level fluctuation prediction. A Web-based platform upon the model-view controller-based architecture is established with technology of Web services and engineering data warehouse to support online analytical process and feedback risk assessment parameters for real-time prediction. The proposed system incorporates models of hydrological computation, machine learning, Web services, and online prediction to satisfy varieties of risk assessment requirements and approaches of hazard prevention. The rainfall data monitored from the potential landslide area at Lu-Shan, Nantou and Li-Shan, Taichung, in Taiwan, are applied to examine the system design.

Do Prospective Classroom Teachers Perceive Themselves as Effective and Willing to Teach Young Learners English?

ERIC Educational Resources Information Center

Sad, Süleyman Nihat

2015-01-01

This study aimed to investigate the perceived efficacy and willingness levels of prospective classroom teachers to teach English at the primary level. The study was designed as a baseline descriptive survey, followed by complementary correlational and ex post facto models. Participants were 251 prospective classroom teachers. Data was collected…

Remediation of Math Anxiety in Preservice Elementary School Teachers

ERIC Educational Resources Information Center

Dunkle, Susan M.

2010-01-01

The purpose of this study was to measure the level of math anxiety in preservice elementary teachers, and then to determine if remediation methods would lower the measured level of anxiety in these same preservice teachers. The 10-day study provided an intense remediation using a time-series design to measure change on the Revised Math Anxiety…

An Investigation Regarding the Preservice Teachers' Emotional Literacy Levels and Self-Efficacy Beliefs

ERIC Educational Resources Information Center

Küçüktepe, Seval Eminoglu; Akbag, Müge; Özmercan, Esra Eminoglu

2017-01-01

Self-efficacy beliefs and emotional literacy skills are considered as one of the most fundamental characteristics of teachers to create positive effects on students. The aim of this study is to investigate the relationship between preservice teachers' self-efficacy beliefs and their emotional literacy levels. This study is designed as a relational…

Identification of Prospective Science Teachers' Mathematical-Logical Structures in Reference to Magnetism

ERIC Educational Resources Information Center

Yilmaz, Ismail

2014-01-01

This paper is a qualitative case study designed to identify prospective science teachers' mathematical-logical structures on the basis of their knowledge and achievement levels in magnetism. The study also made an attempt to reveal the effects of knowledge-level variables and procedural variables, which were considered to be potential…

Homogeneous Grouping and the Individualization of Instruction in Remedial Reading in an Intermediate School.

ERIC Educational Resources Information Center

Kelly, Thomas F.

A remedial reading program designed for intermediate-grade students who read from 1 to 7 years below grade level was studied. The program provided individualized instruction within classes homogeneously grouped on the basis of reading level only. Six seventh-grade classes were studied, with three acting as homogeneously grouped experimental…

The Meaning of Working among Professional Employees in Germany, Poland and Russia

ERIC Educational Resources Information Center

Kuchinke, K. Peter; Ardichvili, Alexandre; Borchert, Margret; Rozanski, Andrzej

2009-01-01

Purpose: The purpose of this paper is to report the results of an empirical study of the meaning of working, individual level work outcomes, and job and career satisfaction, among professional level employees in business organizations in Russia, Poland, and Germany. Design/methodology/approach: The theoretical framework for the study was based on…

Individualized Study Guide on Apiculture: Student Guide. Curriculum Materials for Agricultural Education.

ERIC Educational Resources Information Center

Housmam, John L.; And Others

The study guide contains introductory level information, principles and management practices which may be applied by a hobbyist or a commercial apiary. The lessons are designed to train students for entry level jobs, to establish students in a beekeeping enterprise, and to emphasize the importance of honey bees in our daily lives and in…

A Mixed Methods Study of the Relationship between Student Perceptions of Teacher-Student Interactions and Motivation in Middle Level Science

ERIC Educational Resources Information Center

Smart, Julie B.

2014-01-01

This mixed-methods study examined the relationship between middle level science students' perceptions of teacher-student interactions and students' science motivation, particulary their efficacy, value, and goal orientation for learning science. In this sequential explanatory design, quantitative and qualitative data were collected in two phases,…

Pushing for Particulate Level Models of Adiabatic and Isothermal Processes in Upper-Level Chemistry Courses: A Qualitative Study

ERIC Educational Resources Information Center

Hernandez, Gabriel E.; Criswell, Brett A.; Kirk, Nancy J.; Sauder, Deborah G.; Rushton, Gregory T.

2014-01-01

In the past three decades, researchers have noted the limitations of a problem-solving approach that overemphasizes algorithms and quantitation and neglects student misconceptions and an otherwise qualitative, conceptual understanding of chemical phenomena. Since then, studies and lessons designed to improve student understanding of chemistry has…

How Depressive Levels Are Related to the Adults' Experiences of Lower-Limb Amputation: A Mixed Methods Pilot Study

ERIC Educational Resources Information Center

Senra, Hugo

2013-01-01

The current pilot study aims to explore whether different adults' experiences of lower-limb amputation could be associated with different levels of depression. To achieve these study objectives, a convergent parallel mixed methods design was used in a convenience sample of 42 adult amputees (mean age of 61 years; SD = 13.5). All of them had…

A Comparison of Level of Discrimination Directed at Academic Staff in a Turkish and an Azerbaijani University

ERIC Educational Resources Information Center

Halici, Ali; Kasimoglu, Murat

2006-01-01

Purpose: The aim of this study is to understand the level of discrimination against academic staff in a Turkish and an Azerbaijani university. This research is the last stage of a four-stage study. Design/methodology/approach: In the first part of the study, the areas of discrimination in universities were determined using approaches related to…

"Growing Up" through the Middle Level Years: A Case Study in Leadership Actions Necessary to Meet Students' Needs

ERIC Educational Resources Information Center

Smith, M. Melissa Richard

2010-01-01

The purpose of this qualitative study was to examine the journey of a suburban middle level principal, as she led a school through an educational change process. This was a single case study design involving the school leader as principal participant, and the researcher as participant observer. The theoretical model that was developed for this…

Effectiveness of E-Content Package on Teaching IUPAC Nomenclature of Organic Chemistry at Undergraduate Level

ERIC Educational Resources Information Center

Devendiran, G.; Vakkil, M.

2017-01-01

This study attempts to discover the effectiveness of an e-content package when teaching IUPAC nomenclature of organic chemistry at the undergraduate level. The study consisted of a Pre-test-Post-test Non Equivalent Groups Design, and the sample of 71 (n = 71) students were drawn from two colleges. The overall study was divided into two groups, an…

Foundations for Success in the Teaching of O-Level Mathematics in Rural Day Secondary Schools in Masvingo District

ERIC Educational Resources Information Center

Mupa, Paul

2015-01-01

The growing failure rate in Mathematics at O-level is cause for concern and warrants an in-depth investigation. This study focused on factors that make the foundation of success in the teaching and learning of Mathematics. The study was qualitative and employed a case study design. Semi-structured interviews were used as data generation tool. The…

Student Study Guide - Water Quality Monitoring Approach to Watershed Studies. Presumpscot River Education Project.

ERIC Educational Resources Information Center

Bennett, Dean B.; Zaitlin, Samuel

This guide is designed for both independent study and class use. It provides the basis for a unit in a science class for the secondary school level. At the undergraduate college level, it provides an outline of activities for a contract as part of an education or science course. The lessons in the guide concentrate on the application of science…

Verification and Validation in a Rapid Software Development Process

NASA Technical Reports Server (NTRS)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

Using interactive visual reasoning to support sense-making: implications for design.

PubMed

Kodagoda, Neesha; Attfield, Simon; Wong, B L William; Rooney, Chris; Choudhury, Sharmin Tinni

2013-12-01

This research aims to develop design guidelines for systems that support investigators and analysts in the exploration and assembly of evidence and inferences. We focus here on the problem of identifying candidate 'influencers' within a community of practice. To better understand this problem and its related cognitive and interaction needs, we conducted a user study using a system called INVISQUE (INteractive Visual Search and QUery Environment) loaded with content from the ACM Digital Library. INVISQUE supports search and manipulation of results over a freeform infinite 'canvas'. The study focuses on the representations user create and their reasoning process. It also draws on some pre-established theories and frameworks related to sense-making and cognitive work in general, which we apply as a 'theoretical lenses' to consider findings and articulate solutions. Analysing the user-study data in the light of these provides some understanding of how the high-level problem of identifying key players within a domain can translate into lower-level questions and interactions. This, in turn, has informed our understanding of representation and functionality needs at a level of description which abstracts away from the specifics of the problem at hand to the class of problems of interest. We consider the study outcomes from the perspective of implications for design.

First-principles modeling of biological systems and structure-based drug-design.

PubMed

Sgrignani, Jacopo; Magistrato, Alessandra

2013-03-01

Molecular modeling techniques play a relevant role in drug design providing detailed information at atomistic level on the structural, dynamical, mechanistic and electronic properties of biological systems involved in diseases' onset, integrating and supporting commonly used experimental approaches. These information are often not accessible to the experimental techniques taken singularly, but are of crucial importance for drug design. Due to the enormous increase of the computer power in the last decades, quantum mechanical (QM) or first-principles-based methods have become often used to address biological issues of pharmaceutical relevance, providing relevant information for drug design. Due to their complexity and their size, biological systems are often investigated by means of a mixed quantum-classical (QM/MM) approach, which treats at an accurate QM level a limited chemically relevant portion of the system and at the molecular mechanics (MM) level the remaining of the biomolecule and its environment. This method provides a good compromise between computational cost and accuracy, allowing to characterize the properties of the biological system and the (free) energy landscape of the process in study with the accuracy of a QM description. In this review, after a brief introduction of QM and QM/MM methods, we will discuss few representative examples, taken from our work, of the application of these methods in the study of metallo-enzymes of pharmaceutical interest, of metal-containing anticancer drugs targeting the DNA as well as of neurodegenerative diseases. The information obtained from these studies may provide the basis for a rationale structure-based drug design of new and more efficient inhibitors or drugs.

Protecting count queries in study design

PubMed Central

Sarwate, Anand D; Boxwala, Aziz A

2012-01-01

Objective Today's clinical research institutions provide tools for researchers to query their data warehouses for counts of patients. To protect patient privacy, counts are perturbed before reporting; this compromises their utility for increased privacy. The goal of this study is to extend current query answer systems to guarantee a quantifiable level of privacy and allow users to tailor perturbations to maximize the usefulness according to their needs. Methods A perturbation mechanism was designed in which users are given options with respect to scale and direction of the perturbation. The mechanism translates the true count, user preferences, and a privacy level within administrator-specified bounds into a probability distribution from which the perturbed count is drawn. Results Users can significantly impact the scale and direction of the count perturbation and can receive more accurate final cohort estimates. Strong and semantically meaningful differential privacy is guaranteed, providing for a unified privacy accounting system that can support role-based trust levels. This study provides an open source web-enabled tool to investigate visually and numerically the interaction between system parameters, including required privacy level and user preference settings. Conclusions Quantifying privacy allows system administrators to provide users with a privacy budget and to monitor its expenditure, enabling users to control the inevitable loss of utility. While current measures of privacy are conservative, this system can take advantage of future advances in privacy measurement. The system provides new ways of trading off privacy and utility that are not provided in current study design systems. PMID:22511018

Protecting count queries in study design.

PubMed

Vinterbo, Staal A; Sarwate, Anand D; Boxwala, Aziz A

2012-01-01

Today's clinical research institutions provide tools for researchers to query their data warehouses for counts of patients. To protect patient privacy, counts are perturbed before reporting; this compromises their utility for increased privacy. The goal of this study is to extend current query answer systems to guarantee a quantifiable level of privacy and allow users to tailor perturbations to maximize the usefulness according to their needs. A perturbation mechanism was designed in which users are given options with respect to scale and direction of the perturbation. The mechanism translates the true count, user preferences, and a privacy level within administrator-specified bounds into a probability distribution from which the perturbed count is drawn. Users can significantly impact the scale and direction of the count perturbation and can receive more accurate final cohort estimates. Strong and semantically meaningful differential privacy is guaranteed, providing for a unified privacy accounting system that can support role-based trust levels. This study provides an open source web-enabled tool to investigate visually and numerically the interaction between system parameters, including required privacy level and user preference settings. Quantifying privacy allows system administrators to provide users with a privacy budget and to monitor its expenditure, enabling users to control the inevitable loss of utility. While current measures of privacy are conservative, this system can take advantage of future advances in privacy measurement. The system provides new ways of trading off privacy and utility that are not provided in current study design systems.

An investigation of signal performance enhancements achieved through innovative pixel design across several generations of indirect detection, active matrix, flat-panel arrays

PubMed Central

Antonuk, Larry E.; Zhao, Qihua; El-Mohri, Youcef; Du, Hong; Wang, Yi; Street, Robert A.; Ho, Jackson; Weisfield, Richard; Yao, William

2009-01-01

Active matrix flat-panel imager (AMFPI) technology is being employed for an increasing variety of imaging applications. An important element in the adoption of this technology has been significant ongoing improvements in optical signal collection achieved through innovations in indirect detection array pixel design. Such improvements have a particularly beneficial effect on performance in applications involving low exposures and∕or high spatial frequencies, where detective quantum efficiency is strongly reduced due to the relatively high level of additive electronic noise compared to signal levels of AMFPI devices. In this article, an examination of various signal properties, as determined through measurements and calculations related to novel array designs, is reported in the context of the evolution of AMFPI pixel design. For these studies, dark, optical, and radiation signal measurements were performed on prototype imagers incorporating a variety of increasingly sophisticated array designs, with pixel pitches ranging from 75 to 127 μm. For each design, detailed measurements of fundamental pixel-level properties conducted under radiographic and fluoroscopic operating conditions are reported and the results are compared. A series of 127 μm pitch arrays employing discrete photodiodes culminated in a novel design providing an optical fill factor of ∼80% (thereby assuring improved x-ray sensitivity), and demonstrating low dark current, very low charge trapping and charge release, and a large range of linear signal response. In two of the designs having 75 and 90 μm pitches, a novel continuous photodiode structure was found to provide fill factors that approach the theoretical maximum of 100%. Both sets of novel designs achieved large fill factors by employing architectures in which some, or all of the photodiode structure was elevated above the plane of the pixel addressing transistor. Generally, enhancement of the fill factor in either discrete or continuous photodiode arrays was observed to result in no degradation in MTF due to charge sharing between pixels. While the continuous designs exhibited relatively high levels of charge trapping and release, as well as shorter ranges of linearity, it is possible that these behaviors can be addressed through further refinements to pixel design. Both the continuous and the most recent discrete photodiode designs accommodate more sophisticated pixel circuitry than is present on conventional AMFPIs – such as a pixel clamp circuit, which is demonstrated to limit signal saturation under conditions corresponding to high exposures. It is anticipated that photodiode structures such as the ones reported in this study will enable the development of even more complex pixel circuitry, such as pixel-level amplifiers, that will lead to further significant improvements in imager performance. PMID:19673228

rs4889 polymorphism in KISS1 gene, its effect on polycystic ovary syndrome development and anthropometric and hormonal parameters in Saudi women.

PubMed

Albalawi, Fadwa S; Daghestani, Maha H; Daghestani, Mazin H; Eldali, Abdelmoneim; Warsy, Arjumand S

2018-05-30

Kisspeptin is involved in female reproduction. This study was designed to i- estimate kisspeptin levels in women with polycystic ovary syndrome (PCOS), in comparison with controls, ii- study the correlations between kisspeptin and PCOS-related reproductive hormones, and iii- investigate the relation between KISS1 gene polymorphisms and hormone levels in women suffering from PCOS. The investigation was a clinically designed study on 28 women with PCOS, and 30 normal, healthy women with no signs of PCOS as controls. Blood samples were collected between day 3 and day 6 of the menstrual cycle in both groups at 8:00 a.m., and circulating levels of LH, FSH and kisspeptin were estimated. DNA was extracted from whole blood and all coding exons of KISS1 gene were sequenced. Women with PCOS had higher LH levels and BMI compared to controls. Plasma kisspeptin levels were positively correlated with LH levels. There was no statistically significant difference between the groups in terms of kisspeptin and FSH levels. The SNP rs4889 C/G, a non-synonymous SNP, was investigated in the PCOS group. The frequency of GG genotype was significantly higher in the PCOS compared to the controls. These patients were more obese, had higher kisspeptin and FSH levels. The results of the study show that the genetic variation of KISS1 gene may be a factor contributing to PCOS development. The association between the gene and the gene variation and PCOS need further validation in large-scaled and functional studies.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 7: System/subsystem requirements data book

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1979-01-01

Volume 7 of the Satellite Power Systems (SPS) Concept Definition Study final report summarizes the basic requirements used as a guide to systems analysis and is a basis for the selection of candidate SPS point design(s). Initially, these collected data reflected the level of definition resulting from the evaluation of a broad spectrum of SPS concepts. As the various concepts matured these requirements were updated to reflect the requirements identified for the projected satellite system/subsystem point design(s). The identified subsystem/systems requirements are defined, and where appropriate, recommendations for alternate approaches which may represent improved design features are presented. A more detailed discussion of the selected point design(s) will be found in Volume 2 of this report.

Design-with-Nature for Multifunctional Landscapes: Environmental Benefits and Social Barriers in Community Development

PubMed Central

Yang, Bo; Li, Ming-Han; Li, Shujuan

2013-01-01

Since the early 1970s, Ian McHarg’s design-with-nature concept has been inspiring landscape architects, community and regional planners, and liked-minded professionals to create designs that take advantage of ecosystem services and promote environmental and public health. This study bridges the gap in the literature that has resulted from a lack of empirical examinations on the multiple performance benefits derived through design-with-nature and the under-investigated social aspect emanated from McHarg’s Ecological Determinism design approach. The Woodlands, TX, USA, an ecologically designed community development under McHarg’s approach, is compared with two adjacent communities that follow the conventional design approach. Using national environmental databases and multiple-year residents’ survey information, this study assesses three landscape performance metrics of McHarg’s approach: stormwater runoff, urban heat island effect, and social acceptance. Geographic Information Systems (GIS) was used to assess the development extent and land surface temperature distribution. Results show that McHarg’s approach demonstrates benefits in reducing runoff and urban heat island effect, whereas it confronts challenges with the general acceptance of manicured landscapes and thus results in a low safety perception level when residents interact with naturally designed landscapes. The authors argue that design-with-nature warrants multifunctionality because of its intrinsic interdisciplinary approach. Moreover, education and dissemination of successful examples can achieve a greater level of awareness among the public and further promote multifunctional design for landscape sustainability. PMID:24169408

Design-with-nature for multifunctional landscapes: environmental benefits and social barriers in community development.

PubMed

Yang, Bo; Li, Ming-Han; Li, Shujuan

2013-10-28

Since the early 1970s, Ian McHarg's design-with-nature concept has been inspiring landscape architects, community and regional planners, and liked-minded professionals to create designs that take advantage of ecosystem services and promote environmental and public health. This study bridges the gap in the literature that has resulted from a lack of empirical examinations on the multiple performance benefits derived through design-with-nature and the under-investigated social aspect emanated from McHarg's Ecological Determinism design approach. The Woodlands, TX, USA, an ecologically designed community development under McHarg's approach, is compared with two adjacent communities that follow the conventional design approach. Using national environmental databases and multiple-year residents' survey information, this study assesses three landscape performance metrics of McHarg's approach: stormwater runoff, urban heat island effect, and social acceptance. Geographic Information Systems (GIS) was used to assess the development extent and land surface temperature distribution. Results show that McHarg's approach demonstrates benefits in reducing runoff and urban heat island effect, whereas it confronts challenges with the general acceptance of manicured landscapes and thus results in a low safety perception level when residents interact with naturally designed landscapes. The authors argue that design-with-nature warrants multifunctionality because of its intrinsic interdisciplinary approach. Moreover, education and dissemination of successful examples can achieve a greater level of awareness among the public and further promote multifunctional design for landscape sustainability.

Analytical trade study of the STS payload environment. [design analysis and cost estimates for noise reduction devices for space shuttle orbiter payloads

NASA Technical Reports Server (NTRS)

Rader, W. P.; Barrett, S.; Raratono, J.; Payne, K. R.

1976-01-01

The current predicted acoustic environment for the shuttle orbiter payload bay will produce random vibration environments for payload components and subsystems which potentially will result in design, weight and cost penalties if means of protecting the payloads are not developed. Results are presented of a study to develop, through design and cost effectiveness trade studies, conceptual noise suppression device designs for space shuttle payloads. The impact of noise suppression on environmental levels and associated test costs, and on test philosophy for the various payload classes is considered with the ultimate goal of reducing payload test costs. Conclusions and recommendations are presented.

Design, innovation, and rural creative places: Are the arts the cherry on top, or the secret sauce?

PubMed

Wojan, Timothy R; Nichols, Bonnie

2018-01-01

Creative class theory explains the positive relationship between the arts and commercial innovation as the mutual attraction of artists and other creative workers by an unobserved creative milieu. This study explores alternative theories for rural settings, by analyzing establishment-level survey data combined with data on the local arts scene. The study identifies the local contextual factors associated with a strong design orientation, and estimates the impact that a strong design orientation has on the local economy. Data on innovation and design come from a nationally representative sample of establishments in tradable industries. Latent class analysis allows identifying unobserved subpopulations comprised of establishments with different design and innovation orientations. Logistic regression allows estimating the association between an establishment's design orientation and local contextual factors. A quantile instrumental variable regression allows assessing the robustness of the logistic regression results with respect to endogeneity. An estimate of design orientation at the local level derived from the survey is used to examine variation in economic performance during the period of recovery from the Great Recession (2010-2014). Three distinct innovation (substantive, nominal, and non-innovators) and design orientations (design-integrated, "design last finish," and no systematic approach to design) are identified. Innovation- and design-intensive establishments were identified in both rural and urban areas. Rural design-integrated establishments tended to locate in counties with more highly educated workforces and containing at least one performing arts organization. A quantile instrumental variable regression confirmed that the logistic regression result is robust to endogeneity concerns. Finally, rural areas characterized by design-integrated establishments experienced faster growth in wages relative to rural areas characterized by establishments using no systematic approach to design.

Design, innovation, and rural creative places: Are the arts the cherry on top, or the secret sauce?

PubMed Central

Nichols, Bonnie

2018-01-01

Objective Creative class theory explains the positive relationship between the arts and commercial innovation as the mutual attraction of artists and other creative workers by an unobserved creative milieu. This study explores alternative theories for rural settings, by analyzing establishment-level survey data combined with data on the local arts scene. The study identifies the local contextual factors associated with a strong design orientation, and estimates the impact that a strong design orientation has on the local economy. Method Data on innovation and design come from a nationally representative sample of establishments in tradable industries. Latent class analysis allows identifying unobserved subpopulations comprised of establishments with different design and innovation orientations. Logistic regression allows estimating the association between an establishment’s design orientation and local contextual factors. A quantile instrumental variable regression allows assessing the robustness of the logistic regression results with respect to endogeneity. An estimate of design orientation at the local level derived from the survey is used to examine variation in economic performance during the period of recovery from the Great Recession (2010–2014). Results Three distinct innovation (substantive, nominal, and non-innovators) and design orientations (design-integrated, “design last finish,” and no systematic approach to design) are identified. Innovation- and design-intensive establishments were identified in both rural and urban areas. Rural design-integrated establishments tended to locate in counties with more highly educated workforces and containing at least one performing arts organization. A quantile instrumental variable regression confirmed that the logistic regression result is robust to endogeneity concerns. Finally, rural areas characterized by design-integrated establishments experienced faster growth in wages relative to rural areas characterized by establishments using no systematic approach to design. PMID:29489884

Study of structural design concepts for an arrow wing supersonic transport configuration, volume 1. Tasks 1 and 2

NASA Technical Reports Server (NTRS)

1976-01-01

A structural design study was made, based on a 1975 level of technology, to assess the relative merits of structural concepts and materials for an advanced supersonic transport cruising at Mach 2.7. Preliminary studies were made to insure compliance of the configuration with general design criteria, to integrate the propulsion system with the airframe, to select structural concepts and materials, and to define an efficient structural arrangement. An advanced computerized structural design system was used, in conjunction with a relatively large, complex finite element model, for detailed analysis and sizing of structural members to satisfy strength and flutter criteria. A baseline aircraft design was developed for assessment of current technology and for use in future studies of aerostructural trades, and application of advanced technology. Criteria, analysis methods, and results are presented.

Miniaturized Water Flow and Level Monitoring System for Flood Disaster Early Warning

NASA Astrophysics Data System (ADS)

Ifedapo Abdullahi, Salami; Hadi Habaebi, Mohamed; Surya Gunawan, Teddy; Rafiqul Islam, MD

2017-11-01

This study presents the performance of a prototype miniaturised water flow and water level monitoring sensor designed towards supporting flood disaster early warning systems. The design involved selection of sensors, coding to control the system mechanism, and automatic data logging and storage. During the design phase, the apparatus was constructed where all the components were assembled using locally sourced items. Subsequently, under controlled laboratory environment, the system was tested by running water through the inlet during which the flow rate and rising water levels are automatically recorded and stored in a database via Microsoft Excel using Coolterm software. The system is simulated such that the water level readings measured in centimeters is output in meters using a multiplicative of 10. A total number of 80 readings were analyzed to evaluate the performance of the system. The result shows that the system is sensitive to water level rise and yielded accurate measurement of water level. But, the flow rate fluctuates due to the manual water supply that produced inconsistent flow. It was also observed that the flow sensor has a duty cycle of 50% of operating time under normal condition which implies that the performance of the flow sensor is optimal.

Analog design optimization methodology for ultralow-power circuits using intuitive inversion-level and saturation-level parameters

NASA Astrophysics Data System (ADS)

Eimori, Takahisa; Anami, Kenji; Yoshimatsu, Norifumi; Hasebe, Tetsuya; Murakami, Kazuaki

2014-01-01

A comprehensive design optimization methodology using intuitive nondimensional parameters of inversion-level and saturation-level is proposed, especially for ultralow-power, low-voltage, and high-performance analog circuits with mixed strong, moderate, and weak inversion metal-oxide-semiconductor transistor (MOST) operations. This methodology is based on the synthesized charge-based MOST model composed of Enz-Krummenacher-Vittoz (EKV) basic concepts and advanced-compact-model (ACM) physics-based equations. The key concept of this methodology is that all circuit and system characteristics are described as some multivariate functions of inversion-level parameters, where the inversion level is used as an independent variable representative of each MOST. The analog circuit design starts from the first step of inversion-level design using universal characteristics expressed by circuit currents and inversion-level parameters without process-dependent parameters, followed by the second step of foundry-process-dependent design and the last step of verification using saturation-level criteria. This methodology also paves the way to an intuitive and comprehensive design approach for many kinds of analog circuit specifications by optimization using inversion-level log-scale diagrams and saturation-level criteria. In this paper, we introduce an example of our design methodology for a two-stage Miller amplifier.

The Effect of Trauma Center Designation and Trauma Volume on Outcome in Specific Severe Injuries

PubMed Central

Demetriades, Demetrios; Martin, Mathew; Salim, Ali; Rhee, Peter; Brown, Carlos; Chan, Linda

2005-01-01

Objective: The objective of this study was to investigate the effect of American College of Surgeons (ACS) trauma center designation and trauma volume on outcome in patients with specific severe injuries. Background: Trauma centers are designated by the ACS into different levels on the basis of resources, trauma volume, and educational and research commitment. The criteria for trauma center designation are arbitrary and have never been validated. Methods: The National Trauma Data Bank study, which included patients >14 years of age and had injury severity score (ISS) >15, were alive on admission and had at least one of the following severe injuries: aortic, vena cava, iliac vessels, cardiac, grade IV/V liver injuries, quadriplegia, or complex pelvic fractures. Outcomes (mortality, intensive care unit stay, and severe disability at discharge) were compared among level I and II trauma centers and between centers within the same level designation but different volumes of severe trauma (<240 vs ≥240 trauma admissions with ISS >15 per year). The outcomes were adjusted for age (<65 ≥65), gender, mechanism of injury, hypotension on admission, and ISS (≤25 and >25). Results: A total of 12,254 patients met the inclusion criteria. Overall, level I centers had significantly lower mortality (25.3% vs 29.3%; adjusted odds ratio [OR], 0.81; 95% confidence interval [CI], 0.71–0.94; P = 0.004) and significantly lower severe disability at discharge (20.3% vs 33.8%, adjusted OR, 0.55; 95% CI, 0.44–0.69; P < 0.001) than level II centers. Subgroup analysis showed that cardiovascular injuries (N = 2004) and grades IV–V liver injuries (N = 1415) had a significantly better survival in level I than level II trauma centers (adjusted P = 0.017 and 0.023, respectively). Overall, there was a significantly better functional outcome in level I centers (adjusted P < 0.001). Subgroup analysis showed level I centers had significantly better functional outcomes in complex pelvic fractures (P < 0.001) and a trend toward better outcomes in the rest of the subgroups. The volume of trauma admissions with ISS >15 (<240 vs ≥240 cases per year) had no effect on outcome in either level I or II centers. Conclusions: Level I trauma centers have better outcomes than lower-level centers in patients with specific injuries associated with high mortality and poor functional outcomes. The volume of major trauma admissions does not influence outcome in either level I or II centers. These findings may have significant implications in the planning of trauma systems and the billing of services according to level of accreditation. PMID:16192811

Design, methods, and participant characteristics of the Impact of Personal Genomics (PGen) Study, a prospective cohort study of direct-to-consumer personal genomic testing customers.

PubMed

Carere, Deanna Alexis; Couper, Mick P; Crawford, Scott D; Kalia, Sarah S; Duggan, Jake R; Moreno, Tanya A; Mountain, Joanna L; Roberts, J Scott; Green, Robert C

2014-01-01

Designed in collaboration with 23andMe and Pathway Genomics, the Impact of Personal Genomics (PGen) Study serves as a model for academic-industry partnership and provides a longitudinal dataset for studying psychosocial, behavioral, and health outcomes related to direct-to-consumer personal genomic testing (PGT). Web-based surveys administered at three time points, and linked to individual-level PGT results, provide data on 1,464 PGT customers, of which 71% completed each follow-up survey and 64% completed all three surveys. The cohort includes 15.7% individuals of non-white ethnicity, and encompasses a range of income, education, and health levels. Over 90% of participants agreed to re-contact for future research.

75 FR 65551 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-25

... at a $3.00 PFC Level: New terminal development schematic preliminary engineering study and design... for Collection and Use: Air carrier apron. Pavement condition inventory. New terminal building... construction. De-icing treatment plant. Domestic water service. CTX design and installation. Landside planning...

Integrating Engineering Design into Technology Education: Georgia's Perspective

ERIC Educational Resources Information Center

Denson, Cameron D.; Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

This descriptive research study reported on Georgia's secondary level (grades 6-12) technology education programs capability to incorporate engineering concepts and/or engineering design into their curriculum. Participants were middle school and high school teachers in the state of Georgia who currently teach technology education. Participants…

SCALS: a fourth-generation study of assisted living technologies in their organisational, social, political and policy context.

PubMed

Greenhalgh, Trisha; Shaw, Sara; Wherton, Joe; Hughes, Gemma; Lynch, Jenni; A'Court, Christine; Hinder, Sue; Fahy, Nick; Byrne, Emma; Finlayson, Alexander; Sorell, Tom; Procter, Rob; Stones, Rob

2016-02-15

Research to date into assisted living technologies broadly consists of 3 generations: technical design, experimental trials and qualitative studies of the patient experience. We describe a fourth-generation paradigm: studies of assisted living technologies in their organisational, social, political and policy context. Fourth-generation studies are necessarily organic and emergent; they view technology as part of a dynamic, networked and potentially unstable system. They use co-design methods to generate and stabilise local solutions, taking account of context. SCALS (Studies in Co-creating Assisted Living Solutions) consists (currently) of 5 organisational case studies, each an English health or social care organisation striving to introduce technology-supported services to support independent living in people with health and/or social care needs. Treating these cases as complex systems, we seek to explore interdependencies, emergence and conflict. We employ a co-design approach informed by the principles of action research to help participating organisations establish, refine and evaluate their service. To that end, we are conducting in-depth ethnographic studies of people's experience of assisted living technologies (micro level), embedded in evolving organisational case studies that use interviews, ethnography and document analysis (meso level), and exploring the wider national and international context for assisted living technologies and policy (macro level). Data will be analysed using a sociotechnical framework developed from structuration theory. Research ethics approval for the first 4 case studies has been granted. An important outcome will be lessons learned from individual co-design case studies. We will document the studies' credibility and rigour, and assess the transferability of findings to other settings while also recognising unique aspects of the contexts in which they were generated. Academic outputs will include a cross-case analysis and progress in theory and method of fourth-generation assisted living technology research. We will produce practical guidance for organisations, policymakers, designers and service users. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students' Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

ERIC Educational Resources Information Center

Karakis, Hilal; Karamete, Aysen; Okçu, Aydin

2016-01-01

This study examined the effects that computer-assisted instruction had on students' attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach…

Implementation of "Quality by Design (QbD)" Approach for the Development of 5-Fluorouracil Loaded Thermosensitive Hydrogel.

PubMed

Dalwadi, Chintan; Patel, Gayatri

2016-01-01

The purpose of this study was to investigate Quality by Design (QbD) principle for the preparation of hydrogel products to prove both practicability and utility of executing QbD concept to hydrogel based controlled release systems. Product and process understanding will help in decreasing the variability of critical material and process parameters, which give quality product output and reduce the risk. This study includes the identification of the Quality Target Product Profiles (QTPPs) and Critical Quality Attributes (CQAs) from literature or preliminary studies. To identify and control the variability in process and material attributes, two tools of QbD was utilized, Quality Risk Management (QRM) and Experimental Design. Further, it helps to identify the effect of these attributes on CQAs. Potential risk factors were identified from fishbone diagram and screened by risk assessment and optimized by 3-level 2- factor experimental design with center points in triplicate, to analyze the precision of the target process. This optimized formulation was further characterized by gelling time, gelling temperature, rheological parameters, in-vitro biodegradation and in-vitro drug release. Design space was created using experimental design tool that gives the control space and working within this controlled space reduces all the failure modes below the risk level. In conclusion, QbD approach with QRM tool provides potent and effectual pyramid to enhance the quality into the hydrogel.

Internal Structural Design of the Common Research Model Wing Box for Aeroelastic Tailoring

NASA Technical Reports Server (NTRS)

Jutte, Christine V.; Stanford, Bret K.; Wieseman, Carol D.

2015-01-01

This work explores the use of alternative internal structural designs within a full-scale wing box structure for aeroelastic tailoring, with a focus on curvilinear spars, ribs, and stringers. The baseline wing model is a fully-populated, cantilevered wing box structure of the Common Research Model (CRM). Metrics of interest include the wing weight, the onset of dynamic flutter, and the static aeroelastic stresses. Twelve parametric studies alter the number of internal structural members along with their location, orientation, and curvature. Additional evaluation metrics are considered to identify design trends that lead to lighter-weight, aeroelastically stable wing designs. The best designs of the individual studies are compared and discussed, with a focus on weight reduction and flutter resistance. The largest weight reductions were obtained by removing the inner spar, and performance was maintained by shifting stringers forward and/or using curvilinear ribs: 5.6% weight reduction, a 13.9% improvement in flutter speed, but a 3.0% increase in stress levels. Flutter resistance was also maintained using straight-rotated ribs although the design had a 4.2% lower flutter speed than the curved ribs of similar weight and stress levels were higher. For some configurations, the differences between curved and straight ribs were smaller, which provides motivation for future optimization-based studies to fully exploit the trade-offs.

The reduction of intoxication and disorder in premises licensed to serve alcohol: An exploratory randomised controlled trial

PubMed Central

2010-01-01

Background Licensed premises offer a valuable point of intervention to reduce alcohol-related harm. Objective To describe the research design for an exploratory trial examining the feasibility and acceptability of a premises-level intervention designed to reduce severe intoxication and related disorder. The study also aims to assess the feasibility of a potential future large scale effectiveness trial and provide information on key trial design parameters including inclusion criteria, premises recruitment methods, strategies to implement the intervention and trial design, outcome measures, data collection methods and intra-cluster correlations. Design A randomised controlled trial in licensed premises that had experienced at least one assault in the year preceding the intervention, documented in police or hospital Emergency Department (ED) records. Premises were recruited from four study areas by piloting four recruitment strategies of varying intensity. Thirty two licensed premises were grouped into matched pairs to reduce potential bias and randomly allocated to the control or intervention condition. The study included a nested process evaluation to provide information on intervention acceptability and implementation. Outcome measures included police-recorded violent incidents, assault-related attendances at each premises' local ED and patron Breath Alcohol Concentration assessed on exiting and entering study premises. Results The most successful recruitment method involved local police licensing officers and yielded a 100% success rate. Police-records of violence provided the most appropriate source of data about disorder at the premises level. Conclusion The methodology of an exploratory trial is presented and despite challenges presented by the study environment it is argued an exploratory trial is warranted. Initial investigations in recruitment methods suggest that study premises should be recruited with the assistance of police officers. Police data were of sufficient quality to identify disorder and street surveys are a feasible method for measuring intoxication at the individual level. Trial registration UKCRN 7090; ISRCTN: 80875696 Funding Medical Research Council (G0701758) to Simon Moore, Simon Murphy, Laurence Moore and Jonathan Shepherd PMID:20946634

Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study: research design and methodology.

PubMed

Badland, Hannah M; Schofield, Grant M; Witten, Karen; Schluter, Philip J; Mavoa, Suzanne; Kearns, Robin A; Hinckson, Erica A; Oliver, Melody; Kaiwai, Hector; Jensen, Victoria G; Ergler, Christina; McGrath, Leslie; McPhee, Julia

2009-07-10

Built environment attributes are recognized as being important contributors to physical activity (PA) engagement and body size in adults and children. However, much of the existing research in this emergent public health field is hindered by methodological limitations, including: population and site homogeneity, reliance on self-report measures, aggregated measures of PA, and inadequate statistical modeling. As an integral component of multi-country collaborative research, the Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study seeks to overcome these limitations by determining the strengths of association between detailed measures of the neighborhood built environment with PA levels across multiple domains and body size measures in adults and children. This article outlines the research protocol developed for the URBAN Study. The URBAN Study is a multi-centered, stratified, cross-sectional research design, collecting data across four New Zealand cities. Within each city, 12 neighborhoods were identified and selected for investigation based on higher or lower walkability and Māori demographic attributes. Neighborhoods were selected to ensure equal representation of these characteristics. Within each selected neighborhood, 42 households are being randomly selected and an adult and child (where possible) recruited into the study. Data collection includes: objective and self-reported PA engagement, neighborhood perceptions, demographics, and body size measures. The study was designed to recruit approximately 2,000 adults and 250 children into the project. Other aspects of the study include photovoice, which is a qualitative assessment of built environment features associated with PA engagement, an audit of the neighborhood streetscape environment, and an individualized neighborhood walkability profile centered on each participant's residential address. Multilevel modeling will be used to examine the individual-level and neighborhood-level relationships with PA engagement and body size. The URBAN Study is applying a novel scientifically robust research design to provide urgently needed epidemiological information regarding the associations between the built environment and health outcomes. The findings will contribute to a larger, international initiative in which similar neighborhood selection and PA measurement procedures are utilized across eight countries. Accordingly, this study directly addresses the international priority issues of increasing PA engagement and decreasing obesity levels.

The Neighbourhood Effects on Health and Well-being (NEHW) study.

PubMed

O'Campo, Patricia; Wheaton, Blair; Nisenbaum, Rosane; Glazier, Richard H; Dunn, James R; Chambers, Catharine

2015-01-01

Many cross-sectional studies of neighbourhood effects on health do not employ strong study design elements. The Neighbourhood Effects on Health and Well-being (NEHW) study, a random sample of 2412 English-speaking Toronto residents (age 25-64), utilises strong design features for sampling neighbourhoods and individuals, characterising neighbourhoods using a variety of data sources, measuring a wide range of health outcomes, and for analysing cross-level interactions. We describe here methodological issues that shaped the design and analysis features of the NEHW study to ensure that, while a cross-sectional sample, it will advance the quality of evidence emerging from observational studies. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Exploring the Relationship between Absolute and Relative Position and Late-Life Depression: Evidence from 10 European Countries

ERIC Educational Resources Information Center

Ladin, Keren; Daniels, Norman; Kawachi, Ichiro

2010-01-01

Purpose: Socioeconomic inequality has been associated with higher levels of morbidity and mortality. This study explores the role of absolute and relative deprivation in predicting late-life depression on both individual and country levels. Design and Methods: Country- and individual-level inequality indicators were used in multivariate logistic…

Joint Services Electronics Program.

DTIC Science & Technology

1983-09-30

environment. The research is under three interrelated heads: (1) algebraic Methodologies for Control Systems design , both linear and non -linear, (2) robust...properties of the device. After study of these experimental results, we plan to design a millimeter- wave version of the Gunn device. This will...appropriate dose discretization level for an adju- stable width beam. 2) Experimental Device Fabrication In a collaborative effort with the IC design group

Assessing the Effectiveness of a Learning Community Course Design to Improve the Math Performance of First-Year Students

ERIC Educational Resources Information Center

Hansen, Michele J.; Meshulam, Susan; Parker, Brooke

2013-01-01

National attention is focused on the persistent high failure rates for students enrolled in math courses, and the search for strategies to change these outcomes is on. This study used a mixed-method research design to assess the effectiveness of a learning community course designed to improve the math performance levels of firstyear students.…

Factor levels for density comparisons in the split-block spacing design

Treesearch

Kurt H. Riitters; Brian J. Stanton; Robbert H. Walkup

1989-01-01

The split-block spacing design is a compact test of the effects of within-row and between-row spacings. But the sometimes awkward analysis of density (i.e., trees/ha) effects may deter use of the design. The analysis is simpler if the row spacings are chosen to obtain a balanced set of equally spaced density and rectangularity treatments. A spacing study in poplar (...

Modeling and Recovery of Iron (Fe) from Red Mud by Coal Reduction

NASA Astrophysics Data System (ADS)

Zhao, Xiancong; Li, Hongxu; Wang, Lei; Zhang, Lifeng

Recovery of Fe from red mud has been studied using statistically designed experiments. The effects of three factors, namely: reduction temperature, reduction time and proportion of additive on recovery of Fe have been investigated. Experiments have been carried out using orthogonal central composite design and factorial design methods. A model has been obtained through variance analysis at 92.5% confidence level.

Can Research Design Explain Variation in Head Start Research Results? A Meta-Analysis of Cognitive and Achievement Outcomes

ERIC Educational Resources Information Center

Shager, Hilary M.; Schindler, Holly S.; Magnuson, Katherine A.; Duncan, Greg J.; Yoshikawa, Hirokazu; Hart, Cassandra M. D.

2013-01-01

This study explores the extent to which differences in research design explain variation in Head Start program impacts. We employ meta-analytic techniques to predict effect sizes for cognitive and achievement outcomes as a function of the type and rigor of research design, quality and type of outcome measure, activity level of control group, and…

Revolutionary Concepts for Helicopter Noise Reduction: SILENT Program

NASA Technical Reports Server (NTRS)

Edwards, Bryan; Cox, Charles; Booth, Earl R., Jr. (Technical Monitor)

2002-01-01

As part of a NASA initiative to reduce helicopter main rotor noise, a Phase 1 study has been performed of candidate noise reduction concepts. Both conventional and novel design technologies have been analyzed that reduce the community impact of helicopter operations. In this study the noise reduction potential and design implications are assessed for conventional means of noise reduction, e.g., tip speed reduction, tip shapes and airfoil tailoring, and for two innovative design concepts: modulated blade spacing and x-force control. Main rotor designs that incorporate modulated blade spacing are shown to have reduced peak noise levels in most flight operations. X-force control alters the helicopter's force balance whereby the miss distance between main rotor blades and shed vortices can be controlled. This control provides a high potential to mitigate BVI noise radiation. Each concept is evaluated using best practice design and analysis methods, achieving the study's aim to significantly reduce noise with minimal performance degradation and no vibration increase. It is concluded that a SILENT main rotor design, incorporating the modulated blade spacing concept, offers significantly reduced noise levels and the potential of a breakthrough in how a helicopter's sound is perceived and judged. The SILENT rotor represents a definite advancement in the state-of-the-art and is selected as the design concept for demonstration in Phase 2. A Phase 2 Implementation Plan is developed for whirl cage and wind tunnel evaluations of a scaled model SILENT rotor.

Design of a workstation and its evaluation under the influence of noise and illumination for an assembly task.

PubMed

Muzammil, Mohammad; Ahmad, Saman; Khan, Abid Ali; Hasan, Faisal

2011-01-01

An experimental research was conducted to design a workstation for a lock manufacturing assembly. Two experiments were conducted in the present study. Nine male subjects in the age range of 18-35 years participated in the first experiment. For the second experiment, nine subjects in each of the three age groups (viz. 17-22, 23-28 and 29-35 years) volunteered for experimental investigations. The designed workstation was evaluated under varying levels of noise and illumination for workers of different age groups. Three different workstations were evaluated. The task was performed by a worker in two different sitting positions and three settings of arms position. It was found that workstation type, backrest support and arms positions were all having a statistically significant effect on task performance. Workstation with work surface to seat height ratio of 1.82 was found to be better when the task was performed using backrest and arms were supported on the work surface. This workstation was evaluated for three different age groups of workers under different levels of noise and illumination. The results of the study showed that age of the worker, illumination level and level of noise were all contributing significantly towards task performance. The design of a workstation for assembly task would help greatly in creating a better working environment and enhancing the productivity of workers exposed to environmental stressors like noise and illumination. © 2011 - IOS Press and the authors. All rights reserved

Data on Enacted Curriculum Study: Summary of Findings Experimental Design Study of Effectiveness of DEC Professional Development Model in Urban Middle Schools

ERIC Educational Resources Information Center

Blank, Rolf K.

2004-01-01

The purpose of the three-year CCSSO study was to design, implement, and test the effectiveness of the Data on Enacted Curriculum (DEC) model for improving math and science instruction. The model was tested by measuring its effects with a randomly selected sample of ?treatment? schools at the middle grades level as compared to a control group of…

Analysis on Flexural Strength of A36 Mild Steel by Design of Experiment (DOE)

NASA Astrophysics Data System (ADS)

Nurulhuda, A.; Hafizzal, Y.; Izzuddin, MZM; Sulawati, MRN; Rafidah, A.; Suhaila, Y.; Fauziah, AR

2017-08-01

Nowadays demand for high quality and reliable components and materials are increasing so flexural tests have become vital test method in both the research and manufacturing process and development to explain in details about the material’s ability to withstand deformation under load. Recently, there are lack research studies on the effect of thickness, welding type and joint design on the flexural condition by DOE approach method. Therefore, this research will come out with the flexural strength of mild steel since it is not well documented. By using Design of Experiment (DOE), a full factorial design with two replications has been used to study the effects of important parameters which are welding type, thickness and joint design. The measurement of output response is identified as flexural strength value. Randomize experiments was conducted based on table generated via Minitab software. A normal probability test was carried out using Anderson Darling Test and show that the P-value is <0.005. Thus, the data is not normal since there is significance different between the actual data with the ideal data. Referring to the ANOVA, only factor joint design is significant since the P-value is less than 0.05. From the main plot and interaction plot, the recommended setting for each of parameters were suggested as high level for welding type, high level for thickness and low level for joint design. The prediction model was developed thru regression in order to measure effect of output response for any changes on parameters setting. In the future, the experiments can be enhanced using Taguchi methods in order to do verification of result.

Configuration study for a 30 GHz monolithic receive array, volume 1

NASA Technical Reports Server (NTRS)

Nester, W. H.; Cleaveland, B.; Edward, B.; Gotkis, S.; Hesserbacker, G.; Loh, J.; Mitchell, B.

1984-01-01

Gregorian, Cassegrain, and single reflector systems were analyzed in configuration studies for communications satellite receive antennas. Parametric design and performance curves were generated. A preliminary design of each reflector/feed system was derived including radiating elements, beam-former network, beamsteering system, and MMIC module architecture. Performance estimates and component requirements were developed for each design. A recommended design was selected for both the scanning beam and the fixed beam case. Detailed design and performance analysis results are presented for the selected Cassegrain configurations. The final design point is characterized in detail and performance measures evaluated in terms of gain, sidelobe level, noise figure, carrier-to-interference ratio, prime power, and beamsteering. The effects of mutual coupling and excitation errors (including phase and amplitude quantization errors) are evaluated. Mechanical assembly drawings are given for the final design point. Thermal design requirements are addressed in the mechanical design.

Commentary: How can family-based quasi-experimental designs and national registers be used to address confounding in risk factor studies of psychopathology? A reflection on Obel et al. (2016).

PubMed

Larsson, Henrik

2016-04-01

Standard observational studies have reported a robust correlation between maternal smoking during pregnancy and risk of ADHD in offspring. In the accompanying article, Obel et al. used sibling-comparisons to explore the extent to which unmeasured familial confounding explains this association. This commentary highlights three important implications of the study. At a general level, Obel et al. illustrates how (1) family-based quasi-experimental designs and (2) national registers can be used to address confounding in risk factor studies of psychopathology. At a more specific level, the study suggests that maternal smoking during pregnancy is probably not a causal risk factor for ADHD. © 2016 Association for Child and Adolescent Mental Health.

The Integrated Mission Design Center (IMDC) at NASA Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Karpati, Gabriel; Martin, John; Steiner, Mark; Reinhardt, K.

2002-01-01

NASA Goddard has used its Integrated Mission Design Center (IMDC) to perform more than 150 mission concept studies. The IMDC performs rapid development of high-level, end-to-end mission concepts, typically in just 4 days. The approach to the studies varies, depending on whether the proposed mission is near-future using existing technology, mid-future using new technology being actively developed, or far-future using technology which may not yet be clearly defined. The emphasis and level of detail developed during any particular study depends on which timeframe (near-, mid-, or far-future) is involved and the specific needs of the study client. The most effective mission studies are those where mission capabilities required and emerging technology developments can synergistically work together; thus both enhancing mission capabilities and providing impetus for ongoing technology development.

Operationalizing System Importance Measures for Assessing System of System Resilience

NASA Astrophysics Data System (ADS)

Chandrahasa, Rakshit

In recent times, there has been a shift in focus from component level to system level analysis and an increasing effort to understand and design resilience into the system. Several efforts have been carried out in creating metrics to analyse resilience. Understanding and implementing system resilience in complex System of Systems will help us in building safer and resilient systems. System Importance Measures (SIMs) was formulated to analyse System of System resilience and help in designing a resilient SoS. Here, we operationalize these System Importance Measures for designing a resilient SoS. We first look at the existing methodology to improve the visual representation of system resilience and its usability. We demonstrate this using our first case study with a Naval warfare SoS. We incorporate probability into the SIM formulation. We expand the existing SIMs to quantify the effects of disruptions and mitigation likelihoods. We built a second case study based on Air transportation networks and demonstrated our expanded metrics in both the case studies. SIM based analysis of SoS resilience provides us with two different analysis of resilience, with and without probability. Having an outlook on how the resilience changes with a probability of disruptions can aid the designer making informed choices on design changes and help in creating a resilient SoS.

High transonic speed transport aircraft study. [aerodynamic characteristics of single-fuselage, yawed-wing configuration

NASA Technical Reports Server (NTRS)

Kulfan, R. M.; Neumann, F. D.; Nisbet, J. W.; Mulally, A. R.; Murakami, J. K.; Noble, E. C.; Mcbarron, J. P.; Stalter, J. L.; Gimmestad, D. W.; Sussman, M. B.

1973-01-01

An initial design study of high-transonic-speed transport aircraft has been completed. Five different design concepts were developed. These included fixed swept wing, variable-sweep wing, delta wing, double-fuselage yawed-wing, and single-fuselage yawed-wing aircraft. The boomless supersonic design objectives of range=5560 Km (3000 nmi), payload-18 143 kg (40 000lb), Mach=1.2, and FAR Part 36 aircraft noise levels were achieved by the single-fuselage yawed-wing configuration with a gross weight of 211 828 Kg (467 000 lb). A noise level of 15 EPNdB below FAR Part 36 requirements was obtained with a gross weight increase to 226 796 Kg (500 000 lb). Although wing aeroelastic divergence was a primary design consideration for the yawed-wing concepts, the graphite-epoxy wings of this study were designed by critical gust and maneuver loads rather than by divergence requirements. The transonic nacelle drag is shown to be very sensitive to the nacelle installation. A six-degree-of-freedom dynamic stability analysis indicated that the control coordination and stability augmentation system would require more development than for a symmetrical airplane but is entirely feasible. A three-phase development plan is recommended to establish the full potential of the yawed-wing concept.

A direct approach for the design of chirp stimuli used for the recording of auditory brainstem responses

PubMed Central

Elberling, Claus; Don, Manuel

2010-01-01

A recent study evaluates auditory brainstem responses (ABRs) evoked by chirps of different durations (sweeping rates) [Elberling et al. (2010). J. Acoust. Soc. Am. 128, 215–223]. The study demonstrates that shorter chirps are most efficient at higher levels of stimulation whereas longer chirps are most efficient at lower levels. Mechanisms other than the traveling wave delay, in particular, upward spread of excitation and changes in cochlear-neural delay with level, are suggested to be responsible for these findings. As a consequence, delay models based on estimates of the traveling wave delay are insufficient for the design of chirp stimuli, and another delay model based on a direct approach is therefore proposed. The direct approach uses ABR-latencies from normal-hearing subjects in response to octave-band chirps over a wide range of levels. The octave-band chirps are constructed by decomposing a broad-band chirp, and constitute a subset of the chirp. The delay compensations of the proposed model are similar to those found in the previous experimental study, which thus verifies the results of the proposed model. PMID:21110591

The effect of graphical and numerical presentation of hypothetical prenatal diagnosis results on risk perception.

PubMed

Siegrist, Michael; Orlow, Pascale; Keller, Carmen

2008-01-01

To evaluate various formats for the communication of prenatal test results. In study 1 (N=400), female students completed a questionnaire assessing risk perception, affect, and perceived usefulness of prenatal test results. A randomized, 2 (risk level; low, high) x 4 (format; ratio with numerator 1, ratio with denominator 1000, Paling Perspective Scale, pictograms) design was used. Study 2 (N=200) employed a 2 (risk level; low, high) x 2 (format; Paling Perspective Scale, risk comparisons in numerical format) design. In study 1, the Paling Perspective Scale resulted in a higher level of perceived risk across different risk levels compared with the other formats. Furthermore, participants in the low-risk group perceived the test results as less risky compared with participants in the high-risk group (P < 0.001) when the Paling Perspective Scale was used. No significant differences between low and high risks were observed for the other 3 formats. In study 2, the Paling Perspective Scale evoked higher levels of perceived risks relative to the numerical presentation of risk comparisons. For both formats, we found that participants confronted with a high risk perceived test results as more risky compared with participants confronted with a low risk. The Paling Perspective Scale resulted in a higher level of perceived risk compared with the other formats. This effect must be taken into account when choosing a graphical or numerical format for risk communication.

Application of Plackett-Burman experimental design in the development of muffin using adlay flour

NASA Astrophysics Data System (ADS)

Valmorida, J. S.; Castillo-Israel, K. A. T.

2018-01-01

The application of Plackett-Burman experimental design was made to identify significant formulation and process variables in the development of muffin using adlay flour. Out of the seven screened variables, levels of sugar, levels of butter and baking temperature had the most significant influence on the product model in terms of physicochemical and sensory acceptability. Results of the experiment further demonstrate the effectiveness of Plackett-Burman design in choosing the best adlay variety for muffin production. Hence, the statistical method used in the study permits an efficient selection of important variables needed in the development of muffin from adlay which can be optimized using response surface methodology.

Numerical aerodynamic simulation facility. Preliminary study extension

NASA Technical Reports Server (NTRS)

1978-01-01

The production of an optimized design of key elements of the candidate facility was the primary objective of this report. This was accomplished by effort in the following tasks: (1) to further develop, optimize and describe the function description of the custom hardware; (2) to delineate trade off areas between performance, reliability, availability, serviceability, and programmability; (3) to develop metrics and models for validation of the candidate systems performance; (4) to conduct a functional simulation of the system design; (5) to perform a reliability analysis of the system design; and (6) to develop the software specifications to include a user level high level programming language, a correspondence between the programming language and instruction set and outline the operation system requirements.

Near Zero Energy House (NZEH) Design Optimization to Improve Life Cycle Cost Performance Using Genetic Algorithm

NASA Astrophysics Data System (ADS)

Latief, Y.; Berawi, M. A.; Koesalamwardi, A. B.; Supriadi, L. S. R.

2018-03-01

Near Zero Energy House (NZEH) is a housing building that provides energy efficiency by using renewable energy technologies and passive house design. Currently, the costs for NZEH are quite expensive due to the high costs of the equipment and materials for solar panel, insulation, fenestration and other renewable energy technology. Therefore, a study to obtain the optimum design of a NZEH is necessary. The aim of the optimum design is achieving an economical life cycle cost performance of the NZEH. One of the optimization methods that could be utilized is Genetic Algorithm. It provides the method to obtain the optimum design based on the combinations of NZEH variable designs. This paper discusses the study to identify the optimum design of a NZEH that provides an optimum life cycle cost performance using Genetic Algorithm. In this study, an experiment through extensive design simulations of a one-level house model was conducted. As a result, the study provide the optimum design from combinations of NZEH variable designs, which are building orientation, window to wall ratio, and glazing types that would maximize the energy generated by photovoltaic panel. Hence, the design would support an optimum life cycle cost performance of the house.

Centralized vs. decentralized nursing stations: effects on nurses' functional use of space and work environment.

PubMed

Zborowsky, Terri; Bunker-Hellmich, Lou; Morelli, Agneta; O'Neill, Mike

2010-01-01

Evidence-based findings of the effects of nursing station design on nurses' work environment and work behavior are essential to improve conditions and increase retention among these fundamental members of the healthcare delivery team. The purpose of this exploratory study was to investigate how nursing station design (i.e., centralized and decentralized nursing station layouts) affected nurses' use of space, patient visibility, noise levels, and perceptions of the work environment. Advances in information technology have enabled nurses to move away from traditional centralized paper-charting stations to smaller decentralized work stations and charting substations located closer to, or inside of, patient rooms. Improved understanding of the trade-offs presented by centralized and decentralized nursing station design has the potential to provide useful information for future nursing station layouts. This information will be critical for understanding the nurse environment "fit." The study used an exploratory design with both qualitative and quantitative methods. Qualitative data regarding the effects of nursing station design on nurses' health and work environment were gathered by means of focus group interviews. Quantitative data-gathering techniques included place- and person-centered space use observations, patient visibility assessments, sound level measurements, and an online questionnaire regarding perceptions of the work environment. Nurses on all units were observed most frequently performing telephone, computer, and administrative duties. Time spent using telephones, computers, and performing other administrative duties was significantly higher in the centralized nursing stations. Consultations with medical staff and social interactions were significantly less frequent in decentralized nursing stations. There were no indications that either centralized or decentralized nursing station designs resulted in superior visibility. Sound levels measured in all nursing stations exceeded recommended levels during all shifts. No significant differences were identified in nurses' perceptions of work control-demand-support in centralized and decentralized nursing station designs. The "hybrid" nursing design model in which decentralized nursing stations are coupled with centralized meeting rooms for consultation between staff members may strike a balance between the increase in computer duties and the ongoing need for communication and consultation that addresses the conflicting demands of technology and direct patient care.

Give Customers What They Meant To Ask For--Designing Training Systems at Three Levels.

ERIC Educational Resources Information Center

Hybert, Peter R.

2001-01-01

Examines instructional systems design in light of training and performance technology. Topics include the nature of design; categories of stakeholders; three levels of instructional systems design, including Curriculum Architecture Design, instructional process design, and user interface/instructional activity design; and design goals. (LRW)

Collaborative Curriculum Design to Increase Science Teaching Self-Efficacy: A Case Study

ERIC Educational Resources Information Center

Velthuis, Chantal; Fisser, Petra; Pieters, Jules

2015-01-01

The purpose of this study was to establish whether participation in a teacher design team (TDT) is an effective way to increase the science teaching self-efficacy of primary school teachers who vary in their levels of experience and interest in science. A TDT is a group of at least 2 teachers from the same or related subjects working together to…

An Evaluation of the Impact of "Learning Design" on the Distance Learning and Teaching Experience

ERIC Educational Resources Information Center

Clifton, Grace

2017-01-01

This paper evaluates the implementation of Learning Design on the production of a core FHEQ level 6 (QAA, 2008) unit of study at a UK distance learning institution. By comparing student (n = 656) and tutor (n = 42) survey data with questionnaire responses (n = 9) from the unit of study's core production team, this paper assesses the impact of…

Effects of Aquatic Intervention on Gross Motor Skills in Children with Cerebral Palsy: A Systematic Review.

PubMed

Roostaei, Meysam; Baharlouei, Hamzeh; Azadi, Hamidreza; Fragala-Pinkham, Maria A

2017-10-20

To review the literature on the effects of aquatic intervention on gross motor skills for children with cerebral palsy (CP). Six databases were searched from inception to January 2016. Aquatic studies for children aged 1-21 years with any type or CP classification and at least one outcome measuring gross motor skills were included. Information was extracted on study design, outcomes, and aquatic program type, frequency, duration, and intensity. Quality was rated using the Centre of Evidence-Based Medicine: Levels of Evidence and the PEDro scale. Of the 11 studies which met inclusion criteria, only two used randomized control trial design, and the results were mixed. Quality of evidence was rated as moderate to high for only one study. Most studies used quasi-experimental designs and reported improvements in gross motor skills for within group analyses after aquatic programs were held for two to three times per week and lasting for 6-16 weeks. Participants were classified according to the Gross Motor Function Classification System (GMFCS) levels I-V, and were aged 3-21 years. Mild to no adverse reactions were reported. Evidence on aquatic interventions for ambulatory children with CP is limited. Aquatic exercise is feasible and adverse effects are minimal; however, dosing parameters are unclear. Further research is needed to determine aquatic intervention effectiveness and exercise dosing across age categories and GMFCS levels.

Intelligent Design and educational policy: The case of Kansas

NASA Astrophysics Data System (ADS)

Jones, John Yoshito

Advocates of an alternative explanation of life's origins, Intelligent Design, have lobbied hard since the 1987 Edwards v. Aguillard decision, which banned "creation science" from public schools, to effect educational policy change through local and state-level school boards. This study examines one such lobbying effort, the 2005 attempt to modify the Kansas Curricular Standards for Science so that biological evolution is actively challenged in the classroom, by analyzing the actions and motivations of several members of the Kansas Board of Education as well as non-Board participants through personal interviews and contemporary media reports. Board minutes from 1999 to 2007 and transcripts from the Board's May, 2005, public hearings on evolution are also analyzed. This study asks, "what strategies have creationists developed in the wake of the 1987 Edwards v. Aguillard Supreme Court decision striking down creation science and how have those strategies been employed?" The question's presumption, that Intelligent Design advocates have employed new strategies to advance a creationist agenda, is validated in the study through coding the language used by the interviewees, the Board minutes, and hearings transcripts, as well as a review of contemporary media coverage. Several themes emerged: the belief of participants on each side of the debate that their opponents were attempting to oppress their views, participants on each side claiming to have the best definition of "good science," the emergence of national-level organizations such as the Discovery Institute in coordinating science-related public advocacy at the state level, evolution's importance as a state-level public policy issue, and the importance of keeping the voting public informed of science-related educational policy. This case study should be useful to state and local-level educational policymakers grappling with debates over the place of evolution in public schools.

Special aspects for forming the interiors of thai shopping malls through the use of the biological approach

NASA Astrophysics Data System (ADS)

Kuznetsova, Iryna O.; Rosliakova, Ljubov V.; Zakharchuk, Viktorija L.; Samosudova, Natalia

2017-10-01

This study reviews the biological approach to Thai shopping mall’s interior design planning. The authors defined the principles of the mall’s design optimization in Thailand on the basis of the imitation of biological samples at constructive, art-compositional, organizational and ecological levels. The analysis of forming the shopping malls interiors and space-planning solutions is based on the imitation of eight basic levels of organization of living things: molecules, cells, tissues, organs, organisms, populations, ecosystem and biosphere. The examples of the direct and implicit application of biological analogues were demonstrated in the architecture and design of Thai shopping malls. In the study, the shopping mall is regarded as an open self-sufficient system with a high level of autonomy and a fortified structural organization that includes various functional components. On the basis of the analysis of existing Thai shopping malls, a list of the basic requirements for the design of the malls was compiled. This corresponds to the needs and desires of the modern customer and ensures the competitiveness of the establishment. The phenomenon of multisensory design approach that enhances the psychophysical comfort of the shopping mall visitors is described. Socio-cultural and geographical factors were identified which determine the development of biodesign in Thailand. The article reveals the potential for a combination of biology and design to enhance the aesthetics, ergonomics and efficiency of the shopping malls. The prospects within the development of this field and the possibility of applying the solutions in practice were explored.

Analyzing Students' Learning Progressions Throughout a Teaching Sequence on Acoustic Properties of Materials with a Model-Based Inquiry Approach

NASA Astrophysics Data System (ADS)

Hernández, María Isabel; Couso, Digna; Pintó, Roser

2015-04-01

The study we have carried out aims to characterize 15- to 16-year-old students' learning progressions throughout the implementation of a teaching-learning sequence on the acoustic properties of materials. Our purpose is to better understand students' modeling processes about this topic and to identify how the instructional design and actual enactment influences students' learning progressions. This article presents the design principles which elicit the structure and types of modeling and inquiry activities designed to promote students' development of three conceptual models. Some of these activities are enhanced by the use of ICT such as sound level meters connected to data capture systems, which facilitate the measurement of the intensity level of sound emitted by a sound source and transmitted through different materials. Framing this study within the design-based research paradigm, it consists of the experimentation of the designed teaching sequence with two groups of students ( n = 29) in their science classes. The analysis of students' written productions together with classroom observations of the implementation of the teaching sequence allowed characterizing students' development of the conceptual models. Moreover, we could evidence the influence of different modeling and inquiry activities on students' development of the conceptual models, identifying those that have a major impact on students' modeling processes. Having evidenced different levels of development of each conceptual model, our results have been interpreted in terms of the attributes of each conceptual model, the distance between students' preliminary mental models and the intended conceptual models, and the instructional design and enactment.

An empirical study of statistical properties of variance partition coefficients for multi-level logistic regression models

USGS Publications Warehouse

Li, Ji; Gray, B.R.; Bates, D.M.

2008-01-01

Partitioning the variance of a response by design levels is challenging for binomial and other discrete outcomes. Goldstein (2003) proposed four definitions for variance partitioning coefficients (VPC) under a two-level logistic regression model. In this study, we explicitly derived formulae for multi-level logistic regression model and subsequently studied the distributional properties of the calculated VPCs. Using simulations and a vegetation dataset, we demonstrated associations between different VPC definitions, the importance of methods for estimating VPCs (by comparing VPC obtained using Laplace and penalized quasilikehood methods), and bivariate dependence between VPCs calculated at different levels. Such an empirical study lends an immediate support to wider applications of VPC in scientific data analysis.

Effect of diode low-level lasers on fibroblasts derived from human periodontal tissue: a systematic review of in vitro studies.

PubMed

Ren, Chong; McGrath, Colman; Jin, Lijian; Zhang, Chengfei; Yang, Yanqi

2016-09-01

This study aimed to systematically assess the parameter-specific effects of the diode low-level laser on human gingival fibroblasts (HGFs) and human periodontal ligament fibroblasts (HPDLFs). An extensive search was performed in major electronic databases including PubMed (1997), EMBASE (1947) and Web of Science (1956) and supplemented by hand search of reference lists and relevant laser journals for cell culture studies investigating the effect of diode low-level lasers on HGFs and HPDLFs published from January 1995 to December 2015. A total of 21 studies were included after screening 324 independent records, amongst which eight targeted HPDLFs and 13 focussed on HGFs. The diode low-level laser showed positive effects on promoting fibroblast proliferation and osteogenic differentiation and modulating cellular inflammation via changes in gene expression and the release of growth factors, bone-remodelling markers or inflammatory mediators in a parameter-dependent manner. Repeated irradiations with wavelengths in the red and near-infrared range and at an energy density below 16 J/cm(2) elicited favourable responses. However, considerable variations and weaknesses in the study designs and laser protocols limited the interstudy comparison and clinical transition. Current evidence showed that diode low-level lasers with adequate parameters stimulated the proliferation and modulated the inflammation of fibroblasts derived from human periodontal tissue. However, further in vitro studies with better designs and more appropriate study models and laser parameters are anticipated to provide sound evidence for clinical studies and practice.

[Use of area-level socioeconomic indicators in epidemiological research: experience in Spain and advancement opportunities].

PubMed

Domínguez-Berjón, María Felicitas; Rodríguez-Sanz, Maica; Marí-Dell'Olmo, Marc; Esnaola, Santiago; Prieto-Salceda, María Dolores; Duque, Ignacio; Rodrigo, María Pilar

2014-01-01

To determine the use of area-level socioeconomic indicators in epidemiological studies in Spain. We included studies analyzing the association of area-level socioeconomic indicators and health indicators in Spain published in peer-reviewed journals. An electronic search was conducted in PubMed-Medline, SCI-Expanded, SSCI, Embase, and the Spanish Medical Index (until December 31, 2012). A manual search was also conducted of the references of the selected studies. Each of the articles initially selected on the basis of the title and abstract was reviewed by two investigators. Information was obtained on the publication and methodology (design and study areas, information sources, health and socioeconomic indicators, and statistical analysis). We included 142 studies published since 1988 (58.4% since 2005). More than half (59.9%) were in English. The level of analysis was ecological in 73.2% and multilevel in 19.0%. The areas most frequently analyzed were census tracts (35 studies), especially within cities or autonomous regions, followed by the provinces (30 studies), mostly concerning Spain overall. The dependent variable most frequently analyzed was mortality and the socioeconomic dimension most commonly used was employment (71.1%). In the last decade in Spain, there has been an increase in the number of studies examining the association of area-level socioeconomic and health indicators, as well as in the complexity of design and analysis. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

Development and validation of a building design waste reduction model.

PubMed

Llatas, C; Osmani, M

2016-10-01

Reduction in construction waste is a pressing need in many countries. The design of building elements is considered a pivotal process to achieve waste reduction at source, which enables an informed prediction of their wastage reduction levels. However the lack of quantitative methods linking design strategies to waste reduction hinders designing out waste practice in building projects. Therefore, this paper addresses this knowledge gap through the design and validation of a Building Design Waste Reduction Strategies (Waste ReSt) model that aims to investigate the relationships between design variables and their impact on onsite waste reduction. The Waste ReSt model was validated in a real-world case study involving 20 residential buildings in Spain. The validation process comprises three stages. Firstly, design waste causes were analyzed. Secondly, design strategies were applied leading to several alternative low waste building elements. Finally, their potential source reduction levels were quantified and discussed within the context of the literature. The Waste ReSt model could serve as an instrumental tool to simulate designing out strategies in building projects. The knowledge provided by the model could help project stakeholders to better understand the correlation between the design process and waste sources and subsequently implement design practices for low-waste buildings. Copyright © 2016 Elsevier Ltd. All rights reserved.

Multi-Attribute Tradespace Exploration in Space System Design

NASA Astrophysics Data System (ADS)

Ross, A. M.; Hastings, D. E.

2002-01-01

The complexity inherent in space systems necessarily requires intense expenditures of resources both human and monetary. The high level of ambiguity present in the early design phases of these systems causes long, highly iterative, and costly design cycles. This paper looks at incorporating decision theory methods into the early design processes to streamline communication of wants and needs among stakeholders and between levels of design. Communication channeled through formal utility interviews and analysis enables engineers to better understand the key drivers for the system and allows a more thorough exploration of the design tradespace. Multi-Attribute Tradespace Exploration (MATE), an evolving process incorporating decision theory into model and simulation- based design, has been applied to several space system case studies at MIT. Preliminary results indicate that this process can improve the quality of communication to more quickly resolve project ambiguity, and enable the engineer to discover better value designs for multiple stakeholders. MATE is also being integrated into a concurrent design environment to facilitate the transfer knowledge of important drivers into higher fidelity design phases. Formal utility theory provides a mechanism to bridge the language barrier between experts of different backgrounds and differing needs (e.g. scientists, engineers, managers, etc). MATE with concurrent design couples decision makers more closely to the design, and most importantly, maintains their presence between formal reviews.

TransGuide : model deployment initiative design report

DOT National Transportation Integrated Search

1998-09-01

This report documents the high-level design of the TransGuide MDI project and discusses the design trade-off decisions. A detailed, specific project level design is provided in each projects System Design document.

Field verification of KDOT's Superpave mixture properties to be used as inputs in the NCHRP mechanistic-empirical pavement design guide.

DOT National Transportation Integrated Search

2009-01-01

In the MechanisticEmpirical Pavement Design Guide (M-EPDG), prediction of flexible pavement response and performance needs an input of dynamic modulus of hot-mix asphalt (HMA) at all three levels of hierarchical inputs. This study was intended to ...

Socialization for New and Mid-Level Community College Student Affairs Professionals

ERIC Educational Resources Information Center

Hornak, Anne M.; Ozaki, C. Carolyn; Lunceford, Christina

2016-01-01

This study was designed to explore the socialization of student affairs professionals in community colleges. The authors used the theory of organizational socialization (Van Maanen & Schein, 1979) and explored these nuances through a qualitative research design. Findings include differences in socialization in institutions versus the…

Wilson Reading System[R]. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2007

2007-01-01

Wilson Reading System[R] is a supplemental reading and writing curriculum designed to promote reading accuracy (decoding) and spelling (encoding) skills for students with word-level deficits. The program is designed to teach phonemic awareness, alphabetic principles (sound-symbol relationship), word study, spelling, sight word instruction,…

Collaboration Scripts for Enhancing Metacognitive Self-Regulation and Mathematics Literacy

ERIC Educational Resources Information Center

Chen, Cheng-Huan; Chiu, Chiung-Hui

2016-01-01

This study designed a set of computerized collaboration scripts for multi-touch supported collaborative design-based learning and evaluated its effects on multiple aspects of metacognitive self-regulation in terms of planning and controlling and mathematical literacy achievement at higher and lower levels. The computerized scripts provided a…

Designing efficient nitrous oxide sampling strategies in agroecosystems using simulation models

USDA-ARS?s Scientific Manuscript database

Cumulative nitrous oxide (N2O) emissions calculated from discrete chamber-based flux measurements have unknown uncertainty. This study used an agroecosystems simulation model to design sampling strategies that yield accurate cumulative N2O flux estimates with a known uncertainty level. Daily soil N2...

Acoustic attenuation design requirements established through EPNL parametric trades

NASA Technical Reports Server (NTRS)

Veldman, H. F.

1972-01-01

An optimization procedure for the provision of an acoustic lining configuration that is balanced with respect to engine performance losses and lining attenuation characteristics was established using a method which determined acoustic attenuation design requirements through parametric trade studies using the subjective noise unit of effective perceived noise level (EPNL).

A dynamic multi-level optimal design method with embedded finite-element modeling for power transformers

NASA Astrophysics Data System (ADS)

Zhang, Yunpeng; Ho, Siu-lau; Fu, Weinong

2018-05-01

This paper proposes a dynamic multi-level optimal design method for power transformer design optimization (TDO) problems. A response surface generated by second-order polynomial regression analysis is updated dynamically by adding more design points, which are selected by Shifted Hammersley Method (SHM) and calculated by finite-element method (FEM). The updating stops when the accuracy requirement is satisfied, and optimized solutions of the preliminary design are derived simultaneously. The optimal design level is modulated through changing the level of error tolerance. Based on the response surface of the preliminary design, a refined optimal design is added using multi-objective genetic algorithm (MOGA). The effectiveness of the proposed optimal design method is validated through a classic three-phase power TDO problem.

Preliminary evaluation of turbofan cycle parameters and acoustical suppression on the noise and direct operating cost of a commercial Mach 0.85 transport

NASA Technical Reports Server (NTRS)

Eisenberg, J. D.

1975-01-01

A study was made of the effects of turbofan cycle parameters and the use of acoustic noise suppression material to quiet 200 passenger, Mach 0.85 trijets having design ranges of 2778, 4630, and 9260 kilometers (1500, 2500, and 5000 n. mi). Aircraft gross weight and direct operating cost, which varied with amount of suppression and cycle selection, are presented as functions of both EPNdB traded and 90 EPNdB contour footprint area. Noise levels 10.9 EPNdB below FAR 36 requirements result in a 5 percent increase in DOC for an aircraft designed for a range of 9260 kilometers (5000 n. mi.). An aircraft designed for a 2778 kilometer (1500 n. mi.) range would have an EPNdB level 14 below FAR 36 for this same economic penalty. In this range of noise level, fan-machinery noise is the principal source.

Introducing WISDEM:An Integrated System Modeling for Wind Turbines and Plant (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dykes, K.; Graf, P.; Scott, G.

2015-01-01

The National Wind Technology Center wind energy systems engineering initiative has developed an analysis platform to leverage its research capabilities toward integrating wind energy engineering and cost models across wind plants. This Wind-Plant Integrated System Design & Engineering Model (WISDEM) platform captures the important interactions between various subsystems to achieve a better National Wind Technology Center wind energy systems engineering initiative has developed an analysis platform to leverage its research capabilities toward integrating wind energy engineering and cost models across wind plants. This Wind-Plant Integrated System Design & Engineering Model (WISDEM) platform captures the important interactions between various subsystems tomore » achieve a better understanding of how to improve system-level performance and achieve system-level cost reductions. This work illustrates a few case studies with WISDEM that focus on the design and analysis of wind turbines and plants at different system levels.« less

Color associations among designers and non-designers for common warning and operation concepts.

PubMed

Ng, Annie W Y; Chan, Alan H S

2018-07-01

This study examined color-concept associations among designers and non-designers with commonly used warning and operation concepts. This study required 199 designers and 175 non-designers to indicate their choice among nine colors to associate with each of the 38 concepts in a color-concept table. The results showed that the designers and non-designers had the same color associations and similar strengths of stereotypes for 17 concepts. The strongest color-concept stereotypes for both groups were red-danger, red-fire, and red-hot. However, the designers and non-designers had different color associations for the concepts of escape (green, red), increase (green, red), potential hazard (red, orange), fatal (black, red), and normal (white, green), while the strengths of the 16 remaining associations for both groups were not at equivalent levels. These findings provide ergonomists and design practitioners with a better understanding of population stereotypes for color coding, and consequently to effectively use colors in their user-centered designs. Copyright © 2018 Elsevier Ltd. All rights reserved.

People-oriented Information Visualization Design

NASA Astrophysics Data System (ADS)

Chen, Zhiyong; Zhang, Bolun

2018-04-01

In the 21st century with rapid development, in the wake of the continuous progress of science and technology, human society enters the information era and the era of big data, and the lifestyle and aesthetic system also change accordingly, so the emerging field of information visualization is increasingly popular. Information visualization design is the process of visualizing all kinds of tedious information data, so as to quickly accept information and save time-cost. Along with the development of the process of information visualization, information design, also becomes hotter and hotter, and emotional design, people-oriented design is an indispensable part of in the design of information. This paper probes information visualization design through emotional analysis of information design based on the social context of people-oriented experience from the perspective of art design. Based on the three levels of emotional information design: instinct level, behavior level and reflective level research, to explore and discuss information visualization design.

Health Insurance Benefit Design and Healthcare Utilization in Northern Rural China

PubMed Central

Wang, Hong; Liu, Yu; Zhu, Yan; Xue, Lei; Dale, Martha; Sipsma, Heather; Bradley, Elizabeth

2012-01-01

Background Poverty due to illness has become a substantial social problem in rural China since the collapse of the rural Cooperative Medical System in the early 1980s. Although the Chinese government introduced the New Rural Cooperative Medical Schemes (NRCMS) in 2003, the associations between different health insurance benefit package designs and healthcare utilization remain largely unknown. Accordingly, we sought to examine the impact of health insurance benefit design on health care utilization. Methods and Findings We conducted a cross-sectional study using data from a household survey of 15,698 members of 4,209 randomly-selected households in 7 provinces, which were representative of the provinces along the north side of the Yellow River. Interviews were conducted face-to-face and in Mandarin. Our analytic sample included 9,762 respondents from 2,642 households. In each household, respondents indicated the type of health insurance benefit that the household had (coverage for inpatient care only or coverage for both inpatient and outpatient care) and the number of outpatient visits in the 30 days preceding the interview and the number of hospitalizations in the 365 days preceding the household interview. People who had both outpatient and inpatient coverage compared with inpatient coverage only had significantly more village-level outpatient visits, township-level outpatient visits, and total outpatient visits. Furthermore, the increased utilization of township and village-level outpatient care was experienced disproportionately by people who were poorer, whereas the increased inpatient utilization overall and at the county level was experienced disproportionately by people who were richer. Conclusion The evidence from this study indicates that the design of health insurance benefits is an important policy tool that can affect the health services utilization and socioeconomic equity in service use at different levels. Without careful design, health insurance may not benefit those who are most in need of financial protection from health services expenses. PMID:23185616