Water Quality Instructional Resources Information System (IRIS). A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement XV.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement XI.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement X.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials, Supplement 26, 1986.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of governmental, private concerns, and…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials, Supplement XX (1984).

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials, Supplement 22 (1985).

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS). A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement XVII.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials, Supplement 21 (1985).

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials, Supplement 27, 1986.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials, Supplement XVIII.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Radioactive and mixed waste - risk as a basis for waste classification. Symposium proceedings No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The management of risks from radioactive and chemical materials has been a major environmental concern in the United states for the past two or three decades. Risk management of these materials encompasses the remediation of past disposal practices as well as development of appropriate strategies and controls for current and future operations. This symposium is concerned primarily with low-level radioactive wastes and mixed wastes. Individual reports were processed separately for the Department of Energy databases.

Hazardous materials safety and security technology field operational test. Volume II, evaluation final report synthesis

DOT National Transportation Integrated Search

2004-11-11

The catastrophic events of September 11, 2001 and the ongoing war on terrorism have heightened the level of concern from Federal government officials and the transportation industry regarding the secure transport of hazardous materials (HAZMAT). Secu...

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Includes May 1979 edition and Supplements 1-15.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracts/indexed materials include all levels of government, private concerns, and educational…

Thermal capacitator design rationale. Part 1: Thermal and mechanical property data for selected materials potentially useful in thermal capacitor design and construction

NASA Technical Reports Server (NTRS)

Bailey, J. A.; Liao, C. K.

1975-01-01

The thermal properties of paraffin hydrocarbons and hydrocarbon mixtures which may be used as the phase change material (PCM) in thermal capacitors are discussed. The paraffin hydrocarbons selected for consideration are those in the range from C11H24 (n-Undecane) to C20H42 (n-Eicosane). A limited amount of data is included concerning other properties of paraffin hydrocarbons and the thermal and mechanical properties of several aluminum alloys which may find application as constructional materials. Data concerning the melting temperature, transition temperature, latent heat of fusion, heat of transition, specific heat, and thermal conductivity of pure and commercial grades of paraffin hydrocarbons are given. An index of companies capable of producing paraffin hydrocarbons and information concerning the availability of various grades (purity levels) is provided.

Social capital, social class and tobacco smoking.

PubMed

Lindström, Martin

2008-02-01

In all developed and some developing countries there are socioeconomic status (SES) differences in tobacco smoking. People with a low of education, manual occupation, low income as well as the unemployed are daily smokers to a higher extent than those with high SES. People with low SES also stop smoking to a lesser extent in many developed countries. Several theories have been proposed to account for SES differences in health. Social capital concerns the relationships of trust, participation and reciprocity among individuals, groups and institutions in a society that may enhance health and health-related behaviors. The materialist standpoint concerns material conditions. Studies with ecological, individual and multilevel study design, mostly cross-sectional studies, suggest that both (individual level) social capital and material factors are related to tobacco smoking, although multilevel studies concerning contextual level social capital are few and mostly, at least in adult populations, fail to demonstrate associations. There is also a want of longitudinal studies to investigate the associations between social capital and material conditions, smoking initiation, smoking continuation as well as smoking cessation, since cross-sectional studies analyze only prevalence data. More sophisticated multilevel studies are needed to investigate the association between social capital and material conditions, and tobacco smoking in SES groups in different social contexts.

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources, Supplement XIV (1983).

ERIC Educational Resources Information Center

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

Compiled are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education and instruction, as well as materials related to pesticides, hazardous wastes, and public participation. Sources of abstracted/indexed materials include all levels of government, private concerns, and educational…

Citizen Participation for Urban Management. Modules 1-3. Instructor's Manual.

ERIC Educational Resources Information Center

Benson, Jonathon L.; And Others

This manual was written to accompany workshop curricular materials concerning the design and implementation of alternate forms of citizen participation mechanisms. The materials were prepared for use with management-level and pre-service personnel involved in urban management within a political environment. Three curricular modules are presented…

The System of Russian Education as Assessed by the Population: The Problem of Level and Quality

ERIC Educational Resources Information Center

Dubin, Boris; Zorkaia, Nataliia

2010-01-01

Russians are less concerned about the poor material conditions of institutions or inadequate textbooks than about the commercialization of education and high tuition. Also of great concern is the gap between educational achievement and employment opportunities, especially for the more highly educated. The perception that a higher education is a…

Physics teaching in developing countries

NASA Astrophysics Data System (ADS)

Talisayon, V. M.

1984-05-01

The need for endogeneous learning materials that will relate physics to the student's culture and environment spurred countries like India, Thailand, The Philippines and Indonesia to develop their own physics curriculum materials and laboratory equipment. Meagre resources and widespread poverty necessitated the development of laboratory materials from everyday items, recycled materials and other low-cost or no-cost local materials. The process of developing learning materials for one's teaching-learning needs in physics and the search from within for solutions to one's problems contribute in no small measure to the development of self-reliance in physics teaching of a developing country. Major concerns of developing countries are food supply, livelihood, health, nutrition and growth of economy. At the level of the student and his family, food, health, and livelihood are also primary concerns. Many physics teaching problems can be overcome on a large scale, given political support and national will. In countries where national leadership recognises that science and technology developed is essential to national development and that science education in turn is crucial to science and technology development, scarce resources can be allocated to science education. In developing countries where science education receives little or no political support, the most important resource in the physics classroom is the physics teacher. A highly motivated and adequately trained teacher can rise above the constraining circumstances of paucity of material resources and government apathy. In developing countries the need is great for self-reliance in physics teaching at the country level, and more importantly at the teacher level.

Effect of flood conditions on the deterioration of porous clay-based brick

NASA Astrophysics Data System (ADS)

Mol, L.; Tomor, A.

2017-12-01

Man-made materials represent an increasingly large proportion of geomaterials that are used to build up a rapidly expanding urbanised landscape. The deterioration of such materials is of increasing concern, in particular in light of the projected increase in storm and flood events and their associated high water levels. The effect of prolonged saturation in porous materials, man-made as well as natural, can lead to accelerated deterioration. This can be of particular concern for load-bearing structural materials, for example bridges. In this study, the effect of moisture movement has been investigated for brick masonry, as one of the most commonly used porous building materials. Saturation of brick masonry can be of particular concern for historical masonry, such as masonry arch bridges in conjunction with under increasing levels of long-term traffic loading. While flooding can lead to scour and sudden collapse of bridges, saturation can also lead to accelerated medium and long-term deterioration. A series of small-scale laboratory tests have been carried out on brick masonry to identify the effects of saturation on the material properties and changes in the rate of deterioration. Brick masonry prisms have been loaded to failure under quasi-static and long-term cyclic compression and monitored with the help of acoustic emission technique, accelerometers, linear variable differential transformers (LVDTs), permeametry and brick surface hardness measurements. Under quasi-static loading saturated samples showed significant reduction in the load capacity and increased fracture development. Under fatigue loading the number of cycles to failure reduced significantly for saturated specimens and characteristic changes in material parameters have been related to stages of fatigue deterioration. Test results indicated that increasing flood events can accelerate moisture-related deterioration in porous brick masonry.

Culture Curriculum: French, Level II.

ERIC Educational Resources Information Center

Hall, Ruth Wellman

This teacher's guide to cultural instruction at level 2 integrates materials derived from several sources. The guide is based on: (1) suggestions from "French for Secondary Schools," New York State Education Department; (2) general information concerning the geography, products, industries, regions, cities of France, the French Union, and the city…

Energy: Science Educators Look at the Literature.

ERIC Educational Resources Information Center

McKenna, Harold J.

1981-01-01

Describes efforts of a special project, "Energy Book Update," by the New York City-based National Energy Foundation, which involved the selection of books concerned with energy that would be appropriate resource materials for students at all grade levels. Books rated "outstanding" and "good" are listed by grade level. (CS)

Student Preferences and Concerns about Supplemental Instructional Material in CS0/CS1/CS2 Courses

ERIC Educational Resources Information Center

Vicenti, Giovanni; Hilberg, J. Scott; Braman, James

2017-01-01

The concept of flipping the classroom is slowly gaining tractions at all levels of education. An ever-growing set of resources gives unprecedented access to Information Technology (IT), Computer Science (CS), and Information Systems (IS) students to a significant amount of supplemental material. Videos, interactive demonstrations, and sandboxes…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials.

ERIC Educational Resources Information Center

Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

Presented is a compilation of over 3,000 abstracts on print and non-print materials related to water quality and water resources education. Entries are included from all levels of governmental sources, private concerns, and educational institutions. Each entry includes: title, author, cross references, descriptors, and availability. (CLS)

Potential environmental and regulatory implications of naturally occurring radioactive materials (NORM).

PubMed

Paschoa, A S

1998-03-01

The immense volume of naturally occurring radioactive materials (NORM) wastes produced annually by extracting industries throughout the world deserves to come to the attention of international and national environmental protection agencies and regulatory bodies. Although a great deal of work has been done in the fields of radiation protection and remedial actions concerning uranium and other mines, the need to dispose of diffuse NORM wastes will have environmental and regulatory implications that thus far are not fully appreciated. NORM wastes constitute, by and large, unwanted byproducts of industrial activities as diverse as thorium and uranium milling, niobium, tin and gold mining extraction, water treatment, and the production of oil, gas, phosphate fertilizer, coal fire and aluminum. The volumes of NORM wastes produced annually could reach levels so high that the existing low level radioactive waste (LLRW) facilities would be readily occupied by NORM if controlled disposal procedures were not adopted. On the other hand, NORM cannot just be ignored as being below radiological concern (BRC) or lower than exempt concentration levels (ECLs), because sometimes NORM concentrations reach levels as high as 1 x 10(3) kBq/kg for 226Ra, and not much less for 228Ra. Unfortunately, thus far there is not enough information available concerning NORM wastes in key industries, though the international scientific community has been concerned, for a long time now, with technologically enhanced natural radiation exposures (TENRE). This article is written with the intention of examining, to the extent possible, the potential environmental and regulatory implications of NORM wastes being produced in selected industries.

Leakage of radioactive materials from particle accelerator facilities by non-radiation disasters like fire and flooding and its environmental impacts

NASA Astrophysics Data System (ADS)

Lee, A.; Jung, N. S.; Mokhtari Oranj, L.; Lee, H. S.

2018-06-01

The leakage of radioactive materials generated at particle accelerator facilities is one of the important issues in the view of radiation safety. In this study, fire and flooding at particle accelerator facilities were considered as the non-radiation disasters which result in the leakage of radioactive materials. To analyse the expected effects at each disaster, the case study on fired and flooded particle accelerator facilities was carried out with the property investigation of interesting materials presented in the accelerator tunnel and the activity estimation. Five major materials in the tunnel were investigated: dust, insulators, concrete, metals and paints. The activation levels on the concerned materials were calculated using several Monte Carlo codes (MCNPX 2.7+SP-FISPACT 2007, FLUKA 2011.4c and PHITS 2.64+DCHAIN-SP 2001). The impact weight to environment was estimated for the different beam particles (electron, proton, carbon and uranium) and the different beam energies (100, 430, 600 and 1000 MeV/nucleon). With the consideration of the leakage path of radioactive materials due to fire and flooding, the activation level of selected materials, and the impacts to the environment were evaluated. In the case of flooding, dust, concrete and metal were found as a considerable object. In the case of fire event, dust, insulator and paint were the major concerns. As expected, the influence of normal fire and flooding at electron accelerator facilities would be relatively low for both cases.

Content, format, gender and grade level differences in elementary students' ability to read science materials as measured by the cloze procedure

NASA Astrophysics Data System (ADS)

Williams, Richard L.; Yore, Larry D.

Present instructional trends in science indicate a need to reexamine a traditional concern in science education: the readability of science textbooks. An area of reading research not well documented is the effect of color, visuals, and page layout on readability of science materials. Using the cloze readability method, the present study explored the relationships between page format, grade level, sex, content, and elementary school students ability to read science material. Significant relationships were found between cloze scores and both grade level and content, and there was a significant interaction effect between grade and sex in favor of older males. No significant relationships could be attributed to page format and sex. In the area of science content, biological materials were most difficult in terms of readability followed by earth science and physical science. Grade level data indicated that grade five materials were more difficult for that level than either grade four or grade six materials were for students at each respective level. In eight of nine cases, the science text materials would be classified at or near the frustration level of readability. The implications for textbook writers and publishers are that science reading materials need to be produced with greater attention to readability and known design principles regarding visual supplements. The implication for teachers is that students need direct instruction in using visual materials to increase their learning from text material. Present visual materials appear to neither help nor hinder the student to gain information from text material.

Brushing Your Spacecrafts Teeth: A Review of Biological Reduction Processes for Planetary Protection Missions

NASA Technical Reports Server (NTRS)

Pugel, D. E. (Betsy); Rummel, J. D.; Conley, Catharine

2017-01-01

Much like keeping your teeth clean, where you brush away biofilms that your dentist calls "plaque," there are various methods to clean spaceflight hardware of biological contamination, known as biological reduction processes. Different approaches clean your hardware's "teeth" in different ways and with different levels of effectiveness. We know that brushing at home with a simple toothbrush is convenient and has a different level of impact vs. getting your teeth cleaned at the dentist. In the same way, there are some approaches to biological reduction that may require simple tools or more complex implementation approaches (think about sonicating or just soaking your dentures, vs. brushing them). There are also some that are more effective for different degrees of cleanliness and still some that have materials compatibility concerns. In this article, we review known and NASA-certified approaches for biological reduction, pointing out materials compatibility concerns and areas where additional research is needed.

Brushing Your Spacecrafts Teeth: A Review of Biological Reduction Processes for Planetary Protection Missions

NASA Technical Reports Server (NTRS)

Pugel, D.E. (Betsy); Rummel, J. D.; Conley, C. A.

2017-01-01

Much like keeping your teeth clean, where you brush away biofilms that your dentist calls plaque, there are various methods to clean spaceflight hardware of biological contamination, known as biological reduction processes. Different approaches clean your hardwares teeth in different ways and with different levels of effectiveness. We know that brushing at home with a simple toothbrush is convenient and has a different level of impact vs. getting your teeth cleaned at the dentist. In the same way, there are some approaches to biological reduction that may require simple tools or more complex implementation approaches (think about sonicating or just soaking your dentures, vs. brushing them). There are also some that are more effective for different degrees of cleanliness and still some that have materials compatibility concerns. In this article, we review known and NASA-certified approaches for biological reduction, pointing out materials compatibility concerns and areas where additional research is needed.

Abuse Tolerance Improvements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orendorff, Christopher J.; Nagasubramanian, Ganesan; Fenton, Kyle R.

As lithium-ion battery technologies mature, the size and energy of these systems continues to increase (> 50 kWh for EVs); making safety and reliability of these high energy systems increasingly important. While most material advances for lithium-ion chemistries are directed toward improving cell performance (capacity, energy, cycle life, etc.), there are a variety of materials advancements that can be made to improve lithium-ion battery safety. Issues including energetic thermal runaway, electrolyte decomposition and flammability, anode SEI stability, and cell-level abuse tolerance continue to be critical safety concerns. This report highlights work with our collaborators to develop advanced materials to improvemore » lithium-ion battery safety and abuse tolerance and to perform cell-level characterization of new materials.« less

42 CFR 423.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 3 2011-10-01 2011-10-01 false Definitions concerning marketing materials. 423... Marketing Requirements § 423.2260 Definitions concerning marketing materials. As used in this subpart— Marketing materials. Marketing Materials include any informational materials targeted to Medicare...

42 CFR 422.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 3 2012-10-01 2012-10-01 false Definitions concerning marketing materials. 422... Marketing Requirements § 422.2260 Definitions concerning marketing materials. As used in this subpart— Marketing materials. Marketing materials include any informational materials targeted to Medicare...

42 CFR 422.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Definitions concerning marketing materials. 422... Marketing Requirements § 422.2260 Definitions concerning marketing materials. As used in this subpart— Marketing materials. Marketing materials include any informational materials targeted to Medicare...

42 CFR 422.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 3 2013-10-01 2013-10-01 false Definitions concerning marketing materials. 422... Marketing Requirements § 422.2260 Definitions concerning marketing materials. As used in this subpart— Marketing materials. Marketing materials include any informational materials targeted to Medicare...

42 CFR 423.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 3 2012-10-01 2012-10-01 false Definitions concerning marketing materials. 423... Part D Marketing Requirements § 423.2260 Definitions concerning marketing materials. As used in this subpart— Marketing materials. Marketing Materials include any informational materials targeted to Medicare...

42 CFR 423.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 3 2013-10-01 2013-10-01 false Definitions concerning marketing materials. 423... Part D Marketing Requirements § 423.2260 Definitions concerning marketing materials. As used in this subpart— Marketing materials. Marketing Materials include any informational materials targeted to Medicare...

42 CFR 423.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Definitions concerning marketing materials. 423... Part D Marketing Requirements § 423.2260 Definitions concerning marketing materials. As used in this subpart— Marketing materials. Marketing Materials include any informational materials targeted to Medicare...

Resource Letter MPF-1: Mechanical Properties of Fluids

ERIC Educational Resources Information Center

Stanley, R. C.

1974-01-01

Presents an annotated bibliography concerning the mechanical properties of fluids, including topics for use at elementary, secondary, undergraduate, and graduate levels. Indicates that the material can particularly help college physicists in improving course contents in specified fields of physics. (CC)

Electrostatic Studies for the 2008 Hubble Service Repair Mission

NASA Technical Reports Server (NTRS)

Buhler, C. R.; Clements, J. S.; Calle, C. I.

2012-01-01

High vacuum triboelectric testing of space materials was required to identify possible Electrostatic Discharge (ESD) concerns for the astronauts in space during electronics board replacement on the Hubble Space Telescope. Testing under high vacuum conditions with common materials resulted in some interesting results. Many materials were able to charge to high levels which did not dissipate quickly even when grounded. Certain materials were able to charge up in contact with grounded metals while others were not. An interesting result was that like materials did not exchange electrostatic charge under high vacuum conditions. The most surprising experimental result is the lack of brush discharges from charged insulators under high vacuum conditions.

Experiential or Material Purchases? Social Class Determines Purchase Happiness.

PubMed

Lee, Jacob C; Hall, Deborah L; Wood, Wendy

2018-05-01

Which should people buy to make themselves happy: experiences or material goods? The answer depends in part on the level of resources already available in their lives. Across multiple studies using a range of methodologies, we found that individuals of higher social class, whose abundant resources make it possible to focus on self-development and self-expression, were made happier by experiential over material purchases. No such experiential advantage emerged for individuals of lower social class, whose lesser resources engender concern with resource management and wise use of limited finances. Instead, lower-class individuals were made happier from material purchases or were equally happy from experiential and material purchases.

Teacher's Guide for Earthworms.

ERIC Educational Resources Information Center

Bruno, Merle S.; And Others

This teacher's guide on earthworms includes four major sections: (1) introduction, (2) caring for earthworms in the classroom, (3) classroom activities, and (4) the appendix. The introduction includes information concerning grade level, scheduling, materials, obtaining earthworms, field study, classroom clean-up, and records. Caring for earthworms…

Experimental microbiological issues related to biocontamination and human life support inside manned space modules

NASA Astrophysics Data System (ADS)

Canganella, Francesco; Rettberg, Petra; Bianconi, G.; di Mattia, E.; Taddei, A. R.; Iylin, V.; Novikova, N.; Fani, R.; Brigidi, P.; Vitali, B.; Candela, M.; Lobascio, C.; Saverino, A.; Simone, A.; Fossati, F.; Ferraris, M.

The issue of biocontamination in manned space modules is very important for the International Space Station (ISS) as well as for future planetary bases. We have previously carried out re-search activities concerning biofilm metabolic activities of some reference bacteria on materials commonly used for aerospace industry and currently examined for space greenhouses. It was evaluated the effect on these materials of a mixture of emulsifiers produced by Pseudomonas strain AD1 and recently characterized by chemical methods. The following materials were in-vestigated: Kevlar, Nomex, Betacloth, aluminized Kapton, conventional Kapton, Combitherm, Mylar, copper foil, Teflon, aluminum, carbon fiber composite, aluminum thermo-dissipating tex-tile, aluminum tape, Zylon, Ergoflex, Vectran. Results showed a diverse affinity of materials for bacterial biofilm formation and occasionally sessile colonization was rejected. Pre-conditioning with the emulsifying extract led in some cases to a diminish of biofilm dehydrogenase activity and development compared to untreated materials, taking into account both concentrations and experimental conditions. This also concerned the relationship between the physical traits of materials and the level of bacterial biofilm developed under the experimental conditions. Presently we are investigating microbial biofilm development on either conventional or innova-tive space materials, experimentally treated by biological or chemo-physical coating. VIABLE ISS is a flight experiment concerning the exposure of these materials inside an ISS module for about 4 years. Another initiative (MICHA) on progress is part of the MARS500 Programme, presently going on at the IBMP facility in Moscow. Data will be useful to select appropriate material to be used for life support hardware to decrease the risk of surface biocontamination and health problems inside space modules, a great challenge for both biological and medical research.

NASA Kennedy Space Center Educator Workshops: Exploring Their Impact on Teacher Attitudes and Concerns

NASA Technical Reports Server (NTRS)

Dreschel, Thomas W.

1996-01-01

The National Aeronautics and Space Administration holds summer teacher workshops to motivate teachers to use space science in their lessons. In evaluating these workshops, the areas of interest were participant beliefs about science and science teaching and concerns about educational change and innovation. The teachers attending workshops in 1995, past participants, teachers that received materials but had not attended a workshop, and science researchers were surveyed using the Beliefs about Science and Science Education Survey and/or the Stages of Concern Questionnaire. Comparisons were made by workshop length, time since workshop, and highest grade taught. Reductions in concerns were most evident in the four week workshop. Changes in beliefs were also observed relative to teaching approach and ability. Differences in beliefs were observed between teachers and science researchers. Differences were also observed relative to time since attendance and by grade level taught. It is recommended that the workshops be at least four weeks in length and in length and target specific grade levels, that refresher workshops be offered.

77 FR 59106 - Glufosinate Ammonium; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-26

... to conclude that the changes in brain glutamine synthetase activity are of significant concern for... technical material. In chronic studies in the rat, inhibition of brain glutamine synthetase, increased.... Changes in glutamine synthetase levels were observed in liver, kidney, and brain in rats. The altered...

Chemical Vapor Detection using Single-walled Carbon Nanotubes

DTIC Science & Technology

2006-05-01

1 / f noise , and achieving chemical specificity. Recently, researchers have developed approaches to...nanoscale materials, exhibit a large component of 1 / f noise .11 Such 1 / f noise is a particular concern for chemical detection, because the sensors operate at...low frequencies. We discuss how SWNT networks can be designed to reduce the level of 1 / f noise to acceptable levels.12 Lastly, we discuss the issue

Special Inspector General for Afghanistan Reconstruction (SIGAR). Supplement

DTIC Science & Technology

2015-01-30

Some information concerning corps-level ANSF personnel strength data, future requirements for Afghan Air Force (AAF) equipment, the number of trained...to press. SIGAR has published an unclassified Quarterly Report to Congress since 2008, as required by our authorizing statute. On January 30, 2015...based on the declassified materials provided. Some information con- cerning corps level ANSF personnel strength data, future requirements for Afghan Air

Adaptable and adaptive materials for light flux control

NASA Astrophysics Data System (ADS)

Sixou, Pierre; Magnaldo, A.; Nourry, J.; Laye, C.

1996-04-01

The purpose of this paper is to describe and examine properties of light flux control materials. Indeed, intelligent light flux control is necessary not only to improve everyday visual convenience but also in an economical point of view in order to reduce global home energetic cost. Several types of materials are good potential candidates for such functions: (1) The most well-known investigations concern inorganic materials such as tungsten or molybdenum oxides in which an electrochrom layer darkens when enriched in ions, and looses its color when impoverished. Unfortunately, at the moment, there is no convenient way to realize correct ions suppliers. Moreover, other drawbacks arise, such as poor reversibility, reactive interferences or a sensitivity of the material to its environment. These systems only need a low voltage level to work. But, their dynamic response, which is correlated to the component surface, is quite long. (2) At the present time, another attractive issue seems promising. More and more studies concern micro-composite liquid crystal films. For first, we shall remind their principles as well as their way of preparation. After having talked about their main advantages as intelligent materials, we shall discuss their control, their light flux adaptability, or their memory capabilities.

Risk assessment of manual material handling activities (case study: PT BRS Standard Industry)

NASA Astrophysics Data System (ADS)

Deviani; Triyanti, V.

2017-12-01

The process of moving material manually has the potential for injury to workers. The risk of injury will increase if we do not pay attention to the working conditions. The purpose of this study is to assess and analyze the injury risk level in manual handling material activity, as well as to improve the condition. The observed manual material handling activities is pole lifting and goods loading. These activities were analyzed using Job Strain Index method, Rapid Entire Body Assessment, and Chaffin’s 2D Planar Static Model. The results show that most workers who perform almost all activities have a high level of risk level with the score of JSI and REBA exceeds 9 points. For some activities, the estimated compression forces in the lumbar area also exceed the standard limits of 3400 N. Concerning this condition, several suggestions for improvement were made, improving the composition of packing, improving body posture, and making guideline posters.

Comparative Readability of Shoulder and Elbow Patient Education Materials within Orthopaedic Websites.

PubMed

Beutel, Bryan G; Danna, Natalie R; Melamed, Eitan; Capo, John T

2015-12-01

There is growing concern that the readability of online orthopaedic patient education materials are too difficult for the general public to fully understand. It is recommended that this information be at the sixth grade reading level or lower. This study compared the readability of shoulder and elbow education articles from the American Academy of Orthopaedic Surgeons (AAOS) and American Society for Surgery of the Hand (ASSH) websites. Seventy-six patient education articles from the AAOS and ASSH concerning shoulder and elbow disorders were evaluated. Each article was assessed for the number of years since its last update, word count, percentage of passive sentences, Flesch Reading Ease score, Flesch-Kincaid grade level, Simple Measure of Gobbledygook (SMOG) grade, and New Dale-Chall grade level. Only one article was at or below the sixth grade reading level. The AAOS and ASSH articles had the following respective scores: a mean Flesch Reading Ease score of 54.3 and 51.8, Flesch-Kincaid grade level of 9.4 and 10.3, SMOG grade of 8.5 and 9.4, and New Dale-Chall grade of 10.4 and 11.0. Articles from the AAOS were longer (p < 0.001), had a lower percentage of passive sentences (p < 0.001), and were more recently updated (p = 0.02) than their ASSH counterparts. Higher percentages of passive sentences were found to correlate with more difficult readability. Patient education materials regarding the shoulder and elbow on the AAOS and ASSH websites have readability scores above the recommended reading level. These may be too challenging for the majority of patients to read and consequently serve as a barrier to proper patient education. Reducing the percentage of passive sentences may serve as a novel target for improving readability.

Citizen Participation for Urban Management. Modules 1-3.

ERIC Educational Resources Information Center

Benson, Jonathon L.; And Others

These workshop curricular materials concerning the design and implementation of alternate forms of citizen participation mechanisms were prepared for use with management-level and pre-service personnel involved in urban management within a political environment. Three curricular modules are presented. Module I, "An Overview of Citizen…

PRODUCING HIGH CORN YIELDS.

ERIC Educational Resources Information Center

Illinois Univ., Urbana. Coll. of Agriculture.

RESOURCE MATERIAL ON CORN PRODUCTION FOR HIGH SCHOOL VOCATIONAL AGRICULTURE AND ADULT FARMER CLASSES WAS DESIGNED BY A STATE LEVEL GROUP OF SUBJECT MATTER SPECIALISTS, TEACHER EDUCATORS, SUPERVISORS, AND TEACHERS TO HELP SOLVE PROBLEMS THAT CONFRONT CORN PRODUCERS AT PLANTING TIME. THE SUBJECT MATTER CONCERNS PLANTING TIME, DEPTH, ROW WIDTH,…

FLESNews, Volume 4, Numbers 2-4, 1990-91.

ERIC Educational Resources Information Center

Rosenbusch, Marcia H., Ed.

Issues 2-4 of this volume of the newsletter concerning foreign language instruction in elementary schools (FLES) contain articles on theory, classroom practice, instructional materials, class activities, and professional news, including conferences and information on public policy at the federal level. Articles in these issues include the…

42 CFR 422.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 3 2011-10-01 2011-10-01 false Definitions concerning marketing materials. 422... HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Medicare Advantage Marketing Requirements § 422.2260 Definitions concerning marketing materials. As used in this subpart— Marketing...

Stages in Thinking and School Curriculum Content.

ERIC Educational Resources Information Center

Collis, Kevin F.

In earlier research the writer was constrained by the variables which were continuously appearing in both experimental class teaching experiences and various psychological experiments to distinguish four levels of cognitive sophistication in so far as mathematical material was concerned between the ages of 7 years and 17 years. In current research…

Physiological responses of feedlot heifers provided access to different levels of shade

USDA-ARS?s Scientific Manuscript database

Heat stress has a significant impact on all livestock and poultry species causing economic losses and animal well-being concerns. Providing shade is one heat-abatement strategy that has been studied for years. Material selected to provide shade for animals greatly influences the overall stress reduc...

MCH Program Interchange. Focus on Adolescent Substance Abuse.

ERIC Educational Resources Information Center

National Center for Education in Maternal and Child Health, Washington, DC.

This issue of the Maternal and Child Health (MCH) Program Interchange provides information about selected materials and publications related to adolescent substance abuse. Its intent is to facilitate the exchange of information between those concerned with substance abuse at the federal, state, and local levels, within both the public and private…

Media Objectives for Teachers.

ERIC Educational Resources Information Center

Arrasjid, Harun, Ed.; Arrasjid, Dorine, Ed.

The purpose of this book is to provide a compendium of instructional objectives concerning instructional media and materials. It is useful for either teacher training programs or college level media courses. Each objective is stated behaviorally, such as "list the important features of a tape recorder." Objectives are arranged by medium. The media…

Community-Based Solid Waste Management: A Training Facilitator's Guide.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

Urban environmental management and environmental health issues are of increasing concern worldwide. The need for urban environmental management work at the local level where the Peace Corps works most effectively is significant, but training materials dedicated specifically to community-based solid waste management work in urban areas are lacking.…

3D Printing. What's the Harm?

ERIC Educational Resources Information Center

Love, Tyler S.; Roy, Ken

2016-01-01

Health concerns from 3D printing were first documented by Stephens, Azimi, Orch, and Ramos (2013), who found that commercially available 3D printers were producing hazardous levels of ultrafine particles (UFPs) and volatile organic compounds (VOCs) when plastic materials were melted through the extruder. UFPs are particles less than 100 nanometers…

French-African Cultures: A Resource Unit.

ERIC Educational Resources Information Center

Forbes, Barbara

This resource unit concerns French-African cultures and their influence on other cultures. The materials may be incorporated into Levels 3, 4, and 5 French classes. Topics in the outline include environmental aspects; historical background; and cultural differences expressed in Senegal, Guinee, Mali, Cote d'Ivoire, Haute Volta, Togo, Dahomey,…

Readability of Healthcare Literature for Hepatitis B and C.

PubMed

Meillier, Andrew; Patel, Shyam; Al-Osaimi, Abdullah M S

2015-12-01

Patients increasingly use the Internet for educational material concerning health and diseases. This information can be utilized to teach the population of hepatitis B and C if properly written at the necessary grade level of the intended patient population. We explored the readability of online resources concerning hepatitis B and C. Google searches were performed for "Hepatitis B" and "Hepatitis C." The Internet resources that were intended for patient education were used with specific exclusions. Articles were taken from 19 and 23 different websites focusing on the symptoms, diagnosis, and treatment of hepatitis B and C, respectively. The articles were analyzed using Readability Studio Professional Edition (Oleander Solutions, Vandalia, OH) using 10 different readability scales. The results were compared and averaged to identify the anticipated academic grade level required to understand the information. The average readability scores of the 10 scales had ranges of 9.7-16.4 for hepatitis B and 9.2-16.4 for hepatitis C. The average academic reading grade level for hepatitis B was 12.6 ± 2.1 and for hepatitis C was 12.7 ± 2.1. There was no significant discrepancy between the hepatitis B and C Internet resource averaged grade levels. The resources accessed by patients are higher than the previously determined necessary grade level for patients to properly understand the intended information. The American Medical Association recommends material should be simplified to grade levels below the sixth grade level to benefit the ideal proportion of the patient population.

42 CFR 422.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Definitions concerning marketing materials. 422.2260 Section 422.2260 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND... Requirements § 422.2260 Definitions concerning marketing materials. As used in this subpart— Marketing...

Grout formulation for disposal of low-level and hazardous waste streams containing fluoride

DOEpatents

McDaniel, E.W.; Sams, T.L.; Tallent, O.K.

1987-06-02

A composition and related process for disposal of hazardous waste streams containing fluoride in cement-based materials is disclosed. the presence of fluoride in cement-based materials is disclosed. The presence of fluoride in waste materials acts as a set retarder and as a result, prevents cement-based grouts from setting. This problem is overcome by the present invention wherein calcium hydroxide is incorporated into the dry-solid portion of the grout mix. The calcium hydroxide renders the fluoride insoluble, allowing the grout to set up and immobilize all hazardous constituents of concern. 4 tabs.

Radon exhalation from building materials for decorative use.

PubMed

Chen, Jing; Rahman, Naureen M; Abu Atiya, Ibrahim

2010-04-01

Long-term exposure to radon increases the risk of developing lung cancer. There is considerable public concern about radon exhalation from building materials and the contribution to indoor radon levels. To address this concern, radon exhalation rates were determined for 53 different samples of drywall, tile and granite available on the Canadian market for interior home decoration. The radon exhalation rates ranged from non-detectable to 312 Bq m(-2) d(-1). Slate tiles and granite slabs had relatively higher radon exhalation rates than other decorative materials, such as ceramic or porcelain tiles. The average radon exhalation rates were 30 Bq m(-2) d(-1) for slate tiles and 42 Bq m(-2) d(-1) for granite slabs of various types and origins. Analysis showed that even if an entire floor was covered with a material having a radon exhalation rate of 300 Bq m(-2) d(-1), it would contribute only 18 Bq m(-3) to a tightly sealed house with an air exchange rate of 0.3 per hour. Generally speaking, building materials used in home decoration make no significant contribution to indoor radon for a house with adequate air exchange. Crown Copyright 2010. Published by Elsevier Ltd. All rights reserved.

Use of Melt Flow Rate Test in Reliability Study of Thermoplastic Encapsulation Materials in Photovoltaic Modules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moseley, J.; Miller, D.; Shah, Q.-U.-A. S. J.

2011-10-01

Use of thermoplastic materials as encapsulants in photovoltaic (PV) modules presents a potential concern in terms of high temperature creep, which should be evaluated before thermoplastics are qualified for use in the field. Historically, the issue of creep has been avoided by using thermosetting polymers as encapsulants, such as crosslinked ethylene-co-vinyl acetate (EVA). Because they lack crosslinked networks, however, thermoplastics may be subject to phase transitions and visco-elastic flow at the temperatures and mechanical stresses encountered by modules in the field, creating the potential for a number of reliability and safety issues. Thermoplastic materials investigated in this study include PV-grademore » uncured-EVA (without curing agents and therefore not crosslinked); polyvinyl butyral (PVB); thermoplastic polyurethane (TPU); and three polyolefins (PO), which have been proposed for use as PV encapsulation. Two approaches were used to evaluate the performance of these materials as encapsulants: module-level testing and a material-level testing.« less

Regulatory Evaluation of Petroleum Hydrocarbons in Dredged Material: Proceedings of a Workshop Held in Vicksburg, Mississippi on 15-17 March 1988

DTIC Science & Technology

1990-07-01

in Daphnia magna" 8909 Draft TN: Effects of Petroleum Hydrocarbon Bioaccumulation in Aquatic Animals 9009 Input to EPA/CE Implementation Manuals CONT...database for bioaccumulation of the 15 PAHs as indicative of levels of concern for petroleum hydrocarbons in marine and freshwater. ASSESSMENT OF THE PROBLEM...mc I LEIU OCy, JMISCELLANEOUS PAPER EL-90-11 of EREGULATORY EVALUATION OF PETROLEUM HYDROCARBONS IN DREDGED MATERIAL PROCEEDINGS OF A WORKSHOP

Discrete Mathematics and the Secondary Mathematics Curriculum.

ERIC Educational Resources Information Center

Dossey, John

Discrete mathematics, the mathematics of decision making for finite settings, is a topic of great interest in mathematics education at all levels. Attention is being focused on resolving the diversity of opinion concerning the exact nature of the subject, what content the curriculum should contain, who should study that material, and how that…

Science Study Aids 5: Tannin - Nature's Filter.

ERIC Educational Resources Information Center

Boeschen, John; Randall, John M.

This publication is the fifth in a series of seven supplementary investigative materials for use in secondary science classes providing up-to-date research-related investigations. This unit is structured for grade levels 9 through 12. It is concerned with the removal of heavy divalent metals from water with the use of tannin-containing…

Science Study Aids 2: Mushrooms - Nature's Recyclers.

ERIC Educational Resources Information Center

McConnell, Bill; Kurtzman, Ralph H., Jr.

This publication is the second of a series of seven supplementary investigative materials for use in secondary science classes providing up-to-date research-related investigations. This unit is structured for grade levels 7 through 9. It is concerned with food value of liquified cellulosic agricultural wastes: paper, straw, corn cobs, sawdust and…

Economic Wellbeing: Critical Reflections upon Policy and Practice in English Primary Schools

ERIC Educational Resources Information Center

Gibson, Howard

2012-01-01

Economic wellbeing has become a collective term used by British governments to signal their concern for levels of materiality where there is childhood poverty; for the need to prepare pupils for employment by teaching them relevant competences and appropriate attitudes; and for the necessity to develop skills for "personal financial…

Science Study Aids 3: Carbohydrates - Nature's Energy Source.

ERIC Educational Resources Information Center

McConnell, Bill

This publication is the third of a series of seven supplementary investigative materials for use in secondary science classes providing up-to-date research-related investigations. This unit is structured for grade levels 7 through 12. It is concerned with the role of carbohydrates as important nutrients for consumers. This guide will enable…

Elementary Environmental Learning Packet K-3, Third Revised Edition. [Primary CEL Blocks, Student Activity Cards].

ERIC Educational Resources Information Center

Brevard County School Board, Cocoa, FL.

This environmental education program consists of two levels: primary and intermediate. The learning materials are activity based and incorporate process and subject area skills with knowledge and concern for the environment. The program is also interdisciplinary including activities and skills from art, language arts, mathematics, music, science,…

Report: Suitability of Leak Detection Technology for Use In Ethanol-Blended Fuel Service

EPA Science Inventory

As the use of biofuels has increased in the last decade, there has been a level of concern over the effect that ethanol blends have on the material compatibility and operability of existing infrastructure. The focus of this research is to determine whether leak detection (LD) te...

Science Study Aids 6: Lysozyme - The Cooperative Enzyme.

ERIC Educational Resources Information Center

Boeschen, John; Alderton, Gordon

This publication is the sixth of a series of seven supplementary investigative materials for use in secondary science classes providing up-to-date research-related investigations. This unit is structured for grade levels 10 through 12. It is concerned with the crystallization of an enzyme, lysozyme, from egg white. The first part of this guide…

Hypertension 2008--awareness, understanding, and treatment of previously diagnosed hypertension in baby boomers and seniors: a survey conducted by Harris interactive on behalf of the Preventive Cardiovascular Nurses Association.

PubMed

Miller, Nancy H; Berra, Kathy; Long, Janet

2010-05-01

A Harris Interactive survey of 1548 hypertensive persons aged 44 and older confirms the findings of previous studies that showed suboptimal rates of adherence to medication and lifestyle regimens to lower blood pressure, despite a high level of awareness of the health consequences of uncontrolled blood pressure. When the study population was analyzed by age group (baby boomers, ages 44 to 62 years, and seniors, ages >or=63 years), nonadherence was greater in the baby boomer cohort, which nevertheless had a higher level of concern than the seniors. Poor communication between patients and health care providers contributes to nonadherence to treatment regimens. Patients' age plays an important role in their attitudes and behaviors regarding illness and treatment as well as their preferences as to the types of educational materials they would find helpful and the ways those materials can best be delivered. Because of the growing population of baby boomers further studies are warranted to evaluate attitudes, knowledge, and behaviors concerning the identification and treatment of hypertension.

Work and Risk: Perceptions of Nuclear-Power Personnel. a Study in Grounded Theory.

NASA Astrophysics Data System (ADS)

Fields, Claire Dewitt

1992-01-01

The utility industry has devoted time and money to assure personnel within nuclear power plants are informed about occupational risks. Radiation-protection training programs are designed to present information to employees about occupational radiation and protective procedures. Work -related concerns are known to create stress, affect the morale of the workforce, influence collective bargaining, and increase compensation claims. This study was designed to determine perceptions of risk among employees of nuclear power plants and identify variables that influence these perceptions. Four power plants were included in the study, one in Canada and three in the United States. Data were generated through participant observations and interviews of 350 participants during a period of 3 weeks at each plant. Data were gathered and analyzed following procedures advanced by Grounded Theory, a naturalistic methodology used in this study. Training content, information, and communication materials were additional sources of data. Findings indicated employees believed health and safety risks existed within the work environment. Perceptions of risk were influenced by training quality, the work environment, nuclear myths and images of the general public, and fears of family members. Among the three groups of workers, administration personnel, security personnel, and radiation workers, the latter identified a larger number of risks. Workers perceived radiation risks, shift work, and steam pipe ruptures as high-level concerns. Experiencing stress, making mistakes, and fear of sabotage were concerns shared among all employee groups at various levels of concern. Strategies developed by employees were used to control risk. Strategies included teamwork, humor, monitoring, avoidance, reframing, and activism. When risks were perceived as uncontrollable, the employee left the plant. A coping strategy of transferring concerns about radiological risks to nonradiological risks were uncovered in the data. Implications and recommendations include (a) the development of interactive training sessions concerning perceptions and facts of radiological exposures, (b) informational training for nonradiological employees, and (c) educational material development for family members and friends of employees.

Energy landscapes in proteins and glasses

NASA Astrophysics Data System (ADS)

Singh, Sadanand

Soft materials are ubiquitous in our day-to-day life. They include liquids, colloids, polymers, foams, gels, granular systems, and a number of biological materials. While these materials exhibit a wide range of textures and morphologies, many of their properties have common physicochemical origins. A better understanding of such origins would lead to rational design and engineering of functional soft materials. A common feature of soft materials is the wide range of time and length scales that characterizes their behavior. Unfortunately, available molecular modeling techniques are often ill-suited for problems that exhibit multiple length and time scales. In this thesis, we introduce and implement new simulation methods that have enabled molecular-level studies of soft materials. Such methods permit calculation of free energy surfaces, and we demonstrate their usefulness in the context of proteins and glasses, both of which exhibit rugged free energy landscapes. A first application is concerned with human amylin, a protein associated with Type II diabetes. Patients with Type II diabetes exhibit fibrillar deposits of human amylin protein in the pancreas. By applying the advanced simulation methods and algorithms developed in this work, we investigate the structure and folding dynamics of human amylin. A detailed mechanism is presented at the atomic-level for the nucleation and aggregation of the peptide. The results presented in this work could help in development of therapeutic strategies for Type II diabetes. The second application is concerned with the study of vapor-deposited ultrastable glasses. These stable glasses have, far below the conventional glass transition temperature, the properties expected from the equilibrium supercooled liquid state. Our results indicate that optimal stability is attained when deposition occurs near the Kauzmann temperature. We also show that the extraordinary stability of model vapor deposited glasses is associated with distinct structural motifs.

Food safety concerns deriving from the use of silver based food packaging materials.

PubMed

Pezzuto, Alessandra; Losasso, Carmen; Mancin, Marzia; Gallocchio, Federica; Piovesana, Alessia; Binato, Giovanni; Gallina, Albino; Marangon, Alberto; Mioni, Renzo; Favretti, Michela; Ricci, Antonia

2015-01-01

The formulation of innovative packaging solutions, exerting a functional antimicrobial role in slowing down food spoilage, is expected to have a significant impact on the food industry, allowing both the maintenance of food safety criteria for longer periods and the reduction of food waste. Different materials are considered able to exert the required antimicrobial activity, among which are materials containing silver. However, challenges exist in the application of silver to food contact materials due to knowledge gaps in the production of ingredients, stability of delivery systems in food matrices and health risks caused by the same properties which also offer the benefits. Aims of the present study were to test the effectiveness and suitability of two packaging systems, one of which contained silver, for packaging and storing Stracchino cheese, a typical Italian fresh cheese, and to investigate if there was any potential for consumers to be exposed to silver, via migration from the packaging to the cheese. Results did not show any significant difference in the effectiveness of the packaging systems on packaged Stracchino cheese, excluding that the active packaging systems exerted an inhibitory effect on the growth of spoilage microorganisms. Moreover, silver migrated into the cheese matrix throughout the storage time (24 days). Silver levels in cheese finally exceeded the maximum established level for the migration of a non-authorised substance through a functional barrier (Commission of the European Communities, 2009). This result poses safety concerns and strongly suggests the need for more research aimed at better characterizing the new packaging materials in terms of their potential impacts on human health and the environment.

Thermal stress in flexible interdigital transducers with anisotropic electroactive cellulose substrates

NASA Astrophysics Data System (ADS)

Yoon, Sean J.; Kim, Jung Woong; Kim, Hyun Chan; Kang, Jinmo; Kim, Jaehwan

2017-12-01

Thermal stress in flexible interdigital transducers a reliability concern in the development of flexible devices, which may lead to interface delamination, stress voiding and plastic deformation. In this paper, a mathematical model is presented to investigate the effect of material selections on the thermal stress in interdigital transducers. We modified the linear relationships in the composite materials theory with the effect of high curvature, anisotropic substrate and small substrate thickness. We evaluated the thermal stresses of interdigital transducers, fabricated with various electrodes, insulators and substrate materials for the comparison. The results show that, among various insulators, organic polymer developed the highest stress level while oxide showed the lowest stress level. Aluminium shows a higher stress level and curvature as an electrode than gold. As substrate materials, polyimide and electroactive cellulose show similar stress levels except the opposite sign convention to each other. Polyimide shows positive curvatures while electroactive cellulose shows negative curvatures, which is attributed to the stress and thermal expansion state of the metal/insulator composite. The results show that the insulator is found to be responsible for the confinement across the metal lines while the substrate is responsible for the confinement along the metal lines.

ASRDI oxygen technology survey. Volume 5: Density and liquid level measurement instrumentation for the cryogenic fluids oxygen, hydrogen, and nitrogen

NASA Technical Reports Server (NTRS)

Roder, H. M.

1974-01-01

Information is presented on instrumentation for density measurement, liquid level measurement, quantity gauging, and phase measurement. Coverage of existing information directly concerned with oxygen was given primary emphasis. A description of the physical principle of measurement for each instrumentation type is included. The basic materials of construction are listed if available from the source document for each instrument discussed. Cleaning requirements, procedures, and verification techniques are included.

SRB thermal protection systems materials test results in an arc-heated nitrogen environment

NASA Technical Reports Server (NTRS)

Wojciechowski, C. J.

1979-01-01

The external surface of the Solid Rocket Booster (SRB) will experience imposed thermal and shear environments due to aerodynamic heating and radiation heating during launch, staging and reentry. This report is concerned with the performance of the various TPS materials during the staging maneuver. During staging, the wash from the Space Shuttle Main Engine (SSME) exhust plumes impose severe, short duration, thermal environments on the SRB. Five different SRB TPS materials were tested in the 1 MW Arc Plasma Generator (APG) facility. The maximum simulated heating rate obtained in the APG facility was 248 Btu/sq ft./sec, however, the test duration was such that the total heat was more than simulated. Similarly, some local high shear stress levels of 0.04 psia were not simulated. Most of the SSME plume impingement area on the SRB experiences shear stress levels of 0.02 psia and lower. The shear stress levels on the test specimens were between 0.021 and 0.008 psia. The SSME plume stagnation conditions were also simulated.

Health and safety implications of alternative energy technologies. II. Solar

NASA Astrophysics Data System (ADS)

Etnier, E. L.; Watson, A. P.

1981-09-01

No energy technology is risk free when all aspects of its utilization are taken into account. Every energy technology has some attendant direct and indirect health and safety concerns. Solar technologies examined in this paper are wind, ocean thermal energy gradients, passive, photovoltaic, satellite power systems, low- and high-temperature collectors, and central power stations, as well as tidal power. For many of these technologies, insufficient historical data are available from which to assess the health risks and environmental impacts. However, their similarities to other projects make certain predictions possible. For example, anticipated problems in worker safety in constructing ocean thermal energy conversion systems will be similar to those associated with other large-scale construction projects, like deep-sea oil drilling platforms. Occupational hazards associated with photovoltaic plant operation would be those associated with normal electricity generation, although for workers involved in the actual production of photovoltaic materials, there is some concern for the toxic effects of the materials used, including silicon, cadmium, and gallium arsenide. Satellite power systems have several unique risks. These include the effects of long-term space travel for construction workers, effects on the ozone layer and the attendant risk of skin cancer in the general public, and the as-yet-undetermined effects of long-term, low-level microwave exposure. Hazards may arise from three sources in solar heating and cooling systems: water contamination from corrosion inhibitors, heat transfer fluids, and bactericides; collector over-heating, fires, and “out-gassing” and handling and disposal of system fluids and wastes. Similar concerns exist for solar thermal power systems. Even passive solar systems may increase indoor exposure levels to various air pollutants and toxic substances, eitherdirectly from the solar system itself or indirectly by trapping released pollutants from furnishings, building materials, and indoor combustion.

Associations of phthalate concentrations in floor dust and multi-surface dust with the interior materials in Japanese dwellings.

PubMed

Ait Bamai, Yu; Araki, Atsuko; Kawai, Toshio; Tsuboi, Tazuru; Saito, Ikue; Yoshioka, Eiji; Kanazawa, Ayako; Tajima, Shuji; Shi, Cong; Tamakoshi, Akiko; Kishi, Reiko

2014-01-15

Phthalates are widely used as plasticizers in numerous products. However, there has been some concern about the various effects they may have on human health. Thus, household phthalate levels are an important public health issue. While many studies have assessed phthalate levels in house dust, the association of these levels with building characteristics has scarcely been examined. The present study investigated phthalate levels in house dust samples collected from the living areas of homes, and examined associations between these phthalate levels and the interior materials. Dust was collected from two portions of the living area: floor dust from the entire floor surface, and multi-surface dust from objects more than 35 cm above the floor. The levels of seven phthalates were measured using gas chromatography/mass spectrometry in selective ion monitoring mode. Phthalate levels were higher in multi-surface dust than in floor dust. Among floor dust samples, those from dwellings with compressed wooden flooring had significantly higher levels of di-iso-butyl phthalate compared to those with other floor materials, while polyvinyl chloride (PVC) flooring was associated with higher di-2-ethylhexyl phthalate (DEHP) levels. Among multi-surface dust samples, higher levels of DEHP and di-iso-nonyl phthalate (DINP) were found in samples from homes with PVC wallpaper than without. The number of PVC interior materials was significantly positively correlated with the levels of DEHP and DINP in multi-surface dust. The phthalate levels in multi-surface dust were associated with the interior surface materials, and those in floor dust were directly related to the flooring materials. Our findings show that when using house dust as an exposure assessment, it is very important to note where the samples were collected from. The present report provides useful information about the association between phthalates and dust inside dwellings, which will assist with establishing public health provisions. © 2013. Published by Elsevier B.V. All rights reserved.

What do women know about breast cancer prophylaxis and a healthy style of life?

PubMed Central

Sielska, Jolanta; Matecka, Monika; Dąbrowska, Eliza; Jakubek, Ewa; Urbaniak, Monika

2015-01-01

Aim The aim of the study was to determine the factors influencing women's knowledge concerning breast cancer prophylaxis and find out the sources of the knowledge. Background In the Greater Poland region, breast cancer has been the most frequently detected tumour for years. The percentage of breast cancer cases has increased by 31% in the last decade. Materials and methods The study encompassed 337 women aged 40–59 who participated in the mammographic examinations. An original research tool was used which assessed the level of knowledge concerning breast cancer prophylaxis, the knowledge of health-oriented behaviour in this regard and the influence of the medical personnel on women's education. Results Age is a factor diversifying the knowledge of the breast self-examination method. Doctors and nurses were rarely indicated as a source of knowledge concerning breast cancer prophylaxis. The subjects presented a high level of knowledge of the factors increasing the risk of developing cancer. Conclusions A correlation between the level of education and the knowledge of one's own breast to a degree which enables a woman to detect even a slight change was observed. Vital findings also concern the sources of knowledge concerning breast cancer prophylaxis. The results of the studies indicated little informative support on the part of the medical personnel; therefore, one should call for supplementing training courses for doctors and nurses focusing on the issues of prophylaxis, including the method of breast self-examination. PMID:26549989

Active Remote Sensing of Natural Resources: Course Notes. Science Series No. 5. Final Technical Report.

ERIC Educational Resources Information Center

Maxwell, Eugene L.

Presented is a portion of a research project which developed materials for teaching remote sensing of natural resources on an interdisciplinary basis at the graduate level. This volume contains notes developed for a course in active remote sensing. It is concerned with those methods or systems which generate the electromagnetic energy…

Student Connections with Academic Texts: A Phenomenographic Study of Reading

ERIC Educational Resources Information Center

MacMillan, Margy

2014-01-01

Concerns about the ability of post-secondary students to read scholarly materials are well documented in the literature. A key aspect of reading at the deeper level expected of these students is connecting new information to prior knowledge. This study is based on an activity where students were explicitly required to make such connections as part…

Eliminating Sexism: Rewriting the Scripts. An Informational Guide to Sex Stereotyping, Sex Bias and Sex Discrimination. Instructor's Manual.

ERIC Educational Resources Information Center

Etheridge, Rose M.; Rice, Eric

Part of a series devoted to identifying and evaluating strategies which vocational education administrators and instructors can use at the secondary student, teacher, or administrator level to eliminate sex stereotyping and sex bias in vocational education programs, this manual provides teachers with instructional materials concerning the current…

A Parent's Guide to the Social Studies. Revised.

ERIC Educational Resources Information Center

Roselle, Daniel; Singleton, Laurel R.

This guide for parents seeks to answer seven questions concerning the social studies: (1) What is social studies? (2) Why is social studies important at every grade level? (3) What kinds of materials are used to teach social studies? (4) What teaching strategies are used in social studies classes? (5) What have the national reports on education…

Teaching Methods in Biology Education and Sustainability Education Including Outdoor Education for Promoting Sustainability--A Literature Review

ERIC Educational Resources Information Center

Jeronen, Eila; Palmberg, Irmeli; Yli-Panula, Eija

2017-01-01

There are very few studies concerning the importance of teaching methods in biology education and environmental education including outdoor education for promoting sustainability at the levels of primary and secondary schools and pre-service teacher education. The material was selected using special keywords from biology and sustainable education…

Suggested Resource and Instructional Materials for Obtaining Information About Careers. Bulletin No. 42-974.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield. Div. of Vocational and Technical Education.

The guide contains a brief introductory discussion of occupational information concerns and secondary level program content and procedures. The remainder of the guide contains separately organized lists of resource organizations for publications and films, as well as titles and availability of publications, films, and articles for use in: (1) all…

The Augusta College Humanities Program: Strengthening an Introductory Three-Course Sequence.

ERIC Educational Resources Information Center

American Association of State Colleges and Universities, Washington, DC.

Presented is a compilation of materials concerning the Augusta College Humanities Program in Augusta, Georgia, beginning with a brief description of the program and its background. In 1984, the college began a 2.5-year project to revitalize and strengthen its required sophomore level three course humanities sequence (Greece and Rome, the Middle…

Afro-American Curriculum Office and Resource Center. ESEA Title III, Toledo Public Schools, Toledo, Ohio.

ERIC Educational Resources Information Center

Meinke, Dean L.; Glick, I. David

The Afro-American Curriculum Office and Resource Center, funded under Title III of the 1965 Elementary Secondary Education Act, had the general purpose of upgrading the instructional level and the material resources concerning the black American's contributions to this country's past and present life. Although the project was directly administered…

The influence of maternal self-objectification, materialism and parenting style on potentially sexualized 'grown up' behaviours and appearance concerns in 5-8year old girls.

PubMed

Slater, Amy; Tiggemann, Marika

2016-08-01

There is widespread concern about young girls displaying 'grown up' or sexualized behaviours, as well as experiencing body image and appearance concerns that were previously thought to only impact much older girls. The present study examined the influence of three maternal attributes, self-objectification, materialism and parenting style, on sexualized behaviours and appearance concerns in young girls. A sample of 252 Australian mothers of 5-8year old girls reported on the behaviours and appearance concerns observed in their daughters and also completed measures of their own self-objectification, materialism and parenting style. It was found that a significant proportion of young girls were engaging with 'teen' culture, using beauty products and expressing some degree of appearance concern. Maternal self-objectification was related to daughters' engagement in teen culture, use of beauty products and appearance concern. Maternal materialism was related to girls' engagement in teen culture and appearance concern, while an authoritative parenting style was negatively related to girls' use of beauty products. The findings suggest that maternal self-objectification and materialism play a role in the body image and appearance concerns of young girls, and in so doing, identify these maternal attributes as novel potential targets for intervention. Copyright © 2016 Elsevier Ltd. All rights reserved.

76 FR 41178 - Pesticides; Policies Concerning Products Containing Nanoscale Materials; Opportunity for Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

... 17, 2011, concerning possible approaches for obtaining information about what nanoscale materials are... information about what nanoscale materials are present in registered pesticide products. Four requests for a...

Rapid Radiochemical Methods for Asphalt Paving Material ...

EPA Pesticide Factsheets

Technical Brief Validated rapid radiochemical methods for alpha and beta emitters in solid matrices that are commonly encountered in urban environments were previously unavailable for public use by responding laboratories. A lack of tested rapid methods would delay the quick determination of contamination levels and the assessment of acceptable site-specific exposure levels. Of special concern are matrices with rough and porous surfaces, which allow the movement of radioactive material deep into the building material making it difficult to detect. This research focuses on methods that address preparation, radiochemical separation, and analysis of asphalt paving materials and asphalt roofing shingles. These matrices, common to outdoor environments, challenge the capability and capacity of very experienced radiochemistry laboratories. Generally, routine sample preparation and dissolution techniques produce liquid samples (representative of the original sample material) that can be processed using available radiochemical methods. The asphalt materials are especially difficult because they do not readily lend themselves to these routine sample preparation and dissolution techniques. The HSRP and ORIA coordinate radiological reference laboratory priorities and activities in conjunction with HSRP’s Partner Process. As part of the collaboration, the HSRP worked with ORIA to publish rapid radioanalytical methods for selected radionuclides in building material matrice

Study on the behavior and mechanism of polycarbonate with hot-water aging

NASA Astrophysics Data System (ADS)

Kong, L. P.; Zhao, Y. X.; Zhou, C. H.; Huang, Y. H.; Tang, M.; Gao, J. G.

2016-07-01

The present work was concerned with hot-water aging behavior and mechanism of Bisphenol A polycarbonate (PC) used as food and packaging materials. It indicated that with the aging time prolonged, PC sample had internal defects and the mechanical properties of PC materials changed not too much, molecular weight decreased, thermal stability declined. Phenolic hydroxyl absorption intensity enhanced in IR spectra and the maximum absorption wavelength red shift of benzene in UV-Vis spectra, the level of BPA increased. The color change of PC sample was not apparent.

Offgassing Characterization of the Columbus Laboratory Module

NASA Technical Reports Server (NTRS)

Rampini, riccardo; Lobascio, Cesare; Perry, Jay L.; Hinderer, Stephan

2005-01-01

Trace gaseous contamination in the cabin environment is a major concern for manned spacecraft, especially those designed for long duration missions, such as the International Space Station (ISS). During the design phase, predicting the European-built Columbus laboratory module s contribution to the ISS s overall trace contaminant load relied on "trace gas budgeting" based on material level and assembled article tests data. In support of the Qualification Review, a final offgassing test has been performed on the complete Columbus module to gain cumulative system offgassing data. Comparison between the results of the predicted offgassing load based on the budgeted material/assembled article-level offgassing rates and the module-level offgassing test is presented. The Columbus module offgassing test results are also compared to results from similar tests conducted for Node 1, U.S. Laboratory, and Airlock modules.

Band Structure Characteristics of Nacreous Composite Materials with Various Defects

NASA Astrophysics Data System (ADS)

Yin, J.; Zhang, S.; Zhang, H. W.; Chen, B. S.

2016-06-01

Nacreous composite materials have excellent mechanical properties, such as high strength, high toughness, and wide phononic band gap. In order to research band structure characteristics of nacreous composite materials with various defects, supercell models with the Brick-and-Mortar microstructure are considered. An efficient multi-level substructure algorithm is employed to discuss the band structure. Furthermore, two common systems with point and line defects and varied material parameters are discussed. In addition, band structures concerning straight and deflected crack defects are calculated by changing the shear modulus of the mortar. Finally, the sensitivity of band structures to the random material distribution is presented by considering different volume ratios of the brick. The results reveal that the first band gap of a nacreous composite material is insensitive to defects under certain conditions. It will be of great value to the design and synthesis of new nacreous composite materials for better dynamic properties.

Nuclear Materials Science

NASA Astrophysics Data System (ADS)

Whittle, Karl

2016-06-01

Concerns around global warming have led to a nuclear renaissance in many countries, meanwhile the nuclear industry is warning already of a need to train more nuclear engineers and scientists, who are needed in a range of areas from healthcare and radiation detection to space exploration and advanced materials as well as for the nuclear power industry. Here Karl Whittle provides a solid overview of the intersection of nuclear engineering and materials science at a level approachable by advanced students from materials, engineering and physics. The text explains the unique aspects needed in the design and implementation of materials for use in demanding nuclear settings. In addition to material properties and their interaction with radiation the book covers a range of topics including reactor design, fuels, fusion, future technologies and lessons learned from past incidents. Accompanied by problems, videos and teaching aids the book is suitable for a course text in nuclear materials and a reference for those already working in the field.

Visualization of transient phenomena during the interaction of pulsed CO2 laser radiation with matter

NASA Astrophysics Data System (ADS)

Schmitt, R.; Hugenschmidt, Manfred

1996-05-01

Carbon-dioxide-lasers operating in the pulsed mode with energy densities up to several tens of J/cm2 and peak power densities in the multi-MW/cm2-range may cause fast heating and melting. Eventually quasi-explosive ejection, decomposition or vaporization of material can be observed. Surface plasmas are strongly influencing the energy transfer from the laser radiation field to any target. For optically transparent plastics, such as PMMA for example, only slowly expanding plasmas (LSC-waves) are ignited at fluences around 20 J/cm2, with a low level of self-luminosity. High brightness, supersonically expanding plasma jets (LSD-waves) are generated at the same fluences on glasses. Similar conditions were found for metals as well. From recordings with a high speed CCD-camera, interesting features concerning the initial plasma phases and temporal evolution were deduced. Additionally, information was obtained concerning the quasi explosive ejection of material for PMMA.

Explanatory models concerning the effects of small-area characteristics on individual health.

PubMed

Voigtländer, Sven; Vogt, Verena; Mielck, Andreas; Razum, Oliver

2014-06-01

Material and social living conditions at the small-area level are assumed to have an effect on individual health. We review existing explanatory models concerning the effects of small-area characteristics on health and describe the gaps future research should try to fill. Systematic literature search for, and analysis of, studies that propose an explanatory model of the relationship between small-area characteristics and health. Fourteen studies met our inclusion criteria. Using various theoretical approaches, almost all of the models are based on a three-tier structure linking social inequalities (posited at the macro-level), small-area characteristics (posited at the meso-level) and individual health (micro-level). No study explicitly defines the geographical borders of the small-area context. The health impact of the small-area characteristics is explained by specific pathways involving mediating factors (psychological, behavioural, biological). These pathways tend to be seen as uni-directional; often, causality is implied. They may be modified by individual factors. A number of issues need more attention in research on explanatory models concerning small-area effects on health. Among them are the (geographical) definition of the small-area context; the systematic description of pathways comprising small-area contextual as well as compositional factors; questions of direction of association and causality; and the integration of a time dimension.

Predictors of Colorectal Cancer Knowledge among Adults in the United Arab Emirates

PubMed

Al-Sharbatti, Shatha; Muttappallymyalil, Jayakumary; Sreedharan, Jayadevan; Almosawy, Yasien

2017-09-27

Objective: To assess knowledge regarding colorectal cancer (CRC) and to identify its predictors in the UAE. Materials and Methods: A cross sectional study was conducted among subjects ≥ 50 years-old, using a validated self-administered questionnaire. Awareness of CRC risk factors, warning signs/symptoms (S/S), and screening methods was evaluated with a level of knowledge score for various areas. Low (poor) knowledge was defined as a score below the corresponding average value. The Chi-square test and logistic regression were used in the statistical analysis. Results: The percentage of respondents who had poor knowledge score concerning risk factors, warning S/S and screening were 81.7%, 84.7% and 94.1% respectively. Male and lower education level subjects had significantly higher probability of low knowledge related to risk factors and warning S/S. Also respondents without a family history of CRC or personal history of polyps had a significantly higher probability of low knowledge concerning warning S/S compared to those who had a positive history. Significantly higher probability of low knowledge concerning screening methods was noted among non-Arabs and subjects with a lower education level. Conclusion: Most of the respondents had poor knowledge. Gender, education level, family and personal history and ethnicity were found to be significant predictors of CRC knowledge. Creative Commons Attribution License

Predictors of Colorectal Cancer Knowledge among Adults in the United Arab Emirates

PubMed Central

Al-Sharbatti, Shatha; Muttappallymyalil, Jayakumary; Sreedharan, Jayadevan; Almosawy, Yasien

2017-01-01

Objective: To assess knowledge regarding colorectal cancer (CRC) and to identify its predictors in the UAE. Materials and Methods: A cross sectional study was conducted among subjects ≥ 50 years-old, using a validated self-administered questionnaire. Awareness of CRC risk factors, warning signs/symptoms (S/S), and screening methods was evaluated with a level of knowledge score for various areas. Low (poor) knowledge was defined as a score below the corresponding average value. The Chi-square test and logistic regression were used in the statistical analysis. Results: The percentage of respondents who had poor knowledge score concerning risk factors, warning S/S and screening were 81.7%, 84.7% and 94.1% respectively. Male and lower education level subjects had significantly higher probability of low knowledge related to risk factors and warning S/S. Also respondents without a family history of CRC or personal history of polyps had a significantly higher probability of low knowledge concerning warning S/S compared to those who had a positive history. Significantly higher probability of low knowledge concerning screening methods was noted among non-Arabs and subjects with a lower education level. Conclusion: Most of the respondents had poor knowledge. Gender, education level, family and personal history and ethnicity were found to be significant predictors of CRC knowledge. PMID:28950678

Ion beam-based studies for tribological phenomena

NASA Astrophysics Data System (ADS)

Racolta, P. M.; Popa-Simil, L.; Alexandreanu, B.

1996-06-01

Custom-designed experiments based on the Thin Layer Activation technique (TLA) were completed, providing information on the wear level of some engine components with additional data on transfer and adhesion of material between metallic friction couples using the RBS method. RBS experimental results concerning material transfer for a steel-brass friction couple are presented and discussed in the paper. Also, the types and concentrations of the wear products in used lubricant oils were determined by in-air PIXE. A sequential lubricant filtering-based procedure for determining the dimension distribution of the resulting radioactive wear particles by low level γ-spectrometry is presented. Experimental XRF spectra showing the non-homogeneous distribution of the retained waste particles on the filtering paper are shown.

Fatal crash involvement of unlicensed young drivers: county level differences according to material deprivation and urbanicity in the United States.

PubMed

Hanna, Christian L; Laflamme, Lucie; Bingham, C Raymond

2012-03-01

This study assessed the association between county level material deprivation and urbanization with fatal road traffic crashes involving young unlicensed drivers in the United States (US). Road traffic crashes have been positively associated with area deprivation and low population density but thus far few studies have been concerned specifically with young drivers, especially those that are unlicensed. A county material deprivation index was derived from the Townsend Material Deprivation Index, with variables extracted from the US Census (2000). An urbanicity scale was adapted from the US Department of Agriculture's Rural-Urban Continuum Codes (2003). Data on fatal crashes involving a young unlicensed driver during a seven-year period (2000-2006; n=3059) were extracted from the Fatality Analysis Reporting System. The effect of deprivation and urbanicity on the odds of the occurrence of at least one fatal crash at the county level was modeled by conditional and unconditional logistic regression. The conditional model found a positive association between material deprivation and a fatal crash involving a young unlicensed driver (OR=1.19, 95% CI 1.17, 1.21). The interaction between urbanicity and material deprivation was negatively associated in suburban counties for fatal crashes (OR=0.92, 95% CI 0.90, 0.95). An association with material deprivation and the likelihood of a fatal crash involving a young unlicensed driver is a new finding. It can be used to inform specific county-level interventions and promote state licensing policies to provide equity in young people's mobility regardless of where they live. Copyright © 2011. Published by Elsevier Ltd.

Cross-Cultural Competency and Special Education: Perceptions and Experiences of Korean Parents of Children with Special Needs.

ERIC Educational Resources Information Center

Park, Jiyeon; Turnbull, Ann P.

2001-01-01

A study investigated the perceptions, levels of satisfaction, and concerns of 8 Korean parents of children with disabilities in regard to U.S. special education services. Participants expressed their satisfaction with certain aspects of the special education system, agreed they had been sent too many written materials, and used mediators.…

Listening to Students' Voices: Educational Materials Written by and for LEP Adult Literacy Learners. NCLE Digest.

ERIC Educational Resources Information Center

Peyton, Joy Kreeft

Students at all levels of literacy learning can express their ideas in print. Teachers working with student writers have found that the attempt to express, organize, and understand personal experience is also a powerful language learning device. When students publish their writings, they can see their own thoughts and concerns, and those of others…

Pre-Constructed Dynamic Geometry Materials in the Classroom--How Do They Facilitate the Learning of "Similar Triangles"?

ERIC Educational Resources Information Center

Poon, Kin Keung; Wong, Kwan Lam

2017-01-01

The use of dynamic geometry software (DGS) is becoming increasingly familiar among teachers, but letting students conduct inquiries using computers is still not a welcome idea. In addition to logistics and discipline concerns, many teachers believe that mathematics at the lower secondary level can be learned efficiently through practice alone.…

A physical interpretation of softening of pressure-sensitive and anisotropic materials

NASA Astrophysics Data System (ADS)

Hu, W.; Wang, Z. R.

2010-07-01

Several new dynamic models are proposed to explain the mechanical behaviour of softening of pressure-sensitive and anisotropic materials at a macroscopic level. If a pressure-sensitive material is loaded by a force and a variable pressure or an anisotropic material is subjected to a load with a changeable loading direction relative to the material frame, their stress-strain relationships become more complicated. Mechanical behaviours of these stress-strain relationships have to cover the feature concerning the change of pressure or loading direction, i.e. mechanical properties of pressure-sensitive material corresponding to different pressure state or anisotropic material relating to different loading direction will play an important role in deciding their stress-strain relationships. Such shift of material properties due to the variable pressure or loading history may significantly expand the traditional concept of the stability of material deformation, and the second order of plastic work being negative may be a response of stable plastic deformation, which is commonly called softening.

Multilevel model of polycrystalline materials: grain boundary sliding description

NASA Astrophysics Data System (ADS)

Sharifullina, E.; Shveykin, A.; Trusov, P.

2017-12-01

Material behavior description in a wide range of thermomechanical effects is one of the topical areas in mathematical modeling. Inclusion of grain boundary sliding as an important mechanism of polycrystalline material deformation at elevated temperatures and predominant deformation mechanism of metals and alloys in structural superplasticity allows to simulate various deformation regimes and their transitions (including superplasticity regime with switch-on and switch-off regimes). The paper is devoted to description of grain boundary sliding in structure of two-level model, based on crystal plasticity, and relations for determination the contribution of this mechanism to inelastic deformation. Some results are presented concerning computational experiments of polycrystalline representative volume deformation using developed model.

Predicting Material Performance in the Space Environment from Laboratory Test Data, Static Design Environments, and Space Weather Models

NASA Technical Reports Server (NTRS)

Minow, Josep I.; Edwards, David L.

2008-01-01

Qualifying materials for use in the space environment is typically accomplished with laboratory exposures to simulated UV/EUV, atomic oxygen, and charged particle radiation environments with in-situ or subsequent measurements of material properties of interest to the particular application. Choice of environment exposure levels are derived from static design environments intended to represent either mean or extreme conditions that are anticipated to be encountered during a mission. The real space environment however is quite variable. Predictions of the on orbit performance of a material qualified to laboratory environments can be done using information on 'space weather' variations in the real environment. This presentation will first review the variability of space environments of concern for material degradation and then demonstrate techniques for using test data to predict material performance in a variety of space environments from low Earth orbit to interplanetary space using historical measurements and space weather models.

Sustainability in a materials world

USGS Publications Warehouse

Amey, E.B.; Lemons, J.F.; Berry, Darbi R.

1996-01-01

Many adverse impacts on the environment can be directly related to the materials dispersed to the environment during processing or use, or after use as refuse and waste. Some materials, such as toxic wastes, are a major concern because they create immediate problems with longer-term effects. Gases released by major manufacturing industries can contribute to long-term regional and global problems such as acid rain or increased carbon dioxide in the atmosphere. The use of other materials, however, appears to be more benign or strictly localized in their impacts. If the current per capita level of material consumption in the United States was achieved worldwide, it would create major stresses on both resource adequacy and the environment. In fact, stresses have been created and will continue from this consumption style (developed countries) even if others don't achieve them. ?? 1996 International Association for Mathematical Geology.

Removal of Radioactive Materials from Groundwater Using Porous Iron Composite Media

NASA Astrophysics Data System (ADS)

Dorward, E.; Thomas, R.; Cochran, J. P.; Chang, H. S.; Tandukar, M.; Coutelot, F.; Seaman, J. C.

2017-12-01

Uranium (U) is a concern in aqueous environments because of its toxicity. Reducing the mobile U(VI) to the relatively immobile U(IV) can decrease soluble U concentrations. Zero valent iron (ZVI) has been demonstrated as an effective reducing agent for U(VI) as well as other frequently occurring co-contaminants, such as nitrate (NO3-). However, the ability of ZVI to chemically reduce and immobilize U and other associated contaminants in more complex systems containing many alternate electron acceptors and non-ideal chemical conditions remains a concern. Porous iron composite (PIC) materials were evaluated for their ability to address these concerns in both batch and column experiments. We created an artificial groundwater surrogate containing ≈ 100 mg L-1 NO3-, 200 mg L-1 alkalinity, 100 µg L-1 U(VI) as uranyl (UO2+2), 100 µg L-1 rhenium (Re) as perrhenate (ReO4-), and 50 µg L-1 arsenic (As). In batch, we reacted 5 grams of PIC material with 200 mL groundwater surrogate under two different atmospheric conditions to evaluate the impact of O2. At specific time intervals, 5 mL aliquots from each batch treatment were removed for chemical analysis (i.e., U, Re, As, Fe, NO3, etc.) and the pH and ORP of the remaining suspension was measured. The PIC was effective at fully reducing NO3- levels over the extended reaction time despite rapid pH increase (> 8) during equilibration. Soluble levels of U and Re, a chemical surrogate for 99Tc, decreased in a similar fashion to NO3- in both the presence and absence of O2. Soluble As levels decreased more rapidly than other contaminants, but remained at ≈ 1 µg L-1. Very little nitrite (NO2-) was detected in the batch tests, with NH4+ levels consistent with the amount of NO3- reduced. Similar rates of immobilization for U, Re, and As were observed in the presence and absence of NO3-. Subsequent leaching tests corresponding to residence times ranging from 120 to 7.5 minutes demonstrated the ability of the PIC to reduce NO3- to NH4+, with no persistence of NO2-. Uranium and As were readily immobilized regardless of flow velocity. A strong kinetic component was observed for Re leaching behavior in the column tests. These results indicate the strong ability of PIC material to reduce U, NO3-, and other species under conditions that frequently inhibit conventional ZVI effectiveness.

Owens-Illinois liquid solar collector materials assessment

NASA Technical Reports Server (NTRS)

Nichols, R. L.

1978-01-01

From the beginning, it was noted that the baseline drawings for the liquid solar collector exhibited a distinct weakness concerning materials specification where elastomers, plastics, and foam insulation materials were utilized. A relatively small effort by a competent design organization would alleviate this deficiency. Based on results obtained from boilout and stagnation tests on the solar simulator, it was concluded that proof testing of the collector tubes prior to use helps to predict their performance for limited service life. Fracture mechanics data are desirable for predicting extended service life and establishing a minimum proof pressure level requirement. The temperature capability of this collector system was increased as the design matured and the coating efficiency improved. This higher temperature demands the use of higher temperature materials at critical locations in the collector.

Hydrogen and advanced aerospace materials

NASA Technical Reports Server (NTRS)

Nelson, Howard G.

1988-01-01

The hydrogen embrittlement is briefly reviewed and discussed in terms of specific structural materials considered for use on a generic, hydrogen-fueled, hypersonic aerospace vehicle. A few unusual hydrogen-material incompatibility concerns are identified and some solution methodologies are discussed that could potentially lessen these concerns.

Are we failing to communicate? Internet-based patient education materials and radiation safety.

PubMed

Hansberry, David R; Ramchand, Tekchand; Patel, Shyam; Kraus, Carl; Jung, Jin; Agarwal, Nitin; Gonzales, Sharon F; Baker, Stephen R

2014-09-01

Patients frequently turn to the Internet when seeking answers to healthcare related inquiries including questions about the effects of radiation when undergoing radiologic studies. We investigate the readability of online patient education materials concerning radiation safety from multiple Internet resources. Patient education material regarding radiation safety was downloaded from 8 different websites encompassing: (1) the Centers for Disease Control and Prevention, (2) the Environmental Protection Agency, (3) the European Society of Radiology, (4) the Food and Drug Administration, (5) the Mayo Clinic, (6) MedlinePlus, (7) the Nuclear Regulatory Commission, and (8) the Society of Pediatric Radiology. From these 8 resources, a total of 45 articles were analyzed for their level of readability using 10 different readability scales. The 45 articles had a level of readability ranging from 9.4 to the 17.2 grade level. Only 3/45 (6.7%) were written below the 10th grade level. No statistical difference was seen between the readability level of the 8 different websites. All 45 articles from all 8 websites failed to meet the recommendations set forth by the National Institutes of Health and American Medical Association that patient education resources be written between the 3rd and 7th grade level. Rewriting the patient education resources on radiation safety from each of these 8 websites would help many consumers of healthcare information adequately comprehend such material. Copyright © 2014. Published by Elsevier Ireland Ltd.

Effectiveness of the use of question-driven levels of inquiry based instruction (QD-LOIBI) assisted visual multimedia supported teaching material on enhancing scientific explanation ability senior high school students

NASA Astrophysics Data System (ADS)

Suhandi, A.; Muslim; Samsudin, A.; Hermita, N.; Supriyatman

2018-05-01

In this study, the effectiveness of the use of Question-Driven Levels of Inquiry Based Instruction (QD-LOIBI) assisted visual multimedia supported teaching materials on enhancing senior high school students scientific explanation ability has been studied. QD-LOIBI was designed by following five-levels of inquiry proposed by Wenning. Visual multimedia used in teaching materials included image (photo), virtual simulation and video phenomena. QD-LOIBI assisted teaching materials supported by visual multimedia were tried out on senior high school students at one high school in one district in West Java. A quasi-experiment method with design one experiment group (n = 31) and one control group (n = 32) were used. Experimental group were given QD-LOIBI assisted teaching material supported by visual multimedia, whereas the control group were given QD-LOIBI assisted teaching materials not supported visual multimedia. Data on the ability of scientific explanation in both groups were collected by scientific explanation ability test in essay form concerning kinetic gas theory concept. The results showed that the number of students in the experimental class that has increased the category and quality of scientific explanation is greater than in the control class. These results indicate that the use of multimedia supported instructional materials developed for implementation of QD-LOIBI can improve students’ ability to provide explanations supported by scientific evidence gained from practicum activities and applicable concepts, laws, principles or theories.

Polyfluorinated substances in abiotic standard reference materials.

PubMed

Reiner, Jessica L; Blaine, Andrea C; Higgins, Christopher P; Huset, Carin; Jenkins, Thomas M; Kwadijk, Christiaan J A F; Lange, Cleston C; Muir, Derek C G; Reagen, William K; Rich, Courtney; Small, Jeff M; Strynar, Mark J; Washington, John W; Yoo, Hoon; Keller, Jennifer M

2015-04-01

The National Institute of Standards and Technology (NIST) has a wide range of Standard Reference Materials (SRMs) which have values assigned for legacy organic pollutants and toxic elements. Existing SRMs serve as homogenous materials that can be used for method development, method validation, and measurement for contaminants that are now of concern. NIST and multiple groups have been measuring the mass fraction of a group of emerging contaminants, polyfluorinated substances (PFASs), in a variety of SRMs. Here we report levels determined in an interlaboratory comparison of up to 23 PFASs determined in five SRMs: sediment (SRMs 1941b and 1944), house dust (SRM 2585), soil (SRM 2586), and sludge (SRM 2781). Measurements presented show an array of PFASs, with perfluorooctane sulfonate being the most frequently detected. SRMs 1941b, 1944, and 2586 had relatively low concentrations of most PFASs measured while 23 PFASs were at detectable levels in SRM 2585 and most of the PFASs measured were at detectable levels in SRM 2781. The measurements made in this study were used to add values to the Certificates of Analysis for SRMs 2585 and 2781.

Composite Overwrapped Pressure Vessels (COPV) Materials Aging Issues

NASA Technical Reports Server (NTRS)

2010-01-01

This slide presentation reviews some of the issues concerning the aging of the materials in a Composite Overwrapped Pressure Vessels (COPV). The basic composition of the COPV is a Boss, a composite overwrap, and a metallic liner. The lifetime of a COPV is affected by the age of the overwrap, the cyclic fatigue of the metallic liner, and stress rupture life, a sudden and catastrophic failure of the overwrap while holding at a stress level below the ultimate strength for an extended time. There is information about the coupon tests that were performed, and a test on a flight COPV.

Evaluating the suitability of highly cross-linked and remelted materials for use in posterior stabilized knees.

PubMed

Huot, J Caitlin; Van Citters, Douglas W; Currier, John H; Currier, Barbara H; Mayor, Michael B; Collier, John P

2010-11-01

Posterior stabilized (PS) knee designs are a popular choice for cruciate sacrificing knee arthroplasty procedures. The introduction of PS inserts fabricated from highly cross-linked and remelted Ultra High Molecular Weight Polyethylene (UHMWPE) has recently generated concern as these materials have been shown to possess reduced mechanical properties. This study investigated whether highly cross-linked and remelted UHMWPE material (referred to as XRP) can be expected to perform similarly to historical gamma-air polyethylene, which has suffered few reported incidences of tibial post failure. Never-implanted gamma-air PS tibial inserts shelf-aged 14 years were examined and compared to XRP materials. Evaluation of oxidation levels, impact toughness, and fatigue strength demonstrated never-implanted gamma-air PS tibial inserts to possess nonuniform mechanical properties. Despite severe oxidation along the exterior of gamma-air tibial posts, comparatively low oxidation levels at the center of the tibial posts corresponded to sufficiently high mechanical properties. XRP material (75 kGy) showed superior impact toughness over shelf aged gamma-air material; however, tibial post fatigue testing demonstrated XRP material (100 kGy) to be less resistant to fatigue failure than historical gamma-air material. Results from this study indicate that XRP materials (100 kGy) may demonstrate an inferior resistance to tibial post failure than historical polyethylene. © 2010 Wiley Periodicals, Inc.

Comparing urban solid waste recycling from the viewpoint of urban metabolism based on physical input-output model: A case of Suzhou in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang Sai, E-mail: liangsai09@gmail.com; Zhang Tianzhu, E-mail: zhangtz@mail.tsinghua.edu.cn

Highlights: Black-Right-Pointing-Pointer Impacts of solid waste recycling on Suzhou's urban metabolism in 2015 are analyzed. Black-Right-Pointing-Pointer Sludge recycling for biogas is regarded as an accepted method. Black-Right-Pointing-Pointer Technical levels of reusing scrap tires and food wastes should be improved. Black-Right-Pointing-Pointer Other fly ash utilization methods should be exploited. Black-Right-Pointing-Pointer Secondary wastes from reusing food wastes and sludge should be concerned. - Abstract: Investigating impacts of urban solid waste recycling on urban metabolism contributes to sustainable urban solid waste management and urban sustainability. Using a physical input-output model and scenario analysis, urban metabolism of Suzhou in 2015 is predicted and impactsmore » of four categories of solid waste recycling on urban metabolism are illustrated: scrap tire recycling, food waste recycling, fly ash recycling and sludge recycling. Sludge recycling has positive effects on reducing all material flows. Thus, sludge recycling for biogas is regarded as an accepted method. Moreover, technical levels of scrap tire recycling and food waste recycling should be improved to produce positive effects on reducing more material flows. Fly ash recycling for cement production has negative effects on reducing all material flows except solid wastes. Thus, other fly ash utilization methods should be exploited. In addition, the utilization and treatment of secondary wastes from food waste recycling and sludge recycling should be concerned.« less

The effect of strontium and barium doping on perovskite-structured energy materials for photovoltaic applications

NASA Astrophysics Data System (ADS)

Wu, Ming-Chung; Chen, Wei-Cheng; Chan, Shun-Hsiang; Su, Wei-Fang

2018-01-01

Perovskite solar cell is a novel photovoltaic technology with the superior progress in efficiency and the simple solution processes. Develop lead-free or lead-reduced perovskite materials is a significant concern for high-performance perovskite solar cell. Among the alkaline earth metals, the Sr2+ and Ba2+ are suitable for Pb2+ replacement in perovskite film due to fitting Goldschmidt's tolerance factor. In this study, we adopted Ba-doped and Sr-doped perovskite structured materials with different doping levels, including 1.0, 5.0, and 10.0 mol%, to prepare perovskite solar cells. Both Ba-doped and Sr-doped perovskite structured materials have a related tendency in absorption behavior and surface morphology. At 10.0 mol% doping level, the power conversion efficiency (PCE) of Sr-doped perovskite solar cells is only ∼0.5%, but the PCE of Ba-doped perovskite solar cells can be achieved to ∼9.7%. Ba-doped perovskite solar cells showed the acceptable photovoltaic characteristics than Sr-doped perovskite solar cells. Ba dopant can partially replace the amount of lead in the perovskite solar cells, and it could be a potential candidate in the field of lead-free or lead-reduced perovskite energy materials.

Two-level cervical corpectomy-long-term follow-up reveals the high rate of material failure in patients, who received an anterior approach only.

PubMed

Bayerl, Simon Heinrich; Pöhlmann, Florian; Finger, Tobias; Prinz, Vincent; Vajkoczy, Peter

2018-06-18

In contrast to a one-level cervical corpectomy, a multilevel corpectomy without posterior fusion is accompanied by a high material failure rate. So far, the adequate surgical technique for patients, who receive a two-level corpectomy, remains to be elucidated. The aim of this study was to determine the long-term clinical outcome of patients with cervical myelopathy, who underwent a two-level corpectomy. Outcome parameters of 21 patients, who received a two-level cervical corpectomy, were retrospectively analyzed concerning reoperations and outcome scores (VAS, Neck Disability Index (NDI), Nurick scale, modified Japanese Orthopaedic Association score (mJOAS), Short Form 36-item Health Survey Questionnaire (SF-36)). The failure rate was determined using postoperative radiographs. The choice over the surgical procedures was exercised by every surgeon individually. Therefore, a distinction between two groups was possible: (1) anterior group (ANT group) with a two-level corpectomy and a cervical plate, (2) anterior/posterior group (A/P group) with two-level corpectomy, cervical plate, and additional posterior fusion. Both groups benefitted from surgery concerning pain, disability, and myelopathy. While all patients of the A/P group showed no postoperative instability, one third of the patients of the ANT group exhibited instability and clinical deterioration. Thus, a revision surgery with secondary posterior fusion was needed. Furthermore, the ANT group had worse myelopathy scores (mJOAS ANT group  = 13.5 ± 2.5, mJOAS A/P group  = 15.7 ± 2.2). Patients with myelopathy, who receive a two-level cervical corpectomy, benefitted from surgical decompression. However, patients with a sole anterior approach demonstrated a very high rate of instability (33%) and clinical deterioration in a long-term follow-up. Therefore, we recommend to routinely perform an additional posterior fusion after two-level cervical corpectomy.

Mapping individuals' earthquake preparedness in China

NASA Astrophysics Data System (ADS)

Wu, Guochun; Han, Ziqiang; Xu, Weijin; Gong, Yue

2018-05-01

Disaster preparedness is critical for reducing potential impact. This paper contributes to current knowledge of disaster preparedness using representative national sample data from China, which faces high earthquake risks in many areas of the country. The adoption of earthquake preparedness activities by the general public, including five indicators of material preparedness and five indicators of awareness preparedness, were surveyed and 3245 respondents from all 31 provinces of Mainland China participated in the survey. Linear regression models and logit regression models were used to analyze the effects of potential influencing factors. Overall, the preparedness levels are not satisfied, with a material preparation score of 3.02 (1-5), and awareness preparation score of 2.79 (1-5), nationally. Meanwhile, residents from western China, which has higher earthquake risk, have higher degrees of preparedness. The concern for disaster risk reduction (DRR) and the concern for building safety and participation in public affairs are consistent positive predictors of both material and awareness preparedness. The demographic and socioeconomic variables' effects, such as gender, age, education, income, urban/rural division, and building size, vary according to different preparedness activities. Finally, the paper concludes with a discussion of the theoretical contribution and potential implementation.

Escaping the Ashby limit for mechanical damping/stiffness trade-off using a constrained high internal friction interfacial layer.

PubMed

Unwin, A P; Hine, P J; Ward, I M; Fujita, M; Tanaka, E; Gusev, A A

2018-02-06

The development of new materials with reduced noise and vibration levels is an active area of research due to concerns in various aspects of environmental noise pollution and its effects on health. Excessive vibrations also reduce the service live of the structures and limit the fields of their utilization. In oscillations, the viscoelastic moduli of a material are complex and it is their loss part - the product of the stiffness part and loss tangent - that is commonly viewed as a figure of merit in noise and vibration damping applications. The stiffness modulus and loss tangent are usually mutually exclusive properties so it is a technological challenge to develop materials that simultaneously combine high stiffness and high loss. Here we achieve this rare balance of properties by filling a solid polymer matrix with rigid inorganic spheres coated by a sub-micron layer of a viscoelastic material with a high level of internal friction. We demonstrate that this combination can be experimentally realised and that the analytically predicted behaviour is closely reproduced, thereby escaping the often termed 'Ashby' limit for mechanical stiffness/damping trade-off and offering a new route for manufacturing advanced composite structures with markedly reduced noise and vibration levels.

Concerns of anophthalmic patients-a comparison between cryolite glass and polymethyl methacrylate prosthetic eye wearers.

PubMed

Rokohl, Alexander C; Koch, Konrad R; Adler, Werner; Trester, Marc; Trester, Wolfgang; Pine, Nicola S; Pine, Keith R; Heindl, Ludwig M

2018-06-01

To compare the concerns of experienced cryolite glass and (poly)methyl methacrylate (PMMA) prosthetic eye wearers. One hundred six experienced cryolite glass and 63 experienced PMMA prosthetic eye wearers completed an anonymous questionnaire regarding general and specific prosthetic eye concerns at least 2 years after natural eye loss. From these independent anophthalmic populations, we identified 34 case-control pairs matched for the known influencing demographic variables of gender, occupation, age, and time since natural eye loss. The levels of concern were significantly lower in the cryolite glass group than those in the PMMA group for the following: loss of balance (p < 0.001), phantom sight vision (p < 0.001), pain (p < 0.001), receiving good advice (p = 0.001), fullness of orbit (p = 0.001), size (p = 0.007), direction of gaze relative to the healthy fellow eye (p = 0.005), eye lid contour (p = 0.037), comfort of the prosthetic eye (p < 0.001), colour relative to the healthy fellow eye (p < 0.001), and retention of the prosthetic eye (p < 0.001). Concerns about watering, crusting, discharge, visual perception, appearance, movement of the prosthetic eye, and health of the remaining eye were not significantly different between both groups. The results of this study showed that many general and specific levels of concern were significantly lower for cryolite glass prosthetic eye wearers than for PMMA prosthetic eye wearers. The question of why there are significant differences and to what extent the material of the prosthesis (cryolite glass or PMMA) has an impact on various concerns remains unanswered and should be addressed in a prospective comparative multicentre trial.

First-year survival and growth of three species assemblages planted on reclaimed mine land as affected by three levels of silvicultural intensity

Treesearch

Chad N. Casselman; Thomas R. Fox; James A. Burger

2006-01-01

Surface mined land in the Appalachian coal-producing region have been found to exhibit growing conditions that are unfavorable for the establishment of productive forests including dense ground covers, compacted soil materials, and unfavorable soil chemical properties. To address these concerns, a 3 x 3 x 3 factor random complete block experiment was used to...

Management Plans Technical Appendix - Phase 1 (Central Puget Sound). Volume 4

DTIC Science & Technology

1988-06-01

measure without substantially more samples and analysis or significantly reducing the desired confidence level . Consequently, the study participants...disposal occurs in ac- (9) An application and a lease fee will be charged at a cordance with permit conditions. Compliance measures rate sufficient to...site are sufficient to characterize the material. The bloassays are a cost effective measure of the biological effects of concern within the disposal

Dalit Movements in India and Dr. B. R. Ambedkar: An Introduction and an Annotated Bibliography. Fulbright-Hays Summer Seminars Abroad, 1997 (India).

ERIC Educational Resources Information Center

Ashley, George

This paper provides materials for a college level course concerning the peoples of contemporary India. The focus of the paper is on the dalits of India, those people formerly called untouchables, and efforts to improve their status. The outspoken advocate for the untouchable caste was Bhimrao Ramji Ambedkar (1891-1956). Born an untouchable,…

Development of an Assessment Method for Building Materials Under Euratom Scope.

PubMed

de With, Govert

2017-11-01

In 2013, the European Commission published its basic safety standards for protection against the dangers arising from exposure to ionizing radiation (Council Directive 2013/59/Euratom)-also known as EU-BSS. As a result, the use of raw materials with potentially elevated activity concentrations such as fly ash, phosphogypsum, and slags will now fall under EU-BSS scope when applied in building materials. In light of this new policy, a variety of tools are available to assess compliance with the 1-mSv y reference level for building materials. At the heart of these tools is a gamma-spectrometric determination of the naturally occurring radionuclides Ra, Th, and K in the material of concern. As a large number of construction products contain a certain amount of the raw material that falls under the scope of the EU regulation, this policy will lead to substantial measurement of building materials that pose little radiation risk. For this reason, a method is developed to enable assessment against the 1-mSv value not on the basis of gamma-spectrometric analysis but rather based on the product's material composition. The proposed method prescribes a maximum permitted content of raw materials with potentially elevated activity concentrations in terms of a weight percentage of the end product, where the raw materials of concern are defined as those listed in Annex XIII of the EU-BSS. The permitted content is a function of the product's surface density. Therefore, a product with a low surface density of up to 25 kg m can consist of nearly 100% raw materials with potentially elevated activity concentrations, and this percentage drops to around 15% for products with a surface density of around 500 kg m. Building materials that comply with these requirements on product composition are exempt from testing, while products that do not comply must perform regular gamma-spectrometric analysis. A full validation and testing of the method is provided. In addition, the paper discusses issues relevant for regulatory implementation.

Plastic behavior of polycrystalline copper at optical scales of deformation

NASA Astrophysics Data System (ADS)

Domber, Jeanette Leah

Microplasticity is permanent deformation that occurs below the proportional limit of a material. For precision deployable optical spacecraft, it is unknown how microplasticity will affect the performance of the precision structure. An examination of the rolling of thin film optical reflectors indicates a strong dependence of the post-deployed shape on the strain hardening exponent of the material. However, confirmation of the valid extension of the constitutive model used to predict the deployed shape to microscopic strain regimes is necessary. The primary objective of this thesis is threefold: determine the relationship between stress and strain at nano to microstrain levels for representative materials; determine if the relationship between microscopic and macroscopic plastic behavior can be accurately characterized by the Ramberg-Osgood strain hardening constitutive model with a single set of material parameters; and determine if dislocation motion is the root cause of microplastic behavior at room temperature. The test apparatus, with a dynamic force range of 40,000 to 1, measures strains from 0.01 to 1000 parts per million (ppm) of cylindrical amorphous quartz and cold-worked and annealed tempered polycrystalline copper specimen. Elastic behavior in all three materials was consistent with typical values. However, plastic responses were larger than expected. Stresses on the order of 10 to 10,000 kPa (1.45 to 1450 psi) produced permanent strain in all three types of materials ranging from 0.01 to 1 ppm, some of which was attributable to a systematic error in the measurement. Extrapolating macroplastic behavior to lower stress and strain values underestimates the amount of microplasticity observed in the material. Therefore, material property characterization is required at all strain levels that are of concern for a particular application. The similarity in the levels of measured permanent strain for a given stress level between the as-drawn and annealed copper is consistent with the observed dislocation substructure of the two materials, which is also similar. This uniformity indicates that microplastic behavior at room temperature is driven by dislocation glide.

The medical geochemistry of dusts, soils, and other Earth materials: Chapter 7

USGS Publications Warehouse

Plumlee, Geoffrey S.; Ziegler, Thomas L.

2003-01-01

A quick scan of newspapers, television, science magazines, or the internet on any given day has a fairly high likelihood of encountering stories (accompanied by headlines such as those above) regarding human health concerns linked to dusts, soils, or other Earth materials. Many such concerns have been recognized and studied for decades, but new concerns arise regularly.

Food and Population: A Global Concern [and] The Paradoxes of World Hunger.

ERIC Educational Resources Information Center

Murphy, Elaine M.

1984-01-01

Student and teacher materials are provided for a secondary unit on world hunger. The student materials are contained in a module entitled "Food and Population: A Global Concern," distributed with the newsletter "Interchange." The teacher materials are contained in the issue of the newsletter itself, subtitled "The Paradoxes of World Hunger." A…

A case study of one school system's adoption and implementation of an elementary science program

NASA Astrophysics Data System (ADS)

Kelly, Michael Patrick

2000-10-01

The researcher's purpose in this study was to examine the process used by the Minot Public Schools to adopt and implement a new elementary science program from Silver Burdett Ginn called Discovery Works. Using case study methods within a naturalistic design, the researcher investigated teachers' concerns as they adopted and implemented Discovery Works in their classrooms. Data were gathered using the Concerns Based Adoption Model (CBAM) instrument, interviews with adoption committee members, classroom teachers, grade level meetings, and document analysis of field notes related to each phase of the study. Content analysis methods were used to analyze the data. Emergent themes were presented and substantiated in the data, in terms of six research questions that guided this research. The data were analyzed both quantitatively and qualitatively to provide a rich, thick description that and enabled the researcher to confirm and triangulate the concerns of teachers in this study. The quantitative data revealed a general nonuser profile by teachers as they implemented Discovery Works. Three major themes of concerns emerged from a qualitative analysis of the data. The first theme was implementation, including issues related to teacher attitudes and inservice needs. The second theme, management issues, had five concerns subsumed within it. These included concerns related to time, materials, storage, reorder, and cooperative groups. The third theme, effects on students, included issues concerning hands-on methods of teaching science, vocabulary, especially at the upper elementary, and assessment issues. Possible solutions to resolve each of the concerns were presented. Major conclusions are that teacher concerns about Discovery Works were normal for any group experiencing a new innovation. Teachers and students enjoyed using the hands-on materials, and that Minot Public Schools has taken a small, but important step forward on the road to science education reform. Although there is still a strong emphasis on the language arts of science, as opposed to scientific inquiry, there has been increased learning of science content and the process skills necessary to do scientific inquiry. Recommendations were made for professional development activities that would assist teachers in the next phase of the implementation process.

Quality assessment of online patient education resources for peripheral neuropathy.

PubMed

Hansberry, David R; Suresh, Ragha; Agarwal, Nitin; Heary, Robert F; Goldstein, Ira M

2013-03-01

Given its practicality, the internet is a primary resource for patients afflicted with diseases like peripheral neuropathy. Therefore, it is important that the readily available online resources on peripheral neuropathy are tailored to the general public, particularly concerning readability. Patient education resources were downloaded from the US National Library of Medicine, Mayo Clinic, National Institute of Neurological Disorders and Stroke, Neuropathy.org, GBS/CIDP Foundation International, Hereditary Neuropathy Foundation, Charcot-Marie-Tooth Association, Foundation for Peripheral Neuropathy, and Neuropathy Action Foundation websites. All patient education material related to peripheral neuropathy was evaluated for its level of readability using the Flesch Reading Ease (FRE) and Flesch-Kincaid Grade Level. The FRE scores averaged 43.4 with only the US National Library of Medicine scoring above 60 (76.5). The Flesch-Kincaid Grade Level scores averaged 11.0. All scores were above a seventh-grade level except the US National Library of Medicine, which had a score of a fifth-grade reading level. Most Americans may not fully benefit from patient education resources concerning peripheral neuropathy education on many of the websites. Only the US National Library of Medicine, which is written at a fifth-grade level, is likely to benefit the average American. © 2013 Peripheral Nerve Society.

Op weg naar een didactiek voor natuurkunde-experimenten op afstand : Ontwerp en evaluatie van een via internet uitvoerbaar experiment voor leerlingen uit het voortgezet onderwijs

NASA Astrophysics Data System (ADS)

Engelbarts, M. B. A.

2009-02-01

The subject of this thesis is a developmental study on “remote experimenting” in education. It concerns the development of a remote experiment that enables pre-university students to carry out a physics experiment at a distance via the internet. Remote experiments can offer several (practical) benefits when compared to conventional experiments but the desire to exploit these benefits put special demands on the design of the experiment, since the students might be conducting the experiment without a teacher in the vicinity. As a consequence of these demands it was decided to focus on exploring the possibilities and problems of remote experiments conducted in the absence of a teacher. The research was carried out in two cycles and focused on the development of a remote experiment that could be conducted autonomously by pre-university students to measure the speed of light in several media. This should answer the global question: What should a technically, as well as didactically, well-functioning remote experiment look like? The first cycle had an explorative character. It showed that technically the experiment already functioned quite well. However, many problems were observed concerning the content, and the way the students were tackling it. This led to two categories of recommendations. Concerning the content, the material should aim at making the students more aware of what they are doing and why they are doing it and several content related problems needed to be avoided. The second category of recommendations concerned the format of the material: the design and the working method. Special attention should be paid to designing a clear structure for the website and adding interaction and control, (feedback- and reflection facilities) to activate the students and guide them through the material. In the second research cycle these recommendations were followed by designing the material within the theoretical framework of the problem posing theory. A didactical structure was designed before writing the actual lesson material for the website describing the inter-related conceptual and content-related motivational pathway of the intended teaching-learning process. The lesson material was set up in such a way that the students are repeatedly confronted with a practical problem to solve and they play an active role in developing the method of measurement. Secondly, in an attempt to compensate for the absence of the teacher and support the teaching-learning process some format elements were developed and deployed like an automated question-, and feedback system that supported the students, activated them and gave them insight into their learning process and a ‘Where-am-I’-window that showed their current position within the material. This all had led to a technically as well as didactically well functioning remote experiment in which, at a global level, the line of reasoning was made explicit and recognizable for the students, and ad a local level was build up out of well connected successive activities and required the students to adopt an active attitude.

Radiation Shielding Optimization on Mars

NASA Technical Reports Server (NTRS)

Slaba, Tony C.; Mertens, Chris J.; Blattnig, Steve R.

2013-01-01

Future space missions to Mars will require radiation shielding to be optimized for deep space transit and an extended stay on the surface. In deep space, increased shielding levels and material optimization will reduce the exposure from most solar particle events (SPE) but are less effective at shielding against galactic cosmic rays (GCR). On the surface, the shielding provided by the Martian atmosphere greatly reduces the exposure from most SPE, and long-term GCR exposure is a primary concern. Previous work has shown that in deep space, additional shielding of common materials such as aluminum or polyethylene does not significantly reduce the GCR exposure. In this work, it is shown that on the Martian surface, almost any amount of aluminum shielding increases exposure levels for humans. The increased exposure levels are attributed to neutron production in the shield and Martian regolith as well as the electromagnetic cascade induced in the Martian atmosphere. This result is significant for optimization of vehicle and shield designs intended for the surface of Mars.

Hydrogen Peroxide - Material Compatibility Studied by Microcalorimetry

NASA Technical Reports Server (NTRS)

Homung, Steven D.; Davis, Dennis D.; Baker, David; Popp, Christopher G.

2003-01-01

Environmental and toxicity concerns with current hypergolic propellants have led to a renewed interest in propellant grade hydrogen peroxide (HP) for propellant applications. Storability and stability has always been an issue with HP. Contamination or contact of HP with metallic surfaces may cause decomposition, which can result in the evolution of heat and gas leading to increased pressure or thermal hazards. The NASA Johnson Space Center White Sands Test Facility has developed a technique to monitor the decompositions of hydrogen peroxide at temperatures ranging from 25 to 60 C. Using isothermal microcalorimetry we have measured decomposition rates at the picomole/s/g level showing the catalytic effects of materials of construction. In this paper we will present the results of testing with Class 1 and 2 materials in 90 percent hydrogen peroxide.

Development of a reference material for routine performance monitoring of methods measuring polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls.

PubMed

Selliah, S S; Cussion, S; MacPherson, K A; Reiner, E J; Toner, D

2001-06-01

Matrix-matched environmental certified reference materials (CRMs) are one of the most useful tools to validate analytical methods, assess analytical laboratory performance and to assist in the resolution of data conflicts between laboratories. This paper describes the development of a lake sediment as a CRM for polychorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DLPCBs). The presence of DLPCBs in the environment is of increased concern and analytical methods are being developed internationally for monitoring DLPCBs in the environment. This paper also reports the results of an international interlaboratory study involving thirty-five laboratories from seventeen countries, conducted to characterize and validate levels of a sediment reference material for PCDDs, PCDFs and DLPCBs.

Micro-engineered first wall tungsten armor for high average power laser fusion energy systems

NASA Astrophysics Data System (ADS)

Sharafat, Shahram; Ghoniem, Nasr M.; Anderson, Michael; Williams, Brian; Blanchard, Jake; Snead, Lance; HAPL Team

2005-12-01

The high average power laser program is developing an inertial fusion energy demonstration power reactor with a solid first wall chamber. The first wall (FW) will be subject to high energy density radiation and high doses of high energy helium implantation. Tungsten has been identified as the candidate material for a FW armor. The fundamental concern is long term thermo-mechanical survivability of the armor against the effects of high temperature pulsed operation and exfoliation due to the retention of implanted helium. Even if a solid tungsten armor coating would survive the high temperature cyclic operation with minimal failure, the high helium implantation and retention would result in unacceptable material loss rates. Micro-engineered materials, such as castellated structures, plasma sprayed nano-porous coatings and refractory foams are suggested as a first wall armor material to address these fundamental concerns. A micro-engineered FW armor would have to be designed with specific geometric features that tolerate high cyclic heating loads and recycle most of the implanted helium without any significant failure. Micro-engineered materials are briefly reviewed. In particular, plasma-sprayed nano-porous tungsten and tungsten foams are assessed for their potential to accommodate inertial fusion specific loads. Tests show that nano-porous plasma spray coatings can be manufactured with high permeability to helium gas, while retaining relatively high thermal conductivities. Tungsten foams where shown to be able to overcome thermo-mechanical loads by cell rotation and deformation. Helium implantation tests have shown, that pulsed implantation and heating releases significant levels of implanted helium. Helium implantation and release from tungsten was modeled using an expanded kinetic rate theory, to include the effects of pulsed implantations and thermal cycles. Although, significant challenges remain micro-engineered materials are shown to constitute potential candidate FW armor materials.

Nordic dentists' opinions on the safety of amalgam and other dental restorative materials.

PubMed

Widström, E; Haugejorden, O; Sundberg, H; Birn, H

1993-08-01

The safety of amalgam and other restorative materials has caused concern among dental patients in recent years. The aim of this study was to obtain information on dentists' perceived competence in handling different filling materials and their opinions on the safety of these. A random sample of practising dentists in Denmark, Finland, Norway, and Sweden received a mail questionnaire in spring 1990. Answers were received from 1732 dentists (65%). The study showed that the respondents believed that their theoretic knowledge and clinical skills were generally at a high level regarding restorative materials. The risks of the side-effects of gold, ceramic materials, and glass ionomer were considered to be low by about 90% of the respondents. Amalgam was considered to be significantly more hazardous by the Swedish respondents than the others. Interestingly, composite was considered to be associated with a high risk of side-effects by about half of the dentists in all Nordic countries. The dentists' opinions were not found to be greatly influenced by their sex, age, or place of residence but rather by their country and service sector. Against the background of the present lack of scientific evidence on the hazardousness of amalgam or other restorative materials for patients' general health, these findings indicate that dentists are influenced by discussions in the mass media about dental treatment and materials and, of course, by the guidelines given by the health authorities in their own countries. Few dentists were shown to be concerned about occupational risks associated with the use of amalgam, and they had not had their own amalgam fillings replaced.(ABSTRACT TRUNCATED AT 250 WORDS)

Identification of Upper and Lower Level Yield Strength in Materials

PubMed Central

Valíček, Jan; Harničárová, Marta; Kopal, Ivan; Palková, Zuzana; Kušnerová, Milena; Panda, Anton; Šepelák, Vladimír

2017-01-01

This work evaluates the possibility of identifying mechanical parameters, especially upper and lower yield points, by the analytical processing of specific elements of the topography of surfaces generated with abrasive waterjet technology. We developed a new system of equations, which are connected with each other in such a way that the result of a calculation is a comprehensive mathematical–physical model, which describes numerically as well as graphically the deformation process of material cutting using an abrasive waterjet. The results of our model have been successfully checked against those obtained by means of a tensile test. The main prospect for future applications of the method presented in this article concerns the identification of mechanical parameters associated with the prediction of material behavior. The findings of this study can contribute to a more detailed understanding of the relationships: material properties—tool properties—deformation properties. PMID:28832526

Identification of Upper and Lower Level Yield Strength in Materials.

PubMed

Valíček, Jan; Harničárová, Marta; Kopal, Ivan; Palková, Zuzana; Kušnerová, Milena; Panda, Anton; Šepelák, Vladimír

2017-08-23

This work evaluates the possibility of identifying mechanical parameters, especially upper and lower yield points, by the analytical processing of specific elements of the topography of surfaces generated with abrasive waterjet technology. We developed a new system of equations, which are connected with each other in such a way that the result of a calculation is a comprehensive mathematical-physical model, which describes numerically as well as graphically the deformation process of material cutting using an abrasive waterjet. The results of our model have been successfully checked against those obtained by means of a tensile test. The main prospect for future applications of the method presented in this article concerns the identification of mechanical parameters associated with the prediction of material behavior. The findings of this study can contribute to a more detailed understanding of the relationships: material properties-tool properties-deformation properties.

Interactions between heavy metals and photosynthetic materials studied by optical techniques.

PubMed

Ventrella, Andrea; Catucci, Lucia; Piletska, Elena; Piletsky, Sergey; Agostiano, Angela

2009-11-01

In this work studies on rapid inhibitory interactions between heavy metals and photosynthetic materials at different organization levels were carried out by optical assay techniques, investigating the possibility of applications in the heavy metal detection field. Spinach chloroplasts, thylakoids and Photosystem II proteins were employed as biotools in combination with colorimetric assays based on dichlorophenol indophenole (DCIP) photoreduction and on fluorescence emission techniques. It was found that copper and mercury demonstrated a strong and rapid photosynthetic activity inhibition, that varied from proteins to membranes, while other metals like nickel, cobalt and manganese produced only slight inhibition effects on all tested photosynthetic materials. By emission measurements, only copper was found to rapidly influence the photosynthetic material signals. These findings give interesting information about the rapid effects of heavy metals on isolated photosynthetic samples, and are in addition to the literature data concerning the effects of growth in heavy metal enriched media.

Evaluation of In-Package Performance of Antistatic Materials. Phase 2

DTIC Science & Technology

1982-01-01

voltage levels were anticipated from those observed in Phase I due to the greater mobility of test pouches resulting from established resonances of...this report refers to the point at which greatest sensor mobility occurs within a typical test pack as evidenced by a rapid increase in static charge...data were not recorded but there should be cause for concern in such future aplications . Polyvinylchloride (PVC) film particularly showed danqerous

USSR Report, Military Affairs, No. 1741, Aviatsiya I Kosmonavtika, No. 9, September 1982.

DTIC Science & Technology

1983-02-10

material base, the scientific and pedagogical knowledge of the professors and instructors, the training level of the students and their ability to...scientific- pedagogical maturity. As a rule our graduates must do their professional work with very little time to spare. This requires a creative...concerning the party’s domestic and foreign policy, Soviet military development and art, mili- tary pedagogics and aviation psychology, improvement of

Materials, processes, and environmental engineering network

NASA Technical Reports Server (NTRS)

White, Margo M.

1993-01-01

The Materials, Processes, and Environmental Engineering Network (MPEEN) was developed as a central holding facility for materials testing information generated by the Materials and Processes Laboratory. It contains information from other NASA centers and outside agencies, and also includes the NASA Environmental Information System (NEIS) and Failure Analysis Information System (FAIS) data. Environmental replacement materials information is a newly developed focus of MPEEN. This database is the NASA Environmental Information System, NEIS, which is accessible through MPEEN. Environmental concerns are addressed regarding materials identified by the NASA Operational Environment Team, NOET, to be hazardous to the environment. An environmental replacement technology database is contained within NEIS. Environmental concerns about materials are identified by NOET, and control or replacement strategies are formed. This database also contains the usage and performance characteristics of these hazardous materials. In addition to addressing environmental concerns, MPEEN contains one of the largest materials databases in the world. Over 600 users access this network on a daily basis. There is information available on failure analysis, metals and nonmetals testing, materials properties, standard and commercial parts, foreign alloy cross-reference, Long Duration Exposure Facility (LDEF) data, and Materials and Processes Selection List data.

Atomic Oxygen Task

NASA Technical Reports Server (NTRS)

Hadaway, James B.

1997-01-01

This report details work performed by the Center for Applied Optics (CAO) at the University of Alabama in Huntsville (UAH) on the contract entitled 'Atomic Oxygen Task' for NASA's Marshall Space Flight Center (contract NAS8-38609, Delivery Order 109, modification number 1). Atomic oxygen effects on exposed materials remain a critical concern in designing spacecraft to withstand exposure in the Low Earth Orbit (LEO) environment. The basic objective of atomic oxygen research in NASA's Materials & Processes (M&P) Laboratory is to provide the solutions to material problems facing present and future space missions. The objective of this work was to provide the necessary research for the design of specialized experimental test configurations and development of techniques for evaluating in-situ space environmental effects, including the effects of atomic oxygen and electromagnetic radiation on candidate materials. Specific tasks were performed to address materials issues concerning accelerated environmental testing as well as specifically addressing materials issues of particular concern for LDEF analysis and Space Station materials selection.

In search of standards to support circularity in product policies: A systematic approach.

PubMed

Tecchio, Paolo; McAlister, Catriona; Mathieux, Fabrice; Ardente, Fulvio

2017-12-01

The aspiration of a circular economy is to shift material flows toward a zero waste and pollution production system. The process of shifting to a circular economy has been initiated by the European Commission in their action plan for the circular economy. The EU Ecodesign Directive is a key policy in this transition. However, to date the focus of access to market requirements on products has primarily been upon energy efficiency. The absence of adequate metrics and standards has been a key barrier to the inclusion of resource efficiency requirements. This paper proposes a framework to boost sustainable engineering and resource use by systematically identifying standardization needs and features. Standards can then support the setting of appropriate material efficiency requirements in EU product policy. Three high-level policy goals concerning material efficiency of products were identified: embodied impact reduction, lifetime extension and residual waste reduction. Through a lifecycle perspective, a matrix of interactions among material efficiency topics (recycled content, re-used content, relevant material content, durability, upgradability, reparability, re-manufacturability, reusability, recyclability, recoverability, relevant material separability) and policy goals was created. The framework was tested on case studies for electronic displays and washing machines. For potential material efficiency requirements, specific standardization needs were identified, such as adequate metrics for performance measurements, reliable and repeatable tests, and calculation procedures. The proposed novel framework aims to provide a method by which to identify key material efficiency considerations within the policy context, and to map out the generic and product-specific standardisation needs to support ecodesign. Via such an approach, many different stakeholders (industry, academics, policy makers, non-governmental organizations etc.) can be involved in material efficiency standards and regulations. Requirements and standards concerning material efficiency would compel product manufacturers, but also help designers and interested parties in addressing the sustainable resource use issue.

Presence and leaching of bisphenol a (BPA) from dental materials.

PubMed

Becher, Rune; Wellendorf, Hanne; Sakhi, Amrit Kaur; Samuelsen, Jan Tore; Thomsen, Cathrine; Bølling, Anette Kocbach; Kopperud, Hilde Molvig

2018-01-01

BPA has been reported to leach from some resin based dental restorative materials and materials used for orthodontic treatment. To confirm and update previous findings, especially in light of the new temporary lower threshold value for tolerable daily BPA intake, we have investigated the leaching of BPA from 4 composite filling materials, 3 sealants and 2 orthodontic bonding materials. The materials were either uncured and dissolved in methanol or cured. The cured materials were kept in deionized water for 24 hours or 2 weeks. Samples were subsequently analyzed by ultra-performance liquid chromatography coupled to mass spectrometry (UPLC-MS-MS). The composite filling material Tetric EvoFlow ® and the fissure sealant DELTON ® showed significantly higher levels of BPA leaching compared to control samples for all test conditions (uncured, 24 h leaching and 2 weeks leaching). There were no significant differences in amount of leached BPA for any of the tested materials after 24 hours compared to 2 weeks. These results show that BPA is still released from some dental materials despite the general concern about potential adverse effects of BPA. However, the amounts of BPA were relatively low and most likely represent a very small contribution to the total BPA exposure.

Alternative Housing System & Materials Criteria For Land Subsidence Area (Case Study: Bandarharjo, Semarang)

NASA Astrophysics Data System (ADS)

Saharom, N. S.; Diana, S. C.; Kusyala, D.

2018-05-01

The critical land subsidence at rate 10cm per year happening in Bandarharjo district of Semarang is a big concern for the local community. With the increasing number of population, the building load increases as well thus could be one of the factors that hasten the land subsidence process. This phenomena causes the locals to spend a lot on house renovation and repairment. To keep up with the road level increased by the government, they had to increase their house floor level. Some demolished and rebuilt their houses. This paper seek to study the ideal criteria of alternative housing systems and materials that is adaptable for land subsidence and flood situation in Semarang by reference research methodology which various papers and guidelines of construction system based on the context of Bandarharjo. The existing housing material and system needs to be strategised for more affordable and adaptable housing system. Although there are already adaptation responses towards these natural disasters by the local communities but the responses are without the awareness about the ideal house system and materials that that helps them to adapt and live with natural disaster in a sustainable and more durable system.

Hard times, hard choices: founding bioethics today.

PubMed

Gracia, Diego

1995-07-01

The discussions of these past twenty years have significantly improved our knowledge about the foundation of bioethics and the meaning of the four bioethical principles with concern to at least three different points: that they are organised hierarchically, and therefore not "prima facie" of the same level; that they have exceptions, and consequently lack of absolute character; and that they are neither strictly deontological nor purely teleological. The only absolute principle of moral life can be the abstract and unconcrete respect of human beings. But when determining the material content of this respect, principles become contingent and relative. Therefore, moral reasoning must have necessarily no less than three moments, one absolute but merely formal, namely respect for all human beings, and the other two relative and material. The first material moment is comprised of the four bioethical principles, divided into two levels, one private, including the principles of autonomy and beneficence, and the other one public, including those of nonmaleficence and justice. The second material moment deals with specific cases, and requires analysis of their context, including their circumstances and consequences. Only when following these steps, and therefore balancing principlism and contextualism, can moral reasoning be correct and complete.

Nanotechnology: An Untapped Resource for Food Packaging.

PubMed

Sharma, Chetan; Dhiman, Romika; Rokana, Namita; Panwar, Harsh

2017-01-01

Food commodities are packaged and hygienically transported to protect and preserve them from any un-acceptable alteration in quality, before reaching the end-consumer. Food packaging continues to evolve along-with the innovations in material science and technology, as well as in light of consumer's demand. Presently, the modern consumers of competitive economies demands for food with natural quality, assured safety, minimal processing, extended shelf-life and ready-to-eat concept. Innovative packaging systems, not only ascertains transit preservation and effective distribution, but also facilitates communication at the consumer levels. The technological advances in the domain of food packaging in twenty-first century are mainly chaired by nanotechnology, the science of nano-materials. Nanotechnology manipulates and creates nanometer scale materials, of commercial and scientific relevance. Introduction of nanotechnology in food packaging sector has significantly addressed the food quality, safety and stability concerns. Besides, nanotechnology based packaging intimate's consumers about the real time quality of food product. Additionally, nanotechnology has been explored for controlled release of preservatives/antimicrobials, extending the product shelf life within the package. The promising reports for nanotechnology interventions in food packaging have established this as an independent priority research area. Nanoparticles based food packages offer improved barrier and mechanical properties, along with food preservation and have gained welcoming response from market and end users. In contrary, recent advances and up-liftment in this area have raised various ethical, environmental and safety concerns. Policies and regulation regarding nanoparticles incorporation in food packaging are being reviewed. This review presents the existing knowledge, recent advances, concerns and future applications of nanotechnology in food packaging sector.

Nanotechnology: An Untapped Resource for Food Packaging

PubMed Central

Sharma, Chetan; Dhiman, Romika; Rokana, Namita; Panwar, Harsh

2017-01-01

Food commodities are packaged and hygienically transported to protect and preserve them from any un-acceptable alteration in quality, before reaching the end-consumer. Food packaging continues to evolve along-with the innovations in material science and technology, as well as in light of consumer's demand. Presently, the modern consumers of competitive economies demands for food with natural quality, assured safety, minimal processing, extended shelf-life and ready-to-eat concept. Innovative packaging systems, not only ascertains transit preservation and effective distribution, but also facilitates communication at the consumer levels. The technological advances in the domain of food packaging in twenty-first century are mainly chaired by nanotechnology, the science of nano-materials. Nanotechnology manipulates and creates nanometer scale materials, of commercial and scientific relevance. Introduction of nanotechnology in food packaging sector has significantly addressed the food quality, safety and stability concerns. Besides, nanotechnology based packaging intimate's consumers about the real time quality of food product. Additionally, nanotechnology has been explored for controlled release of preservatives/antimicrobials, extending the product shelf life within the package. The promising reports for nanotechnology interventions in food packaging have established this as an independent priority research area. Nanoparticles based food packages offer improved barrier and mechanical properties, along with food preservation and have gained welcoming response from market and end users. In contrary, recent advances and up-liftment in this area have raised various ethical, environmental and safety concerns. Policies and regulation regarding nanoparticles incorporation in food packaging are being reviewed. This review presents the existing knowledge, recent advances, concerns and future applications of nanotechnology in food packaging sector. PMID:28955314

Video Preservation and Digital Reformatting: Pain and Possibility

ERIC Educational Resources Information Center

McDonough, Jerome; Jimenez, Mona

2006-01-01

The digital library community is increasingly concerned with long-term preservation of digital materials. This concern presents an opportunity for strategic alliances between digital library units and preservation departments confronting the difficulties inherent in preservation reformatting of moving image materials. However, successful…

Biomass production chamber air analysis of wheat study (BWT931)

NASA Technical Reports Server (NTRS)

Batten, J. H.; Peterson, B. V.; Berdis, E.; Wheeler, E. M.

1993-01-01

NASA's Controlled Ecological Life Support System (CELSS) biomass production chamber at John F. Kennedy Space Center provides a test bed for bioregenerative studies using plants to provide food, oxygen, carbon dioxide removal, and potable water to humans during long term space travel. Growing plants in enclosed environments has brought about concerns regarding the level of volatile organic compounds (VOC's) emitted from plants and the construction materials that make up the plant growth chambers. In such closed systems, the potential exists for some VOC's to reach toxic levels and lead to poor plant growth, plant death, or health problems for human inhabitants. This study characterized the air in an enclosed environment in which wheat cv. Yocora Rojo was grown. Ninty-four whole air samples were analyzed by gas chromatography/mass spectrometry throughout the eighty-four day planting. VOC emissions from plants and materials were characterized and quantified.

Effects of chemical disinfectant solutions on the stability and accuracy of the dental impression complex.

PubMed

Rios, M P; Morgano, S M; Stein, R S; Rose, L

1996-10-01

Currently available impression materials were not designed for disinfection or sterilization, and it is conceivable that disinfectants may adversely affect impressions. This study evaluated the accuracy and dimensional stability of polyether (Permadyne/Impregum) and polyvinyl siloxane (Express) impression materials retained by their adhesives in two different acrylic resin tray designs (perforated and nonperforated) when the materials were immersed for either 30 or 60 minutes in three high-level disinfectants. Distilled water and no solution served as controls. A stainless steel test analog similar to ADA specification No. 19 was used. A total of 400 impressions were made with all combinations of impression materials, tray designs, disinfectant, and soaking times. Samples were evaluated microscopically before and after immersion and 48 hours after soaking. Results indicated that these two impression materials were dimensionally stable. Because the results emphasized the stability and accuracy of the impression complex under various conditions, dentists can perform disinfection procedures similar to the protocol of this study without concern for clinically significant distortion of the impression.

Neutron-Irradiated Samples as Test Materials for MPEX

DOE PAGES

Ellis, Ronald James; Rapp, Juergen

2015-10-09

Plasma Material Interaction (PMI) is a major concern in fusion reactor design and analysis. The Material-Plasma Exposure eXperiment (MPEX) will explore PMI under fusion reactor plasma conditions. Samples with accumulated displacements per atom (DPA) damage produced by fast neutron irradiations in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) will be studied in the MPEX facility. This paper presents assessments of the calculated induced radioactivity and resulting radiation dose rates of a variety of potential fusion reactor plasma-facing materials (such as tungsten). The scientific code packages MCNP and SCALE were used to simulate irradiation of themore » samples in HFIR including the generation and depletion of nuclides in the material and the subsequent composition, activity levels, gamma radiation fields, and resultant dose rates as a function of cooling time. A challenge of the MPEX project is to minimize the radioactive inventory in the preparation of the samples and the sample dose rates for inclusion in the MPEX facility.« less

Toward a more materialistic medicine: the value of authentic materialism within current and future medical practice.

PubMed

Leder, Drew; Krucoff, Mitchell W

2011-09-01

Modern medicine is often accused by diverse critics of being "too materialistic" and therefore insufficiently holistic and effective. Yet, this critique can be misleading, dependent upon the ambiguous meanings of "materialism." The term can refer to the prevalence of financial concerns in driving medical practice. Alternatively, it can refer to "mechanistic materialism," the patient viewed as a body-machine. In each case, this article shows that this represents not authentic "materialism" at play, but a focus upon high-level abstractions. "Bottom-line" financial or diagnostic numbers can distract practitioners from the embodied needs of sick patients. In this sense, medical practice is not materialist enough. Through a series of clinical examples, this article explores how an authentic materialism would look in current and future practice. The article examines the use of prayer/comfort shawls at the bedside; hospitals and nursing homes redesigned as enriched healing environments; and a paradigmatic medical device--the implantable cardioverter defibrillator--as it might be presented to patients, in contrast to current practice.

A case study of three Puerto Rico-Statewide Systemic Initiative intermediate science teachers' views on and use of performance assessment

NASA Astrophysics Data System (ADS)

Pico, Rene Antonio, II

The purpose of this study was to investigate how teachers perceived and used performance assessment in the science classroom. Ms. Sanchez, Mrs. Irizarry, and Mrs. Bonnin, seventh grade teachers, participated in the study. Five research questions regarding the use of performance assessment were generated from these areas of inquiry: (a) teachers' views, (b) teachers' concerns, (c) teachers' level of use, (d) teachers' perceived facilitators, and (e) teachers' perceived barriers. Qualitative research methodologies were employed to collect and analyze the data. These included the use of informal interviews, a demographic survey, the Stage of Concern Questionnaire (Hall, George and Rutherford, 1979), the Level of Use Interview protocol (Loucks et al., 1975) and the study of artifacts. Performance assessment was defined by the three teachers as a dynamic process requiring the use of manipulatives in which students are involved as working participants in their own learning. Mrs. Irizarry and Mrs. Bonnin, described performance assessment with a broader range of possible executions, implying the use of tasks that allowed teachers to observe student behavior ranging from simple written responses to work collected over time. Ms. Sanchez defined assessment mainly on the basis of the use of equipment, instruments and materials in science. Ms. Sanchez reflected low intensity in the Levels of Concerns (Hall, George and Rutherford, 1979), suggesting that she felt at ease when working with performance assessment. Mrs. Irizarry and Mrs. Bonnin reflected definite commitment with the innovation. A major similarity was found in the areas of Refocusing (SoC 6), and Collaboration (SoC 5) denoting an interest in exploring and trying new alternatives. Ms. Sanchez and Mrs. Bonnin demonstrated characteristics of a well established routine or pattern in the Level of Use (Loucks et al., 1975) of performance assessment, while Mrs. Irizarry explored alternatives further and established a stronger process of modification. Two major facilitators to the use of performance assessment were perceived: (a) the provision of equipment and materials by the project; and (b) the support of colleagues. Two major barriers were perceived: (a) the time required to implement the tasks; and (b) the students' lack of knowledge and experience executing tasks.

Controlling radiation fields in siemans designed light water reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riess, R.; Marchl, T.

1995-03-01

An essential item for the control of radiation fields is the minimization of the use of satellites in the reactor systems of Light Water Reactors (LWRs). A short description of the qualification of Co-replacement materials will be followed by an illustration of the locations where these materials were implemented in Siemens designed LWRs. Especially experiences in PWRs show the immense influence of reduction of cobalt sources on dose rate buildup. The corrosion and the fatique and wear behavior of the replacement materials has not created concern up to now. A second tool to keep occupational radiation doses at a lowmore » level in PWRs is the use of the modified B/Li-chemistry. This is practized in Siemens designed plants by keeping the Li level at a max. value of 2 ppm until it reaches a pH (at 300{degrees}C) of {approximately}7.4. This pH is kept constant until the end of the cycle. The substitution of cobalt base alloys and thus the removal of the Co-59 sources from the system had the largest impact on the radiation levels. Nonetheless, the effectiveness of the coolant chemistry should not be neglected either. Several years of successful operation of PWRs with the replacement materials resulted in an occupational radiation exposure which is below 0.5 man-Sievert/plant and year.« less

Calibrating the response to health warnings: limiting both overreaction and underreaction with self-affirmation.

PubMed

Griffin, Dale W; Harris, Peter R

2011-05-01

Self-affirmation, reflecting on one's defining personal values, increases acceptance of threatening information, but does it do so at the cost of inducing undue alarm in people at low risk of harm? We contrast an alarm model, wherein self-affirmation simply increases response to threat, with a calibration model, wherein self-affirmation increases sensitivity to the self-relevance of health-risk information. Female seafood consumers (N = 165) completed a values self-affirmation or control task before reading a U.S. Food and Drug Administration brochure on mercury in seafood. Findings support the calibration model: Among frequent seafood consumers, self-affirmation generally increased concern (reports of depth of thought, personal message relevance, perceived risk, and negative affect) for those high in defensiveness and reduced it for those low in defensiveness. Among infrequent consumers of seafood, self-affirmation typically reduced concern. Thus, self-affirmation increased the sensitivity with which women at different levels of risk, and at different levels of defensiveness, responded cognitively and affectively to the materials.

A Strategy for Maintenance of the Long-Term Performance Assessment of Immobilized Low-Activity Waste Glass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, Joseph V.; Freedman, Vicky L.

2016-09-28

Approximately 50 million gallons of high-level radioactive mixed waste has accumulated in 177 buried single- and double-shell tanks at the Hanford Site in southeastern Washington State as a result of the past production of nuclear materials, primarily for defense uses. The United States Department of Energy (DOE) is proceeding with plans to permanently dispose of this waste. Plans call for separating the tank waste into high-level waste (HLW) and low-activity waste (LAW) fractions, which will be vitrified at the Hanford Waste Treatment and Immobilization Plant (WTP). Principal radionuclides of concern in LAW are 99Tc, 129I, and U, while non-radioactive contaminantsmore » of concern are Cr and nitrate/nitrite. HLW glass will be sent off-site to an undetermined federal site for deep geological disposal while the much larger volume of immobilized low-activity waste will be placed in the on-site, near-surface Integrated Disposal Facility (IDF).« less

NORM regulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, P.

1997-02-01

The author reviews the question of regulation for naturally occuring radioactive material (NORM), and the factors that have made this a more prominent concern today. Past practices have been very relaxed, and have often involved very poor records, the involvment of contractors, and the disposition of contaminated equipment back into commercial service. The rationale behind the establishment of regulations is to provide worker protection, to exempt low risk materials, to aid in scrap recycling, to provide direction for remediation and to examine disposal options. The author reviews existing regulations at federal and state levels, impending legislation, and touches on themore » issue of site remediation and potential liabilities affecting the release of sites contaminated by NORM.« less

Thermodynamic potential of free energy for thermo-elastic-plastic body

NASA Astrophysics Data System (ADS)

Śloderbach, Z.; Pająk, J.

2018-01-01

The procedure of derivation of thermodynamic potential of free energy (Helmholtz free energy) for a thermo-elastic-plastic body is presented. This procedure concerns a special thermodynamic model of a thermo-elastic-plastic body with isotropic hardening characteristics. The classical thermodynamics of irreversible processes for material characterized by macroscopic internal parameters is used in the derivation. Thermodynamic potential of free energy may be used for practical determination of the level of stored energy accumulated in material during plastic processing applied, e.g., for industry components and other machinery parts received by plastic deformation processing. In this paper the stored energy for the simple stretching of austenitic steel will be presented.

Environmental, health and safety assessment of photovoltaics

NASA Technical Reports Server (NTRS)

Rose, E. C.

1983-01-01

The environmental, health, and safety (E, H and S) concerns associated with the fabrication, deployment, and decommissioning of photovoltaic (PV) systems in terrestial applications are identified and assessed. Discussion is limited to crystalline silicon technologies. The primary E, H, and S concerns that arise during collector fabrication are associated with occupational exposure to materials of undetermined toxicity or to materials that are known to be hazardous, but for which process control technology may be inadequate. Stricter exposure standards are anticipated for some materials and may indicate a need for further control technology development. Minimizing electric shock hazards is a significant concern during system construction, operation and maintenance, and decommissioning.

Nanotechnology Applications in Functional Foods; Opportunities and Challenges.

PubMed

Singh, Harjinder

2016-03-01

Increasing knowledge on the link between diet and human health has generated a lot of interest in the development of functional foods. However, several challenges, including discovering of beneficial compounds, establishing optimal intake levels, and developing adequate food delivering matrix and product formulations, need to be addressed. A number of new processes and materials derived from nanotechnology have the potential to provide new solutions in many of these fronts. Nanotechnology is concerned with the manipulation of materials at the atomic and molecular scales to create structures that are less than 100 nm in size in one dimension. By carefully choosing the molecular components, it seems possible to design particles with different surface properties. Several food-based nanodelivery vehicles, such as protein-polysaccharide coacervates, multiple emulsions, liposomes and cochleates have been developed on a laboratory scale, but there have been very limited applications in real food systems. There are also public concerns about potential negative effects of nanotechnology-based delivery systems on human health. This paper provides an overview of the new opportunities and challenges for nanotechnology-based systems in future functional food development.

Review on fluoride-releasing restorative materials--fluoride release and uptake characteristics, antibacterial activity and influence on caries formation.

PubMed

Wiegand, Annette; Buchalla, Wolfgang; Attin, Thomas

2007-03-01

The purpose of this article was to review the fluoride release and recharge capabilities, and antibacterial properties, of fluoride-releasing dental restoratives, and discuss the current status concerning the prevention or inhibition of caries development and progression. Information from original scientific full papers or reviews listed in PubMed (search term: fluoride release AND (restorative OR glass-ionomer OR compomer OR polyacid-modified composite resin OR composite OR amalgam)), published from 1980 to 2004, was included in the review. Papers dealing with endodontic or orthodontic topics were not taken into consideration. Clinical studies concerning secondary caries development were only included when performed in split-mouth design with an observation period of at least three years. Fluoride-containing dental materials show clear differences in the fluoride release and uptake characteristics. Short- and long-term fluoride releases from restoratives are related to their matrices, setting mechanisms and fluoride content and depend on several environmental conditions. Fluoride-releasing materials may act as a fluoride reservoir and may increase the fluoride level in saliva, plaque and dental hard tissues. However, clinical studies exhibited conflicting data as to whether or not these materials significantly prevent or inhibit secondary caries and affect the growth of caries-associated bacteria compared to non-fluoridated restoratives. Fluoride release and uptake characteristics depend on the matrices, fillers and fluoride content as well as on the setting mechanisms and environmental conditions of the restoratives. Fluoride-releasing materials, predominantly glass-ionomers and compomers, did show cariostatic properties and may affect bacterial metabolism under simulated cariogenic conditions in vitro. However, it is not proven by prospective clinical studies whether the incidence of secondary caries can be significantly reduced by the fluoride release of restorative materials.

Potential of Organic Matrix Composites for Liquid Oxygen Tank

NASA Technical Reports Server (NTRS)

Davis, Samuel E.; Herald, Stephen D.; Stolzfus, Joel M.; Engel, Carl D.; Bohlen, James W.; Palm, Tod; Robinson, Michael J.

2005-01-01

Composite materials are being considered for the tankage of cryogenic propellants in access to space because of potentially lower structural weights. A major hurdle for composites is an inherent concern about the safety of using flammable structural materials in contact with liquid and gaseous oxygen. A hazards analysis approach addresses a series of specific concerns that must be addressed based upon test data. Under the 2nd Generation Reusable Launch Vehicle contracts, testing was begun for a variety of organic matrix composite materials both to aid in the selection of materials and to provide needed test data to support hazards analyses. The work has continued at NASA MSFC and the NASA WSTF to provide information on the potential for using composite materials in oxygen systems. Appropriate methods for oxygen compatibility testing of structural materials and data for a range of composite materials from impact, friction, flammability and electrostatic discharge testing are presented. Remaining concerns and conclusions about composite tank structures, and recommendations for additional testing are discussed. Requirements for system specific hazards analysis are identified.

How accelerated biological aging can affect solar reflective polymeric based building materials

NASA Astrophysics Data System (ADS)

Ferrari, C.; Santunione, G.; Libbra, A.; Muscio, A.; Sgarbi, E.

2017-11-01

Among the main issues concerning building materials, in particular outdoor ones, one can identify the colonization by microorganisms referred to as biological aggression. This can affect not only the aesthetical aspect but also the thermal performance of solar reflective materials. In order to improve the reliability of tests aimed to assess the resistance to biological aggression and contextually reduce the test duration, an accelerated test method has been developed. It is based on a lab reproducible setup where specific and controlled environmental and boundary conditions are imposed to accelerate as much as possible biological growth on building materials. Due to their widespread use, polymeric materials have been selected for the present analysis, in the aim of reaching an advanced bio-aged level in a relatively short time (8 weeks or less) and at the same time comparatively evaluate different materials under a given set of ageing conditions. Surface properties before, during and after ageing have been investigated by surface, microstructural and chemical analyses, as well as by examination of time progressive images to assess bacterial and algal growth rate.

People v. Larson: Drugs, Schools, and the Law.

ERIC Educational Resources Information Center

Chrystie, Richard; Jaffe, Geraldine

These instructional materials involve secondary students in simulating a criminal case concerning drug abuse. Included are all materials necessary for participation in the 1983 California State Mock Trial Competition. Part I of the document contains a hypothetical situation concerning legal and ethical aspects of drug abuse and drug trafficking on…

The influence of the free space environment on the superlight-weight thermal protection system: conception, methods, and risk analysis

NASA Astrophysics Data System (ADS)

Yatsenko, Vitaliy; Falchenko, Iurii; Fedorchuk, Viktor; Petrushynets, Lidiia

2016-07-01

This report focuses on the results of the EU project "Superlight-weight thermal protection system for space application (LIGHT-TPS)". The bottom line is an analysis of influence of the free space environment on the superlight-weight thermal protection system (TPS). This report focuses on new methods that based on the following models: synergetic, physical, and computational. This report concentrates on four approaches. The first concerns the synergetic approach. The synergetic approach to the solution of problems of self-controlled synthesis of structures and creation of self-organizing technologies is considered in connection with the super-problem of creation of materials with new functional properties. Synergetics methods and mathematical design are considered according to actual problems of material science. The second approach describes how the optimization methods can be used to determine material microstructures with optimized or targeted properties. This technique enables one to find unexpected microstructures with exotic behavior (e.g., negative thermal expansion coefficients). The third approach concerns the dynamic probabilistic risk analysis of TPS l elements with complex characterizations for damages using a physical model of TPS system and a predictable level of ionizing radiation and space weather. Focusing is given mainly on the TPS model, mathematical models for dynamic probabilistic risk assessment and software for the modeling and prediction of the influence of the free space environment. The probabilistic risk assessment method for TPS is presented considering some deterministic and stochastic factors. The last approach concerns results of experimental research of the temperature distribution on the surface of the honeycomb sandwich panel size 150 x 150 x 20 mm at the diffusion welding in vacuum are considered. An equipment, which provides alignment of temperature fields in a product for the formation of equal strength of welded joints is considered. Many tasks in computational materials science can be posed as optimization problems. This technique enables one to find unexpected microstructures with exotic behavior (e.g., negative thermal expansion coefficients). The last approach is concerned with the generation of realizations of materials with specified but limited microstructural information: an intriguing inverse problem of both fundamental and practical importance. Computational models based upon the theories of molecular dynamics or quantum mechanics would enable the prediction and modification of fundamental materials properties. This problem is solved using deterministic and stochastic optimization techniques. The main optimization approaches in the frame of the EU project "Superlight-weight thermal protection system for space application" are discussed. Optimization approach to the alloys for obtaining materials with required properties using modeling techniques and experimental data will be also considered. This report is supported by the EU project "Superlight-weight thermal protection system for space application (LIGHT-TPS)"

Recent progress concerning the production of controlled highly oriented electrospun nanofibrous arrays

NASA Astrophysics Data System (ADS)

Manea, L. R.; Hristian, L.; Leon, A. L.; Popa, A.

2016-08-01

Among the foreground domains of all the research-development programs at national and international level, a special place is occupied by that concerning the nanosciences, nanotechnologies, new materials and technologies. Electrospinning found a well-deserved place in this space, offering the preparation of nanomaterials with distinctive properties and applications in medicine, environment, photonic sensors, filters, etc. These multiple applications are generated by the fact that the electrospinning technology makes available the production of nanofibers with controllable characteristics (length, porosity, density, and mechanical characteristics), complexity and architecture. The apparition of 3D printing technology favors the production of complex nanofibrous structures, controlled assembly, self-assembly of electrospun nanofibers for the production of scaffolds used in various medical applications. The architecture of fibrous deposits has a special influence on the subsequent development of the cells of the reconstructed organism. The present work proposes to study of recent progress concerning the production of controlled highly oriented electrospun nanofibrous arrays and progress in research on the production of complex 2D and 3D structures.

Cohort change and the diffusion of environmental concern: A cross-national analysis

PubMed Central

Nawrotzki, Raphael J.; Pampel, Fred C.

2013-01-01

This study explores value change across cohorts for a multinational population sample. Employing a diffusion-of-innovations approach, we combine competing theories predicting the relationship between socio-economic status (SES) and environmentalism: post-materialism and affluence theories, and global environmentalism theory. The diffusion argument suggests that high-SES groups first adopt pro-environmental views, but as time passes by, environmentalism diffuses to lower-SES groups. We test the diffusion argument using a sample of 18 countries for two waves (years 1993 and 2000) from the International Social Survey Project (ISSP). Cross-classified multilevel modeling allows us to identify a non-linear interaction between cohort and education, our core measure of SES, in predicting environmental concern, while controlling for age and period. We find support for the diffusion argument and demonstrate that the positive effect of education on environmental concern first increases among older cohorts, then starts to level off until a bend-point is reached for individuals born around 1940 and becomes progressively weaker for younger cohorts. PMID:24179313

Cohort change and the diffusion of environmental concern: A cross-national analysis.

PubMed

Nawrotzki, Raphael J; Pampel, Fred C

2013-09-01

This study explores value change across cohorts for a multinational population sample. Employing a diffusion-of-innovations approach, we combine competing theories predicting the relationship between socio-economic status (SES) and environmentalism: post-materialism and affluence theories, and global environmentalism theory. The diffusion argument suggests that high-SES groups first adopt pro-environmental views, but as time passes by, environmentalism diffuses to lower-SES groups. We test the diffusion argument using a sample of 18 countries for two waves (years 1993 and 2000) from the International Social Survey Project (ISSP). Cross-classified multilevel modeling allows us to identify a non-linear interaction between cohort and education, our core measure of SES, in predicting environmental concern, while controlling for age and period. We find support for the diffusion argument and demonstrate that the positive effect of education on environmental concern first increases among older cohorts, then starts to level off until a bend-point is reached for individuals born around 1940 and becomes progressively weaker for younger cohorts.

Printable organic and inorganic materials for flexible electrochemical devices

NASA Astrophysics Data System (ADS)

Wojcik, Pawel Jerzy

The growing demand of consumer printed electronics such as smart cards, smart packaging, automotive displays, electronic paper and others led to the increased interest in fully printed electrochemical devices. These components are expected to be developed based on printed thin films derived from cheap and widely accessible compounds. This dissertation presents the long stretch of technical research that was performed to realize printed energy efficient concepts such as electrochromic displays and smart-windows. Within this broad theme, the presented study had a number of specific objectives, however, the overall aim was to develop low-cost material systems (i.e. printable mixtures) at a lab-scale, which would be compatible with large-scale roll-to-roll processing. Presented results concern three main topics: (i) dual-phase inorganic electrochromic material processed at low temperature, (ii) enhancement in electrochromic performance via metaloxide nanoparticles engineering, and (iii) highly conductive and mechanically stable solid-state electrolyte. First two topics are related to crystallographic structure of metal-oxide films derived from sol-gel precursor, which is shown to be critical for electrochemical performance. The proposed method of microstructure control enables development of electrochromic films which outperform their amorphous or nanocrystalline analogues presented in the state-of-the-art due to their superior chemical and physical properties. Developed materials and processes resulted in electrochemical devices exhibiting optical density on the level of 0.82 and switching time shorter than 3 seconds, reaching performance at practical level. Third topic concerns a new concept of solid state electrolyte based on plastic crystal doped with lithium salt, dispersed in a thermosetting polymer resin network. This soft matter printable electrolyte meets requirements for electrochromic applications, exhibiting ionic conductivities of 10. -6 - 10. -4 S cm-1 at ambient temperature, Young'sModulus in the range of 0.1 - 1.4 MPa and operational temperature up to 115°C. In order to extract information from massive computational data, model developed material systems and optimize composition, an efficient mathematical methodology based on statistical techniques was applied. This approach significantly reduces the number of experiments to be realized, while maintaining a high accuracy of the analysis. Using this approach the number of experiments has been reduced from 162 down to 30 in case of dual-phase electrochromic films, and from 729 down to 28 in study on solid-state electrolyte (when comparing to classical three-level full factorial approach). Coupling of statistical methods with formulation of electrochemically active materials shows the potential to maximize the capabilities of these systems.

Technological challenges of addressing new and more complex migrating products from novel food packaging materials.

PubMed

Munro, Ian C; Haighton, Lois A; Lynch, Barry S; Tafazoli, Shahrzad

2009-12-01

The risk assessment of migration products resulting from packaging material has and continues to pose a difficult challenge. In most jurisdictions, there are regulatory requirements for the approval or notification of food contact substances that will be used in packaging. These processes generally require risk assessment to ensure safety concerns are addressed. The science of assessing food contact materials was instrumental in the development of the concept of Threshold of Regulation and the Threshold of Toxicological Concern procedures. While the risk assessment process is in place, the technology of food packaging continues to evolve to include new initiatives, such as the inclusion of antimicrobial substances or enzyme systems to prevent spoilage, use of plastic packaging intended to remain on foods as they are being cooked, to the introduction of more rigid, stable and reusable materials, and active packaging to extend the shelf-life of food. Each new technology brings with it the potential for exposure to new and possibly novel substances as a result of migration, interaction with other chemical packaging components, or, in the case of plastics now used in direct cooking of products, degradation products formed during heating. Furthermore, the presence of trace levels of certain chemicals from packaging that were once accepted as being of low risk based on traditional toxicology studies are being challenged on the basis of reports of adverse effects, particularly with respect to endocrine disruption, alleged to occur at very low doses. A recent example is the case of bisphenol A. The way forward to assess new packaging technologies and reports of very low dose effects in non-standard studies of food contact substances is likely to remain controversial. However, the risk assessment paradigm is sufficiently robust and flexible to be adapted to meet these challenges. The use of the Threshold of Regulation and the Threshold of Toxicological Concern concepts may play a critical role in the risk assessment of new food packaging technologies in the future.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Litchfield, J.W.; Watts, R.L.; Gurwell, W.E.

A materials assessment methodology for identifying specific critical material requirements that could hinder the implementation of solar energy has been developed and demonstrated. The methodology involves an initial screening process, followed by a more detailed materials assessment. The detailed assessment considers such materials concerns and constraints as: process and production constraints, reserve and resource limitations, lack of alternative supply sources, geopolitical problems, environmental and energy concerns, time constraints, and economic constraints. Data for 55 bulk and 53 raw materials are currently available on the data base. These materials are required in the example photovoltaic systems. One photovoltaic system and thirteenmore » photovoltaic cells, ten solar heating and cooling systems, and two agricultural and industrial process heat systems have been characterized to define their engineering and bulk material requirements.« less

INTERNATIONAL COOPERATION ON RADIOLOGICAL THREAT REDUCTION PROGRAMS IN RUSSIA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Landers, Christopher C.; Tatyrek, Aaron P.

Since its inception in 2004, the United States Department of Energy’s Global Threat Reduction Initiative (GTRI) has provided the Russian Federation with significant financial and technical assistance to secure its highly vulnerable and dangerous radiological material. The three program areas of this assistance are the removal of radioisotope thermoelectric generators (RTG), the physical protection of vulnerable in-use radiological material of concern, and the recovery of disused or abandoned radiological material of concern. Despite the many successes of the GTRI program in Russia, however, there is still a need for increased international cooperation in these efforts. Furthermore, concerns exist over howmore » the Russian government will ensure that the security of its radiological materials provided through GTRI will be sustained. This paper addresses these issues and highlights the successes of GTRI efforts and ongoing activities.« less

Ultrasonic stress wave characterization of composite materials

NASA Technical Reports Server (NTRS)

Duke, J. C., Jr.; Henneke, E. G., II; Stinchcomb, W. W.

1986-01-01

The work reported covers three simultaneous projects. The first project was concerned with: (1) establishing the sensitivity of the acousto-ultrasonic method for evaluating subtle forms of damage development in cyclically loaded composite materials, (2) establishing the ability of the acousto-ultrasonic method for detecting initial material imperfections that lead to localized damage growth and final specimen failure, and (3) characteristics of the NBS/Proctor sensor/receiver for acousto-ultrasonic evaluation of laminated composite materials. The second project was concerned with examining the nature of the wave propagation that occurs during acoustic-ultrasonic evaluation of composite laminates and demonstrating the role of Lamb or plate wave modes and their utilization for characterizing composite laminates. The third project was concerned with the replacement of contact-type receiving piezotransducers with noncontacting laser-optical sensors for acousto-ultrasonic signal acquisition.

Intelligence Fusion Paradigm: Understanding Complex Operational Environments Implementing the Institutional Analysis and Development Framework

DTIC Science & Technology

2012-12-14

NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Whitfield, Christy L., MAJOR, U.S. Army 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT...the level of details necessary to consumer’s needs. It must also contain accurate assessments 4 of all applicable material and apply to the end ...half of the 20th century , focused on cultural perspectives as a pivotal concern regarding economic, political, and military powers and its global

Low-Level Radiation: Are Chemical Officers Adequately Trained

DTIC Science & Technology

2004-06-17

dose of five cGy per year. In this example the 150 cGy is not an authorized limit, and the Army is not saying that there will not be any health effects ...the units. Many soldiers and local civilians were concerned about the possible health effects of the radiation. They were afraid of the radiation and...threat and ways to mitigate that threat. The health effects posed by radioactive material or what the military would have to do to respond to an attack

Presence and leaching of bisphenol a (BPA) from dental materials

PubMed Central

Becher, Rune; Wellendorf, Hanne; Sakhi, Amrit Kaur; Samuelsen, Jan Tore; Thomsen, Cathrine; Bølling, Anette Kocbach; Kopperud, Hilde Molvig

2018-01-01

Abstract BPA has been reported to leach from some resin based dental restorative materials and materials used for orthodontic treatment. To confirm and update previous findings, especially in light of the new temporary lower threshold value for tolerable daily BPA intake, we have investigated the leaching of BPA from 4 composite filling materials, 3 sealants and 2 orthodontic bonding materials. The materials were either uncured and dissolved in methanol or cured. The cured materials were kept in deionized water for 24 hours or 2 weeks. Samples were subsequently analyzed by ultra-performance liquid chromatography coupled to mass spectrometry (UPLC-MS-MS). The composite filling material Tetric EvoFlow® and the fissure sealant DELTON® showed significantly higher levels of BPA leaching compared to control samples for all test conditions (uncured, 24 h leaching and 2 weeks leaching). There were no significant differences in amount of leached BPA for any of the tested materials after 24 hours compared to 2 weeks. These results show that BPA is still released from some dental materials despite the general concern about potential adverse effects of BPA. However, the amounts of BPA were relatively low and most likely represent a very small contribution to the total BPA exposure. PMID:29868625

NASA Thermographic Inspection of Advanced Composite Materials

NASA Technical Reports Server (NTRS)

Cramer, K. Elliott

2004-01-01

As the use of advanced composite materials continues to increase in the aerospace community, the need for a quantitative, rapid, in situ inspection technology has become a critical concern throughout the industry. In many applications it is necessary to monitor changes in these materials over an extended period of time to determine the effects of various load conditions. Additionally, the detection and characterization of defects such as delaminations, is of great concern. This paper will present the application of infrared thermography to characterize various composite materials and show the advantages of different heat source types. Finally, various analysis methodologies used for quantitative material property characterization will be discussed.

Teaching General Chemistry: A Materials Science Companion.

ERIC Educational Resources Information Center

Ellis, Arthur B.; And Others

Many teachers and other educators have expressed a concern regarding the lack of student interest in many of the traditional science courses. To help rectify this problem a collaborative effort among educators and others concerned has led to the development of instructional materials that are more relevant to the lives of students. This document…

Polyfluorinated substances in abiotic standard reference ...

EPA Pesticide Factsheets

The National Institute of Standards and Technology (NIST) has a wide range of Standard Reference Materials (SRMs) which have values assigned for legacy organic pollutants and toxic elements. Existing SRMs serve as homogenous materials that can be used for method development, method validation, and measurement for contaminants that are now of concern. NIST and multiple groups have been measuring the mass fraction of a group of emerging contaminants, polyfluorinated substances (PFASs), in a variety of SRMs. Here we report levels determined in an interlaboratory comparison of up to 23 PFASs determined in five SRMs: sediment (SRMs 1941b and 1944), house dust (SRM 2585), soil (SRM 2586), and sludge (SRM 2781). Measurements presented show an array of PFASs, with perfluorooctane sulfonate being the most frequently detected. SRMs 1941b, 1944, and 2586 had relatively low concentrations of most PFASs measured while 23 PFASs were at detectable levels in SRM 2585 and most of the PFASs measured were at detectable levels in SRM 2781. The measurements made in this study were used to add values to the Certificates of Analysis for SRMs 2585 and 2781. Journal article published in Analytical and Bioanalytical Chemistry

Teaching Design in Middle-School: Instructors' Concerns and Scaffolding Strategies

NASA Astrophysics Data System (ADS)

Bamberger, Yael M.; Cahill, Clara S.

2013-04-01

This study deals with engineering education in the middle-school level. Its focus is instructors' concerns in teaching design, as well as scaffolding strategies that can help teachers deal with these concerns. Through participatory action research, nine instructors engaged in a process of development and instruction of a curriculum about energy along with engineering design. A 50-h curriculum was piloted during a summer camp for 38 middle-school students. Data was collected through instructors' materials: observation field notes, daily reflections and post-camp discussions. In addition, students' artifacts and planning graphical models were collected in order to explore how instructors' concerns were aligned with students' learning. Findings indicate three main tensions that reflect instructors' main concerns: how to provide sufficient scaffolding yet encourage creativity, how to scaffold hands-on experiences that promote mindful planning, and how to scaffold students' modeling practices. Pedagogical strategies for teaching design that developed through this work are described, as well as the ways they address the National Research Council (A framework for K-12 science education: practices, crosscutting concepts, and core ideas. National Academies Press, Washington, DC, 2011) core ideas of engineering education and the International Technological Literacy standards (ITEA in Standards for technological literacy, 3rd edn. International Technology education Association, Reston, VA, 2007).

A Hybrid Approach to Composite Damage and Failure Analysis Combining Synergistic Damage Mechanics and Peridynamics

DTIC Science & Technology

2016-03-31

fiber distributions. Task 2.1 is concerned with damage evolution in a peridynamic model of poroelastic materials. Initial results for both tasks are...distributions. Task 2.1 is concerned with damage evolution in a peridynamic model of poroelastic materials. Initial results for both tasks are reported and...Task 2.1: Damage evolution in a peridynamic model of poroelastic materials. Background and Motivation In order to model the presence of pores and

Potential approaches to the spectroscopic characterization of high performance polymers exposed to energetic protons and heavy ions

NASA Technical Reports Server (NTRS)

Suleman, Naushadalli K.

1991-01-01

A potential limitation to human activity on the lunar surface or in deep space is the exposure of the crew to unacceptably high levels of penetrating space radiations. The radiations of most concerns for such missions are high-energy protons emitted during solar flares, and galactic cosmic rays which are high-energy ions ranging from protons to iron. The development of materials for effective shielding from energetic space radiations will clearly require a greater understanding of the underlying mechanisms of radiation-induced damage in bulk materials. This can be accomplished in part by the detailed spectroscopic characterization of bulk materials that were exposed to simulated space radiations. An experimental data base thus created can then be used in conjunction with existing radiation transport codes in the design and fabrication of effective radiation shielding materials. Electron Paramagnetic Resonance Spectroscopy was proven very useful in elucidating radiation effects in polymers (high performance polymers are often an important components of structural composites).

Space environmental effects on polymeric materials

NASA Technical Reports Server (NTRS)

Kiefer, Richard L.; Orwoll, Robert A.

1988-01-01

Two of the major environmental hazards in the Geosynchronous Earth Orbit (GEO) are energetic charged particles and ultraviolet radiation. The charged particles, electrons and protons, range in energy from 0.1 to 4 MeV and each have a flux of 10 to the 8th sq cm/sec. Over a 30 year lifetime, materials in the GEO will have an absorbed dose from this radiation of 10 to the 10th rads. The ultraviolet radiation comes uninhibited from the sun with an irradiance of 1.4 kw/sq m. Radiation is known to initiate chain sission and crosslinking in polymeric materials, both of which affect their structural properties. The 30-year dose level from the combined radiation in the GEO exceeds the threshold for measurable damage in most polymer systems studied. Of further concern is possible synergistic effects from the simultaneous irradiation with charged particles and ultraviolet radiation. Most studies on radiation effects on polymeric materials use either electrons or ultraviolet radiation alone, or in a sequential combination.

Spectroscopic and crystal-field analysis of new Yb-doped laser materials

NASA Astrophysics Data System (ADS)

Haumesser, Paul-Henri; Gaumé, Romain; Viana, Bruno; Antic-Fidancev, Elisabeth; Vivien, Daniel

2001-06-01

Crystal-field effects are very important as far as laser performances of Yb-doped materials are concerned. In order to simplify the interpretation of low-temperature spectra, two tools derived from a careful examination of crystal-field interaction are presented. Both approaches are successfully applied in the case of new Yb-doped materials, namely Ca3Y2(BO3)4 (CYB), Ca3Gd2(BO3)4 (CaGB), Sr3Y(BO3)3 (SrYBO), Ba3Lu(BO3)3 (BLuB), Y2SiO5 (YSO), Ca2Al2SiO7 (CAS) and SrY4(SiO4)3O (SYS). The 2F7/2 splitting is particularly large in these materials and favourable to a quasi-three-level laser operating scheme. Calculations performed using the point charge electrostatic model for these compounds and using a consistent set of effective atomic charges confirm the experimental results. This should permit to use this model in a predictive approach.

To have or to be? A comparison of materialism-based theories and self-determination theory as explanatory frameworks of prejudice.

PubMed

Van Hiel, Alain; Cornelis, Ilse; Roets, Arne

2010-06-01

The present study aimed to delineate the psychological structure of materialism and intrinsic and extrinsic value pursuit. Moreover, we compared models based on self-determination theory (SDT), Fromm's marketing character, and Inglehart's theory of social change to account for racial prejudice. In a sample of undergraduate students (n=131) and adults (n=176) it was revealed that the extrinsic value pursuit Financial Success/Materialism could be distinguished from the extrinsic value scales Physical Appeal and Social Recognition, and Community Concern could be distinguished from the intrinsic value pursuit scales Self-acceptance and Affiliation. Moreover, Financial Success/Materialism and Community Concern were consistently and significantly related to prejudice, whereas the other SDT facet scales yielded weaker relationships with prejudice. Structural models based on SDT and Inglehart were not corroborated, but instead the present data supported a mediation model based on Fromm's work in which the effect of Community Concern was mediated by Financial Success/Materialism. Broader implications for SDT are critically assessed.

Effect of subliminal visual material on an auditory signal detection task.

PubMed

Moroney, E; Bross, M

1984-02-01

An experiment assessed the effect of subliminally embedded, visual material on an auditory detection task. 22 women and 19 men were presented tachistoscopically with words designated as "emotional" or "neutral" on the basis of prior GSRs and a Word Rating List under four conditions: (a) Unembedded Neutral, (b) Embedded Neutral, (c) Unembedded Emotional, and (d) Embedded Emotional. On each trial subjects made forced choices concerning the presence or absence of an auditory tone (1000 Hz) at threshold level; hits and false alarm rates were used to compute non-parametric indices for sensitivity (A') and response bias (B"). While over-all analyses of variance yielded no significant differences, further examination of the data suggests the presence of subliminally "receptive" and "non-receptive" subpopulations.

Guidelines for the Design, Fabrication, Testing, Installation and Operation of Srf Cavities

NASA Astrophysics Data System (ADS)

Theilacker, J.; Carter, H.; Foley, M.; Hurh, P.; Klebaner, A.; Krempetz, K.; Nicol, T.; Olis, D.; Page, T.; Peterson, T.; Pfund, P.; Pushka, D.; Schmitt, R.; Wands, R.

2010-04-01

Superconducting Radio-Frequency (SRF) cavities containing cryogens under pressure pose a potential rupture hazard to equipment and personnel. Generally, pressure vessels fall within the scope of the ASME Boiler and Pressure Vessel Code however, the use of niobium as a material for the SRF cavities is beyond the applicability of the Code. Fermilab developed a guideline to ensure sound engineering practices governing the design, fabrication, testing, installation and operation of SRF cavities. The objective of the guideline is to reduce hazards and to achieve an equivalent level of safety afforded by the ASME Code. The guideline addresses concerns specific to SRF cavities in the areas of materials, design and analysis, welding and brazing, pressure relieving requirements, pressure testing and quality control.

Mechanisms and modelling of waste-cement and cement-host rock interactions

NASA Astrophysics Data System (ADS)

2017-06-01

Safe and sustainable disposal of hazardous and radioactive waste is a major concern in today's industrial societies. The hazardous waste forms originate from residues of thermal treatment of waste, fossil fuel combustion and ferrous/non-ferrous metal smelting being the most important ones in terms of waste production. Low- and intermediate-level radioactive waste is produced in the course of nuclear applications in research and energy production. For both waste forms encapsulation in alkaline, cement-based matrices is considered to ensure long-term safe disposal. Cementitious materials are in routine use as industrial materials and have mainly been studied with respect to their evolution over a typical service life of several decades. Use of these materials in waste management applications, however, requires assessments of their performance over much longer time periods on the order of thousands to several ten thousands of years.

Exposure to harsh parenting and pornography as explanations for males' sexual coercion and females' sexual victimization.

PubMed

Simons, Leslie Gordon; Simons, Ronald L; Lei, Man-Kit; Sutton, Tara E

2012-01-01

Sexual violence against women is a major concern to researchers and policy makers, as well as to the general public. This study uses a sample of more than 2,000 college students to investigate the extent to which exposure to harsh parenting practices and sexually explicit materials contributes to perpetration and victimization. Findings indicate that frequent corporal punishment in the family of origin combined with consumption of pornographic materials increased the probability that males reported engaging in coercive sexual practices. For females, both frequent corporal punishment and exposure to paternal hostility combined with consumption of pornographic materials were associated with higher levels of reported sexual victimization. These results provide increased understanding of the impact of pornography use among a nonclinical sample, as well as the consequences of experiencing harsh corporal punishment in one's family of origin, on the sexual victimization of females.

49 CFR 1580.105 - Reporting significant security concerns.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Reporting significant security concerns. 1580.105... Hazardous Materials Receivers, and Private Cars § 1580.105 Reporting significant security concerns. (a... threats and significant security concerns to DHS by telephoning the Freedom Center at 1-866-615-5150. (c...

SPECIAL ANALYSIS AIR PATHWAY MODELING OF E-AREA LOW-LEVEL WASTE FACILITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hiergesell, R.; Taylor, G.

This Special Analysis (SA) was initiated to address a concern expressed by the Department of Energy's Low Level Waste Disposal Facility Federal Review Group (LFRG) Review Team during their review of the 2008 E-Area Performance Assessment (PA) (WSRC, 2008). Their concern was the potential for overlapping of atmospheric plumes, emanating from the soil surface above SRS LLW disposal facilities within the E-Area, to contribute to the dose received by a member of the public during the Institutional Control (IC) period. The implication of this concern was that the dose to the maximally-exposed individual (MEI) located at the SRS boundary mightmore » be underestimated during this time interval. To address this concern a re-analysis of the atmospheric pathway releases from E-Area was required. In the process of developing a new atmospheric release model (ARM) capable of addressing the LFRG plume overlap concern, it became obvious that new and better atmospheric pathway disposal limits should be developed for each of the E-Area disposal facilities using the new ARM. The scope of the SA was therefore expanded to include the generation of these new limits. The initial work conducted in this SA was to develop a new ARM using the GoldSim{reg_sign} program (GTG, 2009). The model simulates the subsurface vapor diffusion of volatile radionuclides as they release from E-Area disposal facility waste zones and migrate to the land surface. In the process of this work, many new features, including several new physical and chemical transport mechanisms, were incorporated into the model. One of the most important improvements was to incorporate a mechanism to partition volatile contaminants across the water-air interface within the partially saturated pore space of the engineered and natural materials through which vapor phase transport occurs. A second mechanism that was equally important was to incorporate a maximum concentration of 1.9E-07 Ci/m{sup 3} of {sup 14}CO{sub 2} in the air-filled pores of cementitious materials. The ARM also combines the individual transport models constructed for each E-Area disposal facility into a single model, and was ultimately used to analyze the LFRG concern regarding the potential for atmospheric plume overlap at the SRS boundary during the IC period. To evaluate the plume overlap issue, a conservative approach was adopted whereby the MEI at the SRS boundary was exposed to the releases from all E-Area disposal facilities simultaneously. This is equivalent to a 100% overlap of all atmospheric plumes emanating from E-Area. Should the dose received from this level of atmospheric plume overlap still fall below the permissible exposure level of 10 mrem/yr, then the LFRG concern would be alleviated. The structuring of the ARM enables this evaluation to be easily performed. During the IC period, the peak of the 'total plume overlap dose' was computed to be 1.9E-05 mrem/yr, which is five orders of magnitude lower than the 10 mrem/yr PA performance objective for the atmospheric release pathway. The main conclusion of this study is that for atmospheric releases from the E-Area disposal facilities, plume overlap does not cause the total dose to the MEI at the SRS boundary during the IC to exceed the Performance Assessment (PA) performance objective. Additionally, the potential for plume overlap was assessed in the post-Institutional Control period. Atmospheric plume overlap is less likely to occur during this period but conceivably could occur if the prevailing wind direction shifted so as to pass directly over all EArea disposal facilities and transport airborne radionuclides to the MEI at the 100 m point of compliance (POC). This concern was also demonstrated of little concern, as the maximum plume overlap dose was found to be 1.45E+00 mrem/yr (or {approx}15% of the performance measure) during this period and under these unlikely conditions.« less

Kansas State Briefing Book on low-level radioactive waste management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-07-01

The Kansas State Briefing Book is one of a series of state briefing books on low-level radioactive waste management practices. It has been prepared to assist state and federal agency officials in planning for safe low-level radioactive waste disposal. The report contains a profile of low-level radioactive waste generators in Kansas. The profile is the result of a survey of radioactive material licensees in Kansas. The briefing book also contains a comprehensive assessment of low-level radioactive waste management issues and concerns as defined by all major interested parties including industry, government, the media, and interest groups. The assessment was developedmore » through personal communications with representatives of interested parties, and through a review of media sources. Lastly, the briefing book provides demographic and socioeconomic data and a discussion of relevant government agencies and activities, all of which may affect waste management practices in Kansas.« less

Maine State Briefing Book on low-level radioactive waste management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-08-01

The Maine State Briefing Book is one of a series of state briefing books on low-level radioactive waste management practices. It has been prepared to assist state and Federal agency officials in planning for safe low-level radioactive waste disposal. The report contains a profile of low-level radioactive waste generators in Maine. The profile is the result of a survey of radioactive material licensees in Maine. The briefing book also contains a comprehensive assessment of low-level radioactive waste management issues and concerns as defined by all major interested partices including industry, government, the media, and interest groups. The assessment was developedmore » through personal communications with representatives of interested parties, and through a review of media sources. Lastly, the briefing book provides demographic and socioeconomic data and a discussion of relevant goverment agencies and activities, all of which may impact management practices in Maine.« less

Deliberating Immigration Policy: Locating Instructional Materials within Global and Multicultural Perspectives

ERIC Educational Resources Information Center

Camicia, Steven P.

2007-01-01

Numerous theorists have identified a need for students to learn to solve global concerns in an increasingly interconnected world. The issue of immigration policy is one such concern. This study analyzed the texts of two programs teaching deliberation and U.S. immigration policy. The purpose of the study was to analyze instructional materials that…

Youth Sports Participation and Attitudes toward Societal Competition, Concern for Material Items, and the Consequences of Manipulative Advertising

ERIC Educational Resources Information Center

Denham, Bryan E.

2009-01-01

Grounded in social cognitive theory, this study examines how a combination of personal, behavioral and environmental factors among youth populations correspond with attitudes toward competition, concern for material items, and the effects of advertising practices in the United States. Of particular interest was whether school-sponsored sports…

The Global Threat Reduction Initiative's Orphan Source Recovery Project in the Russian Federation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Russell, J. W.; Ahumada, A. D.; Blanchard, T. A.

After 9/11, officials at the United States Department of Energy (DOE), National Nuclear Security Administration (NNSA) grew more concerned about radiological materials that were vulnerable to theft and illicit use around the world. The concern was that terrorists could combine stolen radiological materials with explosives to build and detonate a radiological dispersal device (RDD), more commonly known as a “dirty bomb.” In response to this and other terrorist threats, the DOE/NNSA formed what is now known as the Global Threat Reduction Initiative (GTRI) to consolidate and accelerate efforts to reduce and protect vulnerable nuclear and radiological materials located at civilianmore » sites worldwide. Although a cooperative program was already underway in the Russian Federation to secure nuclear materials at a range of different facilities, thousands of sealed radioactive sources remained vulnerable at medical, research, and industrial sites. In response, GTRI began to focus efforts on addressing these materials. GTRI’s Russia Orphan Source Recovery Project, managed at the Nevada National Security Site’s North Las Vegas facility, was initiated in 2002. Throughout the life of the project, Joint Stock Company “Isotope” has served as the primary Russian subcontractor, and the organization has proven to be a successful partner. Since the first orphan source recovery of an industrial cobalt-60 irradiator with 647 curies (Ci) at an abandoned facility in Moscow in 2003, the GTRI Orphan Source Recovery Project in the Russian Federation has accomplished substantial levels of threat reduction. To date, GTRI has recovered and securely disposed of more than 5,100 sources totaling more that 628,000 Ci. This project serves as an extraordinary example of how international cooperation can be implemented by partners with mutual interests to achieve significant goals.« less

Non-viral gene delivery regulated by stiffness of cell adhesion substrates.

PubMed

Kong, Hyun Joon; Liu, Jodi; Riddle, Kathryn; Matsumoto, Takuya; Leach, Kent; Mooney, David J

2005-06-01

Non-viral gene vectors are commonly used for gene therapy owing to safety concerns with viral vectors. However, non-viral vectors are plagued by low levels of gene transfection and cellular expression. Current efforts to improve the efficiency of non-viral gene delivery are focused on manipulations of the delivery vector, whereas the influence of the cellular environment in DNA uptake is often ignored. The mechanical properties (for example, rigidity) of the substrate to which a cell adheres have been found to mediate many aspects of cell function including proliferation, migration and differentiation, and this suggests that the mechanics of the adhesion substrate may regulate a cell's ability to uptake exogeneous signalling molecules. In this report, we present a critical role for the rigidity of the cell adhesion substrate on the level of gene transfer and expression. The mechanism relates to material control over cell proliferation, and was investigated using a fluorescent resonance energy transfer (FRET) technique. This study provides a new material-based control point for non-viral gene therapy.

The role of global economic policy uncertainty in long-run volatilities and correlations of U.S. industry-level stock returns and crude oil.

PubMed

Yu, Honghai; Fang, Libing; Sun, Boyang

2018-01-01

We investigate how Global Economic Policy Uncertainty (GEPU) drives the long-run components of volatilities and correlations in crude oil and U.S. industry-level stock markets. Using the modified generalized autoregressive conditional heteroskedasticity mixed data sampling (GARCH-MIDAS) and dynamic conditional correlation mixed data sampling (DCC-MIDAS) specifications, we find that GEPU is positively related to the long-run volatility of Financials and Consumer Discretionary industries; however, it is negatively related to Information Technology, Materials, Telecommunication Services and Energy. Unlike the mixed role of GEPU in the long-run volatilities, the long-run correlations are all positively related to GEPU across the industries. Additionally, the rankings of the correlations of Energy and Materials are time-invariant and classified as high, with the little exception of the latter. The Consumer Staples industry is time-invariant in the low-ranking group. Our results are helpful to policy makers and investors with long-term concerns.

The role of global economic policy uncertainty in long-run volatilities and correlations of U.S. industry-level stock returns and crude oil

PubMed Central

Yu, Honghai; Sun, Boyang

2018-01-01

We investigate how Global Economic Policy Uncertainty (GEPU) drives the long-run components of volatilities and correlations in crude oil and U.S. industry-level stock markets. Using the modified generalized autoregressive conditional heteroskedasticity mixed data sampling (GARCH-MIDAS) and dynamic conditional correlation mixed data sampling (DCC-MIDAS) specifications, we find that GEPU is positively related to the long-run volatility of Financials and Consumer Discretionary industries; however, it is negatively related to Information Technology, Materials, Telecommunication Services and Energy. Unlike the mixed role of GEPU in the long-run volatilities, the long-run correlations are all positively related to GEPU across the industries. Additionally, the rankings of the correlations of Energy and Materials are time-invariant and classified as high, with the little exception of the latter. The Consumer Staples industry is time-invariant in the low-ranking group. Our results are helpful to policy makers and investors with long-term concerns. PMID:29420645

EU Development of High Heat Flux Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linke, J.; Lorenzetto, P.; Majerus, P.

2005-04-15

The development of plasma facing components for next step fusion devices in Europe is strongly focused to ITER. Here a wide spectrum of different design options for the divertor target and the first wall have been investigated with tungsten, CFC, and beryllium armor. Electron beam simulation experiments have been used to determine the performance of high heat flux components under ITER specific thermal loads. Beside thermal fatigue loads with power density levels up to 20 MWm{sup -2}, off-normal events are a serious concern for the lifetime of plasma facing components. These phenomena are expected to occur on a time scalemore » of a few milliseconds (plasma disruptions) or several hundred milliseconds (vertical displacement events) and have been identified as a major source for the production of neutron activated metallic or tritium enriched carbon dust which is of serious importance from a safety point of view.The irradiation induced material degradation is another critical concern for future D-T-burning fusion devices. In ITER the integrated neutron fluence to the first wall and the divertor armour will remain in the order of 1 dpa and 0.7 dpa, respectively. This value is low compared to future commercial fusion reactors; nevertheless, a nonnegligible degradation of the materials has been detected, both for mechanical and thermal properties, in particular for the thermal conductivity of carbon based materials. Beside the degradation of individual material properties, the high heat flux performance of actively cooled plasma facing components has been investigated under ITER specific thermal and neutron loads.« less

Innovative methods of knowledge transfer by multimedia library

NASA Astrophysics Data System (ADS)

Goanta, A. M.

2016-08-01

The present situation of teaching and learning new knowledge taught in the classroom is highly variable depending on the specific topics concerned. If we analyze the manifold ways of teaching / learning at university level, we can notice a very good combination between classical and modern methods. The first category includes the classic chalk blackboard teaching, followed by the also classical learning based on paper reference material. The second category includes books published in PDF or PPT [1], which are printed on the type backing CD / DVD. Since 2006 the author was concerned about the transfer of information and knowledge through video files like AVI, FLV or MPEG using various means of transfer, from the free ones (via Internet) and continuing with those involving minimal costs, i.e. on CD / DVD support. Encouraged by the students’ interest in this kind of teaching material as proved by monitoring [2] the site http://www.cursuriuniversitarebraila.ugal.ro, the author has managed to publish with ISBN the first video book in Romania, which has a non conformist content in that the chapters are located not by paging but by the hour or minutes of shooting when they were made.

Barriers to antiretroviral therapy adherence in developed countries: a qualitative synthesis to develop a conceptual framework for a new patient-reported outcome measure.

PubMed

Engler, Kim; Lènàrt, Andras; Lessard, David; Toupin, Isabelle; Lebouché, Bertrand

2018-05-02

Suboptimal adherence to antiretroviral therapy (ART) remains common. Patient-centered tools are needed to comprehensively assess adherence barriers in HIV clinical practice. Thus, we conducted a research synthesis to produce a conceptual framework for a new patient-reported outcome measure (PRO) for use in routine HIV care in Canada and France. A PRO's conceptual framework graphically represents the concepts to be measured and the potential relationships between them. Towards ensuring the framework's relevance to the target populations' concerns, qualitative studies with HIV-positive adults on barriers to ART adherence in developed countries were synthesized with thematic analysis, attending to the cross-study prevalence and interrelationships of barrier themes. In March 2016, searches within Medline, PsychINFO, and Embase produced 5,284 records. Two reviewers determined the final sample (n = 41). Analysis generated three levels of ART adherence barrier themes. Twenty Level 2 themes and their component subthemes (Level 3) were organized into 6 higher-order themes (Level 1): Cognitive and emotional aspects (100% of studies contributing content -prevalence), Lifestyle factors (95%), Social and material context (95%), Characteristics of ART (90%), Health experience and state (73%), and Healthcare services and system (66%). As to interrelationships, study authors articulated relationships between all higher-order themes (Level 3). Linkages between Level 2 barrier themes showed great variability, from 21% to 95%. Overall, this synthesis contributes an exceptionally detailed conceptual framework and report of ART adherence barriers, applicable to a wide range of PLHIV. It suggests that a key to understanding many barriers is through their interconnections. It also identifies gaps in barrier research. Concerning the new PRO's development, comprehensiveness will need to be weighed against other concerns (e.g., respondent burden) and the provision of barrier-specific guidance for clinically addressing its scores seems essential.

Background Materials Concerning Child and Family Services Act, 1975, H.R. 2966. Committee Print, 94th Congress, 2d Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

This document contains the text of Child and Family Services Act of 1975, H.R. 2966, and background materials concerning that act. Included are reprints of many newspaper and magazine articles as well as statements of members of Congress in response to the campaign against the bill. (MS)

Participation in a Household Hazardous Waste Collection Drive and "Before" and "After" Public Knowledge and Disposal Practices: Champaign County.

ERIC Educational Resources Information Center

Liebert, Roland J.

The extent to which households use, store, and dispose of hazardous materials has become a matter of increasing concern but has been rarely assessed. This report provides an assessment of the first household hazardous materials publicity campaign and collection event held in Illinois. The report describes survey results concerning the state of…

Advanced Nanostructured Anode Materials for Sodium-Ion Batteries.

PubMed

Wang, Qidi; Zhao, Chenglong; Lu, Yaxiang; Li, Yunming; Zheng, Yuheng; Qi, Yuruo; Rong, Xiaohui; Jiang, Liwei; Qi, Xinguo; Shao, Yuanjun; Pan, Du; Li, Baohua; Hu, Yong-Sheng; Chen, Liquan

2017-11-01

Sodium-ion batteries (NIBs), due to the advantages of low cost and relatively high safety, have attracted widespread attention all over the world, making them a promising candidate for large-scale energy storage systems. However, the inherent lower energy density to lithium-ion batteries is the issue that should be further investigated and optimized. Toward the grid-level energy storage applications, designing and discovering appropriate anode materials for NIBs are of great concern. Although many efforts on the improvements and innovations are achieved, several challenges still limit the current requirements of the large-scale application, including low energy/power densities, moderate cycle performance, and the low initial Coulombic efficiency. Advanced nanostructured strategies for anode materials can significantly improve ion or electron transport kinetic performance enhancing the electrochemical properties of battery systems. Herein, this Review intends to provide a comprehensive summary on the progress of nanostructured anode materials for NIBs, where representative examples and corresponding storage mechanisms are discussed. Meanwhile, the potential directions to obtain high-performance anode materials of NIBs are also proposed, which provide references for the further development of advanced anode materials for NIBs. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Commodification and privacy: a Lockean perspective.

PubMed

Volkman, Richard

2010-09-01

This paper defends the thesis that privacy as a right is derived from fundamental rights to life, liberty, and property and does not permit restricting the commodification of bodily material; however, privacy as life, liberty, property does require conventions that ensure a robust and just market in bodily material. The analysis proceeds by defending a general commitment to liberty and markets, but not in the manner one might expect from a 'doctrinaire' libertarian. Ethical concerns about commodification are legitimate in the context of new medical and information technologies, but these concerns are not sufficiently well defined to justify political conclusions, since not every ethical concern is in itself a political concern, and the best way to resolve certain ethical difficulties is to draw up political boundaries that facilitate the discovery and testing of various solutions to our ethical puzzles. To illustrate the point, I will indicate how privacy as life, liberty, property defines such a dynamic solution to the problems of commodification of human bodily material and slippery information in insurance markets.

Sleep concerns in children and young people with cerebral palsy in their home setting.

PubMed

McCabe, Susan M; Blackmore, A Marie; Abbiss, Chris R; Langdon, Katherine; Elliott, Catherine

2015-12-01

The aims were to identify in-home concerns about sleep in children and young people with cerebral palsy (CP) across age and Gross Motor Function Classification Scale (GMFCS) levels. This was a retrospective review of clinical notes of 154 children and young people with CP, aged 1-18 years (M = 7.8; standard deviation = 5.4) who received a home-based sleep service. Reported concerns were synthesised, for analysis according to age groups (1-5, 6-13, 14-18) and GMFCS levels. Sixteen factors of concern were derived from the home-based assessment reports. Most children and young people had multiple factors of concern. These varied across age groups and GMFCS levels. Body position was of concern across all age groups, for over 90% at GMFCS levels IV and V, and for 10% at GMFCS level I. Settling routines were of concern for more than 90% at GMFCS levels I and II, but for less than 50% at GMFCS levels IV and V. Settling routines were of concern to over 65% of those under 6 years but less than 25% of those over 14 years. Conversely, pain and pressure care concerned less than 10% of children under 6, and more than 35% of those over 14 years. Concerns about sleep vary across ages and GMFCS levels of children and young people with CP. Concerns relate to impairment of body structure and function, activity, environment, and personal supports. Multi-disciplinary, home-based assessment and interventions are recommended to address these concerns. © 2015 The Authors. Journal of Paediatrics and Child Health © 2015 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Dust from mineral extraction: regulation of emissions in England

NASA Astrophysics Data System (ADS)

Marker, Brian

2013-04-01

The United Kingdom, which includes England, has fairly high levels of rainfall but sporadic droughts occur especially in the east. Mineral working gives rise to dust. Concerns about dust soiling are major source of public objections to new minerals extraction operations. Dust emissions from mineral workings are a significant cause of public concern in the United Kingdom and are recognised as sources of health concerns and nuisance. Emissions are controlled through a number of complementary sets of regulations that are generally well observed by the industry and well enforced by the relevant public authorities. comprehensive system of regulation, based on European and national law, to deal with all aspects of these operations including pollution control, planning, occupational health and safety and statutory nuisances. Most minerals applications are subject to EIA which forms that basis for planning and environmental conditions and monitoring of operations. There are limit values on PM10 and PM2.5 in air, and for potentially harmful elements (PHEs) in soils and water, derived from European regulations but, as yet, no limit values for PHEs (other than radioactive materials) in air. Stakeholder engagement is encouraged so that members of the public can express concerns during minerals operations and operators can quickly deal with these. While some effects inevitably remain, the levels of dust emissions are kept low through good site design and management, proper use of machinery which is equipped to minimise emissions, and good training of the workforce. Operational sites are required to have dust monitoring equipment located outside the site boundary so that any emerging problems can be detected and addressed quickly.

The Cost of Automotive Polymer Composites: A Review and Assessment of DOE's Lightweight Materials Composites Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, S.

2001-01-26

Polymer composite materials have been a part of the automotive industry for several decades, with early application in the 1953 Corvette. These materials have been used for applications with low production volumes, because of their shortened lead times and lower investment costs relative to conventional steel fabrication. Important drivers of the growth of polymer composites have been the reduced weight and parts consolidation opportunities the material offers, as well as design flexibility, corrosion resistance, material anisotropy, and mechanical properties. Although these benefits are well recognized by the industry, polymer composite use has been dampened by high material costs, slow productionmore » rates, and to a lesser extent, concerns about recyclability. Also impeding large scale automotive applications is a curious mixture of concerns about material issues such as crash energy absorption, recycling challenges, competitive and cost pressures, the industry's general lack of experience and comfort with the material, and industry concerns about its own capabilities (Flynn and Belzowski 1995). Polymer composite materials are generally made of two or more material components--fibers, either glass or carbon, reinforced in the matrix of thermoset or thermoplastic polymer materials. The glass-reinforced thermoset composites are the most commonly used composite in automotive applications today, but thermoplastic composites and carbon fiber-reinforced thermosets also hold potential. It has been estimated that significant use of glass-reinforced polymers as structural components could yield a 20-35% reduction in vehicle weight. More importantly, the use of carbon fiber-reinforced materials could yield a 40-65% reduction in weight.« less

Evaluation of a Variable-Impedance Ceramic Matrix Composite Acoustic Liner

NASA Technical Reports Server (NTRS)

Jones, M. G.; Watson, W. R.; Nark, D. M.; Howerton, B. M.

2014-01-01

As a result of significant progress in the reduction of fan and jet noise, there is growing concern regarding core noise. One method for achieving core noise reduction is via the use of acoustic liners. However, these liners must be constructed with materials suitable for high temperature environments and should be designed for optimum absorption of the broadband core noise spectrum. This paper presents results of tests conducted in the NASA Langley Liner Technology Facility to evaluate a variable-impedance ceramic matrix composite acoustic liner that offers the potential to achieve each of these goals. One concern is the porosity of the ceramic matrix composite material, and whether this might affect the predictability of liners constructed with this material. Comparisons between two variable-depth liners, one constructed with ceramic matrix composite material and the other constructed via stereolithography, are used to demonstrate this material porosity is not a concern. Also, some interesting observations are noted regarding the orientation of variable-depth liners. Finally, two propagation codes are validated via comparisons of predicted and measured acoustic pressure profiles for a variable-depth liner.

42 CFR 423.2260 - Definitions concerning marketing materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM VOLUNTARY MEDICARE PRESCRIPTION DRUG BENEFIT Part D..., physicians or other providers). (v) Membership communication materials such as membership rules, subscriber... communications materials, meaning informational materials that— (i) Are targeted to current enrollees; (ii) Are...

How much Energy is Embodied in your Central Heating Boiler?

NASA Astrophysics Data System (ADS)

Koubogiannis, D.; Nouhou, C.

2016-11-01

Life Cycle Analysis (LCA) is an important tool in current research to quantitatively assess energy consumption and environmental impact of a building. In the context of LCA, the Embodied Energy (EE) related to the building and the corresponding Embodied CO2 emissions are valuable data. In such a case, these data concern the constitutive materials of the building and any subsystem, component or equipment in it. Usually, after calculating the mass of these materials, embodied energy values are estimated multiplying them by the corresponding EE coefficients concerning the production of these materials (EEMP). However, apart from transportation energy costs, another part of EE is that consumed for the manufacturing of any item as a finished product. The present work focuses on the manufacturing EE (EEMFG) of central heating boilers in Hellenic dwellings. Six typical boilers of different types are studied. Each of them is analyzed to its constitutive materials and its EEMP is estimated. For four of them, the boiler house where it was constructed in Greece was visited and data were collected. Based on them the corresponding boiler EEMFG values are estimated. The results concerning the EE for material production and manufacturing, as well as the results concerning the corresponding ECO2 values are discussed and assessed. Benchmark values correlating EE and ECO2 with the mass or the heat rate of the boiler are extracted.

Sound levels and their effects on children in a German primary school.

PubMed

Eysel-Gosepath, Katrin; Daut, Tobias; Pinger, Andreas; Lehmacher, Walter; Erren, Thomas

2012-12-01

Considerable sound levels are produced in primary schools by voices of children and resonance effects. As a consequence, hearing loss and mental impairment may occur. In a Cologne primary school, sound levels were measured in three different classrooms, each with 24 children, 8-10 years old, and one teacher. Sound dosimeters were positioned in the room and near the teacher's ear. Additional measurements were done in one classroom fully equipped with sound-absorbing materials. A questionnaire containing 12 questions about noise at school was distributed to 100 children, 8-10 years old. Measurements were repeated after children had been taught about noise damage and while "noise lights" were used. Mean sound levels of 5-h per day measuring period were 78 dB (A) near the teacher's ear and 70 dB (A) in the room. The average of all measured maximal sound levels for 1 s was 105 dB (A) for teachers, and 100 dB (A) for rooms. In the soundproofed classroom, Leq was 66 dB (A). The questionnaire revealed certain judgment of the children concerning situations with high sound levels and their ability to develop ideas for noise reduction. However, no clear sound level reduction was identified after noise education and using "noise lights" during lessons. Children and their teachers are equally exposed to high sound levels at school. Early sensitization to noise and the possible installation of sound-absorbing materials can be important means to prevent noise-associated hearing loss and mental impairment.

Risk and safety analysis for Florida commercial aerial application operations

NASA Astrophysics Data System (ADS)

Robbins, John Michael

The purpose of this study was to determine self-reported perceptions in the areas of agroterrorism, bioterrorism, chemical exposure and Federal Aviation Administration (FAA) oversight. The aerial application industry has been in existence since the 1920's with a gamut of issues ranging from pesticide drift to counterterrorism. The attacks of September 11th, 2001, caused a paradigm shift in the way the United States views security and, more importantly, the prevention of malicious activity. Through the proper implementation and dissemination of educational materials dealing with industry specific concerns, it is imperative that everyone has the proper level of resources and training to effectively manage terrorist threats. This research study was designed to interpret how aerial applicators view these topics of concern and how they perceive the current threat level of terrorism in the industry. Research results were consistent, indicating that a high number of aerial applicators in the state of Florida are concerned with these topics. As a result, modifications need to be made with respect to certain variables. The aerial application industry works day in and day out to provide a professional service that helps maintain the integrity of the food and commodities that we need to survive. They are a small percentage of the aviation community that we all owe a great deal for the vital and necessary services they provide.

A general strategy for the chemical aspects of the safety assessment of extractables and leachables in pharmaceutical drug products: the chemical assessment triad.

PubMed

Jenke, Dennis

2012-01-01

During the course of their manufacturing, storage, and administration, pharmaceutical drug products come in contact with materials, components, and systems. Such contact may result in an interaction between the drug product and these entities. One such interaction is the migration of substances from these entities and into the drug product, which is of concern due to the potential toxicity of the migrating substances. In order to properly assess the risk and manage the hazard posed by migratory substances, it is necessary to establish the identities of the migratory substances and the levels to which they will accumulate in the finished drug product, as these two pieces of information establish the hazard posed by an individual substance and the magnitude of the patient exposure (dose). The process by which migrating compounds are discovered and identified, and by which their accumulation levels in a finished drug product are established, is termed chemical assessment. Because the development of a finished drug product is a long and complicated process, chemical assessment is most typically not a single action but rather a series of actions that together establish a process of risk management. It is the purpose of this manuscript to establish a high-level strategy, illustrated in the chemical assessment triad, which can be applied to such a risk management process. During the course of their manufacturing, storage, and administration, pharmaceutical drug products come in contact with materials, components, and systems. Such contact may result in an interaction between the drug product and these entities. One such interaction is the migration of substances from these entities and into the drug product, which is of concern due to the potential toxicity of the migrating substances. It is the purpose of this manuscript to outline a high-level strategy, illustrated in the chemical assessment triad, to chemically establish the safety risk related to the migrating substances.

Parental perception on the efficacy of a physical activity program for preschoolers.

PubMed

Bellows, Laura; Silvernail, Sara; Caldwell, Lisa; Bryant, Angela; Kennedy, Cathy; Davies, Patricia; Anderson, Jennifer

2011-04-01

Childhood obesity is among the leading health concerns in the United States. The relationship between unmet physical activity needs in young children is of particular interest as the trend in childhood obesity continues to rise and unmet physical activity needs are identified. The preschool years are an influential time in promoting healthful lifestyle habits and early childhood interventions may help establish lifelong healthful behaviors which could help prevent obesity later in life. The Food Friends®: Get Movin' with Mighty Moves® is a preschool physical activity program which aims to improve children's gross motor skills and physical activity levels. The home environment and parental modeling are critical factors related to child physical activity in this population. The parent component, Mighty Moves®: Fun Ways to Keep Families Active and Healthy, was designed to address barriers in the home environment that lead to unmet physical activity needs in preschoolers and their families. The program and materials were designed based on Social Marketing tenets and Social Learning Theory principles. Four Colorado Head Start centers were assigned to an experimental group as part of the Mighty Moves® group randomized trial. Quantitative and qualitative evaluation methods were used to determine what messages and materials reached and motivated the target audience to increase physical activity levels. Results of the study indicated the program's materials helped families and children to be more physically active. Additionally, materials and material dissemination were revised to enhance program goals.

Peer reviewed: Characterizing aquatic dissolved organic matter

USGS Publications Warehouse

Leenheer, Jerry A.; Croué, Jean-Philippe

2003-01-01

Whether it causes aesthetic concerns such as color, taste, and odor; leads to the binding and transport of organic and inorganic contaminants; produces undesirable disinfection byproducts; provides sources and sinks for carbon; or mediates photochemical processes, the nature and properties of dissolved organic matter (DOM) in water are topics of significant environmental interest. DOM is also a major reactant in and product of biogeochemical processes in which the material serves as a carbon and energy source for biota and controls levels of dissolved oxygen, nitrogen, phosphorus, sulfur, numerous trace metals, and acidity.

Implementation of heaters on thermally actuated spacecraft mechanisms

NASA Technical Reports Server (NTRS)

Busch, John D.; Bokaie, Michael D.

1994-01-01

This paper presents general insight into the design and implementation of heaters as used in actuating mechanisms for spacecraft. Problems and considerations that were encountered during development of the Deep Space Probe and Science Experiment (DSPSE) solar array release mechanism are discussed. Obstacles included large expected fluctuations in ambient temperature, variations in voltage supply levels outgassing concerns, heater circuit design, materials selection, and power control options. Successful resolution of these issues helped to establish a methodology which can be applied to many of the heater design challenges found in thermally actuated mechanisms.

Zone leveling and solution growth of complex compound semiconductors in space

NASA Technical Reports Server (NTRS)

Bachmann, K. J.

1986-01-01

A research program on complex semiconducting compounds and alloys was completed that addressed the growth of single crystals of CdSe(y)Te(1-y), Zn(x)Cd(1-x)Te, Mn(x)Cd(1-x)Te, InP(y)As(1-y) and CuInSe2 and the measurement of fundamental physico-chemical properties characterizing the above materials. The purpose of this ground based research program was to lay the foundations for further research concerning the growth of complex ternary compound semiconductors in a microgravity environment.

Observations of mechanisms of attachment in the green alga Ulva mutabilis Føyn. An ultrastructural and light microscopical study of zygotes and rhizoids.

PubMed

Bråten, T

1975-01-01

The development of the rhizoid cells of the green alga Ulva mutabilis was investigated at the ultrastructural level paying special attention to the mechanism of attachment of the plant. Cytochemical data concerning the initial settling of the early zygote are also given. On the basis of histochemical staining and enzyme treatment it is concluded that the adhesive material secreted by the rhizoid cells is chemically different from that secreted by the zygote during the initial settling of the alga.

Contextual influences on environmental concerns cross-nationally: A multilevel investigation.

PubMed

Marquart-Pyatt, Sandra T

2012-09-01

Environmental issues continue to grow in international prominence, as environmental conditions are recognized as some of the most important problems facing the world. Research examining this globalization of environmental concern shown in public opinion surveys emphasizes the importance of context yet is currently underspecified. To address this gap, this research uses a multi-level, cross-national study to examine individual-level and country-level influences on three measures of environmental concern: environmental threat awareness, environmental efficacy, and willingness to pay. At the individual level, education, age, and gender affect environmental concerns. At the national level, economic, political, and environmental factors affect environmental concerns. Importantly, contextual factors differ in their effects depending on the dimension of environmental concern measured. Results from cross-level interactions for education confirm these complexities across these measures, supporting a dimensionality argument. The importance of the measurement of environmental concern shown in this research is emphasized for future cross-national scholarship. Copyright © 2012 Elsevier Inc. All rights reserved.

Linking Environmental Education with Environmental and Health Hazards in the Home. ERIC/SMEAC Environmental Education Digest No. 3, 1988.

ERIC Educational Resources Information Center

Howe, Robert W.

During the past several years, interest, concern, and action related to environmental problems have increased. Among the problems creating the concern have been materials that can cause pollution and biological damage in and near the home and the disposal of materials used in the home. Discussed in this digest are the reduction of problems related…

Sources of Information about Promising and Exemplary Programs and Materials for Secondary School Science. ERIC/SMEAC Science Education Digest No. 2, 1989.

ERIC Educational Resources Information Center

Helgeson, Stanley L.; Howe, Robert W.

Many school staff and their client communities are concerned about student achievement, skills, and attitudes related to science. To respond to these concerns, staff need to determine how they can improve their science programs by modifying the content and skills emphasized in the curriculum, changing and supplementing instructional materials,…

Sources of Information about Promising and Exemplary Programs and Materials for Elementary School Science. ERIC/SMEAC Science Education Digest No. 1, 1989.

ERIC Educational Resources Information Center

Helgeson, Stanley L.; Howe, Robert W.

Many school staff and their client communities are concerned about pupil achievement, skills, and attitudes related to science. To respond to these concerns, staff need to determine how they can improve their science programs by modifying the content and skills emphasized in the curriculum, changing and supplementing instructional materials,…

NTP-CERHR monograph on the potential human reproductive and developmental effects of di (2-ethylhexyl) phthalate (DEHP).

PubMed

Shelby, Michael D

2006-11-01

The National Toxicology Program (NTP) Center for the Evaluation of Risks to Human Reproduction (CERHR) conducted an updated evaluation of the potential for DEHP to cause adverse effects on reproduction and development in humans. The first CERHR expert panel evaluation of DEHP was completed in 2000 by the Phthalates Expert Panel. CERHR selected DEHP for an updated evaluation because of: (1) widespread human exposure, (2) public and government interest in adverse health effects, (3) recently available human exposure studies, and (4) the large number of relevant toxicity papers published since the earlier evaluation. DEHP (CAS RN: 117-81-7) is a high production volume chemical used as a plasticizer of polyvinyl chloride in the manufacture of a wide variety of consumer goods, such as building products, car products, clothing, food packaging, children's products (but not in toys intended for mouthing), and in medical devices made of polyvinyl chloride. The public can be exposed to DEHP by ingesting food, drink or dust that has been in contact with DEHP-containing materials, by inhaling contaminated air or dust, or by undergoing a medical procedure that uses polyvinyl chloride medical tubing or storage bags. It is estimated that the general population of the United States is exposed to DEHP levels ranging from 1 to 30 microg/kg bw/day (micrograms per kilogram body weight per day). The results of this DEHP update evaluation are published in an NTP-CERHR monograph that includes: (1) the NTP Brief, (2) the Expert Panel Update on the Reproductive and Developmental Toxicity of DEHP, and (3) public comments on the expert panel report. The NTP reached the following conclusions on the possible effects of exposure to DEHP on human development and reproduction. Note that the possible levels of concern, from lowest to highest, are negligible concern, minimal concern, some concern, concern, and serious concern. There is serious concern that certain intensive medical treatments of male infants may result in DEHP exposure levels that adversely affect development of the male reproductive tract. DEHP exposure from medical procedures in infants was estimated to be as high as 6000 microg/kg bw/day. There is concern for adverse effects on development of the reproductive tract in male offspring of pregnant and breast feeding women undergoing certain medical procedures that may result in exposure to high levels of DEHP. There is concern for effects of DEHP exposure on development of the male reproductive tract for infants less than one year old. Diet, mouthing of DEHP-containing objects, and certain medical treatments may lead to DEHP exposures that are higher than those experienced by the general population. There is some concern for effects of DEHP exposure on development of the reproductive tract of male children older than one year. As in infants, exposures of children to DEHP may be higher than in the general population. There is some concern for adverse effects of DEHP exposure on development of the male reproductive tract in male offspring of pregnant women not medically exposed to DEHP. Although DEHP exposures are assumed to be the same as for the general population, the developing male reproductive tract is sensitive to the adverse effects of DEHP. There is minimal concern for reproductive toxicity in adults exposed to DEHP at 1 - 30 microg/kg bw/day. This level of concern is not altered for adults medically exposed to DEHP. NTP will transmit the NTP-CERHR Monograph on DEHP to federal and state agencies, interested parties, and the public and it will be available in electronic PDF format on the CERHR web site http://cerhr.niehs.nih.gov and in printed text or CD-ROM from the CERHR.

[The effects of normal aging on face naming and recognition of famous people: battery 75].

PubMed

Pluchon, C; Simonnet, E; Toullat, G; Gil, R

2002-07-01

The difficulty to recall proper nouns is often something elderly people complain about. Thus, we tried to build and standardize a tool that could allow a quantified estimation of the naming and recognition abilities about famous people faces, specifying the part of gender, age and cultural level for each kind of test. The performances of 542 subjects divided in 3 age brackets and 3 academic knowledge levels were analysed. To carry out the test material, the artistic team of the Grevin Museum (Paris) was called upon. Their work offers a homogeneous way to shape famous people faces. One same person thus photographed 75 characters from different social categories with the same conditions of light, during only one day. The results of the study show that men perform better than women as concerns naming task, but that there's no difference between genders as concerns recognition task. Recognition performances are significantly better whatever the age, the gender and the cultural level may be. Generally, performances are all the more better since subjects are younger and have a higher cultural level. Our study then confirms the fact that normal aging goes hand in hand with rising difficulties to name faces. Moreover, results tend to show that recognition of faces remains better preserved and that the greater disability to recall a name is linked to difficulties in lexical accessing.

Evaluation of transmission risks associated with in vivo replication of several high containment pathogens in a biosafety level 4 laboratory

PubMed Central

Alimonti, Judie; Leung, Anders; Jones, Shane; Gren, Jason; Qiu, Xiangguo; Fernando, Lisa; Balcewich, Brittany; Wong, Gary; Ströher, Ute; Grolla, Allen; Strong, James; Kobinger, Gary

2014-01-01

Containment level 4 (CL4) laboratories studying biosafety level 4 viruses are under strict regulations to conduct nonhuman primate (NHP) studies in compliance of both animal welfare and biosafety requirements. NHPs housed in open-barred cages raise concerns about cross-contamination between animals, and accidental exposure of personnel to infectious materials. To address these concerns, two NHP experiments were performed. One examined the simultaneous infection of 6 groups of NHPs with 6 different viruses (Machupo, Junin, Rift Valley Fever, Crimean-Congo Hemorrhagic Fever, Nipah and Hendra viruses). Washing personnel between handling each NHP group, floor to ceiling biobubble with HEPA filter, and plexiglass between cages were employed for partial primary containment. The second experiment employed no primary containment around open barred cages with Ebola virus infected NHPs 0.3 meters from naïve NHPs. Viral antigen-specific ELISAs, qRT-PCR and TCID50 infectious assays were utilized to determine antibody levels and viral loads. No transmission of virus to neighbouring NHPs was observed suggesting limited containment protocols are sufficient for multi-viral CL4 experiments within one room. The results support the concept that Ebola virus infection is self-contained in NHPs infected intramuscularly, at least in the present experimental conditions, and is not transmitted to naïve NHPs via an airborne route. PMID:25059478

Evaluation of transmission risks associated with in vivo replication of several high containment pathogens in a biosafety level 4 laboratory.

PubMed

Alimonti, Judie; Leung, Anders; Jones, Shane; Gren, Jason; Qiu, Xiangguo; Fernando, Lisa; Balcewich, Brittany; Wong, Gary; Ströher, Ute; Grolla, Allen; Strong, James; Kobinger, Gary

2014-07-25

Containment level 4 (CL4) laboratories studying biosafety level 4 viruses are under strict regulations to conduct nonhuman primate (NHP) studies in compliance of both animal welfare and biosafety requirements. NHPs housed in open-barred cages raise concerns about cross-contamination between animals, and accidental exposure of personnel to infectious materials. To address these concerns, two NHP experiments were performed. One examined the simultaneous infection of 6 groups of NHPs with 6 different viruses (Machupo, Junin, Rift Valley Fever, Crimean-Congo Hemorrhagic Fever, Nipah and Hendra viruses). Washing personnel between handling each NHP group, floor to ceiling biobubble with HEPA filter, and plexiglass between cages were employed for partial primary containment. The second experiment employed no primary containment around open barred cages with Ebola virus infected NHPs 0.3 meters from naïve NHPs. Viral antigen-specific ELISAs, qRT-PCR and TCID50 infectious assays were utilized to determine antibody levels and viral loads. No transmission of virus to neighbouring NHPs was observed suggesting limited containment protocols are sufficient for multi-viral CL4 experiments within one room. The results support the concept that Ebola virus infection is self-contained in NHPs infected intramuscularly, at least in the present experimental conditions, and is not transmitted to naïve NHPs via an airborne route.

Transport properties of damaged materials. Cementitious barriers partnership

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langton, C.

2014-11-01

The objective of the Cementitious Barriers Partnership (CBP) project is to develop tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers used in low-level waste storage applications. One key concern for the long-term durability of concrete is the degradation of the cementitious matrix, which occurs as a result of aggressive chemical species entering the material or leaching out in the environment, depending on the exposure conditions. The objective of the experimental study described in this report is to provide experimental data relating damage in cementitious materials to changes in transport properties, whichmore » can eventually be used to support predictive model development. In order to get results within a reasonable timeframe and to induce as much as possible uniform damage level in materials, concrete samples were exposed to freezing and thawing (F/T) cycles. The methodology consisted in exposing samples to F/T cycles and monitoring damage level with ultrasonic pulse velocity measurements. Upon reaching pre-selected damage levels, samples were tested to evaluate changes in transport properties. Material selection for the study was motivated by the need to get results rapidly, in order to assess the relevance of the methodology. Consequently, samples already available at SIMCO from past studies were used. They consisted in three different concrete mixtures cured for five years in wet conditions. The mixtures had water-to-cement ratios of 0.5, 0.65 and 0.75 and were prepared with ASTM Type I cement only. The results showed that porosity is not a good indicator for damage caused by the formation of microcracks. Some materials exhibited little variations in porosity even for high damage levels. On the other hand, significant variations in tortuosity were measured in all materials. This implies that damage caused by internal pressure does not necessarily create additional pore space in the microstructure, but likely creates new thin pathways between existing pore space for species to travel. These results have a significant impact on modeling efforts. Models relating porosity to tortuosity and permeability are unlikely to provide the correct basis for predicting long-term durability of concrete sustaining internal pressures and microcrack formation. Other avenues like the modeling of internal crystallization pressure need to be explored.« less

Toward the characterization of biological toxins using field-based FT-IR spectroscopic instrumentation

NASA Astrophysics Data System (ADS)

Schiering, David W.; Walton, Robert B.; Brown, Christopher W.; Norman, Mark L.; Brewer, Joseph; Scott, James

2004-12-01

IR spectroscopy is a broadly applicable technique for the identification of covalent materials. Recent advances in instrumentation have made Fourier Transform infrared (FT-IR) spectroscopy available for field characterization of suspect materials. Presently, this instrumentation is broadly deployed and used for the identification of potential chemical hazards. This discussion concerns work towards expanding the analytical utility of field-based FT-IR spectrometry in the characterization of biological threats. Two classes of materials were studied: biologically produced chemical toxins which were non-peptide in nature and peptide toxin. The IR spectroscopic identification of aflatoxin-B1, trichothecene T2 mycotoxin, and strychnine was evaluated using the approach of spectral searching against large libraries of materials. For pure components, the IR method discriminated the above toxins at better than the 99% confidence level. The ability to identify non-peptide toxins in mixtures was also evaluated using a "spectral stripping" search approach. For the mixtures evaluated, this method was able to identify the mixture components from ca. 32K spectral library entries. Castor bean extract containing ricin was used as a representative peptide toxin. Due to similarity in protein spectra, a SIMCA pattern recognition methodology was evaluated for classifying peptide toxins. In addition to castor bean extract the method was validated using bovine serum albumin and myoglobin as simulants. The SIMCA approach was successful in correctly classifying these samples at the 95% confidence level.

Readability of ASPS and ASAPS educational web sites: an analysis of consumer impact.

PubMed

Aliu, Oluseyi; Chung, Kevin C

2010-04-01

Patients use the Internet to educate themselves about health-related topics, and learning about plastic surgery is a common activity for enthusiastic consumers in the United States. How to educate consumers regarding plastic surgical procedures is a continued concern for plastic surgeons when faced with the growing portion of the American population having relatively low health care literacy. The usefulness of health-related education materials on the Internet depends largely on their comprehensibility and understandability for all who visit the Web sites. The authors studied the readability of patient education materials related to common plastic surgery procedures from the American Society of Plastic Surgeons (ASPS) and the American Society for Aesthetic Plastic Surgery (ASAPS) Web sites and compared them with materials on similar topics from 10 popular health information-providing sites. The authors found that all analyzed documents on the ASPS and ASAPS Web sites targeted to the consumers were rated to be more difficult than the recommended reading grade level for most American adults, and these documents were consistently among the most difficult to read when compared with the other health information Web sites. The Internet is an increasingly popular avenue for patients to educate themselves about plastic surgery procedures. Patient education material provided on ASPS and ASAPS Web sites should be written at recommended reading grade levels to ensure that it is readable and comprehensible to the targeted audience.

Achieving Affective Competencies through the Teacher Concerns-Self Confrontation Model of Personalized Teacher Education.

ERIC Educational Resources Information Center

Fuller, Frances F.

A three-level model was derived from the literature on motivation and behavior change processes and from specific research on teacher concerns and self-confrontation. Teacher concerns comprise the first level of the model: concerns about self, task, and pupils. Self-confrontation feedback and behavior change procedures comprise the second level:…

Cementitious materials for thin patches : final report.

DOT National Transportation Integrated Search

2001-06-01

Ten cementitious patching materials, which were suitable for thin, vertical repairs according to the manufacturers, were evaluated. Compatibility with cathodic protection systems was a particular concern. The materials were tested for propensity to c...

Time dependent fracture and cohesive zones

NASA Technical Reports Server (NTRS)

Knauss, W. G.

1993-01-01

This presentation is concerned with the fracture response of materials which develop cohesive or bridging zones at crack tips. Of special interest are concerns regarding crack stability as a function of the law which governs the interrelation between the displacement(s) or strain across these zones and the corresponding holding tractions. It is found that for some materials unstable crack growth can occur, even before the crack tip has experienced a critical COD or strain across the crack, while for others a critical COD will guarantee the onset of fracture. Also shown are results for a rate dependent nonlinear material model for the region inside of a craze for exploring time dependent crack propagation of rate sensitive materials.

Calculation of the shrinkage-induced residual stress in a viscoelastic dental restorative material

NASA Astrophysics Data System (ADS)

Grassia, Luigi; D'Amore, Alberto

2013-02-01

A procedure able to describe the curing process of a particulate composite material used in a dental restoration is developed in the ANSYS environment. The material under concern is a multifunctional methacrylate-based composite for dental restoration, activated by visible light. The model accounts for the dependence of the viscoelastic functions on temperature and degree of cure. Three geometries have been considered in the analysis that are representative of three different classes of dental restoration and mainly differ by the C (constrained)-factor, (i.e. the bounded to unbounded surface ratio). It was found that the temperature could give a necrosis in the vicinity of the tooth nerve and that the average stress at the interface between the composite and the tooth scales exponentially with the C-factor. The residual stress at the dental restoration interface is also compared with the uniaxial tensile strength of twelve commercially available composite materials: it clearly appears that the level of residual stress may overcome the strength of the composite, especially at high C-factors.

Characterization of holding brake friction pad surface after pin-on-plate wear test

NASA Astrophysics Data System (ADS)

Drago, N.; Gonzalez Madruga, D.; De Chiffre, L.

2018-03-01

This article concerns the metrological characterization of the surface on a holding brake friction material pin after a pin-on-plate (POP) wear test. The POP test induces the formation of surface plateaus that affect brake performances such as wear, friction, noise and heat. Three different materials’ surfaces have been characterized after wear from data obtained with a focus variation 3D microscope. A new surface characterization approach with plateau identification is proposed, using the number of plateau on the surface, equivalent diameter, length and breadth as measurands. The identification method is based on determining and imposing ISO 27158-2 lower plateau limit (LPL) in material probability curves; and on applying a combined criterion of height segmentation threshold and equivalent diameter threshold. The method determines the criterion thresholds for each material since LPL appears typical by material. The proposed method has allowed quantifying the surface topography at two different levels of wear. An expanded measurement uncertainty of 3.5 µm for plateau dimensions in the range 50–2000 µm and one of 0.15 µm for plateau heights up to 10 µm have been documented.

Lead, cadmium and mercury levels in pregnancy: the need for international consensus on levels of concern.

PubMed

Taylor, C M; Golding, J; Emond, A M

2014-02-01

For heavy metals that have any degree of transfer though the placenta to the fetus, it is unlikely that there are safe limits for maternal blood levels. The only means of reducing fetal exposure is to minimise maternal exposure. There are few recommendations for levels of concern. With the exception of US recommendations for maternal Pb levels, but there are no international levels of concern or cut-off levels specifically for pregnancy for heavy metals, so that comparisons can generally only be made with national reference values relating to similar physiological statuses or age groups. These include recommendations for Cd levels by Germany (reference value for non-smoking adults aged 18-69 years, 1 µg/l) and for Hg by Germany (reference value for adults age 18-60 years with fish intake < or =3 times per month, 2.0 µg/l) and the USA (cut-off level for women, 5.8 µg/dl). To illustrate the lack of cohesion, we present data on blood Pb, Cd and Hg levels from pregnant women enroled in the UK Avon Longitudinal Study of Parents and Children study and compare the values with present levels of concern and recommended cut-off values. We also compare the levels with those found in other groups of pregnant women worldwide to strengthen the database for the development of levels of concern in pregnancy. The need for clarity of terminology in describing levels of concern is discussed. There is a pressing need for international consensus on levels of concern for all age groups and physiological statuses, particularly for pregnancy.

Assessed and Experimentally Provided Social Support.

DTIC Science & Technology

1983-10-18

concerning attachment have encouraged research into the supportive role of social relationships among both adults and children (Bowlby 1969, 1980...irrelevant material than did those low in SSQS. It may be that the task material had less motivating quality for people who feel secure in their social ... relationships . They may have allowed their minds to wander because the task appeared so easy to them. The results concerning the interaction between

Intrinsic and extrinsic motivation for smoking cessation.

PubMed

Curry, S; Wagner, E H; Grothaus, L C

1990-06-01

An intrinsic-extrinsic model of motivation for smoking cessation was evaluated with 2 samples (ns = 1.217 and 151) of smokers who requested self-help materials for smoking cessation. Exploratory and confirmatory principal components analysis on a 36-item Reasons for Quitting (RFQ) scale supported the intrinsic-extrinsic motivation distinction. A 4-factor model, with 2 intrinsic dimensions (concerns about health and desire for self-control) and 2 extrinsic dimensions (immediate reinforcement and social influence), was defined by 20 of the 36 RFQ items. The 20-item measure demonstrated moderate to high levels of internal consistency and convergent and discriminant validity. Logistic regression analyses indicated that smokers with higher levels of intrinsic relative to extrinsic motivation were more likely to achieve abstinence from smoking.

Development of Translation Materials to Assess International Students' Mental Health Concerns

ERIC Educational Resources Information Center

Chalungsooth, Pornthip; Schneller, Gregory R.

2011-01-01

International college students in the United States often face adjustment difficulties; therefore, cultural sensitivity is necessary to help them express their concerns. This article describes the development of translations of international students' common mental health concerns into 7 languages. Suggestions for the use of translated materials…

Guidance on managing dredged material contaminated with dioxins and furans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chase, T.; Dillon, T.

Approximately 400 million cubic yards of sediment are dredged from US navigation channels every year. While the vast majority of the dredged material are clean and thereby suitable for aquatic disposal, a portion of the dredged material are contaminated with chemicals that may pose risks to human health and the ecological health of the aquatic environment. Contaminated dredged materials are most frequently found downstream of industrial and municipal sewage-treatment discharges; non-point sources of pollution (e.g., urban and agricultural runoff) also contribute to contamination of dredged materials. An increasing amount of dredged materials are being identified through more sophisticated testing regimesmore » to pose potentially adverse risks to human health and the aquatic environment. One particular class of chemicals that raises concern when regulating dredged material disposal is dioxin, which has been found in sediment in a number of locations, including New Jersey/New York Harbor. Further testing will likely find that dredged materials are contaminated with low levels of dioxin across the country. Decision makers in the EPA and the USACE are guided by numerous statutory mandates and regulations. Within that framework, judgments about the suitability of dredged material for aquatic disposal are made based upon a tiered testing and evaluative process. Recently, the EPA and the USACE have been working to incorporate risk-based evaluation procedures into the dredged material decision-making process. This paper discusses such efforts to date and the preliminary recommendations for evaluating the potential effects of dioxin contaminated dredged material.« less

An Innovative Approach to Control Steel Reinforcement Corrosion by Self-Healing.

PubMed

Koleva, Dessi A

2018-02-20

The corrosion of reinforced steel, and subsequent reinforced concrete degradation, is a major concern for infrastructure durability. New materials with specific, tailor-made properties or the establishment of optimum construction regimes are among the many approaches to improving civil structure performance. Ideally, novel materials would carry self-repairing or self-healing capacities, triggered in the event of detrimental influence and/or damage. Controlling or altering a material's behavior at the nano-level would result in traditional materials with radically enhanced properties. Nevertheless, nanotechnology applications are still rare in construction, and would break new ground in engineering practice. An approach to controlling the corrosion-related degradation of reinforced concrete was designed as a synergetic action of electrochemistry, cement chemistry and nanotechnology. This contribution presents the concept of the approach, namely to simultaneously achieve steel corrosion resistance and improved bulk matrix properties. The technical background and challenges for the application of polymeric nanomaterials in the field are briefly outlined in view of this concept, which has the added value of self-healing. The credibility of the approach is discussed with reference to previously reported outcomes, and is illustrated via the results of the steel electrochemical responses and microscopic evaluations of the discussed materials.

Hazardous Materials Routing Study Phase I: Establishing Hazardous Materials Truck Routes for Shipments Through the Dallas-Fort Worth Area

DOT National Transportation Integrated Search

1985-10-01

The transportation of hazardous materials over streets and highways in the Dallas-Fort Worth area has become a significant transportation safety concern. Recent accidents involving vehicles transporting hazardous materials have resulted in extensive ...

Health Concerns of Young Adolescents.

ERIC Educational Resources Information Center

Sobal, Jeffery

1987-01-01

Examined health concerns of 278 urban junior high school students. Highest levels of concerns pertained to dental health, friendships, nutrition, and sex; lowest levels pertained to smoking, birth control, pregnancy, and homosexuality. Younger, female, and less healthy students expressed greater health concerns. (Author/NB)

The material co-construction of hard science fiction and physics

NASA Astrophysics Data System (ADS)

Hasse, Cathrine

2015-12-01

This article explores the relationship between hard science fiction and physics and a gendered culture of science. Empirical studies indicate that science fiction references might spur some students' interest in physics and help develop this interest throughout school, into a university education and even further later inspire the practice of doing science. There are many kinds of fiction within the science fiction genre. In the presented empirical exploration physics students seem particularly fond of what is called `hard science fiction': a particular type of science fiction dealing with technological developments (Hartwell and Cramer in The hard SF renaissance, Orb/TOR, New York, 2002). Especially hard science fiction as a motivating fantasy may, however, also come with a gender bias. The locally materialized techno-fantasies spurring dreams of the terraforming of planets like Mars and travels in time and space may not be shared by all physics students. Especially female students express a need for other concerns in science. The entanglement of physics with hard science fiction may thus help develop some students' interest in learning school physics and help create an interest for studying physics at university level. But research indicates that especially female students are not captured by the hard techno-fantasies to the same extent as some of their male colleagues. Other visions (e.g. inspired by soft science fiction) are not materialized as a resource in the local educational culture. It calls for an argument of how teaching science is also teaching cultural values, ethics and concerns, which may be gendered. Teaching materials, like the use of hard science fiction in education, may not just be (yet another) gender bias in science education but also carrier of particular visions for scientific endeavours.

Nuclear criticality safety bounding analysis for the in-tank-precipitation (ITP) process, impacted by fissile isotopic weight fractions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bess, C.E.

The In-Tank Precipitation process (ITP) receives High Level Waste (HLW) supernatant liquid containing radionuclides in waste processing tank 48H. Sodium tetraphenylborate, NaTPB, and monosodium titanate (MST), NaTi{sub 2}O{sub 5}H, are added for removal of radioactive Cs and Sr, respectively. In addition to removal of radio-strontium, MST will also remove plutonium and uranium. The majority of the feed solutions to ITP will come from the dissolution of supernate that had been concentrated by evaporation to a crystallized salt form, commonly referred to as saltcake. The concern for criticality safety arises from the adsorption of U and Pt onto MST. If sufficientmore » mass and optimum conditions are achieved then criticality is credible. The concentration of u and Pt from solution into the smaller volume of precipitate represents a concern for criticality. This report supplements WSRC-TR-93-171, Nuclear Criticality Safety Bounding Analysis For The In-Tank-Precipitation (ITP) Process. Criticality safety in ITP can be analyzed by two bounding conditions: (1) the minimum safe ratio of MST to fissionable material and (2) the maximum fissionable material adsorption capacity of the MST. Calculations have provided the first bounding condition and experimental analysis has established the second. This report combines these conditions with canyon facility data to evaluate the potential for criticality in the ITP process due to the adsorption of the fissionable material from solution. In addition, this report analyzes the potential impact of increased U loading onto MST. Results of this analysis demonstrate a greater safety margin for ITP operations than the previous analysis. This report further demonstrates that the potential for criticality in the ITP process due to adsorption of fissionable material by MST is not credible.« less

A semi-empirical model for the prediction of fouling in railway ballast using GPR

NASA Astrophysics Data System (ADS)

Bianchini Ciampoli, Luca; Tosti, Fabio; Benedetto, Andrea; Alani, Amir M.; Loizos, Andreas; D'Amico, Fabrizio; Calvi, Alessandro

2016-04-01

The first step in the planning for a renewal of a railway network consists in gathering information, as effectively as possible, about the state of the railway tracks. Nowadays, this activity is mostly carried out by digging trenches at regular intervals along the whole network, to evaluate both geometrical and geotechnical properties of the railway track bed. This involves issues, mainly concerning the invasiveness of the operations, the impacts on the rail traffic, the high costs, and the low levels of significance concerning such discrete data set. Ground-penetrating radar (GPR) can represent a useful technique for overstepping these issues, as it can be directly mounted onto a train crossing the railway, and collect continuous information along the network. This study is aimed at defining an empirical model for the prediction of fouling in railway ballast, by using GPR. With this purpose, a thorough laboratory campaign was implemented within the facilities of Roma Tre University. In more details, a 1.47 m long × 1.47 m wide × 0.48 m height plexiglass framework, accounting for the domain of investigation, was laid over a perfect electric conductor, and filled up with several configuration of railway ballast and fouling material (clayey sand), thereby representing different levels of fouling. Then, the set of fouling configurations was surveyed with several GPR systems. In particular, a ground-coupled multi-channel radar (600 MHz and 1600 MHz center frequency antennas) and three air-launched radar systems (1000 MHz and 2000 MHz center frequency antennas) were employed for surveying the materials. By observing the results both in terms of time and frequency domains, interesting insights are highlighted and an empirical model, relating in particular the shape of the frequency spectrum of the signal and the percentage of fouling characterizing the surveyed material, is finally proposed. Acknowledgement The Authors thank COST, for funding the Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar."

From molecular chemistry to hybrid nanomaterials. Design and functionalization.

PubMed

Mehdi, Ahmad; Reye, Catherine; Corriu, Robert

2011-02-01

This tutorial review reports upon the organisation and functionalization of two families of hybrid organic-inorganic materials. We attempted to show in both cases the best ways permitting the organisation of materials in terms of properties at the nanometric scale. The first family concerns mesoporous hybrid organic-inorganic materials prepared in the presence of a structure-directing agent. We describe the functionalization of the channel pores of ordered mesoporous silica, that of the silica framework, as well as the functionalization of both of them simultaneously. This family is currently one of the best supports for exploring polyfunctional materials, which can provide a route to interactive materials. The second family concerns lamellar hybrid organic-inorganic materials which is a new class of nanostructured materials. These materials were first obtained by self-assembly, as a result of van der Waals interactions of bridged organosilica precursors containing long alkylene chains during the sol-gel process, without any structure directing agent. This methodology has been extended to functional materials. It is also shown that such materials can be obtained from monosilylated precursors.

Fundamental awareness: A framework for integrating science, philosophy and metaphysics

PubMed Central

Theise, Neil D.; Kafatos, Menas C.

2016-01-01

ABSTRACT The ontologic framework of Fundamental Awareness proposed here assumes that non-dual Awareness is foundational to the universe, not arising from the interactions or structures of higher level phenomena. The framework allows comparison and integration of views from the three investigative domains concerned with understanding the nature of consciousness: science, philosophy, and metaphysics. In this framework, Awareness is the underlying reality, not reducible to anything else. Awareness and existence are the same. As such, the universe is non-material, self-organizing throughout, a holarchy of complementary, process driven, recursive interactions. The universe is both its own first observer and subject. Considering the world to be non-material and comprised, a priori, of Awareness is to privilege information over materiality, action over agency and to understand that qualia are not a “hard problem,” but the foundational elements of all existence. These views fully reflect main stream Western philosophical traditions, insights from culturally diverse contemplative and mystical traditions, and are in keeping with current scientific thinking, expressible mathematically. PMID:27489576

Fundamental awareness: A framework for integrating science, philosophy and metaphysics.

PubMed

Theise, Neil D; Kafatos, Menas C

2016-01-01

The ontologic framework of Fundamental Awareness proposed here assumes that non-dual Awareness is foundational to the universe, not arising from the interactions or structures of higher level phenomena. The framework allows comparison and integration of views from the three investigative domains concerned with understanding the nature of consciousness: science, philosophy, and metaphysics. In this framework, Awareness is the underlying reality, not reducible to anything else. Awareness and existence are the same. As such, the universe is non-material, self-organizing throughout, a holarchy of complementary, process driven, recursive interactions. The universe is both its own first observer and subject. Considering the world to be non-material and comprised, a priori, of Awareness is to privilege information over materiality, action over agency and to understand that qualia are not a "hard problem," but the foundational elements of all existence. These views fully reflect main stream Western philosophical traditions, insights from culturally diverse contemplative and mystical traditions, and are in keeping with current scientific thinking, expressible mathematically.

Vibration reduction of a woven composite fan blade by piezoelectric shunted devices

NASA Astrophysics Data System (ADS)

Thierry, Olivier; De Smet, Olivier; Deü, Jean-François

2016-09-01

This study concerns the vibration reduction in the low frequency range of a composite fan blade of a turbojet engine with piezoelectric devices. The interest is to increase lifespan and avoid flutter phenomena by reducing the vibration amplitude. The solution considered in the work consists in using piezoelectric elements connected to a passive electric circuit usually called shunt. The use of woven composite materials for fan blades enables to plan on embedding piezoelectric materials, for instance in the form of patches inserted between the composite and the coating material. The work presented during this conference will illustrate the feasibility of a piezoelectric shunted device integrated in an industrial application that doesn't require electrical supply. For such a structure, it is shown that a purely passive resonant shunt can significantly reduce the level of vibration of the second bending mode and that a good correlation between experiments and simulations validates the best fitting finite element model.

Fire Signatures of Materials Used in Spacecraft Construction

NASA Technical Reports Server (NTRS)

Taylor, Christina

2003-01-01

The focus of my work this summer was fire safety, specifically determining fire signatures from the combustion of materials commonly found in the construction of spacecraft. This project was undertaken with the aim of addressing concerns for health and safety onboard spacecraft. Under certain conditions, burning electronics produce surprisingly large amounts of acrid smoke, release fine airborne particles and expel condensable aerosols. Similarly, some wire insulation and packing material evolves smoke when in contact with a hot surface. In the limited, enclosed space available on spacecraft, these combustion products may pose a nuisance at the very least - at worst, a hazard to health or equipment. There is also a concern for fire safety in early detection on spacecraft. Our goal for the summer was to determine the most effective methods to test the materials, develop a protocol for sampling, and generate samples for analysis. We restricted our testing to electronic components, packaging and insulation materials, and wire insulation materials.

The Charging of Composites in the Space Environment

NASA Technical Reports Server (NTRS)

Czepiela, Steven A.

1997-01-01

Deep dielectric charging and subsequent electrostatic discharge in composite materials used on spacecraft have become greater concerns since composite materials are being used more extensively as main structural components. Deep dielectric charging occurs when high energy particles penetrate and deposit themselves in the insulating material of spacecraft components. These deposited particles induce an electric field in the material, which causes the particles to move and thus changes the electric field. The electric field continues to change until a steady state is reached between the incoming particles from the space environment and the particles moving away due to the electric field. An electrostatic discharge occurs when the electric field is greater than the dielectric strength of the composite material. The goal of the current investigation is to investigate deep dielectric charging in composite materials and ascertain what modifications have to be made to the composite properties to alleviate any breakdown issues. A 1-D model was created. The space environment, which is calculated using the Environmental Workbench software, the composite material properties, and the electric field and voltage boundary conditions are input into the model. The output from the model is the charge density, electric field, and voltage distributions as functions of the depth into the material and time. Analysis using the model show that there should be no deep dielectric charging problem with conductive composites such as carbon fiber/epoxy. With insulating materials such as glass fiber/epoxy, Kevlar, and polymers, there is also no concern of deep dielectric charging problems with average day-to-day particle fluxes. However, problems can arise during geomagnetic substorms and solar particle events where particle flux levels increase by several orders of magnitude, and thus increase the electric field in the material by several orders of magnitude. Therefore, the second part of this investigation was an experimental attempt to measure the continuum electrical properties of a carbon fiber/epoxy composite, and to create a composite with tailorable conductivity without affecting its mechanical properties. The measurement of the conductivity and dielectric strength of carbon fiber/epoxy composites showed that these properties are surface layer dominated and difficult to measure. In the second experimental task, the conductivity of a glass fiber/epoxy composite was increased by 3 orders of magnitude, dielectric constant was increased approximately by a factor of 16, with minimal change to the mechanical properties, by adding conductive carbon black to the epoxy.

Assessment of suitability of some chosen functions for describing of sorption isotherms in building materials

NASA Astrophysics Data System (ADS)

Stolarska, Agata; Garbalińska, Halina

2017-05-01

This paper presents results of tests and studies conducted on six common building materials, used for constructing and finishing of external walls. These included: ceramic brick, silicate brick, autoclaved aerated concrete, cement mortar, cement-lime mortar and cement mortar modified with polypropylene fibers. Each of these materials is distinguished by the other structure of porousness, affecting both the course of sorption processes and the isotherms obtained. At first, measurements of moisture sorption kinetics at temperatures of 5, 20 and 35 °C were performed, each time at six levels of relative humidity. Then, when the sorption processes expired, equilibrium moisture sorption values were determined for the materials in 18 individual temperature and humidity conditions. The experimental data were used to determine the sorption isotherm courses for each material at the three temperatures. Then, theoretical analysis was performed in order to determine, which of the models available in the literature described the sorption isotherms of the concerned building materials the best. For each material and each of the three temperature values, twenty-four equations were tested. In each case, those of them were identified which ensured the best matching between the theoretical courses and the experimental data. The obtained results indicate that the Chen's model proved to be the most versatile. It ensured a detailed description of the sorption isotherms for each material and temperature tested.

A toxicologic and dermatologic assessment of cinnamyl phenylpropyl materials when used as fragrance ingredients.

PubMed

Belsito, D; Bickers, D; Bruze, M; Calow, P; Dagli, M; Fryer, A D; Greim, H; Miyachi, Y; Saurat, J H; Sipes, I G

2011-12-01

The cinnamyl phenylpropyl fragrance ingredients are a diverse group of chemical structures that have similar metabolic and toxicity profiles. A toxicological and dermatological review of these fragrance ingredients is presented. The common characteristic structural element of cinnamyl phenylpropyl materials is an aryl substituted primary alcohol/aldehyde/ester. For high end users, calculated maximum dermal exposures vary from 0.14% to 0.72%; systemic exposures vary from 0.0002 to 0.0280 mg/kg/day. Human dermatological studies show that these materials are not generally irritants or sensitizers at lower exposures from consumer products. Reactions (0.9%) in fragrance sensitive patients were observed with 3-phenyl-1-propanol at 5% in petrolatum. The cinnamyl phenylpropyl materials had low acute toxicity and no significant toxicity in repeat dose oral or dermal toxicity studies. No mutagenic or genotoxic activity in bacteria and mammalian cell line assays was observed. The cinnamyl phenylpropyl alcohol materials participate in the same beta oxidation pathways as their parent cinnamic acid derivatives, including common routes of absorption, distribution, and metabolic detoxification, and exhibit similar toxicological endpoints. Based on the review of available data, it is concluded that these materials would not present a safety concern at current levels of use as fragrance ingredients. Copyright © 2011 Elsevier Ltd. All rights reserved.

Terrestrial Sources of X-Ray Radiation and Their Effects on NASA Flight Hardware

NASA Technical Reports Server (NTRS)

Kniffin, Scott

2016-01-01

X-rays are an energetic and penetrating form of ionizing electromagnetic radiation, which can degrade NASA flight hardware. The main concern posed by such radiation is degradation of active electronic devices and, in some cases, diodes. Non-electronic components are only damaged at doses that far exceed the point where any electronic device would be destroyed. For the purposes of this document, flight hardware can be taken to mean an entire instrument, the flight electronics within the instrument or the individual microelectronic devices in the flight electronics. This document will discuss and describe the ways in which NASA flight hardware might be exposed to x-rays, what is and isn't a concern, and how to tell the difference. First, we must understand what components in flight hardware may be vulnerable to degradation or failure as a result of being exposed to ionizing radiation, such as x-rays. As stated above, bulk materials (structural metals, plastics, etc.) are generally only affected by ionizing radiation at very high dose levels. Likewise, passive electronic components (e.g. resistors, capacitors, most diodes) are strongly resistant to exposure to x-rays, except at very high doses. The main concerns arise when active components, that is, components like discrete transistors and microelectronic devices, are exposed to ionizing radiation. Active components are designed to respond to minute changes in currents and voltages in the circuit. As such, it is not surprising that exposure to ionizing radiation, which creates ionized and therefore electrically active particles, may degrade the way the hardware performs. For the most part, the mechanism for this degradation is trapping of the charges generated by ionizing radiation by defects in dielectric materials in the hardware. As such, the degree of damage is a function of both the quantity of ionizing radiation exposure and the physical characteristics of the hardware itself. The metric that describes the level of exposure to ionizing radiation is total ionizing dose (TID). The unit of TID is the rad, which is defined as 100 ergs absorbed per gram of material. Dose can be expressed in other units, for example grays (gy), where 1 gy = 100 rads. The actual fluence of radiation needed to deliver a rad depends on the absorbing material, so units of dose are usually stated in reference to the material of interest. That is, for microelectronic devices, the unit of dose is generally rad (Si) or rad (SiO2). However, the definition of absorbed dose in this fashion has the advantage that the type of radiation causing the ionization can be normalized so that a realistic and adequate comparison can be made. The sensitivity of microelectronic parts to TID varies over many orders of magnitude. (Note: Doses to humans are typically expressed in rems-or roentgen-equivalent-man-which measures tissue damage, and depends on the type of radiation, as well as the dose in rads.) Thus far, the "softest" parts tested at NASA showed damage at 500 rads (Si), while parts that are radiation-hardened by design can remain functional to doses on the order of 107 rads (Si). This broad range of sensitivity highlights one of the most important considerations when considering the effects of radiation on electronic parts: In order to determine whether a radiation exposure is a concern for a particular part, one must understand the technologies used in the part and their vulnerabilities to TID damage. A NASA radiation expert should be consulted to obtain such information.

A Rapid Survey of the Compatibility of Selected Seal Materials with Conventional and Semi-Synthetic JP-8

NASA Technical Reports Server (NTRS)

Graham, John L.; Striebich, Richard C.; Minus, Donald K.; Harrison, William E., III

2007-01-01

Since the synthesis of a liquid hydrocarbon fuel from coal by Franz Fischer and Hans Tropsch in 1923, there has been cyclic interest in developing this fuel for military and commercial applications. In recent years the U.S. Department of Defense has taken interest in producing a unified battlespace fuel using the Fischer Tropsch (FT) process for a variety of reasons including cost, quality, and logistics. In the past year there has been a particular emphasis on moving quickly to demonstrate that an FT fuel can be used in the form of a blend with conventional petroleum-derived jet fuel. The initial objective is to employ this semi-synthetic fuel with blend ratios as high as 50 percent FT with longer range goals to use even high blend ratios and ultimately a fully synthetic jet fuel. A significant concern associated with the use of a semi-synthetic jet fuel with high FT blend ratios is the effect these low aromatic fuels will have on fuel-wetted polymeric materials, most notably seals and sealants. These materials typically swell and soften to some degree when exposed to jet fuel and the aromatic content of these fuels contribute to this effect. Semi-synthetic jet fuels with very low aromatic contents may cause seals and sealants to shrink and harden leading to acute or chronic failure. Unfortunately, most of the material qualification tests are more concerned with excessive swelling than shrinkage and there is little guidance offered as to an acceptable level of shrinkage or other changes in physical properties related to low aromatic content. Given the pressing need for guidance data, a program was developed to rapidly survey the volume swell of selected fuel-wetted materials in a range of conventional and semi-synthetic jet fuels and through a statistical analysis to make a determination as to whether there was a basis to be concerned about using fuels with FT blend ratios as high as 50 percent. Concurrent with this analysis data was obtained as to the composition of the fuel absorbed in fuel-wetted materials through the use of GC-MS analysis of swollen samples as well as other supporting data. In this presentation the authors will present a summary of the results of the volume swell and fuel absorbed by selected O-rings and sealants as well as a description of the measurement protocols developed for this program.

Material and energy recovery in integrated waste management systems: a life-cycle costing approach.

PubMed

Massarutto, Antonio; de Carli, Alessandro; Graffi, Matteo

2011-01-01

A critical assumption of studies assessing comparatively waste management options concerns the constant average cost for selective collection regardless the source separation level (SSL) reached, and the neglect of the mass constraint. The present study compares alternative waste management scenarios through the development of a desktop model that tries to remove the above assumption. Several alternative scenarios based on different combinations of energy and materials recovery are applied to two imaginary areas modelled in order to represent a typical Northern Italian setting. External costs and benefits implied by scenarios are also considered. Scenarios are compared on the base of the full cost for treating the total waste generated in the area. The model investigates the factors that influence the relative convenience of alternative scenarios. Copyright © 2011 Elsevier Ltd. All rights reserved.

Hazardous Materials Information System (HMIS) Data Quality Review

DOT National Transportation Integrated Search

1997-05-01

The Hazardous Materials Information System (HMIS) is used to manage data required for the use, transportation, storage and disposal of hazardous material by the US Government. In response to concerns expressed by some users, DORO was tasked to conduc...

Pharmaceutical pictograms: a model for development and testing for comprehension and utility.

PubMed

Montagne, Michael

2013-01-01

With concerns about the medication literacy skills of patients comes the need to develop various types of information materials that will enhance understanding and drug use. To review pictogram development projects and to propose a model for pharmaceutical pictogram development and testing for comprehension and use. Previous efforts in developing specific types of pictograms in engineering and safety as well as in health care and pharmacy are collected and summarized in terms of level of comprehension and recall. The impact of pictogram-enhanced medication information materials on knowledge acquisition, information retention, and adherence is assessed. Pictograms are a key component in re-designing medication information to improve comprehension, recall, and adherence. Many types of pictograms still produce low levels of comprehension and the impact of pictograms on medication knowledge is inconsistent. Prior training through patient counseling on the intended meaning and use of pictograms greatly increases their effectiveness. A model for the development and testing of pictograms and pictogram sequences for comprehension and use in medication information is presented and discussed. Copyright © 2013 Elsevier Inc. All rights reserved.

Variation in heavy metals and microelements in South African medicinal plants obtained from street markets.

PubMed

Street, R A; Kulkarni, M G; Stirk, W A; Southway, C; Van Staden, J

2008-08-01

South African medicinal plants are traditionally harvested from a wide range of undisclosed locations by plant gatherers. Thus, there is a risk that plant material may be exposed to a variety of pollutants. The variation in five heavy metals (arsenic, cadmium, cobalt, nickel, and lead) and six essential elements (boron, copper, iron, manganese, molybdenum, and zinc) was determined in commonly used South African medicinal plants obtained from street markets. Elemental content was determined using inductively coupled plasma optical emission spectrophotometry. The reliability of the procedure was ensured by analysing a certified reference material. Medicinal plant samples contained arsenic and cadmium at levels exceeding the World Health Organization limits of 1 and 0.3 mg kg(-1) respectively. Lead and nickel were detected in all samples. Elevated iron and manganese levels were recorded in certain plant species. Multiple metal contamination of parts of medicinal plants gives grounds for concern. This study emphasizes the unsafe consequences of the South African practice of collecting medicinal plants from undisclosed locations and making these readily available to the public.

Ethanol Production from Traditional and Emerging Raw Materials

NASA Astrophysics Data System (ADS)

Rudolf, Andreas; Karhumaa, Kaisa; Hahn-Hägerdal, Bärbel

The ethanol industry of today utilizes raw materials rich in saccharides, such as sugar cane or sugar beets, and raw materials rich in starch, such as corn and wheat. The concern about supply of liquid transportation fuels, which has brought the crude oil price above 100 /barrel during 2006, together with the concern about global warming, have turned the interest towards large-scale ethanol production from lignocellulosic materials, such as agriculture and forestry residues. Baker's yeast Saccharomyces cerevisiae is the preferred fermenting microorganism for ethanol production because of its superior and well-documented industrial performance. Extensive work has been made to genetically improve S. cerevisiae to enable fermentation of lignocellulosic raw materials. Ethanolic fermentation processes are conducted in batch, fed-batch, or continuous mode, with or without cell recycling, the relative merit of which will be discussed.

Naturally Occurring Radioactive Materials (NORM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, P.

1997-02-01

This paper discusses the broad problems presented by Naturally Occuring Radioactive Materials (NORM). Technologically Enhanced naturally occuring radioactive material includes any radionuclides whose physical, chemical, radiological properties or radionuclide concentration have been altered from their natural state. With regard to NORM in particular, radioactive contamination is radioactive material in an undesired location. This is a concern in a range of industries: petroleum; uranium mining; phosphorus and phosphates; fertilizers; fossil fuels; forestry products; water treatment; metal mining and processing; geothermal energy. The author discusses in more detail the problem in the petroleum industry, including the isotopes of concern, the hazards theymore » present, the contamination which they cause, ways to dispose of contaminated materials, and regulatory issues. He points out there are three key programs to reduce legal exposure and problems due to these contaminants: waste minimization; NORM assesment (surveys); NORM compliance (training).« less

Saudi Arabia: Background and U.S. Relations

DTIC Science & Technology

2016-04-22

12 Terrorist Financing and Material Support: Concerns and Responses ..................................... 13 U.S. Foreign Assistance to...Efforts to improve sectarian relations are complicated by anti -Shia violence, official discrimination, and official Saudi concerns about perceived

Chapter 7: Materials for Launch Vehicle Structures

NASA Technical Reports Server (NTRS)

Henson, Grant; Jone, Clyde S. III

2017-01-01

This chapter concerns materials for expendable and reusable launch vehicle (LV) structures. An emphasis is placed on applications and design requirements, and how these requirements are met by the optimum choice of materials. Structural analysis and qualification strategies, which cannot be separated from the materials selection process, are described.

Television for Effective Parenthood; Literature Search and Existing Materials Assessment.

ERIC Educational Resources Information Center

Appalachia Educational Lab., Charleston, WV.

Materials concerning parenthood education were assessed and classified as published research, audiovisual materials, and pamphlets and booklets. Eighty-nine items of related research were reviewed and listed in a bibliography. Content and technical quality of audiovisual materials from a national search were reviewed and evaluated based on…

Topology optimization analysis based on the direct coupling of the boundary element method and the level set method

NASA Astrophysics Data System (ADS)

Vitório, Paulo Cezar; Leonel, Edson Denner

2017-12-01

The structural design must ensure suitable working conditions by attending for safe and economic criteria. However, the optimal solution is not easily available, because these conditions depend on the bodies' dimensions, materials strength and structural system configuration. In this regard, topology optimization aims for achieving the optimal structural geometry, i.e. the shape that leads to the minimum requirement of material, respecting constraints related to the stress state at each material point. The present study applies an evolutionary approach for determining the optimal geometry of 2D structures using the coupling of the boundary element method (BEM) and the level set method (LSM). The proposed algorithm consists of mechanical modelling, topology optimization approach and structural reconstruction. The mechanical model is composed of singular and hyper-singular BEM algebraic equations. The topology optimization is performed through the LSM. Internal and external geometries are evolved by the LS function evaluated at its zero level. The reconstruction process concerns the remeshing. Because the structural boundary moves at each iteration, the body's geometry change and, consequently, a new mesh has to be defined. The proposed algorithm, which is based on the direct coupling of such approaches, introduces internal cavities automatically during the optimization process, according to the intensity of Von Mises stress. The developed optimization model was applied in two benchmarks available in the literature. Good agreement was observed among the results, which demonstrates its efficiency and accuracy.

Temperature changes associated with radiofrequency exposure near authentic metallic implants in the head phantom--a near field simulation study with 900, 1800 and 2450 MHz dipole.

PubMed

Matikka Virtanen, H; Keshvari, J; Lappalainen, R

2010-10-07

Along with increased use of wireless communication devices operating in the radiofrequency (RF) range, concern has been raised about the related possible health risks. Among other concerns, the interaction of medical implants and RF devices has been studied in order to assure the safety of implant carriers under various exposure conditions. In the RF range, the main established quantitative effect of electromagnetic (EM) fields on biological tissues is heating due to vibrational movements of water molecules. The temperature changes induced in tissues also constitute the basis for the setting of RF exposure limits and recommendations. In this study, temperature changes induced by electromagnetic field enhancements near passive metallic implants have been simulated in the head region. Furthermore, the effect of the implant material on the induced temperature change was evaluated using clinically used metals with the highest and the lowest thermal conductivities. In some cases, remarkable increases in maximum temperatures of tissues (as much as 8 °C) were seen in the near field with 1 W power level whereas at lower power levels significant temperature increases were not observed.

Facilitators and barriers to physical activity as perceived by older adults with intellectual disability.

PubMed

van Schijndel-Speet, Marieke; Evenhuis, Heleen M; van Wijck, Ruud; van Empelen, Pepijn; Echteld, Michael A

2014-06-01

Older people with intellectual disability (ID) are characterized by low physical activity (PA) levels. PA is important for reducing health risks and maintaining adequate fitness levels for performing activities of daily living. The aim of this study was to explore preferences of older adults with ID for specific physical activities, and to gain insight into facilitators and barriers to engaging into PA. Fourteen in-depth interviews and four focus groups were undertaken, with a total of 40 older adults with mild and moderate ID included in the analysis. NVivo software was used for analysing the transcribed verbatim interviews. In total, 30 codes for facilitators and barriers were identified. Themes concerning facilitators to PA were enjoyment, support from others, social contact and friendship, reward, familiarity, and routine of activities. Themes concerning barriers to PA were health and physiological factors, lack of self-confidence, lack of skills, lack of support, transportation problems, costs, and lack of appropriate PA options and materials. The results of the present study suggest that older adults with ID may benefit from specific PA programs, adapted to their individual needs and limitations. Results can be used for developing feasible health promotion programs for older adults with ID.

Temperature changes associated with radiofrequency exposure near authentic metallic implants in the head phantom—a near field simulation study with 900, 1800 and 2450 MHz dipole

NASA Astrophysics Data System (ADS)

Matikka (formerly Virtanen, H.; Keshvari, J.; Lappalainen, R.

2010-10-01

Along with increased use of wireless communication devices operating in the radiofrequency (RF) range, concern has been raised about the related possible health risks. Among other concerns, the interaction of medical implants and RF devices has been studied in order to assure the safety of implant carriers under various exposure conditions. In the RF range, the main established quantitative effect of electromagnetic (EM) fields on biological tissues is heating due to vibrational movements of water molecules. The temperature changes induced in tissues also constitute the basis for the setting of RF exposure limits and recommendations. In this study, temperature changes induced by electromagnetic field enhancements near passive metallic implants have been simulated in the head region. Furthermore, the effect of the implant material on the induced temperature change was evaluated using clinically used metals with the highest and the lowest thermal conductivities. In some cases, remarkable increases in maximum temperatures of tissues (as much as 8 °C) were seen in the near field with 1 W power level whereas at lower power levels significant temperature increases were not observed.

Contemporary girlhood: maternal reports on sexualized behaviour and appearance concern in 4-10 year-old girls.

PubMed

Tiggemann, Marika; Slater, Amy

2014-09-01

It is widely accepted that the sexualization of girls has increased markedly over time. The overall aim of the present study was to offer a description of the behaviours of young girls, with a particular focus on potentially sexualized behaviours and appearance concern. A sample of 815 mothers of 4-10 year-old girls completed a questionnaire about a range of behaviours exhibited by their daughters, in addition to measures of their own self-objectification and material concern. It was found that many girls engaged with teen culture and used a variety of beauty products, but few exhibited more overtly sexualized behaviours. Involvement with teen culture, using beauty products, attention to clothes, and personal grooming were all associated with the measure of appearance concern, as were maternal self-objectification and material concern. It was concluded that young girls do engage in 'grown up' behaviours and that such engagement is not benign for their development. Copyright © 2014 Elsevier Ltd. All rights reserved.

Caustic Precipitation of Plutonium Using Gadolinium as the Neutron Poison for Disposition to High Level Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bronikowski, M.G.

2002-06-24

Nuclear Materials Management Division (NMMD) has proposed that up to 100 kg of the plutonium (Pu) solutions stored in H-Canyon be precipitated with a nuclear poison and dispositioned to H-Area Tank Farm. The use of gadolinium (Gd) as the poison would greatly reduce the number of additional glass logs resulting from this disposition. This report summarizes the characteristics of the precipitation process and addresses criticality concerns in the Nuclear Criticality Safety Evaluation. No problems were found with the nature of the precipitate or the neutralization process.

General analysis of group velocity effects in collinear optical parametric amplifiers and generators.

PubMed

Arisholm, Gunnar

2007-05-14

Group velocity mismatch (GVM) is a major concern in the design of optical parametric amplifiers (OPAs) and generators (OPGs) for pulses shorter than a few picoseconds. By simplifying the coupled propagation equations and exploiting their scaling properties, the number of free parameters for a collinear OPA is reduced to a level where the parameter space can be studied systematically by simulations. The resulting set of figures show the combinations of material parameters and pulse lengths for which high performance can be achieved, and they can serve as a basis for a design.

Eating Concerns in College Women across Sexual Orientation Identities

ERIC Educational Resources Information Center

Maloch, Janelle K.; Bieschke, Kathleen J.; McAleavey, Andrew A.; Locke, Benjamin D.

2013-01-01

This study found that treatment-seeking sexual minority college women evidenced serious eating concerns. Regardless of sexual orientation and compared with those with low levels of eating concerns, women with high levels of eating concerns evidenced increased depression, increased generalized anxiety, and a greater likelihood of experiencing…

Repellency of selected chemicals against the bed bug (Hemiptera: Cimicidae).

PubMed

Wang, Changlu; Lü, Lihua; Zhang, Aijun; Liu, Chaofeng

2013-12-01

In recent years, the common bed bug, Cimex lectularius L. (Hemiptera: Cimicidae), became a major public health concern in urban communities. Bed bugs are notoriously difficult to control, and their bites are not tolerated by most people. The public has an urgent need for materials and methods to reduce bed bug introduction and bites during work, travel, or sleep. A repellent product will help achieve these goals by discouraging and preventing bed bugs from moving to a protected area. We evaluated the repellency of three commercially available insect repellent or control materials and five nonregistered materials with the goal of identifying safe and effective bed bug repellents. The two commercial repellent products that contained 7% picaridin or 0.5% permethrin had little repellency against bed bugs. N,N-diethyl-m-toluamide (DEET), the most commonly used insect repellent, provided a high level of repellency against bed bugs. When a host cue (carbon dioxide) was present, the minimum DEET concentration to repel > or = 94% of the bed bugs for a9-h period was 10%. The longevity of repellency of DEET was concentration dependent. At 25% concentration, DEET-treated fabric surface remained highly repellent to bed bugs for a 14-d period. However, DEET has a strong smell and dissolves certain plastic materials. Therefore, we evaluated several odorless, noncorrosive, and potentially effective repellents. Isolongifolenone and isolongifolanone, two natural products and recently reported insect repellents, exhibited strong repellent property against bed bugs but at significantly lower levels than DEET. Three novel potential repellent compounds discovered by Bedoukian Research Inc. (Danbury, CT) exhibited similar level of repellency and longevity as DEET for repelling bed bugs. These nonirritant and odorless compounds are promising candidates as alternatives to DEET for reducing the spread of bed bugs and bed bug bites.

Interdisciplinary research on the nature and properties of ceramic materials

NASA Technical Reports Server (NTRS)

1980-01-01

Several investigations concerning the properties and processing of brittle ceramic materials as related to design considerations are briefly described. Surface characterization techniques, fractography, high purity materials, creep properties, impact and thermal shock resistance, and reaction bonding are discussed.

Study of materials for space processing. [with emphasis on crystal growth

NASA Technical Reports Server (NTRS)

Lal, R. B.

1974-01-01

A handbook is presented of materials feasible for growth in space in future NASA Missions. Major emphasis was placed on a literature survey concerned with promising materials. Equipment for resistivity and hall effect set-up was procured.

Patenting human genetic material: refocusing the debate

PubMed Central

Caulfield, Timothy; Gold, E. Richard; Cho, Mildred K.

2008-01-01

The biotechnology industry has become firmly established over the past twenty years and gene patents have played an important part in this phenomenon. However, concerns have been raised over the patentability of human genetic material, through public protests and international statements, but to little effect. Here we discuss some of these concerns, the patent authorities’ response to them, and ways in which to address these issues and to move the debate forward using current legal structures. PMID:11252752

[What did bachelard mean by "applied rationalism" ?].

PubMed

Tiles, Mary

2013-01-01

Bachelard was concerned with the processes whereby scientific knowledge is acquired, including the activity of knowing subjects. He did not equate reasoning with logic but rather argued that reasoning resulted from the use of mathematics in organizing both thought and experimental practices, which is why he conceived science as applied mathematics. This had material and technical implications, for Bachelard was concerned with the element of reason inherent in technical materialism as well as the concrete reality inherent in applied rationalism.

Evaluation of quality of routine physical examination in urban public basic schools in Khartoum State, Sudan.

PubMed

Alfadeel, Mona A; Hamid, Yassin H M; El Fadeel, Ogail Ata; Salih, Karimeldin M A

2015-01-01

The objectives of this study are to identify the availability of the service logistics in basic public schools (structure as quality concept), to assess steps of physical examination according to the ministry of health guidelines (process as quality concept) and to measure satisfaction of service consumers (pupils) and service providers (teacher and doctors). The study involved seven localities in Sudan using questionnaires and observations. The structure in form of material and human resources was not well maintained, equally the process and procedure of medical examination did not well fit with rules of quality, however, the satisfaction level was within the accepted level. As far as structure, process and outcome were concerned, we are still below the standards in developed countries for many reasons but the level of satisfaction in the present study is more or less similar as in else studies.

Evaluation of the Influence of Wind-Driven Rain on Moisture in Cellular Concrete Wall Boards

NASA Astrophysics Data System (ADS)

Alsabry, A.; Nikitsin, V. I.; Kofanov, V. A.; Backiel-Brzozowska, B.

2017-08-01

The non-stationary moisture level of a cellular concrete wall board in a heated utility building located in the northern part of the town of Brest (Belarus), depending on the climatic influence, was assessed in this work. The results were obtained both in a calculation experiment and a physical test. It was observed that the main reason for the high moisture levels in cellular concrete is wind-driven rain intensifying the process of free capillary moisture transfer. A comparative analysis of the results of the physical test and the calculation experiment showed that the THSS software elaborated by the authors was able to predict the actual moisture levels of the shielding structure under study accurately enough when precise data concerning the thermal and physical characteristics of the materials as well as the occurring climatic influences were submitted.

Concern about the Expanding Prescription Drug Epidemic: A Survey of Licensed Prescribers and Dispensers.

PubMed

Wright, R Eric; Reed, Nia; Carnes, Neal; Kooreman, Harold E

2016-01-01

Prescription drug misuse and abuse has reached epidemic levels in the U.S., and stands as a leading cause of death. As the primary gatekeepers to the medications contributing to this epidemic, it is critical to understand the views of licensed health care professionals. In this study, we examine health care professionals' concern regarding prescription drug abuse in their communities and the impact their concern has had on their prescribing and dispensing practices. An online survey of licensed health care providers. Conducted in Indiana. This study was a state-wide evaluation of Indiana's prescription drug monitoring program. The questionnaire asked respondents how concerned they were about prescription drug abuse in their community. Variation in the level of concern was examined using ordinary least squares regression and information about the respondents' demographic background and clinical experience. In addition, we used logistic regression to examine whether concern was associated with changing prescribing and/or dispensing behavior. The majority of providers indicated they were "moderately" or "extremely concerned" about prescription drug abuse in their communities. The level of concern, however, varied significantly by profession, with pharmacists, physicians, nurse practitioners/physician assistants being more concerned than dentists. Additional analyses indicate that providers with higher levels of concern were those who also reported recently changing their prescribing and/or dispensing behavior. The voluntary nature and geographical focus of the study limits the generalizability of the findings. Concern about prescription drug abuse is generally high across the major health care professions; however, a significant minority of providers, particularly among dentists, expressed little or no concern about the epidemic. Increasing health care providers' general level of concern about prescription drug abuse may be an effective public health tool for encouraging voluntary reductions in prescribing and/or dispensing controlled substances.

Influence of Fines Content on Consolidation and Compressibility Characteristics of Granular Materials

NASA Astrophysics Data System (ADS)

Lipiński, Mirosław J.; Wdowska, Małgorzata K.; Jaroń, Łukasz

2017-10-01

Various behaviour of soil under loading results to large extent from kind of soil considered. There is a lot of literature concerning pure sand or plastic clays, while little is known about materials, which are from classification point of view, between those soils. These materials can be considered as cohesionless soils with various fines content. The paper present results of tests carried out in large consolidometer on three kinds of soil, containing 10, 36 and 97% of fines content. Consolidation, permeability and compressibility characteristics were determined. Analysis of the test results allowed to formulate conclusion concerning change in soil behaviour resulting from fines content.

Overview of Chemicals of Emerging Concern

EPA Science Inventory

Contaminants of emerging concern or environmental emerging contaminants, are chemicals, products and materials that are detected with increasing frequency in all environmental media including surface, ground water and drinking water. Examples of these contaminants include pharmac...

Spatial distribution and health risk assessment of toxic metals associated with receptor population density in street dust: a case study of Xiandao District, Changsha, Middle China.

PubMed

Li, Fei; Huang, Jinhui; Zeng, Guangming; Huang, Xiaolong; Liu, Wenchu; Wu, Haipeng; Yuan, Yujie; He, Xiaoxiao; Lai, Mingyong

2015-05-01

Spatial characteristics of the properties (dust organic material and pH), concentrations, and enrichment levels of toxic metals (Ni, Hg, Mn and As) in street dust from Xiandao District (Middle China) were investigated. Method of incorporating receptor population density into noncarcinogenic health risk assessment based on local land use map and geostatistics was developed to identify their priority pollutants/regions of concern. Mean enrichment factors of studied metals decreased in the order of Hg ≈ As > Mn > Ni. For noncarcinogenic effects, the exposure pathway which resulted in the highest levels of exposure risk for children and adults was ingestion except Hg (inhalation of vapors), followed by dermal contact and inhalation. Hazard indexes (HIs) for As, Hg, Mn, and Ni to children and adults revealed the following order: As > Hg > Mn > Ni. Mean HI for As exceeded safe level (1) for children, and the maximum HI (0.99) for Hg was most approached the safe level. Priority regions of concern were indentified in A region at each residential population density and the areas of B at high and moderate residential population density for As and the high residential density area within A region for Hg, respectively. The developed method was proved useful due to its improvement on previous study for making the priority areas of environmental management spatially hierarchical and thus reducing the probability of excessive environmental management.

Study Materials for Economic Education in the Schools. Reports of Materials Evaluation Committees to the Joint Council on Economic Education.

ERIC Educational Resources Information Center

Joint Council on Economic Education, New York, NY.

The Materials Evaluation Committee of the Joint Council reviewed both print and non-print supplementary student materials for economics in order to make this selected list of those materials thought to be suitable according to: 1) whether the materials are genuinely concerned with economic matters; 2) whether they are analytical in nature; and, 3)…

A comparative study of zirconium and titanium implants in rat: osseointegration and bone material quality.

PubMed

Hoerth, Rebecca M; Katunar, María R; Gomez Sanchez, Andrea; Orellano, Juan C; Ceré, Silvia M; Wagermaier, Wolfgang; Ballarre, Josefina

2014-02-01

Permanent metal implants are widely used in human medical treatments and orthopedics, for example as hip joint replacements. They are commonly made of titanium alloys and beyond the optimization of this established material, it is also essential to explore alternative implant materials in view of improved osseointegration. The aim of our study was to characterize the implant performance of zirconium in comparison to titanium implants. Zirconium implants have been characterized in a previous study concerning material properties and surface characteristics in vitro, such as oxide layer thickness and surface roughness. In the present study, we compare bone material quality around zirconium and titanium implants in terms of osseointegration and therefore characterized bone material properties in a rat model using a multi-method approach. We used light and electron microscopy, micro Raman spectroscopy, micro X-ray fluorescence and X-ray scattering techniques to investigate the osseointegration in terms of compositional and structural properties of the newly formed bone. Regarding the mineralization level, the mineral composition, and the alignment and order of the mineral particles, our results show that the maturity of the newly formed bone after 8 weeks of implantation is already very high. In conclusion, the bone material quality obtained for zirconium implants is at least as good as for titanium. It seems that the zirconium implants can be a good candidate for using as permanent metal prosthesis for orthopedic treatments.

Elaborated Odor Test for Extended Exposure

NASA Technical Reports Server (NTRS)

Buchanan, Vanessa D.; Henry, Emily J.; Mast, Dion J.; Harper, Susana A.; Beeson, Harold D.; Tapia, Alma S.

2016-01-01

Concerns were raised when incidental exposure to a proprietary bonding material revealed the material had an irritating odor. The NASA-STD-6001B document describes a supplemental test method option for programs to evaluate materials with odor concerns (Test 6, Odor Assessment). In addition to the supplemental standard odor assessment with less than 10 seconds of exposure, the NASA White Sands Test Facility (WSTF) Materials Flight Acceptance Testing section was requested to perform an odor test with an extended duration to evaluate effects of an extended exposure and to more closely simulate realistic exposure scenarios. With approval from the NASA Johnson Space Center Industrial Hygienist, WSTF developed a 15-minute odor test method. WSTF performed this extended-duration odor test to evaluate the odor and physical effects of the bonding material configured between two aluminum plates, after the safety of the gas was verified via toxicity analysis per NASA-STD-6001B Test 7, Determination of Offgassed Products. During extended-duration testing, odor panel members were arranged near the test material in a small room with the air handlers and doors closed to minimize dilution. The odor panel members wafted gas toward themselves and recorded their individual assessments of odor and physical effects at various intervals during the 15-minute exposure and posttest. A posttest interview was conducted to obtain further information. Testing was effective in providing data for comparison and selection of an optimal offgassing and odor containment configuration. The developed test method for extended exposure is proposed as a useful tool for further evaluating materials with identified odors of concern if continued use of the material is anticipated.

Teaching Acoustic Properties of Materials in Secondary School: Testing Sound Insulators

ERIC Educational Resources Information Center

Hernandez, M. I.; Couso, D.; Pinto, R.

2011-01-01

Teaching the acoustic properties of materials is a good way to teach physics concepts, extending them into the technological arena related to materials science. This article describes an innovative approach for teaching sound and acoustics in combination with sound insulating materials in secondary school (15-16-year-old students). Concerning the…

Industrialization study, phase 2. [assessment of advanced photovoltaic technologies for commerical development

NASA Technical Reports Server (NTRS)

1979-01-01

The potentials and requirements of advanced photovoltaic technologies still in their early developmental stages were evaluated and compared to the present day single crystal silicon wafer technology and to each other. The major areas of consideration include polycrystalline and amorphous silicon, single crystal and polycrystalline gallium arsenide, and single crystal and polycrystalline cadmium sulfide. A rank ordering of the advanced technologies is provided. The various ranking schemes were based upon present-day efficiency levels, their stability and long-term reliability prospects, material availability, capital investments both at the laboratory and production level, and associated variable costs. An estimate of the timing of the possible readiness of these advanced technologies for technology development programs and industrialization is presented along with a set of recommended government actions concerning the various advanced technologies.

Evaluation of awareness and preparedness of school Principals and teachers on earthquake reduction effects issues - State's actions

NASA Astrophysics Data System (ADS)

Kourou, Assimina; Ioakeimidou, Anastasia; Mokos, Vasileios; Bakas, Konstantinos

2013-04-01

It is generally accepted that the effects of the disasters can be mainly reduced if people are aware, well informed and motivated towards a culture of disaster prevention and resilience. Particularly, in earthquake prone countries, a continuous update and education of the public, on earthquake risk management issues, is essential. Schools can play a crucial role concerning training and building a disaster prevention culture, among various community groups. Principals and teachers have a key role to play in any school-wide initiative through developing and reviewing awareness policy, developing and revising emergency response plans, holding emergency drills and training the students. During the last decade, the Greek State have done a lot of efforts in order to better educate teachers and students in disaster preparedness and management, such as: a. implementation of the E.P.P.O.'s educational project "Earthquake Protection at Schools" which is addressed mainly to school Principals. The project started right after the 1999 earthquake in Athens. b. publication of educational material for students, teachers and people with disabilities and publication of guidelines concerning the development of emergency plans. c. implementation of projects and elaboration of innovative and mobile experiential educational material connected with school curricula. The aim of the present study is to assess levels of awareness and preparedness concerning earthquake protection issues, as well as risk mitigation behaviours, undertaken by teachers at individual, family and workplace level. Furthermore, the assessment of teachers' current levels of earthquake awareness and preparedness, could lead to conclusions about the effectiveness of State's current Policy. In this framework, specific questionnaires were developed and were addressed to Principals and teachers who were responsible for the preparation of their School Emergency Preparedness Plans. The sample of the survey comprises of primary and secondary schools of 9 different prefectures of Greece. Approximately 1.100 responses have been gathered. The analysis of the results indicated that approximately 60% of the surveyed teachers have experienced at least one earthquake at school, which is expected due to Greece's high seismicity (50% of the released seismic energy in Europe). Additionally, the level of knowledge of surveyed teachers on earthquake protection measures is very high. A significant majority of the teachers, were reported being familiar with the identification and reduction of non structural hazards at their home, and the development of School's Emergency Plans. On the other hand, approximately the 25% of the responders were not aware of their school emergency plan or they claimed that such a plan does not exist at their schools. These teachers have not participated in any earthquake school drill. Thus, even though a lot of State's initiatives have been implemented till now to build awareness towards earthquakes and establish a preparedness status for prospective earthquakes in school community, there are still proposed actions to be taken in order to improve the teachers' ability to plan or implement activities concerning earthquake management issues.

[Unipacs: A-LM German, Units 3-29].

ERIC Educational Resources Information Center

West Bend High Schools, WI.

These instructional materials, designed for use with the "A-LM" German language course, permit teachers to individualize instruction. Basic objectives are outlined concerning basic dialogues, vocabulary, supplementary materials, reading, grammar, recombination materials, and creative conversation. A student checklist serves as a guide for the…

Caregivers' concerns about judgment and safety of patients with brain injury: a preliminary investigation.

PubMed

Kreutzer, Jeffrey S; Livingston, Lee A; Everley, Rachel S; Gary, Kelli W; Arango-Lasprilla, Juan Carlos; Powell, Victoria D; Marwitz, Jennifer H

2009-08-01

To identify caregivers' most common concerns about the judgment and safety of patients with brain injury in home and community environments. To quantify caregivers' stress levels and their level of comfort leaving patients at home unsupervised and examine the interrelationships between caregivers' safety and judgment ratings, stress levels, and levels of comfort leaving patients unattended. Retrospective, cross-sectional design. Outpatient brain injury neuropsychology clinic at a university medical center. A convenience sample of 121 caregivers of traumatic brain injury survivors at least 1 month postinjury and 18 years of age or older. Scores in 9 domains from the Judgment and Safety Screening Inventory; ratings of stress levels and levels of comfort leaving patients at home unattended derived from the General Health and History Questionnaire. Caregivers' most common judgment and safety-related concerns were in the Travel and Financial domains, with many reflecting patients' memory deficits. Heightened caregiver stress levels were prevalent. Higher levels of concern about judgment and safety were associated with higher stress levels and concerns about leaving patients unattended. Consistent with research on patients with other types of neurological disorders, concerns about driving and financial management among caregivers are prevalent. Additional research is needed to identify the most cost-effective methods of evaluating patients and enabling them to function at their highest level in the community.

The Socioemotional Costs and Benefits of Social-Evaluative Concerns: Do Girls Care Too Much?

PubMed Central

Rudolph, Karen D.; Conley, Colleen S.

2011-01-01

This research investigated the hypothesis that girls’ heightened concerns about social evaluation contribute to sex differences in depression and interpersonal competence during early adolescence. A short-term longitudinal study was conducted with 474 adolescents to examine the consequences of heightened social-evaluative concerns. Adolescents reported on their levels of social-evaluative concerns and depressive symptoms. Teachers provided ratings of adolescents’ competence with peers (displays of prosocial and aggressive behavior). As anticipated, girls demonstrated higher levels of social-evaluative concerns, depressive symptoms, and interpersonal competence than did boys. Moreover, path analysis confirmed that heightened social-evaluative concerns were associated both concurrently and over time with higher levels of depression, as well as with higher levels of interpersonal competence. Notably, social-evaluative concerns accounted fully for the sex difference in depression and partially for the sex difference in interpersonal competence. These findings highlight the need to consider both the socioemotional costs and benefits of sex-linked relational orientations. PMID:15660675

“Additive Manufacturing: Building the Pathway Towards Process and Material Qualification”

DOE PAGES

Carpenter, John S.; Beese, Allison M.; Bourell, David L.; ...

2016-06-14

The potential benefits of metal additive manufacturing, as compared with more traditional, subtractive-only approaches, has created excitement within design circles seeking to take advantage of the ability to build and repair complex shapes, to integrate or consolidate multiple parts and minimize joining concerns, and to locally tailor material properties to increase functionality. Tempering the excitement of designers, however, has been concerns with the material deposited by the process. It is not enough for a part to ‘look’ right from a geometric perspective. Rather, the metallurgical aspects associated with the material being deposited must ‘look’ and ‘behave’ correctly along with themore » aforementioned geometric accuracy. Finally, without elucidation of the connections between processing, microstructure, properties, and performance from a materials science perspective, metal additive manufacturing will not realize its potential to change the manufacturing world for property and performance-critical engineering applications.« less

Environmental health and hazardous waste issues related to the U.S.-Mexico border.

PubMed Central

Carter, D E; Peña, C; Varady, R; Suk, W A

1996-01-01

Environmental health and environmental quality issues along the U.S.-Mexico border have been of concern for several years. The enactment of the North American Free Trade Agreement and the presence of the maquiladoras (foreign-owned industries using imported raw materials) have intensified those concerns recently. Efforts to assess these issues are complicated by the fact that many of the issues affecting the border region are within federal jurisdiction, but the problems are regional and local in nature. Thus, state and local governments become involved with public concerns about real and potential problems. One major problem is that environmental health data from this region are lacking, particularly from Mexico. Some new agencies such as the Border Environment Cooperation Commission, the United States-Mexico Border Health Commission, and the North American Commission on Environmental Cooperation have joined several existing agencies at the federal and state level to address environmental quality and health. Several studies have been initiated to determine air and water quality, but little is being done in the areas of hazardous waste and health assessment. Several problems are anticipated in the generation of such data, such as its format and accessibility. Data gaps and research needs are discussed. PMID:8793340

Effect of fireworks on ambient air quality in Malta

NASA Astrophysics Data System (ADS)

Camilleri, Renato; Vella, Alfred J.

2010-11-01

Religious festivals ( festas) in the densely populated Maltese archipelago (Central Mediterranean) are ubiquitous during summer when 86 of them are celebrated between June and October, each involving the burning of fireworks both in ground and aerial displays over a period of 3 days or longer per festival. We assessed the effect of fireworks on the air quality by comparing PM 10 and its content of Al, Ba, Cu, Sr and Sb which materials are used in pyrotechnic compositions. PM 10 was collected mainly from two sites, one in Malta (an urban background site) and the other in Gozo (a rural site) during July-August 2005 when 59 feasts were celebrated and September-October 2005 when only 11 feasts occurred. For both Malta and Gozo, PM 10 and metal concentration levels measured as weekly means were significantly higher during July-August compared to September-October and there exist strong correlations between PM 10 and total metal content. Additionally, for Malta dust, Al, Ba, Cu and Sr correlated strongly with each other and also with total concentration of all five metals. The same parameters measured in April 2006 in Malta were at levels similar to those found in the previous October. Ba and Sb in dust from the urban background site in Malta during July-August were at comparable or higher concentration than recently reported values in PM 10 from a heavily-trafficked London road and this suggests that these metals are locally not dominated by sources from roadside materials such as break liner wear but more likely by particulate waste from fireworks. Our findings point to the fact that festa firework displays contribute significantly and for a prolonged period every year to airborne dust in Malta where PM 10 is an intractable air quality concern. The presence in this dust of elevated levels of Ba and especially Sb, a possible carcinogen, is of concern to health.

Home literacy environment of pre-school children with intellectual disabilities.

PubMed

van der Schuit, M; Peeters, M; Segers, E; van Balkom, H; Verhoeven, L

2009-12-01

For pre-school children, the home literacy environment (HLE) plays an important role in the development of language and literacy skills. As there is little known about the HLE of children with intellectual disabilities (ID), the aim of the present study was to investigate the HLE of children with ID in comparison with children without disabilities. Parent questionnaires concerning aspects of the HLE were used to investigate differences between 48 children with ID, 107 children without disabilities of the same chronological age and 36 children without disabilities of the same mental age (MA). Furthermore, for the children with ID, correlations were computed between aspects of the HLE and children's non-verbal intelligence, speech intelligibility, language and early literacy skills. From the results of the multivariate analyses of variance it could be concluded that the HLE of children with ID differed from that of children in the chronological age group on almost all aspects. When compared with children in the MA group, differences in the HLE remained. However, differences mainly concerned child-initiated activities and not parent-initiated activities. Correlation analyses showed that children's activities with literacy materials were positively related with MA, productive syntax and vocabulary age, and book orientation skills. Also, children's involvement during storybook reading was related with their MA, receptive language age, productive syntax and vocabulary age, book orientation and rapid naming of pictures. The amount of literacy materials parents provided was related to a higher productive syntax age and level of book orientation of the children. Parent play activities were also positively related to children's speech intelligibility. The cognitive disabilities of the children were the main cause of the differences found in the HLE between children with ID and children without disabilities. Parents also adapt their level to the developmental level of their child, which may not always be the most stimulating for the children.

THE FUKUSHIMA RADIOLOGICAL EMERGENCY AND CHALLENGES IDENTIFIED FOR FUTURE PUBLIC HEALTH RESPONSES

PubMed Central

Miller, Charles W.

2015-01-01

On 11 March 2011, northern Japan was rocked by first a magnitude 9.0 earthquake off the eastern coast and then an ensuing tsunami. The Fukushima Daiichi Nuclear Power Plant complex was hit by these twin disasters, and a cascade of events was initiated that led to radionuclide releases causing widespread radioactive contamination of residential areas, agricultural land, and coastal waters. Radioactive material from Japan was subsequently transmitted to locations around the globe, including the U.S. The levels of radioactive material that arrived in the U.S. were never large enough to be a concern for health effects, but the presence of this material in the environment was enough to create a public health emergency in the U.S. The radiation safety and public health communities in the U.S. are identifying challenges they faced in responding to this incident. This paper discusses three of those challenges: (1) The growing shortage of trained radiation subject matter experts in the field of environmental transport and dosimetry of radionuclides; (2) the need to begin expressing all radiation-related quantities in terms of the International System of Units; and (3) the need to define when a radiation dose is or is not one of “public health concern.” This list represents only a small subset of the list of challenges being identified by public health agencies that responded to the Fukushima incident. However, these three challenges are fundamental to any radiological emergency response. Addressing them will have a significant positive impact on how the U.S. responds to the next radiological emergency. PMID:22469934

The Fukushima radiological emergency and challenges identified for future public health responses.

PubMed

Miller, Charles W

2012-05-01

On 11 March 2011, northern Japan was rocked by first a magnitude 9.0 earthquake off the eastern coast and then an ensuing tsunami. The Fukushima Daiichi Nuclear Power Plant complex was hit by these twin disasters, and a cascade of events was initiated that led to radionuclide releases causing widespread radioactive contamination of residential areas, agricultural land, and coastal waters. Radioactive material from Japan was subsequently transmitted to locations around the globe, including the U.S. The levels of radioactive material that arrived in the U.S. were never large enough to be a concern for health effects, but the presence of this material in the environment was enough to create a public health emergency in the U.S. The radiation safety and public health communities in the U.S. are identifying challenges they faced in responding to this incident. This paper discusses three of those challenges: (1) The growing shortage of trained radiation subject matter experts in the field of environmental transport and dosimetry of radionuclides; (2) the need to begin expressing all radiation-related quantities in terms of the International System of Units; and (3) the need to define when a radiation dose is or is not one of "public health concern." This list represents only a small subset of the list of challenges being identified by public health agencies that responded to the Fukushima incident. However, these three challenges are fundamental to any radiological emergency response. Addressing them will have a significant positive impact on how the U.S. responds to the next radiological emergency.

Anaerobic digestion of thin stillage for energy recovery and water reuse in corn-ethanol plants.

PubMed

Alkan-Ozkaynak, A; Karthikeyan, K G

2011-11-01

Recycling of anaerobically-digested thin stillage within a corn-ethanol plant may result in the accumulation of nutrients of environmental concern in animal feed coproducts and inhibitory organic materials in the fermentation tank. Our focus is on anaerobic digestion of treated (centrifugation and lime addition) thin stillage. Suitability of digestate from anaerobic treatment for reuse as process water was also investigated. Experiments conducted at various inoculum-to-substrate ratios (ISRs) revealed that alkalinity is a critical parameter limiting digestibility of thin stillage. An ISR level of 2 appeared optimal based on high biogas production level (763 mL biogas/g volatile solids added) and organic matter removal (80.6% COD removal). The digester supernatant at this ISR level was found to contain both organic and inorganic constituents at levels that would cause no inhibition to ethanol fermentation. Anaerobic digestion of treated-thin stillage can be expected to improve the water and energy efficiencies of dry grind corn-ethanol plants. Copyright © 2011 Elsevier Ltd. All rights reserved.

47 CFR 74.631 - Permissible service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... transmission of program material, orders concerning such program material, and related communications necessary... 6875-7125 MHz may be used by broadcast network-entities only for television pick-up stations. [28 FR...

47 CFR 74.631 - Permissible service.

Code of Federal Regulations, 2011 CFR

2011-10-01

... transmission of program material, orders concerning such program material, and related communications necessary... 6875-7125 MHz may be used by broadcast network-entities only for television pick-up stations. [28 FR...

Annotated Bibliography of Materials for Elementary Foreign Language Programs.

ERIC Educational Resources Information Center

Dobb, Fred

An annotated bibliography contains about 70 citations of instructional materials and materials concerning curriculum development for elementary school foreign language programs. Citations are included for Arabic, classical languages, French, German, Hebrew, Italian, Japanese, and Spanish. Items on exploratory language courses and general works on…

Resource Materials Available in Spanish Concerning Exceptional Children.

ERIC Educational Resources Information Center

Schultz, Rosario A., Comp.

The document presents, in table form, information on over 100 resource materials written in Spanish on exceptional children. Materials are divided into eight sections: autism; general handicapping conditions (arthritis, asthma, brain damage, cancer, cerebral palsy, cleft lip/cleft palate, developmental disabilities, epilepsy, general, heart,…

Multicultural Materials; A Selective Bibliography.

ERIC Educational Resources Information Center

Nichols, Margaret S.; O'Neill, Peggy

Adult materials concerning human relations and the history, culture, and current social issues of Black, Chicano, Asian American, and Native American peoples are listed in this revised and expanded edition of the "Bibliography of Multicultural Materials." For each cultural group, entries are categorized under history and current social…

Assessment of the occupational exposure at a fertiliser industry in the northern part of Greece.

PubMed

Potiriadis, C; Koukouliou, V; Seferlis, S; Kehagia, K

2011-03-01

In the northern part of Greece, close to the city of Kavala, a phosphoric acid production industry has operated since 1965. The raw material used is the phosphate rock imported from the foreign countries. During industrial processes, naturally occurring radioactive materials (NORM) deposits exist in many facilities in the industry, causing increased levels of radiation exposure. Additionally, increased levels of NORM concentrations are also detected in the waste material of the production process, the phosphogypsum. According to the Greek Regulations for Radiation Protection (no. 216B, 5/3/2001), which is in accordance with the 96/29/EURATOM 31/5/1996, the action levels concerning the effective dose to workers at workplaces due to natural radiation sources are 1 mSv y(-1). Work activities where the corresponding doses exceed 6 mSv y(-1) are under the control of the Greek Atomic Energy Commission (GAEC). The mean yearly radon concentration action level at workplaces is 400 Bq m(-3), while the corresponding concentration limit is 3000 Bq m(-3), respectively. GAEC, according to its constitutional law, is the responsible organisation to enforce and to implement the law by means of in situ surveys and laboratory measurements. The first inspection of the area was performed in 2002 and the first measures were proposed. Periodic inspections were performed every 2 y in order to extend the operation licensing of the industry. In this work a dose assessment of the workers based on in situ and laboratory measurements is presented. In order to assess the doses to the workers the external and the internal doses are estimated.

Physico-chemical characterisation of material fractions in residual and source-segregated household waste in Denmark.

PubMed

Götze, R; Pivnenko, K; Boldrin, A; Scheutz, C; Astrup, T Fruergaard

2016-08-01

Physico-chemical waste composition data are paramount for the assessment and planning of waste management systems. However, the applicability of data is limited by the regional, temporal and technical scope of waste characterisation studies. As Danish and European legislation aims for higher recycling rates evaluation of source-segregation and recycling chains gain importance. This paper provides a consistent up-to-date dataset for 74 physico-chemical parameters in 49 material fractions from residual and 24 material fractions from source-segregated Danish household waste. Significant differences in the physico-chemical properties of residual and source-segregated waste fractions were found for many parameters related to organic matter, but also for elements of environmental concern. Considerable differences in potentially toxic metal concentrations between the individual recyclable fractions within one material type were observed. This indicates that careful planning and performance evaluation of recycling schemes are important to ensure a high quality of collected recyclables. Rare earth elements (REE) were quantified in all waste fractions analysed, with the highest concentrations of REE found in fractions with high content of mineral raw materials, soil materials and dust. The observed REE concentrations represent the background concentration level in non-hazardous waste materials that may serve as a reference point for future investigations related to hazardous waste management. The detailed dataset provided here can be used for assessments of waste management solutions in Denmark and for the evaluation of the quality of recyclable materials in waste. Copyright © 2016 Elsevier Ltd. All rights reserved.

Replacing critical rare earth materials in high energy density magnets

NASA Astrophysics Data System (ADS)

McCallum, R. William

2012-02-01

High energy density permanent magnets are crucial to the design of internal permanent magnet motors (IPM) for hybride and electric vehicles and direct drive wind generators. Current motor designs use rare earth permanent magnets which easily meet the performance goals, however, the rising concerns over cost and foreign control of the current supply of rare earth resources has motivated a search for non-rare earth based permanent magnets alloys with performance metrics which allow the design of permanent magnet motors and generators without rare earth magnets. This talk will discuss the state of non-rare-earth permanent magnets and efforts to both improve the current materials and find new materials. These efforts combine first principles calculations and meso-scale magnetic modeling with advance characterization and synthesis techniques in order to advance the state of the art in non rare earth permanent magnets. The use of genetic algorithms in first principle structural calculations, combinatorial synthesis in the experimental search for materials, atom probe microscopy to characterize grain boundaries on the atomic level, and other state of the art techniques will be discussed. In addition the possibility of replacing critical rare earth elements with the most abundant rare earth Ce will be discussed.

Reference materials for the monitoring of the aquatic environment--a review with special emphasis on organic priority pollutants.

PubMed

Bercaru, Ofelia; Gawlik, Bernd Manfred; Ulberth, Franz; Vandecasteele, Carlo

2003-08-01

During recent years, the awareness of quality assurance and quality control in environmental analyses has constantly increased, especially due to the implementation of new guidelines and regulations at both the national and international level. Achieving comparable results by using certified reference materials is one of the primary concerns of the scientific community. As a result, there is a growing demand for certified reference materials to cover different matrices and pollutants. Moreover, these CRMs should be in close relationship to the determinants and target concentrations required by environmental bodies and European Directives as well. Supplementary information to this paper presents an inventory of reference materials available on the market from different suppliers against the priority pollutants listed in the Water Framework Directive. These CRMs cover matrices such as water, sediment and biota. The use of CRMs in relationship to appropriate analytical methods and relevant determinants is discussed and the need for matrix-CRMs, particularly for organic pollutants is emphasised. The use of proficiency testing schemes as an alternative for the lack of appropriate CRMs and future trends in the production of CRMs within the BCR framework are also discussed.

Structural Analysis of MoS2 and other 2D layered materials using LEEM/LEED-I(V) and STM

NASA Astrophysics Data System (ADS)

Grady, Maxwell; Dai, Zhongwei; Jin, Wencan; Dadap, Jerry; Osgood, Richard; Sadowski, Jerzy; Pohl, Karsten

Layered two-dimensional materials, such as molybdenum disulfide, MoS2, are of interest for the development of many types of novel electronic devices. To fully understand the interfaces between these new materials, the atomic reconstructions at their surfaces must be understood. Low Energy Electron Microscopy and Diffraction, LEEM/ μLEED, present a unique method for rapid material characterization in real space and reciprocal space with high resolution. Here we present a study of the surface structure of 2H-MoS2 using μLEED intensity-voltage analysis. To aid this analysis, software is under development to automate the procedure of extracting I(V) curves from LEEM and LEED data. When matched with computational modeling, this data provides information with angstrom level resolution concerning the three dimensional atomic positions. We demonstrate that the surface structure of bulk MoS2 is distinct from the bulk crystal structure and exhibits a smaller surface relaxation at 320K compared to previous results at 95K. Furthermore, suspended monolayer samples exhibit large interlayer relaxations compared to the bulk surface termination. Further techniques for refining layer thickness determination are under development.

On stress/strain shielding and the material stiffness paradigm for dental implants.

PubMed

Korabi, Raoof; Shemtov-Yona, Keren; Rittel, Daniel

2017-10-01

Stress shielding considerations suggest that the dental implant material's compliance should be matched to that of the host bone. However, this belief has not been confirmed from a general perspective, either clinically or numerically. To characterize the influence of the implant stiffness on its functionality using the failure envelope concept that examines all possible combinations of mechanical load and application angle for selected stress, strain and displacement-based bone failure criteria. Those criteria represent bone yielding, remodeling, and implant primary stability, respectively MATERIALS AND METHODS: We performed numerical simulations to generate failure envelopes for all possible loading configurations of dental implants, with stiffness ranging from very low (polymer) to extremely high, through that of bone, titanium, and ceramics. Irrespective of the failure criterion, stiffer implants allow for improved implant functionality. The latter reduces with increasing compliance, while the trabecular bone experiences higher strains, albeit of an overall small level. Micromotions remain quite small irrespective of the implant's stiffness. The current paradigm favoring reduced implant material's stiffness out of concern for stress or strain shielding, or even excessive micromotions, is not supported by the present calculations, that point exactly to the opposite. © 2017 Wiley Periodicals, Inc.

KSC Electrostatic Discharge (ESD) Issues

NASA Technical Reports Server (NTRS)

Buhler, Charles

2008-01-01

Discussion of key electrostatic issues that have arisen during the past few years at KSC that the Electrostatics Laboratory has studied. The lab has studied in depth the Space Shuttle's Thermal Control System Blankets, the International Space Station Thermal Blanket, the Pan/Tilt Camera Blankets, the Kapton Purge Barrier Curtain, the Aclar Purge Barrier Curtain, the Thrust Vector Controller Blankets, the Tyvek Reaction Control System covers, the AID-PAK and FLU-9 pyro inflatable devices, the Velostat Solid Rocket Booster mats, and the SCAPE suits. In many cases these materials are insulating meaning that they might be a source of unsafe levels of electrostatic discharge (ESD). For each, the lab provided in-depth testing of each material within its current configuration to ensure that it does not cause an ESD concern that may violate the safety of the astronauts, the workers and equipment for NASA. For example the lab provides unique solutions and testing such as Spark Incendivity Testing that checks whether a material is capable of generating a spark strong enough to ignite a flammable gas. The lab makes recommendations to changes in specifications, procedures, and material if necessary. The lab also consults with a variety of non-safety related ESD issues for the agency.

Employing volcanic tuff minerals in interior architecture design to reduce microbial contaminants and airborne fungal carcinogens of indoor environments.

PubMed

Gedikoglu, Yaman; Gedikoglu, Gunduz; Berkin, Genco; Ceyhan, Taskin; Altinoz, Meric A

2012-09-01

Indoor volatile organic compounds (VOCs) have posed significant risks to human health since people have both shifted to a life spent, for the most part, indoors. Further, changes in materials used in the construction of buildings, furnishings, and tools either leak or encourage the production of VOCs. Whether these enclosed areas are residences, hospitals or workplaces (specifically composting facilities or closed farm buildings for raising livestock), VOCs can rise to levels that threaten people's health. VOCs can either originate from phenolic and benzene-like compounds in building materials and office furniture or from molds (fungi) growing inside improperly ventilated or sealed buildings. Regardless of the source, exposure to VOCs could lead to significant health concerns from sick-building syndrome, 'leukemia houses,' in-hospital fungemia cases or occupation-associated cancer epidemics due to aflatoxicosis. Innovative 21st-century building materials could offer solutions to these challenges. We propose that volcanic materials, clays and minerals (volcanic tuff, modified clay montmorillonite and mineral clinoptilolite), in their original or chemically modified form, could act like synthetic lungs in building walls, breathing and filtering VOCs, and thus limiting human exposure to disease.

An Innovative Approach to Control Steel Reinforcement Corrosion by Self-Healing

PubMed Central

2018-01-01

The corrosion of reinforced steel, and subsequent reinforced concrete degradation, is a major concern for infrastructure durability. New materials with specific, tailor-made properties or the establishment of optimum construction regimes are among the many approaches to improving civil structure performance. Ideally, novel materials would carry self-repairing or self-healing capacities, triggered in the event of detrimental influence and/or damage. Controlling or altering a material’s behavior at the nano-level would result in traditional materials with radically enhanced properties. Nevertheless, nanotechnology applications are still rare in construction, and would break new ground in engineering practice. An approach to controlling the corrosion-related degradation of reinforced concrete was designed as a synergetic action of electrochemistry, cement chemistry and nanotechnology. This contribution presents the concept of the approach, namely to simultaneously achieve steel corrosion resistance and improved bulk matrix properties. The technical background and challenges for the application of polymeric nanomaterials in the field are briefly outlined in view of this concept, which has the added value of self-healing. The credibility of the approach is discussed with reference to previously reported outcomes, and is illustrated via the results of the steel electrochemical responses and microscopic evaluations of the discussed materials. PMID:29461495

Dechlorination of small quantities of mixed waste from a DOE site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoeffner, S.L.

1994-12-31

Sludge from tank bottoms containing PCB`s, radioactivity and hazardous constituents are present in several tanks at one of the National Laboratories. Disposal of the material can proceed if the material is removed from TSCA regulations by decreasing the concentration of the PCB`s to {le}2 ppm. ON the bench scale, this sludge was treated by the DECHLOR/KGME{sup {trademark}} chemical dechlorination process. The levels of PCB`s were reduced to below 2 ppm, allowing the material to be managed outside the TSCA regulations. RUST believes that this is the first successful chemical dechlorination of a radioactive, RCRA listed, PCB bearing waste. A pilotmore » scale unit is available to provide on-site treatment of the remaining waste. Because of the small amounts of waste, treatment costs are high on a per unit volume. As a result of these high costs and other concerns the client is investigating potential non-treatment options of delisting the waste of obtaining a waiver. In the event that this particular waste cannot be delisted or a waiver is not granted, then dechlorination of the waste to remove it from TSCA regulations remains a viable option to allow the material to be disposed.« less

Determination of perfluorinated alkyl acid concentrations in biological standard reference materials.

PubMed

Reiner, Jessica L; O'Connell, Steven G; Butt, Craig M; Mabury, Scott A; Small, Jeff M; De Silva, Amila O; Muir, Derek C G; Delinsky, Amy D; Strynar, Mark J; Lindstrom, Andrew B; Reagen, William K; Malinsky, Michelle; Schäfer, Sandra; Kwadijk, Christiaan J A F; Schantz, Michele M; Keller, Jennifer M

2012-11-01

Standard reference materials (SRMs) are homogeneous, well-characterized materials used to validate measurements and improve the quality of analytical data. The National Institute of Standards and Technology (NIST) has a wide range of SRMs that have mass fraction values assigned for legacy pollutants. These SRMs can also serve as test materials for method development, method validation, and measurement for contaminants of emerging concern. Because inter-laboratory comparison studies have revealed substantial variability of measurements of perfluoroalkyl acids (PFAAs), future analytical measurements will benefit from determination of consensus values for PFAAs in SRMs to provide a means to demonstrate method-specific performance. To that end, NIST, in collaboration with other groups, has been measuring concentrations of PFAAs in a variety of SRMs. Here we report levels of PFAAs and perfluorooctane sulfonamide (PFOSA) determined in four biological SRMs: fish tissue (SRM 1946 Lake Superior Fish Tissue, SRM 1947 Lake Michigan Fish Tissue), bovine liver (SRM 1577c), and mussel tissue (SRM 2974a). We also report concentrations for three in-house quality-control materials: beluga whale liver, pygmy sperm whale liver, and white-sided dolphin liver. Measurements in SRMs show an array of PFAAs, with perfluorooctane sulfonate (PFOS) being the most frequently detected. Reference and information values are reported for PFAAs measured in these biological SRMs.

Production of a Novel Mineral-based Sun Lotion for Protecting the Skin from Biohazards of Electromagnetic Radiation in the UV Region.

PubMed

Movahedi, M M; Alipour, A; Mortazavi, S A R; Tayebi, M

2014-03-01

Sun protection materials have been one of the major concerns in pharmaceutical in-dustry since almost one century ago. Various materials have been found to have such an effect but there are still many unknown substances that have not been discovered. Objective : To introduce a novel mineral-based sun lotion with considerable UV absorption properties compared to commercially available sunscreens.  UV absorption properties of transparent plas-tic sheets covered by a uniform cream layer of different mineral-based sun lotions and a commercially available sun lotion were tested. Sun lotions containing specific proportion of bentonite and zeolite minerals were capable of absorbing the highest level of UV light com-pared to that of the commercially available sun lotion. Mineral-based sun lotions can be considered as cost effective alternatives for current commercial sunscreens.

Metal enrichments in solid bitumens: A review

NASA Astrophysics Data System (ADS)

Parnell, J.

1988-07-01

The association of oils and solid bitumens with ore deposits is widely recorded. The oils and bitumens may actually be enriched with metals. Unlike oils, metal enrichments within bitumens do not reflect the role of petroleum as a transporting agent for metals. By contrast, they may be a result of the reduction of metal ions on contact with bitumen, and may reach levels so high that ore mineral inclusions are precipitated. Metal determinations of British bitumens suggest that new metal anomalies can be detected by this approach, that some metal anomalies within bitumens may be related to ore mineralization, and that bitumens from different sources may be distinguished by their metal contents. The potential use of bitumen distribution and/or metal enrichment within bitumen for ore exploration is dependent on the metal concerned, and in particular whether the metal is transported by association with organic materials or reduced in the presence of organic materials.

Production of a Novel Mineral-based Sun Lotion for Protecting the Skin from Biohazards of Electromagnetic Radiation in the UV Region

PubMed Central

Movahedi, M M; Alipour, A; Mortazavi, S A R; Tayebi, M

2014-01-01

Background: Sun protection materials have been one of the major concerns in pharmaceutical in­dustry since almost one century ago. Various materials have been found to have such an effect but there are still many unknown substances that have not been discovered. Objective: To introduce a novel mineral-based sun lotion with considerable UV absorption properties compared to commercially available sunscreens. Method:  UV absorption properties of transparent plas­tic sheets covered by a uniform cream layer of different mineral-based sun lotions and a commercially available sun lotion were tested. Results: Sun lotions containing specific proportion of bentonite and zeolite minerals were capable of absorbing the highest level of UV light com­pared to that of the commercially available sun lotion. Conclusion: Mineral-based sun lotions can be considered as cost effective alternatives for current commercial sunscreens. PMID:25505763

Luminescence induced by dehydration of kaolin - Association with electron-spin-active centers and with surface activity for dehydration-polymerization of glycine

NASA Technical Reports Server (NTRS)

Coyne, L.; Hovatter, W.; Sweeney, M.

1983-01-01

Experimental data concerning emission of light upon dehydration as a function of preheating and pre-gamma-irradiation are correlated with reported studies of electron-spin resonance (ESR) activity after similar pretreatments. The effect of these pretreatments on the kaolin-promoted incorporation of glycine into peptide oligomers in a wet/cold, hot/dry fluctuating environment is compared to their effect on the ESR and luminescent signals. The existence of spectroscopically active centers appears to be loosely anticorrelated with reaction yield; these yields are increased by increasing the overall energy content of the material. It is concluded that some part of the chemical yield is produced by a mechanism involving intrinsic, excited electronic states of the clay crystal lattice. These states may be derived from thermally, interfacially, and/or mechanically induced charge reorganization within interspersed energy levels in the band structure of the material.

Removal of microcystin-LR from spiked water using either activated carbon or anthracite as filter material.

PubMed

Drogui, Patrick; Daghrir, Rimeh; Simard, Marie-Christine; Sauvageau, Christine; Blais, Jean François

2012-01-01

The occurrence of cyanobacterial toxins (blue-green algae) in drinking water sources is a big concern for human health. Removal of microcystin-LR (MC-LR) from drinking water was evaluated at the laboratory pilot scale using either granular activated carbon (GAC) or powdered activated carbon (PAC) and compared with the treatment using anthracite as filter material. Virgin GAC was more effective at removing MC-LR (initial concentration ranging from 9 to 47 microg L(-1)) to reach the World Health Organization recommended level (1.0 microg L(-1)). When the GAC filter was colonized by bacteria, the filter became less effective at removing MC-LR owing to competitive reactions occurring between protein adsorption (released by bacteria) and MC-LR adsorption. Using PAC, the concentration of MC-LR decreased from 22 to 3 microg L(-1) (removal of 86% of MC-LR) by the addition of 100 mg PAC L(-1).

The recoil implantation technique developed at the U-120 cyclotron in Bucharest

NASA Astrophysics Data System (ADS)

Muntele, C. I.; Simil, L. Popa; Racolta, P. M.; Voiculescu, D.

1999-06-01

At the U-120 cyclotron in Bucharest was developed 15 years ago the thin layer activation (TLA) technique for radioactive labeling of metallic components on depths ranging between 100 μm and 300 μm, for wear/corrosion studies. Aiming to extend these kinds of studies on non-metallic components and at sub-micrometric level we were led to the development of the recoil implantation technique for ultra thin layer activation (UTLA) applications. Due to the low energy of the recoils obtained in a sacrificial target from a nuclear reaction, the surface layer of material to be labeled must be as thick as a few hundred nanometers. Also, since the radiotracer is externally created, there are no restrictions for the kind of material to be labeled, except to be a solid. In this paper we present some results of our studies concerning the actual status of this application at our accelerator.

Cuing consumerism: situational materialism undermines personal and social well-being.

PubMed

Bauer, Monika A; Wilkie, James E B; Kim, Jung K; Bodenhausen, Galen V

2012-05-01

Correlational evidence indicates that materialistic individuals experience relatively low levels of well-being. Across four experiments, we found that situational cuing can also trigger materialistic mind-sets, with similarly negative personal and social consequences. Merely viewing desirable consumer goods resulted in increases in materialistic concerns and led to heightened negative affect and reduced social involvement (Experiment 1). Framing a computer task as a "Consumer Reaction Study" led to a stronger automatic bias toward values reflecting self-enhancement, compared with framing the same task as a "Citizen Reaction Study" (Experiment 2). Consumer cues also increased competitiveness (Experiment 3) and selfishness in a water-conservation dilemma (Experiment 4). Thus, the costs of materialism are not localized only in particularly materialistic people, but can also be found in individuals who happen to be exposed to environmental cues that activate consumerism-cues that are commonplace in contemporary society.

Sound absorption of low-temperature reusable surface insulation candidate materials

NASA Technical Reports Server (NTRS)

Johnston, J. D.

1974-01-01

Sound absorption data from tests of four candidate low-temperature reusable surface insulation materials are presented. Limitations on the use of the data are discussed, conclusions concerning the effective absorption of the materials are drawn, and the relative significance to Vibration and Acoustic Test Facility test planning of the absorption of each material is assessed.

Development of improved ablative materials for ASRM. [Advanced Solid Rocket Motor

NASA Technical Reports Server (NTRS)

Canfield, A.; Armour, W.; Clinton, R.

1991-01-01

A program to improve ablative materials for the Advanced Solid Rocket Motor (ASRM) is briefly discussed. The main concerns with the baseline material are summarized along with the measures being undertaken to obtain improvements. The materials involved in the program, all of which have been manufactured and are now being evaluated, are mentioned.

Generation and Evaluation of Lunar Dust Adhesion Mitigating Materials

NASA Technical Reports Server (NTRS)

Wohl, Christopher J.; Connell, John W.; Lin, Yi; Belcher, Marcus A.; Palmieri, Frank L.

2011-01-01

Particulate contamination is of concern in a variety of environments. This issue is especially important in confined spaces with highly controlled atmospheres such as space exploration vehicles involved in extraterrestrial surface missions. Lunar dust was a significant challenge for the Apollo astronauts and will be of greater concern for longer duration, future missions. Passive mitigation strategies, those not requiring external energy, may decrease some of these concerns, and have been investigated in this work. A myriad of approaches to modify the surface chemistry and topography of a variety of substrates was investigated. These involved generation of novel materials, photolithographic techniques, and other template approaches. Additionally, single particle and multiple particle methods to quantitatively evaluate the particle-substrate adhesion interactions were developed.

Physics of Failure Analysis of Xilinx Flip Chip CCGA Packages: Effects of Mission Environments on Properties of LP2 Underfill and ATI Lid Adhesive Materials

NASA Technical Reports Server (NTRS)

Suh, Jong-ook

2013-01-01

The Xilinx Virtex 4QV and 5QV (V4 and V5) are next-generation field-programmable gate arrays (FPGAs) for space applications. However, there have been concerns within the space community regarding the non-hermeticity of V4/V5 packages; polymeric materials such as the underfill and lid adhesive will be directly exposed to the space environment. In this study, reliability concerns associated with the non-hermeticity of V4/V5 packages were investigated by studying properties and behavior of the underfill and the lid adhesvie materials used in V4/V5 packages.

Stainless Steel Corrosion Studies Final Report: FY17 End of-Year

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, Daniel; Milenski, Helen Marie; Martinez, Destiny

Two materials are being considered in applications requiring their contact against stainless steel surfaces. These materials include the solvent methyl ethyl ketone (MEK), and the polymer neoprene (polychloroprene). There is concern that contact of these materials with stainless steel substrates may lead to corrosion. To address these concerns we have undertaken corrosion studies under conditions expected to be more aggressive than in intended applications. These conditions include elevated temperature and humidity, and submersion and suspension in solvent vapors, in an attempt to accelerate any potential deleterious interactions. Corrosion rates below 0.1 mpy have historically been deemed INSIGNIFICANT from a WRmore » Production standpoint; corresponding guidelines for non-production applications are lacking.« less

Future Sources of Organic Raw Materials.

ERIC Educational Resources Information Center

Shapiro, Irving S.

1978-01-01

Examines the need for industrial organization, academic institutions, and national governments to agree on cooperative roles in planning the future raw materials demands of the chemical industry. Political and social concerns, as well as technical and economic considerations, are important to the raw material future of the industry. (MA)

Proyecto Leer Bulletin, Number 9.

ERIC Educational Resources Information Center

Benson, Susan Shattuck

This bulletin lists addresses of publishers and distributors of audiovisual instructional materials in Spanish in the United States and Latin America. Sources are listed in four categories: (1) federal sources of materials, information on materials, names of resource people, programs, and proposal guidelines concerning the Spanish speaking; (2)…

Role of Friction in Materials Selection for Automotive Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blau, Peter Julian

This is an invited article for a special issue of the ASM International monthly magazine that concerns "Automotive Materials and Applications." The article itself overviews frictional considerations in material selection for automobiles. It discusses implications for energy efficiency (engine friction) and safety (brakes) among other topics.

Human Genetics. Informational and Educational Materials, Vol. I, No. 1.

ERIC Educational Resources Information Center

National Clearinghouse for Human Genetic Diseases (DHEW/PHS), Rockville, MD.

This catalogue, prepared by the National Clearinghouse for Human Genetic Diseases, provides educational and informational materials on the latest advances in testing, diagnosing, counseling, and treating individuals with a concern for genetic diseases. The materials include books, brochures, pamphlets, journal articles, audio cassettes,…

Material cutting, shaping, and forming: A compilation

NASA Technical Reports Server (NTRS)

1974-01-01

Information is presented concerning cutting, shaping, and forming of materials, and the equipment and techniques required for utilizing these materials. The use of molds, electrical fields, and mechanical devices are related to forming materials. Material cutting methods by devices including borers and slicers are presented along with chemical techniques. Shaping and fabrication techniques are described for tubing, honeycomb panels, and ceramic structures. The characteristics of the materials are described. Patent information is included.

Radiological protection in North American naturally occurring radioactive material industries.

PubMed

Chambers, D B

2015-06-01

All soils and rocks contain naturally occurring radioactive material (NORM). Many ores and raw materials contain relatively high levels of natural radionuclides, and processing such materials can further increase the concentrations of natural radionuclides, sometimes referred to as 'technologically enhanced naturally occurring radioactive material' (TENORM). Examples of NORM minerals include uranium ores, monazite (a source of rare earth minerals), and phosphate rock used to produce phosphate fertiliser. Such activities have the potential to result in above background radiation exposure to workers and the public. The objective of this paper is to review the sources and exposure from NORM in North American industries, and provide a perspective on the potential radiological hazards to workers and the environment. Proper consideration of NORM issues is important and needs to be integrated in the assessment of these projects. Concerns over radioactivity and radiation amongst non-governmental organisations and the local public have resulted in the cancellation of NORM mining and mineral extraction projects, as well as inhibition of the safe use of by-product materials from various NORM industries. This paper also briefly comments on the current regulatory framework for NORM (TENORM) in Canada and the USA, as well as the potential implications of the recent activities of the International Commission on Radiological Protection for NORM industries. © The International Society for Prosthetics and Orthotics Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

The Electronic and Electro-Optic Future of III-V Semiconductor Compounds.

DTIC Science & Technology

1978-12-01

An assessment of material development of III-V compounds for electro - optic , microwave and millimeter wave technology is presented. Questions concerning material selection, needs and processing is addressed. (Author)

Emergency preparedness and planning

NASA Technical Reports Server (NTRS)

Bouvier, Kenneth

1993-01-01

Monsanto's emergency response plan in dealing with hazardous materials at their facilities is presented. Topics discussed include the following: CPR training; emergency medial training; incident reports; contractor injuries; hazardous materials transport; evacuation; and other industrial safety concerns.

Analysis of radiopacity, pH and cytotoxicity of a new bioceramic material.

PubMed

Souza, Letícia Chaves de; Yadlapati, Mamatha; Dorn, Samuel O; Silva, Renato; Letra, Ariadne

2015-01-01

RetroMTA® is a new hydraulic bioceramic indicated for pulp capping, perforations or root resorption repair, apexification and apical surgery. The aim of this study was to compare the radiopacity, pH variation and cytotoxicity of this material to ProRoot® MTA. Mixed cements were exposed to a digital x-ray along with an aluminum stepwedge for the radiopacity assay. pH values were verified after incubation period of 3, 24, 48, 72 and 168 hours. The cytotoxicity of each cement was tested on human periodontal ligament fibroblasts using a multiparametric assay. Data analysis was performed using ANOVA and Tukey'spost hoc in GraphPad Prism. ProRoot® MTA had higher radiopacity than RetroMTA®(p<0.001). No significant differences were observed for the pH of the materials throughout experimental periods (p>0.05) although pH levels of both materials reduced over time. Both ProRoot® MTA and RetroMTA® allowed for significantly higher cell viability when compared with the positive control (p<0.001). No statistical difference was observed between ProRoot® MTA and RetroMTA® cytotoxicity level in all test parameters, except for the ProRoot® MTA 48-hour extract media in the NR assay (p<0.05). The current study provides new data about the physicochemical and biological properties of Retro® MTA concerning radiopacity, pH and cytotoxic effects on human periodontal ligaments cells. Based on our findings, RetroMTA® meets the radiopacity requirements standardized by ANSI/ADA number 572, and similar pH values and biocompatibility to ProRoot® MTA. Further studies should be performed to evaluate additional properties of this new material.

Models of an In-Situ Propellant Production Plant for Mars Exploration

NASA Technical Reports Server (NTRS)

Goodrich, Charlie; Kurien, James; Millar, Bill; Sweet, Adam; Waterman, Sue; Clancy, Daniel (Technical Monitor)

2001-01-01

An in-situ propellant production system (ISPP) is designed to make rocket fuel from chemicals in the Martian atmosphere in order to reduce the amount of materials that would need to be brought from Earth to support Mars missions. We have developed a description of a hypothetical ISPP system that we would like to make available to researchers who are interested in the problem of automatically diagnosing failures in complex NASA systems. This problem description will help researchers to investigate problems of interest to NASA. We would like to make the following material publicly available: (1) a 'common sense' model of an ISPP system; (2) low- and medium-fidelity simulations of the ISPP system written in Microsoft Excel and HCC; and (3) previously published data and diagrams concerning ISPP components. We do not believe there are any export considerations on these materials for the following reasons: (1) These models are not useful for guidance and real time control of vehicles, encrpytion, or any other software purpose categorized under the Export Control Classification Numbers; and (2) The models are very high level and would not by themselves enable real-time control of a real hardware system. The models are at the level of common sense. They capture, for example, that if a heater is turned on an increase in temperature should result(see the attached excerpt). We do not believe there is any commercial value to this material, given the low commercial demand for propellant plants on mars. We have spoken to acting Code IC Division Chief Dan Clancy, and he concurs with our desire to make these materials publicly available via a technical report.

Astrium Technological Roadmaps for the Next Generation of Launchers Challenges

NASA Astrophysics Data System (ADS)

Larnac, Guy

2014-06-01

Main requirement on Ariane 6 are robustness, overall ownership cost and environmental impacts. To be able to meet these requirements it's mandatory to modify our usual way of working and to think the development and qualification of technologies differently. Airbus Defence and Space in the domain of materials, technologies and structures proposes a vision which address these points declined at different level:- Selection of key metallic and composite technologies to reduce drastically the cost of manufacturing,- Implementation of robust and economical way of assembly, promoting adhesive bonding and innovative technologies- Introducing virtual testing approach coupled with advanced methods and process simulation- Introduction of in-line monitoring to reduce cost of control- Implementation of the design for environment methodology with life cycle analysis to support the choice of technologies and materials- Development of EADS common materials to get benefice of aeronautic supply chain and communalitiesTo be efficient it seems evident and mandatory to develop all these approaches in an integrated and coordinated way. Advanced technologies and methodologies are supported by a strong network of collaboration enabling the integration of upstream ideas and concepts. This network is not only focused on low TRL level. Within EADS divisions intensive collaboration is deployed in order to get synergies. On the other side it's also mandatory for reliability and obsolescence issues to take care and master the supply chain.Additive layer manufacturing and thermoplastic based composite are directly concerned by this problematic. We present how, in the domain of materials and structures, aeronautic materials are considered first and how the mechanism of common qualification shared within EADS is now developed.This vision is being implemented within Airbus Defence and Space, described and reported through roadmaps. These roadmaps are the core of Airbus defence and Space strategies for the incoming years.

Summary of efficiency testing of standard and high-capacity high-efficiency particulate air filters subjected to simulated tornado depressurization and explosive shock waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, P.R.; Gregory, W.S.

1985-04-01

Pressure transients in nuclear facility air cleaning systems can originate from natural phenomena such as tornadoes or from accident-induced explosive blast waves. This study was concerned with the effective efficiency of high-efficiency particulate air (HEPA) filters during pressure surges resulting from simulated tornado and explosion transients. The primary objective of the study was to examine filter efficiencies at pressure levels below the point of structural failure. Both standard and high-capacity 0.61-m by 0.61-m HEPA filters were evaluated, as were several 0.2-m by 0.2-m HEPA filters. For a particular manufacturer, the material release when subjected to tornado transients is the samemore » (per unit area) for both the 0.2-m by 0.2-m and the 0.61-m by 0.61-m filters. For tornado transients, the material release was on the order of micrograms per square meter. When subjecting clean HEPA filters to simulated tornado transients with aerosol entrained in the pressure pulse, all filters tested showed a degradation of filter efficiency. For explosive transients, the material release from preloaded high-capacity filters was as much as 340 g. When preloaded high-capacity filters were subjected to shock waves approximately 50% of the structural limit level, 1 to 2 mg of particulate was released.« less

78 FR 51213 - In the Matter of Certain Licensees Requesting Unescorted Access to Radioactive Material; Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

... license authorizes it to perform services on devices containing certain radioactive material for customers... Possess Sources Containing Radioactive Material Quantities of Concern,'' stated that ``service providers..., Fingerprinting Order, paragraph IC 1.c of the prior Order was superseded by the requirement that ``Service...

Materials Handling. Module SH-01. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

Developing a Culture of Readers: Complementary Materials That Engage

ERIC Educational Resources Information Center

Sailors, Misty; Kaambankadzanja, Davie

2017-01-01

Many professionals, including members of the International Literacy Association, are concerned with the lack of reading materials in classrooms across the world. In this paper, the authors present the creation of high-quality, locally produced, complementary reading materials in Malawi, where there are very few children's books and few…

Career Opportunities Instructional Guide. Spanish Student Materials.

ERIC Educational Resources Information Center

Hendrix, Mary W.; And Others

This document is the Spanish language version of the student materials component designed to accompany the Career Opportunities Instructional Guide. Page numbers are consistent with numbering in that guide. Seventeen units are provided. The materials in Unit 1 concern various aspects of locating information about occupations; Unit 2 provides an…

Career Opportunities Instructional Guide. Student Materials.

ERIC Educational Resources Information Center

Hendrix, Mary W.

These student materials are designed to accompany the Career Opportunities Instructional Guide. Page numbers are consistent with the numbering in that guide. Seventeen units are provided. The materials in Unit 1 concern aspects of locating information about occupations; Unit 2 provides an introduction to the 15 occupational clusters. Each of the…

“When You’re a Baby You Don’t Have Puberty”: Understanding of Puberty and Human Reproduction in Late Childhood and Early Adolescence

PubMed Central

Hurwitz, Lisa B.; Lauricella, Alexis R.; Hightower, Brianna; Sroka, Iris; Woodruff, Teresa K.; Wartella, Ellen

2017-01-01

Basic knowledge of human reproduction can help youth prepare for puberty and make later classes focused on advanced reproductive health topics manageable. With the intention of potentially informing the creation of learning materials, we conducted a needs assessment among children ages 7 to 12 in our suburban Chicago community to ascertain their current understanding of, and beliefs and misconceptions about, human reproduction, and to determine their needs for additional reproductive health education. We held qualitative focus group interviews with local children. Participants primarily reported learning about these topics from their parents prior to receiving school-based education in fifth grade. Their level of understanding was relatively low. They had little knowledge of internal sexual organs, expressed a range of beliefs about conception ranging from inaccurate to accurate but incomplete, and voiced concerns about transitioning into adolescence. This suggests a need for additional resources that provide comprehensible descriptions of reproductive health processes and mitigate puberty-related concerns. PMID:28931963

New robotics: design principles for intelligent systems.

PubMed

Pfeifer, Rolf; Iida, Fumiya; Bongard, Josh

2005-01-01

New robotics is an approach to robotics that, in contrast to traditional robotics, employs ideas and principles from biology. While in the traditional approach there are generally accepted methods (e. g., from control theory), designing agents in the new robotics approach is still largely considered an art. In recent years, we have been developing a set of heuristics, or design principles, that on the one hand capture theoretical insights about intelligent (adaptive) behavior, and on the other provide guidance in actually designing and building systems. In this article we provide an overview of all the principles but focus on the principles of ecological balance, which concerns the relation between environment, morphology, materials, and control, and sensory-motor coordination, which concerns self-generated sensory stimulation as the agent interacts with the environment and which is a key to the development of high-level intelligence. As we argue, artificial evolution together with morphogenesis is not only "nice to have" but is in fact a necessary tool for designing embodied agents.

Effect of fall-related concerns on physical, mental, and social function in community-dwelling older adults: a prospective cohort study.

PubMed

van der Meulen, Erik; Zijlstra, G A Rixt; Ambergen, Ton; Kempen, Gertrudis I J M

2014-12-01

To determine the effect of fall-related concerns on physical, mental, and social function. Community-based prospective cohort study (secondary analysis using control group data from a randomized controlled trial). Two municipalities in the south of the Netherlands. Community-dwelling older adults (N = 260). Two groups were created using Modified Falls Efficacy Scale scores (high and low levels of fall-related concerns). Five outcome measures representing physical, mental, and social function were included: activities of daily living (ADLs), symptoms of depression, feelings of anxiety, social participation, and social support interactions. Outcomes were measured at baseline and at 2, 8, and 14 months. Data were analyzed using analysis of covariance and mixed-effect regression models for longitudinal data, adjusting for age, sex, living status (alone or with another person), educational level, cognitive status, self-perceived health, and falls history at baseline. At baseline, significantly more limitations in ADLs and social participation were found for older persons with high levels of fall-related concerns than for those with low levels of concern. These differences persisted over 14 months of follow-up and were consistent over time. No significant differences were found for symptoms of depression, feelings of anxiety, or social support interactions, except for feelings of anxiety at 14 months. Older persons with higher levels of fall-related concerns reported up to 14 months poorer ADL and social participation for up to 14 months than those with lower levels of fall-related concerns. From a clinical point of view, the clear relationship between fall-related concerns and ADL dysfunction and social participation may help to target groups who are at risk of developing adverse consequences of concerns about falls. © 2014, Copyright the Authors Journal compilation © 2014, The American Geriatrics Society.

Using process monitor wafers to understand directed self-assembly defects

NASA Astrophysics Data System (ADS)

Cao, Yi; Her, YoungJun; Delgadillo, Paulina R.; Vandenbroeck, Nadia; Gronheid, Roel; Chan, Boon Teik; Hashimoto, Yukio; Romo, Ainhoa; Somervell, Mark; Nafus, Kathleen; Nealey, Paul F.

2013-03-01

As directed self-assembly (DSA) has gained momentum over the past few years, questions about its application to high volume manufacturing have arisen. One of the major concerns is about the fundamental limits of defectivity that can be attained with the technology. If DSA applications demonstrate defectivity that rivals of traditional lithographic technologies, the pathway to the cost benefits of the technology creates a very compelling case for its large scale implementation. To address this critical question, our team at IMEC has established a process monitor flow to track the defectivity behaviors of an exemplary chemo-epitaxy application for printing line/space patterns. Through establishing this baseline, we have been able to understand both traditional lithographic defect sources in new materials as well as new classes of assembly defects associated with DSA technology. Moreover, we have explored new materials and processing to lower the level of the defectivity baseline. The robustness of the material sets and process is investigated as well. In this paper, we will report the understandings learned from the IMEC DSA process monitor flow.

Quantum formulation for nanoscale optical and material chirality: symmetry issues, space and time parity, and observables

NASA Astrophysics Data System (ADS)

Andrews, D. L.

2018-03-01

To properly represent the interplay and coupling of optical and material chirality at the photon-molecule or photon-nanoparticle level invites a recognition of quantum facets in the fundamental aspects and mechanisms of light-matter interaction. It is therefore appropriate to cast theory in a general quantum form, one that is applicable to both linear and nonlinear optics as well as various forms of chiroptical interaction including chiral optomechanics. Such a framework, fully accounting for both radiation and matter in quantum terms, facilitates the scrutiny and identification of key issues concerning spatial and temporal parity, scale, dissipation and measurement. Furthermore it fully provides for describing the interactions of structured or twisted light beams with a vortex character, and it leads to the complete identification of symmetry conditions for materials to provide for chiral discrimination. Quantum considerations also lend a distinctive perspective to the very different senses in which other aspects of chirality are recognized in metamaterials. Duly attending to the symmetry principles governing allowed or disallowed forms of chiral discrimination supports an objective appraisal of the experimental possibilities and developing applications.

Comparing urban solid waste recycling from the viewpoint of urban metabolism based on physical input-output model: A case of Suzhou in China.

PubMed

Liang, Sai; Zhang, Tianzhu

2012-01-01

Investigating impacts of urban solid waste recycling on urban metabolism contributes to sustainable urban solid waste management and urban sustainability. Using a physical input-output model and scenario analysis, urban metabolism of Suzhou in 2015 is predicted and impacts of four categories of solid waste recycling on urban metabolism are illustrated: scrap tire recycling, food waste recycling, fly ash recycling and sludge recycling. Sludge recycling has positive effects on reducing all material flows. Thus, sludge recycling for biogas is regarded as an accepted method. Moreover, technical levels of scrap tire recycling and food waste recycling should be improved to produce positive effects on reducing more material flows. Fly ash recycling for cement production has negative effects on reducing all material flows except solid wastes. Thus, other fly ash utilization methods should be exploited. In addition, the utilization and treatment of secondary wastes from food waste recycling and sludge recycling should be concerned. Copyright © 2011 Elsevier Ltd. All rights reserved.

Interrogating the catalytic mechanism of nanoparticle mediated Stille coupling reactions employing bio-inspired Pd nanocatalysts.

PubMed

Pacardo, Dennis B; Slocik, Joseph M; Kirk, Kyle C; Naik, Rajesh R; Knecht, Marc R

2011-05-01

To address issues concerning the global environmental and energy state, new catalytic technologies must be developed that translate ambient and efficient conditions to heavily used reactions. To achieve this, the structure/function relationship between model catalysts and individual reactions must be critically discerned to identify structural motifs responsible for the reactivity. This is especially true for nanoparticle-based systems where this level of information remains limited. Here we present evidence indicating that peptide-capped Pd nanoparticles drive Stille C-C coupling reactions via Pd atom leaching. Through a series of reaction studies, the materials are shown to be optimized for reactivity under ambient conditions where increases in temperature or catalyst concentration deactivate reactivity due to the leaching process. A quartz crystal microbalance analysis demonstrates that Pd leaching occurs during the initial oxidative addition step at the nanoparticle surface by aryl halides. Together, this suggests that peptide-based materials may be optimally suited for use as model systems to isolate structural motifs responsible for the generation of catalytically reactive materials under ambient synthetic conditions. © The Royal Society of Chemistry 2011

Interrogating the catalytic mechanism of nanoparticle mediated Stille coupling reactions employing bio-inspired Pd nanocatalysts

NASA Astrophysics Data System (ADS)

Pacardo, Dennis B.; Slocik, Joseph M.; Kirk, Kyle C.; Naik, Rajesh R.; Knecht, Marc R.

2011-05-01

To address issues concerning the global environmental and energy state, new catalytic technologies must be developed that translate ambient and efficient conditions to heavily used reactions. To achieve this, the structure/function relationship between model catalysts and individual reactions must be critically discerned to identify structural motifs responsible for the reactivity. This is especially true for nanoparticle-based systems where this level of information remains limited. Here we present evidence indicating that peptide-capped Pd nanoparticles drive Stille C-C coupling reactions via Pd atom leaching. Through a series of reaction studies, the materials are shown to be optimized for reactivity under ambient conditions where increases in temperature or catalyst concentration deactivate reactivity due to the leaching process. A quartz crystal microbalance analysis demonstrates that Pd leaching occurs during the initial oxidative addition step at the nanoparticle surface by aryl halides. Together, this suggests that peptide-based materials may be optimally suited for use as model systems to isolate structural motifs responsible for the generation of catalytically reactive materials under ambient synthetic conditions.

The Japan Flavour and Fragrance Materials Association's (JFFMA) safety assessment of acetal food flavouring substances uniquely used in Japan.

PubMed

Okamura, Hiroyuki; Abe, Hajime; Hasegawa-Baba, Yasuko; Saito, Kenji; Sekiya, Fumiko; Hayashi, Shim-Mo; Mirokuji, Yoshiharu; Maruyama, Shinpei; Ono, Atsushi; Nakajima, Madoka; Degawa, Masakuni; Ozawa, Shogo; Shibutani, Makoto; Maitani, Tamio

2015-01-01

Using the procedure devised by the Joint FAO/WHO Expert Committee on Food Additives (JECFA), we performed safety evaluations on five acetal flavouring substances uniquely used in Japan: acetaldehyde 2,3-butanediol acetal, acetoin dimethyl acetal, hexanal dibutyl acetal, hexanal glyceryl acetal and 4-methyl-2-pentanone propyleneglycol acetal. As no genotoxicity study data were available in the literature, all five substances had no chemical structural alerts predicting genotoxicity. Using Cramer's classification, acetoin dimethyl acetal and hexanal dibutyl acetal were categorised as class I, and acetaldehyde 2,3-butanediol acetal, hexanal glyceryl acetal and 4-methyl-2-pentanone propyleneglycol acetal as class III. The estimated daily intakes for all five substances were within the range of 1.45-6.53 µg/person/day using the method of maximised survey-derived intake based on the annual production data in Japan from 2001, 2005, 2008 and 2010, and 156-720 µg/person/day using the single-portion exposure technique (SPET), based on the average use levels in standard portion sizes of flavoured foods. The daily intakes of the two class I substances were below the threshold of toxicological concern (TTC) - 1800 μg/person/day. The daily intakes of the three class III substances exceeded the TTC (90 μg/person/day). Two of these, acetaldehyde 2,3-butanediol acetal and hexanal glyceryl acetal, were expected to be metabolised into endogenous products after ingestion. For 4-methyl-2-pentanone propyleneglycol acetal, one of its metabolites was not expected to be metabolised into endogenous products. However, its daily intake level, based on the estimated intake calculated by the SPET method, was about 1/15 000th of the no observed effect level. It was thus concluded that all five substances raised no safety concerns when used for flavouring foods at the currently estimated intake levels. While no information on in vitro and in vivo toxicity for all five substances was available, their metabolites were judged as raising no safety concerns at the current levels of intake.

The rapid bi-level exploration on the evolution of regional solar energy development

NASA Astrophysics Data System (ADS)

Guan, Qing; An, Haizhong; Li, Huajiao; Hao, Xiaoqing

2017-01-01

As one of the renewable energy, solar energy is experiencing increased but exploratory development worldwide. The positive or negative influences of regional characteristics, like economy, production capacity and allowance policies, make them have uneven solar energy development. In this paper, we aim at quickly exploring the features of provincial solar energy development, and their concerns about solar energy. We take China as a typical case, and combine text mining and two-actor networks. We find that the classification of levels based on certain nodes and the amount of degree avoids missing meaningful information that may be ignored by global level results. Moreover, eastern provinces are hot focus for the media, western countries are key to bridge the networks and special administrative region has local development features; third, most focus points are more about the application than the improvement of material. The exploration of news provides practical information to adjust researches and development strategies of solar energy. Moreover, the bi-level exploration, which can also be expanded to multi-level, is helpful for governments or researchers to grasp more targeted and precise knowledge.

The Socialization of Teachers: Career Rewards and Levels of Professional Concern.

ERIC Educational Resources Information Center

Driscoll, Amy

Teacher education, when viewed along a professional continuum from preservice level to beginning level to experienced level, involves a socialization phenomenon which is only minimally described or understood by the profession. Several aspects of the socialization process--career rewards, levels of professional concern, and perceptions of the…

Operational Considerations for Oxygen Flammability Risks: Concentrated Oxygen Diffusion and Permeation Behaviors

NASA Technical Reports Server (NTRS)

Harper, Susana; Smith, Sarah; Juarez, Alfredo; Hirsch, David

2010-01-01

Increased human spaceflight operations utilize oxygen concentrations that are frequently varied with use of concentrations up to 100 percent oxygen. Even after exiting a higher percentage oxygen environment, high oxygen concentrations can still be maintained due to material saturation and oxygen entrapment between barrier materials. This paper examines the material flammability concerns that arise from changing oxygen environments during spaceflight operations. We examine the time required for common spacecraft and spacesuit materials exposed to oxygen to return to reduced ignitability and flammability once removed from the increased concentration. Various common spacecraft materials were considered: spacecraft cabin environment foams, Extra Vehicular Mobility Unit materials and foams, Advanced Crew Escape Suit materials, and other materials of interest such as Cotton, Nomex^ HT90-40, and Tiburon Surgical Drape. This paper presents calculated diffusion coefficients derived from experimentally obtained oxygen transmission rates for the tested materials and the analytically derived times necessary for reduced flammability to be achieved based on NASA flammability criteria. Oxygen material saturation and entrapment scenarios are examined. Experimental verification data on oxygen diffusion in saturation scenarios are also presented and discussed. We examine how to use obtained data to address flammability concerns during operational planning to reduce the likelihood of fires while improving efficiency for procedures.

Diffusion-controlled reference material for VOC emissions testing: proof of concept.

PubMed

Cox, S S; Liu, Z; Little, J C; Howard-Reed, C; Nabinger, S J; Persily, A

2010-10-01

Because of concerns about indoor air quality, there is growing awareness of the need to reduce the rate at which indoor materials and products emit volatile organic compounds (VOCs). To meet consumer demand for low emitting products, manufacturers are increasingly submitting materials to independent laboratories for emissions testing. However, the same product tested by different laboratories can result in very different emissions profiles because of a general lack of test validation procedures. There is a need for a reference material that can be used as a known emissions source and that will have the same emission rate when tested by different laboratories under the same conditions. A reference material was created by loading toluene into a polymethyl pentene film. A fundamental emissions model was used to predict the toluene emissions profile. Measured VOC emissions profiles using small-chamber emissions tests compared reasonably well to the emissions profile predicted using the emissions model, demonstrating the feasibility of the proposed approach to create a diffusion-controlled reference material. To calibrate emissions test chambers and improve the reproducibility of VOC emission measurements among different laboratories, a reference material has been created using a polymer film loaded with a representative VOC. Initial results show that the film's VOC emission profile measured in a conventional test chamber compares well to predictions based on independently determined material/chemical properties and a fundamental emissions model. The use of such reference materials has the potential to build consensus and confidence in emissions testing as well as 'level the playing field' for product testing laboratories and manufacturers.

Aviation medicine translations : annotated bibliography of recently translated material, X.

DOT National Transportation Integrated Search

1981-01-01

An annotated bibliography of translations of foreign-language articles is presented. Of the 86 listed entries, 53 are concerned with studies of shift work, and 10 are concerned with studies of alcohol. : The remaining entries can be subsumed under th...

Teachers Guide.

ERIC Educational Resources Information Center

Linsky, Ronald B.; Schnitger, Ronald L.

This guide provides teachers with copies of the materials given to students participating in the oceanography program of the Orange County Floating Laboratory Program and provides information concerning colleges and universities offering courses in oceanography and marine science, source of films, and sources of publications concerning the Navy's…

Pain is the Greatest Preoperative Concern for Patients and Parents Before Posterior Spinal Fusion for Adolescent Idiopathic Scoliosis.

PubMed

Chan, Priscella; Skaggs, David L; Sanders, Austin E; Villamor, Gabriela A; Choi, Paul D; Tolo, Vernon T; Andras, Lindsay M

2017-11-01

Prospective cross-sectional study. To evaluate patients' and parents' concerns so they can be addressed with appropriate preoperative counseling. Despite much research on outcomes for posterior spinal fusion (PSF) in adolescent idiopathic scoliosis (AIS), little is available about preoperative fears or concerns. Patients with AIS undergoing PSF, their parents, and surgeons were prospectively enrolled and asked to complete a survey on their fears and concerns about surgery at their preoperative appointment. Forty-eight patients and parents completed surveys. Four attending pediatric spine surgeons participated and submitted 48 responses. Mean age of patients was 14.2 years. On a scale of 0 to 10, mean level of concern reported by parents (6.9) was higher than that reported by patients (4.6). Surgeons rated the procedure's complexity on a scale of 0 to 10 and reported a mean of 5.2. Neither patients' nor parents' level of concern correlated with the surgeons' assessment of the procedure's complexity level (R = 0.19 and 0.12, P = 0.20 and P = 0.42, respectively). Top three concerns for patients were pain (25%), ability to return to activities (21%), and neurologic injury (17%). Top three concerns for parents were pain (35%), neurologic injury (21%), and amount of correction (17%). Top three concerns for surgeons were postoperative shoulder balance (44%), neurologic injury (27%), and lowest instrumented vertebrae selection (27%). Patients reported the same concerns 23% of the time as parents, and 17% of the time as surgeons. Parents and surgeons reported the same concerns 21% of the time. Pain was the greatest concern for both patients and parents but was rarely listed as a concern by surgeons. Parent and patient level of concern did not correlate to the surgeon's assessment of the procedure's complexity. Neurologic injury was a top concern for all groups, but otherwise there was little overlap between physician, patient, and parent concerns. 3.

Interdisciplinary research concerning the nature and properties of ceramic materials

NASA Technical Reports Server (NTRS)

1975-01-01

The nature and properties of ceramic materials as they relate to solid state physics and metallurgy are studied. Special attention was given to the applications of ceramics to NASA programs and national needs.

Health care facility-based decontamination of victims exposed to chemical, biological, and radiological materials.

PubMed

Koenig, Kristi L; Boatright, Connie J; Hancock, John A; Denny, Frank J; Teeter, David S; Kahn, Christopher A; Schultz, Carl H

2008-01-01

Since the US terrorist attacks of September 11, 2001, concern regarding use of chemical, biological, or radiological weapons is heightened. Many victims of such an attack would present directly to health care facilities without first undergoing field decontamination. This article reviews basic tenets and recommendations for health care facility-based decontamination, including regulatory concerns, types of contaminants, comprehensive decontamination procedures (including crowd control, triage, removal of contaminated garments, cleaning of body contaminants, and management of contaminated materials and equipment), and a discussion of methods to achieve preparedness.

Mining in subarctic Canada: airborne PM2.5 metal concentrations in two remote First Nations communities.

PubMed

Liberda, Eric N; Tsuji, Leonard J S; Peltier, Richard E

2015-11-01

Airborne particulate matter arising from upwind mining activities is a concern for First Nations communities in the western James Bay region of Ontario, Canada. Aerosol chemical components were collected in 2011 from two communities in northern Ontario. The chemical and mass concentration data of particulate matter collected during this study shows a significant difference in PM2.5 in Attawapiskat compared to Fort Albany. Elemental profiles indicate enhanced levels of some tracers thought to arise from mining activities, such as, K, Ni, and crustal materials. Both communities are remote and isolated from urban and industrial pollution sources, however, Attawapiskat First Nation has significantly enhanced levels of particulate matter, and it is likely that some of this arises from upwind mining activities. Copyright © 2015 Elsevier Ltd. All rights reserved.

Health assessment for Lake Sandy Jo Landfill, Gary, Indiana, Region 5. CERCLIS No. IND980500524. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-11-21

The 50-acre Lake Sandy Jo Landfill is located in the Black Oak community (predominantly residential) of southwestern Gary in Lake County, Indiana. From about 1971 until about 1980, the lake was filled in with construction and demolition debris, municipal garbage, industrial wastes, hazardous materials, and possibly drummed wastes. These wastes are partly to completely exposed on the landfill surface. Surface soil, subsurface soil, surface water, sediment, and ground water show a variety of metal and organic chemical carcinogens. Toxic noncarcinogen priority pollutants found were chloromethane, copper, cyanide, lead, mercury, and silver. Inorganic soil levels found on the site for leadmore » and cadmium exceed levels of concern that would permit unrestricted use of the site. Remedial measures would be necessary before the site could be granted unrestricted use.« less

The sun since the Bronze Age

NASA Technical Reports Server (NTRS)

Eddy, J. A.

1976-01-01

An investigation is conducted concerning the behavior of the sun during the last 7000 years. The C-14 content in carbonaceous fossil material can be used as an indicator regarding the level of solar activity at the time when the carbon was assimilated in the process of photosynthesis. Living trees, such as the bristlecone pine, provide a solar activity record to about 3000 B.C. The record can be extended with the aid of well-preserved dead wood to beyond 5000 B.C. The results of an analysis of solar activity levels as a function of time on the basis of C-14 contents are presented in a graph. Attention is given to the Maunder Minimum, a history of the sun in the last 5000 years, an interpretation of the major C-14 excursions, and the sun and climate history.

Laboratory Assessment of Potential Impacts to Dungeness Crabs from Disposal of Dredged Material from the Columbia River

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vavrinec, John; Pearson, Walter H.; Kohn, Nancy P.

2007-05-07

Dredging of the Columbia River navigation channel has raised concerns about dredging-related impacts on Dungeness crabs (Cancer magister) in the estuary, mouth of the estuary, and nearshore ocean areas adjacent to the Columbia River. The Portland District, U.S. Army Corps of Engineers engaged the Marine Sciences Laboratory (MSL) of the U.S. Department of Energy’s Pacific Northwest National Laboratory to review the state of knowledge and conduct studies concerning impacts on Dungeness crabs resulting from disposal during the Columbia River Channel Improvement Project and annual maintenance dredging in the mouth of the Columbia River. The present study concerns potential effects onmore » Dungeness crabs from dredged material disposal specific to the mouth of the Columbia River.« less

A Cohort Study of the Patterns of Third Molar Impaction in Panoramic Radiographs in Saudi Population

PubMed Central

Al-Dajani, Mahmoud; Abouonq, Anas O; Almohammadi, Turki A; Alruwaili, Mohammed K; Alswilem, Rayan O; Alzoubi, Ibrahim A

2017-01-01

Objectives: To evaluate the epidemiological patterns of third molar impaction in a cohort of patients living in the north of Saudi Arabia. Materials and Methods: A retrospective cohort study comprised of analysing 2550 Orthopantomograms (OPGs) belonging to patients who attended Aljouf University College of Dentistry between September 2013 and December 2015. OPGs were examined to determine the frequency of third molar impaction, their levels of eruption and angulations. Mixed effects logistic regression analysis was performed to calculate adjusted odds ratios. Data were weighted by age and sex based on population regional estimates. Results: 1551 patients (60.8%) with a mean age of 33.5 years-old (95%CI: 32.9 to 34) demonstrated 2650 impacted third molars. Third molars were more likely present in patients aged from 20 to 39 years-old (p<0.001); and in mandible more than maxilla (p<0.001). It showed highest vertical impaction and higher impaction rate in mandible than maxilla. Level A impaction was the most common among other levels by 1365 (53.5%). Vertical impaction was the most common pattern (1354 patients; 53.1%). Mesioangular impaction ranked second in mandible, while distoangular impaction ranked second in maxilla. There was no statistically significant difference between males and females concerning impaction frequency, depth levels and angulations. Conclusion: Impacted third molars is still a public health concern among youth and young adults. Vertically impacted mandibular third molars with their occlusal plane at the same level as the occlusal plane of adjacent tooth is the most prevalent pattern of third molar impaction in the northern region of Saudi Arabia. PMID:29387281

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Ames Laboratory conducts fundamental research in the physical, chemical, materials, and mathematical sciences and engineering which underlie energy generating, conversion, transmission and storage technologies, environmental improvement, and other technical areas essential to national needs. These efforts will be maintained so as to contribute to the achievement of the vision of DOE and, more specifically, to increase the general levels of knowledge and technical capabilities, to prepare engineering and physical sciences students for the future, both academia and industry, and to develop new technologies and practical applications from our basic scientific programs that will contribute to a strengthening of themore » US economy. The Laboratory approaches all its operations with the safety and health of all workers as a constant objective and with genuine concern for the environment. The Laboratory relies upon its strengths in materials synthesis and processing, materials reliability, chemical analysis, chemical sciences, photosynthesis, materials sciences, metallurgy, high-temperature superconductivity, and applied mathematical sciences to conduct the long term basic and intermediate range applied research needed to solve the complex problems encountered in energy production, and utilization as well as environmental restoration and waste management. Ames Laboratory will continue to maintain a very significant and highly beneficial pre-college math and science education program which currently serves both teachers and students at the middle school and high school levels. Our technology transfer program is aided by joint efforts with ISU`s technology development and commercialization enterprise and will sustain concerted efforts to implement Cooperative Research and Development Agreements, industrially sponsored Work for Others projects. and scientific personnel exchanges with our various customers.« less

A common-sense approach to asbestos in roofing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinmetz, W.R. Jr.

The word asbestos carries an ominous connotation to many plant engineers and building owners. Many are caught up in the hype surrounding asbestos abatement. Others are confused about how to face the questions surrounding this mysterious, dangerous, and often misunderstood substance. Asbestos issues cast a particularly perplexing spell over decisions about how to deal with the material in the removal of roofing systems. The product is an excellent roofing choice because it is fire-resistant, durable, and nonrotting. And most significantly on the other hand, asbestos causes three deadly diseases: lung cancer, asbestosis, and mesothelioma (cancer of the lung lining andmore » always fatal). This danger prompted enactment of the Asbestos Hazard Emergency Response Act (AHERA) in the early 1980s. The regulation required every K-12 school in the US to develop a management plant for dealing with asbestos. Since then, much has been done to raise awareness of the issues surrounding this material. The standard`s earliest form based removal requirements primarily on exposure levels. A 1994 revision, however, extended stringent removal requirements to all roof removal work involving asbestos, regardless of exposure level. This paper looks at the regulations, concerns, considerations, and procedures for dealing with the problem.« less

History of Sulphur Content Effects on the Thermal Stability of RP-1 under Heated Conditions

NASA Technical Reports Server (NTRS)

Irvine, Solveig A.; Schoettmer, Amanda K.; Bates, Ronald W.; Meyer, Michael L.

2004-01-01

As technologies advance in the aerospace industry, a strong desire has emerged to design more efficient, longer life, reusable liquid hydrocarbon fueled rocket engines. To achieve this goal, a more complete understanding of the thermal stability and chemical makeup of the hydrocarbon propellant is needed. Since the main fuel used in modern liquid hydrocarbon systems is RP-1, there is concern that Standard Grade RP-1 may not be a suitable propellant for future-generation rocket engines due to concern over the outdated Mil-Specification for the fuel. This current specification allows high valued limits on contaminants such as sulfur compounds, and also lacks specification of required thermal stability qualifications for the fuel. Previous studies have highlighted the detrimental effect of high levels of mercaptan sulfur content (^50 ppm) on copper rocket engine materials, but the fuel itself has not been studied. While the role of sulfur in other fuels (e.g., aviation, diesel, and automotive fuels) has been extensively studied, little has been reported on the effects of sulfur levels in rocket fuels. Lower RP-1 sulfur concentrations need to be evaluated and an acceptable sulfur limit established before RP-1 can be recommended for use as the propellant for future launch vehicles. (5 tables, 8 figures, 9 refs.)

The influence of social networks on patients' attitudes toward type II diabetes.

PubMed

Mani, Nandini; Caiola, Enrico; Fortuna, Robert J

2011-10-01

Social networks are increasingly recognized as important determinants of many chronic diseases, yet little data exist regarding the influence of social networks on diabetes. We surveyed diabetic patients to determine how social networks affect their overall level of concern regarding diabetes and its complications. We adapted a previously published instrument and surveyed 240 diabetic patients at two primary care practices. Patients recorded the number of family and friends who had diabetes and rated their level of concern about diabetes on a scale of 0% (no concern) to 100% (extremely concerned). Our primary outcome variable was patients' level of concern (<75% or ≥75%). We developed logistic regression models to determine the effect of disease burden in patients' social networks on expressed level of concern about diabetes. We received 154 surveys (64% response rate). We found that for each additional family member with diabetes, patients expressed a greater level of concern about diabetes (AOR 1.5; 95% CI 1.2-2.0) and its potential complications (AOR 1.4; 95% CI 1.1-1.7). Similarly, patients with an increased number of friends with diabetes expressed greater concern about diabetes (AOR 1.5; 95% CI 1.2-1.9) and its complications (AOR 1.3; 95% CI 1.1-1.7). Patients with a higher prevalence of diabetes within their social networks expressed greater concern about diabetes and diabetic complications. Determining disease burden within patients' social networks may allow physicians to better understand patients' perspectives on their disease and ultimately help them achieve meaningful behavioral change.

Hope, connectedness, and action: responses of adolescents and young adults to the threat of nuclear war

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernald, M.C.

This study undertook to assess the degree to which a person's sense of interconnectedness with others may have a mediating effect on whether one reacts to the consciousness of nuclear threat with feelings of despair (helplessness and hopelessness) or with a sense of empowerment (hope, efficacy, and action for change). Subjects included 119 public high school students and 14 Friends' school students, ranging from 12-18 years of age; 58 university students ranging from 18-25 years of age; and 24 parents of public school students, 10 adult Friends, and 38 members of Physicians for Social Responsibility, ranging from 20-83 years ofmore » age. A self-rating questionnaire was administered to assess subjects' conscious level of concern about nuclear issues, feelings of connectedness with others in general and about nuclear concerns, feelings of hope and efficacy in general and with regard to nuclear issues, and participation in activities reflecting concerns about nuclear threat. Correlational analyses (multiple regression, Spearman Rho, Kendall's Tau) showed that general feelings of hope, level of activity, and feelings of connectedness about nuclear concerns were the best predictors of hope about nuclear concerns. Conscious level of concern and feelings of connectedness about nuclear concerns, along with age and SES were the best predictors of an active response to nuclear threat; additionally, parents' level of concern about nuclear issues was predictive of their children's degree of activity in response to nuclear threat. Adolescents' level of concern and degree of connectedness with others was predicted by their parents' degree of connectedness.« less

Environmental Assessment of Packaging: The Consumer Point of View

PubMed

Van Dam YK

1996-09-01

When marketing environmentally responsible packaged products, the producer is confronted with consumer beliefs concerning the environmental friendliness of packaging materials. When making environmentally conscious packaging decisions, these consumer beliefs should be taken into account alongside the technical guidelines. Dutch consumer perceptions of the environmental friendliness of packaged products are reported and compared with the results of a life-cycle analysis assessment. It is shown that consumers judge environmental friendliness mainly from material and returnability. Furthermore, the consumer perception of the environmental friendliness of packaging material is based on the postconsumption waste, whereas the environmental effects of production are ignored. From the consumer beliefs concerning environmental friendliness implications are deduced for packaging policy and for environmental policy.KEY WORDS: Consumer behavior; Environment; Food; Packaging; Perception; Waste

Using carbonized low-cost materials for removal of chemicals of environmental concern from water.

PubMed

Weidemann, Eva; Niinipuu, Mirva; Fick, Jerker; Jansson, Stina

2018-06-01

Adsorption on low-cost biochars would increase the affordability and availability of water treatment in, for example, developing countries. The aim of this study was to identify the precursor materials and hydrochar surface properties that yield efficient removal of compounds of environmental concern (CEC). We determined the adsorption kinetics of a mixture containing ten CECs (octhilinone, triclosan, trimethoprim, sulfamethoxasole, ciprofloxacin, diclofenac, paracetamol, diphenhydramine, fluconazole, and bisphenol A) to hydrochars prepared from agricultural waste (including tomato- and olive-press wastes, rice husks, and horse manure). The surface characteristics of the hydrochars were evaluated via diffuse reflectance infrared spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and N 2 -adsorption. Kinetic adsorption tests revealed that removal efficiencies varied substantially among different materials. Similarly, surface analysis revealed differences among the studied hydrochars and the degree of changes that the materials undergo during carbonization. According to the DRIFTS data, compared with the least efficient adsorbent materials, the most efficient hydrochars underwent more substantial changes during carbonization.

28 CFR 16.206 - Transcripts, minutes, and miscellaneous documents concerning Commission meetings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Transcripts, minutes, and miscellaneous documents concerning Commission meetings. 16.206 Section 16.206 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION Public Observation of Parole Commission...

Additional Material Related to Child Care Legislation.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Finance.

Material relating to Child Care Legislation is provided. The material concerns the following: (1) Provisions of H.R. 1 relating to child care: Opportunities for families program; Family assistance plan; (2) Excerpts from House report on H.R. 1 relating to child care: Provision of child care by Department of Labor; Exclusion of child care expenses…

Time Step Considerations when Simulating Dynamic Behavior of High Performance Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tabares-Velasco, Paulo Cesar

2016-09-01

Building energy simulations, especially those concerning pre-cooling strategies and cooling/heating peak demand management, require careful analysis and detailed understanding of building characteristics. Accurate modeling of the building thermal response and material properties for thermally massive walls or advanced materials like phase change materials (PCMs) are critically important.

A status review of NASA's COSAM (Conservation Of Strategic Aerospace Materials) program

NASA Technical Reports Server (NTRS)

Stephens, J. R.

1982-01-01

The use and supply of strategic elements in nickel base superalloys for gas turbine engines are reviewed. Substitution of strategic elements, advanced processing concepts, and the identification of alternate materials are considered. Cobalt, tantalum, columbium, and chromium, the supplies of which are 91-100% imported, are the materials of major concern.

77 FR 33624 - Extension of Import Restrictions Imposed on Archaeological and Ethnological Materials From Peru

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-07

... and Ethnological Materials From Peru AGENCY: U.S. Customs and Border Protection, Department of... archaeological and ethnological material from Peru. The restrictions, which were originally imposed by Treasury... with the Republic of Peru on June 9, 1997, concerning the imposition of import restrictions on pre...

10 CFR 40.56 - Restrictions on the use of Australian-obligated source material.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Restrictions on the use of Australian-obligated source material. 40.56 Section 40.56 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF SOURCE MATERIAL... United States of America Concerning Peaceful Uses of Nuclear Energy, dated 2010, Australian-obligated...

10 CFR 40.56 - Restrictions on the use of Australian-obligated source material.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Restrictions on the use of Australian-obligated source material. 40.56 Section 40.56 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF SOURCE MATERIAL... United States of America Concerning Peaceful Uses of Nuclear Energy, dated 2010, Australian-obligated...

10 CFR 40.56 - Restrictions on the use of Australian-obligated source material.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Restrictions on the use of Australian-obligated source material. 40.56 Section 40.56 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF SOURCE MATERIAL... United States of America Concerning Peaceful Uses of Nuclear Energy, dated 2010, Australian-obligated...

The Teaching Materials System in Japan.

ERIC Educational Resources Information Center

Shimizu, Atsumi

An overview is given of the state of teaching materials and aids used in schools in Japan. In section I, an outline is presented of the Japanese system of providing teaching materials. Several laws and regulations regarding the provision and use of textbooks are described, including: (1) school education law; (2) law concerning the organization…

Costs, Substitution, and Material Use: The Case of Rare Earth Magnets.

PubMed

Smith, Braeton J; Eggert, Roderick G

2018-03-20

Environmental technologies depend on raw materials, some of which are subject to volatile costs and availability concerns. One way to address these concerns is through substitution, of which there are many types. An important form of substitution in the short term is adopting an alternative production process, yielding a material with the same functional properties with less material input. In effect, technology substitutes for material. This study elucidates the role increased and uncertain material costs play in inducing different substitution types in the short to medium term. Specifically, this paper uses an expert survey to determine the relative importance of eight specific industry responses taken by magnet and wind turbine manufacturers in response to the 2010/2011 rare-earth price spike through 2016. Statistical tests show adopting an existing production process for magnets was the most important response, followed by cost passthrough, using an alternate magnet grade in a redesigned generator system, and using alternate systems altogether. The paper also provides specific findings for the magnet and wind turbine industries with respect to each substitution type.

Estimation and assessment of Mars contamination.

PubMed

Debus, A

2005-01-01

Since the beginning of the exploration of Mars, more than fourty years ago, thirty-six missions have been launched, including fifty-nine different space systems such as fly-by spacecraft, orbiters, cruise modules, landing or penetrating systems. Taking into account failures at launch, about three missions out of four have been successfully sent toward the Red Planet. The fact today is that Mars orbital environment includes orbiters and perhaps debris, and that its atmosphere and its surface include terrestrial compounds and dormant microorganisms. Coming from the UN Outer Space Treaty [United Nations Treaty on Principles Governing the Activities of States in the Exploration and Use of Outer Space, including the Moon and Other Celestial Bodies (the "Outer Space Treaty") referenced 610 UNTS 205 - resolution 2222(XXI) of December 1966] and according to the COSPAR planetary protection policy recommendations [COSPAR Planetary Protection Policy (20 October 2002), accepted by the Council and Bureau, as moved for adoption by SC F and PPP, prepared by the COSPAR/IAU Workshop on Planetary Protection, 4/02 with updates 10/0, 2002], Mars environment has to be preserved so as not to jeopardize the scientific investigations, and the level of terrestrial material brought on and around Mars theoretically has to comply with this policy. It is useful to evaluate what and how many materials, compounds and microorganisms are on Mars, to list what is in orbit and to identify where all these items are. Considering assumptions about materials, spores and gas location and dispersion on Mars, average contamination levels can be estimated. It is clear now that as long as missions are sent to other extraterrestrial bodies, it is not possible to keep them perfectly clean. Mars is one of the most concerned body, and the large number of missions achieved, on-going and planned now raise the question about its possible contamination, not necessarily from a biological point of view, but with respect to all types of contamination. Answering this question, will help to assess the potential effects of such contamination on scientific results and will address concerns relative to any ethical considerations about the contamination of other planets. c2005 COSPAR. Published by Elsevier Ltd. All rights reserved.

Multilayer Insulation Material Guidelines

NASA Technical Reports Server (NTRS)

Finckenor, M. M.; Dooling, D.

1999-01-01

Multilayer Insulation Material Guidelines provides data on multilayer insulation materials used by previous spacecraft such as Spacelab and the Long-Duration Exposure Facility and outlines other concerns. The data presented in the document are presented for information only. They can be used as guidelines for multilayer insulation design for future spacecraft provided the thermal requirements of each new design and the environmental effects on these materials are taken into account.

Mitigation measures to avert the impacts of plastics and microplastics in the marine environment (a review).

PubMed

Ogunola, Oluniyi Solomon; Onada, Olawale Ahmed; Falaye, Augustine Eyiwunmi

2018-04-01

The increasing demand for and reliance on plastics as an everyday item, and rapid rise in their production and subsequent indiscriminate disposal, rise in human population and industrial growth, have made the material an important environmental concern and focus of interest of many research. Historically, plastic production has increased tremendously to over 250 million tonnes by 2009 with an annual increased rate of 9%. In 2015, the global consumption of plastic materials was reported to be > 300 million tonnes and is expected to surge exponentially. Because plastic polymers are ubiquitous, highly resistant to degradation, the influx of these persistent, complex materials is a risk to human and environmental health. Because microplastics are principally generated from the weathering or breakdown of larger plastics (macroplastics), it is noteworthy and expedient to discuss in detail, expatiate, and tackle this main source. Macro- and microplastic pollution has been reported on a global scale from the poles to the equator. The major problem of concern is that they strangulate and are ingested by a number of aquatic biota especially the filter feeders, such as molluscs, mussels, oysters, from where it enters the food chain and consequently could lead to physical and toxicological effects on aquatic organisms and human being as final consumers. To this end, in order to minimise the negative impacts posed by plastic pollution (macro- and microplastics), a plethora of strategies have been developed at various levels to reduce and manage the plastic wastes. The objective of this paper is to review some published literature on management measures of plastic wastes to curb occurrence and incidents of large- and microplastics pollution in the marine environments.

Concern as motivation for protection: an investigation of mothers' concern about daughters' breast cancer risk.

PubMed

Neuberger, Lindsay; Silk, Kami J; Yun, Doshik; Bowman, Nicholas David; Anderson, Jennifer

2011-11-01

The present study surveyed mothers with daughters (N = 386) to investigate how mothers' concern about their daughters' breast cancer risk influenced intentions to engage in preventive behaviors. Using protection motivation theory as a framework, self-efficacy, response efficacy, and level of concern were posited to influence protective behavioral intention in distinct ways. Results from regression analyses indicate that self-efficacy, response efficacy, and mothers' concern are significant predictors of intentions to engage in preventive behaviors with daughters. In addition, a content analysis of mothers' open-ended reasons for their concern about their daughters' breast cancer risk yield a list of specific concerns and trends that vary by concern level and individual comment valence. The authors discuss implications for incorporating mothers' concerns into breast cancer prevention messages as a novel strategy for campaign designers.

Concern as Motivation for Protection: An Investigation of Mothers’ Concern About Daughters’ Breast Cancer Risk

PubMed Central

NEUBERGER, LINDSAY; SILK, KAMI J.; YUN, DOSHIK; BOWMAN, NICHOLAS DAVID; ANDERSON, JENNIFER

2012-01-01

The current study surveyed mothers with daughters (N=386) to investigate how mothers’ concern about their daughters’ breast cancer risk influenced intentions to engage in preventive behaviors. Using Protection Motivation Theory as a framework, self-efficacy, response efficacy and level of concern were posited to influence protective behavioral intention in distinct ways. Results from regression analyses indicate that self-efficacy, response efficacy, and mothers’ concern are significant predictors of intentions to engage in preventive behaviors with daughters. Additionally, a content analysis of mothers’ open-ended reasons for their concern about their daughters’ breast cancer risk yield a list of specific concerns as well as trends that vary by concern level and individual comment valence. Implications for incorporating mothers’ concerns into breast cancer prevention messages are discussed as a novel strategy for campaign designers. PMID:22070448

Integrating Computational Chemistry into the Physical Chemistry Curriculum

ERIC Educational Resources Information Center

Johnson, Lewis E.; Engel, Thomas

2011-01-01

Relatively few undergraduate physical chemistry programs integrate molecular modeling into their quantum mechanics curriculum owing to concerns about limited access to computational facilities, the cost of software, and concerns about increasing the course material. However, modeling exercises can be integrated into an undergraduate course at a…

19 CFR 207.46 - Investigations concerning certain countervailing duty orders.

Code of Federal Regulations, 2011 CFR

2011-04-01

... NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS OF WHETHER INJURY TO DOMESTIC INDUSTRIES RESULTS FROM IMPORTS SOLD... like product, the industry in the United States producing that product that is likely to be materially... member of that industry. (2) Information reasonably available to the requesting party concerning the...

Introductory Curriculum Materials, Project SCATE.

ERIC Educational Resources Information Center

Iowa State Dept. of Public Instruction, Des Moines. Div. of Curriculum.

The objective of Project SCATE (Students Concerned About Tomorrow's Environment) is for students to investigate environmental problems and the political processes involved in their solution. The four identified areas of concern are: (1) land use policy development; (2) air and water quality; (3) energy allocation and consumption; and (4) economic…

Sampling and Analysis of Nanomaterials in the Environment: A State-of-Science Review

EPA Science Inventory

EPA is concerned with new and emerging contaminants. The Agency needs to understand long-term health and environmental effects of materials and communicate exposure, risks and benefits appropriately to the public. Among EPA’s concerns are the various commercially manufactured nan...

Recycling and reuse of chosen kinds of waste materials in a building industry

NASA Astrophysics Data System (ADS)

Ferek, B.; Harasymiuk, J.; Tyburski, J.

2016-08-01

The article describes the current state of knowledge and practice in Poland concerning recycling as a method of reuse of chosen groups of waste materials in building industry. The recycling of building scraps is imposed by environmental, economic and technological premises. The issue of usage of sewage residues is becoming a problem of ever -growing gravity as the presence of the increasing number of pernicious contaminants makes their utilization for agricultural purposes more and more limited. The strategies of using waste materials on Polish building sites were analyzed. The analysis of predispositions to salvage for a group of traditional materials, such as: timber, steel, building debris, insulation materials, plastics, and on the example of new materials, such as: artificial light aggregates made by appropriate mixing of siliceous aggregates, glass refuses and sewage residues in order to obtain a commodity which is apt for economic usage also was made in the article. The issue of recycling of waste materials originating from building operations will be presented in the context of the binding home and EU legal regulations. It was proved that the level of recycling of building wastes in Poland is considerably different from one which is achieved in the solid market economies, both in quantity and in assortment. The method of neutralization of building refuses in connection with special waste materials, which are sewage sludge that is presented in the article may be one of the alternative solutions to the problem of recycling of these wastes not only on the Polish scale.

Biodegradable and compostable alternatives to conventional plastics.

PubMed

Song, J H; Murphy, R J; Narayan, R; Davies, G B H

2009-07-27

Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. Among other materials, a wide range of oil-based polymers is currently used in packaging applications. These are virtually all non-biodegradable, and some are difficult to recycle or reuse due to being complex composites having varying levels of contamination. Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality to that of oil-based polymers. The expansion in these bio-based materials has several potential benefits for greenhouse gas balances and other environmental impacts over whole life cycles and in the use of renewable, rather than finite resources. It is intended that use of biodegradable materials will contribute to sustainability and reduction in the environmental impact associated with disposal of oil-based polymers. The diversity of biodegradable materials and their varying properties makes it difficult to make simple, generic assessments such as biodegradable products are all 'good' or petrochemical-based products are all 'bad'. This paper discusses the potential impacts of biodegradable packaging materials and their waste management, particularly via composting. It presents the key issues that inform judgements of the benefits these materials have in relation to conventional, petrochemical-based counterparts. Specific examples are given from new research on biodegradability in simulated 'home' composting systems. It is the view of the authors that biodegradable packaging materials are most suitable for single-use disposable applications where the post-consumer waste can be locally composted.

The developmental origins of moral concern: An examination of moral boundary decision making throughout childhood

PubMed Central

Wilks, Matti; Redshaw, Jonathan; Nielsen, Mark

2018-01-01

Prominent theorists have made the argument that modern humans express moral concern for a greater number of entities than at any other time in our past. Moreover, adults show stable patterns in the degrees of concern they afford certain entities over others, yet it remains unknown when and how these patterns of moral decision-making manifest in development. Children aged 4 to 10 years (N = 151) placed 24 pictures of human, animal, and environmental entities on a stratified circle representing three levels of moral concern. Although younger and older children expressed similar overall levels of moral concern, older children demonstrated a more graded understanding of concern by including more entities within the outer reaches of their moral circles (i.e., they were less likely to view moral inclusion as a simple in vs. out binary decision). With age children extended greater concern to humans than other forms of life, and more concern to vulnerable groups, such as the sick and disabled. Notably, children’s level of concern for human entities predicted their prosocial behavior. The current research provides novel insights into the development of our moral reasoning and its structure within childhood. PMID:29813134

The developmental origins of moral concern: An examination of moral boundary decision making throughout childhood.

PubMed

Neldner, Karri; Crimston, Daniel; Wilks, Matti; Redshaw, Jonathan; Nielsen, Mark

2018-01-01

Prominent theorists have made the argument that modern humans express moral concern for a greater number of entities than at any other time in our past. Moreover, adults show stable patterns in the degrees of concern they afford certain entities over others, yet it remains unknown when and how these patterns of moral decision-making manifest in development. Children aged 4 to 10 years (N = 151) placed 24 pictures of human, animal, and environmental entities on a stratified circle representing three levels of moral concern. Although younger and older children expressed similar overall levels of moral concern, older children demonstrated a more graded understanding of concern by including more entities within the outer reaches of their moral circles (i.e., they were less likely to view moral inclusion as a simple in vs. out binary decision). With age children extended greater concern to humans than other forms of life, and more concern to vulnerable groups, such as the sick and disabled. Notably, children's level of concern for human entities predicted their prosocial behavior. The current research provides novel insights into the development of our moral reasoning and its structure within childhood.

The relevance of globalization to nursing: a concept analysis.

PubMed

Grootjans, J; Newman, S

2013-03-01

This paper emerged alongside the development of learning materials for a new unit of study on global health and nursing. The proposed unit was for inclusion in a graduate entry master of nursing course leading to registration. It became evident that there has been growing attention within the nursing literature to the demands of an increasingly globalized world and the subsequent challenges confronting nursing as a profession. At the same time, the literature is inconsistent and contains mixed messages with regard to how nurses and nursing might respond to these challenges. This paper aims to (i) present the findings of a narrative analysis of the current nursing discourse on globalization, and (ii) to identify directional cohesiveness for the nursing profession in the seemingly disparate literature. Concept analysis following extensive literature review. Several nursing authors argue that nurses globally are increasingly sharing concerns expressed by nurses at a local level. Concerns such as the future sustainability of the profession and more specifically practice concerns such as the continuing failure of nurses to adequately deal with social justice issues requires careful consideration by every nurse. While strategies recommended for dealing with these concerns lack a cohesive thread, some interesting themes and innovative recommendations have emerged. For example, the need for nurses to consider replacing environmental considerations with ecological considerations and that nurses consider preventative nursing practice beyond the immediate needs of clients and from a more global perspective. © 2012 The Authors. International Nursing Review © 2012 International Council of Nurses.

EPA's Program for Asbestos Containing Materials in School Buildings.

ERIC Educational Resources Information Center

Johnson, Kirk A.

1979-01-01

Comments from the Environmental Protection Agency (EPA) concerning three recommendations (in an article in a previous issue of this journal about inspecting schools for asbestos-containing materials) that are in direct conflict with those offered by EPA. (MLF)

Dimensional Stability of Grout-Type Materials Used as Connections for Prefabricated Bridge Elements

DOT National Transportation Integrated Search

2016-05-01

The research presented in this report focuses on addressing performance concerns related to dimensional stability (primarily early age shrinkage) of 11 commercially available grout-type materials. Some of these grouts, especially those classified as ...

Wood handbook : wood as an engineering material.

Treesearch

Forest Products Laboratory

1999-01-01

Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

Wood handbook : wood as an engineering material

Treesearch

Robert J. Ross; Forest Products Laboratory USDA Forest Service.

2010-01-01

Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

The Influence of Acculturation on Environmental Concerns: An Exploratory Study.

ERIC Educational Resources Information Center

Caro, Victor; Ewert, Alan

1995-01-01

Focuses on the effect levels of acculturation on responses to a selected group of environmental issues. A scale of environmental concerns was administered to forest visitors in two southern California forests. Level of acculturation accounted for most of the observed variation in environmental concern. Findings suggest looking beyond ethnicity and…

A comparison of literature-based and content-based guided reading materials on elementary student reading and science achievement

NASA Astrophysics Data System (ADS)

Guns, Christine

Guided reading, as developed by Fountas and Pinnell (2001), has been a staple of elementary reading programs for the past decade. Teachers in the elementary school setting utilize this small group, tailored instruction in order to differentiate and meet the instructional needs of the students. The literature shows academic benefit for students who have special needs, such as learning disabilities, autism, and hearing impairments but consideration of academic impact has not been investigated for regular education students. The purpose of this quasi-experimental study was to investigate the academic impact of the use of content-related (Group C) and the traditional literature-based (Group L) reading materials. During the Living Systems and Life Processes unit in science, two teachers self-selected to utilized science-related materials for guided reading instruction while the other three teacher participants utilized their normal literature-based guided reading materials. The two groups were compared using an ANCOVA in this pre-test/post-test design. The dependent variables included the Reading for Application and Instruction assessment (RAI) and a Living Systems and Life Processes assessment (LSA). Further analysis compared students of different reading levels and gender. The data analyses revealed a practical but not statistical significance for students in science performance. It was discovered that below level male and female students performed better on the LSA when provided with content-related guided reading materials. As far as reading achievement is concerned, students in both groups had comparable results. The teachers provided guided reading instruction to their students with fidelity and made adjustments to their practices due to the needs of their students. The content-related teachers utilized a larger number of expository texts than the literature-based teachers. These teachers expressed the desire to continue the practice of providing the students with content-related materials.

C-reactive protein levels: a prognostic marker for patients with head and neck cancer?

PubMed Central

2010-01-01

Background Recent advances in understanding complex tumor interactions have led to the discovery of an association between inflammation and cancer, in particular for colon and lung cancer, but only a very few have dealt with oral cancer. Therefore, the aim of the current study was to investigate the significance of preoperative C-reactive protein (CRP) levels as a parameter for development of lymph node metastases or recurrence. Materials and methods In 278 patients with oral cancer, preoperative CRP levels were compared with development of recurrence and metastasis. Results In 27 patients from the normal CRP group, and in 21 patients from the elevated CRP group, local recurrence was observed. Concerning lymph node metastases, 37 patients were in the normal group and 9 patients in the elevated CRP group. No significant correlation could be found between elevated CRP levels and metastasis (p = 0.468) or recurrence (p = 0.137). Conclusion Our findings do not appear to support a correlation between preoperative CRP levels and development of recurrence or metastases. In further studies, CRP levels in precancerous lesions and in Human Papilloma Virus (HPV) positive patients with oral squamous cell carcinoma (SCC) should be studied. PMID:20673375

Computation of Material Demand in the Risk Assessment and Mitigation Framework for Strategic Materials (RAMF-SM) Process

DTIC Science & Technology

2015-08-01

Congress concerning requirements for the National Defense Stockpile (NDS) of strategic and critical non- fuel materials. 1 RAMF-SM, which was...critical non- fuel materials. The NDS was established in the World War II era and has been managed by the Department of Defense (DOD) since 1988. By...Department of the Interior. An alternative algorithm is used for materials with intensive defense demands. v Contents 1 .  Introduction

Strategy for the management of substance use disorders in the State of Punjab: Developing a structural model of state-level de-addiction services in the health sector (the “Punjab model”)

PubMed Central

Basu, Debasish; Avasthi, Ajit

2015-01-01

Background: Substance use disorders are believed to have become rampant in the State of Punjab, causing substantive loss to the person, the family, the society, and the state. The situation is likely to worsen further if a structured, government-level, state-wide de-addiction service is not put into place. Aims: The aim was to describe a comprehensive structural model of de-addiction service in the State of Punjab (the “Pyramid model” or “Punjab model”), which is primarily concerned with demand reduction, particularly that part which is concerned with identification, treatment, and aftercare of substance users. Materials and Methods: At the behest of the Punjab Government, this model was developed by the authors after a detailed study of the current scenario, critical and exhaustive look at the existing guidelines, policies, books, web resources, government documents, and the like in this area, a check of the ground reality in terms of existing infrastructural and manpower resources, and keeping pragmatism and practicability in mind. Several rounds of meetings with the government officials and other important stakeholders helped to refine the model further. Results: Our model envisages structural innovation and renovations within the existing state healthcare infrastructure. We formulated a “Pyramid model,” later renamed as “Punjab model,” where there is a broad community base for early identification and outpatient level treatment at the primary care level, both outpatient and inpatient care at the secondary care level, and comprehensive management for more difficult cases at the tertiary care level. A separate de-addiction system for the prisons was also developed. Each of these structural elements was described and refined in details, with the aim of uniform, standardized, and easily accessible care across the state. Conclusions: If the “Punjab model” succeeds, it can provide useful models for other states or even at the national level. PMID:25657452

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alviso, C; Harvey, C; Vance, A

Removable epoxy foam (REF) is a novel material developed by researchers at Sandia National Laboratories to simplify the removal of encapsulants from electronic components [McElhanon, et al., Journal of Applied Polymer Science, 2002, 85, 1496-1502]. The material is based on a resin that includes a thermally reversible chemical bond. When the material is heated at relatively mild temperatures ({approx}50-90 C) in the presence of appropriate solvents, the reversible bonds are broken, and the material is easily rinsed away. In order to ease the removal of the encapsulant for surveillance purposes, it was proposed to use REF in the W80 LEPmore » in place of the polyurethane TDI (toluene diisocyanate), which is being phased out at the Kansas City Plant due to toxicity concerns. Colleagues at Sandia noted that REF exhibited especially high outgassing of the liquid fluorinert, FC-72, which is used at a level of 5 wt% as the blowing agent in the foaming process. After obtaining a sample of the material from Sandia, headspace solid phase microextraction gas chromatography-mass spectrometry (SPME GC/MS) measurements were performed. These measurements revealed significant outgassing of fluorinert as well as other solvents and siloxanes [Memo, Vance, 3/3/05 & Vance, Foam PRT presentation UCRL-PRES-212462]. This report is intended to summarize foam outgassing studies performed at LLNL in support of the W80 LEP.« less

ENGLEWOOD PUBLIC SCHOOLS ELEMENTARY READING GUIDE.

ERIC Educational Resources Information Center

TROUT, JOHN; AND OTHERS

THE READING GUIDE OF THE ENGLEWOOD PUBLIC SCHOOLS, NEW JERSEY, EMPHASIZES INDIVIDUALIZED INSTRUCTION. TEACHERS ARE URGED TO BE LESS CONCERNED WITH TEXTBOOK MATERIAL AND MORE CONCERNED WITH PUPIL ABILITY. THE FOLLOWING THREE PREMISES GUIDE THE READING PROGRAM--(1) GRADE PLACEMENTS ARE NO LONGER AN ADEQUATE BASIS FOR STRUCTURING THE READING PROGRAM.…

14 CFR 189.3 - Kinds of messages accepted or relayed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... operating schedules; (iii) Concerning the servicing of aircraft en route or scheduled to depart within 48... en route or about to depart, if the changes are caused by unavoidable deviations from normal... by aircraft en route or about to depart; (vi) Concerning parts or materials urgently needed to...

14 CFR 189.3 - Kinds of messages accepted or relayed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... operating schedules; (iii) Concerning the servicing of aircraft en route or scheduled to depart within 48... en route or about to depart, if the changes are caused by unavoidable deviations from normal... by aircraft en route or about to depart; (vi) Concerning parts or materials urgently needed to...

14 CFR 189.3 - Kinds of messages accepted or relayed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... operating schedules; (iii) Concerning the servicing of aircraft en route or scheduled to depart within 48... en route or about to depart, if the changes are caused by unavoidable deviations from normal... by aircraft en route or about to depart; (vi) Concerning parts or materials urgently needed to...

Physical Chemistry: Developing a Dynamic Curriculum.

ERIC Educational Resources Information Center

Schwenz, Richard W., Ed.; Moore, Robert J., Ed.

Many teachers and other educators have expressed a concern regarding the lack of student interest in many of the traditional science courses. Concerns have also been expressed by teachers of their dissatisfaction with much of the lecture material and the laboratory exercises in some science classes. To help rectify this problem a collaborative…

32 CFR 724.224 - Court-martial specifications, presumption concerning.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 5 2011-07-01 2011-07-01 false Court-martial specifications, presumption...-martial specifications, presumption concerning. (a) Relevant and material facts stated in a court-martial... dismissal adjudged by a court-martial case tried under the Uniform Code of Military Justice, the action may...

32 CFR 724.224 - Court-martial specifications, presumption concerning.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 5 2012-07-01 2012-07-01 false Court-martial specifications, presumption...-martial specifications, presumption concerning. (a) Relevant and material facts stated in a court-martial... dismissal adjudged by a court-martial case tried under the Uniform Code of Military Justice, the action may...

32 CFR 724.224 - Court-martial specifications, presumption concerning.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 5 2014-07-01 2014-07-01 false Court-martial specifications, presumption...-martial specifications, presumption concerning. (a) Relevant and material facts stated in a court-martial... dismissal adjudged by a court-martial case tried under the Uniform Code of Military Justice, the action may...

32 CFR 724.224 - Court-martial specifications, presumption concerning.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 5 2013-07-01 2013-07-01 false Court-martial specifications, presumption...-martial specifications, presumption concerning. (a) Relevant and material facts stated in a court-martial... dismissal adjudged by a court-martial case tried under the Uniform Code of Military Justice, the action may...

32 CFR 724.224 - Court-martial specifications, presumption concerning.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Court-martial specifications, presumption...-martial specifications, presumption concerning. (a) Relevant and material facts stated in a court-martial... dismissal adjudged by a court-martial case tried under the Uniform Code of Military Justice, the action may...

Evaluation of Career Education Projects, 1976-1977. Report #7829.

ERIC Educational Resources Information Center

Chern, Hermine J.; And Others

Evaluations of thirty career education projects in the school district of Philadelphia, Pennsylvania are contained in this report. Fifteen of the projects concern classroom or shop instruction, six concern development and/or field testing of curriculum materials, and the remainder involve staff development, installation of shop equipment, job…

10 CFR Appendix I to Part 73 - Category 1 and 2 Radioactive Materials

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Category 1 and 2 Radioactive Materials I Appendix I to.... 73, App. I Appendix I to Part 73—Category 1 and 2 Radioactive Materials Table I-1—Quantities of Concern Threshold Limits Radionuclides Category 1 Terabecquerels(TBq) Curies(Ci) 1 Category 2...

10 CFR Appendix I to Part 73 - Category 1 and 2 Radioactive Materials

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Category 1 and 2 Radioactive Materials I Appendix I to.... 73, App. I Appendix I to Part 73—Category 1 and 2 Radioactive Materials Table I-1—Quantities of Concern Threshold Limits Radionuclides Category 1 Terabecquerels(TBq) Curies(Ci) 1 Category 2...

The Status of the Testing Effect for Complex Materials: Still a Winner

ERIC Educational Resources Information Center

Rawson, Katherine A.

2015-01-01

The target articles in the special issue address a timely and important question concerning whether practice tests enhance learning of complex materials. The consensus conclusion from these articles is that the testing effect does not obtain for complex materials. In this commentary, I discuss why this conclusion is not warranted either by the…

Fire performance of fiber board coated with nano kaolin-clay film

Treesearch

Zhijia Liu; John F. Hunt; Zhiyong Cai

2013-01-01

Fiberboard is a common interior material used both in China and the United States of America. The increase in demand for interior materials has raised concerns regarding combustibility of the materials. The pyrolysis characteristics of fiber, phenolic resin (PF), and nano kaolin-clay (NK) were investigated using thermogravimetry. The fire performances of samples coated...

Reflections on Visual and Material Culture: An Example from Southwest Chicago

ERIC Educational Resources Information Center

Ulbricht, J.

2007-01-01

Although several art educators have called our attention to the importance of studying visual culture, others have widened the discussion to include material culture and its effects on our lives. Because of growing concern for the value of exploring the personal and social functions of visual and material culture, the purpose of this article is to…

Helping Elementary Preservice Teachers Learn to Use Curriculum Materials for Effective Science Teaching

ERIC Educational Resources Information Center

Schwarz, Christina V.; Gunckel, Kristin L.; Smith, Ed L.; Covitt, Beth A.; Bae, Minjung; Enfield, Mark; Tsurusaki, Blakely K.

2008-01-01

Curriculum analysis, modification, and enactment are core components of teacher practice. Beginning teachers rely heavily on curriculum materials that are often of poor quality to guide their practice. As a result, we argue that preservice teachers need to learn how to use curriculum materials for effective teaching. To address this concern, the…

Choosing Materials that Do the Job. The ACTFL Foreign Language Education Series, Vol. 10.

ERIC Educational Resources Information Center

Johnson, Carl H.

The importance of text materials in foreign language classrooms is a crucial issue and choosing a textbook and supplementary materials becomes a major area of concern for every foreign language teacher. While factors both external and internal to the school narrow the possibility of choice, several points must be considered in the selection…

Framework for Reducing Teaching Challenges Relating to Improvisation of Science Education Equipment and Materials in Schools

ERIC Educational Resources Information Center

Akuma, Fru Vitalis; Callaghan, Ronel

2016-01-01

The science education budget of many secondary schools has decreased, while shortages and environmental concerns linked to conventional Science Education Equipment and Materials (SEEMs) have emerged. Thus, in some schools, resourceful educators produce low-cost equipment from basic materials and use these so-called improvised SEEMs in practical…

Cone calorimeter tests of wood-based decking materials

Treesearch

Robert H. White; Mark A. Dietenberger; Nicole M. Stark

2007-01-01

New technologies in building materials have resulted in the use of a wide variety of materials in decks. As part of our effort to address fire concerns in the wildland-urban interface, the Forest Products Laboratory has been examining the fire performance of decking products. In addition to preservative-treated wood, decking products include wood-plastic composites and...

Effects of three biodiesels and a low sulfur diesel in male rats--a pilot 4-week oral study.

PubMed

Poon, R; Chu, I; Valli, V E; Graham, L; Yagminas, A; Hollebone, B; Rideout, G; Fingas, M

2007-10-01

Because of the accessible and renewable nature of feedstock and the potential for the reduction of harmful combustion emissions and greenhouse gases, biodiesels have received increasing interest as an alternate fuel. Oral exposure to biodiesels is a concern because of contact during refuelling, accidental ingestion and exposure through ground water contamination. Although biodiesels from various feedstock are in use commercially and experimentally, very little is known about their potential adverse effects and no data is available on their potential for ground water contamination. A study was performed on male rats following oral treatment with experimental biodiesels (dissolved in corn oil) derived from canola oil (Bio-C), soy oil (Bio-S) and fish oil (Bio-F), at 500 mg/kg body weight/day, 5 days per week, for 4 weeks. Separate groups of animals were treated with low sulfur diesel (LSD) for comparison purpose, and with corn oil alone to serve as control. The potential for ground water contamination by biodiesels was investigated by the preparation of water-accommodated fractions (WAF) followed by gas chromatographic analysis. WAF from Bio-F and Bio-S was found to have the highest level of dichloromethane extractable materials. Gas chromatographic analysis indicated that the extractable materials from biodiesels contained much higher proportion of C15-C30 materials than LSD. Increased liver weight was observed in animal treated with Bio-C, Bio-S and LSD and decreased thymus weight was found in those treated with Bio-S. Histopathological changes typical of male-rat specific hyaline-droplet nephropathy were detected in kidney tubules of animals treated with LSD, Bio-S and Bio-C. Mild adaptive changes were observed in thyroids of animals treated with LSD, Bio-S and Bio-F. Clinical chemical and biochemical changes were confined to Bio-S and LSD treated rats and included elevation in some hepatic phase-I and phase-II drug metabolizing enzymes and hepatic palmitoyl Co-A oxidase, and elevated urinary concentrations of ascorbic acid and albumin. At the given dose level of 500 mg/kg bw/day, the overall treatment-related effects of biodiesels and LSD are mild, and the severity of the treatment effects may be ranked as: LSD>Bio-S>Bio-C>Bio-F. Considered together with the presence of a higher level of water extractable materials, Bio-S may be more of a concern for potential human health than Bio-C and Bio-F in an oral exposure scenario. Further studies are needed to identify and characterize the constituents contributing to the treatment-related effects specific to these experimental biodiesels.

Materials Research for Advanced Inertial Instrumentation. Task 1. Dimensional Stability of Gyro Structural Materials

DTIC Science & Technology

1980-06-01

instrument. The most common sources of such dimensional instability in instruments are: phase trans- formation, relief of resiiual stress, and microplastic ...the stress or by increasing the resistance of the material to microplastic deformation. Section 3 of this report is concerned with an investigation of...hot isostatically pressed (HIP) beryllium as a material with potentially greater resistance to microplastic deformation than the grades of beryllium

Modified lithium vanadium oxide electrode materials products and methods

DOEpatents

Thackeray, Michael M.; Kahaian, Arthur J.; Visser, Donald R.; Dees, Dennis W.; Benedek, Roy

1999-12-21

A method of improving certain vanadium oxide formulations is presented. The method concerns fluorine doping formulations having a nominal formula of LiV.sub.3 O.sub.8. Preferred average formulations are provided wherein the average oxidation state of the vanadium is at least 4.6. Herein preferred fluorine doped vanadium oxide materials, electrodes using such materials, and batteries including at least one electrode therein comprising such materials are provided.

Enhancing blood donation intentions using multimedia donor education materials.

PubMed

France, Christopher R; France, Janis L; Wissel, Mary Ellen; Kowalsky, Jennifer M; Bolinger, Elizabeth M; Huckins, Jamie L

2011-08-01

Prior research has shown that education materials that directly address prospective donor concerns and provide specific coping suggestions are particularly effective at enhancing donation attitudes and intentions to give blood. This study compared the effect of donor coping materials, provided in written and audiovisual formats, as potential tools to enhance recruitment of prospective blood donors. The role of initial attitudes toward blood donation on responses to these materials was also considered. Young adults (62% female; mean [SD] age=19.1 [1.4]; mean [range] prior blood donations=1.32 [0-13]) were randomly assigned to 1) read a brochure addressing common blood donor concerns and suggesting specific coping strategies, 2) view a video addressing blood donor concerns and illustrating coping techniques, 3) read the brochure and view the video, or 4) read a control brochure on healthy eating and exercise. Measures of blood donation attitudes, anxiety, confidence, and intentions to give blood were completed before and after the intervention. Relative to the control brochure, all the intervention groups showed larger reductions in anxiety, more positive changes in attitude, and greater increases in donation confidence and intentions. The combination of the brochure and video outperformed either intervention alone in further improving donation attitudes among participants with high initial donation attitudes. Blood donation coping materials, presented in either written or audiovisual formats, significantly enhance willingness to donate blood among young adults regardless of their initial attitudes toward blood donation. © 2011 American Association of Blood Banks.

Guide for Hydrogen Hazards Analysis on Components and Systems

NASA Technical Reports Server (NTRS)

Beeson, Harold; Woods, Stephen

2003-01-01

The physical and combustion properties of hydrogen give rise to hazards that must be considered when designing and operating a hydrogen system. One of the major concerns in the use of hydrogen is that of fire or detonation because of hydrogen's wide flammability range, low ignition energy, and flame speed. Other concerns include the contact and interaction of hydrogen with materials, such as the hydrogen embrittlement of materials and the formation of hydrogen hydrides. The low temperature of liquid and slush hydrogen bring other concerns related to material compatibility and pressure control; this is especially important when dissimilar, adjoining materials are involved. The potential hazards arising from these properties and design features necessitate a proper hydrogen hazards analysis before introducing a material, component, or system into hydrogen service. The objective of this guide is to describe the NASA Johnson Space Center White Sands Test Facility hydrogen hazards analysis method that should be performed before hydrogen is used in components and/or systems. The method is consistent with standard practices for analyzing hazards. It is recommended that this analysis be made before implementing a hydrogen component qualification procedure. A hydrogen hazards analysis is a useful tool for hydrogen-system designers, system and safety engineers, and facility managers. A hydrogen hazards analysis can identify problem areas before hydrogen is introduced into a system-preventing damage to hardware, delay or loss of mission or objective, and possible injury or loss of life.

Tensile behaviour of geopolymer-based materials under medium and high strain rates

NASA Astrophysics Data System (ADS)

Menna, Costantino; Asprone, Domenico; Forni, Daniele; Roviello, Giuseppina; Ricciotti, Laura; Ferone, Claudio; Bozza, Anna; Prota, Andrea; Cadoni, Ezio

2015-09-01

Geopolymers are a promising class of inorganic materials typically obtained from an alluminosilicate source and an alkaline solution, and characterized by an amorphous 3-D framework structure. These materials are particularly attractive for the construction industry due to mechanical and environmental advantages they exhibit compared to conventional systems. Indeed, geopolymer-based concretes represent a challenge for the large scale uses of such a binder material and many research studies currently focus on this topic. However, the behaviour of geopolymers under high dynamic loads is rarely investigated, even though it is of a fundamental concern for the integrity/vulnerability assessment under extreme dynamic events. The present study aims to investigate the effect of high dynamic loading conditions on the tensile behaviour of different geopolymer formulations. The dynamic tests were performed under different strain rates by using a Hydro-pneumatic machine and a modified Hopkinson bar at the DynaMat laboratory of the University of Applied Sciences of Southern Switzerland. The results are processed in terms of stress-strain relationships and strength dynamic increase factor at different strain-rate levels. The dynamic increase factor was also compared with CEB recommendations. The experimental outcomes can be used to assess the constitutive laws of geopolymers under dynamic load conditions and implemented into analytical models.

Bioactivity of freeze-dried platelet-rich plasma in an adsorbed form on a biodegradable polymer material.

PubMed

Nakajima, Yu; Kawase, Tomoyuki; Kobayashi, Mito; Okuda, Kazuhiro; Wolff, Larry F; Yoshie, Hiromasa

2012-01-01

Owing to the necessity for the immediate preparation from patients' blood, autologous platelet-rich plasma (PRP) limits its clinical applicability. To address this concern and respond to emergency care and other unpredictable uses, we have developed a freeze-dried PRP in an adsorbed form on a biodegradable polymer material (Polyglactin 910). On the polymer filaments of PRP mesh, which was prepared by coating the polymer mesh with human fresh PRP and subsequent freeze-drying, platelets were incorporated, and related growth factors were preserved at high levels. This new PRP mesh preparation significantly and reproducibly stimulated the proliferation of human periodontal ligament cells in vitro and neovascularization in a chorioallantoic membrane assay. A full-thickness skin defect model in a diabetic mouse demonstrated the PRP mesh, although prepared from human blood, substantially facilitated angiogenesis, granulation tissue formation, and re-epithelialization without inducing severe inflammation in vivo. These data demonstrate that our new PRP mesh preparation functions as a bioactive material to facilitate tissue repair/regeneration. Therefore, we suggest that this bioactive material, composed of allogeneic PRP, could be clinically used as a promising alternative in emergency care or at times when autologous PRP is not prepared immediately before application.

Characterization of Emissions from Open Burning of Meals ...

EPA Pesticide Factsheets

Emissions from burning current and candidate Meals Ready-to-Eat (MRE) packaging and shipping containers were characterized in an effort to assuage concerns that combustive disposal of waste at forward operating bases could pose an environmental or inhalation threat. Four types of container materials, both box and liners, including the currently used fiberboard, new corrugated fiberboard with Spektrakote polymer, new fiberboard without Spektrakote polymer, and the current fiberboard without wet strength were burned in an open burn test facility that simulated the burn pit disposal methods in Iraq and Afghanistan. MREs, including both current and proposed packaging materials, were added to a single container type to examine their effect on emissions. One quarter of the food was left in the packaging to represent unused meal components. The proposed packaging, consisting of a nano-composite polymer, was added in 25 % increments compared to traditional MRE packaging to create a range of usage levels. Emission factors, mass of pollutant per mass of burned material, were increased over the emission factors of the package containers themselves by the addition of the multi-component MREs, with the exception of Volatile Organic Compounds (VOCs). In general, little distinction was observed when comparing emission factors from the four container materials and when comparing the four MRE compositions. The majority of Particulate Matter (PM) emissions were of particles that

Interpretation biases in paranoia.

PubMed

Savulich, George; Freeman, Daniel; Shergill, Sukhi; Yiend, Jenny

2015-01-01

Information in the environment is frequently ambiguous in meaning. Emotional ambiguity, such as the stare of a stranger, or the scream of a child, encompasses possible good or bad emotional consequences. Those with elevated vulnerability to affective disorders tend to interpret such material more negatively than those without, a phenomenon known as "negative interpretation bias." In this study we examined the relationship between vulnerability to psychosis, measured by trait paranoia, and interpretation bias. One set of material permitted broadly positive/negative (valenced) interpretations, while another allowed more or less paranoid interpretations, allowing us to also investigate the content specificity of interpretation biases associated with paranoia. Regression analyses (n=70) revealed that trait paranoia, trait anxiety, and cognitive inflexibility predicted paranoid interpretation bias, whereas trait anxiety and cognitive inflexibility predicted negative interpretation bias. In a group comparison those with high levels of trait paranoia were negatively biased in their interpretations of ambiguous information relative to those with low trait paranoia, and this effect was most pronounced for material directly related to paranoid concerns. Together these data suggest that a negative interpretation bias occurs in those with elevated vulnerability to paranoia, and that this bias may be strongest for material matching paranoid beliefs. We conclude that content-specific biases may be important in the cause and maintenance of paranoid symptoms. Copyright © 2014. Published by Elsevier Ltd.

Mishap risk control for advanced aerospace/composite materials

NASA Technical Reports Server (NTRS)

Olson, John M.

1994-01-01

Although advanced aerospace materials and advanced composites provide outstanding performance, they also present several unique post-mishap environmental, safety, and health concerns. The purpose of this paper is to provide information on some of the unique hazards and concerns associated with these materials when damaged by fire, explosion, or high-energy impact. Additionally, recommended procedures and precautions are addressed as they pertain to all phases of a composite aircraft mishap response, including fire-fighting, investigation, recovery, clean-up, and guidelines are general in nature and not application-specific. The goal of this project is to provide factual and realistic information which can be used to develop consistent and effective procedures and policies to minimize the potential environmental, safety, and health impacts of a composite aircraft mishap response effort.

Social Identification as a Determinant of Concerns about Individual-, Group-, and Inclusive-Level Justice

ERIC Educational Resources Information Center

Wenzel, Michael

2004-01-01

Extending concepts of micro- and macrojustice, three levels of justice are distinguished. Individual-, group-, and inclusive-level justice are defined in terms of the target of justice concerns: one's individual treatment, one's group's treatment, and the distribution in the collective (e.g., nation). Individual-level justice permits a more…

Optimal investment for enhancing social concern about biodiversity conservation: a dynamic approach.

PubMed

Lee, Joung Hun; Iwasa, Yoh

2012-11-01

To maintain biodiversity conservation areas, we need to invest in activities, such as monitoring the condition of the ecosystem, preventing illegal exploitation, and removing harmful alien species. These require a constant supply of resources, the level of which is determined by the concern of the society about biodiversity conservation. In this paper, we study the optimal fraction of the resources to invest in activities for enhancing the social concern y(t) by environmental education, museum displays, publications, and media exposure. We search for the strategy that maximizes the time-integral of the quality of the conservation area x(t) with temporal discounting. Analyses based on dynamic programming and Pontryagin's maximum principle show that the optimal control consists of two phases: (1) in the first phase, the social concern level approaches to the final optimal value y(∗), (2) in the second phase, resources are allocated to both activities, and the social concern level is kept constant y(t) = y(∗). If the social concern starts from a low initial level, the optimal path includes a period in which the quality of the conservation area declines temporarily, because all the resources are invested to enhance the social concern. When the support rate increases with the quality of the conservation area itself x(t) as well as with the level of social concern y(t), both variables may increase simultaneously in the second phase. We discuss the implication of the results to good management of biodiversity conservation areas. 2012 Elsevier Inc. All rights reserved

Health, safety and environmental requirements for composite materials

NASA Technical Reports Server (NTRS)

Hazer, Kathleen A.

1994-01-01

The health, safety and environmental requirements for the production of composite materials are discussed. The areas covered include: (1) chemical identification for each chemical; (2) toxicology; (3) industrial hygiene; (4) fire and safety; (5) environmental aspects; and (6) medical concerns.

Copyright Survey Results.

ERIC Educational Resources Information Center

Botterbusch, Hope R.

1992-01-01

Reports results of a survey of copyright concerns that was conducted by the Association for Educational Communications and Technology. Areas addressed include video and television; copyright legislation; printed materials; music; audiovisual materials; and computer software. A checklist of proper copyright procedures is included. (six references)…

How Sensitive Is the Elasticity of Hydroxyapatite-Nanoparticle-Reinforced Chitosan Composite to Changes in Particle Concentration and Crystallization Temperature?

PubMed

Wang, Kean; Liao, Kin; Goh, Kheng Lim

2015-10-10

Hydroxyapatite (HA) nanoparticle-reinforced chitosan composites are biocompatible and biodegradable structural materials that are used as biomaterials in tissue engineering. However, in order for these materials to function effectively as intended, e.g., to provide adequate structural support for repairing damaged tissues, it is necessary to analyse and optimise the material processing parameters that affect the relevant mechanical properties. Here we are concerned with the strength, stiffness and toughness of wet-spun HA-reinforced chitosan fibres. Unlike previous studies which have addressed each of these parameters as singly applied treatments, we have carried out an experiment designed using a two-factor analysis of variance to study the main effects of two key material processing parameters, namely HA concentration and crystallization temperature, and their interactions on the respective mechanical properties of the composite fibres. The analysis reveals that significant interaction occurs between the crystallization temperature and HA concentration. Starting at a low HA concentration level, the magnitude of the respective mechanical properties decreases significantly with increasing HA concentration until a critical HA concentration is reached, at around 0.20-0.30 (HA mass fraction), beyond which the magnitude of the mechanical properties increases significantly with HA concentration. The sensitivity of the mechanical properties to crystallization temperature is masked by the interaction between the two parameters-further analysis reveals that the dependence on crystallization temperature is significant in at least some levels of HA concentration. The magnitude of the mechanical properties of the chitosan composite fibre corresponding to 40 °C is higher than that at 100 °C at low HA concentration; the reverse applies at high HA concentration. In conclusion, the elasticity of the HA nanoparticle-reinforced chitosan composite fibre is sensitive to HA concentration and crystallization temperature, and there exists a critical concentration level whereby the magnitude of the mechanical property is a minimum.

Porous materials for thermal management under extreme conditions.

PubMed

Clyne, T W; Golosnoy, I O; Tan, J C; Markaki, A E

2006-01-15

A brief analysis is presented of how heat transfer takes place in porous materials of various types. The emphasis is on materials able to withstand extremes of temperature, gas pressure, irradiation, etc. i.e. metals and ceramics, rather than polymers. A primary aim is commonly to maximize either the thermal resistance (i.e. provide insulation) or the rate of thermal equilibration between the material and a fluid passing through it (i.e. to facilitate heat exchange). The main structural characteristics concern porosity (void content), anisotropy, pore connectivity and scale. The effect of scale is complex, since the permeability decreases as the structure is refined, but the interfacial area for fluid-solid heat exchange is, thereby, raised. The durability of the pore structure may also be an issue, with a possible disadvantage of finer scale structures being poor microstructural stability under service conditions. Finally, good mechanical properties may be required, since the development of thermal gradients, high fluid fluxes, etc. can generate substantial levels of stress. There are, thus, some complex interplays between service conditions, pore architecture/scale, fluid permeation characteristics, convective heat flow, thermal conduction and radiative heat transfer. Such interplays are illustrated with reference to three examples: (i) a thermal barrier coating in a gas turbine engine; (ii) a Space Shuttle tile; and (iii) a Stirling engine heat exchanger. Highly porous, permeable materials are often made by bonding fibres together into a network structure and much of the analysis presented here is oriented towards such materials.

Study of the time varying properties of flax fiber reinforced composites

NASA Astrophysics Data System (ADS)

Stochioiu, Constantin; Chettah, Ameur; Piezel, Benoit; Fontaine, Stéphane; Gheorghiu, Horia-Miron

2018-02-01

Bio materials have seen an increase of interest from the scientific community and the industry as a possible future generation of mass produced materials, some of the main arguments being their renewability, low production costs and recyclability. The current work is focused on the experimental data required for the viscoelastic characterization of a composite material. Similar work has been conducted on different types of composite materials by Tuttle and Brinson [1] who verified for a carbon epoxy laminate the possibility of long term predicament of creep. Nordin et al [2] studied paper impregnated with phenol-formaldehyde under compression. Muliana [3] conducted experiments on E-glass/vinyl ester materials. Behavior characterization was based on a model presented by Schapery [4]. The main objective of this work is to understand the mechanical behaviors of bio-laminates structures subjected to long and severe operating conditions. The studied material is a bio composite laminate consisting in long flax fibers embedded in an epoxy resin system. The laminates were obtained from pre-impregnated unidirectional fibers, which were cured though a thermo-compression cycle followed by a post curing cycle. Test specimens were cut down to sizes, with the help of an electric saw. The concerned fiber direction was 0° with sample dimensions of 250x25x2 mm. First, testing consisted in quasi static mechanical tests. Second, to characterize linear viscoelastic behavior of the bio-laminates, creep - recovery tests with multiple load levels have been performed for the chosen fiber direction.

Radiation Detection at Borders for Homeland Security

NASA Astrophysics Data System (ADS)

Kouzes, Richard

2004-05-01

Countries around the world are deploying radiation detection instrumentation to interdict the illegal shipment of radioactive material crossing international borders at land, rail, air, and sea ports of entry. These efforts include deployments in the US and a number of European and Asian countries by governments and international agencies. Items of concern include radiation dispersal devices (RDD), nuclear warheads, and special nuclear material (SNM). Radiation portal monitors (RPMs) are used as the main screening tool for vehicles and cargo at borders, supplemented by handheld detectors, personal radiation detectors, and x-ray imaging systems. Some cargo contains naturally occurring radioactive material (NORM) that triggers "nuisance" alarms in RPMs at these border crossings. Individuals treated with medical radiopharmaceuticals also produce nuisance alarms and can produce cross-talk between adjacent lanes of a multi-lane deployment. The operational impact of nuisance alarms can be significant at border crossings. Methods have been developed for reducing this impact without negatively affecting the requirements for interdiction of radioactive materials of interest. Plastic scintillator material is commonly used in RPMs for the detection of gamma rays from radioactive material, primarily due to the efficiency per unit cost compared to other detection materials. The resolution and lack of full-energy peaks in the plastic scintillator material prohibits detailed spectroscopy. However, the limited spectroscopic information from plastic scintillator can be exploited to provide some discrimination. Energy-based algorithms used in RPMs can effectively exploit the crude energy information available from a plastic scintillator to distinguish some NORM. Whenever NORM cargo limits the level of the alarm threshold, energy-based algorithms produce significantly better detection probabilities for small SNM sources than gross-count algorithms. This presentation discusses experience with RPMs for interdiction of radioactive materials at borders.

Asian public concern over the ethics of scientists: predictors and implications for research ethics.

PubMed

Smolak, Alex; Gorroochurn, Prakash; Kamarulzaman, Adeeba; Janjua, Nazli

2012-01-01

The following two research questions were examined in this study: 1) What is the public's level of concern with ethics in science; and 2) Are religious affiliation, religious involvement, and education predictors of that concern in Asia? The sample includes 7,963 men and women between the ages of 20 and 59 from ten Asian countries. An overall low level of relative concern toward ethics in science was reported. Lower educational attainment was associated with lower odds of concern. Christian religious affiliation and moderate religious involvement were also associated with lower odds of concern. This article highlights the importance of more active research into social perspectives on ethics in science.

Radiologic safety assessment for low level waste storage on TRU pads

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, J.P.

1986-03-17

The reference document (TA 2-1118) proposes to store Low Level Radioactive Solid Waste in B-25 boxes on concrete pads at the 643-G burial ground site, pending resolution of policy concernig its ultimate disposal. This analysis verifies that the reference proposal is safe, as long as it is applied to a limited material quantity of low specific activity, as described in the reference document. The predominant concern in the safety analysis is the emission of airborne activity as a result of tornados and fires. However, containment provided by B-25 boxes is sufficient to mitigate the consequences of these events sufficiently. Nevertheless,more » it is strongly recommended that any above-ground storage procedures include provisions for covering the waste containment boxes to prevent exposure to rainwater and subsequent corrosion if the storage period is to extend beyond one year.« less

Modelling of magnetostriction of transformer magnetic core for vibration analysis

NASA Astrophysics Data System (ADS)

Marks, Janis; Vitolina, Sandra

2017-12-01

Magnetostriction is a phenomenon occurring in transformer core in normal operation mode. Yet in time, it can cause the delamination of magnetic core resulting in higher level of vibrations that are measured on the surface of transformer tank during diagnostic tests. The aim of this paper is to create a model for evaluating elastic deformations in magnetic core that can be used for power transformers with intensive vibrations in order to eliminate magnetostriction as a their cause. Description of the developed model in Matlab and COMSOL software is provided including restrictions concerning geometry and properties of materials, and the results of performed research on magnetic core anisotropy are provided. As a case study modelling of magnetostriction for 5-legged 200 MVA power transformer with the rated voltage of 13.8/137kV is conducted, based on which comparative analysis of vibration levels and elastic deformations is performed.

Research on dental implant and its industrialization stage

NASA Astrophysics Data System (ADS)

Dongjoon, Yang; Sukyoung, Kim

2017-02-01

Bone cell attachment to Ti implant surfaces is the most concerned issue in the clinical implant dentistry. Many attempts to achieve the fast and strong integration between bone and implant have been tried in many ways, such as selection of materials (for example, Ti, ZrO2), shape design of implant (for example, soft tissue level, bone level, taped or conical, etc), and surface modification of implants (for example, roughed. coated, hybrid), etc. Among them, a major consideration is the surface design of dental implants. The surface with proper structural characteristics promotes or induces the desirable responses of cells and tissues. To obtain such surface which has desirable cell and tissue response, a variety of surface modification techniques has been developed and employed for many years. In this review, the method and trend of surface modification will be introduced and explained in terms of the surface topography and chemistry of dental implants.

Regulatory control of low level radioactive waste in Taiwan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, T.D.S.; Chiou, Syh-Tsong

1996-12-31

The commercial operation of Chinshan Nuclear Power Plant (NPP) Unit One marked the beginning of Taiwan`s nuclear power program. There are now three NPPs, each consisting of two units, in operation. This represents a generating capacity of 5,144 MWe. Nuclear power plants are sharing some 30 percent of electricity supplies in Taiwan. As far as low level radwaste (LLRW) is concerned, Taiwan Power Company (TPC) is the principal producer, contributing more than 90 percent of total volume of waste arising in Taiwan. Small producers, other than nuclear industries, medicine, research institutes, and universities, are responsible for the remaining 10 percent.more » In the paper, the LLRW management policy, organizational scheme, regulatory control over waste treatment, storage, transportation and disposal are addressed. Added to the paper in the last is how this country is managing its Naturally Occurring Radioactive Materials (NORM) waste.« less

Gender differences in economic support and well-being of older Asians.

PubMed

Ofstedal, Mary Beth; Reidy, Erin; Knodel, John

2004-09-01

This report provides a comprehensive analysis of gender differences in economic support and well-being in eight countries in Southern and Eastern Asia (Bangladesh, Malaysia, Indonesia, Singapore, Thailand, Vietnam, Philippines, and Taiwan). We examine multiple economic indicators, including sources of income, receipt of financial and material support, income levels, ownership of assets, and subjective well-being. Results show substantial variation in gender differences across indicators and provide an important qualification to widely held views concerning the globally disadvantaged position of older women. Whereas men tend to report higher levels of income than women, there is generally little gender difference in housing characteristics, asset ownership, or reports of subjective economic well-being. Unmarried women are economically advantaged compared to unmarried men in some respects, in part because they are more likely to be embedded in multigenerational households and receive both direct and indirect forms of support from family members.

Systems metabolic engineering of microorganisms for natural and non-natural chemicals.

PubMed

Lee, Jeong Wook; Na, Dokyun; Park, Jong Myoung; Lee, Joungmin; Choi, Sol; Lee, Sang Yup

2012-05-17

Growing concerns over limited fossil resources and associated environmental problems are motivating the development of sustainable processes for the production of chemicals, fuels and materials from renewable resources. Metabolic engineering is a key enabling technology for transforming microorganisms into efficient cell factories for these compounds. Systems metabolic engineering, which incorporates the concepts and techniques of systems biology, synthetic biology and evolutionary engineering at the systems level, offers a conceptual and technological framework to speed the creation of new metabolic enzymes and pathways or the modification of existing pathways for the optimal production of desired products. Here we discuss the general strategies of systems metabolic engineering and examples of its application and offer insights as to when and how each of the different strategies should be used. Finally, we highlight the limitations and challenges to be overcome for the systems metabolic engineering of microorganisms at more advanced levels.

What We Know about the Public’s Level of Concern for Farm Animal Welfare in Food Production in Developed Countries

PubMed Central

Cornish, Amelia; Raubenheimer, David; McGreevy, Paul

2016-01-01

Simple Summary The production of food from animals poses many ethical challenges. This review explores what we know about different levels of concern for animal welfare in food production by such stakeholders as veterinarians, farmers, and the general public. Despite the general public’s level of concern for animal welfare in food production being high, their understanding and knowledge is poor. Thus, it is suggested that through widespread consciousness raising we can encourage the public to accurately translate their concerns into market drivers, in turn improving the welfare of billions of animals. Abstract Population growth and rising consumption of meat, dairy, eggs and fish are forcing the world to face the intersecting challenges of how to sustainably feed a population expected to exceed 9 billion by 2050, while also controlling the impact of food production on the planet, on people and on animals. This review acknowledges the absence of a globally accepted definition of animal welfare and then explores the literature regarding different levels of concern for animal welfare in food production by such stakeholders as veterinarians, farmers, and the general public. It focuses on the evidence that the general public’s level of concern for animal welfare is linked to various demographic and personal characteristics, such as age, gender, religion, location, meat eating, and knowledge of animal welfare. Certain animals have characteristics that influence concern for their welfare, with those species that are considered more intelligent being afforded more concern. There is compelling evidence that the general public’s understanding of animal welfare in food production is poor. Acknowledging that public concern can be a driving force to change current production methods, the authors suggest widespread consciousness raising to redefine socially acceptable methods of food production from animals and to ensure that it remains in step with societal concerns. PMID:27854336

Perceived Health and Nutrition Concerns as Predictors of Dietary Patterns among Polish Females Aged 13-21 Years (GEBaHealth Project).

PubMed

Jezewska-Zychowicz, Marzena; Wadolowska, Lidia; Kowalkowska, Joanna; Lonnie, Marta; Czarnocinska, Jolanta; Babicz-Zielinska, Ewa

2017-06-16

Health-related concerns can often be factors influencing health-related behaviours. It remains unclear whether a high level of concerns is associated with pro-healthy or unhealthy dietary behaviours and whether any associations between nutrition-related concerns and dietary behaviours exist in a population of girls and young women. The aim of the study was to investigate the associations between perceived health and nutrition concerns and dietary patterns in a representative sample of Polish young females. Data was collected in 2012 through a cross-sectional quantitative survey within the GEBaHealth (Girls Eating Behaviours and Health) project in a group of 1107 Polish girls aged 13-21 years old. Dietary patterns were identified by Principal Component Analysis (PCA) based on dietary data collected with Food Frequency Questionnaires (FFQs). Nutrition and health concerns were assessed separately by two indices: Health Concern Index (HCI) and Nutrition Concern Index (NCI); both based on the Health Concern Scale (HCS). The associations between perceived health and nutrition concerns and each dietary pattern were investigated using logistic regression analysis. Displaying a higher level of health concerns increased the chances of adherence to the upper tertile of 'Fruit & vegetables' pattern (adjusted odds ratio [adj. ORs]: 1.46, 95% Confidence Interval [95% CI]: 1.02-2.10). Displaying a lower level of health concerns increased the chances of the adherence to the upper tertiles of 'Traditional Polish', 'Dairy & fats', 'Fruit and vegetables' and 'Fast food & sweets' patterns (adj. ORs: 1.87, 95% CI: 1.31-2.67; 1.66, 95% CI: 1.18-2.34; 1.57, 95% CI: 1.11-2.22; 1.52, 95% CI: 1.08-2.13; respectively). No significant associations were found between levels of nutrition concerns and dietary patterns in the adjusted model. We found associations between self-perceived health concerns and dietary patterns in our study sample, suggesting health concerns can be an important predictor of dietary behaviours in girls and young women. To increase the effectiveness of healthy eating, an emphasis should be laid on health, reinforced with awareness of nutrition, when advising on food-related decisions.

Joint Decision-Making and the Coordination of a Sustainable Supply Chain in the Context of Carbon Tax Regulation and Fairness Concerns

PubMed Central

Liu, Zhi; Zheng, Xiao-Xue; Gong, Ben-Gang; Gui, Yun-Miao

2017-01-01

Carbon tax regulation and consumers’ low-carbon preference act as incentives for firms to abate emissions. Manufacturers can improve product sustainability and retailers can strengthen the promotion of low-carbon products as part of such abatement. Current incomplete rationality also affects product sustainability and low-carbon promotion level. In this context, we consider a supply chain with a manufacturer and a retailer and investigate the impacts of the manufacturer’s and the retailer’s fairness concerns on their production sustainability level, low-carbon promotion level and profitability. We also explore the coordination contract. The results show that the manufacturer’s and the retailer’s fairness concerns decrease their product sustainability and low-carbon promotion level, together with the profits of the system and the manufacturer. With regard to the retailer’s fairness concern, the product sustainability level and the manufacturer’s profit are lower; moreover, the low-carbon promotion level and the profits of the supply chain and the retailer are higher. A revenue-sharing contract can coordinate the supply chain perfectly; however, members’ fairness concerns increase the difficulty of coordination. Finally, the numerical results reveal that carbon tax regulation can encourage the manufacturer to enhance the product sustainability level. Further, the impacts on the low-carbon promotion level and firms’ profitability are related to the cost coefficients of product sustainability. PMID:29186934

Joint Decision-Making and the Coordination of a Sustainable Supply Chain in the Context of Carbon Tax Regulation and Fairness Concerns.

PubMed

Liu, Zhi; Zheng, Xiao-Xue; Gong, Ben-Gang; Gui, Yun-Miao

2017-11-27

Carbon tax regulation and consumers' low-carbon preference act as incentives for firms to abate emissions. Manufacturers can improve product sustainability and retailers can strengthen the promotion of low-carbon products as part of such abatement. Current incomplete rationality also affects product sustainability and low-carbon promotion level. In this context, we consider a supply chain with a manufacturer and a retailer and investigate the impacts of the manufacturer's and the retailer's fairness concerns on their production sustainability level, low-carbon promotion level and profitability. We also explore the coordination contract. The results show that the manufacturer's and the retailer's fairness concerns decrease their product sustainability and low-carbon promotion level, together with the profits of the system and the manufacturer. With regard to the retailer's fairness concern, the product sustainability level and the manufacturer's profit are lower; moreover, the low-carbon promotion level and the profits of the supply chain and the retailer are higher. A revenue-sharing contract can coordinate the supply chain perfectly; however, members' fairness concerns increase the difficulty of coordination. Finally, the numerical results reveal that carbon tax regulation can encourage the manufacturer to enhance the product sustainability level. Further, the impacts on the low-carbon promotion level and firms' profitability are related to the cost coefficients of product sustainability.

A Hierarchical Security Architecture for Cyber-Physical Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quanyan Zhu; Tamer Basar

2011-08-01

Security of control systems is becoming a pivotal concern in critical national infrastructures such as the power grid and nuclear plants. In this paper, we adopt a hierarchical viewpoint to these security issues, addressing security concerns at each level and emphasizing a holistic cross-layer philosophy for developing security solutions. We propose a bottom-up framework that establishes a model from the physical and control levels to the supervisory level, incorporating concerns from network and communication levels. We show that the game-theoretical approach can yield cross-layer security strategy solutions to the cyber-physical systems.

National Water Quality Laboratory Profile

USGS Publications Warehouse

Raese, Jon W.

1994-01-01

The National Water Quality Laboratory determines organic and inorganic constituents in samples of surface and ground water, river and lake sediment, aquatic plant and animal material, and precipitation collected throughout the United States and its territories by the U.S. Geological Survey. In water year 1994, the Laboratory produced more than 900,000 analytical results for about 65,000 samples. The Laboratory also coordinates an extensive network of contract laboratories for the determination of radiochemical and stable isotopes and work for the U.S. Department of Defense Environmental Contamination Hydrology Program. Heightened concerns about water quality and about the possible effects of toxic chemicals at trace and ultratrace levels have contributed to an increased demand for impartial, objective, and independent data.

Nano-technology and privacy: on continuous surveillance outside the panopticon.

PubMed

Hoven, Jeroen Van Den; Vermaas, Pieter E

2007-01-01

We argue that nano-technology in the form of invisible tags, sensors, and Radio Frequency Identity Chips (RFIDs) will give rise to privacy issues that are in two ways different from the traditional privacy issues of the last decades. One, they will not exclusively revolve around the idea of centralization of surveillance and concentration of power, as the metaphor of the Panopticon suggests, but will be about constant observation at decentralized levels. Two, privacy concerns may not exclusively be about constraining information flows but also about designing of materials and nano-artifacts such as chips and tags. We begin by presenting a framework for structuring the current debates on privacy, and then present our arguments.

Indicators of economic security of the region: a risk-based approach to assessing and rating

NASA Astrophysics Data System (ADS)

Karanina, Elena; Loginov, Dmitri

2017-10-01

The article presents the results of research of theoretical and methodical problems of strategy development for economic security of a particular region, justified by the composition of risk factors. The analysis of those risk factors is performed. The threshold values of indicators of economic security of regions were determined using the methods of socioeconomic statistics. The authors concluded that in modern Russian conditions it is necessary to pay great attention to the analysis of the composition and level of indicators of economic security of the region and, based on the materials of this analysis, to formulate more accurate decisions concerning the strategy of socio-economic development.

Challenges in enzymatic route of mannitol production.

PubMed

Bhatt, Sheelendra Mangal; Mohan, Anand; Srivastava, Suresh Kumar

2013-01-01

Mannitol is an important biochemical often used as medicine and in food sector, yet its biotechnological is not preffered in Industry for large scale production, which may be due to the multistep mechanism involved in hydrogenation and reduction. This paper is a comparative preview covering present chemical and biotechnological approaches existing today for mannitol production at industrial scale. Biotechnological routes are suitable for adaptation at industrial level for mannitol production, and whatever concerns are there had been discussed in detail, namely, raw materials, broad range of enzymes with high activity at elevated temperature suitable for use in reactor, cofactor limitation, reduced by-product formation, end product inhibition, and reduced utilization of mannitol for enhancing the yield with maximum volumetric productivity.

Truck Transport of Hazardous Chemicals : Acetone

DOT National Transportation Integrated Search

1997-03-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Truck Transport of Hazardous Chemicals : Isopropanol

DOT National Transportation Integrated Search

1997-12-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Truck Transport of Hazardous Chemicals : Phosphorus Pentasulfide

DOT National Transportation Integrated Search

1996-08-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Truck Transport of Hazardous Chemicals: 1-Butanol

DOT National Transportation Integrated Search

1995-09-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

46 CFR 98.30-1 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (a) This subpart contains regulations concerning transfer of combustible liquids, certain flammable liquids, and other hazardous materials to or from portable tanks on vessels. (b) This subpart applies to...; and (3) A portable tank authorized for liquid hazardous materials, other than liquefied gases, by the...

46 CFR 98.30-1 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (a) This subpart contains regulations concerning transfer of combustible liquids, certain flammable liquids, and other hazardous materials to or from portable tanks on vessels. (b) This subpart applies to...; and (3) A portable tank authorized for liquid hazardous materials, other than liquefied gases, by the...

46 CFR 98.30-1 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... (a) This subpart contains regulations concerning transfer of combustible liquids, certain flammable liquids, and other hazardous materials to or from portable tanks on vessels. (b) This subpart applies to...; and (3) A portable tank authorized for liquid hazardous materials, other than liquefied gases, by the...

Expert and Knowledge Based Systems.

ERIC Educational Resources Information Center

Demaid, Adrian; Edwards, Lyndon

1987-01-01

Discusses the nature and current state of knowledge-based systems and expert systems. Describes an expert system from the viewpoints of a computer programmer and an applications expert. Addresses concerns related to materials selection and forecasts future developments in the teaching of materials engineering. (ML)

Truck Transport of Hazardous Chemicals : Dodecene-1

DOT National Transportation Integrated Search

1996-09-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...