Simulating Sustainment for an Unmanned Logistics System Concept of Operation in Support of Distributed Operations

DTIC Science & Technology

2017-06-01

designed experiment to model and explore a ship-to-shore logistics process supporting dispersed units via three types of ULSs, which vary primarily in...systems, simulation, discrete event simulation, design of experiments, data analysis, simplekit, nearly orthogonal and balanced designs 15. NUMBER OF... designed experiment to model and explore a ship-to-shore logistics process supporting dispersed units via three types of ULSs, which vary primarily

Focused Logistics; What the Air Force Brings to the Fight

DTIC Science & Technology

2002-04-09

Agency partnered to develop a Strategic Distribution Management Initiative that support the Air Force’s logistics transformation and is linked by Global Command and Control System and Global Combat Support System-Air Force.

Integrated Logistics Support approach: concept for the new big projects: E-ELT, SKA, CTA

NASA Astrophysics Data System (ADS)

Marchiori, G.; Rampini, F.; Formentin, F.

2014-08-01

The Integrated Logistic Support is a process supporting strategies and optimizing activities for a correct project management and system engineering development. From the design & engineering of complex technical systems, to the erection on site, acceptance and after-sales service, EIE GROUP covers all aspects of the Integrated Logistics Support (ILS) process that includes: costing process centered around the life cycle cost and Level of Repair Analyses; engineering process which influences the design via means of reliability, modularization, etc.; technical publishing process based on international specifications; ordering administration process for supply support. Through the ILS, EIE GROUP plans and directs the identification and development of logistics support and system requirements for its products, with the goal of creating systems that last longer and require less support, thereby reducing costs and increasing return on investments. ILS therefore, addresses these aspects of supportability not only during acquisition, but also throughout the operational life cycle of the system. The impact of the ILS is often measured in terms of metrics such as reliability, availability, maintainability and testability (RAMT), and System Safety (RAMS). Example of the criteria and approach adopted by EIE GROUP during the design, manufacturing and test of the ALMA European Antennas and during the design phase of the E-ELT telescope and Dome are presented.

Logistics Force Planner Assistant (Log Planner)

DTIC Science & Technology

1989-09-01

elements. The system is implemented on a MS-DOS based microcomputer, using the "Knowledge Pro’ software tool., 20 DISTRIBUTION/AVAILABILITY OF... service support structure. 3. A microcomputer-based knowledge system was developed and successfully demonstrated. Four modules of information are...combat service support (CSS) units planning process to Army Staff logistics planners. Personnel newly assigned to logistics planning need an

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

The purpose is to describe the logistics study background and approach to providing estimates of of logistics support requirements for Office of Space Science and Applications' payloads in the Space Station era. A concise summary is given of the study results. Future logistics support analysis tasks are identified.

Exploring the Lived Experiences of Program Managers Regarding an Automated Logistics Environment

ERIC Educational Resources Information Center

Allen, Ronald Timothy

2014-01-01

Automated Logistics Environment (ALE) is a new term used by Navy and aerospace industry executives to describe the aggregate of logistics-related information systems that support modern aircraft weapon systems. The development of logistics information systems is not always well coordinated among programs, often resulting in solutions that cannot…

Logistics Reduction and Repurposing Beyond Low Earth Orbit

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Broyan, James L., Jr.

2012-01-01

All human space missions, regardless of destination, require significant logistical mass and volume that is strongly proportional to mission duration. Anything that can be done to reduce initial mass and volume of supplies or reuse items that have been launched will be very valuable. Often, the logistical items require disposal and represent a trash burden. Logistics contributions to total mission architecture mass can be minimized by considering potential reuse using systems engineering analysis. In NASA's Advanced Exploration Systems "Logistics Reduction and Repurposing Project," various tasks will reduce the intrinsic mass of logistical packaging, enable reuse and repurposing of logistical packaging and carriers for other habitation, life support, crew health, and propulsion functions, and reduce or eliminate the nuisance aspects of trash at the same time. Repurposing reduces the trash burden and eliminates the need for hardware whose function can be provided by use of spent logistical items. However, these reuse functions need to be identified and built into future logical systems to enable them to effectively have a secondary function. These technologies and innovations will help future logistics systems to support multiple exploration missions much more efficiently.

Logistics Automation Master Plan (LAMP). Better Logistics Support through Automation.

DTIC Science & Technology

1983-06-01

office micro-computers, positioned throughout the command chain , by providing real time links between LCA and all users: 2. Goals: Assist HQDA staff in...field i.e., Airland Battle 2000. IV-27 Section V: CONCEPT OF EXECUTION Suply (Retail) A. SRstem Description. I. The Division Logistics Property Book...7. Divisional Direct Support Unit Automated Supply System (DDASS)/Direct pport Level Suply Automation (DLSA). DDASS and DLSA are system development

Logistics Reduction and Repurposing Beyond Low Earth Orbit

NASA Technical Reports Server (NTRS)

Broyan, James Lee, Jr.; Ewert, Michael K.

2011-01-01

All human space missions, regardless of destination, require significant logistical mass and volume that is strongly proportional to mission duration. Anything that can be done to reduce initial mass and volume of supplies or reuse items that have been launched will be very valuable. Often, the logistical items require disposal and represent a trash burden. Utilizing systems engineering to analyze logistics from cradle-to-grave and then to potential reuse, can minimize logistics contributions to total mission architecture mass. In NASA's Advanced Exploration Systems Logistics Reduction and Repurposing Project , various tasks will reduce the intrinsic mass of logistical packaging, enable reuse and repurposing of logistical packaging and carriers for other habitation, life support, crew health, and propulsion functions, and reduce or eliminate the nuisances aspects of trash at the same time. Repurposing reduces the trash burden and eliminates the need for hardware whose function can be provided by use of spent logistic items. However, these reuse functions need to be identified and built into future logical systems to enable them to effectively have a secondary function. These technologies and innovations will help future logistic systems to support multiple exploration missions much more efficiently.

Structured Analysis of the Logistic Support Analysis (LSA) Task, and Integrated Logistic Support (ILS) Element, LSA Subtask 301.2.4.2, Reliability Centered Maintenance (RCM)

DTIC Science & Technology

1988-06-01

Di’Lt. ibu601’. I j I o; DTIC Qt.ALTTY I ,2,1 4 AMERICAN POWER JET COMPANY RIDGEFIELD, NJ FALLS CHURCH...The logic is applied to each reparable item in the system/equipment. When the components have been analyzed, an overall system/equipment analysis is...in the AMSDL as applicable to the referenced DIDs of interest. 5. Apply staff experience in logistics support analysis to assure that the intent of the

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 3: OSSA integrated logistics support planning document

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

Guidance in preparing and updating an integrated logistics support plan (ILSP) is given. Clear, concise, and detailed instructions are provided on the preparation and content of an ILSP in order to ensure a quality document that reflects total program requirements.

Teamed for Success: The Imperative for Aligning Systems Engineering and Life Cycle Logistics

DTIC Science & Technology

2013-02-01

January-February 2013 Kobren is director of the DAU Logistics & Sustainment Center, and the DoD Product Support Assessment Human Capital IPT lead...engineering colleagues, here are 10 key life-cycle logistics, product support, and system sustainment tenets to be cognizant of: Decisions You Make Will...and updates to the Life Cycle Sustainment Plan (LCSP). A vast majority of a weapon systems’ total ownership costs are determined by decisions made

Data Management Standards in Computer-aided Acquisition and Logistic Support (CALS)

NASA Technical Reports Server (NTRS)

Jefferson, David K.

1990-01-01

Viewgraphs and discussion on data management standards in computer-aided acquisition and logistic support (CALS) are presented. CALS is intended to reduce cost, increase quality, and improve timeliness of weapon system acquisition and support by greatly improving the flow of technical information. The phase 2 standards, industrial environment, are discussed. The information resource dictionary system (IRDS) is described.

Logistics Operations Management Center: Maintenance Support Baseline (LOMC-MSB)

NASA Technical Reports Server (NTRS)

Kurrus, R.; Stump, F.

1995-01-01

The Logistics Operations Management Center Maintenance Support Baseline is defined. A historical record of systems, applied to and deleted from, designs in support of future management and/or technical analysis is provided. All Flight elements, Ground Support Equipment, Facility Systems and Equipment and Test Support Equipment for which LOMC has responsibilities at Kennedy Space Center and other locations are listed. International Space Station Alpha Program documentation is supplemented. The responsibility of the Space Station Launch Site Support Office is established.

Company Level Logistics on the Future Battlefield.

DTIC Science & Technology

1993-12-17

also expands the terrain envelope in which responsive logistics can be provided. Self diagnostic equipment is currently imbedded in many of our new ...satellite systems, improved sensors, better communications, and long range weapons systems. The combined effect of these systems creates a new ...battlefield. To support combat operations in light of these changes, logistics units must adapt to the new environment. In the past American logistics units

Logistics support economy and efficiency through consolidation and automation

NASA Technical Reports Server (NTRS)

Savage, G. R.; Fontana, C. J.; Custer, J. D.

1985-01-01

An integrated logistics support system, which would provide routine access to space and be cost-competitive as an operational space transportation system, was planned and implemented to support the NSTS program launch-on-time goal of 95 percent. A decision was made to centralize the Shuttle logistics functions in a modern facility that would provide office and training space and an efficient warehouse area. In this warehouse, the emphasis is on automation of the storage and retrieval function, while utilizing state-of-the-art warehousing and inventory management technology. This consolidation, together with the automation capabilities being provided, will allow for more effective utilization of personnel and improved responsiveness. In addition, this facility will be the prime support for the fully integrated logistics support of the operations era NSTS and reduce the program's management, procurement, transportation, and supply costs in the operations era.

The Automated Logistics Element Planning System (ALEPS)

NASA Technical Reports Server (NTRS)

Schwaab, Douglas G.

1992-01-01

ALEPS, which is being developed to provide the SSF program with a computer system to automate logistics resupply/return cargo load planning and verification, is presented. ALEPS will make it possible to simultaneously optimize both the resupply flight load plan and the return flight reload plan for any of the logistics carriers. In the verification mode ALEPS will support the carrier's flight readiness reviews and control proper execution of the approved plans. It will also support the SSF inventory management system by providing electronic block updates to the inventory database on the cargo arriving at or departing the station aboard a logistics carrier. A prototype drawer packing algorithm is described which is capable of generating solutions for 3D packing of cargo items into a logistics carrier storage accommodation. It is concluded that ALEPS will provide the capability to generate and modify optimized loading plans for the logistics elements fleet.

Structured Analysis for the Logistic Support Analysis (LSA) Task and the Integrated Logistic Support (ILS) Element. Structured Analysis - ILS Assessment Element E11. Design Influence

DTIC Science & Technology

1989-01-01

format size of this report, the full identifying entry may well be forcibly shortened, thereby introducing the possibility of misunderstanding. Therefore...OF MATERIEL" 3d . "AR 570-9, "MANPOWER AND EQUIPMENT CONTROL - HOST NATION SUPPORT" 2. AR 700-9, "POLICIES OF THE ARMY LOGISTIC SYSTEM" 3. AR 700-82...PERSONNEL 4. TRAINING 5. SYSTEM SAFETY 6. HEALTH HAZARDS. TEE ASSESSMENT Or MANPRINT INFLUENCE ON DESIGNS IS ADDRESSED IN SIX (6) SPECIFIC AREAS IN

Marine Tactical Command and Control System (MTACCS) Field Development System-1 (FDS-1) assessment: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avery, L.W.; Hunt, S.T.; Savage, S.F.

1992-04-01

The United State Marine Corps (USMC) is continuing the development and fielding of the Marine Corps Tactical Command and Control System (MTACCS), a system which exists in varying states of development, fielding, or modernization. MTACCS is currently composed of the following components: Tactical Combat Operations System (TCO) for ground command and control (C2), Intelligence Analysis System (IAS) with a Genser terminal connected to a TCO workstation for intelligence C2, Marine Integrated Personnel System (MIPS) and a TCO workstation using the Marine Combat Personnel System (MCPERS) software for personnel C2, Marine Integrated Logistics System (MILOGS) which is composed of the Landingmore » Force Asset Distribution System (LFADS), the Marine Air-Ground Task Force (MAGTF) II, and a TCO terminal using the Marine Combat Logistics System (MCLOG) for logistics C2, Marine Corps Fire Support System (MCFSS) for fire support C2, and Advanced Tactical Air Command Central (ATACC) and the Improved Direct Air Support Central for aviation C2.« less

Just-In-Time Logistics

DTIC Science & Technology

2006-02-07

consumer confidence will boost and “just- in-time” logistics will be the lighter and leaner combat logistics support the Marine Corps has desperately...stove-piped logistics systems have done little to build customer or “warrior confidence”. Customers who requesting assets from the supply system...have become used to waiting thirty plus days to receive the asset. Consumers outside of the Marine Corps would refuse to accept such delays, but

Navy CALS Vision. Draft 2.0. Volume 25

DOT National Transportation Integrated Search

1990-10-01

Computer-aided Acquisition and Logistic Support (CALS) is a joint initiative between industry and the Department of Defense (DoD) that is targeted at: (1) Improving designs for weapon systems; (2) Reducing both acquisition and logistic support costs ...

NAVSUP Global Logistics Support

DTIC Science & Technology

2012-08-01

Support $3.5 M Ill SB Contracting Actions Ill SB Value 35% of total spend to Small Business ! NAVAL SUPPLY SYSTEMS COMMAND • Procurement • Barge...Other services now using as well • Awarded Aug 2011, Features: • 100% Sma II Business Set Aside ! • 25 multiple award task order contracts to 8...UP- GLOBAL LOGISTICS I · -~ --; •• ~.c. SUPPORT ,.. NAVAL SUPPLY SYSTEMS COMMAND Fiscal Year 2011 Small Business Contracting Spend: 28,000 actions

Logistics Modeling for Lunar Exploration Systems

NASA Technical Reports Server (NTRS)

Andraschko, Mark R.; Merrill, R. Gabe; Earle, Kevin D.

2008-01-01

The extensive logistics required to support extended crewed operations in space make effective modeling of logistics requirements and deployment critical to predicting the behavior of human lunar exploration systems. This paper discusses the software that has been developed as part of the Campaign Manifest Analysis Tool in support of strategic analysis activities under the Constellation Architecture Team - Lunar. The described logistics module enables definition of logistics requirements across multiple surface locations and allows for the transfer of logistics between those locations. A key feature of the module is the loading algorithm that is used to efficiently load logistics by type into carriers and then onto landers. Attention is given to the capabilities and limitations of this loading algorithm, particularly with regard to surface transfers. These capabilities are described within the context of the object-oriented software implementation, with details provided on the applicability of using this approach to model other human exploration scenarios. Some challenges of incorporating probabilistics into this type of logistics analysis model are discussed at a high level.

Service-Oriented Architecture Approach to MAGTF Logistics Support Systems

DTIC Science & Technology

2013-09-01

Support System-Marine Corps IT Information Technology KPI Key Performance Indicators LCE Logistics Command Element ITV In-transit Visibility LCM...building blocks, options, KPI (key performance indicators), design decisions and the corresponding; the physical attributes which is the second attribute... KPI ) that they impact. h. Layer 8 (Information Architecture) The business intelligence layer and information architecture safeguards the inclusion

Logistic Support for the Navy One-Man One-Atmosphere Diving System (NOMOADS).

DTIC Science & Technology

1987-12-01

AD-19 621 LOGISTIC SUPPORT FOR THE NAVY ONE-MAN ONE-ATMOSPHERE 1/1 DIVING SYSTEM (NOMODS)(U) NAVAL POSTGRADUATE SCHOOL MONTEREY CA M P SMITH DEC 67...6-1 6.1 Major Program Events .................................... 6-1 6.2 M IIe st on es...4-i 6-1 Major Program Events ...................................... 6-2 6-2 M i lestones

A Collection of Technical Papers

NASA Technical Reports Server (NTRS)

1995-01-01

Papers presented at the 6th Space Logistics Symposium covered such areas as: The International Space Station; The Hubble Space Telescope; Launch site computer simulation; Integrated logistics support; The Baikonur Cosmodrome; Probabalistic tools for high confidence repair; A simple space station rescue vehicle; Integrated Traffic Model for the International Space Station; Packaging the maintenance shop; Leading edge software support; Storage information management system; Consolidated maintenance inventory logistics planning; Operation concepts for a single stage to orbit vehicle; Mission architecture for human lunar exploration; Logistics of a lunar based solar power satellite scenario; Just in time in space; NASA acquisitions/logistics; Effective transition management; Shuttle logistics; and Revitalized space operations through total quality control management.

Analysis of Unmanned Systems in Military Logistics

DTIC Science & Technology

2016-12-01

opportunities to employ unmanned systems to support logistic operations. 14. SUBJECT TERMS unmanned systems, robotics , UAVs, UGVs, USVs, UUVs, military...Industrial Robots at Warehouses / Distribution Centers .............................................................................. 17 2. Unmanned...Autonomous Robot Gun Turret. Source: Blain (2010)................................................... 33 Figure 4. Robot Sentries for Base Patrol

Structured Analysis of the Logistics Support Analysis (LSA) Task, and Integrated Logistic Support (ILS) Element, ’Standardization and Interoperability (S and I)’.

DTIC Science & Technology

1988-11-01

system, using graphic techniques which enable users, analysts, and designers to get a clear and common picture of the system and how its parts fit...boxes into hierarchies suitable for computer implementation. ŗ. Structured Design uses tools, especially graphic ones, to render systems readily...LSA, PROCESSES, DATA FLOWS, DATA STORES, EX"RNAL ENTITIES, OVERALL SYSTEMS DESIGN PROCESS, over 19, ABSTRACT (Continue on reverse if necessary and

Ariane Transfer Vehicle - Logistic support to Space Station Freedom

NASA Astrophysics Data System (ADS)

Cougnet, C.; Ricaud, C.; Deutscher, N.

The attractiveness of the Ariane 5 and Ariane transfer vehicle (ATV) is described: it avoids the one-sidedness of the National STS, it increases the lift capacity to meet the demands of the Space Station, and it offers a system independent of, but consistent with, the STS in providing backup contingency capability. The Ariane 5/ATV system is able to launch and transfer any cargo module to the Space Station Freedom (SSF) and dispose of it at the end of the mission. Consideration is given to Space Station and SSF logistic support, and ATV operations and design. Diagrams are provided to illustrate the ATV's requirements and capability; an ATV mission toward the SSF; ATV design and components; the ATV's attitude, layout, and the architecture of the main propulsion system and avionic; and the ATV's performance. It is demonstrated that the Ariane 5/ATV system would be an adequate complement to the NSTS for logistic support of the SSF.

Integrated tracking of components by engineering and logistics utilizing logistics asset tracking system

NASA Technical Reports Server (NTRS)

Renfroe, Michael B.; Mcdonald, Edward J.; Bradshaw, Kimberly

1988-01-01

The Logistics Asset Tracking System (LATS) devised by NASA contains data on Space Shuttle LRUs that are daily updated to reflect such LRU status changes as repair due to failure or modification due to changing engineering requirements. The implementation of LATS has substantially increased personnel responsiveness, preventing costly delays in Space Shuttle processing and obviating hardware cannibalization. An evaluation is presented of LATS achievements in the direction of an integrated logistical support posture.

Soviet Railroad Troops: An Updated Review.

DTIC Science & Technology

1980-01-01

4 Existing Soviet Transport System ........................... 4 *Scarcity of the Rail System ...basis for a totally new evaluation of the Soviet logistics system as a whole, significant misunderstanding will arise if rail capabilities are degraded...sizeable superiority in divisions, tanks, and artillery, the austere Soviet logistic system is suitable only for supporting a short war. In fact, the

Internal Logistics System Selection with Total Cost of Ownership Analysis

NASA Astrophysics Data System (ADS)

Araújo, Inês; Pimentel, Carina; Godina, Radu; Matias, João C. O.

2017-06-01

In this paper a methodology was followed in order to support the decision-making of one industrial unit regarding its internal logistics system. The addressed factory was facing issues with their internal logistics approach. Some alternatives were pointed out and a proper total cost of ownership (TCO) analysis was developed. This analysis was taken in order to demonstrate the more cost-effective solution for the internal logistics system. This tool is more and more valued by the companies, due to their willing to reduce the costs that are associated with the way of doing business. Despite the proposal of the best choice for the internal logistics system of the enterprise, this study also intends to present some conclusions about the match between the nature of the industrial unit and the logistics systems that best fit the requirements of those.

Translating supportability requirements into design reality

NASA Astrophysics Data System (ADS)

Buche, J.; Cohen, I.

1986-10-01

This paper explores some of the principal issues in the integration of supportability into the design process. Roles of the contractor's design, supportability and management specialists and their government counterparts are discussed as they relate to logistics influence in design. Methods and processes by which weapon system logistics and readiness requirements are established, assessed, allocated to system elements and translated into specific design features are described. Tradeoff consideration, an approach to effective tradeoff criteria, and the progress of supportability issues through the program phases are identified with particular emphasis on the necessity for developing and maintaining an effective audit trail.

Structured Analysis of the Logistic Support Analysis (LSA) Task, ’Integrated Logistic Support (ILS) Assessment Maintenance Planning E-1 Element’ (APJ 966-204)

DTIC Science & Technology

1988-10-01

Structured Analysis involves building a logical (non-physical) model of a system, using graphic techniques which enable users, analysts, and designers to... Design uses tools, especially graphic ones, to render systems readily understandable. 8 Ř. Structured Design offers a set of strategies for...in the overall systems design process, and an overview of the assessment procedures, as well as a guide to the overall assessment. 20. DISTRIBUTION

Maintenance and Logistics Support for the International Monitoring System Network of the CTBTO

NASA Astrophysics Data System (ADS)

Haslinger, F.; Brely, N.; Akrawy, M.

2007-05-01

The global network of the International Monitoring System (IMS) of the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), once completed, will consist of 321 monitoring facilities of four different technologies: hydroacoustic, seismic, infrasonic, and radionuclide. As of today, about 65% of the installations are completed and contribute data to the products issued by the International Data Centre (IDC) of the CTBTO. In order to accomplish the task to reliably collect evidence for any potential nuclear test explosion anywhere on the planet, all stations are required to perform to very high data availability requirements (at least 98% data availability over a 12-month period). To enable reaching this requirement, a three-layer concept has been developed to allow efficient support of the IMS stations: Operations, Maintenance and Logistics, and Engineering. Within this concept Maintenance and Logistics provide second level support of the stations, whereby problems arising at the station are assigned through the IMS ticket system to Maintenance if they cannot be resolved on the Operations level. Maintenance will then activate the required resources to appropriately address and ultimately resolve the problem. These resources may be equipment support contracts, other third party contracts, or the dispatch of a maintenance team. Engineering Support will be activated if the problem requires redesign of the station or after catastrophic failures when a total rebuild of a station may be necessary. In this model, Logistics Support is responsible for parts replenishment and support contract management. Logistics Support also collects and analyzes relevant failure mode and effect information, develops supportability models, and has the responsibility for document management, obsolescence, risk & quality, and configuration management, which are key elements for efficient station support. Maintenance Support in addition is responsible for maintenance strategies, for planning and oversight of the execution of preventive maintenance programs by the Station Operators, and for review of operational troubleshooting procedures used in first level support. Particular challenges for the efficient and successful Maintenance and Logistics Support of the IMS network lie in the specific political boundary conditions regulating its implementation, in the fact that all IMS facilities and their equipment are owned by the respective host countries, and in finding the appropriate balance between outsourcing services and retaining essential in-house expertise.

An Overview of Integrated Logistic Support in Medical Material Programs.

DTIC Science & Technology

1980-12-01

OF MEDICAL INTEGRATED LOGISTIC SUPPORT ----------------- 7 B. PROBLEM DEFINITION AND OBJECTIVE ------------ 9 C. GENERAL APPROACH AND METHODOLOGY...SYSTEM ---------------------- 61 C. GENERAL CONCLUSIONS ------------------------- 63 D. RECOMMENDATIONS ----------------------------- 73 E. CONCLUSION...21 Technological advancement has caused major changes in medicine and dentistry in the last several decades. Inten- sive care units, computerized axial

Automatic Generation of Customized, Model Based Information Systems for Operations Management.

DTIC Science & Technology

The paper discusses the need for developing a customized, model based system to support management decision making in the field of operations ... management . It provides a critique of the current approaches available, formulates a framework to classify logistics decisions, and suggests an approach for the automatic development of logistics systems. (Author)

An IPSO-SVM algorithm for security state prediction of mine production logistics system

NASA Astrophysics Data System (ADS)

Zhang, Yanliang; Lei, Junhui; Ma, Qiuli; Chen, Xin; Bi, Runfang

2017-06-01

A theoretical basis for the regulation of corporate security warning and resources was provided in order to reveal the laws behind the security state in mine production logistics. Considering complex mine production logistics system and the variable is difficult to acquire, a superior security status predicting model of mine production logistics system based on the improved particle swarm optimization and support vector machine (IPSO-SVM) is proposed in this paper. Firstly, through the linear adjustments of inertia weight and learning weights, the convergence speed and search accuracy are enhanced with the aim to deal with situations associated with the changeable complexity and the data acquisition difficulty. The improved particle swarm optimization (IPSO) is then introduced to resolve the problem of parameter settings in traditional support vector machines (SVM). At the same time, security status index system is built to determine the classification standards of safety status. The feasibility and effectiveness of this method is finally verified using the experimental results.

Expendable launch vehicle transportation for the space station

NASA Technical Reports Server (NTRS)

Corban, Robert R.

1988-01-01

Logistics transportation will be a critical element in determining the Space Station Freedom's level of productivity and possible evolutionary options. The current program utilizes the Space Shuttle as the only logistics support vehicle. Augmentation of the total transportation capability by expendable launch vehicles (ELVs) may be required to meet demanding requirements and provide for enhanced manifest flexibility. The total operational concept from ground operations to final return of support hardware or its disposal is required to determine the ELV's benefits and impacts to the Space Station Freedom program. The characteristics of potential medium and large class ELVs planned to be available in the mid-1990's (both U.S. and international partners' vehicles) indicate a significant range of possible transportation systems with varying degrees of operational support capabilities. The options available for development of a support infrastructure in terms of launch vehicles, logistics carriers, transfer vehicles, and return systems is discussed.

Feasibility Analysis and Prototyping of a Fast Autonomous Recon system

DTIC Science & Technology

2017-06-01

Test and Evaluation Interim Contractor Support System Assessment OPERATIONAL USE AND SYSTEM SUPPORT System Operation in the User Environment...Sustaining Maintenance and Logistics Support Operational Testing System Modifications for Improvement Contractor Support System Assessment...helicopter but has the added benefit of high -speed flight similar to a fixed-wing aircraft. Figure 1 shows the two different flight modes of the V-22

Lunar Surface Systems Supportability Technology Development Roadmap

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony;

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 4: Supportability analysis of the 1.8m centrifuge

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

Supportability issues for the 1.8 meter centrifuge in the Life Science Research Facility are addressed. The analysis focuses on reliability and maintainability and the potential impact on supportability and affordability. Standard logistics engineering methodologies that will be applied to all Office of Space Science and Applications' (OSSA) payload programs are outlined. These methodologies are applied to the 1.8 meter centrifuge.

Estimating Logistics Support of Reusable Launch Vehicles During Conceptual Design

NASA Technical Reports Server (NTRS)

Morris, W. D.; White, N. H.; Davies, W. T.; Ebeling, C. E.

1997-01-01

Methods exist to define the logistics support requirements for new aircraft concepts but are not directly applicable to new launch vehicle concepts. In order to define the support requirements and to discriminate among new technologies and processing choices for these systems, NASA Langley Research Center (LaRC) is developing new analysis methods. This paper describes several methods under development, gives their current status, and discusses the benefits and limitations associated with their use.

Specifications of a Simulation Model for a Local Area Network Design in Support of Stock Point Logistics Integrated Communications Environment (SPLICE).

DTIC Science & Technology

1982-10-01

class queueing system with a preemptive -resume priority service discipline, as depicted in Figure 4.2. Concerning a SPLICLAN configuration a node can...processor can be modeled as a single resource, multi-class queueing system with a preemptive -resume priority structure as the one given in Figure 4.2. An...LOCAL AREA NETWORK DESIGN IN SUPPORT OF STOCK POINT LOGISTICS INTEGRATED COMMUNICATIONS ENVIRONMENT (SPLICE) by Ioannis Th. Mastrocostopoulos October

Systems Analysis of In-Space Manufacturing Applications for the International Space Station and the Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Owens, Andrew C.; De Weck, Olivier L.

2016-01-01

Maintenance logistics support is a significant challenge for extended human operations in space, especially for missions beyond Low Earth Orbit (LEO). For missions to Mars (such as NASA's Evolvable Mars Campaign (EMC)), where timely resupply or abort in the event of emergency will not be possible, maintenance logistics mass is directly linked to the Probability of Loss of Crew (P(LoC)), and the cost of driving down risk is an exponential increase in mass requirements. The logistics support strategies that have maintained human operations in LEO will not be effective for these deep space missions. In-Space Manufacturing (ISM) is a promising technological solution that could reduce logistics requirements, mitigate risks, and augment operational capabilities, enabling Earth- independent human spaceflight. This paper reviews maintenance logistics challenges for spaceflight operations in LEO and beyond, and presents a summary of selected results from a systems analysis of potential ISM applications for the ISS and EMC. A quantitative modeling framework and sample assessment of maintenance logistics and risk reduction potential of this new technology is also presented and discussed.

Outsourcing Operational Logistics: Buyer Beware

DTIC Science & Technology

2003-05-16

This logistics system takes far too many people to conduct support missions and does not provide the desired customer performance in terms of...FINAL 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE (U) 5b. GRANT NUMBER 5c...Form 298 (Rev. 8-98) 1 (Unclassified Paper) NAVAL WAR COLLEGE Newport, R.I. OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE By LAMONT WOODY Lieutenant

Logistics Reduction Technologies for Exploration Missions

NASA Technical Reports Server (NTRS)

Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

2014-01-01

Human exploration missions under study are very limited by the launch mass capacity of existing and planned vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Consequently, crew item logistical mass is typically competing with vehicle systems for mass allocation. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing five logistics technologies guided by a systems engineering cradle-to-grave approach to enable used crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as the mission duration increases. This paper provides a description and the challenges of the five technologies under development and the estimated overall mission benefits of each technology.

Study on the key technology of grain logistics tracking system

NASA Astrophysics Data System (ADS)

Zhen, Tong; Ge, Hongyi; Jiang, Yuying; Che, Yi

2010-07-01

In recent year, with the rapid development of GIS technology, more and more programming problems depend on the GIS technology and professional model system. The solution of auxiliary programming problem by using GIS technology, which has become very popular. GIS is an important tool and technology, that captures, stores, analyzes, manages, and presents data that are linked to location. A grain logistics distribution system based on GIS is established, which provides a visualization scheme during the process of grain circulation and supports users making decision and analyzing for grain logistics enterprise.

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2012 CFR

2012-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2014 CFR

2014-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2013 CFR

2013-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 2A. GSFLS visit findings (appendix). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1978-01-31

This appendix is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. This appendix provides the legal/regulatory reference material, supportive of Volume 2 - GSFLS Visit Finding and Evaluations; and certain background material on British Nuclear Fuel Limited (BNFL).

Research and application of genetic algorithm in path planning of logistics distribution vehicle

NASA Astrophysics Data System (ADS)

Wang, Yong; Zhou, Heng; Wang, Ying

2017-08-01

The core of the logistics distribution system is the vehicle routing planning, research path planning problem, provide a better solution has become an important issue. In order to provide the decision support for logistics and distribution operations, this paper studies the problem of vehicle routing with capacity constraints (CVRP). By establishing a mathematical model, the genetic algorithm is used to plan the path of the logistics vehicle to meet the minimum logistics and transportation costs.

41 CFR 101-30.404 - Supply support.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.4-Use of the Federal Catalog System § 101-30.404 Supply support. Civilian agencies requiring supply... is in the GSA Handbook, Federal Catalog System-Logistics Data (FPMR 101-30.3), issued by the...

41 CFR 101-30.404 - Supply support.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.4-Use of the Federal Catalog System § 101-30.404 Supply support. Civilian agencies requiring supply... is in the GSA Handbook, Federal Catalog System-Logistics Data (FPMR 101-30.3), issued by the...

41 CFR 101-30.404 - Supply support.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.4-Use of the Federal Catalog System § 101-30.404 Supply support. Civilian agencies requiring supply... is in the GSA Handbook, Federal Catalog System-Logistics Data (FPMR 101-30.3), issued by the...

41 CFR 101-30.404 - Supply support.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.4-Use of the Federal Catalog System § 101-30.404 Supply support. Civilian agencies requiring supply... is in the GSA Handbook, Federal Catalog System-Logistics Data (FPMR 101-30.3), issued by the...

41 CFR 101-30.404 - Supply support.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.4-Use of the Federal Catalog System § 101-30.404 Supply support. Civilian agencies requiring supply... is in the GSA Handbook, Federal Catalog System-Logistics Data (FPMR 101-30.3), issued by the...

The environmental control and life-support system for a lunar base: What drives its design

NASA Technical Reports Server (NTRS)

Hypes, Warren D.; Hall, John B., Jr.

1992-01-01

The purpose of this paper is to identify and briefly discuss some of the ground rules and mission scenario details that become drivers of the environmental control and life support (ECLS) system design and of the logistics related to the design. This paper is written for mission planners and non-ECLS system engineers to inform them of the details that will be important to the ECLS engineer when the design phase is reached. In addition, examples illustrate the impact of some selected mission characteristics on the logistics associated with ECLS systems. The last section of this paper focuses on the ECLS system technology development sequence and highlights specific portions that need emphasis.

Guidelines for the Development and Implementation of a Logistic Resource Annex to the Five Year Defense Program. Volume 4. A Logistic Resource Annex for the Marine Corps Section of the DNFYP

DTIC Science & Technology

1978-10-01

Information ; Logistics Planning; Management Planning and Control; Management Information Systems; Management; Military Supplies; Acquisition; JO...Arlington, Virginia 22202 Contract DAHC 15-73C-0200 Task 78-II-1 CONTENTS GLOSSARY : v SUMMARY ix I. INTRODUCTION 1 II. MARINE CORPS SUPPORT OP...Materiel Command Navy Cost Information System/FYDP Subsystem Non-Industrial Fund Non-Telecommunications Offfice of the Assistant Secretary of Defense

Manpower Planning for New Weapon Systems

DTIC Science & Technology

1978-12-01

Logistics) take the following actions : 1. Institute formal, post-DSARC management reviews of integrated logistic support implementation to verify...that actions are being taken to minimize manpower and other support resource requirements. 2. Urge the Army, Navy and Marine Corps to press on with...examines how manpower planning actually is done by the military services, and recommends actions by the Assistant Secretary of Defense (Manpower Reserve

Tradeoff Analysis for Combat Service Support Wireless Communications Alternatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burnette, John R.; Thibodeau, Christopher C.; Greitzer, Frank L.

2002-02-28

As the Army moves toward more mobile and agile forces and continued sustainment of numerous high-cost legacy logistics management systems, the requirement for wireless connectivity and a wireless network to supporting organizations has become ever more critical. There are currently several Army communications initiatives underway to resolve this wireless connectivity issue. However, to fully appreciate and understand the value of these initiatives, a Tradeoff Analysis is needed. The present study seeks to identify and assess solutions. The analysis identified issues that impede Interim Brigade Combat Team (IBCT) communication system integration and outlined core requirements for sharing of logistics data betweenmore » the field and Army battle command systems. Then, the analysis examined wireless communication alternatives as possible solutions for IBCT logistics communications problems. The current baseline system was compared with possible alternatives involving tactical radio systems, wireless/near term digital radio, cellular satellite, and third-generation (3G) wireless technologies. Cellular satellite and 3G wireless technologies offer clear advantages and should be considered for later IBCTs.« less

Market Survey: Biological Detectors. Guide for Selection of Detection Devices and Systems

DTIC Science & Technology

2006-02-01

samples. There are no real concerns with logistical or operational concerns, as issues such as size, weight, signature, transportation , additional equipment...of the detection system or device on support and logistical systems. 2.1 Transportation Measure. Ability to transport the detection system or device...supplied, such as water, fuel, batteries, chemical, power, etc.) that have to be transported to the site for detection. 100 0-1 consumable or

Navy Technical Information Presentation System (NTIPS) Test and Implementation Strategy

DTIC Science & Technology

1981-12-01

IC AROEROCK I NAOI S ~ i P RF R M N C AVI AT OIO N A N DDEPARTMENT STIPRUCTRMNES COMPUATIONAN DEPARTMENT -MATHEMATICS AND 17 LOGISTICS DEPARTMENT leI...and Subtitle) S . TYPE OF REPORT & PERIOD COVERED NAVY TECHNICAL INFORMATION PRESENTATION Final SYSTEM (NTIPS) TEST AND IMPLEMENTATION 6. PERFORMING...CLASSIFICATION OP THIS PAGE (1nor. Data Enteed) ock 20 continued) system operation, training, maintenance, and logistics support. This system was

Evaluation of Multi-Level Support Structure Requirements for New Weapon Systems.

DTIC Science & Technology

1987-09-01

transformer 1 total consumed manhours on this level 19.45 hrs average manhrs within 4 weeks on this level : .38 hrs average rounded number of mainten; personal ...major unit data to provide conclusions about the logistics behavior of failing weapon systems. The modeling of system behavior with CAESAR has severa-l...characteristic data and major unit data to provide conclusions about the logistics behavior of failing weapon systems. The modelling of system behavior

The application of virtual reality systems as a support of digital manufacturing and logistics

NASA Astrophysics Data System (ADS)

Golda, G.; Kampa, A.; Paprocka, I.

2016-08-01

Modern trends in development of computer aided techniques are heading toward the integration of design competitive products and so-called "digital manufacturing and logistics", supported by computer simulation software. All phases of product lifecycle: starting from design of a new product, through planning and control of manufacturing, assembly, internal logistics and repairs, quality control, distribution to customers and after-sale service, up to its recycling or utilization should be aided and managed by advanced packages of product lifecycle management software. Important problems for providing the efficient flow of materials in supply chain management of whole product lifecycle, using computer simulation will be described on that paper. Authors will pay attention to the processes of acquiring relevant information and correct data, necessary for virtual modeling and computer simulation of integrated manufacturing and logistics systems. The article describes possibilities of use an applications of virtual reality software for modeling and simulation the production and logistics processes in enterprise in different aspects of product lifecycle management. The authors demonstrate effective method of creating computer simulations for digital manufacturing and logistics and show modeled and programmed examples and solutions. They pay attention to development trends and show options of the applications that go beyond enterprise.

Building a Decision Support System for Inpatient Admission Prediction With the Manchester Triage System and Administrative Check-in Variables.

PubMed

Zlotnik, Alexander; Alfaro, Miguel Cuchí; Pérez, María Carmen Pérez; Gallardo-Antolín, Ascensión; Martínez, Juan Manuel Montero

2016-05-01

The usage of decision support tools in emergency departments, based on predictive models, capable of estimating the probability of admission for patients in the emergency department may give nursing staff the possibility of allocating resources in advance. We present a methodology for developing and building one such system for a large specialized care hospital using a logistic regression and an artificial neural network model using nine routinely collected variables available right at the end of the triage process.A database of 255.668 triaged nonobstetric emergency department presentations from the Ramon y Cajal University Hospital of Madrid, from January 2011 to December 2012, was used to develop and test the models, with 66% of the data used for derivation and 34% for validation, with an ordered nonrandom partition. On the validation dataset areas under the receiver operating characteristic curve were 0.8568 (95% confidence interval, 0.8508-0.8583) for the logistic regression model and 0.8575 (95% confidence interval, 0.8540-0. 8610) for the artificial neural network model. χ Values for Hosmer-Lemeshow fixed "deciles of risk" were 65.32 for the logistic regression model and 17.28 for the artificial neural network model. A nomogram was generated upon the logistic regression model and an automated software decision support system with a Web interface was built based on the artificial neural network model.

Reliability Driven Space Logistics Demand Analysis

NASA Technical Reports Server (NTRS)

Knezevic, J.

1995-01-01

Accurate selection of the quantity of logistic support resources has a strong influence on mission success, system availability and the cost of ownership. At the same time the accurate prediction of these resources depends on the accurate prediction of the reliability measures of the items involved. This paper presents a method for the advanced and accurate calculation of the reliability measures of complex space systems which are the basis for the determination of the demands for logistics resources needed during the operational life or mission of space systems. The applicability of the method presented is demonstrated through several examples.

Logistics support of the Japanese Experiment Module by the H-II rocket

NASA Astrophysics Data System (ADS)

Shibato, Yoji; Eto, Takao; Fukushima, Yukio; Takatsuka, Hitoshi

1988-10-01

This paper describes salient design features of the Japanese Experiment Module (JEM), which will be attached to the Space Station. Special attention is given to the logistic support of the JEM (which is planned to become operational in 1990s) by the HOPE orbiter, which will be used for the resupply and the retrieval of the JEM, and the H-II rocket, which will be used to launch the HOPE. The concepts of HOPE and the H-II rocket are discussed together with the estimated logistics requirements of this system. Configuration diagrams are included.

Cradle-to-Grave Logistic Technologies for Exploration Missions

NASA Technical Reports Server (NTRS)

Broyan, James L.; Ewert, Michael K.; Shull, Sarah

2013-01-01

Human exploration missions under study are very limited by the launch mass capacity of exiting and planned vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Consequently, crew item logistical mass is typically competing with vehicle systems for mass allocation. NASA is Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing four logistics technologies guided by a systems engineering cradle-to-grave approach to enable used crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion supply gases. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as the mission duration increases. This paper provides a description, benefits, and challenges of the four technologies under development and a status of progress at the mid ]point of the three year AES project.

Space shuttle food system study. Volume 1: System design report

NASA Technical Reports Server (NTRS)

1974-01-01

Data were assembled which define the optimum food system to support the space shuttle program, and which provide sufficient engineering data to support necessary requests for proposals towards final development and installment of the system. The study approach used is outlined, along with technical data and sketches for each functional area. Logistic support analysis, system assurance, and recommendations and conclusions based on the study results are also presented.

Development of a Logistics Support Framework for Defense Mapping Agency (DMA) Automated Systems

DTIC Science & Technology

1990-09-01

cycle of a particular system. This research identified principles of management , design or system life cycle processes, and ILS elements needed to...Delphi results gathered from DMA expert opinions. The principles of management , depicted in the Logistics Systems Management Matrix (LSMM) portrayed...review were used to form the Delphi survey questions in Chapter III. As shown in Figure 2, the LSMM is a three-dimensional model with thp principles of management on

Building Combat Strength through Logistics: Translating the New Air Force Logistics Concept of Operations into Action

DTIC Science & Technology

1988-03-31

MARCI 1988 iAm U m WI 4EUnclT CLSIIAION OF THIS PAGE REPORT DOCUMENTATION PAGE is REPORT SECURITY CLASSIFICATION lb. RESTRICTIVE MARKINGS 2.. SECUR ...logistics system of the future more capable of supporting the full spectrumn of war 20 OISTRIaSUTION.’AVAILAeILiTY 0" ABSTRACT 21 ABSTRACT SECURITY ... SECURITY CLASSIFICATION OT: THIS PAGF Unclas ’SCUFUTY Cý= I!FICATION OF THIS PAGE 1,Qwcont.) scenarios. Today’s logistics processes assume wartime

A Computer-Managed Instruction Support System for Large Group Individualized Instruction.

ERIC Educational Resources Information Center

Countermine, Terry; Singh, Jane M.

1977-01-01

The Pennsylvania State University College of Education's Instruction Support System (ISS) was developed to manage the logistical operation of large group individualized competency-based instruction. Software and hardware charting, operational procedures, and data from student opinion questionnaires are cited. (RAO)

Defense Logistics: Army Should Track Financial Benefits Realized from its Logistics Modernization Program

DTIC Science & Technology

2013-11-01

system does not support certain critical requirements, including enabling the Army to generate auditable financial statements by fiscal year 2017 ...current system will not enable the Army to generate auditable financial statements by 2017 , the statutory deadline for this goal. Increment 2, which...fourth quarter of fiscal year 2017 , all three of these enterprise resource planning systems are expected to be fully deployed, to share a common set

Focused Logistics and Support for Force Projection in Force XXI and Beyond

DTIC Science & Technology

1999-12-09

business system linking trading partners with point of sale demand and real time manufacturing for clothing items.17 Quick Response achieved $1.7...be able to determine the real - time status and supply requirements of units. With "distributed logistics system software model hosts൨ and active...location, quantity, condition, and movement of assets. The system is designed to be fully automated, operate in near- real time with an open-architecture

Linking Logistics and Operations: A Case Study of World War II Air Power

DTIC Science & Technology

1991-01-01

Weapon System Evaluation Group, 1951, p. 30). The logistic innovation greatly extended the time that combat ships could remain on station and...presented. This Note was produced under the Project AIR FORCE Resource Management and System Acquisition Program in the project "Combat Support C3 Needs...maintenance workload data suggest either unacceptable system performance or excessive costs. The predictive power of these models is so poor as to

Neural network modeling for surgical decisions on traumatic brain injury patients.

PubMed

Li, Y C; Liu, L; Chiu, W T; Jian, W S

2000-01-01

Computerized medical decision support systems have been a major research topic in recent years. Intelligent computer programs were implemented to aid physicians and other medical professionals in making difficult medical decisions. This report compares three different mathematical models for building a traumatic brain injury (TBI) medical decision support system (MDSS). These models were developed based on a large TBI patient database. This MDSS accepts a set of patient data such as the types of skull fracture, Glasgow Coma Scale (GCS), episode of convulsion and return the chance that a neurosurgeon would recommend an open-skull surgery for this patient. The three mathematical models described in this report including a logistic regression model, a multi-layer perceptron (MLP) neural network and a radial-basis-function (RBF) neural network. From the 12,640 patients selected from the database. A randomly drawn 9480 cases were used as the training group to develop/train our models. The other 3160 cases were in the validation group which we used to evaluate the performance of these models. We used sensitivity, specificity, areas under receiver-operating characteristics (ROC) curve and calibration curves as the indicator of how accurate these models are in predicting a neurosurgeon's decision on open-skull surgery. The results showed that, assuming equal importance of sensitivity and specificity, the logistic regression model had a (sensitivity, specificity) of (73%, 68%), compared to (80%, 80%) from the RBF model and (88%, 80%) from the MLP model. The resultant areas under ROC curve for logistic regression, RBF and MLP neural networks are 0.761, 0.880 and 0.897, respectively (P < 0.05). Among these models, the logistic regression has noticeably poorer calibration. This study demonstrated the feasibility of applying neural networks as the mechanism for TBI decision support systems based on clinical databases. The results also suggest that neural networks may be a better solution for complex, non-linear medical decision support systems than conventional statistical techniques such as logistic regression.

Air Force Journal of Logistics: Logistics Dimensions Improving Bare Base Agile Combat Support, The Path to Integration. Volume 28, Number 2

DTIC Science & Technology

2004-01-01

the system is balanced, there is the right flow of new pilots to match the availability of instructors for initial training missions, the right mix of...which attempted to redesign and streamline the DoD global distribution system , significantly improved delivery time to test locations.4 During its...somewhat confusing priority system that does not guarantee cargo delivery at a specific time and a pricing system that does not adequately differentiate

The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model.

PubMed

Liu, Tongzhu; Shen, Aizong; Hu, Xiaojian; Tong, Guixian; Gu, Wei

2017-06-01

We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers.

Technological Support for Logistics Transportation Systems

NASA Astrophysics Data System (ADS)

Bujak, Andrzej; Śliwa, Zdzisław; Gębczyńska, Alicja

The modern world is changing introducing robots, remotely controlled vehicles and other crewless means of transportation to reduce people's mistakes, as the main cause of incidents and crashes during traffic. New technologies are supporting operators and drivers, and according to some studies they can even replace them. Such programs as: AHS, UAH, IVBSS or MTVR are under development to improve traffic flow and its safety, to reduce traffic hazards and crashes. It is necessary to analyze such concepts and implement them boldly, including Polish logistics' companies, new programs, highways' system etc., as they will be applied in the future, so it is necessary to prepare logistics infrastructure ahead of time in order to capitalize on these improvements. The problem is quite urgent as transportation in the country must not be outdated to meet clients' expectations and to keep pace with competing foreign companies.

A multicriteria decision making model for assessment and selection of an ERP in a logistics context

NASA Astrophysics Data System (ADS)

Pereira, Teresa; Ferreira, Fernanda A.

2017-07-01

The aim of this work is to apply a methodology of decision support based on a multicriteria decision analyses (MCDA) model that allows the assessment and selection of an Enterprise Resource Planning (ERP) in a Portuguese logistics company by Group Decision Maker (GDM). A Decision Support system (DSS) that implements a MCDA - Multicriteria Methodology for the Assessment and Selection of Information Systems / Information Technologies (MMASSI / IT) is used based on its features and facility to change and adapt the model to a given scope. Using this DSS it was obtained the information system that best suited to the decisional context, being this result evaluated through a sensitivity and robustness analysis.

CTN summary of DSREDS, EDCARS, EDMICS CALS readiness testing. [Computer-aided Acquisition and Logistic Support (CALS) CALS Test Network (CTN), Digital Storage Retrieval Eng. Data System (DSREDS), Eng. Data Computer Assisted Retrieval System (EDCARS), Eng. Data Management Information and Control System (EDMICS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitschkowetz, N.; Vickers, D.L.

This report provides a summary of the Computer-aided Acquisition and Logistic Support (CALS) Test Network (CTN) Laboratory Acceptance Test (LAT) and User Application Test (UAT) activities undertaken to evaluate the CALS capabilities being implemented as part of the Department of Defense (DOD) engineering repositories. Although the individual testing activities provided detailed reports for each repository, a synthesis of the results, conclusions, and recommendations is offered to provide a more concise presentation of the issues and the strategies, as viewed from the CTN perspective.

A cyber-enabled spatial decision support system to inventory Mangroves in Mozambique: coupling scientific workflows and cloud computing

Treesearch

Wenwu Tang; Wenpeng Feng; Meijuan Jia; Jiyang Shi; Huifang Zuo; Christina E. Stringer; Carl C. Trettin

2017-01-01

Mangroves are an important terrestrial carbon reservoir with numerous ecosystem services. Yet, it is difficult to inventory mangroves because of their low accessibility. A sampling approach that produces accurate assessment while maximizing logistical integrity of inventory operation is often required. Spatial decision support systems (SDSSs) provide support for...

Air Force Tech Order Management System (AFTOMS). Automation Plan-Final Report. Version 1.0

DOT National Transportation Integrated Search

1988-02-01

Computer aided Acquisition and Logistics Support (CALS) is a Department of Defense (DoD) program designed to improve weapon systems support through digital automation. In June 1985, the joint industry/DoD Task Force on CALS issued a five volume repor...

Microworld Simulations: A New Dimension in Training Army Logistics Management Skills

DTIC Science & Technology

2004-01-01

Providing effective training to Army personnelis always challenging, but the Army facessome new challenges in training its logisticsstaff managers in...soldiers are stationed and where materiel and services are readily available. The design and management of the Army’s Combat Ser- vice Support (CSS) large...scale logistics systems are increasingly important. The skills that are required to manage these systems are difficult to train. Large deployments

Logistics Reduction Technologies for Exploration Missions

NASA Technical Reports Server (NTRS)

Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

2014-01-01

Human exploration missions under study are limited by the launch mass capacity of existing and planned launch vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Although mass is typically the focus of exploration missions, due to its strong impact on launch vehicle and habitable volume for the crew, logistics volume also needs to be considered. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing six logistics technologies guided by a systems engineering cradle-to-grave approach to enable after-use crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. Reduction of mass has a corresponding and significant impact to logistical volume. The reduction of logistical volume can reduce the overall pressurized vehicle mass directly, or indirectly benefit the mission by allowing for an increase in habitable volume during the mission. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as mission durations increase. Early studies have shown that the use of advanced logistics technologies can save approximately 20 m(sup 3) of volume during transit alone for a six-person Mars conjunction class mission.

DoD Weapon System Acquisition Reform Product Support Assessment

DTIC Science & Technology

2009-11-01

can be best effected by working through the Defense Acquisition University, the Logistics Functional IPT, the Acquisition Management Functional... WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Department of Defense,Undersecretary of Defense for Acquisition,Technology and...each year in product support. Reformed stewardship—driven by improving product support and achieving more cost- effective weapon system readiness

Knowledge-based commodity distribution planning

NASA Technical Reports Server (NTRS)

Saks, Victor; Johnson, Ivan

1994-01-01

This paper presents an overview of a Decision Support System (DSS) that incorporates Knowledge-Based (KB) and commercial off the shelf (COTS) technology components. The Knowledge-Based Logistics Planning Shell (KBLPS) is a state-of-the-art DSS with an interactive map-oriented graphics user interface and powerful underlying planning algorithms. KBLPS was designed and implemented to support skilled Army logisticians to prepare and evaluate logistics plans rapidly, in order to support corps-level battle scenarios. KBLPS represents a substantial advance in graphical interactive planning tools, with the inclusion of intelligent planning algorithms that provide a powerful adjunct to the planning skills of commodity distribution planners.

The Air Force Needs to Improve Cost-Effectiveness and Availability of the Joint Surveillance Target Attack Radar System (Redacted)

DTIC Science & Technology

2016-11-01

Target Attack Radar System Objective We determined whether the Air Force made cost-effective purchases on the performance-based logistics contract to... contract to Northrop Grumman Corporation to provide Total System Support Responsibility services to sustain 16 E-8C JSTARS aircraft. These services...customer support. The Total System Support Responsibility contract is valued at $7 billion, with a 6-year base period and 16 annual contract option

Strategic and Operational Considerations for the Implementation of Performance Based Logistics (PBL) Within the Japan Maritime Self Defense Force

DTIC Science & Technology

2010-06-01

logistics in support of weapon systems (D-2004-110). Washington, DC: Young , S. R. Keating , S., & Huff, K. (2005). Managing risk in the new supply chain...implementing PBL ( Keating & Huff, 2005; Reeve, 2001). Cohen (2007) found that cost-sharing support and maintenance services can generate "up to seven times as...to suppliers (Cohen, 2007; Keating & Huff, 2005); therefore, suppliers demand a risk premium (Cohen, & Nines, 2008). The degree of risk

Space Station logistic support by Aries

NASA Astrophysics Data System (ADS)

Cougnet, C.; Groepper, P.

1987-10-01

The architecture and functions of Aries, a low-cost expendable vehicle, are discussed. The Aries design is based on the Ariane 5 L5 and VEB. The major components of Aries are upgraded L5 and VEB and a payload adaptor; the design and operations of these components are described. The avionics and propulsion system for Aries are examined. Aries is to be employed for logistic support, assembly, and the placement of satellites. An example of a mission scenario and diagrams of Aries are provided.

Avionics Reliability, Its Techniques and Related Disciplines.

DTIC Science & Technology

1979-10-01

USAF F-16s. C.J.P.Haynes, UK You said that if one of the 5 nations consumes more than its fair share of the combined spares pool then the item manager ... MANAGEMENT OF THE AVIONIC SYSTEM OF A MILITARY STRIKE AIRCRAFT by A.P.White and J.D.Pavier 29 SESSION IV - SOFTWARE RELIABILITY’ INTRODUCTION TO...ASPECT by D.J.Harris 37 SESSION V - AVIONICS LOGISTICS SUPPORT ASPECTS INTEGRATED LOGISTICS SUPPORT ADDS ANOTHER DIMENSION TO MATRIX MANAGEMENT by

The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model

PubMed Central

LIU, Tongzhu; SHEN, Aizong; HU, Xiaojian; TONG, Guixian; GU, Wei

2017-01-01

Background: We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. Methods: We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. Results: For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Conclusion: Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers. PMID:28828316

77 FR 27202 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

... includes: Electronic Warfare Systems, Command, Control, Communication, Computers and Intelligence/Communication, Navigational and Identifications (C4I/CNI), Autonomic Logistics Global Support System (ALGS... Systems, Command, Control, Communication, Computers and Intelligence/Communication, Navigational and...

Lunar and Planetary Bases, Habitats, and Colonies

NASA Technical Reports Server (NTRS)

2004-01-01

This special bibliography includes the design and construction of lunar and Mars bases, habitats, and settlements; construction materials and equipment; life support systems; base operations and logistics; thermal management and power systems; and robotic systems.

Space Operations Center system analysis. Volume 3, book 2: SOC system definition report, revision A

NASA Technical Reports Server (NTRS)

1982-01-01

The Space Operations Center (SOC) orbital space station program operations are described. A work breakdown structure for the general purpose support equipment, construction and transportation support, and resupply and logistics support systems is given. The basis for the design of each element is presented, and a mass estimate for each element supplied. The SOC build-up operation, construction, flight support, and satellite servicing operations are described. Detailed programmatics and cost analysis are presented.

Interplanetary Supply Chain Risk Management

NASA Technical Reports Server (NTRS)

Galluzzi, Michael C.

2018-01-01

Emphasis on KSC ground processing operations, reduced spares up-mass lift requirements and campaign-level flexible path perspective for space systems support as Regolith-based ISM is achieved by; Network modeling for sequencing space logistics and in-space logistics nodal positioning to include feedstock. Economic modeling to assess ISM 3D printing adaption and supply chain risk.

The imperative for stronger vaccine supply and logistics systems.

PubMed

Zaffran, Michel; Vandelaer, Jos; Kristensen, Debra; Melgaard, Bjørn; Yadav, Prashant; Antwi-Agyei, K O; Lasher, Heidi

2013-04-18

With the introduction of new vaccines, developing countries are facing serious challenges in their vaccine supply and logistics systems. Storage capacity bottlenecks occur at national, regional, and district levels and system inefficiencies threaten vaccine access, availability, and quality. As countries adopt newer and more expensive vaccines and attempt to reach people at different ages and in new settings, their logistics systems must be strengthened and optimized. As a first step, national governments, donors, and international agencies have crafted a global vision for 2020 vaccine supply and logistics systems with detailed plans of action to achieve five priority objectives. Vaccine products and packaging are designed to meet the needs of developing countries. Immunization supply systems support efficient and effective vaccine delivery. The environmental impact of energy, materials, and processes used in immunization systems is minimized. Immunization information systems enable better and more timely decision-making. Competent and motivated personnel are empowered to handle immunization supply chain issues. Over the next decade, vaccine supply and logistics systems in nearly all developing countries will require significant investments of time and resources from global and national partners, donors, and governments. These investments are critical if we are to reach more people with current and newer vaccines. Copyright © 2012 Elsevier Ltd. All rights reserved.

Developing a Logistics Data Process for Support Equipment for NASA Ground Operations

NASA Technical Reports Server (NTRS)

Chakrabarti, Suman

2010-01-01

The United States NASA Space Shuttle has long been considered an extremely capable yet relatively expensive rocket. A great part of the roughly US $500 million per launch expense was the support footprint: refurbishment and maintenance of the space shuttle system, together with the long list of resources required to support it, including personnel, tools, facilities, transport and support equipment. NASA determined to make its next rocket system with a smaller logistics footprint, and thereby more cost-effective and quicker turnaround. The logical solution was to adopt a standard Logistics Support Analysis (LSA) process based on GEIA-STD-0007 http://www.logisticsengineers.org/may09pres/GEIASTD0007DEXShortIntro.pdf which is the successor of MIL-STD-1388-2B widely used by U.S., NATO, and other world military services and industries. This approach is unprecedented at NASA: it is the first time a major program of programs, Project Constellation, is factoring logistics and supportability into design at many levels. This paper will focus on one of those levels NASA ground support equipment for the next generation of NASA rockets and on building a Logistics Support Analysis Record (LSAR) for developing and documenting a support solution and inventory of resources for. This LSAR is actually a standards-based database, containing analyses of the time and tools, personnel, facilities and support equipment required to assemble and integrate the stages and umbilicals of a rocket. This paper will cover building this database from scratch: including creating and importing a hierarchical bill of materials (BOM) from legacy data; identifying line-replaceable units (LRUs) of a given piece of equipment; analyzing reliability and maintainability of said LRUs; and therefore making an assessment back to design whether the support solution for a piece of equipment is too much work, i.e., too resource-intensive. If one must replace or inspect an LRU too much, perhaps a modification of the design of the equipment can make such operational effort unnecessary. Finally, this paper addresses processes of tying resources to a timeline of tasks performed in ground operations: this enables various overarching analyses, e.g., a summarization of all resources used for a given piece of equipment. Quality Control of data will also be discussed: importing and exporting data from product teams, including spreadsheets-todatabase or data exchange between databases.

A Lunar Surface System Supportability Technology Development Roadmap

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Struk, Peter M.; Taleghani, Barmac K.

2009-01-01

This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA's Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of "supportability", in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in a environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test & Verification, Maintenance & Repair, and Scavenging & Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set of technologies with widest possible capability and utility with a minimum impact on crew time and training and remain within the time and cost constraints of the Constellation program

A Lunar Surface System Supportability Technology Development Roadmap

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

2011-01-01

This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set of technologies with widest possible capability and utility with a minimum impact on crew time and training and remain within the time and cost constraints of the Constellation program.

Computer Support for Conducting Supportability Trade-Offs in a Team Setting

DTIC Science & Technology

1990-01-01

maintenance visits, and spares costs. To minimize the total system LCC, which includes both acquisition and support costs, a method for obtaining the...from different departments with a range of skills to work for a common goal is not an easy task. Ignoring the logistical concerns, a fundamental problem...maintenance visits, and spares costs. To minimize the total system LCC, which includes both acquisition and support costs, a method for obtaining the

Logistics of a Lunar Based Solar Power Satellite Scenario

NASA Technical Reports Server (NTRS)

Melissopoulos, Stefanos

1995-01-01

A logistics system comprised of two orbital stations for the support of a 500 GW space power satellite scenario in a geostationary orbit was investigated in this study. A subsystem mass model, a mass flow model and a life cycle cost model were developed. The results regarding logistics cost and burden rates show that the transportation cost contributed the most (96%) to the overall cost of the scenario. The orbital stations at a geostationary and at a lunar orbit contributed 4 % to that cost.

BLSS: a contribution to future life support.

PubMed

Skoog, A I

1984-01-01

For extended duration missions in space the supply of basic life-supporting ingredients represents a formidable logistics problem. Storage volume and launch weight of water, oxygen and food in a conventional non-regenerable life support system are directly proportional to the crew size and the length of the mission. In view of spacecraft payload limitations this will require that the carbon, or food, recycling loop, the third and final part in the life support system, be closed to further reduce logistics cost. This will be practical only if advanced life support systems can be developed in which metabolic waste products are regenerated and food is produced. Biological Life Support Systems (BLSS) satisfy the space station environmental control functions and close the food cycle. A Biological Life Support System has to be a balanced ecological system, biotechnical in nature and consisting of some combination of human beings, animals, plants and microorganisms integrated with mechanical and physico-chemical hardware. Numerous scientific space experiments have been delineated in recent years, the results of which are applicable to the support of BLSS concepts. Furthermore ecological life support systems have become subject to intensified studies and experiments both in the U.S. and the U.S.S.R. The Japanese have also conducted detailed preliminary studies. Dornier System has in recent years undertaken an effort to define requirements and concepts and to analyse the feasibility of BLSS for space applications. Analyses of the BLSS energy-mass relation have been performed, and the possibilities to influence it to achieve advantages for the BLSS (compared with physico-chemical systems) have been determined. The major problem areas which need immediate attention have been defined, and a programme for the development of BLSS has been proposed.

Medical Logistics Lessons Observed During Operations Enduring Freedom and Iraqi Freedom.

PubMed

Dole, Mark J; Kissane, Jonathan M

2016-01-01

Medical Logistics (MEDLOG) is a function of the Army's integrated System for Health that provides the medical products and specialized logistics services required to deliver health protection and care under all operational conditions. In unified land operations, MEDLOG is an inherent function of Health Service Support (HSS), which also includes casualty care and medical evacuation. This paper focuses on a few key lessons observed during Operations Enduring Freedom and Iraqi Freedom with direct implications for the support of HSS in future operations as envisioned in the Army Operating Concept and the Joint Concept for Health Services. It also examines a few key enablers that helped mitigate these challenges that are not yet fully acknowledged in Army Medical Department doctrine, policy, and planning.

Defense Logistics Agency Did Not Fully Implement the Business Enterprise Architecture Procure-to-Pay Business Process in the Enterprise Business System

DTIC Science & Technology

2014-10-28

change. Enterprise Business System In August 2000, DLA began developing its Enterprise Resource Planning ( ERP ) system by initiating the Business...the EBS core system. EBS became the ERP system solution supporting DLA nonenergy commodity activities. DLA subsequently enhanced its EBS...capabilities by adding SAP software that supported DLA Enterprise Operational Accounting, real property, and inventory management functions. As part of the

Automatic Ammunition Identification Technology Project. Ammunition Logistics Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weil, B.

1993-03-01

The Automatic Ammunition Identification Technology (AAIT) Project is an activity of the Robotics & Process Systems Division at the Oak Ridge National Laboratory (ORNL) for the US Army`s Project Manager-Ammunition Logistics (PM-AMMOLOG) at the Picatinny Arsenal in Picatinny, New Jersey. The project objective is to evaluate new two-dimensional bar code symbologies for potential use in ammunition logistics systems and automated reloading equipment. These new symbologies are a significant improvement over typical linear bar codes since machine-readable alphanumeric messages up to 2000 characters long are achievable. These compressed data symbologies are expected to significantly improve logistics and inventory management tasks andmore » permit automated feeding and handling of ammunition to weapon systems. The results will be increased throughout capability, better inventory control, reduction of human error, lower operation and support costs, and a more timely re-supply of various weapon systems. This paper will describe the capabilities of existing compressed data symbologies and the symbol testing activities being conducted at ORNL for the AAIT Project.« less

A technique for determining viable military logistics support alternatives

NASA Astrophysics Data System (ADS)

Hester, Jesse Stuart

A look at today's US military will see them operating much beyond the scope of protecting and defending the United States. These operations now consist of, but are not limited to humanitarian aid, disaster relief, peace keeping, and conflict resolution. This broad spectrum of operational environments has necessitated a transformation of the individual military services to a hybrid force that is attempting to leverage the inherent and emerging capabilities and strengths of all those under the umbrella of the Department of Defense (DOD), this concept has been coined Joint Operations. Supporting Joint Operations requires a new approach to determining a viable military logistics support system. The logistics architecture for these operations has to accommodate scale, time, varied mission objectives, and imperfect information. Compounding the problem is the human in the loop (HITL) decision maker (DM) who is a necessary component for quickly assessing and planning logistics support activities. Past outcomes are not necessarily good indicators of future results, but they can provide a reasonable starting point for planning and prediction of specific needs for future requirements. Adequately forecasting the necessary logistical support structure and commodities needed for any resource intensive environment has progressed well beyond stable demand assumptions to one in which dynamic and nonlinear environments can be captured with some degree of fidelity and accuracy. While these advances are important, a holistic approach that allows exploration of the operational environment or design space does not exist to guide the military logistician in a methodical way to support military forecasting activities. To bridge this capability gap, a method called Adaptive Technique for Logistics Architecture Solutions (ATLAS) has been developed. This method provides a process that facilitates the use of techniques and tools that filter and provide relevant information to the DM. By doing so, a justifiable course of action (COA) can be determined based on a variety of quantitative and qualitative information available. This thesis describes and applies the ATLAS method to a notional military scenario that involves the Navy concept of Seabasing and the Marine Corps concept of Distributed Operations applied to a platoon sized element. The small force is tasked to conduct deterrence and combat operations over a seven day period. This work uses modeling and simulation to incorporate expert opinion and knowledge of military operations, dynamic reasoning methods, and certainty analysis to create a decisions support system (DSS) that can be used to provide the DM an enhanced view of the logistics environment and uses variables that impact specific measures of effectiveness. The results from applying the ATLAS method provide a better understanding and ability for the DM to conduct the logistics planning/execution more efficiently and quickly. This is accomplished by providing relevant data that can be applied to perform dynamic forecasting activities for the platoon and aids in determining the necessary support architecture to fulfill the forecasted need.

Barriers to Fully Implementing Integrated Logistics Support (ILS) in System Acquisition as Perceived by ILS Managers and Program Managers at the Aeronautical Systems Division

DTIC Science & Technology

1982-09-01

is to structure, within Systems Engineering, a process to systematically pull together all the engineering functions that contribute to the design...staff and AiD ptple in the SPOs. There is not enough communication. The DPFL is pulled two ways. 160. Dual chain helps IWll get things done. 103 166...involvement from users, testers, and logisticians. I’d pull AFLC into the development early. On the A-X I wanted logistics inputs early, but it never happened

Stellar Inertial Navigation Workstation

NASA Technical Reports Server (NTRS)

Johnson, W.; Johnson, B.; Swaminathan, N.

1989-01-01

Software and hardware assembled to support specific engineering activities. Stellar Inertial Navigation Workstation (SINW) is integrated computer workstation providing systems and engineering support functions for Space Shuttle guidance and navigation-system logistics, repair, and procurement activities. Consists of personal-computer hardware, packaged software, and custom software integrated together into user-friendly, menu-driven system. Designed to operate on IBM PC XT. Applied in business and industry to develop similar workstations.

48 CFR 217.173 - Multiyear contracts for weapon systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... weapon systems. 217.173 Section 217.173 Federal Acquisition Regulations System DEFENSE ACQUISITION... Mulityear Contracting 217.173 Multiyear contracts for weapon systems. As authorized by 10 U.S.C. 2306b(h... contract for— (a) A weapon system and associated items, services, and logistics support for a weapon system...

Computer-Aided Acquisition and Logistic Support Gateway Development

DTIC Science & Technology

1989-09-01

The initial step integrates the current vendor interfaces (Paperless Order Processing System (POPS) and SAMXIMS Procurement by Electronic Data Exchange...Paperless Order Processing System POSIX = Portable Operating System for UNIX RFQ = Request for Quotation RS-232C = The Electronics Industries

Space Operations Center System Analysis: Requirements for a Space Operations Center, revision A

NASA Technical Reports Server (NTRS)

Woodcock, G. R.

1982-01-01

The system and program requirements for a space operations center as defined by systems analysis studies are presented as a guide for future study and systems definition. Topics covered include general requirements for safety, maintainability, and reliability, service and habitat modules, the health maintenance facility; logistics modules; the docking tunnel; and subsystem requirements (structures, electrical power, environmental control/life support; extravehicular activity; data management; communications and tracking; docking/berthing; flight control/propulsion; and crew support). Facilities for flight support, construction, satellite and mission servicing, and fluid storage are included as well as general purpose support equipment.

77 FR 32598 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... engineering and logistics support services, and other related elements of logistics support. (iv) Military.... Government and contractor engineering and logistics support services, and other related elements of logistics... acceptable military balance in the area. The Republic of Korea (ROK) intends to use the HARPOON Block II...

The Columbus logistics support at the APMC: Requirements and implementation aspects

NASA Technical Reports Server (NTRS)

Canu, C.; Battocchio, L.; Masullo, S.

1993-01-01

This paper focuses on the logistics support to be provided by the APM Center (APMC). Among the Columbus ground infrastructures, this center is tasked to provide logistics, sustaining engineering and P/L integration support to the ongoing missions of the APM, i.e. the Columbus Laboratory attached to the Freedom Space Station. The following is illustrated: an analysis of the requirements that are levied on the logistics support of the APM; how such requirements are reflected in the corresponding support to be available on-ground and at APMC; the functional components of the APMC logistics support and how such components interact each other; how the logistics support function interfaces with the other functions of the ground support; and how the logistics support is being designed in terms of resources (such as hardware, data bases, etc.). Emphasis is given to the data handling aspects and to the related data bases that will constitute for the logistics activities the fundamental source of information during the APM planned lifetime. Functional and physical architectures, together with trades for possible implementation, are addressed. Commonalities with other centers are taken into account and recommendations are made for possible reuse of tools already developed in the C/D phase. Finally, programmatic considerations are discussed for the actual implementation of the center.

ISS Logistics Hardware Disposition and Metrics Validation

NASA Technical Reports Server (NTRS)

Rogers, Toneka R.

2010-01-01

I was assigned to the Logistics Division of the International Space Station (ISS)/Spacecraft Processing Directorate. The Division consists of eight NASA engineers and specialists that oversee the logistics portion of the Checkout, Assembly, and Payload Processing Services (CAPPS) contract. Boeing, their sub-contractors and the Boeing Prime contract out of Johnson Space Center, provide the Integrated Logistics Support for the ISS activities at Kennedy Space Center. Essentially they ensure that spares are available to support flight hardware processing and the associated ground support equipment (GSE). Boeing maintains a Depot for electrical, mechanical and structural modifications and/or repair capability as required. My assigned task was to learn project management techniques utilized by NASA and its' contractors to provide an efficient and effective logistics support infrastructure to the ISS program. Within the Space Station Processing Facility (SSPF) I was exposed to Logistics support components, such as, the NASA Spacecraft Services Depot (NSSD) capabilities, Mission Processing tools, techniques and Warehouse support issues, required for integrating Space Station elements at the Kennedy Space Center. I also supported the identification of near-term ISS Hardware and Ground Support Equipment (GSE) candidates for excessing/disposition prior to October 2010; and the validation of several Logistics Metrics used by the contractor to measure logistics support effectiveness.

Secretary | Center for Cancer Research

Cancer.gov

The Basic Science Program (BSP) pursues independent, multidisciplinary research programs in basic or applied molecular biology, immunology, retrovirology, cancer biology, or human genetics. Research efforts and support are an integral part of the Center for Cancer Research (CCR) at the Frederick national Laboratory for Cancer Research (FNLCR). The BSP Office provides procurement and logistical assistance in support of the research activities of the Center for Cancer Research.KEY ROLES/RESPONSIBILITIES The Secretary III will: Provide heavy-volume procurement support to a large customer base of laboratory staff, both Leidos Biomed and CCR (gov’t), using blanket orders, purchase requisitions, credit card, and online warehouse system Data entry into appropriate financial system component (CostPoint, Cor360), status checks on orders, maintenance of orders log, reconciliation of credit card transactions, maintenance of electronic filing systems Providing logistical support for the facilitation of travel packages (both pre-travel and post travel) for Leidos Biomed employees, as well as the coordination of seminar speakers and subsequent reimbursements Composing and answering emails/correspondence Communicating with all levels of personnel, both verbally and in writing, to gather and clearly convey information

Never Losing Sight of Our Priorities. Fiscal Year 2010 Department of the Navy Annual Financial Report

DTIC Science & Technology

2010-01-01

our.war-fighting capabilities. We rely too heavily on fossil fuels, leaving us vulnerable to price and supply shocks. In FYlO, I issued five energy...submersibles participated in recovery efforts. The Navy sustained logistical support, equipment and assistance in skimming and salvage operations...Naval Sea Systems Command sent 66,000 feet of inflatable oil boom, skimming systems, related support equipment, and personnel to support clean-up

Haughton-Mars Project Expedition 2005

NASA Technical Reports Server (NTRS)

deWeck, Olivier; Simchi-Levi, David

2006-01-01

The 2005 expedition to the Haughton-Mars Project (HMP) research station on Devon Island was part of a NASA-funded project on Space Logistics. A team of nine r&searchers from MIT went to the Canadian Arctic to participate in the annual I-IMP field campaign from July 8 to August 12, 2005. We investigated the applicability of the HMP research station as an analogue for planetary macro- and micro-logistics to the Moon and Mars, and began collecting data for modeling purposes. We also tested new technologies and procedures to enhance the ability of humans and robots to jointly explore remote environments. The expedition had four main objectives. We briefly summarize our key findings in each of these areas. 1. Classes of Supply: First, we wanted to understand what supply items existed at the HMP research station in support of planetary science and exploration research at and around the Haughton Crater. We also wanted to quantify the total amount of imported mass at HMP and compare this with predictions from existing parametric lunar base demand models. 2. Macro-Logistics Transportation Network: Our second objective was to understand the nodes, transportation routes, vehicles, capacities and crew and cargo mass flow rates required to support the HMP logistics network. 3. Agent and Asset Tracking: Since the current inventory management system on ISS relies heavily on barcodes and manual tracking, we wanted to test new automated technologies and procedures such as radio frequency identification RFID) to support exploration logistics. 4. Micro-Logistics (EVA): Finally, we wanted to understand the micro-logistical requirements of conducting both short (<1 day) and long traverses in the Mars-analog terrain on Devon Island. Micro-logistics involves the movement of surface vehicles, people and supplies from base to various exploration sites over short distances (<100 km).

A Big Bang versus a Small Bang Approach: A Case Study of the Expeditionary Combat Support System (ECSS) and the Maintenance, Repair, and Overhaul Initiative (MROi)

DTIC Science & Technology

resource planning (ERP) solution called the Expeditionary Combat Support System (ECSS), a big - bang approach. In early 2012, the ECSS program was cancelled...Repair, and Overhaul initiative (MROi), a small- bang approach, to increase enterprise visibility and efficiency across all three Air Logistics

Android platform based smartphones for a logistical remote association repair framework.

PubMed

Lien, Shao-Fan; Wang, Chun-Chieh; Su, Juhng-Perng; Chen, Hong-Ming; Wu, Chein-Hsing

2014-06-25

The maintenance of large-scale systems is an important issue for logistics support planning. In this paper, we developed a Logistical Remote Association Repair Framework (LRARF) to aid repairmen in keeping the system available. LRARF includes four subsystems: smart mobile phones, a Database Management System (DBMS), a Maintenance Support Center (MSC) and wireless networks. The repairman uses smart mobile phones to capture QR-codes and the images of faulty circuit boards. The captured QR-codes and images are transmitted to the DBMS so the invalid modules can be recognized via the proposed algorithm. In this paper, the Linear Projective Transform (LPT) is employed for fast QR-code calibration. Moreover, the ANFIS-based data mining system is used for module identification and searching automatically for the maintenance manual corresponding to the invalid modules. The inputs of the ANFIS-based data mining system are the QR-codes and image features; the output is the module ID. DBMS also transmits the maintenance manual back to the maintenance staff. If modules are not recognizable, the repairmen and center engineers can obtain the relevant information about the invalid modules through live video. The experimental results validate the applicability of the Android-based platform in the recognition of invalid modules. In addition, the live video can also be recorded synchronously on the MSC for later use.

Lunar Commercial Mining Logistics

NASA Astrophysics Data System (ADS)

Kistler, Walter P.; Citron, Bob; Taylor, Thomas C.

2008-01-01

Innovative commercial logistics is required for supporting lunar resource recovery operations and assisting larger consortiums in lunar mining, base operations, camp consumables and the future commercial sales of propellant over the next 50 years. To assist in lowering overall development costs, ``reuse'' innovation is suggested in reusing modified LTS in-space hardware for use on the moon's surface, developing product lines for recovered gases, regolith construction materials, surface logistics services, and other services as they evolve, (Kistler, Citron and Taylor, 2005) Surface logistics architecture is designed to have sustainable growth over 50 years, financed by private sector partners and capable of cargo transportation in both directions in support of lunar development and resource recovery development. The author's perspective on the importance of logistics is based on five years experience at remote sites on Earth, where remote base supply chain logistics didn't always work, (Taylor, 1975a). The planning and control of the flow of goods and materials to and from the moon's surface may be the most complicated logistics challenges yet to be attempted. Affordability is tied to the innovation and ingenuity used to keep the transportation and surface operations costs as low as practical. Eleven innovations are proposed and discussed by an entrepreneurial commercial space startup team that has had success in introducing commercial space innovation and reducing the cost of space operations in the past. This logistics architecture offers NASA and other exploring nations a commercial alternative for non-essential cargo. Five transportation technologies and eleven surface innovations create the logistics transportation system discussed.

The Launch Processing System for Space Shuttle.

NASA Technical Reports Server (NTRS)

Springer, D. A.

1973-01-01

In order to reduce costs and accelerate vehicle turnaround, a single automated system will be developed to support shuttle launch site operations, replacing a multiplicity of systems used in previous programs. The Launch Processing System will provide real-time control, data analysis, and information display for the checkout, servicing, launch, landing, and refurbishment of the launch vehicles, payloads, and all ground support systems. It will also provide real-time and historical data retrieval for management and sustaining engineering (test records and procedures, logistics, configuration control, scheduling, etc.).

Supportability Challenges, Metrics, and Key Decisions for Future Human Spaceflight

NASA Technical Reports Server (NTRS)

Owens, Andrew C.; de Weck, Olivier L.; Stromgren, Chel; Cirillo, William; Goodliff, Kandyce

2017-01-01

Future crewed missions beyond Low Earth Orbit (LEO) represent a logistical challenge that is unprecedented in human space flight. Astronauts will travel farther and stay in space for longer than any previous mission, far from timely abort or resupply from Earth. Under these conditions, supportability { defined as the set of system characteristics that influence the logistics and support required to enable safe and effective operations of systems { will be a much more significant driver of space system lifecycle properties than it has been in the past. This paper presents an overview of supportability for future human space flight. The particular challenges of future missions are discussed, with the differences between past, present, and future missions highlighted. The relationship between supportability metrics and mission cost, performance, schedule, and risk is also discussed. A set of pro- posed strategies for managing supportability is presented (including reliability growth, uncertainty reduction, level of repair, commonality, redundancy, In-Space Manufacturing (ISM) (including the use of material recycling and In-Situ Resource Utilization (ISRU) for spares and maintenance items), reduced complexity, and spares inventory decisions such as the use of predeployed or cached spares - along with a discussion of the potential impacts of each of those strategies. References are provided to various sources that describe these supportability metrics and strategies, as well as associated modeling and optimization techniques, in greater detail. Overall, supportability is an emergent system characteristic and a holistic challenge for future system development. System designers and mission planners must carefully consider and balance the supportability metrics and decisions described in this paper in order to enable safe and effective beyond-LEO human space flight.

78 FR 54242 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

... elements of logistical and program support. The estimated cost is $1.2 billion. This proposed sale will... support services, and other related elements of logistical and program support. (iv) Military Department... logistical support to sustain the combat and operational readiness of its existing aircraft fleet. The...

ARES: A System for Real-Time Operational and Tactical Decision Support

DTIC Science & Technology

1986-12-01

In B]LE LCLGf. 9 NAVAL POSTGRADUATE SCHOOL Monterey, California Vi,-. %*.. THESIS - ’ A RE S A SYSTEM -OR REAL- 1I I .-.. --- OPERATIONAL AND...able) aval Postgraduate School 54 Naval Postgraduate School NN DRESS (City,. State,. and ZIP Code) 7b ADDRESS (City,. State,. and ZIP Code...SUBJECT TERMS (Continue on reverse if necessaty and identify by block number) LD GROUP SUB-GROUP Decision Support System, Logistics Model, Operational

Faces of Neglect.

ERIC Educational Resources Information Center

Dubin, Bettina Adelberg; And Others

The family is the primary source of support and caregiving for the frail, dependent elder, providing emotional support, logistical services, supplemental finances, and the link to the outside community for the homebound elder. The caregiving systems of 84 of Texas's Adult Protective Services' (APS) cases were examined. The definition of neglect…

Measuring Combat Logistics Force (CLF) Adequacy in Supporting Naval Operations

DTIC Science & Technology

2012-03-01

existing fuel consumption rates and the hotel services load. Because logistics planning factors for foreign carriers were not available, existing... LOGISTICS FORCE (CLF) ADEQUACY IN SUPPORTING NAVAL OPERATIONS by Philip J. Mock March 2012 Thesis Advisor: Wayne Hughes Second Reader...DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE Measuring Combat Logistics Force (CLF) Adequacy in Supporting Naval Operations 5. FUNDING

Aviation System Analysis Capability Quick Response System Report

NASA Technical Reports Server (NTRS)

Roberts, Eileen; Villani, James A.; Ritter, Paul

1998-01-01

The purpose of this document is to present the additions and modifications made to the Aviation System Analysis Capability (ASAC) Quick Response System (QRS) in FY 1997 in support of the ASAC ORS development effort. This document contains an overview of the project background and scope and defines the QRS. The document also presents an overview of the Logistics Management Institute (LMI) facility that supports the QRS, and it includes a summary of the planned additions to the QRS in FY 1998. The document has five appendices.

The role of the National Launch System in support of Space Station Freedom

NASA Technical Reports Server (NTRS)

Green, J. L.; Saucillo, R. J.; Cirillo, W. M.

1992-01-01

A study was performed to determine the most appropriate potential use of the National Launch System (NLS) for Space Station Freedom (SSF) logistics resupply and growth assembly needs. Objectives were to estimate earth-to-SSF cargo requirements, identify NLS sizing trades, and assess operational constraints of a shuttle and NLS transportation infrastructure. Detailed NLS and Shuttle flight manifests were developed to model varying levels of NLS support. NLS delivery of SSF propellant, and in some cases, cryoenic fluids, yield significant shuttle flight savings with minimum impact to the baseline SSF design. Additional cargo can be delivered by the NLS if SSF trash disposal techniques are employed to limit return cargo requirements. A common vehicle performance level can be used for both logistics resupply and growth hardware delivery.

Performance-Based Logistics, Contractor Logistics Support, and Stryker

DTIC Science & Technology

2007-06-15

automotive , armament, missile, communications, special devices, and ground equipment repair. The essential maintenance task for the FMC is to maintain...technologies and welding techniques into their production processes. Finally, GDLS’s use of progressive management techniques and supply chain information...C4ISR, MEP) per the NMC criteria in the -10 manual, the contractors system only focuses on the platform or automotive status. Thus a vehicle “up” for

Policy Level Information on Logistics-Oriented Research.

DTIC Science & Technology

1980-08-01

Logistics Planann and System Long-Range Management Technology Planning Evaluation of Rold Miasion of Support Organizacion Effective Cross-Service Policies...guidelines, solution procedures, etc. The documentation format (technical report, user’s manual , briefing slides, etc.) also falls into this category...CHECK AT LEAST ONE) PhD Dissertation SMaster’s Thesis 7 Memorandum L Briefing Q Technical Report 7 Software Product O Hardware Product Q7 User’s Manual

Benefit Analysis Report, United States Air Force Technical Order Management Systems (AFTOMS)

DOT National Transportation Integrated Search

1989-08-01

This report prepared by the Transportation Systems Center (TSC) concludes an analysis of the Technical Order (TO) costs and benefits, which was originally undertaken as part of the US Air Force Computer-aided Acquisition and Logistics Support (CALS) ...

A decision support system for transportation infrastructure and supply chain system planning.

DOT National Transportation Integrated Search

2013-07-01

This project makes the results (models and methodology) of the research and development efforts on freight movement modeling (FMM) and supply chain design carried out by faculty at OSU and OU available to transportation and logistics professionals. A...

NASA Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Carter, David; Wetzel, Scott

2000-01-01

The NASA SLR Operational Center is responsible for: 1) NASA SLR network control, sustaining engineering, and logistics; 2) ILRS mission operations; and 3) ILRS and NASA SLR data operations. NASA SLR network control and sustaining engineering tasks include technical support, daily system performance monitoring, system scheduling, operator training, station status reporting, system relocation, logistics and support of the ILRS Networks and Engineering Working Group. These activities ensure the NASA SLR systems are meeting ILRS and NASA mission support requirements. ILRS mission operations tasks include mission planning, mission analysis, mission coordination, development of mission support plans, and support of the ILRS Missions Working Group. These activities ensure than new mission and campaign requirements are coordinated with the ILRS. Global Normal Points (NP) data, NASA SLR FullRate (FR) data, and satellite predictions are managed as part of data operations. Part of this operation includes supporting the ILRS Data Formats and Procedures Working Group. Global NP data operations consist of receipt, format and data integrity verification, archiving and merging. This activity culminates in the daily electronic transmission of NP files to the CDDIS. Currently of all these functions are automated. However, to ensure the timely and accurate flow of data, regular monitoring and maintenance of the operational software systems, computer systems and computer networking are performed. Tracking statistics between the stations and the data centers are compared periodically to eliminate lost data. Future activities in this area include sub-daily (i.e., hourly) NP data management, more stringent data integrity tests, and automatic station notification of format and data integrity issues.

New machine-learning algorithms for prediction of Parkinson's disease

NASA Astrophysics Data System (ADS)

Mandal, Indrajit; Sairam, N.

2014-03-01

This article presents an enhanced prediction accuracy of diagnosis of Parkinson's disease (PD) to prevent the delay and misdiagnosis of patients using the proposed robust inference system. New machine-learning methods are proposed and performance comparisons are based on specificity, sensitivity, accuracy and other measurable parameters. The robust methods of treating Parkinson's disease (PD) includes sparse multinomial logistic regression, rotation forest ensemble with support vector machines and principal components analysis, artificial neural networks, boosting methods. A new ensemble method comprising of the Bayesian network optimised by Tabu search algorithm as classifier and Haar wavelets as projection filter is used for relevant feature selection and ranking. The highest accuracy obtained by linear logistic regression and sparse multinomial logistic regression is 100% and sensitivity, specificity of 0.983 and 0.996, respectively. All the experiments are conducted over 95% and 99% confidence levels and establish the results with corrected t-tests. This work shows a high degree of advancement in software reliability and quality of the computer-aided diagnosis system and experimentally shows best results with supportive statistical inference.

A logistics and potential hazard study of propellant systems for a Saturn 5 derived heavy lift (three-stage core) launch vehicle

NASA Technical Reports Server (NTRS)

Whitney, E. Dow

1992-01-01

The Bush Administration has directed NASA to prepare for a return to the Moon and on to Mars - the Space Exploration Initiative. To meet this directive, powerful rocket boosters will be required in order to lift payloads that may reach the half-million pound range into low earth orbit. In this report an analysis is presented on logistics and potential hazards of the propellant systems envisioned for future Saturn 5 derived heavy lift launch vehicles. In discussing propellant logistics, particular attention has been given to possible problems associated with procurement, transportation, and storage of RP-1, HL2, and LOX, the heavy lift launch vehicle propellants. Current LOX producing facilities will need to be expanded and propellant storage and some support facilities will require relocation if current Launch Pads 39A and/or 39B are to be used for future heavy noise-abatement measures. Included in the report is a discussion of suggested additional studies, primarily economic and environmental, which should be undertaken in support of the goals of the Space Exploration Initiative.

78 FR 59342 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-26

... related elements of logistical and program support. (iv) Military Department: Air Force (QAI) (v) Prior... contractor engineering, technical and logistics support services, and other related elements of logistical and program support. The estimated cost is $60 million. This proposed sale will contribute to the...

Storage Information Management System (SIMS) Spaceflight Hardware Warehousing at Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Kubicko, Richard M.; Bingham, Lindy

1995-01-01

Goddard Space Flight Center (GSFC) on site and leased warehouses contain thousands of items of ground support equipment (GSE) and flight hardware including spacecraft, scaffolding, computer racks, stands, holding fixtures, test equipment, spares, etc. The control of these warehouses, and the management, accountability, and control of the items within them, is accomplished by the Logistics Management Division. To facilitate this management and tracking effort, the Logistics and Transportation Management Branch, is developing a system to provide warehouse personnel, property owners, and managers with storage and inventory information. This paper will describe that PC-based system and address how it will improve GSFC warehouse and storage management.

STARS - Supportability Trend Analysis and Reporting System for the National Space Transportation System

NASA Technical Reports Server (NTRS)

Graham, Leroy J.; Doempke, Gerald T.

1990-01-01

The concept, implementation, and long-range goals of a Supportability Trend Analysis and Reporting System (STARS) for the National Space Transportation System (NSTS) are discussed. The requirement was established as a direct result of the recommendations of the Rogers Commission investigation of the circumstances of the Space Shuttle Challenger accident. STARS outlines the requirements for the supportability-trend data collection, analysis, and reporting requirements that each of the project offices supporting the Space Shuttle are required to provide to the NSTS program office. STARS data give the historic and predictive logistics information necessary for all levels of NSTS management to make safe and cost-effective decisions concerning the smooth flow of Space Shuttle turnaround.

Android Platform Based Smartphones for a Logistical Remote Association Repair Framework

PubMed Central

Lien, Shao-Fan; Wang, Chun-Chieh; Su, Juhng-Perng; Chen, Hong-Ming; Wu, Chein-Hsing

2014-01-01

The maintenance of large-scale systems is an important issue for logistics support planning. In this paper, we developed a Logistical Remote Association Repair Framework (LRARF) to aid repairmen in keeping the system available. LRARF includes four subsystems: smart mobile phones, a Database Management System (DBMS), a Maintenance Support Center (MSC) and wireless networks. The repairman uses smart mobile phones to capture QR-codes and the images of faulty circuit boards. The captured QR-codes and images are transmitted to the DBMS so the invalid modules can be recognized via the proposed algorithm. In this paper, the Linear Projective Transform (LPT) is employed for fast QR-code calibration. Moreover, the ANFIS-based data mining system is used for module identification and searching automatically for the maintenance manual corresponding to the invalid modules. The inputs of the ANFIS-based data mining system are the QR-codes and image features; the output is the module ID. DBMS also transmits the maintenance manual back to the maintenance staff. If modules are not recognizable, the repairmen and center engineers can obtain the relevant information about the invalid modules through live video. The experimental results validate the applicability of the Android-based platform in the recognition of invalid modules. In addition, the live video can also be recorded synchronously on the MSC for later use. PMID:24967603

NASA Space Rocket Logistics Challenges

NASA Technical Reports Server (NTRS)

Neeley, James R.; Jones, James V.; Watson, Michael D.; Bramon, Christopher J.; Inman, Sharon K.; Tuttle, Loraine

2014-01-01

The Space Launch System (SLS) is the new NASA heavy lift launch vehicle and is scheduled for its first mission in 2017. The goal of the first mission, which will be uncrewed, is to demonstrate the integrated system performance of the SLS rocket and spacecraft before a crewed flight in 2021. SLS has many of the same logistics challenges as any other large scale program. Common logistics concerns for SLS include integration of discreet programs geographically separated, multiple prime contractors with distinct and different goals, schedule pressures and funding constraints. However, SLS also faces unique challenges. The new program is a confluence of new hardware and heritage, with heritage hardware constituting seventy-five percent of the program. This unique approach to design makes logistics concerns such as commonality especially problematic. Additionally, a very low manifest rate of one flight every four years makes logistics comparatively expensive. That, along with the SLS architecture being developed using a block upgrade evolutionary approach, exacerbates long-range planning for supportability considerations. These common and unique logistics challenges must be clearly identified and tackled to allow SLS to have a successful program. This paper will address the common and unique challenges facing the SLS programs, along with the analysis and decisions the NASA Logistics engineers are making to mitigate the threats posed by each.

First Annual Workshop on Space Operations Automation and Robotics (SOAR 87)

NASA Technical Reports Server (NTRS)

Griffin, Sandy (Editor)

1987-01-01

Several topics relative to automation and robotics technology are discussed. Automation of checkout, ground support, and logistics; automated software development; man-machine interfaces; neural networks; systems engineering and distributed/parallel processing architectures; and artificial intelligence/expert systems are among the topics covered.

How the Department of Transportation Supports the DOD

DTIC Science & Technology

2016-03-09

launch rocket system onto a railroad car in Avon Park , Florida, in prepa- ration to transport the system to Fort Stewart, Georgia, for annual...graduate of the Transportation Officer Basic Course, the Combined Logistics Captains Ca- reer Course, and the Command and General Staff Officers

32 CFR Appendix F to Part 651 - Glossary

Code of Federal Regulations, 2013 CFR

2013-07-01

.... ASA(AL&T) Assistant Secretary of the Army (Acquisition, Logistics, and Technology). ASA(FM) Assistant.../Cost Analysis. EICS Environmental Impact Computer System. EIFS Economic Impact Forecast System. EIS... Record of Non-Applicability. RSC Regional Support Command. S&T Science and Technology. SA Secretary of...

32 CFR Appendix F to Part 651 - Glossary

Code of Federal Regulations, 2012 CFR

2012-07-01

.... ASA(AL&T) Assistant Secretary of the Army (Acquisition, Logistics, and Technology). ASA(FM) Assistant.../Cost Analysis. EICS Environmental Impact Computer System. EIFS Economic Impact Forecast System. EIS... Record of Non-Applicability. RSC Regional Support Command. S&T Science and Technology. SA Secretary of...

32 CFR Appendix F to Part 651 - Glossary

Code of Federal Regulations, 2014 CFR

2014-07-01

.... ASA(AL&T) Assistant Secretary of the Army (Acquisition, Logistics, and Technology). ASA(FM) Assistant.../Cost Analysis. EICS Environmental Impact Computer System. EIFS Economic Impact Forecast System. EIS... Record of Non-Applicability. RSC Regional Support Command. S&T Science and Technology. SA Secretary of...

32 CFR 231.7 - Procedures-domestic credit unions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of logistical support and space arrangements may be made through the Secretary of the Military... improvements and restore the land to its original condition. (d) Use of space, logistical support, and military...) Logistical support. When available, custodial and janitorial services to include garbage disposal and outdoor...

32 CFR 231.7 - Procedures-domestic credit unions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of logistical support and space arrangements may be made through the Secretary of the Military... improvements and restore the land to its original condition. (d) Use of space, logistical support, and military...) Logistical support. When available, custodial and janitorial services to include garbage disposal and outdoor...

32 CFR 231.7 - Procedures-domestic credit unions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... of logistical support and space arrangements may be made through the Secretary of the Military... improvements and restore the land to its original condition. (d) Use of space, logistical support, and military...) Logistical support. When available, custodial and janitorial services to include garbage disposal and outdoor...

Improving iSC performance through outsourcing - Considerations for using third-party service providers to increase innovation, capacity and efficiency.

PubMed

Wright, Martin; Forster, Gary; Beale, John

2017-04-19

Development partners and donors have encouraged and incentivized governments in developing countries to explore ways of working with third-party service suppliers to reduce costs and increase service delivery capacity. The distribution of vaccines and medicines has for a long time shown demand for outsourcing but public health systems have struggled to develop the expertise and capital assets necessary to manage such ventures. Existing transport and logistics capacity within public health systems, in particular, is well documented as being insufficient to support existing, let alone future immunization needs. Today, a number of countries are contracting party logistics providers (3PLs) to supplement the in-house distribution operations of public health systems. This commentary reflects on recent, leading examples of outsourcing initiatives to address critical gaps in transport and logistics. Copyright © 2017. Published by Elsevier Ltd.

Supply Chain Engineering and the Use of a Supporting Knowledge Management Application

NASA Astrophysics Data System (ADS)

Laakmann, Frank

The future competition in markets will happen between logistics networks and no longer between enterprises. A new approach for supporting the engineering of logistics networks is developed by this research as a part of the Collaborative Research Centre (SFB) 559: "Modeling of Large Networks in Logistics" at the University of Dortmund together with the Fraunhofer-Institute of Material Flow and Logistics founded by Deutsche Forschungsgemeinschaft (DFG). Based on a reference model for logistics processes, the process chain model, a guideline for logistics engineers is developed to manage the different types of design tasks of logistics networks. The technical background of this solution is a collaborative knowledge management application. This paper will introduce how new Internet-based technologies support supply chain design projects.

USAF Aircraft Maintenance Officer Knowledge, Skills and Abilities and Commonalities among the Logistics Officer Corps

DTIC Science & Technology

2013-02-01

distribution managemen t operations to include managing cargo distribution functions such as receiving, inspecting, tracing, tracking, packaging, and...Production Management DE CDE ABCDEFG Scheduling DE ADEF ABCDEF T ie r 2 Flightline Operations E BDE Systems Engineering D ABDEG Table 19: 21R...logistics units/ elements and as members of general or executive s t affs in t he operating forces, supporting establishment, and joint staffs . They

An Introduction to an International Logistics Language.

DTIC Science & Technology

1982-09-01

cause difficulties for beginners as well as the professional in Systems and Logistics. 3. The author uses terms, acronyms, and abbreviations that are...guarantee flow guide flowchart fly -H focal fold had follow half Follow-on Support halfway follow-up handbook for handle force hang forecast hanger...surface flow (n)(v) - the direction of movement; to move in a con- tinuous speed flowchart (n) - a diagram which shows step by step procedures or

Defense Logistics Agency Computer-Aided Acquisition and Logistics Support Security Measures

DTIC Science & Technology

1989-09-29

sopisit ftre a nduate eiromensweaonsyte dt i vaiou mdi, nfrrngcls- having security features commensurate with today’s weapon system data in various media ...sections, ministrator that has completed an accredited three areas of improvement in security emphasis are APscrt orebfr htst a ecn deemed appropriate...May 1989, been in a hardcopy media and in accordance with Washington, D.C. specific contract clauses and FAR/DFAR. Through CALS, the Government shall

Hybrid Airships in Joint Logistics Over the Shore (JLOTS)

DTIC Science & Technology

2013-06-13

invaluable. Additionally, special thanks are extended to my small group and instructors Mr. Thomas Meara, Mr. Leo Verhaeg, Mr. Kenneth Szmed, and Dr...LHS Load Handling System LMSR Large, Medium Speed Roll-on/Roll-Off Ship LOC Lines of Communication LSV Logistics Support Vessel MEB Marine...that connected operations to a source of supply became known as Lines-of- Communication ( LOC ). Increasing the length of a LOC makes an army more

77 FR 53180 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-31

... logistical and program support. (iv) Military Department: Air Force (CCZ, Amd 7). (v) Prior Related Cases, if.... Government and contractor technical and logistics support services; and other related elements of logistical and program support. The estimated cost is $850 million. This proposed sale will contribute to the...

Logistics or patient care: which features do independent Finnish pharmacy owners prioritize in a strategic plan for future information technology systems?

PubMed

Westerling, Anna M; Haikala, Veikko E; Bell, J Simon; Airaksinen, Marja S

2010-01-01

To determine Finnish community pharmacy owners' requirements for the next generation of software systems. Descriptive, nonexperimental, cross-sectional study. Finland during December 2006. 308 independent pharmacy owners. Survey listing 126 features that could potentially be included in the new information technology (IT) system. The list was grouped into five categories: (1) drug information and patient counseling, (2) medication safety, (3) interprofessional collaboration, (4) pharmacy services, and (5) pharmacy internal processes. Perceived value of potential features for a new IT system. The survey was mailed to all independent pharmacy owners in Finland (n = 580; response rate 53% [n = 308]). Respondents gave priority to logistical functions and functions related to drug information and patient care. The highest rated individual features were tracking product expiry (rated as very or quite important by 100% of respondents), computerized drug-drug interaction screening (99%), an electronic version of the national pharmaceutical reference book (97%), and a checklist-type drug information database to assist patient counseling (95%). In addition to the high ranking for logistical features, Finnish pharmacy owners put a priority on support for cognitive pharmaceutical services in the next IT system. Although the importance of logistical functions is understandable, the owners demonstrated a commitment to strategic health policy goals when planning their business IT system.

32 CFR 231.10 - Financial institutions on DoD installations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... installations shall be provided logistic support as set forth in subpart A of this part. (vi) Military... financial services (to include in-store banking) requiring the outgrant of additional space or logistical... Logistics) (USD(AT&L)) shall monitor policies and procedures governing logistical support furnished to...

32 CFR 231.10 - Financial institutions on DoD installations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... installations shall be provided logistic support as set forth in subpart A of this part. (vi) Military... financial services (to include in-store banking) requiring the outgrant of additional space or logistical... Logistics) (USD(AT&L)) shall monitor policies and procedures governing logistical support furnished to...

32 CFR 231.10 - Financial institutions on DoD installations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... installations shall be provided logistic support as set forth in subpart A of this part. (vi) Military... financial services (to include in-store banking) requiring the outgrant of additional space or logistical... Logistics) (USD(AT&L)) shall monitor policies and procedures governing logistical support furnished to...

Unified Database Development Program. Final Report.

ERIC Educational Resources Information Center

Thomas, Everett L., Jr.; Deem, Robert N.

The objective of the unified database (UDB) program was to develop an automated information system that would be useful in the design, development, testing, and support of new Air Force aircraft weapon systems. Primary emphasis was on the development of: (1) a historical logistics data repository system to provide convenient and timely access to…

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 12: PEP data item descriptions

NASA Technical Reports Server (NTRS)

1979-01-01

Contractor information requirements necessary to support the power extension package project of the space shuttle program are specified for the following categories of data: project management; configuration management; systems engineering and test; manufacturing; reliability, quality assurance and safety; logistics; training; and operations.

Logistics Support Analysis Techniques Guide

DTIC Science & Technology

1985-03-15

LANGUAGE (DATA RECORDS) FORTRAN CDC 6600 D&V FSD P/D A H REMA-RKS: Program n-s-ists of F PLIATIffIONS, approx 4000 line of coding , 3 Safegard, AN/FSC... FORTRAN IV -EW-RAK9-- The model consz.sts of IT--k-LIC- I-U-0NS: approximately 367 lines of SiNCGARS, PERSHING II coding . %.’. ~ LSA TASK INTERFACE...system supported by Computer’ Systems Command. The current version of LADEN is coded totally in FORTRAN 󈧕 for virtual memory operating system

Logistics planning for phased programs.

NASA Technical Reports Server (NTRS)

Cook, W. H.

1973-01-01

It is pointed out that the proper and early integration of logistics planning into the phased program planning process will drastically reduce these logistics costs. Phased project planning is a phased approach to the planning, approval, and conduct of major research and development activity. A progressive build-up of knowledge of all aspects of the program is provided. Elements of logistics are discussed together with aspects of integrated logistics support, logistics program planning, and logistics activities for phased programs. Continuing logistics support can only be assured if there is a comprehensive sequential listing of all logistics activities tied to the program schedule and a real-time inventory of assets.

Design for improved maintenance of the fiber-optic cable system (As carried out in a concurrent engineering environment)

NASA Astrophysics Data System (ADS)

Tremoulet, P. C.

The author describes a number of maintenance improvements in the Fiber Optic Cable System (FOCS). They were achieved during a production phase pilot concurrent engineering program. Listed in order of importance (saved maintenance time and material) by maintenance level, they are: (1) organizational level: improved fiber optic converter (FOC) BITE; (2) Intermediate level: reduced FOC adjustments from 20 to 2; partitioned FOC into electrical and optical parts; developed cost-effective fault isolation test points and test using standard test equipment; improved FOC chassis to have lower mean time to repair; and (3) depot level: revised test requirements documents (TRDs) for common automatic test equipment and incorporated ATE testability into circuit and assemblies and application-specific integrated circuits. These improvements met this contract's tailored logistics MIL-STD 1388-1A requirements of monitoring the design for supportability and determining the most effective support equipment. Important logistics lessons learned while accomplishing these maintainability and supportability improvements on the pilot concurrent engineering program are also discussed.

A Discussion of Oxygen Recovery Definitions and Key Performance Parameters for Closed-Loop Atmosphere Revitalization Life Support Technology Development

NASA Technical Reports Server (NTRS)

Abney, Morgan B.; Perry, Jay L.

2016-01-01

Over the last 55 years, NASA has evolved life support for crewed space exploration vehicles from simple resupply during Project Mercury to the complex and highly integrated system of systems aboard the International Space Station. As NASA targets exploration destinations farther from low Earth orbit and mission durations of 500 to 1000 days, life support systems must evolve to meet new requirements. In addition to having more robust, reliable, and maintainable hardware, limiting resupply becomes critical for managing mission logistics and cost. Supplying a crew with the basics of food, water, and oxygen become more challenging as the destination ventures further from Earth. Aboard ISS the Atmosphere Revitalization Subsystem (ARS) supplies the crew's oxygen demand by electrolyzing water. This approach makes water a primary logistics commodity that must be managed carefully. Chemical reduction of metabolic carbon dioxide (CO2) provides a method of recycling oxygen thereby reducing the net ARS water demand and therefore minimizing logistics needs. Multiple methods have been proposed to achieve this recovery and have been reported in the literature. However, depending on the architecture and the technology approach, "oxygen recovery" can be defined in various ways. This discontinuity makes it difficult to compare technologies directly. In an effort to clarify community discussions of Oxygen Recovery, we propose specific definitions and describe the methodology used to arrive at those definitions. Additionally, we discuss key performance parameters for Oxygen Recovery technology development including challenges with comparisons to state-of-the-art.

Challenges and models in supporting logistics system design for dedicated-biomass-based bioenergy industry.

PubMed

Zhu, Xiaoyan; Li, Xueping; Yao, Qingzhu; Chen, Yuerong

2011-01-01

This paper analyzed the uniqueness and challenges in designing the logistics system for dedicated biomass-to-bioenergy industry, which differs from the other industries, due to the unique features of dedicated biomass (e.g., switchgrass) including its low bulk density, restrictions on harvesting season and frequency, content variation with time and circumambient conditions, weather effects, scattered distribution over a wide geographical area, and so on. To design it, this paper proposed a mixed integer linear programming model. It covered from planting and harvesting switchgrass to delivering to a biorefinery and included the residue handling, concentrating on integrating strategic decisions on the supply chain design and tactical decisions on the annual operation schedules. The present numerical examples verified the model and demonstrated its use in practice. This paper showed that the operations of the logistics system were significantly different for harvesting and non-harvesting seasons, and that under the well-designed biomass logistics system, the mass production with a steady and sufficient supply of biomass can increase the unit profit of bioenergy. The analytical model and practical methodology proposed in this paper will help realize the commercial production in biomass-to-bioenergy industry. Copyright © 2010 Elsevier Ltd. All rights reserved.

Planning for Follow-On Spare Part Support by the Naval Electronic Systems Command.

DTIC Science & Technology

1984-06-01

System Replenishment Spare Parts", by Edward J. Brost , Air Force Institute of Technology [17]_ The objective of this study was to determine the...Competition in the Acquisition of Replenishment Spare Parts, M.S. Thesis, Air Force Institute of Technology, WPAFB, Ohio, September 1983. 17. Brost ...Instruction 4000.6D, Integrated Logistic Support (ILS); policy and responsibilities. 21 July 1983. 20. Mr. George Hughes, NAVELEX Code 81234

Automatic Ammunition Identification Technology Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weil, B.

1993-01-01

The Automatic Ammunition Identification Technology (AAIT) Project is an activity of the Robotics Process Systems Division at the Oak Ridge National Laboratory (ORNL) for the US Army's Project Manager-Ammunition Logistics (PM-AMMOLOG) at the Picatinny Arsenal in Picatinny, New Jersey. The project objective is to evaluate new two-dimensional bar code symbologies for potential use in ammunition logistics systems and automated reloading equipment. These new symbologies are a significant improvement over typical linear bar codes since machine-readable alphanumeric messages up to 2000 characters long are achievable. These compressed data symbologies are expected to significantly improve logistics and inventory management tasks and permitmore » automated feeding and handling of ammunition to weapon systems. The results will be increased throughout capability, better inventory control, reduction of human error, lower operation and support costs, and a more timely re-supply of various weapon systems. This paper will describe the capabilities of existing compressed data symbologies and the symbol testing activities being conducted at ORNL for the AAIT Project.« less

Managing NASA's International Space Station Logistics and Maintenance Program

NASA Technical Reports Server (NTRS)

Butina, Anthony

2001-01-01

The International Space Station's Logistics and Maintenance program has had to develop new technologies and a management approach for both space and ground operations. The ISS will be a permanently manned orbiting vehicle that has no landing gear, no international borders, and no organizational lines - it is one Station that must be supported by one crew, 24 hours a day, 7 days a week, 365 days a year. It flies partially assembled for a number of years before it is finally completed in 2006. It has over 6,000 orbital replaceable units (ORU), and spare parts which number into the hundreds of thousands, from 127 major US vendors and 70 major international vendors. From conception to operation, the ISS requires a unique approach in all aspects of development and operations. Today the dream is coming true; hardware is flying and hardware is failing. The system has been put into place to support the Station for both space and ground operations. It started with the basic support concept developed for Department of Defense systems, and then it was tailored for the unique requirements of a manned space vehicle. Space logistics is a new concept that has wide reaching consequences for both space travel and life on Earth. This paper discusses what type of organization has been put into place to support both space and ground operations and discusses each element of that organization. In addition, some of the unique operations approaches this organization has had to develop is discussed.

Space shuttle program: Shuttle Avionics Integration Laboratory. Volume 7: Logistics management plan

NASA Technical Reports Server (NTRS)

1974-01-01

The logistics management plan for the shuttle avionics integration laboratory defines the organization, disciplines, and methodology for managing and controlling logistics support. Those elements requiring management include maintainability and reliability, maintenance planning, support and test equipment, supply support, transportation and handling, technical data, facilities, personnel and training, funding, and management data.

Associations between physical activity parenting practices and adolescent girls' self-perceptions and physical activity intentions.

PubMed

Sebire, Simon J; Haase, Anne M; Montgomery, Alan A; McNeill, Jade; Jago, Russ

2014-05-01

The current study investigated cross-sectional associations between maternal and paternal logistic and modeling physical activity support and the self-efficacy, self-esteem, and physical activity intentions of 11- to 12-year-old girls. 210 girls reported perceptions of maternal and paternal logistic and modeling support and their self-efficacy, self-esteem and intention to be physically active. Data were analyzed using multivariable regression models. Maternal logistic support was positively associated with participants' self-esteem, physical activity self-efficacy, and intention to be active. Maternal modeling was positively associated with self-efficacy. Paternal modeling was positively associated with self-esteem and self-efficacy but there was no evidence that paternal logistic support was associated with the psychosocial variables. Activity-related parenting practices were associated with psychosocial correlates of physical activity among adolescent girls. Logistic support from mothers, rather than modeling support or paternal support may be a particularly important target when designing interventions aimed at preventing the age-related decline in physical activity among girls.

Logistics Process Analysis ToolProcess Analysis Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

2008-03-31

LPAT is the resulting integrated system between ANL-developed Enhanced Logistics Intra Theater Support Tool (ELIST) sponsored by SDDC-TEA and the Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the process Anlysis Tool (PAT) which evolved into a stand=-along tool for detailed process analysis at a location. Combined with ELIST, an inter-installation logistics component was added to enable users to define large logistical agent-based models without having to program. PAT is the evolution of an ANL-developed software system called Fortmore » Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the Process Analysis Tool(PAT) which evolved into a stand-alone tool for detailed process analysis at a location (sponsored by the SDDC-TEA).« less

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed pre-processing supply system designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

David J. Muth, Jr.; Matthew H. Langholtz; Eric C. D. Tan

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advancesmore » in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to the conversion facility.« less

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed preprocessing supply system designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muth, jr., David J.; Langholtz, Matthew H.; Tan, Eric

2014-03-31

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advancesmore » in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to the conversion facility.« less

Support systems of the orbiting quarantine facility

NASA Technical Reports Server (NTRS)

1981-01-01

The physical support systems, the personnel management structure, and the contingency systems necessary to permit the Orbiting Quarantine Facility (OQF) to function as an integrated system are described. The interactions between the subsystems within the preassembled modules are illustrated. The Power Module generates and distributes electrical power throughout each of the four modules, stabilizes the OQF's attitude, and dissipates heat generated throughout the system. The Habitation Module is a multifunctional structure designed to monitor and control all aspects of the system's activities. The Logistics Module stores the supplies needed for 30 days of operation and provides storage for waste materials generated during the mission. The Laboratory Module contains the equipment necessary for executing the protocol, as well as an independent life support system.

Application of statistical distribution theory to launch-on-time for space construction logistic support

NASA Technical Reports Server (NTRS)

Morgenthaler, George W.

1989-01-01

The ability to launch-on-time and to send payloads into space has progressed dramatically since the days of the earliest missile and space programs. Causes for delay during launch, i.e., unplanned 'holds', are attributable to several sources: weather, range activities, vehicle conditions, human performance, etc. Recent developments in space program, particularly the need for highly reliable logistic support of space construction and the subsequent planned operation of space stations, large unmanned space structures, lunar and Mars bases, and the necessity of providing 'guaranteed' commercial launches have placed increased emphasis on understanding and mastering every aspect of launch vehicle operations. The Center of Space Construction has acquired historical launch vehicle data and is applying these data to the analysis of space launch vehicle logistic support of space construction. This analysis will include development of a better understanding of launch-on-time capability and simulation of required support systems for vehicle assembly and launch which are necessary to support national space program construction schedules. In this paper, the author presents actual launch data on unscheduled 'hold' distributions of various launch vehicles. The data have been supplied by industrial associate companies of the Center for Space Construction. The paper seeks to determine suitable probability models which describe these historical data and that can be used for several purposes such as: inputs to broader simulations of launch vehicle logistic space construction support processes and the determination of which launch operations sources cause the majority of the unscheduled 'holds', and hence to suggest changes which might improve launch-on-time. In particular, the paper investigates the ability of a compound distribution probability model to fit actual data, versus alternative models, and recommends the most productive avenues for future statistical work.

The challenge of logistics facilities development

NASA Technical Reports Server (NTRS)

Davis, James R.

1987-01-01

The paper discusses the experiences of a group of engineers and logisticians at John F. Kennedy Space center in the design, construction and activation of a consolidated logistics facility for support of Space Transportation System ground operations and maintenance. The planning, methodology and processes are covered, with emphasis placed on unique aspects and lessons learned. The project utilized a progressive design, baseline and build concept for each phase of construction, with the Government exercising funding and configuration oversight.

Integrated Logistics Guide. Second Edition

DTIC Science & Technology

1994-06-14

FORMER FACULTY DEPARTMENT CHAIRMAN MR. JOHN RIFFEE MR. JOEL MANARY CDR DALE IMMEL, USN COL SHAROLYN HAYES, USA LT COL RICHARD EZZELL , USAF DSMC LOGISTICS...Compliance with the requirement by program management should depict of DoDI 5000.2, Part 7A, to establish an ILS the most essential support program mile ...system level fac- tors and the performance of readiness simu- 3.4 SUMMARY lations. e Initial LSA activities prior to Mile - 3.5 REFERENCES stone 0 and

A Critical Analysis of the U.S. Marine Corps 04XX Logistics Community

DTIC Science & Technology

2013-04-15

logistics community. Study .!Manuscript c. PAGE COUNT d . SUBJECT AREA 221 An examination of the training and readiness of a specific military...occupational field. 2. AUTHOR/SPEAKER e. NA M E (LasT. First. M iddle lnhia/J b . RANK c . T ITLE Lathers, Jolm, D. GS-12 Instructional Systems/ Training ...Specialist d. OFFICE e. AGENCY Marine Corps Combat Service Support Schools DoD, DoN, USMC, TECOM, Ground Training Branch 3 . PRESENTATION/ PUBLICA

Designing for Maintainability and System Availability

NASA Technical Reports Server (NTRS)

Lalli, Vincent R.; Packard, Michael H.

1997-01-01

The final goal for a delivered system (whether a car, aircraft, avionics box or computer) should be its availability to operate and perform its intended function over its expected design life. Hence, in designing a system, we cannot think in terms of delivering the system and just walking away. The system supplier needs to provide support throughout the operating life of the product. Here, supportability requires an effective combination of reliability, maintainability, logistics and operations engineering (as well as safety engineering) to have a system that is available for its intended use throughout its designated mission lifetime. Maintainability is a key driving element in the effective support and upkeep of the system as well as providing the ability to modify and upgrade the system throughout its lifetime. This paper then, will concentrate on maintainability and its integration into the system engineering and design process. The topics to be covered include elements of maintainability, the total cost of ownership, how system availability, maintenance and logistics costs and spare parts cost effect the overall program costs. System analysis and maintainability will show how maintainability fits into the overall systems approach to project development. Maintainability processes and documents will focus on how maintainability is to be performed and what documents are typically generated for a large scale program. Maintainability analysis shows how trade-offs can be performed for various alternative components. The conclusions summarize the paper and are followed by specific problems for hands-on training.

Accounting for Epistemic Uncertainty in Mission Supportability Assessment: A Necessary Step in Understanding Risk and Logistics Requirements

NASA Technical Reports Server (NTRS)

Owens, Andrew; De Weck, Olivier L.; Stromgren, Chel; Goodliff, Kandyce; Cirillo, William

2017-01-01

Future crewed missions to Mars present a maintenance logistics challenge that is unprecedented in human spaceflight. Mission endurance – defined as the time between resupply opportunities – will be significantly longer than previous missions, and therefore logistics planning horizons are longer and the impact of uncertainty is magnified. Maintenance logistics forecasting typically assumes that component failure rates are deterministically known and uses them to represent aleatory uncertainty, or uncertainty that is inherent to the process being examined. However, failure rates cannot be directly measured; rather, they are estimated based on similarity to other components or statistical analysis of observed failures. As a result, epistemic uncertainty – that is, uncertainty in knowledge of the process – exists in failure rate estimates that must be accounted for. Analyses that neglect epistemic uncertainty tend to significantly underestimate risk. Epistemic uncertainty can be reduced via operational experience; for example, the International Space Station (ISS) failure rate estimates are refined using a Bayesian update process. However, design changes may re-introduce epistemic uncertainty. Thus, there is a tradeoff between changing a design to reduce failure rates and operating a fixed design to reduce uncertainty. This paper examines the impact of epistemic uncertainty on maintenance logistics requirements for future Mars missions, using data from the ISS Environmental Control and Life Support System (ECLS) as a baseline for a case study. Sensitivity analyses are performed to investigate the impact of variations in failure rate estimates and epistemic uncertainty on spares mass. The results of these analyses and their implications for future system design and mission planning are discussed.

Reducing Lifecycle Sustainment Costs

DTIC Science & Technology

2015-05-01

ahead of government systems – Specific O&S needs in government: depots, software centers, VAMOSC/ ERP interfaces Implications of ERP Systems...funding is not allocated for its implementation .  Technology Refresh often requires non-recurring engineering investment, but the Working Capital Funds...VAMOSC Systems – Cost and Software Data Reports (CSDRs) • Contractor Logistics Support Contracts • Includes subcontractor reporting – Effects of

76 FR 68429 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... documentation, U.S. Government and contractor engineering, technical, and logistics personnel support services, and other related elements of logistics support. (iv) Military Department: Navy (USMC) (SDH). (v.... Government and contractor engineering, technical, and logistics personnel [[Page 68432

United States Air Force Computer-Aided Acquisition and Logistics Support (CALS) Evolution of Computer Integrated Manufacturing (CIM) Technologies

DTIC Science & Technology

1988-11-01

Manufacturing System 22 4. Similar Parts Based Shape or Manufactuting Process 24 5. Projected Annual Unit Robot Sales and Installed Base Through 1992 30 6. U.S...effort needed to perform personnel, product design, marketing , and advertising, and finance tasks of the firm. Level III controls the resource...planning and accounting functions of the firm. Systems at this level support purchasing, accounts payable, accounts receivable, master scheduling and sales

Analysis of Operational Pace Versus Logistical Support Rate in the Ground Combat Element of a Marine Expeditionary Brigade

DTIC Science & Technology

2006-09-01

logistical resources necessary to sustain its movement toward assigned objectives while being supported by a CSSE in an expanding maneuver warfare...thesis defines a logistics process and develops a simulation where the GCE consumes logistical resources necessary to sustain its movement toward...the MAGTF is responsible for responding to the logistics needs of the MAGTF Ground Combat Element (GCE) in order to sustain its movement. Yet

Investigation of Bio-Regenerative Life Support and Trash-To-Gas Experiment on a 4 Month Mars Simulation Mission

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Poulet, Lucie; Hintze, Paul E.; Miles, John D.

2014-01-01

Future crewed missions to other planets or deep space locations will require regenerative Life Support Systems (LSS) as well as recycling processes for mission waste. Constant resupply of many commodity materials will not be a sustainable option for deep space missions, nor will storing trash on board a vehicle or at a lunar or Martian outpost. The habitable volume will decline as the volume of waste increases. A complete regenerative environmentally controlled life support system (ECLSS) on an extra-terrestrial outpost will likely include physico-chemical and biological technologies, such as bioreactors and greenhouse modules. Physico-chemical LSS do not enable food production and bio-regenerative LSS are not stable enough to be used alone in space. Mission waste that cannot be recycled into the bio-regenerative ECLSS can include excess food, food packaging, clothing, tape, urine and fecal waste. This waste will be sent to a system for converting the trash into the high value products. Two crew members on a 120 day Mars analog simulation, in collaboration with Kennedy Space Centers (KSC) Trash to Gas (TtG) project investigated a semi-closed loop system that treated non-edible biomass and other logistical waste for volume reduction and conversion into useful commodities. The purposes of this study are to show the how plant growth affects the amount of resources required by the habitat and how spent plant material can be recycled. Real-time data was sent to the reactor at KSC in Florida for replicating the analog mission waste for laboratory operation. This paper discusses the 120 day mission plant growth activity, logistical and plant waste management, power and water consumption effects of the plant and logistical waste, and potential energy conversion techniques using KSCs TtG reactor technology.

Investigation of Bio-Regenerative Life Support and Trash-to-Gas Experiment on a 4-Month Mars Simulation Mission

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Poulet, Lucie; Hintze, Paul E.; Miles, John D.

2014-01-01

Future crewed missions to other planets or deep space locations will require regenerative Life Support Systems (LSS) as well as recycling processes for mission waste. Constant resupply of many commodity materials will not be a sustainable option for deep space missions, nor will stowing trash on board a vehicle or at a lunar or Martian outpost. The habitable volume will decline as the volume of waste increases. A complete regenerative environmentally controlled life support system (ECLSS) on an extra-terrestrial outpost will likely include physico-chemical and biological technologies, such as bioreactors and greenhouse modules. Physico-chemical LSS do not enable food production and bio-regenerative LSS are not stable enough to be used alone in space. Mission waste that cannot be recycled into the bio-regenerative ECLSS can include excess food, food packaging, clothing, tape, urine and fecal waste. This waste will be sent to a system for converting the trash into high value products. Two crew members on a 120 day Mars analog simulation, in collaboration with Kennedy Space Centers (KSC) Trash to Gas (TtG) project investigated a semi-closed loop system that treated non-edible biomass and other logistical waste for volume reduction and conversion into useful commodities. The purpose of this study is to show how plant growth affects the amount of resources required by the habitat and how spent plant material can be recycled. Real-time data was sent to the reactor at KSC in Florida for replicating the analog mission waste for laboratory operation. This paper discusses the 120 day mission plant growth activity, logistical and plant waste management, power and water consumption effects of the plant and logistical waste, and potential energy conversion techniques using KSCs TtG technology.

Technical Support Task Report for the Modernization of Defense Logistics Standard Systems. Volume 3: Logistics Gateway Node Technical Specifications

DTIC Science & Technology

1991-05-01

or may not bypass the editing function. At present, editing rules beyond those required for translation have not been stipulated. 2When explicit... editing rules become defined, the editor at a site LGN may perform two levels of edit checking: warning, which would insert blanks or pass as submitted...position image transactions into a transaction set. This low-level edit checking is performed at the site LGN to reduce transmission costs and to

A Collection of Technical Studies Completed for the Computer-Aided Acquisition and Logistic Support (CALS) Program Fiscal Year 1988. Volume 1. Text, Security and Data Management

DTIC Science & Technology

1991-03-01

management methodologies claim to be "expert systems" with security intelligence built into them to I derive a body of both facts and speculative data ... Data Administration considerations . III -21 IV. ARTIFICIAL INTELLIGENCE . .. .. .. . .. IV - 1 A. Description of Technologies . . . . . .. IV - 1 1...as intelligent gateways, wide area networks, and distributed databases for the distribution of logistics products. The integrity of CALS data and the

Federal Logistics Information System (FLIS) Procedures Manual. Volume 3. Development and Maintenance of Item Logistics Data Tools.

DTIC Science & Technology

1995-01-01

Act and Regulations of Food Safety and index number or a foreign prototype number shall Inspection Service, USDA. consist of the basic name Dye followed...DYE, INDATHRENE BLUE GCD (c) In order to comply with USDA labeling DYE, PONTACYLE CARMINE requirements for meat and poultry food products, the 2B number...name actions will include a written justification which supports baker’ cthe request technically and procedurally. DLER’ S See CAP, FOOD See FIIG

76 FR 42119 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

.... Government and contractor engineering and logistics support services, and other related elements of logistics... documentation, U.S. Government and contractor engineering and logistics support services, and other related... range of adverse battlefield conditions. The hardware itself is Unclassified. The engineering design and...

A hybrid job-shop scheduling system

NASA Technical Reports Server (NTRS)

Hellingrath, Bernd; Robbach, Peter; Bayat-Sarmadi, Fahid; Marx, Andreas

1992-01-01

The intention of the scheduling system developed at the Fraunhofer-Institute for Material Flow and Logistics is the support of a scheduler working in a job-shop. Due to the existing requirements for a job-shop scheduling system the usage of flexible knowledge representation and processing techniques is necessary. Within this system the attempt was made to combine the advantages of symbolic AI-techniques with those of neural networks.

Impact of CALS on Electronic Publishing Systems and Users.

ERIC Educational Resources Information Center

Beazley, William G.

1990-01-01

The U.S. Department of Defense has begun using its buying power to enforce standards on the vendors and contractors of automatic data processing hardware and software. An example of this, the Computer-Aided Acquisition and Logistic Support (CALS) program, is described, and how it will affect electronic publishing systems is discussed. (five…

Logistics Response to the Industry 4.0: the Physical Internet

NASA Astrophysics Data System (ADS)

Maslarić, Marinko; Nikoličić, Svetlana; Mirčetić, Dejan

2016-11-01

Today's mankind and all human activities are constantly changing and evolving in response to changes in technology, social and economic environments and climate. Those changes drive a "new" way of manufacturing industry. That novelty could be described as the organization of production processes based on technology and devices autonomously communicating with each other along the value chain. Decision-makers have to address this novelty (usually named as Industry 4.0) and try to develop appropriate information systems, physical facilities, and different kind of technologies capable of meeting the future needs of economy. As a consequence, there is a need for new paradigms of the way freight is move, store, realize, and supply through the world (logistics system). One of the proposed solutions is the Physical Internet, concept of open global logistics system which completely redefines current supply chain configuration, business models, and value-creation patterns.However, further detailed research on this topic is much needed. This paper aims to provide a balanced review of the variety of views considered among professionals in the field of Physical Internet with the final aim to identify the biggest challenges (technological, societal, business paradigm) of proposed new logistics paradigm as a practical solution in supporting Industry 4.0.

Adaptive Rules In Emergent Logistics (ARIEL) An Agent-Based Analysis Environment to Study Adaptive Route-Finding Constantly Changing Road-Networks

DTIC Science & Technology

2003-06-01

my wife Karin, my daughter Jasmin and my son Jan for their support and huge patience. Without the security and support of a loving home, none of...contains the trucks, which are the only moveable objects in the system. In essence they provide functionality and cannot act themselves. The layer

Space Station overall management approach for operations

NASA Technical Reports Server (NTRS)

Paules, G.

1986-01-01

An Operations Management Concept developed by NASA for its Space Station Program is discussed. The operational goals, themes, and design principles established during program development are summarized. The major operations functions are described, including: space systems operations, user support operations, prelaunch/postlanding operations, logistics support operations, market research, and cost/financial management. Strategic, tactical, and execution levels of operational decision-making are defined.

LANDSAT-D Mission Operations Review (MOR)

NASA Technical Reports Server (NTRS)

1982-01-01

Portions of the LANDSAT-D systems operation plan are presented. An overview of the data processing operations, logistics and other operations support, prelaunch and post-launch activities, thematic mapper operations during the scrounge period, and LANDSAT-D performance evaluation is given.

Missouri River freight corridor assessment & development plan.

DOT National Transportation Integrated Search

2011-09-01

The purpose of the Missouri River Freight Corridor Development effort is to redevelop the river as a freight corridor with logical market nodes and reliable service that supports a sustainable market and logistics system. Four focus areas have been i...

Expeditionary Logistics: How the Marine Corps Supports Its Expeditionary Operations

DTIC Science & Technology

2015-06-01

little additional information of value with regard to the U.S. Marine Corps and expeditionary logistics methodology. Since the expeditionary methodology...size and scope, necessitating differing levels of material support. Additionally , the same variables define the level of Combat Service Support that is...lie outside of doctrine and few manuals have been written discussing how the Marine Corps performs expeditionary logistics. Additionally , few sources

An extension of trust and TAM model with IDT in the adoption of the electronic logistics information system in HIS in the medical industry.

PubMed

Tung, Feng-Cheng; Chang, Su-Chao; Chou, Chi-Min

2008-05-01

Ever since National Health Insurance was introduced in 1995, the number of insurants increased to over 96% from 50 to 60%, with a continuous satisfaction rating of about 70%. However, the premium accounted for 5.77% of GDP in 2001 and the Bureau of National Health Insurance had pressing financial difficulties, so it reformed its expenditure systems, such as fee for service, capitation, case payment and the global budget system in order to control the rising medical costs. Since the change in health insurance policy, most hospitals attempted to reduce their operating expenses and improve efficiency. Introducing the electronic logistics information system is one way of reducing the cost of the department of central warehouse and the nursing stations. Hence, the study proposes a technology acceptance research model and examines how nurses' acceptance of the e-logistics information system has been affected in the medical industry. This research combines innovation diffusion theory, technology acceptance model and added two research parameters, trust and perceived financial cost to propose a new hybrid technology acceptance model. Taking Taiwan's medical industry as an experimental example, this paper studies nurses' acceptance of the electronic logistics information system. The structural equation modeling technique was used to evaluate the causal model and confirmatory factor analysis was performed to examine the reliability and validity of the measurement model. The results of the survey strongly support the new hybrid technology acceptance model in predicting nurses' intention to use the electronic logistics information system. The study shows that 'compatibility', 'perceived usefulness', 'perceived ease of use', and 'trust' all have great positive influence on 'behavioral intention to use'. On the other hand 'perceived financial cost' has great negative influence on behavioral intention to use.

Structured Analysis and Structured Design for the Logistic Support Analysis (LSA) Task 303 Evaluation of Alternatives and Trade-Off Analysis, LSA Subtask 303.2.2, Trade-Off Between Support System Alternatives and System/Equipment Alternatives

DTIC Science & Technology

1991-01-01

Field 3. Training and Training Devices: a. Factory training b. Instructor and key personnel training c. New equipment training plan d. New equipment...12345678901234567990123456789012345678901234567890123456789� 1. 0016 10 SUPPOR2AILITY ALTEIIIVE TRADE-OFF ANALISIS . 4. + 4" + 4. 4. 4 2. C1.0 111.0 N2.0 1.0 INITIATE

Space station operations task force. Panel 2 report: Ground operations and support systems

NASA Technical Reports Server (NTRS)

1987-01-01

The Ground Operations Concept embodied in this report provides for safe multi-user utilization of the Space Station, eases user integration, and gives users autonomy and flexibility. It provides for meaningful multi-national participation while protecting U.S. interests. The concept also supports continued space operations technology development by maintaining NASA expertise and enabling technology evolution. Given attention here are pre/post flight operations, logistics, sustaining engineering/configuration management, transportation services/rescue, and information systems and communication.

Improvement of logistics education from the point of view environmental management

NASA Astrophysics Data System (ADS)

Bányai, Á.

2009-04-01

The paper briefly presents the influence of environmental management on the improvement of the logistics education and research structure of the Department of Materials Handling and Logistics at the University of Miskolc, Hungary. The logistics, as an integrated science offers a very good possibility to demonstrate the effect of new innovative knowledge on the migration of the priorities of education and research of sciences. The importance of logistics in the field of recycling (or in wider sense in the field of environmental management) can be justified by the high proportion of logistic costs (as investment and operation costs) and these costs show that optimum logistic solutions are able to decrease the financial outcomes and lead to the establishment of a profitable system. Technological change constantly creates new demands on both education and research. The most important objective of the department is to create a unique logistics education in the country. For this reason the department offered up-to-date integrated knowledge at all level: undergraduate, master degree and PhD education. The integration of logistics means traditionally the joint use of technology of material handling, method of material flow, technology method of traffic, information technology, management sciences, production technology, marketing, market research, technology of services, mathematics and optimization, communication technology, system engineering, electronics and automation, mechatronics [1, 3]. The education and research portfolio of the department followed this tradition till 1993. The new lectures in the field of sustainability (logistics of recycling, logistics of quality management and recycling, closed loop economy, EU logistics or global logistics) became more and more important in the logistics education. The results of fast developments in closed loop economy, recycling, waste management, environmental protection are more and more used in the industry and this effected a revolutionary change in the education and research structure of logistics [2]. The European Community policy in the environment sectors aims at a high level of protection. Four principles were defined: the precautionary principle, the principle that preventive action should be taken, that environmental damages should as a priority be rectified at source and that the polluter should pay. All of these four principles have a very strong logistics background, especially in the field of import/export operations, traffic/transportation, inventory control, materials handling, fleet operations, customer service, supply chain management, distribution, strategic planning, warehousing, information systems of logistics, purchasing. These facts effect the development of different topics of logistics in each field of the education of the department: collection logistics of used products (especially WEEE), optimization of collection systems, design and control of disassembly systems, distribution of fractions of disassembled used products, design and control of recycling parks, possibilities of virtual networks in the field of recycling logistics, integration of logistics, recycling and total quality management, identification systems and recycling, etc. Within the framework of different supports our department has the opportunity to take part in European networks and research projects in the field of sustainability, environmental protection, recycling and closed loop economy. One of the biggest networks was developed within the framework of a Brite-Euram project entitled ‘Closing the loop from the product design to the end of life technologies'. The importance of logistics is certified by the fact, that this network defined the milestones of the improvement of an economically beneficial closed loop economy as quality aspects, communication and marketing, logistics and qualification. Within the frame of this project the logistics focused on the improvement of technologies (disassembly, reuse, refurbishment, remanufacturing and recycling), collection systems, and development of the concept for collection logistics and pre-disassembly, market survey in waste management. The Regional Knowledge Centre of Mechatronics and Logistics Systems was established in 2005. The overall objective of Knowledge Centre is to develop knowledge-intensive mechatronics and logistics systems in the leading edge of the world and to integrate the results in the economy and society through utilising the knowledge. The realisation of the objective requires the establishment and operation of a networking system of relations between those involved in sciences, the economy and society. The knowledge centre is a "knowledge integration tool" of the university in the field of mechanical engineering, and plays an important part in the intensification of the integration of the philosophy of sustainability into the related sciences. The program of the knowledge centre is focused on three well definable strategic fields, which are the vertical elements of the model. These are the R&D programs: world of products, materials and technologies, and integrated systems. The programs cover the implementation of seven, internationally competitive, application-oriented part tasks. These seven part tasks and the sustainability are closely related. The realisation of the part tasks through networking offers considerable results and economical-ecological benefits, forth for the participants and the region. The activities include basic and applied research, experimental development, technology transfer, as well as education and training and preparing the new scientific generation. The horizontal elements of the model are given by the utilisation of knowledge that can be interpreted in different dimensions: technical/engineering, legal, sustainability, economic, and social. The program relies on the continuation of existing relations in networks, and its regional nature is embodied in the cooperation of the higher education institutes and companies of the three counties. This publication was supported by the National Office for Research and Technology within the frame of Pázmány Péter programme. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author and do not necessarily reflect the views of the National Office for Research and Technology. Literature: [1] J. Cselényi, Gy. Fischer, J. Murvai, B. Mang: Typical models of the recycling logistics of worn out product. Proceedings of XIV. International Conference on Material Handling and Warehousing in Belgrade, 1996. pp. 138-143. [2] R. Knoth, M. Hoffmann, B. Kopacek, P. Kopacek: A logistic concept to improve the re-usability of electric and electronic equipment, Electronics and the Environment, 2001. Proceedings of the 2001 IEEE International Symposium. 2001. pp. 115 - 118. [3] L. Cser, B. Mang: Cleaner Technologies and Recycling in Hungary. Proceedings of Int. Workshop on Environmental Conscious Manufacturing in Hertogenbosch, The Netherlands, 1997. pp. 48-56.

Space shuttle operations at the NASA Kennedy Space Center: the role of emergency medicine

NASA Technical Reports Server (NTRS)

Rodenberg, H.; Myers, K. J.

1995-01-01

The Division of Emergency Medicine at the University of Florida coordinates a unique program with the NASA John F. Kennedy Space Center (KSC) to provide emergency medical support (EMS) for the United States Space Transportation System. This report outlines the organization of the KSC EMS system, training received by physicians providing medical support, logistic and operational aspects of the mission, and experiences of team members. The participation of emergency physicians in support of manned space flight represents another way that emergency physicians provide leadership in prehospital care and disaster management.

Space shuttle operations at the NASA Kennedy Space Center: the role of emergency medicine.

PubMed

Rodenberg, H; Myers, K J

1995-01-01

The Division of Emergency Medicine at the University of Florida coordinates a unique program with the NASA John F. Kennedy Space Center (KSC) to provide emergency medical support (EMS) for the United States Space Transportation System. This report outlines the organization of the KSC EMS system, training received by physicians providing medical support, logistic and operational aspects of the mission, and experiences of team members. The participation of emergency physicians in support of manned space flight represents another way that emergency physicians provide leadership in prehospital care and disaster management.

Air Mobility Command’s En Route Support Infrastructure: A Construct of Aircraft Type and Geographic Location Utilized to Assess En Route Aircraft Logistic Support

DTIC Science & Technology

2007-06-01

or JTF air mobility operations (AFDC, 2000). As stated in the following definition, the NAMS integrates the primary functions of airlift, air...control, and communications (C3), logistics support, and aerial port functions . The goal of the en route is to minimize delays for AMC mission...process. The resulting data was used to perform a statistical analysis of AMC off-station aircraft logistic support records for AMC’s six primary

Hubble Space Telescope - First Servicing Mission: Down to Earth Logistics - From GSFC to KSC and Back

NASA Technical Reports Server (NTRS)

Kubicko, Richard M.; Herrick, Robert

1995-01-01

The Hubble Space Telescope First Servicing Mission is a major accomplishment for NASA and has drawn world-wide attention and interest. The extravehicular servicing and repair activities performed by the STS-61 crew were the most ambitious ever undertaken. Their unprecedented success in performing on-orbit repair and maintenance, particularly in correcting the aberration in the primary mirror, has enabled the HST to provide sensational images and the anticipation of exciting scientific discoveries. Although the whole world watched the televised logistics activities (on-orbit maintenance) that took place in space, few are aware of the time and effort that went into planning and executing the space logistics that takes place with our feet on the ground. This paper addresses a major part of that effort - the packaging, handling, and transportation (PH&T) activities required to ship the GSFC HST space flight hardware and ground support equipment to KSC for launch and the post launch return to GSFC. It addresses the logistics and transportation planning for the containers for the Solar Array Carrier, the Orbital Replacement Unit Carrier, and the Flight Support System and their transporters, and the over land and water portions of the shipments.

Logistics in Security Force Assistance: Sustainable Partner Development

DTIC Science & Technology

2014-05-22

93Khuyen, 446. 94See Lieutenant General Joseph M. Heiser , Jr., CMH Pub 90-15, Logistic Support (Washington, DC: Center of Military History, U.S. Army...Government Printing Office, 2009. Heiser , Joseph M. Jr., Lieutenant General. CMH Pub 90-15, Logistic Support. Washington, DC: Center of Military

Corps Communications for the Airland Battle

DTIC Science & Technology

1985-04-01

intelligence , fire support. 111 wm mssemm vvw* m » ’■I.|J|.’■,■■*.■■.■ ■;■’!■». p i JL ■ .■.’.■, .■i». ■. ■ ■ ■. ■■ ■ ———-— im ^’ air de-fense...logistics support. The system must be flexible to support the pace of maneuver, it must have extensive range to support surveillance, intelligence and the...Command and Control, Intelligence , Fire Support, etc.) must be adjusted to correspond to the new mission. Communications assets must be allocated

Human Factor Investigation of Waste Processing System During the HI-SEAS 4 Month Mars Analog Mission in Support of NASA's Logistic Reduction and Repurposing Project: Trash to Gas

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Hintze, Paul; Miles, John D.

2014-01-01

NASAs Logistics Reduction and Repurposing (LRR) project is a collaborative effort in which NASA is tasked with reducing total logistical mass through reduction, reuse and recycling of various wastes and components of long duration space missions and habitats. Trash to Gas (TtG) is a sub task to LRR with efforts focused on development of a technology that converts wastes generated during long duration space missions into high-value products such as methane, water for life support, raw material production feedstocks, and other energy sources. The reuse of discarded materials is a critical component to reducing overall mission mass. The 120 day Hawaii Space Exploration and Analog Simulation provides a unique opportunity to answer questions regarding crew interface and system analysis for designing and developing future flight-like versions of a TtG system. This paper will discuss the human factors that would affect the design of a TtG or other waste processing systems. An overview of the habitat, utility usage, and waste storage and generation is given. Crew time spent preparing trash for TtG processing was recorded. Gas concentrations were measured near the waste storage locations and at other locations in the habitat. In parallel with the analog mission, experimental processing of waste materials in a TtG reactor was performed in order to evaluate performance with realistic waste materials.

Human Factor Investigation of Waste Processing System During the HI-SEAS 4-month Mars Analog Mission in Support of NASA's Logistic Reduction and Repurposing Project: Trash to Gas

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Hintze, Paul E.; Miles, John D.

2014-01-01

NASA's Logistics Reduction and Repurposing (LRR) project is a collaborative effort in which NASA is tasked with reducing total logistical mass through reduction, reuse and recycling of various wastes and components of long duration space missions and habitats. Trash to Gas (TtG) is a sub task to LRR with efforts focused on development of a technology that converts wastes generated during long duration space missions into high-value products such as methane, water for life support, raw material production feedstocks, and other energy sources. The reuse of discarded materials is a critical component to reducing overall mission mass. The 120 day Hawaii Space Exploration and Analog Simulation provides a unique opportunity to answer questions regarding crew interface and system analysis for designing and developing future flight-like versions of a TtG system. This paper will discuss the human factors that would affect the design of a TtG or other waste processing systems. An overview of the habitat, utility usage, and waste storage and generation is given. Crew time spent preparing trash for TtG processing was recorded. Gas concentrations were measured near the waste storage locations and at other locations in the habitat. In parallel with the analog mission, experimental processing of waste materials in a TtG reactor was performed in order to evaluate performance with realistic waste materials.

NASA Advanced Life Support Technology Testing and Development

NASA Technical Reports Server (NTRS)

Wheeler, Raymond M.

2012-01-01

Prior to 2010, NASA's advanced life support research and development was carried out primarily under the Exploration Life Support Project of NASA's Exploration Systems Mission Directorate. In 2011, the Exploration Life Support Project was merged with other projects covering Fire Prevention/Suppression, Radiation Protection, Advanced Environmental Monitoring and Control, and Thermal Control Systems. This consolidated project was called Life Support and Habitation Systems, which was managed under the Exploration Systems Mission Directorate. In 2012, NASA re-organized major directorates within the agency, which eliminated the Exploration Systems Mission Directorate and created the Office of the Chief Technologist (OCT). Life support research and development is currently conducted within the Office of the Chief Technologist, under the Next Generation Life Support Project, and within the Human Exploration Operation Missions Directorate under several Advanced Exploration System projects. These Advanced Exploration Systems projects include various themes of life support technology testing, including atmospheric management, water management, logistics and waste management, and habitation systems. Food crop testing is currently conducted as part of the Deep Space Habitation (DSH) project within the Advanced Exploration Systems Program. This testing is focused on growing salad crops that could supplement the crew's diet during near term missions.

Logistics Support for U.S. Perimeter and Portal Monitoring Sites in the Soviet Union

DTIC Science & Technology

1990-09-01

Interaction of Components. .................. 40 The U.S. National Defense Transportation System.......................52 DTS Description...53 Pros and Cons of Air, Motor Transport 54 Military Airlift Command ............ 56 iii Page Cost/Service Tradeoffs ... .......... . 59 Military...Traffic Management Command . . 59 The Soviet National Transportation System . 61 Transportation and the Economy ....... .. 63 Intermodal Comparison

Study of solid rocket motor for space shuttle booster, volume 2, book 3, appendix A

NASA Technical Reports Server (NTRS)

1972-01-01

A systems requirements analysis for the solid propellant rocket engine to be used with the space shuttle was conducted. The systems analysis was developed to define the physical and functional requirements for the systems and subsystems. The operations analysis was performed to identify the requirements of the various launch operations, mission operations, ground operations, and logistic and flight support concepts.

An Analysis of Test And Evaluation in Rapid Acquisition Programs

DTIC Science & Technology

2015-12-01

program manager is assigned the requirement and allocated resources to carry out with an acquisition plan. 2. Role of Test and Evaluation Test and...Manual, verify the Maintenance Allocation Chart, and ensure the completeness of the System Support Package. The Maintainability Demonstration measured...additional outside personnel that require additional logistics support, such as security, facilitates, and berthing placing additional strain on units. CLS

Defense Logistics Agency Support for Environmental Sustainability - Products and Services Supporting Environmental Requirements

DTIC Science & Technology

2011-05-12

SPONSOR/MONITOR’S REPORT NUMBER( S ) 12. DISTRIBUTION /AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY...Logistics Agency Support for Environmental Sustainability 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT...NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Defense Logistics Agency,Environmental Office,Fort

BLSS: A Contribution to Future Life Support

NASA Technical Reports Server (NTRS)

Skoog, A. I.

1985-01-01

The problem of the supply of basic life supporting ingredients was analyzed. Storage volume and launch weight of water, oxygen and food in a conventional nonregenerable life support system are directly proportional to the crew size and the length of the mission. Because of spacecraft payload limitations this requires that the carbon, or food, recycling loop, the third and final part in the life support system, be closed to further reduce logistics cost. Advanced life support systems need to be developed in which metabolic waste products are regenerated and food is produced. Biological life support systems (BLSS) satisfy the space station environmental control functions and close the food cycle. Numerous scientific space experiments were delineated, the results of which are applicable to the support of BLSS concepts. Requirements and concepts are defined and the feasibility of BLSS for space application are analyzed. The BLSS energy mass relation, and the possibilities to influence it to achieve advantages for the BLSS are determined. A program for the development of BLSS is proposed.

Advanced construction management for lunar base construction - Surface operations planner

NASA Technical Reports Server (NTRS)

Kehoe, Robert P.

1992-01-01

The study proposes a conceptual solution and lays the framework for developing a new, sophisticated and intelligent tool for a lunar base construction crew to use. This concept integrates expert systems for critical decision making, virtual reality for training, logistics and laydown optimization, automated productivity measurements, and an advanced scheduling tool to form a unique new planning tool. The concept features extensive use of computers and expert systems software to support the actual work, while allowing the crew to control the project from the lunar surface. Consideration is given to a logistics data base, laydown area management, flexible critical progress scheduler, video simulation of assembly tasks, and assembly information and tracking documentation.

IMP mission

NASA Technical Reports Server (NTRS)

1972-01-01

The program requirements and operations requirements for the IMP mission are presented. The satellite configuration is described and the missions are analyzed. The support equipment, logistics, range facilities, and responsibilities of the launching organizations are defined. The systems for telemetry, communications, satellite tracking, and satellite control are identified.

Logistics engineering education from the point of view environment

NASA Astrophysics Data System (ADS)

Bányai, Ágota

2010-05-01

A new field of MSc programme offered by the Faculty of Mechanical Engineering and Informatics of the University of Miskolc is represented by the programme in logistics engineering. The Faculty has always laid great emphasis on assigning processes connected with environment protection and globalisation issues the appropriate weight in its programmes. This is based on the fact that the Faculty has initiated and been involved in a great number of research and development projects with a substantial emphasis on the fundamental principles of sustainable development. The objective of the programme of logistics engineering is to train engineers who, in possession of the science, engineering, economic, informatics and industrial, transportation technological knowledge related to the professional field of logistics, are able to analyse, design, organise, and control logistics processes and systems (freight transportation, materials handling, storage, commissioning, loading, purchasing, distribution and waste management) as well as to design and develop machinery and equipment as the elements of logistic systems and also to be involved in their manufacture and quality control and are able to control their operation. The programme prepares its students for performing the logistics management tasks in a company, for creative participation in solving research and development problems in logistics and for pursuing logistics studies in doctoral programmes. There are several laboratories available for practice-oriented training. The 'Integrated Logistics Laboratory' consists of various fixed and mobile, real industrial, i.e. not model-level equipment, the integration of which in one system facilitates not only the presentation, examination and development of the individual self-standing facilities, but the study of their interaction as well in terms of mechatronics, engineering, control engineering, informatics, identification technology and logistics. The state-of-the-art, reliable, automated mechatronics-material flow system with its single control engineering system provides the academic staff with up-to-date research facilities, and enables the students to study sophisticated equipment and systems that could also operate under industrial conditions, thus offering knowledge that can be efficiently utilised in the industry after graduation. The laboratory measurements of the programme in logistics engineering are performed in this laboratory, and they are supplemented by the theoretical and practical measurements in the ‘Robotic Technology Assembly Laboratory', the ‘Power Electronics Laboratory', the ‘Mechatronics Laboratory', the ‘CAD/CAM Laboratory' and the ‘Acoustics and Product Laboratory'. The bodies of knowledge connected with environment protection and sustainable development can be grouped around three large topic areas. In environmental economics the objective is to present the corporate-organisational aspects of environmental management. Putting environmental management in the focal point, the objective of the programme is to impart knowledge that can be utilised in practice which can be used to shift the relation between the organisation and its environment in the direction of sustainability. The tools include environmental controlling, environmental marketing and various solutions of environmental performance evaluation. The second large topic area is globalization and its logistic aspects. In the field of global logistics the following knowledge carries special weight: logistic challenges in a globalised world; the concept of global logistics, its conditions and effects; delayed manufacture, assembly, packaging; the economic investigation of delayed assembly; globalised purchase and distribution in logistics; the logistic features of the globalised production supply/distribution chain; meta-logistics systems; logistics-related EU harmonisation issues; the effect of e-commerce on the global logistic system; logistic centres, connecting virtual logistic companies in a network; the environmental harmonisation of international transportation. The third large area is recycling logistics. Here the bodies of knowledge are as follows: the concept of developing a ‘closed-loop economy'; stages in the progress of products after discarding, connections between the uses of waste collection, processing, selection, deposition or reuse processes; features of European recommendations (e.g. EMAS), harmonisation of national practices and global solutions; presenting the logistics part-processes of recycling; presenting process organisation procedures for the foundation of designing one-route, multi-route, replacement container waste collecting and distributing part systems; recycling strategies with consideration of logistically serving the separation and storage of waste to be deposited, the technological processing systems of recyclable materials; presenting dismantling and product and material identification technologies, presenting logistics part-tasks, analysis of technical solutions; IT solutions for identifying products and their elements to be distributed and withdrawn from distribution after use (e.g. RFID systems) and monitoring their material flow; methodology of using efficiency analyses and incentive systems in the decision making processes of recycling processes, risk analysis for evaluating typical part processes; the methodology of recycling-oriented product design for specific product groups. Graduates of the Master programmes are able to use and utilise the knowledge obtained in practice, use problem-solving techniques; process the information, new problems and new phenomena arising in the border areas of the professional experience gained the discipline; formulate substantial criticism and opinions as far as possible, make decisions and draw conclusions; comprehending and solving the problems arising, suggesting original ideas; plan and perform tasks independently at a high professional standard; improve themselves, develop their knowledge to higher levels; view the management of technical/engineering - economic - human resources in a complex way; design complex systems in a global way based on a system-oriented and process-oriented way of thinking; use integrated knowledge from the professional fields of transport, mobile machinery, process theory, industrial production processes, electronics and informatics; combine the part processes of logistics systems and the part units performing their physical realisation (materials handling equipment, sensors, actuators, control systems, and database systems, etc.); perform state evaluations depending on their specialisation, use them to elaborate evaluations and recommendations, develop complex logistic systems, design, organise and control them at the highest level. This work was implemented with support by the European Union and co-funding of the European Social Fund.

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 2: Study results. Appendix D: Life sciences research facility requirements

NASA Technical Reports Server (NTRS)

Wiley, Lowell F.

1985-01-01

The purpose of this requirements document is to develop the foundation for concept development for the Life Sciences Research Facility (LSRF) on the Space Station. These requirements are developed from the perspective of a Space Station laboratory module outfitter. Science and mission requirements including those related to specimens are set forth. System requirements, including those for support, are detailed. Functional and design requirements are covered in the areas of structures, mechanisms, electrical power, thermal systems, data management system, life support, and habitability. Finally, interface requirements for the Command Module and Logistics Module are described.

The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

NASA Technical Reports Server (NTRS)

1999-01-01

An Airbus Industrie A300-600ST 'Beluga' Super Transporter touches down at the Shuttle Landing Facility to deliver its cargo, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM, named Raffaello, is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

NASA Technical Reports Server (NTRS)

1999-01-01

An Airbus Industrie A300-600ST 'Beluga' Super Transporter lands in the rain at the Shuttle Landing Facility to deliver its cargo, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM, named Raffaello, is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

Assessment of Arms, Ammunition, and Explosives Accountability and Control; Security Assistance; and Sustainment for the Afghan National Security Forces

DTIC Science & Technology

2008-10-24

COMMANDER, U.S. ARMY MATERIAL COMMAND LOGISTICS SUPPORT ACTIVITY Department of Defense Office of Inspector General Report No. SPO-2009...report the serial numbers of weapons it controlled to the DoD SA/LW Registry maintained by the U.S. Army Material Command Logistics Support... Material Command Logistics Support Activity assist the Combined Security Transition Command- Afghanistan in reporting serial numbers for U.S.-supplied

Design and Application of the Exploration Maintainability Analysis Tool

NASA Technical Reports Server (NTRS)

Stromgren, Chel; Terry, Michelle; Crillo, William; Goodliff, Kandyce; Maxwell, Andrew

2012-01-01

Conducting human exploration missions beyond Low Earth Orbit (LEO) will present unique challenges in the areas of supportability and maintainability. The durations of proposed missions can be relatively long and re-supply of logistics, including maintenance and repair items, will be limited or non-existent. In addition, mass and volume constraints in the transportation system will limit the total amount of logistics that can be flown along with the crew. These constraints will require that new strategies be developed with regards to how spacecraft systems are designed and maintained. NASA is currently developing Design Reference Missions (DRMs) as an initial step in defining future human missions. These DRMs establish destinations and concepts of operation for future missions, and begin to define technology and capability requirements. Because of the unique supportability challenges, historical supportability data and models are not directly applicable for establishing requirements for beyond LEO missions. However, supportability requirements could have a major impact on the development of the DRMs. The mass, volume, and crew resources required to support the mission could all be first order drivers in the design of missions, elements, and operations. Therefore, there is a need for enhanced analysis capabilities to more accurately establish mass, volume, and time requirements for supporting beyond LEO missions. Additionally, as new technologies and operations are proposed to reduce these requirements, it is necessary to have accurate tools to evaluate the efficacy of those approaches. In order to improve the analysis of supportability requirements for beyond LEO missions, the Space Missions Analysis Branch at the NASA Langley Research Center is developing the Exploration Maintainability Analysis Tool (EMAT). This tool is a probabilistic simulator that evaluates the need for repair and maintenance activities during space missions and the logistics and crew requirements to support those activities. Using a Monte Carlo approach, the tool simulates potential failures in defined systems, based on established component reliabilities, and then evaluates the capability of the crew to repair those failures given a defined store of spares and maintenance items. Statistical analysis of Monte Carlo runs provides probabilistic estimates of overall mission safety and reliability. This paper will describe the operation of the EMAT, including historical data sources used to populate the model, simulation processes, and outputs. Analysis results are provided for a candidate exploration system, including baseline estimates of required sparing mass and volume. Sensitivity analysis regarding the effectiveness of proposed strategies to reduce mass and volume requirements and improve mission reliability is included in these results.

Transport spatial model for the definition of green routes for city logistics centers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pamučar, Dragan, E-mail: dpamucar@gmail.com; Gigović, Ljubomir, E-mail: gigoviclj@gmail.com; Ćirović, Goran, E-mail: cirovic@sezampro.rs

This paper presents a transport spatial decision support model (TSDSM) for carrying out the optimization of green routes for city logistics centers. The TSDSM model is based on the integration of the multi-criteria method of Weighted Linear Combination (WLC) and the modified Dijkstra algorithm within a geographic information system (GIS). The GIS is used for processing spatial data. The proposed model makes it possible to plan routes for green vehicles and maximize the positive effects on the environment, which can be seen in the reduction of harmful gas emissions and an increase in the air quality in highly populated areas.more » The scheduling of delivery vehicles is given as a problem of optimization in terms of the parameters of: the environment, health, use of space and logistics operating costs. Each of these input parameters was thoroughly examined and broken down in the GIS into criteria which further describe them. The model presented here takes into account the fact that logistics operators have a limited number of environmentally friendly (green) vehicles available. The TSDSM was tested on a network of roads with 127 links for the delivery of goods from the city logistics center to the user. The model supports any number of available environmentally friendly or environmentally unfriendly vehicles consistent with the size of the network and the transportation requirements. - Highlights: • Model for routing light delivery vehicles in urban areas. • Optimization of green routes for city logistics centers. • The proposed model maximizes the positive effects on the environment. • The model was tested on a real network.« less

A Probabilistic Tool that Aids Logistics Engineers in the Establishment of High Confidence Repair Need-Dates at the NASA Shuttle Logistics Depot

NASA Technical Reports Server (NTRS)

Bullington, J. V.; Winkler, J. C.; Linton, D. G.; Khajenoori, S.

1995-01-01

The NASA Shuttle Logistics Depot (NSLD) is tasked with the responsibility for repair and manufacture of Line Replaceable Unit (LRU) hardware and components to support the Space Shuttle Orbiter. Due to shrinking budgets, cost effective repair of LRU's becomes a primary objective. To achieve this objective, is imperative that resources be assigned to those LRU's which have the greatest expectation of being needed as a spare. Forecasting the times at which spares are needed requires consideration of many significant factors including: failure rate, flight rate, spares availability, and desired level of support, among others. This paper summarizes the results of the research and development work that has been accomplished in producing an automated tool that assists in the assignment of effective repair start-times for LRU's at the NSLD. This system, called the Repair Start-time Assessment System (RSAS), uses probabilistic modeling technology to calculate a need date for a repair that considers the current repair pipeline status, as well as, serviceable spares and projections of future demands. The output from the system is a date for beginning the repair that has significantly greater confidence (in the sense that a desired probability of support is ensured) than times produced using other techniques. Since an important output of RSAS is the longest repair turn-around time that will ensure a desired probability of support, RSAS has the potential for being applied to operations at any repair depot where spares are on-hand and repair start-times are of interest. In addition, RSAS incorporates tenants of Just-in-Time (JIT) techniques in that the latest repair start-time (i.e., the latest time at which repair resources must be committed) may be calculated for every failed unit This could reduce the spares inventory for certain items, without significantly increasing the risk of unsatisfied demand.

Information Environment of Preschool Educational Institutions

ERIC Educational Resources Information Center

Shmakova, Anna Pavlovna

2016-01-01

The paper considers the elements of the information environment of preschool educational institutions by the example of the Ulyanovsk region. The article describes the interconnected system of factors that includes qualified personnel, logistics support, methodological basis, and management structures that affect the development of the information…

Integrated Logistic Support Concerns, Electromagnetic Environmental Effects

DTIC Science & Technology

1991-12-19

AVSCOM Directorate for Engineering, AVSCOM ATTN: AMSAV-ES 4300 Goodfellow Blvd St. Louis, MO 63120-1798 OGDEN/ERC Government Systems, Applied ... Engineering Group, analysis tools for the PM E3 Test Facilities: Picatinny Arsenal Aberdeen Proving Ground White Sands Missile Range TRADOC E3 Awareness

Athena Research Ship System (Users Guide)

DTIC Science & Technology

1988-05-01

Users may arrange for their own account any logistic support that does not impact the ship directly; such as crane service, drayage, small craft, flying...craft, photographic services, and the like. Any services that impact the ships’ structural, propulsion and electrical or electronic systems must be...by block number) This manual was developed to provide general information regarding the ATHENA RESEARCH SHIP SYSTEM and specific data relative to the

Development of a Knowledge-Based System Approach for Decision Making in Construction Projects

DTIC Science & Technology

1992-05-01

a generic model for an administrative facility and medical facility with predefined fixed building systems based on Air Force criteria and past...MAINTENANCE HANGAR (MEDIUM BAY) CORROSION CONTROL HANGAR (HIGH BAY) FUEL SYSTEM MAINTENANCE HANGAR (MEDIUM BAY) MEDICAL MODEL 82 Table 5-1--continued...BUILDING SUPPORT MEDICAL LOGISTICS MEDICAL TOTAL 85 Table 5-2--continued MISSILE ASSEMBLY AND MAINTENANCE BUILDING TOTAL MISSILE LOADING AND UNLOADING

77 FR 32599 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... Consideration for Purchase: provides the regeneration, overhaul, modifications, and logistics support of 4... requested a possible sale to provide the regeneration, overhaul, modifications, and logistics support of 4...

Army Sustainment. Volume 43, Issue 5, September-October 2011

DTIC Science & Technology

2011-10-01

provides the critical insights that CASCOM needs to effectively support the Guard and Reserve. The knowledge and understanding possessed by its...pump the information it needs in order to function as a healthy and effective system. The Army Materiel Command’s Logistics Support Ac- tivity...and analysis for its customers worldwide. Logisticians must continually focus on the effect of the operational environment on the Soldier. Having a

Developing a Capacity Assessment Framework for Marine Logistics Groups

DTIC Science & Technology

2017-02-20

test the framework for assessing logistics capacity on a Marine Expeditionary Unit (MEU) Combat Logistics Battalion (CLB). The study proceeded along...and (5) test the framework for assessing logistics capacity on a Marine Expeditionary Unit (MEU) Combat Logistics Battalion (CLB), time permitting...Marine Logistics Group 21 Impact of New Organization on Logistics Support Under the FSSG structure prior to 2006, the Marine Corps employed a

32 CFR 230.4 - Policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... on DoD installations shall be provided logistic support as set forth in 32 CFR part 231. (6) Military... services (to include in-store banking) requiring the outgrant of additional space or logistical support...

32 CFR 230.4 - Policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... on DoD installations shall be provided logistic support as set forth in 32 CFR part 231. (6) Military... services (to include in-store banking) requiring the outgrant of additional space or logistical support...

48 CFR 715.370-1 - Title XII selection procedure-general.

Code of Federal Regulations, 2013 CFR

2013-10-01

... essential, a statement of work, estimate of personnel requirements, special requirements (logistic support... statement of work, an estimate of the personnel required, and special provisions (such as logistic support...

48 CFR 715.370-1 - Title XII selection procedure-general.

Code of Federal Regulations, 2014 CFR

2014-10-01

... essential, a statement of work, estimate of personnel requirements, special requirements (logistic support... statement of work, an estimate of the personnel required, and special provisions (such as logistic support...

48 CFR 715.370-1 - Title XII selection procedure-general.

Code of Federal Regulations, 2012 CFR

2012-10-01

... essential, a statement of work, estimate of personnel requirements, special requirements (logistic support... statement of work, an estimate of the personnel required, and special provisions (such as logistic support...

32 CFR 230.4 - Policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... on DoD installations shall be provided logistic support as set forth in 32 CFR part 231. (6) Military... services (to include in-store banking) requiring the outgrant of additional space or logistical support...

Medical Response to Haiti Earthquake: Operation Unified Response

DTIC Science & Technology

2011-01-24

NGO’s • 1500 patients seen • 4 tons medical supplies Operation UNIFIED RESPONSE Medical Logistics Support 18 Support to PROMESS Warehouse ... Logistics Advisory Team  Re-organized warehouse  Provided inventory mgmt  Teams at port to organize donations  Forklift support Operation UNIFIED

Army Logistician. Volume 34, Issue 1, January-February 2002

DTIC Science & Technology

2002-02-01

Logistics Readiness Support Plan— Marguerite E. Taylor 12 Managing Hellfire Missiles: An Operator’s Perspective —Lieutenant Colonel Paul J. Wood and...College. ARMY LOGISTICIAN PROFESSIONAL BULLETIN OF UNITED STATES ARMY LOGISTICS 9 by Marguerite E. Taylor Munitions Logistics Readiness...deployment, they must embrace the MLRSP. Marguerite E. Taylor is the Operations Support Command’s ammunition liaison officer to the U.S

Contraceptive security, information flow, and local adaptations: family planning Morocco.

PubMed

Chandani, Y; Breton, G

2001-12-01

Many developing countries increasingly recognize and acknowledge family planning as a critical part of socio-economic development. However, with few health dollars to go around, countries tend to provide essential drugs for curative care, rather than for family planning products. Donors have historically provided free contraceptives for family planning services. Whether products are donated or purchased by the country, a successful family planning program depends on an uninterrupted supply of products, beginning with the manufacturer and ending with the customer. Any break in the supply chain may cause a family planning program to fail. A well-functioning logistics system can manage the supply chain and ensure that the customers have the products they need, when they need them. Morocco was selected for the case study. The researchers had ready access to key informants and information about the Logistics Management Information System. Because the study had time and resource constraints, research included desktop reviews and interview, rather than data collection in the field. The case study showed that even in a challenging environment an LMIS can be successfully deployed and fully supported by the users. It is critical to customize the system to a country-specific situation to ensure buy-in for the implementation. Significant external support funding and technical expertise are critical components to ensure the initial success of the system. Nonetheless, evidence from the case study shows that, after a system has been implemented, the benefits may not ensure its institutionalization. Other support, including local funding and technical expertise, is required.

76 FR 72691 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-25

... into the DLA accounting and financial management process. Records are used by the DOD Components who...: Financial Compliance and Process Management (J-89), Headquarters, Defense Logistics Agency, 8725 John J... DoD Components who receive accounting and financial management support from DLA under an...

Human Systems Integration Requirements

DTIC Science & Technology

2009-09-01

52 Stratofortress, C/ KC -135 Stratotanker, E-3 Sentry and contractor logistics support aircraft; as well as a substantial jet engine inventory...www.hqda.army.mil/ teo /Sutability%20Terms%20MOA%20Oct%2005.pdf q. ISO 9241-11, Ergonomic requirements for office work with visual display terminals (VDTs

Simulation of Aircraft Deployment Support

DTIC Science & Technology

2003-03-01

Dassault Aviation Military Customer Support Division 78, Quai Marcel Dassault Cedex 300 92552 St Cloud Cedex France Tel.: 33 147 1163 23 Fax.: 33 147...Deployment Support" (SADS) was developed by the Military Customer Support Division of Dassault Aviation to perform simulations for logistics deployment and...and support Chain Management for the management of the logistics resources (replenishment of consumables and repair of parts, inventory management

NASA Advanced Explorations Systems: Concepts for Logistics to Living

NASA Technical Reports Server (NTRS)

Shull, Sarah A.; Howe, A. Scott; Flynn, Michael T.; Howard, Robert

2012-01-01

The NASA Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) project strives to enable a largely mission-independent cradle-to-grave-to-cradle approach to minimize logistics contributions to total mission architecture mass. The goals are to engineer logistics materials, common crew consumables, and container configurations to meet the following five basic goals: 1. Minimize intrinsic logistics mass and improve ground logistics flexibility. 2. Allow logistics components to be directly repurposed for on-orbit non-logistics functions (e.g., crew cabin outfitting) thereby indirectly reducing mass/volume. 3. Compact and process logistics that have not been directly repurposed to generate useful on-orbit components and/or compounds (e.g., radiation shielding, propellant, other usable chemical constituents). 4. Enable long-term stable storage and disposal of logistics end products that cannot be reused or repurposed (e.g., compaction for volume reduction, odor control, and maintenance of crew cabin hygienic conditions). 5. Allow vehicles in different mission phases to share logistics resources. This paper addresses the work being done to meet the second goal, the direct repurposing of logistics components to meet other on-orbit needs, through a strategy termed Logistics to Living (L2L). L2L has several areas but can be defined as repurposing or converting logistical items (bags, containers, foam, components, etc.) into useful crew items or life support augmentation on-orbit after they have provided their primary logistics function. The intent is that by repurposing items, dedicated crew items do not have to be launched and overall launch mass is decreased. For non-LEO missions, the vehicle interior volume will be relatively fixed so L2L will enable this volume to be used more effectively through reuse and rearrangement of logistical components. Past work in the area of L2L has already conceptually developed several potential technologies [Howe, Howard 2010]. Several of the L2L concepts that have shown the most potential in the past are based on NASA cargo transfer bags (CTBs) or their equivalents which are currently used to transfer cargo to and from the ISS. A high percentage of all logistics supplies are packaging mass and for a 6-month mission a crew of four might need over 100 CTBs. These CTBs are used for on-orbit transfer and storage but eventually becomes waste after use since down mass is very limited. The work being done in L2L also considering innovative interior habitat construction that integrate the CTBs into the walls of future habitats. The direct integration could provide multiple functions: launch packaging, stowage, radiation protection, water processing, life support augmentation, as well as structure. Reuse of these CTBs would reduce the amount of waste generated and also significantly reduce future up mass requirements for exploration missions. Also discussed here is the L2L water wall , an innovative reuse of an unfolded CTB as a passive water treatment system utilizing forward osmosis. The bags have been modified to have an inner membrane liner that allows them to purify wastewater. They may also provide a structural water-wall element that can be used to provide radiation protection and as a structural divider. Integration of the components into vehicle/habitat architecture and consideration of operations concepts and human factors will be discussed. In the future these bags could be designed to treat wastewater, concentrated brines, and solid wastes, and to dewater solid wastes and produce a bio-stabilized construction element. This paper will describe the follow-on work done in design, fabrication and demonstrations of various L2L concepts, including advanced CTBs for reuse/repurposing, internal outfitting studies and the CTB-based forward osmosis water wall.

PASSCAL Instrument Center Support for Cryoseismology: Methodologies, Challenges, Development and Instrumentation

NASA Astrophysics Data System (ADS)

Beaudoin, B. C.; Anderson, K. R.; Bilek, S. L.; Carpenter, P.; Childs, D.; Chung, P.; Huerta, A. D.; Lingutla, N.; Nikolaus, K.; Winberry, J. P.

2017-12-01

Remote portable seismic stations are, in most cases, constrained by logistics and cost. High latitude operations introduce environmental, technical and logistical challenges that require substantially more engineering work to ensure robust, high quality data return. Since 2006, IRIS PASSCAL has been funded by NSF to develop, deploy, and maintain a pool of polar specific seismic stations. At roughly the same time, PASSCAL began supporting experiments specifically targeting glacier dynamics such as the mechanisms of subglacial hydrology, basal shear stress, ice stream stick slip mechanisms, and glacier seismicity. Although much of the development for high-latitude deployments was directly applicable to cryoseismology, these new experiments introduced a unique series of challenges including high ablation, standing water, and moving stations. Our polar development objectives have focused on: Reducing station power requirements, size and weight; Extending the operational temperature of a station; Simplifying logistics; Engineering solutions that are cost effective, manufacturable, serviceable and reusable; And, developing high-latitude communications for both state-of-health and data transmission. To these ends, PASSCAL continues testing new power storage technology, refining established power systems for lighter and smaller power banks, and exploring telemetry solutions to increase high-bandwidth communication options and abilities for remote seismic stations. Further enhancing PASSCAL's ability to support cryoseismology is a recent NSF funded collaborative effort lead by Central Washing University joined by IRIS and New Mexico Tech to build a Geophysical Earth Observatory for Ice Covered Environments (GEOICE). The GEOICE instrument, power system and other integrated ancillary components are designed to require minimal installation time and logistical load (i.e., size and weight), while maximizing ease-of-use in the field and optimizing costs of instrumentation and experiment consumables. The instrument capability will include a hybrid seismograph pool of broadband and intermediate elements, for observation of both long-period and intermediate-to-short-period signals, and a high-frequency node element.

Managing NASA's International Space Station Logistics and Maintenance program

NASA Astrophysics Data System (ADS)

Butina, Anthony J.

2001-02-01

The International Space Station will be a permanently manned orbiting vehicle that has no landing gear, no international borders, and no organizational lines-it is one Station that must be supported by one crew, 24 hours a day, 7 days a week, 365 days a year. It flies partially assembled for a number of years before it is finally complete in April of 2006. Space logistics is a new concept that will have wide reaching consequences for both space travel and life on Earth. What is it like to do something that no one has done before? What challenges do you face? What kind of organization do you put together to perform this type of task? How do you optimize your resources to procure what you need? How do you change a paradigm within a space agency? How do you coordinate and manage a one of a kind system with approximately 5,700 Orbital Replaceable Units (ORUs)? How do you plan for preventive and corrective maintenance, when you need to procure spare parts which number into the hundreds of thousands, from 127 major US vendors and 70 major international vendors? How do you transport large sections of ISS hardware around the country? These are some of the topics discussed in this paper. From conception to operation, the ISS requires a unique approach in all aspects of development and operation. Today the dream is coming true; hardware is flying and hardware is failing. The system has been put into place to support the Station and only time will tell if we did it right. This paper discusses some of the experiences of the author after working 12 years on the International Space Station's integrated logistics & maintenance program. From his early days as a contractor supportability engineer and manager, to the NASA manager responsible for the entire ISS Logistics and Maintenance program. .

SpaceOps 1992: Proceedings of the Second International Symposium on Ground Data Systems for Space Mission Operations

NASA Technical Reports Server (NTRS)

1993-01-01

The Second International Symposium featured 135 oral presentations in these 12 categories: Future Missions and Operations; System-Level Architectures; Mission-Specific Systems; Mission and Science Planning and Sequencing; Mission Control; Operations Automation and Emerging Technologies; Data Acquisition; Navigation; Operations Support Services; Engineering Data Analysis of Space Vehicle and Ground Systems; Telemetry Processing, Mission Data Management, and Data Archiving; and Operations Management. Topics focused on improvements in the productivity, effectiveness, efficiency, and quality of mission operations, ground systems, and data acquisition. Also emphasized were accomplishments in management of human factors; use of information systems to improve data retrieval, reporting, and archiving; design and implementation of logistics support for mission operations; and the use of telescience and teleoperations.

Systems Analysis of Life Support for Long-Duration Missions

NASA Technical Reports Server (NTRS)

Drysdale, Alan E.; Maxwell, Sabrina; Ewert, Michael K.; Hanford, Anthony J.

2000-01-01

Work defining advanced life support (ALS) technologies and evaluating their applicability to various long-duration missions has continued. Time-dependent and time-invariant costs have been estimated for a variety of life support technology options, including International Space Station (ISS) environmental control and life support systems (ECLSS) technologies and improved options under development by the ALS Project. These advanced options include physicochemical (PC) and bioregenerative (BIO) technologies, and may in the future include in-situ resource utilization (ISRU) in an attempt to reduce both logistics costs and dependence on supply from Earth. PC and bioregenerative technologies both provide possibilities for reducing mission equivalent system mass (ESM). PC technologies are most advantageous for missions of up to several years in length, while bioregenerative options are most appropriate for longer missions. ISRU can be synergistic with both PC and bioregenerative options.

The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

NASA Technical Reports Server (NTRS)

1999-01-01

An Airbus Industrie A300-600ST 'Beluga' Super Transporter is reflected in the rain puddles as it comes to a stop at the Shuttle Landing Facility. The Beluga is carrying the Raffaello, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

NASA Technical Reports Server (NTRS)

1999-01-01

An Airbus Industrie A300-600ST 'Beluga' Super Transporter is reflected in the rain puddles as it taxis toward the mate/demate tower at the Shuttle Landing Facility. The Beluga is carrying the Raffaello, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

Space station needs, attributes and architectural options. Volume 4, task 2 and 3: Mission implementation and cost

NASA Technical Reports Server (NTRS)

1983-01-01

An overview of the basic space station infrastructure is presented. A strong case is made for the evolution of the station using the basic Space Transportation System (STS) to achieve a smooth transition and cost effective implementation. The integrated logistics support (ILS) element of the overall station infrastructure is investigated. The need for an orbital transport system capability that is the key to servicing and spacecraft positioning scenarios and associated mission needs is examined. Communication is also an extremely important element and the basic issue of station autonomy versus ground support effects the system and subsystem architecture.

Direct Burial Broadband Seismic Instrumentation that are Rugged and Tilt Tolerant for Polar Environments

NASA Astrophysics Data System (ADS)

Parker, Tim; Winberry, Paul; Huerta, Audrey; Bainbridge, Geoff; Devanney, Peter

2016-04-01

The integrated broadband Meridian Posthole and Compact seismic systems have been engineered and tested for extreme polar environments. Ten percent of the Earth's surface is covered in glacial ice and the dynamics of these environments is a strategic concern for all. The development for these systems was driven by researchers needing to densify observations in ice covered regions with difficult and limited logistics. Funding from an NSF MRI award, GEOICE and investment from the vendor enabled researchers to write the specifications for a hybrid family of instruments that can operate at -55C autonomously with very little power, 1 watt for the Meridian Compact system and 1.5 watts for the Meridian 120PH. Tilt tolerance in unstable ice conditions was a concern and these instruments have a range of up to +/-5 degrees. The form factor, extreme temperature tolerance and power load of the instruments has reduced the bulk of a complete station by 1/2 and simplified installation greatly allowing more instruments to be deployed with limited support and a lighter logistical load. These systems are being tested in the Antarctic at SouthPole Station and McMurdo for the second year and the investment has encouraged other instrument and power system vendors to offer polar rated equipment including telemetry for ancillary support.

A two stage launch vehicle for use as an advanced space transportation system for logistics support of the space station

NASA Technical Reports Server (NTRS)

1987-01-01

This report describes the preliminary design specifications for an Advanced Space Transportation System consisting of a fully reusable flyback booster, an intermediate-orbit cargo vehicle, and a shuttle-type orbiter with an enlarged cargo bay. It provides a comprehensive overview of mission profile, aerodynamics, structural design, and cost analyses. These areas are related to the overall feasibility and usefullness of the proposed system.

An Implementation of Integrated Logistic Support for Turkish Armed Forces

DTIC Science & Technology

1990-06-01

of systems available for sale by friendly countries. Usually the procurement decision is based upon procurement costs so the tendency is to buy the...result from various design alternatives. From the author’s personal experience, careful planning before buying a weapon system would have solved various...convincing the government of the long term advantages of buying the system which has the least life-cycle costs, especially when these costs are spread

78 FR 48422 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... other related elements of program and logistics support. The estimated cost is $300 million. This... and logistical support. There will be no adverse impact on U.S. defense readiness as a result of this...

A home away from home. [life support system design for Space Station

NASA Technical Reports Server (NTRS)

Powell, L. E.; Hager, R. W.; Mccown, J. W.

1985-01-01

The role of the NASA-Marshall center in the development of the Space Station is discussed. The tasks of the center include the development of the life-support system; the design of the common module, which will form the basis for all pressurized Space Station modules; the design and outfit of a common module for the Material and Technology Laboratory (MTL) and logistics use; accommodations for operations of the Orbit Maneuvering Vehicle (OMV) and the Orbit Transfer Vehicle (OTV); and the Space Station propulsion system. A description of functions and design is given for each system, with particular emphasis on the goals of safety, efficiency, automation, and cost effectiveness.

Business Case Analysis: Continuous Integrated Logistics Support-Targeted Allowance Technique (CILS-TAT)

DTIC Science & Technology

2013-06-01

In this research, we examine the Naval Sea Logistics Command s Continuous Integrated Logistics Support Targeted Allowancing Technique (CILS TAT) and... the feasibility of program re-implementation. We conduct an analysis of this allowancing method s effectiveness onboard U.S. Navy Ballistic Missile...Defense (BMD) ships, measure the costs associated with performing a CILS TAT, and provide recommendations concerning possible improvements to the

Cold Regions Logistic Supportability Testing of Missiles and Rocket Systems.

DTIC Science & Technology

1984-10-26

006 APPENDIX B - POST-TEST CHECKLIST 1. Have test data been collected, recorded, and presented in accordance with this TOP? YES NO Comment : 2. Have all...data collected been reviewed for correctness and completeness? YES_ NO Comment : 3. Were the facilities, test equipment, instrumentation, and support...YES NO Comment : 5. Were the test results compromised in any way due to test performance procedures? YES_ NO Comment : 6. Were the test results

United States Marine Corps Expeditionary Energy Strategy and Implementation Plan

DTIC Science & Technology

2011-02-01

Support System (NTCSS, OOMA/OIMA), and Aircraft Inventory Readiness and Reporting System (AIRRS) data in the Naval Aviation Logistics Data Analysis...Corps’ share is used for operational purposes—fuel for training, moving and sustaining our forces, aircraft and weapons platforms .1 Within this, and...this 75% was consumed by ‘ground forces,’ which includes use by vehicles, generators, and other sustainment equipment . Aircraft consumed

78 FR 23194 - Federal Acquisition Regulation; Commercial and Government Entity Code

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-18

... Award Management Name Change, Phase 1 Implementation) which will make a global update to all of the... outside the United States; and Support supply chain traceability and integrity efforts. II. Discussion and.... For Contractors registered in the System for Award Management (SAM), the DLA Logistics Information...

77 FR 38036 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-26

... submit to the Office of Management and Budget (OMB) for clearance the following proposal for collection... support from the Federal Reserve Board (FRB) and the Defense Logistics Agency (DLA), the U.S. Census... publishing plants as defined by the North American Industry Classification System (NAICS). It is the only...

77 FR 13564 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-07

.... Government and contractor technical assistance and other related logistics support. \\*\\ as defined in Section... the ability to integrate the Helmet Mounted Cueing System. The software algorithms are the most sensitive portion of the AIM-9X-2 missile. The software continues to be modified via a pre- planned product...

75 FR 28181 - National Defense Transportation Day and National Transportation Week, 2010

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... ensure America has a world-class logistics and transportation system to support our military readiness... the President of the United States of America A Proclamation The transportation networks of early America connected our rapidly growing Nation with natural waterways and dirt roads, making travel...

Using System Mass (SM), Equivalent Mass (EM), Equivalent System Mass (ESM) or Life Cycle Mass (LCM) in Advanced Life Support (ALS) Reporting

NASA Technical Reports Server (NTRS)

Jones, Harry

2003-01-01

The Advanced Life Support (ALS) has used a single number, Equivalent System Mass (ESM), for both reporting progress and technology selection. ESM is the launch mass required to provide a space system. ESM indicates launch cost. ESM alone is inadequate for technology selection, which should include other metrics such as Technology Readiness Level (TRL) and Life Cycle Cost (LCC) and also consider perfom.arxe 2nd risk. ESM has proven difficult to implement as a reporting metric, partly because it includes non-mass technology selection factors. Since it will not be used exclusively for technology selection, a new reporting metric can be made easier to compute and explain. Systems design trades-off performance, cost, and risk, but a risk weighted cost/benefit metric would be too complex to report. Since life support has fixed requirements, different systems usually have roughly equal performance. Risk is important since failure can harm the crew, but it is difficult to treat simply. Cost is not easy to estimate, but preliminary space system cost estimates are usually based on mass, which is better estimated than cost. Amass-based cost estimate, similar to ESM, would be a good single reporting metric. The paper defines and compares four mass-based cost estimates, Equivalent Mass (EM), Equivalent System Mass (ESM), Life Cycle Mass (LCM), and System Mass (SM). EM is traditional in life support and includes mass, volume, power, cooling and logistics. ESM is the specifically defined ALS metric, which adds crew time and possibly other cost factors to EM. LCM is a new metric, a mass-based estimate of LCC measured in mass units. SM includes only the factors of EM that are originally measured in mass, the hardware and logistics mass. All four mass-based metrics usually give similar comparisons. SM is by far the simplest to compute and easiest to explain.

Improved Specimen-Referral System and Increased Access to Quality Laboratory Services in Ethiopia: The Role of the Public-Private Partnership

PubMed Central

Kebede, Yenew; Fonjungo, Peter N.; Tibesso, Gudeta; Shrivastava, Ritu; Nkengasong, John N.; Kenyon, Thomas; Kebede, Amha; Gadde, Renuka; Ayana, Gonfa

2016-01-01

Background. Nonstandardized specimen-transport logistics, lack of laboratory personnel to transport specimens, lack of standard specimen containers, and long turnaround time (TAT) hindered access to quality laboratory services. The objective of the Becton, Dickinson, and Company (BD)–US President's Emergency Plan for AIDS Relief (PEPFAR) Public-Private Partnership (PPP) was to support country-specific programs to develop integrated laboratory systems, services, and quality improvement strategies, with an emphasis on strengthening the specimen-referral system (SRS). Methods. In 2007, through the Centers for Disease Control and Prevention (CDC), the Ethiopian Public Health Institute (EPHI) joined with the BD-PEPFAR PPP to strengthen laboratory systems. A joint planning and assessment committee identified gaps in the SRS for prioritization and intervention and piloted the system in Addis Ababa and Amhara Region. Results. The PPP established standardized, streamlined specimen logistics, using the Ethiopian Postal Service Enterprise to support a laboratory network in which 554 facilities referred specimens to 160 laboratories. The PPP supported procuring 400 standard specimen containers and the training of 586 laboratory personnel and 81 postal workers. The average TAT was reduced from 7 days (range, 2–14 days) to 2 days (range, 1–3 days) in Addis Ababa and from 10 days (range, 6–21 days) to 5 days (range, 2–6 days) in Amhara Region. Conclusions. This study highlights the feasibility and untapped potential of PPPs to strengthen laboratory systems. This planned and structured approach to improving specimen referral enhanced access to quality laboratory services. PMID:27025700

Tailored logistics: the next advantage.

PubMed

Fuller, J B; O'Conor, J; Rawlinson, R

1993-01-01

How many top executives have ever visited with managers who move materials from the factory to the store? How many still reduce the costs of logistics to the rent of warehouses and the fees charged by common carriers? To judge by hours of senior management attention, logistics problems do not rank high. But logistics have the potential to become the next governing element of strategy. Whether they know it or not, senior managers of every retail store and diversified manufacturing company compete in logistically distinct businesses. Customer needs vary, and companies can tailor their logistics systems to serve their customers better and more profitably. Companies do not create value for customers and sustainable advantage for themselves merely by offering varieties of goods. Rather, they offer goods in distinct ways. A particular can of Coca-Cola, for example, might be a can of Coca-Cola going to a vending machine, or a can of Coca-Cola that comes with billing services. There is a fortune buried in this distinction. The goal of logistics strategy is building distinct approaches to distinct groups of customers. The first step is organizing a cross-functional team to proceed through the following steps: segmenting customers according to purchase criteria, establishing different standards of service for different customer segments, tailoring logistics pipelines to support each segment, and creating economics of scale to determine which assets can be shared among various pipelines. The goal of establishing logistically distinct businesses is familiar: improved knowledge of customers and improved means of satisfying them.

Status of Japanese Experiment Module (JEM) activities

NASA Technical Reports Server (NTRS)

1991-01-01

The current status of the JEM activities are presented in graphic form. The JEM spacecraft configuration is presented. The JEM configuration consist of the Pressurized Module, the Exposed Facility, the Experiment Logistics Module which consist of a pressurized section and an exposed section; and the Remote Manipulator System. The master schedule of the space station is given. Also the development tests of the structure and mechanism, the electrical power system, the data management system, the thermal control system, the environment control system, the experiment support system, and the remote manipulator system are listed.

Research on a simulation-based ship production support system for middle-sized shipbuilding companies

NASA Astrophysics Data System (ADS)

Song, Young Joo; Woo, Jong Hun; Shin, Jong Gye

2009-12-01

Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

A Medical Decision Support System for the Space Station Health Maintenance Facility

PubMed Central

Ostler, David V.; Gardner, Reed M.; Logan, James S.

1988-01-01

NASA is developing a Health Maintenance Facility (HMF) to provide the equipment and supplies necessary to deliver medical care in the Space Station. An essential part of the Health Maintenance Facility is a computerized Medical Decision Support System (MDSS) that will enhance the ability of the medical officer (“paramedic” or “physician”) to maintain the crew's health, and to provide emergency medical care. The computer system has four major functions: 1) collect and integrate medical information into an electronic medical record from Space Station medical officers, HMF instrumentation, and exercise equipment; 2) provide an integrated medical record and medical reference information management system; 3) manage inventory for logistical support of supplies and secure pharmaceuticals; 4) supply audio and electronic mail communications between the medical officer and ground based flight surgeons. ImagesFigure 1

Supportability Technologies for Future Exploration Missions

NASA Technical Reports Server (NTRS)

Watson, Kevin; Thompson, Karen

2007-01-01

Future long-duration human exploration missions will be challenged by resupply limitations and mass and volume constraints. Consequently, it will be essential that the logistics footprint required to support these missions be minimized and that capabilities be provided to make them highly autonomous from a logistics perspective. Strategies to achieve these objectives include broad implementation of commonality and standardization at all hardware levels and across all systems, repair of failed hardware at the lowest possible hardware level, and manufacture of structural and mechanical replacement components as needed. Repair at the lowest hardware levels will require the availability of compact, portable systems for diagnosis of failures in electronic systems and verification of system functionality following repair. Rework systems will be required that enable the removal and replacement of microelectronic components with minimal human intervention to minimize skill requirements and training demand for crews. Materials used in the assembly of electronic systems (e.g. solders, fluxes, conformal coatings) must be compatible with the available repair methods and the spacecraft environment. Manufacturing of replacement parts for structural and mechanical applications will require additive manufacturing systems that can generate near-net-shape parts from the range of engineering alloys employed in the spacecraft structure and in the parts utilized in other surface systems. These additive manufacturing processes will need to be supported by real-time non-destructive evaluation during layer-additive processing for on-the-fly quality control. This will provide capabilities for quality control and may serve as an input for closed-loop process control. Additionally, non-destructive methods should be available for material property determination. These nondestructive evaluation processes should be incorporated with the additive manufacturing process - providing an in-process capability to ensure that material deposited during layer-additive processing meets required material property criteria.

[Research of regional medical consumables reagent logistics system in the modern hospital].

PubMed

Wu, Jingjiong; Zhang, Yanwen; Luo, Xiaochen; Zhang, Qing; Zhu, Jianxin

2013-09-01

To explore the modern hospital and regional medical consumable reagents logistics system management. The characteristics of regional logistics, through cooperation between medical institutions within the region, and organize a wide range of special logistics activities, to make reasonable of the regional medical consumable reagents logistics. To set the regional management system, dynamic management systems, supply chain information management system, after-sales service system and assessment system. By the research of existing medical market and medical resources, to establish the regional medical supplies reagents directory and the initial data. The emphasis is centralized dispatch of medical supplies reagents, to introduce qualified logistics company for dispatching, to improve the modern hospital management efficiency, to costs down. Regional medical center and regional community health service centers constitute a regional logistics network, the introduction of medical consumable reagents logistics services, fully embodies integrity level, relevance, purpose, environmental adaptability of characteristics by the medical consumable reagents regional logistics distribution. Modern logistics distribution systems can increase the area of medical consumables reagent management efficiency and reduce costs.

Business Case Analysis: Continuous Integrated Logistics Support-Targeted Allowance Technique (CILS-TAT)

DTIC Science & Technology

2013-05-30

In this research, we examine the Naval Sea Logistics Command’s Continuous Integrated Logistics Support-Targeted Allowancing Technique (CILS-TAT) and... the feasibility of program re-implementation. We conduct an analysis of this allowancing method’s effectiveness onboard U.S. Navy Ballistic Missile...Defense (BMD) ships, measure the costs associated with performing a CILS-TAT, and provide recommendations concerning possible improvements to the

Gulf War Air Power Survey. Volume 3. Logistics and Support

DTIC Science & Technology

1993-01-01

miss casualty ground war would have been transported speedily to the most appropri- ate medical facilities. Command and control of airevac missions de ...maintenance of the force, and its transportation necessary for war. The second report, Sup. port, concerns itself with the air base and airbase operations... transportation , supply, maintenance, and the myriad aspects of logistics planning and coordination. Mr. Richard Gunkel was the Logistics, Support, and Space

Radio Frequency Identification Queuing & Geo-Location (RAQGEO): A spatial solution to inventory management at XYZ Logistics, Inc

NASA Astrophysics Data System (ADS)

Griffiths, Bradley Joseph

New supply chain management methods using radio frequency identification (RFID) and global positioning system (GPS) technology are quickly being adopted by companies as various inventory management benefits are being realized. For example, companies such as Nippon Yusen Kaisha (NYK) Logistics use the technology coupled with geospatial support systems for distributors to quickly find and manage freight containers. Traditional supply chain management methods require pen-to-paper reporting, searching inventory on foot, and human data entry. Some companies that prioritize supply chain management have not adopted the new technology, because they may feel that their traditional methods save the company expenses. This thesis serves as a pilot study that examines how information technology (IT) utilizing RFID and GPS technology can serve to increase workplace productivity, decrease human labor associated with inventorying, plus be used for spatial analysis by management. This pilot study represents the first attempt to couple RFID technology with Geographic Information Systems (GIS) in supply chain management efforts to analyze and locate mobile assets by exploring costs and benefits of implementation plus how the technology can be employed. This pilot study identified a candidate to implement a new inventory management method as XYZ Logistics, Inc. XYZ Logistics, Inc. is a fictitious company but represents a factual corporation. The name has been changed to provide the company with anonymity and to not disclose confidential business information. XYZ Logistics, Inc., is a nation-wide company that specializes in providing space solutions for customers including portable offices, storage containers, and customizable buildings.

Proceedings of the Goddard Space Flight Center Workshop on Robotics for Commercial Microelectronic Processes in Space

NASA Technical Reports Server (NTRS)

1987-01-01

Potential applications of robots for cost effective commercial microelectronic processes in space were studied and the associated robotic requirements were defined. Potential space application areas include advanced materials processing, bulk crystal growth, and epitaxial thin film growth and related processes. All possible automation of these processes was considered, along with energy and environmental requirements. Aspects of robot capabilities considered include system intelligence, ROM requirements, kinematic and dynamic specifications, sensor design and configuration, flexibility and maintainability. Support elements discussed included facilities, logistics, ground support, launch and recovery, and management systems.

Strategies on the Implementation of China's Logistics Information Network

NASA Astrophysics Data System (ADS)

Dong, Yahui; Li, Wei; Guo, Xuwen

The economic globalization and trend of e-commerce network have determined that the logistics industry will be rapidly developed in the 21st century. In order to achieve the optimal allocation of resources, a worldwide rapid and sound customer service system should be established. The establishment of a corresponding modern logistics system is the inevitable choice of this requirement. It is also the inevitable choice for the development of modern logistics industry in China. The perfect combination of modern logistics and information network can better promote the development of the logistics industry. Through the analysis of Status of Logistics Industry in China, this paper summed up the domestic logistics enterprise logistics information system in the building of some common problems. According to logistics information systems planning methods and principles set out logistics information system to optimize the management model.

Constellation Architecture Team-Lunar: Lunar Habitat Concepts

NASA Technical Reports Server (NTRS)

Toups, Larry; Kennedy, Kriss J.

2008-01-01

This paper will describe lunar habitat concepts that were defined as part of the Constellation Architecture Team-Lunar (CxAT-Lunar) in support of the Vision for Space Exploration. There are many challenges to designing lunar habitats such as mission objectives, launch packaging, lander capability, and risks. Surface habitats are required in support of sustaining human life to meet the mission objectives of lunar exploration, operations, and sustainability. Lunar surface operations consist of crew operations, mission operations, EVA operations, science operations, and logistics operations. Habitats are crewed pressurized vessels that include surface mission operations, science laboratories, living support capabilities, EVA support, logistics, and maintenance facilities. The challenge is to deliver, unload, and deploy self-contained habitats and laboratories to the lunar surface. The CxAT-Lunar surface campaign analysis focused on three primary trade sets of analysis. Trade set one (TS1) investigated sustaining a crew of four for six months with full outpost capability and the ability to perform long surface mission excursions using large mobility systems. Two basic habitat concepts of a hard metallic horizontal cylinder and a larger inflatable torus concept were investigated as options in response to the surface exploration architecture campaign analysis. Figure 1 and 2 depicts the notional outpost configurations for this trade set. Trade set two (TS2) investigated a mobile architecture approach with the campaign focused on early exploration using two small pressurized rovers and a mobile logistics support capability. This exploration concept will not be described in this paper. Trade set three (TS3) investigated delivery of a "core' habitation capability in support of an early outpost that would mature into the TS1 full outpost capability. Three core habitat concepts were defined for this campaign analysis. One with a four port core habitat, another with a 2 port core habitat, and the third investigated leveraging commonality of the lander ascent module and airlock pressure vessel hard shell. The paper will describe an overview of the various habitat concepts and their functionality. The Crew Operations area includes basic crew accommodations such as sleeping, eating, hygiene and stowage. The EVA Operations area includes additional EVA capability beyond the suit-port airlock function such as redundant airlock(s), suit maintenance, spares stowage, and suit stowage. The Logistics Operations area includes the enhanced accommodations for 180 days such as closed loop life support systems hardware, consumable stowage, spares stowage, interconnection to the other Hab units, and a common interface mechanism for future growth and mating to a pressurized rover. The Mission & Science Operations area includes enhanced outpost autonomy such as an IVA glove box, life support, and medical operations.

Restructuring patient flow logistics around patient care needs: implications and practicalities from three critical cases.

PubMed

Villa, Stefano; Barbieri, Marta; Lega, Federico

2009-06-01

To make hospitals more patient-centered it is necessary to intervene on patient flow logistics. The study analyzes three innovative redesign projects implemented at three Italian hospitals. The three hospitals have reorganized patient flow logistics around patient care needs using, as proxies, the expected length of stay and the level of nursing assistance. In order to do this, they have extensively revised their logistical configuration changing: (1) the organization of wards, (2) the hospital's physical lay-out, (3) the capacity planning system, and (4) the organizational roles supporting the patient flow management. The study describes the changes implemented as well as the results achieved and draws some general lessons that provide useful hints for those other hospitals involved in such type of redesign projects. The paper ends by discussing some policy implications. In fact, the results achieved in the three cases investigated provide interesting material for further discussion on clinical, operational, and economic issues.

Mobile remote manipulator vehicle system

NASA Technical Reports Server (NTRS)

Bush, Harold G. (Inventor); Mikulas, Martin M., Jr. (Inventor); Wallsom, Richard E. (Inventor); Jensen, J. Kermit (Inventor)

1987-01-01

A mobile remote manipulator system is disclosed for assembly, repair and logistics transport on, around and about a space station square bay truss structure. The vehicle is supported by a square track arrangement supported by guide pins integral with the space station truss structure and located at each truss node. Propulsion is provided by a central push-pull drive mechanism that extends out from the vehicle one full structural bay over the truss and locks drive rods into the guide pins. The draw bar is now retracted and the mobile remote manipulator system is pulled onto the next adjacent structural bay. Thus, translation of the vehicle is inchworm style. The drive bar can be locked onto two guide pins while the extendable draw bar is within the vehicle and then push the vehicle away one bay providing bidirectional push-pull drive. The track switches allow the vehicle to travel in two orthogonal directions over the truss structure which coupled with the bidirectional drive, allow movement in four directions on one plane. The top layer of this trilayered vehicle is a logistics platform. This platform is capable of 369 degees of rotation and will have two astronaut foot restraint platforms and a space crane integral.

Logistics Handbook, 1976. Colorado Outward Bound School.

ERIC Educational Resources Information Center

Colorado Outward Bound School, Denver.

Logistics, a support mission, is vital to the successful operation of the Colorado Outward Bound School (COBS) courses. Logistics is responsible for purchasing, maintaining, transporting, and replenishing a wide variety of items, i.e., food, mountaineering and camping equipment, medical and other supplies, and vehicles. The Logistics coordinator…

Personnel occupied woven envelope robot power

NASA Technical Reports Server (NTRS)

1987-01-01

The Human Occupied Space Teleoperator (HOST) system currently under development utilizes a flexible tunnel/Stewart table structure to provide crew access to a pressurized manned work station or POD on the space station without extravehicular activity (EVA). The HOST structure facilitates moving a work station to multiple space station locations. The system has applications to orbiter docking, space station assembly, satellite servicing, space station maintenance, and logistics support. The conceptual systems design behind HOST is described in detail.

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Lee Archambault and STS-114 Mission Specialist Charles Camarda watch as crew members work with equipment that will be used on the mission. Archambault supports launch and landing operations at the Kennedy Space Center as an Astronaut Office representative. Crew members are at KSC for equipment familiarization. STS-114 is classified as Logistics Flight 1 to the International Space Station, delivering new supplies and replacing one of the orbital outpost’s Control Moment Gyroscopes (CMGs). STS-114 will also carry a Raffaello Multi-Purpose Logistics Module and the External Stowage Platform-2. The crew is slated to conduct at least three spacewalks: They will demonstrate repair techniques of the Shuttle’s Thermal Protection System, replace the failed CMG with one delivered by the Shuttle, and install the External Stowage Platform.

NASA Image and Video Library

2004-01-27

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Lee Archambault and STS-114 Mission Specialist Charles Camarda watch as crew members work with equipment that will be used on the mission. Archambault supports launch and landing operations at the Kennedy Space Center as an Astronaut Office representative. Crew members are at KSC for equipment familiarization. STS-114 is classified as Logistics Flight 1 to the International Space Station, delivering new supplies and replacing one of the orbital outpost’s Control Moment Gyroscopes (CMGs). STS-114 will also carry a Raffaello Multi-Purpose Logistics Module and the External Stowage Platform-2. The crew is slated to conduct at least three spacewalks: They will demonstrate repair techniques of the Shuttle’s Thermal Protection System, replace the failed CMG with one delivered by the Shuttle, and install the External Stowage Platform.

Proceedings of the USAF Logistics Capability Assessment Symposium LOGCAS 82 Held at USAF Academy, Colorado on 15-19 March 1982

DTIC Science & Technology

1982-05-01

Ohio. General Merkling , fZ" and graduated from Hamilton High School, Los Angeles. He has a bachelor of science degree in mechanical engineering...navigation, navigation radar and doppler radar systems on bomber, cargo , fighter, and drone aircraft. He also performed duties as maintenance debriefer...measure supply support for those items. ihe model will also project future performance and provide a cost/support relationship. 11-13

2008 Tactical Wheeled Vehicles Conference (TWV) Volume 3

DTIC Science & Technology

2008-02-05

Armor/ GPK OTHER SIGNIFICANT PROCUREMENT EFFORTS Project Manager COL Scott R. Kidd Deputy PM Acquisition: Tony Shaw Deputy PM Logistics: Cesare Gaglio r...Support Modularity/ Grow the Army Full spectrum support to the War Fight & Modularity LSACM1117 ASV Production Frag Kit 5/ GPK TPE Refurb Gunner Restraint...Harness HEMTT AoA LSAC Production Objective – Gunner Protection Kit (O- GPK ) HMMWV HTV FMTV M1151/52 20 3 CSL PMs ~ Approximately 220K Systems Fielded

76 FR 40707 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-11

... training and training equipment, support equipment, U.S. Government and contractor engineering, logistics... training equipment, support equipment, U.S. Government and contractor engineering, logistics, and technical... access to SSEE Increment F services via standard Service Oriented Architecture (SOA) interfaces via...

Defense Systems Modernization and Sustainment Initiative

DTIC Science & Technology

2006-12-20

RIT is coeducational , and the 1 1 th largest privately * held university in the nation. RIT offers 350 programs of study in eight colleges including...sensors and will give warfighters a tremendous advantage in operational/logistical tempo. The full benefits of an Asset Health Management system are...Picture (COP) and Data Analysis Support Project Goal Provide a COP for use by the Marine Corps School of Infantry and analyze the Asset Health Monitoring

Development of a web service for analysis in a distributed network.

PubMed

Jiang, Xiaoqian; Wu, Yuan; Marsolo, Keith; Ohno-Machado, Lucila

2014-01-01

We describe functional specifications and practicalities in the software development process for a web service that allows the construction of the multivariate logistic regression model, Grid Logistic Regression (GLORE), by aggregating partial estimates from distributed sites, with no exchange of patient-level data. We recently developed and published a web service for model construction and data analysis in a distributed environment. This recent paper provided an overview of the system that is useful for users, but included very few details that are relevant for biomedical informatics developers or network security personnel who may be interested in implementing this or similar systems. We focus here on how the system was conceived and implemented. We followed a two-stage development approach by first implementing the backbone system and incrementally improving the user experience through interactions with potential users during the development. Our system went through various stages such as concept proof, algorithm validation, user interface development, and system testing. We used the Zoho Project management system to track tasks and milestones. We leveraged Google Code and Apache Subversion to share code among team members, and developed an applet-servlet architecture to support the cross platform deployment. During the development process, we encountered challenges such as Information Technology (IT) infrastructure gaps and limited team experience in user-interface design. We figured out solutions as well as enabling factors to support the translation of an innovative privacy-preserving, distributed modeling technology into a working prototype. Using GLORE (a distributed model that we developed earlier) as a pilot example, we demonstrated the feasibility of building and integrating distributed modeling technology into a usable framework that can support privacy-preserving, distributed data analysis among researchers at geographically dispersed institutes.

Development of a Web Service for Analysis in a Distributed Network

PubMed Central

Jiang, Xiaoqian; Wu, Yuan; Marsolo, Keith; Ohno-Machado, Lucila

2014-01-01

Objective: We describe functional specifications and practicalities in the software development process for a web service that allows the construction of the multivariate logistic regression model, Grid Logistic Regression (GLORE), by aggregating partial estimates from distributed sites, with no exchange of patient-level data. Background: We recently developed and published a web service for model construction and data analysis in a distributed environment. This recent paper provided an overview of the system that is useful for users, but included very few details that are relevant for biomedical informatics developers or network security personnel who may be interested in implementing this or similar systems. We focus here on how the system was conceived and implemented. Methods: We followed a two-stage development approach by first implementing the backbone system and incrementally improving the user experience through interactions with potential users during the development. Our system went through various stages such as concept proof, algorithm validation, user interface development, and system testing. We used the Zoho Project management system to track tasks and milestones. We leveraged Google Code and Apache Subversion to share code among team members, and developed an applet-servlet architecture to support the cross platform deployment. Discussion: During the development process, we encountered challenges such as Information Technology (IT) infrastructure gaps and limited team experience in user-interface design. We figured out solutions as well as enabling factors to support the translation of an innovative privacy-preserving, distributed modeling technology into a working prototype. Conclusion: Using GLORE (a distributed model that we developed earlier) as a pilot example, we demonstrated the feasibility of building and integrating distributed modeling technology into a usable framework that can support privacy-preserving, distributed data analysis among researchers at geographically dispersed institutes. PMID:25848586

Fabrication Infrastructure to Enable Efficient Exploration and Utilization of Space

NASA Technical Reports Server (NTRS)

Howell, Joe T.; Fikes, John C.; McLemore, Carole A.; Manning, Curtis W.; Good, Jim

2007-01-01

Unlike past one-at-a-time mission approaches, system-of-systems infrastructures will be needed to enable ambitious scenarios for sustainable future space exploration and utilization. Fabrication infrastructure will be needed to support habitat structure development, tools and mechanical part fabrication, as well as repair and replacement of ground support and space mission hardware such as life support items, vehicle components and crew systems. The fabrication infrastructure will need the In Situ Fabrication and Repair (ISFR) element, which is working in conjunction with the In Situ Resources Utilization (ISRU) element, to live off the land. The ISFR Element supports the entire life cycle of Exploration by: reducing downtime due to failed components; decreasing risk to crew by recovering quickly from degraded operation of equipment; improving system functionality with advanced geometry capabilities; and enhancing mission safety by reducing assembly part counts of original designs where possible. This paper addresses the fabrication infrastructures that support efficient, affordable, reliable infrastructures for both space exploration systems and logistics; these infrastructures allow sustained, affordable and highly effective operations on the Moon, Mars and beyond.

44 CFR 208.38 - Reimbursement for re-supply and logistics costs incurred during Activation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... this subpart, DHS will not reimburse costs incurred for re-supply and logistical support during... and logistics costs incurred during Activation. 208.38 Section 208.38 Emergency Management and...-supply and logistics costs incurred during Activation. With the exception of emergency procurement...

Space based OTV servicing

NASA Technical Reports Server (NTRS)

Mcallister, J. G.

1984-01-01

Space based servicing of an orbit transfer vehicle (OTV) was previously outlined in sufficient detail to arrive at OTV and support system servicing requirements. Needed space station facilities and their functional requirements were identified. The impact of logistics and space serviceable design on the OTV design is detailed herein. RL10 derivative rocket engine inspection task times are enumerated.

Development of a Catalytic Wet Air Oxidation Method to Produce Feedstock Gases from Waste Polymers

NASA Technical Reports Server (NTRS)

Kulis, Michael J.; Guerrero-Medina, Karen J.; Hepp, Aloysius F.

2012-01-01

Given the high cost of space launch, the repurposing of biological and plastic wastes to reduce the need for logistical support during long distance and long duration space missions has long been recognized as a high priority. Described in this paper are the preliminary efforts to develop a wet air oxidation system in order to produce fuels from waste polymers. Preliminary results of partial oxidation in near supercritical water conditions are presented. Inherent corrosion and salt precipitation are discussed as system design issues for a thorough assessment of a second generation wet air oxidation system. This work is currently being supported by the In-Situ Resource Utilization Project.

NASA Shuttle Logistics Depot (NSLD) - The application of ATE

NASA Technical Reports Server (NTRS)

Simpkins, Lorenz G.; Jenkins, Henry C.; Mauceri, A. Jack

1990-01-01

The concept of the NASA Shuttle Logistics Depot (NSLD) developed for the Space Shuttle Orbiter Program is described. The function of the NSLD at Cape Canaveral is to perform the acceptance and diagnostic testing of the Shuttle's space-rated line-replaceable units and shop-replaceable units (SRUs). The NSLD includes a comprehensive electronic automatic test station, program development stations, and assorted manufacturing support equipment (including thermal and vibration test equipment, special test equipment, and a card SRU test system). The depot activities also include the establishment of the functions for manufacturing of mechanical parts, soldering, welding, painting, clean room operation, procurement, and subcontract management.

Stability and Hopf bifurcation for a regulated logistic growth model with discrete and distributed delays

NASA Astrophysics Data System (ADS)

Fang, Shengle; Jiang, Minghui

2009-12-01

In this paper, we investigate the stability and Hopf bifurcation of a new regulated logistic growth with discrete and distributed delays. By choosing the discrete delay τ as a bifurcation parameter, we prove that the system is locally asymptotically stable in a range of the delay and Hopf bifurcation occurs as τ crosses a critical value. Furthermore, explicit algorithm for determining the direction of the Hopf bifurcation and the stability of the bifurcating periodic solutions is derived by normal form theorem and center manifold argument. Finally, an illustrative example is also given to support the theoretical results.

The Global Logistics Command: A Strategy to Sustain the Post-War Army

DTIC Science & Technology

2014-05-22

Logistics: Determining Relevance for 21st Century Operations,” 17. 56Jobson and Antell, U.S. Army Materiel Command, 23. Joseph M. Heiser Jr., “Supply...mechanization expanded. Heiser , “Supply Support in Vietnam,” 37. 24 lacked.58 He also formalized in-theater training with two teams, codenamed Project...Airborne Corps History Office, Fort Bragg, NC, 2010. Heiser , Joseph M. Jr. Vietnam Studies Logistics Support. Washington, DC: U.S. Army Center of

Space shuttle/food system study. Volume 2, Appendix G: Ground support system analysis. Appendix H: Galley functional details analysis

NASA Technical Reports Server (NTRS)

1974-01-01

The capabilities for preflight feeding of flight personnel and the supply and control of the space shuttle flight food system were investigated to determine ground support requirements; and the functional details of an onboard food system galley are shown in photographic mockups. The elements which were identified as necessary to the efficient accomplishment of ground support functions include the following: (1) administration; (2) dietetics; (3) analytical laboratories; (4) flight food warehouse; (5) stowage module assembly area; (6) launch site module storage area; (7) alert crew restaurant and disperse crew galleys; (8) ground food warehouse; (9) manufacturing facilities; (10) transport; and (11) computer support. Each element is discussed according to the design criteria of minimum cost, maximum flexibility, reliability, and efficiency consistent with space shuttle requirements. The galley mockup overview illustrates the initial operation configuration, food stowage locations, meal assembly and serving trays, meal preparation configuration, serving, trash management, and the logistics of handling and cleanup equipment.

78 FR 73504 - Procurement List; Proposed Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

... Logistics Support Detachment, Undisclosed Location*, Ft. Belvoir, VA. NPA: MVLE, Inc., Springfield, VA. Contracting Activity: Directorate of Contracting Procurement Logistics Support Detachment, Fort Belvoir, VA.... Lineback, Director, Business Operations. [FR Doc. 2013-29139 Filed 12-5-13; 8:45 am] BILLING CODE 6353-01-P ...

76 FR 45542 - Procurement List; Proposed Addition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... Feeding and Cleaning. NPA: NewView Oklahoma, Inc., Oklahoma City, OK. Contracting Activity: Defense Logistics Agency Troop Support, Philadelphia, PA. Coverage: C-List for 100% of the requirement of the Department of Defense, as aggregated by the Defense Logistics Agency Troop Support, Philadelphia, PA. Barry S...

Cargo Logistics Airlift Systems Study (CLASS). Volume 1: Analysis of current air cargo system

NASA Technical Reports Server (NTRS)

Burby, R. J.; Kuhlman, W. H.

1978-01-01

The material presented in this volume is classified into the following sections; (1) analysis of current routes; (2) air eligibility criteria; (3) current direct support infrastructure; (4) comparative mode analysis; (5) political and economic factors; and (6) future potential market areas. An effort was made to keep the observations and findings relating to the current systems as objective as possible in order not to bias the analysis of future air cargo operations reported in Volume 3 of the CLASS final report.

Algorithm and data support of traffic congestion forecasting in the controlled transport

NASA Astrophysics Data System (ADS)

Dmitriev, S. V.

2015-06-01

The topicality of problem of the traffic congestion forecasting in the logistic systems of product movement highways is considered. The concepts: the controlled territory, the highway occupancy by vehicles, the parking and the controlled territory are introduced. Technical realizabilityof organizing the necessary flow of information on the state of the transport system for its regulation has been marked. Sequence of practical implementation of the solution is given. An algorithm for predicting traffic congestion in the controlled transport system is suggested.

Mobilization and Defense Management Technical Reports Series. Acquisition of ADP (Automated Data Processing) by the Army during Mobilization.

DTIC Science & Technology

1983-03-01

have both a Federal and a State mission. The State mission is to provide protection of life and property and to preserve peace and public safety. The...logistics system is basically the same and will be integrated into the active system in wartime. Financial man- agement support consists of financial...the entire system is security. ErS is on contract to furnish basic security as well as a higher type of security known as the enhanced version

Improved Specimen-Referral System and Increased Access to Quality Laboratory Services in Ethiopia: The Role of the Public-Private Partnership.

PubMed

Kebede, Yenew; Fonjungo, Peter N; Tibesso, Gudeta; Shrivastava, Ritu; Nkengasong, John N; Kenyon, Thomas; Kebede, Amha; Gadde, Renuka; Ayana, Gonfa

2016-04-15

Nonstandardized specimen-transport logistics, lack of laboratory personnel to transport specimens, lack of standard specimen containers, and long turnaround time (TAT) hindered access to quality laboratory services. The objective of the Becton, Dickinson, and Company (BD)-US President's Emergency Plan for AIDS Relief (PEPFAR) Public-Private Partnership (PPP) was to support country-specific programs to develop integrated laboratory systems, services, and quality improvement strategies, with an emphasis on strengthening the specimen-referral system (SRS). In 2007, through the Centers for Disease Control and Prevention (CDC), the Ethiopian Public Health Institute (EPHI) joined with the BD-PEPFAR PPP to strengthen laboratory systems. A joint planning and assessment committee identified gaps in the SRS for prioritization and intervention and piloted the system in Addis Ababa and Amhara Region. The PPP established standardized, streamlined specimen logistics, using the Ethiopian Postal Service Enterprise to support a laboratory network in which 554 facilities referred specimens to 160 laboratories. The PPP supported procuring 400 standard specimen containers and the training of 586 laboratory personnel and 81 postal workers. The average TAT was reduced from 7 days (range, 2-14 days) to 2 days (range, 1-3 days) in Addis Ababa and from 10 days (range, 6-21 days) to 5 days (range, 2-6 days) in Amhara Region. This study highlights the feasibility and untapped potential of PPPs to strengthen laboratory systems. This planned and structured approach to improving specimen referral enhanced access to quality laboratory services. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

Defense Energy Support Center Fact Book, Fiscal Year 2000, Twenty-Third Edition

DTIC Science & Technology

2000-01-01

assigned to the U.S. European Command in Stuttgart, Germany from 1991 to 1994, serving in the Joint Petroleum Office as the Staff Petroleum Officer for...from July 1990 to June 1993. He then served as Logistics Officer (G4) at 3rd Corps Support Command in Wiesbaden, Germany from July 1993 to June 1995...successfully used the RDC system to collect fuel requirements for customers in the Germany PC&S and Hawaii PC&S programs. In August 2000, DESC used the

Logistical Support of a Multiple Launch Rocket System (MLRS) Battalion During Operations Desert Shield/Storm

DTIC Science & Technology

1993-04-25

assembly area (AA) was located approximately 5 km due south of the Corps’ most Forward Operating Base (FOB) Bastone . FOB Bastone was located along the...area again was 5 km south of FOB Bastone . The battalion was finally in a tactical position from which we could quickly support combat operations, if...wheel vehicles operational. We coordinated with the 12th Avn Bde headquarters, stationed at FOB Bastone , to send two NCO’s on their log bird going to

Sortie laboratory, phase B technical summary. [design and operational requirements

NASA Technical Reports Server (NTRS)

1973-01-01

The design and operational requirements which evolved from Sortie Lab (SL) analysis are summarized. A source of requirements for systems is given along with experimental support for the SL, baseline. Basic design data covered include: configuration definition, mission analysis, experimental integration, safety, and logistics. A technical summary outlines characteristics which reflect the influence of the growth in SL capability and the results of the mission and operational analysis. Each of the selected areas is described in terms of objectives, equipment, operational concept, and support requirements.

Operational support and service concepts for observatories

NASA Astrophysics Data System (ADS)

Emde, Peter; Chapus, Pierre

2014-08-01

The operational support and service for observatories aim at the provision, the preservation and the increase of the availability and performance of the entire structural, mechanical, drive and control systems of telescopes and the related infrastructure. The operational support and service levels range from the basic service with inspections, preventive maintenance, remote diagnostics and spare parts supply over the availability service with telephone hotline, online and on-site support, condition monitoring and spare parts logistics to the extended service with operations and site and facility management. For the level of improvements and lifecycle management support they consist of expert assessments and studies, refurbishments and upgrades including the related engineering and project management activities.

Space Station fluid management logistics

NASA Technical Reports Server (NTRS)

Dominick, Sam M.

1990-01-01

Viewgraphs and discussion on space station fluid management logistics are presented. Topics covered include: fluid management logistics - issues for Space Station Freedom evolution; current fluid logistics approach; evolution of Space Station Freedom fluid resupply; launch vehicle evolution; ELV logistics system approach; logistics carrier configuration; expendable fluid/propellant carrier description; fluid carrier design concept; logistics carrier orbital operations; carrier operations at space station; summary/status of orbital fluid transfer techniques; Soviet progress tanker system; and Soviet propellant resupply system observations.

Global Combat Support System - Army Did Not Comply With Treasury and DoD Financial Reporting Requirements

DTIC Science & Technology

2014-09-03

Compliance Validation: Logistics Modernization Program System Third Deployment—Selected Requirements,” July 2012 AAA Report No. A-2012-0090- FFM , “Audit... FFM , “General Fund Enterprise Business System— Federal Financial Management Improvement Act Compliance: Examination of Requirements Through Test Event...1.4.0,” September 2010 AAA Report No. A-2010-0220- FFM , “Examination of Federal Financial Management Improvement Act Compliance—Requirements

48 CFR 715.370-1 - Title XII selection procedure-general.

Code of Federal Regulations, 2010 CFR

2010-10-01

... essential, a statement of work, estimate of personnel requirements, special requirements (logistic support... statement of work, an estimate of the personnel required, and special provisions (such as logistic support, government furnished equipment, and so forth), a proposed contract format, and evaluation criteria. No cost...

78 FR 36538 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... training equipment, U.S. Government and contractor engineering, technical and logistics support services... equipment, U.S. Government and contractor engineering, technical and logistics support services, and other... central government and the country's outlying areas. The sale of these C-130Js to Libya will significantly...

Logistics, electronic commerce, and the environment

NASA Astrophysics Data System (ADS)

Sarkis, Joseph; Meade, Laura; Talluri, Srinivas

2002-02-01

Organizations realize that a strong supporting logistics or electronic logistics (e-logistics) function is important from both commercial and consumer perspectives. The implications of e-logistics models and practices cover the forward and reverse logistics functions of organizations. They also have direct and profound impact on the natural environment. This paper will focus on a discussion of forward and reverse e-logistics and their relationship to the natural environment. After discussion of the many pertinent issues in these areas, directions of practice and implications for study and research are then described.

Aerobrake concepts for NTP systems study

NASA Technical Reports Server (NTRS)

Cruz, Manuel I.

1992-01-01

Design concepts are described for landing large spacecraft masses on the Mars surface in support of manned missions with interplanetary transportation using Nuclear Thermal Propulsion (NTP). Included are the mission and systems analyses, trade studies and sensitivity analyses, design analyses, technology assessment, and derived requirements to support this concept. The mission phases include the Mars de-orbit, entry, terminal descent, and terminal touchdown. The study focuses primarily on Mars surface delivery from orbit after Mars orbit insertion using an NTP. The requirements associated with delivery of logistical supplies, habitats, and other equipment on minimum energy Earth to Mars transfers are also addressed in a preliminary fashion.

Parenting styles, parenting practices, and physical activity in 10- to 11-year olds.

PubMed

Jago, Russell; Davison, Kirsten K; Brockman, Rowan; Page, Angie S; Thompson, Janice L; Fox, Kenneth R

2011-01-01

The objective of this study was to determine whether parenting styles and practices are associated with children's physical activity. Cross-sectional survey of seven hundred ninety-two 10- to 11-year-old UK children in Bristol (UK) in 2008-2009 was conducted. Accelerometer-assessed physical activity and mean minutes of moderate-to-vigorous physical activity (mean MVPA) and mean counts per minute (mean CPM) were obtained. Maternal parenting style and physical activity parenting practices were self-reported. In regression analyses, permissive parenting was associated with higher mean MVPA among girls (+6.0 min/day, p<0.001) and greater mean CPM (+98.9 accelerometer counts/min, p=0.014) among boys when compared to children with authoritative parents. Maternal logistic support was associated with mean CPM for girls (+36.2 counts/min, p=0.001), while paternal logistic support was associated with boys' mean MVPA (+4.0 min/day, p=0.049) and mean CPM (+55.7 counts/min, p=0.014). Maternal permissive parenting was associated with higher levels of physical activity than authoritative parenting, but associations differed by child gender and type of physical activity. Maternal logistic support was associated with girls' physical activity, while paternal logistic support was associated with boys' physical activity. Health professionals could encourage parents to increase logistic support for their children's physical activity. Copyright © 2010 Elsevier Inc. All rights reserved.

Report on the Assessment of Arms, Ammunition, and Explosives Accountability and Control; Security Assistance; and Logistics Sustainment for the Iraq Security Forces

DTIC Science & Technology

2008-12-19

Undistributed ISFF-Funded Equipment 105 17. Iraqi Army Maintenance Program 107 18. Class IX Material Management 115 Part V – Medical Sustainability 123...database and are subsequently forwarded to the Army Material Command, Logistics Support Activity for inclusion in the DoD Small Arms and Light Weapons...be forwarded to the Army Material Command, Logistics Support Activity for inclusion in the DoD Small Arms and Light Weapons Serialization Program

KSC ISS Logistics Support

NASA Technical Reports Server (NTRS)

Tellado, Joseph

2014-01-01

The presentation contains a status of KSC ISS Logistics Operations. It basically presents current top level ISS Logistics tasks being conducted at KSC, current International Partner activities, hardware processing flow focussing on late Stow operations, list of KSC Logistics POC's, and a backup list of Logistics launch site services. This presentation is being given at the annual International Space Station (ISS) Multi-lateral Logistics Maintenance Control Panel meeting to be held in Turin, Italy during the week of May 13-16. The presentatiuon content doesn't contain any potential lessons learned.

2007-2008 Weapon Systems

DTIC Science & Technology

2007-01-01

240 Tactical Operations Center ( TOC ) .......................................................................242 Tactical Unmanned Aerial...4QFY06: CHS-3 contract transferred from AMCOM Acq Ctr to CECOM Acq Ctr as a result of the PD CHS move from PM TOCs /AMDCCS to PM TRCS in FY06...SALES None CONTRACTORS IRB Bays manufacturer: General Dynamics Santa Barbara Sistemas (Kaiserslautern, Germany) Logistic support: AM General (Livonia, MI

Atmosphere, Magnetosphere and Plasmas in Space (AMPS). Spacelab payload definition study. Volume 5: Technical summary

NASA Technical Reports Server (NTRS)

1976-01-01

Engineering and operational facets associated with the implementation of the first two AMPS flights are covered. The payload is described including all systems and subsystems and the mission planning and flight operations are described too. Payload integration, ground operations, and logistics are included along with key supporting analyses and mass properties.

Monitoring and telemedicine support in remote environments and in human space flight.

PubMed

Cermack, M

2006-07-01

The common features of remote environments are geographical separation, logistic problems with health care delivery and with patient retrieval, extreme natural conditions, artificial environment, or combination of all. The exposure can have adverse effects on patients' physiology, on care providers' performance and on hardware functionality. The time to definite treatment may vary between hours as in orbital space flight, days for remote exploratory camp, weeks for polar bases and months to years for interplanetary exploration. The generic system architecture, used in any telematic support, consists of data acquisition, data-processing and storage, telecommunications links, decision-making facilities and the means of command execution. At the present level of technology, a simple data transfer and two-way voice communication could be established from any place on the earth, but the current use of mobile communication technologies for telemedicine applications is still low, either for logistic, economic and political reasons, or because of limited knowledge about the available technology and procedures. Criteria for selection of portable telemedicine terminals in remote terrestrial places, characteristics of currently available mobile telecommunication systems, and the concept of integrated monitoring of physiological and environmental parameters are mentioned in the first section of this paper. The second part describes some aspects of emergency medical support in human orbital spaceflight, the limits of telemedicine support in near-Earth space environment and mentions some open issues related to long-term exploratory missions beyond the low Earth orbit.

The reuse of logistics carriers for the first lunar outpost alternative habitat study

NASA Technical Reports Server (NTRS)

Vargas, Carolina

1992-01-01

The Systems Definition Branch deals with preliminary concepts/designs of various projects currently in progress at NASA. One of these projects is called the First Lunar Outpost. The First Lunar Outpost (FLO) is a proposed permanent lunar base to be located on the moon. In order to better understand the Lunar Habitat, a detailed analysis of the lunar environment as well as conceptual studies of the physical living arrangements for the support crew is necessary. The habitat will be inhabited for a period of 45 days followed by a six month dormant period. Requirements for the habitat include radiation protection, a safe haven for occasional solar flare storms, an airlock module and consumables to support a crew of 4 with a schedule of 34 extra vehicular activities. Consumables in order to sustain a crew of four for 45 days ranges from 430 kg of food to only 15 kg for personal hygiene items. These consumables must be brought to the moon with every mission. They are transported on logistics carriers. The logistics carrier must be pressurized in order to successfully transport the consumables. Refrigeration along with other types of thermal control and variation in pressure are defined by the list of necessary consumables. The objective of the proposed work was to collaborate the Habitat Team with their study on Logistic Carriers as possible alternatives for additional habitable volume. Options for possible reuses was also determined. From this analysis, a recommended design is proposed.

The reuse of logistics carriers for the first lunar outpost alternative habitat study

NASA Astrophysics Data System (ADS)

Vargas, Carolina

1992-12-01

The Systems Definition Branch deals with preliminary concepts/designs of various projects currently in progress at NASA. One of these projects is called the First Lunar Outpost. The First Lunar Outpost (FLO) is a proposed permanent lunar base to be located on the moon. In order to better understand the Lunar Habitat, a detailed analysis of the lunar environment as well as conceptual studies of the physical living arrangements for the support crew is necessary. The habitat will be inhabited for a period of 45 days followed by a six month dormant period. Requirements for the habitat include radiation protection, a safe haven for occasional solar flare storms, an airlock module and consumables to support a crew of 4 with a schedule of 34 extra vehicular activities. Consumables in order to sustain a crew of four for 45 days ranges from 430 kg of food to only 15 kg for personal hygiene items. These consumables must be brought to the moon with every mission. They are transported on logistics carriers. The logistics carrier must be pressurized in order to successfully transport the consumables. Refrigeration along with other types of thermal control and variation in pressure are defined by the list of necessary consumables. The objective of the proposed work was to collaborate the Habitat Team with their study on Logistic Carriers as possible alternatives for additional habitable volume. Options for possible reuses was also determined. From this analysis, a recommended design is proposed.

Detecting Dementia Through Interactive Computer Avatars

PubMed Central

Adachi, Hiroyoshi; Ukita, Norimichi; Ikeda, Manabu; Kazui, Hiroaki; Kudo, Takashi; Nakamura, Satoshi

2017-01-01

This paper proposes a new approach to automatically detect dementia. Even though some works have detected dementia from speech and language attributes, most have applied detection using picture descriptions, narratives, and cognitive tasks. In this paper, we propose a new computer avatar with spoken dialog functionalities that produces spoken queries based on the mini-mental state examination, the Wechsler memory scale-revised, and other related neuropsychological questions. We recorded the interactive data of spoken dialogues from 29 participants (14 dementia and 15 healthy controls) and extracted various audiovisual features. We tried to predict dementia using audiovisual features and two machine learning algorithms (support vector machines and logistic regression). Here, we show that the support vector machines outperformed logistic regression, and by using the extracted features they classified the participants into two groups with 0.93 detection performance, as measured by the areas under the receiver operating characteristic curve. We also newly identified some contributing features, e.g., gap before speaking, the variations of fundamental frequency, voice quality, and the ratio of smiling. We concluded that our system has the potential to detect dementia through spoken dialog systems and that the system can assist health care workers. In addition, these findings could help medical personnel detect signs of dementia. PMID:29018636

Integration mockup and process material management system

NASA Technical Reports Server (NTRS)

Verble, Adas James, Jr.

1992-01-01

Work to define and develop a full scale Space Station Freedom (SSF) mockup with the flexibility to evolve into future designs, to validate techniques for maintenance and logistics and verify human task allocations and support trade studies is described. This work began in early 1985 and ended in August, 1991. The mockups are presently being used at MSFC in Building 4755 as a technology and design testbed, as well as for public display. Micro Craft also began work on the Process Material Management System (PMMS) under this contract. The PMMS simulator was a sealed enclosure for testing to identify liquids, gaseous, particulate samples, and specimen including, urine, waste water, condensate, hazardous gases, surrogate gasses, liquids, and solids. The SSF would require many trade studies to validate techniques for maintenance and logistics and verify system task allocations; it was necessary to develop a full scale mockup which would be representative of current SSF design with the ease of changing those designs as the SSF design evolved and changed. The tasks defined for Micro Craft were to provide the personnel, services, tools, and materials for the SSF mockup which would consist of four modules, nodes, interior components, and part task mockups of MSFC responsible engineering systems. This included the Engineering Control and Life Support Systems (ECLSS) testbed. For the initial study, the mockups were low fidelity, soft mockups of graphics art bottle, and other low cost materials, which evolved into higher fidelity mockups as the R&D design evolved, by modifying or rebuilding, an important cost saving factor in the design process. We designed, fabricated, and maintained the full size mockup shells and support stands. The shells consisted of cylinders, end cones, rings, longerons, docking ports, crew airlocks, and windows. The ECLSS required a heavier cylinder to support the ECLSS systems test program. Details of this activity will be covered. Support stands were designed and built for each module to sufficiently move and rotate each module. Secondary structures such as floors, ceilings, bulkheads, standoffs, racks, etc. were developed and built.

Integrated Science and Logistical Planning to Support Big Questions in Antarctic Science

NASA Astrophysics Data System (ADS)

Vaughan, D. G.; Stockings, T. M.

2015-12-01

Each year, British Antarctic Survey (BAS) supports an extensive programme of science at five Antarctic and sub-Antarctic stations, ranging from the tiny Bird Island Research Station at 54°S in the South Atlantic, to the massive, and fully re-locatable, Halley Research Station on Brunt Ice Shelf at 75°S. The BAS logistics hub, Rothera Research Station on the Antarctic Peninsula supports deployment of deep-field and airborne field campaigns through much of the Antarctic continent, and an innovative new UK polar research vessel is under design, and planned to enter service in the Southern Ocean in 2019. BAS's core science programme covering all aspects of physical, biological and geological science is delivered by our own science teams, but every year many other UK scientists and overseas collaborators also access BAS's Antarctic logistics to support their own programmes. As an integrated science and logistics provider, BAS is continuously reviewing its capabilities and operational procedures to ensure that the future long-term requirements of science are optimally supported. Current trends are towards providing the capacity for heavier remote operations and larger-scale field camps, increasing use of autonomous ocean and airborne platforms, and increasing opportunities to provide turnkey solutions for low-cost experimental deployments. This talk will review of expected trends in Antarctic science and the opportunities to conduct science in Antarctica. It will outline the anticipated logistic developments required to support future stakeholder-led and strategically-directed science programmes, and the long-term ambitions of our science communities indentified in several recent horizon-scanning activities.

An Investigation into the Prioritization of Air Force Civil Engineering Structural Maintenance Decisions.

DTIC Science & Technology

1981-09-01

Systems and Logistics AREA &WORIUNITNUMUERS Air Force Institute of Technology WPAFB OH 11. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE Department of...consists of a cursory glance at structural members located in easily accessable areas and many critical parts of the facility go unnoticed. A counterpart...too far, If inspection teams can be persuaded to take a little extra time to inspect obscure areas of a structural support system and educated with

Medical Acquisition shelf-Life System (MASS) Decision Support Model Systems Documentation

DTIC Science & Technology

1989-05-01

9 I INTRODUCTI ON A. Background In October 1987, LTG Russo hosted a conference with the Military Service Logistics Chiefs...A42,F6.3,F6.2,F9.2,F3.1,AIS,F9.1,A9,F9.0,AI7,F9.0,A9, 00032220 + F5.4,F5.4,F7.4, FIO .0) 00032320 IF(ADQ.EQ.0.O)THEN 00032420 ADQ=QFD*4.0 00032520 END

The Logistics Equipment Carbon Emission Monitoring System for a Green Logistics

NASA Astrophysics Data System (ADS)

Choi, Hyungrim; Park, Byoungkwon; Lee, Byungha; Park, Yongsung; Lee, Changsup; Ha, Jeongsoo

Recently, due to the global enforcement of obligations to reduce green house gases and various environmental regulations, low carbon green growth strategies are required. Currently, in our country, environment friendly logistics activities are staying in the early stage compared to advanced countries because of our country's large energy consumption type industrial structures. As a measure to respond to the trend of the reinforcement of international environmental regulations in the sector of logistics, active green logistics systems should be established and to solve this problem, this study is intended to develop a monitoring system that can manage the carbon emission of logistics equipment(container truck, discharging equipment etc) in real time using a new technology named IP-RFID. The monitoring system developed in this study can actively manage the carbon emission of individual logistics equipment by attaching IP-Tags that can measure the carbon emission of individual logistics equipment in real time and transmit the information obtained from the measurement directly to users through IP communication. Since carbon emission can be managed by logistics equipment and drivers can check the carbon emission of equipment through this system, the carbon emission generated in the logistics sector may be reduced by using this system.

Gathering Information from Transport Systems for Processing in Supply Chains

NASA Astrophysics Data System (ADS)

Kodym, Oldřich; Unucka, Jakub

2016-12-01

Paper deals with complex system for processing information from means of transport acting as parts of train (rail or road). It focuses on automated information gathering using AutoID technology, information transmission via Internet of Things networks and information usage in information systems of logistic firms for support of selected processes on MES and ERP levels. Different kinds of gathered information from whole transport chain are discussed. Compliance with existing standards is mentioned. Security of information in full life cycle is integral part of presented system. Design of fully equipped system based on synthesized functional nodes is presented.

Converting information from paper to optical media

NASA Technical Reports Server (NTRS)

Deaton, Timothy N.; Tiller, Bruce K.

1990-01-01

The technology of converting large amounts of paper into electronic form is described for use in information management systems based on optical disk storage. The space savings and photographic nature of microfiche are combined in these systems with the advantages of computerized data (fast and flexible retrieval of graphics and text, simultaneous instant access for multiple users, and easy manipulation of data). It is noted that electronic imaging systems offer a unique opportunity to dramatically increase the productivity and profitability of information systems. Particular attention is given to the CALS (Computer-aided Aquisition and Logistic Support) system.

76 FR 60459 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... Consideration for Purchase: continuation of a pilot training program and logistics support for F-16 aircraft at... program and logistics support for F-16 aircraft at Luke Air Force Base, Arizona to include flight training..., which will contribute to an acceptable military balance in the area. This proposed sale is consistent...

77 FR 52698 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

... training equipment, publications and technical data, U.S. Government and contractor technical and logistics personnel services and other related elements of program and logistics support. (iv) Military Department..., publications and technical data, U.S. Government and contractor technical and logistics personnel services and...

Logistics Needs for Potential Deep Space Mission Scenarios Post Asteroid Redirect Crewed Mission

NASA Technical Reports Server (NTRS)

Lopez, Pedro, Jr.; Shultz, Eric; Mattfeld, Bryan; Stromgren, Chel; Goodliff, Kandyce

2015-01-01

The Asteroid Redirect Mission (ARM) is currently being explored as the next step towards deep space human exploration, with the ultimate goal of reaching Mars. NASA is currently investigating a number of potential human exploration missions, which will progressively increase the distance and duration that humans spend away from Earth. Missions include extended human exploration in cis-lunar space which, as conceived, would involve durations of around 60 days, and human missions to Mars, which are anticipated to be as long as 1000 days. The amount of logistics required to keep the crew alive and healthy for these missions is significant. It is therefore important that the design and planning for these missions include accurate estimates of logistics requirements. This paper provides a description of a process and calculations used to estimate mass and volume requirements for crew logistics, including consumables, such as food, personal items, gasses, and liquids. Determination of logistics requirements is based on crew size, mission duration, and the degree of closure of the environmental control life support system (ECLSS). Details are provided on the consumption rates for different types of logistics and how those rates were established. Results for potential mission scenarios are presented, including a breakdown of mass and volume drivers. Opportunities for mass and volume reduction are identified, along with potential threats that could possibly increase requirements.

ISS ECLSS: 3 Years of Logistics for Maintenance

NASA Technical Reports Server (NTRS)

Shkedi, Brienne; Thompson, Dean

2004-01-01

The International Space Station (ISS) Environmental Control and Life Support System (ECLSS) is designed to be maintainable. During the 3 years since the ISS US Lab became operational, there have been numerous ECLSS Orbital Replacement Units (ORUs) launched and returned to Maintain the ECLSS operation in the US segments. The maintenance logistics have provided tools for maintenance, replaced limited life ORUs and failed ORUs, upgraded ECLSS hardware to improve reliability and placed critical spares onboard prior to need. In most cases, the removed ORUs have been returned for either failure analysis and repair or refurbishment. This paper describes the ECLSS manifesting history and maintenance events and quantifies the numbers of ECLSS items, weights, and volumes.

Application of wireless sensor network technology in logistics information system

NASA Astrophysics Data System (ADS)

Xu, Tao; Gong, Lina; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

2017-04-01

This paper introduces the basic concepts of active RFID (WSN-ARFID) based on wireless sensor networks and analyzes the shortcomings of the existing RFID-based logistics monitoring system. Integrated wireless sensor network technology and the scrambling point of RFID technology. A new real-time logistics detection system based on WSN and RFID, a model of logistics system based on WSN-ARFID is proposed, and the feasibility of this technology applied to logistics field is analyzed.

Parenting styles, parenting practices, and physical activity in 10- to 11-year olds

PubMed Central

Jago, Russell; Davison, Kirsten K.; Brockman, Rowan; Page, Angie S.; Thompson, Janice L.; Fox, Kenneth R.

2011-01-01

Objective The objective of this study was to determine whether parenting styles and practices are associated with children's physical activity. Methods Cross-sectional survey of seven hundred ninety-two 10- to 11-year-old UK children in Bristol (UK) in 2008–2009 was conducted. Accelerometer-assessed physical activity and mean minutes of moderate-to-vigorous physical activity (mean MVPA) and mean counts per minute (mean CPM) were obtained. Maternal parenting style and physical activity parenting practices were self-reported. Results In regression analyses, permissive parenting was associated with higher mean MVPA among girls (+ 6.0 min/day, p < 0.001) and greater mean CPM (+ 98.9 accelerometer counts/min, p = 0.014) among boys when compared to children with authoritative parents. Maternal logistic support was associated with mean CPM for girls (+ 36.2 counts/min, p = 0.001), while paternal logistic support was associated with boys' mean MVPA (+ 4.0 min/day, p = 0.049) and mean CPM (+ 55.7 counts/min, p = 0.014). Conclusions Maternal permissive parenting was associated with higher levels of physical activity than authoritative parenting, but associations differed by child gender and type of physical activity. Maternal logistic support was associated with girls' physical activity, while paternal logistic support was associated with boys' physical activity. Health professionals could encourage parents to increase logistic support for their children's physical activity. PMID:21070805

Operational and support considerations in standardization

NASA Astrophysics Data System (ADS)

Oreilly, W. T.

Military applications in the era of the 1990's and beyond, require capabilities beyond those available in most existing systems. These capabilities must be provided in a manner that will achieve a low logistic support cost and that can be maintained with relatively inexperienced personnel. This paper presents the design considerations that must be addressed in each of the standardized subsystems and modules that will provide the operational and support needs for tomorrow and beyond. Advanced maintenance concepts, such as two and one level maintenance, are described together with the operational and life cycle cost benefits that will be achieved. A new operation concept called deferred maintenance, which provides sustained operation without maintenance support, is presented. The fault tolerant architecture which will permit a standardized modular design to efficiently accommodate a variety of system applications is presented. The concerns discussed include combat damage survivability, fail safe and fail operational needs, as well as high availability for long life applications as is required for systems employed in the Space Defense Initiative (SDI).

Global Combat Support System-Marine Corps Logistics Chain Management Increment 1 (GCSS-MC LCM Inc 1)

DTIC Science & Technology

2016-03-01

Production Document DAE - Defense Acquisition Executive DoD - Department of Defense DoDAF - DoD Architecture Framework FD - Full Deployment FDD ...Jul 2004 Milestone B Jun 2007 Jun 2007 Milestone C May 2010 May 2010 FDD Sep 2014 Mar 2015 FD Dec 2015 Dec 2015 GCSS-MC LCM Inc 1 2016 MAR

Mathematical Modeling for Optimal System Testing under Fixed-cost Constraint

DTIC Science & Technology

2009-04-22

Logistics Network Strategic Sourcing Program Management Building Collaborative Capacity Business Process Reengineering (BPR) for LCS Mission...research presented at the symposium was supported by the Acquisition Chair of the Graduate School of Business & Public Policy at the Naval...James B. Greene, RADM, USN, (Ret) Acquisition Chair Graduate School of Business and Public Policy Naval Postgraduate School 555 Dyer Road, Room

Logistic support provided to Australian disaster medical assistance teams: results of a national survey of team members

PubMed Central

Aitken, Peter; Leggat, Peter; Harley, Hazel; Speare, Richard; Leclercq, Muriel

2012-01-01

Background It is likely that calls for disaster medical assistance teams (DMATs) continue in response to international disasters. As part of a national survey, the present study was designed to evaluate the Australian DMAT experience and the need for logistic support. Methods Data were collected via an anonymous mailed survey distributed via State and Territory representatives on the Australian Health Protection Committee, who identified team members associated with Australian DMAT deployments from the 2004 Asian Tsunami disaster. Results The response rate for this survey was 50% (59/118). Most of the personnel had deployed to the South East Asian Tsunami affected areas. The DMAT members had significant clinical and international experience. There was unanimous support for dedicated logistic support with 80% (47/59) strongly agreeing. Only one respondent (2%) disagreed with teams being self sufficient for a minimum of 72 hours. Most felt that transport around the site was not a problem (59%; 35/59), however, 34% (20/59) felt that transport to the site itself was problematic. Only 37% (22/59) felt that pre-deployment information was accurate. Communication with local health providers and other agencies was felt to be adequate by 53% (31/59) and 47% (28/59) respectively, while only 28% (17/59) felt that documentation methods were easy to use and reliable. Less than half (47%; 28/59) felt that equipment could be moved easily between areas by team members and 37% (22/59) that packaging enabled materials to be found easily. The maximum safe container weight was felt to be between 20 and 40 kg by 58% (34/59). Conclusions This study emphasises the importance of dedicated logistic support for DMAT and the need for teams to be self sufficient for a minimum period of 72 hours. There is a need for accurate pre deployment information to guide resource prioritisation with clearly labelled pre packaging to assist access on site. Container weights should be restricted to between 20 and 40 kg, which would assist transport around the site, while transport to the site was seen as problematic. There was also support for training of all team members in use of basic equipment such as communications equipment, tents and shelters and water purification systems. PMID:22461849

Newborn screening progress in developing countries--overcoming internal barriers.

PubMed

Padilla, Carmencita D; Krotoski, Danuta; Therrell, Bradford L

2010-04-01

Newborn screening is an important public health measure aimed at early identification and management of affected newborns thereby lowering infant morbidity and mortality. It is a comprehensive system of education, screening, follow-up, diagnosis, treatment/management, and evaluation that must be institutionalized and sustained within public health systems often challenged by economic, political, and cultural considerations. As a result, developing countries face unique challenges in implementing and expanding newborn screening that can be grouped into the following categories: (1) planning, (2) leadership, (3) medical support, (4) technical support, (5) logistical support, (6) education, (7) protocol and policy development, (8) administration, (9) evaluation, and (10) sustainability. We review some of the experiences in overcoming implementation challenges in developing newborn screening programs, and discuss recent efforts to encourage increased newborn screening through support networking and information exchange activities in 2 regions-the Asia Pacific and the Middle East/North Africa. Copyright 2010 Elsevier Inc. All rights reserved.

Lignocellulosic crop supply chains (eg, Miscanthus, switchgrass, reed canary grass, rye, giant reed, etc.) Chapter 12 of "Biomass Supply Chains for Bioenergy and Biorefining"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roni, Mohammad S.; Cafferty, Kara G.; Hess, J. Richard

This chapter provides an overview of lignocellulosic crop supply chains such as Miscanthus, switch grass, reed canary grass, rye, and giant reed by outlining typical logistic operations in support of a liquid biofuel market. We present two strategies for managing feedstocks within the biomass supply system: (1) the conventional bale feedstock supply system and (2) the advanced supply system concept. Finally, we discuss feedstock blending and integrated landscape management as innovative improvements to the lignocellulosic crop supply chain.

Service on demand for ISS users

NASA Astrophysics Data System (ADS)

Hüser, Detlev; Berg, Marco; Körtge, Nicole; Mildner, Wolfgang; Salmen, Frank; Strauch, Karsten

2002-07-01

Since the ISS started its operational phase, the need of logistics scenarios and solutions, supporting the utilisation of the station and its facilities, becomes increasingly important. Our contribution to this challenge is a SERVICE On DEMAND for ISS users, which offers a business friendly engineering and logistics support for the resupply of the station. Especially the utilisation by commercial and industrial users is supported and simplified by this service. Our industrial team, consisting of OHB-System and BEOS, provides experience and development support for space dedicated hard- and software elements, their transportation and operation. Furthermore, we operate as the interface between customer and the envisaged space authorities. Due to a variety of tailored service elements and the ongoing servicing, customers can concentrate on their payload content or mission objectives and don't have to deal with space-specific techniques and regulations. The SERVICE On DEMAND includes the following elements: ITR is our in-orbit platform service. ITR is a transport rack, used in the SPACEHAB logistics double module, for active and passive payloads on subrack- and drawer level of different standards. Due to its unique late access and early retrieval capability, ITR increases the flexibility concerning transport capabilities to and from the ISS. RIST is our multi-functional test facility for ISPR-based experiment drawer and locker payloads. The test program concentrates on physical and functional interface and performance testing at the payload developers site prior to the shipment to the integration and launch. The RIST service program comprises consulting, planning and engineering as well. The RIST test suitcase is planned to be available for lease or rent to users, too. AMTSS is an advanced multimedia terminal consulting service for communication with the space station scientific facilities, as part of the user home-base. This unique ISS multimedia kit combines communication technologies, software tools and hardware to provide a simple and cost-efficient access to data from the station, using the interconnection ground subnetwork. BEOLOG is our efficient ground logistics service for the transportation of payload hardware and support equipment from the user location to the launch/landing sites for the ISS service flights and back home. The main function of this service is the planning and organisation of all packaging, handling, storage & transportation tasks according to international rules. In conclusion, we offer novel service elements for logistics ground- and flight-infrastructure, dedicated for ISS users. These services can be easily adapted to the needs of users and are suitable for other μg- platforms as well.

Computer-aided acquisition and logistics support (CALS): Concept of Operations for Depot Maintenance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bourgeois, N.C.; Greer, D.K.

1993-04-01

This CALS Concept of Operations for Depot Maintenance provides the foundation strategy and the near term tactical plan for CALS implementation in the depot maintenance environment. The user requirements enumerated and the overarching architecture outlined serve as the primary framework for implementation planning. The seamless integration of depot maintenance business processes and supporting information systems with the emerging global CALS environment will be critical to the efficient realization of depot user's information requirements, and as, such will be a fundamental theme in depot implementations.

Using Heuristics for Supportability Analysis of Adaptive Weapon Systems in Combat

DTIC Science & Technology

2017-01-01

a n/a Customer Requirements Im p o rt an ce w ei g ht f ac to r F o rc e to o p en E xt er na l d im en si o ns C D p o si ti o ni ng f ea tu...usually include Contractor Logistics Support (CLS), and the contract structure normally incentivizes CLS to exceed the KPP Operational Readiness...adaptive baseline, a viable plan for maximizing availability and reducing costs would involve an early design effort for replacing contractor maintenance

Logistics hardware and services control system

NASA Technical Reports Server (NTRS)

Koromilas, A.; Miller, K.; Lamb, T.

1973-01-01

Software system permits onsite direct control of logistics operations, which include spare parts, initial installation, tool control, and repairable parts status and control, through all facets of operations. System integrates logistics actions and controls receipts, issues, loans, repairs, fabrications, and modifications and assets in predicting and allocating logistics parts and services effectively.

USAREUR LOGISTIC MANAGEMENT INFORMATION SYSTEM - 360 DAY BRIEFING.

DTIC Science & Technology

Information System . This report is the 360 Day Briefing presented to the DCSLOG and his Logistic Management Information System Committee at the conclusion of the study. (Author)...objective of the study was to provide for the Deputy Chief of Staff for Logistics, Headquarters USAREUR and Seventh Army, a Logistic Management

Fleet logistics system : data administration plans and procedures manual

DOT National Transportation Integrated Search

1996-01-23

This manual provides data administration (DA) procedures for developers and maintainers of Coast Guard fleet logistics information systems. Fleet logistics includes a community of supply, logistics, maintenance, and shipboard functions. The informati...

Space station: Cost and benefits

NASA Technical Reports Server (NTRS)

1983-01-01

Costs for developing, producing, operating, and supporting the initial space station, a 4 to 8 man space station, and a 4 to 24 man space station are estimated and compared. These costs include contractor hardware; space station assembly and logistics flight costs; and payload support elements. Transportation system options examined include orbiter modules; standard and extended duration STS fights; reusable spacebased perigee kick motor OTV; and upper stages. Space station service charges assessed include crew hours; energy requirements; payload support module storage; pressurized port usage; and OTV service facility. Graphs show costs for science missions, space processing research, small communication satellites; large GEO transportation; OVT launch costs; DOD payload costs, and user costs.

An Organizational Knowledge Ontology for Automotive Supply Chains

NASA Astrophysics Data System (ADS)

Hellingrath, Bernd; Witthaut, Markus; Böhle, Carsten; Brügger, Stephan

The currently completed ILIPT (Intelligent Logistics for Innovative Product Technologies) project was concerned with the concept of the “5 day car” (a customized car that is delivered within five days after its ordering) and encompassed extensive research on the required production and logistics network structures and processes. As car manufacturers in the automotive industry (commonly referred to as OEMs) rely heavily on their suppliers, the major challenge lies in the organization of inter-enterprise cooperation supported by information systems (IS) in an efficient manner. A common understanding of supply chain concepts is indispensable for this. Ontologies as formal representations of concepts can be used as a semantic basis for cooperation. Relevant results from ILIPT are presented followed by a concept as well as a prototype of how to transfer the theoretical findings to a practical implementation, in this case a multi-agent system.

78 FR 50043 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

...-Processor (RMP) Block I 92H Missiles, 13 AN/MPQ-64F1 SENTINEL Radars, 7 AN/YSQ-184D Forward Area Air Defense... logistics support services, and other related elements of logistics support. (iv) Military Department: Army... SENTINEL Radars, 7 AN/YSQ-184D Forward Area Air Defense Command, Control, and Intelligence (FAAD C2I...

The Impact of Implementing a Demand Forecasting System into a Low-Income Country’s Supply Chain

PubMed Central

Mueller, Leslie E.; Haidari, Leila A.; Wateska, Angela R.; Phillips, Roslyn J.; Schmitz, Michelle M.; Connor, Diana L.; Norman, Bryan A.; Brown, Shawn T.; Welling, Joel S.; Lee, Bruce Y.

2016-01-01

OBJECTIVE To evaluate the potential impact and value of applications (e.g., ordering levels, storage capacity, transportation capacity, distribution frequency) of data from demand forecasting systems implemented in a lower-income country’s vaccine supply chain with different levels of population change to urban areas. MATERIALS AND METHODS Using our software, HERMES, we generated a detailed discrete event simulation model of Niger’s entire vaccine supply chain, including every refrigerator, freezer, transport, personnel, vaccine, cost, and location. We represented the introduction of a demand forecasting system to adjust vaccine ordering that could be implemented with increasing delivery frequencies and/or additions of cold chain equipment (storage and/or transportation) across the supply chain during varying degrees of population movement. RESULTS Implementing demand forecasting system with increased storage and transport frequency increased the number of successfully administered vaccine doses and lowered the logistics cost per dose up to 34%. Implementing demand forecasting system without storage/transport increases actually decreased vaccine availability in certain circumstances. DISCUSSION The potential maximum gains of a demand forecasting system may only be realized if the system is implemented to both augment the supply chain cold storage and transportation. Implementation may have some impact but, in certain circumstances, may hurt delivery. Therefore, implementation of demand forecasting systems with additional storage and transport may be the better approach. Significant decreases in the logistics cost per dose with more administered vaccines support investment in these forecasting systems. CONCLUSION Demand forecasting systems have the potential to greatly improve vaccine demand fulfillment, and decrease logistics cost/dose when implemented with storage and transportation increases direct vaccines. Simulation modeling can demonstrate the potential health and economic benefits of supply chain improvements. PMID:27219341

The impact of implementing a demand forecasting system into a low-income country's supply chain.

PubMed

Mueller, Leslie E; Haidari, Leila A; Wateska, Angela R; Phillips, Roslyn J; Schmitz, Michelle M; Connor, Diana L; Norman, Bryan A; Brown, Shawn T; Welling, Joel S; Lee, Bruce Y

2016-07-12

To evaluate the potential impact and value of applications (e.g. adjusting ordering levels, storage capacity, transportation capacity, distribution frequency) of data from demand forecasting systems implemented in a lower-income country's vaccine supply chain with different levels of population change to urban areas. Using our software, HERMES, we generated a detailed discrete event simulation model of Niger's entire vaccine supply chain, including every refrigerator, freezer, transport, personnel, vaccine, cost, and location. We represented the introduction of a demand forecasting system to adjust vaccine ordering that could be implemented with increasing delivery frequencies and/or additions of cold chain equipment (storage and/or transportation) across the supply chain during varying degrees of population movement. Implementing demand forecasting system with increased storage and transport frequency increased the number of successfully administered vaccine doses and lowered the logistics cost per dose up to 34%. Implementing demand forecasting system without storage/transport increases actually decreased vaccine availability in certain circumstances. The potential maximum gains of a demand forecasting system may only be realized if the system is implemented to both augment the supply chain cold storage and transportation. Implementation may have some impact but, in certain circumstances, may hurt delivery. Therefore, implementation of demand forecasting systems with additional storage and transport may be the better approach. Significant decreases in the logistics cost per dose with more administered vaccines support investment in these forecasting systems. Demand forecasting systems have the potential to greatly improve vaccine demand fulfilment, and decrease logistics cost/dose when implemented with storage and transportation increases. Simulation modeling can demonstrate the potential health and economic benefits of supply chain improvements. Copyright © 2016 Elsevier Ltd. All rights reserved.

Report of the first annual airborne weapons training technology review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snyder, C.E.; Payne, G.B.; Treitler, I.E.

1990-01-01

This report documents the First Annual Airborne Weapons Training Technology Review. The Review was held at Oak Ridge Associated Universities from March 29 to 31, 1989. It was an exchange of ideas and information among the members of the network supporting the Naval Air Systems Command's (NAVAIR's) PMA205-11, Program Manager for Ordnance Training. This report describes the briefings and demonstrations presented at the Review, and summarizes the discussion at the informal caucus where significant issues were raised from the first two days' presentations. The report also contains the meeting agenda, a participant list with addresses and telephone numbers, a listmore » of the Department of Defense activities represented, NAVAIR's follow-up communication, and a brief description of Martin Marietta Energy Systems, Inc.'s training technology project support. A broad range of topics related to training systems and training support was covered during the Review. Synopses of the presentations and demonstrations included here cover computer-based and interactive systems, portability of software, reuse of training systems for different weapons, standardization of trainers, instructional systems design, cognitive task analysis, tracking of training resources, and the application of Computer-aided Acquisition and Logistic Support.« less

The Battle Command Sustainment Support System: The Army’s Command and Control System for Logistics

DTIC Science & Technology

2009-05-21

threaten the Austrian forward element near Ulm. 3 Later in the 19 th century, railroads played a key role in the U.S. Civil War. Gauge disparities on...and accuracy of those reports played an integral role in the decisions the commander chose to make. The Army began making a concerted effort to...40 Dave Cammons, John Tisserand, Duane Williams, Alan Seise and Dough Lindsay, ―Network Centric Warfare Case Study: U.S. V Corps

United States Air Force Statistical Digest, Fiscal Year 2001

DTIC Science & Technology

2001-09-30

FORCES 756 750 753 32 CIVIL ENGINEERING 1,434 1,402 1,351 33 COMM- COMPUTER SYSTEMS 4,124 4,090 4,038 34 MORALE, WELFARE, REC, & SERVICES 339 348 368...AND WEAPONS 14,863 14,671 14,137 3A INFORMATION MANAGEMENT 11,706 11,562 10,716 3C COMMUNICATIONS- COMPUTER SYSTEMS 13,130 13,290 13,407 3E CIVIL...146 134 114 110 112 Air Logistics Center Aug - - - - - 7 Base Communciation - - - - - 18 Base Ops Support - 17 22 19 29 47

Use of Ubiquitous Technologies in Military Logistic System in Iran

NASA Astrophysics Data System (ADS)

Jafari, P.; Sadeghi-Niaraki, A.

2013-09-01

This study is about integration and evaluation of RFID and ubiquitous technologies in military logistic system management. Firstly, supply chain management and the necessity of a revolution in logistic systems especially in military area, are explained. Secondly RFID and ubiquitous technologies and the advantages of their use in supply chain management are introduced. Lastly a system based on these technologies for controlling and increasing the speed and accuracy in military logistic system in Iran with its unique properties, is presented. The system is based on full control of military logistics (supplies) from the time of deployment to replenishment using sensor network, ubiquitous and RFID technologies.

Support vector machine learning model for the prediction of sentinel node status in patients with cutaneous melanoma.

PubMed

Mocellin, Simone; Ambrosi, Alessandro; Montesco, Maria Cristina; Foletto, Mirto; Zavagno, Giorgio; Nitti, Donato; Lise, Mario; Rossi, Carlo Riccardo

2006-08-01

Currently, approximately 80% of melanoma patients undergoing sentinel node biopsy (SNB) have negative sentinel lymph nodes (SLNs), and no prediction system is reliable enough to be implemented in the clinical setting to reduce the number of SNB procedures. In this study, the predictive power of support vector machine (SVM)-based statistical analysis was tested. The clinical records of 246 patients who underwent SNB at our institution were used for this analysis. The following clinicopathologic variables were considered: the patient's age and sex and the tumor's histological subtype, Breslow thickness, Clark level, ulceration, mitotic index, lymphocyte infiltration, regression, angiolymphatic invasion, microsatellitosis, and growth phase. The results of SVM-based prediction of SLN status were compared with those achieved with logistic regression. The SLN positivity rate was 22% (52 of 234). When the accuracy was > or = 80%, the negative predictive value, positive predictive value, specificity, and sensitivity were 98%, 54%, 94%, and 77% and 82%, 41%, 69%, and 93% by using SVM and logistic regression, respectively. Moreover, SVM and logistic regression were associated with a diagnostic error and an SNB percentage reduction of (1) 1% and 60% and (2) 15% and 73%, respectively. The results from this pilot study suggest that SVM-based prediction of SLN status might be evaluated as a prognostic method to avoid the SNB procedure in 60% of patients currently eligible, with a very low error rate. If validated in larger series, this strategy would lead to obvious advantages in terms of both patient quality of life and costs for the health care system.

Logistical Support for the Heavy-Light Mix,

DTIC Science & Technology

1988-01-20

determination to learn from history. While the physical ability to support this force is marginal, the logistical procedures, concepts of support, and a...others. £ They emphasized arni-or and mechanized in 4 antry which could keep pace with the tanks. 2 -- t. - - - - *i . h -I. -o, ., . i. . -. rJIPT...Army received a costly review of the combined arms lessons learned during WW II. In June. 1950, the North Korean Army launched an all-out attack into

Research and design of logistical information system based on SOA

NASA Astrophysics Data System (ADS)

Zhang, Bo

2013-03-01

Through the study on the existing logistics information systems and SOA technology, based on the current situation of enterprise logistics management and business features, this paper puts forward a SOA-based logistics system design program. This program is made in the WCF framework, with the combination of SOA and the actual characteristics of logistics enterprises, is simple to realize, easy to operate, and has strong expansion characteristic, therefore has high practical value.

The Evolution of Centralized Operational Logistics

DTIC Science & Technology

2012-05-17

John Kennedy Ohl, Supplying the Troops, General Somervell and American Logistics in WWII (DeKalb: Northern Illinois University Press, 1994), 60-61. 8...logistics support to the Military Assistance Command Vietnam. Although Admiral John H. Sides, the Commander in Chief, Pacific Fleet, did not want to...Delivering the Goods: The Art of Managing Your Supply Chain (Hoboken: John Wiley and Sons, Inc., 2002), 78. 55 Shrader, United States Army Logistics 1775

A Clinical Decision Support System for Breast Cancer Patients

NASA Astrophysics Data System (ADS)

Fernandes, Ana S.; Alves, Pedro; Jarman, Ian H.; Etchells, Terence A.; Fonseca, José M.; Lisboa, Paulo J. G.

This paper proposes a Web clinical decision support system for clinical oncologists and for breast cancer patients making prognostic assessments, using the particular characteristics of the individual patient. This system comprises three different prognostic modelling methodologies: the clinically widely used Nottingham prognostic index (NPI); the Cox regression modelling and a partial logistic artificial neural network with automatic relevance determination (PLANN-ARD). All three models yield a different prognostic index that can be analysed together in order to obtain a more accurate prognostic assessment of the patient. Missing data is incorporated in the mentioned models, a common issue in medical data that was overcome using multiple imputation techniques. Risk group assignments are also provided through a methodology based on regression trees, where Boolean rules can be obtained expressed with patient characteristics.

Propensity score estimation: neural networks, support vector machines, decision trees (CART), and meta-classifiers as alternatives to logistic regression.

PubMed

Westreich, Daniel; Lessler, Justin; Funk, Michele Jonsson

2010-08-01

Propensity scores for the analysis of observational data are typically estimated using logistic regression. Our objective in this review was to assess machine learning alternatives to logistic regression, which may accomplish the same goals but with fewer assumptions or greater accuracy. We identified alternative methods for propensity score estimation and/or classification from the public health, biostatistics, discrete mathematics, and computer science literature, and evaluated these algorithms for applicability to the problem of propensity score estimation, potential advantages over logistic regression, and ease of use. We identified four techniques as alternatives to logistic regression: neural networks, support vector machines, decision trees (classification and regression trees [CART]), and meta-classifiers (in particular, boosting). Although the assumptions of logistic regression are well understood, those assumptions are frequently ignored. All four alternatives have advantages and disadvantages compared with logistic regression. Boosting (meta-classifiers) and, to a lesser extent, decision trees (particularly CART), appear to be most promising for use in the context of propensity score analysis, but extensive simulation studies are needed to establish their utility in practice. Copyright (c) 2010 Elsevier Inc. All rights reserved.

Integrated Computer System of Management in Logistics

NASA Astrophysics Data System (ADS)

Chwesiuk, Krzysztof

2011-06-01

This paper aims at presenting a concept of an integrated computer system of management in logistics, particularly in supply and distribution chains. Consequently, the paper includes the basic idea of the concept of computer-based management in logistics and components of the system, such as CAM and CIM systems in production processes, and management systems for storage, materials flow, and for managing transport, forwarding and logistics companies. The platform which integrates computer-aided management systems is that of electronic data interchange.

Summary of Resources for the International Space Station Environmental Control and Life Support System For Core Complete Modules

NASA Technical Reports Server (NTRS)

Williams, David E.

2004-01-01

The Core Complete Environmental Control and Life Support (ECLS) System for the International Space Station (ISS) will consist of components and subsystems in both the United States (U.S.) and International Partner elements which together will perform the functions of Temperature and Humidity Control (THC), Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Water Recovery and Management (WRM), Fire Detection and Suppression (FDS), and Vacuum System (VS) for the station. Due to limited resources available on ISS, detailed attention is given to minimizing and tracking all resources associated with all systems, beginning with estimates during the hardware development phase through measured actuals when flight hardware is built and delivered. A summary of resources consumed by the addition of future U.S. ECLS system hardware to get to Core Complete is presented, including launch weight, average continuous and peak power loads, on-orbit volume and resupply logistics.

Issues and Experiences in Logistics Collaboration

NASA Astrophysics Data System (ADS)

Lehoux, Nadia; Audy, Jean-François; D‘Amours, Sophie; Rönnqvist, Mikael

Collaborative logistics is becoming more important in today’s industry. This is driven by increased environmental concerns, improved efficiency through collaborative planning supporting resources sharing and new business models implementation. This paper explores collaborative logistics and reports on business applications within the forest products industry in Sweden and Canada. It first describes current opportunities in collaborative planning. It then discusses issues related to building the coalition as well as sharing resources and benefits. Three business cases are described and used to support the discussion around these main issues. Finally, different challenges are detailed, opening new paths for researchers in the field.

Logistics in a low carbon concept: Connotation and realization way

NASA Astrophysics Data System (ADS)

Zheng, Chaocheng; Qiu, Xiaoying; Mao, Jiarong

2017-01-01

Low-carbon logistics has become a trend for the logistics industry-as a high-energy consumption industry, continuation of its previous operating mode has been significantly behind the times. So logistics industry must release lower carbon emissions. This paper sort out the literature home and abroad from three aspects, that is, the definition of low-carbon logistics, low-carbon logistics implementation mechanisms or measures, and low carbon design quantitative models. The research shows: low-carbon logistics needed to implemented both in enterprise' macro and micro level, which means the government should provide relevant policy support and micro enterprises should be actively sought from all sectors of the logistics in energy saving. In practice, low-carbon logistics optimization models are effective tools for enterprises to implement emission reduction.

The NASA CELSS program

NASA Technical Reports Server (NTRS)

Averner, Maurice M.

1990-01-01

The NASA Controlled Ecological Life Support System (CELSS) program was initiated with the premise that NASA's goal would eventually include extended duration missions with sizable crews requiring capabilities beyond the ability of conventional life support technology. Currently, as mission duration and crew size increase, the mass and volume required for consumable life support supplies also increase linearly. Under these circumstances the logistics arrangements and associated costs for life support resupply will adversely affect the ability of NASA to conduct long duration missions. A solution to the problem is to develop technology for the recycling of life support supplies from wastes. The CELSS concept is based upon the integration of biological and physico-chemical processes to construct a system which will produce food, potable water, and a breathable atmosphere from metabolic and other wastes, in a stable and reliable manner. A central feature of a CELSS is the use of green plant photosynthesis to produce food, with the resulting production of oxygen and potable water, and the removal of carbon dioxide.

Use of Patient-Reported Outcome (PRO) Measures at Group and Patient Levels: Experiences From the Generic Integrated PRO System, WestChronic

PubMed Central

Larsen, Louise Pape; Biering, Karin; Johnsen, Soren Paaske; Riiskjær, Erik; Schougaard, Liv Marit

2014-01-01

Background Patient-reported outcome (PRO) measures may be used at a group level for research and quality improvement and at the individual patient level to support clinical decision making and ensure efficient use of resources. The challenges involved in implementing PRO measures are mostly the same regardless of aims and diagnostic groups and include logistic feasibility, high response rates, robustness, and ability to adapt to the needs of patient groups and settings. If generic PRO systems can adapt to specific needs, advanced technology can be shared between medical specialties and for different aims. Objective We describe methodological, organizational, and practical experiences with a generic PRO system, WestChronic, which is in use among a range of diagnostic groups and for a range of purposes. Methods The WestChronic system supports PRO data collection, with integration of Web and paper PRO questionnaires (mixed-mode) and automated procedures that enable adherence to implementation-specific schedules for the collection of PRO. For analysis, we divided functionalities into four elements: basic PRO data collection and logistics, PRO-based clinical decision support, PRO-based automated decision algorithms, and other forms of communication. While the first element is ubiquitous, the others are optional and only applicable at a patient level. Methodological and organizational experiences were described according to each element. Results WestChronic has, to date, been implemented in 22 PRO projects within 18 diagnostic groups, including cardiology, neurology, rheumatology, nephrology, orthopedic surgery, gynecology, oncology, and psychiatry. The aims of the individual projects included epidemiological research, quality improvement, hospital evaluation, clinical decision support, efficient use of outpatient clinic resources, and screening for side effects and comorbidity. In total 30,174 patients have been included, and 59,232 PRO assessments have been collected using 92 different PRO questionnaires. Response rates of up to 93% were achieved for first-round questionnaires and up to 99% during follow-up. For 6 diagnostic groups, PRO data were displayed graphically to the clinician to facilitate flagging of important symptoms and decision support, and in 5 diagnostic groups PRO data were used for automatic algorithm-based decisions. Conclusions WestChronic has allowed the implementation of all proposed protocol for data collection and processing. The system has achieved high response rates, and longitudinal attrition is limited. The relevance of the questions, the mixed-mode principle, and automated procedures has contributed to the high response rates. Furthermore, development and implementation of a number of approaches and methods for clinical use of PRO has been possible without challenging the generic property. Generic multipurpose PRO systems may enable sharing of automated and efficient logistics, optimal response rates, and other advanced options for PRO data collection and processing, while still allowing adaptation to specific aims and patient groups. PMID:24518281

When Disaster Strikes Is Logistics and Contracting Support Ready?

DTIC Science & Technology

2011-09-27

improve response in the event of an actual crisis . The Defense Contingency Contracting Handbook (Christianson, A., Coombs , J., Harbin, S., Ingram...AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT Recent crisis responses, including the...and management of the DoD?s logistics and contracting support for contingency, expeditionary, and crisis response, and provide specific recommendations

Regional Alignment: Phase Zero Logistics Implications

DTIC Science & Technology

2014-05-01

Brigade TDC Theater Distribution Center TPFDL Time Phased Force Deployment List TSC Theater Sustainment Command v INTRODUCTION Not only are...Center ( TDC ) capability in response to the backlog of supplies and equipment required during major combat operation. The TDC was a contracted...organization, constructed to support units based on amount personnel and equipment. This TDC concept was a part of the logistics concept that supported

REECo activities and sample logistics in support of the Nevada Applied Ecology Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wireman, D.L.; Rosenberry, C.E. Jr.; White, M.G.

Activities and sample logistics of Reynolds Electrical and Engineering Co., Inc. (REECo), in support of the Nevada Applied Ecology Group (NAEG), are discussed in this summary report. Activities include the collection, preparation, and shipment of samples of soils, vegetation, and small animals collected at Pu-contaminated areas of the Nevada Test Site and Tonopah Test Range. (CH)

TQM (Total Quality Management) SPARC (Special Process Action Review Committees) Handbook

DTIC Science & Technology

1989-08-01

This document describes the techniques used to support and guide the Special Process Action Review Committees for accomplishing their goals for Total Quality Management (TQM). It includes concepts and definitions, checklists, sample formats, and assessment criteria. Keywords: Continuous process improvement; Logistics information; Process analysis; Quality control; Quality assurance; Total Quality Management ; Statistical processes; Management Planning and control; Management training; Management information systems.

Defense Logistics: DOD Has Addressed Most Reporting Requirements and Continues to Refine Its Asset Visibility Strategy

DTIC Science & Technology

2015-12-01

Development, Test, and Evaluation RFID Radio Frequency Identification SEP Supporting Execution Plan Strategy Strategy to Improve Asset...migration of active Radio Frequency Identification ( RFID )19 from a proprietary communication standard protocol to an international standard to...technologies enabling hands-off processing of materiel deploying through the Defense Transportation System. Materiel marked with RFID tags may be remotely

Cost-Based Analysis of Unmanned Aerial Vehicles/Unmanned Aerial Systems in Filling the Role of Logistical Support

DTIC Science & Technology

2014-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release, distribution is unlimited COST-BASED... Thesis Advisor: Simona Tick Co-Advisor: Douglas Brinkley THIS PAGE INTENTIONALLY LEFT BLANK REPORT...USE ONLY (Leave blonk) I 2. REPORT DATE I 3. REPORT TYPE AND DATES COVERED December 2014 Master’s Thesis 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS

Investigating the Department of Defense’s Implementation of Passive Radio Frequency Identification (RFID)

DTIC Science & Technology

2005-12-01

Logistics Support Activity MIT Massachusetts Institution of Technology MRE Meals -Ready-to-Eat MRO Material Release Order MSC Military Sealift... increase once item tagging becomes mandated. Reader, middleware, specialized hardware, and physical infrastructure costs can add up too. Reader’s...that system integration revenues could surpass hardware by 2007 (Asif & Mandviwalla, 2005, p. 26). (4) Training. Training is another challenge

Carbon Dioxide Control System for a Mars Space Suit Life Support System

NASA Technical Reports Server (NTRS)

Alptekin, Gokhan; Jayaraman, Ambalavanan; Copeland, Robert; Parker, Amanda; Paul, Heather L.

2011-01-01

Carbon dioxide (CO2) control during Extravehicular Activities (EVAs) on Mars will be challenging. Lithium hydroxide (LiOH) canisters have impractical logistics penalties, and regenerable metal oxide (MetOx) canisters weigh too much. Cycling bed systems and permeable membranes that are regenerable in space vacuum cannot vent on Mars due to the high partial pressure of CO2 in the atmosphere. Although sweep gas regeneration is under investigation, the feasibility, logistics penalties, and failure modes associated with this technique have not been fully determined. TDA Research, Inc. is developing a durable, high-capacity regenerable adsorbent that can remove CO2 from the space suit ventilation loop. The system design allows sorbent regeneration at or above 6 torr, eliminating the potential for Martian atmosphere to leak into the regeneration bed and into the ventilation loop. Regeneration during EVA minimizes the amount of consumables to be brought from Earth and makes the mission more affordable, while providing great operational flexibility during EVA. The feasibility of the concept has been demonstrated in a series of bench-scale experiments and a preliminary system analysis. This paper presents the latest results from these sorbent and system development efforts.

Aviation Logistics Support in the United States Coast Guard: An Assessment of Management and Cost-Effectiveness

DTIC Science & Technology

1993-01-01

34 with air stations, with DoD support sources, with AR&SC, with other USCG Headquarters elements, with commercial vendors, and with research and...STRATEGY FOR THE FUTURE Based on our research , knowledge of other aviation logistics support programs, and analysis of the USCG’s program, we believe that...concerted effort to develop and refine the maintenance and supply data the model uses. That effort should include ditermining the basic Ao requirement and

75 FR 17910 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-08

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

75 FR 15694 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

75 FR 52515 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing.... Jody Sinkler at (703) 767-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of...

75 FR 19377 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

75 FR 20580 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency proposes to amend a system of records notice in its existing.... SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the Privacy Act of...

75 FR 10473 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency proposes to amend a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

Aviation System Analysis Capability (ASAC) Quick Response System (QRS) Test Report

NASA Technical Reports Server (NTRS)

Roberts, Eileen; Villani, James A.; Ritter, Paul

1997-01-01

This document is the Aviation System Analysis Capability (ASAC) Quick Response System (QRS) Test Report. The purpose of this document is to present the results of the QRS unit and system tests in support of the ASAC QRS development effort. This document contains an overview of the project background and scope, defines the QRS system and presents the additions made to the QRS this year, explains the assumptions, constraints, and approach used to conduct QRS Unit and System Testing, and presents the schedule used to perform QRS Testing. The document also presents an overview of the Logistics Management Institute (LMI) Test Facility and testing environment and summarizes the QRS Unit and System Test effort and results.

Mars outpost - System and operations challenges

NASA Technical Reports Server (NTRS)

Roberts, Barney; Guerra, Lisa

1990-01-01

The paper addresses the challenges inherent in establishing an outpost on the planet Mars. For background purposes, the unique, remote Martian environment and the developmental phases of a settlement in such an environment are discussed. Challenges are identified in terms of surface systems and operations. Due to its importance to habitability, the life support system (LSS) is highlighted with various options identified. Operations for the Mars outpost, earth-based and local, are characterized by a decentralized concept. The challenge of integrating logistics analysis early in system design and operations strategy is also addressed. In order to understand and reduce the system and operations challenges, the application of terrestrial and lunar testbeds is explained.

Space Shuttle operational logistics plan

NASA Technical Reports Server (NTRS)

Botts, J. W.

1983-01-01

The Kennedy Space Center plan for logistics to support Space Shuttle Operations and to establish the related policies, requirements, and responsibilities are described. The Directorate of Shuttle Management and Operations logistics responsibilities required by the Kennedy Organizational Manual, and the self-sufficiency contracting concept are implemented. The Space Shuttle Program Level 1 and Level 2 logistics policies and requirements applicable to KSC that are presented in HQ NASA and Johnson Space Center directives are also implemented.

Defense Logistics Agency FY 1998 Property, Plant, and Equipment Financial Reporting

DTIC Science & Technology

1999-04-26

0it ort DEFENSE LOGISTICS AGENCY FY 1998 PROPERTY, PLANT, AND EQUIPMENT FINANCIAL REPORTING Report No. 99-142 April 26, 1999 Office of the Inspector...LOGISTICS AGENCY SUBJECT: Audit Report on Defense Logistics Agency FY 1998 Property, Plant, and Equipment Financial Reporting (Report No. 99-142) We...Property, Plant, and Equipment Financial Reporting Executive Summary Introduction. The audit was performed in support of our work to meet the requirements of

Sustainment and Logistics in Better Buying Power

DTIC Science & Technology

2015-07-01

for Logistics and Materiel Readiness. He is responsible for ensuring logistics support to the United States Armed Forces. From the first issuance of...Milestone B, based on a per unit annual cost, but since DoD has been tracking and reporting such costs under BBP for only a few years, a relatively small...it’s also because logistics activities need to interoperate with commercial suppliers both within the United States and across the global commercial

KSC-06pd0924

NASA Image and Video Library

2006-05-23

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout room on the rotating service structure on Launch Pad 39B, the multi-purpose logistics module Leonardo is being moved into Space Shuttle Discovery's payload bay. The payload ground-handling mechanism (PGHM) is used to transfer the module into the payload bay. Leonardo is a reusable logistics carrier. It is the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Leonardo is part of the payload on mission STS-121. Other payloads include the integrated cargo carrier with the mobile transporter reel assembly and a spare pump module, and the lightweight multi-purpose experiment support structure carrier. Discovery is scheduled to launch in a window extending from July 1 through July 19. Photo credit: NASA/Jack Pfaller

KSC-06pd0927

NASA Image and Video Library

2006-05-23

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout room on the rotating service structure on Launch Pad 39B, the multi-purpose logistics module Leonardo is lowered into Space Shuttle Discovery's payload bay. The payload ground-handling mechanism (PGHM) is used to transfer the module into the payload bay. Leonardo is a reusable logistics carrier. It is the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Leonardo is part of the payload on mission STS-121. Other payloads include the integrated cargo carrier with the mobile transporter reel assembly and a spare pump module, and the lightweight multi-purpose experiment support structure carrier. Discovery is scheduled to launch in a window extending from July 1 through July 19. Photo credit: NASA/Jack Pfaller

Raffaello is offloaded from a Beluga super transporter

NASA Technical Reports Server (NTRS)

1999-01-01

At the Shuttle Landing Facility, the one-piece, upward-hinged main cargo door of the Airbus Industrie A300-600ST 'Beluga' Super Transporter is open to offload its cargo, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM, named Raffaello, is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

Perception of tourists regarding the smoke-free policy at Suvarnabhumi International Airport, Bangkok, Thailand.

PubMed

Sirichotiratana, Nithat; Yogi, Subash; Prutipinyo, Chardsumon

2013-08-30

This study was conducted during February-March 2012 to determine the perception and support regarding smoke-free policy among tourists at Suvarnabhumi International Airport, Bangkok, Thailand. In this cross-sectional study, 200 tourists (n = 200) were enrolled by convenience sampling and interviewed by structured questionnaire. Descriptive statistics, chi-square, and multinomial logistic regression were adopted in the study. Results revealed that half (50%) of the tourists were current smokers and 55% had visited Thailand twice or more. Three quarter (76%) of tourists indicated that they would visit Thailand again even if it had a 100% smoke-free regulation. Almost all (99%) of the tourists had supported for the smoke-free policy (partial ban and total ban), and current smokers had higher percentage of support than non-smokers. Two factors, current smoking status and knowledge level, were significantly associated with perception level. After analysis with Multinomial Logistic Regression, it was found that perception, country group, and presence of designated smoking room (DSR) were associated with smoke-free policy. Recommendation is that, at institution level effective monitoring system is needed at the airport. At policy level, the recommendation is that effective comprehensive policy needed to be emphasized to ensure smoke-free airport environment.

In-space propellant logistics. Volume 4: Project planning data

NASA Technical Reports Server (NTRS)

1972-01-01

The prephase A conceptual project planning data as it pertains to the development of the selected logistics module configuration transported into earth orbit by the space shuttle orbiter. The data represents the test, implementation, and supporting research and technology requirements for attaining the propellant transfer operational capability for early 1985. The plan is based on a propellant module designed to support the space-based tug with cryogenic oxygen-hydrogen propellants. A logical sequence of activities that is required to define, design, develop, fabricate, test, launch, and flight test the propellant logistics module is described. Included are the facility and ground support equipment requirements. The schedule of activities are based on the evolution and relationship between the R and T, the development issues, and the resultant test program.

Closed-loop supply chain models with considering the environmental impact.

PubMed

Mohajeri, Amir; Fallah, Mohammad

2014-01-01

Global warming and climate changes created by large scale emissions of greenhouse gases are a worldwide concern. Due to this, the issue of green supply chain management has received more attention in the last decade. In this study, a closed-loop logistic concept which serves the purposes of recycling, reuse, and recovery required in a green supply chain is applied to integrate the environmental issues into a traditional logistic system. Here, we formulate a comprehensive closed-loop model for the logistics planning considering profitability and ecological goals. In this way, we can achieve the ecological goal reducing the overall amount of CO2 emitted from journeys. Moreover, the profitability criterion can be supported in the cyclic network with the minimum costs and maximum service level. We apply three scenarios and develop problem formulations for each scenario corresponding to the specified regulations and investigate the effect of the regulation on the preferred transport mode and the emissions. To validate the models, some numerical experiments are worked out and a comparative analysis is investigated.

An ultra low power feature extraction and classification system for wearable seizure detection.

PubMed

Page, Adam; Pramod Tim Oates, Siddharth; Mohsenin, Tinoosh

2015-01-01

In this paper we explore the use of a variety of machine learning algorithms for designing a reliable and low-power, multi-channel EEG feature extractor and classifier for predicting seizures from electroencephalographic data (scalp EEG). Different machine learning classifiers including k-nearest neighbor, support vector machines, naïve Bayes, logistic regression, and neural networks are explored with the goal of maximizing detection accuracy while minimizing power, area, and latency. The input to each machine learning classifier is a 198 feature vector containing 9 features for each of the 22 EEG channels obtained over 1-second windows. All classifiers were able to obtain F1 scores over 80% and onset sensitivity of 100% when tested on 10 patients. Among five different classifiers that were explored, logistic regression (LR) proved to have minimum hardware complexity while providing average F-1 score of 91%. Both ASIC and FPGA implementations of logistic regression are presented and show the smallest area, power consumption, and the lowest latency when compared to the previous work.

Research on simulation based material delivery system for an automobile company with multi logistics center

NASA Astrophysics Data System (ADS)

Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

2017-06-01

Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

LOGISTIC MANAGEMENT INFORMATION SYSTEM - MANUAL DATA STORAGE AND RETRIEVAL SYSTEM.

DTIC Science & Technology

Logistics Management Information System . The procedures are applicable to manual storage and retrieval of all data used in the Logistics Management ... Information System (LMIS) and include the following: (1) Action Officer data source file. (2) Action Officer presentation format file. (3) LMI Coordination

Third International Symposium on Space Mission Operations and Ground Data Systems, part 1

NASA Technical Reports Server (NTRS)

Rash, James L. (Editor)

1994-01-01

Under the theme of 'Opportunities in Ground Data Systems for High Efficiency Operations of Space Missions,' the SpaceOps '94 symposium included presentations of more than 150 technical papers spanning five topic areas: Mission Management, Operations, Data Management, System Development, and Systems Engineering. The papers focus on improvements in the efficiency, effectiveness, productivity, and quality of data acquisition, ground systems, and mission operations. New technology, techniques, methods, and human systems are discussed. Accomplishments are also reported in the application of information systems to improve data retrieval, reporting, and archiving; the management of human factors; the use of telescience and teleoperations; and the design and implementation of logistics support for mission operations.

Space Shuttle Orbiter logistics - Managing in a dynamic environment

NASA Technical Reports Server (NTRS)

Renfroe, Michael B.; Bradshaw, Kimberly

1990-01-01

The importance and methods of monitoring logistics vital signs, logistics data sources and acquisition, and converting data into useful management information are presented. With the launch and landing site for the Shuttle Orbiter project at the Kennedy Space Center now totally responsible for its own supportability posture, it is imperative that logistics resource requirements and management be continually monitored and reassessed. Detailed graphs and data concerning various aspects of logistics activities including objectives, inventory operating levels, customer environment, and data sources are provided. Finally, some lessons learned from the Shuttle Orbiter project and logistics options which should be considered by other space programs are discussed.

Providing Logistics Support to CDC-Deployed Staff for the Ebola Response in Liberia, Guinea, and Sierra Leone.

PubMed

Dopson, Stephanie A; Rodriguez, Rockie; Rouse, Edward N

2015-11-01

The first Ebola cases in West Africa were reported by the Guinea Ministry of Health on March 23, 2014, and by June it became the largest recorded Ebola outbreak. Centers for Disease Control and Prevention field teams were deployed to West Africa, including in-country logistics staff who were critical for ensuring the movement of staff, equipment, and supplies to locations where public health knowledge and experience were applied to meet mission-related requirements. The logistics role was critical to creating the support for epidemiologists, medical doctors, laboratory staff, and health communicators involved in health promotion activities to successfully respond to the epidemic, both in the capital cities and in remote villages. Logistics personnel worked to procure equipment, such as portable video projectors, and have health promotion materials printed. Logistics staff also coordinated delivery of communication and health promotion materials to the embassy and provided assistance with distribution to various partners. © 2015 Society for Public Health Education.

Introduction to the enhanced logistics intratheater support tool (ELIST) mission application and its segments : global data segment version 8.1.0.0, database instance segment version 8.1.0.0, database fill segment version 8.1.0.0, database segment versio

DOT National Transportation Integrated Search

2002-02-26

This document, the Introduction to the Enhanced Logistics Intratheater Support Tool (ELIST) Mission Application and its Segments, satisfies the following objectives: : It identifies the mission application, known in brief as ELIST, and all seven ...

Inspiring health worker motivation with supportive supervision: a survey of lady health supervisor motivating factors in rural Pakistan.

PubMed

Rabbani, Fauziah; Shipton, Leah; Aftab, Wafa; Sangrasi, Kashif; Perveen, Shagufta; Zahidie, Aysha

2016-08-17

Community health worker motivation is an important consideration for improving performance and addressing maternal, newborn, and child health in low and middle-income countries. Therefore, identifying health system interventions that address motivating factors in resource-strained settings is essential. This study is part of a larger implementation research project called Nigraan, which is intervening on supportive supervision in the Lady Health Worker Programme to improve community case management of pneumonia and diarrhea in rural Pakistan. This study explored the motivation of Lady Health Supervisors, a cadre of community health workers, with particular attention to their views on supportive supervision. Twenty-nine lady health supervisors enrolled in Nigraan completed open-ended structured surveys with questions exploring factors that affect their motivation. Thematic analysis was conducted using a conceptual framework categorizing motivating factors at individual, community, and health system levels. Supportive supervision, recognition, training, logistics, and salaries are community and health system motivating factors for lady health supervisors. Lady health supervisors are motivated by both their role in providing supportive supervision to lady health workers and by the supervisory support received from their coordinators and managers. Family support, autonomy, and altruism are individual level motivating factors. Health system factors, including supportive supervision, are crucial to improving lady health supervisor motivation. As health worker motivation influences their performance, evaluating the impact of health system interventions on community health worker motivation is important to improving the effectiveness of community health worker programs.

Front-End Analysis Cornerstone of Logistics

NASA Technical Reports Server (NTRS)

Nager, Paul J.

2000-01-01

The presentation provides an overview of Front-End Logistics Support Analysis (FELSA), when it should be performed, benefits of performing FELSA and why it should be performed, how it is conducted, and examples.

An Interactive Logistics Centre Information Integration System Using Virtual Reality

NASA Astrophysics Data System (ADS)

Hong, S.; Mao, B.

2018-04-01

The logistics industry plays a very important role in the operation of modern cities. Meanwhile, the development of logistics industry has derived various problems that are urgent to be solved, such as the safety of logistics products. This paper combines the study of logistics industry traceability and logistics centre environment safety supervision with virtual reality technology, creates an interactive logistics centre information integration system. The proposed system utilizes the immerse characteristic of virtual reality, to simulate the real logistics centre scene distinctly, which can make operation staff conduct safety supervision training at any time without regional restrictions. On the one hand, a large number of sensor data can be used to simulate a variety of disaster emergency situations. On the other hand, collecting personnel operation data, to analyse the improper operation, which can improve the training efficiency greatly.

Summary Report on the Audit of Defense Logistics Agency 1995 Defense Base Realignment and Closure Data Collection Process.

DTIC Science & Technology

1995-06-19

VXW-ÄVAVKVX’AWXW/XVXV:*: OFFICE OF THE INSPECTOR GENERAL SUMMARY REPORT ON THE AUDIT OF DEFENSE LOGISTICS AGENCY 1995 DEFENSE BASE REALIGNMENT...FOR DIRECTOR, DEFENSE LOGISTICS AGENCY SUBJECT: Summary Report on the Audit of Defense Logistics Agency 1995 Defense Base Realignment and Closure...the data that DLA provides to support recommendations for the 1995 Commission. The specific objective for the audits was to determine whether the

Analysis of Advanced Modular Power Systems (AMPS) for Deep Space Exploration

NASA Technical Reports Server (NTRS)

Oeftering, Richard; Soeder, James F.; Beach, Ray

2014-01-01

The Advanced Modular Power Systems (AMPS) project is developing a modular approach to spacecraft power systems for exploration beyond Earth orbit. AMPS is intended to meet the need of reducing the cost of design development, test and integration and also reducing the operational logistics cost of supporting exploration missions. AMPS seeks to establish modular power building blocks with standardized electrical, mechanical, thermal and data interfaces that can be applied across multiple exploration vehicles. The presentation discusses the results of a cost analysis that compares the cost of the modular approach against a traditional non-modular approach.

76 FR 24000 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to add a system of records. SUMMARY: The Defense Logistics Agency proposes to add a system of records notice to its existing inventory... Act Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443...

76 FR 73602 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

...; System of Records AGENCY: Defense Logistics Agency, Department of Defense (DoD). ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records...: Ms. Jody Sinkler, DLA FOIA/Privacy Act Office, Headquarters, Defense Logistics Agency, ATTN: DGA...

76 FR 20339 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Alter a System of Records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing... Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443, Fort...

77 FR 26261 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

...; System of Records AGENCY: Office of the Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records in its.../Privacy Act Office, Headquarters, Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite...

76 FR 20341 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing... Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443, Fort...

76 FR 12078 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

...; Systems of Records AGENCY: Defense Logistics Agency. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing inventory of... Act Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443...

76 FR 13991 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-15

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing...-5045, or the Privacy Act Officer, Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J...

76 FR 28002 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete three systems of records. SUMMARY: The Defense Logistics Agency proposes to delete three systems of records notices in its..., Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 12076 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing...-5045, or Privacy Act Officer, Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman...

Comparing machine learning and logistic regression methods for predicting hypertension using a combination of gene expression and next-generation sequencing data.

PubMed

Held, Elizabeth; Cape, Joshua; Tintle, Nathan

2016-01-01

Machine learning methods continue to show promise in the analysis of data from genetic association studies because of the high number of variables relative to the number of observations. However, few best practices exist for the application of these methods. We extend a recently proposed supervised machine learning approach for predicting disease risk by genotypes to be able to incorporate gene expression data and rare variants. We then apply 2 different versions of the approach (radial and linear support vector machines) to simulated data from Genetic Analysis Workshop 19 and compare performance to logistic regression. Method performance was not radically different across the 3 methods, although the linear support vector machine tended to show small gains in predictive ability relative to a radial support vector machine and logistic regression. Importantly, as the number of genes in the models was increased, even when those genes contained causal rare variants, model predictive ability showed a statistically significant decrease in performance for both the radial support vector machine and logistic regression. The linear support vector machine showed more robust performance to the inclusion of additional genes. Further work is needed to evaluate machine learning approaches on larger samples and to evaluate the relative improvement in model prediction from the incorporation of gene expression data.

Information logistics: A production-line approach to information services

NASA Technical Reports Server (NTRS)

Adams, Dennis; Lee, Chee-Seng

1991-01-01

Logistics can be defined as the process of strategically managing the acquisition, movement, and storage of materials, parts, and finished inventory (and the related information flow) through the organization and its marketing channels in a cost effective manner. It is concerned with delivering the right product to the right customer in the right place at the right time. The logistics function is composed of inventory management, facilities management, communications unitization, transportation, materials management, and production scheduling. The relationship between logistics and information systems is clear. Systems such as Electronic Data Interchange (EDI), Point of Sale (POS) systems, and Just in Time (JIT) inventory management systems are important elements in the management of product development and delivery. With improved access to market demand figures, logisticians can decrease inventory sizes and better service customer demand. However, without accurate, timely information, little, if any, of this would be feasible in today's global markets. Information systems specialists can learn from logisticians. In a manner similar to logistics management, information logistics is concerned with the delivery of the right data, to the ring customer, at the right time. As such, information systems are integral components of the information logistics system charged with providing customers with accurate, timely, cost-effective, and useful information. Information logistics is a management style and is composed of elements similar to those associated with the traditional logistics activity: inventory management (data resource management), facilities management (distributed, centralized and decentralized information systems), communications (participative design and joint application development methodologies), unitization (input/output system design, i.e., packaging or formatting of the information), transportations (voice, data, image, and video communication systems), materials management (data acquisition, e.g., EDI, POS, external data bases, data entry) and production scheduling (job, staff, and project scheduling).

Design and logistics of integrated spacecraft/lander lunar habitat concepts

NASA Technical Reports Server (NTRS)

Hypes, Warren D.; Wright, Robert L.; Gould, Marston J.; Lovelace, U. M.

1991-01-01

Integrated spacecraft/lander combinations have been designed to provide a support structure for thermal and galactic radiation shielding for three initial lunar habitat concepts. Integrating the support structure with the habitat reduces the logistics requirements for the implantation of the initial base. The designs are simple, make use of existing technologies, and minimize the amount of lunar surface preparation and crew activity. The design facilitates continued use of all elements in the development of a permanent lunar base and precludes the need for an entirely different structure of larger volume and increased complexity of implantation. This design philosophy, coupled with the reduced logistics, increases overall cost effectiveness.

Experiment module concepts study. Volume 2: Experiments and mission operations

NASA Technical Reports Server (NTRS)

Macdonald, J. M.

1970-01-01

The baseline experiment program is concerned with future space experiments and cover the scientific disciplines of astronomy, space physics, space biology, biomedicine and biotechnology, earth applications, materials science, and advanced technology. The experiments within each discipline are grouped into functional program elements according to experiments that support a particular area of research or investigation and experiments that impose similar or related demand on space station support systems. The experiment requirements on module subsystems, experiment operating modes and time profiles, and the role of the astronaut are discussed. Launch and rendezvous with the space station, disposal, and on-orbit operations are delineated. The operational interfaces between module and other system elements are presented and include space station and logistic system interfaces. Preliminary launch and on-orbit environmental criteria and requirements are discussed, and experiment equipment weights by functional program elements are tabulated.

Competition in Weapon Systems Acquisition: Cost Analyses of Some Issues

DTIC Science & Technology

1990-09-01

10% increments , also known as the step-ladder bids) submitted by the contractor in the first year of dual source procurement. The triangles represent...savings by subtracting annual incremental government costs, stated in constant dollars, from (3). (5) Estimate nonrecurring start-up costs, stated in...constant dollars, by fiscal year. (6) Estimate incremental logistic support costs, stated in constant dollars. by fiscal year. (7) Calculate a net

Naval Supply Systems Command Fleet Logistics Center

DTIC Science & Technology

2012-08-08

Partial small business set - aside is a potential consideration   12-month Base plus two options   Synopsis N00604-11-R-3006 on NECO and FedBizOpps...2012 Navy Gold Coast Small Business Procurement Event 8 August 2012 #1 PRIORITY = Operating Forces Support …while ensuring Joint...while ensuring Joint Base Success FedBid.com Reverse Auction Website 8 Small Business Assistance #1 PRIORITY = Operating Forces

Using Cost as an Independent Variable (CAIV) to Reduce Total Ownership Cost

DTIC Science & Technology

2006-01-31

and the online Guidebook’s best practices provide policy and process guidance for preparation of user-required capabilities (CJCS 3170 series ), along...of new JROC/JCIDS processes nor engendering full leadership support to reduce O&S costs. The Program Manager (PM) is responsible for developing and...warfighting systems? The Under Secretary of Defense for Acquisition, Technology and Logistics (USD (AT&L)) published new acquisition policy and

Defense AT and L, Volume 42, Number 4, July-August 2013

DTIC Science & Technology

2013-07-01

to Controlling Costs Steven Hurt and Alan Heckler DoD design of support concepts for all weapon systems must be structurally...Manager, is published bimonthly by the DAU Press and is free to all U.S. and foreign national subscribers. Periodical postage is paid at the U.S...works in defense acqui- sition, technology, and logistics for all the hard work, dedication, professionalism, and, increasingly, the patience and

LogLines. May-June 2009

DTIC Science & Technology

2009-06-01

management of a former Navy- owned warehouse in Bahrain. “Today when folks in Bahrain requisition material from Kuwait, we y Army Staff Sgt. Thomas ...members who staff each section who provide the key in- gredient for sustaining world-class war ghter support. Navy Capt . Michelle Skubic, director...weapon systems. 23Loglines May - June 2009 Roberto Arenas and Ron Gay , tools and parts attendants at Defense Logistics Agency Cherry Point, N.C

Understanding latent structures of clinical information logistics: A bottom-up approach for model building and validating the workflow composite score.

PubMed

Esdar, Moritz; Hübner, Ursula; Liebe, Jan-David; Hüsers, Jens; Thye, Johannes

2017-01-01

Clinical information logistics is a construct that aims to describe and explain various phenomena of information provision to drive clinical processes. It can be measured by the workflow composite score, an aggregated indicator of the degree of IT support in clinical processes. This study primarily aimed to investigate the yet unknown empirical patterns constituting this construct. The second goal was to derive a data-driven weighting scheme for the constituents of the workflow composite score and to contrast this scheme with a literature based, top-down procedure. This approach should finally test the validity and robustness of the workflow composite score. Based on secondary data from 183 German hospitals, a tiered factor analytic approach (confirmatory and subsequent exploratory factor analysis) was pursued. A weighting scheme, which was based on factor loadings obtained in the analyses, was put into practice. We were able to identify five statistically significant factors of clinical information logistics that accounted for 63% of the overall variance. These factors were "flow of data and information", "mobility", "clinical decision support and patient safety", "electronic patient record" and "integration and distribution". The system of weights derived from the factor loadings resulted in values for the workflow composite score that differed only slightly from the score values that had been previously published based on a top-down approach. Our findings give insight into the internal composition of clinical information logistics both in terms of factors and weights. They also allowed us to propose a coherent model of clinical information logistics from a technical perspective that joins empirical findings with theoretical knowledge. Despite the new scheme of weights applied to the calculation of the workflow composite score, the score behaved robustly, which is yet another hint of its validity and therefore its usefulness. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for Sole-Source Commercial Spare Parts (REDACTED)

DTIC Science & Technology

2015-05-08

Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for Sole-Source Commercial Spare Parts...Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for Sole-Source Commercial Spare Parts...D000AH-0180.000) │ i Results in Brief Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for

Space Station Freedom - Configuration management approach to supporting concurrent engineering and total quality management. [for NASA Space Station Freedom Program

NASA Technical Reports Server (NTRS)

Gavert, Raymond B.

1990-01-01

Some experiences of NASA configuration management in providing concurrent engineering support to the Space Station Freedom program for the achievement of life cycle benefits and total quality are discussed. Three change decision experiences involving tracing requirements and automated information systems of the electrical power system are described. The potential benefits of concurrent engineering and total quality management include improved operational effectiveness, reduced logistics and support requirements, prevention of schedule slippages, and life cycle cost savings. It is shown how configuration management can influence the benefits attained through disciplined approaches and innovations that compel consideration of all the technical elements of engineering and quality factors that apply to the program development, transition to operations and in operations. Configuration management experiences involving the Space Station program's tiered management structure, the work package contractors, international partners, and the participating NASA centers are discussed.

Optical Fiber Assemblies for Space Flight from the NASA Goddard Space Flight Center, Photonics Group

NASA Technical Reports Server (NTRS)

Ott, Melanie N.; Thoma, William Joe; LaRocca, Frank; Chuska, Richard; Switzer, Robert; Day, Lance

2009-01-01

The Photonics Group at NASA Goddard Space Flight Center in the Electrical Engineering Division of the Advanced Engineering and Technologies Directorate has been involved in the design, development, characterization, qualification, manufacturing, integration and anomaly analysis of optical fiber subsystems for over a decade. The group supports a variety of instrumentation across NASA and outside entities that build flight systems. Among the projects currently supported are: The Lunar Reconnaissance Orbiter, the Mars Science Laboratory, the James Webb Space Telescope, the Express Logistics Carrier for the International Space Station and the NASA Electronic Parts. and Packaging Program. A collection of the most pertinent information gathered during project support over the past year in regards to space flight performance of optical fiber components is presented here. The objective is to provide guidance for future space flight designs of instrumentation and communication systems.

Evaluating the impact and costs of deploying an electronic medical record system to support TB treatment in Peru

PubMed Central

Fraser, Hamish SF; Blaya, Joaquin; Choi, Sharon S; Bonilla, Cesar; Jazayeri, Darius

2006-01-01

The PIH-EMR is a Web based electronic medical record that has been in operation for over four years in Peru supporting the treatment of drug resistant TB. We describe here the types of evaluations that have been performed on the EMR to assess its impact on patient care, reporting, logistics and observational research. Formal studies have been performed on components for drug order entry, drug requirements prediction tools and the use of PDAs to collect bacteriology data. In addition less formal data on the use of the EMR for reporting and research are reviewed. Experience and insights from porting the PIH-EMR to the Philippines, and modifying it to support HIV treatment in Haiti and Rwanda are discussed. We propose that additional data of this sort is valuable in assessing medical information systems especially in resource poor areas. PMID:17238344

Evaluating the impact and costs of deploying an electronic medical record system to support TB treatment in Peru.

PubMed

Fraser, Hamish S F; Blaya, Joaquin; Choi, Sharon S; Bonilla, Cesar; Jazayeri, Darius

2006-01-01

The PIH-EMR is a Web based electronic medical record that has been in operation for over four years in Peru supporting the treatment of drug resistant TB. We describe here the types of evaluations that have been performed on the EMR to assess its impact on patient care, reporting, logistics and observational research. Formal studies have been performed on components for drug order entry, drug requirements prediction tools and the use of PDAs to collect bacteriology data. In addition less formal data on the use of the EMR for reporting and research are reviewed. Experience and insights from porting the PIH-EMR to the Philippines, and modifying it to support HIV treatment in Haiti and Rwanda are discussed. We propose that additional data of this sort is valuable in assessing medical information systems especially in resource poor areas.

77 FR 65370 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Alter a System of Records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records in its inventory of record... Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221, or by phone...

77 FR 3238 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice To Amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record... Office, Headquarters, Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort...

76 FR 39390 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-06

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing... Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221...

76 FR 65185 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-20

...; System of Records AGENCY: Defense Logistics Agency, Department of Defense. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice... Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221, or by phone...

77 FR 9632 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record... Office, Headquarters, Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort...

76 FR 11213 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing..., Headquarters Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 26714 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Delete a System of Records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing..., Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 11213 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing..., Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 76149 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing...: Ms. Jody Sinkler at (703) 767-5045, or DLA FOIA/Privacy Act Office, Headquarters, Defense Logistics...

Solutions for medical databases optimal exploitation.

PubMed

Branescu, I; Purcarea, V L; Dobrescu, R

2014-03-15

The paper discusses the methods to apply OLAP techniques for multidimensional databases that leverage the existing, performance-enhancing technique, known as practical pre-aggregation, by making this technique relevant to a much wider range of medical applications, as a logistic support to the data warehousing techniques. The transformations have practically low computational complexity and they may be implemented using standard relational database technology. The paper also describes how to integrate the transformed hierarchies in current OLAP systems, transparently to the user and proposes a flexible, "multimodel" federated system for extending OLAP querying to external object databases.

Army Logistician. Volume 36, Issue 2, March-April 2004

DTIC Science & Technology

2004-04-01

commitment. The depots’ highly skilled and motivat- ed workforces deserve our thanks for a job well done and our appreciation of the formidable...outsourcing for logistics support. Contractors are now an integral part of the wider Department of Defense workforce that delivers combat support to the...LEANNE J. WOON IS THE OFFICER COMMANDING THE LOGISTICS MANAGEMENT SQUADRON AT ROYAL NEW ZEALAND AIR FORCE (RNZAF) BASE AUCKLAND , WHERE SHE MANAGES

Analysis of Logistics Support via Acquisition and Cross-Servicing Agreements and Contracted Support

DTIC Science & Technology

2017-12-01

of goods and services in a contested environment and the ability to train , integrate, account, and manage civilian contractors. Survivability is...because logisticians are tasked with delivering goods and services to forces that are distributed across the globe, completing a wide variety of missions...to understand 3 where the responsibilities of logistics requirements lie and how to procure goods and services in different theaters. In an

Analysis of Contractor Logistics Support for the P-8 Poseidon Aircraft

DTIC Science & Technology

2008-06-01

15. NUMBER OF PAGES 103 14. SUBJECT TERMS Original Equipment Manufacturer, Contractor Logistics Support, P-8A Aircraft , 16. PRICE CODE 17...Communications Rack Mission Equipment Rack Galley G4 INMARSAT Antenna MAD Folding Stairs Crew Rest Observer Stations (2) CFM-56-7B 180 kVA IDG Engines (2...Poseidon Aircraft By: Shane Tallant, Scott Hedrick, and Michael Martin Advisors: Diana Petross Keebom Kang

Comparison of medication safety effectiveness among nine critical access hospitals.

PubMed

Cochran, Gary L; Haynatzki, Gleb

2013-12-15

The rates of medication errors across three different medication dispensing and administration systems frequently used in critical access hospitals (CAHs) were analyzed. Nine CAHs agreed to participate in this prospective study and were assigned to one of three groups based on similarities in their medication-use processes: (1) less than 10 hours per week of onsite pharmacy support and no bedside barcode system, (2) onsite pharmacy support for 40 hours per week and no bedside barcode system, and (3) onsite pharmacy support for 40 or more hours per week with a bedside barcode system. Errors were characterized by severity, phase of origination, type, and cause. Characteristics of the medication being administered and a number of best practices were collected for each medication pass. Logistic regression was used to identify significant predictors of errors. A total of 3103 medication passes were observed. More medication errors originated in hospitals that had onsite pharmacy support for less than 10 hours per week and no bedside barcode system than in other types of hospitals. A bedside barcode system had the greatest impact on lowering the odds of an error reaching the patient. Wrong dose and omission were common error types. Human factors and communication were the two most frequently identified causes of error for all three systems. Medication error rates were lower in CAHs with 40 or more hours per week of onsite pharmacy support with or without a bedside barcode system compared with hospitals with less than 10 hours per week of pharmacy support and no bedside barcode system.

Predicting U.S. Army Reserve Unit Manning Using Market Demographics

DTIC Science & Technology

2015-06-01

develops linear regression , classification tree, and logistic regression models to determine the ability of the location to support manning requirements... logistic regression model delivers predictive results that allow decision-makers to identify locations with a high probability of meeting unit...manning requirements. The recommendation of this thesis is that the USAR implement the logistic regression model. 14. SUBJECT TERMS U.S

32 CFR 323.6 - Exemption rules.

Code of Federal Regulations, 2013 CFR

2013-07-01

... DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM § 323.6 Exemption rules. (a) The Director, DLA or designee may... proceedings. (c) Exempt Records Systems. All systems of records maintained by the Defense Logistics Agency... Identifier: S500.20 (Specific exemption). (1) System name: Defense Logistics Agency (DLA) Criminal Incident...

32 CFR 323.6 - Exemption rules.

Code of Federal Regulations, 2014 CFR

2014-07-01

... DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM § 323.6 Exemption rules. (a) The Director, DLA or designee may... proceedings. (c) Exempt Records Systems. All systems of records maintained by the Defense Logistics Agency... Identifier: S500.20 (Specific exemption). (1) System name: Defense Logistics Agency (DLA) Criminal Incident...

Effects of the Extraterrestrial Environment on Plants: Recommendations for Future Space Experiments for the MELiSSA Higher Plant Compartment.

PubMed

Wolff, Silje A; Coelho, Liz H; Karoliussen, Irene; Jost, Ann-Iren Kittang

2014-05-05

Due to logistical challenges, long-term human space exploration missions require a life support system capable of regenerating all the essentials for survival. Higher plants can be utilized to provide a continuous supply of fresh food, atmosphere revitalization, and clean water for humans. Plants can adapt to extreme environments on Earth, and model plants have been shown to grow and develop through a full life cycle in microgravity. However, more knowledge about the long term effects of the extraterrestrial environment on plant growth and development is necessary. The European Space Agency (ESA) has developed the Micro-Ecological Life Support System Alternative (MELiSSA) program to develop a closed regenerative life support system, based on micro-organisms and higher plant processes, with continuous recycling of resources. In this context, a literature review to analyze the impact of the space environments on higher plants, with focus on gravity levels, magnetic fields and radiation, has been performed. This communication presents a roadmap giving directions for future scientific activities within space plant cultivation. The roadmap aims to identify the research activities required before higher plants can be included in regenerative life support systems in space.

Effects of the Extraterrestrial Environment on Plants: Recommendations for Future Space Experiments for the MELiSSA Higher Plant Compartment

PubMed Central

Wolff, Silje A.; Coelho, Liz H.; Karoliussen, Irene; Jost, Ann-Iren Kittang

2014-01-01

Due to logistical challenges, long-term human space exploration missions require a life support system capable of regenerating all the essentials for survival. Higher plants can be utilized to provide a continuous supply of fresh food, atmosphere revitalization, and clean water for humans. Plants can adapt to extreme environments on Earth, and model plants have been shown to grow and develop through a full life cycle in microgravity. However, more knowledge about the long term effects of the extraterrestrial environment on plant growth and development is necessary. The European Space Agency (ESA) has developed the Micro-Ecological Life Support System Alternative (MELiSSA) program to develop a closed regenerative life support system, based on micro-organisms and higher plant processes, with continuous recycling of resources. In this context, a literature review to analyze the impact of the space environments on higher plants, with focus on gravity levels, magnetic fields and radiation, has been performed. This communication presents a roadmap giving directions for future scientific activities within space plant cultivation. The roadmap aims to identify the research activities required before higher plants can be included in regenerative life support systems in space. PMID:25370192

Component-Level Electronic-Assembly Repair (CLEAR) Analysis of the Problem Reporting and Corrective Action (PRACA) Database of the International Space Station On-Orbit Electrical Systems

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Bradish, Martin A.; Juergens, Jeffrey R.; Lewis, Michael J.

2011-01-01

The NASA Constellation Program is investigating and developing technologies to support human exploration of the Moon and Mars. The Component-Level Electronic-Assembly Repair (CLEAR) task is part of the Supportability Project managed by the Exploration Technology Development Program. CLEAR is aimed at enabling a flight crew to diagnose and repair electronic circuits in space yet minimize logistics spares, equipment, and crew time and training. For insight into actual space repair needs, in early 2008 the project examined the operational experience of the International Space Station (ISS) program. CLEAR examined the ISS on-orbit Problem Reporting and Corrective Action database for electrical and electronic system problems. The ISS has higher than predicted reliability yet, as expected, it has persistent problems. A goal was to identify which on-orbit electrical problems could be resolved by a component-level replacement. A further goal was to identify problems that could benefit from the additional diagnostic and test capability that a component-level repair capability could provide. The study indicated that many problems stem from a small set of root causes that also represent distinct component problems. The study also determined that there are certain recurring problems where the current telemetry instrumentation and built-in tests are unable to completely resolve the problem. As a result, the root cause is listed as unknown. Overall, roughly 42 percent of on-orbit electrical problems on ISS could be addressed with a component-level repair. Furthermore, 63 percent of on-orbit electrical problems on ISS could benefit from additional external diagnostic and test capability. These results indicate that in situ component-level repair in combination with diagnostic and test capability can be expected to increase system availability and reduce logistics. The CLEAR approach can increase the flight crew s ability to act decisively to resolve problems while reducing dependency on Earth-supplied logistics for future Constellation Program missions.

Coregistered photoacoustic and ultrasound imaging and classification of ovarian cancer: ex vivo and in vivo studies

NASA Astrophysics Data System (ADS)

Salehi, Hassan S.; Li, Hai; Merkulov, Alex; Kumavor, Patrick D.; Vavadi, Hamed; Sanders, Melinda; Kueck, Angela; Brewer, Molly A.; Zhu, Quing

2016-04-01

Most ovarian cancers are diagnosed at advanced stages due to the lack of efficacious screening techniques. Photoacoustic tomography (PAT) has a potential to image tumor angiogenesis and detect early neovascular changes of the ovary. We have developed a coregistered PAT and ultrasound (US) prototype system for real-time assessment of ovarian masses. Features extracted from PAT and US angular beams, envelopes, and images were input to a logistic classifier and a support vector machine (SVM) classifier to diagnose ovaries as benign or malignant. A total of 25 excised ovaries of 15 patients were studied and the logistic and SVM classifiers achieved sensitivities of 70.4 and 87.7%, and specificities of 95.6 and 97.9%, respectively. Furthermore, the ovaries of two patients were noninvasively imaged using the PAT/US system before surgical excision. By using five significant features and the logistic classifier, 12 out of 14 images (86% sensitivity) from a malignant ovarian mass and all 17 images (100% specificity) from a benign mass were accurately classified; the SVM correctly classified 10 out of 14 malignant images (71% sensitivity) and all 17 benign images (100% specificity). These initial results demonstrate the clinical potential of the PAT/US technique for ovarian cancer diagnosis.

Survey of RFID and Its Application to International Ocean/Air Container Tracking

NASA Astrophysics Data System (ADS)

Katayama, Minoru; Nakada, Hiroshi; Hayashi, Hitoshi; Shimizu, Masashi

“Internet of Things” (IoT) requires information to be collected from “anything”, “anytime”, and “anywhere”. In order to achieve this, wireless devices are required that have (1) automatic data acquisition capability, (2) small size, (3) long life, and (4) long range communication capability. One way to meet these requirements is to adopt active Radio Frequency Identification (RFID) systems. Active RFID is more advantageous than passive RFID and enables higher data reading performance over longer distances. This paper surveys active RFID systems, the services they currently promise to provide, technical problems common to these services, and the direction in which research should head in the future. It also reports the results of EPCglobal (EPC: Electronic Product Code) pilot tests conducted on global logistics for tracking ocean/air container transportation using active RFID systems for which we developed several new types of active RFID tags. The test results confirm that our active RFID tags have sufficient capability and low power consumption to well support ocean/air transportation and logistics service.

KSC-98pc1776

NASA Image and Video Library

1998-12-03

KENNEDY SPACE CENTER, FLA. -- Participants pose for a photo at the Space Station Processing Facility ceremony transferring the "Leonardo" Multipurpose Logistics Module (MPLM) from the Italian Space Agency, Agenzia Spaziale Italiana (ASI), to NASA. From left, they are astronaut Jim Voss, European Space Agency astronauts Umberto Guidoni of Italy and Christer Fuglesang of Sweden, NASA International Space Station Program Manager Randy Brinkley, NASA Administrator Daniel S. Goldin, ASI President Sergio De Julio and Stephen Francois, director, International Space Station Launch Site Support at KSC. The MPLM, a reusable logistics carrier, will be the primary delivery system used to resupply and return International Space Station cargo requiring a pressurized environment. Leonardo is the first of three MPLM carriers for the International Space Station. It is scheduled to be launched on Space Shuttle Mission STS-100, targeted for April 2000

KSC-06pd0926

NASA Image and Video Library

2006-05-23

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout room on the rotating service structure on Launch Pad 39B, workers maneuver the multi-purpose logistics module Leonardo into Space Shuttle Discovery's payload bay (at left). The payload ground-handling mechanism (PGHM) is used to transfer the module into the payload bay. Leonardo is a reusable logistics carrier. It is the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Leonardo is part of the payload on mission STS-121. Other payloads include the integrated cargo carrier with the mobile transporter reel assembly and a spare pump module, and the lightweight multi-purpose experiment support structure carrier. Discovery is scheduled to launch in a window extending from July 1 through July 19. Photo credit: NASA/Jack Pfaller

KSC-06pd0925

NASA Image and Video Library

2006-05-23

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout room on the rotating service structure on Launch Pad 39B, the multi-purpose logistics module Leonardo is being moved into Space Shuttle Discovery's payload bay (at left). The payload ground-handling mechanism (PGHM) is used to transfer the module into the payload bay. Leonardo is a reusable logistics carrier. It is the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Leonardo is part of the payload on mission STS-121. Other payloads include the integrated cargo carrier with the mobile transporter reel assembly and a spare pump module, and the lightweight multi-purpose experiment support structure carrier. Discovery is scheduled to launch in a window extending from July 1 through July 19. Photo credit: NASA/Jack Pfaller

Trash to Supply Gas (TtSG) Project Overview

NASA Technical Reports Server (NTRS)

Hintze, Paul; Santiago-Maldonado, Edgardo; Kulis, Michael J.; Lytle, John K.; Fisher, John W.; Vaccaro, Helen; Ewert, Michael K.; Broyan, James L.

2012-01-01

Technologies that reduce logistical needs are a key to long term space missions. Currently, trash and waste generated during a mission is carried during the entire roundtrip mission or stored inside a logistic module which is de-orbited into Earth's atmosphere for destruction. The goal of the Trash to Supply Gas (TtSG) project is to develop space technology alternatives for converting trash and other waste materials from human spaceflight into high-value products that might include propellants or power system fuels in addition to life support oxygen and water. In addition to producing a useful product from waste, TtSG will decrease the volume needed to store waste on long term space missions. This paper presents an overview of the TtSG technologies and future plans for the project.

Integration of Biological, Physical/Chemical and Energy Efficient Systems in the CELSS Antarctic Analog: Performance of Prototype Systems and Issues for Life Support

NASA Technical Reports Server (NTRS)

Bubenheim, David L.; Flynn, Michael T.; Lamparter, Richard; Bates, Maynard; Kliss, Mark (Technical Monitor)

1998-01-01

The Controlled Ecological Life Support System (CELSS) Antarctic Analog Project (CAAP) is a joint endeavor between the National Science Foundation, Office of Polar Programs (NSF-OPP), and the National Aeronautics and Space Administration (NASA). The fundamental objective is to develop, deploy, and operate a testbed of advanced life support technologies at the Amundsen-Scott South Pole Station that enable the objectives of both the NSF and NASA. The functions of food production, water purification, and waste treatment, recycle, and reduction provided by CAAP will improve the quality of life for the South Pole inhabitants, reduce logistics dependence, enhance safety, and minimize environmental impacts associated with human presence on the polar plateau. Because of the analogous technical, scientific, and mission features with Planetary missions, such as a mission to Mars, CAAP provides NASA with a method for validating technologies and overall approaches to supporting humans. Prototype systems for waste treatment, water recycle, resource recovery and crop production are being evaluated in a testbed at Ames Research Center. The combined performance of these biological and physical/chemical systems as an integrated function in support of the human habitat will be discussed. Overall system performance will be emphasized. The effectiveness and efficiency of component technologies will be discussed in the context of energy and mass flow within the system and contribution to achieving a mass and energy conservative system. Critical to the discussion are interfaces with habitat functions outside of the closed-loop life support: the ability of the system to satisfy the life support requirements of the habitat and the ability to define input requirements. The significance of analog functions in relation to future Mars habitats will be discussed.

Induced abortion: risk factors for adolescent female students, a Brazilian study.

PubMed

Correia, Divanise S; Cavalcante, Jairo C; Maia, Eulália M C

2009-12-16

The purpose of this study was to analyze risk factors for abortion among female teenagers from 12 to 19 years of age in the city of Maceió, Brazil. This is a cross-sectional study, conducted in ten schools. The sample was calculated by considering the number of admissions for postabortion curettage, obtained from the Information System of Hospitalization. Data were obtained through a semi-structured questionnaire divided into three basic blocks of data: sociodemographic, sexual life, and pregnancy/abortion. To analyze the data, the logistic regression model was used. The Forward Method was chosen to set the final model that minimizes the number of variables and maximizes the accuracy of the model. The significant analysis between the dichotomous variables provided eight significant variables. Two of them are protective for abortion: the ages 12-14 years and talking with parents about sex. After the logistic regression, the receipt of support for abortion was the most significant variable of all. The adolescent with an active sexual life, a previous pregnancy, who is married, and has received support for an abortion has a 99.74% probability for an abortion. The results of this study, demonstrating the importance of the group in adolescence, and the statistical significance of having a partner to support and approve the pregnancy appears as a preventive factor for abortion. It shows the importance of support and companionship for adolescent women.

On the efficiency of the image encryption and decryption by using logistic-sine chaotic system and logistic-tent chaotic system

NASA Astrophysics Data System (ADS)

Chiun, Lee Chia; Mandangan, Arif; Daud, Muhamad Azlan; Hussin, Che Haziqah Che

2017-04-01

We may secure the content of text, audio, image and video during their transmission from one party to another party via an open channel such as the internet by using cryptograph. Logistic-Sine System (LSS) is a combination on two 1D chaotic maps which are Logistic Map and Sine Map. By applying the LSS into cryptography, the image encryption and decryption can be performed. This study is focusing on the performance test of the image encryption and decryption processes by using the LSS. For comparison purpose, we compare the performance of the encryption and decryption by using two different chaotic systems, which are the LSS and Logistic-Tent System (LTS). The result shows that system with LSS is less efficient than LTS in term of encryption time but both systems have similar efficiency in term of decryption time.

FIRRE command and control station (C2)

NASA Astrophysics Data System (ADS)

Laird, R. T.; Kramer, T. A.; Cruickshanks, J. R.; Curd, K. M.; Thomas, K. M.; Moneyhun, J.

2006-05-01

The Family of Integrated Rapid Response Equipment (FIRRE) is an advanced technology demonstration program intended to develop a family of affordable, scalable, modular, and logistically supportable unmanned systems to meet urgent operational force protection needs and requirements worldwide. The near-term goal is to provide the best available unmanned ground systems to the warfighter in Iraq and Afghanistan. The overarching long-term goal is to develop a fully-integrated, layered force protection system of systems for our forward deployed forces that is networked with the future force C4ISR systems architecture. The intent of the FIRRE program is to reduce manpower requirements, enhance force protection capabilities, and reduce casualties through the use of unmanned systems. FIRRE is sponsored by the Office of the Under Secretary of Defense, Acquisitions, Technology and Logistics (OUSD AT&L), and is managed by the Product Manager, Force Protection Systems (PM-FPS). The FIRRE Command and Control (C2) Station supports two operators, hosts the Joint Battlespace Command and Control Software for Manned and Unmanned Assets (JBC2S), and will be able to host Mission Planning and Rehearsal (MPR) software. The C2 Station consists of an M1152 HMMWV fitted with an S-788 TYPE I shelter. The C2 Station employs five 24" LCD monitors for display of JBC2S software [1], MPR software, and live video feeds from unmanned systems. An audio distribution system allows each operator to select between various audio sources including: AN/PRC-117F tactical radio (SINCGARS compatible), audio prompts from JBC2S software, audio from unmanned systems, audio from other operators, and audio from external sources such as an intercom in an adjacent Tactical Operations Center (TOC). A power distribution system provides battery backup for momentary outages. The Ethernet network, audio distribution system, and audio/video feeds are available for use outside the C2 Station.

An Antarctic research outpost as a model for planetary exploration.

PubMed

Andersen, D T; McKay, C P; Wharton, R A; Rummel, J D

1990-01-01

During the next 50 years, human civilization may well begin expanding into the solar system. This colonization of extraterrestrial bodies will most likely begin with the establishment of small research outposts on the Moon and/or Mars. In all probability these facilities, designed primarily for conducting exploration and basic science, will have international participation in their crews, logistical support and funding. High fidelity Earth-based simulations of planetary exploration could help prepare for these expensive and complex operations. Antarctica provides one possible venue for such a simulation. The hostile and remote dry valleys of southern Victoria Land offer a valid analog to the Martian environment but are sufficiently accessible to allow routine logistical support and to assure the relative safety of their inhabitants. An Antarctic research outpost designed as a planetary exploration simulation facility would have great potential as a testbed and training site for the operation of future Mars bases and represents a near-term, relatively low-cost alternative to other precursor activities. Antarctica already enjoys an international dimension, an aspect that is more than symbolically appropriate to an international endeavor of unprecedented scientific and social significance--planetary exploration by humans. Potential uses of such a facility include: 1) studying human factors in an isolated environment (including long-term interactions among an international crew); 2) testing emerging technologies (e.g., advanced life support facilities such as a partial bioregenerative life support system, advanced analytical and sample acquisition instrumentation and equipment, etc.); and 3) conducting basic scientific research similar to the research that will be conducted on Mars, while contributing to the planning for human exploration. (Research of this type is already ongoing in Antarctica).

Implementation of Local Wellness Policies in Schools: Role of School Systems, School Health Councils, and Health Disparities.

PubMed

Hager, Erin R; Rubio, Diana S; Eidel, G Stewart; Penniston, Erin S; Lopes, Megan; Saksvig, Brit I; Fox, Renee E; Black, Maureen M

2016-10-01

Written local wellness policies (LWPs) are mandated in school systems to enhance opportunities for healthy eating/activity. LWP effectiveness relies on school-level implementation. We examined factors associated with school-level LWP implementation. Hypothesized associations included system support for school-level implementation and having a school-level wellness team/school health council (SHC), with stronger associations among schools without disparity enrollment (majority African-American/Hispanic or low-income students). Online surveys were administered: 24 systems (support), 1349 schools (LWP implementation, perceived system support, SHC). The state provided school demographics. Analyses included multilevel multinomial logistic regression. Response rates were 100% (systems)/55.2% (schools). Among schools, 44.0% had SHCs, 22.6% majority (≥75%) African-American/Hispanic students, and 25.5% majority (≥75%) low-income (receiving free/reduced-price meals). LWP implementation (17-items) categorized as none = 36.3%, low (1-5 items) = 36.3%, high (6+ items) = 27.4%. In adjusted models, greater likelihood of LWP implementation was observed among schools with perceived system support (high versus none relative risk ratio, RRR = 1.63, CI: 1.49, 1.78; low versus none RRR = 1.26, CI: 1.18, 1.36) and SHCs (high versus none RRR = 6.8, CI: 4.07, 11.37; low versus none RRR = 2.24, CI: 1.48, 3.39). Disparity enrollment did not moderate associations (p > .05). Schools with perceived system support and SHCs had greater likelihood of LWP implementation, with no moderating effect of disparity enrollment. SHCs/support may overcome LWP implementation obstacles related to disparities. © 2016, American School Health Association.

[Stakeholder representations of the role of the intermediate level of the DRC health system].

PubMed

Mbeva, Jean Bosco Kahindo; Karemere, Hermès; Schirvel, Carole; Porignon, Denis

2014-01-01

Intermediate health care structures in the DRC were designed during the setting-up of primary health care in a perspective of health district support. This study was designed to describe stakeholder representations of the intermediate level of the DRC health system during the first 30 years of the primary health care system. This case study was based on inductive analysis of data from 27 key informant interviews.. The intermediate level of the health system, lacking sufficient expertise and funding during the 1980s, was confined to inspection and control functions, answering to the central level of the Ministry of health and provincial authorities. Since the 1990s, faced with the pressing demand for support from health district teams, whose self-management had to deal with humanitarian emergencies, the need to integrate vertical programmes, and cope with the logistics of many different actors, the intermediate heath system developed methods and tools to support heath districts. This resulted in a subsidiary model of the intermediate level, the perceived efficacy of which varies according to the province over recent years. The "subsidiary" model of the intermediary health system level seems a good alternative to the "control" model in DRC.

32 CFR Appendix H to Part 323 - DLA Exemption Rules

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM Pt. 323, App. H Appendix H to Part 323—DLA Exemption Rules Exempted Records Systems. All systems of records maintained by the Defense Logistics Agency will.... b. ID: S500.20 (Specific exemption). 1. System name: Defense Logistics Agency Criminal Incident...

Social Support, Help-Seeking, and Mental Health Outcomes Among Veterans in Non-VA Facilities: Results from the Veterans’ Health Study

PubMed Central

Adams, Richard E.; Urosevich, Thomas G.; Hoffman, Stuart N.; Kirchner, H. Lester; Hyacinthe, Johanna C.; Figley, Charles R.; Boscarino, Joseph J.; Boscarino, Joseph A.

2017-01-01

Using a stress process model, the authors examined social and psychological resources to better understand mental health outcomes among veterans. For this study, we surveyed 700 U.S. veterans who were outpatients in the Geisinger Health System. Independent variables included demographic factors, stressful and traumatic events, social support measures, and psychosocial factors. Using logistic regression, the authors examined 4 types of social connections: social support, help-seeking support, social capital, and other mental health support to predict mental health outcomes, including posttraumatic stress disorder, depression, suicide ideation, alcohol misuse, mental health service use, and Veterans Affairs service use. Results suggested that help-seeking support since deployment was a risk factor for 5 adverse outcomes, whereas social support was protective for 1 outcome. We concluded that high levels of help-seeking support since deployment among veterans was associated with a higher prevalence of mental health problems. These findings were unexpected and suggest the need for additional social support-related research among veterans. PMID:29098116

Leveraging Science and Technology to Improve Logistics

DTIC Science & Technology

2012-04-05

to the Banana Wars in the late 1920s, specifically the Nicaraguan campaign in 1927. To transport troops and supplies by air in support of combat...military culture of innovation. As the warfighters changed how they fought, the logisticians had to change how they supported the warfighter. When the US...operated to a high level of autonomy Max payload = 544kg TerraMax [Type: Large Wheeled Logistics UGV] [Status: In Development] A modified

The Pressurized Logistics Module: Providing Consumables and Resupply Logistics to the Lunar Surface for a Long-duration Manned Mission

NASA Technical Reports Server (NTRS)

Carpenter, Amanda; Knight, Amanda

2008-01-01

In response to President Bush s 2004 Vision for Space Exploration initiative, NASA established an agency-wide Lunar Architecture Team (LAT) to develop the high-level requirements, assumptions, ground-rules and objectives for a manned mission to the moon. During Phase II of the evaluation, the Habitation Focus Element Group was directed to conceptually develop and design a Pressurized Logistics Module (PLM). The PLM task was delivered with one major requirement: to derive a system with minimal mass and cost, and a maximum, functional, internal volumetric area in order to provide the maximum amount of consumables, supportability and logistic re-supply for a crew of four to the Lunar surface with an overall integrated maximum weight of 5200kg. The PLM was derived from the Habitation Group s "mini-Hab" option. This concept required that the PLM have an aluminum-clad graphite epoxy external truss, utilized for increased mobility and stability, which would encompass a 2.7 meter diameter pressurized aluminum-lithium cylinder. Several trade studies and analyses were performed to determine the final length and orientation of the module, the number of systems required to maintain the PLM, and the number of hatches/mating mechanisms which would successfully and efficiently meet the requirements. Of the five specific configurations assessed, the PLM was determined to have a 3 meter by 3 meter by 5 meter external truss with a 2.7 meter diameter and 5 meter long horizontal, pressurized cylinder with one hatch/mating mechanism on one end cone. Two major assumptions aided in the formulation of the technical baseline: 1) the PLM should be sustainable for up to 18 months on the Lunar Lander without connection to its final destination, the Lunar Outpost, and 2) it must be self-sufficient to withstand a maximum eight hour transit from the Lander to the Outpost. Per these assumptions, eight major systems constitute the PLM: structures, passive mating, protection, power, thermal, avionics, life support and outfitting. Including a conservative 20% growth, the overall estimated tare weight for the PLM was determined to be 2181kg. The tare weight of the design allowed the available internal volume of the cylinder with a 0.20 meter high floor to transport the maximum of either 176 single Crew Transfer Bags (CTBs) or 3019kg.

No rationale for 1 variable per 10 events criterion for binary logistic regression analysis.

PubMed

van Smeden, Maarten; de Groot, Joris A H; Moons, Karel G M; Collins, Gary S; Altman, Douglas G; Eijkemans, Marinus J C; Reitsma, Johannes B

2016-11-24

Ten events per variable (EPV) is a widely advocated minimal criterion for sample size considerations in logistic regression analysis. Of three previous simulation studies that examined this minimal EPV criterion only one supports the use of a minimum of 10 EPV. In this paper, we examine the reasons for substantial differences between these extensive simulation studies. The current study uses Monte Carlo simulations to evaluate small sample bias, coverage of confidence intervals and mean square error of logit coefficients. Logistic regression models fitted by maximum likelihood and a modified estimation procedure, known as Firth's correction, are compared. The results show that besides EPV, the problems associated with low EPV depend on other factors such as the total sample size. It is also demonstrated that simulation results can be dominated by even a few simulated data sets for which the prediction of the outcome by the covariates is perfect ('separation'). We reveal that different approaches for identifying and handling separation leads to substantially different simulation results. We further show that Firth's correction can be used to improve the accuracy of regression coefficients and alleviate the problems associated with separation. The current evidence supporting EPV rules for binary logistic regression is weak. Given our findings, there is an urgent need for new research to provide guidance for supporting sample size considerations for binary logistic regression analysis.

Instant messaging at the hospital: supporting articulation work?

PubMed

Iversen, Tobias Buschmann; Melby, Line; Toussaint, Pieter

2013-09-01

Clinical work is increasingly fragmented and requires extensive articulation and coordination. Computer systems may support such work. In this study, we investigate how instant messaging functions as a tool for supporting articulation work at the hospital. This paper aims to describe the characteristics of instant messaging communication in terms of number and length of messages, distribution over time, and the number of participants included in conversations. We also aim to determine what kind of articulation work is supported by analysing message content. Analysis of one month's worth of instant messages sent through the perioperative coordination and communication system at a Danish hospital. Instant messaging was found to be used extensively for articulation work, mostly through short, simple conversational exchanges. It is used particularly often for communication concerning the patient, specifically, the coordination and logistics of patient care. Instant messaging is used by all actors involved in the perioperative domain. Articulation work and clinical work are hard to separate in a real clinical setting. Predefined messages and strict workflow design do not suffice when supporting communication in the context of collaborative clinical work. Flexibility is of vital importance, and this needs to be reflected in the design of supportive communication systems. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Logistics of Guinea Worm Disease Eradication in South Sudan

PubMed Central

Jones, Alexander H.; Becknell, Steven; Withers, P. Craig; Ruiz-Tiben, Ernesto; Hopkins, Donald R.; Stobbelaar, David; Makoy, Samuel Yibi

2014-01-01

From 2006 to 2012, the South Sudan Guinea Worm Eradication Program reduced new Guinea worm disease (dracunculiasis) cases by over 90%, despite substantial programmatic challenges. Program logistics have played a key role in program achievements to date. The program uses disease surveillance and program performance data and integrated technical–logistical staffing to maintain flexible and effective logistical support for active community-based surveillance and intervention delivery in thousands of remote communities. Lessons learned from logistical design and management can resonate across similar complex surveillance and public health intervention delivery programs, such as mass drug administration for the control of neglected tropical diseases and other disease eradication programs. Logistical challenges in various public health scenarios and the pivotal contribution of logistics to Guinea worm case reductions in South Sudan underscore the need for additional inquiry into the role of logistics in public health programming in low-income countries. PMID:24445199

Logistics of Guinea worm disease eradication in South Sudan.

PubMed

Jones, Alexander H; Becknell, Steven; Withers, P Craig; Ruiz-Tiben, Ernesto; Hopkins, Donald R; Stobbelaar, David; Makoy, Samuel Yibi

2014-03-01

From 2006 to 2012, the South Sudan Guinea Worm Eradication Program reduced new Guinea worm disease (dracunculiasis) cases by over 90%, despite substantial programmatic challenges. Program logistics have played a key role in program achievements to date. The program uses disease surveillance and program performance data and integrated technical-logistical staffing to maintain flexible and effective logistical support for active community-based surveillance and intervention delivery in thousands of remote communities. Lessons learned from logistical design and management can resonate across similar complex surveillance and public health intervention delivery programs, such as mass drug administration for the control of neglected tropical diseases and other disease eradication programs. Logistical challenges in various public health scenarios and the pivotal contribution of logistics to Guinea worm case reductions in South Sudan underscore the need for additional inquiry into the role of logistics in public health programming in low-income countries.

dLOGIS: Disaster Logistics Information System

NASA Astrophysics Data System (ADS)

Koesuma, Sorja; Riantana, Rio; Siswanto, Budi; Aji Purnomo, Fendi; Lelono, Sarjoko

2017-11-01

There are three timing of disaster mitigation which is pre-disaster, emergency response and post-disaster. All of those is important in disaster mitigation, but emergency response is important when we are talking about time. Emergency response has limited time when we should give help. Rapid assessment of kind of logistic, the number of survivors, number children and old people, their gender and also for difable person. It should be done in emergency response time. Therefore we make a mobile application for logistics management system. The name of application is dLOGIS, i.e. Disaster Logistics Information System. The application is based on Android system for mobile phone. Otherwise there is also website version. The website version is for maintenance, data input and registration. So the people or government can use it directly when there is a disaster. After login in dLOGIS, there is five main menus. The first main menu shows disaster information, refugees conditions, logistics needed, available logistics stock and already accepted logistics. In the second menu is used for entering survivors data. The field coordinator can enter survivors data based on the rapid assessment in disaster location. The third menu is used for entering kind of logistic. Number and kind of logistics are based on the BNPB needed standard for the survivor. The fourth menu displays the logistics stock available in field coordinator. And the last menu displays the logistics help that already accepted and sent by donation. By using this application when a disaster happened, field coordinator or local government can use maintenance distribution of logistics base on their needs. Also for donor people who will give help to survivor, they can give logistics with the corresponding of survivor needs.

Preliminary study of the space adaptation of the MELiSSA life support system

NASA Astrophysics Data System (ADS)

Mas-Albaigès, Joan L.; Duatis, Jordi; Podhajsky, Sandra; Guirado, Víctor; Poughon, Laurent

MELiSSA (Micro-Ecological Life Support System Alternative) is an European Space Agency (ESA) project focused on the development of a closed regenerative life support system to aid the development of technologies for future life support systems for long term manned planetary missions, e.g. a lunar base or missions to Mars. In order to understand the potential evolution of the MELiSSA concept towards its future use in the referred manned planetary mission context the MELiSSA Space Adaptation (MSA) activity has been undertaken. MSA's main objective is to model the different MELiSSA compartments using EcosimPro R , a specialized simulation tool for life support applications, in order to define a preliminary MELiSSA implementation for service in a man-tended lunar base scenario, with a four-member crew rotating in six-month increments, and performing the basic LSS functions of air revitalization, food production, and waste and water recycling. The MELiSSA EcosimPro R Model features a dedicated library for the different MELiSSA elements (bioreactors, greenhouse, crew, interconnecting elements, etc.). It is used to dimension the MELiSSA system in terms of major parameters like mass, volume and energy needs, evaluate the accuracy of the results and define the strategy for a progressive loop closure from the initial required performance (approx.100 The MELiSSA configuration(s) obtained through the EcosimPro R simulation are further analysed using the Advanced Life Support System Evaluation (ALISSE) metric, relying on mass, energy, efficiency, human risk, system reliability and crew time, for trade-off and optimization of results. The outcome of the MSA activity is, thus, a potential Life Support System architecture description, based on combined MELiSSA and other physico-chemical technologies, defining its expected performance, associated operational conditions and logistic needs.

The Cost of Commonality: Assessing Value in Joint Programs

DTIC Science & Technology

2015-12-01

was the case with the U.S. auto market “ Big Three” during the 2008–2010 automotive industry crisis, it is not profitable to simply produce goods...Newsome, & Lewis, 2008). Common logistics warehouses and distribution centers that support system sustainment are important mechanisms for lowering...Artery Tunnel Project, also known as the Big Dig. This megaproject was the most expensive highway construction effort in U.S. history. It was finally