Surgical treatment of avulsion fractures at the tibial insertion of the posterior cruciate ligament: functional result☆

PubMed Central

Barros, Marcos Alexandre; Cervone, Gabriel Lopes de Faria; Costa, André Luis Serigatti

2015-01-01

Objective To objectively and subjectively evaluate the functional result from before to after surgery among patients with a diagnosis of an isolated avulsion fracture of the posterior cruciate ligament who were treated surgically. Method Five patients were evaluated by means of reviewing the medical files, applying the Lysholm questionnaire, physical examination and radiological examination. For the statistical analysis, a significance level of 0.10 and 95% confidence interval were used. Results According to the Lysholm criteria, all the patients were classified as poor (<64 points) before the operation and evolved to a mean of 96 points six months after the operation. We observed that 100% of the posterior drawer cases became negative, taking values less than 5 mm to be negative. Conclusion Surgical methods with stable fixation for treating avulsion fractures at the tibial insertion of the posterior cruciate ligament produce acceptable functional results from the surgical and radiological points of view, with a significance level of 0.042. PMID:27218073

Chemical synovectomy with sodium morrhuate in the treatment of symptomatic recurrent knee joint effusion.

PubMed

Schaumburger, Jens; Trum, Stefanie; Anders, Sven; Beckmann, Johannes; Winkler, Sebastian; Springorum, Hans-Robert; Grifka, Joachim; Lechler, Philipp

2012-10-01

The aim of this study was to assess the efficacy and safety of intra-articular sodium morrhuate injections in the treatment of recurrent knee joint effusions. Ninety-eight knees of 92 patients (f = 59, m = 33) with knee arthritis of heterogeneous etiology were treated with chemical synovectomy (CSO). Of those, 39 patients suffered from rheumatoid arthritis (RA). The mean follow-up was 29.8 months. Clinical outcome was evaluated by analyzing subjective patient satisfaction, activity level, pain severity on the basis of the Visual Analogue Pain Scale (VAS), Lysholm and Gillquist score, and the Knee Injury and Osteoarthritis Outcome Score (KOOS). Fifty-seven percent of all patients and 67% of patients diagnosed with RA were satisfied with CSO. No significant effects on patient satisfaction by CSO were noted in patients older than 40 years. Overall, VAS, Lysholm and Gillquist score, and KOOS improved significantly at final review. The intra-articular application of sodium morrhuate is an effective and safe measure in the treatment of recurrent symptomatic knee joint effusions in young patients suffering from recurrent knee joint effusions.

Comparative evaluation of the results of three techniques in the reconstruction of the anterior cruciate ligament, with a minimum follow-up of two years.

PubMed

Cury, Ricardo de Paula Leite; Sprey, Jan Willem Cerf; Bragatto, André Luiz Lima; Mansano, Marcelo Valentim; Moscovici, Herman Fabian; Guglielmetti, Luiz Gabriel Betoni

2017-01-01

To compare the clinical results of the reconstruction of the anterior cruciate ligament by transtibial, transportal, and outside-in techniques. This was a retrospective study on 90 patients (ACL reconstruction with autologous flexor tendons) operated between August 2009 and June 2012, by the medial transportal (30), transtibial (30), and "outside-in" (30) techniques. The following parameters were assessed: objective and subjective IKDC, Lysholm, KT1000, Lachman test, Pivot-Shift and anterior drawer test. On physical examination, the Lachman test and Pivot-Shift indicated a slight superiority of the outside-in technique, but without statistical significance ( p  = 0.132 and p  = 0.186 respectively). The anterior drawer, KT1000, subjective IKDC, Lysholm, and objective IKDC tests showed similar results in the groups studied. A higher number of complications were observed in the medial transportal technique ( p  = 0.033). There were no statistically significant differences in the clinical results of patients undergoing reconstruction of the anterior cruciate ligament by transtibial, medial transportal, and outside-in techniques.

Surgical Treatment of Combined Posterior Root Tears of the Lateral Meniscus and ACL Tears

PubMed Central

Pan, Fengyu; Hua, Shan; Ma, Zhuang

2015-01-01

Background The treatment of anterior cruciate ligament (ACL) rupture complicated with posterior lateral meniscus root (PLMR) tears remains controversial. The goal of this study was to evaluate clinical outcomes of PLMR tear refixation versus left untreated at the time of reconstruction. Material/Methods From August 2001 to January 2012, 31 patients who undergone repair of PLMR tears were evaluated and compared with a matched control group with untreated PLMR tears. Clinical evaluation consisted of the Lysholm scale, subjective International Knee Documentation Committee (IKDC) questionnaires, and radiographic evaluation with MRI. Results Regarding to the Lysholm score and the subjective questionnaire score, there were no statistical difference between the 2 groups. However, patients after operative treatment reach higher functional scores and lower rates of osteoarthritis (normal: group A, 80%, and group B, 48%, respectively) with statistical significance (P<0.05) compared to the matched control group. Conclusions Surgical and conservative treatment of the PLMR can both effectively improve knee function. However, a tendency towards higher functional scores and lower rates of osteoarthritis for patients with operative treatment was observed. PMID:25959903

Bilateral cartilage T2 mapping 9 years after Mega-OATS implantation at the knee: a quantitative 3T MRI study.

PubMed

Jungmann, P M; Brucker, P U; Baum, T; Link, T M; Foerschner, F; Minzlaff, P; Banke, I J; Saier, T; Imhoff, A B; Rummeny, E J; Bauer, J S

2015-12-01

To evaluate morphological and quantitative MR findings 9 years after autograft transfer of the posterior femoral condyle (Mega-OATS) and to correlate these findings with clinical outcomes. Quantitative MR measurements were also obtained of the contralateral knee and the utility as reference standard was investigated. Both knees of 20 patients with Mega-OATS osteochondral repair at the medial femoral condyle (MFC) were studied using 3T MRI 9 years after the procedure. MR-sequences included morphological sequences and a 2D multislice multiecho (MSME) spin echo (SE) sequence for quantitative cartilage T2 mapping. Cartilage segmentation was performed at the cartilage repair site and six additional knee compartments. Semi-quantitative MR observation of cartilage repair tissue (MOCART) scores and clinical Lysholm scores were obtained. Paired t-tests and Spearman correlations were used for statistical analysis. Global T2-values were significantly higher at ipsilateral knees compared to contralateral knees (42.1 ± 3.0 ms vs 40.4 ± 2.6 ms, P = 0.018). T2-values of the Mega-OATS site correlated significantly with MOCART scores (R = -0.64, P = 0.006). The correlations between MOCART and Lysholm scores and between absolute T2-values and Lysholm scores were not significant (P > 0.05). However, higher T2 side-to-side differences at the femoral condyles correlated significantly with more severe clinical symptoms (medial, R = -0.53, P = 0.030; lateral, R = -0.51, P = 0.038). Despite long-term survival, 9 years after Mega-OATS procedures, T2-values of the grafts were increased compared to contralateral knees. Clinical scores correlated best with T2 side-to-side differences of the femoral condyles, indicating that intraindividual adjustment may be beneficial for outcome evaluation. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Impact of Patient Sex on Clinical Outcomes

PubMed Central

Teitsma, Xavier M.; van der Hoeven, Henk; Tamminga, Rob; de Bie, Rob A.

2014-01-01

Background: The Combined Quality Care Anterior Cruciate Ligament registry provides data for clinical research regarding primary anterior cruciate ligament (ACL) surgery. Purpose: To explore the data with regard to the clinical outcomes between sexes after ACL reconstruction in a Dutch population. Study Design: Cohort study; Level of evidence, 3. Methods: Data involving patients diagnosed with an ACL tear and eligible for surgery were recorded. Isokinetic muscle strength, functional muscle performance, and anterior-posterior translation of the knee joint were documented preoperatively and at 3, 6, 9, and 12 months postoperatively. Patients completed the Knee Injury and Osteoarthritis Outcome Score (KOOS), Lysholm, and Tegner rating scales during each examination using a web-based questionnaire. Results: Approximately 90% of ACL injuries occurred during sport activities. The mean (SD) age at surgery was 28 (11) years for both men and women, and the majority of patients were treated with hamstring tendon autografts (94%). Four percent received bone–patellar tendon–bone autografts, and 2% of the patients received other grafts. Preoperatively, the KOOS, Lysholm, and Tegner scores were significantly higher in males. Twelve months postoperatively, both sexes showed comparable isokinetic strength (P = .336), knee laxity (P = .680), and hop test for distance (P = .122) when comparing the injured with the uninjured side. Self-reported knee function was comparable between sexes as assessed by the KOOS (P = .202), Lysholm (P = .872), and Tegner (P = .767) questionnaires during the 12-month follow-up. Conclusion: One year after ACL surgery, all patients had improved greatly, showing only minor differences between sexes. The male group showed slightly better results when evaluating self-reported knee questionnaires. Comparable outcomes and knee function between sexes can therefore be presumed with patients who are treated with hamstring tendon autografts in a Dutch population. Clinical Relevance: These results can be used during the clinical evaluation of patients who are eligible for ACL reconstruction. PMID:26535365

Function scores of different surgeries in the treatment of knee osteoarthritis: A PRISMA-compliant systematic review and network-meta analysis.

PubMed

Liu, Cheng-Yao; Li, Chuan-Dong; Wang, Liang; Ren, Shan; Yu, Fu-Bin; Li, Jin-Guang; Ma, Jiang-Xiong; Ma, Xing-Long

2018-05-01

Osteoarthritis (OA) is the third most common diagnosis made by general practitioners in older patients. The aim of this study was to compare the function scores of different surgeries in the treatment of knee osteoarthritis (KOA). Cohort studies about different surgical treatments for KOA were included with a comprehensive search in PubMed, Cochrane Library, and Embase. The standard mean difference (SMD) value was evaluated and the surface under the cumulative ranking (SUCRA) curve was drawn with a combination of direct and indirect evidence. A total of 265 eligible patients were enrolled and served as the nonoperative treatment group, osteotomy group, unicompartmental knee arthroplasty (UKA) group, total knee arthroplasty (TKA) group, and arthroscopic surgery group. Before surgery, 6 months after surgery, 1 year after surgery and 5 years after surgery, the hospital for special surgery (HSS) knee score, Lysholm score, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, and American knee society score (KSS) were recorded. A total of 9 cohort studies including 954 patients with KOA were finally enrolled into the study. The network-meta analysis revealed that osteotomy and UKA treatments showed a better efficacy on improving the function score. Our cohort study further confirmed that, a higher HSS knee score after 1 year and higher Lysholm score after 6 months and 1 year were observed in the osteotomy and UKA groups, while better HSS knee score and KSS after 6 months and 1 year were showed in the osteotomy and TKA groups. In the TKA group, Lysholm score and KSS were higher and WOMAC score was lower after 5 years than other groups. WOMAC score was lowest in the UKA group after 6 months, 1 year and 5 years of surgery. These results provide evidence that function scores of patients with KOA were improved by osteotomy, UKA, TKA, and arthroscopic surgery. And osteotomy and UKA showed better short-term efficacy, while TKA appeared better long-term efficacy.

Comparison of Bioabsorbable Interference Screws Composed of Poly-l-lactic Acid and Hydroxyapatite (PLLA-HA) to WasherLoc Tibial Fixation in Patients After Anterior Cruciate Ligament Reconstruction of the Knee Joint.

PubMed

Patkowski, Mateusz; Królikowska, Aleksandra; Reichert, Paweł

2016-01-01

The reconstruction of the anterior cruciate ligament (ACL) of the knee joint is a standard in ACL complete rupture treatment in athletes. One of the weakest points of this procedure is tibial fixation of grafts. The aim was, firstly, to evaluate patients 3-4 years after primary ACL reconstruction with the use of autologous ipsilateral STGR grafts and with tibial fixation using a bioabsorbable interference screw composed of PLLA-HA or WasherLoc, comparing the postoperative result to the preoperative condition and, secondly, to compare the results between the two groups of patients with different tibial fixation. Group I consisted of 20 patients with a bioabsorbable interference screw composed of PLLA-HA tibial fixation. In Group II, there were 22 patients after ACL reconstruction with the use of WasherLoc tibial fixation. The Lachman test, pivot-shift test, Lysholm Knee Scoring Scale and 2000 International Knee Documentation Committee (2000 IKDC) Subjective Knee Evaluation Form were used to evaluate the results. The intra-group comparison of the results of the 2000 IKDC Subjective Knee Evaluation Form and Lysholm Knee Scoring Scale obtained in the groups studied showed statistically significant differences between the evaluation performed preoperatively and postoperatively. The inter-group comparison of the results of the 2000 IKDC Subjective Knee Evaluation Form and Lysholm Knee Scoring Scale obtained postoperatively showed no statistically significant differences between the two groups. An evaluation 3-4 years after ACL reconstruction with the use of autologous ipsilateral STGR grafts demonstrated significant progress from the preoperative condition to the postoperative result in patients with tibial fixation using a bioabsorbable interference screw composed of PLLA-HA as well as in patients with WasherLoc tibial fixation. There were no differences found between the two groups of patients after ACL reconstruction in terms of manual stability testing or a subjective assessment of knee joint outcomes.

Is peroneal nerve injury associated with worse function after knee dislocation?

PubMed

Krych, Aaron J; Giuseffi, Steven A; Kuzma, Scott A; Stuart, Michael J; Levy, Bruce A

2014-09-01

Peroneal nerve palsy is a frequent and potentially disabling complication of multiligament knee dislocation, but little information exists on the degree to which patients recover motor or sensory function after this injury, and whether having this nerve injury--with or without complete recovery--is a predictor of inferior patient-reported outcome scores. The purposes of this study were to (1) report on motor and sensory recovery as well as patient-reported outcomes scores of patients with peroneal nerve injury from multiligament knee dislocation; (2) compare those endpoints between patients who had partial versus complete nerve injuries; and (3) compare patient-reported outcomes among patients who sustained peroneal nerve injuries after knee dislocation with a matched cohort of multiligament knee injuries without nerve injury. Thirty-two patients were identified, but five did not have 2-year followup and are excluded (16% lost to followup). Twenty-seven patients (24 male, three female) with peroneal nerve injury underwent multiligament knee reconstruction and were followed for 6.3 years (range, 2-18 years). Motor grades were assessed by examination and outcomes by International Knee Documentation Committee (IKDC) and Lysholm scores. Retrospectively, patients were divided into complete (n = 9) and partial nerve palsy (n = 18). Treatment for complete nerve palsy included an ankle-foot orthosis for all patients, nonoperative (one), neurolysis (two), tendon transfer (three), nerve transfer (one), and combined nerve/tendon transfer (one). Treatment for partial nerve palsy included nonoperative (12), neurolysis (four), nerve transfer (one), and combined nerve/tendon transfer (one). Furthermore, patients without nerve injury were matched by Schenck classification, age, and sex. Data were analyzed using univariate and multivariate models. Overall, 18 patients (69%) regained antigravity ankle dorsiflexion after treatment (three complete nerve palsy [38%] versus 15 partial nerve palsy [83%]; p = 0.06). One patient with complete nerve palsy (13%) and 13 patients with partial nerve palsy (72%) regained antigravity extensor hallucis longus strength (p = 0.01). IKDC and Lysholm scores were similar between complete nerve palsy and partial nerve palsy groups. After controlling for confounding variables such as patient age, body mass index, injury interval to surgery, mechanism of injury, bicruciate injury, and popliteal artery injury status, there was no difference between patients with peroneal nerve injury and those without on Lysholm or IKDC scores. With multiligament knee dislocation and associated peroneal nerve injury, patients with partial nerve injury are more likely to regain antigravity strength when compared with those with a complete nerve injury, but their overall function may not improve. After controlling for confounding variables in a multivariate model, there was no difference in Lysholm or IKDC scores between patients with peroneal nerve injury and those without. Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

EVALUATION OF THE RESULTS OF ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION USING FLEXOR TENDONS AND RIGID GUIDE TRANSVERSE SCREW

PubMed Central

de Castro, Renato Luiz Bevilacqua; Acras, Sandor Dosa

2015-01-01

Objective: The aim of this study was to analyze the results of ACL (anterior cruciate ligament) reconstruction using quadruple flexor tendons as grafts, with ligament fixation in the femur using a rigid guide transverse screw and in the tibia, using a cancellous screw with a fixing washer. Methods: 173 knees (166 from males and seven from females) that had undergone surgery with ACL reconstruction using this technique between December 2002 and February 2007 were evaluated. The mean age was 30 years (from 13 to 56 years), and the mean follow-up time was 30 months (6-55 months). We divided the knees into three groups, which were assessed using the Lysholm scale: Group A with six months of follow-up; Group B with 12 months of follow-up; and Group C with 24 months of follow-up. Results: We evaluated the results, and groups A, B and C received 94, 95 and 95 points respectively on the Lysholm scale. Conclusions: The surgical technique proved to be safe and easy to perform, with good results and a low complication rate. Also, its results were maintained throughout the study period of 24 months. PMID:27027002

Enhanced knee joint function due to accelerated rehabilitation exercise after anterior cruciate ligament reconstruction surgery in Korean male high school soccer players.

PubMed

Lee, Myungchun; Sung, Dong Jun; Lee, Joohyung; Oh, Inyoung; Kim, Sojung; Kim, Seungho; Kim, Jooyoung

2016-02-01

This study was conducted on Korean male high school soccer players who underwent anterior cruciate ligament reconstruction (ACLR) to identify the effects of an accelerated rehabilitation exercise (ARE) program on knee joint isometric strength, thigh circumference, Lysholm score, and active balance agility. We assigned eight test participants each to a physical therapy group (PTG) and an accelerated rehabilitation exercise group (AREG), and compared differences between the groups. Both the PTG and AREG showed significant increases in 30° away and 60° toward isometric strength after treatment. In addition, significant differences were observed in these strength tests between the two groups. Both groups also showed significant increases in thigh circumference, Lysholm score, and active balance agility after treatment, but no significant differences were observed between the two groups. We conclude that the ARE treatment was more effective for improving isometric strength of the knee joint than that of physical therapy, and that an active rehabilitation exercise program after ACLR had positive effects on recovery performance of patients with an ACL injury and their return to the playing field.

Preoperative Short Form Health Survey Score Is Predictive of Return to Play and Minimal Clinically Important Difference at a Minimum 2-Year Follow-up After Anterior Cruciate Ligament Reconstruction.

PubMed

Nwachukwu, Benedict U; Chang, Brenda; Voleti, Pramod B; Berkanish, Patricia; Cohn, Matthew R; Altchek, David W; Allen, Answorth A; Williams, Riley J

2017-10-01

There is increased interest in understanding the preoperative determinants of postoperative outcomes. Return to play (RTP) and the patient-reported minimal clinically important difference (MCID) are useful measures of postoperative outcomes after anterior cruciate ligament reconstruction (ACLR). To define the MCID after ACLR and to investigate the role of preoperative outcome scores for predicting the MCID and RTP after ACLR. Case-control study; Level of evidence, 3. There were 294 active athletes enrolled as part of an institutional ACL registry with a minimum 2-year follow-up who were eligible for inclusion. A questionnaire was administered to elicit factors associated with RTP. Patient demographic and clinical data as well as patient-reported outcome measures were captured as part of the registry. Outcome measures included the International Knee Documentation Committee (IKDC) subjective knee evaluation form, Lysholm scale, and 12-Item Short Form Health Survey (SF-12) physical component summary (PCS) and mental component summary (MCS). Preoperative outcome score thresholds predictive of RTP were determined using a receiver operating characteristic (ROC) with area under the curve (AUC) analysis. The MCID was calculated using a distribution-based method. Multivariable logistic models were fitted to identify predictors for achieving the MCID and RTP. At a mean (±SD) follow-up of 3.7 ± 0.7 years, 231 patients were included from a total 294 eligible patients. The mean age and body mass index were 26.7 ± 12.5 years and 23.7 ± 3.2 kg/m 2 , respectively. Of the 231 patients, 201 (87.0%) returned to play at a mean time of 10.1 months. Two-year postoperative scores on all measures were significantly increased from preoperative scores (IKDC: 50.1 ± 15.6 to 87.4 ± 10.7; Lysholm: 61.2 ± 18.1 to 89.5 ± 10.4; SF-12 PCS: 41.5 ± 9.0 to 54.7 ± 4.6; SF-12 MCS: 53.6 ± 8.1 to 55.7 ± 5.7; P < .001 for all). The corresponding MCID values were 9.0 (IKDC), 10.0 (Lysholm), 5.1 (SF-12 PCS), and 4.3 (SF-12 MCS). Preoperative score thresholds predictive of RTP were the following: IKDC, 60.9; Lysholm, 57.0; SF-12 PCS, 42.3; and SF-12 MCS, 48.3. These thresholds were not independently predictive but achieved significance as part of the multivariable analysis. In the multivariable analysis for RTP, preoperative SF-12 PCS scores above 42.3 (odds ratio [OR], 2.73; 95% CI, 1.09-7.62) and SF-12 MCS scores above 48.3 (OR, 4.41; 95% CI, 1.80-10.98) were predictive for achieving RTP; an ACL allograft (OR, 0.26; 95% CI, 0.06-1.00) was negatively predictive of RTP. In the multivariable analysis for the MCID, patients with higher preoperative scores were less likely to achieve the MCID ( P < .0001); however, a higher preoperative SF-12 MCS score was predictive of achieving the MCID on the IKDC form (OR, 1.27; 95% CI, 1.11-1.52) and Lysholm scale (OR, 1.08; 95% CI, 1.00-1.16). Medial meniscal injuries, older age, and white race were also associated with a decreased likelihood for achieving the MCID. Preoperative SF-12 MCS and PCS scores were predictive of RTP after ACLR; patients scoring above 42.3 on the SF-12 PCS and 48.3 on the SF-12 MCS were more likely to achieve RTP. Additionally, we defined the MCID after ACLR and found that higher SF-12 MCS scores were predictive of achieving the MCID on knee-specific questionnaires.

Arthroscopic Transplantation of Synovial Stem Cells Improves Clinical Outcomes in Knees With Cartilage Defects.

PubMed

Sekiya, Ichiro; Muneta, Takeshi; Horie, Masafumi; Koga, Hideyuki

2015-07-01

Transplantation of mesenchymal stem cells (MSCs) is one possible strategy to achieve articular cartilage repair. We previously reported that synovial MSCs were highly proliferative and able to undergo chondrogenesis. We also found that placing a suspension of synovial MSCs on a cartilage defect for 10 minutes promoted cartilage repair in rabbit and pig models. However, the in vivo efficacy of this approach has not been tested clinically. We asked whether transplantation of synovial MSCs improves (1) MRI features, (2) histologic features, and (3) clinical evaluation scores in patients with cartilage defects in the knee? Patients with a symptomatic single cartilage lesion of the femoral condyle were indicated for inclusion in our study, and between April 2008 and April 2011, 10 patients were enrolled in this study. All patients completed followups of 3 years or more. The average followup period was 52 months (range, 37-80 months). Synovial MSCs were expanded with 10% autologous human serum for 14 days after digestion. For transplantation, the patient was positioned so that the cartilage defect was facing upward, and synovial MSC suspension was placed on the cartilage defect with a syringe under arthroscopic control. The defect with the applied suspension then was held in the upward position for 10 minutes. Five patients underwent concomitant ACL reconstructions, among whom two had meniscus suturing performed simultaneously. For MRI quantification, the cartilage defect was scored from 0 to 5. Second-look arthroscopy was performed for four patients and biopsy specimens were evaluated histologically. Clinical outcome was assessed using the Lysholm score and Tegner Activity Level Scale at final followup. Comparisons of MRI and Lysholm scores before and after treatment for each patient were analyzed using the Wilcoxon signed-rank test. MRI score (median ± 95% CI) was 1.0 ± 0.3 before and 5.0 ± 0.7 after, and increased after treatment in each patient (p = 0.005). Second-look arthroscopy in four patients showed that the cartilage defect appeared to be qualitatively better in all cases. Histologic analyses showed hyaline cartilage in three patients and fibrous cartilage in one at the deep zone. The Lysholm score (median ± 95% CI) was 76 ± 7 before and 95 ± 3 after, and increased after treatment in each patient (p = 0.005). The Tegner Activity Level Scale did not decrease after treatment in each patient. For this small initial case series, transplantation of synovial MSCs was effective in terms of MRI score, qualitative histology, and Lysholm score. The use of synovial MSCs has an advantage in that the cells can be prepared at passage 0 in only 14 days. Transplantation of synovial MSCs may be less invasive than mosaicplasty and autologous chondrocyte implantation. To conclusively show the effectiveness of this treatment requires comparative studies, especially with more established arthroscopic procedures, such as marrow stimulation techniques. Level IV, therapeutic study.

Comparison of Clinical and Radiologic Results Between Partial Meniscectomy and Refixation of Medial Meniscus Posterior Root Tears: A Minimum 5-Year Follow-up.

PubMed

Chung, Kyu Sung; Ha, Jeong Ku; Yeom, Cheol Hyun; Ra, Ho Jong; Jang, Ho Su; Choi, Seung Hyuk; Kim, Jin Goo

2015-10-01

To compare the clinical and radiologic results of partial meniscectomy with those of refixation in patients with medial meniscus posterior root tears (MMPRTs) at a minimum 5-year follow-up. Between 2005 and 2009, patients with MMPRTs who had been followed up for at least 5 years after a partial meniscectomy (group M, n = 20) or pullout repair (group R, n = 37) were recruited. The mean follow-up duration was 67.5 months in group M and 72.0 months in group R. Clinical assessments, including the Lysholm score and International Knee Documentation Committee (IKDC) Subjective Knee Form score, and radiographic assessments, including the Kellgren-Lawrence (K-L) grade and medial joint space width, were evaluated preoperatively and at final follow-up. We compared the preoperative results with the final results in each group, and we compared the final results of groups M and R. Five-year survival rates were also evaluated. The mean Lysholm score (P = .039) and IKDC score (P = .037) improved significantly. However, the width of the medial joint space (P < .001) and K-L grade (P < .001) worsened significantly in both groups. When we compared the final results, group R had significantly better Lysholm scores (P = .002) and IKDC scores (P < .001) than group M. Group R showed less K-L grade progression (P = .005) and less medial joint space narrowing (P < .001) than group M. The rate of conversion to total knee arthroplasty was 35% in group M, whereas there was no conversion to total knee arthroplasty in group R. The 5-year survival rates in groups M and R were 75% and 100%, respectively (P < .001). For MMPRTs, refixation was more effective than partial meniscectomy in terms of the clinical and radiologic outcomes and survival for at least 5 years' follow-up. Refixation slowed the progression of arthritic changes compared with partial meniscectomy, although it did not prevent the progression of arthrosis completely. Level III, retrospective comparative study. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Prognostic factors of arthroscopic pull-out repair for a posterior root tear of the medial meniscus.

PubMed

Moon, Hong-Kyo; Koh, Yong-Gon; Kim, Yong-Chan; Park, Young-Sik; Jo, Seung-Bae; Kwon, Sae-Kwang

2012-05-01

Repair of a posterior root tear of the medial meniscus (MRT) decreases peak contact pressure by restoring hoop tension and is expected to prevent progression to osteoarthritis. The purposes of this study were (1) to report the clinical and magnetic resonance imaging (MRI) results of arthroscopic pull-out repair of the MRT and (2) to identify prognostic factors of poor outcome. Case series; Level of evidence, 4. Fifty-one patients (47 women, 4 men) who underwent arthroscopic pull-out repair of the MRT by a single surgeon were enrolled. Mean follow-up after surgery was 33 months (range, 24-44 months). To identify factors affecting final outcome, patient-specific factors, such as gender, age, body mass index, meniscus extrusion, extrusion increase, subchondral edema, degree of varus alignment (<5° or >5°), and cartilage status in the medial compartment (Outerbridge grade 1 or 2 lesion vs grade 3 or 4 lesion), were investigated. Final clinical outcomes were determined using a visual analog scale (VAS) for pain and patient satisfaction scores, American Knee Society (AKS) scores, and Lysholm scores, and MRI outcomes were determined by evaluating meniscus extrusion and articular cartilage status. Multiple regression analysis was performed to identify variables that independently affected clinical and MRI-determined outcomes. All clinical outcome measures significantly improved after surgery. Patients with Outerbridge grade 3 or 4 chondral lesions had poorer results than those with grade 1 or 2 lesions in terms of AKS function and Lysholm scores. Patients with varus alignment of >5° had poorer results than those with varus alignment of <5° in terms of VAS satisfaction, AKS function, and Lysholm scores. Mean meniscus extrusion increased from 3.6 mm preoperatively to 5.0 mm postoperatively. Chondral lesions progressed in 3 (9.7%) of 31 patients. Preoperative meniscus extrusion was found to be positively correlated with final extrusion. At a mean follow-up of 33 months after pull-out repair, extrusion of the meniscus was found to have progressed. Nevertheless, this technique provided patients with a clinical benefit. Outerbridge grade 3 or 4 chondral lesions and varus alignment of >5° were found to independently predict an inferior clinical outcome.

FUNCTIONAL PERFORMANCE AND KNEE LAXITY IN NORMAL INDIVIDUALS AND IN INDIVIDUALS SUBMITTED TO ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION

PubMed Central

de Vasconcelos, Rodrigo Antunes; Bevilaqua-Grossi, Débora; Shimano, Antonio Carlos; Jansen Paccola, Cleber Antonio; Salvini, Tânia Fátima; Prado, Christiane Lanatovits; Mello Junior, Wilson A.

2015-01-01

The aim of this study was to analyze the correlation between deficits in the isokinetic peak torque of the knee extensors and flexors with hop tests, postoperative knee laxity and functional scores in normal and ACL- reconstructed subjects with patellar tendon and hamstring tendon autografts. Methods: Sixty male subjects were enrolled and subdivided into three groups: Twenty subjects without knee injuries (GC group) and two groups of 20 subjects submitted to ACL reconstruction with patellar tendon (GTP group) and hamstrings autograft (GTF group). Results: The results showed significant correlation between knee extensors peak torque and performance in the hop tests for GTF and GC groups. There are no significantly correlations between post op knee laxity and Lysholm score compared with the hop tests and peak torque deficits. Concerning the differences between groups, the GTP group showed greater peak torque deficits in knee extensors, worst Lysholm scores and higher percentage of individuals with lower limb symmetry index (ISM) < 90% in both hop tests when compared to the other two groups. Conclusion: It is not recommendable to use only one measurement instrument for the functional evaluation of ACL-reconstructed patients, because significant correlation between peak torque, subject's functional score, knee laxity and hop tests were not observed in all groups. PMID:26998464

Investigating the relationship between internal tibial torsion and medial collateral ligament injury in patients undergoing knee arthroscopy due to tears in the posterior one third of the medial meniscus.

PubMed

Guler, Olcay; Isyar, Mehmet; Karataş, Dilek; Ormeci, Tugrul; Cerci, Halis; Mahirogulları, Mahir

2016-08-01

To evaluate the relationship between medial collateral ligament (MCL) injury and degree of internal tibial torsion in patients who had undergone arthroscopic resection due to tears in the posterior one third of the medial meniscus. Seventy-one patients were allocated into two groups with respect to foot femur angle (FFA) and transmalleolar angle (TMA) (Group 1 31 patients with FFA<8° and Group 2 40 patients with FFA≥8°). The groups were compared in terms of valgus instability, Lysholm score, magnetic resonance view, FFA, and TMA, both before and after the operation. Lysholm scores were higher in Group 2 at both postoperative week 1 (p<0.001) and month 1 (p=0.045) relative to Group 1. Preoperative cartilage injury was encountered more frequently in Group 1 (p=0.037) than in Group 2. MCL injury was detected more frequently in Group 1 compared to Group 2 postoperatively at week 1 (p=0.001). We conclude that FFA and TFA, indicators of internal tibial torsion, may serve as markers for foreseeing clinical improvement and complications following arthroscopic surgery. level III retrospective comparative study. Copyright © 2015 Elsevier B.V. All rights reserved.

The effect and safety of highly standardized Ginger (Zingiber officinale) and Echinacea (Echinacea angustifolia) extract supplementation on inflammation and chronic pain in NSAIDs poor responders. A pilot study in subjects with knee arthrosis.

PubMed

Rondanelli, Mariangela; Riva, Antonella; Morazzoni, Paolo; Allegrini, Pietro; Faliva, Milena Anna; Naso, Maurizio; Miccono, Alessandra; Peroni, Gabriella; Degli Agosti, Irene; Perna, Simone

2017-06-01

The study aimed to evaluate the effect of Zingiber officinale and Echinacea angustifolia extract supplementation (25 mg of ginger and 5 mg of Echinacea) for 30 days on inflammation and chronic pain in knee osteoarthritis (OA). Consecutive nonsteroidal anti-inflammatory-drugs (NSAIDs) poor responders with chronic inflammation and pain due to knee arthrosis were assessed (15 subjects, age: 67.2 ± 7.9, body mass index: 30.6 ± 7.1, men/women:2/13). The primary endpoint was to determine pain improvement from baseline to Day 30 by Tegner Lysholm Knee Scoring. The secondary endpoints were the assessment of Visual Analog Scale for Pain, health-related quality of life, by the ShortForm36 (SF-36), anthropometric parameters, hydration. After supplementation, a significant improvement of 12.27 points was observed for Lysholm scale score (p < 0.05), SF-36 (p < 0.05), and a decrease in -0.52 cm in knee circumference (left) (p < 0.01). This pilot study provides feasibility and safety data for the use of highly standardised ginger and Echinacea extract supplementation in people with knee OA.

A stand-alone lateral condyle-elevating trochlear osteotomy leads to high residual instability but no excessive increase in patellofemoral osteoarthritis at 12-year follow-up.

PubMed

Tigchelaar, S; van Sambeeck, J; Koeter, S; van Kampen, A

2018-04-01

Trochlear osteotomy is a rarely performed procedure, only indicated in selected cases. Due to its nature, it can potentially lead to cartilage damage and subsequent early osteoarthritis. Satisfactory short-term results from lateral condyle-elevating osteotomy have previously been reported. The long-term effects of this procedure on clinical outcomes, patellar stability and radiological osteoarthritis are reported here. Sixteen patients (19 knees) with patellar instability due to trochlear dysplasia were included. An isolated lateral condyle-elevating trochlear osteotomy was performed between 1995 and 2002. All patients were re-examined at a minimum of 12-year follow-up. Three patients were lost to follow-up, and one patient underwent a patellofemoral arthroplasty 3 years post-operatively due to progressive osteoarthritis. Complete follow-up was therefore available in 12 patients (15 knees). Recurrent instability, VAS pain, WOMAC, Lysholm and Kujala scores were used as outcome measures. Radiological osteoarthritis was recorded using the Iwano and the Kellgren-Lawrence classifications. A repeated-measures ANOVA was used to test for repeated measures (pre-operative, 2-year and final follow-up), and Spearman's correlation coefficient for relationships between osteoarthritis and functional scores. At final follow-up, VAS pain showed a non-significant improvement from 52 to 25, and the median Kujala score was 78. Median Lysholm (54-71, p = 0.021) and WOMAC (78-96, p = 0.021) scores improved from the pre-operative assessment to final follow-up. There was no significant difference observed between clinical scores at the 2-year and final follow-up. Residual patellar instability was reported in four out of 15 knees. Three knees showed no patellofemoral osteoarthritis, eight knees had grade 1 and four knees grade 2. No correlation between VAS pain, Lysholm, WOMAC or Kujala scores and osteoarthritis could be identified (n.s.). A stand-alone lateral condyle-elevating trochleoplasty results in the significant improvement of most clinical scores; however, when performed as a stand-alone procedure, it leads to a high percentage of residual instability. In contrast to general belief, the development of patellofemoral osteoarthritis at 12-year follow-up did not exceed the findings from other trochleoplasty case series. Case series with no comparison group, Level IV.

Graft extrusion in both the coronal and sagittal planes is greater after medial compared with lateral meniscus allograft transplantation but is unrelated to early clinical outcomes.

PubMed

Lee, Dae-Hee; Lee, Chang-Rack; Jeon, Jin-Ho; Kim, Kyung-Ah; Bin, Seong-Il

2015-01-01

Graft extrusion after meniscus allograft transplantation (MAT) may be affected by horn fixation, which differs between medial and lateral MAT. Few studies have compared graft extrusion, especially sagittal extrusion, after medial and lateral MAT. In patients undergoing medial and lateral MAT, graft extrusion is likely similar and not correlated with postoperative Lysholm scores. Cohort study; Level of evidence, 2. Meniscus graft extrusion in the coronal and sagittal planes was compared in 51 knees undergoing medial MAT and 84 undergoing lateral MAT. Distances from the anterior and posterior articular cartilage margins to the anterior (anterior cartilage meniscus distance [ACMD]) and posterior (posterior cartilage meniscus distance [PCMD]) horns, respectively, were assessed on immediate postoperative magnetic resonance imaging and compared in patients undergoing medial and lateral MAT. Correlations between coronal and sagittal graft extrusion and between extrusion and the Lysholm score were compared in the 2 groups. In the coronal plane, mean absolute (4.3 vs 2.7 mm, respectively; P<.001) and relative (39% vs 21%, respectively; P<.001) graft extrusions were significantly greater for medial than lateral MAT. In the sagittal plane, mean absolute and relative ACMD and PCMD values were significantly greater for medial than lateral MAT (P<.001 each). For both medial and lateral MAT, mean absolute and relative ACMDs were significantly larger than PCMDs (P<.001 each). Graft extrusion>3 mm in the coronal plane was significantly more frequent in the medial (78%) than in the lateral (35%) MAT group. In the sagittal plane, the frequencies of ACMDs (72% vs 39%, respectively) and PCMDs (23% vs 4%, respectively) >3 mm were also significantly greater in the medial than in the lateral MAT group. Coronal and sagittal extrusions were not correlated with postoperative Lysholm scores for both medial and lateral MAT. The amount and incidence of graft extrusion were greater after medial than lateral MAT in both the coronal and sagittal planes. In the sagittal plane, graft extrusion was greater and more frequent on the anterior than the posterior horn in both medial and lateral MAT. However, graft extrusion was not correlated with early clinical outcomes after both medial and lateral MAT. © 2014 The Author(s).

Trochleoplasty as a Solitary Treatment for Recurrent Patellar Dislocation Results in Good Clinical Outcome in Adolescents.

PubMed

Camathias, Carlo; Studer, Katrin; Kiapour, Ata; Rutz, Erich; Vavken, Patrick

2016-11-01

The essential static patellar stabilizer is a normal-shaped trochlear groove. A dysplastic groove destabilizes the patella. Trochleoplasty approaches this underlying condition and reshapes the trochlea. However, studies have reported on trochleoplasty for revision cases or as accompanied by other interventions. The effect of trochleoplasty alone remains unexplained. To introduce trochleoplasty as a stand-alone treatment for recurrent patellar dislocation and to compare its pre- to postoperative functional and clinical variables. Case series; Level of evidence, 4. A trochleoplasty was performed in 50 knees (27 right) in 44 patients (30 females; mean ± SD age, 15.6 ± 2.0 years). The indication for surgery was recurrent patellar dislocation not responding to nonoperative treatment (>6 months), with types B through D dysplasia and closed or closing physes in adolescents aged 10 to 20 years. Assessment included J-sign and apprehension test, Kujala and Lysholm scores, patients' subjective assessment and activity level according to the International Knee Documentation Committee questionnaire, and patients' overall satisfaction. The Caton-Deschamps ratio and the lateral condyle index were measured. Pre- versus postoperative values were compared with a paired Wilcoxon signed-rank test. The minimum follow-up was 24 months (33 ± 10.6 months). The Kujala score improved from 71 preoperatively to 92 postoperatively (P < .001) and the Lysholm score from 71 to 95 (P < .001). Patients' subjective assessment improved at the final follow-up as compared with that preoperatively (P < .001). Most patients enhanced their activity (P < .001), and their overall satisfaction increased postoperatively (P < .001). Preoperatively, there was a positive J-sign in 45 knees and a positive apprehension test in 41 knees. Both markers disappeared postoperatively in 39 and 33 knees, respectively, leaving 6 knees with a positive J-sign and 8 knees with a positive apprehension test (P < .001). One patella redislocated postoperatively after 38 months. Four patients required a single arthroscopic debridement. In this study, trochleoplasty as a solitary treatment for recurrent patellofemoral dislocations in patients with trochlear dysplasia resulted in good clinical outcomes if severe torsional and axial malalignment was excluded. Kujala and Lysholm scores increased postoperatively, as well as subjective International Knee Documentation Committee assessment of outcomes, activity level, and overall satisfaction. © 2016 The Author(s).

Increased Compliance With Supervised Rehabilitation Improves Functional Outcome and Return to Sport After Anterior Cruciate Ligament Reconstruction in Recreational Athletes

PubMed Central

Han, Fucai; Banerjee, Anirban; Shen, Liang; Krishna, Lingaraj

2015-01-01

Background: Successful return to sport is an important outcome measure after anterior cruciate ligament (ACL) reconstruction and a reason for patients’ decisions to elect surgery. Rehabilitation programs supervised by physical therapists are routinely prescribed after ACL reconstruction surgery. However, the added advantage of supervised physical therapy after ACL reconstruction is still debatable. Hypothesis: Attending more supervised physical therapy sessions after arthroscopic ACL reconstruction in recreational athletes increases their chance of successful return to sport. Study Design: Cohort study; Level of evidence, 3. Methods: The authors analyzed 93 recreational athletes who underwent arthroscopic ACL reconstruction. After arthroscopic single-bundle ACL reconstruction, patients were advised to attend 20 supervised physical therapy sessions. Patients’ demographics, surgical details, and outcome measures (Knee injury and Osteoarthritis Outcome Score [KOOS], Lysholm scale, and Short Form–36 Health Survey [SF-36]) were recorded presurgery and at 1-year follow-up. Ability to return to sports was documented through patients’ self-report. The attendance at physical therapy by each patient was obtained by examining database records and assessed as fully compliant (>15 sessions), moderately compliant (6-15 sessions), or noncompliant (<6 sessions). Results: Patients in the fully compliant group had significantly greater odds (odds ratio [OR], 18.5; 95% CI, 1.9-184.5; P = .013) of a successful return to sport as compared with the noncompliant group. Patients in the moderately compliant group also had greater odds of returning to sport as compared with the noncompliant group (OR, 4.2; 95% CI, 1.0-16.6; P = .043). Patients in the fully compliant group had significantly greater scores on the Lysholm (P < .001), KOOS Sports and Recreation subscale (P = .021), KOOS Symptoms subscale (P = .040), and SF-36 physical component summary (PCS) (P = .012) as compared with the noncompliant group. Moderately compliant patients had significantly greater scores on the Lysholm (P = .004), KOOS Sports and Recreation (P = .026), KOOS Symptoms (P = .041), KOOS Quality of Life (P = .022), and SF-36 PCS (P = .004) as compared with noncompliant patients. Conclusion: In recreational athletes, moderate to full compliance with a supervised physical therapy program predicts improved knee function and a greater chance of returning to sport 1 year after ACL reconstruction. PMID:26740958

Mucoid Degeneration of the Anterior Cruciate Ligament: Characterization of Natural History, Femoral Notch Width Index, and Patient Reported Outcome Measures.

PubMed

Hotchen, Andrew J; Demetriou, Charis; Edwards, Dennis; Melton, Joel T K

2018-06-13

The presentation and clinical course of mucoid degeneration of the anterior cruciate ligament (MD-ACL) are poorly documented within the literature. Subsequently, it is under-diagnosed and the optimal management strategy remains ill-defined. Here, we characterize the syndrome associated with MD-ACL and compare the natural clinical course with the outcomes of arthroscopic management. Thirty-one patients with radiological features of MD-ACL over a 2-year period had their clinical notes retrospectively reviewed. Seven patients underwent arthroscopic debridement of the ACL for MD. These were followed up for a minimum of 2 years and an average of 2.8 years from surgery. The remainder were managed conservatively ( n  = 24) and were followed up for a minimum of 2 years and an average of 4.0 years. The notch width index (NWI) and associated pathology was noted. Primary outcome measures were presence of knee pain and use of analgesia. Secondary outcome measures were the Oxford and Lysholm knee scores. The most commonly reported symptoms were posterior knee pain (77.4%) and limitation of terminal flexion (58.1%). All patients who underwent arthroscopic debridement were pain and analgesia free at follow-up. Of the patients who did not undergo arthroscopic surgery, three patients had knee replacement surgery and three were lost to follow-up. The remaining patients, 14/18 (77.8%), reported knee pain and regular analgesia use at follow-up, which was significantly more than the arthroscopic debridement group ( p  < 0.01). The knee scores were significantly better in the arthroscopic debridement group at follow-up (Oxford knee score: 45 vs 34; Lysholm: 92 vs 67; p  < 0.01). Furthermore, the postoperative improvement in the Oxford knee and Lysholm scores compared with preoperatively was 12.1 and 31.8 points, respectively ( p  < 0.01). The NWI was increased in patients with mild-to-severe osteoarthritis (0.266 vs 0.273; p  < 0.05). MD-ACL should be considered in patients who report posterior knee pain, limitation of terminal flexion, and it can be associated with other knee pathologies. MD-ACL can be successfully managed with arthroscopic radio frequency debulking with improvement in quality of life at follow-up. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

[Effectiveness comparison of anatomical single-bundle and over-the-top single-bundle reconstruction of anterior cruciate ligament].

PubMed

Dong, Yu; Chen, Shiyi; Li, Yunxia; Chen, Jiwu; Hua, Yinghui

2011-08-01

To compare the effectiveness of anatomical single-bundle (ASB) and over-the-top single-bundle (OSB) reconstruction of the anterior cruciate ligament (ACL). Between January 2008 and June 2008, 64 patients with ACL injury underwent arthroscopic ACL reconstruction. ASB ACL reconstruction was performed in 28 cases (ASB group) and OSB ACL reconstruction in 36 cases (OSB group). There was no significant difference in gender, age, disease duration, International Knee Documentation Committee (IKDC) score, Lysholm score, and side-to-side difference between 2 groups (P > 0.05). All incisions healed by first intention; no infection or other complications occurred. All cases were followed up 20-24 months (mean, 21.5 months). There were significant differences in the IKDC score, Lysholm score, and the side-to-side difference between last follow-up and preoperation in 2 groups (P < 0.05), but there was no significant difference between 2 groups at last follow-up (P > 0.05). Significant differences were found in negative rate of the pivot shift test between last follow-up and preoperation in ASB group and between 2 groups at last follow-up (P < 0.05), but there was no significant difference between last follow-up and preoperation in OSB group (P > 0.05). The effectiveness of arthroscopic ASB ACL reconstruction is better than that of arthroscopic OSB ACL reconstruction, especially in controlling rotational stability.

Inpatient treatment effect and Minnesota Multiphasic Personality Inventory characteristics of motor vehicle collision injuries in a traditional korean medicine hospital: Retrospective chart review.

PubMed

Song, Min-Yeong; Jo, Hee-Guen; Sul, Jae-Uk; Kim, Seong-Tae; Bae, Kil-Joon; Kim, Tae-Gwang; Kim, Jae-Hong; Choi, Jin-Bong

2016-11-03

To examine the changes in pain, disability, and quality of life in motor vehicle collision injury (MVCI) patients after treatment with traditional Korean medicine (TKM), and to investigate the psychological characteristics of these patients. Forty-one patients with MVCI were treated with TKM including acupuncture, pharmacopuncture, moxibustion, cupping, herbal medication, chuna manual therapy, and physical therapy. Numeric Rating Scale (NRS), Medical Outcomes Study 36-Item Short Form Health Survey (SF-36), Neck Disability Index (NDI), Oswestry Disability Index (ODI), and Lysholm Knee Scoring Scale were assessed at admission and discharge. The Minnesota Multiphasic Personality Inventory (MMPI) was assessed at admission. After treatment, NRS scores for headache, cervical pain, and lumbar pain were significantly decreased (P<0.05); NDI, ODI scores were significantly decreased, and Lysholm score was signifificantly increased (P<0.05). The following SF-36 scores were signifificantly increased: physical and mental component summary, bodily pain, role-physical, role-emotional, social functioning, and mental health scores (all P<0.05). MMPI identifified 3-1 profifile conversion V shape. Treatment of MVCI with TKM provided effective management of complex symptoms such as pain, disability, and loss of quality of life. A comprehensive plan must be implemented for treatment and research in cases of MVCIs owing to the correlation between physical symptoms and psychological profifiles.

Translation and Validation of the Korean Version of the International Knee Documentation Committee Subjective Knee Form

PubMed Central

Kim, Jin Goo; Lee, Joong Yub; Seo, Seung Suk; Choi, Choong Hyeok; Lee, Myung Chul

2013-01-01

Purpose To perform a cross-cultural adaptation and to test the measurement properties of the Korean version of International Knee Documentation Committee (K-IKDC) Subjective Knee Form. Materials and Methods According to the guidelines for cross-cultural adaptation, translation and backward translation of the English version of the IKDC Subjective Knee Form were performed. After translation into the Korean version, 150 patients who had knee-related problems were asked to complete the K-IKDC, Lysholm score, and Short Form-36 (SF-36). Of these patients, 126 were retested 2 weeks later to evaluate test-retest reliability, and 104 were recruited 3 months later to evaluate responsiveness. Construct validity was analyzed by investigating the correlation with Lysholm score and SF-36; content validity was also evaluated. Standardized mean response was calculated for evaluating responsiveness. Results The test-retest reliability proved excellent with a high value for the intraclass correlation coefficient (r=0.94). The internal consistency was strong (Cronbach's α=0.91). Good content validity with absence of floor not ceiling effects and good convergent and divergent validity were observed. Moderate responsiveness was shown (standardized mean response=0.689). Conclusions The K-IKDC demonstrated good measurement properties. We suggest that this instrument is an excellent evaluation instrument that can be used for Korean patients with knee-related injuries. PMID:24032098

Half-peroneus-longus-tendon graft augmentation for unqualified hamstring tendon graft of anterior cruciate ligament reconstruction.

PubMed

Liu, Chung-Ting; Lu, Yung-Chang; Huang, Chang-Hung

2015-09-01

In some situations, harvested hamstring tendon grafts are not qualified for anterior cruciate ligament (ACL) reconstruction. This study aimed to present a reinforcing method with additional half peroneus longus tendon (half-PLT) graft augmentation. Eight cases underwent ACL reconstruction with unqualified hamstring tendon grafts (diameter <7 mm) and were salvaged by additional half-PLT graft augmentation. The pivot shift test and KT-1000 tests were performed 3 years after surgery. Functional evaluation of subjective International Knee Documentation Committee (IKDC) and Lysholm scores was also done. In addition, Foot and Ankle Disability Index (FADI) scores were used to evaluate the function of the ankle donor site. The diameter of unqualified four-strand hamstring tendon grafts was 6.2 mm on average (range, 6.0-6.5 mm). The average diameter of hamstring grafts with half-PLT augmentation was 9.6 mm (range, 9.5-10.0 mm). The pivot shift test was negative in all patients. No significant differences between normal and abnormal knees were found by KT-1000. The average IKDC score was 86.0 (range, 83 to 89), and the average Lysholm score was 84.4 (range, 80-90). The average FADI score for the donor sites of half-PLT was 135.8 (range, 134-136). Additional half-PLT can successfully and safely reinforce unqualified hamstring tendon grafts for ACL reconstruction.

Revision of anterior cruciate ligament reconstruction with allografts in patients younger than 40 years old: a 2 to 4 year results.

PubMed

Pascual-Garrido, Cecilia; Carbo, L; Makino, A

2014-05-01

The purpose of this study is first to report the outcomes, at 4 years follow-up, in revision ACL surgery using allografts in patients younger than 40 years old, and then compared soft tissue allografts to bone tendon allografts. This retrospective study included 47 patients who underwent ACL revision surgery with fresh-frozen allografts. Patellar tendon allograft or tibialis anterior allograft was used. Twenty-seven patients undergoing ACL revision with patellar tendon allograft were compared retrospectively with twenty-two patients undergoing the same procedure with soft tissue tibialis anterior allograft. Lysholm, IKDC, and KT-1000 values were obtained preoperatively and postoperatively. The average patient follow-up was 4.6 years (±2.5). The mean age at time of the revision was 34 years old (±6.3). Overall, patients reported the overall condition of their knee as excellent or good in 85% of the patients (10 excellent, 33 good). Based on their experience, 85% would have the surgery again if they had the same problem in the other knee. Both subgroups experienced significant improvement in Lysholm, IKDC, and KT-1000 values, with no difference found between groups at final follow-up. Revision ACL with allografts has excellent and good results in 85% of patients younger than 40 years old. No statistical difference was seen between soft tissue (tibialis anterior) and patellar tendon allograft. IV.

Clinical and arthroscopic outcome of single bundle anterior cruciate ligament reconstruction: Comparison of remnant preservation versus conventional technique.

PubMed

Choi, Sungwook; Kim, Myung-Ku; Kwon, Yong Suk; Kang, Hyunseong

2017-10-01

The purpose of this study was to compare the clinical outcomes and second-look arthroscopic findings of remnant preservation technique with those of conventional anterior cruciate ligament (ACL) reconstruction in single bundle ACL reconstructions. One hundred sixty two consecutive patients underwent ACL reconstruction by one surgeon, with 93 patients receiving remnant preservation technique (Group A) and 69 patients receiving conventional ACL reconstruction (Group B). The mean follow-up was 15months. Clinical outcomes were assessed using Lysholm scores and the International Knee Documentation Committee form (IKDC form) evaluation. Post-operative knee stability was evaluated through manual knee laxity evaluation, pivot-shift test, and a Telos device. Differences in post-operative stability (manual knee laxity, pivot shift test and Telos device) were not significant between the groups (p=0.681, p=0.610, p=0.696). And also no significant differences were noted with respect to the IKDC form and the latest Lysholm scores. But in the second-look arthroscopic findings, synovial coverage was confirmed to be excellent in 36% (22/61) of Group A patients and 23% (7/30) of Group B patients. ACL reconstruction with both techniques was found to result in acceptable stability, clinical outcomes and second-look arthroscopic findings. With regard to synovial coverage, the remnant reservation techniques were found to be superior to conventional ACL reconstruction. Level III, retrospective comparative study. Copyright © 2017 Elsevier B.V. All rights reserved.

Short term results of anterior cruciate ligament augmentation in professional and amateur athletes.

PubMed

Yazdi, Hamidreza; Torkaman, Ali; Ghahramani, Morteza; Moradi, Amin; Nazarian, Ara; Ghorbanhoseini, Mohammad

2017-06-01

Anterior cruciate ligament (ACL) reconstruction is a widely accepted procedure; however, controversies exist about ACL augmentation. The purpose of this study was to assess the clinical outcomes of ACL augmentation in professional and amateur athletes with isolated single bundle ACL tears. A consecutive series of professional and amateur athletes with partial ACL tears who underwent selective bundle reconstruction were analyzed. Stability was assessed with the Lachman test, anterior-drawer test, pivot-shift test and KT-1000 arthrometer. Functional assessment was performed using the subjective Lysholm questionnaire. Fifty-six patients were enrolled. The mean follow-up period was 19.3 months. All patients had posterolateral bundle (PLB) tears, and no anteromedial bundle (AMB) tears were found. The Lysholm score improved significantly from 78 (SD = 2.69) preoperatively to 96 (SD = 3.41) postoperatively (P value <0.0001). The pivot-shift test, Lachman test and anterior-drawer test results were negative in all cases postoperatively. Anterior tibial translation from neutral was 4.9 mm (SD = 2.7) preoperatively, and decreased significantly to 2.1 (SD = 0.6) postoperatively, measured with a KT-1000 arthrometer (P value <0.00001). In this study, we showed that ACL augmentation had good results in symptomatic professional and amateur athletes, and although further studies are needed to investigate long-term results, we recommend this surgery for all symptomatic athletic patients, especially those who would like to maintain an active lifestyle. Level of evidence IV.

Posterior Meniscal Root Repairs: Outcomes of an Anatomic Transtibial Pull-Out Technique.

PubMed

LaPrade, Robert F; Matheny, Lauren M; Moulton, Samuel G; James, Evan W; Dean, Chase S

2017-03-01

Outcomes after transtibial pull-out repair for posterior meniscal root tears remain underreported, and factors that may affect outcomes are unknown. Purpose/Hypothesis: The purpose of this study was to compare patient-centered outcomes after transtibial pull-out repair for posterior root tears in patients <50 and ≥50 years of age. We hypothesized that improvement in function and activity level at minimum 2-year follow-up would be similar among patients <50 years of age compared with patients ≥50 years and among patients undergoing medial versus lateral root repairs. Cohort study; Level of evidence, 3. Inclusion criteria were patients aged 18 years or older who underwent anatomic transtibial pull-out repair of the medial or lateral posterior meniscus root by a single surgeon. All patients were identified from a data registry consisting of prospectively collected data in a consecutive series. Cohorts were analyzed by age (<50 years [n = 35] vs ≥50 years [n = 15]) and laterality (lateral [n = 15] vs medial [n = 35]). Patients completed a subjective questionnaire preoperatively and at minimum of 2 years postoperatively (Lysholm, Tegner, Western Ontario and McMaster Universities Osteoarthritis Index [WOMAC], 12-Item Short Form Health Survey [SF-12], and patient satisfaction with outcome). Failure was defined as revision meniscal root repair or partial meniscectomy. The analysis included 50 knees in 49 patients (16 females, 33 males; mean age, 38.3 years; mean body mass index, 26.6). Of the 50 knees, 45 were available for analysis. Three of 45 (6.7%) required revision surgery. All failures were in patients <50 years old, and all failures underwent medial root repair. No significant difference in failure was found based on age ( P=.541) or laterality ( P = .544). For age cohorts, Lysholm and WOMAC scores demonstrated significant postoperative improvement. For laterality cohorts, all functional scores significantly improved postoperatively. No significant difference was noted in postoperative Lysholm, WOMAC, SF-12, Tegner, or patient satisfaction scores for the age cohort or the laterality cohort. Outcomes after posterior meniscal root repair significantly improved postoperatively and patient satisfaction was high, regardless of age or meniscal laterality. Patients <50 years had outcomes similar to those of patients ≥50 years, as did patients who underwent medial versus lateral root repair. Transtibial double-tunnel pull-out meniscal root repair provided improvement in function, pain, and activity level, which may aid in delayed progression of knee osteoarthritis.

Multiligament Knee Injuries in Older Adolescents: A 2-Year Minimum Follow-up Study

PubMed Central

Godin, Jonathan A.; Cinque, Mark E.; Pogorzelski, Jonas; Moatshe, Gilbert; Chahla, Jorge; LaPrade, Robert F.

2017-01-01

Background: Multiligament knee injuries cause significant functional impairment. Adults undergoing anatomic reconstruction of multiligament knee injuries have excellent outcomes postoperatively. However, less is known about the outcomes in adolescent patients following multiligament reconstruction. Purpose/Hypothesis: We aimed to assess patient outcomes and failure rates following unstaged multiligament reconstruction in an adolescent population at a minimum 2-year follow-up. We hypothesized that outcomes of multiligament reconstruction in these patients would be comparable to previously reported outcomes in the adult population. Study Design: Case series; Level of evidence, 4. Methods: The study included patients who had undergone multiligament knee reconstruction at 19 years of age or younger and had at least 2 years of follow-up. All procedures were performed by the same surgeon. Exclusion criteria included patient age 14 years or younger at the time of surgery, open physes, prior ipsilateral meniscal or knee ligament surgery, or a tibial plateau fracture at the time of injury. Multiligament reconstruction was defined as a reconstruction of at least 1 cruciate ligament and at least 1 component of the posterolateral corner or the medial knee. Patients were evaluated according to Lysholm score, Tegner score, Short Form–12 physical component summary (SF-12 PCS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, and postoperative patient satisfaction. Results: Twenty patients (mean age, 17.7 years; mean follow-up, 37.1 months) were included in this study. No patient required additional ligament surgery after the index surgery because of graft failure. The median preoperative Lysholm score was 49.5 (range, 18-90), and the median postoperative Lysholm score was 86 (range, 44-100) (P < .001). The median preoperative Tegner activity score was 2 (range, 0-9), and the median postoperative Tegner activity score was 6 (range, 2-10) (P = .012). The median SF-12 PCS improved from 40.5 preoperatively to a median of 56.1 postoperatively (P < .001). WOMAC total score improved from a median of 26.5 preoperatively to a median of 2 postoperatively (P < .001). Median postoperative patient satisfaction was 10 (range, 5-10). Conclusion: Single-stage multiligament knee reconstruction is a reliable procedure that improves knee function at 2-year follow-up in adolescent patients. Patient satisfaction was excellent, but longer follow-up in a larger series of patients is required to determine the long-term benefits of multiligament reconstruction in this patient population. PMID:28975131

Clinical and radiographic outcomes of medial open-wedge high tibial osteotomy with Anthony-K plate: prospective minimum five year follow-up data.

PubMed

Altay, Mehmet Akif; Ertürk, Cemil; Altay, Nuray; Mercan, Ahmet Şükrü; Sipahioğlu, Serkan; Kalender, Ali Murat; Işıkan, Uğur Erdem

2016-07-01

The purpose of this study was to prospectively evaluate the clinical and radiographic outcomes, and complication rates, after a minimum of five years of follow-up after medial open wedge high tibial osteotomy (MOWHTO) using an Anthony-K plate. MOWHTO was performed on 35 knees of 34 consecutive patients. A visual analogue scale (VAS), and Western Ontario and McMaster University Osteoarthritis (WOMAC) and Lysholm scores, were used in clinical evaluation. Upon radiographic assessment, alignment was expressed as the femorotibial angle (FTA). The posterior tibial slope (PTS) and the Insall-Salvati Index (ISI) were also measured. VAS, WOMAC, and Lysholm scores improved significantly upon follow-up (p < 0.001 for all). The overall mean FTA was 4.68 ± 4.39° varus pre-operatively; at the last post-operative follow-up, the value was 8.43 ± 2.02° valgus. The mean correction angle was 13.1 ± 2.7°. A significant increase in PTS was evident (p < 0.01), as was a significant decrease in the ISI (p < 0.01). The overall complication rate was 8.6 %. The Anthony-K plate affords accurate correction, initially stabilises the osteotomy after surgery, and maintains such stability until the osteotomy gap is completely healed, without correction loss. The plate survival rate was 97.2 % after a minimum of five years of follow-up. The plate increased the PTS, as do other medial osteotomy fixation plates.

Relationship between patellar mobility and patellofemoral joint cartilage degeneration after anterior cruciate ligament reconstruction.

PubMed

Ota, Susumu; Kurokouchi, Kazutoshi; Takahashi, Shigeo; Yoda, Masaki; Yamamoto, Ryuichiro; Sakai, Tadahiro

2017-11-01

Patellofemoral cartilage degeneration is a potential complication of anterior cruciate ligament reconstruction (ACLR) surgery. Hypomobility of the patella in the coronal plane is often observed after ACLR. Few studies, however, have examined the relationship between cartilage degeneration in the patellofemoral joint and mobility after ACLR. The present study investigated 1) the coronal mobility of the patella after ACLR, 2) the relationship between patellar mobility and cartilage degeneration of the patellofemoral joint, and 3) the relationship between patellar mobility and knee joint function after ACLR. Forty patients who underwent medial hamstring-based ACLR participated in the study. Lateral and medial patellar displacements were assessed with a modified patellofemoral arthrometer, and the absolute values of the displacements were normalized to patient height. The International Cartilage Repair Society (ICRS) cartilage injury classification of the patellar and femoral (trochlear) surfaces, and the Lysholm Knee Scoring Scale were used to evaluate knee function. Lateral and medial patellar displacements were reduced compared with the non-operated knee at the second-look arthroscopy and bone staple extraction operation (second operation; 24.4 ± 7.9 months after ACLR, P<0.01). The ICRS grades of the patellofemoral joint (patella and trochlea) were significantly worse than those pre-ACLR. Neither lateral nor medial patellar mobility, however, were significantly correlated with the ICRS grade or the Lysholm score. Although patellar mobility at approximately 2 years after ACLR was decreased compared to the non-operated knee, small displacement of the patella was not related to cartilage degeneration or knee joint function at the time of the second operation.

Return to sports and functional results after revision anterior cruciate ligament reconstruction by fascia lata autograft.

PubMed

Mirouse, G; Rousseau, R; Casabianca, L; Ettori, M A; Granger, B; Pascal-Moussellard, H; Khiami, F

2016-11-01

The surgical revision rate following anterior cruciate ligament (ACL) surgery is 3% at 2 years and 4% at 5 years. Revision ACL surgery raises the question of the type of graft to be used. The present study assessed return to sports and functional results after revision ACL reconstruction by fascia lata graft. The hypothesis was that fascia lata provides a reliable graft in revision ACL surgery. A single-center retrospective continuous study included 30 sports players with a mean age of 26.8±8 years undergoing surgical revision for iterative ACL tear between 2004 and 2013. Multi-ligament lesions were excluded. Type and level of sports activity were assessed preoperatively, after primary surgery and at end of follow-up. Clinical assessment used subjective IKDC, Lysholm and KOOS scores. At a mean 4.6±1.6 years' follow-up, all patients had resumed sport activity, but only 12 with the same sport at the same level. Median subjective IKDC score increased from 57 [54.3; 58.5] preoperatively to 82 [68.3; 90] at last follow-up, and Lysholm score from 46 [42.3; 51] to 90.5 [80.8; 96.8]; KOOS score at last follow-up was 94.7 [83; 100]. Functional results in revision ACL reconstruction by fascia lata graft were satisfactory, with similar return-to-sports rates as with other techniques. Fascia lata provides a reliable graft in revision ACL surgery. IV, retrospective study. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Effects on proprioception by Kinesio taping of the knee after anterior cruciate ligament rupture.

PubMed

Bischoff, Lars; Babisch, Christian; Babisch, Jürgen; Layher, Frank; Sander, Klaus; Matziolis, Georg; Pietsch, Stefan; Röhner, Eric

2018-03-10

The use of Kinesio tape (KT) to improve proprioception is a matter of considerable debate. In comparison, the rupture of the anterior cruciate ligament is a sufficiently well-investigated injury with a proven compromise of proprioception. The objective of the present study was to assess a supportive effect on proprioception after KT application, taking the anterior cruciate ligament (ACL) rupture as an example. Forty-eight patients who had suffered an ACL rupture, confirmed clinically and by magnetic resonance imaging, and who were treated conservatively or were awaiting surgery were included in this study. In all patients, a gait analysis was performed on the affected leg before and after KT application. In addition, the IKDC score, the Lysholm score, stability using the Rolimeter, and the angle reproduction test were determined. Thirty-nine men and nine women who had had an ACL rupture for at least 3 weeks were included in the study. Significant improvements were achieved on the affected knee joint for the gait analysis parameters touchdown and unrolling, cadence, stability and stance phase as well as an extension of the hip joint. The Lysholm score improved from 79.3 to 85.8 (p < 0.001) and the IKDC score from 60.2 to 71.3 points (p < 0.001). Significant improvements were achieved in the Rolimeter and angle reproduction test. The use of KT has a positive effect on proprioception in patients with an anterior cruciate ligament rupture. Therefore, the application may improve gait pattern as well as the subjective function of the affected knee joint.

Functional results from reconstruction of the anterior cruciate ligament using the central third of the patellar ligament and flexor tendons☆

PubMed Central

de Souza Leao, Marcos George; Pampolha, Abelardo Gautama Moreira; Orlando Junior, Nilton

2015-01-01

Objectives To evaluate knee function in patients undergoing reconstruction of the anterior cruciate ligament (ACL) using the central third of the patellar ligament or the medial flexor tendons of the knee, i.e. quadruple ligaments from the semitendinosus and gracilis (ST-G), by means of the Knee Society Score (KSS) and the Lysholm scale. Methods This was a randomized prospective longitudinal study on 40 patients who underwent arthroscopic ACL reconstruction between September 2013 and August 2014. They comprised 37 males and three females, with ages ranging from 16 to 52 years. The patients were numbered randomly from 1 to 40: the even numbers underwent surgical correction using the ST-G tendons and the odd numbers, using the patellar tendon. Functional evaluations were made using the KSS and Lysholm scale, applied in the evening before the surgical procedure and six months after the operation. Results From the statistical analysis, it could be seen that the patients’ functional capacity was significantly greater after the operation than before the operation. There was strong evidence that the two forms of therapy had similar results (p = >0.05), in all the comparisons. Conclusions The results from the ACL reconstructions were similar with regard to functional recovery of the knee and improvement of quality of life, independent of the type of graft. It was not possible to identify the best method of surgical treatment. The surgeon's clinical and technical experience and the patient are the factors that determine the choice of graft type for use in ACL surgery. PMID:27218084

The percutaneous pie-crusting medial release during arthroscopic procedures of the medial meniscus does neither affect valgus laxity nor clinical outcome.

PubMed

Jeon, Sang-Woo; Jung, Min; Chun, Yong-Min; Lee, Su-Keon; Jung, Woo Seok; Choi, Chong Hyuk; Kim, Sung-Jae; Kim, Sung-Hwan

2017-12-28

To analyze the effect of percutaneous pie-crusting medial release on valgus laxity before and after surgery and on clinical outcomes. Eight-hundred fourteen consecutive patients who underwent an arthroscopic procedure for the medial compartment of the knee were evaluated retrospectively. Sex, age, type of operation (meniscectomy, meniscal repair, and posterior root repair), type of accompanying surgery (none, cartilage procedure, ligament procedure and osteotomy) were documented. Sixty-four patients who underwent percutaneous pie-crusting medial release (release group) and 64 who did not undergo medial release (non-release group) were matched using the propensity score method. Each patient was evaluated for the following variables: degree of valgus laxity on stress radiographs, Lysholm knee score, visual analog scale score, and International Knee Documentation Committee knee score and grade. At the 24-month follow-up, no significant increase in side-to-side differences in the valgus gap was observed in comparison to the preoperative value in the release group [preoperative, - 0.1 ± 1.3 mm; follow-up, - 0.1 ± 1.4 mm; (n.s.)]. The follow-up Lysholm score, visual analog scale score and International Knee Documentation Committee knee score and grade were similar between the two groups. Percutaneous pie-crusting medial release is an additional procedure that can be performed during arthroscopic surgery for patients with a narrow medial joint space of the knee. Percutaneous pie-crusting medial release reduces iatrogenic injury to the cartilage and does not produce any residual valgus laxity of the knee. IV.

Second-look arthroscopic assessment and clinical results of modified pull-out suture for posterior root tear of the medial meniscus.

PubMed

Cho, Jin-Ho; Song, Jae-Gwang

2014-06-01

To identify the structural integrity of the healing site after arthroscopic repair of a posterior root tear of the medial meniscus by second-look arthroscopy and to determine the clinical relevance of the findings. From January 2005 to December 2010, 20 consecutive patients underwent arthroscopic modified pull-out suture repair for a posterior root tear of the medial meniscus. Thirteen patients were available for second-look arthroscopic evaluation. The healing status of the medial meniscus was classified as complete healing, lax healing, scar tissue healing, and failed healing. We evaluated the correlation between the clinical symptoms and second-look arthroscopic findings. Clinical evaluation was based on the Lysholm knee scores and Hospital for Special Surgery (HSS) scores. There were 4 cases of complete healing, 4 lax healing, 4 scar tissue healing, and 1 failed healing. The healing status of the repaired meniscus appeared to be related to the clinical symptoms. Patients who achieved complete tissue healing had no complaint. The healing status exhibited no relationship with age, mechanical axis, degree of subluxation, and symptom duration. The mean Lysholm score improved from 34.7 preoperatively to 75.6 at follow-up and the mean HSS score also significantly increased from 33.5 to 82.2. We achieved 4 complete and 8 partial healing (lax or scar) of the medial meniscus in this retrospective case series of posterior horn meniscus root repairs performed by 1 surgeon. Further research is needed to clarify why all patients showed clinical improvement despite findings of partial healing on second-look arthroscopy.

Arthroscopic medial meniscal repair with or without concurrent anterior cruciate ligament reconstruction: A subgroup analysis.

PubMed

Uzun, Erdal; Misir, Abdulhamit; Kizkapan, Turan Bilge; Ozcamdalli, Mustafa; Akkurt, Soner; Guney, Ahmet

2018-01-01

There are few large-scale, long-term studies comparing medial meniscal repairs with or without concurrent anterior cruciate ligament (ACL) reconstruction. A total of 140 patients who underwent arthroscopic medial meniscal repair were divided into two groups: Group A, meniscus repair only and Group B, meniscus repair with concurrent ACL reconstruction. Clinical assessments in- cluded physical examination findings, Lysholm score, and the International Knee Documentation Committee (IKDC) form. Barret criteria were used for the clinical assessment of healing status. Magnetic resonance imaging (MRI)was obtained to confirmhealing and failure. Subgroups of participants were compared in terms of suture technique, type of tear, and location of tear. KT-2000 arthrometer testing was used for objective evaluation of anterior-posterior knee movement. Mean follow-up duration was 61 (34-85) months. Clinical outcomes in both groups were significantly improved compared to baseline (P=0.001 vs. P=0.001); however, there was no significant between-group difference in postoperative Lysholm and IKDC scores (P=0.830). The outcomes of three participants (seven percent) in Group A and 11 (11.3%) in Group B were considered as treatment failures (P=0.55). Red-red zone tears had higher scores. Mean postoperative KT2000 arthrometer values of failed participants in Groups A and B were 4.66mm (range, four to six) and 5.2mm (range, two to seven), respectively. Concurrentmedialmeniscus repair and ACL reconstruction did not have clinical superiority over meniscus repair alone. Repairs in the red-red zone appeared to be associated with better outcomes. Copyright © 2017 Elsevier B.V. All rights reserved.

[Arthroscopic repair of meniscus injury with Fast-fix under local anesthesia].

PubMed

Wang, Jiang-tao; Liu, Yu-jie; Wang, Jun-liang; Qu, Feng; Yuan, Bang-tuo; Zhao, Gang; Shen, Xue-zhen; Zhu, Juan-li; Liu, Yang

2014-08-01

To evaluate the clinical outcome of arthroscopic repair method of meniscus injury with Fast-fix under local anesthesia. From October 2005 to September 2012,106 patients with meniscus injuries admitted into our - hospital were studied, including 74 males and 32 females, ranging in age from 13 to 71 years old, averaged 27.6 years old. The duration of the disease ranged from 15 days to 5 years. The main clinical manifestations included knee joint pain after exercise, joint locking, pressing pain of knee joint and positive McMurray signs. The MRI showed meniscus tear or degeneration. Arthroscopic repairing surgeries were performed with Fast-fix under local anesthesia. Each patient was assessed with VAS pain evaluation and Lysholm knee-joint score system before and after operation. All the patients were followed up more than 1 year. One hundred and 2 patients were followed up by recording subjective symptoms, clinical examinations and questions naires for an average of 2.6 years (ranged, 1.1 to 8 years), and 4 patients lost follow-up. All the 102 patients had no anesthetic complications. Ninety-six patients had normal subjective symptom and clinical examinations. Four patients had a mild ache with activities,2 patients had moderate pain after activities with joint space pressing pain. VAS pain evaluation and Lysholm knee-joint score after operation both were much better than that before operation. onclusion: Local anesthesia can provide nice circumstances for surgeries. Arthroscopic repair using Fast-fix is an idea method for meniscus injury, especially for the posterior horn tear of medial meniscus, which is simple and convenient with less complications, and satisfactory results.

Medical image analysis of knee joint lipoma arborescens and arthroscopic treatment.

PubMed

Zhu, Guangyu; Tian, Xiangdong; Du, Dongfeng; Lei, Ming; Guan, Lei; Wang, Jian; Tan, Yetong; Yang, Chen; Zheng, Xinxin

2018-06-01

Arthroscopy is a minimally invasive surgical procedure on a joint in which examination and treatment of knee damage is performed using a surgical device known as the arthroscope. Lipoma arborescens (LA), an infrequent intra-articular lesion, originates from mature adipose cells under subsynovial tissue. The synovial membrane is pale yellow with large villous projections. It is caused by various underlying factors. We found many patients with LA and processed them appropriately.The research was implemented to investigate therapeutic effect of semi-automated arthroscopic diagnosis and treatment for knee joint. We used the Stryker arthroscopic in surgery that is 4 mm in diameter with angle at 30°. Patients were chosen by biomechanical analysis and scanning mode. All of the patients underwent radiographic imaging examination, Magnetic Resonance Imaging (MRI), Lysholm Score and Visual Analogue Scale (VAS). Arthroscopic limited synovectomy was carried out on these patients. The wound of all patients healed up. The content of follow-up includes: chief complaints, range of motion of knee joint, Visual Analogue Scale (VAS) and Lysholm score. No swollen nor effusion of the infected knee was found in all patients during the follow-up. The postoperative symptom was markedly alleviated in fourteen patients and partially alleviated in one. All patients were satisfied with the therapeutic effect. We performed biomechanical analysis based on knee slight flexion and extension. Arthroscopy is an endoscope for the diagnosis and treatment of joint diseases. Semi-automated arthroscopic debridement is good for early and mid-term osteoarthritis with Lipoma arborescens. Copyright © 2018. Published by Elsevier Ltd.

Complex Meniscus Tears Treated with Collagen Matrix Wrapping and Bone Marrow Blood Injection

PubMed Central

Piontek, Tomasz; Ciemniewska-Gorzela, Kinga; Naczk, Jakub; Jakob, Roland; Szulc, Andrzej; Grygorowicz, Monika; Slomczykowski, Michal

2015-01-01

Objective To collect and analyze the 2-year follow-up clinical and MRI results of patients treated with an arthroscopic technique of collagen membrane-based meniscus repair. Design 53 consecutive patients with combined (horizontal and radial or longitudinal component) and complex meniscal tears (tear extended through avascular zones or/and composed with two or more morphological tear pattern) were treated with an “all-inside” arthroscopic suture of meniscus and wrapping with a collagen membrane (Chondro-Gide) technique with bone marrow blood injection. The IKDC 2000 subjective score, IKDC 2000 clinical evaluation score, Lysholm score and Barret clinical criteria of meniscal healing were recorded. All patients were examinated by MRI 2 years postoperatively, using modified WORMS criteria for meniscal integrity. Results The 2 year follow-up was achieved in 50 cases. Of these, 2 patients were excluded from the evaluation due to incomplete data and 2 patients underwent partial meniscectomy and were classified as failures. In 46 patients (86.8% of the intended to treat cases), a statistically significant improvement in IKDC 2000 subjective, Lysholm scores and IKDC 2000 clinical assessment between preoperative and the 2-year follow-up time points were obsereved. Barret criteria demonstrated an improved clinical outcome between pre- and post-operative values. MRI revealed a non-homogeneous signal without meniscal tear (WORMS grade 1) in 76% of the operated menisci (13% WORMS grade 2). Conclusions The 2-year follow-up data demonstrate that this technique is safe and can offer an additional tool to save the meniscus in the patients otherwise scheduled for meniscal removal. Level of evidence IV PMID:27047635

Treatment of posterior cruciate ligament tibial avulsion by a minimally-invasive open posterior approach.

PubMed

Abdallah, Ahmed Abdelbadie; Arafa, Mohammed S

2017-07-01

To assess the surgical technique and report the outcomes following fixation of PCL bony avulsions through mini-invasive posterior knee approach as described by Burks and Schaffer. From June 2012 to July 2015, 27 patients enrolled in the study (21 males and 6 females). Fixation of tibial PCL avulsion fractures was done with one or two cannulated screws, or sutures through Burks and Schaffer's approach. The mean interval before surgery was 16days (1-70) .Patients was followed up for an average of 51 weeks. The outcome measures evaluated at final follow-up were (1) clinical stability as assessed by posterior drawer test, (2) radiologic union, (3) functional assessment by Lysholm score, and (4) gastrocnemius muscle strength as a measure of morbidity. Average operative time was 43min. Improvement of both subjective Lysholm score (mean 93) and objective stability testing by posterior drawer test (returns to normal in 81.1% of patients) at the final follow-up. Good radiographic union at average of 5.6 weeks. No morbidity of the gastrocnemius with few complications. The approach was fast and safe with excellent visualization. It allows surgeons to address other injuries in the same setting. It can be considered as a minimally-invasive open surgery without surgery-related morbidity. It is a reproducible technique that can be done at any trauma centre by surgeons with average experience. The subjective and objective results of the technique are excellent and comparable to the arthroscopic procedures that needs more specific centres with well-trained surgeons. Copyright © 2017 Elsevier Ltd. All rights reserved.

Transtibial vs anatomical single bundle technique for anterior cruciate ligament reconstruction: A Retrospective Cohort Study.

PubMed

Kilinc, Bekir Eray; Kara, Adnan; Oc, Yunus; Celik, Haluk; Camur, Savas; Bilgin, Emre; Erten, Yunus Turgay; Sahinkaya, Turker; Eren, Osman Tugrul

2016-05-01

Most of the ACL reconstruction is done with isometric single-bundle technique. Traditionally, surgeons were trained to use the transtibial technique (TT) for drilling the femoral tunnel. Our study compared the early postoperative period functional and clinical outcomes of patients who had ACL reconstruction with TT and patients who had ACL reconstruction with anatomical single-bundle technique (AT). Fifty-five patients who had ACL reconstruction and adequate follow-up between January 2010-December 2013 were included the study. Patients were grouped by their surgery technique. 28 patients included into anatomical single-bundle ACL reconstruction surgery group (group 1) and 27 patients were included into transtibial AC reconstruction group (group 2). Average age of patients in group 1 and group 2 was 28.3 ± 6, and 27.9 ± 6.4, respectively. Lachman and Pivot-shift tests were performed to patients. Laxity was measured by KT-1000 arthrometer test with 15, 20 and 30 pound power. All patients' muscle strength between both extremities were evaluated with Cybex II (Humac) at 60°/sec, 240°/sec frequencies with flexion and extension peak torque. The maximum force values of non-operated knee and the operated knee were compared to each other. Groups were evaluated by using International Knee Documentation Committee (IKDC) knee ligament healing Standard form, IKDC activity scale, modified Lysholm and Cincinnati evaluation forms. Return to work and exercise time of patients were compared. Functional and clinical outcomes of two groups were compared. NCSS 2007 and PASS 2008 Statistical Software programs were used for statistical analysis. There was no statistically significant difference between Lachman and Pivot-shift results (p > 0.01). Positive value of Pivot-shift test and incidence of anterior translation in Lachman test were higher in the patients who had TT. Lysholm activity level of patients who had TT, 33.3% (n = 9) were excellent, 51.9% (n = 14) were good and 14.8% (n = 4) were moderate; patients who had AT, 57.1% (n = 16) were excellent, 39.3% (n = 11) were good and 3.6% (n = 1) was good level. There was no statistically significant difference between Lysholm Activity level of the patients (p < 0.01). Lysholm Activity level of patients who had AT significantly higher than TT. There was no statistically significant difference between Modified Cincinnati activity level of the patients (p < 0.05). Modified Cincinnati activity level of patients who had AT were significantly higher than those had TT. There was no statistically significant difference between two groups with post treatment IKDC activity level (p < 0.01). Intense activity after treatment rate of patient who had AT was significantly higher than those had TT. There was statistically significant difference between Cybex extension-flexion 60 measurement and extension 240 measurement of the patients (p < 0.01). KT-1000 arthrometer test results with AT was better than the TT in antero-posterior translation of the knee kinematics at 20 and 30 pound of forces. Return to exercise time of patients who had TT was significantly higher than those had AT (p < 0.01). There was no statistically significant difference between return to work time of patients (p > 0.05). Single-bundle anatomic ACL reconstruction was better than the TT in term of clinical, functional, and laboratory results. We believe that AT ACL reconstruction will increase in use and traditional method which is TT ACL reconstruction surgery will decrease in the long term. Theoretically, anatomic relocation of the ACL can provide better knee kinematics. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

[Case-control study on the effect of core strength training on the function of anterior cruciate ligament reconstruction].

PubMed

Wu, Bin; Zheng, Song; Cai, Zhen-Hai; Wang, Yue-Li; Zeng, Ming

2017-08-25

To observe the effect of core strength training on knee joint function and postural stability after anterior cruciate ligament reconstruction (ACLR). A total of 80 ACLR patients were randomly allocated into conventional rehabilitation training group and core strength training group from May 2013 to May 2015 with 40 patients in each group. The patients in conventional rehabilitation training group underwent conventional ACLR rehabilitation training, in which 28 males and 12 females. The mean age was(30.5±5.2) years old(ranged, 22 to 42 years old). The mean BMI was(23.8±2.4) kg/m²(ranged, 18.2 to 25.9 kg/m²). Thirty patients had injuries on the dominant side and 10 patients had injuries on the non-dominant side. The core strength training group received conventional ACLR rehabilitation training and core strength training, in which 31 males and 9 females. The mean age was(31.1±4.8) years old(ranged, 21 to 45 years old). The mean BMI was(24.1±2.7) kg/m²(ranged, 18.5 to 26.1 kg/m²) . Twenty-seven patients had injuries on the dominant side and 13 patients had injuries on the non-dominant side. The Lysholm score, tibial anterior transition measured by KT-1000 before and after treatment, and the Star Excursion Balance Test results after treatment were compared between the two groups. Six months after rehabilitation training, the tibial anterior transition of the conventional rehabilitation training group and the core strength training group were(3.4±1.0) mm and(3.3±1.2) mm respectively, which were less than(12.1±1.8) mm and(12.5±2.0) mm before treatment. But there was no significant difference in anterior tibial translation between two groups( P >0.05). The Lysholm score of the conventional rehabilitation training group and the core strength training group were 91.8±4.3 and 92.1±3.9 individually, which were higher than 69.2±5.8 and 70.2±5.1 before treatment. But there was no significant difference in Lysholm score between two groups( P >0.05). Six months after rehabilitation training, the results of Star Excursion Balance Test showed the reach distance with the support in the injured side and healthy side in the core strength training group were greater than that of the conventional rehabilitation training group in the eight directions( P <0.05). The core strength training could improve the dynamic balance of ACLR patients.

Combined injuries of the medial collateral ligament and the anterior cruciate ligament. Early ACL reconstruction versus late ACL reconstruction.

PubMed

Petersen, W; Laprell, H

1999-01-01

Aim of this retrospective study is to evaluate the effect of acute and late anterior cruciate ligament (ACL) reconstruction in patients with a combined injury of the ACL and the medial collateral ligament (MCL). All MCL injuries were treated non-operatively. In 27 patients (group I) we performed early ACL reconstruction (within the first 3 weeks after injury). The postoperative rehabilitation protocol included brace treatment for all patients over a period of 6 weeks. In 37 patients we performed late ACL reconstruction (after a minimum of 10 weeks). In this group initial non-operative MCL treatment (6 weeks brace treatment) was followed by a period of accelerated rehabilitation. Patients with late ACL reconstruction had a lower rate of loss of motion after finishing the postoperative rehabilitation programme and a lower rate of re-arthroscopies for a loss of extension (group I: 4 patients, group II: 1 patient). The difference in the mean quadriceps muscle strength (group I: 83.3%, group II: 86.3%) was not statistically significant. After a mean interval of 22 months, we saw no difference in the frequency of anterior or medial instabilities or in the loss of motion. The Lysholm score was significantly better in the group with late ACL reconstruction (group I: 85.3, group II: 89.9). The position on the Tegner activity scale decreased in both groups, to 5.5 in group I (preoperatively: 6.0) and to 5.6 in group II (preoperatively: 5.9). With regard to the lower rate of motion complications in the early postoperative period, the lower rate of re-arthroscopies, and the significantly better results in the Lysholm score, we prefer late ACL reconstruction in the treatment of combined injuries of the ACL and the MCL.

Anteromedial portal versus transtibial drilling techniques in ACL reconstruction: a blinded cross-sectional study at two- to five-year follow-up

PubMed Central

Alentorn-Geli, Eduard; Samitier, Gonzalo; Álvarez, Pedro; Steinbacher, Gilbert

2010-01-01

Drilling of the femoral tunnel with the transtibial (TT) technique is widely used in bone-patellar tendon-bone (BPTB) anterior cruciate ligament (ACL) reconstruction. Recent studies suggest higher knee stability with the use of the anteromedial portal (AMP). The purpose of this study was to compare functional and clinical outcomes of BPTB ACL reconstruction using the TT or the AMP technique for drilling the femoral tunnel. All ACL reconstructions between January 2003 and April 2006 were approached for eligibility. Forty-seven patients met inclusion criteria (21 TT group and 26 AMP group). Blinded assessments of IKDC score, knee stability and range of motion, one-leg hop test, mid-quadriceps circumference, VAS for satisfaction with surgery, Lysholm and Tegner scores, and SF-12 questionnaire were obtained for both groups. Data on preoperative and postoperative surgical timing were retrospectively reviewed through the charts. The AMP group demonstrated a significantly lower recovery time from surgery to walking without crutches (p < 0.01), to return to normal life (p < 0.03), to return jogging (p < 0.03), to return training (p < 0.03), and to return to play (p < 0.03). Knee stability values measured with KT-1000, Lachman test, pivot-shift sign, and objective IKDC score assessments were significantly better for the AMP compared to TT group (p < 0.002, p < 0.03, p < 0.02, p < 0.015, respectively). No differences were found for VAS for satisfaction with surgery, Lysholm, Tegner, and SF-12 between both groups. The use of the AMP technique significantly improved the anterior-posterior and rotational knee stability, IKDC scores, and recovery time from surgery compared to the TT technique. PMID:20401753

Long-term absorption of beta-tricalcium phosphate poly-L-lactic acid interference screws.

PubMed

Barber, F Alan; Dockery, William D

2008-04-01

The purpose of this study was to evaluate the long-term in vivo degradation of biodegradable interference screws made of poly-L-lactic acid (PLLA) and beta-tricalcium phosphate (beta-TCP). Twenty patients undergoing patellar tendon autograft anterior cruciate ligament reconstruction fixed at both the femur and tibia with beta-TCP-PLLA screws at least 44 months earlier were evaluated by physical, radiographic, and computed tomography (CT) evaluations. This study was approved by the institutional review board. Lysholm, Tegner, Cincinnati, and International Knee Documentation Committee scores were also obtained. CT data were measured in Hounsfield units. We evaluated 13 male and 7 female patients at a mean of 50 months after surgery (range, 44 to 56 months). CT scans and radiographs showed the bone plug fused to the tunnel wall with no beta-TCP-PLLA screw remaining. The screws were replaced with clearly calcified non-trabecular material, denser than soft tissue. Osteoconductivity was present in 75% of the tunnels and complete in 10%. No positive pivot-shift tests were found. Lysholm, Tegner, and Cincinnati scores improved from 60.4, 3.7, and 53.3, respectively, preoperatively to 90.8, 5.8, and 86.4, respectively, at follow-up. The mean side-to-side difference determined by use of the KT arthrometer (MEDmetric, San Diego, CA) was 0.4 mm. The beta-TCP-PLLA interference screw (Bilok; ArthroCare, Sunnyvale, CA) completely degraded, and no remnant was present 4 years after insertion. Osteoconductivity was confirmed by CT scans at 75% of the screw sites and completely filled the site in 10%. The addition of beta-TCP to PLLA results in a biocomposite interference screw that is osteoconductive. Level IV, therapeutic case series.

Return to sporting activity after osteochondral autograft transplantation for Freiberg disease in young athletes.

PubMed

Ishimatsu, Tetsuro; Yoshimura, Ichiro; Kanazawa, Kazuki; Hagio, Tomonobu; Yamamoto, Takuaki

2017-07-01

Freiberg disease is defined as osteochondrosis of the metatarsal head and typically occurs in adolescents with sporting activity. This study aimed to evaluate the sporting activity of young athletes after osteochondral autograft transplantation (OAT) for Freiberg disease. OAT for Freiberg disease was conducted in 12 consecutive patients between August 2008 and November 2014. The present study evaluated 10 of these patients who both undertook sporting activity preoperatively and were teenagers at the time of surgery. Clinical evaluations were performed based on the Japanese Society for Surgery of the Foot lesser metatarsophalangeal-interphalangeal scale (JSSF scale) and range of motion (ROM) of the operated metatarsophalangeal joint preoperatively and at the final follow-up (mean 24.6 months). Whether patients were able to return to sporting activity and time until return to sporting activity were evaluated, including the Halasi score to reflect the level of sporting activity. Regarding symptoms at the donor knee, the Lysholm knee scale score was evaluated at the final follow-up. The mean JSSF scale showed a significant improvement at the final follow-up (p < 0.01). The mean ROM in extension and flexion improved at the final follow-up (p < 0.01, and p < 0.05, respectively). All patients were able to return to sporting activity at a mean time of 3.5 months postoperatively and the Halasi score showed no significant change. The mean Lysholm knee scale score was 97.9 (range 89-100) points at the final follow-up. All young athletes who underwent OAT for Freiberg disease achieved early return to almost equal sporting activity postoperatively and exhibited a significant improvement of the ROM of the metatarsophalangeal joint with almost no knee pain.

Horizontal versus vertical orientation of the loop for tension band wiring of transverse patella fractures.

PubMed

Lee, Sang Ki; Hwang, Yoon Sub; Choy, Won Sik

2014-03-01

Conventional operative treatments of patella fractures are frequently associated with implant failure or displacement. Recent biomechanical studies showed that the orientation of the wire loop and the site of the wire twist can affect the fixation strength. The purpose of this study was to compare the clinical outcome of the tension band technique with loops in different orientations and different knot positions. For this retrospective study, 72 patella fractures (71 patients) were fixed with figure-of-eight configurations in combination with 2 K-wires. Patients were divided into 3 groups according to the orientation of tension band construct. A total of 40 patella fractures were placed with figure-of-eight configurations in a vertical orientation either with 1 wire twist (group 1; 16 patella fractures) or with 2 wire twists at the adjacent corners (group 2; 24 patella fractures). Thirty-two patella fractures were placed with figure-of-eight configurations in a horizontal orientation with 2 wire twists at the adjacent corners (group 3). Range of motion, complication rates, and knee scoring scales (Hospital for Special Surgery and Lysholm) were assessed during serial follow-up. Satisfactory reductions were achieved in all groups, but functional results in the early stage were different. Group 3 had better Hospital for Special Surgery and Lysholm scores at 3 months postoperatively; however, at 6 months and 1 year postoperatively, all groups had similar scores. At the 1-year follow-up, all groups achieved acceptable flexion and range of motion. The overall complication rate was lower in the horizontal group (12.5%). Placing the figure-of-eight tension band construct in a horizontal orientation can provide functional benefits in the early stage after patella fractures. Copyright 2014, SLACK Incorporated.

Does press-fit technique reduce tunnel volume enlargement after anterior cruciate ligament reconstruction with autologous hamstring tendons? A prospective randomized computed tomography study.

PubMed

Hwang, Dae-Hee; Shetty, Gautam M; Kim, Jong In; Kwon, Jae Ho; Song, Jae-Kwang; Muñoz, Michael; Lee, Jun Seop; Nha, Kyung-Wook

2013-01-01

The purpose of this prospective, randomized, computed tomography-based study was to investigate whether the press-fit technique reduces tunnel volume enlargement (TVE) and improves the clinical outcome after anterior cruciate ligament reconstruction at a minimum follow-up of 1 year compared with conventional technique. Sixty-nine patients undergoing primary ACL reconstruction using hamstring autografts were randomly allocated to either the press-fit technique group (group A) or conventional technique group (group B). All patients were evaluated for TVE and tunnel widening using computed tomography scanning, for functional outcome using International Knee Documentation Committee and Lysholm scores, for rotational stability using the pivot-shift test, and for anterior laxity using the KT-2000 arthrometer at a minimum of 1-year follow-up. There were no significant differences in TVE between the 2 groups. In group A, in which the press-fit technique was used, mean volume enlargement in the femoral tunnel was 65% compared with 71.5% in group B (P = .84). In group A, 57% (20 of 35) of patients developed femoral TVE compared with 67% (23 of 34) of patients in group B (P = .27). Both groups showed no significant difference for functional outcome (mean Lysholm score P = .73, International Knee Documentation Committee score P = .15), or knee laxity (anterior P = .78, rotational P = .22) at a minimum follow-up of 1 year. In a comparison of press-fit and conventional techniques, there were no significant differences in TVE and clinical outcome at short-term follow-up. Level II, therapeutic study, prospective randomized clinical trial. Copyright © 2013 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Clinical and radiologic outcomes after a modified bone plug technique with anatomical meniscal root reinsertion for meniscal allograft transplantation and a minimum 18-month follow-up.

PubMed

Ren, Shiyou; Zhang, Xintao; You, Tian; Jiang, Xiaocheng; Jin, Dadi; Zhang, Wentao

2018-04-24

To evaluate the clinical and radiologic outcomes of meniscal allograft transplantation (MAT) using a modified bone plug technique. We conducted a retrospective single-center study of 73 patients who underwent MAT between January 2007 and December 2013. The International Knee Documentation Committee (IKDC) score, Lysholm score, Tegner score, visual analogue scale (VAS), and physical examinations were retrospectively reviewed to measure clinical outcomes after MAT, and questionnaires regarding activity and factors were analyzed. Magnetic resonance imaging (MRI) was used to assess the cartilage status and meniscal extrusion. The mean follow-up was 37 months for 61 patients (65 knees), and 12 patients were lost to follow-up. The mean meniscal extrusion was 3.39 ± 0.90 mm, the relative percentage of extrusion (RPE) was 34.82% ± 12.71%, and arthrosis progression was observed in 8 of 61 cases (13.1%). The mean results for VAS, IKDC, and Lysholm scores were significantly improved after MAT (P < 0.05), but there were no significant differences in the range of motion or Tegner score (P > 0.05). Thirty-eight (62.3%) patients were able to return to their previous level of activity, and 23 (37.7%) patients reached a mean 76.7% of the previous level of activity. Of the 23 patients reporting a decrease in activity, 10 reported a fear of reinjury as the primary factor limiting activity. The patient satisfaction rate in the study was 78.7%. Our modified bone plug method with anatomical meniscal root reinsertion was an effective surgical method, and the majority of active patients with meniscal disorders returned to preinjury levels of activity.

Patellofemoral arthritis treated with resurfacing implant: Clinical outcome and complications at a minimum two-year follow-up.

PubMed

Zicaro, Juan Pablo; Yacuzzi, Carlos; Astoul Bonorino, Juan; Carbo, Lisandro; Costa-Paz, Matias

2017-12-01

This study evaluated the clinical and radiographic outcomes of a series of patients treated with an anatomic inlay resurfacing implant, with a minimum two-year follow-up. Fifteen patients underwent patellofemoral-resurfacing procedures using a HemiCAP Wave Patellofemoral Inlay Resurfacing implant from 2010 to 2013. Clinical outcomes included: Visual Analog Scale (VAS), Lysholm score, Knee Society Score (KSS), and evaluation of Kujala, and Hospital for Special Surgery Patellofemoral score (HSS-PF). The postoperative complications were analyzed. Nineteen knees were evaluated; the average follow-up was 35.2months. Fourteen were women, with an average age of 54years. The pre-operative/postoperative clinical results presented a significant improvement: VAS 8/2.5, Lysholm 31.9/85.8, KSS 39.8/82.5, Kujala 32.1/79.3 and Hospital for Special Surgery Patellofemoral score (HSS-PF) 15.9/90.6. A total of 87% of patients were either satisfied or very satisfied with the overall outcome. There were no radiographic signs of loosening. Seven postoperative complications were recorded: two presented ongoing knee pain, one postoperative stiffness, one patellar bounce due to maltracking, two ilio-tibial band syndrome, and one tibial anterior tuberosity osteotomy nonunion. Two patients underwent a total knee arthroplasty conversion and were considered a failure. None of these complications were implant related. Patellofemoral inlay resurfacing for isolated patellofemoral arthritis was an effective and safe procedure with high levels of patient satisfaction. No mechanical implant failure was seen at a minimum two-year follow-up. This implant design appeared to be an alternative to the traditional patellofemoral prostheses. Concomitant osteochondral lesions, patellofemoral dysplasia or patellar maltracking might be poor prognostic factors for this type of implant. Copyright © 2017 Elsevier B.V. All rights reserved.

Tibiofemoral Instability After Primary Total Knee Arthroplasty: Posterior-Stabilized Implants for Obese Patients.

PubMed

Can, Ata; Erdogan, Fahri; Erdogan, Ayse Ovul

2017-09-01

Tibiofemoral instability is a common complication after total knee arthroplasty (TKA), accounting for up to 22% of all revision procedures. Instability is the second most common cause of revision in the first 5 years after primary TKA. In this study, 13 knees with tibiofemoral instability after TKA were identified among 693 consecutive primary TKA procedures. Patient demographics, body mass index, clinical symptoms, previous deformity, previous knee surgery, complications, interval between index TKA and first tibiofemoral instability, causes of instability, and interval between index TKA and revision TKA were retrospectively reviewed. Clinical outcomes were assessed with the Lysholm Knee Scoring Scale. All patients were women, and mean body mass index was 37.7 kg/m 2 (range, 27.2-52.6 kg/m 2 ). Mean interval between index TKA and first tibiofemoral instability was 23.4 months (range, 9-45 months), and mean interval between index TKA and revision TKA was 25.6 months (range, 14-48 months). All patients had posterior cruciate ligament-retaining implants. Of the 13 knees, 11 had flexion instability and 2 had global instability. In all patients, instability was caused by incompetence of the posterior cruciate ligament; additionally, 1 patient had undersized and malpositioned implants. In 4 knees, the polyethylene insert was broken as well. All patients underwent revision TKA. Lysholm Knee Scoring Scale score had improved from a mean of 35.8 (range, 30-46) to a mean of 68.3 (range, 66-76). All patients included in this study were female and obese. The main cause of instability was secondary posterior cruciate ligament rupture and incompetence. The use of posterior-stabilized implants for primary TKA may prevent secondary instability in obese patients. [Orthopedics. 2017; 40(5):e812-e819.]. Copyright 2017, SLACK Incorporated.

Validation of the German version of the Kujala score in patients with patellofemoral instability: a prospective multi-centre study.

PubMed

Dammerer, D; Liebensteiner, M C; Kujala, U M; Emmanuel, K; Kopf, S; Dirisamer, F; Giesinger, J M

2018-04-01

The Kujala score is the most frequently used questionnaire for patellofemoral disorders like pain, instability or osteoarthritis. Unfortunately, we are not aware of a validated German version of the Kujala score. The aim of our study was the translation and linguistic validation of the Kujala score in German-speaking patients with patella instability and the assessment of its measurement characteristics. The German Kujala score was developed in several steps of translation. In addition to healthy controls, the Kujala German was assessed in consecutive patients undergoing reconstruction of the medial patellofemoral ligament for recurrent patellar dislocations. Pre-op, 6 and 12 months postop the patients completed the Kujala German score, the KOOS, the Lysholm score, a VAS Pain, and the SF-12v2 scores. In addition, there was a Kujala German Score retest preop after a 1-week interval. We found high reliability in terms of internal consistency for the Kujala score (Cronbach's alpha = 0.87). Convergent validity with the KOOS (symptom r = 0.65, pain r = 0.78, ADL r = 0.74, sports/recreation r = 0.84, quality of life r = 0.70), the Lysholm score (r = 0.88) and the SF-12 physical component summary score (r = 0.79) and VAS pain (r = - 0.71) was also very high. Discriminant validity in terms of correlation with the SF-12 mental component summary Score was satisfactory (r = 0.14). In conclusion, the German version of the Kujala score proved to be a reliable and valid instrument in the setting of a typical patellofemoral disease treated with a standard patellofemoral procedure.

Microfracture technique versus carbon fibre rod implantation for treatment of knee articular cartilage lesions.

PubMed

Dasar, U; Gursoy, S; Akkaya, M; Algin, O; Isik, C; Bozkurt, M

2016-08-01

To compare the microfracture technique with carbon fibre rod implantation for treatment of knee articular cartilage lesions. 10 men and 30 women aged 22 to 56 (mean, 37.4) years underwent microfracture (n=20) or carbon fibre rod implantation (n=20) for International Cartilage Repair Society grade 3 to 4 knee articular cartilage lesions after a mean of 12.2 months of viscosupplementation and physiotherapy. Clinical outcome at 6 and 12 months was assessed using the Tegner-Lysholm score and modified Cincinnati score. Magnetic resonance imaging (MRI) outcome at 12 months was assessed by a radiologist. The modified magnetic resonance observation of cartilage repair tissue (MOCART) score was evaluated. The 2 groups were comparable in terms of age, body mass index, lesion location, lesion size, duration of symptoms, and coexisting pathology. The microfracture group had a higher preoperative Tegner-Lysholm score (39.4±7.3 vs. 34.4±4.9, p=0.015) and modified Cincinnati score (36.4±7.2 vs. 30.4±4.0, p=0.002) than the carbon fibre rod group. At 12 months, change in both scores was significant within each group (p<0.001) and was higher in the microfracture than carbon fibre rod group (p<0.001). MRI showed minimal regenerative tissue. Lobulation, oedema, and hypertrophy were more commonly found in the regeneration tissue after carbon fibre rod implantation than microfracture. At 12 months, the MOCART score was higher in the microfracture than carbon fibre rod group (59 vs. 47, p<0.001). Microfracture is superior to carbon fibre rod implantation in terms of clinical and radiological outcome.

[Application of radiofrequency vaporization in arthroscopic treatment of patellofemoral joint disorders].

PubMed

Xuan, Tao; Xu, Bin; Xu, Honggang; Wang, Hao

2009-01-01

To explore the treatment of patellofemoral joint disorders with radiofrequency vaporization under arthroscopy. From June 2004 to June 2007, 86 cases of patellofemoral joint disorder (98 knees) were treated by lateral retinacular release or medial retinacular tighten added, and combined with bipolar radiofrequency chondroplasty under arthroscopy. There were 30 males (34 knees) and 56 females (64 knees), aging 15-68 years (mean 40 years). The locations were left in 42 cases, right in 32 cases, both sides in 12 cases. The disease course was 3 months to 6 years (mean 30.5 months). In 98 knees, there were 28 knees of static patellar tilt, 10 knees of static patellar subluxation, 45 knees of dynamic patellar tilt and 15 knees of dynamic patellar subluxation. The Lysholm knee score preoperatively was 57.72 +/- 8.86. The patellofemoral cartilage abnormality were classified according to the Outerbridge grade (18 knees of grade I, 36 knees of grade II, 32 knees of grade III and 12 knees of grade IV). The incisions healed by first intention without complications such as infection or hemarthrosis. Seventy-five cases (82 knees) were followed up 8-37 months (mean 20.6 months). One month after operation, the patellofemoral joint pain was relieved remarkably, the knee joint activity was good and the radiological outcomes was also satisfactory. Six months after operation, the Lysholm knee score was improved significantly in patients of grades I, II and III (P < 0.05), while there was no significant change in patients of grade IV (P > 0.05). The postoperative score was 69.95 +/- 5.42 (P < 0.05). Radiofrequency vaporization chondroplasty and soft tissue balance under arthroscopy are advantageous in terms of easy operation, less injury, slight reaction and have good effect on patellofemoral joint disorders.

Second-Look Arthroscopic Assessment and Clinical Results of Modified Pull-Out Suture for Posterior Root Tear of the Medial Meniscus

PubMed Central

Song, Jae-Gwang

2014-01-01

Purpose To identify the structural integrity of the healing site after arthroscopic repair of a posterior root tear of the medial meniscus by second-look arthroscopy and to determine the clinical relevance of the findings. Materials and Methods From January 2005 to December 2010, 20 consecutive patients underwent arthroscopic modified pull-out suture repair for a posterior root tear of the medial meniscus. Thirteen patients were available for second-look arthroscopic evaluation. The healing status of the medial meniscus was classified as complete healing, lax healing, scar tissue healing, and failed healing. We evaluated the correlation between the clinical symptoms and second-look arthroscopic findings. Clinical evaluation was based on the Lysholm knee scores and Hospital for Special Surgery (HSS) scores. Results There were 4 cases of complete healing, 4 lax healing, 4 scar tissue healing, and 1 failed healing. The healing status of the repaired meniscus appeared to be related to the clinical symptoms. Patients who achieved complete tissue healing had no complaint. The healing status exhibited no relationship with age, mechanical axis, degree of subluxation, and symptom duration. The mean Lysholm score improved from 34.7 preoperatively to 75.6 at follow-up and the mean HSS score also significantly increased from 33.5 to 82.2. Conclusions We achieved 4 complete and 8 partial healing (lax or scar) of the medial meniscus in this retrospective case series of posterior horn meniscus root repairs performed by 1 surgeon. Further research is needed to clarify why all patients showed clinical improvement despite findings of partial healing on second-look arthroscopy. PMID:24944976

Traumatic posterior root tear of the medial meniscus in patients with severe medial instability of the knee.

PubMed

Ra, Ho Jong; Ha, Jeong Ku; Jang, Ho Su; Kim, Jin Goo

2015-10-01

To examine the incidence and diagnostic rate of traumatic medial meniscus posterior root tear associated with severe medial instability and to evaluate the effectiveness of pullout repair. From 2007 to 2011, 51 patients who underwent operation due to multiple ligament injuries including medial collateral ligament rupture were reviewed retrospectively. The International Knee Documentation Committee (IKDC) subjective and Lysholm score were evaluated pre- and postoperatively. Postoperative magnetic resonance imaging (MRI) was performed, and if indicated, a second-look arthroscopic examination was conducted. Fourteen out of 51 patients were associated with severe medial instability. Seven patients were diagnosed with traumatic medial meniscus posterior root tear and underwent arthroscopic pullout repair. Five of them were missed at initial diagnosis using MRI. In seven patients, the mean Lysholm and IKDC subjective scores improved from 74.6 ± 10.3 and 47.6 ± 7.3 to 93.0 ± 3.7 and 91.6 ± 2.6, respectively. All showed complete healing of meniscus root on follow-up MRI and second-look arthroscopy. Medial meniscus posterior root tear may occur in severe medial instability from trauma. It is a common mistake that surgeons may not notice on the diagnosis of those injuries using MRI. Therefore, a high index of suspicion is required for the diagnosis of medial meniscus posterior root tear in this type of injuries. The traumatic medial meniscus posterior root tear could be healed successfully using arthroscopic pullout repair technique. The possibility of the medial meniscus posterior root tear should be considered in severe medial instability and arthroscopic pullout repair can be an effective option for treatment. Case series with no comparison group, Level IV.

A novel technique of using a miniature plate in combination with tension band wiring to treat comminuted patellar fractures

PubMed Central

Gao, Song; Liu, Xuqiang; Zhang, Fengtian; Gao, Tian; Zhang, Zhihong; Dai, Min

2018-01-01

Abstract Traditionally, tension band fixation has been used for treating simple fracture patterns; however, fixation remains a challenge, especially for comminuted fractures. We describe a new method of operation using a combination of a miniature plate with tension band wiring to treat comminuted patellar fractures. The aim of this technique is to transform complicate fractures into simple transverse fractures. As far as we know, no studies using a similar method have been found. The purpose of this study was to assess the effectiveness of a novel technique in which a miniature plate is used in combination with tension band wiring to treat comminuted patellar fractures. Between March 2013 and May 2015, 16 patients with closed, displaced, comminuted fractures of the patella were included in the present study. All subjects underwent fixation using a combination of a miniature plate with a tension band wire. Knee function and patient status were evaluated at 12 months using the Böstman knee score and Lysholm knee scale. The average follow-up period was 15.6 months (range, 12–20 months). At the 12-month follow-up, bone healing was satisfactory in all patients. The average postoperative Lysholm score was 91.6 ± 1.4 (range, 84–97). The average postoperative Böstman scale score was 26.4 ± 0.5 (range, 22–30), thereby indicating excellent results in 4 patients and good results in 12. No patients required reoperation. The results demonstrate that this new technique is an effective and safe treatment option for comminuted patella fractures, as it is associated with good clinical outcomes. PMID:29642160

Therapeutic effects of short-term monochromatic infrared energy therapy on patients with knee osteoarthritis: a double-blind, randomized, placebo-controlled study.

PubMed

Hsieh, Ru-Lan; Lo, Min-Tzu; Lee, Wen-Chung; Liao, Wei-Cheng

2012-11-01

Randomized, double-blind, placebo-controlled study. To examine the short-term therapeutic effects of monochromatic infrared energy (MIRE) on participants with knee osteoarthritis (OA). Patients were assessed according to the International Classification of Functioning, Disability and Health. MIRE is commonly used in therapy for patients with peripheral neuropathies. However, research has not focused intensively on the therapeutic effects of MIRE in patients with knee OA. This study enrolled 73 participants with knee OA. Participants received six 40-minute sessions of active or placebo MIRE treatment (890-nm wavelength; power, 6.24 W; energy density, 2.08 J/cm2/min; total energy, 83.2 J/cm2) over the knee joints for 2 weeks. International Classification of Functioning, Disability and Health-related outcomes were collected weekly over 4 weeks using the Knee injury and Osteoarthritis Outcome Score, Lysholm Knee Scale, Hospital Anxiety and Depression Scale, Multidimensional Fatigue Inventory, Chronic Pain Grade questionnaire, World Health Organization Quality of Life-brief version, and OA Quality of Life Questionnaire. Data were analyzed by repeated-measures analysis of variance. No statistically significant differences were found for the interaction of group by time for Knee injury and Osteoarthritis Outcome Score scores, including pain, other symptoms, function in daily living, function in sport and recreation, and knee-related quality of life. Scores on the Lysholm Knee Scale, Hospital Anxiety and Depression Scale, Multidimensional Fatigue Inventory, Chronic Pain Grade questionnaire, World Health Organization Quality of Life-brief version, and OA Quality of Life Questionnaire also showed no significant differences between the 2 groups at any of the 4 follow-up assessments. Short-term MIRE therapy provided no beneficial effects to body functions, activities, participation, and quality of life in patients with knee OA.

RECONSTRUCTION OF THE ANTERIOR CRUCIATE LIGAMENT WITH THE CENTRAL THIRD OF THE QUADRICEPS MUSCLE TENDON: ANALYSIS OF 10-YEAR RESULTS

PubMed Central

Guimarães, Marcus Valladares; Junior, Lúcio Honório de Carvalho; Terra, Dalton Lopes

2015-01-01

Objective: Assess clinical results using two different protocols, 10 years after ACL reconstruction surgery with the central third of quadriceps muscle tendon (QT). Method: Between November /1997 and April/1998, 25 patients were submitted to 25 ACL reconstructions with QT by transtibial technique. The bone portion of the graft was fixated on femoral tunnel with interference screw and the tendinous portion of tibial tunnel with screw with washer. Two patients injured the new when playing soccer. Six patients were not available for follow-up (24%). Seventeen patients were evaluated, 15 men and two women, with mean age at surgery time of 28.53 ± 6.64 years. All patients were examined at six months, one year, and ten years after surgery. Clinical evaluation was made by the Lysholm scale, and the knee evaluation, with the Hospital for Special Surgery scale. Results: The patients had their injuries operated after 9.87 ± 14.42 months of the accident. According to Lysholm scale, the results at the end of the first year were 98.71 ± 2.47 and, after 10 years, 97.35 ± 3.12. Using the Hospital for Special Surgery scale, the mean score was 95.07 ± 5.23 in one year, and 94.87 ± 4.16 in 10 years. All patients returned to their professional activities with the same previous status. Fifteen (88.24%) patients were able to return to their sports activities, one by modifying the practice, while another one switched to another sport. No patient complained of pain on the donor area in the medium and long term. The sports return rate was excellent, and no changes were found on the femoropatellar joint. PMID:27022511

Advantages of external hybrid fixators for treating Schatzker V-VI tibial plateau fractures: A retrospective study of 40 cases.

PubMed

Gross, J-B; Gavanier, B; Belleville, R; Coudane, H; Mainard, D

2017-10-01

Proximal tibia fractures make up 1% of all fractures in adults. The fractures classified as Schatzker V and VI fractures can compromise knee structure and function. They are challenging to treat and often have complications. While plate fixation is the gold standard, the resulting infection rate has led us to favor external hybrid fixation. The aims of this study were to assess the radiographic and functional outcomes along with the complication rate when using this method and to compare them to historical plate fixation data. This was a retrospective study of 40 patients. The complications, quality of reduction, IKS, Lysholm and Rasmussen functional scores at the latest follow-up and factors affecting the functional outcome were evaluated. These parameters were compared to published results from plate fixation studies. The deep infection rate was 2.5%. The union rate was 80%. Satisfactory reduction was obtained in 70% of cases; however, 52% of patients had malunion. The mean IKS score was 73.74, the mean Rasmussen score was 22.85 and the mean Lysholm score was 75.53. Age, reduction at latest follow-up, mechanical axis and anteroposterior laxity had a significant effect on the functional outcome. Despite the malunion rate being higher than other studies, the functional outcomes were nearly identical based on the variables measured. There are several advantages associated with using a hybrid external fixator: shorter operative time, less bleeding, shorter hospital stays and lower infection rate. Hybrid external fixation is a reliable fracture fixation method that leads to satisfactory functional outcomes, while reducing the infection rate and allowing arthroplasty to be performed in the future if needed. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Knee Dislocations

PubMed Central

Schenck, Robert C.; Richter, Dustin L.; Wascher, Daniel C.

2014-01-01

Background: Traumatic knee dislocation is becoming more prevalent because of improved recognition and increased exposure to high-energy trauma, but long-term results are lacking. Purpose: To present 2 cases with minimum 20-year follow-up and a review of the literature to illustrate some of the fundamental principles in the management of the dislocated knee. Study Design: Review and case reports. Methods: Two patients with knee dislocations who underwent multiligamentous knee reconstruction were reviewed, with a minimum 20-year follow-up. These patients were brought back for a clinical evaluation using both subjective and objective measures. Subjective measures include the following scales: Lysholm, Tegner activity, visual analog scale (VAS), Short Form–36 (SF-36), International Knee Documentation Committee (IKDC), and a psychosocial questionnaire. Objective measures included ligamentous examination, radiographic evaluation (including Telos stress radiographs), and physical therapy assessment of function and stability. Results: The mean follow-up was 22 years. One patient had a vascular injury requiring repair prior to ligament reconstruction. The average assessment scores were as follows: SF-36 physical health, 52; SF-36 mental health, 59; Lysholm, 92; IKDC, 86.5; VAS involved, 10.5 mm; and VAS uninvolved, 2.5 mm. Both patients had excellent stability and were functioning at high levels of activity for their age (eg, hiking, skydiving). Both patients had radiographic signs of arthritis, which lowered 1 subject’s IKDC score to “C.” Conclusion: Knee dislocations have rare long-term excellent results, and most intermediate-term studies show fair to good functional results. By following fundamental principles in the management of a dislocated knee, patients can be given the opportunity to function at high levels. Hopefully, continued advances in the evaluation and treatment of knee dislocations will improve the long-term outcomes for these patients in the future. PMID:26535332

Combined distal femoral osteotomy (DFO) in genu valgum leads to reliable patellar stabilization and an improvement in knee function.

PubMed

Frings, Jannik; Krause, Matthias; Akoto, Ralph; Wohlmuth, Peter; Frosch, Karl-Heinz

2018-06-04

Valgus deformities of the lower extremity influence patellofemoral joint kinematics. However, studies examining the clinical outcome after treatment of patellar instability and maltracking due to valgus deformity are rare in recent literature. This study's purpose is to analyze the clinical results after combined distal femoral osteotomy (DFO) for treatment of patellar instability. From 2010 to 2016, 406 cases of patellofemoral instability and maltracking were treated. Twenty cases of recurring (≥ 2) patellar dislocations with genu valgum and unsuccessful conservative treatment were included in the study. A radiological analysis was performed, and anteroposterior (AP), lateral and long leg standing radiographs were analyzed, and the leg axis was pre- and postoperatively measured. At least 12 months postoperatively, the clinical leg axis, range of motion (ROM), apprehension sign, Zohlen sign, and J-sign were physically examined. Pain level and knee function were objectified on a visual analogue scale (VAS). The Lysholm, Kujala, and Tegner scores, re-dislocation rate, and patient satisfaction were also examined. 20 combined DFOs on 18 patients with a median age of 23 years (15-55 years) were performed. The preoperative mechanical leg axis was 6.5° ± 2.0° valgus, and the mean tibial tuberosity to trochlear groove (TT-TG) distance was 19.1 ± 4.8 mm. All patients reported multiple dislocations. Intraoperatively, 71% presented III°-IV° cartilage lesions, located retropatellarly in 87% and correlating negatively with the postoperative Lysholm score (r = - 0.462, p = 0.040). The leg axis was corrected by 7.1° ± 2.6°, and in 17 cases, the tibial tubercle was additionally medialized by 10 ± 3.1 mm. All patellae were re-stabilized with medial patellofemoral ligament reconstruction. After a median period of 16 (12-64) months, the pain level decreased from 8.0 ± 1.4 to 2.3 ± 2.1 (VAS p ≤ 0.001) and knee function improved from 40.1 ± 17.9 to 78.5 ± 16.6 (Kujala p ≤ 0.001), 36.1 ± 19.5 to 81.6 ± 11.7 (Lysholm p ≤ 0.001), and 2.0 (1-5) to 4.0 (3-6) (median Tegner p ≤ 0.001). No re-dislocation was observed. Combined DFO is a suitable treatment for patellar instability and maltracking due to genu valgum, as it leads to very low re-dislocation rates, a significant reduction of pain, and a significant increase of knee function with good-to-excellent results in the short-term follow-up. However, a high prevalence of substantial cartilage lesions is observed, causing postoperative limitations of knee function. IV, retrospective cohort study.

Over-the-top ACL Reconstruction Plus Extra-articular Lateral Tenodesis With Hamstring Tendon Grafts: Prospective Evaluation With 20-Year Minimum Follow-up.

PubMed

Zaffagnini, Stefano; Marcheggiani Muccioli, Giulio Maria; Grassi, Alberto; Roberti di Sarsina, Tommaso; Raggi, Federico; Signorelli, Cecilia; Urrizola, Francisco; Spinnato, Paolo; Rimondi, Eugenio; Marcacci, Maurilio

2017-12-01

There are few published studies with very long-term follow-up of combined intra- and extra-articular anterior cruciate ligament (ACL) reconstruction. To analyze clinical and radiographic outcomes of over-the-top ACL reconstruction plus extra-articular lateral tenodesis with autologous hamstrings at minimum 20-year follow-up. Case series; Level of evidence, 4. Of 60 originally eligible patients who underwent over-the-top ACL reconstruction with double-stranded hamstring tendon (leaving intact graft tibial insertions) and extra-articular lateral plasty (performed with the remnant part of tendons), 52 were prospectively evaluated at a minimum 20-year follow-up (mean follow-up, 24 years; 41 men, 11 women; mean age at time of surgery, 25.5 ± 7.6 years). Twenty-nine patients were available for prospective evaluations: clinical (Lysholm, Tegner, and objective International Knee Documentation Committee [IKDC]), instrumented (KT-2000), and radiographic (standard, long-standing, and Merchant views). Subjective KOOS (Knee injury and Osteoarthritis Outcome Score) and objective inertial sensor pivot-shift analysis (KiRA) were carried out at final follow-up. Twenty-three patients were investigated by phone interview for subjective Tegner score and documented complications, rerupture, or revision surgery. At final follow-up, mean Lysholm score was 85.7 ± 14.6; median Tegner score, 4 (range, 3-5); sport activity resumption, 86.2%; and objective IKDC score, good or excellent in 86% of patients (31%, A; 55%, B). Only 3 of 26 patients (12%) had >5-mm manual maximum KT-2000 side-to-side difference. KiRA system documented positive pivot-shift (>0.9-m/s 2 tibial acceleration side-to-side difference) in these 3 of 26 patients (12%). Statistically significant changes were as follows: decrease in Tegner score from 7 (range, 6-8) at 5-year follow-up to 4 (range, 3-5) at 10 years ( P < .0001) and decrease in Lysholm score from 96.1 ± 7.3 at 10-year follow-up to 85.7 ± 14.6 at 20 years ( P = .0003). Radiographic evaluation demonstrated significant difference of medial joint space between injured and healthy knees in patients with concomitant medial meniscectomy (n = 8, 3.2 ± 0.6 vs 5.0 ± 1.8 mm, P = .0114). No significant differences were reported regarding lateral or patellofemoral joint space. One patient (2%) experienced rerupture, with 3 of 52 (5.8%) having a contralateral ACL injury (excluded from KT-2000 and radiographic evaluations). Overall, 4 of 29 clinical failures (objective IKDC, KT-2000) and 1 rerupture among 52 patients were registered at final follow-up. Studied surgical technique demonstrated good results in laxity control at 20-year minimum follow-up. The lateral extra-articular plasty associated with ACL reconstruction did not generate lateral knee or patellofemoral osteoarthritis. The factor increasing osteoarthritis was meniscectomy.

Posterolateral Corner Reconstruction using the Anatomical Two-Tailed Graft Technique: Clinical Outcomes in the Multiligament Injured Knee.

PubMed

Woodmass, Jarret M; Sanders, Thomas L; Johnson, Nick R; Wu, Isabella T; Krych, Aaron J; Stuart, Michael J; Levy, Bruce A

2018-02-14

Injury to the posterolateral corner (PLC) of the knee can lead to both varus and rotational instability. Multiple PLC reconstruction techniques have been described, including one-tailed graft (fibula-based constructs) or two-tailed graft (combined fibula- and tibia-based constructs). The purpose of our study was to evaluate the clinical outcomes of anatomical two-tailed graft reconstruction of the PLC in the setting of multiligament knee injuries (MKLIs) with grade III varus instability. Patients were identified through a prospective MLKI database between 2004 and 2013. Patients who received fibular collateral ligament and PLC reconstructions using a two-tailed graft and had a minimum follow-up of 2 years were included. Patients were assessed for clinical laxity grade, range of motion, and functional outcomes using Lysholm and International Knee Documentation Committee (IKDC) scores. Twenty patients (16 male, 4 female) with a mean age of 30.7 (range: 16-52) and a mean follow-up of 52.2 months (range: 24-93 months) were included. Knee dislocation (KD) grades included: 4 KD-1, 10 KD 3-L, 5 KD-4, and 1 KD-5. No patients had isolated PLC injuries. Mean IKDC and Lysholm score were 73.1 ± 25.8 and 78 ± 26, respectively. Mean range of motion was -1.1 to 122.8. In full extension, two patients (10%) had grade 1 laxity to varus stress. In 30 degrees of knee flexion, five (25%) patients had grade 1 laxity, and two (10%) had grade 2 laxity. Anatomical two-tailed PLC reconstruction can reliably restore varus stability when performed on patients with MLKIs and type C posterolateral instability with hyperextension external rotation recurvatum deformity. Satisfactory functional outcome scores were achieved in the majority of patients. This study supports the use of an anatomical two-tailed PLC reconstruction in the multiligament injured knee. The level of evidence is IV, case series. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Comparison of clinical outcomes and second-look arthroscopic findings after ACL reconstruction using a hamstring autograft or a tibialis allograft.

PubMed

Yoo, Seung-Hyun; Song, Eun-Kyoo; Shin, Young-Rok; Kim, Sung-Kyu; Seon, Jong-Keun

2017-04-01

The purpose of this prospective randomized clinical study was to compare the clinical and radiological outcomes, including tibial tunnel widening and the progression of osteoarthritis after ACL reconstruction using a hamstring autograft or a tibialis allograft. In addition, we compared the graft tear and synovial coverage of grafts in patients that underwent the second-look arthroscopy. Among 184 patients with an ACL injury who underwent ACL reconstruction, 68 patients of autograft group and 64 patients of tibialis allograft group were included for this study after minimum of 2-year follow-up. The Lachman and pivot-shift tests, Tegner activity score, Lysholm knee score, and IKDC score were compared between the two groups. The quadriceps and hamstring isokinetic strengths using dynamometer were also compared. Degree of OA was determined using the Kellgren-Lawrence grading system on the weight-bearing radiographs. In total, 51 patients (26 patients in autograft group and 25 in the tibialis allograft group) underwent the second-look arthroscopy, in which we compared the apparent tear of graft and synovial coverage of grafts. At the final follow-up, there were no statistical significances in the two groups in Lachman and pivot-shift tests (n.s.). The Tegner activity, Lysholm knee score, and IKDC scores were similar in the two groups. Moreover, no significant differences were observed in the muscle power (n.s.). Some patients showed the progression of OA (five in autograft and four in allograft groups) without intergroup difference (n.s.). Regarding the findings of second-look arthroscopy, although there was no significant difference in graft tear, synovial coverage was better in autograft group than in allograft group. Even though hamstring autografts and tibialis allografts provided good functional outcomes without significant differences, the second-look arthroscopy revealed that hamstring autografts produced better synovial coverage than tibialis allograft. I.

Long-term absorption of poly-L-lactic Acid interference screws.

PubMed

Barber, F Alan; Dockery, W Dee

2006-08-01

To evaluate the long term in vivo degradation of poly-L-lactic acid (PLLA) interference screws with computed tomography (CT) and radiography as used in patellar tendon autograft anterior cruciate ligament (ACL) reconstruction. A total of 20 patients who had undergone patellar tendon autograft ACL reconstruction fixed with PLLA screws at least 7 years earlier were evaluated by physical examination, radiography, and CT to determine whether PLLA screw reabsorption and bone ingrowth had occurred. This study was granted Institutional Review Board approval. Lysholm, Tegner, Cincinnati, and International Knee Documentation Committee (IKDC) scores were obtained. CT data were measured in Hounsfield units. In all, 15 men and 5 women were evaluated 104 months after surgery (range, 89 to 124 months). CT and radiography demonstrated that the bone plug had fused to the tunnel wall, and that no intact interference screw was left. A parallel, threaded, and corticated screw tract was visible adjacent to the bone plug. No bone ingrowth had occurred at the screw site, although, occasionally, minimal calcification was seen. This was never as dense as cancellous bone, and no trabeculae were ever present. No positive pivot-shift test results were obtained. Lysholm, Tegner, and Cincinnati scores were 83, 5.6, and 75, respectively, at follow-up. Average KT difference was 0.7 mm. PLLA interference screws completely degraded, and the resulting area demonstrated a low Hounsfield count, consistent with soft tissue 7 years after insertion. No significant bone ingrowth occurred at the screw site. Femoral and tibial ACL tunnels were absent of anything but fibrous tissue and usually had a sclerotic cortical lining. PLLA biodegradable ACL screws eventually disappear completely. PLLA material is not replaced by bone. ACL graft tunnels are filled with nonossified material. This study provides a baseline for comparison with other biodegradable interference screws that may encourage bone ingrowth as they degrade. Level IV (no or historical control).

Arthroscopic single-bundle anterior cruciate ligament reconstruction with six-strand hamstring tendon allograft versus bone-patellar tendon-bone allograft.

PubMed

Dai, Chengliang; Wang, Fei; Wang, Xiaomeng; Wang, Ruipeng; Wang, Shengjie; Tang, Shiyu

2016-09-01

The aim of this study was to compare the clinical outcomes of arthroscopic single-bundle anterior cruciate ligament (ACL) reconstruction with six-strand hamstring tendon (HT) allograft versus bone-patellar tendon-bone (BPTB) allograft. The prospective randomized controlled trial was included 129 patients. Sixty-nine patients received reconstruction with six-strand HT allografts (HT group), whereas 60 patients with BPTB allografts (BPTB group). Outcome assessment included re-rupture findings, International Knee Documentation Committee (IKDC) scores, Lysholm scores, KT-1000 arthrometer, Lachman test, pivot-shift test, range of motion (ROM) and single-leg hop test. At a mean follow-up of 52 months, 113 patients (HT group, 61 patients; BPTB group, 52 patients) completed a minimum 4-year follow-up. Four patients in HT group and six in BPTB group experienced ACL re-rupture (6.2 vs. 10.3 %) and received revision surgery. Significant between-group differences were observed in KT-1000 outcomes and pivot-shift test 1 (1.2 ± 1.5 vs. 1.8 ± 1.3, p = 0.025; positive rate 6.5 vs. 18.9 %, p = 0.036), 2 (1.1 ± 1.4 vs. 1.6 ± 1.2, p = 0.044; 8.1 vs. 20.7 %, p = 0.039), 4 (1.1 ± 1.5 vs. 1.7 ± 1.4, p = 0.031; 9.7 vs. 25 %, p = 0.012) years postoperatively. The outcomes between the two groups were comparable in terms of IKDC scores, Lysholm scores, Lachman test, ROM and single-leg hop test. Six-strand HT allograft achieved superior anteroposterior and rotational stability after single-bundle ACL reconstruction. It is a reasonable graft substitute for ACL reconstruction. II.

Biodegradable screw versus a press-fit bone plug fixation for hamstring anterior cruciate ligament reconstruction: a prospective randomized study.

PubMed

Jagodzinski, Michael; Geiges, Bjoern; von Falck, Christian; Knobloch, Karsten; Haasper, Carl; Brand, Juergen; Hankemeier, Stefan; Krettek, Christian; Meller, Rupert

2010-03-01

Press-fit fixation of a tendon graft has been advocated to achieve tendon-to-bone healing. Fixation of hamstring tendon grafts with a porous bone scaffold limits bone tunnel enlargement compared with a biodegradable interference screw fixation. Randomized controlled trial; Level of evidence, 1. Methods Between 2005 and 2006, 20 patients (17 men, 3 women) with a primary reconstruction of the anterior cruciate ligament (ACL) were enrolled in this study. Patients were randomized to obtain graft fixation in the tibial tunnel either by means of an interference screw (I) or a press-fit fixation with a porous bone cylinder (P). At 3 months after surgery, a computed tomography (CT) scan of the knee was performed, and tunnel enlargement was analyzed in the coronal and sagittal planes for the proximal, middle, and distal thirds of the tunnel. After 6 months and 1 and 2 years, radiographs of the knee in the sagittal and coronal plane were analyzed for bone tunnel widening. The International Knee Documentation Committee (IKDC), Tegner, and Lysholm scores of both groups were compared after 1 and 2 years. The bone tunnel enlargement determined by CT was 106.9% + or - 10.9% for group P and 121.9% + or - 9.0% for group I (P < .02) in the anteroposterior (AP) plane and 102.8% + or - 15.2% versus 121.5% + or - 10.1% in the coronal plane (P <.01). The IKDC, Tegner, and Lysholm scores improved in both groups from preoperatively to postoperatively without significant differences between the 2 groups. There was a trend to higher knee stability in group P after 3 months (0.6 + or - 1.4 mm vs 1.8 + or - 1.5 mm; P = .08). Both interference screw and a press-fit fixation lead to a high number of good or very good outcomes after ACL reconstruction. Tibial press-fit fixation decreases the amount of proximal bone tunnel enlargement.

[Biodegradable screw versus a press-fit bone plug fixation for ACL reconstruction: a prospective randomized study].

PubMed

Geiges, B; von Falck, C; Knobloch, K; Haasper, C; Meller, R; Krettek, C; Hankemeier, S; Brand, J; Jagodzinski, M

2013-02-01

Press-fit fixation of a tendon graft has been advocated in order to achieve tendon to bone healing. Fixation of a tendon graft with a porous bone scaffold limits bone tunnel enlargement compared with a biodegradable interference screw fixation. Between 2005 and 2006, 20 patients (17 men, 3 women) were enrolled in this study for primary reconstruction of the ACL. Patients were randomized to either obtain graft fixation in the tibial tunnel by means of an interference screw (I) or a press-fit fixation with a porous bone cylinder (P). Three months after surgery, a CT scan of the knee was performed and tunnel enlargement was analysed in the coronal and sagittal planes for the proximal, middle and distal thirds of the tunnel. After 6 months, 1 and 2 years, International Knee Documentation Committee (IKDC), Tegner and Lysholm scores of both groups were compared. The bone tunnel enlargement was 106.9±10.9% for group P and 121.9±9.0% for group I (P<0.02) in the AP plane and 102.8±15.2% vs 121.5±10.1% in the coronal plane (P<0.01). IKDC, Tegner, and Lysholm scores improved in both groups from pre- to postoperative assessment without significant differences between the two groups. There was a trend to higher knee stability in group P after 3 months (0.6±1.4 mm vs 1.81±.5 mm, P=0.08). Both interference screw and a press-fit fixation lead to a high number of good or very good outcomes after ACL reconstruction. Tibial press-fit fixation decreases the amount of proximal bone tunnel enlargement. Press-fit fixation decreases the amount of proximal bone tunnel enlargement and improves bone to tendon contact.

Patellofemoral dysbalance and genua valga: outcome after femoral varisation osteotomies.

PubMed

Dickschas, Jörg; Ferner, Felix; Lutter, Christoph; Gelse, Kolja; Harrer, Jörg; Strecker, Wolf

2018-01-01

Patellofemoral dysbalance may be caused by trochlear dysplasia, an elevated TTTG distance, femoral or tibial torsional deformities, patella alta, or a genu valgum. The surgical procedure for the treatment of a genu valgum is varisation osteotomy, usually in the femoral aspect. Several authors believe that a genu valgum is one cause of patellofemoral dysbalance, but studies about the outcome of the treatment with a varisation osteotomy are rare. Nineteen knees in 18 patients, aged on average 28 (16-52) years were investigated in a retrospective study. The patients had symptoms of patellofemoral instability or anterior knee pain due to a genu valgum, without symptoms of a lateral femorotibial compartment. All patients underwent a femoral varisation osteotomy. The diagnostic investigation prior to surgery included full-leg radiographs and torsional angle CT scans. The pre-surgery and follow-up investigation included the visual analog scale (VAS), the Kujala score, the Japanese Knee Society score, the Lysholm score. The mean duration of follow-up was 44(10-132) months. The mean preoperative mechanical valgus was 5.6° (range 4-10°). Twelve patients mentioned patellar instability as the main symptom while 14 mentioned anterior knee pain. No redislocation occurred in the follow-up period. Anterior knee pain on the VAS (p value < 0.001) was significantly reduced (5.6-2.1). The Japanese Knee Society score improved from 87 to 93 (p value 0.013) points, the Kujala score improved significantly from 72 to 87 (p value 0.009), and the Lysholm score significantly from 76 to 92 (p value < 0.001). Genua valga can lead to patellofemoral dysbalance, treatment of this condition is femoral varisation osteotomy. In this study, patellofemoral stability was achieved and anterior knee pain was significantly reduced. Significant improvements in clinical scores proved the success of the treatment. IV, case series.

Treatment of recurrent patellar dislocation via knee arthroscopy combined with C-arm fluoroscopy and reconstruction of the medial patellofemoral ligament.

PubMed

Li, Li; Wang, Hongbo; He, Yun; Si, Yu; Zhou, Hongyu; Wang, Xin

2018-06-01

Recurrent patellar dislocations were treated via knee arthroscopy combined with C-arm fluoroscopy, and reconstruction of the medial patellofemoral ligaments. Between October 2013 and March 2017, 52 cases of recurrent patellar dislocation [27 males and 25 females; age, 16-47 years (mean, 21.90 years)] were treated. Arthroscopic exploration was performed and patellofemoral joint cartilage injuries were repaired. It was subsequently determined whether it was necessary to release the lateral patellofemoral support belt. Pre-operative measurements were used to decide whether tibial tubercle osteotomy was required. Medial patellofemoral ligaments were reconstructed using autologous semitendinosus tendons. Smith and Nephew model 3.5 line anchors were used to double-anchor the medial patellofemoral margin. On the femoral side, the medial patellofemoral ligament was fixed using 7-cm, absorbable, interfacial compression screws. All cases were followed for 1-40 months (average, 21 months). The Q angle, tibial tuberosity trochlear groove distance, Insall-Salvati index, patellofemoral angle, lateral patellofemoral angle and lateral shift were evaluated on X-Ray images using the picture archiving and communication system. Subjective International Knee Documentation Committee (IKDC) knee joint functional scores and Lysholm scores were recorded. Post-operative fear was absent, and no patellar re-dislocation or re-fracture was noted during follow-up. At the end of follow-up, the patellofemoral angle (0.22±4.23°), lateral patellofemoral angle (3.44±1.30°), and lateral shift (0.36+0.14°) differed significantly from the pre-operative values (all, P<0.05). Furthermore, IKDC and Lysholm scores (87.84+3.74 and 87.48+3.35, respectively) differed significantly from the pre-operative values (both, P<0.05). These findings suggest that, in the short term, recurrent patellar dislocation treatment via knee arthroscopy combined with C-arm fluoroscopy and reconstruction of the medial patellofemoral ligament was effective.

Opening-wedge high tibial osteotomy with a locked low-profile plate: surgical technique.

PubMed

Kolb, Werner; Guhlmann, Hanno; Windisch, Christoph; Koller, Heiko; Grützner, Paul; Kolb, Klaus

2010-09-01

High tibial osteotomy has been recognized as a beneficial treatment for osteoarthritis of the medial compartment of the knee. The purpose of this prospective study was to assess the short-term results of opening-wedge high tibial osteotomies with locked plate fixation. From September 2002 to November 2005, fifty-one consecutive medial opening-wedge high tibial osteotomies were performed. The mean age of the patients at the time of the index operation was forty-nine years. The preoperative and postoperative factors analyzed included the grade of arthritis of the tibiofemoral compartment (the Ahlbäck radiographic grade), the anatomic tibiofemoral angle, patellar height, the Hospital for Special Surgery rating system score, and the Lysholm and Gillquist knee score. Postoperatively, one superficial wound infection occurred. Fifty of the fifty-one osteotomies healed after an average period of 12.9 weeks (range, eight to sixteen weeks) without bone grafts. A nonunion developed in a sixty-two-year-old patient who was a cigarette smoker. The average postoperative tibiofemoral angle was 9° of valgus. Forty-nine patients were followed for a mean of fifty-two months. The average score on the Hospital for Special Surgery rating system was 86 points at the time of the most recent follow-up. The rating was excellent in twenty-eight patients (57%), good in twelve (24%), fair in four (8%), and poor in five (10%). The average score on the Lysholm and Gillquist knee-scoring scale was 83 points. According to these scores, the outcome was excellent in nine patients (18%), good in thirty-one (63%), fair in three (6%), and poor in six (12%). Four knees failed after an average of thirty-six months. Our results suggest that an opening-wedge high tibial osteotomy with locked plate fixation allows a correct valgus angle to be achieved with good short-term results.

A prospective study of pain reduction and knee dysfunction comparing femoral skeletal traction and splinting in adult trauma patients.

PubMed

Bumpass, David B; Ricci, William M; McAndrew, Christopher M; Gardner, Michael J

2015-02-01

To determine if distal femoral traction pins result in knee dysfunction in patients with femoral or pelvic fracture, and to determine if skeletal traction relieves pain more effectively than splinting for femoral shaft fractures. Prospective cohort trial. Level I urban trauma center. One hundred twenty adult patients with femoral shaft, acetabular, and unstable pelvic fractures. Patients with femoral shaft fractures were placed into distal femoral skeletal traction or a long-leg splint, based on an attending-specific protocol. Patients with pelvic or acetabular fractures with instability or intraarticular bone fragments were placed into skeletal traction. An initial Lysholm knee survey was administered to assess preinjury knee pain and function; the survey was repeated at 3- and 6-month follow-up visits. Also, a 10-point visual analog scale was used to document pain immediately before, during, and immediately after fracture immobilization with traction or splinting. Thirty-five patients (29%) were immobilized with a long-leg splint, and 85 (71%) were immobilized with a distal femoral traction pin. Eighty-four patients (70%) completed a 6-month follow-up. Lysholm scores decreased by a mean 9.3 points from preinjury baseline to 6 months postinjury in the entire cohort (P < 0.01); no significant differences were found between the splint and traction pin groups. During application of immobilization, visual analog scale pain scores were significantly lower in traction patients as compared with splinted patients (mean, 1.9 points less, P < 0.01). Traction pins caused no infections, neurovascular injuries, or iatrogenic fractures. Distal femoral skeletal traction does not result in detectable knee dysfunction at 6 months after insertion, and results in less pain during and after immobilization than long-leg splinting. Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Second-look arthroscopic findings after repairs of posterior root tears of the medial meniscus.

PubMed

Seo, Hee-Soo; Lee, Su-Chan; Jung, Kwang-Am

2011-01-01

A posterior root tear of the medial meniscus disrupts hoop tension and causes extrusion of the meniscus, which results in progressive cartilage degeneration. To identify the structural integrity of healing after arthroscopic repair of a posterior root tear of the medial meniscus by second-look arthroscopy and to determine the clinical relevance of the findings. Case series; Level of evidence, 4. From December 2006 to August 2008, 21 consecutive patients underwent arthroscopic pullout suture repair for a posterior root tear of the medial meniscus. Eleven were available for second-look arthroscopy evaluation (mean, 13.4 months; range, 10 to 22 months). The healing status of the repaired meniscus was classified as complete healing, lax healing, scar tissue healing, and failed healing. Chondral lesions were reviewed using arthroscopic photographs, and clinical evaluation was based on the Lysholm knee scores and the Hospital for Special Surgery scores. There was no case with complete healing. Five knees had lax healing (symptomatic in 2 and asymptomatic in 3); 4, scar tissue healing (asymptomatic in all 4); and 2, failed healing (symptomatic in 1 and asymptomatic in 1). Progression of the chondral lesion was found in 1 case. Mean Lysholm scores improved from 56.1 preoperatively (range, 41 to 71) to 83.0 at follow-up (range, 69 to 91; P = .003); mean Hospital for Special Surgery score also significantly increased, from 64.1 (range, 50 to 76) to 87.4 (range, 77 to 95; P = .003). Complete healing was not observed in this retrospective case series of posterior horn meniscus repairs performed by 2 surgeons using a single technique. Further research is needed to clarify why all patients showed clinical improvement despite findings of incomplete or failed healing on second-look arthroscopy. Treatment modalities for managing posterior root tears of the medial meniscus require further investigation to determine their efficacy.

Arthroscopic pullout suture repair of posterior root tear of the medial meniscus: radiographic and clinical results with a 2-year follow-up.

PubMed

Lee, Ju Hong; Lim, Young Jin; Kim, Ki Bum; Kim, Kyu Hyung; Song, Ji Hun

2009-09-01

This study was undertaken to document the short-term clinical efficacy of arthroscopic pullout suture repair in treating posterior root tears of the medial meniscus. From March 2004 to August 2006, 26 patients (27 knees) with posterior root tears of the medial meniscus were treated with arthroscopic pullout suture repair surgery by the senior author. Of these, 20 consecutive patients (21 knees) with a minimum of 2 years' follow-up treated by arthroscopic pullout suture repair were analyzed. Clinical results by use of the Lysholm knee and Hospital for Special Surgery scores and radiographic grade were evaluated, both preoperatively and at final follow-up. In addition, the second-look arthroscopic findings for 10 knees were analyzed. A radiographic evaluation using the criteria of Kellgren and Lawrence at final follow-up showed an increase in radiographic grade by 1 grade in only 1 knee. On the second-look arthroscopies performed in 10 knees (47.6%), all repaired menisci had healed completely without additional chondral lesions in the knee. The mean Hospital for Special Surgery scores improved from 61.1 preoperatively to 93.8 at final follow-up (P < .0001), and the mean preoperative Lysholm knee scores improved from 57.0 to 93.1 at final follow-up (P < .0001). Retear was found in 1 knee at the 6-month follow-up, and reoperation was performed with the same procedure used for the index surgery. Arthroscopic pullout suture repair is an effective treatment for alleviating meniscal symptoms in patients with a symptomatic posterior root tear of the medial meniscus with degenerated articular cartilage of less than grade III. In addition, no discernable degenerative arthritic changes were found in terms of radiographic features with our limited short-term follow-up. Level IV, therapeutic case series.

Neurovascular safety and clinical outcome of outside-in repair of tears of the posterior horn of the medial meniscus.

PubMed

Sobhy, Mohamed Hassan; AbouElsoud, Maged M Samy; Kamel, Ezzat Mohamed; Desouki, Ahmed Mohamed

2010-12-01

The purpose of this study was to evaluate the safety and clinical outcome of a new posterior approach for the known outside-in technique for repair of tears of the posterior horn of the medial meniscus (PHMM). First, a cadaveric study was performed on 6 cadaveric knees to assess the safety of a point just lateral to the semitendinosus tendon as an entry point for outside-in repair. Dissection was done to measure the clearance of this point to the nearby popliteal bundle and saphenous nerve. A prospective case series study was then performed to assess the clinical outcome of such an approach. We treated 41 consecutive cases with PHMM tears by the outside-in technique using a shuttle relay method through the same point. Clinical assessments, magnetic resonance imaging findings, Lysholm scores, and International Knee Documentation Committee subjective scores were recorded for all patients. After a minimum postoperative period of 2 years, all cases were re-evaluated and re-scored. The cadaveric study showed a mean clearance distance of 2.4 cm for the popliteal bundle and 4.6 cm for the saphenous nerve. The case series study was done on 41 meniscal repairs; 15 of 41 cases (37%) were performed in conjunction with anterior cruciate ligament reconstruction. There were 22 right knees (54%) and 19 left knees (36%). After a mean follow-up period of 27 months, patients showed a clinical success rate of 88% in terms of disappearance of pain, locking, and swelling, together with improved Lysholm scores (from 34 to 88) and International Knee Documentation Committee scores (from 25 to 88). These improvements were statistically significant (P < .05). An outside-in repair technique with a posterior entry central to the semitendinosus tendon was used safely with 88% satisfactory clinical results for treatment of PHMM tears. Level IV, therapeutic case series. Copyright © 2010 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Results of isolated lateral retinacular reconstruction for iatrogenic medial patellar instability.

PubMed

Sanchis-Alfonso, Vicente; Montesinos-Berry, Erik; Monllau, Joan Carles; Merchant, Alan C

2015-03-01

The aim of this study was to assess the outcomes of an isolated lateral retinaculum reconstruction for iatrogenic medial patellar instability (IMPI) in patients with continued pain after failed lateral retinacular release (LRR), including associated psychometric analysis. Pain was assessed using the visual analog scale (VAS) and disability was determined with the Lysholm scale. Psychological variables such as anxiety, depression, catastrophizing, and fear-of-movement beliefs were studied by using self-administered psychometric questionnaires. All 17 patients (13 women and 4 men) in this retrospective study had undergone LRR previously for anterior knee pain or lateral patellar instability. Four patients had undergone LRR plus proximal (Insall) realignment, and one had undergone LRR plus a medial tibial tubercle transfer. After their procedures, all had disabling symptoms. All patients underwent reconstructive surgery for IMPI. At a minimum follow-up of 2 years (range, 2 to 8 years), the mean preoperative VAS score was 7.6 (range, 5 to 9) and improved to 1.9 (range, 0 to 8) at the time of final follow-up (P < .001). The mean preoperative Lysholm score was 36.4 (range, 20 to 55), and the knee was described as bad (<65 points) in all cases. Postoperatively, it improved to 86.1 (range, 70 to 94) at final follow-up (P < .001). Before surgery, 4 patients (24%) had the clinical criteria for depression, 10 (59%) had anxiety, 7 (41%) had "catastrophizing" ideas concerning pain, and all (100%) had kinesiophobia (fear of movement). After surgery, none of the patients had depression or anxiety, none had catastrophizing ideation, and only 53% had kinesiophobia. Reconstruction of the deep transverse layer of the lateral retinaculum (LR) using a central strip of the iliotibial band for IMPI in patients with continued pain after failed LRR can successfully treat these severely disabled patients. Level IV, therapeutic case series. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Double-layer versus single-layer bone-patellar tendon-bone anterior cruciate ligament reconstruction: a prospective randomized study with 3-year follow-up.

PubMed

Mei, Xiaoliang; Zhang, Zhenxiang; Yang, Jingwen

2016-12-01

To evaluate the clinical results of a randomized controlled trial of single-layer versus double-layer bone-patellar tendon-bone (BPTB) anterior cruciate ligament (ACL) reconstruction. Fifty-eight subjects who underwent primary ACL reconstruction with a BPTB allograft were prospectively randomized into two groups: single-layer reconstruction (n = 31) and double-layer reconstruction (n = 27). The following evaluation methods were used: clinical examination, KT-1000 arthrometer measurement, muscle strength, Tegner activity score, Lysholm score, subjective rating scale regarding patient satisfaction and sports performance level, graft retear, contralateral ACL tear, and additional meniscus surgery. Forty-eight subjects (24 in single-layer group and 24 in double-layer group) who were followed up for 3 years were evaluated. Preoperatively, there were no differences between the groups. At 3-year follow-up, the Lachman and pivot-shift test results were better in the double-layer group (P = 0.019 and P < 0.0001, respectively). KT measurements were better in the double-layer group (mean 2.9 versus 1.5 mm; P = 0.0025). The Tegner score was also better in the double-layer group (P = 0.024). There were no significant differences in range of motion, muscle strength, Lysholm score, subjective rating scale, graft retear, and secondary meniscal tear. In ACL reconstruction, double-layer BPTB reconstruction was significantly better than single-layer reconstruction regarding anterior and rotational stability at 3-year follow-up. The results of KT measurements and the Lachman and pivot-shift tests were significantly better in the double-layer group, whereas there was no difference in the anterior drawer test results. The Tegner score was also better in the double-layer group; however, there were no differences in the other subjective findings.

Treatment Outcome of Reconstruction for Isolated Posterior Cruciate Injury: Subjective and Objective Evaluations.

PubMed

Ochiai, Satoshi; Hagino, Tetsuo; Senga, Shinya; Yamashita, Takashi; Haro, Hirotaka

2018-05-23

There is no consensus regarding the treatment method and outcome of posterior cruciate ligament (PCL) injury. We hypothesized that although the outcome of PCL reconstruction was favorable in terms of knee stability, the outcome was unsatisfactory in terms of patient-based assessments. The purpose of this study is to evaluate the treatment outcomes of knees that underwent reconstruction for PCL injury by subjective and objective assessments, and to analyze the correlation between various assessments. Twenty-three patients who underwent PCL reconstruction were studied. All reconstructions were performed arthroscopically by the single-bundle technique using a hamstring tendon autograft. Patients were evaluated clinically before operation and 24 months after operation using the 36-Item Short Form Health Survey (SF-36) which is a patient-based health assessment survey, Lysholm score, tibial translation ratio, Visual Analogue Scale (VAS) for pain, and range of motion (ROM) in the knee. The correlation of these assessment methods was analyzed. For the SF-36 survey, significant improvement was observed after operation in only 3 of 7 subscales compared with before surgery. Furthermore, the scores reached the national standard scores in only 3 subscales. While the Lysholm score and tibial translation ratio were improved significantly, no significant improvement in the VAS pain score was observed. For ROM assessment, approximately 30% of the patients had flexion restriction after operation, and the degree of restriction correlated positively with the VAS score. The present results indicated that although the outcome of PCL reconstruction was favorable in terms of knee stability and motor function, the outcome was unsatisfactory in terms of patient-based assessments. Since pain associated with flexion restriction appears to be a poor prognostic factor and there is a dissociation between subjective and objective assessments, improvement of the surgical method is necessary. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Early full weight-bearing versus 6-week partial weight-bearing after open wedge high tibial osteotomy leads to earlier improvement of the clinical results: a prospective, randomised evaluation.

PubMed

Schröter, S; Ateschrang, A; Löwe, W; Nakayama, H; Stöckle, U; Ihle, C

2017-01-01

Open wedge high tibial osteotomy is a widespread treatment option in patients with varus malalignment and medial compartment osteoarthritis. There is no standardised protocol for post-operative rehabilitation available. The purpose of this study was to compare two post-operative rehabilitation protocols and to evaluate the clinical outcome of early full weight-bearing after open wedge HTO. One hundred and twenty consecutive patients with varus malalignment and medial compartment osteoarthritis received an open wedge HTO using an angular locking plate fixation between December 2008 and December 2011. All patients were assigned randomly into one of two groups with different post-operative rehabilitation protocols (11-day vs. 6-week 20-kg partial weight-bearing). Clinical outcome was evaluated using established instruments (Lequesne, Lysholm, HSS and IKDC scores) preoperatively, 6, 12 and 18 months post-operatively. Deformity analysis was performed preoperatively and during follow-up. All clinical scores showed a significant pre- to post-operative improvement. After 6 months, there was a higher improvement in the group of early full weight-bearing. The difference between preoperative and 6-month follow-up for the group with early full weight-bearing and for the group with 20-kg PWB for 6 weeks was 28 ± 26 and 18 ± 22, respectively, for the Lysholm score and -5.0 ± 5.1 and -3.0 ± 3.6, respectively, for the Lequesne score. Early full weight-bearing (11-day 20-kg partial weight-bearing) after open wedge HTO without bone graft leads to earlier improvement of the clinical results and can be recommended for post-operative rehabilitation after open wedge HTO and fixation with an angular locking plate. Therapeutic study, Level I.

Multiple arthroscopic debridement and graft retention in septic knee arthritis after ACL reconstruction: a prospective case-control study.

PubMed

Abdel-Aziz, Ahmed; Radwan, Yasser A; Rizk, Ahmed

2014-01-01

This study was undertaken to prospectively analyse, at a mean five-year follow-up, the clinical, functional, and radiographic outcomes in patients who developed postoperative acute septic knee arthritis following anterior cruciate ligament (ACL) reconstruction using hamstring autograft. We also assessed the effect of multiple arthroscopic debridement and graft retention on the functional outcomes in comparison with the matched control group. From a consecutive case series of 2,560 ACL-injured patients who were treated with arthroscopic ACL reconstruction, we report on 24 cases with postoperative septic knee arthritis. These patients were individually matched for age, sex, comorbidity, body mass index (BMI) and preinjury Tegner activity scale in a ratio of 1/1. Clinical, laboratory, synovial fluid analysis and culture were performed. Arthroscopic debridement and graft retention was done for all cases, in addition to antibiotic therapy i.v.. A detailed physical examination, KT1000 laxity testing, Lysholm knee score, Tegner activity level scale, International Knee Documentation Committee (IKDC), and Knee Injury and Osteoarthritis Outcome Score (KOOS) were completed. In all cases, treatment of infection was successful after a median of three (range one to six) repeated arthroscopic graft debridement and retention, in addition to antibiotic therapy i.v.. At an average of five years follow-up, two patients had over five millimetres manual maximum side-to-side difference in laxity. There were no significant differences between groups regarding Lysholm score, IKDC and KOOS. Median final Tegner activity score was 5.5 versus 7 in the control group (p = 0.004). Complications included graft rupture in three patients, loss of range of motion in five, Sudeck's atrophy in one and moderate joint narrowing in two. There were no recurrences of septic arthritis or bone infection. Graft retention seems not only possible but appropriate in view of the experience presented in this article for postoperative septic knee arthritis using hamstring autograft. A potential residual complication is arthrofibrosis, which deserves maximum attention.

Cross-cultural translation of the Lysholm knee score in Chinese and its validation in patients with anterior cruciate ligament injury.

PubMed

Wang, W; Liu, L; Chang, X; Jia, Z Y; Zhao, J Z; Xu, W D

2016-10-19

The Lysholm Knee Score (LKS) is widely used and is one of the most effective questionnaires employed to assess knee injuries. Although LKS has been translated into multiple languages, there is no Chinese version even though China has the largest population of patients with knee-joint injuries. The objective of our study was to develop the Chinese version of LKS (C-LKS) and assess its reliability, validity and responsiveness in Chinese patients with anterior cruciate ligament (ACL) injuries. Study participants were mainly recruited among patients with ACL injuries scheduled for arthroscopic ACL reconstruction at our hospital. First, we developed the C-LKS in a five-step translation and cross-cultural adaptation procedure. Next, we calculated the Cronbach's alpha, intraclass correlation coefficient (ICC), Pearson's correlation coefficient (r), effect size (ES), and standardized response mean (SRM) to evaluate the reliability, validity, and responsiveness of C-LKS respectively. Overall, 126 patients with ACL injuries successfully completed the questionnaires. Acceptable internal consistency (Cronbach's alpha = 0.726) as well as excellent test-retest reliability (ICC = 0.935) was found for C-LKS. Good or moderate correlation (r = 0.514-0.837) was determined among C-LKS and International Knee Documentation Committee Subjective Knee Form (IKDC), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), physical subscales of SF-36; C-LKS also had fair or moderate correlation (r = 0.207-0.462) with the other subscales of SF-36, which adequately illustrated that good validity was included in C-LKS. In addition, good responsiveness was also observed in C-LKS (ES = 1.36,SRM = 1.26). We have shown that our developed C-LKS questionnaire is reliable, valid and responsible for the evaluation of Chinese-speaking patients with ACL injuries and it would be an effective instrument.

Double fixation of displaced patella fractures using bioabsorbable cannulated lag screws and braided polyester suture tension bands.

PubMed

Qi, Li; Chang, Cao; Xin, Tang; Xing, Pei Fu; Tianfu, Yang; Gang, Zhong; Jian, Li

2011-10-01

To evaluate the effectiveness and safety of a new double fixation technique for displaced patellar fractures using bioabsorbable cannulated lag screws and braided polyester suture tension bands. Fifteen patients (mean age of 46.2 years) with displaced transverse or comminuted patella fractures were enrolled in this prospective study. All of the patients were treated via the open reduction internal fixation (ORIF) procedure using bioabsorbable cannulated lag screws and braided polyester suture tension bands. The patients were followed post-surgery to evaluate (1) the time required for radiographic bone union, (2) the knee joint range of motion at the time of radiographic bone union, (3) the degree of pain assessed using the visual analogue scale (VAS), (4) the function of the knee using the Lysholm score and (5) the presence of any additional complications from the surgery. All of the patients were followed post-treatment for more than 1 year (range, 12-19 months; mean post-treatment follow up time, 14 months). The bone union of the fractures as seen radiographically occurred approximately 3 months from surgery in all cases without implant failure or redisplacement of the fractured site. The mean knee joint range of motion was from 0 to 134.6°, and the mean VAS score was 0.7 at the time of bone union. The mean Lysholm scores at the time of bone union and 12 months post-surgery were 86.7 and 95.7, respectively. No postoperative complications, such as infection, dislocation or breakage of the implants, were observed. Moreover, all of the patients returned to their previous activity level. This new double fixation technique using bioabsorbable cannulated lag screws and braided polyester suture tension bands resulted in satisfactory outcomes for patella fractures without any obvious complications. Copyright © 2011 Elsevier Ltd. All rights reserved.

[ARTHROSCOPIC TREATMENT OF ANTERIOR CRUCIATE LIGAMENT TIBIAL EMINENCE AVULSION FRACTURE IN ADOLESCENTS WITH EPIPHYSEAL UNCLOSURE].

PubMed

Liu, Yang; Sun, Xuebin; Zhang, Keyuan; Li, Gang; Ni, Jiati

2015-06-01

To evaluate the clinical results of arthroscopic treatment of anterior cruciate ligament (ACL) tibial eminence avulsion fractures in adolescents with epiphyseal unclosure. Between January 2011 and October 2013, 35 knees with ACL tibial eminence avulsion fractures (35 patients with epiphyseal unclosure) were arthroscopically treated with suture fixation. There were 25 males and 10 females, aged 8-16 years (mean, 14.7 years). The causes included sports injury in 24 cases, traffic accident injury in 9 cases, and daily life injury in 2 cases. According to Meyers-McKeever classification criteria, there were 27 cases of type II and 8 cases of type III. Five cases had meniscus injury. The preoperative the International Knee Documentation Committee (IKDC) score was 48.7 ± 3.2, and Lysholm score was 51.2 ± 4.5. The time from injury to operation was 2-16 days (mean, 5 days). Primary healing of incision was obtained in all patients. The mean follow-up time was 22.4 months (range, 12-32 months). Anatomical reduction was achieved in 28 cases and satisfactory reduction in 7 cases. X-ray films showed all fractures healing at last follow-up. There was no limb shortening deformity, varus knee, or valgus knee. Lachman test results were all negative. The other knees had normal range of motion except 1 knee with limited flexion, whose range of motion returned to 0-120° after treatment. At last follow-up, the IKDC score was significantly improved to 93.2 ± 4.1 (t = -53.442, P = 0.000), and the Lysholm score was significantly increased to 96.2 ± 2.5 (t = -56.242, P = 0.000). The arthroscopic fixation technique has satisfactory results for the reduction and fixation of ACL tibial eminence avulsion fracture in the adolescents with epiphyseal unclosure because of little trauma and quick recovery.

Can tibial plateau fractures be reduced and stabilised through an angiosome-sparing antero-lateral approach?

PubMed

Solomon, Lucian B; Boopalan, P R J V C; Chakrabarty, Adhiraj; Callary, Stuart A

2014-04-01

Tibial plateau fractures (TPFs) are an independent, non-modifiable risk factor for surgical site infections (SSIs). Current antero-lateral approaches to the knee dissect through the anterior tibial angiosome (ATA), which may contribute to a higher rate of SSIs. The aim of this study was to develop an angiosome-sparing antero-lateral approach to allow reduction and fixation of lateral TPFs and to investigate its feasibility in a consecutive cohort. Twenty cadaveric knees were dissected to define the position of the vessels supplying the ATA from the lateral tibial condyle to the skin perforators. Based on these results, an angiosome-sparing surgical approach to treat lateral TPFs was developed. Fifteen consecutive patients were subsequently treated through this approach. Clinical outcomes included assessment of SSI and Lysholm score. Fracture healing and stability were assessed using the Rasmussen score and radiostereometric analysis (RSA). At the latest follow-up between 1 and 4 years, there was no report of SSI. Nine patients (60%) had good or excellent Lysholm scores. The mean Rasmussen score at final follow-up was 17 (median 18, range 14-18) with 10 patients (66%) graded as excellent. Fracture fragment migration measured using RSA was below 2mm in all cases. This study has demonstrated that an angiosome-sparing antero-lateral approach to the lateral tibial plateau is feasible. Adequate stability of these fracture types was achieved by positioning a buttress plate away from the bone and superficial to the regional fascial layer as an 'internal-external fixator'. The angiosome-sparing approach developed was able to be used in a prospective cohort and the clinical results to date are encouraging. Future clinical studies need to investigate the potential benefits of this surgical approach when compared with the previously described antero-lateral approaches. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Outcome of low profile mesh plate in management of comminuted displaced fracture patella.

PubMed

Singer, Mohamed S; Halawa, Abdelsamie M; Adawy, Adel

2017-06-01

To assess the clinical results of using mesh plate in management of displaced comminuted fracture patella. Between January 2014 and October 2015, nine patients with closed displaced comminuted fracture patella were fixed using mesh plate and 2mm mini screws. All fractures united after an average of 10 weeks. At final follow-up of an average 19.6 months, average postoperative Lysholm score was 89.1±4.9, and average Postoperative Böstman scale was 27.2±3.1. No hardware related complications were recorded. Low profile mesh plate is a good option in management of comminuted fracture patella with good clinical outcome. This new surgical technique may be particularly useful in comminuted fractures when patellectomy would otherwise be considered. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of strength and neuromuscular training on functional performance in athletes after partial medial meniscectomy.

PubMed

Zhang, Xiaohui; Hu, Min; Lou, Zhen; Liao, Bagen

2017-02-01

The aims of this study were to determine an effective knee function rehabilitation program for athletes undergoing partial medial meniscectomy. Participants were randomly assigned to neuromuscular training (NT) or strength training (ST) group and subjected to functional assessments before surgery and again at 4, and 8 weeks post hoc . Functional knee assessment, such as Lysholm knee scoring, star excursion balance, and BTE PrimusRS isokinetic performance tests were evaluated in each group. All postoperational symptoms were significantly improved after 4 and 8 weeks of NT and ST. Both NT and ST programs showed effective knee function recovery seen as an increase in muscular strength and endurance. However, the NT program showed the most significant functional improvement of dynamic balance and coordination.

Satisfactory knee function after single-stage posterolateral corner reconstruction in the multi-ligament injured/dislocated knee using the anatomic single-graft technique.

PubMed

Sanders, Thomas L; Johnson, Nick R; Pareek, Ayoosh; Krych, Aaron J; Marx, Robert G; Stuart, Michael J; Levy, Bruce A

2018-04-01

Increasing importance has been placed on the posterolateral corner (PLC) in maintaining varus and rotational stability of the knee. The goal of this study was to evaluate knee function and clinical stability following a single-graft PLC reconstruction technique and identify factors associated with poor knee function. This study identified patients with a multi-ligament knee injury between 2006 and 2013. Patients who received a single-graft fibular collateral ligament and PLC reconstruction with a single-stage surgery during the study period and had a minimum follow-up of 2 years after surgery were included. Functional outcomes were assessed using Lysholm and IKDC scores. Varus and rotational knee laxity and range of motion were assessed using physical examination. The final study cohort included 61 patients who underwent PLC reconstruction using a single-graft technique. The mean IKDC score was 74.1 (± 22.3) and the mean Lysholm score was 80.3 (± 21.8) at mean follow-up of 3.8 years (range 2-9 years). Mean range of motion at final follow-up measured from 0° to 126° [range flexion: 95-145, range extension: 0-5]. Fifty-eight patients (95%) had grade 0 varus laxity in full knee extension, and 54 patients (88.5%) had grade 0 varus laxity at 30° of knee flexion. Female gender was associated with a lower postoperative IKDC score (p = 0.04). Surgical treatment of the PLC using a single-graft technique can result in satisfactory knee function and stable physical examination findings at minimum 2 years after surgery. Female gender was predictive of poor knee function after PLC reconstruction. Surgical treatment of PLC injuries should be individualized based on the timing of surgery, specific injured knee structures, and physical examination findings. This study helps validate the use of a single-graft technique for PLC reconstruction and can be used to help counsel patients about expected knee function after surgical treatment of PLC injuries. Level of evidence IV.

Treatment of deep hyalin cartilage defects with autologous perichondrial grafts.

PubMed

Bruns, J; Steinhagen, J

2003-07-01

Perichondrial transplantation was performed in 29 patients suffering from a deep chondral lesion with different etiologies. Only those patients with a cartilage lesion in the knee joint were included. Patients were initially and postoperatively examined using the Lysholm- and HSS-Score. In most of the patients (20/29) trauma and the recurrence of osteochondrosis dissecans (6/29) were the cause of the cartilage lesion. Most often the medial femoral condyle (19/29) and, secondly, the lateral femoral condyle (5/29) were involved. In six patients additional therapeutic measures (ACL-plasty, n = 2; high tibial osteotomy because of varus mal-alignment, n = 4) had to be adopted. Follow-up examination was possible in 26/29 patients after a minimum postoperative period of 12 months. All patients exhibited a distinct and significant increase in both the Lysholm and the HSS-score. A follow-up after a minimum of 24 months was possible in 13/29 patients. Even these patients exhibited a distinct and significant improvement. Multiple follow-up examinations in 9/29 patients demonstrated maintenance of the first postoperative results obtained after one postoperative year for a maximum of 49 months in most of the patients. Only in one female patient, implantation of a semi-constrained total knee replacement was necessary because of osteoarthrosis resulting from crystal arthropathy (chondrocalcinosis). It was possible to obtain biopsies from three patients at the time osteosynthetic material was removed. In all cases hyaline-like cartilage was histologically observed. In the treatment of selected patients suffering from a circumscript cartilaginous lesion resulting from trauma or the recurrence of osteochondritis dissecans with a concomitant cartilage lesion but without major signs of osteoarthritis, perichondrial grafting can achieve acceptable clinical results, after a short follow-up period. In order to achieve satisfying results a good selection of patients and additional treatment of other articular disorders, such as ACL-instability or axial mal-alignment, is necessary. Further studies have to be undertaken to evaluate the durability of these results over a longer period of time to see if osteoarthrosis can be avoided.

Influence of age on clinical outcomes of three-dimensional transfer of the tibial tuberosity for patellar instability with patella alta.

PubMed

Otsuki, Shuhei; Nakajima, Mikio; Fujiwara, Kenta; Okamoto, Yoshinori; Iida, Go; Murakami, Tomohiko; Neo, Masashi

2017-08-01

To evaluate the clinical outcomes of three-dimensional (3D) transfer of the tibial tuberosity for patellar instability with patella alta, with a focus on the influence of age at initial surgery. Three-dimensional surgery was performed on 28 knees with a mean follow-up of 46 months. Patients were separated into three groups based on the age at initial surgery: group A, 10 knees and an average age of 16.3 ± 1.8 (14-19) years; group B, 10 knees and an average age of 22.1 ± 2.5 (20-28) years; and group C, eight knees and an average age of 44.0 ± 2.2 (40-46) years. Patellofemoral geometry improvement focused on patella alta by determining the Insall-Salvati ratio and Caton-Deschamps index, rotational malalignment by measuring the tibial tubercle-trochlear groove (TT-TG) distance, and lateral patellar subluxation by measuring the patellar tilt. Clinical outcomes were evaluated by the Lysholm and Kujala scores, which were compared before and after surgery. Cartilage degeneration was evaluated by the International Cartilage Repair Society grading system at initial arthroscopy. The patellar height, TT-TG, and patellar tilt significantly improved in all groups postoperatively (p < 0.05). The Lysholm and Kujala scores also significantly improved postoperatively; however, both scores were lower in group C than in the other groups (p < 0.05). Particularly, pain scores were more severe in group C than in the other groups, and the severity of cartilage degeneration correlated with the pain scores (p < 0.05). Cartilage damage differed significantly between the groups at initial arthroscopy; particularly, group C included grades III and IV cartilage degeneration (p < 0.05). Age at initial surgery may be the predicting factor for poor clinical outcomes of 3D transfer surgery. The clinical outcome may depend on the age at surgery, which correlated with cartilage damage; thus, surgeons should be given this information when patients are considered undergoing patella surgery. Therapeutic case series, Level IV.

Femoral press-fit fixation in ACL reconstruction using bone-patellar tendon-bone autograft: results at 15 years follow-up.

PubMed

Widuchowski, Wojciech; Widuchowska, Malgorzata; Koczy, Bogdan; Dragan, Szymon; Czamara, Andrzej; Tomaszewski, Wieslaw; Widuchowski, Jerzy

2012-06-27

If anterior cruciate ligament (ACL) reconstruction is to be performed, decision regarding graft choice and its fixation remains one of the most controversial. Multiple techniques for ACL reconstruction are available. To avoid disadvantages related to fixation devices, a hardware-free, press-fit ACL reconstruction technique was developed. The aim of this study was to evaluate clinical outcome and osteoarthritis progression in long term after ACL reconstruction with central third patellar-tendon autograft fixed to femur by press-fit technique. Fifty two patients met inclusion/excusion criteria for this study. The patients were assessed preoperatively and at 15 years after surgery with International Knee Documentation Committee Knee Ligament Evaluation Form, Lysholm knee score, Tegner activity scale and radiographs. Good overall clinical outcomes and self-reported assessments were documented, and remained good at 15 years. The mean Lysholm and Tegner scores improved from 59.7 ± 18.5 and 4.2 ± 1.0 preoperatively to 86.4 ± 5.6 (p = 0.004) and 6.9 ± 1.4 (p = 0.005) respectively at follow-up. The IKDC subjective score improved from 60.1 ± 9.2 to 80.2 ± 8.1 (p = 0.003). According to IKDC objective score, 75% of patients had normal or nearly normal knee joints at follow-up. Grade 0 or 1 results were seen in 85% of patients on laxity testing. Degenerative changes were found in 67% of patients. There was no correlation between arthritic changes and stability of knee and subjective evaluation (p > 0.05). ACL reconstruction with patellar tendon autograft fixed to femur with press-fit technique allows to achieve good self-reported assessments and clinical ligament evaluation up to 15 years. Advantages of the bone-patellar-tendon-bone (BPTB) press-fit fixation include unlimited bone-to-bone healing, cost effectiveness, avoidance of disadvantages associated with hardware, and ease for revision surgery. BPTB femoral press-fit fixation technique can be safely applied in clinical practice and enables patients to return to preinjury activities including high-risk sports.

Torsional osteotomies of the tibia in patellofemoral dysbalance.

PubMed

Dickschas, Jörg; Tassika, Aliki; Lutter, Christoph; Harrer, Jörg; Strecker, Wolf

2017-02-01

Anterior knee pain or patellofemoral instability is common symptom of patellofemoral dysbalance or maltracking. Tibial torsional deformities can be the reason of this pathology. After appropriate diagnostic investigation, the treatment of choice is a torsional osteotomy. This study addresses the diagnostic investigation, treatment, and the outcome of torsional osteotomies of the tibia. Does this treatment result in patellofemoral stability and provide pain relief? Forty-nine tibial torsional osteotomies were included. The major symptoms were patellofemoral instability in 19 cases and anterior knee pain in 42 cases. In addition to clinical and radiographic analysis, a torsional angle CT scan was performed pre-operatively. A visual analog scale (VAS), the Japanese Knee Society score, the Tegner activity score, and the Lysholm score were assessed pre-operatively and at the 42-month follow-up. Mean tibial external torsion was 47.4° (SD 5.41; range 37°-66°; standard value 34°). Surgical treatment consisted of an acute supratuberositary tibial internal torsional osteotomy (mean 10.8°; SD 3.01°; range 5°-18°). At the follow-up investigation, the Tegner activity score was increased 0.4 points (p value 0.014) from 3.9 (SD 1.33; range 2-7) to 4.3 (SD 1.25; range 0-7). The Lysholm score increased 26 points (SD 16.32; p value 0.001) from 66 (SD 14.94; range 32-94) to 92 (SD 9.29; range 70-100) and the Japanese Knee Society score increased 18 points (SD 14.70; p value 0.001) from 72 (SD 13.72, range 49-100) to 90 (SD 9.85, range 60-100). VAS was reduced 3.4 points (SD 2.89; p value 0.001) from 5.7 (SD 2.78; range 0-10) to 2.3 (SD 1.83; range 0-7). As regards patellofemoral instability, no redislocation occurred in the follow-up period. The results of this study show that in cases of tibial maltorsion, a torsional osteotomy can lead to patellofemoral stability and pain relief, and should be considered as a treatment option. The improved clinical scores in the present investigation show the value of the procedure. Level of evidence Level IV.

International knee documentation committee knee survey use after anterior cruciate ligament reconstruction: a 2005-2012 systematic review and world region comparison.

PubMed

Wera, Jeffrey C; Nyland, John; Ghazi, Cameron; MacKinlay, Kenneth G W; Henzman, R Cameron; Givens, Justin; Brand, Jefferson C

2014-11-01

The purpose of this review was to evaluate International Knee Documentation Committee (IKDC) survey use after anterior cruciate ligament reconstruction compared with other surveys and determine evidence levels and methodologic study quality by world region. The Medline database was searched from January 2005 through December 2012. We identified 421 studies and 33 surveys. Europe and Australia had more objective and subjective IKDC form use (χ(2) = 9.6, P = .047). Europe and Asia had more objective IKDC form use (χ(2) = 19.4, P = .001). Asia had more Lysholm knee scale use (χ(2) = 29.9, P < .0001). Europe had more Tegner Activity Level scale (χ(2) = 31.7, P < .0001) and Knee Injury and Osteoarthritis Outcome Score (χ(2) = 20.5, P < .0001) use. North America and Australia had more Cincinnati or Noyes knee rating scale use (χ(2) = 21, P < .0001). Asia and Australia had more studies with greater than 60 subjects (χ(2) = 24.4, P = .018). Europe had more studies with greater than 24 months' follow-up (χ(2) = 18.4, P = .018). Asia had more studies with adequate surgical descriptions (χ(2) = 33.2, P < .0001). North America had more studies with well-described rehabilitation (χ(2) = 18.2, P = .02). Europe had more studies with confirmed recruitment (χ(2) = 12.9, P = .012). Australia and North America had more studies with confirmed independent investigators (χ(2) = 11.1, P = .026). Europe had more studies with greater than 80% recruitment (χ(2) = 16.0, P = .04). Methodologically stronger studies used the objective IKDC survey (P < .0001), the objective and subjective IKDC survey (P = .002), or the Cincinnati or Noyes scale (P = .002). This group also made greater use of the Tegner scale (P = .013). Objective and subjective IKDC form use is comparable with Lysholm and Tegner scale use. Objective and subjective IKDC form use in combination with the Tegner Activity Level scale is recommended. Level IV, systematic review of Level I-IV studies. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Functional Outcome and Graft Retention in Patients With Septic Arthritis After Anterior Cruciate Ligament Reconstruction: A Systematic Review.

PubMed

Makhni, Eric C; Steinhaus, Michael E; Mehran, Nima; Schulz, Brian S; Ahmad, Christopher S

2015-07-01

To provide a comprehensive review of clinical and functional outcomes after treatment for septic arthritis after anterior cruciate ligament reconstruction. A systematic review of the literature was performed. Two reviewers assessed and confirmed the methodologic quality of each study. Studies that met the inclusion criteria were assessed for pertinent data, and when available, similar outcomes were combined to generate frequency-weighted means. Nineteen studies met the inclusion and exclusion criteria for this review, reporting on a total of 203 infected knees. The mean age was 27.5 years and the mean length of follow-up was 44.2 months, with male patients comprising 88% of the population. Hamstring and bone-patellar tendon-bone autografts were used in 63% and 33% of patients, respectively, with 78% of patients retaining their grafts. The studies reported mean flexion and extension deficits of 5.8° and 1.0°, respectively, and laxity testing showed a mean difference of 1.9 mm. The studies reported mean Lysholm, International Knee Documentation Committee, and Tegner scores of 82.1, 68.2, and 5.6, respectively. Of the patients, 83% reported an ability to return to activities of daily living whereas 67% reported a return to their preinjury level of athletics. Evidence of new degenerative changes was seen in 22% of patients. Septic arthritis after anterior cruciate ligament reconstruction remains a very infrequent event, affecting 0.5% of patients. On average, outcomes in these patients are comparable with those in patients in whom infection does not develop, including postoperative range of motion, residual instability, Lysholm scores, and return to preinjury level of activity. These patients do exhibit decreased International Knee Documentation Committee scores compared with patients without septic arthritis, however. The impact of this differential is not clear, but this scoring difference suggests that septic arthritis may be associated with more severe symptoms and reduced functional outcomes. In addition, there is limited evidence suggesting that septic arthritis leads to early degenerative changes found on imaging. Level IV, systematic review of Level III and IV studies. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Outcomes after repair of chronic bucket-handle tears of medial meniscus.

PubMed

Espejo-Reina, Alejandro; Serrano-Fernández, José Miguel; Martín-Castilla, Belén; Estades-Rubio, Francisco Javier; Briggs, Karen K; Espejo-Baena, Alejandro

2014-04-01

The purpose of this study was to determine the outcomes after repair of chronic bucket-handle medial meniscal tears by use of magnetic resonance imaging, clinical examination, and patient-reported outcomes. A retrospective review of patients with chronic bucket-handle medial meniscal tears that had been repaired with meniscal sutures was undertaken. The following criteria for inclusion were adopted: minimum tear length of 2 cm and chronic medial meniscal tear identified at the time of arthroscopy. The tears were susceptible to dislocation with probing. Data collected included demographic, clinical, radiologic, and surgical data. Postoperative healing was assessed with the clinical criteria of Barrett et al. The International Knee Documentation Committee rating, Lysholm score, and Tegner activity level were determined, and postoperative magnetic resonance imaging was used to evaluate healing in accordance with the criteria of Henning et al. Twenty-four patients fulfilled the inclusion criteria. The mean time from injury to surgery was 10 months (range, 2 to 60 months). Sixteen patients underwent anterior cruciate ligament reconstruction, 1 patient underwent posterior cruciate ligament reconstruction, and 6 patients underwent meniscus repair only. A median of 5 sutures (range, 3 to 6 sutures) were used for repair. Four cases (all of which had undergone meniscus repair only) required revision. Complete healing was achieved in 83% of cases according to the criteria of Barrett et al. The mean follow-up time was 48 months (range, 24 to 112 months). An International Knee Documentation Committee rating of A or B was achieved in the 20 patients who did not require revision. The median Lysholm score was 95 (range, 92 to 100). The median Tegner activity level before injury was 7, and it remained unchanged after surgery in all cases. This study showed that repair of chronic bucket-handle meniscal tears can lead to good clinical outcomes and a relatively low (17%) failure rate. In addition, repairs of isolated meniscal tears had a significantly higher risk of failure than repairs performed in conjunction with anterior cruciate ligament reconstruction. Level IV, therapeutic case series. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Arthroscopic Transtibial Pullout Repair for Posterior Medial Meniscus Root Tears: A Systematic Review of Clinical, Radiographic, and Second-Look Arthroscopic Results.

PubMed

Feucht, Matthias J; Kühle, Jan; Bode, Gerrit; Mehl, Julian; Schmal, Hagen; Südkamp, Norbert P; Niemeyer, Philipp

2015-09-01

To systematically review the results of arthroscopic transtibial pullout repair (ATPR) for posterior medial meniscus root tears. A systematic electronic search of the PubMed database and the Cochrane Library was performed in September 2014 to identify studies that reported clinical, radiographic, or second-look arthroscopic outcomes of ATPR for posterior medial meniscus root tears. Included studies were abstracted regarding study characteristics, patient demographic characteristics, surgical technique, rehabilitation, and outcome measures. The methodologic quality of the included studies was assessed with the modified Coleman Methodology Score. Seven studies with a total of 172 patients met the inclusion criteria. The mean patient age was 55.3 years, and 83% of patients were female patients. Preoperative and postoperative Lysholm scores were reported for all patients. After a mean follow-up period of 30.2 months, the Lysholm score increased from 52.4 preoperatively to 85.9 postoperatively. On conventional radiographs, 64 of 76 patients (84%) showed no progression of Kellgren-Lawrence grading. Magnetic resonance imaging showed no progression of cartilage degeneration in 84 of 103 patients (82%) and showed reduced medial meniscal extrusion in 34 of 61 patients (56%). On the basis of second-look arthroscopy and magnetic resonance imaging in 137 patients, the healing status was rated as complete in 62%, partial in 34%, and failed in 3%. Overall, the methodologic quality of the included studies was fair, with a mean modified Coleman Methodology Score of 63. ATPR significantly improves functional outcome scores and seems to prevent the progression of osteoarthritis in most patients, at least during a short-term follow-up. Complete healing of the repaired root and reduction of meniscal extrusion seem to be less predictable, being observed in only about 60% of patients. Conclusions about the progression of osteoarthritis and reduction of meniscal extrusion are limited by the small portion of patients undergoing specific evaluation (44% and 35% of the study group, respectively). Level IV, systematic review of Level III and IV studies. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Cam impingement of the posterior femoral condyle in medial meniscal tears.

PubMed

Suganuma, Jun; Mochizuki, Ryuta; Yamaguchi, Kenji; Inoue, Yutaka; Yamabe, Eikou; Ueda, Yoshiyuki; Fujinaka, Tarou

2010-02-01

The aim of this study was to compare the results of meniscal repair of the medial meniscus with or without decompression of the posterior segment of the medial meniscus for the treatment of posteromedial tibiofemoral incongruence at full flexion (PMTFI), which induces deformation of the posterior segment on sagittal magnetic resonance imaging (MRI). For more than 2 years, we followed up 27 patients with PMTFI who were classified into the following 2 groups. Group 1 included 8 patients (5 male joints and 3 female joints) with a medial meniscal tear with instability at the site of the tear who underwent meniscal repair. The mean age was 23.6 years. Group 2 included 19 patients (16 male joints and 3 female joints) who had a meniscal tear with instability at the site of the tear and underwent meniscal repair and decompression. The mean age was 26.5 years. In decompression of the posterior segment, redundant bone tissue on the most proximal part of the medial femoral condyle was excised. The patients were assessed by use of the Lysholm score, sagittal MRI at full flexion, and arthroscopic examination. There were no statistical differences in mean Lysholm score between the 2 groups before surgery, but the mean score in group 2 was significantly higher than that in group 1 after surgery. Meniscal deformation of the posterior segment at full flexion on MRI disappeared in all cases after decompression. On second-look arthroscopy, the rate of complete healing at the site of the tear was 0% in group 1 but 57% in group 2, and it was significantly different between these groups. The addition of decompression of the posterior segment of the medial meniscus to meniscal repair of knee joints with PMTFI allowed more room for the medial meniscus to accommodate and improved both function of the knee joint and the rate of success of repair of isolated medial meniscal tears in patients who regularly performed full knee flexion. (c) 2010 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Medial meniscus allograft transplantation using a modified bone plug technique: clinical, radiologic, and arthroscopic results.

PubMed

Ha, Jeong Ku; Sung, Jung Hwan; Shim, Jae Chan; Seo, Jeong Gook; Kim, Jin Goo

2011-07-01

To determine clinical, radiologic, and arthroscopic results of our meniscus allograft transplantation (MAT) by use of modified bone plug technique, which permits easy passage of the allograft by reducing the size of the posterior bone plug. From December 2004 to December 2008, 22 consecutive patients (20 men and 2 women) with a mean age of 35.9 years underwent medial MAT with the modified bone plug method. The Lysholm score and International Knee Documentation Committee subjective knee score were documented. Joint space narrowing and Kellgren-Lawrence grade changes were evaluated on radiographs, and graft healing status, arthrosis changes in cartilage, and meniscal extrusion were investigated by magnetic resonance imaging (MRI). The mean follow-up was 24.9 months. The mean Lysholm score improved significantly, from 68.2 to 89.7 (P = .002). The International Knee Documentation Committee subjective knee score improved significantly, from 60.3 to 85.4 (P = .003). Joint space narrowing was insignificant, and arthrosis progression was observed in 3 of 22 cases (13.6%) on radiographs. On MRI, complete healing of the grafts was observed in 18 cases (100%), 15 cases (83.3%), and 17 cases (94.4%) at the anterior root, posterior root, and meniscal rim, respectively. Mean meniscal extrusion was 4.35 ± 1.76 mm, and arthrosis progression was observed in 4 of 18 cases (22.2%). During second-look arthroscopy, complete healing of the grafts was observed in 11 cases (100%), 9 cases (81.8%), and 10 cases (90.9%) at the anterior root, posterior root, and meniscal rim, respectively. Cartilage degeneration was advanced in 4 cases (36.4%). No significant correlations were found between meniscal extrusion and other outcomes. Our modified bone plug method was an effective surgical method. MRI and second-look arthroscopic examinations showed sound evidence of graft healing. Meniscal extrusion was observed in most cases but was not correlated with other clinical and radiologic outcomes. Level IV, therapeutic case series. Copyright © 2011 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Return to sports after autogenous osteochondral mosaicplasty of the femoral condyles: 25 cases at a mean follow-up of 9 years.

PubMed

Cognault, J; Seurat, O; Chaussard, C; Ionescu, S; Saragaglia, D

2015-05-01

Autogenous osteochondral mosaicplasty is the most common cartilage restoration technique in standard clinical practice. The purpose of this study was to evaluate the return to sports 9 years after mosaicplasty of the femoral condyles. The long-term results of an osteochondral autograft show that patients can regain their pre-injury activity level. This study is based on a series of 25 patients with a mean age of 28.9 years (range, 16-44 years) who had stage 3 or 4 chondral lesions of the femoral condyles (according to the ICRS or ICRS-OCD scores). The origin of the lesion was osteochondritis dissecans (13 knees), osteochondral fracture sequelae (ten knees), or aseptic osteonecrosis (two knees). The average size of the lesion was 2.11 ± 0.9 cm(2). Ten patients (40%) had an associated procedure during the osteochondral autograft. The patients were assessed clinically (IKDC and Lysholm-Tegner scores) and radiographically by a reviewer independent of the team of operators. All patients were re-examined at a mean follow-up of 9 years (range, 6-15 years), with 84% satisfied or very satisfied with the procedure. The average IKDC was 74.5 ± 18.5 points. The average Lysholm score was 87.3 ± 11.6 points. The average Tegner score ranged from 6.35 ± 1.53 points prior to surgery to 5.60 ± 1.64 points after surgery (P = 0.001). The average loss was 0.64 points for patients whose presurgery Tegner score was greater than or equal to 7 (P = 0.019) and 0.3 points if lower than 7. The radiologic evaluation of 21 patients showed complete osteointegration of the grafts in 90% of cases. The results of the femoral condyle mosaic autografts are satisfactory, a mean of 9 years after surgery. The most active patients lowered their activity level while the more sedentary did not have to adapt their lifestyle. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Decreased synovial fluid ghrelin levels are linked with disease severity in primary knee osteoarthritis patients and are increased following laser therapy.

PubMed

Zou, Yu-Cong; Deng, Hong-Yu; Mao, Zheng; Zhao, Chang; Huang, Ju; Liu, Gang

2017-07-01

Ghrelin has been proved to inhibit inflammation and promote cartilage growth. So far, its role in patients with primary knee osteoarthritis has not been investigated. The current study was performed to explore the serum and synovial ghrelin levels as well as the relationship between ghrelin levels and disease severity in primary knee OA patients. 52 primary knee OA patients were recruited in the study. 52 sex and age-matched patients visiting our hospital for regular body check were selected as controls. The serum and synovial fluid ghrelin levels were examined by enzyme linked immunosorbent assay (ELISA) before treatment, one week and four weeks after laser therapy, respectively. The inflammation markers IL-6 and TNF-α were also investigated. The radiographic progression was assessed by Kellgren-Lawrence (K-L) grade scale and the symptomatic severity was evaluated by visual analog scale (VAS), Lequesne index and Lysholm scores. The Receiver Operating Characteristic (ROC) analysis curve was conducted to test the diagnostic value of ghrelin, IL-6 and TNF-α for radiographic progression. No significant difference of serum ghrelin levels was found between knee OA patients and healthy controls. Synovial fluid ghrelin concentrations were significantly negatively correlated with K-L grading (r=-0.591, P<0.001).Attenuated synovial fluid ghrelin levels were also related to clinical severity determined by Lequesne index (r=-0.308, P=0.025),VAS scores (r=-0.591, P<0.001) and Lysholm scores (r=0.381, P=0.005).In addition, ghrelin levels were also negatively associated with TNF-α (r=-0.424, P=0.002) and IL-6 concentrations (r=-0.428, P=0.002). ROC curve analysis demonstrated that ghrelin exhibited more diagnostic value than IL-6 and TNF-α for assessing radiographic progression in medium-late stage. Decreased synovial fluid ghrelin levels are related to disease severity in patients with primary osteoarthritis and are increased following laser therapy. Local application of ghrelin may serve as an adjunctive therapy for knee OA. Copyright © 2017. Published by Elsevier B.V.

Anterior cruciate ligament reconstruction with 4-strand hamstring autograft and accelerated rehabilitation: a 10-year prospective study on clinical results, knee osteoarthritis and its predictors.

PubMed

Janssen, Rob P A; du Mée, Arthur W F; van Valkenburg, Juliette; Sala, Harm A G M; Tseng, Carroll M

2013-09-01

Analysis of long-term clinical and radiological outcomes after anterior cruciate ligament (ACL) reconstruction with special attention to knee osteoarthritis and its predictors. A prospective, consecutive case series of 100 patients. Arthroscopic transtibial ACL reconstruction was performed using 4-strand hamstring tendon autografts with a standardized accelerated rehabilitation protocol. Analysis was performed preoperatively and 10 years postoperatively. Clinical examination included Lysholm and Tegner scores, IKDC, KT-1000 testing (MEDmetric Co., San Diego, CA, USA) and leg circumference measurements. Radiological evaluation included AP weight bearing, lateral knee, Rosenberg and sky view X-rays. Radiological classifications were according to Ahlbäck and Kellgren & Lawrence. Statistical analysis included univariate and multivariate logistic regressions. RESULTS CLINICAL OUTCOME: A significant improvement (p < 0.001) between preoperative and postoperative measurements could be demonstrated for the Lysholm and Tegner scores, IKDC patient subjective assessment, KT-1000 measurements, pivot shift test, IKDC score and one-leg hop test. A pivot shift phenomenon (glide) was still present in 43 (50%) patients and correlated with lower levels of activity (p < 0.022). Radiological outcome: At follow-up, 46 (53.5%) patients had signs of osteoarthritis (OA). In this group, 33 patients (72%) had chondral lesions (≥grade 2) at the time of ACL reconstruction. A history of medial meniscectomy before or at the time of ACL reconstruction increased the risk of knee OA 4 times (95% CI 1.41-11.5). An ICRS grade 3 at the time of ACL reconstruction increased the risk of knee OA by 5.2 times (95% CI 1.09-24.8). There was no correlation between OA and activity level (Tegner score ≥6) nor between OA and a positive pivot shift test. Transtibial ACL reconstruction with 4-strand hamstring autograft and accelerated rehabilitation restored anteroposterior knee stability. Clinical parameters and patient satisfaction improved significantly. At 10-year follow-up, radiological signs of OA were present in 53.5 % of the subjects. Risk factors for OA were meniscectomy prior to or at the time of ACL reconstruction and chondral lesions at the time of ACL reconstruction. II.

Translation and cross-cultural adaptation of the anterior cruciate ligament-return to sport after injury (ACL-RSI) scale into Turkish.

PubMed

Harput, Gulcan; Tok, Damla; Ulusoy, Burak; Eraslan, Leyla; Yildiz, Taha Ibrahim; Turgut, Elif; Demirci, Serdar; Duzgun, Irem; Tunay, Volga Bayrakci; Baltaci, Gul; Ergun, Nevin

2017-01-01

To translate and culturally adapt the anterior cruciate ligament-return to sport after injury (ACL-RSI) scale into Turkish (ACL-RSI-Tr) and examine and evaluate the psychometric properties of the Turkish version in individuals who have undergone anterior cruciate ligament (ACL) reconstruction. The ACL-RSI was forward- and back-translated, culturally adapted and validated on ninety-three Turkish individuals who had undergone ACL reconstruction (5 females, 88 males; age 28.7 ± 8.6 years; body mass 80.1 ± 13.9 kg; height 178.8 ± 6.9 cm; body mass index 25.0 ± 3.7 kg/m 2 ). All patients completed the translated ACL-RSI, Tampa Scale of Kinesiophobia (TSK), Knee injury and Osteoarthritis Outcome Score (KOOS) and International Knee Documentary Committee (IKDC) and Lysholm questionnaires. We then analysed the internal consistency, reliability and validity of the newly formed ACL-RSI-Tr scale. The ACL-RSI-Tr showed good internal consistency (Cronbach's alpha 0.86) and test-retest reliability (ICC 0.92) and was significantly correlated with the KOOS 'quality of life' (r = 0.58, p < 0.002), 'symptoms and stiffness' (r = 0.35, p = 0.001), 'pain' (r = 0.49, p < 0.001), 'sports' (r = 0.44, p < 0.001) and 'daily life' (r = 0.42, p < 0.001) subscales. The ACL-RSI-Tr also correlated significantly with the TSK (r = - 0.45, p < 0.001), Lysholm (r = 0.45, p < 0.001) and IKDC (r = 0.44, p < 0.001) scores. The Turkish version of the ACL-RSI scale was valid, discriminant, consistent and reliable in patients who had undergone ACL reconstruction. This score could be useful to evaluate the effect of psychological factors on return to sport following ACL surgery. Diagnostic study, Level I.

Reconstruction for chronic grade-II posterior cruciate ligament deficiency in Malaysian military personnel.

PubMed

Ahmad, Shahrulazua; Mahidon, Rafedon; Shukur, Mohammad Hassan; Hamdan, Amiruddin; Kasmin, Musa

2014-12-01

To evaluate the outcome of reconstruction for chronic grade-II posterior cruciate ligament (PCL) deficiency in Malaysian military personnel. Medical records of 16 male military personnel aged 25 to 41 years who underwent reconstruction for chronic grade-II PCL deficiency using the quadruple hamstrings tendon by a single surgeon were reviewed. The mean time from injury to surgery was 43.6 (range, 3-104) months. 10 patients had grade-I (n=4), grade-III (n=2), and grade-IV (n=4) lesions of the medial femoral condyles. Seven patients had medial (n=6) and lateral (n=1) meniscus tears. At the 2-year follow-up, patients were asked to complete a questionnaire consisting of the Lysholm score, Tegner activity level, and International Knee Documentation Committee (IKDC) Subjective Knee Evaluation Form. Posterior drawer test, KT-2000 arthrometer test for posterior translation of the tibia, and military health grade (MHG) were assessed by an independent assessor. At the 2-year follow-up, the mean Lysholm score was 83; the score was excellent in 2 patients, good in 9, fair in 4, and poor in one. The mean IKDC subjective score was 74. The median Tegner activity level increased from 5.5 to 6. The posterior drawer test of 11 patients improved to grade I and the remaining 5 remained at grade II. The mean posterior translation of the tibia was 2.4 mm postoperatively; the posterior translation was normal in 8 patients, nearly normal in 7, and abnormal (≥ 6 mm) in one. The MHG improved in 14 patients and remained unchanged in 2. The latter 2 patients had no chondral lesion or meniscus injury. The first one was 40 years old with a postoperative IKDC score of 55 and a Tegner activity level of 2. The second one was 34 years old with a postoperative IKDC score of 65 and posterior translation of the tibia of 6 mm. Surgical reconstruction for chronic grade-II PCL injury achieved satisfactory outcome and may be appropriate for military personnel.

[Effectiveness of arthroscopic treatment of anterior cruciate ligament tibial eminence avulsion fracture with non-absorbable suture fixation combined with mini-plate].

PubMed

Wang, Suiyuan; Xiao, Yang; Tong, Zuoming; Li, Guiqiu; Jiang, Juhua; Yao, Jinghui; Wu, Zhiyong; Li, Tengfei; Wu, Qun

2013-09-01

To evaluate the surgical techniques and effectiveness of arthroscopic treatment of anterior cruciate ligament (ACL) tibial eminence avulsion fracture with non-absorbable suture fixation combined with the miniplate. Between January 2009 and March 2012, 32 patients with ACL tibial eminence avulsion fractures were treated. There were 18 males and 14 females, aged 12-40 years (mean, 17.5 years). The injury causes included traffic accident injury in 15 cases, sport injury in 6 cases, and falling injury in 11 cases. The time from injury to operation ranged 7-18 days with an average of 9.5 days. Before operation, the results of Lachman test were all positive; the Lysholm score was 52.13 +/- 4.22 and the International Knee Documentation Committee (IKDC) score was 44.82 +/- 2.44. According to Meyers-McKeever classification criteria, there were 12 cases of type II and 20 cases of type III. After arthroscopic poking reduction of fracture, tibial eminence avulsion fractures were fixed with the Ethibond non-absorbable sutures bypass figure-of-eight tibial tunnel combined with the metacarpal and phalangeal mini-plate. Primary healing was obtained in all incisions; no joint infection or skin necrosis occurred after operation. All patients were followed up with an average time of 22.4 months (range, 12-50 months). The patients showed negative Lachman test at 12 weeks after operation. Except 3 patients having knee extension limitation at last follow-up, the knee extension range of motion (ROM) was normal in the other patients; the knee flexion ROM was normal in all patients. The Lysholm score and IKDC score were significantly improved to 94.19 +/- 0.93 and 94.35 +/- 1.22 at last follow-up, showing significant differences when compared with preoperative values (t = 55.080, P = 0.000; t = 101.715, P = 0.000). The arthroscopic treatment of ACL tibial eminence avulsion fracture with Ethibond non-absorbable suture fixation combined with mini-plate is an effective procedure with the advantages of minimal trauma, reliable fixation, and satisfactory recovery of the knee joint function.

Influence of knee flexion and atraumatic mobilisation of infrapatellar fat pad on incidence and severity of anterior knee pain after tibial nailing.

PubMed

Jankovic, Andrija; Korac, Zelimir; Bozic, Nenad-Bozo; Stedul, Ivan

2013-09-01

We evaluated the incidence and aetiology of anterior knee pain (AKP) in a series of patients that underwent intramedullary nailing for stabilisation of tibial fractures. During the preparation of the entry site no excision of the infrapatellar fat was allowed and electrical haemostasis was kept at the lowest level. Medullary canal was reamed and the nails inserted in position of knee flexion over 100 degrees. All fractures were fixed using medial paratendinous approach. Functional outcome was measured using Lysholm knee score. The knee range of movement and return to previous level of activity were also documented and analysed. Mean follow up was 38.9 months (range 12-84 months). In total 60 patients with 62 tibial shaft fractures were analysed. The mean age at the time of final follow up was 49.4 years (range 20-87). In 22 (35.5%) a newly developed and persisting pain in the anterior region of the operated knee was reported. According to VAP scale, the pain was mild (VAS 1-3) in 12 cases (19.4%) and moderate (VAS 4-6) in 10 (16.1%). In 16 cases (73%) the pain was noticed 6-12 months after injury and subjectively related to return to full range of working and recreational activities. The mean Lysholm knee score in the group without AKP was 90.8. In the AKP group with mild pain it was 88.4 and in the group with moderate AKP it was 79.9. Complete return to previous professional and recreational activities occurred in 49/60 patients (81.7%). Content with the treatment regarding expectations in recovery dynamics and return to desired level of activity was present in 98.3% of patients; one patient was unsatisfied with the treatment. Our results indicate that respecting the physiological motion of Hoffa pad and menisci during knee flexion, accompanied with atraumatic mobilisation of retrotendinous fat, reduces incidence and severity of anterior knee pain following intramedullary fixation of tibial shaft fractures. Copyright © 2013 Elsevier Ltd. All rights reserved.

AMIC Cartilage Repair in a Professional Soccer Player

PubMed Central

Bark, S.; Riepenhof, H.; Gille, J.

2012-01-01

We report a case of a professional soccer player suffering from a traumatic cartilage lesion grade IV according to the Outerbridge classification at the femoral condyle treated with an enhanced microfracture technique (AMIC). Autologous Matrix-Induced Chondrogenesis (AMIC) is an innovative treatment for localized full-thickness cartilage defects combining the well-known microfracturing with collagen scaffold and fibrin glue. Because of the cartilage lesion (3 cm2), an AMIC procedure was performed followed by a rehabilitation program according to the protocols in the literature, (Steadman et al.; 2003). After 8 months of rehabilitation, the player returned to team training and after 10 months to competition. Altogether he returned to the same skill level for almost one year after the index operation. He is very satisfied with the clinical results after AMIC, which corresponds with the Lysholm score of 90 points at 12 months. PMID:23259120

The helical screw expander evaluation project. [for geothermal wells

NASA Technical Reports Server (NTRS)

Mckay, R. A.

1977-01-01

A positive-displacement helical-screw expander of the Lysholm type has been adapted for geothermal service and successfully demonstrated in a 50 kW prototype power system. Evaluation of the expander by tests of a new model in a 1 MW power system under wellhead conditions in selected liquid-dominated geothermal fields is proposed. The objectives are to determine the performance characteristics of the expander and power system over a broad range of operating conditions and also to examine the concept of wellhead power plants. Throttling and fractionation of the fluids from the test wells is planned to simulate a wide range of wellhead pressures and steam fractions. Variation in the expander exhaust pressure is also planned. The investigation will include expander efficiency, corrosion, erosion, scale formation and control, and endurance testing. Interaction studies with the wells and an electric grid are also proposed.

[Case-control study on Chinese medicine fumigation and massage therapy for the treatment of knee stability and func tional recovery after anterior cruciate ligament reconstruction operation].

PubMed

Min, Zhong-han; Zhou, Ying; Jing, Lin; Zhang, Hong-mei; Wang, Sheng; Chen, Wei-heng; Chen, Ping-quan

2016-05-01

To study clinical outcomes of Chinese medidine fumigation and massage therapy for the treatment of knee stability and functional recovery after anterior cruciate ligament reconstruction operation,and to explore the effect on tendon-bone healing. Total 50 patients were divided into two groups: the control group (normal rehabilitation therapy group),the treatment group (Chinese medicine fumigation and manipulation group). There were 25 patients in the control group, including 16 males and 9 females, who were treated with isometric muscle training, with the gradually enlarging amplitude of flexion and progressive loading of bearing training for knee recovery. There were 25 patients in the treatment group, including 15 males and 10 females,who were treated with the conventional rehabilitation therapy combined with Chinese medicine fumigation and massage therapy. The Chinese herbs named as Haitongpi decoction was steamed by a special equipment to fumigate the knee after operation; Based on the biomechanical parameters of the ligament reconstruction, the massage therapy was designed to control the degree of the knee flexion and release the adhesion for early recovery of knee functions. The Lysholm knee function evaluation system was used, and MRI examination was performed to measure the change in width of ligament tunnel in femur and tibia to evaluate the safety and stability of the treatment. Lysholm system showed that two groups both had improving results from the 1st month after operation to the 3rd month (treatment group, F=36.54, P<0.05; the control group, F=28.12, P<0.05), and the results of the treatment group was better than that of the control group at the observation point (the 1st month, t=0.105, P<0.05; the 3rd month, t=5.361, P<0.01). There was no difference between the two groups when evaluating the bone and tendon healing 3 and 12 months after operation (P>0.05), indicating that Chinese rehabilitation therapy was a safety treatment without the influence on the loosing of tendon. Chinese medicine fumigation and massage therapy can early improve the knee function after the anterior cruciate ligament reconstruction operation without the disturbance of the knee stability.

Revision anterior cruciate ligament reconstruction with nonirradiated fresh-frozen patellar tendon allograft.

PubMed

Fox, Jeff A; Pierce, Mark; Bojchuk, John; Hayden, Jennifer; Bush-Joseph, Charles A; Bach, Bernard R

2004-10-01

To evaluate the effectiveness of a revision anterior cruciate ligament reconstruction with nonirradiated patellar tendon allograft used to salvage a failed index patellar tendon autograft procedure. Retrospective case series with minimum 2-year follow-up. Between 1993 and 1999, 39 patients underwent a revision reconstruction. Clinical, radiographic, arthrometric, and functional evaluations were performed. The Tegner, Lysholm, Noyes, Knee Injury and Osteoarthritis Outcome Score (KOOS), International Knee Documentation Committee (IKDC), and SF-12 rating scales were used. Statistical analysis was conducted with our Biostatistics Department. Thirty-two of 38 patients (84%) were personally evaluated. The mean patient age was 28 years (range, 16 to 57 years); the mean follow-up was 4.8 years (range, 2.1 to 12.1 years). After revision, there were significant improvements in the Lachman and pivot-shift test results: 87% had a grade 0/1+ Lachman and a 0/1+ pivot-shift. However, 25% had a grade 1+ pivot-shift. Postoperatively, KT-1000 testing revealed that 84% had a maximum manual side-to-side difference of < or =3 mm and 6% had >5 mm. Functional testing revealed a mean 4% difference in side-to-side comparisons for a single-leg hop for distance and time, as well as vertical jump. The mean results of Noyes sports function (72), Lysholm (75), Tegner (6.3), KOOS sports activity scale (67), SF-12 physical component (48), SF-12 mental component (55), and IKDC (71) were obtained. The Noyes sports activity score showed a significant improvement from 55 preoperatively to 70 at follow-up. Subjectively, 87% of patients indicated that they were completely or mostly satisfied with the surgical outcome. One patient required another revision. The 2- to 11-year follow-up showed that the results of revision ACL reconstruction with a nonirradiated patellar tendon allograft were less favorable than those of a primary anterior cruciate ligament reconstruction, with a lower subjective satisfaction level and a higher percentage of patients with grade 1+ or higher pivot-shift results. However, when compared with previously published reports, our results were comparable and underscore that revision anterior cruciate ligament surgery should be approached with tempered enthusiasm and careful preoperative counseling, and considered as a salvage procedure. Level IV.

Deepening trochleoplasty combined with balanced medial patellofemoral ligament reconstruction for an adequate graft tensioning

PubMed Central

von Engelhardt, Lars V; Weskamp, Pia; Lahner, Matthias; Spahn, Gunter; Jerosch, Joerg

2017-01-01

AIM To evaluate our modified deepening trochleoplasty combined with a balanced medial patellofemoral ligament (MPFL) reconstruction for soft tissue alignement. METHODS Thirty-three knees with with recurrent patellar dislocations and a trochlear dysplasia in 30 patients (m/f = 12/21, mean age 24 ± 9 years) underwent a combination of a modified deepening trochleoplasty and a balanced MPFL reconstruction for a medial soft tissue alignement. After a mean follow-up period of 29 ± 23 mo, patients’ return to sports, possible complications as well as the clinical outcomes using the Kujala, International Knee Documentation Committee (IKDC) and Lysholm scoring were evaluated. Moreover, patients’ satisfaction with the general outcome, the cosmetic outcome, the pre- and postoperative pain and a potential avoidance behaviour were assessed with additional standardized questionnaires which also included different visual analog scales. RESULTS There were no signs of a persistent instability. The Kujala score improved from a mean of 64 ± 16 points to 94 ± 9 points, the Lysholm score improved from a mean of 63 ± 17 to 95 ± 6 points and the IKDC score from 58 ± 11 to 85 ± 12 points, P < 0.0001, respectively. The assessment of pain using a visual analog scale showed a significant pain reduction from a mean of 4.8 ± 2.0 to 1.3 ± 3.4 points (P < 0.0001). Two of 26 cases (92%) who were engaged in regular physical activity before surgery did not return to full sporting activities. One patient felt that his sport was too risky for his knee and reported an ongoing avoidance behaviour. The other patient preferred to wait for surgery of her contralateral knee. Of the eight patients who were not engaged in sporting activities before surgery, three started regular sporting activities after surgery. In 31 of the 33 cases (94%), the patients were very satisfied with the clinical outcome of the surgery. Regarding the cosmetic results, no patients felt impaired in their self-confidence and in their clothing decisions. CONCLUSION Our technique shows a good clinical outcome in terms of the common scorings as well as in terms of pain, return to sports and patient satisfaction. PMID:29312853

Sports activity after surgical treatment of intra-articular tibial plateau fractures in skiers.

PubMed

Loibl, Markus; Bäumlein, Martin; Massen, Felix; Gueorguiev, Boyko; Glaab, Richard; Perren, Thomas; Rillmann, Paavo; Ryf, Christian; Naal, Florian D

2013-06-01

Tibial plateau fractures occur frequently while participating in winter sports, but there is no information on whether skiers can resume sports and recreational activities after internal fixation of these fractures. Skiers can resume low-impact sports activity after internal fixation of tibial plateau fractures. Case series; Level of evidence, 4. A total of 103 patients were surveyed by postal questionnaires to determine their sports activities at a mean of 7.8 ± 1.8 years after internal fixation of intra-articular tibial plateau fractures. The survey also included the Lysholm score, the Tegner activity scale, and a visual analog scale (VAS) for pain. At the time of the survey, 88% of the patients were engaged in sports activities (rate of return to sports, 88%), and 53% continued to participate in downhill skiing. The median number of different activities declined from 5 (range, 1-17) preoperatively to 4 (range, 0-11) postoperatively (P < .01). Sports frequency and duration per week did not change: 3 (range, 1-7) preoperatively versus 3 (range, 0-7) postoperatively (P = .275) and 4 hours (range, 1-16 hours) preoperatively versus 3.5 hours (range, 0-15 hours) postoperatively (P = .217), respectively. Median values of all outcome scores declined: Lysholm score, 100 (range, 85-100) preoperatively versus 94.5 (range, 37-100) postoperatively (P < .01); VAS, 0 (range, 0-7) preoperatively versus 1 (range, 0-8) postoperatively (P < .01). Median Tegner activity scale scores declined in all age groups except for patients aged 51 to 60 years. The ability to participate in sports at the time of follow-up compared with the ability before the accident was rated as "similar" by 57 patients (62.0%) and as "worse" by 35 patients (38.0%). The more severe fracture types, B3 and C3 according to the AO classification system, were associated with poorer outcomes related to return to sports and functional scores. A large percentage of skiers with surgically treated intra-articular tibial plateau fractures cannot continue to participate in downhill skiing; however, the majority could resume an active lifestyle for several years after the trauma. Fracture type seems to be an important factor influencing physical activity and general functional outcome.

[Application of pie-crusting the medial collateral ligament release in arthroscopic surgery for posterior horn of 
medial meniscus in knee joint].

PubMed

Zhu, Weihong; Tang, Qi; Liao, Lele; Li, Ding; Yang, Yang; Chen, You

2017-09-28

To explore the effectiveness and safety of pie-crusting the medial collateral ligament release (MCL) in treating posterior horn of medial meniscus (PHMM) tear in tight medial tibiofemoral compartment of knee joint.
 Methods: Thirty-two consecutive patients with PHMM tear in tight medial tibiofemoral compartment of knee joint were admitted to our department from January, 2013 to December, 2014. All patients were performed pie-crusting the MCL release at its tibial insertion with 18-gauge intravenous needle. All patients were evaluated by valgus stress test and bilateral valgus stress radiograph at postoperative 1st day, 4th week and 12th week. Visual Analogue Scales (VAS), Lysholm scores, Tegner scores and International Knee Documentation Committee (IKDC) scores were recorded at the 1st, 3th, 6th month follow-up, then follow-up every 6 months.
 Results: The mean follow-up was 28 (24-36) months. All cases were negative in valgus stress test. MCL rupture, femoral fracture, articular cartilage lesion and neurovascular injury were not found at the last follow-up. The median medial joint space width of affected side and unaffected side for valgus stress radiographs were 6.8 mm and 4.3 mm (P<0.05) at the 1st day, 5.5 mm and 4.2 mm 
(P<0.05) in the 4th week and 4.8 mm and 4.3 mm (P>0.05) at the 12th week, respectively. VAS scores was changed from 4.5±1.5 preoperatively to 1.7±1.0 at the final follow-up (t=16.561, P<0.05). Lysholm scores was changed from 52.3±5.8 preoperatively to 93.2±6.3 at the final follow-up (t=-41.353, P<0.05). Tegner scores was changed from 4.1±1.1 preoperatively to 5.5±0.6 at the final follow-up (t=-18.792, P<0.05). IKDC scores was changed from 54.5±6.2 preoperative to 93.8±4.5 at the final follow-up (t=-38.253, P<0.05).
 Conclusion: Pie-crusting the medial collateral ligament release is a safe, minimal invasive and effective surgical option for posterior horn of medial meniscus tear in tight medial tibiofemoral compartment of knee joint.

ACL reconstruction in patients aged 40 years and older: a systematic review and introduction of a new methodology score for ACL studies.

PubMed

Brown, Christopher A; McAdams, Timothy R; Harris, Alex H S; Maffulli, Nicola; Safran, Marc R

2013-09-01

Treatment of the anterior cruciate ligament (ACL)-deficient knee in older patients remains a core debate. To perform a systematic review of studies that assessed outcomes in patients aged 40 years and older treated with ACL reconstruction and to provide a new methodological scoring system that is directed at critical assessment of studies evaluating ACL surgical outcomes: the ACL Methodology Score (AMS). Systematic review. A comprehensive literature search was performed from 1995 to 2012 using MEDLINE, EMBASE, and Scopus. Inclusion criteria for studies were primary ACL injury, patient age of 40 years and older, and mean follow-up of at least 21 months after reconstruction. Nineteen studies met the inclusion criteria from the 371 abstracts from MEDLINE and 880 abstracts from Scopus. Clinical outcomes (International Knee Documentation Committee [IKDC], Lysholm, and Tegner activity scores), joint stability measures (Lachman test, pivot-shift test, and instrumented knee arthrometer assessment), graft type, complications, and reported chondral or meniscal injury were evaluated in this review. A new methodology scoring system was developed to be specific at critically analyzing ACL outcome studies and used to examine each study design. Nineteen studies describing 627 patients (632 knees; mean age, 49.0 years; range, 42.6-60.0 years) were included in the review. The mean time to surgery was 32.0 months (range, 2.9-88.0 months), with a mean follow-up of 40.2 months (range, 21.0-114.0 months). The IKDC, Lysholm, and Tegner scores and knee laxity assessment indicated favorable results in the studies that reported these outcomes. Patients did not demonstrate a significant difference between graft types and functional outcome scores or stability assessment. The mean AMS was 43.9 ± 7.2 (range, 33.5-57.5). The level of evidence rating did not positively correlate with the AMS, which suggests that the new AMS system may be able to detect errors in methodology or reporting that may not be taken into account by the classic level of evidence rating. Patients aged 40 years and older with an ACL injury can have satisfactory outcomes after reconstruction. However, the quality of currently available data is still limited, such that further well-designed studies are needed to determine long-term efficacy and to better inform our patients with regard to expected outcomes.

Comparison of arthroscopic medial meniscal suture repair techniques: inside-out versus all-inside repair.

PubMed

Choi, Nam-Hong; Kim, Tae-Hyung; Victoroff, Brian N

2009-11-01

There are no reports comparing meniscal healing between inside-out and all-inside repairs using sutures. No difference in healing rate exists between meniscal repairs with inside-out and all-inside suture repair in conjunction with anterior cruciate ligament reconstruction with hamstring tendon. Cohort study; Level of evidence, 2. Forty-eight consecutive patients underwent meniscal repairs of longitudinal tears of the posterior horn of the medial meniscus combined with anterior cruciate ligament reconstructions. All-inside repair was attempted when the tears were located in the red-red zone or the ramp area of the meniscus. If a tear that was in the ramp area or red-red zone extended to the midbody of the meniscus, or if there was a tear in red-white zone, the inside-out repair technique was used. Fourteen patients had all-inside meniscal repairs, and 34 patients had inside-out meniscal repairs with absorbable sutures. Identical postoperative rehabilitation protocols were used. Postoperative evaluations included Lysholm knee scoring scale, Tegner activity levels, Lachman and pivot-shift tests, and KT-1000 arthrometer. Assessment of meniscal status was performed using joint line tenderness, McMurray test, and range of motion. Follow-up magnetic resonance imaging scans were obtained on all patients. Mean follow-up was 35.7 months. No patient had joint line tenderness or reported pain or clicking on McMurray test. There was no significant difference in range of motion between groups. Follow-up magnetic resonance imaging scans demonstrated that 10 (71.4%) menisci were healed and 4 (28.6%) partially healed in the all-inside group; 24 (70.6%) menisci were healed and 10 (29.4%) partially healed in the inside-out group. There was no significant difference in meniscal healing between groups. There were no differences in Lachman test, KT-1000 arthrometer side-to-side differences measurements, Lysholm scores, and Tegner activity scales. There was a significant difference in pivot-shift test between groups (P = .023). There were 2 complications associated with surgery. In the inside-out group, 1 patient required manipulation, and 2 patients had limited motion at final follow-up. Two patients in the inside-out group experienced transient saphenous nerve injury. There was no significant difference in meniscal healing between inside-out and all-inside repair techniques in combination with anterior cruciate ligament reconstructions.

[Clinical study of the electroacupuncture combined with thunder-fire moxibustion in treatment of degenerative knee osteoarthritis with cold-damp stagnation].

PubMed

Zhang, Huajun; Xu, Haidong; Liu, Tingting; Li, Peifa

2016-12-12

To observe the clinical effect of early degenerative knee osteoarthritis with cold-damp stagnation treated with electroacupuncture (EA) combined with thunder-fire moxibustion and simple EA. Eighty cases were randomly assigned into a combination group and an EA group,40 cases in each one. Twenty-five min EA was used in the EA group mainly at ashi points,Neixiyan(EX-LE 4),Zusanli(ST 36),Dubi(ST 35),Yanglingquan(GB 34),Yinlingquan(SP 9) and Liangqiu(ST 34) after deqi ( qi arrival),once a day. Based on EA at the same acupoints as the EA group,thunder-fire moxibustion was applied at ashi points,Dubi(ST 35)and Liangqiu(ST 34) by means of 20-minute suspended moxibustion,once a day. Ten-day treatment was seen as one course,and continuous 2 courses were applied. The indices were observed before and after treatment including visual analogue scale(VAS) score,Lequesne index score,Lysholm score of knee joint,serum C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR). Clinical effects were also evaluated and 6-month follow-up was implemented to show the recurrence rate. After treatment the total effective rate of the combination group was 95.0%(38/40),which was better than 82.5%(33/40) of the EA group( P <0.05).The Lequesne index score,VAS score,serum CRP and ESR apparently decreased compared with those before treatment in the two groups(all P <0.05),and the four indices in the combination group were obviously lower than those in the EA group(all P <0.05). As for the Lysholm knee joint score,the good rates of the two groups enhanced after treatment(both P <0.05),and the result of the combination group was superior to that of the EA group[87.5%(35/40) vs 72.5%(29/40), P <0.05]. At 6-month follow-up,the recurrence rate of the combination group was lower than that of the EA group[26.7%(4/15) vs 100.0%(9/9), P <0.05]. EA combined with thunder-fire moxibustion achieve good effect for degenerative knee osteoarthritis with cold-damp stagnation. The combination therapy have advantages in effect duration compared with simple EA.

Two independent proteomic approaches provide a comprehensive analysis of the synovial fluid proteome response to Autologous Chondrocyte Implantation.

PubMed

Hulme, Charlotte H; Wilson, Emma L; Fuller, Heidi R; Roberts, Sally; Richardson, James B; Gallacher, Pete; Peffers, Mandy J; Shirran, Sally L; Botting, Catherine H; Wright, Karina T

2018-05-02

Autologous chondrocyte implantation (ACI) has a failure rate of approximately 20%, but it is yet to be fully understood why. Biomarkers are needed that can pre-operatively predict in which patients it is likely to fail, so that alternative or individualised therapies can be offered. We previously used label-free quantitation (LF) with a dynamic range compression proteomic approach to assess the synovial fluid (SF) of ACI responders and non-responders. However, we were able to identify only a few differentially abundant proteins at baseline. In the present study, we built upon these previous findings by assessing higher-abundance proteins within this SF, providing a more global proteomic analysis on the basis of which more of the biology underlying ACI success or failure can be understood. Isobaric tagging for relative and absolute quantitation (iTRAQ) proteomic analysis was used to assess SF from ACI responders (mean Lysholm improvement of 33; n = 14) and non-responders (mean Lysholm decrease of 14; n = 13) at the two stages of surgery (cartilage harvest and chondrocyte implantation). Differentially abundant proteins in iTRAQ and combined iTRAQ and LF datasets were investigated using pathway and network analyses. iTRAQ proteomic analysis confirmed our previous finding that there is a marked proteomic shift in response to cartilage harvest (70 and 54 proteins demonstrating ≥ 2.0-fold change and p < 0.05 between stages I and II in responders and non-responders, respectively). Further, it highlighted 28 proteins that were differentially abundant between responders and non-responders to ACI, which were not found in the LF study, 16 of which were altered at baseline. The differential expression of two proteins (complement C1s subcomponent and matrix metalloproteinase 3) was confirmed biochemically. Combination of the iTRAQ and LF proteomic datasets generated in-depth SF proteome information that was used to generate interactome networks representing ACI success or failure. Functional pathways that are dysregulated in ACI non-responders were identified, including acute-phase response signalling. Several candidate biomarkers for baseline prediction of ACI outcome were identified. A holistic overview of the SF proteome in responders and non-responders to ACI  has been profiled, providing a better understanding of the biological pathways underlying clinical outcome, particularly the differential response to cartilage harvest in non-responders.

Medial patellofemoral ligament reconstruction with a divergent patellar transverse 2-tunnel technique.

PubMed

Panni, Alfredo Schiavone; Alam, Mahbub; Cerciello, Simone; Vasso, Michele; Maffulli, Nicola

2011-12-01

The medial patellofemoral ligament (MPFL) is the primary passive restraint to lateral patellar dislocation and there is increasing awareness of its role in recurrent lateral patellar instability. This study was conducted to prospectively analyze the functional results of a modified MPFL reconstruction technique in recurrent patellar dislocation. Case series; Level of evidence, 4. Forty-eight patients (51 knees) with at least 3 episodes of lateral patellar dislocation who had been treated with a 6-month rehabilitation protocol were included in this study. All patients practiced sports regularly. Reconstruction was with a semitendinosus tendon using a divergent 2-tunnel technique. Outcome was evaluated with the Kujala, Larsen, modified Lysholm, and Fulkerson outcome scores. Patient satisfaction with range of motion, pain, and sporting activities was also assessed. Three patients were lost at the final follow-up, giving a follow-up rate of 94%. The mean follow-up was 33 months. There was no patella dislocation postoperatively. The mean Kujala score improved significantly (P < .01) from 56.7 ± 17.7 (2 × standard deviation) preoperatively to 86.8 ± 14.4 postoperatively. The mean Larsen score improved significantly (P < .01) from 12.4 ± 3.2 to 17.1 ± 2.7. The mean Fulkerson score improved significantly (P < .01) from 59.2 ± 21.8 to 90.1 ± 14. The mean modified Lysholm score improved significantly (P < .01) from 57.6 ± 19.6 to 88.1 ± 16.2. Sixty-four percent of patients returned to the same type of sport at the same level, 16% reduced the level or type of sport for reasons unrelated to the surgery, while 20% reduced the level of sport or changed it for reasons related to surgery. Eighty-seven percent were either satisfied or very satisfied with the pain relief achieved. The patellar tilt decreased significantly from a preoperative mean of 11.1° to 8.9° at the last follow-up (P = .02). The mean preoperative Insall-Salvati ratio of 1.1 decreased to 1.06, although the change was not significant (P = .1). The results of modified MPFL reconstructions are encouraging, with minimal risks of redislocation and an overall patient satisfaction rate of over 80%. These early and medium-term results are comparable with those of other MPFL reconstruction techniques reported in the literature.

Comparative outcomes of open-wedge high tibial osteotomy with platelet-rich plasma alone or in combination with mesenchymal stem cell treatment: a prospective study.

PubMed

Koh, Yong-Gon; Kwon, Oh-Ryong; Kim, Yong-Sang; Choi, Yun-Jin

2014-11-01

This study compared the clinical results and second-look arthroscopic findings of patients undergoing open-wedge high tibial osteotomy (HTO) for varus deformity, with or without mesenchymal stem cell (MSC) therapy. This prospective, comparative observational study was designed to evaluate the effectiveness of MSC therapy. The patients were divided into 2 groups: HTO with platelet-rich plasma (PRP) injection only (n = 23) or HTO in conjunction with MSC therapy and PRP injection (n = 21). Prospective evaluations of both groups were performed using the Lysholm score, Knee Injury and Osteoarthritis Outcome Score (KOOS), and a visual analog scale (VAS) score for pain. Second-look arthroscopy was carried out in all patients at the time of metal removal. The patients in the MSC-PRP group showed significantly greater improvements in the KOOS subscales for pain (PRP only, 74.0 ± 5.7; MSC-PRP, 81.2 ± 6.9; P < .001) and symptoms (PRP only, 75.4 ± 8.5; MSC-PRP, 82.8 ± 7.2; P = .006) relative to the PRP-only group. Although the mean Lysholm score was similarly improved in both groups (PRP only, 80.6 ± 13.5; MSC-PRP, 84.7 ± 16.2; P = .357), the MSC-PRP group showed a significantly greater improvement in the VAS pain score (PRP only, 16.2 ± 4.6; MSC-PRP, 10.2 ± 5.7; P < .001). There were no differences in the preoperative (PRP only, varus 2.8° ± 1.7°; MSC-PRP, varus 3.4° ± 3.0°; P = .719) and postoperative (PRP only, valgus 9.8° ± 2.4°; MSC-PRP, valgus 8.7° ± 2.3°; P = .678) femorotibial angles or weight-bearing lines between the groups. Arthroscopic evaluation, at plate removal, showed that partial or even fibrocartilage coverage was achieved in 50% of the MSC-PRP group patients but in only 10% of the patients in the PRP-only group (P < .001). MSC therapy, in conjunction with HTO, mildly improved cartilage healing and showed good clinical results in some KOOS subscores and the VAS pain score compared with PRP only. Level II, prospective comparative study. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Hamstring tendon versus patellar tendon anterior cruciate ligament reconstruction using biodegradable interference fit fixation: a prospective matched-group analysis.

PubMed

Wagner, Michael; Kääb, Max J; Schallock, Jessica; Haas, Norbert P; Weiler, Andreas

2005-09-01

There are still controversies about graft selection for primary anterior cruciate ligament reconstruction, especially with respect to knee stability and functional outcome. Biodegradable interference screw fixation of hamstring tendon grafts provides clinical results similar to those achieved with identical fixation of bone-patellar tendon-bone grafts. Cohort study; Level of evidence, 2. In 1996 and 1997, primary isolated anterior cruciate ligament reconstruction using a bone-patellar tendon-bone autograft was performed in 72 patients. Since 1998, hamstring tendons were used as routine grafts. Matched patients with a hamstring tendon graft were selected from a database (n = 284). All patients were followed prospectively for a minimum of 2 years with KT-1000 arthrometer testing, International Knee Documentation Committee score, and Lysholm score. In the bone-patellar tendon-bone group, 9 patients were excluded because of bilateral rupture of the anterior cruciate ligament, 3 patients (4.2%) had a graft rupture, and 4 patients were lost to follow-up (follow-up rate, 92.1%), leaving 56 patients for a matched-group analysis. In the hamstring tendon database, the graft rupture rate was 5.6% (P = .698). The Lysholm score was 89.7 in the patellar tendon group and 94 in the hamstring tendon group (P = .003). The KT-1000 arthrometer side-to-side difference was 2.6 mm for the patellar tendon group and 2.1 mm for the hamstring tendon group (P = .041). There were significantly less positive pivot-shift test results in the hamstring tendon group (P = .005), and hamstring tendon patients showed lower thigh atrophy (P = .024) and patellofemoral crepitus (P = .003). Overall International Knee Documentation Committee scores were better (P = .001) in the hamstring tendon group (hamstring tendon: 34 x A, 21 x B, 0 x C, 0 x D; bone-patellar tendon-bone: 17 x A, 32 x B, 6 x C, 0 x D). In this comparison of anterior cruciate ligament reconstruction with bone-patellar tendon-bone and anatomical hamstring tendon grafts, the hamstring tendon graft was superior in knee stability and function. These findings are partially contrary to previous studies and might be attributable to the use of an anatomical joint line fixation for hamstring tendon grafts. Thus, hamstring tendons are the authors' primary graft choice for anterior cruciate ligament reconstruction, even in high-level athletes.

Moore I postero-medial articular tibial fracture in alpine skiers: Surgical management and return to sports activity.

PubMed

Morin, Vincent; Pailhé, Régis; Sharma, Akash; Rouchy, René-Christopher; Cognault, Jérémy; Rubens-Duval, Brice; Saragaglia, Dominique

2016-06-01

Over the past 10 years, like many authors, we observed an increasing number of Moore I tibial plateau fractures related to alpine skiing for which the surgeon may face difficult choices regarding surgical approach and fixation means. Some authors have recently been suggesting a posterior approach associated to open reduction and osteosynthesis by a buttress plate. But in our knowledge there is no specific study on sports activity recovery after Moore I tibial fractures. The aim of this work was to assess sports activities and clinical outcomes after surgically treated Moore I tibial plateau fractures in an athletic population of skiers. We conducted a prospective case series between 2012 and 2014. This included fifteen patients aged 39.6±7 years whom presented with a Moore I tibial plateau fracture during a skiing accident. 12 cases (80%) presented with an associated tibial spine fracture. Treatment consisted of a standard antero-medial approach, with a medial para patellar arthrotomy to allow direct visualisation of articular reduction and spinal fixation. Two or three 6.5mm long cancellous bone screws were placed antero-posteriorly so as to ensure perfect compression of the fracture site. Radiological and functional results were assessed by an independent observer (Lysholm-Tegner, UCLA, KOOS scores) at the longest follow-up. Mean follow-up was 18.2±6 months (12-28). An immediate postoperative anatomical reduction was achieved in all cases and remained stable in time. At last follow-up Lysholm mean score was 85±14 points (59-100), UCLA score was 7.3±1.6 (4-10) and Tegner score was 4.6±1.3 (3-6). Mean KOOS score was 77±15 (54-97). 87% of patients had resumed their skiing activity and 93% were satisfied or very satisfied from their post-operative surgical outcome. We observed no pseudarthrosis or secondary varus displacement. In our series 87% of patients had resumed back to their sporting activities. Surgical management of Moore I tibial plateau fractures by isolated antero-posterior screwing provides excellent clinical and radiological results. The anteromedial incision has a dual advantage of anatomical reduction, tibial spine fixation (in 80% of our cases) and posteromedial fragment reduction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Anterior Cruciate Ligament Reconstruction with Tibial Attachment Preserving Hamstring Graft without Implant on Tibial Side

PubMed Central

Sinha, Skand; Naik, Ananta Kumar; Maheshwari, Mridul; Sandanshiv, Sumedh; Meena, Durgashankar; Arya, Rajendra K

2018-01-01

Background: Tibial attachment preserving hamstring graft could prevent potential problems of free graft in anterior cruciate ligament (ACL) reconstruction such as pull out before graft-tunnel healing or rupture before ligamentization. Different implants have been reportedly used for tibial side fixation with this technique. We investigated short-term outcome of ACL reconstruction (ACLR) with tibial attachment sparing hamstring graft without implant on the tibial side by outside in technique. Materials and Methods: Seventy nine consecutive cases of ACL tear having age of 25.7 ± 6.8 years were included after Institutional Board Approval. All subjects were male. The mean time interval from injury to surgery was of 7.5 ± 6.4 months. Hamstring tendons were harvested with open tendon stripper leaving the tibial insertion intact. The free ends of the tendons were whip stitched, quadrupled, and whip stitched again over the insertion site of hamstring with fiber wire (Arthrex). Single bundle ACLR was done by outside in technique and the femoral tunnel was created with cannulated reamer. The graft was pulled up to the external aperture of femoral tunnel and fixed with interference screw (Arthrex). The scoring was done by Lysholm, Tegner, and KT 1000 by independent observers. All cases were followed up for 2 years. Results: The mean length of quadrupled graft attached to tibia was 127.65 ± 7.5 mm, and the mean width was 7.52 ± 0.78 mm. The mean preoperative Lysholm score of 47.15 ± 9.6, improved to 96.8 ± 2.4 at 1 year. All cases except two returned to the previous level of activity after ACLR. There was no significant difference statistically between preinjury (5.89 ± 0.68) and postoperative (5.87 ± 0.67) Tegner score. The anterior tibial translation (ATT) (KT 1000) improved from 11.44 ± 1.93 mm to 3.59 ± 0.89 mm. The ATT of operated knee returned to nearly the similar value as of the opposite knee (3.47 ± 1.16 mm). The Pivot shift test was negative in all cases. None had a failure of graft till final followup. Conclusion: Attachment sparing hamstring graft without a tibial implant is a simple, cost-effective technique that provides a consistently satisfactory outcome. PMID:29576645

The Effect of Cartilage Fragments on Femoral Tunnel Widening After Anterior Cruciate Ligament Reconstruction: A Prospective Randomized Controlled Study.

PubMed

Zhang, Chi; Pan, Jun; Chen, Jian-De; Zhang, Yi-Jun; Gu, Peng-Cheng; Lin, Xiang-Jin; Cai, You-Zhi

2018-05-03

To analyze the effect of cartilage fragments on tunnel widening and tendon-bone integration at 2 years' follow-up after anterior cruciate ligament reconstruction (ACLR). A prospective randomized controlled study was performed in 116 patients who underwent ACLR with autologous hamstring tendons augmented with cartilage fragments (study group, n = 56) or without any augmentation (control group, n = 60). All patients were followed up for 25.6 months (range, 24-28 months), and the International Knee Documentation Committee score, Lysholm score, and visual analog scale score were determined. Computed tomography scans of all patients were obtained 2 years after surgery to evaluate the diameter of the femoral tunnel and thereby assess the amount of tunnel widening. Magnetic resonance imaging evaluation was performed 2 years postoperatively to evaluate the status of the graft in the femoral tunnel. In addition, 5 patients underwent biopsy of the tendon-bone interface at 24 months postoperatively with histologic assessment and transmission electron microscopy. A total of 107 patients completed the follow-up. There were no significant differences between the 2 groups in terms of International Knee Documentation Committee score (P = .07), Lysholm score (P = .10), and visual analog scale score (P = .57) at 24 months' follow-up. The femoral tunnel diameter and the tunnel widening percentage in the study group were significantly smaller than those in the control group (P < .001). The signal-noise quotient value of the graft in the femoral tunnel was 10.4 ± 7.0 in the study group, which was significantly lower than that in the control group (19.5 ± 9.2, P < .001). Histologic studies of the tendon-bone interface showed that there were more bone formations containing chondroid cells with aligned connective tissue in the study group compared with the control group; in addition, the diameter of the collagen fibrils in the study group was considerably thicker than that in the control group (P < .05). The use of cartilage fragments was effective in preventing femoral tunnel widening and seemed to promote the tendon-bone integration process after ACLR. Level II, prospective randomized controlled study. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

[MINIMALLY INVASIVE TREATMENT OF POSTERIOR CRUCIATE LIGAMENT AVULSION FRACTURE IN A FLOPPY LATERAL POSITION].

PubMed

Zhao, Junchao; Wang, Hao

2016-09-08

To conclude the effectiveness of arthroscopy combined with Burks and SchaVer's approach in the treatment of posterior cruciate ligament (PCL) avulsion fractures in a floppy lateral position. Between May 2010 and March 2014, 21 patients with PCL avulsion fractures were treated. There were 13 males and 8 females, aged 21 to 62 years (mean, 39.1 years). The causes included traffic accident injury in 10 cases, sports injury in 5 cases, and falling injury from height in 6 cases. The time from injury to hospital was 1-6 days (mean, 2.5 days). The results of posterior drawer test were all positive, and the results of anterior drawer test and lateral stress test were all negative. The Lysholm score was 28.0±5.5 before operation. And the American Orthopaedic Foot and Ankle Society (IKDC) score was 46.2±7.6 before operation. According to Meyer standards for fractures classification, 11 cases were rated as type II and 10 cases as type III. Arthroscopy was used to inspect and treat the intra-articular lesions, then avulsion fracture was fixed by Burks and SchaVer's approach in lateral position. Postoperative functional exercises were performed. Primary healing of incision was obtained, without nerve and vascular injury or joint infection. All patients were followed up 18-36 months (mean, 27.2 months). The X-ray films of the knee joint showed good fractures reduction and healing at 3 months after operation. The results of posterior drawer test and reverse Lachman test were negative. The knee range of motion was recovered to normal level. At last follow-up, the Lysholm score of the knee joint was significantly improved to 90.9±1.4 from preoperative one ( t =54.584, P =0.000), and the IKDC score was significantly increased to 90.5±5.3 from preoperative one ( t =15.638, P =0.000), including 19 cases of grade A and 2 cases of grade B. A combination of arthroscopy and Burks and SchaVer's approach for the treatment of PCL avulsion fractures in a floppy lateral position has the advantages of minimal invasion and safe approach, short operative time, and early postoperative rehabilitation exercises, so it can provide satisfactory function recovery of the knee joint.

[CLINICAL OBSERVATION OF ONE-STAGE ARTHROSCOPIC RECONSTRUCTION AND STRICT IMMOBILIZATION FOR TREATMENT OF KNEE DISLOCATION].

PubMed

Mamatkerimulla; Xu Gang; Wang, Xin; Zhang, Yang; Jia, Yong; Huang, Tao; Xing, Shuxing

2016-04-01

To investigate the effectiveness of one-stage arthroscopic reconstruction and strict immobilization for 6 weeks for treatment of knee dislocation. Between August 2010 and May 2013, 22 cases (22 knees) of knee dislocation were treated with one-stage reconstruction and strict immobilization for 6 weeks. There were 15 males and 7 females, aged 21-54 years (mean, 31.5 years). The left knee and right knee were involved in 8 cases and 14 cases respectively. The disease causes were traffic accident in 12 cases, falling from height in 6 cases, and sports injury in 4 cases. The time between injury and operation was less than 2 weeks in 6 cases, 2-3 weeks in 10 cases, and more than 3 weeks in 6 cases. The results of anterior drawer test, posterior drawer test, and Lachman test were positive in all patients. The posterior displacement of the tibia was more than 10 mm. The results of valgus stress test and varus stress test were positive in 13 cases and 11 cases respectively. The preoperative knee range of motion was (58.2 ± 28.4)°, Lysholm score was 39.7 ± 4.6. All patients had anterior cruciate ligament rupture and posterior cruciate ligament rupture; combined injuries included medial collateral ligament rupture in 11 cases, lateral collateral ligament rupture in 9 cases, both medial and lateral collateral ligament rupture in 2 cases, femoral condylar avulsion fracture in 2 cases, and meniscus injury in 7 cases. No nerve or blood vessel injury was observed. All cases obtained primary healing of incision without infection. All the patients were followed up 12-48 months (mean, 27.8 months). At 12 months after operation, the results of the anterior drawer test, posterior drawer test, Lachman test, valgus stress test, and varus stress test were all negative; the knee range of motion increased was significantly to (121.3 ± 7.9)° (t = 30.061, P = 0.000); Lysholm score was 87.2 ± 6.1, showing significant difference when compared with preoperative score (t = 24.642, P = 0.000). A combination oathogopi osta ge reconstruction and strict immobilization for treatment of knee dislocation is a safe and effective method, good stability and joint function can be achieved.

Arthroscopic treatment of chronic patellar tendinopathy in high-level athletes

PubMed Central

Alaseirlis, Dimosthenis Artemis; Konstantinidis, George Athanasios; Malliaropoulos, Nikolaos; Nakou, Lamprini Stefanos; Korompilias, Anastasios; Maffulli, Nicola

2012-01-01

Summary To present the results of arthroscopic treatment of patellar tendinopathy in high-level competition athletes. Eleven high-level athletes presented chronic patellar tendinopathy which did not respond to long term conservative treatment. Average age of the patients was 24.8 ±3.4 years old. All patients received an arthroscopic procedure with osteoplasty of the distal patellar pole, debridement of the underlying Hoffa fat pad and of the degenerated areas of the proximal posterior patella tendon and cauterization of the visible neo-vessels. Mean duration of follow-up was 17.4±4 months. Patients showed a major improvement in the Lysholm score from 49.9±5.2 to 92.5±7 and in the VISA P score from 41.2±5.2 to 86.8±14.9 on tenth post-operative week. All patients had returned to sports activities by the twelfth postoperative week. Arthroscopic treatment of chronic patellar tendinopathy found to be a minimal invasive and safe technique which produced satisfactory results. PMID:23738308

Clinical significance of condylar chondromalacia after arthroscopic resection of flap-tears of the medial meniscus. A prospective study of 93 cases.

PubMed

Aune, A K; Madsen, J E; Moen, H

1995-01-01

We describe the results after arthroscopic resection of flap-tears of the medial meniscus posterior horn in 93 patients with (40) or without (53) chondromalacia of the adjacent condylar cartilage at the time of operation. These were 93 consecutive patients presenting with medial flap-tears during the period 1988-1990 in our departments. The follow-up averaged 42 (range 26-50) months. There was a significant difference in the functional results at review depending on the presence or absence of condylar chondromalacia at arthroscopy. Among the 40 patients with chondromalacia, the Lysholm score was significantly lower (P < 0.004), and only about half the patients reported a satisfactory result. There was a significant increase in the presence of chondromalacia with age (P < 0.001). In conclusion, the presence of minor degenerative changes in the articular cartilage adjacent to meniscal flap-tears correlated with a less favourable outcome.

Arthroscopic cartilage debridement by excimer laser in chondromalacia of the knee joint. A prospective randomized clinical study.

PubMed

Raunest, J; Löhnert, J

1990-01-01

A new operative technique in arthroscopic treatment of chondromalacia using ultraviolet laser systems is introduced. The postoperative results are evaluated in a prospective and randomized clinical trial. One hundred and forty patients stage II or III chondromalacia according to Outerbridge were randomly assigned to arthroscopic operation using either laser or mechanical instruments. After a 6-month follow-up period the clinical results were compared, guided by a specially designed modification of the Lysholm scoring scale. In the short-term follow-up laser surgery gave superior results in regard to reducing pain (P less than 0.05) and leading to a lower incidence of reactive synovitis (P less than 0.01). No difference was found in respect of disability and functional impairment. Our results lead to the conclusion that arthroscopic laser application seems to be a successful procedure in the treatment of degenerative cartilage disorders, providing precise ablation of tissue without significant thermal damage to the remaining cartilage.

Long-term degradation of a poly-lactide co-glycolide/β-tricalcium phosphate biocomposite interference screw.

PubMed

Barber, F Alan; Dockery, W D; Hrnack, Scott A

2011-05-01

To evaluate the long-term in vivo degradation of biodegradable interference screws made of poly-L-lactide co-glycolide (poly-L-lactic acid [PLLA]/polyglycolic acid [PGA]) and β-tricalcium phosphate (β-TCP). To study in vivo the biological behavior of a PLLA/PGA/β-TCP biocomposite screw (Milagro; DePuy Mitek, Raynham, MA), an institutional review board-approved program using anterior cruciate ligament (ACL) interference fixation screws was initiated in 2005. Thirteen patients who had bone-patellar tendon-bone ACL reconstruction fixed at both the femur and tibia with PLLA/PGA/β-TCP screws at least 24 months earlier were evaluated by physical, radiographic, and computed tomography (CT) evaluations. Lysholm, Tegner, Cincinnati, and International Knee Documentation Committee scores were also obtained. Radiographs and CT scans of the operated knee were obtained. CT scan data measured in Hounsfield units (HU) evaluated the material density at the screw and bone plug sites. Soft-tissue and cancellous and cortical bone site readings were also taken. Osteoconductivity scores were determined at the screw sites by use of an ossification quality score (range, 1 to 4). Eleven men and two women were evaluated at a mean of 38 months after surgery (range, 24 to 49 months). CT scans and radiographs showed the bone plug fused to the tunnel wall with no PLLA/PGA/β-TCP screw remaining. The screws were replaced with material that was calcified and non-trabecular. Osteoconductivity was present in 21 of 26 tunnels (81%) and complete (type 4 ossification) in 5 of 26 (19%). Mean screw site densities (femoral, 159 HU; tibial, 157 HU) were not different from the mean cancellous bone density (femoral, 146 HU; tibial, 140 HU). No positive pivot-shift tests were found. Lysholm, Tegner, and Cincinnati scores improved from 44, 3.7, and 37 preoperatively to 93, 6, and 87 at follow-up, respectively. The mean KT arthrometer (MEDmetric, San Diego, CA) difference was 0.8 mm. The PLLA/PGA/β-TCP interference screw completely degraded, and no remnant was present 3 years after implantation for a bone-patellar tendon-bone graft ACL reconstruction. Osteoconductivity was confirmed in 21 of 26 screw sites (81%) and completely filled the site in 5 of 26 (19%). The PLLA/PGA/β-TCP biocomposite interference screw is osteoconductive. Level IV, therapeutic case series. Copyright © 2011 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Outcome of opening wedge high tibial osteotomy augmented with a Biosorb® wedge and fixed with a plate and screws in 124 patients with a mean of ten years follow-up.

PubMed

Saragaglia, Dominique; Blaysat, Marc; Inman, Dominic; Mercier, Numa

2011-08-01

The objective of this work was firstly to evaluate the long-term results of medial opening wedge high tibial osteotomy (HTO) and secondly to evaluate the tolerance and integration of a Biosorb® wedge (β Tricalcium Phosphate, SBM Company, Lourdes, France). The series consisted of 124 knees in 110 patients, 74 men and 36 women, with mean age of 53.23±10.68 years (range 32-74) and treated between June 1995 and November 2000 for medial compartment knee osteoarthritis by the senior author. The mean preoperative Lysholm and Tegner functional score was 65.44±13.32 (range 27-80) and the preoperative HKA angle was 172.51°±3.8° (range 162-179°). According to the modified Ahlbäck classification there were 27 stage I, 42 stage II, 44 stage III and 11 stage IV knees. All patients were reviewed clinically and radiologically with a mean follow-up of 10.39±1.98 years (range 8-14 years). Immediate postoperative complications consisted of nine undisplaced lateral tibial plateau fractures of no clinical significance, two deep vein thromboses and three pulmonary emboli which resolved with appropriate treatment. At a later stage, there were seven delayed unions without development of pseudarthrosis, and three screw breakages when the AO T-plate was used, leading to a secondary angulation in one case, requiring revision by femoral osteotomy. Postoperative mean weightbearing HKA angle was 182°±1.8° (range 178-186°) and 73.4% of axes were 184°±2°. Fifteen knees (12.1%) underwent total knee arthroplasty (TKA) after a mean delay of 8.87±3.04 years and were excluded from the final analysis. Concerning the long-term results (n = 107 knees), the mean Lysholm-Tegner score was 88±12.7 points (51-100) and the KOOS score was 86±14.6 points (25-100) with 94 patients satisfied or very satisfied (87.85%). In terms of the HTO survivorship curve, with failure consisting of revision to TKA or another operation, survival was 88.8% at five years and 74% at ten years. Concerning Biosorb®, this was completely integrated in 100% of cases and there was complete resorption in 12.1% of cases and greater than 50% resorption in 52.3% of cases.

Relationship between quadriceps strength and patellofemoral joint chondral lesions after anterior cruciate ligament reconstruction.

PubMed

Wang, Hai-Jun; Ao, Ying-Fang; Jiang, Dong; Gong, Xi; Wang, Yong-Jian; Wang, Jian; Yu, Jia-Kuo

2015-09-01

The incidence of the patellofemoral joint chondral lesions after anterior cruciate ligament reconstruction (ACLR) is disturbingly high. Few studies have assessed the factors affecting patellofemoral joint chondral lesions postoperatively. The recovery of quadriceps strength after ACLR could be associated with patellofemoral joint cartilage damage. Cohort study; Level of evidence, 3. A total of 88 patients who underwent arthroscopic anatomic double-bundle ACLR with hamstring autografts received second-look arthroscopy at the time of metal staple removal at an average of 24.1 months (range, 12-51 months) postoperatively. All patients underwent standardized isokinetic strength testing for bilateral quadriceps and hamstrings 1 to 2 days before second-look arthroscopy. The patients were divided into 2 groups: Patients in group 1 had a ≥20% deficit on the peak torque measures for quadriceps compared with that of the contralateral knee, whereas those in group 2 had a <20% deficit on peak torque. Cartilage status at the patellofemoral joint and tibiofemoral joint were evaluated by second-look arthroscopy and the Outerbridge classification. Other assessments included the International Knee Documentation Committee (IKDC) score, Tegner and Lysholm scores, side-to-side difference on KT-2000 arthrometer, and range of motion. There were 42 patients included in group 1 and 46 patients in group 2. The mean postoperative quadriceps peak torque of the involved knee compared with the contralateral knee was 70% (range, 57%-80%) in group 1 and 95% (range, 81%-116%) in group 2. For all patients, a significant worsening was seen in the patellar and trochlear cartilage (P = .030 and <.001, respectively) but not at the medial or lateral tibiofemoral joint after ACLR. A significant worsening in the status of both patellar and trochlear cartilage was seen after ACLR in group 1 (P = .013 and =.011, respectively) and of trochlear cartilage in group 2 (P = .006). Significantly fewer severe chondral lesions of the patella were found in group 2 than in group 1 (proportion of patients whose cartilage grade worsened: 26% vs 48%, P < .05; difference in cartilage grade: 0.09 vs 0.62, P < .05). There was no significant difference for trochlear chondral worsening between the 2 groups. No significant differences were detected between the 2 groups in terms of hamstring strength; Lysholm, Tegner, and IKDC scores; KT-2000 arthrometer anterior laxity; or range of motion. Greater than 80% recovery of quadriceps strength after ACLR is associated with less severe patellar cartilage damage at short-term follow-up. © 2015 The Author(s).

Increased extrusion and ICRS grades at 2-year follow-up following transtibial medial meniscal root repair evaluated by MRI.

PubMed

Kaplan, Daniel J; Alaia, Erin F; Dold, Andrew P; Meislin, Robert J; Strauss, Eric J; Jazrawi, Laith M; Alaia, Michael J

2017-11-02

The purpose of the current study was to evaluate the short-term results of meniscal root repair surgery, assessing clinical and radiographic outcomes, utilizing MRI to assess root healing and extent of post-operative extrusion. This was a single-center, retrospective study evaluating patients who had undergone a medial meniscus posterior root repair using a transtibial pullout technique with two locking cinch sutures. Demographic data were collected from patient charts. Clinical outcomes were assessed with pre- and post-operative IKDC and Lysholm scores. Pre-op scores were taken at the patients' initial clinical visit, mean 1.55 months prior to surgery (± 1.8 months, min 0.3, max 7.3). Radiographic outcomes were assessed with MRI evaluation of root healing, meniscal extrusion, and cartilage degeneration using ICRS criteria. Tunnel placement was evaluated and compared to the anatomic footprint. Eighteen patients (47.2 years ± 11.9) were evaluated at mean follow-up of 24.9 months (± 7.2, min 18.4, max 35.6). The IKDC score significantly increased from 45.9 (± 12.6) pre-operatively to 76.8 (± 14.7) post-operatively (p < 0.001). Lysholm scores also increased from 50.9 (± 7.11) to 87.1 (± 9.8) (p < 0.001). Mean tunnel placement was 5.3 mm (± 3.5, range 0-11.8) away from the anatomic footprint. Mean extrusion increased from 4.74 mm (± 1.7) pre-operatively to 5.98 (± 2.8) post-operatively (p < 0.02). No patients with > 3 mm of extrusion on pre-operative MRI had < 3 mm of extrusion on post-operative MRI. Both medial femoral condyle and medial tibial plateau ICRS grades worsened significantly (p < 0.02 and p < 0.01, respectively). On MRI, one root appeared completely healed, 16 partially healed, and one not healed. Patients treated with the transtibial suture pull-out technique with two locking cinch sutures had improved clinical outcomes, but only partial healing in the majority of cases, increased extrusion, and progression of medial compartment cartilage defect grade on follow-up MRI. Patients should be counseled that although clinical outcomes in the short term may be optimistic, long-term outcomes regarding progression to degenerative arthritis may not be as predictable. III.

Surgical treatment of subacute and chronic valgus instability in multiligament-injured knees with superficial medial collateral ligament reconstruction using Achilles allografts: a quantitative analysis with a minimum 2-year follow-up.

PubMed

Liu, Xin; Feng, Hua; Zhang, Hui; Hong, Lei; Wang, Xue Song; Zhang, Jin; Shen, Jie Wei

2013-05-01

Symptomatic medial collateral ligament (MCL) instability is rare, and it is frequently associated with multiligament injuries. Most clinical investigations have failed to clearly define the specific objective outcome measures assessing the stability of the MCL quantitatively before and after the reconstruction procedure. To quantitatively evaluate the early clinical outcomes of patients with valgus instability of knee joints who had undergone superficial MCL reconstruction using Achilles tendon allografts. Case series; Level of evidence, 4. From August 2005 to December 2010, 19 consecutive patients with MCL injuries were included in this study. The inclusion criteria were (1) a subacute or chronic MCL injury, with a time from initial injury to surgery of longer than 3 weeks, and (2) valgus laxity graded C or D according to the International Knee Documentation Committee (IKDC). All patients underwent superficial MCL reconstruction using Achilles tendon allografts. To evaluate the laxity of the MCL preoperatively and postoperatively, valgus stress radiographs using a Telos device were used. Other assessments included the IKDC subjective functional evaluation and Lysholm score estimation. Sixteen of the 19 patients (12 men and 4 women) were available for final follow-up. The median age of the patients was 37 years (range, 19-53 years); mean body mass index (BMI) was 26.4 (range, 21.7-29.4). The mean time from injury to surgery was 15.9 months (range, 24 days to 84 months), and median follow-up period was 34 months (range, 24-67 months). The mean medial knee laxity (side-to-side difference) was 8.9 ± 3.2 mm (range, 6-15.9 mm) preoperatively and 1.1 ± 0.9 mm (range, -1.1 to 3.2 mm) postoperatively (P < .001). The preoperative mean IKDC subjective knee functional score was 49.8 ± 6.9 (range, 31-57.5), while the postoperative functional score was 84.3 ± 6.0 (range, 71.3-93.1) (P < .001). The mean Lysholm score was 69.3 ± 5.9 (range, 55-78) preoperatively and 88.6 ± 5.0 (range, 75-95) postoperatively (P < .001). There was no significant correlation between patients' BMI and the final clinical outcome scores (P = .311). In a small set of patients with multiligament-injured knees, valgus laxity can be effectively restored through surgical management with superficial MCL reconstruction, when the other associated ligament injuries are reconstructed as well. The subjective functional results were significantly improved postoperatively at short-term follow-up.

Is Quadriceps Tendon Autograft a Better Choice Than Hamstring Autograft for Anterior Cruciate Ligament Reconstruction? A Comparative Study With a Mean Follow-up of 3.6 Years.

PubMed

Cavaignac, Etienne; Coulin, Benoit; Tscholl, Philippe; Nik Mohd Fatmy, Nik; Duthon, Victoria; Menetrey, Jacques

2017-05-01

The quadriceps tendon (QT) autograft is known as an effective graft for anterior cruciate ligament (ACL) reconstruction and shows a similar functional outcome to the bone-patellar tendon-bone (BPTB) in randomized controlled trials, with a lesser incidence of complications. Up until now, only 2 studies have compared QT to hamstring tendon (HT) autograft. The functional outcomes of the QT technique are at least as good as those of the HT technique, with the same morbidity. Cohort study; Level of evidence, 3. Ninety-five patients underwent isolated ACL reconstruction between January 1 and December 31, 2012. Fifty underwent ACL reconstruction with the QT and 45 with the HT. The same surgical technique, fixation method, and postoperative protocol were used in both groups. The following parameters were evaluated: surgical revisions, functional outcome (Lysholm, Knee injury and Osteoarthritis Outcome Score [KOOS], Tegner, subjective International Knee Documentation Committee), joint stability (KT-1000, Lachman, pivot shift), anterior knee pain (Shelbourne-Trumper score), and isokinetic strength. Descriptive statistics are presented for these variables using the Student t test. Eighty-six patients (45 QT, 41 HT) were reviewed with a mean follow-up of 3.6 ± 0.4 years; minimum follow-up was 3 years. There were 4 reoperations in the QT group (including 1 ACL revision) and 3 in the HT group (including 2 ACL revisions) ( P > .05). The Lysholm (89 ± 6.9 vs 83.1 ± 5.3), KOOS Symptoms (90 ± 11.2 vs 81 ± 10.3), and KOOS Sport (82 ± 11.3 vs 67 ± 12.4) scores were significantly better in the QT group than in the HT group. In terms of stability, the mean side-to-side difference was 1.1 ± 0.9 mm for the QT group and 3.1 ± 1.3 mm for the HT group based on KT-1000 measurements ( P < .005). The negative Lachman component was higher in the QT group than in the HT group (90% vs 46%, P < .005). There was a trend for the negative pivot-shift component to be higher in the QT group than in the HT group (90% vs 64%, P = .052). The Shelbourne-Trumper score was the same in both groups. There was no difference between groups in terms of isokinetic strength. The use of a QT graft in ACL reconstruction leads to equal or better functional outcomes than does the use of an HT graft, without affecting morbidity.

Single-stage in situ suture repair of multiple-ligament knee injury: a retrospective study of 17 patients (18 knees).

PubMed

Hua, Xingyi; Tao, Hui; Fang, Wang; Tang, Jian

2016-01-22

Multiple-ligament injured knee (MLIK) is a rare but severe injury. Although the principles of MLIK management have progressed over the past 40 years, there is a paucity of high-quality evidence upon which to base the management of MLIK. Treatment strategies for MLIK are challenging for most orthopedic surgeons, and the optimal treatment remains controversial, especially with regard to repair vs. reconstruction of the ligaments. The aim of the present study was to observe clinical outcomes of single-stage in situ suture repair of knee dislocation with multiple-ligament injury using nonabsorbable suture material. Consecutive patients with MLIK between 2002 and 2010 were included, for a total of 25 patients with knee dislocation. 17 patients (18 knees) with closed knee dislocation with a mean follow-up of 4.8 ± 1.3 years were retrospective analyzed. All patients were treated surgically with single-stage in situ suture repair for all injured ligaments and followed a standardized postoperative rehabilitation protocol. The VAS score, satisfactory score, total SF-36 score, Lysholm score, Tegner score, the Meyers functional rating and the ranges of motion and knee stability were used to evaluate outcomes. At final follow-up, mean visual analog scale score was 2.4 ± 0.9, patient satisfaction score was 8.0 ± 1.1, 36-item Short-Form Health Survey total score was 85.5 ± 10.4, and mean Lysholm score was 87.5 ± 7.7. There were significant differences between mean preinjury and postoperative Tegner activity scores (5.6 ± 1.4 and 3.4 ± 1.7, respectively; P < 0.01) and in mean range of motion between the injured and contralateral knees (112.5 ± 8.4° and 129.6 ± 10.3°, respectively; P < 0.01). At final follow-up, no patient demonstrated obvious ligamentous laxity, and only one patient was unable to return to work. Three patients had knee joint stiffness, two had wound problems (infection or fat liquefaction), and two had heterotopic bone formation. Single-stage in situ suture repair of injured ligaments confers advantages of reliable fixation and early exercise. It could be considered as an alternate and effective option in the dislocation knee with multiple-ligament injury.

Are Female Soccer Players at an Increased Risk of Second Anterior Cruciate Ligament Injury Compared With Their Athletic Peers?

PubMed

Allen, Melissa M; Pareek, Ayoosh; Krych, Aaron J; Hewett, Timothy E; Levy, Bruce A; Stuart, Michael J; Dahm, Diane L

2016-10-01

Female soccer players have a well-known risk for anterior cruciate ligament (ACL) injury, but few studies have reported on second ACL injuries in this population. To (1) report the rates of subsequent ACL injury (ipsilateral graft rupture or contralateral tear) in competitive female soccer players, (2) compare these rates with those of other female athletes of similar competitive level, (3) determine risk factors for second ACL injury, and (4) report clinical outcome scores in this population. Cohort study; Level of evidence, 3. The medical records at a single institution were reviewed for female patients who were injured during a competitive athletic event and treated with primary ACL reconstruction (ACLR) between 1998 and 2013. Patients were followed for a mean of 68.8 months postoperatively (range, 24-115.2 months). Clinical outcome was obtained via Lysholm and International Knee Documentation Committee (IKDC) scores. Soccer players were matched 1:1 to non-soccer athletes for age, activity level, and graft type. A total of 180 female ACLR patients with a mean ± SD age of 19.6 ± 6.9 years met the study inclusion and exclusion criteria (90 soccer players and 90 non-soccer players). Soccer players sustained more second ACL injuries, including both graft failures (11% vs 1%; P < .01) and contralateral ACL tears (17% vs 4%; P < .01), compared with non-soccer players. Of the 67 patients who returned to soccer after ACLR (mean age, 17.5 years; range, 13-27 years), significantly more had graft tears compared with those who did not return to soccer (15% vs 0%, respectively; P = .04); however, the difference in contralateral ACL tears (19% for returning players vs 9% for those who did not return; P = .34) was not significant. Relatively older age (odds ratio, 1.5 per year; P = .03) was a significant risk factor for ACL graft tear but not for contralateral ACL injury. Both groups had similar mean Lysholm (96 vs 95) and IKDC scores (95 vs 96) at final follow-up. Twenty-eight percent of all female soccer players and 34% of those players who returned to soccer had a second ACL tear. Soccer players had an increased rate of both graft tear and contralateral ACL injury compared with similar non-soccer athletes. Older age and return to soccer were significant risk factors for graft rupture. © 2016 The Author(s).

Calcium phosphate cement augmentation in the treatment of depressed tibial plateau fractures with open reduction and internal fixation.

PubMed

Oztürkmen, Yusuf; Caniklioğlu, Mustafa; Karamehmetoğlu, Mahmut; Sükür, Erhan

2010-01-01

We aimed to evaluate the clinical and radiological outcomes of open reduction and internal fixation augmented with calcium phosphate cement (CPC) in the treatment of depressed tibial plateau fractures. Twenty-eight knees of 28 patients [19 males and 9 females; mean age, 41.2 years (range 22-72 years)] who had open reduction and internal fixation combined with CPC augmentation were included in this study. Seventeen fractures were Schatzker type II, 5 were type III, 3 were type IV, 2 were type V, and 1 was type VI. CPC was used to fill the subchondral bone defects in all knees. Fixation of the fragments was done with screws in 3 knees (10%). Standard proximal tibial plates or buttress plates were used in 25 knees (90%) with an additional split fragment extending distally to achieve internal fixation. Full weight-bearing was allowed in 6.4 weeks (range 6-12 weeks) after surgery. Resorption of CPC granules was defined as the decrease in the size and density of grafting material on radiographs. Rasmussen's radiological and clinical scores were determined postoperatively. Functionality was assessed with Lysholm knee scoring system. Activity was graded with Tegner's activity scale. Union was achieved in all patients with a mean follow-up of 22.2 months (range 6-36 months). There were no intraoperative complications. At the latest follow-up radiographs, resorption of the graft was observed in 25 knees (89%). Rasmussen's radiologic score was excellent in 17 patients (61%), good in 9 patients (32%), and fair in 2 patients (7%). Rasmussen's clinical score was excellent in 9 patients (32%), good in 18 patients (64%), and fair in 1 patient (4%). According to the Lysholm knee score, functional results were excellent in 16 patients (57%), good in 8 patients (29%), and fair in 4 patients (14%). Twenty-two patients (78%) achieved the preoperative activity level after surgery, and there was no significant difference between the mean preoperative and postoperative Tegner scores (4.11±0.68 and 4.04±0.64, respectively, p=0.161). CPC is a safe biomaterial with many advantages in augmenting the open reduction and internal fixation of depressed tibial plateau fractures, including elimination of morbidity associated with bone graft harvesting, the unlimited supply of bone substitute, the optimum filling of irregular bone defects, and shortening of the postoperative full weight-bearing time.

Effects of neuromuscular training on knee joint stability after anterior cruciate ligament reconstruction.

PubMed

Shim, Jae-Kwang; Choi, Ho-Suk; Shin, Jun-Ho

2015-12-01

[Purpose] This study examined the effects of neuromuscular training on knee joint stability after anterior cruciate ligament reconstruction. [Subjects and Methods] The subjects were 16 adults who underwent arthroscopic anterior cruciate reconstruction and neuromuscular training. The Lysholm scale was used to assess functional disorders on the affected knee joint. A KT-2000 arthrometer was used to measure anterior displacement of the tibia against the femur. Surface electromyography was used to detect the muscle activation of the vastus medialis oblique, vastus lateralis, biceps femoris, and semitendinosus before and after neuromuscular training. [Results] There was significant relaxation in tibial anterior displacement of the affected and sound sides in the supine position before neuromuscular training. Furthermore, the difference in the tibial anterior displacement of the affected knee joints in the standing position was reduced after neuromuscular training. Moreover, the variation of the muscle activation evoked higher muscle activation of the vastus medialis oblique, vastus lateralis, biceps femoris, and semitendinosus. [Conclusion] Neuromuscular training may improve functional joint stability in patients with orthopedic musculoskeletal injuries in the postoperative period.

Effects of neuromuscular training on knee joint stability after anterior cruciate ligament reconstruction

PubMed Central

Shim, Jae-Kwang; Choi, Ho-Suk; Shin, Jun-Ho

2015-01-01

[Purpose] This study examined the effects of neuromuscular training on knee joint stability after anterior cruciate ligament reconstruction. [Subjects and Methods] The subjects were 16 adults who underwent arthroscopic anterior cruciate reconstruction and neuromuscular training. The Lysholm scale was used to assess functional disorders on the affected knee joint. A KT-2000 arthrometer was used to measure anterior displacement of the tibia against the femur. Surface electromyography was used to detect the muscle activation of the vastus medialis oblique, vastus lateralis, biceps femoris, and semitendinosus before and after neuromuscular training. [Results] There was significant relaxation in tibial anterior displacement of the affected and sound sides in the supine position before neuromuscular training. Furthermore, the difference in the tibial anterior displacement of the affected knee joints in the standing position was reduced after neuromuscular training. Moreover, the variation of the muscle activation evoked higher muscle activation of the vastus medialis oblique, vastus lateralis, biceps femoris, and semitendinosus. [Conclusion] Neuromuscular training may improve functional joint stability in patients with orthopedic musculoskeletal injuries in the postoperative period. PMID:26834316

Efficacy of isokinetic exercise on functional capacity and pain in patellofemoral pain syndrome.

PubMed

Alaca, Ridvan; Yilmaz, Bilge; Goktepe, A Salim; Mohur, Haydar; Kalyon, Tunc Alp

2002-11-01

To assess the effect of an isokinetic exercise program on symptoms and functions of patients with patellofemoral pain syndrome. A total of 22 consecutive patients with the complaint of anterior knee pain who met the inclusion criteria were recruited to assess the efficacy of isokinetic exercise on functional capacity, isokinetic parameters, and pain scores in patients with patellofemoral pain syndrome. A total of 37 knees were examined. Six-meter hopping, three-step hopping, and single-limb hopping course tests were performed for each patient with the measurements of the Lysholm scale and visual analog scale. Tested parameters were peak torque, total work, average power, and endurance ratios. Statistical analyses revealed that at the end of the 6-wk treatment period, functional and isokinetic parameters improved significantly, as did pain scores. There was not statistically significant correlation between different groups of parameters. The isokinetic exercise treatment program used in this study prevented the extensor power loss due to patellofemoral pain syndrome, but the improvement in the functional capacity was not correlated with the gained power.

Healing of the Acutely Injured Anterior Cruciate Ligament: Functional Treatment with the ACL-Jack, a Dynamic Posterior Drawer Brace

PubMed Central

Reischl, Nikolaus; Rönn, Karolin; Magnusson, Robert A.; Gautier, Emanuel; Jakob, Roland P.

2016-01-01

Background. The injured anterior cruciate ligament (ACL) has a limited healing capacity leading to persisting instability. Hypothesis/Purpose. To study if the application of a brace, producing a dynamic posterior drawer force, after acute ACL injury reduces initial instability. Study Design. Cohort study. Methods. Patients treated with the ACL-Jack brace were compared to controls treated with primary ACL reconstruction und controls treated nonsurgically with functional rehabilitation. Measurements included anterior laxity (Rolimeter), clinical scores (Lysholm, Tegner, and IKDC), and MRI evaluation. Patients were followed up to 24 months. Results. Patients treated with the ACL-Jack brace showed a significant improvement of anterior knee laxity comparable to patients treated with ACL reconstruction, whereas laxity persisted after nonsurgical functional rehabilitation. The failure risk (secondary reconstruction necessary) of the ACL-Jack group was however 21% (18 of 86) within 24 months. Clinical scores were similar in all treatment groups. Conclusion. Treatment of acute ACL tears with the ACL-Jack brace leads to improved anterior knee laxity compared to nonsurgical treatment with functional rehabilitation. PMID:28053787

Suprapatellar Versus Infrapatellar Tibial Nail Insertion: A Prospective Randomized Control Pilot Study.

PubMed

Chan, Daniel S; Serrano-Riera, Rafael; Griffing, Rebecca; Steverson, Barbara; Infante, Anthony; Watson, David; Sagi, H Claude; Sanders, Roy W

2016-03-01

The purpose of this OTA-approved pilot study was to compare the clinical and functional outcomes of the knee joint after infrapatellar (IP) versus suprapatellar (SP) tibial nail insertion. Prospective, randomized. Level I trauma center. After institutional review board approval, skeletally mature patients with OTA 42 tibial shaft fractures were randomized into either an IP or SP nail insertion group after informed consent was obtained. The SP also underwent prenail and postnail insertion patella-femoral (PF) joint arthroscopy. Patients underwent follow-up (6 weeks, 3, 6, and 12 months) with standard radiographs, as well as visual analog score and pain diagram documentation. At the 6-month and 12-month visits, knee function questionnaires (Lysholm knee scale and SF-36) were completed. Magnetic resonance imaging/image (MRI) of the affected knee was obtained at 12 months. Ten patients in each group were required for a power analysis for the anticipated larger randomized control trial, but enrollment in each arm was not limited because of known problems with patient follow-up over a 12-month period. A total of 41 patients/fractures were enrolled in this study. Of those, only 25 patients/fractures (14 IP, 11 SP) fully complied with and completed 12 months of follow-up. Six of 11 SP presented with articular changes (chondromalacia) in the PF joint during the preinsertion arthroscopy. Three patients displayed a change in the articular cartilage based on postnail insertion arthroscopy. At 12 months, all fractures in both groups had proceeded to union. There were no differences between the affected and unaffected knee with respect to range of motion. Functional visual analog score and Lysholm knee scores showed no significant differences between groups (P > 0.05). The SF-36v2 comparison also revealed no significant differences in the overall score, all 4 mental components, and 3/4 physical components (P > 0.05). The bodily pain component score was superior in the SP group (45 vs. 36, P = 0.035). All 11 SP patients obtained MRIs at 1 year. Five of these patients had evidence of chondromalacia on MRI. These findings did not correlate with either the prenail or postnail insertion arthroscopy. Importantly, no patient in the SP group with postnail insertion arthroscopic changes had PF joint pain at 1 year. Overall, there seemed to be no significant differences in pain, disability, or knee range of motion between these 2 tibial intramedullary nail insertion techniques after 12 months of follow-up. Based on this pilot study data, larger prospective trial with long-term follow-up is warranted. Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Quadriceps Strength Deficit at 6 Months After ACL Reconstruction Does Not Predict Return to Preinjury Sports Level.

PubMed

Novaretti, João Victor; Franciozi, Carlos Eduardo; Forgas, Andrea; Sasaki, Pedro Henrique; Ingham, Sheila Jean McNeill; Abdalla, Rene Jorge

There is a lack of literature-based objective criteria for return to sport after anterior cruciate ligament (ACL) injury. Establishing such objective criteria is crucial to improving return to sport after ACL reconstruction (ACLR). Patients who return to their preinjury level of sport will have higher isokinetic, postural stability, and drop vertical jump test scores 6 months after surgery and greater patient satisfaction compared with those who did not. Additionally, quadriceps strength deficit cutoff values of 80% and 90% would differentiate patients who returned to preinjury sports level from those who did not. Cohort study. Level 3. A retrospective search was conducted to identify all patients who underwent ACLR and completed isokinetic evaluation, postural stability analysis, and drop vertical jump testing at 6 months postoperatively. Patients were asked to complete 3 questionnaires at a minimum 1 year after surgery. Chi-square and logistic regression analyses were used for categorical dependent variables, while the Student t test, Pearson correlation, or analyses of variance with Bonferroni post hoc testing were used for continuous dependent variables. A post hoc power analysis was completed. Based on the results regarding correlations between return to preinjury level and all other variables, effect sizes from 0.24 to 3.03 were calculated. With these effect sizes, an alpha of 0.05 and sample size of 58, a power ranging from 0.15 to 0.94 was calculated. The rates of return to preinjury level and to any sports activity were 53.4% and 84.4%. Those who were able to return to their preinjury level of sport (n = 33) showed significantly higher Lysholm (91.6 ± 9.7 vs 76.7 ± 15.4) and International Knee Documentation Committee (IKDC) (83.6 ± 10.6 vs 69.8 ± 14.6) values compared with those who were unable to return to their preinjury level of sport (n = 25) ( P < 0.001). No significant differences were found for the clinical evaluations between those who were and those who were not able to return at the same level for the clinical evaluations (isokinetic evaluation, postural stability, drop vertical jump test) ( P > 0.05). No significant differences were found when comparing quadriceps strength deficit with cutoff values of 80% and 90% for return to preinjury activity level (Tegner), Lysholm, and IKDC scores. Quadriceps strength deficit, regardless of cutoff value (80% or 90%), at 6 months after ACLR does not predict return to preinjury level of sport. Patients who returned to sport at their preinjury level were more satisfied with their reconstruction compared with those who did not. Quadriceps strength deficit is not a reliable predictor of return to sports, and therefore it should not be used as the single criterion in such evaluations.

Outcomes and Return to Sport After Revision Anterior Cruciate Ligament Reconstruction in Adolescent Athletes

PubMed Central

Saper, Michael; Pearce, Stephanie; Shung, Joseph; Zondervan, Robert; Ostrander, Roger; Andrews, James R.

2018-01-01

Background: The number of adolescent anterior cruciate ligament (ACL) injuries is rising with increased participation in higher level athletics at earlier ages. With an increasing number of primary ACL reconstructions (ACLRs) comes a rise in the incidence of revision ACLRs. Purpose: To evaluate the clinical results of revision ACLR across a group of high-level adolescent athletes with at least 2-year follow-up. Study Design: Case series; Level of evidence, 4. Methods: A retrospective review of 21 adolescent athletes (age range, 10-19 years) who underwent revision ACLR with at least 2-year follow-up was conducted. Patient-reported outcome measures (PROMs) included the International Knee Documentation Committee (IKDC) Subjective Knee Evaluation Form, Lysholm knee scoring scale, Tegner activity level scale, and modified Cincinnati Knee Rating System. Return to sport (RTS) and overall patient satisfaction were also assessed. Results: The mean age at the time of surgery was 16.5 years (range, 14-19 years), and the mean follow-up was 46.4 months (range, 24-97 months); 42.9% of patients were female, and 52.4% of patients participated in collision sports. The mean time to failure after primary ACLR was 13.1 ± 8.0 months, and the most common mechanism of failure was noncontact in at least 66.7% of cases. The revision graft type included bone–patellar tendon–bone (BPTB) in 71.4% of cases; 26.7% of BPTB grafts were from the contralateral extremity. Concomitant procedures were performed for intra-articular lesions in 71.4% of patients. The mean patient satisfaction rate was 95.3%. There were 3 cases of a graft reinjury at a mean of 25 months postoperatively. The mean PROM scores were as follows: IKDC, 87.5 ± 12.7; Tegner, 7.2 ± 2.0; Lysholm, 93.7 ± 9.8; and Cincinnati, 93.4 ± 10.0. Of those attempting to RTS, 68.4% of patients successfully returned at the same level of competition. Patients with a lateral compartment chondral injury were less likely to RTS (P < .05). Independent variables shown to have no significant relationship to PROMs or RTS included age, follow-up, sport classification, associated meniscal tears, revision graft size/type, and concomitant procedures. Conclusion: Revision ACLR can be an effective surgical option in adolescents participating in collision and contact sports, with good to excellent subjective outcome scores. At a minimum 2-year follow-up, a graft rupture after revision ACLR occurred in 14% of cases. Of the athletes attempting to RTS, 68.4% returned to their preinjury level of competition. PMID:29662910

Long-Term Degradation of Self-Reinforced Poly-Levo (96%)/Dextro (4%)-Lactide/β-Tricalcium Phosphate Biocomposite Interference Screws.

PubMed

Barber, F Alan; Dockery, W D

2016-04-01

To evaluate the long-term in vivo degradation of biocomposite interference screws made with self-reinforced poly-levo (96%)/dextro (4%)-lactide/β-tricalcium phosphate [SR-PL(96)/D(4)LA/β-TCP]. A study of the in vivo biologic behavior of an SR-PL(96)/D(4)LA/β-TCP biocomposite interference screw was initiated in 2011 using an anterior cruciate ligament (ACL) reconstruction model. Eight patients undergoing a bone-patellar tendon-bone ACL reconstruction fixed at both the femur and tibia with an SR-PL(96)/D(4)LA/β-TCP screw at least 36 months earlier were evaluated by physical, radiographic, and computed tomography (CT) evaluations. Lysholm, Tegner, Cincinnati, and International Knee Documentation Committee scores were obtained. After incomplete degradation was observed in these 8 patients, a subsequent series of 17 patients were evaluated at a minimum of 48 months after surgery. By use of CT scans, Hounsfield unit (HU) data were obtained at the femoral and tibial screw and other bone sites. An ossification quality score (range, 1 to 4) was used to determine osteoconductivity at the screw sites. Eleven male and 6 female patients evaluated by CT scan and radiographs at a mean of 50 months (range, 48 to 61 months) after surgery showed bone plug healing to the tunnel wall and the SR-PL(96)/D(4)LA/β-TCP screws were replaced with material that was calcified and non-trabecular. Osteoconductivity was present in 24 of 34 tunnels (70.58%) and nearly complete or complete (type 3 or 4 ossification) in 11 of 34 (32.35%). Mean screw site densities (femoral, 242 HU; tibial, 240 HU) were consistent with cancellous bone density. One positive pivot-shift test was found. Lysholm, Cincinnati, Tegner, and International Knee Documentation Committee activity scores improved from 44.5, 40.7, 2.3, and 1.4, respectively, preoperatively to 92, 92.4, 5.7, and 3.3, respectively, at follow-up (P < .0001). The average postoperative Single Assessment Numeric Evaluation score was 92. The mean KT arthrometer (MEDmetric, San Diego, CA) difference was 1.25 mm. The SR-PL(96)/D(4)LA/β-TCP interference screw was replaced with calcified, non-trabecular material 4 years after implantation in a bone-patellar tendon-bone ACL reconstruction model. Osteoconductivity was confirmed in 24 of 34 screw sites (71%), with nearly complete or complete filling in 11 of 34 (33%). The SR-PL(96)/D(4)LA/β-TCP biocomposite interference screw is osteoconductive. Level IV, therapeutic case series. Copyright © 2016 The Arthroscopy Association of North America. All rights reserved.

The FasT-Fix Repair Technique for Ramp Lesion of the Medial Meniscus.

PubMed

Li, Wei-Ping; Chen, Zhong; Song, Bin; Yang, Rui; Tan, Weiquan

2015-03-01

This technical note describes a new arthroscopic technique to repair the peripheral attachment lesion of the posterior horn of the medial meniscus. The operation was performed under arthroscopy using a standard anterior portal. A FasT-Fix needle was inserted obliquely close to the tibial plateau and the first implant was inserted into the joint capsule depending on its bending angle underneath the meniscus. The second implant was inserted through 1/3 periphery of the meniscus into the meniscocapsular area. The pre-tied self-sliding knot was tensioned to achieve secure fixation of the posterior meniscal peripheral attachment at the original attachment point. From August 2011 to February 2014, 23 knees were diagnosed as ramp lesion, underwent meniscal repair using FasT-Fix technique. All patients were followed up for average 14 months. The Lysholm score improved from preoperative 64.4±4.52 to postoperative 91.2±4.60. We believe that the FasT-Fix technique via the standard anterior portal can be a more convenient and less traumatic alternative for repair of the peripheral attachment lesion of the posterior horn of the medial meniscus in the anterior cruciate ligament deficient knee.

The Top 100 Cited Articles in Clinical Orthopedic Sports Medicine.

PubMed

Nayar, Suresh K; Dein, Eric J; Spiker, Andrea M; Bernard, Johnathan A; Zikria, Bashir A

2015-08-01

Orthopedic sports medicine continues to evolve, owing much of its clinical management and practice to rigorous academic research. In this review, we identify and describe the top 100 cited articles in clinical sports medicine and recognize the authors and institutions driving the research. We collected articles (excluding basic science, animal, and cadaveric studies) from the 25 highest-impact sports medicine journals and analyzed them by number of citations, journal, publication date, institution, country, topic, and author. Mean number of citations was 408 (range, 229-1629). The articles were published in 7 journals, most in the 1980s to 2000s, and represented 15 countries. Thirty topics were addressed, with a heavy emphasis on anterior cruciate ligament injury and reconstruction, knee rating systems, rotator cuff reconstruction, and chondrocyte transplantation. The 3 most cited articles, by Insall and colleagues, Constant and Murley, and Tegner and Lysholm, addressed a knee, a shoulder, and another knee rating system, respectively. Several authors contributed multiple articles. The Hospital for Special Surgery and the University of Bern contributed the most articles (5 each). This study provides a comprehensive list of the past century's major academic contributions to sports medicine. Residents and fellows may use this list to guide their scholarly investigations.

[Treatment of conmminuted patellar fractures with internal Ni-Ti patellar concentrator and tension bind wire fixation].

PubMed

Tan, Hong-lie; Qian, Chen; Zhao, Jin-kun; Shi, Yan; Zhou, Qi

2009-02-01

To study the clinical efficacy of the treatment of comminuted patellar fractures with internal NiTi-Patellar concentrator and tension bind wire fixation. From March 2004 to June 2007, 38 cases of fresh comminuted patellar fractures were treated with internal NiTi-Patellar concentrator and tension bind wire fixation. There were 25 males and 13 females,ranging from 21 to 64 years (mean 42.5 years). All were comminuted fractures with displacement, 16 cases were 3 fragments, 14 cases were 4 fragments, 8 cases were 5 fragments. There were other fractures in 8 cases. During followed-up, knee function and complications were evaluated. All patients were followed up for 8 to 24 months (mean 15 months) and obtained complete bone union. No case of implant was loosening and fragment displacement, traumatic arthritis occured in 2 cases. Under Lysholm & Gillquist score, the results were excellent in 17 cases, good in 19, fair in 2. Internal Ni-Ti-Patellar concentrator and tension bind wire fixation is one of the ideal methods for the treatment of comminuted patellar fracture, which could provide satisfied reduction, reliable fixation and good functional recovery.

Arthroscopic anterior cruciate ligament distal graft rupture: a method of salvage.

PubMed

Larrain, Mario V; Mauas, David M; Collazo, Cristian C; Rivarola, Horacio F

2004-09-01

We describe a rare case of anterior cruciate ligament (ACL) distal graft rupture in a high-demand rugby player. Fifteen months before this episode, he underwent an ACL reconstruction (autologous patellar tendon graft surgery) plus posterolateral reconstruction with direct suture and fascia lata augmentation. Radiographs revealed correct positioning of tunnels and fixation screws. Magnetic resonance imaging showed that the graft rupture was close to the tibial bone block and presented a signal compatible to the optimal graft incorporation. Surgery recording and clinical records were reviewed. No failures were found. After careful evaluation we concluded that the primary cause of failure was trauma. Based on these findings a salvage surgery technique was performed. Return to sport activities was allowed after four months when sufficient strength and range of motion had returned. Recent follow up (2 years 8 months postoperative) has shown an excellent result with a Lysholm score of 100, International Knee Documentation Committee (IKDC) score of 100, and a KT-1000 arthrometer reading of between 0 and 5 mm. The athlete has returned to his previous professional level. We believe this simple, specific, nonaggressive, and anatomic reconstructive technique may be used in the case of avulsion or distal detachment caused only by trauma and with a graft that is likely to heal.

Arthroscopic Repair of the Medial Meniscus Radial/Oblique Tear Prevents the Progression of Meniscal Extrusion in Mildly Osteoarthritic Knees.

PubMed

Furumatsu, Takayuki; Kodama, Yuya; Kamatsuki, Yusuke; Hino, Tomohito; Ozaki, Toshifumi

2017-10-01

Extrusion of the medial meniscus (MM) is associated with knee joint pain in osteoarthritic knees. The relationships among MM radial/oblique tears, MM extrusion (MME), and the effect of arthroscopic meniscal repair are not established. Here we evaluated the effects of arthroscopic all-inside MM repair on MME and the clinical outcomes in patients with radially oriented MM tears and mildly osteoarthritic knees. Twenty patients with a symptomatic radial or oblique tear of the MM posterior segment, MME ≥2.5 mm, and mildly osteoarthritic knees were treated using FasT-Fix 360 All-inside Meniscal Suture devices. We used magnetic resonance imaging (MRI) to measure the patients' MM body width (MMBW), absolute MME, and relative MME. The Japanese Knee Injury and Osteoarthritis Outcome Score, Lysholm, Tegner, IKDC Subjective Knee Evaluation, and Visual Analogue Scale scores were obtained. Arthroscopic all-inside MM repair prevented increases of absolute and relative MME. The preoperative and 3- and 12-month MRI-based MMBW values were similar. Over a 24-month follow-up after the MM repairs, the clinical scores showed significant improvements. Our results suggest that all-inside meniscal repairs would be useful in preventing the progression of MME in patients suffering from symptomatic MM radial/oblique tears associated with mildly osteoarthritic knees.

ANATOMICAL RECONSTRUCTION OF ANTERIOR CRUCIATE LIGAMENT OF THE KNEE: DOUBLE BAND OR SINGLE BAND?

PubMed

Zanella, Luiz Antonio Zanotelli; Junior, Adair Bervig; Badotti, Augusto Alves; Michelin, Alexandre Froes; Algarve, Rodrigo Ilha; de Quadros Martins, Cesar Antonio

2012-01-01

To evaluate the double-band and single-band techniques for anatomical reconstruction of the anterior cruciate ligament of the knee and demonstrate that the double-band technique not only provides greater anterior stability but also causes less pain and a better subjective patient response. We selected 42 patients who underwent anterior cruciate ligament reconstruction, by means of either the single-band anatomical reconstruction technique, using flexor tendon grafts with two tunnels, or the double-band anatomical reconstruction technique, using four tunnels and grafts from the semitendinosus and gracilis tendons. All fixations were performed using interference screws. There was no variation in the sample. Before the operation, the objective and subjective IKDC scores, Lysholm score and length of time with the injury were evaluated. All these variables were reassessed six months later, and the KT-1000 correlation with the contralateral knee was also evaluated. There was no significant difference between the two groups in subjective evaluations, but the single-band group showed better results in relation to range of motion and objective evaluations including KT-1000 (with statistical significance). Our study demonstrated that there was no difference between the two groups in subjective evaluations, but better results were found using the single-band anatomical technique, in relation to objective evaluations.

ANATOMICAL RECONSTRUCTION OF ANTERIOR CRUCIATE LIGAMENT OF THE KNEE: DOUBLE BAND OR SINGLE BAND?

PubMed Central

Zanella, Luiz Antonio Zanotelli; Junior, Adair Bervig; Badotti, Augusto Alves; Michelin, Alexandre Froes; Algarve, Rodrigo Ilha; de Quadros Martins, Cesar Antonio

2015-01-01

Objective: To evaluate the double-band and single-band techniques for anatomical reconstruction of the anterior cruciate ligament of the knee and demonstrate that the double-band technique not only provides greater anterior stability but also causes less pain and a better subjective patient response. Methods: We selected 42 patients who underwent anterior cruciate ligament reconstruction, by means of either the single-band anatomical reconstruction technique, using flexor tendon grafts with two tunnels, or the double-band anatomical reconstruction technique, using four tunnels and grafts from the semitendinosus and gracilis tendons. All fixations were performed using interference screws. There was no variation in the sample. Before the operation, the objective and subjective IKDC scores, Lysholm score and length of time with the injury were evaluated. All these variables were reassessed six months later, and the KT-1000 correlation with the contralateral knee was also evaluated. Results: There was no significant difference between the two groups in subjective evaluations, but the single-band group showed better results in relation to range of motion and objective evaluations including KT-1000 (with statistical significance). Conclusion: Our study demonstrated that there was no difference between the two groups in subjective evaluations, but better results were found using the single-band anatomical technique, in relation to objective evaluations. PMID:27042621

Relationship between bony tunnel and knee function in patients after patellar dislocation triple surgeries—a CT-based study

NASA Astrophysics Data System (ADS)

Qin, Le; Li, Mei; Yao, Weiwu; Shen, Ji

2017-01-01

We aimed to assess the CT-based bony tunnel valuations and their correlation with knee function after patellar dislocation triple surgeries. A retrospective study was performed on 66 patients (70 knees) who underwent patellar dislocation triple surgeries. The surgery was MPFL reconstruction primarily, combined with lateral retinaculum release and tibial tubercle osteotomy. CT examinations were performed to determine the femoral tunnel position, along with the patellar and femoral tunnel width 3 days and more than 1 year after operation for follow-up. Functional evaluation based on Kujala and Lysholm scores was also implemented. We compared tunnel width of the first and last examinations and correlated femoral tunnel position of the last examination with knee function. At the last follow-up, femoral tunnel position in the anterior-posterior direction was moderately correlated with knee function. Femoral tunnel position in the proximal-distal direction was not associated with postoperative knee function. Patellar and femoral tunnel width increased significantly at the last follow-up. However, no significant functional difference was found between patients with and without femoral tunnel enlargement. Our results suggested that the tunnel malposition in anterior-posterior position based on CT was related to impaired knee function during the follow-ups.

Long-Term Outcomes of Anterior Cruciate Ligament Reconstruction Using Either Synthetics With Remnant Preservation or Hamstring Autografts: A 10-Year Longitudinal Study.

PubMed

Chen, Tianwu; Zhang, Peng; Chen, Jiwu; Hua, Yinghui; Chen, Shiyi

2017-10-01

The optimal graft choice of anterior cruciate ligament (ACL) reconstruction remains controversial. To compare the outcomes, especially the long-term cumulative failure rate, of ACL reconstruction using either synthetics with remnant preservation or hamstring autografts (4-strand semitendinosus and gracilis tendons). Cohort study; Level of evidence, 2. A total of 133 patients who underwent ACL reconstruction (synthetics: n = 43; hamstring autografts: n = 90) between July 2004 and December 2007 were included. Questionnaires (Tegner activity scale, Lysholm knee scale, and International Knee Documentation Committee [IKDC] subjective form) were completed preoperatively and at 6 months, 1 year, 5 years, and 10 years postoperatively. The Knee injury and Osteoarthritis Outcome Score (KOOS) was additionally applied at 10 years' follow-up. The physical examination was based on the 2000 IKDC form. The manual maximum side-to-side difference (KT-1000 arthrometer), single-hop test, thigh muscle atrophy, and joint degeneration (Kellgren and Lawrence classification) were evaluated. The Kaplan-Meier curve and log-rank test (Mantel-Cox, 95% CI) were used to compare graft survivorship. Ten years postoperatively, 111 patients were available, with 38 (88.4%) patients (mean age, 27.6 ± 9.3 years; 28 men) with synthetics and 73 (81.1%) patients (mean age, 28.6 ± 8.8 years; 64 men) with hamstring autografts. Among them, 104 patients (synthetics: n = 35 [81.4%]; hamstring autografts: n = 69 [76.7%]) completed subjective evaluations, and 89 patients (synthetics: n = 30 [69.8%]; hamstring autografts: n = 59 [65.6%]) completed objective evaluations. For hamstring autografts and synthetics, the cumulative failure rates were 8.2% and 7.9%, respectively, and the log-rank test demonstrated no significant difference between the 2 Kaplan-Meier survival curves ( P = .910). At 6 months postoperatively, for hamstring autografts and synthetics, the mean Lysholm score was 83.0 ± 7.8 and 88.1 ± 7.5, respectively ( P < .001); the mean IKDC score was 83.8 ± 7.8 and 86.9 ± 4.5, respectively ( P = .036); and the mean Tegner score was 3.7 ± 1.1 and 5.0 ± 1.5, respectively ( P < .001). At 1 year postoperatively, the mean Tegner score was 5.5 ± 1.9 and 6.5 ± 2.0, respectively ( P = .011). No statistically significant difference was observed on other subjective evaluation findings, physical examination findings (overall IKDC grade A: 45.8% of hamstring autografts, 50.0% of synthetics), side-to-side difference (1.5 ± 1.5 mm for synthetics, 2.4 ± 2.1 mm for hamstring autografts), single-hop test findings (grade A: 84.7% of hamstring autografts, 93.3% of synthetics), grade A/B thigh muscle atrophy (88.1% of hamstring autografts, 93.3% of synthetics), ipsilateral radiographic osteoarthritis (55.9% of hamstring autografts, 50.0% of synthetics), and graft survivorship. In this prospective cohort study, primary ACL reconstruction using either synthetics with remnant preservation or hamstring autografts showed satisfactory outcomes, especially the long-term cumulative failure rate, at 10 years postoperatively. Patient-reported outcomes suggested that symptom relief and restoration of function might occur earlier in those with synthetics.

[Clinical natural development in human meniscus injury].

PubMed

Hong-hai, X u; Zhang, Feng; Liu, Ning; Zheng, Jing-Jing; Zhang, Yin-Ping; Zhao, Quan-min; Guo, Xiong; Yu, Min; Liu, Zong-Zhi; Sun, Zheng-Ming; Zou, Qing-Yang; Liu, Cong

2013-10-01

To investigate the changes of clinic and wound edge of the meniscus without treatment in order to provide a theoretical basis for clinical treatment. From January 2001 to December 2011,68 patients with knee injury without diagnosis and treatment were selected in the study. According to clinical symptoms (pain,interlocking,instability, etc.) and knee MRI,32 patients were diagnosed as meniscus injury and underwent the arthroscopy. Total meniscectomy was performed in 32 cases on account of impossible repair of the meniscus. There were 21 males and 11 females,ranging in age from 15 to 49 years old with an average age of 25 years old,with an average time from diagnosis to arthroscopy for 46 weeks. Observation indexes included 1Preoperative and postoperative Lysholm scores of knee. 2Position,type and status of injury by arthroscopy. 3Observation of histology. With the procedure as follow: tissue samples were taken from different positions of the edge of the meniscus wound,and were divided into two parts. One part of sample was fixed with formalin, sliced with paraffin imbedding,and observed under an electron microscope after HE staining,and the other part of the sample was fixed with glutaraldehyde of 3%,sliced with ethoxyline imbedding ,and observed under an electron microscope after Lead Citrate staining. Thirty-two patients were followed up more than one year. There was significant differences in Lysholm scores bewteen preoperative and postoperative 3 months (t=15.6,P<0.01). Arthroscopy showed typical differences in 28 cases between the middle and the two ends of the wound edge and atypical differences in 4 cases. Light microscope showed typical manifestations in 26 cases, a few epithelioid cells could been seen fat the middle of the wound edge as well as cells tissue healing (such as fibroblasts) at the junction of each end,and atypical manifestations in 2 cases. Electron microscope showed typical manifestation in 25 cases and atypical manifestations in 3 cases. Typical manifestations in electron microscope showed the atrophic state tions in 25 cases and atypical manifestations in 3 cases. Typical manifestations electron microscope showed the atrophic state of nuclei and kytoplasm of cell (isogenous cells and epithelioid cells) at the middle of the wound edge; at the either junction of the wound edge, the fibroblasts exhibited an enlarged volume with many protuberances; the nuclei also increased in size, and the cytoplasm contained major rough endoplasmic reticulum, free ribosomes and Golgi complex; chondrocytes were round or oval with a large,round nucleus ; a large amount of rough endoplasmic reticulum and many free ribosomes could be observed in the cytoplasm;cartilage lacunae were observed surrounding chondrocytes. Weight loading activities with meniscus injury without treatment or before healing will increase the length of the wound and aggravate clinical symptoms. These findings indicate that early diagnosis and treatment combined with timely and effective immobilization is a key to the healing of meniscus injury and avoiding further surgery. The recent clinical effect of total meniscectomy is satisfacory in treating impossible repair meniscus.

Pullout Fixation of Posterior Medial Meniscus Root Tears: Correlation Between Meniscus Extrusion and Midterm Clinical Results

PubMed

Chung, Kyu Sung; Ha, Jeong Ku; Ra, Ho Jong; Nam, Gun Woo; Kim, Jin Goo

2017-01-01

Medial meniscus posterior root tears (MMPRTs) lead to extrusion of the meniscus during weightbearing as well as loss of the ability of the meniscus to generate hoop stress. This loss of load-sharing ability leads to progressive arthritic changes. However, there have been no studies that correlate the correction of meniscus extrusion with clinical outcomes. Decreased meniscus extrusion is associated with better clinical and radiographic outcomes compared with increased meniscus extrusion after MMPRT pullout fixation. Case-control study; Level of evidence, 3. A total of 39 patients who underwent MMPRT pullout fixation and had been observed for more than 5 years were recruited for this study. The mean follow-up period was 69.8 months. Participants were categorized into 2 groups according to the direction of meniscus extrusion: group A (increased extrusion; 23 patients) and group B (decreased extrusion; 16 patients). Meniscus extrusion was assessed in the coronal plane on magnetic resonance imaging preoperatively and at 1 year postoperatively. The postoperative clinical outcomes (Lysholm and International Knee Documentation Committee [IKDC] scores) and radiographic results (Kellgren-Lawrence [K-L] grade and medial joint space) were compared between groups. Meniscus extrusion in group A increased significantly from a mean (±SD) of 3.5 ± 0.9 mm preoperatively to 5.1 ± 1.4 mm at 1 year postoperatively ( P < .001), whereas in group B, it decreased significantly from 4.1 ± 1.3 mm preoperatively to 3.5 ± 1.4 mm at 1 year postoperatively ( P < .001). The K-L arthritis grade (0/1/2/3/4) significantly progressed in group A (from 2/12/9/0/0 preoperatively to 0/1/14/8/0 postoperatively, respectively; P = .009) but not in group B (from 1/11/4/0/0 preoperatively to 0/6/8/2/0 postoperatively, respectively; P = .274). The mean final Lysholm and IKDC scores in group B (88.1 ± 12.1 and 79.0 ± 11.4, respectively) were significantly better than those in group A (81.0 ± 9.0 and 71.1 ± 7.8, respectively) ( P < .05). There was less medial joint space narrowing at final follow-up in group B (0.6 ± 0.8 mm) than in group A (1.1 ± 0.6 mm) ( P = .015). Progression of the K-L arthritis grade was seen in 50% (8/16) of the patients in group B compared with 87% (20/23) of the patients in group A ( P = .027). The current study demonstrates that in patients with MMPRTs, pullout fixation leads to favorable midterm outcomes, regardless of meniscus extrusion at 1-year follow-up. However, patients with decreased meniscus extrusion at postoperative 1 year have more favorable clinical scores and radiographic findings at midterm follow-up than those with increased extrusion at 1 year. This study indicates that one of the main goals of the repair of MMPRTs is to reduce meniscus extrusion as much as possible.

Is It Necessary to Repair Stable Ramp Lesions of the Medial Meniscus During Anterior Cruciate Ligament Reconstruction? A Prospective Randomized Controlled Trial.

PubMed

Liu, Xin; Zhang, Hui; Feng, Hua; Hong, Lei; Wang, Xue-Song; Song, Guan-Yang

2017-04-01

A special type of meniscal lesion involving the peripheral attachment of the posterior horn of the medial meniscus (PHMM), termed a "ramp lesion," is commonly associated with an anterior cruciate ligament (ACL) injury. However, its treatment is still controversial. Recently, stable ramp lesions treated with abrasion and trephination alone have been shown to have good clinical outcomes after ACL reconstruction. Stable ramp lesions treated with abrasion and trephination alone during ACL reconstruction will result in similar clinical outcomes compared with those treated with surgical repair. Randomized controlled trial; Level of evidence, 2. A prospective randomized controlled study was performed in 91 consecutive patients who had complete ACL injuries and concomitant stable ramp lesions of the medial meniscus. All patients were randomly allocated to 1 of 2 groups based on whether the stable ramp lesions were surgically repaired (study group; n = 50) or only abraded and trephined (control group; n = 41) during ACL reconstruction. All surgical procedures were performed by a single surgeon who was blinded to the functional assessment findings of the patients. The Lysholm score, subjective International Knee Documentation Committee (IKDC) score, and stability assessments (pivot-shift test, Lachman test, KT-1000 arthrometer side-to-side difference, and KT-1000 arthrometer differences of <3, 3-5, and >5 mm) were evaluated preoperatively and at the last follow-up. Moreover, magnetic resonance imaging (MRI) was used to evaluate the healing status of the ramp lesions. All consecutive patients who were screened for eligibility from August 2008 to April 2012 were enrolled and observed clinically. There were 40 patients in the study group and 33 patients in the control group who were observed for at least 2 years. At the final follow-up, there were no significant differences between the study group and the control group in terms of the mean Lysholm score (88.7 ± 4.8 vs 90.4 ± 5.8, respectively; P = .528), mean subjective IKDC score (83.6 ± 3.7 vs 82.2 ± 4.5, respectively; P = .594), pivot-shift test results ( P = .658), Lachman test results ( P = .525), KT-1000 arthrometer side-to-side difference (1.6 ± 1.2 vs 1.5 ± 1.1, respectively; P = .853), or KT-1000 arthrometer grading ( P = .738). Overall, for both groups (n = 73), 67 patients showed completely healed (38 study, 29 control), 3 showed partially healed (1 study, 2 control), and 3 showed nonhealed (1 study, 2 control) signals on follow-up MRI when evaluating the healing status of the ramp lesions. There was no significant difference regarding the healing status of the ramp lesions between the 2 groups ( P = .543). This prospective randomized controlled trial showed that, in terms of subjective scores, knee stability, and meniscal healing status, concomitant stable ramp lesions of the medial meniscus treated with abrasion and trephination alone during ACL reconstruction resulted in similar clinical outcomes compared with those treated with surgical repair.

[EFFECTIVENESS OF ONE-STAGE REPAIR AND RECONSTRUCTION FOR KNEE DISLOCATION WITH MULTIPLE LIGAMENT INJURIES].

PubMed

Sun, Zhengyu; Zhang, Chenghao; Tang, Xin; Chen, Gang; Li, Jian

2016-06-08

To evaluate the surgical procedure and short-term effectiveness of one-stage repair and reconstruction of knee dislocation with multiple ligament injuries (KDMLI). Between September 2010 and April 2014, 9 cases (9 knees) of KDMLI were treated. There were 7 males and 2 females with an average age of 42 years (range, 27-57 years). Injury was caused by traffic accident in 3 cases, heavy-weight crushing in 3 cases, sports sprain in 2 cases, and falling from height in 1 case. The average time from injury to operation was 11 days (range, 3-19 days). The results of posterior drawer test and Lachman test were positive in all patients. The results of varus stress testing were three-degree positive in 4 cases, and the results of valgus stress testing were three-degree positive in 6 cases. The Lysholm score of knee was 27.2±6.3; the International Knee Documentation Committee (IKDC) score was 29.7±6.5; and the range of motion (ROM) was (52.6±12.8)°. All patients suffered from posterior cruciate ligament (PCL) injury and femoral avulsion injury of anterior cruciate ligament (ACL). Combined injuries included medial collateral ligament (MCL) injury in 4 cases (medial meniscus injury in 1 case), lateral collateral ligament (LCL) injury in 2 cases, and MCL and LCL injuries in 2 cases (medial meniscus and lateral meniscus injuries in 1 case). Autologous harmstring tendon was used to reconstruct PCL under arthroscopy combined with limited open in situ suture for repair of femoral avulsion injury of ACL, and repair of MCL, LCL, and other injury in one-stage operation. All incisions healed by first intention. Joint effusion of knee occurred in 1 case and was cured after removal of fluid combined with pressure bandage. All patients were followed up 12-36 months with an average of 22 months. At last follow-up, the result of posterior drawer test was negative in all patients. The results of Lachman test were one-degree positive in 2 cases; the result of varus stress testing was one-degree positive in 1 case; the results of valgus stress testing were one-degree positive in 2?cases; and flexion dysfunction of the knee was observed in 1 case. The Lysholm score of knee was 87.3±6.6; the IKDC score was 88.9±6.8; and the ROM was (121.7±12.3)°, all showing significant differences when compared with preoperative ones ( t =44.246, P =0.000; t =37.903, P =0.000; t =19.894, P =0.000). For KDMLI, one-stage repair and reconstruction using autologous harmstring tendon to reconst ruct PCL under arthroscopy combined with limited open in situ suture repair of femoral avulsion injury of ACL, and repair MCL, LCL, and other injury has such advantages as minimal invasiveness, reliable fixation, less complications, and fast recovery, which can significantly improve the stability, ROM, and function of knee and obtain good short-term effectiveness.

ICRS Recommendation Document

PubMed Central

Roos, Ewa M.; Engelhart, Luella; Ranstam, Jonas; Anderson, Allen F.; Irrgang, Jay J.; Marx, Robert G.; Tegner, Yelverton; Davis, Aileen M.

2011-01-01

Objective: The purpose of this article is to describe and recommend patient-reported outcome instruments for use in patients with articular cartilage lesions undergoing cartilage repair interventions. Methods: Nonsystematic literature search identifying measures addressing pain and function evaluated for validity and psychometric properties in patients with articular cartilage lesions. Results: The knee-specific instruments, titled the International Knee Documentation Committee Subjective Knee Form and the Knee injury and Osteoarthritis and Outcome Score, both fulfill the basic requirements for reliability, validity, and responsiveness in cartilage repair patients. A major difference between them is that the former results in a single score and the latter results in 5 subscores. A single score is preferred for simplicity’s sake, whereas subscores allow for evaluation of separate constructs at all levels according to the International Classification of Functioning. Conclusions: Because there is no obvious superiority of either instrument at this time, both outcome measures are recommended for use in cartilage repair. Rescaling of the Lysholm Scoring Scale has been suggested, and confirmatory longitudinal studies are needed prior to recommending this scale for use in cartilage repair. Inclusion of a generic measure is feasible in cartilage repair studies and allows analysis of health-related quality of life and health economic outcomes. The Marx or Tegner Activity Rating Scales are feasible and have been evaluated in patients with knee injuries. However, activity measures require age and sex adjustment, and data are lacking in people with cartilage repair. PMID:26069575

The importance of early diagnosis in spontaneous osteonecrosis of the knee - A case series with six year follow-up.

PubMed

Jordan, Robert W; Aparajit, Prasad; Docker, Charles; Udeshi, Umesh; El-Shazly, Mohi

2016-08-01

Spontaneous osteonecrosis of the knee has an unknown aetiology. Management options include conservative, surgical and pharmacological interventions. The aim of this study was to report the experience of the authors in conservative management of SONK using non-operative measures by analysing the functional outcome and need for surgical intervention. All patients treated for SONK between 1st August 2001 and 1st April 2014 were retrospectively reviewed. Treatment consisted of touch-down weight bearing for around six weeks. MR imaging was evaluated for size of lesion, the condyles involved and the time taken for resolution. Tegner Activity Scale, VAS pain, Lysholm, WOMAC and IKDC scores were recorded at presentation and final follow-up (mean six years, range six months to 13years). Forty cases were included; the mean age of the group was 55.3years and 67.5% were male. The medial femoral condyle was the most commonly affected (52.5%). A statistically significant improvement was reported in all functional outcome measures (p<0.001). Only one patient required arthroscopic surgical intervention and no patients required arthroplasty during the follow-up period. Early stage spontaneous osteonecrosis of the knee can be managed successfully without surgery if diagnosed early. Thus early investigation of acute knee pain with MRI scanning is recommended. Copyright © 2016 Elsevier B.V. All rights reserved.

Measuring physical activity and sports participation after autologous cartilage implantation: a systematic review.

PubMed

Santos-Magalhaes, Andre Filipe; Hambly, Karen

2014-08-01

The assessment of physical activity and return to sport and exercise activities is an important component in the overall evaluation of outcome after autologous cartilage implantation (ACI). To identify the patient-report instruments that are commonly used in the evaluation of physical activity and return to sport after ACI and provide a critical analysis of these instruments from a rehabilitative perspective. A computerized search was performed in January 2013 and repeated in March 2013. Criteria for inclusion required that studies (1) be written in English and published between 1994 and 2013; (2) be clinical studies where knee ACI cartilage repair was the primary treatment, or comparison studies between ACI and other techniques or between different ACI generations; (3) report postoperative physical activity and sport participation outcomes results, and (4) have evidence level of I-III. Twenty-six studies fulfilled the inclusion criteria. Three physical activity scales were identified: the Tegner Activity Scale, Modified Baecke Questionnaire, and Activity Rating Scale. Five knee-specific instruments were identified: the Lysholm Knee Function Scale, International Knee Documentation Committee Score Subjective Form, Knee Injury and Osteoarthritis Outcome Score, Modified Cincinnati Knee Score, and Stanmore-Bentley Functional Score. Considerable heterogeneity exists in the reporting of physical activity and sports participation after ACI. Current instruments do not fulfill the rehabilitative needs in the evaluation of physical activity and sports participation.

Osteochondral autograft transplantation for juvenile osteochondritis dissecans of the knee: a series of twelve cases.

PubMed

Sasaki, Ken; Matsumoto, Tomoyuki; Matsushita, Takehiko; Kubo, Seiji; Ishida, Kazunari; Tei, Katsumasa; Akisue, Toshihiro; Kurosaka, Masahiro; Kuroda, Ryosuke

2012-11-01

The purpose of this study was to evaluate the clinical outcomes of osteochondral autograft transplantation (OAT) for juvenile osteochondritis dissecans (JOCD) lesions of the knee, especially time to return to sports. Twelve knee JOCD lesions with OCD grade 3 and 4 categorised by magnetic resonance imaging (MRI) were treated with OAT. Nine male and two female skeletally immature patients averaging 13.7 years old were included. The OCD lesions were assessed arthroscopically and then fixed in situ using multiple osteochondral plugs harvested under fluoroscopy from the distal femoral condyle without damaging the physis. International Cartilage Repair Society (ICRS) score and Lysholm score were assessed pre- and postoperatively. After a mean follow-up of 26.2 ± 15.1 months, the International Knee Documentation Committee (IKDC) subjective score significantly improved (p < 0.01). According to the IKDC score, objective assessment showed that ten of 12 (83 %) had excellent results (score: A) after OAT and significantly improved (p < 0.01). Based on ICRS criteria, results were satisfactory in all patients. No patients experienced complications at the graft harvest site. All patients returned to their previous level of athletic activity at an average of 5.7 months after the surgery. OAT for JOCD of the knee provided satisfactory results in all patients at a mean follow-up of 26.2 months.

Drilling from the intercondylar area for treatment of osteochondritis dissecans of the knee joint.

PubMed

Kawasaki, Kenzo; Uchio, Yuji; Adachi, Nobuo; Iwasa, Junji; Ochi, Mitsuo

2003-09-01

We demonstrate a new method in which a drilling is made from the intercondylar space, and its efficacy in treating osteochondritis dissecans (OCD) of the knee in skeletally immature patients with relatively stable lesions with an intact articular surface, in cases where there was failure of initial non-operative management. The lesions of 16 knees of 12 patients with OCD of the femoral condyles failed to heal by conservative treatment for more than 3 months (average 5-6 months) and thereafter were arthroscopically treated with drilling from not the transarticular but the intercondylar bare area without damaging the articular surface. Eight lesions involved the medial femoral condyle, and eight involved the lateral femoral condyle. The average follow-up was 16 months. All lesions healed after drilling, and the average time of healing was 4 months by X-ray and 7 months by MRI. The average Lysholm score improved from an average of 70.4 points at preoperation to an average of 97.8 points after operation. The results of the Hughston Rating Scale were similar: 10 of the 12 patients showed excellent results and the remaining two patients good results. We advocate our new and less invasive procedure of drilling from the bare area of the intercondylar space for OCD in the knee joint of skeletally immature patients who have had failure of initial non-operative management.

Capsulodesis Versus Bone Trough Technique in Lateral Meniscal Allograft Transplantation: Graft Extrusion and Functional Results.

PubMed

Masferrer-Pino, Angel; Monllau, Joan C; Ibáñez, Maximiliano; Erquicia, Juan I; Pelfort, Xavier; Gelber, Pablo E

2018-06-01

To compare the radiographic results (in terms of graft extrusion) and the functional results of lateral meniscus allograft transplantations (MAT) performed with a bony fixation technique or with a soft tissue fixation technique after capsulodesis. A prospective series of 29 consecutive lateral MAT was analyzed. The inclusion criterion for MAT was lateral joint line pain due to a previous meniscectomy. Malalignment, patients who had an Ahlback grade greater than II, and patients with a body mass index over 30 were considered as the exclusion criterion to prevent confounding results. Fifteen of the grafts were fixed with a bony fixation technique (group A). The remaining 14 cases (group B) were fixed with sutures through bone tunnels after lateral capsular fixation (capsulodesis). All patients were studied with magnetic resonance imaging to determine the degree of meniscal extrusion at an average of 18 months of surgery (range, 12-48 months). Meniscal extrusion was measured on coronal magnetic resonance imaging. To standardize the results, the percentage of meniscus extruded for each group was also calculated and compared. The functional results were analyzed by means of standard knee scores (Lysholm, Tegner, and visual analog scale). If we consider the first 4 cases of group B as the learning curve of the new technique, we observe that group A had 8 cases (53.3%) of major extrusion, whereas group B had 1 case (7.1%) (P = .02). When comparing the degree of meniscal extrusion with the type of fixation employed, an even lower percentage of extruded menisci was found in group B (P = .01). The final follow-up Lysholm score in group A was 94.33 ± 5.96 (P < .001) and 91.43 ± 6.19 (P < .001) in group B. The median follow-up Tegner score significantly improved from 4 (range, 2-5) to 7 (range, 6-9) in group A (P < .001) and from 4 (range, 3-5) to 7 (range, 6-8) in group B (P < .001). The average visual analog scale score dropped down 5.87 and 7.29 points in groups A and B, respectively (P < .001). The Knee Injury and Osteoarthritis Outcome Score improved from 51.98 ± 2.84 to 90.88 ± 7.53 in group A (P < .001) and from 50.44 ± 2.32 to 92.01 ± 6.71 in group B (P < .001). Patient satisfaction with regard to the procedure stood at a mean of 3.6 ± 0.2 points out of a maximum of 4 in group A and 3.8 ± 0.4 in group B. There were no complications in this series. The capsulodesis technique in lateral MAT proved not to be statistically different at decreasing the degree of meniscal extrusion with respect to the bone-bridge fixation. If the first 4 cases using the new capsulodesis technique had not included in the results, the capsulodesis technique would have effectively presented better results relative to the degree of meniscal extrusion compared with the bone-bridge fixation technique. In addition, the functional results were similar. Level II, prospective comparative study. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Return to Play and Clinical Outcomes after All-Inside, Anterior Cruciate Ligament Reconstruction in Skeletally Immature Athletes

PubMed Central

Nawabi, Danyal H.; McCarthy, Moira; Graziano, Jessica; deMille, Polly; Chiaia, Theresa; Green, Daniel W.; Cordasco, Frank A.

2014-01-01

Objectives: Anterior cruciate ligament (ACL) injuries in skeletally immature athletes are on the rise because of increased participation and level of competition within sports, sports specialization and societal factors. Conservative treatment of these injuries has a poor natural history due to recurrent instability with meniscal and articular cartilage damage. The purpose of this study was to evaluate the results of an all-inside, physeal-sparing ACL reconstruction in skeletally immature athletes, with a focus on return to play. Methods: Forty-two skeletally immature athletes (mean chronologic age 12.7 yrs, [range 10-15]) were prospectively evaluated following an all-inside ACL reconstruction utilizing hamstring autograft. The mean bone age (Greulich and Pyle method) was 13.5 years. There were 10 females and 32 males. Twenty-six patients had an all-epiphyseal (AE) ACL reconstruction and 16 patients had a partial transphyseal (PTP) ACL reconstruction, which spared the femoral physis but crossed the tibial physis. The PTP option was reserved for patients with minimal proximal tibial growth remaining. Fourteen athletes were involved in recreational sport and 28 participated competitively. Lacrosse (36%) and Soccer (32%) were the two most common sports associated with ACL injury in our cohort. All athletes were evaluated with a physical examination, KT-1000 arthrometry, isokinetic testing, validated outcome scores including the International Knee Documentation Committee score (IKDC), the Lysholm score and Marx activity rating scale. Standing radiographs and SPGR MRI analysis was performed at 6, 12 and 24 months post-op depending upon skeletal age. A ‘Return to Play’ performance analysis was also performed where symmetry, alignment control and the ability to decelerate were assessed during progressively challenging movement patterns encountered in sport. Results: At a mean follow-up of 16.7 months (range 12-24), the mean IKDC score was 92.9 ± 7.2, the mean Lysholm score was 97.7 ± 4.6 and the mean Marx activity rating scale score was 12.4 ± 3.5. Lachman and pivot shift testing was negative in all patients. The mean side-to-side difference in the KT-1000 arthrometry was 0.9 ± 0.7 mm, with the maximum difference in the cohort being 2 mm. Isokinetic testing showed a mean deficit of 4.1% in extension torque and 9.2% in flexion torque at a repetition speed of 180 degrees per second. No angular deformities, significant leg length discrepancy or physeal disturbances were observed on postoperative radiographs or MRI. One athlete had a traumatic graft disruption at 12 months and underwent revision ACL reconstruction and one athlete sustained a contralateral ACL rupture at 11 months. The mean time for return to unrestricted competitive activity after successful completion of the ‘Return to Play’ analysis was 12.5 +/- 1.3 months from the time of surgery. Conclusion: An all-inside, physeal-sparing ACL reconstruction technique using hamstring autograft demonstrates excellent subjective and objective clinical outcomes in skeletally immature athletes without growth disturbance. ‘Return to Play’ assessment is an important tool to guide the young athlete and her or his family regarding resumption of competitive sports. In our experience, athletes were on average released for full return to sport after 1 year from ACL reconstruction.

Physeal-Specific MRI Analysis of Growth Plate Disturbance Following All-Inside Anterior Cruciate Ligament Reconstruction in Skeletally Immature Patients: Does a Physeal-Sparing Technique Offer any Advantage?

PubMed Central

Nawabi, Danyal H.; Jones, Kristofer J.; Lurie, Brett; Potter, Hollis G.; Green, Daniel W.; Cordasco, Frank A.

2013-01-01

Objectives: The decision to perform anterior cruciate ligament (ACL) reconstruction in skeletally immature patients carries a risk of growth disturbance due to iatrogenic physeal injury. Multiple physeal-sparing techniques have been described but none, to our knowledge combine the benefits of an anatomic reconstruction and socket fixation, without violation of either the femoral or tibial physis at any stage of the procedure. The purpose of this study was to compare the incidence and calculate the area of post-operative physeal disturbances, using a physeal-sensitive magnetic resonance imaging (MRI) sequence*, between all-epiphyseal (AE) and partial transphyseal (PTP) ACL reconstructions in a cohort of skeletally-immature patients. Methods: Twenty-one skeletally immature patients with a mean chronologic age of 12.7 years (range 10 to 16) undergoing all-inside ACL reconstruction were prospectively followed. Fourteen patients had an all-epiphyseal (AE) ACL reconstruction and 7 patients had a partial transphyseal (PTP) ACL reconstruction, which spared the femoral physis but crossed the tibial physis. Hamstring autograft was used in all cases. At a mean of 11.6 months follow-up, all patients were assessed for focal physeal disturbance and graft survival using a three-dimensional (3D) fat suppressed spoiled gradient-recalled echo (SPGR) MRI sequence. Angular deformity and leg length discrepancy were evaluated on full-length standing radiographs. The International Knee Documentation Committee (IKDC) subjective score and Lysholm knee score were also documented. Results: The tibial physis was violated in 13/14 patients in the AE group and all patients in the PTP group. The mean area of post-operative tibial physeal disturbance (± SD) was 42.4 ± 38.6 mm2 (mean 1.7% of total physeal area) in the AE group compared to 216.7 ± 129.1 mm2 (mean 7.3% of total physeal area) in the PTP group (p = 0.003). The femoral physis was violated in one case in both groups resulting in a mean physeal disturbance of 1.5% of the total distal femoral physeal area. No cases of fracture, articular surface violation or avascular necrosis were noted on MRI in either group. Short-term graft survival was 100% amongst the entire cohort. There were no cases of angular deformity in either group with a mean side-side difference in the lateral distal femoral angle of 1.11° ± 1.02° in the AE group and 0.72° ± 0.65° in the PTP group (p = 0.23). No significant leg-length discrepancies were measured in either group. The mean IKDC and Lysholm scores (± SD) were 93.3 ± 5.9 and 97.8 ± 3.8 respectively in the AE group and 87.7 ± 3.5 and 96 ± 5.2 respectively in the PTP group. Conclusion: All-epiphyseal ACL reconstruction caused significantly less focal physeal disturbance than PTP ACL reconstruction, as determined by a 3D physeal-sensitive MRI sequence. Neither technique however resulted in angular deformity or leg-length discrepancy at early follow-up. Both all-inside ACL reconstruction techniques used in this study are safe and effective at early follow-up in skeletally immature patients. Further longitudinal study of this cohort is required to determine any potential advantages of a purely physeal-sparing technique.

All-inside, All-epiphyseal ACL Reconstruction in Skeletally Immature Athletes: Incidence of Second Surgery and Two-year Clinical Outcomes

PubMed Central

Cordasco, Frank A.; Mayer, Stephanie W.; Graziano, Jessica; deMille, Polly; Chiaia, Theresa; McCarthy, Moira; Nawabi, Danyal H.; Green, Daniel W.

2015-01-01

Objectives: Anterior cruciate ligament (ACL) injuries in skeletally immature athletes are increasing secondary to multiple factors that include increased participation and level of competition within sports, sports specialization and societal factors. Conservative treatment of these injuries has a poor natural history due to recurrent instability with meniscal and articular cartilage damage. The purpose of this study was to evaluate the 2 year clinical outcomes of an all-inside, all-epiphyseal ACL reconstruction in skeletally immature athletes with 3-6 years of remaining growth, with a focus upon return to play and the incidence of second surgery. Methods: Twenty-three skeletally immature athletes (mean chronologic age 11.8 yrs, [range 10-13]) were prospectively evaluated following an all-inside, all-epiphyseal ACL reconstruction utilizing hamstring autograft. The mean bone age (Greulich and Pyle method) was 12.1 years. There were 6 females and 17 males. Five athletes were involved in recreational sport and 18 participated competitively. Lacrosse (40%) and Soccer (27%) were the two most common sports associated with ACL injury in our cohort. All athletes were evaluated with a physical examination, KT-1000 arthrometry, isokinetic testing, and validated outcome scores including the International Knee Documentation Committee score (IKDC), the Lysholm score and Marx activity rating scale. Standing radiographs and SPGR MRI analysis was performed at 6, 12 and 24 months post-op depending upon skeletal age. A Return to Play performance analysis was also analyzed where symmetry, alignment control and the ability to decelerate were assessed during progressively challenging movement patterns encountered in sport. Results: At a minimum follow-up of 2 years (range 2-4.5), the mean IKDC score was 94.5 ± 5.4, the mean Lysholm score was 98.1 ± 4.1 and the mean Marx activity rating scale score was 12.8 ± 3.1. Lachman and pivot shift testing was negative in all patients. The mean side-to-side difference in the KT-1000 arthrometry was 1.0 ± 0.6 mm, with the maximum difference in the cohort being 2 mm. Isokinetic testing showed a mean deficit of 4.3% in extension torque and 9.1% in flexion torque at a repetition speed of 180 degrees per second. No angular deformities, significant leg length discrepancy or physeal disturbances were observed on postoperative radiographs or MRI. Two athletes (8.6%) required a second surgery: 1 (4.3%) had a traumatic graft disruption at 10 months and underwent revision ACLR and 1 (4.3%) required meniscectomy for an incompletely healed meniscal repair at 13 months. There were no contralateral injuries in this cohort of athletes. The mean time for return to unrestricted competitive activity after successful completion of the Return to Play analysis was 12.5 +/- 1.25 months from the time of surgery. Conclusion: An all-inside, all-epiphyseal ACL reconstruction technique using hamstring autograft demonstrates excellent subjective and objective clinical outcomes in skeletally immature athletes without growth disturbance. Return to Play assessment is an important tool to guide the young athlete and his or her family regarding resumption of competitive sports. In our experience, young athletes were on average released for full return to sport after 1 year from ACL reconstruction.

Rectus femoris muscle atrophy and recovery caused by preoperative pretibial traction in femoral shaft fractures-comparison between traction period.

PubMed

Shim, D-G; Kwon, T-Y; Lee, K-B

2017-09-01

Skeletal traction is performed to temporarily stabilize fracture sites before surgery in patients with femoral fracture. To date, however, there is no study evaluating the difference in the degree of the recovery, of the muscle strength, as well as muscle atrophy following skeletal traction. The purpose of this study was to compare the degree of recovery of rectus femoris muscle strength after surgery in association with muscle atrophy by analyzing the duration of preoperative tibial traction, age and sex in patients with femoral fracture. Rectus femoris muscle atrophy will progress depending on the duration of preoperative tibial traction, age and sex in patients with femoral fracture. Thirty-one patients who underwent preoperative pretibial skeletal traction and intramedullary nailing were divided into two groups according to the traction period: group A (n=12) with a duration of traction of <7 days (mean: 4.08±1.78 days) and group B (n=19) ≥7 days (mean: 13.63±7.17 days). The degree of muscle atrophy and recovery were compared between the two groups, according to age and gender. The degree of muscle atrophy was measured by the difference in thickness of the rectus femoris between pre- and post-traction using ultrasound. The degree of muscle recovery was evaluated by the Q-setting and heel off time. Clinical outcome was evaluated by the non-union rate and Lysholm score. The degree of muscle atrophy was 0.99±0.14mm in group A and 2.22±0.11mm in group B (P<0.001). The Q-setting time was 4.83±0.94 days in group A and 6.56±1.38 days in group B (P=0.001). Heel off time was also shorter in group A at 2.58±0.90 days, taking 3.72±1.27 days in group B (P=0.012). The recovery rate in the rectus femoris was significantly higher in group A than in group B (P<0.001). There was no significant difference in non-union rate between group A and B (P=0.672) but the mean Lysholm score at the last follow-up was significantly higher in group A than in group B (P=0.006). However, no significant differences were detected in the mean thickness of the rectus femoris, Q-setting, and heel off time between the different age and gender groups (P<0.05). The prolonged duration of preoperative skeletal traction indicates not only that the resulting disuse atrophy would progress further but also that the muscle atrophy would be accelerated more rapidly for shorter periods of time, based on a cut-off value of 7 days. In addition, the rate of rectus femoris muscle recovery and clinical outcomes were lower in patients undergoing traction for longer periods of time. This indicates that it would be effective for increasing the rate of the recovery and minimizing the occurrence of post surgical complications if surgeons could perform surgery at the earliest possible opportunity following traction, within seven days after the onset of trauma. IV, retrospective cohort study. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Bioabsorbable versus metallic interference screws for graft fixation in anterior cruciate ligament reconstruction.

PubMed

Debieux, Pedro; Franciozi, Carlos E S; Lenza, Mário; Tamaoki, Marcel Jun; Magnussen, Robert A; Faloppa, Flávio; Belloti, João Carlos

2016-07-24

Anterior cruciate ligament (ACL) tears are frequently treated with surgical reconstruction with grafts, frequently patella tendon or hamstrings. Interference screws are often used to secure the graft in bone tunnels in the femur and tibia. This review examines whether bioabsorbable interference screws give better results than metal interference screws when used for graft fixation in ACL reconstruction. To assess the effects (benefits and harms) of bioabsorbable versus metallic interference screws for graft fixation in ACL reconstruction. We searched the Cochrane Bone, Joint and Muscle Trauma Group Specialised Register, CENTRAL (the Cochrane Library), MEDLINE, Embase, LILACS, trial registers and reference lists of articles. Date of search: January 2016. We included randomised controlled trials and quasi-randomised trials comparing bioabsorbable with metallic interferences screws in ACL reconstruction. The main outcomes sought were subjective-rated knee function, failure of treatment, and activity level. At least two review authors selected eligible trials, independently assessed risk of bias, and cross-checked data. Data were pooled whenever relevant and possible. Requests for further information were sent to the original study authors. We included 12 trials (11 randomised and one quasi-randomised) involving a total of 944 participants, and reporting follow-up results for 774. Participants in the 12 trials underwent ACL reconstruction with either hamstring tendon grafts (five trials) or patellar tendon grafts (seven trials). Trials participants were randomly allocated to bioabsorbable or metallic interference screws for graft fixation in both femur and tibia (seven trials); femur only (three trials); tibia only (one trial); location was not reported in the remaining trial. A variety of materials was used for the bioabsorbable screws, Poly-L-lactic acid (PLLA) being the most common. The metallic screws, where reported, were titanium.All trials were at high risk of bias, which invariably included performance bias. Seven trials were at high risk of attrition bias and eight at high risk of reporting bias. The quasi-randomised trial was assessed as being at high risk for selection bias. Based on these study limitations and insufficiency of the available data, we judged the quality of evidence for all outcomes was very low.The majority of the available data for patient-reported knee function was presented as Lysholm scores (0 to 100; higher scores = better function). There was very low quality but consistent evidence of no clinically important differences between the two groups in Lysholm scores at 12 months follow-up (mean difference (MD) -0.08, 95% confidence interval (CI) -1.48 to 1.32; three trials, 168 participants); 24 months (MD 0.35, 95% CI -1.27 to 1.98; three trials, 113 participants) or five or more years follow-up (MD 1.23, 95% CI -2.00 to 4.47; two trials, 71 participants). This lack of between-group differences was also reported for Lysholm scores in several trials that did not provide sufficient data for pooling as well as for other self-reported knee function scores reported in several trials.Treatment failure was represented by the summed data for implant breakage during surgery and major postoperative complications (implant failure, graft rupture, symptomatic foreign body reactions, effusion and treated arthrofibrosis and related conditions) that were usually described in the trial reports as requiring further substantive treatment. There is very low-quality evidence of greater treatment failure in the bioabsorbable screw group (60/451 versus 29/434; risk ratio (RR) 1.94 favouring metallic screw fixation, 95% CI 1.29 to 2.93; 885 participants, 11 studies). In a population with an assumed risk (based on the median control group risk) of 56 participants per 1000 having treatment failure after metallic screw fixation, this equates to 53 more (95% CI 17 to 108 more) per 1000 participants having treatment failure after bioabsorbable screw fixation. All 16 intraoperative complications in the bioabsorbable screw group were implant breakages upon screw insertion. Treatment failure defined as postoperative complications only still favoured the metallic screw group but the 95% CI also included the potential for a greater risk of treatment failure after metallic screw fixation: 44/451 versus 29/434; RR 1.44, 95% CI 0.93 to 2.23. Based on the assumed risk of 56 participants per 1000 having postoperative treatment failure after metallic screw fixation, this equates to 25 more (95% CI 4 fewer and 69 more) per 1000 participants having this outcome after bioabsorbable screw fixation.There was very low-quality evidence of very similar activity levels in the two groups at 12 and 24 months follow-up measured via the Tegner score (0 to 10; higher scores = greater activity): 12 months (MD 0.08, 95% CI -0.39 to 0.55; 122 participants, two studies); 24 months (MD 0.01, 95% CI -0.54 to 0.57; 72 participants, two studies). There is very low-quality evidence of no difference in self-reported knee function and levels of activity between bioabsorbable and metallic interference screws for graft fixation in ACL reconstruction. There is very low-quality evidence that bioabsorbable screws may be associated with more overall treatment failures, including implant breakage during surgery. Further research does not appear to be a priority, but if undertaken, should also examine costs.

Treatment of patella baja by a modified Z-plasty.

PubMed

Guido, Wierer; Christian, Hoser; Elmar, Herbst; Elisabeth, Abermann; Christian, Fink

2016-09-01

The purpose of this study was to evaluate the efficiency of a modified Z-plasty for patellar tendon lengthening for the treatment of patella baja. Rather than adapting only two tendon reins according to the conventional Z-plasty method, the modified Z-plasty provides four reins to enable multifold overlapping of the tendon tissue. Between 2010 and 2012, a modified Z-plasty procedure was performed in four patients suffering from patella baja. Physical examinations and standardized scoring instruments served as the evaluation measures. The median preoperative CD ratio of 0.53 (range 0.43-0.62) was corrected to 1.03 (range 1-1.06) after a median follow-up of 34 months (range 23-41 months). The median preoperative flexion of 108° (range 80-135°) improved to 143° (range 110-145°) compared with the flexion of 145° (range 140-145°) of the unaffected knee. No patients showed any signs of extension lag. The median Lysholm score improved from 49 (range 22-80) to 91 (range 67-95), and the Tegner activity level improved from 2 (range 0-6) to 6 (range 2-6). The median VAS status for pain decreased from an average of 8.5 (range 4-10) to 1 (range 0-2). No complications were observed. The modified Z-plasty procedure is a valuable technique for the treatment of patella baja, especially if allografts are not available. This procedure allowed for early mobilization and achieved excellent clinical results. IV.

No degeneration found in focal cartilage defects evaluated with dGEMRIC at 12-year follow-up.

PubMed

Engen, Cathrine Nørstad; Løken, Sverre; Årøen, Asbjørn; Ho, Charles; Engebretsen, Lars

2017-02-01

Background and purpose - The natural history of focal cartilage defects (FCDs) is still unresolved, as is the long-term cartilage quality after cartilage surgery. It has been suggested that delayed gadolinium-enhanced magnetic resonance imaging of cartilage (dGEMRIC) is a biomarker of early OA. We aimed to quantitatively evaluate the articular cartilage in knees with FCDs, 12 years after arthroscopic diagnosis. Patients and methods - We included 21 patients from a cohort of patients with knee pain who underwent arthroscopy in 1999. Patients with a full-thickness cartilage defect, stable knees, and at least 50% of both their menisci intact at baseline were eligible. 10 patients had cartilage repair performed at baseline (microfracture or autologous chondrocyte implantation), whereas 11 patients had either no additional surgery or simple debridement performed. Mean follow-up time was 12 (10-13) years. The morphology and biochemical features were evaluated with dGEMRIC and T2 mapping. Standing radiographs for Kellgren and Lawrence (K&L) classification of osteoarthritis (OA) were obtained. Knee function was assessed with VAS, Tegner, Lysholm, and KOOS. Results - The dGEMRIC showed varying results but, overall, no increased degeneration of the injured knees. Degenerative changes (K&L above 0) were, however, evident in 13 of the 21 knees. Interpretation - The natural history of untreated FCDs shows large dGEMRIC variations, as does the knee articular cartilage of surgically treated patients. In this study, radiographic OA changes did not correlate with cartilage quality, as assessed with dGEMRIC.

Infra Patellar Branch of Saphenous Nerve Injury during Hamstring Graft Harvest: Vertical versus Oblique Incisions.

PubMed

Joshi, A; Kayasth, N; Shrestha, S; Kc, B R

2016-09-01

Autologous hamstring grafts are commonly used for anterior cruciate ligament reconstruction. The injury of infrapatellar branch of saphenous nerve is one of the concerns leading to various pattern of sensory loss in the operated leg. An oblique incision to harvest the graft has been reported to be better than the vertical one.The aim of this study was to compare the incidence, recovery of nerve injury and final outcome in patients with hamstring harvest of vertical or oblique incision. A total of 146 patients who underwent hamstring graft harvest for anterior cruciate ligament reconstruction, were included in the study. They were randomized into two (Vertical and Oblique) groups as per the incisions used. The sensory loss along the Infra Patellar Branch of Saphenous Nerve was documented on 3rd day. Recovery of the nerve injury was monitoredat three, six and 12 months follow-ups. At final follow up Tegner Lysholm score and scale was recorded to compare between two groups. The incidence of infrapatellar branch of saphenous nerve injury was 25% in vertical group and 16.36% in oblique group. Recovery of nerve injury started earlier in oblique group compared to vertical group. The mean TegnerLyshom score was not significantly different in both the groups. Oblique incision to harvest hamstring graft has lesser incidence of infrapatellar branch of saphenous nerve injury, recovers earlier and does not have any adverse effect on final outcome compared to the vertical incision.

Treatment of patella fracture by claw-like shape memory alloy.

PubMed

Hao, Wei; Zhou, Lugang; Sun, Yujie; Shi, Peng; Liu, Hongzhi; Wang, Xin

2015-07-01

Titanium-nickel shape memory alloy (Ti-Ni SMA) is characterized by shape-memory effect, super-elasticity, excellent fatigue behavior, corrosion resistance, acceptable biocompatibility and high damping capacity. Claw-like Ti-Ni SMA fixator (SMA-claw) has been used to treat transverse fracture of patella. 29 patients (19 males, 10 females) aged from 21 to 71 years old (averaged 43.0 years old) have been received open reduction and internal fixation with SMA-claw from January 2011 to December 2011. After operation, patients have been received gradual knee function exercises, followed by radiographic analysis and Lysholm Knee Score at 1, 2, 3, 6, 9 and 12 months postoperation. The mean follow-up time was 11.48 months (25 patients finished, 1 lost after 6 months and 3 lost after 9 months). Radiographic bone union occurred at 2 months (7 patients) or 3 months (22 patients). Satisfied range of motion for the knee joint has been observed with 1.90/141.72° (hyperextension/flexion) at 3 months, 4.83/143.97° at 6 months, 4.82/144.82° at 9 months and 5.2/145° at 12 months postsurgery. The Ti-Ni SMA-claw fixator produced good osteosynthesis effect by continuous recovery stress with relatively simple and minimally invasive handling process, which can be introduced as an alternative to traditional tension band technique for treatment of patellar transverse fracture.

Double-bundle PCL reconstruction using autologous hamstring tendons: outcome with a minimum 2-year follow-up.

PubMed

Cury, Ricardo de Paula Leite; Castro Filho, Rômulo Neves; Sadatsune, Daniel Akira; do Prado, Davi Ribeiro; Gonçalves, Ricardo José Peruzzo; Mestriner, Marcos Barbieri

2017-01-01

To present the outcomes of posterior cruciate ligament (PCL) double-bundle reconstruction using autologous hamstring tendons, with a minimum follow-up of two years. Evaluation of 16 cases of PCL injury that underwent double-bundle reconstruction with autogenous hamstring tendons, between 2011 and 2013. The final sample consisted of 16 patients, 15 men and one woman, with a mean age of 31 years (21-49). The predominant mechanism was motorcycle accident in half of the cases. There was a mean interval of 15 months between the time of lesion and the surgery (three to 52 months). Five lesions were isolated and 11, associated. Clinical evaluation, application of validated scores, and measurements with use of the KT-1000 were performed. The analysis showed a mean preoperative Lysholm score of 50 points (28-87), progressing to 94 points (85-100) postoperatively. The IKDC score also demonstrated improvement. In the preoperative evaluation, four and 12 patients were respectively classified as C (abnormal) and D (very unusual), and in the postoperative evaluation six as A (normal) and ten as B (close to normal). In the post-operative evaluation by KT1000 arthrometer, 13 patients showed difference between 0-2 mm and 3 between 3 and 5 mm, when compared with the contralateral side. Autologous hamstring tendons are a viable option in double-bundle reconstruction of the PCL, with good clinical results in a minimum follow-up of two years.

Platelet-rich plasma: does it help reduce tunnel widening after ACL reconstruction?

PubMed

Vadalà, Antonio; Iorio, Raffaele; De Carli, Angelo; Ferretti, Matteo; Paravani, Daniele; Caperna, Ludovico; Iorio, Carlo; Gatti, Andrea; Ferretti, Andrea

2013-04-01

The purpose of this study was to evaluate the efficacy of platelet-rich plasma (PRP) in reducing femoral and tibial tunnel enlargement in patients operated on for anterior cruciate ligament reconstruction with hamstrings. Forty male patients, in which both femoral and tibial 9-mm tunnels were performed because of the graft size, were enrolled in this prospective study. They were randomly assigned to group A (20 patients, PRP group) and group B (20 patients, control group). All patients were followed up at a median of 14.7 months (range 10-16 months), with a physical examination, the Tegner, Lysholm and objective IKDC scoring scales, and with the KT-1000 arthrometer. Moreover, they underwent a CT evaluation in order to assess the amount of tunnel enlargement. Femoral tunnel diameter increased from 9.0 ± 0.1 mm to 9.8 ± 0.3 mm in group A (p = 0.032) and from 9.0 ± 0.1 mm to 9.4 ± 0.5 mm in group B (p = 0.043). Tibial tunnel diameter increased from 9.0 ± 0.2 mm to 10.9 ± 0.2 mm in group A (p = 0.029) and from 9.1 ± 0.1 mm to 10.1 ± 0.4 mm in group B (p = 0.028). Physical examination as well as the evaluation scales used showed no differences between the two groups. The use of PRP does not seem to be effective in preventing tunnel enlargement.

Changes in the T2 value of cartilage after meniscus transplantation over 1 year.

PubMed

Park, Sun-Young; Lee, Sang Hoon; Lee, Min Hee; Chung, Hye Won; Shin, Myung Jin

2017-04-01

To evaluate the changes in the mean T2 values of articular cartilage on serial follow-up images up to 1 year in patients who underwent lateral meniscus allograft transplantation (MAT). Fifty-two patients who underwent lateral MAT surgery at our hospital were evaluated preoperatively and at 2 days, 6 weeks, 3 months, 6 months, and 1 year after MAT using 3.0-T magnetic resonance imaging (MRI) that included T2 mapping. T2 value changes according to the arthroscopic grading of chondromalacia were evaluated in the lateral and medial compartment. Lysholm scores were obtained pre- and postoperatively. The T2 values of cartilage were significantly increased 2 days after operation, and then gradually reduced to the baseline level after 1 year in both compartments. In morphologic assessment performed after 1 year, most areas (92.9 %) showed no interval change of chondromalacia grade. Lyshom knee scores increased significantly from the mean preoperative value of 62.5 (range, 23-95) to 89.7 (range, 64-100) at 1 year (p < 0.001). Mean T2 values of cartilage following MAT exhibited a return to baseline level after 1 year. T2 measurement can be a useful tool for quantitative evaluation of postoperative cartilage changes compared to conventional MRI. • T2 mapping provides objective data for longitudinal monitoring following surgery. • Increased cartilage T2 values post-MAT returned to baseline in one year. • Further studies are required to predict the chondroprotective effect of MAT.

Pilot Study of Cartilage Repair in the Knee Joint with Multiply Incised Chondral Allograft

PubMed Central

Vancsodi, Jozsef; Farkas, Boglarka; Fazekas, Adam; Nagy, Szilvia Anett; Bogner, Peter; Vermes, Csaba; Than, Peter

2015-01-01

Background Focal cartilage lesions in the knee joint have limited capacity to heal. Current animal experiments show that incisions of the deep zone of a cartilage allograft allow acceptable integration for the graft. Questions/Purposes We performed this clinical study to determine (1) if the multiply incised cartilage graft is surgically applicable for focal cartilage lesions, (2) whether this allograft has a potential to integrate to the repair site, and (3) if patients show clinical improvement. Patients and Methods Seven patients with 8 chondral lesions were enrolled into the study. Symptomatic lesions between 2 and 8 cm2 were accepted. Additional injuries were allowed but were addressed simultaneously. Grafts were tailored to match and the deep zone of the cartilage was multiply incised to augment the basal integration before securing in place. Rigorous postoperative physiotherapy followed. At 12 and 24 months the patients’ satisfaction were measured and serial magnetic resonance imaging (MRI) was performed in 6 patients. Results Following the implantations no adverse reaction occurred. MRI evaluation postoperatively showed the graft in place in 5 out of 6 patients. In 1 patient, MRI suggested partial delamination at 1 year and graft degeneration at 2 years. Short Form–36 health survey and the Lysholm knee score demonstrated a significant improvement in the first year; however, by 2 years there was a noticeable drop in the scores. Conclusions. Multiply incised pure chondral allograft used for cartilage repair appears to be a relatively safe method. Further studies are necessary to assess its potential in cartilage repair before its clinical use. PMID:26069710

Single-stage cartilage repair in the knee with microfracture covered with a resorbable polymer-based matrix and autologous bone marrow concentrate.

PubMed

Enea, D; Cecconi, S; Calcagno, S; Busilacchi, A; Manzotti, S; Kaps, C; Gigante, A

2013-12-01

Different single-stage surgical approaches are currently under evaluation to repair focal cartilage lesions. This study aims to analyze the clinical and histological results after treatment of focal condylar articular lesions of the knee with microfracture and subsequent covering with a resorbable polyglycolic acid/hyaluronan (PGA -HA) matrix augmented with autologous bone marrow concentrate (BMC). Nine patients with focal lesions of the condylar articular cartilage were consecutively treated with arthroscopic PGA -HA-covered microfracture and bone marrow concentrate (PGA -HA-CMBMC). Patients were retrospectively assessed using standardized assessment tools and magnetic resonance imaging (MRI). Five patients consented to undergo second look arthroscopy and 2 consented biopsy harvest. All the patients but one showed improvement in clinical scoring from the pre-operative situation to the latest follow-up (average 22±2months). The mean IKDC subjective score, Lysholm score, VAS and the median Tegner score significantly increased from baseline to the latest follow-up. Cartilage macroscopic assessment at 12months revealed that one repair appeared normal, three almost normal and one appeared abnormal. Histological analysis proofed hyaline-like cartilage repair tissue formation in one case. MRI at 8 to 12months follow-up showed complete defect filling. The first clinical experience with single-stage treatment of focal cartilage defects of the knee with microfracture and covering with the PGA -HA matrix augmented with autologous BMC (PGA -HA-CMBMC) suggests that it is safe, it improves knee function and has the potential to regenerate hyaline-like cartilage. IV, case series. Copyright © 2013 Elsevier B.V. All rights reserved.

Testing the feasibility and safety of the Nintendo Wii gaming console in orthopedic rehabilitation: a pilot randomized controlled study

PubMed Central

Stapf, Jonas; Meissner, Kay Michael; Niethammer, Thomas; Lahner, Matthias; Wagenhäuser, Markus; Müller, Peter E.; Pietschmann, Matthias F.

2016-01-01

Introduction The Nintendo Wii game console is already used as an additional training device for e.g. neurological wards. Still there are limited data available regarding orthopedic rehabilitation. The authors’ objective was to examine whether the Nintendo Wii is an appropriate and safe tool in rehabilitation after orthopedic knee surgery. Material and methods A prospective, randomized, controlled study comparing standard physiotherapy vs. standard physiotherapy plus game console training (Wii group) in patients having anterior cruciate ligament (ACL) repair or knee arthroplasty was conducted. The subjects of the Wii group (n = 17; mean age: 54 ±19 years) performed simple knee exercises daily under the supervision of a physiotherapist in addition to the normal rehabilitation program. The patients of the control group (n = 13; 52 ±18 years) were treated with physiotherapy only. The participants of both groups completed a questionnaire including the International Knee Documentation Committee (IKDC) score, the Modified Cincinnati Rating System and the Tegner Lysholm Knee Score prior to the operation, before discharge from hospital and four weeks after treatment. Results There was no significant difference in the score results between the Wii and the control group (p > 0.05). Conclusions We demonstrated that physiotherapy using the Nintendo Wii gaming console after ACL reconstruction and knee arthroplasty does not negatively influence outcome. Because training with the Wii device was highly accepted by patients, we see an opportunity whereby additional training with a gaming console for a longer period of time could lead to even better results, regarding the training motivation and the outcome after orthopedic surgery. PMID:27904518

Unsatisfactory Outcome of Arthrodesis Performed After Septic Failure of Revision Total Knee Arthroplasty

PubMed Central

Röhner, Eric; Windisch, Christoph; Nuetzmann, Katy; Rau, Max; Arnhold, Michael; Matziolis, Georg

2015-01-01

Background: Periprosthetic infection is one of the most dreaded orthopaedic complications. Current treatment procedures include one-stage or two-stage revision total knee arthroplasty. If the periprosthetic infection is no longer controllable after several revision total knee arthroplasties, many surgeons regard knee arthrodesis as a promising option. The aim of our study was to ascertain whether intramedullary nailing results in the suppression or eradication of an infection and to identify risk factors for persistent infection. Methods: All patients who had undergone intramedullary nailing following septic failure of revision total knee arthroplasty between 1997 and 2013 were included in the study. Pathogens, risk factors predisposing to persistent infection, and the rate of persistent infections were recorded. In addition, a visual analog scale (VAS) and Knee injury Osteoarthritis Outcome Score (KOOS), Knee Society Score (KSS), Lysholm, Short Form-36 (SF-36), and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) questionnaires were completed to assess clinical outcomes and quality of life. Results: Twenty-six patients were included in the study. Thirteen (50%) had a persistent infection requiring additional revision surgery. Nineteen patients (73%) reported persistent pain (VAS score of >3). All scores showed marked impairment of quality of life. Conclusions: Intramedullary nailing following septic failure of revision total knee arthroplasty must be regarded with skepticism, and we cannot recommend it. Repeat revision total knee arthroplasty or amputation should be considered as an alternative in such difficult cases. Level of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence. PMID:25695981

Clinical study on the arthroscopic refreshing treatment of anterior cruciate ligament injury combined with stable medial meniscus ramp injury

PubMed Central

Yang, J.; Guan, K.; Wang, J.Z.

2017-01-01

This study sought to investigate the clinical efficacy of arthroscopic refreshing treatment of anterior cruciate ligament (ACL) injury combined with stable medial meniscus ramp injury. Sixty-eight patients treated between January 2010 and January 2014 were included, and their clinical data were retrospectively analyzed. All patients, after being treated using ACL reconstruction, were divided into 2 groups according to meniscus injury treatment method. The observation group (31 cases) was treated by arthroscopic refreshing, which removed the tissue on both sides of the tear edge using a cutting knife, while the control group (37 cases) was treated using Fast-fix sutures. All patients were followed up for at least 24 months. Surgical duration, postoperative function recovery time, and hospital stay for patients in the observation group were significantly shorter than for those of the control group (P<0.05). Both groups showed significant post-operative improvement for Lysholm scores, IKDC scores, and average knee range of motion at 12 and 24 months post-operation (P<0.05), but no significant differences between groups were observed (P>0.05). Regarding the difference in movement range between the healthy and injured sides, both groups showed significant decrease post-operation (P<0.05). Ultimately, there was no significant difference in the recovery of ramp damage and objective symptoms between the two groups (P>0.05). Arthroscopic refreshing treatment of patients with anterior cruciate ligament injury combined with stable ramp lesion can achieve similar clinical curative effects as the Fast-fix suture, thereby providing a simple alternative for patient treatment worth popularizing. PMID:28574418

Evaluation of outcome measures for use in clinical practice for adults with musculoskeletal conditions of the knee: a systematic review.

PubMed

Howe, Tracey E; Dawson, Lesley J; Syme, Grant; Duncan, Louise; Reid, Judith

2012-04-01

This systematic review reported on the clinimetric properties of outcome measures for use in clinical practice for adults with musculoskeletal conditions of the knee. A systematic search was performed in Medline, EMBASE, Cinahl and AMED to identify studies examining the clinimetric properties of outcome measures for adults undergoing conservative treatment of ligament injuries, meniscal lesions, patellofemoral pain and osteoarthritis of the knee. Outcomes measures taking less than 20 min to administer and requiring minimal equipment and space were included. Pairs of authors used a checklist to record the characteristics of the outcome measures, their reported clinimetric properties and the demographics of the study populations. The OMERACT filters of 'truth' and 'discrimination' were applied to the data for each outcome measure by an expert panel. Forty-seven studies were included evaluating 37 outcome measures. Ten outcome measures had adequate supporting evidence for 'truth' and 'discrimination': AAOS, AKPS, goniometer measurement, IKDC, KOOS, LEFS, Lysholm, Tegner, WOMAC and WOMET. However none of the outcome measures had been comprehensively tested across all clinimetric properties. Despite the widespread use of some outcome measures in clinical practice and primary research, data on the clinimetric properties were available for only 37 and of these only 10 had adequate supporting evidence for use in this population. However, before a core set of outcome measures can be recommended use in clinical practice, for adults with musculoskeletal conditions of the knee, consensus should be obtained on 'feasibility' in terms of burden on the clinician and the participant. Copyright © 2011 Elsevier Ltd. All rights reserved.

Results of arthroscopic treatment in unresolved Osgood-Schlatter disease in athletes.

PubMed

Circi, Esra; Beyzadeoglu, Tahsin

2017-02-01

In this study we aimed to determine outcomes following arthroscopic ossicle excision in athletes with unresolved Osgood-Schlatter disease (OSD). Arthroscopy was performed on 11 patients (11 knees) with OSD between September 2008 and November 2014. Surgical treatment inclusion criteria were determined as: failure of conservative treatment; isolated pain over the tibial tubercle and distal patellar tendon; pain limiting sporting performance at a competitive level. All patients had a documented history of OSD; the mean duration of persistent pain over the tibial tubercle was 15.5 months. The mean age was 23 years. The mean follow-up period was 66.1 months. The mean latency in returning to sports related training activities after the surgery was 6.7 weeks. The mean Kujala patello-femoral score improved from 82.9 points pre-operatively, to 98.5 points at the final follow-up (p < 0.01). The mean Lysholm knee scale score was 87.5 points in the pre-operative period, increasing to a score of 96.9 points at final follow-up (p < 0.01). The mean Tegner activity level score was 7.5 in the pre-operative period, increasing to 8.5 post-operatively (p < 0.01). We investigated the functional outcomes after arthroscopic treatment of unresolved OSD in athletes. All athletes with OSD showed satisfactory functional recovery following arthroscopic treatment. All patients were able to return to the same level of athletic activity. Arthroscopic surgery for unresolved OSD has the major advantage of faster recovery and avoiding damage to the patellar tendon.

High Variability in Outcome Reporting Patterns in High-Impact ACL Literature.

PubMed

Makhni, Eric C; Padaki, Ajay S; Petridis, Petros D; Steinhaus, Michael E; Ahmad, Christopher S; Cole, Brian J; Bach, Bernard R

2015-09-16

ACL (anterior cruciate ligament) reconstruction is one of the most commonly performed and studied procedures in modern sports medicine. A multitude of objective and subjective patient outcome measures exists; however, nonstandardized reporting patterns of these metrics may create challenges in objectively analyzing pooled results from different studies. The goal of this study was to document the variability in outcome reporting patterns in high-impact orthopaedic studies of ACL reconstruction. All clinical studies pertaining to ACL reconstruction in four high-impact-factor orthopaedic journals over a five-year period were reviewed. Biomechanical, basic science, and imaging studies were excluded, as were studies with fewer than fifty patients, yielding 119 studies for review. Incorporation of various objective and subjective outcomes was noted for each study. Substantial variability in reporting of both objective and subjective measures was noted in the study cohort. Although a majority of studies reported instrumented laxity findings, there was substantial variability in the type and method of laxity reporting. Most other objective outcomes, including range of motion, strength, and complications, were reported in <50% of all studies. Return to pre-injury level of activity was infrequently reported (24% of studies), as were patient satisfaction and pain assessment following surgery (8% and 13%, respectively). Of the patient-reported outcomes, the International Knee Documentation Committee (IKDC), Lysholm, and Tegner scores were most often reported (71%, 63%, and 42%, respectively). Substantial variability in outcome reporting patterns exists among high-impact studies of ACL reconstruction. Such variability may create challenges in interpreting results and pooling them across different studies. Copyright © 2015 by The Journal of Bone and Joint Surgery, Incorporated.

Testing the feasibility and safety of the Nintendo Wii gaming console in orthopedic rehabilitation: a pilot randomized controlled study.

PubMed

Ficklscherer, Andreas; Stapf, Jonas; Meissner, Kay Michael; Niethammer, Thomas; Lahner, Matthias; Wagenhäuser, Markus; Müller, Peter E; Pietschmann, Matthias F

2016-12-01

The Nintendo Wii game console is already used as an additional training device for e.g. neurological wards. Still there are limited data available regarding orthopedic rehabilitation. The authors' objective was to examine whether the Nintendo Wii is an appropriate and safe tool in rehabilitation after orthopedic knee surgery. A prospective, randomized, controlled study comparing standard physiotherapy vs. standard physiotherapy plus game console training (Wii group) in patients having anterior cruciate ligament (ACL) repair or knee arthroplasty was conducted. The subjects of the Wii group ( n = 17; mean age: 54 ±19 years) performed simple knee exercises daily under the supervision of a physiotherapist in addition to the normal rehabilitation program. The patients of the control group ( n = 13; 52 ±18 years) were treated with physiotherapy only. The participants of both groups completed a questionnaire including the International Knee Documentation Committee (IKDC) score, the Modified Cincinnati Rating System and the Tegner Lysholm Knee Score prior to the operation, before discharge from hospital and four weeks after treatment. There was no significant difference in the score results between the Wii and the control group ( p > 0.05). We demonstrated that physiotherapy using the Nintendo Wii gaming console after ACL reconstruction and knee arthroplasty does not negatively influence outcome. Because training with the Wii device was highly accepted by patients, we see an opportunity whereby additional training with a gaming console for a longer period of time could lead to even better results, regarding the training motivation and the outcome after orthopedic surgery.

Interlocking Intramedullary Nailing Versus Locked Dual-Plating Fixation for Femoral Shaft Fractures in Patients with Multiple Injuries: A Retrospective Comparative Study.

PubMed

Cheng, Tao; Xia, Rong-Gang; Dong, Shi-Kui; Yan, Xiao-Yu; Luo, Cong-Feng

2017-12-18

Intramedullary nailing (IMN) is a popular method in the management of femoral shaft fractures (FSFs). However, whether the association of IMN with pulmonary fat emboli can compromise the pulmonary and nervous systems is debatable. The purpose of this study is to compare IMN with the locked dual plating (LDP) method by assessing the clinical outcomes of FSF patients with head or chest injury. A total of 126 FSF patients were included in this study between January 2010 and July 2016 and divided into LDP and IMN groups. Patient demographic characteristics, operative time, blood loss, Harris Hip Score, Lysholm Knee Score, radiological outcomes, and systemic complications were collected and compared between the two treatment groups. Patients were followed up for at least 12 months. The LDP group performed better than IMN in terms of operative time, estimated blood loss amount, and malunion rate. Differences in function scores, fracture union rate, overall pulmonary complication rate, and in-hospital mortality between the two groups were not significant. Average radiographic union time was significantly longer in the LDP group (36.3 weeks) than in the IMN group (32.5 weeks). One case of fixation failure occurred postoperatively in the LDP group, whereas one case of fracture nonunion took place in the IMN group. Our findings suggest that dual-plating fixation is a promising method for FSFs with multiple injuries. However, the retrospective nature of this study necessitates high-quality trials to be performed to assess the clinical efficiency of dual plating.

Evaluation and comparison of clinical results of femoral fixation devices in arthroscopic anterior cruciate ligament reconstruction.

PubMed

Aydin, Deniz; Ozcan, Mert

2016-03-01

Several femoral fixation devices are available for hamstring tendon autograft in anterior cruciate ligament (ACL) reconstruction, but the best technique is debatable. We hypothesised that different suspensory femoral fixation techniques have no superiority over each other. The aim of this study was to evaluate and compare the clinical results of different suspensory femoral fixation devices in arthroscopic ACL reconstruction. This was a Level III, retrospective, comparative study. A total of 100 consecutive patients who underwent arthroscopic ACL reconstruction in a single institution with a mean follow-up time of 40 months (12-67 months) were divided into three groups according to femoral fixation devices as 'Endobutton' (n=34), 'Transfix' (n=35) and 'Aperfix' (n=31). The length of painful period after surgery, time to return to work and sporting activities, final range of motion, anterior drawer and Lachman tests, knee instability symptoms, International Knee Documentation Committee (IKDC) subjective knee evaluation score, Short Form 36 (SF-36) score, Lysholm knee score and Tegner point of the patients were evaluated and compared between groups. There were no significant differences between the groups. All techniques led to significant recovery in knee instability tests and symptoms. In this study, the clinical results of different suspensory femoral fixation techniques were found to be similar. We believe that different femoral fixation techniques have no effect on clinical results provided that the technique is correctly applied. The surgeon must choose a technique appropriate to his or her experience. Copyright © 2015 Elsevier B.V. All rights reserved.

INFLUENCE OF DIFFERENT LEVELS OF SPORTS ACTIVITIES ON THE QUALITY OF LIFE AFTER THE RECONSTRUCTION OF ANTERIOR CRUCIATE LIGAMENT.

PubMed

Ninković, Srđan; Avramov, Snežana; Harhaji, Vladimir; Obradović, Mirko; Vranješ, Miodrag; Milankov, Miroslav

2015-01-01

The goal of this study was to examine the nature and presence of influence of different levels of sports activity on the life quality of the patients a year after the reconstruction of anterior cruciate ligament. The study included 185 patients operated at the Department of Orthopedic Surgery and Traumatology of the Clinical Centre of Vojvodina, who were followed for twelve months. Data were collected using the modified Knee Injury and Osteoarthritis Outcome Score questionnaire which included the Lysholm scale. This study included 146 male and 39 female subjects. The reconstruction of anterior cruciate ligament was equally successful in both gender groups. In relation to different types of sports activity, there were no differences in the overall life quality measured by the questionnaire and its subscales, regardless of the level (professional or recreational). However, regarding the level of sports activities, there were differences among the subjects engaged in sports activities at the national level as compared with those going in for sports activities at the recreational level, and particularly in comparison with physically inactive population. A significant correlation was not found by examining the aforementioned relationship between sports activities. This study has shown that the overall life quality a year after the reconstruction of the anterior cruciate ligament does not differ in relation to either the gender of the subjects or the type of sports activity, while the level of sports activity does have some influence on the quality of life. Professional athletes have proved to train significantly more intensively after this reconstruction than those going in for sports recreationally.

Test and demonstration of a 1-MW wellhead generator: helical screw expander power plant, Model 76-1. Final report to the International Energy Agency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-07-04

A 1-MW geothermal wellhead power plant incorporating a Lysholm or helical screw expander (HSE) was field tested between 1980 and 1983 by Mexico, Italy, and New Zealand with technical assistance from the United States. The objectives were to provide data on the reliability and performance of the HSE and to assess the costs and benefits of its use. The range of conditions under which the HSE was tested included loads up to 933 kW, mass flowrates of 14,600 to 395, 000 lbs/hr, inlet pressures of 64 to 220 psia, inlet qualities of 0 to 100%, exhaust pressures of 3.1 tomore » 40 psia, total dissolved solids up to 310,000 ppM, and noncondensible gases up to 38% of the vapor mass flow. Typical machine efficiencies of 40 to 50% were calculated. For most operations efficiency increased approximately logarithmically with shaft power, while inlet quality and rotor speed had only small effects. The HSE was designed with oversized internal clearances in the expectation that adherent scale would form during operation. Improvements in machine efficiency of 3.5 to 4 percentage points were observed over some test periods with some scale deposition. A comparison with a 1-MW back-pressure turbine showed that the HSE can compete favorably under certain conditions. The HSE was found to be a rugged energy conversion machine for geothermal applications, but some subsystems were found to require further development. 7 refs., 28 figs., 5 tabs.« less

Evaluation of focal cartilage lesions of the knee using MRI T2 mapping and delayed Gadolinium Enhanced MRI of Cartilage (dGEMRIC).

PubMed

Årøen, Asbjørn; Brøgger, Helga; Røtterud, Jan Harald; Sivertsen, Einar Andreas; Engebretsen, Lars; Risberg, May Arna

2016-02-11

Assessment of degenerative changes of the cartilage is important in knee cartilage repair surgery. Magnetic Resonance Imaging (MRI) T2 mapping and delayed Gadolinium Enhanced MRI of Cartilage (dGEMRIC) are able to detect early degenerative changes. The hypothesis of the study was that cartilage surrounding a focal cartilage lesion in the knee does not possess degenerative changes. Twenty-eight consecutive patients included in a randomized controlled trial on cartilage repair were evaluated using MRI T2 mapping and dGEMRIC before cartilage treatment was initiated. Inclusion was based on disabling knee problems (Lysholm score of ≤ 75) due to an arthroscopically verified focal femoral condyle cartilage lesion. Furthermore, no major malalignments or knee ligament injuries were accepted. Mean patient age was 33 ± 9.6 years, and the mean duration of knee symptoms was 49 ± 60 months. The MRI T2 mapping and the dGEMRIC measurements were performed at three standardized regions of interest (ROIs) at the medial and lateral femoral condyle, avoiding the cartilage lesion The MRI T2 mapping of the cartilage did not demonstrate significant differences between condyles with or without cartilage lesions. The dGEMRIC results did not show significantly lower values of the affected condyle compared with the opposite condyle and the contra-lateral knee in any of the ROIs. The intraclass correlation coefficient (ICC) of the dGEMRIC readings was 0.882. The MRI T2 mapping and the dGEMRIC confirmed the arthroscopic findings that normal articular cartilage surrounded the cartilage lesion, reflecting normal variation in articular cartilage quality. NCT00885729 , registered April 17 2009.

Secure fixation of femoral bone plug with a suspensory button in anatomical anterior cruciate ligament reconstruction with bone-patellar tendon-bone graft

PubMed Central

TAKETOMI, SHUJI; INUI, HIROSHI; NAKAMURA, KENSUKE; YAMAGAMI, RYOTA; TAHARA, KEITARO; SANADA, TAKAKI; MASUDA, HIRONARI; TANAKA, SAKAE; NAKAGAWA, TAKUMI

2015-01-01

Purpose the efficacy and safety of using a suspensory button for femoral fixation in anatomical anterior cruciate ligament (ACL) reconstruction with bone-patellar tendon-bone (BPTB) graft have not been established. The purpose of the current study was to evaluate bone plug integration onto the femoral socket and migration of the bone plug and the EndoButton (EB) (Smith & Nephew, Andover, MA, USA) after rectangular tunnel ACL reconstruction with BPTB autograft. Methods thirty-four patients who underwent anatomical rectangular ACL reconstruction with BPTB graft using EB for femoral fixation and in whom three-dimensional (3D) computed tomography (CT) was performed one week and one year after surgery were included in this study. Bone plug integration onto the femoral socket, bone plug migration, soft tissue interposition, EB migration and EB rotation were evaluated on 3D CT. The clinical outcome was also assessed and correlated with the imaging outcomes. Results the bone plug was integrated onto the femoral socket in all cases. The incidence of bone plug migration, soft tissue interposition, EB migration and EB rotation was 15, 15, 9 and 56%, respectively. No significant association was observed between the imaging outcomes. The postoperative mean Lysholm score was 97.1 ± 5.0 points. The postoperative side-to-side difference, evaluated using a KT-2000 arthrometer, averaged 0.5 ± 1.3 mm. There were no complications associated with EB use. Imaging outcomes did not affect the postoperative KT side-to-side difference. Conclusions the EB is considered a reliable device for femoral fixation in anatomical rectangular tunnel ACL reconstruction with BPTB autograft. Level of evidence Level IV, therapeutic case series. PMID:26889465

Patient-reported outcome measures for patients with meniscal tears: a systematic review of measurement properties and evaluation with the COSMIN checklist

PubMed Central

Middleton, Robert; Beard, David J; Price, Andrew J; Hopewell, Sally

2017-01-01

Objective Meniscal tears occur frequently in the population and the most common surgical treatment, arthroscopic partial meniscectomy, is performed in approximately two million cases worldwide each year. The purpose of this systematic review is to summarise and critically appraise the evidence for the use of patient-reported outcome measures (PROMs) in patients with meniscal tears. Design A systematic review was undertaken. Data on reported measurement properties were extracted and the quality of the studies appraised according to Consensus-based Standards for the Selection of Health Measurement Instruments. Data sources A search of MEDLINE, Embase, AMED and PsycINFO, unlimited by language or publication date (last search 20 February 2017). Eligibility criteria for selecting studies Development and validation studies reporting the measurement properties of PROMs in patients with meniscal tears were included. Results 11 studies and 10 PROMs were included. The overall quality of studies was poor. For measurement of symptoms and functional status, there is only very limited evidence supporting the selection of either the Lysholm Knee Scale, International Knee Documentation Committee Subjective Knee Form or the Dutch version of the Knee injury and Osteoarthritis Outcome Score. For measuring health-related quality of life, only limited evidence supports the selection of the Western Ontario Meniscal Evaluation Tool (WOMET). Of all the PROMs evaluated, WOMET has the strongest evidence for content validity. Conclusion For patients with meniscal tears, there is poor quality and incomplete evidence regarding the validity of the currently available PROMs. Further research is required to ensure these PROMs truly reflect the symptoms, function and quality of life of patients with meniscal tears. PROSPERO registration number CRD42017056847. PMID:29030413

Posterior root tear of the medial meniscus in multiple knee ligament injuries.

PubMed

Kim, Young Jae; Kim, Jin Goo; Chang, Seok Hwan; Shim, Jae Chan; Kim, Sang Bum; Lee, Mi Young

2010-10-01

The purposes of the present study were to examine the frequency and characteristics of root tears of the medial meniscus associated with ligament injuries of the knee and to evaluate the effectiveness of pull-out repair for restoring meniscus function. We retrospectively analyzed the 9 patients (10 knees) with posterior root tears of the medial meniscus and ligament injuries of the knee treated between August 2004 and February 2007. All the patients were male, with average age of 29.8 years, and the mean follow-up period was 29.7 months. The pull-out suture technique was used to repair the root tears. Clinical outcomes were evaluated using the Lysholm, IKDC, and Tegner scores, as well as the McMurray and Apley tests. The mean follow-up period was 41.1 months (range, 30 to 63 months). The incidence of root tears of the medial meniscus with ligament injuries was 2.74% (10 cases in 365 ligament surgeries). All clinical results showed significant improvement. At the final follow-up, McMurray test showed one positive and nine negative cases, and the Apley test revealed two positive and eight negative cases. There were no positive findings in anterior drawer test, posterior drawer test, valgus and varus stress test, and posterolateral instability test. Healing of the root tear was confirmed by arthroscopy in five patients and by MR in four patients. Root tears of the medial meniscus may occur in multiple knee ligament injuries. It is important not to miss them. Our results indicate that pull-out repair provides satisfactory results and evidence of healing. Copyright 2009 Elsevier B.V. All rights reserved.

Clinical Outcome and Return to Competition after Microfracture in the Athlete’s Knee

PubMed Central

Mithoefer, Kai; Gill, Thomas J.; Cole, Brian J.; Williams, Riley J.; Mandelbaum, Bert R.

2010-01-01

Microfracture is frequently used for articular cartilage repair in athletes. This study aimed to define the strength and weaknesses of this minimally invasive cartilage repair technique in the athletic population in an effort to optimize indications, functional outcome, and athletic participation after microfracture in the athlete’s knee. A systematic analysis of original studies using microfracture in athletes was performed. Functional outcome was assessed by activity outcome scores, ability to return to sports participation, timing of the return to sport, level of postoperative sports activity, and continuation of athletic competition over time. Thirteen studies describing 821 athletes were included in the analysis with an average follow-up of 42 months. Good or excellent results were reported in 67% of athletes with normal International Knee Documentation Committee (IKDC) scores in 80% and significant increase of Lysholm scores, Tegner activity scores, and Knee injury and Osteoarthritis Outcome Score (KOOS) sports subscales. Return to sports was achieved in 66% at an average of 8 months after surgery, with return to competition at the preinjury level in 67%. Forty-nine percent of athletes continued to compete without change in level of play, while decreasing function was observed in 42% after 2 to 5 years. Athlete’s age, preoperative duration of symptoms, level of play, lesion size, and repair tissue morphology affected sports activity after microfracture. Microfracture improves knee function and frequently allows for return to sports at the preinjury level, but deterioration of athletic function occurs in some patients. Several independent factors were identified that can help to optimize the return to athletic competition after microfracture in the athlete’s knee. PMID:26069542

Comparison of the pre-shaped anatomical locking plate of 3.5 mm versus 4.5 mm for the treatment of tibial plateau fractures.

PubMed

Ehlinger, Matthieu; Adamczewski, Benjamin; Rahmé, Michel; Adam, Philippe; Bonnomet, Francois

2015-12-01

Treatment of tibial plateau fractures is discussed. A retrospective comparative study of fractures treated with an anatomical locking plate of 4.5 mm or 3.5 mm. Our hypothesis is that the 3.5 mm plates give an equivalent hold of fractures with comparable results and better clinical tolerance. From May 2010 to October 2011, 18 patients were operated on using a 4.5-mm LCP™ anatomical plate (group A) and 20 patients received a3.5-mm LCP™ anatomical plate (group B). Groups were comparable. One fracture was open. For the Group A, 14 patients had a follow up of 35.3 months and for the Group B, 16 patients had a follow up of 27 months. Mobility was comparable in both groups. The Hospital for Special Surgery (HSS) score was 86.4 versus 80.6, the Lysholm score was 83.6 versus 77 for groups A and B respectively. Consolidation was 3.25 months versus 3.35 months and mean axis was 183.1° versus 181.6° for groups A and B. Mechanical axes during revision were statistically different to the controlateral axes. One secondary displacement was noted in group A and one secondary displacement in group B. Group A had eight patients reporting discomfort with the material versus three in group B (p < 0.05). The hypothesis is proven. In regards to the results, there is no significant difference between the two groups but the clinical tolerance was better in group B. More time is needed in the long term to better evaluate these severe fractures.

Intra-ligamentary autologous conditioned plasma and healing response to treat partial ACL ruptures.

PubMed

Koch, Matthias; Matteo, Berardo Di; Eichhorn, Jürgen; Zellner, Johannes; Mayr, Felix; Krutsch, Werner; Achenbach, Leonard; Woehl, Rebecca; Nerlich, Michael; Angele, Peter

2018-05-01

Conservative treatment of partial ACL ruptures is associated with a high failure rate, and often patients undergo ACL reconstruction. ACL preservation by trephination of the ACL origin and application of Autologous Conditioned Plasma (ACP) seems to be an intriguing new treatment option to favour ACL tissue healing and avoid traditional reconstruction. The aim of this study was to describe the mid-term outcomes of this new ACL preserving technique. Twenty-four patients (mean age 41.8 years) affected by partial rupture of one or both ACL bundles were included in the present trial. The partial ACL tears were arthroscopically assessed and classified according to a new five step grading system. All patients were treated by trephination of the femoral ACL stump and intra-ligamentary application of ACP. The postoperative outcome was evaluated by both subjective scores and stability testing up to a mean of 25.1 months' follow-up. Adverse events and failure rate were also documented. Clinical outcome was good to excellent with IKDC subjective 82.7 (SD 11.8), Lysholm 87.6 (SD 8.1), Tegner 5.3 (SD 2.1), Cincinnati 88.7 (SD 14.8). The failure rate (i.e. persisting knee instability assessed clinically or by rolimeter) was 12.5%. At objective measurements, knee joints showed a firm endpoint in Lachman test, negative pivot shift phenomenon and a significant reduction in AP-laxity compared to pre-operative status by rolimeter testing (p = 0.002). Return to sport practice was achieved after mean 4.8 months (SD 4.1). ACL stump trephination and concomitant intra-ligamentary application of ACP revealed promising results at mid-term follow-up to treat partial ACL lesions.

Double-bundle anterior cruciate ligament reconstruction with and without remnant preservation - Comparison of early postoperative outcomes and complications.

PubMed

Nakayama, Hiroshi; Kambara, Syunichiro; Iseki, Tomoya; Kanto, Ryo; Kurosaka, Kenji; Yoshiya, Shinichi

2017-10-01

To compare the early postoperative outcomes and complications of double-bundle anterior cruciate ligament (ACL) reconstruction with and without remnant preservation. The study population comprised 125 consecutive knees that underwent double-bundle ACL reconstruction using hamstring autograft. Among the 125 knees, remnant preservation was indicated for 50 knees, while standard double-bundle reconstruction was performed in the remaining 75 knees. Postoperative evaluations included heel-height difference (HHD) at periodical follow-ups, number of knees requiring arthroscopic debridement due to problematic extension loss within six months, re-injury within one year, graft status upon second-look arthroscopy, and clinical examinations by Lysholm score and KT measurement at one year. All patients could be followed up for a minimum of one year after surgery. When the results obtained from both groups were compared, HHD values were significantly larger in the preservation group at three and six months, and the rate of knees requiring arthroscopic debridement was also higher in this group (12% versus 4.0%). Graft status on second-look arthroscopy was considered to be good for 92% of the knees in the preservation group versus 59% in the non-preservation group. Re-injury rates within one year were 2.0% in the preservation group and 5.3% in the non-preservation group. No significant differences in clinical examinations were found between the groups at one year. Remnant preservation in double-bundle hamstring autograft ACL reconstruction may enhance tissue healing; however, retention of the remnant with its full volume resulted in an increased incidence of postoperative problematic extension loss. Copyright © 2017 Elsevier B.V. All rights reserved.

Effect and safety of early weight-bearing on the outcome after open-wedge high tibial osteotomy: a systematic review and meta-analysis.

PubMed

Lee, O-Sung; Ahn, Soyeon; Lee, Yong Seuk

2017-07-01

The purpose of this systematic review and meta-analysis was to evaluate the effectiveness and safety of early weight-bearing by comparing clinical and radiological outcomes between early and traditional delayed weight-bearing after OWHTO. A rigorous and systematic approach was used. The methodological quality was also assessed. Results that are possible to be compared in two or more than two articles were presented as forest plots. A 95% confidence interval was calculated for each effect size, and we calculated the I 2 statistic, which presents the percentage of total variation attributable to the heterogeneity among studies. The random-effects model was used to calculate the effect size. Six articles were included in the final analysis. All case groups were composed of early full weight-bearing within 2 weeks. All control groups were composed of late full weight-bearing between 6 weeks and 2 months. Pooled analysis was possible for the improvement in Lysholm score, but there was no statistically significant difference shown between groups. Other clinical results were also similar between groups. Four studies reported mechanical femorotibial angle (mFTA) and this result showed no statistically significant difference between groups in the pooled analysis. Furthermore, early weight-bearing showed more favorable results in some radiologic results (osseointegration and patellar height) and complications (thrombophlebitis and recurrence). Our analysis supports that early full weight-bearing after OWHTO using a locking plate leads to improvement in outcomes and was comparable to the delayed weight-bearing in terms of clinical and radiological outcomes. On the contrary, early weight-bearing was more favorable with respect to some radiologic parameters and complications compared with delayed weight-bearing.

Cross-cultural adaptation and measurement properties of the Brazilian Portuguese Version of the Victorian Institute of Sport Assessment-Patella (VISA-P) scale.

PubMed

Wageck, Bruna Borges; de Noronha, Marcos; Lopes, Alexandre Dias; da Cunha, Ronaldo Alves; Takahashi, Ricardo Hisayoshi; Costa, Leonardo Oliveira Pena

2013-03-01

Clinical measurement. To translate, adapt, and test the measurement properties of the Brazilian Portuguese version of the Victorian Institute of Sport Assessment-Patella (VISA-P) questionnaire. It is important to objectively measure symptoms and functional limitations related to patellar tendinopathy using outcome measures that have been validated in the language of the target population. Cross-cultural adaptations are also useful to enhance the understanding of the measurement properties of an assessment tool, regardless of the target language. The VISA-P questionnaire was translated into Brazilian Portuguese, culturally adapted, and titled VISA-P Brazil. It was then administered on 2 occasions with a 24- to 48-hour interval between them, and a third time after a month of physical therapy treatment. The following measurement properties were analyzed: internal consistency, test-retest reliability, agreement, construct validity, floor and ceiling effects, and responsiveness. The VISA-P Brazil had high internal consistency (Cronbach α = .76; if item deleted, Cronbach α = .69-.78), excellent reliability and agreement (intraclass correlation coefficient = 0.91; 95% confidence interval: 0.85, 0.95; standard error of measurement, 5.2 points; minimal detectable change at the 90% confidence level, 12.2 points), and good construct validity (Pearson r = 0.60 compared to Lysholm). No ceiling and floor effects were detected for the VISA-P Brazil, and the responsiveness, based on 32 patients receiving physical therapy intervention for 1 month, demonstrated a large effect size of 0.97 (95% confidence interval: 0.68, 1.25). The VISA-P Brazil is a reproducible and responsive tool and can be used in clinical practice and research to assess the severity of pain and disability of patients with patellar tendinopathy.

A novel arthroscopic all-inside suture technique using the Fast-Fix 360 system for repairing horizontal meniscal tears in young athletes

PubMed Central

Atsumi, Satoru; Hara, Kunio; Arai, Yuji; Yamada, Manabu; Mizoshiri, Naoki; Kamitani, Aguri; Kubo, Toshikazu

2018-01-01

Abstract Rationale: Considering the risk of osteoarthritis following resection of a horizontally torn meniscus of the knee, repairing and preserving the meniscus as much as possible is preferred. We report 3 cases of restoration of horizontally torn menisci using a novel arthroscopic method we have called “all-inside interleaf vertical suture” that afforded preservation. Patient concerns: The 3 patients (aged 14, 17, and 21 years) had knee pain through sports activity. Diagnoses: All patients had horizontal tears in the posteromedial part of the meniscus. Interventions: The method uses Fast-Fix, whereby a first anchor is inserted from the tibial surface of the tear's superior leaflet and a second anchor is inserted from the femoral surface of the tear's inferior leaflet, and the 2 leaflets are closed using vertical suture. In all cases, the suture knots were embedded between the superior leaflet and inferior leaflet, avoiding contact with the articular cartilage, and superior leaflet and inferior leaflet crimping was good. Outcomes: All 3 were able to resume competing in sport and ≥ 1 year after surgery they had no pain and their postoperative mean Lysholm scores were 99.7. There were no complications or recurrence. On magnetic resonance imaging, the signal intensity of all the horizontal tears was high before surgery but low after surgery, suggesting that the repaired tear was healing. Lessons: The all-inside interleaf vertical suture procedure is a new surgical technique that can repair posteromedial horizontal meniscal tears of the knee of young people by easy crimping of the superior and inferior leaflets without the suture knots causing complications. PMID:29443758

Rapid chondrolysis of the knee after partial lateral meniscectomy in professional athletes.

PubMed

Sonnery-Cottet, Bertrand; Archbold, Pooler; Thaunat, Mathieu; Carnesecchi, Olivier; Tostes, Marcelo; Chambat, Pierre

2014-03-01

Postoperative knee joint chondrolysis is a rare but serious complication. The aim of our study is to report the clinical presentation, the early, mid and long-term outcomes of rapid chondrolysis after a partial lateral meniscectomy in elite athletes. Clinical records of 10 consecutive cases of rapid chondrolysis after partial lateral meniscectomy in eight professional athletes were retrospectively reviewed. There were seven males and one female with a mean age of 25.2 years (range 20-32 years) at index procedure. An initial conservative approach to its treatment was attempted in all cases. Arthroscopic lavage was advocated in two cases. Patients were clinically reviewed at last follow-up with comparative X-rays, a subjective IKDC, a Lysholm and Tegner scale. All patients resumed their pre-injury level of activity at a mean 8 (±2.45) months after the index procedure. At a mean of 82 (±36) months of follow-up, the mean subjective IKDC, Lyshom and Tegner scale were respectively 82.64 (±8.61), 86.6 (±6.44), 9 (±1.41). All knees demonstrated joint space narrowing scored Kellgren and Lawrence II (n=1) III (n=4) or IV (n=5) on conventional radiographs. By reviewing the common factors in each of these cases we believe that rapid chondrolysis occurs primarily due to the excessive loading of the articular cartilage in the lateral compartment of the knee. In this series, although the results in the medium term were good, the long-term outcome must be guarded due to the high rate of radiographic osteoarthritis of the lateral compartment seen in this population. Retrospective case series, Level IV. Copyright © 2014 Elsevier B.V. All rights reserved.

Long-term functional outcome following intramedullary nailing of femoral shaft fractures.

PubMed

el Moumni, Mostafa; Voogd, Emma Heather; ten Duis, Henk Jan; Wendt, Klaus Wilhelm

2012-07-01

The management of femoral shaft fractures using intramedullary nailing is a popular method. The purpose of this study was to evaluate the long-term functional outcome after antegrade or retrograde intramedullary nailing of traumatic femoral shaft fractures. We further determined predictors of these functional outcome scores. In a retrospective study, patients with a femoral shaft fracture but no other injuries to the lower limbs or pelvis were included. A total of 59 patients met the inclusion criteria. Functional outcome scores (Short Musculoskeletal Functional Assessment (SMFA), Western Ontario and McMaster University Osteoarthritis (WOMAC) index, Harris Hip Score (HHS) and the Lysholm knee function scoring scale) were measured at a mean of 7.8 years (± 3.5 years) postoperatively. The Visual Analogue Scale (VAS) was used to determine pain complaints of the lower limb. The range of motion (ROM) of the hip and knee joints was comparable between the injured and uninjured leg, regardless of the nailing technique. Correlation between ROM and the final outcome scores was found to be fair to moderate. Even years after surgery, 17% of the patients still reported moderate to severe pain. A substantial correlation was observed between VAS and the patient-reported outcome scores. The most significant predictor of functional outcome was pain in the lower limb. Our findings suggest that the ROM of hip and knee returns to normal over time, regardless of the nailing method used. However, pain in the lower limb is an important predictor and source of disability after femoral shaft fractures, even though most patients achieved good functional outcome scores. Copyright © 2012 Elsevier Ltd. All rights reserved.

First-generation autologous chondrocyte implantation in patients with cartilage defects of the knee: 7 to 14 years' clinical and magnetic resonance imaging follow-up evaluation.

PubMed

Moradi, Babak; Schönit, Eva; Nierhoff, Corinna; Hagmann, Sébastien; Oberle, Doris; Gotterbarm, Tobias; Schmitt, Holger; Zeifang, Felix

2012-12-01

The purpose of this study was to evaluate the overall long-term improvement of autologous chondrocyte implantation (ACI) treatment in terms of patient satisfaction, clinical assessment, and magnetic resonance imaging (MRI) evaluation. Furthermore, we aimed to assess the impact of independent variables on clinical outcomes and patient satisfaction. We evaluated 23 patients (mean age, 30.5 ± 8.2 years) with full-thickness chondral lesions of the distal femur who underwent first-generation ACI with periosteum between 1997 and 2004. The Lysholm score, Tegner activity score, subjective International Knee Documentation Committee score, numeric rating scale score, and Short Form 36 score were used for clinical assessment preoperatively, at 1 year postoperatively, and at 7 to 14 years (mean, 9.9 years) after surgery. MRI was performed to evaluate the cartilage preoperatively and at final follow-up, by use of the Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART) score. ACI resulted in a substantial improvement in all clinical outcome parameters, even as much as 14 years after implantation, although a small deterioration was noticed between intermediate and final evaluations in some outcome parameters. Of the patients, 73.1% stated that they would undergo the operation again. Younger patients with a shorter duration of preoperative symptoms and smaller defect sizes benefited most. MRI findings confirmed complete defect filling in 52.3% of the patients at final follow-up. Our long-term results confirm that first-generation ACI is an effective treatment for large full-thickness chondral and osteochondral lesions of the knee joint. Younger patients with a shorter duration of preoperative symptoms and smaller defect size benefited most in our study. Level IV, therapeutic case series. Copyright © 2012 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Magnetic Resonance Imaging and Functional Outcomes After a Polyurethane Meniscal Scaffold Implantation: Minimum 5-Year Follow-up.

PubMed

Monllau, Joan C; Poggioli, Francesco; Erquicia, Juan; Ramírez, Eduardo; Pelfort, Xavier; Gelber, Pablo; Torres-Claramunt, Raúl

2018-05-01

To report the magnetic resonance imaging (MRI) and clinical outcomes at a minimum 5-year follow-up in a series of patients with postmeniscectomy syndrome and treated with a polyurethane scaffold. All consecutive patients operated on from September 2008 to February 2011 for either persistent medial or lateral joint line compartmental pain receiving a polyurethane scaffold due to a previous partial meniscus resection with a minimum 5-year follow-up were included. Functional scores (Knee Injury and Osteoarthritis Outcomes Score, International Knee Documentation Committee, Lysholm, and Tegner) were assessed preoperatively and at the last follow-up. The state of the scaffold as well as postoperative scaffold extrusion and the total remaining meniscal volume was also evaluated in MRI. Thirty-two patients were included. The mean follow-up was 70.8 ± 7.5 months. The functionality of the knees improved in all the scores used (P < .001) except for the Tegner score that stayed steady. Most of meniscal implants showed extrusion of 2.4 mm (95% confidence interval [CI], 1.1-3.7) were smaller and a hyperintensity signal was seen in the MRI. Three scaffolds were resorbed at the last follow-up. The meniscal volume, determined by MRI, was 1.14 cm 3 (95% CI, 0.96-1.31) preoperatively and 1.61 cm 3 (95% CI, 1.43-1.7) at the last follow-up. No differences were presented. The use of a polyurethane meniscal scaffold in patients with a symptomatic meniscus deficit had a good functional outcome at 5 years after surgery. However, the implanted scaffolds did not present normal meniscal tissue with MRI, and the implant volume was considerably less than expected. The fact that most of patients included received different concomitant procedures during scaffold implantation introduces a degree of performance bias into the results. Level IV, case series. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Clinical and radiological outcomes after a quasi-anatomical reconstruction of medial patellofemoral ligament with gracilis tendon autograft.

PubMed

Monllau, Joan C; Masferrer-Pino, Àngel; Ginovart, Gerard; Pérez-Prieto, Daniel; Gelber, Pablo E; Sanchis-Alfonso, Vicente

2017-08-01

To analyse the clinical and radiological outcomes of a quasi-anatomical reconstruction of the medial patellofemoral ligament (MPFL) with a gracilis tendon autograft. Patients with objective recurrent patellar instability that were operated on from 2006 to 2012 were included. A quasi-anatomical surgical technique was performed using a gracilis tendon autograft. It was anatomically attached at the patella, and the adductor magnus tendon was also used as a pulley for femoral fixation (non-anatomical reconstruction). The IKDC, Kujala and Lysholm scores as well as Tegner and VAS for pain were collected preoperatively and at final follow-up. Radiographic measurements of patellar position tilt and signs of osteoarthritis (OA) as well as trochlear dysplasia were also recorded. Thirty-six patients were included. The mean age at surgery was 25.6 years. After a minimum 27 months of follow-up, all functional scores significantly improved (p < 0.001) with respect to the preoperative values. The VAS dropped from 6 (SD 2.48) to 2 (SD 1.58). No recurrence of dislocation was observed in this series. The apprehension sign was still apparent in one patient. The CT scan evaluation showed a significant decrease in patellar tilt (p < 0.001). On the Crosby and Insall grading scale, there were no changes in the radiological signs of OA. This specific MPFL reconstruction gives good clinical results and corrects patellar tilt. It did not affect the patellofemoral surfaces at the short term, as shown by the absence of radiological signs of OA in the CT scan. The procedure has been shown to be safe and suitable for the treatment of chronic patellar instability, including in adolescents with open physis. A new effective, inexpensive and easy-to-perform technique is described to reconstruct MPFL in the daily clinical practice. Therapeutic case series, Level IV.

Clinical and functional outcome of anterior cruciate ligament reconstruction in the recreational athlete over the age of 35.

PubMed

Novak, P J; Bach, B R; Hager, C A

1996-01-01

This study examined the functional, objective, and subjective outcome of anterior cruciate ligament (ACL) reconstruction in recreational athletes > or = 35 years after a minimum of 2 years of follow-up. Patients > or = 35 years who underwent ACL reconstruction by a single surgeon were identified from our surgical database. Nineteen knees in 18 (62% follow-up) patients were available for review by an independent examiner. The patients underwent physical examination, radiographs, functional testing, isokinetic strength testing, and instrumented ligament arthrometer testing. All were seen at a minimum of 2 years of follow-up. The average age was 40 years. Five of 19 underwent reconstruction less than 1 month after injury, and the remainder underwent reconstruction for chronic injuries. All patients preoperatively had at least a grade 2 Lachman and a positive pivot shift noted on physical examination. After a minimum of 2 years of follow-up, 17 of 18 patients had a stable knee on objective testing, including a negative Lachman and pivot shift. Seventeen patients (94%) had < 3 mm side-to-side difference on maximum manual arthrometric testing. Only one patient had > 3 cm prone heel height difference, and all patients had > 125 degrees of flexion. Mean thigh circumference difference was 0.5 cm. Isokinetic testing demonstrated a mean 11%, 7%, and 4% quadriceps asymmetry at 60 degrees, 180 degrees, and 240 degrees/second, respectively. However, functional testing revealed only a mean 6% asymmetry on vertical jump, single leg hop, and timed 6 meter hop. Seventeen of 18 patients were satisfied with their results. The mean postoperative Lysholm Rating Scale score was 93. The mean Noyes Sports Activity Scale score was 86, improved from 31 preoperatively. Thirteen of 18 returned to their preinjury level of sports performance. These results indicate that ACL reconstruction in patients over the age of 35 has functional, objective, and subjective results comparable to those of a younger patient population.

Second-look arthroscopic findings after open-wedge high tibia osteotomy focusing on the posterior root tears of the medial meniscus.

PubMed

Nha, Kyung-Wook; Lee, Yong Seuk; Hwang, Dae-Hee; Kwon, Jae Ho; Chae, Dong Ju; Park, Young Jee; Kim, Jong In

2013-02-01

This study examined, at second-look arthroscopy, the results of open-wedge high tibial osteotomy (HTO) focusing on root tear of the medial meniscus posterior horn (RTMMP). Among 31 consecutive patients who underwent HTO without a meniscectomy or pullout repair for RTMMP, 20 patients were available for second-look arthroscopic evaluation. All patients had medial unicompartmental arthritis. The healing status of the RTMMP was classified as complete, incomplete, and no healing. The difference in the weight bearing line from presurgery to the last follow-up was evaluated. Osteoarthritis and chondral lesions were evaluated, as were clinical results. Correlations between healing status and other variables (weight bearing line, cartilage status, and clinical scores) were assessed. The healed (10 patients) and nonhealed (incomplete 6 patients + no healing 4 patients) groups were also evaluated with respect to other variables. There were 10 (50%) cases with complete healing, 6 (30%) with incomplete healing, and 4 (20%) with no healing. Kellgren-Lawrence grade did not improve according to the standing plain radiograph (P = .09). Progression of chondral lesions was not observed at second-look arthroscopy; some improvement was even observed (P = .002). The median Lysholm score improved from 58 preoperatively to 88.5 at the last follow-up. The median Hospital for Special Surgery (HSS) score also increased significantly from 62.4 (range, 50 to 76) to 87.2 (range, 80 to 92; P = .003). The comparison between healed and nonhealed groups revealed no statistical differences in all variables. This study revealed a high rate of healing of RTMMP after HTO without attempted repair. Healing of the meniscus was not associated with an improved clinical outcome. Level IV, therapeutic case series. Copyright © 2013 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Anatomic single-bundle anterior cruciate ligament reconstruction improves walking economy: hamstrings tendon versus patellar tendon grafts.

PubMed

Iliopoulos, Efthymios; Galanis, Nikiforos; Zafeiridis, Andreas; Iosifidis, Michael; Papadopoulos, Pericles; Potoupnis, Michael; Geladas, Nikolaos; Vrabas, Ioannis S; Kirkos, John

2017-10-01

Anterior cruciate ligament (ACL) injury is associated with a pathologic gait pattern and increased energy cost during locomotion. ACL reconstruction could improve the gait pattern. Hamstrings tendon (HAM) and bone-patellar tendon-bone (BPTB) grafts are usually used for reconstruction. The aim of this study was to compare the efficacy of anatomic ACL reconstruction with HAM and BPTB grafts on improving and normalizing the energy cost and physiologic reserves during flat, uphill, and downhill walking. Twenty male subjects with unilateral ACL injuries were randomly assigned to ACL reconstruction with a HAM (n = 10) or BPTB (n = 10) graft. Ten matched controls were also enrolled. All participants performed three 8-min walking tasks at 0, +10, and -10 % gradients before and 9 months after surgery. Energy cost (oxygen consumption, VO 2 ), heart rate (HR), and ventilation (VE) were measured. Lysholm/IKDC scores were recorded. Pre-operatively, VO 2 , HR, and VE were higher in the HAM and BPTB groups than in controls during walking at 0, +10, and -10 % gradients (p < 0.001-0.01). Post-operatively, both HAM and BPTB groups showed reduced VO 2 , HR, and VE during the three walking tasks (p < 0.001-0.01). Although the post-operative VO 2 in both surgical groups reached 90-95 % of the normative (control) value during walking, it remained elevated against the value observed in controls (p < 0.001-0.01). The HAM and BPTB groups showed no differences in post-surgical VO 2 or HR during walking at all three gradients. Anatomic ACL reconstruction with either HAM or BPTB graft resulted in similar short-term improvements in energy cost and nearly normalized locomotion economy and cardiorespiratory reserves during flat, uphill, and downhill walking. The improved locomotion economy is an additional benefit of anatomic ACL reconstruction, irrespective of the type of graft used, that the orthopaedic surgeons should consider. II.

A matched-pair comparison of inlay and onlay trochlear designs for patellofemoral arthroplasty: no differences in clinical outcome but less progression of osteoarthritis with inlay designs.

PubMed

Feucht, Matthias J; Cotic, Matthias; Beitzel, Knut; Baldini, Julia F; Meidinger, Gebhart; Schöttle, Philip B; Imhoff, Andreas B

2017-09-01

To compare clinical and radiographic results after isolated patellofemoral arthroplasty (PFA) using either a second-generation inlay or onlay trochlear design. The hypothesis was that an inlay design will produce better clinical results and less progression of tibiofemoral osteoarthritis (OA) compared to an onlay design. Fifteen consecutive patients undergoing isolated PFA with an onlay design trochlear component (Journey™ PFJ, Smith & Nephew) were matched with 15 patients after isolated PFA with an inlay design trochlear component (HemiCAP ® Wave, Arthrosurface). Matching criteria were age, gender, body mass index, and follow-up period. An independent observer evaluated patients prospectively, whereas data were compared retrospectively. Clinical outcome was assessed using WOMAC, Lysholm score, and pain VAS. Kellgren-Lawrence grading was used to assess progression of tibiofemoral OA. Conversion to total knee arthroplasty was necessary in one patient within each group, leaving 14 patients per group for final evaluation. The mean follow-up was 26 months in the inlay group and 25 months in the onlay group (n.s.). Both groups displayed significant improvements of all clinical scores (p < 0.05). No significant differences were found between the two groups with regard to the clinical outcome and reoperation rate. No significant progression of tibiofemoral OA was observed in the inlay group, whereas 53 % of the onlay group showed progression of medial and/or lateral tibiofemoral OA (p = 0.009). Isolated PFA using either a second-generation inlay or onlay trochlear component significantly improves functional outcome scores and pain. The theoretical advantages of an inlay design did not result in better clinical outcome scores; however, progression of tibiofemoral OA was significantly less common in patients with an inlay trochlear component. This implant design may therefore improve long-term results and survival rates after isolated PFA. III.

Returning to sport after anterior cruciate ligament reconstruction in amateur sports men: a retrospective study.

PubMed

Notarnicola, Angela; Maccagnano, Giuseppe; Barletta, Federico; Ascatigno, Leonardo; Astuto, Leopoldo; Panella, Antonio; Tafuri, Silvio; Moretti, Biagio

2016-01-01

According to the literature, 95% of professional athletes return to their sport after anterior cruciate ligament (ACL) reconstruction surgery. The main objective of this study was to verify the return to sport after ACL reconstruction in a homogenous group of amateur sportsmen and sportswomen in a series of Italian patients. We designed a retrospective study in which we analyzed the amateur sports patients operated for ACL reconstruction. We verified whether they had returned to sporting activities by comparing the pre- and post-operative Tegner activity scores. We then analyzed the average time to restart the sporting activity and the Lysholm and International Knee Documenting Committee (IKDC) scores. We analyzed 80 subjects: 47.5% restarted a sports activity, on average after eight months, with a significant reduction of their competitive level or physical commitment, as expressed by the Tegner activity score (pre-operative: 6.9; post-operative: 3.9; p<0.01). The functional knee recovery was good, as expressed by the average score of the Lyshom Knee Scoring Scale (93.5) and the IKDC (74.7). In the literature, a return to sport for international case studies and amateur sports is higher than our data. In our population we found the lack of information provided by the medical staff at discharge and follow-up. The assessment at a short-term follow up allowed us to verify that at the end of the post-surgical rehabilitation program the patients were uninformed about the timing and the ability to resume a sporting activity. An efficacious relationship between orthopedic doctor, physiotherapist and a doctor in motorial science may ensure proper treatment the patient after ACL reconstruction. It is important to guarantee the restarting of the sports activity to have a better quality of life in amateur sports. Level of evidence: V.

Anterior cruciate ligament deficiency reduces walking economy in "copers" and "non-copers".

PubMed

Iliopoulos, Efthymios; Galanis, Nikiforos; Iosifidis, Michael; Zafeiridis, Andreas; Papadopoulos, Pericles; Potoupnis, Michael; Geladas, Nikolaos; Vrabas, Ioannis S; Kirkos, John

2017-05-01

Patients with ACL injury requiring surgical treatment (non-copers) demonstrate altered neuromuscular control and gait pattern compared with those returning to their pre-injury activities without surgery (copers). Pathological gait pattern may increase the energy cost of walking. We compared the energy cost of flat, uphill, and downhill walking between ACL-deficient and healthy individuals and between "copers" and "non-copers". Nineteen young males with unilateral ACL injury were allocated into "copers" and "non-copers" according to their ability to return to pre-injury activity without ACL reconstruction. Lysholm and IKDC scales were recorded, and a control group (n = 10) matched for physical characteristics and activity levels was included. All participants performed 8-min walking tasks at 0, +10, and -10 % gradients. Energy cost was assessed by measurement of oxygen consumption (VO 2 ). HR and ventilation (VE), respiratory exchange ratio (RER), and VE/VO 2 were also measured. VO 2 and HR were higher in ACL-deficient patients than in controls during walking at 0, +10, and -10 % gradients (p < 0.01-0.05). There were no differences between "copers" and "non-copers" in VO 2 and HR for any gradient. No differences were observed in VE, RER, and VE/VO 2 among the three groups. The walking economy of level, uphill, and downhill walking is reduced in ACL-deficient patients. Despite the improved functional and clinical outcome of "copers", their walking economy appears similar to that of "non-copers" but impaired compared with healthy individuals. The higher energy demand and effort during locomotion in "copers" and "non-copers" has clinical implications for designing safer rehabilitation programmes. The increased energy cost in "copers" may be another parameter to consider when deciding on the most appropriate therapeutic intervention (operative and non-operative), particularly for athletes. II.

Effects of initial graft tension on femoral tunnel widening after anatomic anterior cruciate ligament reconstruction using a bone-patellar tendon-bone graft.

PubMed

Taketomi, Shuji; Inui, Hiroshi; Tahara, Keitaro; Shirakawa, Nobuyuki; Tanaka, Sakae; Nakagawa, Takumi

2017-09-01

The effects of initial graft tension upon tunnel widening (TW) following anatomic anterior cruciate ligament (ACL) reconstruction have not been elucidated. The purpose of this study was to retrospectively investigate the effect of two different graft-tensioning protocols upon femoral TW following anatomic ACL reconstruction using a bone-patellar tendon-bone (BPTB) graft and a three-dimensional (3D) computed tomography (CT) model. Forty-three patients who underwent isolated ACL reconstruction using BPTB grafts were included in this study. In 18 out of the 43 patients, the graft was fixed at full knee extension with manual maximum pull (Group H). These patients were compared with 25 patients in whom the BPTB graft was fixed at full knee extension with 80-N pull (Group L). Tunnel aperture area was measured using 3D CT 1 week and 1 year postoperatively, thus enabling us to calculate the percentage change in the area of femoral tunnel aperture. Clinical assessment was performed 1 year postoperatively, corresponding to the time period of CT assessment, and involved the evaluation of Lysholm score, anterior knee stability using a KneeLax3 arthrometer, and the pivot-shift test. When measured at 1 year postoperatively, the mean area of the femoral tunnel aperture had increased by 78.6 ± 36.8% in Group H when compared with at 1 week postoperatively, whereas that of Group L had increased by 27.7 ± 32.3%. Furthermore, TW (%) in Group H was significantly greater than that of Group L (P < 0.001). No significant differences were detected between the two groups with regard to any of the clinical outcomes evaluated. High levels of initial graft tension resulted in greater TW of the femoral tunnel aperture following anatomical ACL reconstruction using BPTB grafts. However, such levels of graft tension did not affect clinical outcome.

A statistically compiled test battery for feasible evaluation of knee function after rupture of the Anterior Cruciate Ligament - derived from long-term follow-up data.

PubMed

Schelin, Lina; Tengman, Eva; Ryden, Patrik; Häger, Charlotte

2017-01-01

Clinical test batteries for evaluation of knee function after injury to the Anterior Cruciate Ligament (ACL) should be valid and feasible, while reliably capturing the outcome of rehabilitation. There is currently a lack of consensus as to which of the many available assessment tools for knee function that should be included. The present aim was to use a statistical approach to investigate the contribution of frequently used tests to avoid redundancy, and filter them down to a proposed comprehensive and yet feasible test battery for long-term evaluation after ACL injury. In total 48 outcome variables related to knee function, all potentially relevant for a long-term follow-up, were included from a cross-sectional study where 70 ACL-injured (17-28 years post injury) individuals were compared to 33 controls. Cluster analysis and logistic regression were used to group variables and identify an optimal test battery, from which a summarized estimator of knee function representing various functional aspects was derived. As expected, several variables were strongly correlated, and the variables also fell into logical clusters with higher within-correlation (max ρ = 0.61) than between clusters (max ρ = 0.19). An extracted test battery with just four variables assessing one-leg balance, isokinetic knee extension strength and hop performance (one-leg hop, side hop) were mathematically combined to an estimator of knee function, which acceptably classified ACL-injured individuals and controls. This estimator, derived from objective measures, correlated significantly with self-reported function, e.g. Lysholm score (ρ = 0.66; p<0.001). The proposed test battery, based on a solid statistical approach, includes assessments which are all clinically feasible, while also covering complementary aspects of knee function. Similar test batteries could be determined for earlier phases of ACL rehabilitation or to enable longitudinal monitoring. Such developments, established on a well-grounded consensus of measurements, would facilitate comparisons of studies and enable evidence-based rehabilitation.

Revision anterior cruciate ligament reconstruction by double-bundle technique using multi-strand semitendinosus tendon.

PubMed

Muneta, Takeshi; Hara, Kenji; Ju, Young-Jin; Mochizuki, Tomoyuki; Morito, Toshiyuki; Yagishita, Kazuyoshi; Sekiya, Ichiro

2010-06-01

The purpose of the study was to compare the outcome of revision anterior cruciate ligament (ACL) reconstruction by the double-bundle (DB) technique using multi-strand semitendinosus tendon with that of primary reconstruction by use of the same technique. The study included 21 patients who underwent revision ACL reconstruction (mean follow-up, 40 months) with the semitendinosus tendon DB technique between 1995 and 2006 and 86 unilateral primary DB ACL reconstructions (mean follow-up, 33 months) between 2000 and 2004. The outcome of both groups was compared based on differences between operated and unoperated limbs and modified International Knee Documentation Committee grades. Both the overall and sports-related subjective scores were evaluated between the 2 groups. The KT measurements (MEDmetric, San Diego, CA) averaged 1.7 mm (SD, 1.8 mm) in the revision group and 1.5 mm (SD, 1.6 mm) in the primary group. There was no significant difference in KT measurements between the 2 groups. The Lachman test was negative in 83% of revision cases and 87% of primary cases; the anterior drawer test was negative in 83% and 91%, respectively, and the pivot-shift test was negative in 78% and 90%, respectively. There was a tendency for a positive pivot-shift test in the revision group being higher. The Lysholm score and subjective recovery score were significantly lower in the revision group. The semitendinosus tendon DB revision procedure provided range of motion and anterior stability comparable to those after primary DB surgery and a comparable return to athletic activities. However, the patients tended to have positive pivot-shift test results. The revision cases were also inferior in terms of the general evaluation of recovery of knee condition. The outcome scores were lower overall in the revision group. Level IV, therapeutic case series. Copyright (c) 2010 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Return to knee-strenuous sport after anterior cruciate ligament reconstruction: a report from a rehabilitation outcome registry of patient characteristics.

PubMed

Hamrin Senorski, Eric; Samuelsson, Kristian; Thomeé, Christoffer; Beischer, Susanne; Karlsson, Jón; Thomeé, Roland

2017-05-01

To characterise patients who returned to knee-strenuous sports after an anterior cruciate ligament (ACL) reconstruction. Data from isotonic tests of muscle function and patient-reported outcome measures, Tegner activity scale (Tegner and Lysholm in Clin Orthop Relat Res 198:43-49, 1985), physical activity scale, knee injury and osteoarthritis scale and knee self-efficacy scale were extracted from a registry. The 157 included patients, 15-30 years of age, had undergone primary ACL reconstruction and were all involved in knee-strenuous sports, i.e. pre-injury Tegner of 6 or higher. Return to sport was studied in two different ways: return to pre-injury Tegner and return to knee-strenuous sport (Tegner 6). Fifty-two patients (33 %), who returned to pre-injury Tegner, 10 months after surgery, were characterised by better subjective knee function measured with the knee injury and osteoarthritis outcome score (p < 0.05), compared with patients who did not. These patients also had higher perceived self-efficacy of knee function (p < 0.01), measured with knee self-efficacy scale. Eighty-four patients (54 %) who returned to knee-strenuous sports, i.e. Tegner 6 or higher, were characterised by higher goals for physical activity (p < 0.01) and higher self-efficacy of future knee function (p < 0.05). Strength measurements showed that women who returned to sports were stronger in leg extension than women who did not. No differences were found in Limb Symmetry Index for knee strength or jumping ability. Patients who returned to sports after ACL reconstruction had better subjective knee function and higher self-efficacy of knee function. Results highlight that further emphasis should be placed at psychological factors during rehabilitation of patients after ACLR. II.

The effectiveness of Pilates for partial anterior cruciate ligament injury.

PubMed

Çelik, Derya; Turkel, Nilgun

2017-08-01

This study explored the effects of Pilates on the muscle strength, function, and instability of patients with partial anterior cruciate ligament (ACL) injuries in situations in which a non-surgical treatment option is preferred. Fifty participants 20-45 years of age who were diagnosed with isolated ACL injuries were included in the study. The participants were randomly assigned to either the Pilates exercise group (n = 24) or the control group (n = 26). The subjects in the Pilates exercise group performed basic mat exercises that focused on the muscle strength and flexibility of the lower limbs and core muscles during each class session, which met three times per week for 12 weeks. The control group did not receive any treatment or home exercise programme. All patients were evaluated using the Lysholm Knee Scale, the Cincinnati Knee Rating System, and isokinetic quadriceps and hamstring strength. Patient satisfaction regarding improvement in knee stability was assessed using the Global Rating of Change scale. The Pilates group experienced significant improvement over the control group as measured by the difference in quadriceps strength at 12 weeks (p = 0.03). Both groups showed some clinical change over time, but the Pilates group improved for all outcome measurements at the 12-week follow-up, and the control group only improved for functional outcomes. Patient satisfaction with the level of knee stability based on the Global Rating of Change scale was higher in the Pilates group than in the control group. Although both groups exhibited improvements in knee strength and functional outcomes, the results suggest that Pilates is a superior management approach over a control treatment for increasing quadriceps strength in participants with partial ACL injury. Pilates may provide clinicians a novel option when choosing a treatment for a partial ACL injury. Further study is needed to determine whether certain subgroups of individuals might achieve an added benefit with this approach. II.

Returning to sport after anterior cruciate ligament reconstruction in amateur sports men: a retrospective study

PubMed Central

Notarnicola, Angela; Maccagnano, Giuseppe; Barletta, Federico; Ascatigno, Leonardo; Astuto, Leopoldo; Panella, Antonio; Tafuri, Silvio; Moretti, Biagio

2016-01-01

Summary Background According to the literature, 95% of professional athletes return to their sport after anterior cruciate ligament (ACL) reconstruction surgery. The main objective of this study was to verify the return to sport after ACL reconstruction in a homogenous group of amateur sportsmen and sportswomen in a series of Italian patients. Materials and methods We designed a retrospective study in which we analyzed the amateur sports patients operated for ACL reconstruction. We verified whether they had returned to sporting activities by comparing the pre- and post-operative Tegner activity scores. We then analyzed the average time to restart the sporting activity and the Lysholm and International Knee Documenting Committee (IKDC) scores. Results We analyzed 80 subjects: 47.5% restarted a sports activity, on average after eight months, with a significant reduction of their competitive level or physical commitment, as expressed by the Tegner activity score (pre-operative: 6.9; post-operative: 3.9; p<0.01). The functional knee recovery was good, as expressed by the average score of the Lyshom Knee Scoring Scale (93.5) and the IKDC (74.7). Conclusions In the literature, a return to sport for international case studies and amateur sports is higher than our data. In our population we found the lack of information provided by the medical staff at discharge and follow-up. The assessment at a short-term follow up allowed us to verify that at the end of the post-surgical rehabilitation program the patients were uninformed about the timing and the ability to resume a sporting activity. An efficacious relationship between orthopedic doctor, physiotherapist and a doctor in motorial science may ensure proper treatment the patient after ACL reconstruction. It is important to guarantee the restarting of the sports activity to have a better quality of life in amateur sports. Level of evidence: V. PMID:28217571

Clinical, radiological, and morphological evaluations of posterior horn tears of the lateral meniscus left in situ during anterior cruciate ligament reconstruction.

PubMed

Lee, Dhong Won; Jang, Hyoung Won; Lee, Sung Rak; Park, Jung Ho; Ha, Jeong Ku; Kim, Jin Goo

2014-02-01

Recent studies have shown that lateral menisci have a higher healing potential and that they can be treated successfully without symptoms by being left in situ during anterior cruciate ligament (ACL) reconstruction. However, few studies have reported morphological results. Stable posterior horn tears of the lateral meniscus left in situ during ACL reconstruction could be healed spontaneously and would result in not only successful clinical outcomes but also morphological restoration. Cohort study; Level of evidence, 3. Among 367 patients who underwent primary ACL reconstruction between 2008 and 2010, 53 patients who had lateral meniscus tears that were left in situ were analyzed. These patients were evaluated subjectively and radiologically and compared with a matched control group that underwent ACL reconstruction without any other structural disorders. Of the 53 patients with stable posterior horn tears of the lateral meniscus left in situ, 28 patients were assessed by second-look arthroscopic surgery and magnetic resonance imaging (MRI). The mean follow-up of the study group and the control group was 36.47 and 37.26 months, respectively. There were no statistical differences in postoperative clinical outcomes between the 2 groups. Clinical results of both groups including the Lysholm score, Tegner activity score, and International Knee Documentation Committee (IKDC) score significantly improved. In the subgroup composed of 28 patients, follow-up MRI showed 25 (89%) and 24 (86%) healed menisci in sagittal and coronal views, respectively. Twenty-one (75%) were considered to be completely healed, and 5 (18%) were incompletely healed on second-look arthroscopic surgery. Stable posterior horn tears of the lateral meniscus left in situ at the time of ACL reconstruction revealed successful clinical outcomes compared with isolated ACL injuries and showed considerable healing and functional restoration of tears with repeat MRI and second-look arthroscopic surgery. Therefore, leaving stable posterior horn tears of the lateral meniscus in situ during ACL reconstruction should be considered.

[In situ suture repair procedure of knee dislocation with multiple-ligament injury at acute stage].

PubMed

Ye, Jingbing; Luo, Dahui; Fu, Weili; He, Xin; Li, Jian

2009-09-01

To investigate the method and the short term clinical effectiveness of in situ suture repair procedure of knee dislocation with multiple-ligament injury at acute stage. From February 2006 to November 2007, 9 patients suffering from single knee closed dislocation with multiple-ligament injury underwent open in situ suture repair procedure with non-absorbable thread and managements of other combined injuries simultaneously. Nine patients included 6 males and 3 females, aged 34-52 years old. The injured knees were left side in 4 cases and right side in 5 cases. Injuries were caused by traffic accident in 8 cases and heavy-weight crushing in 1 case. EMRI and arthroscopic examination showed that all patients suffered from the avulsion injuries of anterior cruciate ligament and posterior cruciate ligament. The time from injury to operation was 4 to 7 days with an average of 5.1 days. No bacterial arthritis occurred after operation. Subcutaneous ligated fat occurred and cured after symptomatic treatment in 2 cases, other incisions healed by first intension. All patients were followed up 12 months. At 12 months postoperatively, 2 patients' flexion range of the suffering knees lost 10 degrees when to compared with normal knees, and the range of motion was from 0 to 125 degrees. The Lysholm knee scores were 83-92 (average 86.3), the results were excellent in 3 cases and good in 6 cases. The posterior drawer test and anterior drawer test were one-degree positive in 3 cases respectively; the Lachman tests were one-degree positive in 5 cases, lateral stress tests were negative in all cases. In situ suture repair procedure of knee dislocation with multiple-ligament injury at acute stage has the advantages such as reliable fixation, simultaneous management of other combined injuries and satisfactory short term effect.

Systemic Review of Anatomic Single- Versus Double-Bundle Anterior Cruciate Ligament Reconstruction: Does Femoral Tunnel Drilling Technique Matter?

PubMed

Zhang, Yang; Xu, Caiqi; Dong, Shiqui; Shen, Peng; Su, Wei; Zhao, Jinzhong

2016-09-01

To provide an up-to-date assessment of the difference between anatomic double-bundle anterior cruciate ligament (ACL) reconstruction (DB-ACLR) and anatomic single-bundle ACL reconstruction (SB-ACLR). We hypothesized that anatomic SB-ACLR using independent femoral drilling technique would be able to achieve kinematic stability as with anatomic DB-ACLR. A comprehensive Internet search was performed to identify all therapeutic trials of anatomic DB-ACLR versus anatomic SB-ACLR. Only clinical studies of Level I and II evidence were included. The comparative outcomes were instrument-measured anterior laxity, Lachman test, pivot shift, clinical outcomes including objective/subjective International Knee Documentation Committee (IKDC) score, Lysholm score, Tegner activity scale and complication rates of extension/flexion deficits, graft failure, and early osteoarthritis. Subgroup analyses were performed for femoral tunnel drilling techniques including independent drilling and transtibial (TT) drilling. Twenty-two clinical trials of 2,261 anatomically ACL-reconstructed patients were included in the meta-analysis. Via TT drilling technique, anatomic DB-ACLR led to improved instrument-measured anterior laxity with a standard mean difference (SMD) of -0.42 (95% confidence interval [CI] = -0.81 to -0.02), less rotational instability measured by pivot shift (SMD = 2.76, 95% CI = 1.24 to 6.16), and higher objective IKDC score with odds ratio (OR) of 2.28 (95% CI = 1.19 to 4.36). Via independent drilling technique, anatomic DB-ACLR yielded better pivot shift (SMD = 2.04, 95% CI = 1.36 to 3.05). Anatomic DB-ACLR also revealed statistical significance in subjective IKDC score compared with anatomic SB-ACLR (SMD = 0.27, 95% CI = 0.05 to 0.49). Anatomic DB-ACLR showed better anterior and rotational stability and higher objective IKDC score than anatomic SB-ACLR via TT drilling technique. Via independent drilling technique, however, anatomic DB-ACLR only showed superiority of rotational stability. All clinical function outcomes except subjective IKDC score were not significantly different between anatomic DB-ACLR and SB-ACLR. Level II, meta-analysis of Level I and II studies. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

A Systematic Review of the Outcomes of Posterolateral Corner Knee Injuries, Part 1: Surgical Treatment of Acute Injuries.

PubMed

Geeslin, Andrew G; Moulton, Samuel G; LaPrade, Robert F

2016-05-01

There is a paucity of outcome data to guide the surgical treatment of acute grade III posterolateral corner (PLC) knee injuries. To systematically review the literature to compare clinical outcomes of the treatment for acute grade III PLC injuries. Systematic review; Level of evidence, 4. A systematic review of the literature including Cochrane, PubMed, Medline, and Embase was performed. The following search terms were used: posterolateral corner knee, posterolateral knee, posterolateral instability, multiligament knee, and knee dislocation. Inclusion criteria were outcome studies of surgically treated acute PLC injuries with a minimum 2-year follow-up, subjective outcomes, objective outcomes including varus stability, and subgroup data on PLC injuries. Two investigators independently reviewed all abstracts. Accepted definitions of varus stability on examination or stress radiographs and the need for revision surgery were used to categorically define success and failure. Eight studies with a total of 134 patients were included. The mean patient age was reported in 7 studies (range, 21-31.5 years). The mean time to surgery was reported in 5 studies (range, 15-24.3 days); surgery was performed within 3 weeks in the other 3 studies. Four studies reported International Knee Documentation Committee scores (range, 78.1-91.3); 5 studies reported Lysholm scores (range, 87.5-90.3). Only 3 studies obtained bilateral varus stress radiographs. Based on an objective evaluation with varus stress examinations or radiographs, there was an overall success rate of 81% and failure rate of 19%. In 2 studies, the fibular collateral ligament and popliteus tendon were repaired and staged cruciate reconstruction performed in most patients; there were 17 failures of 45 patients (38%). In the remainder of the studies, patients were treated with local tissue transfer, hybrid repair for amenable structures or reconstruction for midsubstance tears, or reconstruction of all torn structures; the failure rate was 9%. The repair of acute grade III PLC injuries and staged treatment of combined cruciate injuries were associated with a substantially higher postoperative PLC failure rate. Further research is required to identify the reconstruction technique that provides optimal subjective and objective outcomes. © 2015 The Author(s).

Translation, cross-cultural adaptation, reliability and validity of the Turkish version of the Western Ontario Meniscal Evaluation Tool (WOMET).

PubMed

Celik, Derya; Demirel, Murat; Kuş, Gamze; Erdil, Mehmet; Özdinçler, Arzu Razak

2015-03-01

The Western Ontario Meniscal Evaluation Tool (WOMET) is a questionnaire designed to evaluate quality of life related to the health (HRQOL) of patients with meniscus pathology. The purpose of this study was to translate and culturally adapt the WOMET into Turkish, and thereby to determine the reliability and validity of the translated version. The WOMET was translated into Turkish in accordance with the stages recommended by Guillemin. Ninety-six patients [35 male, 61 female; mean age: 43.6 ± 11.7 (23-71) years] with meniscal pathology were included in the study. The WOMET was completed twice at 3-7-day intervals. The inter-rater correlation coefficient was used for reliability, and Cronbach's α was used for internal consistency. Patients were asked to answer the Lysholm knee scale and the short form-36 (SF-36) for the validity of the estimation. The distribution of ceiling and floor effects was determined. Mean and standard deviation of the first and second evaluations of the total WOMET were 1,048.9 ± 271.6 and 1,000.4 ± 255.2 (p = 0.03), respectively. The test-retest reliability of the total score, physical function, sports/work/lifestyle and emotion domains were 0.88, 0.78, 0.80 and 0.85, respectively. Cronbach's α was 0.89. WOMET was most strongly related to the physical function scale and the physical component score (ρ 0.54, ρ 0.60, respectively; p < 0.001). The weakest correlations between the WOMET and the SF-36 were for the mental component score and the emotional role functioning (ρ 0.11, ρ 0.03, respectively). We observed no ceiling and floor effects of the overall WOMET score, but 36.5 % of the patients showed floor effect in the question of "numbness", and 40.6 % of the patients showed ceiling effect in the question of "consciousness". The Turkish version of the WOMET is valid and reliable. It can therefore be used for HRQOL of patients with meniscal pathology.

Measuring individual hierarchy of anxiety invoking sports related activities: development and validation of the Photographic Series of Sports Activities for Anterior Cruciate Ligament Reconstruction (PHOSA-ACLR).

PubMed

van Lankveld, Wim; van Melick, Nicky; Habets, Bas; Roelofsen, Eefje; Staal, J Bart; van Cingel, Robert

2017-07-04

Fear of harm (FoH) after Anterior Cruciate Ligament Reconstruction (ACLR) should be addressed in physical therapy as it hampers return to sports. However, there are no instruments assessing FoH specific for ACLR. The objective of this study is to describe the development and measurement properties of the Photograph Series of Sports Activities for ACLR (PHOSA-ACLR) measuring ACL injury related FoH. Based on literature and opinion of physical therapists with extensive experience in ACLR treatment, photographs depicting FoH inducing situations in ACL injury were considered for inclusion in the instrument. For each photograph the patients is asked to report perceived harmfulness. The set of photographs was completed by two samples of patients with ACLR: 1 cross-sectional sample (n = 55), and 1 test-retest reliability sample (n = 58). Internal consistency and structural validity were assessed in 109 patients. In 58 patients criterion validity was assessed by calculating pearson correlations with the Tampa Scale of Kinesiophobia (TSK). Correlations with self-reported knee function (KOOS and Lysholm score), and Knee Self-efficacy Scale (K-SES) were computed for hypothesis testing. Test-retest reliability was determined in a group of 55 patients, assessed twice with 1 week between assessments. Twelve photographs depicting sports related movements that are likely to invoke FoH after ACLR were selected. Two items were deleted because of lack of discrimination. The remaining 10 items were included in the PHOSA-ACLR, and the scale showed excellent internal consistency (Cronbach's Alpha is .95). Items reflected one dimension, and was strongly correlated with TSK (r = .59). A priori formulated hypotheses are confirmed and test-retest correlation was excellent (ICC = .86). The PHOSA-ACLR showed acceptable measurement properties. The PHOSA-ACLR gives specific information about fear invoking sports situations that are not measured by other kinesophobia measures. Therefore, the PHOSA-ACLR might be a valuable additional tool in rehabilitation of ACLR patients. Additional research is needed to determine responsiveness to change.

[Efficacy observation on knee osteoarthritis treated with electroacupuncture and its influence on articular cartilage with T2 mapping].

PubMed

Bao, Fei; Zhang, Yan; Wu, Zhi-Hong; Wang, Yan; Sheng, Min; Hu, Na; Feng, Feng; Wang, Dao-Hai; Zhang, Yun-Xiang; Li, Tao; Sun, Hua

2013-03-01

To observe therapeutic efficacy of osteoarthritis treated by electroacupuncture, and explore its function of promoting cartilage restoration. According to random digital table, sixty cases of knee osteoarthritis (60 knees) were randomly divided into an electroacupuncture group and a physiotherapy group, 15 cases (30 knees) in each one. The electroacupuncture was applied at Neixiyan (EX-LE 4), Dubi (ST 35), Heding (EX-LE 2) and Xuehai (SP 10) in the electroacupuncture group, once every other day. The physiotherapy group was treated by medium-frequency therapeutic apparatus every day. For both groups, 4 weeks of treatment were required. The Lysholm knee scoring scale (LKSS) was used to evaluate and compare the knee joints function before and after treatment. At the same time, the GE Signa EXCITE Twin Speed HD 1.5T was used to take MRI examination of knee joints, and measure the T2 values in 10 sub-regions of the cartilage of tibiofemoral joints. Compared before treatment, the LKSS score of both groups were improved with significant differences except item demands for support (P < 0.01, P < 0.05). Between the two groups after treatment, there were significant differences on total score, item instability and swelling (all P < 0.05), the electroacupuncture group was better than the physiotherapy group, but no significant difference on the other items (all P > 0.05). In the electroacupuncture group after treatment, T2 value in anterior lateral tibial sub-region (LTa) was significantly lowered (P < 0.05), but no significant difference in the other nine sub-regions (all P > 0.05). In the physiotherapy group, T2 value in any sub-region was not significantly different before and after treatment (all P > 0.05). Electroacupuncture could effectively improve the symptom, sign and knee joint's function of patients with knee osteoarthritis. Compared with physiotherapy, it has more superior effect and considered as a better non-operative treatment for osteoarthritis. Electroacupuncture also has positive influence on T2 value in cartilage, indicating that electroacupuncture may have the function of promoting cartilage restoration.

Treating patella fractures with a fixed-angle patella plate-A prospective observational study.

PubMed

Wild, Michael; Fischer, Kai; Hilsenbeck, Florian; Hakimi, Mohssen; Betsch, Marcel

2016-08-01

Anterior tension wiring using Kirschner wires (K-wires) is still considered the standard treatment for patella fractures, despite its high complication rate. The objective of this prospective clinical study was to evaluate intra- and perioperative complications as well as the clinical outcome of patients with patella fracture treated with a new developed bilateral, polyaxial, fixed-angle 2.7mm patella plate. Between 2011 and 2014 all patients with a patella fracture were included in this prospective study and treated with a fixed-angle patella plate. Avulsion fractures of the inferior or superior pole of the patella were excluded. All fractures were classified according to the AO/OTA fracture classification. During a twelve-month follow up period all intra- and postoperative complications were recorded as well as the time until fracture healing. One year postoperatively the Lysholm Score, the pre- and postoperative Tegner Score, the Hospital for Special Surgery Knee Score (HSS), the Turba Score, the Oxford Knee Score, the Knee injury and Osteoarthritis Outcome Score (KOOS), the Bostman Score and the Iowa Knee Score were surveyed. Altogether, 20 patella fractures in 19 patients were included in this prospective study. The most frequent type of fracture, n=10, was a simple transverse patella fracture (C1), followed by 7 comminuted patella fractures (C3) and 3 T-shaped patella fractures (C2). During the 12-month follow up period two patients treated with the patella plate had a complication. In one patient a superficial wound infection occurred, which was treated successfully with hardware removal and in one patient a fracture dislocation due to an implant failure occurred. X-rays demonstrated complete bony healing in all fractures on average 3.2 months postoperatively. All knee scores showed good to excellent clinical results one year postoperatively. The results of this first clinical study indicate that the fixed-angle patella plate is an effective and safe treatment option for patella fractures with a short operative learning curve. The treatment of communited patella fractures (C3) with a fixed-angle patella plate should be well-considered to avoid distending the indication and biomechanical properties. Copyright © 2016 Elsevier Ltd. All rights reserved.

Clinical results of hamstring autografts in anterior cruciate ligament reconstruction: a comparison of femoral knot/press-fit fixation and interference screw fixation.

PubMed

Ho, Wei-Pin; Lee, Chian-Her; Huang, Chang-Hung; Chen, Chih-Hwa; Chuang, Tai-Yuan

2014-07-01

To compare the clinical outcomes of femoral knot/press-fit anterior cruciate ligament (ACL) reconstruction with conventional techniques using femoral interference screws. Among patients who underwent arthroscopic ACL reconstruction with hamstring autografts, 73 were treated with either a femoral knot/press-fit technique (40 patients, group A) or femoral interference screw fixation (33 patients, group B). The clinical results of the 2 groups were retrospectively compared. The inclusion criteria were primary ACL reconstruction in active patients. The exclusion criteria were fractures, multiligamentous injuries, patients undergoing revision, or patients with contralateral ACL-deficient knees. In the femoral knot/press-fit technique, semitendinosus and gracilis tendons were prepared as 2 loops with knots. After passage through a bottleneck femoral tunnel, the grafts were fixed with a press-fit method (grafts' knots were stuck in the bottleneck of the femoral tunnel). A tie with Mersilene tape (Ethicon, Somerville, NJ) over a bone bridge for each tendon loop and an additional bioabsorbable interference screw were used for tibial fixation. The mean follow-up period was 38 months (range, 24 to 61 months). A significant improvement in knee function and symptoms was reported in most patients, as shown by improved Tegner scores, Lysholm knee scores, and International Knee Documentation Committee assessments (P < .01). The results of instrumented laxity testing, thigh muscle assessment, and radiologic assessment were clearly improved when compared with the preoperative status (P < .01). No statistically significant difference in outcomes could be observed between group A and group B (P = not significant). In this nonrandomized study, femoral knot/press-fit ACL reconstruction did not appear to provide increased anterior instability compared with that of conventional femoral interference screw ACL reconstruction. Favorable outcomes with regard to knee stability and patient satisfaction were achieved in most of our ACL-reconstructed patients using femoral knot/press-fit fixation with hamstring tendon autograft. Level IV, therapeutic case series. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

MR appearance of autologous chondrocyte implantation in the knee: correlation with the knee features and clinical outcome.

PubMed

Takahashi, Tomoki; Tins, Bernhard; McCall, Iain W; Richardson, James B; Takagi, Katsumasa; Ashton, Karen

2006-01-01

To relate the magnetic resonance imaging (MRI) appearance of autologous chondrocyte implantation (ACI) in the knee in the 1st postoperative year with other knee features on MRI and with clinical outcome. Forty-nine examinations were performed in 49 patients at 1 year after ACI in the knee. Forty-one preoperative magnetic resonance (MR) examinations were also available. The grafts were assessed for smoothness, thickness in comparison with that of adjacent cartilage, signal intensity, integration to underlying bone and adjacent cartilage, and congruity of subchondral bone. Presence of overgrowth and bone marrow appearance beneath the graft were also assessed. Presence of osteophyte formation, further cartilage defects, appearance of the cruciate ligaments and the menisci were also recorded. An overall graft score was constructed, using the graft appearances. This was correlated with the knee features and the Lysholm score, a clinical self-assessment score. The data were analysed by a Kruskal-Wallis H test followed by a Mann-Whitney U test with Bonferroni correction as post-hoc test. Of 49 grafts, 32 (65%) demonstrated complete defect filling 1 year postoperatively. General overgrowth was seen in eight grafts (16%), and partial overgrowth in 13 grafts (26%). Bone marrow change underneath the graft was seen; oedema was seen in 23 grafts (47%), cysts in six grafts (12%) and sclerosis in two grafts (4%). Mean graft score was 8.7 (of maximal 12) (95% CI 8.0-9.5). Knees without osteophyte formation or additional other cartilage defects (other than the graft site) had a significantly higher graft score than knees with multiple osteophytes (P=0.0057) or multiple further cartilage defects (P=0.014). At 1 year follow-up improvement in the clinical scores was not significantly different for any subgroup. Knees with a graft score of 8 points or greater had a better improvement of the clinical score than those of 7 points or fewer. At 1 year follow-up after ACI, higher graft scores are associated with an overall better preserved knee joint. ACI improves the clinical outcome, but there is no statistically significant correlation of graft score and clinical outcome.

Can Competitive Athletes Return to High-Level Play After Osteochondral Allograft Transplantation of the Knee?

PubMed

McCarthy, Mark A; Meyer, Maximilian A; Weber, Alexander E; Levy, David M; Tilton, Annemarie K; Yanke, Adam B; Cole, Brian J

2017-09-01

To investigate functional outcomes among competitive athletes undergoing osteochondral allograft (OCA) transplantation of the knee, including rates of return to play (RTP), and factors preventing RTP. A retrospective review identified all competitive athletes (high school, intercollegiate, professional) undergoing isolated femoral condyle OCA from 2004 to 2013. Patient-reported outcome (PRO) questionnaires (Lysholm, International Knee Documentation Committee [IKDC], Knee Injury and Osteoarthritis Outcome Score [KOOS], Western Ontario and McMasters Universities Arthritis Index [WOMAC], 12-Item Short Form Health Survey [SF-12], Tegner, and Marx) and custom RTP surveys were administered. All subsequent reoperations were documented. Thirteen athletes (4 intercollegiate, 9 high-school) were identified with an average follow-up of 5.9 ± 2.5 years. Seven athletes (54%) returned to competitive sport at an average of 7.9 ± 3.5 months, 5 of whom returned to preinjury functional levels. Of the 8 athletes who either did not return to competitive sport or failed to sustain their high level of play, the most common reasons cited were graduation from high school or college (4 patients, 50%) or fear of reinjury (3 patients, 38%). All 4 patients citing graduation as the primary factor preventing return to preinjury level of competitive sport resumed recreational sport without limitations, yielding an adjusted RTP rate of 10 patients (77%) who either returned to competitive play or believed they could return if they had not graduated. At final follow-up, athletes reported significant improvements in all PRO scores except for KOOS-Sport, WOMAC-Stiffness, and SF-12 Mental subscales. There were 3 reoperations at an average of 3.8 ± 3.3 years after the index OCA. There were no instances of graft failure. OCAs provide an adjusted RTP rate of 77% for high-level adolescent athletes. Social factors may be more likely than persistent pain to prevent return to sport. Level IV, therapeutic case series. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

All-Inside, All-Epiphyseal Anterior Cruciate Ligament Reconstruction in Skeletally Immature Athletes: Return to Sport, Incidence of Second Surgery, and 2-Year Clinical Outcomes.

PubMed

Cordasco, Frank A; Mayer, Stephanie Watson; Green, Daniel W

2017-03-01

Anterior cruciate ligament (ACL) injuries in skeletally immature athletes are increasing. To evaluate the 2-year clinical outcomes of all-inside, all-epiphyseal ACL reconstruction in skeletally immature athletes with 3 to 6 years of remaining growth, with a focus on return to sport and the incidence of second surgery. Case series; Level of evidence, 4. Twenty-three skeletally immature athletes were prospectively evaluated after all-epiphyseal ACL reconstruction utilizing a hamstring autograft. The athletes' age, sex, sport, mechanism of injury, radiographs, and magnetic resonance imaging (MRI) findings were noted. The evaluation included a physical examination, KT-1000 arthrometer measurements, isokinetic testing, and validated outcome scores. Standing radiographs and spoiled gradient recalled echo MRI scans were obtained at 6, 12, and 24 months postoperatively. A quality of movement assessment and return-to-sport performance analysis were also performed. Of the 23 athletes, 6 were female (mean age, 11.3 years), and 17 were male (mean age, 12.6 years). At a minimum follow-up of 2 years (range, 24-45 months), the mean International Knee Documentation Committee score was 94.6 ± 4.9, the mean Lysholm score was 97.9 ± 4.0, the mean Marx activity rating scale score was 13.4 ± 3.6, and the mean Hospital for Special Surgery Pediatric Functional Activity Brief Scale score was 23.9 ± 7.0. Lachman and pivot-shift test results were negative in all patients. The mean side-to-side difference on the KT-1000 arthrometer was 0.9 ± 0.5 mm and less tight on the operated side. No significant growth disturbances were noted; however, 6 athletes had a leg-length discrepancy of more than 5 mm (range, 6-18 mm). Two patients had overgrowth in the femur of more than 15 mm (16 mm and 18 mm). Two athletes (8.7%) required second surgery. The mean time to return to unrestricted activity was 13.5 months (range, 8-22 months). The all-inside, all-epiphyseal ACL reconstruction technique using a hamstring autograft demonstrates excellent subjective and objective clinical outcomes in skeletally immature athletes without physeal arrest.

Cartilage Restoration of the Knee: A Systematic Review and Meta-analysis of Level 1 Studies.

PubMed

Mundi, Raman; Bedi, Asheesh; Chow, Linda; Crouch, Sarah; Simunovic, Nicole; Sibilsky Enselman, Elizabeth; Ayeni, Olufemi R

2016-07-01

Focal cartilage defects of the knee are a substantial cause of pain and disability in active patients. There has been an emergence of randomized controlled trials evaluating surgical techniques to manage such injuries, including marrow stimulation (MS), autologous chondrocyte implantation (ACI), and osteochondral autograft transfer (OAT). A meta-analysis was conducted to determine if any single technique provides superior clinical results at intermediate follow-up. Systematic review and meta-analysis of randomized controlled trials. The MEDLINE, EMBASE, and Cochrane Library databases were systematically searched and supplemented with manual searches of PubMed and reference lists. Eligible studies consisted exclusively of randomized controlled trials comparing MS, ACI, or OAT techniques in patients with focal cartilage defects of the knee. The primary outcome of interest was function (Lysholm score, International Knee Documentation Committee score, Knee Osteoarthritis Outcome Score) and pain at 24 months postoperatively. A meta-analysis using standardized mean differences was performed to provide a pooled estimate of effect comparing treatments. A total of 12 eligible randomized trials with a cumulative sample size of 765 patients (62% males) and a mean (±SD) lesion size of 3.9 ± 1.3 cm(2) were included in this review. There were 5 trials comparing ACI with MS, 3 comparing ACI with OAT, and 3 evaluating different generations of ACI. In a pooled analysis comparing ACI with MS, there was no difference in outcomes at 24-month follow-up for function (standardized mean difference, 0.47 [95% CI, -0.19 to 1.13]; P = .16) or pain (standardized mean difference, -0.13 [95% CI, -0.39 to 0.13]; P = .33). The comparisons of ACI to OAT or between different generations of ACI were not amenable to pooled analysis. Overall, 5 of the 6 trials concluded that there was no significant difference in functional outcomes between ACI and OAT or between generations of ACI. There is no significant difference between MS, ACI, and OAT in improving function and pain at intermediate-term follow-up. Further randomized trials with long-term outcomes are warranted. © 2015 The Author(s).

Tibial slope correction combined with second revision ACL produces good knee stability and prevents graft rupture.

PubMed

Dejour, David; Saffarini, Mo; Demey, Guillaume; Baverel, Laurent

2015-10-01

Revision ACL reconstruction requires careful analysis of failure causes particularly in cases of two previous graft ruptures. Intrinsic factors as excessive tibial slope or narrow femoral notch increase failure risks but are rarely addressed in revision surgery. The authors report outcomes, at minimum follow-up of 2 years, for second revision ACL reconstructions combined with tibial deflexion osteotomy for correction of excessive slope (>12°). Nine patients that underwent second revision ACL reconstruction combined with tibial deflexion osteotomy were retrospectively studied. The mean age was 30.3 ± 4.4 years (median 28; range 26-37), and mean follow-up was 4.0 ± 2.0 years (median 3.6; range 2.0-7.6). Autografts were harvested from the quadriceps tendon (n = 8) or hamstrings (n = 1), and tibial osteotomy was done by anterior closing wedge, without detachment of the patellar tendon, to obtain a slope of 3° to 5°. All patients had fused osteotomies, stable knees, and there were no intraoperative or postoperative complications. The mean posterior tibial slope decreased from 13.2° ± 2.6° (median 13°; range 12°-18°) preoperatively to 4.4° ± 2.3° (median 4°; range 2°-8°) postoperatively. The mean Lysholm score was 73.8 ± 5.8 (median 74; range 65-82), and the IKDC-SKF was 71.6 ± 6.1 (median 72.8; range 62.2-78.5). The satisfactory results of second revision ACL reconstruction combined with tibial deflexion osteotomy at minimum follow-up of 2 years suggest that tibia slope correction protects reconstructed ACL from fatigue failure in this study. The authors stress the importance of careful analysis failure causes prior to revision ACL reconstruction, and recommend correction of tibial slope if it exceeds 12°, to reduce the risks of graft retear. III.

Suture versus FasT-Fix all-inside meniscus repair at time of anterior cruciate ligament reconstruction.

PubMed

Choi, Nam-Hong; Kim, Byeong-Yeon; Hwang Bo, Byung-Hun; Victoroff, Brian N

2014-10-01

To compare meniscal healing and functional outcomes after all-inside meniscal repair between sutures and meniscal fixation devices. Sixty patients with a tear within the red-red or red-white zones of the posterior horn of the medial or lateral meniscus in conjunction with an anterior cruciate ligament (ACL) tear were included in this study. Meniscal repairs were performed with sutures in 35 patients and the FasT-Fix device (Smith & Nephew Endoscopy, Andover, MA) in 25 patients concomitantly with hamstring ACL reconstruction. Postoperative evaluations included Lysholm knee score, Tegner activity scale, Lachman and pivot-shift tests, and KT-1000 arthrometer (MEDmetric, San Diego, CA) testing. Follow-up magnetic resonance imaging (MRI) scans were obtained postoperatively for all patients to evaluate meniscal healing. The mean follow-up period was 47.2 months. In the suture group, 31 patients (86.1%) were asymptomatic and 4 (13.9%) were symptomatic. In the FasT-Fix group, 20 patients (80%) were asymptomatic and 5 (20%) were symptomatic. Postoperative functional evaluation and knee stability showed no statistically significant difference between the 2 groups. Follow-up MRI showed that 26 menisci (74.3%) were healed, 3 menisci (8.6%) were partially healed, and 6 menisci (17.1%) were not healed in the suture group. In the FasT-Fix group, 15 menisci (64%) were healed, 7 menisci (24%) were partially healed, and 3 menisci (12%) were not healed. Follow-up MRI showed no statistically significant difference between the 2 groups. In the FasT-Fix group, follow-up MRI showed a newly developed cyst posterior to the medial meniscus in 2 patients. A new tear anterior to the previous tear was found in 1 patient. In the suture group, follow-up MRI showed no cysts or new tears. All-inside meniscal repairs using either sutures or the FasT-Fix device showed satisfactory results in patients with concomitant hamstring ACL reconstruction. There was no statistically significant difference in meniscal healing evaluated by MRI and functional outcomes between the 2 techniques. Level III, retrospective comparative study. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Restoring tibiofemoral alignment during ACL reconstruction results in better knee biomechanics.

PubMed

Zampeli, Frantzeska; Terzidis, Ioannis; Espregueira-Mendes, João; Georgoulis, Jim-Dimitris; Bernard, Manfred; Pappas, Evangelos; Georgoulis, Anastasios D

2018-05-01

Anterior cruciate ligament (ACL) reconstruction (ACLR) aims to restore normal knee joint function, stability and biomechanics and in the long term avoid joint degeneration. The purpose of this study is to present the anatomic single bundle (SB) ACLR that emphasizes intraoperative correction of tibiofemoral subluxation that occurs after ACL injury. It was hypothesized that this technique leads to optimal outcomes and better restoration of pathological tibiofemoral joint movement that results from ACL deficiency (ACLD). Thirteen men with unilateral ACLD were prospectively evaluated before and at a mean follow-up of 14.9 (SD = 1.8) months after anatomic SB ACLR with bone patellar tendon bone autograft. The anatomic ACLR replicated the native ACL attachment site anatomy and graft orientation. Emphasis was placed on intraoperative correction of tibiofemoral subluxation by reducing anterior tibial translation (ATT) and internal tibial rotation. Function was measured with IKDC, Lysholm and the Tegner activity scale, ATT was measured with the KT-1000 arthrometer and tibial rotation (TR) kinematics were measured with 3Dmotion analysis during a high-demand pivoting task. The results showed significantly higher TR of the ACL-deficient knee when compared to the intact knee prior to surgery (12.2° ± 3.7° and 10.7° ± 2.6° respectively, P = 0.014). Postoperatively, the ACLR knee showed significantly lower TR as compared to the ACL-deficient knee (9.6°±3.1°, P = 0.001) but no difference as compared to the control knee (n.s.). All functional scores were significantly improved and ATT was restored within normal values (P < 0.001). Intraoperative correction of tibiofemoral subluxation that results after ACL injury is an important step during anatomic SB ACLR. The intraoperative correction of tibiofemoral subluxation along with the replication of native ACL anatomy results in restoration of rotational kinematics of ACLD patients to normal levels that are comparable to the control knee. These results indicate that the reestablishment of tibiofemoral alignment during ACLR may be an important step that facilitates normal knee kinematics postoperatively. Level II, prospective cohort study.

A statistically compiled test battery for feasible evaluation of knee function after rupture of the Anterior Cruciate Ligament – derived from long-term follow-up data

PubMed Central

2017-01-01

Purpose Clinical test batteries for evaluation of knee function after injury to the Anterior Cruciate Ligament (ACL) should be valid and feasible, while reliably capturing the outcome of rehabilitation. There is currently a lack of consensus as to which of the many available assessment tools for knee function that should be included. The present aim was to use a statistical approach to investigate the contribution of frequently used tests to avoid redundancy, and filter them down to a proposed comprehensive and yet feasible test battery for long-term evaluation after ACL injury. Methods In total 48 outcome variables related to knee function, all potentially relevant for a long-term follow-up, were included from a cross-sectional study where 70 ACL-injured (17–28 years post injury) individuals were compared to 33 controls. Cluster analysis and logistic regression were used to group variables and identify an optimal test battery, from which a summarized estimator of knee function representing various functional aspects was derived. Results As expected, several variables were strongly correlated, and the variables also fell into logical clusters with higher within-correlation (max ρ = 0.61) than between clusters (max ρ = 0.19). An extracted test battery with just four variables assessing one-leg balance, isokinetic knee extension strength and hop performance (one-leg hop, side hop) were mathematically combined to an estimator of knee function, which acceptably classified ACL-injured individuals and controls. This estimator, derived from objective measures, correlated significantly with self-reported function, e.g. Lysholm score (ρ = 0.66; p<0.001). Conclusions The proposed test battery, based on a solid statistical approach, includes assessments which are all clinically feasible, while also covering complementary aspects of knee function. Similar test batteries could be determined for earlier phases of ACL rehabilitation or to enable longitudinal monitoring. Such developments, established on a well-grounded consensus of measurements, would facilitate comparisons of studies and enable evidence-based rehabilitation. PMID:28459885

Incidence of Concurrent Peroneal Nerve Injury in Multiligament Knee Injuries and Outcomes after Knee Reconstruction.

PubMed

Worley, John R; Brimmo, Olubusola; Nuelle, Clayton W; Cook, James L; Stannard, James P

2018-06-13

The purpose of this study was to determine incidence of concurrent peroneal nerve injury and to compare outcomes in patients with and without peroneal nerve injury after surgical treatment for multiligament knee injuries (MLKIs). A retrospective study of 357 MLKIs was conducted. Patients with two or more knee ligaments requiring surgical reconstruction were included. Mean follow-up was 35 months (0-117). Incidence of concurrent peroneal nerve injury was noted and patients with and without nerve injury were evaluated for outcomes. Concurrent peroneal nerve injury occurred in 68 patients (19%). In patients with nerve injury, 45 (73%) returned to full duty at work; 193 (81%) patients without nerve injury returned to full duty ( p  = 0.06). In patients with nerve injury, 37 (60%) returned to their previous level of activity; 148 (62%) patients without nerve injury returned to their previous level of activity ( p  = 0.41). At final follow-up, there were no significant differences in level of pain (mean visual analog scale 1.6 vs. 2; p  = 0.17), Lysholm score (mean 88.6 vs. 88.8; p  = 0.94), or International Knee Documentation Committee score (mean 46.2 vs. 47.8; p  = 0.67) for patients with or without peroneal nerve injury, respectively. Postoperative range of motion (ROM) (mean 121 degrees) was significantly lower ( p  = 0.02) for patients with nerve injury compared with patients without nerve injury (mean 127 degrees). Concurrent peroneal nerve injury occurred in 19% of patients in this large cohort suffering MLKIs. After knee reconstruction surgery, patients with concurrent peroneal nerve injuries had significantly lower knee ROM and trended toward a lower rate of return to work. However, outcomes with respect to activity level, pain, and function were not significantly different between the two groups. This study contributes to our understanding of patient outcomes in patients with concurrent MLKI and peroneal nerve injury, with a focus on the patient's ability to return to work and sporting activity. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Data Documentation for Navy Civilian Manpower Study,

DTIC Science & Technology

1986-09-01

Engineering 0830 Mechanical Engineer 0840 Nuclear Engineering 0850 Electrical Engineering 0855 Electronics Engineering 0856 Electronics ...OCCUPATIONAL LEVEL (DONOL) CODES DONOL code Title 1060 Engineering Drafting 1061 Electronics Technician w 1062 Engineering Technician 1063 Industrial...Architect 2314 Electrical Engineer 2315 Electronic Engineer 2316 Industrial Engineer 2317 Mechanical Engineer 2318

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2014 CFR

2014-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2013 CFR

2013-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2012 CFR

2012-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2011 CFR

2011-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

Engineering Ethics in the Subject of Engineering History

NASA Astrophysics Data System (ADS)

Isohata, Hiroshi

Engineering ethics has been focused in the field of engineering education since the introduction of accreditation system of engineering education. In this paper, contents of the subject of engineering history are examined and discussed from the viewpoints of education of engineering ethics through a practical case of civil engineering history in a college. For the first step, codes of engineering ethics regulated in various engineering organizations are analyzed and the common contents are extracted to set the requirements for the education of engineering ethics. Then contents of the subject of engineering history are examined according to the requirements. Finally, conditions of engineering history for engineering ethics are discussed.

Perturbing engine performance measurements to determine optimal engine control settings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Li; Lee, Donghoon; Yilmaz, Hakan

Methods and systems for optimizing a performance of a vehicle engine are provided. The method includes determining an initial value for a first engine control parameter based on one or more detected operating conditions of the vehicle engine, determining a value of an engine performance variable, and artificially perturbing the determined value of the engine performance variable. The initial value for the first engine control parameter is then adjusted based on the perturbed engine performance variable causing the engine performance variable to approach a target engine performance variable. Operation of the vehicle engine is controlled based on the adjusted initialmore » value for the first engine control parameter. These acts are repeated until the engine performance variable approaches the target engine performance variable.« less

Key Reliability Drivers of Liquid Propulsion Engines and A Reliability Model for Sensitivity Analysis

NASA Technical Reports Server (NTRS)

Huang, Zhao-Feng; Fint, Jeffry A.; Kuck, Frederick M.

2005-01-01

This paper is to address the in-flight reliability of a liquid propulsion engine system for a launch vehicle. We first establish a comprehensive list of system and sub-system reliability drivers for any liquid propulsion engine system. We then build a reliability model to parametrically analyze the impact of some reliability parameters. We present sensitivity analysis results for a selected subset of the key reliability drivers using the model. Reliability drivers identified include: number of engines for the liquid propulsion stage, single engine total reliability, engine operation duration, engine thrust size, reusability, engine de-rating or up-rating, engine-out design (including engine-out switching reliability, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction), propellant specific hazards, engine start and cutoff transient hazards, engine combustion cycles, vehicle and engine interface and interaction hazards, engine health management system, engine modification, engine ground start hold down with launch commit criteria, engine altitude start (1 in. start), Multiple altitude restart (less than 1 restart), component, subsystem and system design, manufacturing/ground operation support/pre and post flight check outs and inspection, extensiveness of the development program. We present some sensitivity analysis results for the following subset of the drivers: number of engines for the propulsion stage, single engine total reliability, engine operation duration, engine de-rating or up-rating requirements, engine-out design, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction, and engine health management system implementation (basic redlines and more advanced health management systems).

Engineering Review Information System

NASA Technical Reports Server (NTRS)

Grems, III, Edward G. (Inventor); Henze, James E. (Inventor); Bixby, Jonathan A. (Inventor); Roberts, Mark (Inventor); Mann, Thomas (Inventor)

2015-01-01

A disciplinal engineering review computer information system and method by defining a database of disciplinal engineering review process entities for an enterprise engineering program, opening a computer supported engineering item based upon the defined disciplinal engineering review process entities, managing a review of the opened engineering item according to the defined disciplinal engineering review process entities, and closing the opened engineering item according to the opened engineering item review.

Concurrently adjusting interrelated control parameters to achieve optimal engine performance

DOEpatents

Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

2015-12-01

Methods and systems for real-time engine control optimization are provided. A value of an engine performance variable is determined, a value of a first operating condition and a value of a second operating condition of a vehicle engine are detected, and initial values for a first engine control parameter and a second engine control parameter are determined based on the detected first operating condition and the detected second operating condition. The initial values for the first engine control parameter and the second engine control parameter are adjusted based on the determined value of the engine performance variable to cause the engine performance variable to approach a target engine performance variable. In order to cause the engine performance variable to approach the target engine performance variable, adjusting the initial value for the first engine control parameter necessitates a corresponding adjustment of the initial value for the second engine control parameter.

Component improvement of free-piston Stirling engine key technology for space power

NASA Technical Reports Server (NTRS)

Alger, Donald L.

1988-01-01

The successful performance of the 25 kW Space Power Demonstrator (SPD) engine during an extensive testing period has provided a baseline of free piston Stirling engine technology from which future space Stirling engines may evolve. Much of the success of the engine was due to the initial careful selection of engine materials, fabrication and joining processes, and inspection procedures. Resolution of the few SPD engine problem areas that did occur has resulted in the technological advancement of certain key free piston Stirling engine components. Derivation of two half-SPD, single piston engines from the axially opposed piston SPD engine, designated as Space Power Research (SPR) engines, has made possible the continued improvement of these engine components. The two SPR engines serve as test bed engines for testing of engine components. Some important fabrication and joining processes are reviewed. Also, some component deficiencies that were discovered during SPD engine testing are described and approaches that were taken to correct these deficiencies are discussed. Potential component design modifications, based upon the SPD and SPR engine testing, are also reported.

Engine systems analysis results of the Space Shuttle Main Engine redesigned powerhead initial engine level testing

NASA Technical Reports Server (NTRS)

Sander, Erik J.; Gosdin, Dennis R.

1992-01-01

Engineers regularly analyze SSME ground test and flight data with respect to engine systems performance. Recently, a redesigned SSME powerhead was introduced to engine-level testing in part to increase engine operational margins through optimization of the engine internal environment. This paper presents an overview of the MSFC personnel engine systems analysis results and conclusions reached from initial engine level testing of the redesigned powerhead, and further redesigns incorporated to eliminate accelerated main injector baffle and main combustion chamber hot gas wall degradation. The conclusions are drawn from instrumented engine ground test data and hardware integrity analysis reports and address initial engine test results with respect to the apparent design change effects on engine system and component operation.

Engine having multiple pumps driven by a single shaft

DOEpatents

Blass, James R.

2001-01-01

An engine comprises an engine housing. A first engine fluid sub-system that includes a first pump and the engine housing defining a first fluid passage is also included in the engine. The engine also includes at least one additional engine fluid sub-system that includes a second pump and the engine housing defining a second fluid passage. A rotating shaft is at least partially positioned in the engine housing, the first pump and the second pump.

Engineering Education for a New Era

NASA Astrophysics Data System (ADS)

Ohgaki, Shinichiro

Engineering education is composed of five components, the idea what engineering education ought to be, the knowledge in engineering fields, those who learn engineering, those who teach engineering and the stakeholders in engineering issues. The characteristics of all these five components are changing with the times. When we consider the engineering education for the next era, we should analyze the changes of all five components. Especially the knowledge and tools in engineering fields has been expanding, and advanced science and technology is casting partly a dark shadow on the modern convenient life. Moral rules or ethics for developing new products and engineering systems are now regarded as most important in engineering fields. All those who take the responsibility for engineering education should understand the change of all components in engineering education and have a clear grasp of the essence of engineering for sustainable society.

78 FR 5710 - Airworthiness Directives; Engine Alliance Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... Airworthiness Directives; Engine Alliance Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... all Engine Alliance GP7270 and GP7277 turbofan engines. This AD requires initial and repetitive...) Applicability This AD applies to all Engine Alliance GP7270 and GP7277 turbofan engines with a high-pressure...

78 FR 775 - Goodman Networks, Inc. Core Network Engineering (Deployment Engineering) Division Alpharetta, GA...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

...,846B; TA-W-81,846C; TA-W-81,846D] Goodman Networks, Inc. Core Network Engineering (Deployment Engineering) Division Alpharetta, GA; Goodman Networks, Inc. Core Network Engineering (Deployment Engineering) Division Hunt Valley, MD; Goodman Networks, Inc. Core Network Engineering (Deployment Engineering) Division...

40 CFR 91.115 - Certification procedure-determining engine power and engine families.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engine power and engine families. 91.115 Section 91.115 Protection of Environment ENVIRONMENTAL... ENGINES Emission Standards and Certification Provisions § 91.115 Certification procedure—determining engine power and engine families. (a) Engine power must be calculated using SAE J1228. This procedure has...

14 CFR 23.777 - Cockpit controls.

Code of Federal Regulations, 2013 CFR

2013-01-01

... powerplant controls for each engine must be located to prevent confusion as to the engines they control. (1... engines(s) and the right control(s) operates the right engine(s). (2) On twin-engine airplanes with front and rear engine locations (tandem), the left powerplant controls must operate the front engine and the...

14 CFR 23.777 - Cockpit controls.

Code of Federal Regulations, 2014 CFR

2014-01-01

... powerplant controls for each engine must be located to prevent confusion as to the engines they control. (1... engines(s) and the right control(s) operates the right engine(s). (2) On twin-engine airplanes with front and rear engine locations (tandem), the left powerplant controls must operate the front engine and the...

Biocatalysis engineering: the big picture.

PubMed

Sheldon, Roger A; Pereira, Pedro C

2017-05-22

In this tutorial review we describe a holistic approach to the invention, development and optimisation of biotransformations utilising isolated enzymes. Increasing attention to applied biocatalysis is motivated by its numerous economic and environmental benefits. Biocatalysis engineering concerns the development of enzymatic systems as a whole, which entails engineering its different components: substrate engineering, medium engineering, protein (enzyme) engineering, biocatalyst (formulation) engineering, biocatalytic cascade engineering and reactor engineering.

Technician Career Opportunities in Engineering Technology.

ERIC Educational Resources Information Center

Engineers' Council for Professional Development, New York, NY.

Career opportunities for engineering technicians are available in the technologies relating to air conditioning, heating, and refrigeration, aviation and aerospace, building construction, chemical engineering, civil engineering, electrical engineering, electronics, industrial engineering, instrumentation, internal combustion engines, mechanical…

The responsibilities of engineers.

PubMed

Smith, Justin; Gardoni, Paolo; Murphy, Colleen

2014-06-01

Knowledge of the responsibilities of engineers is the foundation for answering ethical questions about the work of engineers. This paper defines the responsibilities of engineers by considering what constitutes the nature of engineering as a particular form of activity. Specifically, this paper focuses on the ethical responsibilities of engineers qua engineers. Such responsibilities refer to the duties acquired in virtue of being a member of a group. We examine the practice of engineering, drawing on the idea of practices developed by philosopher Alasdair MacIntyre, and show how the idea of a practice is important for identifying and justifying the responsibilities of engineers. To demonstrate the contribution that knowledge of the responsibilities of engineers makes to engineering ethics, a case study from structural engineering is discussed. The discussion of the failure of the Sleipner A Platform off the coast of Norway in 1991 demonstrates how the responsibilities of engineers can be derived from knowledge of the nature of engineering and its context.

Globalization and Organizational Change: Engineers' Experiences and Their Implications for Engineering Education

ERIC Educational Resources Information Center

Lucena, Juan C.

2006-01-01

The demand for flexible engineers presents significant challenges to engineering education. Among these is the need for engineers to be prepared to understand and deal with organizational change. Yet engineering education and research on engineers have overlooked the impact of organizational change on engineering work. After outlining the impact…

Staged combustion with piston engine and turbine engine supercharger

DOEpatents

Fischer, Larry E [Los Gatos, CA; Anderson, Brian L [Lodi, CA; O'Brien, Kevin C [San Ramon, CA

2006-05-09

A combustion engine method and system provides increased fuel efficiency and reduces polluting exhaust emissions by burning fuel in a two-stage combustion system. Fuel is combusted in a piston engine in a first stage producing piston engine exhaust gases. Fuel contained in the piston engine exhaust gases is combusted in a second stage turbine engine. Turbine engine exhaust gases are used to supercharge the piston engine.

Staged combustion with piston engine and turbine engine supercharger

DOEpatents

Fischer, Larry E [Los Gatos, CA; Anderson, Brian L [Lodi, CA; O'Brien, Kevin C [San Ramon, CA

2011-11-01

A combustion engine method and system provides increased fuel efficiency and reduces polluting exhaust emissions by burning fuel in a two-stage combustion system. Fuel is combusted in a piston engine in a first stage producing piston engine exhaust gases. Fuel contained in the piston engine exhaust gases is combusted in a second stage turbine engine. Turbine engine exhaust gases are used to supercharge the piston engine.

Wave rotor demonstrator engine assessment

NASA Technical Reports Server (NTRS)

Snyder, Philip H.

1996-01-01

The objective of the program was to determine a wave rotor demonstrator engine concept using the Allison 250 series engine. The results of the NASA LERC wave rotor effort were used as a basis for the wave rotor design. A wave rotor topped gas turbine engine was identified which incorporates five basic requirements of a successful demonstrator engine. Predicted performance maps of the wave rotor cycle were used along with maps of existing gas turbine hardware in a design point study. The effects of wave rotor topping on the engine cycle and the subsequent need to rematch compressor and turbine sections in the topped engine were addressed. Comparison of performance of the resulting engine is made on the basis of wave rotor topped engine versus an appropriate baseline engine using common shaft compressor hardware. The topped engine design clearly demonstrates an impressive improvement in shaft horsepower (+11.4%) and SFC (-22%). Off design part power engine performance for the wave rotor topped engine was similarly improved including that at engine idle conditions. Operation of the engine at off design was closely examined with wave rotor operation at less than design burner outlet temperatures and rotor speeds. Challenges identified in the development of a demonstrator engine are discussed. A preliminary design was made of the demonstrator engine including wave rotor to engine transition ducts. Program cost and schedule for a wave rotor demonstrator engine fabrication and test program were developed.

Wave Engine Topping Cycle Assessment

NASA Technical Reports Server (NTRS)

Welch, Gerard E.

1996-01-01

The performance benefits derived by topping a gas turbine engine with a wave engine are assessed. The wave engine is a wave rotor that produces shaft power by exploiting gas dynamic energy exchange and flow turning. The wave engine is added to the baseline turboshaft engine while keeping high-pressure-turbine inlet conditions, compressor pressure ratio, engine mass flow rate, and cooling flow fractions fixed. Related work has focused on topping with pressure-exchangers (i.e., wave rotors that provide pressure gain with zero net shaft power output); however, more energy can be added to a wave-engine-topped cycle leading to greater engine specific-power-enhancement The energy addition occurs at a lower pressure in the wave-engine-topped cycle; thus the specific-fuel-consumption-enhancement effected by ideal wave engine topping is slightly lower than that effected by ideal pressure-exchanger topping. At a component level, however, flow turning affords the wave engine a degree-of-freedom relative to the pressure-exchanger that enables a more efficient match with the baseline engine. In some cases, therefore, the SFC-enhancement by wave engine topping is greater than that by pressure-exchanger topping. An ideal wave-rotor-characteristic is used to identify key wave engine design parameters and to contrast the wave engine and pressure-exchanger topping approaches. An aerodynamic design procedure is described in which wave engine design-point performance levels are computed using a one-dimensional wave rotor model. Wave engines using various wave cycles are considered including two-port cycles with on-rotor combustion (valved-combustors) and reverse-flow and through-flow four-port cycles with heat addition in conventional burners. A through-flow wave cycle design with symmetric blading is used to assess engine performance benefits. The wave-engine-topped turboshaft engine produces 16% more power than does a pressure-exchanger-topped engine under the specified topping constraints. Positive and negative aspects of wave engine topping in gas turbine engines are identified.

Problem Decomposition and Recomposition in Engineering Design: A Comparison of Design Behavior between Professional Engineers, Engineering Seniors, and Engineering Freshmen

ERIC Educational Resources Information Center

Song, Ting; Becker, Kurt; Gero, John; DeBerard, Scott; DeBerard, Oenardi; Reeve, Edward

2016-01-01

The authors investigated the differences in using problem decomposition and problem recomposition between dyads of engineering experts, engineering seniors, and engineering freshmen. Participants worked in dyads to complete an engineering design challenge within 1 hour. The entire design process was video and audio recorded. After the design…

Automotive Stirling Engine Mod 1 Design Review, Volume 1

NASA Technical Reports Server (NTRS)

1982-01-01

Risk assessment, safety analysis of the automotive stirling engine (ASE) mod I, design criteria and materials properties for the ASE mod I and reference engines, combustion are flower development, and the mod I engine starter motor are discussed. The stirling engine system, external heat system, hot engine system, cold engine system, and engine drive system are also discussed.

77 FR 42724 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... Nonroad Spark-Ignited Engines, New Nonroad Compression-Ignited Engines, and New On-Road Heavy Duty Engines... Compression-ignited Engines, and New On-road Heavy Duty Engines (Renewal). ICR numbers: EPA ICR No. 1852.05... engines, new nonroad compression-ignited engines, and new on- road heavy duty engines. Estimated Number of...

Civil engineering reference guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merritt, F.S.

1986-01-01

The civil engineering reference guide contains the following: Structural theory. Structural steel design. Concrete design and construction. Wood design and construction. Bridge engineering. Geotechnical engineering. Water engineering. Environmental engineering. Surveying.

Understanding the Role of Academic Language on Conceptual Understanding in an Introductory Materials Science and Engineering Course

NASA Astrophysics Data System (ADS)

Kelly, Jacquelyn

Students may use the technical engineering terms without knowing what these words mean. This creates a language barrier in engineering that influences student learning. Previous research has been conducted to characterize the difference between colloquial and scientific language. Since this research had not yet been applied explicitly to engineering, conclusions from the area of science education were used instead. Various researchers outlined strategies for helping students acquire scientific language. However, few examined and quantified the relationship it had on student learning. A systemic functional linguistics framework was adopted for this dissertation which is a framework that has not previously been used in engineering education research. This study investigated how engineering language proficiency influenced conceptual understanding of introductory materials science and engineering concepts. To answer the research questions about engineering language proficiency, a convenience sample of forty-one undergraduate students in an introductory materials science and engineering course was used. All data collected was integrated with the course. Measures included the Materials Concept Inventory, a written engineering design task, and group observations. Both systemic functional linguistics and mental models frameworks were utilized to interpret data and guide analysis. A series of regression analyses were conducted to determine if engineering language proficiency predicts group engineering term use, if conceptual understanding predicts group engineering term use, and if conceptual understanding predicts engineering language proficiency. Engineering academic language proficiency was found to be strongly linked to conceptual understanding in the context of introductory materials engineering courses. As the semester progressed, this relationship became even stronger. The more engineering concepts students are expected to learn, the more important it is that they are proficient in engineering language. However, exposure to engineering terms did not influence engineering language proficiency. These results stress the importance of engineering language proficiency for learning, but warn that simply exposing students to engineering terms does not promote engineering language proficiency.

Performance and driveline analyses of engine capacity in range extender engine hybrid vehicle

NASA Astrophysics Data System (ADS)

Praptijanto, Achmad; Santoso, Widodo Budi; Nur, Arifin; Wahono, Bambang; Putrasari, Yanuandri

2017-01-01

In this study, range extender engine designed should be able to meet the power needs of a power generator of hybrid electrical vehicle that has a minimum of 18 kW. Using this baseline model, the following range extenders will be compared between conventional SI piston engine (Baseline, BsL), engine capacity 1998 cm3, and efficiency-oriented SI piston with engine capacity 999 cm3 and 499 cm3 with 86 mm bore and stroke square gasoline engine in the performance, emission prediction of range extender engine, standard of charge by using engine and vehicle simulation software tools. In AVL Boost simulation software, range extender engine simulated from 1000 to 6000 rpm engine loads. The highest peak engine power brake reached up to 38 kW at 4500 rpm. On the other hand the highest torque achieved in 100 Nm at 3500 rpm. After that using AVL cruise simulation software, the model of range extended electric vehicle in series configuration with main components such as internal combustion engine, generator, electric motor, battery and the arthemis model rural road cycle was used to simulate the vehicle model. The simulation results show that engine with engine capacity 999 cm3 reported the economical performances of the engine and the emission and the control of engine cycle parameters.

40 CFR 1048.330 - May I sell engines from an engine family with a suspended certificate of conformity?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false May I sell engines from an engine... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.330 May I sell engines from an engine...

A Feasibility Study for Advanced Technology Integration for General Aviation.

DTIC Science & Technology

1980-05-01

154 4.5.9.4 Stratified Charge Reciprocating Engine ..... .. 155 4.5.9.5 Advanced Diesel Engine . ... 158 4.5.9.6 Liquid Cooling ... ........ 159... diesel , rotary combustion engine, advanced reciprocating engine concepts. (7) Powerplant control - integrated controls, microprocessor- based controls...Research Center Topics. (1) GATE (2) Positive displacement engines (a) Advanced reciprocating engines. (b) Alternative engine systems Diesel engines

Entropy-Based Performance Analysis of Jet Engines; Methodology and Application to a Generic Single-Spool Turbojet

NASA Astrophysics Data System (ADS)

Abbas, Mohammad

Recently developed methodology that provides the direct assessment of traditional thrust-based performance of aerospace vehicles in terms of entropy generation (i.e., exergy destruction) is modified for stand-alone jet engines. This methodology is applied to a specific single-spool turbojet engine configuration. A generic compressor performance map along with modeled engine component performance characterizations are utilized in order to provide comprehensive traditional engine performance results (engine thrust, mass capture, and RPM), for on and off-design engine operation. Details of exergy losses in engine components, across the entire engine, and in the engine wake are provided and the engine performance losses associated with their losses are discussed. Results are provided across the engine operating envelope as defined by operational ranges of flight Mach number, altitude, and fuel throttle setting. The exergy destruction that occurs in the engine wake is shown to be dominant with respect to other losses, including all exergy losses that occur inside the engine. Specifically, the ratio of the exergy destruction rate in the wake to the exergy destruction rate inside the engine itself ranges from 1 to 2.5 across the operational envelope of the modeled engine.

40 CFR 1065.401 - Test engine selection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CONTROLS ENGINE-TESTING PROCEDURES Engine Selection, Preparation, and Maintenance § 1065.401 Test engine selection. While all engine configurations within a certified engine family must comply with the applicable... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Test engine selection. 1065.401...

Enhancing Engineering Education through Engineering Management

ERIC Educational Resources Information Center

Pence, Kenneth R.; Rowe, Christopher J.

2012-01-01

Engineering Management courses are added to a traditional engineering curriculum to enhance the value of an undergraduate's engineering degree. A four-year engineering degree often leaves graduates lacking in business and management acumen. Engineering management education covers topics enhancing the value of new graduates by teaching management…

78 FR 12359 - Goodman Networks, Inc., Core Network Engineering (Deployment Engineering) Division Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

...., Core Network Engineering (Deployment Engineering) Division Including Workers in the Core Network Engineering (Deployment Engineering) Division in Alpharetta, GA, Hunt Valley, MD, Naperville, IL, and St... Reconsideration applicable to workers and former workers of Goodman Networks, Inc., Core Network Engineering...

40 CFR 1042.825 - Baseline determination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... a used engine to be the emission-data engine for the engine family for testing. Using good engineering judgment, select the engine configuration expected to represent the most common configuration in... adjust it differently, consistent with good engineering judgment. (d) Test the baseline engine four times...

40 CFR 1042.825 - Baseline determination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... a used engine to be the emission-data engine for the engine family for testing. Using good engineering judgment, select the engine configuration expected to represent the most common configuration in... adjust it differently, consistent with good engineering judgment. (d) Test the baseline engine four times...

40 CFR 1065.401 - Test engine selection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Test engine selection. 1065.401... CONTROLS ENGINE-TESTING PROCEDURES Engine Selection, Preparation, and Maintenance § 1065.401 Test engine selection. While all engine configurations within a certified engine family must comply with the applicable...

40 CFR 1065.401 - Test engine selection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Test engine selection. 1065.401... CONTROLS ENGINE-TESTING PROCEDURES Engine Selection, Preparation, and Maintenance § 1065.401 Test engine selection. While all engine configurations within a certified engine family must comply with the applicable...

40 CFR 1065.401 - Test engine selection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Test engine selection. 1065.401... CONTROLS ENGINE-TESTING PROCEDURES Engine Selection, Preparation, and Maintenance § 1065.401 Test engine selection. While all engine configurations within a certified engine family must comply with the applicable...

Multi-fuel rotary engine for general aviation aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, on advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed.

Virtual Collaborative Environments for System of Systems Engineering and Applications for ISAT

NASA Technical Reports Server (NTRS)

Dryer, David A.

2002-01-01

This paper describes an system of systems or metasystems approach and models developed to help prepare engineering organizations for distributed engineering environments. These changes in engineering enterprises include competition in increasingly global environments; new partnering opportunities caused by advances in information and communication technologies, and virtual collaboration issues associated with dispersed teams. To help address challenges and needs in this environment, a framework is proposed that can be customized and adapted for NASA to assist in improved engineering activities conducted in distributed, enhanced engineering environments. The approach is designed to prepare engineers for such distributed collaborative environments by learning and applying e-engineering methods and tools to a real-world engineering development scenario. The approach consists of two phases: an e-engineering basics phase and e-engineering application phase. The e-engineering basics phase addresses skills required for e-engineering. The e-engineering application phase applies these skills in a distributed collaborative environment to system development projects.

Analysis of a topping-cycle, aircraft, gas-turbine-engine system which uses cryogenic fuel

NASA Technical Reports Server (NTRS)

Turney, G. E.; Fishbach, L. H.

1984-01-01

A topping-cycle aircraft engine system which uses a cryogenic fuel was investigated. This system consists of a main turboshaft engine that is mechanically coupled (by cross-shafting) to a topping loop, which augments the shaft power output of the system. The thermodynamic performance of the topping-cycle engine was analyzed and compared with that of a reference (conventional) turboshaft engine. For the cycle operating conditions selected, the performance of the topping-cycle engine in terms of brake specific fuel consumption (bsfc) was determined to be about 12 percent better than that of the reference turboshaft engine. Engine weights were estimated for both the topping-cycle engine and the reference turboshaft engine. These estimates were based on a common shaft power output for each engine. Results indicate that the weight of the topping-cycle engine is comparable with that of the reference turboshaft engine.

Study of LH2-fueled topping cycle engine for aircraft propulsion

NASA Technical Reports Server (NTRS)

Turney, G. E.; Fishbach, L. H.

1983-01-01

An analytical investigation was made of a topping cycle aircraft engine system which uses a cryogenic fuel. This system consists of a main turboshaft engine which is mechanically coupled (by cross-shafting) to a topping loop which augments the shaft power output of the system. The thermodynamic performance of the topping cycle engine was analyzed and compared with that of a reference (conventional-type) turboshaft engine. For the cycle operating conditions selected, the performance of the topping cycle engine in terms of brake specific fuel consumption (bsfc) was determined to be about 12 percent better than that of the reference turboshaft engine. Engine weights were estimated for both the topping cycle engine and the reference turboshaft engine. These estimates were based on a common shaft power output for each engine. Results indicate that the weight of the topping cycle engine is comparable to that of the reference turboshaft engine.

Adjusting the specificity of an engine map based on the sensitivity of an engine control parameter relative to a performance variable

DOEpatents

Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

2014-10-28

Methods and systems for engine control optimization are provided. A first and a second operating condition of a vehicle engine are detected. An initial value is identified for a first and a second engine control parameter corresponding to a combination of the detected operating conditions according to a first and a second engine map look-up table. The initial values for the engine control parameters are adjusted based on a detected engine performance variable to cause the engine performance variable to approach a target value. A first and a second sensitivity of the engine performance variable are determined in response to changes in the engine control parameters. The first engine map look-up table is adjusted when the first sensitivity is greater than a threshold, and the second engine map look-up table is adjusted when the second sensitivity is greater than a threshold.

Performance and efficiency evaluation and heat release study of a direct-injection stratified-charge rotary engine

NASA Technical Reports Server (NTRS)

Nguyen, H. L.; Addy, H. E.; Bond, T. H.; Lee, C. M.; Chun, K. S.

1987-01-01

A computer simulation which models engine performance of the Direct Injection Stratified Charge (DISC) rotary engines was used to study the effect of variations in engine design and operating parameters on engine performance and efficiency of an Outboard Marine Corporation (OMC) experimental rotary combustion engine. Engine pressure data were used in a heat release analysis to study the effects of heat transfer, leakage, and crevice flows. Predicted engine data were compared with experimental test data over a range of engine speeds and loads. An examination of methods to improve the performance of the rotary engine using advanced heat engine concepts such as faster combustion, reduced leakage, and turbocharging is also presented.

Advanced General Aviation Turbine Engine (GATE) study

NASA Technical Reports Server (NTRS)

Smith, R.; Benstein, E. H.

1979-01-01

The small engine technology requirements suitable for general aviation service in the 1987 to 1988 time frame were defined. The market analysis showed potential United States engines sales of 31,500 per year providing that the turbine engine sales price approaches current reciprocating engine prices. An optimum engine design was prepared for four categories of fixed wing aircraft and for rotary wing applications. A common core approach was derived from the optimum engines that maximizes engine commonality over the power spectrum with a projected price competitive with reciprocating piston engines. The advanced technology features reduced engine cost, approximately 50 percent compared with current technology.

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2013 CFR

2013-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2012 CFR

2012-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2014 CFR

2014-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2011 CFR

2011-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

Be a Professional - Be Licensed! - Take the agricultural engineering professional engineering exam

USDA-ARS?s Scientific Manuscript database

Between October 2005 and October 2007, only 78 Agricultural Engineers took the professional engineering (PE) exam in the field of Agricultural Engineering, while the other 406 registered Agricultural Engineering Examinees took tests offer by other engineering disciplines. With the decline in partic...

Opportunities in Civil Engineering. [VGM Career Horizons Series].

ERIC Educational Resources Information Center

Hagerty, D. Joseph; Heer, John E., Jr.

This book presents information on career opportunities in civil engineering. Chapter 1 focuses on the scope of civil engineering, discussing: role of scientist, engineer, and technologists; engineering and engineering technology; civil engineer's role and obligations; and other information. Chapter 2 considers such aspects of the education for…

Federal Funding of Engineering Research and Development, 1980-1984.

ERIC Educational Resources Information Center

American Society of Mechanical Engineers, Washington, DC.

Data on the sources, amounts, and trends of federal funding for engineering research and development (R&D) are presented for 1980-1984. Narrative highlights are provided for: the total federal funding obligations for engineering R&D, mechanical engineering, astronautical engineering, aeronautical engineering, chemical engineering, civil…

Engine control techniques to account for fuel effects

DOEpatents

Kumar, Shankar; Frazier, Timothy R.; Stanton, Donald W.; Xu, Yi; Bunting, Bruce G.; Wolf, Leslie R.

2014-08-26

A technique for engine control to account for fuel effects including providing an internal combustion engine and a controller to regulate operation thereof, the engine being operable to combust a fuel to produce an exhaust gas; establishing a plurality of fuel property inputs; establishing a plurality of engine performance inputs; generating engine control information as a function of the fuel property inputs and the engine performance inputs; and accessing the engine control information with the controller to regulate at least one engine operating parameter.

Tibial and Femoral Tunnel Changes After ACL Reconstruction: A Prospective 2-Year Longitudinal MRI Study.

PubMed

Weber, Alexander E; Delos, Demetris; Oltean, Hanna N; Vadasdi, Katherine; Cavanaugh, John; Potter, Hollis G; Rodeo, Scott A

2015-05-01

Tunnel widening after anterior cruciate ligament reconstruction (ACL-R) is a well-accepted and frequent phenomenon, yet little is known regarding its origin or natural history. To prospectively evaluate the cross-sectional area (CSA) changes in tibial and femoral bone tunnels after ACL-R with serial MRI. Case series; Level of evidence, 4. Patients underwent arthroscopic ACL-R with the same surgeon, surgical technique, and rehabilitation protocol. Each patient underwent preoperative dual-energy x-ray absorptiometry and clinical evaluation, as well as postoperative time zero MRI followed by subsequent MRI and clinical examination, including functional and subjective outcome tests, at 6, 12, 24, 52, and 104 weeks. Tibial and femoral tunnel CSA was measured on each MRI at tunnel aperture (ttA and ftA), midsection (ttM and ftM), and exit (ttE and ftE). Logistic regression modeling was used to examine the predictive value of demographic data and preoperative bone quality (as measured by dual-energy x-ray absorptiometry) on functional outcome scores, manual and instrumented laxity measurements, and changes in tunnel area over time. Eighteen patients (including 12 men), mean age 35.5±8.7 years, underwent ACL-R. There was significant tunnel expansion at ttA and ftA sites 6 weeks postoperatively (P=.024 and .0045, respectively). Expansion continued for 24 weeks, with progressive tunnel narrowing thereafter. Average ttA CSA was significantly larger than ftA CSA at all times. The ttM significantly expanded after 6 weeks (P=.06); continued expansion to week 12 was followed by 21 months of reduction in tunnel diameter. The ftM and both ttE and ftE sites decreased in CSA over the 2 years. Median Lysholm and International Knee Documentation Committee scores significantly improved at final follow-up (P=.0083 and <.0001, respectively), and patients returned to preoperative activity levels. Pivot shift significantly decreased (P<.0001). Younger age (<30 years), male sex, and delayed ACL-R (>1 year from time of injury) predicted increased tunnel widening and accelerated expansion in CSA (P<.005). Tunnel expansion after ACL-R occurs early and primarily at the tunnel apertures. Expansion may not affect clinical outcome. Younger age, male sex, and delay from injury to ACL-R may be potential risks for enlargement. © 2015 The Author(s).

Synthetic devices for reconstructive surgery of the cruciate ligaments: a systematic review.

PubMed

Batty, Lachlan M; Norsworthy, Cameron J; Lash, Nicholas J; Wasiak, Jason; Richmond, Anneka K; Feller, Julian A

2015-05-01

The role of synthetic devices in the management of the cruciate ligament-injured knee remains controversial. The aim of this systematic review was to assess the safety and efficacy of synthetic devices in cruciate ligament surgery. A systematic review of the electronic databases Medline, Embase, and The Cochrane Library (issue 1, 2014) on January 13, 2014, was performed to identify controlled and uncontrolled trials. Trials that assessed the safety and efficacy of synthetic devices for cruciate ligament surgery were included. The main variables assessed included rates of failure, revision, and noninfective effusion and synovitis. Patient-reported outcome assessments and complications were also assessed where reported. From 511 records screened, we included 85 articles published between 1985 and 2013 reporting on 6 synthetic devices (ligament augmentation and reconstruction system [Ligament Augmentation and Reconstruction System (LARS; Surgical Implants and Devices, Arc-sur-Tille, France)]; Leeds-Keio [Xiros (formerly Neoligaments), Leeds, England]; Kennedy ligament augmentation device [3M, St Paul, MN]; Dacron [Stryker, Kalamazoo, MI]; Gore-Tex [W.L. Gore and Associates, Flagstaff, AZ]; and Trevira [Telos (limited liability company), Marburg, Germany]). The heterogeneity of the included studies precluded meta-analysis. The results were analyzed by device and then type of reconstruction (anterior cruciate ligament [ACL]/posterior cruciate ligament [PCL]/combined ACL and PCL). The lowest cumulative rates of failure were seen with the LARS device (2.6% for ACL and 1% for PCL surgery). The highest failure rate was seen in the Dacron ACL group (cumulative rate, 33.6%). Rates of noninfective synovitis and effusion ranged from 0.2% in the LARS ACL group to 27.6% in the Gore-Tex ACL group. Revision rates ranged from 2.6% (LARS) to 11.8% (Trevira-Hochfest; Telos). Recent designs, specifically the LARS, showed good improvement in the outcome scores. The mean preoperative and postoperative Lysholm knee scores were 54 and 88, respectively; the mean preoperative and postoperative Tegner activity scale scores were 3.3 and 6, respectively. Preliminary results for newer-generation devices, specifically the LARS, show lower reported rates of failure, revision, and sterile effusion/synovitis when compared with older devices. Level IV, systematic review of Level II through IV studies. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

A Systematic Review of the Outcomes of Posterolateral Corner Knee Injuries, Part 2: Surgical Treatment of Chronic Injuries.

PubMed

Moulton, Samuel G; Geeslin, Andrew G; LaPrade, Robert F

2016-06-01

There are a variety of reported surgical techniques outcomes of chronic grade III posterolateral corner (PLC) knee injuries. It is unknown if outcomes differ among the various surgical treatments. To systematically review the literature and report subjective and objective outcomes for surgical treatment strategies for chronic grade III PLC injuries to determine the optimal surgical technique. Systematic review; Level of evidence, 4. A systematic review of the literature including Cochrane, PubMed, Medline, and Embase was performed. The following search terms were used: posterolateral corner knee, posterolateral knee, posterolateral instability, multiligament knee, and knee dislocation. Inclusion criteria were outcome studies of surgical treatment for chronic PLC knee injuries with a minimum 2-year follow-up, subjective outcomes, objective outcomes including varus stability, and subgroup data on PLC injuries. Two investigators independently reviewed all abstracts. Accepted definitions of varus stability on examination or stress radiographs, and the need for revision surgery, were used to categorically define success and failure. Fifteen studies with a total of 456 patients were included in this study. The 15 studies included 5 with level 3 evidence and 10 with level 4 evidence. The mean age of the patients in each study ranged from 25.2 to 40 years, the reported mean time to surgery ranged from 5.5 to 52.8 months, and the mean follow-up duration ranged from 2 to 16.3 years. Mean postoperative Lysholm scores ranged from 65.5 to 91.8; mean postoperative International Knee Documentation Committee (IKDC) scores ranged from 62.6 to 86.0. Based on objective stability, there was an overall success rate of 90% and a 10% failure rate of PLC reconstruction. A variety of surgical techniques were reported. Chronic PLC injuries were reconstructed in all studies, and while techniques varied, the surgical management of chronic PLC injuries had a 90% success rate and a 10% failure rate according to the individual investigators' examination or stress radiographic assessment of objective outcomes. More than half of the 456 patients had a combined posterior cruciate ligament-PLC injury. Surgical techniques included variations of fibular slings, capsular shifts, and anatomic-based techniques (fibular tunnel and tibial tunnel). Further research is needed to determine the optimal surgical technique for treating chronic grade III PLC injuries. © 2015 The Author(s).

Double-Bundle Anterior Cruciate Ligament Reconstruction Using Hamstring Tendon Hybrid Grafts in Patients Over 40 Years of Age: Comparisons Between Different Age Groups.

PubMed

Nishio, Yusuke; Kondo, Eiji; Onodera, Jun; Onodera, Tomohiro; Yagi, Tomonori; Iwasaki, Norimasa; Yasuda, Kazunori

2018-05-01

Several recent studies have reported that favorable clinical results and a high level of patient satisfaction can generally be obtained with no increased risk of complications after single-bundle anterior cruciate ligament (ACL) reconstruction performed in patients >40 years of age. However, no studies have yet clarified the age-based differences in clinical outcomes after double-bundle reconstruction. To compare clinical outcomes after double-bundle ACL reconstruction using hamstring tendon hybrid grafts between patients in 2 different age groups: ≥40 years and <40 years. Cohort study; Level of evidence, 3. A retrospective study was conducted using 96 patients (48 men, 48 women ; mean age, 37 years) who underwent unilateral ACL reconstruction between 2008 and 2011. These patients were divided into 2 groups: group M included patients ≥40 years of age (n = 40 patients), and group Y included patients <40 years of age (n = 56 patients). All patients underwent the same anatomic double-bundle ACL reconstruction procedure. Clinical outcomes were evaluated at 2 years after surgery. Tunnel enlargement was also evaluated by computed digital radiography at 1 week and 2 years after surgery. Mean postoperative side-to-side differences in anterior laxity were 0.5 ± 1.9 mm and 1.2 ± 1.5 mm in groups M and Y, respectively; there was a significant difference between the 2 groups ( P = .039). There were no significant differences between the groups in Lysholm knee scores, International Knee Documentation Committee (IKDC) scores, or peak muscle torque of the hamstring. On the other hand, peak muscle torque of the quadriceps was significantly lower in group M (81%) than in group Y (89%) ( P = .025). With respect to femoral tunnel enlargement, the posterolateral tunnel in group M was significantly larger than that in group Y on anteroposterior and lateral radiographs ( P = .015 and P = .002, respectively). Equivalent clinical outcomes were seen between the 2 age groups after double-bundle ACL reconstruction. Postoperative anterior laxity was significantly less in older patients than in younger patients, however, older patients had significantly less quadriceps muscle strength than younger patients. Surgeons should be aware of residual muscle weakness and tunnel enlargement when performing double-bundle ACL reconstruction in older patients.

Extra-articular tenodesis combined with an anterior cruciate ligament reconstruction in acute anterior cruciate ligament tear in elite female football players.

PubMed

Guzzini, Matteo; Mazza, Daniele; Fabbri, Mattia; Lanzetti, Riccardo; Redler, Andrea; Iorio, Carlo; Monaco, Edoardo; Ferretti, Andrea

2016-10-01

The growing popularity of elite soccer among female participants has led to increased incidents of anterior cruciate ligament (ACL) ruptures. Many authors underline a positive glide after ACL reconstruction (ACLR), especially in women. In fact, an isolated intra-articular ACLR may be inadequate to control rotational instability after a combined injury of the ACL and the peripheral structures of the knee. Extra-articular procedures are sometimes used in primary cases displaying excessive antero-lateral rotatory instability. The purpose of this case series was to report subjective and objective outcomes after combined ACL and lateral extra-articular tenodesis (LET) with a minimum 4-year follow-up in a selected high-risk population of elite female football players. Between January 2007 and December 2010, 16 elite Italian female football players were included in the study. All patients underwent the same surgical technique: anatomical ACLR with autogenous semitendinosus and gracilis tendons. After the intra-articular reconstruction was performed, an additional extra-articular MacIntosh modified Coker-Arnold procedure was carried out. Patients were assessed pre- and post-operatively with the subjective and objective International Knee Documentation Committee (IKDC) evaluation form, Tegner activity scale (TAS) and Lysholm score. Joint laxity was assessed with KT-1000 by measuring the side-to-side (S/S) differences in displacement at manual maximum (mm) testing. At a mean follow-up of 72.6 ± 8.1 months, two independent examiners reviewed all players. All of the patients had a fully recovered range of motion. Lachman test was negative in all patients (100 %). The evaluation of joint laxity and clinical evaluation showed a statistically significant improvement. No patients experienced complication or a re-rupture. The rationale of combining extra-articular procedures with ACLR is to restrict the internal rotation of the reconstructed knee, taking advantage of its long lever arm and thus providing more stability in the rotational axis and preventing the ACL graft from undergoing further excessive strain. The combination of an LET with ACLR in elite female football players demonstrated excellent results in terms of subjective scales, post-operative residual laxity and re-rupture rate with no complication, and a complete return to sport activity.

Outcome reporting following navigated high tibial osteotomy of the knee: a systematic review.

PubMed

Yan, James; Musahl, Volker; Kay, Jeffrey; Khan, Moin; Simunovic, Nicole; Ayeni, Olufemi R

2016-11-01

This systematic review evaluates radiographic and clinical outcome reporting following navigated high tibial osteotomy (HTO). Conventional HTO was used as a control to compare outcomes and furthermore investigate the quality of evidence in studies reporting outcomes for navigated HTO. It was hypothesized that navigated HTO will show superior clinical and radiographic outcomes compared to conventional HTO. Two independent reviewers searched PubMed, Ovid (MEDLINE), EMBASE, and Cochrane databases for studies reporting outcomes following navigated HTO. Titles, abstracts, and full-text were screened in duplicate using an a priori inclusion and exclusion criteria. Descriptive statistics were calculated using Minitab ® statistical software. Methodological Index for Nonrandomized Studies (MINORS) and Cochrane Risk of Bias Scores were used to evaluate methodological quality. Thirty-four studies which involved 2216 HTOs were analysed in this review, 1608 (72.6 %) navigated HTOs and 608 (27.4 %) conventional HTOs. The majority of studies were of level IV evidence (16). Clinical outcomes were reported in knee and function scores or range of motion comparisons. Postoperative clinical and functional scores were improved by navigated HTO although it is not demonstrated if there is significant improvement compared to conventional HTO. Most common clinical outcome score reported was Lysholm scores (6) which report postoperative scores of 87.8 (standard deviation 5.9) and 88.8 (standard deviation 5.9) for conventional and navigation-assisted HTO, respectively. Radiographic outcomes reported commonly were weight-bearing mechanical axis, coronal plane angle, and posterior tibial slope angle in the sagittal plane. Studies have shown HTO gives significant correction of mechanical alignment and navigated HTO produces significantly less change in posterior tibial slope postoperatively compared to conventional. The mean MINORS for the 17 non-comparative studies was 9/16, and 15/24 for the 14 non-randomized comparative studies. Navigation HTO results in improved mechanical axis alignment and demonstrates significantly better control over the tibial slope angle change postoperatively compared to conventional methods; however, these improvements have not yet been reflected in clinical outcome scores. Overall the studies report HTO does create significantly improved knee scores and functions compared to patients' preoperative ratings regardless of technique. Future studies on HTO outcomes need to focus on consistency of outcome reporting. IV.

Biological knee reconstruction for combined malalignment, meniscal deficiency, and articular cartilage disease.

PubMed

Harris, Joshua D; Hussey, Kristen; Wilson, Hillary; Pilz, Kyle; Gupta, Anil K; Gomoll, Andreas; Cole, Brian J

2015-02-01

The aim of this study was to analyze patient-reported outcomes in those undergoing the triad of simultaneous osteotomy, meniscal transplantation, and articular cartilage repair. Patients undergoing simultaneous meniscal transplantation, distal femoral or proximal tibial osteotomy, and articular cartilage surgery by a single surgeon (B.J.C.) were analyzed. Meniscal transplantation was performed using bone-in-slot techniques. Distal femoral and high tibial osteotomies were performed for valgus and varus malalignment, respectively. Microfracture, autologous chondrocyte implantation, and osteochondral autograft or allograft were performed for articular cartilage disease. Validated patient-reported and surgeon-measured outcomes were collected. Preoperative and postoperative outcomes and medial versus lateral disease were compared using Student t tests. Eighteen participants (mean age, 34 ± 7.8 years; symptomatic patients, 7.4 ± 5.6 years; 2.4 ± 1.0 surgical procedures before study enrollment; mean follow-up, 6.5 ± 3.2 years) were analyzed. Two thirds of participants had medial compartment pathologic conditions and one third had lateral compartment pathologic processes. At final follow-up, there were statistically significant clinically meaningful improvements in International Knee Documentation Committee (IKDC) subjective classification, Lysholm score, and 4 Knee Injury and Osteoarthritis Outcome Score (KOOS) subscores. Postoperative 12-item short form (SF-12) physical and mental component scores were not significantly different from preoperative scores. The Kellgren-Lawrence classification grade was 1.5 ± 1.1 at 2.5 ± 3.0 years after surgery. There was a significantly higher preoperative SF-12 physical composite score (PCS) in participants with lateral compartment pathologic conditions (v medial compartment conditions) (P = .011). Although there were 13 reoperations in 10 patients (55.5% reoperation rate), only one patient was converted to knee arthroplasty (5.6%) and one to revision cartilage surgery and meniscal transplantation (5.6% revision rate). The most common complication was arthrofibrosis (16.7%). Statistically significant and clinically meaningful improvements in validated patient-reported clinical outcome scores at long-term follow-up were observed in 18 participants undergoing combined meniscal transplantation, osteotomy, and articular cartilage surgery. Although there was a low rate of cartilage or meniscal revision (or both) and total knee arthroplasty, there was a high rate of reoperation. There was no significant difference in outcomes between participants with medial versus lateral pathologic conditions. Level IV, therapeutic case series. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

[Electromagnetic navigation interlocking intramedullary nail technology for treatment of femoral shaft fractures].

PubMed

Zuo, Kangkang; Qin, Wei; Guo, Qing; Palati-Ababaikeli; Qiao, Peiliu; Shen, Mingquan; Yin, Lele; Pan, Qilin; Xu, Xiaoxiong

2014-10-01

To explore the value of electromagnetic navigation interlocking intramedullary nail in the treatment of femoral shaft fracture. Between July 2012 and October 2013, 53 cases of femoral shaft fracture were treated. There were 40 males and 13 females, aged 16-52 years (mean, 38.3 years). The causes of injury were traffic accident in 28 cases, falling from height in 11 cases, falling in 7 cases, crush injury in 4 cases, and other in 3 cases. Of 53 cases, there were 3 cases of open fracture (Gustilo I degree) and 50 cases of closed fracture. Fracture was located in the proximal femur in 17 cases, middle femur in 29 cases, and distal femur in 7 cases. According to Winquist classification, 7 cases were rated as type I, 8 cases as type II, 22 cases as type III, and 16 cases as type IV; according to AO classification, 18 cases were rated as type 32-A, 28 cases as type 32-B, and 7 cases as type 32-C. The time from injury to operation was 3-11 days (mean, 5 days). Distal interlocking intramedullary nail was implanted using electromagnetic navigation. The distal locking nail operation with interlocking intramedullary nail was successfully completed under electromagnetic navigation; the one-time success rate of distal locking nail operation reached 100%; and the locking nail time was 5.0-9.5 minutes (mean, 7.0 minutes). Healing of incision by first intention was obtained after operation, and no complication of skin necrosis, infection, and sinus tract occurred. Fifty-three cases were all followed up 5-12 months (mean, 9 months). One case had hip pain and weaken middle gluteal muscle strength, and the symptoms disappeared after removing the nail. During the follow-up period, no broken nails, nail exit, infection, or re-fracture occurred. All fractures achieved clinical healing, and the healing time was 8-22 weeks (mean, 14.5 weeks). In 49 patients followed up 8 months, the Lysholm score was excellent in 44 cases, good in 4 cases, and acceptable in 1 case, with an excellent and good rate of 98%. Electromagnetic navigation system is safe and reliable, with the advantages of high positioning accuracy, short operation time, and no radiation, the clinical application of the system for distal locking nail operation can obtain excellent short-term effectiveness.

Magnetic Resonance Imaging Findings in Symptomatic Patients After Arthroscopic Partial Meniscectomy for Torn Discoid Lateral Meniscus.

PubMed

Lee, Chang-Rack; Bin, Seong-Il; Kim, Jong-Min; Kim, Nam-Ki

2016-11-01

To evaluate the change in the thickness and width of the residual meniscus using magnetic resonance imaging (MRI) in patients who underwent arthroscopic partial meniscectomy for discoid lateral meniscus (DLM), to assess whether the degeneration of the articular cartilage in the lateral compartment of the knee progressed, and to evaluate clinical results. Among the patients who underwent arthroscopic partial meniscectomy for DLM between January 1997 and December 2011, those who were aged 40 or below at surgery were followed up for at least 3 years, and received at least 2 follow-up MRIs that were retrospectively reviewed. MRIs were done in symptomatic knees. Using MRI, the relative thickness and width were measured in the anterior horn, midportion, and posterior horn. To determine whether the degeneration of the lateral compartment would progress, the articular cartilage was graded based on the Outerbridge classification in MRIs. The clinical results were evaluated using the Lysholm score. A total of 20 patients (21 knees) were included. The average follow-up period was 6.8 years. In residual meniscus, the relative thickness of the midportion decreased from 9.0% ± 2.4% to 7.3% ± 2.3% (P < .001), the relative thickness of the anterior horn decreased from 15.6% ± 4.3% to 14.3% ± 6.7% (P = .030), and the relative thickness of the posterior horn decreased from 20.0% ± 4.4% to 16.7% ± 6.7% (P = .019). A decrease in the relative width was observed in the midportion (12.4% ± 4.8% to 10.9% ± 4.9%, P = .003). No significant changes in size were observed in the medial meniscus. A progression of degeneration in the lateral compartment was observed. However, the clinical results did not present significant changes. In symptomatic patients after arthroscopic partial meniscectomy for DLM, the thickness and width of the residual meniscus decreases over time. The arthritic change of the lateral compartment of the knee progressed. However, the change in the size of the residual meniscus was of unknown clinical significance. Level IV, therapeutic case series. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Validation study of an electronic method of condensed outcomes tools reporting in orthopaedics.

PubMed

Farr, Jack; Verma, Nikhil; Cole, Brian J

2013-12-01

Patient-reported outcomes (PRO) instruments are a vital source of data for evaluating the efficacy of medical treatments. Historically, outcomes instruments have been designed, validated, and implemented as paper-based questionnaires. The collection of paper-based outcomes information may result in patients becoming fatigued as they respond to redundant questions. This problem is exacerbated when multiple PRO measures are provided to a single patient. In addition, the management and analysis of data collected in paper format involves labor-intensive processes to score and render the data analyzable. Computer-based outcomes systems have the potential to mitigate these problems by reformatting multiple outcomes tools into a single, user-friendly tool.The study aimed to determine whether the electronic outcomes system presented produces results comparable with the test-retest correlations reported for the corresponding orthopedic paper-based outcomes instruments.The study is designed as a crossover study based on consecutive orthopaedic patients arriving at one of two designated orthopedic knee clinics.Patients were assigned to complete either a paper or a computer-administered questionnaire based on a similar set of questions (Knee injury and Osteoarthritis Outcome Score, International Knee Documentation Committee form, 36-Item Short Form survey, version 1, Lysholm Knee Scoring Scale). Each patient completed the same surveys using the other instrument, so that all patients had completed both paper and electronic versions. Correlations between the results from the two modes were studied and compared with test-retest data from the original validation studies.The original validation studies established test-retest reliability by computing correlation coefficients for two administrations of the paper instrument. Those correlation coefficients were all in the range of 0.7 to 0.9, which was deemed satisfactory. The present study computed correlation coefficients between the paper and electronic modes of administration. These correlation coefficients demonstrated similar results with an overall value of 0.86.On the basis of the correlation coefficients, the electronic application of commonly used knee outcome scores compare variably to the traditional paper variants with a high rate of test-retest correlation. This equivalence supports the use of the condensed electronic outcomes system and validates comparison of scores between electronic and paper modes. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

[Medial patellofemoral ligament reconstruction using quadriceps tendon].

PubMed

Lenschow, S; Herbort, M; Fink, C

2015-12-01

Stabilization of the patella by medial patellofemoral ligament (MPFL) reconstruction. Recurrent lateral patella instability with chronic weakening of the MPFL. Femoropatellar cartilage defects ICRS grade 3° or higher. Tuberositas Tibiae Trochlear Groove Index (TTTG) >20 mm. Lateral hypercompression of the patella without instability. A 3 cm transverse skin incision at the superomedial edge of the patella in 90° of flexion. Longitudinal incision of the prepatellar bursa and exposure of the quadriceps tendon. Preparation of a flat tendon strip with a length of 8 cm, a width of 10 mm, and a thickness of 3 mm, leaving the attachment at the patella intact. Flipping of the tendon strip and passing of the graft through a tunnel underneath the prepatellar tissue at the medial edge of the patella. Passing of the graft in layer two of the medial joint capsule just below the fascia (layer 1) and the vastus medialis. Fixation of the graft in a bone tunnel, drilled in the femoral insertion site of the native MPFL using a biodegradable interference screw. Patella centralizing brace for 4 weeks with range of motion (ROM) 0/0/90°, 20 kg of partial weight bearing for 3 weeks. Full weight-bearing according to pain starting from week 4 postoperatively. ROM up to 90° of flexion directly postoperatively. Free ROM starting from week 6 postoperatively. Stationary cycling 6 weeks postoperatively. Swimming and running after 10 months. Return to pivoting sports after 4-5 months. A total of 17 patients (7 men and 10 women; average age 21.5 years ±3.9 years, average BMI 22.6 ±3.9) were treated using this technique between March 2011 and November 2012. Only patients with at least one recurrent patella dislocation following conservative treatment were included. Patient satisfaction 12 months postoperatively was very high. Overall, 94.1 % would undergo the procedure again and 94.1 % were very satisfied with the cosmetic result. Significant improvement in Lysholm score 6, 12, and 24 months postoperatively (p < 0.05). Free ROM in 94.1 % of cases 12 months postoperatively. The Kujala score was reported to be 89 (±7.1) 12 months following surgery. No redislocation occurred during the 24 months following surgery.

Clinical Outcome Reporting in Youth ACL Literature Is Widely Variable

PubMed Central

Brusalis, Christopher M.; Lakomkin, Nikita; Suryavanshi, Joash R.; Cruz, Aristides I.; Green, Daniel W.; Jones, Kristofer J.; Fabricant, Peter D.

2017-01-01

Background: Advances in anterior cruciate ligament (ACL) reconstruction procedures in pediatric and adolescent patients have resulted in an increase in recent clinical studies on this topic. However, the consistency with which outcome measures are reported in this demographic is unknown. Purpose: To document outcome reporting patterns of youth ACL reconstruction studies in high-impact journals. Study Design: Systematic review; Level of evidence, 4. Methods: All articles published in 5 high-impact orthopaedic journals from 2010 to 2016 were reviewed to identify those reporting clinical outcomes of young patients who underwent ACL reconstruction. Studies that were nonclinical, reported on patients older than 18 years, or included fewer than 10 patients were excluded. Outcome measures used in all included studies were recorded. Results: Seventeen studies encompassing 772 subjects (mean age, 14.3 years; range, 6.3-18.0 years) were analyzed. Eight studies (47%) reported on Tanner stage of subjects, while 1 study reported skeletal age. Ten studies (59%) clearly documented the presence or absence of surgical complications. Range of motion was reported in 65% of studies. Leg-length discrepancy and angular deformity were each reported in 76% of studies, with 12% quantifying results through radiographic measurements. Ligament testing was variably defined by inclusion of instrumented testing (65%), Lachman test (53%), and pivot-shift test (53%). Fourteen studies (82%) explicitly reported on the rate of ACL rerupture, while 71% reported on the rate of revision surgery. Rate of return to preinjury activity was reported in 8 studies (47%), of which 2 defined criteria for return to sport and 3 defined the level of competitive sport. Patient-reported outcome measures (PROMs) were used variably. For the 3 most commonly reported PROMs (Lysholm, International Knee Documentation Committee, and Tegner), 24% of studies reported all 3 PROMs, 35% of studies reported 2 PROMs, and 6% of studies reported 1 PROM in isolation. A pediatric-specific PROM was reported in 1 of the 17 studies. Conclusion: Studies on pediatric ACL reconstruction published in high-impact journals unreliably defined subjects’ skeletal maturity, inconsistently reported on objective outcome measures, and used disparate adult-validated PROMs to assess subjective outcomes. These findings highlight the need for standardized, pediatric-specific outcome measures to be applied in future studies evaluating ACL reconstruction in children and adolescents. PMID:28840156

A novel aragonite-based scaffold for osteochondral regeneration: early experience on human implants and technical developments.

PubMed

Kon, Elizaveta; Robinson, Dror; Verdonk, Peter; Drobnic, Matej; Patrascu, Jenel Mariano; Dulic, Oliver; Gavrilovic, Gordon; Filardo, Giuseppe

2016-12-01

Chondral and osteochondral lesions represent a debilitating disease. Untreated lesions remain a risk factor for more extensive joint damage. The objective of this clinical study is to evaluate safety and early results of an aragonite-based scaffold used for osteochondral unit repair, by analysing both clinical outcome and MRI results, as well as the benefits of the procedure optimization through novel tapered shaped implants. A crystalline aragonite bi-phasic scaffold was implanted in patients affected by focal chondral-osteochondral knee lesions of the condyle and trochlea. Twenty-one patients (17 men, 4 women with a mean age of 31.0 ± 8.6 years) without severe OA received tapered shaped implants for the treatment of 2.5 ±1.7 cm 2 sized defects. The control group consisted of 76 patients selected according to the same criteria from a database of patients who previously underwent implantation of cylindrical-shaped implants. The clinical outcome of all patients was evaluated with the IKDC subjective score, the Lysholm score, and all 5 KOOS subscales administered preoperatively and at 6 and 12 months after surgery, while MRI evaluation was performed at the 12 month follow-up. A statistically significant improvement in all clinical scores was documented both in the tapered implants and the cylindrical group. No difference could be detected in the comparison between the improvement obtained with the two implant types, neither in the clinical nor in imaging evaluations. A difference could be detected instead in terms of revision rate, which was lower in the tapered implant group with no implant removal - 0% vs 8/76-10.5% failures in the cylindrical implants. This study highlighted both safety and potential of a novel aragonite-based scaffold for the treatment of chondral and osteochondral lesions in humans. A tapered shape relative to the cylindrical shaped implant design, improved the scaffold's safety profile. Tapered scaffolds maintain the clinical improvement observed in cylindrical implants while reducing the postoperative risk of revision surgery. This aragonite-based implant was associated with a significant clinical improvement at the 12 month follow-up. Moreover, MRI findings revealed graft integration with good bone and cartilage formation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Do Tibial Plateau Fractures Worsen Outcomes of Knee Ligament Injuries? A Matched Cohort Analysis

PubMed Central

Cinque, Mark E.; Godin, Jonathan A.; Moatshe, Gilbert; Chahla, Jorge; Kruckeberg, Bradley M.; Pogorzelski, Jonas; LaPrade, Robert F.

2017-01-01

Background: Tibial plateau fractures account for a small portion of all fractures; however, these fractures can pose a surgical challenge when occurring concomitantly with ligament injuries. Purpose/Hypothesis: The purpose of this study was to compare 2-year outcomes of soft tissue reconstruction with or without a concomitant tibial plateau fracture and open reduction internal fixation. We hypothesized that patients with a concomitant tibial plateau fracture at the time of soft tissue surgery would have inferior outcomes compared with patients without an associated tibial plateau fracture. Study Design: Cohort study; Level of evidence, 3. Methods: Forty patients were included in this study: 8 in the fracture group and 32 in the matched control group. Inclusion criteria for the fracture group included patients who were at least 18 years old at the time of surgery and sustained a tibial plateau fracture and a concomitant injury of the anterior cruciate ligament, posterior cruciate ligament, medial collateral ligament, or fibular collateral ligament in isolation or any combination of cruciate or collateral ligaments and who subsequently underwent isolated or combined ligament reconstruction. Patients were excluded if they underwent prior ipsilateral knee surgery, sustained additional bony injuries, or sustained an isolated extra-articular ligament injury at the time of injury. Each patient with a fracture was matched with 4 patients from a control group who had no evidence of a tibial plateau fracture but underwent the same soft tissue reconstruction procedure. Results: Patients in the fracture group improved significantly from preoperatively to postoperatively with respect to Short Form–12 (P < .05) and Western Ontario and McMaster Universities Osteoarthritis Index total scores (P < .05). The Lysholm (P = .075) and Tegner scores (P = .086) also improved, although this was not statistically significant. Patients in the control group improved significantly from preoperatively to postoperatively across all measured scores. A comparison of the postoperative results between the 2 groups showed no statistically significant difference. Conclusion: The presence of a tibial plateau fracture in conjunction with a ligamentous knee injury did not have a negative effect on postoperative patient-reported outcomes. Patient-reported outcome scores after surgery in both the fracture and control groups improved beyond the minimally clinically important difference, indicating that the presence of a fracture did not detract from the outcomes observed in patients without fractures undergoing concomitant ligament reconstruction. PMID:28840154

40 CFR 1042.101 - Exhaust emission standards for Category 1 engines and Category 2 engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from research engines or similar engine models that are already in production. Your demonstration must... Category 1 engines and Category 2 engines. 1042.101 Section 1042.101 Protection of Environment... MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.101...

14 CFR 33.84 - Engine overtorque test.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine overtorque test. 33.84 Section 33.84... STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.84 Engine overtorque test. (a) If approval of a maximum engine overtorque is sought for an engine incorporating a free power turbine...

40 CFR 1054.140 - What is my engine's maximum engine power and displacement?

Code of Federal Regulations, 2010 CFR

2010-07-01

... power and displacement? 1054.140 Section 1054.140 Protection of Environment ENVIRONMENTAL PROTECTION... engine power and displacement? This section describes how to quantify your engine's maximum engine power and displacement for the purposes of this part. (a) An engine configuration's maximum engine power is...

40 CFR 1054.140 - What is my engine's maximum engine power and displacement?

Code of Federal Regulations, 2011 CFR

2011-07-01

... power and displacement? 1054.140 Section 1054.140 Protection of Environment ENVIRONMENTAL PROTECTION... engine power and displacement? This section describes how to quantify your engine's maximum engine power and displacement for the purposes of this part. (a) An engine configuration's maximum engine power is...

40 CFR 1054.140 - What is my engine's maximum engine power and displacement?

Code of Federal Regulations, 2012 CFR

2012-07-01

... power and displacement? 1054.140 Section 1054.140 Protection of Environment ENVIRONMENTAL PROTECTION... engine power and displacement? This section describes how to quantify your engine's maximum engine power and displacement for the purposes of this part. (a) An engine configuration's maximum engine power is...

40 CFR 1054.140 - What is my engine's maximum engine power and displacement?

Code of Federal Regulations, 2014 CFR

2014-07-01

... power and displacement? 1054.140 Section 1054.140 Protection of Environment ENVIRONMENTAL PROTECTION... engine power and displacement? This section describes how to quantify your engine's maximum engine power and displacement for the purposes of this part. (a) An engine configuration's maximum engine power is...

40 CFR 1054.140 - What is my engine's maximum engine power and displacement?

Code of Federal Regulations, 2013 CFR

2013-07-01

... power and displacement? 1054.140 Section 1054.140 Protection of Environment ENVIRONMENTAL PROTECTION... engine power and displacement? This section describes how to quantify your engine's maximum engine power and displacement for the purposes of this part. (a) An engine configuration's maximum engine power is...

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

14 CFR 23.777 - Cockpit controls.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Identical powerplant controls for each engine must be located to prevent confusion as to the engines they...) operates the left engines(s) and the right control(s) operates the right engine(s). (2) On twin-engine airplanes with front and rear engine locations (tandem), the left powerplant controls must operate the front...

Remembering the Giants: Apollo Rocket Propulsion Development

NASA Technical Reports Server (NTRS)

Fisher, Steven C. (Editor); Rahman, Shamim A. (Editor)

2009-01-01

Topics discussed include: Rocketdyne - F-1 Saturn V First Stage Engine; Rocketdyne - J-2 Saturn V 2nd & 3rd Stage Engine; Rocketdyne - SE-7 & SE-8 Engines; Aerojet - AJ10-137 Apollo Service Module Engine; Aerojet - Attitude Control Engines; TRW - Lunar Descent Engine; and Rocketdyne - Lunar Ascent Engine.

78 FR 70216 - Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-25

... Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines AGENCY: Federal Aviation... all Thielert Aircraft Engines GmbH TAE 125-01 reciprocating engines. This AD requires applying sealant... directive (AD): 2013-24-06 Thielert Aircraft Engines GmbH: Amendment 39-17680; Docket No. FAA-2013-0561...

Comparison of China-US Engineering Ethics Educations in Sino-Western Philosophies of Technology.

PubMed

Cao, Gui Hong

2015-12-01

Ethics education has become essential in modern engineering. Ethics education in engineering has been increasingly implemented worldwide. It can improve ethical behaviors in technology and engineering design under the guidance of the philosophy of technology. Hence, this study aims to compare China-US engineering ethics education in Sino-Western philosophies of technology by using literature studies, online surveys, observational researches, textual analyses, and comparative methods. In my original theoretical framework and model of input and output for education, six primary variables emerge in the pedagogy: disciplinary statuses, educational goals, instructional contents, didactic models, teaching methods, and edificatory effects. I focus on the similarities and differences of engineering ethics educations between China and the U.S. in Chinese and Western philosophies of technology. In the field of engineering, the U.S. tends toward applied ethics training, whereas China inclines toward practical moral education. The U.S. is the leader, particularly in the amount of money invested and engineering results. China has quickened its pace, focusing specifically on engineering labor input and output. Engineering ethics is a multiplayer game effected at various levels among (a) lower level technicians and engineers, engineering associations, and stockholders; (b) middle ranking engineering ethics education, the ministry of education, the academy of engineering, and the philosophy of technology; and (c) top national and international technological policies. I propose that professional engineering ethics education can play many important roles in reforming engineering social responsibility by international cooperation in societies that are becoming increasingly reliant on engineered devices and systems. Significantly, my proposals contribute to improving engineering ethics education and better-solving engineering ethics issues, thereby maximizing engineering sustainability.

Engineers' Responsibilities for Global Electronic Waste: Exploring Engineering Student Writing Through a Care Ethics Lens.

PubMed

Campbell, Ryan C; Wilson, Denise

2017-04-01

This paper provides an empirically informed perspective on the notion of responsibility using an ethical framework that has received little attention in the engineering-related literature to date: ethics of care. In this work, we ground conceptual explorations of engineering responsibility in empirical findings from engineering student's writing on the human health and environmental impacts of "backyard" electronic waste recycling/disposal. Our findings, from a purposefully diverse sample of engineering students in an introductory electrical engineering course, indicate that most of these engineers of tomorrow associated engineers with responsibility for the electronic waste (e-waste) problem in some way. However, a number of responses suggested attempts to deflect responsibility away from engineers towards, for example, the government or the companies for whom engineers work. Still other students associated both engineers and non-engineers with responsibility, demonstrating the distributed/collective nature of responsibility that will be required to achieve a solution to the global problem of excessive e-waste. Building upon one element of a framework for care ethics adopted from the wider literature, these empirical findings are used to facilitate a preliminary, conceptual exploration of care-ethical responsibility within the context of engineering and e-waste recycling/disposal. The objective of this exploration is to provide a first step toward understanding how care-ethical responsibility applies to engineering. We also hope to seed dialogue within the engineering community about its ethical responsibilities on the issue. We conclude the paper with a discussion of its implications for engineering education and engineering ethics that suggests changes for educational policy and the practice of engineering.

Diving Deep: A Comparative Study of Educator Undergraduate and Graduate Backgrounds and Their Effect on Student Understanding of Engineering and Engineering Careers, Utilizing an Underwater Robotics Program

NASA Astrophysics Data System (ADS)

Scribner, J. Adam

Numerous studies have demonstrated that educators having degrees in their subjects significantly enhances student achievement, particularly in secondary mathematics and science (Chaney, 1995; Goe, 2007; Rowan, Chiang, & Miller, 1997; Wenglinsky, 2000). Yet, science teachers in states that adopt the Next Generation Science Standards will be facilitating classroom engineering activities despite the fact that few have backgrounds in engineering. This quantitative study analyzed ex-post facto WaterBotics (an innovative underwater robotics curriculum for middle and high school students) data to determine if educators having backgrounds in engineering (i.e., undergraduate and graduate degrees in engineering) positively affected student learning on two engineering outcomes: 1) the engineering design process, and 2) understanding of careers in engineering (who engineers are and what engineers do). The results indicated that educators having backgrounds in engineering did not significantly affect student understanding of the engineering design process or careers in engineering when compared to educators having backgrounds in science, mathematics, technology education, or other disciplines. There were, however, statistically significant differences between the groups of educators. Students of educators with backgrounds in technology education had the highest mean score on assessments pertaining to the engineering design process while students of educators with disciplines outside of STEM had the highest mean scores on instruments that assess for student understanding of careers in engineering. This might be due to the fact that educators who lack degrees in engineering but who teach engineering do a better job of "sticking to the script" of engineering curricula.

Structural engineering masters level education framework of knowledge for the needs of initial professional practice

NASA Astrophysics Data System (ADS)

Balogh, Zsuzsa Enriko

For at least the last decade, engineering, civil engineering, along with structural engineering as a profession within civil engineering, have and continue to face an emerging need for "Raising the Bar" of preparedness of young engineers seeking to become practicing professional engineers. The present consensus of the civil engineering profession is that the increasing need for broad and in-depth knowledge should require the young structural engineers to have at least a Masters-Level education. This study focuses on the Masters-Level preparedness in the structural engineering area within the civil engineering field. It follows much of the methodology used in the American Society of Civil Engineers (ASCE) Body of Knowledge determination for civil engineering and extends this type of study to better define the portion of the young engineers preparation beyond the undergraduate program for one specialty area of civil engineering. The objective of this research was to create a Framework of Knowledge for the young engineer which identifies and recognizes the needs of the profession, along with the profession's expectations of how those needs can be achieved in the graduate-level academic setting, in the practice environment, and through lifelong learning opportunities with an emphasis on the initial five years experience past completion of a Masters program in structural engineering. This study applied a modified Delphi method to obtain the critical information from members of the structural engineering profession. The results provide a Framework of Knowledge which will be useful to several groups seeking to better ensure the preparedness of the future young structural engineers at the Masters-Level.

21. Engine identified as a 'single cylinder vacuum assist engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Engine identified as a 'single cylinder vacuum assist engine for Tod tandem compound engine' showing compressor. - Carnegie Steel-Ohio Works, Steam Engines, 912 Salt Springs Road, Youngstown, Mahoning County, OH

Apparatus for sensor failure detection and correction in a gas turbine engine control system

NASA Technical Reports Server (NTRS)

Spang, H. A., III; Wanger, R. P. (Inventor)

1981-01-01

A gas turbine engine control system maintains a selected level of engine performance despite the failure or abnormal operation of one or more engine parameter sensors. The control system employs a continuously updated engine model which simulates engine performance and generates signals representing real time estimates of the engine parameter sensor signals. The estimate signals are transmitted to a control computational unit which utilizes them in lieu of the actual engine parameter sensor signals to control the operation of the engine. The estimate signals are also compared with the corresponding actual engine parameter sensor signals and the resulting difference signals are utilized to update the engine model. If a particular difference signal exceeds specific tolerance limits, the difference signal is inhibited from updating the model and a sensor failure indication is provided to the engine operator.

Key Future Engineering Capabilities for Human Capital Retention

NASA Astrophysics Data System (ADS)

Sivich, Lorrie

Projected record retirements of Baby Boomer generation engineers have been predicted to result in significant losses of mission-critical knowledge in space, national security, and future scientific ventures vital to high-technology corporations. No comprehensive review or analysis of engineering capabilities has been performed to identify threats related to the specific loss of mission-critical knowledge posed by the increasing retirement of tenured engineers. Archival data from a single diversified Fortune 500 aerospace manufacturing engineering company's engineering career database were analyzed to ascertain whether relationships linking future engineering capabilities, engineering disciplines, and years of engineering experience could be identified to define critical knowledge transfer models. Chi square, logistic, and linear regression analyses were used to map patterns of discipline-specific, mission-critical knowledge using archival data of engineers' perceptions of engineering capabilities, key developmental experiences, and knowledge learned from their engineering careers. The results from the study were used to document key engineering future capabilities. The results were then used to develop a proposed human capital retention plan to address specific key knowledge gaps of younger engineers as veteran engineers retire. The potential for social change from this study involves informing leaders of aerospace engineering corporations on how to build better quality mentoring or succession plans to fill the void of lost knowledge from retiring engineers. This plan can secure mission-critical knowledge for younger engineers for current and future product development and increased global competitiveness in the technology market.

A novel paradigm for engineering education: virtual internships with individualized mentoring and assessment of engineering thinking.

PubMed

Chesler, Naomi C; Ruis, A R; Collier, Wesley; Swiecki, Zachari; Arastoopour, Golnaz; Williamson Shaffer, David

2015-02-01

Engineering virtual internships are a novel paradigm for providing authentic engineering experiences in the first-year curriculum. They are both individualized and accommodate large numbers of students. As we describe in this report, this approach can (a) enable students to solve complex engineering problems in a mentored, collaborative environment; (b) allow educators to assess engineering thinking; and (c) provide an introductory experience that students enjoy and find valuable. Furthermore, engineering virtual internships have been shown to increase students'-and especially women's-interest in and motivation to pursue engineering degrees. When implemented in first-year engineering curricula more broadly, the potential impact of engineering virtual internships on the size and diversity of the engineering workforce could be dramatic.

20. Engine identified as a 'single cylinder vacuum assist engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Engine identified as a 'single cylinder vacuum assist engine for the Tod tandem compound engine' showing crank end. - Carnegie Steel-Ohio Works, Steam Engines, 912 Salt Springs Road, Youngstown, Mahoning County, OH

Biomedical Engineering | Classification | College of Engineering & Applied

Science.gov Websites

Engineering, Biomedical Engineering(414) 229-6614wjchang@uwm.eduEng & Math Sciences 1113 profile photo Malkoc, Ph.D.Visiting Assistant ProfessorBiomedical Engineering414-229-6919malkoc@uwm.eduEng & Math Engineering / Electrical Engineering(414) 229-3327misra@uwm.eduEng & Math Sciences E-314 profile photo

Students' Changing Images of Engineering and Engineers. Research Brief

ERIC Educational Resources Information Center

Jocuns, Andrew; Stevens, Reed; Garrison, Lari; Amos, Daniel

2008-01-01

This study analyzes the images of engineers and engineering that students construct over the course of their undergraduate engineering educations. Students in their first year of study to become engineers knew very little about the work they would be doing as an engineer and their expectations were more specific, hopeful, and high status than…

78 FR 22168 - Airworthiness Directives; International Aero Engines AG Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... Airworthiness Directives; International Aero Engines AG Turbofan Engines AGENCY: Federal Aviation Administration... International Aero Engines AG (IAE), V2525-D5 and V2528-D5 turbofan engines, with a certain No. 4 bearing... turbofan engines, serial numbers V20001 through V20285, with No. 4 bearing internal scavenge tube, part...

40 CFR 1042.101 - Exhaust emission standards for Category 1 engines and Category 2 engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... information equivalent to such in-use data, such as data from research engines or similar engine models that... Category 1 engines and Category 2 engines. 1042.101 Section 1042.101 Protection of Environment... MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.101...

40 CFR 1042.101 - Exhaust emission standards for Category 1 engines and Category 2 engines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... information equivalent to such in-use data, such as data from research engines or similar engine models that... Category 1 engines and Category 2 engines. 1042.101 Section 1042.101 Protection of Environment... MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.101...

40 CFR 1042.101 - Exhaust emission standards for Category 1 engines and Category 2 engines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... information equivalent to such in-use data, such as data from research engines or similar engine models that... Category 1 engines and Category 2 engines. 1042.101 Section 1042.101 Protection of Environment... MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.101...

76 FR 82110 - Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines AGENCY: Federal Aviation...) for Thielert Aircraft Engines GmbH models TAE 125-02-99 and TAE 125-01 reciprocating engines. That AD... flight hours to within 600 flight hours for TAE 125-01 reciprocating engines. This AD was prompted by the...

76 FR 40219 - Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-08

... Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine AGENCY... installed on a limited number of engines. No defective washers have been shipped as spare parts. This... consequent ignition failure, possibly resulting in damage to the engine, in- flight engine shutdown and...

40 CFR 1042.140 - Maximum engine power, displacement, power density, and maximum in-use engine speed.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Maximum engine power, displacement... Maximum engine power, displacement, power density, and maximum in-use engine speed. This section describes how to determine the maximum engine power, displacement, and power density of an engine for the...

40 CFR 1042.140 - Maximum engine power, displacement, power density, and maximum in-use engine speed.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Maximum engine power, displacement... Maximum engine power, displacement, power density, and maximum in-use engine speed. This section describes how to determine the maximum engine power, displacement, and power density of an engine for the...

Multi-fuel rotary engine for general aviation aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, an advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25,000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed. Previously announced in STAR as N83-18910

A Method for Search Engine Selection using Thesaurus for Selective Meta-Search Engine

NASA Astrophysics Data System (ADS)

Goto, Shoji; Ozono, Tadachika; Shintani, Toramatsu

In this paper, we propose a new method for selecting search engines on WWW for selective meta-search engine. In selective meta-search engine, a method is needed that would enable selecting appropriate search engines for users' queries. Most existing methods use statistical data such as document frequency. These methods may select inappropriate search engines if a query contains polysemous words. In this paper, we describe an search engine selection method based on thesaurus. In our method, a thesaurus is constructed from documents in a search engine and is used as a source description of the search engine. The form of a particular thesaurus depends on the documents used for its construction. Our method enables search engine selection by considering relationship between terms and overcomes the problems caused by polysemous words. Further, our method does not have a centralized broker maintaining data, such as document frequency for all search engines. As a result, it is easy to add a new search engine, and meta-search engines become more scalable with our method compared to other existing methods.

A simple method of calculating Stirling engines for engine design optimization

NASA Technical Reports Server (NTRS)

Martini, W. R.

1978-01-01

A calculation method is presented for a rhombic drive Stirling engine with a tubular heater and cooler and a screen type regenerator. Generally the equations presented describe power generation and consumption and heat losses. It is the simplest type of analysis that takes into account the conflicting requirements inherent in Stirling engine design. The method itemizes the power and heat losses for intelligent engine optimization. The results of engine analysis of the GPU-3 Stirling engine are compared with more complicated engine analysis and with engine measurements.

Stennis certifies final shuttle engine

NASA Image and Video Library

2008-10-22

Steam blasts out of the A-2 Test Stand at Stennis Space Center on Oct. 22 as engineers begin a certification test on engine 2061, the last space shuttle main flight engine scheduled to be built. Since 1975, Stennis has tested every space shuttle main engine used in the program - about 50 engines in all. Those engines have powered more than 120 shuttle missions - and no mission has failed as a result of engine malfunction. For the remainder of 2008 and throughout 2009, Stennis will continue testing of various space shuttle main engine components.

Orbit Transfer Vehicle (OTV) engine phase A study

NASA Technical Reports Server (NTRS)

Mellish, J. A.

1978-01-01

Requirements for the orbit transfer vehicle engine were examined. Engine performance/weight sensitivities, the effect of a service life of 300 start/shutdown cycles between overalls on the maximum engine operating pressure, and the sensitivity of the engine design point (i.e., thrust chamber pressure and nozzle area ratio) to the performance requirements specified are among the factors studied. Preliminary engine systems analyses were conducted on the stage combustion, expander, and gas generator engine cycles. Hydrogen and oxygen pump discharge pressure requirements are shown for various engine cycles. Performance of the engine cycles is compared.

Study of a LH2-fueled topping cycle engine for aircraft propulsion

NASA Technical Reports Server (NTRS)

Turney, G. E.; Fishbach, L. H.

1983-01-01

An analytical investigation was made of a topping cycle aircraft engine system which uses a cryogenic fuel. This system consists of a main turboshaft engine which is mechanically coupled (by cross-shafting) to a topping loop which augments the shaft power output of the system. The thermodynamic performance of the topping cycle engine was analyzed and compared with that of a reference (conventional-type) turboshaft engine. For the cycle operating conditions selected, the performance of the topping cycle engine in terms of brake specific fuel consumption (bsfc) was determined to be about 12 percent better than that of the reference turboshaft engine. Engine weights were estimated for both the topping cycle engine and the reference turboshaft engine. These estimates were based on a common shaft power output for each engine. Results indicate that the weight of the topping cycle engine is comparable to that of the reference turboshaft engine. Previously announced in STAR as N83-34942

Analysis of automobile engine cylinder pressure and rotation speed from engine body vibration signal

NASA Astrophysics Data System (ADS)

Wang, Yuhua; Cheng, Xiang; Tan, Haishu

2016-01-01

In order to improve the engine vibration signal process method for the engine cylinder pressure and engine revolution speed measurement instrument, the engine cylinder pressure varying with the engine working cycle process has been regarded as the main exciting force for the engine block forced vibration. The forced vibration caused by the engine cylinder pressure presents as a low frequency waveform which varies with the cylinder pressure synchronously and steadily in time domain and presents as low frequency high energy discrete humorous spectrum lines in frequency domain. The engine cylinder pressure and the rotation speed can been extract form the measured engine block vibration signal by low-pass filtering analysis in time domain or by FFT analysis in frequency domain, the low-pass filtering analysis in time domain is not only suitable for the engine in uniform revolution condition but also suitable for the engine in uneven revolution condition. That provides a practical and convenient way to design motor revolution rate and cylinder pressure measurement instrument.

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. As part of the NASA Technical Standards Program activities, engineering lessons learned datasets have been identified from a number of sources. These are being searched and screened for those having a relation to Technical Standards. This paper will address some of these Systems Engineering Lessons Learned and how they are being related to Technical Standards within the NASA Technical Standards Program, including linking to the Agency's Interactive Engineering Discipline Training Courses and the life cycle for a flight vehicle development program.

Evolving social responsibility understandings, motivations, and career goals of undergraduate students initially pursuing engineering degrees

NASA Astrophysics Data System (ADS)

Rulifson, Gregory A.

Engineers impact the lives of every person every day, and need to have a strong sense of social responsibility. Understanding what students think about social responsibility in engineering and their futures is very important. Further, by identifying influences that change these ideas and shape their conceptualizations, we can intervene to help prepare students for their responsibilities as part of the profession in the future. This thesis presents the experiences, in their own words, of 34 students who started in engineering. The study is composed of three parts: (i) engineering students' ideas about socially responsible engineering and what influenced these ideas, (ii) how students see themselves as future socially responsible engineers and how this idea changes over their first three years of college, and (iii) what social responsibility-related reasons students who leave engineering have for choosing a new major. Results show that students are complicated and have varied paths through and out of engineering studies. Students came up with their own ideas about socially responsible engineering that converged over the years on legal and safety related aspects of the profession. Relatedly, students identified with the engineering profession through internships and engineering courses, and rarely described socially responsible aspirations that could be accomplished with engineering. More often, those students who desired to help the disadvantaged through their engineering work left engineering. Their choice to leave was a combination of an unsupportive climate, disinterest in their classes, and a desire to combine their personal and professional social responsibility ambitions. If we want engineering students to push the engineering profession forward to be more socially responsible, we can identify the effective influences and develop a curriculum that encourages critical thinking about the social context and impacts of engineering. Additionally, a social responsibility-related curriculum could provide more opportunities for engagement that keeps those socially-motivated students in engineering. The engineering profession must also reflect these values to keep the new engineers working towards social responsibility and pushing the profession forward.

Annual Conference Abstracts

ERIC Educational Resources Information Center

Journal of Engineering Education, 1972

1972-01-01

Includes abstracts of papers presented at the 80th Annual Conference of the American Society for Engineering Education. The broad areas include aerospace, affiliate and associate member council, agricultural engineering, biomedical engineering, continuing engineering studies, chemical engineering, civil engineering, computers, cooperative…

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

Paired peer learning through engineering education outreach

NASA Astrophysics Data System (ADS)

Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

2017-01-01

Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

GENENG 2: A program for calculating design and off-design performance of two- and three-spool turbofans with as many as three nozzles

NASA Technical Reports Server (NTRS)

Fishbach, L. H.; Koenig, R. W.

1972-01-01

A computer program which calculates steady-state design and off-design jet engine performance for two- or three-spool turbofans with one, two, or three nozzles is described. Included in the report are complete FORTRAN 4 listings of the program with sample results for nine basic turbofan engines that can be calculated: (1) three-spool, three-stream engine; (2) two-spool, three-stream, boosted-fan engine; (3) two-spool, three-stream, supercharged-compressor engine; (4) three-spool, two-stream engine; (5) two-spool, two-stream engine; (6) three-spool, three-stream, aft-fan engine; (7) two-spool, three-stream, aft-fan engine; (8) two-spool, two-stream, aft-engine; and (9) three-spool, two-stream, aft-fan engine. The simulation of other engines by using logical variables built into the program is also described.

Ecosystem engineering effects on species diversity across ecosystems: a meta-analysis.

PubMed

Romero, Gustavo Q; Gonçalves-Souza, Thiago; Vieira, Camila; Koricheva, Julia

2015-08-01

Ecosystem engineering is increasingly recognized as a relevant ecological driver of diversity and community composition. Although engineering impacts on the biota can vary from negative to positive, and from trivial to enormous, patterns and causes of variation in the magnitude of engineering effects across ecosystems and engineer types remain largely unknown. To elucidate the above patterns, we conducted a meta-analysis of 122 studies which explored effects of animal ecosystem engineers on species richness of other organisms in the community. The analysis revealed that the overall effect of ecosystem engineers on diversity is positive and corresponds to a 25% increase in species richness, indicating that ecosystem engineering is a facilitative process globally. Engineering effects were stronger in the tropics than at higher latitudes, likely because new or modified habitats provided by engineers in the tropics may help minimize competition and predation pressures on resident species. Within aquatic environments, engineering impacts were stronger in marine ecosystems (rocky shores) than in streams. In terrestrial ecosystems, engineers displayed stronger positive effects in arid environments (e.g. deserts). Ecosystem engineers that create new habitats or microhabitats had stronger effects than those that modify habitats or cause bioturbation. Invertebrate engineers and those with lower engineering persistence (<1 year) affected species richness more than vertebrate engineers which persisted for >1 year. Invertebrate species richness was particularly responsive to engineering impacts. This study is the first attempt to build an integrative framework of engineering effects on species diversity; it highlights the importance of considering latitude, habitat, engineering functional group, taxon and persistence of their effects in future theoretical and empirical studies. © 2014 The Authors. Biological Reviews © 2014 Cambridge Philosophical Society.

Green engineering education through a U.S. EPA/academia collaboration.

PubMed

Shonnard, David R; Allen, David T; Nguyen, Nhan; Austin, Sharon Weil; Hesketh, Robert

2003-12-01

The need to use resources efficiently and reduce environmental impacts of industrial products and processes is becoming increasingly important in engineering design; therefore, green engineering principles are gaining prominence within engineering education. This paper describes a general framework for incorporating green engineering design principles into engineering curricula, with specific examples for chemical engineering. The framework for teaching green engineering discussed in this paper mirrors the 12 Principles of Green Engineering proposed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A), especially in methods for estimating the hazardous nature of chemicals, strategies for pollution prevention, and approaches leading to efficient energy and material utilization. The key elements in green engineering education, which enlarge the "box" for engineering design, are environmental literacy, environmentally conscious design, and beyond-the-plant boundary considerations.

Fuel quantity modulation in pilot ignited engines

DOEpatents

May, Andrew

2006-05-16

An engine system includes a first fuel regulator adapted to control an amount of a first fuel supplied to the engine, a second fuel regulator adapted to control an amount of a second fuel supplied to the engine concurrently with the first fuel being supplied to the engine, and a controller coupled to at least the second fuel regulator. The controller is adapted to determine the amount of the second fuel supplied to the engine in a relationship to the amount of the first fuel supplied to the engine to operate in igniting the first fuel at a specified time in steady state engine operation and adapted to determine the amount of the second fuel supplied to the engine in a manner different from the relationship at steady state engine operation in transient engine operation.

Quiet engine program flight engine design study

NASA Technical Reports Server (NTRS)

Klapproth, J. F.; Neitzel, R. E.; Seeley, C. T.

1974-01-01

The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

The Engineer of 2020: Visions of Engineering in the New Century

ERIC Educational Resources Information Center

National Academies Press, 2004

2004-01-01

To enhance the nation's economic productivity and improve the quality of life worldwide, engineering education in the United States must anticipate and adapt to the dramatic changes of engineering practice. The Engineer of 2020 urges the engineering profession to recognize what engineers can build for the future through a wide range of leadership…

Software engineering as an engineering discipline

NASA Technical Reports Server (NTRS)

Berard, Edward V.

1988-01-01

The following topics are discussed in the context of software engineering: early use of the term; the 1968 NATO conference; Barry Boehm's definition; four requirements fo software engineering; and additional criteria for software engineering. Additionally, the four major requirements for software engineering--computer science, mathematics, engineering disciplines, and excellent communication skills--are discussed. The presentation is given in vugraph form.

78 FR 1776 - Airworthiness Directives; International Aero Engines AG Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-09

... Engines AG Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Aero Engines AG (IAE), V2525-D5 and V2528-D5 turbofan engines, with a certain number (No.) 4 bearing... proposed AD. Discussion We received a report of a fire warning on an IAE V2525 turbofan engine shortly...

I "Still" Wanna Be an Engineer! Women, Education and the Engineering Profession

ERIC Educational Resources Information Center

Gill, Judith; Sharp, Rhonda; Mills, Julie; Franzway, Suzanne

2008-01-01

Women's low enrolment in post-school engineering degrees continues to be a problem for engineering faculties and the profession generally. A qualitative interview-based study of Australian women engineers across the range of engineering disciplines showed the relevance of success in math and science at school to their enrolling in engineering at…

40 CFR 1042.310 - Engine selection for Category 1 and Category 2 engines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Category 2 engines. (a) Determine minimum sample sizes as follows: (1) For Category 1 engines, the minimum sample size is one engine or one percent of the projected U.S.-directed production volume for all your Category 1 engine families, whichever is greater. (2) For Category 2 engines, the minimum sample size is...

76 FR 56637 - Airworthiness Directives; Lycoming Engines Model IO-720-A1B Reciprocating Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

... Airworthiness Directives; Lycoming Engines Model IO-720-A1B Reciprocating Engines AGENCY: Federal Aviation... directive (AD) for certain model IO-720-A1B Lycoming Engines reciprocating engines. This AD requires a... crankshaft due to incorrect parts installed. We are issuing this AD to prevent engine crankshaft failure and...

14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer certificate issued on basis of a foreign flight engineer license. 63.42 Section 63.42 Aeronautics and Space FEDERAL AVIATION... PILOTS Flight Engineers § 63.42 Flight engineer certificate issued on basis of a foreign flight engineer...

Engineering Encounters: Teaching Educators about Engineering

ERIC Educational Resources Information Center

Tank, Kristina M.; Raman, D. Raj; Lamm, Monica H.; Sundararajan, Sriram; Estapa, Anne

2017-01-01

This column presents ideas and techniques to enhance science teaching. This month's issue describes preservice elementary teachers learning engineering principles from engineers. Few elementary teachers have experience with implementing engineering into the classroom. While engineering professional development opportunities for inservice teachers…

46 CFR 10.109 - Classification of endorsements.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Professional nurse; (41) Marine physician assistant; (42) Hospital corpsman; and (43) Radar observer. (b) The... engineer (limited-near-coastal); (22) First assistant engineer; (23) Second assistant engineer; (24) Third assistant engineer; (25) Assistant engineer (limited); (26) Designated duty engineer (DDE); (27) Chief...

46 CFR 70.20-1 - Marine engineering details.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false Marine engineering details. 70.20-1 Section 70.20-1... General Marine Engineering Requirements § 70.20-1 Marine engineering details. All marine engineering... subchapter F (Marine Engineering) of this chapter. ...

46 CFR 70.20-1 - Marine engineering details.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false Marine engineering details. 70.20-1 Section 70.20-1... General Marine Engineering Requirements § 70.20-1 Marine engineering details. All marine engineering... subchapter F (Marine Engineering) of this chapter. ...

46 CFR 70.20-1 - Marine engineering details.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false Marine engineering details. 70.20-1 Section 70.20-1... General Marine Engineering Requirements § 70.20-1 Marine engineering details. All marine engineering... subchapter F (Marine Engineering) of this chapter. ...

46 CFR 70.20-1 - Marine engineering details.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Marine engineering details. 70.20-1 Section 70.20-1... General Marine Engineering Requirements § 70.20-1 Marine engineering details. All marine engineering... subchapter F (Marine Engineering) of this chapter. ...

46 CFR 70.20-1 - Marine engineering details.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Marine engineering details. 70.20-1 Section 70.20-1... General Marine Engineering Requirements § 70.20-1 Marine engineering details. All marine engineering... subchapter F (Marine Engineering) of this chapter. ...

Space engine safety system

NASA Technical Reports Server (NTRS)

Maul, William A.; Meyer, Claudia M.

1991-01-01

A rocket engine safety system was designed to initiate control procedures to minimize damage to the engine or vehicle or test stand in the event of an engine failure. The features and the implementation issues associated with rocket engine safety systems are discussed, as well as the specific concerns of safety systems applied to a space-based engine and long duration space missions. Examples of safety system features and architectures are given, based on recent safety monitoring investigations conducted for the Space Shuttle Main Engine and for future liquid rocket engines. Also, the general design and implementation process for rocket engine safety systems is presented.

PROFESSIONAL REGISTRATION OF GOVERNMENT ENGINEERS.

USGS Publications Warehouse

Buchanan, Thomas J.

1985-01-01

The American Society of Civil Engineers views professional registration as an appropriate requirement for engineers, including those in government. The National Society of Professional Engineers makes registration a requirement for the grade of member and full privileges in the society. Some Federal agencies require engineering registration for certain positions in their agencies. Engineers in government service should consider the value of engineering registration to themselves and to their agencies and take pride in their professions and in their own capabilities by becoming registered engineers. They should also take steps to encourage their agencies to give more attention to engineering registration.

Conversion of a micro, glow-ignition, two-stroke engine from nitromethane-methanol blend fuel to military jet propellant (JP-8)

NASA Astrophysics Data System (ADS)

Wiegand, Andrew L.

The goal of the thesis "Conversion of a Micro, Glow-Ignition, Two-Stroke Engine from Nitromethane-Methanol Blend Fuel to Military Jet Propellant (JP-8)" was to demonstrate the ability to operate a small engine on JP-8 and was completed in two phases. The first phase included choosing, developing a test stand for, and baseline testing a nitromethane-methanol-fueled engine. The chosen engine was an 11.5 cc, glow-ignition, two-stroke engine designed for remote-controlled helicopters. A micro engine test stand was developed to load and motor the engine. Instrumentation specific to the low flow rates and high speeds of the micro engine was developed and used to document engine behavior. The second phase included converting the engine to operate on JP-8, completing JP-8-fueled steady-state testing, and comparing the performance of the JP-8-fueled engine to the nitromethane-methanol-fueled engine. The conversion was accomplished through a novel crankcase heating method; by heating the crankcase for an extended period of time, a flammable fuel-air mixture was generated in the crankcase scavenged engine, which greatly improved starting times. To aid in starting and steady-state operation, yttrium-zirconia impregnated resin (i.e. ceramic coating) was applied to the combustion surfaces. This also improved the starting times of the JP-8-fueled engine and ultimately allowed for a 34-second starting time. Finally, the steady-state data from both the nitromethane-methanol and JP-8-fueled micro engine were compared. The JP-8-fueled engine showed signs of increased engine friction while having higher indicated fuel conversion efficiency and a higher overall system efficiency. The minimal ability of JP-8 to cool the engine via evaporative effects, however, created the necessity of increased cooling air flow. The conclusion reached was that JP-8-fueled micro engines could be viable in application, but not without additional research being conducted on combustion phenomenon and cooling requirements.

40 CFR 1048.325 - What happens if an engine family fails the production-line testing requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false What happens if an engine family fails... SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.325 What happens if an engine family fails... engine family if it fails under § 1048.315. The suspension may apply to all facilities producing engines...

40 CFR 1048.325 - What happens if an engine family fails the production-line testing requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What happens if an engine family fails... SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.325 What happens if an engine family fails... engine family if it fails under § 1048.315. The suspension may apply to all facilities producing engines...

Impact of an Engineering Case Study in a High School Pre-Engineering Course

ERIC Educational Resources Information Center

Rutz, Eugene; Shafer, Michelle

2011-01-01

Students at an all-girls high school who were enrolled in an introduction to engineering course were presented an engineering case study to determine if the case study affected their attitudes toward engineering and their abilities to solve engineering problems. A case study on power plants was implemented during a unit on electrical engineering.…

40 CFR 1045.330 - May I sell engines from an engine family with a suspended certificate of conformity?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false May I sell engines from an engine... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Testing Production-line Engines § 1045.330 May I sell engines from an...

Motivational Factors of Professional Engineers and Non-Professional Engineers in Applying for License as Professional Engineer: A Comparative Study

ERIC Educational Resources Information Center

Khamis, Nor Kamaliana; Harun, Zambri; Tahir, Mohd Faizal Mat; Wahid, Zaliha; Sabri, Mohd Anas Mohd

2013-01-01

All engineering faculties in Malaysia are required to have at least three academics who have engineering competency for each program. Having an engineering competency means academics has obtained the compulsory endorsements from the Boards of Engineers, Malaysia, BEM. Upon approval, academics seeking such competency could carry the suffix Ir. to…

75 FR 39803 - Airworthiness Directives; Thielert Aircraft Engines GmbH Model TAE 125-01 Reciprocating Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-13

... Airworthiness Directives; Thielert Aircraft Engines GmbH Model TAE 125-01 Reciprocating Engines AGENCY: Federal...-18300R5, may cause a blow-by gas pressure increase inside the crankcase of the engine in excess of the oil seal design pressure limits. Leaking engine oil may adversely affect the gearbox clutch or the engine...

40 CFR 1048.325 - What happens if an engine family fails the production-line testing requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... steps you must take to remedy the cause of the engine family's production-line failure. All the engines... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What happens if an engine family fails... SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.325 What happens if an engine family fails...

40 CFR 1045.325 - What happens if an engine family fails the production-line testing requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... steps you must take to remedy the cause of the engine family's production-line failure. All the engines... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What happens if an engine family fails... PROPULSION MARINE ENGINES AND VESSELS Testing Production-line Engines § 1045.325 What happens if an engine...

Engineering Design Handbook. Helicopter Engineering. Part One. Preliminary Design

DTIC Science & Technology

1974-08-30

1.3 ENGINE REPLACEMENT .............. ......................... 8-1 8-1.4 ENGINE AIR INDUCTION SYSTEM .............................. 8-2 8-1.5 ENGINE ...8-5 8-2.2 ENGINE AIR INDUCTION SYSTEM .............................. 8-5 8-2.2.1 G eneral Design...8-5 8-2.2.2 Air Induction System Inlet Location ............................... 8-6 8-2.2.3 Engine Air Induction System Pressure Losses

Engineering the future with America's high school students

NASA Technical Reports Server (NTRS)

Farrance, M. A.; Jenner, J. W.

1993-01-01

The number of students enrolled in engineering is declining while the need for engineers is increasing. One contributing factor is that most high school students have little or no knowledge about what engineering is, or what engineers do. To teach young students about engineering, engineers need good tools. This paper presents a course of study developed and used by the authors in a junior college course for high school students. Students learned about engineering through independent student projects, in-class problem solving, and use of career information resources. Selected activities from the course can be adapted to teach students about engineering in other settings. Among the most successful techniques were the student research paper assignments, working out a solution to an engineering problem as a class exercise, and the use of technical materials to illustrate engineering concepts and demonstrate 'tools of the trade'.

Orbit transfer vehicle engine study, phase A extension. Volume 2A: Study results

NASA Technical Reports Server (NTRS)

1980-01-01

Engine trade studies and systems analyses leading to a baseline engine selection for advanced expander cycle engine are discussed with emphasis on: (1) performance optimization of advanced expander cycle engines in the 10 to 20K pound thrust range; (2) selection of a recommended advanced expander engine configuration based on maximized performance and minimized mission risk, and definition of the components for this configuration; (3) characterization of the low thrust adaptation requirements and performance for the staged combustion engine; (4) generation of a suggested safety and reliability approach for OTV engines independent of engine cycle; (5) definition of program risk relationships between expander and staged combustion cycle engines; and (6) development of schedules and costs for the DDT&E, production, and operation phases of the 10K pound thrust expander engine program.

40 CFR 1042.230 - Engine families.

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree). (19) The type of smoke control system. (d) For Category 3 engines, group engines into engine....230 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine...

40 CFR 1042.230 - Engine families.

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree). (19) The type of smoke control system. (d) For Category 3 engines, group engines into engine....230 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine...

40 CFR 1042.230 - Engine families.

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree). (19) The type of smoke control system. (d) For Category 3 engines, group engines into engine....230 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine...

40 CFR 1042.230 - Engine families.

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree). (19) The type of smoke control system. (d) For Category 3 engines, group engines into engine....230 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Certifying Engine...

40 CFR 1036.230 - Selecting engine families.

Code of Federal Regulations, 2014 CFR

2014-07-01

... CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE HEAVY-DUTY HIGHWAY ENGINES Certifying Engine Families... sold into non-vocational tractor applications. You may assign the numbers and configurations of engines...). (d) Engine configurations within an engine family must use equivalent greenhouse gas emission...

40 CFR 1036.230 - Selecting engine families.

Code of Federal Regulations, 2012 CFR

2012-07-01

... CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE HEAVY-DUTY HIGHWAY ENGINES Certifying Engine Families... sold into non-vocational tractor applications. You may assign the numbers and configurations of engines...). (d) Engine configurations within an engine family must use equivalent greenhouse gas emission...

The Nutating Engine-Prototype Engine Progress Report and Test Results

NASA Technical Reports Server (NTRS)

Meitner, Peter L.; Boruta, Mike

2006-01-01

A prototype of a new, internal combustion (IC) engine concept has been completed. The Nutating Engine features an internal disk nutating (wobbling) on a Z-shaped power shaft. The engine is exceedingly compact, and several times more power dense than any conventional (reciprocating or rotary) IC engine. This paper discusses lessons learned during the prototype engine's development and provides details of its construction. In addition, results of the initial performance tests of the various components, as well as the complete engine, are summarized.

Engine dynamic analysis with general nonlinear finite element codes

NASA Technical Reports Server (NTRS)

Adams, M. L.; Padovan, J.; Fertis, D. G.

1991-01-01

A general engine dynamic analysis as a standard design study computational tool is described for the prediction and understanding of complex engine dynamic behavior. Improved definition of engine dynamic response provides valuable information and insights leading to reduced maintenance and overhaul costs on existing engine configurations. Application of advanced engine dynamic simulation methods provides a considerable cost reduction in the development of new engine designs by eliminating some of the trial and error process done with engine hardware development.

14. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW HIGHLIGHTS THE CRANK AND 24' DIAMETER FLYWHEEL. THE ENGINE IS A 7,940 HP MESTA-CORLISS CROSS-COMPOUND STEAM ENGINE ITS BORE AND STROKE ARE 32"X84"X60". NOTE FLY BALL GOVERNOR ON ENGINE. MILL DRIVE SHAFT ATTACHED TO PULLEY ON LOCATED ON CRANK. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Study of Bird Ingestions into Small Inlet Area Aircraft Turbine Engines

DTIC Science & Technology

1990-12-01

engines (ALF502, TFE731 , TPE331, and JTI5D) included in the study. This includes 24 months of operations for the first three engines and 12 months of...through the National Teclical Bird Ingestion- TFE731 Information Service, Springfield, 4 Tuibine Engine,’ TPt331 Virginia 22161 Turbofan Engine...ALF502 Engine 7 2.2 Operations, TFE731 Engine 8 2.3 Operations, TPE331 Engine 9 3.1 Distribution of Bird Weights 13 3.2 Aircraft Ingestions by Month

Qualitative and temporal reasoning in engine behavior analysis

NASA Technical Reports Server (NTRS)

Dietz, W. E.; Stamps, M. E.; Ali, M.

1987-01-01

Numerical simulation models, engine experts, and experimental data are used to generate qualitative and temporal representations of abnormal engine behavior. Engine parameters monitored during operation are used to generate qualitative and temporal representations of actual engine behavior. Similarities between the representations of failure scenarios and the actual engine behavior are used to diagnose fault conditions which have already occurred, or are about to occur; to increase the surveillance by the monitoring system of relevant engine parameters; and to predict likely future engine behavior.

[Hospital clinical engineer orientation and function in the maintenance system of hospital medical equipment].

PubMed

Li, Bin; Zheng, Yunxin; He, Dehua; Jiang, Ruiyao; Chen, Ying; Jing, Wei

2012-03-01

The quantity of medical equipment in hospital rise quickly recent year. It provides the comprehensive support to the clinical service. The maintenance of medical equipment becomes more important than before. It is necessary to study on the orientation and function of clinical engineer in medical equipment maintenance system. Refer to three grade health care system, the community doctors which is called General practitioner, play an important role as the gatekeeper of health care system to triage and cost control. The paper suggests that hospital clinical engineer should play similar role as the gatekeeper of medical equipment maintenance system which composed by hospital clinical engineer, manufacture engineer and third party engineer. The hospital clinical engineer should be responsible of guard a pass of medical equipment maintenance quality and cost control. As the gatekeeper, hospital clinical engineer should take the responsibility of "General engineer" and pay more attention to safety and health of medical equipment. The responsibility description and future transition? development of clinical engineer as "General Engineer" is discussed. More attention should be recommended to the team building of hospital clinical engineer as "General Engineer".

Engineering: Defining and differentiating its unique culture

NASA Astrophysics Data System (ADS)

Pilotte, Mary K.

The world of work for engineering professionals is changing. At a rapid pace, experienced engineers are exiting the workforce due to retirement of the Baby Boomer generation, while at the same time the problems facing engineers are increasingly complex and frequently global in nature. For firms to protect their knowledge assets, they must ensure that acquired understandings are shared among their engineering work groups. Engineering teaching and learning in the workplace (i.e., knowledge sharing), is a social activity that resides in a social context governed by the professional engineering culture. This quantitative study uses Hofstede's Organizational Cultural Values Model (Hofstede, Neuijen, Ohayv, & Sanders, 1990) to examine dimensions of engineering culture in the workplace, producing a central tendency profile of engineering's cultural practices. Further, it explores through hypotheses if demographic differentiators, including birth generation, gender, race, industry sector of employment, and engineering discipline, play roles in forming engineering cultural practices. Results both corroborate aspects of Hofstede's model and assert new understandings relative to factors influencing dimensions of engineering practice. Outcomes are discussed in terms of their potential impact on industrial knowledge sharing and formation of beneficial engineering cultures.

Development of natural gas rotary engines

NASA Astrophysics Data System (ADS)

Mack, J. R.

1991-08-01

Development of natural gas-fueled rotary engines was pursued on the parallel paths of converted Mazda automotive engines and of establishing technology and demonstration of a test model of a larger John Deer Technologies Incorporated (JDTI) rotary engine with power capability of 250 HP per power section for future production of multi-rotor engines with power ratings 250, 500, and 1000 HP and upward. Mazda engines were converted to natural gas and were characterized by a laboratory which was followed by nearly 12,000 hours of testing in three different field installations. To develop technology for the larger JDTI engine, laboratory and engine materials testing was accomplished. Extensive combustion analysis computer codes were modified, verified, and utilized to predict engine performance, to guide parameters for actual engine design, and to identify further improvements. A single rotor test engine of 5.8 liter displacement was designed for natural gas operation based on the JDTI 580 engine series. This engine was built and tested. It ran well and essentially achieved predicted performance. Lean combustion and low NOW emission were demonstrated.

Engineers’ Responsibilities for Global Electronic Waste: Exploring Engineering Student Writing Through a Care Ethics Lens

PubMed Central

Campbell, Ryan C.; Wilson, Denise

2016-01-01

This paper provides an empirically informed perspective on the notion of responsibility using an ethical framework that has received little attention in the engineering-related literature to date: ethics of care. In this work, we ground conceptual explorations of engineering responsibility in empirical findings from engineering student’s writing on the human health and environmental impacts of “backyard” electronic waste recycling/disposal. Our findings, from a purposefully diverse sample of engineering students in an introductory electrical engineering course, indicate that most of these engineers of tomorrow associated engineers with responsibility for the electronic waste (e-waste) problem in some way. However, a number of responses suggested attempts to deflect responsibility away from engineers towards, for example, the government or the companies for whom engineers work. Still other students associated both engineers and non-engineers with responsibility, demonstrating the distributed/collective nature of responsibility that will be required to achieve a solution to the global problem of excessive e-waste. Building upon one element of a framework for care ethics adopted from the wider literature, these empirical findings are used to facilitate a preliminary, conceptual exploration of care-ethical responsibility within the context of engineering and e-waste recycling/disposal. The objective of this exploration is to provide a first step toward understanding how care-ethical responsibility applies to engineering. We also hope to seed dialogue within the engineering community about its ethical responsibilities on the issue. We conclude the paper with a discussion of its implications for engineering education and engineering ethics that suggests changes for educational policy and the practice of engineering. PMID:27368195

First-year engineering students' views of the nature of engineering

NASA Astrophysics Data System (ADS)

Karatas, Faik O.

The changing nature of engineering problems and new challenges that result from globalization and new ways of doing business have triggered calls for a revolutionary shift in engineering education. To respond to these challenges, the engineering education paradigm has been revised by adding more design and humanities/social sciences components to it. Philosophy, sociology, and history of engineering are more often cited as a major part of engineering education in this movement. Research on the nature of engineering (NOE), which is derived from philosophy, sociology, and the history of engineering, could have as much potential impact on engineering education as research on the nature of science (NOS) has had on science education. Thus, it is surprising that there has been no noteworthy research on this topic. The purpose of this study is to describe and determine first-year engineering students' views of the NOE and how these students differentiate engineering from science. In this research, an open-ended Views of the Nature of Engineering questionnaire (VNOE) was employed to collect baseline data. Semi-structured interviews based on the VNOE questionnaire were conducted with the second cohort of the participants. Data analysis was guided by a traditional phenomenographic approach, which is a branch of the hermeneutic tradition, coupled to constant comparison technique. The results of this study indicated that the participants' overall views of the nature of engineering were not ill-developed, but rather unarticulated. Moreover, the relationship between engineering and science was considered unidirectional rather than bidirectional. The results of this study could be used to inform engineering educators, first-year engineering coordinators, and policy makers as well as serving as the base for further research and potential implications for future first-year and K-12 engineering education.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin Young

In this paper, the author describes how engineers can increase the number of future engineers by volunteering as guest speakers in the elementary school classroom. The paper is divided into three main subjects. First, the importance of engineers speaking directly with young students is discussed. Next, several best practice techniques for speaking with young students are described. Finally, information on getting started as a guest speaker is presented, and a list of resources available to guest speakers is provided. The guest engineer speaking to an elementary school audience (ages 6-11) performs a critical role in encouraging young students to pursuemore » a career in engineering. Often, he or she is the first engineer these students meet in person, providing a crucial first impression of the engineering career field and a positive visual image of what an engineer really looks like. A dynamic speaker presenting a well-delivered talk creates a lasting, positive impression on students, influencing their future decisions to pursue careers in engineering. By reaching these students early in life, the guest speaker will help dispel the many prevailing stereotypes about engineers which discourage so many students, especially young women, from considering this career. The guest speaker can ensure young students gain a positive first impression of engineers and the engineering career field by following some best practice techniques in preparing for and delivering their presentation. The author, an electrical engineer, developed these best practice techniques over the past 10 years while presenting over 350 talks on engineering subjects to elementary school students as a volunteer speaker with the U.S. Department of Energy, Idaho National Laboratory’s Speakers Bureau. Every engineer can make a meaningful contribution toward reversing the predicted shortfall of future engineers by volunteering to speak with young students at the elementary school level. Elementary school teachers typically have a limited education in engineering and are eager to have career engineers speak with their students. As an engineer, there are many opportunities to get involved with guest speaking at the elementary school level. If you have a young child, start by meeting with her or his teacher and volunteering to give a presentation on engineering to the class. Many organizations have formal speakers bureaus. If your organization does not have one, consider starting one. There are several excellent resources on the Internet, such as the IEEE Center for Pre-University Engineering Education’s TryEngineering.org Web site. This site is designed for young students, teachers and parents, giving information on engineering careers and engineering activities the guest speaker can use to prepare a dynamic and informative presentation. Young students who have experienced a positive interaction with an engineer are more likely to pursue a career in engineering. Effective guest speaking by engineers in elementary school classrooms today will increase the likelihood these young students will become the desperately needed engineers of our future.« less

The Effects of Cylinder Head Gasket Opening on Engine Temperature Distribution for a Water-Cooled Engine

NASA Astrophysics Data System (ADS)

Jang, J. Y.; Chi, G. X.

2017-02-01

In a liquid-cooled engine, coolant is pumped throughout the water jacket of the engine, drawing heat from the cylinder head, pistons, combustion chambers, cylinder walls, and valves, etc. If the engine temperature is too high or too low, various problems will occur. These include overheating of the lubricating oil and engine parts, excessive stresses between engine parts, loss of power, incomplete burning of fuel, etc. Thus, the engine should be maintained at the proper operating temperature. This study investigated the effects of different cylinder head gasket opening on the engine temperature distributions in a water-cooled motorcycle engine. The numerical predictions for the temperature distribution are in good agreement with the experimental data within 20%.

Collaborative Systems Thinking: A Response to the Problems Faced by Systems Engineering's 'Middle Tier'

NASA Technical Reports Server (NTRS)

Phfarr, Barbara B.; So, Maria M.; Lamb, Caroline Twomey; Rhodes, Donna H.

2009-01-01

Experienced systems engineers are adept at more than implementing systems engineering processes: they utilize systems thinking to solve complex engineering problems. Within the space industry demographics and economic pressures are reducing the number of experienced systems engineers that will be available in the future. Collaborative systems thinking within systems engineering teams is proposed as a way to integrate systems engineers of various experience levels to handle complex systems engineering challenges. This paper uses the GOES-R Program Systems Engineering team to illustrate the enablers and barriers to team level systems thinking and to identify ways in which performance could be improved. Ways NASA could expand its engineering training to promote team-level systems thinking are proposed.

Two-stroke S.I. engine competitive to four-stroke engine in terms of the exhaust emission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pavletic, R.; Trenc, F.

1994-09-01

A model engine with disintegrated working cycle was built. Its operation is not autonomous; compression of the working air is performed separately outside the engine by the compressed-air line supply. Pre-compressed charge together with the injected fuel is introduced in the combustion chamber. The model engine makes possible to determine indicated performance characteristics and its emission capability. Effective measured engine characteristics are of course not comparable with those obtained by a practical engine. The model presented is a two-stroke cycle engine. Exhaust emission picture of the presented engine is comparable with the emission of a modern four-stroke engine. 2 refs.,more » 13 figs., 2 tabs.« less

Interactive-graphic flowpath plotting for turbine engines

NASA Technical Reports Server (NTRS)

Corban, R. R.

1981-01-01

An engine cycle program capable of simulating the design and off-design performance of arbitrary turbine engines, and a computer code which, when used in conjunction with the cycle code, can predict the weight of the engines are described. A graphics subroutine was added to the code to enable the engineer to visualize the designed engine with more clarity by producing an overall view of the designed engine for output on a graphics device using IBM-370 graphics subroutines. In addition, with the engine drawn on a graphics screen, the program allows for the interactive user to make changes to the inputs to the code for the engine to be redrawn and reweighed. These improvements allow better use of the code in conjunction with the engine program.

The history and evolution of optically accessible research engines and their impact on our understanding of engine combustion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miles, Paul C.

2015-03-01

The development and application of optically accessible engines to further our understanding of in-cylinder combustion processes is reviewed, spanning early efforts in simplified engines to the more recent development of high-pressure, high-speed engines that retain the geometric complexities of modern production engines. Limitations of these engines with respect to the reproduction of realistic metal test engine characteristics and performance are identified, as well as methods that have been used to overcome these limitations. Finally, the role of the work performed in these engines on clarifying the fundamental physical processes governing the combustion process and on laying the foundation for predictivemore » engine simulation is summarized.« less

A 150 and 300 kW lightweight diesel aircraft engine design study

NASA Technical Reports Server (NTRS)

Brouwers, A. P.

1980-01-01

The diesel engine was reinvestigated as an aircraft powerplant through design study conducted to arrive at engine configurations and applicable advanced technologies. Two engines are discussed, a 300 kW six-cylinder engine for twin engine general aviation aircraft and a 150 kW four-cylinder engine for single engine aircraft. Descriptions of each engine include concept drawings, a performance analysis, stress and weight data, and a cost study. This information was used to develop two airplane concepts, a six-place twin and a four-place single engine aircraft. The aircraft study consists of installation drawings, computer generated performance data, aircraft operating costs, and drawings of the resulting airplanes. The performance data show a vast improvement over current gasoline-powered aircraft.

Small Engine Component Technology (SECT) study

NASA Technical Reports Server (NTRS)

Singh, B.

1986-01-01

Small advanced (450 to 850 pounds thrust, 2002 to 3781 N) gas turbine engines were studied for a subsonic strategic cruise missile application, using projected year 2000 technology. An aircraft, mission characteristics, and baseline (state-of-the-art) engine were defined to evaluate technology benefits. Engine performance and configuration analyses were performed for two and three spool turbofan and propfan engine concepts. Mission and Life Cycle Cost (LCC) analyses were performed in which the candidate engines were compared to the baseline engines over a prescribed mission. The advanced technology engines reduced system LCC up to 41 percent relative to the baseline engine. Critical aerodynamic, materials, and mechanical systems turbine engine technologies were identified and program plans were defined for each identified critical technology.

Correlation tests of the engine performance parameter by using the detrended cross-correlation coefficient

NASA Astrophysics Data System (ADS)

Dong, Keqiang; Gao, You; Jing, Liming

2015-02-01

The presence of cross-correlation in complex systems has long been noted and studied in a broad range of physical applications. We here focus on an aero-engine system as an example of a complex system. By applying the detrended cross-correlation (DCCA) coefficient method to aero-engine time series, we investigate the effects of the data length and the time scale on the detrended cross-correlation coefficients ρ DCCA ( T, s). We then show, for a twin-engine aircraft, that the engine fuel flow time series derived from the left engine and the right engine exhibit much stronger cross-correlations than the engine exhaust-gas temperature series derived from the left engine and the right engine do.

The gate studies: Assessing the potential of future small general aviation turbine engines

NASA Technical Reports Server (NTRS)

Strack, W. C.

1979-01-01

Four studies were completed that explore the opportunities for future General Aviation turbine engines (GATE) in the 150-1000 SHP class. These studies forecasted the potential impact of advanced technology turbine engines in the post-1988 market, identified important aircraft and missions, desirable engine sizes, engine performance, and cost goals. Parametric evaluations of various engine cycles, configurations, design features, and advanced technology elements defined baseline conceptual engines for each of the important missions identified by the market analysis. Both fixed-wing and helicopter aircraft, and turboshaft, turboprop, and turbofan engines were considered. Sizable performance gains (e.g., 20% SFC decrease), and large engine cost reductions of sufficient magnitude to challenge the reciprocating engine in the 300-500 SHP class were predicted.

40 CFR 1033.130 - Instructions for engine remanufacturing or engine installation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Instructions for engine remanufacturing or engine installation. 1033.130 Section 1033.130 Protection of Environment ENVIRONMENTAL... and Related Requirements § 1033.130 Instructions for engine remanufacturing or engine installation. (a...

14 CFR 29.903 - Engines.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

78 FR 13030 - Board on Coastal Engineering Research

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting... coastal engineering field and the objectives of the Chief of Engineers. Proposed Agenda: On Monday, March...

77 FR 52701 - Board on Coastal Engineering Research

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting... consonance with the needs of the coastal engineering field and the objectives of the Chief of Engineers...

Industrial Education. "Small Engines".

ERIC Educational Resources Information Center

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

14 CFR 29.903 - Engines.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

40 CFR 1033.130 - Instructions for engine remanufacturing or engine installation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Instructions for engine remanufacturing or engine installation. 1033.130 Section 1033.130 Protection of Environment ENVIRONMENTAL... and Related Requirements § 1033.130 Instructions for engine remanufacturing or engine installation. (a...

40 CFR 1033.130 - Instructions for engine remanufacturing or engine installation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Instructions for engine remanufacturing or engine installation. 1033.130 Section 1033.130 Protection of Environment ENVIRONMENTAL... and Related Requirements § 1033.130 Instructions for engine remanufacturing or engine installation. (a...

40 CFR 1033.130 - Instructions for engine remanufacturing or engine installation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Instructions for engine remanufacturing or engine installation. 1033.130 Section 1033.130 Protection of Environment ENVIRONMENTAL... and Related Requirements § 1033.130 Instructions for engine remanufacturing or engine installation. (a...

40 CFR 1033.130 - Instructions for engine remanufacturing or engine installation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Instructions for engine remanufacturing or engine installation. 1033.130 Section 1033.130 Protection of Environment ENVIRONMENTAL... and Related Requirements § 1033.130 Instructions for engine remanufacturing or engine installation. (a...

14 CFR 29.903 - Engines.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

14 CFR 29.903 - Engines.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

14 CFR 29.903 - Engines.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Engines. 29.903 Section 29.903 Aeronautics... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.903 Engines. (a) Engine type certification. Each engine must have an approved type certificate. Reciprocating engines for use in helicopters must...

Aerospike Engine Post-Test Diagnostic System Delivered to Rocketdyne

NASA Technical Reports Server (NTRS)

Meyer, Claudia M.

2000-01-01

The NASA Glenn Research Center at Lewis Field, in cooperation with Rocketdyne, has designed, developed, and implemented an automated Post-Test Diagnostic System (PTDS) for the X-33 linear aerospike engine. The PTDS was developed to reduce analysis time and to increase the accuracy and repeatability of rocket engine ground test fire and flight data analysis. This diagnostic system provides a fast, consistent, first-pass data analysis, thereby aiding engineers who are responsible for detecting and diagnosing engine anomalies from sensor data. It uses analytical methods modeled after the analysis strategies used by engineers. Glenn delivered the first version of PTDS in September of 1998 to support testing of the engine s power pack assembly. The system was used to analyze all 17 power pack tests and assisted Rocketdyne engineers in troubleshooting both data acquisition and test article anomalies. The engine version of PTDS, which was delivered in June of 1999, will support all single-engine, dual-engine, and flight firings of the aerospike engine.

Analysis of Performance of Jet Engine from Characteristics of Components II : Interaction of Components as Determined from Engine Operation

NASA Technical Reports Server (NTRS)

Goldstein, Arthur W; Alpert, Sumner; Beede, William; Kovach, Karl

1949-01-01

In order to understand the operation and the interaction of jet-engine components during engine operation and to determine how component characteristics may be used to compute engine performance, a method to analyze and to estimate performance of such engines was devised and applied to the study of the characteristics of a research turbojet engine built for this investigation. An attempt was made to correlate turbine performance obtained from engine experiments with that obtained by the simpler procedure of separately calibrating the turbine with cold air as a driving fluid in order to investigate the applicability of component calibration. The system of analysis was also applied to prediction of the engine and component performance with assumed modifications of the burner and bearing characteristics, to prediction of component and engine operation during engine acceleration, and to estimates of the performance of the engine and the components when the exhaust gas was used to drive a power turbine.

Performance Benefits for Wave Rotor-Topped Gas Turbine Engines

NASA Technical Reports Server (NTRS)

Jones, Scott M.; Welch, Gerard E.

1996-01-01

The benefits of wave rotor-topping in turboshaft engines, subsonic high-bypass turbofan engines, auxiliary power units, and ground power units are evaluated. The thermodynamic cycle performance is modeled using a one-dimensional steady-state code; wave rotor performance is modeled using one-dimensional design/analysis codes. Design and off-design engine performance is calculated for baseline engines and wave rotor-topped engines, where the wave rotor acts as a high pressure spool. The wave rotor-enhanced engines are shown to have benefits in specific power and specific fuel flow over the baseline engines without increasing turbine inlet temperature. The off-design steady-state behavior of a wave rotor-topped engine is shown to be similar to a conventional engine. Mission studies are performed to quantify aircraft performance benefits for various wave rotor cycle and weight parameters. Gas turbine engine cycles most likely to benefit from wave rotor-topping are identified. Issues of practical integration and the corresponding technical challenges with various engine types are discussed.

Multi-Fuel Rotary Engine for General Aviation Aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies, conducted for NASA, of Advanced Multi-fuel General Aviation and Commuter Aircraft Rotary Stratified Charge Engines are summarized. Conceptual design studies of an advanced engine sized to provide 186/250 shaft KW/HP under cruise conditions at 7620/25,000 m/ft. altitude were performed. Relevant engine development background covering both prior and recent engine test results of the direct injected unthrottled rotary engine technology, including the capability to interchangeably operate on gasoline, diesel fuel, kerosene, or aviation jet fuel, are presented and related to growth predictions. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 30 to 35% fuel economy improvement for the Rotary-engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed.

A New Method to Measure Temperature and Burner Pattern Factor Sensing for Active Engine Control

NASA Technical Reports Server (NTRS)

Ng, Daniel

1999-01-01

The determination of the temperatures of extended surfaces which exhibit non-uniform temperature variation is very important for a number of applications including the "Burner Pattern Factor" (BPF) of turbine engines. Exploratory work has shown that use of BPF to control engine functions can result in many benefits, among them reduction in engine weight, reduction in operating cost, increase in engine life, while attaining maximum engine efficiency. Advanced engines are expected to operate at very high temperature to achieve high efficiency. Brief exposure of engine components to higher than design temperatures due to non-uniformity in engine burner pattern can reduce engine life. The engine BPF is a measure of engine temperature uniformity. Attainment of maximum temperature uniformity and high temperatures is key to maximum efficiency and long life. A new approach to determine through the measurement of just one radiation spectrum by a multiwavelength pyrometer is possible. This paper discusses a new temperature sensing approach and its application to determine the BPF.

Integration of Engineering Education by High School Teachers to Meet Standards in the Physics Classroom

NASA Astrophysics Data System (ADS)

Kersten, Jennifer Anna

In recent years there has been increasing interest in engineering education at the K-12 level, which has resulted in states adopting engineering standards as a part of their academic science standards. From a national perspective, the basis for research into engineering education at the K-12 level is the belief that it is of benefit to student learning, including to "improve student learning and achievement in science and mathematics; increase awareness of engineering and the work of engineers; boost youth interest in pursuing engineering as a career; and increase the technological literacy of all students" (National Research Council, 2009a, p. 1). The above has led to a need to understand how teachers are currently implementing engineering education in their classrooms. High school physics teachers have a history of implementing engineering design projects in their classrooms, thus providing an appropriate setting to look for evidence of quality engineering education at the high school level. Understanding the characteristics of quality engineering integration can inform curricular and professional development efforts for teachers asked to implement engineering in their classrooms. Thus, the question that guided this study is: How, and to what extent, do physics teachers represent quality engineering in a physics unit focused on engineering? A case study research design was implemented for this project. Three high school physics teachers were participants in this study focused on the integration of engineering education into the physics classroom. The data collected included observations, interviews, and classroom documents that were analyzed using the Framework for Quality K-12 Engineering Education (Moore, Glancy et al., 2013). The results provided information about the areas of the K-12 engineering framework addressed during these engineering design projects, and detailed the quality of these lesson components. The results indicate that all of the design projects contained components of the indicators central to engineering education, although with varied degrees of success. In addition, each design project contained aspects important to the development of students' understanding of engineering and that promote important professional skills used by engineers. The implications of this work are discussed at the teacher, school, professional development, and policy levels.

4. INTERIOR OF ENGINE ROOM, CONTAINING UNITEDTOD TWINTANDEM ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. INTERIOR OF ENGINE ROOM, CONTAINING UNITED-TOD TWIN-TANDEM ENGINE, FOR 40" BLOOMING MILL; AS SEEN FROM THE UPPER LEVEL BRIDGE CRANE, THIS ENGINE WAS THE DIRECT DRIVE TO THE 40" BLOOMING MILL LOCATED IN THE ADJACENT ROOM TO THE LEFT. THE UNITED-TOD ENGINE, A TWIN TANDEM COMPOUND STEAM ENGINE, WAS RATED AT 20,000 MP. IN 1946 NEW HIGH PRESSURE CYLINDERS WERE INSTALLED AND THE ENGINE RAN ON 200 PSI STEAM, WITH A 44"X76"X60" STROKE, TO A BUILT-UP COUNTER-BALANCED CENTER CRANK. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

An Introduction to Thermal-Fluid Engineering

NASA Astrophysics Data System (ADS)

Warhaft, Zellman

1998-01-01

This text is the first to provide an integrated introduction to basic engineering topics and the social implications of engineering practice. Aimed at beginning engineering students, the book presents the basic ideas of thermodynamics, fluid mechanics, heat transfer, and combustion through a real-world engineering situation. It relates the engine to the atmosphere in which it moves and exhausts its waste products. The book also discusses the greenhouse effect and atmospheric inversions, and the social implications of engineering in a crowded world with increasing energy demands. Students in mechanical, civil, agricultural, environmental, aerospace, and chemical engineering will welcome this engaging, well-illustrated introduction to thermal-fluid engineering.

Overcoming Present-Day Powerplant Limitations Via Unconventional Engine Configurations

NASA Technical Reports Server (NTRS)

Meitner, Peter L.

2006-01-01

The Army Research Laboratory s Vehicle Technology Directorate is sponsoring the prototype development of three unconventional engine concepts - two intermittent combustion (IC) engines and one turbine engine (via SBIR (Small Business Innovative Research) contracts). The IC concepts are the Nutating Engine and the Bonner Engine, and the turbine concept is the POWER Engine. Each of the three engines offers unique and greatly improved capabilities (which cannot be achieved by present-day powerplants), while offering significant reductions in size and weight. This paper presents brief descriptions of the physical characteristics of the three engines, and discusses their performance potentials, as well as their development status.

Space civil engineering - A new discipline

NASA Technical Reports Server (NTRS)

Sadeh, Willy Z.; Criswell, Marvin E.

1991-01-01

Space Civil Engineering is an emerging engineering discipline that focuses on extending and expanding the Civil Engineering know-how and practice to the development and maintenance of infrastructure on celestial bodies. Space Civil Engineering is presently being developed as a new discipline within the Department of Civil Engineering at Colorado State University under a recently established NASA Space Grant College Program. Academic programs geared toward creating Space Civil Engineering Options at both undergraduate and graduate levels are being formulated. Basic ideas and concepts of the curriculum in the Space Civil Engineering Option at both undergraduate and graduate levels are presented. The role of Space Civil Engineering in the Space Program is discussed.

Defining a region of optimization based on engine usage data

DOEpatents

Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

2015-08-04

Methods and systems for engine control optimization are provided. One or more operating conditions of a vehicle engine are detected. A value for each of a plurality of engine control parameters is determined based on the detected one or more operating conditions of the vehicle engine. A range of the most commonly detected operating conditions of the vehicle engine is identified and a region of optimization is defined based on the range of the most commonly detected operating conditions of the vehicle engine. The engine control optimization routine is initiated when the one or more operating conditions of the vehicle engine are within the defined region of optimization.

New opportunities for future small civil turbine engines: Overviewing the GATE studies

NASA Technical Reports Server (NTRS)

Strack, W. C.

1979-01-01

An overview of four independent studies forecasts the potential impact of advanced technology turbine engines in the post 1988 market, identifies important aircraft and missions, desirable engine sizes, engine performance, and cost goals. Parametric evaluations of various engine cycles, configurations, design features, and advanced technology elements defined baseline conceptual engines for each of the important missions identified by the market analysis. Both fixed-wing and helicopter aircraft, and turboshaft, turboprop, and turbofan engines were considered. Sizable performance gains (e.g., 20% SFC decrease), and large engine cost reductions of sufficient magnitude are predicted to challenge the reciprocating engine in the 300-500 SHP class.

The approach to engineering tasks composition on knowledge portals

NASA Astrophysics Data System (ADS)

Novogrudska, Rina; Globa, Larysa; Schill, Alexsander; Romaniuk, Ryszard; Wójcik, Waldemar; Karnakova, Gaini; Kalizhanova, Aliya

2017-08-01

The paper presents an approach to engineering tasks composition on engineering knowledge portals. The specific features of engineering tasks are highlighted, their analysis makes the basis for partial engineering tasks integration. The formal algebraic system for engineering tasks composition is proposed, allowing to set the context-independent formal structures for engineering tasks elements' description. The method of engineering tasks composition is developed that allows to integrate partial calculation tasks into general calculation tasks on engineering portals, performed on user request demand. The real world scenario «Calculation of the strength for the power components of magnetic systems» is represented, approving the applicability and efficiency of proposed approach.

NASA/GE quiet engine C acoustic test results

NASA Technical Reports Server (NTRS)

Kazin, S. B.; Pass, J. E.

1974-01-01

The acoustic investigation and evaluation of the C propulsion turbofan engine are discussed. The engine was built as a part of the Quiet Engine Program. The objectives of the program are as follows: (1) to determine the noise levels produced turbofan bypass engines, (2) to demonstrate the technology and innovations which will reduce the production and radiation of noise in turbofan engines, and (3) to acquire experimental acoustic and aerodynamic data for high bypass turbofan engines to provide a better understanding of noise production mechanisms. The goals of the program called for a turbofan engine 15 to 20 PNdB quieter than currently available engines in the same thrust class.

Airesearch QCGAT program. [quiet clean general aviation turbofan engines

NASA Technical Reports Server (NTRS)

Heldenbrand, R. W.; Norgren, W. M.

1979-01-01

A model TFE731-1 engine was used as a baseline for the NASA quiet clean general aviation turbofan engine and engine/nacelle program designed to demonstrate the applicability of large turbofan engine technology to small general aviation turbofan engines, and to obtain significant reductions in noise and pollutant emissions while reducing or maintaining fuel consumption levels. All new technology design for rotating parts and all items in the engine and nacelle that contributed to the acoustic and pollution characteristics of the engine system were of flight design, weight, and construction. The major noise, emissions, and performance goals were met. Noise levels estimated for the three FAR Part 36 conditions, are 10 t0 15 ENPdB below FAA requirements; emission values are considerably reduced below that of current technology engines; and the engine performance represents a TSFC improvement of approximately 9 percent over other turbofan engines.

How engineers perceive the importance of ethics in Finland

NASA Astrophysics Data System (ADS)

Taajamaa, Ville; Majanoja, Anne-Maarit; Bairaktarova, Diana; Airola, Antti; Pahikkala, Tapio; Sutinen, Erkki

2018-01-01

Success in complex and holistic engineering practices requires more than problem-solving abilities and technical competencies. Engineering education must offer proficient technical competences and also train engineers to think and act ethically. A technical 'engineering-like' focus and demand have made educators and students overlook the importance of ethical awareness and transversal competences. Using two Finnish surveys, conducted in 2014 and 2016, we examine how engineers perceive working life needs regarding ethics. The data consider different age groups. We research whether an engineer's age affects their perception of the importance of ethics in their work and if there are differences between young experts and young managers in their use of ethics within work. The results indicate that practising engineers do not consider ethical issues important in their work. This especially applies to younger engineers; the older an engineer, the more important they consider ethics. No statistically significant difference was found between young engineering experts and managers.

Web Feet Guide to Search Engines: Finding It on the Net.

ERIC Educational Resources Information Center

Web Feet, 2001

2001-01-01

This guide to search engines for the World Wide Web discusses selecting the right search engine; interpreting search results; major search engines; online tutorials and guides; search engines for kids; specialized search tools for various subjects; and other specialized engines and gateways. (LRW)

14 CFR 29.1305 - Powerplant instruments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... temperature indicator for each turbine engine; (12) A gas producer rotor tachometer for each turbine engine... free power turbine tachometer for each turbine engine; (16) A means, for each turbine engine, to indicate power for that engine; (17) For each turbine engine, an indicator to indicate the functioning of...

14 CFR 33.84 - Engine overtorque test.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.84 Engine overtorque test. (a) If approval of a maximum engine overtorque is sought for an engine incorporating a free power turbine... turbine entry gas temperature equal to the maximum steady state temperature approved for use during...

14 CFR 29.1305 - Powerplant instruments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... temperature indicator for each turbine engine; (12) A gas producer rotor tachometer for each turbine engine... free power turbine tachometer for each turbine engine; (16) A means, for each turbine engine, to indicate power for that engine; (17) For each turbine engine, an indicator to indicate the functioning of...

14 CFR 29.1305 - Powerplant instruments.

Code of Federal Regulations, 2012 CFR

2012-01-01

... temperature indicator for each turbine engine; (12) A gas producer rotor tachometer for each turbine engine... free power turbine tachometer for each turbine engine; (16) A means, for each turbine engine, to indicate power for that engine; (17) For each turbine engine, an indicator to indicate the functioning of...

14 CFR 29.1305 - Powerplant instruments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... temperature indicator for each turbine engine; (12) A gas producer rotor tachometer for each turbine engine... free power turbine tachometer for each turbine engine; (16) A means, for each turbine engine, to indicate power for that engine; (17) For each turbine engine, an indicator to indicate the functioning of...

14 CFR 29.1305 - Powerplant instruments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... temperature indicator for each turbine engine; (12) A gas producer rotor tachometer for each turbine engine... free power turbine tachometer for each turbine engine; (16) A means, for each turbine engine, to indicate power for that engine; (17) For each turbine engine, an indicator to indicate the functioning of...

34 CFR Appendix to Part 648 - Academic Areas

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Electronic, and Communications Engineering 14.11Engineering Mechanics 14.12Engineering Physics 14.13Engineering Science 14.14Environmental/Environmental Health Engineering 14.15Geological Engineering 14... Arts and Art Studies 50.09Music 51.Health Professions and Related Sciences 51.01Chiropractic (D.C., D.C...

77 FR 9837 - Airworthiness Directives; Lycoming Engines Reciprocating Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

... Directives; Lycoming Engines Reciprocating Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Lycoming Engines reciprocating engines. This AD was prompted by a report of a ``machined-from-billet'' HA-6 carburetor having a...

46 CFR 113.35-15 - Mechanical engine order telegraph systems; application.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Mechanical engine order telegraph systems; application...) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Engine Order Telegraph Systems § 113.35-15 Mechanical engine order telegraph systems; application. If a mechanical engine order telegraph...

46 CFR 113.35-15 - Mechanical engine order telegraph systems; application.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Mechanical engine order telegraph systems; application...) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Engine Order Telegraph Systems § 113.35-15 Mechanical engine order telegraph systems; application. If a mechanical engine order telegraph...

46 CFR 113.35-15 - Mechanical engine order telegraph systems; application.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Mechanical engine order telegraph systems; application...) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Engine Order Telegraph Systems § 113.35-15 Mechanical engine order telegraph systems; application. If a mechanical engine order telegraph...

46 CFR 113.35-15 - Mechanical engine order telegraph systems; application.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Mechanical engine order telegraph systems; application...) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Engine Order Telegraph Systems § 113.35-15 Mechanical engine order telegraph systems; application. If a mechanical engine order telegraph...

Chemical Engineering Students: A Distinct Group among Engineers

ERIC Educational Resources Information Center

Godwin, Allison; Potvin, Geoff

2013-01-01

This paper explores differences between chemical engineering students and students of other engineering disciplines, as identified by their intended college major. The data used in this analysis was taken from the nationally representative Sustainability and Gender in Engineering (SaGE) survey. Chemical engineering students differ significantly…

Biotechnology Process Engineering Center at MIT Home

Science.gov Websites

Bioengineering / Engineering Research Centers Georgia Tech / Emory Center for the Engineering of Living Tissues University of Washington / Engineered Biomaterials Engineering Research Center Vanderbilt University / VaNTH Surgical Systems and Technology Univesity of Hawaii / Marine Bioproducts Engineering Center Funding Sources

76 FR 37084 - Board on Coastal Engineering Research

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting: July... coastal engineering field and the objectives of the Chief of Engineers. Proposed Agenda: The goal of the...

75 FR 28593 - Board on Coastal Engineering Research

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Board on Coastal Engineering... following committee meeting: Name of Committee: Board on Coastal Engineering Research. Date of Meeting: June... coastal engineering field and the objectives of the Chief of Engineers. Proposed Agenda: The goal of the...

14 CFR 23.49 - Stalling period.

Code of Federal Regulations, 2011 CFR

2011-01-01

... on the stalling speed, with engine(s) idling and throttle(s) closed; (3) The propeller(s) in the... which the airplane is controllable with— (1) For reciprocating engine-powered airplanes, the engine(s... more than 110 percent of the stalling speed; (2) For turbine engine-powered airplanes, the propulsive...

75 FR 44725 - Airworthiness Directives; Pratt & Whitney PW4000 Series Turbofan Engines; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-29

... Engineer, Engine Certification Office, FAA, Engine and Propeller Directorate, 12 New England Executive Park..., Massachusetts, on July 23, 2010. Francis A. Favara, Manager, Engine and Propeller Directorate, Aircraft... PW4000 Series Turbofan Engines; Correction AGENCY: Federal Aviation Administration (FAA), DOT. ACTION...

40 CFR 1048.205 - What must I include in my application?

Code of Federal Regulations, 2014 CFR

2014-07-01

... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Certifying Engine...'s specifications and other basic parameters of the engine's design and emission controls. List the... each distinguishable engine configuration in the engine family. (b) Explain how the emission control...

40 CFR 1048.205 - What must I include in my application?

Code of Federal Regulations, 2013 CFR

2013-07-01

... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Certifying Engine...'s specifications and other basic parameters of the engine's design and emission controls. List the... each distinguishable engine configuration in the engine family. (b) Explain how the emission control...

4. Engine room, east end looking east toward engine #4 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Engine room, east end looking east toward engine #4 (Enterprise Diesel; reduction gear in foreground; in left rear, two D.C. generators with Ames Ironworks horizontal engine and sturtevant vertical engine - East Boston Pumping Station, Chelsea Street at Chelsea Creek, Boston, Suffolk County, MA

40 CFR 1065.405 - Test engine preparation and maintenance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Test engine preparation and...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Engine Selection, Preparation, and Maintenance § 1065.405 Test engine preparation and maintenance. This part 1065 describes how to test engines for a...

40 CFR 1065.405 - Test engine preparation and maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Test engine preparation and...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Engine Selection, Preparation, and Maintenance § 1065.405 Test engine preparation and maintenance. This part 1065 describes how to test engines for a...

Comparison of immunotoxic effects induced by the extracts from methanol and gasoline engine exhausts in vitro.

PubMed

Che, Wangjun; Liu, Guiming; Qiu, Hong; Zhang, Hao; Ran, Yun; Zeng, Xianggui; Wen, Weihua; Shu, Ya

2010-06-01

Gasoline engine exhaust has been considered as a major source of air pollution in China. Due to lower cyto- and geno-toxicity effects of methanol engine exhaust, methanol is regarded as a potential substitute for gasoline. We have previously compared cyto- and geno-toxicities of gasoline engine exhaust with that of methanol engine exhaust in A549 cells (Zhang et al., 2007).To characterize the immunotoxic effects for gasoline and methanol engine exhausts in immune cell, in this study, we further compared effects of gasoline and methanol engine exhausts on immune function in RAW264.7 cell and rabbit alveolar macrophages. Results showed that both gasoline and methanol engine exhaust could evidently inhibit RAW264.7 cell proliferation, promote RAW264.7 cell apoptosis, decrease E-rosette formation rate and inhibit anti-tumor effects of alveolar macrophages, at the same time, these effects of gasoline engine exhaust were far stronger than those of methanol engine exhaust. In addition, gasoline engine exhaust could significantly inhibit activities of ADCC of alveolar macrophages, but methanol engine exhaust could not. These results suggested that both gasoline and methanol engine exhausts might be immunotoxic atmospheric pollutants, but some effects of gasoline engine exhaust on immunotoxicities may be far stronger than that of methanol engine exhaust. Copyright 2010 Elsevier Ltd. All rights reserved.

Handbook of Industrial Engineering Equations, Formulas, and Calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badiru, Adedeji B; Omitaomu, Olufemi A

The first handbook to focus exclusively on industrial engineering calculations with a correlation to applications, Handbook of Industrial Engineering Equations, Formulas, and Calculations contains a general collection of the mathematical equations often used in the practice of industrial engineering. Many books cover individual areas of engineering and some cover all areas, but none covers industrial engineering specifically, nor do they highlight topics such as project management, materials, and systems engineering from an integrated viewpoint. Written by acclaimed researchers and authors, this concise reference marries theory and practice, making it a versatile and flexible resource. Succinctly formatted for functionality, the bookmore » presents: Basic Math Calculations; Engineering Math Calculations; Production Engineering Calculations; Engineering Economics Calculations; Ergonomics Calculations; Facility Layout Calculations; Production Sequencing and Scheduling Calculations; Systems Engineering Calculations; Data Engineering Calculations; Project Engineering Calculations; and Simulation and Statistical Equations. It has been said that engineers make things while industrial engineers make things better. To make something better requires an understanding of its basic characteristics and the underlying equations and calculations that facilitate that understanding. To do this, however, you do not have to be computational experts; you just have to know where to get the computational resources that are needed. This book elucidates the underlying equations that facilitate the understanding required to improve design processes, continuously improving the answer to the age-old question: What is the best way to do a job?« less

Start Your Engines: Surfing with Search Engines for Kids.

ERIC Educational Resources Information Center

Byerly, Greg; Brodie, Carolyn S.

1999-01-01

Suggests that to be an effective educator and user of the Web it is essential to know the basics about search engines. Presents tips for using search engines. Describes several search engines for children and young adults, as well as some general filtered search engines for children. (AEF)

78 FR 1728 - Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-09

... scheduled maintenance, whichever occurs first, do the following. (1) Remove the oil filler plug and check... Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines AGENCY: Federal Aviation... all Thielert Aircraft Engines GmbH (TAE) TAE 125-02-99 and TAE 125-02-114 reciprocating engines. This...

Definition of the Engineering Method.

ERIC Educational Resources Information Center

Koen, Billy Vaughn

In an effort to more clearly define the engineering method, this document attempts to draw distinctions between engineering and science. Part I, "Some Thoughts on Engineering," discusses strategies that engineers employ to solve problems, and the characteristics of the types of engineering problems. Part II, "The Principal Rule of the Engineering…