Intense X-ray machine for penetrating radiography

NASA Astrophysics Data System (ADS)

Lucht, Roy A.; Eckhouse, Shimon

Penetrating radiography has been used for many years in the nuclear weapons research programs. Infrequently penetrating radiography has been used in conventional weapons research programs. For example the Los Alamos PHERMEX machine was used to view uranium rods penetrating steel for the GAU-8 program, and the Ector machine was used to see low density regions in forming metal jets. The armor/anti-armor program at Los Alamos has created a need for an intense flash X-ray machine that can be dedicated to conventional weapons research. The Balanced Technology Initiative, through DARPA, has funded the design and construction of such a machine at Los Alamos. It will be an 8- to 10-MeV diode machine capable of delivering a dose of 500 R at 1 m with a spot size of less than 5 mm. The machine used an 87.5-stage low inductance Marx generator that charges up a 7.4-(Omega), 32-ns water line. The water line is discharged through a self-breakdown oil switch into a 12.4-(Omega) water line that rings up the voltage into the high impendance X-ray diode. A long (233-cm) vacuum drift tube is used to separate the large diameter oil-insulated diode region from the X-ray source area that may be exposed to high overpressures by the explosive experiments. The electron beam is selffocused at the target area using a low pressure background gas.

Series Fault Limiting Resistors for Atlas Marx Modules

DTIC Science & Technology

1995-07-01

use Reticulated Vitreous Carbon (RVC)2 foam blocks for the series resistor element. The blocks will serve as a resistive transmission line on the...3,4. 2. Joseph Wang, (Department of Chemistry, New Mexico State University, Las Cruces NM 88003, USA), " Reticulated Vitreous Carbon -A New Versatile...0.08 Ohm-em fitting our requirements well. The process of producing RVC results in a reproducibly refined form of continuous-fiber, vitreous Carbon

Marx and the Education of the Future

ERIC Educational Resources Information Center

Rikowski, Glenn

2004-01-01

With reference to Karl Marx's writings on education, this article outlines the education of the future as anti-capitalist education. In starting out from a conception of communism as the "real movement which abolishes the present state of things" (Marx), it is argued that the anti-capitalist education of the future consists of three…

[Karl Marx and the Malthusian theory of population].

PubMed

Jaggi, S

1985-06-01

An analysis of the works of Karl Marx is presented in order to demonstrate the importance of the population factor. The author contends that population growth is a critical factor in Marx's theory of the progressive impoverishment of the working class. However, because of his reluctance to acknowledge the value of the Malthusian contribution, Marx focused his analysis of the labor force under capitalism on the demand for workers and neglected the supply side, which is determined by the growth of population. The author concludes that Marxist theory would have benefited from greater consideration of Malthusian theory.

Karl Marx as a Social Scientist and Utopian Dreamer.

ERIC Educational Resources Information Center

Stevenson, James A.

The central paradox of Karl Marx's work is his belief that the vision of mankind leaving inequality and scarcity behind is attainable. The idea that human alienation, inequality, and need could be rendered obsolete by a future communist society of abundance is a significant failing in Marx's thought. It is at the same time the critical element in…

Marx and Dahrendorf on Income Inequality, Class Consciousness and Class Conflict: An Empirical Test.

ERIC Educational Resources Information Center

Robinson, Robert V.; Kelley, Jonathan

The issue addressed by this paper is the lack of empirical research on the class theories of Karl Marx and Ralf Dahrendorf. In order to bridge this gap, data are analyzed on the theoretical and statistical implications of Marx's theory (which focuses on ownership of the means of production) and Dahrendorf's theory (which focuses on authority in…

An Exploration of Educative "Praxis": Reflections on Marx's Concept "Praxis," Informed by the Lacanian Concepts "Act" and "Event"

ERIC Educational Resources Information Center

Hanley, Chris

2017-01-01

This article explores an aspect of Karl Marx's concept, praxis. Praxis is meaningful work, through which we fulfil ourselves by fulfilling others. The discussion draws on the author's work with postgraduate student teachers, where both students and author were researching their own practice. Reflecting Marx's conception of praxis as subjective…

Evaluation of 25-gauge Quincke and 24-gauge Gertie Marx needles for spinal anaesthesia for caesarean section.

PubMed

Imarengiaye, C O; Edomwonyi, N P

2002-07-01

To compare the insertion characteristics and rate of complications between 25-gauge Quincke and 24-gauge Gertie Marx needles. Prospective, randomized study. University of Benin Teaching Hospital; a university-affiliated tertiary centre. Parturients (ASA 1 and 2) scheduled for elective caesarean section. They were randomly assigned to receive spinal anaesthesia with either 25-gauge Quincke needle or 24-gauge Gertie Marx needle. The patients with abnormal spaces, coagulopathy, infection, pre-eclampsia/eclampsia or obesity were excluded. The number of attempts at successful identification of the spinal space, intraoperative complications, incidence of postdural puncture headache (PDPH), non-postdural puncture headache (NPDPH) and backache. Sixty women were studied. The 24-gauge Gertie Marx needle resulted in more successful location of the spinal space on the second attempt (P<0.05). Non-postdural puncture headache was seen in 43% of the study population. PDPH was seen in 10% of the Quincke group and none in the Gertie Marx group. There was no difference in the incidence of backache in both groups. The ease of insertion and low incidence of PDPH with the Gertie Marx needle may encourage trainee anaesthetists to use this needle for caesarean section.

Impedance matching for repetitive high voltage all-solid-state Marx generator and excimer DBD UV sources

NASA Astrophysics Data System (ADS)

Wang, Yonggang; Tong, Liqing; Liu, Kefu

2017-06-01

The purpose of impedance matching for a Marx generator and DBD lamp is to limit the output current of the Marx generator, provide a large discharge current at ignition, and obtain fast voltage rising/falling edges and large overshoot. In this paper, different impedance matching circuits (series inductor, parallel capacitor, and series inductor combined with parallel capacitor) are analyzed. It demonstrates that a series inductor could limit the Marx current. However, the discharge current is also limited. A parallel capacitor could provide a large discharge current, but the Marx current is also enlarged. A series inductor combined with a parallel capacitor takes full advantage of the inductor and capacitor, and avoids their shortcomings. Therefore, it is a good solution. Experimental results match the theoretical analysis well and show that both the series inductor and parallel capacitor improve the performance of the system. However, the series inductor combined with the parallel capacitor has the best performance. Compared with driving the DBD lamp with a Marx generator directly, an increase of 97.3% in radiant power and an increase of 59.3% in system efficiency are achieved using this matching circuit.

Darnton’s Cats, Bacon’s Rifle, and History of Science 101.

PubMed

Küçük, Harun

2016-12-01

Many of us who teach History of Science 101 courses face a situation where we must tell our story without relying on students’ prior knowledge of, say, the significance of ancient Greece and China, premodern and modern colonialism, or Marx. This leaves us needing a clear and punchy basic message, supported by a solid, well-structured, and inclusive story line that also doubles as world history. This response takes a look at the prospects and problems of longue durée histories of science from the perspective of cultural history. It voices sympathy toward Frans van Lunteren’s project and presents a small sample of potential difficulties involved in matching machines with historical periods.

Understanding Soviet Objectives and Behavior,

DTIC Science & Technology

1984-05-17

Soviet claim of the ultimate victory of socialism over capitalism is found in The Commu- nist Manifesto which was written in 1848 by Karl Marx , a...ends can be attained only by the forcible overthrow of all existing 2 aocial conditions. . . They have a world to win. Karl Marx , 1848 socialism...Novosti 1978 Yearbook of the USSR, p. 34. 3. Karl Marx and Friedrich Engels, The Communist Manifesto (Introduction by A. J. P. Taylor), pp. 79, 91, 93-94

Naval War College Review. Volume 61, Number 4, Autumn 2008

DTIC Science & Technology

2008-01-01

Sigmund Freud , to name just two intellectuals who made the mistake of ascrib- ing the ills of the world to a single factor. In the case of Marx, the single...factor was the means of production and distribution. For Freud , it was the great inner tension between the desires of the individual psyche and the...demands of an or- dered society. Like Ms. West, both Marx and Freud pointed to a factor that mat- tered. But also like her, Marx and Freud laid too

Facial swelling

MedlinePlus

... Marx JA, Hockberger RS, Walls RM, eds. Rosen's Emergency Medicine . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ... Marx JA, Hockberger RS, Walls RM, eds. Rosen's Emergency Medicine . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

Ignition of a Deuterium Micro-Detonation with a Gigavolt Super Marx Generator

NASA Astrophysics Data System (ADS)

Winterberg, Friedwardt

2009-09-01

The Centurion-Halite experiment demonstrated the feasibility of igniting a deuterium-tritium micro-explosion with an energy of not more than a few megajoule, and the Mike test, the feasibility of a pure deuterium explosion with an energy of more than 106 MJ. In both cases the ignition energy was supplied by a fission bomb explosive. While an energy of a few megajoule, to be released in the time required of less than 10-9 s, can be supplied by lasers and intense particle beams, this is not enough to ignite a pure deuterium explosion. Because the deuterium-tritium reaction depends on the availability of lithium, the non-fission ignition of a pure deuterium fusion reaction would be highly desirable. It is shown that this goal can conceivably be reached with a "Super Marx Generator", where a large number of "ordinary" Marx generators charge (magnetically insulated) fast high voltage capacitors of a second stage Marx generator, called a "Super Marx Generator", ultimately reaching gigavolt potentials with an energy output in excess of 100 MJ. An intense 107 Ampere-GeV proton beam drawn from a "Super Marx Generator" can ignite a deuterium thermonuclear detonation wave in a compressed deuterium cylinder, where the strong magnetic field of the proton beam entraps the charged fusion reaction products inside the cylinder. In solving the stand-off problem, the stiffness of a GeV proton beam permits to place the deuterium target at a comparatively large distance from the wall of a cavity confining the deuterium micro-explosion.

Karl Marx: "A Swarthy Fellow from Trier."

ERIC Educational Resources Information Center

Machalek, Richard

1983-01-01

Discussed are Marx's roles as a student, a journalist-scholar, a revolutionary, and a family member. Revealed is a political and intellectual figure of enormous stature and complexity, but a person typically human in passions and commitments, strengths, and shortcomings. (RM)

Reflections on Antecedents of the Holocaust.

ERIC Educational Resources Information Center

Fritz, Stephen G.

1990-01-01

Examines the influence of Karl Marx's writings on Adolf Hitler, and asks whether there was a causal nexus between Russian and Nazi atrocities. Uses primary sources as a method for historical comparison. Compares Hitler's writings on antisemitism with those of Marx. (NL)

Piaget, Marx, and Buck-Morss on Cognitive Development: A Critique and Reinterpretation

ERIC Educational Resources Information Center

Buss, Allan R.

1977-01-01

Piaget's and Marx's cognitive theories of development are briefly compared and contrasted. This provides background for a critical look at Buck-Morss' interpretation of cross-cultural differences in performance on Piagetian abstract formal reasoning tests. (MS)

Coaxial-type water load for measuring high voltage, high current and short pulse of a compact Marx system for a high power microwave source

NASA Astrophysics Data System (ADS)

Han, Jaeeun; Kim, Jung-ho; Park, Sang-duck; Yoon, Moohyun; Park, Soo Yong; Choi, Do Won; Shin, Jin Woo; So, Joon Ho

2009-11-01

A coaxial-type water load was used to measure the voltage output from a Marx generator for a high power microwave source. This output had a rise time of 20 ns, a pulse duration of a few hundred ns, and an amplitude up to 500 kV. The design of the coaxial water load showed that it is an ideal resistive divider and can also accurately measure a short pulse. Experiments were performed to test the performance of the Marx generator with the calibrated coaxial water load.

Comparison of the Recently proposed Super Marx Generator Approach to Thermonuclear Ignition with the DT Laser Fusion-Fission Hybrid Concept (LIFE) by the Lawrence Livermore National Laboratory.

NASA Astrophysics Data System (ADS)

Winterberg, Friedwardt

2009-05-01

The recently proposed Super Marx pure deuterium micro-detonation ignition concept [1] is compared to the Lawrence Livermore National Ignition Facility (NIF) laser DT fusion-fission hybrid concept (LIFE) [2]. A typical example of the LIFE concept is a fusion gain 30, and a fission gain of 10, making up for a total gain of 300, with about 10 times more energy released into fission as compared to fusion. This means a substantial release of fission products, as in fusion-less pure fission reactors. In the Super Marx approach for the ignition of a pure deuterium micro-detonation gains of the same magnitude can in theory be reached. If the theoretical prediction can be supported by more elaborate calculations, the Super Marx approach is likely to make lasers obsolete as a means for the ignition of thermonuclear micro-explosions. [1] ``Ignition of a Deuterium Micro-Detonation with a Gigavolt Super Marx Generator,'' Winterberg, F., Journal of Fusion Energy, Springer, 2008. http://www.springerlink.com/content/r2j046177j331241/fulltext.pdf. [2] ``LIFE: Clean Energy from Nuclear Waste,'' https://lasers.llnl.gov/missions/energy&_slash;for&_slash;the&_slash;future/life/

Marx's scientific theory of surplus population.

PubMed

Liu, Z

1985-07-01

This paper discusses Marx's scientific theory of surplus population in relation to the Malthusian theory of population. Marx establishes the principle that the existence of relative surplus population is determined by the immanent conditions of the mode of social production. Marx proves scientifically that the appearance of capitalist surplus population is not due to the abstract numerical ratio relation proposed by Mathus in which natural reproduction of humanity takes the geometric progression and the increase in the means of subsistence the arithmetic, but is the result of capitalist accumulation, the increase of the organic component of capital, the incessant increase in constant capital, and the relative decrease in the variable part of capital. Surplus population, according to Marx, cannot be compared with the surplus of the means of subsistence but with its condition of reproduction. Marx differentiates the surplus population into 2 kinds: the ancient population presses on the productive power, while modern productive power presses on population. In class society based on private ownership of the means of production, laborers can realize the integration with the means of production only under the condition that they provide the exploiters with surplus product; therefore, a certain amount of the laboring population are always turning into the relative surplus population. In the process of transition from the transitional to the modern type of population reproduction, there exists a traditional type of population characterized by a high birth rate, low mortality, and high natural growth rate. The situation in China is the result of the level of development of the productive forces and the corresponding underdevelopment of culture and education, but it is by no means the result of the effect of Malthus's "natural law" that population increases in a geometric progression.

A compact bipolar pulse-forming network-Marx generator based on pulse transformers.

PubMed

Zhang, Huibo; Yang, Jianhua; Lin, Jiajin; Yang, Xiao

2013-11-01

A compact bipolar pulse-forming network (PFN)-Marx generator based on pulse transformers is presented in this paper. The high-voltage generator consisted of two sets of pulse transformers, 6 stages of PFNs with ceramic capacitors, a switch unit, and a matched load. The design is characterized by the bipolar pulse charging scheme and the compact structure of the PFN-Marx. The scheme of bipolar charging by pulse transformers increased the withstand voltage of the ceramic capacitors in the PFNs and decreased the number of the gas gap switches. The compact structure of the PFN-Marx was aimed at reducing the parasitic inductance in the generator. When the charging voltage on the PFNs was 35 kV, the matched resistive load of 48 Ω could deliver a high-voltage pulse with an amplitude of 100 kV. The full width at half maximum of the load pulse was 173 ns, and its rise time was less than 15 ns.

Ultra-compact Marx-type high-voltage generator

DOEpatents

Goerz, David A.; Wilson, Michael J.

2000-01-01

An ultra-compact Marx-type high-voltage generator includes individual high-performance components that are closely coupled and integrated into an extremely compact assembly. In one embodiment, a repetitively-switched, ultra-compact Marx generator includes low-profile, annular-shaped, high-voltage, ceramic capacitors with contoured edges and coplanar extended electrodes used for primary energy storage; low-profile, low-inductance, high-voltage, pressurized gas switches with compact gas envelopes suitably designed to be integrated with the annular capacitors; feed-forward, high-voltage, ceramic capacitors attached across successive switch-capacitor-switch stages to couple the necessary energy forward to sufficiently overvoltage the spark gap of the next in-line switch; optimally shaped electrodes and insulator surfaces to reduce electric field stresses in the weakest regions where dissimilar materials meet, and to spread the fields more evenly throughout the dielectric materials, allowing them to operate closer to their intrinsic breakdown levels; and uses manufacturing and assembly methods to integrate the capacitors and switches into stages that can be arranged into a low-profile Marx generator.

Alienating Students: Marxist Theory in Action

ERIC Educational Resources Information Center

Thiele, Megan; Pan, Yung-Yi Dian; Molina, Devin

2016-01-01

Karl Marx's revolutionary call, "Workers of the World Unite," resonates with many in today's society. This article describes and assesses an easily reproducible classroom activity that simulates both alienating, and perhaps more importantly, non-alienating states of production as described by Marx. This hands-on learning activity gives…

Development of a hybrid mode linear transformer driver stage

NASA Astrophysics Data System (ADS)

Zhang, Le; Wang, Meng; Zhou, Liangji; Tian, Qing; Guo, Fan; Wang, Lingyun; Qing, Yanling; Zhao, Yue; Dai, Yingmin; Han, Wenhui; Chen, Lin; Xie, Weiping

2018-02-01

At present, the mainstream technologies of primary power sources of large pulse power devices adopt Marx or linear transformer driver (LTD) designs. Based on the analysis of the characteristics of these two types of circuit topologies, the concept of a hybrid mode LTD stage based on Marx branches is proposed. The analysis shows that the hybrid mode LTD stage can realize the following goals: (a) to reduce the energy and power handled by the basic components (switch and capacitor) to lengthen their lifetime; (b) to reduce the requirements of the multipath synchronous trigger system; and (c) to improve the maintainability of the LTD stage by using independent Marx generators instead of "traditional LTD bricks." To verify the technique, a hybrid mode LTD stage consisting of 50 branches (four-stage compact Marx generators) was designed, manufactured and tested. The stage has a radius of about 3.3 m and a height of 0.6 m. The single Marx circuit's load current is about 21 kA, with a rise time of ˜90 ns (10%-90%), under the conditions of capacitors charged to ±40 kV and a 6.9 Ω matched load. The whole stage's load current is ˜1 MA , with a rise time of ˜112 ns (10%-90%), when the capacitors are charged to ±45 kV and the matched load is 0.14 Ω .

Machine and Woodworking Tool Safety. Module SH-24. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on machine and woodworking tool safety is one of 50 modules concerned with job safety and health. This module discusses specific practices and precautions concerned with the efficient operation and use of most machine and woodworking tools in use today. Following the introduction, 13 objectives (each keyed to a page in the…

The nature and consequence of Karl Marx's skin disease.

PubMed

Shuster, S

2008-01-01

From an analysis of the original correspondence, it has been possible to establish that Karl Marx's incapacitating skin disease was hidradenitis suppurativa, not 'boils' as was universally assumed at the time and since; the psychological effect of this illness on the man and his work appears to have been considerable.

[From Paul Flechsig to the Paul Flechsig Institute for Brain Research. Development of brain research at the Karl Marx University].

PubMed

Leibnitz, L; Werner, L; Schober, W; Brauer, K

1977-04-01

A review is given on the development of the brain research institute of the Karl-Marx-University of Leipzig during the directorates of Paul Flechsig (1883-1920), Richard Arwed Pfeifer (1925-1957), and Wolfgang Wünscher (1957-1971).

Karl Marx and Group Therapy: An Old Warning about a New Phenomenon.

ERIC Educational Resources Information Center

Cooper, Terry D.

1984-01-01

Uses Marx's classic critique of religion to explore the social function of therapy groups. Investigates the manner in which groups conserve the status quo and argues that the Marxist critique can help promote a more realistic social awareness and a more effective perception of groups. (Author/JAC)

Reconsidering Marx in Post-Marxist Times: A Requiem for Postmodernism?

ERIC Educational Resources Information Center

McLaren, Peter; Farahmandpur, Ramin

2000-01-01

Marx's description of capitalism as a dark force that has become uncontrollable is very apt today, despite the fact that postmodernists have relegated Marxism to the status of failed aspirations. Discusses postmodernism, the postmodern promise, postmodern politics, the new social movements, hybridity and postmodern multiculturalism, postmodern…

The Phantasmagoria of Competition in School Ensembles

ERIC Educational Resources Information Center

Abramo, Joseph Michael

2017-01-01

Participation in competition festivals--where students and ensembles compete against each other for high scores and accolades--is a widespread practice in North American formal music education. In this article, I use Marx's theories of labor, value, and phantasmagoria to suggest a capitalist logic that structures these competitions. Marx's…

The Knife Machine. Module 15.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This module on the knife machine, one in a series dealing with industrial sewing machines, their attachments, and operation, covers one topic: performing special operations on the knife machine (a single needle or multi-needle machine which sews and cuts at the same time). These components are provided: an introduction, directions, an objective,…

Performances of a Compact, High-Power WB Source with Circular Polarization

NASA Astrophysics Data System (ADS)

Delmote, P.; Pinguet, S.; Bieth, F.

This paper presents the design and the performances of an embedded high-power microwave (HPM) wideband source, developed and built at the French-German Research Institute of Saint-Louis. The system was intended for dual use, homeland security, and military applications. It is powered by a 400 kV compact Marx generator with specificities in coaxial design and low energy. The slow monopolar signal from the Marx is sharpened using a pulse-forming stage, made of a switching module pressurized with nitrogen, followed by a monopulse-to-monocycle converter. The duration and rise times of this signal could be adjusted by varying the pressure and space between electrodes. Repetitive operations were performed up to 100 Hz during 10 s without a gas flow. Two kinds of antennas can be connected to the source. The first one is a TEM horn, with an optional dielectric lens, that radiates a vertically polarized UWB short pulse. The second one is a nine-turn helix, working in Kraus monopolar axial mode and radiating a circularly polarized wideband signal along the main axis. A dedicated conical reflector increases its directivity and bandwidth. The whole source is designed to be embedded inside an aluminum trailer, powered by batteries and remote controlled through an optical fiber.

The lid wiper and muco-cutaneous junction anatomy of the human eyelid margins: an in vivo confocal and histological study

PubMed Central

Knop, Erich; Knop, Nadja; Zhivov, Andrey; Kraak, Robert; Korb, Donald R; Blackie, Caroline; Greiner, Jack V; Guthoff, Rudolf

2011-01-01

The inner border of the eyelid margin is critically important for ocular surface integrity because it guarantees the thin spread of the tear film. Its exact morphology in the human is still insufficiently known. The histology in serial sections of upper and lower lid margins in whole-mount specimens from 10 human body donors was compared to in vivo confocal microscopy of eight eyes with a Heidelberg retina-tomograph (HRT II) and attached Rostock cornea module. Behind the posterior margin of the Meibomian orifices, the cornified epidermis stopped abruptly and was replaced by a continuous layer of para-keratinized (pk) cells followed by discontinuous pk cells. The pk cells covered the muco-cutaneous junction (MCJ), the surface of which corresponded to the line of Marx (0.2–0.3 mm wide). Then a stratified epithelium with a conjunctival structure of cuboidal cells, some pk cells, and goblet cells formed an epithelial elevation of typically about 100 μm initial thickness (lid wiper). This continued for 0.3–1.5 mm and formed a slope. The MCJ and lid wiper extended all along the lid margin from nasal to temporal positions in the upper and lower lids. Details of the epithelium and connective tissue were also detectable using the Rostock cornea module. The human inner lid border has distinct zones. Due to its location and morphology, the epithelial lip of the lid wiper appears a suitable structure to spread the tear film and is distinct from the MCJ/line of Marx. Better knowledge of the lid margin appears important for understanding dry eye disease and its morphology can be analysed clinically by in vivo confocal microscopy. PMID:21413985

Some Educational Implications of Karl Marx's Communism

ERIC Educational Resources Information Center

Hellerich, Gert

1970-01-01

According to the expressed ideas of Karl Marx, education should be viewed as a means to develop a person's whole potential and to make him a better human being. It is his contention that in a capitalist society, the educational process causes misery and exists solely to further entrench the power of the rich. (CK)

Karl Marx and the Environment

ERIC Educational Resources Information Center

Shifferd, K. D.

1972-01-01

Implications from Karl Marx's concept of nature are explored. Serving as a frame of reference for the fight against pollution, the Marxian philosophy provides a kind of systems analysis of the origins and dynamics of pollution at the level of society and a set of conceptual tools and attitudes for unmasking the claims of industry. (BL)

Um Olhar sobre "Beleza Americana" (A Look at "American Beauty").

ERIC Educational Resources Information Center

Bissoto, Maria Luisa

2000-01-01

Discusses the film "American Beauty" in light of a reading of Karl Marx. Finds that the film shows the circularity which marks bourgeois society, even though the rhythm of industry and renovation of the society masks it. States that Marx praises the industry, invention, and innovation of the bourgeoisie. (BT)

Marx and Education: Working with the Revolutionary Educator

ERIC Educational Resources Information Center

Banfield, Grant

2015-01-01

This paper positions education as productive work, i.e. radical labour. It argues that education is a deliberate and conscious process directed to the building of human capacities to labour for socialist transformation. In drawing on the intellectual resources left by Marx the objective of education is the production of the "revolutionary…

Investigations of the Interactions of Radiation with Matter.

DTIC Science & Technology

1986-07-31

Process in Atoms, Molecules and Solids, eds. A. Mei-el and J. Finster , (Karl-Marx Universitat, Leipzig, 1984), p. 58. 10. S.T. Manson in High Enery Ion...H. Toburen, and S. T. Manson in X-Ra and Inner-Shell Process in Atoms, Molecules and Solids, eds. A. Meisel and J. Finster , (Karl-Marx- Universitat

Methods, systems and apparatus for controlling operation of two alternating current (AC) machines

DOEpatents

Gallegos-Lopez, Gabriel [Torrance, CA; Nagashima, James M [Cerritos, CA; Perisic, Milun [Torrance, CA; Hiti, Silva [Redondo Beach, CA

2012-06-05

A system is provided for controlling two alternating current (AC) machines via a five-phase PWM inverter module. The system comprises a first control loop, a second control loop, and a current command adjustment module. The current command adjustment module operates in conjunction with the first control loop and the second control loop to continuously adjust current command signals that control the first AC machine and the second AC machine such that they share the input voltage available to them without compromising the target mechanical output power of either machine. This way, even when the phase voltage available to either one of the machines decreases, that machine outputs its target mechanical output power.

Particle in cell simulation of peaking switch for breakdown evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Umbarkar, Sachin B.; Bindu, S.; Mangalvedekar, H.A.

2014-07-01

Marx generator connected to peaking capacitor and peaking switch can generate Ultra-Wideband (UWB) radiation. A new peaking switch is designed for converting the existing nanosecond Marx generator to a UWB source. The paper explains the particle in cell (PIC) simulation for this peaking switch, using MAGIC 3D software. This peaking switch electrode is made up of copper tungsten material and is fixed inside the hermitically sealed derlin material. The switch can withstand a gas pressure up to 13.5 kg/cm{sup 2}. The lower electrode of the switch is connected to the last stage of the Marx generator. Initially Marx generator (withoutmore » peaking stage) in air; gives the output pulse with peak amplitude of 113.75 kV and pulse rise time of 25 ns. Thus, we design a new peaking switch to improve the rise time of output pulse and to pressurize this peaking switch separately (i.e. Marx and peaking switch is at different pressure). The PIC simulation gives the particle charge density, current density, E counter plot, emitted electron current, and particle energy along the axis of gap between electrodes. The charge injection and electric field dependence on ionic dissociation phenomenon are briefly analyzed using this simulation. The model is simulated with different gases (N{sub 2}, H{sub 2}, and Air) under different pressure (2 kg/cm{sup 2}, 5 kg/cm{sup 2}, 10 kg/cm{sup 2}). (author)« less

Automated solar module assembly line

NASA Technical Reports Server (NTRS)

Bycer, M.

1980-01-01

The solar module assembly machine which Kulicke and Soffa delivered under this contract is a cell tabbing and stringing machine, and capable of handling a variety of cells and assembling strings up to 4 feet long which then can be placed into a module array up to 2 feet by 4 feet in a series of parallel arrangement, and in a straight or interdigitated array format. The machine cycle is 5 seconds per solar cell. This machine is primarily adapted to 3 inch diameter round cells with two tabs between cells. Pulsed heat is used as the bond technique for solar cell interconnects. The solar module assembly machine unloads solar cells from a cassette, automatically orients them, applies flux and solders interconnect ribbons onto the cells. It then inverts the tabbed cells, connects them into cell strings, and delivers them into a module array format using a track mounted vacuum lance, from which they are taken to test and cleaning benches prior to final encapsulation into finished solar modules. Throughout the machine the solar cell is handled very carefully, and any contact with the collector side of the cell is avoided or minimized.

[Research on infrared safety protection system for machine tool].

PubMed

Zhang, Shuan-Ji; Zhang, Zhi-Ling; Yan, Hui-Ying; Wang, Song-De

2008-04-01

In order to ensure personal safety and prevent injury accident in machine tool operation, an infrared machine tool safety system was designed with infrared transmitting-receiving module, memory self-locked relay and voice recording-playing module. When the operator does not enter the danger area, the system has no response. Once the operator's whole or part of body enters the danger area and shades the infrared beam, the system will alarm and output an control signal to the machine tool executive element, and at the same time, the system makes the machine tool emergency stop to prevent equipment damaged and person injured. The system has a module framework, and has many advantages including safety, reliability, common use, circuit simplicity, maintenance convenience, low power consumption, low costs, working stability, easy debugging, vibration resistance and interference resistance. It is suitable for being installed and used in different machine tools such as punch machine, pour plastic machine, digital control machine, armor plate cutting machine, pipe bending machine, oil pressure machine etc.

[Territorial differences in the occurrence of caries in Karl Marx Stadt children and adolescent after 12 years of water fluoridation].

PubMed

Künzel, W

1976-01-01

Cariostatistical comparisons made since the start of drinking-water fluoridation in Karl-Marx-Stadt suggested territorial differences in the prevalence of dental decay. In the present paper an attempt is made to analyse the problems involved, with due consideration being given to both demographic and ecological factors.

[Results of school inspections in the county of Karl-Marx-Stadt (author's transl)].

PubMed

Arnold, J

1978-10-01

Within the Health Protection in Childhood and Adolescence Research Project a hygienic inspection questionnaire was designed for schools. To test this questionnaire, 248 schools in 11 districts of the county of Karl-Marx-Stadt were inspected. From the ascertainments made, several instances are cited to point out the priorities of school hygiene.

Pop Culture in the Classroom: "American Idol," Karl Marx, and Alexis de Tocqueville

ERIC Educational Resources Information Center

Centellas, Miguel

2010-01-01

This article discusses the use of pop culture in the classroom as a means to teach foundational political science authors and concepts. I focus on my experience using "American Idol" as a point of reference to discuss Marx and Engel's "The Communist Manifesto" and Tocqueville's "Democracy in America" in undergraduate comparative politics courses.…

The Educator Needs to Be Educated: Reflections on the Political Pedagogy of Marx, Lenin and Habermas

ERIC Educational Resources Information Center

Welton, Michael R.

2014-01-01

This essay examines one of the most intractable pedagogical problems of the Marxian revolutionary tradition: who will educate the educator and how ought the learning process to proceed. The solutions of Marx, Lenin and Habermas are critically examined towards the clarification of the emancipatory learning process. This learning process has three…

Kant or Marx? Philosophy and the Origins of Social Science.

ERIC Educational Resources Information Center

Scaff, Lawrence A.

The origins of social science as a discipline are analyzed in terms of the German scientific community before 1920, which tended to define itself according to the theories of Karl Marx or Immanuel Kant. Following a brief introduction about the nature of social science debates in intellectual Germany, section 2 of the paper considers whether the…

Marx and Foucault: Subjectivity, Employability and the Crisis of Youth Unemployment in the Great Global Recession

ERIC Educational Resources Information Center

Peters, Michael A.; Besley, Tina

2013-01-01

This article explores the different approaches taken to the concepts of work or labour by Marx and Foucault, examining in particular the question of subjectivity in relation to youth unemployment and the current crisis of youth unemployment as part of the aftermath of the global recession of 2008.

[Management of functional sterility using clomiphene and cyclophenyl at the Karl-Marx-Stadt District Hospital Gynecologic Clinic].

PubMed

Neubert, S; Melzer, H

1977-01-01

We report on 39 barren patients suffering from anovulatory cycle disturbances or corpus luteum inadequacies. Them were given treatment in the Gynecological Hospital of Karl-Marx-Stadt County at Karl-Marx-Stadt in the past few years and were administered Clomiphendihydrogencitrate or Cyclophenyl to provoke ovulation. Before and during therapy, the total of estrogenes and pregnanediol were determined in the 24h-urine every two days. The clinical data and the results of the hormone investigations were analysed, and an attempt was made to derive a forecast from the estrogene and pregnanediol secretion so as to be able to form an opinion on the positive or negative result of the treatment.

Modeling Stochastic Kinetics of Molecular Machines at Multiple Levels: From Molecules to Modules

PubMed Central

Chowdhury, Debashish

2013-01-01

A molecular machine is either a single macromolecule or a macromolecular complex. In spite of the striking superficial similarities between these natural nanomachines and their man-made macroscopic counterparts, there are crucial differences. Molecular machines in a living cell operate stochastically in an isothermal environment far from thermodynamic equilibrium. In this mini-review we present a catalog of the molecular machines and an inventory of the essential toolbox for theoretically modeling these machines. The tool kits include 1), nonequilibrium statistical-physics techniques for modeling machines and machine-driven processes; and 2), statistical-inference methods for reverse engineering a functional machine from the empirical data. The cell is often likened to a microfactory in which the machineries are organized in modular fashion; each module consists of strongly coupled multiple machines, but different modules interact weakly with each other. This microfactory has its own automated supply chain and delivery system. Buoyed by the success achieved in modeling individual molecular machines, we advocate integration of these models in the near future to develop models of functional modules. A system-level description of the cell from the perspective of molecular machinery (the mechanome) is likely to emerge from further integrations that we envisage here. PMID:23746505

From Commodity Production to Sign Production: A Triple Triangle Model for Marx's Semiotics and Peirce's Economics.

ERIC Educational Resources Information Center

Kim, Joohoan

Using the viewpoint of semiotics, this paper "re-reads" Karl Marx's labor theory of value and suggests a "triple triangle" model for commodity production and shows how this model could be a model for semiosis in general. The paper argues that there are three advantages to considering homogeneity of the sign production and the…

Max Weber's Contribution to the Sociology of Education: A Critical Appreciation

ERIC Educational Resources Information Center

Rao, S. Srinivasa; Singh, Smriti

2018-01-01

Karl Emil Maximilian Weber (1864-1920), more widely known as Max Weber, is credited with numerous contributions to modern sociology and is considered one of the pillars of the discipline along with Karl Marx and Emile Durkheim. Marx (1818-1883) was an established predecessor from Germany whose study of the nineteenth-century European society was…

Toward a Political Economic Theory of Education: Use and Exchange Values of Enhanced Labor Power

ERIC Educational Resources Information Center

Williams, Julian

2011-01-01

I explore theoretical conceptions of the use and exchange values of mathematics education within cultural-historical activity theory perspectives. The case of education in England is compared with that of health care (due to Engestrom). Then I draw on Lave and McDermott's study of estranged learning from the early Marx, and from Marx's later…

Southeast Asian Space Programs: Motives, Cooperation, and Competition

DTIC Science & Technology

2014-09-01

LEO low Earth orbit MTCR Missile Technology Control Regime NAMRIA National Mapping and Resource Information Authority NASA National Aeronautics and...Technology’s role 27 Leo Marx and Merritt Roe Smith, “Introduction,” in Does Technology Drive History: The...Dilemma of Technological Determinism, ed. Merritt Roe Smith and Leo Marx (Cambridge, MA: The MIT Press, 1994), xii. 28 Donald MacKenzie and Judy

Specificities of Sightseeing Foot Tour Arrangement for History Related Street with Regard to Karl Marx Street in the Town of Irkutsk

NASA Astrophysics Data System (ADS)

Kulakov, A. I.; Shishkanov, V. S.

2017-11-01

The paper is devoted to the preparation of an innovative foot itinerary for tourists in Karl Marx Street in the town of Irkutsk. Methodology on preparation of sightseeing tours has been analysed by the authors. The analysis of the methodology has facilitated selecting the criteria to classify the excursions as well as the criteria for assessing and shortlisting the objects for excursion exposure. Some chosen criteria being used in tour arrangement and certain specificities of tour preparation have been revealed which are characteristic particularly for Karl Marx Street as a history-related one. It is also proved in the paper that the itinerary prepared for tourists is in full correspondence with the key innovation objectives in tourism.

Modeling stochastic kinetics of molecular machines at multiple levels: from molecules to modules.

PubMed

Chowdhury, Debashish

2013-06-04

A molecular machine is either a single macromolecule or a macromolecular complex. In spite of the striking superficial similarities between these natural nanomachines and their man-made macroscopic counterparts, there are crucial differences. Molecular machines in a living cell operate stochastically in an isothermal environment far from thermodynamic equilibrium. In this mini-review we present a catalog of the molecular machines and an inventory of the essential toolbox for theoretically modeling these machines. The tool kits include 1), nonequilibrium statistical-physics techniques for modeling machines and machine-driven processes; and 2), statistical-inference methods for reverse engineering a functional machine from the empirical data. The cell is often likened to a microfactory in which the machineries are organized in modular fashion; each module consists of strongly coupled multiple machines, but different modules interact weakly with each other. This microfactory has its own automated supply chain and delivery system. Buoyed by the success achieved in modeling individual molecular machines, we advocate integration of these models in the near future to develop models of functional modules. A system-level description of the cell from the perspective of molecular machinery (the mechanome) is likely to emerge from further integrations that we envisage here. Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Methods, systems and apparatus for controlling operation of two alternating current (AC) machines

DOEpatents

Gallegos-Lopez, Gabriel [Torrance, CA; Nagashima, James M [Cerritos, CA; Perisic, Milun [Torrance, CA; Hiti, Silva [Redondo Beach, CA

2012-02-14

A system is provided for controlling two AC machines. The system comprises a DC input voltage source that provides a DC input voltage, a voltage boost command control module (VBCCM), a five-phase PWM inverter module coupled to the two AC machines, and a boost converter coupled to the inverter module and the DC input voltage source. The boost converter is designed to supply a new DC input voltage to the inverter module having a value that is greater than or equal to a value of the DC input voltage. The VBCCM generates a boost command signal (BCS) based on modulation indexes from the two AC machines. The BCS controls the boost converter such that the boost converter generates the new DC input voltage in response to the BCS. When the two AC machines require additional voltage that exceeds the DC input voltage required to meet a combined target mechanical power required by the two AC machines, the BCS controls the boost converter to drive the new DC input voltage generated by the boost converter to a value greater than the DC input voltage.

Design of robotic cells based on relative handling modules with use of SolidWorks system

NASA Astrophysics Data System (ADS)

Gaponenko, E. V.; Anciferov, S. I.

2018-05-01

The article presents a diagramed engineering solution for a robotic cell with six degrees of freedom for machining of complex details, consisting of the base with a tool installation module and a detail machining module made as parallel structure mechanisms. The output links of the detail machining module and the tool installation module can move along X-Y-Z coordinate axes each. A 3D-model of the complex is designed in the SolidWorks system. It will be used further for carrying out engineering calculations and mathematical analysis and obtaining all required documentation.

Teaching Strategies: Self-Created Children's Literature as a Teaching Strategy--Voices from the College and the Elementary Classroom

ERIC Educational Resources Information Center

Szilagyi, Janka; Zarazinski, Jill

2012-01-01

Researchers have noticed a shift in education, with science and social studies taking a backseat to mathematics and literacy (Marx & Harris, 2006; Rodriguez, 2006). Some school districts are operating on a rotating basis with science instruction--one month on and one month off (Marx & Harris, 2006). A better approach would be to encourage students…

[Development, problems and results of specialty-specific genetic counseling at the Neurology Clinic of the Karl Marx University].

PubMed

Bachmann, H

1987-11-01

Genetic counselling for inherited neurological diseases has been established at the Clinic for Neurology of Karl Marx University. Comprehensive experiences have been got with the specific and sometimes markedly different problems and aims of counselling in Wilsons disease, X-linked recessive muscular dystrophies, myotonic dystrophy and other neuromuscular disorders, Huntingtons chorea and hereditary ataxias.

Karl Marx in One Lesson (1818-1883). Series on Public Issues No. 6.

ERIC Educational Resources Information Center

Pejovich, Steve

This booklet, one of a series intended to apply economic principles to major social and political issues of the day, starts from the premise that Marxism is a threat to our way of life and offers a critique of fundamental components of the social movement Marx created. The first of six subsections focuses on sources of influence on Karl Marx…

Developmental Stages in School Computer Use: Neither Marx Nor Piaget.

ERIC Educational Resources Information Center

Lengel, James G.

Karl Marx's theory of stages can be applied to computer use in the schools. The first stage, the P Stage, comprises the entry of the computer into the school. Computer use at this stage is personal and tends to center around one personality. Social studies teachers are seldom among this select few. The second stage of computer use, the D Stage, is…

Discussion of "Computational Electrocardiography: Revisiting Holter ECG Monitoring".

PubMed

Baumgartner, Christian; Caiani, Enrico G; Dickhaus, Hartmut; Kulikowski, Casimir A; Schiecke, Karin; van Bemmel, Jan H; Witte, Herbert

2016-08-05

This article is part of a For-Discussion-Section of Methods of Information in Medicine about the paper "Computational Electrocardiography: Revisiting Holter ECG Monitoring" written by Thomas M. Deserno and Nikolaus Marx. It is introduced by an editorial. This article contains the combined commentaries invited to independently comment on the paper of Deserno and Marx. In subsequent issues the discussion can continue through letters to the editor.

MARXS: A Modular Software to Ray-trace X-Ray Instrumentation

NASA Astrophysics Data System (ADS)

Günther, Hans Moritz; Frost, Jason; Theriault-Shay, Adam

2017-12-01

To obtain the best possible scientific result, astronomers must understand the properties of the available instrumentation well. This is important both when designing new instruments and when using existing instruments close to the limits of their specified capabilities or beyond. Ray-tracing is a technique for numerical simulations where the path of many light rays is followed through the system to understand how individual system components influence the observed properties, such as the shape of the point-spread-function. In instrument design, such simulations can be used to optimize the performance. For observations with existing instruments, this helps to discern instrumental artefacts from a true signal. Here, we describe MARXS, a new python package designed to simulate X-ray instruments on satellites and sounding rockets. MARXS uses probability tracking of photons and has polarimetric capabilities.

Stationary Engineers Apprenticeship. Related Training Modules. 10.1-10.5 Machine Components.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This packet of five learning modules on machine components is one of 20 such packets developed for apprenticeship training for stationary engineers. Introductory materials are a complete listing of all available modules and a supplementary reference list. Each module contains some or all of these components: goal, performance indicators, statement…

[Development of child neuropsychiatry at the Karl Marx University of Leipzig].

PubMed

Gebelt, H

1978-05-01

The development of pedoneuropsychiatry at the University of Leipzig is marked by the opening in 1926 of the first "Department of Pedopsychiatric Observation", the establishment of the Clinic of Pedoneuropsychiatry as an independent unit of the Department of Medicine, Karl Marx University, and the setting up in 1976 of a Chair of Pedoneuropsychiatry. Paul Schröder's and R. A. Pfeifer's services to their university are particularly appreciated.

USSR Report, International Affairs.

DTIC Science & Technology

1986-07-18

the overall struggle for the liberation of the working class ( K . Marx, F. Engels, "Sochineniya" [Works], Volume 16, p 11). Today this aspect of...Production and Economic Combine for the manu- facture of robots (Stara Zagora). According to K . Marx, "...cooperation—above all means direct—not...the CEMA Commonwealth], Moscow, 1984, p 66. 7. We should note here that the opinion of the Hungarian economist K . Pechi, who distinguishes the two

On Intelligent Design and Planning Method of Process Route Based on Gun Breech Machining Process

NASA Astrophysics Data System (ADS)

Hongzhi, Zhao; Jian, Zhang

2018-03-01

The paper states an approach of intelligent design and planning of process route based on gun breech machining process, against several problems, such as complex machining process of gun breech, tedious route design and long period of its traditional unmanageable process route. Based on gun breech machining process, intelligent design and planning system of process route are developed by virtue of DEST and VC++. The system includes two functional modules--process route intelligent design and its planning. The process route intelligent design module, through the analysis of gun breech machining process, summarizes breech process knowledge so as to complete the design of knowledge base and inference engine. And then gun breech process route intelligently output. On the basis of intelligent route design module, the final process route is made, edited and managed in the process route planning module.

Modular support blocks for fluid lines

NASA Technical Reports Server (NTRS)

Dimino, J. M.; Deskin, R. D.

1974-01-01

Modular line block comprises matched modular elements machined to accept fluid lines of different diameters. Modules can support different fluid-line configurations. Top and bottom surfaces are machined to accept dovetail strip used for holding modules together. End modules have holes drilled through to accept fastening screws.

Annotations to D.B. Herrmann's contribution ``On Albert Einstein's political views'' (German Title: Anmerkungen zu D.B. Herrmanns Beitrag ``Über Albert Einsteins politische Ansichten'')

NASA Astrophysics Data System (ADS)

Grundmann, Siegfried

Referring to the Straus-Herrmann correspondence, we deal only with one aspect of the ``political Einstein'': his attitude towards Marx, Engels, Lenin and Stalin (who were in the past sometimes called the ``classics of Marxism-Leninism''). Einstein revered Marx, but condemned Stalin as a criminal. He also resisted attempts to be misused by representatives of ``dialectic materialism''.

Pulsed Corona Discharge Generated By Marx Generator

NASA Astrophysics Data System (ADS)

Sretenovic, G. B.; Obradovic, B. M.; Kovacevic, V. V.; Kuraica, M. M.; Puric J.

2010-07-01

The pulsed plasma has a significant role in new environmental protection technologies. As a part of a pulsed corona system for pollution control applications, Marx type repetitive pulse generator was constructed and tested in arrangement with wire-plate corona reactor. We performed electrical measurements, and obtained voltage and current signals, and also power and energy delivered per pulse. Ozone formation by streamer plasma in air was chosen to monitor chemical activity of the pulsed corona discharge.

[Experiences and results in hypertension screening in women between 20 and 65 years of age in Karl-Marx-City].

PubMed

Voigt, G; Börker, G; Edelmann, S; Hartung, A; Hartung, G; Heyne, S; Töpfer, V

1980-11-15

From 1975 to 1979 in the district of the City of Karl-Marx-Stadt 91,130 females at the age between 20 and 65 years were summoned to a gynaecologico-cardiological mass examination which was supported by computer. 56,460 females underwent the examination. According to the WHO-criteria two measurements of blood pressure were carried out, when increased blood pressure was present a third one and a fourth one by an examination group. A diagnostic standard programme was used. In the second measurement of blood pressure we established 19.8% of patients with hypertension and 28.6% patients with borderline values. 52.8% of the hypertensions were known. Of 10,685 females with known or established hypertension 10.1% underwent an optimum therapy. On the basis of these results a programme for the fight against hypertension was developed for the county Karl-Marx-Stadt.

Science and worldviews in the marxist tradition

NASA Astrophysics Data System (ADS)

Skordoulis, C. D.

2008-06-01

This paper is about the relationship between Marxism, Science and Worldviews. In Section I, the paper gives a descriptive definition of the scientific viewpoint based on a materialist ontology, a realist epistemology, and the recognition that science is a social activity. The paper shows in Section II that there are currents in contemporary Marxism which relate favourably to science. In Section III, the paper examines Marx's encounter with Natural Philosophy and Materialism by analysing the influence of Epicurus on Marx. Section IV examines Marx's positive attitude towards natural science. Section V discusses the relation between science and ideology and proposes a scheme to defend the thesis that science establishes a conceptual autonomy from the forms of social consciousness existing in the social formation. Finally Section VI examines the historical infusion of Marxism into the Western scientific community in the 1930s, and the positions adopted by Marxists when they have considered science education.

Coupled gating of skeletal muscle ryanodine receptors is modulated by Ca2+, Mg2+, and ATP

PubMed Central

Porta, Maura; Diaz-Sylvester, Paula L.; Neumann, Jake T.; Escobar, Ariel L.; Fleischer, Sidney

2012-01-01

Coupled gating (synchronous openings and closures) of groups of skeletal muscle ryanodine receptors (RyR1), which mimics RyR1-mediated Ca2+ release underlying Ca2+ sparks, was first described by Marx et al. (Marx SO, Ondrias K, Marks AR. Science 281: 818–821, 1998). The nature of the RyR1-RyR1 interactions for coupled gating still needs to be characterized. Consequently, we defined planar lipid bilayer conditions where ∼25% of multichannel reconstitutions contain mixtures of coupled and independently gating RyR1. In ∼10% of the cases, all RyRs (2–10 channels; most frequently 3–4) gated in coupled fashion, allowing for quantification. Our results indicated that coupling required cytosolic solutions containing ATP/Mg2+ and high (50 mM) luminal Ca2+ (Calum) or Sr2+ solutions. Bursts of coupled activity (events) started and ended abruptly, with all channels activating/deactivating within ∼300 μs. Coupled RyR1 were heterogeneous, where highly active RyR1 (“drivers”) seemed open during the entire coupled event (Po = 1), while other RyR1s (“followers”) displayed abundant flickering and smaller amplitude. Drivers mean open time increased with cytosolic Ca2+ (Cacyt) or caffeine, whereas followers flicker frequency was Cacyt independent and more sensitive to inhibition by cytosolic Mg2+. Coupled events were insensitive to varying lumen-to-cytosol Ca2+ fluxes from ∼1 to 8 pA, which does not corroborate coupling of neighboring RyR1 by local Ca2+-induced Ca2+ release. However, coupling requires specific Calum sites, as it was lost when Calum was replaced by luminal Ba2+ or Mg2+. In summary, coupled events reveal complex interactions among heterogeneous RyR1, differentially modulated by cytosolic ATP/Mg2+, Cacyt, and Calum, which under cell-like ionic conditions may parallel synchronous RyR1 gating during Ca2+ sparks. PMID:22785120

Human Machine Learning Symbiosis

ERIC Educational Resources Information Center

Walsh, Kenneth R.; Hoque, Md Tamjidul; Williams, Kim H.

2017-01-01

Human Machine Learning Symbiosis is a cooperative system where both the human learner and the machine learner learn from each other to create an effective and efficient learning environment adapted to the needs of the human learner. Such a system can be used in online learning modules so that the modules adapt to each learner's learning state both…

Development of Learning Modules for Machine Shop Occupations. Final Report.

ERIC Educational Resources Information Center

Kent, Randall

This final report contains an eight-page narrative and materials/products of a program to produce (the final) sixty-eight individualized machine shop skill tasks modules (and fifty-two master audio tapes for students with serious reading disabilities). The narrative also describes the determination of the vital few skills used by machine tool…

Satellite antenna management system and method

NASA Technical Reports Server (NTRS)

Leath, Timothy T (Inventor); Azzolini, John D (Inventor)

1999-01-01

The antenna management system and method allow a satellite to communicate with a ground station either directly or by an intermediary of a second satellite, thus permitting communication even when the satellite is not within range of the ground station. The system and method employ five major software components, which are the control and initialization module, the command and telemetry handler module, the contact schedule processor module, the contact state machining module, and the telemetry state machine module. The control and initialization module initializes the system and operates the main control cycle, in which the other modules are called. The command and telemetry handler module handles communication to and from the ground station. The contact scheduler processor module handles the contact entry schedules to allow scheduling of contacts with the second satellite. The contact and telemetry state machine modules handle the various states of the satellite in beginning, maintaining and ending contact with the second satellite and in beginning, maintaining and ending communication with the satellite.

Millwright Apprenticeship. Related Training Modules. 5.1-5.16 Drafting.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This packet, part of the instructional materials for the Oregon apprenticeship program for millwright training, contains 16 modules covering drafting. The modules provide information on the following topics: types of drawing and views, sketching, blueprint reading/working drawings, working drawings for machines and welding, machine and welding…

High pressure water jet mining machine

DOEpatents

Barker, Clark R.

1981-05-05

A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

USSR Report, Translations from Kommunist, No. 5, March 1983

DTIC Science & Technology

1983-06-14

such as Say, Ricardo, Mill and Malthus, whose theories he began to study at that time. Marx began systematic work on problems of political economy...ones. Boisguillebert was one of the founders of the labor theory of value. He believed that the appearance of money distorted the true nature of...34 The attention Marx paid to this problem confirms his interest in the theory of value. He set a high value to Boisguillebert’s contribution to the

Instantly Basing Locust Swarms: New Options for Future Air Operations

DTIC Science & Technology

2012-06-01

force’s fighting potential.”51 Moreover, JP 3-0 specifically emphasizes “Securing and protecting forces, bases, JSAs [Joint Storage Areas], and LOCs ...Smith and Leo Marx (Cambridge, MA: The MIT Press, 1994), 101-113. 64 Hughes, “Technological Momentum,”108. 65 John Law, "Technology and Heterogeneous...Technology Drive History?, edited by Merritt Roe Smith and Leo Marx, 101-113. Cambridge, MA: The MIT Press, 1994. Jean, Grace V. "Remotely Piloted

Computer Programmed Milling Machine Operations. High-Technology Training Module.

ERIC Educational Resources Information Center

Leonard, Dennis

This learning module for a high school metals and manufacturing course is designed to introduce the concept of computer-assisted machining (CAM). Through it, students learn how to set up and put data into the controller to machine a part. They also become familiar with computer-aided manufacturing and learn the advantages of computer numerical…

Machine Shop. Module 1: Machine Shop Orientation and Math. Instructor's Guide.

ERIC Educational Resources Information Center

Curtis, Donna; Nobles, Jack

This document consists of materials for a six-unit course on employment in the machine shop setting, safety, basic math skills, geometric figures and forms, math applications, and right triangles. The instructor's guide begins with a list of competencies covered in the module, descriptions of the materials included, an explanation of how to use…

Population Analysis: A Methodology for Understanding Populations in COIN Environments

DTIC Science & Technology

2008-12-01

Psychology is also known for its controversy. Theories such as those of Sigmund Freud and Abraham Maslow remain controversial, and have clouded the...from the Freud’s concept of the id and ego to Marx concept of class struggles ( Freud , 1923) (Marx, 1847). For the purpose of this thesis, we have...8217The bases of social power,’ in D. Cartwright (ed.) Studies in Social Power. Ann Arbor. Freud , S. (1923). The Ego and the Id, Joan Riviere (trans

PeoplePersonality: Chris Clarke - a physicist who studies ice cream Teaching Anecdotes: Annie Jump Cannon Obituary: György Marx 1927-2002 Starting Out: What Katie did next: part 3 Opinions: What is really important?

NASA Astrophysics Data System (ADS)

2003-03-01

Featuring relationships, personalities, interactions, environments and reputations involved in physics and education PERSONALITY (156) Chris Clarke - a physicist who studies ice cream TEACHING ANECDOTES (157) Annie Jump Cannon OBITUARY (158) György Marx 1927-2002 Steven Chapman STARTING OUT (159) What Katie did next: part 3 Katie Pennicott OPINIONS (160) What is really important? Kerry Parker

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2017-10-01

Implications for ICD–11. Journal Of Abnormal Psychology , 126(3), 355- 366. doi:10.1037/abn0000252 PRESENTATIONS Black, S.K., Harwell, A.M., Klein, A.B...mental health in a nationally representative sample of U.S. OEF/OIF veterans. Journal of Abnormal Psychology , 120, 797– 806. http://dx .doi.org...Marx, 150 South Huntington Avenue (116B-3), Boston, MA 02130. E-mail: Karen.Mitchell5@va.gov or Brian.Marx@va.gov Journal of Abnormal Psychology In

Project VALOR: Trajectories of Change in PTSD in Combat Exposed Veterans

DTIC Science & Technology

2016-10-01

comparison of DSM-5 and ICD-11. Poster to be presented at the Association for Behavioral and Cognitive Therapy 50th Annual Meeting. New York, NY. Black, S...Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Black, S. K., Erb, S. Bovin, M. J., Green, J., Marx, B. P., Rosen, R. C., & Keane, T...for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Erb, S., Kearns, J., Bovin, M. J., Black, S., Annunziata, A., & Marx, B. P

The East German Research Landscape in Transition Part A: Status and Transition

DTIC Science & Technology

1993-03-02

traditional Meteorologisches Observatorium Potsdam, and Prof. Siegfried Marx of the Karl - Schwarzschild -Observatorium Tautenburg. G804L32-00-01 07 APR...Telefax: +37 (091) 53409 or 51959 The Ministry is on Breiter Weg (the former Karl -Marx StraBe) north of Wilhelm Pieck Allee, near Alter Markt. Non...27 69 Karl StraBe 4 D/W-6900 Heidelberg Telephone: +49 (6221) 54-3265 Telefax: +49 (6221) 54-3355 Akademie der Wissenschaften und der Literatur Mainz

Study on Decomposition of Indoor Air Contaminants by Pulsed Atmospheric Microplasma

PubMed Central

Shimizu, Kazuo; Kuwabara, Tomoya; Blajan, Marius

2012-01-01

Decomposition of formaldehyde (HCHO) by a microplasma reactor in order to improve Indoor Air Quality (IAQ) was achieved. HCHO was removed from air using one pass through reactor treatment (5 L/min). From an initial concentration of HCHO of 0.7 ppm about 96% was removed in one pass treatment using a discharge power of 0.3 W provided by a high voltage amplifier and a Marx Generator with MOSFET switches as pulsed power supplies. Moreover microplasma driven by the Marx Generator did not generate NOx as detected by a chemiluminescence NOx analyzer. In the case of large volume treatment the removal ratio of HCHO (initial concentration: 0.5 ppm) after 60 minutes was 51% at 1.2 kV when using HV amplifier considering also a 41% natural decay ratio of HCHO. The removal ratio was 54% at 1.2 kV when a Marx Generator energized the electrodes with a 44% natural decay ratio after 60 minutes of treatment. PMID:23202173

Automated Composites Processing Technology: Film Module

NASA Technical Reports Server (NTRS)

Hulcher, A. Bruce

2004-01-01

NASA's Marshall Space Flight Center (MSFC) has developed a technology that combines a film/adhesive laydown module with fiber placement technology to enable the processing of composite prepreg tow/tape and films, foils or adhesives on the same placement machine. The development of this technology grew out of NASA's need for lightweight, permeation-resistant cryogenic propellant tanks. Autoclave processing of high performance composites results in thermally-induced stresses due to differences in the coefficients of thermal expansion of the fiber and matrix resin components. These stresses, together with the reduction in temperature due to cryogen storage, tend to initiate microcracking within the composite tank wall. One way in which to mitigate this problem is to introduce a thin, crack-resistant polymer film or foil into the tank wall. Investigation into methods to automate the processing of thin film or foil materials into composites led to the development of this technology. The concept employs an automated film supply and feed module that may be designed to fit existing fiber placement machines, or may be designed as integral equipment to new machines. This patent-pending technology can be designed such that both film and foil materials may be processed simultaneously, leading to a decrease in part build cycle time. The module may be designed having a compaction device independent of the host machine, or may utilize the host machine's compactor. The film module functions are controlled by a dedicated system independent of the fiber placement machine controls. The film, foil, or adhesive is processed via pre-existing placement machine run programs, further reducing operational expense.

Mathematics for the Workplace. Applications from Machine Tool Technology (Michelin Tire Corporation). A Teacher's Guide.

ERIC Educational Resources Information Center

Wallace, Johnny M.; Stewart, Grover

This module presents a real-world context in which mathematics skills (geometry and trigonometry) are used as part of a daily routine. The context is the machine tool technology field, and the module aims to help students develop the ability to analyze diagrams in order to make mathematical computations. The modules, which features applications…

Design of a Radiographic Integrated Test Stand (RITS) Based on a Voltage Adder, To Drive a Diode Immersed in a High Magnetic Field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, V.L.; Corcoran, P.; Droemer, D.

Recent experiments (1) have adapted existing magne-tically insulated induction voltage adders (Sabre, Hermes III) to drive a 10 MV diode immersed in magnetic fields as high as 50 T. In such a diode, an electron beam of tens of kA can be confined by the magnetic field to a diameter of about 1 mm, and when it strikes a high-Z anode it can create a bremsstrahlung x-ray source intense enough to radiograph massive objects with high resolution. RITS is an adder system designed specially to drive such diodes, and it will be used to develop and exploit them. As inmore » other adder-based pulsers such as Sabre, Hermes III, and Kalif-Heliq the induction cells have amorphous- iron cores, and the pulse-forming system consists of water dielectric pulse lines and self-closing water switches that are pulse-charged from Marx-charged intermediate water capacitors through laser-triggered Rimfire switches. An oil prepulse switch in series with each pulse line is designed to reduce cathode prepulse to less than ± 5 kV, and a means is provided to bias the cathode and avoid negative prepulse entirely. The RITS pulse-forming system consists of two modules. Each module has one Marx that charges two 3 MV intermediate stores, each of which charges three 7.8 ohm pulselines, making six pulselines per module. The two modules in concert can supply 1.35 MV, 50 ns pulses to a twelve-cell adder and thus drive a 16 MV diode with a single pulse. The 1.35 MV induction cells each have a single-point feed, from which a single, slotted azimuthal oil transmission line distributes energy uniformly around the cell. The modules can also be pulsed separately at different times, either to power two 8 MV adders that each drive one of two closely-spaced cathodes immersed in a common magnetic field, or to provide two separate pulses to a common six- cell adder and a single 8 NIV diode; in these two-pulse modes, the spacing of the two 50 ns pulses may be chosen to be anything from a few hundred ns upward. The use of only one pulse line per cell has been shown to increase the extent to which the cell voltages can vary with the timing of closure of the water switches. This and all other functions of RITS have been simulated in detail, and a conservative electrical design has been developed. This will be illustrated, along with the conceptual design of a pulse-sorting network that can couple two pulselines efilciently to one cell when the two RITS modules drive a common adder in two-pulse mode.« less

Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment

PubMed Central

Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S.; Phoon, Sin Ye

2016-01-01

This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively. PMID:27271840

Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment.

PubMed

Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S; Phoon, Sin Ye

2016-06-07

This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.

Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment

NASA Astrophysics Data System (ADS)

Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S.; Phoon, Sin Ye

2016-06-01

This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.

Transmission-line-circuit model of an 85-TW, 25-MA pulsed-power accelerator

NASA Astrophysics Data System (ADS)

Hutsel, B. T.; Corcoran, P. A.; Cuneo, M. E.; Gomez, M. R.; Hess, M. H.; Hinshelwood, D. D.; Jennings, C. A.; Laity, G. R.; Lamppa, D. C.; McBride, R. D.; Moore, J. K.; Myers, A.; Rose, D. V.; Slutz, S. A.; Stygar, W. A.; Waisman, E. M.; Welch, D. R.; Whitney, B. A.

2018-03-01

We have developed a physics-based transmission-line-circuit model of the Z pulsed-power accelerator. The 33-m-diameter Z machine generates a peak electrical power as high as 85 TW, and delivers as much as 25 MA to a physics load. The circuit model is used to design and analyze experiments conducted on Z. The model consists of 36 networks of transmission-line-circuit elements and resistors that represent each of Zs 36 modules. The model of each module includes a Marx generator, intermediate-energy-storage capacitor, laser-triggered gas switch, pulse-forming line, self-break water switches, and tri-plate transmission lines. The circuit model also includes elements that represent Zs water convolute, vacuum insulator stack, four parallel outer magnetically insulated vacuum transmission lines (MITLs), double-post-hole vacuum convolute, inner vacuum MITL, and physics load. Within the vacuum-transmission-line system the model conducts analytic calculations of current loss. To calculate the loss, the model simulates the following processes: (i) electron emission from MITL cathode surfaces wherever an electric-field threshold has been exceeded; (ii) electron loss in the MITLs before magnetic insulation has been established; (iii) flow of electrons emitted by the outer-MITL cathodes after insulation has been established; (iv) closure of MITL anode-cathode (AK) gaps due to expansion of cathode plasma; (v) energy loss to MITL conductors operated at high lineal current densities; (vi) heating of MITL-anode surfaces due to conduction current and deposition of electron kinetic energy; (vii) negative-space-charge-enhanced ion emission from MITL anode surfaces wherever an anode-surface-temperature threshold has been exceeded; and (viii) closure of MITL AK gaps due to expansion of anode plasma. The circuit model is expected to be most accurate when the fractional current loss is small. We have performed circuit simulations of 52 Z experiments conducted with a variety of accelerator configurations and load-impedance time histories. For these experiments, the apparent fractional current loss varies from 0% to 20%. Results of the circuit simulations agree with data acquired on 52 shots to within 2%.

Dose Analysis of the Model 112A Pulserad Pulsed X-Ray Generator by Its Cyltran

DTIC Science & Technology

1989-12-01

field was performed by R. B. Pietruszka [Ref. 1] using the dosimetry system which consists of Thermoluminescent Dosimeter ( TLD ) and associated TLD ...has the same pattern at a specific angle of the dominant electron flow. For a Marx charge of 75 kV, Figure 18 shows the absorbed dose in TLD normalized... Electron energy (1.66 MeV to 0.05 MeV) 3 materials 56 minutes 45 minutes (Ta, Al, TLD ) 68 APPENDIX F. MEASURED EXPOSURE VARIATION Marx Charge 75 kV

Low Speed Control for Automatic Welding

NASA Technical Reports Server (NTRS)

Iceland, W. E.

1982-01-01

Amplifier module allows rotating positioner of automatic welding machine to operate at speeds below normal range. Low speeds are precisely regulated by a servomechanism as are normal-range speeds. Addition of module to standard welding machine makes it unnecessary to purchase new equipment for low-speed welding.

High speed turning of compacted graphite iron using controlled modulation

NASA Astrophysics Data System (ADS)

Stalbaum, Tyler Paul

Compacted graphite iron (CGI) is a material which emerged as a candidate material to replace cast iron (CI) in the automotive industry for engine block castings. Its thermal and mechanical properties allow the CGI-based engines to operate at higher cylinder pressures and temperatures than CI-based engines, allowing for lower fuel emissions and increased fuel economy. However, these same properties together with the thermomechanical wear mode in the CGI-CBN system result in poor machinability and inhibit CGI from seeing wide spread use in the automotive industry. In industry, machining of CGI is done only at low speeds, less than V = 200 m/min, to avoid encountering rapid wear of the cutting tools during cutting. Studies have suggested intermittent cutting operations such as milling suffer less severe tool wear than continuous cutting. Furthermore, evidence that a hard sulfide layer which forms over the cutting edge in machining CI at high speeds is absent during machining CGI is a major factor in the difference in machinability of these material systems. The present study addresses both of these issues by modification to the conventional machining process to allow intermittent continuous cutting. The application of controlled modulation superimposed onto the cutting process -- modulation-assisted machining (MAM) -- is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining CGI at high machining speeds (> 500 m/min). The tool life is at least 20 times greater than found in conventional machining of CGI. This significant reduction in wear is a consequence of reduction in the severity of the tool-work contact conditions with MAM. The propensity for thermochemical wear of CBN is thus reduced. It is found that higher cutting speed (> 700 m/min) leads to lower tool wear with MAM. The MAM configuration employing feed-direction modulation appears feasible for implementation at high speeds and offers a solution to this challenging class of industrial machining applications. This study's approach is by series of high speed turning tests of CGI with CBN tools, comparing conventional machining to MAM for similar parameters otherwise, by tool wear measurements and machinability observations.

“Coffee Ring Effect” in Ophthalmology

PubMed Central

Rajabi, Mohammad Taher; Sharifzadeh, Morteza

2016-01-01

Abstract The process of formation of Marx line is studied in this article. Various theories have been proposed previously, in order to explain the mechanisms which lead to the development of Marx line. These theories are based on the characteristics of stained area and do not pay attention to the behavior of dye solution itself on the surface. The aim of this study is to investigate the latter behavior and introduce a new theory based on it, in order to explain the process of the Marx line formation. This study also introduces “Coffee Ring Effect” and its possible applications in explaining some ophthalmological phenomena. The effect of dye solution's behavior on the beneath surface is adopted in order to propose a novel theory. This new hypothesis is called “Anionic Dye Deposition” which was based on “Coffee Ring Effect” phenomenon. For evaluation of this theory, Evaporation pattern of Rose Bengal and fluorescein were analyzed on different surfaces. Furthermore, the effect of tear meniscus alteration on lid margin staining is studied. During the evaporation process of dye solutions, it was observed that almost all of the solute was deposited at the edge of the drop on hydrophilic surfaces. Furthermore, in the study of lid margin staining, it is observed that tear meniscus alteration during gaze affects staining pattern. This observation invalidates former hypotheses which only focus on stained surface characteristics. According to the observations in this study, it is proposed that Marx line staining occurs as a result of “anionic dye deposition” due to evaporation. PMID:27057835

Methods, systems and apparatus for controlling third harmonic voltage when operating a multi-space machine in an overmodulation region

DOEpatents

Perisic, Milun; Kinoshita, Michael H; Ranson, Ray M; Gallegos-Lopez, Gabriel

2014-06-03

Methods, system and apparatus are provided for controlling third harmonic voltages when operating a multi-phase machine in an overmodulation region. The multi-phase machine can be, for example, a five-phase machine in a vector controlled motor drive system that includes a five-phase PWM controlled inverter module that drives the five-phase machine. Techniques for overmodulating a reference voltage vector are provided. For example, when the reference voltage vector is determined to be within the overmodulation region, an angle of the reference voltage vector can be modified to generate a reference voltage overmodulation control angle, and a magnitude of the reference voltage vector can be modified, based on the reference voltage overmodulation control angle, to generate a modified magnitude of the reference voltage vector. By modifying the reference voltage vector, voltage command signals that control a five-phase inverter module can be optimized to increase output voltages generated by the five-phase inverter module.

The Single Needle Lockstitch Machine. [Constructing Darts.] Module 3.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This module on constructing darts, one in a series on the single needle lockstitch sewing machine for student self-study, contains two sections. Each section includes the following parts: an introduction, directions, an objective, learning activities, student information, student self-check, check-out activities, and an instructor's final…

The Single Needle Lockstitch Machine. [Setting Zippers.] Module 8.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This module on setting zippers, one in a series on the single needle lockstitch sewing machine for student self-study, contains five sections. Each section includes the following parts: an introduction, directions, an objective, learning activities, student information, student self-check, check-out activities, and an instructor's final checklist.…

Machine Shop. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains eight modules for completing a course in machine shop. It is designed especially for use in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities and resources, information sheets, student self-check with answer key,…

All the Missiles Work Technological Dislocations and Military Innovation: A Case Study in US Air Force Air-to-Air Armament, Post-World War II through Operation Rolling Thunder

DTIC Science & Technology

2010-06-01

Scientific Way of Warfare, 136. Bousquet also cited Paul Edwards‘ critique of Westmoreland‘s speech: it ―epitomizes the ‗vision of a closed world, a chaotic...Technology Drive History? The Dilemma of Technological Determinism, eds. Merritt Roe Smith and Leo Marx (Cambridge, MA: The MIT Press, 1994), ―The belief...Books, 1990), 29. 68 Quoted in Merritt Roe Smith, ―Introduction,‖ in Does Technology Drive History, 29. 69 Merritt Roe Smith and Leo Marx

Control and protection system for an installation for the combined production of electrical and thermal energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agazzone, U.; Ausiello, F.P.

1981-06-23

A power-generating installation comprises a plurality of modular power plants each comprised of an internal combustion engine connected to an electric machine. The electric machine is used to start the engine and thereafter operates as a generator supplying power to an electrical network common to all the modular plants. The installation has a control and protection system comprising a plurality of control modules each associated with a respective plant, and a central unit passing control signals to the modules to control starting and stopping of the individual power plants. Upon the detection of abnormal operation or failure of its associatedmore » power plant, each control module transmits an alarm signal back to the central unit which thereupon stops, or prevents the starting, of the corresponding power plant. Parameters monitored by each control module include generated current and inter-winding leakage current of the electric machine.« less

Service Modules for Coal Extraction

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Lewis, E. V.

1985-01-01

Service train follows group of mining machines, paying out utility lines as machines progress into coal face. Service train for four mining machines removes gases and coal and provides water and electricity. Flexible, coiling armored carriers protect cables and hoses. High coal production attained by arraying row of machines across face, working side by side.

Open-source software for collision detection in external beam radiation therapy

NASA Astrophysics Data System (ADS)

Suriyakumar, Vinith M.; Xu, Renee; Pinter, Csaba; Fichtinger, Gabor

2017-03-01

PURPOSE: Collision detection for external beam radiation therapy (RT) is important for eliminating the need for dryruns that aim to ensure patient safety. Commercial treatment planning systems (TPS) offer this feature but they are expensive and proprietary. Cobalt-60 RT machines are a viable solution to RT practice in low-budget scenarios. However, such clinics are hesitant to invest in these machines due to a lack of affordable treatment planning software. We propose the creation of an open-source room's eye view visualization module with automated collision detection as part of the development of an open-source TPS. METHODS: An openly accessible linac 3D geometry model is sliced into the different components of the treatment machine. The model's movements are based on the International Electrotechnical Commission standard. Automated collision detection is implemented between the treatment machine's components. RESULTS: The room's eye view module was built in C++ as part of SlicerRT, an RT research toolkit built on 3D Slicer. The module was tested using head and neck and prostate RT plans. These tests verified that the module accurately modeled the movements of the treatment machine and radiation beam. Automated collision detection was verified using tests where geometric parameters of the machine's components were changed, demonstrating accurate collision detection. CONCLUSION: Room's eye view visualization and automated collision detection are essential in a Cobalt-60 treatment planning system. Development of these features will advance the creation of an open-source TPS that will potentially help increase the feasibility of adopting Cobalt-60 RT.

Optical wireless communications for micromachines

NASA Astrophysics Data System (ADS)

O'Brien, Dominic C.; Yuan, Wei Wen; Liu, Jing Jing; Faulkner, Grahame E.; Elston, Steve J.; Collins, Steve; Parry-Jones, Lesley A.

2006-08-01

A key challenge for wireless sensor networks is minimizing the energy required for network nodes to communicate with each other, and this becomes acute for self-powered devices such as 'smart dust'. Optical communications is a potentially attractive solution for such devices. The University of Oxford is currently involved in a project to build optical wireless links to smart dust. Retro-reflectors combined with liquid crystal modulators can be integrated with the micro-machine to create a low power transceiver. When illuminated from a base station a modulated beam is returned, transmitting data. Data from the base station can be transmitted using modulation of the illuminating beam and a receiver at the micro-machine. In this paper we outline the energy consumption and link budget considerations in the design of such micro-machines, and report preliminary experimental results.

Research on a new magnetic-field-modulated brushless double-rotor machine with sinusoidal-permeance modulating ring

NASA Astrophysics Data System (ADS)

Zheng, Ping; Liu, Jiaqi; Bai, Jingang; Song, Zhiyi; Liu, Yong

2017-05-01

The magnetic-field-modulated brushless double-rotor machine (MFM-BDRM), composed of a stator, a modulating ring rotor, and a PM rotor, is a kind of power-split device for hybrid electric vehicles (HEVs). In this paper, a new MFM-BDRM with sinusoidal-permeance modulating ring named Sinusoidal-Permeance-Modulating-Ring Brushless Double-Rotor Machine (SPMR-BDRM) is proposed to solve the problem of poor mechanical strength and large iron loss. The structure and the operating principle of the MFM-BDRM are introduced. The design principle of the sinusoidal-permeance modulating ring is analyzed and derived. The main idea of that is to minimize the harmonic permeance of air gap, thereby the harmonic magnetic fields can be restrained. There are comparisons between a MFM-BDRM with sinusoidal-permeance modulating ring and a same size MFM-BDRM with traditional modulating ring, including magnetic field distributions and electromagnetic performances. Most importantly, the iron losses are compared under six different conditions. The result indicates that the harmonic magnetic fields in the air gap are restrained; the electromagnetic torque and power factor are almost the same with same armature current; the torque ripples of the modulating ring rotor and the PM rotor are reduced; the stator loss is reduced by 13% at least and the PM loss is reduced by 20% at least compared with the same size traditional MFM-BDRM under the same operating conditions.

Programmable Pulse-Position-Modulation Encoder

NASA Technical Reports Server (NTRS)

Zhu, David; Farr, William

2006-01-01

A programmable pulse-position-modulation (PPM) encoder has been designed for use in testing an optical communication link. The encoder includes a programmable state machine and an electronic code book that can be updated to accommodate different PPM coding schemes. The encoder includes a field-programmable gate array (FPGA) that is programmed to step through the stored state machine and code book and that drives a custom high-speed serializer circuit board that is capable of generating subnanosecond pulses. The stored state machine and code book can be updated by means of a simple text interface through the serial port of a personal computer.

[RyR-bound FKBP12.6 and the modulation].

PubMed

Yano, M; Matsuzaki, M

2001-06-01

In the pathogenesis of cardiac dysfunction in heart failure, a decrease in the activity of the sarcoplasmic reticulum (SR) Ca(2+) -ATPase is believed to be a major determinant. Recently, a novel mechanism of cardiac dysfunction in heart failure has been reported on the basis of the following findings:1) PKA hyperphosphorylation of RyR causes a dissociation of FKBP12.6 from RyR, resulting in the abnormal single-channel properties (increased Ca(2+) sensitivity for activation and elevated channel activity associated with destabilization of RyR (Marx et al, Cell 101:365, 2000), 2) a prominent abnormal Ca(2+) leak occurs through RyR, following a partial loss of RyR-bound FKBP12.6 and the resultant conformational change in RyR (Yano M et al, Circulation 102:2131, 2000). This abnormal Ca(2+) leak might possibly cause Ca(2+) overload and consequent diastolic dysfunction, as well as systolic dysfunction.

[Tumors of the 4th ventricle and the craniospinal transitional zone. Review of patients of the Neurosurgical Clinic of the Department of Medicine of the Karl Marx University].

PubMed

Niebeling, H G; Fried, H; Goldhahn, W E; Skrzypczak, J; Brachmann, J; Eichler, I

1983-01-01

From a total of 1,028 infratentorial tumours operated on at the Neurosurgical Hospital of the Section Medicine of the Karl-Marx University Leipzig in the last 30 years, 167 tumours in the region of the 4th ventrical have been selected. Their statistical processing was carried out with respect to specific localisation, average age, kind of tumour, sex, clinical findings, duration of case history, application of instrumental diagnostic procedures and radicality of operation, success and failure. Some fundamental conclussions are drawn. A subdivision in detail will be contained in the following articles based on this material.

Optimality of profit-including prices under ideal planning.

PubMed

Samuelson, P A

1973-07-01

Although prices calculated by a constant percentage markup on all costs (nonlabor as well as direct-labor) are usually admitted to be more realistic for a competitive capitalistic model, the view is often expressed that, for optimal planning purposes, the "values" model of Marx's Capital, Volume I, is to be preferred. It is shown here that an optimal-control model that maximizes discounted social utility of consumption per capita and that ultimately approaches a steady state must ultimately have optimal pricing that involves equal rates of steady-state profit in all industries; and such optimal pricing will necessarily deviate from Marx's model of equal rates of surplus value (markups on direct-labor only) in all industries.

Optimality of Profit-Including Prices Under Ideal Planning

PubMed Central

Samuelson, Paul A.

1973-01-01

Although prices calculated by a constant percentage markup on all costs (nonlabor as well as direct-labor) are usually admitted to be more realistic for a competitive capitalistic model, the view is often expressed that, for optimal planning purposes, the “values” model of Marx's Capital, Volume I, is to be preferred. It is shown here that an optimal-control model that maximizes discounted social utility of consumption per capita and that ultimately approaches a steady state must ultimately have optimal pricing that involves equal rates of steady-state profit in all industries; and such optimal pricing will necessarily deviate from Marx's model of equal rates of surplus value (markups on direct-labor only) in all industries. PMID:16592102

Running VisIt Software on the Peregrine System | High-Performance Computing

Science.gov Websites

kilobyte range. VisIt features a robust remote visualization capability. VisIt can be started on a local machine and used to visualize data on a remote compute cluster.The remote machine must be able to send VisIt module must be loaded as part of this process. To enable remote visualization the 'module load

Teller Training Module: Off-Line Banking System. High-Technology Training Module.

ERIC Educational Resources Information Center

Lund, Candyce J.

This teller training module on offline banking systems is intended to be part of a postsecondary financial applications course. The module contains the following sections: module objective; specific objective; content--electronic audit machine key functions, practice packet--sample bank transactions and practicing procedures, and…

Breast Cancer Recognition Using a Novel Hybrid Intelligent Method

PubMed Central

Addeh, Jalil; Ebrahimzadeh, Ata

2012-01-01

Breast cancer is the second largest cause of cancer deaths among women. At the same time, it is also among the most curable cancer types if it can be diagnosed early. This paper presents a novel hybrid intelligent method for recognition of breast cancer tumors. The proposed method includes three main modules: the feature extraction module, the classifier module, and the optimization module. In the feature extraction module, fuzzy features are proposed as the efficient characteristic of the patterns. In the classifier module, because of the promising generalization capability of support vector machines (SVM), a SVM-based classifier is proposed. In support vector machine training, the hyperparameters have very important roles for its recognition accuracy. Therefore, in the optimization module, the bees algorithm (BA) is proposed for selecting appropriate parameters of the classifier. The proposed system is tested on Wisconsin Breast Cancer database and simulation results show that the recommended system has a high accuracy. PMID:23626945

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smed, T.; Andersson, G.

In this paper, damping of slow oscillations with active and reactive power modulation of HVDC-links is analyzed with the aim of gaining a physical insight into the problem. The analysis shows that active power modulation is efficient when applied to a short mass-scaled electrical distance from one of the swinging machines, and reactive power modulation is most efficient when there exists a well-defined power flow direction and the modulation is made at a point close to the electrical midpoint between the swinging machines. It is shown that the intuitively appealing feedback signals frequency and derivative of the voltage are appropriatemore » for active and reactive power modulation, respectively. The impact of the constraints imposed by the HVDC equations are analyzed, and it is determined when the implicit reactive power modulation resulting from constant [gamma] control may be detrimental for the damping.« less

The association between MR T1ρ and T2 of cartilage and patient-reported outcomes after ACL injury and reconstruction.

PubMed

Su, F; Pedoia, V; Teng, H-L; Kretzschmar, M; Lau, B C; McCulloch, C E; Link, T M; Ma, C B; Li, X

2016-07-01

To determine if cartilage T1ρ and T2 relaxation time measures after ACL injury and prior to reconstruction (baseline) are associated with patient-reported outcomes at baseline, 6-months, and 1-year after surgery. Fifty-four ACL-injured participants were scanned in both knees at baseline using 3T MR T1ρ and T2 mapping. Participants also completed Knee-injury and Osteoarthritis Outcome Score (KOOS) and Marx activity level questionnaires at baseline, 6-months, and 1-year after reconstruction. The difference between cartilage T1ρ or T2 of the injured and contralateral knee (side-to-side difference, SSD) was calculated to account for physiological variations among patients. Linear regression models were built to evaluate the association between the baseline SSD T1ρ or T2 and KOOS or Marx at all time points. Higher baseline SSD T1ρ posterolateral tibia (pLT) was associated with worse KOOS in all subscales except symptoms at baseline, worse KOOS pain at 6-months, and worse KOOS in all subscales except sports function at 1-year. Higher baseline SSD T2 femoral trochlea (TrF) was associated with worse KOOS activities of daily living (ADL) at 1-year. Higher baseline SSD T1ρ pLT was associated with lower Marx activity level at 1-year. More severe cartilage lesions, as assessed by Whole-Organ MRI Scoring (WORMS), was significantly associated with worse KOOS pain at 6-months and 1-year. T1ρ and T2 of cartilage after ACL injury were associated with KOOS after injury and both KOOS and Marx after reconstruction. Such associations may help clinicians stratify outcomes post-injury, and thus, improve patient management. Copyright © 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Machine Vision Giving Eyes to Robots. Resources in Technology.

ERIC Educational Resources Information Center

Technology Teacher, 1990

1990-01-01

This module introduces machine vision, which can be used for inspection, robot guidance and part sorting. The future for machine vision will include new technology and will bring vision systems closer to the ultimate vision processor, the human eye. Includes a student quiz, outcomes, and activities. (JOW)

Fainting

MedlinePlus

... Syncope. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice ... by: Laura J. Martin, MD, MPH, ABIM Board Certified in Internal Medicine ...

Study on intelligent processing system of man-machine interactive garment frame model

NASA Astrophysics Data System (ADS)

Chen, Shuwang; Yin, Xiaowei; Chang, Ruijiang; Pan, Peiyun; Wang, Xuedi; Shi, Shuze; Wei, Zhongqian

2018-05-01

A man-machine interactive garment frame model intelligent processing system is studied in this paper. The system consists of several sensor device, voice processing module, mechanical parts and data centralized acquisition devices. The sensor device is used to collect information on the environment changes brought by the body near the clothes frame model, the data collection device is used to collect the information of the environment change induced by the sensor device, voice processing module is used for speech recognition of nonspecific person to achieve human-machine interaction, mechanical moving parts are used to make corresponding mechanical responses to the information processed by data collection device.it is connected with data acquisition device by a means of one-way connection. There is a one-way connection between sensor device and data collection device, two-way connection between data acquisition device and voice processing module. The data collection device is one-way connection with mechanical movement parts. The intelligent processing system can judge whether it needs to interact with the customer, realize the man-machine interaction instead of the current rigid frame model.

Real-Time Performance of Mechatronic PZT Module Using Active Vibration Feedback Control.

PubMed

Aggogeri, Francesco; Borboni, Alberto; Merlo, Angelo; Pellegrini, Nicola; Ricatto, Raffaele

2016-09-25

This paper proposes an innovative mechatronic piezo-actuated module to control vibrations in modern machine tools. Vibrations represent one of the main issues that seriously compromise the quality of the workpiece. The active vibration control (AVC) device is composed of a host part integrated with sensors and actuators synchronized by a regulator; it is able to make a self-assessment and adjust to alterations in the environment. In particular, an innovative smart actuator has been designed and developed to satisfy machining requirements during active vibration control. This study presents the mechatronic model based on the kinematic and dynamic analysis of the AVC device. To ensure a real time performance, a H2-LQG controller has been developed and validated by simulations involving a machine tool, PZT actuator and controller models. The Hardware in the Loop (HIL) architecture is adopted to control and attenuate the vibrations. A set of experimental tests has been performed to validate the AVC module on a commercial machine tool. The feasibility of the real time vibration damping is demonstrated and the simulation accuracy is evaluated.

Real-Time Performance of Mechatronic PZT Module Using Active Vibration Feedback Control

PubMed Central

Aggogeri, Francesco; Borboni, Alberto; Merlo, Angelo; Pellegrini, Nicola; Ricatto, Raffaele

2016-01-01

This paper proposes an innovative mechatronic piezo-actuated module to control vibrations in modern machine tools. Vibrations represent one of the main issues that seriously compromise the quality of the workpiece. The active vibration control (AVC) device is composed of a host part integrated with sensors and actuators synchronized by a regulator; it is able to make a self-assessment and adjust to alterations in the environment. In particular, an innovative smart actuator has been designed and developed to satisfy machining requirements during active vibration control. This study presents the mechatronic model based on the kinematic and dynamic analysis of the AVC device. To ensure a real time performance, a H2-LQG controller has been developed and validated by simulations involving a machine tool, PZT actuator and controller models. The Hardware in the Loop (HIL) architecture is adopted to control and attenuate the vibrations. A set of experimental tests has been performed to validate the AVC module on a commercial machine tool. The feasibility of the real time vibration damping is demonstrated and the simulation accuracy is evaluated. PMID:27681732

Competency Based Business Education: Business Math/Related Rules.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Wisconsin Vocational Studies Center.

Modules on fractions, decimals, percentages, discounts, interest, the adding machine, and the calculation of a depreciation are included. Each module contains objectives, learning activities, pre-practice exercises, practice exercises, and post-practice exercises. At the beginning of each module, the importance of the module is explained. (MK)

Machine Accounting. An Instructor's Guide.

ERIC Educational Resources Information Center

Gould, E. Noah, Ed.

Designed to prepare students to operate the types of accounting machines used in many medium-sized businesses, this instructor's guide presents a full-year high school course in machine accounting covering 120 hours of instruction. An introduction for the instructor suggests how to adapt the guide to present a 60-hour module which would be…

Machine Shop. Module 8: CNC (Computerized Numerical Control). Instructor's Guide.

ERIC Educational Resources Information Center

Crosswhite, Dwight

This document consists of materials for a five-unit course on the following topics: (1) safety guidelines; (2) coordinates and dimensions; (3) numerical control math; (4) programming for numerical control machines; and (5) setting and operating the numerical control machine. The instructor's guide begins with a list of competencies covered in the…

Minimal universal quantum heat machine.

PubMed

Gelbwaser-Klimovsky, D; Alicki, R; Kurizki, G

2013-01-01

In traditional thermodynamics the Carnot cycle yields the ideal performance bound of heat engines and refrigerators. We propose and analyze a minimal model of a heat machine that can play a similar role in quantum regimes. The minimal model consists of a single two-level system with periodically modulated energy splitting that is permanently, weakly, coupled to two spectrally separated heat baths at different temperatures. The equation of motion allows us to compute the stationary power and heat currents in the machine consistent with the second law of thermodynamics. This dual-purpose machine can act as either an engine or a refrigerator (heat pump) depending on the modulation rate. In both modes of operation, the maximal Carnot efficiency is reached at zero power. We study the conditions for finite-time optimal performance for several variants of the model. Possible realizations of the model are discussed.

Losses analysis of soft magnetic ring core under sinusoidal pulse width modulation (SPWM) and space vector pulse width modulation (SVPWM) excitations

NASA Astrophysics Data System (ADS)

Gao, Hezhe; Li, Yongjian; Wang, Shanming; Zhu, Jianguo; Yang, Qingxin; Zhang, Changgeng; Li, Jingsong

2018-05-01

Practical core losses in electrical machines differ significantly from those experimental results using the standardized measurement method, i.e. Epstein Frame method. In order to obtain a better approximation of the losses in an electrical machine, a simulation method considering sinusoidal pulse width modulation (SPWM) and space vector pulse width modulation (SVPWM) waveforms is proposed. The influence of the pulse width modulation (PWM) parameters on the harmonic components in SPWM and SVPWM is discussed by fast Fourier transform (FFT). Three-level SPWM and SVPWM are analyzed and compared both by simulation and experiment. The core losses of several ring samples magnetized by SPWM, SVPWM and sinusoidal alternating current (AC) are obtained. In addition, the temperature rise of the samples under SPWM, sinusoidal excitation are analyzed and compared.

Open architecture CNC system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tal, J.; Lopez, A.; Edwards, J.M.

1995-04-01

In this paper, an alternative solution to the traditional CNC machine tool controller has been introduced. Software and hardware modules have been described and their incorporation in a CNC control system has been outlined. This type of CNC machine tool controller demonstrates that technology is accessible and can be readily implemented into an open architecture machine tool controller. Benefit to the user is greater controller flexibility, while being economically achievable. PC based, motion as well as non-motion features will provide flexibility through a Windows environment. Up-grading this type of controller system through software revisions will keep the machine tool inmore » a competitive state with minimal effort. Software and hardware modules are mass produced permitting competitive procurement and incorporation. Open architecture CNC systems provide diagnostics thus enhancing maintainability, and machine tool up-time. A major concern of traditional CNC systems has been operator training time. Training time can be greatly minimized by making use of Windows environment features.« less

Concurrent Image Processing Executive (CIPE)

NASA Technical Reports Server (NTRS)

Lee, Meemong; Cooper, Gregory T.; Groom, Steven L.; Mazer, Alan S.; Williams, Winifred I.

1988-01-01

The design and implementation of a Concurrent Image Processing Executive (CIPE), which is intended to become the support system software for a prototype high performance science analysis workstation are discussed. The target machine for this software is a JPL/Caltech Mark IIIfp Hypercube hosted by either a MASSCOMP 5600 or a Sun-3, Sun-4 workstation; however, the design will accommodate other concurrent machines of similar architecture, i.e., local memory, multiple-instruction-multiple-data (MIMD) machines. The CIPE system provides both a multimode user interface and an applications programmer interface, and has been designed around four loosely coupled modules; (1) user interface, (2) host-resident executive, (3) hypercube-resident executive, and (4) application functions. The loose coupling between modules allows modification of a particular module without significantly affecting the other modules in the system. In order to enhance hypercube memory utilization and to allow expansion of image processing capabilities, a specialized program management method, incremental loading, was devised. To minimize data transfer between host and hypercube a data management method which distributes, redistributes, and tracks data set information was implemented.

Norpramin overdose

MedlinePlus

Antidepressant overdose; Desipramine overdose ... Levine M, Ruha A-M. Antidepressants. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: ...

Programmable phase plate for tool modification in laser machining applications

DOEpatents

Thompson Jr., Charles A.; Kartz, Michael W.; Brase, James M.; Pennington, Deanna; Perry, Michael D.

2004-04-06

A system for laser machining includes a laser source for propagating a laser beam toward a target location, and a spatial light modulator having individual controllable elements capable of modifying a phase profile of the laser beam to produce a corresponding irradiance pattern on the target location. The system also includes a controller operably connected to the spatial light modulator for controlling the individual controllable elements. By controlling the individual controllable elements, the phase profile of the laser beam may be modified into a desired phase profile so as to produce a corresponding desired irradiance pattern on the target location capable of performing a machining operation on the target location.

Phlegmasia cerulea dolens

MedlinePlus

Deep vein thrombosis - Phlegmasia cerulea dolens; DVT - Phlegmasia cerulea dolens; Phlegmasia alba dolens ... 2016:chap 81. Kline JA. Pulmonary embolism and deep vein thrombosis. In: Marx JA, Hockberger RS, Walls RM, eds. ...

Paraffin poisoning

MedlinePlus

Gummin DD. Hydrocarbons. In: Adams JG, ed. Emergency Medicine . 2nd ed. Philadelphia, PA: Elsevier Saunders; 2013:chap 152. Kulig K. General approach to the poisoned patient. In: Marx JA, Hockberger RS, Walls ...

Multipurpose Prepregging Machine

NASA Technical Reports Server (NTRS)

Johnston, N. J.; Wilkinson, Steven; Marchello, J. M.; Dixon, D.

1995-01-01

Machine designed and built for variety of uses involving coating or impregnating ("prepregging") fibers, tows, yarns, or webs or tapes made of such fibrous materials with thermoplastic or thermosetting resins. Prepreg materials produced used to make matrix/fiber composite materials. Comprises modules operated individually, sequentially, or simultaneously, depending on nature of specific prepreg material and prepregging technique used. Machine incorporates number of safety features.

Film Processing Module for Automated Fiber Placement

NASA Technical Reports Server (NTRS)

Hulcher, A. Bruce

2004-01-01

This viewgraph presentation describes fiber placement technology which was originally developed by Marshall Space Flight Center (MSFC) for the fabrication of fiber composite propellant tanks. The presentation includes an image of the MSFC Fiber Placement Machine, which is a prototype test bed, and images of some of the machine's parts. Some possible applications for the machines are listed.

Subcutaneous emphysema

MedlinePlus

... PA: Elsevier Saunders; 2016:chap 84. Eckstein M, Henderson SO. Thoracic trauma. In: Marx JA, Hockberger RS, ... by: Jacob L. Heller, MD, MHA, Emergency Medicine, Virginia Mason Medical Center, Seattle, WA. Also reviewed by ...

Septicemia

MedlinePlus

Blood poisoning; Bacteremia with sepsis ... Shapiro NI, Zimmer GD, Barkin AZ. Sepsis syndromes. In: Marx, JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: ...

Rhetorical Constructions: Dialogue and Commitment.

ERIC Educational Resources Information Center

Knoblauch, C. H.

1988-01-01

Reviews Paulo Freire's concept of "praxis." Discusses ontological (Aristotle), objectivist (Descartes, Locke), expressionist (Kant), and sociological or "dialogical" (Marx) statements, and explains their potential application to the teaching of rhetoric. (JK)

A bio-inspired approach for the design of a multifunctional robotic end-effector customized for automated maintenance of a reconfigurable vibrating screen.

PubMed

Makinde, O A; Mpofu, K; Vrabic, R; Ramatsetse, B I

2017-01-01

The development of a robotic-driven maintenance solution capable of automatically maintaining reconfigurable vibrating screen (RVS) machine when utilized in dangerous and hazardous underground mining environment has called for the design of a multifunctional robotic end-effector capable of carrying out all the maintenance tasks on the RVS machine. In view of this, the paper presents a bio-inspired approach which unfolds the design of a novel multifunctional robotic end-effector embedded with mechanical and control mechanisms capable of automatically maintaining the RVS machine. To achieve this, therblig and morphological methodologies (which classifies the motions as well as the actions required by the robotic end-effector in carrying out RVS machine maintenance tasks), obtained from a detailed analogy of how human being (i.e. a machine maintenance manager) will carry out different maintenance tasks on the RVS machine, were used to obtain the maintenance objective functions or goals of the multifunctional robotic end-effector as well as the maintenance activity constraints of the RVS machine that must be adhered to by the multifunctional robotic end-effector during the machine maintenance. The results of the therblig and morphological analyses of five (5) different maintenance tasks capture and classify one hundred and thirty-four (134) repetitive motions and fifty-four (54) functions required in automating the maintenance tasks of the RVS machine. Based on these findings, a worm-gear mechanism embedded with fingers extruded with a hexagonal shaped heads capable of carrying out the "gripping and ungrasping" and "loosening and bolting" functions of the robotic end-effector and an electric cylinder actuator module capable of carrying out "unpinning and hammering" functions of the robotic end-effector were integrated together to produce the customized multifunctional robotic end-effector capable of automatically maintaining the RVS machine. The axial forces ([Formula: see text] and [Formula: see text]), normal forces ([Formula: see text]) and total load [Formula: see text] acting on the teeth of the worm-gear module of the multifunctional robotic end-effector during the gripping of worn-out or new RVS machine subsystems, which are 978.547, 1245.06 and 1016.406 N, respectively, were satisfactory. The nominal bending and torsional stresses acting on the shoulder of the socket module of the multifunctional robotic end-effector during the loosing and tightening of bolts, which are 1450.72 and 179.523 MPa, respectively, were satisfactory. The hammering and unpinning forces utilized by the electric cylinder actuator module of the multifunctional robotic end-effector during the unpinning and hammering of screen panel pins out of and into the screen panels were satisfactory.

Gunshot wounds -- aftercare

MedlinePlus

... wound References Simon BC, Hern HG. Wound management principles. In: Marx JA, Hockberger RS, Walls RM, et ... member of Hi-Ethics and subscribes to the principles of the Health on the Net Foundation (www. ...

Charger 1: A New Facility for Z-Pinch Research

NASA Technical Reports Server (NTRS)

Taylor, Brian; Cassibry, Jason; Cortez, Ross; Doughty, Glen; Adams, Robert; DeCicco, Anthony

2017-01-01

Charger 1 is a multipurpose pulsed power laboratory located on Redstone Arsenal, with a focus on fusion propulsion relevant experiments involving testing z-pinch diodes, pulsed magnetic nozzle and other related physics experiments. UAH and its team of pulsed power researchers are investigating ways to increase and optimize fusion production from Charger 1. Currently the team has reached high-power testing. Due to the unique safety issues related to high power operations the UAH/MSFC team has slowed repair efforts to develop safety and operations protocols. The facility is expected to be operational by the time DZP 2017 convenes. Charger 1 began life as the Decade Module 2, an experimental prototype built to prove the Decade Quad pinch configuration. The system was donated to UAH by the Defense Threat Reduction Agency (DRTA) in 2012. For the past 5 years a UAH/MSFC/Boeing team has worked to refurbish, assemble and test the system. With completion of high power testing in summer 2017 Charger 1 will become operational for experimentation. Charger 1 utilizes a Marx Bank of 72 100-kV capacitors that are charged in parallel and discharged in series. The Marx output is compressed to a pulse width of approximately 200 ns via a pulse forming network of 32 coaxial stainless steel tubes using water as a dielectric. After pulse compression a set of SF6 switches are triggered, allowing the wave front to propagate through the output line to the load. Charger 1 is capable of storing 572-kJ of energy and time compressing discharge to less than 250 ns discharge time producing a discharge of about 1 TW of discharge with 1 MV and 1 MA peak voltage and current, respectively. This capability will be used to study energy yield scaling and physics from solid density target as applied to advanced propulsion research.

Using Multiple FPGA Architectures for Real-time Processing of Low-level Machine Vision Functions

Treesearch

Thomas H. Drayer; William E. King; Philip A. Araman; Joseph G. Tront; Richard W. Conners

1995-01-01

In this paper, we investigate the use of multiple Field Programmable Gate Array (FPGA) architectures for real-time machine vision processing. The use of FPGAs for low-level processing represents an excellent tradeoff between software and special purpose hardware implementations. A library of modules that implement common low-level machine vision operations is presented...

Vomiting blood

MedlinePlus

... in the vomit References Goralnick E, Meguerdichian DA. Gastrointestinal bleeding. In: Marx JA, Hockberger RS, Walls RM, et ... Saunders; 2016:chap 135. Savides TJ, Jensen DM. Gastrointestinal bleeding. In: Feldman M, Friedman LS, Brandt LJ, eds. ...

Conceptual design of a pulsed-power accelerator optimized for megajoule-class 1-TPa dynamic-material-physics experiments

DOE PAGES

Stygar, William A.; Reisman, David B.; Stoltzfus, Brian S.; ...

2016-07-07

In this study, we have developed a conceptual design of a next-generation pulsed-power accelerator that is optmized for driving megajoule-class dynamic-material-physics experiments at pressures as high as 1 TPa. The design is based on an accelerator architecture that is founded on three concepts: single-stage electrical-pulse compression, impedance matching, and transit-time-isolated drive circuits. Since much of the accelerator is water insulated, we refer to this machine as Neptune. The prime power source of Neptune consists of 600 independent impedance-matched Marx generators. As much as 0.8 MJ and 20 MA can be delivered in a 300-ns pulse to a 16-mΩ physics load;more » hence Neptune is a megajoule-class 20-MA arbitrary waveform generator. Neptune will allow the international scientific community to conduct dynamic equation-of-state, phase-transition, mechanical-property, and other material-physics experiments with a wide variety of well-defined drive-pressure time histories. Because Neptune can deliver on the order of a megajoule to a load, such experiments can be conducted on centimeter-scale samples at terapascal pressures with time histories as long as 1 μs.« less

Modeling and simulation of five-axis virtual machine based on NX

NASA Astrophysics Data System (ADS)

Li, Xiaoda; Zhan, Xianghui

2018-04-01

Virtual technology in the machinery manufacturing industry has shown the role of growing. In this paper, the Siemens NX software is used to model the virtual CNC machine tool, and the parameters of the virtual machine are defined according to the actual parameters of the machine tool so that the virtual simulation can be carried out without loss of the accuracy of the simulation. How to use the machine builder of the CAM module to define the kinematic chain and machine components of the machine is described. The simulation of virtual machine can provide alarm information of tool collision and over cutting during the process to users, and can evaluate and forecast the rationality of the technological process.

The Earth Resources Laboratory Applications Software (ELAS) in university research and education: An operator oriented geobased information system

NASA Technical Reports Server (NTRS)

Coker, B. L.; Kind, T. C.; Smith, W. F., Jr.; Weber, N. V.

1981-01-01

Created for analyzing and processing digital data such as that collected by multispectral scanners or digitized from maps, ELAS is designed for ease of user operation and includes its own FORTRAN operating monitor and an expandable set of application modules which are FORTRAN overlays. On those machines that do not support FORTRAN overlaying, the modules exist as subprograms. The subsystem can be implemented on most 16-bit or 32-bit machines and is capable of, but not limited to, operating on low-cost minicomputer systems. The recommended hardware configuration for ELAS and a representative listing of some operating and application modules are presented.

Development of High Efficiency (14%) Solar Cell Array Module

NASA Technical Reports Server (NTRS)

Iles, P. A.; Khemthong, S.; Olah, S.; Sampson, W. J.; Ling, K. S.

1979-01-01

High efficiency solar cells required for the low cost modules was developed. The production tooling for the manufacture of the cells and modules was designed. The tooling consisted of: (1) back contact soldering machine; (2) vacuum pickup; (3) antireflective coating tooling; and (4) test fixture.

Social Models: Blueprints or Processes?

ERIC Educational Resources Information Center

Little, Graham R.

1981-01-01

Discusses the nature and implications of two different models for societal planning: (1) the problem-solving process approach based on Karl Popper; and (2) the goal-setting "blueprint" approach based on Karl Marx. (DC)

Lacerations - liquid bandage

MedlinePlus

... 2011:chap 28. Simon BC, Hern HG. Wound management principles. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

A machine-learned analysis of human gene polymorphisms modulating persisting pain points at major roles of neuroimmune processes.

PubMed

Kringel, Dario; Lippmann, Catharina; Parnham, Michael J; Kalso, Eija; Ultsch, Alfred; Lötsch, Jörn

2018-06-19

Human genetic research has implicated functional variants of more than one hundred genes in the modulation of persisting pain. Artificial intelligence and machine learning techniques may combine this knowledge with results of genetic research gathered in any context, which permits the identification of the key biological processes involved in chronic sensitization to pain. Based on published evidence, a set of 110 genes carrying variants reported to be associated with modulation of the clinical phenotype of persisting pain in eight different clinical settings was submitted to unsupervised machine-learning aimed at functional clustering. Subsequently, a mathematically supported subset of genes, comprising those most consistently involved in persisting pain, was analyzed by means of computational functional genomics in the Gene Ontology knowledgebase. Clustering of genes with evidence for a modulation of persisting pain elucidated a functionally heterogeneous set. The situation cleared when the focus was narrowed to a genetic modulation consistently observed throughout several clinical settings. On this basis, two groups of biological processes, the immune system and nitric oxide signaling, emerged as major players in sensitization to persisting pain, which is biologically highly plausible and in agreement with other lines of pain research. The present computational functional genomics-based approach provided a computational systems-biology perspective on chronic sensitization to pain. Human genetic control of persisting pain points to the immune system as a source of potential future targets for drugs directed against persisting pain. Contemporary machine-learned methods provide innovative approaches to knowledge discovery from previous evidence. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Methods, systems and apparatus for synchronous current regulation of a five-phase machine

DOEpatents

Gallegos-Lopez, Gabriel; Perisic, Milun

2012-10-09

Methods, systems and apparatus are provided for controlling operation of and regulating current provided to a five-phase machine when one or more phases has experienced a fault or has failed. In one implementation, the disclosed embodiments can be used to synchronously regulate current in a vector controlled motor drive system that includes a five-phase AC machine, a five-phase inverter module coupled to the five-phase AC machine, and a synchronous current regulator.

Alienation Incident.

ERIC Educational Resources Information Center

Wasserman, Louis

1979-01-01

Critiques Marxian "cures" for alienation as discussed in Karl Marx's "Economic and Philosophical Manuscripts." Also traces the activity of a former student who joined the revolution in Cuba. Journal available from 7 Harwood Drive, Amherst, New York, 14226. (KC)

Avulsion Fracture: How Is It Treated?

MedlinePlus

... Marx JA, et al., eds. General principles of orthopedic injuries. In: Rosen's Emergency Medicine: Concepts and Clinical ... trademarks of Mayo Foundation for Medical Education and Research. © 1998-2018 Mayo Foundation for Medical Education and ...

Nikolsky sign

MedlinePlus

Garber B, Cydulka RK. Dermatologic presentations. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 120. Habif TP. Vesicular and bullous ...

Gas spark switches with increased operating life for Marx generator of lightning test complex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bykov, Yu. A.; Krastelev, E. G., E-mail: ekrastelev@yandex.ru

A new design of gas spark switches with an increased operating life and stable dynamic characteristics for the Marx generator of the lightning test complex has been developed. The switches are characterized by the following parameters in the mode of operation: voltage up to 80 kV, discharge current up to 50 kA, flowing charge up to 3.5 C/pulse. An increased operating life is achieved by using torus-shaped electrodes with increased working surface area and a trigger electrode in the form of a thick disk with a hole located between them. Low breakdown delay time and high stability of breakdown voltagemore » under dynamic conditions are provided by gas preionization in the spark gap using UV radiation of an additional corona discharge in the axial region.« less

Wireless tracking of cotton modules Part II: automatic machine identification and system testing

USDA-ARS?s Scientific Manuscript database

Mapping the harvest location of cotton modules is essential to practical understanding and utilization of spatial-variability information in fiber quality. A wireless module-tracking system was recently developed, but automation of the system is required before it will find practical use on the far...

Toward an autonomous brain machine interface: integrating sensorimotor reward modulation and reinforcement learning.

PubMed

Marsh, Brandi T; Tarigoppula, Venkata S Aditya; Chen, Chen; Francis, Joseph T

2015-05-13

For decades, neurophysiologists have worked on elucidating the function of the cortical sensorimotor control system from the standpoint of kinematics or dynamics. Recently, computational neuroscientists have developed models that can emulate changes seen in the primary motor cortex during learning. However, these simulations rely on the existence of a reward-like signal in the primary sensorimotor cortex. Reward modulation of the primary sensorimotor cortex has yet to be characterized at the level of neural units. Here we demonstrate that single units/multiunits and local field potentials in the primary motor (M1) cortex of nonhuman primates (Macaca radiata) are modulated by reward expectation during reaching movements and that this modulation is present even while subjects passively view cursor motions that are predictive of either reward or nonreward. After establishing this reward modulation, we set out to determine whether we could correctly classify rewarding versus nonrewarding trials, on a moment-to-moment basis. This reward information could then be used in collaboration with reinforcement learning principles toward an autonomous brain-machine interface. The autonomous brain-machine interface would use M1 for both decoding movement intention and extraction of reward expectation information as evaluative feedback, which would then update the decoding algorithm as necessary. In the work presented here, we show that this, in theory, is possible. Copyright © 2015 the authors 0270-6474/15/357374-14$15.00/0.

exprso: an R-package for the rapid implementation of machine learning algorithms.

PubMed

Quinn, Thomas; Tylee, Daniel; Glatt, Stephen

2016-01-01

Machine learning plays a major role in many scientific investigations. However, non-expert programmers may struggle to implement the elaborate pipelines necessary to build highly accurate and generalizable models. We introduce exprso , a new R package that is an intuitive machine learning suite designed specifically for non-expert programmers. Built initially for the classification of high-dimensional data, exprso uses an object-oriented framework to encapsulate a number of common analytical methods into a series of interchangeable modules. This includes modules for feature selection, classification, high-throughput parameter grid-searching, elaborate cross-validation schemes (e.g., Monte Carlo and nested cross-validation), ensemble classification, and prediction. In addition, exprso also supports multi-class classification (through the 1-vs-all generalization of binary classifiers) and the prediction of continuous outcomes.

Tendinitis Pain: Should I Apply Ice or Heat?

MedlinePlus

... Marx JA, et al., eds. General Principles of Orthopedic Injuries. In: Rosen's Emergency Medicine: Concepts and Clinical ... trademarks of Mayo Foundation for Medical Education and Research. © 1998-2018 Mayo Foundation for Medical Education and ...

Laceration - sutures or staples - at home

MedlinePlus

... 2016:chap 28. Simon BC, Hern HG. Wound management principles. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

Unresolved Galaxy Classifier for ESA/Gaia mission: Support Vector Machines approach

NASA Astrophysics Data System (ADS)

Bellas-Velidis, Ioannis; Kontizas, Mary; Dapergolas, Anastasios; Livanou, Evdokia; Kontizas, Evangelos; Karampelas, Antonios

A software package Unresolved Galaxy Classifier (UGC) is being developed for the ground-based pipeline of ESA's Gaia mission. It aims to provide an automated taxonomic classification and specific parameters estimation analyzing Gaia BP/RP instrument low-dispersion spectra of unresolved galaxies. The UGC algorithm is based on a supervised learning technique, the Support Vector Machines (SVM). The software is implemented in Java as two separate modules. An offline learning module provides functions for SVM-models training. Once trained, the set of models can be repeatedly applied to unknown galaxy spectra by the pipeline's application module. A library of galaxy models synthetic spectra, simulated for the BP/RP instrument, is used to train and test the modules. Science tests show a very good classification performance of UGC and relatively good regression performance, except for some of the parameters. Possible approaches to improve the performance are discussed.

Design and verification of a novel hollow vibrating module for laser machining.

PubMed

Wang, Zhaozhao; Jang, Seungbong; Kim, EunHee; Jeon, Yongho; Lee, Soo-Hun; Lee, Moon G

2015-04-01

If a vibration module is added on laser machining system, the quality of surface finish and aspect ratio on metals can be significantly enhanced. In this study, a single mobility model of vibrating laser along the path of laser beam was put forward. In order to realize the desired unidirectional motion, a resonance type vibration module with optical lens was designed and manufactured. This cylindrical module was composed of curved-beam flexure elements. The cylindrical coordinate system was established to describe the relationship of a curved-beam flexure element's motion and deformation. In addition, the stiffness matrix of the curved-beam element was obtained. Finite element method and dynamical modeling were provided to analyze the resonance frequency and the displacement of the motion. The feasibility of the design was demonstrated with the help of experiments on frequency response. Experimental results show good agreement with theoretical analysis and simulation predictions.

Jacks--A Study of Simple Machines.

ERIC Educational Resources Information Center

Parsons, Ralph

This vocational physics individualized student instructional module on jacks (simple machines used to lift heavy objects) contains student prerequisites and objectives, an introduction, and sections on the ratchet bumper jack, the hydraulic jack, the screw jack, and load limitations. Designed with a laboratory orientation, each section consists of…

Concurrent Image Processing Executive (CIPE). Volume 1: Design overview

NASA Technical Reports Server (NTRS)

Lee, Meemong; Groom, Steven L.; Mazer, Alan S.; Williams, Winifred I.

1990-01-01

The design and implementation of a Concurrent Image Processing Executive (CIPE), which is intended to become the support system software for a prototype high performance science analysis workstation are described. The target machine for this software is a JPL/Caltech Mark 3fp Hypercube hosted by either a MASSCOMP 5600 or a Sun-3, Sun-4 workstation; however, the design will accommodate other concurrent machines of similar architecture, i.e., local memory, multiple-instruction-multiple-data (MIMD) machines. The CIPE system provides both a multimode user interface and an applications programmer interface, and has been designed around four loosely coupled modules: user interface, host-resident executive, hypercube-resident executive, and application functions. The loose coupling between modules allows modification of a particular module without significantly affecting the other modules in the system. In order to enhance hypercube memory utilization and to allow expansion of image processing capabilities, a specialized program management method, incremental loading, was devised. To minimize data transfer between host and hypercube, a data management method which distributes, redistributes, and tracks data set information was implemented. The data management also allows data sharing among application programs. The CIPE software architecture provides a flexible environment for scientific analysis of complex remote sensing image data, such as planetary data and imaging spectrometry, utilizing state-of-the-art concurrent computation capabilities.

Real-time machine vision system using FPGA and soft-core processor

NASA Astrophysics Data System (ADS)

Malik, Abdul Waheed; Thörnberg, Benny; Meng, Xiaozhou; Imran, Muhammad

2012-06-01

This paper presents a machine vision system for real-time computation of distance and angle of a camera from reference points in the environment. Image pre-processing, component labeling and feature extraction modules were modeled at Register Transfer (RT) level and synthesized for implementation on field programmable gate arrays (FPGA). The extracted image component features were sent from the hardware modules to a soft-core processor, MicroBlaze, for computation of distance and angle. A CMOS imaging sensor operating at a clock frequency of 27MHz was used in our experiments to produce a video stream at the rate of 75 frames per second. Image component labeling and feature extraction modules were running in parallel having a total latency of 13ms. The MicroBlaze was interfaced with the component labeling and feature extraction modules through Fast Simplex Link (FSL). The latency for computing distance and angle of camera from the reference points was measured to be 2ms on the MicroBlaze, running at 100 MHz clock frequency. In this paper, we present the performance analysis, device utilization and power consumption for the designed system. The FPGA based machine vision system that we propose has high frame speed, low latency and a power consumption that is much lower compared to commercially available smart camera solutions.

Monitoring machining conditions by infrared images

NASA Astrophysics Data System (ADS)

Borelli, Joao E.; Gonzaga Trabasso, Luis; Gonzaga, Adilson; Coelho, Reginaldo T.

2001-03-01

During machining process the knowledge of the temperature is the most important factor in tool analysis. It allows to control main factors that influence tool use, life time and waste. The temperature in the contact area between the piece and the tool is resulting from the material removal in cutting operation and it is too difficult to be obtained because the tool and the work piece are in motion. One way to measure the temperature in this situation is detecting the infrared radiation. This work presents a new methodology for diagnosis and monitoring of machining processes with the use of infrared images. The infrared image provides a map in gray tones of the elements in the process: tool, work piece and chips. Each gray tone in the image corresponds to a certain temperature for each one of those materials and the relationship between the gray tones and the temperature is gotten by the previous of infrared camera calibration. The system developed in this work uses an infrared camera, a frame grabber board and a software composed of three modules. The first module makes the image acquisition and processing. The second module makes the feature image extraction and performs the feature vector. Finally, the third module uses fuzzy logic to evaluate the feature vector and supplies the tool state diagnostic as output.

[Profile and tasks of a medical university polyclinic in the past and present using as example the Medical Polyclinical Institutes of the Karl Marx University of Leipzig].

PubMed

Hambsch, K; Treutler, H; Pietruschka, W D

1981-03-15

After a short survey of the historical development of the Medico-Policlinical Institute of the Karl Marx University Leipzig tasks and developmental tendencies of university medical policlinics are described, evaluating hereby the results of the Vth conference of higher education. They are understood as a university representation of ambulatorily working internists and to a large extent of the specialists for general medicine. Their main tasks consist in education and continued professional training of this group of physicians under integrative description of the whole subject internal medicine, a research oriented to practice as well as a guiding and coordination function for the ambulatory internistic care, taking into particular consideration the early recognition of a disease, in primary and secondary prevention as well as in a scientifically based ambulatory therapy of epidemiologically important diseases.

[Development of the legal abortion situation at the gynecologic hospital of Karl-Marx-University, Leipzig from 1.1.1960 to 30.6.1972].

PubMed

Schulz, S; Henning, G

1973-07-13

Statistics on legal abortions at the Women's Clinic, Karl Marx University, Leipzig, East Germany, are reported. Between 1960-June 30, 1972, there were 3955 abortions and 53,972 births. Of these, 1368 abortions and 1831 births occurred in 1972; a similar large increase in abortions has been reported from other socialist countries. Average age of patients was 30.6 years in 1960, 27.7 years in 1972. In 1960, 83.1% of patients were married, but only 66.4% in 1972. Average hospital stay was 10.3 days in 1960, 3.7 days in 1972. Complications were seen in 32.5% of cases in 1960, and in 8.3% in 1972. Statistics for each year, 1960-1972, are given, and the implications of this information for medical practice and social policy are discussed.

[Darwin versus Marx? Reflections on a book by Giovanni Jervis].

PubMed

Cavallaro, Luigi

2012-01-01

Giovanni Jervis'2002 book Individualismo e cooperazione. Psicologia della politica [Individualism and Cooperation: Psychology of Politics] is the outcome of a critical reflection begun by the author at the end of the 1970s in order to explore the manifestations and the problems of cooperation between individuals, and to identify some "universal" psychological factors that could define the role of psychology within politics and constitute an "objective foundation" of any human culture. Although Jervis was, so to speak,favoring Darwin against Marx, it is argued that,from his overall reasoning, several of his arguments actually are in favor of the inevitable "historicity" of individuals, due to the social conditioning they are subjected since birth: too often certain "universalistic" approaches transmit, together with scientific advances (or even without them), well identifiable ideological motives linked to precise and well defined historical and economic interests?

Pioneers of laser propulsion: Saenger, Marx, Moeckel, and Kantrowitz

NASA Astrophysics Data System (ADS)

Michaelis, Max M.; Hey, John D.

2002-09-01

The strength of empires and civilizations has often depended on novel forms of transportation: the Viking long boat, the Roman road, Iberian galleons, French and British steam ships, Indian trains, the car of the early twentieth century, the plane of the middle and the rocket of late. But Space has now come up against a barrier: the enormous and barely affordable expense of putting things into orbit and the unaffordable energy required to travel to the stars. The recent advent of very energetic lasers may reduce the cost. The pioneering ideas of the mid sixties appear less fanciful. Laser space propulsion is about to become such an important topic that its scientific origin and engineering roots need to be investigated. This is by no means an exhaustive survey. We review here the laser propulsion work of four eminent experts: Eugen Saenger, George Marx, Wolfgang Moeckel and Arthur Kantrowitz.

An university-scale pulsed-power system using a bipolar Marx generator

NASA Astrophysics Data System (ADS)

Chang, Po-Yu; Yang, Sheng-Hua; Huang, Mei-Feng; Isaps, Natl Cheng Kung Univ Team

2017-10-01

A bipolar Marx generator is being built for x-ray sources or laboratory astrophysics and space research for university-scale laboratory. The system consists of ten stages. In each stage, two 1 μF capacitors connected in series are charged to +/- 30 kV storing 9 kJ of total energy. It delivers a current of 200 kA to the load with a 200 ns rise time during the discharge. It will be used for following three purposes: (1) gas-puff z pinches generating soft x-ray for bio-medical research in the future; (2) generating plasma jets to study interactions between plasma flows and unmagnetized/magnetized obstacles analogous to the interactions between solar winds and planetary magnetic fields or unmagnetized planets; and (3) studying the pinch in a dense plasma focus device. The results of current measurements and circuit characteristics are shown.

Mathematical model of simple spalling formation during coal cutting with extracting machine

NASA Astrophysics Data System (ADS)

Gabov, V. V.; Zadkov, D. A.

2018-05-01

A single-mass model of a rotor shearer is analyzed. It is shown that rotor mining machines has large inertia moments and load dynamics. An extraction module model with selective movement of the cutting tool is represented. The peculiar feature of such extracting machines is fluid power drive cutter mechanism. They can steadily operate at large shear thickness, and locking modes are not an emergency for them. Comparing with shearers they have less inertional mass, but slower average cutting speed, and its momentary values depend on load. Basing on the equation of hydraulic fuel consumption balance the work of fluid power drive of extracting module cutter mechanism together with hydro pneumatic accumulator is analyzed. Spalling formation model during coal cutting with fluid power drive cutter mechanism and potential energy stores are suggested. Matching cutter speed with the speed of main crack expansion and amount of potential energy consumption, cutter load is determined only by ultimate stress at crack pole and friction. Tests of an extracting module cutter in real size model proved the stated theory.

Research on ARM Numerical Control System

NASA Astrophysics Data System (ADS)

Wei, Xu; JiHong, Chen

Computerized Numerical Control (CNC) machine tools is the foundation of modern manufacturing systems, whose advanced digital technology is the key to solve the problem of sustainable development of machine tool manufacturing industry. The paper is to design CNC system embedded on ARM and indicates the hardware design and the software systems supported. On the hardware side: the driving chip of the motor control unit, as the core of components, is MCX314AL of DSP motion control which is developed by NOVA Electronics Co., Ltd. of Japan. It make convenient to control machine because of its excellent performance, simple interface, easy programming. On the Software side, the uC/OS-2 is selected as the embedded operating system of the open source, which makes a detailed breakdown of the modules of the CNC system. Those priorities are designed according to their actual requirements. The ways of communication between the module and the interrupt response are so different that it guarantees real-time property and reliability of the numerical control system. Therefore, it not only meets the requirements of the current social precision machining, but has good man-machine interface and network support to facilitate a variety of craftsmen use.

Conducted noise analysis and protection of 45 kJ/s, ±50 kV capacitor charging power supply when interfaced with repetitive Marx based pulse power system.

PubMed

Naresh, P; Patel, Ankur; Sharma, Archana

2015-09-01

Pulse power systems with highly dynamic loads like klystron, backward wave oscillator (BWO), and magnetron generate highly dynamic noise. This noise leads to frequent failure of controlled switches in the inverter stage of charging power supply. Designing a reliable and compatible power supply for pulse power applications is always a tricky job when charging rate is in multiples of 10 kJ/s. A ±50 kV and 45 kJ/s capacitor charging power supply based on 4th order LCLC resonant topology has been developed for a 10 Hz repetitive Marx based system. Conditions for load independent constant current and zero current switching (ZCS) are derived mathematically. Noise generated at load end due to dynamic load is tackled effectively and reduction in magnitude noise voltage is achieved by providing shielding between primary and secondary of high voltage high frequency transformer and with LCLC low pass filter. Shielding scales down the ratio between coupling capacitance (Cc) and the collector-emitter capacitance of insulated gate bi-polar transistor switch, which in turn reduces the common mode noise voltage magnitude. The proposed 4th order LCLC resonant network acts as a low pass filter for differential mode noise in the reverse direction (from load to source). Power supply has been tested repeatedly with 5 Hz repetition rate with repetitive Marx based system connected with BWO load working fine without failure of single switch in the inverter stage.

Conducted noise analysis and protection of 45 kJ/s, ±50 kV capacitor charging power supply when interfaced with repetitive Marx based pulse power system

NASA Astrophysics Data System (ADS)

Naresh, P.; Patel, Ankur; Sharma, Archana

2015-09-01

Pulse power systems with highly dynamic loads like klystron, backward wave oscillator (BWO), and magnetron generate highly dynamic noise. This noise leads to frequent failure of controlled switches in the inverter stage of charging power supply. Designing a reliable and compatible power supply for pulse power applications is always a tricky job when charging rate is in multiples of 10 kJ/s. A ±50 kV and 45 kJ/s capacitor charging power supply based on 4th order LCLC resonant topology has been developed for a 10 Hz repetitive Marx based system. Conditions for load independent constant current and zero current switching (ZCS) are derived mathematically. Noise generated at load end due to dynamic load is tackled effectively and reduction in magnitude noise voltage is achieved by providing shielding between primary and secondary of high voltage high frequency transformer and with LCLC low pass filter. Shielding scales down the ratio between coupling capacitance (Cc) and the collector-emitter capacitance of insulated gate bi-polar transistor switch, which in turn reduces the common mode noise voltage magnitude. The proposed 4th order LCLC resonant network acts as a low pass filter for differential mode noise in the reverse direction (from load to source). Power supply has been tested repeatedly with 5 Hz repetition rate with repetitive Marx based system connected with BWO load working fine without failure of single switch in the inverter stage.

Heimlich maneuver

MedlinePlus

... nih.gov/pubmed/26472993 . Thomas SH, Goodloe JM. Foreign bodies. In: Marx JA, Hockberger RS, Walls RM, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice. 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 60. Review Date 3/31/2017 Updated by: Jacob L. ...

The Division of Labor, Technology, and Education: Cross-National Evidence

ERIC Educational Resources Information Center

Grandjean, Burke D.

1974-01-01

The author provides data on 29 countries to test the hypothesis of Durkheim, Marx, and Adam Smith that the division of labor and technological development lead to expanded education. The results support the above thesis. (Author/DE)

Science under duress

NASA Astrophysics Data System (ADS)

2016-11-01

In the first half of the 20th century, devotion to Marx's "one science" contributed to the deaths of millions of ordinary Russians. How this happened is the subject of Stalin and the Scientists: a History of Triumph and Tragedy by Simon Ings.

Prerenal azotemia

MedlinePlus

... failure. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 97. Review Date 10/22/2016 Updated by: Walead Latif, MD, Nephrologist and Clinical Associate Professor, Rutgers Medical ...

Speckle-learning-based object recognition through scattering media.

PubMed

Ando, Takamasa; Horisaki, Ryoichi; Tanida, Jun

2015-12-28

We experimentally demonstrated object recognition through scattering media based on direct machine learning of a number of speckle intensity images. In the experiments, speckle intensity images of amplitude or phase objects on a spatial light modulator between scattering plates were captured by a camera. We used the support vector machine for binary classification of the captured speckle intensity images of face and non-face data. The experimental results showed that speckles are sufficient for machine learning.

ClearTK 2.0: Design Patterns for Machine Learning in UIMA

PubMed Central

Bethard, Steven; Ogren, Philip; Becker, Lee

2014-01-01

ClearTK adds machine learning functionality to the UIMA framework, providing wrappers to popular machine learning libraries, a rich feature extraction library that works across different classifiers, and utilities for applying and evaluating machine learning models. Since its inception in 2008, ClearTK has evolved in response to feedback from developers and the community. This evolution has followed a number of important design principles including: conceptually simple annotator interfaces, readable pipeline descriptions, minimal collection readers, type system agnostic code, modules organized for ease of import, and assisting user comprehension of the complex UIMA framework. PMID:29104966

ClearTK 2.0: Design Patterns for Machine Learning in UIMA.

PubMed

Bethard, Steven; Ogren, Philip; Becker, Lee

2014-05-01

ClearTK adds machine learning functionality to the UIMA framework, providing wrappers to popular machine learning libraries, a rich feature extraction library that works across different classifiers, and utilities for applying and evaluating machine learning models. Since its inception in 2008, ClearTK has evolved in response to feedback from developers and the community. This evolution has followed a number of important design principles including: conceptually simple annotator interfaces, readable pipeline descriptions, minimal collection readers, type system agnostic code, modules organized for ease of import, and assisting user comprehension of the complex UIMA framework.

Block-Module Electric Machines of Alternating Current

NASA Astrophysics Data System (ADS)

Zabora, I.

2018-03-01

The paper deals with electric machines having active zone based on uniform elements. It presents data on disk-type asynchronous electric motors with short-circuited rotors, where active elements are made by integrated technique that forms modular elements. Photolithography, spraying, stamping of windings, pressing of core and combined methods are utilized as the basic technological approaches of production. The constructions and features of operation for new electric machine - compatible electric machines-transformers are considered. Induction motors are intended for operation in hermetic plants with extreme conditions surrounding gas, steam-to-gas and liquid environment at a high temperature (to several hundred of degrees).

Osmotic diuresis

MedlinePlus

... disorders. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 125. Review Date 8/22/2016 Updated by: Laura J. Martin, MD, MPH, ABIM Board Certified in Internal Medicine ...

Redesigning the Human-Machine Interface for Computer-Mediated Visual Technologies.

ERIC Educational Resources Information Center

Acker, Stephen R.

1986-01-01

This study examined an application of a human machine interface which relies on the use of optical bar codes incorporated in a computer-based module to teach radio production. The sequencing procedure used establishes the user rather than the computer as the locus of control for the mediated instruction. (Author/MBR)

Automated Solar Module Assembly Line

NASA Technical Reports Server (NTRS)

Bycer, M.

1979-01-01

The gathering of information that led to the design approach of the machine, and a summary of the findings in the areas of study along with a description of each station of the machine are discussed. The machine is a cell stringing and string applique machine which is flexible in design, capable of handling a variety of cells and assembling strings of cells which can then be placed in a matrix up to 4 ft x 2 ft. in series or parallel arrangement. The target machine cycle is to be 5 seconds per cell. This machine is primarily adapted to 100 MM round cells with one or two tabs between cells. It places finished strings of up to twelve cells in a matrix of up to six such strings arranged in series or in parallel.

First Experiments with Planar Wire Arrays on U Michigan's Linear Transformer Driver

NASA Astrophysics Data System (ADS)

Safronova, A. S.; Kantsyrev, V. L.; Weller, M. E.; Shrestha, I. K.; Shlyaptseva, V. V.; Cooper, M. C.; Lorance, M.; Stafford, A.; Patel, S. G.; Steiner, A. M.; Yager-Elorriaga, D. A.; Jordan, N. M.; Gilgenbach, R. M.

2014-10-01

For petawatt-class Z-pinch accelerators, a Linear Transformer Driver (LTD)-driven accelerator promises to be (at a given pinch current and implosion time) more efficient than the conventionally used Marx-driven accelerator. Because there exists almost no data on how wire arrays radiate on LTD-based machines in the USA, it is very important to perform radiation and plasma physics studies on this new type of generator. We report on the first outcome of the new partnership with University of Michigan (UM), which resulted in successful UNR-UM experiments on the low-impedance MAIZE generator with planar wire arrays (PWA). PWA is a novel wire array load that was introduced and tested in detail on high-impedance Zebra at UNR during the last years and found to be the most efficient radiator. Implosion of Al Double PWAs of different configurations were achieved on MAIZE, observed with a set of various diagnostics which include x-ray diode detectors, x-ray spectroscopy and imaging, and shadowgraphy. Al and Mg plasmas of more than 450 eV were studied in detail. Research supported by NNSA under DOE Cooperative Agreement DE-NA0001984. S. G. Patel and A. M. Steiner supported by Sandia National Laboratories. D. A. Yager-Elorriaga supported by NSF GF.

Machines, medication, modulation: circuits of dependency and self-care in Las Vegas.

PubMed

Schüll, Natasha Dow

2006-06-01

The intensive entertainment infrastructure of Las Vegas is overlaid with a robust therapeutic network for those who become addicted to its technologies. Although the objectives of gambling machines and addiction therapeutics are seemingly at odds--the first work to encourage play, the second to stop it--both gear their interventions around a model of the self as a continuum of behavioral potentials that can be externally modulated. For compulsive gamblers implicated in this circuit of modulation, pharmaceutical drugs that have been prescribed to dampen cravings for machine play sometimes function as intensifiers of its effects. Caught in an intractable play between technologies of harm and technologies of care, recovering gambling addicts are challenged to assemble a technical array through which they can maintain balance; health itself, for these individuals, becomes a state of managed dependency. This essay explores the shifting terms and changing stakes of subjectivity and health in the contemporary United States by way of ethnographic research on compulsive gamblers who live and work in Las Vegas. The analysis draws on interviews with gamblers as well as on observations in local self-help groups, directed group therapy sessions, and chat rooms of Internet recovery Web sites.

Marx in Narnia.

ERIC Educational Resources Information Center

Wade, Barrie; Sheppard, John

1989-01-01

Argues that teachers must understand the different values found in children's literature. Examines four aspects of values present in C. S. Lewis's "Chronicles of Narnia." Asserts that teachers must take responsibility for how such texts are received by young readers in the current multicultural, sexually equal society. (MM)

SU-E-T-113: Dose Distribution Using Respiratory Signals and Machine Parameters During Treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Imae, T; Haga, A; Saotome, N

Purpose: Volumetric modulated arc therapy (VMAT) is a rotational intensity-modulated radiotherapy (IMRT) technique capable of acquiring projection images during treatment. Treatment plans for lung tumors using stereotactic body radiotherapy (SBRT) are calculated with planning computed tomography (CT) images only exhale phase. Purpose of this study is to evaluate dose distribution by reconstructing from only the data such as respiratory signals and machine parameters acquired during treatment. Methods: Phantom and three patients with lung tumor underwent CT scans for treatment planning. They were treated by VMAT while acquiring projection images to derive their respiratory signals and machine parameters including positions ofmore » multi leaf collimators, dose rates and integrated monitor units. The respiratory signals were divided into 4 and 10 phases and machine parameters were correlated with the divided respiratory signals based on the gantry angle. Dose distributions of each respiratory phase were calculated from plans which were reconstructed from the respiratory signals and the machine parameters during treatment. The doses at isocenter, maximum point and the centroid of target were evaluated. Results and Discussion: Dose distributions during treatment were calculated using the machine parameters and the respiratory signals detected from projection images. Maximum dose difference between plan and in treatment distribution was −1.8±0.4% at centroid of target and dose differences of evaluated points between 4 and 10 phases were no significant. Conclusion: The present method successfully evaluated dose distribution using respiratory signals and machine parameters during treatment. This method is feasible to verify the actual dose for moving target.« less

Design and experimental validation for direct-drive fault-tolerant permanent-magnet vernier machines.

PubMed

Liu, Guohai; Yang, Junqin; Chen, Ming; Chen, Qian

2014-01-01

A fault-tolerant permanent-magnet vernier (FT-PMV) machine is designed for direct-drive applications, incorporating the merits of high torque density and high reliability. Based on the so-called magnetic gearing effect, PMV machines have the ability of high torque density by introducing the flux-modulation poles (FMPs). This paper investigates the fault-tolerant characteristic of PMV machines and provides a design method, which is able to not only meet the fault-tolerant requirements but also keep the ability of high torque density. The operation principle of the proposed machine has been analyzed. The design process and optimization are presented specifically, such as the combination of slots and poles, the winding distribution, and the dimensions of PMs and teeth. By using the time-stepping finite element method (TS-FEM), the machine performances are evaluated. Finally, the FT-PMV machine is manufactured, and the experimental results are presented to validate the theoretical analysis.

High-durability surface-discharge flash x-ray tube driven by a two-stage Marx pulser

NASA Astrophysics Data System (ADS)

Shikoda, Arimitsu; Sato, Eiichi; Kimura, Shingo; Oizumi, Teiji; Tamakawa, Yoshiharu; Yanagisawa, Toru

1993-02-01

We developed a high-durability flash x-ray tube with a plate-shaped ferrite cathode for the use in the field of biomedical engineering and technology. The surface-discharge cathode was very useful for generating stable flash x rays. This flash x-ray generator consisted of the following essential components: a high-voltage power supply, an energy-storage condenser of 97 nF, a two-stage Marx type pulser, an oil diffusion pump, and a flash x-ray tube. This x-ray tube was of a diode which was connected to the turbo molecular pump and had plate-shaped anode and cathode electrodes. The cathode electrode was made of ferrite, and its edge was covered with a thin gold film by means of the spattering in order to decrease contact resistance. The space between the anode and cathode electrodes could be regulated from the outside of the x-ray rube. The two condensers in Marx circuit were charged from 50 to 70 kV by a power supply, and the condensers were connected in series after closing a gap switch. Thus the maximum output voltages from the pulser were about two times the charged voltages. In this experiment, the maximum tube voltage and the current were about 110 kV and 0.8 kA, respectively. The pulse widths were less than 140 ns, and the maximum x-ray intensity was 1.27 (mu) C/kg at 0.5 m per pulse. The size of the focal spot and the maximum repetition rate were about 2 X 2.5 mm and 50 Hz (fps), respectively.

Electron paramagnetic resonance field-modulation eddy-current analysis of silver-plated graphite resonators

NASA Astrophysics Data System (ADS)

Mett, Richard R.; Anderson, James R.; Sidabras, Jason W.; Hyde, James S.

2005-09-01

Magnetic field modulation is often introduced into a cylindrical TE011 electron paramagnetic resonance (EPR) cavity through silver plating over a nonconductive substrate. The plating thickness must be many times the skin depth of the rf and smaller than the skin depth of the modulation. We derive a parameter that quantifies the modulation field penetration and find that it also depends on resonator dimensions. Design criteria based on this parameter are presented graphically. This parameter is then used to predict the behavior of eddy currents in substrates of moderate conductivity, such as graphite. The conductivity of the graphite permits improved plating uniformity and permits use of electric discharge machining (EDM) techniques to make the resonator. EDM offers precision tolerances of 0.005 mm and is suitable for small, complicated shapes that are difficult to machine by other methods. Analytic predictions of the modulation penetration are compared with the results of finite-element simulations. Simulated magnetic field modulation uniformity and penetration are shown for several elemental coils and structures including the plated graphite TE011 cavity. Fabrication and experimental testing of the structure are discussed. Spatial inhomogeneity of the modulation phase is also investigated by computer simulation. We find that the modulation phase is uniform to within 1% over the TE011 cavity. Structures of lower symmetry have increased phase nonuniformity.

Effect of High-speed Milling tool path strategies on the surface roughness of Stavax ESR mold insert machining

NASA Astrophysics Data System (ADS)

Mebrahitom, A.; Rizuan, D.; Azmir, M.; Nassif, M.

2016-02-01

High speed milling is one of the recent technologies used to produce mould inserts due to the need for high surface finish. It is a faster machining process where it uses a small side step and a small down step combined with very high spindle speed and feed rate. In order to effectively use the HSM capabilities, optimizing the tool path strategies and machining parameters is an important issue. In this paper, six different tool path strategies have been investigated on the surface finish and machining time of a rectangular cavities of ESR Stavax material. CAD/CAM application of CATIA V5 machining module for pocket milling of the cavities was used for process planning.

Synthetic Space Vector Modulation

DTIC Science & Technology

2013-06-01

especially batteries without fancy controls. Inherently, DC machine commutation is environmentally sensitive and maintenance intensive at well as...reliable DC power supplies especially batteries without fancy controls. Inherently, DC machine commutation is environmentally sensitive and maintenance...Drives and Energy Systems, New Delhi, India , 20-23 December, 2010. [12] PIC18F2331/2431/4331/4431 datasheet DS39616B, Microchip Technology Inc

Compiler writing system detail design specification. Volume 2: Component specification

NASA Technical Reports Server (NTRS)

Arthur, W. J.

1974-01-01

The logic modules and data structures composing the Meta-translator module are desribed. This module is responsible for the actual generation of the executable language compiler as a function of the input Meta-language. Machine definitions are also processed and are placed as encoded data on the compiler library data file. The transformation of intermediate language in target language object text is described.

Self-propulsion and interactions of catalytic particles in a chemically active medium.

PubMed

Banigan, Edward J; Marko, John F

2016-01-01

Enzymatic "machines," such as catalytic rods or colloids, can self-propel and interact by generating gradients of their substrates. We theoretically investigate the behaviors of such machines in a chemically active environment where their catalytic substrates are continuously synthesized and destroyed, as occurs in living cells. We show how the kinetic properties of the medium modulate self-propulsion and pairwise interactions between machines, with the latter controlled by a tunable characteristic interaction range analogous to the Debye screening length in an electrolytic solution. Finally, we discuss the effective force arising between interacting machines and possible biological applications, such as partitioning of bacterial plasmids.

US Navy Littoral Combat Ship (LCS) Capabilities, Risks, Possible Missions, and Modules to Support Future USMC Operating Concepts

DTIC Science & Technology

2011-07-29

squad Armament: M60 7 .62mm machine gun , MK19 40mm, M2 .50 caL machine gun 61 "Spartan Scout Unmanned Surface Vehicle (USV)," Defense Industry...1) RQ-8B Fire Scout helicopter (VTUAV) a) EO/IR/LD sensor and datalink relay 2) MH-60R/S helicopters a) GAU 16/19 machine gun b) AGM-114 Hellfire...60Rhelicopter car1ies the a .50 caliber OAU 16/A machine gun , a crew-served, recoil operated, belt-fed, air cooled, percussion fired weapon, with a rate of fire

L'Ordine Nuovo: The Legacy of Antonio Gramsci and the Education of Adults.

ERIC Educational Resources Information Center

Armstrong, Paul F.

1988-01-01

The author presents a biography of Antonio Gramsci and discusses the influence of Karl Marx on Gramsci's key ideas concerning mode of production, superstructure, hegemony, consciousness, praxis, and intellectuals. Gramsci's emphasis on adult education for socialism is discussed. (CH)

Murphy's Moral Economy of Labor.

ERIC Educational Resources Information Center

Masters, Roger D.

1996-01-01

Praises and summarizes James Bernard Murphy's "The Moral Economy of Labor: Aristotelian Themes in Economic Theory." Linking economic theories from Adam Smith to Karl Marx, Murphy criticizes traditional economic and social thinking regarding the division of labor. He proposes an integration of conceptualization and execution to humanize…

Marxism and Communication.

ERIC Educational Resources Information Center

Daley, Patrick J.; Soloski, John

Karl Marx and Friedrich Engels had little to say specifically about communication and language, but their works hint at the direction their critique of communication might have taken. Language and consciousness are conditioned by specific means of production and sociopolitical circumstances and are therefore ideological. The domain of ideology…

Social Marxism, class conflict and health care.

PubMed

Alaszewski, A; Manthorpe, J

In the first of a six-part series the sociological theories of Karl Marx are examined and related to the purported neutrality of medicine. The role of nursing within a Marxist analysis of the world is considered, and the value of such analysis is described.

Urban Schools' Teachers Enacting Project-Based Science

ERIC Educational Resources Information Center

Tal, Tali; Krajcik, Joseph S.; Blumenfeld, Phyllis C.

2006-01-01

What teaching practices foster inquiry and promote students to learn challenging subject matter in urban schools? Inquiry-based instruction and successful inquiry learning and teaching in project-based science (PBS) were described in previous studies (Brown & Campione, [1990]; Crawford, [1999]; Krajcik, Blumenfeld, Marx, Bass, & Fredricks,…

Bacteriological findings in patients with bone marrow transplantation (Karl Marx University Leipzig, 1985-1987).

PubMed

Wonitzki, C; Hoffmann, F A

1989-01-01

The results of the bacteriological surveillance cultures for 26 patients with bone marrow transplantation (Karl Marx University Leipzig, G.D.R., 1985-1987) are presented. 5.9% of all surveillance cultures contained facultatively pathogenic germs (with Pseudomonas aeruginosa as the most frequent representative, which was the reason of a sepsis in two patients). Coagulasenegative Staphylococci and other germs with an obscure pathogenicity were isolated upon a large scale, especially from the mucous membrane regions. There are hints, that above all special strains of coagulasenegative Staphylococci "colonize" the patient's body (also for longer periods) and turn into the blood too. During the total decontamination intestinal anaerobic flora is absent. After closing of total decontamination Clostridium perfringens is the first detectable anaerobic species. During the selective decontamination systemic applications of antibiotics are able to obliterate anaerobic findings for certain periods. Recommendations for an effective arrangement of the surveillance cultures of bone marrow transplantation patients are given.

Petawatt pulsed-power accelerator

DOEpatents

Stygar, William A.; Cuneo, Michael E.; Headley, Daniel I.; Ives, Harry C.; Ives, legal representative; Berry Cottrell; Leeper, Ramon J.; Mazarakis, Michael G.; Olson, Craig L.; Porter, John L.; Wagoner; Tim C.

2010-03-16

A petawatt pulsed-power accelerator can be driven by various types of electrical-pulse generators, including conventional Marx generators and linear-transformer drivers. The pulsed-power accelerator can be configured to drive an electrical load from one- or two-sides. Various types of loads can be driven; for example, the accelerator can be used to drive a high-current z-pinch load. When driven by slow-pulse generators (e.g., conventional Marx generators), the accelerator comprises an oil section comprising at least one pulse-generator level having a plurality of pulse generators; a water section comprising a pulse-forming circuit for each pulse generator and a level of monolithic triplate radial-transmission-line impedance transformers, that have variable impedance profiles, for each pulse-generator level; and a vacuum section comprising triplate magnetically insulated transmission lines that feed an electrical load. When driven by LTD generators or other fast-pulse generators, the need for the pulse-forming circuits in the water section can be eliminated.

Quetelet and the emergence of the behavioral sciences.

PubMed

Jahoda, Gustav

2015-01-01

Adolphe Quetelet was one of the most prominent figures of the second half of the nineteenth century, yet in present-day histories of several social sciences the impact of his ideas is widely ignored. The first part consists of a sketch of his life and work. Astronomer and statistician, he sought to apply the mathematical tools of astronomy to create was has been called a 'mathematics of society'. In particular he demonstrated regularities in the incidence of various social phenomena, notably crime, whose implications were widely debated. In the second part the influence he exerted on some key figures in the then emerging social sciences is traced in some detail; these figures include Durkheim, Galton, Marx, and Tylor. He also advocated the wider use of statistics and his call had a powerful impact on the then emerging fields such as administration, economics, sociology and psychology. He influenced some of his most famous contemporaries, including Florence Nightingale, Karl Marx and Francis Galton.

Methods, systems and apparatus for adjusting modulation index to improve linearity of phase voltage commands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallegos-Lopez, Gabriel; Perisic, Milun; Kinoshita, Michael H.

2017-03-14

Embodiments of the present invention relate to methods, systems and apparatus for controlling operation of a multi-phase machine in a motor drive system. The disclosed embodiments provide a mechanism for adjusting modulation index of voltage commands to improve linearity of the voltage commands.

Applied Physics Modules: Notes, Instructions, Data Sheets, Tests, and Test Answer Keys.

ERIC Educational Resources Information Center

Southeast Community Coll., Lincoln, NE.

These user instructions and related materials are designed to accompany a series of twenty-three applied physics modules which have been developed for postsecondary students in electrical, electronics, machine tool, metals, manufacturing, automotive, diesel, architecture, and civil drafting occupational programs. The instructions include an…

Applied Physics Modules Selected for Manufacturing and Metal Technologies.

ERIC Educational Resources Information Center

Waring, Gene

Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of eighteen learning modules is equivalent to the content of two quarters of a five-credit hour class in manufacturing engineering technology, machine tool and design technology, welding technology, and industrial plastics…

A high reliability module with thermoelectric device by molding technology for M2M wireless sensor network

NASA Astrophysics Data System (ADS)

Nakagawa, K.; Tanaka, T.; Suzuki, T.

2015-10-01

This paper presents the fabrication of a new energy harvesting module that uses a thermoelectric device (TED) by using molding technology. Through molding technology, the TED and circuit board can be properly protected and a heat-radiating fin structure can be simultaneously constructed. The output voltage per heater temperature of the TED module at 20 °C ambient temperature is 8 mV K-1, similar to the result with the aluminum heat sink which is almost the same fin size as the TED module. The accelerated environmental tests are performed on a damp heat test, which is an aging test under high temperature and high humidity, highly accelerated temperature, and humidity stress test (HAST) for the purpose of evaluating the electrical reliability in harsh environments, cold test and thermal cycle test to evaluate degrading characteristics by cycling through two temperatures. All test results indicate that the TED and circuit board can be properly protected from harsh temperature and humidity by using molding technology because the output voltage of after-tested modules is reduced by less than 5%. This study presents a novel fabrication method for a high reliability TED-installed module appropriate for Machine to Machine wireless sensor networks.

Foundations of Job Satisfaction in the Media Industries.

ERIC Educational Resources Information Center

DeFleur, Margaret H.

1992-01-01

Examines classic sources on job satisfaction, including Adam Smith, Karl Marx, and the Hawthorne studies. Studies the job satisfaction of 1,526 mass communication graduates and compares satisfaction levels across the 9 different media fields. Finds a clear hierarchy of satisfaction within the nine fields. (SR)

Iroquois Contributions to Modern Democracy and Communism.

ERIC Educational Resources Information Center

Bagley, Carol L.; Ruckman, Jo Ann

1983-01-01

Considers the influence of the Iroquois Great Law of Peace in American government and its possible influence on Russian government. Discusses history of Iroquois society and describes their form of representative democracy. Cites references to Iroquois government and law by Karl Marx, Frederick Engels, and Benjamin Franklin. (JHZ)

Alienation, Mass Society and Mass Culture.

ERIC Educational Resources Information Center

Dam, Hari N.

This monograph examines the nature of alienation in mass society and mass culture. Conceptually based on the "Gemeinschaft-Gesellschaft" paradigm of sociologist Ferdinand Tonnies, discussion traces the concept of alienation as it appears in the philosophies of Hegel, Marx, Kierkegaard, Sartre, and others. Dwight Macdonald's "A Theory of Mass…

High-voltage pulse generator developed for wide-gap spark chambers

NASA Technical Reports Server (NTRS)

Keller, L. P.; Walschon, E. G.

1968-01-01

Low-inductance, high-capacitance Marx pulse generator provides for minimization of internal inductance and suppression of external electromagnetic radiation. The spark gaps of the generator are enclosed in a pressurized nitrogen atmosphere which allows the charging voltage to be varied by changing the nitrogen pressure.

The Problem is People, Social Studies: 6425.07.

ERIC Educational Resources Information Center

Ratchford, Frank

Population education is the focus of this quinmester curriculum guide for secondary students. By examining and comparing past population theories of Malthus and Marx with present theories students will better understand the present situation, cultural attitudes toward the problems, and the ecological consequences of overpopulation. Objectives are…

Automated Coal-Mining System

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Isenberg, L.; Lewis, E. V.

1985-01-01

Proposed system offers safety and large return on investment. System, operating by year 2000, employs machines and processes based on proven principles. According to concept, line of parallel machines, connected in groups of four to service modules, attacks face of coal seam. High-pressure water jets and central auger on each machine break face. Jaws scoop up coal chunks, and auger grinds them and forces fragments into slurry-transport system. Slurry pumped through pipeline to point of use. Concept for highly automated coal-mining system increases productivity, makes mining safer, and protects health of mine workers.

Mask induction despite circuit obstruction: an unrecognized hazard of relying on automated machine check technology.

PubMed

Yang, Kamie K; Lewis, Ian H

2014-06-15

Various equipment malfunctions of anesthesia gas delivery systems have been previously reported. Our profession increasingly uses technology as a means to prevent these errors. We report a case of a near-total anesthesia circuit obstruction that went undetected before the induction of anesthesia despite the use of automated machine check technology. This case highlights that automated machine check modules can fail to detect severe equipment failure and demonstrates how, even in this era of expanding technology, manual checks still remain essential components of safe care.

The phaco machine: analysing new technology.

PubMed

Fishkind, William J

2013-01-01

The phaco machine is frequently overlooked as the crucial surgical instrument it is. Understanding how to set parameters is initiated by understanding fundamental concepts of machine function. This study analyses the critical concepts of partial occlusion phaco, occlusion phaco and pump technology. In addition, phaco energy categories as well as variations of phaco energy production are explored. Contemporary power modulations and pump controls allow for the enhancement of partial occlusion phacoemulsification. These significant changes in the anterior chamber dynamics produce a balanced environment for phaco; less complications; and improved patient outcomes.

Operative management of partial-thickness tears of the proximal hamstring muscles in athletes.

PubMed

Bowman, Karl F; Cohen, Steven B; Bradley, James P

2013-06-01

Partial tears of the hamstring muscle origin represent a challenging clinical problem to the patient and orthopaedic surgeon. Although nonoperative treatment is frequently met with limited success, there is a paucity of data on the efficacy of surgical management for partial proximal hamstring tears in the active and athletic population. To evaluate the results of an anatomic repair for partial tears of the hamstring muscle origin in athletes. Case series; Level of evidence, 4. The records of 17 patients with partial tears of the proximal hamstring origin were reviewed after institutional review board approval was obtained. All patients were treated with open debridement and primary tendon repair after failure of at least 6 months of nonoperative therapy. Clinical and operative records, radiographs, and magnetic resonance images were reviewed for all patients. A patient-reported outcomes survey was completed by 14 patients that included the Lower Extremity Functional Score (LEFS), Marx activity rating scale, custom LEFS and Marx scales, and subjective patient satisfaction scores. Early and late postoperative complications were recorded. There were 3 male and 14 female patients; their average age was 43 years (range, 19-64 years) and average follow-up was 32 months (range, 12-51 months). There were 2 collegiate athletes (field hockey, track), 14 amateur athletes (distance running, waterskiing, tennis), and a professional bodybuilder. Postoperative LEFS was 73.3 ± 9.9 (range, 50-80) and custom LEFS was 66.7 ± 17.0 (range, 37-80) of a maximum 80 points. The most commonly reported difficulty was with prolonged sitting and explosive direction change while running. The average Marx score was 6.5 ± 5.3 (range, 0-16) of a maximum 16, correlating with a greater return to recreational running activities in this patient cohort than regular participation in pivoting or cutting sports. Marx custom scores were 20 of a maximum 20 in all patients, demonstrating no disability in the operative extremity with activities of daily living. No patient underwent a subsequent surgery. One patient was not satisfied with the result and reported persistent symptoms during competitive distance running. All patients were able to return to their preoperative level of activity after surgery. Anatomic surgical treatment of partial proximal hamstring avulsions can lead to satisfactory functional outcomes, a high rate of return to athletic activity, and low complication rate. This procedure should be reserved for patients who have failed an extended course of nonoperative treatment, and the proximity of the sciatic nerve mandates a careful assessment of the risk-benefit ratio before surgery is undertaken.

P-23 Highlights 6/10/12: Cygnus Dual Beam Radiographic Facility Refurbishment completed at U1A tunnel in Nevada NNSS meeting Level 2 milestone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deyoung, Anemarie; Smith, John R.

2012-05-03

A moratorium was placed on U.S. underground nuclear testing in 1992. In response, the Stockpile Stewardship Program was created to maintain readiness of the existing nuclear inventory through several efforts such as computer modeling, material analysis, and subcritical nuclear experiments (SCEs). As in the underground test era, the Nevada National Security Site (NNSS), formerly the Nevada Test Site, provides a safe and secure environment for SCEs by the nature of its isolated and secure facilities. A major tool for SCE diagnosis installed in the 05 drift laboratory is a high energy x-ray source used for time resolved imaging. This toolmore » consists of two identical sources (Cygnus 1 and Cygnus 2) and is called the Cygnus Dual Beam Radiographic Facility (Figs. 2-6). Each Cygnus machine has 5 major elements: Marx Generator, Pulse Forming Line (PFL), Coaxial Transmission Line (CTL), 3-cell Inductive Voltage Adder (IVA), and Rod Pinch Diode. Each machine is independently triggered and may be fired in separate tests (staggered mode), or in a single test where there is submicrosecond separation between the pulses (dual mode). Cygnus must operate as a single shot machine since on each pulse the diode electrodes are destroyed. The diode is vented to atmosphere, cleaned, and new electrodes are inserted for each shot. There is normally two shots per day on each machine. Since its installation in 2003, Cygnus has participated in: 4 Subcritical Experiments (Armando, Bacchus, Barolo A, and Barolo B), a 12 shot plutonium physics series (Thermos), and 2 plutonium step wedge calibration series (2005, 2011), resulting in well over 1000 shots. Currently the Facility is in preparation for 2 SCEs scheduled for this calendar year - Castor and Pollux. Cygnus has performed well during 8 years of operations at NNSS. Many improvements in operations and performance have been implemented during this time. Throughout its service at U1a, major maintenance and replacement of many hardware items were delayed due to programmatic requirements. It is anticipated that Cygnus will be in service at U1a for another 5 years. With this assumption, it was realized that significant resources and effort should be allotted to bring the hardware back to its original condition, or even to improve elements when appropriate. The Cygnus Refurbishment and Enhancement Project started in April, 2011 with the intent to encompass a major overhaul of Cygnus.« less

Methods, systems and apparatus for adjusting duty cycle of pulse width modulated (PWM) waveforms

DOEpatents

Gallegos-Lopez, Gabriel; Kinoshita, Michael H; Ransom, Ray M; Perisic, Milun

2013-05-21

Embodiments of the present invention relate to methods, systems and apparatus for controlling operation of a multi-phase machine in a vector controlled motor drive system when the multi-phase machine operates in an overmodulation region. The disclosed embodiments provide a mechanism for adjusting a duty cycle of PWM waveforms so that the correct phase voltage command signals are applied at the angle transitions. This can reduce variations/errors in the phase voltage command signals applied to the multi-phase machine so that phase current may be properly regulated thus reducing current/torque oscillation, which can in turn improve machine efficiency and performance, as well as utilization of the DC voltage source.

Method and apparatus for suppressing regenerative instability and related chatter in machine tools

DOEpatents

Segalman, Daniel J.; Redmond, James M.

2001-01-01

Methods of and apparatuses for mitigating chatter vibrations in machine tools or components thereof. Chatter therein is suppressed by periodically or continuously varying the stiffness of the cutting tool (or some component of the cutting tool), and hence the resonant frequency of the cutting tool (or some component thereof). The varying of resonant frequency of the cutting tool can be accomplished by modulating the stiffness of the cutting tool, the cutting tool holder, or any other component of the support for the cutting tool. By periodically altering the impedance of the cutting tool assembly, chatter is mitigated. In one embodiment, a cyclic electric (or magnetic) field is applied to the spindle quill which contains an electro-rheological (or magneto-rheological) fluid. The variable yield stress in the fluid affects the coupling of the spindle to the machine tool structure, changing the natural frequency of oscillation. Altering the modal characteristics in this fashion disrupts the modulation of current tool vibrations with previous tool vibrations recorded on the workpiece surface.

Method and apparatus for suppressing regenerative instability and related chatter in machine tools

DOEpatents

Segalman, Daniel J.; Redmond, James M.

1999-01-01

Methods of and apparatuses for mitigating chatter vibrations in machine tools or components thereof. Chatter therein is suppressed by periodically or continuously varying the stiffness of the cutting tool (or some component of the cutting tool), and hence the resonant frequency of the cutting tool (or some component thereof). The varying of resonant frequency of the cutting tool can be accomplished by modulating the stiffness of the cutting tool, the cutting tool holder, or any other component of the support for the cutting tool. By periodically altering the impedance of the cutting tool assembly, chatter is mitigated. In one embodiment, a cyclic electric (or magnetic) field is applied to the spindle quill which contains an electro-rheological (or magneto-rheological) fluid. The variable yield stress in the fluid affects the coupling of the spindle to the machine tool structure, changing the natural frequency of oscillation. Altering the modal characteristics in this fashion disrupts the modulation of current tool vibrations with previous tool vibrations recorded on the workpiece surface.

Pole-phase modulated toroidal winding for an induction machine

DOEpatents

Miller, John Michael; Ostovic, Vlado

1999-11-02

A stator (10) for an induction machine for a vehicle has a cylindrical core (12) with inner and outer slots (26, 28) extending longitudinally along the inner and outer peripheries between the end faces (22, 24). Each outer slot is associated with several adjacent inner slots. A plurality of toroidal coils (14) are wound about the core and laid in the inner and outer slots. Each coil occupies a single inner slot and is laid in the associated outer slot thereby minimizing the distance the coil extends from the end faces and minimizing the length of the induction machine. The toroidal coils are configured for an arbitrary pole phase modulation wherein the coils are configured with variable numbers of phases and poles for providing maximum torque for cranking and switchable to a another phase and pole configuration for alternator operation. An adaptor ring (36) circumferentially positioned about the stator improves mechanical strength, and provides a coolant channel manifold (34) for removing heat produced in stator windings during operation.

Robust free-space optical communication for indoor information environment

NASA Astrophysics Data System (ADS)

Nakada, Toyohisa; Itoh, Hideo; Kunifuji, Susumu; Nakashima, Hideyuki

2003-10-01

The purpose of our study is to establish a robust communication, while keeping security and privacy, between a handheld communicator and the surrounding information environment. From the viewpoint of low power consumption, we have been developing a reflectivity modulating communication module composed of a liquid crystal light modulator and a corner-reflecting mirror sheet. We installed a corner-reflecting sheet instead of light scattering sheet in a handheld videogame machine with a display screen with a reflection-type liquid crystal. Infrared (IR) LED illuminator attached next to the IR camera of a base station illuminates all the room, and the terminal send their data to the base station by switching ON and OFF of the reflected IR beam. Intensity of reflected light differs with the position and the direction of the terminal, and sometimes the intensity of OFF signal at a certain condition is brighter than that of ON signal at another condition. To improve the communication quality, use of machine learning technique is a possibility of the solution. In this paper, we compare various machine learning techniques for the purpose of free space optical communication, and propose a new algorithm that improves the robustness of the data link. Evaluation using an actual free-space communication system is also described.

Teaching High School Students Machine Learning Algorithms to Analyze Flood Risk Factors in River Deltas

NASA Astrophysics Data System (ADS)

Rose, R.; Aizenman, H.; Mei, E.; Choudhury, N.

2013-12-01

High School students interested in the STEM fields benefit most when actively participating, so I created a series of learning modules on how to analyze complex systems using machine-learning that give automated feedback to students. The automated feedbacks give timely responses that will encourage the students to continue testing and enhancing their programs. I have designed my modules to take the tactical learning approach in conveying the concepts behind correlation, linear regression, and vector distance based classification and clustering. On successful completion of these modules, students will learn how to calculate linear regression, Pearson's correlation, and apply classification and clustering techniques to a dataset. Working on these modules will allow the students to take back to the classroom what they've learned and then apply it to the Earth Science curriculum. During my research this summer, we applied these lessons to analyzing river deltas; we looked at trends in the different variables over time, looked for similarities in NDVI, precipitation, inundation, runoff and discharge, and attempted to predict floods based on the precipitation, waves mean, area of discharge, NDVI, and inundation.

Evolutionary Trends and the Salience Bias (with Apologies to Oil Tankers, Karl Marx, and Others).

ERIC Educational Resources Information Center

McShea, Daniel W.

1994-01-01

Examines evolutionary trends, specifically trends in size, complexity, and fitness. Notes that documentation of these trends consists of either long lists of cases, or descriptions of a small number of salient cases. Proposes the use of random samples to avoid this "saliency bias." (SR)

Foreign Language Study in Budapest.

ERIC Educational Resources Information Center

Feinberg, Lilian O.; Tarjan, Jeno

1968-01-01

Foreign language study at the Karl Marx University of Economic Sciences in Budapest aims to develop the ability to use the language as a native would in a particular business or profession, and to help the student become fully aware of the political, historical, sociological, and geographical background of the foreign country and the…

Marx and Skinner: Race Relations and Strange Bedfellows.

ERIC Educational Resources Information Center

Rosen, Gerald

This paper places race relations theory within the general theory of human behavior which combines behaviorist psychology and Marxist theory. It argues for a revisionist theory of race relations where a situation or condition leads to a behavior pattern (discrimination) which in turn leads to an attitude (racism or prejudice). This…

Karl Marx, Ludwig Wittgenstein, and Black Underachievement in the United States and United Kingdom

ERIC Educational Resources Information Center

Tomlin, Carol; Wright, Cecile; Mocombe, Paul C.

2013-01-01

This article synthesizes Marxian conceptions of identity construction within capitalist relations of production with the Wittgensteinian notion of "language games" to offer a more appropriate relational framework within which scholars ought to understand the Black-White academic achievement gap in America, the United Kingdom, and…

Economics with a Sense of Humor.

ERIC Educational Resources Information Center

Keenan, Diane

1985-01-01

In this humorous dialogue that can be read and acted out as a play in high school economics classes, Karl Marx, a spokesman for communism, and Adam Smith, the father of capitalism, debate (1) whether an economy should produce designer jeans and (2) who should own McDonald's restaurant. (RM)

Nature, Human Nature, and Solutions to Problems.

ERIC Educational Resources Information Center

Pedrini, D. T.; Pedrini, B. C.

This paper promotes an undergraduate course that would discuss the great ideas of Plato, St. Paul, Karl Marx, Sigmund Freud, Jean Paul Sartre, B. F. Skinner, and Konrad Lorenz. This course would help students understand human values and behaviors while focusing on historical, world, and national problems. Tentative solutions would then be…

The Art of Self-Reflection

ERIC Educational Resources Information Center

Villano, Matt

2006-01-01

Metaphysically speaking, the idea of self-reflection has been the subject of discussion for thousands of years. The idea carried human beings through the Renaissance, and an entire movement tied to it sparked a sociopolitical movement called the Enlightenment. In more recent times, thought leaders such as Immanuel Kant, Karl Marx, and Sigmund…

Labor Market Characteristics and the Labor Force Participation of Individuals,

DTIC Science & Technology

1981-11-01

Bass, 1970, pp. 38-47. Durkheim , Emile , Les Regles del la Methode Sociologieque, Paris, F. Alcan, 1895. Fuguitt, Glenn and Stanley Lieberson...and conditioned by the cultural (e.g., Durkheim , 1895) or material (e.g., Marx and Engels, 1922) conditions of the collectivities in which people live

Surveying Graduate Students' Attitudes and Approaches to Problem Solving

ERIC Educational Resources Information Center

Mason, Andrew; Singh, Chandralekha

2010-01-01

Students' attitudes and approaches to problem solving in physics can profoundly influence their motivation to learn and development of expertise. We developed and validated an Attitudes and Approaches to Problem Solving survey by expanding the Attitudes toward Problem Solving survey of Marx and Cummings and administered it to physics graduate…

On the Mo-Papas equation

NASA Astrophysics Data System (ADS)

Aguirregabiria, J. M.; Chamorro, A.; Valle, M. A.

1982-05-01

A new heuristic derivation of the Mo-Papas equation for charged particles is given. It is shown that this equation cannot be derived for a point particle by closely following Dirac's classical treatment of the problem. The Mo-Papas theory and the Bonnor-Rowe-Marx variable mass dynamics are not compatible.

Why Read the Great 19th-Century Historians?

ERIC Educational Resources Information Center

Clive, John

1978-01-01

Clive comments on the literary power of Karl Marx (The Eighteenth Brumaire of Louis Napoleon), Alexis de Tocqueville (The Old Regime and the Revolution), Thomas Carlyle (French Revolution), and Jakob Burkhardt (The Civilization of the Renaissance in Italy); and notes Macaulay's sensitivity to the "public mind" (History of England). (SJL)

An Enhanced Studio Physics Model: Which Technologies are Productive?

ERIC Educational Resources Information Center

MacKinnon, Gregory R.; Williams, Peter

2006-01-01

The notion of problem-based physics laboratories enhanced by computer technology has been coined "studio physics" (Wilson, 1994) and has been practised at various institutions for some time (Cummings, Marx, Thornton, & Kuhl, 1999; Williams, MacLatchy, Backman, & Retson, 1997). In recent years, new technology tools have been available to supplement…

Lenin: An Activist Burdened by a Passivist Philosophy.

ERIC Educational Resources Information Center

Johnson, Karen S.

The paper discusses Lenin's attempts to alleviate discrepancies between Marxist philosophy and his own personal activist creed by, first, introducing Hegelian logic into dialectical materialism and, second, by creating an ideology of organizational activity. Lenin the man is examined in order to understand his interpretation of Marx and the gap…

Critical Theory: Implications for School Leadership Theory and Practice.

ERIC Educational Resources Information Center

Peca, Kathy

The school leader's behaviors are inspired by theories, and theories are intrinsic to practice. This paper provides an overview of an emerging perspective in educational administration, critical theory. The paper first highlights the philosophies of Immanuel Kant, Fichte, Hegel, Marx, and the Frankfurt School. It then discusses critical theory…

Knowledge Production in Small and Medium Sized Enterprises

ERIC Educational Resources Information Center

Van der Meer, Han

2010-01-01

This article presents the author's response to Hisham B. Ghassib's (2010) article entitled "Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?" When the author tries to characterise Ghassib's (2010) world, three words come into mind: University, Scientific Knowledge, and Marx. The author's world on the other…

"Wo Es War": Psychoanalysis, Marxism, and Subjectivity

ERIC Educational Resources Information Center

Cho, Daniel

2007-01-01

Subjectivity, for Descartes, emerged when he doubted the veracity of his knowledge. Instead of truth, he counted this knowledge to be inherited myth. Cartesian subjectivity has been helpful for forming a critical education predicated on doubting ideology and hegemony. But Marx indicates a very different kind of knowledge in his analysis of…

Sociological Aspects of Deafness.

ERIC Educational Resources Information Center

World Federation of the Deaf, Rome (Italy).

Nine conference papers treat the sociological aspects of deafness. Included are "Individuals Being Deaf and Blind and Living with a Well Hearing Society" by A. Marx (German Federal Republic), "A Deaf Man's Experiences in a Hearing World" by A. B. Simon(U.S.A.), "Problem of Text Books and School Appliances for Vocational…

Economic Heritage: Adam Smith vs. Karl Marx

ERIC Educational Resources Information Center

Manton, Edgar J.; English, Donald E.

2008-01-01

The problem of this study was to determine the number of first semester college freshmen who could correctly identify the individuals who are generally considered the "fathers" of communism and capitalism. A questionnaire was administered to 241 freshmen students enrolled in English 101, College Reading and Writing, at Texas A&M…

A Revised Marxist Political Economy of National Education Markets

ERIC Educational Resources Information Center

Marginson, Simon

2004-01-01

This article synthesises the social and economic dynamics of both non-market and market production in national education systems, drawing primarily on Marx's analysis of the commodity and Hirsch on positional competition. Market production has six principal aspects: a defined field of production, protocols governing entry/exit, the production of…

Learning to Compute: Computerization and Ordinary, Everyday Life

ERIC Educational Resources Information Center

Sullivan, Joseph F.

2009-01-01

This study utilizes the basic framework of classical sociology as a foundation for examining the intersection of the structural history of the computer revolution with ordinary, everyday life. Just as the classical forefathers of modern sociology--Marx, Durkheim, and Weber--attempted to understand their eras of structural transformation, this…

Design and Experimental Validation for Direct-Drive Fault-Tolerant Permanent-Magnet Vernier Machines

PubMed Central

Liu, Guohai; Yang, Junqin; Chen, Ming; Chen, Qian

2014-01-01

A fault-tolerant permanent-magnet vernier (FT-PMV) machine is designed for direct-drive applications, incorporating the merits of high torque density and high reliability. Based on the so-called magnetic gearing effect, PMV machines have the ability of high torque density by introducing the flux-modulation poles (FMPs). This paper investigates the fault-tolerant characteristic of PMV machines and provides a design method, which is able to not only meet the fault-tolerant requirements but also keep the ability of high torque density. The operation principle of the proposed machine has been analyzed. The design process and optimization are presented specifically, such as the combination of slots and poles, the winding distribution, and the dimensions of PMs and teeth. By using the time-stepping finite element method (TS-FEM), the machine performances are evaluated. Finally, the FT-PMV machine is manufactured, and the experimental results are presented to validate the theoretical analysis. PMID:25045729

Radial-piston pump for drive of test machines

NASA Astrophysics Data System (ADS)

Nizhegorodov, A. I.; Gavrilin, A. N.; Moyzes, B. B.; Cherkasov, A. I.; Zharkevich, O. M.; Zhetessova, G. S.; Savelyeva, N. A.

2018-01-01

The article reviews the development of radial-piston pump with phase control and alternating-flow mode for seismic-testing platforms and other test machines. The prospects for use of the developed device are proved. It is noted that the method of frequency modulation with the detection of the natural frequencies is easily realized by using the radial-piston pump. The prospects of further research are given proof.

A Megawatt Power Module for Ship Service - Supplement. Volume 1: Program Technical Report

DTIC Science & Technology

2007-06-01

Alternator” otherwise known as an “AC Homopolar ” or “Synchronous Homopolar ” machine for this application. The various motor /generator machine...After reviewing alternative motor /generator technologies as discussed above, a Homopolar Inductor Alternator (HIA) was selected for the technology...integrated flywheel energy storage system with homopolar inductor motor /generator and high-frequency drive”, Industry Applications, IEEE Transactions on

Reactive power generation in high speed induction machines by continuously occurring space-transients

NASA Astrophysics Data System (ADS)

Laithwaite, E. R.; Kuznetsov, S. B.

1980-09-01

A new technique of continuously generating reactive power from the stator of a brushless induction machine is conceived and tested on a 10-kw linear machine and on 35 and 150 rotary cage motors. An auxiliary magnetic wave traveling at rotor speed is artificially created by the space-transient attributable to the asymmetrical stator winding. At least two distinct windings of different pole-pitch must be incorporated. This rotor wave drifts in and out of phase repeatedly with the stator MMF wave proper and the resulting modulation of the airgap flux is used to generate reactive VA apart from that required for magnetization or leakage flux. The VAR generation effect increases with machine size, and leading power factor operation of the entire machine is viable for large industrial motors and power system induction generators.

Methods and apparatus for controlling rotary machines

DOEpatents

Bagepalli, Bharat Sampathkumaran [Niskayuna, NY; Jansen, Patrick Lee [Scotia, NY; Barnes, Gary R [Delanson, NY; Fric, Thomas Frank [Greer, SC; Lyons, James Patrick Francis [Niskayuna, NY; Pierce, Kirk Gee [Simpsonville, SC; Holley, William Edwin [Greer, SC; Barbu, Corneliu [Guilderland, NY

2009-09-01

A control system for a rotary machine is provided. The rotary machine has at least one rotating member and at least one substantially stationary member positioned such that a clearance gap is defined between a portion of the rotating member and a portion of the substantially stationary member. The control system includes at least one clearance gap dimension measurement apparatus and at least one clearance gap adjustment assembly. The adjustment assembly is coupled in electronic data communication with the measurement apparatus. The control system is configured to process a clearance gap dimension signal and modulate the clearance gap dimension.

A Multimodal Dialog System for Language Assessment: Current State and Future Directions. Research Report. ETS RR-17-21

ERIC Educational Resources Information Center

Suendermann-Oeft, David; Ramanarayanan, Vikram; Yu, Zhou; Qian, Yao; Evanini, Keelan; Lange, Patrick; Wang, Xinhao; Zechner, Klaus

2017-01-01

We present work in progress on a multimodal dialog system for English language assessment using a modular cloud-based architecture adhering to open industry standards. Among the modules being developed for the system, multiple modules heavily exploit machine learning techniques, including speech recognition, spoken language proficiency rating,…

Virtual Reality Simulations and Animations in a Web-Based Interactive Manufacturing Engineering Module

ERIC Educational Resources Information Center

Ong, S. K.; Mannan, M. A.

2004-01-01

This paper presents a web-based interactive teaching package that provides a comprehensive and conducive yet dynamic and interactive environment for a module on automated machine tools in the Manufacturing Division at the National University of Singapore. The use of Internet technologies in this teaching tool makes it possible to conjure…

Troubleshooting of an Electromechanical System (Westinghouse PLC Controlling a Pneumatic Robot). High-Technology Training Module.

ERIC Educational Resources Information Center

Tucker, James D.

This training module on the troubleshooting of an electromechanical system, The Westinghouse Programmable Logic Controller (PLC) controlling a pneumatic robot, is used for a troubleshooting unit in an electromechanical systems/robotics and automation systems course. In this unit, students locate and repair a defect in a PLC-operated machine. The…

Analysis of spectrally resolved autofluorescence images by support vector machines

NASA Astrophysics Data System (ADS)

Mateasik, A.; Chorvat, D.; Chorvatova, A.

2013-02-01

Spectral analysis of the autofluorescence images of isolated cardiac cells was performed to evaluate and to classify the metabolic state of the cells in respect to the responses to metabolic modulators. The classification was done using machine learning approach based on support vector machine with the set of the automatically calculated features from recorded spectral profile of spectral autofluorescence images. This classification method was compared with the classical approach where the individual spectral components contributing to cell autofluorescence were estimated by spectral analysis, namely by blind source separation using non-negative matrix factorization. Comparison of both methods showed that machine learning can effectively classify the spectrally resolved autofluorescence images without the need of detailed knowledge about the sources of autofluorescence and their spectral properties.

Cybernetic prosthesis

NASA Technical Reports Server (NTRS)

Mann, R. W.

1974-01-01

Design and development of a prosthetic device fitted to an above elbow amputee is reported that derives control information from the human to modulate power to an actuator to drive the substitute limb. In turn, the artificial limb generates sensory information feedback to the human nervous system and brain. This synergetic unity feeds efferent or motor control information from the human to the machine, and the machine responds, delivering afferent or sensory information back to the man.

Design and application of electromechanical actuators for deep space missions

NASA Technical Reports Server (NTRS)

Haskew, Tim A.; Wander, John

1993-01-01

The annual report Design and Application of Electromechanical Actuators for Deep Space Missions is presented. The reporting period is 16 Aug. 1992 to 15 Aug. 1993. However, the primary focus will be work performed since submission of our semi-annual progress report in Feb. 1993. Substantial progress was made. We currently feel confident in providing guidelines for motor and control strategy selection in electromechanical actuators to be used in thrust vector control (TVC) applications. A small portion was presented in the semi-annual report. At this point, we have implemented highly detailed simulations of various motor/drive systems. The primary motor candidates were the brushless dc machine, permanent magnet synchronous machine, and the induction machine. The primary control implementations were pulse width modulation and hysteresis current control. Each of the two control strategies were applied to each of the three motor choices. With either pulse width modulation or hysteresis current control, the induction machine was always vector controlled. A standard test position command sequence for system performance evaluation is defined. Currently, we are gathering all of the necessary data for formal presentation of the results. Briefly stated for TVC application, we feel that the brushless dc machine operating under PWM current control is the best option. Substantial details on the topic, with supporting simulation results, will be provided later, in the form of a technical paper prepared for submission and also in the next progress report with more detail than allowed for paper publication.

Performance improvement of 64-QAM coherent optical communication system by optimizing symbol decision boundary based on support vector machine

NASA Astrophysics Data System (ADS)

Chen, Wei; Zhang, Junfeng; Gao, Mingyi; Shen, Gangxiang

2018-03-01

High-order modulation signals are suited for high-capacity communication systems because of their high spectral efficiency, but they are more vulnerable to various impairments. For the signals that experience degradation, when symbol points overlap on the constellation diagram, the original linear decision boundary cannot be used to distinguish the classification of symbol. Therefore, it is advantageous to create an optimum symbol decision boundary for the degraded signals. In this work, we experimentally demonstrated the 64-quadrature-amplitude modulation (64-QAM) coherent optical communication system using support-vector machine (SVM) decision boundary algorithm to create the optimum symbol decision boundary for improving the system performance. We investigated the influence of various impairments on the 64-QAM coherent optical communication systems, such as the impairments caused by modulator nonlinearity, phase skew between in-phase (I) arm and quadrature-phase (Q) arm of the modulator, fiber Kerr nonlinearity and amplified spontaneous emission (ASE) noise. We measured the bit-error-ratio (BER) performance of 75-Gb/s 64-QAM signals in the back-to-back and 50-km transmission. By using SVM to optimize symbol decision boundary, the impairments caused by I/Q phase skew of the modulator, fiber Kerr nonlinearity and ASE noise are greatly mitigated.

Intellectual Freedom and Economic Sufficiency as Educational Entitlements.

ERIC Educational Resources Information Center

Morse, Jane Fowler

2001-01-01

Using the theories of John Stuart Mill and Karl Marx, this article supports the educational entitlements of intellectual freedom and economic sufficiency. Explores these issues in reference to their implications for teaching, the teaching profession and its training. Concludes that ideas cannot be controlled by the interests of the dominant class.…

In the Event of Learning: Alienation and Participative Thinking in Education

ERIC Educational Resources Information Center

Sidorkin, Alexander M.

2004-01-01

This essay begins with Karl Marx's notion of alienation, and then explores a form of alienation specific to education. It examines Mikhail Bakhtin's treatment of alienation in connection with his participative thinking theory and suggests strategies for overcoming educational alienation that are based on Bakhtin's notion of the eventness of Being.…

Competence: Commodification of Human Ability

ERIC Educational Resources Information Center

Han, Soonghee

2008-01-01

The purpose of this article is to analyze the meaning and presumptions of competence in the concrete context of knowledge capitalism. First, the nature of competence as a "commodification of human ability" that obtains a standardized monetary value to sell in the labor market, is elucidated by applying Karl Marx's critical theory. Second, it is…

Semantic Elements in Deep Structures as Seen from a Modernist Definition of Clarity.

ERIC Educational Resources Information Center

Lemke, Alan

Typically, teachers approach ambiguity in student writing by suggesting that students focus on diction, syntax, and writing format; however, the works of modernists (including T.S. Eliot, Ludwig Wittgenstein, Karl Marx, and Pablo Picasso) suggest the importance of conceptions of semantic clarity. Transformational models for syntactic elements in…

Planning, Decisions, and Human Nature.

ERIC Educational Resources Information Center

Keller, George

1998-01-01

Brings the perspectives of five individuals (Sigmund Freud, Karl Marx, Charles Darwin, Johann von Herder, James Madison) to the question of why humans behave as they do when faced with the need for decision making and change in higher education. Argues that effecting change is easier if leaders attend to the concerns and fears of those affected by…

Searching for the Marxist in Boal.

ERIC Educational Resources Information Center

O'Sullivan, Carmel

2001-01-01

Examines Augusto Boal's relationship to and understanding of Marxism, and its influence on the development of his work. Explains that Boal's reformist politics as reflected in his practice would therefore appear a negation of socialism as Marx conceived it. Concludes Boal's approach appears to encourage people to look for that insight in terms of…

Adolescent Black Males' Drug Trafficking and Addiction: Three Theoretical Perspectives.

ERIC Educational Resources Information Center

Moore, Sharon E.

1995-01-01

Explains the incidence and nature of drug trafficking and chemical dependency among adolescent black males. The paper also discusses the social science theories of Emile Durkheim, Karl Marx, and Molefi Asante to better understand the behaviors, and the consequences of those behaviors, of young black males who participate in drug trafficking. (GR)

The Bourgeoisie Dream Factory: Teaching Marx's Theory of Alienation through an Experiential Activity

ERIC Educational Resources Information Center

Windsor, Elroi J.; Carroll, Alana M.

2015-01-01

Effectively teaching sociological theories to undergraduate students is challenging. Students often enroll in theory courses due to major requirements, not personal interest. Consequently, many students approach the study of theory with anxiety. This study examined the effectiveness of an experiential learning activity designed to teach Karl…

East Europe Report, Political, Sociological and Military Affairs.

DTIC Science & Technology

1983-11-10

34Dialektyka i historia " [Dialectics and History], Lenin was the only one of Marx’s successors to undertake an open dialectic with "Das Kapital" and to...Milan Veres, Yugoslav ambassador in Budapest , and presented him the Order of Flag of the Hungarian People’s Republic. [Text] [AU231531 Belgrade

Critical Social Theory: A Portrait

ERIC Educational Resources Information Center

Torres, Carlos A.

2012-01-01

The term Critical Social Theory is employed in this article following the tradition of the Frankfurt School, and particularly the work of Herbert Marcuse and his interpretation of the political and social philosophy of Hegel and Marx. Discussing the contribution of G.W.F. Hegel to social theory Marcuse argued that: "Hegel's system brings to a…

Transatlantic Dialogue: A Research Exchange; Papers from a Joint Conference (Leeds, England, July 11-13, 1988).

ERIC Educational Resources Information Center

Zukas, Miriam, Ed.

Over 90 papers focus on adult education research. Selected titles include "Karl Marx's Theoretical Contributions to Radical Adult Education" (Allman, Wallis); "Educating Educators" (Armstrong); "Comparative Study of Philosophical Foundations of Adult Education in China and United States" (Bao); "Ethical Value Dilemmas of Professional Adult…

Post-Structuralism and Marxism: Education as Knowledge Capitalism.

ERIC Educational Resources Information Center

Peters, Michael

2003-01-01

Argues for "post-structural Marxism" as the pedagogical practice of reading and rereading Marx in a critical manner. Briefly discusses the concept of the social in the post-modern condition before reviewing relations between post-structuralism and Marxism. Provides an account of Deleuze's Marxism, using it to analyze education as a form…

Becoming through Revolutionary Pedagogy: An Interview with Curry Malott and Derek R. Ford

ERIC Educational Resources Information Center

Wubbena, Zane C.

2016-01-01

In this interview, Curry Malott and Derek R. Ford discuss their new book, "Marx, Capital, and Education: Towards a Critical Pedagogy of Becoming." The interview begins with a general inquiry into their intellectual backgrounds as scholar-activists and, importantly, comrades. The authors then discuss the process of collaborating together…

The Antinomic Condition of the University: "Universal Labour" beyond "Academic Capitalism"

ERIC Educational Resources Information Center

Pavlidis, Periklis

2012-01-01

This paper aims at identifying the characteristics acquired by the university under the regime of academic capitalism. It also attempts to put forward their antinomic relationship to the essential properties of academic activity, perceived in the light of the concept of "universal labour" introduced by Karl Marx. (Contains 1 note.)

Markets, Marx, Modernity and Mathematics Education: A Response to Michael Apple.

ERIC Educational Resources Information Center

Gates, Peter

This paper is a response to Michael Apple's paper, "What Postmodernists Forget: Cultural Capital and Official Knowledge." The paper advocates Michael's identification of the current dangers and processes of the growth of new right ideologies in the development of subjectivity, society, and education. The differences in success in the education…

2. AERIAL VIEW, LOOKING WEST, ALONG FIRST AVENUE NORTH, WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. AERIAL VIEW, LOOKING WEST, ALONG FIRST AVENUE NORTH, WITH BROWN MARX BUILDING (BOTTOM CENTER TO RIGHT), EMPIRE BUILDING (CENTER TOP) WITH ITS TERRACOTTA-CLAD 20TH STREET AND FIRST AVENUE FACADES, AND JOHN HAND BUILDING - Heaviest Corner on Earth (Commercial), First Avenue, North & Twentieth (20th) Street, North, Birmingham, Jefferson County, AL

Alienation and First-Year Student Retention. Professional File. Number 116, Spring 2010

ERIC Educational Resources Information Center

Liu, Richard

2010-01-01

Since Summerskill's study on college attrition forty years ago, the interest in this topic has never waned. This study was particularly interested in the relationship of race to retention. Various theoretical frames of references have been proposed: Price's organization theory, Durkheim's Suicide, and Marx's Alienation have been used to guide…

Sixteen Trends...Their Profound Impact on Our Future

ERIC Educational Resources Information Center

Marx, Gary

2011-01-01

Seismic Shifts. Future Forces. Call them whatever you'd like. The Sixteen Trends revealed in this benchmark book will have a profound impact on our future. Noted futurist, educator, communicator, executive and leadership counsel, author, and international speaker Gary Marx makes the case for those trends and speculates on their implications for…

Karl Marx vs. Adam Smith Revisited

ERIC Educational Resources Information Center

Manton, Edgar J.; English, Donald E.; Flanagan, Jennifer; Dubey, Anvit

2013-01-01

The purpose of this study was to determine whether the ability of freshman college students to identify the founding fathers of free enterprise and of communism has improved. This study is a follow-up to four previous studies. A questionnaire was developed and distributed to College of Business and College of Education & Human Services…

PBFA II, a 100 TW Pulsed Power Driver for the Inertial Confinement Fusion Program

DTIC Science & Technology

1985-06-01

providing a 30 MV, 15 ns output pulse,which accelerates lithium ions. The ions will focus onto a pellet containing deuterium-tritium, producing fusion ... energy . Several research areas will be reviewed: low jitter, highly reliable 370 kJ Marx generators; highly synchronized gas switching at 5 MV; efficient

[Peripartal mortality in an autopsy sample of the Pathologic Institute of the Department of Medicine of the Karl Marx University in Leipzig 1960-1982].

PubMed

Emmrich, P; Wötzel, E

1986-01-01

Between 1960 and 1982 we have autopsied 88 cases of peripartal mortality in the pathological institute of the department of medicine, Karl-Marx-University of Leipzig. According to the legal instruction in the GDR we have subdivided in direct and indirect peripartal death cases (direct and indirect relation between maternal mortality and pregnancy). We have compared both the groups (1960-1969, 1970-1982) and have found: The number of cases with indirect and direct relation between maternal mortality and pregnancy is decreased markedly in the second time period. The composition within the two time groups is very different in respect to the cause of the mortality: Between 1960 and 1969 amnioticfluid embolism, thromboembolism and air embolism, furthermore preeclampsia and their consequences as well as hemorrhages sub partu and postpartum could be found. In the second time group the most frequent causes of peripartal mortality are the different forms of embolism and preeclampsia, but then cases with a indirect relation between mortality and pregnancy with diseases of the cardiopulmonary system and of the kidneys.

A compact, low cost Marx bank for generating capillary discharge plasmas.

PubMed

Dyson, A E; Thornton, C; Hooker, S M

2016-09-01

We describe in detail a low power Compact Marx Bank (CMB) circuit that can provide 20 kV, 500 A pulses of approximately 100-200 ns duration. One application is the generation of capillary discharge plasmas of density ≈10 18 cm -3 used in laser plasma accelerators. The CMB is triggered with a high speed solid state switch and gives a high voltage output pulse with a ns scale rise time into a 50 Ω load (coaxial cable) with <4 ns voltage jitter. Its small size (10 cm  ×  25 cm  ×  5 cm) means that it can be placed right next to the capillary discharge in the target chamber to avoid the need to impedance match. The electrical energy required per discharge is <1 J, and the CMB can be run at shot repetition rates of ≳1 Hz. This low power requirement means that the circuit can easily be powered by a small lead acid battery and, therefore, can be floated relative to laboratory earth. The CMB is readily scalable and pulses >45 kV are demonstrated in air discharges.

A compact, low cost Marx bank for generating capillary discharge plasmas

NASA Astrophysics Data System (ADS)

Dyson, A. E.; Thornton, C.; Hooker, S. M.

2016-09-01

We describe in detail a low power Compact Marx Bank (CMB) circuit that can provide 20 kV, 500 A pulses of approximately 100-200 ns duration. One application is the generation of capillary discharge plasmas of density ≈1018 cm-3 used in laser plasma accelerators. The CMB is triggered with a high speed solid state switch and gives a high voltage output pulse with a ns scale rise time into a 50 Ω load (coaxial cable) with <4 ns voltage jitter. Its small size (10 cm × 25 cm × 5 cm) means that it can be placed right next to the capillary discharge in the target chamber to avoid the need to impedance match. The electrical energy required per discharge is <1 J, and the CMB can be run at shot repetition rates of ≳1 Hz. This low power requirement means that the circuit can easily be powered by a small lead acid battery and, therefore, can be floated relative to laboratory earth. The CMB is readily scalable and pulses >45 kV are demonstrated in air discharges.

Fluence field modulated CT on a clinical TomoTherapy radiation therapy machine

NASA Astrophysics Data System (ADS)

Szczykutowicz, Timothy P.; Hermus, James

2015-03-01

Purpose: The multi-leaf collimator (MLC) assembly present on TomoTherapy (Accuray, Madison WI) radiation therapy (RT) and mega voltage CT machines is well suited to perform fluence field modulated CT (FFMCT). In addition, there is a demand in the RT environment for FFMCT imaging techniques, specifically volume of interest (VOI) imaging. Methods: A clinical TomoTherapy machine was programmed to deliver 30% imaging dose outside predefined VOIs. Four different size ROIs were placed at varying distances from isocenter. Projections intersecting the VOI received "full dose" while those not intersecting the VOI received 30% of the dose (i.e. the incident fluence for non VOI projections was 30% of the incident fluence for projections intersecting the VOI). Additional scans without fluence field modulation were acquired at "full" and 30% dose. The noise (pixel standard deviation) was measured inside the VOI region and compared between the three scans. Results: The VOI-FFMCT technique produced an image noise 1.09, 1.05, 1.05, and 1.21 times higher than the "full dose" scan for ROI sizes of 10 cm, 13 cm, 10 cm, and 6 cm respectively within the VOI region. Conclusions: Noise levels can be almost unchanged within clinically relevant VOIs sizes for RT applications while the integral imaging dose to the patient can be decreased, and/or the image quality in RT can be dramatically increased with no change in dose relative to non-FFMCT RT imaging. The ability to shift dose away from regions unimportant for clinical evaluation in order to improve image quality or reduce imaging dose has been demonstrated. This paper demonstrates that FFMCT can be performed using the MLC on a clinical TomoTherapy machine for the first time.

Use of PROMIS for Patients Undergoing Primary Total Shoulder Arthroplasty.

PubMed

Dowdle, S Blake; Glass, Natalie; Anthony, Chris A; Hettrich, Carolyn M

2017-09-01

The Patient-Reported Outcomes Measurement Information System (PROMIS) consists of question banks for health domains through computer adaptive testing (CAT). For patients with glenohumeral arthritis, (1) there would be high correlation between traditional patient-reported outcome (PRO) measures and the PROMIS upper extremity item bank (PROMIS UE) and PROMIS physical function CAT (PROMIS PF CAT), and (2) PROMIS PF CAT would not demonstrate ceiling effects. Cohort study (diagnosis); Level of evidence, 3. Sixty-one patients with glenohumeral osteoarthritis were included. Each patient completed the American Shoulder and Elbow Surgeons (ASES) assessment form, Marx Shoulder Activity Scale, Short Form-36 physical function scale (SF-36 PF), EuroQol 5 Dimensions (EQ-5D) questionnaire, Western Ontario Osteoarthritis Shoulder (WOOS) index, PROMIS PF CAT, and the PROMIS UE. Correlation was defined as high (>0.7), moderate (0.4-0.6), or weak (0.2-0.3). Significant floor and ceiling effects were present if more than 15% of individuals scored the lowest or highest possible total score on any PRO. The PROMIS PF demonstrated excellent correlation with the SF-36 PF ( r = 0.81, P < .0001) and good correlation with the ASES ( r = 0.62, P < .0001), EQ-5D ( r = 0.64, P < .001), and WOOS index ( r = 0.51, P < .01). The PROMIS PF demonstrated low correlation with the Marx scale ( r = 0.29, P = .02). The PROMIS UE demonstrated good correlation with the ASES ( r = 0.55, P < .0001), SF-36 ( r = 0.53, P < .01), EQ-5D ( r = 0.48, P < .01), and WOOS ( r = 0.34, P <.01), and poor correlation with the Marx scale ( r = 0.06, P = .62). There were no ceiling or floor effects observed. The mean number of items administered by the PROMIS PRO was 4. These data suggest that for a patient population with operative shoulder osteoarthritis, PROMIS UE and PROMIS PF CAT may be valid alternative PROs. Additionally, PROMIS PF CAT offers a decreased question burden with no ceiling effects.

Anechoic chamber in industrial plants. [construction materials and structural design

NASA Technical Reports Server (NTRS)

Halpert, E.; Juncu, O.; Lorian, R.; Marfievici, D.; Mararu, I.

1974-01-01

A light anechoic chamber for routine acoustical measurements in the machine building industry is reported. The outer housing of the chamber consists of modules cast in glass fiber reinforced polyester resin; the inner housing consists of pyramidal modules cut out of sound absorbing slates. The parameters of this anechoic chamber facilitate acoustical measurements according to ISO and CAEM recommendations.

Modularity in robotic systems

NASA Technical Reports Server (NTRS)

Tesar, Delbert; Butler, Michael S.

1989-01-01

Most robotic systems today are designed one at a time, at a high cost of time and money. This wasteful approach has been necessary because the industry has not established a foundation for the continued evolution of intelligent machines. The next generation of robots will have to be generic, versatile machines capable of absorbing new technology rapidly and economically. This approach is demonstrated in the success of the personal computer, which can be upgraded or expanded with new software and hardware at virtually every level. Modularity is perceived as a major opportunity to reduce the 6 to 7 year design cycle time now required for new robotic manipulators, greatly increasing the breadth and speed of diffusion of robotic systems in manufacturing. Modularity and its crucial role in the next generation of intelligent machines are the focus of interest. The main advantages that modularity provides are examined; types of modules needed to create a generic robot are discussed. Structural modules designed by the robotics group at the University of Texas at Austin are examined to demonstrate the advantages of modular design.

Reservoir computing with a slowly modulated mask signal for preprocessing using a mutually coupled optoelectronic system

NASA Astrophysics Data System (ADS)

Tezuka, Miwa; Kanno, Kazutaka; Bunsen, Masatoshi

2016-08-01

Reservoir computing is a machine-learning paradigm based on information processing in the human brain. We numerically demonstrate reservoir computing with a slowly modulated mask signal for preprocessing by using a mutually coupled optoelectronic system. The performance of our system is quantitatively evaluated by a chaotic time series prediction task. Our system can produce comparable performance with reservoir computing with a single feedback system and a fast modulated mask signal. We showed that it is possible to slow down the modulation speed of the mask signal by using the mutually coupled system in reservoir computing.

A comparative study of machine learning models for ethnicity classification

NASA Astrophysics Data System (ADS)

Trivedi, Advait; Bessie Amali, D. Geraldine

2017-11-01

This paper endeavours to adopt a machine learning approach to solve the problem of ethnicity recognition. Ethnicity identification is an important vision problem with its use cases being extended to various domains. Despite the multitude of complexity involved, ethnicity identification comes naturally to humans. This meta information can be leveraged to make several decisions, be it in target marketing or security. With the recent development of intelligent systems a sub module to efficiently capture ethnicity would be useful in several use cases. Several attempts to identify an ideal learning model to represent a multi-ethnic dataset have been recorded. A comparative study of classifiers such as support vector machines, logistic regression has been documented. Experimental results indicate that the logical classifier provides a much accurate classification than the support vector machine.

Robots Make Intelligent Teachers

ERIC Educational Resources Information Center

Trotter, Robert J.

1973-01-01

Discussion of the use of teaching machines to help a child learn the basics of geometry. Fully developed educational modules for such subjects as physics, biology, physiology and linguistics are forth-coming. (EB)

Toward a Normative Theory of Freedom of the Press.

ERIC Educational Resources Information Center

Jensen, Dwight Wm.

In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

Complex Langevin simulation of chiral symmetry restoration at finite baryonic density

NASA Astrophysics Data System (ADS)

Ilgenfritz, Ernst-Michael

1986-12-01

A recently proposed effective SU(3) spin model with chiral order parameter is studied by means of the complex Langevin equation. A first-order chiral symmetry restoring and deconfining transition is observed at sufficiently low temperature at finite baryonic density. Permanent address: Sektion Physik, Karl-Marx Universität, DDR-7010 Leipzig, German Democratic Republic.

The Latest Developments in the Field of University Teaching Methods: A View from the German Democratic Republic.

ERIC Educational Resources Information Center

Klose-Berger, Annelore; Mohle, Horst

1989-01-01

Several aspects of East German research on university teaching methods, with special reference to Karl Marx University, are discussed: the development of teaching methods as part of the educational sciences field; selected recent research results, and the application of research findings to practice in the training and retraining of university…

Educating from Marx: Race, Gender, and Learning. Marxism and Education

ERIC Educational Resources Information Center

Mojab, Shahrzad; Carpenter, Sara

2011-01-01

In recent years adult educators have been working to develop an important body of literature on neo-liberalism, capitalism, and imperialism. Many of these analyses draw on various strands of Marxist theorizing. With the exception of Jane Thompson's work as an early socialist feminist, a Marxist-Feminist framework has yet to be articulated for…

Challenges and Opportunities: Using a Science-Based Video Game in Secondary School Settings

ERIC Educational Resources Information Center

Muehrer, Rachel; Jenson, Jennifer; Friedberg, Jeremy; Husain, Nicole

2012-01-01

Simulations and games are not new artifacts to the study of science in secondary school settings (Hug, Kriajcik and Marx 2005), however teachers remain skeptical as to their value, use and appropriateness (Rice 2006). The difficulty is not only the design and development of effective play environments that produce measurable changes in knowledge…

EC 92: Implications for United States Trade Policy

DTIC Science & Technology

1990-04-09

38. 8. Veronique Maurus, "Le Maroc : le Nouveau Dragon aux Portes d’Europe," Le Monde (Paris), 03 November 1989, p. 9. 9. Carl Hamilton...Marx, Bernard. "What 1992 Has in Store for Europe." World Marxist Review, Vol. 32, January 1989, pp. 78-82. 33. Maurus, Veronique. "Le Maroc : le Nouveau

Education and the Reconstitution of Social Class in England

ERIC Educational Resources Information Center

Ainley, Patrick

2013-01-01

This paper extends the work of Gamble, who followed Marx in seeing a reconstitution of the reserve army of labour as a key function of capitalist crisis, but it suggests a wider class reformation that includes what can be called the middle-working/working-middle class. Education and training to all levels are deeply implicated in this class…

Karl Marx and the Paris Commune of 1871: Tracing Traditions of Critical Pedagogy

ERIC Educational Resources Information Center

McGray, Robert

2014-01-01

In 1871, citizens of the war torn arrondissements of Paris, in the face of traumatic political and military turmoil, established a new local form of government. The Paris Commune, as this government became known as in the English world, attracted attention for its alternative political-economic organization. One notable commentator was Karl Marx…

Education, Schooling, Derrida's Marx and Democracy: Some Fundamental Questions

ERIC Educational Resources Information Center

Peim, Nick

2013-01-01

Beginning with a reconsideration of what the school is and has been, this paper explores the idea of the school to come. Emphasizing the governmental role of education in modernity, I offer a line of thinking that calls into question the assumption of both the school and education as possible conduits for either democracy or social justice.…

Self-Actualization and E-Learning: A Qualitative Investigation of University Faculty's Perceived Barriers to Effective Online Instruction

ERIC Educational Resources Information Center

Oomen-Early, Jody; Murphy, Lynda

2009-01-01

Much has been written about why university faculty choose to refrain or participate in online instruction (Beaudoin, 1990; Bower, 2001; Clark, 1993; Dillon & Walsh, 1992; McKenzie, 2000; McKinnon, 1998; Paulson, 2002; Rockwell, Scheuer, Fritz, & Marx, 1999; Schifter, 2002; Wilson, 1998). Missing from the empirical knowledge base, however, are…

Socrates and Technology a New Millennium Conversation

ERIC Educational Resources Information Center

Howard, W. Gary

2006-01-01

The Socratic Method has impacted thinkers and instructors from Hegel, who moved through the negation to the negation of the negation, to Marx, who viewed history through dialectical materialism, to C.C. Langdell, who introduced case law as an innovative method to study law as a science, to present-day professors who use this method to compel…

1. AERIAL VIEW, LOOKING SOUTH, ALONG 20TH STREET NORTH WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. AERIAL VIEW, LOOKING SOUTH, ALONG 20TH STREET NORTH WITH EMPIRE BUILDING (CENTER RIGHT), WOODWARD BUILDING (CENTER), JOHN HAND BUILDING (TOP LEFT), BROWN MARX BUILDING (BOTTOM LEFT), THE FOUR BUILDINGS THAT COMPRISE THIS NATIONAL REGISTER HISTORIC DISTRICT - Heaviest Corner on Earth (Commercial), First Avenue, North & Twentieth (20th) Street, North, Birmingham, Jefferson County, AL

Discourse, Complexity, Normativity: Tracing the Elaboration of Foucault's Materialist Concept of Discourse

ERIC Educational Resources Information Center

Olssen, Mark

2014-01-01

In this article, I want to suggest that it is through the elaboration of the concept of discourse that the differences between Foucault and thinkers like Habermas, Hegel and Marx can best be understood. Foucault progressively develops a conception of discourse as a purely historical category that resists all reference to transcendental principles…

Collaborative Professional Development and Curriculum Enactment: Teacher Reflection to Inform Inquiry-Based Discussions in High School Science Classrooms

ERIC Educational Resources Information Center

Alozie, Nonyelum M.

2010-01-01

Professional development for practicing science teachers has been a goal in education for the last two decades. Studies have shown that the quality of teacher instruction may be linked to teacher participation and involvement in professional development programs (Fishman, Marx, Best, & Tal, 2003). Furthermore, reflection during professional…

What Are the Costs of Degraded Parafoveal Previews during Silent Reading?

ERIC Educational Resources Information Center

Vasilev, Martin R.; Slattery, Timothy J.; Kirkby, Julie A.; Angele, Bernhard

2018-01-01

It has been suggested that the preview benefit effect is actually a combination of preview benefit and preview costs. Marx et al. (2015) proposed that visually degrading the parafoveal preview reduces the costs associated with traditional parafoveal letter masks used in the boundary paradigm (Rayner, 1975), thus leading to a more neutral baseline.…

Tree decay an expanded concept

Treesearch

Alex L. Shigo

1979-01-01

This publication is the final one in a series on tree decay developed in cooperation with Harold G. Marx, Research Application Staff Assistant, U.S. Department of Agriculture, Forest Service, Washington, D.C. The purpose of this publication is to clarify further the tree decay concept that expands the classical concept to include the orderly response of the tree to...

Engaging in Science: A Feeling for the Discipline

ERIC Educational Resources Information Center

Jaber, Lama Z.; Hammer, David

2016-01-01

Most accounts of affect and motivation in the science education literature have discussed them as relevant to, but distinct from, disciplinary pursuits. These include Pintrich's seminal work on affective and motivational factors in learning science (P. R. Pintrich, 1999, 2003; P. R. Pintrich & E. De Groot, 1990; P. R. Pintrich, R. W. Marx,…

Honeycomb Betavoltaic Battery for Space Applications

NASA Astrophysics Data System (ADS)

Lee, Jin R.; Ulmen, Ben; Miley, George H.

2008-01-01

Radioisotopic batteries offer advantages relative to conventional chemical batteries for applications requiring a long lifetime with minimum maintenance. Thus, thermoelectric type cells fueled with Pu have been used extensively on NASA space missions. The design for a small beta battery using nickel-63 (Ni-63) and a vacuum direct collection method is described here. A honeycomb nickel wire structure is employed to achieve bi-directional direct collection by seeding Ni-63 onto honeycomb shaped wires that will provide structural support as well. The battery design is intended to power low power electronics and distribute power needs in space probes as well as space colonies. Ni-63 is chosen as the source emitter because it has a long half-life and ease of manufacturing. The use of vacuum is especially well mated to space use; hence, vacuum insulation is employed to gain a higher efficiency than prior beta batteries with a dielectric insulator. A unique voltage down-converter is incorporated to efficiently reduce the inherent output voltage from 17.4 kV to ~17.4 V. This converter operates like a ``reverse'' Marx circuit where capacitor charging occurs in series but the discharge is in parallel. The reference battery module described here is about 100 cm×100 cm×218 cm and has a power of ~10 W with a conversion efficiency of ~15.8%. These modules can be stacked for higher powers and are very attractive for various applications in space colonization due to their long life (half-life for Ni-63~100 yrs) and low maintenance.

Comparison of ultrasonic energy expenditures and corneal endothelial cell density reductions during modulated and non-modulated phacoemulsification.

PubMed

Davison, James A

2007-01-01

To compare the Legacy 20000 Advantec continuous and Infiniti hyperpulse modes (Alcon Laboratories, Fort Worth, TX) with respect to average power, machine-measured phacoemulsification time, total stopwatch real time spent within the phacoemulsification process, balanced salt solution (BSS) volume, and corneal endothelial cell density losses. A background study was done of consecutive patients operated on with the Legacy (n = 60) and Infiniti (n = 40) machines programmed with identical parameters and using the continuous mode only. A primary study of another set of consecutive cases was operated on using the Legacy (n = 87) and Infiniti (n = 94) with the same parameters, but using the hyperpulse mode during quadrant removal with the Infiniti. Measurements for each set included average power and phacoemulsification time with corneal endothelial cell densities, BSS volume, and time spent in the phacoemulsification process. Similarities were found in the background study for average power percent and average minutes of phacoemulsification time. In the primary study, similarities were found for total minutes in the phacoemulsification process, BSS usage, and ECD losses, and differences were found for average power percent (P< .001) and machine-measured phacoemulsification minutes (P< .001). The Legacy and Infiniti performed similarly in continuous mode. With the Infiniti hyperpulse mode, a total ultrasonic energy reduction of 66% was noted. The machines required the same amount of total stopwatch measured time to accomplish phacoemulsification and produced the same 5% corneal endothelial cell loss. Therefore, clinically, these two machines behave in a comparable manner relative to safety and effectiveness.

A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Subsequent to the design review, a series of tests was conducted on simulated modules to demonstrate that all environmental specifications (wind loading, hailstone impact, thermal cycling, and humidity cycling) are satisfied by the design. All tests, except hailstone impact, were successfully completed. The assembly sequence was simplified by virtue of eliminating the frame components and assembly steps. Performance was improved by reducing the module edge border required to accommodate the frame of the preliminary design module. An ultrasonic rolling spot bonding technique was selected for use in the machine to perform the aluminum interconnect to cell metallization electrical joints required in the MEPSDU module configuration. This selection was based on extensive experimental tests and economic analyses.

miREE: miRNA recognition elements ensemble

PubMed Central

2011-01-01

Background Computational methods for microRNA target prediction are a fundamental step to understand the miRNA role in gene regulation, a key process in molecular biology. In this paper we present miREE, a novel microRNA target prediction tool. miREE is an ensemble of two parts entailing complementary but integrated roles in the prediction. The Ab-Initio module leverages upon a genetic algorithmic approach to generate a set of candidate sites on the basis of their microRNA-mRNA duplex stability properties. Then, a Support Vector Machine (SVM) learning module evaluates the impact of microRNA recognition elements on the target gene. As a result the prediction takes into account information regarding both miRNA-target structural stability and accessibility. Results The proposed method significantly improves the state-of-the-art prediction tools in terms of accuracy with a better balance between specificity and sensitivity, as demonstrated by the experiments conducted on several large datasets across different species. miREE achieves this result by tackling two of the main challenges of current prediction tools: (1) The reduced number of false positives for the Ab-Initio part thanks to the integration of a machine learning module (2) the specificity of the machine learning part, obtained through an innovative technique for rich and representative negative records generation. The validation was conducted on experimental datasets where the miRNA:mRNA interactions had been obtained through (1) direct validation where even the binding site is provided, or through (2) indirect validation, based on gene expression variations obtained from high-throughput experiments where the specific interaction is not validated in detail and consequently the specific binding site is not provided. Conclusions The coupling of two parts: a sensitive Ab-Initio module and a selective machine learning part capable of recognizing the false positives, leads to an improved balance between sensitivity and specificity. miREE obtains a reasonable trade-off between filtering false positives and identifying targets. miREE tool is available online at http://didattica-online.polito.it/eda/miREE/ PMID:22115078

Impact of Spot Size and Spacing on the Quality of Robustly Optimized Intensity Modulated Proton Therapy Plans for Lung Cancer.

PubMed

Liu, Chenbin; Schild, Steven E; Chang, Joe Y; Liao, Zhongxing; Korte, Shawn; Shen, Jiajian; Ding, Xiaoning; Hu, Yanle; Kang, Yixiu; Keole, Sameer R; Sio, Terence T; Wong, William W; Sahoo, Narayan; Bues, Martin; Liu, Wei

2018-06-01

To investigate how spot size and spacing affect plan quality, robustness, and interplay effects of robustly optimized intensity modulated proton therapy (IMPT) for lung cancer. Two robustly optimized IMPT plans were created for 10 lung cancer patients: first by a large-spot machine with in-air energy-dependent large spot size at isocenter (σ: 6-15 mm) and spacing (1.3 σ), and second by a small-spot machine with in-air energy-dependent small spot size (σ: 2-6 mm) and spacing (5 mm). Both plans were generated by optimizing radiation dose to internal target volume on averaged 4-dimensional computed tomography scans using an in-house-developed IMPT planning system. The dose-volume histograms band method was used to evaluate plan robustness. Dose evaluation software was developed to model time-dependent spot delivery to incorporate interplay effects with randomized starting phases for each field per fraction. Patient anatomy voxels were mapped phase-to-phase via deformable image registration, and doses were scored using in-house-developed software. Dose-volume histogram indices, including internal target volume dose coverage, homogeneity, and organs at risk (OARs) sparing, were compared using the Wilcoxon signed-rank test. Compared with the large-spot machine, the small-spot machine resulted in significantly lower heart and esophagus mean doses, with comparable target dose coverage, homogeneity, and protection of other OARs. Plan robustness was comparable for targets and most OARs. With interplay effects considered, significantly lower heart and esophagus mean doses with comparable target dose coverage and homogeneity were observed using smaller spots. Robust optimization with a small spot-machine significantly improves heart and esophagus sparing, with comparable plan robustness and interplay effects compared with robust optimization with a large-spot machine. A small-spot machine uses a larger number of spots to cover the same tumors compared with a large-spot machine, which gives the planning system more freedom to compensate for the higher sensitivity to uncertainties and interplay effects for lung cancer treatments. Copyright © 2018 Elsevier Inc. All rights reserved.

Program Helps Decompose Complex Design Systems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Hall, Laura E.

1994-01-01

DeMAID (A Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Groups modular subsystems on basis of interactions among them. Saves considerable money and time in total design process, particularly in new design problem in which order of modules has not been defined. Available in two machine versions: Macintosh and Sun.

Aberrant functional connectivity for diagnosis of major depressive disorder: a discriminant analysis.

PubMed

Cao, Longlong; Guo, Shuixia; Xue, Zhimin; Hu, Yong; Liu, Haihong; Mwansisya, Tumbwene E; Pu, Weidan; Yang, Bo; Liu, Chang; Feng, Jianfeng; Chen, Eric Y H; Liu, Zhening

2014-02-01

Aberrant brain functional connectivity patterns have been reported in major depressive disorder (MDD). It is unknown whether they can be used in discriminant analysis for diagnosis of MDD. In the present study we examined the efficiency of discriminant analysis of MDD by individualized computer-assisted diagnosis. Based on resting-state functional magnetic resonance imaging data, a new approach was adopted to investigate functional connectivity changes in 39 MDD patients and 37 well-matched healthy controls. By using the proposed feature selection method, we identified significant altered functional connections in patients. They were subsequently applied to our analysis as discriminant features using a support vector machine classification method. Furthermore, the relative contribution of functional connectivity was estimated. After subset selection of high-dimension features, the support vector machine classifier reached up to approximately 84% with leave-one-out training during the discrimination process. Through summarizing the classification contribution of functional connectivities, we obtained four obvious contribution modules: inferior orbitofrontal module, supramarginal gyrus module, inferior parietal lobule-posterior cingulated gyrus module and middle temporal gyrus-inferior temporal gyrus module. The experimental results demonstrated that the proposed method is effective in discriminating MDD patients from healthy controls. Functional connectivities might be useful as new biomarkers to assist clinicians in computer auxiliary diagnosis of MDD. © 2013 The Authors. Psychiatry and Clinical Neurosciences © 2013 Japanese Society of Psychiatry and Neurology.

Sensor fusion II: Human and machine strategies; Proceedings of the Meeting, Philadelphia, PA, Nov. 6-9, 1989

NASA Technical Reports Server (NTRS)

Schenker, Paul S. (Editor)

1990-01-01

Various papers on human and machine strategies in sensor fusion are presented. The general topics addressed include: active vision, measurement and analysis of visual motion, decision models for sensor fusion, implementation of sensor fusion algorithms, applying sensor fusion to image analysis, perceptual modules and their fusion, perceptual organization and object recognition, planning and the integration of high-level knowledge with perception, using prior knowledge and context in sensor fusion.

An Attachable Electromagnetic Energy Harvester Driven Wireless Sensing System Demonstrating Milling-Processes and Cutter-Wear/Breakage-Condition Monitoring.

PubMed

Chung, Tien-Kan; Yeh, Po-Chen; Lee, Hao; Lin, Cheng-Mao; Tseng, Chia-Yung; Lo, Wen-Tuan; Wang, Chieh-Min; Wang, Wen-Chin; Tu, Chi-Jen; Tasi, Pei-Yuan; Chang, Jui-Wen

2016-02-23

An attachable electromagnetic-energy-harvester driven wireless vibration-sensing system for monitoring milling-processes and cutter-wear/breakage-conditions is demonstrated. The system includes an electromagnetic energy harvester, three single-axis Micro Electro-Mechanical Systems (MEMS) accelerometers, a wireless chip module, and corresponding circuits. The harvester consisting of magnets with a coil uses electromagnetic induction to harness mechanical energy produced by the rotating spindle in milling processes and consequently convert the harnessed energy to electrical output. The electrical output is rectified by the rectification circuit to power the accelerometers and wireless chip module. The harvester, circuits, accelerometer, and wireless chip are integrated as an energy-harvester driven wireless vibration-sensing system. Therefore, this completes a self-powered wireless vibration sensing system. For system testing, a numerical-controlled machining tool with various milling processes is used. According to the test results, the system is fully self-powered and able to successfully sense vibration in the milling processes. Furthermore, by analyzing the vibration signals (i.e., through analyzing the electrical outputs of the accelerometers), criteria are successfully established for the system for real-time accurate simulations of the milling-processes and cutter-conditions (such as cutter-wear conditions and cutter-breaking occurrence). Due to these results, our approach can be applied to most milling and other machining machines in factories to realize more smart machining technologies.

An Attachable Electromagnetic Energy Harvester Driven Wireless Sensing System Demonstrating Milling-Processes and Cutter-Wear/Breakage-Condition Monitoring

PubMed Central

Chung, Tien-Kan; Yeh, Po-Chen; Lee, Hao; Lin, Cheng-Mao; Tseng, Chia-Yung; Lo, Wen-Tuan; Wang, Chieh-Min; Wang, Wen-Chin; Tu, Chi-Jen; Tasi, Pei-Yuan; Chang, Jui-Wen

2016-01-01

An attachable electromagnetic-energy-harvester driven wireless vibration-sensing system for monitoring milling-processes and cutter-wear/breakage-conditions is demonstrated. The system includes an electromagnetic energy harvester, three single-axis Micro Electro-Mechanical Systems (MEMS) accelerometers, a wireless chip module, and corresponding circuits. The harvester consisting of magnets with a coil uses electromagnetic induction to harness mechanical energy produced by the rotating spindle in milling processes and consequently convert the harnessed energy to electrical output. The electrical output is rectified by the rectification circuit to power the accelerometers and wireless chip module. The harvester, circuits, accelerometer, and wireless chip are integrated as an energy-harvester driven wireless vibration-sensing system. Therefore, this completes a self-powered wireless vibration sensing system. For system testing, a numerical-controlled machining tool with various milling processes is used. According to the test results, the system is fully self-powered and able to successfully sense vibration in the milling processes. Furthermore, by analyzing the vibration signals (i.e., through analyzing the electrical outputs of the accelerometers), criteria are successfully established for the system for real-time accurate simulations of the milling-processes and cutter-conditions (such as cutter-wear conditions and cutter-breaking occurrence). Due to these results, our approach can be applied to most milling and other machining machines in factories to realize more smart machining technologies. PMID:26907297

Software architecture for time-constrained machine vision applications

NASA Astrophysics Data System (ADS)

Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.

2013-01-01

Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility, because they are normally oriented toward particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse, and inefficient execution on multicore processors. We present a novel software architecture for time-constrained machine vision applications that addresses these issues. The architecture is divided into three layers. The platform abstraction layer provides a high-level application programming interface for the rest of the architecture. The messaging layer provides a message-passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of message. The application layer provides a repository for reusable application modules designed for machine vision applications. These modules, which include acquisition, visualization, communication, user interface, and data processing, take advantage of the power of well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, the proposed architecture is applied to a real machine vision application: a jam detector for steel pickling lines.

Three-dimensional analysis of tubular permanent magnet machines

NASA Astrophysics Data System (ADS)

Chai, J.; Wang, J.; Howe, D.

2006-04-01

This paper presents results from a three-dimensional finite element analysis of a tubular permanent magnet machine, and quantifies the influence of the laminated modules from which the stator core is assembled on the flux linkage and thrust force capability as well as on the self- and mutual inductances. The three-dimensional finite element (FE) model accounts for the nonlinear, anisotropic magnetization characteristic of the laminated stator structure, and for the voids which exist between the laminated modules. Predicted results are compared with those deduced from an axisymmetric FE model. It is shown that the emf and thrust force deduced from the three-dimensional model are significantly lower than those which are predicted from an axisymmetric field analysis, primarily as a consequence of the teeth and yoke being more highly saturated due to the presence of the voids in the laminated stator core.

Packaging of a large capacity magnetic bubble domain spacecraft recorder

NASA Technical Reports Server (NTRS)

Becker, F. J.; Stermer, R. L.

1977-01-01

A Solid State Spacecraft Data Recorder (SSDR), based on bubble domain technology, having a storage capacity of 10 to the 8th power bits, was designed and is being tested. The recorder consists of two memory modules each having 32 cells, each cell containing sixteen 100 kilobit serial bubble memory chips. The memory modules are interconnected to a Drive and Control Unit (DCU) module containing four microprocessors, 500 integrated circuits, a RAM core memory and two PROM's. The two memory modules and DCU are housed in individual machined aluminum frames, are stacked in brick fashion and through bolted to a base plate assembly which also houses the power supply.

Correlation between use time of machine and decline curve for emerging enterprise information systems

NASA Astrophysics Data System (ADS)

Chang, Yao-Chung; Lai, Chin-Feng; Chuang, Chi-Cheng; Hou, Cheng-Yu

2018-04-01

With the progress of science and technology, more and more machines are adpot to help human life better and more convenient. When the machines have been used for a longer period of time so that the machine components are getting old, the amount of power comsumption will increase and easily cause the machine to overheat. This also causes a waste of invisible resources. If the Internet of Everything (IoE) technologies are able to be applied into the enterprise information systems for monitoring the machines use time, it can not only make energy can be effectively used, but aslo create a safer living environment. To solve the above problem, the correlation predict model is established to collect the data of power consumption converted into power eigenvalues. This study takes the power eigenvalue as the independent variable and use time as the dependent variable in order to establish the decline curve. Ultimately, the scoring and estimation modules are employed to seek the best power eigenvalue as the independent variable. To predict use time, the correlation is discussed between the use time and the decline curve to improve the entire behavioural analysis of the facilitate recognition of the use time of machines.

Oracle Applications Patch Administration Tool (PAT) Beta Version

DOE Office of Scientific and Technical Information (OSTI.GOV)

2002-01-04

PAT is a Patch Administration Tool that provides analysis, tracking, and management of Oracle Application patches. This includes capabilities as outlined below: Patch Analysis & Management Tool Outline of capabilities: Administration Patch Data Maintenance -- track Oracle Application patches applied to what database instance & machine Patch Analysis capture text files (readme.txt and driver files) form comparison detail report comparison detail PL/SQL package comparison detail SQL scripts detail JSP module comparison detail Parse and load the current applptch.txt (10.7) or load patch data from Oracle Application database patch tables (11i) Display Analysis -- Compare patch to be applied with currentmore » Oracle Application installed Appl_top code versions Patch Detail Module comparison detail Analyze and display one Oracle Application module patch. Patch Management -- automatic queue and execution of patches Administration Parameter maintenance -- setting for directory structure of Oracle Application appl_top Validation data maintenance -- machine names and instances to patch Operation Patch Data Maintenance Schedule a patch (queue for later execution) Run a patch (queue for immediate execution) Review the patch logs Patch Management Reports« less

Single-Molecule Real-Time 3D Imaging of the Transcription Cycle by Modulation Interferometry.

PubMed

Wang, Guanshi; Hauver, Jesse; Thomas, Zachary; Darst, Seth A; Pertsinidis, Alexandros

2016-12-15

Many essential cellular processes, such as gene control, employ elaborate mechanisms involving the coordination of large, multi-component molecular assemblies. Few structural biology tools presently have the combined spatial-temporal resolution and molecular specificity required to capture the movement, conformational changes, and subunit association-dissociation kinetics, three fundamental elements of how such intricate molecular machines work. Here, we report a 3D single-molecule super-resolution imaging study using modulation interferometry and phase-sensitive detection that achieves <2 nm axial localization precision, well below the few-nanometer-sized individual protein components. To illustrate the capability of this technique in probing the dynamics of complex macromolecular machines, we visualize the movement of individual multi-subunit E. coli RNA polymerases through the complete transcription cycle, dissect the kinetics of the initiation-elongation transition, and determine the fate of σ 70 initiation factors during promoter escape. Modulation interferometry sets the stage for single-molecule studies of several hitherto difficult-to-investigate multi-molecular transactions that underlie genome regulation. Copyright © 2016 Elsevier Inc. All rights reserved.

Method and infrastructure for cycle-reproducible simulation on large scale digital circuits on a coordinated set of field-programmable gate arrays (FPGAs)

DOEpatents

Asaad, Sameh W; Bellofatto, Ralph E; Brezzo, Bernard; Haymes, Charles L; Kapur, Mohit; Parker, Benjamin D; Roewer, Thomas; Tierno, Jose A

2014-01-28

A plurality of target field programmable gate arrays are interconnected in accordance with a connection topology and map portions of a target system. A control module is coupled to the plurality of target field programmable gate arrays. A balanced clock distribution network is configured to distribute a reference clock signal, and a balanced reset distribution network is coupled to the control module and configured to distribute a reset signal to the plurality of target field programmable gate arrays. The control module and the balanced reset distribution network are cooperatively configured to initiate and control a simulation of the target system with the plurality of target field programmable gate arrays. A plurality of local clock control state machines reside in the target field programmable gate arrays. The local clock state machines are configured to generate a set of synchronized free-running and stoppable clocks to maintain cycle-accurate and cycle-reproducible execution of the simulation of the target system. A method is also provided.

High-Trust Leadership and Blended Learning in the Age of Disruptive Innovation: Strategic Thinking for Colleges and Schools of Education

ERIC Educational Resources Information Center

Holland, Denise D.; Piper, Randy T.

2016-01-01

We introduce diverse definitions of leadership and its evolutionary history and then we integrate this idea network: strategic thinking, high-trust leadership, blended learning, and disruptive innovation. Following the lead of Marx's (2014) model of Teaching Leadership and Strategy and Rehm's (2014) model of High School Student Leadership…

Yes!: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Rousseau, Denise M.

2016-01-01

In this rejoinder to, "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?" (Marx, Garcia, Butterfield, Kappen, and Baldwin 2015), the author responds in agreement to the question raised regarding the lack of teaching preparation in business schools. This commentary offers suggestions to…

China Report, Red Flag, Number 13, 1 July 1982

DTIC Science & Technology

1982-08-16

used this concept in his essay "Karl Marx." He pointed out that ’Marxism "disclosed that all ideas and all the various tendencies, without exception...fields, there are plenty of academic conferences and periodicals, but the quality of some of the essays is very poor, and some studies and some...with lyrics by Zhang Shoushan [1728 1108 1472

Mark Twain: A Collection of Critical Essays. Twentieth Century Views Series.

ERIC Educational Resources Information Center

Smith, Henry Nash, Ed.

One of a series of works aimed at presenting contemporary critical opinion on major authors, this collection includes essays by Henry Nash Smith, Van Wyck Brooks, Maurice Le Breton, Kenneth Lynn, Leo Marx, Walter Blair, Daniel G. Hoffman, W. H. Auden, James M. Cox, Leslie Fiedler, Bernard DeVoto, and Tony Tanner--all dealing with the biography and…

Critical Pedagogy and the Decolonial Option: Challenges to the Inevitability of Capitalism

ERIC Educational Resources Information Center

Monzó, Lilia D.; McLaren, Peter

2014-01-01

The demise of capitalism was theoretically prophesied by Marx who posited that the world would come to such a state of destruction and human suffering that no amount of coercion or concessions would suffice to stop the massive uprisings that would lead us into a new socialist alternative. Although the downfall of world capitalism may seem…

The Productivity of Students' Schoolwork: An Exercise in Marxist Rigour

ERIC Educational Resources Information Center

Baldino, Roberto Ribeiro; Cabral, Tânia Cristina Baptista

2013-01-01

In this article we will use central elements in Mature Marx's theory of productive labour to prove that not only the work of teachers and staff but also the expenditure of students' muscles and nerves is productive labour. This theme has some intersection with the work of housewives that autonomist Marxism asserts to be productive labour…

Marxist Thought: Still Primus Inter Pares for Understanding and Opposing the Capitalist System

ERIC Educational Resources Information Center

Brosio, Richard A.

2008-01-01

In this article, the author attempts to examine Marx's humanist commitment, and with it a belief in human volition--or agency (Brosio 1985, passim). Collective agency is necessary for attempts to rescue society and its schools from the latest, namely neo-liberal, capitalist attack on working people and the possibilities for the achieving deep and…

Coming to Critical Pedagogy: A Marxist Autobiography in the History of Higher Education

ERIC Educational Resources Information Center

Malott, Curry Stephenson

2014-01-01

In this essay Malott traces his journey to critical pedagogy focusing on a significant element of his family's ethnic and class background and its connection to his own educational experiences from public schooling to university. Drawing on Marx's historical discussions at the end of Volume 1 of "Capital" Malott traces his own…

Toward a Broader Dialectic: Joining Marxism with Mailer to Forge a Multilectics That Advances Teaching and Learning

ERIC Educational Resources Information Center

Fellner, Gene

2014-01-01

I contrast the lenses that Norman Mailer, Herbert Marcuse, and Karl Marx bring to their analyses of social life, exploring the contributions and limits of their respective approaches. I then propose what I call a "multilectical" theoretical lens that encompasses the strengths of all three and leans on the insights of post-Marxist…

A self-defining hierarchical data system

NASA Technical Reports Server (NTRS)

Bailey, J.

1992-01-01

The Self-Defining Data System (SDS) is a system which allows the creation of self-defining hierarchical data structures in a form which allows the data to be moved between different machine architectures. Because the structures are self-defining they can be used for communication between independent modules in a distributed system. Unlike disk-based hierarchical data systems such as Starlink's HDS, SDS works entirely in memory and is very fast. Data structures are created and manipulated as internal dynamic structures in memory managed by SDS itself. A structure may then be exported into a caller supplied memory buffer in a defined external format. This structure can be written as a file or sent as a message to another machine. It remains static in structure until it is reimported into SDS. SDS is written in portable C and has been run on a number of different machine architectures. Structures are portable between machines with SDS looking after conversion of byte order, floating point format, and alignment. A Fortran callable version is also available for some machines.

AstroML: Python-powered Machine Learning for Astronomy

NASA Astrophysics Data System (ADS)

Vander Plas, Jake; Connolly, A. J.; Ivezic, Z.

2014-01-01

As astronomical data sets grow in size and complexity, automated machine learning and data mining methods are becoming an increasingly fundamental component of research in the field. The astroML project (http://astroML.org) provides a common repository for practical examples of the data mining and machine learning tools used and developed by astronomical researchers, written in Python. The astroML module contains a host of general-purpose data analysis and machine learning routines, loaders for openly-available astronomical datasets, and fast implementations of specific computational methods often used in astronomy and astrophysics. The associated website features hundreds of examples of these routines being used for analysis of real astronomical datasets, while the associated textbook provides a curriculum resource for graduate-level courses focusing on practical statistics, machine learning, and data mining approaches within Astronomical research. This poster will highlight several of the more powerful and unique examples of analysis performed with astroML, all of which can be reproduced in their entirety on any computer with the proper packages installed.

Optimal feedback control successfully explains changes in neural modulations during experiments with brain-machine interfaces.

PubMed

Benyamini, Miri; Zacksenhouse, Miriam

2015-01-01

Recent experiments with brain-machine-interfaces (BMIs) indicate that the extent of neural modulations increased abruptly upon starting to operate the interface, and especially after the monkey stopped moving its hand. In contrast, neural modulations that are correlated with the kinematics of the movement remained relatively unchanged. Here we demonstrate that similar changes are produced by simulated neurons that encode the relevant signals generated by an optimal feedback controller during simulated BMI experiments. The optimal feedback controller relies on state estimation that integrates both visual and proprioceptive feedback with prior estimations from an internal model. The processing required for optimal state estimation and control were conducted in the state-space, and neural recording was simulated by modeling two populations of neurons that encode either only the estimated state or also the control signal. Spike counts were generated as realizations of doubly stochastic Poisson processes with linear tuning curves. The model successfully reconstructs the main features of the kinematics and neural activity during regular reaching movements. Most importantly, the activity of the simulated neurons successfully reproduces the observed changes in neural modulations upon switching to brain control. Further theoretical analysis and simulations indicate that increasing the process noise during normal reaching movement results in similar changes in neural modulations. Thus, we conclude that the observed changes in neural modulations during BMI experiments can be attributed to increasing process noise associated with the imperfect BMI filter, and, more directly, to the resulting increase in the variance of the encoded signals associated with state estimation and the required control signal.

Optimal feedback control successfully explains changes in neural modulations during experiments with brain-machine interfaces

PubMed Central

Benyamini, Miri; Zacksenhouse, Miriam

2015-01-01

Recent experiments with brain-machine-interfaces (BMIs) indicate that the extent of neural modulations increased abruptly upon starting to operate the interface, and especially after the monkey stopped moving its hand. In contrast, neural modulations that are correlated with the kinematics of the movement remained relatively unchanged. Here we demonstrate that similar changes are produced by simulated neurons that encode the relevant signals generated by an optimal feedback controller during simulated BMI experiments. The optimal feedback controller relies on state estimation that integrates both visual and proprioceptive feedback with prior estimations from an internal model. The processing required for optimal state estimation and control were conducted in the state-space, and neural recording was simulated by modeling two populations of neurons that encode either only the estimated state or also the control signal. Spike counts were generated as realizations of doubly stochastic Poisson processes with linear tuning curves. The model successfully reconstructs the main features of the kinematics and neural activity during regular reaching movements. Most importantly, the activity of the simulated neurons successfully reproduces the observed changes in neural modulations upon switching to brain control. Further theoretical analysis and simulations indicate that increasing the process noise during normal reaching movement results in similar changes in neural modulations. Thus, we conclude that the observed changes in neural modulations during BMI experiments can be attributed to increasing process noise associated with the imperfect BMI filter, and, more directly, to the resulting increase in the variance of the encoded signals associated with state estimation and the required control signal. PMID:26042002

Modeling Geomagnetic Variations using a Machine Learning Framework

NASA Astrophysics Data System (ADS)

Cheung, C. M. M.; Handmer, C.; Kosar, B.; Gerules, G.; Poduval, B.; Mackintosh, G.; Munoz-Jaramillo, A.; Bobra, M.; Hernandez, T.; McGranaghan, R. M.

2017-12-01

We present a framework for data-driven modeling of Heliophysics time series data. The Solar Terrestrial Interaction Neural net Generator (STING) is an open source python module built on top of state-of-the-art statistical learning frameworks (traditional machine learning methods as well as deep learning). To showcase the capability of STING, we deploy it for the problem of predicting the temporal variation of geomagnetic fields. The data used includes solar wind measurements from the OMNI database and geomagnetic field data taken by magnetometers at US Geological Survey observatories. We examine the predictive capability of different machine learning techniques (recurrent neural networks, support vector machines) for a range of forecasting times (minutes to 12 hours). STING is designed to be extensible to other types of data. We show how STING can be used on large sets of data from different sensors/observatories and adapted to tackle other problems in Heliophysics.

Micro-Thermoelectric Generation Modules Fabricated with Low-Cost Mechanical Machining Processes

NASA Astrophysics Data System (ADS)

Liu, Dawei; Jin, A. J.; Peng, Wenbo; Li, Qiming; Gao, Hu; Zhu, Lianjun; Li, Fu; Zhu, Zhixiang

2017-05-01

Micro/small-scale thermoelectric generation modules are able to produce continuous, noise-free and reliable electricity power using low temperature differences that widely exist in nature or industry. These advantages bring them great application prospects in the fields of remote monitoring, microelectronics/micro-electromechanical systems (MEMS), medical apparatus and smart management system, which often require a power source free of maintenance and vibration. In this work, a prototypical thermoelectric module (12 mm × 12 mm × 0.8 mm) with 15 pairs of micro-scale thermoelectric legs (0.2 mm in width and 0.6 mm in height for each leg) is fabricated using a low-cost mechanical machining process. In this process, cutting and polishing are the main methods for the preparation of thermoelectric pairs from commercial polycrystalline materials and for the fabrication of electrode patterns. The as-fabricated module is tested for its power generation properties with the hot side heated by an electrical heater and the cold side by cold air. With the heater temperature of 375 K, the thermoelectric potential is about 9.1 mV, the short circuit current is about 14.5 mA, and the maximum output power is about 32.8 μW. The finite element method is applied to analyze the heat transfer of the module during our test. The temperature difference and heat flux are simulated, according to which the output powers at different temperatures are calculated, and the result is relatively consistent compared to the test results.

COMBINATION OF DENSITY AND ENERGY MODULATION IN MICROBUNCHING ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsai, Cheng Ying; Li, Rui

2016-05-01

Microbunching instability (MBI) has been one of the most challenging issues in the transport of high-brightness electron beams for modern recirculating or energy recovery linac machines. Recently we have developed and implemented a Vlasov solver [1] to calculate the microbunching gain for an arbitrary beamline lattice, based on the extension of existing theoretical formulation [2-4] for the microbunching amplification from an initial density perturbation to the final density modulation. For more thorough analyses, in addition to the case of (initial) density to (final) density amplification, we extend in this paper the previous formulation to more general cases, including energy tomore » density, density to energy and energy to energy amplifications for a recirculation machine. Such semi-analytical formulae are then incorporated into our Vlasov solver, and qualitative agreement is obtained when the semi-analytical Vlasov results are compared with particle tracking simulation using ELEGANT [5].« less

Parameter Estimation of the Thermal Network Model of a Machine Tool Spindle by Self-made Bluetooth Temperature Sensor Module

PubMed Central

Lo, Yuan-Chieh; Hu, Yuh-Chung; Chang, Pei-Zen

2018-01-01

Thermal characteristic analysis is essential for machine tool spindles because sudden failures may occur due to unexpected thermal issue. This article presents a lumped-parameter Thermal Network Model (TNM) and its parameter estimation scheme, including hardware and software, in order to characterize both the steady-state and transient thermal behavior of machine tool spindles. For the hardware, the authors develop a Bluetooth Temperature Sensor Module (BTSM) which accompanying with three types of temperature-sensing probes (magnetic, screw, and probe). Its specification, through experimental test, achieves to the precision ±(0.1 + 0.0029|t|) °C, resolution 0.00489 °C, power consumption 7 mW, and size Ø40 mm × 27 mm. For the software, the heat transfer characteristics of the machine tool spindle correlative to rotating speed are derived based on the theory of heat transfer and empirical formula. The predictive TNM of spindles was developed by grey-box estimation and experimental results. Even under such complicated operating conditions as various speeds and different initial conditions, the experiments validate that the present modeling methodology provides a robust and reliable tool for the temperature prediction with normalized mean square error of 99.5% agreement, and the present approach is transferable to the other spindles with a similar structure. For realizing the edge computing in smart manufacturing, a reduced-order TNM is constructed by Model Order Reduction (MOR) technique and implemented into the real-time embedded system. PMID:29473877

Parameter Estimation of the Thermal Network Model of a Machine Tool Spindle by Self-made Bluetooth Temperature Sensor Module.

PubMed

Lo, Yuan-Chieh; Hu, Yuh-Chung; Chang, Pei-Zen

2018-02-23

Thermal characteristic analysis is essential for machine tool spindles because sudden failures may occur due to unexpected thermal issue. This article presents a lumped-parameter Thermal Network Model (TNM) and its parameter estimation scheme, including hardware and software, in order to characterize both the steady-state and transient thermal behavior of machine tool spindles. For the hardware, the authors develop a Bluetooth Temperature Sensor Module (BTSM) which accompanying with three types of temperature-sensing probes (magnetic, screw, and probe). Its specification, through experimental test, achieves to the precision ±(0.1 + 0.0029|t|) °C, resolution 0.00489 °C, power consumption 7 mW, and size Ø40 mm × 27 mm. For the software, the heat transfer characteristics of the machine tool spindle correlative to rotating speed are derived based on the theory of heat transfer and empirical formula. The predictive TNM of spindles was developed by grey-box estimation and experimental results. Even under such complicated operating conditions as various speeds and different initial conditions, the experiments validate that the present modeling methodology provides a robust and reliable tool for the temperature prediction with normalized mean square error of 99.5% agreement, and the present approach is transferable to the other spindles with a similar structure. For realizing the edge computing in smart manufacturing, a reduced-order TNM is constructed by Model Order Reduction (MOR) technique and implemented into the real-time embedded system.

Preliminary Analysis of a Trusted Platform Module (TPM) Initialization Process

DTIC Science & Technology

2007-06-01

during system startup. For a laptop, extra precaution must be taken to prevent the machine from transitioning into a Sleep or Hibernate mode, since... hibernate mode [81]. D. TEST AND AUDIT After the system has gone through the predefined initialization and configuration processes, it needs to go...Conference on Computer and Communications Security, 2004, pp. 308-317. [45] L. Sarmenta, “TPM/J java -based API for the Trusted Platform Module (TPM

Zur Frage der Textauswahl in einem Lesekurs fuer die Sozialwissenschaften (On the Question of the Choice of Textbooks in a Course in the Social Sciences)

ERIC Educational Resources Information Center

Apelt, Hans-Peter

1974-01-01

Passages from three selected samples of textbooks are used to show what requirements are made of textbooks in the social sciences. Some hints are given to the teacher for converting reading suggestions into instructional material. Short texts from Karl Marx are also suggested. (Text is in German.) (IFS/WGA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adachi, T.; The Graduate University for Advanced Studies, Hayama, Miura, Kanagawa 240-0193; Arai, T.

A new type of pulse chopper called an Einzel lens chopper is described. An Einzel lens placed immediately after an electron cyclotron resonance ion source is driven by high-voltage pulses generated by a newly developed solid-state Marx generator. A rectangular negative barrier pulse-voltage is controlled in time, and the barrier pulse is turned on only when a beam pulse is required. The results of successful experiments are reported herein.

Southeast Asia Report, No. 1299.

DTIC Science & Technology

1983-06-14

IMPACT INTERNATIONAL magazine, London, issued between 13-26 May this year, the International Conference on Karl Marx was designed for Communist Party...reported by the Longon-based IMPACT IN- TERNATIONAL magazine) indicated that the communists still continued to mobilize the world’s communist...FOREIGN TRAWLERS SEIZED—Jakarta, 13 May (ANTARA-OANA)—Eleven Taiwanese fishing trawlers have been held for fish poaching in Indonesian waters within a

Contributions to a Marxist Critical Pedagogy of Becoming: Centering the Critique of the Gotha Programme: Part Two

ERIC Educational Resources Information Center

Malott, Curry; Ford, Derek R.

2015-01-01

Part two: This article is the second part of a project concerned with developing a Marxist critical pedagogy that moves beyond a critique of capital and toward a communist future. The article performs an educational reading of Marx's Critique of the Gotha Programme in order to delineate what a Marxist critical pedagogy of becoming communist might…

Interpretation du choix de carriere de la femme dans une perspective sociologique. (Interpretation of the Career Choices of Women from a Sociological Perspective).

ERIC Educational Resources Information Center

Gagne, Evelyn; Poirier, Pierre

1985-01-01

Examines the career choices and aspirations of women in two contexts: social divergency theories derived from Marx and Simmel, and personal symbolization theories based on George Mead's writings. Presents a series of propositions to help formulate a coherent social theory about women's career choices, supported by empirical confirmation. (AYC)

Compilation of 1990 Annual Reports of the Navy ELF Communications System Ecological Monitoring Program. Volume 1. Tabs A, B.

DTIC Science & Technology

1991-08-01

Site 18.0 8.4 9.2 8.6 21.2 I------- P Value------------------ Cal Mg2 K3 N 4 P5 With Covariates Site .193 .180 .472 .478 .113 Year .000 .000 .000...microbial population composition through production and excretion of compounds such as antibiotics, vitamins , amino acids, and hormones (Marx 1982, Keast and

A Deeper Dig: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Lewicki, Roy J.; Bailey, James

2016-01-01

The authors of this rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?" (Marx, Garcia, Butterfield, Kappen, and Baldwin 2015), were invited to respond as a result of their analyses of dominant faculty recognition paradigms and questioning of their intellectual foundations.…

In Conversation with Mark Olssen: On Foucault with Marx and Hegel

ERIC Educational Resources Information Center

Raaper, Rille; Olssen, Mark

2017-01-01

It is challenging to define who Michel Foucault was, whether he was a theorist, a philosopher, a historian, or a critic. In many of his books, and essays, Foucault denied being a philosopher or a theorist, nor did he want to be called a writer or a prophet. He described himself as an experimenter by saying that his work simply consists of…

Future-Focused Leadership: Preparing Schools, Students, and Communities for Tomorrow's Realities

ERIC Educational Resources Information Center

Marx, Gary

2006-01-01

If you've ever thought that you should spend less time reacting to events and more time anticipating changes that lurk just around the corner, then here's a book that gives you the ideas and vision you need to be a future-focused leader. Drawing from demographic trends and timeless wisdom, author Gary Marx outfits you with a living strategy that…

Use of PROMIS for Patients Undergoing Primary Total Shoulder Arthroplasty

PubMed Central

Dowdle, S. Blake; Glass, Natalie; Anthony, Chris A.; Hettrich, Carolyn M.

2017-01-01

Background: The Patient-Reported Outcomes Measurement Information System (PROMIS) consists of question banks for health domains through computer adaptive testing (CAT). Hypothesis: For patients with glenohumeral arthritis, (1) there would be high correlation between traditional patient-reported outcome (PRO) measures and the PROMIS upper extremity item bank (PROMIS UE) and PROMIS physical function CAT (PROMIS PF CAT), and (2) PROMIS PF CAT would not demonstrate ceiling effects. Study Design: Cohort study (diagnosis); Level of evidence, 3. Methods: Sixty-one patients with glenohumeral osteoarthritis were included. Each patient completed the American Shoulder and Elbow Surgeons (ASES) assessment form, Marx Shoulder Activity Scale, Short Form–36 physical function scale (SF-36 PF), EuroQol 5 Dimensions (EQ-5D) questionnaire, Western Ontario Osteoarthritis Shoulder (WOOS) index, PROMIS PF CAT, and the PROMIS UE. Correlation was defined as high (>0.7), moderate (0.4-0.6), or weak (0.2-0.3). Significant floor and ceiling effects were present if more than 15% of individuals scored the lowest or highest possible total score on any PRO. Results: The PROMIS PF demonstrated excellent correlation with the SF-36 PF (r = 0.81, P < .0001) and good correlation with the ASES (r = 0.62, P < .0001), EQ-5D (r = 0.64, P < .001), and WOOS index (r = 0.51, P < .01). The PROMIS PF demonstrated low correlation with the Marx scale (r = 0.29, P = .02). The PROMIS UE demonstrated good correlation with the ASES (r = 0.55, P < .0001), SF-36 (r = 0.53, P < .01), EQ-5D (r = 0.48, P < .01), and WOOS (r = 0.34, P <.01), and poor correlation with the Marx scale (r = 0.06, P = .62). There were no ceiling or floor effects observed. The mean number of items administered by the PROMIS PRO was 4. Conclusion: These data suggest that for a patient population with operative shoulder osteoarthritis, PROMIS UE and PROMIS PF CAT may be valid alternative PROs. Additionally, PROMIS PF CAT offers a decreased question burden with no ceiling effects. PMID:28944248

Eddy current loss analysis of open-slot fault-tolerant permanent-magnet machines based on conformal mapping method

NASA Astrophysics Data System (ADS)

Ji, Jinghua; Luo, Jianhua; Lei, Qian; Bian, Fangfang

2017-05-01

This paper proposed an analytical method, based on conformal mapping (CM) method, for the accurate evaluation of magnetic field and eddy current (EC) loss in fault-tolerant permanent-magnet (FTPM) machines. The aim of modulation function, applied in CM method, is to change the open-slot structure into fully closed-slot structure, whose air-gap flux density is easy to calculate analytically. Therefore, with the help of Matlab Schwarz-Christoffel (SC) Toolbox, both the magnetic flux density and EC density of FTPM machine are obtained accurately. Finally, time-stepped transient finite-element method (FEM) is used to verify the theoretical analysis, showing that the proposed method is able to predict the magnetic flux density and EC loss precisely.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao Xiaoqiang; Wang Hongfu; Zhang Shou

We present an approach for implementation of a 1->3 orbital state quantum cloning machine based on the quantum Zeno dynamics via manipulating three rf superconducting quantum interference device (SQUID) qubits to resonantly interact with a superconducting cavity assisted by classical fields. Through appropriate modulation of the coupling constants between rf SQUIDs and classical fields, the quantum cloning machine can be realized within one step. We also discuss the effects of decoherence such as spontaneous emission and the loss of cavity in virtue of master equation. The numerical simulation result reveals that the quantum cloning machine is especially robust against themore » cavity decay, since all qubits evolve in the decoherence-free subspace with respect to cavity decay due to the quantum Zeno dynamics.« less

An evaluation of the Meditech M250 and a comparison with other CT scanners.

PubMed

Greensmith, R; Richardson, R B; Sargood, A J; Stevens, P H; Mackintosh, I P

1985-11-01

The Meditech M250 computerised tomography (CT) machine was evaluated during the first half of 1984. Measurements were made of noise, modulation transfer function, slice width, radiation dose profile, uniformity and linearity of CT number, effective photon energy and parameters relating to machine specification, such as pixel size and scan time. All breakdowns were logged to indicate machine reliability. A comparison with the established EMI CT1010 and CT5005 was made for noise, resolution and multislice radiation dose, as well as the dose efficiency or quality (Q) factor for both head and body modes of operation. The M250 was found to perform to its intended specification with an acceptable level of reliability.

The Physics and Physical Chemistry of Molecular Machines.

PubMed

Astumian, R Dean; Mukherjee, Shayantani; Warshel, Arieh

2016-06-17

The concept of a "power stroke"-a free-energy releasing conformational change-appears in almost every textbook that deals with the molecular details of muscle, the flagellar rotor, and many other biomolecular machines. Here, it is shown by using the constraints of microscopic reversibility that the power stroke model is incorrect as an explanation of how chemical energy is used by a molecular machine to do mechanical work. Instead, chemically driven molecular machines operating under thermodynamic constraints imposed by the reactant and product concentrations in the bulk function as information ratchets in which the directionality and stopping torque or stopping force are controlled entirely by the gating of the chemical reaction that provides the fuel for the machine. The gating of the chemical free energy occurs through chemical state dependent conformational changes of the molecular machine that, in turn, are capable of generating directional mechanical motions. In strong contrast to this general conclusion for molecular machines driven by catalysis of a chemical reaction, a power stroke may be (and often is) an essential component for a molecular machine driven by external modulation of pH or redox potential or by light. This difference between optical and chemical driving properties arises from the fundamental symmetry difference between the physics of optical processes, governed by the Bose-Einstein relations, and the constraints of microscopic reversibility for thermally activated processes. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Performance prediction of optical image stabilizer using SVM for shaker-free production line

NASA Astrophysics Data System (ADS)

Kim, HyungKwan; Lee, JungHyun; Hyun, JinWook; Lim, Haekeun; Kim, GyuYeol; Moon, HyukSoo

2016-04-01

Recent smartphones adapt the camera module with optical image stabilizer(OIS) to enhance imaging quality in handshaking conditions. However, compared to the non-OIS camera module, the cost for implementing the OIS module is still high. One reason is that the production line for the OIS camera module requires a highly precise shaker table in final test process, which increases the unit cost of the production. In this paper, we propose a framework for the OIS quality prediction that is trained with the support vector machine and following module characterizing features : noise spectral density of gyroscope, optically measured linearity and cross-axis movement of hall and actuator. The classifier was tested on an actual production line and resulted in 88% accuracy of recall rate.

Study of wire electrical discharge machined folded-up corner cube retroreflector with a tunable cantilever beam

NASA Astrophysics Data System (ADS)

Chen, Yu-Fan; Wang, Yen-Hung; Tsai, Jui-che

2018-03-01

This work has developed an approach to construct a corner cube retroreflector (CCR). A two-dimensional cutout pattern is first fabricated with wire electrical discharge machining process. It is then folded up into a three-dimensional CCR suspended on a cantilever beam. The folded-up CCR may be driven through external actuators for optical modulation; it can also mechanically respond to perturbation, acceleration, etc., to function as a sensor. Mechanical (static and dynamic modeling) and optical (ray tracing) analyses are also performed.

Semi-supervised morphosyntactic classification of Old Icelandic.

PubMed

Urban, Kryztof; Tangherlini, Timothy R; Vijūnas, Aurelijus; Broadwell, Peter M

2014-01-01

We present IceMorph, a semi-supervised morphosyntactic analyzer of Old Icelandic. In addition to machine-read corpora and dictionaries, it applies a small set of declension prototypes to map corpus words to dictionary entries. A web-based GUI allows expert users to modify and augment data through an online process. A machine learning module incorporates prototype data, edit-distance metrics, and expert feedback to continuously update part-of-speech and morphosyntactic classification. An advantage of the analyzer is its ability to achieve competitive classification accuracy with minimum training data.

SU-E-T-325: The New Evaluation Method of the VMAT Plan Delivery Using Varian DynaLog Files and Modulation Complexity Score (MCS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tateoka, K; Graduate School of Medicine, Sapporo Medical University, Sapporo, JP; Fujimomo, K

2014-06-01

Purpose: The aim of the study is to evaluate the use of Varian DynaLog files to verify VMAT plans delivery and modulation complexity score (MCS) of VMAT. Methods: Delivery accuracy of machine performance was quantified by multileaf collimator (MLC) position errors, gantry angle errors and fluence delivery accuracy for volumetric modulated arc therapy (VMAT). The relationship between machine performance and plan complexity were also investigated using the modulation complexity score (MCS). Plan and Actual MLC positions, gantry angles and delivered fraction of monitor units were extracted from Varian DynaLog files. These factors were taken from the record and verify systemmore » of MLC control file. Planned and delivered beam data were compared to determine leaf position errors and gantry angle errors. Analysis was also performed on planned and actual fluence maps reconstructed from those of the DynaLog files. This analysis was performed for all treatment fractions of 5 prostate VMAT plans. The analysis of DynaLog files have been carried out by in-house programming in Visual C++. Results: The root mean square of leaf position and gantry angle errors were about 0.12 and 0.15, respectively. The Gamma of planned and actual fluence maps at 3%/3 mm criterion was about 99.21. The gamma of the leaf position errors were not directly related to plan complexity as determined by the MCS. Therefore, the gamma of the gantry angle errors were directly related to plan complexity as determined by the MCS. Conclusion: This study shows Varian dynalog files for VMAT plan can be diagnosed delivery errors not possible with phantom based quality assurance. Furthermore, the MCS of VMAT plan can evaluate delivery accuracy for patients receiving of VMAT. Machine performance was found to be directly related to plan complexity but this is not the dominant determinant of delivery accuracy.« less

Automated Grading of Gliomas using Deep Learning in Digital Pathology Images: A modular approach with ensemble of convolutional neural networks.

PubMed

Ertosun, Mehmet Günhan; Rubin, Daniel L

2015-01-01

Brain glioma is the most common primary malignant brain tumors in adults with different pathologic subtypes: Lower Grade Glioma (LGG) Grade II, Lower Grade Glioma (LGG) Grade III, and Glioblastoma Multiforme (GBM) Grade IV. The survival and treatment options are highly dependent of this glioma grade. We propose a deep learning-based, modular classification pipeline for automated grading of gliomas using digital pathology images. Whole tissue digitized images of pathology slides obtained from The Cancer Genome Atlas (TCGA) were used to train our deep learning modules. Our modular pipeline provides diagnostic quality statistics, such as precision, sensitivity and specificity, of the individual deep learning modules, and (1) facilitates training given the limited data in this domain, (2) enables exploration of different deep learning structures for each module, (3) leads to developing less complex modules that are simpler to analyze, and (4) provides flexibility, permitting use of single modules within the framework or use of other modeling or machine learning applications, such as probabilistic graphical models or support vector machines. Our modular approach helps us meet the requirements of minimum accuracy levels that are demanded by the context of different decision points within a multi-class classification scheme. Convolutional Neural Networks are trained for each module for each sub-task with more than 90% classification accuracies on validation data set, and achieved classification accuracy of 96% for the task of GBM vs LGG classification, 71% for further identifying the grade of LGG into Grade II or Grade III on independent data set coming from new patients from the multi-institutional repository.

Human Movement Detection and Idengification Using Pyroelectric Infrared Sensors

PubMed Central

Yun, Jaeseok; Lee, Sang-Shin

2014-01-01

Pyroelectric infrared (PIR) sensors are widely used as a presence trigger, but the analog output of PIR sensors depends on several other aspects, including the distance of the body from the PIR sensor, the direction and speed of movement, the body shape and gait. In this paper, we present an empirical study of human movement detection and idengification using a set of PIR sensors. We have developed a data collection module having two pairs of PIR sensors orthogonally aligned and modified Fresnel lenses. We have placed three PIR-based modules in a hallway for monitoring people; one module on the ceiling; two modules on opposite walls facing each other. We have collected a data set from eight subjects when walking in three different conditions: two directions (back and forth), three distance intervals (close to one wall sensor, in the middle, close to the other wall sensor) and three speed levels (slow, moderate, fast). We have used two types of feature sets: a raw data set and a reduced feature set composed of amplitude and time to peaks; and passage duration extracted from each PIR sensor. We have performed classification analysis with well-known machine learning algorithms, including instance-based learning and support vector machine. Our findings show that with the raw data set captured from a single PIR sensor of each of the three modules, we could achieve more than 92% accuracy in classifying the direction and speed of movement, the distance interval and idengifying subjects. We could also achieve more than 94% accuracy in classifying the direction, speed and distance and idengifying subjects using the reduced feature set extracted from two pairs of PIR sensors of each of the three modules. PMID:24803195

Automated Grading of Gliomas using Deep Learning in Digital Pathology Images: A modular approach with ensemble of convolutional neural networks

PubMed Central

Ertosun, Mehmet Günhan; Rubin, Daniel L.

2015-01-01

Brain glioma is the most common primary malignant brain tumors in adults with different pathologic subtypes: Lower Grade Glioma (LGG) Grade II, Lower Grade Glioma (LGG) Grade III, and Glioblastoma Multiforme (GBM) Grade IV. The survival and treatment options are highly dependent of this glioma grade. We propose a deep learning-based, modular classification pipeline for automated grading of gliomas using digital pathology images. Whole tissue digitized images of pathology slides obtained from The Cancer Genome Atlas (TCGA) were used to train our deep learning modules. Our modular pipeline provides diagnostic quality statistics, such as precision, sensitivity and specificity, of the individual deep learning modules, and (1) facilitates training given the limited data in this domain, (2) enables exploration of different deep learning structures for each module, (3) leads to developing less complex modules that are simpler to analyze, and (4) provides flexibility, permitting use of single modules within the framework or use of other modeling or machine learning applications, such as probabilistic graphical models or support vector machines. Our modular approach helps us meet the requirements of minimum accuracy levels that are demanded by the context of different decision points within a multi-class classification scheme. Convolutional Neural Networks are trained for each module for each sub-task with more than 90% classification accuracies on validation data set, and achieved classification accuracy of 96% for the task of GBM vs LGG classification, 71% for further identifying the grade of LGG into Grade II or Grade III on independent data set coming from new patients from the multi-institutional repository. PMID:26958289

Hierarchical surface code for network quantum computing with modules of arbitrary size

NASA Astrophysics Data System (ADS)

Li, Ying; Benjamin, Simon C.

2016-10-01

The network paradigm for quantum computing involves interconnecting many modules to form a scalable machine. Typically it is assumed that the links between modules are prone to noise while operations within modules have a significantly higher fidelity. To optimize fault tolerance in such architectures we introduce a hierarchical generalization of the surface code: a small "patch" of the code exists within each module and constitutes a single effective qubit of the logic-level surface code. Errors primarily occur in a two-dimensional subspace, i.e., patch perimeters extruded over time, and the resulting noise threshold for intermodule links can exceed ˜10 % even in the absence of purification. Increasing the number of qubits within each module decreases the number of qubits necessary for encoding a logical qubit. But this advantage is relatively modest, and broadly speaking, a "fine-grained" network of small modules containing only about eight qubits is competitive in total qubit count versus a "course" network with modules containing many hundreds of qubits.

On the Call for Action: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Le, Dianne

2016-01-01

Marx, Garcia, Butterfield, Kappen, and Baldwin (2015) lament the current state of affairs where there is sparse and inconsistent teaching preparation across business doctoral programs. The authors refute the idea that teaching is solely an art to be acquired rather than a skill to be learned. They explore the legacy rewards system--incentives…

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2015-10-01

Affairs electronic records of Iraq and Afghanistan veterans. Journal of consulting and clinical psychology , 82(4), 569. PRESENTATIONS Barretto...Veterans. Poster presented at the 49th Annual Meeting of the Association of Behavioral and Cognitive Therapies, Chicago, IL. Bovin, M. J., Marx, B...comparison of Operation Iraqi Freedom Deployment Phases. Poster presented at the 49th Annual Meeting of the Association of Behavioral and Cognitive

NOAA Climate Test Bed: CFSv.3 Planning Meeting (August 25-26, 2011)

Science.gov Websites

: Experience of porting CFSv2 NASA Ames SGI ICE platform (Marx) 12:30-14:00 Breakout discussion (1) Group 1A :00 NASA (Suarez) 09:00-09:20 GFDL (Rosati) 09:20-09:40 ECMWF (Molteni) 09:40-10:00 CMCC (Navarra) 10 modeling efforts at other modeling centers (e.g., GFDL, NCAR, NASA, COLA, DOE, ECMWF). Meeting Format: The

The 12th Annual International Meeting on Simulation Healthcare (IMSH) 2012

DTIC Science & Technology

2012-03-01

Title: Videorecording of Simulated Technical Errors as an Instructional Modality in a Central Venous Catheterization Course Sub Content: Knowledge...bedside procedures, such as insertion of peripheral and central venous catheters, are performed routinely by a wide spectrum of healthcare providers...with Chest Tubes and a Central Venous Line Monday January 30th 2012 4:00 pm – 5:15 pm Training Education and Assessment Shelby Marx, Donald

High Voltage, Low Inductance Hydrogen Thyratron Study Program.

DTIC Science & Technology

1981-01-01

E-E Electrode Spacing Ef Cathode Heater Voltage egy Peak Forward Grid Voltage epy Peak Forward Anode Voltage epx Peak Inverse Anode Voltage Eres... electrodes . ........... 68 30 Marx generator used for sample testing. ........... 68 31 Waveforms showing sample holdoff and sample breakdown 73 32...capability (a function of gas pressure and electrode spacing) could be related to its current rise time capability (a function of gas pressure and inductance

JPRS Report, Soviet Union, World Economy & International Relations, No. 10, October 1988

DTIC Science & Technology

1989-02-10

essence of the capitalist mode of production and via the decomposition of the Ricardian school, which became, according to Marx, the "vulgar apologists...the framework of the accepted limitations) if it is seen as a model reflecting quantitatively the participation or role of individual production ...From the viewpoint of a characteriza- tion of modern capitalist production the models of general balance proceeded from unrealistic premises: they

JPRS Report China

DTIC Science & Technology

1988-10-03

in Yunnan Province 38 Identification of Mycotoxins in Shaanxi Livestock Fodder 41 Aflotoxin Contamination of Peanut Products Surveyed 41 New Test...changes in man-to-man relations. It is said that the law of value is being used to effect the economic reform and to guide production, but frequently...Marx in his days. It has realized the defects in its very system and has by itself effected adjustments. Since the great economic crash and

Self-balanced modulation and magnetic rebalancing method for parallel multilevel inverters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Hui; Shi, Yanjun

A self-balanced modulation method and a closed-loop magnetic flux rebalancing control method for parallel multilevel inverters. The combination of the two methods provides for balancing of the magnetic flux of the inter-cell transformers (ICTs) of the parallel multilevel inverters without deteriorating the quality of the output voltage. In various embodiments a parallel multi-level inverter modulator is provide including a multi-channel comparator to generate a multiplexed digitized ideal waveform for a parallel multi-level inverter and a finite state machine (FSM) module coupled to the parallel multi-channel comparator, the FSM module to receive the multiplexed digitized ideal waveform and to generate amore » pulse width modulated gate-drive signal for each switching device of the parallel multi-level inverter. The system and method provides for optimization of the output voltage spectrum without influence the magnetic balancing.« less

In-situ trainable intrusion detection system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Symons, Christopher T.; Beaver, Justin M.; Gillen, Rob

A computer implemented method detects intrusions using a computer by analyzing network traffic. The method includes a semi-supervised learning module connected to a network node. The learning module uses labeled and unlabeled data to train a semi-supervised machine learning sensor. The method records events that include a feature set made up of unauthorized intrusions and benign computer requests. The method identifies at least some of the benign computer requests that occur during the recording of the events while treating the remainder of the data as unlabeled. The method trains the semi-supervised learning module at the network node in-situ, such thatmore » the semi-supervised learning modules may identify malicious traffic without relying on specific rules, signatures, or anomaly detection.« less

A machine learning approach to the accurate prediction of monitor units for a compact proton machine.

PubMed

Sun, Baozhou; Lam, Dao; Yang, Deshan; Grantham, Kevin; Zhang, Tiezhi; Mutic, Sasa; Zhao, Tianyu

2018-05-01

Clinical treatment planning systems for proton therapy currently do not calculate monitor units (MUs) in passive scatter proton therapy due to the complexity of the beam delivery systems. Physical phantom measurements are commonly employed to determine the field-specific output factors (OFs) but are often subject to limited machine time, measurement uncertainties and intensive labor. In this study, a machine learning-based approach was developed to predict output (cGy/MU) and derive MUs, incorporating the dependencies on gantry angle and field size for a single-room proton therapy system. The goal of this study was to develop a secondary check tool for OF measurements and eventually eliminate patient-specific OF measurements. The OFs of 1754 fields previously measured in a water phantom with calibrated ionization chambers and electrometers for patient-specific fields with various range and modulation width combinations for 23 options were included in this study. The training data sets for machine learning models in three different methods (Random Forest, XGBoost and Cubist) included 1431 (~81%) OFs. Ten-fold cross-validation was used to prevent "overfitting" and to validate each model. The remaining 323 (~19%) OFs were used to test the trained models. The difference between the measured and predicted values from machine learning models was analyzed. Model prediction accuracy was also compared with that of the semi-empirical model developed by Kooy (Phys. Med. Biol. 50, 2005). Additionally, gantry angle dependence of OFs was measured for three groups of options categorized on the selection of the second scatters. Field size dependence of OFs was investigated for the measurements with and without patient-specific apertures. All three machine learning methods showed higher accuracy than the semi-empirical model which shows considerably large discrepancy of up to 7.7% for the treatment fields with full range and full modulation width. The Cubist-based solution outperformed all other models (P < 0.001) with the mean absolute discrepancy of 0.62% and maximum discrepancy of 3.17% between the measured and predicted OFs. The OFs showed a small dependence on gantry angle for small and deep options while they were constant for large options. The OF decreased by 3%-4% as the field radius was reduced to 2.5 cm. Machine learning methods can be used to predict OF for double-scatter proton machines with greater prediction accuracy than the most popular semi-empirical prediction model. By incorporating the gantry angle dependence and field size dependence, the machine learning-based methods can be used for a sanity check of OF measurements and bears the potential to eliminate the time-consuming patient-specific OF measurements. © 2018 American Association of Physicists in Medicine.

A Module Experimental Process System Development Unit (MEPSDU). [development of low cost solar arrays

NASA Technical Reports Server (NTRS)

1981-01-01

The technical readiness of a cost effective process sequence that has the potential for the production of flat plate photovoltaic modules which met the price goal in 1986 of $.70 or less per Watt peak was demonstrated. The proposed process sequence was reviewed and laboratory verification experiments were conducted. The preliminary process includes the following features: semicrystalline silicon (10 cm by 10 cm) as the silicon input material; spray on dopant diffusion source; Al paste BSF formation; spray on AR coating; electroless Ni plate solder dip metallization; laser scribe edges; K & S tabbing and stringing machine; and laminated EVA modules.

Program Helps Decompose Complex Design Systems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Hall, Laura E.

1995-01-01

DeMAID (Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problems such as large platforms in outer space. Groups modular subsystems on basis of interactions among them. Saves considerable amount of money and time in total design process, particularly in new design problem in which order of modules has not been defined. Originally written for design problems, also applicable to problems containing modules (processes) that take inputs and generate outputs. Available in three machine versions: Macintosh written in Symantec's Think C 3.01, Sun, and SGI IRIS in C language.

On the application of neural networks to the classification of phase modulated waveforms

NASA Astrophysics Data System (ADS)

Buchenroth, Anthony; Yim, Joong Gon; Nowak, Michael; Chakravarthy, Vasu

2017-04-01

Accurate classification of phase modulated radar waveforms is a well-known problem in spectrum sensing. Identification of such waveforms aids situational awareness enabling radar and communications spectrum sharing. While various feature extraction and engineering approaches have sought to address this problem, the use of a machine learning algorithm that best utilizes these features is becomes foremost. In this effort, a comparison of a standard shallow and a deep learning approach are explored. Experiments provide insights into classifier architecture, training procedure, and performance.

Channel Efficiency with Security Enhancement for Remote Condition Monitoring of Multi Machine System Using Hybrid Huffman Coding

NASA Astrophysics Data System (ADS)

Datta, Jinia; Chowdhuri, Sumana; Bera, Jitendranath

2016-12-01

This paper presents a novel scheme of remote condition monitoring of multi machine system where a secured and coded data of induction machine with different parameters is communicated between a state-of-the-art dedicated hardware Units (DHU) installed at the machine terminal and a centralized PC based machine data management (MDM) software. The DHUs are built for acquisition of different parameters from the respective machines, and hence are placed at their nearby panels in order to acquire different parameters cost effectively during their running condition. The MDM software collects these data through a communication channel where all the DHUs are networked using RS485 protocol. Before transmitting, the parameter's related data is modified with the adoption of differential pulse coded modulation (DPCM) and Huffman coding technique. It is further encrypted with a private key where different keys are used for different DHUs. In this way a data security scheme is adopted during its passage through the communication channel in order to avoid any third party attack into the channel. The hybrid mode of DPCM and Huffman coding is chosen to reduce the data packet length. A MATLAB based simulation and its practical implementation using DHUs at three machine terminals (one healthy three phase, one healthy single phase and one faulty three phase machine) proves its efficacy and usefulness for condition based maintenance of multi machine system. The data at the central control room are decrypted and decoded using MDM software. In this work it is observed that Chanel efficiency with respect to different parameter measurements has been increased very much.

High-pressure microscopy for tracking dynamic properties of molecular machines.

PubMed

Nishiyama, Masayoshi

2017-12-01

High-pressure microscopy is one of the powerful techniques to visualize the effects of hydrostatic pressures on research targets. It could be used for monitoring the pressure-induced changes in the structure and function of molecular machines in vitro and in vivo. This review focuses on the dynamic properties of the assemblies and machines, analyzed by means of high-pressure microscopy measurement. We developed a high-pressure microscope that is optimized both for the best image formation and for the stability to hydrostatic pressure up to 150 MPa. Application of pressure could change polymerization and depolymerization processes of the microtubule cytoskeleton, suggesting a modulation of the intermolecular interaction between tubulin molecules. A novel motility assay demonstrated that high hydrostatic pressure induces counterclockwise (CCW) to clockwise (CW) reversals of the Escherichia coli flagellar motor. The present techniques could be extended to study how molecular machines in complicated systems respond to mechanical stimuli. Copyright © 2017 Elsevier B.V. All rights reserved.

High-resolution imaging optomechatronics for precise liquid crystal display module bonding automated optical inspection

NASA Astrophysics Data System (ADS)

Ni, Guangming; Liu, Lin; Zhang, Jing; Liu, Juanxiu; Liu, Yong

2018-01-01

With the development of the liquid crystal display (LCD) module industry, LCD modules become more and more precise with larger sizes, which demands harsh imaging requirements for automated optical inspection (AOI). Here, we report a high-resolution and clearly focused imaging optomechatronics for precise LCD module bonding AOI inspection. It first presents and achieves high-resolution imaging for LCD module bonding AOI inspection using a line scan camera (LSC) triggered by a linear optical encoder, self-adaptive focusing for the whole large imaging region using LSC, and a laser displacement sensor, which reduces the requirements of machining, assembly, and motion control of AOI devices. Results show that this system can directly achieve clearly focused imaging for AOI inspection of large LCD module bonding with 0.8 μm image resolution, 2.65-mm scan imaging width, and no limited imaging width theoretically. All of these are significant for AOI inspection in the LCD module industry and other fields that require imaging large regions with high resolution.

Influence of tumor location on the intensity-modulated radiation therapy plan of helical tomotherapy.

PubMed

Xu, Yingjie; Yan, Hui; Hu, Zhihui; Ma, Pan; Men, Kuo; Huang, Peng; Ren, Wenting; Dai, Jianrong; Li, Yexiong

2017-01-01

Given the design of the Helical TomoTherapy device, the patient's central axis is routinely aligned with the machine's rotational axis to prevent the patient's body from colliding with the machine walls. However, for treatment of tumors located away from the patient's central axis, this position may not be optimal as the adequate radiation dose may not reach the affected site. Our study aimed to investigate the influence of tumor location on dose quality and delivery efficiency of tomotherapy plans. A phantom and 15 patients were selected for this study. Two plans, A and B, were implemented for each case. In plan A, the patient's central axis was aligned with the machine's rotational axis, whereas in plan B, the center of the planning target volume (PTV) was aligned with the machine's rotational axis. Both plans were optimized with the same planning parameters, and the dose quality of the plans was evaluated using dosimetrics. The delivery efficiency was determined from delivery time and monitor units (MUs). A paired t-test or nonparametric Wilcoxon signed-rank test was performed for statistical comparison. In the phantom study, the median delivery times were 358 and 336 seconds for plans A and B, respectively, and this difference was significant (p = 0.005). In the patient study, the median delivery times were 348 and 317 seconds for plans A and B, respectively, and this difference was also significant (p = 0.001). The dose qualities of both plans for each patient were nearly identical. No significant differences were found in the conformal index, heterogeneity index, and mean dose delivered to normal tissue between the plans. Both phantom and patient studies showed that for normal-sized patients, the delivery time reduced as the distance between the PTV and the patient's central axis increased when the PTV center was aligned with the machine axis. In conclusion, aligning the PTV center with the machine's rotational axis by shifting the patient during tomotherapy reduces the delivery time without compromising the dose quality of intensity-modulated radiation therapy. Copyright © 2017 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Efficient forced vibration reanalysis method for rotating electric machines

NASA Astrophysics Data System (ADS)

Saito, Akira; Suzuki, Hiromitsu; Kuroishi, Masakatsu; Nakai, Hideo

2015-01-01

Rotating electric machines are subject to forced vibration by magnetic force excitation with wide-band frequency spectrum that are dependent on the operating conditions. Therefore, when designing the electric machines, it is inevitable to compute the vibration response of the machines at various operating conditions efficiently and accurately. This paper presents an efficient frequency-domain vibration analysis method for the electric machines. The method enables the efficient re-analysis of the vibration response of electric machines at various operating conditions without the necessity to re-compute the harmonic response by finite element analyses. Theoretical background of the proposed method is provided, which is based on the modal reduction of the magnetic force excitation by a set of amplitude-modulated standing-waves. The method is applied to the forced response vibration of the interior permanent magnet motor at a fixed operating condition. The results computed by the proposed method agree very well with those computed by the conventional harmonic response analysis by the FEA. The proposed method is then applied to the spin-up test condition to demonstrate its applicability to various operating conditions. It is observed that the proposed method can successfully be applied to the spin-up test conditions, and the measured dominant frequency peaks in the frequency response can be well captured by the proposed approach.

On "White Supremacy" and Caricaturing, Misrepresenting and Dismissing Marx and Marxism: A Response to David Gillborn's "Who's Afraid of Critical Race Theory in Education".

ERIC Educational Resources Information Center

Cole, Mike

2009-01-01

In this journal in 2007, the author and Alpesh Maisuria critiqued two central tenets of Critical Race Theory (CRT) from a Marxist perspective (Cole and Maisuria, 2007). These are its primacy of "race" over class, and its concept of "white supremacy". Part of the critique focused on the work of leading UK Critical Race Theorist,…

JPRS Report, China.

DTIC Science & Technology

1991-07-12

of thinking is different. This also Mikhailovski who tightly embraced the method of "sub- demonstrates the cruelty of the struggle. It would not...early days of libera- thinking?" (Selected Works of Marx and Engels Vol 3, p tion-we could not or did not feel free to seek truth from 533) Indeed...because he declares that individual with opportunities of free competition which, such "universal love" means "loving everyone, including by crashing the

Designing for Inter-Organizational Coordination in Indonesia’s Maritime Domain

DTIC Science & Technology

2014-12-01

the-week distribution (Figure 24), the concentration of accidents appears to take place Tuesday tln·ough Saturday, with the percentage well above 13...incidents. Meanwhile, the peak takes place on Tuesday to Thursday as shown in the Figure 51 below. Figure 51. Violations at sea time wheel (Data from...outlook: Southeast Asia 2008–2009. Singapore: ISEAS Publishing. Larsen, Richard J. & Marx, Morris L. (1981). An introduction to mathematical

The new productivity challenge.

PubMed

Drucker, P F

1991-01-01

"The single greatest challenge facing managers in the developed countries of the world is to raise the productivity of knowledge and service workers," writes Peter F. Drucker in "The New Productivity Challenge." Productivity, says Drucker, ultimately defeated Karl Marx; it gave common laborers the chance to earn the wages of skilled workers. Now five distinct steps will raise the productivity of knowledge and service workers--and not only stimulate new economic growth but also defuse rising social tensions.

A Hierarchy of Needs in International Relations

DTIC Science & Technology

2009-03-01

partner, and confidant while keeping life relatively normal for our two girls . Pam did not know she would have to read all of my papers and...2008). 59 Charles J. Wheelan, Naked Economics: Undressing the Dismal Science, 1st ed. (New York: Norton, 2002), 19. 60 Ibid., 36. 27...London: W. Reeves, 1888), 31, http://ebooks.adelaide.edu.au/m/marx/karl/m39c/ (accessed October 31, 2008). 63 Wheelan, Naked Economics: Undressing the

USSR Report, Political and Sociological Affairs.

DTIC Science & Technology

1984-03-15

national liberation move- ment. Modern education and freedom of the press promoted national awa- kening and led to the formation, as Marx put it, of...predominance of the poperfied classes, especially the bourgeois upper crust, over the popular masses. Their awa- kening and emancipation from medie- val...Aden not only as a military base to protect their in- terests in the Middle East, and as an excellent merchant port, but also as an outpost for

JPRS Report West Europe

DTIC Science & Technology

1988-10-12

in French 8 Jul 88 pp 40-41 [Article by Jacques Gevers: "The Optimistic Mandarin"] [Text] Bourgeois childhood and social fiber, loyalty to Marx and...recently tabled by the govern- ment. Flanked by the two ministers of institutional reforms, Philippe Moureaux and Jean Luc Dehaene, he then presented the...executive and its shift to a proportional system. As for Jean Luch Dehaene, he particularly stressed the need for cooperation among the various levels of

The International Context of Teacher Preparation: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Gibbs, Graham

2016-01-01

This paper, a rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?" by Marx et al., suggests glancing at practices outside the United States to get some perspective on the nature of the problem of why so little emphasis is placed on teaching preparation in business doctoral…

3. EXTERIOR/STREET LEVEL VIEW, LOOKING WEST ALONG FIRST AVENUE NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. EXTERIOR/STREET LEVEL VIEW, LOOKING WEST ALONG FIRST AVENUE NORTH WITH (LEFT TO RIGHT) CALDWELL-MILNER, MCADORY, JOHN HAND, WOODWARD BUILDINGS AND BROWN MARX BUILDING (RIGHT). ALSO PICTURED IS THE BANK FOR SAVINGS BUILDING (TOP RIGHT) AND THE RAILROAD RESERVATION (TOP LEFT TO RIGHT). VIEW TAKEN AS CITY THAWS FROM A MARCH BLIZZARD. - Heaviest Corner on Earth (Commercial), First Avenue, North & Twentieth (20th) Street, North, Birmingham, Jefferson County, AL

On Being Holier-Than-Thou: A Critique of Curry Malott's "Pseudo-Marxism and the Reformist Retreat from Revolution"

ERIC Educational Resources Information Center

McGrew, Ken

2011-01-01

In the May 2011 edition of this journal, Curry Malott contributed an essay review of Jean Anyon's "Marx and Education" (2011). The author would summarize Mallot's critiques of her book as follows: (1) she didn't write the book that he wanted her to write; (2) she didn't cite the authors that he wanted her to cite; and (3) her work is anti-Marxist…

Improved soldering iron tip

NASA Technical Reports Server (NTRS)

Vanasse, M. A.

1976-01-01

Nickel-plated device, with machined recesses matching the multipin pattern of particular circuit module, facilitates repairs to electronic systems and reduces chance of damage to adjacent components. Nickel-plating reduces oxidation and scaling. Recesses retain sufficient amount of molten solder to uniformly wet pins for simultaneous heating and extraction.

BASIC Instructional Program: System Documentation.

ERIC Educational Resources Information Center

Dageforde, Mary L.

This report documents the BASIC Instructional Program (BIP), a "hands-on laboratory" that teaches elementary programming in the BASIC language, as implemented in the MAINSAIL language, a machine-independent revision of SAIL which should facilitate implementation of BIP on other computing systems. Eight instructional modules which make up…

Performance evaluation of automated manufacturing systems using generalized stochastic Petri Nets. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Al-Jaar, Robert Y.; Desrochers, Alan A.

1989-01-01

The main objective of this research is to develop a generic modeling methodology with a flexible and modular framework to aid in the design and performance evaluation of integrated manufacturing systems using a unified model. After a thorough examination of the available modeling methods, the Petri Net approach was adopted. The concurrent and asynchronous nature of manufacturing systems are easily captured by Petri Net models. Three basic modules were developed: machine, buffer, and Decision Making Unit. The machine and buffer modules are used for modeling transfer lines and production networks. The Decision Making Unit models the functions of a computer node in a complex Decision Making Unit Architecture. The underlying model is a Generalized Stochastic Petri Net (GSPN) that can be used for performance evaluation and structural analysis. GSPN's were chosen because they help manage the complexity of modeling large manufacturing systems. There is no need to enumerate all the possible states of the Markov Chain since they are automatically generated from the GSPN model.

Integral Fast Reactor fuel pin processor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levinskas, D.

1993-01-01

This report discusses the pin processor which receives metal alloy pins cast from recycled Integral Fast Reactor (IFR) fuel and prepares them for assembly into new IFR fuel elements. Either full length as-cast or precut pins are fed to the machine from a magazine, cut if necessary, and measured for length, weight, diameter and deviation from straightness. Accepted pins are loaded into cladding jackets located in a magazine, while rejects and cutting scraps are separated into trays. The magazines, trays, and the individual modules that perform the different machine functions are assembled and removed using remote manipulators and master-slaves.

Integral Fast Reactor fuel pin processor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levinskas, D.

1993-03-01

This report discusses the pin processor which receives metal alloy pins cast from recycled Integral Fast Reactor (IFR) fuel and prepares them for assembly into new IFR fuel elements. Either full length as-cast or precut pins are fed to the machine from a magazine, cut if necessary, and measured for length, weight, diameter and deviation from straightness. Accepted pins are loaded into cladding jackets located in a magazine, while rejects and cutting scraps are separated into trays. The magazines, trays, and the individual modules that perform the different machine functions are assembled and removed using remote manipulators and master-slaves.

Machining of Two-Dimensional Sinusoidal Defects on Ignition-Type Capsules to Study Hydrodynamic Instability at the National Ignition Facility

DOE PAGES

Giraldez, E. M.; Hoppe Jr., M. L.; Hoover, D. E.; ...

2016-07-07

Hydrodynamic instability growth and its effects on capsule implosion performance are being studied at the National Ignition Facility (NIF). Experimental results have shown that low-mode instabilities are the primary culprit for yield degradation. Ignition type capsules with machined 2D sinusoidal defects were used to measure low-mode hydrodynamic instability growth in the acceleration phase of the capsule implosion. The capsules were imploded using ignition-relevant laser pulses and the ablation-front modulation growth was measured using x-ray radiography. The experimentally measured growth was in good agreement with simulations.

COBRA accelerator for Sandia ICF diode research at Cornell University

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, D.L.; Ingwersen, P.; Bennett, L.F.

1995-05-01

The new COBRA accelerator is being built in stages at the Laboratory of Plasma Studies in Cornell University where its applications will include extraction diode and ion beam research in support of the light ion inertial confinement fusion (ICF) program at Sandia National Laboratories. The 4- to 5-MV, 125- to 250-kA accelerator is based on a four-cavity inductive voltage adder (IVA) design. It is a combination of new ferromagnetically-isolated cavities and self magnetically insulated transmission line (MITL) hardware and components from existing Sandia and Cornell facilities: Marx generator capacitors, hardware, and power supply from the DEMON facility; water pulse formingmore » lines (PFL) and gas switch from the Subsystem Test Facility (STF); a HERMES-III intermediate store capacitor (ISC); and a modified ion diode from Cornell`s LION. The present accelerator consists of a single modified cavity similar to those of the Sandia SABRE accelerator and will be used to establish an operating system for the first stage initial lower voltage testing. Four new cavities will be fabricated and delivered in the first half of FY96 to complete the COBRA accelerator. COBRA is unique in the sense that each cavity is driven by a single pulse forming line, and the IVA output polarity may be reversed by rotating the cavities 180{degrees} about their vertical axis. The site preparations, tank construction, and diode design and development are taking place at Cornell with growing enthusiasm as this machine becomes a reality. Preliminary results with the single cavity and short positive inner cylinder MITL configuration will soon be available.« less

Non-invasive estimate of blood glucose and blood pressure from a photoplethysmograph by means of machine learning techniques.

PubMed

Monte-Moreno, Enric

2011-10-01

This work presents a system for a simultaneous non-invasive estimate of the blood glucose level (BGL) and the systolic (SBP) and diastolic (DBP) blood pressure, using a photoplethysmograph (PPG) and machine learning techniques. The method is independent of the person whose values are being measured and does not need calibration over time or subjects. The architecture of the system consists of a photoplethysmograph sensor, an activity detection module, a signal processing module that extracts features from the PPG waveform, and a machine learning algorithm that estimates the SBP, DBP and BGL values. The idea that underlies the system is that there is functional relationship between the shape of the PPG waveform and the blood pressure and glucose levels. As described in this paper we tested this method on 410 individuals without performing any personalized calibration. The results were computed after cross validation. The machine learning techniques tested were: ridge linear regression, a multilayer perceptron neural network, support vector machines and random forests. The best results were obtained with the random forest technique. In the case of blood pressure, the resulting coefficients of determination for reference vs. prediction were R(SBP)(2)=0.91, R(DBP)(2)=0.89, and R(BGL)(2)=0.90. For the glucose estimation, distribution of the points on a Clarke error grid placed 87.7% of points in zone A, 10.3% in zone B, and 1.9% in zone D. Blood pressure values complied with the grade B protocol of the British Hypertension society. An effective system for estimate of blood glucose and blood pressure from a photoplethysmograph is presented. The main advantage of the system is that for clinical use it complies with the grade B protocol of the British Hypertension society for the blood pressure and only in 1.9% of the cases did not detect hypoglycemia or hyperglycemia. Copyright © 2011 Elsevier B.V. All rights reserved.

Machine-learned analysis of the association of next-generation sequencing-based human TRPV1 and TRPA1 genotypes with the sensitivity to heat stimuli and topically applied capsaicin.

PubMed

Kringel, Dario; Geisslinger, Gerd; Resch, Eduard; Oertel, Bruno G; Thrun, Michael C; Heinemann, Sarah; Lötsch, Jörn

2018-03-27

Heat pain and its modulation by capsaicin varies among subjects in experimental and clinical settings. A plausible cause is a genetic component, of which TRPV1 ion channels, by their response to both heat and capsaicin, are primary candidates. However, TRPA1 channels can heterodimerize with TRPV1 channels and carry genetic variants reported to modulate heat pain sensitivity. To address the role of these candidate genes in capsaicin-induced hypersensitization to heat, pain thresholds acquired before and after topical application of capsaicin and TRPA1/TRPV1 exomic sequences derived by next-generation sequencing were assessed in n = 75 healthy volunteers and the genetic information comprised 278 loci. Gaussian mixture modeling indicated 2 phenotype groups with high or low capsaicin-induced hypersensitization to heat. Unsupervised machine learning implemented as swarm-based clustering hinted at differences in the genetic pattern between these phenotype groups. Several methods of supervised machine learning implemented as random forests, adaptive boosting, k-nearest neighbors, naive Bayes, support vector machines, and for comparison, binary logistic regression predicted the phenotype group association consistently better when based on the observed genotypes than when using a random permutation of the exomic sequences. Of note, TRPA1 variants were more important for correct phenotype group association than TRPV1 variants. This indicates a role of the TRPA1 and TRPV1 next-generation sequencing-based genetic pattern in the modulation of the individual response to heat-related pain phenotypes. When considering earlier evidence that topical capsaicin can induce neuropathy-like quantitative sensory testing patterns in healthy subjects, implications for future analgesic treatments with transient receptor potential inhibitors arise.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal.

[Research and development of portable hypertension therapeutic apparatus based on biofeedback mechanism].

PubMed

Huang, Rong; He, Hongmei; Pi, Xitian; Diao, Ziji; Zhao, Suwen

2014-06-01

Non-drug treatment of hypertension has become a research hotspot, which might overcome the heavy economic burden and side effects of drug treatment for the patients. Because of the good treatment effect and convenient operation, a new treatment based on slow breathing training is increasingly becoming a kind of physical therapy for hypertension. This paper explains the principle of hypertension treatment based on slow breathing training method, and introduces the overall structure of the portable blood pressure controlling instrument, including breathing detection circuit, the core control module, audio module, memory module and man-machine interaction module. We give a brief introduction to the instrument and the software in this paper. The prototype testing results showed that the treatment had a significant effect on controlling the blood pressure.

Mars Science Laboratory CHIMRA/IC/DRT Flight Software for Sample Acquisition and Processing

NASA Technical Reports Server (NTRS)

Kim, Won S.; Leger, Chris; Carsten, Joseph; Helmick, Daniel; Kuhn, Stephen; Redick, Richard; Trujillo, Diana

2013-01-01

The design methodologies of using sequence diagrams, multi-process functional flow diagrams, and hierarchical state machines were successfully applied in designing three MSL (Mars Science Laboratory) flight software modules responsible for handling actuator motions of the CHIMRA (Collection and Handling for In Situ Martian Rock Analysis), IC (Inlet Covers), and DRT (Dust Removal Tool) mechanisms. The methodologies were essential to specify complex interactions with other modules, support concurrent foreground and background motions, and handle various fault protections. Studying task scenarios with multi-process functional flow diagrams yielded great insight to overall design perspectives. Since the three modules require three different levels of background motion support, the methodologies presented in this paper provide an excellent comparison. All three modules are fully operational in flight.

Using machine learning classifiers to assist healthcare-related decisions: classification of electronic patient records.

PubMed

Pollettini, Juliana T; Panico, Sylvia R G; Daneluzzi, Julio C; Tinós, Renato; Baranauskas, José A; Macedo, Alessandra A

2012-12-01

Surveillance Levels (SLs) are categories for medical patients (used in Brazil) that represent different types of medical recommendations. SLs are defined according to risk factors and the medical and developmental history of patients. Each SL is associated with specific educational and clinical measures. The objective of the present paper was to verify computer-aided, automatic assignment of SLs. The present paper proposes a computer-aided approach for automatic recommendation of SLs. The approach is based on the classification of information from patient electronic records. For this purpose, a software architecture composed of three layers was developed. The architecture is formed by a classification layer that includes a linguistic module and machine learning classification modules. The classification layer allows for the use of different classification methods, including the use of preprocessed, normalized language data drawn from the linguistic module. We report the verification and validation of the software architecture in a Brazilian pediatric healthcare institution. The results indicate that selection of attributes can have a great effect on the performance of the system. Nonetheless, our automatic recommendation of surveillance level can still benefit from improvements in processing procedures when the linguistic module is applied prior to classification. Results from our efforts can be applied to different types of medical systems. The results of systems supported by the framework presented in this paper may be used by healthcare and governmental institutions to improve healthcare services in terms of establishing preventive measures and alerting authorities about the possibility of an epidemic.

AstroML: "better, faster, cheaper" towards state-of-the-art data mining and machine learning

NASA Astrophysics Data System (ADS)

Ivezic, Zeljko; Connolly, Andrew J.; Vanderplas, Jacob

2015-01-01

We present AstroML, a Python module for machine learning and data mining built on numpy, scipy, scikit-learn, matplotlib, and astropy, and distributed under an open license. AstroML contains a growing library of statistical and machine learning routines for analyzing astronomical data in Python, loaders for several open astronomical datasets (such as SDSS and other recent major surveys), and a large suite of examples of analyzing and visualizing astronomical datasets. AstroML is especially suitable for introducing undergraduate students to numerical research projects and for graduate students to rapidly undertake cutting-edge research. The long-term goal of astroML is to provide a community repository for fast Python implementations of common tools and routines used for statistical data analysis in astronomy and astrophysics (see http://www.astroml.org).

The optional selection of micro-motion feature based on Support Vector Machine

NASA Astrophysics Data System (ADS)

Li, Bo; Ren, Hongmei; Xiao, Zhi-he; Sheng, Jing

2017-11-01

Micro-motion form of target is multiple, different micro-motion forms are apt to be modulated, which makes it difficult for feature extraction and recognition. Aiming at feature extraction of cone-shaped objects with different micro-motion forms, this paper proposes the best selection method of micro-motion feature based on support vector machine. After the time-frequency distribution of radar echoes, comparing the time-frequency spectrum of objects with different micro-motion forms, features are extracted based on the differences between the instantaneous frequency variations of different micro-motions. According to the methods based on SVM (Support Vector Machine) features are extracted, then the best features are acquired. Finally, the result shows the method proposed in this paper is feasible under the test condition of certain signal-to-noise ratio(SNR).

SAD-Based Stereo Vision Machine on a System-on-Programmable-Chip (SoPC)

PubMed Central

Zhang, Xiang; Chen, Zhangwei

2013-01-01

This paper, proposes a novel solution for a stereo vision machine based on the System-on-Programmable-Chip (SoPC) architecture. The SOPC technology provides great convenience for accessing many hardware devices such as DDRII, SSRAM, Flash, etc., by IP reuse. The system hardware is implemented in a single FPGA chip involving a 32-bit Nios II microprocessor, which is a configurable soft IP core in charge of managing the image buffer and users' configuration data. The Sum of Absolute Differences (SAD) algorithm is used for dense disparity map computation. The circuits of the algorithmic module are modeled by the Matlab-based DSP Builder. With a set of configuration interfaces, the machine can process many different sizes of stereo pair images. The maximum image size is up to 512 K pixels. This machine is designed to focus on real time stereo vision applications. The stereo vision machine offers good performance and high efficiency in real time. Considering a hardware FPGA clock of 90 MHz, 23 frames of 640 × 480 disparity maps can be obtained in one second with 5 × 5 matching window and maximum 64 disparity pixels. PMID:23459385

Developpement d'une commande pour une hydrolienne de riviere et optimisation =

NASA Astrophysics Data System (ADS)

Tetrault, Philippe

Suivant le developpement des energies renouvelables, la presente etude se veut une base theorique quant aux principes fondamentaux necessaires au bon fonctionnement et a l'implementation d'une hydrolienne de riviere. La problematique derriere ce nouveau type d'appareil est d'abord presentee. La machine electrique utilisee dans l'application, c'est-a-dire la machine synchrone a aimants permanents, est etudiee : ses equations dynamiques mecaniques et electriques sont developpees, introduisant en meme temps le concept de referentiel tournant. Le fonctionnement de l'onduleur utilise, soit un montage en pont complet a deux niveaux a semi-conducteurs, est explique et mit en equation pour permettre de comprendre les strategies de modulation disponibles. Un bref historique de ces strategies est fait avant de mettre l'emphase sur la modulation vectorielle qui sera celle utilisee pour l'application en cours. Les differents modules sont assembles dans une simulation Matlab pour confirmer leur bon fonctionnement et comparer les resultats de la simulation avec les calculs theoriques. Differents algorithmes permettant de traquer et maintenir un point de fonctionnement optimal sont presentes. Le comportement de la riviere est etudie afin d'evaluer l'ampleur des perturbations que le systeme devra gerer. Finalement, une nouvelle approche est presentee et comparee a une strategie plus conservatrice a l'aide d'un autre modele de simulation Matlab.

Engineering a Classroom Discussion.

ERIC Educational Resources Information Center

Smith, Walter E.

1983-01-01

Describes physical science activities that civil/mechanical engineers (serving as resource persons) can use with students during units on force, work, center of gravity, simple machines, and other basic mechanics concepts. Activities are adapted from Career Oriented Modules to Explore Topics in Science for grades 5-9 (COMETS). (Author/JN)

Domestic wash water reclamation

NASA Technical Reports Server (NTRS)

Hall, J. B., Jr.; Batten, C. E.; Wilkins, J. R.

1974-01-01

System consists of filtration unit, reverse-osmosis module, tanks, pumps, plumbing, and various gauges, meters, and valves. After water is used in washing machine or shower, it is collected in holding tank. Water is pumped through series of five particulate filters. Pressure tank supplies processed water to commode water closet.

Dopamine Modulates Reward Expectancy During Performance of a Slot Machine Task in Rats: Evidence for a ‘Near-miss' Effect

PubMed Central

Winstanley, Catharine A; Cocker, Paul J; Rogers, Robert D

2011-01-01

Cognitive accounts of gambling suggest that the experience of almost winning—so-called ‘near-misses'—encourage continued play and accelerate the development of pathological gambling (PG) in vulnerable individuals. One explanation for this effect is that near-misses signal imminent winning outcomes and heighten reward expectancy, galvanizing further play. Determining the neurochemical processes underlying the drive to gamble could facilitate the development of more effective treatments for PG. With this aim in mind, we evaluated rats' performance on a novel model of slot machine play, a form of gambling in which near-miss events are particularly salient. Subjects responded to a series of three flashing lights, loosely analogous to the wheels of a slot machine, causing the lights to set to ‘on' or ‘off'. A winning outcome was signaled if all three lights were illuminated. At the end of each trial, rats chose between responding on the ‘collect' lever, resulting in reward on win trials, but a time penalty on loss trials, or starting a new trial. Rats showed a marked preference for the collect lever when both two and three lights were illuminated, indicating heightened reward expectancy following near-misses similar to wins. Erroneous collect responses were increased by amphetamine and the D2 receptor agonist quinpirole, but not by the D1 receptor agonist SKF 81297 or receptor subtype selective antagonists. These data suggest that dopamine modulates reward expectancy following the experience of almost winning during slot machine play, via activity at D2 receptors, and this may result in an enhancement of the near-miss effect and facilitate further gambling. PMID:21209612

Dopamine modulates reward expectancy during performance of a slot machine task in rats: evidence for a 'near-miss' effect.

PubMed

Winstanley, Catharine A; Cocker, Paul J; Rogers, Robert D

2011-04-01

Cognitive accounts of gambling suggest that the experience of almost winning-so-called 'near-misses'-encourage continued play and accelerate the development of pathological gambling (PG) in vulnerable individuals. One explanation for this effect is that near-misses signal imminent winning outcomes and heighten reward expectancy, galvanizing further play. Determining the neurochemical processes underlying the drive to gamble could facilitate the development of more effective treatments for PG. With this aim in mind, we evaluated rats' performance on a novel model of slot machine play, a form of gambling in which near-miss events are particularly salient. Subjects responded to a series of three flashing lights, loosely analogous to the wheels of a slot machine, causing the lights to set to 'on' or 'off'. A winning outcome was signaled if all three lights were illuminated. At the end of each trial, rats chose between responding on the 'collect' lever, resulting in reward on win trials, but a time penalty on loss trials, or starting a new trial. Rats showed a marked preference for the collect lever when both two and three lights were illuminated, indicating heightened reward expectancy following near-misses similar to wins. Erroneous collect responses were increased by amphetamine and the D(2) receptor agonist quinpirole, but not by the D(1) receptor agonist SKF 81297 or receptor subtype selective antagonists. These data suggest that dopamine modulates reward expectancy following the experience of almost winning during slot machine play, via activity at D(2) receptors, and this may result in an enhancement of the near-miss effect and facilitate further gambling.

Agreement Between Institutional Measurements and Treatment Planning System Calculations for Basic Dosimetric Parameters as Measured by the Imaging and Radiation Oncology Core-Houston

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerns, James R.; Followill, David S.; Imaging and Radiation Oncology Core-Houston, The University of Texas Health Science Center-Houston, Houston, Texas

Purpose: To compare radiation machine measurement data collected by the Imaging and Radiation Oncology Core at Houston (IROC-H) with institutional treatment planning system (TPS) values, to identify parameters with large differences in agreement; the findings will help institutions focus their efforts to improve the accuracy of their TPS models. Methods and Materials: Between 2000 and 2014, IROC-H visited more than 250 institutions and conducted independent measurements of machine dosimetric data points, including percentage depth dose, output factors, off-axis factors, multileaf collimator small fields, and wedge data. We compared these data with the institutional TPS values for the same points bymore » energy, class, and parameter to identify differences and similarities using criteria involving both the medians and standard deviations for Varian linear accelerators. Distributions of differences between machine measurements and institutional TPS values were generated for basic dosimetric parameters. Results: On average, intensity modulated radiation therapy–style and stereotactic body radiation therapy–style output factors and upper physical wedge output factors were the most problematic. Percentage depth dose, jaw output factors, and enhanced dynamic wedge output factors agreed best between the IROC-H measurements and the TPS values. Although small differences were shown between 2 common TPS systems, neither was superior to the other. Parameter agreement was constant over time from 2000 to 2014. Conclusions: Differences in basic dosimetric parameters between machine measurements and TPS values vary widely depending on the parameter, although agreement does not seem to vary by TPS and has not changed over time. Intensity modulated radiation therapy–style output factors, stereotactic body radiation therapy–style output factors, and upper physical wedge output factors had the largest disagreement and should be carefully modeled to ensure accuracy.« less

A study of machine-learning-based approaches to extract clinical entities and their assertions from discharge summaries.

PubMed

Jiang, Min; Chen, Yukun; Liu, Mei; Rosenbloom, S Trent; Mani, Subramani; Denny, Joshua C; Xu, Hua

2011-01-01

The authors' goal was to develop and evaluate machine-learning-based approaches to extracting clinical entities-including medical problems, tests, and treatments, as well as their asserted status-from hospital discharge summaries written using natural language. This project was part of the 2010 Center of Informatics for Integrating Biology and the Bedside/Veterans Affairs (VA) natural-language-processing challenge. The authors implemented a machine-learning-based named entity recognition system for clinical text and systematically evaluated the contributions of different types of features and ML algorithms, using a training corpus of 349 annotated notes. Based on the results from training data, the authors developed a novel hybrid clinical entity extraction system, which integrated heuristic rule-based modules with the ML-base named entity recognition module. The authors applied the hybrid system to the concept extraction and assertion classification tasks in the challenge and evaluated its performance using a test data set with 477 annotated notes. Standard measures including precision, recall, and F-measure were calculated using the evaluation script provided by the Center of Informatics for Integrating Biology and the Bedside/VA challenge organizers. The overall performance for all three types of clinical entities and all six types of assertions across 477 annotated notes were considered as the primary metric in the challenge. Systematic evaluation on the training set showed that Conditional Random Fields outperformed Support Vector Machines, and semantic information from existing natural-language-processing systems largely improved performance, although contributions from different types of features varied. The authors' hybrid entity extraction system achieved a maximum overall F-score of 0.8391 for concept extraction (ranked second) and 0.9313 for assertion classification (ranked fourth, but not statistically different than the first three systems) on the test data set in the challenge.

Machine Vision For Industrial Control:The Unsung Opportunity

NASA Astrophysics Data System (ADS)

Falkman, Gerald A.; Murray, Lawrence A.; Cooper, James E.

1984-05-01

Vision modules have primarily been developed to relieve those pressures newly brought into existence by Inspection (QUALITY) and Robotic (PRODUCTIVITY) mandates. Industrial Control pressure stems on the other hand from the older first industrial revolution mandate of throughput. Satisfying such pressure calls for speed in both imaging and decision making. Vision companies have, however, put speed on a backburner or ignore it entirely because most modules are computer/software based which limits their speed potential. Increasingly, the keynote being struck at machine vision seminars is that "Visual and Computational Speed Must Be Increased and Dramatically!" There are modular hardwired-logic systems that are fast but, all too often, they are not very bright. Such units: Measure the fill factor of bottles as they spin by, Read labels on cans, Count stacked plastic cups or Monitor the width of parts streaming past the camera. Many are only a bit more complex than a photodetector. Once in place, most of these units are incapable of simple upgrading to a new task and are Vision's analog to the robot industry's pick and place (RIA TYPE E) robot. Vision thus finds itself amidst the same quandries that once beset the Robot Industry of America when it tried to define a robot, excluded dumb ones, and was left with only slow machines whose unit volume potential is shatteringly low. This paper develops an approach to meeting the need of a vision system that cuts a swath into the terra incognita of intelligent, high-speed vision processing. Main attention is directed to vision for industrial control. Some presently untapped vision application areas that will be serviced include: Electronics, Food, Sports, Pharmaceuticals, Machine Tools and Arc Welding.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernandes, Ana; Pereira, Rita C.; Sousa, Jorge

The Instituto de Plasmas e Fusao Nuclear (IPFN) has developed dedicated re-configurable modules based on field programmable gate array (FPGA) devices for several nuclear fusion machines worldwide. Moreover, new Advanced Telecommunication Computing Architecture (ATCA) based modules developed by IPFN are already included in the ITER catalogue. One of the requirements for re-configurable modules operating in future nuclear environments including ITER is the remote update capability. Accordingly, this work presents an alternative method for FPGA remote programing to be implemented in new ATCA based re-configurable modules. FPGAs are volatile devices and their programming code is usually stored in dedicated flash memoriesmore » for properly configuration during module power-on. The presented method is capable to store new FPGA codes in Serial Peripheral Interface (SPI) flash memories using the PCIexpress (PCIe) network established on the ATCA back-plane, linking data acquisition endpoints and the data switch blades. The method is based on the Xilinx Quick Boot application note, adapted to PCIe protocol and ATCA based modules. (authors)« less

Decoupled Modulation Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Shaobu; Huang, Renke; Huang, Zhenyu

The objective of this research work is to develop decoupled modulation control methods for damping inter-area oscillations with low frequencies, so the damping control can be more effective and easier to design with less interference among different oscillation modes in the power system. A signal-decoupling algorithm was developed that can enable separation of multiple oscillation frequency contents and extraction of a “pure” oscillation frequency mode that are fed into Power System Stabilizers (PSSs) as the modulation input signals. As a result, instead of introducing interferences between different oscillation modes from the traditional approaches, the output of the new PSS modulationmore » control signal mainly affects only one oscillation mode of interest. The new decoupled modulation damping control algorithm has been successfully developed and tested on the standard IEEE 4-machine 2-area test system and a minniWECC system. The results are compared against traditional modulation controls, which demonstrates the validity and effectiveness of the newly-developed decoupled modulation damping control algorithm.« less

Laser Induced Damage of Potassium Dihydrogen Phosphate (KDP) Optical Crystal Machined by Water Dissolution Ultra-Precision Polishing Method

PubMed Central

Gao, Hang; Wang, Xu; Guo, Dongming; Liu, Ziyuan

2018-01-01

Laser induced damage threshold (LIDT) is an important optical indicator for nonlinear Potassium Dihydrogen Phosphate (KDP) crystal used in high power laser systems. In this study, KDP optical crystals are initially machined with single point diamond turning (SPDT), followed by water dissolution ultra-precision polishing (WDUP) and then tested with 355 nm nanosecond pulsed-lasers. Power spectral density (PSD) analysis shows that WDUP process eliminates the laser-detrimental spatial frequencies band of micro-waviness on SPDT machined surface and consequently decreases its modulation effect on the laser beams. The laser test results show that LIDT of WDUP machined crystal improves and its stability has a significant increase by 72.1% compared with that of SPDT. Moreover, a subsequent ultrasonic assisted solvent cleaning process is suggested to have a positive effect on the laser performance of machined KDP crystal. Damage crater investigation indicates that the damage morphologies exhibit highly thermal explosion features of melted cores and brittle fractures of periphery material, which can be described with the classic thermal explosion model. The comparison result demonstrates that damage mechanisms for SPDT and WDUP machined crystal are the same and WDUP process reveals the real bulk laser resistance of KDP optical crystal by removing the micro-waviness and subsurface damage on SPDT machined surface. This improvement of WDUP method makes the LIDT more accurate and will be beneficial to the laser performance of KDP crystal. PMID:29534032

What can alienation theory contribute to an understanding of social inequalities in health?

PubMed

Crinson, Iain; Yuill, Chris

2008-01-01

This article examines both the contribution and the limitations of research that has sought to develop a causal understanding of the psychosocial dimension of inequalities in health. The article seeks to revive interest in Marx's theory of alienation in developing the case for an alternative materialist conceptualization that is able to postulate the pathways from alienation as a psychosocial generative structure to social inequalities in health outcomes within late modern societies.

Advice Networks and Local Diffusion of Technological Innovations

NASA Astrophysics Data System (ADS)

Barahona, Juan Carlos; Pentland, Alex Sandy

Classical writers such as John Stuart Mill and Karl Marx speculated that the standard of living could not rise indefinitely unless advances in technology increased the yield of the means of production. Neoclassical growth theory, based on capital accumulation, supports this intuition [1]. Digital tools increase personal productivity. Communication technologies enhance the coordination among individuals and increase the efficacy and efficiency of collective efforts. In both ways, technology contributes with wealth creation and the overall welfare of the community.

Federal Republic of Germany, A Country Study.

DTIC Science & Technology

1982-02-01

pride. The works of Martin Luther, Immanuel Kant, Ludwig van Beethoven, Johann Wolfgang von Goethe, Karl Marx, Sigmund Freud, and Albert Einstein may...alliance between the Old Army and the republic and provided impetus for political radicalization. Wolfgang Kapp’s right-wing coup was aborted by the...the republic’s name evoked memories of Weimar’s native son and German literary giant, Johann Wolfgang von Goe- the, and of the nation’s humanistic

Translations on Eastern Europe, Political, Sociological, and Military Affairs, Number 1435

DTIC Science & Technology

1977-08-23

4 . K. Marx/F. Engels, "Werke" (Works), Vol 4 , Berlin, 1959, p 479. 5 . Cf. PRAVDA, Moscow, 9 October 1976. 6. Ibid. 45 7... live there, i.a., in the 35,000 newly built apartments. The new district is divided into three viable housing areas, with the main center being...biggest tenement houses of the world. 4 ®) In addition to new construction of housing, great attention must therefore be devoted to the

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2016-10-01

Behavioral and Cognitive Therapy 50th Annual Meeting. New York, NY. Black, S. K., Erb, S. Green, J. D., Bovin, M., Sloan, D. M., & Marx, B. (November...reactivity and regulation in PTSD; Chair: K. McHugh) at the Association for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Black, S. K...comparison of OIF deployment phases. Poster presented at the Association for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL

Control of Morphology of Crystallizable Polymer Mixtures via Manipulation of the Heterogeneous Melt

DTIC Science & Technology

1990-11-09

Distribution of Matrix Homopolymer C.V. Berney in Block Copolymers of Spherical P. Cheng Morphology R.E. Cohen 2. Distribution of Chain Ends Inside P. Cheng...the Polybutadiene Microspheres of SB C.V. Berney Diblock Copolymers R.E. Cohen 3. Spatial Organization of Homopolymer P. Cheng Chains Inside Spherical...Polybutadiene C.V. Berney Domains of SB Diblock Copolymers R.E. Cohen 4. Blends of Crystallizable Polybutadienes M. Marx R.E. Cohen 5. Synthesis and

Operational Characteristics of a High Voltage Dense Plasma Focus.

DTIC Science & Technology

1985-11-01

A high voltage dense plasma focus powered by a single-stage Marx bank was designed, built and operated. The maximum bank parameters are: voltage--120...kV, energy--20 kJ, short-circuit current--600kA. The bank impedance is about 200 millohms. The plasma focus center electrode diameter is 1.27 cm. The...about 50 milliohms. The context of this work is established with a review of previous plasma focus theoretical, experimental and computational work and

Contemporary Cuban Physics Through Scientific Publications: An Insider’s View

NASA Astrophysics Data System (ADS)

Altshuler, Ernesto

In a previous paper, the author reached some conclusions on the tendencies of the publications by Cuban physicists in international journals (Altshuler, Rev Cub Fís 22(2):173-182, 2005) and called for a systematic bibliometric study of the subject. Such a study has now been undertaken (a contribution to this volume entitled "Physics in Cuba from the Perspective of Bibliometrics" by Werner Marx and Manuel Cardona, referred to in this paper as Marx and Cardona) and supports the main conclusions of the former work. The scenario of Cuban physics since 1995 has been conditioned by two main facts interacting in a nontrivial way: the serious material shortages affecting local physics laboratories and bibliographic resources, and an increase in the country's international collaboration. As a positive result, the total volume of Cuban publications in international physics journals has increased since 1995, perhaps reaching a peak around the year 2000, while the number of citations of Cuban papers and the impact of the journals in which they were published have continued to increase since the mid-1990s. Theoretical work produced by physicists from a number of Cuban institutions in international collaborations strongly contribute to those numbers. In the last years, international publications suggest a `self-organized' opening of Cuban physics towards interdisciplinary subjects, which is increasing the `bibliometric visibility' of autochthonous experimental work.

Coiled transmission line pulse generators

DOEpatents

McDonald, Kenneth Fox

2010-11-09

Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

Linear Transformer Drivers for Z-pinch Based Propulsion

NASA Technical Reports Server (NTRS)

Adams, Robert; Seidler, William; Giddens, Patrick; Fabisinski, Leo; Cassibry, Jason

2017-01-01

The MSFC/UAH team has been developing of a novel power management and distribution system called a Linear Transformer Driver (LTD). LTD's hold the promise of dramatically reducing the required mass to drive a z-pinch by replacing the capacitor banks which constitute half the mass of the entire system. The MSFC?UAH tea, is developing this technology in hope of integrating it with the Pulsed Fission Fusion (PuFF) propulsion concept. High-Voltage pulsed power systems used for Z-Pinch experimentation have in the past largely been based on Marx Generators. Marx generators deliver the voltage and current required for the Z-Pinch, but suffer from two significant drawbacks when applied to a flight system: they are very massive, consisting of high-voltage capacitor banks insulated in oil-filled tanks and they do not lend themselves to rapid pulsing. The overall goal of Phase 2 is to demonstrate the construction of a higher voltage stack from a number of cavities each of the design proven in Phase 1 and to characterize and understand the techniques for designing the stack. The overall goal of Phase 3 is to demonstrate the feasibility of constructing a higher energy cavity from a number of smaller LTD stacks, to characterize and understand the way in which the constituent stacks combine, and to extend this demonstration LTD to serve as the basis for a 64 kJ pulse generator for Z-Pinch experiments.

Microtube strip heat exchanger

NASA Astrophysics Data System (ADS)

Doty, F. D.

1991-07-01

During the last quarter, Doty Scientific, Inc. (DSI) continued to make progress on the microtube strip (MTS) heat exchanger. The DSI completed a heat exchanger stress analysis of the ten-module heat exchanger bank; and performed a shell-side flow inhomogeneity analysis of the three-module heat exchanger bank. The company produced 50 tubestrips using an in-house CNC milling machine and began pressing them onto tube arrays. The DSI revised some of the tooling required to encapsulate a tube array and press tubestrips into the array to improve some of the prototype tooling.

FUZZY LOGIC BASED INTELLIGENT CONTROL OF A VARIABLE SPEED CAGE MACHINE WIND GENERATION SYSTEM

EPA Science Inventory

The paper describes a variable-speed wind generation system where fuzzy logic principles are used to optimize efficiency and enhance performance control. A squirrel cage induction generator feeds the power to a double-sided pulse width modulated converter system which either pump...

FUZZY LOGIC BASED INTELLIGENT CONTROL OF A VARIABLE SPEED CAGE MACHINE WIND GENERATION SYSTEM

EPA Science Inventory

The report gives results of a demonstration of the successful application of fuzzy logic to enhance the performance and control of a variable-speed wind generation system. A squirrel cage induction generator feeds the power to either a double-sided pulse-width modulation converte...

Multiple Learning Strategies Project. Small Engine Repair. Visually Impaired.

ERIC Educational Resources Information Center

Foster, Don; And Others

This instructional package designed for visually impaired students, focuses on the vocational area of small engine repair. Contained in this document are forty learning modules organized into fourteen units: engine block; starters; fuel tank, lines, filters and pumps; carburetors; electrical; test equipment; motorcycle; machining; tune-ups; short…

Structures, Design and Test: Materials

NASA Technical Reports Server (NTRS)

2004-01-01

NASA Marshall has developed a technology that combines a film/adhesive laydown module with fiber placement technology to enable the processing of composite prepreg tow/tape and films, foils, or adhesives on the same placement machine. The deve!opment of this technology grew out of NASA's need for lightweight, permeation-resistant cryogenic propellant tanks.

Annual report, October 1, 1978-September 30, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-03-01

This report covers the following areas: (1) PLT, (2) PDX, (3) smaller devices, (4) TFTR, (5) TFTR blanket module experiments, (6) engineering, (7) machine design and fabrication, and (8) advanced projects design and analysis, (9) design studies for new devices, (10) theory, (11) administration, and (12) graduate education. (MOW)

Why Fantasy Matters Too Much

ERIC Educational Resources Information Center

Zipes, Jack

2009-01-01

People speculate with the fantastic. Fantasy is a celebrity and money-making machine. As a module in people's brains, it has the capacity to transform plain junk into gold that glitters. Fantasy mobilizes and instrumentalizes the fantastic to form and celebrate spectacles that exist and have always existed--illusions of social relations of…

A Software Architecture for Adaptive Modular Sensing Systems

PubMed Central

Lyle, Andrew C.; Naish, Michael D.

2010-01-01

By combining a number of simple transducer modules, an arbitrarily complex sensing system may be produced to accommodate a wide range of applications. This work outlines a novel software architecture and knowledge representation scheme that has been developed to support this type of flexible and reconfigurable modular sensing system. Template algorithms are used to embed intelligence within each module. As modules are added or removed, the composite sensor is able to automatically determine its overall geometry and assume an appropriate collective identity. A virtual machine-based middleware layer runs on top of a real-time operating system with a pre-emptive kernel, enabling platform-independent template algorithms to be written once and run on any module, irrespective of its underlying hardware architecture. Applications that may benefit from easily reconfigurable modular sensing systems include flexible inspection, mobile robotics, surveillance, and space exploration. PMID:22163614

A software architecture for adaptive modular sensing systems.

PubMed

Lyle, Andrew C; Naish, Michael D

2010-01-01

By combining a number of simple transducer modules, an arbitrarily complex sensing system may be produced to accommodate a wide range of applications. This work outlines a novel software architecture and knowledge representation scheme that has been developed to support this type of flexible and reconfigurable modular sensing system. Template algorithms are used to embed intelligence within each module. As modules are added or removed, the composite sensor is able to automatically determine its overall geometry and assume an appropriate collective identity. A virtual machine-based middleware layer runs on top of a real-time operating system with a pre-emptive kernel, enabling platform-independent template algorithms to be written once and run on any module, irrespective of its underlying hardware architecture. Applications that may benefit from easily reconfigurable modular sensing systems include flexible inspection, mobile robotics, surveillance, and space exploration.

A Note on Compiling Fortran

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busby, L. E.

Fortran modules tend to serialize compilation of large Fortran projects, by introducing dependencies among the source files. If file A depends on file B, (A uses a module defined by B), you must finish compiling B before you can begin compiling A. Some Fortran compilers (Intel ifort, GNU gfortran and IBM xlf, at least) offer an option to ‘‘verify syntax’’, with the side effect of also producing any associated Fortran module files. As it happens, this option usually runs much faster than the object code generation and optimization phases. For some projects on some machines, it can be advantageous tomore » compile in two passes: The first pass generates the module files, quickly; the second pass produces the object files, in parallel. We achieve a 3.8× speedup in the case study below.« less

Agents, Bayes, and Climatic Risks - a modular modelling approach

NASA Astrophysics Data System (ADS)

Haas, A.; Jaeger, C.

2005-08-01

When insurance firms, energy companies, governments, NGOs, and other agents strive to manage climatic risks, it is by no way clear what the aggregate outcome should and will be. As a framework for investigating this subject, we present the LAGOM model family. It is based on modules depicting learning social agents. For managing climate risks, our agents use second order probabilities and update them by means of a Bayesian mechanism while differing in priors and risk aversion. The interactions between these modules and the aggregate outcomes of their actions are implemented using further modules. The software system is implemented as a series of parallel processes using the CIAMn approach. It is possible to couple modules irrespective of the language they are written in, the operating system under which they are run, and the physical location of the machine.

AstroCloud, a Cyber-Infrastructure for Astronomy Research: Data Access and Interoperability

NASA Astrophysics Data System (ADS)

Fan, D.; He, B.; Xiao, J.; Li, S.; Li, C.; Cui, C.; Yu, C.; Hong, Z.; Yin, S.; Wang, C.; Cao, Z.; Fan, Y.; Mi, L.; Wan, W.; Wang, J.

2015-09-01

Data access and interoperability module connects the observation proposals, data, virtual machines and software. According to the unique identifier of PI (principal investigator), an email address or an internal ID, data can be collected by PI's proposals, or by the search interfaces, e.g. conesearch. Files associated with the searched results could be easily transported to cloud storages, including the storage with virtual machines, or several commercial platforms like Dropbox. Benefitted from the standards of IVOA (International Observatories Alliance), VOTable formatted searching result could be sent to kinds of VO software. Latter endeavor will try to integrate more data and connect archives and some other astronomical resources.

Knowledge-based machine vision systems for space station automation

NASA Technical Reports Server (NTRS)

Ranganath, Heggere S.; Chipman, Laure J.

1989-01-01

Computer vision techniques which have the potential for use on the space station and related applications are assessed. A knowledge-based vision system (expert vision system) and the development of a demonstration system for it are described. This system implements some of the capabilities that would be necessary in a machine vision system for the robot arm of the laboratory module in the space station. A Perceptics 9200e image processor, on a host VAXstation, was used to develop the demonstration system. In order to use realistic test images, photographs of actual space shuttle simulator panels were used. The system's capabilities of scene identification and scene matching are discussed.

Digital fabrication of multi-material biomedical objects.

PubMed

Cheung, H H; Choi, S H

2009-12-01

This paper describes a multi-material virtual prototyping (MMVP) system for modelling and digital fabrication of discrete and functionally graded multi-material objects for biomedical applications. The MMVP system consists of a DMMVP module, an FGMVP module and a virtual reality (VR) simulation module. The DMMVP module is used to model discrete multi-material (DMM) objects, while the FGMVP module is for functionally graded multi-material (FGM) objects. The VR simulation module integrates these two modules to perform digital fabrication of multi-material objects, which can be subsequently visualized and analysed in a virtual environment to optimize MMLM processes for fabrication of product prototypes. Using the MMVP system, two biomedical objects, including a DMM human spine and an FGM intervertebral disc spacer are modelled and digitally fabricated for visualization and analysis in a VR environment. These studies show that the MMVP system is a practical tool for modelling, visualization, and subsequent fabrication of biomedical objects of discrete and functionally graded multi-materials for biomedical applications. The system may be adapted to control MMLM machines with appropriate hardware for physical fabrication of biomedical objects.

Applying Workspace Limitations in a Velocity-Controlled Robotic Mechanism

NASA Technical Reports Server (NTRS)

Abdallah, Muhammad E. (Inventor); Hargrave, Brian (Inventor); Platt, Robert J., Jr. (Inventor)

2014-01-01

A robotic system includes a robotic mechanism responsive to velocity control signals, and a permissible workspace defined by a convex-polygon boundary. A host machine determines a position of a reference point on the mechanism with respect to the boundary, and includes an algorithm for enforcing the boundary by automatically shaping the velocity control signals as a function of the position, thereby providing smooth and unperturbed operation of the mechanism along the edges and corners of the boundary. The algorithm is suited for application with higher speeds and/or external forces. A host machine includes an algorithm for enforcing the boundary by shaping the velocity control signals as a function of the reference point position, and a hardware module for executing the algorithm. A method for enforcing the convex-polygon boundary is also provided that shapes a velocity control signal via a host machine as a function of the reference point position.

Army-NASA aircrew/aircraft integration program: Phase 4 A(3)I Man-Machine Integration Design and Analysis System (MIDAS) software detailed design document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Constantine, Betsy; Murray, Jerry; Neukom, Christian; Prevost, Michael; Shankar, Renuka; Staveland, Lowell

1991-01-01

The Man-Machine Integration Design and Analysis System (MIDAS) is an integrated suite of software components that constitutes a prototype workstation to aid designers in applying human factors principles to the design of complex human-machine systems. MIDAS is intended to be used at the very early stages of conceptual design to provide an environment wherein designers can use computational representations of the crew station and operator, instead of hardware simulators and man-in-the-loop studies, to discover problems and ask 'what if' questions regarding the projected mission, equipment, and environment. This document is the Software Product Specification for MIDAS. Introductory descriptions of the processing requirements, hardware/software environment, structure, I/O, and control are given in the main body of the document for the overall MIDAS system, with detailed discussion of the individual modules included in Annexes A-J.

A Wireless 32-Channel Implantable Bidirectional Brain Machine Interface

PubMed Central

Su, Yi; Routhu, Sudhamayee; Moon, Kee S.; Lee, Sung Q.; Youm, WooSub; Ozturk, Yusuf

2016-01-01

All neural information systems (NIS) rely on sensing neural activity to supply commands and control signals for computers, machines and a variety of prosthetic devices. Invasive systems achieve a high signal-to-noise ratio (SNR) by eliminating the volume conduction problems caused by tissue and bone. An implantable brain machine interface (BMI) using intracortical electrodes provides excellent detection of a broad range of frequency oscillatory activities through the placement of a sensor in direct contact with cortex. This paper introduces a compact-sized implantable wireless 32-channel bidirectional brain machine interface (BBMI) to be used with freely-moving primates. The system is designed to monitor brain sensorimotor rhythms and present current stimuli with a configurable duration, frequency and amplitude in real time to the brain based on the brain activity report. The battery is charged via a novel ultrasonic wireless power delivery module developed for efficient delivery of power into a deeply-implanted system. The system was successfully tested through bench tests and in vivo tests on a behaving primate to record the local field potential (LFP) oscillation and stimulate the target area at the same time. PMID:27669264

Architectures for intelligent machines

NASA Technical Reports Server (NTRS)

Saridis, George N.

1991-01-01

The theory of intelligent machines has been recently reformulated to incorporate new architectures that are using neural and Petri nets. The analytic functions of an intelligent machine are implemented by intelligent controls, using entropy as a measure. The resulting hierarchical control structure is based on the principle of increasing precision with decreasing intelligence. Each of the three levels of the intelligent control is using different architectures, in order to satisfy the requirements of the principle: the organization level is moduled after a Boltzmann machine for abstract reasoning, task planning and decision making; the coordination level is composed of a number of Petri net transducers supervised, for command exchange, by a dispatcher, which also serves as an interface to the organization level; the execution level, include the sensory, planning for navigation and control hardware which interacts one-to-one with the appropriate coordinators, while a VME bus provides a channel for database exchange among the several devices. This system is currently implemented on a robotic transporter, designed for space construction at the CIRSSE laboratories at the Rensselaer Polytechnic Institute. The progress of its development is reported.

Development and application of a novel crop stress and quality instrument

NASA Astrophysics Data System (ADS)

Huang, Wengjiang; Sun, Gang; Wang, Jihua; Liu, Liangyun; Zheng, Wengang

2005-12-01

In this paper, a portable diagnostic instrument for crop quality analysis was designed and tested, which can measure the normalized difference vegetation index (PRI) and structure insensitive pigment index (NRI) of crop canopy in the field. The instrument have a valid survey area of 1m×1m when the height between instrument and the ground was fixed to 1.3 meter. The crop quality can be assessed based on their PRI and NRI values, so it will be very important for crop management to get these values. The instrument uses sunlight as its light source. There are six special different photoelectrical detectors within red, blue and near infrared bands, which are used for detecting incidence sunlight and reflex light from the canopy of crop. This optical instrument includes photoelectric detector module, signal process and A/D convert module, the data storing and transmission module and human-machine interface module. The detector is the core of the instrument which measures the spectrums at special bands. The microprocessor calculates the NDVI and SIPI value based on the A/D value. And the value can be displayed on the instrument's LCD, stored in the flash memory of instrument and can also be uploaded to PC through the PC's RS232 serial interface. The prototype was tested in the crop field at different view directions. It reveals the on-site and non-sampling mode of crop growth monitoring by fixed on the agricultural machine traveling in the field. Such simple instruments can diagnose the plant growth status by the acquired spectral response.

Multipurpose EPR loop-gap resonator and cylindrical TE011 cavity for aqueous samples at 94 GHz.

PubMed

Sidabras, Jason W; Mett, Richard R; Froncisz, Wojciech; Camenisch, Theodore G; Anderson, James R; Hyde, James S

2007-03-01

A loop-gap resonator (LGR) and a cylindrical TE(011) cavity resonator for use at W band, 94 GHz, have been designed and characterized using the Ansoft (Pittsburgh, PA) high frequency structure simulator (HFSS; Version 10.0). Field modulation penetration was analyzed using Ansoft MAXWELL 3D (Version 11.0). Optimizing both resonators to the same sample sizes shows that EPR signal intensities of the LGR and TE(011) are similar. The 3 dB bandwidth of the LGR, on the order of 1 GHz, is a new advantage for high frequency experiments. Ultraprecision electric discharge machining (EDM) was used to fabricate the resonators from silver. The TE(011) cavity has slots that are cut into the body to allow penetration of 100 kHz field modulation. The resonator body is embedded in graphite, also cut by EDM techniques, for a combination of reasons that include (i) reduced microwave leakage and improved TE(011) mode purity, (ii) field modulation penetration, (iii) structural support for the cavity body, and (iv) machinability by EDM. Both resonators use a slotted iris. Variable coupling is provided by a three-stub tuning element. A collet system designed to hold sample tubes has been implemented, increasing repeatability of sample placement and reducing sample vibration noise. Initial results include multiquantum experiments up to 9Q using the LGR to examine 1 mM 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) in aqueous solution at room temperature and field modulation experiments using the TE(011) cavity to obtain an EPR spectrum of 1 microM TEMPO.

Local Hamiltonian Monte Carlo study of the massive schwinger model, the decoupling of heavy flavours

NASA Astrophysics Data System (ADS)

Ranft, J.

1983-12-01

The massive Schwinger model with two flavours is studied using the local hamiltonian lattice Monte Carlo method. Chiral symmetry breaking is studied using the fermion condensate as order parameter. For a small ratio of the two fermion masses, degeneracy of the two flavours is found. For a large ratio of the masses, the heavy flavour decouples and the light fermion behaves like in the one flavour Schwinger model. On leave from Sektion Physik, Karl-Marx-Universität, Leipzig, GDR.

Implications of Integrating Women into the Marine Corps Infantry

DTIC Science & Technology

2015-01-01

account by the research. 17 Guy L. Siebold, “The Essence of Military Group Cohesion,” Armed Forces and Society, Vol. 33, No. 2, January 1, 2007, pp...assignment of female personnel reveals a dearth of critical mass concepts: 24 Jasmin Joecks, Kerstin Pull, and Karin Vetter, “Gender Diversity in the...Personnel Psychology, Vol. 60, No. 2, 2007, pp. 303–335. 42 David M. Marx and Jasmin S. Roman, “Female Role Models: Protecting Women’s Math Test

6-7 Mev Characteristic Gamma-Ray Source Using A Plasma Opening Switch And A Marx Bank

DTIC Science & Technology

2011-06-01

of Hawk, including the POS, is shown in Fig. 2a. The POS consists of 12 plasma guns made from coaxial cables that inject ionized plasma radially...inward between two coaxial conductors prior to firing the generator. The POS plasma conducts the generator current as a short circuit for about 700...vacuum gap in the plasma . High-energy electron- and ion-beams form in the plasma -filled coaxial region, with ions from the plasma and the polyethylene

Himmelsfotografie MIT Schmidt-Teleskopen

NASA Astrophysics Data System (ADS)

Marx, Siegfried; Pfau, Werner

Auf dem Höhepunkt der Verbreitung und astronomischen Anwendung von Schmidt-Teleskopen legen S. Marx und W. Pfau einen reich illustrierten Bildband zu diesem Fernrohrtyp vor. Der thematische Bogen reicht von der Teleskoptechnik und ihrer Geschichte über das Leben von Berhard Schmidt bis zu den schönsten, hier in hervorragender Qualität wiedergegebenen Himmelsaufnahmen und ihrer wissenschaftlichen Interpretation. Praktische Hinweise zu eigener fotografischer Tätigkeit und ein Glossar machen das Buch nützlich für jeden Liebhaber der Himmelskunde.

European Science Notes Information Bulletin Report on Current European/ Middle Eastern Science

DTIC Science & Technology

1990-08-01

evolved from pulse- power research activities generators charged by low-inductance, Marx-bank dating from the early 1960s at the Institute of Nuclear...Pulse Power at ISE tion rates up to 25 Hz. While I saw one of these gener- ators at ISE hooked to a microwave generator and The ISE has a very active ...program on repetitive pulse photographs for a commercial brochure, I have not seen power based upon oil-dielectric transformer technology, the output

Present and Future Security Challenges in Northern Europe

DTIC Science & Technology

2002-04-09

mixture of Kant, Hegel, Bentham, Spencer and Nietzsche , with Marx conveniently left out of the mix, portended the elimination of time and space and the...unthreatened, turn "Nelson’s Eye" toward Northern Europe’s plight? NATO’s Article V (the mutual defense clause) is not viable without a "Firm Sea Power...first article , he asserts that professional armies should be abolished. Today, they are being re-introduced throughout Europe. In his fourth article , he

A Service in Transition: Forging an Integrated Institutional Identity for the United States Air Force

DTIC Science & Technology

2010-06-01

Jr (Bomber) o Seventh Air Force, LTG Jeffrey A. Remington (Fighter) o Eleventh Air Force, LTG Dana T. Atkins (Fighter) o Thirteenth Air Force, LTG...Acculturation.‖ In Handbook of Socialization: Theory and Research, edited by Joan E. Grusec, and Paul D. Hastings, 543-560. New York, NY: Guilford...Philip. ―Determinism and Indeterminacy in the History of Technology.‖ In Does Technology Drive History?, edited by Merritt Roe Smith, and Leo Marx

A Chip in the Curtain: Computer Technology in the Soviet Union

DTIC Science & Technology

1989-03-01

authority of the tsar. British historian Lionel Kochan recounted some of the rather complicated story of religion and the tsars: The Church, because of... pseudosciences " and their study was forbidden. Stalin’s policy delayed the development of a scientific and academic foundation for the study of the computer in...leaders, the doctrine of Marx and Lenin is a matter of faith comparable to a religion in Western terms. When the General Secretary of the Soviet Union

China Report, Red Flag, No. 8, 16 April 1983

DTIC Science & Technology

1983-07-01

teachers in our country rank very low in both their pay and social position. So, no one is willing to be a pri- mary school teacher. Unqualified ...man’s knowledge of natural laws brings with it increases in man’s means to exert an effect on the natural world." ("Collected Works of Marx and Engels...the wealth of human knowledge and the new knowledge and fruits of contemporary science and culture. Freedom cannot be 11 attained until the law of

A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

The purpose of this program is to demonstrate the technical readiness of a cost effective process sequence that has the potential for the production of flat plate photovoltaic modules which met the price goal in 1986 of $.70 or less per watt peak. Program efforts included: preliminary design review, preliminary cell fabrication using the proposed process sequence, verification of sandblasting back cleanup, study of resist parameters, evaluation of pull strength of the proposed metallization, measurement of contact resistance of Electroless Ni contacts, optimization of process parameter, design of the MEPSDU module, identification and testing of insulator tapes, development of a lamination process sequence, identification, discussions, demonstrations and visits with candidate equipment vendors, evaluation of proposals for tabbing and stringing machine.

Identifying interactions between chemical entities in biomedical text.

PubMed

Lamurias, Andre; Ferreira, João D; Couto, Francisco M

2014-10-23

Interactions between chemical compounds described in biomedical text can be of great importance to drug discovery and design, as well as pharmacovigilance. We developed a novel system, \\"Identifying Interactions between Chemical Entities\\" (IICE), to identify chemical interactions described in text. Kernel-based Support Vector Machines first identify the interactions and then an ensemble classifier validates and classifies the type of each interaction. This relation extraction module was evaluated with the corpus released for the DDI Extraction task of SemEval 2013, obtaining results comparable to state-of-the-art methods for this type of task. We integrated this module with our chemical named entity recognition module and made the whole system available as a web tool at www.lasige.di.fc.ul.pt/webtools/iice.

Identifying interactions between chemical entities in biomedical text.

PubMed

Lamurias, Andre; Ferreira, João D; Couto, Francisco M

2014-12-01

Interactions between chemical compounds described in biomedical text can be of great importance to drug discovery and design, as well as pharmacovigilance. We developed a novel system, "Identifying Interactions between Chemical Entities" (IICE), to identify chemical interactions described in text. Kernel-based Support Vector Machines first identify the interactions and then an ensemble classifier validates and classifies the type of each interaction. This relation extraction module was evaluated with the corpus released for the DDI Extraction task of SemEval 2013, obtaining results comparable to stateof- the-art methods for this type of task. We integrated this module with our chemical named entity recognition module and made the whole system available as a web tool at www.lasige.di.fc.ul.pt/webtools/iice.

An fMRI and effective connectivity study investigating miss errors during advice utilization from human and machine agents.

PubMed

Goodyear, Kimberly; Parasuraman, Raja; Chernyak, Sergey; de Visser, Ewart; Madhavan, Poornima; Deshpande, Gopikrishna; Krueger, Frank

2017-10-01

As society becomes more reliant on machines and automation, understanding how people utilize advice is a necessary endeavor. Our objective was to reveal the underlying neural associations during advice utilization from expert human and machine agents with fMRI and multivariate Granger causality analysis. During an X-ray luggage-screening task, participants accepted or rejected good or bad advice from either the human or machine agent framed as experts with manipulated reliability (high miss rate). We showed that the machine-agent group decreased their advice utilization compared to the human-agent group and these differences in behaviors during advice utilization could be accounted for by high expectations of reliable advice and changes in attention allocation due to miss errors. Brain areas involved with the salience and mentalizing networks, as well as sensory processing involved with attention, were recruited during the task and the advice utilization network consisted of attentional modulation of sensory information with the lingual gyrus as the driver during the decision phase and the fusiform gyrus as the driver during the feedback phase. Our findings expand on the existing literature by showing that misses degrade advice utilization, which is represented in a neural network involving salience detection and self-processing with perceptual integration.

SLURM: Simple Linux Utility for Resource Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jette, M; Grondona, M

2002-12-19

Simple Linux Utility for Resource Management (SLURM) is an open source, fault-tolerant, and highly scalable cluster management and job scheduling system for Linux clusters of thousands of nodes. Components include machine status, partition management, job management, scheduling and stream copy modules. This paper presents an overview of the SLURM architecture and functionality.

SLURM: Simplex Linux Utility for Resource Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jette, M; Grondona, M

2003-04-22

Simple Linux Utility for Resource Management (SLURM) is an open source, fault-tolerant, and highly scalable cluster management and job scheduling system for Linux clusters of thousands of nodes. Components include machine status, partition management, job management, scheduling, and stream copy modules. This paper presents an overview of the SLURM architecture and functionality.

Undergraduate Student Perceptions of the Use of Ultrasonography in the Study of "Living Anatomy"

ERIC Educational Resources Information Center

Ivanusic, Jason; Cowie, Brian; Barrington, Michael

2010-01-01

Ultrasonography is a noninvasive imaging modality, and modern ultrasound machines are portable, inexpensive (relative to other imaging modalities), and user friendly. The aim of this study was to explore student perceptions of the use of ultrasound to teach "living anatomy". A module utilizing transthoracic echocardiography was developed and…

Curricular Improvements through Computation and Experiment Based Learning Modules

ERIC Educational Resources Information Center

Khan, Fazeel; Singh, Kumar

2015-01-01

Engineers often need to predict how a part, mechanism or machine will perform in service, and this insight is typically achieved thorough computer simulations. Therefore, instruction in the creation and application of simulation models is essential for aspiring engineers. The purpose of this project was to develop a unified approach to teaching…

Machine Shop. Module 5: Lathes. Instructor's Guide.

ERIC Educational Resources Information Center

Nobles, Jack

This document consists of materials for a 10-unit course on the following topics: (1) types and parts of lathes; (2) lathe accessories, maintenance, and safety; (3) lathe operations and tooling; (4) lathe calculations; (5) lathe taper and thread applications; (6) planning considerations; (7) cutting fluids, lathe center alignment, and lathe gaps;…

Multiple Learning Strategies Project. Small Engine Repair Service. [Regular Vocational. Vol. 2.

ERIC Educational Resources Information Center

Pitts, Jim; And Others

This instructional package is one of two designed for use by regular vocational students in the vocational area of small engine repair service. Contained in this document are forty-nine learning modules organized into eleven units: test equipment; motorcycle; engine removal and replacement; machining; tune-ups; short blocks; storage; filling out…

Machine Shop. Module 7: Grinders. Instructor's Guide.

ERIC Educational Resources Information Center

Nobles, Jack; Gage, Mel

This document consists of materials for an eight-unit course on the following topics: (1) grinder safety and types of grinders; (2) surface grinder accessories and equipment maintenance; (3) surface grinder preparation and set-up; (4) surface grinding flat and angular surfaces; (5) cylindrical grinding; (6) tool and cutter safety; (7) tool and…

Hybrid three-dimensional and support vector machine approach for automatic vehicle tracking and classification using a single camera

NASA Astrophysics Data System (ADS)

Kachach, Redouane; Cañas, José María

2016-05-01

Using video in traffic monitoring is one of the most active research domains in the computer vision community. TrafficMonitor, a system that employs a hybrid approach for automatic vehicle tracking and classification on highways using a simple stationary calibrated camera, is presented. The proposed system consists of three modules: vehicle detection, vehicle tracking, and vehicle classification. Moving vehicles are detected by an enhanced Gaussian mixture model background estimation algorithm. The design includes a technique to resolve the occlusion problem by using a combination of two-dimensional proximity tracking algorithm and the Kanade-Lucas-Tomasi feature tracking algorithm. The last module classifies the shapes identified into five vehicle categories: motorcycle, car, van, bus, and truck by using three-dimensional templates and an algorithm based on histogram of oriented gradients and the support vector machine classifier. Several experiments have been performed using both real and simulated traffic in order to validate the system. The experiments were conducted on GRAM-RTM dataset and a proper real video dataset which is made publicly available as part of this work.

Microgripper construction kit

NASA Astrophysics Data System (ADS)

Gengenbach, Ulrich K.; Hofmann, Andreas; Engelhardt, Friedhelm; Scharnowell, Rudolf; Koehler, Bernd

2001-10-01

A large number of microgrippers has been developed in industry and academia. Although the importance of hybrid integration techniques and hence the demand for assembly tools grows continuously a large part of these developments has not yet been used in industrial production. The first grippers developed for microassembly were basically vacuum grippers and downscaled tweezers. Due to increasingly complex assembly tasks more and more functionality such as sensing or additional functions such as adhesive dispensing has been integrated into gripper systems over the last years. Most of these gripper systems are incompatible since there exists no standard interface to the assembly machine and no standard for the internal modules and interfaces. Thus these tools are not easily interchangeable between assembly machines and not easily adaptable to assembly tasks. In order to alleviate this situation a construction kit for modular microgrippers is being developed. It is composed of modules with well defined interfaces that can be combined to build task specific grippers. An abstract model of a microgripper is proposed as a tool to structure the development of the construction kit. The modular concept is illustrated with prototypes.

Modeling the Virtual Machine Launching Overhead under Fermicloud

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garzoglio, Gabriele; Wu, Hao; Ren, Shangping

FermiCloud is a private cloud developed by the Fermi National Accelerator Laboratory for scientific workflows. The Cloud Bursting module of the FermiCloud enables the FermiCloud, when more computational resources are needed, to automatically launch virtual machines to available resources such as public clouds. One of the main challenges in developing the cloud bursting module is to decide when and where to launch a VM so that all resources are most effectively and efficiently utilized and the system performance is optimized. However, based on FermiCloud’s system operational data, the VM launching overhead is not a constant. It varies with physical resourcemore » (CPU, memory, I/O device) utilization at the time when a VM is launched. Hence, to make judicious decisions as to when and where a VM should be launched, a VM launch overhead reference model is needed. The paper is to develop a VM launch overhead reference model based on operational data we have obtained on FermiCloud and uses the reference model to guide the cloud bursting process.« less

Silicon photonic Mach Zehnder modulators for next-generation short-reach optical communication networks

NASA Astrophysics Data System (ADS)

Lacava, C.; Liu, Z.; Thomson, D.; Ke, Li; Fedeli, J. M.; Richardson, D. J.; Reed, G. T.; Petropoulos, P.

2016-02-01

Communication traffic grows relentlessly in today's networks, and with ever more machines connected to the network, this trend is set to continue for the foreseeable future. It is widely accepted that increasingly faster communications are required at the point of the end users, and consequently optical transmission plays a progressively greater role even in short- and medium-reach networks. Silicon photonic technologies are becoming increasingly attractive for such networks, due to their potential for low cost, energetically efficient, high-speed optical components. A representative example is the silicon-based optical modulator, which has been actively studied. Researchers have demonstrated silicon modulators in different types of structures, such as ring resonators or slow light based devices. These approaches have shown remarkably good performance in terms of modulation efficiency, however their operation could be severely affected by temperature drifts or fabrication errors. Mach-Zehnder modulators (MZM), on the other hand, show good performance and resilience to different environmental conditions. In this paper we present a CMOS-compatible compact silicon MZM. We study the application of the modulator to short-reach interconnects by realizing data modulation using some relevant advanced modulation formats, such as 4-level Pulse Amplitude Modulation (PAM-4) and Discrete Multi-Tone (DMT) modulation and compare the performance of the different systems in transmission.

Irrelevance of the Power Stroke for the Directionality, Stopping Force, and Optimal Efficiency of Chemically Driven Molecular Machines

PubMed Central

Astumian, R. Dean

2015-01-01

A simple model for a chemically driven molecular walker shows that the elastic energy stored by the molecule and released during the conformational change known as the power-stroke (i.e., the free-energy difference between the pre- and post-power-stroke states) is irrelevant for determining the directionality, stopping force, and efficiency of the motor. Further, the apportionment of the dependence on the externally applied force between the forward and reverse rate constants of the power-stroke (or indeed among all rate constants) is irrelevant for determining the directionality, stopping force, and efficiency of the motor. Arguments based on the principle of microscopic reversibility demonstrate that this result is general for all chemically driven molecular machines, and even more broadly that the relative energies of the states of the motor have no role in determining the directionality, stopping force, or optimal efficiency of the machine. Instead, the directionality, stopping force, and optimal efficiency are determined solely by the relative heights of the energy barriers between the states. Molecular recognition—the ability of a molecular machine to discriminate between substrate and product depending on the state of the machine—is far more important for determining the intrinsic directionality and thermodynamics of chemo-mechanical coupling than are the details of the internal mechanical conformational motions of the machine. In contrast to the conclusions for chemical driving, a power-stroke is very important for the directionality and efficiency of light-driven molecular machines and for molecular machines driven by external modulation of thermodynamic parameters. PMID:25606678

Implementation of Bluetooth technology in processing aspheric mirrors

NASA Astrophysics Data System (ADS)

Chen, Dong-yun; Li, Xiao-jin

2010-10-01

This paper adopts the Bluetooth wireless transmission to replace the conducting rings currently using in the active lap process to overcome the cost and abrasion problems brought by the conducting rings, which has great significance for reducing the costs of processing large aspheric mirrors. Based on the actual application requirements, Article proposes the overall program of using Bluetooth technology as data transmission, including the active lap-side and machine tool-side: In the machine tool-side, the MCU separately connects with Bluetooth module and the sensor via UART0 and UART1 serial port, and when the MCU receives the signals sending from the sensor, the MCU packs and then sends them through the Bluetooth module; while in the active lap side, the CCAL reads-out the position signals of sensor detecting in dual-port memory via one-side ports, and the other side ports connect with the MCU's high ports P4-P7, so the MCU can unpacks and stores the position signals receiving via Bluetooth module. This paper designs and implements the system's hardware circuit, and mainly introduces the ways of serial and parallel. Based upon the realized system, design the test program for the Bluetooth wireless transmission and the experiment results, in the condition of the active lap processing large aspheric mirrors, showed that Bluetooth technology can meet the requirements of practical applications.

A Near-Infrared Spectrometer Based on Novel Grating Light Modulators

PubMed Central

Wei, Wei; Huang, Shanglian; Wang, Ning; Jin, Zhu; Zhang, Jie; Chen, Weimin

2009-01-01

A near-infrared spectrometer based on novel MOEMS grating light modulators is proposed. The spectrum detection method that combines a grating light modulator array with a single near-infrared detector has been applied. Firstly, optics theory has been used to analyze the essential principles of the proposed spectroscopic sensor. Secondly, the grating light modulators have been designed and fabricated by micro-machining technology. Finally, the principles of this spectroscopic sensor have been validated and its key parameters have been tested by experiments. The result shows that the spectral resolution is better than 10 nm, the wavelength deviation is less than 1 nm, the deviation of the intensity of peak wavelength is no more than 0.5%, the driving voltage of grating light modulators array device is below 25 V and the response frequency of it is about 5 kHz. With low cost, satisfactory precision, portability and other advantages, the spectrometer should find potential applications in food safety and quality monitoring, pharmaceutical identification and agriculture product quality classification. PMID:22574065

A near-infrared spectrometer based on novel grating light modulators.

PubMed

Wei, Wei; Huang, Shanglian; Wang, Ning; Jin, Zhu; Zhang, Jie; Chen, Weimin

2009-01-01

A near-infrared spectrometer based on novel MOEMS grating light modulators is proposed. The spectrum detection method that combines a grating light modulator array with a single near-infrared detector has been applied. Firstly, optics theory has been used to analyze the essential principles of the proposed spectroscopic sensor. Secondly, the grating light modulators have been designed and fabricated by micro-machining technology. Finally, the principles of this spectroscopic sensor have been validated and its key parameters have been tested by experiments. The result shows that the spectral resolution is better than 10 nm, the wavelength deviation is less than 1 nm, the deviation of the intensity of peak wavelength is no more than 0.5%, the driving voltage of grating light modulators array device is below 25 V and the response frequency of it is about 5 kHz. With low cost, satisfactory precision, portability and other advantages, the spectrometer should find potential applications in food safety and quality monitoring, pharmaceutical identification and agriculture product quality classification.

Joint OSNR monitoring and modulation format identification in digital coherent receivers using deep neural networks.

PubMed

Khan, Faisal Nadeem; Zhong, Kangping; Zhou, Xian; Al-Arashi, Waled Hussein; Yu, Changyuan; Lu, Chao; Lau, Alan Pak Tao

2017-07-24

We experimentally demonstrate the use of deep neural networks (DNNs) in combination with signals' amplitude histograms (AHs) for simultaneous optical signal-to-noise ratio (OSNR) monitoring and modulation format identification (MFI) in digital coherent receivers. The proposed technique automatically extracts OSNR and modulation format dependent features of AHs, obtained after constant modulus algorithm (CMA) equalization, and exploits them for the joint estimation of these parameters. Experimental results for 112 Gbps polarization-multiplexed (PM) quadrature phase-shift keying (QPSK), 112 Gbps PM 16 quadrature amplitude modulation (16-QAM), and 240 Gbps PM 64-QAM signals demonstrate OSNR monitoring with mean estimation errors of 1.2 dB, 0.4 dB, and 1 dB, respectively. Similarly, the results for MFI show 100% identification accuracy for all three modulation formats. The proposed technique applies deep machine learning algorithms inside standard digital coherent receiver and does not require any additional hardware. Therefore, it is attractive for cost-effective multi-parameter estimation in next-generation elastic optical networks (EONs).

Can Machines Think? Interaction and Perspective Taking with Robots Investigated via fMRI

PubMed Central

Krach, Sören; Hegel, Frank; Wrede, Britta; Sagerer, Gerhard; Binkofski, Ferdinand; Kircher, Tilo

2008-01-01

Background When our PC goes on strike again we tend to curse it as if it were a human being. Why and under which circumstances do we attribute human-like properties to machines? Although humans increasingly interact directly with machines it remains unclear whether humans implicitly attribute intentions to them and, if so, whether such interactions resemble human-human interactions on a neural level. In social cognitive neuroscience the ability to attribute intentions and desires to others is being referred to as having a Theory of Mind (ToM). With the present study we investigated whether an increase of human-likeness of interaction partners modulates the participants' ToM associated cortical activity. Methodology/Principal Findings By means of functional magnetic resonance imaging (subjects n = 20) we investigated cortical activity modulation during highly interactive human-robot game. Increasing degrees of human-likeness for the game partner were introduced by means of a computer partner, a functional robot, an anthropomorphic robot and a human partner. The classical iterated prisoner's dilemma game was applied as experimental task which allowed for an implicit detection of ToM associated cortical activity. During the experiment participants always played against a random sequence unknowingly to them. Irrespective of the surmised interaction partners' responses participants indicated having experienced more fun and competition in the interaction with increasing human-like features of their partners. Parametric modulation of the functional imaging data revealed a highly significant linear increase of cortical activity in the medial frontal cortex as well as in the right temporo-parietal junction in correspondence with the increase of human-likeness of the interaction partner (computer