Installation of ventilated facades without scaffolding in high-rise buildings

NASA Astrophysics Data System (ADS)

Gnedina, Lyubov; Muchkina, Arina; Labutin, Alexander

2018-03-01

This article consider the use of polystyrene concrete blocks during assembling enclosing structure of ventilated facades in high-rise monolithic housing construction. Comparing with traditional technology devices hinged ventilated facade the main advantage of the proposed design is an exception of using scaffold, that leads to a cheapening of the enclosing structure. Proposed solutions are confirmed by patents of the Russian Federation.

Optical Sensors Based on Plastic Fibers

PubMed Central

Bilro, Lúcia; Alberto, Nélia; Pinto, João L.; Nogueira, Rogério

2012-01-01

The recent advances of polymer technology allowed the introduction of plastic optical fiber in sensor design. The advantages of optical metrology with plastic optical fiber have attracted the attention of the scientific community, as they allow the development of low-cost or cost competitive systems compared with conventional technologies. In this paper, the current state of the art of plastic optical fiber technology will be reviewed, namely its main characteristics and sensing advantages. Several measurement techniques will be described, with a strong focus on interrogation approaches based on intensity variation in transmission and reflection. The potential applications involving structural health monitoring, medicine, environment and the biological and chemical area are also presented. PMID:23112707

Comparison of Phenoldisulfonic Acid, Nondispersive Infrared, and Saltzman methods for the determination of oxides of nitrogen in automotive exhaust

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, G.E.; Huls, T.A.

1970-10-01

The Saltzman, Phenoldisulfonic Acid and Nondispersive Infrared methods have been compared for the determination of oxides of nitrogen in automobile exhaust. The main purpose of this investigation was to determine whether the Nondispersive Infrared method could be used as a possible replacement for the Saltzman method. Results show that the Nondispersive Infrared analyzer can be used to measure NO/sub x/ in exhaust gases with advantages over both the Saltzman and Phenoldisulfonic Acid methods. These advantages include simplicity, speed, less complicated analytical technique, and the fact that it is better adapted to be carried out by technicians at the test site.

Comparing temporal trends of organochlorines in guillemot eggs and Baltic herring: advantages and disadvantage for selecting sentinel species for environmental monitoring.

PubMed

Miller, Aroha; Nyberg, Elisabeth; Danielsson, Sara; Faxneld, Suzanne; Haglund, Peter; Bignert, Anders

2014-09-01

Within Europe, the Marine Strategy Framework Directive (MSFD) is aimed at addressing the chemical status and quality of the marine environment. One of the main goals is to achieve Good Environmental Status (GES) in the marine environment. Environmental monitoring of biota e.g., Baltic herring and guillemot eggs, is conducted annually in Sweden to follow temporal changes in environmental contaminants. To determine the suitability of guillemot eggs as a sentinel species for investigating GES, we compared temporal trends of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in these two species from single sampling sites within Sweden. Lipid content from guillemot eggs was consistently high and stable (yearly mean for >40 years, ∼12%) compared to that of herring (yearly mean for >20 years, ∼3%). A significant decreasing trend of ΣPCDD/F in TEQ WHO1998 was observed in guillemot eggs, but no trend was seen in herring. CB118 significantly decreased in both species, but in the last 10 years this decrease was not significant in herring. A number of advantages, such as high lipid content in the egg and a low coefficient of variation make guillemot suitable as a sentinel species. The advantages and disadvantages of using either guillemot eggs or Baltic herring are compared. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Spatiotemporal changes of wetlands in Hangzhou Bay Industrial Belt].

PubMed

Lu, Zhang-Wei; Wu, Ci-Fang; Yue, Wen-Ze; Liu, Yong; Ren, Li-Yan

2009-07-01

By using RS and GIS techniques, the spatiotemporal changes of wetlands in Hangzhou Bay Industrial Belt, one of the most developed zones in Zhejiang Province, from 1990 to 2005 were studied. There was a frequent conversion between the wetlands and other land use types and between the wetlands themselves, mainly manifested in the conversion between wetland and farmland, and from wetland to construction land and from tidal flat to aquiculture area. The comparative advantage of other land use types and the policy of cultivated land's requisition-compensation balance decided the inherent mechanisms of these spatiotemporal changes. Driven by the aquaculture's comparative advantage to traditional agriculture, large areas of inland farmland and of the tidal flat along the coast of Hangzhou Bay were reclaimed into aquiculture area, and the rapid expansion of construction land, limited land resources, and the implement of cultivated land's requisition-compensation balance policy induced the wetlands being occupied.

Some general remarks on hyperplasticity modelling and its extension to partially saturated soils

NASA Astrophysics Data System (ADS)

Lei, Xiaoqin; Wong, Henry; Fabbri, Antonin; Bui, Tuan Anh; Limam, Ali

2016-06-01

The essential ideas and equations of classic plasticity and hyperplasticity are successively recalled and compared, in order to highlight their differences and complementarities. The former is based on the mathematical framework proposed by Hill (The mathematical theory of plasticity. Oxford University Press, Oxford, 1950), whereas the latter is founded on the orthogonality hypothesis of Ziegler (An introduction to thermomechanics. Elsevier, North-Holland, 1983). The main drawback of classic plasticity is the possibility of violating the second principle of thermodynamics, while the relative ease to conjecture the yield function in order to approach experimental results is its main advantage. By opposition, the a priori satisfaction of thermodynamic principles constitutes the chief advantage of hyperplasticity theory. Noteworthy is also the fact that this latter approach allows a finer energy partition; in particular, the existence of frozen energy emerges as a natural consequence from its theoretical formulation. On the other hand, the relative difficulty to conjecture an efficient dissipation function to produce accurate predictions is its main drawback. The two theories are thus better viewed as two complementary approaches. Following this comparative study, a methodology to extend the hyperplasticity approach initially developed for dry or saturated materials to the case of partially saturated materials, accounting for interface energies and suction effects, is developed. A particular example based on the yield function of modified Cam-Clay model is then presented. It is shown that the approach developed leads to a model consistent with other existing works.

New oral anticoagulants: their advantages and disadvantages compared with vitamin K antagonists in the prevention and treatment of patients with thromboembolic events.

PubMed

Mekaj, Ymer H; Mekaj, Agon Y; Duci, Shkelzen B; Miftari, Ermira I

2015-01-01

Despite the discovery and application of many parenteral (unfractionated and low-molecular-weight heparins) and oral anticoagulant vitamin K antagonist (VKA) drugs, the prevention and treatment of venous and arterial thrombotic phenomena remain major medical challenges. Furthermore, VKAs are the only oral anticoagulants used during the past 60 years. The main objective of this study is to present recent data on non-vitamin K antagonist oral anticoagulants (NOACs) and to analyze their advantages and disadvantages compared with those of VKAs based on a large number of recent studies. NOACs are novel direct-acting medications that are selective for one specific coagulation factor, either thrombin (IIa) or activated factor X (Xa). Several NOACs, such as dabigatran (a direct inhibitor of FIIa) and rivaroxaban, apixaban and edoxaban (direct inhibitors of factor Xa), have been used for at least 5 years but possibly 10 years. Unlike traditional VKAs, which prevent the coagulation process by suppressing the synthesis of vitamin K-dependent factors, NOACs directly inhibit key proteases (factors IIa and Xa). The important indications of these drugs are the prevention and treatment of deep vein thrombosis and pulmonary embolisms, and the prevention of atherothrombotic events in the heart and brain of patients with acute coronary syndrome and atrial fibrillation. They are not fixed, and dose-various strengths are available. Most studies have reported that more advantages than disadvantages for NOACs when compared with VKAs, with the most important advantages of NOACs including safety issues (ie, a lower incidence of major bleeding), convenience of use, minor drug and food interactions, a wide therapeutic window, and no need for laboratory monitoring. Nonetheless, there are some conditions for which VKAs remain the drug of choice. Based on the available data, we can conclude that NOACs have greater advantages and fewer disadvantages compared with VKAs. New studies are required to further assess the efficacy of NOACs.

New oral anticoagulants: their advantages and disadvantages compared with vitamin K antagonists in the prevention and treatment of patients with thromboembolic events

PubMed Central

Mekaj, Ymer H; Mekaj, Agon Y; Duci, Shkelzen B; Miftari, Ermira I

2015-01-01

Despite the discovery and application of many parenteral (unfractionated and low-molecular-weight heparins) and oral anticoagulant vitamin K antagonist (VKA) drugs, the prevention and treatment of venous and arterial thrombotic phenomena remain major medical challenges. Furthermore, VKAs are the only oral anticoagulants used during the past 60 years. The main objective of this study is to present recent data on non-vitamin K antagonist oral anticoagulants (NOACs) and to analyze their advantages and disadvantages compared with those of VKAs based on a large number of recent studies. NOACs are novel direct-acting medications that are selective for one specific coagulation factor, either thrombin (IIa) or activated factor X (Xa). Several NOACs, such as dabigatran (a direct inhibitor of FIIa) and rivaroxaban, apixaban and edoxaban (direct inhibitors of factor Xa), have been used for at least 5 years but possibly 10 years. Unlike traditional VKAs, which prevent the coagulation process by suppressing the synthesis of vitamin K-dependent factors, NOACs directly inhibit key proteases (factors IIa and Xa). The important indications of these drugs are the prevention and treatment of deep vein thrombosis and pulmonary embolisms, and the prevention of atherothrombotic events in the heart and brain of patients with acute coronary syndrome and atrial fibrillation. They are not fixed, and dose-various strengths are available. Most studies have reported that more advantages than disadvantages for NOACs when compared with VKAs, with the most important advantages of NOACs including safety issues (ie, a lower incidence of major bleeding), convenience of use, minor drug and food interactions, a wide therapeutic window, and no need for laboratory monitoring. Nonetheless, there are some conditions for which VKAs remain the drug of choice. Based on the available data, we can conclude that NOACs have greater advantages and fewer disadvantages compared with VKAs. New studies are required to further assess the efficacy of NOACs. PMID:26150723

Evidence-based medicine: Dupuytren contracture.

PubMed

Eaton, Charles

2014-05-01

After studying this article, the participant should be able to: (1) Describe features and clinical importance of Dupuytren diathesis. (2) Explain the difference between the new definition of recurrence used in collagenase studies compared with prior definitions of recurrence. (3) Compare and list the main advantage/main disadvantage of fasciectomy versus minimally invasive treatment (collagenase injection or needle aponeurotomy) of Dupuytren contracture. The large body of existing literature on Dupuytren disease is spread across many journals in many specialties. It is thus a daunting task for practitioners to follow trends and practice recommendations. It is also a testimony to the lack of an acceptable solution to this common problem. Recent publications provide evidence to highlight controversies and challenge some traditional teachings. Literature from 2010 to 2012 was reviewed with the intent of clarifying some of these issues.

Review of fluid and control technology of hydraulic wind turbines

NASA Astrophysics Data System (ADS)

Cai, Maolin; Wang, Yixuan; Jiao, Zongxia; Shi, Yan

2017-09-01

This study examines the development of the fluid and control technology of hydraulic wind turbines. The current state of hydraulic wind turbines as a new technology is described, and its basic fluid model and typical control method are expounded by comparing various study results. Finally, the advantages of hydraulic wind turbines are enumerated. Hydraulic wind turbines are expected to become the main development direction of wind turbines.

A hydrodynamic model for cooperating solidary countries

NASA Astrophysics Data System (ADS)

De Luca, Roberto; Di Mauro, Marco; Falzarano, Angelo; Naddeo, Adele

2017-07-01

The goal of international trade theories is to explain the exchange of goods and services between different countries, aiming to benefit from it. Albeit the idea is very simple and known since ancient history, smart policy and business strategies need to be implemented by each subject, resulting in a complex as well as not obvious interplay. In order to understand such a complexity, different theories have been developed since the sixteenth century and today new ideas still continue to enter the game. Among them, the so called classical theories are country-based and range from Absolute and Comparative Advantage theories by A. Smith and D. Ricardo to Factor Proportions theory by E. Heckscher and B. Ohlin. In this work we build a simple hydrodynamic model, able to reproduce the main conclusions of Comparative Advantage theory in its simplest setup, i.e. a two-country world with country A and country B exchanging two goods within a genuine exchange-based economy and a trade flow ruled only by market forces. The model is further generalized by introducing money in order to discuss its role in shaping trade patterns. Advantages and drawbacks of the model are also discussed together with perspectives for its improvement.

[Advantages and disadvantages of femtosecond laser assisted LASIK and SMILE].

PubMed

Zhang, F J; Sun, M S

2018-01-11

With the development of excimer laser and femtosecond laser equipment, application of diversified and customized surgical decision in modern corneal refractive surgery has been an inevitable trend. However, how to make a personalized decision with an accurate surgical design to achieve better visual quality becomes the main focus in clinical applications. Small-incision lenticule extraction (SMILE) and femtosecond assisted laser in situ keratomileusis (FS-LASIK) have been commonly acknowledged as the mainstream of corneal refractive surgery for ametropia correction nowadays. Both methods have been verified by clinical practice for many years. This article compares and elaborates the different characteristics with advantages and disadvantages of the two methods so as to provide some reasonable treatment options for refractive surgery. (Chin J Ophthalmol, 2018, 54: 7-10) .

Economic efficiency of application of innovative materials and structures in high-rise construction

NASA Astrophysics Data System (ADS)

Golov, Roman; Dikareva, Varvara; Gorshkov, Roman; Agarkov, Anatoly

2018-03-01

The article is devoted to the analysis of technical and economic efficiency of application of tube confined concrete structures in high-rise construction. The study of comparative costs of materials with the use of different supporting columns was carried out. The main design, operational, technological and economic advantages of the tube confined concrete technology were evaluated, conclusions were drawn about the high strength and deformation properties of axial compression of steel tubes filled with high-strength concrete. The efficiency of the tube confined concrete use is substantiated, which depends mainly on the scale factor and percentage of reinforcement affecting its load-bearing capacity.

Simbol-X Core Science in a Context

NASA Astrophysics Data System (ADS)

Fiore, F.; Arnaud, M.; Briel, U.; Cavazzuti, E.; Cledassou, R.; Counil, J. L.; Comastri, A.; Ferrando, P.; Giommi, P.; Goldwurm, A.; Lamarle, O.; Lanzuisi, G.; Laurent, P.; Lebrun, F.; Malaguti, G.; Mereghetti, S.; Micela, G.; Pareschi, G.; Piconcelli, E.; Piermaria, M.; Puccetti, S.; Roques, J.-P.; Tagliaferri, G.; Vignali, C.

2009-05-01

Taking advantage of emerging technology in mirror manufacturing and spacecraft formation flying, Simbol-X will push grazing incidence imaging up to ~80 keV, providing an improvement of roughly three orders of magnitude in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. This will open a new window in X-ray astronomy, allowing breakthrough studies on black hole physics and census and particle acceleration mechanisms. We discuss here synergies between Simbol-X and the main multiwavelength facilities that will operate in the next decade, and present a quantitative comparison between Simbol-X and its main competitors, NuStar and Astro-H.

Extensions of the survival advantage in memory: examining the role of ancestral context and implied social isolation.

PubMed

Kostic, Bogdan; McFarlan, Chastity C; Cleary, Anne M

2012-07-01

Recent work (e.g., Nairne & Pandeirada, 2010) has shown that words are remembered better when they have been processed for their survival value in a grasslands context than when processed in other contexts. It has been suggested that this is because human memory systems were shaped by evolution specifically to help humans survive. Thus far, the survival processing advantage has mainly been shown with grasslands contexts, which are thought to be particularly relevant to human evolution. The present study demonstrated the survival processing advantage with other contexts (e.g., lost in a jungle), including with contexts that should not, in and of themselves, be relevant to human evolution (e.g., lost in outer space). We further examined whether implied social isolation plays a critical role in the survival advantage to memory by comparing scenarios in which the person is alone versus with other people present (e.g., lost at sea alone or with others), and whether the perceived source of danger is social isolation or other human attackers. A survival advantage was shown in both the isolation and the group settings, and whether the primary source of danger was isolation or other human attackers did not matter. These findings suggest that the survival advantage in memory is not dependent on evolutionarily relevant physical contexts (e.g., grasslands) or particular sources of perceived danger (social isolation vs. perceived attackers), showing the advantage to be robust and applicable to a variety of scenarios. 2012 APA, all rights reserved

Two-Stage Approach to Image Classification by Deep Neural Networks

NASA Astrophysics Data System (ADS)

Ososkov, Gennady; Goncharov, Pavel

2018-02-01

The paper demonstrates the advantages of the deep learning networks over the ordinary neural networks on their comparative applications to image classifying. An autoassociative neural network is used as a standalone autoencoder for prior extraction of the most informative features of the input data for neural networks to be compared further as classifiers. The main efforts to deal with deep learning networks are spent for a quite painstaking work of optimizing the structures of those networks and their components, as activation functions, weights, as well as the procedures of minimizing their loss function to improve their performances and speed up their learning time. It is also shown that the deep autoencoders develop the remarkable ability for denoising images after being specially trained. Convolutional Neural Networks are also used to solve a quite actual problem of protein genetics on the example of the durum wheat classification. Results of our comparative study demonstrate the undoubted advantage of the deep networks, as well as the denoising power of the autoencoders. In our work we use both GPU and cloud services to speed up the calculations.

On the evolution of intergenerational division of labor, menopause and transfers among adults and offspring

PubMed Central

Cyrus Chu, C.Y.; Lee, Ronald D.

2013-01-01

We explain how upward transfers from adult children to their elderly parents might evolve as an interrelated feature of a deepening intergenerational division of labor. Humans have a particularly long period of juvenile dependence requiring both food and care time provided mainly by younger and older adults. We suggest that the division of labor evolves to exploit comparative advantage between young and old adults in fertility, childcare and foraging. Eventually the evolving division of labor reaches a limit when the grandmother's fertility reaches zero (menopause). Continuing, it may hit another limit when the grandmother's foraging time has been reduced to her subsistence needs. Further specialization can occur only with food transfers to the grandmother, enabling her to reduce her foraging time to concentrate on additional childcare. We prove that this outcome can arise only after menopause has evolved. We describe the conditions necessary for both group selection (comparative steady state reproductive fitness) and individual selection (successful invasion by a mutation), and interpret these conditions in terms of comparative advantages. PMID:23648187

Research on Aerodynamic Characteristics of Composite powered Unmanned Airship

NASA Astrophysics Data System (ADS)

Chen, Yu; Wang, Yun; Wang, Lu; Ma, Chengyu; Xia, Jun

2017-10-01

The main structure of the composite powered unmanned airship is consists of airbags and four-rotor system, which airbag increases the available lift, and has more advantages in terms of load and flight when compared with the traditional four-rotor. In order to compare the aerodynamic performance of the composite powered unmanned airship and the traditional four-rotor, the SIMPLE algorithm and the RNG k-epsilon model method are be used. The energy consumption of the composite powered unmanned airship is lesser than the traditional four-rotor under the same load and range was found.

A Hybrid On-line Verification Method of Relay Setting

NASA Astrophysics Data System (ADS)

Gao, Wangyuan; Chen, Qing; Si, Ji; Huang, Xin

2017-05-01

Along with the rapid development of the power industry, grid structure gets more sophisticated. The validity and rationality of protective relaying are vital to the security of power systems. To increase the security of power systems, it is essential to verify the setting values of relays online. Traditional verification methods mainly include the comparison of protection range and the comparison of calculated setting value. To realize on-line verification, the verifying speed is the key. The verifying result of comparing protection range is accurate, but the computation burden is heavy, and the verifying speed is slow. Comparing calculated setting value is much faster, but the verifying result is conservative and inaccurate. Taking the overcurrent protection as example, this paper analyses the advantages and disadvantages of the two traditional methods above, and proposes a hybrid method of on-line verification which synthesizes the advantages of the two traditional methods. This hybrid method can meet the requirements of accurate on-line verification.

Does hydroxyapatite coating have no advantage over porous coating in primary total hip arthroplasty? A meta-analysis.

PubMed

Chen, Yun-Lin; Lin, Tiao; Liu, An; Shi, Ming-Min; Hu, Bin; Shi, Zhong-Li; Yan, Shi-Gui

2015-01-28

There are some arguments between the use of hydroxyapatite and porous coating. Some studies have shown that there is no difference between these two coatings in total hip arthroplasty (THA), while several other studies have shown that hydroxyapatite has advantages over the porous one. We have collected the studies in Pubmed, MEDLINE, EMBASE, and the Cochrane library from the earliest possible years to present, with the search strategy of "(HA OR hydroxyapatite) AND ((total hip arthroplasty) OR (total hip replacement)) AND (RCT* OR randomiz* OR control* OR compar* OR trial*)". The randomized controlled trials and comparative observation trials that evaluated the clinical and radiographic effects between hydroxyapatite coating and porous coating were included. Our main outcome measurements were Harris hip score (HHS) and survival, while the secondary outcome measurements were osteolysis, radiolucent lines, and polyethylene wear. Twelve RCTs and 9 comparative observation trials were included. Hydroxyapatite coating could improve the HHS (p < 0.01), reduce the incidence of thigh pain (p = 0.01), and reduce the incidence of femoral osteolysis (p = 0.01), but hydroxyapatite coating had no advantages on survival (p = 0.32), polyethylene wear (p = 0.08), and radiolucent lines (p = 0.78). Hydroxyapatite coating has shown to have an advantage over porous coating. The HHS and survival was duration-dependent-if given the sufficient duration of follow-up, hydroxyapatite coating would be better than porous coating for the survival. The properties of hydroxyapatite and the implant design had influence on thigh pain incidence, femoral osteolysis, and polyethylene wear. Thickness of 50 to 80 μm and purity larger than 90% increased the thigh pain incidence. Anatomic design had less polyethylene wear.

A fully resolved consensus between fully resolved phylogenetic trees.

PubMed

Quitzau, José Augusto Amgarten; Meidanis, João

2006-03-31

Nowadays, there are many phylogeny reconstruction methods, each with advantages and disadvantages. We explored the advantages of each method, putting together the common parts of trees constructed by several methods, by means of a consensus computation. A number of phylogenetic consensus methods are already known. Unfortunately, there is also a taboo concerning consensus methods, because most biologists see them mainly as comparators and not as phylogenetic tree constructors. We challenged this taboo by defining a consensus method that builds a fully resolved phylogenetic tree based on the most common parts of fully resolved trees in a given collection. We also generated results showing that this consensus is in a way a kind of "median" of the input trees; as such it can be closer to the correct tree in many situations.

Impact of social challenges on gaining employment for veterans with posttraumatic stress disorder: an exploratory moderator analysis.

PubMed

Davis, Lori L; Pilkinton, Patricia; Poddar, Swati; Blansett, Catherine; Toscano, Richard; Parker, Pamela E

2014-06-01

To explore whether psychosocial challenges impact effects of vocational rehabilitation in Veterans with Posttraumatic Stress Disorder (PTSD). A post hoc exploratory analysis of possible moderators of treatment was conducted on outcomes from a randomized, controlled trial of Individual Placement and Support in Veterans with PTSD. When examining groups within each moderator, there was a greater IPS supportive employment benefit in gaining competitive employment for those with inadequate transportation (number needed to treat [NNT] = 1.5) and inadequate housing (NNT = 1.5) compared with the main finding of the pilot study (NNT = 2.07). Compared with the main finding of the pilot study, there was no greater advantage of IPS for those with adequate transportation (NNT = 2.4) or adequate housing (NNT = 2.4). Compared with the main finding in the pilot study, those without a family care burden had a greater benefit from IPS (NNT = 1.4) and those with family care burden had a reduced treatment effect (NNT = 3.3). These results are exploratory and are not intended to guide clinical decision-making, but rather offer a potentially useful strategy in the design of larger trials of IPS.

Gait Recognition Based on Convolutional Neural Networks

NASA Astrophysics Data System (ADS)

Sokolova, A.; Konushin, A.

2017-05-01

In this work we investigate the problem of people recognition by their gait. For this task, we implement deep learning approach using the optical flow as the main source of motion information and combine neural feature extraction with the additional embedding of descriptors for representation improvement. In order to find the best heuristics, we compare several deep neural network architectures, learning and classification strategies. The experiments were made on two popular datasets for gait recognition, so we investigate their advantages and disadvantages and the transferability of considered methods.

[Stapler versus manual anastomosis in gastrointestinal surgery].

PubMed

Moreno-Gonzalez, E; Vara-Thorbeck, R

1987-01-01

The comparative effectiveness of manual and auto-sutured anastomoses after total gastrectomy (107 cases), low anterior rectal resection (100 cases) and right hemicolectomy (34 cases) is studied. In the stapled series the incidence of anastomotic leakage was somewhat less, although benign stenosis occurred more frequently than with hand-sutured anastomoses. However, this could not be statistically demonstrated. In the authors' view, the main advantages of the use of staplers are the shortening of operating time and the lessening of septic steps.

Finale furioso: referee-biased injury times and their effects on home advantage in football.

PubMed

Riedl, Dennis; Strauss, Bernd; Heuer, Andreas; Rubner, Oliver

2015-01-01

The role of referees has become a central issue in the investigation of home advantage. The main aim of this study was a thorough examination of the referee bias concerning injury time in football, which is currently seen as an important example for the assertion that referees contribute to home advantage. First, we use archival data from the German Bundesliga (seasons 2000/2001-2010/2011) to confirm the existence of an asymmetry in the allocation of injury time. We show this asymmetry to be a bias by ruling out hitherto remaining alternative explanations (effect = 18 s, P < 0.001, R2(adj) = 0.05). Second, we identify a further referee bias, stating that referees systematically accord more injury time when one team leads in the game compared to a draw (effect = 21 s, P = 0.004, R2(adj) = 0.06). Third, the quantitative benefit of home or away teams in goals and points due to these biases is assessed. Overall, referee decisions on injury time indeed reveal biases, but they do not contribute to the home advantage, that is, there is no significant effect on goals scored by the teams. The qualitative findings (a new bias on injury time) as well as the quantitative findings (no overall effect) shed new light on the role of referees for home advantage.

Vector diagram of the chemical compositions of tektites and earth lavas

NASA Technical Reports Server (NTRS)

Kvasha, L. G.; Gorshkov, G. S.

1978-01-01

The chemical compositions of tektites and various volcanic glasses, similar in composition to tektites are compared by a petrochemical method. The advantage of the method is that a large number of chemical analyses of igneous rocks can be graphically compared with the help of vectors, plotted in relation to six parameters. These parameters, calculated from ratios of the main oxides given by silicate analysis, reflect the chief characteristics of igneous rock. Material for the study was suppled by data from chemical analysis characterizing tektites of all known locations and data from chemical analyses of obsidians similar in chemical composition to tektites of various petrographical provinces.

Robotics and tele-manipulation: update and perspectives in urology.

PubMed

Frede, T; Jaspers, J; Hammady, A; Lesch, J; Teber, D; Rassweiler, J

2007-06-01

Robotic surgery in urology has become a reality in the year 2007 with several thousand robotic prostatectomies having been performed already worldwide. Compared to conventional laparoscopy, the process of learning the robotic technique is short and the operative results are comparable to those of conventional laparoscopy or even open surgery. However, there are still some disadvantages with the robotic systems, mainly technical (tactile feedback) and financial (investment and running costs). Alternative and more inexpensive technologies must be considered in order to overcome the difficulties of conventional laparoscopy (instrument handling, degrees of freedom, 3-D vision), while also integrating advantages of the robotic systems.

Did Babe Ruth Have a Comparative Advantage as a Pitcher?

ERIC Educational Resources Information Center

Scahill, Edward M.

1990-01-01

Advocates using baseball statistics to illustrate the advantages of specialization in production. Using Babe Ruth's record as an analogy, suggests a methodology for determining a player's comparative advantage as a teaching illustration. Includes the team's statistical profile in five tables to explain comparative advantage and profit maximizing.…

Transperineal Ultrasound as a Tool to Plan Surgical Strategies in Pediatric Urology: Back to the Future?

PubMed

de Jesus, Lisieux Eyer; Fazecas, Tatiana; Ribeiro, Bianca G; Dekermacher, Samuel

2017-06-01

To demonstrate the usefulness and advantages of transperineal ultrasound (TPUS) on planning the surgical tactics to treat childhood pelviperineal disease (CPPD). A cohort of CPPD is reviewed to provide a pictorial review of TPUS as imaging method variety of CPPD. Other imaging methods are compared with TPUS. TPUS studies of patients showing different conditions on the spectrum of pelviperineal malformation are shown in detail (pictorial review, graphically shown-see figures in the article and as supplementary material), highlighting the advantages of the method and comparing TPUS findings with other imaging techniques. Magnetic resonance imaging, contrast genitograms, voiding cystourethrography, and genital or urologic endoscopy have some important disadvantages, especially radiation exposure, high cost, not easily available equipment, and the need of general anesthesia or deep sedation in children. TPUS is easily available, including in impoverished environments, portable, painless, reproducible, inexpensive, and capable of providing detailed and specific information about pelviperineal malformation with accuracy. Data provided by TPUS are comparable with other imaging techniques (Table 1). Its main disadvantage is the dependency on the expertise of the operator to obtain high-quality, well-interpreted images. Copyright © 2017 Elsevier Inc. All rights reserved.

Dissociation cross section for high energy O2-O2 collisions

NASA Astrophysics Data System (ADS)

Mankodi, T. K.; Bhandarkar, U. V.; Puranik, B. P.

2018-04-01

Collision-induced dissociation cross section database for high energy O2-O2 collisions (up to 30 eV) is generated and published using the quasiclassical trajectory method on the singlet, triplet, and quintet spin ground state O4 potential energy surfaces. At equilibrium conditions, these cross sections predict reaction rate coefficients that match those obtained experimentally. The main advantage of the cross section database based on ab initio computations is in the study of complex flows with high degree of non-equilibrium. Direct simulation Monte Carlo simulations using the reactive cross section databases are carried out for high enthalpy hypersonic oxygen flow over a cylinder at rarefied ambient conditions. A comparative study with the phenomenological total collision energy chemical model is also undertaken to point out the difference and advantage of the reported ab initio reaction model.

Strategic Choice: United States Special Forces’ Comparative Advantage in Irregular Warfare

DTIC Science & Technology

2017-03-01

UNITED STATES SPECIAL FORCES’ COMPARATIVE ADVANTAGE IN IRREGULAR WARFARE by Steven F. Payne March 2017 Thesis Advisor: Hy S. Rothstein...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE STRATEGIC CHOICE: UNITED STATES SPECIAL FORCES’ COMPARATIVE ADVANTAGE IN...methodology, this thesis concludes that U.S. Army Special Forces have a comparative advantage over conventional forces to provide the National Command

Understanding the Influence of Race/Ethnicity, Gender, and Class on Inequalities in Academic and Non-Academic Outcomes among Eighth-Grade Students: Findings from an Intersectionality Approach

PubMed Central

Bécares, Laia; Priest, Naomi

2015-01-01

Socioeconomic, racial/ethnic, and gender inequalities in academic achievement have been widely reported in the US, but how these three axes of inequality intersect to determine academic and non-academic outcomes among school-aged children is not well understood. Using data from the US Early Childhood Longitudinal Study—Kindergarten (ECLS-K; N = 10,115), we apply an intersectionality approach to examine inequalities across eighth-grade outcomes at the intersection of six racial/ethnic and gender groups (Latino girls and boys, Black girls and boys, and White girls and boys) and four classes of socioeconomic advantage/disadvantage. Results of mixture models show large inequalities in socioemotional outcomes (internalizing behavior, locus of control, and self-concept) across classes of advantage/disadvantage. Within classes of advantage/disadvantage, racial/ethnic and gender inequalities are predominantly found in the most advantaged class, where Black boys and girls, and Latina girls, underperform White boys in academic assessments, but not in socioemotional outcomes. In these latter outcomes, Black boys and girls perform better than White boys. Latino boys show small differences as compared to White boys, mainly in science assessments. The contrasting outcomes between racial/ethnic and gender minorities in self-assessment and socioemotional outcomes, as compared to standardized assessments, highlight the detrimental effect that intersecting racial/ethnic and gender discrimination have in patterning academic outcomes that predict success in adult life. Interventions to eliminate achievement gaps cannot fully succeed as long as social stratification caused by gender and racial discrimination is not addressed. PMID:26505623

Understanding the Influence of Race/Ethnicity, Gender, and Class on Inequalities in Academic and Non-Academic Outcomes among Eighth-Grade Students: Findings from an Intersectionality Approach.

PubMed

Bécares, Laia; Priest, Naomi

2015-01-01

Socioeconomic, racial/ethnic, and gender inequalities in academic achievement have been widely reported in the US, but how these three axes of inequality intersect to determine academic and non-academic outcomes among school-aged children is not well understood. Using data from the US Early Childhood Longitudinal Study-Kindergarten (ECLS-K; N = 10,115), we apply an intersectionality approach to examine inequalities across eighth-grade outcomes at the intersection of six racial/ethnic and gender groups (Latino girls and boys, Black girls and boys, and White girls and boys) and four classes of socioeconomic advantage/disadvantage. Results of mixture models show large inequalities in socioemotional outcomes (internalizing behavior, locus of control, and self-concept) across classes of advantage/disadvantage. Within classes of advantage/disadvantage, racial/ethnic and gender inequalities are predominantly found in the most advantaged class, where Black boys and girls, and Latina girls, underperform White boys in academic assessments, but not in socioemotional outcomes. In these latter outcomes, Black boys and girls perform better than White boys. Latino boys show small differences as compared to White boys, mainly in science assessments. The contrasting outcomes between racial/ethnic and gender minorities in self-assessment and socioemotional outcomes, as compared to standardized assessments, highlight the detrimental effect that intersecting racial/ethnic and gender discrimination have in patterning academic outcomes that predict success in adult life. Interventions to eliminate achievement gaps cannot fully succeed as long as social stratification caused by gender and racial discrimination is not addressed.

Methodology for the Evaluation of the Algorithms for Text Line Segmentation Based on Extended Binary Classification

NASA Astrophysics Data System (ADS)

Brodic, D.

2011-01-01

Text line segmentation represents the key element in the optical character recognition process. Hence, testing of text line segmentation algorithms has substantial relevance. All previously proposed testing methods deal mainly with text database as a template. They are used for testing as well as for the evaluation of the text segmentation algorithm. In this manuscript, methodology for the evaluation of the algorithm for text segmentation based on extended binary classification is proposed. It is established on the various multiline text samples linked with text segmentation. Their results are distributed according to binary classification. Final result is obtained by comparative analysis of cross linked data. At the end, its suitability for different types of scripts represents its main advantage.

Patient-specific instruments: advantages and pitfalls

PubMed Central

Hafez, Mahmoud A.; Moholkar, Kirti

2017-01-01

Patient-specific instruments (PSI) aim to improve the accuracy of total knee replacement (TKR) based on computer-assisted preoperative planning. In this work, the authors describe the advantages and pitfalls of PSI based on their clinical experience. The main conclusion of this work is that PSI has direct impact on the logistical and technical features of TKR with some advantages and pitfalls. PMID:29227785

School Enrollment among Urban Non-Slum, Slum and Rural Children in Kenya: Is the Urban Advantage Eroding?

ERIC Educational Resources Information Center

Mugisha, Frederick

2006-01-01

For long now, the urban child has been considered to be more likely than his/her rural counterpart in being able to realize the dream of fully participating in school. This observation has mainly been attributed to what is commonly known as the "urban advantage." This "urban advantage" is associated with increased access to…

Advantages and Disadvantages of the National Security Personnel System as Compared to the General Schedule Personnel System

DTIC Science & Technology

2005-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA JOINT APPLIED PROJECT Advantages and Disadvantages of the National Security...Applied Project 4. TITLE AND SUBTITLE: Advantages and Disadvantages of the National Security Personnel System as Compared to the General...compare and contrast the advantages and disadvantages of the new personnel system (NSPS) versus the General Schedule (GS) personnel system currently

Associative memory advantage in grapheme-color synesthetes compared to older, but not young adults

PubMed Central

Pfeifer, Gaby; Rothen, Nicolas; Ward, Jamie; Chan, Dennis; Sigala, Natasha

2014-01-01

People with grapheme-color synesthesia perceive enriched experiences of colors in response to graphemes (letters, digits). In this study, we examined whether these synesthetes show a generic associative memory advantage for stimuli that do not elicit a synesthetic color. We used a novel between group design (14 young synesthetes, 14 young, and 14 older adults) with a self-paced visual associative learning paradigm and subsequent retrieval (immediate and delayed). Non-synesthesia inducing, achromatic fractal pair-associates were manipulated in visual similarity (high and low) and corresponded to high and low memory load conditions. The main finding was a learning and retrieval advantage of synesthetes relative to older, but not to younger, adults. Furthermore, the significance testing was supported with effect size measures and power calculations. Differences between synesthetes and older adults were found during dissimilar pair (high memory load) learning and retrieval at immediate and delayed stages. Moreover, we found a medium size difference between synesthetes and young adults for similar pair (low memory load) learning. Differences between young and older adults were also observed during associative learning and retrieval, but were of medium effect size coupled with low power. The results show a subtle associative memory advantage in synesthetes for non-synesthesia inducing stimuli, which can be detected against older adults. They also indicate that perceptual mechanisms (enhanced in synesthesia, declining as part of the aging process) can translate into a generic associative memory advantage, and may contribute to associative deficits accompanying healthy aging. PMID:25071664

A novel method for overlapping community detection using Multi-objective optimization

NASA Astrophysics Data System (ADS)

Ebrahimi, Morteza; Shahmoradi, Mohammad Reza; Heshmati, Zainabolhoda; Salehi, Mostafa

2018-09-01

The problem of community detection as one of the most important applications of network science can be addressed effectively by multi-objective optimization. In this paper, we aim to present a novel efficient method based on this approach. Also, in this study the idea of using all Pareto fronts to detect overlapping communities is introduced. The proposed method has two main advantages compared to other multi-objective optimization based approaches. The first advantage is scalability, and the second is the ability to find overlapping communities. Despite most of the works, the proposed method is able to find overlapping communities effectively. The new algorithm works by extracting appropriate communities from all the Pareto optimal solutions, instead of choosing the one optimal solution. Empirical experiments on different features of separated and overlapping communities, on both synthetic and real networks show that the proposed method performs better in comparison with other methods.

Microalgal symbiosis in biotechnology.

PubMed

Santos, Carla A; Reis, Alberto

2014-07-01

This review provides an analysis of recent published work on interactions between microorganisms, especially the ones involving mainly nutrient exchanges and at least with one microalga species. Examples of microbial partners are given, with a remark to the potential application of cultures of an autotroph and a heterotroph, which grow simultaneously, taking advantage of the complementary metabolisms. These are particularly interesting, either due to economic or sustainable aspects, and some applications have already reached the commercial stage of development. The added advantages of these symbiotic cultures are biomass, lipid, and other products productivity enhancement a better utilization of resources and the reduction or even elimination of process residues (including carbon dioxide and other greenhouse gases) to conduct an increasingly greener biotechnology. Among the several symbiotic partners referred, the microalgae and yeast cultures are the most used. The interaction between these two microorganisms shows how to enhance the lipid production for biodiesel purposes compared with separated (stand-alone) cultures.

Possible applications for municipal solid waste fly ash.

PubMed

Ferreira, C; Ribeiro, A; Ottosen, L

2003-01-31

The present study focuses on existing practices related to the reuse of Municipal Solid Waste (MSW) fly ash and identifies new potential uses. Nine possible applications were identified and grouped into four main categories: construction materials (cement, concrete, ceramics, glass and glass-ceramics); geotechnical applications (road pavement, embankments); "agriculture" (soil amendment); and, miscellaneous (sorbent, sludge conditioning). Each application is analysed in detail, including final-product technical characteristics, with a special emphasis on environmental impacts. A comparative analysis of the different options is performed, stressing the advantages but also the weaknesses of each option. This information is systemized in order to provide a framework for the selection of best technology and final products. The results presented here show new possibilities for this waste reuse in a short-term, in a wide range of fields, resulting in great advantages in waste minimization as well as resources conservation.

[Radial Approach for Percutaneous Coronary Interventions in Patients With Ischemic Heart Disease: Advantages and Disadvantages, Complications Rate in Comparison With Femoral Approach].

PubMed

Fettser, D V; Batyraliev, T A; Pershukov, I V; Vanyukov, A E; Sidorenko, B A

2017-05-01

During recent 10-15 years, percutaneous coronary interventions (PCI) have reached a new level of efficacy and safety. Rate of serious coronary complications has decreased. That to a greater degree exposes the problem of peripheral complications at the site of arterial approach. At the same time portion of patients older than 75 years in the total pool of PCI constantly increases. Number of patients with pronounced obesity also grows each year. Radial approach for PCI allows to substantially decrease rate of peripheral complications at the account of lowered rate of bleedings, and to shorten duration of hospitalization. In this literature review we present results of a number of relevant clinical studies including those which contained groups of elderly patients and of patients with obesity. We also have summarized main advantages and disadvantages of radial approach as compared with femoral approach for coronary angiography and PCI.

A resource management architecture based on complex network theory in cloud computing federation

NASA Astrophysics Data System (ADS)

Zhang, Zehua; Zhang, Xuejie

2011-10-01

Cloud Computing Federation is a main trend of Cloud Computing. Resource Management has significant effect on the design, realization, and efficiency of Cloud Computing Federation. Cloud Computing Federation has the typical characteristic of the Complex System, therefore, we propose a resource management architecture based on complex network theory for Cloud Computing Federation (abbreviated as RMABC) in this paper, with the detailed design of the resource discovery and resource announcement mechanisms. Compare with the existing resource management mechanisms in distributed computing systems, a Task Manager in RMABC can use the historical information and current state data get from other Task Managers for the evolution of the complex network which is composed of Task Managers, thus has the advantages in resource discovery speed, fault tolerance and adaptive ability. The result of the model experiment confirmed the advantage of RMABC in resource discovery performance.

Second-order oriented partial-differential equations for denoising in electronic-speckle-pattern interferometry fringes.

PubMed

Tang, Chen; Han, Lin; Ren, Hongwei; Zhou, Dongjian; Chang, Yiming; Wang, Xiaohang; Cui, Xiaolong

2008-10-01

We derive the second-order oriented partial-differential equations (PDEs) for denoising in electronic-speckle-pattern interferometry fringe patterns from two points of view. The first is based on variational methods, and the second is based on controlling diffusion direction. Our oriented PDE models make the diffusion along only the fringe orientation. The main advantage of our filtering method, based on oriented PDE models, is that it is very easy to implement compared with the published filtering methods along the fringe orientation. We demonstrate the performance of our oriented PDE models via application to two computer-simulated and experimentally obtained speckle fringes and compare with related PDE models.

Ultrasound-assisted synthesis of novel 4-(2-phenyl-1,2,3-triazol-4-yl)-3,4-dihydropyrimidin-(1H)-(thio)ones catalyzed by Sm(ClO(4))(3).

PubMed

Liu, Chen-Jiang; Wang, Ji-De

2010-03-24

An efficient synthesis of novel 4-(2-phenyl-1,2,3-triazol-4-yl)-3,4-dihydro-pyrimidin-2(1H)-(thio)ones from 1,3-dicarbonyl compounds, 2-phenyl-1,2,3-triazole-4-carbaldehyde and urea or thiourea under ultrasound irradiation and using samarium perchlorate as catalyst is described. Compared with conventional methods, the main advantages of the present methodology are milder conditions, shorter reaction times and higher yields.

Preliminary performances measured on a CMOS long linear array for space application

NASA Astrophysics Data System (ADS)

Renard, Christophe; Artinian, Armand; Dantes, Didier; Lepage, Gérald; Diels, Wim

2017-11-01

This paper presents the design and the preliminary performances of a CMOS linear array, resulting from collaboration between Alcatel Alenia Space and Cypress Semiconductor BVBA, which takes advantage of emerging potentialities of CMOS technologies. The design of the sensor is presented: it includes 8000 panchromatic pixels with up to 25 rows used in TDI mode, and 4 lines of 2000 pixels for multispectral imaging. Main system requirements and detector tradeoffs are recalled, and the preliminary test results obtained with a first generation prototype are summarized and compared with predicted performances.

Remotely Operating a Fourier Transform Spectrometer for Atmospheric Remote Sensing

NASA Technical Reports Server (NTRS)

Blavier, J.-F.; Toon, G. C.; Sen, B.

2000-01-01

This paper describes how the MkIV instrument was adapted for remote operation from the Barcroft site, where the harsh winter conditions make access difficult. Some of the main technical challenges will be discussed including, (i) operation from solar panels and batteries, (ii) cooling the detectors with LN2, (iii) instrument control and monitoring over a cellular phone, and (iv) data storage, processing and analysis. Finally, MkIV spectra measured from Barcroft and compared with those measured from JPL to highlight the advantages of the higher altitude site.

Energy Aware Clustering Algorithms for Wireless Sensor Networks

NASA Astrophysics Data System (ADS)

Rakhshan, Noushin; Rafsanjani, Marjan Kuchaki; Liu, Chenglian

2011-09-01

The sensor nodes deployed in wireless sensor networks (WSNs) are extremely power constrained, so maximizing the lifetime of the entire networks is mainly considered in the design. In wireless sensor networks, hierarchical network structures have the advantage of providing scalable and energy efficient solutions. In this paper, we investigate different clustering algorithms for WSNs and also compare these clustering algorithms based on metrics such as clustering distribution, cluster's load balancing, Cluster Head's (CH) selection strategy, CH's role rotation, node mobility, clusters overlapping, intra-cluster communications, reliability, security and location awareness.

A Microwave Tunable Bandpass Filter for Liquid Crystal Applications

NASA Astrophysics Data System (ADS)

Cao, Weiping; Jiang, Di; Liu, Yupeng; Yang, Yuanwang; Gan, Baichuan

2017-07-01

In this paper, a novel microwave continuously tunable band-pass filter, based on nematic liquid crystals (LCs), is proposed. It uses liquid crystal (LC) as the electro-optic material to mainly realize frequency shift at microwave band by changing the dielectric anisotropy, when applying the bias voltage. According to simulation results, it achieves 840 MHz offset. Comparing to the existing tunable filter, it has many advantages, such as continuously tunable, miniaturization, low processing costs, low tuning voltage, etc. Thus, it has shown great potentials in frequency domain and practical applications in modern communication.

Smart Electronic Textiles.

PubMed

Weng, Wei; Chen, Peining; He, Sisi; Sun, Xuemei; Peng, Huisheng

2016-05-17

This Review describes the state-of-the-art of wearable electronics (smart textiles). The unique and promising advantages of smart electronic textiles are highlighted by comparing them with the conventional planar counterparts. The main kinds of smart electronic textiles based on different functionalities, namely the generation, storage, and utilization of electricity, are then discussed with an emphasis on the use of functional materials. The remaining challenges are summarized together with important new directions to provide some useful clues for the future development of smart electronic textiles. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Simulation of Plasma Jet Merger and Liner Formation within the PLX- α Project

NASA Astrophysics Data System (ADS)

Samulyak, Roman; Chen, Hsin-Chiang; Shih, Wen; Hsu, Scott

2015-11-01

Detailed numerical studies of the propagation and merger of high Mach number argon plasma jets and the formation of plasma liners have been performed using the newly developed method of Lagrangian particles (LP). The LP method significantly improves accuracy and mathematical rigor of common particle-based numerical methods such as smooth particle hydrodynamics while preserving their main advantages compared to grid-based methods. A brief overview of the LP method will be presented. The Lagrangian particle code implements main relevant physics models such as an equation of state for argon undergoing atomic physics transformation, radiation losses in thin optical limit, and heat conduction. Simulations of the merger of two plasma jets are compared with experimental data from past PLX experiments. Simulations quantify the effect of oblique shock waves, ionization, and radiation processes on the jet merger process. Results of preliminary simulations of future PLX- alpha experiments involving the ~ π / 2 -solid-angle plasma-liner configuration with 9 guns will also be presented. Partially supported by ARPA-E's ALPHA program.

The near-symmetry of proteins.

PubMed

Bonjack-Shterengartz, Maayan; Avnir, David

2015-04-01

The majority of protein oligomers form clusters which are nearly symmetric. Understanding of that imperfection, its origins, and perhaps also its advantages requires the conversion of the currently used vague qualitative descriptive language of the near-symmetry into an accurate quantitative measure that will allow to answer questions such as: "What is the degree of symmetry deviation of the protein?," "how do these deviations compare within a family of proteins?," and so on. We developed quantitative methods to answer this type of questions, which are capable of analyzing the whole protein, its backbone or selected portions of it, down to comparison of symmetry-related specific amino-acids, and which are capable of visualizing the various levels of symmetry deviations in the form of symmetry maps. We have applied these methods on an extensive list of homomers and heteromers and found that apparently all proteins never reach perfect symmetry. Strikingly, even homomeric protein clusters are never ideally symmetric. We also found that the main burden of symmetry distortion is on the amino-acids near the symmetry axis; that it is mainly the more hydrophilic amino-acids that take place in symmetry-distortive interactions; and more. The remarkable ability of heteromers to preserve near-symmetry, despite the different sequences, was also shown and analyzed. The comprehensive literature on the suggested advantages symmetric oligomerizations raises a yet-unsolved key question: If symmetry is so advantageous, why do proteins stop shy of perfect symmetry? Some tentative answers to be tested in further studies are suggested in a concluding outlook. © 2014 Wiley Periodicals, Inc.

Challenges and Opportunities of Gas Engine Driven Heat Pumps: Two Case Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abu-Heiba, Ahmad; Mahderekal, Dr. Isaac; Mehdizadeh Momen, Ayyoub

Gas engine driven heat pumps (GHP) currently hold a small market share. This share is considerably smaller than what the full potential of GHP technology can realize. Of the main benefits of the GHP technology is their better primary energy utilization mainly due to the ability to recover the engine heat. However, development and market penetration of GHP technology have been challenged by various market and technical barriers. The main barriers are the high initial cost, low awareness of the technology, and poor perception. On the other hand, several opportunities arise that the GHP technology can take advantage of tomore » increase its market share. The most direct opportunity is the abundance of cheap natural gas. This translates directly into monetary savings and higher ROI. GHPs offer the advantage of reducing the peak demand by 80% compared to electric counterpart. From the point of view of utilities, this eliminates the need for lower-efficiency peaking power plants and over-expansion only to cover maximum peak times. From the point of view of renewable customers, GHPs eliminate the need to buy power from the grid at a high price. This is especially important in hot climates with high cooling loads. When built and operated as distributed generation, GHPs can improve the reliability of power delivery to consumers. The paper discusses the challenges and opportunities as seen during the development and commercialization of two different GHP products; a 10-ton packaged unit and 5-ton split unit.« less

Comparative study on the welded structure fatigue strength assessment method

NASA Astrophysics Data System (ADS)

Hu, Tao

2018-04-01

Due to the welding structure is widely applied in various industries, especially the pressure container, motorcycle, automobile, aviation, ship industry, such as large crane steel structure, so for welded structure fatigue strength evaluation is particularly important. For welded structure fatigue strength evaluation method mainly has four kinds of, the more from the use of two kinds of welded structure fatigue strength evaluation method, namely the nominal stress method and the hot spot stress evaluation method, comparing from its principle, calculation method for the process analysis and research, compare the similarities and the advantages and disadvantages, the analysis of practical engineering problems to provide the reference for every profession and trade, as well as the future welded structure fatigue strength and life evaluation method put forward outlook.

Tradeoffs in Flight Design Upset Mitigation in State of the Art FPGAs: Hardened by Design vs. Design Level Hardening

NASA Technical Reports Server (NTRS)

Swift, Gary M.; Roosta, Ramin

2004-01-01

This presentation compares and contrasts the effectiveness and the system/designer impacts of the two main approaches to upset hardening: the Actel approach (RTSX-S and RTAX-S) of low-level (inside each flip-flop) triplication and the Xilinx approach (Virtex and Virtex2) of design-level triplication of both functional blocks and voters. The effectiveness of these approaches is compared using measurements made in conjunction with each of the FPGAs' manufacturer: for Actel, published data [1] and for Xilinx, recent results from the Xilinx SEE Test Consortium (note that the author is an active and founding member). The impacts involve Actel advantages in the areas of transistor-utilization efficiency and minimizing designer involvement in the triplication while the Xilinx advantages relate to the ability to custom tailor upset hardness and the flexibility of re-configurability. Additionally, there are currently clear Xilinx advantages in available features such as the number of I/O's, logic cells, and RAM blocks as well as speed. However, the advantage of the Actel anti-fuses for configuration over the Xilinx SRAM cells is that the latter need additional functionality and external circuitry (PROMs and, at least a watchdog timer) for configuration and configuration scrubbing. Further, although effectively mitigated if done correctly, the proton upset-ability of the Xilinx FPGAs is a concern in severe proton-rich environments. Ultimately, both manufacturers' upset hardening is limited by SEFI (single-event functional interrupt) rates where it appears the Actel results are better although the Xilinx Virtex2-family result of about one SEFI in 65 device-years in solar-min GCR (the more intense part of the galactic cosmic-ray background) should be acceptable to most missions

Non-oscillatory central differencing for hyperbolic conservation laws

NASA Technical Reports Server (NTRS)

Nessyahu, Haim; Tadmor, Eitan

1988-01-01

Many of the recently developed high resolution schemes for hyperbolic conservation laws are based on upwind differencing. The building block for these schemes is the averaging of an appropriate Godunov solver; its time consuming part involves the field-by-field decomposition which is required in order to identify the direction of the wind. Instead, the use of the more robust Lax-Friedrichs (LxF) solver is proposed. The main advantage is simplicity: no Riemann problems are solved and hence field-by-field decompositions are avoided. The main disadvantage is the excessive numerical viscosity typical to the LxF solver. This is compensated for by using high-resolution MUSCL-type interpolants. Numerical experiments show that the quality of results obtained by such convenient central differencing is comparable with those of the upwind schemes.

Comparative Advantages in Microelectronics,

DTIC Science & Technology

The initial point of departure for analyzing comparative advantages in microelectronics is to make certain explicit assumptions. First, technology...changes conditions but does not determine comparative advantages . Secondly, the entire industrial infrastructure is becoming increasingly abstract...that informatics will profoundly affect the productive infrastructure and the international division of labour.

The dorsomedial prefrontal cortex plays a causal role in mediating in-group advantage in emotion recognition: A TMS study.

PubMed

Gamond, L; Cattaneo, Z

2016-12-01

Consistent evidence suggests that emotional facial expressions are better recognized when the expresser and the perceiver belong to the same social group (in-group advantage). In this study, we used transcranial magnetic stimulation (TMS) to investigate the possible causal involvement of the dorsomedial prefrontal cortex (dmPFC) and of the right temporo-parietal junction (TPJ), two main nodes of the mentalizing neural network, in mediating the in-group advantage in emotion recognition. Participants performed an emotion discrimination task in a minimal (blue/green) group paradigm. We found that interfering with activity in the dmPFC significantly interfered with the effect of minimal group-membership on emotion recognition, reducing participants' ability to discriminate emotions expressed by in-group members. In turn, rTPJ mainly affected emotion discrimination per se, irrespective of group membership. Overall, our results point to a causal role of the dmPFC in mediating the in-group advantage in emotion recognition, favoring intragroup communication. Copyright © 2016 Elsevier Ltd. All rights reserved.

Algal Biomass Analysis by Laser-Based Analytical Techniques—A Review

PubMed Central

Pořízka, Pavel; Prochazková, Petra; Prochazka, David; Sládková, Lucia; Novotný, Jan; Petrilak, Michal; Brada, Michal; Samek, Ota; Pilát, Zdeněk; Zemánek, Pavel; Adam, Vojtěch; Kizek, René; Novotný, Karel; Kaiser, Jozef

2014-01-01

Algal biomass that is represented mainly by commercially grown algal strains has recently found many potential applications in various fields of interest. Its utilization has been found advantageous in the fields of bioremediation, biofuel production and the food industry. This paper reviews recent developments in the analysis of algal biomass with the main focus on the Laser-Induced Breakdown Spectroscopy, Raman spectroscopy, and partly Laser-Ablation Inductively Coupled Plasma techniques. The advantages of the selected laser-based analytical techniques are revealed and their fields of use are discussed in detail. PMID:25251409

Various diffusion magnetic resonance imaging techniques for pancreatic cancer

PubMed Central

Tang, Meng-Yue; Zhang, Xiao-Ming; Chen, Tian-Wu; Huang, Xiao-Hua

2015-01-01

Pancreatic cancer is one of the most common malignant tumors and remains a treatment-refractory cancer with a poor prognosis. Currently, the diagnosis of pancreatic neoplasm depends mainly on imaging and which methods are conducive to detecting small lesions. Compared to the other techniques, magnetic resonance imaging (MRI) has irreplaceable advantages and can provide valuable information unattainable with other noninvasive or minimally invasive imaging techniques. Advances in MR hardware and pulse sequence design have particularly improved the quality and robustness of MRI of the pancreas. Diffusion MR imaging serves as one of the common functional MRI techniques and is the only technique that can be used to reflect the diffusion movement of water molecules in vivo. It is generally known that diffusion properties depend on the characterization of intrinsic features of tissue microdynamics and microstructure. With the improvement of the diffusion models, diffusion MR imaging techniques are increasingly varied, from the simplest and most commonly used technique to the more complex. In this review, the various diffusion MRI techniques for pancreatic cancer are discussed, including conventional diffusion weighted imaging (DWI), multi-b DWI based on intra-voxel incoherent motion theory, diffusion tensor imaging and diffusion kurtosis imaging. The principles, main parameters, advantages and limitations of these techniques, as well as future directions for pancreatic diffusion imaging are also discussed. PMID:26753059

Report on First International Workshop on Robotic Surgery in Thoracic Oncology.

PubMed

Veronesi, Giulia; Cerfolio, Robert; Cingolani, Roberto; Rueckert, Jens C; Soler, Luc; Toker, Alper; Cariboni, Umberto; Bottoni, Edoardo; Fumagalli, Uberto; Melfi, Franca; Milli, Carlo; Novellis, Pierluigi; Voulaz, Emanuele; Alloisio, Marco

2016-01-01

A workshop of experts from France, Germany, Italy, and the United States took place at Humanitas Research Hospital Milan, Italy, on February 10 and 11, 2016, to examine techniques for and applications of robotic surgery to thoracic oncology. The main topics of presentation and discussion were robotic surgery for lung resection; robot-assisted thymectomy; minimally invasive surgery for esophageal cancer; new developments in computer-assisted surgery and medical applications of robots; the challenge of costs; and future clinical research in robotic thoracic surgery. The following article summarizes the main contributions to the workshop. The Workshop consensus was that since video-assisted thoracoscopic surgery (VATS) is becoming the mainstream approach to resectable lung cancer in North America and Europe, robotic surgery for thoracic oncology is likely to be embraced by an increasing numbers of thoracic surgeons, since it has technical advantages over VATS, including intuitive movements, tremor filtration, more degrees of manipulative freedom, motion scaling, and high-definition stereoscopic vision. These advantages may make robotic surgery more accessible than VATS to trainees and experienced surgeons and also lead to expanded indications. However, the high costs of robotic surgery and absence of tactile feedback remain obstacles to widespread dissemination. A prospective multicentric randomized trial (NCT02804893) to compare robotic and VATS approaches to stages I and II lung cancer will start shortly.

Cryobanking of plant species, promise and status

USDA-ARS?s Scientific Manuscript database

Currently, the PAGRP has over 4,000 unique samples of clonally propagated species and about 49,000 seed samples in long-term liquid nitrogen storage. Cryopreservation of plant genetic resources has several advantages over germplasm maintenance in field or in vitro; the main of the advantages are pro...

The art in getting flocks and herds to flerds

USDA-ARS?s Scientific Manuscript database

Flerds (small ruminants that consistently stay near cattle under free-ranging conditions) offer four distinct advantages over stocking simply flocks and herds to carry out mixed species stocking. One of the main advantages flerds offer is added protection from canine predation, reduced time in loca...

Dissolution properties of co-amorphous drug-amino acid formulations in buffer and biorelevant media.

PubMed

Heikkinen, A T; DeClerck, L; Löbmann, K; Grohganz, H; Rades, T; Laitinen, R

2015-07-01

Co-amorphous formulations, particularly binary drug-amino acid mixtures, have been shown to provide enhanced dissolution for poorly-soluble drugs and improved physical stability of the amorphous state. However, to date the dissolution properties (mainly intrinsic dissolution rate) of the co-amorphous formulations have been tested only in buffers and their supersaturation ability remain unexplored. Consequently, dissolution studies in simulated intestinal fluids need to be conducted in order to better evaluate the potential of these systems in increasing the oral bioavailability of biopharmaceutics classification system class II drugs. In this study, solubility and dissolution properties of the co-amorphous simvastatin-lysine, gibenclamide-serine, glibenclamide-threonine and glibenclamide-serine-threonine were studied in phosphate buffer pH 7.2 and biorelevant media (fasted and fed state simulated intestinal fluids (FaSSIF and FeSSIF, respectively)). The co-amorphous formulations were found to provide a long-lasting supersaturation and improve the dissolution of the drugs compared to the crystalline and amorphous drugs alone in buffer. Similar improvement, but in lesser extent, was observed in biorelevant media suggesting that a dissolution advantage observed in aqueous buffers may overestimate the advantage in vivo. However, the results show that, in addition to stability advantage shown earlier, co-amorphous drug-amino acid formulations provide dissolution advantage over crystalline drugs in both aqueous and biorelevant conditions.

Site-Specific Advantages in Skeletal Geometry and Strength at the Proximal Femur and Forearm in Young Female Gymnasts

PubMed Central

Dowthwaite, Jodi N.; Rosenbaum, Paula F.; Scerpella, Tamara A.

2012-01-01

Purpose We evaluated site-specific skeletal adaptation to loading during growth,comparing radius (RAD) and femoral neck (FN) DXA scans in young female gymnasts (GYM) and non-gymnasts (NON). Methods Subjects from an ongoing longitudinal study (8-26 yrs old) underwent annual DXA scans (proximal femur, forearm, total body) and anthropometry, completing maturity and physical activity questionnaires. This cross-sectional analysis used the most recent data meeting the following criteria: gynecological age ≤2.5 yrs post-menarche; GYM annual mean gymnastic exposure ≥5.0 h/wk in the prior year. Bone geometric and strength indices were derived from scans for 173 subjects (8-17 yrs old) via hip structural analysis (femoral narrow neck, NN) and similar radius formulae (1/3 and Ultradistal (UD)). Maturity was coded as M1 (Tanner I breast), M2 (pre-menarche, ≥Tanner II breast) or M3 (post-menarche). ANOVA and chi square compared descriptive data. Two factor ANCOVA adjusted for age, height, total body non-bone lean mass and percent body fat; significance was tested for main effects and interactions between gymnastic exposure and maturity. Results At the distal radius, GYM means were significantly greater than NON means for all variables (p<0.05). At the proximal femur, GYM exhibited narrower periosteal and endosteal dimensions, but greater indices of cortical thickness, BMC, aBMD and section modulus, with lower buckling ratio (p <0.05). However, significant interactions between maturity and loading were detected for the following: 1) FN bone mineral content (BMC), NN buckling ratio (GYM BMC advantages only in M1 and M3; for BMC and buckling ratio, M1 advantages were greatest; 2) 1/3 radius BMC, width, endosteal diameter, cortical cross-sectional area, section modulus (GYM advantages primarily post-menarche); 3) UD radius BMC and axial compressive strength (GYM advantages were larger with greater maturity, greatest post-menarche). Conclusions Maturity-specific comparisons suggested site-specific skeletal adaptation to loading during growth, with greater advantages at the radius versus the proximal femur. At the radius, GYM advantages included greater bone width, cortical cross-sectional area and cortical thickness; in contrast, at the femoral neck, GYM bone tissue cross-sectional area and cortical thickness were greater, but bone width was narrower than in NON. Future longitudinal analyses will evaluate putative maturity-specific differences. PMID:22342799

Advantages and Disadvantages of Health Care Accreditation Mod-els.

PubMed

Tabrizi, Jafar S; Gharibi, Farid; Wilson, Andrew J

2011-01-01

This systematic review seeks to define the general advantages and disadvan-tages of accreditation programs to assist in choosing the most appropriate approach. Systematic search of SID, Ovid Medline & PubMed databases was conducted by the keywords of accreditation, hospital, medical practice, clinic, accreditation models, health care and Persian meanings. From 2379 initial articles, 83 articles met the full inclusion criteria. From initial analysis, 23 attributes were identified which appeared to define advantages and disadvantages of different accreditation approaches and the available systems were compared on these. Six systems were identified in the international literature including the JCAHO from USA, the Canadian program of CCHSA, and the accreditation programs of UK, Australia, New Zealand and France. The main distinguishing attributes among them were: quality improve-ment, patient and staff safety, improving health services integration, public's confi-dence, effectiveness and efficiency of health services, innovation, influence global standards, information management, breadth of activity, history, effective relationship with stakeholders, agreement with AGIL attributes and independence from government. Based on 23 attributes of comprehensive accreditation systems we have defined from a systematic review, the JCAHO accreditation program of USA and then CCHSA of Can-ada offered the most comprehensive systems with the least disadvantages. Other programs such as the ACHS of Australia, ANAES of France, QHNZ of New Zealand and UK accredita-tion programs were fairly comparable according to these criteria. However the decision for any country or health system should be based on an assessment weighing up their specific objec-tives and needs.

Strategic Mergers of Strong Institutions to Enhance Competitive Advantage

ERIC Educational Resources Information Center

Harman, Grant; Harman, Kay

2008-01-01

Strategic mergers are formal combinations or amalgamations of higher education institutions with the aim of enhancing competitive advantage, or merging for "mutual growth". Recently, in a number of countries, there has been a decided shift from mergers initiated by governments, and dealing mainly with "problem" cases, towards…

High-sensitivity fiber optic acoustic sensors

NASA Astrophysics Data System (ADS)

Lu, Ping; Liu, Deming; Liao, Hao

2016-11-01

Due to the overwhelming advantages compared with traditional electronicsensors, fiber-optic acoustic sensors have arisen enormous interest in multiple disciplines. In this paper we present the recent research achievements of our group on fiber-optic acoustic sensors. The main point of our research is high sensitivity interferometric acoustic sensors, including Michelson, Sagnac, and Fabry-Pérot interferometers. In addition, some advanced technologies have been proposed for acoustic or acoustic pressure sensing such as single-mode/multimode fiber coupler, dual FBGs and multi-longitudinal mode fiber laser based acoustic sensors. Moreover, our attention we have also been paid on signal demodulation schemes. The intensity-based quadrature point (Q-point) demodulation, two-wavelength quadrature demodulation and symmetric 3×3 coupler methodare discussed and compared in this paper.

[Stapler and manual bronchial anastomosis--results of a consecutive trial series].

PubMed

Junginger, T; Walgenbach, S; Pichlmaier, H

1989-01-01

After lobectomy and pneumonectomy in experimental evaluations stapled bronchial closures showed the lowest incidence of inflammatory reaction and the highest strength determined by leakage pressure compared with other suture material. A total of 233 lung resections-performed at Surgical University Clinic Köln-Lindenthal and the Clinic for General and Abdominal Surgery of the Johannes-Gutenberg-Universität Mainz--were reviewed. Mechanical stapling reduced the rate of bronchopleural fistulas to 2.0% compared with 7.1% after manual suturing. In parallel, mortality related to bronchial stump leakage decreased to 0.7%. Main advantages of bronchial closure with staplers are the simplicity of their use, the speed and the uniformity of the closure. Thereby stapling devices are valuable completions in pulmonary surgery.

A review of automatic mass detection and segmentation in mammographic images.

PubMed

Oliver, Arnau; Freixenet, Jordi; Martí, Joan; Pérez, Elsa; Pont, Josep; Denton, Erika R E; Zwiggelaar, Reyer

2010-04-01

The aim of this paper is to review existing approaches to the automatic detection and segmentation of masses in mammographic images, highlighting the key-points and main differences between the used strategies. The key objective is to point out the advantages and disadvantages of the various approaches. In contrast with other reviews which only describe and compare different approaches qualitatively, this review also provides a quantitative comparison. The performance of seven mass detection methods is compared using two different mammographic databases: a public digitised database and a local full-field digital database. The results are given in terms of Receiver Operating Characteristic (ROC) and Free-response Receiver Operating Characteristic (FROC) analysis. Copyright 2009 Elsevier B.V. All rights reserved.

Is robotic sacrocolpopexy a marketing gimmick or a technological advancement?

PubMed

Kim, Ja-Hong; Anger, Jennifer T

2010-07-01

Robot-assisted laparoscopic sacrocolpopexy (RALS) is a new surgical technique for the treatment of symptomatic vaginal vault prolapse that is rapidly gaining popularity among both urologists and gynecologists. This article will summarize the available published data to assess the potential advantages and disadvantages of this new procedure and its current role in female pelvic floor reconstruction. The literature on RALS is limited mainly to single-institution retrospective studies, which suggest minimal morbidity, technical feasibility, and short-term efficacy comparable to open abdominal sacrocolpopexy. What remains uncertain is whether this approach will be superior to the other established minimally invasive transvaginal and laparoscopic approaches in terms of subjective and objective outcomes and quality of life. Other relevant issues, such as overall cost-effectiveness and extended application for multicompartment defects and uterine-sparing procedures, remain largely unexplored. The use of RALS will likely continue to expand secondary to increased access and the popularity of the robotic apparatus among both surgeons and patients. Well designed large randomized multicenter comparative studies based on validated measurement instruments are needed to evaluate its advantage over conventional approaches, including open abdominal sacrocolpopexy and various transvaginal and laparoscopic techniques.

Chromatographic methods for determination of S-substituted cysteine derivatives--a comparative study.

PubMed

Kubec, Roman; Dadáková, Eva

2009-10-09

A novel HPLC method for determination of a wide variety of S-substituted cysteine derivatives in Allium species has been developed and validated. This method allows simultaneous separation and quantification of S-alk(en)ylcysteine S-oxides, gamma-glutamyl-S-alk(en)ylcysteines and gamma-glutamyl-S-alk(en)ylcysteine S-oxides in a single run. The procedure is based on extraction of these amino acids and dipeptides by methanol, their derivatization by dansyl chloride and subsequent separation by reversed phase HPLC. The main advantages of the new method are simplicity, excellent stability of derivatives, high sensitivity, specificity and the ability to simultaneously analyze the whole range of S-substituted cysteine derivatives. This method was critically compared with other chromatographic procedures used for quantification of S-substituted cysteine derivatives, namely with two other HPLC methods (derivatization by o-phthaldialdehyde/tert-butylthiol and fluorenylmethyl chloroformate), and with determination by gas chromatography or capillary electrophoresis. Major advantages and drawbacks of these analytical procedures are discussed. Employing these various chromatographic methods, the content and relative proportions of individual S-substituted cysteine derivatives were determined in four most frequently consumed alliaceous vegetables (garlic, onion, shallot, and leek).

Classification by Using Multispectral Point Cloud Data

NASA Astrophysics Data System (ADS)

Liao, C. T.; Huang, H. H.

2012-07-01

Remote sensing images are generally recorded in two-dimensional format containing multispectral information. Also, the semantic information is clearly visualized, which ground features can be better recognized and classified via supervised or unsupervised classification methods easily. Nevertheless, the shortcomings of multispectral images are highly depending on light conditions, and classification results lack of three-dimensional semantic information. On the other hand, LiDAR has become a main technology for acquiring high accuracy point cloud data. The advantages of LiDAR are high data acquisition rate, independent of light conditions and can directly produce three-dimensional coordinates. However, comparing with multispectral images, the disadvantage is multispectral information shortage, which remains a challenge in ground feature classification through massive point cloud data. Consequently, by combining the advantages of both LiDAR and multispectral images, point cloud data with three-dimensional coordinates and multispectral information can produce a integrate solution for point cloud classification. Therefore, this research acquires visible light and near infrared images, via close range photogrammetry, by matching images automatically through free online service for multispectral point cloud generation. Then, one can use three-dimensional affine coordinate transformation to compare the data increment. At last, the given threshold of height and color information is set as threshold in classification.

Crystallization Methods for Preparation of Nanocrystals for Drug Delivery System.

PubMed

Gao, Yuan; Wang, Jingkang; Wang, Yongli; Yin, Qiuxiang; Glennon, Brian; Zhong, Jian; Ouyang, Jinbo; Huang, Xin; Hao, Hongxun

2015-01-01

Low water solubility of drug products causes delivery problems such as low bioavailability. The reduced particle size and increased surface area of nanocrystals lead to the increasing of the dissolution rate. The formulation of drug nanocrystals is a robust approach and has been widely applied to drug delivery system (DDS) due to the significant development of nanoscience and nanotechnology. It can be used to improve drug efficacy, provide targeted delivery and minimize side-effects. Crystallization is the main and efficient unit operation to produce nanocrystals. Both traditional crystallization methods such as reactive crystallization, anti-solvent crystallization and new crystallization methods such as supercritical fluid crystallization, high-gravity controlled precipitation can be used to produce nanocrystals. The current mini-review outlines the main crystallization methods addressed in literature. The advantages and disadvantages of each method were summarized and compared.

Study About Ceiling Design for Main Control Room of NPP with HFE

NASA Astrophysics Data System (ADS)

Gu, Pengfei; Ni, Ying; Chen, Weihua; Chen, Bo; Zhang, Jianbo; Liang, Huihui

Recently since human factor engineering (HFE) has been used in control room design of nuclear power plant (NPP), the human-machine interface (HMI) has been gradual to develop harmoniously, especially the use of the digital technology. Comparing with the analog technology which was used to human-machine interface in the past, human-machine interaction has been more enhanced. HFE and the main control room (MCR) design engineering of NPP is a combination of multidisciplinary cross, mainly related to electrical and instrument control, reactor, machinery, systems engineering and management disciplines. However, MCR is not only equipped with HMI provided by the equipments, but also more important for the operator to provide a work environment, such as the main control room ceiling. The ceiling design of main control room related to HFE which influences the performance of staff should also be considered in the design of the environment and aesthetic factors, especially the introduction of professional design experience and evaluation method. Based on Ling Ao phase II and Hong Yanhe project implementation experience, the study analyzes lighting effect, space partition, vision load about the ceiling of main control room of NPP. Combining with the requirements of standards, the advantages and disadvantages of the main control room ceiling design has been discussed, and considering the requirements of lightweight, noise reduction, fire prevention, moisture protection, the ceiling design solution of the main control room also has been discussed.

Induction Hardening of External Gear

NASA Astrophysics Data System (ADS)

Bukanin, V. A.; Ivanov, A. N.; Zenkov, A. E.; Vologdin, V. V.; Vologdin, V. V., Jr.

2018-03-01

Problems and solution of gear induction hardening are described. Main attention is paid to the parameters of heating and cooling systems. ELTA 7.0 program has been used to obtain the required electrical parameters of inductor, power sources, resonant circuits, as well as to choose the quenching media. Comparison of experimental and calculated results of investigation is provided. In order to compare advantages and disadvantages of single- and dual-frequency heating processes, many variants of these technologies were simulated. The predicted structure and hardness of steel gears are obtained by use of the ELTA data base taken into account the Continuous Cooling Transformation diagrams.

Electric auxiliary power unit for Shuttle evolution

NASA Technical Reports Server (NTRS)

Meyer, Doug; Weber, Kent; Scott, Walter

1989-01-01

The Space Shuttle Orbiter currently uses three hydrazine fueled auxiliary power units (APUs) to provide hydraulic power for the vehicle aerodynamic surface controls, main engine thrust vector control, landing gear, steering, and brakes. Electric auxiliary power units have been proposed as possible replacements to the hydrazine auxiliary power units. Along with the potential advantages, this paper describes an Electric APU configuration and addresses the technical issues and risks associated with the subsystem components. Additionally, characteristics of an Electric APU compared to the existing APU and the direction of future study with respect to the Electric APU is suggested.

Computing Evans functions numerically via boundary-value problems

NASA Astrophysics Data System (ADS)

Barker, Blake; Nguyen, Rose; Sandstede, Björn; Ventura, Nathaniel; Wahl, Colin

2018-03-01

The Evans function has been used extensively to study spectral stability of travelling-wave solutions in spatially extended partial differential equations. To compute Evans functions numerically, several shooting methods have been developed. In this paper, an alternative scheme for the numerical computation of Evans functions is presented that relies on an appropriate boundary-value problem formulation. Convergence of the algorithm is proved, and several examples, including the computation of eigenvalues for a multi-dimensional problem, are given. The main advantage of the scheme proposed here compared with earlier methods is that the scheme is linear and scalable to large problems.

Iris indexing based on local intensity order pattern

NASA Astrophysics Data System (ADS)

Emerich, Simina; Malutan, Raul; Crisan, Septimiu; Lefkovits, Laszlo

2017-03-01

In recent years, iris biometric systems have increased in popularity and have been proven that are capable of handling large-scale databases. The main advantage of these systems is accuracy and reliability. A proper iris patterns classification is expected to reduce the matching time in huge databases. This paper presents an iris indexing technique based on Local Intensity Order Pattern. The performance of the present approach is evaluated on UPOL database and is compared with other recent systems designed for iris indexing. The results illustrate the potential of the proposed method for large scale iris identification.

Density matrix renormalization group for a highly degenerate quantum system: Sliding environment block approach

NASA Astrophysics Data System (ADS)

Schmitteckert, Peter

2018-04-01

We present an infinite lattice density matrix renormalization group sweeping procedure which can be used as a replacement for the standard infinite lattice blocking schemes. Although the scheme is generally applicable to any system, its main advantages are the correct representation of commensurability issues and the treatment of degenerate systems. As an example we apply the method to a spin chain featuring a highly degenerate ground-state space where the new sweeping scheme provides an increase in performance as well as accuracy by many orders of magnitude compared to a recently published work.

Universities and the Mobilization of Claims of Excellence for Competitive Advantage

ERIC Educational Resources Information Center

Wangenge-Ouma, Gerald; Langa, Patricio V.

2010-01-01

This study discusses the phenomenon of making claims of excellence by universities, which we interpret as a response, inter alia, to the hitherto unfamiliar context of scarce and diminishing resources. The main objective is to understand how claims of excellence are mobilised by higher education institutions to achieve "competitive advantage". The…

Advantages of Social Network Analysis in Educational Research

ERIC Educational Resources Information Center

Ushakov, K. M.; Kukso, K. N.

2015-01-01

Currently one of the main tools for the large scale studies of schools is statistical analysis. Although it is the most common method and it offers greatest opportunities for analysis, there are other quantitative methods for studying schools, such as network analysis. We discuss the potential advantages that network analysis has for educational…

Life cycle cost of a hybrid forward osmosis - low pressure reverse osmosis system for seawater desalination and wastewater recovery.

PubMed

Valladares Linares, R; Li, Z; Yangali-Quintanilla, V; Ghaffour, N; Amy, G; Leiknes, T; Vrouwenvelder, J S

2016-01-01

In recent years, forward osmosis (FO) hybrid membrane systems have been investigated as an alternative to conventional high-pressure membrane processes (i.e. reverse osmosis (RO)) for seawater desalination and wastewater treatment and recovery. Nevertheless, their economic advantage in comparison to conventional processes for seawater desalination and municipal wastewater treatment has not been clearly addressed. This work presents a detailed economic analysis on capital and operational expenses (CAPEX and OPEX) for: i) a hybrid forward osmosis - low-pressure reverse osmosis (FO-LPRO) process, ii) a conventional seawater reverse osmosis (SWRO) desalination process, and iii) a membrane bioreactor - reverse osmosis - advanced oxidation process (MBR-RO-AOP) for wastewater treatment and reuse. The most important variables affecting economic feasibility are obtained through a sensitivity analysis of a hybrid FO-LPRO system. The main parameters taken into account for the life cycle costs are the water quality characteristics (similar feed water and similar water produced), production capacity of 100,000 m(3) d(-1) of potable water, energy consumption, materials, maintenance, operation, RO and FO module costs, and chemicals. Compared to SWRO, the FO-LPRO systems have a 21% higher CAPEX and a 56% lower OPEX due to savings in energy consumption and fouling control. In terms of the total water cost per cubic meter of water produced, the hybrid FO-LPRO desalination system has a 16% cost reduction compared to the benchmark for desalination, mainly SWRO. Compared to the MBR-RO-AOP, the FO-LPRO systems have a 7% lower CAPEX and 9% higher OPEX, resulting in no significant cost reduction per m(3) produced by FO-LPRO. Hybrid FO-LPRO membrane systems are shown to have an economic advantage compared to current available technology for desalination, and comparable costs with a wastewater treatment and recovery system. Based on development on FO membrane modules, packing density, and water permeability, the total water cost could be further reduced. Copyright © 2015 Elsevier Ltd. All rights reserved.

Analysis of Tobyhanna Army Depot’s Radio Frequency Identification (RFID) Pilot Program: RFID as an Asset Management Tool

DTIC Science & Technology

2005-06-01

each has advantages and disadvantages. 1. Active Tags The main difference between the two types of RFID tags is that active tags have an internal...battery source and passive tags do not. The advantage of the active tag is that it transmits its own signal, which increases the read range of the...applications provide a stand-alone solution that employs a specific usage application of RFID and has clear economic advantages over supply chain

Analysis And Assistant Planning System Ofregional Agricultural Economic Inform

NASA Astrophysics Data System (ADS)

Han, Jie; Zhang, Junfeng

For the common problems existed in regional development and planning, we try to design a decision support system for assisting regional agricultural development and alignment as a decision-making tool for local government and decision maker. The analysis methods of forecast, comparative advantage, liner programming and statistical analysis are adopted. According to comparative advantage theory, the regional advantage can be determined by calculating and comparing yield advantage index (YAI), Scale advantage index (SAI), Complicated advantage index (CAI). Combining with GIS, agricultural data are presented as a form of graph such as area, bar and pie to uncover the principle and trend for decision-making which can't be found in data table. This system provides assistant decisions for agricultural structure adjustment, agro-forestry development and planning, and can be integrated to information technologies such as RS, AI and so on.

THE HOME ADVANTAGE IN MAJOR LEAGUE BASEBALL.

PubMed

Jones, Marshall B

2015-12-01

Home advantage is smaller in baseball than in other major professional sports for men, specifically football, basketball, or soccer. This paper advances an explanation. It begins by reviewing the main observations to support the view that there is little or no home advantage in individual sports. It then presents the case that home advantage originates in impaired teamwork among the away players. The need for teamwork and the extent of it vary from sport to sport. To the extent that a sport requires little teamwork it is more like an individual sport, and the home team would be expected to enjoy only a small advantage. Interactions among players on the same side (teamwork) are much less common in baseball than in the other sports considered.

Applications of rapid prototyping technology in maxillofacial prosthetics.

PubMed

Sykes, Leanne M; Parrott, Andrew M; Owen, C Peter; Snaddon, Donald R

2004-01-01

The purpose of this study was to compare the accuracy, required time, and potential advantages of rapid prototyping technology with traditional methods in the manufacture of wax patterns for two facial prostheses. Two clinical situations were investigated: the production of an auricular prosthesis and the duplication of an existing maxillary prosthesis, using a conventional and a rapid prototyping method for each. Conventional wax patterns were created from impressions taken of a patient's remaining ear and an oral prosthesis. For the rapid prototyping method, a cast of the ear and the original maxillary prosthesis were scanned, and rapid prototyping was used to construct the wax patterns. For the auricular prosthesis, both patterns were refined clinically and then flasked and processed in silicone using routine procedures. Twenty-six independent observers evaluated these patterns by comparing them to the cast of the patient's remaining ear. For the duplication procedure, both wax patterns were scanned and compared to scans of the original prosthesis by generating color error maps to highlight volumetric changes. There was a significant difference in opinions for the two auricular prostheses with regard to shape and esthetic appeal, where the hand-carved prosthesis was found to be of poorer quality. The color error maps showed higher errors with the conventional duplication process compared with the rapid prototyping method. The main advantage of rapid prototyping is the ability to produce physical models using digital methods instead of traditional impression techniques. The disadvantage of equipment costs could be overcome by establishing a centralized service.

Recent advances in aptasensors based on graphene and graphene-like nanomaterials.

PubMed

Ping, Jianfeng; Zhou, Yubin; Wu, Yuanyuan; Papper, Vladislav; Boujday, Souhir; Marks, Robert S; Steele, Terry W J

2015-02-15

Graphene and graphene-like two-dimensional nanomaterials have aroused tremendous research interest in recent years due to their unique electronic, optical, and mechanical properties associated with their planar structure. Aptamers have exhibited many advantages as molecular recognition elements for sensing devices compared to traditional antibodies. The marriage of two-dimensional nanomaterials and aptamers has emerged many ingenious aptasensing strategies for applications in the fields of clinical diagnosis and food safety. This review highlights current advances in the development and application of two-dimensional nanomaterials-based aptasensors with the focus on two main signal-transducing mechanisms, i.e. electrochemical and optical. A special attention is paid to graphene, a one-atom thick layer of graphite with exceptional properties, representing a fastgrowing field of research. In view of the unique properties of two-dimensional nanostructures and their inherent advantages of synthetic aptamers, we expect that high-performance two-dimensional nanomaterials-based aptasensing devices will find extensive applications in environmental monitoring, biomedical diagnostics, and food safety. Copyright © 2014 Elsevier B.V. All rights reserved.

Quantitative real-time single particle analysis of virions.

PubMed

Heider, Susanne; Metzner, Christoph

2014-08-01

Providing information about single virus particles has for a long time been mainly the domain of electron microscopy. More recently, technologies have been developed-or adapted from other fields, such as nanotechnology-to allow for the real-time quantification of physical virion particles, while supplying additional information such as particle diameter concomitantly. These technologies have progressed to the stage of commercialization increasing the speed of viral titer measurements from hours to minutes, thus providing a significant advantage for many aspects of virology research and biotechnology applications. Additional advantages lie in the broad spectrum of virus species that may be measured and the possibility to determine the ratio of infectious to total particles. A series of disadvantages remain associated with these technologies, such as a low specificity for viral particles. In this review we will discuss these technologies by comparing four systems for real-time single virus particle analysis and quantification. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Polycapillary based μXRF station for 3D colour tomography

NASA Astrophysics Data System (ADS)

Hampai, D.; Cherepennikov, Yu. M.; Liedl, A.; Cappuccio, G.; Capitolo, E.; Iannarelli, M.; Azzutti, C.; Gladkikh, Yu. P.; Marcelli, A.; Dabagov, S. B.

2018-04-01

The "Rainbow X-Ray" (RXR) experimental station at XLab Frascati of the Frascati's National Laboratories (LNF) INFN is a dedicated station for X-ray fluorescence studies based on the use of polycapillary lenses in a confocal geometry. The flexible RXR layout allows investigating specimens of the dimensions ranging from several millimeters up to half meter and weighting up to several tens of kilograms. Compared to similar existing XRF stations, apart of the possibility for investigating large samples, the main advantage of this equipment is the detection system with two spectrometers optimized to work separately at high and at low X-ray energies. The confocal geometry combined with a 3-axes fine motion system makes possible 3D μXRF elemental tomographic acquisitions (colour tomography). At present this station in operation at high XRF energies is used for cultural heritage and geological applications. We present and discuss here the analytical performances of this experimental station pointing out the advantages in different application areas.

Fragmentation of Newtonian and viscoelastic liquids during rotary atomization

NASA Astrophysics Data System (ADS)

Keshavarz, Bavand; Moore, John; Houze, Eric; Koerner, Michael; McKinley, Gareth; MIT Collaboration; Axalta Coating Systems Collaboration

2015-11-01

Animals drying their wet fur by rapidly shaking their body and rotary atomization in paint coating are just a few examples in which centripetal acceleration is used to disintegrate liquid films into smaller fragments. Narrower size distributions and well-defined geometrical fluid pathlines (similar to the involute of a circle) are the main advantages of this type of atomization as compared to air-assisted atomization. Despite these inherent advantages there is a paucity of fundamental knowledge about the roles of fluid rheology in this process. We study the effects of viscosity by performing rotary atomization tests on silicone oils with a wide range of viscosities (1-1000 mPa.s). Viscoelastic effects are also probed by spraying solutions of polyethylene oxide (PEO) dissolved in water at different concentrations. Our results show that understanding the effects of liquid properties on the instabilities that control rotary atomization (primarily Rayleigh-Taylor instability during the ligament formation followed by Rayleigh-Plateau instability during droplet pinch-off) can help us understand the resulting fragment size distributions.

Automated EEG artifact elimination by applying machine learning algorithms to ICA-based features

NASA Astrophysics Data System (ADS)

Radüntz, Thea; Scouten, Jon; Hochmuth, Olaf; Meffert, Beate

2017-08-01

Objective. Biological and non-biological artifacts cause severe problems when dealing with electroencephalogram (EEG) recordings. Independent component analysis (ICA) is a widely used method for eliminating various artifacts from recordings. However, evaluating and classifying the calculated independent components (IC) as artifact or EEG is not fully automated at present. Approach. In this study, we propose a new approach for automated artifact elimination, which applies machine learning algorithms to ICA-based features. Main results. We compared the performance of our classifiers with the visual classification results given by experts. The best result with an accuracy rate of 95% was achieved using features obtained by range filtering of the topoplots and IC power spectra combined with an artificial neural network. Significance. Compared with the existing automated solutions, our proposed method is not limited to specific types of artifacts, electrode configurations, or number of EEG channels. The main advantages of the proposed method is that it provides an automatic, reliable, real-time capable, and practical tool, which avoids the need for the time-consuming manual selection of ICs during artifact removal.

Preliminary structural design of composite main rotor blades for minimum weight

NASA Technical Reports Server (NTRS)

Nixon, Mark W.

1987-01-01

A methodology is developed to perform minimum weight structural design for composite or metallic main rotor blades subject to aerodynamic performance, material strength, autorotation, and frequency constraints. The constraints and load cases are developed such that the final preliminary rotor design will satisfy U.S. Army military specifications, as well as take advantage of the versatility of composite materials. A minimum weight design is first developed subject to satisfying the aerodynamic performance, strength, and autorotation constraints for all static load cases. The minimum weight design is then dynamically tuned to avoid resonant frequencies occurring at the design rotor speed. With this methodology, three rotor blade designs were developed based on the geometry of the UH-60A Black Hawk titanium-spar rotor blade. The first design is of a single titanium-spar cross section, which is compared with the UH-60A Black Hawk rotor blade. The second and third designs use single and multiple graphite/epoxy-spar cross sections. These are compared with the titanium-spar design to demonstrate weight savings from use of this design methodology in conjunction with advanced composite materials.

Operational impact of using a vanadate oxidase method for direct bilirubin measurements at an academic medical center clinical laboratory.

PubMed

Dhungana, Neha; Morris, Cory; Krasowski, Matthew D

2017-08-01

The aim of this study was to compare the operational impact of using vanadate oxidase versus diazo direct bilirubin assays for an academic medical center patient population. Retrospective study was done over an approximately 3.5 year period. The main automated chemistry instrumentation was a Roche Diagnostics cobas 8000 line. The Roche Direct Bilirubin assay was compared to Diazyme Laboratories Direct Bilirubin Assay and Randox Laboratories Direct Bilirubin assay using manufacturer's guidelines for hemolysis index, lipemia index, and analytical measurement range (AMR). Retrospective data was analyzed for 47,333 serum/plasma specimens that had clinical orders for direct bilirubin. A total of 5943 specimens (12.6%) exceeded the hemolysis index limit for the Roche method compared to only 0.2% and 0.05% of specimens for the Diazyme and Randox methods, respectively. The impact was particularly large on patients less than 2 years old, for which 51.3% of specimens exceeded the hemolysis index for the Roche method. A total of 1671 specimens (3.5%) exceeded the lipemia index limit for the Roche method compared to less than 0.1% for the Randox method. Lastly, 988 (2.1%) of specimens had direct bilirubin concentrations exceeding the upper AMR limit of 10 mg/dL [171 µmol/L] for the Roche assay compared to less than 1% of specimens for the vanadate oxidase methods. Vanadate oxidase direct bilirubin methods offer advantages over diazo methods in terms of less interference by hemolysis and lipemia, as well as wider AMR. The advantages are particularly evident for neonatal and infant populations.

An Item-Driven Adaptive Design for Calibrating Pretest Items. Research Report. ETS RR-14-38

ERIC Educational Resources Information Center

Ali, Usama S.; Chang, Hua-Hua

2014-01-01

Adaptive testing is advantageous in that it provides more efficient ability estimates with fewer items than linear testing does. Item-driven adaptive pretesting may also offer similar advantages, and verification of such a hypothesis about item calibration was the main objective of this study. A suitability index (SI) was introduced to adaptively…

Effects of Virtual Education on Academic Culture: Perceived Advantages and Disadvantages

ERIC Educational Resources Information Center

Jefferson, Renee N.; Arnold, Liz W.

2009-01-01

The perceived advantages and disadvantages of courses taught in online and face-to-face learning environments were explored for students taking an accounting and a data collection and analysis course. Both courses were taught in a face-to-face learning environment at the main or satellite campus. It was hypothesized that there would be…

Comparison of costs for three hypothetical alternative kitchen waste management systems.

PubMed

Schiettecatte, Wim; Tize, Ronald; De Wever, Heleen

2014-11-01

Urban water and waste management continues to be a major challenge, with the Earth's population projected to rise to 9 billion by 2050, with 70% of this population expected to live in cities. A combined treatment of wastewater and the organic fraction of municipal solid waste offers opportunities for improved environmental protection and energy recovery, but the collection and transport of organic wastes must be cost effective. This study compares three alternative kitchen waste collection and transportation systems for a virtual modern urban area with 300,000 residents and a population density of 10,000 persons per square kilometre. Door-to-door collection, being the standard practice in modern urban centres, remains the most economically advantageous at a cost of 263 euros per tonne of kitchen waste. Important drawbacks are the difficult logistics, increased city traffic, air and noise pollution. The quieter, cleaner and more hygienic vacuum transport of kitchen waste comes with a higher cost of 367 euros per tonne, mainly resulting from a higher initial investment cost for the system installation. The third option includes the well-known use of under-sink food waste disposers (often called garbage grinders) that are connected to the kitchen's wastewater piping system, with a total yearly cost of 392 euros per tonne. Important advantages with this system are the clean operation and the current availability of a city-wide sewage conveyance pipeline system. Further research is recommended, for instance the application of a life cycle assessment approach, to more fully compare the advantages and disadvantages of each option. © The Author(s) 2014.

Advantages and Disadvantages of Health Care Accreditation Mod­els

PubMed Central

Tabrizi, Jafar S.; Gharibi, Farid; Wilson, Andrew J.

2011-01-01

Background: This systematic review seeks to define the general advantages and disadvan­tages of accreditation programs to assist in choosing the most appropriate approach. Method: Systematic search of SID, Ovid Medline & PubMed databases was conducted by the keywords of accreditation, hospital, medical practice, clinic, accreditation models, health care and Persian meanings. From 2379 initial articles, 83 articles met the full inclusion criteria. From initial analysis, 23 attributes were identified which appeared to define advantages and disadvantages of different accreditation approaches and the available systems were compared on these. Results: Six systems were identified in the international literature including the JCAHO from USA, the Canadian program of CCHSA, and the accreditation programs of UK, Australia, New Zealand and France. The main distinguishing attributes among them were: quality improve­ment, patient and staff safety, improving health services integration, public’s confi­dence, effectiveness and efficiency of health services, innovation, influence global standards, information management, breadth of activity, history, effective relationship with stakeholders, agreement with AGIL attributes and independence from government. Conclusion: Based on 23 attributes of comprehensive accreditation systems we have defined from a systematic review, the JCAHO accreditation program of USA and then CCHSA of Can­ada offered the most comprehensive systems with the least disadvantages. Other programs such as the ACHS of Australia, ANAES of France, QHNZ of New Zealand and UK accredita­tion programs were fairly comparable according to these criteria. However the decision for any country or health system should be based on an assessment weighing up their specific objec­tives and needs. PMID:24688896

LASIK vs LASEK vs PRK: advantages and indications.

PubMed

Ambrósio, Renato; Wilson, Steven

2003-03-01

The advent of the excimer laser as an instrument for use in reshaping the corneal stroma was a great step forward in refractive surgery. Laser energy can be delivered on the stromal surface in the photorefractive keratectomy (PRK) procedure or deeper on the corneal stroma by the means of a lamellar surgery in which a flap is created with the microkeratome in the laser in situ keratomileusis (LASIK) procedure. LASIK is currently the dominant procedure in refractive surgery. The main advantage of LASIK over PRK is related to maintaining the central corneal epithelium. This increases comfort during the early post-operative period, allows for rapid visual recovery, and reduces the wound healing response. Reduced wound healing correlates with less regression for high corrections and a lower rate of complications such as significant stromal opacity (haze). PRK, however, remains as an excellent option for mild to moderate corrections, particularly for cases associated with thin corneas, recurrent erosions, or a predisposition for trauma (Martial arts, military, etc.). Recently, a modification of PRK, laser subepithelial keratomileusis (LASEK), was introduced. In the LASEK procedure, an epithelial flap is created and replaced after the ablation. The benefits, if any, of the creation of an epithelial flap compared to traditional PRK are not fully appreciated. Advocates of LASEK suggest that there is less discomfort in the early postoperative period, faster visual recovery, and less haze compared to standard PRK for correction of similar levels of refractive error. Additional long-term clinical studies, along with laboratory research, will be crucial to validate these potential advantages of LASEK procedure.

[Risk Management: concepts and chances for public health].

PubMed

Palm, Stefan; Cardeneo, Margareta; Halber, Marco; Schrappe, Matthias

2002-01-15

Errors are a common problem in medicine and occur as a result of a complex process involving many contributing factors. Medical errors significantly reduce the safety margin for the patient and contribute additional costs in health care delivery. In most cases adverse events cannot be attributed to a single underlying cause. Therefore an effective risk management strategy must follow a system approach, which is based on counting and analysis of near misses. The development of defenses against the undesired effects of errors should be the main focus rather than asking the question "Who blundered?". Analysis of near misses (which in this context can be compared to indicators) offers several methodological advantages as compared to the analysis of errors and adverse events. Risk management is an integral element of quality management.

Short genome report of cellulose-producing commensal Escherichia coli 1094.

PubMed

Bernal-Bayard, Joaquin; Gomez-Valero, Laura; Wessel, Aimee; Khanna, Varun; Bouchier, Christiane; Ghigo, Jean-Marc

2018-01-01

Bacterial surface colonization and biofilm formation often rely on the production of an extracellular polymeric matrix that mediates cell-cell and cell-surface contacts. In Escherichia coli and many Betaproteobacteria and Gammaproteobacteria cellulose is often the main component of the extracellular matrix. Here we report the complete genome sequence of the cellulose producing strain E. coli 1094 and compare it with five other closely related genomes within E. coli phylogenetic group A. We present a comparative analysis of the regions encoding genes responsible for cellulose biosynthesis and discuss the changes that could have led to the loss of this important adaptive advantage in several E. coli strains. Data deposition: The annotated genome sequence has been deposited at the European Nucleotide Archive under the accession number PRJEB21000.

Research of an optimization design method of integral imaging three-dimensional display system

NASA Astrophysics Data System (ADS)

Gao, Hui; Yan, Zhiqiang; Wen, Jun; Jiang, Guanwu

2016-03-01

The information warfare needs a highly transparent environment of battlefield, it follows that true three-dimensional display technology has obvious advantages than traditional display technology in the current field of military science and technology. It also focuses on the research progress of lens array imaging technology and aims at what restrict the development of integral imaging, main including low spatial resolution, narrow depth range and small viewing angle. This paper summarizes the principle, characteristics and development history of the integral imaging. A variety of methods are compared and analyzed that how to improve the resolution, extend depth of field, increase scope and eliminate the artifact aiming at problems currently. And makes a discussion about the experimental results of the research, comparing the display performance of different methods.

Possibilities and limitations of current stereo-endoscopy.

PubMed

Mueller-Richter, U D A; Limberger, A; Weber, P; Ruprecht, K W; Spitzer, W; Schilling, M

2004-06-01

Stereo-endoscopy has become a commonly used technology. In many comparative studies striking advantages of stereo-endoscopy over two-dimensional presentation could not be proven. To show the potential and fields for further improvement of this technology is the aim of this article. The physiological basis of three-dimensional vision limitations of current stereo-endoscopes is discussed and fields for further research are indicated. New developments in spatial picture acquisition and spatial picture presentation are discussed. Current limitations of stereo-endoscopy that prevent a better ranking in comparative studies with two-dimensional presentation are mainly based on insufficient picture acquisition. Devices for three-dimensional picture presentation are at a more advanced developmental stage than devices for three-dimensional picture acquisition. Further research should emphasize the development of new devices for three-dimensional picture acquisition.

Advantages and limits of hemorrhoidal dearterialization in the treatment of symptomatic hemorrhoids

PubMed Central

Giamundo, Paolo

2016-01-01

In the last two decades, hemorrhoidal dearterialization has become universally accepted as a treatment option for symptomatic hemorrhoids. The rationale for this procedure is based on the assumption that arterial blood overflow is mainly responsible for dilatation of the hemorrhoidal plexus due to the absence of capillary interposition between the arterial and venous systems within the anal canal. Dearterialization, with either suture ligation (Doppler-guided hemorrhoid artery ligation/transanal hemorrhoidal dearterialization) or laser (hemorrhoidal laser procedure), may be successfully performed alone or with mucopexy. Although the added value of Doppler-guidance in association with dearterialization has recently been challenged, this imaging method still plays an important role in localizing hemorrhoidal arteries and, therefore, minimizing the effect of anatomic variation among patients. However, it is important to employ the correct Doppler transducer. Some Doppler transducers may not easily detect superficial arteries due to inadequate frequency settings. All techniques of dearterialization have the advantage of preserving the anatomy and physiology of the anal canal, when compared to other surgical treatments for hemorrhoids. This advantage cannot be underestimated as impaired anal function, including fecal incontinence and other defecation disorders, may occur following surgical treatment for hemorrhoids. Furthermore, this potentially devastating problem can occur in patients of all ages, including younger patients. PMID:26843909

Advantages and limits of hemorrhoidal dearterialization in the treatment of symptomatic hemorrhoids.

PubMed

Giamundo, Paolo

2016-01-27

In the last two decades, hemorrhoidal dearterialization has become universally accepted as a treatment option for symptomatic hemorrhoids. The rationale for this procedure is based on the assumption that arterial blood overflow is mainly responsible for dilatation of the hemorrhoidal plexus due to the absence of capillary interposition between the arterial and venous systems within the anal canal. Dearterialization, with either suture ligation (Doppler-guided hemorrhoid artery ligation/transanal hemorrhoidal dearterialization) or laser (hemorrhoidal laser procedure), may be successfully performed alone or with mucopexy. Although the added value of Doppler-guidance in association with dearterialization has recently been challenged, this imaging method still plays an important role in localizing hemorrhoidal arteries and, therefore, minimizing the effect of anatomic variation among patients. However, it is important to employ the correct Doppler transducer. Some Doppler transducers may not easily detect superficial arteries due to inadequate frequency settings. All techniques of dearterialization have the advantage of preserving the anatomy and physiology of the anal canal, when compared to other surgical treatments for hemorrhoids. This advantage cannot be underestimated as impaired anal function, including fecal incontinence and other defecation disorders, may occur following surgical treatment for hemorrhoids. Furthermore, this potentially devastating problem can occur in patients of all ages, including younger patients.

Defining equity in health.

PubMed

Braveman, P; Gruskin, S

2003-04-01

To propose a definition of health equity to guide operationalisation and measurement, and to discuss the practical importance of clarity in defining this concept. Conceptual discussion. Setting, Patients/Participants, and Main results: not applicable. For the purposes of measurement and operationalisation, equity in health is the absence of systematic disparities in health (or in the major social determinants of health) between groups with different levels of underlying social advantage/disadvantage-that is, wealth, power, or prestige. Inequities in health systematically put groups of people who are already socially disadvantaged (for example, by virtue of being poor, female, and/or members of a disenfranchised racial, ethnic, or religious group) at further disadvantage with respect to their health; health is essential to wellbeing and to overcoming other effects of social disadvantage. Equity is an ethical principle; it also is consonant with and closely related to human rights principles. The proposed definition of equity supports operationalisation of the right to the highest attainable standard of health as indicated by the health status of the most socially advantaged group. Assessing health equity requires comparing health and its social determinants between more and less advantaged social groups. These comparisons are essential to assess whether national and international policies are leading toward or away from greater social justice in health.

Quantitative impact characterization of aeronautical CFRP materials with non-destructive testing methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiefel, Denis, E-mail: Denis.Kiefel@airbus.com, E-mail: Rainer.Stoessel@airbus.com; Stoessel, Rainer, E-mail: Denis.Kiefel@airbus.com, E-mail: Rainer.Stoessel@airbus.com; Grosse, Christian, E-mail: Grosse@tum.de

2015-03-31

In recent years, an increasing number of safety-relevant structures are designed and manufactured from carbon fiber reinforced polymers (CFRP) in order to reduce weight of airplanes by taking the advantage of their specific strength into account. Non-destructive testing (NDT) methods for quantitative defect analysis of damages are liquid- or air-coupled ultrasonic testing (UT), phased array ultrasonic techniques, and active thermography (IR). The advantage of these testing methods is the applicability on large areas. However, their quantitative information is often limited on impact localization and size. In addition to these techniques, Airbus Group Innovations operates a micro x-ray computed tomography (μ-XCT)more » system, which was developed for CFRP characterization. It is an open system which allows different kinds of acquisition, reconstruction, and data evaluation. One main advantage of this μ-XCT system is its high resolution with 3-dimensional analysis and visualization opportunities, which enables to gain important quantitative information for composite part design and stress analysis. Within this study, different NDT methods will be compared at CFRP samples with specified artificial impact damages. The results can be used to select the most suitable NDT-method for specific application cases. Furthermore, novel evaluation and visualization methods for impact analyzes are developed and will be presented.« less

Quasi-Static and Dynamic Response Characteristics of F-4 Bias-Ply and Radial-Belted Main Gear Tires

NASA Technical Reports Server (NTRS)

Davis, Pamela A.

1997-01-01

An investigation was conducted at Langley Research Center to determine the quasi-static and dynamic response characteristics of F-4 military fighter 30x11.5-14.5/26PR bias-ply and radial-belted main gear tires. Tire properties were measured by the application of vertical, lateral, and fore-and-aft loads. Mass moment-of-inertia data were also obtained. The results of the study include quasi-static load-deflection curves, free-vibration time-history plots, energy loss associated with hysteresis, stiffness and damping characteristics, footprint geometry, and inertia properties of each type of tire. The difference between bias-ply and radial-belted tire construction is given, as well as the advantages and disadvantages of each tire design. Three simple damping models representing viscous, structural, and Coulomb friction are presented and compared with the experimental data. The conclusions discussed contain a summary of test observations.

Feasibility basis for use of new solid household waste processing equipment

NASA Astrophysics Data System (ADS)

Vertakova, Y. V.; Zvyagintsev, G. L.; Babich, T. N.; Polozhentseva, Y. S.

2017-10-01

Economic efficiency assessment of innovative organizational project of solid household waste processing enterprise (SHW) is given. A distinctive feature of this project is new mining and chemical technology use of waste depolymerization. The proved feature is fuel-resource production in portion modules of tubular type. They are patented and approved under laboratory conditions. The main ways of SHW processing in the world including Russia are described. Advantages and disadvantages are revealed. Comparative analysis is carried out. Technology prioritization is a result of this analysis. During organization of such enterprise, it was proved that not only SHW processing is a result of its functioning. The other result is environmentally friendly production using secondary raw materials. These products can be sold and can have bring income. Main investment and current expenses necessary for the offered project implementation are defined. This allows making economic assessment of innovative enterprise efficiency.

Numerical simulation of mechanical properties tests of tungsten mud waste geopolymer

NASA Astrophysics Data System (ADS)

Paszek, Natalia; Krystek, Małgorzata

2018-03-01

Geopolymers are believed to become in the future an environmental friendly alternative for the concrete. The low CO2 emission during the production process and the possibility of ecological management of the industrial wastes are mentioned as main advantages of geopolymers. The main drawback, causing problems with application of geopolymers as a building material is the lack of the theoretical material model. Indicated problem is being solved now by the group of scientists from the Silesian University of Technology. The series of laboratory tests are carried out within the European research project REMINE. The paper introduces the numerical analyses of tungsten mud waste geopolymer samples which have been performed in the Atena software on the basis of the laboratory tests. Numerical models of bended and compressed samples of different shapes are presented in the paper. The results obtained in Atena software were compared with results obtained in Abaqus and Mafem3D software.

Spectrofluorimetric determination of 3-methylflavone-8-carboxylic acid, the main active metabolite of flavoxate hydrochloride in human urine.

PubMed

Zaazaa, Hala E; Mohamed, Afaf O; Hawwam, Maha A; Abdelkawy, Mohamed

2015-01-05

A simple, sensitive and selective spectrofluorimetric method has been developed for the determination of 3-methylflavone-8-carboxylic acid as the main active metabolite of flavoxate hydrochloride in human urine. The proposed method was based on the measurement of the native fluorescence of the metabolite in methanol at an emission wavelength 390 nm, upon excitation at 338 nm. Moreover, the urinary excretion pattern has been calculated using the proposed method. Taking the advantage that 3-methylflavone-8-carboxylic acid is also the alkaline degradate, the proposed method was applied to in vitro determination of flavoxate hydrochloride in tablets dosage form via the measurement of its corresponding degradate. The method was validated in accordance with the ICH requirements and statistically compared to the official method with no significant difference in performance. Copyright © 2014 Elsevier B.V. All rights reserved.

It was/wasn't everything I had imagined: advantages and disadvantages after kidney transplantation.

PubMed

Santos, Bianca Pozza Dos; Viegas, Aline da Costa; Feijó, Aline Machado; Lise, Fernanda; Schwartz, Eda

2016-10-31

To know the advantages and difficulties that people with chronic kidney disease experience after renal transplantation. A qualitative and descriptive study with 20 kidney transplant patients in a city in Southern Brazil, from May to July of 2013. Semi-structured interviews were used, analyzed according to the critical incident technique. The main advantages were presented in the similarity to "normal" living: advantages resulting from the kidney transplant category, related to the patient's discharge from dialysis, food and water restriction, among others. The difficulties were presented in the permanent chronic condition and the need for care category. The advantages and disadvantages depend on each person's experience. The health professionals need to understand and promote health actions that promote the uniqueness and context of renal transplant.

Aviation Logistics in U.S. Pacific Command: A Cost-Based Analysis and Comparative Advantage to Commercial Shipment

DTIC Science & Technology

2012-11-20

pbofbp= Aviation Logistics in U.S. Pacific Command: A Cost- Based Analysis and Comparative Advantage to Commercial Shipment 20 November 2012...AND SUBTITLE Aviation Logistics in U.S. Pacific Command: A Cost- Based Analysis and Comparative Advantage to Commercial Shipment 5a. CONTRACT NUMBER...asset throughput in the customs departments of our allied nations. In considering and analyzing these dynamics, this study provides a cost- based

Surgical approach to right colon cancer: From open technique to robot. State of art

PubMed Central

Fabozzi, Massimiliano; Cirillo, Pia; Corcione, Francesco

2016-01-01

This work is a topic highlight on the surgical treatment of the right colon pathologies, focusing on the literature state of art and comparing the open surgery to the different laparoscopic and robotic procedures. Different laparoscopic procedures have been described for the treatment of right colon tumors: Totally laparoscopic right colectomy, laparoscopic assisted right colectomy, laparoscopic facilitated right colectomy, hand-assisted right colectomy, single incision laparoscopic surgery colectomy, robotic right colectomy. Two main characteristics of these techniques are the different type of anastomosis: Intracorporeal (for totally laparoscopic right colectomy, single incision laparoscopic surgery colectomy, laparoscopic assisted right colectomy and robotic technique) or extracorporeal (for laparoscopic assisted right colectomy, laparoscopic facilitated right colectomy, hand-assisted right colectomy and open right colectomy) and the different incision (suprapubic, median or transverse on the right side of abdomen). The different laparoscopic techniques meet the same oncological criteria of radicalism as the open surgery for the right colon. The totally laparoscopic right colectomy with intracorporeal anastomosis and even more the single incision laparoscopic surgery colectomy, remain a technical challenge due to the complexity of procedures (especially for the single incision laparoscopic surgery colectomy) and the particular right colon vascular anatomy but they seem to have some theoretical advantages compared to the other laparoscopic and open procedures. Data reported in literature while confirming the advantages of laparoscopic approach, do not allow to solve controversies about which is the best laparoscopic technique (Intracorporeal vs Extracorporeal Anastomosis) to treat the right colon cancer. However, the laparoscopic techniques with intracorporeal anastomosis for the right colon seem to show some theoretical advantages (functional, technical, oncological and cosmetic advantages) even if all studies conclude that further prospective randomized trials are necessary. Robotic technique may be useful to overcome the problems related to inexperience in laparoscopy in some surgical centers. PMID:27648160

Surgical approach to right colon cancer: From open technique to robot. State of art.

PubMed

Fabozzi, Massimiliano; Cirillo, Pia; Corcione, Francesco

2016-08-27

This work is a topic highlight on the surgical treatment of the right colon pathologies, focusing on the literature state of art and comparing the open surgery to the different laparoscopic and robotic procedures. Different laparoscopic procedures have been described for the treatment of right colon tumors: Totally laparoscopic right colectomy, laparoscopic assisted right colectomy, laparoscopic facilitated right colectomy, hand-assisted right colectomy, single incision laparoscopic surgery colectomy, robotic right colectomy. Two main characteristics of these techniques are the different type of anastomosis: Intracorporeal (for totally laparoscopic right colectomy, single incision laparoscopic surgery colectomy, laparoscopic assisted right colectomy and robotic technique) or extracorporeal (for laparoscopic assisted right colectomy, laparoscopic facilitated right colectomy, hand-assisted right colectomy and open right colectomy) and the different incision (suprapubic, median or transverse on the right side of abdomen). The different laparoscopic techniques meet the same oncological criteria of radicalism as the open surgery for the right colon. The totally laparoscopic right colectomy with intracorporeal anastomosis and even more the single incision laparoscopic surgery colectomy, remain a technical challenge due to the complexity of procedures (especially for the single incision laparoscopic surgery colectomy) and the particular right colon vascular anatomy but they seem to have some theoretical advantages compared to the other laparoscopic and open procedures. Data reported in literature while confirming the advantages of laparoscopic approach, do not allow to solve controversies about which is the best laparoscopic technique (Intracorporeal vs Extracorporeal Anastomosis) to treat the right colon cancer. However, the laparoscopic techniques with intracorporeal anastomosis for the right colon seem to show some theoretical advantages (functional, technical, oncological and cosmetic advantages) even if all studies conclude that further prospective randomized trials are necessary. Robotic technique may be useful to overcome the problems related to inexperience in laparoscopy in some surgical centers.

Quantum communication complexity advantage implies violation of a Bell inequality

PubMed Central

Buhrman, Harry; Czekaj, Łukasz; Grudka, Andrzej; Horodecki, Michał; Horodecki, Paweł; Markiewicz, Marcin; Speelman, Florian; Strelchuk, Sergii

2016-01-01

We obtain a general connection between a large quantum advantage in communication complexity and Bell nonlocality. We show that given any protocol offering a sufficiently large quantum advantage in communication complexity, there exists a way of obtaining measurement statistics that violate some Bell inequality. Our main tool is port-based teleportation. If the gap between quantum and classical communication complexity can grow arbitrarily large, the ratio of the quantum value to the classical value of the Bell quantity becomes unbounded with the increase in the number of inputs and outputs. PMID:26957600

Lignocellulosic ethanol: Technology design and its impact on process efficiency.

PubMed

Paulova, Leona; Patakova, Petra; Branska, Barbora; Rychtera, Mojmir; Melzoch, Karel

2015-11-01

This review provides current information on the production of ethanol from lignocellulosic biomass, with the main focus on relationships between process design and efficiency, expressed as ethanol concentration, yield and productivity. In spite of unquestionable advantages of lignocellulosic biomass as a feedstock for ethanol production (availability, price, non-competitiveness with food, waste material), many technological bottlenecks hinder its wide industrial application and competitiveness with 1st generation ethanol production. Among the main technological challenges are the recalcitrant structure of the material, and thus the need for extensive pretreatment (usually physico-chemical followed by enzymatic hydrolysis) to yield fermentable sugars, and a relatively low concentration of monosaccharides in the medium that hinder the achievement of ethanol concentrations comparable with those obtained using 1st generation feedstocks (e.g. corn or molasses). The presence of both pentose and hexose sugars in the fermentation broth, the price of cellulolytic enzymes, and the presence of toxic compounds that can inhibit cellulolytic enzymes and microbial producers of ethanol are major issues. In this review, different process configurations of the main technological steps (enzymatic hydrolysis, fermentation of hexose/and or pentose sugars) are discussed and their efficiencies are compared. The main features, benefits and drawbacks of simultaneous saccharification and fermentation (SSF), simultaneous saccharification and fermentation with delayed inoculation (dSSF), consolidated bioprocesses (CBP) combining production of cellulolytic enzymes, hydrolysis of biomass and fermentation into one step, together with an approach combining utilization of both pentose and hexose sugars are discussed and compared with separate hydrolysis and fermentation (SHF) processes. The impact of individual technological steps on final process efficiency is emphasized and the potential for use of immobilized biocatalysts is considered. Copyright © 2014 Elsevier Inc. All rights reserved.

Synthesis of 1D-glyconanomaterials by a hybrid noncovalent-covalent functionalization of single wall carbon nanotubes: a study of their selective interactions with lectins and with live cells

NASA Astrophysics Data System (ADS)

Pernía Leal, M.; Assali, M.; Cid, J. J.; Valdivia, V.; Franco, J. M.; Fernández, I.; Pozo, D.; Khiar, N.

2015-11-01

To take full advantage of the remarkable applications of carbon nanotubes in different fields, there is a need to develop effective methods to improve their water dispersion and biocompatibility while maintaining their physical properties. In this sense, current approaches suffer from serious drawbacks such as loss of electronic structure together with low surface coverage in the case of covalent functionalizations, or instability of the dynamic hybrids obtained by non-covalent functionalizations. In the present work, we examined the molecular basis of an original strategy that combines the advantages of both functionalizations without their main drawbacks. The hierarchical self-assembly of diacetylenic-based neoglycolipids into highly organized and compacted rings around the nanotubes, followed by photopolymerization leads to the formation of nanotubes covered with glyconanorings with a shish kebab-type topology exposing the carbohydrate ligands to the water phase in a multivalent fashion. The glyconanotubes obtained are fully functional, and able to establish specific interactions with their cognate receptors. In fact, by taking advantage of this selective binding, an easy method to sense lectins as a working model of toxin detection was developed based on a simple analysis of TEM images. Remarkably, different experimental settings to assess cell membrane integrity, cell growth kinetics and cell cycle demonstrated the cellular biocompatibility of the sugar-coated carbon nanotubes compared to pristine single-walled carbon nanotubes.To take full advantage of the remarkable applications of carbon nanotubes in different fields, there is a need to develop effective methods to improve their water dispersion and biocompatibility while maintaining their physical properties. In this sense, current approaches suffer from serious drawbacks such as loss of electronic structure together with low surface coverage in the case of covalent functionalizations, or instability of the dynamic hybrids obtained by non-covalent functionalizations. In the present work, we examined the molecular basis of an original strategy that combines the advantages of both functionalizations without their main drawbacks. The hierarchical self-assembly of diacetylenic-based neoglycolipids into highly organized and compacted rings around the nanotubes, followed by photopolymerization leads to the formation of nanotubes covered with glyconanorings with a shish kebab-type topology exposing the carbohydrate ligands to the water phase in a multivalent fashion. The glyconanotubes obtained are fully functional, and able to establish specific interactions with their cognate receptors. In fact, by taking advantage of this selective binding, an easy method to sense lectins as a working model of toxin detection was developed based on a simple analysis of TEM images. Remarkably, different experimental settings to assess cell membrane integrity, cell growth kinetics and cell cycle demonstrated the cellular biocompatibility of the sugar-coated carbon nanotubes compared to pristine single-walled carbon nanotubes. Electronic supplementary information (ESI) available: Experimental procedures for the synthesis of compounds 12-10, 12-15, 17-20, 22-25, 27-30, NMR spectra, and additional TEM images. See DOI: 10.1039/c5nr05956a

Dynamic tuning by hydrostatic pressure of magnetocaloric properties to Ericsson like cycles

NASA Astrophysics Data System (ADS)

Gaztañaga, P.; Sacanell, J.; Leyva, A. G.; Quintero, M.

2018-03-01

A method to increase the relative cooling power to be used in Ericsson like refrigeration cycles is presented. The technique is based in the modification of the magnetic properties by the application of hydrostatic pressure on magnetic samples. The main advantage is to reach larger values of the magnetic entropy change in a wider temperature region (the so-called "table like" behavior). The study was carried out in a manganite belonging to the family of La0.625-yNdyCa0.375MnO3, and some conclusions were compared with the expected behavior in other materials extracted from literature.

Comparative analysis based on factor analysis of integrate production capacity of foodstuff in main foodstuff provinces

NASA Astrophysics Data System (ADS)

Zhang, Dehua; Zhou, Huiqiu

2011-10-01

Under great background of financial crisis, large fluctuation on international foodstuff price and frequent happening of natural disasters, each nation attaches importance to foodstuff safety problem increasingly. As a Great Power of population, China pays more attention to foodstuff safety problem definitely. Large foodstuff provinces play a major role on ensuring it. The paper arrives at the conclusion that each province has advantages and disadvantages in different factors through factor analyses on influencing factors of integrated production capacity of foodstuff in each province. Then we arrange the factor score, analyze the result of each large foodstuff province and ultimately give out feasible suggestions.

Motion Pattern Encapsulation for Data-Driven Constraint-Based Motion Editing

NASA Astrophysics Data System (ADS)

Carvalho, Schubert R.; Boulic, Ronan; Thalmann, Daniel

The growth of motion capture systems have contributed to the proliferation of human motion database, mainly because human motion is important in many applications, ranging from games entertainment and films to sports and medicine. However, the captured motions normally attend specific needs. As an effort for adapting and reusing captured human motions in new tasks and environments and improving the animator's work, we present and discuss a new data-driven constraint-based animation system for interactive human motion editing. This method offers the compelling advantage that it provides faster deformations and more natural-looking motion results compared to goal-directed constraint-based methods found in the literature.

Techniques of laparoscopic cholecystectomy: Nomenclature and selection.

PubMed

Haribhakti, Sanjiv P; Mistry, Jitendra H

2015-01-01

There are more than 50 different techniques of laparoscopic cholecystectomy (LC) available in literature mainly due to modifications by surgeons in aim to improve postoperative outcome and cosmesis. These modifications include reduction in port size and/or number than what is used in standard LC. There is no uniform nomenclature to describe these different techniques so that it is not possible to compare the outcomes of different techniques. We brief the advantages and disadvantages of each of these techniques and suggest the situation where particular technique would be useful. We also propose a nomenclature which is easy to remember and apply, so that any future comparison will be possible between the techniques.

Promises and challenges of stem cell research for regenerative medicine.

PubMed

Power, Carl; Rasko, John E J

2011-11-15

In recent years, stem cells have generated increasing excitement, with frequent claims that they are revolutionizing medicine. For those not directly involved in stem cell research, however, it can be difficult to separate fact from fiction or realistic expectation from wishful thinking. This article aims to provide internists with a clear and concise introduction to the field. While recounting some scientific and medical milestones, the authors discuss the 3 main varieties of stem cells-adult, embryonic, and induced pluripotent-comparing their advantages and disadvantages for clinical medicine. The authors have sought to avoid the moral and political debates surrounding stem cell research, focusing instead on scientific and medical issues.

Experimental demonstration of a quantum annealing algorithm for the traveling salesman problem in a nuclear-magnetic-resonance quantum simulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen Hongwei; High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031; Kong Xi

The method of quantum annealing (QA) is a promising way for solving many optimization problems in both classical and quantum information theory. The main advantage of this approach, compared with the gate model, is the robustness of the operations against errors originated from both external controls and the environment. In this work, we succeed in demonstrating experimentally an application of the method of QA to a simplified version of the traveling salesman problem by simulating the corresponding Schroedinger evolution with a NMR quantum simulator. The experimental results unambiguously yielded the optimal traveling route, in good agreement with the theoretical prediction.

Immunocapture reverse transcription-polymerase chain reaction combined with nested PCR greatly increases the detection of Prunus necrotic ring spot virus in the peach.

PubMed

Helguera, P R; Taborda, R; Docampo, D M; Ducasse, D A

2001-06-01

A detection system based on nested PCR after IC-RT-PCR (IC-RT-PCR-Nested PCR) was developed to improve indexing of Prunus necrotic ringspot virus in peach trees. Inhibitory effects and inconsistencies of the standard IC-RT-PCR were overcome by this approach. IC-RT-PCR-Nested PCR improved detection by three orders of magnitude compared with DAS-ELISA for the detection of PNRSV in leaves. Several different tissues were evaluated and equally consistent results were observed. The main advantages of the method are its consistency, high sensitivity and easy application in quarantine programs.

A new inverter topology using GTO commutation. [Gate Turn Off thyristor

NASA Technical Reports Server (NTRS)

Rippel, W. E.

1983-01-01

A new N-phase, forced commutated bridge inverter topology has been developed wherein a single Gate Turn Off Thyristor (GTO) is used to commutate each of 2N main Thyristors (SCRs). Since, for most applications, the primary loss mechanism is the SCR forward drop, very high efficiencies are possible. Compared with conventional pure SCR and pure GTO inverters, cost per kW is lower - in the former case due to the large cost differential between GTOs and SCRs. Other advantages of the new inverter include high power density, low switching losses and stresses, modulation flexibility and amenability to high voltage and high frequency operation.

Aviation Logistics in U.S. Pacific Command: A Cost-Based Analysis and Comparative Advantage to Commercial Shipment

DTIC Science & Technology

2012-12-01

IN U.S. PACIFIC COMMAND: A COST- BASED ANALYSIS AND COMPARATIVE ADVANTAGE TO COMMERCIAL SHIPMENT by Tod B. Diffey Matthew J. Beck December...PACIFIC COMMAND: A COST- BASED ANALYSIS AND COMPARATIVE ADVANTAGE TO COMMERCIAL SHIPMENT 5. FUNDING NUMBERS 6. AUTHOR(S) Tod B. Diffey and Matthew...this study will provide a cost based analysis and qualitative evaluation regarding the use of commercial agencies and/or United States Marine Corps

TEM prospection on quaternary faults: the case of San Ramón Fault (SRF), Central Chile

NASA Astrophysics Data System (ADS)

Estay, N. P.; Yanez, G. A.; Maringue, J. I.

2016-12-01

Quaternary faults are relevant study objects in geosciences to better estimation of seismic risk. Nowadays main efforts are focused on the improvement of paleoseismology and geophysics techniques. At this regard, we present here a TEM prospection of the San Ramón quaternary fault in the southern Andes. This fault has no record of historic activation, however, given its proximity to the Chilean capital, hazardous estimate is mandatory. Evidences of the SRF are restricted to geomorphologic features, and associated secondary faults on the hanging wall block, but any outcrop of the main fault have been identified. To observe the main fault in the basement rock, cover by a 30-100 m sedimentary basin, we carried out a TEM experiment. The best advantage of the TEM methodology compared to other near-surface electrical methods is it capacity to reach greater penetration depth compared to its spatial sampling rate. Taking this advantage, we define a 25x25 m transmitter loop (Tx) and 5x5 m receiver loop (Rx), allowing the suitable resolution to observe the fault core. To reach a deeper penetration depth but keeping high resolution of the shallow parts, we made two complementary measurements, the first with one-turn transmitter loop, and the second with 4-turn transmitter loops, to resolve the early and late times properly. As result we define vertical profiles of 100-150m depth, and including 48 measures (24 of one-turn transmitter loop, and 24 of four-turn transmitter loop), the resulting pseudo 2D image is a 500m profile with depth extent of 150m. In this section we can observe different resistivity domain, with a horizontal continuity in many measures. The experiment allows to cross the sedimentary cover, and observe the top of the basement rock. In the rock domain, it can be observed a high resistivity body, interpreted as a pristine rock, and some extremely low resistivity bodies, that are interpreted as a fractured rock saturated with water, and eventually mapping a fossil/actual hydrothermal flow. These fractured zone is interpreted as the main trace of the fault. Finally, this TEM experiment allow to estimate the associated cumulative slip, as well as the fault geometry of the first 150m, useful for BEM or FEM seismic modeling.

Spice use in food: Properties and benefits.

PubMed

Jessica Elizabeth, De La Torre; Gassara, Fatma; Kouassi, Anne Patricia; Brar, Satinder Kaur; Belkacemi, Khaled

2017-04-13

Spices are parts of plants that due to their properties are used as colorants, preservatives, or medicine. The uses of spices have been known since long time, and the interest in the potential of spices is remarkable due to the chemical compounds contained in spices, such as phenylpropanoids, terpenes, flavonoids, and anthocyanins. Spices, such as cumin (cuminaldehyde), clove (eugenol), and cinnamon (cinnamaldehyde) among others, are known and studied for their antimicrobial and antioxidant properties due to their main chemical compounds. These spices have the potential to be used as preservatives in many foods namely in processed meat to replace chemical preservatives. Main chemical compounds in spices also confer other properties providing a variety of applications to spices, such as insecticidal, medicines, colorants, and natural flavoring. Spices provide beneficial effects, such as antioxidant activity levels that are comparable to regular chemical antioxidants used so they can be used as a natural alternative to synthetic preservatives. In this review, the main characteristics of spices will be described as well as their chemical properties, different applications of these spices, and the advantages and disadvantages of their use.

Calibration and accuracy analysis of a focused plenoptic camera

NASA Astrophysics Data System (ADS)

Zeller, N.; Quint, F.; Stilla, U.

2014-08-01

In this article we introduce new methods for the calibration of depth images from focused plenoptic cameras and validate the results. We start with a brief description of the concept of a focused plenoptic camera and how from the recorded raw image a depth map can be estimated. For this camera, an analytical expression of the depth accuracy is derived for the first time. In the main part of the paper, methods to calibrate a focused plenoptic camera are developed and evaluated. The optical imaging process is calibrated by using a method which is already known from the calibration of traditional cameras. For the calibration of the depth map two new model based methods, which make use of the projection concept of the camera are developed. These new methods are compared to a common curve fitting approach, which is based on Taylor-series-approximation. Both model based methods show significant advantages compared to the curve fitting method. They need less reference points for calibration than the curve fitting method and moreover, supply a function which is valid in excess of the range of calibration. In addition the depth map accuracy of the plenoptic camera was experimentally investigated for different focal lengths of the main lens and is compared to the analytical evaluation.

Functional conjugated pyridines via main-group element tuning.

PubMed

Stolar, Monika; Baumgartner, Thomas

2018-03-29

Pyridine-based materials have seen widespread attention for the development of n-type organic materials. In recent years, the incorporation of main-group elements has also explored significant advantages for the development and tunability of organic conjugated materials. The unique chemical and electronic structure of main-group elements has led to several enhancements in conventional organic materials. This Feature article highlights recent main-group based pyridine materials by discussing property enhancements and application in organic electronics.

Coronary Artery Bypass Surgery Versus Drug-Eluting Stent Implantation for Left Main or Multivessel Coronary Artery Disease: A Meta-Analysis of Individual Patient Data.

PubMed

Lee, Cheol Whan; Ahn, Jung-Min; Cavalcante, Rafael; Sotomi, Yohei; Onuma, Yoshinobu; Suwannasom, Pannipa; Tenekecioglu, Erhan; Yun, Sung-Cheol; Park, Duk-Woo; Kang, Soo-Jin; Lee, Seung-Whan; Kim, Young-Hak; Park, Seong-Wook; Serruys, Patrick W; Park, Seung-Jung

2016-12-26

The authors undertook a patient-level meta-analysis to compare long-term outcomes after coronary artery bypass grafting (CABG) versus percutaneous coronary intervention (PCI) with drug-eluting stents (DES) in 3,280 patients with left main or multivessel coronary artery disease (CAD). The relative efficacy and safety of CABG versus PCI with DES for left main or multivessel CAD remain controversial. Data were pooled from the BEST (Randomized Comparison of Coronary Artery Bypass Surgery and Everolimus Eluting Stent Implantation in the Treatment of Patients With Multivessel Coronary Artery Disease), PRECOMBAT (Premier of Randomized Comparison of Bypass Surgery vs. Angioplasty Using Sirolimus-Eluting Stent in Patients With Left Main Coronary Artery Disease), and SYNTAX (Synergy Between PCI With Taxus and Cardiac Surgery) trials. The primary outcome was a composite of all-cause death, myocardial infarction, or stroke. The median follow-up was 60 months, and follow-up was completed for 96.2% of patients. The rate of primary outcome was significantly lower with CABG than with PCI (13.0% vs. 16.0%; hazard ratio [HR]: 0.83; 95% confidence interval [CI]: 0.69 to 1.00; p = 0.046). The difference was mainly driven by reduction in myocardial infarction (HR: 0.46; 95% CI: 0.33 to 0.64; p < 0.001). There was significant interaction between treatment effect and types of CAD, showing CABG to be superior compared with PCI with DES in patients with multivessel CAD (p = 0.001), but no between-group difference in those with left main CAD (p = 0.427). The rates for all-cause death and stroke were similar between the 2 groups. By contrast, the need for repeat revascularization was significantly lower in the CABG group compared with the PCI group. CABG, as compared with PCI with DES, reduced long-term rates of the composite of all-cause death, myocardial infarction, or stroke in patients with left main or multivessel CAD. The advantage of CABG over PCI with DES was particularly pronounced in those with multivessel CAD. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Semiconductor laser technology for remote sensing experiments

NASA Technical Reports Server (NTRS)

Katz, Joseph

1988-01-01

Semiconductor injection lasers are required for implementing virtually all spaceborne remote sensing systems. Their main advantages are high reliability and efficiency, and their main roles are envisioned in pumping and injection locking of solid state lasers. In some shorter range applications they may even be utilized directly as the sources.

Educational Change in Saudi Arabia

ERIC Educational Resources Information Center

Alnahdi, Ghaleb Hamad

2014-01-01

The main goal of this article is to discuss the possibility of adapting the suggestions by Hargreaves and Shirley (2009) in their book "The Fourth Way." This paper will discuss the topic of educational change and reform through three main points. First, it will review the most important advantages and disadvantages that characterize the…

The main factor affecting the competitiveness of Contractor Company

NASA Astrophysics Data System (ADS)

Nurisra; Malahayati, Nurul; Mahmuddin

2018-05-01

Contractor companies must have the competitive advantage to compete in maintaining the survival of the company. Problems arise because quite a lot of advantages can be used and these advantages must be used appropriately to produce competitiveness for the company to continue to compete and to win the competition. This study aims to determine the main factors affecting the competitiveness of medium-class contractors in Banda Aceh. Data collection was obtained through questionnaires distributed to 31 middle-class contractors in Banda Aceh. Data processing and analysis is done by using descriptive analysis. Based on the result of descriptive analysis, it can be concluded that the most important competitiveness factor with a mean score value 4.52 is the relationship, and the factor that has the highest mean score value is the relationship with the government of 4.97, while the result of the ranking analysis is obtained 25 factor that is critical to the competitiveness of medium-class contractors in Banda Aceh.

The "Ad Circulorum" Fallacy and Comparative Advantage Debating or: Why Don't Debate Cases Make Sense to Outside Listeners?

ERIC Educational Resources Information Center

Richardson, Larry S.

Circular reasoning is often employed in comparative advantage debate cases when only a plan and advantages are articulated without adequate reference to the resolution which inspired the proposal. The advancing of such subtopical analyses as debate cases is deleterious to the long-range interests of educational debate because the practice…

Eccentric exercises for the management of tendinopathy of the main body of the Achilles tendon with or without the AirHeel Brace. A randomized controlled trial. A: effects on pain and microcirculation.

PubMed

Knobloch, Karsten; Schreibmueller, Louisa; Longo, Umile Giuseppe; Vogt, Peter M

2008-01-01

To compare eccentric training and the combination of eccentric training with the AirHeel Brace for the management of tendinopathy of the main body of the Achilles tendon. We recruited 116 subjects with unilateral tendinopathy of the main body of the Achilles tendon, who were randomized in two groups. Group A performed a regimen of daily eccentric training associated with the AirHeel Brace (Donjoy Orthopedics, Vista, CA, USA). Group B performed the same eccentric training without the AirHeel Brace. Tendon microcirculatory mapping was performed using combined Laser-Doppler and spectrophotometry. Pre- and post-operative FAOS score and VAS score were used to evaluate the patients. The FAOS score and the VAS score showed significant improvements from pre-operative to post-operative values in both groups (A 5.1 +/- 2 vs. 2.9 +/- 2.4, 43% reduction and B: 5.4 +/- 2.1 vs. 3.6 +/- 2.4, 33% reduction, both p = 0.0001). There were no statistically significant differences in FAOS score and VAS score when comparing the two groups after the end of the intervention. In Group A, tendon oxygen saturation in the main body of the Achilles tendon showed significant increase from pre- to post-management values (68 +/- 12 vs.74 +/- 8%, p = 0.003). Post-capillary venous filling pressures showed significant reduction from pre- to post-intervention values. Eccentric training, associated or not with the AirHeel Brace, produces the same effect in patients with tendinopathy of the main body of the Achilles tendon. The combination of eccentric training with the AirHeel Brace can optimize tendon microcirculation, but these micro-circulator advantages do not translate into superior clinical performance when compared with eccentric training alone.

Using Variable-Length Aligned Fragment Pairs and an Improved Transition Function for Flexible Protein Structure Alignment.

PubMed

Cao, Hu; Lu, Yonggang

2017-01-01

With the rapid growth of known protein 3D structures in number, how to efficiently compare protein structures becomes an essential and challenging problem in computational structural biology. At present, many protein structure alignment methods have been developed. Among all these methods, flexible structure alignment methods are shown to be superior to rigid structure alignment methods in identifying structure similarities between proteins, which have gone through conformational changes. It is also found that the methods based on aligned fragment pairs (AFPs) have a special advantage over other approaches in balancing global structure similarities and local structure similarities. Accordingly, we propose a new flexible protein structure alignment method based on variable-length AFPs. Compared with other methods, the proposed method possesses three main advantages. First, it is based on variable-length AFPs. The length of each AFP is separately determined to maximally represent a local similar structure fragment, which reduces the number of AFPs. Second, it uses local coordinate systems, which simplify the computation at each step of the expansion of AFPs during the AFP identification. Third, it decreases the number of twists by rewarding the situation where nonconsecutive AFPs share the same transformation in the alignment, which is realized by dynamic programming with an improved transition function. The experimental data show that compared with FlexProt, FATCAT, and FlexSnap, the proposed method can achieve comparable results by introducing fewer twists. Meanwhile, it can generate results similar to those of the FATCAT method in much less running time due to the reduced number of AFPs.

The Bell Curve and the Future of Literacy: If This Is the Answer, What Is the Question?

ERIC Educational Resources Information Center

Wahlstrom, Ralph

This paper takes the position that the main premise of "The Bell Curve" (by Richard Murray and Charles Herrnstein) is that significant advantages exist for possessing an IQ toward the top of the range--advantages that pertain to school success, career, and income. The premise is that people with high IQs have naturally acquired scholarly…

The Mismatch between the Unmet Need for and Supply of Occupational English Skills: An Investigation of Higher Educated Government Staff in Norway

ERIC Educational Resources Information Center

Hellekjaer, Glenn Ole; Fairway, Tone

2015-01-01

Nordic universities are involved in a global competition against American and UK universities, whose main competitive advantage is their placement in English-speaking countries. The authors argue that Nordic universities need to do more to offset this advantage than merely offer English-Medium (EM) courses to foreign and domestic students. They…

Enhanced round robin CPU scheduling with burst time based time quantum

NASA Astrophysics Data System (ADS)

Indusree, J. R.; Prabadevi, B.

2017-11-01

Process scheduling is a very important functionality of Operating system. The main-known process-scheduling algorithms are First Come First Serve (FCFS) algorithm, Round Robin (RR) algorithm, Priority scheduling algorithm and Shortest Job First (SJF) algorithm. Compared to its peers, Round Robin (RR) algorithm has the advantage that it gives fair share of CPU to the processes which are already in the ready-queue. The effectiveness of the RR algorithm greatly depends on chosen time quantum value. Through this research paper, we are proposing an enhanced algorithm called Enhanced Round Robin with Burst-time based Time Quantum (ERRBTQ) process scheduling algorithm which calculates time quantum as per the burst-time of processes already in ready queue. The experimental results and analysis of ERRBTQ algorithm clearly indicates the improved performance when compared with conventional RR and its variants.

Solving large sparse eigenvalue problems on supercomputers

NASA Technical Reports Server (NTRS)

Philippe, Bernard; Saad, Youcef

1988-01-01

An important problem in scientific computing consists in finding a few eigenvalues and corresponding eigenvectors of a very large and sparse matrix. The most popular methods to solve these problems are based on projection techniques on appropriate subspaces. The main attraction of these methods is that they only require the use of the matrix in the form of matrix by vector multiplications. The implementations on supercomputers of two such methods for symmetric matrices, namely Lanczos' method and Davidson's method are compared. Since one of the most important operations in these two methods is the multiplication of vectors by the sparse matrix, methods of performing this operation efficiently are discussed. The advantages and the disadvantages of each method are compared and implementation aspects are discussed. Numerical experiments on a one processor CRAY 2 and CRAY X-MP are reported. Possible parallel implementations are also discussed.

Implementation of High Speed Distributed Data Acquisition System

NASA Astrophysics Data System (ADS)

Raju, Anju P.; Sekhar, Ambika

2012-09-01

This paper introduces a high speed distributed data acquisition system based on a field programmable gate array (FPGA). The aim is to develop a "distributed" data acquisition interface. The development of instruments such as personal computers and engineering workstations based on "standard" platforms is the motivation behind this effort. Using standard platforms as the controlling unit allows independence in hardware from a particular vendor and hardware platform. The distributed approach also has advantages from a functional point of view: acquisition resources become available to multiple instruments; the acquisition front-end can be physically remote from the rest of the instrument. High speed data acquisition system transmits data faster to a remote computer system through Ethernet interface. The data is acquired through 16 analog input channels. The input data commands are multiplexed and digitized and then the data is stored in 1K buffer for each input channel. The main control unit in this design is the 16 bit processor implemented in the FPGA. This 16 bit processor is used to set up and initialize the data source and the Ethernet controller, as well as control the flow of data from the memory element to the NIC. Using this processor we can initialize and control the different configuration registers in the Ethernet controller in a easy manner. Then these data packets are sending to the remote PC through the Ethernet interface. The main advantages of the using FPGA as standard platform are its flexibility, low power consumption, short design duration, fast time to market, programmability and high density. The main advantages of using Ethernet controller AX88796 over others are its non PCI interface, the presence of embedded SRAM where transmit and reception buffers are located and high-performance SRAM-like interface. The paper introduces the implementation of the distributed data acquisition using FPGA by VHDL. The main advantages of this system are high accuracy, high speed, real time monitoring.

Medicare Advantage Plans

MedlinePlus

... enrollment Find & compare doctors, hospitals, & other providers Medicare Advantage Plans A type of Medicare health plan offered ... a private company that contracts with Medicare. Medicare Advantage Plans provide all of your Part A and ...

Fuel cells: principles, types, fuels, and applications.

PubMed

Carrette, L; Friedrich, K A; Stimming, U

2000-12-15

During the last decade, fuel cells have received enormous attention from research institutions and companies as novel electrical energy conversion systems. In the near future, they will see application in automotive propulsion, distributed power generation, and in low power portable devices (battery replacement). This review gives an introduction into the fundamentals and applications of fuel cells: Firstly, the environmental and social factors promoting fuel cell development are discussed, with an emphasis on the advantages of fuel cells compared to the conventional techniques. Then, the main reactions, which are responsible for the conversion of chemical into electrical energy in fuel cells, are given and the thermodynamic and kinetic fundamentals are stated. The theoretical and real efficiencies of fuel cells are also compared to that of internal combustion engines. Next, the different types of fuel cells and their main components are explained and the related material issues are presented. A section is devoted to fuel generation and storage, which is of paramount importance for the practical aspects of fuel cell use. Finally, attention is given to the integration of the fuel cells into complete systems. © 2000 WILEY-VCH Verlag GmbH, Weinheim, Fed. Rep. of Germany.

Analytical Investigation and Improvement of Performance of a Proton Exchange Membrane (Pem) Fuel Cell in Mobile Applications

NASA Astrophysics Data System (ADS)

Khazaee, I.

2015-05-01

In this study, the performance of a proton exchange membrane fuel cell in mobile applications is investigated analytically. At present the main use and advantages of fuel cells impact particularly strongly on mobile applications such as vehicles, mobile computers and mobile telephones. Some external parameters such as the cell temperature (Tcell ) , operating pressure of gases (P) and air stoichiometry (λair ) affect the performance and voltage losses in the PEM fuel cell. Because of the existence of many theoretical, empirical and semi-empirical models of the PEM fuel cell, it is necessary to compare the accuracy of these models. But theoretical models that are obtained from thermodynamic and electrochemical approach, are very exact but complex, so it would be easier to use the empirical and smi-empirical models in order to forecast the fuel cell system performance in many applications such as mobile applications. The main purpose of this study is to obtain the semi-empirical relation of a PEM fuel cell with the least voltage losses. Also, the results are compared with the existing experimental results in the literature and a good agreement is seen.

A brief review of moxifloxacin in the treatment of elderly patients with community-acquired pneumonia (CAP)

PubMed Central

Ferrara, Anna M

2007-01-01

Community-acquired pneumonia (CAP) remains a common cause of morbidity and a potentially life-threatening illness throughout the world mainly in elderly patients. Initial antibacterial treatment, usually empirical, should be as effective as possible in order to assure rapid clinical resolution and reduce high rates of hospitalization and mortality especially affecting aged patients. New fluoroquinolones with potent activity against the most important respiratory pathogens including Streptococcus pneumoniae, a key pathogen mainly in old patients with CAP, have been recently suggested by several international guidelines as monotherapy for the treatment of most CAP patient categories. Among newer derivatives, moxifloxacin, an advanced generation 8-methoxy quinolone, has demonstrated good clinical and bacteriological efficacy in large, well designed clinical trials both in adults and old patients with CAP, achieving also in aged people efficacy comparable with that of standard treatments. Good pharmacokinetic characteristics such as excellent penetration into respiratory tract tissues and fluids, optimal bioavailability, simplicity of once-daily dosing, and good tolerability, represent potential advantages of moxifloxacin over other therapies. In addition, primarily due to a shorter length of hospital stay, moxifloxacin has been shown to save costs compared with standard therapy. PMID:18044134

Therapeutic Options in Idiopathic Burning Mouth Syndrome: Literature Review

PubMed Central

Miziara, Ivan; Chagury, Azis; Vargas, Camila; Freitas, Ludmila; Mahmoud, Ali

2014-01-01

Introduction Burning mouth syndrome (BMS) is characterized by a burning sensation in the tongue, palate, lips, or gums of no well-defined etiology. The diagnosis and treatment for primary BMS are controversial. No specific laboratory tests or diagnostic criteria are well established, and the diagnosis is made by excluding all other possible disorders. Objective To review the literature on the main treatment options in idiopathic BMS and compare the best results of the main studies in 15 years. Data Synthesis We conducted a literature review on PubMed/MEDLINE, SciELO, and Cochrane-BIREME of work in the past 15 years, and only selected studies comparing different therapeutic options in idiopathic BMS, with preference for randomized and double-blind controlled studies. Final Comments Topical clonazepam showed good short-term results for the relief of pain, although this was not presented as a definitive cure. Similarly, α-lipoic acid showed good results, but there are few randomized controlled studies that showed the long-term results and complete remission of symptoms. On the other hand, cognitive therapy is reported as a good and lasting therapeutic option with the advantage of not having side effects, and it can be combined with pharmacologic therapy. PMID:25992157

Treatment of mountain refuge wastewater by fixed and moving bed biofilm systems.

PubMed

Andreottola, G; Damiani, E; Foladori, P; Nardelli, P; Ragazzi, M

2003-01-01

Tourists visiting mountain refuges in the Alps have increased significantly in the last decade and the number of refuges and huts at high altitude too. In this research the results of an intensive monitoring of a wastewater treatment plant (WWTP) for a tourist mountain refuge located at 2,981 m a.s.l. are described. Two biofilm reactors were adopted: (a) a Moving Bed Biofilm Reactor (MBBR); (b) a submerged Fixed Bed Biofilm Reactor (FBBR). The aims of this research were: (i) the evaluation of the main parameters characterising the processes and involved in the design of the wastewater plants, in order to compare advantages and disadvantages of the two tested alternatives; (ii) the acquisition of an adequate knowledge of the problems connected with the wastewater treatment in alpine refuges. The main results have been: (i) a quick start-up of the biological reactors obtainable thanks to a pre-colonization before the transportation of the plastic carriers to the refuge at the beginning of the tourist season; (ii) low volume and area requirement; (iii) significantly higher removal efficiency compared to other fixed biomass systems, such as trickling filters, but the energy consumption is higher.

A review of ocean chlorophyll algorithms and primary production models

NASA Astrophysics Data System (ADS)

Li, Jingwen; Zhou, Song; Lv, Nan

2015-12-01

This paper mainly introduces the five ocean chlorophyll concentration inversion algorithm and 3 main models for computing ocean primary production based on ocean chlorophyll concentration. Through the comparison of five ocean chlorophyll inversion algorithm, sums up the advantages and disadvantages of these algorithm,and briefly analyzes the trend of ocean primary production model.

The Evolution of Utilizing Manual Throttles to Avoid Low LH2 NPSP at the SSME Inlet

NASA Technical Reports Server (NTRS)

Henfling, Rick

2011-01-01

Even before the first flight of the Space Shuttle, it was understood low liquid hydrogen (LH2) Net Positive Suction Pressure (NPSP) at the inlet to the Space Shuttle Main Engine (SSME) can have adverse effects on engine operation. A number of failures within both the External Tank (ET) and the Orbiter Main Propulsion System could result in a low LH2 NPSP condition. Operational workarounds were developed to take advantage of the onboard crew s ability to manually throttle down the SSMEs, which alleviated the low LH2 NPSP condition. A throttling down of the SSME resulted in an increase in NPSP, mainly due to the reduction in frictional flow losses while at a lower throttle setting. As engineers refined their understanding of the NPSP requirements for the SSME (through a robust testing program), the operational techniques evolved to take advantage of these additional capabilities. Currently the procedure, which for early Space Shuttle missions required a Return-to-Launch-Site abort, now would result in a nominal Main Engine Cut Off (MECO) and no loss of mission objectives.

Modes of interconnected lattice trusses using continuum models, part 1

NASA Technical Reports Server (NTRS)

Balakrishnan, A. V.

1991-01-01

This represents a continuing systematic attempt to explore the use of continuum models--in contrast to the Finite Element Models currently universally in use--to develop feedback control laws for stability enhancement of structures, particularly large structures, for deployment in space. We shall show that for the control objective, continuum models do offer unique advantages. It must be admitted of course that developing continuum models for arbitrary structures is no easy task. In this paper we take advantage of the special nature of current Large Space Structures--typified by the NASA-LaRC Evolutionary Model which will be our main concern--which consists of interconnected orthogonal lattice trusses each with identical bays. Using an equivalent one-dimensional Timoshenko beam model, we develop an almost complete continuum model for the evolutionary structure. We do this in stages, beginning only with the main bus as flexible and then going on to make all the appendages also flexible-except for the antenna structure. Based on these models we proceed to develop formulas for mode frequencies and shapes. These are shown to be the roots of the determinant of a matrix of small dimension compared with mode calculations using Finite Element Models, even though the matrix involves transcendental functions. The formulas allow us to study asymptotic properties of the modes and how they evolve as we increase the number of bodies which are treated as flexible. The asymptotics, in fact, become simpler.

Released polysaccharides (RPS) from Cyanothece sp. CCY 0110 as biosorbent for heavy metals bioremediation: interactions between metals and RPS binding sites.

PubMed

Mota, Rita; Rossi, Federico; Andrenelli, Luisa; Pereira, Sara Bernardes; De Philippis, Roberto; Tamagnini, Paula

2016-09-01

Bioremediation of heavy metals using microorganisms can be advantageous compared to conventional physicochemical methods due to the use of renewable resources and efficiencies of removal particularly cations at low concentrations. In this context, cyanobacteria/cyanobacterial extracellular polymeric substances (EPS) emerge as a valid alternative due to the anionic nature and particular composition of these polymers. In this work, various culture fractions of the unicellular cyanobacterium Cyanothece sp. CCY 0110 were employed in bioremoval assays using three of the most common heavy metal pollutants in water bodies-copper, cadmium, and lead-separately or in combined systems. Our study showed that the released polysaccharides (RPS) were the most efficient fraction, removing the metal(s) by biosorption. Therefore, this polymer was subsequently used to evaluate the interactions between the metals/RPS binding sites using SEM-EDX, ICP-OES, and FTIR. Acid and basic pretreatments applied to the polymer further improve the process efficiency, and the exposure to an alkaline solution seems to alter the RPS conformation. The differences observed in the specific metal bioremoval seem to be mainly due to the RPS organic functional groups available, mainly carboxyl and hydroxyl, than to an ion exchange mechanism. Considering that Cyanothece is a highly efficient RPS-producer and that RPS can be easily separated from the culture, immobilized or confined, this polymer can be advantageous for the establishment/improvement of heavy metal removal systems.

Ammonium nitrate as an oxidizer in solid composite propellants

NASA Astrophysics Data System (ADS)

Manelis, G. B.; Lempert, D. B.

2009-09-01

Despite the fact that ammonium nitrate (AN) has the highest hydrogen content and fairly high oxygen balance (compared to other oxidizers), its extremely low formation enthalpy and relatively low density makes it one of the worst power oxidizers in solid composite propellants (SCP). Nevertheless, AN has certain advantages - the combustion of the compositions containing AN is virtually safe, its combustion products are ecologically clean, it is very accessible and cheap, and also very thermostable (far more stable than ammonium dinitramide (ADN)). Besides, its low density stops being a disadvantage if the propellant has to be used in deep space and therefore, must be carried there with other rocket carriers. The low cost of AN may also become a serious advantage in the AN application even in lower stages of multistage space launchers as well as in one-stage space launchers with low mass fraction of the propellant. The main specific features relevant to the creation of AN-based SCPs with the optimal energetic characteristics are discussed. The use of metals and their hydrides and proper fuel-binders as well as the recent successes in phase stabilization of AN are described.

[Plastic surgery in the setting of a public hospital day care unit].

PubMed

Faga, A; Valdatta, L; Magnani, S; Thione, A

2000-09-01

The authors describe the advantages and disadvantages of plastic surgery performed in a day-care public hospital unit. A retrospective study was made of the day-surgery activities over 16 months (1998-1999) as part of a centralized system. Data were compared to day-surgery activities undertaken in 1997 using a non-centralized system. The study was based in the Macchi Foundation Hospital in Varese. A total of 179 patients were treated from all age group whose clinical, intellectual and social characteristics enabled them to be treated using a day-hospital regime. The pathologies treated can be classified into six groups: benign skin pathologies, malignant skin pathologies, scar pathologies, hand disorders, burns and others. All operations were performed as planned under general, local or regional anesthesia with the help of an anesthetist. The centralized system has a number of advantages of a social and technical kind; there are few disadvantages, mainly consisting in the impossibility of using this approach for emergency surgery and its overall rigidity. This form of surgery provides a service that stands out for its quality, organisational efficiency and low cost.

Advantages and disadvantages of pinless external fixation.

PubMed

Thomas, S R; Giele, H; Simpson, A H

2000-12-01

The AO pinless external fixator (PEF) uses trocar tipped clamps to grip the outer tibial cortex rather than pins to transfix it. Its main advantage is to avoid further contamination of the medullary canal in open tibial fractures where a nail may subsequently be used. We tested the anatomical safety of this device and its effect on plastic surgical procedures compared with a standard unilateral external fixator (UEF).The PEF and UEF were placed on two amputated limbs which were then dissected. Structures at risk were traced on ten cadaver limbs. We found that important anatomical structures were endangered by the PEF and that safe zones could not always be defined. The UEF avoided these structures. Plastic surgical approaches were made more difficult by the PEF which imposed limitations on local flap design and endangered the arterial perforators which supply them. We conclude that safety is compromised by the PEF because margins for error are small. It poses additional problems in soft tissue reconstruction and highlights the need for co-operation between plastic surgical and orthopaedic teams in choice of fixation device.

European Regional Climate Zone Modeling of a Commercial Absorption Heat Pump Hot Water Heater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharma, Vishaldeep; Shen, Bo; Keinath, Chris

2017-01-01

High efficiency gas-burning hot water heating takes advantage of a condensing heat exchanger to deliver improved combustion efficiency over a standard non-condensing configuration. The water heating is always lower than the gas heating value. In contrast, Gas Absorption Heat Pump (GAHP) hot water heating combines the efficiency of gas burning with the performance increase from a heat pump to offer significant gas energy savings. An ammonia-water system also has the advantage of zero Ozone Depletion Potential and low Global Warming Potential. In comparison with air source electric heat pumps, the absorption system can maintain higher coefficients of performance in coldermore » climates. In this work, a GAHP commercial water heating system was compared to a condensing gas storage system for a range of locations and climate zones across Europe. The thermodynamic performance map of a single effect ammonia-water absorption system was used in a building energy modeling software that could also incorporate the changing ambient air temperature and water mains temperature for a specific location, as well as a full-service restaurant water draw pattern.« less

Integrated Reporting as a Tool for Communicating with Stakeholders - Advantages and Disadvantages

NASA Astrophysics Data System (ADS)

Matuszyk, Iwona; Rymkiewicz, Bartosz

2018-03-01

Financial and non-financial reporting from the beginning of its existence is the primary source of communication between the company and a wide range of stakeholders. Over the decades it has adapted to the needs of rapidly changing business and social environment. Currently, the final link in the evolution of organizational reporting, such as integrated reporting, assumes integration and mutual connectivity to both financial and non-financial data. The main interest in the concept of integrated reporting comes from the value it contributes to the organization. Undoubtedly, the concept of integrated reporting is a milestone in the evolution of organizational reporting. It is however important to consider whether it adequately addresses the information needs of a wide range of stakeholders, and whether it is a universal tool for communication between the company and its stakeholders. The aim of the paper is to discuss the advantages and disadvantages of the concept of integrated reporting as a tool for communication with stakeholders and to further directions of its development. The article uses the research methods such as literature analysis, the content analysis of the corporate publications and comparative analysis.

A novel Laser Ion Mobility Spectrometer

NASA Astrophysics Data System (ADS)

Göbel, J.; Kessler, M.; Langmeier, A.

2009-05-01

IMS is a well know technology within the range of security based applications. Its main advantages lie in the simplicity of measurement, along with a fast and sensitive detection method. Contemporary technology often fails due to interference substances, in conjunction with saturation effects and a low dynamic detection range. High throughput facilities, such as airports, require the analysis of many samples at low detection limits within a very short timeframe. High detection reliability is a requirement for safe and secure operation. In our present work we developed a laser based ion-mobility-sensor which shows several advantages over known IMS sensor technology. The goal of our research was to increase the sensitivity compared to the range of 63Ni based instruments. This was achieved with an optimised geometric drift tube design and a pulsed UV laser system at an efficient intensity. In this intensity range multi-photon ionisation is possible, which leads to higher selectivity in the ion-formation process itself. After high speed capturing of detection samples, a custom designed pattern recognition software toolbox provides reliable auto-detection capability with a learning algorithm and a graphical user interface.

Quantification of 235U and 238U activity concentrations for undeclared nuclear materials by a digital gamma-gamma coincidence spectroscopy.

PubMed

Zhang, Weihua; Yi, Jing; Mekarski, Pawel; Ungar, Kurt; Hauck, Barry; Kramer, Gary H

2011-06-01

The purpose of this study is to investigate the possibility of verifying depleted uranium (DU), natural uranium (NU), low enriched uranium (LEU) and high enriched uranium (HEU) by a developed digital gamma-gamma coincidence spectroscopy. The spectroscopy consists of two NaI(Tl) scintillators and XIA LLC Digital Gamma Finder (DGF)/Pixie-4 software and card package. The results demonstrate that the spectroscopy provides an effective method of (235)U and (238)U quantification based on the count rate of their gamma-gamma coincidence counting signatures. The main advantages of this approach over the conventional gamma spectrometry include the facts of low background continuum near coincident signatures of (235)U and (238)U, less interference from other radionuclides by the gamma-gamma coincidence counting, and region-of-interest (ROI) imagine analysis for uranium enrichment determination. Compared to conventional gamma spectrometry, the method offers additional advantage of requiring minimal calibrations for (235)U and (238)U quantification at different sample geometries. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

HAMP - the microwave package on the High Altitude and LOng range research aircraft (HALO)

NASA Astrophysics Data System (ADS)

Mech, M.; Orlandi, E.; Crewell, S.; Ament, F.; Hirsch, L.; Hagen, M.; Peters, G.; Stevens, B.

2014-12-01

An advanced package of microwave remote sensing instrumentation has been developed for the operation on the new German High Altitude LOng range research aircraft (HALO). The HALO Microwave Package, HAMP, consists of two nadir-looking instruments: a cloud radar at 36 GHz and a suite of passive microwave radiometers with 26 frequencies in different bands between 22.24 and 183.31 ± 12.5 GHz. We present a description of HAMP's instrumentation together with an illustration of its potential. To demonstrate this potential, synthetic measurements for the implemented passive microwave frequencies and the cloud radar based on cloud-resolving and radiative transfer model calculations were performed. These illustrate the advantage of HAMP's chosen frequency coverage, which allows for improved detection of hydrometeors both via the emission and scattering of radiation. Regression algorithms compare HAMP retrieval with standard satellite instruments from polar orbiters and show its advantages particularly for the lower atmosphere with a root-mean-square error reduced by 5 and 15% for temperature and humidity, respectively. HAMP's main advantage is the high spatial resolution of about 1 km, which is illustrated by first measurements from test flights. Together these qualities make it an exciting tool for gaining a better understanding of cloud processes, testing retrieval algorithms, defining future satellite instrument specifications, and validating platforms after they have been placed in orbit.

HAMP - the microwave package on the High Altitude and LOng range research aircraft HALO

NASA Astrophysics Data System (ADS)

Mech, M.; Orlandi, E.; Crewell, S.; Ament, F.; Hirsch, L.; Hagen, M.; Peters, G.; Stevens, B.

2014-05-01

An advanced package of microwave remote sensing instrumentation has been developed for the operation on the new German High Altitude LOng range research aircraft (HALO). The HALO Microwave Package, HAMP, consists of two nadir looking instruments: a cloud radar at 36 GHz and a suite of passive microwave radiometers with 26 frequencies in different bands between 22.24 and 183.31 ± 12.5 GHz. We present a description of HAMP's instrumentation together with an illustration of its potential. To demonstrate this potential synthetic measurements for the implemented passive microwave frequencies and the cloud radar based on cloud resolving and radiative transfer model calculations were performed. These illustrate the advantage of HAMP's chosen frequency coverage, which allows for improved detection of hydrometeors both via the emission and scattering of radiation. Regression algorithms compare HAMP retrieval with standard satellite instruments from polar orbiters and show its advantages particularly for the lower atmosphere with a reduced root mean square error by 5 and 15% for temperature and humidity, respectively. HAMP's main advantage is the high spatial resolution of about 1 km which is illustrated by first measurements from test flights. Together these qualities make it an exciting tool for gaining better understanding of cloud processes, testing retrieval algorithms, defining future satellite instrument specifications, and validating platforms after they have been placed in orbit.

Familiar Tonal Context Improves Accuracy of Pitch Interval Perception.

PubMed

Graves, Jackson E; Oxenham, Andrew J

2017-01-01

A fundamental feature of everyday music perception is sensitivity to familiar tonal structures such as musical keys. Many studies have suggested that a tonal context can enhance the perception and representation of pitch. Most of these studies have measured response time, which may reflect expectancy as opposed to perceptual accuracy. We instead used a performance-based measure, comparing participants' ability to discriminate between a "small, in-tune" interval and a "large, mistuned" interval in conditions that involved familiar tonal relations (diatonic, or major, scale notes), unfamiliar tonal relations (whole-tone or mistuned-diatonic scale notes), repetition of a single pitch, or no tonal context. The context was established with a brief sequence of tones in Experiment 1 (melodic context), and a cadence-like two-chord progression in Experiment 2 (harmonic context). In both experiments, performance significantly differed across the context conditions, with a diatonic context providing a significant advantage over no context; however, no correlation with years of musical training was observed. The diatonic tonal context also provided an advantage over the whole-tone scale context condition in Experiment 1 (melodic context), and over the mistuned scale or repetition context conditions in Experiment 2 (harmonic context). However, the relatively small benefit to performance suggests that the main advantage of tonal context may be priming of expected stimuli, rather than enhanced accuracy of pitch interval representation.

Dental hygiene students' perceptions of distance learning: do they change over time?

PubMed

Sledge, Rhonda; Vuk, Jasna; Long, Susan

2014-02-01

The University of Arkansas for Medical Sciences dental hygiene program established a distant site where the didactic curriculum was broadcast via interactive video from the main campus to the distant site, supplemented with on-line learning via Blackboard. This study compared the perceptions of students towards distance learning as they progressed through the 21 month curriculum. Specifically, the study sought to answer the following questions: Is there a difference in the initial perceptions of students on the main campus and at the distant site toward distance learning? Do students' perceptions change over time with exposure to synchronous distance learning over the course of the curriculum? All 39 subjects were women between the ages of 20 and 35 years. Of the 39 subjects, 37 were Caucasian and 2 were African-American. A 15-question Likert scale survey was administered at 4 different periods during the 21 month program to compare changes in perceptions toward distance learning as students progressed through the program. An independent sample t-test and ANOVA were utilized for statistical analysis. At the beginning of the program, independent samples t-test revealed that students at the main campus (n=34) perceived statistically significantly higher effectiveness of distance learning than students at the distant site (n=5). Repeated measures of ANOVA revealed that perceptions of students at the main campus on effectiveness and advantages of distance learning statistically significantly decreased whereas perceptions of students at distant site statistically significantly increased over time. Distance learning in the dental hygiene program was discussed, and replication of the study with larger samples of students was recommended.

Statistic versus stochastic characterization of persistent droughts

NASA Astrophysics Data System (ADS)

Gonzalez-Perez, J.; Valdes, J. B.

2005-12-01

Droughts are one of more devastating natural disasters. A drought event is always related with deficiency in precipitation over a time period. As longer are the drought periods, larger are the damages associated with, following a potential relationship. Additionally, the extension covered by an event also increases its impact, because it makes difficult to compensate the deficit from neighbourhood water resources. Therefore, the characterization of a drought by its persistent deficit, and the area over which it extends are main points to be carried on. The Standardized Precipitation Index (SPI) provides a statistical characterization of the deficits. Its computation, for different aggregation time scales, allows a persistence evaluation. Another more recent statistic that may be applied in drought characterization is the extreme persistent probability function (e.p.f.), which characterizes the persistence of extreme realizations in a random sequence. This work presents an analysis of the differences in performance of the SPI and the e.p.f. in the statistical characterization of a drought event. The inclusion of the persistency directly in the statistic gives to the e.p.f. an advantage over the SPI. Furthermore, the relationship between the e.p.f. and its mean frequency of recurrence is known. Thus, the e.p.f. may be applied to provide either statistic or stochastic characterization of a drought event. Both criteria were compared, showing that the stochastic characterization produces a better drought indicator. The stochastic characterization using the e.p.f. as a criterion yields the new Drought Frequency Index (DFI). The index is applicable to any random water related variable to identify drought events. Its main advantages over the SPI are the direct inclusion of persistence, and its larger robustness to the time scale. To incorporate the spatial extension in the characterization of a drought event, the new DFI may also be evaluated to characterize the drought spatial-temporal development using DFI-maps. Case studies in Spain and the USA support the advantages of the e.p.f.

Defining International Contracting Terms

DTIC Science & Technology

1994-09-01

compensation so that another nation or company can make a sale or export. The Coca - Cola company refused to accept offsets to break into the lucrative Soviet...Union Market. Their main competitor, Pepsi- Cola , broke into this market 15 years earlier by accepting Stolichnaya vodka as a reciprocal purchase, a... advantages over the other available alternatives (personal interviews or a telephone A-2 survey). While personal interviews offer the advantages of a high

Electrophysiological explorations of the bilingual advantage: evidence from a Stroop task.

PubMed

Coderre, Emily L; van Heuven, Walter J B

2014-01-01

Bilinguals have been shown to exhibit a performance advantage on executive control tasks, outperforming their monolingual counterparts. Although a wealth of research has investigated this 'bilingual advantage' behaviourally, electrophysiological correlates are lacking. Using EEG with a Stroop task that manipulated the stimulus onset asynchrony (SOA) of word and colour presentation, the current study addressed two facets of the bilingual advantage. The possibility that bilinguals experience superior conflict processing relative to monolinguals (a 'conflict-specific advantage') was investigated by comparing behavioural interference effects as well as the amplitude of the Ninc, a conflict-related ERP component occurring from approximately 300-500 ms after the onset of conflict. In contrast, the hypothesis that bilinguals experience domain-general, conflict-independent enhancements in executive processing (a 'non-conflict-specific advantage') was evaluated by comparing the control condition (symbol strings) between groups. There was some significant, but inconsistent, evidence for a conflict-specific bilingual advantage. In contrast, strong evidence emerged for a non-conflict-specific advantage, with bilinguals demonstrating faster RTs and reduced ERP amplitudes on control trials compared to monolinguals. Importantly, when the control stimulus was presented before the colour, ERPs to control trials revealed group differences before the onset of conflict, suggesting differences in the ability to ignore or suppress distracting irrelevant information. This indicates that bilinguals experience superior executive processing even in the absence of conflict and semantic salience, and suggests that the advantage extends to more efficient proactive management of the environment.

A Kantian argument against comparatively advantageous genetic modification.

PubMed

Jensen, David

2011-08-01

The genetic modification of children is becoming a more likely possibility given our rapid progress in medical technologies. I argue, from a broadly Kantian point of view, that at least one kind of such modification-modification by a parent for the sake of a child's comparative advantage-is not rationally justified. To argue this, I first characterize a necessary condition on reasons and rational justification: what is a reason for an agent to do an action in one set of circumstances must be a reason for any in those circumstances to do the action. I then show that comparatively advantageous genetic modification violates this principle since a child's "getting ahead" through genetic modification cannot be rationally justified unless other children also could receive the modification, thus rendering the advantage useless. Finally, I consider the major objection to this it seems to disallow all cases of a parent's helping a child get ahead, something that parents normally engage in with their children. I argue that typical practices of developing a comparative advantage in a child, as well as practices of societal competition in general, do not conflict because they involve circumstances that mitigate the universal character of reasons. Many ordinary cases of competitive advantage that we think of as unjust, in fact, can be explained by my argument.

Planting structure adjustment and food security in major food production district: A case study on 10 main food production counties in Gansu Province, China

NASA Astrophysics Data System (ADS)

Wang, S. J.; Yang, C. L.; Zhou, L. Y.

2017-07-01

This paper made an empirical study on planting structure adjustment and food security, in which main data and information came from the questionnaires of 10 main food-production counties in Gansu Province, China. The investigation results showed that: 1) During 1995 and 2014, the cultivated land area per household dropped by 2.40%, in which food crop area declined by 3.16%, yet cash crop area increased by 129% in the survey area. In the same period, the revenue per household increased by 162.99%, while food income from the revenue only increased by 17.42%; 2) In Hexi and Longzhong districts, mean wheat crop area per household shows a downtrend, while cash crop area increased significantly in the past 20 years. Especially, the household food output and income did not appear a simultaneous increase trend. In Longdong district, the household food output and income showed a simultaneous uptrend, and household income came mainly from miscellaneous grain (e.g. sorghum, bean, buckwheat, etc.); 3) In order to pursue higher economic efficiency of cultivated land, the farmers were forced to adjust planting structure and develop characteristics industries, profitable agriculture and cash crop with comparative advantage, which resulted in few food stock and impacted seriously on regional food security.

Enhancing seismic P phase arrival picking based on wavelet denoising and kurtosis picker

NASA Astrophysics Data System (ADS)

Shang, Xueyi; Li, Xibing; Weng, Lei

2018-01-01

P phase arrival picking of weak signals is still challenging in seismology. A wavelet denoising is proposed to enhance seismic P phase arrival picking, and the kurtosis picker is applied on the wavelet-denoised signal to identify P phase arrival. It has been called the WD-K picker. The WD-K picker, which is different from those traditional wavelet-based pickers on the basis of a single wavelet component or certain main wavelet components, takes full advantage of the reconstruction of main detail wavelet components and the approximate wavelet component. The proposed WD-K picker considers more wavelet components and presents a better P phase arrival feature. The WD-K picker has been evaluated on 500 micro-seismic signals recorded in the Chinese Yongshaba mine. The comparison between the WD-K pickings and manual pickings shows the good picking accuracy of the WD-K picker. Furthermore, the WD-K picking performance has been compared with the main detail wavelet component combining-based kurtosis (WDC-K) picker, the single wavelet component-based kurtosis (SW-K) picker, and certain main wavelet component-based maximum kurtosis (MMW-K) picker. The comparison has demonstrated that the WD-K picker has better picking accuracy than the other three-wavelet and kurtosis-based pickers, thus showing the enhanced ability of wavelet denoising.

Application of the conjugate-gradient method to ground-water models

USGS Publications Warehouse

Manteuffel, T.A.; Grove, D.B.; Konikow, Leonard F.

1984-01-01

The conjugate-gradient method can solve efficiently and accurately finite-difference approximations to the ground-water flow equation. An aquifer-simulation model using the conjugate-gradient method was applied to a problem of ground-water flow in an alluvial aquifer at the Rocky Mountain Arsenal, Denver, Colorado. For this application, the accuracy and efficiency of the conjugate-gradient method compared favorably with other available methods for steady-state flow. However, its efficiency relative to other available methods depends on the nature of the specific problem. The main advantage of the conjugate-gradient method is that it does not require the use of iteration parameters, thereby eliminating this partly subjective procedure. (USGS)

Antimicrobial Activity of Bacteriocins and Their Applications

NASA Astrophysics Data System (ADS)

Drosinos, Eleftherios H.; Mataragas, Marios; Paramithiotis, Spiros

Bacteriocins are peptides or proteins that exert an antimicrobial action against a range of microorganisms. Their production can be related to the antagonism within a certain ecological niche, as the producer strain, being itself immune to its action, generally gains a competitive advantage. Many Gram-positive and Gram-negative microorganisms have been found to produce bacteriocins. The former, and especially the ones produced by lactic acid bacteria, has been the field of intensive research during the last decades mainly due to their properties that account for their suitability in food preservation and the benefits arising from that, and secondarily due to the broader inhibitory spectrum compared to the ones produced by Gramnegative microorganisms.

Research on dynamic characteristics of motor vibration isolation system through mechanical impedance method

NASA Astrophysics Data System (ADS)

Zhao, Xingqian; Xu, Wei; Shuai, Changgeng; Hu, Zechao

2017-12-01

A mechanical impedance model of a coupled motor-shaft-bearing system has been developed to predict the dynamic characteristics and partially validated by comparing the computing results with finite element method (FEM), including the comparison of displacement amplitude in x and z directions at the two ends of the flexible coupling, the comparison of normalized vertical reaction force in z direction at bearing pedestals. The results demonstrate that the developed model can precisely predict the dynamic characteristics and the main advantage of such a method is that it can clearly illustrate the vibration property of the motor subsystem, which plays an important role in the isolation system design.

Proposal of a Bulk HTSC Staggered Array Undulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kii, Toshiteru; Kinjo, Ryota; Bakr, Mahmoud A.

We proposed a new type of undulator based on bulk high-T{sub c} superconductors (HTSC) which consists of a single solenoid and a stacked array of bulk HTSC. The main advantage of this configuration is that a mechanical structure is not required to produce and control the undulator field. In order to perform a proof of principle experiment, we have developed a prototype of bulk HTSC staggered array undulator using 11 pairs of DyBaCuO bulk superconductors and a normal conducting solenoid. Experimental results obtained by using the prototype undulator and numerical results obtained by a loop current model based on themore » Bean mode for a type-II superconductor were compared.« less

A silicon-on-insulator complementary-metal-oxide-semiconductor compatible flexible electronics technology

NASA Astrophysics Data System (ADS)

Tu, Hongen; Xu, Yong

2012-07-01

This paper reports a simple flexible electronics technology that is compatible with silicon-on-insulator (SOI) complementary-metal-oxide-semiconductor (CMOS) processes. Compared with existing technologies such as direct fabrication on flexible substrates and transfer printing, the main advantage of this technology is its post-SOI-CMOS compatibility. Consequently, high-performance and high-density CMOS circuits can be first fabricated on SOI wafers using commercial foundry and then be integrated into flexible substrates. The yield is also improved by eliminating the transfer printing step. Furthermore, this technology allows the integration of various sensors and microfluidic devices. To prove the concept of this technology, flexible MOSFETs have been demonstrated.

Techniques of laparoscopic cholecystectomy: Nomenclature and selection

PubMed Central

Haribhakti, Sanjiv P.; Mistry, Jitendra H.

2015-01-01

There are more than 50 different techniques of laparoscopic cholecystectomy (LC) available in literature mainly due to modifications by surgeons in aim to improve postoperative outcome and cosmesis. These modifications include reduction in port size and/or number than what is used in standard LC. There is no uniform nomenclature to describe these different techniques so that it is not possible to compare the outcomes of different techniques. We brief the advantages and disadvantages of each of these techniques and suggest the situation where particular technique would be useful. We also propose a nomenclature which is easy to remember and apply, so that any future comparison will be possible between the techniques. PMID:25883450

Efficient modification of floral traits by heavy-ion beam irradiation on transgenic Torenia.

PubMed

Ohtsubo, Norihiro; Sasaki, Katsutomo; Aida, Ryutaro; Ryuto, Hiromichi; Ichida, Hiroyuki; Hayashi, Yoriko; Abe, Tomoko

2012-01-01

While heavy-ion beam irradiation is becoming popular technology for mutation breeding in Japan, the combination with genetic manipulation makes it more convenient to create greater variation in plant phenotypes. We have succeeded in producing over 200 varieties of transgenic torenia (Torenia fournieri Lind.) from over 2,400 regenerated plants by this procedure in only 2 years. Mutant phenotypes were observed mainly in flowers and showed wide variation in colour and shape. Higher mutation rates in the transgenics compared to those in wild type indicate the synergistic effect of genetic manipulation and heavy-ion beam irradiation, which might be advantageous to create greater variation in floral traits.

Comparison of three nondestructive and contactless techniques for investigations of recombination parameters on an example of silicon samples

NASA Astrophysics Data System (ADS)

Chrobak, Ł.; Maliński, M.

2018-06-01

This paper presents a comparison of three nondestructive and contactless techniques used for determination of recombination parameters of silicon samples. They are: photoacoustic method, modulated free carriers absorption method and the photothermal radiometry method. In the paper the experimental set-ups used for measurements of the recombination parameters in these methods as also theoretical models used for interpretation of obtained experimental data have been presented and described. The experimental results and their respective fits obtained with these nondestructive techniques are shown and discussed. The values of the recombination parameters obtained with these methods are also presented and compared. Main advantages and disadvantages of presented methods have been discussed.

[Hip resurfacing arthroplasty].

PubMed

Witzleb, W-C; Knecht, A; Beichler, T; Köhler, T; Günther, K-P

2004-11-01

In comparison to stemmed total hip replacements, hip resurfacing offers advantages especially in joint stability and amount of femoral bone resection. After the poor results achieved with this concept that were mainly caused by failure of the materials used, reintroduction of the metal-on-metal bearing initiated a renaissance. This bearing, the cementless cup, and the improved surgical technique led to better short- to medium-term results. Revision and complication rates are now comparable to conventional total hip replacements. The functional capacity of the method is higher. Because long-term results are not available, however, questions remain, for instance, the consequences of the higher metal ion serum concentrations or the impossibility of changing the inlay when femoral revision becomes necessary.

Moire technique utilization for detection and measurement of scoliosis

NASA Astrophysics Data System (ADS)

Zawieska, Dorota; Podlasiak, Piotr

1993-02-01

Moire projection method enables non-contact measurement of the shape or deformation of different surfaces and constructions by fringe pattern analysis. The fringe map acquisition of the whole surface of the object under test is one of the main advantages compared with 'point by point' methods. The computer analyzes the shape of the whole surface and next user can selected different points or cross section of the object map. In this paper a few typical examples of an application of the moire technique in solving different medical problems will be presented. We will also present to you the equipment the moire pattern analysis is done in real time using the phase stepping method with CCD camera.

Tracking control of concentration profiles in a fed-batch bioreactor using a linear algebra methodology.

PubMed

Rómoli, Santiago; Serrano, Mario Emanuel; Ortiz, Oscar Alberto; Vega, Jorge Rubén; Eduardo Scaglia, Gustavo Juan

2015-07-01

Based on a linear algebra approach, this paper aims at developing a novel control law able to track reference profiles that were previously-determined in the literature. A main advantage of the proposed strategy is that the control actions are obtained by solving a system of linear equations. The optimal controller parameters are selected through Monte Carlo Randomized Algorithm in order to minimize a proposed cost index. The controller performance is evaluated through several tests, and compared with other controller reported in the literature. Finally, a Monte Carlo Randomized Algorithm is conducted to assess the performance of the proposed controller. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Operationally efficient propulsion system study (OEPSS) data book. Volume 9; Preliminary Development Plan for an Integrated Booster Propulsion Module (BPM)

NASA Technical Reports Server (NTRS)

DiBlasi, Angelo G.

1992-01-01

A preliminary development plan for an integrated propulsion module (IPM) is described. The IPM, similar to the Space Transportation Main engine (STME) engine, is applicable to the Advanced Launch System (ALS) baseline vehicle. The same STME development program ground rules and time schedule were assumed for the IPM. However, the unique advantages of testing an integrated engine element, in terms of reduced number of hardware and number of system and reliability tests, compared to single standalone engine and MPTA, are highlighted. The potential ability of the IPM to meet the ALS program goals for robustness, operability and reliability is emphasized.

Microfabrication of curcumin-loaded microparticles using coaxial electrohydrodynamic atomization

NASA Astrophysics Data System (ADS)

Yuan, Shuai; Si, Ting; Liu, Zhongfa; Xu, Ronald X.

2014-03-01

Encapsulation of curcumin in PLGA microparticles is performed by a coaxial electrohydrodynamic atomization device. To optimize the process, the effects of different control parameters on morphology and size distribution of resultant microparticles are studied systemically. Four main flow modes are identified as the applied electric field intensity increases. The stable cone-jet configuration is found to be available for fabricating monodisperse microparticles with core-shell structures. The results are compared with those observed in traditional emulsion. The drug-loading efficiency is also checked. The present system is advantageous for the enhancement of particle size distribution and drug-loading efficiency in various applications such as drug delivery, biomedicine and image-guided therapy.

Home Advantage in Men's and Women's Spanish First and Second Division Water Polo Leagues.

PubMed

Prieto, Jaime; Gómez, Miguel-Ángel; Pollard, Richard

2013-01-01

The purpose of this study was to quantify the home advantage in both men's and women's First and Second Division water polo leagues, to compare the results obtained according to sex of participants and the level of competition, and to test for possible differences in home advantage when considering the interaction between these two factors. The sample comprised four seasons from 2007-2008 to 2010-2011 for a total of 1942 games analyzed. The results showed the existence of home advantage in both men's and women's First and Second Divisions. After controlling for the competitive balance of each league in each season, there was a significant difference between men's and women's leagues, with higher home advantage for men's leagues (58.60% compared with 53.70% for women's leagues). There was also a significant difference between the levels of competition, with greater home advantage for the Second Division (57.95% compared with 54.35% for First Division). No significant differences in home advantage were found when considering the interaction between sex of participants and the level of competition. The results in relation to sex of participants and the level of competition are consistent with previous studies in other sports such as football or handball.

Home Advantage in Men’s and Women’s Spanish First and Second Division Water Polo Leagues

PubMed Central

Prieto, Jaime; Gómez, Miguel-Ángel; Pollard, Richard

The purpose of this study was to quantify the home advantage in both men’s and women’s First and Second Division water polo leagues, to compare the results obtained according to sex of participants and the level of competition, and to test for possible differences in home advantage when considering the interaction between these two factors. The sample comprised four seasons from 2007–2008 to 2010–2011 for a total of 1942 games analyzed. The results showed the existence of home advantage in both men’s and women’s First and Second Divisions. After controlling for the competitive balance of each league in each season, there was a significant difference between men’s and women’s leagues, with higher home advantage for men’s leagues (58.60% compared with 53.70% for women’s leagues). There was also a significant difference between the levels of competition, with greater home advantage for the Second Division (57.95% compared with 54.35% for First Division). No significant differences in home advantage were found when considering the interaction between sex of participants and the level of competition. The results in relation to sex of participants and the level of competition are consistent with previous studies in other sports such as football or handball. PMID:24146714

Communication Based on Receptive Multilingualism: Advantages and Disadvantages

ERIC Educational Resources Information Center

Braunmüller, Kurt

2013-01-01

This paper tries to give answers for successful receptive multilingualism (RM) but also for its failure. It is mainly based on the results of two projects, one on inter-dialectal communication in the Baltic area during the era of the Hanseatic League and the other analyses inter-Scandinavian communication today. The main purpose of this survey is…

Chief Characteristics and Advantages of Tailless Airplanes

NASA Technical Reports Server (NTRS)

Dufaure De Lajarte, A

1936-01-01

This study will be concerned with the critical examination of two main questions, mainly, susceptibility of centering and more generally, the conditions of static stability, longitudinal equilibrium, and the question of dynamic stability, or at least the damping of longitudinal vibrations about a position of equilibrium that may result from a small variation in the angle of attack.

Comparison of connectivity analyses for resting state EEG data

NASA Astrophysics Data System (ADS)

Olejarczyk, Elzbieta; Marzetti, Laura; Pizzella, Vittorio; Zappasodi, Filippo

2017-06-01

Objective. In the present work, a nonlinear measure (transfer entropy, TE) was used in a multivariate approach for the analysis of effective connectivity in high density resting state EEG data in eyes open and eyes closed. Advantages of the multivariate approach in comparison to the bivariate one were tested. Moreover, the multivariate TE was compared to an effective linear measure, i.e. directed transfer function (DTF). Finally, the existence of a relationship between the information transfer and the level of brain synchronization as measured by phase synchronization value (PLV) was investigated. Approach. The comparison between the connectivity measures, i.e. bivariate versus multivariate TE, TE versus DTF, TE versus PLV, was performed by means of statistical analysis of indexes based on graph theory. Main results. The multivariate approach is less sensitive to false indirect connections with respect to the bivariate estimates. The multivariate TE differentiated better between eyes closed and eyes open conditions compared to DTF. Moreover, the multivariate TE evidenced non-linear phenomena in information transfer, which are not evidenced by the use of DTF. We also showed that the target of information flow, in particular the frontal region, is an area of greater brain synchronization. Significance. Comparison of different connectivity analysis methods pointed to the advantages of nonlinear methods, and indicated a relationship existing between the flow of information and the level of synchronization of the brain.

CT with monochromatic synchrotron x rays and its potential in clinical research

NASA Astrophysics Data System (ADS)

Dilmanian, F. Avraham; Wu, Xiaoye; Ren, Baorui; Button, Terry M.; Chapman, L. D.; Dobbs, John M.; Huang, Xiaoling; Nickoloff, Edward L.; Parsons, Edward C., Jr.; Petersen, Michael J.; Thomlinson, William C.; Zhong, Zhong

1997-10-01

A monochromatic CT for imaging the human head and neck is being developed at the National Synchrotron Light Source. We compared the performance of this system, multiple energy computed tomography (MECT), with that of a conventional CT (CCT) using phantoms. The advantage in image contrast of MECT, with its beam energy tuned just above the K-edge of contrast element, over CCT carried out at 120 kVp, was approximately equal to 3.2-fold for iodine and approximately equal to 2.2 fold for gadolinium. Image noise was compared by simulations because this comparison requires matching the spatial resolutions of the two systems. Simulations at a 3- rad dose and 3-mm slice height on an 18-cm-diameter acrylic phantom, with MECT operating at 60.5 keV, showed that image noise for MECT was 1.4 HU vs. 1.8 HU for CCT. Simulations in the dual-energy quantitative CT mode showed a two-fold advantage for MECT in image noise, as well as its superior quantification. MECT operated in the planar mode revealed fatty tissue in the body of a rat using xenon K-edge subtraction. Our initial pan for clinical application of the system is to image the composition of carotid artery plaques non-invasively, separating the plaques' main constituents: the fatty, fibrous, and calcified tissues.

Surface flatness measurement of quasi-parallel plates employing three-beam interference with strong reference beam

NASA Astrophysics Data System (ADS)

Sunderland, Zofia; Patorski, Krzysztof

2016-12-01

A big challenge for standard interferogram analysis methods such as Temporal Phase Shifting or Fourier Transform is a parasitic set of fringes which might occur in the analyzed fringe pattern intensity distribution. It is encountered, for example, when transparent glass plates with quasi-parallel surfaces are tested in Fizeau or Twyman-Green interferometers. Besides the beams reflected from the plate front surface and the interferometer reference the beam reflected from the plate rear surface also plays important role; its amplitude is comparable with the amplitude of other beams. In result we face three families of fringes of high contrast which cannot be easily separated. Earlier we proposed a competitive solution for flatness measurements which relies on eliminating one of those fringe sets from the three-beam interferogram and separating two remaining ones with the use of 2D Continuous Wavelet Transform. In this work we cover the case when the intensity of the reference beam is significantly higher than the intensities of two object beams. The main advantage of differentiating beam intensities is the change in contrast of individual fringe families. Processing of such three-beam interferograms is modified but also takes advantage of 2D CWT. We show how to implement this method in Twyman-Green and Fizeau setups and compare this processing path and measurement procedures with previously proposed solutions.

Soluble polymer conjugates for drug delivery.

PubMed

Minko, Tamara

2005-01-01

The use of water-soluble polymeric conjugates as drug carriers offers several possible advantages. These advantages include: (1) improved drug pharmacokinetics; (2) decreased toxicity to healthy organs; (3) possible facilitation of accumulation and preferential uptake by targeted cells; (4) programmed profile of drug release. In this review, we will consider the main types of useful polymeric conjugates and their role and effectiveness as carriers in drug delivery systems.: © 2005 Elsevier Ltd . All rights reserved.

NE Won't Return to Pre-Recession Employment until 2015, but Region's "Education" Advantage Could Offer "Economic" Advantage

ERIC Educational Resources Information Center

Gittell, Ross

2012-01-01

The New England states continue to experience slow growth and slow recovery of the jobs lost in the 2008 to 2009 recession. The main reason for this is the continued weakness in global and U.S. economic conditions. The U.S. and New England economies continue to be affected by the weak European economy and sovereign debt crisis and by weakness in…

Reactive multi-particle collision dynamics with reactive boundary conditions

NASA Astrophysics Data System (ADS)

Sayyidmousavi, Alireza; Rohlf, Katrin

2018-07-01

In the present study, an off-lattice particle-based method called the reactive multi-particle collision (RMPC) dynamics is extended to model reaction-diffusion systems with reactive boundary conditions in which the a priori diffusion coefficient of the particles needs to be maintained throughout the simulation. To this end, the authors have made use of the so-called bath particles whose purpose is only to ensure proper diffusion of the main particles in the system. In order to model partial adsorption by a reactive boundary in the RMPC, the probability of a particle being adsorbed, once it hits the boundary, is calculated by drawing an analogy between the RMPC and Brownian Dynamics. The main advantages of the RMPC compared to other molecular based methods are less computational cost as well as conservation of mass, energy and momentum in the collision and free streaming steps. The proposed approach is tested on three reaction-diffusion systems and very good agreement with the solutions to their corresponding partial differential equations is observed.

Evaluation of space shuttle main engine fluid dynamic frequency response characteristics

NASA Technical Reports Server (NTRS)

Gardner, T. G.

1980-01-01

In order to determine the POGO stability characteristics of the space shuttle main engine liquid oxygen (LOX) system, the fluid dynamic frequency response functions between elements in the SSME LOX system was evaluated, both analytically and experimentally. For the experimental data evaluation, a software package was written for the Hewlett-Packard 5451C Fourier analyzer. The POGO analysis software is documented and consists of five separate segments. Each segment is stored on the 5451C disc as an individual program and performs its own unique function. Two separate data reduction methods, a signal calibration, coherence or pulser signal based frequency response function blanking, and automatic plotting features are included in the program. The 5451C allows variable parameter transfer from program to program. This feature is used to advantage and requires only minimal user interface during the data reduction process. Experimental results are included and compared with the analytical predictions in order to adjust the general model and arrive at a realistic simulation of the POGO characteristics.

Lessons Learned from using a Livingstone Model to Diagnose a Main Propulsion System

NASA Technical Reports Server (NTRS)

Sweet, Adam; Bajwa, Anupa

2003-01-01

NASA researchers have demonstrated that qualitative, model-based reasoning can be used for fault detection in a Main Propulsion System (MPS), a complex, continuous system. At the heart of this diagnostic system is Livingstone, a discrete, propositional logic-based inference engine. Livingstone comprises a language for specifying a discrete model of the system and a set of algorithms that use the model to track the system's state. Livingstone uses the model to test assumptions about the state of a component - observations from the system are compared with values predicted by the model. The intent of this paper is to summarize some advantages of Livingstone seen through our modeling experience: for instance, flexibility in modeling, speed and maturity. We also describe some shortcomings we perceived in the implementation of Livingstone, such as modeling continuous dynamics and handling of transients. We list some upcoming enhancements to the next version of Livingstone that may resolve some of the current limitations.

Chitin and Chitosan Preparation from Marine Sources. Structure, Properties and Applications

PubMed Central

Younes, Islem; Rinaudo, Marguerite

2015-01-01

This review describes the most common methods for recovery of chitin from marine organisms. In depth, both enzymatic and chemical treatments for the step of deproteinization are compared, as well as different conditions for demineralization. The conditions of chitosan preparation are also discussed, since they significantly impact the synthesis of chitosan with varying degree of acetylation (DA) and molecular weight (MW). In addition, the main characterization techniques applied for chitin and chitosan are recalled, pointing out the role of their solubility in relation with the chemical structure (mainly the acetyl group distribution along the backbone). Biological activities are also presented, such as: antibacterial, antifungal, antitumor and antioxidant. Interestingly, the relationship between chemical structure and biological activity is demonstrated for chitosan molecules with different DA and MW and homogeneous distribution of acetyl groups for the first time. In the end, several selected pharmaceutical and biomedical applications are presented, in which chitin and chitosan are recognized as new biomaterials taking advantage of their biocompatibility and biodegradability. PMID:25738328

Recent developments in biohythane production from household food wastes: A review.

PubMed

Bolzonella, David; Battista, Federico; Cavinato, Cristina; Gottardo, Marco; Micolucci, Federico; Lyberatos, Gerasimos; Pavan, Paolo

2018-06-01

Biohythane is a hydrogen-methane blend with hydrogen concentration between 10 and 30% v/v. It can be produced from different organic substrates by two sequential anaerobic stages: a dark fermentation step followed by a second an anaerobic digestion step, for hydrogen and methane production, respectively. The advantages of this blend compared to either hydrogen or methane, as separate biofuels, are first presented in this work. The two-stage anaerobic process and the main operative parameters are then discussed. Attention is focused on the production of biohythane from household food wastes, one of the most abundant organic substrate available for anaerobic digestion: the main milestones and the future trends are exposed. In particular, the possibility to co-digest food wastes and sewage sludge to improve the process yield is discussed. Finally, the paper illustrates the developments of biohythane application in the automotive sector as well as its reduced environmental burden. Copyright © 2018 Elsevier Ltd. All rights reserved.

Clinical and logopaedic results of simultaneous and sequential bilateral implants in children with severe and/or profound bilateral sensorineural hearing loss: A literature review.

PubMed

López-Torrijo, Manuel; Mengual-Andrés, Santiago; Estellés-Ferrer, Remedios

2015-06-01

This article carries out a literature review of the advantages and limitations of the simultaneous bilateral cochlear implantation (SCI) compared to those of the sequential bilateral cochlear implantation (SBCI) and the unilateral cochlear implantation (UCI). The variables analysed in said comparison are: safety and surgical technique, SCI incidence, effectiveness, impact of the inter-implant interval, costs and financing, impact on brain plasticity, impact on speech and language development, main benefits, main disadvantages and concerns, and predictive factors of prognosis. Although the results are not conclusive, all variables analysed seem to point towards observable benefits of SCI in comparison with SBCI or UCI. This tendency should be studied in more depth in multicentre studies with higher methodological rigour, more comprehensive samples and periods and other determining variables (age at the time of implantation, duration and degree of the hearing loss, rehabilitation methodologies used, family involvement, etc.). Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Centrifuge Controlled Shape Tuning of Biosynthesized Gold Nanoparticles Obtained from Plumbago zeylanica Leaf Extract.

PubMed

Ankamwar, Balaprasad; Pansare, Sachin; Sur, Ujjal Kumar

2017-02-01

Development of cost-efficient and eco-friendly biogenic synthetic protocols for the green synthesis of biocompatible metal nanoparticles has become popular among researchers in recent years. The biogenic synthesis of these nanoparticles and their potential biomedical applications introduces the concept of nanobiotechnology, which has become the latest fascinating area of research. The lower cost and lesser side effects as compare to chemical methods of synthesis are the main advantages of biosynthesis. In the present investigation, aqueous leaf extract of Plumbago zeylanica had been used to synthesize anisotropic gold nanoparticles. The as-synthesized gold nanoparticles were centrifuged at 5000 and 10000 rpm and compared both pellets using UV-visible spectroscopy, XRD, FTIR and TEM techniques. We have studied here the effect of speed of centrifugation on the yield, shape, size as well as size distribution of as synthesized gold nanoparticles.

Applying the X-ray diffraction analysis for estimating the height and width of nanorods in low symmetry crystal multiphase materials

NASA Astrophysics Data System (ADS)

Mokhtari, Ali; Soleimanian, Vishtasb; Dehkordi, Hamed Aleebrahim; Dastafkan, Kamran

2017-11-01

In this work the potential of Rietveld refinement procedure is used to study the shape and size of non-spherical nanocrystallites. The main advantages of this approach are that not only it can successfully extend to all nanomaterials with different crystal symmetries but also it can evaluate the various phases of multiple materials comparing to electron microscopy methods. Therefore, between seven crystal systems, the formulation of monoclinic and hexagonal crystals is developed. This procedure is applied for the mixture of sodium carbonate and zinc oxide nanocrystallites at different fractions of doped gadolinium oxide. It is found that the crystallites of sodium carbonate and zinc oxide have the rod and ellipsoidal shapes, respectively. The microstructure results are compared with the results of scanning electron microscopy imaging. Good agreement is achieved between the results of scanning electron microscopy and Rietveld methods.

Current Readings: Single Versus Bilateral Internal Mammary Artery in Coronary Artery Bypass Grafting.

PubMed

Ejiofor, Julius I; Kaneko, Tsuyoshi; Aranki, Sary F

2018-06-24

There is strong retrospective data demonstrating that BIMA grafting leads to better long-term survival as compared to LIMA grafting. However, this survival advantage was not corroborated by the interim results of the Arterial Revascularization Trial(ART). Today, there are barriers to widespread adoption of BIMA grafting. One of the main disadvantages of the use of BIMA grafts is the higher risk of DSWI. Deep sternal wound infections can be minimized by skeletonized harvesting of the IMA grafts, which preserves blood flow to the sternum. Also, utilizing the BIMA graft as a "Y" graft may lead to more complete revascularization compared to its in-situ use. BIMA grafting on average takes 25 minutes longer operating time with a higher in-hospital costs. We eagerly await the 10-year results of the ART trial to determine the truly unbiased randomized long-term effectiveness of BIMA grafting. Copyright © 2018 Elsevier Ltd. All rights reserved.

Problem-based learning in laboratory medicine resident education: a satisfaction survey.

PubMed

Lepiller, Quentin; Solis, Morgane; Velay, Aurélie; Gantner, Pierre; Sueur, Charlotte; Stoll-Keller, Françoise; Barth, Heidi; Fafi-Kremer, Samira

2017-04-01

Theoretical knowledge in biology and medicine plays a substantial role in laboratory medicine resident education. In this study, we assessed the contribution of problem-based learning (PBL) to improve the training of laboratory medicine residents during their internship in the department of virology, Strasbourg University Hospital, France. We compared the residents' satisfaction regarding an educational program based on PBL and a program based on lectures and presentations. PBL induced a high level of satisfaction (100%) among residents compared to lectures and presentations (53%). The main advantages of this technique were to create a situational interest regarding virological problems, to boost the residents' motivation and to help them identify the most relevant learning objectives in virology. However, it appears pertinent to educate the residents in appropriate bibliographic research techniques prior to PBL use and to monitor their learning by regular formative assessment sessions.

Generalized sample entropy analysis for traffic signals based on similarity measure

NASA Astrophysics Data System (ADS)

Shang, Du; Xu, Mengjia; Shang, Pengjian

2017-05-01

Sample entropy is a prevailing method used to quantify the complexity of a time series. In this paper a modified method of generalized sample entropy and surrogate data analysis is proposed as a new measure to assess the complexity of a complex dynamical system such as traffic signals. The method based on similarity distance presents a different way of signals patterns match showing distinct behaviors of complexity. Simulations are conducted over synthetic data and traffic signals for providing the comparative study, which is provided to show the power of the new method. Compared with previous sample entropy and surrogate data analysis, the new method has two main advantages. The first one is that it overcomes the limitation about the relationship between the dimension parameter and the length of series. The second one is that the modified sample entropy functions can be used to quantitatively distinguish time series from different complex systems by the similar measure.

Conservative versus invasive stable ischemic heart disease management strategies: what do we plan to learn from the ISCHEMIA trial?

PubMed

Cheng-Torres, Kathleen A; Desai, Karan P; Sidhu, Mandeep S; Maron, David J; Boden, William E

2016-01-01

Over the past decade, landmark randomized clinical trials comparing initial management strategies in stable ischemic heart disease (SIHD) have demonstrated no significant reduction in 'hard' end points (all-cause mortality, cardiac death or myocardial infarction) with one strategy versus another. The main advantage derived from early revascularization is improved short-term quality of life. Nonetheless, questions remain regarding how best to manage SIHD patients, such as whether a high-risk subgroup can be identified that may experience a survival or myocardial infarction benefit from early revascularization, and if not, when should diagnostic catheterization and revascularization be performed. The International Study of Comparative Health Effectiveness with Medical and Invasive Approaches trial is designed to address these questions by randomizing SIHD patients with at least moderate ischemia to an initial conservative strategy of optimal medical therapy or an initial invasive strategy of optimal medical therapy plus cardiac catheterization and revascularization.

Auditory and visual cortex of primates: a comparison of two sensory systems

PubMed Central

Rauschecker, Josef P.

2014-01-01

A comparative view of the brain, comparing related functions across species and sensory systems, offers a number of advantages. In particular, it allows separating the formal purpose of a model structure from its implementation in specific brains. Models of auditory cortical processing can be conceived by analogy to the visual cortex, incorporating neural mechanisms that are found in both the visual and auditory systems. Examples of such canonical features on the columnar level are direction selectivity, size/bandwidth selectivity, as well as receptive fields with segregated versus overlapping on- and off-sub-regions. On a larger scale, parallel processing pathways have been envisioned that represent the two main facets of sensory perception: 1) identification of objects and 2) processing of space. Expanding this model in terms of sensorimotor integration and control offers an overarching view of cortical function independent of sensory modality. PMID:25728177

Cytometric methods for measuring bacteria in water: advantages, pitfalls and applications.

PubMed

Hammes, Frederik; Egli, Thomas

2010-06-01

Rapid detection of microbial cells is a challenge in microbiology, particularly when complex indigenous communities or subpopulations varying in viability, activity and physiological state are investigated. Flow cytometry (FCM) has developed during the last 30 years into a multidisciplinary technique for analysing bacteria. When used correctly, FCM can provide a broad range of information at the single-cell level, including (but not limited to) total counts, size measurements, nucleic acid content, cell viability and activity, and detection of specific bacterial groups or species. The main advantage of FCM is that it is fast and easy to perform. It is a robust technique, which is adaptable to different types of samples and methods, and has much potential for automation. Hence, numerous FCM applications have emerged in industrial biotechnology, food and pharmaceutical quality control, routine monitoring of drinking water and wastewater systems, and microbial ecological research in soils and natural aquatic habitats. This review focuses on the information that can be gained from the analysis of bacteria in water, highlighting some of the main advantages, pitfalls and applications.

Preparedness of fire safety in underground train station: Comparison between train operators in Malaysia with other operators from the developed countries

NASA Astrophysics Data System (ADS)

Tajedi, Noor Aqilah A.; Sukor, Nur Sabahiah A.; Ismail, Mohd Ashraf M.; Shamsudin, Shahrul A.

2017-10-01

The purpose of this paper is to compare the fire evacuation plan and preparation at the underground train stations in the different countries. The methodology for this study was using the extended questionnaire survey to investigate the Rapid Rail Sdn Bhd, Malaysia's fire safety plan and preparation at the underground train stations. There were four sections in the questionnaire which included (i) background of the respondents, (ii) the details on the train stations, safety instruction and fire evacuation exercises (iii) technical systems, installation and equipment at the underground stations and (iv) procedures and technical changes related to fire safety that had been applied by the operators. Previously, the respondents from the different train operator services in the developed countries had completed the questionnaires. This paper extends the response from the Rapid Rail Sdn Bhd to compare the emergency procedures and preparation for fire event with the developed countries. As a result, this study found that the equipment and facilities that provided at the underground train stations that operated by Rapid Rail are relevant for fire safety procedures and needs. The main advantage for Rapid Rail is the underground stations were designed with two or more entrances/exits that may perform better evacuation compare to one main entrance/exit train stations in the other developed countries.

Monitoring Processes in Visual Search Enhanced by Professional Experience: The Case of Orange Quality-Control Workers

PubMed Central

Visalli, Antonino; Vallesi, Antonino

2018-01-01

Visual search tasks have often been used to investigate how cognitive processes change with expertise. Several studies have shown visual experts' advantages in detecting objects related to their expertise. Here, we tried to extend these findings by investigating whether professional search experience could boost top-down monitoring processes involved in visual search, independently of advantages specific to objects of expertise. To this aim, we recruited a group of quality-control workers employed in citrus farms. Given the specific features of this type of job, we expected that the extensive employment of monitoring mechanisms during orange selection could enhance these mechanisms even in search situations in which orange-related expertise is not suitable. To test this hypothesis, we compared performance of our experimental group and of a well-matched control group on a computerized visual search task. In one block the target was an orange (expertise target) while in the other block the target was a Smurfette doll (neutral target). The a priori hypothesis was to find an advantage for quality-controllers in those situations in which monitoring was especially involved, that is, when deciding the presence/absence of the target required a more extensive inspection of the search array. Results were consistent with our hypothesis. Quality-controllers were faster in those conditions that extensively required monitoring processes, specifically, the Smurfette-present and both target-absent conditions. No differences emerged in the orange-present condition, which resulted to mainly rely on bottom-up processes. These results suggest that top-down processes in visual search can be enhanced through immersive real-life experience beyond visual expertise advantages. PMID:29497392

UAV Deployment Exercise for Mapping Purposes: Evaluation of Emergency Response Applications.

PubMed

Boccardo, Piero; Chiabrando, Filiberto; Dutto, Furio; Tonolo, Fabio Giulio; Lingua, Andrea

2015-07-02

Exploiting the decrease of costs related to UAV technology, the humanitarian community started piloting the use of similar systems in humanitarian crises several years ago in different application fields, i.e., disaster mapping and information gathering, community capacity building, logistics and even transportation of goods. Part of the author's group, composed of researchers in the field of applied geomatics, has been piloting the use of UAVs since 2006, with a specific focus on disaster management application. In the framework of such activities, a UAV deployment exercise was jointly organized with the Regional Civil Protection authority, mainly aimed at assessing the operational procedures to deploy UAVs for mapping purposes and the usability of the acquired data in an emergency response context. In the paper the technical features of the UAV platforms will be described, comparing the main advantages/disadvantages of fixed-wing versus rotor platforms. The main phases of the adopted operational procedure will be discussed and assessed especially in terms of time required to carry out each step, highlighting potential bottlenecks and in view of the national regulation framework, which is rapidly evolving. Different methodologies for the processing of the acquired data will be described and discussed, evaluating the fitness for emergency response applications.

A comparative analysis of sex change in Labridae supports the size advantage hypothesis.

PubMed

Kazancioğlu, Erem; Alonzo, Suzanne H

2010-08-01

The size advantage hypothesis (SAH) predicts that the rate of increase in male and female fitness with size (the size advantage) drives the evolution of sequential hermaphroditism or sex change. Despite qualitative agreement between empirical patterns and SAH, only one comparative study tested SAH quantitatively. Here, we perform the first comparative analysis of sex change in Labridae, a group of hermaphroditic and dioecious (non-sex changer) fish with several model sex-changing species. We also estimate, for the first time, rates of evolutionary transitions between sex change and dioecy. Our analyses support SAH and indicate that the evolution of hermaphroditism is correlated to the size advantage. Furthermore, we find that transitions from sex change to dioecy are less likely under stronger size advantage. We cannot determine, however, how the size advantage affects transitions from dioecy to sex change. Finally, contrary to what is generally expected, we find that transitions from dioecy to sex change are more likely than transitions from sex change to dioecy. The similarity of sexual differentiation in hermaphroditic and dioecious labrids might underlie this pattern. We suggest that elucidating the developmental basis of sex change is critical to predict and explain patterns of the evolutionary history of sequential hermaphroditism.

PubMed Central

Baum, S.; Sillem, M.; Ney, J. T.; Baum, A.; Friedrich, M.; Radosa, J.; Kramer, K. M.; Gronwald, B.; Gottschling, S.; Solomayer, E. F.; Rody, A.; Joukhadar, R.

2017-01-01

Introduction Minimally invasive operative techniques are being used increasingly in gynaecological surgery. The expansion of the laparoscopic operation spectrum is in part the result of improved imaging. This study investigates the practical advantages of using 3D cameras in routine surgical practice. Materials and Methods Two different 3-dimensional camera systems were compared with a 2-dimensional HD system; the operating surgeonʼs experiences were documented immediately postoperatively using a questionnaire. Results Significant advantages were reported for suturing and cutting of anatomical structures when using the 3D compared to 2D camera systems. There was only a slight advantage for coagulating. The use of 3D cameras significantly improved the general operative visibility and in particular the representation of spacial depth compared to 2-dimensional images. There was not a significant advantage for image width. Depiction of adhesions and retroperitoneal neural structures was significantly improved by the stereoscopic cameras, though this did not apply to blood vessels, ureter, uterus or ovaries. Conclusion 3-dimensional cameras were particularly advantageous for the depiction of fine anatomical structures due to improved spacial depth representation compared to 2D systems. 3D cameras provide the operating surgeon with a monitor image that more closely resembles actual anatomy, thus simplifying laparoscopic procedures. PMID:28190888

Effectiveness of footwear and foot orthoses for calcaneal apophysitis: a 12-month factorial randomised trial.

PubMed

James, Alicia M; Williams, Cylie M; Haines, Terry P

2016-10-01

Calcaneal apophysitis, is a relatively common cause of heel pain in children. Very few randomised studies have evaluated treatment options. This trial compared the effectiveness of currently employed treatment options for the relief of pain and disability associated with calcaneal apophysitis. Factorial 2×2 randomised comparative effectiveness trial with 1, 2, 6 and 12-month follow-up. Participants were recruited from the caseload of podiatrists at Monash health and Peninsula Health. Children aged 8-14 years with clinically diagnosed calcaneal apophysitis. Treatment factor 1: two different types of in-shoe orthoses: a heel raise or prefabricated orthoses. Treatment factor 2: footwear replacement or no footwear replacement. Our primary outcome was functional disability, the secondary outcomes were pain and ankle dorsiflexion range. A total of 133 children and their parents responded to the recruitment advertisement, 124 participated in the trial.At the 1 and 2-month follow-up points, there was a main effect of the shoe insert (heel raise) in only the physical domain for the Oxford ankle foot questionnaire (p=0.04). At the 6 and 12-month follow-up points, there was no main effect or interaction effect for any outcome measure. This trial indicates at the 2-month time point there is a relative advantage in the use of heel raises over prefabricated orthoses for the treatment for calcaneal apophysitis. At 12 months there was no relative advantage to any one of the investigated treatment choices over another. Therefore, if a physical impact is experienced for greater than 2 months, the selection of treatment choice may defer to clinical judgement, cost-minimisation and or patient preference. ACTRN12609000696291. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The PIAA Coronagraph Prototype: First Laboratory Results.

NASA Astrophysics Data System (ADS)

Pluzhnik, Eugene; Guyon, O.; Colley, S.; Gallet, B.; Ridgway, S.; Woodruff, R.; Tanaka, S.; Warren, M.

2006-12-01

The phase-induced amplitude apodization (PIAA) coronagraph combines the main advantages of classical pupil apodization with high throughput ( 100%), high angular resolution ( 2λ/D) and low chromaticity. These advantages can allow direct imaging of nearby extrasolar planets with a 4-meter telescope. The PIAA coronagraph laboratory prototype has been successfully manufactured and starts to operate at the Subary Telescope facility. We present here our first laboratory results with this prototype where we have achieved 2x10-6 contrast within 2 λ/D. We also discuss the main constrains limiting the contrast and describe our future efforts. This work was carried out under JPL contract numbers 1254445 and 1257767 for Development of Technologies for the Terrestrial Planet Finder Mission, with the support and hospitality of the National Astronomical Observatory of Japan.

Competitive Advantage and its Sources in an Evolving Market

NASA Astrophysics Data System (ADS)

Zaridis, Apostolos D.

2009-08-01

In a continuously altered and evolving Market, as is the food manufacturing market, the main and long-lasting objective of firm that is the maximization of its wealth and consequently the continuous remaining in profit regions, appears that it is possible to be achieved via the obtainment and maintenance of diachronically long-term competitive advantage, which it will render the firm unique or leader force in a inexorable competition that is continuously extended in a globalized market. Various definitions and different regards are developed in regard to the competitive advantage and the way with which a firm it is possible, acquiring it, to star in the market in which it is activated. As result of sustainable competitive advantage in a firm comes the above the average performance. Abundance of resources and competences that are proposed as sources of competitive advantage in the resource-based view literature exists, while they are added continuously new based on empiric studies. In any case, it appears to suffer hierarchy of sources of competitive advantage, with regard to sustainability of these.

Night vision: requirements and possible roadmap for FIR and NIR systems

NASA Astrophysics Data System (ADS)

Källhammer, Jan-Erik

2006-04-01

A night vision system must increase visibility in situations where only low beam headlights can be used today. As pedestrians and animals have the highest risk increase in night time traffic due to darkness, the ability of detecting those objects should be the main performance criteria, and the system must remain effective when facing the headlights of oncoming vehicles. Far infrared system has been shown to be superior to near infrared system in terms of pedestrian detection distance. Near infrared images were rated to have significantly higher visual clutter compared with far infrared images. Visual clutter has been shown to correlate with reduction in detection distance of pedestrians. Far infrared images are perceived as being more unusual and therefore more difficult to interpret, although the image appearance is likely related to the lower visual clutter. However, the main issue comparing the two technologies should be how well they solve the driver's problem with insufficient visibility under low beam conditions, especially of pedestrians and other vulnerable road users. With the addition of an automatic detection aid, a main issue will be whether the advantage of FIR systems will vanish given NIR systems with well performing automatic pedestrian detection functionality. The first night vision introductions did not generate the sales volumes initially expected. A renewed interest in night vision systems are however to be expected after the release of night vision systems by BMW, Mercedes and Honda, the latter with automatic pedestrian detection.

GRID-BASED EXPLORATION OF COSMOLOGICAL PARAMETER SPACE WITH SNAKE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mikkelsen, K.; Næss, S. K.; Eriksen, H. K., E-mail: kristin.mikkelsen@astro.uio.no

2013-11-10

We present a fully parallelized grid-based parameter estimation algorithm for investigating multidimensional likelihoods called Snake, and apply it to cosmological parameter estimation. The basic idea is to map out the likelihood grid-cell by grid-cell according to decreasing likelihood, and stop when a certain threshold has been reached. This approach improves vastly on the 'curse of dimensionality' problem plaguing standard grid-based parameter estimation simply by disregarding grid cells with negligible likelihood. The main advantages of this method compared to standard Metropolis-Hastings Markov Chain Monte Carlo methods include (1) trivial extraction of arbitrary conditional distributions; (2) direct access to Bayesian evidences; (3)more » better sampling of the tails of the distribution; and (4) nearly perfect parallelization scaling. The main disadvantage is, as in the case of brute-force grid-based evaluation, a dependency on the number of parameters, N{sub par}. One of the main goals of the present paper is to determine how large N{sub par} can be, while still maintaining reasonable computational efficiency; we find that N{sub par} = 12 is well within the capabilities of the method. The performance of the code is tested by comparing cosmological parameters estimated using Snake and the WMAP-7 data with those obtained using CosmoMC, the current standard code in the field. We find fully consistent results, with similar computational expenses, but shorter wall time due to the perfect parallelization scheme.« less

Long-term information and distributed neural activation are relevant for the "internal features advantage" in face processing: electrophysiological and source reconstruction evidence.

PubMed

Olivares, Ela I; Saavedra, Cristina; Trujillo-Barreto, Nelson J; Iglesias, Jaime

2013-01-01

In face processing tasks, prior presentation of internal facial features, when compared with external ones, facilitates the recognition of subsequently displayed familiar faces. In a previous ERP study (Olivares & Iglesias, 2010) we found a visibly larger N400-like effect when identity mismatch familiar faces were preceded by internal features, as compared to prior presentation of external ones. In the present study we contrasted the processing of familiar and unfamiliar faces in the face-feature matching task to assess whether the so-called "internal features advantage" relies mainly on the use of stored face-identity-related information or if it might operate independently from stimulus familiarity. Our participants (N = 24) achieved better performance with internal features as primes and, significantly, with familiar faces. Importantly, ERPs elicited by identity mismatch complete faces displayed a negativity around 300-600 msec which was clearly enhanced for familiar faces primed by internal features when compared with the other experimental conditions. Source reconstruction showed incremented activity elicited by familiar stimuli in both posterior (ventral occipitotemporal) and more anterior (parahippocampal (ParaHIP) and orbitofrontal) brain regions. The activity elicited by unfamiliar stimuli was, in general, located in more posterior regions. Our findings suggest that the activation of multiple neural codes is required for optimal individuation in face-feature matching and that a cortical network related to long-term information for face-identity processing seems to support the internal feature effect. Copyright © 2013 Elsevier Ltd. All rights reserved.

Multidimensional chromatography in food analysis.

PubMed

Herrero, Miguel; Ibáñez, Elena; Cifuentes, Alejandro; Bernal, Jose

2009-10-23

In this work, the main developments and applications of multidimensional chromatographic techniques in food analysis are reviewed. Different aspects related to the existing couplings involving chromatographic techniques are examined. These couplings include multidimensional GC, multidimensional LC, multidimensional SFC as well as all their possible combinations. Main advantages and drawbacks of each coupling are critically discussed and their key applications in food analysis described.

Novel, Solvent-Free, Single Ion-Conductive Polymer Electrolytes

DTIC Science & Technology

2008-02-01

tetrahedron structure wherein no hydrogen is present. The main advantage of the use of LiBOB salt is the high ionic conductivity at low-ambient...In addition to its plasticizing effect, the LiBOB salt offers other important advantages such as: no risk of production of harmful gases and/or...6 to the (120) reflection. Increase of CP concentration up to 1:0.5 salt -to-additive ratio in the SiO2-containing PE is followed by a

A Performance Comparison of Xenon and Krypton Propellant on an SPT-100 Hall Thruster (Preprint)

DTIC Science & Technology

2011-08-10

plume data from electrostatic probes. This paper presents the results of performance measurements made using an inverted pendulum thrust stand. Krypton...inverted pendulum thrust stand. Krypton operating conditions were tested over a large range of operating powers from 800 W to 3.9 kW. Analysis of how...advantages for missions where high thrust at reduced specific impulse is advantageous, primarily for orbit raising missions. Bismuth’s main drawback is

Experimental study of main rotor tip geometry and tail rotor interactions in hover. Volume 2: Run log and tabulated data

NASA Technical Reports Server (NTRS)

Balch, D. T.; Lombardi, J.

1985-01-01

A model scale hover test was conducted in the Sikorsky Aircraft Model Rotor hover Facility to identify and quantify the impact of the tail rotor on the demonstrated advantages of advanced geometry tip configurations. The existence of mutual interference between hovering main rotor and a tail rotor was acknowledged in the test. The test was conducted using the Basic Model Test Rig and two scaled main rotor systems, one representing a 1/5.727 scale UH-60A BLACK HAWK and the others a 1/4.71 scale S-76. Eight alternate rotor tip configurations were tested, 3 on the BLACK HAWK rotor and 6 on the S-76 rotor. Four of these tips were then selected for testing in close proximity to an operating tail rotor (operating in both tractor and pusher modes) to determine if the performance advantages that could be obtained from the use of advanced geometry tips in a main rotor only environment would still exist in the more complex flow field involving a tail rotor. This volume contains the test run log and tabulated data.

Evaluation of comparative advantages in the profitability and competitiveness of the small-scale dairy system of Tulancingo Valley, Mexico.

PubMed

Posadas-Domínguez, Rodolfo Rogelio; Del Razo-Rodríguez, Oscar Enrique; Almaraz-Buendía, Isaac; Pelaez-Acero, Armando; Espinosa-Muñoz, Verónica; Rebollar-Rebollar, Samuel; Salinas-Martínez, Jesús Armando

2018-06-01

This article combines a Policy Analysis Matrix with a sensitivity and poverty line analysis with the objective of evaluating the economic contribution of comparative advantages to the private profitability and competitiveness of small-scale dairy systems. For 1 year, socioeconomic data were collected from 82 farms selected from four strata via statistical sampling. Two scenarios were established to determine the quantitative contribution of comparative advantages: (1) a simulated scenario, which accounted for the cost of purchasing the total food and the opportunity cost of the family labour force (FLF), and (2) an actual production scenario, which accounted for the cost of producing food and eliminating the payment of the FLF and included other income. The E3 and E4 producers were the most profitable and competitive in the simulated scenario and actual production scenario. Of the four scales evaluated, the E2 and E1 producers were the most efficient in taking advantage of the economic contribution provided by the comparative advantages in their own production of food and employment of the FLF, in addition to accounting for other income, a condition that increased their profitability by 171 and 144% and competitiveness by 346 and 273%, respectively. The poverty results indicated that only E3 and E4 producers were non-vulnerable in the simulated scenario and actual production scenario. The purchase of food was the comparative advantage with the greatest sensitivity to cost increases in the two scenarios analysed, which exacerbated the effect on the E1 and E2 producers.

Performance advantages of dynamically tuned gyroscopes in high accuracy spacecraft pointing and stabilization applications

NASA Technical Reports Server (NTRS)

Irvine, R.; Van Alstine, R.

1979-01-01

The paper compares and describes the advantages of dry tuned gyros over floated gyros for space applications. Attention is given to describing the Teledyne SDG-5 gyro and the second-generation NASA Standard Dry Rotor Inertial Reference Unit (DRIRU II). Certain tests which were conducted to evaluate the SDG-5 and DRIRU II for specific mission requirements are outlined, and their results are compared with published test results on other gyro types. Performance advantages are highlighted.

Home advantage in the Winter Paralympic Games 1976-2014.

PubMed

Wilson, Darryl; Ramchandani, Girish

2017-01-01

There is a limited amount of home advantage research concerned with winter sports. There is also a distinct lack of studies that investigate home advantage in the context of para sport events. This paper addresses this gap in the knowledge by examining home advantage in the Winter Paralympic Games. Using a standardised measure of success, we compared the performances of host nations at home with their own performances away from home between 1976 and 2014. Both country level and individual sport level analysis is conducted for this time period. Comparisons are also drawn with the Winter Olympic Games since 1992, the point from which both the Winter Olympic Games and the Winter Paralympic Games have been hosted by the same nations and in the same years. Clear evidence of a home advantage effect in the Winter Paralympic Games was found at country level. When examining individual sports, only alpine skiing and cross country skiing returned a significant home advantage effect. When comparing home advantage in the Winter Paralympic Games with the Winter Olympic Games for the last seven host nations (1992-2014), we found that home advantage was generally more pronounced (although not a statistically significant difference) in the case of the former. The causes of home advantage in the Winter Paralympic Games are unclear and should be investigated further.

A microbial model of economic trading and comparative advantage.

PubMed

Enyeart, Peter J; Simpson, Zachary B; Ellington, Andrew D

2015-01-07

The economic theory of comparative advantage postulates that beneficial trading relationships can be arrived at by two self-interested entities producing the same goods as long as they have opposing relative efficiencies in producing those goods. The theory predicts that upon entering trade, in order to maximize consumption both entities will specialize in producing the good they can produce at higher efficiency, that the weaker entity will specialize more completely than the stronger entity, and that both will be able to consume more goods as a result of trade than either would be able to alone. We extend this theory to the realm of unicellular organisms by developing mathematical models of genetic circuits that allow trading of a common good (specifically, signaling molecules) required for growth in bacteria in order to demonstrate comparative advantage interactions. In Conception 1, the experimenter controls production rates via exogenous inducers, allowing exploration of the parameter space of specialization. In Conception 2, the circuits self-regulate via feedback mechanisms. Our models indicate that these genetic circuits can demonstrate comparative advantage, and that cooperation in such a manner is particularly favored under stringent external conditions and when the cost of production is not overly high. Further work could involve implementing the models in living bacteria and searching for naturally occurring cooperative relationships between bacteria that conform to the principles of comparative advantage. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

LIBS: a potential tool for industrial/agricultural waste water analysis

NASA Astrophysics Data System (ADS)

Karpate, Tanvi; K. M., Muhammed Shameem; Nayak, Rajesh; V. K., Unnikrishnan; Santhosh, C.

2016-04-01

Laser Induced Breakdown Spectroscopy (LIBS) is a multi-elemental analysis technique with various advantages and has the ability to detect any element in real time. This technique holds a potential for environmental monitoring and various such analysis has been done in soil, glass, paint, water, plastic etc confirms the robustness of this technique for such applications. Compared to the currently available water quality monitoring methods and techniques, LIBS has several advantages, viz. no need for sample preparation, fast and easy operation, and chemical free during the process. In LIBS, powerful pulsed laser generates plasma which is then analyzed to get quantitative and qualitative details of the elements present in the sample. Another main advantage of LIBS technique is that it can perform in standoff mode for real time analysis. Water samples from industries and agricultural strata tend to have a lot of pollutants making it harmful for consumption. The emphasis of this project is to determine such harmful pollutants present in trace amounts in industrial and agricultural wastewater. When high intensity laser is made incident on the sample, a plasma is generated which gives a multielemental emission spectra. LIBS analysis has shown outstanding success for solids samples. For liquid samples, the analysis is challenging as the liquid sample has the chances of splashing due to the high energy of laser and thus making it difficult to generate plasma. This project also deals with determining the most efficient method for testing of water sample for qualitative as well as quantitative analysis using LIBS.

Synthesis of 1D-glyconanomaterials by a hybrid noncovalent-covalent functionalization of single wall carbon nanotubes: a study of their selective interactions with lectins and with live cells.

PubMed

Pernía Leal, M; Assali, M; Cid, J J; Valdivia, V; Franco, J M; Fernández, I; Pozo, D; Khiar, N

2015-12-07

To take full advantage of the remarkable applications of carbon nanotubes in different fields, there is a need to develop effective methods to improve their water dispersion and biocompatibility while maintaining their physical properties. In this sense, current approaches suffer from serious drawbacks such as loss of electronic structure together with low surface coverage in the case of covalent functionalizations, or instability of the dynamic hybrids obtained by non-covalent functionalizations. In the present work, we examined the molecular basis of an original strategy that combines the advantages of both functionalizations without their main drawbacks. The hierarchical self-assembly of diacetylenic-based neoglycolipids into highly organized and compacted rings around the nanotubes, followed by photopolymerization leads to the formation of nanotubes covered with glyconanorings with a shish kebab-type topology exposing the carbohydrate ligands to the water phase in a multivalent fashion. The glyconanotubes obtained are fully functional, and able to establish specific interactions with their cognate receptors. In fact, by taking advantage of this selective binding, an easy method to sense lectins as a working model of toxin detection was developed based on a simple analysis of TEM images. Remarkably, different experimental settings to assess cell membrane integrity, cell growth kinetics and cell cycle demonstrated the cellular biocompatibility of the sugar-coated carbon nanotubes compared to pristine single-walled carbon nanotubes.

Hand effects on mentally simulated reaching.

PubMed

Gabbard, Carl; Ammar, Diala; Rodrigues, Luis

2005-08-01

Within the area of simulated (imagined) versus actual movement research, investigators have discovered that mentally simulated movements, like real actions, are controlled primarily by the hemispheres contralateral to the simulated limb. Furthermore, evidence points to a left-brain advantage for accuracy of simulated movements. With this information it could be suggested that, compared to left-handers, most right-handers would have an advantage. To test this hypothesis, strong right- and left-handers were compared on judgments of perceived reachability to visual targets lasting 150 ms in multiple locations of midline, right- and left-visual field (RVF/LVF). In reference to within group responses, we found no hemispheric or hand use advantage for right-handers. Although left-handers revealed no hemispheric advantage, there was a significant hand effect, favoring the non-dominant limb, most notably in LVF. This finding is explained in regard to a possible interference effect for left-handers, not shown for right-handers. Overall, left-handers displayed significantly more errors across hemispace. Therefore, it appears that when comparing hand groups, a left-hemisphere advantage favoring right-handers is plausible.

Three dimensional socket preservation: a technique for soft tissue augmentation along with socket grafting

PubMed Central

2012-01-01

Background A cursory review of the current socket preservation literatures well depicts the necessity of further esthetic considerations through the corrective procedures of the alveolar ridge upon and post extraction. A new technique has been described here is a rotational pedicle combined epithelialized and connective tissue graft (RPC graft) adjunct with immediate guided tissue regeneration (GBR) procedure. Results We reviewed this technique through a case report and discuss it’s benefit in compare to other socket preservation procedures. Conclusion The main advantages of RPC graft would be summarized as follows: stable primary closure during bone remodeling, saving or crating sufficient vestibular depth, making adequate keratinized gingiva on the buccal surface, and being esthetically pleasant. PMID:22540920

Dimensioning appropriate technical and economic parameters of elements in urban distribution power nets based on discrete fast marching method

NASA Astrophysics Data System (ADS)

Afanasyev, A. P.; Bazhenov, R. I.; Luchaninov, D. V.

2018-05-01

The main purpose of the research is to develop techniques for defining the best technical and economic trajectories of cables in urban power systems. The proposed algorithms of calculation of the routes for laying cables take into consideration topological, technical and economic features of the cabling. The discrete option of an algorithm Fast marching method is applied as a calculating tool. It has certain advantages compared to other approaches. In particular, this algorithm is cost-effective to compute, therefore, it is not iterative. Trajectories of received laying cables are considered as optimal ones from the point of view of technical and economic criteria. They correspond to the present rules of modern urban development.

Comparison of reversible methods for data compression

NASA Astrophysics Data System (ADS)

Heer, Volker K.; Reinfelder, Hans-Erich

1990-07-01

Widely differing methods for data compression described in the ACR-NEMA draft are used in medical imaging. In our contribution we will review various methods briefly and discuss the relevant advantages and disadvantages. In detail we evaluate 1st order DPCM pyramid transformation and S transformation. We compare as coding algorithms both fixed and adaptive Huffman coding and Lempel-Ziv coding. Our comparison is performed on typical medical images from CT MR DSA and DLR (Digital Luminescence Radiography). Apart from the achieved compression factors we take into account CPU time required and main memory requirement both for compression and for decompression. For a realistic comparison we have implemented the mentioned algorithms in the C program language on a MicroVAX II and a SPARC station 1. 2.

Spectrum sensing algorithm based on autocorrelation energy in cognitive radio networks

NASA Astrophysics Data System (ADS)

Ren, Shengwei; Zhang, Li; Zhang, Shibing

2016-10-01

Cognitive radio networks have wide applications in the smart home, personal communications and other wireless communication. Spectrum sensing is the main challenge in cognitive radios. This paper proposes a new spectrum sensing algorithm which is based on the autocorrelation energy of signal received. By taking the autocorrelation energy of the received signal as the statistics of spectrum sensing, the effect of the channel noise on the detection performance is reduced. Simulation results show that the algorithm is effective and performs well in low signal-to-noise ratio. Compared with the maximum generalized eigenvalue detection (MGED) algorithm, function of covariance matrix based detection (FMD) algorithm and autocorrelation-based detection (AD) algorithm, the proposed algorithm has 2 11 dB advantage.

Application of General Regression Neural Network to the Prediction of LOD Change

NASA Astrophysics Data System (ADS)

Zhang, Xiao-Hong; Wang, Qi-Jie; Zhu, Jian-Jun; Zhang, Hao

2012-01-01

Traditional methods for predicting the change in length of day (LOD change) are mainly based on some linear models, such as the least square model and autoregression model, etc. However, the LOD change comprises complicated non-linear factors and the prediction effect of the linear models is always not so ideal. Thus, a kind of non-linear neural network — general regression neural network (GRNN) model is tried to make the prediction of the LOD change and the result is compared with the predicted results obtained by taking advantage of the BP (back propagation) neural network model and other models. The comparison result shows that the application of the GRNN to the prediction of the LOD change is highly effective and feasible.

Characterization of Graphene Stripper Foils in 11-MeV Cyclotrons

NASA Astrophysics Data System (ADS)

Korenev, Sergey; Dishman, Rick; Yebra, Alberto; Meshcheryakov, Nikolay; Smirnov, Ilya; Pavlovsky, Igor; Fink, Richard

An experimental study of the use of graphene as an extractor (stripper) foil in the 11-MeV Siemens Eclipse Cyclotron is discussed in this paper. The main advantage of graphene is its high thermal conductivity compared to that of amorphous carbon films. Graphene also has significant mechanical strength. The lifetime of the graphene foils under proton bombardment exceeded 16,000 μAh. Graphene-based stripper foils demonstrated a significant increase in the transmission factor (defined as the ratio of the beam current on the target to the beam current on the stripper foil), which was approximately 90%. Fabrication of the graphene-based foils is discussed. The pros and cons of using the graphene material as a stripper foil in cyclotrons are analyzed.

Similarity of Mars and Mercury for terraforming and settling of people

NASA Astrophysics Data System (ADS)

Steklov, A. F.; Vidmachenko, A. P.

2018-05-01

We compared the main characteristics of the planets Mars and Mercury in the form normalized on the parameters of the planet Earth. Both planets turned out to be similar and close in terms of terraforming techniques, and conditions of comfortable human habitation in long term endo-planetary stations under the surface of a particular planetoid. Mars and Mercury also turned out to be similar on the vital activity of some other representatives of the Earth's biosphere. Our detailed analysis of the temperature distribution both over the entire surface of these planets, and in the conditions of their diurnal and annual variations on different latitudes and on Mars and on Mercury - showed that each of these planets has its advantages for the first terraforming.

Determination of the optimal conditions for inclination maneuvers using a Swing-by

NASA Astrophysics Data System (ADS)

Moura, O.; Celestino, C. C.; Prado, A. F. B. A.

2018-05-01

The search for methods to reduce the fuel consumption in orbital transfers is something relevant and always current in astrodynamics. Therefore, the maneuvers assisted by the gravity, also called Swing-by maneuvers, can be an advantageous option to save fuel. The proposal of the present research is to explore the influence of some parameters in a Swing-by of an artificial satellite orbiting a planet with one of the moons of this mother planet, with the goal of changing the inclination of the artificial satellite around the main body of the system. The fuel consumption of this maneuver is compared with the required consumption to perform the same change of inclination using the classical approach of impulsive maneuvers.

Attrition-free pyrolysis to produce bio-oil and char.

PubMed

Mauviel, Guillain; Guillain, Mauviel; Kies, Fairouz; Fairouz, Kies; René, Mar Sans; Mar, Sans Rene; Ferrer, Monique; Monique, Ferrer; Lédé, Jacques; Jacques, Lédé

2009-12-01

Experiments are performed on a laboratory scale setup where beech wood chips are heated by gas convection and walls radiation. This study shows that it is possible to obtain high bio-oil and char yields with relatively low external heat transfer coefficients. The main advantage of this convection/radiation heat transfer mode compared to solid-solid collisions, applied in fluidized bed or twin screw reactors, is the reduction of solid attrition (char and sand). Thus tricky gas-solid separation through hot cyclones and/or hot filters could be avoided or reduced. It should be possible to recover directly bio-oil with less char particles and char free of sand dust. These qualities would allow easier use of these bio-products in different applications.

High-dose-rate prostate brachytherapy inverse planning on dose-volume criteria by simulated annealing.

PubMed

Deist, T M; Gorissen, B L

2016-02-07

High-dose-rate brachytherapy is a tumor treatment method where a highly radioactive source is brought in close proximity to the tumor. In this paper we develop a simulated annealing algorithm to optimize the dwell times at preselected dwell positions to maximize tumor coverage under dose-volume constraints on the organs at risk. Compared to existing algorithms, our algorithm has advantages in terms of speed and objective value and does not require an expensive general purpose solver. Its success mainly depends on exploiting the efficiency of matrix multiplication and a careful selection of the neighboring states. In this paper we outline its details and make an in-depth comparison with existing methods using real patient data.

Integration Issues of Cells into Battery Packs for Plug-in and Hybrid Electric Vehicles: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pesaran, A. A.; Kim, G. H.; Keyser, M.

2009-05-01

The main barriers to increased market share of hybrid electric vehicles (HEVs) and commercialization of plug-in HEVs are the cost, safety, and life of lithium ion batteries. Significant effort is being directed to address these issues for lithium ion cells. However, even the best cells may not perform as well when integrated into packs for vehicles because of the environment in which vehicles operate. This paper discusses mechanical, electrical, and thermal integration issues and vehicle interface issues that could impact the cost, life, and safety of the system. It also compares the advantages and disadvantages of using many small cellsmore » versus a few large cells and using prismatic cells versus cylindrical cells.« less

A new experiment to investigate the origin of optical activity using a low energy positron beam of controlled helicity. [molecular biology

NASA Technical Reports Server (NTRS)

Gidley, D. W.; Rich, A.; Van House, J. C.; Zitzewitz, P. W.

1981-01-01

Previous experiments undertaken in search of a correlation between the origin of optical activity in biological molecules and the helicity of beta particles emitted in nuclear beta decay have not provided any useful results. A description is presented of an experiment in which a low energy polarized positron beam of controlled helicity interacts with an optically active material to form positronium in vacuum. Advantages of the current study compared to the previous experiments are mainly related to a much greater sensitivity. Initially, it will be possible to detect a helicity-dependent asymmetry in triplet positronium formation of 1 part in 10,000. Improvements to better than 1 part in 100,000 should be attainable.

A Novel Interactive Exoskeletal Robot for Overground Locomotion Studies in Rats.

PubMed

Song, Yun Seong; Hogan, Neville

2015-07-01

This paper introduces a newly developed apparatus, Iron Rat, for locomotion research in rodents. Its main purpose is to allow maximal freedom of voluntary overground movement of the animal while providing forceful interaction to the hindlimbs. Advantages and challenges of the proposed exoskeletal apparatus over other existing designs are discussed. Design and implementation challenges are presented and discussed, emphasizing their implications for free, voluntary movement of the animal. A live-animal experiment was conducted to assess the design. Unconstrained natural movement of the animal was compared with its movement with the exoskeletal module attached. The compact design and back-drivable implementation of this apparatus will allow novel experimental manipulations that may include forceful yet compliant dynamic interaction with the animal's overground locomotion.

A new ultrasonic transducer for improved contrast nonlinear imaging

NASA Astrophysics Data System (ADS)

Bouakaz, Ayache; ten Cate, Folkert; de Jong, Nico

2004-08-01

Second harmonic imaging has provided significant improvement in contrast detection over fundamental imaging. This improvement is a result of a higher contrast-to-tissue ratio (CTR) achievable at the second harmonic frequency. Nevertheless, the differentiation between contrast and tissue at the second harmonic frequency is still in many situations cumbersome and contrast detection remains nowadays as one of the main challenges, especially in the capillaries. The reduced CTR is mainly caused by the generation of second harmonic energy from nonlinear propagation effects in tissue, which hence obscures the echoes from contrast bubbles. In a previous study, we demonstrated theoretically that the CTR increases with the harmonic number. Therefore the purpose of our study was to increase the CTR by selectively looking to the higher harmonic frequencies. In order to be able to receive these high frequency components (third up to the fifth harmonic), a new ultrasonic phased array transducer has been constructed. The main advantage of the new design is its wide frequency bandwidth. The new array transducer contains two different types of elements arranged in an interleaved pattern (odd and even elements). This design enables separate transmission and reception modes. The odd elements operate at 2.8 MHz and 80% bandwidth, whereas the even elements have a centre frequency of 900 kHz with a bandwidth of 50%. The probe is connected to a Vivid 5 system (GE-Vingmed) and proper software is developed for driving. The total bandwidth of such a transducer is estimated to be more than 150% which enables higher harmonic imaging at an adequate sensitivity and signal to noise ratio compared to standard medical array transducers. We describe in this paper the design and fabrication of the array transducer. Moreover its acoustic properties are measured and its performances for nonlinear contrast imaging are evaluated in vitro and in vivo. The preliminary results demonstrate the advantages of such a transducer design for improved contrast detection.

Shaft seals with an easily removable cylinder holder for low-pressure steam turbines

NASA Astrophysics Data System (ADS)

Zakharov, A. E.; Rodionov, D. A.; Pimenov, E. V.; Sobolev, A. S.

2016-01-01

The article is devoted to the problems that occur at the operation of LPC shaft seals (SS) of turbines, particularly, their bearings. The problems arising from the deterioration of oil-protecting rings of SS and bearings and also the consequences in which they can result are considered. The existing SS housing construction types are considered. Their operational features are specified. A new SS construction type with an easily removable holder is presented. The construction of its main elements is described. The sequence of operations of the repair personnel at the restoration of the new SS type spacings is proposed. The comparative analysis of the new and the existing SS construction types is carried out. The assessment results of the efficiency, the operational convenience, and the economic effect after the installation of the new type seals are given. The conclusions about the offered construction prospects are made by results of the comparative analysis and the carried-out assessment. The main advantage of this design is the possibility of spacings restoration both in SS and in oil-protecting rings during a short-term stop of a turbine, even without its cooling. This construction was successfully tested on the working K-300-23.5 LMP turbine. However, its adaptation for other turbines is quite possible.

A novel multi-model neuro-fuzzy-based MPPT for three-phase grid-connected photovoltaic system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chaouachi, Aymen; Kamel, Rashad M.; Nagasaka, Ken

This paper presents a novel methodology for Maximum Power Point Tracking (MPPT) of a grid-connected 20 kW photovoltaic (PV) system using neuro-fuzzy network. The proposed method predicts the reference PV voltage guarantying optimal power transfer between the PV generator and the main utility grid. The neuro-fuzzy network is composed of a fuzzy rule-based classifier and three multi-layered feed forwarded Artificial Neural Networks (ANN). Inputs of the network (irradiance and temperature) are classified before they are fed into the appropriated ANN for either training or estimation process while the output is the reference voltage. The main advantage of the proposed methodology,more » comparing to a conventional single neural network-based approach, is the distinct generalization ability regarding to the nonlinear and dynamic behavior of a PV generator. In fact, the neuro-fuzzy network is a neural network based multi-model machine learning that defines a set of local models emulating the complex and nonlinear behavior of a PV generator under a wide range of operating conditions. Simulation results under several rapid irradiance variations proved that the proposed MPPT method fulfilled the highest efficiency comparing to a conventional single neural network and the Perturb and Observe (P and O) algorithm dispositive. (author)« less

An Experiment in Comparative Advantage.

ERIC Educational Resources Information Center

Haupert, Michael J.

1996-01-01

Describes an undergraduate economics course experiment designed to teach the concepts of comparative advantage and opportunity costs. Students have a limited number of labor hours and can chose to produce either wheat or steel. As the project progresses, the students trade commodities in an attempt to maximize use of their labor hours. (MJP)

Use of piezoelectric multicomponent force measuring devices in fluid mechanics

NASA Technical Reports Server (NTRS)

Richter, A.; Stefan, K.

1979-01-01

The characterisitics of piezoelectric multicomponent transducers are discussed, giving attention to the advantages of quartz over other materials. The main advantage of piezoelectric devices in aerodynamic studies is their ability to indicate rapid changes in the values of physical parameters. Problems in the accuracy of measurments by piezoelectric devices can be overcome by suitable design approaches. A practical example is given of how such can be utilized to measure rapid fluctuations of fluid forces exerted on a circular cylinder mounted in a water channel.

Introduction to the problem

NASA Technical Reports Server (NTRS)

Ramohalli, Kumar

1989-01-01

Solid propellant rockets were used extensively in space missions ranging from large boosters to orbit-raising upper stages. The smaller motors find exclusive use in various earth-based applications. The advantage of the solids include simplicity, readiness, volumetric efficiency, and storability. Important recent progress in related fields (combustion, rheology, micro-instrumentation/diagnostics, and chaos theory) can be applied to solid rockets to derive maximum advantage and avoid waste. Main objectives of research in solid propellants include: to identify critical parameters, to establish specification rules, and to develop quantitative criteria.

Flow Control Technology

DTIC Science & Technology

2010-07-01

known as Darrieus turbines or, after the German inventors of these devices, Voith-Schneider propellers. Their main advantage is the ability to produce... turbines (VAWT), named for the typical orientation of the main shaft. While their efficiency is similar to that of the more common horizontal axis wind ...Oscillating Systems’, Cambridge University Press, 2002 [11] G. M. Darrieus , ’ Turbine having its rotating shaft transverse to the flow of the current

Research on the Application of GRC Material in Exhibition Decoration Engineering

NASA Astrophysics Data System (ADS)

Cai, Yan

2018-03-01

Glass fiber reinforced cement (GRC) is a kind of new building material which is based on cement and take the alkali resistant glass fiber as reinforcing material. It is mainly used in building decoration project and it has many advantages like environmental protection, economical, practical modeling and others. This paper mainly studies the concrete application of GRC material in exhibition building decoration project.

LMFBR with booster pump in pumping loop

DOEpatents

Rubinstein, H.J.

1975-10-14

A loop coolant circulation system is described for a liquid metal fast breeder reactor (LMFBR) utilizing a low head, high specific speed booster pump in the hot leg of the coolant loop with the main pump located in the cold leg of the loop, thereby providing the advantages of operating the main pump in the hot leg with the reliability of cold leg pump operation.

Economic Security Environment and Implementation of Planning, Programming, Budgeting, Execution (PPBE) System in Georgia

DTIC Science & Technology

2004-06-01

11 Table 2. Main Macroeconomic Indicators of the State Budget (From: Ref. 21) ...........13 Table 3. State Budget Expenditures...programs with alternative options and Budget Estimations - called Planning, Programming and Budget System (PPBS). The principles and main idea of Defense...about the political fundamentals of building the state, market economy principles , and the advantages of globalization. Georgia was among the first

Cost aware cache replacement policy in shared last-level cache for hybrid memory based fog computing

NASA Astrophysics Data System (ADS)

Jia, Gangyong; Han, Guangjie; Wang, Hao; Wang, Feng

2018-04-01

Fog computing requires a large main memory capacity to decrease latency and increase the Quality of Service (QoS). However, dynamic random access memory (DRAM), the commonly used random access memory, cannot be included into a fog computing system due to its high consumption of power. In recent years, non-volatile memories (NVM) such as Phase-Change Memory (PCM) and Spin-transfer torque RAM (STT-RAM) with their low power consumption have emerged to replace DRAM. Moreover, the currently proposed hybrid main memory, consisting of both DRAM and NVM, have shown promising advantages in terms of scalability and power consumption. However, the drawbacks of NVM, such as long read/write latency give rise to potential problems leading to asymmetric cache misses in the hybrid main memory. Current last level cache (LLC) policies are based on the unified miss cost, and result in poor performance in LLC and add to the cost of using NVM. In order to minimize the cache miss cost in the hybrid main memory, we propose a cost aware cache replacement policy (CACRP) that reduces the number of cache misses from NVM and improves the cache performance for a hybrid memory system. Experimental results show that our CACRP behaves better in LLC performance, improving performance up to 43.6% (15.5% on average) compared to LRU.

Inclusion of Gaming Disorder in ICD has more advantages than disadvantages

PubMed Central

Király, Orsolya; Demetrovics, Zsolt

2017-01-01

This paper is a response to a recent debate paper in which Aarseth et al. argue that the inclusion of a formal diagnosis and categories for problematic video gaming or Gaming Disorder (GD) in the World Health Organization’s 11th Revision of the International Classification of Diseases (ICD-11) is premature and therefore the proposal should be removed. The present authors systematically address all the six main arguments presented by Aarseth et al. and argue that, even though some of the concerns presented in the debate paper are legitimate, the inclusion of GD in ICD-11 has more advantages than disadvantages. Furthermore, the present authors also argue that the two GD subtypes (“GD, predominantly online” and “GD, predominantly offline”) are unnecessary and rather problematic; the main category for GD would be perfectly sufficient. PMID:28816495

Solvothermal Synthesis of Magnetic Spinel Ferrites

PubMed Central

Rafienia, Mohammad; Bigham, Ashkan; Hassanzadeh-Tabrizi, Seyed Ali

2018-01-01

At present, solvothermal fabrication method has widely been applied in the synthesis of spinel ferrite nanoparticles (SFNs), which is mainly because of its great advantages such as precise control over size, shape distribution, and high crystallinity that do not require postannealing treatment. Among various SFNs, Fe3O4 nanoparticles have attracted tremendous attention because of their favorable physical and structural properties which are advantageous, especially in biomedical applications, among which the vast application of these materials as targeted drug delivery systems, hyperthermia, and imaging agents in cancer therapy can be mentioned. The main focus of this study is to present an introduction to solvothermal method and key synthesis parameters of SFNs through this synthesis route. Moreover, most recent progress on the potential applications of Fe3O4 nanoparticles as the most important compound among the spinel ferrites family members is discussed. PMID:29928636

Inclusion of Gaming Disorder in ICD has more advantages than disadvantages.

PubMed

Király, Orsolya; Demetrovics, Zsolt

2017-09-01

This paper is a response to a recent debate paper in which Aarseth et al. argue that the inclusion of a formal diagnosis and categories for problematic video gaming or Gaming Disorder (GD) in the World Health Organization's 11th Revision of the International Classification of Diseases (ICD-11) is premature and therefore the proposal should be removed. The present authors systematically address all the six main arguments presented by Aarseth et al. and argue that, even though some of the concerns presented in the debate paper are legitimate, the inclusion of GD in ICD-11 has more advantages than disadvantages. Furthermore, the present authors also argue that the two GD subtypes ("GD, predominantly online" and "GD, predominantly offline") are unnecessary and rather problematic; the main category for GD would be perfectly sufficient.

Comparison of Three Real-Time Measurement Methods for Airborne Ultrafine Particles in the Silicon Alloy Industry.

PubMed

Kero, Ida Teresia; Jørgensen, Rikke Bramming

2016-09-01

The aim of this study was to compare the applicability and the correlation between three commercially available instruments capable of detection, quantification, and characterization of ultrafine airborne particulate matter in the industrial setting of a tapping area in a silicon alloy production plant. The number concentration of ultrafine particles was evaluated using an Electric Low Pressure Impactor (ELPI(TM)), a Fast Mobility Particle Sizer (FMPS(TM)), and a Condensation Particle Counter (CPC). The results are discussed in terms of particle size distribution and temporal variations linked to process operations. The instruments show excellent temporal covariation and the correlation between the FMPS and ELPI is good. The advantage of the FMPS is the excellent time- and size resolution of the results. The main advantage of the ELPI is the possibility to collect size-fractionated samples of the dust for subsequent analysis by, for example, electron microscopy. The CPC does not provide information about the particle size distribution and its correlation to the other two instruments is somewhat poor. Nonetheless, the CPC gives basic, real-time information about the ultrafine particle concentration and can therefore be used for source identification.

In situ Raman mapping of art objects

PubMed Central

Brondeel, Ph.; Moens, L.; Vandenabeele, P.

2016-01-01

Raman spectroscopy has grown to be one of the techniques of interest for the investigation of art objects. The approach has several advantageous properties, and the non-destructive character of the technique allowed it to be used for in situ investigations. However, compared with laboratory approaches, it would be useful to take advantage of the small spectral footprint of the technique, and use Raman spectroscopy to study the spatial distribution of different compounds. In this work, an in situ Raman mapping system is developed to be able to relate chemical information with its spatial distribution. Challenges for the development are discussed, including the need for stable positioning and proper data treatment. To avoid focusing problems, nineteenth century porcelain cards are used to test the system. This work focuses mainly on the post-processing of the large dataset which consists of four steps: (i) importing the data into the software; (ii) visualization of the dataset; (iii) extraction of the variables; and (iv) creation of a Raman image. It is shown that despite the challenging task of the development of the full in situ Raman mapping system, the first steps are very promising. This article is part of the themed issue ‘Raman spectroscopy in art and archaeology’. PMID:27799424

A study to evaluate STS heads-up ascent trajectory performance employing a minimum-Hamiltonian optimization strategy

NASA Technical Reports Server (NTRS)

Sinha, Sujit

1988-01-01

A study was conducted to evaluate the performance implications of a heads-up ascent flight design for the Space Transportation System, as compared to the current heads-down flight mode. The procedure involved the use of the Minimum Hamiltonian Ascent Shuttle Trajectory Evaluation Program, which is a three-degree-of-freedom moment balance simulation of shuttle ascent. A minimum-Hamiltonian optimization strategy was employed to maximize injection weight as a function of maximum dynamic pressure constraint and Solid Rocket Motor burnrate. Performance Reference Mission Four trajectory groundrules were used for consistency. The major conclusions are that for heads-up ascent and a mission nominal design maximum dynamic pressure value of 680 psf, the optimum solid motor burnrate is 0.394 ips, which produces a performance enhancement of 4293 lbm relative to the baseline heads-down ascent, with 0.368 ips burnrate solid motors and a 680 psf dynamic pressure constraint. However, no performance advantage exists for heads-up flight if the current Solid Rocket Motor target burnrate of 0.368 ips is used. The advantage of heads-up ascent flight employing the current burnrate is that Space Shuttle Main Engine throttling for dynamic pressure control is not necessary.

Particle based vaccine formulations for transcutaneous immunization.

PubMed

Mittal, Ankit; Raber, Anne S; Lehr, Claus-Michael; Hansen, Steffi

2013-09-01

Vaccine formulations on the basis of nano- (NP) or microparticles (MP) can solve issues with stabilization, controlled release, and poor immunogenicity of antigens. Likewise transcutaneous immunization (TCI) promises superior immunogenicity as well as the advantages of needle-free application compared with conventional intramuscular injections. Thus the combination of both strategies seems to be a very valuable approach. However, until now TCI using particle based vaccine formulations has made no impact on medical practice. One of the main difficulties is that NPs and MPs cannot penetrate the skin to an extent that would allow the application of the required dose of antigen. This is due to the formidable stratum corneum (SC) barrier, the limited amount of antigen in the formulation and often an insufficient immunogenicity. A multitude of strategies are currently under investigation to overcome these issues. We highlight selected methods presenting a spectrum of solutions ranging from transfollicular delivery, to devices disrupting the SC barrier and the combination of particle based vaccines with adjuvants discussing their advantages and shortcomings. Some of these are currently at an experimental state while others are already in clinical testing. All methods have been shown to be capable of transcutaneous antigen delivery.

An optimal design of coreless direct-drive axial flux permanent magnet generator for wind turbine

NASA Astrophysics Data System (ADS)

Ahmed, D.; Ahmad, A.

2013-06-01

Different types of generators are currently being used in wind power technology. The commonly used are induction generator (IG), doubly-fed induction generator (DFIG), electrically excited synchronous generator (EESG) and permanent magnet synchronous generator (PMSG). However, the use of PMSG is rapidly increasing because of advantages such as higher power density, better controllability and higher reliability. This paper presents an innovative design of a low-speed modular, direct-drive axial flux permanent magnet (AFPM) generator with coreless stator and rotor for a wind turbine power generation system that is developed using mathematical and analytical methods. This innovative design is implemented in MATLAB / Simulink environment using dynamic modelling techniques. The main focus of this research is to improve efficiency of the wind power generation system by investigating electromagnetic and structural features of AFPM generator during its operation in wind turbine. The design is validated by comparing its performance with standard models of existing wind power generators. The comparison results demonstrate that the proposed model for the wind power generator exhibits number of advantages such as improved efficiency with variable speed operation, higher energy yield, lighter weight and better wind power utilization.

Sugammadex: Appropriate Use in the Context of Budgetary Constraints.

PubMed

Cammu, Guy

2018-01-01

The purpose of this review is to assess how sugammadex impacts postoperative residual curarization using appropriate doses based on neuromuscular transmission monitoring and whether the advantages of sugammadex versus neostigmine outweigh its higher cost. An accurate assessment of neuromuscular blockade with monitoring is necessary before selecting neostigmine versus sugammadex for reversal at the end of surgery to overcome incomplete neuromuscular recovery. The main advantages of sugammadex over neostigmine are its predictability and its ability to extend the range of blockade reversal. The cost of sugammadex is greater when higher doses of sugammadex are required for antagonism of deep block. Sugammadex probably has the potential to be cost-effective compared with neostigmine if its time savings are put to productive use in clinical practice. However, to date, the economic benefits of the drug are unknown. With sugammadex, almost any degree of neuromuscular block can be antagonized within 2-3 min; neostigmine is the only reversal agent effective against benzylisoquinolines and can ideally be used for reversal of lower levels of residual paralysis. The performance of the more expensive sugammadex on improving patient outcomes may depend on several elements of clinical strategy.

Precision tethered satellite attitude control. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Kline-Schoder, Robert J.

1990-01-01

Tethered spacecraft possess unique dynamic characteristics which make them advantageous for certain classes of experiments. One use for which tethers are particularly well suited is to provide an isolated platform for spaceborne observatories. The advantages of tethering a pointing platform 1 or 2 km from a space shuttle or space station are that, compared to placing the observatory on the parent spacecraft, vibrational disturbances are attenuated and contamination is eliminated. In practice, all satellites have some requirement on the attitude control of the spacecraft, and tethered satellites are no exception. It has previously been shown that conventional means of performing attitude control for tethered satellites are insufficient for any mission with pointing requirements more stringent than about 1 deg. This is due mainly to the relatively large force applied by the tether to the spacecraft. A particularly effective method of implementing attitude control for tethered satellites is to use this tether tension force to generate control torques by moving the tether attach point relative to the subsatellite center of mass. A demonstration of this attitude control technique on an astrophysical pointing platform has been proposed for a space shuttle flight test project and is referred to as the Kinetic Isolation Tether Experiment (KITE).

Comparison of Three Real-Time Measurement Methods for Airborne Ultrafine Particles in the Silicon Alloy Industry

PubMed Central

Kero, Ida Teresia; Jørgensen, Rikke Bramming

2016-01-01

The aim of this study was to compare the applicability and the correlation between three commercially available instruments capable of detection, quantification, and characterization of ultrafine airborne particulate matter in the industrial setting of a tapping area in a silicon alloy production plant. The number concentration of ultrafine particles was evaluated using an Electric Low Pressure Impactor (ELPITM), a Fast Mobility Particle Sizer (FMPSTM), and a Condensation Particle Counter (CPC). The results are discussed in terms of particle size distribution and temporal variations linked to process operations. The instruments show excellent temporal covariation and the correlation between the FMPS and ELPI is good. The advantage of the FMPS is the excellent time- and size resolution of the results. The main advantage of the ELPI is the possibility to collect size-fractionated samples of the dust for subsequent analysis by, for example, electron microscopy. The CPC does not provide information about the particle size distribution and its correlation to the other two instruments is somewhat poor. Nonetheless, the CPC gives basic, real-time information about the ultrafine particle concentration and can therefore be used for source identification. PMID:27598180

Comparison of Yeasts as Hosts for Recombinant Protein Production.

PubMed

Vieira Gomes, Antonio Milton; Souza Carmo, Talita; Silva Carvalho, Lucas; Mendonça Bahia, Frederico; Parachin, Nádia Skorupa

2018-04-29

Recombinant protein production emerged in the early 1980s with the development of genetic engineering tools, which represented a compelling alternative to protein extraction from natural sources. Over the years, a high level of heterologous protein was made possible in a variety of hosts ranging from the bacteria Escherichia coli to mammalian cells. Recombinant protein importance is represented by its market size, which reached $1654 million in 2016 and is expected to reach $2850.5 million by 2022. Among the available hosts, yeasts have been used for producing a great variety of proteins applied to chemicals, fuels, food, and pharmaceuticals, being one of the most used hosts for recombinant production nowadays. Historically, Saccharomyces cerevisiae was the dominant yeast host for heterologous protein production. Lately, other yeasts such as Komagataella sp., Kluyveromyces lactis , and Yarrowia lipolytica have emerged as advantageous hosts. In this review, a comparative analysis is done listing the advantages and disadvantages of using each host regarding the availability of genetic tools, strategies for cultivation in bioreactors, and the main techniques utilized for protein purification. Finally, examples of each host will be discussed regarding the total amount of protein recovered and its bioactivity due to correct folding and glycosylation patterns.

Is There an Islamist Political Advantage?

PubMed Central

Cammett, Melani; Luong, Pauline Jones

2014-01-01

There is a widespread presumption that Islamists have an advantage over their opponents when it comes to generating mass appeal and winning elections. The question remains, however, as to whether these advantages—or, what we refer to collectively as an Islamist political advantage—actually exist. We argue that—to the extent that Islamists have a political advantage—the primary source of this advantage is reputation rather than the provision of social services, organizational capacity, or ideological hegemony. Our purpose is not to dismiss the main sources of the Islamist governance advantage identified in scholarly literature and media accounts, but to suggest a different causal path whereby each of these factors individually and sometimes jointly promotes a reputation for Islamists as competent, trustworthy, and pure. It is this reputation for good governance that enables Islamists to distinguish themselves in the streets and at the ballot box. PMID:25767370

The relationship among the resiliency practices in supply chain, financial performance, and competitive advantage in manufacturing firms in Indonesia and Sierra Leone

NASA Astrophysics Data System (ADS)

Musa, I.; Nyoman Pujawan, I.

2018-04-01

Current supply chain management (SCM) has become a potentially treasured way of safeguarding competitive advantage and improving organizational performance since competition is no longer between organizations, but among supply chains. This research conceptualizes and develops four resiliency practices (Flexibility, Redundancy, Collaboration and Agility) and tests the relationships between organizations’ financial performance and competitive advantage in manufacturing firms. The study involves manufacturing firms in Indonesia and Sierra Leone. The study used stratified random sampling to pick a sample size of 95 manufacturing firms, which represented different industrial sectors. The respondents were mainly managers of different manufacturing companies. The relationships proposed in the conceptual framework were tested using correlation analysis. The results indicate that higher levels of resilience practices in manufacturing firms can lead to enhanced competitive advantage and improved financial performance.

Older Adults Make Less Advantageous Decisions than Younger Adults: Cognitive and Psychological Correlates

PubMed Central

Fein, George; McGillivray, Shannon; Finn, Peter

2007-01-01

This study tested the hypotheses that older adults make less advantageous decisions than younger adults on the Iowa gambling task (IGT). Less advantageous decisions, as measured by the IGT, are characterized by choices that favor larger versus smaller immediate rewards, even though such choices may result in long-term negative consequences. The IGT, and measures of neuropsychological function, personality, and psychopathology were administered to 164 healthy adults 18–85 years of age. Older adults performed less advantageously on the IGT compared with younger adults. Additionally, a greater number of older adult’s IGT performances were classified as ‘impaired’ when compared to younger adults. Less advantageous decisions were associated with obsessive symptoms in older adults and with antisocial symptoms in younger adults. Performance on the IGT was positively associated with auditory working memory and psychomotor function in young adults, and in immediate memory in older adults. PMID:17445297

Experimental study of main rotor tip geometry and tail rotor interactions in hover. Volume 1. Text and figures

NASA Technical Reports Server (NTRS)

Balch, D. T.; Lombardi, J.

1985-01-01

A model scale hover test was conducted in the Sikorsky Aircraft Model rotor hover Facility to identify and quantify the impact of the tail rotor on the demonstrated advantages of advanced geometry tip configurations. The test was conducted using the Basic Model Test Rig and two scaled main rotor systems, one representing a 1/5.727 scale UH-60A BLACK HAWK and the others a 1/4.71 scale S-76. Eight alternate rotor tip configurations were tested, 3 on the BLACK HAWK rotor and 6 on the S-76 rotor. Four of these tips were then selected for testing in close proximity to an operating tail rotor (operating in both tractor and pusher modes) to determine if the performance advantages that could be obtained from the use of advanced geometry tips in a main rotor only environment would still exist in the more complex flow field involving a tail rotor. The test showed that overall the tail rotor effects on the advanced tip configurations tested are not substantially different from the effects on conventional tips.

Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials.

PubMed

Guttman, Nurit

2015-11-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reprint of "Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials".

PubMed

Guttman, Nurit

2016-12-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

Across language families: Genome diversity mirrors linguistic variation within Europe

PubMed Central

Longobardi, Giuseppe; Ghirotto, Silvia; Guardiano, Cristina; Tassi, Francesca; Benazzo, Andrea; Ceolin, Andrea

2015-01-01

ABSTRACT Objectives: The notion that patterns of linguistic and biological variation may cast light on each other and on population histories dates back to Darwin's times; yet, turning this intuition into a proper research program has met with serious methodological difficulties, especially affecting language comparisons. This article takes advantage of two new tools of comparative linguistics: a refined list of Indo‐European cognate words, and a novel method of language comparison estimating linguistic diversity from a universal inventory of grammatical polymorphisms, and hence enabling comparison even across different families. We corroborated the method and used it to compare patterns of linguistic and genomic variation in Europe. Materials and Methods: Two sets of linguistic distances, lexical and syntactic, were inferred from these data and compared with measures of geographic and genomic distance through a series of matrix correlation tests. Linguistic and genomic trees were also estimated and compared. A method (Treemix) was used to infer migration episodes after the main population splits. Results: We observed significant correlations between genomic and linguistic diversity, the latter inferred from data on both Indo‐European and non‐Indo‐European languages. Contrary to previous observations, on the European scale, language proved a better predictor of genomic differences than geography. Inferred episodes of genetic admixture following the main population splits found convincing correlates also in the linguistic realm. Discussion: These results pave the ground for previously unfeasible cross‐disciplinary analyses at the worldwide scale, encompassing populations of distant language families. Am J Phys Anthropol 157:630–640, 2015. © 2015 Wiley Periodicals, Inc. PMID:26059462

Late-onset hypogonadism: the advantages of treatment with human chorionic gonadotropin rather than testosterone.

PubMed

La Vignera, Sandro; Condorelli, Rosita Angela; Cimino, Laura; Russo, Giorgio Ivan; Morgia, Giuseppe; Calogero, Aldo E

2016-01-01

The traditional pharmacological treatment of patients with late onset hypogonadism (LOH) is represented by different formulations of testosterone (T) or alternatively by the extractive human chorionic gonadotropin (HCG). The hormone replacement treatment (HRT) is associated with the potential increase of hematocrit, serum concentrations of prostate-specific antigen (PSA) and prostate volume. Moreover, the gynecomastia represent a condition frequently associated with HRT. Recent evidences showed the role of leydig cells in the 25-hydroxylation of vitamin D and the elevated frequency of hypovitaminosis D among LOH patients. Finally, another important aspect of LOH is represented by the frequency of secondary infertility due to age or to traditional HRT. This study evaluated 40 LOH patients treated for 6 months with extractive HCG (n = 10 patients) and three different formulations of T: transdermal (n = 10 patients), undecaonate (n = 10 patients) and enantate (n = 10 patients). Hormonal, anthropometric, metabolic and sperm parameters were evaluated and compared. Moreover, the main safety parameters and the results of the main questionnaires were evaluated. After treatment, HCG group showed serum concentrations of 25-OH-vitamin D significantly higher (p < 0.05) and serum concentrations of oestrogens significantly lower (p < 0.05) compared with other groups. Moreover, they showed a mean value of hematocrit, PSA and prostate volume significantly lower (p < 0.05) compared with other groups. Finally, all the groups treated with T showed a significant reduction (p < 0.05) of sperm density and of percentage of spermatozoa with progressive motility compared with HCG group.

Comparing Teleworker Performance, Satisfaction, and Retention in the Joint Interoperability Test Command

ERIC Educational Resources Information Center

Hurd, Danny A.

2010-01-01

Telework is becoming one of the best options available to help organizations gain a competitive advantage. When management considers the fluctuating cost of fuel, emphasis on employee flexibility, and need to retain the most-qualified workforce, telework can be advantageous for solving problems. This quantitative comparative (non-experimental)…

Single-site Laparoscopic Colorectal Surgery Provides Similar Clinical Outcomes Compared to Standard Laparoscopic Surgery: An Analysis of 626 Patients

PubMed Central

Sangster, William; Messaris, Evangelos; Berg, Arthur S.; Stewart, David B.

2015-01-01

BACKGROUND Compared to standard laparoscopy, single-site laparoscopic colorectal surgerymay potentially offer advantages by creating fewer surgical incisions and providing a multi-functional trocar. Previous comparisons, however, have been limited by small sample sizes and selection bias. OBJECTIVE To compare 60-day outcomes between standard laparoscopic and single-site laparoscopic colorectal surgery patients undergoing elective and urgent surgeries. DESIGN This was an unselected retrospective cohort study comparing patients who underwent elective and unplanned standard laparoscopic or single-site laparoscopic colorectal resections for benign and malignant disease between 2008 and 2014. Outcomes were compared using univariate analyses. SETTING This study was conducted at a single institution. PATIENTS A total of 626 consecutive patients undergoing laparoscopic colorectal surgery were included. MAIN OUTCOME MEASURES Morbidity and mortality within 60 postoperative days. RESULTS 318 (51%) and 308 (49%) patients underwent standard laparoscopic and single-site laparoscopic procedures, respectively. No significant difference was noted in mean operative time (Standard laparoscopy 182.1 ± 81.3 vs. Single-site laparoscopy 177±86.5, p=0.30) and postoperative length of stay (Standard laparoscopy 4.8±3.4 vs. Single-site laparoscopy 5.5 ± 6.9, p=0.14). Conversions to laparotomy and 60-day readmissions were also similar for both cohorts across all procedures performed. A significant difference was identified in the number of patients who developed postoperative complications (Standard laparoscopy 19.2% vs. Single-site laparoscopy 10.7%, p=0.004), especially with respect to surgical-site infections (Standard laparoscopy 11.3% vs. Single-site laparoscopy 5.8%, p=0.02). LIMITATIONS This was a retrospective, single institution study. CONCLUSIONS Single-site laparoscopic colorectal surgery demonstrates similar results to standard laparoscopic colorectal surgery in regards to operative time, length of stay and readmissions. Single-site laparoscopic colorectal surgery may provide advantages in limiting the development of certain complications such as superficial surgical-site infections. PMID:26252848

Biopharmaceutical innovation and industrial developments in South Korea, Singapore and Taiwan.

PubMed

Hsieh, Chee-Ruey; Löfgren, Hans

2009-05-01

South Korea, Singapore and Taiwan are well known as export-oriented developmental states which for decades employed industrial policy to target particular industries for government support. In the past fifteen years, these three countries all identified the biopharmaceutical industry as a strategic sector. This article explores, through economic analysis, the rationale for this decision and the strategies chosen for linking into the global bio-economy with the objective of catching up in biopharmaceuticals. The paper identifies three comparative advantages enjoyed by these countries in the biopharma sector: (1) public investments in basic research; (2) private investments in phase 1 clinical trials; and (3) a potentially significant contract research industry managing latter-stage clinical trials. Governments employ a range of industrial policies, consistent with these comparative advantages, to promote the biopharmaceutical industry, including public investment in biomedical hubs, research funding and research and development (R&D) tax credits. We argue that the most important feature of the biopharmaceutical industry in these countries is the dominant role of the public sector. That these countries have made progress in innovative capabilities is illustrated by input measures such as R&D expenditure as share of gross domestic product, number of patents granted and clinical trials, and volume of foreign direct investment. In contrast, output indicators such as approval of new chemical entities suggest that the process of catching up has only just commenced. Pharmaceutical innovation is at the stage of mainly generating inputs to integrated processes controlled by the globally incumbent firms.

Evaluation of a 433 MHz band body sensor network for biomedical applications.

PubMed

Kim, Saim; Brendle, Christian; Lee, Hyun-Young; Walter, Marian; Gloeggler, Sigrid; Krueger, Stefan; Leonhardt, Steffen

2013-01-14

Body sensor networks (BSN) are an important research topic due to various advantages over conventional measurement equipment. One main advantage is the feasibility to deploy a BSN system for 24/7 health monitoring applications. The requirements for such an application are miniaturization of the network nodes and the use of wireless data transmission technologies to ensure wearability and ease of use. Therefore, the reliability of such a system depends on the quality of the wireless data transmission. At present, most BSNs use ZigBee or other IEEE 802.15.4 based transmission technologies. Here, we evaluated the performance of a wireless transmission system of a novel BSN for biomedical applications in the 433MHz ISM band, called Integrated Posture and Activity NEtwork by Medit Aachen (IPANEMA) BSN. The 433MHz ISM band is used mostly by implanted sensors and thus allows easy integration of such into the BSN. Multiple measurement scenarios have been assessed, including varying antenna orientations, transmission distances and the number of network participants. The mean packet loss rate (PLR) was 0.63% for a single slave, which is comparable to IEEE 802.15.4 BSNs in the proximity of Bluetooth or WiFi networks. Secondly, an enhanced version is evaluated during on-body measurements with five slaves. The mean PLR results show a comparable good performance for measurements on a treadmill (2.5%), an outdoor track (3.4%) and in a climate chamber (1.5%).

Role of particle radiotherapy in the management of head and neck cancer.

PubMed

Laramore, George E

2009-05-01

Modern imaging techniques and powerful computers allow a radiation oncologist to design treatments delivering higher doses of radiation than previously possible. Dose distributions imposed by the physics of 'standard' photon and electron beams limit further dose escalation. Hadron radiotherapy offers advantages in either dose distribution and/or improved radiobiology that may significantly improve the treatment of certain head and neck malignancies. Clinical studies support the effectiveness of fast-neutron radiotherapy in the treatment of major and minor salivary gland tumors. Data show highly favorable outcomes with proton radiotherapy for skull-base malignancies and tumors near highly critical normal tissues compared with that expected with standard radiotherapy. Heavy-ion radiotherapy clinical studies are mainly being conducted with fully stripped carbon ions, and limited data seem to indicate a possible improvement over proton radiotherapy for the same subset of radioresistant tumors where neutrons show a benefit over photons. Fast-neutron radiotherapy has different radiobiological properties compared with standard radiotherapy but similar depth dose distributions. Its role in the treatment of head and neck cancer is currently limited to salivary gland malignancies and certain radioresistant tumors such as sarcomas. Protons have the same radiobiological properties as standard radiotherapy beams but more optimal depth dose distributions, making it particularly advantageous when treating tumors adjacent to highly critical structures. Heavy ions combine the radiobiological properties of fast neutrons with the physical dose distributions of protons, and preliminary data indicate their utility for radioresistant tumors adjacent to highly critical structures.

Long-term effectiveness of a peer-based intervention to promote condom and contraceptive use among HIV-positive and at-risk women.

PubMed Central

Fogarty, L. A.; Heilig, C. M.; Armstrong, K.; Cabral, R.; Galavotti, C.; Gielen, A. C.; Green, B. M.

2001-01-01

OBJECTIVE: The authors used data from a larger study to evaluate the long-term effects of a peer advocate intervention on condom and contraceptive use among HIV-infected women and women at high risk for HIV infection. METHODS: HIV-infected women in one study and women at high risk for HIV infection in a second study were selected from the Women and Infants Demonstration Project and assigned to a standard or an enhanced HIV prevention treatment group. The enhanced intervention included support groups and one-on-one contacts with peer advocates tailored to clients' needs. The authors interviewed women at baseline and at 6-, 12- and 18-months, and measured changes in consistency of condom and contraceptive use and in self-efficacy and perceived advantages and disadvantages of condom and contraceptive use. RESULTS: Of HIV-infected women, the enhanced group had improved consistency in condom use, increased perceived advantages of condom use, and increased level of self-efficacy compared with the standard group. Of women at risk, the enhanced intervention group at six months maintained consistent condom use with a main partner and perceived more benefit of condom use compared with the standard group. These differences diminished at 12 months. CONCLUSIONS: The enhanced intervention was generally effective in the HIV+ study. In the at-risk study, however, intervention effects were minimal and short-lived. Factors related to the theory, intervention design, and sample characteristics help explain these differences. PMID:11889279

Incorporating networks in a probabilistic graphical model to find drivers for complex human diseases.

PubMed

Mezlini, Aziz M; Goldenberg, Anna

2017-10-01

Discovering genetic mechanisms driving complex diseases is a hard problem. Existing methods often lack power to identify the set of responsible genes. Protein-protein interaction networks have been shown to boost power when detecting gene-disease associations. We introduce a Bayesian framework, Conflux, to find disease associated genes from exome sequencing data using networks as a prior. There are two main advantages to using networks within a probabilistic graphical model. First, networks are noisy and incomplete, a substantial impediment to gene discovery. Incorporating networks into the structure of a probabilistic models for gene inference has less impact on the solution than relying on the noisy network structure directly. Second, using a Bayesian framework we can keep track of the uncertainty of each gene being associated with the phenotype rather than returning a fixed list of genes. We first show that using networks clearly improves gene detection compared to individual gene testing. We then show consistently improved performance of Conflux compared to the state-of-the-art diffusion network-based method Hotnet2 and a variety of other network and variant aggregation methods, using randomly generated and literature-reported gene sets. We test Hotnet2 and Conflux on several network configurations to reveal biases and patterns of false positives and false negatives in each case. Our experiments show that our novel Bayesian framework Conflux incorporates many of the advantages of the current state-of-the-art methods, while offering more flexibility and improved power in many gene-disease association scenarios.

Evaluation of bridge deck delamination investigation methods

DOT National Transportation Integrated Search

1998-07-01

An objective view of the relative advantages and limitations of the nondestructive, testing and evaluation methods that currently used in the inspection of bridge decks is presented and discussed. The three main nondestructive testing technologies th...

Data survey on the effect of product features on competitive advantage of selected firms in Nigeria.

PubMed

Olokundun, Maxwell; Iyiola, Oladele; Ibidunni, Stephen; Falola, Hezekiah; Salau, Odunayo; Amaihian, Augusta; Peter, Fred; Borishade, Taiye

2018-06-01

The main objective of this study was to present a data article that investigates the effect product features on firm's competitive advantage. Few studies have examined how the features of a product could help in driving the competitive advantage of a firm. Descriptive research method was used. Statistical Package for Social Sciences (SPSS 22) was engaged for analysis of one hundred and fifty (150) valid questionnaire which were completed by small business owners registered under small and medium scale enterprises development of Nigeria (SMEDAN). Stratified and simple random sampling techniques were employed; reliability and validity procedures were also confirmed. The field data set is made publicly available to enable critical or extended analysis.

Adolescents' experiences and perceived (dis)advantages of the three main outlet types for alcohol purchases.

PubMed

Gosselt, Jordy F; Strump, Tanja; Van Hoof, Joris

2016-12-01

Based on the existing literature, relevant determinants of availability for on-premises locations, off-premises locations, and the Internet were qualitatively explored and categorized by "experts" consisting of underage alcohol purchasers. In total, 14 focus group discussions were conducted with 94 Dutch adolescents. For on-premises locations, the high prices were perceived as the biggest disadvantage, and the ease to circumvent legal age limits as the biggest advantage. For off-premises locations, the cheap pricing was perceived as the most positive aspect, and the legal age limit as the biggest disadvantage. For online purchases, the waiting time was perceived as the most negative aspect, and the proximity of online stores as the biggest advantage. © The Author(s) 2015.

Innovative modified hair follicle harvesting technique with reverse rake scalp elevator for lower occipital donor area in follicular unit extraction hair transplantation

PubMed Central

Gharwade, Chandrakant Rambhau

2016-01-01

Follicular unit extraction (FUE) is one of the widely practiced minimally invasive follicular harvesting techniques employed during hair transplantation. FUE technique has an advantage of utilising lower occipital area and supra-auricular region as a safe donor area described by Unger, in addition to the standard occipital donor area used in strip method (follicular unit transplant). Despite its potential advantages such as rapid recovery, minimal scarring and reduced post-operative pain; its widespread acceptance is limited due to various factors in variable contribution like steeper learning curve and potentially higher follicular transection rates (FTRs). The main practical drawbacks in harvesting FUE from lower occipital donor region that lie inferior to the standard donor area, is its acute angle (10°–15°) of emergent hair from scalp skin, higher variance angle (15°–35°) between hairs below the skin and hair exit angle above the skin and comparatively loose scalp, preventing to provide stable platform for punching. Hair transplant surgeon faces difficulty in aligning and engaging the FUE punch leading to very high hair follicle transection rate, and therefore, it is not a preferred site for harvesting follicles in FUE. Authors description of modified technique using reverse rake scalp elevator helps in negating the acute angle of the hair follicles exit from scalp skin and reducing the variance angle between emergent hair and hair below the skin in lower occipital region thereby reducing FTR. Furthermore, an added advantage of reducing the overall operative time and surgeon fatigue, improve donor area healing, availability of a comparatively larger donor area which increases the confidence of the beginners. This method will be of help as it is easy to duplicate and follow by novice hair transplant surgeons and also for those who are routinely doing mega hair transplants sessions. PMID:28216821

Life on an Island: Early Settlers off the Rock Bound Coast of Maine. Teaching with Historic Places.

ERIC Educational Resources Information Center

Hobbs-Olson, Laurie

This lesson, based on National Register of Historic Places files, describes early settlers' lives on some of the approximately 5,000 islands off the coast of Maine. During the mid-18th century many of these islands began to be inhabited by settlers eager to take advantage of this interface between land and sea. The lesson discusses the Blue Duck…

On the adaptivity and complexity embedded into differential evolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senkerik, Roman; Pluhacek, Michal; Jasek, Roman

2016-06-08

This research deals with the comparison of the two modern approaches for evolutionary algorithms, which are the adaptivity and complex chaotic dynamics. This paper aims on the investigations on the chaos-driven Differential Evolution (DE) concept. This paper is aimed at the embedding of discrete dissipative chaotic systems in the form of chaotic pseudo random number generators for the DE and comparing the influence to the performance with the state of the art adaptive representative jDE. This research is focused mainly on the possible disadvantages and advantages of both compared approaches. Repeated simulations for Lozi map driving chaotic systems were performedmore » on the simple benchmark functions set, which are more close to the real optimization problems. Obtained results are compared with the canonical not-chaotic and not adaptive DE. Results show that with used simple test functions, the performance of ChaosDE is better in the most cases than jDE and Canonical DE, furthermore due to the unique sequencing in CPRNG given by the hidden chaotic dynamics, thus better and faster selection of unique individuals from population, ChaosDE is faster.« less

Comparsion analysis of data mining models applied to clinical research in traditional Chinese medicine.

PubMed

Zhao, Yufeng; Xie, Qi; He, Liyun; Liu, Baoyan; Li, Kun; Zhang, Xiang; Bai, Wenjing; Luo, Lin; Jing, Xianghong; Huo, Ruili

2014-10-01

To help researchers selecting appropriate data mining models to provide better evidence for the clinical practice of Traditional Chinese Medicine (TCM) diagnosis and therapy. Clinical issues based on data mining models were comprehensively summarized from four significant elements of the clinical studies: symptoms, symptom patterns, herbs, and efficacy. Existing problems were further generalized to determine the relevant factors of the performance of data mining models, e.g. data type, samples, parameters, variable labels. Combining these relevant factors, the TCM clinical data features were compared with regards to statistical characters and informatics properties. Data models were compared simultaneously from the view of applied conditions and suitable scopes. The main application problems were the inconsistent data type and the small samples for the used data mining models, which caused the inappropriate results, even the mistake results. These features, i.e. advantages, disadvantages, satisfied data types, tasks of data mining, and the TCM issues, were summarized and compared. By aiming at the special features of different data mining models, the clinical doctors could select the suitable data mining models to resolve the TCM problem.

Percutaneous endoscopic gastrostomy versus nasogastric tube feeding for patients with head and neck cancer: a systematic review

PubMed Central

Wang, Jinfeng; Liu, Minjie; Liu, Chao; Ye, Yun; Huang, Guanhong

2014-01-01

There are two main enteral feeding strategies—namely nasogastric (NG) tube feeding and percutaneous gastrostomy—used to improve the nutritional status of patients with head and neck cancer (HNC). But up till now there has been no consistent evidence about which method of enteral feeding is the optimal method for this patient group. To compare the effectiveness of percutaneous gastrostomy and NGT feeding in patients with HNC, relevant literature was identified through Medline, Embase, Pubmed, Cochrane, Wiley and manual searches. We included randomized controlled trials (RCTs) and non-experimental studies comparing percutaneous gastrostomy—including percutaneous endoscopic gastrostomy (PEG) and percutaneous fluoroscopic gastrostomy (PFG) —with NG for HNC patients. Data extraction recorded characteristics of intervention, type of study and factors that contributed to the methodological quality of the individual studies. Data were then compared with respect to nutritional status, duration of feeding, complications, radiotherapy delays, disease-free survival and overall survival. Methodological quality of RCTs and non-experimental studies were assessed with separate standard grading scales. It became apparent from our studies that both feeding strategies have advantages and disadvantages. PMID:24453356

Percutaneous endoscopic gastrostomy versus nasogastric tube feeding for patients with head and neck cancer: a systematic review.

PubMed

Wang, Jinfeng; Liu, Minjie; Liu, Chao; Ye, Yun; Huang, Guanhong

2014-05-01

There are two main enteral feeding strategies-namely nasogastric (NG) tube feeding and percutaneous gastrostomy-used to improve the nutritional status of patients with head and neck cancer (HNC). But up till now there has been no consistent evidence about which method of enteral feeding is the optimal method for this patient group. To compare the effectiveness of percutaneous gastrostomy and NGT feeding in patients with HNC, relevant literature was identified through Medline, Embase, Pubmed, Cochrane, Wiley and manual searches. We included randomized controlled trials (RCTs) and non-experimental studies comparing percutaneous gastrostomy-including percutaneous endoscopic gastrostomy (PEG) and percutaneous fluoroscopic gastrostomy (PFG) -with NG for HNC patients. Data extraction recorded characteristics of intervention, type of study and factors that contributed to the methodological quality of the individual studies. Data were then compared with respect to nutritional status, duration of feeding, complications, radiotherapy delays, disease-free survival and overall survival. Methodological quality of RCTs and non-experimental studies were assessed with separate standard grading scales. It became apparent from our studies that both feeding strategies have advantages and disadvantages.

Thermal injury models for optical treatment of biological tissues: a comparative study.

PubMed

Fanjul-Velez, Felix; Ortega-Quijano, Noe; Salas-Garcia, Irene; Arce-Diego, Jose L

2010-01-01

The interaction of optical radiation with biological tissues causes an increase in the temperature that, depending on its magnitude, can provoke a thermal injury process in the tissue. The establishment of laser irradiation pathological limits constitutes an essential task, as long as it enables to fix and delimit a range of parameters that ensure a safe treatment in laser therapies. These limits can be appropriately described by kinetic models of the damage processes. In this work, we present and compare several models for the study of thermal injury in biological tissues under optical illumination, particularly the Arrhenius thermal damage model and the thermal dosimetry model based on CEM (Cumulative Equivalent Minutes) 43°C. The basic concepts that link the temperature and exposition time with the tissue injury or cellular death are presented, and it will be shown that they enable to establish predictive models for the thermal damage in laser therapies. The results obtained by both models will be compared and discussed, highlighting the main advantages of each one and proposing the most adequate one for optical treatment of biological tissues.

Magnetoelectric versus thermal actuation characteristics of shear force AFM probes with piezoresistive detection

NASA Astrophysics Data System (ADS)

Sierakowski, Andrzej; Kopiec, Daniel; Majstrzyk, Wojciech; Kunicki, Piotr; Janus, Paweł; Dobrowolski, Rafał; Grabiec, Piotr; Rangelow, Ivo W.; Gotszalk, Teodor

2017-03-01

In this paper the authors compare methods used for piezoresistive microcantilevers actuation for the atomic force microscopy (AFM) imaging in the dynamic shear force mode. The piezoresistive detection is an attractive technique comparing the optical beam detection of deflection. The principal advantage is that no external alignment of optical source and detector are needed. When the microcantilever is deflected, the stress is transferred into a change of resistivity of piezoresistors. The integration of piezoresistive read-out provides a promising solution in realizing a compact non-contact AFM. Resolution of piezoresistive read-out is limited by three main noise sources: Johnson, 1/f and thermomechanical noise. In the dynamic shear force mode measurement the method used for cantilever actuation will also affect the recorded noise in the piezoresistive detection circuit. This is the result of a crosstalk between an aluminium path (current loop used for actuation) and piezoresistors located near the base of the beam. In this paper authors described an elaborated in ITE (Institute of Electron Technology) technology of fabrication cantilevers with piezoresistive detection of deflection and compared efficiency of two methods used for cantilever actuation.

Intermittent aortic cross-clamping for isolated CABG can save lives and money: experience with 15307 patients.

PubMed

Boethig, D; Minami, K; Lueth, J-U; El-Banayosy, A; Breymann, T; Koerfer, R

2004-06-01

The ideal myocardial protection during isolated CABG is still a matter of debate. Cardioplegia versus intermittent aortic cross-clamping (IACC) are the main opponents; the following article shows that IACC can be safe, efficient and might be cheaper than cardioplegia. Demographics and co-morbidities of 15307 CABG only patients consecutively operated on between January 1993 and October 2001 in the Heart Center in Bad Oeynhausen were assessed by the German Quality Assurance data set and risk-stratified using the EuroSCORE. Outcome (30-day or in-hospital mortality) was compared to the expected EuroSCORE estimation. Expected mortality was 3.25 %, observed mortality was 1.3 %, being significantly lower in the low, medium as well as high risk patients subgroup. Complication rates increased steadily with expected mortality rates. Stroke and myocardial infarction rates for patients with peripheral vessel disease were not higher than in comparable studies. More than 1000000 EUR were saved by lower cardioplegia bills. Myocardial protection with intermittent aortic cross-clamping for isolated CABG can be safe, effective, and economically advantageous when compared to cardioplegic solutions.

Electrochemistry coupled online to liquid chromatography-mass spectrometry for fast simulation of biotransformation reactions of the insecticide chlorpyrifos.

PubMed

Mekonnen, Tessema F; Panne, Ulrich; Koch, Matthias

2017-05-01

An automated method is presented for fast simulation of (bio)transformation products (TPs) of the organophosphate insecticide chlorpyrifos (CPF) based on electrochemistry coupled online to liquid chromatography-mass spectrometry (EC-LC-MS). Oxidative TPs were produced by a boron doped diamond (BDD) electrode, separated by reversed phase HPLC and online detected by electrospray ionization-mass spectrometry (ESI-MS). Furthermore, EC oxidative TPs were investigated by HPLC-tandem mass spectrometry (LC-MS/MS) and FT-ICR high resolution mass spectrometry (HRMS) and compared to in vitro assay metabolites (rat and human liver microsomes). Main phase I metabolites of CPF: chlorpyrifos oxon (CPF oxon), trichloropyridinol (TCP), diethylthiophosphate (DETP), diethylphosphate (DEP), desethyl chlorpyrifos (De-CPF), and desethyl chlorpyrifos oxon (De-CPF oxon), were successfully identified by the developed EC-LC-MS method. The EC-LC-MS method showed similar metabolites compared to the in vitro assay with possibilities of determining reactive species. Our results reveal that online EC-(LC)-MS brings an advantage on time of analysis by eliminating sample preparation steps and matrix complexity compared to conventional in vivo or in vitro methods.

Methods of Muscle Activation Onset Timing Recorded During Spinal Manipulation.

PubMed

Currie, Stuart J; Myers, Casey A; Krishnamurthy, Ashok; Enebo, Brian A; Davidson, Bradley S

2016-05-01

The purpose of this study was to determine electromyographic threshold parameters that most reliably characterize the muscular response to spinal manipulation and compare 2 methods that detect muscle activity onset delay: the double-threshold method and cross-correlation method. Surface and indwelling electromyography were recorded during lumbar side-lying manipulations in 17 asymptomatic participants. Muscle activity onset delays in relation to the thrusting force were compared across methods and muscles using a generalized linear model. The threshold combinations that resulted in the lowest Detection Failures were the "8 SD-0 milliseconds" threshold (Detection Failures = 8) and the "8 SD-10 milliseconds" threshold (Detection Failures = 9). The average muscle activity onset delay for the double-threshold method across all participants was 149 ± 152 milliseconds for the multifidus and 252 ± 204 milliseconds for the erector spinae. The average onset delay for the cross-correlation method was 26 ± 101 for the multifidus and 67 ± 116 for the erector spinae. There were no statistical interactions, and a main effect of method demonstrated that the delays were higher when using the double-threshold method compared with cross-correlation. The threshold parameters that best characterized activity onset delays were an 8-SD amplitude and a 10-millisecond duration threshold. The double-threshold method correlated well with visual supervision of muscle activity. The cross-correlation method provides several advantages in signal processing; however, supervision was required for some results, negating this advantage. These results help standardize methods when recording neuromuscular responses of spinal manipulation and improve comparisons within and across investigations. Copyright © 2016 National University of Health Sciences. Published by Elsevier Inc. All rights reserved.

Strongly-motivated positive affects induce faster responses to local than global information of visual stimuli: an approach using large-size Navon letters.

PubMed

Noguchi, Yasuki; Tomoike, Kouta

2016-01-12

Recent studies argue that strongly-motivated positive emotions (e.g. desire) narrow a scope of attention. This argument is mainly based on an observation that, while humans normally respond faster to global than local information of a visual stimulus (global advantage), positive affects eliminated the global advantage by selectively speeding responses to local (but not global) information. In other words, narrowing of attentional scope was indirectly evidenced by the elimination of global advantage (the same speed of processing between global and local information). No study has directly shown that strongly-motivated positive affects induce faster responses to local than global information while excluding a bias for global information (global advantage) in a baseline (emotionally-neutral) condition. In the present study, we addressed this issue by eliminating the global advantage in a baseline (neutral) state. Induction of positive affects under this state resulted in faster responses to local than global information. Our results provided direct evidence that positive affects in high motivational intensity narrow a scope of attention.

Left-handers show no self-advantage in detecting a delay in visual feedback concerning an active movement.

PubMed

Hoover, Adria E N; Elzein, Yasmeenah; Harris, Laurence R

2016-07-01

Right-handed people show an advantage in detecting a delay in visual feedback concerning an active movement of their right hand when it is viewed in a natural perspective compared to when it is seen as if viewing another person's hand (Hoover and Harris in Exp Brain Res 233:1053-1060, 2012. doi: 10.1007/s00221-014-4181-9 ; Exp Brain Res 222:389-397, 2015a. doi: 10.1007/s00221-012-3224-3 ). This self-advantage is unique to their dominant hand and may reflect an enhanced sense of ownership which contributes to how right-handed people relate to the world. Here we asked whether left-handers show the same pattern of performance for their dominant hand. We measured the minimum delay that could be detected by 29 left-handers when viewing either their dominant or non-dominant hand from 'self' or 'other' perspectives and compared their thresholds to an age-matched sample of 22 right-handers. Right-handers showed a significant signature self-advantage of 19 ms when viewing their dominant hand in an expected 'self' perspective compared to 'other' perspectives. Left-handers, however, showed no such advantage for either their dominant or non-dominant hand. This lack of self-advantage in detecting delayed visual feedback might indicate a less secure sense of body ownership amongst left-handers.

Habitat segregation mediates predation by the benthic fish Cottus gobio on the exotic amphipod species Gammarus roeseli

NASA Astrophysics Data System (ADS)

Kaldonski, Nicolas; Lagrue, Clément; Motreuil, Sébastien; Rigaud, Thierry; Bollache, Loïc

2008-09-01

Predation is often considered as one of the most important biotic factor determining the success of exotic species. The freshwater amphipod Gammarus roeseli has widely colonized Western Europe, where it is frequently found in sympatry with the native species ( Gammarus pulex). Previous laboratory experiments revealed that G. roeseli may have an advantage over G. pulex through differential predation by native fish (brown trout). Morphological anti-predator defences (spines) were found responsible for lower rates of predation on the invasive G. roeseli. Here, using both field surveys and laboratory experiments, we tested if a differential of predation exists with other fish predators naturally encountered by gammarids. The main predators present in our field site were nocturnal benthic feeders (mainly bullheads, Cottus gobio). Fish diet analysis showed that, compared to its global availability in the river, G. roeseli was less consumed than G. pulex. In the field, however, G. roeseli was found mainly in the aquatic vegetation whereas G. pulex was found in all habitat types. Laboratory experiments in microcosms revealed that G. roeseli was less prone to predation by C. gobio only when vegetation was present. Depending on the type of predator, the differential of predation could therefore be mediated by antipredator behaviour, and a better usage of refuges, rather than by morphological defences.

UAV Deployment Exercise for Mapping Purposes: Evaluation of Emergency Response Applications

PubMed Central

Boccardo, Piero; Chiabrando, Filiberto; Dutto, Furio; Giulio Tonolo, Fabio; Lingua, Andrea

2015-01-01

Exploiting the decrease of costs related to UAV technology, the humanitarian community started piloting the use of similar systems in humanitarian crises several years ago in different application fields, i.e., disaster mapping and information gathering, community capacity building, logistics and even transportation of goods. Part of the author’s group, composed of researchers in the field of applied geomatics, has been piloting the use of UAVs since 2006, with a specific focus on disaster management application. In the framework of such activities, a UAV deployment exercise was jointly organized with the Regional Civil Protection authority, mainly aimed at assessing the operational procedures to deploy UAVs for mapping purposes and the usability of the acquired data in an emergency response context. In the paper the technical features of the UAV platforms will be described, comparing the main advantages/disadvantages of fixed-wing versus rotor platforms. The main phases of the adopted operational procedure will be discussed and assessed especially in terms of time required to carry out each step, highlighting potential bottlenecks and in view of the national regulation framework, which is rapidly evolving. Different methodologies for the processing of the acquired data will be described and discussed, evaluating the fitness for emergency response applications. PMID:26147728

A Direct Test of the Theory of Comparative Advantage: The Case of Japan.

ERIC Educational Resources Information Center

Bernhofen, Daniel M.; Brown, John C.

2004-01-01

We exploit Japan's sudden and complete opening up to international trade in the 1860s to test the empirical validity of one of the oldest and most fundamental propositions in economics: the theory of comparative advantage. Historical evidence supports the assertion that the characteristics of the Japanese economy at the time were compatible with…

India's Information Technology Sector: What Contribution to Broader Economic Development? OECD Development Centre Working Paper, No. 207 (Formerly Technical Paper No. 207)

ERIC Educational Resources Information Center

Singh, Nirvikar

2003-01-01

What contribution can information technology (IT) make to India's overall economic development? This paper provides an analytical framework centred around the concepts of comparative advantage, complementarities, and innovation. There is strong evidence that India has a strong and sustainable comparative advantage in software development and…

A Roy Model of Social Interactions. NBER Working Paper No. 16880

ERIC Educational Resources Information Center

Cicala, Steve; Fryer, Roland G., Jr.; Spenkuch, Jorg L.

2011-01-01

We develop a Roy model of social interactions in which individuals sort into peer groups based on comparative advantage. Two key results emerge: First, when comparative advantage is the guiding principle of peer group organization, the effect of moving a student into an environment with higher-achieving peers depends on where in the ability…

Medicare Advantage Enrollees More Likely To Enter Lower-Quality Nursing Homes Compared To Fee-For-Service Enrollees

PubMed Central

Meyers, David J.; Mor, Vincent; Rahman, Momotazur

2018-01-01

Unlike fee-for-service (FFS) Medicare, most Medicare Advantage (MA) plans have a preferred network of care providers that serve most of a plan’s enrollees. Little is known about how the quality of care MA enrollees receive differs from that of FFS Medicare enrollees. This article evaluates the differences in the quality of skilled nursing facilities (SNFs) that Medicare Advantage and FFS beneficiaries entered in the period 2012–14. After we controlled for patients’ clinical, demographic, and residential neighborhood effects, we found that FFS Medicare patients have substantially higher probabilities of entering higher-quality SNFs (those rated four or five stars by Nursing Home Compare) and those with lower readmission rates, compared to MA enrollees. The difference between MA and FFS Medicare SNF selections was less for enrollees in higher-quality MA plans than those in lower-quality plans, but Medicare Advantage still guided patients to lower-quality facilities. PMID:29309215

Advantages and Pitfalls of Mass Spectrometry Based Metabolome Profiling in Systems Biology.

PubMed

Aretz, Ina; Meierhofer, David

2016-04-27

Mass spectrometry-based metabolome profiling became the method of choice in systems biology approaches and aims to enhance biological understanding of complex biological systems. Genomics, transcriptomics, and proteomics are well established technologies and are commonly used by many scientists. In comparison, metabolomics is an emerging field and has not reached such high-throughput, routine and coverage than other omics technologies. Nevertheless, substantial improvements were achieved during the last years. Integrated data derived from multi-omics approaches will provide a deeper understanding of entire biological systems. Metabolome profiling is mainly hampered by its diversity, variation of metabolite concentration by several orders of magnitude and biological data interpretation. Thus, multiple approaches are required to cover most of the metabolites. No software tool is capable of comprehensively translating all the data into a biologically meaningful context yet. In this review, we discuss the advantages of metabolome profiling and main obstacles limiting progress in systems biology.

Advantages and Pitfalls of Mass Spectrometry Based Metabolome Profiling in Systems Biology

PubMed Central

Aretz, Ina; Meierhofer, David

2016-01-01

Mass spectrometry-based metabolome profiling became the method of choice in systems biology approaches and aims to enhance biological understanding of complex biological systems. Genomics, transcriptomics, and proteomics are well established technologies and are commonly used by many scientists. In comparison, metabolomics is an emerging field and has not reached such high-throughput, routine and coverage than other omics technologies. Nevertheless, substantial improvements were achieved during the last years. Integrated data derived from multi-omics approaches will provide a deeper understanding of entire biological systems. Metabolome profiling is mainly hampered by its diversity, variation of metabolite concentration by several orders of magnitude and biological data interpretation. Thus, multiple approaches are required to cover most of the metabolites. No software tool is capable of comprehensively translating all the data into a biologically meaningful context yet. In this review, we discuss the advantages of metabolome profiling and main obstacles limiting progress in systems biology. PMID:27128910

Simultaneous detection and determination of mercury (II) and lead (II) ions through the achievement of novel functional nucleic acid-based biosensors.

PubMed

Khoshbin, Zahra; Housaindokht, Mohammad Reza; Verdian, Asma; Bozorgmehr, Mohammad Reza

2018-09-30

The serious threats of mercury (Hg 2+ ) and lead (Pb 2+ ) ions for the public health makes it important to achieve the detection methods of the ions with high affinity and specificity. Metal ions usually coexist in some environment and foodstuff or clinical samples. Therefore, it is very necessary to develop a fast and simple method for simultaneous monitoring the amount of metal ions, especially when Hg 2+ and Pb 2+ coexist. DNAzyme-based biosensors and aptasensors have been highly regarded for this purpose as two main groups of the functional nucleic acid (FNA)-based biosensors. In this review, we summarize the recent achievements of functional nucleic acid-based biosensors for the simultaneous detection of Hg 2+ and Pb 2+ ions in two main optical and electrochemical groups. The tremendous interest in utilizing the various nanomaterials is also highlighted in the fabrication of the FNA-based biosensors. Finally, some results are presented based on the advantages and disadvantages of the studied FNA-based biosensors to compare their validation. Copyright © 2018 Elsevier B.V. All rights reserved.

[Research advances in identifying nitrate pollution sources of water environment by using nitrogen and oxygen stable isotopes].

PubMed

Mao, Wei; Liang, Zhi-wei; Li, Wei; Zhu, Yao; Yanng, Mu-yi; Jia, Chao-jie

2013-04-01

Water body' s nitrate pollution has become a common and severe environmental problem. In order to ensure human health and water environment benign evolution, it is of great importance to effectively identify the nitrate pollution sources of water body. Because of the discrepant composition of nitrogen and oxygen stable isotopes in different sources of nitrate in water body, nitrogen and oxygen stable isotopes can be used to identify the nitrate pollution sources of water environment. This paper introduced the fractionation factors of nitrogen and oxygen stable isotopes in the main processes of nitrogen cycling and the composition of these stable isotopes in main nitrate sources, compared the advantages and disadvantages of five pre-treatment methods for analyzing the nitrogen and oxygen isotopes in nitrate, and summarized the research advances in this aspect into three stages, i. e. , using nitrogen stable isotope alone, using nitrogen and oxygen stable isotopes simultaneously, and combining with mathematical models. The future research directions regarding the nitrate pollution sources identification of water environment were also discussed.

High Performance ZVT with Bus Clamping Modulation Technique for Single Phase Full Bridge Inverters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xia, Yinglai; Ayyanar, Raja

2016-03-20

This paper proposes a topology based on bus clamping modulation and zero-voltage-transition (ZVT) technique to realize zero-voltage-switching (ZVS) for all the main switches of the full bridge inverters, and inherent ZVS and/or ZCS for the auxiliary switches. The advantages of the strategy include significant reduction in the turn-on loss of the ZVT auxiliary switches which typically account for a major part of the total loss in other ZVT circuits, and reduction in the voltage ratings of auxiliary switches. The modulation scheme and the commutation stages are analyzed in detail. Finally, a 1kW, 500 kHz switching frequency inverter of the proposedmore » topology using SiC MOSFETs has been built to validate the theoretical analysis. The ZVT with bus clamping modulation technique of fixed timing and adaptive timing schemes are implemented in DSP TMS320F28335 resulting in full ZVS for the main switches in the full bridge inverter. The proposed scheme can save up to 33 % of the switching loss compared with no ZVT case.« less

Post-processing method for wind speed ensemble forecast using wind speed and direction

NASA Astrophysics Data System (ADS)

Sofie Eide, Siri; Bjørnar Bremnes, John; Steinsland, Ingelin

2017-04-01

Statistical methods are widely applied to enhance the quality of both deterministic and ensemble NWP forecasts. In many situations, like wind speed forecasting, most of the predictive information is contained in one variable in the NWP models. However, in statistical calibration of deterministic forecasts it is often seen that including more variables can further improve forecast skill. For ensembles this is rarely taken advantage of, mainly due to that it is generally not straightforward how to include multiple variables. In this study, it is demonstrated how multiple variables can be included in Bayesian model averaging (BMA) by using a flexible regression method for estimating the conditional means. The method is applied to wind speed forecasting at 204 Norwegian stations based on wind speed and direction forecasts from the ECMWF ensemble system. At about 85 % of the sites the ensemble forecasts were improved in terms of CRPS by adding wind direction as predictor compared to only using wind speed. On average the improvements were about 5 %, but mainly for moderate to strong wind situations. For weak wind speeds adding wind direction had more or less neutral impact.

A test of the optimality approach to modelling canopy properties and CO2 uptake by natural vegetation.

PubMed

Schymanski, Stanislaus J; Roderick, Michael L; Sivapalan, Murugesu; Hutley, Lindsay B; Beringer, Jason

2007-12-01

Photosynthesis provides plants with their main building material, carbohydrates, and with the energy necessary to thrive and prosper in their environment. We expect, therefore, that natural vegetation would evolve optimally to maximize its net carbon profit (NCP), the difference between carbon acquired by photosynthesis and carbon spent on maintenance of the organs involved in its uptake. We modelled N(CP) for an optimal vegetation for a site in the wet-dry tropics of north Australia based on this hypothesis and on an ecophysiological gas exchange and photosynthesis model, and compared the modelled CO2 fluxes and canopy properties with observations from the site. The comparison gives insights into theoretical and real controls on gas exchange and canopy structure, and supports the optimality approach for the modelling of gas exchange of natural vegetation. The main advantage of the optimality approach we adopt is that no assumptions about the particular vegetation of a site are required, making it a very powerful tool for predicting vegetation response to long-term climate or land use change.

Simultaneous fingerprint, quantitative analysis and anti-oxidative based screening of components in Rhizoma Smilacis Glabrae using liquid chromatography coupled with Charged Aerosol and Coulometric array Detection.

PubMed

Yang, Guang; Zhao, Xin; Wen, Jun; Zhou, Tingting; Fan, Guorong

2017-04-01

An analytical approach including fingerprint, quantitative analysis and rapid screening of anti-oxidative components was established and successfully applied for the comprehensive quality control of Rhizoma Smilacis Glabrae (RSG), a well-known Traditional Chinese Medicine with the homology of medicine and food. Thirteen components were tentatively identified based on their retention behavior, UV absorption and MS fragmentation patterns. Chemometric analysis based on coulmetric array data was performed to evaluate the similarity and variation between fifteen batches. Eight discriminating components were quantified using single-compound calibration. The unit responses of those components in coulmetric array detection were calculated and compared with those of several compounds reported to possess antioxidant activity, and four of them were tentatively identified as main contributors to the total anti-oxidative activity. The main advantage of the proposed approach was that it realized simultaneous fingerprint, quantitative analysis and screening of anti-oxidative components, providing comprehensive information for quality assessment of RSG. Copyright © 2017 Elsevier B.V. All rights reserved.

Innovative Model of Practice-Oriented Training of Employees of the Town-Forming Enterprise in the Mining Region (by the Example of JSC "SUEK-Kuzbass")

NASA Astrophysics Data System (ADS)

Kulay, Svetlana; Kayachev, Gennady

2017-11-01

The article proposes to improve the system of training of employees of joint-stock company SUEK-Kuzbass in the educational institutions of the Kemerovo region according to the requirements of the company using practice-oriented training technology. The aim of the work is to substantiate the effectiveness of implementing practice-oriented training, identify priority directions and ways of its development. The main objectives of the study are: to identify the main advantages for the company and students; determine the criteria for the success and practical value of applying practice-oriented training for the company; conduct a comparative analysis of the target and practice-oriented model of training for the company. The real needs of the employer through the dual form of training were taking into account. The expansion of positive experience in training engineering personnel in higher education in technology-based training with the involvement of specialists from other regions of the company and expanding training in mining was also included.

Application of Ozone MBBR Process in Refinery Wastewater Treatment

NASA Astrophysics Data System (ADS)

Lin, Wang

2018-01-01

Moving Bed Biofilm Reactor (MBBR) is a kind of sewage treatment technology based on fluidized bed. At the same time, it can also be regarded as an efficient new reactor between active sludge method and the biological membrane method. The application of ozone MBBR process in refinery wastewater treatment is mainly studied. The key point is to design the ozone +MBBR combined process based on MBBR process. The ozone +MBBR process is used to analyze the treatment of concentrated water COD discharged from the refinery wastewater treatment plant. The experimental results show that the average removal rate of COD is 46.0%~67.3% in the treatment of reverse osmosis concentrated water by ozone MBBR process, and the effluent can meet the relevant standard requirements. Compared with the traditional process, the ozone MBBR process is more flexible. The investment of this process is mainly ozone generator, blower and so on. The prices of these items are relatively inexpensive, and these costs can be offset by the excess investment in traditional activated sludge processes. At the same time, ozone MBBR process has obvious advantages in water quality, stability and other aspects.

Paraquat-induced lightwood in two European conifers - Scotch pine and Norway spruce

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wroblewska, H.; Conner, A.H.; Rowe, J.W.

1978-04-01

Paraquat treatment induced oleoresin-soaked lightwood in Scotch pine; borehole and ax-frill treatment methods were equally effective. Paraquat treatment of Norway spruce induced limited lightwood formation accompanied by heavy external oleoresin exudation. Thus paraquat treatment of Scotch pine and possibly Norway spruce could be commercially advantageous for increasing naval stores production from these species. Analysis of tall oil precursors (nonvolatile ether extractives) for resin acids, fatty acids, and nonsaponifiables showed that the increase from paraquat treatment was mainly from an increased resin acid content. The chemical composition of the resin acids from the lightwood and control wood areas was similar andmore » consisted of the usual pimaric and abietic type resin acids found in conifers. The fatty acids were predominately unsaturated C/sub 18/ isomers. Turpentine of both species consisted mainly of ..cap alpha..-pinene, ..beta..-pinene, and 3-carene. The composition of the turpentine from the Scotch pine lightwood did not differ from that of the control wood. However, turpentine from the Norway spruce lightwood had an increased 3-carene content compared to that from the control.« less

Topoclimatological and snowhydrological survey of Switzerland

NASA Technical Reports Server (NTRS)

Winiger, M. (Principal Investigator)

1979-01-01

The author has identified the following significant results. The chosen time of overflight of HCMM seems to be ideal for the study of basic climatological events. Nocturnal temperature inversion zones are easily detectable and their dependency on the relief is clearly seen. Especially the alpine valleys show a very differentiated pattern of cold lakes, separated by warmer zones as a consequence of rock and forrest barriers or changes in the valley profile. Wet areas are usually colder than dry parts under comparable topographic conditions. Even very small topographic obstacles are able to block up the flow of cold air masses (or ground water flow). Urban areas are clearly detectable. Differences to the surface temperatures of surrounding rural land are much more significant during day-time (mainly during the summer months). Fog layers are clearly defined in the visible channel (day-time), but much more difficult to identify in the IR (mainly during the night). There is not a fundamental difference to NOAA-analysis of cloud systems. The most important advantage is the better detectability of convective cloud systems (small cumulus clouds).

Experimental study of the novel tuned mass damper with inerter which enables changes of inertance

NASA Astrophysics Data System (ADS)

Brzeski, P.; Lazarek, M.; Perlikowski, P.

2017-09-01

In this paper we present the experimental verification of the novel tuned mass damper which enables changes of inertance. Characteristic feature of the proposed device is the presence of special type of inerter. This inerter incorporates a continuously variable transmission that enables stepless changes of inertance. Thus, it enables to adjust the parameters of the damping device to the current forcing characteristic. In the paper we present and describe the experimental rig that consists of the massive main oscillator forced kinematically and the prototype of the investigated damper. We perform a series of dedicated experiments to characterize the device and asses its damping efficiency. Moreover, we perform numerical simulations using the simple mathematical model of investigated system. Comparing the numerical results and the experimental data we legitimize the model and demonstrate the capabilities of the investigated tuned mass damper. Presented results prove that the concept of the novel type of tuned mass damper can be realized and enable to confirm its main advantages. Investigated prototype device offers excellent damping efficiency in a wide range of forcing frequencies.

Optimal Control Design Advantages Utilizing Two-Degree-of-Freedom Controllers

DTIC Science & Technology

1993-12-01

AFrTIGAE/ENYIV3D-27 AD--A273 839 D"TIC OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS THESIS Michael J. Stephens...AFIT/GAE/ENY/93D-27 OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS THESIS Presented to the Faculty of the Graduate...measurement noises compared to the I- DOF model. xvii OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS I. Introduction L1

Exercise programming and counseling preferences of breast cancer survivors during or after radiation therapy.

PubMed

Karvinen, Kristina H; Raedeke, Thomas D; Arastu, Hyder; Allison, Ron R

2011-09-01

To explore exercise programming and counseling preferences and exercise-related beliefs in breast cancer survivors during and after radiation therapy, and to compare differences based on treatment and insurance status. Cross-sectional survey. Ambulatory cancer center in a rural community in eastern North Carolina. 91 breast cancer survivors during or after radiation therapy. The researchers administered the questionnaire to participants. Exercise programming and counseling preferences and exercise beliefs moderated by treatment status (on-treatment, early, and late survivors) and insurance status (Medicaid, non-Medicaid). Chi-square analyses indicated that fewer Medicaid users were physically active and reported health benefits as an advantage of exercise compared to non-Medicaid users (p < 0.05). In addition, more Medicaid users preferred exercise programming at their cancer center compared to non-Medicaid users (p < 0.05). More on-treatment and early survivors listed health benefits as advantages to exercise, but fewer indicated weight control as an advantage compared to late survivors (p < 0.05). Early survivors were more likely than on-treatment survivors to indicate that accessible facilities would make exercising easier for them (p < 0.05). Medicaid users are less active, less likely to identify health benefits as an advantage for exercising, and more likely to prefer cancer center-based exercise programming compared to non-Medicaid users. In addition, on-treatment and early survivors are more likely to list health benefits and less likely to indicate weight control as advantages of exercising compared to late survivors. The low activity levels of Medicaid users may be best targeted by providing cancer center-based exercise programming. Exercise interventions may be most effective if tailored to the unique needs of treatment status.

Analysis of bacteria on steel surfaces using reflectance micro-Fourier transform infrared spectroscopy.

PubMed

Ojeda, Jesús J; Romero-González, María E; Banwart, Steven A

2009-08-01

Reflectance micro-Fourier transform infrared (FT-IR) analysis has been applied to characterize biofilm formation of Aquabacterium commune, a common microorganism present on drinking water distribution systems, onto the increasingly popular pipe material stainless steel EN1.4307. The applicability of the reflectance micro-FT-IR technique for analyzing the bacterial functional groups is discussed, and the results are compared to spectra obtained using more conventional FT-IR techniques: transmission micro-FT-IR, attenuated transmitted reflectance (ATR), and KBr pellets. The differences between the infrared spectra of wet and dried bacteria, as well as free versus attached bacteria, are also discussed. The spectra obtained using reflectance micro-FT-IR spectroscopy were comparable to those obtained using other FT-IR techniques. The absence of sample preparation, the potential to analyze intact samples, and the ability to characterize opaque and thick samples without the need to transfer the bacterial samples to an infrared transparent medium or produce a pure culture were the main advantages of reflectance micro-FT-IR spectroscopy.

Self-passivating bulk tungsten-based alloys manufactured by powder metallurgy

NASA Astrophysics Data System (ADS)

López-Ruiz, P.; Ordás, N.; Lindig, S.; Koch, F.; Iturriza, I.; García-Rosales, C.

2011-12-01

Self-passivating tungsten-based alloys are expected to provide a major safety advantage compared to pure tungsten, which is at present the main candidate material for the first wall armour of future fusion reactors. WC10Si10 alloys were manufactured by mechanical alloying (MA) in a Planetary mill and subsequent hot isostatic pressing (HIP), achieving densities above 95%. Different MA conditions were studied. After MA under optimized conditions, a core with heterogeneous microstructure was found in larger powder particles, resulting in the presence of some large W grains after HIP. Nevertheless, the obtained microstructure is significantly refined compared to previous work. First MA trials were also performed on the Si-free system WCr12Ti2.5. In this case a very homogeneous structure inside the powder particles was obtained, and a majority ternary metastable bcc phase was found, indicating that almost complete alloying occurred. Therefore, a very fine and homogeneous microstructure can be expected after HIP in future work.

Utilization of ground waste seashells in cement mortars for masonry and plastering.

PubMed

Lertwattanaruk, Pusit; Makul, Natt; Siripattarapravat, Chalothorn

2012-11-30

In this research, four types of waste seashells, including short-necked clam, green mussel, oyster, and cockle, were investigated experimentally to develop a cement product for masonry and plastering. The parameters studied included water demand, setting time, compressive strength, drying shrinkage and thermal conductivity of the mortars. These properties were compared with those of a control mortar that was made of a conventional Portland cement. The main parameter of this study was the proportion of ground seashells used as cement replacement (5%, 10%, 15%, or 20% by weight). Incorporation of ground seashells resulted in reduced water demand and extended setting times of the mortars, which are advantages for rendering and plastering in hot climates. All mortars containing ground seashells yielded adequate strength, less shrinkage with drying and lower thermal conductivity compared to the conventional cement. The results indicate that ground seashells can be applied as a cement replacement in mortar mixes and may improve the workability of rendering and plastering mortar. Copyright © 2012 Elsevier Ltd. All rights reserved.

On the calculation of the complex wavenumber of plane waves in rigid-walled low-Mach-number turbulent pipe flows

NASA Astrophysics Data System (ADS)

Weng, Chenyang; Boij, Susann; Hanifi, Ardeshir

2015-10-01

A numerical method for calculating the wavenumbers of axisymmetric plane waves in rigid-walled low-Mach-number turbulent flows is proposed, which is based on solving the linearized Navier-Stokes equations with an eddy-viscosity model. In addition, theoretical models for the wavenumbers are reviewed, and the main effects (the viscothermal effects, the mean flow convection and refraction effects, the turbulent absorption, and the moderate compressibility effects) which may influence the sound propagation are discussed. Compared to the theoretical models, the proposed numerical method has the advantage of potentially including more effects in the computed wavenumbers. The numerical results of the wavenumbers are compared with the reviewed theoretical models, as well as experimental data from the literature. It shows that the proposed numerical method can give satisfactory prediction of both the real part (phase shift) and the imaginary part (attenuation) of the measured wavenumbers, especially when the refraction effects or the turbulent absorption effects become important.

A Novel DEM Approach to Simulate Block Propagation on Forested Slopes

NASA Astrophysics Data System (ADS)

Toe, David; Bourrier, Franck; Dorren, Luuk; Berger, Frédéric

2018-03-01

In order to model rockfall on forested slopes, we developed a trajectory rockfall model based on the discrete element method (DEM). This model is able to take the complex mechanical processes at work during an impact into account (large deformations, complex contact conditions) and can explicitly simulate block/soil, block/tree contacts as well as contacts between neighbouring trees. In this paper, we describe the DEM model developed and we use it to assess the protective effect of different types of forest. In addition, we compared it with a more classical rockfall simulation model. The results highlight that forests can significantly reduce rockfall hazard and that the spatial structure of coppice forests has to be taken into account in rockfall simulations in order to avoid overestimating the protective role of these forest structures against rockfall hazard. In addition, the protective role of the forests is mainly influenced by the basal area. Finally, the advantages and limitations of the DEM model were compared with classical rockfall modelling approaches.

[Research progress on mutation by spaceflight in medicinal plants breeding].

PubMed

Yan, Shuo; Gao, Wenyuan; Lu, Fuping; Zhao, Runhuai

2010-02-01

Space breeding in medicinal plants is special characteristics in China. Compared with other plants, in spite of a relatively small number, Medicinal plants have more obvious characteristics and advantages. Research on medicinal plants has also been carried into all aspects, such as biological traits, physiology and biochemistry, genomics, as well as differences in chemical composition, and chemical composition analysis is also involved. However, compared with other plants, especially crops and vegetables, biological research is an obvious deficiency, that is mainly reflected in the insufficient genetics and breeding researches, the stability of genetic traits from generation to generation were not followed up and in-depth study in breeding areas was not carried out. If medicinal plants resources from space with the genetic stability good quality were selected, it would address the problem of lack of resources and ease the pressure on wild resources of medicinal plants. It would at the same time play an important role in promoting the development of medicinal botany space breeding and the implementation of modernization of traditional Chinese medicine.

Comparison between PRP, PRGF and PRF: lights and shadows in three similar but different protocols.

PubMed

Giannini, S; Cielo, A; Bonanome, L; Rastelli, C; Derla, C; Corpaci, F; Falisi, G

2015-01-01

The main goal of the modern surgery is to get a low invasiveness and a high rate of clinical healing: in the last years, it has been introduced the concept of a "regenerative surgery", and many techniques has been widely described in the literature. The most used are PRP, PRGF and PRF techniques. Aim of this research is to compare the three protocol of PRP, PRF and PRGF in their essential features, so to suggest to the practitioners the best blood product to use in the regenerative surgery. Among the advantages that shows the PRF, compared to PRP and PRGF, we can cite a greater simplicity of production for the absence of manipulation that leads to a reduced possibility of alteration of the protocol due to an error of the operator. The special texture of the PRF and its biological features shows clearly an interesting surgical versatility and all the characteristics that can support a faster tissues regeneration and high-quality clinical outcomes.

Mode-mismatched confocal thermal-lens microscope with collimated probe beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cabrera, Humberto, E-mail: hcabrera@ictp.it; Centro Multidisciplinartio de Ciencias, Instituto Venezolano de Investigaciones Científicas; Korte, Dorota

2015-05-15

We report a thermal lens microscope (TLM) based on an optimized mode-mismatched configuration. It takes advantage of the coaxial counter propagating tightly focused excitation and collimated probe beams, instead of both focused at the sample, as it is in currently known TLM setups. A simple mathematical model that takes into account the main features of the instrument is presented. The confocal detection scheme and the introduction of highly collimated probe beam allow enhancing the versatility, limit of detection (LOD), and sensitivity of the instrument. The theory is experimentally verified measuring ethanol’s absorption coefficient at 532.8 nm. Additionally, the presented techniquemore » is applied for detection of ultra-trace amounts of Cr(III) in liquid solution. The achieved LOD is 1.3 ppb, which represents 20-fold enhancement compared to transmission mode spectrometric techniques and a 7.5-fold improvement compared to previously reported methods for Cr(III) based on thermal lens effect.« less

The Treatment of Mid-shaft Clavicle Fractures

PubMed Central

Sang, Qing-Hua; Gou, Zhi-Gang; Zheng, Hua-Yong; Yuan, Jing-Tao; Zhao, Jian-Wen; He, Hong-Ying; Liu, Chuang; Liu, Zhi

2015-01-01

Objective: Through reviewing the relevant literature from the past decades, to summarize the assessment and management of fractures of the clavicle, and provide an overview of the clinical results of a range of treatment options. Data Sources: The data analyzed in this review are mainly from articles included in PubMed and EMBASE, published from 1960 to 2015. Study Selection: Studies involving assessment of fractures of the clavicle were reviewed. Further literatures were gathered regarding the conservative and surgical treatment of these fractures, including the methods of fixation and the surgical approaches used. Both conservative and surgical treatments were then compared and contrasted. Results: Through retrieving and reading the abstract, a total of 42 representative articles were selected, which covered all aspects of the conservative treatment and surgical treatment, and compared the advantages and disadvantages of different treatment options. Conclusions: Although the majority of recent data suggest that surgery may be more appropriate as it improves functional outcome and reduces the risk of complications, we recommend that the treatment should be individually assessed. PMID:26521795

Environmental aspects of the anaerobic digestion of the organic fraction of municipal solid wastes and of solid agricultural wastes.

PubMed

Edelmann, W; Baier, U; Engeli, H

2005-01-01

In order to obtain more detailed information for better decision making in future biogenic waste treatment, different processes to treat biogenic wastes in plants with a treatment capacity of 10,000 tons of organic household wastes per year as well as agricultural codigestion plants were compared by life cycle assessments (LCA). With the tool EcoIndicator, anaerobic digestion is shown to be advantageous as compared to composting, incineration or a combination of digestion and composting, mainly because of a better energy balance. The management of the liquid manure in agricultural codigestion of organic solid wastes causes increased gaseous emissions, which have negative effects on the LCA, however. It is recommended to cover the slurry pit and to use an improved manure management in order to compensate for the additional gaseous emissions. In the LCAs, the quality of the digester output could only be taken into account to a small extent; the reasons are discussed.

Saw-tooth refractive lens for high energy x-ray focusing

NASA Astrophysics Data System (ADS)

Antimonov, Mikhail A.; Khounsary, Ali M.

2014-09-01

Saw-tooth refractive lens (SRL) provides a comparatively attractive option for X-ray focusing. An SRL assembly consists of two parts, each with an array of triangular structures (prisms), set tilted symmetrically with respect to the incoming beam. Its main advantage is a simple, continuous tunability in energy and focal length. SRLs can be used for both long and short focal length focusing. Long focal distance focusing of an SRL can accurately be predicted using simple analytical relations. However, the focus size at short focal distances focusing may deviate appreciably from the expected demagnified source size when: (1) the length of the SRL is comparable with the focusing distance, (2) the incident beam is not monochromatic, and (3) and the distance between adjacent prism tips, the tip step, is large . The first factor was considered in a previous work while the other two are addressed is this paper. This preliminary work is aimed at a better understanding of the SRL lenses for focusing an undulator beamline at the Advanced Photon Source (APS).

Free vibration analysis of a robotic fish based on a continuous and non-uniform flexible backbone with distributed masses

NASA Astrophysics Data System (ADS)

Coral, W.; Rossi, C.; Curet, O. M.

2015-12-01

This paper presents a Differential Quadrature Element Method for free transverse vibration of a robotic fish based on a continuous and non-uniform flexible backbone with distributed masses (fish ribs). The proposed method is based on the theory of a Timoshenko cantilever beam. The effects of the masses (number, magnitude and position) on the value of natural frequencies are investigated. Governing equations, compatibility and boundary conditions are formulated according to the Differential Quadrature rules. The convergence, efficiency and accuracy are compared to other analytical solution proposed in the literature. Moreover, the proposed method has been validate against the physical prototype of a flexible fish backbone. The main advantages of this method, compared to the exact solutions available in the literature are twofold: first, smaller computational cost and second, it allows analysing the free vibration in beams whose section is an arbitrary function, which is normally difficult or even impossible with other analytical methods.

Multidimensional upwind hydrodynamics on unstructured meshes using graphics processing units - I. Two-dimensional uniform meshes

NASA Astrophysics Data System (ADS)

Paardekooper, S.-J.

2017-08-01

We present a new method for numerical hydrodynamics which uses a multidimensional generalization of the Roe solver and operates on an unstructured triangular mesh. The main advantage over traditional methods based on Riemann solvers, which commonly use one-dimensional flux estimates as building blocks for a multidimensional integration, is its inherently multidimensional nature, and as a consequence its ability to recognize multidimensional stationary states that are not hydrostatic. A second novelty is the focus on graphics processing units (GPUs). By tailoring the algorithms specifically to GPUs, we are able to get speedups of 100-250 compared to a desktop machine. We compare the multidimensional upwind scheme to a traditional, dimensionally split implementation of the Roe solver on several test problems, and we find that the new method significantly outperforms the Roe solver in almost all cases. This comes with increased computational costs per time-step, which makes the new method approximately a factor of 2 slower than a dimensionally split scheme acting on a structured grid.

Spiral magnetic order, non-uniform states and electron correlations in the conducting transition metal systems

NASA Astrophysics Data System (ADS)

Igoshev, P. A.; Timirgazin, M. A.; Arzhnikov, A. K.; Antipin, T. V.; Irkhin, V. Yu.

2017-10-01

The ground-state magnetic phase diagram is calculated within the Hubbard and s-d exchange (Kondo) models for square and simple cubic lattices vs. band filling and interaction parameter. The difference of the results owing to the presence of localized moments in the latter model is discussed. We employ a generalized Hartree-Fock approximation (HFA) to treat commensurate ferromagnetic (FM), antiferromagnetic (AFM), and incommensurate (spiral) magnetic phases. The electron correlations are taken into account within the Hubbard model by using the Kotliar-Ruckenstein slave boson approximation (SBA). The main advantage of this approach is a correct qualitative description of the paramagnetic phase: its energy becomes considerably lower as compared with HFA, and the gain in the energy of magnetic phases is substantially reduced.

Alternative divertor target concepts for next step fusion devices

NASA Astrophysics Data System (ADS)

Mazul, I. V.

2016-12-01

The operational conditions of a divertor target in the next steps of fusion devices are more severe in comparison with ITER. The current divertor designs and technologies have a limited application concerning these conditions, and so new design concepts/technologies are required. The main reasons which practically prevent the use of the traditional motionless solid divertor target are analyzed. We describe several alternative divertor target concepts in this paper. The comparative analysis of these concepts (including the advantages and the drawbacks) is made and the prospects for their practical implementation are prioritized. The concept of the swept divertor target with a liquid metal interlayer between the moving armour and motionless heat-sink is presented in more detail. The critical issues of this design are listed and outlined, and the possible experiments are presented.

Modernization of gas-turbine engines with high-frequency induction motors

NASA Astrophysics Data System (ADS)

Abramovich, B. N.; Sychev, Yu A.; Kuznetsov, P. A.

2018-03-01

Main tendencies of growth of electric energy consumption in general and mining industries were analyzed in the paper. A key role of electric drive in this process was designated. A review about advantages and disadvantages of unregulated gearboxes with mechanical units that are commonly used in domestically produced gas-turbine engines was made. This review allows one to propose different gas-turbine engines modernization schemes with the help of PWM-driven high-frequency induction motors. Induction motors with the double rotor winding were examined. A simulation of high-frequency induction motors with double rotor windings in Matlab-Simulink software was carried out based on equivalent circuit parameters. Obtained characteristics of new motors were compared with serially produced analogues. After the simulation, results were implemented in the real prototype.

Epoxy Monomers Cured by High Cellulosic Nanocrystal Loading.

PubMed

Khelifa, Farid; Habibi, Youssef; Bonnaud, Leila; Dubois, Philippe

2016-04-27

The present study focuses on the use of cellulose nanocrystals (CNC) as the main constituent of a nanocomposite material and takes advantage of hydroxyl groups, characteristic of the CNC chemical structure, to thermally cross-link an epoxy resin. An original and simple approach is proposed, based on the collective sticking of CNC building blocks with the help of a DGEBA/TGPAP-based epoxy resin. Scientific findings suggest that hydroxyl groups act as a toxic-free cross-linking agent of the resin. The enhanced protection against water degradation as compared to neat CNC film and the improvement of mechanical properties of the synthesized films are attributed to a good compatibility between the CNC and the resin. Moreover, the preservation of CNC optical properties at high concentrations opens the way to applying these materials in photonic devices.

Problems and prospects concerning the phytoremediation of heavy metal polluted soils: A review

NASA Astrophysics Data System (ADS)

Koptsik, G. N.

2014-09-01

The current state, problems, and prospects of phymoremediation of heavy metal polluted soils are analyzed. The main attention is paid to the phytoextraction and phytostabilization as the most widespread and alternative methods of soil phytoremediation. The efficiency of phymoremediation is related to the natural capability of plants for the accumulation and translocation of metals, their tolerance to a high content of metals, the plant biomass, and the amendments applied. The advantages and disadvantages of phytoremediation as compared to other methods of remediation of polluted soils in situ are considered. Examples of successful phytoextraction and phytomining for cleaning up of contaminated soils in Rasteburg (South Africa) and the phytostabilization of technogenic barrens nearby the copper-nickel plants in Sudbury (Ontario, Canada) and in the Kola Subarctic (Russia) are presented.

Performance and Selectivity of Ceramic Membranes in the Ultrafiltration of Model Emulsion in Saline

NASA Astrophysics Data System (ADS)

Ćwirko, Konrad; Kalbarczyk-Jedynak, Agnieszka

2017-06-01

Oily wastewaters from different onshore and offshore installations and from maritime transport pose a serious threat to the environment so they must be treated by multistage separation also including membrane processes. The main advantages of such membranes are high performance and selectivity, high resistance for temperature and pressure, resistance for acids, bases and solvents, long service life and for application - significant reduction of industries and transport environmental impact. This work presents the results of the process of separation of oil from the emulsion with NaCl addition. Research was performed with a use of laboratory installation with ceramic 300 kDa membrane. The analysis concerned performance and selectivity of a membrane in the function of time and test results have been subsequently compared with the requirements of the IMO.

Technological choices for mobile clinical applications.

PubMed

Ehrler, Frederic; Issom, David; Lovis, Christian

2011-01-01

The rise of cheaper and more powerful mobile devices make them a new and attractive platform for clinical applications. The interaction paradigm and portability of the device facilitates bedside human-machine interactions. The better accessibility to information and decision-support anywhere in the hospital improves the efficiency and the safety of care processes. In this study, we attempt to find out what are the most appropriate Operating System (OS) and Software Development Kit (SDK) to support the development of clinical applications on mobile devices. The Android platform is a Linux-based, open source platform that has many advantages. Two main SDKs are available on this platform: the native Android and the Adobe Flex SDK. Both of them have interesting features, but the latter has been preferred due its portability at comparable performance and ease of development.

Generation of transgene-free induced pluripotent stem cells with non-viral methods.

PubMed

Wang, Tao; Zhao, Hua-shan; Zhang, Qiu-ling; Xu, Chang-lin; Liu, Chang-bai

2013-03-01

Induced pluripotent stem (iPS) cells were originally generated from mouse fibroblasts by enforced expression of Yamanaka factors (Oct3/4, Sox2, Klf4, and c-Myc). The technique was quickly reproduced with human fibroblasts or mesenchymal stem cells. Although having been showed therapeutic potential in animal models of sickle cell anemia and Parkinson's disease, iPS cells generated by viral methods do not suit all the clinical applications. Various non-viral methods have appeared in recent years for application of iPS cells in cell transplantation therapy. These methods mainly include DNA vector-based approaches, transfection of mRNA, and transduction of reprogramming proteins. This review summarized these non-viral methods and compare the advantages, disadvantages, efficiency, and safety of these methods.

Transplanting Human Skin Grafts onto Nude Mice to Model Skin Scars.

PubMed

Ding, Jie; Tredget, Edward E

2017-01-01

Hypertrophic scar (HTS) is a common outcome of deep dermal wound healing mainly followed mechanical, chemical, and thermal injuries in the skin. Because of the lack of the most effective prevention and treatment, it is particularly important to establish an ideal dermal animal model for improving the understanding of the pathogenesis and exploring therapeutic approaches of HTS. Compared to other dermal fibrotic animal models in rabbits, red Duroc pigs, guinea pigs, rats, and mice, the approach that uses normal human split-thickness skin grafted onto nude or other immunodeficient mice which develop scars that resemble human HTS offers the advantages of lower cost, easier manipulation, and shorter research period. In this chapter, we will introduce the detailed procedures to create the ideal dermal fibrotic mouse model.

[CRISPR/Cas system for genome editing in pluripotent stem cells].

PubMed

Vasil'eva, E A; Melino, D; Barlev, N A

2015-01-01

Genome editing systems based on site-specific nucleases became very popular for genome editing in modern bioengineering. Human pluripotent stem cells provide a unique platform for genes function study, disease modeling, and drugs testing. Consequently, technology for fast, accurate and well controlled genome manipulation is required. CRISPR/Cas (clustered regularly interspaced short palindromic repeat/CRISPR-associated) system could be employed for these purposes. This system is based on site-specific programmable nuclease Cas9. Numerous advantages of the CRISPR/Cas system and its successful application to human stem cells provide wide opportunities for genome therapy and regeneration medicine. In this publication, we describe and compare the main genome editing systems based on site-specific programmable nucleases and discuss opportunities and perspectives of the CRISPR/Cas system for application to pluripotent stem cells.

A GPU-paralleled implementation of an enhanced face recognition algorithm

NASA Astrophysics Data System (ADS)

Chen, Hao; Liu, Xiyang; Shao, Shuai; Zan, Jiguo

2013-03-01

Face recognition algorithm based on compressed sensing and sparse representation is hotly argued in these years. The scheme of this algorithm increases recognition rate as well as anti-noise capability. However, the computational cost is expensive and has become a main restricting factor for real world applications. In this paper, we introduce a GPU-accelerated hybrid variant of face recognition algorithm named parallel face recognition algorithm (pFRA). We describe here how to carry out parallel optimization design to take full advantage of many-core structure of a GPU. The pFRA is tested and compared with several other implementations under different data sample size. Finally, Our pFRA, implemented with NVIDIA GPU and Computer Unified Device Architecture (CUDA) programming model, achieves a significant speedup over the traditional CPU implementations.

Development of silicon growth techniques from melt with surface heating

NASA Astrophysics Data System (ADS)

Kravtsov, Anatoly

2018-05-01

The paper contains literary and personal data on the development history of silicon-growing technology with volumetric and surface melt heating. It discusses the advantages and disadvantages of surface-heating technology. Examples are given of the implementation of such processes in the 60s-70s of the last century, and the reasons for the discontinuation of the relevant work. It describes the main solutions for the implementation of crystal growth process with the electron-beam heating of the melt surface, implemented by KEPP EU (Latvia). It discusses differences in the management of the growth process for the crystals with constant diameters compared to the Czochralski method. It lists geometrical and electro-physical properties of the obtained crystals. It describes the possible use of such crystals and the immediate challenges of technology development.

A fast infrared scanning technique for nondestructive testing

NASA Astrophysics Data System (ADS)

Hartikainen, Jari

1989-04-01

A simple and fast thermal NDT measurement system is described and its usefulness is demonstrated using a honeycomb structure as a test sample. The sample is heated with a hot air jet and the surface temperature differences due to subsurface defects are detected with a single HgCdTe detector. An image of the sample is formed by scanning over the sample surface with a deflection mirror in the y direction while moving the sample in the x direction. The measurement time is typically 6 s per image and several images are averaged to improve signal to noise ratio. The main advantages of this system compared to conventional infrared camera techniques are considerably reduced cost and the ease with which the system can be modified to various applications.

High refractive index Fresnel lens on a fiber fabricated by nanoimprint lithography for immersion applications.

PubMed

Koshelev, Alexander; Calafiore, Giuseppe; Piña-Hernandez, Carlos; Allen, Frances I; Dhuey, Scott; Sassolini, Simone; Wong, Edward; Lum, Paul; Munechika, Keiko; Cabrini, Stefano

2016-08-01

In this Letter, we present a Fresnel lens fabricated on the end of an optical fiber. The lens is fabricated using nanoimprint lithography of a functional high refractive index material, which is suitable for mass production. The main advantage of the presented Fresnel lens compared to a conventional fiber lens is its high refractive index (n=1.68), which enables efficient light focusing even inside other media, such as water or an adhesive. Measurement of the lens performance in an immersion liquid (n=1.51) shows a near diffraction limited focal spot of 810 nm in diameter at the 1/e² intensity level for a wavelength of 660 nm. Applications of such fiber lenses include integrated optics, optical trapping, and fiber probes.

Appetite for the selfish gene.

PubMed

Ostan, Iztok; Poljsak, Borut; Simcic, Marjan; Tijskens, L M M

2010-06-01

In developed countries, where the majority of the population has enough income to afford healthy diets, a large number of the inhabitants nevertheless choose unhealthy nutrition. WHO and FAO strategies to overcome this problem are mostly based on educational means. Implicitly, this approach is based on the presumption that the main causes of the problem are ignorance and culturally acquired bad habits. It has already been shown that wild animals, evidently acting solely on instinct without cultural effects, display tendencies that may damage their longevity: they tend to avoid healthy types of caloric restriction, prefer processed to raw food, and have an excessive intake of food stimulants and proteins when available (Ostan et al., 2009). This paper presents evidence for such nutritional patterns in humans as well and broadens the discourse to include proteins and fats and describes some human biological traits that present important differences between humans and other primates; among them are the human tendency for overeating and the inadequacy of a totally raw diet for human consumption (despite having some advantages for the human immune system). From an evolutionary perspective these strategies offer a biological advantage by enhancing the reproductive capability of the organisms, according to Dawkins' theory of the Selfish Gene. Genomic-based pleasure of such nutrition seems to be the main cause of instinctive nutritional drives. Further research on the process of food acceptance is needed to determine the role and importance of genomic-based pleasure compared to epigenetic or culture-based pleasure. Both, however, seem to be important and very stable factors in human nutritional choice and seem to prevail over conscious factors in food acceptance. Copyright 2010 Elsevier Ltd. All rights reserved.

A Microfluidic Localized, Multiple Cell Culture Array using Vacuum Actuated Cell Seeding: Integrated Anticancer Drug Testing

PubMed Central

Gao, Yan; Li, Peng

2013-01-01

In this study, we introduced a novel and convenient approach to culture multiple cells in localized arrays of microfluidic chambers using one-step vacuum actuation. In one device, we integrated 8 individually addressable regions of culture chambers, each only requiring one simple vacuum operation to seed cells lines. Four cell lines were seeded in designated regions in one device via sequential injection with high purity (99.9%-100%) and cultured for long-term. The on-chip simultaneous culture of HuT 78, Ramos, PC-3 and C166-GFP cells for 48 h was demonstrated with viabilities of 92%+/−2%, 94%+/−4%, 96%+/−2% and 97%+/−2%, respectively. The longest culture period for C166-GFP cells in this study was 168 h with a viability of 96%+/−10%. Cell proliferation in each individual side channel can be tracked. Mass transport between the main channel and side channels was achieved through diffusion and studied using fluorescein solution. The main advantage of this device is the capability to perform multiple cell-based assays on the same device for better comparative studies. After treating cells with staurosporine or anti-human CD95 for 16 h, the apoptotic cell percentage of HuT 78, CCRF-CEM, PC-3 and Ramos cells were 36%+/−3%, 24%+/−4%, 12%+/−2%, 18%+/−4% for staurosporine, and 63%+/−2%, 45%+/−1%, 3%+/−3%, 27%+/−12% for anti-human CD95, respectively. With the advantages of enhanced integration, ease of use and fabrication, and flexibility, this device will be suitable for long-term multiple cell monitoring and cell based assays. PMID:23813077

Evaluation of redundancy analysis to identify signatures of local adaptation.

PubMed

Capblancq, Thibaut; Luu, Keurcien; Blum, Michael G B; Bazin, Eric

2018-05-26

Ordination is a common tool in ecology that aims at representing complex biological information in a reduced space. In landscape genetics, ordination methods such as principal component analysis (PCA) have been used to detect adaptive variation based on genomic data. Taking advantage of environmental data in addition to genotype data, redundancy analysis (RDA) is another ordination approach that is useful to detect adaptive variation. This paper aims at proposing a test statistic based on RDA to search for loci under selection. We compare redundancy analysis to pcadapt, which is a nonconstrained ordination method, and to a latent factor mixed model (LFMM), which is a univariate genotype-environment association method. Individual-based simulations identify evolutionary scenarios where RDA genome scans have a greater statistical power than genome scans based on PCA. By constraining the analysis with environmental variables, RDA performs better than PCA in identifying adaptive variation when selection gradients are weakly correlated with population structure. Additionally, we show that if RDA and LFMM have a similar power to identify genetic markers associated with environmental variables, the RDA-based procedure has the advantage to identify the main selective gradients as a combination of environmental variables. To give a concrete illustration of RDA in population genomics, we apply this method to the detection of outliers and selective gradients on an SNP data set of Populus trichocarpa (Geraldes et al., 2013). The RDA-based approach identifies the main selective gradient contrasting southern and coastal populations to northern and continental populations in the northwestern American coast. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Structure Design Approach and Technology Selection for Next Generation European Launchers

NASA Astrophysics Data System (ADS)

Baiocco, P.; Ramusat, G.; Kauffmann, J.; Jaredson, D.; Bouilly, Th.; Lavelle, F.; Louaas, E.

2012-07-01

In the framework of the next generation launchers activity at ESA, a top-down and a bottom-up approach has been performed for the alternative conception and promising technologies of NGL sub-assemblies and sub-systems. The top-down approach consisted in looking for system-driven design solutions and the bottom-up in the proposal of design solutions taking to substantial advantages for the system. The main investigations have been focused on structures and technologies tight to structures and interfaces. Specifications coming from a preliminary system design have been used in order to permit sub-system design with the goal to find the major advantage for the overall launch system. In this respect selection criteria have been identified and among these a specific evaluation of the payload mass over recurring cost advantage has been evaluated. The development cost, recurring cost and operational aspects have been considered as competitiveness factors for the identification of the most interesting solutions. The TRL/IRL has been assessed and a preliminary development plan has been identified. This approach is dedicated to reference NGL architectures, but alternative architectures have been investigated in order to assess their interest in terms of competitiveness factors and study of other technologies. This paper deals mainly with metallic and composite structures owing to sub-systems or sub-assemblies proposed for the NGL. The major sub-systems and structures analysed are the engine thrust frame (ETF), inter stage structures (ISS), cryogenic propellant tanks, feeding lines and attachments, pressurisation systems and fairing. The paper provides an overview of the main results of this investigation and the potential benefit it can provide.

An analysis of the implementation of an environmental management system in a local public administration.

PubMed

Lozano, Macarena; Vallés, José

2007-03-01

The Environmental Management System (EMS) is commonly implemented in private firms. However, on the basis of a strengths, weaknesses, opportunities and threats (SWOT) analysis, our work analyzes the consequences of implementing an EMS within the context of local public administrations, particularly regarding the City Council of Ohanes in Almería (Spain). This is the first European corporation to implement an EMS according to the ISO 14001 Standard, certified by the Spanish Association of Normalization and Certification. Its analysis would be equivalent to the Shumpeterian "market innovator study", so that public administration "followers" can take advantage of the derived benefits and of minimizing the negative effects of such an experience. On the other hand, we show that the economic and environmental advantages derived from the EMS go beyond the activities that the City Council is in charge of. They have spillover effects that extend them to all economic activities in the municipality and these effects are expected to be increased in the medium and long-term perspective. In this paper, we compare the costs and benefits that the municipality obtains in two cases: the City Council implements the EMS or it does not implement it. The main objective of this article is to show the economic and environmental advantages obtained by a municipality when it is only the City Council who is implementing an EMS. It is logical to suppose that this case study can stimulate other municipalities to use this instrument, even if the economic and environmental characteristics of the municipality are different.

Open access publishing, article downloads, and citations: randomised controlled trial

PubMed Central

Lewenstein, Bruce V; Simon, Daniel H; Booth, James G; Connolly, Mathew J L

2008-01-01

Objective To measure the effect of free access to the scientific literature on article downloads and citations. Design Randomised controlled trial. Setting 11 journals published by the American Physiological Society. Participants 1619 research articles and reviews. Main outcome measures Article readership (measured as downloads of full text, PDFs, and abstracts) and number of unique visitors (internet protocol addresses). Citations to articles were gathered from the Institute for Scientific Information after one year. Interventions Random assignment on online publication of articles published in 11 scientific journals to open access (treatment) or subscription access (control). Results Articles assigned to open access were associated with 89% more full text downloads (95% confidence interval 76% to 103%), 42% more PDF downloads (32% to 52%), and 23% more unique visitors (16% to 30%), but 24% fewer abstract downloads (−29% to −19%) than subscription access articles in the first six months after publication. Open access articles were no more likely to be cited than subscription access articles in the first year after publication. Fifty nine per cent of open access articles (146 of 247) were cited nine to 12 months after publication compared with 63% (859 of 1372) of subscription access articles. Logistic and negative binomial regression analysis of article citation counts confirmed no citation advantage for open access articles. Conclusions Open access publishing may reach more readers than subscription access publishing. No evidence was found of a citation advantage for open access articles in the first year after publication. The citation advantage from open access reported widely in the literature may be an artefact of other causes. PMID:18669565

Using High-Altitude Pseudo Satellites as an innovative technology platform for climate measurements

NASA Astrophysics Data System (ADS)

Coulon, A.; Johnson, S.

2017-12-01

Climate scientists have been using for decades either remotely observed data, mainly from (un)manned aircraft and satellites, or ground-based measurements. High-Altitude Pseudo Satellites (HAPS) are emerging as a disruptive technology that will be used for various "Near Space" applications at altitudes between 15 and 23 km (i.e. above commercial airlines). This new generation of electric solar-powered unmanned aerial vehicles flying in the stratosphere aim to persistently monitor regional areas (with high temporal, spatial and spectral resolution) as well as perform in-situ Near Space observations. The two case studies presented will highlight the advantages of using such an innovative platform. First, calculations were performed to compare the use of a constellation of Low Earth Orbit satellites and a fleet of HAPS for surface monitoring. Using stratospheric drones has a clear advantage for revisiting a large zone (10'000km2 per day) with higher predictability and accuracy. User is free to set time over a location, avoid cloud coverage and obtain Ground Sampling Distance of 30cm using commercially of the shelf sensors. The other impact study focuses on in-situ measurements. Using HAPS will indeed help to closely observe stratospheric compounds, such as aerosols or volcano plumes. Simulations were performed to show how such a drone could collect samples and provide high-accuracy evaluations of compounds that, so far, are only remotely observed. The performed impact studies emphasize the substantial advantages of using HAPS for future stratospheric campaigns. Deploying month-long unmanned missions for monitoring stratospheric aerosols will be beneficial for future research projects such as climate engineering.

Asymmetry of temporal auditory T-complex: right ear-left hemisphere advantage in Tb timing in children.

PubMed

Bruneau, Nicole; Bidet-Caulet, Aurélie; Roux, Sylvie; Bonnet-Brilhault, Frédérique; Gomot, Marie

2015-02-01

To investigate brain asymmetry of the temporal auditory evoked potentials (T-complex) in response to monaural stimulation in children compared to adults. Ten children (7 to 9 years) and ten young adults participated in the study. All were right-handed. The auditory stimuli used were tones (1100 Hz, 70 dB SPL, 50 ms duration) delivered monaurally (right, left ear) at four different levels of stimulus onset asynchrony (700-1100-1500-3000 ms). Latency and amplitude of responses were measured at left and right temporal sites according to the ear stimulated. Peaks of the three successive deflections (Na-Ta-Tb) of the T-complex were greater in amplitude and better defined in children than in adults. Amplitude measurements in children indicated that Na culminates on the left hemisphere whatever the ear stimulated whereas Ta and Tb culminate on the right hemisphere but for left ear stimuli only. Peak latency displayed different patterns of asymmetry. Na and Ta displayed shorter latencies for contralateral stimulation. The original finding was that Tb peak latency was the shortest at the left temporal site for right ear stimulation in children. Amplitude increased and/or peak latency decreased with increasing SOA, however no interaction effect was found with recording site or with ear stimulated. Our main original result indicates a right ear-left hemisphere timing advantage for Tb peak in children. The Tb peak would therefore be a good candidate as an electrophysiological marker of ear advantage effects during dichotic stimulation and of functional inter-hemisphere interactions and connectivity in children. Copyright © 2014. Published by Elsevier B.V.

Interpreting the possible ecological role(s) of cyanotoxins: compounds for competitive advantage and/or physiological aide?

PubMed

Holland, Aleicia; Kinnear, Susan

2013-06-27

To date, most research on freshwater cyanotoxin(s) has focused on understanding the dynamics of toxin production and decomposition, as well as evaluating the environmental conditions that trigger toxin production, all with the objective of informing management strategies and options for risk reduction. Comparatively few research studies have considered how this information can be used to understand the broader ecological role of cyanotoxin(s), and the possible applications of this knowledge to the management of toxic blooms. This paper explores the ecological, toxicological, and genetic evidence for cyanotoxin production in natural environments. The possible evolutionary advantages of toxin production are grouped into two main themes: That of "competitive advantage" or "physiological aide". The first grouping illustrates how compounds produced by cyanobacteria may have originated from the need for a cellular defence mechanism, in response to grazing pressure and/or resource competition. The second grouping considers the contribution that secondary metabolites make to improved cellular physiology, through benefits to homeostasis, photosynthetic efficiencies, and accelerated growth rates. The discussion also includes other factors in the debate about possible evolutionary roles for toxins, such as different modes of exposures and effects on non-target (i.e., non-competitive) species. The paper demonstrates that complex and multiple factors are at play in driving evolutionary processes in aquatic environments. This information may provide a fresh perspective on managing toxic blooms, including the need to use a "systems approach" to understand how physico-chemical conditions, as well biological stressors, interact to trigger toxin production.

Robotic Colorectal Surgery

PubMed Central

2008-01-01

Robotic colorectal surgery has gradually been performed more with the help of the technological advantages of the da Vinci® system. Advanced technological advantages of the da Vinci® system compared with standard laparoscopic colorectal surgery have been reported. These are a stable camera platform, three-dimensional imaging, excellent ergonomics, tremor elimination, ambidextrous capability, motion scaling, and instruments with multiple degrees of freedom. However, despite these technological advantages, most studies did not report the clinical advantages of robotic colorectal surgery compared to standard laparoscopic colorectal surgery. Only one study recently implies the real benefits of robotic rectal cancer surgery. The purpose of this review article is to outline the early concerns of robotic colorectal surgery using the da Vinci® system, to present early clinical outcomes from the most current series, and to discuss not only the safety and the feasibility but also the real benefits of robotic colorectal surgery. Moreover, this article will comment on the possible future clinical advantages and limitations of the da Vinci® system in robotic colorectal surgery. PMID:19108010

Public Lecture

ScienceCinema

None

2017-12-09

An outreach activity is being organized by the Turkish community at CERN, on 5 June 2010 at CERN Main Auditorium. The activity consists of several talks that will take 1.5h in total. The main goal of the activity will be describing the CERN based activities and experiments as well as stimulating the public's attention to the science related topics. We believe the wide communication of the event has certain advantages especially for the proceeding membership process of Turkey.

Microdebrider-assisted uvulopalatoplasty.

PubMed

Tarabichi, M

1998-07-01

This report describes 3 years' experience with the microdebrider as a safe and reasonable alternative to CO2 laser for uvulopalatoplasty. The cost and compact size of the equipment, as well as the ease of surgery, are the main advantages for microdebrider-assisted surgery.

Comparative Analysis of OECD Member Countries' Competitive Advantage in National Human Resource Development System

ERIC Educational Resources Information Center

Oh, Hunseok; Choi, Yeseul; Choi, Myungweon

2013-01-01

The purpose of this study was to assess, evaluate, and compare the competitive advantages of the human resource development systems of advanced countries. The Global Human Resource Development Index was utilized for this study, since it has been validated through an expert panel's content review and analytic hierarchy process. Using a sample of 34…

Utilizing Free and Open Source Software to access, view and compare in situ observations, EO products and model output data

NASA Astrophysics Data System (ADS)

Vines, Aleksander; Hamre, Torill; Lygre, Kjetil

2014-05-01

The GreenSeas project (Development of global plankton data base and model system for eco-climate early warning) aims to advance the knowledge and predictive capacities of how marine ecosystems will respond to global change. A main task has been to set up a data delivery and monitoring core service following the open and free data access policy implemented in the Global Monitoring for the Environment and Security (GMES) programme. The aim is to ensure open and free access to historical plankton data, new data (EO products and in situ measurements), model data (including estimates of simulation error) and biological, environmental and climatic indicators to a range of stakeholders, such as scientists, policy makers and environmental managers. To this end, we have developed a geo-spatial database of both historical and new in situ physical, biological and chemical parameters for the Southern Ocean, Atlantic, Nordic Seas and the Arctic, and organized related satellite-derived quantities and model forecasts in a joint geo-spatial repository. For easy access to these data, we have implemented a web-based GIS (Geographical Information Systems) where observed, derived and forcasted parameters can be searched, displayed, compared and exported. Model forecasts can also be uploaded dynamically to the system, to allow modelers to quickly compare their results with available in situ and satellite observations. We have implemented the web-based GIS(Geographical Information Systems) system based on free and open source technologies: Thredds Data Server, ncWMS, GeoServer, OpenLayers, PostGIS, Liferay, Apache Tomcat, PRTree, NetCDF-Java, json-simple, Geotoolkit, Highcharts, GeoExt, MapFish, FileSaver, jQuery, jstree and qUnit. We also wanted to used open standards to communicate between the different services and we use WMS, WFS, netCDF, GML, OPeNDAP, JSON, and SLD. The main advantage we got from using FOSS was that we did not have to invent the wheel all over again, but could use already existing code and functionalities on our software for free: Of course most the software did not have to be open source for this, but in some cases we had to do minor modifications to make the different technologies work together. We could extract the parts of the code that we needed for a specific task. One example of this was to use part of the code from ncWMS and Thredds to help our main application to both read netCDF files and present them in the browser. This presentation will focus on both difficulties we had with and advantages we got from developing this tool with FOSS.

A patient post hoc perspective on advantages and disadvantages of blended cognitive behaviour therapy for depression: A qualitative content analysis.

PubMed

Urech, Antoine; Krieger, Tobias; Möseneder, Laura; Biaggi, Adriana; Vincent, Alessia; Poppe, Christine; Meyer, Björn; Riper, Heleen; Berger, Thomas

2018-01-31

Blended cognitive behavioural therapy (bCBT), which combines face-to-face (FtF), and internet-based cognitive behavioural therapy (iCBT), may be a particularly promising approach, but little is known about the effectiveness and patients' subjective evaluations of the bCBT format. The aim of this qualitative study is to explore perceived advantages and disadvantages of bCBT from the patients' perspective in specialized mental health care. Semi-structured interviews were conducted with 15 patients suffering from major depression who underwent treatment in a bCBT format. The interview data were processed by means of a qualitative content analysis. The content analysis generated 18 advantages and 15 disadvantages which were grouped into 6 main topics. In general, bCBT was perceived as purposive and effective for treating depression. The patients perceived the combined treatment as complementary and emphasized the advantage of the constant availability of the online programme. Furthermore, a segment analysis revealed that patients reported different advantages and disadvantages of bCBT as a function of the severity of their depressive episode. The findings of the present study reveal advantages and disadvantages of bCBT, which should be taken into account in the further implementation of this new treatment format.

Memory for emotional words: The role of semantic relatedness, encoding task and affective valence.

PubMed

Ferré, Pilar; Fraga, Isabel; Comesaña, Montserrat; Sánchez-Casas, Rosa

2015-01-01

Emotional stimuli have been repeatedly demonstrated to be better remembered than neutral ones. The aim of the present study was to test whether this advantage in memory is mainly produced by the affective content of the stimuli or it can be rather accounted for by factors such as semantic relatedness or type of encoding task. The valence of the stimuli (positive, negative and neutral words that could be either semantically related or unrelated) as well as the type of encoding task (focused on either familiarity or emotionality) was manipulated. The results revealed an advantage in memory for emotional words (either positive or negative) regardless of semantic relatedness. Importantly, this advantage was modulated by the encoding task, as it was reliable only in the task which focused on emotionality. These findings suggest that congruity with the dimension attended at encoding might contribute to the superiority in memory for emotional words, thus offering us a more complex picture of the underlying mechanisms behind the advantage for emotional information in memory.

Digital printing

NASA Astrophysics Data System (ADS)

Sobotka, Werner K.

1997-02-01

Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

Electrophysiological Explorations of the Bilingual Advantage: Evidence from a Stroop Task

PubMed Central

Coderre, Emily L.; van Heuven, Walter J. B.

2014-01-01

Bilinguals have been shown to exhibit a performance advantage on executive control tasks, outperforming their monolingual counterparts. Although a wealth of research has investigated this ‘bilingual advantage’ behaviourally, electrophysiological correlates are lacking. Using EEG with a Stroop task that manipulated the stimulus onset asynchrony (SOA) of word and colour presentation, the current study addressed two facets of the bilingual advantage. The possibility that bilinguals experience superior conflict processing relative to monolinguals (a ‘conflict-specific advantage’) was investigated by comparing behavioural interference effects as well as the amplitude of the Ninc, a conflict-related ERP component occurring from approximately 300–500 ms after the onset of conflict. In contrast, the hypothesis that bilinguals experience domain-general, conflict-independent enhancements in executive processing (a ‘non-conflict-specific advantage’) was evaluated by comparing the control condition (symbol strings) between groups. There was some significant, but inconsistent, evidence for a conflict-specific bilingual advantage. In contrast, strong evidence emerged for a non-conflict-specific advantage, with bilinguals demonstrating faster RTs and reduced ERP amplitudes on control trials compared to monolinguals. Importantly, when the control stimulus was presented before the colour, ERPs to control trials revealed group differences before the onset of conflict, suggesting differences in the ability to ignore or suppress distracting irrelevant information. This indicates that bilinguals experience superior executive processing even in the absence of conflict and semantic salience, and suggests that the advantage extends to more efficient proactive management of the environment. PMID:25068723

Developing a Fleet Standardization Index for Airline Planning

NASA Technical Reports Server (NTRS)

deBorgesPan, Alexis George; EspiritoSanto, Respicio A., Jr.

2003-01-01

Quantifying subjective aspects is a difficult task that requires a great dedication of time from researchers and analysts. Nevertheless, one of the main objectives of it is to pave the way for a better understanding of the focused aspects. Fleet standardization is one of these subjective aspects that is extremely difficult to mm into numbers. Although, it is of great importance to know the benefits that may come with a higher level of standardization for airlines, which may be economical advantages, maintenance facilitation and others. A more standardized fleet may represent lower costs of operations and maintenance facilitation and others. A more standardized fleet may represent lower costs of operations and maintenance plus a much better planning of routes and flights. This study presents the first step on developing an index, hereto called "Fleet Standardization Index" or FSI (or IPF in Portuguese, for "Indice de Padronizacao de Frotas"), that will allow senior airline planners to compare different fleets and also simulate some results from maintaining or renewing their fleets. Although being a preliminary study, the results obtained may already be tested to compare different fleets (different airlines) and also analyze some possible impacts of a fleet renewal before it takes place. Therefore, the main objective of this paper is to introduce the proposed IPF index and to demonstrate that it is inversely proportional to the number of different airplane models, engines and other equipment, such as avionics.

Use of Autologous Scleral Graft in Ahmed Glaucoma Valve Surgery.

PubMed

Wolf, Alvit; Hod, Yair; Buckman, Gila; Stein, Nili; Geyer, Orna

2016-04-01

To compare the efficacy of an autoscleral free-flap graft versus an autoscleral rotational flap graft in Ahmed glaucoma valve (AGV) surgery. Medical records (2005 to 2012) of 51 consecutive patients (51 eyes) who underwent AGV surgery with the use of either an autoscleral free-flap graft or an autoscleral rotational flap graft to cover the external tube at the limbus were retrieved for review. The main outcome measure was the incidence of tube exposure associated with each surgical approach. Twenty-seven consecutive patients (27 eyes) received a free-flap graft and 24 consecutive patients (24 eyes) received a rotational flap graft. The mean follow-up time was 55.6 ± 18.3 months for the former and 24.2± 5 .0 months for the latter (P<0.0001). Two patients in the free-flap group (8.9%) developed tube exposure at 24 and 55 months postoperatively compared with none of the patients in the rotational flap group. Graft thinning without evidence of conjunctival erosion was observed in 15 patients (55%) in the free-flap group and in 7 patients (29.1%) in the rotational flap group. The use of an autoscleral rotational flap graft is an efficacious technique for primary tube patch grafting in routine AGV surgery, and yielded better results than an autoscleral free-flap graft. Its main advantages over donor graft material are availability and lower cost.

Analysis of hydrodynamic losses for various types of aortic valves

NASA Astrophysics Data System (ADS)

Starobin, I. M.; Lupachev, S. P.; Dolgopolov, R. V.; Zaiko, V. M.; Kas'yanov, V. A.; Mungalov, D. D.; Morov, G. V.

1985-05-01

The creation of an automated computer-controlled hydraulic stand made it possible to measure the main hydrodynamic parameters of the flow through the investigated HVP and to determine the coefficients of Eq. (2) of fluid flow in the test chamber of the stand. The coefficients found can serve as a criterion of a comparative assessment of the hydrodynamics of HVPs. An analysis of the coefficients showed that the main contribution to pressure losses across ball and disc valves is made by viscous and convective effects. An analysis of inertial losses confirmed the presence of oscillations of the ball closing elements of the AKCh-3-06 valve around the props of the stroke limiters and made it possible to assess them quantitatively. For leaflet valves the contribution of inertial losses to the total pressure losses is more considerable than in the case of disc and ball valves both in the regime of an increase of power of the output and in the regime of a constant power. The mechanical properties of the material of leaflet valves have an effect on the hydrodynamic characteristics. The advantage of the investigated leaflet valves consists not only in that they have smaller total hydraulic losses compared with the other valves, but also in that they provide a high amplitude of pulsations of the blood stream in the case of insufficient contractility of the heart.

Roller compaction of hydrophilic extended release tablets-combined effects of processing variables and drug/matrix former particle size.

PubMed

Heiman, Johanna; Tajarobi, Farhad; Gururajan, Bindhumadhavan; Juppo, Anne; Abrahmsén-Alami, Susanna

2015-04-01

The present study shows that roller compaction (RC) can successfully be used as a granulation method to prepare hydroxypropyl methylcellulose (HPMC)-based extended release matrix tablets containing a high drug load, both for materials deforming mainly by fragmentation (paracetamol) as for those having mainly plastic deformation (ibuprofen). The combined effect of RC process variables and composition on the manufacturability of HPMC tablets was investigated. Standard wet granulation grade HPMC was compared with a larger particle size direct compressible HPMC grade. Higher roll pressure was found to result in larger paracetamol granules and narrower granule particle size distributions, especially for formulations containing smaller size HPMC. However, for ibuprofen, no clear effect of roll pressure was observed. High roll pressure also resulted in denser ribbon and less bypass fines during RC. Loss of compactibility was observed for granules compared to powder blends, which was found to be related to differences in granule porosity and morphology. Using the large-sized HPMC grade did in some cases result in lower tensile strength tablets but had the advantage to improve the powder flow into the roller compactor. This work also indicates that when the HPMC level lies near the percolation threshold, significant changes can occur in the drug release rate due to changes in other factors (raw material characteristics and processing).

Advantageous Inequity Aversion Does Not Always Exist: The Role of Determining Allocations Modulates Preferences for Advantageous Inequity.

PubMed

Li, Ou; Xu, Fuming; Wang, Lei

2018-01-01

Previous studies have shown that people would like to sacrifice benefits to themselves in order to avoid inequitable outcomes, not only when they receive less than others (disadvantageous inequity aversion) but also when they receive more (advantageous inequity aversion). This feature is captured by the theory of inequity aversion. The present study was inspired by what appears to be asymmetry in the research paradigm toward advantageous inequity aversion. Specifically, studies that supported the existence of advantageous inequity aversion always relied on the paradigm in which participants can determine allocations. Thus, it is interesting to know what would occur if participants could not determine allocations or simply passed judgment on predetermined allocations. To address this, a behavioral experiment ( N = 118) and a skin conductance response (SCR) experiment ( N = 29) were adopted to compare participants' preferences for advantageous inequity directly when allocations were determined and when allocations were predetermined in an allocating task. In the determined condition, participants could divide by themselves a sum of money between themselves and a matched person, whereas in the predetermined condition, they could simply indicate their satisfaction with an equivalent program-generated allocation. It was found that, compared with those in the determined condition, participants in the predetermined condition behaved as if they liked the advantageous inequity and equity to the same degree (Experiment One) and that the SCRs elicited by advantageous inequity had no differences from those elicited by equity, suggesting that participants did not feel negatively toward advantageous inequity in this situation (Experiment Two). The present study provided mutual corroboration (behavioral and electrophysiological data) to document that advantageous inequity aversion may differ as a function of the individual's role in determining allocations, and it would disappear if individual cannot determine allocations.

Comparing the Efficacy of CBASP with Two Versions of CBT for Depression in a Routine Care Center: A Randomized Clinical Trial.

PubMed

Rief, Winfried; Bleichhardt, Gabi; Dannehl, Katharina; Euteneuer, Frank; Wambach, Katrin

2018-04-12

The cognitive-behavioral analysis system of psychotherapy (CBASP) was developed for the treatment of chronic, early-onset depression. However, it is unclear whether this approach can be recommended for depression in general (episodic and chronic), and no direct comparisons between CBASP with different versions of cognitive-behavioral therapy (CBT) exist. A randomized controlled trial compared 3 treatment conditions (all lasting 16 sessions) with a waiting list group (WL): CBASP, CBT with a focus on physical exercise (CBT-E), and CBT with a focus on pleasurable, low-energy and mindful activities (CBT-M). We included 173 patients and involved 41 therapists. Assessments were at baseline, after session 8, and at the end of treatment. Our primary outcome Beck Depression Inventory-II indicated a general advantage of the CBT arms compared to CBASP [F(6, 154.5) = 4.2, p = 0.001], with significant contrasts in particular in favor of CBT-E. Effect sizes against WL were d = 0.91 (CBT-E), 0.87 (CBT-M), and 0.47 (CBASP). A triple interaction with an additional factor "chronic versus episodic depression" [F(6, 142.7) = 2.2, p = 0.048] indicated that the treatments resulted in different outcomes, with best results again for CBT-E in particular in episodic depression. Responder rates indicated significant improvements (56% in both CBT arms, 34% in the CBASP arm, 3.4% in WL; intention-to-treat samples). As compared to CBASP, response rates were significantly higher for CBT-E (OR = 2.48; 95% CI = 1.02-6.00) and CBT-M (OR = 2.46; 95% CI = 1.01-6.01). CBASP was more effective than WL, but less effective than the 2 CBT arms. This was mainly caused by an advantage of CBT interventions in episodic depression. © 2018 S. Karger AG, Basel.

On the Gender Effects of Handedness in Professional Tennis

PubMed Central

Breznik, Kristijan

2013-01-01

The aim of this study was to explore the effects of the gender variable in relation to other player and match characteristics on the advantage possessed by left-handed professional tennis players over their right-handed rivals. The data include 16 732 male tennis players and 16 432 female tennis players who played 438 937 and 415 346 matches, respectively, in the period from 1968 to the end of 2011. The results revealed that the advantage of left-handed professional tennis players is higher in males compared to females. The inverse impact of player and match quality on the left- handers’ advantage was clearly confirmed. On the contrary, it seems that the type of court surface does not directly imply this advantage. To obtain an overview on the individual level, directed and weighted networks of tennis matches in both gender categories were constructed. Applying network analytic methods and the PageRank algorithm, the best left and right-handed players in the Open Era of tennis were identified. The top three ranked left-handed players in the male and female categories were found to be far more consistent in their ranks achieved against left and right-handed opponents compared to their right-handed counterparts. Key Points The advantage of left-handed professional tennis players over their right-handed opponents is higher in males compared to females. The quality of player and match is inversely proportional to the advantage of left-handers against their right-handed counterparts. On the contrary, it seems that the type of court surface does not directly imply this advantage. When the tennis talent appears in left-handers it is likely to be an outstanding one, particularly in the female category. PMID:24149815

BACLAB: A Computer Simulation of a Medical Bacteriology Laboratory--An Aid for Teaching Tertiary Level Microbiology.

ERIC Educational Resources Information Center

Lewington, J.; And Others

1985-01-01

Describes a computer simulation program which helps students learn the main biochemical tests and profiles for identifying medically important bacteria. Also discusses the advantages and applications of this type of approach. (ML)

Effects of Wheel-Load Spatial Repeatability on Road Damage : A Literature Review

DOT National Transportation Integrated Search

1998-09-01

Concerns about growing governmental budgetary deficits and the awareness of the economic advantages associated with a safe and well-maintained road infrastructure are two of the main reasons for devoting attention to better understanding the problem ...

Fan Noise Control Using Herschel-Quincke Resonators

NASA Astrophysics Data System (ADS)

Burdisso, Ricardo A.; Ng, Wing F.

2003-01-01

The research effort proposed for this NASA NRA is mainly experimental. In addition, Virginia Tech is working in partnership with Goodrich Aerospace, Aerostructures Group for the analytical development needed to support the experimental endeavor, i.e. model development, design, and system studies. In this project, Herschel-Quincke (HQ)liner technology experiments will be performed at the NASA Glenn Active Noise Control Fan (ANCF) facility. A schematic of both inlet and aft HQ-liner systems installed in the ANCF rig as well as a picture of the Glenn facility is shown. The main goal is to simultaneously test in both the inlet and bypass duct sections. The by-pass duct will have HQ-systems in both the inner and outer duct walls. The main advantages of performing tests at the ANCF facility are that the effect of the inlet HQ-system on the by-pass HQ-system and vice versa, can be accurately determined from the in-duct modal data. Another significant advantage is that it offers the opportunity to assess (on a common basis) the proposed noise reduction concept on the ANCF rig which in the past has been used for assessing other active and passive noise reduction strategies.

Investing in children: changes in parental spending on children, 1972-2007.

PubMed

Kornrich, Sabino; Furstenberg, Frank

2013-02-01

Parental spending on children is often presumed to be one of the main ways that parents invest in children and a main reason why children from wealthier households are advantaged. Yet, although research has tracked changes in the other main form of parental investment-namely, time-there is little research on spending. We use data from the Consumer Expenditure Survey to examine how spending changed from the early 1970s to the late 2000s, focusing particularly on inequality in parental investment in children. Parental spending increased, as did inequality of investment. We also investigate shifts in the composition of spending and linkages to children's characteristics. Investment in male and female children changed substantially: households with only female children spent significantly less than parents in households with only male children in the early 1970s; but by the 1990s, spending had equalized; and by the late 2000s, girls appeared to enjoy an advantage. Finally, the shape of parental investment over the course of children's lives changed. Prior to the 1990s, parents spent most on children in their teen years. After the 1990s, however, spending was greatest when children were under the age of 6 and in their mid-20s.

Fan Noise Control Using Herschel-quincke Resonators

NASA Technical Reports Server (NTRS)

Burdisso, Ricardo A.; Ng, Wing F.; Provenza, Andrew (Technical Monitor)

2003-01-01

The research effort proposed for this NASA NRA is mainly experimental. In addition, Virginia Tech is working in partnership with Goodrich Aerospace, Aerostructures Group for the analytical development needed to support the experimental endeavor, i.e. model development, design, and system studies. In this project, Herschel-Quincke (HQ)liner technology experiments will be performed at the NASA Glenn Active Noise Control Fan (ANCF) facility. A schematic of both inlet and aft HQ-liner systems installed in the ANCF rig as well as a picture of the Glenn facility is shown. The main goal is to simultaneously test in both the inlet and bypass duct sections. The by-pass duct will have HQ-systems in both the inner and outer duct walls. The main advantages of performing tests at the ANCF facility are that the effect of the inlet HQ-system on the by-pass HQ-system and vice versa, can be accurately determined from the in-duct modal data. Another significant advantage is that it offers the opportunity to assess (on a common basis) the proposed noise reduction concept on the ANCF rig which in the past has been used for assessing other active and passive noise reduction strategies.

A double-blind randomized placebo-controlled withdrawal trial comparing memantine and antipsychotics for the long-term treatment of function and neuropsychiatric symptoms in people with Alzheimer's disease (MAIN-AD).

PubMed

Ballard, Clive; Thomas, Alan; Gerry, Stephen; Yu, Ly-Mee; Aarsland, Dag; Merritt, Claire; Corbett, Anne; Davison, Christopher; Sharma, Narenda; Khan, Zunera; Creese, Byron; Loughlin, Paul; Bannister, Carol; Burns, Alistair; Win, Soe Nyunt; Walker, Zuzana

2015-04-01

Neuropsychiatric symptoms in Alzheimer disease (AD) cause significant distress and present a complex clinical challenge for treatment. Pharmacological treatment options are limited to antipsychotics, which carry extensive safety issues. There is emerging evidence to support the potential benefits of memantine, currently licensed for moderate to severe AD, in the prophylaxis of neuropsychiatric symptoms. The MAIN-AD study is a double-blind randomized placebo-controlled withdrawal trial comparing memantine with antipsychotics for the treatment of neuropsychiatric symptoms over 24 weeks. A total of 199 people with probable AD living in care homes already receiving an antipsychotic were randomized to receive either memantine or to continue an antipsychotic. The primary outcomes were function (Bristol Activities of Daily Living Scale [BADLS]) and agitation (Cohen-Mansfield Agitation Inventory [CMAI]). Secondary outcomes were Neuropsychiatric Inventory (NPI), Mini-Mental State Examination (MMSE), and mortality. There was no significant difference between groups on the BADLS or CMAI. At 24 weeks, there was a nonsignificant adjusted difference in favor of memantine on the BADLS of 0.23 (95% CI -1.80-2.27; P = .82) and in favor of antipsychotic on the CMAI of 0.09 (95% CI -0.35-8.53; P = .07). Although there were no significant differences in total NPI, there were 5.01 (95% CI -1.68-11.70; P = .05) and 3.63 (95% CI -1.40-8.67; P = .16) point advantages favoring antipsychotics at weeks 12 and 24, respectively. In addition, in an exploratory analysis, individuals allocated to antipsychotics were significantly less likely to experience relapse of neuropsychiatric symptoms at all time points. The group receiving memantine had a nonsignificant 1.3-point advantage on the MMSE at 24 weeks. This study indicates no benefits for memantine in the long-term treatment and prophylaxis of clinically significant neuropsychiatric symptoms. The results did indicate some benefits for antipsychotic medications in reducing the relapse of neuropsychiatric symptoms, but this must be balanced against increased mortality risk. Copyright © 2015 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Intravenous application of HI-6 salts (dichloride and dimethansulphonate) in pigs: comparison with pharmacokinetics profile after intramuscular administration.

PubMed

Zdarova Karasova, Jana; Zemek, Filip; Kunes, Martin; Kvetina, Jaroslav; Chladek, Jaroslav; Jun, Daniel; Bures, Jan; Tachecí, Ilja; Kuca, Kamil

2013-01-01

Oxime HI-6 is an acetylcholinesterase reactivator therapeutically efficient against nerve agents. Because of their physico-chemical properties, oximes are typically applied intramuscularly (i.m.). This route of administration has also some disadvantages, and alternative strategies ought to be examined. We evaluated the pharmacokinetic profiles of two HI-6 salts after their intravenous (i.v.) administration, and compare the results with the known pharmacokinetics after i.m. administration. Pigs were administered with HI-6 salts (i.v), either HI-6 dichloride (10.71 mg/kg) or molar equivalent HI-6 dimethansulphonate (13.59 mg/kg). Doses of the HI-6 salts corresponded with a standard HI-6 dichloride dose in one autoinjector (500 mg) and were recalculated for one kilogram of body weight. The main pharmacokinetic parameters are comparable after i.v. and i.m. HI-6 administration. The compared pharmacokinetic parameters were half-life, terminal rate constant, mean residence time of the molecule in the body, clearance, and the apparent volume in the terminal phase. The bioavailability after i.m. administration was comparable with that of i.v.; these results suggest that the oxime is well released from the muscle depot. Significant differences were found in parameters Cmax and Tmax which are important in cases of emergency when rapidity and bioavailability are paramount for the success of treatment. I.v. administration should solve the problem of rapid clearance. Infusion or bolus administration may be considered as a logical subsequent step in oxime treatment strategy. The main advantage is in maintenance of an effective therapeutic plasma concentration, a more easily achievable effective therapeutic concentration, and fewer local adverse reactions.

Cost-effectiveness of a mild compared with a standard strategy for IVF: a randomized comparison using cumulative term live birth as the primary endpoint.

PubMed

Polinder, S; Heijnen, E M E W; Macklon, N S; Habbema, J D F; Fauser, B J C M; Eijkemans, M J C

2008-02-01

BACKGROUND Conventional ovarian stimulation and the transfer of two embryos in IVF exhibits an inherent high probability of multiple pregnancies, resulting in high costs. We evaluated the cost-effectiveness of a mild compared with a conventional strategy for IVF. METHODS Four hundred and four patients were randomly assigned to undergo either mild ovarian stimulation/GnRH antagonist co-treatment combined with single embryo transfer, or standard stimulation/GnRH agonist long protocol and the transfer of two embryos. The main outcome measures are total costs of treatment within a 12 months period after randomization, and the relationship between total costs and proportion of cumulative pregnancies resulting in term live birth within 1 year of randomization. RESULTS Despite a significantly increased average number of IVF cycles (2.3 versus 1.7; P < 0.001), lower average total costs over a 12-month period (8333 versus euro10 745; P = 0.006) were observed using the mild strategy. This was mainly due to higher costs of the obstetric and post-natal period for the standard strategy, related to multiple pregnancies. The costs per pregnancy leading to term live birth were euro19 156 in the mild strategy and euro24 038 in the standard. The incremental cost-effectiveness ratio of the standard strategy compared with the mild strategy was euro185 000 per extra pregnancy leading to term live birth. CONCLUSIONS Despite an increased mean number of IVF cycles within 1 year, from an economic perspective, the mild treatment strategy is more advantageous per term live birth. It is unlikely, over a wide range of society's willingness-to-pay, that the standard treatment strategy is cost-effective, compared with the mild strategy.

The Advantages and Disadvantages of Using ICT as a Mediating Artefact in Classrooms Compared to Alternative Tools

ERIC Educational Resources Information Center

Postholm, May Britt

2007-01-01

This article discusses the advantages and disadvantages of using information and communication technology (ICT) as a mediating artefact in the classroom compared to alternative tools with illustrations from a qualitative classroom study. The aim of the article is to describe and show the conditions that have to be satisfied if ICT is to have an…

Compounding vs standardized commercial parenteral nutrition product: pros and cons.

PubMed

Gervasio, Jane

2012-03-01

Standardized commercial parenteral nutrition (PN) formulations have advantages and disadvantages as compared with PN formulations compounded using an automated compounding device. These advantages and disadvantages are discussed along with the supporting available research.

Design of a mobile hydrological data measurement system

NASA Astrophysics Data System (ADS)

Liu, Yunping; Wang, Tianmiao; Dai, Fenfen

2017-06-01

The current hydrological data acquisition is mainly used in the instrument measurement. Instrument measurement equipment is mainly fixed in a certain water area and the device is easy to be lost. In view of a series of problems, the dynamic measurement system is established by the method of unmanned surface vessel and embedded technology, which can realize any positions measurement of a lake. This method has many advantages, such as mobile convenience, saving money and so on.

Next generation sequencing (NGS): a golden tool in forensic toolkit.

PubMed

Aly, S M; Sabri, D M

The DNA analysis is a cornerstone in contemporary forensic sciences. DNA sequencing technologies are powerful tools that enrich molecular sciences in the past based on Sanger sequencing and continue to glowing these sciences based on Next generation sequencing (NGS). Next generation sequencing has excellent potential to flourish and increase the molecular applications in forensic sciences by jumping over the pitfalls of the conventional method of sequencing. The main advantages of NGS compared to conventional method that it utilizes simultaneously a large number of genetic markers with high-resolution of genetic data. These advantages will help in solving several challenges such as mixture analysis and dealing with minute degraded samples. Based on these new technologies, many markers could be examined to get important biological data such as age, geographical origins, tissue type determination, external visible traits and monozygotic twins identification. It also could get data related to microbes, insects, plants and soil which are of great medico-legal importance. Despite the dozens of forensic research involving NGS, there are requirements before using this technology routinely in forensic cases. Thus, there is a great need to more studies that address robustness of these techniques. Therefore, this work highlights the applications of forensic sciences in the era of massively parallel sequencing.

Performance of PZT8 Versus PZT4 Piezoceramic Materials in Ultrasonic Transducers

NASA Astrophysics Data System (ADS)

DeAngelis, Dominick A.; Schulze, Gary W.

PZT8 and PZT4 are the common "hard" piezoceramic materials used in power ultrasonic transducers (e.g., welding, cutting, sonar, etc.). PZT8 is perceived as the better choice for resonant devices, primarily due to its higher mechanical quality factor Qm. PZT8 is also considered a "harder" material compared to PZT4, since it has better stability at higher preloads and drive levels. Many transducer designers never consider PZT4 for their applications, even though it has clear advantages such as higher output (i.e., higher d33). Even the perceived advantage of PZT8 regarding Qm may not be significant for most Langevin, bolted stack type transducers if the mechanical joint losses dominate. This research is a case study on the performance of identical ultrasonic transducers used for semiconductor wire bonding, assembled with either PZT8 or PZT4 materials. The main purpose of the study is to establish rule-of-thumb transducer design guidelines for the selection of PZT8 versus PZT4 materials. Several metrics are investigated such as impedance, frequency, capacitance, dielectric loss, Qm, heating, displacement gain, and electro-mechanical coupling factor. The experimental and theoretical research methods include Bode plots, thermal IR camera imaging, scanning laser vibrometry and coupled-field finite element analysis.

A Retrospective Case Series of Carbon Fiber Plate Fixation of Ankle Fractures.

PubMed

Pinter, Zachariah W; Smith, Kenneth S; Hudson, Parke W; Jones, Caleb W; Hadden, Ryan; Elattar, Osama; Shah, Ashish

2018-06-01

Distal fibula fractures represent a common problem in orthopaedics. When fibula fractures require operative fixation, implants are typically made from stainless steel or titanium alloys. Carbon fiber implants have been used elsewhere in orthopaedics for years, and their advantages include a modulus of elasticity similar to that of bone, biocompatibility, increased fatigue strength, and radiolucency. This study hypothesized that carbon fiber plates would provide similar outcomes for ankle fracture fixation as titanium and steel implants. A retrospective chart review was performed of 30 patients who underwent fibular open reduction and internal fixation (ORIF). The main outcomes assessed were postoperative union rate and complication rate. The nonunion or failure rate for carbon fiber plates was 4% (1/24), and the union rate was 96% (23/24). The mean follow-up time was 20 months, and the complication rate was 8% (2/24). Carbon fiber plates are a viable alternative to metal plates in ankle fracture fixation, demonstrating union and complication rates comparable to those of traditional fixation techniques. Their theoretical advantages and similar cost make them an attractive implant choice for ORIF of the fibula. However, further studies are needed for extended follow-up and inclusion of larger patient cohorts. Level IV: Retrospective Case series.

User costs as one of main advantages of precast concrete application in highway construction

NASA Astrophysics Data System (ADS)

Tomek, Radan

2017-09-01

Road user cost primarily refer to the monetized components of road (re)construction impacts, such as the user delay costs, vehicle operating costs, crash costs and emission costs. Objective of this paper is to analyze and appraise the advantages and benefits of the innovative prefabrication approach in contrast to traditional cast-in-place construction method. The goal is to reduce these additional costs borne by motorists and the community at-large as a result of road construction activity to their minimum through application of the prefabrication. Assessing two basic possible approaches to highway infrastructure construction - casting the road pavements and structures either in place or precast off the site - it can be concluded that the initial capital investment costs do not vary much. Substantial differences can be recognized when comparing their life-cycle costs and an extent to which their construction process affects the public, environment and the local economy. Prefabrication of any structure component off-site offers major construction time and user cost savings in comparison with the traditional cast-in-place methods of construction. Precast prestressed road pavements’ technology and precasting bridges’ parts and elements offers dramatic increase in durability, while it also substantially decreases construction time and resulting user costs.

Assessment of vinyl polysiloxane as an innovative injection material for the anatomical study of vasculature.

PubMed

Dargaud, Jacques; Chalvet, Laurane; Del Corso, Marco; Cerboni, Elsa; Feugier, Patrick; Mertens, Patrick; Simon, Emile

2016-04-01

There are numerous injection materials for the study of vasculature in anatomical specimens, each having its own advantages and disadvantages. Latex and resins are the most widely used injection materials but need several days to set. The development of new materials taking shorter time to polymerize might be very useful to improve anatomic specimen study conditions. The aim of the present study was to evaluate vinyl polysiloxane (VPS), a silicon material widely used for dental impressions with the advantage to set very rapidly, as an injection material. We assessed the preparation, use, diffusion and setting time of the product in different anatomical regions (central nervous system, external carotid/jugular, lower limb) to observe its behavior in variably sized vessels. Our results suggest that VPS might be of interest for the study of vessels in anatomical specimens. The main strengths of the product are represented by (1) simplicity of use, as it is a ready-to-use material, (2) very rapid polymerization, (3) availability in a range of viscosities making easier the exploration of small vessels, (4) its better elasticity compared to resins, (5) and finally its availability in a range of colors making it a material of choice for vascular system dissections including those with very small caliber vessels.

Are multiple visual short-term memory storages necessary to explain the retro-cue effect?

PubMed

Makovski, Tal

2012-06-01

Recent research has shown that change detection performance is enhanced when, during the retention interval, attention is cued to the location of the upcoming test item. This retro-cue advantage has led some researchers to suggest that visual short-term memory (VSTM) is divided into a durable, limited-capacity storage and a more fragile, high-capacity storage. Consequently, performance is poor on the no-cue trials because fragile VSTM is overwritten by the test display and only durable VSTM is accessible under these conditions. In contrast, performance is improved in the retro-cue condition because attention keeps fragile VSTM accessible. The aim of the present study was to test the assumptions underlying this two-storage account. Participants were asked to encode an array of colors for a change detection task involving no-cue and retro-cue trials. A retro-cue advantage was found even when the cue was presented after a visual (Experiment 1) or a central (Experiment 2) interference. Furthermore, the magnitude of the interference was comparable between the no-cue and retro-cue trials. These data undermine the main empirical support for the two-storage account and suggest that the presence of a retro-cue benefit cannot be used to differentiate between different VSTM storages.

Assessing Affective and Deliberative Decision-Making: Adaptation of the Columbia Card Task to Brazilian Portuguese.

PubMed

Kluwe-Schiavon, Bruno; Sanvicente-Vieira, Breno; Viola, Thiago W; Veiga, Eduardo; Bortolotto, Vanessa; Grassi-Oliveira, Rodrigo

2015-11-20

The ability to predict reward and punishment is essential for decision-making and the ability to learn about an ever-changing environment. Therefore, efforts have been made in understanding the mechanisms underlying decision-making, especially regarding how affective and deliberative processes interact with risk behavior. To adapt to Brazilian Portuguese the Columbia Card Task (CCT) and investigate affective and deliberative processes involved in decision-making. This study had two main phases: (1) a transcultural adaptation and (2) a pilot study. The feedback manipulation among the three conditions of CCT had an effect on the risk-taking level (p < .005, ES = .201). In addition, the feedback manipulation among the three conditions of CCT had an effect on the information use at both the individual and group levels. Further, a linear regression suggested that the use of information, indicated by the advantageous level of the scenarios, predict the number of cards chosen R 2 = .029, p < .001, accounting for 17% of the variance. The Brazilian CCT performs well and is a versatile method for the assessment of affective and deliberative decision-making under risk according to different feedback manipulation scenarios. This study goes further, comparing electrodermal activity during hot and warm conditions and addressing an advantageous level index analysis to asses deliberative processing.

Theoretical analysis to investigate thermal performance of co-axial heat pipe solar collector

NASA Astrophysics Data System (ADS)

Azad, E.

2011-12-01

The thermal performance of co-axial heat pipe solar collector which consist of a collector 15 co-axial heat pipes surrounded by a transparent envelope and which heat a fluid flowing through the condenser tubes have been predicted using heat transfer analytical methods. The analysis considers conductive and convective losses and energy transferred to a fluid flowing through the collector condenser tubes. The thermal performances of co-axial heat pipe solar collector is developed and are used to determine the collector efficiency, which is defined as the ratio of heat taken from the water flowing in the condenser tube and the solar radiation striking the collector absorber. The theoretical water outlet temperature and efficiency are compared with experimental results and it shows good agreement between them. The main advantage of this collector is that inclination of collector does not have influence on performance of co-axial heat pipe solar collector therefore it can be positioned at any angle from horizontal to vertical. In high building where the roof area is not enough the co-axial heat pipe solar collectors can be installed on the roof as well as wall of the building. The other advantage is each heat pipe can be topologically disconnected from the manifold.

Fishing on chips: up-and-coming technological advances in analysis of zebrafish and Xenopus embryos.

PubMed

Zhu, Feng; Skommer, Joanna; Huang, Yushi; Akagi, Jin; Adams, Dany; Levin, Michael; Hall, Chris J; Crosier, Philip S; Wlodkowic, Donald

2014-11-01

Biotests performed on small vertebrate model organisms provide significant investigative advantages as compared with bioassays that employ cell lines, isolated primary cells, or tissue samples. The main advantage offered by whole-organism approaches is that the effects under study occur in the context of intact physiological milieu, with all its intercellular and multisystem interactions. The gap between the high-throughput cell-based in vitro assays and low-throughput, disproportionally expensive and ethically controversial mammal in vivo tests can be closed by small model organisms such as zebrafish or Xenopus. The optical transparency of their tissues, the ease of genetic manipulation and straightforward husbandry, explain the growing popularity of these model organisms. Nevertheless, despite the potential for miniaturization, automation and subsequent increase in throughput of experimental setups, the manipulation, dispensing and analysis of living fish and frog embryos remain labor-intensive. Recently, a new generation of miniaturized chip-based devices have been developed for zebrafish and Xenopus embryo on-chip culture and experimentation. In this work, we review the critical developments in the field of Lab-on-a-Chip devices designed to alleviate the limits of traditional platforms for studies on zebrafish and clawed frog embryo and larvae. © 2014 International Society for Advancement of Cytometry. © 2014 International Society for Advancement of Cytometry.

Selenocysteine in thiol/disulfide-like exchange reactions.

PubMed

Hondal, Robert J; Marino, Stefano M; Gladyshev, Vadim N

2013-05-01

Among trace elements used as cofactors in enzymes, selenium is unique in that it is incorporated into proteins co-translationally in the form of an amino acid, selenocysteine (Sec). Sec differs from cysteine (Cys) by only one atom (selenium versus sulfur), yet this switch dramatically influences important aspects of enzyme reactivity. The main focus of this review is an updated and critical discussion on how Sec might be used to accelerate thiol/disulfide-like exchange reactions in natural selenoenzymes, compared with their Cys-containing homologs. We discuss in detail three major aspects associated with thiol/disulfide exchange reactions: (i) nucleophilicity of the attacking thiolate (or selenolate); (ii) electrophilicity of the center sulfur (or selenium) atom; and (iii) stability of the leaving group (sulfur or selenium). In all these cases, we analyze the benefits that selenium might provide in these types of reactions. It is the biological thiol oxidoreductase-like function that benefits from the use of Sec, since Sec functions to chemically accelerate the rate of these reactions. We review various hypotheses that could help explain why Sec is used in enzymes, particularly with regard to competitive chemical advantages provided by the presence of the selenium atom in enzymes. Ultimately, these chemical advantages must be connected to biological functions of Sec.

Adiabatic pipelining: a key to ternary computing with quantum dots.

PubMed

Pečar, P; Ramšak, A; Zimic, N; Mraz, M; Lebar Bajec, I

2008-12-10

The quantum-dot cellular automaton (QCA), a processing platform based on interacting quantum dots, was introduced by Lent in the mid-1990s. What followed was an exhilarating period with the development of the line, the functionally complete set of logic functions, as well as more complex processing structures, however all in the realm of binary logic. Regardless of these achievements, it has to be acknowledged that the use of binary logic is in computing systems mainly the end result of the technological limitations, which the designers had to cope with in the early days of their design. The first advancement of QCAs to multi-valued (ternary) processing was performed by Lebar Bajec et al, with the argument that processing platforms of the future should not disregard the clear advantages of multi-valued logic. Some of the elementary ternary QCAs, necessary for the construction of more complex processing entities, however, lead to a remarkable increase in size when compared to their binary counterparts. This somewhat negates the advantages gained by entering the ternary computing domain. As it turned out, even the binary QCA had its initial hiccups, which have been solved by the introduction of adiabatic switching and the application of adiabatic pipeline approaches. We present here a study that introduces adiabatic switching into the ternary QCA and employs the adiabatic pipeline approach to successfully solve the issues of elementary ternary QCAs. What is more, the ternary QCAs presented here are sizewise comparable to binary QCAs. This in our view might serve towards their faster adoption.

Performance evaluation of nonlinear energy harvesting with magnetically coupled dual beams

NASA Astrophysics Data System (ADS)

Lan, Chunbo; Tang, Lihua; Qin, Weiyang

2017-04-01

To enhance the output power and broaden the operation bandwidth of vibration energy harvesters (VEH), nonlinear two degree-of-freedom (DOF) energy harvesters have attracted wide attention recently. In this paper, we investigate the performance of a nonlinear VEH with magnetically coupled dual beams and compare it with the typical Duffing-type VEH to find the advantages and drawbacks of this nonlinear 2-DOF VEH. First, based on the lumped parameter model, the characteristics of potential energy shapes and static equilibriums are analyzed. It is noted that the dual beam configuration is much easy to be transformed from a mono-stable state into a bi-stable state when the repulsive magnet force increases. Based on the equilibrium positions and different kinds of nonlinearities, four nonlinearity regimes are determined. Second, the performance of 1-DOF and 2-DOF configurations are compared respectively in these four nonlinearity regimes by simulating the forward sweep responses of these two nonlinear VEHs under different acceleration levels. Several meaningful conclusions are obtained. First, the main alternative to enlarge the operation bandwidth for dual-beam configuration is chaotic oscillation, in which two beams jump between two stable positions chaotically. However, the large-amplitude periodic oscillations, such as inter-well oscillation, cannot take place in both piezoelectric and parasitic beams at the same time. Generally speaking, both of the magnetically coupled dual-beam energy harvester and Duffingtype energy harvester, have their own advantages and disadvantages, while given a large enough base excitation, the maximum voltages of these two systems are almost the same in all these four regimes.

How to count cells: the advantages and disadvantages of the isotropic fractionator compared with stereology.

PubMed

Herculano-Houzel, Suzana; von Bartheld, Christopher S; Miller, Daniel J; Kaas, Jon H

2015-04-01

The number of cells comprising biological structures represents fundamental information in basic anatomy, development, aging, drug tests, pathology and genetic manipulations. Obtaining unbiased estimates of cell numbers, however, was until recently possible only through stereological techniques, which require specific training, equipment, histological processing and appropriate sampling strategies applied to structures with a homogeneous distribution of cell bodies. An alternative, the isotropic fractionator (IF), became available in 2005 as a fast and inexpensive method that requires little training, no specific software and only a few materials before it can be used to quantify total numbers of neuronal and non-neuronal cells in a whole organ such as the brain or any dissectible regions thereof. This method entails transforming a highly anisotropic tissue into a homogeneous suspension of free-floating nuclei that can then be counted under the microscope or by flow cytometry and identified morphologically and immunocytochemically as neuronal or non-neuronal. We compare the advantages and disadvantages of each method and provide researchers with guidelines for choosing the best method for their particular needs. IF is as accurate as unbiased stereology and faster than stereological techniques, as it requires no elaborate histological processing or sampling paradigms, providing reliable estimates in a few days rather than many weeks. Tissue shrinkage is also not an issue, since the estimates provided are independent of tissue volume. The main disadvantage of IF, however, is that it necessarily destroys the tissue analyzed and thus provides no spatial information on the cellular composition of biological regions of interest.

Individual differences in emotion processing: how similar are diffusion model parameters across tasks?

PubMed

Mueller, Christina J; White, Corey N; Kuchinke, Lars

2017-11-27

The goal of this study was to replicate findings of diffusion model parameters capturing emotion effects in a lexical decision task and investigating whether these findings extend to other tasks of implicit emotion processing. Additionally, we were interested in the stability of diffusion model parameters across emotional stimuli and tasks for individual subjects. Responses to words in a lexical decision task were compared with responses to faces in a gender categorization task for stimuli of the emotion categories: happy, neutral and fear. Main effects of emotion as well as stability of emerging response style patterns as evident in diffusion model parameters across these tasks were analyzed. Based on earlier findings, drift rates were assumed to be more similar in response to stimuli of the same emotion category compared to stimuli of a different emotion category. Results showed that emotion effects of the tasks differed with a processing advantage for happy followed by neutral and fear-related words in the lexical decision task and a processing advantage for neutral followed by happy and fearful faces in the gender categorization task. Both emotion effects were captured in estimated drift rate parameters-and in case of the lexical decision task also in the non-decision time parameters. A principal component analysis showed that contrary to our hypothesis drift rates were more similar within a specific task context than within a specific emotion category. Individual response patterns of subjects across tasks were evident in significant correlations regarding diffusion model parameters including response styles, non-decision times and information accumulation.

Proof of live birth using postmortem multislice computed tomography (pmMSCT) in cases of suspected neonaticide: advantages of diagnostic imaging compared to conventional autopsy.

PubMed

Guddat, Saskia S; Gapert, René; Tsokos, Michael; Oesterhelweg, Lars

2013-03-01

Proof of live birth is of major importance in suspected neonaticide cases. Although not without controversy the lung flotation test is the main method used to asses this in different jurisdictions worldwide. The present study examines the usefulness of postmortem multislice computed tomography (pmMSCT) in the detection of live birth signs. Body scans were conducted on four infants, one was stillborn, another died a day after birth and the other two were classified as neonaticides. The appearance of the lungs, gastrointestinal tract and vascular system of the liver was compared in these cases. Clear differences were discernable between the lungs of the stillborn and the 1 day old infant. The aerated lungs and air in the stomach and duodenum were clearly visible in the latter case while the stillborn infant lacked these signs. The two neonaticide cases demonstrated similarly aerated lung tissue to the 1 day old infant. The hepatic vessels did not show any putrefactive gas changes in any of the cases. The extent of aeration of the peripheral alveoli was easily observable on the pmMSCT, thus making it a useful tool in the possible differentiation between artificially and naturally aerated lungs. During the four autopsies the classic flotation tests were performed and similar positive aeration of the lungs in the two neonaticides was shown. The stillborn's tests, on the other hand were negative for aeration. The results of this study clearly demonstrate the advantages of using pmMSCT before commencing a conventional autopsy in cases of suspected neonaticide.

Ultra-sonic motor for the actuators of space optical communications terminal

NASA Astrophysics Data System (ADS)

Araki, T.; Kobayashi, Y.; Kawashima, N.; Maniwa, K.; Obara, S.; Zakoji, T.; Kubota, A.

2017-02-01

The main advantages of space optical communication technologies compared with RF communications are 1) Wide bandwidth that enables a much higher data rate and 2) Smaller antenna and hardware due to the ultra-short wavelength characteristics. The cost and weight of each spacecraft has been decreasing year by year. Space optical communication technologies, that are being established, have been required to reduce cost and weight recently. The general rotational actuators of spacecraft are magnetic motors. However, it is difficult to reduce it's weight and cost dramatically since magnetic motors include iron core and metal coil. In addition, we do not have the flexibility of magnetic motor's shape. JAXA is interested in optical data relay including LEO-GEO optical communication. In this application, space optical communication equipment must equip rotational actuators as a coarse pointing mechanism. Therefore, the authors have focused on ultra-sonic motors (USM) for the equipment of space optical communication so that we will achieve lower cost, lower weight and a more-flexible-shape of actuators than magnetic motors. In this presentation, the authors propose applications of USM as actuators of space optical communications. USM has been widely used in our life and industry. Usage in industry includes vacuum environments of the semiconductor manufacturing process. So, the authors estimated the usage of USM can be applied to actuators of spacecraft. At first, the authors discuss the advantages and disadvantages of USM compared to traditional magnetic motors. Then, driving performance of USM under vacuum, high and low-temperature conditions are shown. At last, results of life estimation test of USM are discussed.

A systematic review and cost analysis of robot-assisted hysterectomy in malignant and benign conditions.

PubMed

Tapper, Anna-Maija; Hannola, Mikko; Zeitlin, Rainer; Isojärvi, Jaana; Sintonen, Harri; Ikonen, Tuija S

2014-06-01

In order to assess the effectiveness and costs of robot-assisted hysterectomy compared with conventional techniques we reviewed the literature separately for benign and malignant conditions, and conducted a cost analysis for different techniques of hysterectomy from a hospital economic database. Unlimited systematic literature search of Medline, Cochrane and CRD databases produced only two randomized trials, both for benign conditions. For the outcome assessment, data from two HTA reports, one systematic review, and 16 original articles were extracted and analyzed. Furthermore, one cost modelling and 13 original cost studies were analyzed. In malignant conditions, less blood loss, fewer complications and a shorter hospital stay were considered as the main advantages of robot-assisted surgery, like any mini-invasive technique when compared to open surgery. There were no significant differences between the techniques regarding oncological outcomes. When compared to laparoscopic hysterectomy, the main benefit of robot-assistance was a shorter learning curve associated with fewer conversions but the length of robotic operation was often longer. In benign conditions, no clinically significant differences were reported and vaginal hysterectomy was considered the optimal choice when feasible. According to Finnish data, the costs of robot-assisted hysterectomies were 1.5-3 times higher than the costs of conventional techniques. In benign conditions the difference in cost was highest. Because of expensive disposable supplies, unit costs were high regardless of the annual number of robotic operations. Hence, in the current distribution of cost pattern, economical effectiveness cannot be markedly improved by increasing the volume of robotic surgery. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Hybrid ECG-gated versus non-gated 512-slice CT angiography of the aorta and coronary artery: image quality and effect of a motion correction algorithm.

PubMed

Lee, Ji Won; Kim, Chang Won; Lee, Geewon; Lee, Han Cheol; Kim, Sang-Pil; Choi, Bum Sung; Jeong, Yeon Joo

2018-02-01

Background Using the hybrid electrocardiogram (ECG)-gated computed tomography (CT) technique, assessment of entire aorta, coronary arteries, and aortic valve can be possible using single-bolus contrast administration within a single acquisition. Purpose To compare the image quality of hybrid ECG-gated and non-gated CT angiography of the aorta and evaluate the effect of a motion correction algorithm (MCA) on coronary artery image quality in a hybrid ECG-gated aorta CT group. Material and Methods In total, 104 patients (76 men; mean age = 65.8 years) prospectively randomized into two groups (Group 1 = hybrid ECG-gated CT; Group 2 = non-gated CT) underwent wide-detector array aorta CT. Image quality, assessed using a four-point scale, was compared between the groups. Coronary artery image quality was compared between the conventional reconstruction and motion correction reconstruction subgroups in Group 1. Results Group 1 showed significant advantages over Group 2 in aortic wall, cardiac chamber, aortic valve, coronary ostia, and main coronary arteries image quality (all P < 0.001). All Group 1 patients had diagnostic image quality of the aortic wall and left ostium. The MCA significantly improved the image quality of the three main coronary arteries ( P < 0.05). Moreover, per-vessel interpretability improved from 92.3% to 97.1% with the MCA ( P = 0.013). Conclusion Hybrid ECG-gated CT significantly improved the heart and aortic wall image quality and the MCA can further improve the image quality and interpretability of coronary arteries.

Issues in Education: African American Male-Only Schools. Is That the Solution?

ERIC Educational Resources Information Center

Greathouse, Betty; Sparling, Saundra

1993-01-01

Examines the advantages and disadvantages of African-American male-only classes and schools, which are staffed mainly by African-American male teachers. Focuses on attempts to create such institutions in Detroit, Baltimore, Milwaukee, and Dade County, Florida. (MDM)

New system for bathing bedridden patients

NASA Technical Reports Server (NTRS)

Greenleaf, J. E.; Staley, R. A.; Payne, P. A.

1973-01-01

Multihead shower facility can be used with minimal patient handling. Waterproof curtain allows patient to bathe with his head out of shower. He can move completely inside shower to wash his face and hair. Main advantage of shower system is time saved in giving bath.

Our method of correcting cryptotia.

PubMed

Yanai, A; Tange, I; Bandoh, Y; Tsuzuki, K; Sugino, H; Nagata, S

1988-12-01

Our technique for the correction of cryptotia using both Z-plasty and the advancement flap is described. The main advantages are the simple design of the skin incision and the possibility of its application to cryptotia other than severe cartilage deformity and extreme lack of skin.

Simulations and Games as Subversive Activities.

ERIC Educational Resources Information Center

Christopher, Elizabeth M.

1999-01-01

Compares the advantages and disadvantages of using simulation games as a teaching tool. Describes some tactics to turn disadvantages into advantages, and concludes by describing the role of the game leader as crucial to learning outcomes. (Author/AEF)

A review of lipidomic technologies applicable to sphingolipidomics and their relevant applications

PubMed Central

Han, Xianlin; Jiang, Xuntian

2009-01-01

Sphingolipidomics, a branch of lipidomics, focuses on the large-scale study of the cellular sphingolipidomes. In the current review, two main approaches for the analysis of cellular sphingolipidomes (i.e. LC-MS- or LC-MS/MS-based approach and shotgun lipidomics-based approach) are briefly discussed. Their advantages, some considerations of these methods, and recent applications of these approaches are summarized. It is the authors’ sincere hope that this review article will add to the readers understanding of the advantages and limitations of each developed method for the analysis of a cellular sphingolipidome. PMID:19690629

Tachometer Derived From Brushless Shaft-Angle Resolver

NASA Technical Reports Server (NTRS)

Howard, David E.; Smith, Dennis A.

1995-01-01

Tachometer circuit operates in conjunction with brushless shaft-angle resolver. By performing sequence of straightforward mathematical operations on resolver signals and utilizing simple trigonometric identity, generates voltage proportional to rate of rotation of shaft. One advantage is use of brushless shaft-angle resolver as main source of rate signal: no brushes to wear out, no brush noise, and brushless resolvers have proven robustness. No switching of signals to generate noise. Another advantage, shaft-angle resolver used as shaft-angle sensor, tachometer input obtained without adding another sensor. Present circuit reduces overall size, weight, and cost of tachometer.

The use of online methodologies in studying paraphilias - A review.

PubMed

Griffiths, Mark D

2012-12-01

Aims The paper outlines the advantages, disadvantages, and other implications of using the Internet to collect data from those people displaying sexually paraphilic behavior. Method Using empirical and clinical studies published in the paraphilia literature, the main issues concerning online paraphilic data collection are reviewed and discussed. Results The specific online data collection methods examined included the collection of paraphilic data via (i) online questionnaires, (ii) online forums, (iii) online interviews, and (iv) online participant observation. Conclusions It is concluded that there are many useful and practical advantages of using online research methodologies to examine sexually paraphilic behavior.

Introduction to D-He(3) fusion reactors

NASA Technical Reports Server (NTRS)

Vlases, G. C.; Steinhauer, L. C.

1989-01-01

A review and evaluation of D-He(3) fusion reactor technology is presented. The advantages and disadvantages of the D-He(3) and D-T reactor cycles are outlined and compared. In addition, the general design features of D-He(3) tokamaks and field reversed configuration (FRC) reactors are described and the relative merits of each are compared. It is concluded that both tokamaks and FRC's offer certain advantages, and that the ultimate decision as to which to persue for terrestrial power generation will depend heavily on how the physics performance of each of them develops over the next few years. It is clear that the D-He(3) fuel cycle offers marked advantages over the D-T cycle. Although the physics requirements for D-He(3) are more demanding, the overwhelming advantages resulting from the two order of magnitude reduction of neutron flux are expected to lead to a shorter time to commercialization than for the D-T cycle.

Introduction to D-He(3) fusion reactors

NASA Astrophysics Data System (ADS)

Vlases, G. C.; Steinhauer, L. C.

1989-07-01

A review and evaluation of D-He(3) fusion reactor technology is presented. The advantages and disadvantages of the D-He(3) and D-T reactor cycles are outlined and compared. In addition, the general design features of D-He(3) tokamaks and field reversed configuration (FRC) reactors are described and the relative merits of each are compared. It is concluded that both tokamaks and FRC's offer certain advantages, and that the ultimate decision as to which to persue for terrestrial power generation will depend heavily on how the physics performance of each of them develops over the next few years. It is clear that the D-He(3) fuel cycle offers marked advantages over the D-T cycle. Although the physics requirements for D-He(3) are more demanding, the overwhelming advantages resulting from the two order of magnitude reduction of neutron flux are expected to lead to a shorter time to commercialization than for the D-T cycle.

Stochastic or statistic? Comparing flow duration curve models in ungauged basins and changing climates

NASA Astrophysics Data System (ADS)

Müller, M. F.; Thompson, S. E.

2015-09-01

The prediction of flow duration curves (FDCs) in ungauged basins remains an important task for hydrologists given the practical relevance of FDCs for water management and infrastructure design. Predicting FDCs in ungauged basins typically requires spatial interpolation of statistical or model parameters. This task is complicated if climate becomes non-stationary, as the prediction challenge now also requires extrapolation through time. In this context, process-based models for FDCs that mechanistically link the streamflow distribution to climate and landscape factors may have an advantage over purely statistical methods to predict FDCs. This study compares a stochastic (process-based) and statistical method for FDC prediction in both stationary and non-stationary contexts, using Nepal as a case study. Under contemporary conditions, both models perform well in predicting FDCs, with Nash-Sutcliffe coefficients above 0.80 in 75 % of the tested catchments. The main drives of uncertainty differ between the models: parameter interpolation was the main source of error for the statistical model, while violations of the assumptions of the process-based model represented the main source of its error. The process-based approach performed better than the statistical approach in numerical simulations with non-stationary climate drivers. The predictions of the statistical method under non-stationary rainfall conditions were poor if (i) local runoff coefficients were not accurately determined from the gauge network, or (ii) streamflow variability was strongly affected by changes in rainfall. A Monte Carlo analysis shows that the streamflow regimes in catchments characterized by a strong wet-season runoff and a rapid, strongly non-linear hydrologic response are particularly sensitive to changes in rainfall statistics. In these cases, process-based prediction approaches are strongly favored over statistical models.

Comparing statistical and process-based flow duration curve models in ungauged basins and changing rain regimes

NASA Astrophysics Data System (ADS)

Müller, M. F.; Thompson, S. E.

2016-02-01

The prediction of flow duration curves (FDCs) in ungauged basins remains an important task for hydrologists given the practical relevance of FDCs for water management and infrastructure design. Predicting FDCs in ungauged basins typically requires spatial interpolation of statistical or model parameters. This task is complicated if climate becomes non-stationary, as the prediction challenge now also requires extrapolation through time. In this context, process-based models for FDCs that mechanistically link the streamflow distribution to climate and landscape factors may have an advantage over purely statistical methods to predict FDCs. This study compares a stochastic (process-based) and statistical method for FDC prediction in both stationary and non-stationary contexts, using Nepal as a case study. Under contemporary conditions, both models perform well in predicting FDCs, with Nash-Sutcliffe coefficients above 0.80 in 75 % of the tested catchments. The main drivers of uncertainty differ between the models: parameter interpolation was the main source of error for the statistical model, while violations of the assumptions of the process-based model represented the main source of its error. The process-based approach performed better than the statistical approach in numerical simulations with non-stationary climate drivers. The predictions of the statistical method under non-stationary rainfall conditions were poor if (i) local runoff coefficients were not accurately determined from the gauge network, or (ii) streamflow variability was strongly affected by changes in rainfall. A Monte Carlo analysis shows that the streamflow regimes in catchments characterized by frequent wet-season runoff and a rapid, strongly non-linear hydrologic response are particularly sensitive to changes in rainfall statistics. In these cases, process-based prediction approaches are favored over statistical models.

The Role of Staminate Flowers in the Breeding System of Olea europaea (Oleaceae): an Andromonoecious, Wind‐pollinated Taxon

PubMed Central

CUEVAS, JULIÁN; POLITO, VITO S.

2004-01-01

• Background and Aims Andromonoecy, as a breeding system, has generated a considerable body of theory in terms of sexual selection, but extended records comparing the performance of pollen grains from staminate versus hermaphrodite flowers are still sparse. The objective in this study was to elucidate the role of staminate flowers in the andromonoecious breeding system of olive (Olea europaea). • Methods To determine the meaning of staminate flowers, an evaluation was made of resource allocation to, and phenology of, staminate and hermaphrodite flowers in the cultivar ‘Mission’, and a comparison was made of the male function between both kinds of flowers. • Key Results Dry weight of hermaphrodite flowers was 19 % greater than dry weight of staminate flowers arising in comparable positions of the panicle. This difference was mainly due to pistil and petal weight; there were no significant differences in stamen weight. There were no significant differences between staminate and hermaphrodite flowers in either amount of pollen per anther, or pollen quality as determined by pollen viability, germinability or ability to fertilize other flowers. There was no significant link between gender and time of anthesis. However, position of the flower within the panicle correlated with time of anthesis and gender. Flowers at the apex and at primary pedicels tended to be hermaphrodite and open earlier, whereas flowers arising in secondary pedicels were mainly staminate and were commonly the last to reach anthesis. • Conclusions It is proposed that the main advantage provided by production of staminate flowers in olive is to enhance male fitness by increasing pollen output at the whole plant level, although a relict function of attracting pollinators cannot be completely discarded. PMID:15037451

Fluoxetine. A pharmacoeconomic review of its use in depression.

PubMed

Wilde, M I; Benfield, P

1998-05-01

Depressive illness is a common, often unrecognised and untreated condition with substantial associated costs, particularly indirect costs (e.g. lost productivity and absenteeism). The improved tolerability profile of fluoxetine and associated lower discontinuation rates, the relative safety of the drug in overdosage and its similar efficacy compared with tricyclic antidepressants have provided the main rationale for using this agent in depressed patients. Pharmacoeconomic analyses of fluoxetine have mainly sought to determine whether its higher acquisition cost in comparison with tricyclic antidepressants can be offset by reductions in other costs and whether the use of this agent as first-line therapy can be justified. Studies have also attempted to determine whether the selective serotonin reuptake inhibitors (SSRIs) can be distinguished from one another on pharmacoeconomic grounds; overall efficacy and tolerability of these agents appear to be similar, although tolerability data are conflicting. Most analyses have been of a retrospective database or clinical decision analytic model design; two prospective trials (one conducted in a naturalistic setting) have been conducted. These studies have mainly considered direct treatment costs only from the perspective of the healthcare payer. Available evidence suggests that overall total direct healthcare costs for patients who start antidepressant therapy with fluoxetine are similar to, or lower than, those for patients who start therapy with tricyclic agents or other SSRIs. Offsetting of the higher acquisition cost of fluoxetine compared with that of tricyclic agents may be accounted for by lower in- and outpatient costs with fluoxetine, a possible lower risk of absenteeism from work and lower mean total medical costs associated with acute overdosage. Between-treatment differences in drug use patterns may also, in part, explain the observed differences in total healthcare costs between fluoxetine and other antidepressants. In particular, patients beginning therapy with fluoxetine are more likely to receive treatment regimens that meet minimum recommended guidelines for dosage and duration and are less likely to require treatment switching/augmentation than those receiving tricyclic antidepressants or other SSRIs as initial therapy. In addition, fewer fluoxetine than tricyclic antidepressant recipients discontinue therapy early, and fewer fluoxetine recipients require upward dosage titration or concomitant anxiolytic/ hypnotic medications than patients receiving other SSRIs. In conclusion, fluoxetine is a well established antidepressant which possesses tolerability and safety advantages over the tricyclic agents. The available cost analyses show that these benefits can be obtained without additional overall cost to the healthcare provider. Cost advantages observed to date for fluoxetine over other SSRIs require confirmation.

THE ADVANTAGES OF FEMTOSECOND LASER-ASSISTED CATARACT SURGERY

PubMed Central

Gavris, M Monica; Belicioiu, Roxana; Olteanu, Ioana; Horge, Ioan

2015-01-01

Purpose: To present the advantages of performing femtosecond laser-assisted (Alcon-LenSx Inc.) cataract surgery. Methods: Cataract surgery was performed with the LenSx femtosecond laser (Alcon-LenSx Inc.) in 50 eyes of 50 patients. The laser was programmed to perform a 4,9-4,5 mm capsulorhexis, a 2,3 mm main corneal incision, two 1,3 mm side-port incisions and either a hybrid-pattern or a cylinder-pattern fragmentation of the nucleus. The evaluated parameters were the capsulotomy, the corneal wounds and the nucleus fragmentation. Phacoemulsification of the nucleus and aspiration of the cortex were performed with the Alcon Centurion Vision System and monofocal, toric and multifocal IOLs were successfully implanted. Results: A continuous, central, curvilinear capsulorhexis was performed in 48 cases, 96% (free-floating capsulotomy). In 2 cases, micro-adhesions were reported and detached with the Utrata forceps. Femtolaser capsulotomy resulted in a complete overlap of the anterior capsule over the IOL optics in all cases. Horizontal decentration was found in 2 cases, 4% and vertical decentration in 1 case, 2%. The main corneal incision was self-sealing in 49 cases, 98%. Sutures were used in 1 case, 2%. The hybrid pattern of nucleus fragmentation was used in 42 cases, 84% and the cylindrical pattern in 8 cases, 16%. The fragmentation was incomplete in one case of white cataract and in one case of traumatic cataract. Conclusions: The main advantages of femtolaser cataract surgery are standardized corneal incisions, perfectly centered, round capsulorhexis, and lens nucleus fragmentation even in eyes with hard cataracts. The laser precision is due to the real time OCT software programs, which cover the whole anterior segment, up to the posterior lens capsule. PMID:27373114

Less Intense Postacute Care, Better Outcomes For Enrollees In Medicare Advantage Than Those In Fee-For-Service

PubMed Central

Huckfeldt, Peter J.; Escarce, Jose J.; Rabideau, Brendan; Karaca-Mandic, Pinar; Sood, Neeraj

2017-01-01

Traditional fee-for-service (FFS) Medicare’s prospective payment systems for postacute care provide little incentive to coordinate care or control costs. In contrast, Medicare Advantage plans pay for postacute care out of monthly capitated payments and thus have stronger incentives to use it efficiently. We compared the use of postacute care in skilled nursing and inpatient rehabilitation facilities by enrollees in Medicare Advantage and FFS Medicare after hospital discharge for three high-volume conditions: lower extremity joint replacement, stroke, and heart failure. After accounting for differences in patient characteristics at discharge, we found lower intensity of postacute care for Medicare Advantage patients compared to FFS Medicare patients discharged from the same hospital, across all three conditions. Medicare Advantage patients also exhibited better outcomes than their FFS Medicare counterparts, including lower rates of hospital readmission and higher rates of return to the community. These findings suggest that payment reforms such as bundling in FFS Medicare may reduce the intensity of postacute care without adversely affecting patient health. PMID:28069851

Less Intense Postacute Care, Better Outcomes For Enrollees In Medicare Advantage Than Those In Fee-For-Service.

PubMed

Huckfeldt, Peter J; Escarce, José J; Rabideau, Brendan; Karaca-Mandic, Pinar; Sood, Neeraj

2017-01-01

Traditional fee-for-service (FFS) Medicare's prospective payment systems for postacute care provide little incentive to coordinate care or control costs. In contrast, Medicare Advantage plans pay for postacute care out of monthly capitated payments and thus have stronger incentives to use it efficiently. We compared the use of postacute care in skilled nursing and inpatient rehabilitation facilities by enrollees in Medicare Advantage and FFS Medicare after hospital discharge for three high-volume conditions: lower extremity joint replacement, stroke, and heart failure. After accounting for differences in patient characteristics at discharge, we found lower intensity of postacute care for Medicare Advantage patients compared to FFS Medicare patients discharged from the same hospital, across all three conditions. Medicare Advantage patients also exhibited better outcomes than their FFS Medicare counterparts, including lower rates of hospital readmission and higher rates of return to the community. These findings suggest that payment reforms such as bundling in FFS Medicare may reduce the intensity of postacute care without adversely affecting patient health. Project HOPE—The People-to-People Health Foundation, Inc.

Atomic Force Microscopy Techniques for Nanomechanical Characterization: A Polymeric Case Study

NASA Astrophysics Data System (ADS)

Reggente, Melania; Rossi, Marco; Angeloni, Livia; Tamburri, Emanuela; Lucci, Massimiliano; Davoli, Ivan; Terranova, Maria Letizia; Passeri, Daniele

2015-04-01

Atomic force microscopy (AFM) is a versatile tool to perform mechanical characterization of surface samples at the nanoscale. In this work, we review two of such methods, namely contact resonance AFM (CR-AFM) and torsional harmonics AFM (TH-AFM). First, such techniques are illustrated and their applicability on materials with elastic moduli in different ranges are discussed, together with their main advantages and limitations. Then, a case study is presented in which we report the mechanical characterization using both CR-AFM and TH-AFM of polyaniline and polyaniniline doped with nanodiamond particles tablets prepared by a pressing process. We determined the indentation modulus values of their surfaces, which were found in fairly good agreement, thus demonstrating the accuracy of the techniques. Finally, the determined surface elastic moduli have been compared with the bulk ones measured through standard indentation testing.

Comparison of display enhancement with intelligent decision-aiding

NASA Technical Reports Server (NTRS)

Kirlik, Alex; Markert, Wendy J.; Kossack, Merrick

1992-01-01

Currently, two main approaches exist for improving the human-machine interface component of a system in order to improve overall system performance, display enhancement and intelligent decision aiding. Each of these two approaches has its own set of advantages and disadvantages, as well as introduce its own set of additional performance problems. These characteristics should help identify which types of problem situations and domains are better aided by which type of strategy. The characteristic issues are described of these two decision aiding strategies. Then differences in expert and novice decision making are described in order to help determine whether a particular strategy may be better for a particular type of user. Finally, research is outlined to compare and contrast the two technologies, as well as to examine the interaction effects introduced by the different skill levels and the different methods for training operators.

Tocilizumab (Actemra).

PubMed

Sheppard, Martin; Laskou, Faidra; Stapleton, Philip P; Hadavi, Shahryar; Dasgupta, Bhaskar

2017-09-02

Tocilizumab (TCZ), is a recombinant humanized anti-interleukin-6 receptor (IL-6R) monoclonal antibody which has a main use in the treatment of rheumatoid arthritis, systemic juvenile idiopathic arthritis (sJIA) and polyarticular juvenile idiopathic arthritis (pJIA). This article provides an overview of TCZ including looking into the past at the discovery of interleukin-6 (IL-6) as a pro-inflammatory cytokine. It also looks at how tocilizumab was developed, manufactured and tested to ensure both safety and efficacy in a human population. The article then explores the advantages and disadvantages of using TCZ when compared to other biologics approved in RA, sJIA and pJIA and finally looks ahead to the future and the emerging role of IL-6 and its blockade by TCZ as a treatment for giant cell arteritis (GCA), polymyalgia rheumatica (PMR) and large vessel vasculitis (LVV).

[Advances of studies on new technology and method for identifying traditional Chinese medicinal materials].

PubMed

Chen, Shilin; Guo, Baolin; Zhang, Guijun; Yan, Zhuyun; Luo, Guangming; Sun, Suqin; Wu, Hezhen; Huang, Linfang; Pang, Xiaohui; Chen, Jianbo

2012-04-01

In this review, the authors summarized the new technologies and methods for identifying traditional Chinese medicinal materials, including molecular identification, chemical identification, morphological identification, microscopic identification and identification based on biological effects. The authors introduced the principle, characteristics, application and prospect on each new technology or method and compared their advantages and disadvantages. In general, new methods make the result more objective and accurate. DNA barcoding technique and spectroscopy identification have their owner obvious strongpoint in universality and digitalization. In the near future, the two techniques are promising to be the main trend for identifying traditional Chinese medicinal materials. The identification techniques based on microscopy, liquid chromatography, PCR, biological effects and DNA chip will be indispensable supplements. However, the bionic identification technology is just placed in the developing stage at present.

TOPICAL REVIEW: Tribology of dental materials: a review

NASA Astrophysics Data System (ADS)

Zhou, Z. R.; Zheng, J.

2008-06-01

The application of tribology in dentistry is a growing and rapidly expanding field. Intensive research has been conducted to develop an understanding of dental tribology for successful design and selection of artificial dental materials. In this paper, the anatomy and function of human teeth is presented in brief, three types of current artificial dental materials are summarized, and their advantages and disadvantages, as well as typical clinical applications, are compared based on the literature. Possible tribological damage of tooth structure, which is induced by complex interfacial motion, and friction-wear test methods are reported. According to results obtained by the authors and from the literature, the main progress in the area of dental tribology on both natural teeth and artificial dental materials is reviewed. Problems and challenges are discussed and future research directions for dental tribology are recommended.

Performance Evaluation of an Expanded Range XIPS Ion Thruster System for NASA Science Missions

NASA Technical Reports Server (NTRS)

Oh, David Y.; Goebel, Dan M.

2006-01-01

This paper examines the benefit that a solar electric propulsion (SEP) system based on the 5 kW Xenon Ion Propulsion System (XIPS) could have for NASA's Discovery class deep space missions. The relative cost and performance of the commercial heritage XIPS system is compared to NSTAR ion thruster based systems on three Discovery class reference missions: 1) a Near Earth Asteroid Sample Return, 2) a Comet Rendezvous and 3) a Main Belt Asteroid Rendezvous. It is found that systems utilizing a single operating XIPS thruster provides significant performance advantages over a single operating NSTAR thruster. In fact, XIPS performs as well as systems utilizing two operating NSTAR thrusters, and still costs less than the NSTAR system with a single operating thruster. This makes XIPS based SEP a competitive and attractive candidate for Discovery class science missions.

Terrestrial Environmental Variables Derived From EOS Platform Sensors

NASA Technical Reports Server (NTRS)

Stadler, Stephen J.; Czajkowski, Kevin P.; Goward, Samuel N.; Xue, Yongkang

2001-01-01

The three main objectives of the overall project were: 1. Adaptation of environmental constraint methods to take advantage of EOS sensors, specifically, MODIS, ASTER, and Landsat-7, in addition to the PM AVHRR observations 2. Refinement of environmental constraint methods based on fundamental scientific knowledge. 3. Assessment of spatial scaling patterns in environmental constraint measurements to evaluate the potential biases and errors that occur when estimating regional and global-scale NPP patterns with moderate to coarse satellite observations. These goals were modified because, on one hand, MODIS data did not become available until after the first year of the project and because of project staffing issues at the University of Maryland., The OSU portion of the project contained a modest amount of funding and responsibility compared to the University of Maryland and the University of Toledo.

A fast exact simulation method for a class of Markov jump processes.

PubMed

Li, Yao; Hu, Lili

2015-11-14

A new method of the stochastic simulation algorithm (SSA), named the Hashing-Leaping method (HLM), for exact simulations of a class of Markov jump processes, is presented in this paper. The HLM has a conditional constant computational cost per event, which is independent of the number of exponential clocks in the Markov process. The main idea of the HLM is to repeatedly implement a hash-table-like bucket sort algorithm for all times of occurrence covered by a time step with length τ. This paper serves as an introduction to this new SSA method. We introduce the method, demonstrate its implementation, analyze its properties, and compare its performance with three other commonly used SSA methods in four examples. Our performance tests and CPU operation statistics show certain advantages of the HLM for large scale problems.

Air Bearings Machined On Ultra Precision, Hydrostatic CNC-Lathe

NASA Astrophysics Data System (ADS)

Knol, Pierre H.; Szepesi, Denis; Deurwaarder, Jan M.

1987-01-01

Micromachining of precision elements requires an adequate machine concept to meet the high demand of surface finish, dimensional and shape accuracy. The Hembrug ultra precision lathes have been exclusively designed with hydrostatic principles for main spindle and guideways. This concept is to be explained with some major advantages of hydrostatics compared with aerostatics at universal micromachining applications. Hembrug has originally developed the conventional Mikroturn ultra precision facing lathes, for diamond turning of computer memory discs. This first generation of machines was followed by the advanced computer numerically controlled types for machining of complex precision workpieces. One of these parts, an aerostatic bearing component has been succesfully machined on the Super-Mikroturn CNC. A case study of airbearing machining confirms the statement that a good result of the micromachining does not depend on machine performance alone, but also on the technology applied.

A tubular hybrid Halbach/axially-magnetized permanent-magnet linear machine

NASA Astrophysics Data System (ADS)

Sui, Yi; Liu, Yong; Cheng, Luming; Liu, Jiaqi; Zheng, Ping

2017-05-01

A single-phase tubular permanent-magnet linear machine (PMLM) with hybrid Halbach/axially-magnetized PM arrays is proposed for free-piston Stirling power generation system. Machine topology and operating principle are elaborately illustrated. With the sinusoidal speed characteristic of the free-piston Stirling engine considered, the proposed machine is designed and calculated by finite-element analysis (FEA). The main structural parameters, such as outer radius of the mover, radial length of both the axially-magnetized PMs and ferromagnetic poles, axial length of both the middle and end radially-magnetized PMs, etc., are optimized to improve both the force capability and power density. Compared with the conventional PMLMs, the proposed machine features high mass and volume power density, and has the advantages of simple control and low converter cost. The proposed machine topology is applicable to tubular PMLMs with any phases.

Troxacitabine prodrugs for pancreatic cancer.

PubMed

Adema, A D; Radi, M; Daft, J; Narayanasamy, J; Hoebe, E K; Alexander, L E; Chu, C K; Peters, G J

2007-01-01

Troxacitabine is a cytotoxic deoxycytidine analogue with an unnatural L-configuration, which is activated by deoxycytidine kinase (dCK). The configuration is responsible for differences in the uptake and metabolism of troxacitabine compared to other deoxynucleoside analogues. The main drawback in the use of most nucleoside anticancer agents originates from their hydrophilic nature, which property requires a high and frequent dosage for an intravenous administration. To overcome this problem several troxacitabine prodrugs modified in the aminogroup with a linear aliphatic chain with a higher lipophilicity were developed. To determine whether these prodrugs have an advantage over Troxacitabine pancreatic cancer cell lines were exposed to Troxacitabine and the lipophilic prodrugs. The addition of linear aliphatic chains to troxacitabine increased sensitivity of pancreatic cancer cell lines to the drug > 100-fold, possibly due to a better uptake and retention of the drug.

The design of multi-core DSP parallel model based on message passing and multi-level pipeline

NASA Astrophysics Data System (ADS)

Niu, Jingyu; Hu, Jian; He, Wenjing; Meng, Fanrong; Li, Chuanrong

2017-10-01

Currently, the design of embedded signal processing system is often based on a specific application, but this idea is not conducive to the rapid development of signal processing technology. In this paper, a parallel processing model architecture based on multi-core DSP platform is designed, and it is mainly suitable for the complex algorithms which are composed of different modules. This model combines the ideas of multi-level pipeline parallelism and message passing, and summarizes the advantages of the mainstream model of multi-core DSP (the Master-Slave model and the Data Flow model), so that it has better performance. This paper uses three-dimensional image generation algorithm to validate the efficiency of the proposed model by comparing with the effectiveness of the Master-Slave and the Data Flow model.

Greenhouse intelligent control system based on microcontroller

NASA Astrophysics Data System (ADS)

Zhang, Congwei

2018-04-01

As one of the hallmarks of agricultural modernization, intelligent greenhouse has the advantages of high yield, excellent quality, no pollution and continuous planting. Taking AT89S52 microcontroller as the main controller, the greenhouse intelligent control system uses soil moisture sensor, temperature and humidity sensors, light intensity sensor and CO2 concentration sensor to collect measurements and display them on the 12864 LCD screen real-time. Meantime, climate parameter values can be manually set online. The collected measured values are compared with the set standard values, and then the lighting, ventilation fans, warming lamps, water pumps and other facilities automatically start to adjust the climate such as light intensity, CO2 concentration, temperature, air humidity and soil moisture of the greenhouse parameter. So, the state of the environment in the greenhouse Stabilizes and the crop grows in a suitable environment.

Positioning navigation and timing service applications in cyber physical systems

NASA Astrophysics Data System (ADS)

Qu, Yi; Wu, Xiaojing; Zeng, Lingchuan

2017-10-01

The positioning navigation and timing (PNT) architecture was discussed in detail, whose history, evolvement, current status and future plan were presented, main technologies were listed, advantages and limitations of most technologies were compared, novel approaches were introduced, and future capacities were sketched. The concept of cyber-physical system (CPS) was described and their primary features were interpreted. Then the three-layer architecture of CPS was illustrated. Next CPS requirements on PNT services were analyzed, including requirements on position reference and time reference, requirements on temporal-spatial error monitor, requirements on dynamic services, real-time services, autonomous services, security services and standard services. Finally challenges faced by PNT applications in CPS were concluded. The conclusion was expected to facilitate PNT applications in CPS, and furthermore to provide references to the design and implementation of both architectures.

A chaotic secure communication scheme using fractional chaotic systems based on an extended fractional Kalman filter

NASA Astrophysics Data System (ADS)

Kiani-B, Arman; Fallahi, Kia; Pariz, Naser; Leung, Henry

2009-03-01

In recent years chaotic secure communication and chaos synchronization have received ever increasing attention. In this paper, for the first time, a fractional chaotic communication method using an extended fractional Kalman filter is presented. The chaotic synchronization is implemented by the EFKF design in the presence of channel additive noise and processing noise. Encoding chaotic communication achieves a satisfactory, typical secure communication scheme. In the proposed system, security is enhanced based on spreading the signal in frequency and encrypting it in time domain. In this paper, the main advantages of using fractional order systems, increasing nonlinearity and spreading the power spectrum are highlighted. To illustrate the effectiveness of the proposed scheme, a numerical example based on the fractional Lorenz dynamical system is presented and the results are compared to the integer Lorenz system.

Statistical Models for Averaging of the Pump–Probe Traces: Example of Denoising in Terahertz Time-Domain Spectroscopy

NASA Astrophysics Data System (ADS)

Skorobogatiy, Maksim; Sadasivan, Jayesh; Guerboukha, Hichem

2018-05-01

In this paper, we first discuss the main types of noise in a typical pump-probe system, and then focus specifically on terahertz time domain spectroscopy (THz-TDS) setups. We then introduce four statistical models for the noisy pulses obtained in such systems, and detail rigorous mathematical algorithms to de-noise such traces, find the proper averages and characterise various types of experimental noise. Finally, we perform a comparative analysis of the performance, advantages and limitations of the algorithms by testing them on the experimental data collected using a particular THz-TDS system available in our laboratories. We conclude that using advanced statistical models for trace averaging results in the fitting errors that are significantly smaller than those obtained when only a simple statistical average is used.

[Electronic cigarette : state of the science about toxicological aspects].

PubMed

Deville, M; Charlier, C

2017-01-01

Electronic cigarettes (e-cigarettes) are presented as a healthier alternative to tobacco smoking. They are designed to contain a solution which is heated to produce an aerosol inhaled by the user. The liquid is mainly composed of propylene glycol, glycerol, flavours and, in some cases, nicotine. Except for nicotine, which can be fatal when ingested at high dose, these components are generally considered as safe. However, the potential effect of long term exposure to inhaled propylene glycol is unknown at this time. As an advantage, toxic compounds responsible for the noxiousness of tobacco smoking (nitrosamines, metals, formaldehyde, carbon monoxide …) are either absent, or present in the smoke of e-cigarette at levels far less compared to conventional cigarette smoke. Finally, efficacy of e-cigarette as a tool for smoking cessation stays to be proven.

Surface modification of polymeric foams for oil spills remediation.

PubMed

Pinto, Javier; Athanassiou, Athanassia; Fragouli, Despina

2018-01-15

In the last decade, a continuous increasing research activity is focused on the surface functionalization of polymeric porous materials for the efficient removal of oil contaminants from water. This work reviews the most significant recent studies on the functionalization of polyurethane and melamine foams, materials commonly reported for oil-water separation applications. After the identification of the key features of the foams required to optimize their oil removal performance, a wide variety of physicochemical treatments are described together with their effect on the oil absorption selectivity and oil absorption capacity, both critical parameters for the application of the foams in the remediation of oil spills. The efficiencies of the different functionalization processes on the same type of foams are compared, determining the main advantages and potentialities of each treatment and remediation procedure. Copyright © 2017 Elsevier Ltd. All rights reserved.

Competitive advantage of diferric transferrin in delivering iron to reticulocytes.

PubMed Central

Huebers, H A; Csiba, E; Huebers, E; Finch, C A

1983-01-01

Radioiron- and radioiodine-labeled forms of human diferric and monoferric transferrin and apotransferrin, isolated by preparative isoelectric focusing, were used to define transferrin-iron uptake by human reticulocytes. In mixtures of human diferric and monoferric transferrin, the diferric molecule had a constant 7-fold advantage in delivering iron to reticulocytes, as compared with the 2-fold advantage when single solutions of mono- and diferric transferrins were compared. This was shown to be due to competitive interaction in iron delivery, probably at a common membrane-receptor binding site for transferrin. Apotransferrin did not interfere with the iron-donating process and its limited cellular uptake was inhibited in noncompetitive fashion by diferric transferrin. PMID:6572005

A visual short-term memory advantage for objects of expertise

PubMed Central

Curby, Kim M.; Glazek, Kuba; Gauthier, Isabel

2014-01-01

Visual short-term memory (VSTM) is limited, especially for complex objects. Its capacity, however, is greater for faces than for other objects, an advantage that may stem from the holistic nature of face processing. If the holistic processing explains this advantage, then object expertise—which also relies on holistic processing—should endow experts with a VSTM advantage. We compared VSTM for cars among car experts to that among car novices. Car experts, but not car novices, demonstrated a VSTM advantage similar to that for faces; this advantage was orientation-specific and was correlated with an individual's level of car expertise. Control experiments ruled out accounts based solely on verbal- or long-term memory representations. These findings suggest that the processing advantages afforded by visual expertise result in domain-specific increases in VSTM capacity, perhaps by allowing experts to maximize the use of an inherently limited VSTM system. PMID:19170473

Data analysis considerations

USDA-ARS?s Scientific Manuscript database

For the last 30 years static chamber methodologies have been most commonly used to measure N2O fluxes from agricultural soils. The main advantages of this technique are that it is relatively inexpensive, versatile in the field, and the technology is very easy to adopt. Consequently, the majority of ...

Development and validation of micellar liquid chromatographic methods for the determination of antibiotics in different matrixes.

PubMed

Rambla-Alegre, Maria; Esteve-Romero, Josep; Carda-Broch, Samuel

2011-01-01

Antibiotics are the most important bioactive and chemotherapeutic compounds to be produced by microbiological synthesis, and they have proved their worth in a variety of fields, such as medicinal chemistry, agriculture, and the food industry. Interest in antibiotics has grown in parallel with an increasingly high degree of productivity in the field of analytical applications. Therefore, it is necessary to develop chromatographic procedures capable of determining various drugs simultaneously in the shortest possible time. Micellar liquid chromatography (MLC) is an RP-HPLC technique that offers advantages over conventional HPLC as far as sample preparation, selectivity, and versatility are concerned. Its main advantage is that samples can be injected directly into the chromatographic system with no previous preparation step. This paper mainly focuses on the results of the authors' own recent research and reports the chromatographic conditions for determination of various antibiotics (penicillins, quinolones, and sulfonamides) in different matrixes (pharmaceuticals, biological fluids, and food). The work of other authors on MLC-based antibiotic determination has been included.

Crystal Growth by Physical Vapor Transport: Experiments and Simulation Dynamics

NASA Technical Reports Server (NTRS)

Ramachandran, N.; Worlikar, A.; Su, Ching-Hua; Rose, M. Franklin (Technical Monitor)

2001-01-01

Crystal growth from the vapor phase has various advantages over melt growth. The main advantage is from a lower processing temperature, which makes the process more amenable in instances where the melting temperature of the crystal is high. Other benefits stem from the inherent purification mechanism in the process due to differences in the vapor pressures of the native elements and impurities, and the enhanced interfacial morphological stability during the growth process. Further, the implementation of PVT growth in closed ampoules affords experimental simplicity with minimal needs for complex process control, which makes it an ideal candidate for space investigations in systems where gravity tends to have undesirable effects on the growth process. Bulk growth of wide band gap II-VI semiconductors by PVT has been developed and refined over the past several years at NASA MSFC. A new modeling approach for PVT has also been recently formulated and its validation and testing is the main objective of this work.

Use of ultrasounds in the food industry-Methods and effects on quality, safety, and organoleptic characteristics of foods: A review.

PubMed

Arvanitoyannis, Ioannis S; Kotsanopoulos, Konstantinos V; Savva, Amalia G

2017-01-02

The use of ultrasounds has recently gained significant interest in the food industry mainly due to the new trends of consumers toward functional foods. Offering several advantages, this form of energy can be applied for the improvement of qualitative characteristics of high-quality foods as well as for assuring safety of a vast variety of foodstuffs, and at the same time minimizing any negative effects of the sensory characteristics of foods. Furthermore, the non-destructive nature of this technology offers several opportunities for the compositional analysis of foods. However, further research is required for the improvement of related techniques and the reduction of application costs in order to render this technology efficient for industrial use. This review paper covers the main applications of ultrasounds as well as several advantages of the use of the technology in combination with conventional techniques. The effects of ultrasounds on the characteristics, microbial safety, and quality of several foods are also detailed.

Ultrasound: a subexploited tool for sample preparation in metabolomics.

PubMed

Luque de Castro, M D; Delgado-Povedano, M M

2014-01-02

Metabolomics, one of the most recently emerged "omics", has taken advantage of ultrasound (US) to improve sample preparation (SP) steps. The metabolomics-US assisted SP step binomial has experienced a dissimilar development that has depended on the area (vegetal or animal) and the SP step. Thus, vegetal metabolomics and US assisted leaching has received the greater attention (encompassing subdisciplines such as metallomics, xenometabolomics and, mainly, lipidomics), but also liquid-liquid extraction and (bio)chemical reactions in metabolomics have taken advantage of US energy. Also clinical and animal samples have benefited from US assisted SP in metabolomics studies but in a lesser extension. The main effects of US have been shortening of the time required for the given step, and/or increase of its efficiency or availability for automation; nevertheless, attention paid to potential degradation caused by US has been scant or nil. Achievements and weak points of the metabolomics-US assisted SP step binomial are discussed and possible solutions to the present shortcomings are exposed. Copyright © 2013 Elsevier B.V. All rights reserved.

Performance investigations on modified vertical axis water turbine: Combination of lift and drag

NASA Astrophysics Data System (ADS)

Baumatary, Mithinga; Biswas, Angimitra; Misra, Rahul Dev

2018-04-01

Extracting energy from the water has been followed since decades due to environmental friendly. Now a days everyone is running after clean energy, therefore extracting energy from the water turbine is a good approach. The main idea of this study is to investigate the performance of a new design turbine which is a combination of the concepts of lift and drag turbine. The main purpose of the study is to accumulate maximum energy by considering advantages of two different types of turbine. The maximum coefficient of power is 0.141 at free stream velocity of 0.5 m/s. The modified new design turbine consist of straight section and the curve section. The length of the straight section influences the performance of the turbine. Investigation on the optimization of straight section has been carried out in this paper. As this type of turbine have opted the advantages of both lift and drag it has turned out to be fruitful.

X-ray radiation detectors of ``scintillator-photoreceiving device type'' for industrial digital radiography with improved spatial resolution

NASA Astrophysics Data System (ADS)

Ryzhykov, V. D.; Lysetska, O. K.; Opolonin, O. D.; Kozin, D. N.

2003-06-01

Main types of photoreceivers used in X-ray digital radiography systems are luminescent screens that transfer the optical image onto charge collection instruments, which require cooling, and semiconductor silicon detectors, which limit the contrast sensitivity. We have developed and produced X-ray radiation detectors of "scintillator-photoreceiving device" (S-PRD) type, which are integrally located on the inverse side of the photodiode (PD). The receiving-converting circuit (RCC) is designed for data conversion into digital form and their input into PC. Software is provided for RCC control and image visualization. Main advantages of these detectors are high industrial resolution (3-5 line pairs per mm), detecting activity up to 20 μm, controlled sensitivity, low weight and small size, imaging low (0.1-0.3 mrad) object dose in real time. In this work, main characteristics of 32-, 64- and 1024-channel detectors of S-PRD type were studied and compared for X-ray sensitivity with S-PD detectors. Images of the tested objects have been obtained. Recommendations are given on the use of different scintillation materials, depending upon the purpose of a digital radiographic system. The detectors operate in a broad energy range of ionizing radiation, hence the size of the controlled object is not limited. The system is sufficiently powerful to ensure frontal (through two walls) observation of pipelines with wall thickness up to 10 cm.

An Empirical Analysis of the Effectiveness of Design-Build Construction Contracts

DTIC Science & Technology

1993-08-01

features and benefits with traditional design/bid/build. Several types of design/build organizations are examined, with their relative advantages and... benefits transferable to government contracting? Perhaps the most logical approach would be to compare point by point the various advantages and...consider to be critical to their competitive advantage in the market. This paper opens with a review of the development of design/build, then contrasts its

Breast cancer survival in Canada and the USA: meta-analytic evidence of a Canadian advantage in low-income areas.

PubMed

Gorey, Kevin M

2009-12-01

This study tested the hypothesis that relatively poor Canadian women with breast cancer have a survival advantage over their counterparts in the USA. Seventy-eight independent retrospective cohort (incidence between 1984 and 2000, followed until 2006) outcomes were synthesized. Fixed effects meta-regression models compared women with breast cancer in low-income areas of Canada and the USA. Low-income Canadian women were advantaged on survival [rate ratio (RR) = 1.14; 95% confidence interval (CI) 1.13-1.15] and their advantage was even larger among women <65 years of age who are not yet eligible for Medicare coverage in the USA (RR = 1.21, 95% CI 1.18-1.24). Canadian advantages were also larger for node positive breast cancer, which may present with greater clinical and managerial discretion (RR = 1.40, 95% CI 1.30-1.50), and smaller when Hawaii, the state providing the most Canadian-like access, was the US comparator (RR = 1.12, 95% CI 1.01-1.20). More inclusive health care insurance coverage in Canada vs the USA, particularly among each country's relatively poor people, seems the most plausible explanation for such Canadian advantages. Provision of health care for all Americans would likely prevent countless early deaths, particularly among the relatively poor.

Escitalopram—translating molecular properties into clinical benefit: reviewing the evidence in major depression

PubMed Central

Leonard, Brian; Taylor, David

2010-01-01

The majority of currently marketed drugs contain a mixture of enantiomers; however, recent evidence suggests that individual enantiomers can have pharmacological properties that differ importantly from enantiomer mixtures. Escitalopram, the S-enantiomer of citalopram, displays markedly different pharmacological activity to the R-enantiomer. This review aims to evaluate whether these differences confer any significant clinical advantage for escitalopram over either citalopram or other frequently used antidepressants. Searches were conducted using PubMed and EMBASE (up to January 2009). Abstracts of the retrieved studies were reviewed independently by both authors for inclusion. Only those studies relating to depression or major depressive disorder were included. The search identified over 250 citations, of which 21 studies and 18 pooled or meta-analyses studies were deemed suitable for inclusion. These studies reveal that escitalopram has some efficacy advantage over citalopram and paroxetine, but no consistent advantage over other selective serotonin reuptake inhibitors. Escitalopram has at least comparable efficacy to available serotonin-norepinephrine reuptake inhibitors, venlafaxine XR and duloxetine, and may offer some tolerability advantages over these agents. This review suggests that the mechanistic advantages of escitalopram over citalopram translate into clinical efficacy advantages. Escitalopram may have a favourable benefit-risk ratio compared with citalopram and possibly with several other antidepressant agents. PMID:20147575

A New Method of Comparing Forcing Agents in Climate Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kravitz, Benjamin S.; MacMartin, Douglas; Rasch, Philip J.

We describe a new method of comparing different climate forcing agents (e.g., CO2, CH4, and solar irradiance) that avoids many of the ambiguities introduced by temperature-related climate feedbacks. This is achieved by introducing an explicit feedback loop external to the climate model that adjusts one forcing agent to balance another while keeping global mean surface temperature constant. Compared to current approaches, this method has two main advantages: (i) the need to define radiative forcing is bypassed and (ii) by maintaining roughly constant global mean temperature, the effects of state dependence on internal feedback strengths are minimized. We demonstrate this approachmore » for several different forcing agents and derive the relationships between these forcing agents in two climate models; comparisons between forcing agents are highly linear in concordance with predicted functional forms. Transitivity of the relationships between the forcing agents appears to hold within a wide range of forcing. The relationships between the forcing agents obtained from this method are consistent across both models but differ from relationships that would be obtained from calculations of radiative forcing, highlighting the importance of controlling for surface temperature feedback effects when separating radiative forcing and climate response.« less

Comparison of 39 post-traumatic tibia bone transports performed with and without the use of an intramedullary rod: the long-term outcomes.

PubMed

Liodakis, Emmanouil; Kenawey, Mohamed; Krettek, Christian; Wiebking, Ulrich; Hankemeier, Stefan

2011-09-01

Bone transport can be performed with an external fixator alone or with the monorail technique which entails the combination of a fixator and an intramedullary nail. The purpose of this study was to compare the complication rates and long-term outcomes of these methods. Two groups of patients, the external fixator (n = 21) and the monorail group (n = 18), were compared. The average follow-up period was 7.9 ± 5.6 years and the mean defect length 8.3 ± 3.1 cm. Healing was achieved in 19 (90%) and 13 (72%) of the fixator and monorail patients, respectively. Six patients underwent amputations because of persistent infections (two in the fixator and four in the monorail group). The rate of deformities was significantly higher in the fixator group (p = 0.049). No statistically significant difference was found when comparing categories of the SF-36 test or the ability to work or do sports. The main advantages of the monorail method are reduction of the external fixation time and the lower rate of deformities. However, the authors recommend segmental transport with external fixator in patients with chronic infections.

A Review of Multivariate Distributions for Count Data Derived from the Poisson Distribution.

PubMed

Inouye, David; Yang, Eunho; Allen, Genevera; Ravikumar, Pradeep

2017-01-01

The Poisson distribution has been widely studied and used for modeling univariate count-valued data. Multivariate generalizations of the Poisson distribution that permit dependencies, however, have been far less popular. Yet, real-world high-dimensional count-valued data found in word counts, genomics, and crime statistics, for example, exhibit rich dependencies, and motivate the need for multivariate distributions that can appropriately model this data. We review multivariate distributions derived from the univariate Poisson, categorizing these models into three main classes: 1) where the marginal distributions are Poisson, 2) where the joint distribution is a mixture of independent multivariate Poisson distributions, and 3) where the node-conditional distributions are derived from the Poisson. We discuss the development of multiple instances of these classes and compare the models in terms of interpretability and theory. Then, we empirically compare multiple models from each class on three real-world datasets that have varying data characteristics from different domains, namely traffic accident data, biological next generation sequencing data, and text data. These empirical experiments develop intuition about the comparative advantages and disadvantages of each class of multivariate distribution that was derived from the Poisson. Finally, we suggest new research directions as explored in the subsequent discussion section.

Negative pressure wound therapy in pediatric surgery: How and when to use.

PubMed

de Jesus, Lisieux Eyer; Martins, Alana Bandeira; Oliveira, Pablo Baptista; Gomes, Fernanda; Leve, Thais; Dekermacher, Samuel

2018-04-01

Negative pressure wound therapy (NPWT) has been widely adopted to treat laparostomy, abdominal compartment syndrome (ACS) and complicated wounds associated with tissue loss. The method presents specific aspects, advantages and indications in Pediatrics. Our aim is to review the evidence available about NPWT in children. Active search for papers about NPWT in Pediatric patients. Papers referring to orthopedic problems, wound complications after Cardiac Surgery or burns were excluded. The method shows good results to treat ACS, complicated wounds and abdominal wall malformations in neonates, including prematures. Periwound skin protection, monitoring of fluid losses and fine tuning of negative pressure levels according to age are necessary. Less pain, quicker recovery, less frequent dressing changes, possible recovery of exposed surgical hardware, granulation and shrinkage of the wound are advantages of the method over other kinds of dressing. NPWT is contraindicated over blood vessels and exposed nerves. Debridement is needed before usage over necrotic areas. Enteric fistulae are not contraindications. Complications are rare, mainly foam retention and dermatitis/skin maceration. The possibility of fistulae being caused by NPWT remains debatable. NPWT is widely used in Pediatrics, including neonates and premature, but the evidence available about the method is scarce and low quality. Complications are uncommon and mostly manageable. A possible causal relationship between NPWY and enteric fistula remains unclear. Adult devices and parameters have been adapted to children's use. Extra care is needed to protect the delicate tissues of Pediatric patients. Comparative research to define differential costs, indications and advantages of the method, specific indications and limits of NWTP in Pediatrics is needed. Review. IV. Copyright © 2017 Elsevier Inc. All rights reserved.

Contribution of chronic conditions to smoking differences in life expectancy with and without disability in Belgium.

PubMed

Yokota, Renata T C; Nusselder, Willma J; Robine, Jean-Marie; Tafforeau, Jean; Charafeddine, Rana; Gisle, Lydia; Deboosere, Patrick; Van Oyen, Herman

2018-06-12

Smoking is the leading cause of premature mortality and morbidity. This study aimed at assessing the impact of smoking on life expectancy (LE) and LE with (LED) and without disability (DFLE). We further estimated the contribution of disability and mortality and their causes to differences in LED and DFLE by smoking. Data on disability, chronic conditions, and smoking from 17 148 participants of the 1997, 2001, 2004 Belgian Health Interview Surveys were used to estimate causes of disability using the attribution method. A 10-year mortality follow-up of survey participants was used. The Sullivan method was applied to estimate LED and DFLE. The contribution of disability and mortality and of causes of disability and death to smoking differences in LED and DFLE was assessed using decomposition methods. Never smokers live longer than daily smokers. DFLE advantage at age 15 of +8.5/+4.3 years (y) in men/women never compared with daily smokers was the result of lower mortality (+6.2y/+3y) and lower disability (2.3y/1.3y). The extra 0.3y/1.6y LED in never smokers was due to lower mortality (+2.6y/+2.9y) and lower disability (-2.3y/-1.3y). Lower mortality from lung/larynx/trachea cancer, chronic respiratory, and ischaemic heart diseases was the main contributor to higher LED and DFLE in never smokers. Lower disability from musculoskeletal conditions in men and chronic respiratory diseases in women increased LED and DFLE in never smokers. Mortality and disability advantage among never smokers contributed to longer DFLE, while mortality advantage contributed to their longer LED.

Bayesian data analysis in observational comparative effectiveness research: rationale and examples.

PubMed

Olson, William H; Crivera, Concetta; Ma, Yi-Wen; Panish, Jessica; Mao, Lian; Lynch, Scott M

2013-11-01

Many comparative effectiveness research and patient-centered outcomes research studies will need to be observational for one or both of two reasons: first, randomized trials are expensive and time-consuming; and second, only observational studies can answer some research questions. It is generally recognized that there is a need to increase the scientific validity and efficiency of observational studies. Bayesian methods for the design and analysis of observational studies are scientifically valid and offer many advantages over frequentist methods, including, importantly, the ability to conduct comparative effectiveness research/patient-centered outcomes research more efficiently. Bayesian data analysis is being introduced into outcomes studies that we are conducting. Our purpose here is to describe our view of some of the advantages of Bayesian methods for observational studies and to illustrate both realized and potential advantages by describing studies we are conducting in which various Bayesian methods have been or could be implemented.

Physical-chemical properties of dental composites and adhesives containing silane-modified SBA-15.

PubMed

Martim, Gedalias Custódio; Kupfer, Vicente Lira; Moisés, Murilo Pereira; Dos Santos, Andressa; Buzzetti, Paulo Henrique Maciel; Rinaldi, Andrelson Wellington; Rubira, Adley Forti; Girotto, Emerson Marcelo

2018-04-01

The aim of this study was to synthesize and characterize mesoporous materials SBA-15 and SBA-15 modified with 3-(methacryloxy)-propyl-trimethoxysilane (MPS) to be used as inorganic filler in restorative dental composites and adhesives, and evaluate the main physical-chemical properties of the resulting material. The SBA-15 and SBA-15/MPS were characterized by FTIR, BET and X-Ray and combined with TEGDMA, bis-GMA and commercial spherical silica to produce dental composites. Afterwards, the mesoporous materials were combined with TEGDMA, bis-GMA and HEMA to make adhesives. To compare the results, composites and adhesives containing only commercial spherical silica were investigated. Some physical-chemical properties such as degree of conversion (DC), flexural strength (FS) and modulus (FM), water sorption and solubility (W sp and W sl ), specific area (BET), and the leachable components were evaluated. The SBA-15/MPS can be used to prepare dental restorative materials, with some foreseeable advantages compared with pure SBA-15 dental materials and with improved properties compared with commercial spherical silica dental materials. An important improvement was that the dental materials based on modified SBA-15 presented a reduction of approximately 60% in leaching of unreacted monomers extracted by solvent compared to the control group. Copyright © 2018 Elsevier Ltd. All rights reserved.

A new model for approximating RNA folding trajectories and population kinetics

NASA Astrophysics Data System (ADS)

Kirkpatrick, Bonnie; Hajiaghayi, Monir; Condon, Anne

2013-01-01

RNA participates both in functional aspects of the cell and in gene regulation. The interactions of these molecules are mediated by their secondary structure which can be viewed as a planar circle graph with arcs for all the chemical bonds between pairs of bases in the RNA sequence. The problem of predicting RNA secondary structure, specifically the chemically most probable structure, has many useful and efficient algorithms. This leaves RNA folding, the problem of predicting the dynamic behavior of RNA structure over time, as the main open problem. RNA folding is important for functional understanding because some RNA molecules change secondary structure in response to interactions with the environment. The full RNA folding model on at most O(3n) secondary structures is the gold standard. We present a new subset approximation model for the full model, give methods to analyze its accuracy and discuss the relative merits of our model as compared with a pre-existing subset approximation. The main advantage of our model is that it generates Monte Carlo folding pathways with the same probabilities with which they are generated under the full model. The pre-existing subset approximation does not have this property.

Determination of depth and size of defects in carbon-fiber-reinforced plastic with different methods of pulse thermography

NASA Astrophysics Data System (ADS)

Popow, Vitalij; Gurka, Martin

2018-03-01

The main advantage of high performance composite material is its exceptional light-weight capability due to individual tailoring of anisotropic fiber lay-up. Its main draw-back is a brittle and complex failure behavior under dynamic loading which requires extensive quality assurance measures and short maintenance intervals. For this reason efficient test methods are required, which not only generate good and reliable results, but are also simple in handling, allow rapid adaptation to different test situations and short measuring times. Especially the knowledge about size and position of a defect is necessary to decide about acceptance or rejection of a structure under investigation. As a promising method for contactless in-line and off-line inspection we used pulsed thermography. For the determination of the depth of the defects we used logarithmic peak second derivative, a widely accepted method. Alternatively an analytical model, describing the adiabatic heating of a solid plate by an instantaneous pulse, was fitted directly to the measurement data. For the determination of defect size four different approaches were investigated and compared with exact values. The measurements were done with continuous carbon-fiber reinforced materials.

Transferrin-Conjugated Nanocarriers as Active-Targeted Drug Delivery Platforms for Cancer Therapy.

PubMed

Nogueira-Librelotto, Daniele R; Codevilla, Cristiane F; Farooqi, Ammad; Rolim, Clarice M B

2017-01-01

A lot of effort has been devoted to achieving active targeting for cancer therapy in order to reach the right cells. Hence, increasingly it is being realized that active-targeted nanocarriers notably reduce off-target effects, mainly because of targeted localization in tumors and active cellular uptake. In this context, by taking advantage of the overexpression of transferrin receptors on the surface of tumor cells, transferrin-conjugated nanodevices have been designed, in hope that the biomarker grafting would help to maximize the therapeutic benefit and to minimize the side effects. Notably, active targeting nanoparticles have shown improved therapeutic performances in different tumor models as compared to their passive targeting counterparts. In this review, current development of nano-based devices conjugated with transferrin for active tumor-targeting drug delivery are highlighted and discussed. The main objective of this review is to provide a summary of the vast types of nanomaterials that have been used to deliver different chemotherapeutics into tumor cells, and to ultimately evaluate the progression on the strategies for cancer therapy in view of the future research. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Method and apparatus for magnetic resonance imaging and spectroscopy using microstrip transmission line coils

DOEpatents

Zhang, Xiaoliang; Ugurbil, Kamil; Chen, Wei

2006-04-04

Apparatus and method for MRI imaging using a coil constructed of microstrip transmission line (MTL coil) are disclosed. In one method, a target is positioned to be imaged within the field of a main magnetic field of a magnet resonance imaging (MRI) system, a MTL coil is positioned proximate the target, and a MRI image is obtained using the main magnet and the MTL coil. In another embodiment, the MRI coil is used for spectroscopy. MRI imaging and spectroscopy coils are formed using microstrip transmission line. These MTL coils have the advantageous property of good performance while occupying a relatively small space, thus allowing MTL coils to be used inside restricted areas more easily than some other prior art coils. In addition, the MTL coils are relatively simple to construct of inexpensive components and thus relatively inexpensive compared to other designs. Further, the MTL coils of the present invention can be readily formed in a wide variety of coil configurations, and used in a wide variety of ways. Further, while the MTL coils of the present invention work well at high field strengths and frequencies, they also work at low frequencies and in low field strengths as well.

Predicting floods with Flickr tags.

PubMed

Tkachenko, Nataliya; Jarvis, Stephen; Procter, Rob

2017-01-01

Increasingly, user generated content (UGC) in social media postings and their associated metadata such as time and location stamps are being used to provide useful operational information during natural hazard events such as hurricanes, storms and floods. The main advantage of these new sources of data are twofold. First, in a purely additive sense, they can provide much denser geographical coverage of the hazard as compared to traditional sensor networks. Second, they provide what physical sensors are not able to do: By documenting personal observations and experiences, they directly record the impact of a hazard on the human environment. For this reason interpretation of the content (e.g., hashtags, images, text, emojis, etc) and metadata (e.g., keywords, tags, geolocation) have been a focus of much research into social media analytics. However, as choices of semantic tags in the current methods are usually reduced to the exact name or type of the event (e.g., hashtags '#Sandy' or '#flooding'), the main limitation of such approaches remains their mere nowcasting capacity. In this study we make use of polysemous tags of images posted during several recent flood events and demonstrate how such volunteered geographic data can be used to provide early warning of an event before its outbreak.

Do we really need sugammadex as an antagonist of muscle relaxants in anesthesia?

PubMed

Meistelman, Claude; Donati, François

2016-08-01

Sugammadex is a selective relaxant-binding agent that is designed to encapsulate rocuronium and chemically similar steroidal muscle relaxants such as vecuronium. This review summarizes recent information on the use of sugammadex in clinical practice. The main advantages of sugammadex when compared with conventional anticholinesterase agents are a much faster recovery time and its unique ability to reverse rapidly and efficiently, for the first time, deep levels of neuromuscular blockade. However, there is paucity of evidence-based studies on the benefit of deep neuromuscular block, and then routine administration of sugammadex to reverse any level of block, for example, during laparoscopic surgery. It appears that reduction of costs depends mainly on organizational factors. Finally it must be remembered that sugammadex only works with steroidal nondepolarizing muscle relaxants; therefore neostigmine should not be withdrawn because it is the only reversal agent effective against atracurium or cisatracurium. Sugammadex offers a significantly faster and more predictable recovery profile than neostigmine. It is now possible to reverse rapidly and efficiently any level of neuromuscular blockade and to avoid the risk of adverse events because of residual paralysis such as critical respiratory events during recovery from anesthesia.

Adaptive vibrational configuration interaction (A-VCI): A posteriori error estimation to efficiently compute anharmonic IR spectra

NASA Astrophysics Data System (ADS)

Garnier, Romain; Odunlami, Marc; Le Bris, Vincent; Bégué, Didier; Baraille, Isabelle; Coulaud, Olivier

2016-05-01

A new variational algorithm called adaptive vibrational configuration interaction (A-VCI) intended for the resolution of the vibrational Schrödinger equation was developed. The main advantage of this approach is to efficiently reduce the dimension of the active space generated into the configuration interaction (CI) process. Here, we assume that the Hamiltonian writes as a sum of products of operators. This adaptive algorithm was developed with the use of three correlated conditions, i.e., a suitable starting space, a criterion for convergence, and a procedure to expand the approximate space. The velocity of the algorithm was increased with the use of a posteriori error estimator (residue) to select the most relevant direction to increase the space. Two examples have been selected for benchmark. In the case of H2CO, we mainly study the performance of A-VCI algorithm: comparison with the variation-perturbation method, choice of the initial space, and residual contributions. For CH3CN, we compare the A-VCI results with a computed reference spectrum using the same potential energy surface and for an active space reduced by about 90%.

Forensic and clinical issues in the use of frangible projectile.

PubMed

Komenda, Jan; Hejna, Petr; Rydlo, Martin; Novák, Miroslav; Krajsa, Jan; Racek, František; Rejtar, Pavel; Jedlička, Luděk

2013-08-01

Frangible projectiles for firearms, which break apart on impact, are mainly used by law enforcement agencies for training purposes, but can also be used for police interventions. Apart from the usual absence of lead in the projectiles, the main advantage of using frangible projectiles is the reduced risk of ricochet after impact with a hard target. This article describes the design and function of frangible projectiles, and describes gunshot wounds caused by ultra-frangible projectiles which fragment after penetration of soft tissues. Shooting experiments performed by the authors confirmed that differences in the geometry and technology of frangible projectiles can significantly modify their wounding effects. Some frangible projectiles have minimal wounding effects because they remain compact after penetration of soft tissues, comparable to standard fully jacketed projectiles. However, a number of ultra-frangible projectiles disintegrate into very small fragments after impact with a soft tissue substitute. In shooting experiments, we found that the terminal behavior of selected ultra-frangible projectiles was similar in a block of ballistic gel and the soft tissues of the hind leg of a pig, except that the degree of disintegration was less in the gel. Copyright © 2013 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Using an image-extended relational database to support content-based image retrieval in a PACS.

PubMed

Traina, Caetano; Traina, Agma J M; Araújo, Myrian R B; Bueno, Josiane M; Chino, Fabio J T; Razente, Humberto; Azevedo-Marques, Paulo M

2005-12-01

This paper presents a new Picture Archiving and Communication System (PACS), called cbPACS, which has content-based image retrieval capabilities. The cbPACS answers range and k-nearest- neighbor similarity queries, employing a relational database manager extended to support images. The images are compared through their features, which are extracted by an image-processing module and stored in the extended relational database. The database extensions were developed aiming at efficiently answering similarity queries by taking advantage of specialized indexing methods. The main concept supporting the extensions is the definition, inside the relational manager, of distance functions based on features extracted from the images. An extension to the SQL language enables the construction of an interpreter that intercepts the extended commands and translates them to standard SQL, allowing any relational database server to be used. By now, the system implemented works on features based on color distribution of the images through normalized histograms as well as metric histograms. Metric histograms are invariant regarding scale, translation and rotation of images and also to brightness transformations. The cbPACS is prepared to integrate new image features, based on texture and shape of the main objects in the image.

An analytical approach to air defense: cost, effectiveness and SWOT analysis of employing fighter aircraft and modern SAM systems

NASA Astrophysics Data System (ADS)

Kus, Orcun; Kocaman, Ibrahim; Topcu, Yucel; Karaca, Volkan

2012-05-01

The problem of defending a specific airspace is among the main issues a military commander to solve. Proper protection of own airspace is crucial for mission success at the battlefield. The military doctrines of most world armed forces involve two main options of defending the airspace. One of them is utilizing formations of fighter aircraft, which is a flexible choice. The second option is deploying modern SAM (Surface to Air Missile) systems, which is more expansive. On the other hand the decision makers are to cope with miscellaneous restrictions such as the budgeting problems. This study defines air defense concept according to modern air warfare doctrine. It considers an air defense scenario over an arbitrary airspace and compares the performance and cost-effectiveness of employing fighter aircraft and SAM systems. It also presents SWOT (Strenghts - Weakness - Opportunities - Threats) analyses of air defense by fighter aircraft and by modern SAMs and tries to point out whichever option is better. We conclude that deploying SAMs has important advantages over using fighter aircraft by means of interception capacity within a given time period and is cost-effective.

Adaptive vibrational configuration interaction (A-VCI): A posteriori error estimation to efficiently compute anharmonic IR spectra.

PubMed

Garnier, Romain; Odunlami, Marc; Le Bris, Vincent; Bégué, Didier; Baraille, Isabelle; Coulaud, Olivier

2016-05-28

A new variational algorithm called adaptive vibrational configuration interaction (A-VCI) intended for the resolution of the vibrational Schrödinger equation was developed. The main advantage of this approach is to efficiently reduce the dimension of the active space generated into the configuration interaction (CI) process. Here, we assume that the Hamiltonian writes as a sum of products of operators. This adaptive algorithm was developed with the use of three correlated conditions, i.e., a suitable starting space, a criterion for convergence, and a procedure to expand the approximate space. The velocity of the algorithm was increased with the use of a posteriori error estimator (residue) to select the most relevant direction to increase the space. Two examples have been selected for benchmark. In the case of H2CO, we mainly study the performance of A-VCI algorithm: comparison with the variation-perturbation method, choice of the initial space, and residual contributions. For CH3CN, we compare the A-VCI results with a computed reference spectrum using the same potential energy surface and for an active space reduced by about 90%.

Evaluation of Anomaly Detection Method Based on Pattern Recognition

NASA Astrophysics Data System (ADS)

Fontugne, Romain; Himura, Yosuke; Fukuda, Kensuke

The number of threats on the Internet is rapidly increasing, and anomaly detection has become of increasing importance. High-speed backbone traffic is particularly degraded, but their analysis is a complicated task due to the amount of data, the lack of payload data, the asymmetric routing and the use of sampling techniques. Most anomaly detection schemes focus on the statistical properties of network traffic and highlight anomalous traffic through their singularities. In this paper, we concentrate on unusual traffic distributions, which are easily identifiable in temporal-spatial space (e.g., time/address or port). We present an anomaly detection method that uses a pattern recognition technique to identify anomalies in pictures representing traffic. The main advantage of this method is its ability to detect attacks involving mice flows. We evaluate the parameter set and the effectiveness of this approach by analyzing six years of Internet traffic collected from a trans-Pacific link. We show several examples of detected anomalies and compare our results with those of two other methods. The comparison indicates that the only anomalies detected by the pattern-recognition-based method are mainly malicious traffic with a few packets.

Advancement in the chemical analysis and quality control of flavonoid in Ginkgo biloba.

PubMed

Liu, Xin-Guang; Wu, Si-Qi; Li, Ping; Yang, Hua

2015-09-10

Flavonoids are the main active constituents in Ginkgo biloba L., which have been suggested to have broad-spectrum free-radical scavenging activities. This review summarizes the recent advances in the chemical analysis of the flavonoids in G. biloba and its finished products (from 2009 to 2014), including chemical composition, sample preparation, separation, detection and different quality criteria. More than 70 kinds of flavonoids have been identified in this plant. In this review, various analytical approaches as well as their chromatographic conditions have been described, and their advantages/disadvantages are also compared. Quantitative analyses of Ginkgo flavonoids applied by most pharmacopeias start with an acidic hydrolysis followed by determination of the resulting aglycones using HPLC. But increasing direct assay of individual flavonol glycosides found that many adulterated products were still qualified by the present tests. To obtain an authentic and applicable analytical approach for quality evaluation of Ginkgo and its finished products, related suggestions and opinions in the recent publications are mainly discussed in this review. This discussion on chemical analyses of Ginkgo flavonoids will also be found as a significant guide for widely varied natural flavonoids. Copyright © 2015 Elsevier B.V. All rights reserved.

A simple and rapid infrared-assisted self enzymolysis extraction method for total flavonoid aglycones extraction from Scutellariae Radix and mechanism exploration.

PubMed

Wang, Liping; Duan, Haotian; Jiang, Jiebing; Long, Jiakun; Yu, Yingjia; Chen, Guiliang; Duan, Gengli

2017-09-01

A new, simple, and fast infrared-assisted self enzymolysis extraction (IRASEE) approach for the extraction of total flavonoid aglycones (TFA) mainly including baicalein, wogonin, and oroxylin A from Scutellariae Radix is presented to enhance extraction yield. Extraction enzymolysis temperature, enzymolysis liquid-to-solid ratio, enzymolysis pH, enzymolysis time and infrared power, the factors affecting IRASEE procedure, were investigated in a newly designed, temperature-controlled infrared-assisted extraction (TC-IRAE) system to acquire the optimum analysis conditions. The results illustrated that IRASEE possessed great advantages in terms of efficiency and time compared with other conventional extraction techniques. Furthermore, the mechanism of IRASEE was preliminarily explored by observing the microscopic change of the samples surface structures, studying the main chemical compositions change of the samples before and after extraction and investigating the kinetics and thermodynamics at three temperature levels during the IRASEE process. These findings revealed that IRASEE can destroy the surface microstructures to accelerate the mass transfer and reduce the activation energy to intensify the chemical process. This integrative study presents a simple, rapid, efficient, and environmental IRASEE method for TFA extraction which has promising prospects for other similar herbal medicines. Graphical Abstract ᅟ.

Dynamic Relaxation: A Technique for Detailed Thermo-Elastic Structural Analysis of Transportation Structures

NASA Astrophysics Data System (ADS)

Shoukry, Samir N.; William, Gergis W.; Riad, Mourad Y.; McBride, Kevyn C.

2006-08-01

Dynamic relaxation is a technique developed to solve static problems through an explicit integration in finite element. The main advantage of such a technique is the ability to solve a large problem in a relatively short time compared with the traditional implicit techniques, especially when using nonlinear material models. This paper describes the use of such a technique in analyzing large transportation structures as dowel jointed concrete pavements and 306-m-long, reinforced concrete bridge superstructure under the effect of temperature variations. The main feature of the pavement model is the detailed modeling of dowel bars and their interfaces with the surrounding concrete using extremely fine mesh of solid elements, while in the bridge structure it is the detailed modeling of the girder-deck interface as well as the bracing members between the girders. The 3DFE results were found to be in a good agreement with experimentally measured data obtained from an instrumented pavements sections and a highway bridge constructed in West Virginia. Thus, such a technique provides a good tool for analyzing the response of large structures to static loads in a fraction of the time required by traditional, implicit finite element methods.

A review on lipase-catalyzed reactions in ultrasound-assisted systems.

PubMed

Lerin, Lindomar A; Loss, Raquel A; Remonatto, Daniela; Zenevicz, Mara Cristina; Balen, Manuela; Netto, Vendelino Oenning; Ninow, Jorge L; Trentin, Cláudia M; Oliveira, J Vladimir; de Oliveira, Débora

2014-12-01

The named "green chemistry" has been receiving increasing prominence due to its environmentally friendly characteristics. The use of enzymes as catalysts in processes of synthesis to replace the traditional use of chemical catalysts present as main advantage the fact of following the principles of the green chemistry. However, processes of enzymatic nature generally provide lower yields when compared to the conventional chemical processes. Therefore, in the last years, the ultrasound has been extensively used in enzymatic processes, such as the production of esters with desirable characteristics for the pharmaceutical, cosmetics, and food industry, for the hydrolysis and glycerolysis of vegetable oils, production of biodiesel, etc. Several works found in the open literature suggest that the energy released by the ultrasound during the cavitation phenomena can be used to enhance mass transfer (substrate/enzyme), hence increasing the rate of products formation, and also contributing to enhance the enzyme catalytic activity. Furthermore, the ultrasound is considered a "green" technology due to its high efficiency, low instrumental requirement and significant reduction of the processing time in comparison to other techniques. The main goal of this review was to summarize studies available to date regarding the application of ultrasound in enzyme-catalyzed esterification, hydrolysis, glycerolysis and transesterification reactions.

Micromachined Fluid Inertial Sensors

PubMed Central

Liu, Shiqiang; Zhu, Rong

2017-01-01

Micromachined fluid inertial sensors are an important class of inertial sensors, which mainly includes thermal accelerometers and fluid gyroscopes, which have now been developed since the end of the last century for about 20 years. Compared with conventional silicon or quartz inertial sensors, the fluid inertial sensors use a fluid instead of a solid proof mass as the moving and sensitive element, and thus offer advantages of simple structures, low cost, high shock resistance, and large measurement ranges while the sensitivity and bandwidth are not competitive. Many studies and various designs have been reported in the past two decades. This review firstly introduces the working principles of fluid inertial sensors, followed by the relevant research developments. The micromachined thermal accelerometers based on thermal convection have developed maturely and become commercialized. However, the micromachined fluid gyroscopes, which are based on jet flow or thermal flow, are less mature. The key issues and technologies of the thermal accelerometers, mainly including bandwidth, temperature compensation, monolithic integration of tri-axis accelerometers and strategies for high production yields are also summarized and discussed. For the micromachined fluid gyroscopes, improving integration and sensitivity, reducing thermal errors and cross coupling errors are the issues of most concern. PMID:28216569

Experiences with a New Shielding Material

NASA Astrophysics Data System (ADS)

Bücherl, T.; Calzada, E.; Liu, S. Q.; Stöwer, W.; Kortmann, F.; Größlhuber, H.; von Gostomski, Ch. Lierse

Recent modifications of the NECTAR facility included the set-up of a new beam dump. One of its main components is based on a reusable shielding material developed at TUM. The provided base material was characterized and its advantages and limitations were investigated by simulation studies and by measurements.

The Structures & Properties of Carbon

ERIC Educational Resources Information Center

Castellini, Olivia M.; Lisensky, George C.; Ehrlich, Jennifer; Zenner, Greta M.; Crone, Wendy C.

2006-01-01

The four main forms of carbon--diamond, graphite, buckyballs, and carbon nanotubes (CNTs)--are an excellent vehicle for teaching fundamental principles of chemical bonding, material structure, and properties. Carbon atoms form a variety of structures that are intrinsically connected to the properties they exhibit. Educators can take advantage of…

Fluorous Compounds and their Role in Separation Chemistry

ERIC Educational Resources Information Center

Ubeda, Maria Angeles; Dembinski, Roman

2006-01-01

The main focus of fluorous chemistry targets resource and time-consuming separation, in order to improve the material economy and thus represents potentially environmentally friendly technology. Fluorous chemistry offers the advantage of easy separation based on different affirmatives of organics and fluorous molecules, where the process called…

SSME structural dynamic model development

NASA Technical Reports Server (NTRS)

Foley, M. J.; Tilley, D. M.; Welch, C. T.

1983-01-01

A mathematical model of the Space Shuttle Main Engine (SSME) as a complete assembly, with detailed emphasis on LOX and High Fuel Turbopumps is developed. The advantages of both complete engine dynamics, and high fidelity modeling are incorporated. Development of this model, some results, and projected applications are discussed.

Practical advantages of evolutionary computation

NASA Astrophysics Data System (ADS)

Fogel, David B.

1997-10-01

Evolutionary computation is becoming a common technique for solving difficult, real-world problems in industry, medicine, and defense. This paper reviews some of the practical advantages to using evolutionary algorithms as compared with classic methods of optimization or artificial intelligence. Specific advantages include the flexibility of the procedures, as well as their ability to self-adapt the search for optimum solutions on the fly. As desktop computers increase in speed, the application of evolutionary algorithms will become routine.

Laser-Based Lighting: Experimental Analysis and Perspectives

PubMed Central

Yushchenko, Maksym; Buffolo, Matteo; Meneghini, Matteo; Zanoni, Enrico

2017-01-01

This paper presents an extensive analysis of the operating principles, theoretical background, advantages and limitations of laser-based lighting systems. In the first part of the paper we discuss the main advantages and issues of laser-based lighting, and present a comparison with conventional LED-lighting technology. In the second part of the paper, we present original experimental data on the stability and reliability of phosphor layers for laser lighting, based on high light-intensity and high-temperature degradation tests. In the third part of the paper (for the first time) we present a detailed comparison between three different solutions for laser lighting, based on (i) transmissive phosphor layers; (ii) a reflective/angled phosphor layer; and (iii) a parabolic reflector, by discussing the advantages and drawbacks of each approach. The results presented within this paper can be used as a guideline for the development of advanced lighting systems based on laser diodes. PMID:29019958

Technology Assessment Need: Review on Attractiveness and Competitiveness

NASA Astrophysics Data System (ADS)

Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

2017-06-01

Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

A method for measuring different classes of human immunoglobulins specific for the penicilloyl group

PubMed Central

Wheeler, A. W.

1971-01-01

A method is described for the detection of human immunoglobulins of the four main classes specific for the penicilloyl group. The technique is an adaptation of the red cell linked antigen antiglobulin reaction based on the finding that benzyl penicilloylated rabbit γ-globulin, specific for human erythrocytes, reacted specifically with erythrocytes but did not agglutinate them. In turn this complex reacted specifically with human penicilloyl antibody and it was then possible to titrate each immunoglobulin class by the addition of anti-immunoglobulin sera. The method described here was used to compare titres of penicilloyl specific immunoglobulins of the same class between different sera. The test was found to be less sensitive than the hapten modified bacteriophage reduction test but had the advantage that individual immunoglobulin classes could be compared. In the absence of a reliable method for the diagnosis of pencillin allergy, it is hoped that the technique described will be a useful addition to existing in vivo and in vitro methods of determining the antibody response of the patient to the penicilloyl group. PMID:4105475

Automated EEG artifact elimination by applying machine learning algorithms to ICA-based features.

PubMed

Radüntz, Thea; Scouten, Jon; Hochmuth, Olaf; Meffert, Beate

2017-08-01

Biological and non-biological artifacts cause severe problems when dealing with electroencephalogram (EEG) recordings. Independent component analysis (ICA) is a widely used method for eliminating various artifacts from recordings. However, evaluating and classifying the calculated independent components (IC) as artifact or EEG is not fully automated at present. In this study, we propose a new approach for automated artifact elimination, which applies machine learning algorithms to ICA-based features. We compared the performance of our classifiers with the visual classification results given by experts. The best result with an accuracy rate of 95% was achieved using features obtained by range filtering of the topoplots and IC power spectra combined with an artificial neural network. Compared with the existing automated solutions, our proposed method is not limited to specific types of artifacts, electrode configurations, or number of EEG channels. The main advantages of the proposed method is that it provides an automatic, reliable, real-time capable, and practical tool, which avoids the need for the time-consuming manual selection of ICs during artifact removal.

An Analytical Comparison of the Acoustic Analogy and Kirchhoff Formulation for Moving Surfaces

NASA Technical Reports Server (NTRS)

Brentner, Kenneth S.; Farassat, F.

1997-01-01

The Lighthill acoustic analogy, as embodied in the Ffowcs Williams-Hawkings (FW-H) equation, is compared with the Kirchhoff formulation for moving surfaces. A comparison of the two governing equations reveals that the main Kirchhoff advantage (namely nonlinear flow effects are included in the surface integration) is also available to the FW-H method if the integration surface used in the FW-H equation is not assumed impenetrable. The FW-H equation is analytically superior for aeroacoustics because it is based upon the conservation laws of fluid mechanics rather than the wave equation. This means that the FW-H equation is valid even if the integration surface is in the nonlinear region. This is demonstrated numerically in the paper. The Kirchhoff approach can lead to substantial errors if the integration surface is not positioned in the linear region. These errors may be hard to identify. Finally, new metrics based on the Sobolev norm are introduced which may be used to compare input data for both quadrupole noise calculations and Kirchhoff noise predictions.

A comparison of various modes of liquid-liquid based microextraction techniques: determination of picric acid.

PubMed

Burdel, Martin; Šandrejová, Jana; Balogh, Ioseph S; Vishnikin, Andriy; Andruch, Vasil

2013-03-01

Three modes of liquid-liquid based microextraction techniques--namely auxiliary solvent-assisted dispersive liquid-liquid microextraction, auxiliary solvent-assisted dispersive liquid-liquid microextraction with low-solvent consumption, and ultrasound-assisted emulsification microextraction--were compared. Picric acid was used as the model analyte. The determination is based on the reaction of picric acid with Astra Phloxine reagent to produce an ion associate easily extractable by various organic solvents, followed by spectrophotometric detection at 558 nm. Each of the compared procedures has both advantages and disadvantages. The main benefit of ultrasound-assisted emulsification microextraction is that no hazardous chlorinated extraction solvents and no dispersive solvent are necessary. Therefore, this procedure was selected for validation. Under optimized experimental conditions (pH 3, 7 × 10(-5) mol/L of Astra Phloxine, and 100 μL of toluene), the calibration plot was linear in the range of 0.02-0.14 mg/L and the LOD was 7 μg/L of picric acid. The developed procedure was applied to the analysis of spiked water samples. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of river flow fluctuations on riparian vegetation dynamics: Processes and models

NASA Astrophysics Data System (ADS)

Vesipa, Riccardo; Camporeale, Carlo; Ridolfi, Luca

2017-12-01

Several decades of field observations, laboratory experiments and mathematical modelings have demonstrated that the riparian environment is a disturbance-driven ecosystem, and that the main source of disturbance is river flow fluctuations. The focus of the present work has been on the key role that flow fluctuations play in determining the abundance, zonation and species composition of patches of riparian vegetation. To this aim, the scientific literature on the subject, over the last 20 years, has been reviewed. First, the most relevant ecological, morphological and chemical mechanisms induced by river flow fluctuations are described from a process-based perspective. The role of flow variability is discussed for the processes that affect the recruitment of vegetation, the vegetation during its adult life, and the morphological and nutrient dynamics occurring in the riparian habitat. Particular emphasis has been given to studies that were aimed at quantifying the effect of these processes on vegetation, and at linking them to the statistical characteristics of the river hydrology. Second, the advances made, from a modeling point of view, have been considered and discussed. The main models that have been developed to describe the dynamics of riparian vegetation have been presented. Different modeling approaches have been compared, and the corresponding advantages and drawbacks have been pointed out. Finally, attention has been paid to identifying the processes considered by the models, and these processes have been compared with those that have actually been observed or measured in field/laboratory studies.

Beyond Black and White: Color and Mortality in Post Reconstruction Era North Carolina

PubMed Central

Green, Tiffany L; Hamilton, Tod G.

2014-01-01

A growing empirical literature in economics and sociology documents the existence of differences in social and economic outcomes between mixed-race blacks and other blacks . However, few researchers have considered whether the advantages associated with mixed-race status may have also translated into differences in mortality outcomes between subgroups of blacks and how both groups compared to whites. We employ previously untapped 1880 North Carolina Mortality census records in conjunction with data from the 1880 North Carolina Population Census to examine whether mulatto, or mixed-race blacks may have experienced mortality advantages over to their colored, or non-mixed race counterparts. For men between the ages of 20-44, estimates demonstrate that all black males are more likely than whites to die. Although our results indicate that there are no statistically significant differences in mortality between mulatto and colored blacks, there are some indications that mulatto males may have enjoyed a slight mortality advantage compared to their colored counterparts. However, we find a substantial mortality advantage associated with mixed-race status among women. These findings indicate that mixed-race women, rather than men, may have accrued any mortality advantages associated with color and white ancestry. PMID:25722496