Reorganization of the Administration of Education and Science and the Long-Range Tasks of Higher Education

ERIC Educational Resources Information Center

Sadovnichii, V.

2005-01-01

This article talks about the issues discussed at the meeting of the Russian Union of Rectors. The discussion includes those main issues that are most in need of attention in the sphere of education and the organization of science. The author in this article, mentions few of the historical advantages of their system of higher education which is of…

Polymer Electrolytes for Lithium/Sulfur Batteries

PubMed Central

Zhao, Yan; Zhang, Yongguang; Gosselink, Denise; Doan, The Nam Long; Sadhu, Mikhail; Cheang, Ho-Jae; Chen, Pu

2012-01-01

This review evaluates the characteristics and advantages of employing polymer electrolytes in lithium/sulfur (Li/S) batteries. The main highlights of this study constitute detailed information on the advanced developments for solid polymer electrolytes and gel polymer electrolytes, used in the lithium/sulfur battery. This includes an in-depth analysis conducted on the preparation and electrochemical characteristics of the Li/S batteries based on these polymer electrolytes. PMID:24958296

A review on remote monitoring technology applied to implantable electronic cardiovascular devices.

PubMed

Costa, Paulo Dias; Rodrigues, Pedro Pereira; Reis, António Hipólito; Costa-Pereira, Altamiro

2010-12-01

Implantable electronic cardiovascular devices (IECD) include a broad spectrum of devices that have the ability to maintain rhythm, provide cardiac resynchronization therapy, and/or prevent sudden cardiac death. The incidence of bradyarrhythmias and other cardiac problems led to a broader use of IECD, which turned traditional follow-up into an extremely heavy burden for healthcare systems to support. Our aim was to assess the impact of remote monitoring on the follow-up of patients with IECD. We performed a review through PubMed using a specific query. The paper selection process included a three-step approach in which title, abstract, and cross-references were analyzed. Studies were then selected using previously defined inclusion criteria and analyzed according to the country of origin of the study, year, and journal of publication; type of study; and main issues covered. Twenty articles were included in this review. Eighty percent of the selected papers addressed clinical issues, from which 94% referred clinical events identification, clinical stability, time savings, or physician satisfaction as advantages, whereas 38% referred disadvantages that included both legal and technical issues. Forty-five percent of the papers referred patient issues, from which 89% presented advantages, focusing on patient acceptance/satisfaction, and patient time-savings. The main downsides were technical issues but patient privacy was also addressed. All the papers dealing with economic issues (20%) referred both advantages and disadvantages equally. Remote monitoring is presently a safe technology, widely accepted by patients and physicians, for its convenience, reassurance, and diagnostic potential. This review summarizes the principles of remote IECD monitoring presenting the current state-of-the-art. Patient safety and device interaction, applicability of current technology, and limitations of remote IECD monitoring are also addressed. The use of remote monitor should consider the selection of patients, the type of disease, and centers' availability to receive, interpret and respond to device alerts. Before remote IECD monitoring can be routinely used, technical, procedure, and ethical/legal issues should be addressed.

Prosthetic Hand With Two Gripping Fingers

NASA Technical Reports Server (NTRS)

Norton, William E.; Belcher, Jewell B.; Vest, Thomas W.; Carden, James R.

1993-01-01

Prosthetic hand developed for amputee who retains significant portion of forearm. Outer end of device is end effector including two fingers, one moved by rotating remaining part of forearm about its longitudinal axis. Main body of end effector is end member supporting fingers, roller bearing assembly, and rack-and-pinion mechanism. Advantage of rack-and-pinion mechanism enables user to open or close gap between fingers with precision and force.

Prospects for development of heat supply systems in high-rise districts

NASA Astrophysics Data System (ADS)

Zhila, Viktor; Solovyeva, Elena

2018-03-01

The article analyzes the main advantages and disadvantages of centralized and decentralized heat supply systems in high-rise districts. The main schemes of centralized heat supply systems are considered. They include centralized heat supply from boiler houses, centralized heat supply from autonomous heat sources, heat supply from roof boiler houses and door-to-door heating supply. For each of these variant, the gas distribution systems are considered and analyzed. These systems vary depending on the heat source location. For each of these systems, technical and economic indicators are taken into account, the analysis of which allows choosing the best option for districts where high-rise buildings predominate.

Extensions of the survival advantage in memory: examining the role of ancestral context and implied social isolation.

PubMed

Kostic, Bogdan; McFarlan, Chastity C; Cleary, Anne M

2012-07-01

Recent work (e.g., Nairne & Pandeirada, 2010) has shown that words are remembered better when they have been processed for their survival value in a grasslands context than when processed in other contexts. It has been suggested that this is because human memory systems were shaped by evolution specifically to help humans survive. Thus far, the survival processing advantage has mainly been shown with grasslands contexts, which are thought to be particularly relevant to human evolution. The present study demonstrated the survival processing advantage with other contexts (e.g., lost in a jungle), including with contexts that should not, in and of themselves, be relevant to human evolution (e.g., lost in outer space). We further examined whether implied social isolation plays a critical role in the survival advantage to memory by comparing scenarios in which the person is alone versus with other people present (e.g., lost at sea alone or with others), and whether the perceived source of danger is social isolation or other human attackers. A survival advantage was shown in both the isolation and the group settings, and whether the primary source of danger was isolation or other human attackers did not matter. These findings suggest that the survival advantage in memory is not dependent on evolutionarily relevant physical contexts (e.g., grasslands) or particular sources of perceived danger (social isolation vs. perceived attackers), showing the advantage to be robust and applicable to a variety of scenarios. 2012 APA, all rights reserved

The Swiss Master in Chiropractic Medicine Curriculum: Preparing Graduates to Work Together With Medicine to Improve Patient Care.

PubMed

Humphreys, B Kim; Peterson, Cynthia K

2016-12-01

In 2007, chiropractic became 1 of the 5 medical professions in Switzerland. This required a new chiropractic program that was fully integrated within a Swiss medical school. The purpose of this article was to discuss the Master in Chiropractic Medicine (MChiroMed) program at the University of Zürich, including advantages, opportunities, and challenges. In 2008, the MChiroMed program began with its first student cohort. The MChiroMed program is a 6-year Bologna model 2-cycle (bachelor and master) "spiral curriculum," with the first 4 years being fully integrated within the medical curriculum. A review of the main features of the curriculum revealed the advantages, opportunities, and challenges of this program in comparison with other contemporary chiropractic educational programs. Advantages and opportunities include an integrated curriculum within a university, medical school, and musculoskeletal hospital, with their associated human and physical resources. Many opportunities exist for high-level research collaborations. The rigorous entrance qualifications and small student cohorts result in bright, motivated, and enthusiastic students; appropriate assessments; and timely feedback on academic and clinical subjects. Early patient contact in hospitals and clinical facilities encourages the integration of academic theory and clinical practice. The main challenges faced by this program include difficulty recruiting a sufficient number of students because of the rigorous entrance requirements and curriculum overload resulting from undertaking a full medical curriculum and chiropractic modules. The MChiroMed program is a unique chiropractic curriculum that integrates medical and chiropractic education within a spiral curriculum at a world-class Swiss university medical school. The expectation is that graduates, with their expanded diagnostic and therapeutic knowledge, skills, and experience, will become future experts in primary spine care in Switzerland. It is hoped that this curriculum model will be adopted by other countries and jurisdictions seeking to enhance the role of chiropractic in health care.

Telemetry methods for monitoring physiological parameters

NASA Technical Reports Server (NTRS)

Fryer, T. B.; Sandler, H.

1982-01-01

The use of telemetry to monitor various physiological functions is discussed. The advantages of the technique and the parameters that it can monitor are assessed, and the main telemetry systems, including pressure telemetry, flow telemetry, and multichannel telemetry, are detailed. Human applications of implanted flow transducers, total implant versus backpack telemetry, the use of power sources and integrated circuits in telemetry, and the future prospects of the technique in hypertension treatment and research are discussed.

Travel and the home advantage.

PubMed

Pace, A; Carron, A V

1992-03-01

The purpose of the present study was to examine the relative contributions of various travel related variables to visiting team success in the National Hockey League. A multiple regression design was used with game outcome as the dependent variable. The independent variables of interest included, as main effects and interactions, number of time zones crossed, direction of travel, distance traveled, preparation/adjustment time, time of season, game number on the road trip, and the home stand. Visiting team success was negatively associated with the interaction of number of time zones crossed and increased preparation time between games, and was positively associated with game number on the road. It was concluded that only a small portion of the variance in the home advantage/visitor disadvantage can be explained by travel related factors.

Where Christ did not go: men, women and Frusculicchi. Gender identity disorder (GID): epistemological and ethical issues relating to the psychiatric diagnosis.

PubMed

Giordano, Simona

2011-09-01

Gender Identity Disorder (GID) is classified as a mental illness and included in the DSM-IV and ICD-1O. It will also be included in the DSM-V. The psychiatric diagnosis, in spite of some apparent advantages, has significant psychological and social adverse implications. This paper discusses some of the main epistemological reasons to consider gender variance as a mental disorder. It will also evaluate whether reasons of other kinds (pragmatic, rather than epistemological) may justify the inclusion of gender variance amongst mental illnesses.

Detection of genetically modified organisms in foods by DNA amplification techniques.

PubMed

García-Cañas, Virginia; Cifuentes, Alejandro; González, Ramón

2004-01-01

In this article, the different DNA amplification techniques that are being used for detecting genetically modified organisms (GMOs) in foods are examined. This study intends to provide an updated overview (including works published till June 2002) on the principal applications of such techniques together with their main advantages and drawbacks in GMO detection in foods. Some relevant facts on sampling, DNA isolation, and DNA amplification methods are discussed. Moreover; these analytical protocols are discuissed from a quantitative point of view, including the newest investigations on multiplex detection of GMOs in foods and validation of methods.

On the comparison of stochastic model predictive control strategies applied to a hydrogen-based microgrid

NASA Astrophysics Data System (ADS)

Velarde, P.; Valverde, L.; Maestre, J. M.; Ocampo-Martinez, C.; Bordons, C.

2017-03-01

In this paper, a performance comparison among three well-known stochastic model predictive control approaches, namely, multi-scenario, tree-based, and chance-constrained model predictive control is presented. To this end, three predictive controllers have been designed and implemented in a real renewable-hydrogen-based microgrid. The experimental set-up includes a PEM electrolyzer, lead-acid batteries, and a PEM fuel cell as main equipment. The real experimental results show significant differences from the plant components, mainly in terms of use of energy, for each implemented technique. Effectiveness, performance, advantages, and disadvantages of these techniques are extensively discussed and analyzed to give some valid criteria when selecting an appropriate stochastic predictive controller.

Randomized field experiments for program planning, development, and evaluation: an illustrative bibliography.

PubMed

Boruch, R F; Mcsweeny, A J; Soderstrom, E J

1978-11-01

This bibliography lists references to over 300 field experiments undertaken in schools, hospitals, prisons, and other social settings, mainly in the U.S. The list is divided into 10 major categories corresponding to the type of program under examination. They include: criminal and civil justice programs, mental health, training and education, mass media, information collection, utilization, commerce and industry, welfare, health, and family planning. The main purpose of the bibliography is to provide evidence on feasibility and scope of randomized field tests, since despite their advantages, it is not always clear from managerial, political, and other constraints on research that they can be mounted. Dates of publications range from 1944 to 1978.

Discovery and therapeutic promise of selective androgen receptor modulators.

PubMed

Chen, Jiyun; Kim, Juhyun; Dalton, James T

2005-06-01

Androgens are essential for male development and the maintenance of male secondary characteristics, such as bone mass, muscle mass, body composition, and spermatogenesis. The main disadvantages of steroidal androgens are their undesirable physicochemical and pharmacokinetic properties. The recent discovery of nonsteroidal selective androgen receptor modulators (SARMs) provides a promising alternative for testosterone replacement therapies with advantages including oral bioavailability, flexibility of structural modification, androgen receptor specificity, tissue selectivity, and the lack of steroid-related side effects.

Discovery AND Therapeutic Promise OF Selective Androgen Receptor Modulators

PubMed Central

Chen, Jiyun; Kim, Juhyun; Dalton, James T.

2007-01-01

Androgens are essential for male development and the maintenance of male secondary characteristics, such as bone mass, muscle mass, body composition, and spermatogenesis. The main disadvantages of steroidal androgens are their undesirable physicochemical and pharmacokinetic properties. The recent discovery of nonsteroidal selective androgen receptor modulators (SARMs) provides a promising alternative for testosterone replacement therapies with advantages including oral bioavailability, flexibility of structural modification, androgen receptor specificity, tissue selectivity, and the lack of steroid-related side effects. PMID:15994457

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gubser, Steven S.; van der Schee, Wilke

At strong coupling holographic studies have shown that heavy ion collisions do not obey normal boost invariance. Here we study a modified boost invariance through a complex shift in time, and show that this leads to surprisingly good agreement with numerical holographic computations. When including perturbations the agreement becomes even better, both in the hydrodynamic and the far-from-equilibrium regime. Finally, one of the main advantages is an analytic formulation of the stress-energy tensor of the longitudinal dynamics of holographic heavy ion collisions.

Patient-specific instruments: advantages and pitfalls

PubMed Central

Hafez, Mahmoud A.; Moholkar, Kirti

2017-01-01

Patient-specific instruments (PSI) aim to improve the accuracy of total knee replacement (TKR) based on computer-assisted preoperative planning. In this work, the authors describe the advantages and pitfalls of PSI based on their clinical experience. The main conclusion of this work is that PSI has direct impact on the logistical and technical features of TKR with some advantages and pitfalls. PMID:29227785

School Enrollment among Urban Non-Slum, Slum and Rural Children in Kenya: Is the Urban Advantage Eroding?

ERIC Educational Resources Information Center

Mugisha, Frederick

2006-01-01

For long now, the urban child has been considered to be more likely than his/her rural counterpart in being able to realize the dream of fully participating in school. This observation has mainly been attributed to what is commonly known as the "urban advantage." This "urban advantage" is associated with increased access to…

Advantages and limits of hemorrhoidal dearterialization in the treatment of symptomatic hemorrhoids

PubMed Central

Giamundo, Paolo

2016-01-01

In the last two decades, hemorrhoidal dearterialization has become universally accepted as a treatment option for symptomatic hemorrhoids. The rationale for this procedure is based on the assumption that arterial blood overflow is mainly responsible for dilatation of the hemorrhoidal plexus due to the absence of capillary interposition between the arterial and venous systems within the anal canal. Dearterialization, with either suture ligation (Doppler-guided hemorrhoid artery ligation/transanal hemorrhoidal dearterialization) or laser (hemorrhoidal laser procedure), may be successfully performed alone or with mucopexy. Although the added value of Doppler-guidance in association with dearterialization has recently been challenged, this imaging method still plays an important role in localizing hemorrhoidal arteries and, therefore, minimizing the effect of anatomic variation among patients. However, it is important to employ the correct Doppler transducer. Some Doppler transducers may not easily detect superficial arteries due to inadequate frequency settings. All techniques of dearterialization have the advantage of preserving the anatomy and physiology of the anal canal, when compared to other surgical treatments for hemorrhoids. This advantage cannot be underestimated as impaired anal function, including fecal incontinence and other defecation disorders, may occur following surgical treatment for hemorrhoids. Furthermore, this potentially devastating problem can occur in patients of all ages, including younger patients. PMID:26843909

Advantages and limits of hemorrhoidal dearterialization in the treatment of symptomatic hemorrhoids.

PubMed

Giamundo, Paolo

2016-01-27

In the last two decades, hemorrhoidal dearterialization has become universally accepted as a treatment option for symptomatic hemorrhoids. The rationale for this procedure is based on the assumption that arterial blood overflow is mainly responsible for dilatation of the hemorrhoidal plexus due to the absence of capillary interposition between the arterial and venous systems within the anal canal. Dearterialization, with either suture ligation (Doppler-guided hemorrhoid artery ligation/transanal hemorrhoidal dearterialization) or laser (hemorrhoidal laser procedure), may be successfully performed alone or with mucopexy. Although the added value of Doppler-guidance in association with dearterialization has recently been challenged, this imaging method still plays an important role in localizing hemorrhoidal arteries and, therefore, minimizing the effect of anatomic variation among patients. However, it is important to employ the correct Doppler transducer. Some Doppler transducers may not easily detect superficial arteries due to inadequate frequency settings. All techniques of dearterialization have the advantage of preserving the anatomy and physiology of the anal canal, when compared to other surgical treatments for hemorrhoids. This advantage cannot be underestimated as impaired anal function, including fecal incontinence and other defecation disorders, may occur following surgical treatment for hemorrhoids. Furthermore, this potentially devastating problem can occur in patients of all ages, including younger patients.

Fosphenytoin. Pharmacoeconomic implications of therapy.

PubMed

Holliday, S M; Benfield, P; Plosker, G L

1998-12-01

Advantages and disadvantages of Fosphenytoin. Advantages. More rapid intravenous administration than phenytoin and no need for an in-line filter. May be administered by intramuscular injection. Lower potential for local tissue and cardiac toxicity than phenytoin. Associated with less pain and phlebitis at the injection site, fewer reductions in infusion rate and fewer changes of administration site because of injection site complications than phenytoin. Benefits in terms of ease of administration and improved tolerability vs phenytoin have pharmacoeconomic implications which may translate into an overall cost advantage. Disadvantages. Approximately 10-fold higher acquisition cost vs phenytoin. Fosphenytoin is a parenterally administered prodrug of phenytoin, used in the treatment of patients with seizures. Advantages of fosphenytoin over phenytoin include more rapid intravenous administration, no need for an intravenous filter, and a lower potential for local tissue and cardiac toxicity. Unlike phenytoin, fosphenytoin may also be administered by intramuscular injection. Pharmacoeconomic data from a small study of patients with acute seizures in a US emergency department showed an overall cost advantage of fosphenytoin over phenytoin, despite a considerably greater acquisition cost of fosphenytoin. The main cost drivers for phenytoin therapy were treatment costs associated with adverse events. In view of the limited pharmacoeconomic data currently available, it is in the interests of individual institutions to conduct their own formal pharmacoeconomic studies applying local cost data and patterns of clinical practise to determine whether fosphenytoin should replace phenytoin on their formularly list.

Prediction of protein post-translational modifications: main trends and methods

NASA Astrophysics Data System (ADS)

Sobolev, B. N.; Veselovsky, A. V.; Poroikov, V. V.

2014-02-01

The review summarizes main trends in the development of methods for the prediction of protein post-translational modifications (PTMs) by considering the three most common types of PTMs — phosphorylation, acetylation and glycosylation. Considerable attention is given to general characteristics of regulatory interactions associated with PTMs. Different approaches to the prediction of PTMs are analyzed. Most of the methods are based only on the analysis of the neighbouring environment of modification sites. The related software is characterized by relatively low accuracy of PTM predictions, which may be due both to the incompleteness of training data and the features of PTM regulation. Advantages and limitations of the phylogenetic approach are considered. The prediction of PTMs using data on regulatory interactions, including the modular organization of interacting proteins, is a promising field, provided that a more carefully selected training data will be used. The bibliography includes 145 references.

Methadone maintenance treatment program in prisons from the perspective of medical and non-medical prison staff: a qualitative study in Iran

PubMed Central

Moradi, Ghobad; Farnia, Marzieh; Shokoohi, Mostafa; Shahbazi, Mohammad; Moazen, Babak; Rahmani, Khaled

2015-01-01

Background: As one of the most important components of harm reduction strategy for high-risk groups, following the HIV epidemics, Methadone Maintenance Treatment (MMT) has been initiated in prisoners since 2003. In this paper, we aimed to assess the advantages and shortcomings of the MMT program from the perspective of people who were involved with the delivery of prison healthcare in Iran. Methods: On the basis of grounded theory and through conducting 14 Focus Group Discussions (FGDs), 7 FGDs among physicians, consultants, experts, and 7 FGDs among directors and managers of prisons (n= 140) have been performed. The respondents were asked about positive and negative elements of the MMT program in Iranian prisons. Results: This study included a total of 48 themes, of which 22 themes were related to advantages and the other 26 were about shortcomings of MMT programs in the prisons. According to participants’ views "reduction of illegal drug use and high-risk injection", "reduction of potentially high-risk behaviors" and "making positive attitudes" were the main advantages of MMT in prisons, while issues such as "inaccurate implementation", "lack of skilled manpower" and "poor care after release from prison" were among the main shortcomings of MMT program. Conclusions: MMT program in Iran’s prisons has achieved remarkable success in the field of harm reduction, but to obtain much more significant results, its shortcomings and weaknesses must be also taken into account by policy-makers. PMID:26340487

Alternative Operational Energy Options - A Need for a Holistic Approach to Reduce the Logistics Tail and Improve Strategic Advantage

DTIC Science & Technology

2015-02-18

tends to resurge when the cost of petroleum rises as it did during the energy crisis of the 1970’s. Wind turbines are divided into two categories that...include horizontal axis and vertical axis. Horizontal-axis wind turbines have a main rotor driving an electrical generator on... turbines . They convert significantly more power in medium and higher winds than drag blades. Blades are attached directly to a hub just like on a

Bilateral Impedance Control For Telemanipulators

NASA Technical Reports Server (NTRS)

Moore, Christopher L.

1993-01-01

Telemanipulator system includes master robot manipulated by human operator, and slave robot performing tasks at remote location. Two robots electronically coupled so slave robot moves in response to commands from master robot. Teleoperation greatly enhanced if forces acting on slave robot fed back to operator, giving operator feeling he or she manipulates remote environment directly. Main advantage of bilateral impedance control: enables arbitrary specification of desired performance characteristics for telemanipulator system. Relationship between force and position modulated at both ends of system to suit requirements of task.

Water purification in Borexino

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giammarchi, M.; Balata, M.; Ioannucci, L.

Astroparticle Physics and Underground experiments searching for rare nuclear events, need high purity materials to act as detectors or detector shielding. Water has the advantage of being cheap, dense and easily available. Most of all, water can be purified to the goal of obatining a high level of radiopurity. Water Purification can be achieved by means of a combination of processes, including filtration, reverse osmosis, deionization and gas stripping. The Water Purification System for the Borexino experiment, will be described together with its main performances.

Extraction of latent images from printed media

NASA Astrophysics Data System (ADS)

Sergeyev, Vladislav; Fedoseev, Victor

2015-12-01

In this paper we propose an automatic technology for extraction of latent images from printed media such as documents, banknotes, financial securities, etc. This technology includes image processing by adaptively constructed Gabor filter bank for obtaining feature images, as well as subsequent stages of feature selection, grouping and multicomponent segmentation. The main advantage of the proposed technique is versatility: it allows to extract latent images made by different texture variations. Experimental results showing performance of the method over another known system for latent image extraction are given.

Complexified boost invariance and holographic heavy ion collisions

DOE PAGES

Gubser, Steven S.; van der Schee, Wilke

2015-01-08

At strong coupling holographic studies have shown that heavy ion collisions do not obey normal boost invariance. Here we study a modified boost invariance through a complex shift in time, and show that this leads to surprisingly good agreement with numerical holographic computations. When including perturbations the agreement becomes even better, both in the hydrodynamic and the far-from-equilibrium regime. Finally, one of the main advantages is an analytic formulation of the stress-energy tensor of the longitudinal dynamics of holographic heavy ion collisions.

Numerical integration of asymptotic solutions of ordinary differential equations

NASA Technical Reports Server (NTRS)

Thurston, Gaylen A.

1989-01-01

Classical asymptotic analysis of ordinary differential equations derives approximate solutions that are numerically stable. However, the analysis also leads to tedious expansions in powers of the relevant parameter for a particular problem. The expansions are replaced with integrals that can be evaluated by numerical integration. The resulting numerical solutions retain the linear independence that is the main advantage of asymptotic solutions. Examples, including the Falkner-Skan equation from laminar boundary layer theory, illustrate the method of asymptotic analysis with numerical integration.

Corneal and skin laser exposures from 1540-nm laser pulses

NASA Astrophysics Data System (ADS)

Johnson, Thomas E.; Mitchell, Michael A.; Rico, Pedro J.; Fletcher, David J.; Eurell, Thomas E.; Roach, William P.

2000-06-01

Mechanisms of tissue damage are investigated for skin and cornea exposures from 1540 nm ('eye safe') laser single pulses of 0.8 milli-seconds. New skin model data point out the advantages of using the Yucatan mini-pig versus the Yorkshire pig for in-vivo skin laser exposures. Major advantages found include similarities in thickness and melanin content when compared with human skin. Histology from Yucatan mini-pig skin exposures and the calculation of an initial ED50 threshold indicate that the main photon tissue interaction may not be solely due to water absorption. In-vitro corneal equivalents compared well with in-vivo rabbit cornea exposure under similar laser conditions. In-vivo and in-vitro histology show that initial energy deposition leading to damage occurs intrastromally, while epithelial cells show no direct injury due to laser light absorption.

Nattokinase: production and application.

PubMed

Dabbagh, Fatemeh; Negahdaripour, Manica; Berenjian, Aydin; Behfar, Abdolazim; Mohammadi, Fatemeh; Zamani, Mozhdeh; Irajie, Cambyz; Ghasemi, Younes

2014-11-01

Nattokinase (NK, also known as subtilisin NAT) (EC 3.4.21.62) is one of the most considerable extracellular enzymes produced by Bacillus subtilis natto. The main interest about this enzyme is due to its direct fibrinolytic activity. Being stable enough in the gastrointestinal tract makes this enzyme a useful agent for the oral thrombolytic therapy. Thus, NK is regarded as a valuable dietary supplement or nutraceutical. Proven safety and ease of mass production are other advantages of this enzyme. In addition to these valuable advantages, there are other applications attributed to NK including treatment of hypertension, Alzheimer's disease, and vitreoretinal disorders. This review tends to bring a brief description about this valuable enzyme and summarizes the various biotechnological approaches used in its production, recovery, and purification. Some of the most important applications of NK, as well as its future prospects, are also discussed.

Genetically modified crops and small-scale farmers: main opportunities and challenges.

PubMed

Azadi, Hossein; Samiee, Atry; Mahmoudi, Hossein; Jouzi, Zeynab; Khachak, Parisa Rafiaani; De Maeyer, Philippe; Witlox, Frank

2016-01-01

Although some important features of genetically modified (GM) crops such as insect resistance, herbicide tolerance, and drought tolerance might seem to be beneficial for small-scale farmers, the adoption of GM technology by smallholders is still slight. Identifying pros and cons of using this technology is important to understand the impacts of GM crops on these farmers. This article reviews the main opportunities and challenges of GM crops for small-scale farmers in developing countries. The most significant advantages of GM crops include being independent to farm size, environment protection, improvement of occupational health issues, and the potential of bio-fortified crops to reduce malnutrition. Challenges faced by small-scale farmers for adoption of GM crops comprise availability and accessibility of GM crop seeds, seed dissemination and price, and the lack of adequate information. In addition, R&D and production costs in using GM crops make it difficult for these farmers to adopt the use of these crops. Moreover, intellectual property right regulations may deprive resource poor farmers from the advantages of GM technology. Finally, concerns on socio-economic and environment safety issues are also addressed in this paper.

Radar Interferometry for Monitoring the Vibration Characteristics of Buildings and Civil Structures: Recent Case Studies in Spain.

PubMed

Luzi, Guido; Crosetto, Michele; Fernández, Enric

2017-03-24

The potential of a coherent microwave sensor to monitor the vibration characteristics of civil structures has been investigated in the past decade, and successful case studies have been published by different research teams. This remote sensing technique is based on the interferometric processing of real aperture radar acquisitions. Its capability to estimate, simultaneously and remotely, the displacement of different parts of the investigated structures, with high accuracy and repeatability, is its main advantage with respect to conventional sensors. A considerable amount of literature on this technique is available, including various case studies aimed at testing the ambient vibration of bridges, buildings, and towers. In the last years, this technique has been used in Spain for civil structures monitoring. In this paper, three examples of such case studies are described: the monitoring of the suspended bridge crossing the Ebro River at Amposta, the communications tower of Collserola in Barcelona, and an urban building located in Vilafranca del Penedès, a small town close to Barcelona. This paper summarizes the main outcomes of these case studies, underlining the advantages and limitations of the sensors currently available, and concluding with the possible improvements expected from the next generation of sensors.

Application of nanotechnology for the encapsulation of botanical insecticides for sustainable agriculture: prospects and promises.

PubMed

de Oliveira, Jhones Luiz; Campos, Estefânia Vangelie Ramos; Bakshi, Mansi; Abhilash, P C; Fraceto, Leonardo Fernandes

2014-12-01

This review article discusses the use of nanotechnology in combination with botanical insecticides in order to develop systems for pest control in agriculture. The main types of botanical insecticides are described, together with different carrier systems and their potential uses. The botanical insecticides include those based on active principles isolated from plant extracts, as well as essential oils derived from certain plants. The advantages offered by the systems are highlighted, together with the main technological challenges that must be resolved prior to future implementation of the systems for agricultural pest control. The use of botanical insecticides associated with nanotechnology offers considerable potential for increasing agricultural productivity, while at the same time reducing impacts on the environment and human health.

MODEST: A Tool for Geodesy and Astronomy

NASA Technical Reports Server (NTRS)

Sovers, Ojars J.; Jacobs, Christopher S.; Lanyi, Gabor E.

2004-01-01

Features of the JPL VLBI modeling and estimation software "MODEST" are reviewed. Its main advantages include thoroughly documented model physics, portability, and detailed error modeling. Two unique models are included: modeling of source structure and modeling of both spatial and temporal correlations in tropospheric delay noise. History of the code parallels the development of the astrometric and geodetic VLBI technique and the software retains many of the models implemented during its advancement. The code has been traceably maintained since the early 1980s, and will continue to be updated with recent IERS standards. Scripts are being developed to facilitate user-friendly data processing in the era of e-VLBI.

Improving Allergen Prediction in Main Crops Using a Weighted Integrative Method.

PubMed

Li, Jing; Wang, Jing; Li, Jing

2017-12-01

As a public health problem, food allergy is frequently caused by food allergy proteins, which trigger a type-I hypersensitivity reaction in the immune system of atopic individuals. The food allergens in our daily lives are mainly from crops including rice, wheat, soybean and maize. However, allergens in these main crops are far from fully uncovered. Although some bioinformatics tools or methods predicting the potential allergenicity of proteins have been proposed, each method has their limitation. In this paper, we built a novel algorithm PREAL W , which integrated PREAL, FAO/WHO criteria and motif-based method by a weighted average score, to benefit the advantages of different methods. Our results illustrated PREAL W has better performance significantly in the crops' allergen prediction. This integrative allergen prediction algorithm could be useful for critical food safety matters. The PREAL W could be accessed at http://lilab.life.sjtu.edu.cn:8080/prealw .

The dorsomedial prefrontal cortex plays a causal role in mediating in-group advantage in emotion recognition: A TMS study.

PubMed

Gamond, L; Cattaneo, Z

2016-12-01

Consistent evidence suggests that emotional facial expressions are better recognized when the expresser and the perceiver belong to the same social group (in-group advantage). In this study, we used transcranial magnetic stimulation (TMS) to investigate the possible causal involvement of the dorsomedial prefrontal cortex (dmPFC) and of the right temporo-parietal junction (TPJ), two main nodes of the mentalizing neural network, in mediating the in-group advantage in emotion recognition. Participants performed an emotion discrimination task in a minimal (blue/green) group paradigm. We found that interfering with activity in the dmPFC significantly interfered with the effect of minimal group-membership on emotion recognition, reducing participants' ability to discriminate emotions expressed by in-group members. In turn, rTPJ mainly affected emotion discrimination per se, irrespective of group membership. Overall, our results point to a causal role of the dmPFC in mediating the in-group advantage in emotion recognition, favoring intragroup communication. Copyright © 2016 Elsevier Ltd. All rights reserved.

Key facilitators and best practices of hotel-style room service in hospitals.

PubMed

Sheehan-Smith, Lisa

2006-04-01

This qualitative study sought to identify the features, advantages, and disadvantages of hotel-style room service; the barriers to, and facilitators for, implementing the process; and "best practices." The study took place in four heterogeneous hospitals. Participants included hospital administrators, managers, and room-service employees. Data-collection methods included semi-structured interviews, observations, and document analysis. Common features of hotel-style room service were meal delivery within 30 to 45 minutes, a restaurant-style menu, procedures to feed ineligible patients, tray assembly on demand, scripting, and waitstaff uniforms for room-service employees. The major barrier to implementing room service was obtaining nursing support. The key facilitators were the hospital's service-oriented culture, using a multidisciplinary planning team, engaging nursing departments early in the planning stages, and intense customer-service training of room-service employees. The overwhelming advantage was patients' control over their food choices. The main disadvantage was cost. Initial best practices in hotel-style room service include: (a) taking a multidisciplinary team approach for developing and implementing the process, (b) customer-service training, (c) using a customer-driven menu, (d) wearing waitstaff uniforms, and (e) using carts with airpots for dispensing hot beverages.

Algal Biomass Analysis by Laser-Based Analytical Techniques—A Review

PubMed Central

Pořízka, Pavel; Prochazková, Petra; Prochazka, David; Sládková, Lucia; Novotný, Jan; Petrilak, Michal; Brada, Michal; Samek, Ota; Pilát, Zdeněk; Zemánek, Pavel; Adam, Vojtěch; Kizek, René; Novotný, Karel; Kaiser, Jozef

2014-01-01

Algal biomass that is represented mainly by commercially grown algal strains has recently found many potential applications in various fields of interest. Its utilization has been found advantageous in the fields of bioremediation, biofuel production and the food industry. This paper reviews recent developments in the analysis of algal biomass with the main focus on the Laser-Induced Breakdown Spectroscopy, Raman spectroscopy, and partly Laser-Ablation Inductively Coupled Plasma techniques. The advantages of the selected laser-based analytical techniques are revealed and their fields of use are discussed in detail. PMID:25251409

Deciphering the complex: methodological overview of statistical models to derive OMICS-based biomarkers.

PubMed

Chadeau-Hyam, Marc; Campanella, Gianluca; Jombart, Thibaut; Bottolo, Leonardo; Portengen, Lutzen; Vineis, Paolo; Liquet, Benoit; Vermeulen, Roel C H

2013-08-01

Recent technological advances in molecular biology have given rise to numerous large-scale datasets whose analysis imposes serious methodological challenges mainly relating to the size and complex structure of the data. Considerable experience in analyzing such data has been gained over the past decade, mainly in genetics, from the Genome-Wide Association Study era, and more recently in transcriptomics and metabolomics. Building upon the corresponding literature, we provide here a nontechnical overview of well-established methods used to analyze OMICS data within three main types of regression-based approaches: univariate models including multiple testing correction strategies, dimension reduction techniques, and variable selection models. Our methodological description focuses on methods for which ready-to-use implementations are available. We describe the main underlying assumptions, the main features, and advantages and limitations of each of the models. This descriptive summary constitutes a useful tool for driving methodological choices while analyzing OMICS data, especially in environmental epidemiology, where the emergence of the exposome concept clearly calls for unified methods to analyze marginally and jointly complex exposure and OMICS datasets. Copyright © 2013 Wiley Periodicals, Inc.

[Application of root cause analysis in healthcare].

PubMed

Hsu, Tsung-Fu

2007-12-01

The main purpose of this study was to explore various aspects of root cause analysis (RCA), including its definition, rationale concept, main objective, implementation procedures, most common analysis methodology (fault tree analysis, FTA), and advantages and methodologic limitations in regard to healthcare. Several adverse events that occurred at a certain hospital were also analyzed by the author using FTA as part of this study. RCA is a process employed to identify basic and contributing causal factors underlying performance variations associated with adverse events. The rationale concept of RCA offers a systemic approach to improving patient safety that does not assign blame or liability to individuals. The four-step process involved in conducting an RCA includes: RCA preparation, proximate cause identification, root cause identification, and recommendation generation and implementation. FTA is a logical, structured process that can help identify potential causes of system failure before actual failures occur. Some advantages and significant methodologic limitations of RCA were discussed. Finally, we emphasized that errors stem principally from faults attributable to system design, practice guidelines, work conditions, and other human factors, which induce health professionals to make negligence or mistakes with regard to healthcare. We must explore the root causes of medical errors to eliminate potential RCA system failure factors. Also, a systemic approach is needed to resolve medical errors and move beyond a current culture centered on assigning fault to individuals. In constructing a real environment of patient-centered safety healthcare, we can help encourage clients to accept state-of-the-art healthcare services.

Cryobanking of plant species, promise and status

USDA-ARS?s Scientific Manuscript database

Currently, the PAGRP has over 4,000 unique samples of clonally propagated species and about 49,000 seed samples in long-term liquid nitrogen storage. Cryopreservation of plant genetic resources has several advantages over germplasm maintenance in field or in vitro; the main of the advantages are pro...

The art in getting flocks and herds to flerds

USDA-ARS?s Scientific Manuscript database

Flerds (small ruminants that consistently stay near cattle under free-ranging conditions) offer four distinct advantages over stocking simply flocks and herds to carry out mixed species stocking. One of the main advantages flerds offer is added protection from canine predation, reduced time in loca...

SEARCHING FOR EXTRATERRESTRIAL INTELLIGENCE SIGNALS IN ASTRONOMICAL SPECTRA, INCLUDING EXISTING DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borra, Ermanno F., E-mail: borra@phy.ulaval.ca

The main purpose of this article is to make astronomers aware that Searches for Extraterrestrial Intelligence (SETIs) can be carried out by analyzing standard astronomical spectra, including those they have already taken. Simplicity is the outstanding advantage of a search in spectra. The spectra can be analyzed by simple eye inspection or a few lines of code that uses Fourier transform software. Theory, confirmed by published experiments, shows that periodic signals in spectra can be easily generated by sending light pulses separated by constant time intervals. While part of this article, like all articles on SETIs, is highly speculative themore » basic physics is sound. In particular, technology now available on Earth could be used to send signals having the required energy to be detected at a target located 1000 lt-yr away. Extraterrestrial Intelligence (ETI) could use these signals to make us aware of their existence. For an ETI, the technique would also have the advantage that the signals could be detected both in spectra and searches for intensity pulses like those currently carried out on Earth.« less

Policing the boundaries of sex: a critical examination of gender verification and the Caster Semenya controversy.

PubMed

Cooky, Cheryl; Dworkin, Shari L

2013-01-01

On August 19, 2009, Caster Semenya, South African track star, won a gold medal in the women's 800-meter event. According to media reports, on the same day, the International Association of Athletics Federations (IAAF) ordered Semenya to undergo gender verification testing. This article critically assesses the main concepts and claims that undergird international sport organizations' policies regarding "gender verification" or "sex testing." We examine the ways in which these policies operate through several highly contested assumptions, including that (a) sex exists as a binary; (b) sport is a level playing field for competitors; and (c) some intersex athletes have an unfair advantage over women who are not intersex and, as such, they should be banned from competition to ensure that sport is a level playing field. To conclude, we make three recommendations that are consistent with the attainment of sex and gender justice in sport, which include acknowledging that myriad physical advantages are accepted in sport, recognizing that sport as a level playing field is a myth, and eliminating sex testing in sport.

Protection of SAAO observing site against light and dust pollution

NASA Astrophysics Data System (ADS)

Sefako, Ramotholo; Väisänen, Petri

2016-10-01

The South African Astronomical Observatory (SAAO) observing station near Sutherland, Northern Cape in South Africa, is one of the darkest sites in the world for optical and IR astronomy. The SAAO hosts and operates several facilities, including the Southern African Large Telescope (SALT) and a number of international robotic telescopes. To ensure that the conditions remain optimal for astronomy, legislation called the Astronomy Geographic Advantage (AGA) Act, of 2007, was enacted. The Act empowers the Department of Science and Technology (DST) to regulate issues that pose a threat to optical and/or radio astronomy in areas declared Astronomy Advantage Areas in South Africa. For optical astronomy, the main challenges are those posed by light and dust pollution as result of wind energy developments, and petroleum gas and oil exploration/exploitation in the area. We give an update of possible threats to the quality of the night skies at SAAO, and the challenges relating to the AGA Act implementation and enforcement. We discuss measures that are put in place to protect the Observatory, including a study to quantify the threat by a planned wind energy facility.

Strategic Mergers of Strong Institutions to Enhance Competitive Advantage

ERIC Educational Resources Information Center

Harman, Grant; Harman, Kay

2008-01-01

Strategic mergers are formal combinations or amalgamations of higher education institutions with the aim of enhancing competitive advantage, or merging for "mutual growth". Recently, in a number of countries, there has been a decided shift from mergers initiated by governments, and dealing mainly with "problem" cases, towards…

Health information technology in primary health care in developing countries: a literature review.

PubMed Central

Tomasi, Elaine; Facchini, Luiz Augusto; Maia, Maria de Fatima Santos

2004-01-01

This paper explores the debate and initiatives concerning the use of information technology (IT) in primary health care in developing countries. The literature from 1992-2002 was identified from searches of the MEDLINE, Latin American and Caribbean Health Science Literature Database (LILACS), Cochrane Library and Web of Science databases. The search identified 884 references, 350 of which were classified according to the scheme described by the Pan American Health Organization (PAHO). For the analysis of advantages, problems and perspectives of IT applications and systems, 52 articles were selected according to their potential contribution to the primary health-care processes in non-developed countries. These included: 10 on electronic patient registries (EPR), 22 on process and programmatic action evaluation and management systems (PPAEM) and 20 on clinical decision-support systems (CDS). The main advantages, limitations and perspectives are discussed. PMID:15640923

Microalgal symbiosis in biotechnology.

PubMed

Santos, Carla A; Reis, Alberto

2014-07-01

This review provides an analysis of recent published work on interactions between microorganisms, especially the ones involving mainly nutrient exchanges and at least with one microalga species. Examples of microbial partners are given, with a remark to the potential application of cultures of an autotroph and a heterotroph, which grow simultaneously, taking advantage of the complementary metabolisms. These are particularly interesting, either due to economic or sustainable aspects, and some applications have already reached the commercial stage of development. The added advantages of these symbiotic cultures are biomass, lipid, and other products productivity enhancement a better utilization of resources and the reduction or even elimination of process residues (including carbon dioxide and other greenhouse gases) to conduct an increasingly greener biotechnology. Among the several symbiotic partners referred, the microalgae and yeast cultures are the most used. The interaction between these two microorganisms shows how to enhance the lipid production for biodiesel purposes compared with separated (stand-alone) cultures.

Possible applications for municipal solid waste fly ash.

PubMed

Ferreira, C; Ribeiro, A; Ottosen, L

2003-01-31

The present study focuses on existing practices related to the reuse of Municipal Solid Waste (MSW) fly ash and identifies new potential uses. Nine possible applications were identified and grouped into four main categories: construction materials (cement, concrete, ceramics, glass and glass-ceramics); geotechnical applications (road pavement, embankments); "agriculture" (soil amendment); and, miscellaneous (sorbent, sludge conditioning). Each application is analysed in detail, including final-product technical characteristics, with a special emphasis on environmental impacts. A comparative analysis of the different options is performed, stressing the advantages but also the weaknesses of each option. This information is systemized in order to provide a framework for the selection of best technology and final products. The results presented here show new possibilities for this waste reuse in a short-term, in a wide range of fields, resulting in great advantages in waste minimization as well as resources conservation.

[Radial Approach for Percutaneous Coronary Interventions in Patients With Ischemic Heart Disease: Advantages and Disadvantages, Complications Rate in Comparison With Femoral Approach].

PubMed

Fettser, D V; Batyraliev, T A; Pershukov, I V; Vanyukov, A E; Sidorenko, B A

2017-05-01

During recent 10-15 years, percutaneous coronary interventions (PCI) have reached a new level of efficacy and safety. Rate of serious coronary complications has decreased. That to a greater degree exposes the problem of peripheral complications at the site of arterial approach. At the same time portion of patients older than 75 years in the total pool of PCI constantly increases. Number of patients with pronounced obesity also grows each year. Radial approach for PCI allows to substantially decrease rate of peripheral complications at the account of lowered rate of bleedings, and to shorten duration of hospitalization. In this literature review we present results of a number of relevant clinical studies including those which contained groups of elderly patients and of patients with obesity. We also have summarized main advantages and disadvantages of radial approach as compared with femoral approach for coronary angiography and PCI.

Antigen discovery and delivery of subunit vaccines by nonliving bacterial ghost vectors.

PubMed

Walcher, Petra; Mayr, Ulrike B; Azimpour-Tabrizi, Chakameh; Eko, Francis O; Jechlinger, Wolfgang; Mayrhofer, Peter; Alefantis, Tim; Mujer, Cesar V; DelVecchio, Vito G; Lubitz, Werner

2004-12-01

The bacterial ghost (BG) platform system is a novel vaccine delivery system endowed with intrinsic adjuvant properties. BGs are nonliving Gram-negative bacterial cell envelopes which are devoid of their cytoplasmic contents, yet maintain their cellular morphology and antigenic structures, including bioadhesive properties. The main advantages of BGs as carriers of subunit vaccines include their ability to stimulate a high immune response and to target the carrier itself to primary antigen-presenting cells. The intrinsic adjuvant properties of BGs enhance the immune response to target antigens, including T-cell activation and mucosal immunity. Since native and foreign antigens can be carried in the envelope complex of BGs, combination vaccines with multiple antigens of diverse origin can be presented to the immune system simultaneously. Beside the capacity of BGs to function as carriers of protein antigens, they also have a high loading capacity for DNA. Thus, loading BGs with recombinant DNA takes advantage of the excellent bioavailability for DNA-based vaccines and the high expression rates of the DNA-encoded antigens in target cell types such as macrophages and dendritic cells. There are many spaces within BGs including the inner and outer membranes, the periplasmic space and the internal lumen which can carry antigens, DNA or mediators of the immune response. All can be used for subunit antigen to design new vaccine candidates with particle presentation technology. In addition, the fact that BGs can also carry piggyback large-size foreign antigen particles, increases the technologic usefulness of BGs as combination vaccines against viral and bacterial pathogens. Furthermore, the BG antigen carriers can be stored as freeze-dried preparations at room temperature for extended periods without loss of efficacy. The potency, safety and relatively low production cost of BGs offer a significant technical advantage over currently utilized vaccine technologies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanlon, Edward; Capece, John

Hendry County Sustainable Bio-Fuels Center (HCSBC) is introduced and its main components are explained. These primarily include (1) farming systems, (2) sustainability analysis, (3) economic analysis and (4) educational components. Each of these components is discussed in further details, main researchers and their responsibility areas and introduced. The main focus of this presentation is a new farming concept. The proposed new farming concept is an alternative to the current "two sides of the ditch" model, in which on one side are yield-maximizing, input-intensive, commodity price-dependent farms, while on the other side are publicly-financed, nutrient-removing treatment areas and water reservoirs tryingmore » to mitigate the externalized costs of food production systems and other human-induced problems. The proposed approach is rental of the land back to agriculture corporations during the restoration transition period in order to increase water storage (allowing for greater water flow-through and/or water storage on farms), preventing issues such as nutrients removal, using flood-tolerant crops and reducing soil subsidence. Various pros and cons of the proposed agricultural eco-services are discussed - the advantages include flexibility for participating farmers to achieve environmental outcomes with reduced costs and using innovative incentives; the minuses include the fact that the potential markets are not developed yet or that existing regulations may prevent agricultural producers from selling their services.« less

Advantages of Aging.

ERIC Educational Resources Information Center

Palmore, Erdman

1979-01-01

There are at least 14 advantages of aging. Advantages to society of older persons include their lower criminal activity; greater political participation; increasing voluntary organization participation; work abilities; and visual perception abilities. Advantages for the individual include less criminal victimization; fewer accidents; social…

Post-processing method for wind speed ensemble forecast using wind speed and direction

NASA Astrophysics Data System (ADS)

Sofie Eide, Siri; Bjørnar Bremnes, John; Steinsland, Ingelin

2017-04-01

Statistical methods are widely applied to enhance the quality of both deterministic and ensemble NWP forecasts. In many situations, like wind speed forecasting, most of the predictive information is contained in one variable in the NWP models. However, in statistical calibration of deterministic forecasts it is often seen that including more variables can further improve forecast skill. For ensembles this is rarely taken advantage of, mainly due to that it is generally not straightforward how to include multiple variables. In this study, it is demonstrated how multiple variables can be included in Bayesian model averaging (BMA) by using a flexible regression method for estimating the conditional means. The method is applied to wind speed forecasting at 204 Norwegian stations based on wind speed and direction forecasts from the ECMWF ensemble system. At about 85 % of the sites the ensemble forecasts were improved in terms of CRPS by adding wind direction as predictor compared to only using wind speed. On average the improvements were about 5 %, but mainly for moderate to strong wind situations. For weak wind speeds adding wind direction had more or less neutral impact.

Preliminary performances measured on a CMOS long linear array for space application

NASA Astrophysics Data System (ADS)

Renard, Christophe; Artinian, Armand; Dantes, Didier; Lepage, Gérald; Diels, Wim

2017-11-01

This paper presents the design and the preliminary performances of a CMOS linear array, resulting from collaboration between Alcatel Alenia Space and Cypress Semiconductor BVBA, which takes advantage of emerging potentialities of CMOS technologies. The design of the sensor is presented: it includes 8000 panchromatic pixels with up to 25 rows used in TDI mode, and 4 lines of 2000 pixels for multispectral imaging. Main system requirements and detector tradeoffs are recalled, and the preliminary test results obtained with a first generation prototype are summarized and compared with predicted performances.

Remotely Operating a Fourier Transform Spectrometer for Atmospheric Remote Sensing

NASA Technical Reports Server (NTRS)

Blavier, J.-F.; Toon, G. C.; Sen, B.

2000-01-01

This paper describes how the MkIV instrument was adapted for remote operation from the Barcroft site, where the harsh winter conditions make access difficult. Some of the main technical challenges will be discussed including, (i) operation from solar panels and batteries, (ii) cooling the detectors with LN2, (iii) instrument control and monitoring over a cellular phone, and (iv) data storage, processing and analysis. Finally, MkIV spectra measured from Barcroft and compared with those measured from JPL to highlight the advantages of the higher altitude site.

[How to choose appropriate surgical approach in removal of the eyeball].

PubMed

Ye, Juan; Ning, Qingyao

2014-08-01

We often consult patients with non-functional eye caused by trauma, intraocular malignancy, absolute stage of glaucoma and other diseases who need to remove the eyeball in our clinical work. Eye removal is an irreversibly destructive procedure, which mainly include enucleation and evisceration. There are various surgical techniques which are still controversial. Both of the two procedures have their own advantages, disadvantages, indications and contraindications. The ophthalmologists should comprehensively consider the disease situations, medical conditions and the requirements of the patients when choosing appropriate surgical approach to remove the eyeball.

[Application of iodine metabolism analysis methods in thyroid diseases].

PubMed

Han, Jian-hua; Qiu, Ling

2013-08-01

The main physiological role of iodine in the body is to synthesize thyroid hormone. Both iodine deficiency and iodine excess can lead to severe thyroid diseases. While its role in thyroid diseases has increasingly been recognized, few relevant platforms and techniques for iodine detection have been available in China. This paper summarizes the advantages and disadvantages of currently iodine detection methods including direct titration, arsenic cerium catalytic spectrophotometry, chromatography with pulsed amperometry, colorimetry based on automatic biochemistry, inductively coupled plasma mass spectrometry, so as to optimize the iodine nutrition for patients with thyroid diseases.

Management of a high risk epileptic patient under conscious sedation: A multidisciplinary approach

PubMed Central

Chellathurai, Burnice Nalina Kumari; Thiagarajan, Ramakrishnan; Jayakumaran, SelvaKumar; Devadoss, Pradeep; Elavazhagan

2016-01-01

Epilepsy, characterized by the risk of recurrent seizures, is a chronic disease that afflicts about 5% of the world's population. The main dental problems associated with epileptic patients include gingival hyperplasia, minor oral injuries, tooth trauma, and prosthodontic problems, which require the dental treatment. Stress and fear are the most common triggering factors for the epilepsy in dental chair. Therefore, a more appropriate method of treating such epileptic patients may be warranted. Conscious sedation is a technique of providing good anesthesia and analgesia to patients, the main advantage of which is the patient's rapid return to presentation levels. Midazolam used as a sedative agent has anticonvulsant properties. This case report highlights a case requiring multiple dental procedures carried out in a high risk epileptic patient under conscious sedation. PMID:27041847

A Review of Optical NDT Technologies

PubMed Central

Zhu, Yong-Kai; Tian, Gui-Yun; Lu, Rong-Sheng; Zhang, Hong

2011-01-01

Optical non-destructive testing (NDT) has gained more and more attention in recent years, mainly because of its non-destructive imaging characteristics with high precision and sensitivity. This paper provides a review of the main optical NDT technologies, including fibre optics, electronic speckle, infrared thermography, endoscopic and terahertz technology. Among them, fibre optics features easy integration and embedding, electronic speckle focuses on whole-field high precision detection, infrared thermography has unique advantages for tests of combined materials, endoscopic technology provides images of the internal surface of the object directly, and terahertz technology opens a new direction of internal NDT because of its excellent penetration capability to most of non-metallic materials. Typical engineering applications of these technologies are illustrated, with a brief introduction of the history and discussion of recent progress. PMID:22164045

PSYCHOANALYSIS AND THE ARTS: THE SLIPPERY GROUND OF APPLIED ANALYSIS.

PubMed

Abella, Adela

2016-01-01

The ways in which today's psychoanalysts approach art closely follow the avenues opened by Freud a hundred years ago. Drawing mainly on Freud's studies on Jensen's Gradiva (1907) and on Leonardo da Vinci (1910a), the author examines the main paradigms he used in discussing artistic activity, including his doubts and hesitations. Present-day approaches to art are then examined via a discussion of the advantages and pitfalls of psychobiography, of the case study, and of textual approaches. The author makes a case for the type of interdisciplinary dialogue in which the goal is to establish a cross-fertilization between psychoanalysis and other fields of knowledge while striving to avoid hypersaturation of a work of art in order to foster expansion of the mind. © 2016 The Psychoanalytic Quarterly, Inc.

Does hydroxyapatite coating have no advantage over porous coating in primary total hip arthroplasty? A meta-analysis.

PubMed

Chen, Yun-Lin; Lin, Tiao; Liu, An; Shi, Ming-Min; Hu, Bin; Shi, Zhong-Li; Yan, Shi-Gui

2015-01-28

There are some arguments between the use of hydroxyapatite and porous coating. Some studies have shown that there is no difference between these two coatings in total hip arthroplasty (THA), while several other studies have shown that hydroxyapatite has advantages over the porous one. We have collected the studies in Pubmed, MEDLINE, EMBASE, and the Cochrane library from the earliest possible years to present, with the search strategy of "(HA OR hydroxyapatite) AND ((total hip arthroplasty) OR (total hip replacement)) AND (RCT* OR randomiz* OR control* OR compar* OR trial*)". The randomized controlled trials and comparative observation trials that evaluated the clinical and radiographic effects between hydroxyapatite coating and porous coating were included. Our main outcome measurements were Harris hip score (HHS) and survival, while the secondary outcome measurements were osteolysis, radiolucent lines, and polyethylene wear. Twelve RCTs and 9 comparative observation trials were included. Hydroxyapatite coating could improve the HHS (p < 0.01), reduce the incidence of thigh pain (p = 0.01), and reduce the incidence of femoral osteolysis (p = 0.01), but hydroxyapatite coating had no advantages on survival (p = 0.32), polyethylene wear (p = 0.08), and radiolucent lines (p = 0.78). Hydroxyapatite coating has shown to have an advantage over porous coating. The HHS and survival was duration-dependent-if given the sufficient duration of follow-up, hydroxyapatite coating would be better than porous coating for the survival. The properties of hydroxyapatite and the implant design had influence on thigh pain incidence, femoral osteolysis, and polyethylene wear. Thickness of 50 to 80 μm and purity larger than 90% increased the thigh pain incidence. Anatomic design had less polyethylene wear.

Discontinuity stresses in metallic pressure vessels

NASA Technical Reports Server (NTRS)

1971-01-01

The state of the art, criteria, and recommended practices for the theoretical and experimental analyses of discontinuity stresses and their distribution in metallic pressure vessels for space vehicles are outlined. The applicable types of pressure vessels include propellant tanks ranging from main load-carrying integral tank structure to small auxiliary tanks, storage tanks, solid propellant motor cases, high pressure gas bottles, and pressurized cabins. The major sources of discontinuity stresses are discussed, including deviations in geometry, material properties, loads, and temperature. The advantages, limitations, and disadvantages of various theoretical and experimental discontinuity analysis methods are summarized. Guides are presented for evaluating discontinuity stresses so that pressure vessel performance will not fall below acceptable levels.

Recommendations of diagnosis and treatment of pleural effusion. Update.

PubMed

Villena Garrido, Victoria; Cases Viedma, Enrique; Fernández Villar, Alberto; de Pablo Gafas, Alicia; Pérez Rodríguez, Esteban; Porcel Pérez, José Manuel; Rodríguez Panadero, Francisco; Ruiz Martínez, Carlos; Salvatierra Velázquez, Angel; Valdés Cuadrado, Luis

2014-06-01

Although during the last few years there have been several important changes in the diagnostic or therapeutic methods, pleural effusion is still one of the diseases that the respiratory specialist have to evaluate frequently. The aim of this paper is to update the knowledge about pleural effusions, rather than to review the causes of pleural diseases exhaustively. These recommendations have a longer extension for the subjects with a direct clinical usefulness, but a slight update of other pleural diseases has been also included. Among the main scientific advantages are included the thoracic ultrasonography, the intrapleural fibrinolytics, the pleurodesis agents, or the new pleural drainages techniques. Copyright © 2013 SEPAR. Published by Elsevier Espana. All rights reserved.

Detecting of foreign object debris on airfield pavement using convolution neural network

NASA Astrophysics Data System (ADS)

Cao, Xiaoguang; Gu, Yufeng; Bai, Xiangzhi

2017-11-01

It is of great practical significance to detect foreign object debris (FOD) timely and accurately on the airfield pavement, because the FOD is a fatal threaten for runway safety in airport. In this paper, a new FOD detection framework based on Single Shot MultiBox Detector (SSD) is proposed. Two strategies include making the detection network lighter and using dilated convolution, which are proposed to better solve the FOD detection problem. The advantages mainly include: (i) the network structure becomes lighter to speed up detection task and enhance detection accuracy; (ii) dilated convolution is applied in network structure to handle smaller FOD. Thus, we get a faster and more accurate detection system.

Design Of Combined Stochastic Feedforward/Feedback Control

NASA Technical Reports Server (NTRS)

Halyo, Nesim

1989-01-01

Methodology accommodates variety of control structures and design techniques. In methodology for combined stochastic feedforward/feedback control, main objectives of feedforward and feedback control laws seen clearly. Inclusion of error-integral feedback, dynamic compensation, rate-command control structure, and like integral element of methodology. Another advantage of methodology flexibility to develop variety of techniques for design of feedback control with arbitrary structures to obtain feedback controller: includes stochastic output feedback, multiconfiguration control, decentralized control, or frequency and classical control methods. Control modes of system include capture and tracking of localizer and glideslope, crab, decrab, and flare. By use of recommended incremental implementation, control laws simulated on digital computer and connected with nonlinear digital simulation of aircraft and its systems.

Evaluation of space shuttle main engine fluid dynamic frequency response characteristics

NASA Technical Reports Server (NTRS)

Gardner, T. G.

1980-01-01

In order to determine the POGO stability characteristics of the space shuttle main engine liquid oxygen (LOX) system, the fluid dynamic frequency response functions between elements in the SSME LOX system was evaluated, both analytically and experimentally. For the experimental data evaluation, a software package was written for the Hewlett-Packard 5451C Fourier analyzer. The POGO analysis software is documented and consists of five separate segments. Each segment is stored on the 5451C disc as an individual program and performs its own unique function. Two separate data reduction methods, a signal calibration, coherence or pulser signal based frequency response function blanking, and automatic plotting features are included in the program. The 5451C allows variable parameter transfer from program to program. This feature is used to advantage and requires only minimal user interface during the data reduction process. Experimental results are included and compared with the analytical predictions in order to adjust the general model and arrive at a realistic simulation of the POGO characteristics.

Universities and the Mobilization of Claims of Excellence for Competitive Advantage

ERIC Educational Resources Information Center

Wangenge-Ouma, Gerald; Langa, Patricio V.

2010-01-01

This study discusses the phenomenon of making claims of excellence by universities, which we interpret as a response, inter alia, to the hitherto unfamiliar context of scarce and diminishing resources. The main objective is to understand how claims of excellence are mobilised by higher education institutions to achieve "competitive advantage". The…

Advantages of Social Network Analysis in Educational Research

ERIC Educational Resources Information Center

Ushakov, K. M.; Kukso, K. N.

2015-01-01

Currently one of the main tools for the large scale studies of schools is statistical analysis. Although it is the most common method and it offers greatest opportunities for analysis, there are other quantitative methods for studying schools, such as network analysis. We discuss the potential advantages that network analysis has for educational…

Gliding arc in tornado using a reverse vortex flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalra, Chiranjeev S.; Cho, Young I.; Gutsol, Alexander

The present article reports a new gliding arc (GA) system using a reverse vortex flow ('tornado') in a cylindrical reactor (gliding arc in tornado, or GAT), as used to preserve the main advantages of traditional GA systems and overcome their main drawbacks. The primary advantages of traditional GA systems retained in the present GAT are the possibility to generate transitional plasma and to avoid considerable electrode erosion. In contrast to a traditional GA, the new GAT system ensures much more uniform gas treatment and has a significantly larger gas residence time in the reactor. The present article also describes themore » design of the new reactor and its stable operation regime when the variation of GAT current is very small. These features are understood to be very important for most viable applications. Additionally the GAT provides near-perfect thermal insulation from the reactor wall, indicating that the present GAT does not require the reactor wall to be constructed of high-temperature materials. The new GAT system, with its unique properties such as a high level of nonequilibrium and a large residence time, looks very promising for many industrial applications including fuel conversion, carbon dioxide conversion to carbon monoxide and oxygen, surface treatment, waste treatment, flame stabilization, hydrogen sulfide treatment, etc.« less

Maximum parsimony, substitution model, and probability phylogenetic trees.

PubMed

Weng, J F; Thomas, D A; Mareels, I

2011-01-01

The problem of inferring phylogenies (phylogenetic trees) is one of the main problems in computational biology. There are three main methods for inferring phylogenies-Maximum Parsimony (MP), Distance Matrix (DM) and Maximum Likelihood (ML), of which the MP method is the most well-studied and popular method. In the MP method the optimization criterion is the number of substitutions of the nucleotides computed by the differences in the investigated nucleotide sequences. However, the MP method is often criticized as it only counts the substitutions observable at the current time and all the unobservable substitutions that really occur in the evolutionary history are omitted. In order to take into account the unobservable substitutions, some substitution models have been established and they are now widely used in the DM and ML methods but these substitution models cannot be used within the classical MP method. Recently the authors proposed a probability representation model for phylogenetic trees and the reconstructed trees in this model are called probability phylogenetic trees. One of the advantages of the probability representation model is that it can include a substitution model to infer phylogenetic trees based on the MP principle. In this paper we explain how to use a substitution model in the reconstruction of probability phylogenetic trees and show the advantage of this approach with examples.

Various diffusion magnetic resonance imaging techniques for pancreatic cancer

PubMed Central

Tang, Meng-Yue; Zhang, Xiao-Ming; Chen, Tian-Wu; Huang, Xiao-Hua

2015-01-01

Pancreatic cancer is one of the most common malignant tumors and remains a treatment-refractory cancer with a poor prognosis. Currently, the diagnosis of pancreatic neoplasm depends mainly on imaging and which methods are conducive to detecting small lesions. Compared to the other techniques, magnetic resonance imaging (MRI) has irreplaceable advantages and can provide valuable information unattainable with other noninvasive or minimally invasive imaging techniques. Advances in MR hardware and pulse sequence design have particularly improved the quality and robustness of MRI of the pancreas. Diffusion MR imaging serves as one of the common functional MRI techniques and is the only technique that can be used to reflect the diffusion movement of water molecules in vivo. It is generally known that diffusion properties depend on the characterization of intrinsic features of tissue microdynamics and microstructure. With the improvement of the diffusion models, diffusion MR imaging techniques are increasingly varied, from the simplest and most commonly used technique to the more complex. In this review, the various diffusion MRI techniques for pancreatic cancer are discussed, including conventional diffusion weighted imaging (DWI), multi-b DWI based on intra-voxel incoherent motion theory, diffusion tensor imaging and diffusion kurtosis imaging. The principles, main parameters, advantages and limitations of these techniques, as well as future directions for pancreatic diffusion imaging are also discussed. PMID:26753059

Radar Interferometry for Monitoring the Vibration Characteristics of Buildings and Civil Structures: Recent Case Studies in Spain

PubMed Central

Luzi, Guido; Crosetto, Michele; Fernández, Enric

2017-01-01

The potential of a coherent microwave sensor to monitor the vibration characteristics of civil structures has been investigated in the past decade, and successful case studies have been published by different research teams. This remote sensing technique is based on the interferometric processing of real aperture radar acquisitions. Its capability to estimate, simultaneously and remotely, the displacement of different parts of the investigated structures, with high accuracy and repeatability, is its main advantage with respect to conventional sensors. A considerable amount of literature on this technique is available, including various case studies aimed at testing the ambient vibration of bridges, buildings, and towers. In the last years, this technique has been used in Spain for civil structures monitoring. In this paper, three examples of such case studies are described: the monitoring of the suspended bridge crossing the Ebro River at Amposta, the communications tower of Collserola in Barcelona, and an urban building located in Vilafranca del Penedès, a small town close to Barcelona. This paper summarizes the main outcomes of these case studies, underlining the advantages and limitations of the sensors currently available, and concluding with the possible improvements expected from the next generation of sensors. PMID:28338604

Report on First International Workshop on Robotic Surgery in Thoracic Oncology.

PubMed

Veronesi, Giulia; Cerfolio, Robert; Cingolani, Roberto; Rueckert, Jens C; Soler, Luc; Toker, Alper; Cariboni, Umberto; Bottoni, Edoardo; Fumagalli, Uberto; Melfi, Franca; Milli, Carlo; Novellis, Pierluigi; Voulaz, Emanuele; Alloisio, Marco

2016-01-01

A workshop of experts from France, Germany, Italy, and the United States took place at Humanitas Research Hospital Milan, Italy, on February 10 and 11, 2016, to examine techniques for and applications of robotic surgery to thoracic oncology. The main topics of presentation and discussion were robotic surgery for lung resection; robot-assisted thymectomy; minimally invasive surgery for esophageal cancer; new developments in computer-assisted surgery and medical applications of robots; the challenge of costs; and future clinical research in robotic thoracic surgery. The following article summarizes the main contributions to the workshop. The Workshop consensus was that since video-assisted thoracoscopic surgery (VATS) is becoming the mainstream approach to resectable lung cancer in North America and Europe, robotic surgery for thoracic oncology is likely to be embraced by an increasing numbers of thoracic surgeons, since it has technical advantages over VATS, including intuitive movements, tremor filtration, more degrees of manipulative freedom, motion scaling, and high-definition stereoscopic vision. These advantages may make robotic surgery more accessible than VATS to trainees and experienced surgeons and also lead to expanded indications. However, the high costs of robotic surgery and absence of tactile feedback remain obstacles to widespread dissemination. A prospective multicentric randomized trial (NCT02804893) to compare robotic and VATS approaches to stages I and II lung cancer will start shortly.

Elimination of volatile organic compounds by biofiltration: a review.

PubMed

Nikiema, Josiane; Dastous, Paul-André; Heitz, Michèle

2007-01-01

Volatile organic compounds (VOCs) are pollutants that are responsible for the formation of the tropospheric ozone, one of the precursors of smog. VOCs are emitted by various industries including chemical plants, pulp and paper mills, pharmaceuticals, cosmetics, electronics and agri-food industries. Some VOCs cause odor pollution while many of them are harmful to environment and human or animal health. For the removal of VOCs, biofiltration, a biological process, has proved to be reliable when properly operated. This process has therefore been widely applied in Europe and North America. The main advantages associated with the use of biofiltration are related to its set-up, maintenance, and operating costs which are usually lower than those related to other VOCs control technologies and because it is less harmful for the environment than conventional processes like incineration. In the present paper, the main parameters (type, moisture, pH, and temperature of filter bed, microbial population, nutrients concentrations, and VOCs' inlet load) to be controlled during the biofiltration are identified and described in detail. The main phenomena involved in biofiltration are also discussed. For improving the efficiency of VOC control biotechnology, new techniques are now proposed that include the use of membranes, biphasic reactors, UV photolysis, and many others.

SHARK-NIR system design analysis overview

NASA Astrophysics Data System (ADS)

Viotto, Valentina; Farinato, Jacopo; Greggio, Davide; Vassallo, Daniele; Carolo, Elena; Baruffolo, Andrea; Bergomi, Maria; Carlotti, Alexis; De Pascale, Marco; D'Orazi, Valentina; Fantinel, Daniela; Magrin, Demetrio; Marafatto, Luca; Mohr, Lars; Ragazzoni, Roberto; Salasnich, Bernardo; Verinaud, Christophe

2016-08-01

In this paper, we present an overview of the System Design Analysis carried on for SHARK-NIR, the coronagraphic camera designed to take advantage of the outstanding performance that can be obtained with the FLAO facility at the LBT, in the near infrared regime. Born as a fast-track project, the system now foresees both coronagraphic direct imaging and spectroscopic observing mode, together with a first order wavefront correction tool. The analysis we here report includes several trade-offs for the selection of the baseline design, in terms of optical and mechanical engineering, and the choice of the coronagraphic techniques to be implemented, to satisfy both the main scientific drivers and the technical requirements set at the level of the telescope. Further care has been taken on the possible exploitation of the synergy with other LBT instrumentation, like LBTI. A set of system specifications is then flown down from the upper level requirements to finally ensure the fulfillment of the science drivers. The preliminary performance budgets are presented, both in terms of the main optical planes stability and of the image quality, including the contributions of the main error sources in different observing modes.

Analysis of Tobyhanna Army Depot’s Radio Frequency Identification (RFID) Pilot Program: RFID as an Asset Management Tool

DTIC Science & Technology

2005-06-01

each has advantages and disadvantages. 1. Active Tags The main difference between the two types of RFID tags is that active tags have an internal...battery source and passive tags do not. The advantage of the active tag is that it transmits its own signal, which increases the read range of the...applications provide a stand-alone solution that employs a specific usage application of RFID and has clear economic advantages over supply chain

THE HOME ADVANTAGE IN MAJOR LEAGUE BASEBALL.

PubMed

Jones, Marshall B

2015-12-01

Home advantage is smaller in baseball than in other major professional sports for men, specifically football, basketball, or soccer. This paper advances an explanation. It begins by reviewing the main observations to support the view that there is little or no home advantage in individual sports. It then presents the case that home advantage originates in impaired teamwork among the away players. The need for teamwork and the extent of it vary from sport to sport. To the extent that a sport requires little teamwork it is more like an individual sport, and the home team would be expected to enjoy only a small advantage. Interactions among players on the same side (teamwork) are much less common in baseball than in the other sports considered.

Rational use of opioids.

PubMed

Mastronardi, P; Cafiero, T

2001-04-01

The role of analgesia and sedation in intensive care units (ICU) is ancillary to other intensive care strategies, nevertheless they permit that every other diagnostic and therapeutic procedure is safely performed by keeping the patient pain-free, anxiety-free and cooperative. Commonly used opioids in ICU include morphine, fentanyl, sufentanil and remifentanil. The choice among opioid drugs relies on their pharmacokinetics and their pharmacodynamic effects. Cardiovascular stability observed with fentanyl and sufentanil indicates their use in hemodynamically compromised patients. Short-acting remifentanil offers several advantages in patients requiring prolonged infusions. The organ-independent metabolism of this newer molecule may be valuable in patients with multiple organ failure. The main indications for opioid analgesia and sedation in ICU include: 1) Anxiety, pain and agitation: in turn, they can increase cardiac workload, myocardial oxygen consumption and rate of dysarrhythmias; 2) immediate postoperative period after major surgery; 3) short-term invasive procedures. Potential advantages offered by opioids in the ICU setting also include: a) Cardiac protection: in animal models, it has been observed that delta-opiate receptor stimulation confers a preconditioning-like protective effects against myocardial ischemia; b) Neuroprotection: recent studies suggest that mu- and kappa-opiate receptors are involved in ischemic preconditioning against seizures in the brain. During opioid therapy in the ICU, drug tolerance and withdrawal symptoms should be anticipated and the dose adjusted accordingly.

Use of Health Care Claims Data to Study Patients with Ophthalmologic Conditions

PubMed Central

Stein, Joshua D.; Lum, Flora; Lee, Paul P.; Rich, William L.; Coleman, Anne L.

2014-01-01

Objective To describe what information is or is not included in health care claims data, provide an overview of the main advantages and limitations of performing analyses using health care claims data, and offer general guidance on how to report and interpret findings of ophthalmology-related claims data analyses. Design Systematic review. Participants Not applicable. Methods A literature review and synthesis of methods for claims-based data analyses. Main Outcome Measures Not applicable. Results Some advantages of using claims data for analyses include large, diverse sample sizes, longitudinal follow-up, lack of selection bias, and potential for complex, multivariable modeling. The disadvantages include (a) the inherent limitations of claims data, such as incomplete, inaccurate, or missing data, or the lack of specific billing codes for some conditions; and (b) the inability, in some circumstances, to adequately evaluate the appropriateness of care. In general, reports of claims data analyses should include clear descriptions of the following methodological elements: the data source, the inclusion and exclusion criteria, the specific billing codes used, and the potential confounding factors incorporated in the multivariable models. Conclusions The use of claims data for research is expected to increase with the enhanced availability of data from Medicare and other sources. The use of claims data to evaluate resource use and efficiency and to determine the basis for supplementary payment methods for physicians is anticipated. Thus, it will be increasingly important for eye care providers to use accurate and descriptive codes for billing. Adherence to general guidance on the reporting of claims data analyses, as outlined in this article, is important to enhance the credibility and applicability of findings. Guidance on optimal ways to conduct and report ophthalmology-related investigations using claims data will likely continue to evolve as health services researchers refine the metrics to analyze large administrative data sets. PMID:24433971

An Item-Driven Adaptive Design for Calibrating Pretest Items. Research Report. ETS RR-14-38

ERIC Educational Resources Information Center

Ali, Usama S.; Chang, Hua-Hua

2014-01-01

Adaptive testing is advantageous in that it provides more efficient ability estimates with fewer items than linear testing does. Item-driven adaptive pretesting may also offer similar advantages, and verification of such a hypothesis about item calibration was the main objective of this study. A suitability index (SI) was introduced to adaptively…

Effects of Virtual Education on Academic Culture: Perceived Advantages and Disadvantages

ERIC Educational Resources Information Center

Jefferson, Renee N.; Arnold, Liz W.

2009-01-01

The perceived advantages and disadvantages of courses taught in online and face-to-face learning environments were explored for students taking an accounting and a data collection and analysis course. Both courses were taught in a face-to-face learning environment at the main or satellite campus. It was hypothesized that there would be…

[The progress in speciation analysis of trace elements by atomic spectrometry].

PubMed

Wang, Zeng-Huan; Wang, Xu-Nuo; Ke, Chang-Liang; Lin, Qin

2013-12-01

The main purpose of the present work is to review the different non-chromatographic methods for the speciation analysis of trace elements in geological, environmental, biological and medical areas. In this paper, the sample processing methods in speciation analysis were summarized, and the main strategies for non-chromatographic technique were evaluated. The basic principles of the liquid extractions proposed in the published literatures recently and their advantages and disadvantages were discussed, such as conventional solvent extraction, cloud point extraction, single droplet microextraction, and dispersive liquid-liquid microextraction. Solid phase extraction, as a non-chromatographic technique for speciation analysis, can be used in batch or in flow detection, and especially suitable for the online connection to atomic spectrometric detector. The developments and applications of sorbent materials filled in the columns of solid phase extraction were reviewed. The sorbents include chelating resins, nanometer materials, molecular and ion imprinted materials, and bio-sorbents. Other techniques, e. g. hydride generation technique and coprecipitation, were also reviewed together with their main applications.

Advantages and disadvantages of the animal models v. in vitro studies in iron metabolism: a review.

PubMed

García, Y; Díaz-Castro, J

2013-10-01

Iron deficiency is the most common nutritional deficiency in the world. Special molecules have evolved for iron acquisition, transport and storage in soluble, nontoxic forms. Studies about the effects of iron on health are focused on iron metabolism or nutrition to prevent or treat iron deficiency and anemia. These studies are focused in two main aspects: (1) basic studies to elucidate iron metabolism and (2) nutritional studies to evaluate the efficacy of iron supplementation to prevent or treat iron deficiency and anemia. This paper reviews the advantages and disadvantages of the experimental models commonly used as well as the methods that are more used in studies related to iron. In vitro studies have used different parts of the gut. In vivo studies are done in humans and animals such as mice, rats, pigs and monkeys. Iron metabolism is a complex process that includes interactions at the systemic level. In vitro studies, despite physiological differences to humans, are useful to increase knowledge related to this essential micronutrient. Isotopic techniques are the most recommended in studies related to iron, but their high cost and required logistic, making them difficult to use. The depletion-repletion of hemoglobin is a method commonly used in animal studies. Three depletion-repletion techniques are mostly used: hemoglobin regeneration efficiency, relative biological values (RBV) and metabolic balance, which are official methods of the association of official analytical chemists. These techniques are well-validated to be used as studies related to iron and their results can be extrapolated to humans. Knowledge about the main advantages and disadvantages of the in vitro and animal models, and methods used in these studies, could increase confidence of researchers in the experimental results with less costs.

Gene-environment studies: any advantage over environmental studies?

PubMed

Bermejo, Justo Lorenzo; Hemminki, Kari

2007-07-01

Gene-environment studies have been motivated by the likely existence of prevalent low-risk genes that interact with common environmental exposures. The present study assessed the statistical advantage of the simultaneous consideration of genes and environment to investigate the effect of environmental risk factors on disease. In particular, we contemplated the possibility that several genes modulate the environmental effect. Environmental exposures, genotypes and phenotypes were simulated according to a wide range of parameter settings. Different models of gene-gene-environment interaction were considered. For each parameter combination, we estimated the probability of detecting the main environmental effect, the power to identify the gene-environment interaction and the frequency of environmentally affected individuals at which environmental and gene-environment studies show the same statistical power. The proportion of cases in the population attributable to the modeled risk factors was also calculated. Our data indicate that environmental exposures with weak effects may account for a significant proportion of the population prevalence of the disease. A general result was that, if the environmental effect was restricted to rare genotypes, the power to detect the gene-environment interaction was higher than the power to identify the main environmental effect. In other words, when few individuals contribute to the overall environmental effect, individual contributions are large and result in easily identifiable gene-environment interactions. Moreover, when multiple genes interacted with the environment, the statistical benefit of gene-environment studies was limited to those studies that included major contributors to the gene-environment interaction. The advantage of gene-environment over plain environmental studies also depends on the inheritance mode of the involved genes, on the study design and, to some extend, on the disease prevalence.

It was/wasn't everything I had imagined: advantages and disadvantages after kidney transplantation.

PubMed

Santos, Bianca Pozza Dos; Viegas, Aline da Costa; Feijó, Aline Machado; Lise, Fernanda; Schwartz, Eda

2016-10-31

To know the advantages and difficulties that people with chronic kidney disease experience after renal transplantation. A qualitative and descriptive study with 20 kidney transplant patients in a city in Southern Brazil, from May to July of 2013. Semi-structured interviews were used, analyzed according to the critical incident technique. The main advantages were presented in the similarity to "normal" living: advantages resulting from the kidney transplant category, related to the patient's discharge from dialysis, food and water restriction, among others. The difficulties were presented in the permanent chronic condition and the need for care category. The advantages and disadvantages depend on each person's experience. The health professionals need to understand and promote health actions that promote the uniqueness and context of renal transplant.

Cornea and ocular lens visualized with three-dimensional confocal microscopy

NASA Astrophysics Data System (ADS)

Masters, Barry R.

1992-08-01

This paper demonstrates the advantages of three-dimensional reconstruction of the cornea and the ocular crystalline lens by confocal microscopy and volume rendering computer techniques. The advantages of noninvasive observation of ocular structures in living, unstained, unfixed tissue include the following: the tissue is in a natural living state without the artifacts of fixation, mechanical sectioning, and staining; the three-dimensional structure can be observed from any view point and quantitatively analyzed; the dynamics of morphological changes can be studied; and the use of confocal microscopic observation results in a reduction of the number of animals required for ocular morphometric studies. The main advantage is that the dynamic morphology of ocular structures can be investigated in living ocular tissue. A laser scanning confocal microscope was used in the reflected light mode to obtain the two- dimensional images from the cornea and the ocular lens of a freshly enucleated rabbit eye. The light source was an argon ion laser with 488 nm wavelength. The microscope objective was a Leitz 25X, NA 0.6 water immersion lens. The 400 micron thick cornea was optically sectioned into 133, three micron sections. The semi-transparent cornea and the in-situ ocular lens was visualized as high resolution, high contrast two-dimensional images. The under sampling resulted in a three-dimensional visualization rendering in which the corneal thickness (z-axis) is compressed. The structures observed in the cornea include: superficial epithelial cells and their nuclei, basal epithelial cells and their `beaded' cell borders, basal lamina, nerve plexus, nerve fibers, free nerve endings in the basal epithelial cells, nuclei of stromal keratocytes, and endothelial cells. The structures observed in the in-situ ocular lens include: lens capsule, lens epithelial cells, and individual lens fibers.

Advantages and Disadvantages of Transtibial, Anteromedial Portal, and Outside-In Femoral Tunnel Drilling in Single-Bundle Anterior Cruciate Ligament Reconstruction: A Systematic Review.

PubMed

Robin, Brett N; Jani, Sunil S; Marvil, Sean C; Reid, John B; Schillhammer, Carl K; Lubowitz, James H

2015-07-01

Controversy exists regarding the best method for creating the knee anterior cruciate ligament (ACL) femoral tunnel or socket. The purpose of this study was to systematically review the risks, benefits, advantages, and disadvantages of the endoscopic transtibial (TT) technique, anteromedial portal technique, outside-in technique, and outside-in retrograde drilling technique for creating the ACL femoral tunnel. A PubMed search of English-language studies published between January 1, 2000, and February 17, 2014, was performed using the following keywords: "anterior cruciate ligament" AND "femoral tunnel." Included were studies reporting risks, benefits, advantages, and/or disadvantages of any ACL femoral technique. In addition, references of included articles were reviewed to identify potential studies missed in the original search. A total of 27 articles were identified through the search. TT technique advantages include familiarity and proven long-term outcomes; disadvantages include the risk of nonanatomic placement because of constrained (TT) drilling. Anteromedial portal technique advantages include unconstrained anatomic placement; disadvantages include technical challenges, short tunnels or sockets, and posterior-wall blowout. Outside-in technique advantages include unconstrained anatomic placement; disadvantages include the need for 2 incisions. Retrograde drilling technique advantages include unconstrained anatomic placement, as well as all-epiphyseal drilling in skeletally immature patients; disadvantages include the need for fluoroscopy for all-epiphyseal drilling. There is no one, single, established "gold-standard" technique for creation of the ACL femoral socket. Four accepted techniques show diverse and subjective advantages, disadvantages, risks, and benefits. Level V, systematic review of Level II through V evidence. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Applications of the conjugate gradient FFT method in scattering and radiation including simulations with impedance boundary conditions

NASA Technical Reports Server (NTRS)

Barkeshli, Kasra; Volakis, John L.

1991-01-01

The theoretical and computational aspects related to the application of the Conjugate Gradient FFT (CGFFT) method in computational electromagnetics are examined. The advantages of applying the CGFFT method to a class of large scale scattering and radiation problems are outlined. The main advantages of the method stem from its iterative nature which eliminates a need to form the system matrix (thus reducing the computer memory allocation requirements) and guarantees convergence to the true solution in a finite number of steps. Results are presented for various radiators and scatterers including thin cylindrical dipole antennas, thin conductive and resistive strips and plates, as well as dielectric cylinders. Solutions of integral equations derived on the basis of generalized impedance boundary conditions (GIBC) are also examined. The boundary conditions can be used to replace the profile of a material coating by an impedance sheet or insert, thus, eliminating the need to introduce unknown polarization currents within the volume of the layer. A general full wave analysis of 2-D and 3-D rectangular grooves and cavities is presented which will also serve as a reference for future work.

Advantages and limitations of Internet-based interventions for common mental disorders

PubMed Central

Andersson, Gerhard; Titov, Nickolai

2014-01-01

Several Internet interventions have been developed and tested for common mental disorders, and the evidence to date shows that these treatments often result in similar outcomes as in face-to-face psychotherapy and that they are cost-effective. In this paper, we first review the pros and cons of how participants in Internet treatment trials have been recruited. We then comment on the assessment procedures often involved in Internet interventions and conclude that, while online questionnaires yield robust results, diagnoses cannot be determined without any contact with the patient. We then review the role of the therapist and conclude that, although treatments including guidance seem to lead to better outcomes than unguided treatments, this guidance can be mainly practical and supportive rather than explicitly therapeutic in orientation. Then we briefly describe the advantages and disadvantages of treatments for mood and anxiety disorders and comment on ways to handle comorbidity often associated with these disorders. Finally we discuss challenges when disseminating Internet interventions. In conclusion, there is now a large body of evidence suggesting that Internet interventions work. Several research questions remain open, including how Internet interventions can be blended with traditional forms of care. PMID:24497236

Quantum communication complexity advantage implies violation of a Bell inequality

PubMed Central

Buhrman, Harry; Czekaj, Łukasz; Grudka, Andrzej; Horodecki, Michał; Horodecki, Paweł; Markiewicz, Marcin; Speelman, Florian; Strelchuk, Sergii

2016-01-01

We obtain a general connection between a large quantum advantage in communication complexity and Bell nonlocality. We show that given any protocol offering a sufficiently large quantum advantage in communication complexity, there exists a way of obtaining measurement statistics that violate some Bell inequality. Our main tool is port-based teleportation. If the gap between quantum and classical communication complexity can grow arbitrarily large, the ratio of the quantum value to the classical value of the Bell quantity becomes unbounded with the increase in the number of inputs and outputs. PMID:26957600

Pharmacogenetics of novel oral anticoagulants: a review of identified gene variants & future perspectives.

PubMed

Ašić, Adna; Marjanović, Damir; Mirat, Jure; Primorac, Dragan

2018-05-16

Novel oral anticoagulants (NOACs) are becoming a therapy of choice in everyday clinical practice after almost 50 years during which warfarin and related coumarin derivatives were used as the main anticoagulants. Advantages of NOACs over standard anticoagulants include their predictable pharmacodynamics and pharmacokinetics, stable plasma concentrations and less drug-drug and food-drug interactions. However, pharmacogenetics has its place in administration of NOACs, as considerable interindividual variations have been detected. In this review, previous findings in pharmacogenetics of dabigatran, rivaroxaban, apixaban and edoxaban are summarized, along with recommendations for studying genes encoding metabolically important enzymes for four selected NOACs. Future directions include identification of clinically relevant SNPs, and change in optimum dosage for patients who are carriers of significant variants.

Evaluation of subsurface damage in concrete deck joints using impact echo method

DOE PAGES

Rickard, Larry; Choi, Wonchang

2016-01-01

Many factors can affect the overall performance and longevity of highway bridges, including the integrity of their deck joints. This study focuses on the evaluation of subsurface damage in deteriorated concrete deck joints, which includes the delamination and corrosion of the reinforcement. Impact echo and surface wave technology, mainly a portable seismic property analyzer (PSPA), were employed to evaluate the structural deficiency of concrete joints. Laboratory tests of core samples were conducted to verify the nondestructive test results. As a result, the primary advantage of the PSPA as a bridge assessment tool lies in its ability to assess the concrete’smore » modulus and to detect subsurface defects at a particular point simultaneously.« less

Epidemiology of Uterine Fibroids – From Menarche to Menopause

PubMed Central

Wise, Lauren A.; Laughlin-Tommaso, Shannon K.

2015-01-01

Uterine leiomyomata (UL) have a substantial impact on women's health, but relatively few studies have identified opportunities for primary prevention of these neoplasms. Most established risk factors are not modifiable, including premenopausal age, African ancestry, age at menarche, and childbearing history. The main challenge in studying UL is that a large proportion of tumors are asymptomatic. Herein, we review the epidemiology of UL from published studies to date. We highlight the advantages of ultrasound screening studies and the ways in which their innovative methods have helped clarify the etiology of disease. We conclude with a discussion of promising new hypotheses. PMID:26744813

Complex Synchronization Phenomena in Ecological Systems

NASA Astrophysics Data System (ADS)

Stone, Lewi; Olinky, Ronen; Blasius, Bernd; Huppert, Amit; Cazelles, Bernard

2002-07-01

Ecological and biological systems provide us with many striking examples of synchronization phenomena. Here we discuss a number of intriguing cases and attempt to explain them taking advantage of a modelling framework. One main focus will concern synchronized ecological end epidemiological cycles which have Uniform Phase growth associated with their regular recurrence, and Chaotic Amplitudes - a feature we term UPCA. Examples come from different areas and include decadal cycles of small mammals, recurrent viral epidemics such as childhood infections (eg., measles), and seasonally driven phytoplankton blooms observed in lakes and the oceans. A more detailed theoretical analysis of seasonally synchronized chaotic population cycles is presented.

Percutaneous epidural neurostimulation in modulation of paraplegic spasticity. Six case reports.

PubMed

Richardson, R R; Cerullo, L J; McLone, D G; Gutierrez, F A; Lewis, V

1979-01-01

Six cases of paraplegic, post-traumatic spasticity, alleviated by percutaneous epidural neurostimulation with temporary or permanent implanted neuroelectrodes from the L1 to L4 intervertebral levels are presented. Modulation of this spasticity and secondary beneficial physiological effects were achieved, including regulation of bowel regimens, production of sweating and piloerection below the level of the lesion, and morning erections. The main advantages of percutaneous epidural neurostimulation in modulating spasticity are the avoidance of destructive neurosurgical procedures, the regulation of secondary physiological and autonomic responses, the avoidance of antispasticity medications, and the reversibility of the neurostimulation procedure.

Effects of biotechnology on biodiversity: herbicide-tolerant and insect-resistant GM crops.

PubMed

Ammann, Klaus

2005-08-01

Biodiversity is threatened by agriculture as a whole, and particularly also by traditional methods of agriculture. Knowledge-based agriculture, including GM crops, can reduce this threat in the future. The introduction of no-tillage practices, which are beneficial for soil fertility, has been encouraged by the rapid spread of herbicide-tolerant soybeans in the USA. The replacement of pesticides through Bt crops is advantageous for the non-target insect fauna in test-fields. The results of the British Farm Scale experiment are discussed. Biodiversity differences can mainly be referred to as differences in herbicide application management.

Generalized Dicke Nonequilibrium Dynamics in Trapped Ions

NASA Astrophysics Data System (ADS)

Genway, Sam; Li, Weibin; Ates, Cenap; Lanyon, Benjamin P.; Lesanovsky, Igor

2014-01-01

We explore trapped ions as a setting to investigate nonequilibrium phases in a generalized Dicke model of dissipative spins coupled to phonon modes. We find a rich dynamical phase diagram including superradiantlike regimes, dynamical phase coexistence, and phonon-lasing behavior. A particular advantage of trapped ions is that these phases and transitions among them can be probed in situ through fluorescence. We demonstrate that the main physical insights are captured by a minimal model and consider an experimental realization with Ca+ ions trapped in a linear Paul trap with a dressing scheme to create effective two-level systems with a tunable dissipation rate.

Physical treatment of fever

PubMed Central

Purssell, E.

2000-01-01

Fever is a common symptom of childhood illness, and much time and effort is spent in the pursuit of reducing high temperature. Although antipyretic drugs are the main form of treatment, this report considers the part that physical treatments might play in reducing the temperature of febrile children. Such treatments include tepid sponging, removing clothing, and cooling the environment. Of these treatments, tepid sponging has been studied most extensively, as an addition to paracetamol, but seems to offer little advantage over paracetamol alone. It is likely that other methods might be equally ineffective because they all rely on similar methods of heat loss.

 PMID:10685930

Computing Evans functions numerically via boundary-value problems

NASA Astrophysics Data System (ADS)

Barker, Blake; Nguyen, Rose; Sandstede, Björn; Ventura, Nathaniel; Wahl, Colin

2018-03-01

The Evans function has been used extensively to study spectral stability of travelling-wave solutions in spatially extended partial differential equations. To compute Evans functions numerically, several shooting methods have been developed. In this paper, an alternative scheme for the numerical computation of Evans functions is presented that relies on an appropriate boundary-value problem formulation. Convergence of the algorithm is proved, and several examples, including the computation of eigenvalues for a multi-dimensional problem, are given. The main advantage of the scheme proposed here compared with earlier methods is that the scheme is linear and scalable to large problems.

Functional conjugated pyridines via main-group element tuning.

PubMed

Stolar, Monika; Baumgartner, Thomas

2018-03-29

Pyridine-based materials have seen widespread attention for the development of n-type organic materials. In recent years, the incorporation of main-group elements has also explored significant advantages for the development and tunability of organic conjugated materials. The unique chemical and electronic structure of main-group elements has led to several enhancements in conventional organic materials. This Feature article highlights recent main-group based pyridine materials by discussing property enhancements and application in organic electronics.

A Hybrid On-line Verification Method of Relay Setting

NASA Astrophysics Data System (ADS)

Gao, Wangyuan; Chen, Qing; Si, Ji; Huang, Xin

2017-05-01

Along with the rapid development of the power industry, grid structure gets more sophisticated. The validity and rationality of protective relaying are vital to the security of power systems. To increase the security of power systems, it is essential to verify the setting values of relays online. Traditional verification methods mainly include the comparison of protection range and the comparison of calculated setting value. To realize on-line verification, the verifying speed is the key. The verifying result of comparing protection range is accurate, but the computation burden is heavy, and the verifying speed is slow. Comparing calculated setting value is much faster, but the verifying result is conservative and inaccurate. Taking the overcurrent protection as example, this paper analyses the advantages and disadvantages of the two traditional methods above, and proposes a hybrid method of on-line verification which synthesizes the advantages of the two traditional methods. This hybrid method can meet the requirements of accurate on-line verification.

Laboratory implementation of edge illumination X-ray phase-contrast imaging with energy-resolved detectors

NASA Astrophysics Data System (ADS)

Diemoz, P. C.; Endrizzi, M.; Vittoria, F. A.; Hagen, C. K.; Kallon, G.; Basta, D.; Marenzana, M.; Delogu, P.; Vincenzi, A.; De Ruvo, L.; Spandre, G.; Brez, A.; Bellazzini, R.; Olivo, A.

2015-03-01

Edge illumination (EI) X-ray phase-contrast imaging (XPCI) has potential for applications in different fields of research, including materials science, non-destructive industrial testing, small-animal imaging, and medical imaging. One of its main advantages is the compatibility with laboratory equipment, in particular with conventional non-microfocal sources, which makes its exploitation in normal research laboratories possible. In this work, we demonstrate that the signal in laboratory implementations of EI can be correctly described with the use of the simplified geometrical optics. Besides enabling the derivation of simple expressions for the sensitivity and spatial resolution of a given EI setup, this model also highlights the EI's achromaticity. With the aim of improving image quality, as well as to take advantage of the fact that all energies in the spectrum contribute to the image contrast, we carried out EI acquisitions using a photon-counting energy-resolved detector. The obtained results demonstrate that this approach has great potential for future laboratory implementations of EI.

Advantages of High vs. Low Earth Orbit for SIRTF

NASA Technical Reports Server (NTRS)

Eisenhardt, Peter; Werner, Michael W.

1989-01-01

While the subject of this workshop, which we will refer to as ET (for Enlightenment Telescope), is a dazzling successor to the Hubble Space Telescope, its location is unlikely to be the Low Earth Orbit (LEO) used by HST. Locations suggested for ET include High Earth Orbit (HEO) and the moon. The first space telescope to occupy HEO will be the liquid helium cooled Space Infrared Telescope Facility (SIRTF). The selection of HEO for SIRTF was the outcome of a recent study led by the Ames Research Center which showed significant advantages for SIRTF in HEO vs. LEO. This article summarizes the main results of that study. We begin with a review of SIRTF's rationale and requirements, in part because the IR capabilities and low temperature proposed for ET make it something of a successor to SIRTF as well as to HST. We conclude with some comments about another possible location for both SIRTF and ET, the Earth-Sun L2 Lagrangian point.

Optical bistability for optical signal processing and computing

NASA Astrophysics Data System (ADS)

Peyghambarian, N.; Gibbs, H. M.

1985-02-01

Optical bistability (OB) is a phenomenon in which a nonlinear medium responds to an optical input beam by changing its transmission abruptly from one value to another. A 'nonlinear medium' is a medium in which the index of refraction depends on the incident light intensity. A device is said to be optically bistable if two stable output states exist for the same value of the input. Optically bistable devices can perform a number of logic functions related to optical memory, optical transistor, optical discriminator, optical limiter, optical oscillator, and optical gate. They also have the potential for subpicosecond switching, greatly exceeding the capability of electronics. This potential is one of several advantages of optical data processing over electronic processing. Other advantages are greater immunity to electromagnetic interference and crosstalk, and highly parallel processing capability. The present investigation is mainly concerned with all-optical etalon devices. The considered materials, include GaAs, ZnS and ZnSe, CuCl, InSb, InAs, and CdS.

Human-Computer Interaction Based on Hand Gestures Using RGB-D Sensors

PubMed Central

Palacios, José Manuel; Sagüés, Carlos; Montijano, Eduardo; Llorente, Sergio

2013-01-01

In this paper we present a new method for hand gesture recognition based on an RGB-D sensor. The proposed approach takes advantage of depth information to cope with the most common problems of traditional video-based hand segmentation methods: cluttered backgrounds and occlusions. The algorithm also uses colour and semantic information to accurately identify any number of hands present in the image. Ten different static hand gestures are recognised, including all different combinations of spread fingers. Additionally, movements of an open hand are followed and 6 dynamic gestures are identified. The main advantage of our approach is the freedom of the user's hands to be at any position of the image without the need of wearing any specific clothing or additional devices. Besides, the whole method can be executed without any initial training or calibration. Experiments carried out with different users and in different environments prove the accuracy and robustness of the method which, additionally, can be run in real-time. PMID:24018953

Sampling Methods in Cardiovascular Nursing Research: An Overview.

PubMed

Kandola, Damanpreet; Banner, Davina; O'Keefe-McCarthy, Sheila; Jassal, Debbie

2014-01-01

Cardiovascular nursing research covers a wide array of topics from health services to psychosocial patient experiences. The selection of specific participant samples is an important part of the research design and process. The sampling strategy employed is of utmost importance to ensure that a representative sample of participants is chosen. There are two main categories of sampling methods: probability and non-probability. Probability sampling is the random selection of elements from the population, where each element of the population has an equal and independent chance of being included in the sample. There are five main types of probability sampling including simple random sampling, systematic sampling, stratified sampling, cluster sampling, and multi-stage sampling. Non-probability sampling methods are those in which elements are chosen through non-random methods for inclusion into the research study and include convenience sampling, purposive sampling, and snowball sampling. Each approach offers distinct advantages and disadvantages and must be considered critically. In this research column, we provide an introduction to these key sampling techniques and draw on examples from the cardiovascular research. Understanding the differences in sampling techniques may aid nurses in effective appraisal of research literature and provide a reference pointfor nurses who engage in cardiovascular research.

Radiofrequency ablation of hepatocellular carcinoma: pros and cons.

PubMed

Rhim, Hyunchul; Lim, Hyo K

2010-09-01

Among locoregional treatments for hepatocellular carcinoma (HCC), radiofrequency ablation (RFA) has been accepted as the most popular alternative to curative transplantation or resection, and it shows an excellent local tumor control rate and acceptable morbidity. The benefits of RFA have been universally validated by the practice guidelines of international societies of hepatology. The main advantages of RFA include 1) it is minimally invasive with acceptable morbidity, 2) it enables excellent local tumor control, 3) it has promising long-term survival, and 4) it is a multimodal approach. Based on these pros, RFA will play an important role in managing the patient with early HCC (smaller than 3 cm with fewer than four tumors). The main limitations of current RFA technology in hepatic ablation include 1) limitation of ablation volume, 2) technically infeasible in some tumors due to conspicuity and dangerous location, and 3) the heat-sink effect. Many technical approaches have been introduced to overcome those limitations, including a novel guiding modality, use of artificial fluid or air, and combined treatment strategies. RFA will continue to play a role as a representative ablative modality in the management of HCC, even in the era of targeted agents.

Radiofrequency Ablation of Hepatocellular Carcinoma: Pros and Cons

PubMed Central

Lim, Hyo K.

2010-01-01

Among locoregional treatments for hepatocellular carcinoma (HCC), radiofrequency ablation (RFA) has been accepted as the most popular alternative to curative transplantation or resection, and it shows an excellent local tumor control rate and acceptable morbidity. The benefits of RFA have been universally validated by the practice guidelines of international societies of hepatology. The main advantages of RFA include 1) it is minimally invasive with acceptable morbidity, 2) it enables excellent local tumor control, 3) it has promising long-term survival, and 4) it is a multimodal approach. Based on these pros, RFA will play an important role in managing the patient with early HCC (smaller than 3 cm with fewer than four tumors). The main limitations of current RFA technology in hepatic ablation include 1) limitation of ablation volume, 2) technically infeasible in some tumors due to conspicuity and dangerous location, and 3) the heat-sink effect. Many technical approaches have been introduced to overcome those limitations, including a novel guiding modality, use of artificial fluid or air, and combined treatment strategies. RFA will continue to play a role as a representative ablative modality in the management of HCC, even in the era of targeted agents. PMID:21103289

Semiconductor laser technology for remote sensing experiments

NASA Technical Reports Server (NTRS)

Katz, Joseph

1988-01-01

Semiconductor injection lasers are required for implementing virtually all spaceborne remote sensing systems. Their main advantages are high reliability and efficiency, and their main roles are envisioned in pumping and injection locking of solid state lasers. In some shorter range applications they may even be utilized directly as the sources.

Educational Change in Saudi Arabia

ERIC Educational Resources Information Center

Alnahdi, Ghaleb Hamad

2014-01-01

The main goal of this article is to discuss the possibility of adapting the suggestions by Hargreaves and Shirley (2009) in their book "The Fourth Way." This paper will discuss the topic of educational change and reform through three main points. First, it will review the most important advantages and disadvantages that characterize the…

The main factor affecting the competitiveness of Contractor Company

NASA Astrophysics Data System (ADS)

Nurisra; Malahayati, Nurul; Mahmuddin

2018-05-01

Contractor companies must have the competitive advantage to compete in maintaining the survival of the company. Problems arise because quite a lot of advantages can be used and these advantages must be used appropriately to produce competitiveness for the company to continue to compete and to win the competition. This study aims to determine the main factors affecting the competitiveness of medium-class contractors in Banda Aceh. Data collection was obtained through questionnaires distributed to 31 middle-class contractors in Banda Aceh. Data processing and analysis is done by using descriptive analysis. Based on the result of descriptive analysis, it can be concluded that the most important competitiveness factor with a mean score value 4.52 is the relationship, and the factor that has the highest mean score value is the relationship with the government of 4.97, while the result of the ranking analysis is obtained 25 factor that is critical to the competitiveness of medium-class contractors in Banda Aceh.

Study on the syhthesis process of tetracaine hydrochloride

NASA Astrophysics Data System (ADS)

Li, Wenli; Zhao, Jie; Cui, Yujie

2017-05-01

Tetrachloride hydrochloride is a local anesthetic with long-acting ester, and it is usually present in the form of a hydrochloride salt. Firsleb first synthesized the tetracaine by experiment in 1928, which is one of the recognized clinical potent anesthetics. This medicine has the advantages of stable physical and chemical properties, the rapid role and long maintenance. Tetracaine is also used for ophthalmic surface anesthesia as one of the main local anesthetic just like conduction block anesthesia, mucosal surface anesthesia and epidural anesthesia. So far, the research mainly engaged in its clinical application research, and the research strength is relatively small in the field of synthetic technology. The general cost of the existing production process is high, and the yield is low. In addition, the reaction time is long and the reaction conditions are harsh. In this paper, a new synthetic method was proposed for the synthesis of tetracaine hydrochloride. The reaction route has the advantages of few steps, high yield, short reaction time and mild reaction conditions. The cheap p-nitrobenzoic acid was selected as raw material. By esterification with ethanol and reaction with n-butyraldehyde (the reaction process includes nitro reduction, aldol condensation and hydrogenation reduction), the intermediate was transesterified with dimethylaminoethanol under basic conditions. Finally, the PH value was adjusted in the ethanol solvent. After experiencing 4 steps reaction, the crude tetracaine hydrochloride was obtained.

REU Programs at Field Research Stations Offer Unique Advantages that may Enhance Retention of Students in STEM Fields.

NASA Astrophysics Data System (ADS)

Kim, D. Y.; Marinelli, R. L.; Heidelberg, K., IV

2014-12-01

Studies have shown that undergraduate participation in research opportunities strengthens the retention of students in STEM fields. Increasing students' confidence levels in their scientific abilities, aiding in the development of their scientific identity, and strengthening their sense of belonging to a scientific community have been cited as important contributing factors. Research field stations offer unique advantages that amplify these benefits by challenging students to plan and work in the field, enhancing networking opportunities with multi-disciplinary professionals from numerous institutions and hierarchical levels, and creating a stronger sense of belonging and comradery within a science community. The USC Wrigley Institute for Environmental Studies' (WIES) Research Experiences for Undergraduates (REU) program is an 8-week program that begins on the main USC campus in Los Angeles and moves to a marine field station on Catalina Island during weeks 2-7, before returning to the mainland to complete the last week of the program. This unique model provides REU students with an opportunity to become integrated into faculty mentors' labs on the main campus, while exposing them to life as a researcher at a field station, both of which contribute significantly to the students' development as a scientist. Here, we present the WIES REU model and include a discussion of benefits and challenges to this unique infrastructure.

Diagnosis of human fascioliasis by stool and blood techniques: update for the present global scenario.

PubMed

Mas-Coma, S; Bargues, M D; Valero, M A

2014-12-01

Before the 1990s, human fascioliasis diagnosis focused on individual patients in hospitals or health centres. Case reports were mainly from developed countries and usually concerned isolated human infection in animal endemic areas. From the mid-1990s onwards, due to the progressive description of human endemic areas and human infection reports in developing countries, but also new knowledge on clinical manifestations and pathology, new situations, hitherto neglected, entered in the global scenario. Human fascioliasis has proved to be pronouncedly more heterogeneous than previously thought, including different transmission patterns and epidemiological situations. Stool and blood techniques, the main tools for diagnosis in humans, have been improved for both patient and survey diagnosis. Present availabilities for human diagnosis are reviewed focusing on advantages and weaknesses, sample management, egg differentiation, qualitative and quantitative diagnosis, antibody and antigen detection, post-treatment monitoring and post-control surveillance. Main conclusions refer to the pronounced difficulties of diagnosing fascioliasis in humans given the different infection phases and parasite migration capacities, clinical heterogeneity, immunological complexity, different epidemiological situations and transmission patterns, the lack of a diagnostic technique covering all needs and situations, and the advisability for a combined use of different techniques, at least including a stool technique and a blood technique.

The Bell Curve and the Future of Literacy: If This Is the Answer, What Is the Question?

ERIC Educational Resources Information Center

Wahlstrom, Ralph

This paper takes the position that the main premise of "The Bell Curve" (by Richard Murray and Charles Herrnstein) is that significant advantages exist for possessing an IQ toward the top of the range--advantages that pertain to school success, career, and income. The premise is that people with high IQs have naturally acquired scholarly…

The Mismatch between the Unmet Need for and Supply of Occupational English Skills: An Investigation of Higher Educated Government Staff in Norway

ERIC Educational Resources Information Center

Hellekjaer, Glenn Ole; Fairway, Tone

2015-01-01

Nordic universities are involved in a global competition against American and UK universities, whose main competitive advantage is their placement in English-speaking countries. The authors argue that Nordic universities need to do more to offset this advantage than merely offer English-Medium (EM) courses to foreign and domestic students. They…

Strengthening health information systems to address health equity challenges.

PubMed Central

Nolen, Lexi Bambas; Braveman, Paula; Dachs, J. Norberto W.; Delgado, Iris; Gakidou, Emmanuela; Moser, Kath; Rolfe, Liz; Vega, Jeanette; Zarowsky, Christina

2005-01-01

Special studies and isolated initiatives over the past several decades in low-, middle- and high-income countries have consistently shown inequalities in health among socioeconomic groups and by gender, race or ethnicity, geographical area and other measures associated with social advantage. Significant health inequalities linked to social (dis)advantage rather than to inherent biological differences are generally considered unfair or inequitable. Such health inequities are the main object of health development efforts, including global targets such as the Millennium Development Goals, which require monitoring to evaluate progress. However, most national health information systems (HIS) lack key information needed to assess and address health inequities, namely, reliable, longitudinal and representative data linking measures of health with measures of social status or advantage at the individual or small-area level. Without empirical documentation and monitoring of such inequities, as well as country-level capacity to use this information for effective planning and monitoring of progress in response to interventions, movement towards equity is unlikely to occur. This paper reviews core information requirements and potential databases and proposes short-term and longer term strategies for strengthening the capabilities of HIS for the analysis of health equity and discusses HIS-related entry points for supporting a culture of equity-oriented decision-making and policy development. PMID:16184279

Differences in holistic processing do not explain cultural differences in the recognition of facial expression.

PubMed

Yan, Xiaoqian; Young, Andrew W; Andrews, Timothy J

2017-12-01

The aim of this study was to investigate the causes of the own-race advantage in facial expression perception. In Experiment 1, we investigated Western Caucasian and Chinese participants' perception and categorization of facial expressions of six basic emotions that included two pairs of confusable expressions (fear and surprise; anger and disgust). People were slightly better at identifying facial expressions posed by own-race members (mainly in anger and disgust). In Experiment 2, we asked whether the own-race advantage was due to differences in the holistic processing of facial expressions. Participants viewed composite faces in which the upper part of one expression was combined with the lower part of a different expression. The upper and lower parts of the composite faces were either aligned or misaligned. Both Chinese and Caucasian participants were better at identifying the facial expressions from the misaligned images, showing interference on recognizing the parts of the expressions created by holistic perception of the aligned composite images. However, this interference from holistic processing was equivalent across expressions of own-race and other-race faces in both groups of participants. Whilst the own-race advantage in recognizing facial expressions does seem to reflect the confusability of certain emotions, it cannot be explained by differences in holistic processing.

Health monitoring system for a tall building with Fiber Bragg grating sensors

NASA Astrophysics Data System (ADS)

Li, D. S.; Li, H. N.; Ren, L.; Guo, D. S.; Song, G. B.

2009-03-01

Fiber Bragg grating (FBG) sensors demonstrate great potentials for structural health monitoring of civil structures to ensure their structural integrity, durability and reliability. The advantages of applying fiber optic sensors to a tall building include their immunity of electromagnetic interference and multiplexing ability to transfer optical signals over a long distance. In the work, FBG sensors, including strain and temperature sensors, are applied to the construction monitoring of an 18-floor tall building starting from its construction date. The main purposes of the project are: 1) monitoring the temperature evolution history within the concrete during the pouring process; 2) measuring the variations of the main column strains on the underground floor while upper 18 floors were subsequently added on; and 3) monitoring the relative displacements between two foundation blocks. The FBG sensors have been installed and interrogated continuously for more than five months. Monitoring results of temperature and strains during the period are presented in the paper. Furthermore, the lag behavior between the concrete temperature and its surrounding air temperature is investigated.

Transition from a failing dentition to a removable implant-supported prosthesis: a staged approach.

PubMed

Cordaro, Luca; Torsello, Ferruccio; Ribeiro, Carlos Accorsi

2010-05-01

Patients with hopeless dentition often present difficulties in the management of the transitional phase to the final restoration. This article describes a staged approach to achieve a full-arch, implant-supported, removable prosthesis in patients with a hopeless dentition. The approach described allows the clinician to proceed in a staged manner and facilitate prosthetic steps by keeping fixed references for vertical dimension. This technique includes initial conservative periodontal care and, afterward, extraction of some strategic teeth, while others are temporarily maintained. At this point, the implants are positioned, and during the healing period, the remaining natural abutments are used for occlusal reference and to stabilize the removable provisional prosthesis. After osseointegration of the implants, the residual teeth are extracted and the final prosthesis is delivered. The main advantages of the technique include maintenance of function during treatment, stabilization of the removable provisional (especially in the mandibular arch), prosthetic-guided insertion of implants, and easier retrieval of prosthetic references. The main drawbacks are longer treatment time and the need for two surgical steps.

Implementation of High Speed Distributed Data Acquisition System

NASA Astrophysics Data System (ADS)

Raju, Anju P.; Sekhar, Ambika

2012-09-01

This paper introduces a high speed distributed data acquisition system based on a field programmable gate array (FPGA). The aim is to develop a "distributed" data acquisition interface. The development of instruments such as personal computers and engineering workstations based on "standard" platforms is the motivation behind this effort. Using standard platforms as the controlling unit allows independence in hardware from a particular vendor and hardware platform. The distributed approach also has advantages from a functional point of view: acquisition resources become available to multiple instruments; the acquisition front-end can be physically remote from the rest of the instrument. High speed data acquisition system transmits data faster to a remote computer system through Ethernet interface. The data is acquired through 16 analog input channels. The input data commands are multiplexed and digitized and then the data is stored in 1K buffer for each input channel. The main control unit in this design is the 16 bit processor implemented in the FPGA. This 16 bit processor is used to set up and initialize the data source and the Ethernet controller, as well as control the flow of data from the memory element to the NIC. Using this processor we can initialize and control the different configuration registers in the Ethernet controller in a easy manner. Then these data packets are sending to the remote PC through the Ethernet interface. The main advantages of the using FPGA as standard platform are its flexibility, low power consumption, short design duration, fast time to market, programmability and high density. The main advantages of using Ethernet controller AX88796 over others are its non PCI interface, the presence of embedded SRAM where transmit and reception buffers are located and high-performance SRAM-like interface. The paper introduces the implementation of the distributed data acquisition using FPGA by VHDL. The main advantages of this system are high accuracy, high speed, real time monitoring.

Interpreting the possible ecological role(s) of cyanotoxins: compounds for competitive advantage and/or physiological aide?

PubMed

Holland, Aleicia; Kinnear, Susan

2013-06-27

To date, most research on freshwater cyanotoxin(s) has focused on understanding the dynamics of toxin production and decomposition, as well as evaluating the environmental conditions that trigger toxin production, all with the objective of informing management strategies and options for risk reduction. Comparatively few research studies have considered how this information can be used to understand the broader ecological role of cyanotoxin(s), and the possible applications of this knowledge to the management of toxic blooms. This paper explores the ecological, toxicological, and genetic evidence for cyanotoxin production in natural environments. The possible evolutionary advantages of toxin production are grouped into two main themes: That of "competitive advantage" or "physiological aide". The first grouping illustrates how compounds produced by cyanobacteria may have originated from the need for a cellular defence mechanism, in response to grazing pressure and/or resource competition. The second grouping considers the contribution that secondary metabolites make to improved cellular physiology, through benefits to homeostasis, photosynthetic efficiencies, and accelerated growth rates. The discussion also includes other factors in the debate about possible evolutionary roles for toxins, such as different modes of exposures and effects on non-target (i.e., non-competitive) species. The paper demonstrates that complex and multiple factors are at play in driving evolutionary processes in aquatic environments. This information may provide a fresh perspective on managing toxic blooms, including the need to use a "systems approach" to understand how physico-chemical conditions, as well biological stressors, interact to trigger toxin production.

Heteronuclear Correlation SSNMR Spectroscopy with Indirect Detection under Fast Magic-Angle Spinning [Book Chapter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kobayshi, Takeshi; Nishiyama, Yusuke; Pruski, Marek

The main focus of this chapter is to address experimental strategies on the subject by providing a hands-on guide to fast MAS experiments, with a particular focus on indirect detection. Although our experience is limited to our respective laboratories in Ames and Yokohama, we hope that our descriptions of experimental setups and optimization procedures are sufficiently general to be applicable to all modern instruments. The chapter is organized as follows. Section 2 below introduces briefly the fast MAS technology and its main advantages. In Section 3, we describe the hardware associated with this remarkable technology and provide practical advices onmore » its use, including procedures for loading and unloading the samples, maintaining the probe, reducing t 1 noise, etc. In Section 4, we describe the principles and hands-on aspects of experiments involving the indirect detection of spin-1/2 and 14N nuclei« less

Quasi-Static and Dynamic Response Characteristics of F-4 Bias-Ply and Radial-Belted Main Gear Tires

NASA Technical Reports Server (NTRS)

Davis, Pamela A.

1997-01-01

An investigation was conducted at Langley Research Center to determine the quasi-static and dynamic response characteristics of F-4 military fighter 30x11.5-14.5/26PR bias-ply and radial-belted main gear tires. Tire properties were measured by the application of vertical, lateral, and fore-and-aft loads. Mass moment-of-inertia data were also obtained. The results of the study include quasi-static load-deflection curves, free-vibration time-history plots, energy loss associated with hysteresis, stiffness and damping characteristics, footprint geometry, and inertia properties of each type of tire. The difference between bias-ply and radial-belted tire construction is given, as well as the advantages and disadvantages of each tire design. Three simple damping models representing viscous, structural, and Coulomb friction are presented and compared with the experimental data. The conclusions discussed contain a summary of test observations.

Feasibility basis for use of new solid household waste processing equipment

NASA Astrophysics Data System (ADS)

Vertakova, Y. V.; Zvyagintsev, G. L.; Babich, T. N.; Polozhentseva, Y. S.

2017-10-01

Economic efficiency assessment of innovative organizational project of solid household waste processing enterprise (SHW) is given. A distinctive feature of this project is new mining and chemical technology use of waste depolymerization. The proved feature is fuel-resource production in portion modules of tubular type. They are patented and approved under laboratory conditions. The main ways of SHW processing in the world including Russia are described. Advantages and disadvantages are revealed. Comparative analysis is carried out. Technology prioritization is a result of this analysis. During organization of such enterprise, it was proved that not only SHW processing is a result of its functioning. The other result is environmentally friendly production using secondary raw materials. These products can be sold and can have bring income. Main investment and current expenses necessary for the offered project implementation are defined. This allows making economic assessment of innovative enterprise efficiency.

Modeling and prototyping of biometric systems using dataflow programming

NASA Astrophysics Data System (ADS)

Minakova, N.; Petrov, I.

2018-01-01

The development of biometric systems is one of the labor-intensive processes. Therefore, the creation and analysis of approaches and techniques is an urgent task at present. This article presents a technique of modeling and prototyping biometric systems based on dataflow programming. The technique includes three main stages: the development of functional blocks, the creation of a dataflow graph and the generation of a prototype. A specially developed software modeling environment that implements this technique is described. As an example of the use of this technique, an example of the implementation of the iris localization subsystem is demonstrated. A variant of modification of dataflow programming is suggested to solve the problem related to the undefined order of block activation. The main advantage of the presented technique is the ability to visually display and design the model of the biometric system, the rapid creation of a working prototype and the reuse of the previously developed functional blocks.

Main-Reflector Manufacturing Technology for the Deep Space Optical Communications Ground Station

NASA Technical Reports Server (NTRS)

Britcliffe, M. J.; Hoppe, D. J.

2001-01-01

The Deep Space Network (DSN) has plans to develop a 10-m-diameter optical communications receiving station. The system uses the direct detection technique, which has much different requirements from a typical astronomical telescope. The receiver must operate in daylight and nighttime conditions. This imposes special requirements on the optical system to reject stray light from the Sun and other sources. One of the biggest challenges is designing a main-reflector surface that meets these requirements and can be produced at a reasonable cost. The requirements for the performance of the reflector are presented. To date, an aspherical primary reflector has been assumed. A reflector with a spherical reflector has a major cost advantage over an aspherical design, with no sacrifice in performance. A survey of current manufacturing techniques for optical mirrors of this type was performed. Techniques including solid glass, lightweight glass, diamond-turned aluminum, and composite mirrors were investigated.

Fabrication of micro/nano-structures by electrohydrodynamic jet technique

NASA Astrophysics Data System (ADS)

Wang, Dazhi; Zhao, Xiaojun; Lin, Yigao; Ren, Tongqun; Liang, Junsheng; Liu, Chong; Wang, Liding

2017-12-01

Electrohydrodynamic jet (E-Jet) is an approach to the fabrication of micro/nano-structures by the use of electrical forces. In this process, the liquid is subjected to electrical and mechanical forces to form a liquid jet, which is further disintegrated into droplets. The major advantage of the E-Jet technique is that the sizes of the jet formed can be at the nanoscale far smaller than the nozzle size, which can realize high printing resolution with less risk of nozzle blockage. The E-Jet technique, which mainly includes E-Jet deposition and E-Jet printing, has a wide range of applications in the fabrication of micro/nano-structures for micro/nano-electromechanical system devices. This technique is also considered a micro/nano-fabrication method with a great potential for commercial use. This study mainly reviews the E-Jet deposition/printing fundamentals, fabrication process, and applications.

Energy development and environment: What about solar energy in a long term perspective?

NASA Astrophysics Data System (ADS)

Dessus, Benjamin; Pharabod, Francois

After decades of strong growth, the next century might be that in which the world population is stabilized around 11 billion inhabitants. Next century's main concerns include the development hoped for the probable consequences of an increase of the greenhouse effect due to main induced emissions, and the risks posed by possible dissemination of nuclear energy to all the regions of the globe. In order to shed some light on these questions, we propose an energy scenario, based on an analysis of evolution of demographics, energy needs, renewable and fossil reserves, environmental issues, technological possibilities and regional imbalances. This scenario shows that solar energy could contribute significantly in the long term energy mix. We discuss the respective advantages and drawbacks of the different solar technologies: solar power satellites, ground solar power plants and decentralized applications, as they to the needs that must be satisfied.

Health Information System in a Cloud Computing Context.

PubMed

Sadoughi, Farahnaz; Erfannia, Leila

2017-01-01

Healthcare as a worldwide industry is experiencing a period of growth based on health information technology. The capabilities of cloud systems make it as an option to develop eHealth goals. The main objectives of the present study was to evaluate the advantages and limitations of health information systems implementation in a cloud-computing context that was conducted as a systematic review in 2016. Science direct, Scopus, Web of science, IEEE, PubMed and Google scholar were searched according study criteria. Among 308 articles initially found, 21 articles were entered in the final analysis. All the studies had considered cloud computing as a positive tool to help advance health technology, but none had insisted too much on its limitations and threats. Electronic health record systems have been mostly studied in the fields of implementation, designing, and presentation of models and prototypes. According to this research, the main advantages of cloud-based health information systems could be categorized into the following groups: economic benefits and advantages of information management. The main limitations of the implementation of cloud-based health information systems could be categorized into the 4 groups of security, legal, technical, and human restrictions. Compared to earlier studies, the present research had the advantage of dealing with the issue of health information systems in a cloud platform. The high frequency of studies conducted on the implementation of cloud-based health information systems revealed health industry interest in the application of this technology. Security was a subject discussed in most studies due to health information sensitivity. In this investigation, some mechanisms and solutions were discussed concerning the mentioned systems, which would provide a suitable area for future scientific research on this issue. The limitations and solutions discussed in this systematic study would help healthcare managers and decision-makers take better and more efficient advantages of this technology and make better planning to adopt cloud-based health information systems.

A review of ocean chlorophyll algorithms and primary production models

NASA Astrophysics Data System (ADS)

Li, Jingwen; Zhou, Song; Lv, Nan

2015-12-01

This paper mainly introduces the five ocean chlorophyll concentration inversion algorithm and 3 main models for computing ocean primary production based on ocean chlorophyll concentration. Through the comparison of five ocean chlorophyll inversion algorithm, sums up the advantages and disadvantages of these algorithm,and briefly analyzes the trend of ocean primary production model.

AV-95 Sun Devil: High-Speed Military Rotorcraft

NASA Technical Reports Server (NTRS)

1996-01-01

The AV-95 Sun Devil must combine helicopter capabilities, such as vertical takeoff and landings (VTOL) and rotor-powered flight, along with long-duration cruise and high-speed dash capabilities unobtainable by conventional helicopters. To be able to perform both tasks, and perform them well, the AV-95 Sun Devil design incorporates several unconventional devices; the AV-95 uses two convertible turbofan engines, able to provide both shaft power for the main rotor and tall fan as well as jet thrust either separately or simultaneously. Other devices used for the AV-95 include a variable diameter main rotor and a blown flap. In helicopter mode, the AV-95 Sun Devil performs like a winged helicopter. The addition of wings to an attack helicopter results in two significant advantages. First, the addition of wings makes a helicopter more maneuverable than a wingless, but otherwise similar helicopter. Second, since the wings produce lift, rotor stall and compressibility effects can be significantly delayed at high tip velocities. In fixed-wing mode, the main rotor is completely off-loaded but slightly powered, and the rotor diameter has been minimized. The AV-95 Sun Devil has many advantages over other VTOL aircraft. The conversion process is simple and fast; conversion does not make the AV-95 vulnerable to enemy attack during conversion such as a tilt-wing or a tilt-rotor. Stop-rotor aircraft and a stowed rotor aircraft require heavy breaking of the rotor for conversion; this adds time for conversion and weight to the aircraft. Because the AV-95 never stops the rotor in flight, much weight is spared, and conversion is much simpler and faster.

The Evolution of Utilizing Manual Throttles to Avoid Low LH2 NPSP at the SSME Inlet

NASA Technical Reports Server (NTRS)

Henfling, Rick

2011-01-01

Even before the first flight of the Space Shuttle, it was understood low liquid hydrogen (LH2) Net Positive Suction Pressure (NPSP) at the inlet to the Space Shuttle Main Engine (SSME) can have adverse effects on engine operation. A number of failures within both the External Tank (ET) and the Orbiter Main Propulsion System could result in a low LH2 NPSP condition. Operational workarounds were developed to take advantage of the onboard crew s ability to manually throttle down the SSMEs, which alleviated the low LH2 NPSP condition. A throttling down of the SSME resulted in an increase in NPSP, mainly due to the reduction in frictional flow losses while at a lower throttle setting. As engineers refined their understanding of the NPSP requirements for the SSME (through a robust testing program), the operational techniques evolved to take advantage of these additional capabilities. Currently the procedure, which for early Space Shuttle missions required a Return-to-Launch-Site abort, now would result in a nominal Main Engine Cut Off (MECO) and no loss of mission objectives.

Defining International Contracting Terms

DTIC Science & Technology

1994-09-01

compensation so that another nation or company can make a sale or export. The Coca - Cola company refused to accept offsets to break into the lucrative Soviet...Union Market. Their main competitor, Pepsi- Cola , broke into this market 15 years earlier by accepting Stolichnaya vodka as a reciprocal purchase, a... advantages over the other available alternatives (personal interviews or a telephone A-2 survey). While personal interviews offer the advantages of a high

Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing

NASA Astrophysics Data System (ADS)

Zielinski, Jonas; Mindt, Hans-Wilfried; Düchting, Jan; Schleifenbaum, Johannes Henrich; Megahed, Mustafa

2017-12-01

Powder bed fusion additive manufacturing of titanium alloys is an interesting manufacturing route for many applications requiring high material strength combined with geometric complexity. Managing powder bed fusion challenges, including porosity, surface finish, distortions and residual stresses of as-built material, is the key to bringing the advantages of this process to production main stream. This paper discusses the application of experimental and numerical analysis towards optimizing the manufacturing process of a demonstration component. Powder characterization including assessment of the reusability, assessment of material consolidation and process window optimization is pursued prior to applying the identified optima to study the distortion and residual stresses of the demonstrator. Comparisons of numerical predictions with measurements show good correlations along the complete numerical chain.

Measuring Children’s Media Use in the Digital Age

PubMed Central

Vandewater, Elizabeth A.; Lee, Sook-Jung

2009-01-01

In this new and rapidly changing era of digital technology, there is increasing consensus among media scholars that there is an urgent need to develop measurement approaches which more adequately capture media use The overarching goal of this paper is facilitate the development of measurement approaches appropriate for capturing children’s media use in the digital age. The paper outlines various approaches to measurement, focusing mainly on those which have figured prominently in major existing studies of children’s media use. We identify issues related to each technique, including advantages and disadvantages. We also include a review of existing empirical comparisons of various methodologies. The paper is intended to foster discussion of the best ways to further research and knowledge regarding the impact of media on children. PMID:19763246

76 FR 14691 - Delphi Steering, Including On-Site Leased Workers From Acro Service Corporation, Aerotek, Inc...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... Health Care and Advantage Technical Resourcing, Saginaw, MI; Amended Certification Regarding Eligibility... on-site leased workers from Advantage Technical Resourcing were employed on-site at the Saginaw... Department is amending this certification to include workers leased from Advantage Technical Resourcing...

Response format, magnitude of laterality effects, and sex differences in laterality.

PubMed

Voyer, Daniel; Doyle, Randi A

2012-01-01

The present study examined the evidence for the claim that response format might affect the magnitude of laterality effects by means of a meta-analysis. The analysis included the 396 effect sizes drawn from 266 studies retrieved by Voyer (1996) and relevant to the main effect of laterality and sex differences in laterality for verbal and non-verbal tasks in the auditory, tactile, and visual sensory modality. The response format used in specific studies was the only moderator variable of interest in the present analysis, resulting in four broad response categories (oral, written, computer, and pointing). A meta-analysis analogue to ANOVA showed no significant influence of response format on either the main effect of laterality or sex differences in laterality when all sensory modalities were combined. However, when modalities were considered separately, response format affected the main effect of laterality in the visual modality, with a clear advantage for written responses. Further pointed analyses revealed some specific differences among response formats. Results are discussed in terms of their implications for the measurement of laterality.

Report of the New Rings Study Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, S.D.; Dugan, G.; Marriner, J.

1987-10-19

We have taken the approach here of trying to understand both the feasibility and practicality of varied options for new rings at Fermilab, rather than trying to produce a single detailed design. In other words, this document is not a design report and should not be construed as such. Our perception of the potential needs for new rings (in order of priority) is as follows: Antiproton Storage and/or Recovery: A facility for storing up to 4 x 10/sup 12/ antiprotons is needed. Recovery of antiprotons from the collider becomes a viable option if the luminosity is indeed dominated by emittancemore » dilution rather than beam loss. New or Post-Booster: The goal here would be to inject into the existing Main Ring above transition. Improved performance of the Main Ring would be anticipated. New Main Ring: Advantages would include better emittance preservation, a faster cycle time for antiproton production, and the removal of interference/backgrounds at the B0 and D0 detectors. We discuss in this paper various scenarios based on one or more combinations of the above possibilities. 14 figs., 10 tabs.« less

Nano Traditional Chinese Medicine: Current Progresses and Future Challenges.

PubMed

Huang, Yi; Zhao, Yinglan; Liu, Fang; Liu, Songqing

2015-01-01

Nano traditional Chinese medicine (nano TCM) refers to bioactive ingredients, bioactive parts, medicinal materials or complex prescription, being approximately 100 nm in size, which are processed by nanotechnology. Nano TCM is a product of the TCM modernization, and is an application of nanotechnology in the field of TCM. This article reviews literatures on researches of nano TCM, which were published in the past 15 years. Different nanotechnologies have been used in preparation of Nano TCM in view of the varying aims of the study. The mechanical crushing technology is the main approach for nanolization of TCM material and complex prescription, and nanoparticulate drug delivery systems is the main approach for nanolization of bioactive ingredients or bioactive parts in TCM. Nano TCM has a number of advantages, for example, enhancing the bioavailability of TCM, reducing the adverse effects of TCM, achieving sustained release, attaining targeted delivery, enhancing pharmacological effects and improving the administration route of TCM. However, there are still many problems that must be resolved in nano TCM research. The main challenges to nano TCM include the theory system of TCM modernization, preparation technology, safety and stability, etc.

Culture, cultural factors and psychiatric diagnosis: review and projections.

PubMed

Alarcón, Renato D

2009-10-01

This paper aims to provide conceptual justifications for the inclusion of culture and cultural factors in psychiatric diagnosis, and logistic suggestions as to the content and use of this approach. A discussion of the scope and limitations of current diagnostic practice, criticisms from different quarters, and the role and relevance of culture in the diagnostic encounter, precede the examination of advantages and disadvantages of the approach. The cultural content of psychiatric diagnosis should include the main, well-recognized cultural variables, adequate family data, explanatory models, and strengths and weaknesses of every individual patient. The practical aspects include the acceptance of "cultural discordances" as a component of an updated definition of mental disorder, and the use of a refurbished cultural formulation. Clinical "telescoping" strategies to obtain relevant cultural data during the diagnostic interview, and areas of future research (including field trials on the cultural formulation and on "culture bound syndromes"), are outlined.

Manufacture of Sparse-Spectrum Optical Microresonators

NASA Technical Reports Server (NTRS)

Savchenkov, Anatoliy; Iltchenko, Vladimir; Maleki, Lute; Kossakovski, Dimitri

2006-01-01

An alternative design for dielectric optical microresonators and a relatively simple process to fabricate them have been proposed. The proposed microresonators would exploit the same basic physical phenomena as those of microtorus optical resonators and of the microsphere optical resonators described elsewhere. The resonances in such devices are associated with the propagation of electromagnetic waves along circumferential paths in "whispering-gallery" modes. The main advantage afforded by the proposal is that the design and the fabrication process are expected to be amenable to production of multiple microresonators having reproducible spectral parameters -- including, most notably, high values of the resonance quality factor (Q) and reproducible resonance frequencies.

Stationary microfluidics: molecular diagnostic assays by moving magnetic beads through non-moving liquids

NASA Astrophysics Data System (ADS)

Becker, Holger; Carstens, Cornelia; Kuhlmeier, Dirk; Sandetskaya, Natalia; Schröter, Nicole; Zilch, Christian; Gärtner, Claudia

2013-03-01

Commonly, microfluidic devices are based on the movement of fluids. For molecular diagnostics assays which often include steps like PCR, this practically always involves a more or less complicated set of external pumps, valves and liquid controls. In the presented paper, we follow a different approach in which the fluid after sample introduction remains stationary and the main bioactive sample molecules are moved through a chain of reaction compartments which contain the different reagents necessary for the assay. The big advantage of this concept is the lack of any external fluid actuation/control. Results on sample carry-over experiments and complete assays will be given.

Techniques of laparoscopic cholecystectomy: Nomenclature and selection.

PubMed

Haribhakti, Sanjiv P; Mistry, Jitendra H

2015-01-01

There are more than 50 different techniques of laparoscopic cholecystectomy (LC) available in literature mainly due to modifications by surgeons in aim to improve postoperative outcome and cosmesis. These modifications include reduction in port size and/or number than what is used in standard LC. There is no uniform nomenclature to describe these different techniques so that it is not possible to compare the outcomes of different techniques. We brief the advantages and disadvantages of each of these techniques and suggest the situation where particular technique would be useful. We also propose a nomenclature which is easy to remember and apply, so that any future comparison will be possible between the techniques.

Online data collection from video game players: methodological issues.

PubMed

Wood, Richard T A; Griffiths, Mark D; Eatough, Virginia

2004-10-01

The paper outlines the advantages and disadvantages of using the Internet to collect data concerning both online and offline gamers. Drawing from experience of a number of studies carried out online by the authors and by reviewing the available literature, the authors discuss the main issues concerning data collected from video game players. The paper examines a number of areas, including recruiting and utilizing participants, validity, suitable methods of data collection (i.e., questionnaire studies, online tests, participant observation, online interviews), and ethical issues. It is concluded that online research methods can be a useful way of examining the psychosocial aspects of video game playing.

Whole cell entrapment techniques.

PubMed

Trelles, Jorge A; Rivero, Cintia W

2013-01-01

Microbial whole cells are efficient, ecological, and low-cost catalysts that have been successfully applied in the pharmaceutical, environmental, and alimentary industries, among others. Microorganism immobilization is a good way to carry out the bioprocess under preparative conditions. The main advantages of this methodology lie in their high operational stability, easy upstream separation and bioprocess scale-up feasibility. Cell entrapment is the most widely used technique for whole cell immobilization. This technique-in which the cells are included within a rigid network-is porous enough to allow the diffusion of substrates and products, protects the selected microorganism from the reaction medium, and has high immobilization efficiency (100 % in most cases).

A new inverter topology using GTO commutation. [Gate Turn Off thyristor

NASA Technical Reports Server (NTRS)

Rippel, W. E.

1983-01-01

A new N-phase, forced commutated bridge inverter topology has been developed wherein a single Gate Turn Off Thyristor (GTO) is used to commutate each of 2N main Thyristors (SCRs). Since, for most applications, the primary loss mechanism is the SCR forward drop, very high efficiencies are possible. Compared with conventional pure SCR and pure GTO inverters, cost per kW is lower - in the former case due to the large cost differential between GTOs and SCRs. Other advantages of the new inverter include high power density, low switching losses and stresses, modulation flexibility and amenability to high voltage and high frequency operation.

Communication Based on Receptive Multilingualism: Advantages and Disadvantages

ERIC Educational Resources Information Center

Braunmüller, Kurt

2013-01-01

This paper tries to give answers for successful receptive multilingualism (RM) but also for its failure. It is mainly based on the results of two projects, one on inter-dialectal communication in the Baltic area during the era of the Hanseatic League and the other analyses inter-Scandinavian communication today. The main purpose of this survey is…

Chief Characteristics and Advantages of Tailless Airplanes

NASA Technical Reports Server (NTRS)

Dufaure De Lajarte, A

1936-01-01

This study will be concerned with the critical examination of two main questions, mainly, susceptibility of centering and more generally, the conditions of static stability, longitudinal equilibrium, and the question of dynamic stability, or at least the damping of longitudinal vibrations about a position of equilibrium that may result from a small variation in the angle of attack.

Numerical Asymptotic Solutions Of Differential Equations

NASA Technical Reports Server (NTRS)

Thurston, Gaylen A.

1992-01-01

Numerical algorithms derived and compared with classical analytical methods. In method, expansions replaced with integrals evaluated numerically. Resulting numerical solutions retain linear independence, main advantage of asymptotic solutions.

NE Won't Return to Pre-Recession Employment until 2015, but Region's "Education" Advantage Could Offer "Economic" Advantage

ERIC Educational Resources Information Center

Gittell, Ross

2012-01-01

The New England states continue to experience slow growth and slow recovery of the jobs lost in the 2008 to 2009 recession. The main reason for this is the continued weakness in global and U.S. economic conditions. The U.S. and New England economies continue to be affected by the weak European economy and sovereign debt crisis and by weakness in…

SGLT2 inhibitors in the management of type 2 diabetes.

PubMed

Monica Reddy, R P; Inzucchi, Silvio E

2016-08-01

The glucose-lowering pharmacopeia continues to grow for patients with type 2 diabetes. The latest drug category, the SGLT2 inhibitors reduce glycated hemoglobin concentrations by increasing urinary excretion of glucose. They are used mainly in combination with metformin and other antihyperglycemic agents, including insulin. Their glucose-lowering potency is modest. Advantages include lack of hypoglycemia as a side effect, and mild reduction in blood pressure and body weight. Side effects include increased urinary frequency, owing to their mild diuretic action, symptoms of hypovolemia, genitourinary infections. There are also recent reports of rare cases of diabetic ketoacidosis occurring in insulin-treated patients. Recently, a large cardiovascular outcome trial reported that a specific SGLT2 inhibitor, empagliflozin, led to a reduction in the primary endpoint of major cardiovascular events. This effect was mainly the result of a surprising 38 % reduction in cardiovascular death, and the drug was also associated with nearly as large a reduction in heart failure hospitalization. These findings were notable because most drugs used in type 2 diabetes have not been shown to improve cardiovascular outcomes. Accordingly, there is growing interest in empagliflozin and the entire SGLT2 inhibitor class as drugs that could potentially change the manner in which we approach the management of hyperglycemia in patients with type 2 diabetes.

Rare diseases in clinical endocrinology: a taxonomic classification system.

PubMed

Marcucci, G; Cianferotti, L; Beck-Peccoz, P; Capezzone, M; Cetani, F; Colao, A; Davì, M V; degli Uberti, E; Del Prato, S; Elisei, R; Faggiano, A; Ferone, D; Foresta, C; Fugazzola, L; Ghigo, E; Giacchetti, G; Giorgino, F; Lenzi, A; Malandrino, P; Mannelli, M; Marcocci, C; Masi, L; Pacini, F; Opocher, G; Radicioni, A; Tonacchera, M; Vigneri, R; Zatelli, M C; Brandi, M L

2015-02-01

Rare endocrine-metabolic diseases (REMD) represent an important area in the field of medicine and pharmacology. The rare diseases of interest to endocrinologists involve all fields of endocrinology, including rare diseases of the pituitary, thyroid and adrenal glands, paraganglia, ovary and testis, disorders of bone and mineral metabolism, energy and lipid metabolism, water metabolism, and syndromes with possible involvement of multiple endocrine glands, and neuroendocrine tumors. Taking advantage of the constitution of a study group on REMD within the Italian Society of Endocrinology, consisting of basic and clinical scientists, a document on the taxonomy of REMD has been produced. This document has been designed to include mainly REMD manifesting or persisting into adulthood. The taxonomy of REMD of the adult comprises a total of 166 main disorders, 338 including all variants and subtypes, described into 11 tables. This report provides a complete taxonomy to classify REMD of the adult. In the future, the creation of registries of rare endocrine diseases to collect data on cohorts of patients and the development of common and standardized diagnostic and therapeutic pathways for each rare endocrine disease is advisable. This will help planning and performing intervention studies in larger groups of patients to prove the efficacy, effectiveness, and safety of a specific treatment.

Using hypermedia to develop an intelligent tutorial/diagnostic system for the Space Shuttle Main Engine Controller Lab

NASA Technical Reports Server (NTRS)

Oreilly, Daniel; Williams, Robert; Yarborough, Kevin

1988-01-01

This is a tutorial/diagnostic system for training personnel in the use of the Space Shuttle Main Engine Controller (SSMEC) Simulation Lab. It also provides a diagnostic capable of isolating lab failures at least to the major lab component. The system was implemented using Hypercard, which is an program of hypermedia running on Apple Macintosh computers. Hypercard proved to be a viable platform for the development and use of sophisticated tutorial systems and moderately capable diagnostic systems. This tutorial/diagnostic system uses the basic Hypercard tools to provide the tutorial. The diagnostic part of the system uses a simple interpreter written in the Hypercard language (Hypertalk) to implement the backward chaining rule based logic commonly found in diagnostic systems using Prolog. Some of the advantages of Hypercard in developing this type of system include sophisticated graphics, animation, sound and voice capabilities, its ability as a hypermedia tool, and its ability to include digitized pictures. The major disadvantage is the slow execution time for evaluation of rules (due to the interpretive processing of the language). Other disadvantages include the limitation on the size of the cards, that color is not supported, that it does not support grey scale graphics, and its lack of selectable fonts for text fields.

Applications of open-path Fourier transform infrared for identification of volatile organic compound pollution sources and characterization of source emission behaviors.

PubMed

Lin, Chitsan; Liou, Naiwei; Sun, Endy

2008-06-01

An open-path Fourier transform infrared spectroscopy (OP-FTIR) system was set up for 3-day continuous line-averaged volatile organic compound (VOC) monitoring in a paint manufacturing plant. Seven VOCs (toluene, m-xylene, p-xylene, styrene, methanol, acetone, and 2-butanone) were identified in the ambient environment. Daytime-only batch operation mode was well explained by the time-series concentration plots. Major sources of methanol, m-xylene, acetone, and 2-butanone were identified in the southeast direction where paint solvent manufacturing processes are located. However, an attempt to uncover sources of styrene was not successful because the method detection limit (MDL) of the OP-FTIR system was not sensitive enough to produce conclusive data. In the second scenario, the OP-FTIR system was set up in an industrial complex to distinguish the origins of several VOCs. Eight major VOCs were identified in the ambient environment. The pollutant detected wind-rose percentage plots that clearly showed that ethylene, propylene, 2-butanone, and toluene mainly originated from the tank storage area, whereas the source of n-butane was mainly from the butadiene manufacturing processes of the refinery plant, and ammonia was identified as an accompanying reduction product in the gasoline desulfuration process. Advantages of OP-FTIR include its ability to simultaneously and continuously analyze many compounds, and its long path length monitoring has also shown advantages in obtaining more comprehensive data than the traditional multiple, single-point monitoring methods.

QWIP development status at Thales Research and Technology

NASA Astrophysics Data System (ADS)

Costard, Eric; Nedelcu, Alexandru; Marcadet, Xavier; Belhaire, Eric; Bois, Philippe

2006-05-01

Standard GaAs/AlGaAs Quantum Well Infrared Photodetectors (QWIP) are now seriously considered as a technological choice for the 3 rd generation of thermal imagers. Since 2001, the THALES Group has been manufacturing sensitive arrays using QWIP technology based on AsGa techniques through THALES Research and Technology Laboratory. This QWIP technology allows the realisation of large staring arrays for Thermal Imagers (TI) working in the Infrared region of the spectrum. A review of the current QWIP products is presented (LWIR, MWIR and dual color FPAs). The main advantage of this GaAs detector technology is that it is also used for other commercial devices. The duality of this QWIP technology has lead to important improvements over the last ten years and it reaches now an undeniable level of maturity. As a result, the processing of large substrate and a good characteristic uniformity, which are the key parameters for reaching high production yield, are already achieved. Concerning the defective pixels, the main common features are a high operability (above 99.9%) and a low number of clusters including a maximum of 5 dead pixels. Another advantage of this III-V technology is the versatility of the design and processing phases. It allows customizing both the quantum structure and the pixel architecture in order to fulfill the requirements of any specific applications. The spectral response of QWIPs is intrinsically resonant but the quantum structure can be designed for a given detection wavelength window ranging from MWIR, LWIR to VLWIR.

Emotional Picture and Word Processing: An fMRI Study on Effects of Stimulus Complexity

PubMed Central

Schlochtermeier, Lorna H.; Kuchinke, Lars; Pehrs, Corinna; Urton, Karolina; Kappelhoff, Hermann; Jacobs, Arthur M.

2013-01-01

Neuroscientific investigations regarding aspects of emotional experiences usually focus on one stimulus modality (e.g., pictorial or verbal). Similarities and differences in the processing between the different modalities have rarely been studied directly. The comparison of verbal and pictorial emotional stimuli often reveals a processing advantage of emotional pictures in terms of larger or more pronounced emotion effects evoked by pictorial stimuli. In this study, we examined whether this picture advantage refers to general processing differences or whether it might partly be attributed to differences in visual complexity between pictures and words. We first developed a new stimulus database comprising valence and arousal ratings for more than 200 concrete objects representable in different modalities including different levels of complexity: words, phrases, pictograms, and photographs. Using fMRI we then studied the neural correlates of the processing of these emotional stimuli in a valence judgment task, in which the stimulus material was controlled for differences in emotional arousal. No superiority for the pictorial stimuli was found in terms of emotional information processing with differences between modalities being revealed mainly in perceptual processing regions. While visual complexity might partly account for previously found differences in emotional stimulus processing, the main existing processing differences are probably due to enhanced processing in modality specific perceptual regions. We would suggest that both pictures and words elicit emotional responses with no general superiority for either stimulus modality, while emotional responses to pictures are modulated by perceptual stimulus features, such as picture complexity. PMID:23409009

Relationship Between Neighborhood Disadvantage and Social Function of Wisconsin 2- and 3-Year-Olds Born at Very Low Birth Weight

PubMed Central

McManus, Beth Marie; Robert, Stephanie A.; Albanese, Aggie; Sadek-Badawi, Mona; Palta, Mari

2013-01-01

Objective To examine whether (1) neighborhood disadvantage is associated with social function in 2- and 3-year-olds born at very low birth weight (<1500 g) and (2) the association between social function and child’s health-related quality of life (HRQoL) is moderated by neighborhood disadvantage. Design Cross-sectional study using the Newborn Lung Project, a cohort of infants born at very low birth weight in 2003 and 2004 in Wisconsin. Setting Wisconsin. Participants This study includes the subgroup of 626 non-Hispanic black or white infants who were followed up at ages 24 to 43 months with parent-reported health and developmental information. Main Exposure An index of neighborhood disadvantage was derived by principal component analysis of 5 census tract variables (percentage of families in poverty, percentage of households with income higher than the state median, percentage of women with bachelor’s degree or more, percentage of single mothers, and percentage of mothers of young children unemployed). Children were then classified (based on index tertiles) as living in either disadvantaged, middle advantage, or advantaged neighborhoods. Children’s HRQoL was measured using the Pediatric Quality of Life Inventory. Main Outcome Measure Social function was measured using the Pediatric Evaluation of Disability Inventory. Results Adjusting for child medical and family socioeconomic attributes, social function was lower (mean difference, −4.60; 95% confidence interval, −8.4 to −0.8) for children living in disadvantaged vs advantaged neighborhoods. We also found that the ill effects of lower HRQoL are particularly bad for children living in a disadvantaged neighborhood. Conclusion Children born at very low birth weight have disparities in social function at ages 2 and 3 years that are associated with both HRQoL and neighborhood characteristics. PMID:20921342

Preclinical Animal Models for Temporomandibular Joint Tissue Engineering.

PubMed

Almarza, Alejandro J; Brown, Bryan N; Arzi, Boaz; Ângelo, David Faustino; Chung, William; Badylak, Stephen F; Detamore, Michael

2018-06-01

There is a paucity of in vivo studies that investigate the safety and efficacy of temporomandibular joint (TMJ) tissue regeneration approaches, in part due to the lack of established animal models. Review of disease models for study of TMJ is presented herein with an attempt to identify relevant preclinical animal models for TMJ tissue engineering, with emphasis on the disc and condyle. Although degenerative joint disease models have been mainly performed on mice, rats, and rabbits, preclinical regeneration approaches must employ larger animal species. There remains controversy regarding the preferred choice of larger animal models between the farm pig, minipig, goat, sheep, and dog. The advantages of the pig and minipig include their well characterized anatomy, physiology, and tissue properties. The advantages of the sheep and goat are their easier surgical access, low cost per animal, and its high tissue availability. The advantage of the dog is that the joint space is confined, so migration of interpositional devices should be less likely. However, each species has limitations as well. For example, the farm pig has continuous growth until about 18 months of age, and difficult surgical access due to the zygomatic arch covering the lateral aspect of joint. The minipig is not widely available and somewhat costly. The sheep and the goat are herbivores, and their TMJs mainly function in translation. The dog is a carnivore, and the TMJ is a hinge joint that can only rotate. Although no species provides the gold standard for all preclinical TMJ tissue engineering approaches, the goat and sheep have emerged as the leading options, with the minipig as the choice when cost is less of a limitation; and with the dog and farm pig serving as acceptable alternatives. Finally, naturally occurring TMJ disorders in domestic species may be harnessed on a preclinical trial basis as a clinically relevant platform for translation.

The PIAA Coronagraph Prototype: First Laboratory Results.

NASA Astrophysics Data System (ADS)

Pluzhnik, Eugene; Guyon, O.; Colley, S.; Gallet, B.; Ridgway, S.; Woodruff, R.; Tanaka, S.; Warren, M.

2006-12-01

The phase-induced amplitude apodization (PIAA) coronagraph combines the main advantages of classical pupil apodization with high throughput ( 100%), high angular resolution ( 2λ/D) and low chromaticity. These advantages can allow direct imaging of nearby extrasolar planets with a 4-meter telescope. The PIAA coronagraph laboratory prototype has been successfully manufactured and starts to operate at the Subary Telescope facility. We present here our first laboratory results with this prototype where we have achieved 2x10-6 contrast within 2 λ/D. We also discuss the main constrains limiting the contrast and describe our future efforts. This work was carried out under JPL contract numbers 1254445 and 1257767 for Development of Technologies for the Terrestrial Planet Finder Mission, with the support and hospitality of the National Astronomical Observatory of Japan.

Physics Education Research at the Upper Division at the University of Maine

NASA Astrophysics Data System (ADS)

Thompson, John

2013-04-01

Researchers from the University of Maine Physics Education Research Laboratory are conducting several investigations of the learning and teaching of physics beyond the introductory level. Content topics include intermediate mechanics, electronics, thermodynamics and statistical mechanics. One focus of our work is the identification and addressing of specific student difficulties with topics such as damped harmonic motion, bipolar junction transistor (BJT) circuits, work, entropy, and the Boltzmann factor. Student understanding and use of the underlying mathematics has been one important emerging theme, including definite integrals, partial derivatives, and linear differential equations. Recent work in mechanics has focused on understanding the interplay of mathematical and physical reasoning when describing damped harmonic motion, including framing and representational issues. In electronics, there has been an ongoing investigation of student understanding of the behavior of basic BJT follower and amplifier circuits as well as related issues of signal and bias. In thermal physics, student understanding of state functions, heat engines and the Carnot cycle, the First and Second Laws of thermodynamics, and the macroscopic and microscopic perspectives on entropy have been investigated. The greater content sophistication in these courses has drawn attention to the specific needs, constraints, and advantages of instructional materials tailored to the upper division. Future directions include more attention to interdisciplinary topics across mathematics, physics, and engineering in particular, as well as metacognition in the laboratory.

Competitive Advantage and its Sources in an Evolving Market

NASA Astrophysics Data System (ADS)

Zaridis, Apostolos D.

2009-08-01

In a continuously altered and evolving Market, as is the food manufacturing market, the main and long-lasting objective of firm that is the maximization of its wealth and consequently the continuous remaining in profit regions, appears that it is possible to be achieved via the obtainment and maintenance of diachronically long-term competitive advantage, which it will render the firm unique or leader force in a inexorable competition that is continuously extended in a globalized market. Various definitions and different regards are developed in regard to the competitive advantage and the way with which a firm it is possible, acquiring it, to star in the market in which it is activated. As result of sustainable competitive advantage in a firm comes the above the average performance. Abundance of resources and competences that are proposed as sources of competitive advantage in the resource-based view literature exists, while they are added continuously new based on empiric studies. In any case, it appears to suffer hierarchy of sources of competitive advantage, with regard to sustainability of these.

Negative pressure wound therapy in pediatric surgery: How and when to use.

PubMed

de Jesus, Lisieux Eyer; Martins, Alana Bandeira; Oliveira, Pablo Baptista; Gomes, Fernanda; Leve, Thais; Dekermacher, Samuel

2018-04-01

Negative pressure wound therapy (NPWT) has been widely adopted to treat laparostomy, abdominal compartment syndrome (ACS) and complicated wounds associated with tissue loss. The method presents specific aspects, advantages and indications in Pediatrics. Our aim is to review the evidence available about NPWT in children. Active search for papers about NPWT in Pediatric patients. Papers referring to orthopedic problems, wound complications after Cardiac Surgery or burns were excluded. The method shows good results to treat ACS, complicated wounds and abdominal wall malformations in neonates, including prematures. Periwound skin protection, monitoring of fluid losses and fine tuning of negative pressure levels according to age are necessary. Less pain, quicker recovery, less frequent dressing changes, possible recovery of exposed surgical hardware, granulation and shrinkage of the wound are advantages of the method over other kinds of dressing. NPWT is contraindicated over blood vessels and exposed nerves. Debridement is needed before usage over necrotic areas. Enteric fistulae are not contraindications. Complications are rare, mainly foam retention and dermatitis/skin maceration. The possibility of fistulae being caused by NPWT remains debatable. NPWT is widely used in Pediatrics, including neonates and premature, but the evidence available about the method is scarce and low quality. Complications are uncommon and mostly manageable. A possible causal relationship between NPWY and enteric fistula remains unclear. Adult devices and parameters have been adapted to children's use. Extra care is needed to protect the delicate tissues of Pediatric patients. Comparative research to define differential costs, indications and advantages of the method, specific indications and limits of NWTP in Pediatrics is needed. Review. IV. Copyright © 2017 Elsevier Inc. All rights reserved.

Enterohaemorrhagic Escherichia coli gains a competitive advantage by using ethanolamine as a nitrogen source in the bovine intestinal content.

PubMed

Bertin, Yolande; Girardeau, J P; Chaucheyras-Durand, F; Lyan, Bernard; Pujos-Guillot, Estelle; Harel, Josée; Martin, Christine

2011-02-01

The bovine gastrointestinal tract is the main reservoir for enterohaemorrhagic Escherichia coli (EHEC) responsible for food-borne infections. Characterization of nutrients that promote the carriage of these pathogens by the ruminant would help to develop ecological strategies to reduce their survival in the bovine gastrointestinal tract. In this study, we show for the first time that free ethanolamine (EA) constitutes a nitrogen source for the O157:H7 EHEC strain EDL933 in the bovine intestinal content because of induction of the eut (ethanolamine utilization) gene cluster. In contrast, the eut gene cluster is absent in the genome of most species constituting the mammalian gut microbiota. Furthermore, the eutB gene (encoding a subunit of the enzyme that catalyses the release of ammonia from EA) is poorly expressed in non-pathogenic E. coli. Accordingly, EA is consumed by EHEC but is poorly metabolized by endogenous microbiota of the bovine small intestine, including commensal E. coli. Interestingly, the capacity to utilize EA as a nitrogen source confers a growth advantage to E. coli O157:H7 when the bacteria enter the stationary growth phase. These data demonstrate that EHEC strains take advantage of a nitrogen source that is not consumed by the resident microbiota, and suggest that EA represents an ecological niche favouring EHEC persistence in the bovine intestine.

Evaluation of semiconductor devices for Electric and Hybrid Vehicle (EHV) ac-drive applications, volume 1

NASA Technical Reports Server (NTRS)

Lee, F. C.; Chen, D. Y.; Jovanovic, M.; Hopkins, D. C.

1985-01-01

The results of evaluation of power semiconductor devices for electric hybrid vehicle ac drive applications are summarized. Three types of power devices are evaluated in the effort: high power bipolar or Darlington transistors, power MOSFETs, and asymmetric silicon control rectifiers (ASCR). The Bipolar transistors, including discrete device and Darlington devices, range from 100 A to 400 A and from 400 V to 900 V. These devices are currently used as key switching elements inverters for ac motor drive applications. Power MOSFETs, on the other hand, are much smaller in current rating. For the 400 V device, the current rating is limited to 25 A. For the main drive of an electric vehicle, device paralleling is normally needed to achieve practical power level. For other electric vehicle (EV) related applications such as battery charger circuit, however, MOSFET is advantageous to other devices because of drive circuit simplicity and high frequency capability. Asymmetrical SCR is basically a SCR device and needs commutation circuit for turn off. However, the device poses several advantages, i.e., low conduction drop and low cost.

On the "Optimal" Choice of Trial Functions for Modelling Potential Fields

NASA Astrophysics Data System (ADS)

Michel, Volker

2015-04-01

There are many trial functions (e.g. on the sphere) available which can be used for the modelling of a potential field. Among them are orthogonal polynomials such as spherical harmonics and radial basis functions such as spline or wavelet basis functions. Their pros and cons have been widely discussed in the last decades. We present an algorithm, the Regularized Functional Matching Pursuit (RFMP), which is able to choose trial functions of different kinds in order to combine them to a stable approximation of a potential field. One main advantage of the RFMP is that the constructed approximation inherits the advantages of the different basis systems. By including spherical harmonics, coarse global structures can be represented in a sparse way. However, the additional use of spline basis functions allows a stable handling of scattered data grids. Furthermore, the inclusion of wavelets and scaling functions yields a multiscale analysis of the potential. In addition, ill-posed inverse problems (like a downward continuation or the inverse gravimetric problem) can be regularized with the algorithm. We show some numerical examples to demonstrate the possibilities which the RFMP provides.

Hydrogel Based Biosensors for In Vitro Diagnostics of Biochemicals, Proteins, and Genes.

PubMed

Jung, Il Young; Kim, Ji Su; Choi, Bo Ram; Lee, Kyuri; Lee, Hyukjin

2017-06-01

Hydrogel-based biosensors have drawn considerable attention due to their various advantages over conventional detection systems. Recent studies have shown that hydrogel biosensors can be excellent alternative systems to detect a wide range of biomolecules, including small biochemicals, pathogenic proteins, and disease specific genes. Due to the excellent physical properties of hydrogels such as the high water content and stimuli-responsive behavior of cross-linked network structures, this system can offer substantial improvement for the design of novel detection systems for various diagnostic applications. The other main advantage of hydrogels is the role of biomimetic three-dimensional (3D) matrix immobilizing enzymes and aptamers within the detection systems, which enhances their stability. This provides ideal reaction conditions for enzymes and aptamers to interact with substrates within the aqueous environment of the hydrogel. In this review, we have highlighted various novel detection approaches utilizing the outstanding properties of the hydrogel. This review summarizes the recent progress of hydrogel-based biosensors and discusses their future perspectives and clinical limitations to overcome. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The transition from microscopic to endoscopic transsphenoidal surgery: the experience at Brigham and Women's Hospital.

PubMed

Laws, Edward R; Barkhoudarian, Garni

2014-12-01

As interest and enthusiasm for the use of the endoscope in transsphenoidal anterior skull base and pituitary surgery increases, neurosurgeons are increasingly adopting endoscopic technology and associated novel concepts. Often this involves a transition from the standard operating microscope as the main means of visualization to the operating endoscope (2D or 3D) during surgery. The authors' experience with this transition is described, including the rationale, advantages and disadvantages of the two surgical techniques. The successful use of endoscopic surgery for a large variety of pathological problems involving the anterior skull base and the pituitary region is presented. Perceived advantages for the patient and the surgeon are described, as is the occasional need for transition back to the microscopic approach. The endoscopic approach and its allied technology are here to stay. They are useful and occasionally preferable methods for treating a variety of suitable lesions involving the anterior skull base. The importance of incorporating the basic principles of skull base surgery is emphasized. Copyright © 2014 Elsevier Inc. All rights reserved.

Quantification of 235U and 238U activity concentrations for undeclared nuclear materials by a digital gamma-gamma coincidence spectroscopy.

PubMed

Zhang, Weihua; Yi, Jing; Mekarski, Pawel; Ungar, Kurt; Hauck, Barry; Kramer, Gary H

2011-06-01

The purpose of this study is to investigate the possibility of verifying depleted uranium (DU), natural uranium (NU), low enriched uranium (LEU) and high enriched uranium (HEU) by a developed digital gamma-gamma coincidence spectroscopy. The spectroscopy consists of two NaI(Tl) scintillators and XIA LLC Digital Gamma Finder (DGF)/Pixie-4 software and card package. The results demonstrate that the spectroscopy provides an effective method of (235)U and (238)U quantification based on the count rate of their gamma-gamma coincidence counting signatures. The main advantages of this approach over the conventional gamma spectrometry include the facts of low background continuum near coincident signatures of (235)U and (238)U, less interference from other radionuclides by the gamma-gamma coincidence counting, and region-of-interest (ROI) imagine analysis for uranium enrichment determination. Compared to conventional gamma spectrometry, the method offers additional advantage of requiring minimal calibrations for (235)U and (238)U quantification at different sample geometries. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

There Is No Coherent Evidence for a Bilingual Advantage in Executive Processing

ERIC Educational Resources Information Center

Paap, Kenneth R.; Greenberg, Zachary I.

2013-01-01

Three studies compared bilinguals to monolinguals on 15 indicators of executive processing (EP). Most of the indicators compare a neutral or congruent baseline to a condition that should require EP. For each of the measures there was no main effect of group and a highly significant main effect of condition. The critical marker for a bilingual…

Novel, Solvent-Free, Single Ion-Conductive Polymer Electrolytes

DTIC Science & Technology

2008-02-01

tetrahedron structure wherein no hydrogen is present. The main advantage of the use of LiBOB salt is the high ionic conductivity at low-ambient...In addition to its plasticizing effect, the LiBOB salt offers other important advantages such as: no risk of production of harmful gases and/or...6 to the (120) reflection. Increase of CP concentration up to 1:0.5 salt -to-additive ratio in the SiO2-containing PE is followed by a

A Performance Comparison of Xenon and Krypton Propellant on an SPT-100 Hall Thruster (Preprint)

DTIC Science & Technology

2011-08-10

plume data from electrostatic probes. This paper presents the results of performance measurements made using an inverted pendulum thrust stand. Krypton...inverted pendulum thrust stand. Krypton operating conditions were tested over a large range of operating powers from 800 W to 3.9 kW. Analysis of how...advantages for missions where high thrust at reduced specific impulse is advantageous, primarily for orbit raising missions. Bismuth’s main drawback is

Experimental study of main rotor tip geometry and tail rotor interactions in hover. Volume 2: Run log and tabulated data

NASA Technical Reports Server (NTRS)

Balch, D. T.; Lombardi, J.

1985-01-01

A model scale hover test was conducted in the Sikorsky Aircraft Model Rotor hover Facility to identify and quantify the impact of the tail rotor on the demonstrated advantages of advanced geometry tip configurations. The existence of mutual interference between hovering main rotor and a tail rotor was acknowledged in the test. The test was conducted using the Basic Model Test Rig and two scaled main rotor systems, one representing a 1/5.727 scale UH-60A BLACK HAWK and the others a 1/4.71 scale S-76. Eight alternate rotor tip configurations were tested, 3 on the BLACK HAWK rotor and 6 on the S-76 rotor. Four of these tips were then selected for testing in close proximity to an operating tail rotor (operating in both tractor and pusher modes) to determine if the performance advantages that could be obtained from the use of advanced geometry tips in a main rotor only environment would still exist in the more complex flow field involving a tail rotor. This volume contains the test run log and tabulated data.

The main challenges that remain in applying high-throughput sequencing to clinical diagnostics.

PubMed

Loeffelholz, Michael; Fofanov, Yuriy

2015-01-01

Over the last 10 years, the quality, price and availability of high-throughput sequencing instruments have improved to the point that this technology may be close to becoming a routine tool in the diagnostic microbiology laboratory. Two groups of challenges, however, have to be resolved in order to move this powerful research technology into routine use in the clinical microbiology laboratory. The computational/bioinformatics challenges include data storage cost and privacy concerns, requiring analysis to be performed without access to cloud storage or expensive computational infrastructure. The logistical challenges include interpretation of complex results and acceptance and understanding of the advantages and limitations of this technology by the medical community. This article focuses on the approaches to address these challenges, such as file formats, algorithms, data collection, reporting and good laboratory practices.

Diagnosis and management of transfusion iron overload: The role of imaging

PubMed Central

Wood, John C.

2010-01-01

The characterization of iron stores is important to prevent and treat iron overload. Serum markers such as ferritin, serum iron, iron binding capacity, transferrin saturation, and nontransferrin-bound iron can be used to follow trends in iron status; however, variability in these markers limits predictive power for any given individual. Liver iron represents the best single marker of total iron balance. Measures of liver iron include biopsy, superconducting quantum interference device, computer tomography, and magnetic resonance imaging (MRI). MRI is the most accurate and widely available noninvasive tool to assess liver iron. The main advantages of MRI include a low-rate of variability between measurements and the ability to assess iron loading in endocrine tissues, the heart and the liver. This manuscript describes the principles, validation, and clinical utility of MRI for tissue iron estimation. PMID:17963249

Tangible interactive system for document browsing and visualisation of multimedia data

NASA Astrophysics Data System (ADS)

Rytsar, Yuriy; Voloshynovskiy, Sviatoslav; Koval, Oleksiy; Deguillaume, Frederic; Topak, Emre; Startchik, Sergei; Pun, Thierry

2006-01-01

In this paper we introduce and develop a framework for document interactive navigation in multimodal databases. First, we analyze the main open issues of existing multimodal interfaces and then discuss two applications that include interaction with documents in several human environments, i.e., the so-called smart rooms. Second, we propose a system set-up dedicated to the efficient navigation in the printed documents. This set-up is based on the fusion of data from several modalities that include images and text. Both modalities can be used as cover data for hidden indexes using data-hiding technologies as well as source data for robust visual hashing. The particularities of the proposed robust visual hashing are described in the paper. Finally, we address two practical applications of smart rooms for tourism and education and demonstrate the advantages of the proposed solution.

In Their Own Words: Interviews with Musicians Reveal the Advantages and Disadvantages of Wearing Earplugs.

PubMed

Beach, Elizabeth F; O'Brien, Ian

2017-06-01

Musicians are at risk of hearing loss from sound exposure, and earplugs form part of many musicians' hearing conservation practices. Although musicians typically report a range of difficulties when wearing earplugs, there are many who have managed to successfully incorporate earplugs into their practice of music. The study aim was to provide a detailed account of earplug usage from the perspective of the musician, including motivating factors, practical strategies, and attitudes. In-depth interviews with 23 musicians were transcribed and content analysis was performed. Responses were coded and classified into three main themes: advantages, disadvantages, and usage patterns and strategies, together with an overlapping fourth theme, youth perspectives. Several positive aspects of wearing earplugs were identified, including long-term hearing protection and reduced levels of fatigue and pain. Musicians reported that earplugs present few problems for communication, improve sound clarity in ensembles, are discreet, and are easy to handle. However, earplugs also present challenges, including an overall dullness of sound, reduced immediacy, and an impaired ability to judge balance and intonation due to the occlusion effect, all of which influence usage habits and patterns. The experiences of the younger musicians and long-term users of earplugs indicate that practice, persistence, and a flexible approach are required for successful earplug usage. In time, there may be greater acceptance of earplugs, particularly amongst a new generation of musicians, some of whom regard the earplugs as a performance enhancement tool as well as a protective device.

Advantage of resonant power conversion in aerospace applications

NASA Technical Reports Server (NTRS)

Hansen, I. G.

1983-01-01

An ultrasonic, sinusoidal aerospace power distribution system is shown to have many advantages over other candidate power systems. These advantages include light weight, ease of fault clearing, versatility in handling many loads including motors, and the capability of production within the limits of present technology. References are cited that demonstrate the state of resonant converter technology and support these conclusions.

Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing.

PubMed

Ji, Lei; Lu, Jiping; Tang, Shuiyuan; Wu, Qianru; Wang, Jiachen; Ma, Shuyuan; Fan, Hongli; Liu, Changmeng

2018-06-28

Wire feeding additive manufacturing (WFAM) has broad application prospects because of its advantages of low cost and high efficiency. However, with the mode of lateral wire feeding, including wire and laser additive manufacturing, gas tungsten arc additive manufacturing etc., it is easy to generate macro defects on the surface of the components because of the anisotropy of melted wire, which limits the promotion and application of WFAM. In this work, gas tungsten arc additive manufacturing with lateral wire feeding is proposed to investigate the mechanisms of macro defects. The results illustrate that the defect forms mainly include side spatters, collapse, poor flatness, and unmelted wire. It was found that the heat input, layer thickness, tool path, and wire curvature can have an impact on the macro defects. Side spatters are the most serious defects, mainly because the droplets cannot be transferred to the center of the molten pool in the lateral wire feeding mode. This research indicates that the macro defects can be controlled by optimizing the process parameters. Finally, block parts without macro defects were fabricated, which is meaningful for the further application of WFAM.

Micromachined Fluid Inertial Sensors

PubMed Central

Liu, Shiqiang; Zhu, Rong

2017-01-01

Micromachined fluid inertial sensors are an important class of inertial sensors, which mainly includes thermal accelerometers and fluid gyroscopes, which have now been developed since the end of the last century for about 20 years. Compared with conventional silicon or quartz inertial sensors, the fluid inertial sensors use a fluid instead of a solid proof mass as the moving and sensitive element, and thus offer advantages of simple structures, low cost, high shock resistance, and large measurement ranges while the sensitivity and bandwidth are not competitive. Many studies and various designs have been reported in the past two decades. This review firstly introduces the working principles of fluid inertial sensors, followed by the relevant research developments. The micromachined thermal accelerometers based on thermal convection have developed maturely and become commercialized. However, the micromachined fluid gyroscopes, which are based on jet flow or thermal flow, are less mature. The key issues and technologies of the thermal accelerometers, mainly including bandwidth, temperature compensation, monolithic integration of tri-axis accelerometers and strategies for high production yields are also summarized and discussed. For the micromachined fluid gyroscopes, improving integration and sensitivity, reducing thermal errors and cross coupling errors are the issues of most concern. PMID:28216569

Review of methods for determination of ammonia volatilization in farmland

NASA Astrophysics Data System (ADS)

Yang, J.; Jiao, Y.; Yang, W. Z.; Gu, P.; Bai, S. G.; Liu, L. J.

2018-02-01

Ammonia is one of the most abundant alkaline trace gases in the atmosphere, which is one of the important factors affecting atmospheric quality. Excessive application of nitrogen fertilizer is the main source of global ammonia emissions, which not only exacerbate greenhouse gas emissions, but also leads to eutrophication of water bodies. In this paper, the basic principle, the operation process, the advantages and disadvantages, and the previous research results of the method are summarized in detail, including the enclosure method, the venting method, the continuous airflow enclosure method, the wind tunnel method and the micro-meteorological method. So as to provide a theoretical basis for selecting the appropriate method for determination of ammonia volatilization.

Radiation Field Forming for Industrial Electron Accelerators Using Rare-Earth Magnetic Materials

NASA Astrophysics Data System (ADS)

Ermakov, A. N.; Khankin, V. V.; Shvedunov, N. V.; Shvedunov, V. I.; Yurov, D. S.

2016-09-01

The article describes the radiation field forming system for industrial electron accelerators, which would have uniform distribution of linear charge density at the surface of an item being irradiated perpendicular to the direction of its motion. Its main element is non-linear quadrupole lens made with the use of rare-earth magnetic materials. The proposed system has a number of advantages over traditional beam scanning systems that use electromagnets, including easier product irradiation planning, lower instantaneous local dose rate, smaller size, lower cost. Provided are the calculation results for a 10 MeV industrial electron accelerator, as well as measurement results for current distribution in the prototype build based on calculations.

Research on dynamic characteristics of motor vibration isolation system through mechanical impedance method

NASA Astrophysics Data System (ADS)

Zhao, Xingqian; Xu, Wei; Shuai, Changgeng; Hu, Zechao

2017-12-01

A mechanical impedance model of a coupled motor-shaft-bearing system has been developed to predict the dynamic characteristics and partially validated by comparing the computing results with finite element method (FEM), including the comparison of displacement amplitude in x and z directions at the two ends of the flexible coupling, the comparison of normalized vertical reaction force in z direction at bearing pedestals. The results demonstrate that the developed model can precisely predict the dynamic characteristics and the main advantage of such a method is that it can clearly illustrate the vibration property of the motor subsystem, which plays an important role in the isolation system design.

Analysis of ERTS-1 imagery of Wyoming and its application to evaluation of Wyoming's natural resources

NASA Technical Reports Server (NTRS)

Houston, R. S. (Principal Investigator); Marrs, R. W.; Borgman, L. E.; Agard, S. S.; Barton, R.; Blackstone, D. L.; Breckenridge, R. M.; Decker, E. R.; Earle, J.; Evans, M. A.

1975-01-01

The author has identified the following significant results. The Earth Resources Technology Satellite data included the following successful applications: (1) general geologic mapping, (2) structural and tectonic studies, (3) landforms and surface processes, (4) mineral exploration, (5) land use inventories, (6) hydrologic studies, (7) investigations in agriculture and forestry, and (8) environmental quality and ecology. The chief advantages of ERTS-1 data for geologic studies are synoptic view, spectral information, and seasonal coverage. The spectral data and repetitive aspect are also important for land use and vegetation studies. Low resolution and lack of steoscopic coverage were found to be the main limitations of ERTS data.

Optical application of electrowetting

NASA Astrophysics Data System (ADS)

He, Mei; Peng, Runling; Chen, Jiabi

2017-02-01

Since electrowetting has been proposed, researchers began to apply eletrowetting into different fields, such as lab-on-chip systems, display technologies, printings and optics etc. This paper mainly introduced structure, theory and application of optical devices based on electrowetting. The optical devices include liquid optical prism, liquid optical lens and display. The paper introduced their principle, specific application and many advantages in optical applications. When they are applied to optical system, production and experiment, they can reduce mechanical moving parts, simplify the structure, operate easily, decrease manufacturing cost and energy consumption, improve working efficiency, and so on. We learn and research them in detail that will contribute to research and develop optical eletrowetting in the future.

Overview on the high power excimer laser technology

NASA Astrophysics Data System (ADS)

Liu, Jingru

2013-05-01

High power excimer laser has essential applications in the fields of high energy density physics, inertial fusion energy and industry owing to its advantages such as short wavelength, high gain, wide bandwidth, energy scalable and repetition operating ability. This overview is aimed at an introduction and evaluation of enormous endeavor of the international high power excimer laser community in the last 30 years. The main technologies of high power excimer laser are reviewed, which include the pumping source technology, angular multiplexing and pulse compressing, beam-smoothing and homogenous irradiation, high efficiency and repetitive operation et al. A high power XeCl laser system developed in NINT of China is described in detail.

Techniques of laparoscopic cholecystectomy: Nomenclature and selection

PubMed Central

Haribhakti, Sanjiv P.; Mistry, Jitendra H.

2015-01-01

There are more than 50 different techniques of laparoscopic cholecystectomy (LC) available in literature mainly due to modifications by surgeons in aim to improve postoperative outcome and cosmesis. These modifications include reduction in port size and/or number than what is used in standard LC. There is no uniform nomenclature to describe these different techniques so that it is not possible to compare the outcomes of different techniques. We brief the advantages and disadvantages of each of these techniques and suggest the situation where particular technique would be useful. We also propose a nomenclature which is easy to remember and apply, so that any future comparison will be possible between the techniques. PMID:25883450

Optical encryption and QR codes: secure and noise-free information retrieval.

PubMed

Barrera, John Fredy; Mira, Alejandro; Torroba, Roberto

2013-03-11

We introduce for the first time the concept of an information "container" before a standard optical encrypting procedure. The "container" selected is a QR code which offers the main advantage of being tolerant to pollutant speckle noise. Besides, the QR code can be read by smartphones, a massively used device. Additionally, QR code includes another secure step to the encrypting benefits the optical methods provide. The QR is generated by means of worldwide free available software. The concept development probes that speckle noise polluting the outcomes of normal optical encrypting procedures can be avoided, then making more attractive the adoption of these techniques. Actual smartphone collected results are shown to validate our proposal.

[Methodological aspects in the evaluation of turn-over and up/down sizing as indicators of work-related stress].

PubMed

Veronesi, G; Bertù, L; Mombelli, S; Cimmino, L; Caravati, G; Conti, M; Abate, T; Ferrario, M M

2011-01-01

We discuss the methodological aspects related to the evaluation of turn-over and up-down sizing as indicators of work-related stress, in complex organizations like a university hospital. To estimate the active workers population we developed an algorithm which integrated several administrative databases. The indicators were standardized to take into account some potential confounders (age, sex, work seniority) when considering different hospital structures and job mansions. Main advantages of our method include flexibility in the choice of the analysis detail (hospital units, job mansions, a combination of both) and the possibility to describe over-time trends to measure the success of preventive strategies.

Heat transfer of phase-change materials in two-dimensional cylindrical coordinates

NASA Technical Reports Server (NTRS)

Labdon, M. B.; Guceri, S. I.

1981-01-01

Two-dimensional phase-change problem is numerically solved in cylindrical coordinates (r and z) by utilizing two Taylor series expansions for the temperature distributions in the neighborhood of the interface location. These two expansions form two polynomials in r and z directions. For the regions sufficiently away from the interface the temperature field equations are numerically solved in the usual way and the results are coupled with the polynomials. The main advantages of this efficient approach include ability to accept arbitrarily time dependent boundary conditions of all types and arbitrarily specified initial temperature distributions. A modified approach using a single Taylor series expansion in two variables is also suggested.

A GUI visualization system for airborne lidar image data to reconstruct 3D city model

NASA Astrophysics Data System (ADS)

Kawata, Yoshiyuki; Koizumi, Kohei

2015-10-01

A visualization toolbox system with graphical user interfaces (GUIs) was developed for the analysis of LiDAR point cloud data, as a compound object oriented widget application in IDL (Interractive Data Language). The main features in our system include file input and output abilities, data conversion capability from ascii formatted LiDAR point cloud data to LiDAR image data whose pixel value corresponds the altitude measured by LiDAR, visualization of 2D/3D images in various processing steps and automatic reconstruction ability of 3D city model. The performance and advantages of our graphical user interface (GUI) visualization system for LiDAR data are demonstrated.

Hierarchical classification with a competitive evolutionary neural tree.

PubMed

Adams, R G.; Butchart, K; Davey, N

1999-04-01

A new, dynamic, tree structured network, the Competitive Evolutionary Neural Tree (CENT) is introduced. The network is able to provide a hierarchical classification of unlabelled data sets. The main advantage that the CENT offers over other hierarchical competitive networks is its ability to self determine the number, and structure, of the competitive nodes in the network, without the need for externally set parameters. The network produces stable classificatory structures by halting its growth using locally calculated heuristics. The results of network simulations are presented over a range of data sets, including Anderson's IRIS data set. The CENT network demonstrates its ability to produce a representative hierarchical structure to classify a broad range of data sets.

Selecting the Right Courseware for Your Online Learning Program.

ERIC Educational Resources Information Center

O'Mara, Heather

2000-01-01

Presents criteria for selecting courseware for online classes. Highlights include ease of use, including navigation; assessment tools; advantages of Java-enabled courseware; advantages of Oracle databases, including scalability; future possibilities for multimedia technology; and open architecture that will integrate with other systems. (LRW)

New oral anticoagulants: their advantages and disadvantages compared with vitamin K antagonists in the prevention and treatment of patients with thromboembolic events.

PubMed

Mekaj, Ymer H; Mekaj, Agon Y; Duci, Shkelzen B; Miftari, Ermira I

2015-01-01

Despite the discovery and application of many parenteral (unfractionated and low-molecular-weight heparins) and oral anticoagulant vitamin K antagonist (VKA) drugs, the prevention and treatment of venous and arterial thrombotic phenomena remain major medical challenges. Furthermore, VKAs are the only oral anticoagulants used during the past 60 years. The main objective of this study is to present recent data on non-vitamin K antagonist oral anticoagulants (NOACs) and to analyze their advantages and disadvantages compared with those of VKAs based on a large number of recent studies. NOACs are novel direct-acting medications that are selective for one specific coagulation factor, either thrombin (IIa) or activated factor X (Xa). Several NOACs, such as dabigatran (a direct inhibitor of FIIa) and rivaroxaban, apixaban and edoxaban (direct inhibitors of factor Xa), have been used for at least 5 years but possibly 10 years. Unlike traditional VKAs, which prevent the coagulation process by suppressing the synthesis of vitamin K-dependent factors, NOACs directly inhibit key proteases (factors IIa and Xa). The important indications of these drugs are the prevention and treatment of deep vein thrombosis and pulmonary embolisms, and the prevention of atherothrombotic events in the heart and brain of patients with acute coronary syndrome and atrial fibrillation. They are not fixed, and dose-various strengths are available. Most studies have reported that more advantages than disadvantages for NOACs when compared with VKAs, with the most important advantages of NOACs including safety issues (ie, a lower incidence of major bleeding), convenience of use, minor drug and food interactions, a wide therapeutic window, and no need for laboratory monitoring. Nonetheless, there are some conditions for which VKAs remain the drug of choice. Based on the available data, we can conclude that NOACs have greater advantages and fewer disadvantages compared with VKAs. New studies are required to further assess the efficacy of NOACs.

New oral anticoagulants: their advantages and disadvantages compared with vitamin K antagonists in the prevention and treatment of patients with thromboembolic events

PubMed Central

Mekaj, Ymer H; Mekaj, Agon Y; Duci, Shkelzen B; Miftari, Ermira I

2015-01-01

Despite the discovery and application of many parenteral (unfractionated and low-molecular-weight heparins) and oral anticoagulant vitamin K antagonist (VKA) drugs, the prevention and treatment of venous and arterial thrombotic phenomena remain major medical challenges. Furthermore, VKAs are the only oral anticoagulants used during the past 60 years. The main objective of this study is to present recent data on non-vitamin K antagonist oral anticoagulants (NOACs) and to analyze their advantages and disadvantages compared with those of VKAs based on a large number of recent studies. NOACs are novel direct-acting medications that are selective for one specific coagulation factor, either thrombin (IIa) or activated factor X (Xa). Several NOACs, such as dabigatran (a direct inhibitor of FIIa) and rivaroxaban, apixaban and edoxaban (direct inhibitors of factor Xa), have been used for at least 5 years but possibly 10 years. Unlike traditional VKAs, which prevent the coagulation process by suppressing the synthesis of vitamin K-dependent factors, NOACs directly inhibit key proteases (factors IIa and Xa). The important indications of these drugs are the prevention and treatment of deep vein thrombosis and pulmonary embolisms, and the prevention of atherothrombotic events in the heart and brain of patients with acute coronary syndrome and atrial fibrillation. They are not fixed, and dose-various strengths are available. Most studies have reported that more advantages than disadvantages for NOACs when compared with VKAs, with the most important advantages of NOACs including safety issues (ie, a lower incidence of major bleeding), convenience of use, minor drug and food interactions, a wide therapeutic window, and no need for laboratory monitoring. Nonetheless, there are some conditions for which VKAs remain the drug of choice. Based on the available data, we can conclude that NOACs have greater advantages and fewer disadvantages compared with VKAs. New studies are required to further assess the efficacy of NOACs. PMID:26150723

Did Babe Ruth Have a Comparative Advantage as a Pitcher?

ERIC Educational Resources Information Center

Scahill, Edward M.

1990-01-01

Advocates using baseball statistics to illustrate the advantages of specialization in production. Using Babe Ruth's record as an analogy, suggests a methodology for determining a player's comparative advantage as a teaching illustration. Includes the team's statistical profile in five tables to explain comparative advantage and profit maximizing.…

Use of piezoelectric multicomponent force measuring devices in fluid mechanics

NASA Technical Reports Server (NTRS)

Richter, A.; Stefan, K.

1979-01-01

The characterisitics of piezoelectric multicomponent transducers are discussed, giving attention to the advantages of quartz over other materials. The main advantage of piezoelectric devices in aerodynamic studies is their ability to indicate rapid changes in the values of physical parameters. Problems in the accuracy of measurments by piezoelectric devices can be overcome by suitable design approaches. A practical example is given of how such can be utilized to measure rapid fluctuations of fluid forces exerted on a circular cylinder mounted in a water channel.

Flow Control Technology

DTIC Science & Technology

2010-07-01

known as Darrieus turbines or, after the German inventors of these devices, Voith-Schneider propellers. Their main advantage is the ability to produce... turbines (VAWT), named for the typical orientation of the main shaft. While their efficiency is similar to that of the more common horizontal axis wind ...Oscillating Systems’, Cambridge University Press, 2002 [11] G. M. Darrieus , ’ Turbine having its rotating shaft transverse to the flow of the current

Research on the Application of GRC Material in Exhibition Decoration Engineering

NASA Astrophysics Data System (ADS)

Cai, Yan

2018-03-01

Glass fiber reinforced cement (GRC) is a kind of new building material which is based on cement and take the alkali resistant glass fiber as reinforcing material. It is mainly used in building decoration project and it has many advantages like environmental protection, economical, practical modeling and others. This paper mainly studies the concrete application of GRC material in exhibition building decoration project.

LMFBR with booster pump in pumping loop

DOEpatents

Rubinstein, H.J.

1975-10-14

A loop coolant circulation system is described for a liquid metal fast breeder reactor (LMFBR) utilizing a low head, high specific speed booster pump in the hot leg of the coolant loop with the main pump located in the cold leg of the loop, thereby providing the advantages of operating the main pump in the hot leg with the reliability of cold leg pump operation.

Economic Security Environment and Implementation of Planning, Programming, Budgeting, Execution (PPBE) System in Georgia

DTIC Science & Technology

2004-06-01

11 Table 2. Main Macroeconomic Indicators of the State Budget (From: Ref. 21) ...........13 Table 3. State Budget Expenditures...programs with alternative options and Budget Estimations - called Planning, Programming and Budget System (PPBS). The principles and main idea of Defense...about the political fundamentals of building the state, market economy principles , and the advantages of globalization. Georgia was among the first

Patients' experiences of continuity in the care of type 2 diabetes: a focus group study in primary care

PubMed Central

Alazri, Mohammed H; Neal, Richard D; Heywood, Phil; Leese, Brenda

2006-01-01

Background Continuity of care is fundamental to general practice and type 2 diabetes is a common chronic disease with major health and social impacts. Nevertheless continuity, as experienced by patients with type 2 diabetes, remains a neglected area. Aim To explore perceptions and experiences of continuity of care in general practice from the perspectives of patients with type 2 diabetes, focusing on the advantages and disadvantages of different types of continuity. Design of study Focus groups with patients. Setting Seven practices with different organisational structures in Leeds, UK. Method Seventy-nine patients with type 2 diabetes were recruited. Focus group interviews were conducted with 79 patients with type 2 diabetes from seven practices in Leeds, UK. Results Patients experienced three different types of continuity: relational (or longitudinal) continuity, cross-boundary (or team) continuity, and continuity of information. Patients' perceptions of continuity were influenced by several factors including a personal relationship between themselves and their healthcare professional, their own beliefs and behaviours, presence of diabetes, and the systems and structures of general practices. Patients identified the advantages and disadvantages of two types of continuity. Relational or longitudinal continuity was important in providing psychosocial care, but with a risk of misdiagnosis. The advantages of cross-boundary or team continuity were to provide physical care, whereas the main disadvantages were the absence of personal care and patient confusion. Conclusion Perceptions of continuity by patients with type 2 diabetes were influenced by several factors; they perceived several advantages and disadvantages associated with different types of continuity. Patients might expect certain healthcare benefits by following certain types of continuity. PMID:16834874

Orthopedic evaluation

NASA Technical Reports Server (NTRS)

Walden, T.

1978-01-01

The clinical performance of the Lixiscope in orthopedics was compared with routine radiography. Portability and size were the major advantages of the Lixiscope. The main disadvantage at this point in time was the Lixiscope's inability to study large areas.

Infrared Irradiation: Toward Green Chemistry, a Review.

PubMed

Escobedo, René; Miranda, René; Martínez, Joel

2016-03-26

This review provides a comprehensive overview of where infrared irradiation has been employed, mainly as regards activating green mode for natural products extractions, as well as to favor a reaction, highlighting its actual importance. It is also underlined that infrared irradiation heating has been around for a long time; however, only in the last eighteen years have many of its advantages been applied to satisfy a wide range of chemical processes, natural products extractions, and for the promotion of many kinds of reactions. In addition, it is brought to light that near infrared irradiation is more efficient than middle and far infrared irradiations, being easily controllable and with the quality of a fast responding heat source. Thus, the main objective of this review is to offer infrared irradiation as an alternative clean energy source to activate reactions, in addition to favor the selective extraction of natural products, all of which is within the Green Chemistry protocol. Some recent results from our laboratory are also included.

Infrared Irradiation: Toward Green Chemistry, a Review

PubMed Central

Escobedo, René; Miranda, René; Martínez, Joel

2016-01-01

This review provides a comprehensive overview of where infrared irradiation has been employed, mainly as regards activating green mode for natural products extractions, as well as to favor a reaction, highlighting its actual importance. It is also underlined that infrared irradiation heating has been around for a long time; however, only in the last eighteen years have many of its advantages been applied to satisfy a wide range of chemical processes, natural products extractions, and for the promotion of many kinds of reactions. In addition, it is brought to light that near infrared irradiation is more efficient than middle and far infrared irradiations, being easily controllable and with the quality of a fast responding heat source. Thus, the main objective of this review is to offer infrared irradiation as an alternative clean energy source to activate reactions, in addition to favor the selective extraction of natural products, all of which is within the Green Chemistry protocol. Some recent results from our laboratory are also included. PMID:27023535

Daylight-mediated photodynamic therapy in Spain: advantages and disadvantages.

PubMed

Pérez-Pérez, L; García-Gavín, J; Gilaberte, Y

2014-09-01

Photodynamic therapy (PDT) is an option for the treatment of actinic keratosis, Bowen disease, and certain types of basal cell carcinoma. It is also used to treat various other types of skin condition, including inflammatory and infectious disorders. The main disadvantages of PDT are the time it takes to administer (both for the patient and for health professionals) and the pain associated with treatment. Daylight-mediated PDT has recently been reported to be an alternative to the conventional approach. Several studies have shown it to be similar in efficacy to and better tolerated than classic PDT for the treatment of mild to moderate actinic keratosis. Nevertheless, most of these studies are from northern Europe, and no data have been reported from southern Europe. The present article reviews the main studies published to date, presents the treatment protocol, and summarizes our experience with a group of treated patients. Copyright © 2013 Elsevier España, S.L.U. y AEDV. All rights reserved.

[Design and application of silver needle-knife].

PubMed

Sun, Guodong; Shi, Bin; Zhang, Benwu; Xu, Haidong

2015-04-01

A silver needle-knife which has the dual function of silver needle and needle-knife is designed. The main components of this silver needle-knife are approximately 50% silver and approximately 50% nichrome. The silver needle-knife is composed of five parts, including needle-knife tail, spiral handle; steering handle, needle-knife body and needle-knife edge. It converges the advantages of needle-knife and silver needle, which can cut loose of diseased tissue and peel adhesion of lesions, but also be heated with moxa cone and thermal therapeutic instrument, and connect with electroacupuncture apparatus. It has the function of warming channel and removing coldness, dispelling wind and eliminating dampness, resolving spasm and relieving pain, dredging the channel and so on. Due to the spiral handle and the steering handle, the operation is easier, which reduces the blindness of cutting and increase the safety. It is mainly used for soft tissue injury, rheumatism and rheumatoid arthritis, as well as degenerative diseases of spine and joint, and it has obvious efficacy on some internal medical diseases.

Inclusion of Gaming Disorder in ICD has more advantages than disadvantages

PubMed Central

Király, Orsolya; Demetrovics, Zsolt

2017-01-01

This paper is a response to a recent debate paper in which Aarseth et al. argue that the inclusion of a formal diagnosis and categories for problematic video gaming or Gaming Disorder (GD) in the World Health Organization’s 11th Revision of the International Classification of Diseases (ICD-11) is premature and therefore the proposal should be removed. The present authors systematically address all the six main arguments presented by Aarseth et al. and argue that, even though some of the concerns presented in the debate paper are legitimate, the inclusion of GD in ICD-11 has more advantages than disadvantages. Furthermore, the present authors also argue that the two GD subtypes (“GD, predominantly online” and “GD, predominantly offline”) are unnecessary and rather problematic; the main category for GD would be perfectly sufficient. PMID:28816495

Solvothermal Synthesis of Magnetic Spinel Ferrites

PubMed Central

Rafienia, Mohammad; Bigham, Ashkan; Hassanzadeh-Tabrizi, Seyed Ali

2018-01-01

At present, solvothermal fabrication method has widely been applied in the synthesis of spinel ferrite nanoparticles (SFNs), which is mainly because of its great advantages such as precise control over size, shape distribution, and high crystallinity that do not require postannealing treatment. Among various SFNs, Fe3O4 nanoparticles have attracted tremendous attention because of their favorable physical and structural properties which are advantageous, especially in biomedical applications, among which the vast application of these materials as targeted drug delivery systems, hyperthermia, and imaging agents in cancer therapy can be mentioned. The main focus of this study is to present an introduction to solvothermal method and key synthesis parameters of SFNs through this synthesis route. Moreover, most recent progress on the potential applications of Fe3O4 nanoparticles as the most important compound among the spinel ferrites family members is discussed. PMID:29928636

Inclusion of Gaming Disorder in ICD has more advantages than disadvantages.

PubMed

Király, Orsolya; Demetrovics, Zsolt

2017-09-01

This paper is a response to a recent debate paper in which Aarseth et al. argue that the inclusion of a formal diagnosis and categories for problematic video gaming or Gaming Disorder (GD) in the World Health Organization's 11th Revision of the International Classification of Diseases (ICD-11) is premature and therefore the proposal should be removed. The present authors systematically address all the six main arguments presented by Aarseth et al. and argue that, even though some of the concerns presented in the debate paper are legitimate, the inclusion of GD in ICD-11 has more advantages than disadvantages. Furthermore, the present authors also argue that the two GD subtypes ("GD, predominantly online" and "GD, predominantly offline") are unnecessary and rather problematic; the main category for GD would be perfectly sufficient.

Is There an Islamist Political Advantage?

PubMed Central

Cammett, Melani; Luong, Pauline Jones

2014-01-01

There is a widespread presumption that Islamists have an advantage over their opponents when it comes to generating mass appeal and winning elections. The question remains, however, as to whether these advantages—or, what we refer to collectively as an Islamist political advantage—actually exist. We argue that—to the extent that Islamists have a political advantage—the primary source of this advantage is reputation rather than the provision of social services, organizational capacity, or ideological hegemony. Our purpose is not to dismiss the main sources of the Islamist governance advantage identified in scholarly literature and media accounts, but to suggest a different causal path whereby each of these factors individually and sometimes jointly promotes a reputation for Islamists as competent, trustworthy, and pure. It is this reputation for good governance that enables Islamists to distinguish themselves in the streets and at the ballot box. PMID:25767370

Explaining Asian Americans' academic advantage over whites.

PubMed

Hsin, Amy; Xie, Yu

2014-06-10

The superior academic achievement of Asian Americans is a well-documented phenomenon that lacks a widely accepted explanation. Asian Americans' advantage in this respect has been attributed to three groups of factors: (i) socio-demographic characteristics, (ii) cognitive ability, and (iii) academic effort as measured by characteristics such as attentiveness and work ethic. We combine data from two nationally representative cohort longitudinal surveys to compare Asian-American and white students in their educational trajectories from kindergarten through high school. We find that the Asian-American educational advantage is attributable mainly to Asian students exerting greater academic effort and not to advantages in tested cognitive abilities or socio-demographics. We test explanations for the Asian-white gap in academic effort and find that the gap can be further attributed to (i) cultural differences in beliefs regarding the connection between effort and achievement and (ii) immigration status. Finally, we highlight the potential psychological and social costs associated with Asian-American achievement success.

The relationship among the resiliency practices in supply chain, financial performance, and competitive advantage in manufacturing firms in Indonesia and Sierra Leone

NASA Astrophysics Data System (ADS)

Musa, I.; Nyoman Pujawan, I.

2018-04-01

Current supply chain management (SCM) has become a potentially treasured way of safeguarding competitive advantage and improving organizational performance since competition is no longer between organizations, but among supply chains. This research conceptualizes and develops four resiliency practices (Flexibility, Redundancy, Collaboration and Agility) and tests the relationships between organizations’ financial performance and competitive advantage in manufacturing firms. The study involves manufacturing firms in Indonesia and Sierra Leone. The study used stratified random sampling to pick a sample size of 95 manufacturing firms, which represented different industrial sectors. The respondents were mainly managers of different manufacturing companies. The relationships proposed in the conceptual framework were tested using correlation analysis. The results indicate that higher levels of resilience practices in manufacturing firms can lead to enhanced competitive advantage and improved financial performance.

AN OBJECTIVE DEFINITION FOR THE MAIN SEQUENCE OF STAR-FORMING GALAXIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renzini, Alvio; Peng, Ying-jie, E-mail: alvio.renzini@oapd.inaf.it, E-mail: y.peng@mrao.cam.ac.uk

The main sequence (MS) of star-forming (SF) galaxies plays a fundamental role in driving galaxy evolution and our efforts to understand it. However, different studies find significant differences in the normalization, slope, and shape of the MS. These discrepancies arise mainly from the different selection criteria adopted to isolate SF galaxies, which may include or exclude galaxies with a specific star formation rate (SFR) substantially below the MS value. To obviate this limitation of all current criteria, we propose an objective definition of the MS that does not rely at all on a pre-selection of SF galaxies. Constructing the 3Dmore » SFR–mass–number plot, the MS is then defined as the ridge line of the SF peak, as illustrated with various figures. The advantages of such a definition are manifold. If generally adopted, it will facilitate the inter-comparison of results from different groups using the same SFR and stellar mass diagnostics, or it will highlight the relative systematics of different diagnostics. All of this could help to understand MS galaxies as systems in a quasi-steady state equilibrium and would also provide a more objective criterion for identifying quenching galaxies.« less

Make-to-order manufacturing - new approach to management of manufacturing processes

NASA Astrophysics Data System (ADS)

Saniuk, A.; Waszkowski, R.

2016-08-01

Strategic management must now be closely linked to the management at the operational level, because only in such a situation the company can be flexible and can quickly respond to emerging opportunities and pursue ever-changing strategic objectives. In these conditions industrial enterprises seek constantly new methods, tools and solutions which help to achieve competitive advantage. They are beginning to pay more attention to cost management, economic effectiveness and performance of business processes. In the article characteristics of make-to-order systems (MTO) and needs associated with managing such systems is identified based on the literature analysis. The main aim of this article is to present the results of research related to the development of a new solution dedicated to small and medium enterprises manufacture products solely on the basis of production orders (make-to- order systems). A set of indicators to enable continuous monitoring and control of key strategic areas this type of company is proposed. A presented solution includes the main assumptions of the following concepts: the Performance Management (PM), the Balanced Scorecard (BSC) and a combination of strategic management with the implementation of operational management. The main benefits of proposed solution are to increase effectiveness of MTO manufacturing company management.

Soy protein for infant feeding: what do we know?

PubMed

Turck, Dominique

2007-05-01

This review discusses the safety, nutritional adequacy and recommendations for use of soy protein formulae, based mainly on the most relevant reports published during 2005 and 2006. Concerns have recently been raised regarding potential risks with soy protein formulae, in particular regarding their high phytoestrogenic isoflavone content. Recent data are insufficient to draw definitive conclusions on safety, but authorities and paediatric societies from several countries recently advised health professionals to use soy protein formulae only in certain cases. Indications for use of soy protein formulae, mainly for prevention and management of food allergy, have also been better defined. Soy protein formulae ensure normal growth and development in healthy term infants but they have no nutritional advantages over cow's milk protein formulae. Main indications include severe lactose intolerance, galactosaemia and need to avoid foods of animal origin. Soy protein formulae have no role in preventing allergy or in management of nonspecific gastrointestinal symptoms (e.g. infantile colic and regurgitation). They should not be used in preterm infants or infants with food allergy before age 6 months. After 6 months, soy protein formulae may be considered if tolerance to soy protein is established.

Worker reproduction of the invasive yellow crazy ant Anoplolepis gracilipes.

PubMed

Lee, Ching-Chen; Nakao, Hirotaka; Tseng, Shu-Ping; Hsu, Hung-Wei; Lin, Gwo-Li; Tay, Jia-Wei; Billen, Johan; Ito, Fuminori; Lee, Chow-Yang; Lin, Chung-Chi; Yang, Chin-Cheng Scotty

2017-01-01

Reproductive division of labor is one of the key features of social insects. Queens are adapted for reproduction while workers are adapted for foraging and colony maintenance. In many species, however, workers retain functional ovaries and can lay unfertilized male eggs or trophic eggs. Here we report for the first time on the occurrence of physogastric workers and apparent worker reproduction in the invasive yellow crazy ant Anoplolepis gracilipes (Fr. Smith). We further examined the reproductive potential and nutritional role of physogastric workers through multidisciplinary approaches including morphological characterization, laboratory manipulation, genetic analysis and behavioral observation. Egg production with two types of eggs, namely reproductive and trophic eggs, by physogastric workers was found. The reproductive egg was confirmed to be haploid and male-destined, suggesting that the workers produced males via arrhenotokous parthenogenesis as no spermatheca was discovered. Detailed observations suggested that larvae were mainly fed with trophic eggs. Along with consumption of trophic eggs by queens and other castes as part of their diet, the vital role of physogastric workers as "trophic specialist" is confirmed. We propose that adaptive advantages derived from worker reproduction for A. gracilipes may include 1) trophic eggs provisioned by physogastric workers likely assist colonies of A. gracilipes in overcoming unfavorable conditions such as paucity of food during critical founding stage; 2) worker-produced males are fertile and thus might offer an inclusive fitness advantage for the doomed orphaned colony.

Correction of accessory axillary breast tissue without visible scar.

PubMed

Kim, Young Soo

2004-01-01

Various methods for correction of accessory axillary breast tissue have been proposed, including simple excision, diamond-shaped excision, a Y-V technique, and lipoplasty. We present an effective method for correction of a prominent axillary mound that combines lipoplasty with excision of accessory breast tissue along the axillary transverse line. Preoperative markings included an incision within the natural wrinkle line in the axillary fold, and demarcation of areas in which lipoplasty and excision were to be performed. After lipoplasty, deep dissection was performed to isolate and remove accessory breast tissue and excess fat tissue. A compression dressing was applied for 1 to 2 weeks postoperatively, and the patient was instructed to wear a sports bra for 1 to 2 months after removal of the dressing. We treated 7 patients using this procedure between October 1999 and March 2003. No major postoperative complications were detected and recurrence was not noted during the follow-up periods. Aesthetic results were satisfactory. We believe that a procedure that combines lipoplasty and excision provides numerous advantages as a surgical option in treating a prominent axillary mound. The main advantage is that the final scar is laid in the natural axillary fold, rendering scars less conspicuous and eliminating the need to remove excess skin. The one disadvantage was that elevation of the skin flap via small, remote incisions initially produced surgical difficulties, but these were overcome with experience.

Experimental study of main rotor tip geometry and tail rotor interactions in hover. Volume 1. Text and figures

NASA Technical Reports Server (NTRS)

Balch, D. T.; Lombardi, J.

1985-01-01

A model scale hover test was conducted in the Sikorsky Aircraft Model rotor hover Facility to identify and quantify the impact of the tail rotor on the demonstrated advantages of advanced geometry tip configurations. The test was conducted using the Basic Model Test Rig and two scaled main rotor systems, one representing a 1/5.727 scale UH-60A BLACK HAWK and the others a 1/4.71 scale S-76. Eight alternate rotor tip configurations were tested, 3 on the BLACK HAWK rotor and 6 on the S-76 rotor. Four of these tips were then selected for testing in close proximity to an operating tail rotor (operating in both tractor and pusher modes) to determine if the performance advantages that could be obtained from the use of advanced geometry tips in a main rotor only environment would still exist in the more complex flow field involving a tail rotor. The test showed that overall the tail rotor effects on the advanced tip configurations tested are not substantially different from the effects on conventional tips.

Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials.

PubMed

Guttman, Nurit

2015-11-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reprint of "Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials".

PubMed

Guttman, Nurit

2016-12-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

Site-Specific Advantages in Skeletal Geometry and Strength at the Proximal Femur and Forearm in Young Female Gymnasts

PubMed Central

Dowthwaite, Jodi N.; Rosenbaum, Paula F.; Scerpella, Tamara A.

2012-01-01

Purpose We evaluated site-specific skeletal adaptation to loading during growth,comparing radius (RAD) and femoral neck (FN) DXA scans in young female gymnasts (GYM) and non-gymnasts (NON). Methods Subjects from an ongoing longitudinal study (8-26 yrs old) underwent annual DXA scans (proximal femur, forearm, total body) and anthropometry, completing maturity and physical activity questionnaires. This cross-sectional analysis used the most recent data meeting the following criteria: gynecological age ≤2.5 yrs post-menarche; GYM annual mean gymnastic exposure ≥5.0 h/wk in the prior year. Bone geometric and strength indices were derived from scans for 173 subjects (8-17 yrs old) via hip structural analysis (femoral narrow neck, NN) and similar radius formulae (1/3 and Ultradistal (UD)). Maturity was coded as M1 (Tanner I breast), M2 (pre-menarche, ≥Tanner II breast) or M3 (post-menarche). ANOVA and chi square compared descriptive data. Two factor ANCOVA adjusted for age, height, total body non-bone lean mass and percent body fat; significance was tested for main effects and interactions between gymnastic exposure and maturity. Results At the distal radius, GYM means were significantly greater than NON means for all variables (p<0.05). At the proximal femur, GYM exhibited narrower periosteal and endosteal dimensions, but greater indices of cortical thickness, BMC, aBMD and section modulus, with lower buckling ratio (p <0.05). However, significant interactions between maturity and loading were detected for the following: 1) FN bone mineral content (BMC), NN buckling ratio (GYM BMC advantages only in M1 and M3; for BMC and buckling ratio, M1 advantages were greatest; 2) 1/3 radius BMC, width, endosteal diameter, cortical cross-sectional area, section modulus (GYM advantages primarily post-menarche); 3) UD radius BMC and axial compressive strength (GYM advantages were larger with greater maturity, greatest post-menarche). Conclusions Maturity-specific comparisons suggested site-specific skeletal adaptation to loading during growth, with greater advantages at the radius versus the proximal femur. At the radius, GYM advantages included greater bone width, cortical cross-sectional area and cortical thickness; in contrast, at the femoral neck, GYM bone tissue cross-sectional area and cortical thickness were greater, but bone width was narrower than in NON. Future longitudinal analyses will evaluate putative maturity-specific differences. PMID:22342799

Evaluation of bridge deck delamination investigation methods

DOT National Transportation Integrated Search

1998-07-01

An objective view of the relative advantages and limitations of the nondestructive, testing and evaluation methods that currently used in the inspection of bridge decks is presented and discussed. The three main nondestructive testing technologies th...

Data survey on the effect of product features on competitive advantage of selected firms in Nigeria.

PubMed

Olokundun, Maxwell; Iyiola, Oladele; Ibidunni, Stephen; Falola, Hezekiah; Salau, Odunayo; Amaihian, Augusta; Peter, Fred; Borishade, Taiye

2018-06-01

The main objective of this study was to present a data article that investigates the effect product features on firm's competitive advantage. Few studies have examined how the features of a product could help in driving the competitive advantage of a firm. Descriptive research method was used. Statistical Package for Social Sciences (SPSS 22) was engaged for analysis of one hundred and fifty (150) valid questionnaire which were completed by small business owners registered under small and medium scale enterprises development of Nigeria (SMEDAN). Stratified and simple random sampling techniques were employed; reliability and validity procedures were also confirmed. The field data set is made publicly available to enable critical or extended analysis.

Adolescents' experiences and perceived (dis)advantages of the three main outlet types for alcohol purchases.

PubMed

Gosselt, Jordy F; Strump, Tanja; Van Hoof, Joris

2016-12-01

Based on the existing literature, relevant determinants of availability for on-premises locations, off-premises locations, and the Internet were qualitatively explored and categorized by "experts" consisting of underage alcohol purchasers. In total, 14 focus group discussions were conducted with 94 Dutch adolescents. For on-premises locations, the high prices were perceived as the biggest disadvantage, and the ease to circumvent legal age limits as the biggest advantage. For off-premises locations, the cheap pricing was perceived as the most positive aspect, and the legal age limit as the biggest disadvantage. For online purchases, the waiting time was perceived as the most negative aspect, and the proximity of online stores as the biggest advantage. © The Author(s) 2015.

Possibility of heat recovery from gray water in residential building

NASA Astrophysics Data System (ADS)

Mazur, Aleksandra; Słyś, Daniel

2017-12-01

Recovery of waste heat from gray water can be an interesting alternative to other energy saving systems in a building, including alternative energy sources. Mainly, due to a number of advantages including independence from weather conditions, small investment outlay, lack of user support, or a slight interference with the installation system. The purpose of this article is to present the financial effectiveness of installations which provide hot, usable water to a detached house, using a Drain Water Heat Recovery (DWHR) system depending on the number of system users and the various combinations of bathing time in the shower, which has an influence on the daily warm water demand in each of the considered options. The economic analysis of the adopted installation variants is based on the Life Cycle Cost (LCC) method, which is characterized by the fact that it also includes the operating costs in addition to the capital expenditure during the entire analysis period. For each case, the necessary devices were selected and the cost of their installation was estimated.

Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics.

PubMed

Noh, Yohan; Bimbo, Joao; Sareh, Sina; Wurdemann, Helge; Fraś, Jan; Chathuranga, Damith Suresh; Liu, Hongbin; Housden, James; Althoefer, Kaspar; Rhode, Kawal

2016-11-17

This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor's main advantages are: (1) Low power consumption; (2) low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges); (3) the ability to be embedded into different mechanical structures; (4) miniaturisation; (5) simple manufacture and customisation to fit a wide-range of robot systems; and (6) low-cost fabrication and assembly of sensor structure. For these reasons, the proposed multi-axis force/torque sensor can be used in a wide range of application areas including medical robotics, manufacturing, and areas involving human-robot interaction. This paper shows the application of our concept of a force/torque sensor to flexible continuum manipulators: A cylindrical MIS (Minimally Invasive Surgery) robot, and includes its design, fabrication, and evaluation tests.

Seal Apparatus and Methods to Manufacture Thereof

NASA Technical Reports Server (NTRS)

Richard, James A. (Inventor)

2013-01-01

In some implementations, apparatus and methods are provided through which a dynamic cryogenic seal is manufactured. In some implementations, the seal includes a retainer and a spring-seal assembly, the assembly being comprised of a main spring housing and fluorine-containing polymer seals. In some implementations, either a radial seal, or an axial (or "piston seal") is provided. In some implementations, methods of manufacturing the dynamic cryogenic seal are also provided. In some implementations, the methods include assembling the components while either heated or cooled, taking advantage of thermal expansion and contraction, such that there is a strong interference fit between the components at room temperature. In some implementations, this process ensures that the weaker fluorine-containing polymer seal is forced to expand and contract with the stronger retainer and spring and is under constant preload. In some implementations, the fluorine-containing polymer is therefore fluidized and retained, and can not lift off.

Coaxial atomization of a round liquid jet in a high speed gas stream: A phenomenological study

NASA Astrophysics Data System (ADS)

Mayer, W. O. H.

1994-05-01

Coaxial injectors have proven to be advantageous for the injection, atomization and mixing of propellants in cryogenic H2/O2 rocket engines. Thereby, a round liquid oxygen jet is atomized by a fast, coaxial gaseous hydrogen jet. This article summarizes phenomenological studies of coaxial spray generation under a broad variation of influencing parameters including injector design, inflow, and fluid conditions. The experimental investigations, performed using spark light photography and high speed cinematography in a shadow graph setup as main diagnostic means, illuminate the most important processes leading to atomization. These are identified as turbulence in the liquid jet, surface instability, surface wave growth and droplet detachment. Numerical simulations including free surface flow phenomena are a further diagnostic tool to elucidate some atomization particulars. The results of the study are of general importance in the field of liquid atomization.

Advances in multi-sensor data fusion: algorithms and applications.

PubMed

Dong, Jiang; Zhuang, Dafang; Huang, Yaohuan; Fu, Jingying

2009-01-01

With the development of satellite and remote sensing techniques, more and more image data from airborne/satellite sensors have become available. Multi-sensor image fusion seeks to combine information from different images to obtain more inferences than can be derived from a single sensor. In image-based application fields, image fusion has emerged as a promising research area since the end of the last century. The paper presents an overview of recent advances in multi-sensor satellite image fusion. Firstly, the most popular existing fusion algorithms are introduced, with emphasis on their recent improvements. Advances in main applications fields in remote sensing, including object identification, classification, change detection and maneuvering targets tracking, are described. Both advantages and limitations of those applications are then discussed. Recommendations are addressed, including: (1) Improvements of fusion algorithms; (2) Development of "algorithm fusion" methods; (3) Establishment of an automatic quality assessment scheme.

Research and industrialization of near-net rolling technology used in shaft parts

NASA Astrophysics Data System (ADS)

Hu, Zhenghuan; Wang, Baoyu; Zheng, Zhenhua

2017-11-01

Shaft part rolling is an efficient and green nearnet shaping technology offering many advantages, including high production efficiency, high material utilization rate, high product quality, and excellent production environment. In this paper, the features of shaft part rolling are introduced along with the working principles of two main shaft part rolling technologies, namely, cross wedge rolling (CWR) and skew rolling (SR). In relation to this technology, some R&D achievements gained by the University of Science and Technology Beijing are summarized. Finally, the latest developments in shaft part rolling are presented, including SR steel balls, precise forming of camshaft blank by CWR, SR phosphorous copper balls at room temperature, and CWR hollow axle sleeve. Although the shaft part rolling technology has been widely used in China, it only accounts for about 15% of applicable parts at present. Nevertheless, this technology has broad application prospects.

Research and industrialization of near-net rolling technology used in shaft parts

NASA Astrophysics Data System (ADS)

Hu, Zhenghuan; Wang, Baoyu; Zheng, Zhenhua

2018-03-01

Shaft part rolling is an efficient and green nearnet shaping technology offering many advantages, including high production efficiency, high material utilization rate, high product quality, and excellent production environment. In this paper, the features of shaft part rolling are introduced along with the working principles of two main shaft part rolling technologies, namely, cross wedge rolling (CWR) and skew rolling (SR). In relation to this technology, some R&D achievements gained by the University of Science and Technology Beijing are summarized. Finally, the latest developments in shaft part rolling are presented, including SR steel balls, precise forming of camshaft blank by CWR, SR phosphorous copper balls at room temperature, and CWR hollow axle sleeve. Although the shaft part rolling technology has been widely used in China, it only accounts for about 15% of applicable parts at present. Nevertheless, this technology has broad application prospects.

Madelung's Disease: Lipectomy or Liposuction?

PubMed Central

Chen, Chun-Ye; Fang, Qing-Qing; Wang, Xiao-Feng; Zhang, Min-Xia; Zhao, Wan-Yi; Shi, Bang-Hui; Wu, Li-Hong; Zhang, Li-Yun

2018-01-01

Background Madelung's disease is a rare lipid metabolic disorder characterized by diffuse, uncapsulated lipomas in the neck, shoulder, and other areas. It mainly affects middle-aged men and is related to alcohol abuse, and the cause is not clear. Surgical treatments include lipectomy and liposuction. Methods This systematic review analyzed the treatment of Madelung's disease described in 52 articles including complete patient details, published between 2000 and 2015, and retrieved from the Web of Science, PubMed, Medline, and Embase. Results Lipectomy was performed in most cases and achieved more complete removal and better control of iatrogenic lesions of nearby structures than liposuction. Liposuction achieved good cosmetic results and is simpler and less invasive than lipectomy, but clinical experience is limited. Conclusions Both lipectomy and liposuction have advantages and drawbacks. Surgeons should base the choice of optimal treatment on patient characteristics. Novel surgical techniques and etiologically targeted treatments hold promise as future therapies. PMID:29682541

Madelung's Disease: Lipectomy or Liposuction?

PubMed

Chen, Chun-Ye; Fang, Qing-Qing; Wang, Xiao-Feng; Zhang, Min-Xia; Zhao, Wan-Yi; Shi, Bang-Hui; Wu, Li-Hong; Zhang, Li-Yun; Tan, Wei-Qiang

2018-01-01

Madelung's disease is a rare lipid metabolic disorder characterized by diffuse, uncapsulated lipomas in the neck, shoulder, and other areas. It mainly affects middle-aged men and is related to alcohol abuse, and the cause is not clear. Surgical treatments include lipectomy and liposuction. This systematic review analyzed the treatment of Madelung's disease described in 52 articles including complete patient details, published between 2000 and 2015, and retrieved from the Web of Science, PubMed, Medline, and Embase. Lipectomy was performed in most cases and achieved more complete removal and better control of iatrogenic lesions of nearby structures than liposuction. Liposuction achieved good cosmetic results and is simpler and less invasive than lipectomy, but clinical experience is limited. Both lipectomy and liposuction have advantages and drawbacks. Surgeons should base the choice of optimal treatment on patient characteristics. Novel surgical techniques and etiologically targeted treatments hold promise as future therapies.

Mucoralean fungi for sustainable production of bioethanol and biologically active molecules.

PubMed

Satari, Behzad; Karimi, Keikhosro

2018-02-01

Mucoralean fungi are suitable microorganisms for the sustainable production of food, fodder, and fuels from inexpensive natural resources. Ethanol-producing Mucorales are particularly advantageous for second-generation ethanol production in comparison to the conventional ethanolic yeasts and bacteria. They are able to ferment a wide range of sugars to a range of valuable products, while they are typically resistance against the inhibitors available in different substrates, including untreated lignocellulosic hydrolysates. In addition to a high ethanol yield, the fungi produce several commercially valuable by-products, including chitosan, microbial oil (mainly polyunsaturated fatty acids), and protein. Moreover, the fungal extracts can replace the expensive nutrients required in fermentation. Besides, their morphologies can be altered from filamentous to yeast like and are adjustable based on the process requirement. The focus of this review is on applying Mucorales in producing ethanol and the biomass by-products thereof.

Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics

PubMed Central

Noh, Yohan; Bimbo, Joao; Sareh, Sina; Wurdemann, Helge; Fraś, Jan; Chathuranga, Damith Suresh; Liu, Hongbin; Housden, James; Althoefer, Kaspar; Rhode, Kawal

2016-01-01

This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor’s main advantages are: (1) Low power consumption; (2) low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges); (3) the ability to be embedded into different mechanical structures; (4) miniaturisation; (5) simple manufacture and customisation to fit a wide-range of robot systems; and (6) low-cost fabrication and assembly of sensor structure. For these reasons, the proposed multi-axis force/torque sensor can be used in a wide range of application areas including medical robotics, manufacturing, and areas involving human–robot interaction. This paper shows the application of our concept of a force/torque sensor to flexible continuum manipulators: A cylindrical MIS (Minimally Invasive Surgery) robot, and includes its design, fabrication, and evaluation tests. PMID:27869689

Life on an Island: Early Settlers off the Rock Bound Coast of Maine. Teaching with Historic Places.

ERIC Educational Resources Information Center

Hobbs-Olson, Laurie

This lesson, based on National Register of Historic Places files, describes early settlers' lives on some of the approximately 5,000 islands off the coast of Maine. During the mid-18th century many of these islands began to be inhabited by settlers eager to take advantage of this interface between land and sea. The lesson discusses the Blue Duck…

The effects of achene type and germination time on plant performance in the heterocarpic Anacyclus clavatus (Asteraceae).

PubMed

Afonso, Ana; Castro, Sílvia; Loureiro, João; Mota, Lucie; Cerca de Oliveira, José; Torices, Rubén

2014-05-01

• In heterocarpy, fruits with different morphologies have been associated with alternative strategies of dispersal, germination, dormancy, and seedling competitive ability. In heterocarpic species, it is common to find fruits with competitive or dispersal syndromes. The competitive advantage of nondispersing fruits has been frequently attributed to their larger size, but recent studies have suggested that this could also be mediated by germination time. The main objective of our study was to investigate which factor, fruit type or germination time, most affects plant performance and, consequently, competitive ability, using the heterocarpic species Anacyclus clavatus• To explore the effects of achene type and germination time on plant performance, we followed an innovative experimental approach including two experiments: one allowing for differences in germination time, and the other evaluating the effect of achene type alone by synchronizing germination time.• A significant effect of germination time on several postdispersal life-history traits was observed: Achenes that germinated earlier produced plants with higher biomass and reproductive effort. When germination time was controlled, no significant differences were observed in any of the traits.• The competitive advantage of achenes with different morphologies was mainly mediated by germination time and not by differences in size or other intrinsic traits. The consequences of these results are discussed in light of the dispersal-competition trade-off. Our experimental approach (i.e., the synchronization of germination time) revealed the importance of manipulative experiments for testing the effects of germination time on plant survival and performance. © 2014 Botanical Society of America, Inc.

Fourier Transform Infrared Spectroscopy: Part II. Advantages of FT-IR.

ERIC Educational Resources Information Center

Perkins, W. D.

1987-01-01

This is Part II in a series on Fourier transform infrared spectroscopy (FT-IR). Described are various advantages of FT-IR spectroscopy including energy advantages, wavenumber accuracy, constant resolution, polarization effects, and stepping at grating changes. (RH)

Strongly-motivated positive affects induce faster responses to local than global information of visual stimuli: an approach using large-size Navon letters.

PubMed

Noguchi, Yasuki; Tomoike, Kouta

2016-01-12

Recent studies argue that strongly-motivated positive emotions (e.g. desire) narrow a scope of attention. This argument is mainly based on an observation that, while humans normally respond faster to global than local information of a visual stimulus (global advantage), positive affects eliminated the global advantage by selectively speeding responses to local (but not global) information. In other words, narrowing of attentional scope was indirectly evidenced by the elimination of global advantage (the same speed of processing between global and local information). No study has directly shown that strongly-motivated positive affects induce faster responses to local than global information while excluding a bias for global information (global advantage) in a baseline (emotionally-neutral) condition. In the present study, we addressed this issue by eliminating the global advantage in a baseline (neutral) state. Induction of positive affects under this state resulted in faster responses to local than global information. Our results provided direct evidence that positive affects in high motivational intensity narrow a scope of attention.

The stakeholder preference for best management practices in the Three Gorges Reservoir Region.

PubMed

Qiu, Jiali; Shen, Zhenyao; Chen, Lei; Xie, Hui; Sun, Chengchun; Huang, Qin

2014-11-01

A qualitative analysis of in-depth interviews with 92 farmers and 42 policy managers in Wuxi County, the Three Gorges Reservoir Region, was conducted to identify stakeholder preferences for alternative best management practices (BMPs) and to determine the factors that affect their acceptance. Policy manager support for most of the practices was relatively stronger than support by farmers, except for the grade stabilization structure (GSS), hillside ditch (HD) and constructed wetland alternative, owing to their perceptions of soil benefits, economic advantages and environmental advantages. Farmers opposed those practices that occupied cultivated lands or changed the conventional planting methods, such as field border, conservation tillage (CT) and contour buffer strips. They tended to accept the BMPs with off-farm pollution reduction, such as GSS, riparian forest buffer and HD, and the BMPs associated with soil benefits, such as nutrient management and Terrace. The result that almost all respondents did not accept CT differed from reports in the existing literature. There is a significant correlation between the acceptance of some BMPs and the townships where the farmers lived (P ≤ 0.05). The environmental conditions and social factors would affect farmer support for BMPs, including local soil conditions, farming methods, economic income, education level and age. The economic advantages of the BMPs were the main motivation for farmers to accept the practices. Furthermore, intensive education efforts, financial incentives or economic subsidies may promote the adoption of the BMPs in our study area.

3D-printing techniques in a medical setting: a systematic literature review.

PubMed

Tack, Philip; Victor, Jan; Gemmel, Paul; Annemans, Lieven

2016-10-21

Three-dimensional (3D) printing has numerous applications and has gained much interest in the medical world. The constantly improving quality of 3D-printing applications has contributed to their increased use on patients. This paper summarizes the literature on surgical 3D-printing applications used on patients, with a focus on reported clinical and economic outcomes. Three major literature databases were screened for case series (more than three cases described in the same study) and trials of surgical applications of 3D printing in humans. 227 surgical papers were analyzed and summarized using an evidence table. The papers described the use of 3D printing for surgical guides, anatomical models, and custom implants. 3D printing is used in multiple surgical domains, such as orthopedics, maxillofacial surgery, cranial surgery, and spinal surgery. In general, the advantages of 3D-printed parts are said to include reduced surgical time, improved medical outcome, and decreased radiation exposure. The costs of printing and additional scans generally increase the overall cost of the procedure. 3D printing is well integrated in surgical practice and research. Applications vary from anatomical models mainly intended for surgical planning to surgical guides and implants. Our research suggests that there are several advantages to 3D-printed applications, but that further research is needed to determine whether the increased intervention costs can be balanced with the observable advantages of this new technology. There is a need for a formal cost-effectiveness analysis.

Flexible endoscope-assisted evacuation of chronic subdural hematomas.

PubMed

Májovský, Martin; Masopust, Václav; Netuka, David; Beneš, Vladimír

2016-10-01

Chronic subdural hematoma (CSDH) is a common neurosurgical condition with an increasing incidence. Standard treatment of CSDHs is surgical evacuation. The objective of this study is to present a modification of standard burr-hole hematoma evacuation using a flexible endoscope and to assess the advantages and risks. Prospectively, 34 consecutive patients diagnosed with CSDH were included in the study. Epidemiological, clinical and radiographical data were collected and reviewed. All patients underwent a burr-hole evacuation of CSDH. A flexible endoscope was inserted and subdural space inspected during surgery. The surgeon was looking specifically for the presence of septations, draining catheter position and acute bleeding. Thirty-four patients underwent 37 endoscope-assisted surgeries. Presenting symptoms were hemiparesis (79%), decreased level of consciousness (18%), gait disturbances (15%), headache (12%), aphasia (6%), cognitive disturbances (6%) and epileptic seizure (3%). Average operative time was 43 min, and the average increase in operative time due to the use of the endoscope was 6 min. Recurrence rate was 8.8%, and clinical outcome was favorable (defined as mRS ≤ 2) in 97% of the cases. To our knowledge, the present cohort of 34 patients is the largest group of patients with CSDH treated using an endoscope. This technique allows decent visualization of the hematoma cavity while retaining the advantages of a minimally invasive approach under a local anesthesia. The main advantages are correct positioning of the catheter under visual control, identification of septations and early detection of cortex or vessel injury during surgery.

Advantages and Disadvantages of Health Care Accreditation Mod-els.

PubMed

Tabrizi, Jafar S; Gharibi, Farid; Wilson, Andrew J

2011-01-01

This systematic review seeks to define the general advantages and disadvan-tages of accreditation programs to assist in choosing the most appropriate approach. Systematic search of SID, Ovid Medline & PubMed databases was conducted by the keywords of accreditation, hospital, medical practice, clinic, accreditation models, health care and Persian meanings. From 2379 initial articles, 83 articles met the full inclusion criteria. From initial analysis, 23 attributes were identified which appeared to define advantages and disadvantages of different accreditation approaches and the available systems were compared on these. Six systems were identified in the international literature including the JCAHO from USA, the Canadian program of CCHSA, and the accreditation programs of UK, Australia, New Zealand and France. The main distinguishing attributes among them were: quality improve-ment, patient and staff safety, improving health services integration, public's confi-dence, effectiveness and efficiency of health services, innovation, influence global standards, information management, breadth of activity, history, effective relationship with stakeholders, agreement with AGIL attributes and independence from government. Based on 23 attributes of comprehensive accreditation systems we have defined from a systematic review, the JCAHO accreditation program of USA and then CCHSA of Can-ada offered the most comprehensive systems with the least disadvantages. Other programs such as the ACHS of Australia, ANAES of France, QHNZ of New Zealand and UK accredita-tion programs were fairly comparable according to these criteria. However the decision for any country or health system should be based on an assessment weighing up their specific objec-tives and needs.

Automated Modeling and Simulation Using the Bond Graph Method for the Aerospace Industry

NASA Technical Reports Server (NTRS)

Granda, Jose J.; Montgomery, Raymond C.

2003-01-01

Bond graph modeling was originally developed in the late 1950s by the late Prof. Henry M. Paynter of M.I.T. Prof. Paynter acted well before his time as the main advantage of his creation, other than the modeling insight that it provides and the ability of effectively dealing with Mechatronics, came into fruition only with the recent advent of modern computer technology and the tools derived as a result of it, including symbolic manipulation, MATLAB, and SIMULINK and the Computer Aided Modeling Program (CAMPG). Thus, only recently have these tools been available allowing one to fully utilize the advantages that the bond graph method has to offer. The purpose of this paper is to help fill the knowledge void concerning its use of bond graphs in the aerospace industry. The paper first presents simple examples to serve as a tutorial on bond graphs for those not familiar with the technique. The reader is given the basic understanding needed to appreciate the applications that follow. After that, several aerospace applications are developed such as modeling of an arresting system for aircraft carrier landings, suspension models used for landing gears and multibody dynamics. The paper presents also an update on NASA's progress in modeling the International Space Station (ISS) using bond graph techniques, and an advanced actuation system utilizing shape memory alloys. The later covers the Mechatronics advantages of the bond graph method, applications that simultaneously involves mechanical, hydraulic, thermal, and electrical subsystem modeling.

The Stakeholder Preference for Best Management Practices in the Three Gorges Reservoir Region

NASA Astrophysics Data System (ADS)

Qiu, Jiali; Shen, Zhenyao; Chen, Lei; Xie, Hui; Sun, Chengchun; Huang, Qin

2014-11-01

A qualitative analysis of in-depth interviews with 92 farmers and 42 policy managers in Wuxi County, the Three Gorges Reservoir Region, was conducted to identify stakeholder preferences for alternative best management practices (BMPs) and to determine the factors that affect their acceptance. Policy manager support for most of the practices was relatively stronger than support by farmers, except for the grade stabilization structure (GSS), hillside ditch (HD) and constructed wetland alternative, owing to their perceptions of soil benefits, economic advantages and environmental advantages. Farmers opposed those practices that occupied cultivated lands or changed the conventional planting methods, such as field border, conservation tillage (CT) and contour buffer strips. They tended to accept the BMPs with off-farm pollution reduction, such as GSS, riparian forest buffer and HD, and the BMPs associated with soil benefits, such as nutrient management and Terrace. The result that almost all respondents did not accept CT differed from reports in the existing literature. There is a significant correlation between the acceptance of some BMPs and the townships where the farmers lived ( P ≤ 0.05). The environmental conditions and social factors would affect farmer support for BMPs, including local soil conditions, farming methods, economic income, education level and age. The economic advantages of the BMPs were the main motivation for farmers to accept the practices. Furthermore, intensive education efforts, financial incentives or economic subsidies may promote the adoption of the BMPs in our study area.

Advantages and Pitfalls of Mass Spectrometry Based Metabolome Profiling in Systems Biology.

PubMed

Aretz, Ina; Meierhofer, David

2016-04-27

Mass spectrometry-based metabolome profiling became the method of choice in systems biology approaches and aims to enhance biological understanding of complex biological systems. Genomics, transcriptomics, and proteomics are well established technologies and are commonly used by many scientists. In comparison, metabolomics is an emerging field and has not reached such high-throughput, routine and coverage than other omics technologies. Nevertheless, substantial improvements were achieved during the last years. Integrated data derived from multi-omics approaches will provide a deeper understanding of entire biological systems. Metabolome profiling is mainly hampered by its diversity, variation of metabolite concentration by several orders of magnitude and biological data interpretation. Thus, multiple approaches are required to cover most of the metabolites. No software tool is capable of comprehensively translating all the data into a biologically meaningful context yet. In this review, we discuss the advantages of metabolome profiling and main obstacles limiting progress in systems biology.

Advantages and Pitfalls of Mass Spectrometry Based Metabolome Profiling in Systems Biology

PubMed Central

Aretz, Ina; Meierhofer, David

2016-01-01

Mass spectrometry-based metabolome profiling became the method of choice in systems biology approaches and aims to enhance biological understanding of complex biological systems. Genomics, transcriptomics, and proteomics are well established technologies and are commonly used by many scientists. In comparison, metabolomics is an emerging field and has not reached such high-throughput, routine and coverage than other omics technologies. Nevertheless, substantial improvements were achieved during the last years. Integrated data derived from multi-omics approaches will provide a deeper understanding of entire biological systems. Metabolome profiling is mainly hampered by its diversity, variation of metabolite concentration by several orders of magnitude and biological data interpretation. Thus, multiple approaches are required to cover most of the metabolites. No software tool is capable of comprehensively translating all the data into a biologically meaningful context yet. In this review, we discuss the advantages of metabolome profiling and main obstacles limiting progress in systems biology. PMID:27128910

Ultra-sonic motor for the actuators of space optical communications terminal

NASA Astrophysics Data System (ADS)

Araki, T.; Kobayashi, Y.; Kawashima, N.; Maniwa, K.; Obara, S.; Zakoji, T.; Kubota, A.

2017-02-01

The main advantages of space optical communication technologies compared with RF communications are 1) Wide bandwidth that enables a much higher data rate and 2) Smaller antenna and hardware due to the ultra-short wavelength characteristics. The cost and weight of each spacecraft has been decreasing year by year. Space optical communication technologies, that are being established, have been required to reduce cost and weight recently. The general rotational actuators of spacecraft are magnetic motors. However, it is difficult to reduce it's weight and cost dramatically since magnetic motors include iron core and metal coil. In addition, we do not have the flexibility of magnetic motor's shape. JAXA is interested in optical data relay including LEO-GEO optical communication. In this application, space optical communication equipment must equip rotational actuators as a coarse pointing mechanism. Therefore, the authors have focused on ultra-sonic motors (USM) for the equipment of space optical communication so that we will achieve lower cost, lower weight and a more-flexible-shape of actuators than magnetic motors. In this presentation, the authors propose applications of USM as actuators of space optical communications. USM has been widely used in our life and industry. Usage in industry includes vacuum environments of the semiconductor manufacturing process. So, the authors estimated the usage of USM can be applied to actuators of spacecraft. At first, the authors discuss the advantages and disadvantages of USM compared to traditional magnetic motors. Then, driving performance of USM under vacuum, high and low-temperature conditions are shown. At last, results of life estimation test of USM are discussed.

Leaf phenological characters of main tree species in urban forest of Shenyang.

PubMed

Xu, Sheng; Xu, Wenduo; Chen, Wei; He, Xingyuan; Huang, Yanqing; Wen, Hua

2014-01-01

Plant leaves, as the main photosynthetic organs and the high energy converters among primary producers in terrestrial ecosystems, have attracted significant research attention. Leaf lifespan is an adaptive characteristic formed by plants to obtain the maximum carbon in the long-term adaption process. It determines important functional and structural characteristics exhibited in the environmental adaptation of plants. However, the leaf lifespan and leaf characteristics of urban forests were not studied up to now. By using statistic, linear regression methods and correlation analysis, leaf phenological characters of main tree species in urban forest of Shenyang were observed for five years to obtain the leafing phenology (including leafing start time, end time, and duration), defoliating phenology (including defoliation start time, end time, and duration), and the leaf lifespan of the main tree species. Moreover, the relationships between temperature and leafing phenology, defoliating phenology, and leaf lifespan were analyzed. The timing of leafing differed greatly among species. The early leafing species would have relatively early end of leafing; the longer it took to the end of leafing would have a later time of completed leafing. The timing of defoliation among different species varied significantly, the early defoliation species would have relatively longer duration of defoliation. If the mean temperature rise for 1°C in spring, the time of leafing would experience 5 days earlier in spring. If the mean temperature decline for 1°C, the time of defoliation would experience 3 days delay in autumn. There is significant correlation between leaf longevity and the time of leafing and defoliation. According to correlation analysis and regression analysis, there is significant correlation between temperature and leafing and defoliation phenology. Early leafing species would have a longer life span and consequently have advantage on carbon accumulation compared with later defoliation species.

Synergetic cholesterol-lowering effects of main alkaloids from Rhizoma Coptidis in HepG2 cells and hypercholesterolemia hamsters.

PubMed

Kou, Shuming; Han, Bing; Wang, Yue; Huang, Tao; He, Kai; Han, Yulong; Zhou, Xia; Ye, Xiaoli; Li, Xuegang

2016-04-15

Hyperlipidemia contributes to the progression of cardiovascular diseases. Main alkaloids from Rhizoma Coptidis including berberine (BBR), coptisine (COP), palmatine (PAL), epiberberine (EPI) and jatrorrhizine (JAT), improved dyslipidemia in hypercholesterolemic hamsters to a different degree. In this study, HepG2 cells and hypercholesterolemic hamsters were used to investigate the synergetic cholesterol-lowering efficacy of these five main alkaloids. The cellular lipid and cholesterol accumulation and in HepG2 cells were evaluated by Oil Red O staining and HPLC analysis. LDL receptor, 3-Hydroxy-3-methylglutaryl CoA reductase (HMGCR) and cholesterol 7-alpha-hydroxylase (CYP7A1) that involving cholesterol metabolism in HepG2 cells were measured by qRT-PCR, western blot and immunofluorescence analysis. The serum profiles including total cholesterol (TC), triglyceride (TG), low-density lipoprotein cholesterol (LDL-c) and high-density lipoprotein cholesterol (HDL-c), as well as TC and total bile acids (TBA) of feces in hypercholesterolemic hamsters were also measured. As compared to single alkaloids, the combination of five main alkaloids (COM) reduced the lipid and cholesterol accumulation in HepG2 cells more effectively and performed an advantageous effect on controlling TC, TG, LDL-c and HDL-c in hypercholesterolemic hamsters. More effective reduction of TBA and TC levels in feces of hamsters were achieved after the administration of COM. These effects were derived from the up-regulation of LDL receptor and CYP7A1, as well as HMGCR downregulation. Our results demonstrated that COM showed a synergetic cholesterol-lowering efficacy, which was better than single alkaloids and it might be considered as a potential therapy for hypercholesterolemia. Copyright © 2016 Elsevier Inc. All rights reserved.

Book Catalogs versus Card Catalogs *

PubMed Central

Pizer, Irwin H.

1965-01-01

The development of the library catalog in book form and its abandonment in favor of the card catalog are briefly traced. The advantages and disadvantages of both types of catalogs are enumerated, and several solutions which tried to combine the best features of both are discussed. The present trend back to the book catalog, made possible by recent advances in computer technology, is analyzed, advantages and disadvantages are compared, current examples are illustrated, and finally the computerized catalog is weighed against both the book and card catalog as to main features and practicality. PMID:14271116

Cost aware cache replacement policy in shared last-level cache for hybrid memory based fog computing

NASA Astrophysics Data System (ADS)

Jia, Gangyong; Han, Guangjie; Wang, Hao; Wang, Feng

2018-04-01

Fog computing requires a large main memory capacity to decrease latency and increase the Quality of Service (QoS). However, dynamic random access memory (DRAM), the commonly used random access memory, cannot be included into a fog computing system due to its high consumption of power. In recent years, non-volatile memories (NVM) such as Phase-Change Memory (PCM) and Spin-transfer torque RAM (STT-RAM) with their low power consumption have emerged to replace DRAM. Moreover, the currently proposed hybrid main memory, consisting of both DRAM and NVM, have shown promising advantages in terms of scalability and power consumption. However, the drawbacks of NVM, such as long read/write latency give rise to potential problems leading to asymmetric cache misses in the hybrid main memory. Current last level cache (LLC) policies are based on the unified miss cost, and result in poor performance in LLC and add to the cost of using NVM. In order to minimize the cache miss cost in the hybrid main memory, we propose a cost aware cache replacement policy (CACRP) that reduces the number of cache misses from NVM and improves the cache performance for a hybrid memory system. Experimental results show that our CACRP behaves better in LLC performance, improving performance up to 43.6% (15.5% on average) compared to LRU.

[Reconstruction in plastic surgery using osmotic tissue expanders].

PubMed

Gronovich, Yoav; Binenboym, Rami; Retchkiman, Meir; Eizenman, Nirit; Lotan, Adi; Stuchiner, Barak; Tuchman, Izhak

2015-03-01

Tissue expander is a major reconstructive modality. Its main disadvantages include: long and inconvenient period of inflation with temporary deformity of the surrounding tissue. Osmotic expander was developed in order to eliminate some of these limitations. It is a self-filling device which absorbs fluids in order to achieve tissue expansion faster. We present our experience with 28 consecutive cases of tissue reconstruction using osmotic expanders. We wish to emphasize the main advantages and limitations of this device. The present study was launched in May 2008, until April 2014, for twenty eight patients, median age 26 years with reconstructions using an osmotic expander (total of 35 expanders). The reasons for using tissue expander included large congenital nevi (75%) and scars. In all of the cases, the operative and post-operative management was uneventful. During the expansion period, there were 2 outpatient clinical visits. The average expansion time was 9 weeks. In 11% (three patients) there was partial extrusion of the expander. In all other cases there were no complications and the final aesthetic results were satisfying. Osmotic expander is an advanced modality for tissue reconstruction. The final shape and size are precisely predictable. Its initial small size allows for a small surgical incision and short overall operating time. The expansion period is shorter and more convenient for the patient. Its main disadvantage includes the inability to control the filling rate and the need to remove the expander in case of damage to the overlying tissue. Osmotic expander is a reliable tool for tissue expansion. It allows for a satisfying aesthetic result in a shorter period of time and with less inconvenience to the patient.

Structure Design Approach and Technology Selection for Next Generation European Launchers

NASA Astrophysics Data System (ADS)

Baiocco, P.; Ramusat, G.; Kauffmann, J.; Jaredson, D.; Bouilly, Th.; Lavelle, F.; Louaas, E.

2012-07-01

In the framework of the next generation launchers activity at ESA, a top-down and a bottom-up approach has been performed for the alternative conception and promising technologies of NGL sub-assemblies and sub-systems. The top-down approach consisted in looking for system-driven design solutions and the bottom-up in the proposal of design solutions taking to substantial advantages for the system. The main investigations have been focused on structures and technologies tight to structures and interfaces. Specifications coming from a preliminary system design have been used in order to permit sub-system design with the goal to find the major advantage for the overall launch system. In this respect selection criteria have been identified and among these a specific evaluation of the payload mass over recurring cost advantage has been evaluated. The development cost, recurring cost and operational aspects have been considered as competitiveness factors for the identification of the most interesting solutions. The TRL/IRL has been assessed and a preliminary development plan has been identified. This approach is dedicated to reference NGL architectures, but alternative architectures have been investigated in order to assess their interest in terms of competitiveness factors and study of other technologies. This paper deals mainly with metallic and composite structures owing to sub-systems or sub-assemblies proposed for the NGL. The major sub-systems and structures analysed are the engine thrust frame (ETF), inter stage structures (ISS), cryogenic propellant tanks, feeding lines and attachments, pressurisation systems and fairing. The paper provides an overview of the main results of this investigation and the potential benefit it can provide.

Molecular genetic techniques for gene manipulation in Candida albicans.

PubMed

Xu, Qiu-Rong; Yan, Lan; Lv, Quan-Zhen; Zhou, Mi; Sui, Xue; Cao, Yong-Bing; Jiang, Yuan-Ying

2014-05-15

Candida albicans is one of the most common fungal pathogen in humans due to its high frequency as an opportunistic and pathogenic fungus causing superficial as well as invasive infections in immunocompromised patients. An understanding of gene function in C. albicans is necessary to study the molecular basis of its pathogenesis, virulence and drug resistance. Several manipulation techniques have been used for investigation of gene function in C. albicans, including gene disruption, controlled gene expression, protein tagging, gene reintegration, and overexpression. In this review, the main cassettes containing selectable markers used for gene manipulation in C. albicans are summarized; the advantages and limitations of these cassettes are discussed concerning the influences on the target gene expression and the virulence of the mutant strains.

Fluorescent microplate assay method for high-throughput detection of lipase transesterification activity.

PubMed

Zheng, Jianyong; Wei, Wei; Lan, Xing; Zhang, Yinjun; Wang, Zhao

2018-05-15

This study describes a sensitive and fluorescent microplate assay method to detect lipase transesterification activity. Lipase-catalyzed transesterification between butyryl 4-methyl umbelliferone (Bu-4-Mu) and methanol in tert-butanol was selected as the model reaction. The release of 4-methylumbelliferone (4-Mu) in the reaction was determined by detecting the fluorescence intensity at λ ex 330 nm and λ em 390 nm. Several lipases were used to investigate the accuracy and efficiency of the proposed method. Apparent Michaelis constant (Km) was calculated for transesterification between Bu-4-Mu and methanol by the lipases. The main advantages of the assay method include high sensitivity, inexpensive reagents, and simple detection process. Copyright © 2018 Elsevier Inc. All rights reserved.

Design techniques for low-voltage analog integrated circuits

NASA Astrophysics Data System (ADS)

Rakús, Matej; Stopjaková, Viera; Arbet, Daniel

2017-08-01

In this paper, a review and analysis of different design techniques for (ultra) low-voltage integrated circuits (IC) are performed. This analysis shows that the most suitable design methods for low-voltage analog IC design in a standard CMOS process include techniques using bulk-driven MOS transistors, dynamic threshold MOS transistors and MOS transistors operating in weak or moderate inversion regions. The main advantage of such techniques is that there is no need for any modification of standard CMOS structure or process. Basic circuit building blocks like differential amplifiers or current mirrors designed using these approaches are able to operate with the power supply voltage of 600 mV (or even lower), which is the key feature towards integrated systems for modern portable applications.

A direct and fast method to monitor lipid oxidation progress in model fatty acid methyl esters by high-performance size-exclusion chromatography.

PubMed

Márquez-Ruiz, G; Holgado, F; García-Martínez, M C; Dobarganes, M C

2007-09-21

A new method based on high-performance size-exclusion chromatography (HPSEC) is proposed to quantitate primary and secondary oxidation compounds in model fatty acid methyl esters (FAMEs). The method consists on simply injecting an aliquot sample in HPSEC, without preliminary isolation procedures neither addition of standard internal. Four groups of compounds can be quantified, namely, unoxidised FAME, oxidised FAME monomers including hydroperoxides, FAME dimers and FAME polymers. Results showed high repeatability and sensitivity, and substantial advantages versus determination of residual substrate by gas-liquid chromatography. Applicability of the method is shown through selected data obtained by numerous oxidation experiments on pure FAME, mainly methyl linoleate, at ambient and moderate temperatures.

[The current role of warfarin].

PubMed

Michalcová, Jana; Buliková, Alena; Zavřelová, Jiřina; Prudková, Marie; Penka, Miroslav

Well-managed warfarin therapy remains an important method of anticoagulation in the 21st century, despite the introduction of new antithrombotics into the clinical practice. The main advantages of warfarin are decades of treatment experience, the possibility to monitor its anticoagulant effect using the INR and the last, but not least, the low cost. Currently, approximately 75 % of anticoagulated patients in the Czech Republic are treated with warfarin and warfarin remains the only option for oral anticoagulant therapy in certain clinical conditions (particularly in patients with valvular atrial fibrillation or mechanical heart valves). For physicians across specialties it is still indispensable to master the basics of safe and effective warfarin therapy, including the management of treatment complications.Key words: anticoagulant therapy - INR - thrombosis - warfarin.

Solid-state single-photon emitters

NASA Astrophysics Data System (ADS)

Aharonovich, Igor; Englund, Dirk; Toth, Milos

2016-10-01

Single-photon emitters play an important role in many leading quantum technologies. There is still no 'ideal' on-demand single-photon emitter, but a plethora of promising material systems have been developed, and several have transitioned from proof-of-concept to engineering efforts with steadily improving performance. Here, we review recent progress in the race towards true single-photon emitters required for a range of quantum information processing applications. We focus on solid-state systems including quantum dots, defects in solids, two-dimensional hosts and carbon nanotubes, as these are well positioned to benefit from recent breakthroughs in nanofabrication and materials growth techniques. We consider the main challenges and key advantages of each platform, with a focus on scalable on-chip integration and fabrication of identical sources on photonic circuits.

Mass Media’s Perspective on the Challenges of Information and Communication Technology (ICT) in Indonesia

NASA Astrophysics Data System (ADS)

Junaidi

2017-12-01

This study investigated the challenges of Information and Communication Technology (ICT) in Indonesia based on mass media’s perspective. The challenges of ICT on mass media’s perspective are very complex. Some of these challenges include the consideration of the advantages and disadvantages of ICT, threats to the unity of the country, cultural problems, regulation, business competition among operators, Pokemon Go booming, the existence of social media which triggers hostility between people and the increasing rate of the interconnection cost. Among the main reasons to this phenomenon is a need of massive investment to build the infrastructures. This study used Robert N. Entman framing model to analyze the headlines of Majalah ICT (an ICT magazine).

Compressive Sensing Image Sensors-Hardware Implementation

PubMed Central

Dadkhah, Mohammadreza; Deen, M. Jamal; Shirani, Shahram

2013-01-01

The compressive sensing (CS) paradigm uses simultaneous sensing and compression to provide an efficient image acquisition technique. The main advantages of the CS method include high resolution imaging using low resolution sensor arrays and faster image acquisition. Since the imaging philosophy in CS imagers is different from conventional imaging systems, new physical structures have been developed for cameras that use the CS technique. In this paper, a review of different hardware implementations of CS encoding in optical and electrical domains is presented. Considering the recent advances in CMOS (complementary metal–oxide–semiconductor) technologies and the feasibility of performing on-chip signal processing, important practical issues in the implementation of CS in CMOS sensors are emphasized. In addition, the CS coding for video capture is discussed. PMID:23584123

[Cause of death related to medical disputes in Yancheng area: a study of 60 autopsy cases].

PubMed

Peng, Ming-Qi; Chen, Rong-Yu; Zhou, Lan; Zhang, Kai-Qiao; Shi, Jian-Song

2014-04-01

To summarize the pattern and main characteristics of fatal cases related to medical disputes in Yancheng area. Sixty fatal cases of medical disputes were retrospectively analyzed to elucidate the annual incidence, characters of distribution of hospitals, gender and age of the decedents, types of diseases, and cause of death. Among 60 fatal cases, most cases happened in health clinics of county, township and village. There were more males than females. The major medical specialties involved included internal medicine, surgery, gynecology and pediatrics, with the internal medicine specialty having the highest incidence. Police institutions have advantages in investigation of these cases in their jurisdictions, which could enhance the ability of local medicolegal examination.

Introducing a New Software for Geodetic Analysis

NASA Astrophysics Data System (ADS)

Hjelle, Geir Arne; Dähnn, Michael; Fausk, Ingrid; Kirkvik, Ann-Silje; Mysen, Eirik

2017-04-01

At the Norwegian Mapping Authority, we are currently developing Where, a new software for geodetic analysis. Where is built on our experiences with the Geosat software, and will be able to analyse and combine data from VLBI, SLR, GNSS and DORIS. The software is mainly written in Python which has proved very fruitful. The code is quick to write and the architecture is easily extendable and maintainable, while at the same time taking advantage of well-tested code like the SOFA and IERS libraries. This presentation will show some of the current capabilities of Where, including benchmarks against other software packages, and outline our plans for further progress. In addition we will report on some investigations we have done experimenting with alternative weighting strategies for VLBI.

Focal therapy as primary treatment for localized prostate cancer: definition, needs and future.

PubMed

Ouzzane, Adil; Betrouni, Nacim; Valerio, Massimo; Rastinehad, Ardeshir; Colin, Pierre; Ploussard, Guillaume

2017-04-01

Focal therapy (FT) may offer a promising treatment option in the field of low to intermediate risk localized prostate cancer. The aim of this concept is to combine minimal morbidity with cancer control as well as maintain the possibility of retreatment. Recent advances in MRI and targeted biopsy has improved the diagnostic pathway of prostate cancer and increased the interest in FT. However, before implementation of FT in routine clinical practice, several challenges are still to overcome including patient selection, treatment planning, post-therapy monitoring and definition of oncologic outcome surrogates. In this article, relevant questions regarding the key steps of FT are critically discussed and the main available energy modalities are analyzed taking into account their advantages and unmet needs.

High-sensitivity fiber optic acoustic sensors

NASA Astrophysics Data System (ADS)

Lu, Ping; Liu, Deming; Liao, Hao

2016-11-01

Due to the overwhelming advantages compared with traditional electronicsensors, fiber-optic acoustic sensors have arisen enormous interest in multiple disciplines. In this paper we present the recent research achievements of our group on fiber-optic acoustic sensors. The main point of our research is high sensitivity interferometric acoustic sensors, including Michelson, Sagnac, and Fabry-Pérot interferometers. In addition, some advanced technologies have been proposed for acoustic or acoustic pressure sensing such as single-mode/multimode fiber coupler, dual FBGs and multi-longitudinal mode fiber laser based acoustic sensors. Moreover, our attention we have also been paid on signal demodulation schemes. The intensity-based quadrature point (Q-point) demodulation, two-wavelength quadrature demodulation and symmetric 3×3 coupler methodare discussed and compared in this paper.

Qualitative study on nutritional knowledge of primary-school children and mothers in Tehran.

PubMed

Abdollahi, M; Amini, M; Kianfar, H; Dadkhah-Piraghag, M; Eslami-Amirabadi, M; Zoghi, T; Assasi, N; Kalantari, N

2008-01-01

The nutritional education demands of primary-school children in Tehran were evaluated in a qualitative study, through 20 focus group discussions, 16 for children and 4 for mothers, among 128 children aged 6-11 years and 32 mothers in 8 primary schools in Tehran. Children knew about the advantages of different food groups, including helping digestion, growth and increasing intelligence. They obtained their knowledge mainly from their parents and television, as well as books, teachers and friends. Mothers thought the sources that had most effect on children's nutritional knowledge were television advertisements, parents and classmates. Most of the children claimed that they preferred to learn about nutrition from their parents and television, e.g. children's programmes and advertisements.

Computational structural mechanics for engine structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1989-01-01

The computational structural mechanics (CSM) program at Lewis encompasses: (1) fundamental aspects for formulating and solving structural mechanics problems, and (2) development of integrated software systems to computationally simulate the performance/durability/life of engine structures. It is structured to mainly supplement, complement, and whenever possible replace, costly experimental efforts which are unavoidable during engineering research and development programs. Specific objectives include: investigate unique advantages of parallel and multiprocesses for: reformulating/solving structural mechanics and formulating/solving multidisciplinary mechanics and develop integrated structural system computational simulators for: predicting structural performances, evaluating newly developed methods, and for identifying and prioritizing improved/missing methods needed. Herein the CSM program is summarized with emphasis on the Engine Structures Computational Simulator (ESCS). Typical results obtained using ESCS are described to illustrate its versatility.

Photogrammetric techniques for aerospace applications

NASA Astrophysics Data System (ADS)

Liu, Tianshu; Burner, Alpheus W.; Jones, Thomas W.; Barrows, Danny A.

2012-10-01

Photogrammetric techniques have been used for measuring the important physical quantities in both ground and flight testing including aeroelastic deformation, attitude, position, shape and dynamics of objects such as wind tunnel models, flight vehicles, rotating blades and large space structures. The distinct advantage of photogrammetric measurement is that it is a non-contact, global measurement technique. Although the general principles of photogrammetry are well known particularly in topographic and aerial survey, photogrammetric techniques require special adaptation for aerospace applications. This review provides a comprehensive and systematic summary of photogrammetric techniques for aerospace applications based on diverse sources. It is useful mainly for aerospace engineers who want to use photogrammetric techniques, but it also gives a general introduction for photogrammetrists and computer vision scientists to new applications.

A Novel Interactive Exoskeletal Robot for Overground Locomotion Studies in Rats.

PubMed

Song, Yun Seong; Hogan, Neville

2015-07-01

This paper introduces a newly developed apparatus, Iron Rat, for locomotion research in rodents. Its main purpose is to allow maximal freedom of voluntary overground movement of the animal while providing forceful interaction to the hindlimbs. Advantages and challenges of the proposed exoskeletal apparatus over other existing designs are discussed. Design and implementation challenges are presented and discussed, emphasizing their implications for free, voluntary movement of the animal. A live-animal experiment was conducted to assess the design. Unconstrained natural movement of the animal was compared with its movement with the exoskeletal module attached. The compact design and back-drivable implementation of this apparatus will allow novel experimental manipulations that may include forceful yet compliant dynamic interaction with the animal's overground locomotion.

Use of computational fluid dynamics in respiratory medicine.

PubMed

Fernández Tena, Ana; Casan Clarà, Pere

2015-06-01

Computational Fluid Dynamics (CFD) is a computer-based tool for simulating fluid movement. The main advantages of CFD over other fluid mechanics studies include: substantial savings in time and cost, the analysis of systems or conditions that are very difficult to simulate experimentally (as is the case of the airways), and a practically unlimited level of detail. We used the Ansys-Fluent CFD program to develop a conducting airway model to simulate different inspiratory flow rates and the deposition of inhaled particles of varying diameters, obtaining results consistent with those reported in the literature using other procedures. We hope this approach will enable clinicians to further individualize the treatment of different respiratory diseases. Copyright © 2014 SEPAR. Published by Elsevier Espana. All rights reserved.

Design strategies for the International Space University's variable gravity research facility

NASA Technical Reports Server (NTRS)

Bailey, Sheila G.; Chiaramonte, Francis P.; Davidian, Kenneth J.

1990-01-01

A variable gravity research facility named 'Newton' was designed by 58 students from 13 countries at the International Space University's 1989 summer session at the Universite Louis Pasteur, Strasbourge, France. The project was comprehensive in scope, including a political and legal foundation for international cooperation, development and financing; technical, science and engineering issues; architectural design; plausible schedules; and operations, crew issues and maintenance. Since log-term exposure to zero gravity is known to be harmful to the human body, the main goal was to design a unique variable gravity research facility which would find a practical solution to this problem, permitting a manned mission to Mars. The facility would not duplicate other space-based facilities and would provide the flexibility for examining a number of gravity levels, including lunar and Martian gravities. Major design alternatives included a truss versus a tether based system which also involved the question of docking while spinning or despinning to dock. These design issues are described. The relative advantages or disadvantages are discussed, including comments on the necessary research and technology development required for each.

Is robotic sacrocolpopexy a marketing gimmick or a technological advancement?

PubMed

Kim, Ja-Hong; Anger, Jennifer T

2010-07-01

Robot-assisted laparoscopic sacrocolpopexy (RALS) is a new surgical technique for the treatment of symptomatic vaginal vault prolapse that is rapidly gaining popularity among both urologists and gynecologists. This article will summarize the available published data to assess the potential advantages and disadvantages of this new procedure and its current role in female pelvic floor reconstruction. The literature on RALS is limited mainly to single-institution retrospective studies, which suggest minimal morbidity, technical feasibility, and short-term efficacy comparable to open abdominal sacrocolpopexy. What remains uncertain is whether this approach will be superior to the other established minimally invasive transvaginal and laparoscopic approaches in terms of subjective and objective outcomes and quality of life. Other relevant issues, such as overall cost-effectiveness and extended application for multicompartment defects and uterine-sparing procedures, remain largely unexplored. The use of RALS will likely continue to expand secondary to increased access and the popularity of the robotic apparatus among both surgeons and patients. Well designed large randomized multicenter comparative studies based on validated measurement instruments are needed to evaluate its advantage over conventional approaches, including open abdominal sacrocolpopexy and various transvaginal and laparoscopic techniques.

In situ Raman mapping of art objects

PubMed Central

Brondeel, Ph.; Moens, L.; Vandenabeele, P.

2016-01-01

Raman spectroscopy has grown to be one of the techniques of interest for the investigation of art objects. The approach has several advantageous properties, and the non-destructive character of the technique allowed it to be used for in situ investigations. However, compared with laboratory approaches, it would be useful to take advantage of the small spectral footprint of the technique, and use Raman spectroscopy to study the spatial distribution of different compounds. In this work, an in situ Raman mapping system is developed to be able to relate chemical information with its spatial distribution. Challenges for the development are discussed, including the need for stable positioning and proper data treatment. To avoid focusing problems, nineteenth century porcelain cards are used to test the system. This work focuses mainly on the post-processing of the large dataset which consists of four steps: (i) importing the data into the software; (ii) visualization of the dataset; (iii) extraction of the variables; and (iv) creation of a Raman image. It is shown that despite the challenging task of the development of the full in situ Raman mapping system, the first steps are very promising. This article is part of the themed issue ‘Raman spectroscopy in art and archaeology’. PMID:27799424

Transperineal Ultrasound as a Tool to Plan Surgical Strategies in Pediatric Urology: Back to the Future?

PubMed

de Jesus, Lisieux Eyer; Fazecas, Tatiana; Ribeiro, Bianca G; Dekermacher, Samuel

2017-06-01

To demonstrate the usefulness and advantages of transperineal ultrasound (TPUS) on planning the surgical tactics to treat childhood pelviperineal disease (CPPD). A cohort of CPPD is reviewed to provide a pictorial review of TPUS as imaging method variety of CPPD. Other imaging methods are compared with TPUS. TPUS studies of patients showing different conditions on the spectrum of pelviperineal malformation are shown in detail (pictorial review, graphically shown-see figures in the article and as supplementary material), highlighting the advantages of the method and comparing TPUS findings with other imaging techniques. Magnetic resonance imaging, contrast genitograms, voiding cystourethrography, and genital or urologic endoscopy have some important disadvantages, especially radiation exposure, high cost, not easily available equipment, and the need of general anesthesia or deep sedation in children. TPUS is easily available, including in impoverished environments, portable, painless, reproducible, inexpensive, and capable of providing detailed and specific information about pelviperineal malformation with accuracy. Data provided by TPUS are comparable with other imaging techniques (Table 1). Its main disadvantage is the dependency on the expertise of the operator to obtain high-quality, well-interpreted images. Copyright © 2017 Elsevier Inc. All rights reserved.

Effect of childhood socioeconomic conditions on cancer onset in later life: an ambidirectional cohort study.

PubMed

van der Linden, Bernadette W A; Courvoisier, Delphine S; Cheval, Boris; Sieber, Stefan; Bracke, Piet; Guessous, Idris; Burton-Jeangros, Claudine; Kliegel, Matthias; Cullati, Stéphane

2018-05-17

Living in low socioeconomic conditions during childhood is associated with poor health outcomes in later life. Whether this link also applies to cancer is unclear. We examined whether childhood socioeconomic conditions (CSCs) are associated with cancer risk in later life and whether this effect remained after adjusting for adulthood socioeconomic conditions (ASCs). Data for 26,431 individuals ≥ 50 years old included in SHARE were analysed. CSCs were constructed by using indicators of living conditions at age 10. ASC indicators were education, main occupation, and household income. Gender-stratified associations of CSCs with cancer onset (overall and by site) were assessed by Cox regression. In total, 2852 individuals were diagnosed with cancer. For both men and women, risk of overall cancer was increased for advantaged CSCs and remained so after adjusting for ASCs (hazard ratio = 1.36, 95% CI 1.10, 1.63, and 1.70, 95% CI 1.41, 2.07). Advantaged CSCs are associated with an increased risk of overall cancer at older age, but results vary by cancer sites and sex. Participation in cancer screening or exposure to risk factors may differ by social conditions.

Transient behavior of redox flow battery connected to circuit based on global phase structure

NASA Astrophysics Data System (ADS)

Mannari, Toko; Hikihara, Takashi

A Redox Flow Battery (RFB) is one of the promising energy storage systems in power grid. An RFB has many advantages such as a quick response, a large capacity, and a scalability. Due to these advantages, an RFB can operate in mixed time scale. Actually, it has been demonstrated that an RFB can be used for load leveling, compensating sag, and smoothing the output of the renewable sources. An analysis on transient behaviors of an RFB is a key issue for these applications. An RFB is governed by electrical, chemical, and fluid dynamics. The hybrid structure makes the analysis difficult. To analyze transient behaviors of an RFB, the exact model is necessary. In this paper, we focus on a change in a concentration of ions in the electrolyte, and simulate the change with a model which is mainly based on chemical kinetics. The simulation results introduces transient behaviors of an RFB in a response to a load variation. There are found three kinds of typical transient behaviors including oscillations. As results, it is clarified that the complex transient behaviors, due to slow and fast dynamics in the system, arise by the quick response to load.

Fungal diseases: could nanostructured drug delivery systems be a novel paradigm for therapy?

PubMed Central

Voltan, Aline Raquel; Quindós, Guillermo; Alarcón, Kaila P Medina; Fusco-Almeida, Ana Marisa; Mendes-Giannini, Maria José Soares; Chorilli, Marlus

2016-01-01

Invasive mycoses are a major problem for immunocompromised individuals and patients in intensive care units. Morbidity and mortality rates of these infections are high because of late diagnosis and delayed treatment. Moreover, the number of available antifungal agents is low, and there are problems with toxicity and resistance. Alternatives for treating invasive fungal infections are necessary. Nanostructured systems could be excellent carriers for antifungal drugs, reducing toxicity and targeting their action. The use of nanostructured systems for antifungal therapy began in the 1990s, with the appearance of lipid formulations of amphotericin B. This review encompasses different antifungal drug delivery systems, such as liposomes, carriers based on solid lipids and nanostructure lipids, polymeric nanoparticles, dendrimers, and others. All these delivery systems have advantages and disadvantages. Main advantages are the improvement in the antifungal properties, such as bioavailability, reduction in toxicity, and target tissue, which facilitates innovative therapeutic techniques. Conversely, a major disadvantage is the high cost of production. In the near future, the use of nanosystems for drug delivery strategies can be used for delivering peptides, including mucoadhesive systems for the treatment of oral and vaginal candidiasis. PMID:27540288

Public Lecture

ScienceCinema

None

2017-12-09

An outreach activity is being organized by the Turkish community at CERN, on 5 June 2010 at CERN Main Auditorium. The activity consists of several talks that will take 1.5h in total. The main goal of the activity will be describing the CERN based activities and experiments as well as stimulating the public's attention to the science related topics. We believe the wide communication of the event has certain advantages especially for the proceeding membership process of Turkey.

Microdebrider-assisted uvulopalatoplasty.

PubMed

Tarabichi, M

1998-07-01

This report describes 3 years' experience with the microdebrider as a safe and reasonable alternative to CO2 laser for uvulopalatoplasty. The cost and compact size of the equipment, as well as the ease of surgery, are the main advantages for microdebrider-assisted surgery.

Online platforms to teach Nutrition Education to children: a non-systematic review.

PubMed

Domínguez Rodríguez, Alejandro; Cebolla Marti, Ausiàs Josep; Oliver-Gasch, Elia; Baños-Rivera, Rosa María

2016-11-29

Childhood obesity is now considered a worldwide problem. Nutrition Education (NE) has been identified as a key factor in preventing overweight and obesity in children. In recent years, there has been an increase in the interest in innovative ways to teach this knowledge to children, mainly through the use of the Internet. Review and analyze the available evidence about programs focused on NE for children through the use of the Internet. Three different ways were found to deliver NE over the Internet to children: platforms designed to communicate with other peers or professionals; platforms designed to provide NE through the contents included in the web tool; and platforms designed to provide NE through the contents included in the web tool and automated feedback. Most of these programs were effective in achieving the objectives established. Although the use of Internet platforms to teach NE to children has been shown to be effective, the amount of evidence is still scarce. Some of the main advantages the Internet provides are: the opportunity to put the children in contact with education and health professionals; children can keep a record of the food consumed; and it is a more attractive and interesting way for children to learn NE, compared to traditional methods.

The SURFEXv7.2 land and ocean surface platform for coupled or offline simulation of earth surface variables and fluxes

NASA Astrophysics Data System (ADS)

Masson, V.; Le Moigne, P.; Martin, E.; Faroux, S.; Alias, A.; Alkama, R.; Belamari, S.; Barbu, A.; Boone, A.; Bouyssel, F.; Brousseau, P.; Brun, E.; Calvet, J.-C.; Carrer, D.; Decharme, B.; Delire, C.; Donier, S.; Essaouini, K.; Gibelin, A.-L.; Giordani, H.; Habets, F.; Jidane, M.; Kerdraon, G.; Kourzeneva, E.; Lafaysse, M.; Lafont, S.; Lebeaupin Brossier, C.; Lemonsu, A.; Mahfouf, J.-F.; Marguinaud, P.; Mokhtari, M.; Morin, S.; Pigeon, G.; Salgado, R.; Seity, Y.; Taillefer, F.; Tanguy, G.; Tulet, P.; Vincendon, B.; Vionnet, V.; Voldoire, A.

2013-07-01

SURFEX is a new externalized land and ocean surface platform that describes the surface fluxes and the evolution of four types of surfaces: nature, town, inland water and ocean. It is mostly based on pre-existing, well-validated scientific models that are continuously improved. The motivation for the building of SURFEX is to use strictly identical scientific models in a high range of applications in order to mutualise the research and development efforts. SURFEX can be run in offline mode (0-D or 2-D runs) or in coupled mode (from mesoscale models to numerical weather prediction and climate models). An assimilation mode is included for numerical weather prediction and monitoring. In addition to momentum, heat and water fluxes, SURFEX is able to simulate fluxes of carbon dioxide, chemical species, continental aerosols, sea salt and snow particles. The main principles of the organisation of the surface are described first. Then, a survey is made of the scientific module (including the coupling strategy). Finally, the main applications of the code are summarised. The validation work undertaken shows that replacing the pre-existing surface models by SURFEX in these applications is usually associated with improved skill, as the numerous scientific developments contained in this community code are used to good advantage.

Treatments of asbestos containing wastes.

PubMed

Spasiano, D; Pirozzi, F

2017-12-15

Since the second half of the twentieth century, many studies have indicated inhalation of asbestos fibers as the main cause of deadly diseases including fibrosis and cancer. Consequently, since the beginning of the 80s, many countries started banning production and use of asbestos containing products (ACP), although still present in private and public buildings. Due to some extraordinary catastrophic events and/or the aging of these products, people's health and environmental risk associated with the inhalation of asbestos fibers keeps being high even in those countries where it was banned. For these reasons, many communities are developing plans for an environmental and sanitary safe asbestos removal and management. Asbestos containing wastes (ACW) are usually disposed in controlled landfills, but this practice does not definitively eliminate the problems related with asbestos fiber release and conflicts with the ideas of sustainable land use, recycling, and closing material cycles. Consequently, many scientific papers and patents proposed physical, chemical, and biological treatments aimed to the detoxification of ACW (or the reduction of their health effects) and looking for the adoption of technologies, which allow the reuse of the end-products. By including recent relevant bibliography, this report summarizes the status of the most important and innovative treatments of ACW, providing main operating parameters, advantages, and disadvantages. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bayesian GGE biplot models applied to maize multi-environments trials.

PubMed

de Oliveira, L A; da Silva, C P; Nuvunga, J J; da Silva, A Q; Balestre, M

2016-06-17

The additive main effects and multiplicative interaction (AMMI) and the genotype main effects and genotype x environment interaction (GGE) models stand out among the linear-bilinear models used in genotype x environment interaction studies. Despite the advantages of their use to describe genotype x environment (AMMI) or genotype and genotype x environment (GGE) interactions, these methods have known limitations that are inherent to fixed effects models, including difficulty in treating variance heterogeneity and missing data. Traditional biplots include no measure of uncertainty regarding the principal components. The present study aimed to apply the Bayesian approach to GGE biplot models and assess the implications for selecting stable and adapted genotypes. Our results demonstrated that the Bayesian approach applied to GGE models with non-informative priors was consistent with the traditional GGE biplot analysis, although the credible region incorporated into the biplot enabled distinguishing, based on probability, the performance of genotypes, and their relationships with the environments in the biplot. Those regions also enabled the identification of groups of genotypes and environments with similar effects in terms of adaptability and stability. The relative position of genotypes and environments in biplots is highly affected by the experimental accuracy. Thus, incorporation of uncertainty in biplots is a key tool for breeders to make decisions regarding stability selection and adaptability and the definition of mega-environments.

[The problems of cataract surgery and intraocular correction: Russian school achievements and modern trends].

PubMed

Maliugin, B E; Linnik, L F; Egorova, E V; Kopaeva, V G; Tolchinskaia, A I

2007-01-01

The development of the safest and, at the same time, efficient methods of cataract surgery, is not only a topical task of medical science and practice, but also, taking the demographic situation into account, a solution to a social problem. The article describes the main achievements of academician S. N. Fyodorov's school in the field of cataract surgery with intraocular lense (IOL) implantation. Special attention is paid to the key components of cataract extraction technique named "small incision surgery", which is based upon the use of ultrasmall surgical approaches with self-sealing ability and no need for suturing. The main advantages and disadvantages of various types of cataract lense fragmentation, including ultrasound emulsification, mechanic and hydraulic fragmentation, and laser destruction, are described. Topical issues concerning cataract extraction technique under the conditions of complicating ophthalmopathology including the weakness of ciliary zonule system, high-degree myopia, glaucoma, pseudoexfoliative syndrome, small pupil, past injuries and eye surgery, are outlined. The paper also reflects a new qualitative step in the development of intraocular aphakia correction technique under modern conditions. Basic requirements to design parameters and IOL materials are determined from the position of reestablishing the accommodative function and fine visual functions. Ways of IOL design improvement are described especially for their application in non-standard and complicated cases.

Some Suggested Advantages and Disadvantages of Collective Bargaining. Special Report No. 1.

ERIC Educational Resources Information Center

Angell, George W.

This report reviews briefly some advantages and disadvantages of collective bargaining in higher education. Advantages discussed include: efficiency, equality of power, legal force, impasse resolution, communication, understanding the institution, resolution of individual problems, definition of policy, rights guarantee, faculty compensation,…

Comparison of the home advantage in nine different professional team sports in Spain.

PubMed

Gómez, Miguel A; Pollard, Richard; Luis-Pascual, Juan-Carlos

2011-08-01

Home advantage is a well-established phenomenon in many sports. The present study is unique in that it includes different sports analysed in the same country, at the same level of competition, and over the same time period. Nine team sports from Spain were included: baseball, basketball, handball, indoor soccer, roller hockey, rugby, soccer, volleyball, and water polo. Data for five seasons (2005-2006 to 2009-2010) were obtained, totaling 9,472 games. The results confirmed the existence of home advantage in all nine sports. There was a statistically significant difference between the sports; home advantage was highest in rugby (67.0%), and lowest in volleyball (55.7%), water polo (56.2%), and roller hockey (58.3%). The design of the study controlled for some of the likely causes of home advantage, and the results suggested that the high home advantage for rugby was likely a reflection of the continuous, aggressive, and intense nature of the sport.

A patient post hoc perspective on advantages and disadvantages of blended cognitive behaviour therapy for depression: A qualitative content analysis.

PubMed

Urech, Antoine; Krieger, Tobias; Möseneder, Laura; Biaggi, Adriana; Vincent, Alessia; Poppe, Christine; Meyer, Björn; Riper, Heleen; Berger, Thomas

2018-01-31

Blended cognitive behavioural therapy (bCBT), which combines face-to-face (FtF), and internet-based cognitive behavioural therapy (iCBT), may be a particularly promising approach, but little is known about the effectiveness and patients' subjective evaluations of the bCBT format. The aim of this qualitative study is to explore perceived advantages and disadvantages of bCBT from the patients' perspective in specialized mental health care. Semi-structured interviews were conducted with 15 patients suffering from major depression who underwent treatment in a bCBT format. The interview data were processed by means of a qualitative content analysis. The content analysis generated 18 advantages and 15 disadvantages which were grouped into 6 main topics. In general, bCBT was perceived as purposive and effective for treating depression. The patients perceived the combined treatment as complementary and emphasized the advantage of the constant availability of the online programme. Furthermore, a segment analysis revealed that patients reported different advantages and disadvantages of bCBT as a function of the severity of their depressive episode. The findings of the present study reveal advantages and disadvantages of bCBT, which should be taken into account in the further implementation of this new treatment format.

Memory for emotional words: The role of semantic relatedness, encoding task and affective valence.

PubMed

Ferré, Pilar; Fraga, Isabel; Comesaña, Montserrat; Sánchez-Casas, Rosa

2015-01-01

Emotional stimuli have been repeatedly demonstrated to be better remembered than neutral ones. The aim of the present study was to test whether this advantage in memory is mainly produced by the affective content of the stimuli or it can be rather accounted for by factors such as semantic relatedness or type of encoding task. The valence of the stimuli (positive, negative and neutral words that could be either semantically related or unrelated) as well as the type of encoding task (focused on either familiarity or emotionality) was manipulated. The results revealed an advantage in memory for emotional words (either positive or negative) regardless of semantic relatedness. Importantly, this advantage was modulated by the encoding task, as it was reliable only in the task which focused on emotionality. These findings suggest that congruity with the dimension attended at encoding might contribute to the superiority in memory for emotional words, thus offering us a more complex picture of the underlying mechanisms behind the advantage for emotional information in memory.

Explaining Asian Americans’ academic advantage over whites

PubMed Central

Hsin, Amy; Xie, Yu

2014-01-01

The superior academic achievement of Asian Americans is a well-documented phenomenon that lacks a widely accepted explanation. Asian Americans’ advantage in this respect has been attributed to three groups of factors: (i) socio-demographic characteristics, (ii) cognitive ability, and (iii) academic effort as measured by characteristics such as attentiveness and work ethic. We combine data from two nationally representative cohort longitudinal surveys to compare Asian-American and white students in their educational trajectories from kindergarten through high school. We find that the Asian-American educational advantage is attributable mainly to Asian students exerting greater academic effort and not to advantages in tested cognitive abilities or socio-demographics. We test explanations for the Asian–white gap in academic effort and find that the gap can be further attributed to (i) cultural differences in beliefs regarding the connection between effort and achievement and (ii) immigration status. Finally, we highlight the potential psychological and social costs associated with Asian-American achievement success. PMID:24799702

Measuring home advantage in Spanish handball.

PubMed

Gutiérrez Aguilar, Oscar; Saavedra García, Miguel; Fernández Romero, Juan José

2012-02-01

Since Pollard established the system for analysing home advantage in 1986, it has been demonstrated and quantified in various sports, including many team sports. This study aims to assess whether home advantage exists in handball, using a sample of more than 19,000 Spanish handball league games. Results of the games played at home and away, the sex of the players, and the levels of the competition were included as variables. In Spanish handball, there was a home advantage of 61%, which means, on average, the team playing at home wins 61% of points available. This value varies according to sex and according to competition level, increasing as competition level decreases and season rank improves.

Digital printing

NASA Astrophysics Data System (ADS)

Sobotka, Werner K.

1997-02-01

Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

Salient Public Beliefs Underlying Disaster Preparedness Behaviors: A Theory-Based Qualitative Study.

PubMed

Najafi, Mehdi; Ardalan, Ali; Akbarisari, Ali; Noorbala, Ahmad Ali; Elmi, Helen

2017-04-01

Introduction Given the increasing importance of disaster preparedness in Tehran, the capital of Iran, interventions encouraging disaster preparedness behavior (DPB) are needed. This study was conducted to show how an elicitation method can be used to identify salient consequences, referents, and circumstances about DPB and provide recommendations for interventions and quantitative research. A theory-based qualitative study using a semi-structured elicitation questionnaire was conducted with 132 heads of households from 22 districts in Tehran, Iran. Following the Theory of Planned Behavior (TPB), six open-ended questions were used to record the opinion of people about DPB: advantages of engaging in DPB; disadvantages of doing so; people who approve; people who disapprove; things that make it easy; and things that make it difficult. Content analysis showed the categories of salient consequences, reference groups, and circumstances. The three most frequently mentioned advantages obtained from inhabitants of Tehran were health outcomes (eg, it helps us to save our lives, it provides basic needs, and it protects us until relief workers arrive); other salient advantages were mentioned (eg, helps family reunification). The main disadvantage was preparedness anxiety. Family members were the most frequently mentioned social referent when people were asked who might approve or disapprove of their DPB. The two main circumstances perceived to obstruct DPB included not having enough knowledge or enough time. The results of this qualitative study suggest that interventions to encourage DPB among Tehran inhabitants should address: perceived consequences of DPB on health and other factors beyond health; barriers of not having enough knowledge and time perceived to hinder DPB; and social approval. More accurate research on salient beliefs with close-ended items developed from these open-ended data and with larger sample sizes of Tehran inhabitants is necessary. Research with other stakeholder groups is needed to understand their perceptions about DPB in creating the people's social environment. Najafi M , Ardalan A , Akbarisari A , Noorbala AA , Elmi H . Salient public beliefs underlying disaster preparedness behaviors: a theory-based qualitative study. Prehosp Disaster Med. 2017;32(2):124-133 .

ADVANTAGES/DISADVANTAGES FOR ISCO METHODS IN-SITU FENTON OXIDATION IN-SITU PERMANGANATE OXIDATION

EPA Science Inventory

The advantages and disadvantages of in-situ Fenton oxidation and in-situ permanganate oxidation will be presented. This presentation will provide a brief overview of each technology and a detailed analysis of the advantages and disadvantages of each technology. Included in the ...

BACLAB: A Computer Simulation of a Medical Bacteriology Laboratory--An Aid for Teaching Tertiary Level Microbiology.

ERIC Educational Resources Information Center

Lewington, J.; And Others

1985-01-01

Describes a computer simulation program which helps students learn the main biochemical tests and profiles for identifying medically important bacteria. Also discusses the advantages and applications of this type of approach. (ML)

Effects of Wheel-Load Spatial Repeatability on Road Damage : A Literature Review

DOT National Transportation Integrated Search

1998-09-01

Concerns about growing governmental budgetary deficits and the awareness of the economic advantages associated with a safe and well-maintained road infrastructure are two of the main reasons for devoting attention to better understanding the problem ...

Fan Noise Control Using Herschel-Quincke Resonators

NASA Astrophysics Data System (ADS)

Burdisso, Ricardo A.; Ng, Wing F.

2003-01-01

The research effort proposed for this NASA NRA is mainly experimental. In addition, Virginia Tech is working in partnership with Goodrich Aerospace, Aerostructures Group for the analytical development needed to support the experimental endeavor, i.e. model development, design, and system studies. In this project, Herschel-Quincke (HQ)liner technology experiments will be performed at the NASA Glenn Active Noise Control Fan (ANCF) facility. A schematic of both inlet and aft HQ-liner systems installed in the ANCF rig as well as a picture of the Glenn facility is shown. The main goal is to simultaneously test in both the inlet and bypass duct sections. The by-pass duct will have HQ-systems in both the inner and outer duct walls. The main advantages of performing tests at the ANCF facility are that the effect of the inlet HQ-system on the by-pass HQ-system and vice versa, can be accurately determined from the in-duct modal data. Another significant advantage is that it offers the opportunity to assess (on a common basis) the proposed noise reduction concept on the ANCF rig which in the past has been used for assessing other active and passive noise reduction strategies.

Investing in children: changes in parental spending on children, 1972-2007.

PubMed

Kornrich, Sabino; Furstenberg, Frank

2013-02-01

Parental spending on children is often presumed to be one of the main ways that parents invest in children and a main reason why children from wealthier households are advantaged. Yet, although research has tracked changes in the other main form of parental investment-namely, time-there is little research on spending. We use data from the Consumer Expenditure Survey to examine how spending changed from the early 1970s to the late 2000s, focusing particularly on inequality in parental investment in children. Parental spending increased, as did inequality of investment. We also investigate shifts in the composition of spending and linkages to children's characteristics. Investment in male and female children changed substantially: households with only female children spent significantly less than parents in households with only male children in the early 1970s; but by the 1990s, spending had equalized; and by the late 2000s, girls appeared to enjoy an advantage. Finally, the shape of parental investment over the course of children's lives changed. Prior to the 1990s, parents spent most on children in their teen years. After the 1990s, however, spending was greatest when children were under the age of 6 and in their mid-20s.

Fan Noise Control Using Herschel-quincke Resonators

NASA Technical Reports Server (NTRS)

Burdisso, Ricardo A.; Ng, Wing F.; Provenza, Andrew (Technical Monitor)

2003-01-01

The research effort proposed for this NASA NRA is mainly experimental. In addition, Virginia Tech is working in partnership with Goodrich Aerospace, Aerostructures Group for the analytical development needed to support the experimental endeavor, i.e. model development, design, and system studies. In this project, Herschel-Quincke (HQ)liner technology experiments will be performed at the NASA Glenn Active Noise Control Fan (ANCF) facility. A schematic of both inlet and aft HQ-liner systems installed in the ANCF rig as well as a picture of the Glenn facility is shown. The main goal is to simultaneously test in both the inlet and bypass duct sections. The by-pass duct will have HQ-systems in both the inner and outer duct walls. The main advantages of performing tests at the ANCF facility are that the effect of the inlet HQ-system on the by-pass HQ-system and vice versa, can be accurately determined from the in-duct modal data. Another significant advantage is that it offers the opportunity to assess (on a common basis) the proposed noise reduction concept on the ANCF rig which in the past has been used for assessing other active and passive noise reduction strategies.

Design of a mobile hydrological data measurement system

NASA Astrophysics Data System (ADS)

Liu, Yunping; Wang, Tianmiao; Dai, Fenfen

2017-06-01

The current hydrological data acquisition is mainly used in the instrument measurement. Instrument measurement equipment is mainly fixed in a certain water area and the device is easy to be lost. In view of a series of problems, the dynamic measurement system is established by the method of unmanned surface vessel and embedded technology, which can realize any positions measurement of a lake. This method has many advantages, such as mobile convenience, saving money and so on.

Utilization of AERONET polarimetric measurements for improving retrieval of aerosol microphysics: GSFC, Beijing and Dakar data analysis

NASA Astrophysics Data System (ADS)

Fedarenka, Anton; Dubovik, Oleg; Goloub, Philippe; Li, Zhengqiang; Lapyonok, Tatyana; Litvinov, Pavel; Barel, Luc; Gonzalez, Louis; Podvin, Thierry; Crozel, Didier

2016-08-01

The study presents the efforts on including the polarimetric data to the routine inversion of the radiometric ground-based measurements for characterization of the atmospheric aerosols and analysis of the obtained advantages in retrieval results. First, to operationally process the large amount of polarimetric data the data preparation tool was developed. The AERONET inversion code adapted for inversion of both intensity and polarization measurements was used for processing. Second, in order to estimate the effect from utilization of polarimetric information on aerosol retrieval results, both synthetic data and the real measurements were processed using developed routine and analyzed. The sensitivity study has been carried out using simulated data based on three main aerosol models: desert dust, urban industrial and urban clean aerosols. The test investigated the effects of utilization of polarization data in the presence of random noise, bias in measurements of optical thickness and angular pointing shift. The results demonstrate the advantage of polarization data utilization in the cases of aerosols with pronounced concentration of fine particles. Further, the extended set of AERONET observations was processed. The data for three sites have been used: GSFC, USA (clean urban aerosol dominated by fine particles), Beijing, China (polluted industrial aerosol characterized by pronounced mixture of both fine and coarse modes) and Dakar, Senegal (desert dust dominated by coarse particles). The results revealed considerable advantage of polarimetric data applying for characterizing fine mode dominated aerosols including industrial pollution (Beijing). The use of polarization corrects particle size distribution by decreasing overestimated fine mode and increasing the coarse mode. It also increases underestimated real part of the refractive index and improves the retrieval of the fraction of spherical particles due to high sensitivity of polarization to particle shape. Overall, the study demonstrates a substantial value of polarimetric data for improving aerosol characterization.

Advantages of soft subdural implants for the delivery of electrochemical neuromodulation therapies to the spinal cord

NASA Astrophysics Data System (ADS)

Capogrosso, Marco; Gandar, Jerome; Greiner, Nathan; Moraud, Eduardo Martin; Wenger, Nikolaus; Shkorbatova, Polina; Musienko, Pavel; Minev, Ivan; Lacour, Stephanie; Courtine, Grégoire

2018-04-01

Objective. We recently developed soft neural interfaces enabling the delivery of electrical and chemical stimulation to the spinal cord. These stimulations restored locomotion in animal models of paralysis. Soft interfaces can be placed either below or above the dura mater. Theoretically, the subdural location combines many advantages, including increased selectivity of electrical stimulation, lower stimulation thresholds, and targeted chemical stimulation through local drug delivery. However, these advantages have not been documented, nor have their functional impact been studied in silico or in a relevant animal model of neurological disorders using a multimodal neural interface. Approach. We characterized the recruitment properties of subdural interfaces using a realistic computational model of the rat spinal cord that included explicit representation of the spinal roots. We then validated and complemented computer simulations with electrophysiological experiments in rats. We additionally performed behavioral experiments in rats that received a lateral spinal cord hemisection and were implanted with a soft interface. Main results. In silico and in vivo experiments showed that the subdural location decreased stimulation thresholds compared to the epidural location while retaining high specificity. This feature reduces power consumption and risks of long-term damage in the tissues, thus increasing the clinical safety profile of this approach. The hemisection induced a transient paralysis of the leg ipsilateral to the injury. During this period, the delivery of electrical stimulation restricted to the injured side combined with local chemical modulation enabled coordinated locomotor movements of the paralyzed leg without affecting the non-impaired leg in all tested rats. Electrode properties remained stable over time, while anatomical examinations revealed excellent bio-integration properties. Significance. Soft neural interfaces inserted subdurally provide the opportunity to deliver electrical and chemical neuromodulation therapies using a single, bio-compatible and mechanically compliant device that effectively alleviates locomotor deficits after spinal cord injury.

Lipid nanoparticles (SLN & NLC) for delivery of vitamin E: a comprehensive review.

PubMed

Saez, V; Souza, I D L; Mansur, C R E

2018-04-01

The antioxidative and photoprotective properties of vitamin E have caused it to be included as an active agent in various pharmaceutical and cosmetic products. However, its lipophilicity, chemical instability and poor skin penetration have limited the effectiveness of these formulations. For that reason, many attempts to include it in different drug delivery systems have been made. In recent decades, lipid nanoparticles have received special attention due to their advantages of compatibility with the skin, ability to enhance penetration of drugs in the stratum corneum, protection of the encapsulated substance against degradation induced by the external medium and control of drug release. This work reviews the current status of the encapsulation of vitamin E in lipid nanoparticles. We describe the most important methods for obtaining and characterizing lipid nanoparticles containing vitamin E (LNP-VE), various techniques for the evaluation of vitamin E's properties after encapsulation, the main in vitro and in vivo studies of the potential effectiveness or toxicity of LNP-VE, the formulations and stability studies of this delivery system, the commercial products based on LNP-VE and the regulatory aspects related to lipid nanoparticles. Finally, we discuss the most relevant advantages of encapsulating vitamin E in such particles and critical aspects that still demand attention to enhance the potential of solid lipid nanoparticles to deliver vitamin E. © 2018 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Main principles of passive devices based on graphene and carbon films in microwave-THz frequency range

NASA Astrophysics Data System (ADS)

Kuzhir, Polina P.; Paddubskaya, Alesia G.; Volynets, Nadezhda I.; Batrakov, Konstantin G.; Kaplas, Tommi; Lamberti, Patrizia; Kotsilkova, Rumiana; Lambin, Philippe

2017-07-01

The ability of thin conductive films, including graphene, pyrolytic carbon (PyC), graphitic PyC (GrPyC), graphene with graphitic islands (GrI), glassy carbon (GC), and sandwich structures made of all these materials separated by polymer slabs to absorb electromagnetic radiation in microwave-THz frequency range, is discussed. The main physical principles making a basis for high absorption ability of these heterostructures are explained both in the language of electromagnetic theory and using representation of equivalent electrical circuits. The idea of using carbonaceous thin films as the main working elements of passive radiofrequency (RF) devices, such as shields, filters, polarizers, collimators, is proposed theoretically and proved experimentally. The important advantage of PyC, GrI, GrPyC, and GC is that, in contrast to graphene, they either can be easily deposited onto a dielectric substrate or are strong enough to allow their transfer from the catalytic substrate without a shuttle polymer layer. This opens a new avenue toward the development of a scalable protocol for cost-efficient production of ultralight electromagnetic shields that can be transferred to commercial applications. A robust design via finite-element method and design of experiment for RF devices based on carbon/graphene films and sandwiches is also discussed in the context of virtual prototyping.

Guidelines for the Use of Protein Domains in Acidic Phospholipid Imaging.

PubMed

Platre, Matthieu Pierre; Jaillais, Yvon

2016-01-01

Acidic phospholipids are minor membrane lipids but critically important for signaling events. The main acidic phospholipids are phosphatidylinositol phosphates (PIPs also known as phosphoinositides), phosphatidylserine (PS), and phosphatidic acid (PA). Acidic phospholipids are precursors of second messengers of key signaling cascades or are second messengers themselves. They regulate the localization and activation of many proteins, and are involved in virtually all membrane trafficking events. As such, it is crucial to understand the subcellular localization and dynamics of each of these lipids within the cell. Over the years, several techniques have emerged in either fixed or live cells to analyze the subcellular localization and dynamics of acidic phospholipids. In this chapter, we review one of them: the use of genetically encoded biosensors that are based on the expression of specific lipid binding domains (LBDs) fused to fluorescent proteins. We discuss how to design such sensors, including the criteria for selecting the lipid binding domains of interest and to validate them. We also emphasize the care that must be taken during data analysis as well as the main limitations and advantages of this approach.

High Performance ZVT with Bus Clamping Modulation Technique for Single Phase Full Bridge Inverters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xia, Yinglai; Ayyanar, Raja

2016-03-20

This paper proposes a topology based on bus clamping modulation and zero-voltage-transition (ZVT) technique to realize zero-voltage-switching (ZVS) for all the main switches of the full bridge inverters, and inherent ZVS and/or ZCS for the auxiliary switches. The advantages of the strategy include significant reduction in the turn-on loss of the ZVT auxiliary switches which typically account for a major part of the total loss in other ZVT circuits, and reduction in the voltage ratings of auxiliary switches. The modulation scheme and the commutation stages are analyzed in detail. Finally, a 1kW, 500 kHz switching frequency inverter of the proposedmore » topology using SiC MOSFETs has been built to validate the theoretical analysis. The ZVT with bus clamping modulation technique of fixed timing and adaptive timing schemes are implemented in DSP TMS320F28335 resulting in full ZVS for the main switches in the full bridge inverter. The proposed scheme can save up to 33 % of the switching loss compared with no ZVT case.« less

Photodynamic therapy: a promising alternative in oncology

NASA Astrophysics Data System (ADS)

Nelius, Thomas; de Riese, Werner T. W.; Filleur, Stephanie

2004-07-01

Photodynamic Therapy (PDT) is a treatment modality that is based on the administration of a photosensitizer and the following application of light in a wavelength range matching the absorption spectrum of the photosensitizer. Ideally the photosensitizer retains in the tumor tissue more than in normal tissue and thus allows targeted destruction of cancerous tissue. The use of PDT is slowly being accepted as a standard treatment for certain types of cancer. This includes mainly treatment strategies with only palliative intentions (obstructive esophageal cancer and advanced lung cancer) while for certain malignant conditions new applications exists that are already intended for cure (e.g. early stage of lung cancer). The main advantage of PDT is that the treatment can be repeated multiple times safely without major side effects. PDT can be safely combined with already established treatment options like surgery, chemotherapy or radiotherapy. A disadvantage of PDT is the only localized effect of the therapy, which usually cannot significantly alter the outcome of a systemic disease. In this paper we review the history of PDT as well as current clinical applications in oncology and future directions.

Simultaneous fingerprint, quantitative analysis and anti-oxidative based screening of components in Rhizoma Smilacis Glabrae using liquid chromatography coupled with Charged Aerosol and Coulometric array Detection.

PubMed

Yang, Guang; Zhao, Xin; Wen, Jun; Zhou, Tingting; Fan, Guorong

2017-04-01

An analytical approach including fingerprint, quantitative analysis and rapid screening of anti-oxidative components was established and successfully applied for the comprehensive quality control of Rhizoma Smilacis Glabrae (RSG), a well-known Traditional Chinese Medicine with the homology of medicine and food. Thirteen components were tentatively identified based on their retention behavior, UV absorption and MS fragmentation patterns. Chemometric analysis based on coulmetric array data was performed to evaluate the similarity and variation between fifteen batches. Eight discriminating components were quantified using single-compound calibration. The unit responses of those components in coulmetric array detection were calculated and compared with those of several compounds reported to possess antioxidant activity, and four of them were tentatively identified as main contributors to the total anti-oxidative activity. The main advantage of the proposed approach was that it realized simultaneous fingerprint, quantitative analysis and screening of anti-oxidative components, providing comprehensive information for quality assessment of RSG. Copyright © 2017 Elsevier B.V. All rights reserved.

Innovative Model of Practice-Oriented Training of Employees of the Town-Forming Enterprise in the Mining Region (by the Example of JSC "SUEK-Kuzbass")

NASA Astrophysics Data System (ADS)

Kulay, Svetlana; Kayachev, Gennady

2017-11-01

The article proposes to improve the system of training of employees of joint-stock company SUEK-Kuzbass in the educational institutions of the Kemerovo region according to the requirements of the company using practice-oriented training technology. The aim of the work is to substantiate the effectiveness of implementing practice-oriented training, identify priority directions and ways of its development. The main objectives of the study are: to identify the main advantages for the company and students; determine the criteria for the success and practical value of applying practice-oriented training for the company; conduct a comparative analysis of the target and practice-oriented model of training for the company. The real needs of the employer through the dual form of training were taking into account. The expansion of positive experience in training engineering personnel in higher education in technology-based training with the involvement of specialists from other regions of the company and expanding training in mining was also included.

Cu-Al-Ni Shape Memory Single Crystal Wires with High Transformation Temperature

NASA Technical Reports Server (NTRS)

Hautcoeur, Alain; Fouché, Florian; Sicre, Jacques

2016-01-01

CN-250X is a new material with higher performance than Nickel-Titanium Shape Memory Alloy (SMA). For space mechanisms, the main disadvantage of Nickel-Titanium Shape Memory Alloy is the limited transformation temperature. The new CN-250X Nimesis alloy is a Cu-Al-Ni single crystal wire available in large quantity because of a new industrial process. The triggering of actuators made with this Cu-Al-Ni single crystal wire can range from ambient temperature to 200 C in cycling and even to 250 C in one-shot mode. Another advantage of CN-250X is a better shape recovery (8 to 10%) than Ni-Ti (6 to 7%). Nimesis is the first company able to produce this type of material with its new special industrial process. A characterization study is presented in this work, including the two main solicitation modes for this material: tensile and torsion. Different tests measure the shape recovery of Cu-Al-Ni single crystals wires during heating from room temperature to a temperature higher than temperature of end of martensitic transformation.

Ion flow in stria vascularis and the production and regulation of cochlear endolymph and the endolymphatic potential.

PubMed

Patuzzi, Robert

2011-07-01

This paper reviews some of what is known about ion transport through the cells of the mammalian stria vascularis, and discusses how the endolymph and endocochlear potential in scala media are produced by the stria's main cell types. It discusses the role of each cells' ion transport proteins from an engineering perspective, and the advantages and disadvantages in using the different transport proteins in the different cells to perform their different roles. To aid this discussion, the use of spreadsheet analysis in the modelling of ion transport in single cells and homogenous epithelia is outlined, including the current-voltage (IV) characteristics of the three main categories of transport proteins (pores, ports and pumps), and the constraint equations that apply under various conditions (the voltage or ionic steady states in the open- and closed-circuit conditions). Also discussed are the circulation of K(+) within the cochlea, and the chloride, salt and water balance of scala media and stria vascularis, and what transport processes may be required to maintain such a balance. Copyright © 2011 Elsevier B.V. All rights reserved.

The Super Separator Spectrometer S3 and the associated detection systems: SIRIUS & LEB-REGLIS3

NASA Astrophysics Data System (ADS)

Déchery, F.; Savajols, H.; Authier, M.; Drouart, A.; Nolen, J.; Ackermann, D.; Amthor, A. M.; Bastin, B.; Berryhill, A.; Boutin, D.; Caceres, L.; Coffey, M.; Delferrière, O.; Dorvaux, O.; Gall, B.; Hauschild, K.; Hue, A.; Jacquot, B.; Karkour, N.; Laune, B.; Le Blanc, F.; Lecesne, N.; Lopez-Martens, A.; Lutton, F.; Manikonda, S.; Meinke, R.; Olivier, G.; Payet, J.; Piot, J.; Pochon, O.; Prince, V.; Souli, M.; Stelzer, G.; Stodel, C.; Stodel, M.-H.; Sulignano, B.; Traykov, E.; Uriot, D.; S³, Sirius; Leb-Reglis3 Collaboration

2016-06-01

The Super Separator Spectrometer (S3) facility is developed in the framework of the SPIRAL2 project [1]. S3 has been designed to extend the capability of the facility to perform experiments with extremely low cross sections, taking advantage of the very high intensity stable beams of the superconducting linear accelerator of SPIRAL2. It will mainly use fusion-evaporation reactions to reach extreme regions of the nuclear chart: new opportunities will be opened for super-heavy element studies and spectroscopy at and beyond the driplines. In addition to our previous article (Déchery et al. [2]) introducing the optical layout of the spectrometer and the expected performances, this article will present the current status of the main elements of the facility: the target station, the superconducting multipole, and the magnetic and electric dipoles, with a special emphasis on the status of the detection system SIRIUS and on the low-energy branch which includes the REGLIS3 system. S3 will also be a source of low energy radioactive isotopes for delivery to the DESIR facility.

A calibration mechanism based on worm drive for space telescope

NASA Astrophysics Data System (ADS)

Chong, Yaqin; Li, Chuang; Xia, Siyu; Zhong, Peifeng; Lei, Wang

2017-08-01

In this paper, a new type of calibration mechanism based on worm drive is presented for a space telescope. This calibration mechanism based on worm drive has the advantages of compact size and self-lock. The mechanism mainly consists of thirty-six LEDs as the light source for flat calibration, a diffuse plate, a step motor, a worm gear reducer and a potentiometer. As the main part of the diffuse plate, a PTFE tablet is mounted in an aluminum alloy frame. The frame is fixed on the shaft of the worm gear, which is driven by the step motor through the worm. The shaft of the potentiometer is connected to that of the worm gear to measure the rotation angle of the diffuse plate through a flexible coupler. Firstly, the calibration mechanism is designed, which includes the LEDs assembly design, the worm gear reducer design and the diffuse plate assembly design. The counterweight blocks and two end stops are also designed for the diffuse plate assembly. Then a modal analysis with finite element method for the diffuse plate assembly is completed.

[Analysis on quality of articles published in Chinese Acupuncture and Moxibustion from 2000 to 2006].

PubMed

Chen, Wen; Huang, Juan; Huang, Ai-ming

2008-01-01

To understand the quality of the papers issued in Chinese Acupuncture and Moxibustion in past 7 years, so as to provide reference for its development. Analyze information quality of the papers based on the treatises issued in Chinese Acupuncture and Moxibustion between 2000-2006. (1) Most of the authors come from medical schools and their affiliated hospitals (including scientific research units), accounting for 61. 0%; (2) Authors of each paper mainly range between 2-3 persons, accounting for 40.0%; (3) There are 405 papers with support of funds (mainly from provincial and ministerial funds) in the 7 years, accounting for 26. 2% of the total number of the papers; (4) Publication delay shortens annually, averaging 255. 3 days in the past 7 years and 210.5 days in 2006; (5) RCT papers of clinical researches account for 30.4% and show a raising tendency year by year. Chinese Acupuncture and Moxibustion has considerable advantages in the above-mentioned four aspects, showing the high quality of "key periodical", but the proportion of RCT papers still needs to be further increased.

[Niche and interspecific association of the dominant fish in the south coastal waters of Wenzhou, China].

PubMed

Dong, Jing Rui; Shui, Bo Nian; Hu, Cheng Ye; Shui, Yu Yue; DU, Xiao; Tian, Kuo

2017-05-18

The studies about the niche and interspecific association in China were mainly focused on the plants, birds and marine animals, and seldom on fish. Based on the fishery resources survey in spring (May) and autumn (September) in 2015, the associations among major fish species in south coastal waters of Wenzhou were investigated. The methods including niche breadth, niche overlap, variance ratio (VR), Χ 2 -test, association coefficient (AC), percentage of co-occurrence (PC) and point correlation coefficients (Ф) were used. The results showed that 47 fish species were identified, including 9 orders, 27 families and 41 genera. Four species were dominant species and 9 were important species, which together accounted for 17%. The niche breadth cluster analysis demonstrated two clearly identifiable ecological niches. The first one referred to wide niche that included Harpodon nehereus, Collichthys lucidus, Engraulis japonicas, Pampus echinogaster, Argyrosomus argentatus, Polynemus sextarius, Decapterus maruadsi and Trichiurus haumela, and the second one was narrow niche that included Muraenesox cinereus, Amblychaeturichthys hexanema, Cunoglossus robustus, Pseudosciaena polyactis and Ilisha elongate. The niche overlap value of the main fish was 0-0.90, indicating that there was difference in the resource utilization among the species. The ecological niche widths of C. robustus and M. cinereus were narrow, and the overlap values were high. This indicated that there was competition between these two species. The VR analysis revealed significant positive correlation among the main fish species. In view of the advantages of Ф value, which could reduce the impact of the analysis results of Χ 2 -test, AC and PC to the interspecific association, the Ф value method was selected in this study, and the association of 63 couples were positive. Both the interspecific association and ecological niche had different degrees of correlation with the stability of community structure and community succession.

Issues in Education: African American Male-Only Schools. Is That the Solution?

ERIC Educational Resources Information Center

Greathouse, Betty; Sparling, Saundra

1993-01-01

Examines the advantages and disadvantages of African-American male-only classes and schools, which are staffed mainly by African-American male teachers. Focuses on attempts to create such institutions in Detroit, Baltimore, Milwaukee, and Dade County, Florida. (MDM)

New system for bathing bedridden patients

NASA Technical Reports Server (NTRS)

Greenleaf, J. E.; Staley, R. A.; Payne, P. A.

1973-01-01

Multihead shower facility can be used with minimal patient handling. Waterproof curtain allows patient to bathe with his head out of shower. He can move completely inside shower to wash his face and hair. Main advantage of shower system is time saved in giving bath.

Our method of correcting cryptotia.

PubMed

Yanai, A; Tange, I; Bandoh, Y; Tsuzuki, K; Sugino, H; Nagata, S

1988-12-01

Our technique for the correction of cryptotia using both Z-plasty and the advancement flap is described. The main advantages are the simple design of the skin incision and the possibility of its application to cryptotia other than severe cartilage deformity and extreme lack of skin.

Appetite for the selfish gene.

PubMed

Ostan, Iztok; Poljsak, Borut; Simcic, Marjan; Tijskens, L M M

2010-06-01

In developed countries, where the majority of the population has enough income to afford healthy diets, a large number of the inhabitants nevertheless choose unhealthy nutrition. WHO and FAO strategies to overcome this problem are mostly based on educational means. Implicitly, this approach is based on the presumption that the main causes of the problem are ignorance and culturally acquired bad habits. It has already been shown that wild animals, evidently acting solely on instinct without cultural effects, display tendencies that may damage their longevity: they tend to avoid healthy types of caloric restriction, prefer processed to raw food, and have an excessive intake of food stimulants and proteins when available (Ostan et al., 2009). This paper presents evidence for such nutritional patterns in humans as well and broadens the discourse to include proteins and fats and describes some human biological traits that present important differences between humans and other primates; among them are the human tendency for overeating and the inadequacy of a totally raw diet for human consumption (despite having some advantages for the human immune system). From an evolutionary perspective these strategies offer a biological advantage by enhancing the reproductive capability of the organisms, according to Dawkins' theory of the Selfish Gene. Genomic-based pleasure of such nutrition seems to be the main cause of instinctive nutritional drives. Further research on the process of food acceptance is needed to determine the role and importance of genomic-based pleasure compared to epigenetic or culture-based pleasure. Both, however, seem to be important and very stable factors in human nutritional choice and seem to prevail over conscious factors in food acceptance. Copyright 2010 Elsevier Ltd. All rights reserved.

Labour perspectives of engineering degrees in the European Higher Education Area (EHEA): a case of study in the University of Cordoba (Spain)

NASA Astrophysics Data System (ADS)

Taguas, E. V.; Redel, M. D.; Pérez, R.; Peña, A.

2009-04-01

The Bologna process is reaching its final stages and is causing controversy among students. The adaptation of European universities to the European Higher Education Area (EHEA) entails not only the modification of curricular programmes and the nomenclature and duration of degrees, but also the incorporation of new teaching strategies aimed at ensuring that students acquire transversal skills and aptitudes and at increasing student participation in the teaching-learning process. A number of surveys have been carried out during the last few courses among students doing degrees in engineering (Industrial Engineering, Agronomy Engineering and Forestry Engineering). These surveys include questions on their knowledge of Bologna process, its advantages and drawbacks, their opinion about optional masters or doctorate degrees, what perspectives their degrees have on the labour market and suggestions for improvement. Although the different degrees showed notable differences, the content of EHEA is well-known by less than 30% of students, while 40% of them state they know about their perspectives on the labour market. The main advantages of EHEA were related to the improvement of practical knowledge in the subjects, the recognition of degrees in Europe and wider working opportunities. The main drawbacks pointed out were worse and shorter training periods, higher costs and fiercer competition between different degrees. In addition, they suggested that the new degrees are better adjusted to the demands of the labour market. 60% and 40% of them, respectively, approved of Masters degrees and PhDs. These features should be taken into account to organize and improve the contents of the degrees as well as to involve the students in the future of University education.

The radiation fields around a proton therapy facility: A comparison of Monte Carlo simulations

NASA Astrophysics Data System (ADS)

Ottaviano, G.; Picardi, L.; Pillon, M.; Ronsivalle, C.; Sandri, S.

2014-02-01

A proton therapy test facility with a beam current lower than 10 nA in average, and an energy up to 150 MeV, is planned to be sited at the Frascati ENEA Research Center, in Italy. The accelerator is composed of a sequence of linear sections. The first one is a commercial 7 MeV proton linac, from which the beam is injected in a SCDTL (Side Coupled Drift Tube Linac) structure reaching the energy of 52 MeV. Then a conventional CCL (coupled Cavity Linac) with side coupling cavities completes the accelerator. The linear structure has the important advantage that the main radiation losses during the acceleration process occur to protons with energy below 20 MeV, with a consequent low production of neutrons and secondary radiation. From the radiation protection point of view the source of radiation for this facility is then almost completely located at the final target. Physical and geometrical models of the device have been developed and implemented into radiation transport computer codes based on the Monte Carlo method. The scope is the assessment of the radiation field around the main source for supporting the safety analysis. For the assessment independent researchers used two different Monte Carlo computer codes named FLUKA (FLUktuierende KAskade) and MCNPX (Monte Carlo N-Particle eXtended) respectively. Both are general purpose tools for calculations of particle transport and interactions with matter, covering an extended range of applications including proton beam analysis. Nevertheless each one utilizes its own nuclear cross section libraries and uses specific physics models for particle types and energies. The models implemented into the codes are described and the results are presented. The differences between the two calculations are reported and discussed pointing out disadvantages and advantages of each code in the specific application.

A review of lipidomic technologies applicable to sphingolipidomics and their relevant applications

PubMed Central

Han, Xianlin; Jiang, Xuntian

2009-01-01

Sphingolipidomics, a branch of lipidomics, focuses on the large-scale study of the cellular sphingolipidomes. In the current review, two main approaches for the analysis of cellular sphingolipidomes (i.e. LC-MS- or LC-MS/MS-based approach and shotgun lipidomics-based approach) are briefly discussed. Their advantages, some considerations of these methods, and recent applications of these approaches are summarized. It is the authors’ sincere hope that this review article will add to the readers understanding of the advantages and limitations of each developed method for the analysis of a cellular sphingolipidome. PMID:19690629

Tachometer Derived From Brushless Shaft-Angle Resolver

NASA Technical Reports Server (NTRS)

Howard, David E.; Smith, Dennis A.

1995-01-01

Tachometer circuit operates in conjunction with brushless shaft-angle resolver. By performing sequence of straightforward mathematical operations on resolver signals and utilizing simple trigonometric identity, generates voltage proportional to rate of rotation of shaft. One advantage is use of brushless shaft-angle resolver as main source of rate signal: no brushes to wear out, no brush noise, and brushless resolvers have proven robustness. No switching of signals to generate noise. Another advantage, shaft-angle resolver used as shaft-angle sensor, tachometer input obtained without adding another sensor. Present circuit reduces overall size, weight, and cost of tachometer.

Effects of HfB2 and HfN Additions on the Microstructures and Mechanical Properties of TiB2-Based Ceramic Tool Materials

PubMed Central

An, Jing; Song, Jinpeng; Liang, Guoxing; Gao, Jiaojiao; Xie, Juncai; Cao, Lei; Wang, Shiying; Lv, Ming

2017-01-01

The effects of HfB2 and HfN additions on the microstructures and mechanical properties of TiB2-based ceramic tool materials were investigated. The results showed that the HfB2 additive not only can inhibit the TiB2 grain growth but can also change the morphology of some TiB2 grains from bigger polygons to smaller polygons or longer ovals that are advantageous for forming a relatively fine microstructure, and that the HfN additive had a tendency toward agglomeration. The improvement of flexural strength and Vickers hardness of the TiB2-HfB2 ceramics was due to the relatively fine microstructure; the decrease of fracture toughness was ascribed to the formation of a weaker grain boundary strength due to the brittle rim phase and the poor wettability between HfB2 and Ni. The decrease of the flexural strength and Vickers hardness of the TiB2-HfN ceramics was due to the increase of defects such as TiB2 coarse grains and HfN agglomeration; the enhancement of fracture toughness was mainly attributed to the decrease of the pore number and the increase of the rim phase and TiB2 coarse grains. The toughening mechanisms of TiB2-HfB2 ceramics mainly included crack bridging and transgranular fracture, while the toughening mechanisms of TiB2-HfN ceramics mainly included crack deflection, crack bridging, transgranular fracture, and the core-rim structure. PMID:28772821

THE ADVANTAGES OF FEMTOSECOND LASER-ASSISTED CATARACT SURGERY

PubMed Central

Gavris, M Monica; Belicioiu, Roxana; Olteanu, Ioana; Horge, Ioan

2015-01-01

Purpose: To present the advantages of performing femtosecond laser-assisted (Alcon-LenSx Inc.) cataract surgery. Methods: Cataract surgery was performed with the LenSx femtosecond laser (Alcon-LenSx Inc.) in 50 eyes of 50 patients. The laser was programmed to perform a 4,9-4,5 mm capsulorhexis, a 2,3 mm main corneal incision, two 1,3 mm side-port incisions and either a hybrid-pattern or a cylinder-pattern fragmentation of the nucleus. The evaluated parameters were the capsulotomy, the corneal wounds and the nucleus fragmentation. Phacoemulsification of the nucleus and aspiration of the cortex were performed with the Alcon Centurion Vision System and monofocal, toric and multifocal IOLs were successfully implanted. Results: A continuous, central, curvilinear capsulorhexis was performed in 48 cases, 96% (free-floating capsulotomy). In 2 cases, micro-adhesions were reported and detached with the Utrata forceps. Femtolaser capsulotomy resulted in a complete overlap of the anterior capsule over the IOL optics in all cases. Horizontal decentration was found in 2 cases, 4% and vertical decentration in 1 case, 2%. The main corneal incision was self-sealing in 49 cases, 98%. Sutures were used in 1 case, 2%. The hybrid pattern of nucleus fragmentation was used in 42 cases, 84% and the cylindrical pattern in 8 cases, 16%. The fragmentation was incomplete in one case of white cataract and in one case of traumatic cataract. Conclusions: The main advantages of femtolaser cataract surgery are standardized corneal incisions, perfectly centered, round capsulorhexis, and lens nucleus fragmentation even in eyes with hard cataracts. The laser precision is due to the real time OCT software programs, which cover the whole anterior segment, up to the posterior lens capsule. PMID:27373114

Comparison of costs for three hypothetical alternative kitchen waste management systems.

PubMed

Schiettecatte, Wim; Tize, Ronald; De Wever, Heleen

2014-11-01

Urban water and waste management continues to be a major challenge, with the Earth's population projected to rise to 9 billion by 2050, with 70% of this population expected to live in cities. A combined treatment of wastewater and the organic fraction of municipal solid waste offers opportunities for improved environmental protection and energy recovery, but the collection and transport of organic wastes must be cost effective. This study compares three alternative kitchen waste collection and transportation systems for a virtual modern urban area with 300,000 residents and a population density of 10,000 persons per square kilometre. Door-to-door collection, being the standard practice in modern urban centres, remains the most economically advantageous at a cost of 263 euros per tonne of kitchen waste. Important drawbacks are the difficult logistics, increased city traffic, air and noise pollution. The quieter, cleaner and more hygienic vacuum transport of kitchen waste comes with a higher cost of 367 euros per tonne, mainly resulting from a higher initial investment cost for the system installation. The third option includes the well-known use of under-sink food waste disposers (often called garbage grinders) that are connected to the kitchen's wastewater piping system, with a total yearly cost of 392 euros per tonne. Important advantages with this system are the clean operation and the current availability of a city-wide sewage conveyance pipeline system. Further research is recommended, for instance the application of a life cycle assessment approach, to more fully compare the advantages and disadvantages of each option. © The Author(s) 2014.

Advantages and Disadvantages of Health Care Accreditation Mod­els

PubMed Central

Tabrizi, Jafar S.; Gharibi, Farid; Wilson, Andrew J.

2011-01-01

Background: This systematic review seeks to define the general advantages and disadvan­tages of accreditation programs to assist in choosing the most appropriate approach. Method: Systematic search of SID, Ovid Medline & PubMed databases was conducted by the keywords of accreditation, hospital, medical practice, clinic, accreditation models, health care and Persian meanings. From 2379 initial articles, 83 articles met the full inclusion criteria. From initial analysis, 23 attributes were identified which appeared to define advantages and disadvantages of different accreditation approaches and the available systems were compared on these. Results: Six systems were identified in the international literature including the JCAHO from USA, the Canadian program of CCHSA, and the accreditation programs of UK, Australia, New Zealand and France. The main distinguishing attributes among them were: quality improve­ment, patient and staff safety, improving health services integration, public’s confi­dence, effectiveness and efficiency of health services, innovation, influence global standards, information management, breadth of activity, history, effective relationship with stakeholders, agreement with AGIL attributes and independence from government. Conclusion: Based on 23 attributes of comprehensive accreditation systems we have defined from a systematic review, the JCAHO accreditation program of USA and then CCHSA of Can­ada offered the most comprehensive systems with the least disadvantages. Other programs such as the ACHS of Australia, ANAES of France, QHNZ of New Zealand and UK accredita­tion programs were fairly comparable according to these criteria. However the decision for any country or health system should be based on an assessment weighing up their specific objec­tives and needs. PMID:24688896

A high temperature testing system for ceramic composites

NASA Technical Reports Server (NTRS)

Hemann, John

1994-01-01

Ceramic composites are presently being developed for high temperature use in heat engine and space power system applications. The operating temperature range is expected to be 1090 to 1650 C (2000 F to 3000 F). Very little material data is available at these temperatures and, therefore, it is desirable to thoroughly characterize the basic unidirectional fiber reinforced ceramic composite. This includes testing mainly for mechanical material properties at high temperatures. The proper conduct of such characterization tests requires the development of a tensile testing system includes unique gripping, heating, and strain measuring devices which require special considerations. The system also requires an optimized specimen shape. The purpose of this paper is to review various techniques for measuring displacements or strains, preferably at elevated temperatures. Due to current equipment limitations it is assumed that the specimen is to be tested at a temperature of 1430 C (2600F) in an oxidizing atmosphere. For the most part, previous high temperature material characterization tests, such as flexure and tensile tests, have been performed in inert atmospheres. Due to the harsh environment in which the ceramic specimen is to be tested, many conventional strain measuring techniques can not be applied. Initially a brief description of the more commonly used mechanical strain measuring techniques is given. Major advantages and disadvantages with their application to high temperature tensile testing of ceramic composites are discussed. Next, a general overview is given for various optical techniques. Advantages and disadvantages which are common to these techniques are noted. The optical methods for measuring strain or displacement are categorized into two sections. These include real-time techniques. Finally, an optical technique which offers optimum performance with the high temperature tensile testing of ceramic composites is recommended.

Metal Building Systems Fit To Be Tried

ERIC Educational Resources Information Center

Nation's Schools, 1974

1974-01-01

Describes the advantages of metal building systems in school construction. These advantages include faster occupancy, lower initial costs, reduced maintenance, flexibility, and predictability of cost. (Author/DN)

Applications and societal benefits of plastics.

PubMed

Andrady, Anthony L; Neal, Mike A

2009-07-27

This article explains the history, from 1600 BC to 2008, of materials that are today termed 'plastics'. It includes production volumes and current consumption patterns of five main commodity plastics: polypropylene, polyethylene, polyvinyl chloride, polystyrene and polyethylene terephthalate. The use of additives to modify the properties of these plastics and any associated safety, in use, issues for the resulting polymeric materials are described. A comparison is made with the thermal and barrier properties of other materials to demonstrate the versatility of plastics. Societal benefits for health, safety, energy saving and material conservation are described, and the particular advantages of plastics in society are outlined. Concerns relating to littering and trends in recycling of plastics are also described. Finally, we give predictions for some of the potential applications of plastic over the next 20 years.

Applications and societal benefits of plastics

PubMed Central

Andrady, Anthony L.; Neal, Mike A.

2009-01-01

This article explains the history, from 1600 BC to 2008, of materials that are today termed ‘plastics’. It includes production volumes and current consumption patterns of five main commodity plastics: polypropylene, polyethylene, polyvinyl chloride, polystyrene and polyethylene terephthalate. The use of additives to modify the properties of these plastics and any associated safety, in use, issues for the resulting polymeric materials are described. A comparison is made with the thermal and barrier properties of other materials to demonstrate the versatility of plastics. Societal benefits for health, safety, energy saving and material conservation are described, and the particular advantages of plastics in society are outlined. Concerns relating to littering and trends in recycling of plastics are also described. Finally, we give predictions for some of the potential applications of plastic over the next 20 years. PMID:19528050

Alternative divertor target concepts for next step fusion devices

NASA Astrophysics Data System (ADS)

Mazul, I. V.

2016-12-01

The operational conditions of a divertor target in the next steps of fusion devices are more severe in comparison with ITER. The current divertor designs and technologies have a limited application concerning these conditions, and so new design concepts/technologies are required. The main reasons which practically prevent the use of the traditional motionless solid divertor target are analyzed. We describe several alternative divertor target concepts in this paper. The comparative analysis of these concepts (including the advantages and the drawbacks) is made and the prospects for their practical implementation are prioritized. The concept of the swept divertor target with a liquid metal interlayer between the moving armour and motionless heat-sink is presented in more detail. The critical issues of this design are listed and outlined, and the possible experiments are presented.

Selective removal of monoterpenes from bergamot oil by inclusion in deoxycholic acid.

PubMed

Fantin, Giancarlo; Fogagnolo, Marco; Maietti, Silvia; Rossetti, Stefano

2010-05-12

A new approach for removing monoterpenes (MTs) from bergamot oil by selective inclusion in deoxycholic acid (DCA) is proposed. The inclusion process is very efficient, the included fraction being composed mainly of limonene (71.7%) and gamma-terpinene (19.8%). On the other hand, the deterpenated bergamot oil fraction showed for the linalool and linalyl acetate derivatives significant increases from 16.6 and 21.4% to 18.3 and 42.2%, respectively. The major advantages of this methodology are its simplicity, the mild conditions employed, and the quantitative recovery of both host (DCA) and guest (monoterpenes) compounds. Differential scanning calorimetry (DSC), thermal gravimetry (TG), powder X-ray diffractometry (XRPD), infrared spectroscopy (IR), and proton magnetic resonance ((1)H NMR) analysis were used to investigate and characterize the inclusion compounds.

The Jefferson Science Fellows (JSF) program at the US Department of State

NASA Astrophysics Data System (ADS)

Peterson, Roy

2014-09-01

In 2004 the US Department of State and the National Academies established the Jefferson Science Fellows program, to bring tenured faculty in sciences, engineering, and medicine to the Department of State or USAID for a year in residence, with continuing connections. Over twenty physical scientists have been Fellows, working in a wide variety of offices on a broad range of topics. The main advantage to Fellows is the opportunity to make an impact on important national and international issues, applying skills and judgments gained through their research, teaching, and service. The JSF experience can also create broader horizons for physicists, especially beyond the laboratory. The selection process and examples, including my own, will be described. Information can be found at //sites.nationalacademies.org/PGA/Jefferson/.

The Genome of the Western Clawed Frog Xenopus tropicalis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hellsten, Uffe; Harland, Richard M.; Gilchrist, Michael J.

2009-10-01

The western clawed frog Xenopus tropicalis is an important model for vertebrate development that combines experimental advantages of the African clawed frog Xenopus laevis with more tractable genetics. Here we present a draft genome sequence assembly of X. tropicalis. This genome encodes over 20,000 protein-coding genes, including orthologs of at least 1,700 human disease genes. Over a million expressed sequence tags validated the annotation. More than one-third of the genome consists of transposable elements, with unusually prevalent DNA transposons. Like other tetrapods, the genome contains gene deserts enriched for conserved non-coding elements. The genome exhibits remarkable shared synteny with humanmore » and chicken over major parts of large chromosomes, broken by lineage-specific chromosome fusions and fissions, mainly in the mammalian lineage.« less

Performance and Selectivity of Ceramic Membranes in the Ultrafiltration of Model Emulsion in Saline

NASA Astrophysics Data System (ADS)

Ćwirko, Konrad; Kalbarczyk-Jedynak, Agnieszka

2017-06-01

Oily wastewaters from different onshore and offshore installations and from maritime transport pose a serious threat to the environment so they must be treated by multistage separation also including membrane processes. The main advantages of such membranes are high performance and selectivity, high resistance for temperature and pressure, resistance for acids, bases and solvents, long service life and for application - significant reduction of industries and transport environmental impact. This work presents the results of the process of separation of oil from the emulsion with NaCl addition. Research was performed with a use of laboratory installation with ceramic 300 kDa membrane. The analysis concerned performance and selectivity of a membrane in the function of time and test results have been subsequently compared with the requirements of the IMO.

Does the Culture of Modern Day Palliative Care Social Work Leave Room for Leadership?

PubMed

Davidson, Jason

2016-04-02

This paper describes research undertaken as part of an MA study in leadership. It draws on interviews with six high profile leaders at the fore front of end of life care sector in the UK. Its findings and emerging themes offer insights about the opportunities for social work leaders in palliative care in the future and how the profession and palliative care sector address current barriers to taking advantage of such opportunity. The main focus of this paper is leadership related to palliative care social work. However, it relates to much broader themes including the history, politics and culture of this profession and the requirements for leadership on the part of social work in the broader contexts of health and social care.

Development of salt production technology using prism greenhouse method

NASA Astrophysics Data System (ADS)

Guntur, G.; Jaziri, A. A.; Prihanto, A. A.; Arisandi, D. M.; Kurniawan, A.

2018-01-01

The main problem of salt production in Indonesia is low productivity and quality because the technology used commonly by Indonesian salt farmers is traditional method. This research aims to increase production of salt by using the prism greenhouse method. The prism greenhouse method is a salt production system with a combination of several salt production technologies, including geomembrane, threaded filter, and prism greenhouse technology. This research method used descriptive method. The results of this study were the productivity increased threefold, and the quality of salt produced also increased in terms of the content of NaCl from 85% to 95%. In addition, salt production with the prism greenhouse method has several advantages, such as faster harvest time, weather resistance, easy to use, and higher profit than traditional methods.

South Africa: the new world of disability.

PubMed

Coetzer, Pieter

2008-01-01

Over the past 10 years, unique business imperatives in South Africa have led to innovative risk product design, some of which are still unfamiliar to the rest of the world. The main drivers are: the unique mix of first- and third-world societies in our country, and an energetic marketing force operating in an already highly saturated insurance market. As a result, new product design has become one of the most effective ways to grow new business volumes in this competitive environment. This article reviews some of the unique products available and their advantages, target markets and disadvantages. The products that are discussed include lump sum total and permanent disability benefits, extended critical illness products, cover for impairment of function as well as risk products for people living with HIV/AIDS.

Energy–density functional plus quasiparticle–phonon model theory as a powerful tool for nuclear structure and astrophysics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsoneva, N., E-mail: Nadia.Tsoneva@theo.physik.uni-giessen.de; Lenske, H.

During the last decade, a theoretical method based on the energy–density functional theory and quasiparticle–phonon model, including up to three-phonon configurations was developed. The main advantages of themethod are that it incorporates a self-consistentmean-field and multi-configuration mixing which are found of crucial importance for systematic investigations of nuclear low-energy excitations, pygmy and giant resonances in an unified way. In particular, the theoretical approach has been proven to be very successful in predictions of new modes of excitations, namely pygmy quadrupole resonance which is also lately experimentally observed. Recently, our microscopically obtained dipole strength functions are implemented in predictions of nucleon-capturemore » reaction rates of astrophysical importance. A comparison to available experimental data is discussed.« less

Research of an optimization design method of integral imaging three-dimensional display system

NASA Astrophysics Data System (ADS)

Gao, Hui; Yan, Zhiqiang; Wen, Jun; Jiang, Guanwu

2016-03-01

The information warfare needs a highly transparent environment of battlefield, it follows that true three-dimensional display technology has obvious advantages than traditional display technology in the current field of military science and technology. It also focuses on the research progress of lens array imaging technology and aims at what restrict the development of integral imaging, main including low spatial resolution, narrow depth range and small viewing angle. This paper summarizes the principle, characteristics and development history of the integral imaging. A variety of methods are compared and analyzed that how to improve the resolution, extend depth of field, increase scope and eliminate the artifact aiming at problems currently. And makes a discussion about the experimental results of the research, comparing the display performance of different methods.

Generation of transgene-free induced pluripotent stem cells with non-viral methods.

PubMed

Wang, Tao; Zhao, Hua-shan; Zhang, Qiu-ling; Xu, Chang-lin; Liu, Chang-bai

2013-03-01

Induced pluripotent stem (iPS) cells were originally generated from mouse fibroblasts by enforced expression of Yamanaka factors (Oct3/4, Sox2, Klf4, and c-Myc). The technique was quickly reproduced with human fibroblasts or mesenchymal stem cells. Although having been showed therapeutic potential in animal models of sickle cell anemia and Parkinson's disease, iPS cells generated by viral methods do not suit all the clinical applications. Various non-viral methods have appeared in recent years for application of iPS cells in cell transplantation therapy. These methods mainly include DNA vector-based approaches, transfection of mRNA, and transduction of reprogramming proteins. This review summarized these non-viral methods and compare the advantages, disadvantages, efficiency, and safety of these methods.

Structural model constructing for optical handwritten character recognition

NASA Astrophysics Data System (ADS)

Khaustov, P. A.; Spitsyn, V. G.; Maksimova, E. I.

2017-02-01

The article is devoted to the development of the algorithms for optical handwritten character recognition based on the structural models constructing. The main advantage of these algorithms is the low requirement regarding the number of reference images. The one-pass approach to a thinning of the binary character representation has been proposed. This approach is based on the joint use of Zhang-Suen and Wu-Tsai algorithms. The effectiveness of the proposed approach is confirmed by the results of the experiments. The article includes the detailed description of the structural model constructing algorithm’s steps. The proposed algorithm has been implemented in character processing application and has been approved on MNIST handwriting characters database. Algorithms that could be used in case of limited reference images number were used for the comparison.

Does the Culture of Modern Day Palliative Care Social Work Leave Room for Leadership?

PubMed Central

Davidson, Jason

2016-01-01

This paper describes research undertaken as part of an MA study in leadership. It draws on interviews with six high profile leaders at the fore front of end of life care sector in the UK. Its findings and emerging themes offer insights about the opportunities for social work leaders in palliative care in the future and how the profession and palliative care sector address current barriers to taking advantage of such opportunity. The main focus of this paper is leadership related to palliative care social work. However, it relates to much broader themes including the history, politics and culture of this profession and the requirements for leadership on the part of social work in the broader contexts of health and social care. PMID:27570357

Research on wastewater reuse planning in Beijing central region.

PubMed

Jia, H; Guo, R; Xin, K; Wang, J

2005-01-01

The need to implement wastewater reuse in Beijing is discussed. Based on the investigation of the built wastewater reuse projects in Beijing, the differences between small wastewater reuse system and large systems were analyzed according to the technical, economical and social issues. The advantages and disadvantages of the small system and the large system were then given. In wastewater reuse planning in Beijing urban region, the large system was adopted. The rations of reclaimed water for difference land use type, including industrial reuse, municipal reuse, grass irrigation, and scenes water reuse were determined. Then according to the land use information in every block in central Beijing, using GIS techniques, the amounts of the reclaimed water needed in every block were calculated, and the main pipe system of reclaimed water was planned.

Modelling of Microstructure Changes in Hot Deformed Materials Using Cellular Automata

NASA Astrophysics Data System (ADS)

Kuc, Dariusz; Gawąd, Jerzy

2011-01-01

The paper is focused on application of multi-scale 2D method. Model approach consists of Cellular Automata (CA) model of microstructure development and the finite element code to solve thermo-mechanical problem. Dynamic recrystallization phenomenon is taken into account in 2D CA model which takes advantage of explicit representation of microstructure, including individual grains and grain boundaries. Flow stress is the main material parameter in mechanical part of FE and is calculated on the basis of average dislocation density obtained from CA model. The results attained from the model were validated with the experimental data. In the present study, austenitic steel X3CrNi18-10 was investigated. The examination of microstructure for the initial and final microstructures was carried out, using light microscopy and transmission electron microscopy.

Closed Brayton Cycle power system with a high temperature pellet bed reactor heat source for NEP applications

NASA Technical Reports Server (NTRS)

Juhasz, Albert J.; El-Genk, Mohamed S.; Harper, William B., Jr.

1992-01-01

Capitalizing on past and future development of high temperature gas reactor (HTGR) technology, a low mass 15 MWe closed gas turbine cycle power system using a pellet bed reactor heating helium working fluid is proposed for Nuclear Electric Propulsion (NEP) applications. Although the design of this directly coupled system architecture, comprising the reactor/power system/space radiator subsystems, is presented in conceptual form, sufficient detail is included to permit an assessment of overall system performance and mass. Furthermore, an attempt is made to show how tailoring of the main subsystem design characteristics can be utilized to achieve synergistic system level advantages that can lead to improved reliability and enhanced system life while reducing the number of parasitic load driven peripheral subsystems.

[Impact of health care reform on human resources and employment management].

PubMed

Brito Quintana, P E

2000-01-01

According to those in charge of health sector reform, human resources are the key component of health sector reform processes and offer health services their greatest competitive advantage. With the help of the Observatory for Human Resources within Health Sector Reform promoted by the Pan American Health Organization and other groups, countries of the Region of the Americas have now begun to gather, in a methodical fashion, tangible evidence of the decisive importance of human resources within health sector reform initiatives and particularly of the impact of these initiatives on health personnel. This mutual influence is the main theme of this article, which explores the most disturbing aspects of health sector reform from a human resources perspective, including job instability and conflicting interests of employers and employees.

High refractive index Fresnel lens on a fiber fabricated by nanoimprint lithography for immersion applications.

PubMed

Koshelev, Alexander; Calafiore, Giuseppe; Piña-Hernandez, Carlos; Allen, Frances I; Dhuey, Scott; Sassolini, Simone; Wong, Edward; Lum, Paul; Munechika, Keiko; Cabrini, Stefano

2016-08-01

In this Letter, we present a Fresnel lens fabricated on the end of an optical fiber. The lens is fabricated using nanoimprint lithography of a functional high refractive index material, which is suitable for mass production. The main advantage of the presented Fresnel lens compared to a conventional fiber lens is its high refractive index (n=1.68), which enables efficient light focusing even inside other media, such as water or an adhesive. Measurement of the lens performance in an immersion liquid (n=1.51) shows a near diffraction limited focal spot of 810 nm in diameter at the 1/e² intensity level for a wavelength of 660 nm. Applications of such fiber lenses include integrated optics, optical trapping, and fiber probes.

Jagged Tiling for Intra-tile Parallelism and Fine-Grain Multithreading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shrestha, Sunil; Manzano Franco, Joseph B.; Marquez, Andres

In this paper, we have developed a novel methodology that takes into consideration multithreaded many-core designs to better utilize memory/processing resources and improve memory residence on tileable applications. It takes advantage of polyhedral analysis and transformation in the form of PLUTO, combined with a highly optimized finegrain tile runtime to exploit parallelism at all levels. The main contributions of this paper include the introduction of multi-hierarchical tiling techniques that increases intra tile parallelism; and a data-flow inspired runtime library that allows the expression of parallel tiles with an efficient synchronization registry. Our current implementation shows performance improvements on an Intelmore » Xeon Phi board up to 32.25% against instances produced by state-of-the-art compiler frameworks for selected stencil applications.« less

Polyphenols are medicine: Is it time to prescribe red wine for our patients?

PubMed Central

Cordova, Alfredo C; Sumpio, Bauer E

2009-01-01

Alcohol, specifically red wine, has been suggested to play a key role in the prevention of cardiovascular disease and other chronic pathologies, including cancer. Its regular and moderate consumption has been found in numerous epidemiological studies to correlate inversely with vascular disease and mortality, despite the presence of risk factors such as high consumption of saturated fats, elevated smoking and low physical activity. This phenomenon, known as the ‘French Paradox’, would be explained mainly by the high levels of polyphenols present in red wine, making it more advantageous than beer, spirits and even white wine. The habit of having one or two drinks of red wine every day with meals may translate to a longer, healthier and better quality of life. PMID:22477510

Data analysis considerations

USDA-ARS?s Scientific Manuscript database

For the last 30 years static chamber methodologies have been most commonly used to measure N2O fluxes from agricultural soils. The main advantages of this technique are that it is relatively inexpensive, versatile in the field, and the technology is very easy to adopt. Consequently, the majority of ...

Crystal Growth by Physical Vapor Transport: Experiments and Simulation Dynamics

NASA Technical Reports Server (NTRS)

Ramachandran, N.; Worlikar, A.; Su, Ching-Hua; Rose, M. Franklin (Technical Monitor)

2001-01-01

Crystal growth from the vapor phase has various advantages over melt growth. The main advantage is from a lower processing temperature, which makes the process more amenable in instances where the melting temperature of the crystal is high. Other benefits stem from the inherent purification mechanism in the process due to differences in the vapor pressures of the native elements and impurities, and the enhanced interfacial morphological stability during the growth process. Further, the implementation of PVT growth in closed ampoules affords experimental simplicity with minimal needs for complex process control, which makes it an ideal candidate for space investigations in systems where gravity tends to have undesirable effects on the growth process. Bulk growth of wide band gap II-VI semiconductors by PVT has been developed and refined over the past several years at NASA MSFC. A new modeling approach for PVT has also been recently formulated and its validation and testing is the main objective of this work.

Use of ultrasounds in the food industry-Methods and effects on quality, safety, and organoleptic characteristics of foods: A review.

PubMed

Arvanitoyannis, Ioannis S; Kotsanopoulos, Konstantinos V; Savva, Amalia G

2017-01-02

The use of ultrasounds has recently gained significant interest in the food industry mainly due to the new trends of consumers toward functional foods. Offering several advantages, this form of energy can be applied for the improvement of qualitative characteristics of high-quality foods as well as for assuring safety of a vast variety of foodstuffs, and at the same time minimizing any negative effects of the sensory characteristics of foods. Furthermore, the non-destructive nature of this technology offers several opportunities for the compositional analysis of foods. However, further research is required for the improvement of related techniques and the reduction of application costs in order to render this technology efficient for industrial use. This review paper covers the main applications of ultrasounds as well as several advantages of the use of the technology in combination with conventional techniques. The effects of ultrasounds on the characteristics, microbial safety, and quality of several foods are also detailed.

Ultrasound: a subexploited tool for sample preparation in metabolomics.

PubMed

Luque de Castro, M D; Delgado-Povedano, M M

2014-01-02

Metabolomics, one of the most recently emerged "omics", has taken advantage of ultrasound (US) to improve sample preparation (SP) steps. The metabolomics-US assisted SP step binomial has experienced a dissimilar development that has depended on the area (vegetal or animal) and the SP step. Thus, vegetal metabolomics and US assisted leaching has received the greater attention (encompassing subdisciplines such as metallomics, xenometabolomics and, mainly, lipidomics), but also liquid-liquid extraction and (bio)chemical reactions in metabolomics have taken advantage of US energy. Also clinical and animal samples have benefited from US assisted SP in metabolomics studies but in a lesser extension. The main effects of US have been shortening of the time required for the given step, and/or increase of its efficiency or availability for automation; nevertheless, attention paid to potential degradation caused by US has been scant or nil. Achievements and weak points of the metabolomics-US assisted SP step binomial are discussed and possible solutions to the present shortcomings are exposed. Copyright © 2013 Elsevier B.V. All rights reserved.

Performance investigations on modified vertical axis water turbine: Combination of lift and drag

NASA Astrophysics Data System (ADS)

Baumatary, Mithinga; Biswas, Angimitra; Misra, Rahul Dev

2018-04-01

Extracting energy from the water has been followed since decades due to environmental friendly. Now a days everyone is running after clean energy, therefore extracting energy from the water turbine is a good approach. The main idea of this study is to investigate the performance of a new design turbine which is a combination of the concepts of lift and drag turbine. The main purpose of the study is to accumulate maximum energy by considering advantages of two different types of turbine. The maximum coefficient of power is 0.141 at free stream velocity of 0.5 m/s. The modified new design turbine consist of straight section and the curve section. The length of the straight section influences the performance of the turbine. Investigation on the optimization of straight section has been carried out in this paper. As this type of turbine have opted the advantages of both lift and drag it has turned out to be fruitful.

Open Course Ware, Distance Education, and 21st Century Geoscience Education

NASA Astrophysics Data System (ADS)

Connors, M. G.

2010-12-01

Open Course Ware (OCW) allows the highest quality educational materials (including videos of lectures from the best classroom lecturers) to find a wide audience. This audience may include many who wish to obtain credentials for formal study yet who are unable to be campus-based students. This opens a role for formal, credentialed and accredited distance education (DE) to efficiently integrate OCW into DE courses. OCW materials will in this manner be able to be used for education of credential-seeking students who would not otherwise benefit from them. Modern presentation methods using the Internet and video (including mobile device) technologies may offer pedagogical advantages over even traditional classroom learning. A detailed analysis of the development of Athabasca University’s PHYS 302 Vibrations and Waves course (based mainly on MIT’s OCW), and application of lessons learned to development of PHYS 305 Electromagnetism is presented. These courses are relevant to the study of geophysics, but examples of GEOL (Geology) courses will also be mentioned, along with an broad overview of OCW resources in Geoscience.

Applications of natural zeolites on agriculture and food production.

PubMed

Eroglu, Nazife; Emekci, Mevlut; Athanassiou, Christos G

2017-08-01

Zeolites are crystalline hydrated aluminosilicates with remarkable physical and chemical properties, which include losing and receiving water in a reverse way, adsorbing molecules that act as molecular sieves, and replacing their constituent cations without structural change. The commercial production of natural zeolites has accelerated during the last 50 years. The Structure Commission of the International Zeolite Association recorded more than 200 zeolites, which currently include more than 40 naturally occurring zeolites. Recent findings have supported their role in stored-pest management as inert dust applications, pesticide and fertilizer carriers, soil amendments, animal feed additives, mycotoxin binders and food packaging materials. There are many advantages of inert dust application, including low cost, non-neurotoxic action, low mammalian toxicity and safety for human consumption. The latest consumer trends and government protocols have shifted toward organic origin materials to replace synthetic chemical products. In the present review, we summarize most of the main uses of zeolites in food and agruculture, along with the with specific paradigms that illustrate their important role. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Ocular sarcoidosis: new diagnostic modalities and treatment.

PubMed

Yang, Sung J; Salek, Sherveen; Rosenbaum, James T

2017-09-01

Ocular involvement in sarcoidosis is present in up to 80% of patients and is frequently manifested before diagnosis of the underlying systemic disease. Considering the therapeutic consequences, early diagnosis of the underlying disease is advantageous in patients presenting with ocular inflammation. There are several ocular findings suggestive of underlying sarcoidosis, such as granulomatous keratic precipitates, iris nodules, cells in the vitreous humor known as snowballs and snowbanks, and retinal periphlebitis. High suspicion is crucial for the diagnosis of sarcoidosis. This review on ocular sarcoidosis will mainly focus on new diagnostic and treatment modalities. Recent studies found possible new diagnostic indicators for the diagnosis of ocular sarcoidosis which include not only serum profiles but also vitreous sample analysis. Ophthalmologic imaging techniques have improved to investigate the ocular structure in detail. Results from recent uveitis clinical trials have included sarcoidosis as an underlying cause and have reported positive results. The diagnosis of ocular sarcoidosis can be challenging in some cases. High suspicion is important to diagnose ocular sarcoidosis with various laboratory and ophthalmic tools. There are many possible options for the treatment of ocular sarcoidosis including various biologic agents.

Occupational activity and cognitive reserve: implications in terms of prevention of cognitive aging and Alzheimer’s disease

PubMed Central

Adam, Stéphane; Bonsang, Eric; Grotz, Catherine; Perelman, Sergio

2013-01-01

This paper investigates the relationship between the concept of activity (including both professional and nonprofessional) and cognitive functioning among older European individuals. In this research, we used data collected during the first wave of SHARE (Survey on Health, Ageing and Retirement in Europe), and a measurement approach known as stochastic frontier analysis, derived from the economic literature. SHARE includes a large population (n > 25,000) geographically distributed across Europe, and analyzes several dimensions simultaneously, including physical and mental health activity. The main advantages of stochastic frontier analysis are that it allows estimation of parametric function relating cognitive scores and driving factors at the boundary and disentangles frontier noise and distance to frontier components, as well as testing the effect of potential factors on these distances simultaneously. The analysis reveals that all activities are positively related to cognitive functioning in elderly people. Our results are discussed in terms of prevention of cognitive aging and Alzheimer’s disease, and regarding the potential impact that some retirement programs might have on cognitive functioning in individuals across Europe. PMID:23671387

Electronic forces as descriptors of nucleophilic and electrophilic regioselectivity and stereoselectivity.

PubMed

Liu, Shubin; Rong, Chunying; Lu, Tian

2017-01-04

One of the main tasks of theoretical chemistry is to rationalize computational results with chemical insights. Key concepts of such nature include nucleophilicity, electrophilicity, regioselectivity, and stereoselectivity. While computational tools are available to predict barrier heights and other reactivity properties with acceptable accuracy, a conceptual framework to appreciate above quantities is still lacking. In this work, we introduce the electronic force as the fundamental driving force of chemical processes to understand and predict molecular reactivity. It has three components but only two are independent. These forces, electrostatic and steric, can be employed as reliable descriptors for nucleophilic and electrophilic regioselectivity and stereoselectivity. The advantages of using these forces to evaluate molecular reactivity are that electrophilic and nucleophilic attacks are featured by distinct characteristics in the electrostatic force and no knowledge of quantum effects included in the kinetic and exchange-correlation energies is required. Examples are provided to highlight the validity and general applicability of these reactivity descriptors. Possible applications in ambident reactivity, σ and π holes, frustrated Lewis pairs, and stereoselective reactions are also included in this work.

A Multi Agent Based Approach for Prehospital Emergency Management.

PubMed

Safdari, Reza; Shoshtarian Malak, Jaleh; Mohammadzadeh, Niloofar; Danesh Shahraki, Azimeh

2017-07-01

To demonstrate an architecture to automate the prehospital emergency process to categorize the specialized care according to the situation at the right time for reducing the patient mortality and morbidity. Prehospital emergency process were analyzed using existing prehospital management systems, frameworks and the extracted process were modeled using sequence diagram in Rational Rose software. System main agents were identified and modeled via component diagram, considering the main system actors and by logically dividing business functionalities, finally the conceptual architecture for prehospital emergency management was proposed. The proposed architecture was simulated using Anylogic simulation software. Anylogic Agent Model, State Chart and Process Model were used to model the system. Multi agent systems (MAS) had a great success in distributed, complex and dynamic problem solving environments, and utilizing autonomous agents provides intelligent decision making capabilities.  The proposed architecture presents prehospital management operations. The main identified agents are: EMS Center, Ambulance, Traffic Station, Healthcare Provider, Patient, Consultation Center, National Medical Record System and quality of service monitoring agent. In a critical condition like prehospital emergency we are coping with sophisticated processes like ambulance navigation health care provider and service assignment, consultation, recalling patients past medical history through a centralized EHR system and monitoring healthcare quality in a real-time manner. The main advantage of our work has been the multi agent system utilization. Our Future work will include proposed architecture implementation and evaluation of its impact on patient quality care improvement.

A Multi Agent Based Approach for Prehospital Emergency Management

PubMed Central

Safdari, Reza; Shoshtarian Malak, Jaleh; Mohammadzadeh, Niloofar; Danesh Shahraki, Azimeh

2017-01-01

Objective: To demonstrate an architecture to automate the prehospital emergency process to categorize the specialized care according to the situation at the right time for reducing the patient mortality and morbidity. Methods: Prehospital emergency process were analyzed using existing prehospital management systems, frameworks and the extracted process were modeled using sequence diagram in Rational Rose software. System main agents were identified and modeled via component diagram, considering the main system actors and by logically dividing business functionalities, finally the conceptual architecture for prehospital emergency management was proposed. The proposed architecture was simulated using Anylogic simulation software. Anylogic Agent Model, State Chart and Process Model were used to model the system. Results: Multi agent systems (MAS) had a great success in distributed, complex and dynamic problem solving environments, and utilizing autonomous agents provides intelligent decision making capabilities.  The proposed architecture presents prehospital management operations. The main identified agents are: EMS Center, Ambulance, Traffic Station, Healthcare Provider, Patient, Consultation Center, National Medical Record System and quality of service monitoring agent. Conclusion: In a critical condition like prehospital emergency we are coping with sophisticated processes like ambulance navigation health care provider and service assignment, consultation, recalling patients past medical history through a centralized EHR system and monitoring healthcare quality in a real-time manner. The main advantage of our work has been the multi agent system utilization. Our Future work will include proposed architecture implementation and evaluation of its impact on patient quality care improvement. PMID:28795061

[New-generation proton pump inhibitors: progress in the treatment of peptic acid diseases?].

PubMed

de Korwin, Jean-Dominique; Ducrotté, Philippe; Vallot, Thierry

2004-06-19

EFFECTS AND INCONVENIENCIES OF THE OLDER PRODUCTS: The proton pump inhibitors (PPIs) are now universally considered the treatment of choice for management of gastric-acid-related diseases, mainly gastro-oesophageal reflux disease (GERD). These drugs share similar properties: general structure, acid-activation step, covalent binding to the proton pump of the gastric parietal cell via the production of covalent disulphide bonds, relatively stable inhibition of H+,K+-ATPase. However, the older PPIs (omeprazole, lansoprazole et pantoprazole) have notable limitations. These drugs exhibit substantial interpatient variability and may have significant interactions with other drugs. These first-generation PPIs also do not achieve a rapid and sustained suppression of gastric acid, leading to the development of new acid-pump antagonists. The new-generation PPIs, esomeprazole and rabeprazole, offer several pharmacokinetic advantages: lower oxidative hepatic metabolism rate via the CYP 2C19 reducing the activity variations due to genetic polymorphisms and decreasing the risk of significant drug-drug interactions (advantages mainly for rabeprazole), lower metabolic clearance of esomeprazole (S-enantiomer of omeprazole) increasing plasma concentrations and acid suppression of this new PPI, higher accumulation of rabeprazole in the parietal cell due to its higher pKa. Gastric pH studies and therapeutic trials have demonstrated significant advantages of esomeprazole and rabeprazole compared with the older PPIs, which omeprazole is the prototype: a greater inhibition of acid secretion, a more rapid onset of action to provide reflux symptoms relief over 24 hours with lower GERD-related cost for rabeprazole, a sustained acid suppression, cost-effectiveness advantages for esomeprazole in the healing and maintenance of erosive esophagitis compared with lansoprazole, reduced potential for clinically significant drug-drug interactions with rabeprazole compared with omeprazole and esomeprazole. Due to their properties, esomeprazole and rabeprazole are the best candidates for "on demand" treatment of GERD.

TEM prospection on quaternary faults: the case of San Ramón Fault (SRF), Central Chile

NASA Astrophysics Data System (ADS)

Estay, N. P.; Yanez, G. A.; Maringue, J. I.

2016-12-01

Quaternary faults are relevant study objects in geosciences to better estimation of seismic risk. Nowadays main efforts are focused on the improvement of paleoseismology and geophysics techniques. At this regard, we present here a TEM prospection of the San Ramón quaternary fault in the southern Andes. This fault has no record of historic activation, however, given its proximity to the Chilean capital, hazardous estimate is mandatory. Evidences of the SRF are restricted to geomorphologic features, and associated secondary faults on the hanging wall block, but any outcrop of the main fault have been identified. To observe the main fault in the basement rock, cover by a 30-100 m sedimentary basin, we carried out a TEM experiment. The best advantage of the TEM methodology compared to other near-surface electrical methods is it capacity to reach greater penetration depth compared to its spatial sampling rate. Taking this advantage, we define a 25x25 m transmitter loop (Tx) and 5x5 m receiver loop (Rx), allowing the suitable resolution to observe the fault core. To reach a deeper penetration depth but keeping high resolution of the shallow parts, we made two complementary measurements, the first with one-turn transmitter loop, and the second with 4-turn transmitter loops, to resolve the early and late times properly. As result we define vertical profiles of 100-150m depth, and including 48 measures (24 of one-turn transmitter loop, and 24 of four-turn transmitter loop), the resulting pseudo 2D image is a 500m profile with depth extent of 150m. In this section we can observe different resistivity domain, with a horizontal continuity in many measures. The experiment allows to cross the sedimentary cover, and observe the top of the basement rock. In the rock domain, it can be observed a high resistivity body, interpreted as a pristine rock, and some extremely low resistivity bodies, that are interpreted as a fractured rock saturated with water, and eventually mapping a fossil/actual hydrothermal flow. These fractured zone is interpreted as the main trace of the fault. Finally, this TEM experiment allow to estimate the associated cumulative slip, as well as the fault geometry of the first 150m, useful for BEM or FEM seismic modeling.

Advantages and Disadvantages of Aquatic Plant Management Techniques

DTIC Science & Technology

2000-09-01

This report provides an overview of the environmental and practical advantages and disadvantages of the major aquatic plant management methods, including biological, chemical, mechanical, and physical control techniques.

State-of-the-evidence reviews: advantages and challenges of including grey literature.

PubMed

Benzies, Karen M; Premji, Shahirose; Hayden, K Alix; Serrett, Karen

2006-01-01

Increasingly, health policy decision-makers and professionals are turning to research-based evidence to support decisions about policy and practice. Systematic reviews are useful for gathering, summarizing, and synthesizing published and unpublished research about clearly defined interventions. State-of-the-evidence reviews are broader than traditional systematic reviews and may include not only published and unpublished research, but also published and unpublished non-research literature. Decisions about whether to include this "grey literature" in a review are challenging and lead to many questions about whether the advantages outweigh the challenges. The primary purpose of this article is to describe what constitutes grey literature, and methods to locate it and assess its quality. The secondary purpose is to discuss the core issues to consider when making decisions to include grey literature in a state-of-the-evidence review. A recent state-of-the-evidence review is used as an exemplar to present advantages and challenges related to including grey literature in a review. Despite the challenges, in the exemplar, inclusion of grey literature was useful to validate the results of a research-based literature search. Decisions about whether to include grey literature in a state-of-the-evidence review are complex. A checklist to assist in decision-making was created as a tool to assist the researcher in determining whether it is advantageous to include grey literature in a review.

Growing duckweed for biofuel production: a review.

PubMed

Cui, W; Cheng, J J

2015-01-01

Duckweed can be utilised to produce ethanol, butanol and biogas, which are promising alternative energy sources to minimise dependence on limited crude oil and natural gas. The advantages of this aquatic plant include high rate of nutrient (nitrogen and phosphorus) uptake, high biomass yield and great potential as an alternative feedstock for the production of fuel ethanol, butanol and biogas. The objective of this article is to review the published research on growing duckweed for the production of the biofuels, especially starch enrichment in duckweed plants. There are mainly two processes affecting the accumulation of starch in duckweed biomass: photosynthesis for starch generation and metabolism-related starch consumption. The cost of stimulating photosynthesis is relatively high based on current technologies. Considerable research efforts have been made to inhibit starch degradation. Future research need in this area includes duckweed selection, optimisation of duckweed biomass production, enhancement of starch accumulation in duckweeds and use of duckweeds for production of various biofuels. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

The serotonergic system in fish.

PubMed

Lillesaar, Christina

2011-07-01

Neurons using serotonin (5-HT) as neurotransmitter and/or modulator have been identified in the central nervous system in representatives from all vertebrate clades, including jawless, cartilaginous and ray-finned fishes. The aim of this review is to summarize our current knowledge about the anatomical organization of the central serotonergic system in fishes. Furthermore, selected key functions of 5-HT will be described. The main focus will be the adult brain of teleosts, in particular zebrafish, which is increasingly used as a model organism. It is used to answer not only genetic and developmental biology questions, but also issues concerning physiology, behavior and the underlying neuronal networks. The many evolutionary conserved features of zebrafish combined with the ever increasing number of genetic tools and its practical advantages promise great possibilities to increase our understanding of the serotonergic system. Further, comparative studies including several vertebrate species will provide us with interesting insights into the evolution of this important neurotransmitter system. Copyright © 2011 Elsevier B.V. All rights reserved.

A review of electrolyte materials and compositions for electrochemical supercapacitors.

PubMed

Zhong, Cheng; Deng, Yida; Hu, Wenbin; Qiao, Jinli; Zhang, Lei; Zhang, Jiujun

2015-11-07

Electrolytes have been identified as some of the most influential components in the performance of electrochemical supercapacitors (ESs), which include: electrical double-layer capacitors, pseudocapacitors and hybrid supercapacitors. This paper reviews recent progress in the research and development of ES electrolytes. The electrolytes are classified into several categories, including: aqueous, organic, ionic liquids, solid-state or quasi-solid-state, as well as redox-active electrolytes. Effects of electrolyte properties on ES performance are discussed in detail. The principles and methods of designing and optimizing electrolytes for ES performance and application are highlighted through a comprehensive analysis of the literature. Interaction among the electrolytes, electro-active materials and inactive components (current collectors, binders, and separators) is discussed. The challenges in producing high-performing electrolytes are analyzed. Several possible research directions to overcome these challenges are proposed for future efforts, with the main aim of improving ESs' energy density without sacrificing existing advantages (e.g., a high power density and a long cycle-life) (507 references).

Distributed Fiber-Optic Sensors for Vibration Detection

PubMed Central

Liu, Xin; Jin, Baoquan; Bai, Qing; Wang, Yu; Wang, Dong; Wang, Yuncai

2016-01-01

Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. Optical parameters such as light intensity, phase, polarization state, or light frequency will change when external vibration is applied on the sensing fiber. In this paper, various technologies of distributed fiber-optic vibration sensing are reviewed, from interferometric sensing technology, such as Sagnac, Mach–Zehnder, and Michelson, to backscattering-based sensing technology, such as phase-sensitive optical time domain reflectometer, polarization-optical time domain reflectometer, optical frequency domain reflectometer, as well as some combinations of interferometric and backscattering-based techniques. Their operation principles are presented and recent research efforts are also included. Finally, the applications of distributed fiber-optic vibration sensors are summarized, which mainly include structural health monitoring and perimeter security, etc. Overall, distributed fiber-optic vibration sensors possess the advantages of large-scale monitoring, good concealment, excellent flexibility, and immunity to electromagnetic interference, and thus show considerable potential for a variety of practical applications. PMID:27472334

Utilization of ground waste seashells in cement mortars for masonry and plastering.

PubMed

Lertwattanaruk, Pusit; Makul, Natt; Siripattarapravat, Chalothorn

2012-11-30

In this research, four types of waste seashells, including short-necked clam, green mussel, oyster, and cockle, were investigated experimentally to develop a cement product for masonry and plastering. The parameters studied included water demand, setting time, compressive strength, drying shrinkage and thermal conductivity of the mortars. These properties were compared with those of a control mortar that was made of a conventional Portland cement. The main parameter of this study was the proportion of ground seashells used as cement replacement (5%, 10%, 15%, or 20% by weight). Incorporation of ground seashells resulted in reduced water demand and extended setting times of the mortars, which are advantages for rendering and plastering in hot climates. All mortars containing ground seashells yielded adequate strength, less shrinkage with drying and lower thermal conductivity compared to the conventional cement. The results indicate that ground seashells can be applied as a cement replacement in mortar mixes and may improve the workability of rendering and plastering mortar. Copyright © 2012 Elsevier Ltd. All rights reserved.

Distributed Fiber-Optic Sensors for Vibration Detection.

PubMed

Liu, Xin; Jin, Baoquan; Bai, Qing; Wang, Yu; Wang, Dong; Wang, Yuncai

2016-07-26

Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. Optical parameters such as light intensity, phase, polarization state, or light frequency will change when external vibration is applied on the sensing fiber. In this paper, various technologies of distributed fiber-optic vibration sensing are reviewed, from interferometric sensing technology, such as Sagnac, Mach-Zehnder, and Michelson, to backscattering-based sensing technology, such as phase-sensitive optical time domain reflectometer, polarization-optical time domain reflectometer, optical frequency domain reflectometer, as well as some combinations of interferometric and backscattering-based techniques. Their operation principles are presented and recent research efforts are also included. Finally, the applications of distributed fiber-optic vibration sensors are summarized, which mainly include structural health monitoring and perimeter security, etc. Overall, distributed fiber-optic vibration sensors possess the advantages of large-scale monitoring, good concealment, excellent flexibility, and immunity to electromagnetic interference, and thus show considerable potential for a variety of practical applications.

3D Miniaturization of Human Organs for Drug Discovery.

PubMed

Park, Joseph; Wetzel, Isaac; Dréau, Didier; Cho, Hansang

2018-01-01

"Engineered human organs" hold promises for predicting the effectiveness and accuracy of drug responses while reducing cost, time, and failure rates in clinical trials. Multiorgan human models utilize many aspects of currently available technologies including self-organized spherical 3D human organoids, microfabricated 3D human organ chips, and 3D bioprinted human organ constructs to mimic key structural and functional properties of human organs. They enable precise control of multicellular activities, extracellular matrix (ECM) compositions, spatial distributions of cells, architectural organizations of ECM, and environmental cues. Thus, engineered human organs can provide the microstructures and biological functions of target organs and advantageously substitute multiscaled drug-testing platforms including the current in vitro molecular assays, cell platforms, and in vivo models. This review provides an overview of advanced innovative designs based on the three main technologies used for organ construction leading to single and multiorgan systems useable for drug development. Current technological challenges and future perspectives are also discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Internet and cardiovascular research: the present and its future potentials and limits.

PubMed

2002-03-01

The Internet and the World Wide Web have been proposed as tools to improve medical and cardiovascular research. These new technologies have been mainly applied to large-scale clinical trials, with the development of clinical-trial websites. They include tools for the management of some aspects of clinical trials, such as the dissemination of information on trial progress; randomisation and the monitoring processes; the distribution and accountability of study drugs; and remote data-entry. Several clinical-trial websites have been developed in the cardiovascular field over the last few years, but few have been designed to conduct trials fully online. Advantages of such systems include greater interaction between the coordinating centre and investigators, availability of a clean database in a short time, and cost reduction. Website developers need to take care of security issues and to use security tools (data encryption, firewalls, passwords and electronic signatures) in order to prevent unauthorised users from accessing the system and patient data.

The Treatment of Mid-shaft Clavicle Fractures

PubMed Central

Sang, Qing-Hua; Gou, Zhi-Gang; Zheng, Hua-Yong; Yuan, Jing-Tao; Zhao, Jian-Wen; He, Hong-Ying; Liu, Chuang; Liu, Zhi

2015-01-01

Objective: Through reviewing the relevant literature from the past decades, to summarize the assessment and management of fractures of the clavicle, and provide an overview of the clinical results of a range of treatment options. Data Sources: The data analyzed in this review are mainly from articles included in PubMed and EMBASE, published from 1960 to 2015. Study Selection: Studies involving assessment of fractures of the clavicle were reviewed. Further literatures were gathered regarding the conservative and surgical treatment of these fractures, including the methods of fixation and the surgical approaches used. Both conservative and surgical treatments were then compared and contrasted. Results: Through retrieving and reading the abstract, a total of 42 representative articles were selected, which covered all aspects of the conservative treatment and surgical treatment, and compared the advantages and disadvantages of different treatment options. Conclusions: Although the majority of recent data suggest that surgery may be more appropriate as it improves functional outcome and reduces the risk of complications, we recommend that the treatment should be individually assessed. PMID:26521795

Initial design and performance of the near surface unmanned aircraft system sensor suite in support of the GOES-R field campaign

NASA Astrophysics Data System (ADS)

Pearlman, Aaron J.; Padula, Francis; Shao, Xi; Cao, Changyong; Goodman, Steven J.

2016-09-01

One of the main objectives of the Geostationary Operational Environmental Satellite R-Series (GOES-R) field campaign is to validate the SI traceability of the Advanced Baseline Imager. The campaign plans include a feasibility demonstration study for new near surface unmanned aircraft system (UAS) measurement capability that is being developed to meet the challenges of validating geostationary sensors. We report our progress in developing our initial systems by presenting the design and preliminary characterization results of the sensor suite. The design takes advantage of off-the-shelf technologies and fiber-based optical components to make hemispheric directional measurements from a UAS. The characterization results - including laboratory measurements of temperature effects and polarization sensitivity - are used to refine the radiometric uncertainty budget towards meeting the validation objectives for the campaign. These systems will foster improved validation capabilities for the GOES-R field campaign and other next generation satellite systems.

The Structures & Properties of Carbon

ERIC Educational Resources Information Center

Castellini, Olivia M.; Lisensky, George C.; Ehrlich, Jennifer; Zenner, Greta M.; Crone, Wendy C.

2006-01-01

The four main forms of carbon--diamond, graphite, buckyballs, and carbon nanotubes (CNTs)--are an excellent vehicle for teaching fundamental principles of chemical bonding, material structure, and properties. Carbon atoms form a variety of structures that are intrinsically connected to the properties they exhibit. Educators can take advantage of…

Fluorous Compounds and their Role in Separation Chemistry

ERIC Educational Resources Information Center

Ubeda, Maria Angeles; Dembinski, Roman

2006-01-01

The main focus of fluorous chemistry targets resource and time-consuming separation, in order to improve the material economy and thus represents potentially environmentally friendly technology. Fluorous chemistry offers the advantage of easy separation based on different affirmatives of organics and fluorous molecules, where the process called…

SSME structural dynamic model development

NASA Technical Reports Server (NTRS)

Foley, M. J.; Tilley, D. M.; Welch, C. T.

1983-01-01

A mathematical model of the Space Shuttle Main Engine (SSME) as a complete assembly, with detailed emphasis on LOX and High Fuel Turbopumps is developed. The advantages of both complete engine dynamics, and high fidelity modeling are incorporated. Development of this model, some results, and projected applications are discussed.

What Medicare Covers

MedlinePlus

... your Medicare coverage — Original Medicare or a Medicare Advantage Plan (Part C). What Part A covers Medicare ... health plans cover Medicare health plans include Medicare Advantage, Medical Savings Account (MSA), Medicare Cost plans, PACE, ...

Performance of PZT8 Versus PZT4 Piezoceramic Materials in Ultrasonic Transducers

NASA Astrophysics Data System (ADS)

DeAngelis, Dominick A.; Schulze, Gary W.

PZT8 and PZT4 are the common "hard" piezoceramic materials used in power ultrasonic transducers (e.g., welding, cutting, sonar, etc.). PZT8 is perceived as the better choice for resonant devices, primarily due to its higher mechanical quality factor Qm. PZT8 is also considered a "harder" material compared to PZT4, since it has better stability at higher preloads and drive levels. Many transducer designers never consider PZT4 for their applications, even though it has clear advantages such as higher output (i.e., higher d33). Even the perceived advantage of PZT8 regarding Qm may not be significant for most Langevin, bolted stack type transducers if the mechanical joint losses dominate. This research is a case study on the performance of identical ultrasonic transducers used for semiconductor wire bonding, assembled with either PZT8 or PZT4 materials. The main purpose of the study is to establish rule-of-thumb transducer design guidelines for the selection of PZT8 versus PZT4 materials. Several metrics are investigated such as impedance, frequency, capacitance, dielectric loss, Qm, heating, displacement gain, and electro-mechanical coupling factor. The experimental and theoretical research methods include Bode plots, thermal IR camera imaging, scanning laser vibrometry and coupled-field finite element analysis.

A Retrospective Case Series of Carbon Fiber Plate Fixation of Ankle Fractures.

PubMed

Pinter, Zachariah W; Smith, Kenneth S; Hudson, Parke W; Jones, Caleb W; Hadden, Ryan; Elattar, Osama; Shah, Ashish

2018-06-01

Distal fibula fractures represent a common problem in orthopaedics. When fibula fractures require operative fixation, implants are typically made from stainless steel or titanium alloys. Carbon fiber implants have been used elsewhere in orthopaedics for years, and their advantages include a modulus of elasticity similar to that of bone, biocompatibility, increased fatigue strength, and radiolucency. This study hypothesized that carbon fiber plates would provide similar outcomes for ankle fracture fixation as titanium and steel implants. A retrospective chart review was performed of 30 patients who underwent fibular open reduction and internal fixation (ORIF). The main outcomes assessed were postoperative union rate and complication rate. The nonunion or failure rate for carbon fiber plates was 4% (1/24), and the union rate was 96% (23/24). The mean follow-up time was 20 months, and the complication rate was 8% (2/24). Carbon fiber plates are a viable alternative to metal plates in ankle fracture fixation, demonstrating union and complication rates comparable to those of traditional fixation techniques. Their theoretical advantages and similar cost make them an attractive implant choice for ORIF of the fibula. However, further studies are needed for extended follow-up and inclusion of larger patient cohorts. Level IV: Retrospective Case series.

Inversion of gravity gradient tensor data: does it provide better resolution?

NASA Astrophysics Data System (ADS)

Paoletti, V.; Fedi, M.; Italiano, F.; Florio, G.; Ialongo, S.

2016-04-01

The gravity gradient tensor (GGT) has been increasingly used in practical applications, but the advantages and the disadvantages of the analysis of GGT components versus the analysis of the vertical component of the gravity field are still debated. We analyse the performance of joint inversion of GGT components versus separate inversion of the gravity field alone, or of one tensor component. We perform our analysis by inspection of the Picard Plot, a Singular Value Decomposition tool, and analyse both synthetic data and gradiometer measurements carried out at the Vredefort structure, South Africa. We show that the main factors controlling the reliability of the inversion are algebraic ambiguity (the difference between the number of unknowns and the number of available data points) and signal-to-noise ratio. Provided that algebraic ambiguity is kept low and the noise level is small enough so that a sufficient number of SVD components can be included in the regularized solution, we find that: (i) the choice of tensor components involved in the inversion is not crucial to the overall reliability of the reconstructions; (ii) GGT inversion can yield the same resolution as inversion with a denser distribution of gravity data points, but with the advantage of using fewer measurement stations.

Assessment of vinyl polysiloxane as an innovative injection material for the anatomical study of vasculature.

PubMed

Dargaud, Jacques; Chalvet, Laurane; Del Corso, Marco; Cerboni, Elsa; Feugier, Patrick; Mertens, Patrick; Simon, Emile

2016-04-01

There are numerous injection materials for the study of vasculature in anatomical specimens, each having its own advantages and disadvantages. Latex and resins are the most widely used injection materials but need several days to set. The development of new materials taking shorter time to polymerize might be very useful to improve anatomic specimen study conditions. The aim of the present study was to evaluate vinyl polysiloxane (VPS), a silicon material widely used for dental impressions with the advantage to set very rapidly, as an injection material. We assessed the preparation, use, diffusion and setting time of the product in different anatomical regions (central nervous system, external carotid/jugular, lower limb) to observe its behavior in variably sized vessels. Our results suggest that VPS might be of interest for the study of vessels in anatomical specimens. The main strengths of the product are represented by (1) simplicity of use, as it is a ready-to-use material, (2) very rapid polymerization, (3) availability in a range of viscosities making easier the exploration of small vessels, (4) its better elasticity compared to resins, (5) and finally its availability in a range of colors making it a material of choice for vascular system dissections including those with very small caliber vessels.

A new strategy for complete identification of sea buckthorn cultivars by using random amplified polymorphic DNA markers.

PubMed

Yang, G; Ding, J; Wu, L R; Duan, Y D; Li, A Y; Shan, J Y; Wu, Y X

2015-03-13

DNA fingerprinting is both a popular and important technique with several advantages in plant cultivar identification. However, this technique has not been used widely and efficiently in practical plant identification because the analysis and recording of data generated from fingerprinting and genotyping are tedious and difficult. We developed a novel approach known as a cultivar identification diagram (CID) strategy that uses DNA markers to separate plant individuals in a more efficient, practical, and referable manner. A CID was manually constructed and a polymorphic marker was generated from each polymerase chain reaction for sample separation. In this study, 67 important sea buckthorn cultivars cultivated in China were successfully separated with random amplified polymorphic DNA markers using the CID analysis strategy, with only seven 11-nucleotide primers employed. The utilization of the CID of these 67 sea buckthorn cultivars was verified by identifying 2 randomly chosen groups of cultivars among the 67 cultivars. The main advantages of this identification strategy include fewer primers used and separation of all cultivars using the corresponding primers. This sea buckthorn CID was able to separate any sea buckthorn cultivars among the 67 studied, which is useful for sea buckthorn cultivar identification, cultivar-right-protection, and for the sea buckthorn nursery industry in China.

An update clinical application of amniotic fluid-derived stem cells (AFSCs) in cancer cell therapy and tissue engineering.

PubMed

Gholizadeh-Ghaleh Aziz, Shiva; Fathi, Ezzatollah; Rahmati-Yamchi, Mohammad; Akbarzadeh, Abolfazl; Fardyazar, Zahra; Pashaiasl, Maryam

2017-06-01

Recent studies have elucidated that cell-based therapies are promising for cancer treatments. The human amniotic fluid stem (AFS) cells are advantageous cells for such therapeutic schemes that can be innately changed to express therapeutic proteins. HAFSCs display a natural tropism to cancer cells in vivo. They can be useful in cancer cells targeting. Moreover, they are easily available from surplus diagnostic samples during pregnancy and less ethical and legal concern are associated with the collection and application than other putative cells are subjected. This review will designate representatives of amniotic fluid and stem cell derived from amniotic fluid. For this propose, we collect state of human AFS cells data applicable in cancer therapy by dividing this approach into two main classes (nonengineered and engineered based approaches). Our study shows the advantage of AFS cells over other putative cells types in terms differentiation ability to a wide range of cells by potential and effective use in preclinical studies for a variety of diseases. This study has shown the elasticity of human AFS cells and their favorable potential as a multipotent cell source for regenerative stem cell therapy and capable of giving rise to multiple lineages including such as osteoblasts and adipocyte.

APD in the developing world: is there a future?

PubMed

Correa-Rotter, Ricardo

2002-01-01

Automated peritoneal dialysis (APD) has experienced significant growth in highly developed nations in the last few years, while in developing countries with important social, educational, and financial constraints this treatment modality is, at best, trying to emerge. APD offers advantages that make it popular. Some of these advantages include increased adequacy for some patient groups, enhanced patient well-being and positive changes in lifestyle, as well as a reduction in peritonitis rates attributed to fewer connect-disconnect procedures. The development of APD in developing nations has been very poor mainly due to educational and financial constraints. APD growth as a treatment modality in the developing world requires multiple approaches, some of them general and others related to the specific needs of each nation. There is a need to develop APD research projects and pilot programs to demonstrate the benefits for specific subpopulations. In addition, the development of research and industry-market strategies directed at reducing costs related to this form of treatment are required. The relatively low use of APD in developing nations is primarily influenced by nonmedical factors. Given the financial and educational constraints, APD programs may need to be directed toward specific subpopulations such as young working adults, individuals who require assistance to perform procedures, or patients who require an increased dialysis dose in order to reach adequate clearances.

Qualitative study of the impact of an authentic electronic portfolio in undergraduate medical education.

PubMed

Belcher, Rosie; Jones, Anna; Smith, Laura-Jane; Vincent, Tim; Naidu, Sindhu Bhaarrati; Montgomery, Julia; Haq, Inam; Gill, Deborah

2014-12-17

Portfolios are increasingly used in undergraduate and postgraduate medical education. Four medical schools have collaborated with an established NHS electronic portfolio provider to develop and implement an authentic professional electronic portfolio for undergraduate students. We hypothesized that using an authentic portfolio would have significant advantages for students, particularly in familiarizing them with the tool many will continue to use for years after graduation. This paper describes the early evaluation of this undergraduate portfolio at two participating medical schools. To gather data, a questionnaire survey with extensive free text comments was used at School 1, and three focus groups were held at School 2. This paper reports thematic analysis of students' opinions expressed in the free text comments and focus groups. Five main themes, common across both schools were identified. These concerned the purpose, use and acceptability of the portfolio, advantages of and barriers to the use of the portfolio, and the impacts on both learning and professional identity. An authentic portfolio mitigated some of the negative aspects of using a portfolio, and had a positive effect on students' perception of themselves as becoming past of the profession. However, significant barriers to portfolio use remained, including a lack of understanding of the purpose of a portfolio and a perceived damaging effect on feedback.

[Sentinel node in melanoma and breast cancer. Current considerations].

PubMed

Vidal-Sicart, S; Vilalta Solsona, A; Alonso Vargas, M I

2015-01-01

The main objectives of sentinel node (SN) biopsy is to avoid unnecessary lymphadenectomies and to identify the 20-25% of patients with occult regional metastatic involvement. This technique reduces the associated morbidity from lymphadenectomy and increases the occult lymphatic metastases identification rate by offering the pathologist the or those lymph nodes with the highest probability of containing metastatic cells. Pre-surgical lymphoscintigraphy is considered a "road map" to guide the surgeon towards the sentinel nodes and to localize unpredictable lymphatic drainage patterns. The SPECT/CT advantages include a better SN detection rate than planar images, the ability to detect SNs in difficult to interpret studies, better SN depiction, especially in sites closer to the injection site and better anatomic localization. These advantages may result in a change in the patient's clinical management both in melanoma and breast cancer. The correct SN evaluation by pathology implies a tumoral load stratification and further prognostic implication. The use of intraoperative imaging devices allows the surgeon a better surgical approach and precise SN localization. Several studies reports the added value of such devices for more sentinel nodes excision and a complete monitoring of the whole procedure. New techniques, by using fluorescent or hybrid tracers, are currently being developed. Copyright © 2014 Elsevier España, S.L.U. and SEMNIM. All rights reserved.

Laser-Based Lighting: Experimental Analysis and Perspectives

PubMed Central

Yushchenko, Maksym; Buffolo, Matteo; Meneghini, Matteo; Zanoni, Enrico

2017-01-01

This paper presents an extensive analysis of the operating principles, theoretical background, advantages and limitations of laser-based lighting systems. In the first part of the paper we discuss the main advantages and issues of laser-based lighting, and present a comparison with conventional LED-lighting technology. In the second part of the paper, we present original experimental data on the stability and reliability of phosphor layers for laser lighting, based on high light-intensity and high-temperature degradation tests. In the third part of the paper (for the first time) we present a detailed comparison between three different solutions for laser lighting, based on (i) transmissive phosphor layers; (ii) a reflective/angled phosphor layer; and (iii) a parabolic reflector, by discussing the advantages and drawbacks of each approach. The results presented within this paper can be used as a guideline for the development of advanced lighting systems based on laser diodes. PMID:29019958

Experience and prospects of oil shale utilization for power production in Russia

NASA Astrophysics Data System (ADS)

Potapov, O. P.

2016-09-01

Due to termination of work at the Leningrad Shale Deposit, the Russian shale industry has been liquidated, including not only shale mining and processing but also research and engineering (including design) activities, because this deposit was the only commercially operated complex in Russia. UTT-3000 plants with solid heat carrier, created mainly by the Russian specialists under scientific guidance of members of Krzhizhanovsky Power Engineering Institute, passed under the control of Estonian engineers, who, alongside with their operation in Narva, construct similar plants in Kohtla-Jarve, having renamed the Galoter Process into the Enifit or Petroter. The main idea of this article is to substantiate the expediency of revival of the oil shale industry in Russia. Data on the UTT-3000 plants' advantages, shale oils, and gas properties is provided. Information on investments in an UTT-3000 plant and estimated cost of Leningrad oil shale mining at the Mezhdurechensk Strip Mine is given. For more detailed technical and economic assessment of construction of a complex for oil shale extraction and processing, it is necessary to develop a feasibility study, which should be the first stage of this work. Creation of such a complex will make it possible to produce liquid and gaseous power fuel from oil shale of Leningrad Deposit and provide the opportunity to direct for export the released volumes of oil and gas for the purposes of Russian budget currency replenishment.

National direct-drive program on OMEGA and the National Ignition Facility

NASA Astrophysics Data System (ADS)

Goncharov, V. N.; Regan, S. P.; Campbell, E. M.; Sangster, T. C.; Radha, P. B.; Myatt, J. F.; Froula, D. H.; Betti, R.; Boehly, T. R.; Delettrez, J. A.; Edgell, D. H.; Epstein, R.; Forrest, C. J.; Glebov, V. Yu; Harding, D. R.; Hu, S. X.; Igumenshchev, I. V.; Marshall, F. J.; McCrory, R. L.; Michel, D. T.; Seka, W.; Shvydky, A.; Stoeckl, C.; Theobald, W.; Gatu-Johnson, M.

2017-01-01

A major advantage of the laser direct-drive (DD) approach to ignition is the increased fraction of laser drive energy coupled to the hot spot and relaxed hot-spot requirements for the peak pressure and convergence ratios relative to the indirect-drive approach at equivalent laser energy. With the goal of a successful ignition demonstration using DD, the recently established national strategy has several elements and involves multiple national and international institutions. These elements include the experimental demonstration on OMEGA cryogenic implosions of hot-spot conditions relevant for ignition at MJ-scale energies available at the National Ignition Facility (NIF) and developing an understanding of laser-plasma interactions and laser coupling using DD experiments on the NIF. DD designs require reaching central stagnation pressures in excess of 100 Gbar. The current experiments on OMEGA have achieved inferred peak pressures of 56 Gbar (Regan et al 2016 Phys. Rev. Lett. 117 025001). Extensive analysis of the cryogenic target experiments and two- and three-dimensional simulations suggest that power balance, target offset, and target quality are the main limiting factors in target performance. In addition, cross-beam energy transfer (CBET) has been identified as the main mechanism reducing laser coupling. Reaching the goal of demonstrating hydrodynamic equivalence on OMEGA includes improving laser power balance, target position, and target quality at shot time. CBET must also be significantly reduced and several strategies have been identified to address this issue.

Space manufacturing in the construction of solar power satellites

NASA Astrophysics Data System (ADS)

Ruth, J.; Westphal, W.

This paper deals with ongoing research work concerning energy budget and cost of the solar Satellite Power System (SPS). The fundamental model of such a total system including ground and space facilities, transportation vehicles, power satellites and rectennas is presented. The main purpose of this model is to examine the applicability of different construction scenarios to allow comparison under nearly identical constraints. Using this model in a first attempt the blankets—meaning the main part of the space segment by weight, energy investment needs and cost—are chosen representatively for the energy and cost comparison of two construction alternatives of the same SPS concept. These construction alternatives are defined just by ground and space based manufacturing of the solar blankets, while all other subsystems, operations and the transportation profiles are considered to be kept the same. It can be shown that the energy "payback" time does not only depend on the SPS concept selected but also very much on the construction and implementation scenario. The cost comparison of these alternative approaches presents not very significant differences but advantages for the space manufacturing option with potential higher differences for a less conservative approach which may apply benefits of space manufacturing meaning, for example, considerable mass savings in space. Some preliminary results are discussed and an outlook is given over the next steps to be investigated, comprising the extension of the fundamental model to include use of lunar raw materials.

Nanophotonic lab-on-a-chip platforms including novel bimodal interferometers, microfluidics and grating couplers.

PubMed

Duval, Daphné; González-Guerrero, Ana Belén; Dante, Stefania; Osmond, Johann; Monge, Rosa; Fernández, Luis J; Zinoviev, Kirill E; Domínguez, Carlos; Lechuga, Laura M

2012-05-08

One of the main limitations for achieving truly lab-on-a-chip (LOC) devices for point-of-care diagnosis is the incorporation of the "on-chip" detection. Indeed, most of the state-of-the-art LOC devices usually require complex read-out instrumentation, losing the main advantages of portability and simplicity. In this context, we present our last advances towards the achievement of a portable and label-free LOC platform with highly sensitive "on-chip" detection by using nanophotonic biosensors. Bimodal waveguide interferometers fabricated by standard silicon processes have been integrated with sub-micronic grating couplers for efficient light in-coupling, showing a phase resolution of 6.6 × 10(-4)× 2π rad and a limit of detection of 3.3 × 10(-7) refractive index unit (RIU) in bulk. A 3D network of SU-8 polymer microfluidics monolithically assembled at the wafer-level was included, ensuring perfect sealing and compact packaging. To overcome some of the drawbacks inherent to interferometric read-outs, a novel all-optical wavelength modulation system has been implemented, providing a linear response and a direct read-out of the phase variation. Sensitivity, specificity and reproducibility of the wavelength modulated BiMW sensor has been demonstrated through the label-free immunodetection of the human hormone hTSH at picomolar level using a reliable biofunctionalization process.

NASA Program of Airborne Optical Observations.

PubMed

Bader, M; Wagoner, C B

1970-02-01

NASA's Ames Research Center currently operates a Convair 990 four-engine jet transport as a National Facility for airborne scientific research (astronomy, aurora, airglow, meteorology, earth resources). This aircraft can carry about twelve experiments to 12 km for several hours. A second aircraft, a twin-engine Lear Jet, has been used on a limited basis for airborne science and can carry one experiment to 15 km for 1 h. Mobility and altitude are the principal advantages over ground sites, while large payload and personnel carrying capabilities, combined with ease of operations and relatively low cost, are the main advantages compared to balloons, rockets, or satellites. Typical airborne instrumentation and scientific results are presented.

Technology Assessment Need: Review on Attractiveness and Competitiveness

NASA Astrophysics Data System (ADS)

Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

2017-06-01

Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

Optical sensors based on plastic fibers.

PubMed

Bilro, Lúcia; Alberto, Nélia; Pinto, João L; Nogueira, Rogério

2012-01-01

The recent advances of polymer technology allowed the introduction of plastic optical fiber in sensor design. The advantages of optical metrology with plastic optical fiber have attracted the attention of the scientific community, as they allow the development of low-cost or cost competitive systems compared with conventional technologies. In this paper, the current state of the art of plastic optical fiber technology will be reviewed, namely its main characteristics and sensing advantages. Several measurement techniques will be described, with a strong focus on interrogation approaches based on intensity variation in transmission and reflection. The potential applications involving structural health monitoring, medicine, environment and the biological and chemical area are also presented.

Electromagnetic Levitation of a Disc

ERIC Educational Resources Information Center

Valle, R.; Neves, F.; de Andrade, R., Jr.; Stephan, R. M.

2012-01-01

This paper presents a teaching experiment that explores the levitation of a disc of ferromagnetic material in the presence of the magnetic field produced by a single electromagnet. In comparison to the classical experiment of the levitation of a sphere, the main advantage of the proposed laboratory bench is that the uniform magnetic field…

78 FR 67467 - Registration of Municipal Advisors

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... the Exchange Act. These rules and forms are designed to give effect to provisions of Title IX of the... ``investment strategies'' in the final rule is designed to address the main concerns raised by these commenters... state, and provide tax advantages designed to encourage saving for future college costs.\\54\\ 529 Savings...

A Systematic Approach to Simulating Metabolism in Computational Toxicology. I. The Times Heuristic Modeling Framework

EPA Science Inventory

This paper presents a new system for automated 2D-3D migration of chemicals in large databases with conformer multiplication. The main advantages of this system are its straightforward performance, reasonable execution time, simplicity, and applicability to building large 3D che...

The Use of Multiple Slate Devices to Support Active Reading Activities

ERIC Educational Resources Information Center

Chen, Nicholas Yen-Cherng

2012-01-01

Reading activities in the classroom and workplace occur predominantly on paper. Since existing electronic devices do not support these reading activities as well as paper, users have difficulty taking full advantage of the affordances of electronic documents. This dissertation makes three main contributions toward supporting active reading…

Experiential Education: The Main Dish, Not Just a Side Course.

ERIC Educational Resources Information Center

Jacobs, Jeff

This paper advocates experiential education to help students actively engage in learning and transfer learning beyond the classroom. The characteristics and advantages of experiential education also provide educators with a more rewarding and enriching teaching experience. Typically, experiential education is viewed as an enhancement to more…

A Half-Time Mill School. Bulletin, 1919, No. 6

ERIC Educational Resources Information Center

Foght, H. W.

1919-01-01

Until a few years ago the Southern States were considered in the main an agricultural section. More recently the advantageous location in respect to raw materials, minerals, water, and electric power of the South Atlantic States has occasioned an almost unprecedented growth in manufacturing industries. Particularly has the cotton manufacturing…

Active optical cable for intrasatellite communications

NASA Astrophysics Data System (ADS)

Blasco, J.; Cano, D.; Navasquillo, O.; Esteban, M. A.

2017-11-01

DAS Photonics and Airbus Defence and Space (Spain) have been working for more than six years in the concept of an Active Optical Cable (AOC) for copper cable substitution. The main advantages that AOC offers are significant mass and size saving, better flexibility and routing of the cable and immunity to EMI.

Maine Leading Initiative for Multistate Tech. Buys

ERIC Educational Resources Information Center

Cavanagh, Sean

2013-01-01

A group of states has joined forces to arrange the purchase of an unusually comprehensive set of educational-technology devices and services, in a compact that could foreshadow other cooperative efforts by state and local governments attempting to turn the digital-procurement process to their advantage. The initial partners in the multistate…

Open Space Communities

Treesearch

Rachel Kaplan; Maureen E. Austin; Stephen Kaplan; Stephen Kaplan

2004-01-01

Though the concept is often left undefined, "open space" in residential areas is generally viewed as an asset. Duany et al. (2000), for example, suggest that "the generous provision of open space" offers the "main advantage" of suburbs over the city (p. 31). With forest, field, and farm steadily giving way to development, many communities...

Deterrence Theory: Success or Failure in Arab-Israeli Wars?

DTIC Science & Technology

1995-10-01

dis- play. To convince a challenger that the defender has a certain fundamen- tal advantage, a human resource capability for example, and that short...Yehoshua Raviv , Dayan’s military adjutant at the time, these were the main obstacles to an interim agreement. See Shamir, Egypt Under Sadat, 250

Cognitive Rather than Emotional Modification in Peace Education Programs: Advantages and Limitations

ERIC Educational Resources Information Center

Yablon, Yaacov Boaz

2007-01-01

Contact intervention programs are being used as the main vehicle to enhance positive relationships between conflict groups. Current research seeks to reveal the force driving processes that lead to positive contact between conflict groups, and points to the importance of emotional modification. Acknowledging the centrality of emotional…

The Carpeted Library.

ERIC Educational Resources Information Center

Garrett, Joe B.

The two main advantages for using carpeting are noise control and low maintenance costs. Carpet reduces floor instigated or impact noises and is psychologically dignifying. Maintenance costs for carpet are less than for other types of floor coverings because carpet requires less surface preparation. The initial cost of carpet is little, if any,…

A range-free method to determine antoine vapor-pressure heat transfer-related equation coefficients using the Boubaker polynomial expansion scheme

NASA Astrophysics Data System (ADS)

Koçak, H.; Dahong, Z.; Yildirim, A.

2011-05-01

In this study, a range-free method is proposed in order to determine the Antoine constants for a given material (salicylic acid). The advantage of this method is mainly yielding analytical expressions which fit different temperature ranges.

Trends in the Teaching of Typewriting

ERIC Educational Resources Information Center

Meehan, James R.

1977-01-01

Topics discussed include the cost advantages of electric versus manual typewriters, the advantages of teaching with electric typewriters, copying and typewriting, computers and typewriting, standardization of typewriting style, and word processing and typewriting. (TA)

Approaches to achieve high-level heterologous protein production in plants.

PubMed

Streatfield, Stephen J

2007-01-01

Plants offer an alternative to microbial fermentation and animal cell cultures for the production of recombinant proteins. For protein pharmaceuticals, plant systems are inherently safer than native and even recombinant animal sources. In addition, post-translational modifications, such as glycosylation, which cannot be achieved with bacterial fermentation, can be accomplished using plants. The main advantage foreseen for plant systems is reduced production costs. Plants should have a particular advantage for proteins produced in bulk, such as industrial enzymes, for which product pricing is low. In addition, edible plant tissues are well suited to the expression of vaccine antigens and pharmaceuticals for oral delivery. Three approaches have been followed to express recombinant proteins in plants: expression from the plant nuclear genome; expression from the plastid genome; and expression from plant tissues carrying recombinant plant viral sequences. The most important factor in moving plant-produced heterologous proteins from developmental research to commercial products is to ensure competitive production costs, and the best way to achieve this is to boost expression. Thus, considerable research effort has been made to increase the amount of recombinant protein produced in plants. This research includes molecular technologies to increase replication, to boost transcription, to direct transcription in tissues suited for protein accumulation, to stabilize transcripts, to optimize translation, to target proteins to subcellular locations optimal for their accumulation, and to engineer proteins to stabilize them. Other methods include plant breeding to increase transgene copy number and to utilize germplasm suited to protein accumulation. Large-scale commercialization of plant-produced recombinant proteins will require a combination of these technologies.

Interpreting the Possible Ecological Role(s) of Cyanotoxins: Compounds for Competitive Advantage and/or Physiological Aide?

PubMed Central

Holland, Aleicia; Kinnear, Susan

2013-01-01

To date, most research on freshwater cyanotoxin(s) has focused on understanding the dynamics of toxin production and decomposition, as well as evaluating the environmental conditions that trigger toxin production, all with the objective of informing management strategies and options for risk reduction. Comparatively few research studies have considered how this information can be used to understand the broader ecological role of cyanotoxin(s), and the possible applications of this knowledge to the management of toxic blooms. This paper explores the ecological, toxicological, and genetic evidence for cyanotoxin production in natural environments. The possible evolutionary advantages of toxin production are grouped into two main themes: That of “competitive advantage” or “physiological aide”. The first grouping illustrates how compounds produced by cyanobacteria may have originated from the need for a cellular defence mechanism, in response to grazing pressure and/or resource competition. The second grouping considers the contribution that secondary metabolites make to improved cellular physiology, through benefits to homeostasis, photosynthetic efficiencies, and accelerated growth rates. The discussion also includes other factors in the debate about possible evolutionary roles for toxins, such as different modes of exposures and effects on non-target (i.e., non-competitive) species. The paper demonstrates that complex and multiple factors are at play in driving evolutionary processes in aquatic environments. This information may provide a fresh perspective on managing toxic blooms, including the need to use a “systems approach” to understand how physico-chemical conditions, as well biological stressors, interact to trigger toxin production. PMID:23807545

Applying Spatial Audio to Human Interfaces: 25 Years of NASA Experience

NASA Technical Reports Server (NTRS)

Begault, Durand R.; Wenzel, Elizabeth M.; Godfrey, Martine; Miller, Joel D.; Anderson, Mark R.

2010-01-01

From the perspective of human factors engineering, the inclusion of spatial audio within a human-machine interface is advantageous from several perspectives. Demonstrated benefits include the ability to monitor multiple streams of speech and non-speech warning tones using a cocktail party advantage, and for aurally-guided visual search. Other potential benefits include the spatial coordination and interaction of multimodal events, and evaluation of new communication technologies and alerting systems using virtual simulation. Many of these technologies were developed at NASA Ames Research Center, beginning in 1985. This paper reviews examples and describes the advantages of spatial sound in NASA-related technologies, including space operations, aeronautics, and search and rescue. The work has involved hardware and software development as well as basic and applied research.

Leaf Phenological Characters of Main Tree Species in Urban Forest of Shenyang

PubMed Central

Xu, Sheng; Xu, Wenduo; Chen, Wei; He, Xingyuan; Huang, Yanqing; Wen, Hua

2014-01-01

Background Plant leaves, as the main photosynthetic organs and the high energy converters among primary producers in terrestrial ecosystems, have attracted significant research attention. Leaf lifespan is an adaptive characteristic formed by plants to obtain the maximum carbon in the long-term adaption process. It determines important functional and structural characteristics exhibited in the environmental adaptation of plants. However, the leaf lifespan and leaf characteristics of urban forests were not studied up to now. Methods By using statistic, linear regression methods and correlation analysis, leaf phenological characters of main tree species in urban forest of Shenyang were observed for five years to obtain the leafing phenology (including leafing start time, end time, and duration), defoliating phenology (including defoliation start time, end time, and duration), and the leaf lifespan of the main tree species. Moreover, the relationships between temperature and leafing phenology, defoliating phenology, and leaf lifespan were analyzed. Findings The timing of leafing differed greatly among species. The early leafing species would have relatively early end of leafing; the longer it took to the end of leafing would have a later time of completed leafing. The timing of defoliation among different species varied significantly, the early defoliation species would have relatively longer duration of defoliation. If the mean temperature rise for 1°C in spring, the time of leafing would experience 5 days earlier in spring. If the mean temperature decline for 1°C, the time of defoliation would experience 3 days delay in autumn. Interpretation There is significant correlation between leaf longevity and the time of leafing and defoliation. According to correlation analysis and regression analysis, there is significant correlation between temperature and leafing and defoliation phenology. Early leafing species would have a longer life span and consequently have advantage on carbon accumulation compared with later defoliation species. PMID:24963625

Limitations and requirements of content-based multimedia authentication systems

NASA Astrophysics Data System (ADS)

Wu, Chai W.

2001-08-01

Recently, a number of authentication schemes have been proposed for multimedia data such as images and sound data. They include both label based systems and semifragile watermarks. The main requirement for such authentication systems is that minor modifications such as lossy compression which do not alter the content of the data preserve the authenticity of the data, whereas modifications which do modify the content render the data not authentic. These schemes can be classified into two main classes depending on the model of image authentication they are based on. One of the purposes of this paper is to look at some of the advantages and disadvantages of these image authentication schemes and their relationship with fundamental limitations of the underlying model of image authentication. In particular, we study feature-based algorithms which generate an authentication tag based on some inherent features in the image such as the location of edges. The main disadvantage of most proposed feature-based algorithms is that similar images generate similar features, and therefore it is possible for a forger to generate dissimilar images that have the same features. On the other hand, the class of hash-based algorithms utilizes a cryptographic hash function or a digital signature scheme to reduce the data and generate an authentication tag. It inherits the security of digital signatures to thwart forgery attacks. The main disadvantage of hash-based algorithms is that the image needs to be modified in order to be made authenticatable. The amount of modification is on the order of the noise the image can tolerate before it is rendered inauthentic. The other purpose of this paper is to propose a multimedia authentication scheme which combines some of the best features of both classes of algorithms. The proposed scheme utilizes cryptographic hash functions and digital signature schemes and the data does not need to be modified in order to be made authenticatable. Several applications including the authentication of images on CD-ROM and handwritten documents will be discussed.

Galactic rings revisited - I. CVRHS classifications of 3962 ringed galaxies from the Galaxy Zoo 2 Database

NASA Astrophysics Data System (ADS)

Buta, Ronald J.

2017-11-01

Rings are important and characteristic features of disc-shaped galaxies. This paper is the first in a series that re-visits galactic rings with the goals of further understanding the nature of the features and for examining their role in the secular evolution of galaxy structure. The series begins with a new sample of 3962 galaxies drawn from the Galaxy Zoo 2 citizen science data base, selected because zoo volunteers recognized a ring-shaped pattern in the morphology as seen in Sloan Digital Sky Survey colour images. The galaxies are classified within the framework of the Comprehensive de Vaucouleurs revised Hubble-Sandage system. It is found that zoo volunteers cued on the same kinds of ring-like features that were recognized in the 1995 Catalogue of Southern Ringed Galaxies. This paper presents the full catalogue of morphological classifications, comparisons with other sources of classifications and some histograms designed mainly to highlight the content of the catalogue. The advantages of the sample are its large size and the generally good quality of the images; the main disadvantage is the low physical resolution that limits the detectability of linearly small rings such as nuclear rings. The catalogue includes mainly inner and outer disc rings and lenses. Cataclysmic (`encounter-driven') rings (such as ring and polar ring galaxies) are recognized in less than 1 per cent of the sample.

Management of reforming of housing-and-communal services

NASA Astrophysics Data System (ADS)

Skripnik, Oksana

2017-10-01

The international experience of reforming of housing and communal services is considered. The main scientific and methodical approaches of system transformation of the housing sphere are analyzed in the article. The main models of reforming are pointed out, interaction of participants of structural change process from the point of view of their commercial and social importance is characterized, advantages and shortcomings are revealed, model elements of the reform transformations from the point of view of the formation of investment appeal, competitiveness, energy efficiency and social importance of the carried-out actions are allocated.

A reliable, fast and low cost maximum power point tracker for photovoltaic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enrique, J.M.; Andujar, J.M.; Bohorquez, M.A.

This work presents a new maximum power point tracker system for photovoltaic applications. The developed system is an analog version of the ''P and O-oriented'' algorithm. It maintains its main advantages: simplicity, reliability and easy practical implementation, and avoids its main disadvantages: inaccurateness and relatively slow response. Additionally, the developed system can be implemented in a practical way at a low cost, which means an added value. The system also shows an excellent behavior for very fast variables in incident radiation levels. (author)

[Suprapubic urinary diversion using Cystofix--an alternative to the urethral indwelling catheter].

PubMed

Müller, J; Sulmoni, M

1992-01-01

Suprapubic Cystofix-cystostomy is a valuable alternative to the Foley-catheter. The advantages of suprapubic cystostomy are mainly a reduction of urinary tract infections, inflammatory reactions in the lower urinary tract and avoidance of late urethral strictures after transurethral catheterism. There are a few contraindications to be considered, mainly an empty bladder and coagulation disorders. The complication rate of suprapubic Cystofix-cystostomy, usually gross haematuria, is very low. Cystofix-cystostomy is as useful for short term urinary drainage as for long term drainage in the case of chronic voiding disorders.

Main-chain supramolecular block copolymers.

PubMed

Yang, Si Kyung; Ambade, Ashootosh V; Weck, Marcus

2011-01-01

Block copolymers are key building blocks for a variety of applications ranging from electronic devices to drug delivery. The material properties of block copolymers can be tuned and potentially improved by introducing noncovalent interactions in place of covalent linkages between polymeric blocks resulting in the formation of supramolecular block copolymers. Such materials combine the microphase separation behavior inherent to block copolymers with the responsiveness of supramolecular materials thereby affording dynamic and reversible materials. This tutorial review covers recent advances in main-chain supramolecular block copolymers and describes the design principles, synthetic approaches, advantages, and potential applications.

Photosymbiosis and the expansion of shallow-water corals

PubMed Central

Frankowiak, Katarzyna; Wang, Xingchen T.; Sigman, Daniel M.; Gothmann, Anne M.; Kitahara, Marcelo V.; Mazur, Maciej; Meibom, Anders; Stolarski, Jarosław

2016-01-01

Roughly 240 million years ago (Ma), scleractinian corals rapidly expanded and diversified across shallow marine environments. The main driver behind this evolution is uncertain, but the ecological success of modern reef-building corals is attributed to their nutritional symbiosis with photosynthesizing dinoflagellate algae. We show that a suite of exceptionally preserved Late Triassic (ca. 212 Ma) coral skeletons from Antalya (Turkey) have microstructures, carbonate 13C/12C and 18O/16O, and intracrystalline skeletal organic matter 15N/14N all indicating symbiosis. This includes species with growth forms conventionally considered asymbiotic. The nitrogen isotopes further suggest that their Tethys Sea habitat was a nutrient-poor, low-productivity marine environment in which photosymbiosis would be highly advantageous. Thus, coral-dinoflagellate symbiosis was likely a key driver in the evolution and expansion of shallow-water scleractinians. PMID:27847868

Precipitate statistics in an Al-Mg-Si-Cu alloy from scanning precession electron diffraction data

NASA Astrophysics Data System (ADS)

Sunde, J. K.; Paulsen, Ø.; Wenner, S.; Holmestad, R.

2017-09-01

The key microstructural feature providing strength to age-hardenable Al alloys is nanoscale precipitates. Alloy development requires a reliable statistical assessment of these precipitates, in order to link the microstructure with material properties. Here, it is demonstrated that scanning precession electron diffraction combined with computational analysis enable the semi-automated extraction of precipitate statistics in an Al-Mg-Si-Cu alloy. Among the main findings is the precipitate number density, which agrees well with a conventional method based on manual counting and measurements. By virtue of its data analysis objectivity, our methodology is therefore seen as an advantageous alternative to existing routines, offering reproducibility and efficiency in alloy statistics. Additional results include improved qualitative information on phase distributions. The developed procedure is generic and applicable to any material containing nanoscale precipitates.

Tocilizumab (Actemra).

PubMed

Sheppard, Martin; Laskou, Faidra; Stapleton, Philip P; Hadavi, Shahryar; Dasgupta, Bhaskar

2017-09-02

Tocilizumab (TCZ), is a recombinant humanized anti-interleukin-6 receptor (IL-6R) monoclonal antibody which has a main use in the treatment of rheumatoid arthritis, systemic juvenile idiopathic arthritis (sJIA) and polyarticular juvenile idiopathic arthritis (pJIA). This article provides an overview of TCZ including looking into the past at the discovery of interleukin-6 (IL-6) as a pro-inflammatory cytokine. It also looks at how tocilizumab was developed, manufactured and tested to ensure both safety and efficacy in a human population. The article then explores the advantages and disadvantages of using TCZ when compared to other biologics approved in RA, sJIA and pJIA and finally looks ahead to the future and the emerging role of IL-6 and its blockade by TCZ as a treatment for giant cell arteritis (GCA), polymyalgia rheumatica (PMR) and large vessel vasculitis (LVV).

The Weibull probabilities analysis on the single kenaf fiber

NASA Astrophysics Data System (ADS)

Ibrahim, I.; Sarip, S.; Bani, N. A.; Ibrahim, M. H.; Hassan, M. Z.

2018-05-01

Kenaf fiber has a great potential to be replaced with the synthetic composite due to their advantages such as environmentally friendly and outstanding performance. However, the main issue of this natural fiber that to be used in structural composite is inconsistency of their mechanical properties. Here, the influence of the gage length on the mechanical properties of single kenaf fiber was evaluated. This fiber was tested using the Universal testing machine at a loading rate of 1mm per min following ASTM D3822 standard. In this study, the different length of treated fiber including 20, 30 and 40mm were being tested. Following, Weibull probabilities analysis was used to characterize the tensile strength and Young modulus of kenaf fiber. The predicted average tensile strength from this approach is in good agreement with experimental results for the obtained parameter.

Review of functional near-infrared spectroscopy in neurorehabilitation

PubMed Central

Mihara, Masahito; Miyai, Ichiro

2016-01-01

Abstract. We provide a brief overview of the research and clinical applications of near-infrared spectroscopy (NIRS) in the neurorehabilitation field. NIRS has several potential advantages and shortcomings as a neuroimaging tool and is suitable for research application in the rehabilitation field. As one of the main applications of NIRS, we discuss its application as a monitoring tool, including investigating the neural mechanism of functional recovery after brain damage and investigating the neural mechanisms for controlling bipedal locomotion and postural balance in humans. In addition to being a monitoring tool, advances in signal processing techniques allow us to use NIRS as a therapeutic tool in this field. With a brief summary of recent studies investigating the clinical application of NIRS using motor imagery task, we discuss the possible clinical usage of NIRS in brain–computer interface and neurofeedback. PMID:27429995

Development of laser transmission system

NASA Astrophysics Data System (ADS)

Song, Jiawu; Zhang, Yulan; Yang, Jiandong; Zhang, Xinming

1998-08-01

This paper discusses a light transfer system of therapeutic machine using carbon-dioxide laser. This system is based on imitating human being arm motion principle, consists of optical cardans mainly and can move in three-D space freely. Through it carbon-dioxide laser (which wavelength is 10.6 micrometer) is reflected, focused or diverged and transferred to the different therapeutic part of body to realize the purpose of cutting operation, gasification, cauterization and irradiation. This system includes an indicating system using He-Ne laser, by which carbon-dioxide laser can arrive therapeutic part accurately. This system possesses some advantages e.g. an accurate transfer, large moving range, small power consumption, high power density and easy operation. At present the occupancy in home market of this kind laser transfer system products is over 95%. Some products have been exported to other countries.

Computational methods for evaluation of cell-based data assessment--Bioconductor.

PubMed

Le Meur, Nolwenn

2013-02-01

Recent advances in miniaturization and automation of technologies have enabled cell-based assay high-throughput screening, bringing along new challenges in data analysis. Automation, standardization, reproducibility have become requirements for qualitative research. The Bioconductor community has worked in that direction proposing several R packages to handle high-throughput data including flow cytometry (FCM) experiment. Altogether, these packages cover the main steps of a FCM analysis workflow, that is, data management, quality assessment, normalization, outlier detection, automated gating, cluster labeling, and feature extraction. Additionally, the open-source philosophy of R and Bioconductor, which offers room for new development, continuously drives research and improvement of theses analysis methods, especially in the field of clustering and data mining. This review presents the principal FCM packages currently available in R and Bioconductor, their advantages and their limits. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Advances of studies on new technology and method for identifying traditional Chinese medicinal materials].

PubMed

Chen, Shilin; Guo, Baolin; Zhang, Guijun; Yan, Zhuyun; Luo, Guangming; Sun, Suqin; Wu, Hezhen; Huang, Linfang; Pang, Xiaohui; Chen, Jianbo

2012-04-01

In this review, the authors summarized the new technologies and methods for identifying traditional Chinese medicinal materials, including molecular identification, chemical identification, morphological identification, microscopic identification and identification based on biological effects. The authors introduced the principle, characteristics, application and prospect on each new technology or method and compared their advantages and disadvantages. In general, new methods make the result more objective and accurate. DNA barcoding technique and spectroscopy identification have their owner obvious strongpoint in universality and digitalization. In the near future, the two techniques are promising to be the main trend for identifying traditional Chinese medicinal materials. The identification techniques based on microscopy, liquid chromatography, PCR, biological effects and DNA chip will be indispensable supplements. However, the bionic identification technology is just placed in the developing stage at present.

Nonlinear adaptive control system design with asymptotically stable parameter estimation error

NASA Astrophysics Data System (ADS)

Mishkov, Rumen; Darmonski, Stanislav

2018-01-01

The paper presents a new general method for nonlinear adaptive system design with asymptotic stability of the parameter estimation error. The advantages of the approach include asymptotic unknown parameter estimation without persistent excitation and capability to directly control the estimates transient response time. The method proposed modifies the basic parameter estimation dynamics designed via a known nonlinear adaptive control approach. The modification is based on the generalised prediction error, a priori constraints with a hierarchical parameter projection algorithm, and the stable data accumulation concepts. The data accumulation principle is the main tool for achieving asymptotic unknown parameter estimation. It relies on the parametric identifiability system property introduced. Necessary and sufficient conditions for exponential stability of the data accumulation dynamics are derived. The approach is applied in a nonlinear adaptive speed tracking vector control of a three-phase induction motor.

Hybrid microneedles devices for diagnostic and therapeutic applications: fabrication and preliminary results

NASA Astrophysics Data System (ADS)

Dardano, P.; Caliò, A.; Politi, J.; Di Palma, V.; Bevilacqua, M. F.; Rea, I.; Casalino, M.; Di Matteo, A.; Rendina, I.; De Stefano, L.

2015-06-01

Microneedles are newly developed biomedical devices, whose advantages are mainly in the non-invasiveness, discretion and versatility of use both as diagnostics and as therapeutics tool. In fact, they can be used both for drugs delivery in the interstitial fluids and for the analysis of the interstitial fluid. In this work we present the preliminary results for two devices based on micro needles in PolyEthylene (Glycol). The first for the drugs delivery includes a membrane whose optical reflected wavelength is related to the concentration of drug. Here, we present our preliminary result in diffusion of drugs between the membrane and the microneedles. The second device is gold coated and it works as electrode for the electrochemical detection of species in the interstitial fluid. A preliminary result in detection of glucose will be shown.

Folded Resonant Horns for Power Ultrasonic Applications

NASA Technical Reports Server (NTRS)

Sherrit, Stewart; Askins, Stephen; Gradziel, Michael; Bao, Xiaoqi; Chang, Zensheu; Dolgin, Benjamin; Bar-Cohen, Yoseph; Peterson, Tom

2003-01-01

Folded horns have been conceived as alternatives to straight horns used as resonators and strain amplifiers in power ultrasonic systems. Such systems are used for cleaning, welding, soldering, cutting, and drilling in a variety of industries. In addition, several previous NASA Tech Briefs articles have described instrumented drilling, coring, and burrowing machines that utilize combinations of sonic and ultrasonic vibrational actuation. The main advantage of a folded horn, relative to a straight horn of the same resonance frequency, is that the folded horn can be made shorter (that is, its greatest linear dimension measured from the outside can be made smaller). Alternatively, for a given length, the resonance frequency can be reduced. Hence, the folded-horn concept affords an additional degree of design freedom for reducing the length of an ultrasonic power system that includes a horn.

Infrared thermography in the architectural field.

PubMed

Meola, Carosena

2013-01-01

Infrared thermography is becoming ever more popular in civil engineering/architecture mainly due to its noncontact character which includes two great advantages. On one side, it prevents the object, under inspection, from any alteration and this is worthwhile especially in the presence of precious works of art. On the other side, the personnel operate in a remote manner far away from any hazard and this complies well with safety at work regulations. What is more, it offers the possibility to quickly inspect large surfaces such as the entire facade of a building. This paper would be an overview of the use of infrared thermography in the architectural and civil engineering field. First, some basic testing procedures are described, and then some key examples are presented owing to both laboratory tests and applications in situ spanning from civil habitations to works of art and archaeological sites.

Recent advances in bioprinting techniques: approaches, applications and future prospects.

PubMed

Li, Jipeng; Chen, Mingjiao; Fan, Xianqun; Zhou, Huifang

2016-09-20

Bioprinting technology shows potential in tissue engineering for the fabrication of scaffolds, cells, tissues and organs reproducibly and with high accuracy. Bioprinting technologies are mainly divided into three categories, inkjet-based bioprinting, pressure-assisted bioprinting and laser-assisted bioprinting, based on their underlying printing principles. These various printing technologies have their advantages and limitations. Bioprinting utilizes biomaterials, cells or cell factors as a "bioink" to fabricate prospective tissue structures. Biomaterial parameters such as biocompatibility, cell viability and the cellular microenvironment strongly influence the printed product. Various printing technologies have been investigated, and great progress has been made in printing various types of tissue, including vasculature, heart, bone, cartilage, skin and liver. This review introduces basic principles and key aspects of some frequently used printing technologies. We focus on recent advances in three-dimensional printing applications, current challenges and future directions.

Survey of foreign maglev systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, J.L.; Rote, D.M.; Coffey, H.T.

1992-07-01

Magnetic levitation (maglev) transportation systems represent an innovative technology that promises to provide pollution-free, contact-free, high-speed ground transportation for the twenty-first century. Great interest in maglev systems has been developing in the United States over the past two years under the auspices of the US National Maglev Initiative. The objective of the survey presented in this report is to provide the US maglev community with information on various maglev concepts that were developed in foreign countries over the past two decades. The main maglev systems included in the survey are the German Transrapid series and the M-Bahn, the Japanese HSSTmore » and MLU series, and the British Birmingham. Each maglev system is introduced and discussed according to its type, historical development, unique features, current status, and future prospects. Advantages and disadvantages of each system are briefly noted.« less

Three-dimensional bio-printing.

PubMed

Gu, Qi; Hao, Jie; Lu, YangJie; Wang, Liu; Wallace, Gordon G; Zhou, Qi

2015-05-01

Three-dimensional (3D) printing technology has been widely used in various manufacturing operations including automotive, defence and space industries. 3D printing has the advantages of personalization, flexibility and high resolution, and is therefore becoming increasingly visible in the high-tech fields. Three-dimensional bio-printing technology also holds promise for future use in medical applications. At present 3D bio-printing is mainly used for simulating and reconstructing some hard tissues or for preparing drug-delivery systems in the medical area. The fabrication of 3D structures with living cells and bioactive moieties spatially distributed throughout will be realisable. Fabrication of complex tissues and organs is still at the exploratory stage. This review summarize the development of 3D bio-printing and its potential in medical applications, as well as discussing the current challenges faced by 3D bio-printing.

4-Hydroxyphenylpyruvate Dioxygenase Inhibitors: From Chemical Biology to Agrochemicals.

PubMed

Ndikuryayo, Ferdinand; Moosavi, Behrooz; Yang, Wen-Chao; Yang, Guang-Fu

2017-10-04

The development of new herbicides is receiving considerable attention to control weed biotypes resistant to current herbicides. Consequently, new enzymes are always desired as targets for herbicide discovery. 4-Hydroxyphenylpyruvate dioxygenase (HPPD, EC 1.13.11.27) is an enzyme engaged in photosynthetic activity and catalyzes the transformation of 4-hydroxyphenylpyruvic acid (HPPA) into homogentisic acid (HGA). HPPD inhibitors constitute a promising area of discovery and development of innovative herbicides with some advantages, including excellent crop selectivity, low application rates, and broad-spectrum weed control. HPPD inhibitors have been investigated for agrochemical interests, and some of them have already been commercialized as herbicides. In this review, we mainly focus on the chemical biology of HPPD, discovery of new potential inhibitors, and strategies for engineering transgenic crops resistant to current HPPD-inhibiting herbicides. The conclusion raises some relevant gaps for future research directions.

From near-infrared and Raman to surface-enhanced Raman spectroscopy: progress, limitations and perspectives in bioanalysis.

PubMed

Dumont, Elodie; De Bleye, Charlotte; Sacré, Pierre-Yves; Netchacovitch, Lauranne; Hubert, Philippe; Ziemons, Eric

2016-05-01

Over recent decades, spreading environmental concern entailed the expansion of green chemistry analytical tools. Vibrational spectroscopy, belonging to this class of analytical tool, is particularly interesting taking into account its numerous advantages such as fast data acquisition and no sample preparation. In this context, near-infrared, Raman and mainly surface-enhanced Raman spectroscopy (SERS) have thus gained interest in many fields including bioanalysis. The two former techniques only ensure the analysis of concentrated compounds in simple matrices, whereas the emergence of SERS improved the performances of vibrational spectroscopy to very sensitive and selective analyses. Complex SERS substrates were also developed enabling biomarker measurements, paving the way for SERS immunoassays. Therefore, in this paper, the strengths and weaknesses of these techniques will be highlighted with a focus on recent progress.

Applications of graph theory in protein structure identification

PubMed Central

2011-01-01

There is a growing interest in the identification of proteins on the proteome wide scale. Among different kinds of protein structure identification methods, graph-theoretic methods are very sharp ones. Due to their lower costs, higher effectiveness and many other advantages, they have drawn more and more researchers’ attention nowadays. Specifically, graph-theoretic methods have been widely used in homology identification, side-chain cluster identification, peptide sequencing and so on. This paper reviews several methods in solving protein structure identification problems using graph theory. We mainly introduce classical methods and mathematical models including homology modeling based on clique finding, identification of side-chain clusters in protein structures upon graph spectrum, and de novo peptide sequencing via tandem mass spectrometry using the spectrum graph model. In addition, concluding remarks and future priorities of each method are given. PMID:22165974

Design of a Micro Cable Tunnel Inspection Robot

NASA Astrophysics Data System (ADS)

Song, Wei; Liu, Lei; Zhou, Xiaolong; Wang, Chengjiang

2016-11-01

As the ventilation system in cable tunnel is not perfect and the environment is closed, it is easy to accumulate toxic and harmful gas. It is a serious threat to the life safety of inspection staff. Therefore, a micro cable tunnel inspection robot is designed. The whole design plan mainly includes two parts: mechanical structure design and control system design. According to the functional requirements of the tunnel inspection robot, a wheel arm structure with crawler type is proposed. Some sensors are used to collect temperature, gas and image and transmit the information to the host computer in real time. The result shows the robot with crawler wheel arm structure has the advantages of small volume, quick action and high performance-price ratio. Besides, it has high obstacle crossing and avoidance ability and can adapt to a variety of complex cable tunnel environment.

Positioning navigation and timing service applications in cyber physical systems

NASA Astrophysics Data System (ADS)

Qu, Yi; Wu, Xiaojing; Zeng, Lingchuan

2017-10-01

The positioning navigation and timing (PNT) architecture was discussed in detail, whose history, evolvement, current status and future plan were presented, main technologies were listed, advantages and limitations of most technologies were compared, novel approaches were introduced, and future capacities were sketched. The concept of cyber-physical system (CPS) was described and their primary features were interpreted. Then the three-layer architecture of CPS was illustrated. Next CPS requirements on PNT services were analyzed, including requirements on position reference and time reference, requirements on temporal-spatial error monitor, requirements on dynamic services, real-time services, autonomous services, security services and standard services. Finally challenges faced by PNT applications in CPS were concluded. The conclusion was expected to facilitate PNT applications in CPS, and furthermore to provide references to the design and implementation of both architectures.

A comprehensive review of the implementation of hazard analysis critical control point (HACCP) to the production of flour and flour-based products.

PubMed

Arvanitoyannis, Ioannis S; Traikou, Athina

2005-01-01

The production of flour and semolina and their ensuing products, such as bread, cake, spaghetti, noodles, and corn flakes, is of major importance, because these products constitute some of the main ingredients of the human diet. The Hazard Analysis Critical Control Point (HACCP) system aims at ensuring the safety of these products. HACCP has been implemented within the frame of this study on various products of both Asian and European origin; the hazards, critical control limits (CCLs), observation practices, and corrective actions have been summarized in comprehensive tables. Furthermore, the various production steps, packaging included, were thoroughly analyzed, and reference was made to both the traditional and new methodologies in an attempt to pinpoint the occurring differences (advantages and disadvantages) per process.

Model Selection for Monitoring CO2 Plume during Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

2014-12-31

The model selection method developed as part of this project mainly includes four steps: (1) assessing the connectivity/dynamic characteristics of a large prior ensemble of models, (2) model clustering using multidimensional scaling coupled with k-mean clustering, (3) model selection using the Bayes' rule in the reduced model space, (4) model expansion using iterative resampling of the posterior models. The fourth step expresses one of the advantages of the method: it provides a built-in means of quantifying the uncertainty in predictions made with the selected models. In our application to plume monitoring, by expanding the posterior space of models, the finalmore » ensemble of representations of geological model can be used to assess the uncertainty in predicting the future displacement of the CO2 plume. The software implementation of this approach is attached here.« less

Recent Application of Solid Phase Based Techniques for Extraction and Preconcentration of Cyanotoxins in Environmental Matrices.

PubMed

Mashile, Geaneth Pertunia; Nomngongo, Philiswa N

2017-03-04

Cyanotoxins are toxic and are found in eutrophic, municipal, and residential water supplies. For this reason, their occurrence in drinking water systems has become a global concern. Therefore, monitoring, control, risk assessment, and prevention of these contaminants in the environmental bodies are important subjects associated with public health. Thus, rapid, sensitive, selective, simple, and accurate analytical methods for the identification and determination of cyanotoxins are required. In this paper, the sampling methodologies and applications of solid phase-based sample preparation methods for the determination of cyanotoxins in environmental matrices are reviewed. The sample preparation techniques mainly include solid phase micro-extraction (SPME), solid phase extraction (SPE), and solid phase adsorption toxin tracking technology (SPATT). In addition, advantages and disadvantages and future prospects of these methods have been discussed.

The Blind Advantage: How Going Blind Made Me a Stronger Principal and How Including Children with Disabilities Made Our School Better for Everyone

ERIC Educational Resources Information Center

Henderson, Bill

2011-01-01

'The Blind Advantage" provides insight into the challenges, possibilities, and practicalities of including students with disabilities--and into the mind and heart of an inspired and determined leader. "You should get out of education." That was the advice first-year teacher Bill Henderson received when he discovered he was gradually…

Molecular markers in disease detection and follow-up of patients with non-muscle invasive bladder cancer.

PubMed

Maas, Moritz; Walz, Simon; Stühler, Viktoria; Aufderklamm, Stefan; Rausch, Steffen; Bedke, Jens; Stenzl, Arnulf; Todenhöfer, Tilman

2018-05-01

Diagnosis and surveillance of non-muscle invasive bladder cancer (NMIBC) is mainly based on endoscopic bladder evaluation and urine cytology. Several assays for determining additional molecular markers (urine-, tissue- or blood-based) have been developed in recent years but have not been included in clinical guidelines so far. Areas covered: This review gives an update on different molecular markers in the urine and evaluates their role in patients with NMIBC in disease detection and surveillance. Moreover, the potential of recent approaches such as DNA methylation assays, multi-panel RNA gene expression assays and cell-free DNA analysis is assessed. Expert commentary: Most studies on various molecular urine markers have mainly focused on a potential replacement of cystoscopy. New developments in high throughput technologies and urine markers may offer further advantages as they may represent a non-invasive approach for molecular characterization of the disease. This opens new options for individualized surveillance strategies and may help to choose the best therapeutic option. The implementation of these technologies in well-designed clinical trials is essential to further promote the use of urine diagnostics in the management of patients with NMIBC.

[Minimally invasive surgery and the economics of it. Can minimally invasive surgery be cost efficient from a business point of view?].

PubMed

Ritz, J P; Stufler, M; Buhr, H J

2007-06-01

Minimally invasive surgery (MIS) is now accepted as equally valid as the use of a standard access in some areas of surgery. It is not possible to decide whether this access is economically worthwhile and if so for whom without a full economic cost-benefit analysis, which must take account of the hospital's own characteristics in addition to the cost involved for surgery, staff, infrastructure and administration. In summary, the main economic advantage of MIS lies in the patient-related early postoperative results, while the main disadvantage is that the operative material costs are higher. At present, the payment made for each procedure performed under the DRG system includes 14-17% of the total cost for materials, regardless of the access route and of the technical sophistication of the operation. The actual material costs are greater by a factor of 2-50 for MIS than for a conventional procedure. The task of the hospital is thus to lower the costs for material and infrastructure; that of industry is to offer less expensive alternatives; and that of our politicians, to implement better remuneration of the material costs.

Computational Analysis of Advanced Shape-Memory Alloy Devices Through a Robust Modeling Framework

NASA Astrophysics Data System (ADS)

Scalet, Giulia; Conti, Michele; Auricchio, Ferdinando

2017-06-01

Shape-memory alloys (SMA) provide significant advantages in various industrial fields, but their manufacturing and commercialization are currently hindered. This is attributed mainly to the poor knowledge of material behavior and the lack of standards in its mechanical characterization. SMA products are usually developed by trial-and-error testing to address specific design requirements, thus increasing costs and time. The development of simulation tools offers a possible solution to assist engineers and designers and allows to better understand SMA transformation phenomena. Accordingly, the purpose of the present paper is to numerically analyze and predict the response of spring-like actuators and septal occluders, which are industrial components exploiting the shape-memory and pseudoelastic properties of SMAs, respectively. The methodology includes two main stages: the implementation of the three-dimensional phenomenological model known as Souza- Auricchio model and the finite element modeling of the device. A discussion about the steps of each stage, as parameter identification and model generalizations, is provided. Validation results are presented through a comparison with the results of a performed experimental campaign. The framework proves good prediction capabilities and allows to reduce the number of experimental tests in the future.

A brief review of moxifloxacin in the treatment of elderly patients with community-acquired pneumonia (CAP)

PubMed Central

Ferrara, Anna M

2007-01-01

Community-acquired pneumonia (CAP) remains a common cause of morbidity and a potentially life-threatening illness throughout the world mainly in elderly patients. Initial antibacterial treatment, usually empirical, should be as effective as possible in order to assure rapid clinical resolution and reduce high rates of hospitalization and mortality especially affecting aged patients. New fluoroquinolones with potent activity against the most important respiratory pathogens including Streptococcus pneumoniae, a key pathogen mainly in old patients with CAP, have been recently suggested by several international guidelines as monotherapy for the treatment of most CAP patient categories. Among newer derivatives, moxifloxacin, an advanced generation 8-methoxy quinolone, has demonstrated good clinical and bacteriological efficacy in large, well designed clinical trials both in adults and old patients with CAP, achieving also in aged people efficacy comparable with that of standard treatments. Good pharmacokinetic characteristics such as excellent penetration into respiratory tract tissues and fluids, optimal bioavailability, simplicity of once-daily dosing, and good tolerability, represent potential advantages of moxifloxacin over other therapies. In addition, primarily due to a shorter length of hospital stay, moxifloxacin has been shown to save costs compared with standard therapy. PMID:18044134

Method validation for chemical composition determination by electron microprobe with wavelength dispersive spectrometer

NASA Astrophysics Data System (ADS)

Herrera-Basurto, R.; Mercader-Trejo, F.; Muñoz-Madrigal, N.; Juárez-García, J. M.; Rodriguez-López, A.; Manzano-Ramírez, A.

2016-07-01

The main goal of method validation is to demonstrate that the method is suitable for its intended purpose. One of the advantages of analytical method validation is translated into a level of confidence about the measurement results reported to satisfy a specific objective. Elemental composition determination by wavelength dispersive spectrometer (WDS) microanalysis has been used over extremely wide areas, mainly in the field of materials science, impurity determinations in geological, biological and food samples. However, little information is reported about the validation of the applied methods. Herein, results of the in-house method validation for elemental composition determination by WDS are shown. SRM 482, a binary alloy Cu-Au of different compositions, was used during the validation protocol following the recommendations for method validation proposed by Eurachem. This paper can be taken as a reference for the evaluation of the validation parameters more frequently requested to get the accreditation under the requirements of the ISO/IEC 17025 standard: selectivity, limit of detection, linear interval, sensitivity, precision, trueness and uncertainty. A model for uncertainty estimation was proposed including systematic and random errors. In addition, parameters evaluated during the validation process were also considered as part of the uncertainty model.

Novel drift structures for silicon and compound semiconductor X-ray and gamma-ray detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patt, B.E.; Iwanczyk, J.S.

Recently developed silicon- and compound-semiconductor-based drift detector structures have produced excellent performance for charged particles, X-rays, and gamma rays and for low-signal visible light detection. The silicon drift detector (SDD) structures that the authors discuss relate to direct X-ray detectors and scintillation photon detectors coupled with scintillators for gamma rays. Recent designs include several novel features that ensure very low dark current and hence low noise. In addition, application of thin window technology ensures a very high quantum efficiency entrance window on the drift photodetector. The main features of the silicon drift structures for X rays and light detection aremore » very small anode capacitance independent of the overall detector size, low noise, and high throughput. To take advantage of the small detector capacitance, the first stage of the electronics needs to be integrated into the detector anode. In the gamma-ray application, factors other than electronic noise dominate, and there is no need to integrate the electronics into the anode. Thus, a different drift structure is needed in conjunction with a high-Z material. The main features in this case are large active detector volume and electron-only induced signal.« less

[CANNABIS AND GLAUCOMA: AN ANCIENT LEGEND OR A NOVEL THERAPEUTIC HORIZON?].

PubMed

Mathalone, Nurit; Wolf, Alvit; Geyer, Orna

2015-06-01

Glaucoma causes damage to the optic nerve and compromises the visual field. The main risk factor of the disease is the level of the intra-ocular pressure. Therapeutic options include medical and surgical treatment, aimed to lower the intra-ocular pressure. Consumption of the cannabis plant (Cannabis Satival has been known since ancient times. It can be consumed orally, topically, intra-venous or by inhalation. The main active ingredient of cannabis is THC (Tetra-Hydro-Cannabinol). One of THC's reported effects is the reduction of intra-ocular pressure. Several studies have demonstrated temporary intra-ocular pressure decrease in both healthy subjects and glaucoma patients following topical application or systemic consumption. The effect was a short term one. It was followed by the development of resistance to the drug after prolonged intake and it was also accompanied by topical and systemic side effects. Cannabis may be considered as a therapeutic option in glaucoma. Its limited effect, development of resistance, acquired side effects and the accompanying psycho-active influence limit its advantage and cause its efficacy to be dubious. Therefore, cannabis treatment for glaucoma currently seems impractical and is not recommended by either the Israeli or the American glaucoma societies.

Positive influence of traditional culture and socioeconomic activity on conservation: a case study from the black-and-white snub-nosed monkey (Rhinopithecus bieti) in Tibet.

PubMed

Xiang, Zuo-Fu; Huo, Sheng; Xiao, Wen; Cui, Liang-Wei

2010-12-01

Found in the Trans-Himalayas of north-west Yunnan and south-east Tibet, the black-and-white snub-nosed monkey (Rhinopithecus bieti) is one of the world's most endangered primates. A recent survey indicates that only 15 groups with 2500 individuals remain in the wild. However, the Tibetan Xiaochangdu group may be the only equilibrium group in the field since the last investigation in 1988. To evaluate the effects of traditional culture and socioeconomic activity on biodiversity conservation of R. bieti, we conducted a case study in the Honglaxueshan National Nature Reserve in southeast Tibet from June 2003 to May 2005. Interviews, direct observations, and analysis of socioeconomic data indicated major advantages to the conservation of R. bieti, which included that: 1) traditional culture mainly depended on raising livestock and collecting non-timber products rather than forest planting of Tibetan highland barley; 2) religious beliefs, against to kill any wildlife living on the sacred mountain, were mainly influenced by Tibetan Buddhism; and 3) bigger household numbers were induced by the polyandrous marriage system, which resulted in lower per capita resource consumption than smaller ones.

Synthetic techniques of radiopharmaceuticals production labeled with C-11 for PET in cardiology

NASA Astrophysics Data System (ADS)

Dyubkov, V. S.; Ekaeva, I. V.; Katunina, T. A.; Rumyantsev, A. S.; Silchenkov, A. V.; Tuflina, T. V.

2017-01-01

Positron emission tomography (PET) and PET-Computerised Tomography (CT) are unique, non-invasive diagnostic techniques, in which the local, temporal and quantitative distributions of radioactive labelled substances are measured to investigate physiological processes. It is well known that PET centre of Bakulev Scientific Centre for Cardiovascular Surgery is the oldest one in Moscow. During more than fifteen years a large number of patients have received PET scans. Due to main stream of Scientific Centre, emphasis is placed on examining the heart functioning. For the diagnosis innervation of the heart muscle a number of radiopharmaceuticals are used, including PET radiopharmaceuticals such as 11C-CGP 12177, 11C-meta-hydroxyephedrine as well as its synthetic analogues labelled with other PET radionuclides (18F, 68Ga). 11C-meta-hydroxyephedrine is one of the most perspective radiopharmaceutical for an investigation of cardiac receptors function due to required materials availability for a radio synthesis in Russia. The main advantage of proposed 11C-meta-hydroxyephedrine synthesis technique is the use of a catalyst which allows one decrease reaction time from 5 minutes to 30 seconds. Obtained results allow one decrease reaction time of methylation and increase radiochemical and technological yields.

Transmission and reflection SHSG holograms

NASA Astrophysics Data System (ADS)

Kim, Jong Man; Choi, Byung S.; Choi, Yoon S.; Kim, Sun I.; Kim, Jong-Min; Bjelkhagen, Hans I.; Phillips, Nicholas J.

2001-06-01

Silver halide sensitized gelatin (SHSG) holograms are similar to holograms recorded in dichromated gelatin (DCG), the main recording material for holographic optical elements (HOEs). The drawback of DCG is its low energetic sensitivity and limited spectral response. Silver halide materials can be processed in such a way that the final hologram will have properties like a DCG hologram. Recently this technique has become more interesting since the introduction of new ultra- fine grain silver halide (AgHal) emulsions. In particular, high spatial frequency fringes associated with HOEs of the reflection type are difficult to convert employing SHSG processing methods. Therefore, an optimized processing techniques for reflection HOEs recorded in the new AgHal- materials is introduced. Diffraction efficiencies over 90 percent can be obtained for both transmission and reflection diffraction gratings. Understanding the importance of the selective hardening process has made it possible to obtain results similar to conventional DCG processing. The main advantage of the SHSG process is that high-sensitivity recording can be performed with laser wavelengths anywhere within the visible spectrum. This simplifies the manufacturing of high-quality, large-format HOEs, including also high-quality display holograms of the reflection type, both monochrome and full color.

Holographic Optical Elements Recorded in Silver Halide Sensitized Gelatin Emulsions. Part 2. Reflection Holographic Optical Elements

NASA Astrophysics Data System (ADS)

Kim, Jong Man; Choi, Byung So; Choi, Yoon Sun; Kim, Jong Min; Bjelkhagen, Hans I.; Phillips, Nicholas J.

2002-03-01

Silver halide sensitized gelatin (SHSG) holograms are similar to holograms recorded in dichromated gelatin (DCG), the main recording material for holographic optical elements (HOEs). The drawback of DCG is its low energetic sensitivity and limited spectral response. Silver halide materials can be processed in such a way that the final hologram will have properties like a DCG hologram. Recently this technique has become more interesting since the introduction of new ultra-fine-grain silver halide (AgHal) emulsions. In particular, high spatial-frequency fringes associated with HOEs of the reflection type are difficult to construct when SHSG processing methods are employed. Therefore an optimized processing technique for reflection HOEs recorded in the new AgHal materials is introduced. Diffraction efficiencies over 90% can be obtained repeatably for reflection diffraction gratings. Understanding the importance of a selective hardening process has made it possible to obtain results similar to conventional DCG processing. The main advantage of the SHSG process is that high-sensitivity recording can be performed with laser wavelengths anywhere within the visible spectrum. This simplifies the manufacturing of high-quality, large-format HOEs, also including high-quality display holograms of the reflection type in both monochrome and full color.

Yeast arming systems: pros and cons of different protein anchors and other elements required for display.

PubMed

Andreu, Cecilia; Del Olmo, Marcel Lí

2018-03-01

Yeast display is a powerful strategy that consists in exposing peptides or proteins of interest on the cell surface of this microorganism. Ever since initial experiments with this methodology were carried out, its scope has extended and many applications have been successfully developed in different science and technology fields. Several yeast display systems have been designed, which all involve introducting into yeast cells the gene fusions that contain the coding regions of a signal peptide, an anchor protein, to properly attach the target to the cell surface, and the protein of interest to be exposed, all of which are controlled by a strong promoter. In this work, we report the description of such elements for the alternative systems introduced by focusing particularly on anchor proteins. The comparisons made between them are included whenever possible, and the main advantages and inconveniences of each one are discussed. Despite the huge number of publications on yeast surface display and the revisions published to date, this topic has not yet been widely considered. Finally, given the growing interest in developing systems for non-Saccharomyces yeasts, the main strategies reported for some are also summarized.

Advancement in the chemical analysis and quality control of flavonoid in Ginkgo biloba.

PubMed

Liu, Xin-Guang; Wu, Si-Qi; Li, Ping; Yang, Hua

2015-09-10

Flavonoids are the main active constituents in Ginkgo biloba L., which have been suggested to have broad-spectrum free-radical scavenging activities. This review summarizes the recent advances in the chemical analysis of the flavonoids in G. biloba and its finished products (from 2009 to 2014), including chemical composition, sample preparation, separation, detection and different quality criteria. More than 70 kinds of flavonoids have been identified in this plant. In this review, various analytical approaches as well as their chromatographic conditions have been described, and their advantages/disadvantages are also compared. Quantitative analyses of Ginkgo flavonoids applied by most pharmacopeias start with an acidic hydrolysis followed by determination of the resulting aglycones using HPLC. But increasing direct assay of individual flavonol glycosides found that many adulterated products were still qualified by the present tests. To obtain an authentic and applicable analytical approach for quality evaluation of Ginkgo and its finished products, related suggestions and opinions in the recent publications are mainly discussed in this review. This discussion on chemical analyses of Ginkgo flavonoids will also be found as a significant guide for widely varied natural flavonoids. Copyright © 2015 Elsevier B.V. All rights reserved.

Flexible Metal-Fabric Radiators

NASA Technical Reports Server (NTRS)

Cross, Cynthia; Nguyen, Hai D.; Ruemmele, Warren; Andish, Kambiz K.; McCalley, Sean

2005-01-01

Flexible metal-fabric radiators have been considered as alternative means of dissipating excess heat from spacecraft and space suits. The radiators also may be useful in such special terrestrial applications as rejecting heat from space-suit-like protective suits worn in hot work environments. In addition to flexibility and consequent ease of deployment and installation on objects of varying sizes and shapes, the main advantages of these radiators over conventional rigid radiators are that they weigh less and occupy less volume for a given amount of cooling capacity. A radiator of this type includes conventional stainless-steel tubes carrying a coolant fluid. The main radiating component consists of a fabric of interwoven aluminum-foil strips bonded to the tubes by use of a proprietary process. The strip/tube bonds are strong and highly thermally conductive. Coolant is fed to and from the tubes via flexible stainless-steel manifolds designed to accommodate flexing of, and minimize bending forces on, the fabric. The manifolds are sized to minimize pressure drops and distribute the flow of coolant evenly to all the tubes. The tubes and manifolds are configured in two independent flow loops for operational flexibility and protective redundancy.

Development of the SOFIA silicon carbide secondary mirror

NASA Astrophysics Data System (ADS)

Fruit, Michel; Antoine, Pascal; Varin, Jean-Luc; Bittner, Hermann; Erdmann, Matthias

2003-02-01

The SOFIA telescope is ajoint NASA-DLR project for a 2.5 m airborne Stratospheric Observatory for IR Astronomy to be flown in a specially adapted Boeing 747 SP plane, Kayser-Threde being resopinsible for the development of the Telescope Optics. The φ 352 mm Secondary Mirror is mounted ona chopping mechanism to allow avoidance of background noise during IR observations. Stiffness associated to lightness is a major demand for such a mirror to achieve high frequency chopping. This leads to select SIlicon Carbide for the mirror blank. Its development has been run by the ASTRIUM/BOOSTEC joint venture SiCSPACE, taking full benefit of the instrinsic properties of the BOOSTEC SiC-100 sintered material, associated to qualified processes specifically developed for space borne mirrors by ASTRIUM. Achieved performances include a low mass of 1.97 kg, a very high stiffness with a first resonant frequency of 1865 Hz and a measured optical surface accuracy of 39 nm rms, using Ion Beam Figuring. It is proposed here to present the major design features of the SOFIA Secondary Mirror, highlighting the main advantages of using Silicon Carbide, the main steps of its development and the achieved optomechanical performances of the developed mirror.

Propeller Perforator Flaps in Distal Lower Leg: Evolution and Clinical Applications

PubMed Central

2012-01-01

Simple or complex defects in the lower leg, and especially in its distal third, continue to be a challenging task for reconstructive surgeons. A variety of flaps were used in the attempt to achieve excellence in form and function. After a long evolution of the reconstructive methods, including random pattern flaps, axial pattern flaps, musculocutaneous flaps and fasciocutaneous flaps, the reappraisal of the works of Manchot and Salmon by Taylor and Palmer opened the era of perforator flaps. This era began in 1989, when Koshima and Soeda, and separately Kroll and Rosenfield described the first applications of such flaps. Perforator flaps, whether free or pedicled, gained a high popularity due to their main advantages: decreasing donor-site morbidity and improving aesthetic outcome. The use as local perforator flaps in lower leg was possible due to a better understanding of the cutaneous circulation, leg vascular anatomy, angiosome and perforasome concepts, as well as innovations in flaps design. This review will describe the evolution, anatomy, flap design, and technique of the main distally pedicled propeller perforator flaps used in the reconstruction of defects in the distal third of the lower leg and foot. PMID:22783507

[Progress in inversion of vegetation nitrogen concentration by hyperspectral remote sensing].

PubMed

Wang, Li-Wen; Wei, Ya-Xing

2013-10-01

Nitrogen is the necessary element in life activity of vegetation, which takes important function in biosynthesis of protein, nucleic acid, chlorophyll, and enzyme etc, and plays a key role in vegetation photosynthesis. The technology about inversion of vegetation nitrogen concentration by hyperspectral remote sensing has been the research hotspot since the 70s of last century. With the development of hyperspectral remote sensing technology in recent years, the advantage of spectral bands subdivision in a certain spectral region provides the powerful technology measure for correlative spectral characteristic research on vegetation nitrogen. In the present paper, combined with the newest research production about monitoring vegetation nitrogen concentration by hyperspectral remote sensing published in main geography science literature in recent several years, the principle and correlated problem about monitoring vegetation nitrogen concentration by hyperspectral remote sensing were introduced. From four aspects including vegetation nitrogen spectral index, vegetation nitrogen content inversion based on chlorophyll index, regression model, and eliminating influence factors to inversion of vegetation nitrogen concentration, main technology methods about inversion of vegetation nitrogen concentration by hyperspectral remote sensing were detailedly introduced. Correlative research conclusions were summarized and analyzed, and research development trend was discussed.

Oblique Aerial Photography Tool for Building Inspection and Damage Assessment

NASA Astrophysics Data System (ADS)

Murtiyoso, A.; Remondino, F.; Rupnik, E.; Nex, F.; Grussenmeyer, P.

2014-11-01

Aerial photography has a long history of being employed for mapping purposes due to some of its main advantages, including large area imaging from above and minimization of field work. Since few years multi-camera aerial systems are becoming a practical sensor technology across a growing geospatial market, as complementary to the traditional vertical views. Multi-camera aerial systems capture not only the conventional nadir views, but also tilted images at the same time. In this paper, a particular use of such imagery in the field of building inspection as well as disaster assessment is addressed. The main idea is to inspect a building from four cardinal directions by using monoplotting functionalities. The developed application allows to measure building height and distances and to digitize man-made structures, creating 3D surfaces and building models. The realized GUI is capable of identifying a building from several oblique points of views, as well as calculates the approximate height of buildings, ground distances and basic vectorization. The geometric accuracy of the results remains a function of several parameters, namely image resolution, quality of available parameters (DEM, calibration and orientation values), user expertise and measuring capability.

A simple and rapid infrared-assisted self enzymolysis extraction method for total flavonoid aglycones extraction from Scutellariae Radix and mechanism exploration.

PubMed

Wang, Liping; Duan, Haotian; Jiang, Jiebing; Long, Jiakun; Yu, Yingjia; Chen, Guiliang; Duan, Gengli

2017-09-01

A new, simple, and fast infrared-assisted self enzymolysis extraction (IRASEE) approach for the extraction of total flavonoid aglycones (TFA) mainly including baicalein, wogonin, and oroxylin A from Scutellariae Radix is presented to enhance extraction yield. Extraction enzymolysis temperature, enzymolysis liquid-to-solid ratio, enzymolysis pH, enzymolysis time and infrared power, the factors affecting IRASEE procedure, were investigated in a newly designed, temperature-controlled infrared-assisted extraction (TC-IRAE) system to acquire the optimum analysis conditions. The results illustrated that IRASEE possessed great advantages in terms of efficiency and time compared with other conventional extraction techniques. Furthermore, the mechanism of IRASEE was preliminarily explored by observing the microscopic change of the samples surface structures, studying the main chemical compositions change of the samples before and after extraction and investigating the kinetics and thermodynamics at three temperature levels during the IRASEE process. These findings revealed that IRASEE can destroy the surface microstructures to accelerate the mass transfer and reduce the activation energy to intensify the chemical process. This integrative study presents a simple, rapid, efficient, and environmental IRASEE method for TFA extraction which has promising prospects for other similar herbal medicines. Graphical Abstract ᅟ.

A combinational theory for maintenance of sex

PubMed Central

Hörandl, E

2010-01-01

Sexual reproduction implies high costs, but it is difficult to give evidence for evolutionary advantages that would explain the predominance of meiotic sex in eukaryotes. A combinational theory discussing evolution, maintenance and loss of sex may resolve the problem. The main function of sex is the restoration of DNA and consequently a higher quality of offspring. Recombination at meiosis evolved, perhaps, as a repair mechanism of DNA strand damages. This mechanism is most efficient for DNA restoration in multicellular eukaryotes, because the initial cell starts with a re-optimized genome, which is passed to all the daughter cells. Meiosis acts also as creator of variation in haploid stages, in which selection can purge most efficiently deleterious mutations. A prolonged diploid phase buffers the effects of deleterious recessive alleles as well as epigenetic defects and is thus optimal for prolonged growth periods. For complex multicellular organisms, the main advantage of sexuality is thus the alternation of diploid and haploid stages, combining advantages of both. A loss of sex is constrained by several, partly group-specific, developmental features. Hybridization may trigger shifts from sexual to asexual reproduction, but crossing barriers of the parental sexual species limit this process. For the concerted break-up of meiosis-outcrossing cycles plus silencing of secondary features, various group-specific changes in the regulatory system may be required. An establishment of asexuals requires special functional modifications and environmental opportunities. Costs for maintenance of meiotic sex are consequently lower than a shift to asexual reproduction. PMID:19623209

An intercomparison of available soil moisture estimates from thermal-infrared and passive microwave remote sensing and land-surface modeling

USDA-ARS?s Scientific Manuscript database

Remotely-sensed soil moisture studies have mainly focused on retrievals using active and passive microwave (MW) sensors whose measurements provided a direct relationship to soil moisture (SM). MW sensors present obvious advantages such as the ability to retrieve through non-precipitating cloud cover...

Campus Spies? Using Mystery Students to Evaluate University Performance

ERIC Educational Resources Information Center

Douglas, Alex; Douglas, Jacqueline

2006-01-01

Background: This paper explores the appropriateness of using mystery customer programmes in higher education institutions (HEIs) in the UK. Purpose: The main aim of the paper is to examine potential advantages and disadvantages of mystery customer programmes within HEIs, and to identify any issues that would need to be successfully resolved were…

Development of Teachers' Alternative Certification in the USA

ERIC Educational Resources Information Center

Pazyura, Natalia

2015-01-01

The article reveals the prerequisites of appearance of alternative ways to train teachers in the USA at the end of the XX century as main mechanisms to increase qualitative and quantitative characteristics of teaching staff. The author concentrates the attention on the advantages and disadvantages of non-traditional ways to acquire teaching…

HEALTH PROGRAM INPLEMENTATION THROUGH PERT, ADMINISTRATIVE AND EDUCATIONAL USES.

ERIC Educational Resources Information Center

ARNOLD, MARY F.; AND OTHERS

THE MAIN ADVANTAGE OF THE PROGRAM EVALUATION AND REVIEW TECHNIQUE (PERT) IS THE PROVISION OF A GRAPHIC MODEL OF ACTIVITIES WITH ESTIMATES OF THE TIME, RESOURCES, PERSONNEL, AND FACILITIES NECESSARY TO ACCOMPLISH A SEQUENCE OF INTERDEPENDENT ACTIVITIES, AS IN PROGRAM IMPLEMENTATION. A PERT MODEL CAN ALSO IMPROVE COMMUNICATION BETWEEN PERSONS AND…

High-concentration mirror-based Kohler integrating system for tandem solar cells

NASA Astrophysics Data System (ADS)

Winston, R.; Benitez, P.; Cvetkovic, A.

2006-06-01

A novel two-mirror high concentration nonimaging optic has been designed that shares the advantages of present two mirror aplanatic imaging concentrators but also overcomes their main limitation of trade-off between acceptance angle and irradiance uniformity. A system concept has been defined, and a first prototype in under development.

Generation of unstructured grids and Euler solutions for complex geometries

NASA Technical Reports Server (NTRS)

Loehner, Rainald; Parikh, Paresh; Salas, Manuel D.

1989-01-01

Algorithms are described for the generation and adaptation of unstructured grids in two and three dimensions, as well as Euler solvers for unstructured grids. The main purpose is to demonstrate how unstructured grids may be employed advantageously for the economic simulation of both geometrically as well as physically complex flow fields.

An improvised mould for vaginoplasty.

PubMed

Viegas, T; Thomas, R; Guido, N L

1989-07-01

The use of a simple, improvised mould for vaginoplasty is described. It is made of rubber foam rolled over a winged infusion cannula and covered over by condoms. It offers a number of advantages over conventional moulds, the main ones being its simplicity of construction and its ease of application and removal from the neo-vagina.

Romanian Diaspora in the Making? An Online Ethnography of Romaniancommunity.net

ERIC Educational Resources Information Center

Macri, Gloria

2013-01-01

This chapter presents a case study of an online ethnography which examines the Romanian Community of Ireland forum. Apart from highlighting the main challenges and advantages of engaging with an ethnographic methodology online, this chapter also showcases the key findings emerging in relation to the meanings which members of this community…

An overview of smart grid routing algorithms

NASA Astrophysics Data System (ADS)

Wang, Junsheng; OU, Qinghai; Shen, Haijuan

2017-08-01

This paper summarizes the typical routing algorithm in smart grid by analyzing the communication business and communication requirements of intelligent grid. Mainly from the two kinds of routing algorithm is analyzed, namely clustering routing algorithm and routing algorithm, analyzed the advantages and disadvantages of two kinds of typical routing algorithm in routing algorithm and applicability.

Collaborative Core Research Program for Chemical-Biological Warfare Defense

DTIC Science & Technology

2015-01-04

Discovery through High Throughput Screening (HTS) and Fragment-Based Drug Design (FBDD...Discovery through High Throughput Screening (HTS) and Fragment-Based Drug Design (FBDD) Current pharmaceutical approaches involving drug discovery...structural analysis and docking program generally known as fragment based drug design (FBDD). The main advantage of using these approaches is that

Estimation of watershed lag times and times of concentration for the Kansas City Area : technical summary.

DOT National Transportation Integrated Search

2016-04-01

The new lag-time equation for the Kansas City area performs better than the 2001 KU-KDOT equation for urban lag time, which was developed from a study of 14 gaged watersheds in Johnson County (McEnroe & Zhao, 2001). The main advantage of the new lag-...