EAST AND WEST ELEVATIONS OF MAIN PROCESSING BUILDING (CPP601). INL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

EAST AND WEST ELEVATIONS OF MAIN PROCESSING BUILDING (CPP-601). INL DRAWING NUMBER 200-0601-00-291-103081. ALTERNATE ID NUMBER 542-11-B-75. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

STRUCTURAL DETAILS AND SECTIONS OF MAIN PROCESSING BUILDING (CPP601). INL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

STRUCTURAL DETAILS AND SECTIONS OF MAIN PROCESSING BUILDING (CPP-601). INL DRAWING NUMBER 200-0601-00-291-103079. ALTERNATE ID NUMBER 542-11-B-73. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

NORTH SECTION OF WEST ELEVATION OF MAIN PROCESSING BUILDING (CPP601) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

NORTH SECTION OF WEST ELEVATION OF MAIN PROCESSING BUILDING (CPP-601) LOOKING EAST. HOT PILOT PLANT BUILDING (CPP-640) APPEARS IN RIGHT OF PHOTO. THE REMOTE ANALYTICAL FACILITY (CPP-627) WAS LOCATED ON CONCRETE PAD IN FOREGROUND. INL PHOTO NUMBER HD-54-33-3. Mike Crane, Photographer, 7/2006 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

PLAN SECTIONS AND DETAILS OF CELL HATCHES MAIN PROCESSING BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PLAN SECTIONS AND DETAILS OF CELL HATCHES MAIN PROCESSING BUILDING (CPP-601). INL DRAWING NUMBER 200-0601-00-291-103256. ALTERNATE ID NUMBER 542-11-F-302. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

CONSTRUCTION VIEW OF MAIN PROCESSING BUILDING (CPP601) ON THE RIGHT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CONSTRUCTION VIEW OF MAIN PROCESSING BUILDING (CPP-601) ON THE RIGHT AND LABORATORY (CPP-602) ON THE LEFT. INL PHOTO NUMBER NRTS-51-3373. Unknown Photographer, 9/28/1951 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

EQUIPMENT LAYOUT OF MAIN PROCESSING BUILDING (CPP601) LCELL PLAN AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

EQUIPMENT LAYOUT OF MAIN PROCESSING BUILDING (CPP-601) L-CELL PLAN AND SECTION SHOWS COMPLEXITY OF CELLS. INL DRAWING NUMBER 200-0601-00-098-105687. ALTERNATE ID NUMBER 4289-20-301. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

The study of thermal processes in control systems of heat consumption of buildings

NASA Astrophysics Data System (ADS)

Tsynaeva, E.; A, Tsynaeva

2017-11-01

The article discusses the main thermal processes in the automated control systems for heat consumption (ACSHC) of buildings, schematic diagrams of these systems, mathematical models used for description of thermal processes in ACSHC. Conducted verification represented by mathematical models. It was found that the efficiency of the operation of ACSHC depend from the external and internal factors. Numerical study of dynamic modes of operation of ACSHC.

[Dynamic changes of urban architecture landscape based on Barista: a case study in Tiexi District of Shenyang City].

PubMed

Zhang, Pei-feng; Hu, Yuan-man; He, Hong-shi; Xiong, Zai-ping; Liu, Miao

2010-12-01

In this paper, three-dimensional building information was extracted from high resolution satellite image based on Barista software. Combined with ArcGIS software, the dynamic changes of the building landscape in Tiexi District of Shenyang City during urban renewal process were analyzed from the conversion contribution rate, building density, average building height, and built-up area rate. It was found that during this urban renewal process, four dominant landscape types (vacant lot, residential building, industrial building, and road) were the main parts of the landscape changes. The areas of vacant lot, residential building, commercial building, and road increased, while that of industrial building decreased. The building density decreased, while the average building height increased. There was an obvious regional variation in building landscape. The building density in industrial district was higher than that in residential district, while the average building height was in adverse. The further from the city center, the lower the building density and building average height.

KSC-2012-1852

NASA Image and Video Library

2012-02-17

Industrial Area Construction: Located 5 miles south of Launch Complex 39, construction of the main buildings -- Operations and Checkout Building, Headquarters Building, and Central Instrumentation Facility – began in 1963. In 1992, the Space Station Processing Facility was designed and constructed for the pre-launch processing of International Space Station hardware that was flown on the space shuttle. Along with other facilities, the industrial area provides spacecraft assembly and checkout, crew training, computer and instrumentation equipment, hardware preflight testing and preparations, as well as administrative offices. Poster designed by Kennedy Space Center Graphics Department/Greg Lee. Credit: NASA

A Context-Driven Model for the Flat Roofs Construction Process through Sensing Systems, Internet-of-Things and Last Planner System

PubMed Central

Andújar-Montoya, María Dolores

2017-01-01

The main causes of building defects are errors in the design and the construction phases. These causes related to construction are mainly due to the general lack of control of construction work and represent approximately 75% of the anomalies. In particular, one of the main causes of such anomalies, which end in building defects, is the lack of control over the physical variables of the work environment during the execution of tasks. Therefore, the high percentage of defects detected in buildings that have the root cause in the construction phase could be avoidable with a more accurate and efficient control of the process. The present work proposes a novel integration model based on information and communications technologies for the automation of both construction work and its management at the execution phase, specifically focused on the flat roof construction process. Roofs represent the second area where more defects are claimed. The proposed model is based on a Web system, supported by a service oriented architecture, for the integral management of tasks through the Last Planner System methodology, but incorporating the management of task restrictions from the physical environment variables by designing specific sensing systems. Likewise, all workers are integrated into the management process by Internet-of-Things solutions that guide them throughout the execution process in a non-intrusive and transparent way. PMID:28737693

A Context-Driven Model for the Flat Roofs Construction Process through Sensing Systems, Internet-of-Things and Last Planner System.

PubMed

Andújar-Montoya, María Dolores; Marcos-Jorquera, Diego; García-Botella, Francisco Manuel; Gilart-Iglesias, Virgilio

2017-07-22

The main causes of building defects are errors in the design and the construction phases. These causes related to construction are mainly due to the general lack of control of construction work and represent approximately 75% of the anomalies. In particular, one of the main causes of such anomalies, which end in building defects, is the lack of control over the physical variables of the work environment during the execution of tasks. Therefore, the high percentage of defects detected in buildings that have the root cause in the construction phase could be avoidable with a more accurate and efficient control of the process. The present work proposes a novel integration model based on information and communications technologies for the automation of both construction work and its management at the execution phase, specifically focused on the flat roof construction process. Roofs represent the second area where more defects are claimed. The proposed model is based on a Web system, supported by a service oriented architecture, for the integral management of tasks through the Last Planner System methodology, but incorporating the management of task restrictions from the physical environment variables by designing specific sensing systems. Likewise, all workers are integrated into the management process by Internet-of-Things solutions that guide them throughout the execution process in a non-intrusive and transparent way.

KSC-2011-2678

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Main engine No. 1, which was removed from space shuttle Discovery, is transported from Orbiter Processing Facility-2 to the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida. The removal was part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2677

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Main engine No. 1, which was removed from space shuttle Discovery, is transported from Orbiter Processing Facility-2 to the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida. The removal was part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2679

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Main engine No. 1, which was removed from space shuttle Discovery, is transported from Orbiter Processing Facility-2 to the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida. The removal was part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

78 FR 44455 - National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-24

... Sonoma County, California. The Site's main property contains a manufacturing building and adjoining... corner of the manufacturing facility. The Site building is currently occupied by three companies, which.... Sola manufactured ophthalmic lenses at the facility from 1978 through 2001. The manufacturing process...

Radiological restrictions of using red mud as building material additive.

PubMed

Gu, Hannian; Wang, Ning; Liu, Shirong

2012-09-01

Red mud remains as residue from the processing of bauxite using different methods. The chemical composition of red mud varies widely with respect to the types of bauxite ore and processing parameters. Red mud samples from Guizhou, China, were investigated using a X-ray fluorescence spectroscope, a quadrupole inductively coupled plasma mass spectrometer and a electron probe micro-analyzer. The results showed that red mud consisted of eight main chemical components--CaO, Al(2)O(3), SiO(2), Fe(2)O(3), TiO(2), Na(2)O, K(2)O and MgO--and dozens of trace elements, including natural radioactive elements, such as uranium and thorium. Gamma spectrometric analysis showed that the values of internal exposure index I (Ra) and external exposure index I (γ) of Guizhou red mud were 1.1-2.4 and 2.3-3.5 respectively. Thus, it should not be used as a main building material indiscriminately. The amount of red mud from Guizhou when it is used for main building materials in China should be less than 28-44%.

Using a Systematic Approach in the Analysis of the Factors That Influence On a Form Formation of Buildings of Higher Educational Establishments

NASA Astrophysics Data System (ADS)

Martyniv, Oleksandra; Kinasz, Roman

2017-10-01

This material covers the row of basic factors that influence on architectonically-spatial solution formation of building of Higher educational establishments (hereinafter universities). For this purpose, the systematization process of factors that influence on the university architecture was conducted and presented. The conclusion of this article was the proposed concept of considering universities as a hierarchical system, elements of which act as factors of influence, which in the process of alternating influence lead to the main goal, namely the formation of a new university building.

Building No. 5, Main Building; Building NO. 9, Guard House ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building No. 5, Main Building; Building NO. 9, Guard House (left). Viewed from across corner Lakeside Avenue and Main Street - Thomas A. Edison Laboratories, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

Reactions of C1 Building Blocks

NASA Astrophysics Data System (ADS)

Stöcker, Michael

The chapter “Reactions of C1 Building Blocks” covers the direct conversion of methane to aromatics, the methanol-to-hydrocarbons (MTHC) conversion with respect to gasoline (methanol to gasoline) and olefins (methanol to olefins, methanol-to-propene) as well as some combinations like the TIGAS and Mobil's olefin-to-gasoline and distillate processes. The main focus within this chapter will be on the industrial processes, especially concerning the MTHC reactions - including catalytic systems, reaction conditions, process - and to a minor extent related to the mechanistic aspects and kinetic considerations.

Global optimization framework for solar building design

NASA Astrophysics Data System (ADS)

Silva, N.; Alves, N.; Pascoal-Faria, P.

2017-07-01

The generative modeling paradigm is a shift from static models to flexible models. It describes a modeling process using functions, methods and operators. The result is an algorithmic description of the construction process. Each evaluation of such an algorithm creates a model instance, which depends on its input parameters (width, height, volume, roof angle, orientation, location). These values are normally chosen according to aesthetic aspects and style. In this study, the model's parameters are automatically generated according to an objective function. A generative model can be optimized according to its parameters, in this way, the best solution for a constrained problem is determined. Besides the establishment of an overall framework design, this work consists on the identification of different building shapes and their main parameters, the creation of an algorithmic description for these main shapes and the formulation of the objective function, respecting a building's energy consumption (solar energy, heating and insulation). Additionally, the conception of an optimization pipeline, combining an energy calculation tool with a geometric scripting engine is presented. The methods developed leads to an automated and optimized 3D shape generation for the projected building (based on the desired conditions and according to specific constrains). The approach proposed will help in the construction of real buildings that account for less energy consumption and for a more sustainable world.

Review of optimization techniques of polygeneration systems for building applications

NASA Astrophysics Data System (ADS)

Y, Rong A.; Y, Su; R, Lahdelma

2016-08-01

Polygeneration means simultaneous production of two or more energy products in a single integrated process. Polygeneration is an energy-efficient technology and plays an important role in transition into future low-carbon energy systems. It can find wide applications in utilities, different types of industrial sectors and building sectors. This paper mainly focus on polygeneration applications in building sectors. The scales of polygeneration systems in building sectors range from the micro-level for a single home building to the large- level for residential districts. Also the development of polygeneration microgrid is related to building applications. The paper aims at giving a comprehensive review for optimization techniques for designing, synthesizing and operating different types of polygeneration systems for building applications.

ETR AND MTR COMPLEXES IN CONTEXT. CAMERA FACING NORTHERLY. FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR AND MTR COMPLEXES IN CONTEXT. CAMERA FACING NORTHERLY. FROM BOTTOM TO TOP: ETR COOLING TOWER, ELECTRICAL BUILDING AND LOW-BAY SECTION OF ETR BUILDING, HEAT EXCHANGER BUILDING (WITH U SHAPED YARD), COMPRESSOR BUILDING. MTR REACTOR SERVICES BUILDING IS ATTACHED TO SOUTH WALL OF MTR. WING A IS ATTACHED TO BALCONY FLOOR OF MTR. NEAR UPPER RIGHT CORNER OF VIEW IS MTR PROCESS WATER BUILDING. WING B IS AT FAR WEST END OF COMPLEX. NEAR MAIN GATE IS GAMMA FACILITY, WITH "COLD" BUILDINGS BEYOND: RAW WATER STORAGE TANKS, STEAM PLANT, MTR COOLING TOWER PUMP HOUSE AND COOLING TOWER. INL NEGATIVE NO. 56-4101. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Influence of Building Material Solution of Structures to Effectiveness of Real Estate Development

NASA Astrophysics Data System (ADS)

Somorová, Viera

2015-11-01

Real estate development is in its essence the development process characterized by a considerable dynamics. The purpose of the development process is the creation of buildings which can be either rented by future unknown users or sold in the real estate market. A first part of the paper is dedicated to the analysis of the parameters of buildings solutions considering the future operating costs in a phase of designing. Material solution of external structures is a main factor not only in determining the future operating costs but also in achieving the subsequent economic effectiveness of the real estate development. To determine the relationship between economic efficiency criteria and determine the optimal material variant of building constructions for the specific example is the aim of the second part of paper.

Building No. 1, left; Building No. 9, Guard House, center; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building No. 1, left; Building No. 9, Guard House, center; Building No. 5, Main Building, right. View from across Main Street - Thomas A. Edison Laboratories, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

KSC-98pc786

NASA Image and Video Library

1998-07-06

James W. Tibble (pointing at engine), an Engine Systems/Ground Support Equipment team manager for Rocketdyne, discusses the operation of a Space Shuttle Main Engine with Robert B. Sieck, director of Shuttle Processing; U.S. Congressman Dave Weldon; and KSC Center Director Roy D. Bridges Jr. Following the ribbon cutting ceremony for KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF), KSC employees and media explored the facility. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

James W. Tibble (pointing at engine), an Engine Systems/Ground Support Equipment team manager for Rocketdyne, discusses the operation of a Space Shuttle Main Engine with Robert B. Sieck, director of Shuttle Processing; U.S. Congressman Dave Weldon; and KSC Center Director Roy D. Bridges Jr. Following the ribbon cutting ceremony for KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF), KSC employees and media explored the facility. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

Building a new predictor for multiple linear regression technique-based corrective maintenance turnaround time.

PubMed

Cruz, Antonio M; Barr, Cameron; Puñales-Pozo, Elsa

2008-01-01

This research's main goals were to build a predictor for a turnaround time (TAT) indicator for estimating its values and use a numerical clustering technique for finding possible causes of undesirable TAT values. The following stages were used: domain understanding, data characterisation and sample reduction and insight characterisation. Building the TAT indicator multiple linear regression predictor and clustering techniques were used for improving corrective maintenance task efficiency in a clinical engineering department (CED). The indicator being studied was turnaround time (TAT). Multiple linear regression was used for building a predictive TAT value model. The variables contributing to such model were clinical engineering department response time (CE(rt), 0.415 positive coefficient), stock service response time (Stock(rt), 0.734 positive coefficient), priority level (0.21 positive coefficient) and service time (0.06 positive coefficient). The regression process showed heavy reliance on Stock(rt), CE(rt) and priority, in that order. Clustering techniques revealed the main causes of high TAT values. This examination has provided a means for analysing current technical service quality and effectiveness. In doing so, it has demonstrated a process for identifying areas and methods of improvement and a model against which to analyse these methods' effectiveness.

Black Maria Reconstruction (left foreground); Building No. 1; Main Building; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Black Maria Reconstruction (left foreground); Building No. 1; Main Building; Edison Storage Battery Building (right background) - Thomas A. Edison Laboratories, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

Waste processing building with incineration technology

NASA Astrophysics Data System (ADS)

Wasilah, Wasilah; Zaldi Suradin, Muh.

2017-12-01

In Indonesia, waste problem is one of major problem of the society in the city as part of their life dynamics. Based on Regional Medium Term Development Plan of South Sulawesi Province in 2013-2018, total volume and waste production from Makassar City, Maros, Gowa, and Takalar Regency estimates the garbage dump level 9,076.949 m3/person/day. Additionally, aim of this design is to present a recommendation on waste processing facility design that would accommodate waste processing process activity by incineration technology and supported by supporting activity such as place of education and research on waste, and the administration activity on waste processing facility. Implementation of incineration technology would reduce waste volume up to 90% followed by relative negative impact possibility. The result planning is in form of landscape layout that inspired from the observation analysis of satellite image line pattern of planning site and then created as a building site pattern. Consideration of building orientation conducted by wind analysis process and sun path by auto desk project Vasari software. The footprint designed by separate circulation system between waste management facility interest and the social visiting activity in order to minimize the croos and thus bring convenient to the building user. Building mass designed by inseparable connection series system, from the main building that located in the Northward, then connected to a centre visitor area lengthways, and walked to the waste processing area into the residue area in the Southward area.

Interior. Plantcrushing and fiberprocessing apparatus used in latexextraction experiments. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior. Plant-crushing and fiber-processing apparatus used in latex-extraction experiments. - Thomas A. Edison Laboratories, Building No. 2, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

Interior. Plantcrushing and fiberprocessing equipment used in latexextraction experiments. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior. Plant-crushing and fiber-processing equipment used in latex-extraction experiments. - Thomas A. Edison Laboratories, Building No. 2, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

Analysis of the build-up of semi and non volatile organic compounds on urban roads.

PubMed

Mahbub, Parvez; Ayoko, Godwin A; Goonetilleke, Ashantha; Egodawatta, Prasanna

2011-04-01

Vehicular traffic in urban areas may adversely affect urban water quality through the build-up of traffic generated semi and non volatile organic compounds (SVOCs and NVOCs) on road surfaces. The characterisation of the build-up processes is the key to developing mitigation measures for the removal of such pollutants from urban stormwater. An in-depth analysis of the build-up of SVOCs and NVOCs was undertaken in the Gold Coast region in Australia. Principal Component Analysis (PCA) and Multicriteria Decision tools such as PROMETHEE and GAIA were employed to understand the SVOC and NVOC build-up under combined traffic scenarios of low, moderate, and high traffic in different land uses. It was found that congestion in the commercial areas and use of lubricants and motor oils in the industrial areas were the main sources of SVOCs and NVOCs on urban roads, respectively. The contribution from residential areas to the build-up of such pollutants was hardly noticeable. It was also revealed through this investigation that the target SVOCs and NVOCs were mainly attached to particulate fractions of 75-300 μm whilst the redistribution of coarse fractions due to vehicle activity mainly occurred in the >300 μm size range. Lastly, under combined traffic scenario, moderate traffic with average daily traffic ranging from 2300 to 5900 and average congestion of 0.47 were found to dominate SVOC and NVOC build-up on roads. Copyright © 2011 Elsevier Ltd. All rights reserved.

Advanced Vacuum Plasma Spray (VPS) for a Robust, Longlife and Safe Space Shuttle Main Engine (SSME)

NASA Technical Reports Server (NTRS)

Holmes, Richard R.; Elam, Sandra K.; McKechnie, Timothy N.; Power, Christopher A.

2010-01-01

In 1984, the Vacuum Plasma Spray Lab was built at NASA/Marshall Space Flight Center for applying durable, protective coatings to turbine blades for the space shuttle main engine (SSME) high pressure fuel turbopump. Existing turbine blades were cracking and breaking off after five hot fire tests while VPS coated turbine blades showed no wear or cracking after 40 hot fire tests. Following that, a major manufacturing problem of copper coatings peeling off the SSME Titanium Main Fuel Valve Housing was corrected with a tenacious VPS copper coating. A patented VPS process utilizing Functional Gradient Material (FGM) application was developed to build ceramic lined metallic cartridges for space furnace experiments, safely containing gallium arsenide at 1260 degrees centigrade. The VPS/FGM process was then translated to build robust, long life, liquid rocket combustion chambers for the space shuttle main engine. A 5K (5,000 Lb. thrust) thruster with the VPS/FGM protective coating experienced 220 hot firing tests in pristine condition with no wear compared to the SSME which showed blanching (surface pulverization) and cooling channel cracks in less than 30 of the same hot firing tests. After 35 of the hot firing tests, the injector face plates disintegrated. The VPS/FGM process was then applied to spraying protective thermal barrier coatings on the face plates which showed 50% cooler operating temperature, with no wear after 50 hot fire tests. Cooling channels were closed out in two weeks, compared to one year for the SSME. Working up the TRL (Technology Readiness Level) to establish the VPS/FGM process as viable technology, a 40K thruster was built and is currently being tested. Proposed is to build a J-2X size liquid rocket engine as the final step in establishing the VPS/FGM process TRL for space flight.

Elevation of pier building and main house looking south. Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Elevation of pier building and main house looking south. Building at far right was fish smokehouse. Roof of building at right was used for drying fish. - Beacon Marine Basin, 211 East Main Street, Gloucester, Essex County, MA

Automated Classification of Heritage Buildings for As-Built Bim Using Machine Learning Techniques

NASA Astrophysics Data System (ADS)

Bassier, M.; Vergauwen, M.; Van Genechten, B.

2017-08-01

Semantically rich three dimensional models such as Building Information Models (BIMs) are increasingly used in digital heritage. They provide the required information to varying stakeholders during the different stages of the historic buildings life cyle which is crucial in the conservation process. The creation of as-built BIM models is based on point cloud data. However, manually interpreting this data is labour intensive and often leads to misinterpretations. By automatically classifying the point cloud, the information can be proccesed more effeciently. A key aspect in this automated scan-to-BIM process is the classification of building objects. In this research we look to automatically recognise elements in existing buildings to create compact semantic information models. Our algorithm efficiently extracts the main structural components such as floors, ceilings, roofs, walls and beams despite the presence of significant clutter and occlusions. More specifically, Support Vector Machines (SVM) are proposed for the classification. The algorithm is evaluated using real data of a variety of existing buildings. The results prove that the used classifier recognizes the objects with both high precision and recall. As a result, entire data sets are reliably labelled at once. The approach enables experts to better document and process heritage assets.

Television and School Building Design in the Asian Region. School Building Digest 14.

ERIC Educational Resources Information Center

Vickery, D. J.

Television plays an important part in the process of teaching and learning in a number of countries in the Asian Region. Although television can be used in any normal classroom, there are a few aspects of television viewing that, if considered at the design stage, will result in greater convenience. This digest sets out the main points that should…

Life cycle assessment of the end-of-life phase of a residential building.

PubMed

Vitale, Pierluca; Arena, Noemi; Di Gregorio, Fabrizio; Arena, Umberto

2017-02-01

The study investigates the potential environmental impacts related to the end-of-life phase of a residential building, identified in a multifamily dwelling of three levels, constructed in the South of Italy by utilizing conventional materials and up-to-date procedures. An attributional life cycle assessment has been utilised to quantify the contributions of each stage of the end-of-life phase, with a particular attention to the management of the demolition waste. The investigation takes into account the selective demolition, preliminary sorting and collection of main components of the building, together with the processes of sorting, recycling and/or disposal of main fractions of the demolition waste. It quantifies the connections between these on-site and off-site processes as well as the main streams of materials sent to recycling, energy recovery, and final disposal. A sensitivity analysis has been eventually carried out by comparing the overall environmental performances of some alternative scenarios, characterised by different criteria for the demolition of the reference building, management of demolition waste and assessment of avoided burdens of the main recycled materials. The results quantify the advantage of an appropriate technique of selective demolition, which could increase the quality and quantity of residues sent to the treatment of resource recovery and safe disposal. They also highlight the contributions to the positive or negative environmental impact of each stage of the investigated waste management system. The recycling of reinforcing steel appears to play a paramount role, accounting for 65% of the total avoided impacts related to respiratory inorganics, 89% of those for global warming and 73% of those for mineral extraction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Role of Process Control in Improving Space Vehicle Safety A Space Shuttle External Tank Example

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Nguyen, Son C.; Burleson, Keith W.

2006-01-01

Developing a safe and reliable space vehicle requires good design and good manufacturing, or in other words "design it right and build it right". A great design can be hard to build or manufacture mainly due to difficulties related to quality. Specifically, process control can be a challenge. As a result, the system suffers from low quality which leads to low reliability and high system risk. The Space Shuttle has experienced some of those cases, but has overcome these difficulties through extensive redesign efforts and process enhancements. One example is the design of the hot gas temperature sensor on the Space Shuttle Main Engine (SSME), which resulted in failure of the sensor in flight and led to a redesign of the sensor. The most recent example is the Space Shuttle External Tank (ET) Thermal Protection System (TPS) reliability issues that contributed to the Columbia accident. As a result, extensive redesign and process enhancement activities have been performed over the last two years to minimize the sensitivities and difficulties of the manual TPS application process.

From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project.

PubMed

Portalés, Cristina; Casas, Sergio; Gimeno, Jesús; Fernández, Marcos; Poza, Montse

2018-04-19

Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes.

From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project

PubMed Central

Fernández, Marcos; Poza, Montse

2018-01-01

Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes. PMID:29671799

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

Participants in the ribbon cutting for KSC's new 34,600-square- foot Space Shuttle Main Engine Processing Facility (SSMEPF) gather to talk inside the facility following the ceremony. From left, they are Robert B. Sieck, director of Shuttle Processing; KSC Center Director Roy D. Bridges Jr.; U.S. Congressman Dave Weldon; John Plowden, vice president of Rocketdyne; and Donald R. McMonagle, manager of Launch Integration. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

Suppression of Story Character Goals during Reading

ERIC Educational Resources Information Center

Linderholm, Tracy; Gernsbacher, Morton Ann; van den Broek, Paul; Neninde, Lana; Robertson, Rachel R. W.; Sundermier, Brian

2004-01-01

The objective of this study was to determine how readers process narrative texts when the main character has multiple, and changing, goals. Readers must keep track of such goals to understand the causal relations between text events, an important process for comprehension. The structure building framework theory of reading proposes that readers…

Evaluation Methods of The Text Entities

ERIC Educational Resources Information Center

Popa, Marius

2006-01-01

The paper highlights some evaluation methods to assess the quality characteristics of the text entities. The main concepts used in building and evaluation processes of the text entities are presented. Also, some aggregated metrics for orthogonality measurements are presented. The evaluation process for automatic evaluation of the text entities is…

PLAN SECTIONS AND ELEVATIONS OF VESSEL SAMPLING STATIONS "P", "Q", ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PLAN SECTIONS AND ELEVATIONS OF VESSEL SAMPLING STATIONS "P", "Q", "S" CELLS MAIN PROCESSING BUILDING (CPP-601). INL DRAWING NUMBER 200-0601-00-291-053694. ALTERNATE ID NUMBER CPP-E-1394. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

Energy-Performance-Based Design-Build Process: Strategies for Procuring High-Performance Buildings on Typical Construction Budgets: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scheib, J.; Pless, S.; Torcellini, P.

NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy usemore » requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.« less

Building an ontology of pulmonary diseases with natural language processing tools using textual corpora.

PubMed

Baneyx, Audrey; Charlet, Jean; Jaulent, Marie-Christine

2007-01-01

Pathologies and acts are classified in thesauri to help physicians to code their activity. In practice, the use of thesauri is not sufficient to reduce variability in coding and thesauri are not suitable for computer processing. We think the automation of the coding task requires a conceptual modeling of medical items: an ontology. Our task is to help lung specialists code acts and diagnoses with software that represents medical knowledge of this concerned specialty by an ontology. The objective of the reported work was to build an ontology of pulmonary diseases dedicated to the coding process. To carry out this objective, we develop a precise methodological process for the knowledge engineer in order to build various types of medical ontologies. This process is based on the need to express precisely in natural language the meaning of each concept using differential semantics principles. A differential ontology is a hierarchy of concepts and relationships organized according to their similarities and differences. Our main research hypothesis is to apply natural language processing tools to corpora to develop the resources needed to build the ontology. We consider two corpora, one composed of patient discharge summaries and the other being a teaching book. We propose to combine two approaches to enrich the ontology building: (i) a method which consists of building terminological resources through distributional analysis and (ii) a method based on the observation of corpus sequences in order to reveal semantic relationships. Our ontology currently includes 1550 concepts and the software implementing the coding process is still under development. Results show that the proposed approach is operational and indicates that the combination of these methods and the comparison of the resulting terminological structures give interesting clues to a knowledge engineer for the building of an ontology.

Plug and Process Loads Capacity and Power Requirements Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheppy, M.; Gentile-Polese, L.

2014-09-01

This report addresses gaps in actionable knowledge that would help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. Limited initial data, however, suggest that actual PPL densities in leased buildings are substantially lower. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems. Better guidance will enable improved sizing and design of these systems, decrease upfront capital costs, and allow systems to operate more energy efficiently. The main focus ofmore » this report is to provide industry with reliable, objective third-party guidance to address the information gap in typical PPL densities for commercial building tenants. This could drive changes in negotiations about PPL energy demands.« less

Value of Collaboration With Standardized Patients and Patient Facilitators in Enhancing Reflection During the Process of Building a Simulation.

PubMed

Stanley, Claire; Lindsay, Sally; Parker, Kathryn; Kawamura, Anne; Samad Zubairi, Mohammad

2018-05-09

We previously reported that experienced clinicians find the process of collectively building and participating in simulations provide (1) a unique reflective opportunity; (2) a venue to identify different perspectives through discussion and action in a group; and (3) a safe environment for learning. No studies have assessed the value of collaborating with standardized patients (SPs) and patient facilitators (PFs) in the process. In this work, we describe this collaboration in building a simulation and the key elements that facilitate reflection. Three simulation scenarios surrounding communication were built by teams of clinicians, a PF, and SPs. Six build sessions were audio recorded, transcribed, and thematically analyzed through an iterative process to (1) describe the steps of building a simulation scenario and (2) identify the key elements involved in the collaboration. The five main steps to build a simulation scenario were (1) storytelling and reflection; (2) defining objectives and brainstorming ideas; (3) building a stem and creating a template; (4) refining the scenario with feedback from SPs; and (5) mock run-throughs with follow-up discussion. During these steps, the PF shared personal insights, challenging participants to reflect deeper to better understand and consider the patient's perspective. The SPs provided unique outside perspective to the group. In addition, the interaction between the SPs and the PF helped refine character roles. A collaborative approach incorporating feedback from PFs and SPs to create a simulation scenario is a valuable method to enhance reflective practice for clinicians.

Interior. Apparatus used in crushing and processing plant fibers to ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior. Apparatus used in crushing and processing plant fibers to extract latex from the sap during experiments to find native North American plant which would yield sufficiently high percentage of latex to produce natural rubber. - Thomas A. Edison Laboratories, Building No. 2, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

OVERVIEW OF REMAINS OF DEWATERING BUILDING, LOOKING SOUTH TOWARD CYANIDE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

OVERVIEW OF REMAINS OF DEWATERING BUILDING, LOOKING SOUTH TOWARD CYANIDE PROCESSING AREA. WATER USED IN PROCESSING AT THE STAMP MILL WAS CIRCULATED HERE FOR RECLAMATION. SANDS WERE SETTLED OUT AND DEPOSITED IN ONE OF TWO TAILINGS HOLDING AREAS. CLEARED WATER WAS PUMPED BACK TO THE MILL FOR REUSE. THIS PROCESS WAS ACCOMPLISHED BY THE USE OF SETTLING CONES, EIGHT FEET IN DIAMETER AND SIX FEET HIGH. THE REMAINS OF FOUR CONES ARE AT CENTER, BEHIND THE TANK IN THE FOREGROUND. TO THE LEFT IS THE MAIN ACCESS ROAD BETWEEN THE MILL AND THE PARKING LOT. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

Aparajita Orissa.

PubMed

Mukhopadhyay, Alok

2007-01-01

Following the 1999 cyclone, which devastated important areas in the state of Orissa, India, the Voluntary Health Association of India (VHAI) established Aparajita as the long-term aid and reconstruction programme. Aparajita aims at empowering the local community and building their capacity to recover from devastation and prepare for future natural disasters. The programme operates in three main areas of the state: Jagatsinghpur, Kendrapara and Puri. After an assessment study of the damage and the communities' socio-economic and health status, Aparajita focused its interventions on livelihood support, infrastructure development, capacity building, savings and credit, and health interventions. This programme has served to establish the basis of a disaster management process, which includes two main components, preparedness and relief. Given the number of natural adversities in India, there is a need to both empower the communities in the management process, as well as influence government to support and institutionalise initiatives like Aparajita.

Building a Vision for the Future of Career and Technical Education in Maine. A Report on the CTE Visioning Conference (Portland, Maine, June 15-17, 2004)

ERIC Educational Resources Information Center

Maine Department of Education, 2004

2004-01-01

This report documents the three-day conference held on June 15-17, 2004, in which approximately 80 stakeholders in Maine's Career and Technical Education system (CTE) gathered at the Portland Arts and Technology High School to begin a process intended to produce a strategic plan for CTE by the fall of 2004. Over the summer, the statewide CTE…

An action research approach for developing research and innovation in nursing and midwifery practice: building research capacity in one NHS foundation trust.

PubMed

Moore, Jenny; Crozier, Kenda; Kite, Katharine

2012-01-01

The National Health Service in the United Kingdom is committed to a process of reform centred on quality care and innovative practice. Central to this process is the need for research capacity building within the workforce. The aim of this study was to develop an infrastructure for research capacity building within one National Health Service Foundation Trust. Using an Action Research methodology, sixteen individuals were purposefully selected from a population of nurses and midwives to participate in the study. This nonprobability sampling method enabled the researchers to select participants on the basis of who would be most informative about existing research capacity building structures and processes within the Trust. Data were collected in the form of semi-structured individual interviews with each participant. The main findings were that research activity was not embedded in the culture of the organisation, and initiating and undertaking change was a complex process. As a result, a range of structures and processes which were considered necessary to enable the Trust move forward in developing capacity and capability for research were developed and implemented. This paper reports the first two stages of this process, namely: the findings from the pre-step and an outline of how these findings were used to create an infrastructure to support research capacity building within one NHS Foundation Trust Hospital in the United Kingdom. Copyright © 2011 Elsevier Ltd. All rights reserved.

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

Participants in the ribbon cutting for KSC's new 34,600-square- foot Space Shuttle Main Engine Processing Facility (SSMEPF) pose in front of a Space Shuttle Main Engine on display for the ceremony. From left, they are Ed Adamek, vice president and associate program manager for Ground Operations of United Space Alliance; John Plowden, vice president of Rocketdyne; Donald R. McMonagle, manager of Launch Integration; U.S. Congressman Dave Weldon; KSC Center Director Roy D. Bridges Jr.; Wade Ivey of Ivey Construction, Inc.; and Robert B. Sieck, director of Shuttle Processing. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

Crowd-sourced data collection to support automatic classification of building footprint data

NASA Astrophysics Data System (ADS)

Hecht, Robert; Kalla, Matthias; Krüger, Tobias

2018-05-01

Human settlements are mainly formed by buildings with their different characteristics and usage. Despite the importance of buildings for the economy and society, complete regional or even national figures of the entire building stock and its spatial distribution are still hardly available. Available digital topographic data sets created by National Mapping Agencies or mapped voluntarily through a crowd via Volunteered Geographic Information (VGI) platforms (e.g. OpenStreetMap) contain building footprint information but often lack additional information on building type, usage, age or number of floors. For this reason, predictive modeling is becoming increasingly important in this context. The capabilities of machine learning allow for the prediction of building types and other building characteristics and thus, the efficient classification and description of the entire building stock of cities and regions. However, such data-driven approaches always require a sufficient amount of ground truth (reference) information for training and validation. The collection of reference data is usually cost-intensive and time-consuming. Experiences from other disciplines have shown that crowdsourcing offers the possibility to support the process of obtaining ground truth data. Therefore, this paper presents the results of an experimental study aiming at assessing the accuracy of non-expert annotations on street view images collected from an internet crowd. The findings provide the basis for a future integration of a crowdsourcing component into the process of land use mapping, particularly the automatic building classification.

Savannah River Plant engineering and design history. Volume 4: 300/700 Areas & general services and facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1957-01-01

The primary function of the 300 Area is the production and preparation of the fuel and target elements required for the 100 Area production reactors. Uranium slugs and lithium-aluminium alloy control and blanket rods are prepared in separate structures. Other facilities include a test pile, a physics assembly laboratory, an office and change house, an electrical substation, and various service facilities such as rail lines, roads, sewers, steam and water distribution lines, etc. The 700 Area contains housing and facilities for plant management, general plant services, and certain technical activities. The technical buildings include the Main Technical Laboratory, the Wastemore » Concentration Building, the Health Physics Headquarters, and the Health Physics Calibration building. Sections of this report describe the following: development of the 300-M Area; selection and description of process; design of main facilities of the 300 Area; development of the 700-A Area; design of the main facilities of the 700 Area; and general services and facilities, including transportation, plant protection, waste disposal and drainage, site work, pilot plants, storage, and furniture and fixtures.« less

Engineering Change Management Method Framework in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

Challenges of Teaching Computer Science in Transition Countries: Albanian University Case

ERIC Educational Resources Information Center

Sotirofski, Kseanela; Kukeli, Agim; Kalemi, Edlira

2010-01-01

The main objective of our study is to determine the challenges faced during the process of teaching Computer Science in a university of a country in transition and make suggestions to improve this teaching process by perfecting the necessary conditions. Our survey builds on the thesis that we live in an information age; information technology is…

Green Schools as High Performance Learning Facilities

ERIC Educational Resources Information Center

Gordon, Douglas E.

2010-01-01

In practice, a green school is the physical result of a consensus process of planning, design, and construction that takes into account a building's performance over its entire 50- to 60-year life cycle. The main focus of the process is to reinforce optimal learning, a goal very much in keeping with the parallel goals of resource efficiency and…

KSC-2011-2614

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. - A panoramic photo shows space shuttle Discovery during the main engine removal phase in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. NASA/Frankie Martin

Halophilic Microorganisms Are Responsible for the Rosy Discolouration of Saline Environments in Three Historical Buildings with Mural Paintings

PubMed Central

Ettenauer, Jörg D.; Jurado, Valme; Piñar, Guadalupe; Miller, Ana Z.; Santner, Markus; Saiz-Jimenez, Cesareo; Sterflinger, Katja

2014-01-01

A number of mural paintings and building materials from monuments located in central and south Europe are characterized by the presence of an intriguing rosy discolouration phenomenon. Although some similarities were observed among the bacterial and archaeal microbiota detected in these monuments, their origin and nature is still unknown. In order to get a complete overview of this biodeterioration process, we investigated the microbial communities in saline environments causing the rosy discolouration of mural paintings in three Austrian historical buildings using a combination of culture-dependent and -independent techniques as well as microscopic techniques. The bacterial communities were dominated by halophilic members of Actinobacteria, mainly of the genus Rubrobacter. Representatives of the Archaea were also detected with the predominating genera Halobacterium, Halococcus and Halalkalicoccus. Furthermore, halophilic bacterial strains, mainly of the phylum Firmicutes, could be retrieved from two monuments using special culture media. Inoculation of building materials (limestone and gypsum plaster) with selected isolates reproduced the unaesthetic rosy effect and biodeterioration in the laboratory. PMID:25084531

9. Historic American Buildings Survey E. W. Russell, Photographer, February ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Historic American Buildings Survey E. W. Russell, Photographer, February 28, 1935 MAIN BUILDING (ADMINISTRATION) WEST - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

Supporting Teachers to Automatically Build Accessible Pedagogical Resources: The APEINTA Project

NASA Astrophysics Data System (ADS)

Iglesias, Ana; Moreno, Lourdes; Jiménez, Javier

Most of the universities in Europe have started their process of adaptation towards a common educational space according to the European Higher Education Area (EHEA). The social dimension of the Bologna Process is a constituent part of the EHEA and it is a necessary condition for the attractiveness and competitiveness of the EHEA. Two of the main features of the social dimension are the equal access for all the students and the lifelong learning. One of the main problems of the adaptation process to the EHEA is that the teachers have no previous references and models to develop new pedagogical experiences accessible to all the students, nevertheless of their abilities, capabilities or accessibility characteristics. The APEINTA project presented in this paper can be used as a helpful tool for teachers in order to cope with the teaching demands of EHEA, helping the teachers to automatically build accessible pedagogical resources even when the teachers are not accessibility experts. This educational project has been successfully used in 2009 in two different degrees at the Carlos III University of Madrid: Computer Science and Library and Information Science.

18. Walkway between maintenance building and office building along south ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Walkway between maintenance building and office building along south side of main plant looking east - Skinner Meat Packing Plant, Main Plant, 6006 South Twenty-seventh Street, Omaha, Douglas County, NE

28. Historic American Buildings Survey E. W. Russell, Photographer, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. Historic American Buildings Survey E. W. Russell, Photographer, May 7, 1936 INTERIOR VIEW OF MAIN ENTRANCE TO MAIN HALL, 1st FLOOR - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

Laser Metal Deposition as Repair Technology for a Gas Turbine Burner Made of Inconel 718

NASA Astrophysics Data System (ADS)

Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael

Maintenance, repair and overhaul of components are of increasing interest for parts of high complexity and expensive manufacturing costs. In this paper a production process for laser metal deposition is presented, and used to repair a gas turbine burner of Inconel 718. Different parameters for defined track geometries were determined to attain a near net shape deposition with consistent build-up rate for changing wall thicknesses over the manufacturing process. Spot diameter, powder feed rate, welding velocity and laser power were changed as main parameters for a different track size. An optimal overlap rate for a constant layer height was used to calculate the best track size for a fitting layer width similar to the part dimension. Deviations in width and height over the whole build-up process were detected and customized build-up strategies for the 3D sequences were designed. The results show the possibility of a near net shape repair by using different track geometries with laser metal deposition.

11. VIEW NORTH, SOUTH FRONT OF MAIN OFFICE UNIT (BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. VIEW NORTH, SOUTH FRONT OF MAIN OFFICE UNIT (BUILDING I, 2); SOUTH AND EAST FRONTS OF SEED STORAGE BUILDING (BUILDING 21); EAST FRONT OF GREENHOUSE #1 (BUILDING 5) - U.S. Plant Introduction Station, 11601 Old Pond Road, Glenn Dale, Prince George's County, MD

Modeling Business Processes of the Social Insurance Fund in Information System Runa WFE

NASA Astrophysics Data System (ADS)

Kataev, M. Yu; Bulysheva, L. A.; Xu, Li D.; Loseva, N. V.

2016-08-01

Introduction - Business processes are gradually becoming a tool that allows you at a new level to put employees or to make more efficient document management system. In these directions the main work, and presents the largest possible number of publications. However, business processes are still poorly implemented in public institutions, where it is very difficult to formalize the main existing processes. Us attempts to build a system of business processes for such state agencies as the Russian social insurance Fund (SIF), where virtually all of the processes, when different inputs have the same output: public service. The parameters of the state services (as a rule, time limits) are set by state laws and regulations. The article provides a brief overview of the FSS, the formulation of requirements to business processes, the justification of the choice of software for modeling business processes and create models of work in the system Runa WFE and optimization models one of the main business processes of the FSS. The result of the work of Runa WFE is an optimized model of the business process of FSS.

View looking east in the main pipe mill building at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View looking east in the main pipe mill building at the operators pulpit of the east-west reelers, no. 2 seamless line. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2012 CFR

2012-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2010 CFR

2010-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2014 CFR

2014-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2013 CFR

2013-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2011 CFR

2011-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

7. INTERIOR OF SOUTH MAIN BUILDING ROOM AND OPEN DOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. INTERIOR OF SOUTH MAIN BUILDING ROOM AND OPEN DOOR TO SHED ADDITION, OPEN DOOR TO NORTH MAIN BUILDING ROOM, AND CLOSED DOOR TO BATHROOM. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Control Station, Hydrographer's Office, Bishop Creek, Bishop, Inyo County, CA

Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry.

PubMed

Revilla-León, Marta; Özcan, Mutlu

2018-04-22

There are 7 categories of additive manufacturing (AM) technologies, and a wide variety of materials can be used to build a CAD 3D object. The present article reviews the main AM processes for polymers for dental applications: stereolithography (SLA), digital light processing (DLP), material jetting (MJ), and material extrusion (ME). The manufacturing process, accuracy, and precision of these methods will be reviewed, as well as their prosthodontic applications. © 2018 by the American College of Prosthodontists.

Building Construction Progress Monitoring Using Unmanned Aerial System (uas), Low-Cost Photogrammetry, and Geographic Information System (gis)

NASA Astrophysics Data System (ADS)

Bognot, J. R.; Candido, C. G.; Blanco, A. C.; Montelibano, J. R. Y.

2018-05-01

Monitoring the progress of building's construction is critical in construction management. However, measuring the building construction's progress are still manual, time consuming, error prone, and impose tedious process of analysis leading to delays, additional costings and effort. The main goal of this research is to develop a methodology for building construction progress monitoring based on 3D as-built model of the building from unmanned aerial system (UAS) images, 4D as-planned model (with construction schedule integrated) and, GIS analysis. Monitoring was done by capturing videos of the building with a camera-equipped UAS. Still images were extracted, filtered, bundle-adjusted, and 3D as-built model was generated using open source photogrammetric software. The as-planned model was generated from digitized CAD drawings using GIS. The 3D as-built model was aligned with the 4D as-planned model of building formed from extrusion of building elements, and integration of the construction's planned schedule. The construction progress is visualized via color-coding the building elements in the 3D model. The developed methodology was conducted and applied from the data obtained from an actual construction site. Accuracy in detecting `built' or `not built' building elements ranges from 82-84 % and precision of 50-72 %. Quantified progress in terms of the number of building elements are 21.31% (November 2016), 26.84 % (January 2017) and 44.19 % (March 2017). The results can be used as an input for progress monitoring performance of construction projects and improving related decision-making process.

Index Compression and Efficient Query Processing in Large Web Search Engines

ERIC Educational Resources Information Center

Ding, Shuai

2013-01-01

The inverted index is the main data structure used by all the major search engines. Search engines build an inverted index on their collection to speed up query processing. As the size of the web grows, the length of the inverted list structures, which can easily grow to hundreds of MBs or even GBs for common terms (roughly linear in the size of…

This photograph, taken from the main roof of E Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

This photograph, taken from the main roof of E Building, looking north, shows two metal penthouses at right, a similar brick structure and some of the vents and other mechanical devices of the building - Department of Energy, Mound Facility, Electronics Laboratory Building (E Building), One Mound Road, Miamisburg, Montgomery County, OH

Interim Final Report for the Strengthening Retrofit Markets for Comprehensive Savings in Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meinking, Rick; Adamson, Joy M

2013-12-20

Energy efficiency is vitally important in Maine. Nearly 70% of Maine households rely on fuel oil as their primary energy source for home heating, a higher share than in any other state. Coupled with the state's long, cold winters, Maine's dependence on oil renders homeowners particularly vulnerable to fluctuating fuel costs. With $4.5 million in seed funding from the Energy Department's Better Buildings Neighborhood Program, the Governor's Energy Office (GEO), through Efficiency Maine Trust (the Trust), is spurring Maine landlords to lower their monthly energy bills and improve comfort for their tenants during the state's cold winter months and increasinglymore » warmer summers. Maine's aging multifamily housing stock can be expensive to heat and costly to maintain. It is not unusual to find buildings with little or no insulation, drafty windows, and significant air leaks, making them ideal candidates for energy efficiency upgrades. Maine modeled its Multifamily Efficiency Program (MEP) after the state's highly successful Home Energy Savings Program (HESP) for single-family homes. HESP provided cash incentives and financing opportunities to owners of one-to four-unit structures, which resulted in thousands of energy assessments and whole-house energy upgrades in 225 communities. Maine's new MEP multifamily energy efficiency upgrade and weatherization initiative focuses on small to medium-sized (i.e., five to 20 units) apartment buildings. The program's energy efficiency upgrades will provide at least 20% energy savings for each upgraded multifamily unit. The Trust’s MEP relies on a network of approved program partners who help move projects through the pipeline from assessment to upgrade. MEP has two components: benchmarking and development of an Energy Reduction Plan (ERP). Using the ENERGY STAR® Portfolio Manager benchmarking tool, MEP provides an assessment of current energy usage in the building, establishes a baseline for future energy efficiency improvements, and enables tracking and monitoring of future energy usage at the building— all at no cost to the building owner. The ERP is developed by a program partner using either the Trust’s approved modeling or prescriptive tools; it provides detailed information about the current energyrelated conditions in the building and recommends energy efficiency, health, and safety improvements. The Trust's delivery contractor provides quality assurance and controls throughout the process. Through this effort, MEP's goal is to establish a self-sustaining, market-driven program, demonstrating the value of energy efficiency to other building owners. The increasing value of properties across the state will help incentivize these owners to continue upgrades after the grant period has ended. Targeting urban areas in Maine with dense clusters of multifamily units—such as Portland, Lewiston- Auburn, Bangor, and Augusta—MEP engaged a variety of stakeholder groups early on to design its multifamily program. Through direct emails and its website, program officials invited lending institutions, building professionals, engineering firms, equipment distributors, and local property owners associations to attend open meetings around the state to learn about the goals of the multifamily program and to help define its parameters. These meetings helped program administrators understand the diversity of the customer base: some owners are individuals with a single building, while other owners are groups of people or management companies with an entire portfolio of multifamily buildings. The diversity of the customer base notwithstanding, owners see MEP as an opportunity to make gains in their respective properties. Consistently high turnouts at stakeholder meetings fueled greater customer interest as awareness of the program spread through word of mouth. The program also gained traction by utilizing the program partner networks and building on the legacy of the Trust’s successful HESP for single-family residences. MEP offers significant incentives for building owners to participate in the upgrade program. Wholebuilding benchmarking services are available to most multifamily housing buildings free of charge. The service provides the building owner with an assessment of the building's current energy efficiency as compared to other multifamily buildings on a national scale, establishes a baseline to measure future improvements, and enables owners to track monthly energy consumption using the ENERGY STAR Portfolio Manager. Once the benchmarking process is complete, the program links building owners with approved program partners (e.g., energy professionals, home performance contractors) to identify and implement specific energy-saving opportunities in the building. Program partners can also provide project quotes with estimated financing incentives and payback period calculations that enable building owners to make informed decisions. What's more, the Trust provides two financial incentives for successful completion of program milestones. The first is a per-unit incentive for completion of an approved ERP (i.e., $100 per unit if a prescriptive path is followed, and $200 per unit for a modeled ERP). Upon final inspection of the installed project scope of work, an incentive of $1,400 per unit or 50% of installed cost—whichever is less—is paid. The Trust originally established a $1 million loan-loss reserve fund (LLRF) to further enhance financing opportunities for qualified multifamily building owners. This funding mechanism was designed to connect building owners with lenders that retain the mortgages for their properties and encourages the lenders to offer financing for energy efficiency improvements. However, there has been no interest in the LLRF and therefore the LLRF has been reduced. Ultimately, MEP plans to build an online tool for building owners to assess opportunities to make upgrades in their multifamily units. The tool will include a performance rating system to provide a way for building owners to more easily understand energy use in their building, and how it could be improved with energy efficiency upgrades. Prospective tenants will also be able to use the rating system to make informed decisions about where to rent. Furthermore, the rating can be incorporated into real estate listings as a way for prospective home buyers and the real estate financial community to evaluate a home's operating costs. The Trust’s MEP has identified the state's most experienced energy professionals, vendors, suppliers, and contractors that install energy efficiency equipment in the multifamily sector to be qualified program partners. To be eligible for partnership, energy assessment professionals and contractors are required to have demonstrated experience in the multifamily sector and hold associated professional certifications, such as Building Operator Certification (BOC), Certified Energy Manager (CEM), Professional Engineer (PE), or Building Performance Institute (BPI) Multifamily Building Analyst. Widespread program interest has enabled the Trust to redirect funds that might otherwise be needed for program promotion to building capacity through contractor training. In addition to boosting professional training and certification opportunities, MEP teaches its partners how to market the multifamily program to prospective multifamily homeowners.« less

The Style As a Factor of Office Building Concentration Locations in European Cities

NASA Astrophysics Data System (ADS)

Bocian, Anna

2017-03-01

Where should office building concentrations be located in cities? What kind of factors has an influence on its locations? The aim of the research is to examine factors of office locations in cities. Selected office building concentrations in European cities were investigated as case studies. The research method was the spatial decision paradigm. The style, one of the main elements of the paradigm, was selected to answer the research question. The style was defined a composition of existing urban structures. Basic elements of urban composition in selected European cities were examined closely. Research results are conditions of office building concentration locations in European cities in term of urban composition. Such knowledge should be a base of decision-making processe during preparing master plans and city development plans.

KSC-98pc783

NASA Image and Video Library

1998-07-06

KSC Center Director Roy D. Bridges Jr. and U.S. Congressman Dave Weldon (holding scissors) cut the ribbon at a ceremony on July 6 to open KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF). Joining in the ribbon cutting are (left) Ed Adamek, vice president and associate program manager for Ground Operations of United Space Alliance; Marvin L. Jones, director of Installation Operations; Donald R. McMonagle, manager of Launch Integration; (right) Wade Ivey of Ivey Construction, Inc.; Robert B. Sieck, director of Shuttle Processing; and John Plowden, vice president of Rocketdyne. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

KSC Center Director Roy D. Bridges Jr. and U.S. Congressman Dave Weldon (holding scissors) cut the ribbon at a ceremony on July 6 to open KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF). Joining in the ribbon cutting are (left) Ed Adamek, vice president and associate program manager for Ground Operations of United Space Alliance; Marvin L. Jones, director of Installation Operations; Donald R. McMonagle, manager of Launch Integration; (right) Wade Ivey of Ivey Construction, Inc.; Robert B. Sieck, director of Shuttle Processing; and John Plowden, vice president of Rocketdyne. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

Source apportionment of stack emissions from research and development facilities using positive matrix factorization

NASA Astrophysics Data System (ADS)

Ballinger, Marcel Y.; Larson, Timothy V.

2014-12-01

Research and development (R&D) facility emissions are difficult to characterize due to their variable processes, changing nature of research, and large number of chemicals. Positive matrix factorization (PMF) was applied to volatile organic compound (VOC) concentrations measured in the main exhaust stacks of four different R&D buildings to identify the number and composition of major contributing sources. PMF identified between 9 and 11 source-related factors contributing to stack emissions, depending on the building. Similar factors between buildings were major contributors to trichloroethylene (TCE), acetone, and ethanol emissions; other factors had similar profiles for two or more buildings but not all four. At least one factor for each building was identified that contained a broad mix of many species and constraints were used in PMF to modify the factors to resemble more closely the off-shift concentration profiles. PMF accepted the constraints with little decrease in model fit.

Issues on Building Kazakhstan Geospatial Portal to Implement E-Government

NASA Astrophysics Data System (ADS)

Sagadiyev, K.; Kang, H. K.; Li, K. J.

2016-06-01

A main issue in developing e-government is about how to integrate and organize many complicated processes and different stakeholders. Interestingly geospatial information provides an efficient framework to integrate and organized them. In particular, it is very useful to integrate the process of land management in e-government with geospatial information framework, since most of land management tasks are related with geospatial properties. In this paper, we present a use-case on the e-government project in Kazakhstan for land management. We develop a geoportal to connect many tasks and different users via geospatial information framework. This geoportal is based on open source geospatial software including GeoServer, PostGIS, and OpenLayers. With this geoportal, we expect three achievements as follows. First we establish a transparent governmental process, which is one of main goal of e-government. Every stakeholder monitors what is happening in land management process. Second, we can significantly reduce the time and efforts in the government process. For example, a grant procedure for a building construction has taken more than one year with more than 50 steps. It is expected that this procedure would be reduced to 2 weeks by the geoportal framework. Third we provide a collaborative environment between different governmental structures via the geoportal, while many conflicts and mismatches have been a critical issue of governmental administration processes.

1. Historic American Buildings Survey Copied by E. W. Russell, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Historic American Buildings Survey Copied by E. W. Russell, Photographer, August 31, 1936 75TH ANNIVERSARY YEARBOOK (NOT COPYRIGHT) - FRONT OF MAIN BUILDING BEFORE CLOISTER ARCADE WAS ADDED - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

1. EXTERIOR OF BUILDING 125 FROM MAIN PLANT 4 RESIDENTIAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. EXTERIOR OF BUILDING 125 FROM MAIN PLANT 4 RESIDENTIAL STREET SHOWING BUILDING AT PHOTO RIGHT CENTER (WITH WHITE JEEP PARKED IN FRONT) BETWEEN WORKER COTTAGE (BUILDING 115) AT PHOTO LEFT AND RECREATION HALL (BUILDING 109) AT PHOTO RIGHT. VIEW TO SOUTH. - Bishop Creek Hydroelectric System, Plant 4, Lightning Arrestor Vault, Bishop Creek, Bishop, Inyo County, CA

Systems to support health technology assessment (HTA) in member states of the European union with limited institutionalization of HTA.

PubMed

Moharra, Montse; Espallargues, Mireia; Kubesch, Nadine; Estrada, Maria-Dolors; Parada, Antoni; Vondeling, Hindrik; Lo Scalzo, Alessandra; Cristofides, Stelios; Turk, Eva; Raab, Martin

2009-12-01

The aim of this study was to support health technology assessment (HTA) capacity building in Member States of the European Union with limited experience or without institutionalized HTA. The main output is a Handbook on HTA Capacity Building. The methods used were worldwide surveys of (i) HTA organizations, (ii) information management units, and (iii) HTA educational programs. The results of two surveys (i & ii) were combined with expert opinion to produce the Handbook on HTA Capacity Building. Survey of HTA organizations (n = 41, response rate 35 percent). Most of the organizations were established by the government (61 percent), and all were not-for-profit. Working on HTA (80.5 percent) and doing research (63.4 percent) were the main lines of activity. Survey on information management units (n = 23, response rate 23 percent). Most (74.2 percent) of the responding HTA agencies reported having personnel dedicated to HTA information services. Survey on HTA educational programs (n = 48, response rate 60 percent). In total, nine Master of Science (MSc) programs were identified (three MSc in HTA and six MSc in HTA-related areas). Handbook on HTA Capacity Building. A group of twenty experts from thirteen countries developed the handbook. It consists of nine chapters focusing on HTA institutional development (structural setup, work processes, and visibility). Setting up organizational structures and establishing effective HTA programs that guide key policy decisions is a challenging task. There are no standard models or pathways. "One size fits all" is not a useful principle because of the wide systemic and cultural differences between countries. The Handbook on HTA Capacity Building includes approaches for overall institutional development, especially in formulating objectives, setting up structures, and defining work processes.

The choice of primary energy source including PV installation for providing electric energy to a public utility building - a case study

NASA Astrophysics Data System (ADS)

Radomski, Bartosz; Ćwiek, Barbara; Mróz, Tomasz M.

2017-11-01

The paper presents multicriteria decision aid analysis of the choice of PV installation providing electric energy to a public utility building. From the energy management point of view electricity obtained by solar radiation has become crucial renewable energy source. Application of PV installations may occur a profitable solution from energy, economic and ecologic point of view for both existing and newly erected buildings. Featured variants of PV installations have been assessed by multicriteria analysis based on ANP (Analytic Network Process) method. Technical, economical, energy and environmental criteria have been identified as main decision criteria. Defined set of decision criteria has an open character and can be modified in the dialog process between the decision-maker and the expert - in the present case, an expert in planning of development of energy supply systems. The proposed approach has been used to evaluate three variants of PV installation acceptable for existing educational building located in Poznań, Poland - the building of Faculty of Chemical Technology, Poznań University of Technology. Multi-criteria analysis based on ANP method and the calculation software Super Decisions has proven to be an effective tool for energy planning, leading to the indication of the recommended variant of PV installation in existing and newly erected public buildings. Achieved results show prospects and possibilities of rational renewable energy usage as complex solution to public utility buildings.

Building United Judgment: A Handbook for Consensus Decision Making.

ERIC Educational Resources Information Center

Avery, Michel; And Others

This handbook contains techniques that will help community groups or other organizations use consensus decision making. The layout of the handbook is a scrambled montage of "main text" and boxes containing personal statements, examples, artifacts from the writing process, and additional bits of information. Chapter one introduces…

Make an Earthquake: Ground Shaking!

ERIC Educational Resources Information Center

Savasci, Funda

2011-01-01

The main purposes of this activity are to help students explore possible factors affecting the extent of the damage of earthquakes and learn the ways to reduce earthquake damages. In these inquiry-based activities, students have opportunities to develop science process skills and to build an understanding of the relationship among science,…

EIA models and capacity building in Viet Nam: an analysis of development aid programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doberstein, Brent

2004-04-01

There has been a decided lack of empirical research examining development aid agencies as 'agents of change' in environmental impact assessment (EIA) systems in developing countries, particularly research examining the model of environmental planning practice promoted by aid agencies as part of capacity building. This paper briefly traces a conceptual framework of EIA, then introduces the concept of 'EIA capacity building'. Using Viet Nam as a case study, the paper then outlines the empirical results of the research, focusing on the extent to which aid agency capacity-building programs promoted a Technical vs. Planning Model of EIA and on the coherencemore » of capacity-building efforts across all aid programs. A discussion follows, where research results are interpreted within the Vietnamese context, and implications of research results are identified for three main groups of actors. The paper concludes by calling for development aid agencies to reconceptualise EIA capacity building as an opportunity to transform developing countries' development planning processes.« less

KSC-2011-2599

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. NASA/Jim Grossmann

KSC-2011-2600

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. NASA/Jim Grossmann

KSC-2011-2598

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. NASA/Jim Grossmann

KSC-2011-2597

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. NASA/Jim Grossmann

36. Waiting area at main entry to building 500, Awing, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. Waiting area at main entry to building 500, A-wing, looking southeast - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

5. ENGINE TEST CELL BUILDING INTERIOR. CENTRAL ROOM ON MAIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. ENGINE TEST CELL BUILDING INTERIOR. CENTRAL ROOM ON MAIN FLOOR. LOOKING NORTHWEST. - Fairchild Air Force Base, Engine Test Cell Building, Near intersection of Arnold Street & George Avenue, Spokane, Spokane County, WA

25. Historic American Buildings Survey E. W. Russell, Photographer, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. Historic American Buildings Survey E. W. Russell, Photographer, May 7, 1936 FRONT ENTRANCE DOOR TO WEST OF MAIN ENTRANCE - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

14 million hours of operational experience on phosphate ester fluids as gas turbine main bearing lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dufresne, P.E.

1998-09-01

Phosphate ester fluids have been used as a gas turbine main bearing lubricant for more than 35 years. Acid treatment systems utilizing fullers` earth and activated alumina have been used to remove acids produced during the PE fluid degradation process on an intermittent or continuous basis. Both acid adsorbing medias contribute metal soaps during the acid adsorbing process. Over time, the build-up of metal soaps significantly reduces the capability of the media to adsorb acids. The end result is escalating acid levels and fluid operating problems. The introduction of ion exchange as an acid adsorbing media has eliminated the catalyticmore » fluid degradation process, and offers phosphate ester users` extremely long fluid service life.« less

General perspective view of Vale Commercial Historic District's historiccontributing buildings ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General perspective view of Vale Commercial Historic District's historic-contributing buildings (from left to right: Buildings P, L, and K), located on A Street between Court and Main Streets, view looking southeast - Vale Commercial Historic District, A Street between Holland & Longfellow Streets, north side of B Street between Holland & Main Streets, Main Street South from A Street through B Street, & Stone House at 283 Main Street South, Vale, Malheur County, OR

Modeling work of the dispatching service of high-rise building as queuing system

NASA Astrophysics Data System (ADS)

Dement'eva, Marina; Dement'eva, Anastasiya

2018-03-01

The article presents the results of calculating the performance indicators of the dispatcher service of a high-rise building as a queuing system with an unlimited queue. The calculation was carried out for three models: with a single control room and brigade of service, with a single control room and a specialized service, with several dispatch centers and specialized services. The aim of the work was to investigate the influence of the structural scheme of the organization of the dispatcher service of a high-rise building on the amount of operating costs and the time of processing and fulfilling applications. The problems of high-rise construction and their impact on the complication of exploitation are analyzed. The composition of exploitation activities of high-rise buildings is analyzed. The relevance of the study is justified by the need to review the role of dispatch services in the structure of management of the quality of buildings. Dispatching service from the lower level of management of individual engineering systems becomes the main link in the centralized automated management of the exploitation of high-rise buildings. With the transition to market relations, the criterion of profitability at the organization of the dispatching service becomes one of the main parameters of the effectiveness of its work. A mathematical model for assessing the efficiency of the dispatching service on a set of quality of service indicators is proposed. The structure of operating costs is presented. The algorithm of decision-making is given when choosing the optimal structural scheme of the dispatching service of a high-rise building.

Critical ICT-Inhibiting Factors on IBS Production Management Processes in the Malaysia Construction Industry

NASA Astrophysics Data System (ADS)

Ern, Peniel Ang Soon; Kasim, Narimah; Hamid, Zuhairi Abd; Chen, Goh Kai

2017-10-01

Industrialized Building System (IBS) is one of the approaches that had been introduced as an alternative to conventional building method where it becomes the new strategy of enhancing the sustainable construction in current industries while spearheading a huge advancement of benefits with green constructions into the existing industries. The IBS approach is actively promoted through several strategies and incentives as an alternative to conventional building methods. Extensive uptakes of modern Information Communication Technology (ICT) applications are able to support the different IBS processes for effective production. However, it is argued that ICT uptake at the organisational level is still in its infancy. This raises the importance to identify critical inhibitors which are inhibing the effective uptake of ICT in the IBS production management process. Critical inhibitors to ICT uptake were identified through questionnaire survey with the IBS industry stakeholders. The mean index and critical t-values are generated with the use of the quantitative tool, Statistical Package for Social Sciences (SPSS). The top ten priority ranked inhibitors reflect the Cost, People and Process elements to ICT uptake. High costs in acquiring the technologies and resistance to change were some main concerns from the findings.

Study of potential nonconformities of a new recreation center building's envelope

NASA Astrophysics Data System (ADS)

Stanescu, M.; Kajl, S.; Lamarche, L.

2016-09-01

This article presents a building envelope's analysis in order to verify the compliance with mandatory provisions of the Model National Energy Code for Buildings in Canada (MNECB 1997). Because some of the requirements are «not met», investigations were carried out to provide justifications in order to prove that the building can be considered as an exception to the mandatory provisions of MNECB. Therefore, we evaluate the impact of three (3) potential nonconformities of the building's walls on the building energy performance. In regards to article 3.1.1.1.4 of MNECB, there is an exception if it can be proved that permanent process (like heat recovery of refrigeration compressors) can produce at all times enough heat that no other heating source is required. First of all, by using simulation, we were able to indicate that almost all building's heating will be provided by energy recovery from ice rinks refrigeration systems (99.2%). Secondly, by using an energy analysis carried out with HEAT2 software, we can show that the increase of heating energy demand caused by the 3 studied walls is very low. This represents an increase of the heating energy demand of only 0.2%, and this, regardless of the heat recovery process. Because the nonconforming wall sections are small (0.97% of the envelope area), this mainly explains the minor impact in terms of building performance. In conclusion, according to the results obtained, we were able to recommend the building for consideration as an exception to the mandatory provisions of MNECB.

11. Historic American Buildings Survey Verlin Berry, Photographer October 21, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Historic American Buildings Survey Verlin Berry, Photographer October 21, 1977 121 NORTH MAIN STREET, FIRST FLOOR, VIEW OF PRESSED TIN CEILING - 121-125 North Main Street (Commercial Building), Mishawaka, St. Joseph County, IN

DETAIL OF MAIN ENTRANCE ON EAST (FRONT) ELEVATION OF BUILDING. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF MAIN ENTRANCE ON EAST (FRONT) ELEVATION OF BUILDING. view TO SOUTHWEST. - Plattsburgh Air Force Base, Target Intelligence Training Building-Combat Center, Off Connecticut Road, east of Idaho Avenue, Plattsburgh, Clinton County, NY

6. INTERIOR OF THE MAIN EQUIPMENT ROOM, AN/FPS66 ALPHA, BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR OF THE MAIN EQUIPMENT ROOM, AN/FPS66 ALPHA, BUILDING 408, LOOKING WEST. - Mill Valley Air Force Station, Operations Building & Annex, East Ridgecrest Boulevard, Mount Tamalpais, Mill Valley, Marin County, CA

5. Historic American Buildings Survey E. W. Russell, Photographer, February ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Historic American Buildings Survey E. W. Russell, Photographer, February 28, 1935 REAR VIEW OF MAIN BLDG. S.W. (REAR FACES S.) - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

Nutrition Leadership Development: Capacity-Building Initiatives in Iran and the Middle-East Region Since 2009

PubMed Central

Davari, Azadeh; Rashidi, Arash; Baartmans, Jacques Antonius

2015-01-01

Personal and organizational performance is determined by commitment and both technical and general competencies, including leadership skills. Academia, however, mainly targets technical aspects in its curricular programs. On the other hand, the inter-disciplinary and multi-sector nature of Nutrition necessitates high levels of collaboration between stakeholders. Leadership development is therefore required in Nutrition. This paper describes the endeavor made in Iran and the Middle-East region, aiming at building leadership capacity among nutrition professionals. The empowered human resource is expected to facilitate nutrition security at the national and regional levels. Since 2007, the development process of the initiative has begun through research, bench marking, and consultation. The “learning organizations,” “leadership from inside-out,” and “transformational leadership” frameworks have been employed as underpinning theories. Main topics have been self-awareness, effective communication, shared visioning, trust building, creativity, and motivating. Outbound team-building activities and coaching have also been included. The first workshop of the Iranian Food and Nutrition Leadership Program was held in 2009 in Tehran. The experience expanded to the region as the Middle-East Nutrition Leadership Program (MENLP). The Ph.D. Nutrition programs (at four leading Universities) and Iranian Nutrition Society have been taken as other opportunity windows to develop leadership competencies. Biannual Iranian nutrition congresses have been used as the main media for advocacy purposes. High-satisfaction rates obtained following each training activity. In short, the initiative on “nutrition leadership development” has received growing investment and positive feedback in Iran. Continuous improvement of the initiative, establishment of active alumni networks, building MENLP regional platform, and integrating a monitoring and evaluation system are required to increase the investment returns. PMID:26284232

Nutrition Leadership Development: Capacity-Building Initiatives in Iran and the Middle-East Region Since 2009.

PubMed

Davari, Azadeh; Rashidi, Arash; Baartmans, Jacques Antonius

2015-01-01

Personal and organizational performance is determined by commitment and both technical and general competencies, including leadership skills. Academia, however, mainly targets technical aspects in its curricular programs. On the other hand, the inter-disciplinary and multi-sector nature of Nutrition necessitates high levels of collaboration between stakeholders. Leadership development is therefore required in Nutrition. This paper describes the endeavor made in Iran and the Middle-East region, aiming at building leadership capacity among nutrition professionals. The empowered human resource is expected to facilitate nutrition security at the national and regional levels. Since 2007, the development process of the initiative has begun through research, bench marking, and consultation. The "learning organizations," "leadership from inside-out," and "transformational leadership" frameworks have been employed as underpinning theories. Main topics have been self-awareness, effective communication, shared visioning, trust building, creativity, and motivating. Outbound team-building activities and coaching have also been included. The first workshop of the Iranian Food and Nutrition Leadership Program was held in 2009 in Tehran. The experience expanded to the region as the Middle-East Nutrition Leadership Program (MENLP). The Ph.D. Nutrition programs (at four leading Universities) and Iranian Nutrition Society have been taken as other opportunity windows to develop leadership competencies. Biannual Iranian nutrition congresses have been used as the main media for advocacy purposes. High-satisfaction rates obtained following each training activity. In short, the initiative on "nutrition leadership development" has received growing investment and positive feedback in Iran. Continuous improvement of the initiative, establishment of active alumni networks, building MENLP regional platform, and integrating a monitoring and evaluation system are required to increase the investment returns.

1. VIEW WEST SOUTHWEST OF BUILDING 7 SHOWING MAIN ENTRANCE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW WEST SOUTHWEST OF BUILDING 7 SHOWING MAIN ENTRANCE TO OFFICES; MANAGEMENT AND FINANCE OFFICES WERE LOCATED HERE; BUILDING 23 IS AT RIGHT OF PHOTOGRAPH - Bryant Electric Company, 1421 State Street, Bridgeport, Fairfield County, CT

27. Historic American Buildings Survey E. W. Russell, Photographer, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Historic American Buildings Survey E. W. Russell, Photographer, May 7, 1936 EXTERIOR VIEW OF REAR DOOR TO MAIN HALLWAY, 1st FLOOR - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

Information Pre-Processing using Domain Meta-Ontology and Rule Learning System

NASA Astrophysics Data System (ADS)

Ranganathan, Girish R.; Biletskiy, Yevgen

Around the globe, extraordinary amounts of documents are being created by Enterprises and by users outside these Enterprises. The documents created in the Enterprises constitute the main focus of the present chapter. These documents are used to perform numerous amounts of machine processing. While using thesedocuments for machine processing, lack of semantics of the information in these documents may cause misinterpretation of the information, thereby inhibiting the productiveness of computer assisted analytical work. Hence, it would be profitable to the Enterprises if they use well defined domain ontologies which will serve as rich source(s) of semantics for the information in the documents. These domain ontologies can be created manually, semi-automatically or fully automatically. The focus of this chapter is to propose an intermediate solution which will enable relatively easy creation of these domain ontologies. The process of extracting and capturing domain ontologies from these voluminous documents requires extensive involvement of domain experts and application of methods of ontology learning that are substantially labor intensive; therefore, some intermediate solutions which would assist in capturing domain ontologies must be developed. This chapter proposes a solution in this direction which involves building a meta-ontology that will serve as an intermediate information source for the main domain ontology. This chapter proposes a solution in this direction which involves building a meta-ontology as a rapid approach in conceptualizing a domain of interest from huge amount of source documents. This meta-ontology can be populated by ontological concepts, attributes and relations from documents, and then refined in order to form better domain ontology either through automatic ontology learning methods or some other relevant ontology building approach.

KSC-2011-2737

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, this 3-D image shows space shuttle Discovery's main engines before removeal for cleaning and inspection. The work is part of the spacecraft's transition and retirement processing and is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. To view this image, use green and magenta 3-D glasses. Photo credit: NASA/Frankie Martin

KSC-2011-2676

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2675

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2667

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2671

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2669

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2674

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2672

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2666

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2670

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2601

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. NASA/Jim Grossmann

KSC-2011-2673

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2668

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 1 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. Photo credit: NASA/Jack Pfaller

KSC-2011-2602

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. - Technicians complete the removal of main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. NASA/Jim Grossmann

Interior. Apparatus on table by door used for metalplating wax ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior. Apparatus on table by door used for metal-plating wax discs in order to make a steel master for use in mass production of phonograph records. Process used primarily from 1915 to 1928. - Thomas A. Edison Laboratories, Building No. 2, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

"Peer Pressure" and the Group Process: Building Cultures of Concern

ERIC Educational Resources Information Center

Tate, Thomas F.; Copas, Randall L.

2010-01-01

Peer group treatment has been subject to two main lines of criticism. Some suggest any program which aggregates antisocial youth inevitably fosters negative peer influence. Others are concerned that certain peer programs are based on coercive peer confrontation. Positive Peer Culture [PPC] is an antidote to both of these varieties of toxic group…

POTENTIAL FOR INVASION OF UNDERGROUND SOURCES OF DRINKING WATER THROUGH MUD-PLUGGED WELLS: AN EXPERIMENTAL APPRAISAL

EPA Science Inventory

The main objective of the feasibility study described here was to test the hypothesis that properly plugged wells are effectively sealed by drilling mud. In The process of testing the hypothesis, evidence about dynamics of building mud cake on the wellbore-face was obtained, as ...

Students' Learning Processes during School-Based Learning and Workplace Learning in Vocational Education: A Review

ERIC Educational Resources Information Center

Schaap, Harmen; Baartman, Liesbeth; de Bruijn, Elly

2012-01-01

Learning in vocational schools and workplaces are the two main components of vocational education. Students have to develop professional competences by building meaningful relations between knowledge, skills and attitudes. There are, however, some major concerns about the combination of learning in these two learning environments, since vocational…

3. DETAIL VIEW OF THE MAIN ENTRY OF BUILDING 13, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. DETAIL VIEW OF THE MAIN ENTRY OF BUILDING 13, SHOWING THE ORIGINAL LIGHT FIXTURES AND THE EGYPTIAN MOTIF DECORATION; LOOKING SSW. (Ryan) - Veterans Administration Medical Center, Building No. 13, Old State Route 13 West, Marion, Williamson County, IL

1. THREE QUARTERS VIEW OF THE LIBRARY BUILDING. THE MAIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. THREE QUARTERS VIEW OF THE LIBRARY BUILDING. THE MAIN ENTRANCE IS ON THE LEFT, FACING FORTH STREET - Anaconda Historic District, Hearst Free Library, Fourth & Main Streets, Anaconda, Deer Lodge County, MT

2. VIEW SOUTHEAST, LEANTO GREENHOUSES OF MAIN HEADHOUSE (BUILDINGS 22. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW SOUTHEAST, LEAN-TO GREENHOUSES OF MAIN HEADHOUSE (BUILDINGS 22. 23) - U.S. Plant Introduction Station, Main Headhouse & Lean-to Greenhouses, 11601 Old Pond Road, Glenn Dale, Prince George's County, MD

Animation Strategies for Smooth Transformations Between Discrete Lods of 3d Building Models

NASA Astrophysics Data System (ADS)

Kada, Martin; Wichmann, Andreas; Filippovska, Yevgeniya; Hermes, Tobias

2016-06-01

The cartographic 3D visualization of urban areas has experienced tremendous progress over the last years. An increasing number of applications operate interactively in real-time and thus require advanced techniques to improve the quality and time response of dynamic scenes. The main focus of this article concentrates on the discussion of strategies for smooth transformation between two discrete levels of detail (LOD) of 3D building models that are represented as restricted triangle meshes. Because the operation order determines the geometrical and topological properties of the transformation process as well as its visual perception by a human viewer, three different strategies are proposed and subsequently analyzed. The simplest one orders transformation operations by the length of the edges to be collapsed, while the other two strategies introduce a general transformation direction in the form of a moving plane. This plane either pushes the nodes that need to be removed, e.g. during the transformation of a detailed LOD model to a coarser one, towards the main building body, or triggers the edge collapse operations used as transformation paths for the cartographic generalization.

Health monitoring system for a tall building with Fiber Bragg grating sensors

NASA Astrophysics Data System (ADS)

Li, D. S.; Li, H. N.; Ren, L.; Guo, D. S.; Song, G. B.

2009-03-01

Fiber Bragg grating (FBG) sensors demonstrate great potentials for structural health monitoring of civil structures to ensure their structural integrity, durability and reliability. The advantages of applying fiber optic sensors to a tall building include their immunity of electromagnetic interference and multiplexing ability to transfer optical signals over a long distance. In the work, FBG sensors, including strain and temperature sensors, are applied to the construction monitoring of an 18-floor tall building starting from its construction date. The main purposes of the project are: 1) monitoring the temperature evolution history within the concrete during the pouring process; 2) measuring the variations of the main column strains on the underground floor while upper 18 floors were subsequently added on; and 3) monitoring the relative displacements between two foundation blocks. The FBG sensors have been installed and interrogated continuously for more than five months. Monitoring results of temperature and strains during the period are presented in the paper. Furthermore, the lag behavior between the concrete temperature and its surrounding air temperature is investigated.

Lattice Boltzmann Study on Seawall-Break Flows under the Influence of Breach and Buildings

NASA Astrophysics Data System (ADS)

Mei, Qiu-Ying; Zhang, Wen-Huan; Wang, Yi-Hang; Chen, Wen-Wen

2017-10-01

In the process of storm surge, the seawater often overflows and even destroys the seawall. The buildings near the shore are usually inundated by the seawater through the breach. However, at present, there is little study focusing on the effects of buildings and breach on the seawall-break flows. In this paper, the lattice Boltzmann (LB) model with nine velocities in two dimensions (D2Q9) for the shallow water equations is adopted to simulate the seawall-break flows. The flow patterns and water depth distributions for the seawall-break flows under various densities, layouts and shapes of buildings and different breach discharges, sizes and locations are investigated. It is found that when buildings with a high enough density are perpendicular to the main flow direction, an obvious backwater phenomenon appears near buildings while this phenomenon does not occur when buildings with the same density are parallel to the main flow direction. Moreover, it is observed that the occurrence of backwater phenomenon is independent of the building shape. As to the effects of breach on the seawall-break flows, it is found that only when the breach discharge is large enough or the breach size is small enough, the effects of asymmetric distribution of buildings on the seawall-break flows become important. The breach location only changes the flow pattern in the upstream area of the first building that seawater meets, but has little impact on the global water depth distribution. Supported by the National Natural Science Foundation of China under Grant No. 11502124, the Natural Science Foundation of Zhejiang Province under Grant No. LQ16A020001, the Scientific Research Fund of Zhejiang Provincial Education Department under Grant No. Y201533808, the Natural Science Foundation of Ningbo under Grant No. 2016A610075, and is sponsored by K.C. Wong Magna Fund in Ningbo University.

Architectural Principles for Orchestration of Cross-Organizational Service Delivery: Case Studies from the Netherlands

NASA Astrophysics Data System (ADS)

van Veenstra, Anne Fleur; Janssen, Marijn

One of the main challenges for e-government is to create coherent services for citizens and businesses. Realizing Integrated Service Delivery (ISD) requires government agencies to collaborate across their organizational boundaries. The coordination of processes across multiple organizations to realize ISD is called orchestration. One way of achieving orchestration is to formalize processes using architecture. In this chapter we identify architectural principles for orchestration by looking at three case studies of cross-organizational service delivery chain formation in the Netherlands. In total, six generic principles were formulated and subsequently validated in two workshops with experts. These principles are: (i) build an intelligent front office, (ii) give processes a clear starting point and end, (iii) build a central workflow application keeping track of the process, (iv) differentiate between simple and complex processes, (v) ensure that the decision-making responsibility and the overview of the process are not performed by the same process role, and (vi) create a central point where risk profiles are maintained. Further research should focus on how organizations can adapt these principles to their own situation.

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING WOOD EAVE AND STUCCO RAKEBOARD ON GABLE END. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

Experimental Study of Pollutant Dispersion Within a Network of Streets

NASA Astrophysics Data System (ADS)

Garbero, Valeria; Salizzoni, Pietro; Soulhac, Lionel

2010-09-01

We investigate the dispersion of a passive scalar within an idealised urban district made up of a building-like obstacle array. We focus on a street network in which the lateral dimension of the buildings exceeds the street width, a geometry representative of many European cities. To investigate the effect of different geometries and wind directions upon the pollutant dispersion process, we have performed a series of wind-tunnel experiments. Concentration measurements of a passive tracer have enabled us to infer the main features characterising its dispersion within the street network. We describe this by focusing on the roles of different transfer processes. These are the channelling of the tracer along the street axes, the mixing at street intersections, and the mass exchange between the streets and the overlying atmospheric flow. Our experiments provide evidence of the dependence of these processes on the geometrical properties of the array and the direction of the overlying atmospheric flow.

Evaluation of Maximum Radionuclide Groundwater Concentrations for Basement Fill Model. Zion Station Restoration Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, T.

2016-05-20

ZionSolutions is in the process of decommissioning the Zion Nuclear Power Station (ZNPS). After decommissioning is completed, the site will contain two reactor Containment Buildings, the Fuel Handling Building and Transfer Canals, Auxiliary Building, Turbine Building, Crib House/Forebay, and a Waste Water Treatment Facility that have been demolished to a depth of 3 feet below grade. Additional below ground structures remaining will include the Main Steam Tunnels and large diameter intake and discharge pipes. These additional structures are not included in the modeling described in this report, but the inventory remaining (expected to be very low) will be included withmore » one of the structures that are modeled as designated in the Zion Station Restoration Project (ZSRP) License Termination Plan (LTP). The remaining underground structures will be backfilled with clean material. The final selection of fill material has not been made.« less

Sierra Nevada serpentinites. An important element in the architectonic heritage of Granada (Spain).

NASA Astrophysics Data System (ADS)

Navarro, Rafael; Pereira, Dolores; Rodríguez-Navarro, Carlos; Sebastián-Pardo, Eduardo

2013-04-01

Serpentinites are widely used in historic buildings in the whole world, from Ancient Greek or Egypt to more recent colonial buildings in the USA. Serpentinites from Sierra Nevada (S of Spain) have been traditionally used as ornamental elements in historic buildings of Granada city, both indoors and outdoors. The Cathedral, Carlos V Palace, Royal Chancery and some others are good examples of their use. Some other important cases can be found outside Granada, like El Escorial monastery, Las Salesas Reales convent, etc… all of them part of Madrid architectonic heritage. There are two quarries located in Sierra Nevada that supplied all the material to make the different elements in the cited buildings. In this work, a thorough characterization of the main serpentinites from Sierra Nevada, their uses, and their state of conservation in selected buildings from Granada has been performed. Samples from the main original quarry and from one historical building (Real Chancillería) have been analysed, determining the mineralogical and geochemical composition, texture, water parameters (absorption, porosity, density) and possible alteration by salt formation. It has been observed that the mineralogical and geochemical compositions are similar in both sets of samples, although the ones coming from the historical building show a highly advanced state of alteration. Regarding physical and mechanical parameters, samples from the quarry have very low water absorption values, while the porosity of serpentinites sampled from the Real Chancillería is comparatively much higher. We explain this difference as due to the weathering of the emplaced serpentinites by salt crystallization processes (mainly gypsum or epsomite), that generate strong internal pressures causing the disintegration of the whole natural stone. In addition, the increase of the porosity can be caused by dissolution processes related to the presence of acid solutions related to oxidation and hydrolysis of iron, chrome and nickel sulphides that were present in the original rock, and/or air pollution-derived SO2-attack. Knowing the condition of some of the serpentinite architectonic elements in Granada's historic buildings as well as the original quarry materials will help to face restoration in a more appropriate way than what has been done so far. Our work can be used as the base to establish future methods of remediation / conservation to prevent the deterioration of the serpentinite built heritage, but as well to recognize a natural stone that has been profusely used in the past in the construction of a magnificent heritage of an important city and historical quarries should be protected to provide original material if needed. This is a contribution of the Spanish network CONSTRUROCK.

Harnessing collaboration to build nursing research capacity: a research team journey.

PubMed

Priest, Helena; Segrott, Jeremy; Green, Barbara; Rout, Amelia

2007-08-01

This paper discusses a qualitative evaluation study, designed to explore nursing lecturers' research capability development through their engagement as co-researchers in a larger case study project (referred to as the 'main project'). It explores the justification for supporting research capacity development using this collaborative approach, the process and experience of undertaking collaborative research, and the effectiveness of this model of collaboration in developing new researchers. The paper also makes connections between the process of undertaking the research (designed to offer opportunities for inexperienced researchers to be involved) and the main project findings (which explored the ways in which academic schools develop research capacity). We first set the main project in its wider context and map key issues relating to research capacity development and collaboration in the literature, before outlining how we involved neophyte and 'midiphyte' researchers. The evaluative study, which is the focus of this paper, discusses the experiences of the neophyte researchers, and explores the synergies between the main project's key findings and the process of undertaking it. We conclude with some principles for using collaboration to build research capacity, visualised through a conceptual model. While this project was located within two universities in the UK, the development of research skills amongst nurses is likely to have broad international relevance. NB1 References to 'nursing', 'nursing research', and 'nursing education' are taken throughout to apply equally to midwifery, midwifery research, and midwifery education. NB2 For the purpose of this project, neophyte researchers are defined as staff needing formal training in research and involvement in others' research, and 'midiphyte' researchers as those with some training but needing support to develop research ideas.

23. Interior view of entrance corridor looking towards main stairway; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. Interior view of entrance corridor looking towards main stairway; showing unoccupied corner office space and encased bulletin boards; center of main section of building on main floor; view to northeast. - Ellsworth Air Force Base, Group Administration & Secure Storage Building, 2372 Westover Avenue, Blackhawk, Meade County, SD

8. BUILDING 332, INTERIOR, HALLWAY NEAR MAIN ENTRANCE IN NORTHWESTERN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. BUILDING 332, INTERIOR, HALLWAY NEAR MAIN ENTRANCE IN NORTHWESTERN PORTION OF BUILDING, LOOKING NORTH, WITH LOBBY TO LEFT AND CONFERENCE ROOM TO RIGHT. - Oakland Naval Supply Center, Dry Provisions Storehouses, Between Third & Fourth Streets, Between G & L Street, Oakland, Alameda County, CA

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING WOOD EAVE AND STUCCO RAKEBOARD ON GABLE END, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

A Model for Effective Performance in the Indonesian Navy.

DTIC Science & Technology

1987-06-01

Navy LMET I AWBRAC’ (COAGAU0 OAl reVerie of necoiuary and .dfmtk by block num"ber) 7,- This thesis describes a process of designing a management ...effective from ineffective manager . In the process of building the model two main steps are taken. First, a literature study of the empirical analysis of... management competencies was conducted to identify management competencies in the United States in general and the U.S. Navy in particular. Second, a

9. INTERIOR, BUILDING 320, MAIN GALLEY, FROM SOUTH WALL OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. INTERIOR, BUILDING 320, MAIN GALLEY, FROM SOUTH WALL OF ROOM, LOOKING NORTH, WITH KITCHEN HOOD OVERHEAD, AND DOOR TO REFRIGERATION ROOM ON OPPOSITE WALL. - Oakland Naval Supply Center, Administration Building-Cafeteria, East of Third Street between D & E Streets, Oakland, Alameda County, CA

Using group model building to understand factors that influence childhood obesity in an urban environment.

PubMed

Nelson, David A; Simenz, Christopher J; OʼConnor, Sarah P; Greer, Yvonne D; Bachrach, Ann L; Shields, Tony; Fuller, Brett A; Horrigan, Katie; Pritchard, Kathleen; Springer, Judy B; Meurer, John R

2015-01-01

Despite increased attention, conventional views of obesity are based upon individual behaviors, and children and parents living with obesity are assumed to be the primary problem solvers. Instead of focusing exclusively on individual reduction behaviors for childhood obesity, greater focus should be placed on better understanding existing community systems and their effects on obesity. The Milwaukee Childhood Obesity Prevention Project is a community-based coalition established to develop policy and environmental change strategies to impact childhood obesity in Milwaukee, Wisconsin. The coalition conducted a Group Model Building exercise to better understand root causes of childhood obesity in its community. Group Model Building is a process by which a group systematically engages in model construction to better understand the systems that are in place. It helps participants make their mental models explicit through a careful and consistent process to test assumptions. This process has 3 main components: (1) assembling a team of participants; (2) conducting a behavior-over-time graphs exercise; and (3) drawing the causal loop diagram exercise. The behavior-over-time graph portion produced 61 graphs in 10 categories. The causal loop diagram yielded 5 major themes and 7 subthemes. Factors that influence childhood obesity are varied, and it is important to recognize that no single solution exists. The perspectives from this exercise provided a means to create a process for dialogue and commitment by stakeholders and partnerships to build capacity for change within the community.

Radial transport processes as a precursor to particle deposition in drinking water distribution systems.

PubMed

van Thienen, P; Vreeburg, J H G; Blokker, E J M

2011-02-01

Various particle transport mechanisms play a role in the build-up of discoloration potential in drinking water distribution networks. In order to enhance our understanding of and ability to predict this build-up, it is essential to recognize and understand their role. Gravitational settling with drag has primarily been considered in this context. However, since flow in water distribution pipes is nearly always in the turbulent regime, turbulent processes should be considered also. In addition to these, single particle effects and forces may affect radial particle transport. In this work, we present an application of a previously published turbulent particle deposition theory to conditions relevant for drinking water distribution systems. We predict quantitatively under which conditions turbophoresis, including the virtual mass effect, the Saffman lift force, and the Magnus force may contribute significantly to sediment transport in radial direction and compare these results to experimental observations. The contribution of turbophoresis is mostly limited to large particles (>50 μm) in transport mains, and not expected to play a major role in distribution mains. The Saffman lift force may enhance this process to some degree. The Magnus force is not expected to play any significant role in drinking water distribution systems. © 2010 Elsevier Ltd. All rights reserved.

Aspects of remote maintenance in an FRG reprocessing plant from the manufacturer's viewpoint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeitzchel, G.; Tennie, M.; Saal, G.

In April 1986 a consortium led by Kraftwerk Union AG was commissioned by the German society for nuclear fuel reprocessing (DWK) to build the first West German commercial reprocessing plant for spent fuel assemblies. The main result of the planning efforts regarding remote maintenance operations inside the main process building was the introduction of FEMO technology (FEMO is an acronym based on German for remote handling modular technique). According to this technology the two cells in which the actual reprocessing (which is based on the PUREX technique) takes place are provided with frames to accommodate the process components (tanks, pumps,more » agitators, etc.), each frame together with the components which it supports forming one module. The two cells are inaccessible and windowless. For handling operations each cell is equipped with an overhead crane and a crane-like manipulator carrier system (MTS) with power manipulator. Viewing of the operations from outside the cells is made possible by television (TV) cameras installed at the crane, the MTS, and the manipulator. This paper addresses some examples of problems that still need to be solved in connection with FEMO handling. In particular, the need for close cooperation between the equipment operator, the component designer, the process engineer, the planning engineer, and the licensing authorities will be demonstrated.« less

Deconstructing Building Blocks: Preschoolers' Spatial Assembly Performance Relates to Early Mathematical Skills

ERIC Educational Resources Information Center

Verdine, Brian N.; Golinkoff, Roberta M.; Hirsh-Pasek, Kathryn; Newcombe, Nora S.; Filipowicz, Andrew T.; Chang, Alicia

2014-01-01

This study focuses on three main goals: First, 3-year-olds' spatial assembly skills are probed using interlocking block constructions (N = 102). A detailed scoring scheme provides insight into early spatial processing and offers information beyond a basic accuracy score. Second, the relation of spatial assembly to early mathematical skills…

Study of the Influence of Social Relationships among Students on Knowledge Building Using a Moderately Constructivist Learning Model

ERIC Educational Resources Information Center

Alonso, Fernando; Manrique, Daniel; Martínez, Loïc; Viñes, José M.

2015-01-01

The main objective of higher education institutions is to educate students to high standards to proficiently perform their role in society. Elsewhere we presented empirical evidence illustrating that the use of a blended learning approach to the learning process that applies a moderate constructivist e-learning instructional model improves…

Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Maine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendon, Vrushali V.; Zhao, Mingjie; Taylor, Zachary T.

2016-02-15

The 2015 IECC provides cost-effective savings for residential buildings in Maine. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Maine.

Combining techniques for screening and evaluating interaction terms on high-dimensional time-to-event data.

PubMed

Sariyar, Murat; Hoffmann, Isabell; Binder, Harald

2014-02-26

Molecular data, e.g. arising from microarray technology, is often used for predicting survival probabilities of patients. For multivariate risk prediction models on such high-dimensional data, there are established techniques that combine parameter estimation and variable selection. One big challenge is to incorporate interactions into such prediction models. In this feasibility study, we present building blocks for evaluating and incorporating interactions terms in high-dimensional time-to-event settings, especially for settings in which it is computationally too expensive to check all possible interactions. We use a boosting technique for estimation of effects and the following building blocks for pre-selecting interactions: (1) resampling, (2) random forests and (3) orthogonalization as a data pre-processing step. In a simulation study, the strategy that uses all building blocks is able to detect true main effects and interactions with high sensitivity in different kinds of scenarios. The main challenge are interactions composed of variables that do not represent main effects, but our findings are also promising in this regard. Results on real world data illustrate that effect sizes of interactions frequently may not be large enough to improve prediction performance, even though the interactions are potentially of biological relevance. Screening interactions through random forests is feasible and useful, when one is interested in finding relevant two-way interactions. The other building blocks also contribute considerably to an enhanced pre-selection of interactions. We determined the limits of interaction detection in terms of necessary effect sizes. Our study emphasizes the importance of making full use of existing methods in addition to establishing new ones.

Preliminary result on the enhancement of Ufer electrodes using recycle additives materials

NASA Astrophysics Data System (ADS)

Zulkifli, Muhammad Haziq Aniq Bin; Ahmad, Hussein Bin

2016-11-01

Ground building pillars is to be used as ground rod. The pillars are design, fabricated, and formulated with new ground fillers. The additives will be used from recycle waste materials mainly from the palm oil plant process. Micro scale building pillars will be fabricated and install in the test ground at all of the location. Earth tester meter are used to measure and collect the data of the soil resistivity when the research is conducted. In collecting these data, 3-terminal methods are used to carry the measurements. This experiment will be conducted for 30 weeks and regular measurements at the test ground copper grids will be conducted to measure the ground electrode resistance. The study will mainly base on IEC 62503-3. The used of reinforcing rods and mixture of recycle additives could produce a better grounding system that are suitable and can be used in all kind of soil condition and large industries.

Influence of Additives on Masonry and Protective Paints’ Quality

NASA Astrophysics Data System (ADS)

Kostiunina, I. L.; Vyboishchik, A. V.

2017-11-01

The environment is one of main factors influencing the living conditions of urban population in Russia nowadays. One of the main drawbacks restraining the aesthetic improvement process of modern Russian cities is unsatisfactory protection of buildings from atmospheric phenomena. Moreover, industrial waste in modern industrial cities of Russia prevents a long-lasting decoration of urban buildings. The article presents an overview of the composition and physical properties of masonry paints applied in the Chelyabinsk region. The traditional technology of coatings obtaining is studied, the drawbacks of this technology are examined, the new materials and applications are offered. The influence of additives on the basic properties of masonry paints, viz. weather resistance, viscosity, hardness, cost, is considered. The application of new technologies utilizing industrial waste can solve the abovestated problem, which also, along with improving basic physical and chemical properties, will result in the cost reduction and the increase of the masonry paints hardness.

15. View of the Main Office (Buildings 1, 2, and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. View of the Main Office (Buildings 1, 2, and 3), U.S. Plant Introduction Station, Glenn Dale, MD, ca. 1950. Facilities and Engineering Branch. Beltsville Agricultural Research Center, Building 426. - U.S. Plant Introduction Station, 11601 Old Pond Road, Glenn Dale, Prince George's County, MD

2. EXTERIOR NORTH CORNER OF BUILDING 106 FROM MAIN RESIDENTIAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. EXTERIOR NORTH CORNER OF BUILDING 106 FROM MAIN RESIDENTIAL STREET. CONCRETE WALKWAY FROM STREET TO FRONT SCREENED-IN PORCH IS VISIBLE AT PHOTO CENTER. BUILDING 115 IS AT PHOTO RIGHT BACKGROUND. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

10. OVERALL VIEW OF THE MAIN LOBBY OF BUILDING 1; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. OVERALL VIEW OF THE MAIN LOBBY OF BUILDING 1; SHOWING EGYPTIAN MOTIF DECORATIVE DETAIL OF THE ENGAGED COLUMNS, CORNICE & SOFFIT, DEDICATION PLAQUE, AND FLOOR MOSAICS; LOOKING SE. (Ryan & Harms) - Veterans Administration Medical Center, Building No. 1, Old State Route 13 West, Marion, Williamson County, IL

157. ARAIII Reactor building (ARA608) Main gas loop mechanical flow ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

157. ARA-III Reactor building (ARA-608) Main gas loop mechanical flow sheet. This drawing was selected as a typical example of mechanical arrangements within reactor building. Aerojet-general 880-area/GCRE-0608-50-013-102634. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

78 FR 14573 - Changes in Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... Municipal team.com/lomrs.htm. Mayor, City of Building, 503 Waynesboro, 503 West Main Street, West Main... flood insurance premium rates for new buildings and the contents of those buildings. For rating purposes... http://www.rampp- April 22, 2013......... 050192 06-0842P). Mattingly, Mayor, Street, Benton, team.com...

Metric Survey and Bim Technologies to Record Decay Conditions

NASA Astrophysics Data System (ADS)

Lo Turco, M.; Mattone, M.; Rinaudo, F.

2017-05-01

The paper proposes a method able to describe, classify and organize information assets concerned with Architectural Heritage, through the use of integrated survey procedures, mainly based on Terrestrial Laser Scanner (TLS). The point clouds are then imported into the Building Information Modeling (BIM) software to start with the modeling phase. With regard to this issue, in the last period Building Information Modeling is emerging as the most reliable method to manage architectural design and building processes. Literature supplies both theoretical approaches and several practical applications. However, very little researches are devoted to BIM applied to historical architecture, even if some initial results indicate the actual HBIM (Historic/Heritage BIM) as a possible instrument for the design of an intervention aimed at the conservation of the Cultural Heritage. The focus of the research is the creation of parametric objects representing the preservation status of materials and building components: 3D modeling of decays in the BIM platform ensures to enrich the related database with graphic, geometric and alphanumeric data that can be effectively used to design and manage future interventions. The added value consists in its capability to associate new parameters that describe both the state of conservation of the materials and the detailed description of interventions needed to restore the building. The analyzed case study belongs to Ferrovie dello Stato (the main Italian Railways company) and it is part of the maintenance area, which was originally constituted by a roundhouse containing 51 sheltered railroad tracks and two big sheds.

Application of BIM Technology in Prefabricated Buildings

NASA Astrophysics Data System (ADS)

Zhanglin, Guo; Si, Gao; Jun-e, Liu

2017-08-01

The development of fabricated buildings has become the main trend of the developm ent of modern construction industry in China. As the main tool of building information, BIM (b uilding information modeling) has greatly promoted the development of construction industry. Based on the review of the papers about the fabricated buildings and BIM technology in recent years, this paper analyzes the advantages of fabricated buildings and BIM technology, then exp lores the application of BIM technology in fabricated buildings. It aims to realize the rationaliz ation and scientification of project lifecycle management in fabricated construction project, and finally form a coherent information platform in the fabricated building.

An Ontology-Based Conceptual Model For Accumulating And Reusing Knowledge In A DMAIC Process

NASA Astrophysics Data System (ADS)

Nguyen, ThanhDat; Kifor, Claudiu Vasile

2015-09-01

DMAIC (Define, Measure, Analyze, Improve, and Control) is an important process used to enhance quality of processes basing on knowledge. However, it is difficult to access DMAIC knowledge. Conventional approaches meet a problem arising from structuring and reusing DMAIC knowledge. The main reason is that DMAIC knowledge is not represented and organized systematically. In this article, we overcome the problem basing on a conceptual model that is a combination of DMAIC process, knowledge management, and Ontology engineering. The main idea of our model is to utilizing Ontologies to represent knowledge generated by each of DMAIC phases. We build five different knowledge bases for storing all knowledge of DMAIC phases with the support of necessary tools and appropriate techniques in Information Technology area. Consequently, these knowledge bases provide knowledge available to experts, managers, and web users during or after DMAIC execution in order to share and reuse existing knowledge.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aldrich, Robb; Butterfield, Karla

With funding from the Building America Program, part of the U.S. Department of Energy Building Technologies Office, the Consortium for Advanced Residential Buildings (CARB) worked with BrightBuilt Home (BBH) to evaluate and optimize building systems. CARB’s work focused on a home built by Black Bros. Builders in Lincolnville, Maine (International Energy Conservation Code Climate Zone 6). As with most BBH projects to date, modular boxes were built by Keiser Homes in Oxford, Maine.

6. Interior view of main entrance vestibule looking towards lobby; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Interior view of main entrance vestibule looking towards lobby; showing wall mounted information stations and drinking fountain; near southeast corner of building on main floor; view to north. - Ellsworth Air Force Base, Mess & Administration Building, 1561 Ellsworth Street, Blackhawk, Meade County, SD

Redefining the business process of Department of Food Security and Agriculture in Government of Surabaya City

NASA Astrophysics Data System (ADS)

Cahyono, H.; Wessiani, N. A.

2018-04-01

Government of Indonesia has been launched the bureaucratic reform program since 2010. One of the action is conducted restructuring organization in all city governments. Department of Food Security and Agriculture in Government of Surabaya City is the result of merger from two Department, namely Bureau of Food Security and Department of Agriculture. This merger makes Department of Food Security and Agriculture to redefine their business process. The new business process is needed to be defined in order to align the new structure with the long term strategic planning of Surabaya City Government. This research aims to redefine the business process of Department of Food Security and Agriculture in Government of Surabaya City. The CIMOSA model is adopted for identifying the activities in the business process. The new business process is important for the department to allocate their resource, mainly the human resource and as the main input for the department to build their standard operating procedure.

1. July 1988 EAST (MAIN) ELEVATION, PROTECTION ASSISTANT'S RESIDENCE (BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. July 1988 EAST (MAIN) ELEVATION, PROTECTION ASSISTANT'S RESIDENCE (BUILDING 1092) - Glacier Ranger Station, Protection Assistant's Residence, Washington State Route 542, Glacier, Whatcom County, WA

KSC-2011-2736

NASA Image and Video Library

2011-03-31

CAPE CANAVERAL, Fla. -- This is a 3-D image of crews in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida using a Hyster forklift to lower one of space shuttle Discovery's main engines after removal for cleaning and inspection. This is part of the spacecraft's transition and retirement processing and work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display. To view this image, use green and magenta 3-D glasses. Photo credit: NASA/Frankie Martin

The Italian politics of alcohol: The creation of a public arena at the end of the 20th century.

PubMed

Beccaria, Franca; Rolando, Sara

2015-07-01

Political concern with alcohol as a social problem arose in Italy only at the end of last century, when consumption and the death rate from alcohol-related causes had both been trending down for decades. The main aim of this case study is to investigate - applying Wiener's theoretical framework - the role of different stakeholders in the process that led to the approval of the first alcohol framework law in 2001. Fourteen individual interviews with stakeholders were conducted, covering all the main topics involved in Italian alcohol policies. In addition, 19 bills introduced in the Italian parliament were analysed to reconstruct the legislative process. Stakeholders' role was analysed, assessing their positions, contrasts and coalitions. The rhetoric employed in the course of public debate was also deciphered. All three of the main processes used by Wiener to describe the building of a public arena around alcohol - animating the problem, legitimizing it and demonstrating it - were found. The Club of Alcoholics in Treatment and professionals working with alcoholics in Local Addiction Services appeared to be the most active groups in supporting the law. They did so by establishing a strong alliance, even if their visions about the problem and how to solve it differed. The study showed that a shared vision is not as essential as 'combining for strength' in order to create a public arena around a social problem. Furthermore, not even scientific data are essential for demonstrating a problem, as the use of rhetoric seems to be more effective in building ideologies. Copyright © 2014 Elsevier B.V. All rights reserved.

Building Bridge between Learning and Positive Emotion: How to Apply Emotional Factor in Instructional Designing Process?

ERIC Educational Resources Information Center

Park, Sanghoon

2004-01-01

For millennia, emotional states have been viewed as avoidable impediments to rational thinking (Ellis & Newton, 2000). Several reasons have been pointed out. The lack of consensus of the definition on emotion that tend to conflict with each other was suggested as a main reason (Price, 1998). Also the difficulty of research methodology such as…

Quality of Blended Learning within the Scope of the Bologna Process

ERIC Educational Resources Information Center

Monteiro, Angelica; Leite, Carlinda; Lima, Lurdes

2013-01-01

This article builds on existing data about the blended learning approach in higher education. It presents the theoretical framework and data of an empirical study conducted at the University of Porto in Portugal involving teachers who won the E-Learning Prize of Excellence in the period between 2006 and 2010. The main objective of this article is…

Building the dream team: don't make it a nightmare.

PubMed

Nelson, M; Nelson, S

1997-11-01

This article covers the often overlooked area of team management concepts through a discussion of what many companies have done to implement these new concepts successfully. It describes the basics of how to and also explains why people resist the process of implementation. The main topics are (1) team formation, (2) pitfalls to avoid, and (3) team measurement.

The Relation between Cognitive and Metacognitive Processing: Building Bridges between the SRL, MDL, and SAL Domains

ERIC Educational Resources Information Center

Coertjens, Liesje

2018-01-01

Aim: The main aim of this commentary was to connect the insights from the contributions of the special issue on the intersection between depth and the regulation of strategy use. The seven contributions in this special issue stem from three perspectives: self-regulated learning (SRL), model of domain learning (MDL), or the student approaches to…

The Impact of Organisational Structure and Practices on Learning in the Workplace

ERIC Educational Resources Information Center

Ashton, David N.

2004-01-01

The main thrust of the research effort into workplace learning has been to identify the characteristics of workplace learning as experienced by the learner. The impact of the wider organisational process in which that learning is embedded have been played down. This paper, building on the work of Koike and Darrah, uses research conducted in a…

Understanding of Protein Synthesis in a Living Cell

ERIC Educational Resources Information Center

Mustapha, Y.; Muhammad, S.

2006-01-01

The assembly of proteins takes place in the cytoplasm of a cell. There are three main steps. In initiation, far left, all the necessary parts of the process are brought together by a small molecule called a ribosome. During elongation, amino acids, the building blocks of proteins, are joined to one another in a long chain. The sequence in which…

Regional approaches in high-rise construction

NASA Astrophysics Data System (ADS)

Iconopisceva, O. G.; Proskurin, G. A.

2018-03-01

The evolutionary process of high-rise construction is in the article focus. The aim of the study was to create a retrospective matrix reflecting the tasks of the study such as: structuring the most iconic high-rise objects within historic boundaries. The study is based on contemporary experience of high-rise construction in different countries. The main directions and regional specifics in the field of high-rise construction as well as factors influencing the further evolution process are analyzed. The main changes in architectural stylistics, form-building, constructive solutions that focus on the principles of energy efficiency and bio positivity of "sustainable buildings", as well as the search for a new typology are noted. The most universal constructive methods and solutions that turned out to be particularly popular are generalized. The new typology of high-rises and individual approach to urban context are noted. The results of the study as a graphical scheme made it possible to represent the whole high-rise evolution. The new spatial forms of high-rises lead them to new role within the urban environments. Futuristic hyperscalable concepts take the autonomous urban space functions itself and demonstrate us how high-rises can replace multifunctional urban fabric, developing it inside their shells.

Radar Interferometry for Monitoring the Vibration Characteristics of Buildings and Civil Structures: Recent Case Studies in Spain.

PubMed

Luzi, Guido; Crosetto, Michele; Fernández, Enric

2017-03-24

The potential of a coherent microwave sensor to monitor the vibration characteristics of civil structures has been investigated in the past decade, and successful case studies have been published by different research teams. This remote sensing technique is based on the interferometric processing of real aperture radar acquisitions. Its capability to estimate, simultaneously and remotely, the displacement of different parts of the investigated structures, with high accuracy and repeatability, is its main advantage with respect to conventional sensors. A considerable amount of literature on this technique is available, including various case studies aimed at testing the ambient vibration of bridges, buildings, and towers. In the last years, this technique has been used in Spain for civil structures monitoring. In this paper, three examples of such case studies are described: the monitoring of the suspended bridge crossing the Ebro River at Amposta, the communications tower of Collserola in Barcelona, and an urban building located in Vilafranca del Penedès, a small town close to Barcelona. This paper summarizes the main outcomes of these case studies, underlining the advantages and limitations of the sensors currently available, and concluding with the possible improvements expected from the next generation of sensors.

Photocopy of photograph (original print located at Engineering Management Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of photograph (original print located at Engineering Management Building, Naval Shipyard, Long Beach). Navy Photograph, July 4, 1942, Photograph #2229. MAIN GATE 1, FROM OUTSIDE (NORTH) OF ENTRANCE, FACING SOUTHWEST (WITH BUILDING 40 IN BACKGROUND) - Roosevelt Base, Main Gate No. 1, Ocean Boulevard where Nevada & Maryland Street meet, Long Beach, Los Angeles County, CA

7. SHOSHONE HYDROELECTRIC PLANT, WEST ELEVATION OF MAIN BUILDING TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. SHOSHONE HYDROELECTRIC PLANT, WEST ELEVATION OF MAIN BUILDING TO THE LEFT, NORTH ELEVATION OF OFFICE BUILDING TO THE RIGHT, VIEW TO THE EAST. CONCRETE 'PATH' IN FOREGROUND IS THE CONDUIT THROUGH WHICH POWER CABLES RUN FROM THE TRANSFORMERS TO THE 115 KV SUBSTATION. - Shoshone Hydroelectric Plant Complex, 60111 U.S. Highway 6, Garfield County, CO

Rehabilitation of adobe buildings. Understanding different materials from Portugal

NASA Astrophysics Data System (ADS)

Costa, Cristiana; Rocha, Fernando; Velosa, Ana

2016-04-01

Earth construction is the oldest building material known, with documented cases of the use of earth bricks since Mesopotamia around 10 000 BC (Heathcote, 1995). The earth construction exists throughout the majority of the world in different cultures, and for some countries, nowadays it continues to be the main process of construction (Vega et al, 2011). Around 30% of the world's population lives in buildings made of earth materials. Earthen construction is an environmentally friendly technique with a social and cultural contribution; this advantage is increased when this type of construction is applied in developing countries where the material costs counterbalance with labour costs, and where other materials and techniques cannot be available (Ciancio et al, 2013). Studies of materials characterization are required in order to understand the composition and specific properties of the earth buildings, their heterogeneity and their degradation mechanisms. Some adobes from different buildings, ages and regions of Portugal were collected in order to characterize them (mineralogically, chemically and physically). It was possible to understand the composition of these materials and their differences. Main minerals are quartz, feldspars, calcite and phyllosilicates (mica and kaolinite). The mechanical behaviour of these materials isn't the best, but it is possible to improve it with some simple and cheap natural additives (kaolinitic soils). The characterization of these materials allows us to understand the differences between the materials from the different regions (controlled by locally available raw materials). Understanding these materials, and their properties, it is possible to formulate new ones for repair, conservation and rehabilitation works. The adobe bricks are an alternative of kiln baked bricks which has several advantages and one of the most important is that these materials are recyclable. Adobes are an excellent option for building rehabilitation, if composition is optimised.

3D Reconstruction of Irregular Buildings and Buddha Statues

NASA Astrophysics Data System (ADS)

Zhang, K.; Li, M.-j.

2014-04-01

Three-dimensional laser scanning could acquire object's surface data quickly and accurately. However, the post-processing of point cloud is not perfect and could be improved. Based on the study of 3D laser scanning technology, this paper describes the details of solutions to modelling irregular ancient buildings and Buddha statues in Jinshan Temple, which aiming at data acquisition, modelling and texture mapping, etc. In order to modelling irregular ancient buildings effectively, the structure of each building is extracted manually by point cloud and the textures are mapped by the software of 3ds Max. The methods clearly combine 3D laser scanning technology with traditional modelling methods, and greatly improves the efficiency and accuracy of the ancient buildings restored. On the other hand, the main idea of modelling statues is regarded as modelling objects in reverse engineering. The digital model of statues obtained is not just vivid, but also accurate in the field of surveying and mapping. On this basis, a 3D scene of Jinshan Temple is reconstructed, which proves the validity of the solutions.

[Challenges for the construction of 'Health and Environment "in view of its Thematic Group in the Brazilian Association of Collective Health].

PubMed

Augusto, Lia Giraldo da Silva; Tambellini, Anamaria Testa; de Miranda, Ary Carvalho; Carneiro, Fernando Ferreira; Castro, Hermano; Porto, Marcelo Firpo de Souza; Rigotto, Raquel Maria; Schütz, Gabriel Eduardo

2014-10-01

'Health and Environment' is the nucleus of knowledge and practices surrounding the relations between society and nature, mediated by the mode of production and human labor, which help to understand the determination of the health-disease process of different social classes and groups. This paper discusses the challenges to build this field from the perspective of its Thematic Group of the Association of Collective Health. The three core themes of the 2nd Brazilian Symposium on Environmental Health are taken as the theoretical framework for analysis. A timeline of the group's trajectory, in its historical context, helps to identify the contemporary challenges. Among the main challenges identified, the challenge of building an interdisciplinary, intersectoral and participatory scientific practice, which could build knowledge and dialogue with social movements, is highlighted.

11. SAC command center, main operations area, underground structure, building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. SAC command center, main operations area, underground structure, building 501, undated - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

9. SAC command center, main operations area, underground structure, building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. SAC command center, main operations area, underground structure, building 501, undated - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

DETAIL OF MAIN ENTRANCE ON EAST (FRONT) ELEVATION OF BUILDING. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF MAIN ENTRANCE ON EAST (FRONT) ELEVATION OF BUILDING. VIEW TO SOUTHWEST. - Plattsburgh Air Force Base, Education Center, Off Connecticut Road, east of Idaho Avenue, Plattsburgh, Clinton County, NY

6. INTERIOR MAIN SPACE DETAIL VIEW, FACING EAST. BUILDING NO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR MAIN SPACE DETAIL VIEW, FACING EAST. BUILDING NO 42 GARAGE & TRANSPORTATION MAINTENANCE FACILITY - NASA Industrial Plant, Garage & Transportation Maintenance Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

5. INTERIOR MAIN SPACE DETAIL VIEW, FACING WEST. BUILDING NO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INTERIOR MAIN SPACE DETAIL VIEW, FACING WEST. BUILDING NO 42 GARAGE & TRANSPORTATION MAINTENANCE FACILITY - NASA Industrial Plant, Garage & Transportation Maintenance Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

133. Photocopy of photograph, 1915 (Chrysler) MAIN BUILDING #1, SECOND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

133. Photocopy of photograph, 1915 (Chrysler) MAIN BUILDING #1, SECOND FLOOR CHASSIS ASSEMBLY LINE, VIEW SOUTH, 1980 - Dodge Brothers Motor Car Company Plant, Between Joseph Campau & Conant Avenues, Hamtramck, MI

Indoor Radon Concentration Related to Different Radon Areas and Indoor Radon Prediction

NASA Astrophysics Data System (ADS)

Juhásová Šenitková, Ingrid; Šál, Jiří

2017-12-01

Indoor radon has been observed in the buildings at areas with different radon risk potential. Preventive measures are based on control of main potential radon sources (soil gas, building material and supplied water) to avoid building of new houses above recommended indoor radon level 200 Bq/m3. Radon risk (index) estimation of individual building site bedrock in case of new house siting and building protection according technical building code are obligatory. Remedial actions in buildings built at high radon risk areas were carried out principally by unforced ventilation and anti-radon insulation. Significant differences were found in the level of radon concentration between rooms where radon reduction techniques were designed and those where it was not designed. The mathematical model based on radon exhalation from soil has been developed to describe the physical processes determining indoor radon concentration. The model is focused on combined radon diffusion through the slab and advection through the gap from sub-slab soil. In this model, radon emanated from building materials is considered not having a significant contribution to indoor radon concentration. Dimensional analysis and Gauss-Newton nonlinear least squares parametric regression were used to simplify the problem, identify essential input variables and find parameter values. The presented verification case study is introduced for real buildings with respect to various underground construction types. Presented paper gives picture of possible mathematical approach to indoor radon concentration prediction.

32. Photocopy of photograph, ca. 1930 (original print on file ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

32. Photocopy of photograph, ca. 1930 (original print on file at U.S. Army Intelligence Security Command, Fort Belvoir, Virginia). INTERIOR VIEW TO WEST OF FIRST FLOOR ROOM TO NORTHWEST OF MAIN ENTRY IN MAIN BUILDING OF ARLINGTON HALL JUNIOR COLLEGE. - Arlington Hall Station, Main Building, 4000 Arlington Boulevard, Arlington, Arlington County, VA

10. SAC command center, main operations area, underground structure, building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. SAC command center, main operations area, underground structure, building 501, circa 1980 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

12. SAC command center, main operations area, underground structure, building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. SAC command center, main operations area, underground structure, building 501, circa 1960 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE

Emotional resistance building: how family members of loved ones undergoing chemotherapy treatment process their fear of emotional collapse.

PubMed

McCarthy, Bridie; Andrews, Tom; Hegarty, Josephine

2015-04-01

To explore family members' experiences when their loved one is undergoing chemotherapy treatment as an outpatient for newly diagnosed colorectal cancer and to develop an explanatory theory of how they process their main concern. Most individuals with cancer are now treated as outpatients and cared for by family members. International research highlights the many side effects of chemotherapy, which in the absence of specific information and/or experience can be difficult for family members to deal with. Unmet needs can have an impact on the health of both patients and family members. Classic grounded theory methodology was used for this study. Using classic grounded theory methodology, family members (n = 35) of patients undergoing chemotherapy treatment for cancer were interviewed (June 2010-July 2011). Data were analysed using the concurrent processes of constant comparative analysis, data collection, theoretical sampling and memo writing. The main concern that emerged for participants was fear of emotional collapse. This fear was dealt with through a process conceptualized as 'Emotional Resistance Building'. This is a basic social process with three phases: 'Figuring out', 'Getting on with it' and 'Uncertainty adjustment'. The phases are not linear, but interrelated as participants can be in any one or more of the phases at any one time. This theory has the potential to be used by healthcare professionals working in oncology to support family members of patients undergoing chemotherapy. New ways of supporting family members through this most difficult and challenging period are articulated within this theory. © 2014 John Wiley & Sons Ltd.

General view of buildings: Building No. 6 with smokestack (left ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of buildings: Building No. 6 with smokestack (left foreground); Building No. 5 (left background); Base of Water Tower (right foreground); Buildings 4, 3, 2, 1 (center foreground to background) - Thomas A. Edison Laboratories, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

The ASTRONET Infrastructure Roadmap: A Twenty Year Strategy for European Astronomy

NASA Astrophysics Data System (ADS)

Bode, M.; Monnet, G.

2008-12-01

The process followed by ASTRONET to build a long-term strategy for European astronomy is presented. The main conclusions and priorities given in the recently unveiled report on the Infrastructure Roadmap for the next 20 years, following the establishment of a Science Vision last year, are summarised. These reports together hopefully represent a blueprint for a bright future for European astronomy.

A Teaching Assistant's Guide to Child Development and Psychology in the Classroom. Second Edition

ERIC Educational Resources Information Center

Bentham, Susan

2011-01-01

"How can you help students most effectively in the classroom?" As a Teaching Assistant, you play a vital role in today's schools. This fully updated new edition will help you get to grips with the main issues to do with psychology and its role in the processes of teaching and learning. This accessible text, building on the success of a…

43. Main entry to SAC Control offices, second floor, Awing, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

43. Main entry to SAC Control offices, second floor, A-wing, building 500, looking southeast - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

Thermal energy storage with phase change materials (PCMs) for the improvement of the energy performance of buildings

NASA Astrophysics Data System (ADS)

Soares, Nelson

The improvement of the energy efficiency of buildings during their operational phase is an active area of research. The markets are looking for new technologies, namely new thermal energy storage (TES) systems, which can be used to reduce buildings' dependency on fossil fuels, to make use of renewable energy sources and to contribute to match energy supply and demand efficiently. The main goals of this thesis are: (i) to evaluate the heat transfer with solid-liquid phase-change through small TES units filled with phase-change materials (PCMs), providing experimental data to be used in the design of new TES systems for buildings and in the validation of numerical models, and (ii) to provide some guidelines for the incorporation of PCM-drywalls in buildings aiming to reduce the energy demand for heating and cooling by making use of the latent heat from the phase-change processes of PCMs. The first part of this thesis refers to the experimental study of the heat transfer through a vertical stack of metallic rectangular cavities filled with different PCMs (a microencapsulated and a free-form PCM). The research carried out aims: (i) to analyze the melting and solidification processes of the PCM within the enclosures, (ii) to evaluate the influence of the aspect ratio of the cavities on the heat transfer and (iii) to discuss which type of PCM is better for specific cases. As a result, a big amount of experimental data for benchmarking and validation of numerical models is made available to the scientific community. Moreover, the results allow discussing which arrangement of the TES unit is better for specific applications considering the thermal regulation effect during charging, the influence of subcooling during discharging, and the influence of natural convection during both processes. It is shown that the effect of natural convection in the free-form PCM must be considered in any simulation to better describe the charging process. During discharging, subcooling must also be considered. On the contrary, the effect of natural convection and subcooling can be neglected when considering the microencapsulated PCM. The second part of this thesis concentrates on the dynamic simulation of energy in buildings considering the latent heat from PCMs' phase-change processes. The energy system under investigation is extended to an air-conditioned residential single-zone room. The main goals are: (i) to develop a holistic methodology to optimize the incorporation of PCM-drywalls in different typologies of construction and (ii) to provide guidelines for the incorporation of PCM-drywalls in different climates. Two studies are carried out: (i) a multi-dimensional optimization study combining EnergyPlus and GenOpt tools to optimize the incorporation of PCM-drywalls in lightweight steel-framed (LSF) residential buildings in Europe, and (ii) an EnergyPlus-based parametric study to optimize the incorporation of PCM-drywalls in heavyweight residential buildings in Kuwait. It is shown that an optimum PCM-drywall solution can be found for each European climate and that the incorporation of PCM-drywalls can contribute for heating and cooling energy savings in LSF construction. The results show that PCM-drywalls are particularly interesting for LSF construction in Mediterranean climates leading to higher energy savings. PCM-drywalls can also be used to reduce the annual energy demand for cooling in Kuwait by almost 5%.

Principles and methods for ensuring safe operation of high-rise buildings

NASA Astrophysics Data System (ADS)

Korol, Oleg; Kustikova, Yuliya

2018-03-01

The purpose of monitoring the technical condition of high-rise buildings is to prevent possible negative situations leading to significant socio-economic losses by timely warning of the emergence of such situations. To achieve this goal, it is necessary to solve the following main tasks, such as: identifying the time and place of origin and development of negative processes that lead to the emergence of an emergency situation; analysis of the possible development of the situation in time; development of management decisions; formation and submission of warning signals; obtaining new knowledge about the operation of the object, the factors of influence on this object, the speed of development of destructive processes. When solving the above problems, an important role is played by constructing an adequate mathematical model of the object, the parameters of which should be calibrated according to the current monitoring results.

Acoustic barriers obtained from industrial wastes.

PubMed

Garcia-Valles, M; Avila, G; Martinez, S; Terradas, R; Nogués, J M

2008-07-01

Acoustic pollution is an environmental problem that is becoming increasingly more important in our society. Likewise, the accumulation of generated waste and the need for waste management are also becoming more and more pressing. In this study we describe a new material--called PROUSO--obtained from industrial wastes. PROUSO has a variety of commercial and engineering, as well as building, applications. The main raw materials used for this environmentally friendly material come from slag from the aluminium recycling process, dust from the marble industry, foundry sands, and recycled expanded polystyrene from recycled packaging. Some natural materials, such as plastic clays, are also used. To obtain PROUSO we used a conventional ceramic process, forming new mineral phases and incorporating polluted elements into the structure. Its physical properties make PROUSO an excellent acoustic and thermal insulation material. It absorbs 95% of the sound in the frequency band of the 500 Hz. Its compressive strength makes it ideal for use in ceramic wall building.

Snow as building material for construction of technological along-the-route roads of main pipelines

NASA Astrophysics Data System (ADS)

Merdanov, S. M.; Egorov, A. L.; Kostyrchenko, V. A.; Madyarov, T. M.

2018-05-01

The article deals with the process of compacting snow in a closed volume with the use of vacuum processing for the construction of technological along-the-route roads of main pipelines. The relevance of the chosen study is substantiated; methods and designs for snow compaction are considered. The publication activity and defenses of doctoral and candidate dissertations on the research subject are analyzed. Patent analysis of existing methods and equipment for snow compaction with indication of their disadvantages is carried out. A design calculation was carried out using computer programs in which a strength calculation was performed to identify the most stressed places in the construction of a vibrating hydraulic tyre-type roller. A 3D model of the experimental setup was developed.

Environmental analysis of waste foundry sand via life cycle assessment.

PubMed

Mitterpach, Jozef; Hroncová, Emília; Ladomerský, Juraj; Balco, Karol

2017-01-01

The aim of this manuscript is to provide an environmental assessment of the creation and use of waste foundry sand (WFS) via an LCA in a foundry for grey cast iron. A life cycle impact assessment was carried out using SimaPro 8. This environmental analysis assessed the impact of creating waste foundry sand (WFS) in a foundry, Hronec (Slovakia, Central Europe). According to BREF, this foundry is classified as an iron foundry with a production capacity greater than 20 t/day with processes typical for grey cast iron foundries. Molten metal is poured into single-use sand moulds. We identified those factors influencing the creation and use of WFS which significantly affect the quality of the environment. The use of WFS from the production of cores in regenerated moulding mixtures with installed circuits brings marked minimisation of material and energy inputs in the processes of creating WFS and it positively influences the consumption of resources and the quality of the ecosystem. Space for lessening the impact of WFS processes upon the consumption of resources and ecosystem quality is mainly found in recycling WFS in the building sector. In the next step, it is necessary to thoroughly verify the eco-toxicological properties of not only the created WFS and other foundry waste, but mainly the building products for which this waste is used. In terms of transportation, it is important that waste is recycled at local level. The processes of creating WFS have a marked influence upon all the selected waste categories (consumption of resources, ecosystem quality, human health). By minimising material inputs into processes and the effective adjustment of production technology, a foundry can significantly lessen the impacts of processes for creating WFS upon the environment.

Research on the Application of GRC Material in Exhibition Decoration Engineering

NASA Astrophysics Data System (ADS)

Cai, Yan

2018-03-01

Glass fiber reinforced cement (GRC) is a kind of new building material which is based on cement and take the alkali resistant glass fiber as reinforcing material. It is mainly used in building decoration project and it has many advantages like environmental protection, economical, practical modeling and others. This paper mainly studies the concrete application of GRC material in exhibition building decoration project.

The History of the Austin College Building and Old Main at Sam Houston State University

ERIC Educational Resources Information Center

Singer, Erin; Shields, Samantha

2017-01-01

Austin Hall and Old Main serve as the heart of what is now Sam Houston State University. The buildings' rich histories help one to understand how Sam Houston State University and its proud teacher education heritage came to be. To begin with Austin Hall's story, the University's original building has a unique and interesting tale that journeys…

The importance of the criteria of residential buildings from the perspective of future users

NASA Astrophysics Data System (ADS)

Sirochmanová, Lenka; Kozlovská, Mária; Bašková, Renáta

2016-06-01

The developers need to know what is important to their customers in preparation of new construction of residential buildings. The paper deals with finding the importance of structure, material, cost, time and environmental criteria of residential buildings from the perspective of the future owners. The research methodology that provided the information was questionnaire survey. Research was conducted in two lines. The first line is dedicated to the research of main construction domains of residential building. The second line of the research deals with the specific criteria of main construction domains. The order of importance of the main areas and the specific criteria is determined by analyzing of data through descriptive characteristics: median, modus, variance, average value and by weigh of importance.

A case study of the use of GPR for rehabilitation of a classified Art Deco building: The InovaDomus house

NASA Astrophysics Data System (ADS)

Barraca, Nuno; Almeida, Miguel; Varum, Humberto; Almeida, Fernando; Matias, Manuel Senos

2016-04-01

Ancient buildings in historical town centers can be protected by Cultural Heritage legislation, thus implying that any rehabilitation must respect their main architectural features. These concerns also apply to Modern and Contemporary buildings, in particular if they are important examples of architectural styles from those periods. These extra problems, or motivations, add to the inherent structural delicacy of ancient building restoration that requires detailed knowledge of the building foundations, characteristics and materials, modification history, infrastructure mapping, current pathologies, etc., all relevant information for an informed rehabilitation project. Such knowledge is seldom available before the actual rehabilitation works begin, and the usual invasive preliminary surveys are frequently expensive, time-consuming and likely significantly alter/damage the building's main features or structural integrity. Hence, the current demand for indirect, non-invasive, reliable and high resolution imagery techniques able to produce relevant information at the early stages of a rehabilitation project. The present work demonstrates that Ground Penetrating Radar (GPR or Georadar) surveys can provide a priori knowledge on the structure, construction techniques, materials, history and pathologies in a classified Modern Age building. It is also shown that the use of GPR on these projects requires carefully designed surveys, taking into account the known information, spatial constraints, environmental noise, nature and dimensions of the expected targets and suitable data processing sequences. Thus, if properly applied, GPR produces high-resolution results crucial for sound engineering/architectural interventions aiming to restore and renovate Modern and Contemporary buildings, with (1) focus on the overall quality of the end-result, (2) no damage inflicted to the existing structure, (3) respect of the building's historical coherence and architectural elements and characteristics, that is, its Cultural Heritage value. Most of the findings and applications discussed in this work can be seen as an approximation to model studies, so that, relevant information can be drawn from the different investigated situations. Therefore, owing to the nature and the range of the problems encountered in this case study, it is also expected that the presented GPR data and interpretation will provide important clues and guidance in the planning and investigation of similar projects and problems.

ENTRANCE ROAD FROM MAIN ENTRANCE GATE, WITH ADMINISTRATION BUILDING AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ENTRANCE ROAD FROM MAIN ENTRANCE GATE, WITH ADMINISTRATION BUILDING AT LEFT, LOWER BARN AT CENTER AND UPPER BARN AT RIGHT BACKGROUND. VIEW TO SOUTH. - Marion National Cemetery, 1700 East Thirty-eighth Street, Marion, Grant County, IN

Northwest view of steel plate "cans" in bay 7 of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Northwest view of steel plate "cans" in bay 7 of the main pipe mill building. Historian for scale. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

Predicting the long-term durability of hemp-lime renders in inland and coastal areas using Mediterranean, Tropical and Semi-arid climatic simulations.

PubMed

Arizzi, Anna; Viles, Heather; Martín-Sanchez, Inés; Cultrone, Giuseppe

2016-01-15

Hemp-based composites are eco-friendly building materials as they improve energy efficiency in buildings and entail low waste production and pollutant emissions during their manufacturing process. Nevertheless, the organic nature of hemp enhances the bio-receptivity of the material, with likely negative consequences for its long-term performance in the building. The main purpose of this study was to study the response at macro- and micro-scale of hemp-lime renders subjected to weathering simulations in an environmental cabinet (one year was condensed in twelve days), so as to predict their long-term durability in coastal and inland areas with Mediterranean, Tropical and Semi-arid climates, also in relation with the lime type used. The simulated climatic conditions caused almost unnoticeable mass, volume and colour changes in hemp-lime renders. No efflorescence or physical breakdown was detected in samples subjected to NaCl, because the salt mainly precipitates on the surface of samples and is washed away by the rain. Although there was no visible microbial colonisation, alkaliphilic fungi (mainly Penicillium and Aspergillus) and bacteria (mainly Bacillus and Micrococcus) were isolated in all samples. Microbial growth and diversification were higher under Tropical climate, due to heavier rainfall. The influence of the bacterial activity on the hardening of samples has also been discussed here and related with the formation and stabilisation of vaterite in hemp-lime mixes. This study has demonstrated that hemp-lime renders show good durability towards a wide range of environmental conditions and factors. However, it might be useful to take some specific preventive and maintenance measures to reduce the bio-receptivity of this material, thus ensuring a longer durability on site. Copyright © 2015 Elsevier B.V. All rights reserved.

Survey and Restoration

NASA Astrophysics Data System (ADS)

Mileto, C.; Vegas, F.

2017-05-01

In addition to the technological evolution over the last two centuries, survey has experienced two main conceptual leaps: the introduction of photography as a tool for an indiscriminate register for reality, and the shift from autographic to allographic survey, phenomena which can generate a distancing effect within the restoration process. Besides, this text presents the relationship between survey in its numerous forms and technologies (manual and semi-manual to more complex ones like scanner-laser) and the restoration of the building, either for establishing a diagnosis, operating or valorizating, illustrating it with examples developed by the authors, as well as the criteria to be applied when documenting a building to be restored, irrespective of the means and technology available in each case.

23. SOUTHWEST CORNER OF BUILDING 220 (ENTRY CONTROL BUILDING) IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. SOUTHWEST CORNER OF BUILDING 220 (ENTRY CONTROL BUILDING) IN ASSEMBLY AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

22. NORTH ELEVATION OF BUILDING 220 (ENTRY CONTROL BUILDING) IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. NORTH ELEVATION OF BUILDING 220 (ENTRY CONTROL BUILDING) IN ASSEMBLY AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

40. NORTHWEST FRONT ELEVATION OF BUILDING 269 (PAINT BUILDING) IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. NORTHWEST FRONT ELEVATION OF BUILDING 269 (PAINT BUILDING) IN ASSEMBLY AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

17. NORTHEAST CORNER OF BUILDING 345 (ENTRY CONTROL BUILDING) IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. NORTHEAST CORNER OF BUILDING 345 (ENTRY CONTROL BUILDING) IN STORAGE AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

15. Historic American Buildings Survey E. W. Russell, Photographer, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Historic American Buildings Survey E. W. Russell, Photographer, May 8, 1936 CLOSE-UP OF CORNICE ON REAR OF BUILDING - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

Demonstration of reduced-order urban scale building energy models

DOE PAGES

Heidarinejad, Mohammad; Mattise, Nicholas; Dahlhausen, Matthew; ...

2017-09-08

The aim of this study is to demonstrate a developed framework to rapidly create urban scale reduced-order building energy models using a systematic summary of the simplifications required for the representation of building exterior and thermal zones. These urban scale reduced-order models rely on the contribution of influential variables to the internal, external, and system thermal loads. OpenStudio Application Programming Interface (API) serves as a tool to automate the process of model creation and demonstrate the developed framework. The results of this study show that the accuracy of the developed reduced-order building energy models varies only up to 10% withmore » the selection of different thermal zones. In addition, to assess complexity of the developed reduced-order building energy models, this study develops a novel framework to quantify complexity of the building energy models. Consequently, this study empowers the building energy modelers to quantify their building energy model systematically in order to report the model complexity alongside the building energy model accuracy. An exhaustive analysis on four university campuses suggests that the urban neighborhood buildings lend themselves to simplified typical shapes. Specifically, building energy modelers can utilize the developed typical shapes to represent more than 80% of the U.S. buildings documented in the CBECS database. One main benefits of this developed framework is the opportunity for different models including airflow and solar radiation models to share the same exterior representation, allowing a unifying exchange data. Altogether, the results of this study have implications for a large-scale modeling of buildings in support of urban energy consumption analyses or assessment of a large number of alternative solutions in support of retrofit decision-making in the building industry.« less

Demonstration of reduced-order urban scale building energy models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heidarinejad, Mohammad; Mattise, Nicholas; Dahlhausen, Matthew

The aim of this study is to demonstrate a developed framework to rapidly create urban scale reduced-order building energy models using a systematic summary of the simplifications required for the representation of building exterior and thermal zones. These urban scale reduced-order models rely on the contribution of influential variables to the internal, external, and system thermal loads. OpenStudio Application Programming Interface (API) serves as a tool to automate the process of model creation and demonstrate the developed framework. The results of this study show that the accuracy of the developed reduced-order building energy models varies only up to 10% withmore » the selection of different thermal zones. In addition, to assess complexity of the developed reduced-order building energy models, this study develops a novel framework to quantify complexity of the building energy models. Consequently, this study empowers the building energy modelers to quantify their building energy model systematically in order to report the model complexity alongside the building energy model accuracy. An exhaustive analysis on four university campuses suggests that the urban neighborhood buildings lend themselves to simplified typical shapes. Specifically, building energy modelers can utilize the developed typical shapes to represent more than 80% of the U.S. buildings documented in the CBECS database. One main benefits of this developed framework is the opportunity for different models including airflow and solar radiation models to share the same exterior representation, allowing a unifying exchange data. Altogether, the results of this study have implications for a large-scale modeling of buildings in support of urban energy consumption analyses or assessment of a large number of alternative solutions in support of retrofit decision-making in the building industry.« less

A Snowy Entrance

NASA Image and Video Library

2016-10-27

This archival image was released as part of a gallery comparing JPL's past and present, commemorating the 80th anniversary of NASA's Jet Propulsion Laboratory on Oct. 31, 2016. This photograph from 1949 shows the main entrance gate to the Jet Propulsion Laboratory in Pasadena, California, after a snowstorm. To the left is JPL's administration building at the time (Building 67). Building 67 is the Materials Research Building today. The Space Flight Operations Facility (Building 230), which houses JPL's Mission Control, now stands over the parking area on the right. As the lab expanded, the main entrance gate moved farther south. http://photojournal.jpl.nasa.gov/catalog/PIA21118

Intersect between self-esteem and emotion regulation in narcissistic personality disorder - implications for alliance building and treatment.

PubMed

Ronningstam, Elsa

2017-01-01

Building an alliance with patients with pathological narcissism or narcissistic personality disorder, NPD, can be challenging and include avoidance, negative reactivity and disruptions. A main contributing factor can be the complex interaction between emotion and self-esteem regulation, which affects patients' ability to engage in a therapeutic alliance and treatment. Recent studies, especially in neuroscience have identified functional characteristic and compromises in self-esteem and emotion regulation related to NPD. Self-enhancement, hyper reactivity and need for control, which patients within the range of disordered narcissism often present, can have different roots and underpinnings that require thorough exploration in the process of building the therapeutic alliance and promote change in treatment. Clinical examples with treatment implications and strategies will be discussed to highlight both internal fluctuations and external features and shifts in narcissistic personality functioning.

Expanding uses of building information modeling in life-cycle construction projects.

PubMed

Hannele, Kerosuo; Reijo, Miettinen; Tarja, Mäki; Sami, Paavola; Jenni, Korpela; Teija, Rantala

2012-01-01

BIM is targeted at providing information about the entire building and a complete set of design documents and data stored in an integrated database. In this paper, we study the use of BIM in two life-cycle construction projects in Kuopio, Finland during 2011. The analysis of uses of BIM and their main problems will constitute a foundation for an intervention. We will focus on the following questions: (1) How different partners use the composite BIM model? (2) What are the major contradictions or problems in the BIM use? The preliminary findings reported in this study show that BIM has been adopted quite generally to design use but the old ways of collaboration seem to prevail, especially between designers and between designers and building sites. BIM has provided new means and demands for collaboration but expansive uses of BIM for providing new interactive processes across professional fields have not much come true.

11. BUILDING NO. 18 (ENGINEERING BUILDING), CENTER, IN RELATION TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. BUILDING NO. 18 (ENGINEERING BUILDING), CENTER, IN RELATION TO BUILDING NO. 19 (BENDING SHOP AND OVEN) AT FAR LEFT, AND TO THE WET BASIN AT FAR RIGHT. VIEW TO NORTH-NORTHWEST. - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

42. CONTEXT VIEW LOOKING WEST OF BUILDING 269 (PAINT BUILDING) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

42. CONTEXT VIEW LOOKING WEST OF BUILDING 269 (PAINT BUILDING) IN ASSEMBLY AREA SHOWING BUILDING 272 (STORAGE STRUCTURE A-2) IN BACKGROUND. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

Rotary roller of no. 2 seamless line in bays 19 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Rotary roller of no. 2 seamless line in bays 19 and 20 of the main pipe mill building looking north. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

Rotary roller mandrel of no. 2 seamless line in bays ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Rotary roller mandrel of no. 2 seamless line in bays 19 and 20 of the main pipe mill building looking south. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

Taylorwilson four roll straightener of the no. 1 seamless line ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Taylor-wilson four roll straightener of the no. 1 seamless line in bay 12 of the main pipe mill building. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

Looking north at the threading machine of the no. 1 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking north at the threading machine of the no. 1 seamless line in bay 11 of the main pipe mill building - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

INTERIOR SHOWING STAIRCASE TO SECOND FLOOR FROM MAIN LOBBY/RECEPTION AREA, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR SHOWING STAIRCASE TO SECOND FLOOR FROM MAIN LOBBY/RECEPTION AREA, VIEW FACING WEST-SOUTHWEST. - Naval Air Station Barbers Point, Control Tower & Aviation Operations Building, Near intersection of runways between Hangar 110 & Building 115, Ewa, Honolulu County, HI

Looking north at uing press of the submerged arc weld ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking north at u-ing press of the submerged arc weld (saw) line of the main pipe mill building, bay 7. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

Northern view of inside diameter welding station of the saw ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Northern view of inside diameter welding station of the saw line in bay9 of the main pipe mill building. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

51. CONTEXT VIEW LOOKING NORTHWEST OF BUILDING 365 (ARMAMENT TESTING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

51. CONTEXT VIEW LOOKING NORTHWEST OF BUILDING 365 (ARMAMENT TESTING BUILDING) IN BASE SPARES AREA WITH BUILDING 367 (ADMINISTRATIVE OFFICE BUILDING) IN MIDDLE GROUND AND BUILDING 368 (WAREHOUSE) IN BACKGROUND. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

50. EAST CORNER OF BUILDING 365 (ARMAMENT TESTING BUILDING) IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

50. EAST CORNER OF BUILDING 365 (ARMAMENT TESTING BUILDING) IN BASE SPARES AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

49. NORTHEAST FRONT ELEVATION OF BUILDING 365 (ARMAMENT TESTING BUILDING) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

49. NORTHEAST FRONT ELEVATION OF BUILDING 365 (ARMAMENT TESTING BUILDING) IN BASE SPARES AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

52. NORTHWEST FRONT ELEVATION OF BUILDING 367 (ADMINISTRATION OFFICE BUILDING) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

52. NORTHWEST FRONT ELEVATION OF BUILDING 367 (ADMINISTRATION OFFICE BUILDING) IN BASE SPARES AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

24. CONTEXT VIEW OF BUILDING 220 (ENTRY CONTROL BUILDING) LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. CONTEXT VIEW OF BUILDING 220 (ENTRY CONTROL BUILDING) LOOKING NORTH THROUGH SECURITY GATES. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

16. EAST FRONT ELEVATION OF BUILDING 345 (ENTRY CONTROL BUILDING) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. EAST FRONT ELEVATION OF BUILDING 345 (ENTRY CONTROL BUILDING) IN STORAGE AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

A Description of the Building Materials Data Base for Portland, Maine.

DTIC Science & Technology

1986-06-01

WORDS (Continue on reveree side if neceseary and Identify by block number)". Acid precipitation, , Data bases, Damage assessment, Environmental...protection) Damage from acid deposition, Portland, Maine Damage to buildings, - Statistical analysis, . 20. ASsrRACT (Conlaue a reverse e(A It n -cwery md...types and amounts of building surface materials ex- posed to acid deposition. The stratified, systematic, unaligned random sampling approach was used

Evaluation of building fundamental periods and effects of local geology on ground motion parameters in the Siracusa area, Italy

NASA Astrophysics Data System (ADS)

Panzera, Francesco; D'Amico, Sebastiano; Lombardo, Giuseppe; Longo, Emanuela

2016-07-01

The Siracusa area, located in the southeastern coast of Sicily (Italy), is mainly characterized by the outcropping of a limestone formation. This lithotype, which is overlain by soft sediments such as sandy clays and detritus, can be considered as the local bedrock. Records of ambient noise, processed through spectral ratio techniques, were used to assess the dynamic properties of a sample survey of both reinforced concrete and masonry buildings. The results show that experimental periods of existing buildings are always lower than those proposed by the European seismic code. This disagreement could be related to the role played by stiff masonry infills, as well as the influence of adjacent buildings, especially in downtown Siracusa. Numerical modeling was also used to study the effect of local geology on the seismic site response of the Siracusa area. Seismic urban scenarios were simulated considering a moderate magnitude earthquake (December 13th, 1990) to assess the shaking level of the different outcropping formations. Spectral acceleration at different periods, peak ground acceleration, and velocity were obtained through a stochastic approach adopting an extended source model code. Seismic ground motion scenario highlighted that amplification mainly occurs in the sedimentary deposits that are widespread to the south of the study area as well as on some spot areas where coarse detritus and sandy clay outcrop. On the other hand, the level of shaking appears moderate in all zones with outcropping limestone and volcanics.

Avalanche risk assessment - a multi-temporal approach, results from Galtür, Austria

NASA Astrophysics Data System (ADS)

Keiler, M.; Sailer, R.; Jörg, P.; Weber, C.; Fuchs, S.; Zischg, A.; Sauermoser, S.

2006-07-01

Snow avalanches pose a threat to settlements and infrastructure in alpine environments. Due to the catastrophic events in recent years, the public is more aware of this phenomenon. Alpine settlements have always been confronted with natural hazards, but changes in land use and in dealing with avalanche hazards lead to an altering perception of this threat. In this study, a multi-temporal risk assessment is presented for three avalanche tracks in the municipality of Galtür, Austria. Changes in avalanche risk as well as changes in the risk-influencing factors (process behaviour, values at risk (buildings) and vulnerability) between 1950 and 2000 are quantified. An additional focus is put on the interconnection between these factors and their influence on the resulting risk. The avalanche processes were calculated using different simulation models (SAMOS as well as ELBA+). For each avalanche track, different scenarios were calculated according to the development of mitigation measures. The focus of the study was on a multi-temporal risk assessment; consequently the used models could be replaced with other snow avalanche models providing the same functionalities. The monetary values of buildings were estimated using the volume of the buildings and average prices per cubic meter. The changing size of the buildings over time was inferred from construction plans. The vulnerability of the buildings is understood as a degree of loss to a given element within the area affected by natural hazards. A vulnerability function for different construction types of buildings that depends on avalanche pressure was used to assess the degree of loss. No general risk trend could be determined for the studied avalanche tracks. Due to the high complexity of the variations in risk, small changes of one of several influencing factors can cause considerable differences in the resulting risk. This multi-temporal approach leads to better understanding of the today's risk by identifying the main changes and the underlying processes. Furthermore, this knowledge can be implemented in strategies for sustainable development in Alpine settlements.

A Novel College Network Resource Management Method using Cloud Computing

NASA Astrophysics Data System (ADS)

Lin, Chen

At present information construction of college mainly has construction of college networks and management information system; there are many problems during the process of information. Cloud computing is development of distributed processing, parallel processing and grid computing, which make data stored on the cloud, make software and services placed in the cloud and build on top of various standards and protocols, you can get it through all kinds of equipments. This article introduces cloud computing and function of cloud computing, then analyzes the exiting problems of college network resource management, the cloud computing technology and methods are applied in the construction of college information sharing platform.

Building bridges from process R&D: from a customer-supplier relationship to full partnership.

PubMed

Federsel

2000-08-01

A new and forward-looking way of running process R&D is introduced that integrates this core business in an efficient manner into the network of activities in different disciplines, which constitute the arena for the development of pharmaceutical products. The interfaces with surrounding areas are discussed in addition to the novel organizational principles implemented in process R&D and the workflow emanating from this. Furthermore, the Tollgate model used to keep track of the progress in a project and the pre-study concept are presented in detail. Finally, the main differences between operating modes in the past and in the future are highlighted.

Effects of urban sprawl on agricultural land: a case study of Kahramanmaraş, Turkey.

PubMed

Doygun, Hakan

2009-11-01

The main objective of this study is to quantify areal loss of olive groves due to urban sprawl of the city of Kahramanmaraş, Turkey. Spatial changes were analysed by interpreting the digitized data derived from a black-white monoscopic aerial photograph taken in 1985, panchromatic IKONOS image of 2000 and two pan-sharpened Quickbird images of 2004 and 2006. Data obtained revealed that the area of olive groves decreased by 25% from 460.55 ha in 1985 to 344.46 in 2006, while the number of parcels increased from 170 to 445. Of the total areal loss, 60% was due to building constructions, with the rest being due to clear-cut for new residential gardens composed of exotic plants, new buildings, or new roads. Rapid population growth, increased land prices due to urban expansion, and abandonment of agricultural practices to construction of multi-storey buildings were the main causes of the process that transformed the olive groves into urbanized areas. Results pointed to an urgent need to (1) revise the national and municipal land management practices, (2) balance the gap between the short- and long-term economic benefits that urban and community development plans ignore, and (3) monitor land-use changes periodically by using high resolution satellite images.

Radar Interferometry for Monitoring the Vibration Characteristics of Buildings and Civil Structures: Recent Case Studies in Spain

PubMed Central

Luzi, Guido; Crosetto, Michele; Fernández, Enric

2017-01-01

The potential of a coherent microwave sensor to monitor the vibration characteristics of civil structures has been investigated in the past decade, and successful case studies have been published by different research teams. This remote sensing technique is based on the interferometric processing of real aperture radar acquisitions. Its capability to estimate, simultaneously and remotely, the displacement of different parts of the investigated structures, with high accuracy and repeatability, is its main advantage with respect to conventional sensors. A considerable amount of literature on this technique is available, including various case studies aimed at testing the ambient vibration of bridges, buildings, and towers. In the last years, this technique has been used in Spain for civil structures monitoring. In this paper, three examples of such case studies are described: the monitoring of the suspended bridge crossing the Ebro River at Amposta, the communications tower of Collserola in Barcelona, and an urban building located in Vilafranca del Penedès, a small town close to Barcelona. This paper summarizes the main outcomes of these case studies, underlining the advantages and limitations of the sensors currently available, and concluding with the possible improvements expected from the next generation of sensors. PMID:28338604

Southwest view of rotary hearth furnace of the no. 2 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Southwest view of rotary hearth furnace of the no. 2 seamless line in bays 17 and 18 of the main pipe mill building. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

Northwest view of rotary hearth furnace of the no. 2 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Northwest view of rotary hearth furnace of the no. 2 seamless line in bays 17 and 18 of the main pipe mill building. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

31 CFR 357.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... which the Federal Reserve Banks are not open for business. Department means the United States Department... inspection at the Department of the Treasury Library, Room 1428, Main Treasury Building, 1500 Pennsylvania... Treasury Library, Room 1428, Main Treasury Building, 1500 Pennsylvania Avenue, NW., Washington, DC 20220,or...

7. INTERIOR OF SECONDFLOOR MAIN SECTION OF BUILDING 321. VIEW ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. INTERIOR OF SECOND-FLOOR MAIN SECTION OF BUILDING 321. VIEW TO WEST. - Rocky Mountain Arsenal, Boiler Plant-Central Gas Heat Plant, 1022 feet South of December Seventh Avenue; 525 feet West of D Street, Commerce City, Adams County, CO

6. INTERIOR OF THIRDFLOOR MAIN SECTION OF BUILDING 321. VIEW ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR OF THIRD-FLOOR MAIN SECTION OF BUILDING 321. VIEW TO WEST. - Rocky Mountain Arsenal, Boiler Plant-Central Gas Heat Plant, 1022 feet South of December Seventh Avenue; 525 feet West of D Street, Commerce City, Adams County, CO

9. INTERIOR OF MAIN SECTION OF BUILDING 741/742. VIEW TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. INTERIOR OF MAIN SECTION OF BUILDING 741/742. VIEW TO WEST. - Rocky Mountain Arsenal, Refrigeration Napalm & Incendiary Bomb Warehouse-Bomb Filling, 825 feet South of December Seventh Avenue; 2425 feet East of D Street, Commerce City, Adams County, CO

10. INTERIOR OF MAIN SECTION OF BUILDING 741/742. VIEW TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. INTERIOR OF MAIN SECTION OF BUILDING 741/742. VIEW TO WEST. - Rocky Mountain Arsenal, Refrigeration Napalm & Incendiary Bomb Warehouse-Bomb Filling, 825 feet South of December Seventh Avenue; 2425 feet East of D Street, Commerce City, Adams County, CO

DETAIL VIEW ON THE MAIN ASSEMBLY LEVEL OF ELEVATOR SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW ON THE MAIN ASSEMBLY LEVEL OF ELEVATOR SHOWING THE DOUBLED COLUMN FOR THE BUILDING EXPANSION JOINT AT COLUMN LINE AA-18. - Offutt Air Force Base, Glenn L. Martin-Nebraska Bomber Plant, Building D, Peacekeeper Drive, Bellevue, Sarpy County, NE

General view of outside diameter welding stations of the saw ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of outside diameter welding stations of the saw line in bay 8 of the main pipe mill building looking northwest. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

2. Historic American Buildings Survey Robert J. Kelley, Photographer May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Historic American Buildings Survey Robert J. Kelley, Photographer May 1958 LOOKING NORTH - SHOWS SOUTH ELEVATION, MAIN HOUSE, ROOF OF NORTH ELEVATION AND WEST ELEVATION, WHOSE ROOF WAS RAISED IN RECENT TIMES - Burbank-Hatheway House, Main Street, Suffield, Hartford County, CT

69. INTERIOR, BUILDING 272 (PLUTONIUM STORAGE BUILDING) LOOKING SOUTHWEST THROUGH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

69. INTERIOR, BUILDING 272 (PLUTONIUM STORAGE BUILDING) LOOKING SOUTHWEST THROUGH DOOR-WAY INTO PLUTONIUM STORAGE AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

33. Historic American Buildings Survey E. W. Russell, Photographer, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

33. Historic American Buildings Survey E. W. Russell, Photographer, May 7, 1936 VIEW OF STAIR FROM 2nd STORY HALL, W. END OF BUILDING - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

Retrofitting solutions for two different occupancy levels of educational buildings in tropics

NASA Astrophysics Data System (ADS)

Yang, Junjing; Pantazaras, Alexandros; Lee, Siew Eang; Santamouris, Mattheos

2018-01-01

Within the multi-functionality of educational buildings, the energy conservation potential can be very different. In addition, among different retrofitting solutions investigated involving interventions on the building envelope, ventilation strategies, artificial lighting systems as well as equipment upgrading, different saving potential would come from different aspects. The opportunities for energy saving potential from the overall point of view and from the detailed aspect view of different retrofitting solutions would be very useful and important for building renovation decision making. This study presents a detailed retrofitting study of two different educational buildings. One represents a building with average occupancy variation and containing mainly offices and labs. The other one represents a building with high occupancy variation and containing mainly lecture rooms and studios. This comparison of the results gives an idea of the different energy saving potential for different types of educational buildings. Principal component analysis is also adopted to investigate the detailed performance of one of the buildings which is influenced stronger by these retrofitting solutions.

3. ROADWAY TO THE SOUTH OF BUILDING NO. 1. AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. ROADWAY TO THE SOUTH OF BUILDING NO. 1. AT FAR LEFT IS THE SHADOW OF BUILDING NO. 6 (WAREHOUSE). ALSO VISIBLE AT THE LEFT IS BUILDING NO. 4 (BOILER HOUSE), BUILDING NO. 3 (GATE HOUSE), AND BUILDING NO. 2 (OFFICE BUILDING). IN THE RIGHT FOREGROUND IS BUILDING NO. 10 (ELECTRICAL SERVICES AND SWITCHING STATION). - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

Building No. 9975B. Interior view looking north in large main ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building No. 9975-B. Interior view looking north in large main room of physical therapy clinic (closed in late 1993). Note windows on both walls. This room was photographed because the entire width of the building was visible. The interiors of all other Medical Attachment Barracks had been partitioned fully into offices and clinics. - Madigan Hospital, Medical Detachment Barracks, Bounded by Wilson & McKinley Avenues & Garfield & Lincoln Streets, Tacoma, Pierce County, WA

Looking south at the aetna standard piercer and mannesman rolls ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking south at the aetna standard piercer and mannesman rolls of the no. 2 seamless line in bay 19 of the main pipe mill building. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

30. Valves under central corridor of filtration bed building. Main ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. Valves under central corridor of filtration bed building. Main flood valves is at left and crossover valve is a right. - Lake Whitney Water Filtration Plant, Filtration Plant, South side of Armory Street between Edgehill Road & Whitney Avenue, Hamden, New Haven County, CT

2. VIEW TO THE SOUTHWEST OF THE MAIN EMAD BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW TO THE SOUTHWEST OF THE MAIN E-MAD BUILDING WITH THE COLD BAY ON THE EAST (LEFT) AND THE HOT BAY ON THE WEST (RIGHT). - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

29. Photocopy of photograph, ca. 1930 (original print on file ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. Photocopy of photograph, ca. 1930 (original print on file at U.S. Army Intelligence Security Command, Fort Belvoir, Virginia). VIEW TO SOUTHEAST OF MAIN BUILDING OF ARLINGTON HALL JUNIOR COLLEGE. - Arlington Hall Station, Main Building, 4000 Arlington Boulevard, Arlington, Arlington County, VA

5. INTERIOR OF SECONDAND THIRDFLOOR MAIN SECTION OF BUILDING 321. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INTERIOR OF SECOND-AND THIRD-FLOOR MAIN SECTION OF BUILDING 321. VIEW TO WEST. - Rocky Mountain Arsenal, Boiler Plant-Central Gas Heat Plant, 1022 feet South of December Seventh Avenue; 525 feet West of D Street, Commerce City, Adams County, CO

71. INTERIOR, BUILDING 272 (PLUTONIUM STORAGE BUILDING) LOOKING NORTHEAST INTO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

71. INTERIOR, BUILDING 272 (PLUTONIUM STORAGE BUILDING) LOOKING NORTHEAST INTO PLUTONIUM STORAGE ROOM SHOWING CUBICLES FOR STORAGE. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

70. INTERIOR, BUILDING 272 (PLUTONIUM STORAGE BUILDING) LOOKING WEST INTO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

70. INTERIOR, BUILDING 272 (PLUTONIUM STORAGE BUILDING) LOOKING WEST INTO STORAGE AREA SHOWING THE FOUR STORAGE ROOM ENTRANCES. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

VIEW OF INTERIOR OF BUILDING 112. BUILDING 112 HAS BEEN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF INTERIOR OF BUILDING 112. BUILDING 112 HAS BEEN USED FOR EVENTS SUCH AS RETIREMENT PARTIES, AND FOR OFF-HOUR MEETINGS. (12/19/57) - Rocky Flats Plant, General Cafeteria, Main entrance on Highway 93, Golden, Jefferson County, CO

17. Historic American Buildings Survey E. W. Russell, Photographer, May ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Historic American Buildings Survey E. W. Russell, Photographer, May 7, 1936 GENERAL VIEW OF PORTICO (OR ARCADE) LOOKING WEST, 1st FLOOR OF ADMINISTRATION BUILDING - Spring Hill College, Main Building, Old Shell Road, Spring Hill, Mobile County, AL

Hazardous Waste Cleanup: Republic Environmental Systems in Farmingdale, New York

EPA Pesticide Factsheets

The Republic Environmental Systems facility was located in an area of industrial and commercial properties. The facility was surrounded by a perimeter fence and consisted of two main buildings (Building 1 and Building 2) and a small maintenance building

2. Historic American Buildings Survey W. N. Manning, Photographer, March ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Historic American Buildings Survey W. N. Manning, Photographer, March 23, 1934. FRONT VIEW. - SOUTHWEST - Summerfield College, Music Building, Main & College Streets, Summerfield, Dallas County, AL

Validation of Point Clouds Segmentation Algorithms Through Their Application to Several Case Studies for Indoor Building Modelling

NASA Astrophysics Data System (ADS)

Macher, H.; Landes, T.; Grussenmeyer, P.

2016-06-01

Laser scanners are widely used for the modelling of existing buildings and particularly in the creation process of as-built BIM (Building Information Modelling). However, the generation of as-built BIM from point clouds involves mainly manual steps and it is consequently time consuming and error-prone. Along the path to automation, a three steps segmentation approach has been developed. This approach is composed of two phases: a segmentation into sub-spaces namely floors and rooms and a plane segmentation combined with the identification of building elements. In order to assess and validate the developed approach, different case studies are considered. Indeed, it is essential to apply algorithms to several datasets and not to develop algorithms with a unique dataset which could influence the development with its particularities. Indoor point clouds of different types of buildings will be used as input for the developed algorithms, going from an individual house of almost one hundred square meters to larger buildings of several thousand square meters. Datasets provide various space configurations and present numerous different occluding objects as for example desks, computer equipments, home furnishings and even wine barrels. For each dataset, the results will be illustrated. The analysis of the results will provide an insight into the transferability of the developed approach for the indoor modelling of several types of buildings.

An ontological case base engineering methodology for diabetes management.

PubMed

El-Sappagh, Shaker H; El-Masri, Samir; Elmogy, Mohammed; Riad, A M; Saddik, Basema

2014-08-01

Ontology engineering covers issues related to ontology development and use. In Case Based Reasoning (CBR) system, ontology plays two main roles; the first as case base and the second as domain ontology. However, the ontology engineering literature does not provide adequate guidance on how to build, evaluate, and maintain ontologies. This paper proposes an ontology engineering methodology to generate case bases in the medical domain. It mainly focuses on the research of case representation in the form of ontology to support the case semantic retrieval and enhance all knowledge intensive CBR processes. A case study on diabetes diagnosis case base will be provided to evaluate the proposed methodology.

Recovery technologies for building materials

NASA Astrophysics Data System (ADS)

Karu, Veiko; Nurme, Martin; Valgma, Ingo

2015-04-01

Mining industry provides building materials for construction. Civil engineers have settled the quality parameters for construction materials. When we produce high quality building materials from carbonate rock (limestone, dolostone), then the estimated waste share is 25% to 30%, depending on crushing principles and rock quality. The challenge is to find suitable technology for waste recovery. During international mining waste related cooperation project MIN-NOVATION (www.min-novation.eu), partners mapped possibilities for waste recovery in mining industry and pointed out good examples and case studies. One example from Estonia showed that when we produce limestone aggregate, then we produce up to 30% waste material (fines with size 0-4mm). This waste material we can see as secondary raw material for building materials. Recovery technology for this fine grained material has been achieved with CDE separation plant. During the process the plant washes out minus 63 micron material from the limestone fines. This technology allows us to use 92% of all limestone reserves. By-product from 63 microns to 4 mm we can use as filler in concrete or as fine limestone aggregate for building or building materials. MIN-NOVATION project partners also established four pilot stations to study other mineral waste recovery technologies and solutions. Main aims on this research are to find the technology for recovery of mineral wastes and usage for new by-products from mineral mining waste. Before industrial production, testing period or case studies are needed. This research is part of the study of Sustainable and environmentally acceptable Oil shale mining No. 3.2.0501.11-0025 http://mi.ttu.ee/etp and the project B36 Extraction and processing of rock with selective methods - http://mi.ttu.ee/separation; http://mi.ttu.ee/miningwaste/

24 CFR 891.745 - Replacement reserve.

Code of Federal Regulations, 2012 CFR

2012-04-01

... section, total structures include main buildings, accessory buildings, garages, and other buildings. The... cost of the total structures (for new construction projects), 0.4 percent of the cost of the initial...

24 CFR 891.745 - Replacement reserve.

Code of Federal Regulations, 2014 CFR

2014-04-01

... section, total structures include main buildings, accessory buildings, garages, and other buildings. The... cost of the total structures (for new construction projects), 0.4 percent of the cost of the initial...

24 CFR 891.745 - Replacement reserve.

Code of Federal Regulations, 2011 CFR

2011-04-01

... section, total structures include main buildings, accessory buildings, garages, and other buildings. The... cost of the total structures (for new construction projects), 0.4 percent of the cost of the initial...

24 CFR 891.745 - Replacement reserve.

Code of Federal Regulations, 2013 CFR

2013-04-01

... section, total structures include main buildings, accessory buildings, garages, and other buildings. The... cost of the total structures (for new construction projects), 0.4 percent of the cost of the initial...

24 CFR 891.745 - Replacement reserve.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section, total structures include main buildings, accessory buildings, garages, and other buildings. The... cost of the total structures (for new construction projects), 0.4 percent of the cost of the initial...

1. Historic American Buildings Survey W. N. Manning, Photographer, Feb. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Historic American Buildings Survey W. N. Manning, Photographer, Feb. 3, 1934. FRONT VIEW. - SOUTH ELEVATION - Summerfield College, Music Building, Main & College Streets, Summerfield, Dallas County, AL

Facts and Narrative - the Concept of 4d Capturing of Heritage Building; a Case Study of Sompur Mahavihara, Bangladesh

NASA Astrophysics Data System (ADS)

Rashid, Md. M.; Rahaman, H.

2013-07-01

This study embarked upon a premise that considers architecture of building as a dynamic phenomenon. A building from its conception is susceptible to change due to various reasons. An historical building that is several hundred years old must have undergone through changes due to political, social, religious and most importantly functional reasons. Hence capturing building and its dynamic evolution is necessary to appreciate its architecture as well as its heritage value. Whereas the conventional method of fact based historiography only captures the building in particular moment. It makes architectural historians to become perplexed over to which particular moment to be documented. It is a great challenge for the architectural historians to bring back these dynamic characters of the building that are mostly inconspicuous in nature from this point of time. In this situation the historical discourse also remains elusive and blurred. The idea of 4d capturing comes in front in this scenario. Current research would venture into this emerging idea to record the architecture of the early period. This paper highlights the need for a flexible tool to capture this dynamic character of the building. By citing the case study of the 7th century Buddhist Monastery in Bengal, this paper thus argues for the need of capturing the narrative of a historical building than the facts to get a complete picture of its architecture. This study aims at capturing the narrative of Sompur Mahavihara, the UNESCO World Heritage site in Bangladesh, which is currently in ruinous condition. However, it's few hundred years life suggests that as architecture it was subject to change due to different reasons, mainly political, religious and rituals. Being a monument that belongs to the flourishing phase of a society, traditionally this monastery architecture certainly played a role as a stage for religious and political pageantry as well as different religious performances. As architecture it works as complex process of interaction of different layers of ideas, agendas and authorship through time. This paper would further explore different tools for historians to capturing this process of interaction and preserving/ conserving the narrative of this building using virtual modelling.

41. CONTEXT VIEW LOOKING EAST OF BUILDING 269 (PAINT BUILDING) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

41. CONTEXT VIEW LOOKING EAST OF BUILDING 269 (PAINT BUILDING) IN ASSEMBLY AREA SHOWING ROW OF IGLOOS IN BACKGROUND. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

31 CFR 357.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... any day other than a Saturday, Sunday, or other day on which the Federal Reserve Banks are not open... inspection at the Department of the Treasury Library, Room 1428, Main Treasury Building, 1500 Pennsylvania... Treasury Library, Room 1428, Main Treasury Building, 1500 Pennsylvania Avenue, NW., Washington, DC 20220,or...

A Framework for Text Mining in Scientometric Study: A Case Study in Biomedicine Publications

NASA Astrophysics Data System (ADS)

Silalahi, V. M. M.; Hardiyati, R.; Nadhiroh, I. M.; Handayani, T.; Rahmaida, R.; Amelia, M.

2018-04-01

The data of Indonesians research publications in the domain of biomedicine has been collected to be text mined for the purpose of a scientometric study. The goal is to build a predictive model that provides a classification of research publications on the potency for downstreaming. The model is based on the drug development processes adapted from the literatures. An effort is described to build the conceptual model and the development of a corpus on the research publications in the domain of Indonesian biomedicine. Then an investigation is conducted relating to the problems associated with building a corpus and validating the model. Based on our experience, a framework is proposed to manage the scientometric study based on text mining. Our method shows the effectiveness of conducting a scientometric study based on text mining in order to get a valid classification model. This valid model is mainly supported by the iterative and close interactions with the domain experts starting from identifying the issues, building a conceptual model, to the labelling, validation and results interpretation.

Analysis of Software Development Methodologies to Build Safety Software Applications for the SATEX-II: A Mexican Experimental Satellite

NASA Astrophysics Data System (ADS)

Aguilar Cisneros, Jorge; Vargas Martinez, Hector; Pedroza Melendez, Alejandro; Alonso Arevalo, Miguel

2013-09-01

Mexico is a country where the experience to build software for satellite applications is beginning. This is a delicate situation because in the near future we will need to develop software for the SATEX-II (Mexican Experimental Satellite). SATEX- II is a SOMECyTA's project (the Mexican Society of Aerospace Science and Technology). We have experienced applying software development methodologies, like TSP (Team Software Process) and SCRUM in other areas. Then, we analyzed these methodologies and we concluded: these can be applied to develop software for the SATEX-II, also, we supported these methodologies with SSP-05-0 Standard in particular with ESA PSS-05-11. Our analysis was focusing on main characteristics of each methodology and how these methodologies could be used with the ESA PSS 05-0 Standards. Our outcomes, in general, may be used by teams who need to build small satellites, but, in particular, these are going to be used when we will build the on board software applications for the SATEX-II.

Lightning attachment process to common buildings

NASA Astrophysics Data System (ADS)

Saba, M. M. F.; Paiva, A. R.; Schumann, C.; Ferro, M. A. S.; Naccarato, K. P.; Silva, J. C. O.; Siqueira, F. V. C.; Custódio, D. M.

2017-05-01

The physical mechanism of lightning attachment to grounded structures is one of the most important issues in lightning physics research, and it is the basis for the design of the lightning protection systems. Most of what is known about the attachment process comes from leader propagation models that are mostly based on laboratory observations of long electrical discharges or from observations of lightning attachment to tall structures. In this paper we use high-speed videos to analyze the attachment process of downward lightning flashes to an ordinary residential building. For the first time, we present characteristics of the attachment process to common structures that are present in almost every city (in this case, two buildings under 60 m in São Paulo City, Brazil). Parameters like striking distance and connecting leaders speed, largely used in lightning attachment models and in lightning protection standards, are revealed in this work.